From ea65370d025f5005649e5cb37c4d025e92c6fc38 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driver I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb62..825451b3788 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -311,7 +311,7 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { +static struct usb_serial_driver handspring_device = { .owner = THIS_MODULE, .name = "Handspring Visor / Palm OS", .short_name = "visor", @@ -339,7 +339,7 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { +static struct usb_serial_driver clie_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 5.0", .short_name = "clie_5", @@ -367,7 +367,7 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { +static struct usb_serial_driver clie_3_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 3.5", .short_name = "clie_3.5", -- cgit v1.2.3-70-g09d2 From 18fcac353fdc7cd072b0d24c8667042e675a4c11 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 4 +++- drivers/usb/serial/belkin_sa.c | 4 +++- drivers/usb/serial/bus.c | 9 ++++----- drivers/usb/serial/cp2101.c | 4 +++- drivers/usb/serial/cyberjack.c | 4 +++- drivers/usb/serial/cypress_m8.c | 8 ++++++-- drivers/usb/serial/digi_acceleport.c | 8 ++++++-- drivers/usb/serial/empeg.c | 4 +++- drivers/usb/serial/ftdi_sio.c | 4 +++- drivers/usb/serial/garmin_gps.c | 4 +++- drivers/usb/serial/generic.c | 4 +++- drivers/usb/serial/hp4x.c | 4 +++- drivers/usb/serial/io_tables.h | 12 +++++++++--- drivers/usb/serial/io_ti.c | 8 ++++++-- drivers/usb/serial/ipaq.c | 4 +++- drivers/usb/serial/ipw.c | 4 +++- drivers/usb/serial/ir-usb.c | 4 +++- drivers/usb/serial/keyspan.h | 16 ++++++++++++---- drivers/usb/serial/keyspan_pda.c | 12 +++++++++--- drivers/usb/serial/kl5kusb105.c | 4 +++- drivers/usb/serial/kobil_sct.c | 4 +++- drivers/usb/serial/mct_u232.c | 4 +++- drivers/usb/serial/omninet.c | 4 +++- drivers/usb/serial/option.c | 4 +++- drivers/usb/serial/pl2303.c | 4 +++- drivers/usb/serial/safe_serial.c | 4 +++- drivers/usb/serial/ti_usb_3410_5052.c | 8 ++++++-- drivers/usb/serial/usb-serial.c | 22 +++++++++++----------- drivers/usb/serial/usb-serial.h | 5 +++-- drivers/usb/serial/visor.c | 12 +++++++++--- drivers/usb/serial/whiteheat.c | 8 ++++++-- 31 files changed, 144 insertions(+), 60 deletions(-) (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 104c04385bb..fbc5b9b4474 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -31,7 +31,9 @@ static struct usb_driver airprime_driver = { }; static struct usb_serial_driver airprime_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6d84de40cb7..4878961a090 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -122,7 +122,9 @@ static struct usb_driver belkin_driver = { /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", .id_table = id_table_combined, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5a0bcd34bb6..b8364a8de7d 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -92,13 +92,13 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; @@ -120,7 +120,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; - driver->driver.owner = driver->owner; retval = driver_register(&driver->driver); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 0b45b58bef5..81dd720a122 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -74,7 +74,9 @@ static struct usb_driver cp2101_driver = { }; static struct usb_serial_driver cp2101_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 9f421a3c47e..3441bad74f7 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -84,7 +84,9 @@ static struct usb_driver cyberjack_driver = { }; static struct usb_serial_driver cyberjack_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", .id_table = id_table, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4fb8e59d152..b4069af4d56 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -177,7 +177,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "DeLorme Earthmate USB", .short_name = "earthmate", .id_table = id_table_earthmate, @@ -204,7 +206,9 @@ static struct usb_serial_driver cypress_earthmate_device = { }; static struct usb_serial_driver cypress_hidcom_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", .id_table = id_table_cyphidcomrs232, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 66feb88b431..be9b495d249 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -504,7 +504,9 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 2 port USB adapter", .short_name = "digi_2", .id_table = id_table_2, @@ -531,7 +533,9 @@ static struct usb_serial_driver digi_acceleport_2_device = { }; static struct usb_serial_driver digi_acceleport_4_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 4 port USB adapter", .short_name = "digi_4", .id_table = id_table_4, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbea8b38b60..3e6c4ba7667 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -113,7 +113,9 @@ static struct usb_driver empeg_driver = { }; static struct usb_serial_driver empeg_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 529e1a7ccfa..9d945de0aca 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -563,7 +563,9 @@ static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", .id_table = id_table_combined, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 7361194f1d6..3fd98c00cd6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1470,7 +1470,9 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", .id_table = id_table, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7f567bf9654..779bea0c624 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,7 +37,9 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Generic", .short_name = "generic", .id_table = generic_device_ids, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index b49469907a8..4f3cbc08c4e 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -45,7 +45,9 @@ static struct usb_driver hp49gp_driver = { }; static struct usb_serial_driver hp49gp_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7314c04727f..28fb0d42a16 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -76,7 +76,9 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", .id_table = edgeport_2port_id_table, @@ -104,7 +106,9 @@ static struct usb_serial_driver edgeport_2port_device = { }; static struct usb_serial_driver edgeport_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", .id_table = edgeport_4port_id_table, @@ -132,7 +136,9 @@ static struct usb_serial_driver edgeport_4port_device = { }; static struct usb_serial_driver edgeport_8port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", .id_table = edgeport_8port_id_table, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4328cc702ef..74228a07264 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2983,7 +2983,9 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", .id_table = edgeport_1port_id_table, @@ -3011,7 +3013,9 @@ static struct usb_serial_driver edgeport_1port_device = { }; static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", .id_table = edgeport_2port_id_table, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9a79ad8d7a5..9aedfb91b20 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -548,7 +548,9 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ static struct usb_serial_driver ipaq_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 04524d34de3..2ba69623ac0 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -444,7 +444,9 @@ static int ipw_disconnect(struct usb_serial_port *port) } static struct usb_serial_driver