From 759eb040901af60d8a1a2b59b93805521b156cbb Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 21 Nov 2007 17:00:32 +0800 Subject: Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly Output as many bytes as possible in PIO tx handler. This reduce the number of tx interrupts and shorten the delay to handle rx interrupt. So, rx overrun disappears. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 62 +++++++++++------------------------------------ 1 file changed, 14 insertions(+), 48 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ac2a3ef28d5..e059475c91a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -74,7 +74,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else static void bfin_serial_do_work(struct work_struct *work); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -static void local_put_char(struct bfin_serial_port *uart, char ch); #endif static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); @@ -85,6 +84,9 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifndef CONFIG_BF54x + unsigned short ier; +#endif while (!(UART_GET_LSR(uart) & TEMT)) continue; @@ -100,8 +102,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) UART_PUT_LSR(uart, TFI); UART_CLEAR_IER(uart, ETBEI); #else - unsigned short ier; - ier = UART_GET_IER(uart); ier &= ~ETBEI; UART_PUT_IER(uart, ier); @@ -210,23 +210,6 @@ int kgdb_get_debug_char(void) #endif #ifdef CONFIG_SERIAL_BFIN_PIO -static void local_put_char(struct bfin_serial_port *uart, char ch) -{ - unsigned short status; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - - do { - status = UART_GET_LSR(uart); - } while (!(status & THRE)); - - UART_PUT_CHAR(uart, ch); - SSYNC(); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; @@ -236,8 +219,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct pt_regs *regs = get_irq_regs(); #endif - status = UART_GET_LSR(uart); ch = UART_GET_CHAR(uart); + status = UART_GET_LSR(uart); uart->port.icount.rx++; #ifdef CONFIG_KGDB_UART @@ -337,9 +320,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } - local_put_char(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + SSYNC(); + } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); @@ -352,21 +338,11 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) { + while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR)) bfin_serial_rx_chars(uart); - status = UART_GET_LSR(uart); - } spin_unlock(&uart->port.lock); -#else - spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY) - bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } @@ -374,21 +350,11 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) { + if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE)) bfin_serial_tx_chars(uart); - status = UART_GET_LSR(uart); - } spin_unlock(&uart->port.lock); -#else - spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From 1b73351c6afcc3acbf9e29a43ee14b3c9a386503 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 16:45:12 +0800 Subject: [Blackfin] serial driver: Clean up UART DMA code. Start next TX DMA in tx dma handler instead of rx timer handler. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index e059475c91a..3a2aa7e277f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -84,7 +84,7 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) unsigned short ier; #endif @@ -307,7 +307,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - return; } /* * Check the modem control lines before @@ -376,28 +375,26 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) if (!uart->tx_done) return; - uart->tx_done = 0; + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + bfin_serial_stop_tx(&uart->port); + uart->tx_done = 1; + return; + } + if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - uart->tx_done = 1; - return; } + /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); - uart->tx_done = 1; - return; - } - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) @@ -471,8 +468,6 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) int x_pos, pos; int flags = 0; - bfin_serial_dma_tx_chars(uart); - spin_lock_irqsave(&uart->port.lock, flags); x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); if (x_pos == DMA_RX_XCOUNT) @@ -513,9 +508,9 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - if (uart_circ_empty(xmit)) - bfin_serial_stop_tx(&uart->port); uart->tx_done = 1; + + bfin_serial_dma_tx_chars(uart); } spin_unlock(&uart->port.lock); -- cgit v1.2.3-70-g09d2 From 75b780bd99b851682289e7a88763ede5a936edb0 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 17:03:39 +0800 Subject: [Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown. Kernel crash for the serial driver in DMA mode: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3679 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 3a2aa7e277f..838f491c8de 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -704,6 +704,7 @@ static void bfin_serial_shutdown(struct uart_port *port) disable_dma(uart->rx_dma_channel); free_dma(uart->rx_dma_channel); del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); #else #ifdef CONFIG_KGDB_UART if (uart->port.line != CONFIG_KGDB_UART_PORT) -- cgit v1.2.3-70-g09d2 From 99ee7b5f3a68324807650f650f2613bbe281627f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 17:12:55 +0800 Subject: [Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to console on shell restart http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Fix by increasing buffer tail immediately before starting tx dma. