From 22e0487047567252d5677ff35766cd884375efc2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 17 Mar 2011 22:39:49 +0300 Subject: USB: xhci: unsigned char never equals -1 There were some places that compared port_speed == -1 where port_speed is a u8. This doesn't work unless we cast the -1 to u8. Some places did it correctly. Instead of using -1 directly, I've created a DUPLICATE_ENTRY define which does the cast and is more descriptive as well. Signed-off-by: Dan Carpenter Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host/xhci-mem.c') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a003e79aacd..ab7fc2b71a8 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, * Skip ports that don't have known speeds, or have duplicate * Extended Capabilities port speed entries. */ - if (port_speed == 0 || port_speed == -1) + if (port_speed == 0 || port_speed == DUPLICATE_ENTRY) continue; /* @@ -1727,12 +1727,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, * found a similar duplicate. */ if (xhci->port_array[i] != major_revision && - xhci->port_array[i] != (u8) -1) { + xhci->port_array[i] != DUPLICATE_ENTRY) { if (xhci->port_array[i] == 0x03) xhci->num_usb3_ports--; else xhci->num_usb2_ports--; - xhci->port_array[i] = (u8) -1; + xhci->port_array[i] = DUPLICATE_ENTRY; } /* FIXME: Should we disable the port? */ continue; @@ -1831,7 +1831,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < num_ports; i++) { if (xhci->port_array[i] == 0x03 || xhci->port_array[i] == 0 || - xhci->port_array[i] == -1) + xhci->port_array[i] == DUPLICATE_ENTRY) continue; xhci->usb2_ports[port_index] = -- cgit v1.2.3-70-g09d2 From 575688e1e5f462c44ddd608ce3ec9f38b64c3c0d Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 20 Mar 2011 02:15:16 -0700 Subject: USB: xhci - remove excessive 'inline' markings Remove 'inline' markings from file-local functions and let compiler do its job and inline what makes sense for given architecture. Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-mem.c | 8 ++++---- drivers/usb/host/xhci-ring.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/usb/host/xhci-mem.c') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ab7fc2b71a8..7f56c9b8069 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -982,7 +982,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval * is set to 0. */ -static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, +static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, struct usb_host_endpoint *ep) { unsigned int interval = 0; @@ -1041,7 +1041,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, * transaction opportunities per microframe", but that goes in the Max Burst * endpoint context field. */ -static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, +static u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { if (udev->speed != USB_SPEED_SUPER || @@ -1050,7 +1050,7 @@ static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, return ep->ss_ep_comp.bmAttributes; } -static inline u32 xhci_get_endpoint_type(struct usb_device *udev, +static u32 xhci_get_endpoint_type(struct usb_device *udev, struct usb_host_endpoint *ep) { int in; @@ -1084,7 +1084,7 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev, * Basically, this is the maxpacket size, multiplied by the burst size * and mult size. */ -static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, +static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, struct usb_device *udev, struct usb_host_endpoint *ep) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c6d1462aa1c..0161eb05322 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -93,7 +93,7 @@ dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, /* Does this link TRB point to the first segment in a ring, * or was the previous TRB the last TRB on the last segment in the ERST? */ -static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, +static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == xhci->event_ring) @@ -107,7 +107,7 @@ static inline bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring * segment? I.e. would the updated event TRB pointer step off the end of the * event seg? */ -static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, +static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, struct xhci_segment *seg, union xhci_trb *trb) { if (ring == xhci->event_ring) @@ -116,7 +116,7 @@ static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK); } -static