From c9c7746dd333c12f482af2f1e63ea7eafc7cd529 Mon Sep 17 00:00:00 2001 From: Rui Santos Date: Fri, 23 Sep 2005 20:06:50 +0100 Subject: [PATCH] USB: ftdi: Artemis and ATIK based USB astronomical CCD cameras This patch enables direct kernel support for the Artemis and ATIK astronomical based USB CCD cameras. Since all communications with this camera are done via an FTDI 245BM chip, it was only needed to specify the ProductID and VendorID of all three devices. In what tests are concerned, data was transfered from and to the FTDI at the chips Top speed (360KB/s). Signed-off-by: Rui Santos Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5a8631c8a4a..8c12a0acf10 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -471,6 +471,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 2c35d74cc6d..7c65d46c759 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -198,6 +198,19 @@ /* an infrared receiver for user access control with IR tags */ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */ + /* * Protego product ids */ -- cgit v1.2.3-70-g09d2 From 207c47e1fbc8d51500997bfa67c26c00114fab04 Mon Sep 17 00:00:00 2001 From: Thomas Riewe Date: Thu, 29 Sep 2005 14:57:29 +0200 Subject: [PATCH] drivers/usb/serial/ftdi_sio: add PID/VID We would like to add a PID for the Pyramid Appliance Display, which works on USB via FTDI_SIO. Signed-off-by: Thomas Riewe Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8c12a0acf10..b713113c165 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -411,6 +411,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 7c65d46c759..ddb63df31ce 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -342,6 +342,9 @@ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3-70-g09d2 From 521daed8db4443a1574a98fc3abae8e230f09eaa Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 17:15:33 -0700 Subject: [PATCH] safe_serial: use preprocessor directive for error Use valid #preprocessor instruction to generate an error. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- drivers/usb/serial/safe_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 96a17568cbf..88bf14abfa7 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC); MODULE_LICENSE("GPL"); #if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT) -#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" +#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT" #endif #if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) -- cgit v1.2.3-70-g09d2 From ea65370d025f5005649e5cb37c4d025e92c6fc38 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: rename usb_serial_device_type to usb_serial_driver I'm tired of trying to explain why a "device_type" is really a driver. This better describes exactly what this structure is. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 2 +- drivers/usb/serial/bus.c | 28 ++++++++++++++-------------- drivers/usb/serial/cp2101.c | 2 +- drivers/usb/serial/cyberjack.c | 2 +- drivers/usb/serial/cypress_m8.c | 4 ++-- drivers/usb/serial/digi_acceleport.c | 4 ++-- drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/garmin_gps.c | 7 +------ drivers/usb/serial/generic.c | 2 +- drivers/usb/serial/hp4x.c | 2 +- drivers/usb/serial/io_tables.h | 6 +++--- drivers/usb/serial/io_ti.c | 4 ++-- drivers/usb/serial/ipaq.c | 2 +- drivers/usb/serial/ipw.c | 2 +- drivers/usb/serial/ir-usb.c | 2 +- drivers/usb/serial/keyspan.h | 8 ++++---- drivers/usb/serial/keyspan_pda.c | 6 +++--- drivers/usb/serial/kl5kusb105.c | 2 +- drivers/usb/serial/kobil_sct.c | 2 +- drivers/usb/serial/mct_u232.c | 2 +- drivers/usb/serial/omninet.c | 2 +- drivers/usb/serial/option.c | 2 +- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 4 ++-- drivers/usb/serial/usb-serial.c | 30 +++++++++++++++--------------- drivers/usb/serial/usb-serial.h | 28 ++++++++++++++-------------- drivers/usb/serial/visor.c | 6 +++--- drivers/usb/serial/whiteheat.c | 4 ++-- 31 files changed, 85 insertions(+), 90 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 926d4c2c160..104c04385bb 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -30,7 +30,7 @@ static struct usb_driver airprime_driver = { .id_table = id_table, }; -static struct usb_serial_device_type airprime_device = { +static struct usb_serial_driver airprime_device = { .owner = THIS_MODULE, .name = "airprime", .id_table = id_table, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index abb1b2c543b..6d84de40cb7 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -121,7 +121,7 @@ static struct usb_driver belkin_driver = { }; /* All of the device info needed for the serial converters */ -static struct usb_serial_device_type belkin_device = { +static struct usb_serial_driver belkin_device = { .owner = THIS_MODULE, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 2f612c2d894..5a0bcd34bb6 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -18,7 +18,7 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *drv) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; const struct usb_serial_port *port; /* @@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = { static int usb_serial_device_probe (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -80,7 +80,7 @@ exit: static int usb_serial_device_remove (struct device *dev) { - struct usb_serial_device_type *driver; + struct usb_serial_driver *driver; struct usb_serial_port *port; int retval = 0; int minor; @@ -109,26 +109,26 @@ exit: return retval; } -int usb_serial_bus_register(struct usb_serial_device_type *device) +int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (device->short_name) - device->driver.name = (char *)device->short_name; + if (driver->short_name) + driver->driver.name = (char *)driver->short_name; else - device->driver.name = (char *)device->name; - device->driver.bus = &usb_serial_bus_type; - device->driver.probe = usb_serial_device_probe; - device->driver.remove = usb_serial_device_remove; - device->driver.owner = device->owner; + driver->driver.name = (char *)driver->name; + driver->driver.bus = &usb_serial_bus_type; + driver->driver.probe = usb_serial_device_probe; + driver->driver.remove = usb_serial_device_remove; + driver->driver.owner = driver->owner; - retval = driver_register(&device->driver); + retval = driver_register(&driver->driver); return retval; } -void usb_serial_bus_deregister(struct usb_serial_device_type *device) +void usb_serial_bus_deregister(struct usb_serial_driver *driver) { - driver_unregister (&device->driver); + driver_unregister(&driver->driver); } diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 97c78c21e8d..0b45b58bef5 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -73,7 +73,7 @@ static struct usb_driver cp2101_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cp2101_device = { +static struct usb_serial_driver cp2101_device = { .owner = THIS_MODULE, .name = "CP2101", .id_table = id_table, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index b5b431067b0..9f421a3c47e 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -83,7 +83,7 @@ static struct usb_driver cyberjack_driver = { .id_table = id_table, }; -static struct usb_serial_device_type cyberjack_device = { +static struct usb_serial_driver cyberjack_device = { .owner = THIS_MODULE, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 9ee1aaff2fc..4fb8e59d152 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -176,7 +176,7 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count); -static struct usb_serial_device_type cypress_earthmate_device = { +static struct usb_serial_driver cypress_earthmate_device = { .owner = THIS_MODULE, .name = "DeLorme Earthmate USB", .short_name = "earthmate", @@ -203,7 +203,7 @@ static struct usb_serial_device_type cypress_earthmate_device = { .write_int_callback = cypress_write_int_callback, }; -static struct usb_serial_device_type cypress_hidcom_device = { +static struct usb_serial_driver cypress_hidcom_device = { .owner = THIS_MODULE, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index a19a47f6cf1..66feb88b431 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -503,7 +503,7 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ -static struct usb_serial_device_type digi_acceleport_2_device = { +static struct usb_serial_driver digi_acceleport_2_device = { .owner = THIS_MODULE, .name = "Digi 2 port USB adapter", .short_name = "digi_2", @@ -530,7 +530,7 @@ static struct usb_serial_device_type digi_acceleport_2_device = { .shutdown = digi_shutdown, }; -static struct usb_serial_device_type digi_acceleport_4_device = { +static struct usb_serial_driver digi_acceleport_4_device = { .owner = THIS_MODULE, .name = "Digi 4 port USB adapter", .short_name = "digi_4", diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8d562ab454a..cbea8b38b60 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -112,7 +112,7 @@ static struct usb_driver empeg_driver = { .id_table = id_table, }; -static struct usb_serial_device_type empeg_device = { +static struct usb_serial_driver empeg_device = { .owner = THIS_MODULE, .name = "Empeg", .id_table = id_table, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b713113c165..529e1a7ccfa 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -562,7 +562,7 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud); static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); -static struct usb_serial_device_type ftdi_sio_device = { +static struct usb_serial_driver ftdi_sio_device = { .owner = THIS_MODULE, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 2ef614d5c8f..7361194f1d6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1468,13 +1468,8 @@ static void garmin_shutdown (struct usb_serial *serial) } - - - - - /* All of the device info needed */ -static struct usb_serial_device_type garmin_device = { +static struct usb_serial_driver garmin_device = { .owner = THIS_MODULE, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 5f7d3193d35..7f567bf9654 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -36,7 +36,7 @@ MODULE_PARM_DESC(product, "User specified USB idProduct"); static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ -struct usb_serial_device_type usb_serial_generic_device = { +struct usb_serial_driver usb_serial_generic_device = { .owner = THIS_MODULE, .name = "Generic", .short_name = "generic", diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 64d55fbd206..b49469907a8 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -44,7 +44,7 @@ static struct usb_driver hp49gp_driver = { .id_table = id_table, }; -static