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 838f491c8de..007414639e3 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -411,6 +411,10 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); + + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); #else @@ -502,9 +506,6 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif - xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1); - uart->port.icount.tx+=uart->tx_count; - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); -- cgit v1.2.3-70-g09d2 From 4c195ad88b7df54b2e7340dec3446aee6ca84cd1 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sun, 23 Dec 2007 23:18:08 +0800 Subject: [Blackfin] serial driver: fix bug - should not wait for the TFI bit, just clear it when tx stop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 007414639e3..ca9ceaa113a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -95,9 +95,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) disable_dma(uart->tx_dma_channel); #else #ifdef CONFIG_BF54x - /* Waiting for Transmission Finished */ - while (!(UART_GET_LSR(uart) & TFI)) - continue; /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); UART_CLEAR_IER(uart, ETBEI); -- cgit v1.2.3-70-g09d2 From 0bcfd70ea11a5d6f2362be463513a60245a62baf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 19:40:05 +0800 Subject: [Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear Cache the bits of the LSR on systems where the LSR is read-to-clear so that we can safely read the LSR in random places. this fixes older parts where break/framing/parity/overflow was not being detected at all in PIO mode, and this fixes newer parts where break/framing/parity/overflow was being reported all the time without being cleared. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 10 +++++++--- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 1 + include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 19 ++++++++++++++++++- 6 files changed, 80 insertions(+), 7 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ca9ceaa113a..af84984df77 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -216,8 +216,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct pt_regs *regs = get_irq_regs(); #endif - ch = UART_GET_CHAR(uart); status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); uart->port.icount.rx++; #ifdef CONFIG_KGDB_UART @@ -335,7 +337,7 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; spin_lock(&uart->port.lock); - while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR)) + while (UART_GET_LSR(uart) & DR) bfin_serial_rx_chars(uart); spin_unlock(&uart->port.lock); @@ -347,7 +349,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; spin_lock(&uart->port.lock); - if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE)) + if (UART_GET_LSR(uart) & THRE) bfin_serial_tx_chars(uart); spin_unlock(&uart->port.lock); @@ -428,6 +430,8 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) int i, flg, status; status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; if (status & BI) { diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 15dbc21eed8..233c585efc1 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) @@ -58,6 +57,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -76,6 +76,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index 7871d4313f4..b619065ceeb 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -46,6 +45,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -64,6 +64,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 86e45c37983..f18c517cc93 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -58,6 +57,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -76,6 +76,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 3770aa38ee9..8733d47747e 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -32,6 +32,7 @@ #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 7871d4313f4..b619065ceeb 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -46,6 +45,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -64,6 +64,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; -- cgit v1.2.3-70-g09d2 From 8851c71eb97610f0f63121d62345c969f71201a2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 19:48:04 +0800 Subject: [Blackfin] serial driver: rework break flood anomaly handling to be more robust/realistic about what we can actually work around Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 66 ++++++++++++++++++----- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 3 ++ include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 3 ++ 3 files changed, 58 insertions(+), 14 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index af84984df77..50aa3b2a19b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -206,12 +206,20 @@ int kgdb_get_debug_char(void) } #endif +#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif + #ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; - static int in_break = 0; + static struct timeval anomaly_start = { .tv_sec = 0 }; #ifdef CONFIG_KGDB_UART struct pt_regs *regs = get_irq_regs(); #endif @@ -244,28 +252,56 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #endif if (ANOMALY_05000230) { - /* The BF533 family of processors have a nice misbehavior where - * they