From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/serial/keyspan_usa28msg.h | 201 ++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 drivers/usb/serial/keyspan_usa28msg.h (limited to 'drivers/usb/serial/keyspan_usa28msg.h') diff --git a/drivers/usb/serial/keyspan_usa28msg.h b/drivers/usb/serial/keyspan_usa28msg.h new file mode 100644 index 00000000000..dee454c4609 --- /dev/null +++ b/drivers/usb/serial/keyspan_usa28msg.h @@ -0,0 +1,201 @@ +/* + usa28msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA26X + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Note: these message formats are common to USA18, USA19, and USA28; + (for USA28X, see usa26msg.h) + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USA28, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data. + If the port is configured for parity, the data will be an + alternating string of parity and data bytes, so the message + format will be: + + RQSTACK PAR DAT PAR DAT ... + + so the maximum length is 63 bytes (1 + 62, or 31 data bytes); + always an odd number for the total message length. + + If there is no parity, the format is simply: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USA28 -> host, receive) messages contain data and parity + if parity is configred, thusly: + + DAT PAR DAT PAR DAT PAR ... + + for a total of 32 data bytes; + + If parity is not configured, the format is: + + DAT DAT DAT ... + + for a total of 64 data bytes. + + In the TX messages (USB OUT), the 0x01 bit of the PARity byte is + the parity bit. In the RX messages (USB IN), the PARity byte is + the content of the 8051's status register; the parity bit + (RX_PARITY_BIT) is the 0x04 bit. + + revision history: + + 1999may06 add resetDataToggle to control message + 2000mar21 add rs232invalid to status response message + 2000apr04 add 230.4Kb definition to setBaudRate + 2000apr13 add/remove loopbackMode switch + 2000apr13 change definition of setBaudRate to cover 115.2Kb, too + 2000jun01 add extended BSD-style copyright text +*/ + +#ifndef __USA28MSG__ +#define __USA28MSG__ + + +struct keyspan_usa28_portControlMessage +{ + /* + there are four types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA28): + */ + u8 setBaudRate, // 0=don't set, 1=baudLo/Hi, 2=115.2K, 3=230.4K + baudLo, // host does baud divisor calculation + baudHi; // baudHi is only used for first port (gives lower rates) + + /* + 2. configuration changes which are done every time (because it's + hardly more trouble to do them than to check whether to do them): + */ + u8 parity, // 1=use parity, 0=don't + ctsFlowControl, // all except 19Q: 1=use CTS flow control, 0=don't + // 19Q: 0x08:CTSflowControl 0x10:DSRflowControl + xonFlowControl, // 1=use XON/XOFF flow control, 0=don't + rts, // 1=on, 0=off + dtr; // 1=on, 0=off + + /* + 3. configuration data which is simply used as is (no overhead, + but must be correct in every host message). + */ + u8 forwardingLength, // forward when this number of chars available + forwardMs, // forward this many ms after last rx data + breakThreshold, // specified in ms, 1-255 (see note below) + xonChar, // specified in current character format + xoffChar; // specified in current character format + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // enable transmitting (and continue if there's data) + _txOff, // stop transmitting + txFlush, // toss outbound data + txForceXoff, // pretend we've received XOFF + txBreak, // turn on break (leave on until txOn clears it) + rxOn, // turn on receiver + rxOff, // turn off receiver + rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW + returnStatus, // return current status n times (1 or 2) + resetDataToggle;// reset data toggle state to DATA0 + +}; + +struct keyspan_usa28_portStatusMessage +{ + u8 port, // 0=first, 1=second, 2=global (see below) + cts, + dsr, // (not used in all products) + dcd, + + ri, // (not used in all products) + _txOff, // port has been disabled (by host) + _txXoff, // port is in XOFF state (either host or RX XOFF) + dataLost, // count of lost chars; wraps; not guaranteed exact + + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + rxBreak, // 1=we're in break state + rs232invalid, // 1=no valid signals on rs-232 inputs + controlResponse;// 1=a control messages has been processed +}; + +// bit defines in txState +#define TX_OFF 0x01 // requested by host txOff command +#define TX_XOFF 0x02 // either real, or simulated by host + +struct keyspan_usa28_globalControlMessage +{ + u8 sendGlobalStatus, // 2=request for two status responses + resetStatusToggle, // 1=reset global status toggle + resetStatusCount; // a cycling value +}; + +struct keyspan_usa28_globalStatusMessage +{ + u8 port, // 3 + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa28_globalDebugMessage +{ + u8 port, // 2 + n, // typically a count/status byte + b; // typically a data byte +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// the parity bytes have only one significant bit +#define RX_PARITY_BIT 0x04 +#define TX_PARITY_BIT 0x01 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +#endif + -- cgit v1.2.3-70-g09d2