struct usb_serial_device_type hp49gp_device = { +static struct usb_serial_driver hp49gp_device = { .owner = THIS_MODULE, .name = "HP4X", .id_table = id_table, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index e7ffe02408b..7314c04727f 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -75,7 +75,7 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", @@ -103,7 +103,7 @@ static struct usb_serial_device_type edgeport_2port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_4port_device = { +static struct usb_serial_driver edgeport_4port_device = { .owner = THIS_MODULE, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", @@ -131,7 +131,7 @@ static struct usb_serial_device_type edgeport_4port_device = { .write_bulk_callback = edge_bulk_out_data_callback, }; -static struct usb_serial_device_type edgeport_8port_device = { +static struct usb_serial_driver edgeport_8port_device = { .owner = THIS_MODULE, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index ebf9967f7c8..4328cc702ef 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2982,7 +2982,7 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, } -static struct usb_serial_device_type edgeport_1port_device = { +static struct usb_serial_driver edgeport_1port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", @@ -3010,7 +3010,7 @@ static struct usb_serial_device_type edgeport_1port_device = { .write_bulk_callback = edge_bulk_out_callback, }; -static struct usb_serial_device_type edgeport_2port_device = { +static struct usb_serial_driver edgeport_2port_device = { .owner = THIS_MODULE, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index c05c2a2a0f3..9a79ad8d7a5 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -547,7 +547,7 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ -static struct usb_serial_device_type ipaq_device = { +static struct usb_serial_driver ipaq_device = { .owner = THIS_MODULE, .name = "PocketPC PDA", .id_table = ipaq_id_table, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 85e242459c2..04524d34de3 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -443,7 +443,7 @@ static int ipw_disconnect(struct usb_serial_port *port) return 0; } -static struct usb_serial_device_type ipw_device = { +static struct usb_serial_driver ipw_device = { .owner = THIS_MODULE, .name = "IPWireless converter", .short_name = "ipw", diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 937b2fdd717..ecfb2060ea0 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -133,7 +133,7 @@ static struct usb_driver ir_driver = { }; -static struct usb_serial_device_type ir_device = { +static struct usb_serial_driver ir_device = { .owner = THIS_MODULE, .name = "IR Dongle", .id_table = id_table, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index e9b45b768ac..97e7d9e53e3 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -570,7 +570,7 @@ static struct usb_device_id keyspan_4port_ids[] = { }; /* Structs for the devices, pre and post renumeration. */ -static struct usb_serial_device_type keyspan_pre_device = { +static struct usb_serial_driver keyspan_pre_device = { .owner = THIS_MODULE, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", @@ -582,7 +582,7 @@ static struct usb_serial_device_type keyspan_pre_device = { .attach = keyspan_fake_startup, }; -static struct usb_serial_device_type keyspan_1port_device = { +static struct usb_serial_driver keyspan_1port_device = { .owner = THIS_MODULE, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", @@ -607,7 +607,7 @@ static struct usb_serial_device_type keyspan_1port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_2port_device = { +static struct usb_serial_driver keyspan_2port_device = { .owner = THIS_MODULE, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", @@ -632,7 +632,7 @@ static struct usb_serial_device_type keyspan_2port_device = { .shutdown = keyspan_shutdown, }; -static struct usb_serial_device_type keyspan_4port_device = { +static struct usb_serial_driver keyspan_4port_device = { .owner = THIS_MODULE, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 635c384cb15..8fad0e963dd 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -783,7 +783,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) } #ifdef KEYSPAN -static struct usb_serial_device_type keyspan_pda_fake_device = { +static struct usb_serial_driver keyspan_pda_fake_device = { .owner = THIS_MODULE, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", @@ -797,7 +797,7 @@ static struct usb_serial_device_type keyspan_pda_fake_device = { #endif #ifdef XIRCOM -static struct usb_serial_device_type xircom_pgs_fake_device = { +static struct usb_serial_driver xircom_pgs_fake_device = { .owner = THIS_MODULE, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", @@ -810,7 +810,7 @@ static struct usb_serial_device_type xircom_pgs_fake_device = { }; #endif -static struct usb_serial_device_type keyspan_pda_device = { +static struct usb_serial_driver keyspan_pda_device = { .owner = THIS_MODULE, .name = "Keyspan PDA", .short_name = "keyspan_pda", diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a11e829e38c..be082706b95 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -123,7 +123,7 @@ static struct usb_driver kl5kusb105d_driver = { .id_table = id_table, }; -static struct usb_serial_device_type kl5kusb105d_device = { +static struct usb_serial_driver kl5kusb105d_device = { .owner = THIS_MODULE, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index fe4c98a7517..94944340bb8 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -105,7 +105,7 @@ static struct usb_driver kobil_driver = { }; -static struct usb_serial_device_type kobil_device = { +static struct usb_serial_driver kobil_device = { .owner = THIS_MODULE, .name = "KOBIL USB smart card terminal", .id_table = id_table, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 50b6369647d..9470964316a 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -132,7 +132,7 @@ static struct usb_driver mct_u232_driver = { .id_table = id_table_combined, }; -static struct usb_serial_device_type mct_u232_device = { +static struct usb_serial_driver mct_u232_device = { .owner = THIS_MODULE, .name = "MCT U232", .short_name = "mct_u232", diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 6a99ae192df..53c0588877c 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -88,7 +88,7 @@ static struct usb_driver omninet_driver = { }; -static struct usb_serial_device_type zyxel_omninet_device = { +static struct usb_serial_driver zyxel_omninet_device = { .owner = THIS_MODULE, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4989e5740d1..6ec9266e2e9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -105,7 +105,7 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, wich the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_device_type option_3port_device = { +static struct usb_serial_driver option_3port_device = { .owner = THIS_MODULE, .name = "Option 3G data card", .short_name = "option", diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3cf245bdda5..7134648e078 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -175,7 +175,7 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ -static struct usb_serial_device_type pl2303_device = { +static struct usb_serial_driver pl2303_device = { .owner = THIS_MODULE, .name = "PL-2303", .id_table = id_table, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 88bf14abfa7..87871bb647d 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -397,7 +397,7 @@ static int safe_startup (struct usb_serial *serial) return 0; } -static struct usb_serial_device_type safe_device = { +static struct usb_serial_driver safe_device = { .owner = THIS_MODULE, .name = "Safe", .id_table = id_table, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 59c88de3e7a..f2efaf6f3d7 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -255,7 +255,7 @@ static struct usb_driver ti_usb_driver = { .id_table = ti_id_table_combined, }; -static struct usb_serial_device_type ti_1port_device = { +static struct usb_serial_driver ti_1port_device = { .owner = THIS_MODULE, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, @@ -282,7 +282,7 @@ static struct usb_serial_device_type ti_1port_device = { .write_bulk_callback = ti_bulk_out_callback, }; -static struct usb_serial_device_type ti_2port_device = { +static struct usb_serial_driver ti_2port_device = { .owner = THIS_MODULE, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index e77fbdfc782..cf083da15eb 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -823,7 +823,7 @@ static void port_release(struct device *dev) static struct usb_serial * create_serial (struct usb_device *dev, struct usb_interface *interface, - struct usb_serial_device_type *type) + struct usb_serial_driver *driver) { struct usb_serial *serial; @@ -834,22 +834,22 @@ static struct usb_serial * create_serial (struct usb_device *dev, } memset (serial, 0, sizeof(*serial)); serial->dev = usb_get_dev(dev); - serial->type = type; + serial->type = driver; serial->interface = interface; kref_init(&serial->kref); return serial; } -static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface) +static struct usb_serial_driver *search_serial_device(struct usb_interface *iface) { struct list_head *p; const struct usb_device_id *id; - struct usb_serial_device_type *t; + struct usb_serial_driver *t; /* List trough know devices and see if the usb id matches */ list_for_each(p, &usb_serial_driver_list) { - t = list_entry(p, struct usb_serial_device_type, driver_list); + t = list_entry(p, struct usb_serial_driver, driver_list); id = usb_match_id(iface, t->id_table); if (id != NULL) { dbg("descriptor matches"); @@ -872,7 +872,7 @@ int usb_serial_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; - struct usb_serial_device_type *type = NULL; + struct usb_serial_driver *type = NULL; int retval; int minor; int buffer_size; @@ -1375,7 +1375,7 @@ module_exit(usb_serial_exit); } \ } while (0) -static void fixup_generic(struct usb_serial_device_type *device) +static void fixup_generic(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1387,28 +1387,28 @@ static void fixup_generic(struct usb_serial_device_type *device) set_to_generic_if_null(device, shutdown); } -int usb_serial_register(struct usb_serial_device_type *new_device) +int usb_serial_register(struct usb_serial_driver *driver) { int retval; - fixup_generic(new_device); + fixup_generic(driver); /* Add this device to our list of devices */ - list_add(&new_device->driver_list, &usb_serial_driver_list); + list_add(&driver->driver_list, &usb_serial_driver_list); - retval = usb_serial_bus_register(new_device); + retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, new_device->name); - list_del(&new_device->driver_list); + err("problem %d when registering driver %s", retval, driver->name); + list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", new_device->name); + info("USB Serial support registered for %s", driver->name); return retval; } -void usb_serial_deregister(struct usb_serial_device_type *device) +void usb_serial_deregister(struct usb_serial_driver *device) { info("USB Serial deregistering driver %s", device->name); list_del(&device->driver_list); diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 57f92f054c7..d6738b1b042 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -143,7 +143,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device - * @type: pointer to the struct usb_serial_device_type for this device + * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @minor: the starting minor number for this device * @num_ports: the number of ports this device has @@ -159,7 +159,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void */ struct usb_serial { struct usb_device * dev; - struct usb_serial_device_type * type; + struct usb_serial_driver * type; struct usb_interface * interface; unsigned char minor; unsigned char num_ports; @@ -188,11 +188,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) } /** - * usb_serial_device_type - a structure that defines a usb serial device - * @owner: pointer to the module that owns this device. - * @name: pointer to a string that describes this device. This string used + * usb_serial_driver - describes a usb serial driver + * @owner: pointer to the module that owns this driver. + * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this device in + * @short_name: a pointer to a string that describes this driver in * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all @@ -221,13 +221,13 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * @shutdown: pointer to the driver's shutdown function. This will be * called when the device is removed from the system. * - * This structure is defines a USB Serial device. It provides all of + * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. */ -struct usb_serial_device_type { +struct usb_serial_driver { struct module *owner; char *name; char *short_name; @@ -269,10 +269,10 @@ struct usb_serial_device_type { void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs); void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs); }; -#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver) +#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) -extern int usb_serial_register(struct usb_serial_device_type *new_device); -extern void usb_serial_deregister(struct usb_serial_device_type *device); +extern int usb_serial_register(struct usb_serial_driver *driver); +extern void usb_serial_deregister(struct usb_serial_driver *driver); extern void usb_serial_port_softint(void *private); extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); @@ -303,10 +303,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial); extern int usb_serial_generic_register (int debug); extern void usb_serial_generic_deregister (void); -extern int usb_serial_bus_register (struct usb_serial_device_type *device); -extern void usb_serial_bus_deregister (struct usb_serial_device_type *device); +extern int usb_serial_bus_register (struct usb_serial_driver *device); +extern void usb_serial_bus_deregister (struct usb_serial_driver *device); -extern struct usb_serial_device_type usb_serial_generic_device; +extern struct usb_serial_driver usb_serial_generic_device; extern struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 31c57adcb62..825451b3788 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -311,7 +311,7 @@ static struct usb_driver visor_driver = { }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ -static struct usb_serial_device_type handspring_device = { +static struct usb_serial_driver handspring_device = { .owner = THIS_MODULE, .name = "Handspring Visor / Palm OS", .short_name = "visor", @@ -339,7 +339,7 @@ static struct usb_serial_device_type handspring_device = { }; /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ -static struct usb_serial_device_type clie_5_device = { +static struct usb_serial_driver clie_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 5.0", .short_name = "clie_5", @@ -367,7 +367,7 @@ static struct usb_serial_device_type clie_5_device = { }; /* device info for the Sony Clie OS version 3.5 */ -static struct usb_serial_device_type clie_3_5_device = { +static struct usb_serial_driver clie_3_5_device = { .owner = THIS_MODULE, .name = "Sony Clie 3.5", .short_name = "clie_3.5", diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cf3bc30675a..dc06664bfa0 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -156,7 +156,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port); static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); -static struct usb_serial_device_type whiteheat_fake_device = { +static struct usb_serial_driver whiteheat_fake_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", @@ -169,7 +169,7 @@ static struct usb_serial_device_type whiteheat_fake_device = { .attach = whiteheat_firmware_attach, }; -static struct usb_serial_device_type whiteheat_device = { +static struct usb_serial_driver whiteheat_device = { .owner = THIS_MODULE, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", -- cgit v1.2.3-70-g09d2 From 18fcac353fdc7cd072b0d24c8667042e675a4c11 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 4 +++- drivers/usb/serial/belkin_sa.c | 4 +++- drivers/usb/serial/bus.c | 9 ++++----- drivers/usb/serial/cp2101.c | 4 +++- drivers/usb/serial/cyberjack.c | 4 +++- drivers/usb/serial/cypress_m8.c | 8 ++++++-- drivers/usb/serial/digi_acceleport.c | 8 ++++++-- drivers/usb/serial/empeg.c | 4 +++- drivers/usb/serial/ftdi_sio.c | 4 +++- drivers/usb/serial/garmin_gps.c | 4 +++- drivers/usb/serial/generic.c | 4 +++- drivers/usb/serial/hp4x.c | 4 +++- drivers/usb/serial/io_tables.h | 12 +++++++++--- drivers/usb/serial/io_ti.c | 8 ++++++-- drivers/usb/serial/ipaq.c | 4 +++- drivers/usb/serial/ipw.c | 4 +++- drivers/usb/serial/ir-usb.c | 4 +++- drivers/usb/serial/keyspan.h | 16 ++++++++++++---- drivers/usb/serial/keyspan_pda.c | 12 +++++++++--- drivers/usb/serial/kl5kusb105.c | 4 +++- drivers/usb/serial/kobil_sct.c | 4 +++- drivers/usb/serial/mct_u232.c | 4 +++- drivers/usb/serial/omninet.c | 4 +++- drivers/usb/serial/option.c | 4 +++- drivers/usb/serial/pl2303.c | 4 +++- drivers/usb/serial/safe_serial.c | 4 +++- drivers/usb/serial/ti_usb_3410_5052.c | 8 ++++++-- drivers/usb/serial/usb-serial.c | 22 +++++++++++----------- drivers/usb/serial/usb-serial.h | 5 +++-- drivers/usb/serial/visor.c | 12 +++++++++--- drivers/usb/serial/whiteheat.c | 8 ++++++-- 31 files changed, 144 insertions(+), 60 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 104c04385bb..fbc5b9b4474 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -31,7 +31,9 @@ static struct usb_driver airprime_driver = { }; static struct usb_serial_driver airprime_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 6d84de40cb7..4878961a090 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -122,7 +122,9 @@ static struct usb_driver belkin_driver = { /* All of the device info needed for the serial converters */ static struct usb_serial_driver belkin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Belkin / Peracom / GoHubs USB Serial Adapter", .short_name = "belkin", .id_table = id_table_combined, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 5a0bcd34bb6..b8364a8de7d 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev) driver = port->serial->type; if (driver->port_probe) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_probe (port); - module_put(driver->owner); + module_put(driver->driver.owner); if (retval) goto exit; } @@ -92,13 +92,13 @@ static int usb_serial_device_remove (struct device *dev) driver = port->serial->type; if (driver->port_remove) { - if (!try_module_get(driver->owner)) { + if (!try_module_get(driver->driver.owner)) { dev_err(dev, "module get failed, exiting\n"); retval = -EIO; goto exit; } retval = driver->port_remove (port); - module_put(driver->owner); + module_put(driver->driver.owner); } exit: minor = port->number; @@ -120,7 +120,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; - driver->driver.owner = driver->owner; retval = driver_register(&driver->driver); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 0b45b58bef5..81dd720a122 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -74,7 +74,9 @@ static struct usb_driver cp2101_driver = { }; static struct usb_serial_driver cp2101_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 9f421a3c47e..3441bad74f7 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -84,7 +84,9 @@ static struct usb_driver cyberjack_driver = { }; static struct usb_serial_driver cyberjack_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Reiner SCT Cyberjack USB card reader", .short_name = "cyberjack", .id_table = id_table, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 4fb8e59d152..b4069af4d56 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -177,7 +177,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "DeLorme Earthmate USB", .short_name = "earthmate", .id_table = id_table_earthmate, @@ -204,7 +206,9 @@ static struct usb_serial_driver cypress_earthmate_device = { }; static struct usb_serial_driver cypress_hidcom_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HID->COM RS232 Adapter", .short_name = "cyphidcom", .id_table = id_table_cyphidcomrs232, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 66feb88b431..be9b495d249 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -504,7 +504,9 @@ static struct usb_driver digi_driver = { /* device info needed for the Digi serial converter */ static struct usb_serial_driver digi_acceleport_2_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 2 port USB adapter", .short_name = "digi_2", .id_table = id_table_2, @@ -531,7 +533,9 @@ static struct usb_serial_driver digi_acceleport_2_device = { }; static struct usb_serial_driver digi_acceleport_4_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Digi 4 port USB adapter", .short_name = "digi_4", .id_table = id_table_4, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index