From 9e04b3336a90efef6a912501155f9880abf7b3c2 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 18 Jun 2009 16:48:59 -0700 Subject: spi_mpc83xx: handle other Freescale processors With this patch we'll able to select spi_mpc83xx driver on the MPC86xx platforms. Let the driver depend on FSL_SOC, so we don't have to worry about Kconfig anymore. Also remove the "experimental" dependency, the driver has been tested to work on a various hardware, and surely not experimental anymore. Signed-off-by: Anton Vorontsov Cc: Kumar Gala Cc: David Brownell Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/Kconfig | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e8aae227b5e..3fade3c5cd7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -140,16 +140,14 @@ config SPI_MPC52xx_PSC Controller in master SPI mode. config SPI_MPC83xx - tristate "Freescale MPC83xx/QUICC Engine SPI controller" - depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL + tristate "Freescale MPC8xxx SPI controller" + depends on FSL_SOC help - This enables using the Freescale MPC83xx and QUICC Engine SPI - controllers in master mode. + This enables using the Freescale MPC8xxx SPI controllers in master + mode. - Note, this driver uniquely supports the SPI controller on the MPC83xx - family of PowerPC processors, plus processors with QUICC Engine - technology. This driver uses a simple set of shift registers for data - (opposed to the CPM based descriptor model). + This driver uses a simple set of shift registers for data (opposed + to the CPM based descriptor model). config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" -- cgit v1.2.3-70-g09d2