From 84e2d34004dcd0c90d1af43a143511b334f11a4d Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Tue, 29 Jul 2008 08:38:55 +0200
Subject: pcmcia: use pcmcia_loop_config in misc pcmcia drivers

Use the config loop helper in misc pcmcia drivers.

CC: Harald Welte <laforge@gnumonks.org>
CC: <linux-parport@lists.infradead.org>
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Ed Okerson <eokerson@quicknet.net>
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/serial/serial_cs.c | 262 ++++++++++++++++++---------------------------
 1 file changed, 107 insertions(+), 155 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 164d2a42eb5..ac60cd28841 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -439,43 +439,55 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 	return pcmcia_parse_tuple(handle, tuple, parse);
 }
 
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
+/*====================================================================*/
+
+static int simple_config_check(struct pcmcia_device *p_dev,
+			       cistpl_cftable_entry_t *cf,
+			       void *priv_data)
 {
-	int i;
-	i = pcmcia_get_next_tuple(handle, tuple);
-	if (i != CS_SUCCESS)
-		return CS_NO_MORE_ITEMS;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != CS_SUCCESS)
-		return i;
-	return pcmcia_parse_tuple(handle, tuple, parse);
+	static const int size_table[2] = { 8, 16 };
+	int *try = priv_data;
+
+	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp =
+			cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+	if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
+	    && (cf->io.win[0].base != 0)) {
+		p_dev->conf.ConfigIndex = cf->index;
+		p_dev->io.BasePort1 = cf->io.win[0].base;
+		p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
+			16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+		if (!pcmcia_request_io(p_dev, &p_dev->io))
+			return 0;
+	}
+	return -EINVAL;
 }
 
-/*====================================================================*/
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+					cistpl_cftable_entry_t *cf,
+					void *priv_data)
+{
+	static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+	int j;
+
+	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+		p_dev->conf.ConfigIndex = cf->index;
+		for (j = 0; j < 5; j++) {
+			p_dev->io.BasePort1 = base[j];
+			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+			if (!pcmcia_request_io(p_dev, &p_dev->io))
+				return 0;
+		}
+	}
+	return -ENODEV;
+}
 
 static int simple_config(struct pcmcia_device *link)
 {
-	static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
-	static const int size_table[2] = { 8, 16 };
 	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
 	config_info_t config;
-	int i, j, try;
-	int s;
-
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		return -1;
-
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
+	int i, try;
 
 	/* If the card is already configured, look up the port and irq */
 	i = pcmcia_get_configuration_info(link, &config);
@@ -490,70 +502,28 @@ static int simple_config(struct pcmcia_device *link)
 			info->slave = 1;
 		}
 		if (info->slave) {
-			kfree(cfg_mem);
 			return setup_serial(link, info, port, config.AssignedIRQ);
 		}
 	}
 
-	/* First pass: look for a config entry that looks normal. */
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-	tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	/* Two tries: without IO aliases, then with aliases */
-	for (s = 0; s < 2; s++) {
-		for (try = 0; try < 2; try++) {
-			i = first_tuple(link, tuple, parse);
-			while (i != CS_NO_MORE_ITEMS) {
-				if (i != CS_SUCCESS)
-					goto next_entry;
-				if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
-					link->conf.Vpp =
-					    cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-				if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
-					    (cf->io.win[0].base != 0)) {
-					link->conf.ConfigIndex = cf->index;
-					link->io.BasePort1 = cf->io.win[0].base;
-					link->io.IOAddrLines = (try == 0) ?
-					    16 : cf->io.flags & CISTPL_IO_LINES_MASK;
-					i = pcmcia_request_io(link, &link->io);
-					if (i == CS_SUCCESS)
-						goto found_port;
-				}
-next_entry:
-				i = next_tuple(link, tuple, parse);
-			}
-		}
-	}
+	/* First pass: look for a config entry that looks normal.
+	 * Two tries: without IO aliases, then with aliases */
+	for (try = 0; try < 4; try++)
+		if (!pcmcia_loop_config(link, simple_config_check, &try))
+			goto found_port;
+
 	/* Second pass: try to find an entry that isn't picky about
 	   its base address, then try to grab any standard serial port
 	   address, and finally try to get any free port. */
-	i = first_tuple(link, tuple, parse);
-	while (i != CS_NO_MORE_ITEMS) {
-		if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
-		    ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-			link->conf.ConfigIndex = cf->index;
-			for (j = 0; j < 5; j++) {
-				link->io.BasePort1 = base[j];
-				link->io.IOAddrLines = base[j] ? 16 : 3;
-				i = pcmcia_request_io(link, &link->io);
-				if (i == CS_SUCCESS)
-					goto found_port;
-			}
-		}
-		i = next_tuple(link, tuple, parse);
-	}
+	if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+		goto found_port;
 
-      found_port:
-	if (i != CS_SUCCESS) {
-		printk(KERN_NOTICE
-		       "serial_cs: no usable port range found, giving up\n");
-		cs_error(link, RequestIO, i);
-		kfree(cfg_mem);
-		return -1;
-	}
+	printk(KERN_NOTICE
+	       "serial_cs: no usable port range found, giving up\n");
+	cs_error(link, RequestIO, i);
+	return -1;
 
+found_port:
 	i = pcmcia_request_irq(link, &link->irq);
 	if (i != CS_SUCCESS) {
 		cs_error(link, RequestIRQ, i);
@@ -571,86 +541,72 @@ next_entry:
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != CS_SUCCESS) {
 		cs_error(link, RequestConfiguration, i);
-		kfree(cfg_mem);
 		return -1;
 	}
-	kfree(cfg_mem);
 	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
-static int multi_config(struct pcmcia_device * link)
+static int multi_config_check(struct pcmcia_device *p_dev,
+			      cistpl_cftable_entry_t *cf,
+			      void *priv_data)
 {
-	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
-	int i, rc, base2 = 0;
+	int *base2 = priv_data;
+
+	/* The quad port cards have bad CIS's, so just look for a
+	   window larger than 8 ports and assume it will be right */
+	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+		p_dev->conf.ConfigIndex = cf->index;
+		p_dev->io.BasePort1 = cf->io.win[0].base;
+		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+		if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+			*base2 = p_dev->io.BasePort1 + 8;
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
 
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		return -1;
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+				       cistpl_cftable_entry_t *cf,
+				       void *priv_data)
+{
+	int *base2 = priv_data;
+
+	if (cf->io.nwin == 2) {
+		p_dev->conf.ConfigIndex = cf->index;
+		p_dev->io.BasePort1 = cf->io.win[0].base;
+		p_dev->io.BasePort2 = cf->io.win[1].base;
+		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+		if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+			*base2 = p_dev->io.BasePort2;
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
 
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-	tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+static int multi_config(struct pcmcia_device *link)
+{
+	struct serial_info *info = link->priv;
+	int i, base2 = 0;
 
 	/* First, look for a generic full-sized window */
 	link->io.NumPorts1 = info->multi * 8;
-	i = first_tuple(link, tuple, parse);
-	while (i != CS_NO_MORE_ITEMS) {
-		/* The quad port cards have bad CIS's, so just look for a
-		   window larger than 8 ports and assume it will be right */
-		if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
-		    (cf->io.win[0].len > 8)) {
-			link->conf.ConfigIndex = cf->index;
-			link->io.BasePort1 = cf->io.win[0].base;
-			link->io.IOAddrLines =
-			    cf->io.flags & CISTPL_IO_LINES_MASK;
-			i = pcmcia_request_io(link, &link->io);
-			base2 = link->io.BasePort1 + 8;
-			if (i == CS_SUCCESS)
-				break;
-		}
-		i = next_tuple(link, tuple, parse);
-	}
-
-	/* If that didn't work, look for two windows */
-	if (i != CS_SUCCESS) {
+	if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+		/* If that didn't work, look for two windows */
 		link->io.NumPorts1 = link->io.NumPorts2 = 8;
 		info->multi = 2;
-		i = first_tuple(link, tuple, parse);
-		while (i != CS_NO_MORE_ITEMS) {
-			if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
-				link->conf.ConfigIndex = cf->index;
-				link->io.BasePort1 = cf->io.win[0].base;
-				link->io.BasePort2 = cf->io.win[1].base;
-				link->io.IOAddrLines =
-				    cf->io.flags & CISTPL_IO_LINES_MASK;
-				i = pcmcia_request_io(link, &link->io);
-				base2 = link->io.BasePort2;
-				if (i == CS_SUCCESS)
-					break;
-			}
-			i = next_tuple(link, tuple, parse);
+		if (pcmcia_loop_config(link, multi_config_check_notpicky,
+				       &base2)) {
+			printk(KERN_NOTICE "serial_cs: no usable port range"
+			       "found, giving up\n");
+			return -ENODEV;
 		}
 	}
 
-	if (i != CS_SUCCESS) {
-		cs_error(link, RequestIO, i);
-		rc = -1;
-		goto free_cfg_mem;
-	}
-
 	i = pcmcia_request_irq(link, &link->irq);
 	if (i != CS_SUCCESS) {
+		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
 		cs_error(link, RequestIRQ, i);
@@ -666,8 +622,7 @@ static int multi_config(struct pcmcia_device * link)
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != CS_SUCCESS) {
 		cs_error(link, RequestConfiguration, i);
-		rc = -1;
-		goto free_cfg_mem;
+		return -ENODEV;
 	}
 
 	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
@@ -678,7 +633,8 @@ static int multi_config(struct pcmcia_device * link)
 				info->prodid == PRODID_POSSIO_GCC)) {
 		int err;
 
-		if (cf->index == 1 || cf->index == 3) {
+		if (link->conf.ConfigIndex == 1 ||
+		    link->conf.ConfigIndex == 3) {
 			err = setup_serial(link, info, base2,
 					link->irq.AssignedIRQ);
 			base2 = link->io.BasePort1;
@@ -695,18 +651,14 @@ static int multi_config(struct pcmcia_device * link)
 		if (info->quirk && info->quirk->wakeup)
 			info->quirk->wakeup(link);
 
-		rc = 0;
-		goto free_cfg_mem;
+		return 0;
 	}
 
 	setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 	for (i = 0; i < info->multi - 1; i++)
 		setup_serial(link, info, base2 + (8 * i),
 				link->irq.AssignedIRQ);
-	rc = 0;
-free_cfg_mem:
-	kfree(cfg_mem);
-	return rc;
+	return 0;
 }
 
 /*======================================================================
-- 
cgit v1.2.3-70-g09d2


From 498ac1899b62626bf6879a251d75c22ec564c559 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 2 Aug 2008 14:59:13 +0200
Subject: pcmcia: pcmcia_config_loop() ConfigIndex unification

Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/ata/pata_pcmcia.c               | 1 -
 drivers/bluetooth/bt3c_cs.c             | 2 --
 drivers/bluetooth/btuart_cs.c           | 2 --
 drivers/bluetooth/dtl1_cs.c             | 1 -
 drivers/char/pcmcia/cm4000_cs.c         | 2 --
 drivers/char/pcmcia/cm4040_cs.c         | 2 --
 drivers/isdn/hardware/avm/avm_cs.c      | 1 -
 drivers/isdn/hisax/avma1_cs.c           | 1 -
 drivers/isdn/hisax/elsa_cs.c            | 2 --
 drivers/isdn/hisax/sedlbauer_cs.c       | 1 -
 drivers/isdn/hisax/teles_cs.c           | 2 --
 drivers/net/pcmcia/pcnet_cs.c           | 2 --
 drivers/net/pcmcia/smc91c92_cs.c        | 2 --
 drivers/net/pcmcia/xirc2ps_cs.c         | 2 --
 drivers/net/wireless/airo_cs.c          | 2 --
 drivers/net/wireless/atmel_cs.c         | 2 --
 drivers/net/wireless/hostap/hostap_cs.c | 1 -
 drivers/net/wireless/orinoco_cs.c       | 1 -
 drivers/net/wireless/spectrum_cs.c      | 1 -
 drivers/parport/parport_cs.c            | 1 -
 drivers/pcmcia/pcmcia_resource.c        | 8 ++++++--
 drivers/scsi/pcmcia/aha152x_stub.c      | 1 -
 drivers/scsi/pcmcia/fdomain_stub.c      | 1 -
 drivers/scsi/pcmcia/nsp_cs.c            | 2 --
 drivers/scsi/pcmcia/qlogic_stub.c       | 1 -
 drivers/scsi/pcmcia/sym53c500_cs.c      | 1 -
 drivers/serial/serial_cs.c              | 4 ----
 drivers/telephony/ixj_pcmcia.c          | 1 -
 drivers/usb/host/sl811_cs.c             | 2 --
 29 files changed, 6 insertions(+), 46 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 8cccd1b81ee..4b8bd2021a9 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -181,7 +181,6 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 
 	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
-		pdev->conf.ConfigIndex = cfg->index;
 		pdev->io.BasePort1 = io->win[0].base;
 		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 		if (!(io->flags & CISTPL_IO_16BIT))
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 6ec366f1cf7..3436be15248 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -688,7 +688,6 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 	    (cf->io.win[0].base != 0)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.IOAddrLines = (try == 0) ? 16 :
 			cf->io.flags & CISTPL_IO_LINES_MASK;
@@ -706,7 +705,6 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 	int j;
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		for (j = 0; j < 5; j++) {
 			p_dev->io.BasePort1 = base[j];
 			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 39cca285152..5e31ea2f2d6 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -617,7 +617,6 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 	    (cf->io.win[0].base != 0)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.IOAddrLines = (try == 0) ? 16 :
 			cf->io.flags & CISTPL_IO_LINES_MASK;
@@ -635,7 +634,6 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 	int j;
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		for (j = 0; j < 5; j++) {
 			p_dev->io.BasePort1 = base[j];
 			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index e30a6332c6c..1846e2aa9d4 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -595,7 +595,6 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev,
 			  void *priv_data)
 {
 	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.NumPorts1 = cf->io.win[0].len;	/*yo */
 		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 47adec480bd..7eafd2f4dbb 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1763,8 +1763,6 @@ static int cm4000_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       void *priv_data)
 {
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	if (!cfg->io.nwin)
 		return -ENODEV;
 
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index e0f5d8c9b26..71ca8c474c8 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -531,8 +531,6 @@ static int cm4040_config_check(struct pcmcia_device *p_dev,
 			       void *priv_data)
 {
 	int rc;
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	if (!cfg->io.nwin)
 		return -ENODEV;
 
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 7a1ead117d1..3569c68dc94 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -161,7 +161,6 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
 	if (cf->io.nwin <= 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cf->index;
 	p_dev->io.BasePort1 = cf->io.win[0].base;
 	p_dev->io.NumPorts1 = cf->io.win[0].len;
 	p_dev->io.NumPorts2 = 0;
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8142d9fc814..76164d6a3c8 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -181,7 +181,6 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
 	if (cf->io.nwin <= 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cf->index;
 	p_dev->io.BasePort1 = cf->io.win[0].base;
 	p_dev->io.NumPorts1 = cf->io.win[0].len;
 	p_dev->io.NumPorts2 = 0;
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 449800898dc..c9899e51a26 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -212,13 +212,11 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
 		printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		if (!pcmcia_request_io(p_dev, &p_dev->io))
 			return 0;
 	} else {
 		printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
-		p_dev->conf.ConfigIndex = cf->index;
 		for (j = 0x2f0; j > 0x100; j -= 0x10) {
 			p_dev->io.BasePort1 = j;
 			if (!pcmcia_request_io(p_dev, &p_dev->io))
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 0f80b5667ea..2c611f91cfb 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -233,7 +233,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
-	p_dev->conf.ConfigIndex = cfg->index;
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 2b063a2916f..ecb75ae8a39 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -202,13 +202,11 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
 		printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		if (!pcmcia_request_io(p_dev, &p_dev->io))
 			return 0;
 	} else {
 		printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
-		p_dev->conf.ConfigIndex = cf->index;
 		for (j = 0x2f0; j > 0x100; j -= 0x10) {
 			p_dev->io.BasePort1 = j;
 			if (!pcmcia_request_io(p_dev, &p_dev->io))
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 7a9eeca6adc..a6060872249 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -523,8 +523,6 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
 	if (cfg->index == 0 || cfg->io.nwin == 0)
 		return -EINVAL;
 
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	/* For multifunction cards, by convention, we configure the
 	   network function with window 0, and serial with window 1 */
 	if (io->nwin > 1) {
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index c012e340073..1e595038a49 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -464,7 +464,6 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				void *priv_data)
 {
 	int k;
-	p_dev->conf.ConfigIndex = cf->index;
 	p_dev->io.BasePort2 = cf->io.win[0].base;
 	for (k = 0; k < 0x400; k += 0x10) {
 		if (k & 0x80)
@@ -654,7 +653,6 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cf,
 			   void *priv_data)
 {
-	p_dev->conf.ConfigIndex = cf->index;
 	p_dev->io.BasePort1 = cf->io.win[0].base;
 	p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
 	return pcmcia_request_io(p_dev, &p_dev->io);
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b57f022952b..b0de704f229 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -724,7 +724,6 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
 
 	if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
 		for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-			p_dev->conf.ConfigIndex = cf->index ;
 			p_dev->io.BasePort2 = cf->io.win[0].base;
 			p_dev->io.BasePort1 = ioaddr;
 			if (!pcmcia_request_io(p_dev, &p_dev->io))
@@ -742,7 +741,6 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
 	int *pass = priv_data;
 
 	if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
-		p_dev->conf.ConfigIndex = cf->index ;
 		p_dev->io.BasePort2 = cf->io.win[0].base;
 		p_dev->io.BasePort1 = p_dev->io.BasePort2
 			+ (*pass ? (cf->index & 0x20 ? -24:8)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 4fbe811bebf..d7216730f18 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -223,8 +223,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 263c36f7ee2..12efd44d64a 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -234,8 +234,6 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 		*dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3d914dde5de..2abaa90b799 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -552,7 +552,6 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cfg->index;
 	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
 	       "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
 
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 473370c9e0d..67a172dfb2d 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -179,7 +179,6 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
-	p_dev->conf.ConfigIndex = cfg->index;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 8e1951cfc15..7536aa91dad 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -648,7 +648,6 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
-	p_dev->conf.ConfigIndex = cfg->index;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 636231739f4..814c5252d70 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -156,7 +156,6 @@ static int parport_config_check(struct pcmcia_device *p_dev,
 	cistpl_cftable_entry_t *dflt = priv_data;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->conf.ConfigIndex = cfg->index;
 		if (epp_mode)
 			p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
 		p_dev->io.BasePort1 = io->win[0].base;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 9f054bc847f..ba34ac8876f 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -953,14 +953,18 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 
 	ret = pcmcia_get_first_tuple(p_dev, tuple);
 	while (!ret) {
+		cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
+
 		if (pcmcia_get_tuple_data(p_dev, tuple))
 			goto next_entry;
 
 		if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse))
 			goto next_entry;
 
-		ret = conf_check(p_dev, &cfg_mem->parse.cftable_entry,
-				 priv_data);
+		/* default values */
+		p_dev->conf.ConfigIndex = cfg->index;
+
+		ret = conf_check(p_dev, cfg, priv_data);
 		if (!ret)
 			break;
 
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index bbcc20f2d9d..5e4d8e42ba0 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -152,7 +152,6 @@ static int aha152x_config_check(struct pcmcia_device *p_dev,
 		p_dev->io.BasePort1 = cfg->io.win[1].base;
 	if ((cfg->io.nwin > 0) &&
 	    (p_dev->io.BasePort1 < 0xffff)) {
-		p_dev->conf.ConfigIndex = cfg->index;
 		if (!pcmcia_request_io(p_dev, &p_dev->io))
 			return 0;
 	}
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index fefef7d81f1..e3d6937c920 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -127,7 +127,6 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  void *priv_data)
 {
-	p_dev->conf.ConfigIndex = cfg->index;
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
 	return pcmcia_request_io(p_dev, &p_dev->io);
 }
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index a29a6f29c97..aee24b745dc 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1626,8 +1626,6 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index aa9b9e0968b..a361275b20a 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -199,7 +199,6 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  void *priv_data)
 {
-	p_dev->conf.ConfigIndex = cfg->index;
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
 	p_dev->io.NumPorts1 = cfg->io.win[0].len;
 
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 15369d9e312..23a5219051a 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -704,7 +704,6 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  void *priv_data)
 {
-	p_dev->conf.ConfigIndex = cfg->index;
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
 	p_dev->io.NumPorts1 = cfg->io.win[0].len;
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ac60cd28841..69373816001 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -454,7 +454,6 @@ static int simple_config_check(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
 	    && (cf->io.win[0].base != 0)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
 			16 : cf->io.flags & CISTPL_IO_LINES_MASK;
@@ -472,7 +471,6 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 	int j;
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		for (j = 0; j < 5; j++) {
 			p_dev->io.BasePort1 = base[j];
 			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
@@ -555,7 +553,6 @@ static int multi_config_check(struct pcmcia_device *p_dev,
 	/* The quad port cards have bad CIS's, so just look for a
 	   window larger than 8 ports and assume it will be right */
 	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
 		if (!pcmcia_request_io(p_dev, &p_dev->io)) {
@@ -573,7 +570,6 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 	int *base2 = priv_data;
 
 	if (cf->io.nwin == 2) {
-		p_dev->conf.ConfigIndex = cf->index;
 		p_dev->io.BasePort1 = cf->io.win[0].base;
 		p_dev->io.BasePort2 = cf->io.win[1].base;
 		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index 89c5e40ce3a..ba2c7a2125a 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -132,7 +132,6 @@ static int ixj_config_check(struct pcmcia_device *p_dev,
 
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->conf.ConfigIndex = cfg->index;
 		p_dev->io.BasePort1 = io->win[0].base;
 		p_dev->io.NumPorts1 = io->win[0].len;
 		if (io->nwin == 2) {
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 9773601bf0b..5b55c72c710 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -172,8 +172,6 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->index == 0)
 		return -ENODEV;
 
-	p_dev->conf.ConfigIndex = cfg->index;
-
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-- 
cgit v1.2.3-70-g09d2


From 8e2fc39ddea7fe8c6798837da282db88a09af793 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 2 Aug 2008 15:30:31 +0200
Subject: pcmcia: pcmcia_config_loop() default CIS entry handling

Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/ata/pata_pcmcia.c               | 33 ++++++++++-----------
 drivers/bluetooth/bt3c_cs.c             |  2 ++
 drivers/bluetooth/btuart_cs.c           |  2 ++
 drivers/bluetooth/dtl1_cs.c             |  1 +
 drivers/char/pcmcia/cm4000_cs.c         |  1 +
 drivers/char/pcmcia/cm4040_cs.c         |  1 +
 drivers/ide/legacy/ide-cs.c             | 33 ++++++++++-----------
 drivers/isdn/hardware/avm/avm_cs.c      |  1 +
 drivers/isdn/hisax/avma1_cs.c           |  5 ++--
 drivers/isdn/hisax/elsa_cs.c            |  1 +
 drivers/isdn/hisax/sedlbauer_cs.c       | 26 ++++++++---------
 drivers/isdn/hisax/teles_cs.c           |  1 +
 drivers/net/pcmcia/axnet_cs.c           |  1 +
 drivers/net/pcmcia/pcnet_cs.c           |  1 +
 drivers/net/pcmcia/smc91c92_cs.c        |  2 ++
 drivers/net/pcmcia/xirc2ps_cs.c         |  2 ++
 drivers/net/wireless/airo_cs.c          | 51 ++++++++++++++-------------------
 drivers/net/wireless/atmel_cs.c         |  9 ++----
 drivers/net/wireless/hostap/hostap_cs.c | 24 +++++++---------
 drivers/net/wireless/orinoco_cs.c       | 18 ++++++------
 drivers/net/wireless/spectrum_cs.c      | 18 ++++++------
 drivers/parport/parport_cs.c            | 12 ++------
 drivers/pcmcia/pcmcia_resource.c        |  7 ++++-
 drivers/scsi/pcmcia/aha152x_stub.c      |  5 ++--
 drivers/scsi/pcmcia/fdomain_stub.c      |  5 ++--
 drivers/scsi/pcmcia/nsp_cs.c            | 23 +++++++--------
 drivers/scsi/pcmcia/qlogic_stub.c       |  5 ++--
 drivers/scsi/pcmcia/sym53c500_cs.c      |  1 +
 drivers/serial/serial_cs.c              |  4 +++
 drivers/telephony/ixj_pcmcia.c          |  8 ++----
 drivers/usb/host/sl811_cs.c             | 19 ++++++------
 include/pcmcia/cistpl.h                 |  1 +
 32 files changed, 158 insertions(+), 165 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 4b8bd2021a9..20982065a49 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -151,7 +151,6 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 struct pcmcia_config_check {
 	config_info_t conf;
-	cistpl_cftable_entry_t dflt;
 	unsigned long ctl_base;
 	int skip_vcc;
 	int is_kme;
@@ -159,6 +158,7 @@ struct pcmcia_config_check {
 
 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
 				   void *priv_data)
 {
 	struct pcmcia_config_check *stk = priv_data;
@@ -166,21 +166,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 	/* Check for matching Vcc, unless we're desperate */
 	if (!stk->skip_vcc) {
 		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				goto next_entry;
-		} else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
-				goto next_entry;
+			if (stk->conf.Vcc !=
+			    cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+				return -ENODEV;
+		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+			if (stk->conf.Vcc !=
+			    dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+				return -ENODEV;
 		}
 	}
 
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
-	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		pdev->io.BasePort1 = io->win[0].base;
 		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 		if (!(io->flags & CISTPL_IO_16BIT))
@@ -190,23 +192,19 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 			pdev->io.BasePort2 = io->win[1].base;
 			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
 			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				goto next_entry;
+				return -ENODEV;
 			stk->ctl_base = pdev->io.BasePort2;
 		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
 			pdev->io.NumPorts1 = io->win[0].len;
 			pdev->io.NumPorts2 = 0;
 			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				goto next_entry;
+				return -ENODEV;
 			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
 		} else
-			goto next_entry;
+			return -ENODEV;
 		/* If we've got this far, we're done */
 		return 0;
 	}
-next_entry:
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
-
 	return -ENODEV;
 }
 
@@ -264,7 +262,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
 	stk->skip_vcc = io_base = ctl_base = 0;
 	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
-		memset(&stk->dflt, 0, sizeof(stk->dflt));
 		stk->skip_vcc = 1;
 		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
 			goto failed; /* No suitable config found */
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 3436be15248..794a5ef9ea2 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -680,6 +680,7 @@ static void bt3c_detach(struct pcmcia_device *link)
 
 static int bt3c_check_config(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cf,
+			     cistpl_cftable_entry_t *dflt,
 			     void *priv_data)
 {
 	unsigned long try = (unsigned long) priv_data;
@@ -699,6 +700,7 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
 
 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 				      cistpl_cftable_entry_t *cf,
+				      cistpl_cftable_entry_t *dflt,
 				      void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 5e31ea2f2d6..32017f96067 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -609,6 +609,7 @@ static void btuart_detach(struct pcmcia_device *link)
 
 static int btuart_check_config(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	unsigned long try = (unsigned long) priv_data;
@@ -628,6 +629,7 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
 
 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 					cistpl_cftable_entry_t *cf,
+					cistpl_cftable_entry_t *dflt,
 					void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 1846e2aa9d4..1830ebd6ca7 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -592,6 +592,7 @@ static void dtl1_detach(struct pcmcia_device *link)
 
 static int dtl1_confcheck(struct pcmcia_device *p_dev,
 			  cistpl_cftable_entry_t *cf,
+			  cistpl_cftable_entry_t *dflt,
 			  void *priv_data)
 {
 	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 7eafd2f4dbb..7785fbb4c0f 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1761,6 +1761,7 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
 
 static int cm4000_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	if (!cfg->io.nwin)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 71ca8c474c8..468ddef916b 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -528,6 +528,7 @@ static void cm4040_reader_release(struct pcmcia_device *link)
 
 static int cm4040_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	int rc;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 8580becf226..cc8eeaf8027 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -222,7 +222,6 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 struct pcmcia_config_check {
 	config_info_t conf;
-	cistpl_cftable_entry_t dflt;
 	unsigned long ctl_base;
 	int skip_vcc;
 	int is_kme;
@@ -230,6 +229,7 @@ struct pcmcia_config_check {
 
 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
 				   void *priv_data)
 {
 	struct pcmcia_config_check *stk = priv_data;
@@ -237,21 +237,23 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 	/* Check for matching Vcc, unless we're desperate */
 	if (!stk->skip_vcc) {
 		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				goto next_entry;
-		} else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
-				goto next_entry;
+			if (stk->conf.Vcc !=
+			    cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+				return -ENODEV;
+		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+			if (stk->conf.Vcc !=
+			    dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+				return -ENODEV;
 		}
 	}
 
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
-	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		pdev->conf.ConfigIndex = cfg->index;
 		pdev->io.BasePort1 = io->win[0].base;
 		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
@@ -262,23 +264,19 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 			pdev->io.BasePort2 = io->win[1].base;
 			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
 			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				goto next_entry;
+				return -ENODEV;
 			stk->ctl_base = pdev->io.BasePort2;
 		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
 			pdev->io.NumPorts1 = io->win[0].len;
 			pdev->io.NumPorts2 = 0;
 			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				goto next_entry;
+				return -ENODEV;
 			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
 		} else
-			goto next_entry;
+			return -ENODEV;
 		/* If we've got this far, we're done */
 		return 0;
 	}
-next_entry:
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
-
 	return -ENODEV;
 }
 
@@ -305,7 +303,6 @@ static int ide_config(struct pcmcia_device *link)
     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
     stk->skip_vcc = io_base = ctl_base = 0;
     if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
-	    memset(&stk->dflt, 0, sizeof(stk->dflt));
 	    stk->skip_vcc = 1;
 	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
 		    goto failed; /* No suitable config found */
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 3569c68dc94..a8d6949338c 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -156,6 +156,7 @@ static void avmcs_detach(struct pcmcia_device *link)
 
 static int avmcs_configcheck(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cf,
+			     cistpl_cftable_entry_t *dflt,
 			     void *priv_data)
 {
 	if (cf->io.nwin <= 0)
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 76164d6a3c8..7ce1aabb0ae 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -175,8 +175,9 @@ static void avma1cs_detach(struct pcmcia_device *link)
 ======================================================================*/
 
 static int avma1cs_configcheck(struct pcmcia_device *p_dev,
-			     cistpl_cftable_entry_t *cf,
-			     void *priv_data)
+			       cistpl_cftable_entry_t *cf,
+			       cistpl_cftable_entry_t *dflt,
+			       void *priv_data)
 {
 	if (cf->io.nwin <= 0)
 		return -ENODEV;
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index c9899e51a26..29c55b0b86b 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -206,6 +206,7 @@ static void elsa_cs_detach(struct pcmcia_device *link)
 
 static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	int j;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 2c611f91cfb..2746acbd8b7 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -218,19 +218,17 @@ static void sedlbauer_detach(struct pcmcia_device *link)
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 struct sedlbauer_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 	win_req_t req;
 };
 
 static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
+				  cistpl_cftable_entry_t *dflt,
 				  void *priv_data)
 {
 	struct sedlbauer_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -243,26 +241,28 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+		if (cfg_mem->conf.Vcc !=
+		    cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
-	} else if (cfg_mem->dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
+	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc !=
+		    dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 	}
 