cbea8b38b60..3e6c4ba7667 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -113,7 +113,9 @@ static struct usb_driver empeg_driver = { }; static struct usb_serial_driver empeg_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 529e1a7ccfa..9d945de0aca 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -563,7 +563,9 @@ static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "FTDI USB Serial Device", .short_name = "ftdi_sio", .id_table = id_table_combined, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 7361194f1d6..3fd98c00cd6 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1470,7 +1470,9 @@ static void garmin_shutdown (struct usb_serial *serial) /* All of the device info needed */ static struct usb_serial_driver garmin_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Garmin GPS usb/tty", .short_name = "garmin_gps", .id_table = id_table, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 7f567bf9654..779bea0c624 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -37,7 +37,9 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ /* All of the device info needed for the Generic Serial Converter */ struct usb_serial_driver usb_serial_generic_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Generic", .short_name = "generic", .id_table = generic_device_ids, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index b49469907a8..4f3cbc08c4e 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -45,7 +45,9 @@ static struct usb_driver hp49gp_driver = { }; static struct usb_serial_driver hp49gp_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 7314c04727f..28fb0d42a16 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -76,7 +76,9 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 2 port adapter", .short_name = "edgeport_2", .id_table = edgeport_2port_id_table, @@ -104,7 +106,9 @@ static struct usb_serial_driver edgeport_2port_device = { }; static struct usb_serial_driver edgeport_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 4 port adapter", .short_name = "edgeport_4", .id_table = edgeport_4port_id_table, @@ -132,7 +136,9 @@ static struct usb_serial_driver edgeport_4port_device = { }; static struct usb_serial_driver edgeport_8port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport 8 port adapter", .short_name = "edgeport_8", .id_table = edgeport_8port_id_table, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4328cc702ef..74228a07264 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2983,7 +2983,9 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 1 port adapter", .short_name = "edgeport_ti_1", .id_table = edgeport_1port_id_table, @@ -3011,7 +3013,9 @@ static struct usb_serial_driver edgeport_1port_device = { }; static struct usb_serial_driver edgeport_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Edgeport TI 2 port adapter", .short_name = "edgeport_ti_2", .id_table = edgeport_2port_id_table, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9a79ad8d7a5..9aedfb91b20 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -548,7 +548,9 @@ static struct usb_driver ipaq_driver = { /* All of the device info needed for the Compaq iPAQ */ static struct usb_serial_driver ipaq_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 04524d34de3..2ba69623ac0 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -444,7 +444,9 @@ static int ipw_disconnect(struct usb_serial_port *port) } static struct usb_serial_driver ipw_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IPWireless converter", .short_name = "ipw", .id_table = usb_ipw_ids, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index ecfb2060ea0..bf079059819 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -134,7 +134,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 97e7d9e53e3..124d46e76a2 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -571,7 +571,9 @@ static struct usb_device_id keyspan_4port_ids[] = { /* Structs for the devices, pre and post renumeration. */ static struct usb_serial_driver keyspan_pre_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan - (without firmware)", .short_name = "keyspan_no_firm", .id_table = keyspan_pre_ids, @@ -583,7 +585,9 @@ static struct usb_serial_driver keyspan_pre_device = { }; static struct usb_serial_driver keyspan_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 1 port adapter", .short_name = "keyspan_1", .id_table = keyspan_1port_ids, @@ -608,7 +612,9 @@ static struct usb_serial_driver keyspan_1port_device = { }; static struct usb_serial_driver keyspan_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 2 port adapter", .short_name = "keyspan_2", .id_table = keyspan_2port_ids, @@ -633,7 +639,9 @@ static struct usb_serial_driver keyspan_2port_device = { }; static struct usb_serial_driver keyspan_4port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan 4 port adapter", .short_name = "keyspan_4", .id_table = keyspan_4port_ids, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 8fad0e963dd..389b7833e3a 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -784,7 +784,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) #ifdef KEYSPAN static struct usb_serial_driver keyspan_pda_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA - (prerenumeration)", .short_name = "keyspan_pda_pre", .id_table = id_table_fake, @@ -798,7 +800,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { #ifdef XIRCOM static struct usb_serial_driver xircom_pgs_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Xircom / Entregra PGS - (prerenumeration)", .short_name = "xircom_no_firm", .id_table = id_table_fake_xircom, @@ -811,7 +815,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { #endif static struct usb_serial_driver keyspan_pda_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Keyspan PDA", .short_name = "keyspan_pda", .id_table = id_table_std, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index be082706b95..586108ce789 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -124,7 +124,9 @@ static struct usb_driver kl5kusb105d_driver = { }; static struct usb_serial_driver kl5kusb105d_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KL5KUSB105D / PalmConnect", .short_name = "kl5kusb105d", .id_table = id_table, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 94944340bb8..a9578e05b22 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -106,7 +106,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 9470964316a..7dcf91c5f83 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -133,7 +133,9 @@ static struct usb_driver mct_u232_driver = { }; static struct usb_serial_driver mct_u232_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "MCT U232", .short_name = "mct_u232", .id_table = id_table_combined, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 53c0588877c..f6327cc1b2e 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -89,7 +89,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "ZyXEL - omni.net lcd plus usb", .short_name = "omninet", .id_table = id_table, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6ec9266e2e9..a2b5adf3486 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -106,7 +106,9 @@ static struct usb_driver option_driver = { * recognizes separately, thus num_port=1. */ static struct usb_serial_driver option_3port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Option 3G data card", .short_name = "option", .id_table = option_ids, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 7134648e078..beef3c4cee6 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -176,7 +176,9 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, /* All of the device info needed for the PL2303 SIO serial converter */ static struct usb_serial_driver pl2303_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 87871bb647d..42a86ab689f 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -398,7 +398,9 @@ static int safe_startup (struct usb_serial *serial) } static struct usb_serial_driver safe_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index f2efaf6f3d7..eab8a6de092 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -256,7 +256,9 @@ static struct usb_driver ti_usb_driver = { }; static struct usb_serial_driver ti_1port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, @@ -283,7 +285,9 @@ static struct usb_serial_driver ti_1port_device = { }; static struct usb_serial_driver ti_2port_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cf083da15eb..08f600327db 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -507,7 +507,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) /* lock this module before we call it * this may fail, which means we must bail out, * safe because we are called with BKL held */ - if (!try_module_get(serial->type->owner)) { + if (!try_module_get(serial->type->driver.owner)) { retval = -ENODEV; goto bailout_kref_put; } @@ -522,7 +522,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) return 0; bailout_module_put: - module_put(serial->type->owner); + module_put(serial->type->driver.owner); bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; @@ -553,7 +553,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp) port->tty = NULL; } - module_put(port->serial->type->owner); + module_put(port->serial->type->driver.owner); } kref_put(&port->serial->kref, destroy_serial); @@ -718,8 +718,8 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int continue; length += sprintf (page+length, "%d:", i); - if (serial->type->owner) - length += sprintf (page+length, " module:%s", module_name(serial->type->owner)); + if (serial->type->driver.owner) + length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); length += sprintf (page+length, " name:\"%s\"", serial->type->name); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), @@ -900,7 +900,7 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; @@ -908,7 +908,7 @@ int usb_serial_probe(struct usb_interface *interface, id = usb_match_id(interface, type->id_table); retval = type->probe(serial, id); - module_put(type->owner); + module_put(type->driver.owner); if (retval) { dbg ("sub driver rejected device"); @@ -1007,13 +1007,13 @@ int usb_serial_probe(struct usb_interface *interface, if (!num_ports) { /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); kfree (serial); return -EIO; } num_ports = type->calc_num_ports (serial); - module_put(type->owner); + module_put(type->driver.owner); } if (!num_ports) num_ports = type->num_ports; @@ -1158,12 +1158,12 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has