From 4fedd0bf479558e50924c6d88f9197336742d20f Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 15 Jan 2014 16:35:43 -0500 Subject: drivers/tty/hvc: don't use module_init in non-modular hyp. console code The HVC_OPAL/RTAS/UDBG/XEN options are all bool, and hence their support is either present or absent. It will never be modular, so using module_init as an alias for __initcall is rather misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of device_initcall directly in this change means that the runtime impact is zero -- it will remain at level 6 in initcall ordering. Also the __exitcall functions have been outright deleted since they are only ever of interest to UML, and UML will never be using any of this code. Cc: Richard Weinberger Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Signed-off-by: Paul Gortmaker Acked-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- drivers/tty/hvc/hvc_opal.c | 8 +------- drivers/tty/hvc/hvc_rtas.c | 12 +----------- drivers/tty/hvc/hvc_udbg.c | 9 +-------- drivers/tty/hvc/hvc_xen.c | 17 +---------------- 4 files changed, 4 insertions(+), 42 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index 6496872e2e4..b01659bd4f7 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -255,13 +255,7 @@ static int __init hvc_opal_init(void) /* Register as a vio device to receive callbacks */ return platform_driver_register(&hvc_opal_driver); } -module_init(hvc_opal_init); - -static void __exit hvc_opal_exit(void) -{ - platform_driver_unregister(&hvc_opal_driver); -} -module_exit(hvc_opal_exit); +device_initcall(hvc_opal_init); static void udbg_opal_putc(char c) { diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c index 0069bb86ba4..08c87920b74 100644 --- a/drivers/tty/hvc/hvc_rtas.c +++ b/drivers/tty/hvc/hvc_rtas.c @@ -102,17 +102,7 @@ static int __init hvc_rtas_init(void) return 0; } -module_init(hvc_rtas_init); - -/* This will tear down the tty portion of the driver */ -static void __exit hvc_rtas_exit(void) -{ - /* Really the fun isn't over until the worker thread breaks down and - * the tty cleans up */ - if (hvc_rtas_dev) - hvc_remove(hvc_rtas_dev); -} -module_exit(hvc_rtas_exit); +device_initcall(hvc_rtas_init); /* This will happen prior to module init. There is no tty at this time? */ static int __init hvc_rtas_console_init(void) diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c index 72228276fe3..9cf573d06a2 100644 --- a/drivers/tty/hvc/hvc_udbg.c +++ b/drivers/tty/hvc/hvc_udbg.c @@ -80,14 +80,7 @@ static int __init hvc_udbg_init(void) return 0; } -module_init(hvc_udbg_init); - -static void __exit hvc_udbg_exit(void) -{ - if (hvc_udbg_dev) - hvc_remove(hvc_udbg_dev); -} -module_exit(hvc_udbg_exit); +device_initcall(hvc_udbg_init); static int __init hvc_udbg_console_init(void) { diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 636c9baad7a..2dc2831840c 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -561,18 +561,7 @@ static int __init xen_hvc_init(void) #endif return r; } - -static void __exit xen_hvc_fini(void) -{ - struct xencons_info *entry, *next; - - if (list_empty(&xenconsoles)) - return; - - list_for_each_entry_safe(entry, next, &xenconsoles, list) { - xen_console_remove(entry); - } -} +device_initcall(xen_hvc_init); static int xen_cons_init(void) { @@ -598,10 +587,6 @@ static int xen_cons_init(void) hvc_instantiate(HVC_COOKIE, 0, ops); return 0; } - - -module_init(xen_hvc_init); -module_exit(xen_hvc_fini); console_initcall(xen_cons_init); #ifdef CONFIG_EARLY_PRINTK -- cgit v1.2.3-70-g09d2 From 3ac06b905655b3ef2fd2196bab36e4587e1e4e4f Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Tue, 7 Jan 2014 13:34:37 +0100 Subject: tty: n_gsm: Fix for modems with brk in modem status control 3GPP TS 07.10 states in section 5.4.6.3.7: "The length byte contains the value 2 or 3 ... depending on the break signal." The break byte is optional and if it is sent, the length is 3. In fact the driver was not able to work with modems that send this break byte in their modem status control message. If the modem just sends the break byte if it is really set, then weird things might happen. The code for deconding the modem status to the internal linux presentation in gsm_process_modem has already a big comment about this 2 or 3 byte length thing and it is already able to decode the brk, but the code calling the gsm_process_modem function in gsm_control_modem does not encode it and hand it over the right way. This patch fixes this. Without this fix if the modem sends the brk byte in it's modem status control message the driver