 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
@@ -291,8 +291,8 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	  needs to be mapped to virtual space with ioremap() before it
 	  is used.
 	*/
-	if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 		memreq_t map;
 		cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
 		cfg_mem->req.Attributes |= WIN_ENABLE;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index ecb75ae8a39..f4f2e2231a9 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -196,6 +196,7 @@ static void teles_detach(struct pcmcia_device *link)
 
 static int teles_cs_configcheck(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cf,
+				cistpl_cftable_entry_t *dflt,
 				void *priv_data)
 {
 	int j;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 04ece0b77d1..c99dc5d54d1 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -286,6 +286,7 @@ static int try_io_port(struct pcmcia_device *link)
 
 static int axnet_configcheck(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cfg,
+			     cistpl_cftable_entry_t *dflt,
 			     void *priv_data)
 {
 	int i;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index a6060872249..10fc537804b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -514,6 +514,7 @@ static int try_io_port(struct pcmcia_device *link)
 
 static int pcnet_confcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cfg,
+			   cistpl_cftable_entry_t *dflt,
 			   void *priv_data)
 {
 	int *has_shmem = priv_data;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 1e595038a49..05bca83c5e2 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -461,6 +461,7 @@ static int mhz_3288_power(struct pcmcia_device *link)
 
 static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cf,
+				cistpl_cftable_entry_t *dflt,
 				void *priv_data)
 {
 	int k;
@@ -651,6 +652,7 @@ static int mot_setup(struct pcmcia_device *link)
 
 static int smc_configcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cf,
+			   cistpl_cftable_entry_t *dflt,
 			   void *priv_data)
 {
 	p_dev->io.BasePort1 = cf->io.win[0].base;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b0de704f229..a16efa49b85 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -718,6 +718,7 @@ has_ce2_string(struct pcmcia_device * p_dev)
 static int
 xirc2ps_config_modem(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
+		     cistpl_cftable_entry_t *dflt,
 		     void *priv_data)
 {
 	unsigned int ioaddr;
@@ -736,6 +737,7 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
 static int
 xirc2ps_config_check(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
+		     cistpl_cftable_entry_t *dflt,
 		     void *priv_data)
 {
 	int *pass = priv_data;
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d7216730f18..657adf85ab7 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,19 +206,12 @@ static void airo_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-struct airo_cs_config_data {
-	cistpl_cftable_entry_t dflt;
-	win_req_t req;
-};
-
 static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
 				void *priv_data)
 {
-	struct airo_cs_config_data *cfg_mem = priv_data;
-
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
+	win_req_t *req = priv_data;
 
 	if (cfg->index == 0)
 		return -ENODEV;
@@ -233,17 +226,17 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
@@ -273,14 +266,14 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	  needs to be mapped to virtual space with ioremap() before it
 	  is used.
 	*/
-	if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 		memreq_t map;
-		cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		cfg_mem->req.Base = mem->win[0].host_addr;
-		cfg_mem->req.Size = mem->win[0].len;
-		cfg_mem->req.AccessSpeed = 0;
-		if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
 			return -ENODEV;
 		map.Page = 0;
 		map.CardOffset = mem->win[0].card_addr;
@@ -295,15 +288,15 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 static int airo_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	struct airo_cs_config_data *cfg_mem;
+	win_req_t *req;
 	int last_fn, last_ret;
 
 	dev = link->priv;
 
 	DEBUG(0, "airo_config(0x%p)\n", link);
 
-	cfg_mem = kzalloc(sizeof(struct airo_cs_config_data), GFP_KERNEL);
-	if (!cfg_mem)
+	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+	if (!req)
 		return -ENOMEM;
 
 	/*
@@ -320,7 +313,7 @@ static int airo_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, airo_cs_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
 	if (last_ret)
 		goto failed;
 
@@ -365,17 +358,17 @@ static int airo_config(struct pcmcia_device *link)
 		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 		       link->io.BasePort2+link->io.NumPorts2-1);
 	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
-		       cfg_mem->req.Base+cfg_mem->req.Size-1);
+		printk(", mem 0x%06lx-0x%06lx", req->Base,
+		       req->Base+req->Size-1);
 	printk("\n");
-	kfree(cfg_mem);
+	kfree(req);
 	return 0;
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
  failed:
 	airo_release(link);
-	kfree(cfg_mem);
+	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 12efd44d64a..c71aae992ec 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -226,14 +226,12 @@ static int card_present(void *arg)
 
 static int atmel_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cfg,
+			      cistpl_cftable_entry_t *dflt,
 			      void *priv_data)
 {
-	cistpl_cftable_entry_t *dflt = priv_data;
-
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		*dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
+
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -278,7 +276,6 @@ static int atmel_config(struct pcmcia_device *link)
 	local_info_t *dev;
 	int last_fn, last_ret;
 	struct pcmcia_device_id *did;
-	cistpl_cftable_entry_t dflt = { 0 };
 
 	dev = link->priv;
 	did = handle_to_dev(link).driver_data;
@@ -297,7 +294,7 @@ static int atmel_config(struct pcmcia_device *link)
 	  these things without consulting the CIS, and most client drivers
 	  will only use the CIS to fill in implementation-defined details.
 	*/
-	if (pcmcia_loop_config(link, atmel_config_check, &dflt))
+	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
 	/*
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2abaa90b799..f9595ca71a0 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -537,23 +537,21 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
  * socket and make the device available to the system */
 
 struct prism2_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int prism2_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	struct prism2_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
 
 	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-	       "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
+	       "(default 0x%02X)\n", cfg->index, dflt->index);
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
@@ -570,8 +568,8 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 			       " this entry\n");
 			return -ENODEV;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
 		    10000 && !ignore_cis_vcc) {
 			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
 			       "- skipping this entry\n");
@@ -581,11 +579,11 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 	else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
 		/* At least Compaq WL200 does not have IRQInfo1 set,
@@ -597,11 +595,11 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	/* IO window settings */
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-	       "cfg_mem->dflt.io.nwin=%d\n",
-	       cfg->io.nwin, cfg_mem->dflt.io.nwin);
+	       "dflt->io.nwin=%d\n",
+	       cfg->io.nwin, dflt->io.nwin);
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
 		       "io.base=0x%04x, len=%d\n", io->flags,
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 67a172dfb2d..8a367f96db3 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -165,18 +165,16 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 	} while (0)
 
 struct orinoco_cs_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
 				   void *priv_data)
 {
 	struct orinoco_cs_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
 
@@ -188,9 +186,9 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -199,17 +197,17 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
-			cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 7536aa91dad..e28878dfaba 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -634,18 +634,16 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  */
 
 struct spectrum_cs_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 				    cistpl_cftable_entry_t *cfg,
+				    cistpl_cftable_entry_t *dflt,
 				    void *priv_data)
 {
 	struct spectrum_cs_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
 
@@ -657,9 +655,9 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -668,17 +666,17 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
-			cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 814c5252d70..05f34e73694 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -151,9 +151,9 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int parport_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
 				void *priv_data)
 {
-	cistpl_cftable_entry_t *dflt = priv_data;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		if (epp_mode)
@@ -166,26 +166,20 @@ static int parport_config_check(struct pcmcia_device *p_dev,
 			p_dev->io.NumPorts2 = io->win[1].len;
 		}
 		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
-			goto next_entry;
+			return -ENODEV;
 		return 0;
 	}
-
-next_entry:
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		*dflt = *cfg;
-	return -ENODEV;
 }
 
 static int parport_config(struct pcmcia_device *link)
 {
     parport_info_t *info = link->priv;
-    cistpl_cftable_entry_t dflt = { 0 };
     struct parport *p;
     int last_ret, last_fn;
 
     DEBUG(0, "parport_config(0x%p)\n", link);
 
-    last_ret = pcmcia_loop_config(link, parport_config_check, &dflt);
+    last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
     if (last_ret) {
 	    cs_error(link, RequestIO, last_ret);
 	    goto failed;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index ba34ac8876f..5ddfd46dea6 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -915,6 +915,7 @@ struct pcmcia_cfg_mem {
 	tuple_t tuple;
 	cisparse_t parse;
 	u8 buf[256];
+	cistpl_cftable_entry_t dflt;
 };
 
 /**
@@ -933,10 +934,12 @@ struct pcmcia_cfg_mem {
 int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
 						 cistpl_cftable_entry_t *cfg,
+						 cistpl_cftable_entry_t *dflt,
 						 void *priv_data),
 		       void *priv_data)
 {
 	struct pcmcia_cfg_mem *cfg_mem;
+
 	tuple_t *tuple;
 	int ret = -ENODEV;
 
@@ -963,8 +966,10 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 
 		/* default values */
 		p_dev->conf.ConfigIndex = cfg->index;
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+			cfg_mem->dflt = *cfg;
 
-		ret = conf_check(p_dev, cfg, priv_data);
+		ret = conf_check(p_dev, cfg, &cfg_mem->dflt, priv_data);
 		if (!ret)
 			break;
 
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 5e4d8e42ba0..2ed3077b826 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -141,8 +141,9 @@ static void aha152x_detach(struct pcmcia_device *link)
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int aha152x_config_check(struct pcmcia_device *p_dev,
-			   cistpl_cftable_entry_t *cfg,
-			   void *priv_data)
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				void *priv_data)
 {
 	/* For New Media T&J, look for a SCSI window */
 	if (cfg->io.win[0].len >= 0x20)
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index e3d6937c920..2b6e92d7be0 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -124,8 +124,9 @@ static void fdomain_detach(struct pcmcia_device *link)
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int fdomain_config_check(struct pcmcia_device *p_dev,
-				  cistpl_cftable_entry_t *cfg,
-				  void *priv_data)
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
 	return pcmcia_request_io(p_dev, &p_dev->io);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index aee24b745dc..aa452346257 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1612,17 +1612,15 @@ struct nsp_cs_configdata {
 	nsp_hw_data		*data;
 	win_req_t		req;
 	config_info_t		conf;
-	cistpl_cftable_entry_t	dflt;
 };
 
 static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	struct nsp_cs_configdata *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t));
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -1637,28 +1635,27 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
 		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
-		else if (cfg_mem->dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
+		else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
 				return -ENODEV;
 		}
 
 		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
 			p_dev->conf.Vpp =
 				cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-		} else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
+		} else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
 			p_dev->conf.Vpp =
-				cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+				dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		}
 
 		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1) {
+		if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 			p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-		}
 
 		/* IO window settings */
 		p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+		if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 			if (!(io->flags & CISTPL_IO_8BIT))
 				p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
@@ -1677,10 +1674,10 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 				goto next_entry;
 		}
 
-		if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
+		if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
 			memreq_t	map;
 			cistpl_mem_t	*mem =
-				(cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+				(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 			cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
 			cfg_mem->req.Attributes |= WIN_ENABLE;
 			cfg_mem->req.Base = mem->win[0].host_addr;
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index a361275b20a..da6b3603198 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -196,8 +196,9 @@ static void qlogic_detach(struct pcmcia_device *link)
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int qlogic_config_check(struct pcmcia_device *p_dev,
-				  cistpl_cftable_entry_t *cfg,
-				  void *priv_data)
+			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
+			       void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
 	p_dev->io.NumPorts1 = cfg->io.win[0].len;
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 23a5219051a..eba193134df 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -702,6 +702,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 static int SYM53C500_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
+				  cistpl_cftable_entry_t *dflt,
 				  void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 69373816001..f8658686439 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -443,6 +443,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	static const int size_table[2] = { 8, 16 };
@@ -465,6 +466,7 @@ static int simple_config_check(struct pcmcia_device *p_dev,
 
 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 					cistpl_cftable_entry_t *cf,
+					cistpl_cftable_entry_t *dflt,
 					void *priv_data)
 {
 	static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
@@ -546,6 +548,7 @@ found_port:
 
 static int multi_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cf,
+			      cistpl_cftable_entry_t *dflt,
 			      void *priv_data)
 {
 	int *base2 = priv_data;
@@ -565,6 +568,7 @@ static int multi_config_check(struct pcmcia_device *p_dev,
 
 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 				       cistpl_cftable_entry_t *cf,
+				       cistpl_cftable_entry_t *dflt,
 				       void *priv_data)
 {
 	int *base2 = priv_data;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index ba2c7a2125a..b41df211b78 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -126,10 +126,9 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
 
 static int ixj_config_check(struct pcmcia_device *p_dev,
 			    cistpl_cftable_entry_t *cfg,
+			    cistpl_cftable_entry_t *dflt,
 			    void *priv_data)
 {
-	cistpl_cftable_entry_t *dflt = priv_data;
-
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.BasePort1 = io->win[0].base;
@@ -138,10 +137,7 @@ static int ixj_config_check(struct pcmcia_device *p_dev,
 			p_dev->io.BasePort2 = io->win[1].base;
 			p_dev->io.NumPorts2 = io->win[1].len;
 		}
-		if (pcmcia_request_io(p_dev, &p_dev->io)) {
-			if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-				*dflt = *cfg;
-		} else
+		if (!pcmcia_request_io(p_dev, &p_dev->io))
 			return 0;
 	}
 	return -ENODEV;
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 5b55c72c710..78cc32e7b01 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -156,19 +156,16 @@ static void sl811_cs_release(struct pcmcia_device * link)
 }
 
 struct sl811_css_cfg {
-	cistpl_cftable_entry_t	dflt;
 	config_info_t		conf;
 };
 
 static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 				 cistpl_cftable_entry_t *cfg,
+				 cistpl_cftable_entry_t *dflt,
 				 void *priv_data)
 {
 	struct sl811_css_cfg	*cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t));
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -178,8 +175,8 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 		if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 !=
 		    cfg_mem->conf.Vcc)
 			return -ENODEV;
-	} else if (cfg_mem->dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM]/10000
+	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+		if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000
 		    != cfg_mem->conf.Vcc)
 			return -ENODEV;
 		}
@@ -187,18 +184,18 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
-			cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+			dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
 	/* we need an interrupt */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index b2eb914a18d..0aa702705d0 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -616,6 +616,7 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
 int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
 						 cistpl_cftable_entry_t *cf,
+						 cistpl_cftable_entry_t *dflt,
 						 void *priv_data),
 		       void *priv_data);
 
-- 
cgit v1.2.3-70-g09d2


From ad913c11928f51abb6174f165db8d8d205b22e21 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 2 Aug 2008 16:12:00 +0200
Subject: pcmcia: pcmcia_config_loop() improvement by passing vcc

By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/ata/pata_pcmcia.c               | 12 ++++------
 drivers/bluetooth/bt3c_cs.c             |  2 ++
 drivers/bluetooth/btuart_cs.c           | 11 +++++----
 drivers/bluetooth/dtl1_cs.c             |  1 +
 drivers/char/pcmcia/cm4000_cs.c         |  1 +
 drivers/char/pcmcia/cm4040_cs.c         |  1 +
 drivers/ide/legacy/ide-cs.c             | 12 ++++------
 drivers/isdn/hardware/avm/avm_cs.c      |  1 +
 drivers/isdn/hisax/avma1_cs.c           |  1 +
 drivers/isdn/hisax/elsa_cs.c            |  1 +
 drivers/isdn/hisax/sedlbauer_cs.c       | 42 +++++++++++++--------------------
 drivers/isdn/hisax/teles_cs.c           |  1 +
 drivers/net/pcmcia/axnet_cs.c           |  1 +
 drivers/net/pcmcia/pcnet_cs.c           |  1 +
 drivers/net/pcmcia/smc91c92_cs.c        |  2 ++
 drivers/net/pcmcia/xirc2ps_cs.c         |  2 ++
 drivers/net/wireless/airo_cs.c          |  1 +
 drivers/net/wireless/atmel_cs.c         |  1 +
 drivers/net/wireless/hostap/hostap_cs.c | 23 ++++--------------
 drivers/net/wireless/orinoco_cs.c       | 28 +++++-----------------
 drivers/net/wireless/spectrum_cs.c      | 28 +++++-----------------
 drivers/parport/parport_cs.c            |  2 ++
 drivers/pcmcia/pcmcia_resource.c        |  7 +++++-
 drivers/scsi/pcmcia/aha152x_stub.c      |  1 +
 drivers/scsi/pcmcia/fdomain_stub.c      |  1 +
 drivers/scsi/pcmcia/nsp_cs.c            |  8 +++----
 drivers/scsi/pcmcia/qlogic_stub.c       |  1 +
 drivers/scsi/pcmcia/sym53c500_cs.c      |  1 +
 drivers/serial/serial_cs.c              |  4 ++++
 drivers/telephony/ixj_pcmcia.c          |  1 +
 drivers/usb/host/sl811_cs.c             | 35 +++++++--------------------
 include/pcmcia/cistpl.h                 |  1 +
 32 files changed, 93 insertions(+), 142 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 20982065a49..6e4d31d8d14 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -150,7 +150,6 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 
 struct pcmcia_config_check {
-	config_info_t conf;
 	unsigned long ctl_base;
 	int skip_vcc;
 	int is_kme;
@@ -159,6 +158,7 @@ struct pcmcia_config_check {
 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
 				   void *priv_data)
 {
 	struct pcmcia_config_check *stk = priv_data;
@@ -166,12 +166,10 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 	/* Check for matching Vcc, unless we're desperate */
 	if (!stk->skip_vcc) {
 		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc !=
-			    cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
 				return -ENODEV;
 		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc !=
-			    dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
 				return -ENODEV;
 		}
 	}
@@ -257,10 +255,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	if (!stk)
 		goto out1;
 	stk->is_kme = is_kme;
-
-	/* Not sure if this is right... look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
 	stk->skip_vcc = io_base = ctl_base = 0;
+
 	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
 		stk->skip_vcc = 1;
 		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 794a5ef9ea2..3fd8022a635 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -681,6 +681,7 @@ static void bt3c_detach(struct pcmcia_device *link)
 static int bt3c_check_config(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cf,
 			     cistpl_cftable_entry_t *dflt,
+			     unsigned int vcc,
 			     void *priv_data)
 {
 	unsigned long try = (unsigned long) priv_data;
@@ -701,6 +702,7 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
 static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 				      cistpl_cftable_entry_t *cf,
 				      cistpl_cftable_entry_t *dflt,
+				      unsigned int vcc,
 				      void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 32017f96067..17183125434 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -610,16 +610,17 @@ static void btuart_detach(struct pcmcia_device *link)
 static int btuart_check_config(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
-	unsigned long try = (unsigned long) priv_data;
+	int *try = priv_data;
 
 	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 	    (cf->io.win[0].base != 0)) {
 		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.IOAddrLines = (try == 0) ? 16 :
+		p_dev->io.IOAddrLines = (*try == 0) ? 16 :
 			cf->io.flags & CISTPL_IO_LINES_MASK;
 		if (!pcmcia_request_io(p_dev, &p_dev->io))
 			return 0;
@@ -630,6 +631,7 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
 static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 					cistpl_cftable_entry_t *cf,
 					cistpl_cftable_entry_t *dflt,
+					unsigned int vcc,
 					void *priv_data)
 {
 	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
@@ -650,13 +652,12 @@ static int btuart_config(struct pcmcia_device *link)
 {
 	btuart_info_t *info = link->priv;
 	int i;
-	unsigned long try;
+	int try;
 
 	/* First pass: look for a config entry that looks normal.
 	   Two tries: without IO aliases, then with aliases */
 	for (try = 0; try < 2; try++)
-		if (!pcmcia_loop_config(link, btuart_check_config,
-					(void *) try))
+		if (!pcmcia_loop_config(link, btuart_check_config, &try))
 			goto found_port;
 
 	/* Second pass: try to find an entry that isn't picky about
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 1830ebd6ca7..ec12560e034 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -593,6 +593,7 @@ static void dtl1_detach(struct pcmcia_device *link)
 static int dtl1_confcheck(struct pcmcia_device *p_dev,
 			  cistpl_cftable_entry_t *cf,
 			  cistpl_cftable_entry_t *dflt,
+			  unsigned int vcc,
 			  void *priv_data)
 {
 	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 7785fbb4c0f..1c5bf99895e 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1762,6 +1762,7 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
 static int cm4000_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	if (!cfg->io.nwin)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 468ddef916b..e047bac56f0 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -529,6 +529,7 @@ static void cm4040_reader_release(struct pcmcia_device *link)
 static int cm4040_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	int rc;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index cc8eeaf8027..6472cd8231f 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -221,7 +221,6 @@ out_release:
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
 struct pcmcia_config_check {
-	config_info_t conf;
 	unsigned long ctl_base;
 	int skip_vcc;
 	int is_kme;
@@ -230,6 +229,7 @@ struct pcmcia_config_check {
 static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
 				   void *priv_data)
 {
 	struct pcmcia_config_check *stk = priv_data;
@@ -237,12 +237,10 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 	/* Check for matching Vcc, unless we're desperate */
 	if (!stk->skip_vcc) {
 		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc !=
-			    cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
 				return -ENODEV;
 		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (stk->conf.Vcc !=
-			    dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
 				return -ENODEV;
 		}
 	}
@@ -298,10 +296,8 @@ static int ide_config(struct pcmcia_device *link)
     if (!stk)
 	    goto err_mem;
     stk->is_kme = is_kme;
-
-    /* Not sure if this is right... look up the current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
     stk->skip_vcc = io_base = ctl_base = 0;
+
     if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
 	    stk->skip_vcc = 1;
 	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index a8d6949338c..38804653970 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -157,6 +157,7 @@ static void avmcs_detach(struct pcmcia_device *link)
 static int avmcs_configcheck(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cf,
 			     cistpl_cftable_entry_t *dflt,
+			     unsigned int vcc,
 			     void *priv_data)
 {
 	if (cf->io.nwin <= 0)
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 7ce1aabb0ae..8fd3ca0fb93 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -177,6 +177,7 @@ static void avma1cs_detach(struct pcmcia_device *link)
 static int avma1cs_configcheck(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	if (cf->io.nwin <= 0)
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 29c55b0b86b..2bf0016dea5 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -207,6 +207,7 @@ static void elsa_cs_detach(struct pcmcia_device *link)
 static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	int j;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 2746acbd8b7..9a3c9f5e4fe 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -217,17 +217,13 @@ static void sedlbauer_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-struct sedlbauer_config_data {
-	config_info_t conf;
-	win_req_t req;
-};
-
 static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
 				  void *priv_data)
 {
-	struct sedlbauer_config_data *cfg_mem = priv_data;
+	win_req_t *req = priv_data;
 
 	if (cfg->index == 0)
 		return -ENODEV;
@@ -241,12 +237,10 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc !=
-		    cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc !=
-		    dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 	}
 
@@ -294,12 +288,12 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
 		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 		memreq_t map;
-		cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		cfg_mem->req.Attributes |= WIN_ENABLE;
-		cfg_mem->req.Base = mem->win[0].host_addr;
-		cfg_mem->req.Size = mem->win[0].len;
-		cfg_mem->req.AccessSpeed = 0;
-		if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+		req->Attributes |= WIN_ENABLE;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
 			return -ENODEV;
 		map.Page = 0;
 		map.CardOffset = mem->win[0].card_addr;
@@ -314,20 +308,16 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 static int sedlbauer_config(struct pcmcia_device *link)
 {
     local_info_t *dev = link->priv;
-    struct sedlbauer_config_data *cfg_mem;
+    win_req_t *req;
     int last_fn, last_ret;
     IsdnCard_t  icard;
 
     DEBUG(0, "sedlbauer_config(0x%p)\n", link);
 
-    cfg_mem = kzalloc(sizeof(struct sedlbauer_config_data), GFP_KERNEL);
-    if (!cfg_mem)
+    req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+    if (!req)
 	    return -ENOMEM;
 
-    /* Look up the current Vcc */
-    CS_CHECK(GetConfigurationInfo,
-	     pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
@@ -340,7 +330,7 @@ static int sedlbauer_config(struct pcmcia_device *link)
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
-    last_ret = pcmcia_loop_config(link, sedlbauer_config_check, cfg_mem);
+    last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
     if (last_ret)
 	    goto failed;
 
@@ -381,8 +371,8 @@ static int sedlbauer_config(struct pcmcia_device *link)
 	printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 	       link->io.BasePort2+link->io.NumPorts2-1);
     if (link->win)
-	printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
-	       cfg_mem->req.Base+cfg_mem->req.Size-1);
+	printk(", mem 0x%06lx-0x%06lx", req->Base,
+	       req->Base+req->Size-1);
     printk("\n");
 
     icard.para[0] = link->irq.AssignedIRQ;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index f4f2e2231a9..21cabd0aadb 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -197,6 +197,7 @@ static void teles_detach(struct pcmcia_device *link)
 static int teles_cs_configcheck(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cf,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	int j;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index c99dc5d54d1..061d889794c 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -287,6 +287,7 @@ static int try_io_port(struct pcmcia_device *link)
 static int axnet_configcheck(struct pcmcia_device *p_dev,
 			     cistpl_cftable_entry_t *cfg,
 			     cistpl_cftable_entry_t *dflt,
+			     unsigned int vcc,
 			     void *priv_data)
 {
 	int i;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 10fc537804b..aa17434faa0 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -515,6 +515,7 @@ static int try_io_port(struct pcmcia_device *link)
 static int pcnet_confcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cfg,
 			   cistpl_cftable_entry_t *dflt,
+			   unsigned int vcc,
 			   void *priv_data)
 {
 	int *has_shmem = priv_data;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 05bca83c5e2..b3f2085ddca 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -462,6 +462,7 @@ static int mhz_3288_power(struct pcmcia_device *link)
 static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cf,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	int k;
@@ -653,6 +654,7 @@ static int mot_setup(struct pcmcia_device *link)
 static int smc_configcheck(struct pcmcia_device *p_dev,
 			   cistpl_cftable_entry_t *cf,
 			   cistpl_cftable_entry_t *dflt,
+			   unsigned int vcc,
 			   void *priv_data)
 {
 	p_dev->io.BasePort1 = cf->io.win[0].base;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index a16efa49b85..d97e6e917c3 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -719,6 +719,7 @@ static int
 xirc2ps_config_modem(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
 		     cistpl_cftable_entry_t *dflt,
+		     unsigned int vcc,
 		     void *priv_data)
 {
 	unsigned int ioaddr;
@@ -738,6 +739,7 @@ static int
 xirc2ps_config_check(struct pcmcia_device *p_dev,
 		     cistpl_cftable_entry_t *cf,
 		     cistpl_cftable_entry_t *dflt,
+		     unsigned int vcc,
 		     void *priv_data)
 {
 	int *pass = priv_data;
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 657adf85ab7..fac1526e49a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -209,6 +209,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	win_req_t *req = priv_data;
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c71aae992ec..4830d51900a 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -227,6 +227,7 @@ static int card_present(void *arg)
 static int atmel_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cfg,
 			      cistpl_cftable_entry_t *dflt,
+			      unsigned int vcc,
 			      void *priv_data)
 {
 	if (cfg->index == 0)
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index f9595ca71a0..c768d42d517 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -536,17 +536,12 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 /* run after a CARD_INSERTION event is received to configure the PCMCIA
  * socket and make the device available to the system */
 
-struct prism2_config_data {
-	config_info_t conf;
-};
-
 static int prism2_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
-	struct prism2_config_data *cfg_mem = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -562,14 +557,14 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
 		    10000 && !ignore_cis_vcc) {
 			PDEBUG(DEBUG_EXTRA, "  Vcc mismatch - skipping"
 			       " this entry\n");
 			return -ENODEV;
 		}
 	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
 		    10000 && !ignore_cis_vcc) {
 			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
 			       "- skipping this entry\n");
@@ -627,7 +622,6 @@ static int prism2_config(struct pcmcia_device *link)
 {
 	struct net_device *dev;
 	struct hostap_interface *iface;
-	struct prism2_config_data *cfg_mem;
 	local_info_t *local;
 	int ret = 1;
 	int last_fn, last_ret;
@@ -635,21 +629,14 @@ static int prism2_config(struct pcmcia_device *link)
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
 
-	cfg_mem = kzalloc(sizeof(struct prism2_config_data), GFP_KERNEL);
-	if (!cfg_mem)
-		return -ENOMEM;
-
 	hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
 	if (hw_priv == NULL) {
 		ret = -ENOMEM;
 		goto failed;
 	}
 
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
 	/* Look for an appropriate configuration table entry in the CIS */
-	last_ret = pcmcia_loop_config(link, prism2_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
 	if (last_ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR "GetNextTuple(): No matching "
@@ -724,7 +711,6 @@ static int prism2_config(struct pcmcia_device *link)
 		if (ret == 0 && local->ddev)
 			strcpy(hw_priv->node.dev_name, local->ddev->name);
 	}
-	kfree(cfg_mem);
 	return ret;
 
  cs_failed:
@@ -732,7 +718,6 @@ static int prism2_config(struct pcmcia_device *link)
 
  failed:
 	kfree(hw_priv);
-	kfree(cfg_mem);
 	prism2_release((u_long)link);
 	return ret;
 }
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 8a367f96db3..c7b57d9d499 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -164,31 +164,26 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 	} while (0)
 
-struct orinoco_cs_config_data {
-	config_info_t conf;
-};
-
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
+				   unsigned int vcc,
 				   void *priv_data)
 {
-	struct orinoco_cs_config_data *cfg_mem = priv_data;
-
 	if (cfg->index == 0)
 		goto next_entry;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
 	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -236,7 +231,6 @@ next_entry:
 static int
 orinoco_cs_config(struct pcmcia_device *link)
 {
-	struct orinoco_cs_config_data *cfg_mem;
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
@@ -244,14 +238,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 	int last_fn, last_ret;
 	void __iomem *mem;
 
-	cfg_mem = kzalloc(sizeof(struct orinoco_cs_config_data), GFP_KERNEL);
-	if (!cfg_mem)
-		return -ENOMEM;
-
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -266,7 +252,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 	if (last_ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
@@ -324,7 +310,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
 	       link->irq.AssignedIRQ, link->io.BasePort1,
 	       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	kfree(cfg_mem);
 	return 0;
 
  cs_failed:
@@ -332,7 +317,6 @@ orinoco_cs_config(struct pcmcia_device *link)
 
  failed:
 	orinoco_cs_release(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }				/* orinoco_cs_config */
 
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index e28878dfaba..d7e9d9c3042 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -633,31 +633,26 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  * device available to the system.
  */
 
