From 78d80c5a720ea370defa3e3124c0f7f7179bdfe5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 23 May 2012 21:18:46 +0200 Subject: serial/amba-pl011: move custom pin control to driver We had a boot regression in Ux500 in the merge window because two orthogonal pin control schemes for the PL011 were merged at the same time: - One using the .init() and .exit() hooks into the platform for Ux500 putting the pins into default vs sleep state respectively as the port was started/stopped. commit a09806607fd20bed2f8c41fe22793386790a14aa "ARM: ux500: switch to using pinctrl for uart0" - One hogging the default setting at PL011 probe() commit 258e055111d3cde2607e0d04eb91da2f7a59b591 "serial: amba-pl011: adopt pinctrl support" To get a solution that works for both let's scrap the stuff in the platform callbacks, instead have the driver itself select default and sleep states when the port is started/stopped. Hopefully this works for all clients. Platform callbacks are bad for device tree migration anyway, so this rids us of another problem in Ux500. Cc: Shawn Guo Cc: Russell King Reported-by: Lee Jones Signed-off-by: Linus Walleij Tested-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 45 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4ad721fb840..c17923ec6e9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -133,6 +133,10 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; + /* Two optional pin states - default & sleep */ + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_sleep; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ @@ -1312,6 +1316,14 @@ static int pl011_startup(struct uart_port *port) unsigned int cr; int retval; + /* Optionaly enable pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (retval) + dev_err(port->dev, + "could not set default pins\n"); + } + retval = clk_prepare(uap->clk); if (retval) goto out; @@ -1420,6 +1432,7 @@ static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; + int retval; /* * disable all interrupts @@ -1462,6 +1475,14 @@ static void pl011_shutdown(struct uart_port *port) */ clk_disable(uap->clk); clk_unprepare(uap->clk); + /* Optionally let pins go into sleep states */ + if (!IS_ERR(uap->pins_sleep)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); + if (retval) + dev_err(port->dev, + "could not set pins to sleep state\n"); + } + if (uap->port.dev->platform_data) { struct amba_pl011_data *plat; @@ -1792,6 +1813,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + /* Allow pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + ret = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (ret) + dev_err(uap->port.dev, + "could not set default pins\n"); + } + ret = clk_prepare(uap->clk); if (ret) return ret; @@ -1844,7 +1873,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; - struct pinctrl *pinctrl; void __iomem *base; int i, ret; @@ -1869,11 +1897,20 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto free; } - pinctrl = devm_pinctrl_get_select_default(&dev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); + uap->pinctrl = devm_pinctrl_get(&dev->dev); + if (IS_ERR(uap->pinctrl)) { + ret = PTR_ERR(uap->pinctrl); goto unmap; } + uap->pins_default = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(uap->pins_default)) + dev_err(&dev->dev, "could not get default pinstate\n"); + + uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_SLEEP); + if (IS_ERR(uap->pins_sleep)) + dev_dbg(&dev->dev, "could not get sleep pinstate\n"); uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { -- cgit v1.2.3-70-g09d2