From 6ae3b84d979308671bf6f6a2123c258a8603d61c Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 18 Oct 2009 18:14:32 +0200
Subject: serial_cs: use pcmcia_loop_config() and pre-determined values

As the PCMCIA core already determines the multifunction count, the
ConfigBase address and the Present value, we can use them directly
instead of parsing the CIS again. By making use of pcmcia_loop_config(),
we can further remove the remaining call to pcmcia_get_first_tuple()
and friends.

CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/serial/serial_cs.c | 87 ++++++++++++----------------------------------
 1 file changed, 23 insertions(+), 64 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ff4617e2142..7bf02cf3123 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -426,21 +426,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
-	int i;
-	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != 0)
-		return i;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -665,6 +650,25 @@ static int multi_config(struct pcmcia_device *link)
 	return 0;
 }
 
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+				  cistpl_cftable_entry_t *cf,
+				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
+				  void *priv_data)
+{
+	struct serial_info *info = p_dev->priv;
+
+	if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+		info->multi = cf->io.win[0].len >> 3;
+
+	if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+		(cf->io.win[1].len == 8))
+		info->multi = 2;
+
+	return 0; /* break */
+}
+
+
 /*======================================================================
 
     serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +680,14 @@ static int multi_config(struct pcmcia_device *link)
 static int serial_config(struct pcmcia_device * link)
 {
 	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
-	int i, last_ret, last_fn;
+	int i;
 
 	DEBUG(0, "serial_config(0x%p)\n", link);
 
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		goto failed;
-
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
-
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-
-	/* Get configuration register information */
-	tuple->DesiredTuple = CISTPL_CONFIG;
-	last_ret = first_tuple(link, tuple, parse);
-	if (last_ret != 0) {
-		last_fn = ParseTuple;
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse->config.base;
-	link->conf.Present = parse->config.rmask[0];
-
 	/* Is this a compliant multifunction card? */
-	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi = (first_tuple(link, tuple, parse) == 0);
+	info->multi = (link->socket->functions > 1);
 
 	/* Is this a multiport card? */
-	tuple->DesiredTuple = CISTPL_MANFID;
 	info->manfid = link->manf_id;
 	info->prodid = link->card_id;
 
@@ -730,20 +702,11 @@ static int serial_config(struct pcmcia_device * link)
 
 	/* Another check for dual-serial cards: look for either serial or
 	   multifunction cards that ask for appropriate IO port ranges */
-	tuple->DesiredTuple = CISTPL_FUNCID;
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
-	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
-		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-		if (first_tuple(link, tuple, parse) == 0) {
-			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
-				info->multi = cf->io.win[0].len >> 3;
-			if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
-			    (cf->io.win[1].len == 8))
-				info->multi = 2;
-		}
-	}
+	     (link->func_id == CISTPL_FUNCID_SERIAL)))
+		pcmcia_loop_config(link, serial_check_for_multi, info);
 
 	/*
 	 * Apply any multi-port quirk.
@@ -768,14 +731,10 @@ static int serial_config(struct pcmcia_device * link)
 			goto failed;
 
 	link->dev_node = &info->node[0];
-	kfree(cfg_mem);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	serial_remove(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }
 
-- 
cgit v1.2.3-70-g09d2


From d4ac42a582e46d7f86f0acb4253a310423c72c4c Mon Sep 17 00:00:00 2001
From: Kristoffer Glembo <kristoffer@gaisler.com>
Date: Wed, 4 Nov 2009 08:39:46 -0800
Subject: sparc: Support for GRLIB APBUART serial port

This patch adds support for the APBUART serial port from Aeroflex
Gaisler's IP library GRLIB. It is currently used in all LEON3 designs
(SPARC V8) but can be used on other platforms as well (which support OF).

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/Kconfig      |  13 +
 drivers/serial/Makefile     |   1 +
 drivers/serial/apbuart.c    | 710 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/serial/apbuart.h    |  64 ++++
 include/linux/serial_core.h |   3 +
 5 files changed, 791 insertions(+)
 create mode 100644 drivers/serial/apbuart.c
 create mode 100644 drivers/serial/apbuart.h

(limited to 'drivers/serial')

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e5225725727..50943ff78f4 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1477,4 +1477,17 @@ config SERIAL_BCM63XX_CONSOLE
 	  If you have enabled the serial port on the bcm63xx CPU
 	  you can make it the console by answering Y to this option.
 
