From 824d752b04765fc513fe17666a539f6c73960c4e Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 18 Dec 2013 15:40:11 +0530 Subject: usb: usbtest: Always clear halt else further tests will fail In test_halt() we set an endpoint halt condition and return on halt verification failure, then the enpoint will remain halted and all further tests related to that enpoint will fail. This is because we don't tackle endpoint halt error condition in any of the tests. To avoid that situation, make sure to clear the halt condition before exiting test_halt(). Signed-off-by: Roger Quadros Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/usb/misc') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 6265c549732..0317f10823d 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1554,8 +1554,17 @@ static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb) return retval; } retval = verify_halted(tdev, ep, urb); - if (retval < 0) + if (retval < 0) { + int ret; + + /* clear halt anyways, else further tests will fail */ + ret = usb_clear_halt(urb->dev, urb->pipe); + if (ret) + ERROR(tdev, "ep %02x couldn't clear halt, %d\n", + ep, ret); + return retval; + } /* clear halt (tests API + protocol), verify it worked */ retval = usb_clear_halt(urb->dev, urb->pipe); -- cgit v1.2.3-70-g09d2