From 8c328a262f513c042f97fcd2f2797a6d69fc0773 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 15 Jan 2014 17:07:43 +0800 Subject: spi: sirf: Avoid duplicate code in various bits_per_word cases Trivial cleanup to avoid duplicate code in various bits_per_word cases. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index e430689c383..632d2b5b821 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -459,11 +459,6 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_8; sspi->rx_word = spi_sirfsoc_rx_word_u8; sspi->tx_word = spi_sirfsoc_tx_word_u8; - txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_BYTE; - rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_BYTE; - sspi->word_width = 1; break; case 12: case 16: @@ -471,26 +466,22 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) SIRFSOC_SPI_TRAN_DAT_FORMAT_16; sspi->rx_word = spi_sirfsoc_rx_word_u16; sspi->tx_word = spi_sirfsoc_tx_word_u16; - txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_WORD; - rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_WORD; - sspi->word_width = 2; break; case 32: regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_32; sspi->rx_word = spi_sirfsoc_rx_word_u32; sspi->tx_word = spi_sirfsoc_tx_word_u32; - txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_DWORD; - rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | - SIRFSOC_SPI_FIFO_WIDTH_DWORD; - sspi->word_width = 4; break; default: BUG(); } + sspi->word_width = DIV_ROUND_UP(bits_per_word, 8); + txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + sspi->word_width; + rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + sspi->word_width; + if (!(spi->mode & SPI_CS_HIGH)) regval |= SIRFSOC_SPI_CS_IDLE_STAT; if (!(spi->mode & SPI_LSB_FIRST)) -- cgit v1.2.3-70-g09d2 From dd7243d6a5de6faaef30cebc554ce8b39d5a3de5 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 13 Feb 2014 00:30:19 +0800 Subject: spi: sirf: move to use generic dma dt-binding sirf-dma driver enabled generic dt binding for dma channels. see here we remove self-defined dma channel prop and move to use generic dma_request_slave_channel. related changes in dts is something like: dmas = <&dmac1 9>, <&dmac1 4>; dma-names = "rx", "tx"; Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 632d2b5b821..61e5eafac92 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -22,7 +22,6 @@ #include #include #include -#include #define DRIVER_NAME "sirfsoc_spi" @@ -539,8 +538,6 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) struct spi_master *master; struct resource *mem_res; int num_cs, cs_gpio, irq; - u32 rx_dma_ch, tx_dma_ch; - dma_cap_mask_t dma_cap_mask; int i; int ret; @@ -551,20 +548,6 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) goto err_cs; } - ret = of_property_read_u32(pdev->dev.of_node, - "sirf,spi-dma-rx-channel", &rx_dma_ch); - if (ret < 0) { - dev_err(&pdev->dev, "Unable to get rx dma channel\n"); - goto err_cs; - } - - ret = of_property_read_u32(pdev->dev.of_node, - "sirf,spi-dma-tx-channel", &tx_dma_ch); - if (ret < 0) { - dev_err(&pdev->dev, "Unable to get tx dma channel\n"); - goto err_cs; - } - master = spi_alloc_master(&pdev->dev, sizeof(*sspi) + sizeof(int) * num_cs); if (!master) { dev_err(&pdev->dev, "Unable to allocate SPI master\n"); @@ -628,18 +611,13 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) sspi->bitbang.master->dev.of_node = pdev->dev.of_node; /* request DMA channels */ - dma_cap_zero(dma_cap_mask); - dma_cap_set(DMA_INTERLEAVE, dma_cap_mask); - - sspi->rx_chan = dma_request_channel(dma_cap_mask, (dma_filter_fn)sirfsoc_dma_filter_id, - (void *)rx_dma_ch); + sspi->rx_chan = dma_request_slave_channel(&pdev->dev, "rx"); if (!sspi->rx_chan) { dev_err(&pdev->dev, "can not allocate rx dma channel\n"); ret = -ENODEV; goto free_master; } - sspi->tx_chan = dma_request_channel(dma_cap_mask, (dma_filter_fn)sirfsoc_dma_filter_id, - (void *)tx_dma_ch); + sspi->tx_chan = dma_request_slave_channel(&pdev->dev, "tx"); if (!sspi->tx_chan) { dev_err(&pdev->dev, "can not allocate tx dma channel\n"); ret = -ENODEV; -- cgit v1.2.3-70-g09d2 From facffed29709313593e6feab3a08d9664874e977 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Thu, 13 Feb 2014 00:30:20 +0800 Subject: spi: sirf: use SET_SYSTEM_SLEEP_PM_OPS to initialize PM entries use SET_SYSTEM_SLEEP_PM_OPS to initialize PM entries, this makes the codes clean and also enable the ability of hibernation support for sirf SPI. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 61e5eafac92..5210b94729a 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -693,7 +693,7 @@ static int spi_sirfsoc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int spi_sirfsoc_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -716,12 +716,11 @@ static int spi_sirfsoc_resume(struct device *dev) return 0; } +#endif static const struct dev_pm_ops spi_sirfsoc_pm_ops = { - .suspend = spi_sirfsoc_suspend, - .resume = spi_sirfsoc_resume, + SET_SYSTEM_SLEEP_PM_OPS(spi_sirfsoc_suspend, spi_sirfsoc_resume) }; -#endif static const struct of_device_id spi_sirfsoc_of_match[] = { { .compatible = "sirf,prima2-spi", }, @@ -734,9 +733,7 @@ static struct platform_driver spi_sirfsoc_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &spi_sirfsoc_pm_ops, -#endif .of_match_table = spi_sirfsoc_of_match, }, .probe = spi_sirfsoc_probe, -- cgit v1.2.3-70-g09d2 From 71aa2e3207ad3249b4a7ceff7ca775a08341fdcb Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 26 Feb 2014 10:32:48 +0900 Subject: spi: sirf: Use SIMPLE_DEV_PM_OPS macro Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler. Signed-off-by: Jingoo Han Acked-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 5210b94729a..dc962a17f37 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -718,9 +718,8 @@ static int spi_sirfsoc_resume(struct device *dev) } #endif -static const struct dev_pm_ops spi_sirfsoc_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(spi_sirfsoc_suspend, spi_sirfsoc_resume) -}; +static SIMPLE_DEV_PM_OPS(spi_sirfsoc_pm_ops, spi_sirfsoc_suspend, + spi_sirfsoc_resume); static const struct of_device_id spi_sirfsoc_of_match[] = { { .compatible = "sirf,prima2-spi", }, -- cgit v1.2.3-70-g09d2 From eeb7139524d1851c29b5c02b3dcd6679299a104e Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Sat, 1 Mar 2014 12:38:17 +0800 Subject: spi: sirf: provide a shortcut for spi command-data mode there are many SPI clients which use the following protocal: step 1: send command bytes to clients(rx buffer is empty) step 2: send data bytes to clients or receive data bytes from clients. SiRFprimaII provides a shortcut for this kind of SPI transfer. when tx buf is less or equal than 4 bytes and rx buf is null in a transfer, we think it as 'command' data and use hardware command register for the transfer. here we can save some CPU loading than doing both tx and rx for a normal transfer. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index dc962a17f37..a72b8f87a15 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -131,6 +131,8 @@ #define IS_DMA_VALID(x) (x && ALIGNED(x->tx_buf) && ALIGNED(x->rx_buf) && \ ALIGNED(x->len) && (x->len < 2 * PAGE_SIZE)) +#define SIRFSOC_MAX_CMD_BYTES 4 + struct sirfsoc_spi { struct spi_bitbang bitbang; struct completion rx_done; @@ -161,6 +163,12 @@ struct sirfsoc_spi { void *dummypage; int word_width; /* in bytes */ + /* + * if tx size is not more than 4 and rx size is NULL, use + * command model + */ + bool tx_by_cmd; + int chipselect[0]; }; @@ -259,6 +267,12 @@ static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id) writel(spi_stat, sspi->base + SIRFSOC_SPI_INT_STATUS); + if (sspi->tx_by_cmd && (spi_stat & SIRFSOC_SPI_FRM_END)) { + complete(&sspi->tx_done); + writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + return IRQ_HANDLED; + } + /* Error Conditions */ if (spi_stat & SIRFSOC_SPI_RX_OFLOW || spi_stat & SIRFSOC_SPI_TX_UFLOW) { @@ -309,6 +323,34 @@ static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t) writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS); + /* + * fill tx_buf into command register and wait for its completion + */ + if (sspi->tx_by_cmd) { + u32 cmd; + memcpy(&cmd, sspi->tx, t->len); + + if (sspi->word_width == 1 && !(spi->mode & SPI_LSB_FIRST)) + cmd = cpu_to_be32(cmd) >> + ((SIRFSOC_MAX_CMD_BYTES - t->len) * 8); + if (sspi->word_width == 2 && t->len == 4 && + (!(spi->mode & SPI_LSB_FIRST))) + cmd = ((cmd & 0xffff) << 16) | (cmd >> 16); + + writel(cmd, sspi->base + SIRFSOC_SPI_CMD); + writel(SIRFSOC_SPI_FRM_END_INT_EN, + sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_CMD_TX_EN, + sspi->base + SIRFSOC_SPI_TX_RX_EN); + + if (wait_for_completion_timeout(&sspi->tx_done, timeout) == 0) { + dev_err(&spi->dev, "transfer timeout\n"); + return 0; + } + + return t->len; + } + if (sspi->left_tx_word == 1) { writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | SIRFSOC_SPI_ENA_AUTO_CLR, @@ -509,6 +551,14 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) writel(txfifo_ctrl, sspi->base + SIRFSOC_SPI_TXFIFO_CTRL); writel(rxfifo_ctrl, sspi->base + SIRFSOC_SPI_RXFIFO_CTRL); + if (t && t->tx_buf && !t->rx_buf && (t->len <= SIRFSOC_MAX_CMD_BYTES)) { + regval |= (SIRFSOC_SPI_CMD_BYTE_NUM((t->len - 1)) | + SIRFSOC_SPI_CMD_MODE); + sspi->tx_by_cmd = true; + } else { + regval &= ~SIRFSOC_SPI_CMD_MODE; + sspi->tx_by_cmd = false; + } writel(regval, sspi->base + SIRFSOC_SPI_CTRL); if (IS_DMA_VALID(t)) { -- cgit v1.2.3-70-g09d2 From a82ba3a318dd5eaf1f3dcbc335f81770d557a4fc Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 5 Mar 2014 15:19:09 +0800 Subject: spi: sirf: Add missing spi_master_{resume,suspend} calls to PM callbacks This is required since commit 2025172e3280 "spi/bitbang: Use core message pump". spi-bitbang now uses core message pump, so it needs to call spi_master_suspend/ spi_master_resume to stop/start the queue while suspend/resume. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index a72b8f87a15..1a77ad52812 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -748,6 +748,11 @@ static int spi_sirfsoc_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct sirfsoc_spi *sspi = spi_master_get_devdata(master); + int ret; + + ret = spi_master_suspend(master); + if (ret) + return ret; clk_disable(sspi->clk); return 0; @@ -764,7 +769,7 @@ static int spi_sirfsoc_resume(struct device *dev) writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); - return 0; + return spi_master_resume(master); } #endif -- cgit v1.2.3-70-g09d2 From 818e91625aa17161cd6b39a4d08b77c984f0f485 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:57 +0800 Subject: spi: sirf: correct TXFIFO empty interrupt status bit the old code uses wrong marco - SIRFSOC_SPI_FIFO_FULL is not for FIFO interrupt status, it is for FIFO status. here in the ISR, SIRFSOC_SPI_TXFIFO_EMPTY is the right bit for SPI TXFIFO interrupt status. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 1a77ad52812..51d7c988d3a 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -287,8 +287,8 @@ static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id) sspi->left_rx_word) sspi->rx_word(sspi); - if (spi_stat & (SIRFSOC_SPI_FIFO_EMPTY - | SIRFSOC_SPI_TXFIFO_THD_REACH)) + if (spi_stat & (SIRFSOC_SPI_TXFIFO_EMPTY | + SIRFSOC_SPI_TXFIFO_THD_REACH)) while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS) & SIRFSOC_SPI_FIFO_FULL)) && sspi->left_tx_word) -- cgit v1.2.3-70-g09d2 From 625227a4e916fa87f1dd84bde518ef403c3f708a Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:58 +0800 Subject: spi: sirf: set SPI controller in RISC IO chipselect mode SPI bitbang supply "chipselect" interface for change chip-select line , in the SiRFSoC SPI controller, we need to enable "SPI_CS_IO_MODE", otherwise, spi_sirfsoc_chipselect() has no effect. now the driver is working is because SPI controller will control CS automatically without SPI_CS_IO_MODE. this patch makes the CS controller really controlled by software. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 51d7c988d3a..9b30743d816 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -559,6 +559,11 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) regval &= ~SIRFSOC_SPI_CMD_MODE; sspi->tx_by_cmd = false; } + /* + * set spi controller in RISC chipselect mode, we are controlling CS by + * software BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. + */ + regval |= SIRFSOC_SPI_CS_IO_MODE; writel(regval, sspi->base + SIRFSOC_SPI_CTRL); if (IS_DMA_VALID(t)) { -- cgit v1.2.3-70-g09d2 From 6ee8a2f7d5e78700b6e64799b5e9976b21cfad79 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 14 Apr 2014 14:29:59 +0800 Subject: spi: sirf: make GPIO chipselect function work well orignal GPIO chipslect is not standard because it don't take care to the chipselect signal: BITBANG_CS_ACTIVE and BITBANG_CS_INACTIVE. Signed-off-by: Qipan Li Signed-off-by: Barry Song Signed-off-by: Mark Brown --- drivers/spi/spi-sirf.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/spi/spi-sirf.c') diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index 9b30743d816..67d8909dcf3 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -470,7 +470,16 @@ static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) writel(regval, sspi->base + SIRFSOC_SPI_CTRL); } else { int gpio = sspi->chipselect[spi->chip_select]; - gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); + switch (value) { + case BITBANG_CS_ACTIVE: + gpio_direction_output(gpio, + spi->mode & SPI_CS_HIGH ? 1 : 0); + break; + case BITBANG_CS_INACTIVE: + gpio_direction_output(gpio, + spi->mode & SPI_CS_HIGH ? 0 : 1); + break; + } } } -- cgit v1.2.3-70-g09d2