-struct spectrum_cs_config_data {
-	config_info_t conf;
-};
-
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 				    cistpl_cftable_entry_t *cfg,
 				    cistpl_cftable_entry_t *dflt,
+				    unsigned int vcc,
 				    void *priv_data)
 {
-	struct spectrum_cs_config_data *cfg_mem = priv_data;
-
 	if (cfg->index == 0)
 		goto next_entry;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
 	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -705,7 +700,6 @@ next_entry:
 static int
 spectrum_cs_config(struct pcmcia_device *link)
 {
-	struct spectrum_cs_config_data *cfg_mem;
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
@@ -713,14 +707,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	int last_fn, last_ret;
 	void __iomem *mem;
 
-	cfg_mem = kzalloc(sizeof(struct spectrum_cs_config_data), GFP_KERNEL);
-	if (!cfg_mem)
-		return -ENOMEM;
-
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -735,7 +721,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
 	if (last_ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
@@ -799,7 +785,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 	       link->irq.AssignedIRQ, link->io.BasePort1,
 	       link->io.BasePort1 + link->io.NumPorts1 - 1);
 
-	kfree(cfg_mem);
 	return 0;
 
  cs_failed:
@@ -807,7 +792,6 @@ spectrum_cs_config(struct pcmcia_device *link)
 
  failed:
 	spectrum_cs_release(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }				/* spectrum_cs_config */
 
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 05f34e73694..b1899e9c1f6 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -152,6 +152,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int parport_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
@@ -169,6 +170,7 @@ static int parport_config_check(struct pcmcia_device *p_dev,
 			return -ENODEV;
 		return 0;
 	}
+	return -ENODEV;
 }
 
 static int parport_config(struct pcmcia_device *link)
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 5ddfd46dea6..0cf3ef30625 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -935,6 +935,7 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
 						 cistpl_cftable_entry_t *cfg,
 						 cistpl_cftable_entry_t *dflt,
+						 unsigned int vcc,
 						 void *priv_data),
 		       void *priv_data)
 {
@@ -942,11 +943,15 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 
 	tuple_t *tuple;
 	int ret = -ENODEV;
+	unsigned int vcc;
 
 	cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL);
 	if (cfg_mem == NULL)
 		return -ENOMEM;
 
+	/* get the current Vcc setting */
+	vcc = p_dev->socket->socket.Vcc;
+
 	tuple = &cfg_mem->tuple;
 	tuple->TupleData = cfg_mem->buf;
 	tuple->TupleDataMax = 255;
@@ -969,7 +974,7 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
 			cfg_mem->dflt = *cfg;
 
-		ret = conf_check(p_dev, cfg, &cfg_mem->dflt, priv_data);
+		ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data);
 		if (!ret)
 			break;
 
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 2ed3077b826..165ff884f48 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -143,6 +143,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int aha152x_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	/* For New Media T&J, look for a SCSI window */
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 2b6e92d7be0..06254f46a0d 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -126,6 +126,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int fdomain_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
 				void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index aa452346257..7c19bf26487 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1611,12 +1611,12 @@ static void nsp_cs_detach(struct pcmcia_device *link)
 struct nsp_cs_configdata {
 	nsp_hw_data		*data;
 	win_req_t		req;
-	config_info_t		conf;
 };
 
 static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	struct nsp_cs_configdata *cfg_mem = priv_data;
@@ -1633,10 +1633,10 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
+		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 			return -ENODEV;
 		else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-			if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
+			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000)
 				return -ENODEV;
 		}
 
@@ -1719,8 +1719,6 @@ static int nsp_cs_config(struct pcmcia_device *link)
 		return -ENOMEM;
 	cfg_mem->data = data;
 
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &cfg_mem->conf));
 	ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem);
 		goto cs_failed;
 
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index da6b3603198..20c3e5e6d88 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -198,6 +198,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int qlogic_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index eba193134df..b330c11a175 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -703,6 +703,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 static int SYM53C500_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
 				  void *priv_data)
 {
 	p_dev->io.BasePort1 = cfg->io.win[0].base;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index f8658686439..7e00e672bfe 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -444,6 +444,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
+			       unsigned int vcc,
 			       void *priv_data)
 {
 	static const int size_table[2] = { 8, 16 };
@@ -467,6 +468,7 @@ static int simple_config_check(struct pcmcia_device *p_dev,
 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 					cistpl_cftable_entry_t *cf,
 					cistpl_cftable_entry_t *dflt,
+					unsigned int vcc,
 					void *priv_data)
 {
 	static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
@@ -549,6 +551,7 @@ found_port:
 static int multi_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cf,
 			      cistpl_cftable_entry_t *dflt,
+			      unsigned int vcc,
 			      void *priv_data)
 {
 	int *base2 = priv_data;
@@ -569,6 +572,7 @@ static int multi_config_check(struct pcmcia_device *p_dev,
 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 				       cistpl_cftable_entry_t *cf,
 				       cistpl_cftable_entry_t *dflt,
+				       unsigned int vcc,
 				       void *priv_data)
 {
 	int *base2 = priv_data;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index b41df211b78..347c3ed1d9f 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -127,6 +127,7 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
 static int ixj_config_check(struct pcmcia_device *p_dev,
 			    cistpl_cftable_entry_t *cfg,
 			    cistpl_cftable_entry_t *dflt,
+			    unsigned int vcc,
 			    void *priv_data)
 {
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 78cc32e7b01..ca733b7caea 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -155,29 +155,22 @@ static void sl811_cs_release(struct pcmcia_device * link)
 	platform_device_unregister(&platform_dev);
 }
 
-struct sl811_css_cfg {
-	config_info_t		conf;
-};
-
 static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 				 cistpl_cftable_entry_t *cfg,
 				 cistpl_cftable_entry_t *dflt,
+				 unsigned int vcc,
 				 void *priv_data)
 {
-	struct sl811_css_cfg	*cfg_mem = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 !=
-		    cfg_mem->conf.Vcc)
+		if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
 			return -ENODEV;
 	} else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
-		if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000
-		    != cfg_mem->conf.Vcc)
+		if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
 			return -ENODEV;
 		}
 
@@ -214,29 +207,20 @@ static int sl811_cs_config(struct pcmcia_device *link)
 	struct device		*parent = &handle_to_dev(link);
 	local_info_t		*dev = link->priv;
 	int			last_fn, last_ret;
-	struct sl811_css_cfg	*cfg_mem;
 
 	DBG(0, "sl811_cs_config(0x%p)\n", link);
 
-	cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL);
-	if (!cfg_mem)
-		return -ENOMEM;
-
-	/* Look up the current Vcc */
-	CS_CHECK(GetConfigurationInfo,
-			pcmcia_get_configuration_info(link, &cfg_mem->conf));
-
-	if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem))
-		return -ENODEV;
+	if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+		goto failed;
 
 	/* require an IRQ and two registers */
 	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
-		goto cs_failed;
+		goto failed;
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		CS_CHECK(RequestIRQ,
 			pcmcia_request_irq(link, &link->irq));
 	else
-		goto cs_failed;
+		goto failed;
 
 	CS_CHECK(RequestConfiguration,
 		pcmcia_request_configuration(link, &link->conf));
@@ -257,13 +241,12 @@ static int sl811_cs_config(struct pcmcia_device *link)
 	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
 			< 0) {
 cs_failed:
-		printk("sl811_cs_config failed\n");
 		cs_error(link, last_fn, last_ret);
+failed:
+		printk(KERN_WARNING "sl811_cs_config failed\n");
 		sl811_cs_release(link);
-		kfree(cfg_mem);
 		return  -ENODEV;
 	}
-	kfree(cfg_mem);
 	return 0;
 }
 
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index 0aa702705d0..0092910a597 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -617,6 +617,7 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
 						 cistpl_cftable_entry_t *cf,
 						 cistpl_cftable_entry_t *dflt,
+						 unsigned int vcc,
 						 void *priv_data),
 		       void *priv_data);
 
-- 
cgit v1.2.3-70-g09d2


From ef313e36d8896a42fc567a83a5d4b86821634e8d Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 2 Aug 2008 16:25:26 +0200
Subject: pcmcia: remove remaining in-kernel pcmcia_get_configuration_info()
 users

Remove the three remaining pcmcia_get_configuration_info() users:
- pcmciamtd is marked broken anyway.
- serial_cs.c can access the relevant structs directly
- ipwireless didn't use the output

CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/char/pcmcia/ipwireless/main.c | 10 ----------
 drivers/mtd/maps/pcmciamtd.c          | 12 +-----------
 drivers/serial/serial_cs.c            | 18 +++++++++---------
 3 files changed, 10 insertions(+), 30 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 5eca7a99afe..1f520e544d4 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -83,7 +83,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 {
 	struct pcmcia_device *link = ipw->link;
 	int ret;
-	config_info_t conf;
 	tuple_t tuple;
 	unsigned short buf[64];
 	cisparse_t parse;
@@ -297,15 +296,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit3;
 	}
 
-	/* Look up current Vcc */
-
-	ret = pcmcia_get_configuration_info(link, &conf);
-
-	if (ret != CS_SUCCESS) {
-		cs_error(link, GetConfigurationInfo, ret);
-		goto exit4;
-	}
-
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
 			ipw->is_v2_card ? "V2/V3" : "V1");
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 90924fb0048..8861ca477dd 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -493,7 +493,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	int last_ret = 0, last_fn = 0;
 	int ret;
 	int i;
-	config_info_t t;
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
 	int new_name = 0;
 
@@ -571,10 +570,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	dev->pcmcia_map.map_priv_1 = (unsigned long)dev;
 	dev->pcmcia_map.map_priv_2 = (unsigned long)link->win;
 
-	DEBUG(2, "Getting configuration");
-	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &t));
-	DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
-	dev->vpp = (vpp) ? vpp : t.Vpp1;
+	dev->vpp = (vpp) ? vpp : link->socket.socket.Vpp;
 	link->conf.Attributes = 0;
 	if(setvpp == 2) {
 		link->conf.Vpp = dev->vpp;
@@ -583,13 +579,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	}
 
 	link->conf.IntType = INT_MEMORY;
-	link->conf.ConfigBase = t.ConfigBase;
-	link->conf.Status = t.Status;
-	link->conf.Pin = t.Pin;
-	link->conf.Copy = t.Copy;
-	link->conf.ExtStatus = t.ExtStatus;
 	link->conf.ConfigIndex = 0;
-	link->conf.Present = t.Present;
 	DEBUG(2, "Setting Configuration");
 	ret = pcmcia_request_configuration(link, &link->conf);
 	if(ret != CS_SUCCESS) {
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7e00e672bfe..344e570fbb6 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -488,23 +488,23 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 static int simple_config(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
-	config_info_t config;
-	int i, try;
+	int i = -ENODEV, try;
 
 	/* If the card is already configured, look up the port and irq */
-	i = pcmcia_get_configuration_info(link, &config);
-	if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+	if (link->function_config) {
 		unsigned int port = 0;
-		if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
-			port = config.BasePort2;
+		if ((link->io.BasePort2 != 0) &&
+		    (link->io.NumPorts2 == 8)) {
+			port = link->io.BasePort2;
 			info->slave = 1;
 		} else if ((info->manfid == MANFID_OSITECH) &&
-			   (config.NumPorts1 == 0x40)) {
-			port = config.BasePort1 + 0x28;
+			   (link->io.NumPorts1 == 0x40)) {
+			port = link->io.BasePort1 + 0x28;
 			info->slave = 1;
 		}
 		if (info->slave) {
-			return setup_serial(link, info, port, config.AssignedIRQ);
+			return setup_serial(link, info, port,
+					    link->irq.AssignedIRQ);
 		}
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 4c89e88bfde6a3c179790e21004f24e09a058290 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 3 Aug 2008 10:07:45 +0200
Subject: pcmcia: deprecate CS_SUCCESS

Instead of using own error or success codes, the PCMCIA code should rely on
the generic return values. Therefore, replace all occurrences of CS_SUCCESS
with 0.

CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/bluetooth/bluecard_cs.c         |  8 ++--
 drivers/bluetooth/bt3c_cs.c             |  4 +-
 drivers/bluetooth/btuart_cs.c           |  4 +-
 drivers/bluetooth/dtl1_cs.c             |  4 +-
 drivers/char/pcmcia/cm4040_cs.c         |  4 +-
 drivers/char/pcmcia/ipwireless/main.c   | 36 ++++++++--------
 drivers/isdn/hardware/avm/avm_cs.c      |  4 +-
 drivers/isdn/hisax/avma1_cs.c           |  4 +-
 drivers/isdn/hisax/elsa_cs.c            |  6 +--
 drivers/isdn/hisax/teles_cs.c           |  6 +--
 drivers/mtd/maps/pcmciamtd.c            | 17 ++++----
 drivers/net/pcmcia/3c574_cs.c           |  7 ++--
 drivers/net/pcmcia/3c589_cs.c           |  7 ++--
 drivers/net/pcmcia/axnet_cs.c           |  7 ++--
 drivers/net/pcmcia/com20020_cs.c        |  8 ++--
 drivers/net/pcmcia/fmvj18x_cs.c         | 19 +++++----
 drivers/net/pcmcia/ibmtr_cs.c           |  2 +-
 drivers/net/pcmcia/pcnet_cs.c           |  7 ++--
 drivers/net/pcmcia/smc91c92_cs.c        | 45 +++++++++++---------
 drivers/net/wireless/b43/pcmcia.c       | 14 +++----
 drivers/net/wireless/hostap/hostap_cs.c | 22 +++++-----
 drivers/net/wireless/netwave_cs.c       |  5 ++-
 drivers/net/wireless/ray_cs.c           |  4 +-
 drivers/net/wireless/wavelan_cs.c       | 16 ++++----
 drivers/net/wireless/wl3501_cs.c        |  4 +-
 drivers/pcmcia/cardbus.c                |  2 +-
 drivers/pcmcia/cistpl.c                 | 73 +++++++++++++++++----------------
 drivers/pcmcia/cs.c                     | 14 +++----
 drivers/pcmcia/ds.c                     |  2 +-
 drivers/pcmcia/ds_internal.h            | 10 ++++-
 drivers/pcmcia/pcmcia_ioctl.c           | 14 +++----
 drivers/pcmcia/pcmcia_resource.c        | 26 ++++++------
 drivers/pcmcia/rsrc_nonstatic.c         |  4 +-
 drivers/serial/serial_cs.c              | 16 ++++----
 drivers/ssb/pcmcia.c                    | 20 ++++-----
 35 files changed, 233 insertions(+), 212 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index bcf57927b7a..e6ee21d99d9 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -901,23 +901,23 @@ static int bluecard_config(struct pcmcia_device *link)
 	for (n = 0; n < 0x400; n += 0x40) {
 		link->io.BasePort1 = n ^ 0x300;
 		i = pcmcia_request_io(link, &link->io);
-		if (i == CS_SUCCESS)
+		if (i == 0)
 			break;
 	}
 
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIO, i);
 		goto failed;
 	}
 
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		goto failed;
 	}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 3fd8022a635..156edfd7e10 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -743,13 +743,13 @@ static int bt3c_config(struct pcmcia_device *link)
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		goto failed;
 	}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 17183125434..8e556b7ff9f 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -672,13 +672,13 @@ static int btuart_config(struct pcmcia_device *link)
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		goto failed;
 	}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index ec12560e034..e6e6b037695 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -617,13 +617,13 @@ static int dtl1_config(struct pcmcia_device *link)
 		goto failed;
 
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		goto failed;
 	}
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index e047bac56f0..2d7c906435b 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -567,8 +567,8 @@ static int reader_config(struct pcmcia_device *link, int devno)
 
 	link->conf.IntType = 00000002;
 
-	if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
-								!=CS_SUCCESS) {
+	fail_rc = pcmcia_request_configuration(link, &link->conf);
+	if (fail_rc != 0) {
 		dev_printk(KERN_INFO, &handle_to_dev(link),
 			   "pcmcia_request_configuration failed 0x%x\n",
 			   fail_rc);
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 1f520e544d4..24ffe0324e5 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -67,7 +67,7 @@ static void signalled_reboot_work(struct work_struct *work_reboot)
 	struct pcmcia_device *link = ipw->link;
 	int ret = pccard_reset_card(link->socket);
 
-	if (ret != CS_SUCCESS)
+	if (ret != 0)
 		cs_error(link, ResetCard, ret);
 }
 
@@ -104,7 +104,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	while (ret == 0) {
 		ret = pcmcia_get_tuple_data(link, &tuple);
 
-		if (ret != CS_SUCCESS) {
+		if (ret != 0) {
 			cs_error(link, GetTupleData, ret);
 			goto exit0;
 		}
@@ -115,21 +115,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	ret = pcmcia_get_first_tuple(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetFirstTuple, ret);
 		goto exit0;
 	}
 
 	ret = pcmcia_get_tuple_data(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetTupleData, ret);
 		goto exit0;
 	}
 
 	ret = pcmcia_parse_tuple(link, &tuple, &parse);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, ParseTuple, ret);
 		goto exit0;
 	}
@@ -151,21 +151,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	ret = pcmcia_get_first_tuple(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetFirstTuple, ret);
 		goto exit0;
 	}
 
 	ret = pcmcia_get_tuple_data(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetTupleData, ret);
 		goto exit0;
 	}
 
 	ret = pcmcia_parse_tuple(link, &tuple, &parse);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetTupleData, ret);
 		goto exit0;
 	}
@@ -180,7 +180,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	ret = pcmcia_request_io(link, &link->io);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, RequestIO, ret);
 		goto exit0;
 	}
@@ -194,21 +194,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	ret = pcmcia_get_first_tuple(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetFirstTuple, ret);
 		goto exit1;
 	}
 
 	ret = pcmcia_get_tuple_data(link, &tuple);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, GetTupleData, ret);
 		goto exit1;
 	}
 
 	ret = pcmcia_parse_tuple(link, &tuple, &parse);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, ParseTuple, ret);
 		goto exit1;
 	}
@@ -226,7 +226,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		ret = pcmcia_request_window(&link, &ipw->request_common_memory,
 				&ipw->handle_common_memory);
 
-		if (ret != CS_SUCCESS) {
+		if (ret != 0) {
 			cs_error(link, RequestWindow, ret);
 			goto exit1;
 		}
@@ -238,7 +238,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		ret = pcmcia_map_mem_page(ipw->handle_common_memory,
 				&memreq_common_memory);
 
-		if (ret != CS_SUCCESS) {
+		if (ret != 0) {
 			cs_error(link, MapMemPage, ret);
 			goto exit1;
 		}
@@ -260,7 +260,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
 				&ipw->handle_attr_memory);
 
-		if (ret != CS_SUCCESS) {
+		if (ret != 0) {
 			cs_error(link, RequestWindow, ret);
 			goto exit2;
 		}
@@ -271,7 +271,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		ret = pcmcia_map_mem_page(ipw->handle_attr_memory,
 				&memreq_attr_memory);
 
-		if (ret != CS_SUCCESS) {
+		if (ret != 0) {
 			cs_error(link, MapMemPage, ret);
 			goto exit2;
 		}
@@ -291,7 +291,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	ret = pcmcia_request_irq(link, &link->irq);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, RequestIRQ, ret);
 		goto exit3;
 	}
@@ -331,7 +331,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	 */
 	ret = pcmcia_request_configuration(link, &link->conf);
 
-	if (ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, RequestConfiguration, ret);
 		goto exit4;
 	}
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 38804653970..c72565520e4 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -197,7 +197,7 @@ static int avmcs_config(struct pcmcia_device *link)
 	 * allocate an interrupt line
 	 */
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 	    cs_error(link, RequestIRQ, i);
 	    /* undo */
 	    pcmcia_disable_device(link);
@@ -208,7 +208,7 @@ static int avmcs_config(struct pcmcia_device *link)
          * configure the PCMCIA socket
 	  */
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 	    cs_error(link, RequestConfiguration, i);
 	    pcmcia_disable_device(link);
 	    break;
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8fd3ca0fb93..23560c897ec 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -217,7 +217,7 @@ static int avma1cs_config(struct pcmcia_device *link)
 	 * allocate an interrupt line
 	 */
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 	    cs_error(link, RequestIRQ, i);
 	    /* undo */
 	    pcmcia_disable_device(link);
@@ -228,7 +228,7 @@ static int avma1cs_config(struct pcmcia_device *link)
 	 * configure the PCMCIA socket
 	 */
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 	    cs_error(link, RequestConfiguration, i);
 	    pcmcia_disable_device(link);
 	    break;
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 2bf0016dea5..f4d0fe29bcf 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -238,20 +238,20 @@ static int elsa_cs_config(struct pcmcia_device *link)
     dev = link->priv;
 
     i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	last_fn = RequestIO;
 	goto cs_failed;
     }
 
     i = pcmcia_request_irq(link, &link->irq);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
         link->irq.AssignedIRQ = 0;
 	last_fn = RequestIRQ;
         goto cs_failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
       last_fn = RequestConfiguration;
       goto cs_failed;
     }
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 21cabd0aadb..623d111544d 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -228,20 +228,20 @@ static int teles_cs_config(struct pcmcia_device *link)
     dev = link->priv;
 
     i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	last_fn = RequestIO;
 	goto cs_failed;
     }
 
     i = pcmcia_request_irq(link, &link->irq);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
         link->irq.AssignedIRQ = 0;
 	last_fn = RequestIRQ;
         goto cs_failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
       last_fn = RequestConfiguration;
       goto cs_failed;
     }
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 8861ca477dd..27b3d96b712 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -118,7 +118,8 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
 		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
 		      dev->offset, mrq.CardOffset);
 		mrq.Page = 0;
-		if( (ret = pcmcia_map_mem_page(win, &mrq)) != CS_SUCCESS) {
+		ret = pcmcia_map_mem_page(win, &mrq);
+		if (ret != 0) {
 			cs_error(dev->p_dev, MapMemPage, ret);
 			return NULL;
 		}
@@ -326,9 +327,8 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
 
 	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
 	ret = pcmcia_modify_configuration(link, &mod);
-	if(ret != CS_SUCCESS) {
+	if (ret != 0)
 		cs_error(link, ModifyConfiguration, ret);
-	}
 }
 
 
@@ -368,14 +368,14 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *link,
 	tuple.DesiredTuple = RETURN_FIRST_TUPLE;
 
 	rc = pcmcia_get_first_tuple(link, &tuple);
-	while(rc == CS_SUCCESS) {
+	while (rc == 0) {
 		rc = pcmcia_get_tuple_data(link, &tuple);
-		if(rc != CS_SUCCESS) {
+		if (rc != 0) {
 			cs_error(link, GetTupleData, rc);
 			break;
 		}
 		rc = pcmcia_parse_tuple(link, &tuple, &parse);
-		if(rc != CS_SUCCESS) {
+		if (rc != 0) {
 			cs_error(link, ParseTuple, rc);
 			break;
 		}
@@ -500,9 +500,8 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 
 	DEBUG(2, "Validating CIS");
 	ret = pcmcia_validate_cis(link, NULL);
-	if(ret != CS_SUCCESS) {
+	if (ret != 0)
 		cs_error(link, GetTupleData, ret);
-	}
 
 	card_settings(dev, link, &new_name);
 
@@ -582,7 +581,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 	link->conf.ConfigIndex = 0;
 	DEBUG(2, "Setting Configuration");
 	ret = pcmcia_request_configuration(link, &link->conf);
-	if(ret != CS_SUCCESS) {
+	if (ret != 0) {
 		cs_error(link, RequestConfiguration, ret);
 		if (dev->win_base) {
 			iounmap(dev->win_base);
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 7112fd5e0e1..08c4dd89607 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -355,9 +355,10 @@ static int tc574_config(struct pcmcia_device *link)
 	for (i = j = 0; j < 0x400; j += 0x20) {
 		link->io.BasePort1 = j ^ 0x300;
 		i = pcmcia_request_io(link, &link->io);
-		if (i == CS_SUCCESS) break;
+		if (i == 0)
+			break;
 	}
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIO, i);
 		goto failed;
 	}
@@ -377,7 +378,7 @@ static int tc574_config(struct pcmcia_device *link)
 	tuple.TupleDataMax = 64;
 	tuple.TupleOffset = 0;
 	tuple.DesiredTuple = 0x88;
-	if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+	if (pcmcia_get_first_tuple(link, &tuple) == 0) {
 		pcmcia_get_tuple_data(link, &tuple);
 		for (i = 0; i < 3; i++)
 			phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 549a6455842..0b28d0d8ffa 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -278,9 +278,10 @@ static int tc589_config(struct pcmcia_device *link)
 	if (multi && (j & 0x80)) continue;
 	link->io.BasePort1 = j ^ 0x300;
 	i = pcmcia_request_io(link, &link->io);
-	if (i == CS_SUCCESS) break;
+	if (i == 0)
+		break;
     }
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestIO, i);
 	goto failed;
     }
@@ -295,7 +296,7 @@ static int tc589_config(struct pcmcia_device *link)
     /* The 3c589 has an extra EEPROM for configuration info, including
        the hardware address.  The 3c562 puts the address in the CIS. */
     tuple.DesiredTuple = 0x88;
-    if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+    if (pcmcia_get_first_tuple(link, &tuple) == 0) {
 	pcmcia_get_tuple_data(link, &tuple);
 	for (i = 0; i < 3; i++)
 	    phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 061d889794c..0bc641adce1 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -262,7 +262,7 @@ static int try_io_port(struct pcmcia_device *link)
 	if (link->io.NumPorts2 > 0) {
 	    /* for master/slave multifunction cards */
 	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	    link->irq.Attributes = 
+	    link->irq.Attributes =
 		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 	}
     } else {
@@ -276,7 +276,8 @@ static int try_io_port(struct pcmcia_device *link)
 	    link->io.BasePort1 = j ^ 0x300;
 	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
 	    ret = pcmcia_request_io(link, &link->io);
-	    if (ret == CS_SUCCESS) return ret;
+	    if (ret == 0)
+		    return ret;
 	}
 	return ret;
     } else {
@@ -327,7 +328,7 @@ static int axnet_config(struct pcmcia_device *link)
     /* don't trust the CIS on this; Linksys got it wrong */
     link->conf.Present = 0x63;
     last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
-    if (last_ret != CS_SUCCESS) {
+    if (last_ret != 0) {
 	cs_error(link, RequestIO, last_ret);
 	goto failed;
     }
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index ea9414c4d90..831090c7562 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -260,21 +260,21 @@ static int com20020_config(struct pcmcia_device *link)
     DEBUG(0, "com20020_config(0x%p)\n", link);
 
     DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
-    i = !CS_SUCCESS;
+    i = -ENODEV;
     if (!link->io.BasePort1)
     {
 	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
 	{
 	    link->io.BasePort1 = ioaddr;
 	    i = pcmcia_request_io(link, &link->io);
-	    if (i == CS_SUCCESS)
+	    if (i == 0)
 		break;
 	}
     }
     else
 	i = pcmcia_request_io(link, &link->io);
     
-    if (i != CS_SUCCESS)
+    if (i != 0)
     {
 	DEBUG(1,"arcnet: requestIO failed totally!\n");
 	goto failed;
@@ -287,7 +287,7 @@ static int com20020_config(struct pcmcia_device *link)
 	   link->irq.AssignedIRQ,
 	   link->irq.IRQInfo1, link->irq.IRQInfo2);
     i = pcmcia_request_irq(link, &link->irq);
-    if (i != CS_SUCCESS)
+    if (i != 0)
     {
 	DEBUG(1,"arcnet: requestIRQ failed totally!\n");
 	goto failed;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index a550c9bd126..0ffd981502e 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -309,7 +309,8 @@ static int mfc_try_io_port(struct pcmcia_device *link)
 	    printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
 	}
 	ret = pcmcia_request_io(link, &link->io);
-	if (ret == CS_SUCCESS) return ret;
+	if (ret == 0)
+		return ret;
     }
     return ret;
 }
@@ -325,7 +326,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
     for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
 	link->io.BasePort1 = ioaddr;
 	ret = pcmcia_request_io(link, &link->io);
-	if (ret == CS_SUCCESS) {
+	if (ret == 0) {
 	    /* calculate ConfigIndex value */
 	    link->conf.ConfigIndex = 
 		((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
@@ -356,7 +357,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
     tuple.TupleOffset = 0;
     tuple.DesiredTuple = CISTPL_FUNCE;
     tuple.TupleOffset = 0;
-    if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+    if (pcmcia_get_first_tuple(link, &tuple) == 0) {
 	/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -430,10 +431,10 @@ static int fmvj18x_config(struct pcmcia_device *link)
     	link->irq.Attributes =
 		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
 	ret = mfc_try_io_port(link);
-	if (ret != CS_SUCCESS) goto cs_failed;
+	if (ret != 0) goto cs_failed;
     } else if (cardtype == UNGERMANN) {
 	ret = ungermann_try_io_port(link);
-	if (ret != CS_SUCCESS) goto cs_failed;
+	if (ret != 0) goto cs_failed;
     } else { 
 	CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
     }
@@ -565,7 +566,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
     i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestWindow, i);
 	return -1;
     }
@@ -599,7 +600,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 
     iounmap(base);
     j = pcmcia_release_window(link->win);
-    if (j != CS_SUCCESS)
+    if (j != 0)
 	cs_error(link, ReleaseWindow, j);
     return (i != 0x200) ? 0 : -1;
 
@@ -620,7 +621,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
     i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestWindow, i);
 	return -1;
     }
@@ -642,7 +643,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 
     iounmap(base);
     j = pcmcia_release_window(link->win);
-    if (j != CS_SUCCESS)
+    if (j != 0)
 	cs_error(link, ReleaseWindow, j);
     return 0;
 
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 4eafa4f42cf..cf3cca4642f 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -238,7 +238,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     /* Try PRIMARY card at 0xA20-0xA23 */
     link->io.BasePort1 = 0xA20;
     i = pcmcia_request_io(link, &link->io);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
 	link->io.BasePort1 = 0xA24;
 	CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index aa17434faa0..1758952b3a3 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -310,7 +310,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
     i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestWindow, i);
 	return NULL;
     }
@@ -333,7 +333,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 
     iounmap(virt);
     j = pcmcia_release_window(link->win);
-    if (j != CS_SUCCESS)
+    if (j != 0)
 	cs_error(link, ReleaseWindow, j);
     return (i < NR_INFO) ? hw_info+i : NULL;
 } /* get_hwinfo */
@@ -504,7 +504,8 @@ static int try_io_port(struct pcmcia_device *link)
 	    link->io.BasePort1 = j ^ 0x300;
 	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
 	    ret = pcmcia_request_io(link, &link->io);
-	    if (ret == CS_SUCCESS) return ret;
+	    if (ret == 0)
+		    return ret;
 	}
 	return ret;
     } else {
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index b3f2085ddca..267cbe0afd1 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -409,8 +409,11 @@ static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
 {
 	int i;
 