+config SERIAL_GRLIB_GAISLER_APBUART
+	tristate "GRLIB APBUART serial support"
+	depends on OF
+	---help---
+	Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+	bool "Console on GRLIB APBUART serial port"
+	depends on SERIAL_GRLIB_GAISLER_APBUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	Support for running a console on the GRLIB APBUART
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d21d5dd5d04..5548fe7df61 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
+obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
new file mode 100644
index 00000000000..8a343045131
--- /dev/null
+++ b/drivers/serial/apbuart.c
@@ -0,0 +1,710 @@
+/*
+ *  Driver for GRLIB serial ports (APBUART)
+ *
+ *  Based on linux/drivers/serial/amba.c
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ *  Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
+ *  Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
+ *  Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
+ */
+
+#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <asm/irq.h>
+#include <asm/oplib.h>
+
+#include "apbuart.h"
+
+#define SERIAL_APBUART_MAJOR	TTY_MAJOR
+#define SERIAL_APBUART_MINOR	64
+#define UART_DUMMY_RSR_RX	0x8000	/* for ignore all read */
+
+static void apbuart_tx_chars(struct uart_port *port);
+
+static void apbuart_stop_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_start_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr |= UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+
+	if (UART_GET_STATUS(port) & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+}
+
+static void apbuart_stop_rx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_RI);
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_enable_ms(struct uart_port *port)
+{
+	/* No modem status change interrupts for APBUART */
+}
+
+static void apbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned int status, ch, rsr, flag;
+	unsigned int max_chars = port->fifosize;
+
+	status = UART_GET_STATUS(port);
+
+	while (UART_RX_DATA(status) && (max_chars--)) {
+
+		ch = UART_GET_CHAR(port);
+		flag = TTY_NORMAL;
+
+		port->icount.rx++;
+
+		rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
+		UART_PUT_STATUS(port, 0);
+		if (rsr & UART_STATUS_ERR) {
+
+			if (rsr & UART_STATUS_BR) {
+				rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					goto ignore_char;
+			} else if (rsr & UART_STATUS_PE) {
+				port->icount.parity++;
+			} else if (rsr & UART_STATUS_FE) {
+				port->icount.frame++;
+			}
+			if (rsr & UART_STATUS_OE)
+				port->icount.overrun++;
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & UART_STATUS_PE)
+				flag = TTY_PARITY;
+			else if (rsr & UART_STATUS_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+		uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
+
+
+	      ignore_char:
+		status = UART_GET_STATUS(port);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static void apbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		apbuart_stop_tx(port);
+		return;
+	}
+
+	/* amba: fill FIFO */
+	count = port->fifosize >> 1;
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		apbuart_stop_tx(port);
+}
+
+static irqreturn_t apbuart_int(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int status;
+
+	spin_lock(&port->lock);
+
+	status = UART_GET_STATUS(port);
+	if (status & UART_STATUS_DR)
+		apbuart_rx_chars(port);
+	if (status & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int apbuart_tx_empty(struct uart_port *port)
+{
+	unsigned int status = UART_GET_STATUS(port);
+	return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int apbuart_get_mctrl(struct uart_port *port)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+}
+
+static void apbuart_break_ctl(struct uart_port *port, int break_state)
+{
+	/* We don't support sending break */
+}
+
+static int apbuart_startup(struct uart_port *port)
+{
+	int retval;
+	unsigned int cr;
+
+	/* Allocate the IRQ */
+	retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
+	if (retval)
+		return retval;
+
+	/* Finally, enable interrupts */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr | UART_CTRL_RE | UART_CTRL_TE |
+		      UART_CTRL_RI | UART_CTRL_TI);
+
+	return 0;
+}
+
+static void apbuart_shutdown(struct uart_port *port)
+{
+	unsigned int cr;
+
+	/* disable all interrupts, disable the port */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr & ~(UART_CTRL_RE | UART_CTRL_TE |
+			     UART_CTRL_RI | UART_CTRL_TI));
+
+	/* Free the interrupt */
+	free_irq(port->irq, port);
+}
+
+static void apbuart_set_termios(struct uart_port *port,
+				struct ktermios *termios, struct ktermios *old)
+{
+	unsigned int cr;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	/* Ask the core to calculate the divisor for us. */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	if (baud == 0)
+		panic("invalid baudrate %i\n", port->uartclk / 16);
+
+	/* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
+	quot = (uart_get_divisor(port, baud)) * 2;
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
+
+	if (termios->c_cflag & PARENB) {
+		cr |= UART_CTRL_PE;
+		if ((termios->c_cflag & PARODD))
+			cr |= UART_CTRL_PS;
+	}
+
+	/* Enable flow control. */
+	if (termios->c_cflag & CRTSCTS)
+		cr |= UART_CTRL_FL;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = UART_STATUS_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Ignore all characters if CREAD is not set. */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+	/* Set baud rate */
+	quot -= 1;
+	UART_PUT_SCAL(port, quot);
+	UART_PUT_CTRL(port, cr);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *apbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
+}
+
+static void apbuart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, 0x100);
+}
+
+static int apbuart_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
+	    != NULL ? 0 : -EBUSY;
+	return 0;
+}
+
+/* Configure/autoconfigure the port */
+static void apbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_APBUART;
+		apbuart_request_port(port);
+	}
+}
+
+/* Verify the new serial_struct (for TIOCSSERIAL) */
+static int apbuart_verify_port(struct uart_port *port,
+			       struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops grlib_apbuart_ops = {
+	.tx_empty = apbuart_tx_empty,
+	.set_mctrl = apbuart_set_mctrl,
+	.get_mctrl = apbuart_get_mctrl,
+	.stop_tx = apbuart_stop_tx,
+	.start_tx = apbuart_start_tx,
+	.stop_rx = apbuart_stop_rx,
+	.enable_ms = apbuart_enable_ms,
+	.break_ctl = apbuart_break_ctl,
+	.startup = apbuart_startup,
+	.shutdown = apbuart_shutdown,
+	.set_termios = apbuart_set_termios,
+	.type = apbuart_type,
+	.release_port = apbuart_release_port,
+	.request_port = apbuart_request_port,
+	.config_port = apbuart_config_port,
+	.verify_port = apbuart_verify_port,
+};
+
+static struct uart_port grlib_apbuart_ports[UART_NR];
+static struct device_node *grlib_apbuart_nodes[UART_NR];
+
+static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
+{
+	int ctrl, loop = 0;
+	int status;
+	int fifosize;
+	unsigned long flags;
+
+	ctrl = UART_GET_CTRL(port);
+
+	/*
+	 * Enable the transceiver and wait for it to be ready to send data.
+	 * Clear interrupts so that this process will not be externally
+	 * interrupted in the middle (which can cause the transceiver to
+	 * drain prematurely).
+	 */
+
+	local_irq_save(flags);
+
+	UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
+
+	while (!UART_TX_READY(UART_GET_STATUS(port)))
+		loop++;
+
+	/*
+	 * Disable the transceiver so data isn't actually sent during the
+	 * actual test.
+	 */
+
+	UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
+
+	fifosize = 1;
+	UART_PUT_CHAR(port, 0);
+
+	/*
+	 * So long as transmitting a character increments the tranceivier FIFO
+	 * length the FIFO must be at least that big. These bytes will
+	 * automatically drain off of the FIFO.
+	 */
+
+	status = UART_GET_STATUS(port);
+	while (((status >> 20) & 0x3F) == fifosize) {
+		fifosize++;
+		UART_PUT_CHAR(port, 0);
+		status = UART_GET_STATUS(port);
+	}
+
+	fifosize--;
+
+	UART_PUT_CTRL(port, ctrl);
+	local_irq_restore(flags);
+
+	if (fifosize == 0)
+		fifosize = 1;
+
+	return fifosize;
+}
+
+static void apbuart_flush_fifo(struct uart_port *port)
+{
+	int i;
+
+	for (i = 0; i < port->fifosize; i++)
+		UART_GET_CHAR(port);
+}
+
+
+/* ======================================================================== */
+/* Console driver, if enabled                                               */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+
+static void apbuart_console_putchar(struct uart_port *port, int ch)
+{
+	unsigned int status;
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CHAR(port, ch);
+}
+
+static void
+apbuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &grlib_apbuart_ports[co->index];
+	unsigned int status, old_cr, new_cr;
+
+	/* First save the CR then disable the interrupts */
+	old_cr = UART_GET_CTRL(port);
+	new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
+	UART_PUT_CTRL(port, new_cr);
+
+	uart_console_write(port, s, count, apbuart_console_putchar);
+
+	/*
+	 *      Finally, wait for transmitter to become empty
+	 *      and restore the TCR
+	 */
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CTRL(port, old_cr);
+}
+
+static void __init
+apbuart_console_get_options(struct uart_port *port, int *baud,
+			    int *parity, int *bits)
+{
+	if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
+
+		unsigned int quot, status;
+		status = UART_GET_STATUS(port);
+
+		*parity = 'n';
+		if (status & UART_CTRL_PE) {
+			if ((status & UART_CTRL_PS) == 0)
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+
+		*bits = 8;
+		quot = UART_GET_SCAL(port) / 8;
+		*baud = port->uartclk / (16 * (quot + 1));
+	}
+}
+
+static int __init apbuart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
+		 co, co->index, options);
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= grlib_apbuart_port_nr)
+		co->index = 0;
+
+	port = &grlib_apbuart_ports[co->index];
+
+	spin_lock_init(&port->lock);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		apbuart_console_get_options(port, &baud, &parity, &bits);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver grlib_apbuart_driver;
+
+static struct console grlib_apbuart_console = {
+	.name = "ttyS",
+	.write = apbuart_console_write,
+	.device = uart_console_device,
+	.setup = apbuart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &grlib_apbuart_driver,
+};
+
+
+static void grlib_apbuart_configure(void);
+
+static int __init apbuart_console_init(void)
+{
+	grlib_apbuart_configure();
+	register_console(&grlib_apbuart_console);
+	return 0;
+}
+
+console_initcall(apbuart_console_init);
+
+#define APBUART_CONSOLE	(&grlib_apbuart_console)
+#else
+#define APBUART_CONSOLE	NULL
+#endif
+
+static struct uart_driver grlib_apbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "serial",
+	.dev_name = "ttyS",
+	.major = SERIAL_APBUART_MAJOR,
+	.minor = SERIAL_APBUART_MINOR,
+	.nr = UART_NR,
+	.cons = APBUART_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* OF Platform Driver                                                       */
+/* ======================================================================== */
+
+static int __devinit apbuart_probe(struct of_device *op,
+				   const struct of_device_id *match)
+{
+	int i = -1;
+	struct uart_port *port = NULL;
+
+	i = 0;
+	for (i = 0; i < grlib_apbuart_port_nr; i++) {
+		if (op->node == grlib_apbuart_nodes[i])
+			break;
+	}
+
+	port = &grlib_apbuart_ports[i];
+	port->dev = &op->dev;
+
+	uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
+
+	apbuart_flush_fifo((struct uart_port *) port);
+
+	printk(KERN_INFO "grlib-apbuart at 0x%x, irq %d\n",
+	       port->mapbase, port->irq);
+	return 0;
+
+}
+
+static struct of_device_id __initdata apbuart_match[] = {
+	{
+	 .name = "GAISLER_APBUART",
+	 },
+	{},
+};
+
+static struct of_platform_driver grlib_apbuart_of_driver = {
+	.match_table = apbuart_match,
+	.probe = apbuart_probe,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "grlib-apbuart",
+		   },
+};
+
+
+static void grlib_apbuart_configure(void)
+{
+	static int enum_done;
+	struct device_node *np;
+	struct uart_port *port = NULL;
+
+	int node;
+	int freq_khz;
+	int v = 0, d = 0;
+	unsigned int addr;
+	int irq, line;
+	struct amba_prom_registers *regs;
+
+	if (enum_done)
+		return;
+
+	/* Get bus frequency */
+	node = prom_getchild(prom_root_node);
+	freq_khz = prom_getint(node, "clock-frequency");
+
+	line = 0;
+	for_each_matching_node(np, apbuart_match) {
+
+		int *vendor = (int *) of_get_property(np, "vendor", NULL);
+		int *device = (int *) of_get_property(np, "device", NULL);
+		int *irqs = (int *) of_get_property(np, "interrupts", NULL);
+		regs = (struct amba_prom_registers *)
+		    of_get_property(np, "reg", NULL);
+
+		if (vendor)
+			v = *vendor;
+		if (device)
+			d = *device;
+
+		if (!irqs || !regs)
+			return;
+
+		grlib_apbuart_nodes[line] = np;
+
+		addr = regs->phys_addr;
+		irq = *irqs;
+
+		port = &grlib_apbuart_ports[line];
+
+		port->mapbase = addr;
+		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
+		port->irq = irq;
+		port->iotype = UPIO_MEM;
+		port->ops = &grlib_apbuart_ops;
+		port->flags = UPF_BOOT_AUTOCONF;
+		port->line = line;
+		port->uartclk = freq_khz * 1000;
+		port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
+		line++;
+
+		/* We support maximum UART_NR uarts ... */
+		if (line == UART_NR)
+			break;
+
+	}
+
+	enum_done = 1;
+
+	grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+}
+
+static int __init grlib_apbuart_init(void)
+{
+	int ret;
+
+	/* Find all APBUARTS in device the tree and initialize their ports */
+	grlib_apbuart_configure();
+
+	printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
+
+	ret = uart_register_driver(&grlib_apbuart_driver);
+
+	if (ret) {
+		printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+		       __FILE__, ret);
+		return ret;
+	}
+
+	ret = of_register_driver(&grlib_apbuart_of_driver, &of_platform_bus_type);
+
+	if (ret) {
+		printk(KERN_ERR
+		       "%s: of_register_platform_driver failed (%i)\n",
+		       __FILE__, ret);
+		uart_unregister_driver(&grlib_apbuart_driver);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void __exit grlib_apbuart_exit(void)
+{
+	int i;
+
+	for (i = 0; i < grlib_apbuart_port_nr; i++)
+		uart_remove_one_port(&grlib_apbuart_driver,
+				     &grlib_apbuart_ports[i]);
+
+	uart_unregister_driver(&grlib_apbuart_driver);
+
+}
+
+module_init(grlib_apbuart_init);
+module_exit(grlib_apbuart_exit);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB");
+MODULE_DESCRIPTION("GRLIB APBUART serial driver");
+MODULE_VERSION("2.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h
new file mode 100644
index 00000000000..5faf87c8d2b
--- /dev/null
+++ b/drivers/serial/apbuart.h
@@ -0,0 +1,64 @@
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+#include <asm/io.h>
+
+#define UART_NR		8
+static int grlib_apbuart_port_nr;
+
+struct grlib_apbuart_regs_map {
+	u32 data;
+	u32 status;
+	u32 ctrl;
+	u32 scaler;
+};
+
+struct amba_prom_registers {
+	unsigned int phys_addr;
+	unsigned int reg_size;
+};
+
+/*
+ *  The following defines the bits in the APBUART Status Registers.
+ */
+#define UART_STATUS_DR   0x00000001	/* Data Ready */
+#define UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
+#define UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
+#define UART_STATUS_BR   0x00000008	/* Break Error */
+#define UART_STATUS_OE   0x00000010	/* RX Overrun Error */
+#define UART_STATUS_PE   0x00000020	/* RX Parity Error */
+#define UART_STATUS_FE   0x00000040	/* RX Framing Error */
+#define UART_STATUS_ERR  0x00000078	/* Error Mask */
+
+/*
+ *  The following defines the bits in the APBUART Ctrl Registers.
+ */
+#define UART_CTRL_RE     0x00000001	/* Receiver enable */
+#define UART_CTRL_TE     0x00000002	/* Transmitter enable */
+#define UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
+#define UART_CTRL_TI     0x00000008	/* Transmitter irq */
+#define UART_CTRL_PS     0x00000010	/* Parity select */
+#define UART_CTRL_PE     0x00000020	/* Parity enable */
+#define UART_CTRL_FL     0x00000040	/* Flow control enable */
+#define UART_CTRL_LB     0x00000080	/* Loopback enable */
+
+#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
+
+#define APBBASE_DATA_P(port)	(&(APBBASE(port)->data))
+#define APBBASE_STATUS_P(port)	(&(APBBASE(port)->status))
+#define APBBASE_CTRL_P(port)	(&(APBBASE(port)->ctrl))
+#define APBBASE_SCALAR_P(port)	(&(APBBASE(port)->scaler))
+
+#define UART_GET_CHAR(port)	(__raw_readl(APBBASE_DATA_P(port)))
+#define UART_PUT_CHAR(port, v)	(__raw_writel(v, APBBASE_DATA_P(port)))
+#define UART_GET_STATUS(port)	(__raw_readl(APBBASE_STATUS_P(port)))
+#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
+#define UART_GET_CTRL(port)	(__raw_readl(APBBASE_CTRL_P(port)))
+#define UART_PUT_CTRL(port, v)	(__raw_writel(v, APBBASE_CTRL_P(port)))
+#define UART_GET_SCAL(port)	(__raw_readl(APBBASE_SCALAR_P(port)))
+#define UART_PUT_SCAL(port, v)	(__raw_writel(v, APBBASE_SCALAR_P(port)))
+
+#define UART_RX_DATA(s)		(((s) & UART_STATUS_DR) != 0)
+#define UART_TX_READY(s)	(((s) & UART_STATUS_THE) != 0)
+
+#endif /* __GRLIB_APBUART_H__ */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index db532ce288b..8c3dd36fe91 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -179,6 +179,9 @@
 /* BCM63xx family SoCs */
 #define PORT_BCM63XX	89
 
