From c420811f117a59a4a7d4e34b362437b91c7fafa1 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 25 Jan 2013 19:39:51 +0100 Subject: serial: ralink: adds support for the serial core found on ralink wisoc The MIPS based Ralink WiSoC platform has 1 or more 8250 compatible serial cores. To make them work we require the same quirks that are used by AU1x00. Signed-off-by: John Crispin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 6 +++--- drivers/tty/serial/8250/Kconfig | 8 ++++++++ 2 files changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers/tty/serial/8250') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 24939ca3eed..0efc815a496 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -317,9 +317,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value) serial_out(up, UART_DLM, value >> 8 & 0xff); } -#ifdef CONFIG_MIPS_ALCHEMY +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) -/* Au1x00 UART hardware has a weird register layout */ +/* Au1x00/RT288x UART hardware has a weird register layout */ static const u8 au_io_in_map[] = { [UART_RX] = 0, [UART_IER] = 2, @@ -440,7 +440,7 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32_serial_out; break; -#ifdef CONFIG_MIPS_ALCHEMY +#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index d31f4c63d4b..2ef9537bcb2 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -276,3 +276,11 @@ config SERIAL_8250_EM Selecting this option will add support for the integrated serial port hardware found on the Emma Mobile line of processors. If unsure, say N. + +config SERIAL_8250_RT288X + bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" + depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883) + help + If you have a Ralink RT288x/RT305x SoC based board and want to use the + serial port, say Y to this option. The driver can handle up to 2 serial + ports. If unsure, say N. -- cgit v1.2.3-70-g09d2