From 60bd940f142741092b95a2e572f81741dc867545 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 9 Mar 2010 12:25:36 -0500 Subject: serial: bfin_sport_uart: drop useless status masks These were all copied over from the Blackfin UART driver, but they don't make sense here because these bits are all specific to the Blackfin UART. Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bfin_sport_uart.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 6ee73da6976..b9938acb030 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -500,27 +500,12 @@ static void sport_set_termios(struct uart_port *port, spin_lock_irqsave(&up->port.lock, flags); - port->read_status_mask = OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (FE | PE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BI; + port->read_status_mask = 0; /* * Characters to ignore */ port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= FE | PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= OE; - } /* RX extract mask */ up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); -- cgit v1.2.3-70-g09d2