-	if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
-			(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+	i = pcmcia_get_first_tuple(handle, tuple);
+	if (i != 0)
+		return i;
+	i = pcmcia_get_tuple_data(handle, tuple);
+	if (i != 0)
 		return i;
 	return pcmcia_parse_tuple(handle, tuple, parse);
 }
@@ -420,8 +423,8 @@ static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
 {
 	int i;
 
-	if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
-			(i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+	if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
+			(i = pcmcia_get_tuple_data(handle, tuple)) != 0)
 		return i;
 	return pcmcia_parse_tuple(handle, tuple, parse);
 }
@@ -509,7 +512,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     req.Base = req.Size = 0;
     req.AccessSpeed = 0;
     i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != CS_SUCCESS)
+    if (i != 0)
 	goto free_cfg_mem;
     smc->base = ioremap(req.Base, req.Size);
     mem.CardOffset = mem.Page = 0;
@@ -517,7 +520,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 	mem.CardOffset = link->conf.ConfigBase;
     i = pcmcia_map_mem_page(link->win, &mem);
 
-    if ((i == CS_SUCCESS)
+    if ((i == 0)
 	&& (smc->manfid == MANFID_MEGAHERTZ)
 	&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
 	mhz_3288_power(link);
@@ -551,12 +554,12 @@ static int mhz_setup(struct pcmcia_device *link)
     /* Read the station address from the CIS.  It is stored as the last
        (fourth) string in the Version 1 Version/ID tuple. */
     tuple->DesiredTuple = CISTPL_VERS_1;
-    if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+    if (first_tuple(link, tuple, parse) != 0) {
 	rc = -1;
 	goto free_cfg_mem;
     }
     /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
-    if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+    if (next_tuple(link, tuple, parse) != 0)
 	first_tuple(link, tuple, parse);
     if (parse->version_1.ns > 3) {
 	station_addr = parse->version_1.str + parse->version_1.ofs[3];
@@ -568,11 +571,11 @@ static int mhz_setup(struct pcmcia_device *link)
 
     /* Another possibility: for the EM3288, in a special tuple */
     tuple->DesiredTuple = 0x81;
-    if (pcmcia_get_first_tuple(link, tuple) != CS_SUCCESS) {
+    if (pcmcia_get_first_tuple(link, tuple) != 0) {
 	rc = -1;
 	goto free_cfg_mem;
     }
-    if (pcmcia_get_tuple_data(link, tuple) != CS_SUCCESS) {
+    if (pcmcia_get_tuple_data(link, tuple) != 0) {
 	rc = -1;
 	goto free_cfg_mem;
     }
@@ -700,12 +703,12 @@ static int smc_setup(struct pcmcia_device *link)
     /* Check for a LAN function extension tuple */
     tuple->DesiredTuple = CISTPL_FUNCE;
     i = first_tuple(link, tuple, parse);
-    while (i == CS_SUCCESS) {
+    while (i == 0) {
 	if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
 	    break;
 	i = next_tuple(link, tuple, parse);
     }
-    if (i == CS_SUCCESS) {
+    if (i == 0) {
 	node_id = (cistpl_lan_node_id_t *)parse->funce.data;
 	if (node_id->nb == 6) {
 	    for (i = 0; i < 6; i++)
@@ -752,9 +755,10 @@ static int osi_config(struct pcmcia_device *link)
     for (i = j = 0; j < 4; j++) {
 	link->io.BasePort2 = com[j];
 	i = pcmcia_request_io(link, &link->io);
-	if (i == CS_SUCCESS) break;
+	if (i == 0)
+		break;
     }
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	/* Fallback: turn off hard decode */
 	link->conf.ConfigIndex = 0x03;
 	link->io.NumPorts2 = 0;
@@ -787,13 +791,13 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
     /* Read the station address from tuple 0x90, subtuple 0x04 */
     tuple->DesiredTuple = 0x90;
     i = pcmcia_get_first_tuple(link, tuple);
-    while (i == CS_SUCCESS) {
+    while (i == 0) {
 	i = pcmcia_get_tuple_data(link, tuple);
-	if ((i != CS_SUCCESS) || (buf[0] == 0x04))
+	if ((i != 0) || (buf[0] == 0x04))
 	    break;
 	i = pcmcia_get_next_tuple(link, tuple);
     }
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	rc = -1;
 	goto free_cfg_mem;
     }
@@ -931,8 +935,11 @@ static int check_sig(struct pcmcia_device *link)
 
 ======================================================================*/
 
-#define CS_EXIT_TEST(ret, svc, label) \
-if (ret != CS_SUCCESS) { cs_error(link, svc, ret); goto label; }
+#define CS_EXIT_TEST(ret, svc, label)	\
+if (ret != 0) {				\
+	cs_error(link, svc, ret);	\
+	goto label; 			\
+}
 
 static int smc91c92_config(struct pcmcia_device *link)
 {
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b8aa16307f7..ab42fb6addf 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -82,13 +82,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	tuple.TupleOffset = 0;
 
 	res = pcmcia_get_first_tuple(dev, &tuple);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 	res = pcmcia_get_tuple_data(dev, &tuple);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 	res = pcmcia_parse_tuple(dev, &tuple, &parse);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 
 	dev->conf.ConfigBase = parse.config.base;
@@ -107,13 +107,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	win.Size = SSB_CORE_SIZE;
 	win.AccessSpeed = 250;
 	res = pcmcia_request_window(&dev, &win, &dev->win);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_kfree_ssb;
 
 	mem.CardOffset = 0;
 	mem.Page = 0;
 	res = pcmcia_map_mem_page(dev->win, &mem);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -121,11 +121,11 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	dev->irq.Handler = NULL; /* The handler is registered later. */
 	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	res = pcmcia_request_configuration(dev, &dev->conf);
-	if (res != CS_SUCCESS)
+	if (res != 0)
 		goto err_disable;
 
 	err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index c768d42d517..2826e674a8e 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -234,7 +234,7 @@ static void sandisk_set_iobase(local_info_t *local)
 	reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
 		       " res=%d\n", res);
 	}
@@ -246,7 +246,7 @@ static void sandisk_set_iobase(local_info_t *local)
 	reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
 		       " res=%d\n", res);
 	}
@@ -322,7 +322,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	reg.Value = COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
 		goto done;
@@ -339,7 +339,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
 		goto done;
@@ -374,7 +374,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 	reg.Value = 0;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
 		       res);
 		return;
@@ -386,7 +386,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 	reg.Value |= COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
 		       res);
 		return;
@@ -399,7 +399,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 		reg.Value |= COR_IREQ_ENA;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
 		       res);
 		return;
@@ -433,7 +433,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value = 0;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
 		       "(%d)\n", res);
 		return;
@@ -446,7 +446,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value |= COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
 		       "(%d)\n", res);
 		return;
@@ -460,7 +460,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Offset = CISREG_CCSR;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
 		       "(%d)\n", res);
 		return;
@@ -472,7 +472,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	reg.Value = old_cor & ~COR_SOFT_RESET;
 	res = pcmcia_access_configuration_register(hw_priv->link,
 						   &reg);
-	if (res != CS_SUCCESS) {
+	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
 		       "(%d)\n", res);
 		return;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index f479c1af678..bf2dd105792 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -749,9 +749,10 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
     for (i = j = 0x0; j < 0x400; j += 0x20) {
 	link->io.BasePort1 = j ^ 0x300;
 	i = pcmcia_request_io(link, &link->io);
-	if (i == CS_SUCCESS) break;
+	if (i == 0)
+		break;
     }
-    if (i != CS_SUCCESS) {
+    if (i != 0) {
 	cs_error(link, RequestIO, i);
 	goto failed;
     }
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 963960dc30f..99c7c8bc257 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -798,9 +798,9 @@ static void ray_release(struct pcmcia_device *link)
     iounmap(local->amem);
     /* Do bother checking to see if these succeed or not */
     i = pcmcia_release_window(local->amem_handle);
-    if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+    if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
     i = pcmcia_release_window(local->rmem_handle);
-    if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+    if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
     pcmcia_disable_device(link);
 
     DEBUG(2,"ray_release ending\n");
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b584c0ecc62..fee9a025053 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3708,7 +3708,7 @@ wv_pcmcia_reset(struct net_device *	dev)
 #endif
 
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3722,7 +3722,7 @@ wv_pcmcia_reset(struct net_device *	dev)
   reg.Action = CS_WRITE;
   reg.Value = reg.Value | COR_SW_RESET;
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3731,7 +3731,7 @@ wv_pcmcia_reset(struct net_device *	dev)
   reg.Action = CS_WRITE;
   reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
   i = pcmcia_access_configuration_register(link, &reg);
-  if(i != CS_SUCCESS)
+  if (i != 0)
     {
       cs_error(link, AccessConfigurationRegister, i);
       return FALSE;
@@ -3909,7 +3909,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
   do
     {
       i = pcmcia_request_io(link, &link->io);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestIO, i);
 	  break;
@@ -3920,7 +3920,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
        * actually assign a handler to the interrupt.
        */
       i = pcmcia_request_irq(link, &link->irq);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestIRQ, i);
 	  break;
@@ -3932,7 +3932,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
        */
       link->conf.ConfigIndex = 1;
       i = pcmcia_request_configuration(link, &link->conf);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestConfiguration, i);
 	  break;
@@ -3948,7 +3948,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
       req.Base = req.Size = 0;
       req.AccessSpeed = mem_speed;
       i = pcmcia_request_window(&link, &req, &link->win);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, RequestWindow, i);
 	  break;
@@ -3960,7 +3960,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
 
       mem.CardOffset = 0; mem.Page = 0;
       i = pcmcia_map_mem_page(link->win, &mem);
-      if(i != CS_SUCCESS)
+      if (i != 0)
 	{
 	  cs_error(link, MapMemPage, i);
 	  break;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 377141995e3..969f53fd705 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1977,10 +1977,10 @@ static int wl3501_config(struct pcmcia_device *link)
 		link->io.BasePort1 = j;
 		link->io.BasePort2 = link->io.BasePort1 + 0x10;
 		i = pcmcia_request_io(link, &link->io);
-		if (i == CS_SUCCESS)
+		if (i == 0)
 			break;
 	}
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIO, i);
 		goto failed;
 	}
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index 911ca0e8dfc..db77e1f3309 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -238,7 +238,7 @@ int __ref cb_alloc(struct pcmcia_socket * s)
 	pci_bus_add_devices(bus);
 
 	s->irq.AssignedIRQ = s->pci_irq;
-	return CS_SUCCESS;
+	return 0;
 }
 
 void cb_free(struct pcmcia_socket * s)
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index fe789e0e7ad..1a513d9a861 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -392,7 +392,7 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
 	return CS_OUT_OF_RESOURCE;
     s->fake_cis_len = len;
     memcpy(s->fake_cis, data, len);
-    return CS_SUCCESS;
+    return 0;
 }
 EXPORT_SYMBOL(pcmcia_replace_cis);
 
@@ -441,9 +441,9 @@ int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple
 	!(tuple->Attributes & TUPLE_RETURN_COMMON)) {
 	cisdata_t req = tuple->DesiredTuple;
 	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-	if (pccard_get_next_tuple(s, function, tuple) == CS_SUCCESS) {
+	if (pccard_get_next_tuple(s, function, tuple) == 0) {
 	    tuple->DesiredTuple = CISTPL_LINKTARGET;
-	    if (pccard_get_next_tuple(s, function, tuple) != CS_SUCCESS)
+	    if (pccard_get_next_tuple(s, function, tuple) != 0)
 		return CS_NO_MORE_ITEMS;
 	} else
 	    tuple->CISOffset = tuple->TupleLink = 0;
@@ -584,7 +584,7 @@ int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function, tuple_
     tuple->TupleCode = link[0];
     tuple->TupleLink = link[1];
     tuple->CISOffset = ofs + 2;
-    return CS_SUCCESS;
+    return 0;
 }
 EXPORT_SYMBOL(pccard_get_next_tuple);
 
@@ -604,11 +604,11 @@ int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple)
     len = tuple->TupleLink - tuple->TupleOffset;
     tuple->TupleDataLen = tuple->TupleLink;
     if (len == 0)
-	return CS_SUCCESS;
+	return 0;
     read_cis_cache(s, SPACE(tuple->Flags),
 		   tuple->CISOffset + tuple->TupleOffset,
 		   _MIN(len, tuple->TupleDataMax), tuple->TupleData);
-    return CS_SUCCESS;
+    return 0;
 }
 EXPORT_SYMBOL(pccard_get_tuple_data);
 
@@ -659,7 +659,7 @@ static int parse_device(tuple_t *tuple, cistpl_device_t *device)
 	if (++p == q) break;
     }
     
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -673,7 +673,7 @@ static int parse_checksum(tuple_t *tuple, cistpl_checksum_t *csum)
     csum->addr = tuple->CISOffset + get_unaligned_le16(p) - 2;
     csum->len = get_unaligned_le16(p + 2);
     csum->sum = *(p + 4);
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -683,7 +683,7 @@ static int parse_longlink(tuple_t *tuple, cistpl_longlink_t *link)
     if (tuple->TupleDataLen < 4)
 	return CS_BAD_TUPLE;
     link->addr = get_unaligned_le32(tuple->TupleData);
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -704,7 +704,7 @@ static int parse_longlink_mfc(tuple_t *tuple,
 	link->fn[i].addr = get_unaligned_le32(p);
 	p += 4;
     }
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -729,9 +729,9 @@ static int parse_strings(u_char *p, u_char *q, int max,
     }
     if (found) {
 	*found = ns;
-	return CS_SUCCESS;
+	return 0;
     } else {
-	return (ns == max) ? CS_SUCCESS : CS_BAD_TUPLE;
+	return (ns == max) ? 0 : CS_BAD_TUPLE;
     }
 }
 
@@ -782,7 +782,7 @@ static int parse_jedec(tuple_t *tuple, cistpl_jedec_t *jedec)
 	p += 2;
     }
     jedec->nid = nid;
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -793,7 +793,7 @@ static int parse_manfid(tuple_t *tuple, cistpl_manfid_t *m)
 	return CS_BAD_TUPLE;
     m->manf = get_unaligned_le16(tuple->TupleData);
     m->card = get_unaligned_le16(tuple->TupleData + 2);
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -806,7 +806,7 @@ static int parse_funcid(tuple_t *tuple, cistpl_funcid_t *f)
     p = (u_char *)tuple->TupleData;
     f->func = p[0];
     f->sysinit = p[1];
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -821,7 +821,7 @@ static int parse_funce(tuple_t *tuple, cistpl_funce_t *f)
     f->type = p[0];
     for (i = 1; i < tuple->TupleDataLen; i++)
 	f->data[i-1] = p[i];
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -847,7 +847,7 @@ static int parse_config(tuple_t *tuple, cistpl_config_t *config)
     for (i = 0; i <= rmsz; i++)
 	config->rmask[i>>2] += p[i] << (8*(i%4));
     config->subtuples = tuple->TupleDataLen - (rasz+rmsz+4);
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*======================================================================
@@ -1122,7 +1122,7 @@ static int parse_cftable_entry(tuple_t *tuple,
 
     entry->subtuples = q-p;
     
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -1138,7 +1138,7 @@ static int parse_bar(tuple_t *tuple, cistpl_bar_t *bar)
     bar->attr = *p;
     p += 2;
     bar->size = get_unaligned_le32(p);
-    return CS_SUCCESS;
+    return 0;
 }
 
 static int parse_config_cb(tuple_t *tuple, cistpl_config_t *config)
@@ -1152,7 +1152,7 @@ static int parse_config_cb(tuple_t *tuple, cistpl_config_t *config)
     p++;
     config->base = get_unaligned_le32(p);
     config->subtuples = tuple->TupleDataLen - 6;
-    return CS_SUCCESS;
+    return 0;
 }
 
 static int parse_cftable_entry_cb(tuple_t *tuple,
@@ -1223,7 +1223,7 @@ static int parse_cftable_entry_cb(tuple_t *tuple,
 
     entry->subtuples = q-p;
     
-    return CS_SUCCESS;
+    return 0;
 }
 
 #endif
@@ -1249,7 +1249,7 @@ static int parse_device_geo(tuple_t *tuple, cistpl_device_geo_t *geo)
 	p += 6;
     }
     geo->ngeo = n;
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -1291,7 +1291,7 @@ static int parse_org(tuple_t *tuple, cistpl_org_t *org)
 	if (*p == '\0') break;
 	if (++p == q) return CS_BAD_TUPLE;
     }
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -1310,14 +1310,14 @@ static int parse_format(tuple_t *tuple, cistpl_format_t *fmt)
     fmt->offset = get_unaligned_le32(p + 2);
     fmt->length = get_unaligned_le32(p + 6);
 
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
 
 int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse)
 {
-    int ret = CS_SUCCESS;
+    int ret = 0;
     
     if (tuple->TupleDataLen > tuple->TupleDataMax)
 	return CS_BAD_TUPLE;
@@ -1388,7 +1388,7 @@ int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse)
 	break;
     case CISTPL_NO_LINK:
     case CISTPL_LINKTARGET:
-	ret = CS_SUCCESS;
+	ret = 0;
 	break;
     default:
 	ret = CS_UNSUPPORTED_FUNCTION;
@@ -1416,12 +1416,14 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t
     tuple.DesiredTuple = code;
     tuple.Attributes = TUPLE_RETURN_COMMON;
     ret = pccard_get_first_tuple(s, function, &tuple);
-    if (ret != CS_SUCCESS) goto done;
+    if (ret != 0)
+	    goto done;
     tuple.TupleData = buf;
     tuple.TupleOffset = 0;
     tuple.TupleDataMax = 255;
     ret = pccard_get_tuple_data(s, &tuple);
-    if (ret != CS_SUCCESS) goto done;
+    if (ret != 0)
+	    goto done;
     ret = pccard_parse_tuple(&tuple, parse);
 done:
     kfree(buf);
@@ -1462,21 +1464,21 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
     tuple->DesiredTuple = RETURN_FIRST_TUPLE;
     tuple->Attributes = TUPLE_RETURN_COMMON;
     ret = pccard_get_first_tuple(s, function, tuple);
-    if (ret != CS_SUCCESS)
+    if (ret != 0)
 	goto done;
 
     /* First tuple should be DEVICE; we should really have either that
        or a CFTABLE_ENTRY of some sort */
     if ((tuple->TupleCode == CISTPL_DEVICE) ||
-	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == CS_SUCCESS) ||
-	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == CS_SUCCESS))
+	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+	(pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
 	dev_ok++;
 
     /* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
        tuple, for card identification.  Certain old D-Link and Linksys
        cards have only a broken VERS_2 tuple; hence the bogus test. */
-    if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == CS_SUCCESS) ||
-	(pccard_read_tuple(s, function, CISTPL_VERS_1, p) == CS_SUCCESS) ||
+    if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
+	(pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
 	(pccard_read_tuple(s, function, CISTPL_VERS_2, p) != CS_NO_MORE_ITEMS))
 	ident_ok++;
 
@@ -1485,7 +1487,8 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
 
     for (count = 1; count < MAX_TUPLES; count++) {
 	ret = pccard_get_next_tuple(s, function, tuple);
-	if (ret != CS_SUCCESS) break;
+	if (ret != 0)
+		break;
 	if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
 	    ((tuple->TupleCode > 0x47) && (tuple->TupleCode < 0x80)) ||
 	    ((tuple->TupleCode > 0x90) && (tuple->TupleCode < 0xff)))
@@ -1500,6 +1503,6 @@ done:
 	    *info = count;
     kfree(tuple);
     kfree(p);
-    return CS_SUCCESS;
+    return 0;
 }
 EXPORT_SYMBOL(pccard_validate_cis);
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index ccdbbe4936f..037cb0c7e09 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -370,7 +370,7 @@ static int socket_reset(struct pcmcia_socket *skt)
 			return CS_NO_CARD;
 
 		if (status & SS_READY)
-			return CS_SUCCESS;
+			return 0;
 
 		msleep(unreset_check * 10);
 	}
@@ -507,7 +507,7 @@ static int socket_insert(struct pcmcia_socket *skt)
 		return CS_NO_CARD;
 
 	ret = socket_setup(skt, setup_delay);
-	if (ret == CS_SUCCESS) {
+	if (ret == 0) {
 		skt->state |= SOCKET_PRESENT;
 
 		dev_printk(KERN_NOTICE, &skt->dev,
@@ -543,7 +543,7 @@ static int socket_suspend(struct pcmcia_socket *skt)
 		skt->ops->suspend(skt);
 	skt->state |= SOCKET_SUSPEND;
 
-	return CS_SUCCESS;
+	return 0;
 }
 
 /*
@@ -568,7 +568,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 	}
 
 	ret = socket_setup(skt, resume_delay);
-	if (ret == CS_SUCCESS) {
+	if (ret == 0) {
 		/*
 		 * FIXME: need a better check here for cardbus cards.
 		 */
@@ -593,7 +593,7 @@ static int socket_resume(struct pcmcia_socket *skt)
 
 	skt->state &= ~SOCKET_SUSPEND;
 
-	return CS_SUCCESS;
+	return 0;
 }
 
 static void socket_remove(struct pcmcia_socket *skt)
@@ -778,14 +778,14 @@ int pccard_reset_card(struct pcmcia_socket *skt)
 			send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW);
 			if (skt->callback)
 				skt->callback->suspend(skt);
-			if (socket_reset(skt) == CS_SUCCESS) {
+			if (socket_reset(skt) == 0) {
 				send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW);
 				if (skt->callback)
 					skt->callback->resume(skt);
 			}
 		}
 
-		ret = CS_SUCCESS;
+		ret = 0;
 	} while (0);
 	mutex_unlock(&skt->skt_mutex);
 
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index a393501554a..20bef0c12c1 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -187,7 +187,7 @@ static int pcmcia_report_error(struct pcmcia_device *p_dev, error_info_t *err)
 	else
 		printk("%s: Unknown error code %#x\n", serv, err->retcode);
 
-	return CS_SUCCESS;
+	return 0;
 } /* report_error */
 
 /* end of code which was in cs.c before */
diff --git a/drivers/pcmcia/ds_internal.h b/drivers/pcmcia/ds_internal.h
index 3a2b25e6ed7..14bc55aa142 100644
--- a/drivers/pcmcia/ds_internal.h
+++ b/drivers/pcmcia/ds_internal.h
@@ -18,6 +18,12 @@ extern int handle_request(struct pcmcia_socket *s, event_t event);
 #else
 static inline void __init pcmcia_setup_ioctl(void) { return; }
 static inline void __exit pcmcia_cleanup_ioctl(void) { return; }
-static inline void handle_event(struct pcmcia_socket *s, event_t event) { return; }
-static inline int handle_request(struct pcmcia_socket *s, event_t event) { return CS_SUCCESS; }
+static inline void handle_event(struct pcmcia_socket *s, event_t event)
+{
+	return;
+}
+static inline int handle_request(struct pcmcia_socket *s, event_t event)
+{
+	return 0;
+}
 #endif
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 53dadc11100..ef64ceb5e75 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -167,7 +167,7 @@ static int adjust_irq(struct pcmcia_socket *s, adjust_t *adj)
 #else
 
 static inline int adjust_irq(struct pcmcia_socket *s, adjust_t *adj) {
-	return CS_SUCCESS;
+	return 0;
 }
 
 #endif
@@ -274,7 +274,7 @@ static int pccard_get_status(struct pcmcia_socket *s,
 			status->CardState |=
 				(reg & ESR_REQ_ATTN) ? CS_EVENT_REQUEST_ATTENTION : 0;
 		}
-		return CS_SUCCESS;
+		return 0;
 	}
 	status->CardState |=
 		(val & SS_WRPROT) ? CS_EVENT_WRITE_PROTECT : 0;
@@ -284,7 +284,7 @@ static int pccard_get_status(struct pcmcia_socket *s,
 		(val & SS_BATWARN) ? CS_EVENT_BATTERY_LOW : 0;
 	status->CardState |=
 		(val & SS_READY) ? CS_EVENT_READY_CHANGE : 0;
-	return CS_SUCCESS;
+	return 0;
 } /* pccard_get_status */
 
 int pccard_get_configuration_info(struct pcmcia_socket *s,
@@ -315,7 +315,7 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 					config->BasePort1 + 1;
 			}
 		}
-		return CS_SUCCESS;
+		return 0;
 	}
 #endif
 
@@ -331,7 +331,7 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 		config->Attributes = 0;
 		config->Vcc = s->socket.Vcc;
 		config->Vpp1 = config->Vpp2 = s->socket.Vpp;
-		return CS_SUCCESS;
+		return 0;
 	}
 
 	config->Attributes = c->Attributes | CONF_VALID_CLIENT;
@@ -355,7 +355,7 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 	config->Attributes2 = c->io.Attributes2;
 	config->IOAddrLines = c->io.IOAddrLines;
 
-	return CS_SUCCESS;
+	return 0;
 } /* pccard_get_configuration_info */
 
 
@@ -961,7 +961,7 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	err = -EINVAL;
     }
 
-    if ((err == 0) && (ret != CS_SUCCESS)) {
+    if ((err == 0) && (ret != 0)) {
 	ds_dbg(2, "ds_ioctl: ret = %d\n", ret);
 	switch (ret) {
 	case CS_BAD_SOCKET: case CS_NO_CARD:
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index c5a2b005091..48e168e8165 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -192,7 +192,7 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
 		return CS_BAD_ARGS;
 		break;
 	}
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_access_configuration_register */
 EXPORT_SYMBOL(pcmcia_access_configuration_register);
 
@@ -226,7 +226,7 @@ int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle,
 	if (win->ctl.flags & MAP_USE_WAIT)
 		req->Attributes |= WIN_USE_WAIT;
 	*handle = win;
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_get_window */
 EXPORT_SYMBOL(pcmcia_get_window);
 
@@ -241,7 +241,7 @@ int pcmcia_get_mem_page(window_handle_t win, memreq_t *req)
 		return CS_BAD_HANDLE;
 	req->Page = 0;
 	req->CardOffset = win->ctl.card_start;
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_get_mem_page */
 EXPORT_SYMBOL(pcmcia_get_mem_page);
 
@@ -257,7 +257,7 @@ int pcmcia_map_mem_page(window_handle_t win, memreq_t *req)
 	win->ctl.card_start = req->CardOffset;
 	if (s->ops->set_mem_map(s, &win->ctl) != 0)
 		return CS_BAD_OFFSET;
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_map_mem_page */
 EXPORT_SYMBOL(pcmcia_map_mem_page);
 
@@ -328,7 +328,7 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 		}
 	}
 
-	return CS_SUCCESS;
+	return 0;
 } /* modify_configuration */
 EXPORT_SYMBOL(pcmcia_modify_configuration);
 
@@ -363,7 +363,7 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev)
 			}
 	}
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_release_configuration */
 
 
@@ -397,7 +397,7 @@ static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req)
 	if (req->NumPorts2)
 		release_io_space(s, req->BasePort2, req->NumPorts2);
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_release_io */
 
 
@@ -429,7 +429,7 @@ static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 	pcmcia_used_irq[req->AssignedIRQ]--;
 #endif
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_release_irq */
 
 
@@ -458,7 +458,7 @@ int pcmcia_release_window(window_handle_t win)
 
 	win->magic = 0;
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_release_window */
 EXPORT_SYMBOL(pcmcia_release_window);
 
@@ -573,7 +573,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 
 	c->state |= CONFIG_LOCKED;
 	p_dev->_locked = 1;
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_request_configuration */
 EXPORT_SYMBOL(pcmcia_request_configuration);
 
@@ -619,7 +619,7 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
 	c->io = *req;
 	c->state |= CONFIG_IO_REQ;
 	p_dev->_io = 1;
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_request_io */
 EXPORT_SYMBOL(pcmcia_request_io);
 
@@ -740,7 +740,7 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 	pcmcia_used_irq[irq]++;
 #endif
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_request_irq */
 EXPORT_SYMBOL(pcmcia_request_irq);
 
@@ -821,7 +821,7 @@ int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req, window_h
 	}
 	*wh = win;
 
-	return CS_SUCCESS;
+	return 0;
 } /* pcmcia_request_window */
 EXPORT_SYMBOL(pcmcia_request_window);
 
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index 00aacbe731d..9d04fb214ec 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -134,7 +134,7 @@ static int add_interval(struct resource_map *map, u_long base, u_long num)
     if (!q) return CS_OUT_OF_RESOURCE;
     q->base = base; q->num = num;
     q->next = p->next; p->next = q;
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*====================================================================*/
@@ -174,7 +174,7 @@ static int sub_interval(struct resource_map *map, u_long base, u_long num)
 	    }
 	}
     }
-    return CS_SUCCESS;
+    return 0;
 }
 
 /*======================================================================
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 344e570fbb6..ea7e3c0e02d 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -431,10 +431,10 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 {
 	int i;
 	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != CS_SUCCESS)
+	if (i != 0)
 		return CS_NO_MORE_ITEMS;
 	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != CS_SUCCESS)
+	if (i != 0)
 		return i;
 	return pcmcia_parse_tuple(handle, tuple, parse);
 }
@@ -527,7 +527,7 @@ static int simple_config(struct pcmcia_device *link)
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
@@ -541,7 +541,7 @@ found_port:
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		return -1;
 	}
@@ -609,7 +609,7 @@ static int multi_config(struct pcmcia_device *link)
 	}
 
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
@@ -624,7 +624,7 @@ static int multi_config(struct pcmcia_device *link)
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != CS_SUCCESS) {
+	if (i != 0) {
 		cs_error(link, RequestConfiguration, i);
 		return -ENODEV;
 	}
@@ -702,7 +702,7 @@ static int serial_config(struct pcmcia_device * link)
 	/* Is this a compliant multifunction card? */
 	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
 	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
+	info->multi = (first_tuple(link, tuple, parse) == 0);
 
 	/* Is this a multiport card? */
 	tuple->DesiredTuple = CISTPL_MANFID;
@@ -726,7 +726,7 @@ static int serial_config(struct pcmcia_device * link)
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
 	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
 		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-		if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
+		if (first_tuple(link, tuple, parse) == 0) {
 			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
 				info->multi = cf->io.win[0].len >> 3;
 			if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 24c2a46c147..96993080c7d 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -80,7 +80,7 @@ static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
 	reg.Action = CS_WRITE;
 	reg.Value = value;
 	res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
-	if (unlikely(res != CS_SUCCESS))
+	if (unlikely(res != 0))
 		return -EBUSY;
 
 	return 0;
@@ -96,7 +96,7 @@ static int ssb_pcmcia_cfg_read(struct ssb_bus *bus, u8 offset, u8 *value)
 	reg.Offset = offset;
 	reg.Action = CS_READ;
 	res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
-	if (unlikely(res != CS_SUCCESS))
+	if (unlikely(res != 0))
 		return -EBUSY;
 	*value = reg.Value;
 
