From be2dbb09a014cba5691c8483ad2d0747d3eeb514 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:43 +0100 Subject: usb: musb: ux500: move channel number knowledge into the driver For all ux500 based platforms the maximum number of end-points are used. Move this knowledge into the driver so we can relinquish the burden from platform data. This also removes quite a bit of complexity from the driver and will aid us when we come to enable the driver for Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/usb/musb/ux500_dma.c | 30 +++++++++--------------------- 1 file changed, 9 insertions(+), 21 deletions(-) (limited to 'drivers/usb/musb/ux500_dma.c') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 33812064114..382291b91f7 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -48,10 +48,8 @@ struct ux500_dma_channel { struct ux500_dma_controller { struct dma_controller controller; - struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS]; - struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS]; - u32 num_rx_channels; - u32 num_tx_channels; + struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; + struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; void *private_data; dma_addr_t phy_base; }; @@ -144,19 +142,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_channel *ux500_channel = NULL; struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; - u32 max_ch; - /* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated + /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated * to specified hw_ep. For example DMA channel 0 can only be allocated * to hw_ep 1 and 9. */ if (ch_num > 7) ch_num -= 8; - max_ch = is_tx ? controller->num_tx_channels : - controller->num_rx_channels; - - if (ch_num >= max_ch) + if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS) return NULL; ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) : @@ -264,7 +258,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c) struct dma_channel *channel; u8 ch_num; - for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) { + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { channel = &controller->rx_channel[ch_num].channel; ux500_channel = channel->private_data; @@ -274,7 +268,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c) dma_release_channel(ux500_channel->dma_chan); } - for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) { + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { channel = &controller->tx_channel[ch_num].channel; ux500_channel = channel->private_data; @@ -303,26 +297,21 @@ static int ux500_dma_controller_start(struct dma_controller *c) void **param_array; struct ux500_dma_channel *channel_array; - u32 ch_count; dma_cap_mask_t mask; - if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) || - (data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS)) - return -EINVAL; - controller->num_rx_channels = data->num_rx_channels; - controller->num_tx_channels = data->num_tx_channels; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; - ch_count = data->num_rx_channels; param_array = data->dma_rx_param_array; for (dir = 0; dir < 2; dir++) { - for (ch_num = 0; ch_num < ch_count; ch_num++) { + for (ch_num = 0; + ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; + ch_num++) { ux500_channel = &channel_array[ch_num]; ux500_channel->controller = controller; ux500_channel->ch_num = ch_num; @@ -350,7 +339,6 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; - ch_count = data->num_tx_channels; param_array = data->dma_tx_param_array; is_tx = 1; } -- cgit v1.2.3-70-g09d2 From 5f6091a023ca435c49467348e388fa89e635436a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:46 +0100 Subject: usb: musb: ux500: harden checks for platform data In its current state, the ux500-musb driver uses platform data pointers blindly with no prior checking. If no platform data pointer is passed this will Oops the kernel. In this patch we ensure platform data and board data are present prior to using them. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/usb/musb/ux500_dma.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/usb/musb/ux500_dma.c') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 382291b91f7..4bd5400e039 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -289,7 +289,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct musb *musb = controller->private_data; struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; - struct ux500_musb_board_data *data = plat->board_data; + struct ux500_musb_board_data *data; struct dma_channel *dma_channel = NULL; u32 ch_num; u8 dir; @@ -299,14 +299,19 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct ux500_dma_channel *channel_array; dma_cap_mask_t mask; + if (!plat) { + dev_err(musb->controller, "No platform data\n"); + return -EINVAL; + } + data = plat->board_data; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; - param_array = data->dma_rx_param_array; + param_array = data ? data->dma_rx_param_array : NULL; for (dir = 0; dir < 2; dir++) { for (ch_num = 0; @@ -339,7 +344,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; - param_array = data->dma_tx_param_array; + param_array = data ? data->dma_tx_param_array : NULL; is_tx = 1; } -- cgit v1.2.3-70-g09d2 From 2968da0b2c7297a29d49c7084d6865c2cf627093 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 15 May 2013 10:51:47 +0100 Subject: usb: musb: ux500: attempt to find channels by name before using pdata If we can ever get to a state where we can solely search for DMA channels by name, this will almost completely alleviate the requirement to pass copious amounts of information though platform data. Here we take the first step towards this. The next step will be to enable Device Tree complete with name<->event_line mapping. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/usb/musb/ux500_dma.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers/usb/musb/ux500_dma.c') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 4bd5400e039..7d80699a5ff 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -34,6 +34,11 @@ #include #include "musb_core.h" +static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12", + "iep_5_13", "iep_6_14", "iep_7_15", "iep_8" }; +static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12", + "oep_5_13", "oep_6_14", "oep_7_15", "oep_8" }; + struct ux500_dma_channel { struct dma_channel channel; struct ux500_dma_controller *controller; @@ -291,6 +296,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) struct musb_hdrc_platform_data *plat = dev->platform_data; struct ux500_musb_board_data *data; struct dma_channel *dma_channel = NULL; + char **chan_names; u32 ch_num; u8 dir; u8 is_tx = 0; @@ -312,6 +318,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for RX channels */ channel_array = controller->rx_channel; param_array = data ? data->dma_rx_param_array : NULL; + chan_names = (char **)iep_chan_names; for (dir = 0; dir < 2; dir++) { for (ch_num = 0; @@ -327,9 +334,15 @@ static int ux500_dma_controller_start(struct dma_controller *c) dma_channel->status = MUSB_DMA_STATUS_FREE; dma_channel->max_len = SZ_16M; - ux500_channel->dma_chan = dma_request_channel(mask, - data->dma_filter, - param_array[ch_num]); + ux500_channel->dma_chan = + dma_request_slave_channel(dev, chan_names[ch_num]); + + if (!ux500_channel->dma_chan) + ux500_channel->dma_chan = + dma_request_channel(mask, + data->dma_filter, + param_array[ch_num]); + if (!ux500_channel->dma_chan) { ERR("Dma pipe allocation error dir=%d ch=%d\n", dir, ch_num); @@ -345,6 +358,7 @@ static int ux500_dma_controller_start(struct dma_controller *c) /* Prepare the loop for TX channels */ channel_array = controller->tx_channel; param_array = data ? data->dma_tx_param_array : NULL; + chan_names = (char **)oep_chan_names; is_tx = 1; } -- cgit v1.2.3-70-g09d2