From a485df4b4404379786c4bdd258bc528b2617449d Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 14 Oct 2011 10:47:38 +0530 Subject: spi, serial: move to dma_transfer_direction fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: Vinod Koul Cc: Grant Likely Cc: Alan Cox Acked-by: Mika Westerberg --- drivers/tty/serial/amba-pl011.c | 8 ++++---- drivers/tty/serial/pch_uart.c | 4 ++-- drivers/tty/serial/sh-sci.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index f5f6831b0a6..460ff7dbfd6 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -268,7 +268,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_slave_config tx_conf = { .dst_addr = uap->port.mapbase + UART01x_DR, .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_TO_DEVICE, + .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, }; struct dma_chan *chan; @@ -301,7 +301,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_slave_config rx_conf = { .src_addr = uap->port.mapbase + UART01x_DR, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_FROM_DEVICE, + .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 1, }; @@ -480,7 +480,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) return -EBUSY; } - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, + desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); @@ -676,7 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; dma_dev = rxchan->device; desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, - DMA_FROM_DEVICE, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* * If the DMA engine is busy and cannot prepare a diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index b46218d679e..73201a11697 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -747,7 +747,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_address(sg) = priv->rx_buf_dma; desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, - sg, 1, DMA_FROM_DEVICE, + sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) @@ -906,7 +906,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) } desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - priv->sg_tx_p, nent, DMA_TO_DEVICE, + priv->sg_tx_p, nent, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n", diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index dbd32a1286d..3683a69b45e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1207,7 +1207,7 @@ static void sci_submit_rx(struct sci_port *s) struct dma_async_tx_descriptor *desc; desc = chan->device->device_prep_slave_sg(chan, - sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); + sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (desc) { s->desc_rx[i] = desc; @@ -1322,7 +1322,7 @@ static void work_fn_tx(struct work_struct *work) BUG_ON(!sg_dma_len(sg)); desc = chan->device->device_prep_slave_sg(chan, - sg, s->sg_len_tx, DMA_TO_DEVICE, + sg, s->sg_len_tx, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { /* switch to PIO */ -- cgit v1.2.3-70-g09d2 From d57f341ba08c9f34ccd45a89729e73174d4a3325 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 20 Jun 2011 19:26:11 +0200 Subject: SERIAL: AR933X: Add driver for the built-in UART of the SoC This patch adds the driver for the built-in UART of the Atheros AR933X SoCs. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Cc: Kathy Giori Cc: "Luis R. Rodriguez" Cc: Alan Cox Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2526/ Signed-off-by: Alan Cox Signed-off-by: Ralf Baechle --- .../include/asm/mach-ath79/ar933x_uart_platform.h | 18 + drivers/tty/serial/Kconfig | 23 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/ar933x_uart.c | 688 +++++++++++++++++++++ include/linux/serial_core.h | 4 + 5 files changed, 734 insertions(+) create mode 100644 arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h create mode 100644 drivers/tty/serial/ar933x_uart.c (limited to 'drivers/tty') diff --git a/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h new file mode 100644 index 00000000000..6cb30f2b719 --- /dev/null +++ b/arch/mips/include/asm/mach-ath79/ar933x_uart_platform.h @@ -0,0 +1,18 @@ +/* + * Platform data definition for Atheros AR933X UART + * + * Copyright (C) 2011 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _AR933X_UART_PLATFORM_H +#define _AR933X_UART_PLATFORM_H + +struct ar933x_uart_platform_data { + unsigned uartclk; +}; + +#endif /* _AR933X_UART_PLATFORM_H */ diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 925a1e547a8..95a0f5fe7d4 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1610,4 +1610,27 @@ config SERIAL_XILINX_PS_UART_CONSOLE help Enable a Xilinx PS UART port to be the system console. +config SERIAL_AR933X + bool "AR933X serial port support" + depends on SOC_AR933X + select SERIAL_CORE + help + If you have an Atheros AR933X SOC based board and want to use the + built-in UART of the SoC, say Y to this option. + +config SERIAL_AR933X_CONSOLE + bool "Console on AR933X serial port" + depends on SERIAL_AR933X=y + select SERIAL_CORE_CONSOLE + help + Enable a built-in UART port of the AR933X to be the system console. + +config SERIAL_AR933X_NR_UARTS + int "Maximum number of AR933X serial ports" + depends on SERIAL_AR933X + default "2" + help + Set this to the number of serial ports you want the driver + to support. + endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index e10cf5b54b6..76811cc5859 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o +obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c new file mode 100644 index 00000000000..e4f60e2b87f --- /dev/null +++ b/drivers/tty/serial/ar933x_uart.c @@ -0,0 +1,688 @@ +/* + * Atheros AR933X SoC built-in UART driver + * + * Copyright (C) 2011 Gabor Juhos + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRIVER_NAME "ar933x-uart" + +#define AR933X_DUMMY_STATUS_RD 0x01 + +static struct uart_driver ar933x_uart_driver; + +struct ar933x_uart_port { + struct uart_port port; + unsigned int ier; /* shadow Interrupt Enable Register */ +}; + +static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, + int offset) +{ + return readl(up->port.membase + offset); +} + +static inline void ar933x_uart_write(struct ar933x_uart_port *up, + int offset, unsigned int value) +{ + writel(value, up->port.membase + offset); +} + +static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int mask, + unsigned int val) +{ + unsigned int t; + + t = ar933x_uart_read(up, offset); + t &= ~mask; + t |= val; + ar933x_uart_write(up, offset, t); +} + +static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int val) +{ + ar933x_uart_rmw(up, offset, 0, val); +} + +static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, + unsigned int offset, + unsigned int val) +{ + ar933x_uart_rmw(up, offset, val, 0); +} + +static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) +{ + up->ier |= AR933X_UART_INT_TX_EMPTY; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) +{ + up->ier &= ~AR933X_UART_INT_TX_EMPTY; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) +{ + unsigned int rdata; + + rdata = ch & AR933X_UART_DATA_TX_RX_MASK; + rdata |= AR933X_UART_DATA_TX_CSR; + ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); +} + +static unsigned int ar933x_uart_tx_empty(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + unsigned long flags; + unsigned int rdata; + + spin_lock_irqsave(&up->port.lock, flags); + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + spin_unlock_irqrestore(&up->port.lock, flags); + + return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; +} + +static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR; +} + +static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void ar933x_uart_start_tx(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + + ar933x_uart_start_tx_interrupt(up); +} + +static void ar933x_uart_stop_tx(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + + ar933x_uart_stop_tx_interrupt(up); +} + +static void ar933x_uart_stop_rx(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + + up->ier &= ~AR933X_UART_INT_RX_VALID; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); +} + +static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + else + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void ar933x_uart_enable_ms(struct uart_port *port) +{ +} + +static void ar933x_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + unsigned int cs; + unsigned long flags; + unsigned int baud, scale; + + /* Only CS8 is supported */ + new->c_cflag &= ~CSIZE; + new->c_cflag |= CS8; + + /* Only one stop bit is supported */ + new->c_cflag &= ~CSTOPB; + + cs = 0; + if (new->c_cflag & PARENB) { + if (!(new->c_cflag & PARODD)) + cs |= AR933X_UART_CS_PARITY_EVEN; + else + cs |= AR933X_UART_CS_PARITY_ODD; + } else { + cs |= AR933X_UART_CS_PARITY_NONE; + } + + /* Mark/space parity is not supported */ + new->c_cflag &= ~CMSPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + scale = (port->uartclk / (16 * baud)) - 1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* Update the per-port timeout. */ + uart_update_timeout(port, new->c_cflag, baud); + + up->port.ignore_status_mask = 0; + + /* ignore all characters if CREAD is not set */ + if ((new->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; + + ar933x_uart_write(up, AR933X_UART_CLOCK_REG, + scale << AR933X_UART_CLOCK_SCALE_S | 8192); + + /* setup configuration register */ + ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); + + /* enable host interrupt */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_HOST_INT_EN); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty_termios_baud_rate(new)) + tty_termios_encode_baud_rate(new, baud, baud); +} + +static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) +{ + struct tty_struct *tty; + int max_count = 256; + + tty = tty_port_tty_get(&up->port.state->port); + do { + unsigned int rdata; + unsigned char ch; + + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) + break; + + /* remove the character from the FIFO */ + ar933x_uart_write(up, AR933X_UART_DATA_REG, + AR933X_UART_DATA_RX_CSR); + + if (!tty) { + /* discard the data if no tty available */ + continue; + } + + up->port.icount.rx++; + ch = rdata & AR933X_UART_DATA_TX_RX_MASK; + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } while (max_count-- > 0); + + if (tty) { + tty_flip_buffer_push(tty); + tty_kref_put(tty); + } +} + +static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (uart_tx_stopped(&up->port)) + return; + + count = up->port.fifosize; + do { + unsigned int rdata; + + rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) + break; + + if (up->port.x_char) { + ar933x_uart_putc(up, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + ar933x_uart_putc(up, xmit->buf[xmit->tail]); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (!uart_circ_empty(xmit)) + ar933x_uart_start_tx_interrupt(up); +} + +static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) +{ + struct ar933x_uart_port *up = dev_id; + unsigned int status; + + status = ar933x_uart_read(up, AR933X_UART_CS_REG); + if ((status & AR933X_UART_CS_HOST_INT) == 0) + return IRQ_NONE; + + spin_lock(&up->port.lock); + + status = ar933x_uart_read(up, AR933X_UART_INT_REG); + status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); + + if (status & AR933X_UART_INT_RX_VALID) { + ar933x_uart_write(up, AR933X_UART_INT_REG, + AR933X_UART_INT_RX_VALID); + ar933x_uart_rx_chars(up); + } + + if (status & AR933X_UART_INT_TX_EMPTY) { + ar933x_uart_write(up, AR933X_UART_INT_REG, + AR933X_UART_INT_TX_EMPTY); + ar933x_uart_stop_tx_interrupt(up); + ar933x_uart_tx_chars(up); + } + + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static int ar933x_uart_startup(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + unsigned long flags; + int ret; + + ret = request_irq(up->port.irq, ar933x_uart_interrupt, + up->port.irqflags, dev_name(up->port.dev), up); + if (ret) + return ret; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Enable HOST interrupts */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_HOST_INT_EN); + + /* Enable RX interrupts */ + up->ier = AR933X_UART_INT_RX_VALID; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static void ar933x_uart_shutdown(struct uart_port *port) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + + /* Disable all interrupts */ + up->ier = 0; + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); + + /* Disable break condition */ + ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_BREAK); + + free_irq(up->port.irq, up); +} + +static const char *ar933x_uart_type(struct uart_port *port) +{ + return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; +} + +static void ar933x_uart_release_port(struct uart_port *port) +{ + /* Nothing to release ... */ +} + +static int ar933x_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void ar933x_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_AR933X; +} + +static int ar933x_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && + ser->type != PORT_AR933X) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= NR_IRQS) + return -EINVAL; + + if (ser->baud_base < 28800) + return -EINVAL; + + return 0; +} + +static struct uart_ops ar933x_uart_ops = { + .tx_empty = ar933x_uart_tx_empty, + .set_mctrl = ar933x_uart_set_mctrl, + .get_mctrl = ar933x_uart_get_mctrl, + .stop_tx = ar933x_uart_stop_tx, + .start_tx = ar933x_uart_start_tx, + .stop_rx = ar933x_uart_stop_rx, + .enable_ms = ar933x_uart_enable_ms, + .break_ctl = ar933x_uart_break_ctl, + .startup = ar933x_uart_startup, + .shutdown = ar933x_uart_shutdown, + .set_termios = ar933x_uart_set_termios, + .type = ar933x_uart_type, + .release_port = ar933x_uart_release_port, + .request_port = ar933x_uart_request_port, + .config_port = ar933x_uart_config_port, + .verify_port = ar933x_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + +static struct ar933x_uart_port * +ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; + +static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) +{ + unsigned int status; + unsigned int timeout = 60000; + + /* Wait up to 60ms for the character(s) to be sent. */ + do { + status = ar933x_uart_read(up, AR933X_UART_DATA_REG); + if (--timeout == 0) + break; + udelay(1); + } while ((status & AR933X_UART_DATA_TX_CSR) == 0); +} + +static void ar933x_uart_console_putchar(struct uart_port *port, int ch) +{ + struct ar933x_uart_port *up = (struct ar933x_uart_port *) port; + + ar933x_uart_wait_xmitr(up); + ar933x_uart_putc(up, ch); +} + +static void ar933x_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct ar933x_uart_port *up = ar933x_console_ports[co->index]; + unsigned long flags; + unsigned int int_en; + int locked = 1; + + local_irq_save(flags); + + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); + + uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + ar933x_uart_wait_xmitr(up); + ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); + + ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); + + if (locked) + spin_unlock(&up->port.lock); + + local_irq_restore(flags); +} + +static int ar933x_uart_console_setup(struct console *co, char *options) +{ + struct ar933x_uart_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) + return -EINVAL; + + up = ar933x_console_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console ar933x_uart_console = { + .name = "ttyATH", + .write = ar933x_uart_console_write, + .device = uart_console_device, + .setup = ar933x_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ar933x_uart_driver, +}; + +static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) +{ + ar933x_console_ports[up->port.line] = up; +} + +#define AR933X_SERIAL_CONSOLE (&ar933x_uart_console) + +#else + +static inline void ar933x_uart_add_console_port(struct ar933x_uart_port *up) {} + +#define AR933X_SERIAL_CONSOLE NULL + +#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ + +static struct uart_driver ar933x_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyATH", + .nr = CONFIG_SERIAL_AR933X_NR_UARTS, + .cons = AR933X_SERIAL_CONSOLE, +}; + +static int __devinit ar933x_uart_probe(struct platform_device *pdev) +{ + struct ar933x_uart_platform_data *pdata; + struct ar933x_uart_port *up; + struct uart_port *port; + struct resource *mem_res; + struct resource *irq_res; + int id; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -EINVAL; + + id = pdev->id; + if (id == -1) + id = 0; + + if (id > CONFIG_SERIAL_AR933X_NR_UARTS) + return -EINVAL; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + dev_err(&pdev->dev, "no MEM resource\n"); + return -EINVAL; + } + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq_res) { + dev_err(&pdev->dev, "no IRQ resource\n"); + return -EINVAL; + } + + up = kzalloc(sizeof(struct ar933x_uart_port), GFP_KERNEL); + if (!up) + return -ENOMEM; + + port = &up->port; + port->mapbase = mem_res->start; + + port->membase = ioremap(mem_res->start, AR933X_UART_REGS_SIZE); + if (!port->membase) { + ret = -ENOMEM; + goto err_free_up; + } + + port->line = id; + port->irq = irq_res->start; + port->dev = &pdev->dev; + port->type = PORT_AR933X; + port->iotype = UPIO_MEM32; + port->uartclk = pdata->uartclk; + + port->regshift = 2; + port->fifosize = AR933X_UART_FIFO_SIZE; + port->ops = &ar933x_uart_ops; + + ar933x_uart_add_console_port(up); + + ret = uart_add_one_port(&ar933x_uart_driver, &up->port); + if (ret) + goto err_unmap; + + platform_set_drvdata(pdev, up); + return 0; + +err_unmap: + iounmap(up->port.membase); +err_free_up: + kfree(up); + return ret; +} + +static int __devexit ar933x_uart_remove(struct platform_device *pdev) +{ + struct ar933x_uart_port *up; + + up = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, NULL); + + if (up) { + uart_remove_one_port(&ar933x_uart_driver, &up->port); + iounmap(up->port.membase); + kfree(up); + } + + return 0; +} + +static struct platform_driver ar933x_uart_platform_driver = { + .probe = ar933x_uart_probe, + .remove = __devexit_p(ar933x_uart_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init ar933x_uart_init(void) +{ + int ret; + + ar933x_uart_driver.nr = CONFIG_SERIAL_AR933X_NR_UARTS; + ret = uart_register_driver(&ar933x_uart_driver); + if (ret) + goto err_out; + + ret = platform_driver_register(&ar933x_uart_platform_driver); + if (ret) + goto err_unregister_uart_driver; + + return 0; + +err_unregister_uart_driver: + uart_unregister_driver(&ar933x_uart_driver); +err_out: + return ret; +} + +static void __exit ar933x_uart_exit(void) +{ + platform_driver_unregister(&ar933x_uart_platform_driver); + uart_unregister_driver(&ar933x_uart_driver); +} + +module_init(ar933x_uart_init); +module_exit(ar933x_uart_exit); + +MODULE_DESCRIPTION("Atheros AR933X UART driver"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index eadf33d0abb..3c35fb2f688 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -207,6 +207,10 @@ /* Xilinx PSS UART */ #define PORT_XUARTPS 98 +/* Atheros AR933X SoC */ +#define PORT_AR933X 99 + + #ifdef __KERNEL__ #include -- cgit v1.2.3-70-g09d2 From 90ab5ee94171b3e28de6bb42ee30b527014e0be7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 13 Jan 2012 09:32:20 +1030 Subject: module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell --- drivers/accessibility/braille/braille_console.c | 2 +- drivers/acpi/acpica/acglobal.h | 2 +- drivers/acpi/apei/ghes.c | 2 +- drivers/acpi/apei/hest.c | 2 +- drivers/acpi/dock.c | 2 +- drivers/acpi/pci_slot.c | 2 +- drivers/acpi/video.c | 6 +++--- drivers/ata/sata_nv.c | 6 +++--- drivers/ata/sata_sil24.c | 2 +- drivers/atm/he.c | 6 +++--- drivers/block/drbd/drbd_int.h | 4 ++-- drivers/block/drbd/drbd_main.c | 4 ++-- drivers/block/paride/bpck6.c | 5 ++--- drivers/block/paride/pd.c | 3 ++- drivers/block/paride/pf.c | 4 +++- drivers/block/paride/pg.c | 3 ++- drivers/block/paride/pt.c | 4 +++- drivers/block/xd.c | 2 +- drivers/bluetooth/btusb.c | 12 ++++++------ drivers/bluetooth/hci_bcsp.c | 4 ++-- drivers/bluetooth/hci_ldisc.c | 2 +- drivers/cdrom/cdrom.c | 12 ++++++------ drivers/char/agp/amd64-agp.c | 2 +- drivers/char/agp/sis-agp.c | 2 +- drivers/char/i8k.c | 8 ++++---- drivers/char/ipmi/ipmi_si_intf.c | 2 +- drivers/char/lp.c | 2 +- drivers/char/nwflash.c | 2 +- drivers/char/pcmcia/synclink_cs.c | 2 +- drivers/char/random.c | 2 +- drivers/char/tpm/tpm_tis.c | 6 +++--- drivers/edac/r82600_edac.c | 2 +- drivers/firewire/sbp2.c | 2 +- drivers/hid/hid-prodikeys.c | 2 +- drivers/hwmon/abituguru.c | 2 +- drivers/hwmon/abituguru3.c | 4 ++-- drivers/hwmon/acpi_power_meter.c | 2 +- drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/ads7828.c | 4 ++-- drivers/hwmon/dme1737.c | 4 ++-- drivers/hwmon/it87.c | 4 ++-- drivers/hwmon/lm93.c | 4 ++-- drivers/hwmon/max1668.c | 2 +- drivers/hwmon/w83627hf.c | 2 +- drivers/hwmon/w83781d.c | 4 ++-- drivers/hwmon/w83791d.c | 4 ++-- drivers/hwmon/w83792d.c | 2 +- drivers/hwmon/w83793.c | 2 +- drivers/hwmon/w83795.c | 2 +- drivers/hwmon/w83l786ng.c | 2 +- drivers/i2c/busses/i2c-highlander.c | 2 +- drivers/i2c/busses/i2c-ibm_iic.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 4 ++-- drivers/i2c/busses/i2c-viapro.c | 2 +- drivers/ide/ali14xx.c | 2 +- drivers/ide/cmd640.c | 2 +- drivers/ide/dtc2278.c | 2 +- drivers/ide/gayle.c | 2 +- drivers/ide/ht6560b.c | 2 +- drivers/ide/ide-4drives.c | 2 +- drivers/ide/ide-acpi.c | 6 +++--- drivers/ide/ide-pci-generic.c | 2 +- drivers/ide/qd65xx.c | 2 +- drivers/ide/umc8672.c | 2 +- drivers/infiniband/hw/ehca/ehca_classes.h | 4 ++-- drivers/infiniband/hw/ehca/ehca_main.c | 8 ++++---- drivers/infiniband/hw/nes/nes.c | 2 +- drivers/input/joystick/xpad.c | 6 +++--- drivers/input/misc/wistron_btns.c | 2 +- drivers/input/mouse/psmouse-base.c | 2 +- drivers/input/mouse/synaptics_i2c.c | 6 +++--- drivers/input/serio/hp_sdc.c | 2 +- drivers/input/touchscreen/eeti_ts.c | 4 ++-- drivers/input/touchscreen/htcpen.c | 4 ++-- drivers/input/touchscreen/ucb1400_ts.c | 2 +- drivers/input/touchscreen/usbtouchscreen.c | 4 ++-- drivers/isdn/hardware/avm/b1dma.c | 2 +- drivers/isdn/hardware/avm/c4.c | 2 +- drivers/isdn/sc/init.c | 2 +- drivers/leds/leds-clevo-mail.c | 2 +- drivers/leds/leds-ss4200.c | 2 +- drivers/macintosh/ams/ams-core.c | 2 +- drivers/macintosh/ams/ams-input.c | 4 ++-- drivers/macintosh/therm_adt746x.c | 2 +- drivers/media/dvb/dvb-usb/af9005.c | 2 +- drivers/media/dvb/dvb-usb/af9005.h | 2 +- drivers/media/radio/radio-gemtek.c | 10 +++++----- drivers/media/radio/radio-miropcm20.c | 2 +- drivers/media/rc/lirc_dev.c | 2 +- drivers/media/rc/mceusb.c | 4 ++-- drivers/media/rc/streamzap.c | 4 ++-- drivers/media/rc/winbond-cir.c | 4 ++-- drivers/media/video/c-qcam.c | 2 +- drivers/media/video/cs5345.c | 2 +- drivers/media/video/cs53l32a.c | 2 +- drivers/media/video/cx18/cx18-driver.c | 2 +- drivers/media/video/cx25821/cx25821-alsa.c | 2 +- drivers/media/video/cx88/cx88-alsa.c | 2 +- drivers/media/video/gspca/m5602/m5602_core.c | 4 ++-- drivers/media/video/gspca/m5602/m5602_mt9m111.h | 2 +- drivers/media/video/gspca/m5602/m5602_ov7660.h | 2 +- drivers/media/video/gspca/m5602/m5602_ov9650.h | 2 +- drivers/media/video/gspca/m5602/m5602_po1030.h | 2 +- drivers/media/video/gspca/m5602/m5602_s5k4aa.h | 2 +- drivers/media/video/gspca/m5602/m5602_s5k83a.h | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 4 ++-- drivers/media/video/hdpvr/hdpvr-core.c | 2 +- drivers/media/video/ivtv/ivtv-driver.c | 2 +- drivers/media/video/ivtv/ivtvfb.c | 2 +- drivers/media/video/marvell-ccic/mcam-core.c | 6 +++--- drivers/media/video/msp3400-driver.c | 6 +++--- drivers/media/video/msp3400-driver.h | 6 +++--- drivers/media/video/omap/omap_vout.c | 6 +++--- drivers/media/video/omap/omap_vout_vrfb.c | 2 +- drivers/media/video/ov7670.c | 2 +- drivers/media/video/saa7115.c | 2 +- drivers/media/video/stk-webcam.c | 4 ++-- drivers/media/video/tm6000/tm6000-alsa.c | 2 +- drivers/media/video/tvp514x.c | 2 +- drivers/media/video/tvp7002.c | 2 +- drivers/media/video/upd64083.c | 2 +- drivers/media/video/via-camera.c | 4 ++-- drivers/media/video/zoran/zoran_device.c | 2 +- drivers/media/video/zoran/zr36060.c | 2 +- drivers/memstick/host/jmb38x_ms.c | 2 +- drivers/memstick/host/r592.c | 2 +- drivers/memstick/host/tifm_ms.c | 2 +- drivers/misc/iwmc3200top/main.c | 12 ++++++------ drivers/mmc/core/core.c | 6 +++--- drivers/mmc/core/core.h | 2 +- drivers/mmc/host/tifm_sd.c | 4 ++-- drivers/mmc/host/vub300.c | 10 +++++----- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/mtd/nand/r852.c | 2 +- drivers/parport/parport_ip32.c | 2 +- drivers/pci/hotplug/acpi_pcihp.c | 2 +- drivers/pci/hotplug/acpiphp_core.c | 2 +- drivers/pci/hotplug/acpiphp_ibm.c | 2 +- drivers/pci/hotplug/cpcihp_zt5550.c | 4 ++-- drivers/pci/hotplug/cpqphp_core.c | 4 ++-- drivers/pci/hotplug/ibmphp_core.c | 2 +- drivers/pci/hotplug/pci_hotplug_core.c | 2 +- drivers/pci/hotplug/pciehp.h | 6 +++--- drivers/pci/hotplug/pciehp_core.c | 6 +++--- drivers/pci/hotplug/pcihp_skeleton.c | 2 +- drivers/pci/hotplug/rpaphp.h | 2 +- drivers/pci/hotplug/rpaphp_core.c | 2 +- drivers/pci/hotplug/shpchp.h | 4 ++-- drivers/pci/hotplug/shpchp_core.c | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 4 ++-- drivers/pcmcia/yenta_socket.c | 6 +++--- drivers/platform/x86/compal-laptop.c | 2 +- drivers/platform/x86/intel_oaktrail.c | 2 +- drivers/platform/x86/msi-laptop.c | 2 +- drivers/platform/x86/samsung-laptop.c | 4 ++-- drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++-------- drivers/platform/x86/wmi.c | 4 ++-- drivers/power/ds2760_battery.c | 2 +- drivers/s390/char/raw3270.c | 2 +- drivers/s390/char/vmwatchdog.c | 4 ++-- drivers/scsi/aha1542.c | 2 +- drivers/scsi/dc395x.c | 2 +- drivers/scsi/nsp32.c | 4 ++-- drivers/scsi/pcmcia/nsp_cs.c | 2 +- drivers/staging/comedi/comedi_fops.c | 2 +- drivers/staging/comedi/comedi_fops.h | 3 ++- drivers/staging/media/go7007/snd-go7007.c | 2 +- drivers/staging/media/lirc/lirc_bt829.c | 2 +- drivers/staging/media/lirc/lirc_igorplugusb.c | 4 ++-- drivers/staging/media/lirc/lirc_parallel.c | 4 ++-- drivers/staging/media/lirc/lirc_serial.c | 10 +++++----- drivers/staging/media/lirc/lirc_sir.c | 2 +- drivers/staging/media/lirc/lirc_zilog.c | 4 ++-- drivers/staging/quatech_usb2/quatech_usb2.c | 2 +- drivers/staging/serqt_usb2/serqt_usb2.c | 2 +- drivers/staging/speakup/speakup.h | 2 +- drivers/staging/speakup/synth.c | 2 +- drivers/staging/vme/bridges/vme_tsi148.c | 2 +- drivers/tty/rocket.c | 2 +- drivers/tty/synclink.c | 2 +- drivers/tty/synclinkmp.c | 2 +- drivers/usb/atm/speedtch.c | 6 +++--- drivers/usb/atm/ueagle-atm.c | 2 +- drivers/usb/core/devio.c | 2 +- drivers/usb/core/hub.c | 8 ++++---- drivers/usb/core/usb.c | 2 +- drivers/usb/gadget/amd5536udc.c | 8 ++++---- drivers/usb/gadget/ether.c | 4 ++-- drivers/usb/gadget/file_storage.c | 10 +++++----- drivers/usb/gadget/net2272.c | 2 +- drivers/usb/gadget/net2280.c | 6 +++--- drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/gadget/pch_udc.c | 2 +- drivers/usb/gadget/serial.c | 4 ++-- drivers/usb/gadget/zero.c | 2 +- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ohci-hcd.c | 4 ++-- drivers/usb/host/oxu210hp-hcd.c | 2 +- drivers/usb/host/u132-hcd.c | 2 +- drivers/usb/host/uhci-hcd.c | 2 +- drivers/usb/misc/ftdi-elan.c | 2 +- drivers/usb/misc/iowarrior.c | 2 +- drivers/usb/musb/cppi_dma.c | 2 +- drivers/usb/musb/musb_core.c | 2 +- drivers/usb/serial/aircable.c | 2 +- drivers/usb/serial/ark3116.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/ch341.c | 2 +- drivers/usb/serial/cp210x.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/cypress_m8.c | 6 +++--- drivers/usb/serial/digi_acceleport.c | 2 +- drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/funsoft.c | 2 +- drivers/usb/serial/garmin_gps.c | 2 +- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_ti.c | 4 ++-- drivers/usb/serial/ipaq.c | 2 +- drivers/usb/serial/ipw.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/usb/serial/iuu_phoenix.c | 6 +++--- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/serial/keyspan_pda.c | 2 +- drivers/usb/serial/kl5kusb105.c | 2 +- drivers/usb/serial/mct_u232.c | 2 +- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/serial/mos7840.c | 2 +- drivers/usb/serial/navman.c | 2 +- drivers/usb/serial/omninet.c | 2 +- drivers/usb/serial/opticon.c | 2 +- drivers/usb/serial/option.c | 2 +- drivers/usb/serial/oti6858.c | 2 +- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/qcserial.c | 2 +- drivers/usb/serial/safe_serial.c | 6 +++--- drivers/usb/serial/sierra.c | 4 ++-- drivers/usb/serial/spcp8x5.c | 2 +- drivers/usb/serial/ssu100.c | 2 +- drivers/usb/serial/symbolserial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 2 +- drivers/usb/serial/usb-serial.c | 2 +- drivers/usb/serial/usb_wwan.c | 2 +- drivers/usb/serial/visor.c | 2 +- drivers/usb/serial/whiteheat.c | 2 +- drivers/video/aty/atyfb_base.c | 4 ++-- drivers/video/aty/radeon_base.c | 18 +++++++++--------- drivers/video/cirrusfb.c | 2 +- drivers/video/hgafb.c | 2 +- drivers/video/intelfb/intelfbdrv.c | 16 ++++++++-------- drivers/video/logo/logo.c | 2 +- drivers/video/neofb.c | 10 +++++----- drivers/video/omap/omapfb_main.c | 4 ++-- drivers/video/omap2/dss/core.c | 2 +- drivers/video/omap2/dss/dsi.c | 4 ++-- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/omapfb/omapfb-main.c | 8 ++++---- drivers/video/omap2/omapfb/omapfb.h | 2 +- drivers/video/pm2fb.c | 8 ++++---- drivers/video/pm3fb.c | 4 ++-- drivers/video/riva/fbdev.c | 6 +++--- drivers/video/smscufx.c | 4 ++-- drivers/video/sstfb.c | 6 +++--- drivers/video/tdfxfb.c | 2 +- drivers/video/udlfb.c | 6 +++--- drivers/video/uvesafb.c | 6 +++--- drivers/video/vfb.c | 2 +- drivers/watchdog/f71808e_wdt.c | 2 +- drivers/watchdog/mpc8xxx_wdt.c | 2 +- drivers/xen/xen-pciback/conf_space.c | 2 +- drivers/xen/xen-pciback/xenbus.c | 2 +- fs/lockd/mon.c | 2 +- fs/nfs/client.c | 2 +- fs/nfs/inode.c | 2 +- include/acpi/acpixf.h | 2 +- include/acpi/apei.h | 4 ++-- include/linux/console.h | 2 +- include/linux/lockd/lockd.h | 2 +- include/linux/mmc/host.h | 2 +- security/apparmor/include/apparmor.h | 10 +++++----- security/apparmor/lsm.c | 12 ++++++------ virt/kvm/iommu.c | 2 +- 283 files changed, 471 insertions(+), 465 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/accessibility/braille/braille_console.c b/drivers/accessibility/braille/braille_console.c index cb423f5aef2..c339a0880e6 100644 --- a/drivers/accessibility/braille/braille_console.c +++ b/drivers/accessibility/braille/braille_console.c @@ -44,7 +44,7 @@ MODULE_LICENSE("GPL"); */ /* Emit various sounds */ -static int sound; +static bool sound; module_param(sound, bool, 0); MODULE_PARM_DESC(sound, "emit sounds"); diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 76dc02f1557..e6652d716e4 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -108,7 +108,7 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE); /* * Optionally enable output from the AML Debug Object. */ -u32 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE); +bool ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE); /* * Optionally copy the entire DSDT to local memory (instead of simply diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index b8e08cb67a1..ebaf037a787 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -118,7 +118,7 @@ struct ghes_estatus_cache { struct rcu_head rcu; }; -int ghes_disable; +bool ghes_disable; module_param_named(disable, ghes_disable, bool, 0); static int ghes_panic_timeout __read_mostly = 30; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 05fee06f4d6..ee7fddc4665 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -41,7 +41,7 @@ #define HEST_PFX "HEST: " -int hest_disable; +bool hest_disable; EXPORT_SYMBOL_GPL(hest_disable); /* HEST table parsing */ diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 19a61136d84..88eb1430466 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -43,7 +43,7 @@ MODULE_AUTHOR("Kristen Carlson Accardi"); MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION); MODULE_LICENSE("GPL"); -static int immediate_undock = 1; +static bool immediate_undock = 1; module_param(immediate_undock, bool, 0644); MODULE_PARM_DESC(immediate_undock, "1 (default) will cause the driver to " "undock immediately when the undock button is pressed, 0 will cause" diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c index 07f7fea8a4e..e50e31a518a 100644 --- a/drivers/acpi/pci_slot.c +++ b/drivers/acpi/pci_slot.c @@ -34,7 +34,7 @@ #include #include -static int debug; +static bool debug; static int check_sta_before_sun; #define DRIVER_VERSION "0.1" diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 08a44b532f7..eaef02afc7c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -69,21 +69,21 @@ MODULE_AUTHOR("Bruno Ducrot"); MODULE_DESCRIPTION("ACPI Video Driver"); MODULE_LICENSE("GPL"); -static int brightness_switch_enabled = 1; +static bool brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); /* * By default, we don't allow duplicate ACPI video bus devices * under the same VGA controller */ -static int allow_duplicates; +static bool allow_duplicates; module_param(allow_duplicates, bool, 0644); /* * Some BIOSes claim they use minimum backlight at boot, * and this may bring dimming screen after boot */ -static int use_bios_initial_backlight = 1; +static bool use_bios_initial_backlight = 1; module_param(use_bios_initial_backlight, bool, 0644); static int register_count = 0; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index e0bc9646a38..55d6179dde5 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -599,9 +599,9 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, nv_pci_tbl); MODULE_VERSION(DRV_VERSION); -static int adma_enabled; -static int swncq_enabled = 1; -static int msi_enabled; +static bool adma_enabled; +static bool swncq_enabled = 1; +static bool msi_enabled; static void nv_adma_register_mode(struct ata_port *ap) { diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 1e9140626a8..e7e610aa9a7 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -417,7 +417,7 @@ static struct ata_port_operations sil24_ops = { #endif }; -static int sata_sil24_msi; /* Disable MSI */ +static bool sata_sil24_msi; /* Disable MSI */ module_param_named(msi, sata_sil24_msi, bool, S_IRUGO); MODULE_PARM_DESC(msi, "Enable MSI (Default: false)"); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 