ipw_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IPWireless converter", .short_name = "ipw", .id_table = usb_ipw_ids, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ecfb2060ea0..bf079059819 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -134,7 +134,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 97e7d9e53e3..124d46e76a2 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -571,7 +571,9 @@ static struct usb_device_id keyspan_4port_ids[] = { /* Structs for the devices, pre and post renumeration. */ static struct usb_serial_driver keyspan_pre_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", .id_table = keyspan_pre_ids, @@ -583,7 +585,9 @@ static struct usb_serial_driver keyspan_pre_device = { }; static struct usb_serial_driver keyspan_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", .id_table = keyspan_1port_ids, @@ -608,7 +612,9 @@ static struct usb_serial_driver keyspan_1port_device = { }; static struct usb_serial_driver keyspan_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", .id_table = keyspan_2port_ids, @@ -633,7 +639,9 @@ static struct usb_serial_driver keyspan_2port_device = { }; static struct usb_serial_driver keyspan_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", .id_table = keyspan_4port_ids, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 8fad0e963dd..389b7833e3a 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -784,7 +784,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) #ifdef KEYSPAN static struct usb_serial_driver keyspan_pda_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", .id_table = id_table_fake, @@ -798,7 +800,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { #ifdef XIRCOM static struct usb_serial_driver xircom_pgs_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", .id_table = id_table_fake_xircom, @@ -811,7 +815,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { #endif static struct usb_serial_driver keyspan_pda_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA", .short_name = "keyspan_pda", .id_table = id_table_std, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index be082706b95..586108ce789 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,7 +124,9 @@ static struct usb_driver kl5kusb105d_driver = { }; static struct usb_serial_driver kl5kusb105d_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", .id_table = id_table, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 94944340bb8..a9578e05b22 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -106,7 +106,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 9470964316a..7dcf91c5f83 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -133,7 +133,9 @@ static struct usb_driver mct_u232_driver = { }; static struct usb_serial_driver mct_u232_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "MCT U232", .short_name = "mct_u232", .id_table = id_table_combined, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 53c0588877c..f6327cc1b2e 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -89,7 +89,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6ec9266e2e9..a2b5adf3486 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -106,7 +106,9 @@ static struct usb_driver option_driver = { * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Option 3G data card", .short_name = "option", .id_table = option_ids, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7134648e078..beef3c4cee6 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -176,7 +176,9 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ static struct usb_serial_driver pl2303_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 87871bb647d..42a86ab689f 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -398,7 +398,9 @@ static int safe_startup (struct usb_serial *serial) } static struct usb_serial_driver safe_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2efaf6f3d7..eab8a6de092 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -256,7 +256,9 @@ static struct usb_driver ti_usb_driver = { }; static struct usb_serial_driver ti_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, @@ -283,7 +285,9 @@ static struct usb_serial_driver ti_1port_device = { }; static struct usb_serial_driver ti_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf083da15eb..08f600327db 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +522,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +553,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -718,8 +718,8 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); length += sprintf (page+length, " name:\"%s\"", serial->type->name); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), @@ -900,7 +900,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +908,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -1007,13 +1007,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +1158,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index d6738b1b042..4ca5e0c0561 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -189,7 +189,6 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @owner: pointer to the module that owns this driver. * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. * @short_name: a pointer to a string that describes this driver in @@ -226,9 +225,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * */ struct usb_serial_driver { - struct module *owner; char *name; char *short_name; const struct usb_device_id *id_table; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 825451b3788..0ac0377e868 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -312,7 +312,9 @@ static struct usb_driver visor_driver = { /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, @@ -340,7 +342,9 @@ static struct usb_serial_driver handspring_device = { /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_driver clie_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, @@ -368,7 +372,9 @@ static struct usb_serial_driver clie_5_device = { /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_driver clie_3_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index dc06664bfa0..fb95a34a1cf 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,9 @@ static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", .id_table = id_table_prerenumeration, @@ -170,7 +172,9 @@ static struct usb_serial_driver whiteheat_fake_device = { }; static struct usb_serial_driver whiteheat_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", .id_table = id_table_std, -- cgit v1.2.3-70-g09d2 From 502b95c1cc9e2c855a26f90fc999c5211b8ba957 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move old changelog comments out of source code Create a new file just for these things, as they just get in the way in the source files. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ChangeLog.old | 730 +++++++++++++++++++++++++++++++++++++++ drivers/usb/serial/io_edgeport.c | 219 ------------ drivers/usb/serial/pl2303.c | 23 +- drivers/usb/serial/usb-serial.c | 309 +---------------- drivers/usb/serial/usb-serial.h | 44 +-- drivers/usb/serial/visor.c | 131 +------ 6 files changed, 736 insertions(+), 720 deletions(-) create mode 100644 drivers/usb/serial/ChangeLog.old (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old new file mode 100644 index 00000000000..c1b279939bb --- /dev/null +++ b/drivers/usb/serial/ChangeLog.old @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for Clié devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 04bfe279d76..dc4c498bd1e 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -27,225 +27,6 @@ * Networks technical support, or Peter Berger , * or Al Borchers . * - * Version history: - * - * 2003_04_03 al borchers - * - fixed a bug (that shows up with dosemu) where the tty struct is - * used in a callback after it has been freed - * - * 2.3 2002_03_08 greg kroah-hartman - * - fixed bug when multiple devices were attached at the same time. - * - * 2.2 2001_11_14 greg kroah-hartman - * - fixed bug in edge_close that kept the port from being used more - * than once. - * - fixed memory leak on device removal. - * - fixed potential double free of memory when command urb submitting - * failed. - * - other small cleanups when the device is removed - * - * 2.1 2001_07_09 greg kroah-hartman - * - added support for TIOCMBIS and TIOCMBIC. - * - * (04/08/2001) gb - * - Identify version on module load. - * - * 2.0 2001_03_05 greg kroah-hartman - * - reworked entire driver to fit properly in with the other usb-serial - * drivers. Occasional oopses still happen, but it's a good start. - * - * 1.2.3 (02/23/2001) greg kroah-hartman - * - changed device table to work properly for 2.4.x final format. - * - fixed problem with dropping data at high data rates. - * - * 1.2.2 (11/27/2000) greg kroah-hartman - * - cleaned up more NTisms. - * - Added device table for 2.4.0-test11 - * - * 1.2.1 (11/08/2000) greg kroah-hartman - * - Started to clean up NTisms. - * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - * - * 1.2 (10/17/2000) David Iacovelli - * Remove all EPIC code and GPL source - * Fix RELEVANT_IFLAG macro to include flow control - * changes port configuration changes. - * Fix redefinition of SERIAL_MAGIC - * Change all timeout values to 5 seconds - * Tried to fix the UHCI multiple urb submission, but failed miserably. - * it seems to work fine with OHCI. - * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - * find a way to work arount this UHCI bug ) - * - * 1.1 (10/11/2000) David Iacovelli - * Fix XON/XOFF flow control to support both IXON and IXOFF - * - * 0.9.27 (06/30/2000) David Iacovelli - * Added transmit queue and now allocate urb for command writes. - * - * 0.9.26 (06/29/2000) David Iacovelli - * Add support for 80251 based edgeport - * - * 0.9.25 (06/27/2000) David Iacovelli - * Do not close the port if it has multiple opens. - * - * 0.9.24 (05/26/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * and first cut at running BlackBox Demo - * - * 0.9.23 (05/24/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * - * 0.9.22 (05/23/2000) David Iacovelli - * fixed bug in enumeration. If epconfig turns on mapping by - * path after a device is already plugged in, we now update - * the mapping correctly - * - * 0.9.21 (05/16/2000) David Iacovelli - * Added BlockUntilChaseResp() to also wait for txcredits - * Updated the way we allocate and handle write URBs - * Add debug code to dump buffers - * - * 0.9.20 (05/01/2000) David Iacovelli - * change driver to use usb/tts/ - * - * 0.9.19 (05/01/2000) David Iacovelli - * Update code to compile if DEBUG is off - * - * 0.9.18 (04/28/2000) David Iacovelli - * cleanup and test tty_register with devfs - * - * 0.9.17 (04/27/2000) greg kroah-hartman - * changed tty_register around to be like the way it - * was before, but now it works properly with devfs. - * - * 0.9.16 (04/26/2000) david iacovelli - * Fixed bug in GetProductInfo() - * - * 0.9.15 (04/25/2000) david iacovelli - * Updated enumeration - * - * 0.9.14 (04/24/2000) david iacovelli - * Removed all config/status IOCTLS and - * converted to using /proc/edgeport - * still playing with devfs - * - * 0.9.13 (04/24/2000) david iacovelli - * Removed configuration based on ttyUSB0 - * Added support for configuration using /prod/edgeport - * first attempt at using devfs (not working yet!) - * Added IOCTL to GetProductInfo() - * Added support for custom baud rates - * Add support for random port numbers - * - * 0.9.12 (04/18/2000) david iacovelli - * added additional configuration IOCTLs - * use ttyUSB0 for configuration - * - * 0.9.11 (04/17/2000) greg kroah-hartman - * fixed module initialization race conditions. - * made all urbs dynamically allocated. - * made driver devfs compatible. now it only registers the tty device - * when the device is actually plugged in. - * - * 0.9.10 (04/13/2000) greg kroah-hartman - * added proc interface framework. - * - * 0.9.9 (04/13/2000) david iacovelli - * added enumeration code and ioctls to configure the device - * - * 0.9.8 (04/12/2000) david iacovelli - * Change interrupt read start when device is plugged in - * and stop when device is removed - * process interrupt reads when all ports are closed - * (keep value of rxBytesAvail consistent with the edgeport) - * set the USB_BULK_QUEUE flag so that we can shove a bunch - * of urbs at once down the pipe - * - * 0.9.7 (04/10/2000) david iacovelli - * start to add enumeration code. - * generate serial number for epic devices - * add support for kdb - * - * 0.9.6 (03/30/2000) david iacovelli - * add IOCTL to get string, manufacture, and boot descriptors - * - * 0.9.5 (03/14/2000) greg kroah-hartman - * more error checking added to SerialOpen to try to fix UHCI open problem - * - * 0.9.4 (03/09/2000) greg kroah-hartman - * added more error checking to handle oops when data is hanging - * around and tty is abruptly closed. - * - * 0.9.3 (03/09/2000) david iacovelli - * Add epic support for xon/xoff chars - * play with performance - * - * 0.9.2 (03/08/2000) greg kroah-hartman - * changed most "info" calls to "dbg" - * implemented flow control properly in the termios call - * - * 0.9.1 (03/08/2000) david iacovelli - * added EPIC support - * enabled bootloader update - * - * 0.9 (03/08/2000) greg kroah-hartman - * Release to IO networks. - * Integrated changes that David made - * made getting urbs for writing SMP safe - * - * 0.8 (03/07/2000) greg kroah-hartman - * Release to IO networks. - * Fixed problems that were seen in code by David. - * Now both Edgeport/4 and Edgeport/2 works properly. - * Changed most of the functions to use port instead of serial. - * - * 0.7 (02/27/2000) greg kroah-hartman - * Milestone 3 release. - * Release to IO Networks - * ioctl for waiting on line change implemented. - * ioctl for getting statistics implemented. - * multiport support working. - * lsr and msr registers are now handled properly. - * change break now hooked up and working. - * support for all known Edgeport devices. - * - * 0.6 (02/22/2000) greg kroah-hartman - * Release to IO networks. - * CHASE is implemented correctly when port is closed. - * SerialOpen now blocks correctly until port is fully opened. - * - * 0.5 (02/20/2000) greg kroah-hartman - * Release to IO networks. - * Known problems: - * modem status register changes are not sent on to the user - * CHASE is not implemented when the port is closed. - * - * 0.4 (02/16/2000) greg kroah-hartman - * Second cut at the CeBit demo. - * Doesn't leak memory on every write to the port - * Still small leaks on startup. - * Added support for Edgeport/2 and Edgeport/8 - * - * 0.3 (02/15/2000) greg kroah-hartman - * CeBit demo release. - * Force the line settings to 4800, 8, 1, e for the demo. - * Warning! This version leaks memory like crazy! - * - * 0.2 (01/30/2000) greg kroah-hartman - * Milestone 1 release. - * Device is found by USB subsystem, enumerated, fimware is downloaded - * and the descriptors are printed to the debug log, config is