will hang when opening a muxed channel. Signed-off-by: Lars Poeschel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_gsm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index f34461c5f14..2ebe47b78a3 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1090,6 +1090,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) { unsigned int addr = 0; unsigned int modem = 0; + unsigned int brk = 0; struct gsm_dlci *dlci; int len = clen; u8 *dp = data; @@ -1116,6 +1117,16 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) if (len == 0) return; } + len--; + if (len > 0) { + while (gsm_read_ea(&brk, *dp++) == 0) { + len--; + if (len == 0) + return; + } + modem <<= 7; + modem |= (brk & 0x7f); + } tty = tty_port_tty_get(&dlci->port); gsm_process_modem(tty, dlci, modem, clen); if (tty) { -- cgit v1.2.3-70-g09d2 From d8a5dc3033af2fd6d16030d2ee4fbd073460fe54 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Fri, 7 Feb 2014 11:38:30 +0100 Subject: tty: Set correct tty name in 'active' sysfs attribute The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. This resolves an issue on s390 platforms in determining the correct console device to use. Cc: Lennart Poettering Cc: Kay Sievers Cc: Jiri Slaby Cc: David Herrmann Signed-off-by: Werner Fink Signed-off-by: Hannes Reinecke Cc: stable Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-tty | 3 ++- drivers/tty/tty_io.c | 25 ++++++++++++++++++------- 2 files changed, 20 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index ad22fb0ee76..a2ccec35ffc 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -3,7 +3,8 @@ Date: Nov 2010 Contact: Kay Sievers Description: Shows the list of currently configured - console devices, like 'tty1 ttyS0'. + tty devices used for the console, + like 'tty1 ttyS0'. The last entry in the file is the active device connected to /dev/console. The file supports poll() to detect virtual diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index c74a00ad7ad..bd2715a9d8e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1267,16 +1267,17 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p) * @p: output buffer of at least 7 bytes * * Generate a name from a driver reference and write it to the output - * buffer. + * buffer. Return the number of bytes written. * * Locking: None */ -static void tty_line_name(struct tty_driver *driver, int index, char *p) +static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) { if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE) - strcpy(p, driver->name); + return sprintf(p, "%s", driver->name); else - sprintf(p, "%s%d", driver->name, index + driver->name_base); + return sprintf(p, "%s%d", driver->name, + index + driver->name_base); } /** @@ -3545,9 +3546,19 @@ static ssize_t show_cons_active(struct device *dev, if (i >= ARRAY_SIZE(cs)) break; } - while (i--) - count += sprintf(buf + count, "%s%d%c", - cs[i]->name, cs[i]->index, i ? ' ':'\n'); + while (i--) { + struct tty_driver *driver; + const char *name = cs[i]->name; + int index = cs[i]->index; + + driver = cs[i]->device(cs[i], &index); + if (driver) { + count += tty_line_name(driver, index, buf + count); + count += sprintf(buf + count, "%c", i ? ' ':'\n'); + } else + count += sprintf(buf + count, "%s%d%c", + name, index, i ? ' ':'\n'); + } console_unlock(); return count; -- cgit v1.2.3-70-g09d2 From ce6acca65ee42c06ac54ec9ba918865d06cee29d Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 24 Jan 2014 18:09:41 +0100 Subject: serial: omap-serial: Move info message to probe function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This can cause lots of extra messages at boot time, slowing things down. It is caused by commit 2a0b965cfb6e (serial: omap: Add support for optional wake-up) which was applied for v3.13-rc1. This patch moves the infomessage to the probe function to display it only once. Reported-by: Uwe Kleine-König Acked-by: Tony Lindgren Signed-off-by: Markus Pargmann Acked-by: Uwe Kleine-König Cc: stable # 3.13 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index fa511ebab67..20515817309 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -738,9 +738,6 @@ static int serial_omap_startup(struct uart_port *port) return retval; } disable_irq(up->wakeirq); - } else { - dev_info(up->port.dev, "no wakeirq for uart%d\n", - up->port.line); } dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); @@ -1687,6 +1684,9 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.iotype = UPIO_MEM; up->port.irq = uartirq; up->wakeirq = wakeirq; + if (!up->wakeirq) + dev_info(up->port.dev, "no wakeirq for uart%d\n", + up->port.line); up->port.regshift = 2; up->port.fifosize = 64; -- cgit v1.2.3-70-g09d2 From 13b949f03e642c5df36ebf5b4770d75f8c4a6b09 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Thu, 16 Jan 2014 14:55:57 +0200 Subject: serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes following compilation warnings: drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function] drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function] Fix this by using CONFIG_PM_SLEEP instead. Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index faa64e64610..ed311357674 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -391,7 +391,7 @@ static int dw8250_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int dw8250_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); @@ -409,7 +409,7 @@ static int dw8250_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ #ifdef CONFIG_PM_RUNTIME static int dw8250_runtime_suspend(struct device *dev) -- cgit v1.2.3-70-g09d2 From a64c1a1c755674399da3689499b3f64c2a538120 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 13 Feb 2014 10:52:03 +0100 Subject: serial: omap: fix rs485 probe on defered pinctrl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the gpio is not yet available we better also defer the probing in the rs485 case. Signed-off-by: Michael Grzeschik Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 20515817309..77f035158d6 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1601,8 +1601,11 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, flags & SER_RS485_RTS_AFTER_SEND); if (ret < 0) return ret; - } else + } else if (up->rts_gpio == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else { up->rts_gpio = -EINVAL; + } if (of_property_read_u32_array(np, "rs485-rts-delay", rs485_delay, 2) == 0) { -- cgit v1.2.3-70-g09d2 From a5934804a834f525c9e6289935ceef65b952b101 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 11 Feb 2014 11:49:58 -0500 Subject: n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0 Commit eafbe67f84761d787802e5113d895a316b6292fe, n_tty: Refactor input_available_p() by call site broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0. When TIME_CHAR and MIN_CHAR are both 0, input is available if the read_cnt is 1 (not 0). Reported-by: Eric Dumazet Tested-by: Eric Dumazet Reported-by: Stephane Eranian Tested-by: David Ahern Tested-by: Arnaldo Carvalho de Melo Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index cb8017aa443..2747a3b20a5 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1896,7 +1896,7 @@ err: static inline int input_available_p(struct tty_struct *tty, int poll) { struct n_tty_data *ldata = tty->disc_data; - int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1; + int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1; if (ldata->icanon && !L_EXTPROC(tty)) { if (ldata->canon_head != ldata->read_tail) -- cgit v1.2.3-70-g09d2 From 333c085e4b0cd9df04b087d29f87969a4e26dfa9 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Tue, 11 Feb 2014 14:18:13 +0400 Subject: serial: 8250_pci: unbreak last serial ports on NetMos 9865 cards Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 50228eed3b6..0ff3e3624d4 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -783,7 +783,8 @@ static int pci_netmos_9900_setup(struct serial_private *priv, { unsigned int bar; - if ((priv->dev->subsystem_device & 0xff00) == 0x3000) { + if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) && + (priv->dev->subsystem_device & 0xff00) == 0x3000) { /* netmos apparently orders BARs by datasheet layout, so serial * ports get BARs 0 and 3 (or 1 and 4 for memmapped) */ -- cgit v1.2.3-70-g09d2 From fb78b811422cd2d8c8605949cc4cc13618347ad5 Mon Sep 17 00:00:00 2001 From: Qipan Li Date: Mon, 27 Jan 2014 14:23:39 +0800 Subject: serial: sirf: fix kernel panic caused by unpaired spinlock commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [] (unwind_backtrace+0x0/0xe0) from [] (show_stack+0x10/0x14) [ 5.157362] [] (show_stack+0x10/0x14) from [] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [] (do_raw_spin_unlock+0x40/0xc8) from [] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [] (_raw_spin_unlock+0x8/0x40) from [] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [] (tasklet_action+0x8c/0xec) [ 5.205673] [] (tasklet_action+0x8c/0xec) from [] (__do_softirq+0xec/0x1d4) [ 5.214347] [] (__do_softirq+0xec/0x1d4) from [] (do_softirq+0x48/0x54) [ 5.222674] [] (do_softirq+0x48/0x54) from [] (irq_exit+0x74/0xc0) [ 5.230573] [] (irq_exit+0x74/0xc0) from [] (handle_IRQ+0x6c/0x90) [ 5.238465] [] (handle_IRQ+0x6c/0x90) from [] (__irq_svc+0x40/0x70) [ 5.246446] [] (__irq_svc+0x40/0x70) from [] (mark_page_accessed+0xc/0x68) [ 5.255034] [] (mark_page_accessed+0xc/0x68) from [] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [] (unmap_single_vma+0x3bc/0x550) from [] (unmap_vmas+0x44/0x54) [ 5.273164] [] (unmap_vmas+0x44/0x54) from [] (exit_mmap+0xc4/0x1e0) [ 5.281233] [] (exit_mmap+0xc4/0x1e0) from [] (mmput+0x3c/0xdc) [ 5.288868] [] (mmput+0x3c/0xdc) from [] (do_exit+0x30c/0x828) [ 5.296413] [] (do_exit+0x30c/0x828) from [] (do_group_exit+0x4c/0xb0) [ 5.304653] [] (do_group_exit+0x4c/0xb0) from [] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li Signed-off-by: Barry Song Cc: stable # 3.12 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sirfsoc_uart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 49a2ffd101a..b7bfe24d4eb 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -542,8 +542,10 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param) wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | SIRFUART_IO_MODE); - sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); spin_unlock_irqrestore(&sirfport->rx_lock, flags); + spin_lock(&port->lock); + sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); + spin_unlock(&port->lock); if (sirfport->rx_io_count == 4) { spin_lock_irqsave(&sirfport->rx_lock, flags); sirfport->rx_io_count = 0; -- cgit v1.2.3-70-g09d2 From e2613be5093d04e6589924d36a1e363eef3c87c7 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 11 Feb 2014 16:34:55 -0500 Subject: n_tty: Fix stale echo output When echoes cannot be flushed to output (usually because the tty has no more write room) and L_ECHO is subsequently turned off, then when L_ECHO is turned back on, stale echoes are output. Output completed echoes regardless of the L_ECHO setting: 1. before normal writes to that tty 2. if the tty was stopped by soft flow control and is being restarted Reported-by: Mikulas Patocka Cc: # 3.13.x Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_tty.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 2747a3b20a5..d15624c1b75 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -817,8 +817,7 @@ static void process_echoes(struct tty_struct *tty) struct n_tty_data *ldata = tty->disc_data; size_t echoed; - if ((!L_ECHO(tty) && !L_ECHONL(tty)) || - ldata->echo_mark == ldata->echo_tail) + if (ldata->echo_mark == ldata->echo_tail) return; mutex_lock(&ldata->output_lock); @@ -1244,7 +1243,8 @@ n_tty_receive_signal_char(struct tty_struct *tty, int signal, unsigned char c) if (L_ECHO(tty)) { echo_char(c, tty); commit_echoes(tty); - } + } else + process_echoes(tty); isig(signal, tty); return; } @@ -1274,7 +1274,7 @@ n_tty_receive_char_special(struct tty_struct *tty, unsigned char c) if (I_IXON(tty)) { if (c == START_CHAR(tty)) { start_tty(tty); - commit_echoes(tty); + process_echoes(tty); return 0; } if (c == STOP_CHAR(tty)) { @@ -1820,8 +1820,10 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) * Fix tty hang when I_IXON(tty) is cleared, but the tty * been stopped by STOP_CHAR(tty) before it. */ - if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { start_tty(tty); + process_echoes(tty); + } /* The termios change make the tty ready for I/O */ if (waitqueue_active(&tty->write_wait)) -- cgit v1.2.3-70-g09d2 From 45a7bd635930baa960b6817674c64bdfb8f39570 Mon Sep 17 00:00:00 2001 From: Joe Schultz Date: Tue, 11 Feb 2014 18:30:01 -0600 Subject: serial: 8250: Support XR17V35x fraction divisor The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz Signed-off-by: Aaron Sierra Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 61ecd709a72..69932b7556c 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2432,6 +2432,24 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, serial_dl_write(up, quot); + /* + * XR17V35x UARTs have an extra fractional divisor register (DLD) + * + * We need to recalculate all of the registers, because DLM and DLL + * are already rounded to a whole integer. + * + * When recalculating we use a 32x clock instead of a 16x clock to + * allow 1-bit for rounding in the fractional part. + */ + if (up->port.type == PORT_XR17V35X) { + unsigned int baud_x32 = (port->uartclk * 2) / baud; + u16 quot = baud_x32 / 32; + u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2); + + serial_dl_write(up, quot); + serial_port_out(port, 0x2, quot_frac & 0xf); + } + /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR * is written without DLAB set, this mode will be disabled. -- cgit v1.2.3-70-g09d2