an attach function, call it */ if (type->attach) { - if (!try_module_get(type->owner)) { + if (!try_module_get(type->driver.owner)) { dev_err(&interface->dev, "module get failed, exiting\n"); goto probe_error; } retval = type->attach (serial); - module_put(type->owner); + module_put(type->driver.owner); if (retval < 0) goto probe_error; if (retval > 0) { diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index d6738b1b042..4ca5e0c0561 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -189,7 +189,6 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @owner: pointer to the module that owns this driver. * @name: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. * @short_name: a pointer to a string that describes this driver in @@ -226,9 +225,11 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. + * + * The driver.owner field should be set to the module owner of this driver. + * */ struct usb_serial_driver { - struct module *owner; char *name; char *short_name; const struct usb_device_id *id_table; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 825451b3788..0ac0377e868 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -312,7 +312,9 @@ static struct usb_driver visor_driver = { /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ static struct usb_serial_driver handspring_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Handspring Visor / Palm OS", .short_name = "visor", .id_table = id_table, @@ -340,7 +342,9 @@ static struct usb_serial_driver handspring_device = { /* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ static struct usb_serial_driver clie_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 5.0", .short_name = "clie_5", .id_table = clie_id_5_table, @@ -368,7 +372,9 @@ static struct usb_serial_driver clie_5_device = { /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_driver clie_3_5_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Sony Clie 3.5", .short_name = "clie_3.5", .id_table = clie_id_3_5_table, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index dc06664bfa0..fb95a34a1cf 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -157,7 +157,9 @@ static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs); static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT - (prerenumeration)", .short_name = "whiteheatnofirm", .id_table = id_table_prerenumeration, @@ -170,7 +172,9 @@ static struct usb_serial_driver whiteheat_fake_device = { }; static struct usb_serial_driver whiteheat_device = { - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .name = "Connect Tech - WhiteHEAT", .short_name = "whiteheat", .id_table = id_table_std, -- cgit v1.2.3-70-g09d2 From 502b95c1cc9e2c855a26f90fc999c5211b8ba957 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move old changelog comments out of source code Create a new file just for these things, as they just get in the way in the source files. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ChangeLog.old | 730 +++++++++++++++++++++++++++++++++++++++ drivers/usb/serial/io_edgeport.c | 219 ------------ drivers/usb/serial/pl2303.c | 23 +- drivers/usb/serial/usb-serial.c | 309 +---------------- drivers/usb/serial/usb-serial.h | 44 +-- drivers/usb/serial/visor.c | 131 +------ 6 files changed, 736 insertions(+), 720 deletions(-) create mode 100644 drivers/usb/serial/ChangeLog.old (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old new file mode 100644 index 00000000000..c1b279939bb --- /dev/null +++ b/drivers/usb/serial/ChangeLog.old @@ -0,0 +1,730 @@ +This is the contents of some of the drivers/usb/serial/ files that had old +changelog comments. They were quite old, and out of date, and we don't keep +them anymore, so I've put them here, away from the source files, in case +people still care to see them. + +- Greg Kroah-Hartman October 20, 2005 + +----------------------------------------------------------------------- +usb-serial.h Change Log comments: + + (03/26/2002) gkh + removed the port->tty check from port_paranoia_check() due to serial + consoles not having a tty device assigned to them. + + (12/03/2001) gkh + removed active from the port structure. + added documentation to the usb_serial_device_type structure + + (10/10/2001) gkh + added vendor and product to serial structure. Needed to determine device + owner when the device is disconnected. + + (05/30/2001) gkh + added sem to port structure and removed port_lock + + (10/05/2000) gkh + Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help + fix bug with urb->dev not being set properly, now that the usb core + needs it. + + (09/11/2000) gkh + Added usb_serial_debug_data function to help get rid of #DEBUG in the + drivers. + + (08/28/2000) gkh + Added port_lock to port structure. + + (08/08/2000) gkh + Added open_count to port structure. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + +----------------------------------------------------------------------- +usb-serial.c Change Log comments: + + (12/10/2002) gkh + Split the ports off into their own struct device, and added a + usb-serial bus driver. + + (11/19/2002) gkh + removed a few #ifdefs for the generic code and cleaned up the failure + logic in initialization. + + (10/02/2002) gkh + moved the console code to console.c and out of this file. + + (06/05/2002) gkh + moved location of startup() call in serial_probe() until after all + of the port information and endpoints are initialized. This makes + things easier for some drivers. + + (04/10/2002) gkh + added serial_read_proc function which creates a + /proc/tty/driver/usb-serial file. + + (03/27/2002) gkh + Got USB serial console code working properly and merged into the main + version of the tree. Thanks to Randy Dunlap for the initial version + of this code, and for pushing me to finish it up. + The USB serial console works with any usb serial driver device. + + (03/21/2002) gkh + Moved all manipulation of port->open_count into the core. Now the + individual driver's open and close functions are called only when the + first open() and last close() is called. Making the drivers a bit + smaller and simpler. + Fixed a bug if a driver didn't have the owner field set. + + (02/26/2002) gkh + Moved all locking into the main serial_* functions, instead of having + the individual drivers have to grab the port semaphore. This should + reduce races. + Reworked the MOD_INC logic a bit to always increment and decrement, even + if the generic driver is being used. + + (10/10/2001) gkh + usb_serial_disconnect() now sets the serial->dev pointer is to NULL to + help prevent child drivers from accessing the device since it is now + gone. + + (09/13/2001) gkh + Moved generic driver initialize after we have registered with the USB + core. Thanks to Randy Dunlap for pointing this problem out. + + (07/03/2001) gkh + Fixed module paramater size. Thanks to John Brockmeyer for the pointer. + Fixed vendor and product getting defined through the MODULE_PARM macro + if the Generic driver wasn't compiled in. + Fixed problem with generic_shutdown() not being called for drivers that + don't have a shutdown() function. + + (06/06/2001) gkh + added evil hack that is needed for the prolific pl2303 device due to the + crazy way its endpoints are set up. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (04/08/2001) gb + Identify version on module load. + + 2001_02_05 gkh + Fixed buffer overflows bug with the generic serial driver. Thanks to + Todd Squires for fixing this. + + (01/10/2001) gkh + Fixed bug where the generic serial adaptor grabbed _any_ device that was + offered to it. + + (12/12/2000) gkh + Removed MOD_INC and MOD_DEC from poll and disconnect functions, and + moved them to the serial_open and serial_close functions. + Also fixed bug with there not being a MOD_DEC for the generic driver + (thanks to Gary Brubaker for finding this.) + + (11/29/2000) gkh + Small NULL pointer initialization cleanup which saves a bit of disk image + + (11/01/2000) Adam J. Richter + instead of using idVendor/idProduct pairs, usb serial drivers + now identify their hardware interest with usb_device_id tables, + which they usually have anyhow for use with MODULE_DEVICE_TABLE. + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (08/28/2000) gkh + Added port_lock to port structure. + Added locks for SMP safeness to generic driver + Fixed the ability to open a generic device's port more than once. + + (07/23/2000) gkh + Added bulk_out_endpointAddress to port structure. + + (07/19/2000) gkh, pberger, and borchers + Modifications to allow usb-serial drivers to be modules. + + (07/03/2000) gkh + Added more debugging to serial_ioctl call + + (06/25/2000) gkh + Changed generic_write_bulk_callback to not call wake_up_interruptible + directly, but to have port_softint do it at a safer time. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (05/22/2000) gkh + Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be + removed from the individual device source files. + + (05/03/2000) gkh + Added the Digi Acceleport driver from Al Borchers and Peter Berger. + + (05/02/2000) gkh + Changed devfs and tty register code to work properly now. This was based on + the ACM driver changes by Vojtech Pavlik. + + (04/27/2000) Ryan VanderBijl + Put calls to *_paranoia_checks into one function. + + (04/23/2000) gkh + Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. + Moved when the startup code printed out the devices that are supported. + + (04/19/2000) gkh + Added driver for ZyXEL omni.net lcd plus ISDN TA + Made startup info message specify which drivers were compiled in. + + (04/03/2000) gkh + Changed the probe process to remove the module unload races. + Changed where the tty layer gets initialized to have devfs work nicer. + Added initial devfs support. + + (03/26/2000) gkh + Split driver up into device specific pieces. + + (03/19/2000) gkh + Fixed oops that could happen when device was removed while a program + was talking to the device. + Removed the static urbs and now all urbs are created and destroyed + dynamically. + Reworked the internal interface. Now everything is based on the + usb_serial_port structure instead of the larger usb_serial structure. + This fixes the bug that a multiport device could not have more than + one port open at one time. + + (03/17/2000) gkh + Added config option for debugging messages. + Added patch for keyspan pda from Brian Warner. + + (03/06/2000) gkh + Added the keyspan pda code from Brian Warner + Moved