continuously generate characters for a "single" break. + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. * We have to basically ignore this flood until the "next" valid - * character comes across. All other Blackfin families operate - * properly though. + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. * Note: While Anomaly 05000230 does not directly address this, * the changes that went in for it also fixed this issue. + * That anomaly was fixed in 0.5+ silicon. I like bunnies. */ - if (in_break) { - if (ch != 0) { - in_break = 0; - ch = UART_GET_CHAR(uart); - if (bfin_revid() < 5) - return; - } else - return; + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + anomaly_start.tv_sec = 0; } } if (status & BI) { if (ANOMALY_05000230) - in_break = 1; + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; @@ -778,6 +814,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, quot = uart_get_divisor(port, baud); spin_lock_irqsave(&uart->port.lock, flags); + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + do { lsr = UART_GET_LSR(uart); } while (!(lsr & TEMT)); diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index b619065ceeb..a1b4f4eebd0 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -57,6 +57,9 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #else struct work_struct cts_workqueue; +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS int cts_pin; diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index b619065ceeb..a1b4f4eebd0 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -57,6 +57,9 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #else struct work_struct cts_workqueue; +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS int cts_pin; -- cgit v1.2.3-70-g09d2 From 1ba7a3ee310138015e744444043ce3e947429fce Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 11 Jan 2008 15:56:26 +0800 Subject: [Blackfin] serial driver: use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 27 ++++----------------------- 1 file changed, 4 insertions(+), 23 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 50aa3b2a19b..a07df539e52 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1,30 +1,11 @@ /* - * File: drivers/serial/bfin_5xx.c - * Based on: Based on drivers/serial/sa1100.c - * Author: Aubrey Li + * Blackfin On-Chip Serial Driver * - * Created: - * Description: Driver for blackfin 5xx serial ports + * Copyright 2006-2007 Analog Devices Inc. * - * Modified: - * Copyright 2006 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -- cgit v1.2.3-70-g09d2 From 095455682e29dbbc9f93ad83db459df524524992 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 2 Feb 2008 15:58:30 +0800 Subject: [Blackfin] serial driver: ADSP-BF52x arch/mach support Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b82595cf13e..202fb5c99b8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -686,7 +686,7 @@ config UART0_RTS_PIN config SERIAL_BFIN_UART1 bool "Enable UART1" - depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x) + depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) help Enable UART1 -- cgit v1.2.3-70-g09d2 From 4cb4f22b19237e63c460c53fbd1c417cdaf63014 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sat, 2 Feb 2008 14:29:25 +0800 Subject: [Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3858 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 16 +++++----------- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 +- 6 files changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a07df539e52..af866ab3f5a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -53,7 +53,6 @@ #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else -static void bfin_serial_do_work(struct work_struct *work); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); #endif @@ -372,8 +371,9 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) return IRQ_HANDLED; } +#endif - +#ifdef CONFIG_SERIAL_BFIN_CTSRTS static void bfin_serial_do_work(struct work_struct *work) { struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); @@ -607,22 +607,17 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_CTSRTS unsigned int status; -# ifdef CONFIG_SERIAL_BFIN_DMA struct uart_info *info = uart->port.info; struct tty_struct *tty = info->tty; status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; + schedule_work(&uart->cts_workqueue); } else { tty->hw_stopped = 0; } -# else - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); - if (!(status & TIOCM_CTS)) - schedule_work(&uart->cts_workqueue); -# endif #endif } @@ -939,10 +934,9 @@ static void __init bfin_serial_init_ports(void) bfin_serial_ports[i].rx_dma_channel = bfin_serial_resource[i].uart_rx_dma_channel; init_timer(&(bfin_serial_ports[i].rx_dma_timer)); -#else - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 233c585efc1..c0694ecd2ec 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -67,10 +67,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index a1b4f4eebd0..b6f513bee56 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -56,12 +56,12 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #else - struct work_struct cts_workqueue; # if ANOMALY_05000230 unsigned int anomaly_threshold; # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index f18c517cc93..8fc672d3105 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -67,10 +67,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 