From 657b306a7bdfca4ae1514b533a0e7c3c6d26dbc6 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 6 Sep 2012 20:27:06 +0530 Subject: usb: phy: add a new driver for omap usb2 phy All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- drivers/usb/phy/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/usb/phy/Kconfig') diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 2838adb225e..63c339b3e67 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -4,6 +4,15 @@ comment "USB Physical Layer drivers" depends on USB || USB_GADGET +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + select USB_OTG_UTILS + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET -- cgit v1.2.3-70-g09d2