a bunch of the port specific stuff into its own structure. This + is in anticipation of the true multiport devices (there's a bug if you + try to access more than one port of any multiport device right now) + + (02/21/2000) gkh + Made it so that any serial devices only have to specify which functions + they want to overload from the generic function calls (great, + inheritance in C, in a driver, just what I wanted...) + Added support for set_termios and ioctl function calls. No drivers take + advantage of this yet. + Removed the #ifdef MODULE, now there is no module specific code. + Cleaned up a few comments in usb-serial.h that were wrong (thanks again + to Miles Lott). + Small fix to get_free_serial. + + (02/14/2000) gkh + Removed the Belkin and Peracom functionality from the driver due to + the lack of support from the vendor, and me not wanting people to + accidenatly buy the device, expecting it to work with Linux. + Added read_bulk_callback and write_bulk_callback to the type structure + for the needs of the FTDI and WhiteHEAT driver. + Changed all reverences to FTDI to FTDI_SIO at the request of Bill + Ryder. + Changed the output urb size back to the max endpoint size to make + the ftdi_sio driver have it easier, and due to the fact that it didn't + really increase the speed any. + + (02/11/2000) gkh + Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a + patch from Miles Lott (milos@insync.net). + Fixed bug with not restoring the minor range that a device grabs, if + the startup function fails (thanks Miles for finding this). + + (02/05/2000) gkh + Added initial framework for the Keyspan PDA serial converter so that + Brian Warner has a place to put his code. + Made the ezusb specific functions generic enough that different + devices can use them (whiteheat and keyspan_pda both need them). + Split out a whole bunch of structure and other stuff to a separate + usb-serial.h file. + Made the Visor connection messages a little more understandable, now + that Miles Lott (milos@insync.net) has gotten the Generic channel to + work. Also made them always show up in the log file. + + (01/25/2000) gkh + Added initial framework for FTDI serial converter so that Bill Ryder + has a place to put his code. + Added the vendor specific info from Handspring. Now we can print out + informational debug messages as well as understand what is happening. + + (01/23/2000) gkh + Fixed problem of crash when trying to open a port that didn't have a + device assigned to it. Made the minor node finding a little smarter, + now it looks to find a continuous space for the new device. + + (01/21/2000) gkh + Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) + Fixed get_serial_by_minor which was all messed up for multi port + devices. Fixed multi port problem for generic devices. Now the number + of ports is determined by the number of bulk out endpoints for the + generic device. + + (01/19/2000) gkh + Removed lots of cruft that was around from the old (pre urb) driver + interface. + Made the serial_table dynamic. This should save lots of memory when + the number of minor nodes goes up to 256. + Added initial support for devices that have more than one port. + Added more debugging comments for the Visor, and added a needed + set_configuration call. + + (01/17/2000) gkh + Fixed the WhiteHEAT firmware (my processing tool had a bug) + and added new debug loader firmware for it. + Removed the put_char function as it isn't really needed. + Added visor startup commands as found by the Win98 dump. + + (01/13/2000) gkh + Fixed the vendor id for the generic driver to the one I meant it to be. + + (01/12/2000) gkh + Forget the version numbering...that's pretty useless... + Made the driver able to be compiled so that the user can select which + converter they want to use. This allows people who only want the Visor + support to not pay the memory size price of the WhiteHEAT. + Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) + grabbed the root hub. Not good. + + version 0.4.0 (01/10/2000) gkh + Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT + device. Added startup function to allow firmware to be downloaded to + a device if it needs to be. + Added firmware download logic to the WhiteHEAT device. + Started to add #defines to split up the different drivers for potential + configuration option. + + version 0.3.1 (12/30/99) gkh + Fixed problems with urb for bulk out. + Added initial support for multiple sets of endpoints. This enables + the Handspring Visor to be attached successfully. Only the first + bulk in / bulk out endpoint pair is being used right now. + + version 0.3.0 (12/27/99) gkh + Added initial support for the Handspring Visor based on a patch from + Miles Lott (milos@sneety.insync.net) + Cleaned up the code a bunch and converted over to using urbs only. + + version 0.2.3 (12/21/99) gkh + Added initial support for the Connect Tech WhiteHEAT converter. + Incremented the number of ports in expectation of getting the + WhiteHEAT to work properly (4 ports per connection). + Added notification on insertion and removal of what port the + device is/was connected to (and what kind of device it was). + + version 0.2.2 (12/16/99) gkh + Changed major number to the new allocated number. We're legal now! + + version 0.2.1 (12/14/99) gkh + Fixed bug that happens when device node is opened when there isn't a + device attached to it. Thanks to marek@webdesign.no for noticing this. + + version 0.2.0 (11/10/99) gkh + Split up internals to make it easier to add different types of serial + converters to the code. + Added a "generic" driver that gets it's vendor and product id + from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) + for the idea and sample code (from the usb scanner driver.) + Cleared up any licensing questions by releasing it under the GNU GPL. + + version 0.1.2 (10/25/99) gkh + Fixed bug in detecting device. + + version 0.1.1 (10/05/99) gkh + Changed the major number to not conflict with anything else. + + version 0.1 (09/28/99) gkh + Can recognize the two different devices and start up a read from + device when asked to. Writes also work. No control signals yet, this + all is vendor specific data (i.e. no spec), also no control for + different baud rates or other bit settings. + Currently we are using the same devid as the acm driver. This needs + to change. + +----------------------------------------------------------------------- +visor.c Change Log comments: + + (06/03/2003) Judd Montgomery + Added support for module parameter options for untested/unknown + devices. + + (03/09/2003) gkh + Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl + for the information. + + (03/05/2003) gkh + Think Treo support is now working. + + (04/03/2002) gkh + Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI + for the information. + + (03/27/2002) gkh + Removed assumptions that port->tty was always valid (is not true + for usb serial console devices.) + + (03/23/2002) gkh + Added support for the Palm i705 device, thanks to Thomas Riemer + for the information. + + (03/21/2002) gkh + Added support for the Palm m130 device, thanks to Udo Eisenbarth + for the information. + + (02/27/2002) gkh + Reworked the urb handling logic. We have no more pool, but dynamically + allocate the urb and the transfer buffer on the fly. In testing this + does not incure any measurable overhead. This also relies on the fact + that we have proper reference counting logic for urbs. + + (02/21/2002) SilaS + Added initial support for the Palm m515 devices. + + (02/14/2002) gkh + Added support for the Clie S-360 device. + + (12/18/2001) gkh + Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand + for the patch. + + (11/11/2001) gkh + Added support for the m125 devices, and added check to prevent oopses + for Clié devices that lie about the number of ports they have. + + (08/30/2001) gkh + Added support for the Clie devices, both the 3.5 and 4.0 os versions. + Many thanks to Daniel Burke, and Bryan Payne for helping with this. + + (08/23/2001) gkh + fixed a few potential bugs pointed out by Oliver Neukum. + + (05/30/2001) gkh + switched from using spinlock to a semaphore, which fixes lots of problems. + + (05/28/2000) gkh + Added initial support for the Palm m500 and Palm m505 devices. + + (04/08/2001) gb + Identify version on module load. + + (01/21/2000) gkh + Added write_room and chars_in_buffer, as they were previously using the + generic driver versions which is all wrong now that we are using an urb + pool. Thanks to Wolfgang Grandegger for pointing this out to me. + Removed count assignment in the write function, which was not needed anymore + either. Thanks to Al Borchers for pointing this out. + + (12/12/2000) gkh + Moved MOD_DEC to end of visor_close to be nicer, as the final write + message can sleep. + + (11/12/2000) gkh + Fixed bug with data being dropped on the floor by forcing tty->low_latency + to be on. Hopefully this fixes the OHCI issue! + + (11/01/2000) Adam J. Richter + usb_device_id table support + + (10/05/2000) gkh + Fixed bug with urb->dev not being set properly, now that the usb + core needs it. + + (09/11/2000) gkh + Got rid of always calling kmalloc for every urb we wrote out to the + device. + Added visor_read_callback so we can keep track of bytes in and out for + those people who like to know the speed of their device. + Removed DEBUG #ifdefs with call to usb_serial_debug_data + + (09/06/2000) gkh + Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ + the host controller drivers set urb->dev = NULL when the urb is finished. + + (08/28/2000) gkh + Added locks for SMP safeness. + + (08/08/2000) gkh + Fixed endian problem in visor_startup. + Fixed MOD_INC and MOD_DEC logic and the ability to open a port more + than once. + + (07/23/2000) gkh + Added pool of write urbs to speed up transfers to the visor. + + (07/19/2000) gkh + Added module_init and module_exit functions to handle the fact that this + driver is a loadable module now. + + (07/03/2000) gkh + Added visor_set_ioctl and visor_set_termios functions (they don't do much + of anything, but are good for debugging.) + + (06/25/2000) gkh + Fixed bug in visor_unthrottle that should help with the disconnect in PPP + bug that people have been reporting. + + (06/23/2000) gkh + Cleaned up debugging statements in a quest to find UHCI timeout bug. + + (04/27/2000) Ryan VanderBijl + Fixed memory leak in visor_close + + (03/26/2000) gkh + Split