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
-- 
cgit v1.2.3-70-g09d2


From 384a17b284b9dc92b480cf388310a25e255bac8a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 4 Nov 2009 08:47:03 -0800
Subject: apbuart: Fix build warning.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/serial/apbuart.c: In function ‘apbuart_probe’:
drivers/serial/apbuart.c:574: warning: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘resource_size_t’

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/apbuart.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index 8a343045131..c7883a36be9 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -570,8 +570,8 @@ static int __devinit apbuart_probe(struct of_device *op,
 
 	apbuart_flush_fifo((struct uart_port *) port);
 
-	printk(KERN_INFO "grlib-apbuart at 0x%x, irq %d\n",
-	       port->mapbase, port->irq);
+	printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
+	       (unsigned long long) port->mapbase, port->irq);
 	return 0;
 
 }
-- 
cgit v1.2.3-70-g09d2


From d13500981e7df7f0e84d7f37f85d720cefe6043e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 4 Nov 2009 23:59:18 -0800
Subject: apbuart: Kill dependency on deprecated Sparc-only PROM interfaces.

Use the proper modern OF ones instead.

Noticed by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/apbuart.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index c7883a36be9..5f9dec38db8 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -29,7 +29,6 @@
 #include <linux/io.h>
 #include <linux/serial_core.h>
 #include <asm/irq.h>
-#include <asm/oplib.h>
 
 #include "apbuart.h"
 
@@ -596,10 +595,9 @@ static struct of_platform_driver grlib_apbuart_of_driver = {
 static void grlib_apbuart_configure(void)
 {
 	static int enum_done;
-	struct device_node *np;
+	struct device_node *np, *rp;
 	struct uart_port *port = NULL;
-
-	int node;
+	const u32 *prop;
 	int freq_khz;
 	int v = 0, d = 0;
 	unsigned int addr;
@@ -610,8 +608,10 @@ static void grlib_apbuart_configure(void)
 		return;
 
 	/* Get bus frequency */
-	node = prom_getchild(prom_root_node);
-	freq_khz = prom_getint(node, "clock-frequency");
+	rp = of_find_node_by_name(NULL, "/");
+	rp = of_get_next_child(rp, NULL);
+	prop = of_get_property(rp, "clock-frequency", NULL);
+	freq_khz = *prop;
 
 	line = 0;
 	for_each_matching_node(np, apbuart_match) {
-- 
cgit v1.2.3-70-g09d2


From ddaf1b27edf72372242d752730d526b79312a44e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 6 Nov 2009 00:26:39 -0800
Subject: apbuart: Fix build and missing driver unregister.

linux/of_platform.h needs to be included

OF driver needs to be unregistered

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/apbuart.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index 5f9dec38db8..a1e95033da5 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
@@ -676,8 +677,7 @@ static int __init grlib_apbuart_init(void)
 		return ret;
 	}
 
-	ret = of_register_driver(&grlib_apbuart_of_driver, &of_platform_bus_type);
-
+	ret = of_register_platform_driver(&grlib_apbuart_of_driver);
 	if (ret) {
 		printk(KERN_ERR
 		       "%s: of_register_platform_driver failed (%i)\n",
@@ -698,7 +698,7 @@ static void __exit grlib_apbuart_exit(void)
 				     &grlib_apbuart_ports[i]);
 
 	uart_unregister_driver(&grlib_apbuart_driver);
-
+	of_unregister_platform_driver(&grlib_apbuart_of_driver);
 }
 
 module_init(grlib_apbuart_init);
-- 
cgit v1.2.3-70-g09d2


From 9ec0bf41b5030ccc691049754ed1398cad5e953e Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 24 Oct 2009 15:54:46 +0200
Subject: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK
 (serial_cs)

Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.

Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.

CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/serial/serial_cs.c | 53 +++++++++++++++-------------------------------
 1 file changed, 17 insertions(+), 36 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7bf02cf3123..3b31bee8576 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
 
 #include "8250.h"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
 	conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
-	int last_ret, last_fn;
+	int ret;
+
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
 	reg.Action = CS_WRITE;
 	reg.Value = reg.Value | 1;
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
+ failed:
 	return -ENODEV;
 }
 
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i;
 
-	DEBUG(0, "serial_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_release\n");
 
 	/*
 	 * Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
 {
 	struct serial_info *info;
 
-	DEBUG(0, "serial_attach()\n");
+	dev_dbg(&link->dev, "serial_attach()\n");
 
 	/* Create new serial device */
 	info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -370,7 +358,7 @@ static void serial_detach(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	DEBUG(0, "serial_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_detach\n");
 
 	/*
 	 * Ensure any outstanding scheduled tasks are completed.
@@ -507,15 +495,13 @@ static int simple_config(struct pcmcia_device *link)
 
 	printk(KERN_NOTICE
 	       "serial_cs: no usable port range found, giving up\n");
-	cs_error(link, RequestIO, i);
 	return -1;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
+
 	if (info->multi && (info->manfid == MANFID_3COM))
 		link->conf.ConfigIndex &= ~(0x08);
 
@@ -526,10 +512,8 @@ found_port:
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -1;
-	}
 	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
@@ -598,7 +582,6 @@ static int multi_config(struct pcmcia_device *link)
 		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
-		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
@@ -609,10 +592,8 @@ static int multi_config(struct pcmcia_device *link)
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -ENODEV;
-	}
 
 	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 	 * 8 registers are for the UART, the others are extra registers.
@@ -682,7 +663,7 @@ static int serial_config(struct pcmcia_device * link)
 	struct serial_info *info = link->priv;
 	int i;
 
-	DEBUG(0, "serial_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_config\n");
 
 	/* Is this a compliant multifunction card? */
 	info->multi = (link->socket->functions > 1);
-- 
cgit v1.2.3-70-g09d2


From 4edd5ad0f5a7a2238e5df311ce36789bae6751c0 Mon Sep 17 00:00:00 2001
From: Kristoffer Glembo <kristoffer@gaisler.com>
Date: Fri, 13 Nov 2009 13:25:06 -0800
Subject: apbuart: Use of_find_node_by_path to find root node.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/apbuart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index a1e95033da5..fe91319b5f6 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -609,7 +609,7 @@ static void grlib_apbuart_configure(void)
 		return;
 
 	/* Get bus frequency */
-	rp = of_find_node_by_name(NULL, "/");
+	rp = of_find_node_by_path("/");
 	rp = of_get_next_child(rp, NULL);
 	prop = of_get_property(rp, "clock-frequency", NULL);
 	freq_khz = *prop;
-- 
cgit v1.2.3-70-g09d2


From 4e68e188411ea98e40309700cf0c89ad4469ac1d Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 13:56:39 -0800
Subject: sunsab: Do not set sunsab_reg.cons right before registering minors.

Other Sun serial drivers do not do this, and if we keep it this way
it ends up registering all serial devices as consoles rather than
just the one which we explicitly register via sunserial_console_match()
which uses add_preferred_console().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/sunsab.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d1ad3412863..8755de8adbc 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1116,7 +1116,6 @@ static int __init sunsab_init(void)
 		if (!sunsab_ports)
 			return -ENOMEM;
 
-		sunsab_reg.cons = SUNSAB_CONSOLE();
 		err = sunserial_register_minors(&sunsab_reg, num_channels);
 		if (err) {
 			kfree(sunsab_ports);
-- 
cgit v1.2.3-70-g09d2


From 8301d386afc55c877bafe2c6c7dc75a96ddd2838 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 13:58:52 -0800
Subject: sunsu: Fix detection of SU ports which are RSC console or control.