inline int enqueue_is_link_trb(struct xhci_ring *ring) +static int enqueue_is_link_trb(struct xhci_ring *ring) { struct xhci_link_trb *link = &ring->enqueue->link; return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)); @@ -592,7 +592,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, ep->ep_state |= SET_DEQ_PENDING; } -static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, +static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, struct xhci_virt_ep *ep) { ep->ep_state &= ~EP_HALT_PENDING; -- cgit v1.2.3-70-g09d2 From dfa49c4ad120a784ef1ff0717168aa79f55a483a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 23 Mar 2011 22:41:23 -0700 Subject: USB: xhci - fix math in xhci_get_endpoint_interval() When parsing exponent-expressed intervals we subtract 1 from the value and then expect it to match with original + 1, which is highly unlikely, and we end with frequent spew: usb 3-4: ep 0x83 - rounding interval to 512 microframes Also, parsing interval for fullspeed isochronous endpoints was incorrect - according to USB spec they use exponent-based intervals (but xHCI spec claims frame-based intervals). I trust USB spec more, especially since USB core agrees with it. This should be queued for stable kernels back to 2.6.31. Reviewed-by: Micah Elizabeth Scott Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-mem.c | 90 +++++++++++++++++++++++++++++++-------------- 1 file changed, 62 insertions(+), 28 deletions(-) (limited to 'drivers/usb/host/xhci-mem.c') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 7f56c9b8069..627f3438028 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return 0; } +/* + * Convert interval expressed as 2^(bInterval - 1) == interval into + * straight exponent value 2^n == interval. + * + */ +static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval; + + interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; + if (interval != ep->desc.bInterval - 1) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d microframes\n", + ep->desc.bEndpointAddress, + 1 << interval); + + return interval; +} + +/* + * Convert bInterval expressed in frames (in 1-255 range) to exponent of + * microframes, rounded down to nearest power of 2. + */ +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval; + + interval = fls(8 * ep->desc.bInterval) - 1; + interval = clamp_val(interval, 3, 10); + if ((1 << interval) != 8 * ep->desc.bInterval) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", + ep->desc.bEndpointAddress, + 1 << interval, + 8 * ep->desc.bInterval); + + return interval; +} + /* Return the polling or NAK interval. * * The polling interval is expressed in "microframes". If xHCI's Interval field @@ -991,45 +1032,38 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, case USB_SPEED_HIGH: /* Max NAK rate */ if (usb_endpoint_xfer_control(&ep->desc) || - usb_endpoint_xfer_bulk(&ep->desc)) + usb_endpoint_xfer_bulk(&ep->desc)) { interval = ep->desc.bInterval; + break; + } /* Fall through - SS and HS isoc/int have same decoding */ + case USB_SPEED_SUPER: if (usb_endpoint_xfer_int(&ep->desc) || - usb_endpoint_xfer_isoc(&ep->desc)) { - if (ep->desc.bInterval == 0) - interval = 0; - else - interval = ep->desc.bInterval - 1; - if (interval > 15) - interval = 15; - if (interval != ep->desc.bInterval + 1) - dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n", - ep->desc.bEndpointAddress, 1 << interval); + usb_endpoint_xfer_isoc(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); } break; - /* Convert bInterval (in 1-255 frames) to microframes and round down to - * nearest power of 2. - */ + case USB_SPEED_FULL: + if (usb_endpoint_xfer_int(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); + break; + } + /* + * Fall through for isochronous endpoint interval decoding + * since it uses the same rules as low speed interrupt + * endpoints. + */ + case USB_SPEED_LOW: if (usb_endpoint_xfer_int(&ep->desc) || - usb_endpoint_xfer_isoc(&ep->desc)) { - interval = fls(8*ep->desc.bInterval) - 1; - if (interval > 10) - interval = 10; - if (interval < 3) - interval = 3; - if ((1 << interval) != 8*ep->desc.bInterval) - dev_warn(&udev->dev, - "ep %#x - rounding interval" - " to %d microframes, " - "ep desc says %d microframes\n", - ep->desc.bEndpointAddress, - 1 << interval, - 8*ep->desc.bInterval); + usb_endpoint_xfer_isoc(&ep->desc)) { + + interval = xhci_parse_frame_interval(udev, ep); } break; + default: BUG(); } -- cgit v1.2.3-70-g09d2