driver up into device specific pieces. + +----------------------------------------------------------------------- +pl2303.c Change Log comments: + + 2002_Mar_26 gkh + allowed driver to work properly if there is no tty assigned to a port + (this happens for serial console devices.) + + 2001_Oct_06 gkh + Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. + + 2001_Sep_19 gkh + Added break support. + + 2001_Aug_30 gkh + fixed oops in write_bulk_callback. + + 2001_Aug_28 gkh + reworked buffer logic to be like other usb-serial drivers. Hopefully + removing some reported problems. + + 2001_Jun_06 gkh + finished porting to 2.4 format. + + +----------------------------------------------------------------------- +io_edgeport.c Change Log comments: + + 2003_04_03 al borchers + - fixed a bug (that shows up with dosemu) where the tty struct is + used in a callback after it has been freed + + 2.3 2002_03_08 greg kroah-hartman + - fixed bug when multiple devices were attached at the same time. + + 2.2 2001_11_14 greg kroah-hartman + - fixed bug in edge_close that kept the port from being used more + than once. + - fixed memory leak on device removal. + - fixed potential double free of memory when command urb submitting + failed. + - other small cleanups when the device is removed + + 2.1 2001_07_09 greg kroah-hartman + - added support for TIOCMBIS and TIOCMBIC. + + (04/08/2001) gb + - Identify version on module load. + + 2.0 2001_03_05 greg kroah-hartman + - reworked entire driver to fit properly in with the other usb-serial + drivers. Occasional oopses still happen, but it's a good start. + + 1.2.3 (02/23/2001) greg kroah-hartman + - changed device table to work properly for 2.4.x final format. + - fixed problem with dropping data at high data rates. + + 1.2.2 (11/27/2000) greg kroah-hartman + - cleaned up more NTisms. + - Added device table for 2.4.0-test11 + + 1.2.1 (11/08/2000) greg kroah-hartman + - Started to clean up NTisms. + - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 + + 1.2 (10/17/2000) David Iacovelli + Remove all EPIC code and GPL source + Fix RELEVANT_IFLAG macro to include flow control + changes port configuration changes. + Fix redefinition of SERIAL_MAGIC + Change all timeout values to 5 seconds + Tried to fix the UHCI multiple urb submission, but failed miserably. + it seems to work fine with OHCI. + ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must + find a way to work arount this UHCI bug ) + + 1.1 (10/11/2000) David Iacovelli + Fix XON/XOFF flow control to support both IXON and IXOFF + + 0.9.27 (06/30/2000) David Iacovelli + Added transmit queue and now allocate urb for command writes. + + 0.9.26 (06/29/2000) David Iacovelli + Add support for 80251 based edgeport + + 0.9.25 (06/27/2000) David Iacovelli + Do not close the port if it has multiple opens. + + 0.9.24 (05/26/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + and first cut at running BlackBox Demo + + 0.9.23 (05/24/2000) David Iacovelli + Add IOCTLs to support RXTX and JAVA POS + + 0.9.22 (05/23/2000) David Iacovelli + fixed bug in enumeration. If epconfig turns on mapping by + path after a device is already plugged in, we now update + the mapping correctly + + 0.9.21 (05/16/2000) David Iacovelli + Added BlockUntilChaseResp() to also wait for txcredits + Updated the way we allocate and handle write URBs + Add debug code to dump buffers + + 0.9.20 (05/01/2000) David Iacovelli + change driver to use usb/tts/ + + 0.9.19 (05/01/2000) David Iacovelli + Update code to compile if DEBUG is off + + 0.9.18 (04/28/2000) David Iacovelli + cleanup and test tty_register with devfs + + 0.9.17 (04/27/2000) greg kroah-hartman + changed tty_register around to be like the way it + was before, but now it works properly with devfs. + + 0.9.16 (04/26/2000) david iacovelli + Fixed bug in GetProductInfo() + + 0.9.15 (04/25/2000) david iacovelli + Updated enumeration + + 0.9.14 (04/24/2000) david iacovelli + Removed all config/status IOCTLS and + converted to using /proc/edgeport + still playing with devfs + + 0.9.13 (04/24/2000) david iacovelli + Removed configuration based on ttyUSB0 + Added support for configuration using /prod/edgeport + first attempt at using devfs (not working yet!) + Added IOCTL to GetProductInfo() + Added support for custom baud rates + Add support for random port numbers + + 0.9.12 (04/18/2000) david iacovelli + added additional configuration IOCTLs + use ttyUSB0 for configuration + + 0.9.11 (04/17/2000) greg kroah-hartman + fixed module initialization race conditions. + made all urbs dynamically allocated. + made driver devfs compatible. now it only registers the tty device + when the device is actually plugged in. + + 0.9.10 (04/13/2000) greg kroah-hartman + added proc interface framework. + + 0.9.9 (04/13/2000) david iacovelli + added enumeration code and ioctls to configure the device + + 0.9.8 (04/12/2000) david iacovelli + Change interrupt read start when device is plugged in + and stop when device is removed + process interrupt reads when all ports are closed + (keep value of rxBytesAvail consistent with the edgeport) + set the USB_BULK_QUEUE flag so that we can shove a bunch + of urbs at once down the pipe + + 0.9.7 (04/10/2000) david iacovelli + start to add enumeration code. + generate serial number for epic devices + add support for kdb + + 0.9.6 (03/30/2000) david iacovelli + add IOCTL to get string, manufacture, and boot descriptors + + 0.9.5 (03/14/2000) greg kroah-hartman + more error checking added to SerialOpen to try to fix UHCI open problem + + 0.9.4 (03/09/2000) greg kroah-hartman + added more error checking to handle oops when data is hanging + around and tty is abruptly closed. + + 0.9.3 (03/09/2000) david iacovelli + Add epic support for xon/xoff chars + play with performance + + 0.9.2 (03/08/2000) greg kroah-hartman + changed most "info" calls to "dbg" + implemented flow control properly in the termios call + + 0.9.1 (03/08/2000) david iacovelli + added EPIC support + enabled bootloader update + + 0.9 (03/08/2000) greg kroah-hartman + Release to IO networks. + Integrated changes that David made + made getting urbs for writing SMP safe + + 0.8 (03/07/2000) greg kroah-hartman + Release to IO networks. + Fixed problems that were seen in code by David. + Now both Edgeport/4 and Edgeport/2 works properly. + Changed most of the functions to use port instead of serial. + + 0.7 (02/27/2000) greg kroah-hartman + Milestone 3 release. + Release to IO Networks + ioctl for waiting on line change implemented. + ioctl for getting statistics implemented. + multiport support working. + lsr and msr registers are now handled properly. + change break now hooked up and working. + support for all known Edgeport devices. + + 0.6 (02/22/2000) greg kroah-hartman + Release to IO networks. + CHASE is implemented correctly when port is closed. + SerialOpen now blocks correctly until port is fully opened. + + 0.5 (02/20/2000) greg kroah-hartman + Release to IO networks. + Known problems: + modem status register changes are not sent on to the user + CHASE is not implemented when the port is closed. + + 0.4 (02/16/2000) greg kroah-hartman + Second cut at the CeBit demo. + Doesn't leak memory on every write to the port + Still small leaks on startup. + Added support for Edgeport/2 and Edgeport/8 + + 0.3 (02/15/2000) greg kroah-hartman + CeBit demo release. + Force the line settings to 4800, 8, 1, e for the demo. + Warning! This version leaks memory like crazy! + + 0.2 (01/30/2000) greg kroah-hartman + Milestone 1 release. + Device is found by USB subsystem, enumerated, fimware is downloaded + and the descriptors are printed to the debug log, config is set, and + green light starts to blink. Open port works, and data can be sent + and received at the default settings of the UART. Loopback connector + and debug log confirms this. + + 0.1 (01/23/2000) greg kroah-hartman + Initial release to help IO Networks try to set up their test system. + Edgeport4 is recognized, firmware is downloaded, config is set so + device blinks green light every 3 sec. Port is bound, but opening, + closing, and sending data do not work properly. + + diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 04bfe279d76..dc4c498bd1e 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -27,225 +27,6 @@ * Networks technical support, or Peter Berger , * or Al Borchers . * - * Version history: - * - * 2003_04_03 al borchers - * - fixed a bug (that shows up with dosemu) where the tty struct is - * used in a callback after it has been freed - * - * 2.3 2002_03_08 greg kroah-hartman - * - fixed bug when multiple devices were attached at the same time. - * - * 2.2 2001_11_14 greg kroah-hartman - * - fixed bug in edge_close that kept the port from being used more - * than once. - * - fixed memory leak on device removal. - * - fixed potential double free of memory when command urb submitting - * failed. - * - other small cleanups when the device is removed - * - * 2.1 2001_07_09 greg kroah-hartman - * - added support for TIOCMBIS and TIOCMBIC. - * - * (04/08/2001) gb - * - Identify version on module load. - * - * 2.0 2001_03_05 greg kroah-hartman - * - reworked entire driver to fit properly in with the other usb-serial - * drivers. Occasional oopses still happen, but it's a good start. - * - * 1.2.3 (02/23/2001) greg kroah-hartman - * - changed device table to work properly for 2.4.x final format. - * - fixed problem with dropping data at high data rates. - * - * 1.2.2 (11/27/2000) greg kroah-hartman - * - cleaned up more NTisms. - * - Added device table for 2.4.0-test11 - * - * 1.2.1 (11/08/2000) greg kroah-hartman - * - Started to clean up NTisms. - * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9 - * - * 1.2 (10/17/2000) David Iacovelli - * Remove all EPIC code and GPL source - * Fix RELEVANT_IFLAG macro to include flow control - * changes port configuration changes. - * Fix redefinition of SERIAL_MAGIC - * Change all timeout values to 5 seconds - * Tried to fix the UHCI multiple urb submission, but failed miserably. - * it seems to work fine with OHCI. - * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must - * find a way to work arount this UHCI bug ) - * - * 1.1 (10/11/2000) David Iacovelli - * Fix XON/XOFF flow control to support both IXON and IXOFF - * - * 0.9.27 (06/30/2000) David Iacovelli - * Added transmit queue and now allocate urb for command writes. - * - * 0.9.26 (06/29/2000) David Iacovelli - * Add support