set, and - * green light starts to blink. Open port works, and data can be sent - * and received at the default settings of the UART. Loopback connector - * and debug log confirms this. - * - * 0.1 (01/23/2000) greg kroah-hartman - * Initial release to help IO Networks try to set up their test system. - * Edgeport4 is recognized, firmware is downloaded, config is set so - * device blinks green light every 3 sec. Port is bound, but opening, - * closing, and sending data do not work properly. - * */ #include diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index beef3c4cee6..29719ceab19 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -8,31 +8,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * 2002_Mar_26 gkh - * allowed driver to work properly if there is no tty assigned to a port - * (this happens for serial console devices.) - * - * 2001_Oct_06 gkh - * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - * - * 2001_Sep_19 gkh - * Added break support. - * - * 2001_Aug_30 gkh - * fixed oops in write_bulk_callback. - * - * 2001_Aug_28 gkh - * reworked buffer logic to be like other usb-serial drivers. Hopefully - * removing some reported problems. - * - * 2001_Jun_06 gkh - * finished porting to 2.4 format. - * */ #include diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 08f600327db..fde09fba879 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,7 +1,7 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) * @@ -9,316 +9,11 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * This driver was originally based on the ACM driver by Armin Fuerst (which was + * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (12/10/2002) gkh - * Split the ports off into their own struct device, and added a - * usb-serial bus driver. - * - * (11/19/2002) gkh - * removed a few #ifdefs for the generic code and cleaned up the failure - * logic in initialization. - * - * (10/02/2002) gkh - * moved the console code to console.c and out of this file. - * - * (06/05/2002) gkh - * moved location of startup() call in serial_probe() until after all - * of the port information and endpoints are initialized. This makes - * things easier for some drivers. - * - * (04/10/2002) gkh - * added serial_read_proc function which creates a - * /proc/tty/driver/usb-serial file. - * - * (03/27/2002) gkh - * Got USB serial console code working properly and merged into the main - * version of the tree. Thanks to Randy Dunlap for the initial version - * of this code, and for pushing me to finish it up. - * The USB serial console works with any usb serial driver device. - * - * (03/21/2002) gkh - * Moved all manipulation of port->open_count into the core. Now the - * individual driver's open and close functions are called only when the - * first open() and last close() is called. Making the drivers a bit - * smaller and simpler. - * Fixed a bug if a driver didn't have the owner field set. - * - * (02/26/2002) gkh - * Moved all locking into the main serial_* functions, instead of having - * the individual drivers have to grab the port semaphore. This should - * reduce races. - * Reworked the MOD_INC logic a bit to always increment and decrement, even - * if the generic driver is being used. - * - * (10/10/2001) gkh - * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - * help prevent child drivers from accessing the device since it is now - * gone. - * - * (09/13/2001) gkh - * Moved generic driver initialize after we have registered with the USB - * core. Thanks to Randy Dunlap for pointing this problem out. - * - * (07/03/2001) gkh - * Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - * Fixed vendor and product getting defined through the MODULE_PARM macro - * if the Generic driver wasn't compiled in. - * Fixed problem with generic_shutdown() not being called for drivers that - * don't have a shutdown() function. - * - * (06/06/2001) gkh - * added evil hack that is needed for the prolific pl2303 device due to the - * crazy way its endpoints are set up. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_02_05 gkh - * Fixed buffer overflows bug with the generic serial driver. Thanks to - * Todd Squires for fixing this. - * - * (01/10/2001) gkh - * Fixed bug where the generic serial adaptor grabbed _any_ device that was - * offered to it. - * - * (12/12/2000) gkh - * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - * moved them to the serial_open and serial_close functions. - * Also fixed bug with there not being a MOD_DEC for the generic driver - * (thanks to Gary Brubaker for finding this.) - * - * (11/29/2000) gkh - * Small NULL pointer initialization cleanup which saves a bit of disk image - * - * (11/01/2000) Adam J. Richter - * instead of using idVendor/idProduct pairs, usb serial drivers - * now identify their hardware interest with usb_device_id tables, - * which they usually have anyhow for use with MODULE_DEVICE_TABLE. - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * Added locks for SMP safeness to generic driver - * Fixed the ability to open a generic device's port more than once. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * (07/03/2000) gkh - * Added more debugging to serial_ioctl call - * - * (06/25/2000) gkh - * Changed generic_write_bulk_callback to not call wake_up_interruptible - * directly, but to have port_softint do it at a safer time. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (05/22/2000) gkh - * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - * removed from the individual device source files. - * - * (05/03/2000) gkh - * Added the Digi Acceleport driver from Al Borchers and Peter Berger. - * - * (05/02/2000) gkh - * Changed devfs and tty register code to work properly now. This was based on - * the ACM driver changes by Vojtech Pavlik. - * - * (04/27/2000) Ryan VanderBijl - * Put calls to *_paranoia_checks into one function. - * - * (04/23/2000) gkh - * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - * Moved when the startup code printed out the devices that are supported. - * - * (04/19/2000) gkh - * Added driver for ZyXEL omni.net lcd plus ISDN TA - * Made startup info message specify which drivers were compiled in. - * - * (04/03/2000) gkh - * Changed the probe process to remove the module unload races. - * Changed where the tty layer gets initialized to have devfs work nicer. - * Added initial devfs support. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * - * (03/19/2000) gkh - * Fixed oops that could happen when device was removed while a program - * was talking to the device. - * Removed the static urbs and now all urbs are created and destroyed - * dynamically. - * Reworked the internal interface. Now everything is based on the - * usb_serial_port structure instead of the larger usb_serial structure. - * This fixes the bug that a multiport device could not have more than - * one port open at one time. - * - * (03/17/2000) gkh - * Added config option for debugging messages. - * Added patch for keyspan pda from Brian Warner. - * - * (03/06/2000) gkh - * Added the keyspan pda code from Brian Warner - * Moved a bunch of the port specific stuff into its own structure. This - * is in anticipation of the true multiport devices (there's a bug if you - * try to access more than one port of any multiport device right now) - * - * (02/21/2000) gkh - * Made it so that any serial devices only have to specify which functions - * they want to overload from the generic function calls (great, - * inheritance in C, in a driver, just what I wanted...) - * Added support for set_termios and ioctl function calls. No drivers take - * advantage of this yet. - * Removed the #ifdef MODULE, now there is no module specific code. - * Cleaned up a few comments in usb-serial.h that were wrong (thanks again - * to Miles Lott). - * Small fix to get_free_serial. - * - * (02/14/2000) gkh - * Removed the Belkin and Peracom functionality from the driver due to - * the lack of support from the vendor, and me not wanting people to - * accidenatly buy the device, expecting it to work with Linux. - * Added read_bulk_callback and write_bulk_callback to the type structure - * for the needs of the FTDI and WhiteHEAT driver. - * Changed all reverences to FTDI to FTDI_SIO at the request of Bill - * Ryder. - * Changed the output urb size back to the max endpoint size to make - * the ftdi_sio driver have it easier, and due to the fact that it didn't - * really increase the speed any. - * - * (02/11/2000) gkh - * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - * patch from Miles Lott (milos@insync.net). - * Fixed bug with not restoring the minor range that a device grabs, if - * the startup function fails (thanks Miles for finding this). - * - * (02/05/2000) gkh - * Added initial framework for the Keyspan PDA serial converter so that - * Brian Warner has a place to put his code. - * Made the ezusb specific functions generic enough that different - * devices can use them (whiteheat and keyspan_pda both need them). - * Split out a whole bunch of structure and other stuff to a separate - * usb-serial.h file. - * Made the Visor connection messages a little more understandable, now - * that Miles Lott (milos@insync.net) has gotten the Generic channel to - * work. Also made them always show up in the log file. - * - * (01/25/2000) gkh - * Added initial framework for FTDI serial converter so that Bill Ryder - * has a place to put his code. - * Added the vendor specific info from Handspring. Now we can print out - * informational debug messages as well as understand what is happening. - * - * (01/23/2000) gkh - * Fixed problem of crash when trying to open a port that didn't have a - * device assigned to it. Made the minor node finding a little smarter, - * now it looks to find a continuous space for the new device. - * - * (01/21/2000) gkh - * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - * Fixed get_serial_by_minor which was all messed up for multi port - * devices. Fixed multi port problem for generic devices. Now the number - * of ports is determined by the number of bulk out endpoints for the - * generic device. - * - * (01/19/2000) gkh - * Removed lots of cruft that was around from the old (pre urb) driver - * interface. - * Made the serial_table dynamic. This should save lots of memory when - * the number of minor nodes goes up to 256. - * Added initial support for devices that have more than one port. - * Added more debugging comments for the Visor, and added a needed - * set_configuration call. - * - * (01/17/2000) gkh - * Fixed the WhiteHEAT firmware (my processing tool had a bug) - * and added new debug loader firmware for it. - * Removed the put_char function as it isn't really needed. - * Added visor startup commands as found by the Win98 dump. - * - * (01/13/2000) gkh - * Fixed the vendor id for the generic driver to the one I meant it to be. - * - * (01/12/2000) gkh - * Forget the version numbering...that's pretty useless... - * Made the driver able to be compiled so that the user can select which - * converter they want to use. This allows people who only want the Visor - * support to not pay the memory size price of the WhiteHEAT. - * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - * grabbed the root hub. Not good. - * - * version 0.4.0 (01/10/2000) gkh - * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - * device. Added startup function to allow firmware to be downloaded to - * a device if it needs to be. - * Added firmware download logic to the WhiteHEAT device. - * Started to add #defines to split up the different drivers for potential - * configuration option. - * - * version 0.3.1 (12/30/99) gkh - * Fixed problems with urb for bulk out. - * Added initial support for multiple sets of endpoints. This enables - * the Handspring Visor to be attached successfully. Only the first - * bulk in / bulk out endpoint pair is being used right now. - * - * version 0.3.0 (12/27/99) gkh - * Added initial support for the Handspring Visor based on a patch from - * Miles Lott (milos@sneety.insync.net) - * Cleaned up the code a bunch and converted over to using urbs only. - * - * version 0.2.3 (12/21/99) gkh - * Added initial support for the Connect Tech WhiteHEAT converter. - * Incremented the number of ports in expectation of getting the - * WhiteHEAT to work properly (4 ports per connection). - * Added notification on insertion and removal of what port the - * device is/was connected to (and what kind of device it was). - * - * version 0.2.2 (12/16/99) gkh - * Changed major number to the new allocated number. We're legal now! - * - * version 0.2.1 (12/14/99) gkh - * Fixed bug that happens when device node is opened when there isn't a - * device attached to it. Thanks to marek@webdesign.no for noticing this. - * - * version 0.2.0 (11/10/99) gkh - * Split up internals to make it easier to add different types of serial - * converters to the code. - * Added a "generic" driver that gets it's vendor and product id - * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - * for the idea and sample code (from the usb scanner driver.) - * Cleared up any licensing questions by releasing it under the GNU GPL. - * - * version 0.1.2 (10/25/99) gkh - * Fixed bug in detecting device. - * - * version 0.1.1 (10/05/99) gkh - * Changed the major number to not conflict with anything else. - * - * version 0.1 (09/28/99) gkh - * Can recognize the two different devices and start up a read from - * device when asked to. Writes also work. No control signals yet, this - * all is vendor specific data (i.e. no spec), also no control for - * different baud rates or other bit settings. - * Currently we are using the same devid as the acm driver. This needs - * to change. - * */ #include diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 4ca5e0c0561..1cedc199950 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -1,53 +1,13 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 + * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (03/26/2002) gkh - * removed the port->tty check from port_paranoia_check() due to serial - * consoles not having a tty device assigned to them. - * - * (12/03/2001) gkh - * removed active from the port structure. - * added documentation to the usb_serial_device_type structure - * - * (10/10/2001) gkh - * added vendor and product to serial structure. Needed to determine device - * owner when the device is disconnected. - * - * (05/30/2001) gkh - * added sem to port structure and removed port_lock - * - * (10/05/2000) gkh - * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - * fix bug with urb->dev not being set properly, now that the usb core - * needs it. - * - * (09/11/2000) gkh - * Added usb_serial_debug_data function to help get rid of #DEBUG in the - * drivers. - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * - * (08/08/2000) gkh - * Added open_count to port structure. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 0ac0377e868..39ad0cab863 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Cli� devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include -- cgit v1.2.3-70-g09d2 From 269bda1c123c7caf88e1deb2264f9086f0344192 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/bus.c | 8 ++------ drivers/usb/serial/cp2101.c | 4 ++-- drivers/usb/serial/cyberjack.c | 4 ++-- drivers/usb/serial/cypress_m8.c | 8 ++++---- drivers/usb/serial/digi_acceleport.c | 12 ++++++------ drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/garmin_gps.c | 4 ++-- drivers/usb/serial/generic.c | 3 +-- drivers/usb/serial/hp4x.c | 4 ++-- drivers/usb/serial/io_tables.h | 12 ++++++------ drivers/usb/serial/io_ti.c | 12 ++++++------ drivers/usb/serial/ipaq.c | 3 ++- drivers/usb/serial/ipw.c | 4 ++-- drivers/usb/serial/ir-usb.c | 3 ++- drivers/usb/serial/keyspan.h | 16 ++++++++-------- drivers/usb/serial/keyspan_pda.c | 12 ++++++------ drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 3 ++- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/omninet.c | 4 ++-- drivers/usb/serial/option.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 10 ++++++---- drivers/usb/serial/usb-serial.c | 15 +++++++++------ drivers/usb/serial/usb-serial.h | 12 +++++------- drivers/usb/serial/visor.c | 18 +++++++++--------- drivers/usb/serial/whiteheat.c | 30 +++++++++++++++--------------- 31 files changed, 115 insertions(+), 114 deletions(-) (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index fbc5b9b4474..1f29d883732 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -33,8 +33,8 @@ static struct usb_driver airprime_driver = { static struct usb_serial_driver airprime_device = { .driver = { .owner = THIS_MODULE, + .name = "airprime", }, - .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 4878961a090..84bc0ee4f06 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -124,9 +124,9 @@ static struct usb_driver belkin_driver = { static struct usb_serial_driver belkin_device = { .driver = { .owner = THIS_MODULE, + .name = "belkin", }, - .name = "Belkin / Peracom / GoHubs USB Serial Adapter", - .short_name = "belkin", + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index b8364a8de7d..664139afcfa 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev) tty_register_device (usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", - driver->name, minor); + driver->description, minor); exit: return retval; @@ -104,7 +104,7 @@ exit: minor = port->number; tty_unregister_device (usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", - driver->name, minor); + driver->description, minor); return retval; } @@ -113,10 +113,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (driver->short_name) - driver->driver.name = (char *)driver->short_name; - else - driver->driver.name = (char *)driver->name; driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 81dd720a122..c5334dd89b1 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,7 @@ MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { .owner = THIS_MODULE, - .name = "CP2101", + .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -76,8 +76,8 @@ static struct usb_driver cp2101_driver = { static struct usb_serial_driver cp2101_device = { .driver = { .owner = THIS_MODULE, + .name = "cp2101", }, - .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3441bad74f7..e581e4ae848 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -86,9 +86,9 @@ static struct usb_driver cyberjack_driver = { static struct usb_serial_driver cyberjack_device = { .driver = { .owner = THIS_MODULE, + .name = "cyberjack", }, - .name = "Reiner SCT Cyberjack USB card reader", - .short_name = "cyberjack", + .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b4069af4d56..af9290ed257 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -179,9 +179,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { .driver = { .owner = THIS_MODULE, + .name = "earthmate", }, - .name = "DeLorme Earthmate USB", - .short_name = "earthmate", + .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -208,9 +208,9 @@ static struct usb_serial_driver cypress_earthmate_device = { static struct usb_serial_driver cypress_hidcom_device = { .driver = { .owner = THIS_MODULE, + .name = "cyphidcom", }, - .name = "HID->COM RS232 Adapter", - .short_name = "cyphidcom", + .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index be9b495d249..dc74644a603 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -505,10 +505,10 @@ static struct usb_driver digi_driver = { static struct usb_serial_driver digi_acceleport_2_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_2", }, - .name = "Digi 2 port USB adapter", - .short_name = "digi_2", + .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -534,10 +534,10 @@ static struct usb_serial_driver digi_acceleport_2_device = { static struct usb_serial_driver digi_acceleport_4_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_4", }, - .name = "Digi 4 port USB adapter", - .short_name = "digi_4", + .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 3e6c4ba7667..0b0546dcc7b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -115,8 +115,8 @@ static struct usb_driver empeg_driver = { static struct usb_serial_driver empeg_device = { .driver = { .owner = THIS_MODULE, + .name = "empeg", }, - .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9d945de0aca..77d54ac39a0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -565,9 +565,9 @@ static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { .owner = THIS_MODULE, + .name = "ftdi_sio", }, - .name = "FTDI USB Serial Device", - .short_name = "ftdi_sio", + .description = "FTDI USB Serial Device", .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3fd98c00cd6..35820bda7ae 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1472,9 +1472,9 @@ static void garmin_shutdown (struct usb_serial *serial) static struct usb_serial_driver garmin_device = { .driver = { .owner = THIS_MODULE, + .name = "garmin_gps", }, - .name = "Garmin GPS usb/tty", - .short_name = "garmin_gps", + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 779bea0c624..8909208f506 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,9 +39,8 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, + .name = "generic", }, - .name = "Generic", - .short_name = "generic", .id_table = generic_device_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 4f3cbc08c4e..8eadfb70560 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,7 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .owner = THIS_MODULE, - .name = "HP4X", + .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -47,8 +47,8 @@ static struct usb_driver hp49gp_driver = { static struct usb_serial_driver hp49gp_device = { .driver = { .owner = THIS_MODULE, + .name = "hp4X", }, - .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 28fb0d42a16..fad561c04c7 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_2", }, - .name = "Edgeport 2 port adapter", - .short_name = "edgeport_2", + .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -108,9 +108,9 @@ static struct usb_serial_driver edgeport_2port_device = { static struct usb_serial_driver edgeport_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_4", }, - .name = "Edgeport 4 port adapter", - .short_name = "edgeport_4", + .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -138,9 +138,9 @@ static struct usb_serial_driver edgeport_4port_device = { static struct usb_serial_driver edgeport_8port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_8", }, - .name = "Edgeport 8 port adapter", - .short_name = "edgeport_8", + .