@@ -638,17 +638,17 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl");
+	GOTO_ERROR_ON(res != 0, "MAC first tpl");
 	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data");
+	GOTO_ERROR_ON(res != 0, "MAC first tpl data");
 	while (1) {
 		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
 		if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
 			break;
 		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl");
+		GOTO_ERROR_ON(res != 0, "MAC next tpl");
 		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data");
+		GOTO_ERROR_ON(res != 0, "MAC next tpl data");
 	}
 	GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
 	memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
@@ -659,9 +659,9 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 	tuple.TupleData = buf;
 	tuple.TupleDataMax = sizeof(buf);
 	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl");
+	GOTO_ERROR_ON(res != 0, "VEN first tpl");
 	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data");
+	GOTO_ERROR_ON(res != 0, "VEN first tpl data");
 	while (1) {
 		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
 		switch (tuple.TupleData[0]) {
@@ -735,9 +735,9 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
 		if (res == CS_NO_MORE_ITEMS)
 			break;
-		GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl");
+		GOTO_ERROR_ON(res != 0, "VEN next tpl");
 		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data");
+		GOTO_ERROR_ON(res != 0, "VEN next tpl data");
 	}
 
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 635d19bea0e91df473a81391ec8f3db2d049a218 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 3 Aug 2008 11:47:29 +0200
Subject: pcmcia: deprecate CS_NO_MORE_ITEMS

CS_NO_MORE_ITEMS is returned by the CIS tuple reading and parsing code if
the end of a tuple chain is reached. As at least one PCMCIA driver relies
on matching this return value, replace it with -ENOSPC which is now
uniquely used for this purpose within the in-kernel pcmcia subsystem.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/cistpl.c          | 10 +++++-----
 drivers/pcmcia/ds.c              |  2 +-
 drivers/pcmcia/pcmcia_ioctl.c    |  2 +-
 drivers/pcmcia/pcmcia_resource.c |  2 +-
 drivers/serial/serial_cs.c       |  2 +-
 drivers/ssb/pcmcia.c             |  2 +-
 include/pcmcia/cs.h              |  2 +-
 7 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 660e162c502..a59e09dd855 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -450,7 +450,7 @@ int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple
 	if (pccard_get_next_tuple(s, function, tuple) == 0) {
 	    tuple->DesiredTuple = CISTPL_LINKTARGET;
 	    if (pccard_get_next_tuple(s, function, tuple) != 0)
-		return CS_NO_MORE_ITEMS;
+		return -ENOSPC;
 	} else
 	    tuple->CISOffset = tuple->TupleLink = 0;
 	tuple->DesiredTuple = req;
@@ -526,7 +526,7 @@ int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function, tuple_
 	/* End of chain?  Follow long link if possible */
 	if (link[0] == CISTPL_END) {
 	    if ((ofs = follow_link(s, tuple)) < 0)
-		return CS_NO_MORE_ITEMS;
+		return -ENOSPC;
 	    attr = SPACE(tuple->Flags);
 	    read_cis_cache(s, attr, ofs, 2, link);
 	}
@@ -584,7 +584,7 @@ int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function, tuple_
     }
     if (i == MAX_TUPLES) {
 	cs_dbg(s, 1, "cs: overrun in pcmcia_get_next_tuple\n");
-	return CS_NO_MORE_ITEMS;
+	return -ENOSPC;
     }
     
     tuple->TupleCode = link[0];
@@ -606,7 +606,7 @@ int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple)
 	return -EINVAL;
 
     if (tuple->TupleLink < tuple->TupleOffset)
-	return CS_NO_MORE_ITEMS;
+	return -ENOSPC;
     len = tuple->TupleLink - tuple->TupleOffset;
     tuple->TupleDataLen = tuple->TupleLink;
     if (len == 0)
@@ -1490,7 +1490,7 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
        cards have only a broken VERS_2 tuple; hence the bogus test. */
     if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
 	(pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
-	(pccard_read_tuple(s, function, CISTPL_VERS_2, p) != CS_NO_MORE_ITEMS))
+	(pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
 	ident_ok++;
 
     if (!dev_ok && !ident_ok)
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7f38eb06c81..591d9627bb2 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -88,7 +88,7 @@ static const lookup_t error_table[] = {
     { CS_BAD_ARGS,		"Bad arguments" },
     { -EACCES,			"Configuration locked" },
     { CS_IN_USE,		"Resource in use" },
-    { CS_NO_MORE_ITEMS,		"No more items" },
+    { -ENOSPC,			"No more items" },
     { CS_OUT_OF_RESOURCE,	"Out of resource" },
     { CS_BAD_TUPLE,		"Bad CIS tuple" }
 };
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index ed8c4fb1e8c..a6289e5a75e 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -973,7 +973,7 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	    err = -EBUSY; break;
 	case CS_OUT_OF_RESOURCE:
 	    err = -ENOSPC; break;
-	case CS_NO_MORE_ITEMS:
+	case -ENOSPC:
 	    err = -ENODATA; break;
 	case -ENOSYS:
 	    err = -ENOSYS; break;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 670465d4aac..8f2c805e793 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -211,7 +211,7 @@ int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle,
 		if (s->state & SOCKET_WIN_REQ(w))
 			break;
 	if (w == MAX_WIN)
-		return CS_NO_MORE_ITEMS;
+		return -EINVAL;
 	win = &s->win[w];
 	req->Base = win->ctl.res->start;
 	req->Size = win->ctl.res->end - win->ctl.res->start + 1;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ea7e3c0e02d..dbb3bf3065f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -432,7 +432,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 	int i;
 	i = pcmcia_get_first_tuple(handle, tuple);
 	if (i != 0)
-		return CS_NO_MORE_ITEMS;
+		return i;
 	i = pcmcia_get_tuple_data(handle, tuple);
 	if (i != 0)
 		return i;
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 96993080c7d..fbfadbac67e 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -733,7 +733,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
 			break;
 		}
 		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		if (res == CS_NO_MORE_ITEMS)
+		if (res == -ENOSPC)
 			break;
 		GOTO_ERROR_ON(res != 0, "VEN next tpl");
 		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 2dc1411b27c..20440defd1d 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -315,7 +315,7 @@ typedef struct error_info_t {
 #define CS_BAD_ARGS		0x1c
 #define CS_CONFIGURATION_LOCKED	-EACCES
 #define CS_IN_USE		-EBUSY
-#define CS_NO_MORE_ITEMS	0x1f
+#define CS_NO_MORE_ITEMS	-ENOSPC
 #define CS_OUT_OF_RESOURCE	-ENOMEM
 #define CS_BAD_HANDLE		-EINVAL
 
-- 
cgit v1.2.3-70-g09d2


From fd098316ef533e8441576f020ead4beab93154ce Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 31 Aug 2008 01:23:17 -0700
Subject: sparc: Annotate of_device_id arrays with const or __initdata.

As suggested by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/parport.h    | 2 +-
 arch/sparc/kernel/apc.c             | 2 +-
 arch/sparc/kernel/pmc.c             | 2 +-
 arch/sparc/kernel/time.c            | 2 +-
 arch/sparc64/kernel/auxio.c         | 2 +-
 arch/sparc64/kernel/chmc.c          | 2 +-
 arch/sparc64/kernel/pci_fire.c      | 2 +-
 arch/sparc64/kernel/pci_psycho.c    | 2 +-
 arch/sparc64/kernel/pci_sabre.c     | 2 +-
 arch/sparc64/kernel/pci_schizo.c    | 2 +-
 arch/sparc64/kernel/pci_sun4v.c     | 2 +-
 arch/sparc64/kernel/power.c         | 2 +-
 arch/sparc64/kernel/time.c          | 6 +++---
 drivers/atm/fore200e.c              | 2 +-
 drivers/char/hw_random/n2-drv.c     | 2 +-
 drivers/hwmon/ultra45_env.c         | 2 +-
 drivers/input/misc/sparcspkr.c      | 4 ++--
 drivers/input/serio/i8042-sparcio.h | 2 +-
 drivers/mtd/maps/sun_uflash.c       | 2 +-
 drivers/net/myri_sbus.c             | 2 +-
 drivers/net/niu.c                   | 2 +-
 drivers/net/sunbmac.c               | 2 +-
 drivers/net/sunhme.c                | 2 +-
 drivers/net/sunlance.c              | 2 +-
 drivers/net/sunqe.c                 | 2 +-
 drivers/parport/parport_sunbpp.c    | 2 +-
 drivers/sbus/char/bbc_i2c.c         | 2 +-
 drivers/sbus/char/display7seg.c     | 2 +-
 drivers/sbus/char/envctrl.c         | 2 +-
 drivers/sbus/char/flash.c           | 2 +-
 drivers/sbus/char/uctrl.c           | 2 +-
 drivers/scsi/qlogicpti.c            | 2 +-
 drivers/scsi/sun_esp.c              | 2 +-
 drivers/serial/sunhv.c              | 2 +-
 drivers/serial/sunsab.c             | 2 +-
 drivers/serial/sunsu.c              | 2 +-
 drivers/serial/sunzilog.c           | 2 +-
 drivers/video/bw2.c                 | 2 +-
 drivers/video/cg14.c                | 2 +-
 drivers/video/cg3.c                 | 2 +-
 drivers/video/cg6.c                 | 2 +-
 drivers/video/ffb.c                 | 2 +-
 drivers/video/leo.c                 | 2 +-
 drivers/video/p9100.c               | 2 +-
 drivers/video/tcx.c                 | 2 +-
 drivers/watchdog/cpwd.c             | 2 +-
 drivers/watchdog/riowd.c            | 2 +-
 sound/sparc/amd7930.c               | 2 +-
 sound/sparc/cs4231.c                | 2 +-
 sound/sparc/dbri.c                  | 2 +-
 50 files changed, 53 insertions(+), 53 deletions(-)

(limited to 'drivers/serial')

diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index 70dce0273f9..dff3f0253aa 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -215,7 +215,7 @@ static int __devexit ecpp_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id ecpp_match[] = {
+static const struct of_device_id ecpp_match[] = {
 	{
 		.name = "ecpp",
 	},
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 0a20cd85fd3..4dd1ba752ce 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -182,7 +182,7 @@ static int __devinit apc_probe(struct of_device *op,
 	return 0;
 }
 
-static struct of_device_id apc_match[] = {
+static struct of_device_id __initdata apc_match[] = {
 	{
 		.name = APC_OBPNAME,
 	},
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 9976e82e323..814eb3ce039 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -72,7 +72,7 @@ static int __devinit pmc_probe(struct of_device *op,
 	return 0;
 }
 
-static struct of_device_id pmc_match[] = {
+static struct of_device_id __initdata pmc_match[] = {
 	{
 		.name = PMC_OBPNAME,
 	},
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index a713bb43db8..339c4762fbc 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -338,7 +338,7 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id
 	return 0;
 }
 
-static struct of_device_id clock_match[] = {
+static struct of_device_id __initdata clock_match[] = {
 	{
 		.name = "eeprom",
 	},
diff --git a/arch/sparc64/kernel/auxio.c b/arch/sparc64/kernel/auxio.c
index dd5c7bf8761..858beda8652 100644
--- a/arch/sparc64/kernel/auxio.c
+++ b/arch/sparc64/kernel/auxio.c
@@ -109,7 +109,7 @@ void auxio_set_lte(int on)
 	}
 }
 
-static struct of_device_id auxio_match[] = {
+static struct of_device_id __initdata auxio_match[] = {
 	{
 		.name = "auxio",
 	},
diff --git a/arch/sparc64/kernel/chmc.c b/arch/sparc64/kernel/chmc.c
index 3e14952e940..2ed401087ca 100644
--- a/arch/sparc64/kernel/chmc.c
+++ b/arch/sparc64/kernel/chmc.c
@@ -801,7 +801,7 @@ static int __devexit us3mc_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id us3mc_match[] = {
+static const struct of_device_id us3mc_match[] = {
 	{
 		.name = "memory-controller",
 	},
diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c
index adc3fe44b08..477928aad53 100644
--- a/arch/sparc64/kernel/pci_fire.c
+++ b/arch/sparc64/kernel/pci_fire.c
@@ -547,7 +547,7 @@ out_free:
 	return err;
 }
 
-static struct of_device_id fire_match[] = {
+static struct of_device_id __initdata fire_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pciex108e,80f0",
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 4e8f87aad20..708212a6e7e 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1099,7 +1099,7 @@ out_free:
 	return err;
 }
 
-static struct of_device_id psycho_match[] = {
+static struct of_device_id __initdata psycho_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,8000",
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 7cce4d8f4aa..cc476e9a275 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -885,7 +885,7 @@ out_free:
 	return err;
 }
 
-static struct of_device_id sabre_match[] = {
+static struct of_device_id __initdata sabre_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a001",
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index b95dd548583..18fdd887b4a 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1504,7 +1504,7 @@ static int __devinit schizo_probe(struct of_device *op,
  * and pci108e,8001.  So list the chips in reverse chronological
  * order.
  */
-static struct of_device_id schizo_match[] = {
+static struct of_device_id __initdata schizo_match[] = {
 	{
 		.name = "pci",
 		.compatible = "pci108e,a801",
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index c1e72beade2..fea51a054be 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -1026,7 +1026,7 @@ out_free:
 	return -ENOMEM;
 }
 
-static struct of_device_id pci_sun4v_match[] = {
+static struct of_device_id __initdata pci_sun4v_match[] = {
 	{
 		.name = "pci",
 		.compatible = "SUNW,sun4v-pci",
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index 7536255ab57..7559ad395a3 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -89,7 +89,7 @@ static int __devinit power_probe(struct of_device *op, const struct of_device_id
 	return 0;
 }
 
-static struct of_device_id power_match[] = {
+static struct of_device_id __initdata power_match[] = {
 	{
 		.name = "power",
 	},
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index ea05038a8c1..209e7d28c3a 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -438,7 +438,7 @@ static int __devinit rtc_probe(struct of_device *op, const struct of_device_id *
 	return platform_device_register(&rtc_cmos_device);
 }
 
-static struct of_device_id rtc_match[] = {
+static struct of_device_id __initdata rtc_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "m5819",
@@ -482,7 +482,7 @@ static int __devinit bq4802_probe(struct of_device *op, const struct of_device_i
 	return platform_device_register(&rtc_bq4802_device);
 }
 
-static struct of_device_id bq4802_match[] = {
+static struct of_device_id __initdata bq4802_match[] = {
 	{
 		.name = "rtc",
 		.compatible = "bq4802",
@@ -566,7 +566,7 @@ static int __devinit mostek_probe(struct of_device *op, const struct of_device_i
 	return platform_device_register(&m48t59_rtc);
 }
 
-static struct of_device_id mostek_match[] = {
+static struct of_device_id __initdata mostek_match[] = {
 	{
 		.name = "eeprom",
 	},
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index c2fa9fdc5d3..937c9c0ef4c 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2685,7 +2685,7 @@ static int __devexit fore200e_sba_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id fore200e_sba_match[] = {
+static const struct of_device_id fore200e_sba_match[] = {
 	{
 		.name = SBA200E_PROM_NAME,
 		.data = (void *) &fore200e_bus[1],
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 5220f541df2..8859aeac2d2 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -736,7 +736,7 @@ static int __devexit n2rng_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id n2rng_match[] = {
+static const struct of_device_id n2rng_match[] = {
 	{
 		.name		= "random-number-generator",
 		.compatible	= "SUNW,n2-rng",
diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c
index 9aec95cbf7e..68e90abeba9 100644
--- a/drivers/hwmon/ultra45_env.c
+++ b/drivers/hwmon/ultra45_env.c
@@ -290,7 +290,7 @@ static int __devexit env_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id env_match[] = {
+static const struct of_device_id env_match[] = {
 	{
 		.name = "env-monitor",
 		.compatible = "SUNW,ebus-pic16f747-env",
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index d8765cc93d2..c4f42311fde 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -249,7 +249,7 @@ static int bbc_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id bbc_beep_match[] = {
+static const struct of_device_id bbc_beep_match[] = {
 	{
 		.name = "beep",
 		.compatible = "SUNW,bbc-beep",
@@ -328,7 +328,7 @@ static int grover_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id grover_beep_match[] = {
+static const struct of_device_id grover_beep_match[] = {
 	{
 		.name = "beep",
 		.compatible = "SUNW,smbus-beep",
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index 692a79ec2a2..5071af2c060 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -87,7 +87,7 @@ static int __devexit sparc_i8042_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id sparc_i8042_match[] = {
+static const struct of_device_id sparc_i8042_match[] = {
 	{
 		.name = "8042",
 	},
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index e931f1df0af..fd7a1017399 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -138,7 +138,7 @@ static int __devexit uflash_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id uflash_match[] = {
+static const struct of_device_id uflash_match[] = {
 	{
 		.name = UFLASH_OBPNAME,
 	},
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 03867b10f37..979d778b133 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1125,7 +1125,7 @@ static int __devexit myri_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id myri_sbus_match[] = {
+static const struct of_device_id myri_sbus_match[] = {
 	{
 		.name = "MYRICOM,mlanai",
 	},
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index e4765b713ab..016d9e08692 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -9074,7 +9074,7 @@ static int __devexit niu_of_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id niu_match[] = {
+static const struct of_device_id niu_match[] = {
 	{
 		.name = "network",
 		.compatible = "SUNW,niusl",
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 7009a5e36c9..3f342b35a77 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -1281,7 +1281,7 @@ static int __devexit bigmac_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id bigmac_sbus_match[] = {
+static const struct of_device_id bigmac_sbus_match[] = {
 	{
 		.name = "be",
 	},
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index dc46e97ac12..f1ebeb5f65b 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -3252,7 +3252,7 @@ static int __devexit hme_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id hme_sbus_match[] = {
+static const struct of_device_id hme_sbus_match[] = {
 	{
 		.name = "SUNW,hme",
 	},
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 292feb2154b..30cdb81853b 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1571,7 +1571,7 @@ static int __devexit sunlance_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id sunlance_sbus_match[] = {
+static const struct of_device_id sunlance_sbus_match[] = {
 	{
 		.name = "le",
 	},
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 81604cac8e3..f63644744ff 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -965,7 +965,7 @@ static int __devexit qec_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id qec_sbus_match[] = {
+static const struct of_device_id qec_sbus_match[] = {
 	{
 		.name = "qe",
 	},
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index e4f00c6dfe0..065f229580d 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -372,7 +372,7 @@ static int __devexit bpp_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id bpp_match[] = {
+static const struct of_device_id bpp_match[] = {
 	{
 		.name = "SUNW,bpp",
 	},
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index af7f4af6c5f..f08e169ba1b 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -404,7 +404,7 @@ static int __devexit bbc_i2c_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id bbc_i2c_match[] = {
+static const struct of_device_id bbc_i2c_match[] = {
 	{
 		.name = "i2c",
 		.compatible = "SUNW,bbc-i2c",
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 2f16d78e92d..2550af4ae43 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -256,7 +256,7 @@ static int __devexit d7s_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id d7s_match[] = {
+static const struct of_device_id d7s_match[] = {
 	{
 		.name = "display7seg",
 	},
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index ea8c35cbffd..58e583b61e6 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -1120,7 +1120,7 @@ static int __devexit envctrl_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id envctrl_match[] = {
+static const struct of_device_id envctrl_match[] = {
 	{
 		.name = "i2c",
 		.compatible = "i2cpcf,8584",
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 715996f5c53..41083472ff4 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -199,7 +199,7 @@ static int __devexit flash_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id flash_match[] = {
+static const struct of_device_id flash_match[] = {
 	{
 		.name = "flashprom",
 	},
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 6cff9777bbc..27993c37775 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -417,7 +417,7 @@ static int __devexit uctrl_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id uctrl_match[] = {
+static const struct of_device_id uctrl_match[] = {
 	{
 		.name = "uctrl",
 	},
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index b6ce82d3de3..42807671512 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1415,7 +1415,7 @@ static int __devexit qpti_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id qpti_match[] = {
+static const struct of_device_id qpti_match[] = {
 	{
 		.name = "ptisp",
 		.data = &qpti_template,
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index 97316ca28a7..3d73aad4bc8 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -617,7 +617,7 @@ static int __devexit esp_sbus_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id esp_match[] = {
+static const struct of_device_id esp_match[] = {
 	{
 		.name = "SUNW,esp",
 	},
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index e41766d0803..a94a2ab4b57 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -616,7 +616,7 @@ static int __devexit hv_remove(struct of_device *dev)
 	return 0;
 }
 
-static struct of_device_id hv_match[] = {
+static const struct of_device_id hv_match[] = {
 	{
 		.name = "console",
 		.compatible = "qcn",
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 29b4458abf7..0355efe115d 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1078,7 +1078,7 @@ static int __devexit sab_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id sab_match[] = {
+static const struct of_device_id sab_match[] = {
 	{
 		.name = "se",
 	},
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index a378464f929..a4dc79b1d7a 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1506,7 +1506,7 @@ static int __devexit su_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id su_match[] = {
+static const struct of_device_id su_match[] = {
 	{
 		.name = "su",
 	},
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 3cb4c8aee13..45a299f3561 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1480,7 +1480,7 @@ static int __devexit zs_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id zs_match[] = {
+static const struct of_device_id zs_match[] = {
 	{
 		.name = "zs",
 	},
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index e721644bad7..1e35ba6f18e 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -372,7 +372,7 @@ static int __devexit bw2_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id bw2_match[] = {
+static const struct of_device_id bw2_match[] = {
 	{
 		.name = "bwtwo",
 	},
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index b17e7467177..a2d1882791a 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -589,7 +589,7 @@ static int __devexit cg14_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id cg14_match[] = {
+static const struct of_device_id cg14_match[] = {
 	{
 		.name = "cgfourteen",
 	},
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 3aa7b6cb026..99f87fb61d0 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -456,7 +456,7 @@ static int __devexit cg3_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id cg3_match[] = {
+static const struct of_device_id cg3_match[] = {
 	{
 		.name = "cgthree",
 	},
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 2f64bb3bd25..9eaa63ab08f 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -814,7 +814,7 @@ static int __devexit cg6_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id cg6_match[] = {
+static const struct of_device_id cg6_match[] = {
 	{
 		.name = "cgsix",
 	},
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 7992b13ee68..9dbb9646081 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -1042,7 +1042,7 @@ static int __devexit ffb_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id ffb_match[] = {
+static const struct of_device_id ffb_match[] = {
 	{
 		.name = "SUNW,ffb",
 	},
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 13fea61d6ae..465459e5eae 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -641,7 +641,7 @@ static int __devexit leo_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id leo_match[] = {
+static const struct of_device_id leo_match[] = {
 	{
 		.name = "SUNW,leo",
 	},
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 9e903454ffc..7000f2cd585 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -349,7 +349,7 @@ static int __devexit p9100_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id p9100_match[] = {
+static const struct of_device_id p9100_match[] = {
 	{
 		.name = "p9100",
 	},
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index 2a03f78bbb0..643afbfe827 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -505,7 +505,7 @@ static int __devexit tcx_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id tcx_match[] = {
+static const struct of_device_id tcx_match[] = {
 	{
 		.name = "SUNW,tcx",
 	},
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 1f1ee2520f1..084dfe9cecf 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -666,7 +666,7 @@ static int __devexit cpwd_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id cpwd_match[] = {
+static const struct of_device_id cpwd_match[] = {
 	{
 		.name = "watchdog",
 	},
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index 04fd1bac2db..09cb1833ea2 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -230,7 +230,7 @@ static int __devexit riowd_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id riowd_match[] = {
+static const struct of_device_id riowd_match[] = {
 	{
 		.name = "pmc",
 	},
diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c
index 0f82c3f6cfd..5af5503edad 100644
--- a/sound/sparc/amd7930.c
+++ b/sound/sparc/amd7930.c
@@ -1070,7 +1070,7 @@ out_err:
 	return err;
 }
 
-static struct of_device_id amd7930_match[] = {
+static const struct of_device_id amd7930_match[] = {
 	{
 		.name = "audio",
 	},
diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c
index cdbfae96bd8..727438d276e 100644
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -2094,7 +2094,7 @@ static int __devexit cs4231_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id cs4231_match[] = {
+static const struct of_device_id cs4231_match[] = {
 	{
 		.name = "SUNW,CS4231",
 	},
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 446f985b76f..2edb0ad3de7 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -2665,7 +2665,7 @@ static int __devexit dbri_remove(struct of_device *op)
 	return 0;
 }
 
-static struct of_device_id dbri_match[] = {
+static const struct of_device_id dbri_match[] = {
 	{
 		.name = "SUNW,DBRIe",
 	},
-- 
cgit v1.2.3-70-g09d2


From 2f3061eb1086f98990d6495b8c63a1b83f2f59aa Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 31 Aug 2008 15:50:33 +0200
Subject: pcmcia: remove unused argument to pcmcia_parse_tuple()

Since we're just parsing the tuple being passed to this function, we don't
need any device-specific information.

Also, remove the call to pcmcia_validate_cis() from pcmciamtd.c, since it
is already called by the PCMCIA core.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/char/pcmcia/ipwireless/main.c   |  6 +++---
 drivers/char/pcmcia/synclink_cs.c       |  2 +-
 drivers/mtd/maps/pcmciamtd.c            |  7 +------
 drivers/net/pcmcia/fmvj18x_cs.c         |  2 +-
 drivers/net/pcmcia/smc91c92_cs.c        |  4 ++--
 drivers/net/pcmcia/xirc2ps_cs.c         |  4 ++--
 drivers/net/wireless/b43/pcmcia.c       |  2 +-
 drivers/net/wireless/hostap/hostap_cs.c |  2 +-
 drivers/net/wireless/libertas/if_cs.c   |  2 +-
 drivers/pcmcia/cistpl.c                 |  6 +++---
 drivers/pcmcia/cs_internal.h            |  2 ++
 drivers/pcmcia/pcmcia_ioctl.c           |  2 +-
 drivers/pcmcia/pcmcia_resource.c        |  2 +-
 drivers/serial/serial_cs.c              |  2 +-
 include/pcmcia/cistpl.h                 | 11 ++---------
 15 files changed, 23 insertions(+), 33 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index dcf2b59ca8c..5216fce0c62 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -127,7 +127,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit0;
 	}
 
-	ret = pcmcia_parse_tuple(link, &tuple, &parse);
+	ret = pcmcia_parse_tuple(&tuple, &parse);
 
 	if (ret != 0) {
 		cs_error(link, ParseTuple, ret);
@@ -163,7 +163,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit0;
 	}
 
-	ret = pcmcia_parse_tuple(link, &tuple, &parse);
+	ret = pcmcia_parse_tuple(&tuple, &parse);
 
 	if (ret != 0) {
 		cs_error(link, GetTupleData, ret);
@@ -206,7 +206,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 		goto exit1;
 	}
 
-	ret = pcmcia_parse_tuple(link, &tuple, &parse);
+	ret = pcmcia_parse_tuple(&tuple, &parse);
 
 	if (ret != 0) {
 		cs_error(link, ParseTuple, ret);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index d1fceabe3ae..05bf9c55ecc 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -604,7 +604,7 @@ static int mgslpc_config(struct pcmcia_device *link)
 
     cfg = &(parse.cftable_entry);
     CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-    CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+    CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
 
     if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
     if (cfg->index == 0)
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 27b3d96b712..d600c2deff7 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -374,7 +374,7 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *link,
 			cs_error(link, GetTupleData, rc);
 			break;
 		}
-		rc = pcmcia_parse_tuple(link, &tuple, &parse);
+		rc = pcmcia_parse_tuple(&tuple, &parse);
 		if (rc != 0) {
 			cs_error(link, ParseTuple, rc);
 			break;
@@ -498,11 +498,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
 
 	DEBUG(3, "link=0x%p", link);
 
-	DEBUG(2, "Validating CIS");
-	ret = pcmcia_validate_cis(link, NULL);
-	if (ret != 0)
-		cs_error(link, GetTupleData, ret);
-
 	card_settings(dev, link, &new_name);
 
 	dev->pcmcia_map.phys = NO_XIP;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 0ffd981502e..69d916daa7b 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -362,7 +362,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
 	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-	CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
 	link->conf.ConfigIndex = parse.cftable_entry.index;
 	switch (link->manf_id) {
 	case MANFID_TDK:
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 918b4a3eca5..c74d6656d26 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -415,7 +415,7 @@ static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
 	i = pcmcia_get_tuple_data(handle, tuple);
 	if (i != 0)
 		return i;
-	return pcmcia_parse_tuple(handle, tuple, parse);
+	return pcmcia_parse_tuple(tuple, parse);
 }
 
 static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
@@ -426,7 +426,7 @@ static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
 	if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
 			(i = pcmcia_get_tuple_data(handle, tuple)) != 0)
 		return i;
-	return pcmcia_parse_tuple(handle, tuple, parse);
+	return pcmcia_parse_tuple(tuple, parse);
 }
 
 /*======================================================================
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index d97e6e917c3..8366bfc7d28 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -377,7 +377,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
 
 	if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
 			(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
-		err = pcmcia_parse_tuple(handle, tuple, parse);
+		err = pcmcia_parse_tuple(tuple, parse);
 	return err;
 }
 
@@ -388,7 +388,7 @@ next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
 
 	if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
 			(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
-		err = pcmcia_parse_tuple(handle, tuple, parse);
+		err = pcmcia_parse_tuple(tuple, parse);
 	return err;
 }
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index ab42fb6addf..3cfc30307a2 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -87,7 +87,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	res = pcmcia_get_tuple_data(dev, &tuple);
 	if (res != 0)
 		goto err_kfree_ssb;
-	res = pcmcia_parse_tuple(dev, &tuple, &parse);
+	res = pcmcia_parse_tuple(&tuple, &parse);
 	if (res != 0)
 		goto err_kfree_ssb;
 
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2826e674a8e..63374027735 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -305,7 +305,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
 	if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
 	    pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
-	    pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
+	    pcmcia_parse_tuple(&tuple, parse) ||
 		parse->longlink_mfc.nfn < 2) {
 		/* No multi-function links found */
 		ret = -ENODEV;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 04d7a251e3f..e2fe2d67732 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -798,7 +798,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
 	if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
 	    (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
-	    (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+	    (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
 	{
 		lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
 		goto out1;
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 772fc96d5ec..dcce9f5d846 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -1359,7 +1359,7 @@ static int parse_format(tuple_t *tuple, cistpl_format_t *fmt)
 
 /*====================================================================*/
 
-int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse)
+int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse)
 {
     int ret = 0;
     
@@ -1442,7 +1442,7 @@ int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse)
 	    __cs_dbg(0, "parse_tuple failed %d\n", ret);
     return ret;
 }
-EXPORT_SYMBOL(pccard_parse_tuple);
+EXPORT_SYMBOL(pcmcia_parse_tuple);
 
 /*======================================================================
 
@@ -1472,7 +1472,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t
     ret = pccard_get_tuple_data(s, &tuple);
     if (ret != 0)
 	    goto done;
-    ret = pccard_parse_tuple(&tuple, parse);
+    ret = pcmcia_parse_tuple(&tuple, parse);
 done:
     kfree(buf);
     return ret;
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index d71eeee4992..79615e6d540 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -197,6 +197,8 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
 		      cisdata_t code, void *parse);
 int pcmcia_replace_cis(struct pcmcia_socket *s,
 		       const u8 *data, const size_t len);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
+			unsigned int *count);
 
 /* rsrc_mgr.c */
 int pcmcia_validate_mem(struct pcmcia_socket *s);
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 579ec945570..1703b20cad5 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -858,7 +858,7 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	break;
     case DS_PARSE_TUPLE:
 	buf->tuple.TupleData = buf->tuple_parse.data;
-	ret = pccard_parse_tuple(&buf->tuple, &buf->tuple_parse.parse);
+	ret = pcmcia_parse_tuple(&buf->tuple, &buf->tuple_parse.parse);
 	break;
     case DS_RESET_CARD:
 	ret = pcmcia_reset_card(s);
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 93a270e15ce..afea2b2558b 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -937,7 +937,7 @@ int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		if (pcmcia_get_tuple_data(p_dev, tuple))
 			goto next_entry;
 
-		if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse))
+		if (pcmcia_parse_tuple(tuple, &cfg_mem->parse))
 			goto next_entry;
 
 		/* default values */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index dbb3bf3065f..7546aa887fa 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -436,7 +436,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
 	i = pcmcia_get_tuple_data(handle, tuple);
 	if (i != 0)
 		return i;
-	return pcmcia_parse_tuple(handle, tuple, parse);
+	return pcmcia_parse_tuple(tuple, parse);
 }
 
 /*====================================================================*/
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index 7e8c2bcf11a..353abe74be7 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -583,13 +583,12 @@ typedef struct cisinfo_t {
 #ifdef __KERNEL__
 struct pcmcia_socket;
 
+int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse);
+
 /* don't use outside of PCMCIA core yet */
 int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple);
 int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function, tuple_t *tuple);
 int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
-int pccard_parse_tuple(tuple_t *tuple, cisparse_t *parse);
-
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *count);
 
 /* ... but use these wrappers instead */
 #define pcmcia_get_first_tuple(p_dev, tuple) \
@@ -601,12 +600,6 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned
 #define pcmcia_get_tuple_data(p_dev, tuple) \
 		pccard_get_tuple_data(p_dev->socket, tuple)
 
-#define pcmcia_parse_tuple(p_dev, tuple, parse) \
-		pccard_parse_tuple(tuple, parse)
-
-#define pcmcia_validate_cis(p_dev, info) \
-		pccard_validate_cis(p_dev->socket, p_dev->func, info)
-
 int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
 						 cistpl_cftable_entry_t *cf,
-- 
cgit v1.2.3-70-g09d2


From c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4 Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Tue, 2 Sep 2008 10:19:29 +0200
Subject: i.MX serial: fix init failure

Adds extra "out" label to probe function after calling .init form platform data.
Because .init can return error number caused by gpio request fail.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 6a29f9330a7..20189c447e9 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1133,13 +1133,19 @@ static int serial_imx_probe(struct platform_device *pdev)
 	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
 		sport->have_rtscts = 1;
 
-	if (pdata->init)
-		pdata->init(pdev);
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret)
+			goto clkput;
+	}
 
 	uart_add_one_port(&imx_reg, &sport->port);
 	platform_set_drvdata(pdev, &sport->port);
 
 	return 0;
+clkput:
+	clk_put(sport->clk);
+	clk_disable(sport->clk);
 unmap:
 	iounmap(sport->port.membase);
 free:
-- 
cgit v1.2.3-70-g09d2


From 4411805b13d4b8c31870b276c2730d585b062db7 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 28 Jul 2008 12:10:34 +0200
Subject: imx serial: set RXD mux bit on i.MX27 and i.MX31

RX in i.MX27 and i.MX31 UART lines does not work unless the
"RXD  Muxed Input Select" bit is set on i.MX27 and i.MX31 processors.