These device nodes are named "rsc-console" and "rsc-control" rather
than 'serial', but the device_type property is 'serial' so we'll
tip off of that for detection.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/sunsu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/serial')

diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 68d262b1574..f6511a44d15 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1517,6 +1517,10 @@ static const struct of_device_id su_match[] = {
 		.name = "serial",
 		.compatible = "su",
 	},
+	{
+		.type = "serial",
+		.compatible = "su",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, su_match);
@@ -1548,6 +1552,12 @@ static int __init sunsu_init(void)
 				num_uart++;
 		}
 	}
+	for_each_node_by_type(dp, "serial") {
+		if (of_device_is_compatible(dp, "su")) {
+			if (su_get_type(dp) == SU_PORT_PORT)
+				num_uart++;
+		}
+	}
 
 	if (num_uart) {
 		err = sunserial_register_minors(&sunsu_reg, num_uart);
-- 
cgit v1.2.3-70-g09d2


From 4e3533d05b6e5e66d1cda27f6671251c99c62894 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 14:03:34 -0800
Subject: serial: suncore: Add 'ignore_line' argument to
 sunserial_console_match().

This tells the logic to ignore the line match when deciding whether the
device is the OpenFirmware specified console device or not.

This is going to be used in the SU driver for rsc-console detection.

There is probably a better way to handle this, but this is the least
intrusive solution for now which we can validate won't break any other
cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/suncore.c  | 19 ++++++++++---------
 drivers/serial/suncore.h  |  2 +-
 drivers/serial/sunsab.c   |  6 ++++--
 drivers/serial/sunsu.c    |  3 ++-
 drivers/serial/sunzilog.c |  6 ++++--
 5 files changed, 21 insertions(+), 15 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index a2d4a19550a..50d3b5e4ec7 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count)
 EXPORT_SYMBOL(sunserial_unregister_minors);
 
 int sunserial_console_match(struct console *con, struct device_node *dp,
-			    struct uart_driver *drv, int line)
+			    struct uart_driver *drv, int line, bool ignore_line)
 {
-	int off;
-
 	if (!con || of_console_device != dp)
 		return 0;
 
-	off = 0;
-	if (of_console_options &&
-	    *of_console_options == 'b')
-		off = 1;
+	if (!ignore_line) {
+		int off = 0;
 
-	if ((line & 1) != off)
-		return 0;
+		if (of_console_options &&
+		    *of_console_options == 'b')
+			off = 1;
+
+		if ((line & 1) != off)
+			return 0;
+	}
 
 	con->index = line;
 	drv->cons = con;
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index 042668aa602..cab95b3fbdd 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -26,7 +26,7 @@ extern int sunserial_register_minors(struct uart_driver *, int);
 extern void sunserial_unregister_minors(struct uart_driver *, int);
 
 extern int sunserial_console_match(struct console *, struct device_node *,
-				   struct uart_driver *, int);
+				   struct uart_driver *, int, bool);
 extern void sunserial_console_termios(struct console *);
 
 #endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 8755de8adbc..e7215c200ec 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id *
 		goto out1;
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[0].port.line);
+				&sunsab_reg, up[0].port.line,
+				false);
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[1].port.line);
+				&sunsab_reg, up[1].port.line,
+				false);
 
 	err = uart_add_one_port(&sunsab_reg, &up[0].port);
 	if (err)
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index f6511a44d15..4868b318e55 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1468,7 +1468,8 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	up->port.ops = &sunsu_pops;
 
 	sunserial_console_match(SUNSU_CONSOLE(), dp,
-				&sunsu_reg, up->port.line);
+				&sunsu_reg, up->port.line,
+				false);
 	err = uart_add_one_port(&sunsu_reg, &up->port);
 	if (err)
 		goto out_unmap;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index ef693ae22e7..3242688978e 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 
 	if (!keyboard_mouse) {
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[0].port.line))
+					    &sunzilog_reg, up[0].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[0].port);
 		if (err) {
@@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 			return err;
 		}
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[1].port.line))
+					    &sunzilog_reg, up[1].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[1].port);
 		if (err) {
-- 
cgit v1.2.3-70-g09d2


From 457931de3b0925dc2eb941bc7d611a509be36dff Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 14:09:56 -0800
Subject: serial: suncore: Fix RSC/LOM handling in sunserial_console_termios().

RSC and LOM devices have fixed speed settings.

We already had some code to match and handle "rsc" named devices on
E250 systems, but we also have to handle 'rsc-console', 'rsc-control',
and 'lom-console'.

Also, in order to get this right regardless of what 'output-device'
happens to be, explicitly pass the UART device node pointer to this
routine.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/suncore.c  | 18 ++++++++++--------
 drivers/serial/suncore.h  |  3 ++-
 drivers/serial/sunhv.c    |  2 +-
 drivers/serial/sunsab.c   |  2 +-
 drivers/serial/sunzilog.c |  2 +-
 5 files changed, 15 insertions(+), 12 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index 50d3b5e4ec7..ed7d958b0a0 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -77,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
 }
 EXPORT_SYMBOL(sunserial_console_match);
 
-void
-sunserial_console_termios(struct console *con)
+void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 {
-	struct device_node *dp;
-	const char *od, *mode, *s;
+	const char *mode, *s;
 	char mode_prop[] = "ttyX-mode";
 	int baud, bits, stop, cflag;
 	char parity;
 
-	dp = of_find_node_by_path("/options");
-	od = of_get_property(dp, "output-device", NULL);
-	if (!strcmp(od, "rsc")) {
-		mode = of_get_property(of_console_device,
+	if (!strcmp(uart_dp->name, "rsc") ||
+	    !strcmp(uart_dp->name, "rsc-console") ||
+	    !strcmp(uart_dp->name, "rsc-control")) {
+		mode = of_get_property(uart_dp,
 				       "ssp-console-modes", NULL);
 		if (!mode)
 			mode = "115200,8,n,1,-";
+	} else if (!strcmp(uart_dp->name, "lom-console")) {
+		mode = "9600,8,n,1,-";
 	} else {
+		struct device_node *dp;
 		char c;
 
 		c = 'a';
@@ -102,6 +103,7 @@ sunserial_console_termios(struct console *con)
 
 		mode_prop[3] = c;
 
+		dp = of_find_node_by_path("/options");
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index cab95b3fbdd..db2057936c3 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -27,6 +27,7 @@ extern void sunserial_unregister_minors(struct uart_driver *, int);
 
 extern int sunserial_console_match(struct console *, struct device_node *,
 				   struct uart_driver *, int, bool);
-extern void sunserial_console_termios(struct console *);
+extern void sunserial_console_termios(struct console *,
+				      struct device_node *);
 
 #endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index d548652dee5..d14cca7fb88 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 		goto out_free_con_read_page;
 
 	sunserial_console_match(&sunhv_console, op->node,
-				&sunhv_reg, port->line);
+				&sunhv_reg, port->line, false);
 
 	err = uart_add_one_port(&sunhv_reg, port);
 	if (err)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index e7215c200ec..d514e28d075 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	printk("Console: ttyS%d (SAB82532)\n",
 	       (sunsab_reg.minor - 64) + con->index);
 
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	switch (con->cflag & CBAUD) {
 	case B150: baud = 150; break;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 3242688978e..2c7a66af4f5 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
 	       (sunzilog_reg.minor - 64) + con->index, con->index);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	/* Firmware console speed is limited to 150-->38400 baud so
 	 * this hackish cflag thing is OK.
-- 
cgit v1.2.3-70-g09d2


From 1917d17b903955b8b2903626a2e01d071a5d0ec9 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 14:11:40 -0800
Subject: sunsu: Pass true 'ignore_line' to console match when RSC or LOM
 console.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/sunsu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4868b318e55..4ee4167c662 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1409,6 +1409,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 	struct uart_sunsu_port *up;
 	struct resource *rp;
 	enum su_type type;
+	bool ignore_line;
 	int err;
 
 	type = su_get_type(dp);
@@ -1467,9 +1468,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 
 	up->port.ops = &sunsu_pops;
 
+	ignore_line = false;
+	if (!strcmp(dp->name, "rsc-console") ||
+	    !strcmp(dp->name, "lom-console"))
+		ignore_line = true;
+
 	sunserial_console_match(SUNSU_CONSOLE(), dp,
 				&sunsu_reg, up->port.line,
-				false);
+				ignore_line);
 	err = uart_add_one_port(&sunsu_reg, &up->port);
 	if (err)
 		goto out_unmap;
-- 
cgit v1.2.3-70-g09d2


From be24656a5e2d68bfd0744f0742c4aceef2cf44b5 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 24 Nov 2009 14:12:50 -0800
Subject: sunsu: Use sunserial_console_termios() in sunsu_console_setup().