9a51df4f5b7..b182c2f7d77 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -112,12 +112,12 @@ static u8 read_prom_byte(struct he_dev *he_dev, int addr); /* globals */ static struct he_dev *he_devs; -static int disable64; +static bool disable64; static short nvpibits = -1; static short nvcibits = -1; static short rx_skb_reserve = 16; -static int irq_coalesce = 1; -static int sdh = 0; +static bool irq_coalesce = 1; +static bool sdh = 0; /* Read from EEPROM = 0000 0011b */ static unsigned int readtab[] = { diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 9cf20355cee..8d680562ba7 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -59,8 +59,8 @@ /* module parameter, defined in drbd_main.c */ extern unsigned int minor_count; -extern int disable_sendpage; -extern int allow_oos; +extern bool disable_sendpage; +extern bool allow_oos; extern unsigned int cn_idx; #ifdef CONFIG_DRBD_FAULT_INJECTION diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 0358e55356c..211fc44f84b 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -117,8 +117,8 @@ module_param(fault_devs, int, 0644); /* module parameter, defined */ unsigned int minor_count = DRBD_MINOR_COUNT_DEF; -int disable_sendpage; -int allow_oos; +bool disable_sendpage; +bool allow_oos; unsigned int cn_idx = CN_IDX_DRBD; int proc_details; /* Detail level in proc drbd*/ diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c index ad124525ac2..ec64e7f5d1c 100644 --- a/drivers/block/paride/bpck6.c +++ b/drivers/block/paride/bpck6.c @@ -20,9 +20,6 @@ */ -/* PARAMETERS */ -static int verbose; /* set this to 1 to see debugging messages and whatnot */ - #define BACKPACK_VERSION "2.0.2" #include @@ -36,6 +33,8 @@ static int verbose; /* set this to 1 to see debugging messages and whatnot */ #include "ppc6lnx.c" #include "paride.h" +/* PARAMETERS */ +static bool verbose; /* set this to 1 to see debugging messages and whatnot */ #define PPCSTRUCT(pi) ((Interface *)(pi->private)) diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 869e7676d46..831e3ac156e 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -124,8 +124,9 @@ by default. */ +#include -static int verbose = 0; +static bool verbose = 0; static int major = PD_MAJOR; static char *name = PD_NAME; static int cluster = 64; diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index f21b520ef41..ec8f9ed6326 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -118,13 +118,15 @@ #define PF_NAME "pf" #define PF_UNITS 4 +#include + /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is off by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PF_MAJOR; static char *name = PF_NAME; static int cluster = 64; diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index a79fb4f7ff6..4a27b1de5fc 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -130,13 +130,14 @@ #define PI_PG 4 #endif +#include /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is 0 by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PG_MAJOR; static char *name = PG_NAME; static int disable = 0; diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index 7179f79d746..2596042eb98 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -109,13 +109,15 @@ #define PT_NAME "pt" #define PT_UNITS 4 +#include + /* Here are things one can override from the insmod command. Most are autoprobed by paride unless set here. Verbose is on by default. */ -static int verbose = 0; +static bool verbose = 0; static int major = PT_MAJOR; static char *name = PT_NAME; static int disable = 0; diff --git a/drivers/block/xd.c b/drivers/block/xd.c index 4abd2bcd20f..51a972704db 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -148,7 +148,7 @@ static volatile int xdc_busy; static struct timer_list xd_watchdog_int; static volatile u_char xd_error; -static int nodma = XD_DONT_USE_DMA; +static bool nodma = XD_DONT_USE_DMA; static struct request_queue *xd_queue; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 55ac349695c..f00f596c102 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -37,13 +37,13 @@ #define VERSION "0.6" -static int ignore_dga; -static int ignore_csr; -static int ignore_sniffer; -static int disable_scofix; -static int force_scofix; +static bool ignore_dga; +static bool ignore_csr; +static bool ignore_sniffer; +static bool disable_scofix; +static bool force_scofix; -static int reset = 1; +static bool reset = 1; static struct usb_driver btusb_driver; diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 9c5b2dc38e2..a767d4de45a 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -49,8 +49,8 @@ #define VERSION "0.3" -static int txcrc = 1; -static int hciextn = 1; +static bool txcrc = 1; +static bool hciextn = 1; #define BCSP_TXWINSIZE 4 diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 48ad2a7ab08..07114489994 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -48,7 +48,7 @@ #define VERSION "2.2" -static int reset = 0; +static bool reset = 0; static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO]; diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 2118211aff9..1bbf7645a97 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -285,17 +285,17 @@ #include /* used to tell the module to turn on full debugging messages */ -static int debug; +static bool debug; /* used to keep tray locked at all times */ static int keeplocked; /* default compatibility mode */ -static int autoclose=1; -static int autoeject; -static int lockdoor = 1; +static bool autoclose=1; +static bool autoeject; +static bool lockdoor = 1; /* will we ever get to use this... sigh. */ -static int check_media_type; +static bool check_media_type; /* automatically restart mrw format */ -static int mrw_format_restart = 1; +static bool mrw_format_restart = 1; module_param(debug, bool, 0); module_param(autoclose, bool, 0); module_param(autoeject, bool, 0); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 780498d7658..444f8b6ab41 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -33,7 +33,7 @@ #define ULI_X86_64_ENU_SCR_REG 0x54 static struct resource *aperture_resource; -static int __initdata agp_try_unsupported = 1; +static bool __initdata agp_try_unsupported = 1; static int agp_bridges_found; static void amd64_tlbflush(struct agp_memory *temp) diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c index 29aacd81de7..08704ae5395 100644 --- a/drivers/char/agp/sis-agp.c +++ b/drivers/char/agp/sis-agp.c @@ -17,7 +17,7 @@ #define PCI_DEVICE_ID_SI_662 0x0662 #define PCI_DEVICE_ID_SI_671 0x0671 -static int __devinitdata agp_sis_force_delay = 0; +static bool __devinitdata agp_sis_force_delay = 0; static int __devinitdata agp_sis_agp_spec = -1; static int sis_fetch_size(void) diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 6e40072fbf6..40cc0cf2ded 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -69,19 +69,19 @@ MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops"); MODULE_LICENSE("GPL"); -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force loading without checking for supported models"); -static int ignore_dmi; +static bool ignore_dmi; module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); -static int restricted; +static bool restricted; module_param(restricted, bool, 0); MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); -static int power_status; +static bool power_status; module_param(power_status, bool, 0600); MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 9397ab49b72..50fcf9c0456 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1227,7 +1227,7 @@ static int smi_num; /* Used to sequence the SMIs */ #define DEFAULT_REGSPACING 1 #define DEFAULT_REGSIZE 1 -static int si_trydefaults = 1; +static bool si_trydefaults = 1; static char *si_type[SI_MAX_PARMS]; #define MAX_SI_TYPE_STR 30 static char si_type_str[MAX_SI_TYPE_STR]; diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 97c3edb95ae..f4348560706 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -829,7 +829,7 @@ static struct console lpcons = { static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC }; static char *parport[LP_NO]; -static int reset; +static bool reset; module_param_array(parport, charp, NULL, 0); module_param(reset, bool, 0); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index a12f52400db..bf586ae1ee8 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -51,7 +51,7 @@ static int write_block(unsigned long p, const char __user *buf, int count); #define KFLASH_ID 0x89A6 //Intel flash #define KFLASH_ID4 0xB0D4 //Intel flash 4Meg -static int flashdebug; //if set - we will display progress msgs +static bool flashdebug; //if set - we will display progress msgs static int gbWriteEnable; static int gbWriteBase64Enable; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 15781396af2..07f6a5abe37 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -439,7 +439,7 @@ static int mgslpc_device_count = 0; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load=0; +static bool break_on_load=0; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/char/random.c b/drivers/char/random.c index 85da8740586..732215b805c 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -387,7 +387,7 @@ static DECLARE_WAIT_QUEUE_HEAD(random_write_wait); static struct fasync_struct *fasync; #if 0 -static int debug; +static bool debug; module_param(debug, bool, 0644); #define DEBUG_ENT(fmt, arg...) do { \ if (debug) \ diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 10cc44ceb5d..a1748621111 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -255,7 +255,7 @@ out: return size; } -static int itpm; +static bool itpm; module_param(itpm, bool, 0444); MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)"); @@ -500,7 +500,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id) return IRQ_HANDLED; } -static int interrupts = 1; +static bool interrupts = 1; module_param(interrupts, bool, 0444); MODULE_PARM_DESC(interrupts, "Enable interrupts"); @@ -828,7 +828,7 @@ static struct platform_driver tis_drv = { static struct platform_device *pdev; -static int force; +static bool force; module_param(force, bool, 0444); MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry"); static int __init init_tis(void) diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c index b153674431f..e294e1b3616 100644 --- a/drivers/edac/r82600_edac.c +++ b/drivers/edac/r82600_edac.c @@ -131,7 +131,7 @@ struct r82600_error_info { u32 eapr; }; -static unsigned int disable_hardware_scrub; +static bool disable_hardware_scrub; static struct edac_pci_ctl_info *r82600_pci; diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 68375bc3aef..80e95aa3bf1 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -66,7 +66,7 @@ * * Concurrent logins are useful together with cluster filesystems. */ -static int sbp2_param_exclusive_login = 1; +static bool sbp2_param_exclusive_login = 1; module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644); MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device " "(default = Y, use N for concurrent initiators)"); diff --git a/drivers/hid/hid-prodikeys.c b/drivers/hid/hid-prodikeys.c index f779009104e..b71b77ab0dc 100644 --- a/drivers/hid/hid-prodikeys.c +++ b/drivers/hid/hid-prodikeys.c @@ -90,7 +90,7 @@ static const char longname[] = "Prodikeys PC-MIDI Keyboard"; static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; module_param_array(index, int, NULL, 0444); module_param_array(id, charp, NULL, 0444); diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 65a35cf5b3c..3b728e8f169 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -145,7 +145,7 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 }; /* Insmod parameters */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Set to one to force detection."); static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1, diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index d30855a7578..34a14a77e00 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -603,11 +603,11 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { /* Insmod parameters */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Set to one to force detection."); /* Default verbose is 1, since this driver is still in the testing phase */ -static int verbose = 1; +static bool verbose = 1; module_param(verbose, bool, 0644); MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting"); diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 522860ab6ce..554f046bcf2 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -58,7 +58,7 @@ ACPI_MODULE_NAME(ACPI_POWER_METER_NAME); #define POWER_ALARM_NAME "power1_alarm" static int cap_in_hardware; -static int force_cap_on; +static bool force_cap_on; static int can_cap_in_hardware(void) { diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 1ad0a885c5a..0158cc35cb2 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -103,7 +103,7 @@ static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only; +static bool read_only; static const struct i2c_device_id adm1021_id[] = { diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index cfcc3b6fb6b..ed60242d6a0 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -48,8 +48,8 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; /* Module parameters */ -static int se_input = 1; /* Default is SE, 0 == diff */ -static int int_vref = 1; /* Default is internal ref ON */ +static bool se_input = 1; /* Default is SE, 0 == diff */ +static bool int_vref = 1; /* Default is internal ref ON */ static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */ module_param(se_input, bool, S_IRUGO); module_param(int_vref, bool, S_IRUGO); diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index d9803958e49..ffb229af786 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -45,7 +45,7 @@ static struct platform_device *pdev; /* Module load parameters */ -static int force_start; +static bool force_start; module_param(force_start, bool, 0); MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs"); @@ -53,7 +53,7 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -static int probe_all_addr; +static bool probe_all_addr; module_param(probe_all_addr, bool, 0); MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " "addresses"); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 38c0b87676d..603ef2af270 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -146,10 +146,10 @@ static inline void superio_exit(void) #define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */ /* Update battery voltage after every reading if true */ -static int update_vbat; +static bool update_vbat; /* Not all BIOSes properly configure the PWM registers */ -static int fix_pwm_polarity; +static bool fix_pwm_polarity; /* Many IT87 constants specified below */ diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 3b43df41861..8bd6c5c9e05 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -151,12 +151,12 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -static int disable_block; +static bool disable_block; module_param(disable_block, bool, 0); MODULE_PARM_DESC(disable_block, "Set to non-zero to disable SMBus block data transactions."); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization."); diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c index 6914195cfd3..88953f99e91 100644 --- a/drivers/hwmon/max1668.c +++ b/drivers/hwmon/max1668.c @@ -59,7 +59,7 @@ static unsigned short max1668_addr_list[] = { #define DEV_ID_MAX1989 0xb /* read only mode module parameter */ -static int read_only; +static bool read_only; module_param(read_only, bool, 0); MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index bde50e34d01..374118f2b9f 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -71,7 +71,7 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -static int init = 1; +static bool init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index 65b685e2c7b..17a8fa2d9ae 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -67,11 +67,11 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); -static int init = 1; +static bool init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 6e5d0ae594b..35aa5149307 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -58,11 +58,11 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset"); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to one to force extra software initialization"); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 9ded133e43f..d3100eab6b2 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -56,7 +56,7 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int init; +static bool init; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to one to force chip initialization"); diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 3cc6fef2208..45ec7e7c3c2 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -61,7 +61,7 @@ module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 3ee398d0e4c..aa58b25565b 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -42,7 +42,7 @@ static const unsigned short normal_i2c[] = { }; -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index 0254e181893..063bd9508d8 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END }; /* Insmod parameters */ -static int reset; +static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended"); diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index 63bb1cc2a04..fa88868cb55 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -52,7 +52,7 @@ struct highlander_i2c_dev { size_t buf_len; }; -static int iic_force_poll, iic_force_normal; +static bool iic_force_poll, iic_force_normal; static int iic_timeout = 1000, iic_read_delay; static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 3c110fbc409..c08ceb957aa 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -51,11 +51,11 @@ MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); MODULE_LICENSE("GPL"); -static int iic_force_poll; +static bool iic_force_poll; module_param(iic_force_poll, bool, 0); MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); -static int iic_force_fast; +static bool iic_force_fast; module_param(iic_force_fast, bool, 0); MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index e6f539e26f6..58893772c3d 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -93,8 +93,8 @@ static struct pci_driver sis630_driver; /* insmod parameters */ -static int high_clock; -static int force; +static bool high_clock; +static bool force; module_param(high_clock, bool, 0); MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz)."); module_param(force, bool, 0); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 0b012f1f8ac..2a62c998044 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -91,7 +91,7 @@ static unsigned short SMBHSTCFG = 0xD2; /* If force is set to anything different from 0, we forcibly enable the VT596. DANGEROUS! */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 25b9fe3a9f8..d3be99fb415 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c @@ -221,7 +221,7 @@ static int __init ali14xx_probe(void) return ide_legacy_device_add(&ali14xx_port_info, 0); } -static int probe_ali14xx; +static bool probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index a81bd757579..14717304b38 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c @@ -111,7 +111,7 @@ #define DRV_NAME "cmd640" -static int cmd640_vlb; +static bool cmd640_vlb; /* * CMD640 specific registers definition. diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index 6929f7fce93..46af4743b3e 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c @@ -130,7 +130,7 @@ static int __init dtc2278_probe(void) return ide_legacy_device_add(&dtc2278_port_info, 0); } -static int probe_dtc2278; +static bool probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c index 3feaa26410b..51beb85250d 100644 --- a/drivers/ide/gayle.c +++ b/drivers/ide/gayle.c @@ -50,7 +50,7 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) -static int ide_doubler; +static bool ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index 808bcdcbf8e..986f2513eab 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -317,7 +317,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive) ide_set_drivedata(drive, (void *)t); } -static int probe_ht6560b; +static bool probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); diff --git a/drivers/ide/ide-4drives.c b/drivers/ide/ide-4drives.c index 979d342c338..547d7cf2e01 100644 --- a/drivers/ide/ide-4drives.c +++ b/drivers/ide/ide-4drives.c @@ -6,7 +6,7 @@ #define DRV_NAME "ide-4drives" -static int probe_4drives; +static bool probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index f22edc66b03..f1a6796b165 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -53,15 +53,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -static int ide_noacpi; +static bool ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -static int ide_acpigtf; +static bool ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -static int ide_acpionboot; +static bool ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index a743e68a890..7f56b738d76 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -28,7 +28,7 @@ #define DRV_NAME "ide_pci_generic" -static int ide_generic_all; /* Set to claim all devices */ +static bool ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 3f0244fd8e6..8bbfe5557c7 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c @@ -417,7 +417,7 @@ static int __init qd_probe(int base) return rc; } -static int probe_qd65xx; +static bool probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 47adcd09cb2..5cfb7812066 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c @@ -160,7 +160,7 @@ static int __init umc8672_probe(void) return ide_legacy_device_add(&umc8672_port_info, 0); } -static int probe_umc8672; +static bool probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index aaf6023a483..f08f6eaf3fa 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -379,8 +379,8 @@ extern spinlock_t shca_list_lock; extern int ehca_static_rate; extern int ehca_port_act_time; -extern int ehca_use_hp_mr; -extern int ehca_scaling_code; +extern bool ehca_use_hp_mr; +extern bool ehca_scaling_code; extern int ehca_lock_hcalls; extern int ehca_nr_ports; extern int ehca_max_cq; diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 8af8d4f7bdb..832e7a7d0ae 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -59,16 +59,16 @@ MODULE_AUTHOR("Christoph Raisch "); MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver"); MODULE_VERSION(HCAD_VERSION); -static int ehca_open_aqp1 = 0; +static bool ehca_open_aqp1 = 0; static int ehca_hw_level = 0; -static int ehca_poll_all_eqs = 1; +static bool ehca_poll_all_eqs = 1; int ehca_debug_level = 0; int ehca_nr_ports = -1; -int ehca_use_hp_mr = 0; +bool ehca_use_hp_mr = 0; int ehca_port_act_time = 30; int ehca_static_rate = -1; -int ehca_scaling_code = 0; +bool ehca_scaling_code = 0; int ehca_lock_hcalls = -1; int ehca_max_cq = -1; int ehca_max_qp = -1; diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 5965b3df8f2..7013da5e9ed 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -96,7 +96,7 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); -static unsigned int limit_maxrdreqsz; +static bool limit_maxrdreqsz; module_param(limit_maxrdreqsz, bool, 0644); MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 32bbd4c77b7..fd7a0d5bc94 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -98,15 +98,15 @@ #define XTYPE_XBOX360W 2 #define XTYPE_UNKNOWN 3 -static int dpad_to_buttons; +static bool dpad_to_buttons; module_param(dpad_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); -static int triggers_to_buttons; +static bool triggers_to_buttons; module_param(triggers_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads"); -static int sticks_to_null; +static bool sticks_to_null; module_param(sticks_to_null, bool, S_IRUGO); MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads"); diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 52b41934898..e2bdfd4bea7 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -48,7 +48,7 @@ MODULE_DESCRIPTION("Wistron laptop button driver"); MODULE_LICENSE("GPL v2"); MODULE_VERSION("0.3"); -static int force; /* = 0; */ +static bool force; /* = 0; */ module_param(force, bool, 0); MODULE_PARM_DESC(force, "Load even if computer is not in database"); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index de7e8bc17b1..e6c9931f02c 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -60,7 +60,7 @@ static unsigned int psmouse_rate = 100; module_param_named(rate, psmouse_rate, uint, 0644); MODULE_PARM_DESC(rate, "Report rate, in reports per second."); -static unsigned int psmouse_smartscroll = 1; +static bool psmouse_smartscroll = 1; module_param_named(smartscroll, psmouse_smartscroll, bool, 0644); MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index 4b755cb5b38..1c58aafa523 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -185,17 +185,17 @@ #define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4) /* Control touchpad's No Deceleration option */ -static int no_decel = 1; +static bool no_decel = 1; module_param(no_decel, bool, 0644); MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)"); /* Control touchpad's Reduced Reporting option */ -static int reduce_report; +static bool reduce_report; module_param(reduce_report, bool, 0644); MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)"); /* Control touchpad's No Filter option */ -static int no_filter; +static bool no_filter; module_param(no_filter, bool, 0644); MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)"); diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index 979c443bf1e..be3316073ae 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -105,7 +105,7 @@ EXPORT_SYMBOL(__hp_sdc_enqueue_transaction); EXPORT_SYMBOL(hp_sdc_enqueue_transaction); EXPORT_SYMBOL(hp_sdc_dequeue_transaction); -static unsigned int hp_sdc_disabled; +static bool hp_sdc_disabled; module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0); MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver."); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 7f8f538a980..1df19bb8534 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -35,11 +35,11 @@ #include #include -static int flip_x; +static bool flip_x; module_param(flip_x, bool, 0644); MODULE_PARM_DESC(flip_x, "flip x coordinate"); -static int flip_y; +static bool flip_y; module_param(flip_y, bool, 0644); MODULE_PARM_DESC(flip_y, "flip y coordinate"); diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c index 81e33862394..d13143b68b3 100644 --- a/drivers/input/touchscreen/htcpen.c +++ b/drivers/input/touchscreen/htcpen.c @@ -40,10 +40,10 @@ MODULE_LICENSE("GPL"); #define X_AXIS_MAX 2040 #define Y_AXIS_MAX 2040 -static int invert_x; +static bool invert_x; module_param(invert_x, bool, 0644); MODULE_PARM_DESC(invert_x, "If set, X axis is inverted"); -static int invert_y; +static bool invert_y; module_param(invert_y, bool, 0644); MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted"); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index d2b57536fee..46e83ad53f4 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -30,7 +30,7 @@ #define UCB1400_TS_POLL_PERIOD 10 /* ms */ -static int adcsync; +static bool adcsync; static int ts_delay = 55; /* us */ static int ts_delay_pressure; /* us */ diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 06cef3ccc63..3a5ebf452e8 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -60,11 +60,11 @@ #define DRIVER_AUTHOR "Daniel Ritz " #define DRIVER_DESC "USB Touchscreen Driver" -static int swap_xy; +static bool swap_xy; module_param(swap_xy, bool, 0644); MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); -static int hwcalib_xy; +static bool hwcalib_xy; module_param(hwcalib_xy, bool, 0644); MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available"); diff --git a/drivers/isdn/hardware/avm/b1dma.c b/drivers/isdn/hardware/avm/b1dma.c index 9c8d7aa053c..a0ed668d4d2 100644 --- a/drivers/isdn/hardware/avm/b1dma.c +++ b/drivers/isdn/hardware/avm/b1dma.c @@ -40,7 +40,7 @@ MODULE_DESCRIPTION("CAPI4Linux: DMA support for active AVM cards"); MODULE_AUTHOR("Carsten Paeth"); MODULE_LICENSE("GPL"); -static int suppress_pollack = 0; +static bool suppress_pollack = 0; module_param(suppress_pollack, bool, 0); /* ------------------------------------------------------------- */ diff --git a/drivers/isdn/hardware/avm/c4.c b/drivers/isdn/hardware/avm/c4.c index d3530f6e811..9743b24ef9d 100644 --- a/drivers/isdn/hardware/avm/c4.c +++ b/drivers/isdn/hardware/avm/c4.c @@ -40,7 +40,7 @@ static char *revision = "$Revision: 1.1.2.2 $"; /* ------------------------------------------------------------- */ -static int suppress_pollack; +static bool suppress_pollack; static struct pci_device_id c4_pci_tbl[] = { { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 }, diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c index ca710ab278e..023de789f25 100644 --- a/drivers/isdn/sc/init.c +++ b/drivers/isdn/sc/init.c @@ -30,7 +30,7 @@ static const char *boardname[] = { "DataCommute/BRI", "DataCommute/PRI", "TeleCo static unsigned int io[] = {0,0,0,0}; static unsigned char irq[] = {0,0,0,0}; static unsigned long ram[] = {0,0,0,0}; -static int do_reset = 0; +static bool do_reset = 0; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index a498135a4e8..1ed1677c916 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -18,7 +18,7 @@ MODULE_AUTHOR("Márton Németh "); MODULE_DESCRIPTION("Clevo mail LED driver"); MODULE_LICENSE("GPL"); -static unsigned int __initdata nodetect; +static bool __initdata nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index 614ebebaaa2..57371e1485a 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -79,7 +79,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id) return 1; } -static unsigned int __initdata nodetect; +static bool __initdata nodetect; module_param_named(nodetect, nodetect, bool, 0); MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection"); diff --git a/drivers/macintosh/ams/ams-core.c b/drivers/macintosh/ams/ams-core.c index 399beb1638d..5c6a2d87656 100644 --- a/drivers/macintosh/ams/ams-core.c +++ b/drivers/macintosh/ams/ams-core.c @@ -31,7 +31,7 @@ /* There is only one motion sensor per machine */ struct ams ams_info; -static unsigned int verbose; +static bool verbose; module_param(verbose, bool, 0644); MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output"); diff --git a/drivers/macintosh/ams/ams-input.c b/drivers/macintosh/ams/ams-input.c index 8a712392cd3..b27e530a87a 100644 --- a/drivers/macintosh/ams/ams-input.c +++ b/drivers/macintosh/ams/ams-input.c @@ -19,11 +19,11 @@ #include "ams.h" -static unsigned int joystick; +static bool joystick; module_param(joystick, bool, S_IRUGO); MODULE_PARM_DESC(joystick, "Enable the input class device on module load"); -static unsigned int invert; +static bool invert; module_param(invert, bool, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(invert, "Invert input data on X and Y axis"); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 02367308ff2..c60d025044e 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -52,7 +52,7 @@ static const char *sensor_location[3]; static int limit_adjust; static int fan_speed = -1; -static int verbose; +static bool verbose; MODULE_AUTHOR("Colin Leroy "); MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index bd51a764351..4fc024d7704 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -30,7 +30,7 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." DVB_USB_DEBUG_STATUS); /* enable obnoxious led */ -int dvb_usb_af9005_led = 1; +bool dvb_usb_af9005_led = 1; module_param_named(led, dvb_usb_af9005_led, bool, 0644); MODULE_PARM_DESC(led, "enable led (default: 1)."); diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h index c71c77bd7f4..6a2bf3de845 100644 --- a/drivers/media/dvb/dvb-usb/af9005.h +++ b/drivers/media/dvb/dvb-usb/af9005.h @@ -35,7 +35,7 @@ extern int dvb_usb_af9005_debug; #define deb_i2c(args...) dprintk(dvb_usb_af9005_debug,0x10,args) #define deb_fw(args...) dprintk(dvb_usb_af9005_debug,0x20,args) -extern int dvb_usb_af9005_led; +extern bool dvb_usb_af9005_led; /* firmware */ #define FW_BULKOUT_SIZE 250 diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index edadc8449a3..36ce0611c03 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -47,11 +47,11 @@ MODULE_VERSION("0.0.4"); #endif static int io = CONFIG_RADIO_GEMTEK_PORT; -static int probe = CONFIG_RADIO_GEMTEK_PROBE; -static int hardmute; -static int shutdown = 1; -static int keepmuted = 1; -static int initmute = 1; +static bool probe = CONFIG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static bool shutdown = 1; +static bool keepmuted = 1; +static bool initmute = 1; static int radio_nr = -1; module_param(io, int, 0444); diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c index 3fb76e3834c..87c1ee13b05 100644 --- a/drivers/media/radio/radio-miropcm20.c +++ b/drivers/media/radio/radio-miropcm20.c @@ -23,7 +23,7 @@ static int radio_nr = -1; module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)"); -static int mono; +static bool mono; module_param(mono, bool, 0); MODULE_PARM_DESC(mono, "Force tuner into mono mode."); diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index 27997a9ceb0..ca12d3289bf 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -38,7 +38,7 @@ #include #include -static int debug; +static bool debug; #define IRCTL_DEV_NAME "BaseRemoteCtl" #define NOPLUG -1 diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 20bb12d6fbb..21105bf9594 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -156,9 +156,9 @@ /* module parameters */ #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define mce_dbg(dev, fmt, ...) \ diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c index b1d29d09eea..d6f4bfe0939 100644 --- a/drivers/media/rc/streamzap.c +++ b/drivers/media/rc/streamzap.c @@ -43,9 +43,9 @@ #define DRIVER_DESC "Streamzap Remote Control driver" #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define USB_STREAMZAP_VENDOR_ID 0x0e9c diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index e7f7a57bf68..b09c5fae489 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -226,11 +226,11 @@ module_param(protocol, uint, 0444); MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command " "(0 = RC5, 1 = NEC, 2 = RC6A, default)"); -static int invert; /* default = 0 */ +static bool invert; /* default = 0 */ module_param(invert, bool, 0444); MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver"); -static int txandrx; /* default = 0 */ +static bool txandrx; /* default = 0 */ module_param(txandrx, bool, 0444); MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX"); diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index cd8ff047318..fda32f52554 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -72,7 +72,7 @@ struct qcam { static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 }; static int probe = 2; -static int force_rgb; +static bool force_rgb; static int video_nr = -1; /* FIXME: parport=auto would never have worked, surely? --RR */ diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 5909f2557ab..1d64af9adf7 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -31,7 +31,7 @@ MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); MODULE_AUTHOR("Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index d93e5ab45fd..51c5b9ad67d 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -35,7 +35,7 @@ MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); MODULE_AUTHOR("Martin Vaughan"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index c6ff32a6137..349bd9c2aff 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -75,7 +75,7 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; static unsigned cardtype_c = 1; static unsigned tuner_c = 1; -static unsigned radio_c = 1; +static bool radio_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; diff --git a/drivers/media/video/cx25821/cx25821-alsa.c b/drivers/media/video/cx25821/cx25821-alsa.c index 09e99de5fd2..58be4f3bb3c 100644 --- a/drivers/media/video/cx25821/cx25821-alsa.c +++ b/drivers/media/video/cx25821/cx25821-alsa.c @@ -102,7 +102,7 @@ struct cx25821_audio_dev { static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 }; +static bool enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 }; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable cx25821 soundcard. default enabled."); diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 68d1240f493..04bf6627d36 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -96,7 +96,7 @@ typedef struct cx88_audio_dev snd_cx88_card_t; static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ -static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; +static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled."); diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 9fe3816b2aa..0c449367543 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -27,8 +27,8 @@ /* Kernel module parameters */ int force_sensor; -static int dump_bridge; -int dump_sensor; +static bool dump_bridge; +bool dump_sensor; static const struct usb_device_id m5602_table[] = { {USB_DEVICE(0x0402, 0x5602)}, diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h index b1f0c492036..8c672b5c8c6 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.h +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -106,7 +106,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int mt9m111_probe(struct sd *sd); int mt9m111_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_ov7660.h b/drivers/media/video/gspca/m5602/m5602_ov7660.h index 2efd607987e..2b6a13b508f 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov7660.h +++ b/drivers/media/video/gspca/m5602/m5602_ov7660.h @@ -86,7 +86,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int ov7660_probe(struct sd *sd); int ov7660_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h index da9a129b739..f7aa5bf6898 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -135,7 +135,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int ov9650_probe(struct sd *sd); int ov9650_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h index 33835959639..81a2bcb88fe 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.h +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -147,7 +147,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int po1030_probe(struct sd *sd); int po1030_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h index 8cc7a3f6da7..8e0035e731c 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -65,7 +65,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int s5k4aa_probe(struct sd *sd); int s5k4aa_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h index 80a63a236e2..79952247b53 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -41,7 +41,7 @@ /* Kernel module parameters */ extern int force_sensor; -extern int dump_sensor; +extern bool dump_sensor; int s5k83a_probe(struct sd *sd); int s5k83a_init(struct sd *sd); diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 0ab425fbea9..6f878f6c6e9 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -36,8 +36,8 @@ MODULE_AUTHOR("Erik Andrén"); MODULE_DESCRIPTION("STV06XX USB Camera Driver"); MODULE_LICENSE("GPL"); -static int dump_bridge; -static int dump_sensor; +static bool dump_bridge; +static bool dump_sensor; int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data) { diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 3f1a5b1beeb..e5eb56a5b61 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -49,7 +49,7 @@ module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / " "1=RCA front / 2=S/PDIF"); -static int boost_audio; +static bool boost_audio; module_param(boost_audio, bool, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(boost_audio, "boost the audio signal"); diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 41108a9a195..544af91cbdc 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -99,7 +99,7 @@ static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, static unsigned int cardtype_c = 1; static unsigned int tuner_c = 1; -static unsigned int radio_c = 1; +static bool radio_c = 1; static unsigned int i2c_clock_period_c = 1; static char pal[] = "---"; static char secam[] = "--"; diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 6b7c9c82333..d0fbfcf7133 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -58,7 +58,7 @@ /* card parameters */ static int ivtvfb_card_id = -1; static int ivtvfb_debug = 0; -static int osd_laced; +static bool osd_laced; static int osd_depth; static int osd_upper; static int osd_left; diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c index 80ec64d2d6d..2c8fc0f6d69 100644 --- a/drivers/media/video/marvell-ccic/mcam-core.c +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -51,7 +51,7 @@ static int delivered; * sense. */ -static int alloc_bufs_at_read; +static bool alloc_bufs_at_read; module_param(alloc_bufs_at_read, bool, 0444); MODULE_PARM_DESC(alloc_bufs_at_read, "Non-zero value causes DMA buffers to be allocated when the " @@ -73,11 +73,11 @@ MODULE_PARM_DESC(dma_buf_size, "parameters require larger buffers, an attempt to reallocate " "will be made."); #else /* MCAM_MODE_VMALLOC */ -static const int alloc_bufs_at_read = 0; +static const bool alloc_bufs_at_read = 0; static const int n_dma_bufs = 3; /* Used by S/G_PARM */ #endif /* MCAM_MODE_VMALLOC */ -static int flip; +static bool flip; module_param(flip, bool, 0444); MODULE_PARM_DESC(flip, "If set, the sensor will be instructed to flip the image " diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index d0f53885728..d7cd0f633f6 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -69,12 +69,12 @@ MODULE_LICENSE("GPL"); /* module parameters */ static int opmode = OPMODE_AUTO; int msp_debug; /* msp_debug output */ -int msp_once; /* no continuous stereo monitoring */ -int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), +bool msp_once; /* no continuous stereo monitoring */ +bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), the autoscan seems work well only with FM... */ int msp_standard = 1; /* Override auto detect of audio msp_standard, if needed. */ -int msp_dolby; +bool msp_dolby; int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual (msp34xxg only) 0x00a0-0x03c0 */ diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h index 831e8db4368..fbe5e0715f9 100644 --- a/drivers/media/video/msp3400-driver.h +++ b/drivers/media/video/msp3400-driver.h @@ -44,10 +44,10 @@ /* module parameters */ extern int msp_debug; -extern int msp_once; -extern int msp_amsound; +extern bool msp_once; +extern bool msp_amsound; extern int msp_standard; -extern int msp_dolby; +extern bool msp_dolby; extern int msp_stereo_thresh; struct msp_state { diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index ee0d0b39cd1..0de598bf66b 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -70,9 +70,9 @@ static u32 video1_numbuffers = 3; static u32 video2_numbuffers = 3; static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE; static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE; -static u32 vid1_static_vrfb_alloc; -static u32 vid2_static_vrfb_alloc; -static int debug; +static bool vid1_static_vrfb_alloc; +static bool vid2_static_vrfb_alloc; +static bool debug; /* Module parameters */ module_param(video1_numbuffers, uint, S_IRUGO); diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c index ebebcac4922..4be26abf6ce 100644 --- a/drivers/media/video/omap/omap_vout_vrfb.c +++ b/drivers/media/video/omap/omap_vout_vrfb.c @@ -84,7 +84,7 @@ void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) } int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, - u32 static_vrfb_allocation) + bool static_vrfb_allocation) { int ret = 0, i, j; struct omap_vout_device *vout; diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 8aa05853128..6a564964853 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -25,7 +25,7 @@ MODULE_AUTHOR("Jonathan Corbet "); MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 5cfdbc78b91..0ef5484696b 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -57,7 +57,7 @@ MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " "Hans Verkuil, Mauro Carvalho Chehab"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index b7fb5a5cad7..3c61aec517a 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -38,11 +38,11 @@ #include "stk-webcam.h" -static int hflip = 1; +static bool hflip = 1; module_param(hflip, bool, 0444); MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 1"); -static int vflip = 1; +static bool vflip = 1; module_param(vflip, bool, 0444); MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 1"); diff --git a/drivers/media/video/tm6000/tm6000-alsa.c b/drivers/media/video/tm6000/tm6000-alsa.c index 7d675c72fd4..bb2047c1035 100644 --- a/drivers/media/video/tm6000/tm6000-alsa.c +++ b/drivers/media/video/tm6000/tm6000-alsa.c @@ -42,7 +42,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ -static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; +static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1}; module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled."); diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 926f0393115..dd26cacd055 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -52,7 +52,7 @@ #define LOCK_RETRY_DELAY (200) /* Debug functions */ -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c index 7875e80cb2f..236c559d5f5 100644 --- a/drivers/media/video/tvp7002.c +++ b/drivers/media/video/tvp7002.c @@ -63,7 +63,7 @@ MODULE_LICENSE("GPL"); #define TVP7002_CL_MASK 0x0f /* Debug functions */ -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-2)"); diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 9bbe61700fd..65d065aa609 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -34,7 +34,7 @@ MODULE_DESCRIPTION("uPD64083 driver"); MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug; +static bool debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index cbf13d09b4a..bfae41ba53c 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -34,13 +34,13 @@ MODULE_AUTHOR("Jonathan Corbet "); MODULE_DESCRIPTION("VIA framebuffer-based camera controller driver"); MODULE_LICENSE("GPL"); -static int flip_image; +static bool flip_image; module_param(flip_image, bool, 0444); MODULE_PARM_DESC(flip_image, "If set, the sensor will be instructed to flip the image " "vertically."); -static int override_serial; +static bool override_serial; module_param(override_serial, bool, 0444); MODULE_PARM_DESC(override_serial, "The camera driver will normally refuse to load if " diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index e8a27844bf3..e86173bd132 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -57,7 +57,7 @@ ZR36057_ISR_GIRQ1 | \ ZR36057_ISR_JPEGRepIRQ ) -static int lml33dpath; /* default = 0 +static bool lml33dpath; /* default = 0 * 1 will use digital path in capture * mode instead of analog. It can be * used for picture adjustments using diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 5e4f57cbf31..f08546fe223 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -50,7 +50,7 @@ /* amount of chips attached via this driver */ static int zr36060_codecs; -static int low_bitrate; +static bool low_bitrate; module_param(low_bitrate, bool, 0); MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate"); diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 6ce70e9615d..5319e9b6584 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -21,7 +21,7 @@ #define DRIVER_NAME "jmb38x_ms" -static int no_dma; +static bool no_dma; module_param(no_dma, bool, 0644); enum { diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index 668f5c6a039..29b2172ae18 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -23,7 +23,7 @@ #include #include "r592.h" -static int r592_enable_dma = 1; +static bool r592_enable_dma = 1; static int debug; static const char *tpc_names[] = { diff --git a/drivers/memstick/host/tifm_ms.c b/drivers/memstick/host/tifm_ms.c index b7aacf47703..6902b83eb1b 100644 --- a/drivers/memstick/host/tifm_ms.c +++ b/drivers/memstick/host/tifm_ms.c @@ -22,7 +22,7 @@ #define DRIVER_NAME "tifm_ms" -static int no_dma; +static bool no_dma; module_param(no_dma, bool, 0644); /* diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c index b1f4563be9a..701eb600b12 100644 --- a/drivers/misc/iwmc3200top/main.c +++ b/drivers/misc/iwmc3200top/main.c @@ -376,20 +376,20 @@ static int blocks; module_param(blocks, int, 0604); MODULE_PARM_DESC(blocks, "max_blocks_to_send"); -static int dump; +static bool dump; module_param(dump, bool, 0604); MODULE_PARM_DESC(dump, "dump_hex_content"); -static int jump = 1; +static bool jump = 1; module_param(jump, bool, 0604); -static int direct = 1; +static bool direct = 1; module_param(direct, bool, 0604); -static int checksum = 1; +static bool checksum = 1; module_param(checksum, bool, 0604); -static int fw_download = 1; +static bool fw_download = 1; module_param(fw_download, bool, 0604); static int block_size = IWMC_SDIO_BLK_SIZE; @@ -398,7 +398,7 @@ module_param(block_size, int, 0404); static int download_trans_blks = IWMC_DEFAULT_TR_BLK; module_param(download_trans_blks, int, 0604); -static int rubbish_barker; +static bool rubbish_barker; module_param(rubbish_barker, bool, 0604); #ifdef CONFIG_IWMC3200TOP_DEBUG diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 950b97d7412..75d7d7e1736 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -48,7 +48,7 @@ static struct workqueue_struct *workqueue; * performance cost, and for other reasons may not always be desired. * So we allow it it to be disabled. */ -int use_spi_crc = 1; +bool use_spi_crc = 1; module_param(use_spi_crc, bool, 0); /* @@ -58,9 +58,9 @@ module_param(use_spi_crc, bool, 0); * overridden if necessary. */ #ifdef CONFIG_MMC_UNSAFE_RESUME -int mmc_assume_removable; +bool mmc_assume_removable; #else -int mmc_assume_removable = 1; +bool mmc_assume_removable = 1; #endif EXPORT_SYMBOL(mmc_assume_removable); module_param_named(removable, mmc_assume_removable, bool, 0644); diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 14664f1fb16..afa6bd2b7b7 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -64,7 +64,7 @@ int mmc_attach_sd(struct mmc_host *host); int mmc_attach_sdio(struct mmc_host *host); /* Module parameters */ -extern int use_spi_crc; +extern bool use_spi_crc; /* Debugfs information for hosts and cards */ void mmc_add_host_debugfs(struct mmc_host *host); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index f70d04664ca..69d249f51d6 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -22,8 +22,8 @@ #define DRIVER_NAME "tifm_sd" #define DRIVER_VERSION "0.8" -static int no_dma = 0; -static int fixed_timeout = 0; +static bool no_dma = 0; +static bool fixed_timeout = 0; module_param(no_dma, bool, 0644); module_param(fixed_timeout, bool, 0644); diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index 2ec978bc32b..3135a1a5d75 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -223,25 +223,25 @@ enum SD_RESPONSE_TYPE { #define FUN(c) (0x000007 & (c->arg>>28)) #define REG(c) (0x01FFFF & (c->arg>>9)) -static int limit_speed_to_24_MHz; +static bool limit_speed_to_24_MHz; module_param(limit_speed_to_24_MHz, bool, 0644); MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz"); -static int pad_input_to_usb_pkt; +static bool