This patch sets the missing RXD mux bit in the UCR3 register.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 20189c447e9..312653e2f71 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -127,8 +127,13 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define  UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
 #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
 	temp |= (UCR2_RXEN | UCR2_TXEN);
 	writel(temp, sport->port.membase + UCR2);
 
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+	temp = readl(sport->port.membase + UCR3);
+	temp |= UCR3_RXDMUXSEL;
+	writel(temp, sport->port.membase + UCR3);
+#endif
+
 	/*
 	 * Enable modem status interrupts
 	 */
-- 
cgit v1.2.3-70-g09d2


From 9fbe604456c5ae21768f1c98379e1b81c72adcd3 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 28 Jul 2008 21:26:01 +0200
Subject: imx serial: fix rts handling for non imx1 based hardware

The interrupt handler for muxed interrupts (imx2/imx3) was calling
the rts handling subroutine if the RTSS bit was set.
(Which indicates the status of the RTS line), leading to an
interrupt flood on RTS bit low.

This patch fixes the problem by looking at the RTSD bit instead,
indicating a change in the RTS line.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 312653e2f71..3f90f1bbbbc 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -450,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
 			readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
 		imx_txint(irq, dev_id);
 
-	if (sts & USR1_RTSS)
+	if (sts & USR1_RTSD)
 		imx_rtsint(irq, dev_id);
 
 	return IRQ_HANDLED;
-- 
cgit v1.2.3-70-g09d2


From 2276f03b745c297733e41470dde7f32bdd4b52af Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 6 Sep 2008 23:01:32 +0100
Subject: [ARM] 5244/1: Add hardware CTSRTS flow control to pxa serial driver

Adds hardware CTSRTS control for pxa serial devices through
termios controls.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/serial/pxa.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/serial')

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index f7a0d37c422..abc00be5543 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -534,6 +534,11 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	serial_out(up, UART_IER, up->ier);
 
+	if (termios->c_cflag & CRTSCTS)
+		up->mcr |= UART_MCR_AFE;
+	else
+		up->mcr &= ~UART_MCR_AFE;
+
 	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
 	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
 	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
-- 
cgit v1.2.3-70-g09d2


From f05596dbc922276ed675c713519220bae8042e32 Mon Sep 17 00:00:00 2001
From: Anti Sullin <anti.sullin@artecdesign.ee>
Date: Mon, 22 Sep 2008 13:57:54 -0700
Subject: atmel_serial: update the powersave handler to match serial core

This problem seems to be unnoticed so far:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=b3b708fa2780cd2b5d8266a8f0c3a1cab364d4d2

has changed the serial core behavior to not to suspend the port if the
device is enabled as a wakeup source.  If the AT91 system goes to slow
clock mode, the port should be suspended always and the clocks should be
switched off.  The patch attached updates the atmel_serial driver to match
the changes in serial core.

Also, the interrupts are disabled when the clock is disabled.  If we
disable the clock with interrupts enabled, an interrupt may get stuck.  If
this is the DBGU interrupt, this blocks the OR logic at system controller
and thus all other sysc interrupts.

Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Michael Trimarchi <trimarchimichael@yahoo.it>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/atmel_serial.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 3a6da80b081..61fb8b6d19a 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -131,7 +131,8 @@ struct atmel_uart_char {
 struct atmel_uart_port {
 	struct uart_port	uart;		/* uart */
 	struct clk		*clk;		/* uart clock */
-	unsigned short		suspended;	/* is port suspended? */
+	int			may_wakeup;	/* cached value of device_may_wakeup for times we need to disable it */
+	u32			backup_imr;	/* IMR saved during suspend */
 	int			break_active;	/* break being received */
 
 	short			use_dma_rx;	/* enable PDC receiver */
@@ -984,8 +985,15 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
 		 * This is called on uart_open() or a resume event.
 		 */
 		clk_enable(atmel_port->clk);
+
+		/* re-enable interrupts if we disabled some on suspend */
+		UART_PUT_IER(port, atmel_port->backup_imr);
 		break;
 	case 3:
+		/* Back up the interrupt mask and disable all interrupts */
+		atmel_port->backup_imr = UART_GET_IMR(port);
+		UART_PUT_IDR(port, -1);
+
 		/*
 		 * Disable the peripheral clock for this serial port.
 		 * This is called on uart_close() or a suspend event.
@@ -1475,13 +1483,12 @@ static int atmel_serial_suspend(struct platform_device *pdev,
 			cpu_relax();
 	}
 
-	if (device_may_wakeup(&pdev->dev)
-	    && !atmel_serial_clk_will_stop())
-		enable_irq_wake(port->irq);
-	else {
-		uart_suspend_port(&atmel_uart, port);
-		atmel_port->suspended = 1;
-	}
+	/* we can not wake up if we're running on slow clock */
+	atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
+	if (atmel_serial_clk_will_stop())
+		device_set_wakeup_enable(&pdev->dev, 0);
+
+	uart_suspend_port(&atmel_uart, port);
 
 	return 0;
 }
@@ -1491,11 +1498,8 @@ static int atmel_serial_resume(struct platform_device *pdev)
 	struct uart_port *port = platform_get_drvdata(pdev);
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (atmel_port->suspended) {
-		uart_resume_port(&atmel_uart, port);
-		atmel_port->suspended = 0;
-	} else
-		disable_irq_wake(port->irq);
+	uart_resume_port(&atmel_uart, port);
+	device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
 
 	return 0;
 }
@@ -1513,6 +1517,8 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 	BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
 
 	port = &atmel_ports[pdev->id];
+	port->backup_imr = 0;
+
 	atmel_init_port(port, pdev);
 
 	if (!atmel_use_dma_rx(&port->uart)) {
-- 
cgit v1.2.3-70-g09d2


From 457cd4f5e3011da47f2f76e2bdc545ffcc1189db Mon Sep 17 00:00:00 2001
From: Dick Hollenbeck <dick@softplc.com>
Date: Tue, 16 Sep 2008 18:30:27 +0100
Subject: [ARM] 5250/1: unbalanced enable_irq() for serial_ks8695.c fix

The function ks8695uart_set_termios() would cause an unbalanced
enable_irq() generated message to be printk()ed. This is because
there was no book keeping support to remember if the calls to
enable_irq() and disable_irq() were balanced for the modem
control irq.

Signed-off-by: Dick Hollenbeck <dick@softplc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/serial/serial_ks8695.c | 61 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 52 insertions(+), 9 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index b9cbfc87f61..998e89dc5aa 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -63,8 +63,44 @@
 #define UART_DUMMY_LSR_RX	0x100
 #define UART_PORT_SIZE		(KS8695_USR - KS8695_URRB + 4)
 
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
+static inline int tx_enabled(struct uart_port *port)
+{
+	return port->unused[0] & 1;
+}
+
+static inline int rx_enabled(struct uart_port *port)
+{
+	return port->unused[0] & 2;
+}
+
+static inline int ms_enabled(struct uart_port *port)
+{
+	return port->unused[0] & 4;
+}
+
+static inline void ms_enable(struct uart_port *port, int enabled)
+{
+	if(enabled)
+		port->unused[0] |= 4;
+	else
+		port->unused[0] &= ~4;
+}
+
+static inline void rx_enable(struct uart_port *port, int enabled)
+{
+	if(enabled)
+		port->unused[0] |= 2;
+	else
+		port->unused[0] &= ~2;
+}
+
+static inline void tx_enable(struct uart_port *port, int enabled)
+{
+	if(enabled)
+		port->unused[0] |= 1;
+	else
+		port->unused[0] &= ~1;
+}
 
 
 #ifdef SUPPORT_SYSRQ
@@ -75,7 +111,7 @@ static void ks8695uart_stop_tx(struct uart_port *port)
 {
 	if (tx_enabled(port)) {
 		disable_irq(KS8695_IRQ_UART_TX);
-		tx_enabled(port) = 0;
+		tx_enable(port, 0);
 	}
 }
 
@@ -83,7 +119,7 @@ static void ks8695uart_start_tx(struct uart_port *port)
 {
 	if (!tx_enabled(port)) {
 		enable_irq(KS8695_IRQ_UART_TX);
-		tx_enabled(port) = 1;
+		tx_enable(port, 1);
 	}
 }
 
@@ -91,18 +127,24 @@ static void ks8695uart_stop_rx(struct uart_port *port)
 {
 	if (rx_enabled(port)) {
 		disable_irq(KS8695_IRQ_UART_RX);
-		rx_enabled(port) = 0;
+		rx_enable(port, 0);
 	}
 }
 
 static void ks8695uart_enable_ms(struct uart_port *port)
 {
-	enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+	if (!ms_enabled(port)) {
+		enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+		ms_enable(port,1);
+	}
 }
 
 static void ks8695uart_disable_ms(struct uart_port *port)
 {
-	disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+	if (ms_enabled(port)) {
+		disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
+		ms_enable(port,0);
+	}
 }
 
 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
@@ -285,8 +327,9 @@ static int ks8695uart_startup(struct uart_port *port)
 	int retval;
 
 	set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
-	tx_enabled(port) = 0;
-	rx_enabled(port) = 1;
+	tx_enable(port, 0);
+	rx_enable(port, 1);
+	ms_enable(port, 1);
 
 	/*
 	 * Allocate the IRQ
-- 
cgit v1.2.3-70-g09d2


From 41ca73229809eb3d173e316d11d3943d49924209 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 13 Oct 2008 10:31:37 +0100
Subject: drivers/serial/crisv10.c: add missing put_tty_driver

alloc_tty_driver is called at the beginning of the function containing the
lines of code shown in the patch.  Thus, put_tty_driver is needed before
returning in the error handling code.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@nr exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@

x = alloc_tty_driver@p1(...)
...
if (x == NULL) S
... when != E = x
    when != put_tty_driver(x)
    when != goto l;
(
return \(0\|x\);
|
return@p3 ...;
)

@script:python@
p1 << nr.p1;
p3 << nr.p3;
@@

print "%s: call on line %s not freed or saved before return on line %s" % (p1[0].file,p1[0].line,p3[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/crisv10.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/serial')

diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index bf94a770bb4..a467c77d8a1 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -4419,6 +4419,7 @@ rs_init(void)
 			rs485_pa_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");
+		put_tty_driver(driver);
 		return -EBUSY;
 	}
 #endif
@@ -4427,6 +4428,7 @@ rs_init(void)
 			rs485_port_g_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");
+		put_tty_driver(driver);
 		return -EBUSY;
 	}
 #endif
-- 
cgit v1.2.3-70-g09d2


From 02f11f392434656f00fdcc8c51348d52bd39afe8 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Mon, 13 Oct 2008 10:31:59 +0100
Subject: coldfire: scheduled SERIAL_COLDFIRE removal

This patch contains the scheduled removal of the obsolete
SERIAL_COLDFIRE driver.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/feature-removal-schedule.txt |    8 -
 drivers/serial/Kconfig                     |   16 +-
 drivers/serial/Makefile                    |    1 -
 drivers/serial/mcfserial.c                 | 1965 ----------------------------
 drivers/serial/mcfserial.h                 |   74 --
 5 files changed, 2 insertions(+), 2062 deletions(-)
 delete mode 100644 drivers/serial/mcfserial.c
 delete mode 100644 drivers/serial/mcfserial.h

(limited to 'drivers/serial')

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 3d2d0c29f02..cc8093c15cf 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -287,14 +287,6 @@ Who:	Glauber Costa <gcosta@redhat.com>
 
 ---------------------------
 
-What:	old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
-When:	2.6.28
-Why:	This driver still uses the old interface and has been replaced
-	by CONFIG_SERIAL_MCF.
-Who:	Sebastian Siewior <sebastian@breakpoint.cc>
-
----------------------------
-
 What:	/sys/o2cb symlink
 When:	January 2010
 Why:	/sys/fs/o2cb is the proper location for this information - /sys/o2cb
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 77cb34270fc..0db20452c79 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -994,24 +994,12 @@ config SERIAL_68328_RTS_CTS
 	bool "Support RTS/CTS on 68328 serial port"
 	depends on SERIAL_68328
 
-config SERIAL_COLDFIRE
-	bool "ColdFire serial support (DEPRECATED)"
-	depends on COLDFIRE
-	help
-	  This driver supports the built-in serial ports of the Motorola ColdFire
-	  family of CPUs.
-	  This driver is deprecated because it supports only the old interface
-	  for serial drivers and features like magic keys are not working.
-	  Please switch to the new style driver because this driver will be
-	  removed soon.
-
 config SERIAL_MCF
-	bool "Coldfire serial support (new style driver)"
+	bool "Coldfire serial support"
 	depends on COLDFIRE
 	select SERIAL_CORE
 	help
-	  This new serial driver supports the Freescale Coldfire serial ports
-	  using the new serial driver subsystem.
+	  This serial driver supports the Freescale Coldfire serial ports.
 
