From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/net/pegasus.h | 298 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 298 insertions(+) create mode 100644 drivers/usb/net/pegasus.h (limited to 'drivers/usb/net/pegasus.h') diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h new file mode 100644 index 00000000000..13ccedef5c7 --- /dev/null +++ b/drivers/usb/net/pegasus.h @@ -0,0 +1,298 @@ +/* + * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#ifndef PEGASUS_DEV + +#define PEGASUS_II 0x80000000 +#define HAS_HOME_PNA 0x40000000 + +#define PEGASUS_MTU 1536 +#define RX_SKBS 4 + +#define EPROM_WRITE 0x01 +#define EPROM_READ 0x02 +#define EPROM_DONE 0x04 +#define EPROM_WR_ENABLE 0x10 +#define EPROM_LOAD 0x20 + +#define PHY_DONE 0x80 +#define PHY_READ 0x40 +#define PHY_WRITE 0x20 +#define DEFAULT_GPIO_RESET 0x24 +#define LINKSYS_GPIO_RESET 0x24 +#define DEFAULT_GPIO_SET 0x26 + +#define PEGASUS_PRESENT 0x00000001 +#define PEGASUS_TX_BUSY 0x00000004 +#define PEGASUS_RX_BUSY 0x00000008 +#define CTRL_URB_RUNNING 0x00000010 +#define CTRL_URB_SLEEP 0x00000020 +#define PEGASUS_UNPLUG 0x00000040 +#define PEGASUS_RX_URB_FAIL 0x00000080 +#define ETH_REGS_CHANGE 0x40000000 +#define ETH_REGS_CHANGED 0x80000000 + +#define RX_MULTICAST 2 +#define RX_PROMISCUOUS 4 + +#define REG_TIMEOUT (HZ) +#define PEGASUS_TX_TIMEOUT (HZ*10) + +#define TX_UNDERRUN 0x80 +#define EXCESSIVE_COL 0x40 +#define LATE_COL 0x20 +#define NO_CARRIER 0x10 +#define LOSS_CARRIER 0x08 +#define JABBER_TIMEOUT 0x04 + +#define LINK_STATUS 0x01 + +#define PEGASUS_REQT_READ 0xc0 +#define PEGASUS_REQT_WRITE 0x40 +#define PEGASUS_REQ_GET_REGS 0xf0 +#define PEGASUS_REQ_SET_REGS 0xf1 +#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS + +enum pegasus_registers { + EthCtrl0 = 0, + EthCtrl1 = 1, + EthCtrl2 = 2, + EthID = 0x10, + Reg1d = 0x1d, + EpromOffset = 0x20, + EpromData = 0x21, /* 0x21 low, 0x22 high byte */ + EpromCtrl = 0x23, + PhyAddr = 0x25, + PhyData = 0x26, /* 0x26 low, 0x27 high byte */ + PhyCtrl = 0x28, + UsbStst = 0x2a, + EthTxStat0 = 0x2b, + EthTxStat1 = 0x2c, + EthRxStat = 0x2d, + WakeupControl = 0x78, + Reg7b = 0x7b, + Gpio0 = 0x7e, + Gpio1 = 0x7f, + Reg81 = 0x81, +}; + + +typedef struct pegasus { + struct usb_device *usb; + struct usb_interface *intf; + struct net_device *net; + struct net_device_stats stats; + struct mii_if_info mii; + unsigned flags; + unsigned features; + u32 msg_enable; + u32 wolopts; + int dev_index; + int intr_interval; + struct tasklet_struct rx_tl; + struct work_struct carrier_check; + struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb; + struct sk_buff *rx_pool[RX_SKBS]; + struct sk_buff *rx_skb; + struct usb_ctrlrequest dr; + wait_queue_head_t ctrl_wait; + spinlock_t rx_pool_lock; + int chip; + unsigned char intr_buff[8]; + __u8 tx_buff[PEGASUS_MTU]; + __u8 eth_regs[4]; + __u8 phy; + __u8 gpio_res; +} pegasus_t; + + +struct usb_eth_dev { + char *name; + __u16 vendor; + __u16 device; + __u32 private; /* LSB is gpio reset value */ +}; + +#define VENDOR_3COM 0x0506 +#define VENDOR_ABOCOM 0x07b8 +#define VENDOR_ACCTON 0x083a +#define VENDOR_ADMTEK 0x07a6 +#define VENDOR_AEILAB 0x3334 +#define VENDOR_ALLIEDTEL 0x07c9 +#define VENDOR_ATEN 0x0557 +#define VENDOR_BELKIN 0x050d +#define VENDOR_BILLIONTON 0x08dd +#define VENDOR_COMPAQ 0x049f +#define VENDOR_COREGA 0x07aa +#define VENDOR_DLINK 0x2001 +#define VENDOR_ELCON 0x0db7 +#define VENDOR_ELSA 0x05cc +#define VENDOR_GIGABYTE 0x1044 +#define VENDOR_HAWKING 0x0e66 +#define VENDOR_HP 0x03f0 +#define VENDOR_IODATA 0x04bb +#define VENDOR_KINGSTON 0x0951 +#define VENDOR_LANEED 0x056e +#define VENDOR_LINKSYS 0x066b +#define VENDOR_MELCO 0x0411 +#define VENDOR_MICROSOFT 0x045e +#define VENDOR_MOBILITY 0x1342 +#define VENDOR_NETGEAR 0x0846 +#define VENDOR_OCT 0x0b39 +#define VENDOR_SMARTBRIDGES 0x08d1 +#define VENDOR_SMC 0x0707 +#define VENDOR_SOHOWARE 0x15e8 +#define VENDOR_SIEMENS 0x067c + + +#else /* PEGASUS_DEV */ + +PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c, + DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) +PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", + VENDOR_ADMTEK, 0x8511, + DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) +PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet", + VENDOR_ADMTEK, 0x8513, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet", + VENDOR_ADMTEK, 0x8515, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)", + VENDOR_ADMTEK, 0x0986, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Corega FEter USB-TX", VENDOR_COREGA, 0x0004, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001, + LINKSYS_GPIO_RESET ) +PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002, + LINKSYS_GPIO_RESET ) +PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102, + LINKSYS_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b, + LINKSYS_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c, + LINKSYS_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003, + DEFAULT_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002, + DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) +PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, + DEFAULT_GPIO_RESET) +PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202, + LINKSYS_GPIO_RESET ) +PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203, + LINKSYS_GPIO_RESET ) +PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204, + LINKSYS_GPIO_RESET | HAS_HOME_PNA ) +PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206, + LINKSYS_GPIO_RESET | PEGASUS_II) +PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b, + LINKSYS_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c, + LINKSYS_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201, + DEFAULT_GPIO_RESET | PEGASUS_II) +PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100, + DEFAULT_GPIO_RESET ) +PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110, + DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001, + DEFAULT_GPIO_RESET | PEGASUS_II ) + + +#endif /* PEGASUS_DEV */ -- cgit v1.2.3-70-g09d2