pad_input_to_usb_pkt; module_param(pad_input_to_usb_pkt, bool, 0644); MODULE_PARM_DESC(pad_input_to_usb_pkt, "Pad USB data input transfers to whole USB Packet"); -static int disable_offload_processing; +static bool disable_offload_processing; module_param(disable_offload_processing, bool, 0644); MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing"); -static int force_1_bit_data_xfers; +static bool force_1_bit_data_xfers; module_param(force_1_bit_data_xfers, bool, 0644); MODULE_PARM_DESC(force_1_bit_data_xfers, "Force SDIO Data Transfers to 1-bit Mode"); -static int force_polling_for_irqs; +static bool force_polling_for_irqs; module_param(force_polling_for_irqs, bool, 0644); MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts"); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 8544d6bf50a..5c3d719c37e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -185,7 +185,7 @@ struct pxa3xx_nand_info { uint32_t ndcb2; }; -static int use_dma = 1; +static bool use_dma = 1; module_param(use_dma, bool, 0444); MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index f20f393bfda..769a4e096b3 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -22,7 +22,7 @@ #include "r852.h" -static int r852_enable_dma = 1; +static bool r852_enable_dma = 1; module_param(r852_enable_dma, bool, S_IRUGO); MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)"); diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c index 0dc34f12f92..d4716273651 100644 --- a/drivers/parport/parport_ip32.c +++ b/drivers/parport/parport_ip32.c @@ -135,7 +135,7 @@ #define PARPORT_IP32_ENABLE_EPP (1U << 3) #define PARPORT_IP32_ENABLE_ECP (1U << 4) static unsigned int features = ~0U; -static int verbose_probing = DEFAULT_VERBOSE_PROBING; +static bool verbose_probing = DEFAULT_VERBOSE_PROBING; /* We do not support more than one port. */ static struct parport *this_port = NULL; diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 095f29e1373..2a47e82821d 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -44,7 +44,7 @@ #define METHOD_NAME__SUN "_SUN" #define METHOD_NAME_OSHP "OSHP" -static int debug_acpi; +static bool debug_acpi; static acpi_status decode_type0_hpx_record(union acpi_object *record, struct hotplug_params *hpx) diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index efa9f2de51c..aa41631e9e0 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -47,7 +47,7 @@ /* name size which is used for entries in pcihpfs */ #define SLOT_NAME_SIZE 21 /* {_SUN} */ -static int debug; +static bool debug; int acpiphp_debug; /* local variables */ diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index e525263210e..c35e8ad6db0 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -43,7 +43,7 @@ #define DRIVER_AUTHOR "Irene Zubarev , Vernon Mauery " #define DRIVER_DESC "ACPI Hot Plug PCI Controller Driver IBM extension" -static int debug; +static bool debug; MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index 41f6a8d79c8..6bf8d2ab164 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -57,8 +57,8 @@ #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static int debug; -static int poll; +static bool debug; +static bool poll; static struct cpci_hp_controller_ops zt5550_hpc_ops; static struct cpci_hp_controller zt5550_hpc; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index f1ce99cceac..187a199da93 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -57,8 +57,8 @@ struct irq_routing_table *cpqhp_routing_table; static void __iomem *smbios_table; static void __iomem *smbios_start; static void __iomem *cpqhp_rom_start; -static int power_mode; -static int debug; +static bool power_mode; +static bool debug; static int initialized; #define DRIVER_VERSION "0.9.8" diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index d934dd4fa87..5506e0e8fbc 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -49,7 +49,7 @@ int ibmphp_debug; -static int debug; +static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC (debug, "Debugging mode enabled or not"); MODULE_LICENSE ("GPL"); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 6d2eea93298..202f4a969eb 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -51,7 +51,7 @@ /* local variables */ -static int debug; +static bool debug; #define DRIVER_VERSION "0.5" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Scott Murray " diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 9a33fdde2d1..4b7cce1de6e 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -40,10 +40,10 @@ #define MY_NAME "pciehp" -extern int pciehp_poll_mode; +extern bool pciehp_poll_mode; extern int pciehp_poll_time; -extern int pciehp_debug; -extern int pciehp_force; +extern bool pciehp_debug; +extern bool pciehp_force; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index b8c99d35ac9..365c6b96c64 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -38,10 +38,10 @@ #include /* Global variables */ -int pciehp_debug; -int pciehp_poll_mode; +bool pciehp_debug; +bool pciehp_poll_mode; int pciehp_poll_time; -int pciehp_force; +bool pciehp_force; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" diff --git a/drivers/pci/hotplug/pcihp_skeleton.c b/drivers/pci/hotplug/pcihp_skeleton.c index 5175d9b26f0..b20ceaaa31f 100644 --- a/drivers/pci/hotplug/pcihp_skeleton.c +++ b/drivers/pci/hotplug/pcihp_skeleton.c @@ -59,7 +59,7 @@ static LIST_HEAD(slot_list); #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static int debug; +static bool debug; static int num_slots; #define DRIVER_VERSION "0.3" diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h index 419919a87b0..df5677440a0 100644 --- a/drivers/pci/hotplug/rpaphp.h +++ b/drivers/pci/hotplug/rpaphp.h @@ -46,7 +46,7 @@ #define PRESENT 1 /* Card in slot */ #define MY_NAME "rpaphp" -extern int rpaphp_debug; +extern bool rpaphp_debug; #define dbg(format, arg...) \ do { \ if (rpaphp_debug) \ diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 758adb5f47f..127d6e60018 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -37,7 +37,7 @@ /* and pci_do_scan_bus */ #include "rpaphp.h" -int rpaphp_debug; +bool rpaphp_debug; LIST_HEAD(rpaphp_slot_head); #define DRIVER_VERSION "0.1" diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index e0c90e643b5..ca64932e658 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -43,9 +43,9 @@ #define MY_NAME THIS_MODULE->name #endif -extern int shpchp_poll_mode; +extern bool shpchp_poll_mode; extern int shpchp_poll_time; -extern int shpchp_debug; +extern bool shpchp_debug; extern struct workqueue_struct *shpchp_wq; extern struct workqueue_struct *shpchp_ordered_wq; diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index dd7e0c51a33..7414fd9ad1d 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -36,8 +36,8 @@ #include "shpchp.h" /* Global variables */ -int shpchp_debug; -int shpchp_poll_mode; +bool shpchp_debug; +bool shpchp_poll_mode; int shpchp_poll_time; struct workqueue_struct *shpchp_wq; struct workqueue_struct *shpchp_ordered_wq; diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 95489cd9a55..52229863e9f 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -28,7 +28,7 @@ #include "aerdrv.h" /* Override the existing corrected and uncorrected error masks */ -static int aer_mask_override; +static bool aer_mask_override; module_param(aer_mask_override, bool, 0); struct aer_error_inj { diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 9674e9f30d4..0ca05353814 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -27,8 +27,8 @@ #include #include "aerdrv.h" -static int forceload; -static int nosourceid; +static bool forceload; +static bool nosourceid; module_param(forceload, bool, 0); module_param(nosourceid, bool, 0); diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 9dc565c615b..849c0c11d2a 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -24,15 +24,15 @@ #include "yenta_socket.h" #include "i82365.h" -static int disable_clkrun; +static bool disable_clkrun; module_param(disable_clkrun, bool, 0444); MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option"); -static int isa_probe = 1; +static bool isa_probe = 1; module_param(isa_probe, bool, 0444); MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing"); -static int pwr_irqs_off; +static bool pwr_irqs_off; module_param(pwr_irqs_off, bool, 0644); MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!"); diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 8877b836d27..d9673447832 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -189,7 +189,7 @@ struct compal_data{ /* =============== */ /* General globals */ /* =============== */ -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index 7f88c7923fc..6ee0b5c9093 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -95,7 +95,7 @@ #define OT_EC_BL_CONTROL_ON_DATA 0x1A -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f204643c505..bb5132128b3 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -89,7 +89,7 @@ static int msi_laptop_resume(struct platform_device *device); #define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index 09e26bfd464..fd73ea89b85 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -228,12 +228,12 @@ static struct platform_device *sdev; static struct rfkill *rfk; static bool has_stepping_quirk; -static int force; +static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Disable the DMI check and forces the driver to be loaded"); -static int debug; +static bool debug; module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 62533c105da..ea0c6075b72 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -378,13 +378,13 @@ static unsigned int bright_maxlvl; /* 0 = unknown */ #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES static int dbg_wlswemul; -static int tpacpi_wlsw_emulstate; +static bool tpacpi_wlsw_emulstate; static int dbg_bluetoothemul; -static int tpacpi_bluetooth_emulstate; +static bool tpacpi_bluetooth_emulstate; static int dbg_wwanemul; -static int tpacpi_wwan_emulstate; +static bool tpacpi_wwan_emulstate; static int dbg_uwbemul; -static int tpacpi_uwb_emulstate; +static bool tpacpi_uwb_emulstate; #endif @@ -6444,7 +6444,7 @@ static struct ibm_struct brightness_driver_data = { static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */ static char *alsa_id = "ThinkPadEC"; -static int alsa_enable = SNDRV_DEFAULT_ENABLE1; +static bool alsa_enable = SNDRV_DEFAULT_ENABLE1; struct tpacpi_alsa_data { struct snd_card *card; @@ -6487,7 +6487,7 @@ static enum tpacpi_volume_access_mode volume_mode = TPACPI_VOL_MODE_MAX; static enum tpacpi_volume_capabilities volume_capabilities; -static int volume_control_allowed; +static bool volume_control_allowed; /* * Used to syncronize writers to TP_EC_AUDIO and @@ -7265,7 +7265,7 @@ enum fan_control_commands { * and also watchdog cmd */ }; -static int fan_control_allowed; +static bool fan_control_allowed; static enum fan_status_access_mode fan_status_access_mode; static enum fan_control_access_mode fan_control_access_mode; @@ -8437,7 +8437,7 @@ static struct proc_dir_entry *proc_dir; * Module and infrastructure proble, init and exit handling */ -static int force_load; +static bool force_load; #ifdef CONFIG_THINKPAD_ACPI_DEBUG static const char * __init str_supported(int is_supported) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index a134c26870b..42a4dcc25f9 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -82,12 +82,12 @@ struct wmi_block { #define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */ #define ACPI_WMI_EVENT 0x8 /* GUID is an event */ -static int debug_event; +static bool debug_event; module_param(debug_event, bool, 0444); MODULE_PARM_DESC(debug_event, "Log WMI Events [0/1]"); -static int debug_dump_wdg; +static bool debug_dump_wdg; module_param(debug_dump_wdg, bool, 0444); MODULE_PARM_DESC(debug_dump_wdg, "Dump available WMI interfaces [0/1]"); diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 545874b1df9..076e211a40b 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -64,7 +64,7 @@ static unsigned int cache_time = 1000; module_param(cache_time, uint, 0644); MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); -static unsigned int pmod_enabled; +static bool pmod_enabled; module_param(pmod_enabled, bool, 0644); MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit"); diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index e5cb9248a44..f3b8bb84faf 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -75,7 +75,7 @@ static LIST_HEAD(raw3270_devices); static int raw3270_registered; /* Module parameters */ -static int tubxcorrect = 0; +static bool tubxcorrect = 0; module_param(tubxcorrect, bool, 0); /* diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c index 11312f401c7..2211277a107 100644 --- a/drivers/s390/char/vmwatchdog.c +++ b/drivers/s390/char/vmwatchdog.c @@ -28,9 +28,9 @@ #define MAX_CMDLEN 240 #define MIN_INTERVAL 15 static char vmwdt_cmd[MAX_CMDLEN] = "IPL"; -static int vmwdt_conceal; +static bool vmwdt_conceal; -static int vmwdt_nowayout = WATCHDOG_NOWAYOUT; +static bool vmwdt_nowayout = WATCHDOG_NOWAYOUT; MODULE_LICENSE("GPL"); MODULE_AUTHOR("Arnd Bergmann "); diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 195823a51aa..ed119cedaae 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -102,7 +102,7 @@ static int setup_dmaspeed[MAXBOARDS] __initdata = { -1, -1, -1, -1 }; */ #if defined(MODULE) -static int isapnp = 0; +static bool isapnp = 0; static int aha1542[] = {0x330, 11, 4, -1}; module_param_array(aha1542, int, NULL, 0); module_param(isapnp, bool, 0); diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index f5b718d3c31..13aeca3d51f 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -546,7 +546,7 @@ static struct ParameterData __devinitdata cfg_data[] = { * command line overrides will be used. If set to 1 then safe and * slow settings will be used. */ -static int use_safe_settings = 0; +static bool use_safe_settings = 0; module_param_named(safe, use_safe_settings, bool, 0); MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false"); diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c index f6a50c98c36..002924963cd 100644 --- a/drivers/scsi/nsp32.c +++ b/drivers/scsi/nsp32.c @@ -59,11 +59,11 @@ MODULE_PARM_DESC(trans_mode, "transfer mode (0: BIOS(default) 1: Async 2: Ultra2 #define ASYNC_MODE 1 #define ULTRA20M_MODE 2 -static int auto_param = 0; /* default: ON */ +static bool auto_param = 0; /* default: ON */ module_param (auto_param, bool, 0); MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)"); -static int disc_priv = 1; /* default: OFF */ +static bool disc_priv = 1; /* default: OFF */ module_param (disc_priv, bool, 0); MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))"); diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index ca86721a71b..b61a753eb89 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -70,7 +70,7 @@ module_param(nsp_burst_mode, int, 0); MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))"); /* Release IO ports after configuration? */ -static int free_ports = 0; +static bool free_ports = 0; module_param(free_ports, bool, 0); MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))"); diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c index 0d18d80bcd2..9bcf87ae4c0 100644 --- a/drivers/staging/comedi/comedi_fops.c +++ b/drivers/staging/comedi/comedi_fops.