 config SERIAL_MCF_BAUDRATE
 	int "Default baudrate for Coldfire serial ports"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 7e7383e890d..1462eb3f7bd 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
deleted file mode 100644
index fbe3835f6b7..00000000000
--- a/drivers/serial/mcfserial.c
+++ /dev/null
@@ -1,1965 +0,0 @@
-#warning This driver is deprecated. Check Kconfig for details.
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (C) 1999-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com> 
- * Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com> 
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- *
- * Changes:
- * 08/07/2003    Daniele Bellucci <bellucda@tiscali.it>
- *               some cleanups in mcfrs_write.
- *
- */
- 
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-#include <asm/nettel.h>
-#include <asm/uaccess.h>
-#include "mcfserial.h"
-
-struct timer_list mcfrs_timer_struct;
-
-/*
- *	Default console baud rate,  we use this as the default
- *	for all ports so init can just open /dev/console and
- *	keep going.  Perhaps one day the cflag settings for the
- *	console can be used instead.
- */
-#if defined(CONFIG_HW_FEITH)
-#define	CONSOLE_BAUD_RATE	38400
-#define	DEFAULT_CBAUD		B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \
-      defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO)
-#define CONSOLE_BAUD_RATE 	115200
-#define DEFAULT_CBAUD		B115200
-#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
-      defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
-#define	CONSOLE_BAUD_RATE	19200
-#define	DEFAULT_CBAUD		B19200
-#endif
-
-#ifndef CONSOLE_BAUD_RATE
-#define	CONSOLE_BAUD_RATE	9600
-#define	DEFAULT_CBAUD		B9600
-#endif
-
-int mcfrs_console_inited = 0;
-int mcfrs_console_port = -1;
-int mcfrs_console_baud = CONSOLE_BAUD_RATE;
-int mcfrs_console_cbaud = DEFAULT_CBAUD;
-
-/*
- *	Driver data structures.
- */
-static struct tty_driver *mcfrs_serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging...
- */
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
-#define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
-#else
-#define	IRQBASE	73
-#endif
-
-/*
- *	Configuration table, UARTs to look for at startup.
- */
-static struct mcf_serial mcfrs_table[] = {
-	{  /* ttyS0 */
-		.magic = 0,
-		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
-		.irq = IRQBASE,
-		.flags = ASYNC_BOOT_AUTOCONF,
-	},
-#ifdef MCFUART_BASE2
-	{  /* ttyS1 */
-		.magic = 0,
-		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
-		.irq = IRQBASE+1,
-		.flags = ASYNC_BOOT_AUTOCONF,
-	},
-#endif
-#ifdef MCFUART_BASE3
-	{  /* ttyS2 */
-		.magic = 0,
-		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3),
-		.irq = IRQBASE+2,
-		.flags = ASYNC_BOOT_AUTOCONF,
-	},
-#endif
-#ifdef MCFUART_BASE4
-	{  /* ttyS3 */
-		.magic = 0,
-		.addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4),
-		.irq = IRQBASE+3,
-		.flags = ASYNC_BOOT_AUTOCONF,
-	},
-#endif
-};
-
-
-#define	NR_PORTS	(sizeof(mcfrs_table) / sizeof(struct mcf_serial))
-
-/*
- * This is used to figure out the divisor speeds and the timeouts.
- */
-static int mcfrs_baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
-};
-#define MCFRS_BAUD_TABLE_SIZE \
-			(sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-/*
- *	Magic system request keys. Used for debugging...
- */
-extern int	magic_sysrq_key(int ch);
-#endif
-
-
-/*
- *	Forware declarations...
- */
-static void	mcfrs_change_speed(struct mcf_serial *info);
-static void	mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-static inline int serial_paranoia_check(struct mcf_serial *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char badmagic[] =
-		"MCFRS(warning): bad magic number for serial struct %s in %s\n";
-	static const char badinfo[] =
-		"MCFRS(warning): null mcf_serial for %s in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- *	Sets or clears DTR and RTS on the requested line.
- */
-static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-	
-#if 0
-	printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
-		__FILE__, __LINE__, info, dtr, rts);
-#endif
-
-	local_irq_save(flags);
-	if (dtr >= 0) {
-#ifdef MCFPP_DTR0
-		if (info->line)
-			mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
-		else
-			mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
-#endif
-	}
-	if (rts >= 0) {
-		uartp = info->addr;
-		if (rts) {
-			info->sigs |= TIOCM_RTS;
-			uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
-		} else {
-			info->sigs &= ~TIOCM_RTS;
-			uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
-		}
-	}
-	local_irq_restore(flags);
-	return;
-}
-
-/*
- *	Gets values of serial signals.
- */
-static int mcfrs_getsignals(struct mcf_serial *info)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-	int			sigs;
-#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
-	unsigned short		ppdata;
-#endif
-
-#if 0
-	printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
-#endif
-
-	local_irq_save(flags);
-	uartp = info->addr;
-	sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
-	sigs |= (info->sigs & TIOCM_RTS);
-
-#ifdef MCFPP_DCD0
-{
-	unsigned int ppdata;
-	ppdata = mcf_getppdata();
-	if (info->line == 0) {
-		sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
-		sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
-	} else if (info->line == 1) {
-		sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
-		sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
-	}
-}
-#endif
-
-	local_irq_restore(flags);
-	return(sigs);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_stop() and mcfrs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void mcfrs_stop(struct tty_struct *tty)
-{
-	volatile unsigned char	*uartp;
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	uartp = info->addr;
-	info->imr &= ~MCFUART_UIR_TXREADY;
-	uartp[MCFUART_UIMR] = info->imr;
-	local_irq_restore(flags);
-}
-
-static void mcfrs_start(struct tty_struct *tty)
-{
-	volatile unsigned char	*uartp;
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-	
-	if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
-		return;
-
-	local_irq_save(flags);
-	if (info->xmit_cnt && info->xmit_buf) {
-		uartp = info->addr;
-		info->imr |= MCFUART_UIR_TXREADY;
-		uartp[MCFUART_UIMR] = info->imr;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * ----------------------------------------------------------------------
- *
- * Here starts the interrupt handling routines.  All of the following
- * subroutines are declared as inline and are folded into
- * mcfrs_interrupt().  They were separated out for readability's sake.
- *
- * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
- * runs with interrupts turned off.  People who may want to modify
- * mcfrs_interrupt() should try to keep the interrupt handler as fast as
- * possible.  After you are done making modifications, it is not a bad
- * idea to do:
- * 
- * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
- *
- * and look at the resulting assemble code in serial.s.
- *
- * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
- * -----------------------------------------------------------------------
- */
-
-static inline void receive_chars(struct mcf_serial *info)
-{
-	volatile unsigned char	*uartp;
-	struct tty_struct	*tty = info->port.tty;
-	unsigned char		status, ch, flag;
-
-	if (!tty)
-		return;
-
-	uartp = info->addr;
-
-	while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
-		ch = uartp[MCFUART_URB];
-		info->stats.rx++;
-
-#ifdef CONFIG_MAGIC_SYSRQ
-		if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
-			if (magic_sysrq_key(ch))
-				continue;
-		}
-#endif
-
-		flag = TTY_NORMAL;
-		if (status & MCFUART_USR_RXERR) {
-			uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
-			if (status & MCFUART_USR_RXBREAK) {
-				info->stats.rxbreak++;
-				flag = TTY_BREAK;
-			} else if (status & MCFUART_USR_RXPARITY) {
-				info->stats.rxparity++;
-				flag = TTY_PARITY;
-			} else if (status & MCFUART_USR_RXOVERRUN) {
-				info->stats.rxoverrun++;
-				flag = TTY_OVERRUN;
-			} else if (status & MCFUART_USR_RXFRAMING) {
-				info->stats.rxframing++;
-				flag = TTY_FRAME;
-			}
-		}
-		tty_insert_flip_char(tty, ch, flag);
-	}
-	tty_schedule_flip(tty);
-	return;
-}
-
-static inline void transmit_chars(struct mcf_serial *info)
-{
-	volatile unsigned char	*uartp;
-
-	uartp = info->addr;
-
-	if (info->x_char) {
-		/* Send special char - probably flow control */
-		uartp[MCFUART_UTB] = info->x_char;
-		info->x_char = 0;
-		info->stats.tx++;
-	}
-
-	if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
-		info->imr &= ~MCFUART_UIR_TXREADY;
-		uartp[MCFUART_UIMR] = info->imr;
-		return;
-	}
-
-	while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
-		uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
-		info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-		info->stats.tx++;
-		if (--info->xmit_cnt <= 0)
-			break;
-	}
-
-	if (info->xmit_cnt < WAKEUP_CHARS)
-		schedule_work(&info->tqueue);
-	return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t mcfrs_interrupt(int irq, void *dev_id)
-{
-	struct mcf_serial	*info;
-	unsigned char		isr;
-
-	info = &mcfrs_table[(irq - IRQBASE)];
-	isr = info->addr[MCFUART_UISR] & info->imr;
-
-	if (isr & MCFUART_UIR_RXREADY)
-		receive_chars(info);
-	if (isr & MCFUART_UIR_TXREADY)
-		transmit_chars(info);
-	return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static void mcfrs_offintr(struct work_struct *work)
-{
-	struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue);
-	struct tty_struct *tty = info->port.tty;
-	
-	if (tty)
-		tty_wakeup(tty);
-}
-
-
-/*
- *	Change of state on a DCD line.
- */
-void mcfrs_modem_change(struct mcf_serial *info, int dcd)
-{
-	if (info->count == 0)
-		return;
-
-	if (info->flags & ASYNC_CHECK_CD) {
-		if (dcd)
-			wake_up_interruptible(&info->open_wait);
-		else 
-			schedule_work(&info->tqueue_hangup);
-	}
-}
-
-
-#ifdef MCFPP_DCD0
-
-unsigned short	mcfrs_ppstatus;
-
-/*
- * This subroutine is called when the RS_TIMER goes off. It is used
- * to monitor the state of the DCD lines - since they have no edge
- * sensors and interrupt generators.
- */
-static void mcfrs_timer(void)
-{
-	unsigned int	ppstatus, dcdval, i;
-
-	ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-
-	if (ppstatus != mcfrs_ppstatus) {
-		for (i = 0; (i < 2); i++) {
-			dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
-			if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
-				mcfrs_modem_change(&mcfrs_table[i],
-					((ppstatus & dcdval) ? 0 : 1));
-			}
-		}
-	}
-	mcfrs_ppstatus = ppstatus;
-
-	/* Re-arm timer */
-	mcfrs_timer_struct.expires = jiffies + HZ/25;
-	add_timer(&mcfrs_timer_struct);
-}
-
-#endif	/* MCFPP_DCD0 */
-
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred. The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct mcf_serial *info = container_of(work, struct mcf_serial, tqueue_hangup);
-	struct tty_struct *tty = info->port.tty;
-	
-	if (tty)
-		tty_hangup(tty);
-}
-
-static int startup(struct mcf_serial * info)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-	
-	if (info->flags & ASYNC_INITIALIZED)
-		return 0;
-
-	if (!info->xmit_buf) {
-		info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (!info->xmit_buf)
-			return -ENOMEM;
-	}
-
-	local_irq_save(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
-#endif
-
-	/*
-	 *	Reset UART, get it into known state...
-	 */
-	uartp = info->addr;
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
-	mcfrs_setsignals(info, 1, 1);
-
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	mcfrs_change_speed(info);
-
-	/*
-	 * Lastly enable the UART transmitter and receiver, and
-	 * interrupt enables.
-	 */
-	info->imr = MCFUART_UIR_RXREADY;
-	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-	uartp[MCFUART_UIMR] = info->imr;
-
-	info->flags |= ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct mcf_serial * info)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-
-	if (!(info->flags & ASYNC_INITIALIZED))
-		return;
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("Shutting down serial port %d (irq %d)....\n", info->line,
-	       info->irq);
-#endif
-	
-	local_irq_save(flags);
-
-	uartp = info->addr;
-	uartp[MCFUART_UIMR] = 0;  /* mask all interrupts */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
-
-	if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
-		mcfrs_setsignals(info, 0, 0);
-
-	if (info->xmit_buf) {
-		free_page((unsigned long) info->xmit_buf);
-		info->xmit_buf = 0;
-	}
-
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-	
-	info->flags &= ~ASYNC_INITIALIZED;
-	local_irq_restore(flags);
-}
-
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void mcfrs_change_speed(struct mcf_serial *info)
-{
-	volatile unsigned char	*uartp;
-	unsigned int		baudclk, cflag;
-	unsigned long		flags;
-	unsigned char		mr1, mr2;
-	int			i;
-#ifdef	CONFIG_M5272
-	unsigned int		fraction;
-#endif
-
-	if (!info->port.tty || !info->port.tty->termios)
-		return;
-	cflag = info->port.tty->termios->c_cflag;
-	if (info->addr == 0)
-		return;
-
-#if 0
-	printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
-#endif
-
-	i = cflag & CBAUD;
-	if (i & CBAUDEX) {
-		i &= ~CBAUDEX;
-		if (i < 1 || i > 4)
-			info->port.tty->termios->c_cflag &= ~CBAUDEX;
-		else
-			i += 15;
-	}
-	if (i == 0) {
-		mcfrs_setsignals(info, 0, -1);
-		return;
-	}
-
-	/* compute the baudrate clock */
-#ifdef	CONFIG_M5272
-	/*
-	 * For the MCF5272, also compute the baudrate fraction.
-	 */
-	baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
-	fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
-	fraction *= 16;
-	fraction /= (32 * mcfrs_baud_table[i]);
-#else
-	baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
-#endif
-
-	info->baud = mcfrs_baud_table[i];
-
-	mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
-	mr2 = 0;
-
-	switch (cflag & CSIZE) {
-	case CS5:	mr1 |= MCFUART_MR1_CS5; break;
-	case CS6:	mr1 |= MCFUART_MR1_CS6; break;
-	case CS7:	mr1 |= MCFUART_MR1_CS7; break;
-	case CS8:
-	default:	mr1 |= MCFUART_MR1_CS8; break;
-	}
-
-	if (cflag & PARENB) {
-		if (cflag & CMSPAR) {
-			if (cflag & PARODD)
-				mr1 |= MCFUART_MR1_PARITYMARK;
-			else
-				mr1 |= MCFUART_MR1_PARITYSPACE;
-		} else {
-			if (cflag & PARODD)
-				mr1 |= MCFUART_MR1_PARITYODD;
-			else
-				mr1 |= MCFUART_MR1_PARITYEVEN;
-		}
-	} else {
-		mr1 |= MCFUART_MR1_PARITYNONE;
-	}
-
-	if (cflag & CSTOPB)
-		mr2 |= MCFUART_MR2_STOP2;
-	else
-		mr2 |= MCFUART_MR2_STOP1;
-
-	if (cflag & CRTSCTS) {
-		mr1 |= MCFUART_MR1_RXRTS;
-		mr2 |= MCFUART_MR2_TXCTS;
-	}
-
-	if (cflag & CLOCAL)
-		info->flags &= ~ASYNC_CHECK_CD;
-	else
-		info->flags |= ASYNC_CHECK_CD;
-
-	uartp = info->addr;
-
-	local_irq_save(flags);
-#if 0
-	printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
-		mr1, mr2, baudclk);
-#endif
-	/*
-	  Note: pg 12-16 of MCF5206e User's Manual states that a
-	  software reset should be performed prior to changing
-	  UMR1,2, UCSR, UACR, bit 7
-	*/
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;    /* reset RX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;    /* reset TX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;	/* reset MR pointer */
-	uartp[MCFUART_UMR] = mr1;
-	uartp[MCFUART_UMR] = mr2;
-	uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8;	/* set msb byte */
-	uartp[MCFUART_UBG2] = (baudclk & 0xff);		/* set lsb byte */
-#ifdef	CONFIG_M5272
-	uartp[MCFUART_UFPD] = (fraction & 0xf);		/* set fraction */
-#endif
-	uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
-	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-	mcfrs_setsignals(info, 1, -1);
-	local_irq_restore(flags);
-	return;
-}
-
-static void mcfrs_flush_chars(struct tty_struct *tty)
-{
-	volatile unsigned char	*uartp;
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
-		return;
-
-	uartp = (volatile unsigned char *) info->addr;
-
-	/*
-	 * re-enable receiver interrupt
-	 */
-	local_irq_save(flags);
-	if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
-	    (info->flags & ASYNC_INITIALIZED) ) {
-		info->imr |= MCFUART_UIR_RXREADY;
-		uartp[MCFUART_UIMR] = info->imr;
-	}
-	local_irq_restore(flags);
-
-	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-	    !info->xmit_buf)
-		return;
-
-	/* Enable transmitter */
-	local_irq_save(flags);
-	info->imr |= MCFUART_UIR_TXREADY;
-	uartp[MCFUART_UIMR] = info->imr;
-	local_irq_restore(flags);
-}
-
-static int mcfrs_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	volatile unsigned char	*uartp;
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-	int			c, total = 0;
-
-#if 0
-	printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
-		__FILE__, __LINE__, (int)tty, (int)buf, count);
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
-		return 0;
-
-	if (!tty || !info->xmit_buf)
-		return 0;
-	
-	local_save_flags(flags);
-	while (1) {
-		local_irq_disable();		
-		c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
-			((int)SERIAL_XMIT_SIZE) - info->xmit_head));
-		local_irq_restore(flags);
-
-		if (c <= 0)
-			break;
-
-		memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
-		local_irq_disable();
-		info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
-		info->xmit_cnt += c;
-		local_irq_restore(flags);
-
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	local_irq_disable();
-	uartp = info->addr;
-	info->imr |= MCFUART_UIR_TXREADY;
-	uartp[MCFUART_UIMR] = info->imr;
-	local_irq_restore(flags);
-
-	return total;
-}
-
-static int mcfrs_write_room(struct tty_struct *tty)
-{
-	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-	int	ret;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
-		return 0;
-	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
-}
-
-static int mcfrs_chars_in_buffer(struct tty_struct *tty)
-{
-	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
-		return 0;
-	return info->xmit_cnt;
-}
-
-static void mcfrs_flush_buffer(struct tty_struct *tty)
-{
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
-		return;
-
-	local_irq_save(flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	local_irq_restore(flags);
-
-	tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void mcfrs_throttle(struct tty_struct * tty)
-{
-	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("throttle %s: %d....\n", tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		info->x_char = STOP_CHAR(tty);
-
-	/* Turn off RTS line (do this atomic) */
-}
-
-static void mcfrs_unthrottle(struct tty_struct * tty)
-{
-	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-#ifdef SERIAL_DEBUG_THROTTLE
-	char	buf[64];
-	
-	printk("unthrottle %s: %d....\n", tty_name(tty, buf),
-	       tty->ldisc.chars_in_buffer(tty));
-#endif
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			info->x_char = START_CHAR(tty);
-	}
-
-	/* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct mcf_serial * info,
-			   struct serial_struct * retinfo)
-{
-	struct serial_struct tmp;
-  
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = (unsigned int) info->addr;
-	tmp.irq = info->irq;
-	tmp.flags = info->flags;
-	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
-	tmp.custom_divisor = info->custom_divisor;
-	return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
-}
-
-static int set_serial_info(struct mcf_serial * info,
-			   struct serial_struct * new_info)
-{
-	struct serial_struct new_serial;
-	struct mcf_serial old_info;
-	int 	retval = 0;
-
-	if (!new_info)
-		return -EFAULT;
-	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
-		return -EFAULT;
-	old_info = *info;
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((new_serial.baud_base != info->baud_base) ||
-		    (new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
-		     (info->flags & ~ASYNC_USR_MASK)))
-			return -EPERM;
-		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-			       (new_serial.flags & ASYNC_USR_MASK));
-		info->custom_divisor = new_serial.custom_divisor;
-		goto check_and_exit;
-	}
-
-	if (info->count > 1)
-		return -EBUSY;
-
-	/*
-	 * OK, past this point, all the error checking has been done.
-	 * At this point, we start making changes.....
-	 */
-
-	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~ASYNC_FLAGS) |
-			(new_serial.flags & ASYNC_FLAGS));
-	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
-	retval = startup(info);
-	return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-	unsigned char		status;
-
-	local_irq_save(flags);
-	uartp = info->addr;
-	status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
-	local_irq_restore(flags);
-
-	return put_user(status,value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(	struct mcf_serial * info, int duration)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-
-	if (!info->addr)
-		return;
-	set_current_state(TASK_INTERRUPTIBLE);
-	uartp = info->addr;
-
-	local_irq_save(flags);
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
-	schedule_timeout(duration);
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
-	local_irq_restore(flags);
-}
-
-static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
-		return -ENODEV;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	return mcfrs_getsignals(info);
-}
-
-static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
-			  unsigned int set, unsigned int clear)
-{
-	struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-	int rts = -1, dtr = -1;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
-		return -ENODEV;
-	if (tty->flags & (1 << TTY_IO_ERROR))
-		return -EIO;
-
-	if (set & TIOCM_RTS)
-		rts = 1;
-	if (set & TIOCM_DTR)
-		dtr = 1;
-	if (clear & TIOCM_RTS)
-		rts = 0;
-	if (clear & TIOCM_DTR)
-		dtr = 0;
-
-	mcfrs_setsignals(info, dtr, rts);
-
-	return 0;
-}
-
-static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
-		    unsigned int cmd, unsigned long arg)
-{
-	struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-	int retval, error;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
-		return -ENODEV;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
-	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-	
-	switch (cmd) {
-		case TCSBRK:	/* SVID version: non-zero arg --> no break */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (!arg)
-				send_break(info, HZ/4);	/* 1/4 second */
-			return 0;
-		case TCSBRKP:	/* support for POSIX tcsendbreak() */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			send_break(info, arg ? arg*(HZ/10) : HZ/4);
-			return 0;
-		case TIOCGSERIAL:
-			if (access_ok(VERIFY_WRITE, (void *) arg,
-						sizeof(struct serial_struct)))
-				return get_serial_info(info,
-					       (struct serial_struct *) arg);
-			return -EFAULT;
-		case TIOCSSERIAL:
-			return set_serial_info(info,
-					       (struct serial_struct *) arg);
-		case TIOCSERGETLSR: /* Get line status register */
-			if (access_ok(VERIFY_WRITE, (void *) arg,
-						sizeof(unsigned int)))
-				return get_lsr_info(info, (unsigned int *) arg);
-			return -EFAULT;
-		case TIOCSERGSTRUCT:
-			error = copy_to_user((struct mcf_serial *) arg,
-				    info, sizeof(struct mcf_serial));
-			if (error)
-				return -EFAULT;
-			return 0;
-			
-#ifdef TIOCSET422
-		case TIOCSET422: {
-			unsigned int val;
-			get_user(val, (unsigned int *) arg);
-			mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
-			break;
-		}
-		case TIOCGET422: {
-			unsigned int val;
-			val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
-			put_user(val, (unsigned int *) arg);
-			break;
-		}
-#endif
-
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
-}
-
-static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
-
-	if (tty->termios->c_cflag == old_termios->c_cflag)
-		return;
-
-	mcfrs_change_speed(info);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		mcfrs_setsignals(info, -1, 1);
-#if 0
-		mcfrs_start(tty);
-#endif
-	}
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void mcfrs_close(struct tty_struct *tty, struct file * filp)
-{
-	volatile unsigned char	*uartp;
-	struct mcf_serial	*info = (struct mcf_serial *)tty->driver_data;
-	unsigned long		flags;
-
-	if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
-		return;
-	
-	local_irq_save(flags);
-	
-	if (tty_hung_up_p(filp)) {
-		local_irq_restore(flags);
-		return;
-	}
-	
-#ifdef SERIAL_DEBUG_OPEN
-	printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
-#endif
-	if ((tty->count == 1) && (info->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("MCFRS: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
-	}
-	if (--info->count < 0) {
-		printk("MCFRS: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
-	}
-	if (info->count) {
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= ASYNC_CLOSING;
-
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	info->imr &= ~MCFUART_UIR_RXREADY;
-	uartp = info->addr;
-	uartp[MCFUART_UIMR] = info->imr;
-
-#if 0
-	/* FIXME: do we need to keep this enabled for console?? */
-	if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
-		/* Do not disable the UART */ ;
-	} else
-#endif
-	shutdown(info);
-	mcfrs_flush_buffer(tty);
-	tty_ldisc_flush(tty);
-	
-	tty->closing = 0;
-	info->event = 0;
-	info->port.tty = NULL;
-#if 0	
-	if (tty->ldisc.num != ldiscs[N_TTY].num) {
-		if (tty->ldisc.close)
-			(tty->ldisc.close)(tty);
-		tty->ldisc = ldiscs[N_TTY];
-		tty->termios->c_line = N_TTY;
-		if (tty->ldisc.open)
-			(tty->ldisc.open)(tty);
-	}
-#endif	
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
-}
-
-/*
- * mcfrs_wait_until_sent() --- wait until the transmitter is empty
- */
-static void
-mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-#ifdef	CONFIG_M5272
-#define	MCF5272_FIFO_SIZE	25		/* fifo size + shift reg */
-
-	struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-	volatile unsigned char *uartp;
-	unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
-
-	if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
-		return;
-
-	orig_jiffies = jiffies;
-
-	/*
-	 * Set the check interval to be 1/5 of the approximate time
-	 * to send the entire fifo, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 *
-	 * Note: we have to use pretty tight timings here to satisfy
-	 * the NIST-PCTS.
-	 */
-	lock_kernel();
-
-	fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
-	char_time = fifo_time / 5;
-	if (char_time == 0)
-		char_time = 1;
-	if (timeout && timeout < char_time)
-		char_time = timeout;
-
-	/*
-	 * Clamp the timeout period at 2 * the time to empty the
-	 * fifo.  Just to be safe, set the minimum at .5 seconds.
-	 */
-	fifo_time *= 2;
-	if (fifo_time < (HZ/2))
-		fifo_time = HZ/2;
-	if (!timeout || timeout > fifo_time)
-		timeout = fifo_time;
-
-	/*
-	 * Account for the number of bytes in the UART
-	 * transmitter FIFO plus any byte being shifted out.
-	 */
-	uartp = (volatile unsigned char *) info->addr;
-	for (;;) {
-		fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
-		if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
-				MCFUART_USR_TXEMPTY)) ==
-			MCFUART_USR_TXREADY)
-			fifo_cnt++;
-		if (fifo_cnt == 0)
-			break;
-		msleep_interruptible(jiffies_to_msecs(char_time));
-		if (signal_pending(current))
-			break;
-		if (timeout && time_after(jiffies, orig_jiffies + timeout))
-			break;
-	}
-	unlock_kernel();
-#else
-	/*
-	 * For the other coldfire models, assume all data has been sent
-	 */
-#endif
-}
-
-/*
- * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void mcfrs_hangup(struct tty_struct *tty)
-{
-	struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
-	
-	if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
-		return;
-	
-	mcfrs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * mcfrs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct mcf_serial *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int	retval;
-	int	do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & ASYNC_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & ASYNC_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-	
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ASYNC_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * mcfrs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready before block: ttyS%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	info->count--;
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		mcfrs_setsignals(info, 1, 1);
-		local_irq_enable();
-		current->state = TASK_INTERRUPTIBLE;
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & ASYNC_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & ASYNC_CLOSING) &&
-		    (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
-			break;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-#ifdef SERIAL_DEBUG_OPEN
-		printk("block_til_ready blocking: ttyS%d, count = %d\n",
-		       info->line, info->count);
-#endif
-		schedule();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("block_til_ready after blocking: ttyS%d, count = %d\n",
-	       info->line, info->count);
-#endif
-	if (retval)
-		return retval;
-	info->flags |= ASYNC_NORMAL_ACTIVE;
-	return 0;
-}	
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-int mcfrs_open(struct tty_struct *tty, struct file * filp)
-{
-	struct mcf_serial	*info;
-	int 			retval, line;
-
-	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS))
-		return -ENODEV;
-	info = mcfrs_table + line;
-	if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
-		return -ENODEV;
-#ifdef SERIAL_DEBUG_OPEN
-	printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
-#endif
-	info->count++;
-	tty->driver_data = info;
-	info->port.tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	retval = block_til_ready(tty, filp, info);
-	if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
-		printk("mcfrs_open returning after block_til_ready with %d\n",
-		       retval);
-#endif
-		return retval;
-	}
-
-#ifdef SERIAL_DEBUG_OPEN
-	printk("mcfrs_open %s successful...\n", tty->name);
-#endif
-	return 0;
-}
-
-/*
- *	Based on the line number set up the internal interrupt stuff.
- */
-static void mcfrs_irqinit(struct mcf_serial *info)
-{
-#if defined(CONFIG_M5272)
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*portp;
-	volatile unsigned char	*uartp;
-
-	uartp = info->addr;
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
-
-	switch (info->line) {
-	case 0:
-		*icrp = 0xe0000000;
-		break;
-	case 1:
-		*icrp = 0x0e000000;
-		break;
-	default:
-		printk("MCFRS: don't know how to handle UART %d interrupt?\n",
-			info->line);
-		return;
-	}
-
-	/* Enable the output lines for the serial ports */
-	portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
-	*portp = (*portp & ~0x000000ff) | 0x00000055;
-	portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
-	*portp = (*portp & ~0x000003fc) | 0x000002a8;
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-	volatile unsigned char *icrp, *uartp;
-	volatile unsigned long *imrp;
-
-	uartp = info->addr;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
-		MCFINTC_ICR0 + MCFINT_UART0 + info->line);
-	*icrp = 0x30 + info->line; /* level 6, line based priority */
-
-	imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
-		MCFINTC_IMRL);
-	*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-#if defined(CONFIG_M527x)
-	{
-		/*
-		 * External Pin Mask Setting & Enable External Pin for Interface
-		 * mrcbis@aliceposta.it
-        	 */
-		u16 *serpin_enable_mask;
-		serpin_enable_mask = (u16 *) (MCF_IPSBAR + MCF_GPIO_PAR_UART);
-		if (info->line == 0)
-			*serpin_enable_mask |= UART0_ENABLE_MASK;
-		else if (info->line == 1)
-			*serpin_enable_mask |= UART1_ENABLE_MASK;
-		else if (info->line == 2)
-			*serpin_enable_mask |= UART2_ENABLE_MASK;
-	}
-#endif
-#if defined(CONFIG_M528x)
-	/* make sure PUAPAR is set for UART0 and UART1 */
-	if (info->line < 2) {
-		volatile unsigned char *portp = (volatile unsigned char *) (MCF_MBAR + MCF5282_GPIO_PUAPAR);
-		*portp |= (0x03 << (info->line * 2));
-	}
-#endif
-#elif defined(CONFIG_M520x)
-	volatile unsigned char *icrp, *uartp;
-	volatile unsigned long *imrp;
-
-	uartp = info->addr;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
-		MCFINTC_ICR0 + MCFINT_UART0 + info->line);
-	*icrp = 0x03;
-
-	imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
-		MCFINTC_IMRL);
-	*imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
-	if (info->line < 2) {
-		unsigned short *uart_par;
-		uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART);
-		if (info->line == 0)
-			*uart_par |=  MCF_GPIO_PAR_UART_PAR_UTXD0
-				  | MCF_GPIO_PAR_UART_PAR_URXD0;
-		else if (info->line == 1)
-			*uart_par |=  MCF_GPIO_PAR_UART_PAR_UTXD1
-				  | MCF_GPIO_PAR_UART_PAR_URXD1;
-		} else if (info->line == 2) {
-			unsigned char *feci2c_par;
-			feci2c_par = (unsigned char *)(MCF_IPSBAR +  MCF_GPIO_PAR_FECI2C);
-			*feci2c_par &= ~0x0F;
-			*feci2c_par |=  MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
-				    | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
-		}
-#elif defined(CONFIG_M532x)
-	volatile unsigned char *uartp;
-	uartp = info->addr;
-	switch (info->line) {
-	case 0:
-		MCF_INTC0_ICR26 = 0x3;
-		MCF_INTC0_CIMR = 26;
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x000F;
-		break;
-	case 1:
-		MCF_INTC0_ICR27 = 0x3;
-		MCF_INTC0_CIMR = 27;
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x0FF0;
-		break;
-	case 2:
-		MCF_INTC0_ICR28 = 0x3;
-		MCF_INTC0_CIMR = 28;
-		/* GPIOs also must be initalized, depends on board */
-		break;
-	}
-#else
-	volatile unsigned char	*icrp, *uartp;
-
-	switch (info->line) {
-	case 0:
-		icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
-		*icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
-			MCFSIM_ICR_PRI1;
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
-		break;
-	case 1:
-		icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
-		*icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
-			MCFSIM_ICR_PRI2;
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
-		break;
-	default:
-		printk("MCFRS: don't know how to handle UART %d interrupt?\n",
-			info->line);
-		return;
-	}
-
-	uartp = info->addr;
-	uartp[MCFUART_UIVR] = info->irq;
-#endif
-
-	/* Clear mask, so no surprise interrupts. */
-	uartp[MCFUART_UIMR] = 0;
-
-	if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
-	    "ColdFire UART", NULL)) {
-		printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
-			"vector=%d\n", info->line, info->irq);
-	}
-
-	return;
-}
-
-
-char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
-
-
-/*
- * Serial stats reporting...
- */
-int mcfrs_readproc(char *page, char **start, off_t off, int count,
-		         int *eof, void *data)
-{
-	struct mcf_serial	*info;
-	char			str[20];
-	int			len, sigs, i;
-
-	len = sprintf(page, mcfrs_drivername);
-	for (i = 0; (i < NR_PORTS); i++) {
-		info = &mcfrs_table[i];
-		len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
-			i, (unsigned int) info->addr, info->irq, info->baud);
-		if (info->stats.rx || info->stats.tx)
-			len += sprintf((page + len), "tx:%d rx:%d ",
-			info->stats.tx, info->stats.rx);
-		if (info->stats.rxframing)
-			len += sprintf((page + len), "fe:%d ",
-			info->stats.rxframing);
-		if (info->stats.rxparity)
-			len += sprintf((page + len), "pe:%d ",
-			info->stats.rxparity);
-		if (info->stats.rxbreak)
-			len += sprintf((page + len), "brk:%d ",
-			info->stats.rxbreak);
-		if (info->stats.rxoverrun)
-			len += sprintf((page + len), "oe:%d ",
-			info->stats.rxoverrun);
-
-		str[0] = str[1] = 0;
-		if ((sigs = mcfrs_getsignals(info))) {
-			if (sigs & TIOCM_RTS)
-				strcat(str, "|RTS");
-			if (sigs & TIOCM_CTS)
-				strcat(str, "|CTS");
-			if (sigs & TIOCM_DTR)
-				strcat(str, "|DTR");
-			if (sigs & TIOCM_CD)
-				strcat(str, "|CD");
-		}
-
-		len += sprintf((page + len), "%s\n", &str[1]);
-	}
-
-	return(len);
-}
-
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
-	printk(mcfrs_drivername);
-}
-
-static const struct tty_operations mcfrs_ops = {
-	.open = mcfrs_open,
-	.close = mcfrs_close,
-	.write = mcfrs_write,
-	.flush_chars = mcfrs_flush_chars,
-	.write_room = mcfrs_write_room,
-	.chars_in_buffer = mcfrs_chars_in_buffer,
-	.flush_buffer = mcfrs_flush_buffer,
-	.ioctl = mcfrs_ioctl,
-	.throttle = mcfrs_throttle,
-	.unthrottle = mcfrs_unthrottle,
-	.set_termios = mcfrs_set_termios,
-	.stop = mcfrs_stop,
-	.start = mcfrs_start,
-	.hangup = mcfrs_hangup,
-	.read_proc = mcfrs_readproc,
-	.wait_until_sent = mcfrs_wait_until_sent,
- 	.tiocmget = mcfrs_tiocmget,
-	.tiocmset = mcfrs_tiocmset,
-};
-
-/* mcfrs_init inits the driver */
-static int __init
-mcfrs_init(void)
-{
-	struct mcf_serial	*info;
-	unsigned long		flags;
-	int			i;
-
-	/* Setup base handler, and timer table. */
-#ifdef MCFPP_DCD0
-	init_timer(&mcfrs_timer_struct);
-	mcfrs_timer_struct.function = mcfrs_timer;
-	mcfrs_timer_struct.data = 0;
-	mcfrs_timer_struct.expires = jiffies + HZ/25;
-	add_timer(&mcfrs_timer_struct);
-	mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
-#endif
-	mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!mcfrs_serial_driver)
-		return -ENOMEM;
-
-	show_serial_version();
-
-	/* Initialize the tty_driver structure */
-	mcfrs_serial_driver->owner = THIS_MODULE;
-	mcfrs_serial_driver->name = "ttyS";
-	mcfrs_serial_driver->driver_name = "mcfserial";
-	mcfrs_serial_driver->major = TTY_MAJOR;
-	mcfrs_serial_driver->minor_start = 64;
-	mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	mcfrs_serial_driver->init_termios = tty_std_termios;
-
-	mcfrs_serial_driver->init_termios.c_cflag =
-		mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
-	mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
-
-	tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
-
-	if (tty_register_driver(mcfrs_serial_driver)) {
-		printk("MCFRS: Couldn't register serial driver\n");
-		put_tty_driver(mcfrs_serial_driver);
-		return(-EBUSY);
-	}
-
-	local_irq_save(flags);
-
-	/*
-	 *	Configure all the attached serial ports.
-	 */
-	for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
-		info->magic = SERIAL_MAGIC;
-		info->line = i;
-		info->port.tty = NULL;
-		info->custom_divisor = 16;
-		info->close_delay = 50;
-		info->closing_wait = 3000;
-		info->x_char = 0;
-		info->event = 0;
-		info->count = 0;
-		info->blocked_open = 0;
-		INIT_WORK(&info->tqueue, mcfrs_offintr);
-		INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
-		init_waitqueue_head(&info->open_wait);
-		init_waitqueue_head(&info->close_wait);
-
-		info->imr = 0;
-		mcfrs_setsignals(info, 0, 0);
-		mcfrs_irqinit(info);
-
-		printk("ttyS%d at 0x%04x (irq = %d)", info->line,
-			(unsigned int) info->addr, info->irq);
-		printk(" is a builtin ColdFire UART\n");
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-module_init(mcfrs_init);
-
-/****************************************************************************/
-/*                          Serial Console                                  */
-/****************************************************************************/
-
-/*
- *	Quick and dirty UART initialization, for console output.
- */
-
-void mcfrs_init_console(void)
-{
-	volatile unsigned char	*uartp;
-	unsigned int		clk;
-
-	/*
-	 *	Reset UART, get it into known state...
-	 */
-	uartp = (volatile unsigned char *) (MCF_MBAR +
-		(mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;  /* reset MR pointer */
-
-	/*
-	 * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
-	 */
-	uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
-	uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
-
-#ifdef	CONFIG_M5272
-{
-	/*
-	 * For the MCF5272, also compute the baudrate fraction.
-	 */
-	int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud);
-	fraction *= 16;
-	fraction /= (32 * mcfrs_console_baud);
-	uartp[MCFUART_UFPD] = (fraction & 0xf);		/* set fraction */
-	clk = (MCF_BUSCLK / mcfrs_console_baud) / 32;
-}
-#else
-	clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
-#endif
-
-	uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8;  /* set msb baud */
-	uartp[MCFUART_UBG2] = (clk & 0xff);  /* set lsb baud */
-	uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
-	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
-
-	mcfrs_console_inited++;
-	return;
-}
-
-
-/*
- *	Setup for console. Argument comes from the boot command line.
- */
-
-int mcfrs_console_setup(struct console *cp, char *arg)
-{
-	int		i, n = CONSOLE_BAUD_RATE;
-
-	if (!cp)
-		return(-1);
-
-	if (!strncmp(cp->name, "ttyS", 4))
-		mcfrs_console_port = cp->index;
-	else if (!strncmp(cp->name, "cua", 3))
-		mcfrs_console_port = cp->index;
-	else
-		return(-1);
-
-	if (arg)
-		n = simple_strtoul(arg,NULL,0);
-	for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
-		if (mcfrs_baud_table[i] == n)
-			break;
-	if (i < MCFRS_BAUD_TABLE_SIZE) {
-		mcfrs_console_baud = n;
-		mcfrs_console_cbaud = 0;
-		if (i > 15) {
-			mcfrs_console_cbaud |= CBAUDEX;
-			i -= 15;
-		}
-		mcfrs_console_cbaud |= i;
-	}
-	mcfrs_init_console(); /* make sure baud rate changes */
-	return(0);
-}
-
-
-static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return mcfrs_serial_driver;
-}
-
-
-/*
- *	Output a single character, using UART polled mode.
- *	This is used for console output.
- */
-
-int mcfrs_put_char(char ch)
-{
-	volatile unsigned char	*uartp;
-	unsigned long		flags;
-	int			i;
-
-	uartp = (volatile unsigned char *) (MCF_MBAR +
-		(mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
-
-	local_irq_save(flags);
-	for (i = 0; (i < 0x10000); i++) {
-		if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
-			break;
-	}
-	if (i < 0x10000) {
-		uartp[MCFUART_UTB] = ch;
-		for (i = 0; (i < 0x10000); i++)
-			if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
-				break;
-	}
-	if (i >= 0x10000)
-		mcfrs_init_console(); /* try and get it back */
-	local_irq_restore(flags);
-
-	return 1;
-}
-
-
-/*
- * rs_console_write is registered for printk output.
- */
-
-void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
-{
-	if (!mcfrs_console_inited)
-		mcfrs_init_console();
-	while (len-- > 0) {
-		if (*p == '\n')
-			mcfrs_put_char('\r');
-		mcfrs_put_char(*p++);
-	}
-}
-
-/*
- * declare our consoles
- */
-
-struct console mcfrs_console = {
-	.name		= "ttyS",
-	.write		= mcfrs_console_write,
-	.device		= mcfrs_console_device,
-	.setup		= mcfrs_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-
-static int __init mcfrs_console_init(void)
-{
-	register_console(&mcfrs_console);
-	return 0;
-}
-
-console_initcall(mcfrs_console_init);
-
-/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
deleted file mode 100644
index 56420e2cb11..00000000000
--- a/drivers/serial/mcfserial.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * mcfserial.c -- serial driver for ColdFire internal UARTS.
- *
- * Copyright (c) 1999 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
- * Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
- *
- * Based on code from 68332serial.c which was:
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1998 TSHG
- * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
- */ 
-#ifndef _MCF_SERIAL_H
-#define _MCF_SERIAL_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/*
- *	Define a local serial stats structure.
- */
-
-struct mcf_stats {
-	unsigned int	rx;
-	unsigned int	tx;
-	unsigned int	rxbreak;
-	unsigned int	rxframing;
-	unsigned int	rxparity;
-	unsigned int	rxoverrun;
-};
-
-
-/*
- * This is our internal structure for each serial port's state.
- * Each serial port has one of these structures associated with it.
- */
-
-struct mcf_serial {
-	int			magic;
-	volatile unsigned char	*addr;		/* UART memory address */
-	int			irq;
-	int			flags; 		/* defined in tty.h */
-	int			type; 		/* UART type */
-	struct tty_struct 	*tty;
-	unsigned char		imr;		/* Software imr register */
-	unsigned int		baud;
-	int			sigs;
-	int			custom_divisor;
-	int			x_char;	/* xon/xoff character */
-	int			baud_base;
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	int			line;
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	struct mcf_stats	stats;
-	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _MCF_SERIAL_H */
-- 
cgit v1.2.3-70-g09d2


From c111340002278c0425841b19477a1fd290a6f532 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 13 Oct 2008 10:32:35 +0100
Subject: Blackfin Serial Driver: use __initdata for data, not __init

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a0d30bed9f..4a023c65e9f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1056,7 +1056,7 @@ static __init void early_serial_write(struct console *con, const char *s,
 	}
 }
 
-static struct __init console bfin_early_serial_console = {
+static struct __initdata console bfin_early_serial_console = {
 	.name = "early_BFuart",
 	.write = early_serial_write,
 	.device = uart_console_device,
-- 
cgit v1.2.3-70-g09d2


From ccfbc3e1c860cce62e0b1c6c291647ecfe9ef296 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 13 Oct 2008 10:32:44 +0100
Subject: Blackfin Serial Driver: Fix bug - should suspend/resume/remove all
 uart ports.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 39 ++++++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 17 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 4a023c65e9f..04eeef05e93 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1100,20 +1100,26 @@ static struct uart_driver bfin_serial_reg = {
 
 static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct bfin_serial_port *uart = platform_get_drvdata(dev);
+	int i;
 
-	if (uart)
-		uart_suspend_port(&bfin_serial_reg, &uart->port);
+	for (i = 0; i < nr_ports; i++) {
+		if (bfin_serial_ports[i].port.dev != &dev->dev)
+			continue;
+		uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+	}
 
 	return 0;
 }
 
 static int bfin_serial_resume(struct platform_device *dev)
 {
-	struct bfin_serial_port *uart = platform_get_drvdata(dev);
+	int i;
 