8733d47747e..c459c484646 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -69,10 +69,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index a1b4f4eebd0..b6f513bee56 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -56,12 +56,12 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #else - struct work_struct cts_workqueue; # if ANOMALY_05000230 unsigned int anomaly_threshold; # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif -- cgit v1.2.3-70-g09d2 From db288381e26e592b11572ce8199bedeadf0c0830 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sat, 2 Feb 2008 17:05:02 +0800 Subject: [Blackfin] serial driver: Add flow control support to bf54x Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/Kconfig | 4 ++-- drivers/serial/bfin_5xx.c | 12 ++++++++++++ include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 3 +++ 3 files changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 202fb5c99b8..cf627cd1b4c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -699,14 +699,14 @@ config BFIN_UART1_CTSRTS config UART1_CTS_PIN int "UART1 CTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. config UART1_RTS_PIN int "UART1 RTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index af866ab3f5a..69ac7007682 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -579,7 +579,11 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +# ifdef BF54x + if (UART_GET_MSR(uart) & CTS) +# else if (gpio_get_value(uart->cts_pin)) +# endif return TIOCM_DSR | TIOCM_CAR; else #endif @@ -594,9 +598,17 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); +# else gpio_set_value(uart->rts_pin, 0); +# endif else +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); +# else gpio_set_value(uart->rts_pin, 1); +# endif #endif } diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index c459c484646..7e6339f62a5 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -24,6 +24,8 @@ #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) #define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) +#define UART_GET_MSR(uart) bfin_read16(((uart)->port.membase + OFFSET_MSR)) +#define UART_GET_MCR(uart) bfin_read16(((uart)->port.membase + OFFSET_MCR)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) @@ -34,6 +36,7 @@ #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS -- cgit v1.2.3-70-g09d2 From 0711d857605ba598cd6d4254462d1419b233321b Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Feb 2008 15:16:50 +0800 Subject: Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 69ac7007682..2fb3081c502 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -64,15 +64,20 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct circ_buf *xmit = &uart->port.info->xmit; #if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) unsigned short ier; #endif while (!(UART_GET_LSR(uart) & TEMT)) - continue; + cpu_relax(); #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; #else #ifdef CONFIG_BF54x /* Clear TFI bit */ @@ -94,7 +99,8 @@ static void bfin_serial_start_tx(struct uart_port *port) struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA - bfin_serial_dma_tx_chars(uart); + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); #else #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); @@ -389,12 +395,10 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) unsigned short ier; int flags = 0; - if (!uart->tx_done) - return; uart->tx_done = 0; if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); + uart->tx_count = 0; uart->tx_done = 1; return; } @@ -428,9 +432,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); #else @@ -515,8 +516,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - clear_dma_irqstat(uart->tx_dma_channel); disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); #ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ETBEI); #else @@ -527,7 +528,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - uart->tx_done = 1; + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; bfin_serial_dma_tx_chars(uart); } @@ -542,12 +544,14 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) unsigned short irqstat; uart->rx_dma_nrows++; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) { + uart->rx_dma_buf.tail = DMA_RX_XCOUNT * uart->rx_dma_nrows; + bfin_serial_dma_rx_chars(uart); + if (uart->rx_dma_nrows >= DMA_RX_YCOUNT) { uart->rx_dma_nrows = 0; - uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0; + uart->rx_dma_buf.tail = 0; } + uart->rx_dma_buf.head = uart->rx_dma_buf.tail; + spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); -- cgit v1.2.3-70-g09d2 From 56f5de8fe7c127f6fb94b7a061d53090fd4a1c49 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Feb 2008 15:19:09 +0800 Subject: Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes. Also make rx dma buffer work as a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 51 +++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 22 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 2fb3081c502..2a411748579 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -415,7 +415,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) */ bfin_serial_mctrl_check(uart); - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -439,7 +438,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) ier |= ETBEI; UART_PUT_IER(uart, ier); #endif - spin_unlock_irqrestore(&uart->port.lock, flags); } static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) @@ -450,7 +448,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); - uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); if (status & BI) { uart->port.icount.brk++; @@ -476,10 +476,12 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) else flg = TTY_NORMAL; - for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { - if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - goto dma_ignore_char; - uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg); + for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); } dma_ignore_char: @@ -492,16 +494,20 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) int flags = 0; spin_lock_irqsave(&uart->port.lock, flags); - x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; if (x_pos == DMA_RX_XCOUNT) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - - if (pos>uart->rx_dma_buf.tail) { - uart->rx_dma_buf.tail = pos; + if (pos != uart->rx_dma_buf.tail) { + uart->rx_dma_buf.head = pos; bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail; + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } spin_unlock_irqrestore(&uart->port.lock, flags); uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; @@ -525,12 +531,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + bfin_serial_dma_tx_chars(uart); } @@ -542,15 +548,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; + int pos; - uart->rx_dma_nrows++; - uart->rx_dma_buf.tail = DMA_RX_XCOUNT * uart->rx_dma_nrows; - bfin_serial_dma_rx_chars(uart); - if (uart->rx_dma_nrows >= DMA_RX_YCOUNT) { - uart->rx_dma_nrows = 0; - uart->rx_dma_buf.tail = 0; + uart->rx_dma_nrows = DMA_RX_YCOUNT - + get_dma_curr_ycount(uart->rx_dma_channel); + pos = DMA_RX_XCOUNT * uart->rx_dma_nrows; + if (pos != uart->rx_dma_buf.tail) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - uart->rx_dma_buf.head = uart->rx_dma_buf.tail; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); -- cgit v1.2.3-70-g09d2 From 96de1a8f0275bd67f243833e7088baced518f873 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 26 Feb 2008 14:52:45 +0900 Subject: serial: Move asm-sh/sci.h to linux/serial_sci.h. This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-shx3.c | 2 +- drivers/serial/sh-sci.c | 2 +- include/asm-sh/sci.h | 34 ---------------------------------- include/linux/serial_sci.h | 32 ++++++++++++++++++++++++++++++++ 21 files changed, 51 insertions(+), 53 deletions(-) delete mode 100644 include/asm-sh/sci.h create mode 100644 include/linux/serial_sci.h (limited to 'drivers/serial') diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index b230eb278ce..cc530f4d84d 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index db6ef5cecde..e98dc445035 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index a564425b905..e6d4ec445dd 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index dd0a20a685f..f581534cb73 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 9066ed78e28..d3733b13ea5 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 0cc0e2bf135..7406c9ad925 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 3855ea4c21c..8028082527c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #define INTC_ICR1 0xA4140010UL diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index dab193293f2..7371abf64f8 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index ae3603aca61..ec884039b91 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 85f81579b97..254c5c55ab9 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index c0a3f079dfd..6d4f50cd4aa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 967e8b69a2f..f26b5cdad0d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 73c778d40d1..b98b4bc93ec 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -10,9 +10,9 @@ #include #include #include +#include #include #include -#include static struct resource usbf_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index eabd5386812..07c988dc9de 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 32f4f59a837..b9cec48b180 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 293004b526f..18dbbe23fea 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 74b60e96cdf..621e7329ec6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -10,10 +10,10 @@ #include #include #include +#include #include #include #include -#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 4dc958b6b31..bd35f32534b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -10,9 +10,9 @@ #include #include #include +#include #include #include -#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 9ce12cb2ceb..a8c116b80bf 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -41,6 +41,7 @@ #include #include #include +#include #ifdef CONFIG_CPU_FREQ #include @@ -54,7 +55,6 @@ #include #endif -#include #include "sh-sci.h" struct sci_port { diff --git a/include/asm-sh/sci.h b/include/asm-sh/sci.h deleted file mode 100644 index 52e73660c12..00000000000 --- a/include/asm-sh/sci.