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL(comedi_debug); module_param(comedi_debug, int, 0644); #endif -int comedi_autoconfig = 1; +bool comedi_autoconfig = 1; module_param(comedi_autoconfig, bool, 0444); static int comedi_num_legacy_minors; diff --git a/drivers/staging/comedi/comedi_fops.h b/drivers/staging/comedi/comedi_fops.h index da4b4f5553f..006cf14c577 100644 --- a/drivers/staging/comedi/comedi_fops.h +++ b/drivers/staging/comedi/comedi_fops.h @@ -1,10 +1,11 @@ #ifndef _COMEDI_FOPS_H #define _COMEDI_FOPS_H +#include extern struct class *comedi_class; extern const struct file_operations comedi_fops; -extern int comedi_autoconfig; +extern bool comedi_autoconfig; extern struct comedi_driver *comedi_drivers; #endif /* _COMEDI_FOPS_H */ diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c index deac938d850..d071c838ac2 100644 --- a/drivers/staging/media/go7007/snd-go7007.c +++ b/drivers/staging/media/go7007/snd-go7007.c @@ -38,7 +38,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; -static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; module_param_array(index, int, NULL, 0444); module_param_array(id, charp, NULL, 0444); diff --git a/drivers/staging/media/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c index c5a0d27a02d..4d20e9f7411 100644 --- a/drivers/staging/media/lirc/lirc_bt829.c +++ b/drivers/staging/media/lirc/lirc_bt829.c @@ -53,7 +53,7 @@ static unsigned char do_get_bits(void); #define DRIVER_NAME "lirc_bt829" -static int debug; +static bool debug; #define dprintk(fmt, args...) \ do { \ if (debug) \ diff --git a/drivers/staging/media/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c index 6cd4cd67a1d..7a250177667 100644 --- a/drivers/staging/media/lirc/lirc_igorplugusb.c +++ b/drivers/staging/media/lirc/lirc_igorplugusb.c @@ -62,9 +62,9 @@ /* debugging support */ #ifdef CONFIG_USB_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif #define dprintk(fmt, args...) \ diff --git a/drivers/staging/media/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c index 02b07a6c177..dd2bca7b56f 100644 --- a/drivers/staging/media/lirc/lirc_parallel.c +++ b/drivers/staging/media/lirc/lirc_parallel.c @@ -63,8 +63,8 @@ /*** Global Variables ***/ -static int debug; -static int check_pselecd; +static bool debug; +static bool check_pselecd; unsigned int irq = LIRC_IRQ; unsigned int io = LIRC_PORT; diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c index 8a060a8a722..2aac67c9828 100644 --- a/drivers/staging/media/lirc/lirc_serial.c +++ b/drivers/staging/media/lirc/lirc_serial.c @@ -107,13 +107,13 @@ struct lirc_serial { static int type; static int io; static int irq; -static int iommap; +static bool iommap; static int ioshift; -static int softcarrier = 1; -static int share_irq; -static int debug; +static bool softcarrier = 1; +static bool share_irq; +static bool debug; static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */ -static int txsense; /* 0 = active high, 1 = active low */ +static bool txsense; /* 0 = active high, 1 = active low */ #define dprintk(fmt, args...) \ do { \ diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c index 6903d3992ec..c94382b917a 100644 --- a/drivers/staging/media/lirc/lirc_sir.c +++ b/drivers/staging/media/lirc/lirc_sir.c @@ -173,7 +173,7 @@ static DEFINE_SPINLOCK(hardware_lock); static int rx_buf[RBUF_LEN]; static unsigned int rx_tail, rx_head; -static int debug; +static bool debug; #define dprintk(fmt, args...) \ do { \ if (debug) \ diff --git a/drivers/staging/media/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c index 0302d82a12f..76ea4a8f2c7 100644 --- a/drivers/staging/media/lirc/lirc_zilog.c +++ b/drivers/staging/media/lirc/lirc_zilog.c @@ -155,8 +155,8 @@ static struct mutex tx_data_lock; #define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args) /* module parameters */ -static int debug; /* debug output */ -static int tx_only; /* only handle the IR Tx function */ +static bool debug; /* debug output */ +static bool tx_only; /* only handle the IR Tx function */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c index 02fafecd477..897a3a99c79 100644 --- a/drivers/staging/quatech_usb2/quatech_usb2.c +++ b/drivers/staging/quatech_usb2/quatech_usb2.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v2.00" diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c index c44e41af288..1c5780f1571 100644 --- a/drivers/staging/serqt_usb2/serqt_usb2.c +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v2.14" diff --git a/drivers/staging/speakup/speakup.h b/drivers/staging/speakup/speakup.h index 412b87947f6..e66579e6147 100644 --- a/drivers/staging/speakup/speakup.h +++ b/drivers/staging/speakup/speakup.h @@ -116,7 +116,7 @@ extern int bleep_time, bell_pos; extern int spell_delay, key_echo; extern short punc_mask; extern short pitch_shift, synth_flags; -extern int quiet_boot; +extern bool quiet_boot; extern char *synth_name; extern struct bleep unprocessed_sound; diff --git a/drivers/staging/speakup/synth.c b/drivers/staging/speakup/synth.c index c241074a4b5..2222d6919ef 100644 --- a/drivers/staging/speakup/synth.c +++ b/drivers/staging/speakup/synth.c @@ -22,7 +22,7 @@ static struct spk_synth *synths[MAXSYNTHS]; struct spk_synth *synth; char pitch_buff[32] = ""; static int module_status; -int quiet_boot; +bool quiet_boot; struct speakup_info_t speakup_info = { .spinlock = __SPIN_LOCK_UNLOCKED(speakup_info.spinlock), diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c index 08a449b4abf..f50582169b2 100644 --- a/drivers/staging/vme/bridges/vme_tsi148.c +++ b/drivers/staging/vme/bridges/vme_tsi148.c @@ -41,7 +41,7 @@ static void __exit tsi148_exit(void); /* Module parameter */ -static int err_chk; +static bool err_chk; static int geoid; static const char driver_name[] = "vme_tsi148"; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 6a1241c7f84..de88aa5566e 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -118,7 +118,7 @@ static unsigned long board2; static unsigned long board3; static unsigned long board4; static unsigned long controller; -static int support_low_speed; +static bool support_low_speed; static unsigned long modem1; static unsigned long modem2; static unsigned long modem3; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index e67fb20490d..ff8017f8791 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -850,7 +850,7 @@ static int mgsl_device_count; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load; +static bool break_on_load; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 0f6b796c95c..a7efe538df0 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -456,7 +456,7 @@ static int synclinkmp_device_count = 0; * .text section address and breakpoint on module load. * This is useful for use with gdb and add-symbol-file command. */ -static int break_on_load = 0; +static bool break_on_load = 0; /* * Driver major number, defaults to zero to get auto diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index b42092e1f16..98dd9e49b68 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -73,9 +73,9 @@ static const char speedtch_driver_name[] = "speedtch"; #define DEFAULT_SW_BUFFERING 0 static unsigned int altsetting = 0; /* zero means: use the default */ -static int dl_512_first = DEFAULT_DL_512_FIRST; -static int enable_isoc = DEFAULT_ENABLE_ISOC; -static int sw_buffering = DEFAULT_SW_BUFFERING; +static bool dl_512_first = DEFAULT_DL_512_FIRST; +static bool enable_isoc = DEFAULT_ENABLE_ISOC; +static bool sw_buffering = DEFAULT_SW_BUFFERING; #define DEFAULT_B_MAX_DSL 8128 #define DEFAULT_MODEM_MODE 11 diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 00f171a7a8a..01ea5d7421d 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -542,7 +542,7 @@ static int modem_index; static unsigned int debug; static unsigned int altsetting[NB_MODEM] = { [0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF}; -static int sync_wait[NB_MODEM]; +static bool sync_wait[NB_MODEM]; static char *cmv_file[NB_MODEM]; static int annex[NB_MODEM]; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3af5e2dd1d8..8df4b76465a 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -93,7 +93,7 @@ struct async { u8 bulk_status; }; -static int usbfs_snoop; +static bool usbfs_snoop; module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79d339e2e70..a0613d8f9be 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -102,7 +102,7 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); static struct task_struct *khubd_task; /* cycle leds on hubs that aren't blinking for attention */ -static int blinkenlights = 0; +static bool blinkenlights = 0; module_param (blinkenlights, bool, S_IRUGO); MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs"); @@ -131,12 +131,12 @@ MODULE_PARM_DESC(initial_descriptor_timeout, * otherwise the new scheme is used. If that fails and "use_both_schemes" * is set, then the driver will make another attempt, using the other scheme. */ -static int old_scheme_first = 0; +static bool old_scheme_first = 0; module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(old_scheme_first, "start with the old device initialization scheme"); -static int use_both_schemes = 1; +static bool use_both_schemes = 1; module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(use_both_schemes, "try the other device initialization scheme if the " @@ -2026,7 +2026,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) #define SET_ADDRESS_TRIES 2 #define GET_DESCRIPTOR_TRIES 2 #define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first) +#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) #define HUB_ROOT_RESET_TIME 50 /* times are in msec */ #define HUB_SHORT_RESET_TIME 10 diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 1382c90d083..8ca9f994a28 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -47,7 +47,7 @@ const char *usbcore_name = "usbcore"; -static int nousb; /* Disable USB when built into kernel image */ +static bool nousb; /* Disable USB when built into kernel image */ #ifdef CONFIG_USB_SUSPEND static int usb_autosuspend_delay = 2; /* Default delay value, diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index e9a2c5c4445..c16ff55a74e 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -152,15 +152,15 @@ static const char *ep_string[] = { }; /* DMA usage flag */ -static int use_dma = 1; +static bool use_dma = 1; /* packet per buffer dma */ -static int use_dma_ppb = 1; +static bool use_dma_ppb = 1; /* with per descr. update */ -static int use_dma_ppb_du; +static bool use_dma_ppb_du; /* buffer fill mode */ static int use_dma_bufferfill_mode; /* full speed only mode */ -static int use_fullspeed; +static bool use_fullspeed; /* tx buffer size for high speed */ static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 0cd764d5935..a28f6ffcd0f 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -250,9 +250,9 @@ static struct usb_configuration rndis_config_driver = { /*-------------------------------------------------------------------------*/ #ifdef CONFIG_USB_ETH_EEM -static int use_eem = 1; +static bool use_eem = 1; #else -static int use_eem; +static bool use_eem; #endif module_param(use_eem, bool, 0); MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index e0f30fc70e4..47766f0e7ca 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -303,16 +303,16 @@ MODULE_LICENSE("Dual BSD/GPL"); static struct { char *file[FSG_MAX_LUNS]; char *serial; - int ro[FSG_MAX_LUNS]; - int nofua[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; unsigned int num_filenames; unsigned int num_ros; unsigned int num_nofuas; unsigned int nluns; - int removable; - int can_stall; - int cdrom; + bool removable; + bool can_stall; + bool cdrom; char *transport_parm; char *protocol_parm; diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 4c81d540bc2..7322d293213 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -69,7 +69,7 @@ static const char * const ep_name[] = { * * If use_dma is disabled, pio will be used instead. */ -static int use_dma = 0; +static bool use_dma = 0; module_param(use_dma, bool, 0644); /* diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index cf1f36454d0..cdedd133674 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -90,8 +90,8 @@ static const char *const ep_name [] = { * Some gadget drivers work better with the dma support here than others. * These two parameters let you use PIO or more aggressive DMA. */ -static int use_dma = 1; -static int use_dma_chaining = 0; +static bool use_dma = 1; +static bool use_dma_chaining = 0; /* "modprobe net2280 use_dma=n" etc */ module_param (use_dma, bool, S_IRUGO); @@ -112,7 +112,7 @@ module_param (fifo_mode, ushort, 0644); * USB suspend requests will be ignored. This is acceptable for * self-powered devices */ -static int enable_suspend = 0; +static bool enable_suspend = 0; /* "modprobe net2280 enable_suspend=1" etc */ module_param (enable_suspend, bool, S_IRUGO); diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 7db5bbe6251..576cd8578b4 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -98,7 +98,7 @@ module_param (fifo_mode, uint, 0); MODULE_PARM_DESC (fifo_mode, "endpoint configuration"); #ifdef USE_DMA -static unsigned use_dma = 1; +static bool use_dma = 1; /* "modprobe omap_udc use_dma=y", or else as a kernel * boot parameter "omap_udc:use_dma=y" diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index dd2313cce1d..a3fcaae4bc2 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -359,7 +359,7 @@ struct pch_udc_dev { static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ struct pch_udc_dev *pch_udc; /* pointer to device object */ -static int speed_fs; +static bool speed_fs; module_param_named(speed_fs, speed_fs, bool, S_IRUGO); MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index ed1b816e58d..ad9e5b2df64 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -123,11 +123,11 @@ MODULE_AUTHOR("Al Borchers"); MODULE_AUTHOR("David Brownell"); MODULE_LICENSE("GPL"); -static int use_acm = true; +static bool use_acm = true; module_param(use_acm, bool, 0); MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes"); -static int use_obex = false; +static bool use_obex = false; module_param(use_obex, bool, 0); MODULE_PARM_DESC(use_obex, "Use CDC OBEX, default=no"); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 20697cc132d..31d34832907 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -81,7 +81,7 @@ module_param(buflen, uint, 0); * work better with hosts where config changes are problematic or * controllers (like original superh) that only support one config. */ -static int loopdefault = 0; +static bool loopdefault = 0; module_param(loopdefault, bool, S_IRUGO|S_IWUSR); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index e311a511529..a007a9fe0f8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -112,7 +112,7 @@ module_param (park, uint, S_IRUGO); MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); /* for flakey hardware, ignore overcurrent indicators */ -static int ignore_oc = 0; +static bool ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 5f5a6324143..34b9edd8665 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -115,13 +115,13 @@ static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) /* Some boards misreport power switching/overcurrent */ -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param (distrust_firmware, bool, 0); MODULE_PARM_DESC (distrust_firmware, "true to distrust firmware power/overcurrent setup"); /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */ -static int no_handshake = 0; +static bool no_handshake = 0; module_param (no_handshake, bool, 0); MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake"); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 6f62de5c6e3..015c7c62ed4 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -233,7 +233,7 @@ module_param(park, uint, S_IRUGO); MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets"); /* For flakey hardware, ignore overcurrent indicators */ -static int ignore_oc; +static bool ignore_oc; module_param(ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC(ignore_oc, "ignore bogus hardware overcurrent indications"); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 533d12cca37..16dd6a6abf0 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -74,7 +74,7 @@ MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) INT_MODULE_PARM(testing, 0); /* Some boards misreport power switching/overcurrent*/ -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index c8ae199cfbb..6b5eb1017e2 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -59,7 +59,7 @@ #define DRIVER_DESC "USB Universal Host Controller Interface driver" /* for flakey hardware, ignore overcurrent indicators */ -static int ignore_oc; +static bool ignore_oc; module_param(ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications"); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 2dbe600fbc1..a4a3c7cd4a1 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -53,7 +53,7 @@ MODULE_AUTHOR("Tony Olech"); MODULE_DESCRIPTION("FTDI ELAN driver"); MODULE_LICENSE("GPL"); #define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444) -static int distrust_firmware = 1; +static bool distrust_firmware = 1; module_param(distrust_firmware, bool, 0); MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren" "t setup"); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 2453a39b479..4fd0dc835ae 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -62,7 +62,7 @@ MODULE_LICENSE("GPL"); /* Module parameters */ static DEFINE_MUTEX(iowarrior_mutex); -static int debug = 0; +static bool debug = 0; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 53be7aef630..66bc376005d 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -750,7 +750,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) * So this module parameter lets the heuristic be disabled. When using * gadgetfs, the heuristic will probably need to be disabled. */ -static int cppi_rx_rndis = 1; +static bool cppi_rx_rndis = 1; module_param(cppi_rx_rndis, bool, 0); MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index f6ff7923048..56cf0243979 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1586,7 +1586,7 @@ irqreturn_t musb_interrupt(struct musb *musb) EXPORT_SYMBOL_GPL(musb_interrupt); #ifndef CONFIG_MUSB_PIO_ONLY -static int __initdata use_dma = 1; +static bool __initdata use_dma = 1; /* "modprobe ... use_dma=0" etc */ module_param(use_dma, bool, 0); diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index b43d07df4c4..123bf915533 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -52,7 +52,7 @@ #include #include -static int debug; +static bool debug; /* Vendor and Product ID */ #define AIRCABLE_VID 0x16CA diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 18e875b92e0..69328dcfd91 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -37,7 +37,7 @@ #include #include -static int debug; +static bool debug; /* * Version information */ diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index f9f29b289f2..29ffeb6279c 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -37,7 +37,7 @@ #include #include "belkin_sa.