From bcb9973a6097652a12660958449301aada41de9c Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 14 Jul 2014 16:09:59 +0900 Subject: serial: sh-sci: Fix range check of bit-rate for HSCIF If bit-rate calculation result of HSCIF is expect 255 from 0, driver does not calculate error bit. However, we need to round the value to calculate error bit in the case of negative value. This rounds the value of bit-rate using clamp(), and bit-rate is the case of negative value, it enables the calculation of the error bit. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/tty/serial/sh-sci.c') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 2ba42069922..091b65587c7 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1791,8 +1791,7 @@ static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq, /* integerized formulas from HSCIF documentation */ br = DIV_ROUND_CLOSEST(freq, (sr * (1 << (2 * c + 1)) * bps)) - 1; - if (br < 0 || br > 255) - continue; + br = clamp(br, 0, 255); err = DIV_ROUND_CLOSEST(freq, ((br + 1) * bps * sr * (1 << (2 * c + 1)) / 1000)) - 1000; -- cgit v1.2.3-70-g09d2