Be like the other Sun serial drivers otherwise the special handling of
OpenFirmware options and hard-coded overrides for LOM/RSC consoles
will not be handled.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/serial/sunsu.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 4ee4167c662..170d3d68c8f 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s,
  */
 static int __init sunsu_console_setup(struct console *co, char *options)
 {
+	static struct ktermios dummy;
+	struct ktermios termios;
 	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
 
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
@@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options)
 	 */
 	spin_lock_init(&port->lock);
 
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	/* Get firmware console settings.  */
+	sunserial_console_termios(co, to_of_device(port->dev)->node);
 
-	return uart_set_options(port, co, baud, parity, bits, flow);
+	memset(&termios, 0, sizeof(struct ktermios));
+	termios.c_cflag = co->cflag;
+	port->mctrl |= TIOCM_DTR;
+	port->ops->set_termios(port, &termios, &dummy);
+
+	return 0;
 }
 
 static struct console sunsu_console = {
-- 
cgit v1.2.3-70-g09d2


From dd2e5a156525f11754d9b1e0583f6bb49c253d62 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Tue, 3 Nov 2009 10:27:34 +0100
Subject: pcmcia: remove deprecated handle_to_dev() macro

Update remaining users and remove deprecated handle_to_dev() macro

CC: Harald Welte <laforge@gnumonks.org>
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/char/pcmcia/cm4000_cs.c            | 2 +-
 drivers/char/pcmcia/cm4040_cs.c            | 6 +++---
 drivers/net/pcmcia/3c574_cs.c              | 2 +-
 drivers/net/pcmcia/3c589_cs.c              | 2 +-
 drivers/net/pcmcia/axnet_cs.c              | 2 +-
 drivers/net/pcmcia/com20020_cs.c           | 2 +-
 drivers/net/pcmcia/fmvj18x_cs.c            | 2 +-
 drivers/net/pcmcia/ibmtr_cs.c              | 2 +-
 drivers/net/pcmcia/nmclan_cs.c             | 2 +-
 drivers/net/pcmcia/pcnet_cs.c              | 2 +-
 drivers/net/pcmcia/smc91c92_cs.c           | 2 +-
 drivers/net/pcmcia/xirc2ps_cs.c            | 2 +-
 drivers/net/wireless/airo_cs.c             | 2 +-
 drivers/net/wireless/atmel_cs.c            | 4 ++--
 drivers/net/wireless/hostap/hostap_cs.c    | 2 +-
 drivers/net/wireless/libertas/if_cs.c      | 4 ++--
 drivers/net/wireless/netwave_cs.c          | 2 +-
 drivers/net/wireless/orinoco/orinoco_cs.c  | 2 +-
 drivers/net/wireless/orinoco/spectrum_cs.c | 2 +-
 drivers/net/wireless/ray_cs.c              | 2 +-
 drivers/net/wireless/wavelan_cs.c          | 2 +-
 drivers/net/wireless/wl3501_cs.c           | 2 +-
 drivers/serial/serial_cs.c                 | 2 +-
 drivers/usb/host/sl811_cs.c                | 2 +-
 include/pcmcia/ds.h                        | 3 ---
 sound/pcmcia/pdaudiocf/pdaudiocf.c         | 2 +-
 sound/pcmcia/vx/vxpocket.c                 | 2 +-
 27 files changed, 30 insertions(+), 33 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 1611c4fe97f..2db4c0a29b0 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -45,7 +45,7 @@
 
 /* #define ATR_CSUM */
 
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
+#define reader_to_dev(x)	(&x->p_dev->dev)
 
 /* n (debug level) is ignored */
 /* additional debug output may be enabled by re-compiling with
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 38790db561a..a6a70e476be 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -39,7 +39,7 @@
 #include "cm4040_cs.h"
 
 
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
+#define reader_to_dev(x)	(&x->p_dev->dev)
 
 /* n (debug level) is ignored */
 /* additional debug output may be enabled by re-compiling with
@@ -539,7 +539,7 @@ static int cm4040_config_check(struct pcmcia_device *p_dev,
 	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
 
 	rc = pcmcia_request_io(p_dev, &p_dev->io);
-	dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+	dev_printk(KERN_INFO, &p_dev->dev,
 		   "pcmcia_request_io returned 0x%x\n", rc);
 	return rc;
 }
@@ -561,7 +561,7 @@ static int reader_config(struct pcmcia_device *link, int devno)
 
 	fail_rc = pcmcia_request_configuration(link, &link->conf);
 	if (fail_rc != 0) {
-		dev_printk(KERN_INFO, &handle_to_dev(link),
+		dev_printk(KERN_INFO, &link->dev,
 			   "pcmcia_request_configuration failed 0x%x\n",
 			   fail_rc);
 		goto cs_release;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index dbef5d9cc9d..8b65e18ab23 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -449,7 +449,7 @@ static int tc574_config(struct pcmcia_device *link)
 	}
 
 	link->dev_node = &lp->node;
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 
 	if (register_netdev(dev) != 0) {
 		printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 6eac62b7143..c43c21ddb2d 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -316,7 +316,7 @@ static int tc589_config(struct pcmcia_device *link)
 	printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
     
     link->dev_node = &lp->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5af2ccfdb52..0552dddd587 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -400,7 +400,7 @@ static int axnet_config(struct pcmcia_device *link)
 
     info->phy_id = (i < 32) ? i : -1;
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 9a2e5006570..51e9cb0a6d1 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -302,7 +302,7 @@ static int com20020_config(struct pcmcia_device *link)
     lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     i = com20020_found(dev, 0);	/* calls register_netdev */
     
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 85f7c456270..9b5ca37c668 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -532,7 +532,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
     lp->cardtype = cardtype;
     link->dev_node = &lp->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 14fe5fa35d8..76706e12d73 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -287,7 +287,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     ibmtr_hw_setup(dev, mmiobase);
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     i = ibmtr_probe_card(dev);
     if (i != 0) {
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index a5363483ec6..2d0c6f93ed8 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -701,7 +701,7 @@ static int nmclan_config(struct pcmcia_device *link)
     printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
 
   link->dev_node = &lp->node;
-  SET_NETDEV_DEV(dev, &handle_to_dev(link));
+  SET_NETDEV_DEV(dev, &link->dev);
 
   i = register_netdev(dev);
   if (i != 0) {
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index d06a0ce7cb8..30baee7b86a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -646,7 +646,7 @@ static int pcnet_config(struct pcmcia_device *link)
 	mii_phy_probe(dev);
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index c6ca3764ab6..2e795de06cb 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -964,7 +964,7 @@ static int smc91c92_config(struct pcmcia_device *link)
     }
 
     link->dev_node = &smc->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 265852ab1a2..f75ac716390 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -992,7 +992,7 @@ xirc2ps_config(struct pcmcia_device * link)
 	do_reset(dev, 1); /* a kludge to make the cem56 work */
 
     link->dev_node = &local->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if ((err=register_netdev(dev))) {
 	printk(KNOT_XIRC "register_netdev() failed\n");
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 34d775c18a3..7d3a96fdf5a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -322,7 +322,7 @@ static int airo_config(struct pcmcia_device *link)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
 		init_airo_card(link->irq.AssignedIRQ,
-			       link->io.BasePort1, 1, &handle_to_dev(link));
+			       link->io.BasePort1, 1, &link->dev);
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 78385722a76..18a58b85922 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -260,7 +260,7 @@ static int atmel_config(struct pcmcia_device *link)
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
-	did = dev_get_drvdata(&handle_to_dev(link));
+	did = dev_get_drvdata(&link->dev);
 
 	dev_dbg(&link->dev, "atmel_config\n");
 
@@ -309,7 +309,7 @@ static int atmel_config(struct pcmcia_device *link)
 		init_atmel_card(link->irq.AssignedIRQ,
 				link->io.BasePort1,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
-				&handle_to_dev(link),
+				&link->dev,
 				card_present,
 				link);
 	if (!((local_info_t*)link->priv)->eth_dev)
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ca3ab849ac0..243e912729b 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -623,7 +623,7 @@ static int prism2_config(struct pcmcia_device *link)
 
 	/* Need to allocate net_device before requesting IRQ handler */
 	dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
-				     &handle_to_dev(link));
+				     &link->dev);
 	if (dev == NULL)
 		goto failed;
 	link->priv = dev;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index cb40c386fc7..f2b16559b68 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -590,7 +590,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 
 	/* TODO: make firmware file configurable */
 	ret = request_firmware(&fw, "libertas_cs_helper.fw",
-		&handle_to_dev(card->p_dev));
+		&card->p_dev->dev);
 	if (ret) {
 		lbs_pr_err("can't load helper firmware\n");
 		ret = -ENODEV;
@@ -663,7 +663,7 @@ static int if_cs_prog_real(struct if_cs_card *card)
 
 	/* TODO: make firmware file configurable */
 	ret = request_firmware(&fw, "libertas_cs.fw",
-		&handle_to_dev(card->p_dev));
+		&card->p_dev->dev);
 	if (ret) {
 		lbs_pr_err("can't load firmware\n");
 		ret = -ENODEV;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index bd4eff79bd1..f5333b7d222 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -773,7 +773,7 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
 
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index da626ec663d..688b3982345 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -109,7 +109,7 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;
 
-	priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+	priv = alloc_orinocodev(sizeof(*card), &link->dev,
 				orinoco_cs_hard_reset, NULL);
 	if (!priv)
 		return -ENOMEM;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 700010e9e34..c609371d152 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -182,7 +182,7 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;
 
-	priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+	priv = alloc_orinocodev(sizeof(*card), &link->dev,
 				spectrum_cs_hard_reset,
 				spectrum_cs_stop_firmware);
 	if (!priv)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 66e2d10cd75..5e0f4c3eac3 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -488,7 +488,7 @@ static int ray_config(struct pcmcia_device *link)
 		return -ENODEV;
 	}
 
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 	i = register_netdev(dev);
 	if (i != 0) {
 		printk("ray_config register_netdev() failed\n");
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index f8c5166fffe..df3579aef50 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3899,7 +3899,7 @@ wv_pcmcia_config(struct pcmcia_device *	link)
 	     lp->mem, dev->irq, (u_int) dev->base_addr);
 #endif
 
-      SET_NETDEV_DEV(dev, &handle_to_dev(link));
+      SET_NETDEV_DEV(dev, &link->dev);
       i = register_netdev(dev);
       if(i != 0)
 	{
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 7e8e269b4cb..9a956c78673 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1975,7 +1975,7 @@ static int wl3501_config(struct pcmcia_device *link)
 
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 	if (register_netdev(dev)) {
 		printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
 		goto failed;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 3b31bee8576..8d651a61845 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -387,7 +387,7 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 	port.irq = irq;
 	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 	port.uartclk = 1843200;
-	port.dev = &handle_to_dev(handle);
+	port.dev = &handle->dev;
 	if (buggy_uart)
 		port.flags |= UPF_BUGGY_UART;
 
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 46077420dea..f87aba6db4e 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -185,7 +185,7 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 
 static int sl811_cs_config(struct pcmcia_device *link)
 {
-	struct device		*parent = &handle_to_dev(link);
+	struct device		*parent = &link->dev;
 	local_info_t		*dev = link->priv;
 	int			ret;
 
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index d6c55fdf8d0..d403c12f797 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -138,9 +138,6 @@ struct pcmcia_device {
 #define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
 #define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv)
 
-/* deprecated -- don't use! */
-#define handle_to_dev(handle) (handle->dev)
-
 
 /*
  * CIS access.
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 64b859925c0..447aaaee3be 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -131,7 +131,7 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
 		return err;
 	}
 
-	snd_card_set_dev(card, &handle_to_dev(link));
+	snd_card_set_dev(card, &link->dev);
 
 	pdacf->index = i;
 	card_list[i] = card;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 1492744ad67..5a5db48a91a 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -244,7 +244,7 @@ static int vxpocket_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	chip->dev = &handle_to_dev(link);
+	chip->dev = &link->dev;
 	snd_card_set_dev(chip->card, chip->dev);
 
 	if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
-- 
cgit v1.2.3-70-g09d2


From 5fa9167a1bf5f5a4b7282f5e7ac56a4a5a1fa044 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sun, 8 Nov 2009 17:24:46 +0100
Subject: pcmcia: rework the irq_req_t typedef

Most of the irq_req_t typedef'd struct can be re-worked quite
easily:

(1) IRQInfo2 was unused in any case, so drop it.