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 74228a07264..832b6d6734c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2984,10 +2984,10 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_1", }, - .name = "Edgeport TI 1 port adapter", - .short_name = "edgeport_ti_1", + .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3014,10 +3014,10 @@ static struct usb_serial_driver edgeport_1port_device = { static struct usb_serial_driver edgeport_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_2", }, - .name = "Edgeport TI 2 port adapter", - .short_name = "edgeport_ti_2", + .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9aedfb91b20..1abaebe6dbc 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -550,8 +550,9 @@ static struct usb_driver ipaq_driver = { static struct usb_serial_driver ipaq_device = { .driver = { .owner = THIS_MODULE, + .name = "ipaq", }, - .name = "PocketPC PDA", + .description = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2ba69623ac0..a02fada8536 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -446,9 +446,9 @@ static int ipw_disconnect(struct usb_serial_port *port) static struct usb_serial_driver ipw_device = { .driver = { .owner = THIS_MODULE, + .name = "ipw", }, - .name = "IPWireless converter", - .short_name = "ipw", + .description = "IPWireless converter", .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index bf079059819..19f329e9bdc 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -136,8 +136,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { .driver = { .owner = THIS_MODULE, + .name = "ir-usb", }, - .name = "IR Dongle", + .description = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 124d46e76a2..5cfc13b5e56 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -573,9 +573,9 @@ static struct usb_device_id keyspan_4port_ids[] = { static struct usb_serial_driver keyspan_pre_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_no_firm", }, - .name = "Keyspan - (without firmware)", - .short_name = "keyspan_no_firm", + .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -587,9 +587,9 @@ static struct usb_serial_driver keyspan_pre_device = { static struct usb_serial_driver keyspan_1port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_1", }, - .name = "Keyspan 1 port adapter", - .short_name = "keyspan_1", + .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -614,9 +614,9 @@ static struct usb_serial_driver keyspan_1port_device = { static struct usb_serial_driver keyspan_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_2", }, - .name = "Keyspan 2 port adapter", - .short_name = "keyspan_2", + .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -641,9 +641,9 @@ static struct usb_serial_driver keyspan_2port_device = { static struct usb_serial_driver keyspan_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_4", }, - .name = "Keyspan 4 port adapter", - .short_name = "keyspan_4", + .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 389b7833e3a..cd4f48bd83b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -786,9 +786,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) static struct usb_serial_driver keyspan_pda_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda_pre", }, - .name = "Keyspan PDA - (prerenumeration)", - .short_name = "keyspan_pda_pre", + .description = "Keyspan PDA - (prerenumeration)", .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -802,9 +802,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { static struct usb_serial_driver xircom_pgs_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "xircom_no_firm", }, - .name = "Xircom / Entregra PGS - (prerenumeration)", - .short_name = "xircom_no_firm", + .description = "Xircom / Entregra PGS - (prerenumeration)", .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -817,9 +817,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { static struct usb_serial_driver keyspan_pda_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda", }, - .name = "Keyspan PDA", - .short_name = "keyspan_pda", + .description = "Keyspan PDA", .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 586108ce789..a8951c0fd02 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -126,9 +126,9 @@ static struct usb_driver kl5kusb105d_driver = { static struct usb_serial_driver kl5kusb105d_device = { .driver = { .owner = THIS_MODULE, + .name = "kl5kusb105d", }, - .name = "KL5KUSB105D / PalmConnect", - .short_name = "kl5kusb105d", + .description = "KL5KUSB105D / PalmConnect", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index a9578e05b22..9456dd9dd13 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -108,8 +108,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { .driver = { .owner = THIS_MODULE, + .name = "kobil", }, - .name = "KOBIL USB smart card terminal", + .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 7dcf91c5f83..ca5dbadb9b7 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -135,9 +135,9 @@ static struct usb_driver mct_u232_driver = { static struct usb_serial_driver mct_u232_device = { .driver = { .owner = THIS_MODULE, + .name = "mct_u232", }, - .name = "MCT U232", - .short_name = "mct_u232", + .description = "MCT U232", .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6327cc1b2e..3caf97072ac 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -91,9 +91,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { .driver = { .owner = THIS_MODULE, + .name = "omninet", }, - .name = "ZyXEL - omni.net lcd plus usb", - .short_name = "omninet", + .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a2b5adf3486..7716000045b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -108,9 +108,9 @@ static struct usb_driver option_driver = { static struct usb_serial_driver option_3port_device = { .driver = { .owner = THIS_MODULE, + .name = "option", }, - .name = "Option 3G data card", - .short_name = "option", + .description = "Option 3G data card", .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 29719ceab19..f8f4e93e8c0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -157,8 +157,8 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, static struct usb_serial_driver pl2303_device = { .driver = { .owner = THIS_MODULE, + .name = "pl2303", }, - .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 42a86ab689f..c22bdc0c4df 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -400,8 +400,8 @@ static int safe_startup (struct usb_serial *serial) static struct usb_serial_driver safe_device = { .driver = { .owner = THIS_MODULE, + .name = "safe_serial", }, - .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index eab8a6de092..205dbf7201d 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -257,9 +257,10 @@ static struct usb_driver ti_usb_driver = { static struct usb_serial_driver ti_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", }, - .name = "TI USB 3410 1 port adapter", + .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -286,9 +287,10 @@ static struct usb_serial_driver ti_1port_device = { static struct usb_serial_driver ti_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", }, - .name = "TI USB 5052 2 port adapter", + .