From 8e42266965b9db03a86d2cf55400cd3afb67a114 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 3 Dec 2006 09:46:35 +0100 Subject: USB: mutexification of usblp this patch: - converts usblp fully to mutex - makes sleeping interruptible where EINTR can be returned anyway Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 54 +++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 25 deletions(-) (limited to 'drivers/usb/class/usblp.c') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 6303970e93c..24ee8be359f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -130,7 +130,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H struct usblp { struct usb_device *dev; /* USB device */ - struct semaphore sem; /* locks this struct, especially "dev" */ + struct mutex mut; /* locks this struct, especially "dev" */ char *writebuf; /* write transfer_buffer */ char *readbuf; /* read transfer_buffer */ char *statusbuf; /* status transfer_buffer */ @@ -465,7 +465,7 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int twoints[2]; int retval = 0; - down (&usblp->sem); + mutex_lock (&usblp->mut); if (!usblp->present) { retval = -ENODEV; goto done; @@ -644,14 +644,14 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } done: - up (&usblp->sem); + mutex_unlock (&usblp->mut); return retval; } static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { struct usblp *usblp = file->private_data; - int timeout, rv, err = 0, transfer_length = 0; + int timeout, intr, rv, err = 0, transfer_length = 0; size_t writecount = 0; while (writecount < count) { @@ -668,14 +668,16 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t if (rv < 0) return writecount ? writecount : -EINTR; } - down (&usblp->sem); + intr = mutex_lock_interruptible (&usblp->mut); + if (intr) + return writecount ? writecount : -EINTR; if (!usblp->present) { - up (&usblp->sem); + mutex_unlock (&usblp->mut); return -ENODEV; } if (usblp->sleeping) { - up (&usblp->sem); + mutex_unlock (&usblp->mut); return writecount ? writecount : -ENODEV; } @@ -687,10 +689,10 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t err = usblp->writeurb->status; } else err = usblp_check_status(usblp, err); - up (&usblp->sem); + mutex_unlock (&usblp->mut); /* if the fault was due to disconnect, let khubd's - * call to usblp_disconnect() grab usblp->sem ... + * call to usblp_disconnect() grab usblp->mut ... */ schedule (); continue; @@ -702,7 +704,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t */ writecount += transfer_length; if (writecount == count) { - up(&usblp->sem); + mutex_unlock(&usblp->mut); break; } @@ -714,7 +716,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t if (copy_from_user(usblp->writeurb->transfer_buffer, buffer + writecount, transfer_length)) { - up(&usblp->sem); + mutex_unlock(&usblp->mut); return writecount ? writecount : -EFAULT; } @@ -727,10 +729,10 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count = -EIO; else count = writecount ? writecount : -ENOMEM; - up (&usblp->sem); + mutex_unlock (&usblp->mut); break; } - up (&usblp->sem); + mutex_unlock (&usblp->mut); } return count; @@ -739,12 +741,14 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct usblp *usblp = file->private_data; - int rv; + int rv, intr; if (!usblp->bidir) return -EINVAL; - down (&usblp->sem); + intr = mutex_lock_interruptible (&usblp->mut); + if (intr) + return -EINTR; if (!usblp->present) { count = -ENODEV; goto done; @@ -757,9 +761,9 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, count = -EAGAIN; goto done; } - up(&usblp->sem); + mutex_unlock(&usblp->mut); rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present); - down(&usblp->sem); + mutex_lock(&usblp->mut); if (rv < 0) { count = -EINTR; goto done; @@ -807,7 +811,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, } done: - up (&usblp->sem); + mutex_unlock (&usblp->mut); return count; } @@ -886,7 +890,7 @@ static int usblp_probe(struct usb_interface *intf, goto abort; } usblp->dev = dev; - init_MUTEX (&usblp->sem); + mutex_init (&usblp->mut); init_waitqueue_head(&usblp->wait); usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; usblp->intf = intf; @@ -1178,7 +1182,7 @@ static void usblp_disconnect(struct usb_interface *intf) device_remove_file(&intf->dev, &dev_attr_ieee1284_id); mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); usblp->present = 0; usb_set_intfdata (intf, NULL); @@ -1187,7 +1191,7 @@ static void usblp_disconnect(struct usb_interface *intf) usblp->writebuf, usblp->writeurb->transfer_dma); usb_buffer_free (usblp->dev, USBLP_BUF_SIZE, usblp->readbuf, usblp->readurb->transfer_dma); - up (&usblp->sem); + mutex_unlock (&usblp->mut); if (!usblp->used) usblp_cleanup (usblp); @@ -1200,11 +1204,11 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) /* this races against normal access and open */ mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); /* we take no more IO */ usblp->sleeping = 1; usblp_unlink_urbs(usblp); - up (&usblp->sem); + mutex_unlock (&usblp->mut); mutex_unlock (&usblp_mutex); return 0; @@ -1216,12 +1220,12 @@ static int usblp_resume (struct usb_interface *intf) int r; mutex_lock (&usblp_mutex); - down (&usblp->sem); + mutex_lock (&usblp->mut); usblp->sleeping = 0; r = handle_bidir (usblp); - up (&usblp->sem); + mutex_unlock (&usblp->mut); mutex_unlock (&usblp_mutex); return r; -- cgit v1.2.3-70-g09d2 From 4f45d0387b407348de48c212ac5b3496ce6d2fda Mon Sep 17 00:00:00 2001 From: Martin Williges Date: Thu, 28 Dec 2006 20:52:10 +0100 Subject: USB: usblp.c - add Kyocera Mita FS 820 to list of "quirky" printers This patch gets the Kyocera FS-820 working with cups 1.2 via usb again. It adds the printer to the list of "quirky" printers. The printer seems not answer to ID requests some seconds after plugging in. Patch is based on linux-2.6.19.1. Background: As far as I could see (strace, usbmon), the Kyocera FS-820 answers to ID requests only a few seconds after plugging it in. This applies to detecting it with cups and is also true for the printing itself, which is initiated with an ID request. Since I have little usb knowledge, maybe someone can interpret the data, especially the fist bulk transfer - why request 8192 bytes? This is the second version of the patch. usbmon output of printing an email without patch: tail -F /tmp/printlog.txt c636e140 3374734463 S Bi:002:02 -115 8192 < c9d43b40 3374734494 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < c9d43b40 3379732301 C Ci:002:00 -104 0 c636e140 3379733294 C Bi:002:02 -2 0 [...repeating...] with patch: tail -F /tmp/printlog.txt d9cb82c0 3729790131 S Ci:002:00 s a1 00 0000 0000 03ff 1023 < d9cb82c0 3729791725 C Ci:002:00 0 91 = 005b4944 3a46532d 3832303b 4d46473a 4b796f63 6572613b 434d443a 50434c58 df956320 3732493190 S Bo:002:01 -115 1347 = 1b252d31 32333435 5840504a 4c0a4050 4a4c2053 4554204d 414e5541 4c464545 [...more data...] Signed-off-by: Martin Williges Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb/class/usblp.c') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 24ee8be359f..6377db1b446 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -217,6 +217,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ + { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut */ { 0, 0 } }; -- cgit v1.2.3-70-g09d2