(2) IRQInfo1 was used write-only, so drop it.

(3) Instance (private data to be passed to the IRQ handler):
	Most PCMCIA drivers using pcmcia_request_irq() to actually
	register an IRQ handler set the "dev_id" to the same pointer
	as the "priv" pointer in struct pcmcia_device. Modify the two
	exceptions (ipwireless, ibmtr_cs) to also work this waym and
	set the IRQ handler's "dev_id" to p_dev->priv unconditionally.

(4) Handler is to be of type irq_handler_t.

(5) Handler != NULL already tells whether an IRQ handler is present.
	Therefore, we do not need the IRQ_HANDLER_PRESENT flag in
	irq_req_t.Attributes.

CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: Jaroslav Kysela <perex@perex.cz>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Karsten Keil <isdn@linux-pingi.de>
for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/ata/pata_pcmcia.c                        |  1 -
 drivers/bluetooth/bluecard_cs.c                  |  4 +---
 drivers/bluetooth/bt3c_cs.c                      |  4 +---
 drivers/bluetooth/btuart_cs.c                    |  4 +---
 drivers/bluetooth/dtl1_cs.c                      |  4 +---
 drivers/char/pcmcia/ipwireless/hardware.c        |  8 ++++----
 drivers/char/pcmcia/ipwireless/main.c            |  6 +-----
 drivers/char/pcmcia/synclink_cs.c                |  3 ---
 drivers/ide/ide-cs.c                             |  1 -
 drivers/isdn/hardware/avm/avm_cs.c               |  2 --
 drivers/isdn/hisax/avma1_cs.c                    |  2 --
 drivers/isdn/hisax/elsa_cs.c                     |  1 -
 drivers/isdn/hisax/sedlbauer_cs.c                |  1 -
 drivers/isdn/hisax/teles_cs.c                    |  1 -
 drivers/net/pcmcia/3c574_cs.c                    |  4 +---
 drivers/net/pcmcia/3c589_cs.c                    |  4 +---
 drivers/net/pcmcia/axnet_cs.c                    |  1 -
 drivers/net/pcmcia/com20020_cs.c                 |  8 +++-----
 drivers/net/pcmcia/fmvj18x_cs.c                  |  6 ++----
 drivers/net/pcmcia/ibmtr_cs.c                    | 13 +++++++++----
 drivers/net/pcmcia/nmclan_cs.c                   |  4 +---
 drivers/net/pcmcia/pcnet_cs.c                    |  1 -
 drivers/net/pcmcia/smc91c92_cs.c                 |  8 +++-----
 drivers/net/pcmcia/xirc2ps_cs.c                  |  3 ---
 drivers/net/wireless/airo_cs.c                   |  1 -
 drivers/net/wireless/atmel_cs.c                  |  1 -
 drivers/net/wireless/b43/pcmcia.c                |  2 --
 drivers/net/wireless/hostap/hostap_cs.c          |  5 +----
 drivers/net/wireless/libertas/if_cs.c            |  1 -
 drivers/net/wireless/netwave_cs.c                |  5 +----
 drivers/net/wireless/orinoco/orinoco_cs.c        |  4 +---
 drivers/net/wireless/orinoco/spectrum_cs.c       |  4 +---
 drivers/net/wireless/ray_cs.c                    |  4 +---
 drivers/net/wireless/wavelan_cs.c                |  5 ++---
 drivers/net/wireless/wl3501_cs.c                 |  5 ++---
 drivers/parport/parport_cs.c                     |  1 -
 drivers/pcmcia/pcmcia_resource.c                 | 18 +++++++++---------
 drivers/scsi/pcmcia/aha152x_stub.c               |  1 -
 drivers/scsi/pcmcia/fdomain_stub.c               |  1 -
 drivers/scsi/pcmcia/nsp_cs.c                     |  4 +---
 drivers/scsi/pcmcia/qlogic_stub.c                |  1 -
 drivers/scsi/pcmcia/sym53c500_cs.c               |  1 -
 drivers/serial/serial_cs.c                       |  1 -
 drivers/staging/comedi/drivers/cb_das16_cs.c     |  1 -
 drivers/staging/comedi/drivers/das08_cs.c        |  1 -
 drivers/staging/comedi/drivers/ni_daq_700.c      |  1 -
 drivers/staging/comedi/drivers/ni_daq_dio24.c    |  1 -
 drivers/staging/comedi/drivers/ni_labpc_cs.c     |  1 -
 drivers/staging/comedi/drivers/ni_mio_cs.c       |  4 ----
 drivers/staging/comedi/drivers/quatech_daqp_cs.c |  4 +---
 drivers/usb/host/sl811_cs.c                      |  1 -
 include/pcmcia/cs.h                              | 14 ++++++++------
 sound/pcmcia/pdaudiocf/pdaudiocf.c               |  4 +---
 sound/pcmcia/vx/vxpocket.c                       |  4 +---
 54 files changed, 59 insertions(+), 136 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 5f94e214e17..1b392c9e853 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -268,7 +268,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 	pdev->io.IOAddrLines = 3;
 	pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	pdev->conf.Attributes = CONF_ENABLE_IRQ;
 	pdev->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 1e0c4d82297..2acdc605cb4 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -867,11 +867,9 @@ static int bluecard_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = bluecard_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 9787fda45d8..d814a2755cc 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -659,11 +659,9 @@ static int bt3c_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = bt3c_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index f44d75217b2..d339464dc15 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -588,11 +588,9 @@ static int btuart_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = btuart_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 7cd8614a8ea..4f02a6f3c98 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -573,11 +573,9 @@ static int dtl1_probe(struct pcmcia_device *link)
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = dtl1_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 4c1820cad71..99cffdab105 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -1213,12 +1213,12 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq,
 
 irqreturn_t ipwireless_interrupt(int irq, void *dev_id)
 {
-	struct ipw_hardware *hw = dev_id;
+	struct ipw_dev *ipw = dev_id;
 
-	if (hw->hw_version == HW_VERSION_1)
-		return ipwireless_handle_v1_interrupt(irq, hw);
+	if (ipw->hardware->hw_version == HW_VERSION_1)
+		return ipwireless_handle_v1_interrupt(irq, ipw->hardware);
 	else
-		return ipwireless_handle_v2_v3_interrupt(irq, hw);
+		return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware);
 }
 
 static void flush_packets_to_hw(struct ipw_hardware *hw)
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 082146a26c8..dff24dae148 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -93,8 +93,6 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 	p_dev->io.NumPorts1 = cfg->io.win[0].len;
 	p_dev->io.IOAddrLines = 16;
 
-	p_dev->irq.IRQInfo1 = cfg->irq.IRQInfo1;
-
 	/* 0x40 causes it to generate level mode interrupts. */
 	/* 0x04 enables IREQ pin. */
 	p_dev->conf.ConfigIndex = cfg->index | 0x44;
@@ -197,9 +195,8 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = ipwireless_interrupt;
-	link->irq.Instance = ipw->hardware;
 
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
 
@@ -315,7 +312,6 @@ static int ipwireless_attach(struct pcmcia_device *link)
 
 	ipw->link = link;
 	link->priv = ipw;
-	link->irq.Instance = ipw;
 
 	/* Link this device into our device list. */
 	link->dev_node = &ipw->nodes[0];
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 09b2590adb8..c31a0d913d3 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -554,7 +554,6 @@ static int mgslpc_probe(struct pcmcia_device *link)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1   = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
 
     link->conf.Attributes = 0;
@@ -609,9 +608,7 @@ static int mgslpc_config(struct pcmcia_device *link)
     link->conf.ConfigIndex = 8;
     link->conf.Present = PRESENT_OPTION;
 
-    link->irq.Attributes |= IRQ_HANDLE_PRESENT;
     link->irq.Handler     = mgslpc_isr;
-    link->irq.Instance    = info;
 
     ret = pcmcia_request_irq(link, &link->irq);
     if (ret)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 6cee6c8d078..dd6396384c2 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -103,7 +103,6 @@ static int ide_probe(struct pcmcia_device *link)
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.IOAddrLines = 3;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index d388eadb9fd..5a6ae646a63 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -111,8 +111,6 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 6d963f9a09c..f9bdff39cf4 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -123,8 +123,6 @@ static int avma1cs_probe(struct pcmcia_device *p_dev)
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index cdcd2979fcd..a2f709f5397 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -138,7 +138,6 @@ static int elsa_cs_probe(struct pcmcia_device *link)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 331716fc6b3..af5d393cc2d 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -145,7 +145,6 @@ static int sedlbauer_probe(struct pcmcia_device *link)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
 