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index fde09fba879..13f6592be68 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -122,7 +122,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg ("%s - %s", __FUNCTION__, serial->type->name); + dbg("%s - %s", __FUNCTION__, serial->type->description); serial->type->shutdown(serial); @@ -415,7 +415,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, "%d:", i); if (serial->type->driver.owner) length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->name); + length += sprintf (page+length, " name:\"%s\"", serial->type->description); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); @@ -687,7 +687,7 @@ int usb_serial_probe(struct usb_interface *interface, #endif /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", type->name); + dev_info(&interface->dev, "%s converter detected\n", type->description); #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { @@ -1088,16 +1088,19 @@ int usb_serial_register(struct usb_serial_driver *driver) fixup_generic(driver); + if (!driver->description) + driver->description = driver->driver.name; + /* Add this device to our list of devices */ list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, driver->name); + err("problem %d when registering driver %s", retval, driver->description); list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", driver->name); + info("USB Serial support registered for %s", driver->description); return retval; } @@ -1105,7 +1108,7 @@ int usb_serial_register(struct usb_serial_driver *driver) void usb_serial_deregister(struct usb_serial_driver *device) { - info("USB Serial deregistering driver %s", device->name); + info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 1cedc199950..238a5a871ed 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -149,11 +149,8 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @name: pointer to a string that describes this driver. This string used + * @description: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this driver in - * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface - * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_interrupt_in: the number of interrupt in endpoints this device will @@ -187,11 +184,12 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. - * + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Useing the module name is a good idea.) */ struct usb_serial_driver { - char *name; - char *short_name; + const char *description; const struct usb_device_id *id_table; char num_interrupt_in; char num_interrupt_out; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 39ad0cab863..baa2acb28bd 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -185,9 +185,9 @@ static struct usb_driver visor_driver = { static struct usb_serial_driver handspring_device = { .driver = { .owner = THIS_MODULE, + .name = "visor", }, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -215,9 +215,9 @@ static struct usb_serial_driver handspring_device = { static struct usb_serial_driver clie_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_5", }, - .name = "Sony Clie 5.0", - .short_name = "clie_5", + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -245,9 +245,9 @@ static struct usb_serial_driver clie_5_device = { static struct usb_serial_driver clie_3_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_3.5", }, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -659,7 +659,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -668,11 +668,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index fb95a34a1cf..18c3183be76 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -159,9 +159,9 @@ static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheatnofirm", }, - .name = "Connect Tech - WhiteHEAT - (prerenumeration)", - .short_name = "whiteheatnofirm", + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -174,9 +174,9 @@ static struct usb_serial_driver whiteheat_fake_device = { static struct usb_serial_driver whiteheat_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheat", }, - .name = "Connect Tech - WhiteHEAT", - .short_name = "whiteheat", + .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -386,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->name, ret); + err("%s: Couldn't send command [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(command)) { - err("%s: Send command incomplete [%d]", serial->type->name, alen); + err("%s: Send command incomplete [%d]", serial->type->description, alen); goto no_firmware; } @@ -398,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->name, ret); + err("%s: Couldn't get results [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(result)) { - err("%s: Get results incomplete [%d]", serial->type->name, alen); + err("%s: Get results incomplete [%d]", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->name, result[0]); + err("%s: Command failed [%d]", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, + info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { @@ -418,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial) info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_private; } @@ -488,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial) command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_command_private; } @@ -505,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); - err("%s: please contact support@connecttech.com\n", serial->type->name); + err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); + err("%s: please contact support@connecttech.com\n", serial->type->description); return -ENODEV; no_command_private: -- cgit v1.2.3-70-g09d2 From 17a882fc0c91477b2582a6dfd4ca93ae7eb58cd3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: remove driver version from a few drivers These numbers are pointless, as they have not been changed in _years_, so we should just remove them to stop pretending there is an actual "version number" for these drivers. This should also help reduce confusion when people try to ask for support of a specific driver version, as there has been no way to tell what they are talking about. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 4 +--- drivers/usb/serial/usb-serial.c | 6 ++---- drivers/usb/serial/visor.c | 3 +-- 3 files changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f8f4e93e8c0..165c119bf10 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -34,7 +34,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" static int debug; @@ -1176,7 +1175,7 @@ static int __init pl2303_init (void) retval = usb_register(&pl2303_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: usb_serial_deregister(&pl2303_device); @@ -1196,7 +1195,6 @@ module_init(pl2303_init); module_exit(pl2303_exit); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 13f6592be68..0c4881d18cd 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -37,7 +37,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" @@ -406,7 +405,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __FUNCTION__); - length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); + length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) @@ -1025,7 +1024,7 @@ static int __init usb_serial_init(void) goto exit_generic; } - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return result; @@ -1127,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint); /* Module information */ MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index baa2acb28bd..a473c1c3455 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -32,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -1002,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: -- cgit v1.2.3-70-g09d2