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 0e77511060c..5e53cc59e65 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -70,7 +70,7 @@ #define CH341_NBREAK_BITS_REG2 0x40 -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index adfe660ed00..fba1147ed91 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -49,7 +49,7 @@ static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 98bf8334983..6bc3802a581 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -43,7 +43,7 @@ #define CYBERJACK_LOCAL_BUF_SIZE 32 -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 07680d6b792..3bdeafa29c2 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -46,10 +46,10 @@ #include "cypress_m8.h" -static int debug; -static int stats; +static bool debug; +static bool stats; static int interval; -static int unstable_bauds; +static bool unstable_bauds; /* * Version Information diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 6d26a77d0f2..b23bebd721a 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -251,7 +251,7 @@ static int digi_read_oob_callback(struct urb *urb); /* Statics */ -static int debug; +static bool debug; static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 504b5585ea4..aced6817bf9 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -28,7 +28,7 @@ #include #include -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c290df97108..01b6404df39 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -55,7 +55,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Bill Ryder , Kuba Ober , Andreas Mohr, Johan Hovold " #define DRIVER_DESC "USB FTDI Serial Converters Driver" -static int debug; +static bool debug; static __u16 vendor = FTDI_VID; static __u16 product; diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c index e21ce9ddfc6..5d4b099dcf8 100644 --- a/drivers/usb/serial/funsoft.c +++ b/drivers/usb/serial/funsoft.c @@ -16,7 +16,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1404, 0xcddc) }, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index bf12565f8e8..21343378c32 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -42,7 +42,7 @@ static int initial_mode = 1; /* debug flag */ -static int debug; +static bool debug; #define GARMIN_VENDOR_ID 0x091E diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index abd2ee2b2f9..0497575e479 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -191,7 +191,7 @@ static const struct divisor_table_entry divisor_table[] = { }; /* local variables */ -static int debug; +static bool debug; static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e44d375edaa..65bf06aa591 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -210,10 +210,10 @@ static unsigned char OperationalMajorVersion; static unsigned char OperationalMinorVersion; static unsigned short OperationalBuildNumber; -static int debug; +static bool debug; static int closing_wait = EDGE_CLOSING_WAIT; -static int ignore_cpu_rev; +static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ static void edge_tty_recv(struct device *dev, struct tty_struct *tty, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 36f5cbe9048..06053a920dd 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -34,7 +34,7 @@ #define DRIVER_DESC "USB PocketPC PDA driver" static __u16 product, vendor; -static int debug; +static bool debug; static int connect_retries = KP_RETRIES; static int initial_wait; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 5170799d6e9..6f9356f3f99 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -147,7 +147,7 @@ static struct usb_driver usb_ipw_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) { diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 0c537da0d3c..84a396e8367 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman , Johan Hovold " #define DRIVER_DESC "USB IR Dongle driver" -static int debug; +static bool debug; /* if overridden by the user, then use their value for the size of the read and * write urbs */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 64d0ffd4440..3077a443697 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -34,9 +34,9 @@ #ifdef CONFIG_USB_SERIAL_DEBUG -static int debug = 1; +static bool debug = 1; #else -static int debug; +static bool debug; #endif /* @@ -65,7 +65,7 @@ static int clockmode = 1; static int cdmode = 1; static int iuu_cardin; static int iuu_cardout; -static int xmas; +static bool xmas; static int vcc_default = 5; static void read_rxcmd_callback(struct urb *urb); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index bc8dc203e81..4cc36c76180 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -45,7 +45,7 @@ #include #include "keyspan.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a40615674a6..7c62a704830 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -31,7 +31,7 @@ #include #include -static int debug; +static bool debug; /* make a simple define to handle if we are compiling keyspan_pda or xircom support */ #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 19373cb7c5b..fc064e1442c 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -49,7 +49,7 @@ #include #include "kl5kusb105.h" -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index a975bb80303..27fa9c8a77b 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -45,7 +45,7 @@ #define DRIVER_AUTHOR "Wolfgang Grandegger " #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" -static int debug; +static bool debug; /* * Function prototypes diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 19d112f51b9..4554ee49e63 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -71,7 +71,7 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static int debug; +static bool debug; static struct usb_serial_driver moschip7720_2port_driver; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 55cfd6265b9..03b5e249e95 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -263,7 +263,7 @@ struct moschip_port { }; -static int debug; +static bool debug; /* * mos7840_set_reg_sync diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c index 1f00f243c26..b28f1db0195 100644 --- a/drivers/usb/serial/navman.c +++ b/drivers/usb/serial/navman.c @@ -21,7 +21,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 45a8c55881d..8b8d58a2ac1 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -23,7 +23,7 @@ #include #include -static int debug; +static bool debug; /* * Version Information diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 691f57a9d71..262ded9e076 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -32,7 +32,7 @@ * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ #define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x065a, 0x0009) }, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c96b6b6509f..420d9857394 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1234,7 +1234,7 @@ static struct usb_serial_driver option_1port_device = { #endif }; -static int debug; +static bool debug; /* per port private data */ diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 2161d1c3c08..e287fd32682 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -74,7 +74,7 @@ static struct usb_driver oti6858_driver = { .no_dynamic_id = 1, }; -static int debug; +static bool debug; /* requests */ #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 329295615d0..3d8cda57ce7 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -36,7 +36,7 @@ */ #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" -static int debug; +static bool debug; #define PL2303_CLOSING_WAIT (30*HZ) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index aa9367f5b42..1d5deee3be5 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -22,7 +22,7 @@ #define DRIVER_AUTHOR "Qualcomm Inc" #define DRIVER_DESC "Qualcomm USB Serial driver" -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index a36e2313eed..d074b3740dc 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -81,9 +81,9 @@ #define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif -static int debug; -static int safe = 1; -static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; +static bool debug; +static bool safe = 1; +static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold " diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f2485429172..fdae0a4407c 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -46,8 +46,8 @@ allocations > PAGE_SIZE and the number of packets in a page is an integer 512 is the largest possible packet on EHCI */ -static int debug; -static int nmea; +static bool debug; +static bool nmea; /* Used in interface blacklisting */ struct sierra_iface_info { diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 180ea6c7911..d7f5eee18f0 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -33,7 +33,7 @@ #define DRIVER_VERSION "v0.10" #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" -static int debug; +static bool debug; #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 87362e48796..7697858d885 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,7 +46,7 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "v0.1" diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index c70cc012d03..50651cf4fc6 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -20,7 +20,7 @@ #include #include -static int debug; +static bool debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x05e0, 0x0600) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 4af21f46096..8468eb769a2 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -150,7 +150,7 @@ static int ti_download_firmware(struct ti_device *tdev); /* Data */ /* module parameters */ -static int debug; +static bool debug; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index ce6c1a65a54..611b206591c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -61,7 +61,7 @@ static struct usb_driver usb_serial_driver = { drivers depend on it. */ -static int debug; +static bool debug; /* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index d555ca9567b..c88657dd31c 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -37,7 +37,7 @@ #include #include "usb-wwan.h" -static int debug; +static bool debug; void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) { diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1c11959a7d5..210e4b10dc1 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -52,7 +52,7 @@ static int palm_os_4_probe(struct usb_serial *serial, const struct usb_device_id *id); /* Parameters that may be passed into the module. */ -static int debug; +static bool debug; static __u16 vendor; static __u16 product; diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 11af903cb09..7e0acf5c8e3 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -36,7 +36,7 @@ #include #include "whiteheat.h" /* WhiteHEAT specific commands */ -static int debug; +static bool debug; #ifndef CMSPAR #define CMSPAR 0 diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 44bdce4242a..622f12b62a4 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -301,9 +301,9 @@ static struct fb_ops atyfb_ops = { .fb_sync = atyfb_sync, }; -static int noaccel; +static bool noaccel; #ifdef CONFIG_MTRR -static int nomtrr; +static bool nomtrr; #endif static int vram; static int pll; diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 150684882ef..ce1506b75ad 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -263,19 +263,19 @@ static reg_val common_regs[] = { static char *mode_option; static char *monitor_layout; -static int noaccel = 0; +static bool noaccel = 0; static int default_dynclk = -2; -static int nomodeset = 0; -static int ignore_edid = 0; -static int mirror = 0; +static bool nomodeset = 0; +static bool ignore_edid = 0; +static bool mirror = 0; static int panel_yres = 0; -static int force_dfp = 0; -static int force_measure_pll = 0; +static bool force_dfp = 0; +static bool force_measure_pll = 0; #ifdef CONFIG_MTRR -static int nomtrr = 0; +static bool nomtrr = 0; #endif -static int force_sleep; -static int ignore_devlist; +static bool force_sleep; +static bool ignore_devlist; #ifdef CONFIG_PMAC_BACKLIGHT static int backlight = 1; #else diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 6df7c54db0a..6fb499e7678 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -350,7 +350,7 @@ struct cirrusfb_info { void (*unmap)(struct fb_info *info); }; -static int noaccel __devinitdata; +static bool noaccel __devinitdata; static char *mode_option __devinitdata = "640x480@60"; /****************************************************************************/ diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index 4394389caf6..c645f928265 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -133,7 +133,7 @@ static struct fb_fix_screeninfo hga_fix __devinitdata = { /* Don't assume that tty1 will be the initial current console. */ static int release_io_port = 0; static int release_io_ports = 0; -static int nologo = 0; +static bool nologo = 0; /* ------------------------------------------------------------------------- * diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 5ba39999105..c94c91fd866 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -230,15 +230,15 @@ MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS MODULE_LICENSE("Dual BSD/GPL"); MODULE_DEVICE_TABLE(pci, intelfb_pci_table); -static int accel = 1; +static bool accel = 1; static int vram = 4; -static int hwcursor = 0; -static int mtrr = 1; -static int fixed = 0; -static int noinit = 0; -static int noregister = 0; -static int probeonly = 0; -static int idonly = 0; +static bool hwcursor = 0; +static bool mtrr = 1; +static bool fixed = 0; +static bool noinit = 0; +static bool noregister = 0; +static bool probeonly = 0; +static bool idonly = 0; static int bailearly = 0; static int voffset = 48; static char *mode = NULL; diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index ea7a8ccc830..080c35b34bb 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -21,7 +21,7 @@ #include #endif -static int nologo; +static bool nologo; module_param(nologo, bool, 0); MODULE_PARM_DESC(nologo, "Disables startup logo"); diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index feea7b1dc38..fb3f6739110 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -84,11 +84,11 @@ /* --------------------------------------------------------------------- */ -static int internal; -static int external; -static int libretto; -static int nostretch; -static int nopciburst; +static bool internal; +static bool external; +static bool libretto; +static bool nostretch; +static bool nopciburst; static char *mode_option __devinitdata = NULL; #ifdef MODULE diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 25d8e510319..b291bfaac80 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -47,9 +47,9 @@ static unsigned int def_rotate; static unsigned int def_mirror; #ifdef CONFIG_FB_OMAP_MANUAL_UPDATE -static int manual_update = 1; +static bool manual_update = 1; #else -static int manual_update; +static bool manual_update; #endif static struct platform_device *fbdev_pdev; diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index 86ec12e16c7..da7b1857654 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -50,7 +50,7 @@ module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); #ifdef DEBUG -unsigned int dss_debug; +bool dss_debug; module_param_named(debug, dss_debug, bool, 0644); #endif diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 5abf8e7e745..46f37883e49 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -340,8 +340,8 @@ struct dsi_packet_sent_handler_data { static struct platform_device *dsi_pdev_map[MAX_NUM_DSI]; #ifdef DEBUG -static unsigned int dsi_perf; -module_param_named(dsi_perf, dsi_perf, bool, 0644); +static bool dsi_perf; +module_param(dsi_perf, bool, 0644); #endif static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dsidev) diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 6308fc59fc9..57a52eecee9 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -28,7 +28,7 @@ #endif #ifdef DEBUG -extern unsigned int dss_debug; +extern bool dss_debug; #ifdef DSS_SUBSYS_NAME #define DSSDBG(format, ...) \ if (dss_debug) \ diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 70aa47de714..68ba1f80008 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -43,18 +43,18 @@ static char *def_mode; static char *def_vram; -static int def_vrfb; +static bool def_vrfb; static int def_rotate; -static int def_mirror; +static bool def_mirror; static bool auto_update; static unsigned int auto_update_freq; module_param(auto_update, bool, 0); module_param(auto_update_freq, uint, 0644); #ifdef DEBUG -unsigned int omapfb_debug; +bool omapfb_debug; module_param_named(debug, omapfb_debug, bool, 0644); -static unsigned int omapfb_test_pattern; +static bool omapfb_test_pattern; module_param_named(test, omapfb_test_pattern, bool, 0644); #endif diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h index fdf0edeccf4..e12d384ea52 100644 --- a/drivers/video/omap2/omapfb/omapfb.h +++ b/drivers/video/omap2/omapfb/omapfb.h @@ -32,7 +32,7 @@ #include