     /*
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 7b11c15b3a9..ea705394ce2 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -128,7 +128,6 @@ static int teles_probe(struct pcmcia_device *link)
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 8b65e18ab23..17a27225cc9 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -283,10 +283,8 @@ static int tc574_probe(struct pcmcia_device *link)
 	spin_lock_init(&lp->window_lock);
 	link->io.NumPorts1 = 32;
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = &el3_interrupt;
-	link->irq.Instance = dev;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index c43c21ddb2d..6f8d7e2e592 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -194,10 +194,8 @@ static int tc589_probe(struct pcmcia_device *link)
     spin_lock_init(&lp->lock);
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &el3_interrupt;
-    link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 0552dddd587..800597b82d1 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -170,7 +170,6 @@ static int axnet_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = dev;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 51e9cb0a6d1..21d9c9d815d 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -164,11 +164,10 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     p_dev->io.NumPorts1 = 16;
     p_dev->io.IOAddrLines = 16;
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
-    p_dev->irq.Instance = info->dev = dev;
+    info->dev = dev;
     p_dev->priv = info;
 
     return com20020_config(p_dev);
@@ -275,9 +274,8 @@ static int com20020_config(struct pcmcia_device *link)
     ioaddr = dev->base_addr = link->io.BasePort1;
     dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
-    dev_dbg(&link->dev, "request IRQ %d (%Xh/%Xh)\n",
-	   link->irq.AssignedIRQ,
-	   link->irq.IRQInfo1, link->irq.IRQInfo2);
+    dev_dbg(&link->dev, "request IRQ %d\n",
+	    link->irq.AssignedIRQ);
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0)
     {
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 9b5ca37c668..6e3e1ced6db 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -255,10 +255,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     link->io.IOAddrLines = 5;
 
     /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &fjn_interrupt;
-    link->irq.Instance = dev;
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -428,7 +426,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
     if (link->io.NumPorts2 != 0) {
     	link->irq.Attributes =
-		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 	ret = mfc_try_io_port(link);
 	if (ret != 0) goto failed;
     } else if (cardtype == UNGERMANN) {
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 76706e12d73..37f4a6fdc3e 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -119,6 +119,12 @@ static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
 };
 
+static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
+	ibmtr_dev_t *info = dev_id;
+	struct net_device *dev = info->dev;
+	return tok_interrupt(irq, dev);
+};
+
 /*======================================================================
 
     ibmtr_attach() creates an "instance" of the driver, allocating
@@ -150,14 +156,13 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts1 = 4;
     link->io.IOAddrLines = 16;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->irq.Handler = &tok_interrupt;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Handler = ibmtr_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
-    link->irq.Instance = info->dev = dev;
+    info->dev = dev;
 
     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 2d0c6f93ed8..dae5ef6b260 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -463,10 +463,8 @@ static int nmclan_probe(struct pcmcia_device *link)
     link->io.NumPorts1 = 32;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 5;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.Handler = &mace_interrupt;
-    link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 30baee7b86a..de2d1008563 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -266,7 +266,6 @@ static int pcnet_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 2e795de06cb..9e0da370912 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -329,10 +329,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 4;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &smc_interrupt;
-    link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -456,7 +454,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
     link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
     link->io.IOAddrLines = 16;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -655,7 +653,7 @@ static int osi_config(struct pcmcia_device *link)
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
     link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
     link->io.NumPorts1 = 64;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index f75ac716390..fe504b7f369 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -556,7 +556,6 @@ xirc2ps_probe(struct pcmcia_device *link)
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->irq.Handler = xirc2ps_interrupt;
-    link->irq.Instance = dev;
 
     /* Fill in card specific entries */
     dev->netdev_ops = &netdev_ops;
@@ -835,8 +834,6 @@ xirc2ps_config(struct pcmcia_device * link)
 
     link->io.IOAddrLines =10;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    link->irq.Attributes = IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     if (local->modem) {
 	int pass;
 
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 7d3a96fdf5a..f6036fb4231 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -134,7 +134,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 
 	/* Interrupt setup */
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	p_dev->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 18a58b85922..32407911842 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -143,7 +143,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 
 	/* Interrupt setup */
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	p_dev->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 2588358294b..984174bc7b0 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -98,9 +98,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 		goto err_disable;
 
 	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	dev->irq.Handler = NULL; /* The handler is registered later. */
-	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
 	if (res != 0)
 		goto err_disable;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 243e912729b..c9640a3e02c 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -641,11 +641,8 @@ static int prism2_config(struct pcmcia_device *link)
 	 * irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING |
-				       IRQ_HANDLE_PRESENT;
-		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+		link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 		link->irq.Handler = prism2_interrupt;
-		link->irq.Instance = dev;
 		ret = pcmcia_request_irq(link, &link->irq);
 		if (ret)
 			goto failed;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index f2b16559b68..b1d84592b95 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -837,7 +837,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = NULL;
-	p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
 
 	p_dev->conf.Attributes = 0;
 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index f5333b7d222..e61e6b9440a 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -384,8 +384,7 @@ static int netwave_probe(struct pcmcia_device *link)
     link->io.IOAddrLines = 5;
     
     /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &netwave_interrupt;
     
     /* General socket configuration */
@@ -404,8 +403,6 @@ static int netwave_probe(struct pcmcia_device *link)
 
     dev->watchdog_timeo = TX_TIMEOUT;
 
-    link->irq.Instance = dev;
-
     return netwave_pcmcia_config( link);
 } /* netwave_attach */
 
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 688b3982345..f27bb8367c9 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -120,10 +120,8 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	link->priv = priv;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = priv;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c609371d152..59bda240fdc 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -194,10 +194,8 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	link->priv = priv;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = priv;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 5e0f4c3eac3..91213f9e2c4 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -323,8 +323,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->io.IOAddrLines = 5;
 
 	/* Interrupt setup. For PCMCIA, driver takes what's given */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = &ray_interrupt;
 
 	/* General socket configuration */
@@ -333,7 +332,6 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->conf.ConfigIndex = 1;
 
 	p_dev->priv = dev;
-	p_dev->irq.Instance = dev;
 
 	local->finder = p_dev;
 	local->card_status = CARD_INSERTED;
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index df3579aef50..33918fd5b23 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4438,8 +4438,7 @@ wavelan_probe(struct pcmcia_device *p_dev)
   p_dev->io.IOAddrLines = 3;
 
   /* Interrupt setup */
-  p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-  p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+  p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
   p_dev->irq.Handler = wavelan_interrupt;
 
   /* General socket configuration */
@@ -4451,7 +4450,7 @@ wavelan_probe(struct pcmcia_device *p_dev)
   if (!dev)
       return -ENOMEM;
 
-  p_dev->priv = p_dev->irq.Instance = dev;
+  p_dev->priv = dev;
 
   lp = netdev_priv(dev);
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 9a956c78673..5f0401a52cf 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1898,8 +1898,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->io.IOAddrLines	= 5;
 
 	/* Interrupt setup */
-	p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	p_dev->irq.IRQInfo1	= IRQ_LEVEL_ID;
+	p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = wl3501_interrupt;
 
 	/* General socket configuration */
@@ -1922,7 +1921,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	dev->wireless_handlers	= &wl3501_handler_def;
 	SET_ETHTOOL_OPS(dev, &ops);
 	netif_stop_queue(dev);
-	p_dev->priv = p_dev->irq.Instance = dev;
+	p_dev->priv = dev;
 
 	return wl3501_config(p_dev);
 out_link:
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index e56a4dea671..7dd370fa343 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -106,7 +106,6 @@ static int parport_probe(struct pcmcia_device *link)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 1cf7d54fb7e..a8bf8c1b45e 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -383,8 +383,8 @@ static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 		s->irq.AssignedIRQ = 0;
 	}
 
-	if (req->Attributes & IRQ_HANDLE_PRESENT) {
-		free_irq(req->AssignedIRQ, req->Instance);
+	if (req->Handler) {
+		free_irq(req->AssignedIRQ, p_dev->priv);
 	}
 
 #ifdef CONFIG_PCMCIA_PROBE
@@ -664,7 +664,7 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 	/* if the underlying IRQ infrastructure allows for it, only allocate
 	 * the IRQ, but do not enable it
 	 */
-	if (!(req->Attributes & IRQ_HANDLE_PRESENT))
+	if (!(req->Handler))
 		type |= IRQ_NOAUTOEN;
 #endif /* IRQ_NOAUTOEN */
 
@@ -674,7 +674,7 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 	} else {
 		int try;
 		u32 mask = s->irq_mask;
-		void *data = &p_dev->dev.driver; /* something unique to this device */
+		void *data = p_dev; /* something unique to this device */
 
 		for (try = 0; try < 64; try++) {
 			irq = try % 32;
@@ -691,12 +691,12 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 			 * registering a dummy handle works, i.e. if the IRQ isn't
 			 * marked as used by the kernel resource management core */
 			ret = request_irq(irq,
-					  (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Handler : test_action,
+					  (req->Handler) ? req->Handler : test_action,
 					  type,
 					  p_dev->devname,
-					  (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Instance : data);
+					  (req->Handler) ? p_dev->priv : data);
 			if (!ret) {
-				if (!(req->Attributes & IRQ_HANDLE_PRESENT))
+				if (!req->Handler)
 					free_irq(irq, data);
 				break;
 			}
@@ -713,9 +713,9 @@ int pcmcia_request_irq(struct pcmcia_device *p_dev, irq_req_t *req)
 		irq = s->pci_irq;
 	}
 
-	if (ret && (req->Attributes & IRQ_HANDLE_PRESENT)) {
+	if (ret && req->Handler) {
 		ret = request_irq(irq, req->Handler, type,
-				  p_dev->devname, req->Instance);
+				  p_dev->devname, p_dev->priv);
 		if (ret) {
 			dev_printk(KERN_INFO, &s->dev,
 				"request_irq() failed\n");
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 4329e4e5043..528733b4a39 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -106,7 +106,6 @@ static int aha152x_probe(struct pcmcia_device *link)
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 10;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 5792b55c9d3..91404068407 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -89,7 +89,6 @@ static int fdomain_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 9dfd6f510b6..c2341af587a 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1564,12 +1564,10 @@ static int nsp_cs_probe(struct pcmcia_device *link)
 	link->io.IOAddrLines	 = 10;	/* not used */
 
