From 5945f789c864d8676b297880cc6961fea4511a7a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sun, 30 Jun 2013 14:15:11 +0300 Subject: usb: dwc3: switch to GPL v2 only This is a Linux-only driver which makes use of GPL-only symbols. It makes no sense to maintain Dual BSD/GPL licensing for this driver. Considering that the amount of work to use this driver in any different operating system would likely be as large as developing the driver from scratch and considering that we depend on GPL-only symbols, we will switch over to a GPL v2-only license. Cc: Anton Tikhomirov Acked-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 34 +++++++--------------------------- 1 file changed, 7 insertions(+), 27 deletions(-) (limited to 'drivers/usb/dwc3/ep0.c') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 5acbb948b70..e9d099cee63 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -6,34 +6,14 @@ * Authors: Felipe Balbi , * Sebastian Andrzej Siewior * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2, as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #include -- cgit v1.2.3-70-g09d2 From 7a42d83536a5ea7ea7b4ad279c34c4c4ce509b5a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 22 Jul 2013 12:31:31 +0300 Subject: usb: dwc3: ep0: only change to ADDRESS if set_config() succeeds In case we're switching back to USB_STATE_ADDRESS from USB_STATE_CONFIGURED (if host sends a set configuration command for configuration zero), we should only switch if the request is successfully processed by the gadget driver. Reported-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/dwc3/ep0.c') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index e9d099cee63..007651c2163 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -551,7 +551,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) case USB_STATE_CONFIGURED: ret = dwc3_ep0_delegate_req(dwc, ctrl); - if (!cfg) + if (!cfg && !ret) usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS); break; -- cgit v1.2.3-70-g09d2 From 7c81290e87bf01b507deabf0f478e051367cb416 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 22 Jul 2013 12:41:47 +0300 Subject: usb: dwc3: ep0: don't change to configured state too early before changing to configured state, we need to wait until gadget driver has had a chance to process the request. In case of USB_GADGET_DELAYED_STATUS, that means we need to defer usb_gadget_set_state() until the upcoming usb_ep_queue(). Reported-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/usb/dwc3/ep0.c') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 007651c2163..7fa93f4bc50 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -148,6 +148,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, direction = !dwc->ep0_expect_in; dwc->delayed_status = false; + usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED); if (dwc->ep0state == EP0_STATUS_PHASE) __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); @@ -533,8 +534,16 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) ret = dwc3_ep0_delegate_req(dwc, ctrl); /* if the cfg matches and the cfg is non zero */ if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { - usb_gadget_set_state(&dwc->gadget, - USB_STATE_CONFIGURED); + + /* + * only change state if set_config has already + * been processed. If gadget driver returns + * USB_GADGET_DELAYED_STATUS, we will wait + * to change the state on the next usb_ep_queue() + */ + if (ret == 0) + usb_gadget_set_state(&dwc->gadget, + USB_STATE_CONFIGURED); /* * Enable transition to U1/U2 state when -- cgit v1.2.3-70-g09d2