From 4f45426cfd6170311e116442ccd8ce0e31979237 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Tue, 9 Oct 2007 15:00:05 -0700 Subject: USB: add runtime frame_no quirk for big-endian OHCI Add OHCI big endian frame_no quirk. The frame_no value stored in the HCCA is a 16 bit field at a specific offset, but since not all CPUs can do 16-bit memory accesses it's used as a 32 bit field. And that's why big-endian OHCI must shift 16 bits ... unless the spec is not followed. Currently there's one MPC52xx platform that doesn't need the shift. This patch adds a new "big endian frame_no" quirk to control that at runtime. Signed-off-by: Valentine Barshak Acked-by: Dale Farnsworth Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-ppc-of.c | 5 ++++- drivers/usb/host/ohci-ppc-soc.c | 5 +++++ drivers/usb/host/ohci.h | 13 ++++++------- 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index c43b66acd4d..0a742692015 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -134,8 +134,11 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) } ohci = hcd_to_ohci(hcd); - if (is_bigendian) + if (is_bigendian) { ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; + if (of_device_is_compatible(dn, "mpc5200-ohci")) + ohci->flags |= OHCI_QUIRK_FRAME_NO; + } ohci_hcd_init(ohci); diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 1a2e1777ca6..f95be1896b0 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -73,6 +73,11 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver, ohci = hcd_to_ohci(hcd); ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; + +#ifdef CONFIG_PPC_MPC52xx + /* MPC52xx doesn't need frame_no shift */ + ohci->flags |= OHCI_QUIRK_FRAME_NO; +#endif ohci_hcd_init(ohci); retval = usb_add_hcd(hcd, irq, IRQF_DISABLED); diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index dd4d5b4dcb6..47c5c66a282 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -398,6 +398,7 @@ struct ohci_hcd { #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ +#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ @@ -633,15 +634,12 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) /* HCCA frame number is 16 bits, but is accessed as 32 bits since not all * hardware handles 16 bit reads. That creates a different confusion on * some big-endian SOC implementations. Same thing happens with PSW access. - * - * FIXME: Deal with that as a runtime quirk when STB03xxx is ported over - * to arch/powerpc */ -#ifdef CONFIG_STB03xxx -#define OHCI_BE_FRAME_NO_SHIFT 16 +#ifdef CONFIG_PPC_MPC52xx +#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) #else -#define OHCI_BE_FRAME_NO_SHIFT 0 +#define big_endian_frame_no_quirk(ohci) 0 #endif static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) @@ -649,7 +647,8 @@ static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) u32 tmp; if (big_endian_desc(ohci)) { tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); - tmp >>= OHCI_BE_FRAME_NO_SHIFT; + if (!big_endian_frame_no_quirk(ohci)) + tmp >>= 16; } else tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); -- cgit v1.2.3-70-g09d2