 	/* Interrupt setup */
-	link->irq.Attributes	 = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1	 = IRQ_LEVEL_ID;
+	link->irq.Attributes	 = IRQ_TYPE_EXCLUSIVE;
 
 	/* Interrupt handler */
 	link->irq.Handler	 = &nspintr;
-	link->irq.Instance       = info;
 	link->irq.Attributes     |= IRQF_SHARED;
 
 	/* General socket configuration */
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 65d7ad58433..f85f094870b 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -162,7 +162,6 @@ static int qlogic_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 851a41ce4f0..e7564d8f0cb 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -867,7 +867,6 @@ SYM53C500_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 8d651a61845..5d6f947ef7f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -334,7 +334,6 @@ static int serial_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 9e758027efe..39923cb388b 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -703,7 +703,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link)
 	/* Initialize the pcmcia_device structure */
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	link->conf.Attributes = 0;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 384a77a37c2..9b945e5fdd3 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -173,7 +173,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 7328a84ac50..ef5e1183d47 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -503,7 +503,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 505631553ef..9017be3a92f 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -254,7 +254,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 7fb5058ad43..7d514b3ee75 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -230,7 +230,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_PULSE_ID;
 	link->irq.Handler = NULL;
 
 	/*
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index ca7ab4abdc2..d692f4bb47e 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -274,7 +274,6 @@ static int cs_attach(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 	link->io.NumPorts1 = 16;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -325,9 +324,6 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
 	p_dev->io.NumPorts2 = 0;
 
-	p_dev->irq.IRQInfo1 = cfg->irq.IRQInfo1;
-	p_dev->irq.IRQInfo2 = cfg->irq.IRQInfo2;
-
 	for (base = 0x000; base < 0x400; base += 0x20) {
 		p_dev->io.BasePort1 = base;
 		ret = pcmcia_request_io(p_dev, &p_dev->io);
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 48e7c27ed87..5256fd93316 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -1041,10 +1041,8 @@ static int daqp_cs_attach(struct pcmcia_device *link)
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = daqp_interrupt;
-	link->irq.Instance = local;
 
 	/*
 	   General socket configuration defaults can go here.  In this
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index f87aba6db4e..39d253e841f 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -243,7 +243,6 @@ static int sl811_cs_probe(struct pcmcia_device *link)
 
 	/* Initialize */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	link->conf.Attributes = 0;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 904468a191e..afc2bfb9e91 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -15,6 +15,10 @@
 #ifndef _LINUX_CS_H
 #define _LINUX_CS_H
 
+#ifdef __KERNEL__
+#include <linux/interrupt.h>
+#endif
+
 /* For AccessConfigurationRegister */
 typedef struct conf_reg_t {
     u_char	Function;
@@ -111,11 +115,9 @@ typedef struct io_req_t {
 
 /* For RequestIRQ and ReleaseIRQ */
 typedef struct irq_req_t {
-    u_int	Attributes;
-    u_int	AssignedIRQ;
-    u_int	IRQInfo1, IRQInfo2; /* IRQInfo2 is ignored */
-    void	*Handler;
-    void	*Instance;
+	u_int		Attributes;
+	u_int		AssignedIRQ;
+	irq_handler_t	Handler;
 } irq_req_t;
 
 /* Attributes for RequestIRQ and ReleaseIRQ */
@@ -125,7 +127,7 @@ typedef struct irq_req_t {
 #define IRQ_TYPE_DYNAMIC_SHARING	0x02
 #define IRQ_FORCED_PULSE		0x04
 #define IRQ_FIRST_SHARED		0x08
-#define IRQ_HANDLE_PRESENT		0x10
+//#define IRQ_HANDLE_PRESENT		0x10
 #define IRQ_PULSE_ALLOCATED		0x100
 
 /* Bits in IRQInfo1 field */
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 447aaaee3be..7717e01fc07 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -142,12 +142,10 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.NumPorts1 = 16;
 
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT | IRQ_FORCED_PULSE;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_FORCED_PULSE;
 	// link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-	link->irq.IRQInfo1 = 0 /* | IRQ_LEVEL_ID */;
 	link->irq.Handler = pdacf_interrupt;
-	link->irq.Instance = pdacf;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 5a5db48a91a..7be3b335704 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -161,11 +161,9 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.NumPorts1 = 16;
 
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
 
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = &snd_vx_irq_handler;
-	link->irq.Instance = chip;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
-- 
cgit v1.2.3-70-g09d2


From b037179f7a4fff7bd8279b0568a7dc663ebc9d15 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Sun, 15 Nov 2009 05:42:18 +0100
Subject: bcm63xx_uart: Fix serial driver compile breakage.

The driver missed a small API change while sitting in Ralf's tree, this
patch makes it compile again.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/bcm63xx_uart.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/serial')

diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6e906..37ad0c44993 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port)
 	 * higher than fifo size anyway since we're much faster than
 	 * serial port */
 	max_count = 32;
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	do {
 		unsigned int iestat, c, cstat;
 		char flag;
@@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port)
 		return;
 	}
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit))
 		goto txq_empty;
 
-- 
cgit v1.2.3-70-g09d2


From 16173c7c2d79da7eb89b41acfdebd74b130f4339 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 24 Nov 2009 10:22:41 +0000
Subject: tty/of_serial: add missing ns16550a id

Many boards have a bug-free ns16550 compatible serial port, which we should
register as PORT_16550A. This introduces a new value "ns16550a" for the
compatible property of of_serial to let a firmware choose that model instead
of using the crippled PORT_16550 mode.

Reported-by: Alon Ziv <alonz@nolaviz.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/of_serial.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/serial')

diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 02406ba6da1..cdf172eda2e 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev)
 static struct of_device_id __devinitdata of_platform_serial_table[] = {
 	{ .type = "serial", .compatible = "ns8250",   .data = (void *)PORT_8250, },
 	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
+	{ .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
 	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
 	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
-- 
cgit v1.2.3-70-g09d2


From ccae941ee2de58b9391f4e166b1bad33fcbfc119 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Fri, 13 Nov 2009 22:54:14 +0000
Subject: ARM: S3C: Update Simtec copyright statements from , to - [2]

There are a number of statements of the form A, B or A, B, C where
the numbers A,B,C are not consecutive. However, referencing [1] it
is the correct thing to replace these with A-B or A-C as apropriate.

[1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices
    section 4iii 'Year of publication'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2400/include/mach/map.h           | 2 +-
 arch/arm/mach-s3c2410/bast-irq.c                   | 2 +-
 arch/arm/mach-s3c2410/cpu-freq.c                   | 2 +-
 arch/arm/mach-s3c2410/include/mach/dma.h           | 2 +-
 arch/arm/mach-s3c2410/include/mach/gpio-fns.h      | 2 +-
 arch/arm/mach-s3c2410/include/mach/uncompress.h    | 3 +--
 arch/arm/mach-s3c2410/mach-bast.c                  | 4 ++--
 arch/arm/mach-s3c2410/mach-vr1000.c                | 2 +-
 arch/arm/mach-s3c2440/mach-osiris.c                | 2 +-
 arch/arm/mach-s3c24a0/include/mach/map.h           | 2 +-
 arch/arm/plat-s3c/dma.c                            | 2 +-
 arch/arm/plat-s3c/include/plat/dma.h               | 2 +-
 arch/arm/plat-s3c/include/plat/iic.h               | 2 +-
 arch/arm/plat-s3c/pm-check.c                       | 2 +-
 arch/arm/plat-s3c/pm.c                             | 2 +-
 arch/arm/plat-s3c24xx/clock-dclk.c                 | 2 +-
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 2 +-
 arch/arm/plat-s3c24xx/include/plat/regs-dma.h      | 2 +-
 arch/arm/plat-s3c24xx/pm.c                         | 2 +-
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c           | 2 +-
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           | 2 +-
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c            | 2 +-
 arch/arm/plat-s3c24xx/s3c244x-clock.c              | 2 +-
 drivers/serial/s3c2410.c                           | 2 +-
 drivers/serial/s3c2412.c                           | 2 +-
 drivers/serial/s3c2440.c                           | 2 +-
 drivers/serial/s3c24a0.c                           | 2 +-
 drivers/serial/samsung.c                           | 2 +-
 drivers/serial/samsung.h                           | 2 +-
 29 files changed, 30 insertions(+), 31 deletions(-)

(limited to 'drivers/serial')

diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540edc8..3fd889200e9 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index d5ab9adc738..217b102866d 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d1186877d0..75189df995a 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687009e..08ac5f96c01 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff13858..035a493952d 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c9432103750..72f756c5e50 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 9705d84233c..c425eefb9f8 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -66,7 +66,7 @@
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", Copyright 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 7611472b5f1..0d61fb57717 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 8af9e9a104a..9b04de2481d 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93ea2b..d88c8b24fe3 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c06af..a995850cd9d 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98f08e..e429d10be3a 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f11574..3083df00dee 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555564d..8eb1f439861 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2c7a0..767470601e5 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217a775..ac061a1bcb3 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120b99e..33d421d78ba 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a216df9..1b0f4c36d38 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253ca02..3620dd29909 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a145cd4..963fb0b4379 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47facb..24993dce10b 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c604f2..976002fb1b8 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f171af..79371091aa3 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
  *
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f0821cae..73f089d3efd 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2410 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8809d..ce75e28e36e 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d340f0..094cc3904b1 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e18bdd..fad6083ca42 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
  *
  * Author: Sandeep Patil <sandeep.patil@azingo.com>
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d9ae7..52e3df113ec 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
  *
  * Driver core for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315969f..1fb22343df4 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
-- 
cgit v1.2.3-70-g09d2