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_SCI_H -#define __ASM_SH_SCI_H - -#include - -/* - * Generic header for SuperH SCI(F) - * - * Do not place SH-specific parts in here, sh64 and h8300 depend on this too. - */ - -/* Offsets into the sci_port->irqs array */ -enum { - SCIx_ERI_IRQ, - SCIx_RXI_IRQ, - SCIx_TXI_IRQ, - SCIx_BRI_IRQ, - SCIx_NR_IRQS, -}; - -/* - * Platform device specific platform_data struct - */ -struct plat_sci_port { - void __iomem *membase; /* io cookie */ - unsigned long mapbase; /* resource base */ - unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ - unsigned int type; /* SCI / SCIF / IRDA */ - upf_t flags; /* UPF_* flags */ -}; - -int early_sci_setup(struct uart_port *port); - -#endif /* __ASM_SH_SCI_H */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h new file mode 100644 index 00000000000..893cc53486b --- /dev/null +++ b/include/linux/serial_sci.h @@ -0,0 +1,32 @@ +#ifndef __LINUX_SERIAL_SCI_H +#define __LINUX_SERIAL_SCI_H + +#include + +/* + * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) + */ + +/* Offsets into the sci_port->irqs array */ +enum { + SCIx_ERI_IRQ, + SCIx_RXI_IRQ, + SCIx_TXI_IRQ, + SCIx_BRI_IRQ, + SCIx_NR_IRQS, +}; + +/* + * Platform device specific platform_data struct + */ +struct plat_sci_port { + void __iomem *membase; /* io cookie */ + unsigned long mapbase; /* resource base */ + unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ + unsigned int type; /* SCI / SCIF / IRDA */ + upf_t flags; /* UPF_* flags */ +}; + +int early_sci_setup(struct uart_port *port); + +#endif /* __LINUX_SERIAL_SCI_H */ -- cgit v1.2.3-70-g09d2 From 0aef45645174525ee6aa7baed247a130e052740d Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 29 Feb 2008 12:08:42 +0800 Subject: Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3910 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 2a411748579..0aa345b9a38 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -48,7 +48,7 @@ #define DMA_RX_XCOUNT 512 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) -#define DMA_RX_FLUSH_JIFFIES 5 +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -393,7 +393,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; unsigned short ier; - int flags = 0; uart->tx_done = 0; @@ -491,9 +490,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - int flags = 0; - spin_lock_irqsave(&uart->port.lock, flags); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; @@ -509,7 +506,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_irqrestore(&uart->port.lock, flags); + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); } @@ -548,22 +545,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; - int pos; - - uart->rx_dma_nrows = DMA_RX_YCOUNT - - get_dma_curr_ycount(uart->rx_dma_channel); - pos = DMA_RX_XCOUNT * uart->rx_dma_nrows; - if (pos != uart->rx_dma_buf.tail) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); - spin_unlock(&uart->port.lock); + + del_timer(&(uart->rx_dma_timer)); + uart->rx_dma_timer.expires = jiffies; + add_timer(&(uart->rx_dma_timer)); + return IRQ_HANDLED; } #endif -- cgit v1.2.3-70-g09d2 From 51587cb54fb2b27c5e0db9078a61261c9359142a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 4 Mar 2008 14:28:21 -0800 Subject: serial: add PNP ID GVC0303 for Archtek 3334BRV ISA modem Thomas Lehmann verified that this entry works. Signed-off-by: Bjorn Helgaas Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pnp.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 6f09cbd7fc4..97c68d021d2 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -91,6 +91,8 @@ static const struct pnp_device_id pnp_dev_table[] = { /* Archtek America Corp. */ /* Archtek SmartLink Modem 3334BT Plug & Play */ { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, /* Hayes */ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ { "HAY0001", 0 }, -- cgit v1.2.3-70-g09d2 From 022d917d9621ee79e6f6782fbddd582b8f941024 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 4 Mar 2008 14:29:19 -0800 Subject: drivers/serial/m32r_sio.c: correct use of ! and & In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // Signed-off-by: Julia Lawall Cc: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/m32r_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c index 348ee2c19b5..c2bb11c02bd 100644 --- a/drivers/serial/m32r_sio.c +++ b/drivers/serial/m32r_sio.c @@ -421,7 +421,7 @@ static void transmit_chars(struct uart_sio_port *up) up->port.icount.tx++; if (uart_circ_empty(xmit)) break; - while (!serial_in(up, UART_LSR) & UART_LSR_THRE); + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); } while (--count > 0); -- cgit v1.2.3-70-g09d2 From e84290dc79d30af3e95b38e670f80c0b5046bbf2 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 10 Mar 2008 11:43:35 -0700 Subject: of_serial: fix section mismatch warnings Fix the following section mismatches: WARNING: drivers/built-in.o(.exit.text+0x5a): Section mismatch in reference from the function of_platform_serial_exit() to the variable .devinit.data:of_platform_serial_driver The function __exit of_platform_serial_exit() references a variable __devinitdata of_platform_serial_driver. Signed-off-by: Josh Boyer Signed-off-by: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/of_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index a64d8582199..c0e50a46105 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -138,7 +138,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = { { /* end of list */ }, }; -static struct of_platform_driver __devinitdata of_platform_serial_driver = { +static struct of_platform_driver of_platform_serial_driver = { .owner = THIS_MODULE, .name = "of_serial", .probe = of_platform_serial_probe, -- cgit v1.2.3-70-g09d2