-	if (uart)
-		uart_resume_port(&bfin_serial_reg, &uart->port);
+	for (i = 0; i < nr_ports; i++) {
+		if (bfin_serial_ports[i].port.dev != &dev->dev)
+			continue;
+		uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+	}
 
 	return 0;
 }
@@ -1133,27 +1139,26 @@ static int bfin_serial_probe(struct platform_device *dev)
 				continue;
 			bfin_serial_ports[i].port.dev = &dev->dev;
 			uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
-			platform_set_drvdata(dev, &bfin_serial_ports[i]);
 		}
 	}
 
 	return 0;
 }
 
-static int bfin_serial_remove(struct platform_device *pdev)
+static int bfin_serial_remove(struct platform_device *dev)
 {
-	struct bfin_serial_port *uart = platform_get_drvdata(pdev);
-
+	int i;
 
+	for (i = 0; i < nr_ports; i++) {
+		if (bfin_serial_ports[i].port.dev != &dev->dev)
+			continue;
+		uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
+		bfin_serial_ports[i].port.dev = NULL;
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	gpio_free(uart->cts_pin);
-	gpio_free(uart->rts_pin);
+		gpio_free(bfin_serial_ports[i].cts_pin);
+		gpio_free(bfin_serial_ports[i].rts_pin);
 #endif
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (uart)
-		uart_remove_one_port(&bfin_serial_reg, &uart->port);
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From d273e201717af57ae56299ef1e6e2f7a1f812020 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 13 Oct 2008 10:33:06 +0100
Subject: Blackfin Serial Driver: trim trailing whitespace -- no functional
 changes

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 04eeef05e93..976de91307c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1,7 +1,7 @@
 /*
  * Blackfin On-Chip Serial Driver
  *
- * Copyright 2006-2007 Analog Devices Inc.
+ * Copyright 2006-2008 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -126,13 +126,13 @@ static int kgdb_entry_state;
 void kgdb_put_debug_char(int chr)
 {
 	struct bfin_serial_port *uart;
-	
+
 	if (CONFIG_KGDB_UART_PORT < 0
 		|| CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
 		uart = &bfin_serial_ports[0];
 	else
 		uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-	
+
 	while (!(UART_GET_LSR(uart) & THRE)) {
 		SSYNC();
 	}
@@ -152,7 +152,7 @@ int kgdb_get_debug_char(void)
 		uart = &bfin_serial_ports[0];
 	else
 		uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
-	
+
 	while(!(UART_GET_LSR(uart) & DR)) {
 		SSYNC();
 	}
-- 
cgit v1.2.3-70-g09d2


From c9607ecc6ee50445e4d6bd3165f372a0f20f91ce Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 13 Oct 2008 10:33:16 +0100
Subject: Blackfin Serial Driver: move common variables out of serial headers
 and into the serial driver

move common variables out of serial headers and into the serial driver and
rename "nr_ports" to "nr_active_ports" so as to easily differentiate
between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h |  3 ---
 arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h |  2 --
 arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h |  3 ---
 arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h |  3 ---
 arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h |  2 --
 drivers/serial/bfin_5xx.c                               | 17 ++++++++++-------
 6 files changed, 10 insertions(+), 20 deletions(-)

(limited to 'drivers/serial')

diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 2526b6ed6fa..a23d0475081 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long uart_base_addr;
 	int uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index ebf592b59aa..20471cd5ebf 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 #define DRIVER_NAME "bfin-uart"
 
-int nr_ports = BFIN_UART_NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 1bf56ffa22f..08dfe30300b 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -119,7 +119,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -164,8 +163,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 5e29446a8e0..76976b17b53 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -105,7 +105,6 @@ struct bfin_serial_port {
 #endif
 };
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -170,8 +169,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 #endif
 };
 
-int nr_ports = ARRAY_SIZE(bfin_serial_resource);
-
 #define DRIVER_NAME "bfin-uart"
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 8aa02780e64..6cddca4aa18 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -111,7 +111,6 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
 	bfin_write16(uart->port.membase + OFFSET_LSR, -1);
 }
 
-struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
 struct bfin_serial_res {
 	unsigned long	uart_base_addr;
 	int		uart_irq;
@@ -142,7 +141,6 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 #define DRIVER_NAME "bfin-uart"
 
-int nr_ports = BFIN_UART_NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 976de91307c..382fb8d728d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,9 @@
 #define BFIN_SERIAL_MAJOR	204
 #define BFIN_SERIAL_MINOR	64
 
+static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS];
+static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource);
+
 /*
  * Setup for console. Argument comes from the menuconfig
  */
@@ -859,7 +862,7 @@ static void __init bfin_serial_init_ports(void)
 		return;
 	first = 0;
 
-	for (i = 0; i < nr_ports; i++) {
+	for (i = 0; i < nr_active_ports; i++) {
 		bfin_serial_ports[i].port.uartclk   = get_sclk();
 		bfin_serial_ports[i].port.ops       = &bfin_serial_pops;
 		bfin_serial_ports[i].port.line      = i;
@@ -961,7 +964,7 @@ bfin_serial_console_setup(struct console *co, char *options)
 	 * if so, search for the first available port that does have
 	 * console support.
 	 */
-	if (co->index == -1 || co->index >= nr_ports)
+	if (co->index == -1 || co->index >= nr_active_ports)
 		co->index = 0;
 	uart = &bfin_serial_ports[co->index];
 
@@ -1072,7 +1075,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
 	struct bfin_serial_port *uart;
 	struct ktermios t;
 
-	if (port == -1 || port >= nr_ports)
+	if (port == -1 || port >= nr_active_ports)
 		port = 0;
 	bfin_serial_init_ports();
 	bfin_early_serial_console.index = port;
@@ -1102,7 +1105,7 @@ static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state)
 {
 	int i;
 
-	for (i = 0; i < nr_ports; i++) {
+	for (i = 0; i < nr_active_ports; i++) {
 		if (bfin_serial_ports[i].port.dev != &dev->dev)
 			continue;
 		uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1115,7 +1118,7 @@ static int bfin_serial_resume(struct platform_device *dev)
 {
 	int i;
 
-	for (i = 0; i < nr_ports; i++) {
+	for (i = 0; i < nr_active_ports; i++) {
 		if (bfin_serial_ports[i].port.dev != &dev->dev)
 			continue;
 		uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
@@ -1134,7 +1137,7 @@ static int bfin_serial_probe(struct platform_device *dev)
 			break;
 
 	if (i < dev->num_resources) {
-		for (i = 0; i < nr_ports; i++, res++) {
+		for (i = 0; i < nr_active_ports; i++, res++) {
 			if (bfin_serial_ports[i].port.mapbase != res->start)
 				continue;
 			bfin_serial_ports[i].port.dev = &dev->dev;
@@ -1149,7 +1152,7 @@ static int bfin_serial_remove(struct platform_device *dev)
 {
 	int i;
 
-	for (i = 0; i < nr_ports; i++) {
+	for (i = 0; i < nr_active_ports; i++) {
 		if (bfin_serial_ports[i].port.dev != &dev->dev)
 			continue;
 		uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port);
-- 
cgit v1.2.3-70-g09d2


From 08668ab7c2ca9bed281eb6763e5a8e15384b7fdc Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 13 Oct 2008 10:33:25 +0100
Subject: Blackfin Serial Driver: Remove useless stop

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 382fb8d728d..8d2d7570668 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -320,9 +320,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&uart->port);
-
-	if (uart_circ_empty(xmit))
-		bfin_serial_stop_tx(&uart->port);
 }
 
 static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
-- 
cgit v1.2.3-70-g09d2


From 5ffdeea2f99ed9d46bf954c9fdc64da7da57e81b Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 13 Oct 2008 10:33:33 +0100
Subject: Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.

Disable irq and return immediately.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/bfin_5xx.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 8d2d7570668..5e20f50342a 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -301,7 +301,11 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 	bfin_serial_mctrl_check(uart);
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
-		bfin_serial_stop_tx(&uart->port);
+#ifdef CONFIG_BF54x
+		/* Clear TFI bit */
+		UART_PUT_LSR(uart, TFI);
+#endif
+		UART_CLEAR_IER(uart, ETBEI);
 		return;
 	}
 
-- 
cgit v1.2.3-70-g09d2


From b3ef5aba64aed5be0fccca3ff39c8f2282111ce5 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Mon, 13 Oct 2008 10:33:42 +0100
Subject: Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin
 UART

We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework
to monitor the TX status.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 3 +++
 arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 ++
 arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 3 +++
 arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h | 3 +++
 arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 ++
 drivers/serial/bfin_5xx.c                               | 4 ++++
 6 files changed, 17 insertions(+)

(limited to 'drivers/serial')

diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a23d0475081..75722d6008b 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 20471cd5ebf..815bfe5dd1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
 # endif
 #endif
 
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index 08dfe30300b..b3f87e1d16a 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -78,6 +78,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index 76976b17b53..e4cf35e7ab9 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -82,6 +82,9 @@
 #  define CONFIG_UART1_RTS_PIN -1
 # endif
 #endif
+
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 /*
  * The pin configuration is different from schematic
  */
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 6cddca4aa18..e0ce0c1843d 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -69,6 +69,8 @@
 # endif
 #endif
 
+#define BFIN_UART_TX_FIFO_SIZE	2
+
 struct bfin_serial_port {
         struct uart_port        port;
         unsigned int            old_status;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 5e20f50342a..a5cf0e70b3f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -761,6 +761,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	val |= UCEN;
 	UART_PUT_GCTL(uart, val);
 
+	/* Port speed changed, update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
 	spin_unlock_irqrestore(&uart->port.lock, flags);
 }
 
@@ -865,6 +868,7 @@ static void __init bfin_serial_init_ports(void)
 
 	for (i = 0; i < nr_active_ports; i++) {
 		bfin_serial_ports[i].port.uartclk   = get_sclk();
+		bfin_serial_ports[i].port.fifosize  = BFIN_UART_TX_FIFO_SIZE;
 		bfin_serial_ports[i].port.ops       = &bfin_serial_pops;
 		bfin_serial_ports[i].port.line      = i;
 		bfin_serial_ports[i].port.iotype    = UPIO_MEM;
-- 
cgit v1.2.3-70-g09d2


From ab2375f2fe256358a982e357d298801cf1adbd00 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 13 Oct 2008 10:33:51 +0100
Subject: Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped
 interrupts in PIO mode

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/kernel/bfin_dma_5xx.c | 13 +++++-----
 drivers/serial/bfin_5xx.c           | 50 +++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 7 deletions(-)

(limited to 'drivers/serial')

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 93229b3d6e3..339293d677c 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -117,15 +117,14 @@ int request_dma(unsigned int channel, char *device_id)
 
 #ifdef CONFIG_BF54x
 	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
-		if (strncmp(device_id, "BFIN_UART", 9) == 0) {
-			dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-			dma_ch[channel].regs->peripheral_map |=
+		unsigned int per_map;
+		per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
+		if (strncmp(device_id, "BFIN_UART", 9) == 0)
+			dma_ch[channel].regs->peripheral_map = per_map |
 				((channel - CH_UART2_RX + 0xC)<<12);
-		} else {
-			dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-			dma_ch[channel].regs->peripheral_map |=
+		else
+			dma_ch[channel].regs->peripheral_map = per_map |
 				((channel - CH_UART2_RX + 0x6)<<12);
-		}
 	}
 #endif
 
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a5cf0e70b3f..569f0e2476c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -649,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port)
 		free_irq(uart->port.irq, uart);
 		return -EBUSY;
 	}
+
+# ifdef CONFIG_BF54x
+	{
+		unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+		switch (uart->port.irq) {
+		case IRQ_UART3_RX:
+			uart_dma_ch_rx = CH_UART3_RX;
+			uart_dma_ch_tx = CH_UART3_TX;
+			break;
+		case IRQ_UART2_RX:
+			uart_dma_ch_rx = CH_UART2_RX;
+			uart_dma_ch_tx = CH_UART2_TX;
+			break;
+		default:
+			uart_dma_ch_rx = uart_dma_ch_tx = 0;
+			break;
+		};
+
+		if (uart_dma_ch_rx &&
+			request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+			printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+			free_irq(uart->port.irq, uart);
+			free_irq(uart->port.irq + 1, uart);
+			return -EBUSY;
+		}
+		if (uart_dma_ch_tx &&
+			request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+			printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+			free_dma(uart_dma_ch_rx);
+			free_irq(uart->port.irq, uart);
+			free_irq(uart->port.irq + 1, uart);
+			return -EBUSY;
+		}
+	}
+# endif
 #endif
 	UART_SET_IER(uart, ERBFI);
 	return 0;
@@ -666,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port)
 	del_timer(&(uart->rx_dma_timer));
 	dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
 #else
+#ifdef CONFIG_BF54x
+	switch (uart->port.irq) {
+	case IRQ_UART3_RX:
+		free_dma(CH_UART3_RX);
+		free_dma(CH_UART3_TX);
+		break;
+	case IRQ_UART2_RX:
+		free_dma(CH_UART2_RX);
+		free_dma(CH_UART2_TX);
+		break;
+	default:
+		break;
+	};
+#endif
 #ifdef	CONFIG_KGDB_UART
 	if (uart->port.line != CONFIG_KGDB_UART_PORT)
 #endif
-- 
cgit v1.2.3-70-g09d2


From 9bde10a4b8c54804236d3d6b4b75e98825a921e7 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 13 Oct 2008 10:35:42 +0100
Subject: serial-make-uart_ports-ioport-unsigned-long-fix

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/serial_core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index f977c98cfa9..308588e2072 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2154,12 +2154,11 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 
 	switch (port->iotype) {
 	case UPIO_PORT:
-		snprintf(address, sizeof(address),
-			 "I/O 0x%x", port->iobase);
+		snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase);
 		break;
 	case UPIO_HUB6:
 		snprintf(address, sizeof(address),
-			 "I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+			 "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
 		break;
 	case UPIO_MEM:
 	case UPIO_MEM32:
-- 
cgit v1.2.3-70-g09d2


From 40836c484c31301998a14be0439cc4e856399843 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 13 Oct 2008 10:36:11 +0100
Subject: serial_8250: pci_enable_device fail is not fully handled

<rmk> talking about leaks - I noticed that the 'check return of
pci_enable_dev()' in the 8250 pci resume function finally made it in
despite my objections against it (causing stuff in higher levels to
leak).

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c2f23933155..c014ffb110e 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2041,9 +2041,9 @@ static int pciserial_resume_one(struct pci_dev *dev)
 		 * The device may have been disabled.  Re-enable it.
 		 */
 		err = pci_enable_device(dev);
+		/* FIXME: We cannot simply error out here */
 		if (err)
-			return err;
-
+			printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
 		pciserial_resume_ports(priv);
 	}
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From b5d674abcffeacaf83038bbf7c0caf24edd497dd Mon Sep 17 00:00:00 2001
From: Will Newton <will.newton@gmail.com>
Date: Mon, 13 Oct 2008 10:36:21 +0100
Subject: 8250: remove a few inlines of dubious value

Remove some inlines from various functions that are called once, are too
big to inline, or are called only from slow path code.  This saves around
300 bytes of code for me.

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 9ccc563d873..ed593c4b6e7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -536,7 +536,7 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
 /*
  * FIFO support.
  */
-static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+static void serial8250_clear_fifos(struct uart_8250_port *p)
 {
 	if (p->capabilities & UART_CAP_FIFO) {
 		serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -551,7 +551,7 @@ static inline void serial8250_clear_fifos(struct uart_8250_port *p)
  * capability" bit enabled.  Note that on XR16C850s, we need to
  * reset LCR to write to IER.
  */
-static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 {
 	if (p->capabilities & UART_CAP_SLEEP) {
 		if (p->capabilities & UART_CAP_EFR) {
@@ -1424,8 +1424,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 /*
  * This handles the interrupt from one port.
  */
-static inline void
-serial8250_handle_port(struct uart_8250_port *up)
+static void serial8250_handle_port(struct uart_8250_port *up)
 {
 	unsigned int status;
 	unsigned long flags;
@@ -1719,7 +1718,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state)
 /*
  *	Wait for transmitter & holding register to empty
  */
-static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 {
 	unsigned int status, tmout = 10000;
 
-- 
cgit v1.2.3-70-g09d2


From b70ac7718579b5cbf3bdd74fd01132d1c91596f4 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Mon, 13 Oct 2008 10:36:31 +0100
Subject: serial: allow 8250 to be used on sparc

This requires three changes:

1) Remove !SPARC restriction in Kconfig.

2) Move Sparc specific serial drivers before 8250, so that serial
   console devices don't change names on us, even if 8250 finds
   devices.

3) Since the Sparc specific serial drivers try to use the
   same major/minor device namespace as 8250, some coordination
   is necessary.  Use the sunserial_*() layer routines to allocate
   minor number space within TTY_MAJOR when CONFIG_SPARC.

   This has no effect on other platforms.

Thanks to Josip Rodin for bringing up this issue and testing
plus debugging various revisions of this patch.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/include/asm/serial.h |  6 ++++++
 drivers/serial/8250.c           | 21 +++++++++++++++++----
 drivers/serial/Kconfig          |  1 -
 drivers/serial/Makefile         | 15 ++++++++++-----
 4 files changed, 33 insertions(+), 10 deletions(-)
 create mode 100644 arch/sparc/include/asm/serial.h

(limited to 'drivers/serial')

diff --git a/arch/sparc/include/asm/serial.h b/arch/sparc/include/asm/serial.h
new file mode 100644
index 00000000000..f90d61c2805
--- /dev/null
+++ b/arch/sparc/include/asm/serial.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_SERIAL_H
+#define __SPARC_SERIAL_H
+
+#define BASE_BAUD ( 1843200 / 16 )
+
+#endif /* __SPARC_SERIAL_H */
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index ed593c4b6e7..db2cdc103c8 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -44,6 +44,10 @@
 
 #include "8250.h"
 
+#ifdef CONFIG_SPARC
+#include "suncore.h"
+#endif
+
 /*
  * Configuration:
  *   share_irqs - whether we pass IRQF_SHARED to request_irq().  This option
@@ -2676,7 +2680,6 @@ static struct uart_driver serial8250_reg = {
 	.dev_name		= "ttyS",
 	.major			= TTY_MAJOR,
 	.minor			= 64,
-	.nr			= UART_NR,
 	.cons			= SERIAL8250_CONSOLE,
 };
 
@@ -2958,10 +2961,12 @@ static int __init serial8250_init(void)
 		"%d ports, IRQ sharing %sabled\n", nr_uarts,
 		share_irqs ? "en" : "dis");
 
-	for (i = 0; i < NR_IRQS; i++)
-		spin_lock_init(&irq_lists[i].lock);
-
+#ifdef CONFIG_SPARC
+	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
+#else
+	serial8250_reg.nr = UART_NR;
 	ret = uart_register_driver(&serial8250_reg);
+#endif
 	if (ret)
 		goto out;
 
@@ -2986,7 +2991,11 @@ static int __init serial8250_init(void)
  put_dev:
 	platform_device_put(serial8250_isa_devs);
  unreg_uart_drv:
+#ifdef CONFIG_SPARC
+	sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
 	uart_unregister_driver(&serial8250_reg);
+#endif
  out:
 	return ret;
 }
@@ -3005,7 +3014,11 @@ static void __exit serial8250_exit(void)
 	platform_driver_unregister(&serial8250_isa_driver);
 	platform_device_unregister(isa_dev);
 
+#ifdef CONFIG_SPARC
+	sunserial_unregister_minors(&serial8250_reg, UART_NR);
+#else
 	uart_unregister_driver(&serial8250_reg);
+#endif
 }
 
 module_init(serial8250_init);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0db20452c79..31786b3b0a6 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -9,7 +9,6 @@ menu "Serial drivers"
 # The new 8250/16550 serial drivers
 config SERIAL_8250
 	tristate "8250/16550 and compatible serial support"
-	depends on (BROKEN || !SPARC)
 	select SERIAL_CORE
 	---help---
 	  This selects whether you want to include the driver for the standard
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 1462eb3f7bd..0c17c8ddb19 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -4,6 +4,16 @@
 
 obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 obj-$(CONFIG_SERIAL_21285) += 21285.o
+
+# These Sparc drivers have to appear before others such as 8250
+# which share ttySx minor node space.  Otherwise console device
+# names change and other unplesantries.
+obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
+obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
+obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
+obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
+obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+
 obj-$(CONFIG_SERIAL_8250) += 8250.o
 obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
 obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
@@ -31,12 +41,7 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
 obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
-obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
-obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
-obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
-obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
-- 
cgit v1.2.3-70-g09d2


From fe6e29fdb1a7b94891bbdd3c67358fe4ed14639d Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 13 Oct 2008 10:44:08 +0100
Subject: tty: simplify ktermios allocation

Copy the simplification from the pty unix98 special case to the generic one.
This allows us to kill off driver->termios_locked entirely which is nice. We
have to whack bits of the cris driver as it meddles in places it shouldn't
providing its own arrays that were never used anyway.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_io.c    | 46 +++++++---------------------------------------
 drivers/serial/crisv10.c |  3 ---
 2 files changed, 7 insertions(+), 42 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 95908396102..502cad68f83 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1235,27 +1235,20 @@ struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
 
 int tty_init_termios(struct tty_struct *tty)
 {
-	struct ktermios *tp, *ltp;
+	struct ktermios *tp;
 	int idx = tty->index;
 
 	tp = tty->driver->termios[idx];
-	ltp = tty->driver->termios_locked[idx];
 	if (tp == NULL) {
-		WARN_ON(ltp != NULL);
-		tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
-		ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
-		if (tp == NULL || ltp == NULL) {
-			kfree(tp);
-			kfree(ltp);
+		tp = kzalloc(sizeof(struct ktermios[2]), GFP_KERNEL);
+		if (tp == NULL)
 			return -ENOMEM;
-		}
 		memcpy(tp, &tty->driver->init_termios,
 						sizeof(struct ktermios));
 		tty->driver->termios[idx] = tp;
-		tty->driver->termios_locked[idx] = ltp;
 	}
 	tty->termios = tp;
-	tty->termios_locked = ltp;
+	tty->termios_locked = tp + 1;
 
 	/* Compatibility until drivers always set this */
 	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
@@ -1439,10 +1432,6 @@ void tty_free_termios(struct tty_struct *tty)
 		tp = tty->termios;
 		tty->driver->termios[idx] = NULL;
 		kfree(tp);
-
-		tp = tty->termios_locked;
-		tty->driver->termios_locked[idx] = NULL;
-		kfree(tp);
 	}
 }
 EXPORT_SYMBOL(tty_free_termios);
@@ -1575,12 +1564,6 @@ void tty_release_dev(struct file *filp)
 			       idx, tty->name);
 			return;
 		}
-		if (tty->termios_locked != tty->driver->termios_locked[idx]) {
-			printk(KERN_DEBUG "tty_release_dev: driver.termios_locked[%d] not "
-			       "termios_locked for (%s)\n",
-			       idx, tty->name);
-			return;
-		}
 	}
 #endif
 
@@ -1604,13 +1587,6 @@ void tty_release_dev(struct file *filp)
 			       idx, tty->name);
 			return;
 		}
-		if (o_tty->termios_locked !=
-		      tty->driver->other->termios_locked[idx]) {
-			printk(KERN_DEBUG "tty_release_dev: other->termios_locked["
-					  "%d] not o_termios_locked for (%s)\n",
-			       idx, tty->name);
-			return;
-		}
 		if (o_tty->link != tty) {
 			printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n");
 			return;
@@ -2930,18 +2906,13 @@ static void destruct_tty_driver(struct kref *kref)
 				driver->termios[i] = NULL;
 				kfree(tp);
 			}
-			tp = driver->termios_locked[i];
-			if (tp) {
-				driver->termios_locked[i] = NULL;
-				kfree(tp);
-			}
 			if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
 				tty_unregister_device(driver, i);
 		}
 		p = driver->ttys;
 		proc_tty_unregister_driver(driver);
 		driver->ttys = NULL;
-		driver->termios = driver->termios_locked = NULL;
+		driver->termios = NULL;
 		kfree(p);
 		cdev_del(&driver->cdev);
 	}
@@ -2978,7 +2949,7 @@ int tty_register_driver(struct tty_driver *driver)
 	void **p = NULL;
 
 	if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
-		p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
+		p = kzalloc(driver->num * 2 * sizeof(void *), GFP_KERNEL);
 		if (!p)
 			return -ENOMEM;
 	}
@@ -3002,12 +2973,9 @@ int tty_register_driver(struct tty_driver *driver)
 	if (p) {
 		driver->ttys = (struct tty_struct **)p;
 		driver->termios = (struct ktermios **)(p + driver->num);
-		driver->termios_locked = (struct ktermios **)
-							(p + driver->num * 2);
 	} else {
 		driver->ttys = NULL;
 		driver->termios = NULL;
-		driver->termios_locked = NULL;
 	}
 
 	cdev_init(&driver->cdev, &tty_fops);
@@ -3016,7 +2984,7 @@ int tty_register_driver(struct tty_driver *driver)
 	if (error) {
 		unregister_chrdev_region(dev, driver->num);
 		driver->ttys = NULL;
-		driver->termios = driver->termios_locked = NULL;
+		driver->termios = NULL;
 		kfree(p);
 		return error;
 	}
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index a467c77d8a1..211c21797ce 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -457,7 +457,6 @@ static struct e100_serial rs_table[] = {
 #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
 
 static struct ktermios *serial_termios[NR_PORTS];
-static struct ktermios *serial_termios_locked[NR_PORTS];
 #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
 static struct fast_timer fast_timers[NR_PORTS];
 #endif
@@ -4448,8 +4447,6 @@ rs_init(void)
 	driver->init_termios.c_ispeed = 115200;
 	driver->init_termios.c_ospeed = 115200;
 	driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-	driver->termios = serial_termios;
-	driver->termios_locked = serial_termios_locked;
 
 	tty_set_operations(driver, &rs_ops);
         serial_driver = driver;
-- 
cgit v1.2.3-70-g09d2


From 8440838bc5337243917f13bc14ea2445da5e0197 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 13 Oct 2008 10:45:26 +0100
Subject: serial: fix device name reporting when minor space is shared between
 drivers

The multiple drivers share the minor space occupied by a particular major
number, the actual index within the device name's space is indicated by
the tty_driver->name_base + uart_port->line

Another usable formula is (uart_driver->minor - MINOR_BASE) + port->line

Use those to print the device names properly in such situations in
serial_core.c and 8250.c

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c        | 22 +++++++++++++++-------
 drivers/serial/serial_core.c |  7 +++++--
 2 files changed, 20 insertions(+), 9 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index db2cdc103c8..d4104a3bbe8 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -57,6 +57,13 @@ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
 
 static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
 
+static struct uart_driver serial8250_reg;
+
+static int serial_index(struct uart_port *port)
+{
+	return (serial8250_reg.minor - 64) + port->line;
+}
+
 /*
  * Debugging.
  */
@@ -997,7 +1004,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 		return;
 
 	DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
-			up->port.line, up->port.iobase, up->port.membase);
+		       serial_index(&up->port), up->port.iobase, up->port.membase);
 
 	/*
 	 * We really do need global IRQs disabled here - we're going to
@@ -1132,8 +1139,8 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	if (up->capabilities != uart_config[up->port.type].flags) {
 		printk(KERN_WARNING
 		       "ttyS%d: detected caps %08x should be %08x\n",
-			up->port.line, up->capabilities,
-			uart_config[up->port.type].flags);
+		       serial_index(&up->port), up->capabilities,
+		       uart_config[up->port.type].flags);
 	}
 
 	up->port.fifosize = uart_config[up->port.type].fifo_size;
@@ -1857,7 +1864,8 @@ static int serial8250_startup(struct uart_port *port)
 	 */
 	if (!(up->port.flags & UPF_BUGGY_UART) &&
 	    (serial_inp(up, UART_LSR) == 0xff)) {
-		printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+		printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+		       serial_index(&up->port));
 		return -ENODEV;
 	}
 
@@ -1912,7 +1920,8 @@ static int serial8250_startup(struct uart_port *port)
 		 */
 		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
 			up->bugs |= UART_BUG_THRE;
-			pr_debug("ttyS%d - using backup timer\n", port->line);
+			pr_debug("ttyS%d - using backup timer\n",
+				 serial_index(port));
 		}
 	}
 
@@ -1972,7 +1981,7 @@ static int serial8250_startup(struct uart_port *port)
 		if (!(up->bugs & UART_BUG_TXEN)) {
 			up->bugs |= UART_BUG_TXEN;
 			pr_debug("ttyS%d - enabling bad tx status workarounds\n",
-				 port->line);
+				 serial_index(port));
 		}
 	} else {
 		up->bugs &= ~UART_BUG_TXEN;
@@ -2633,7 +2642,6 @@ static int serial8250_console_early_setup(void)
 	return serial8250_find_port_for_earlycon();
 }
 
-static struct uart_driver serial8250_reg;
 static struct console serial8250_console = {
 	.name		= "ttyS",
 	.write		= serial8250_console_write,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 308588e2072..6bdf3362e3b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -2051,7 +2051,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 					"transmitter\n",
 			       port->dev ? port->dev->bus_id : "",
 			       port->dev ? ": " : "",
-			       drv->dev_name, port->line);
+			       drv->dev_name,
+			       drv->tty_driver->name_base + port->line);
 
 		ops->shutdown(port);
 	}
@@ -2176,7 +2177,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
 	       port->dev ? port->dev->bus_id : "",
 	       port->dev ? ": " : "",
-	       drv->dev_name, port->line, address, port->irq, uart_type(port));
+	       drv->dev_name,
+	       drv->tty_driver->name_base + port->line,
+	       address, port->irq, uart_type(port));
 }
 
 static void
-- 
cgit v1.2.3-70-g09d2


From 4aba41ea8bdc1b475861f5e5c1649ab20251090c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Tue, 14 Oct 2008 11:29:06 +0100
Subject: 8250: Fix lock warning (and possible crash)

Splitting the 8250 code back up to avoid a clash with the NR_IRQS removal
patch introduced a last minute bug. Put back the additional needed lines
for the old lock init

Signed-off-by: Alan Cox <alan@redhat.com>
[ Ingo also reports that this can cause a spontaneous reboot crash with
  certain configs, and sends in an identical patch ]
Tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/serial')

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index d4104a3bbe8..d3ca7d32abe 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2969,6 +2969,9 @@ static int __init serial8250_init(void)
 		"%d ports, IRQ sharing %sabled\n", nr_uarts,
 		share_irqs ? "en" : "dis");
 
+	for (i = 0; i < NR_IRQS; i++)
+		spin_lock_init(&irq_lists[i].lock);
+
 #ifdef CONFIG_SPARC
 	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
 #else
-- 
cgit v1.2.3-70-g09d2