for 80251 based edgeport - * - * 0.9.25 (06/27/2000) David Iacovelli - * Do not close the port if it has multiple opens. - * - * 0.9.24 (05/26/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * and first cut at running BlackBox Demo - * - * 0.9.23 (05/24/2000) David Iacovelli - * Add IOCTLs to support RXTX and JAVA POS - * - * 0.9.22 (05/23/2000) David Iacovelli - * fixed bug in enumeration. If epconfig turns on mapping by - * path after a device is already plugged in, we now update - * the mapping correctly - * - * 0.9.21 (05/16/2000) David Iacovelli - * Added BlockUntilChaseResp() to also wait for txcredits - * Updated the way we allocate and handle write URBs - * Add debug code to dump buffers - * - * 0.9.20 (05/01/2000) David Iacovelli - * change driver to use usb/tts/ - * - * 0.9.19 (05/01/2000) David Iacovelli - * Update code to compile if DEBUG is off - * - * 0.9.18 (04/28/2000) David Iacovelli - * cleanup and test tty_register with devfs - * - * 0.9.17 (04/27/2000) greg kroah-hartman - * changed tty_register around to be like the way it - * was before, but now it works properly with devfs. - * - * 0.9.16 (04/26/2000) david iacovelli - * Fixed bug in GetProductInfo() - * - * 0.9.15 (04/25/2000) david iacovelli - * Updated enumeration - * - * 0.9.14 (04/24/2000) david iacovelli - * Removed all config/status IOCTLS and - * converted to using /proc/edgeport - * still playing with devfs - * - * 0.9.13 (04/24/2000) david iacovelli - * Removed configuration based on ttyUSB0 - * Added support for configuration using /prod/edgeport - * first attempt at using devfs (not working yet!) - * Added IOCTL to GetProductInfo() - * Added support for custom baud rates - * Add support for random port numbers - * - * 0.9.12 (04/18/2000) david iacovelli - * added additional configuration IOCTLs - * use ttyUSB0 for configuration - * - * 0.9.11 (04/17/2000) greg kroah-hartman - * fixed module initialization race conditions. - * made all urbs dynamically allocated. - * made driver devfs compatible. now it only registers the tty device - * when the device is actually plugged in. - * - * 0.9.10 (04/13/2000) greg kroah-hartman - * added proc interface framework. - * - * 0.9.9 (04/13/2000) david iacovelli - * added enumeration code and ioctls to configure the device - * - * 0.9.8 (04/12/2000) david iacovelli - * Change interrupt read start when device is plugged in - * and stop when device is removed - * process interrupt reads when all ports are closed - * (keep value of rxBytesAvail consistent with the edgeport) - * set the USB_BULK_QUEUE flag so that we can shove a bunch - * of urbs at once down the pipe - * - * 0.9.7 (04/10/2000) david iacovelli - * start to add enumeration code. - * generate serial number for epic devices - * add support for kdb - * - * 0.9.6 (03/30/2000) david iacovelli - * add IOCTL to get string, manufacture, and boot descriptors - * - * 0.9.5 (03/14/2000) greg kroah-hartman - * more error checking added to SerialOpen to try to fix UHCI open problem - * - * 0.9.4 (03/09/2000) greg kroah-hartman - * added more error checking to handle oops when data is hanging - * around and tty is abruptly closed. - * - * 0.9.3 (03/09/2000) david iacovelli - * Add epic support for xon/xoff chars - * play with performance - * - * 0.9.2 (03/08/2000) greg kroah-hartman - * changed most "info" calls to "dbg" - * implemented flow control properly in the termios call - * - * 0.9.1 (03/08/2000) david iacovelli - * added EPIC support - * enabled bootloader update - * - * 0.9 (03/08/2000) greg kroah-hartman - * Release to IO networks. - * Integrated changes that David made - * made getting urbs for writing SMP safe - * - * 0.8 (03/07/2000) greg kroah-hartman - * Release to IO networks. - * Fixed problems that were seen in code by David. - * Now both Edgeport/4 and Edgeport/2 works properly. - * Changed most of the functions to use port instead of serial. - * - * 0.7 (02/27/2000) greg kroah-hartman - * Milestone 3 release. - * Release to IO Networks - * ioctl for waiting on line change implemented. - * ioctl for getting statistics implemented. - * multiport support working. - * lsr and msr registers are now handled properly. - * change break now hooked up and working. - * support for all known Edgeport devices. - * - * 0.6 (02/22/2000) greg kroah-hartman - * Release to IO networks. - * CHASE is implemented correctly when port is closed. - * SerialOpen now blocks correctly until port is fully opened. - * - * 0.5 (02/20/2000) greg kroah-hartman - * Release to IO networks. - * Known problems: - * modem status register changes are not sent on to the user - * CHASE is not implemented when the port is closed. - * - * 0.4 (02/16/2000) greg kroah-hartman - * Second cut at the CeBit demo. - * Doesn't leak memory on every write to the port - * Still small leaks on startup. - * Added support for Edgeport/2 and Edgeport/8 - * - * 0.3 (02/15/2000) greg kroah-hartman - * CeBit demo release. - * Force the line settings to 4800, 8, 1, e for the demo. - * Warning! This version leaks memory like crazy! - * - * 0.2 (01/30/2000) greg kroah-hartman - * Milestone 1 release. - * Device is found by USB subsystem, enumerated, fimware is downloaded - * and the descriptors are printed to the debug log, config is set, and - * green light starts to blink. Open port works, and data can be sent - * and received at the default settings of the UART. Loopback connector - * and debug log confirms this. - * - * 0.1 (01/23/2000) greg kroah-hartman - * Initial release to help IO Networks try to set up their test system. - * Edgeport4 is recognized, firmware is downloaded, config is set so - * device blinks green light every 3 sec. Port is bound, but opening, - * closing, and sending data do not work properly. - * */ #include diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index beef3c4cee6..29719ceab19 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -8,31 +8,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * 2002_Mar_26 gkh - * allowed driver to work properly if there is no tty assigned to a port - * (this happens for serial console devices.) - * - * 2001_Oct_06 gkh - * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it. - * - * 2001_Sep_19 gkh - * Added break support. - * - * 2001_Aug_30 gkh - * fixed oops in write_bulk_callback. - * - * 2001_Aug_28 gkh - * reworked buffer logic to be like other usb-serial drivers. Hopefully - * removing some reported problems. - * - * 2001_Jun_06 gkh - * finished porting to 2.4 format. - * */ #include diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 08f600327db..fde09fba879 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,7 +1,7 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) * @@ -9,316 +9,11 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * - * This driver was originally based on the ACM driver by Armin Fuerst (which was + * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (12/10/2002) gkh - * Split the ports off into their own struct device, and added a - * usb-serial bus driver. - * - * (11/19/2002) gkh - * removed a few #ifdefs for the generic code and cleaned up the failure - * logic in initialization. - * - * (10/02/2002) gkh - * moved the console code to console.c and out of this file. - * - * (06/05/2002) gkh - * moved location of startup() call in serial_probe() until after all - * of the port information and endpoints are initialized. This makes - * things easier for some drivers. - * - * (04/10/2002) gkh - * added serial_read_proc function which creates a - * /proc/tty/driver/usb-serial file. - * - * (03/27/2002) gkh - * Got USB serial console code working properly and merged into the main - * version of the tree. Thanks to Randy Dunlap for the initial version - * of this code, and for pushing me to finish it up. - * The USB serial console works with any usb serial driver device. - * - * (03/21/2002) gkh - * Moved all manipulation of port->open_count into the core. Now the - * individual driver's open and close functions are called only when the - * first open() and last close() is called. Making the drivers a bit - * smaller and simpler. - * Fixed a bug if a driver didn't have the owner field set. - * - * (02/26/2002) gkh - * Moved all locking into the main serial_* functions, instead of having - * the individual drivers have to grab the port semaphore. This should - * reduce races. - * Reworked the MOD_INC logic a bit to always increment and decrement, even - * if the generic driver is being used. - * - * (10/10/2001) gkh - * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to - * help prevent child drivers from accessing the device since it is now - * gone. - * - * (09/13/2001) gkh - * Moved generic driver initialize after we have registered with the USB - * core. Thanks to Randy Dunlap for pointing this problem out. - * - * (07/03/2001) gkh - * Fixed module paramater size. Thanks to John Brockmeyer for the pointer. - * Fixed vendor and product getting defined through the MODULE_PARM macro - * if the Generic driver wasn't compiled in. - * Fixed problem with generic_shutdown() not being called for drivers that - * don't have a shutdown() function. - * - * (06/06/2001) gkh - * added evil hack that is needed for the prolific pl2303 device due to the - * crazy way its endpoints are set up. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * 2001_02_05 gkh - * Fixed buffer overflows bug with the generic serial driver. Thanks to - * Todd Squires for fixing this. - * - * (01/10/2001) gkh - * Fixed bug where the generic serial adaptor grabbed _any_ device that was - * offered to it. - * - * (12/12/2000) gkh - * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and - * moved them to the serial_open and serial_close functions. - * Also fixed bug with there not being a MOD_DEC for the generic driver - * (thanks to Gary Brubaker for finding this.) - * - * (11/29/2000) gkh - * Small NULL pointer initialization cleanup which saves a bit of disk image - * - * (11/01/2000) Adam J. Richter - * instead of using idVendor/idProduct pairs, usb serial drivers - * now identify their hardware interest with usb_device_id tables, - * which they usually have anyhow for use with MODULE_DEVICE_TABLE. - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * Added locks for SMP safeness to generic driver - * Fixed the ability to open a generic device's port more than once. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * (07/03/2000) gkh - * Added more debugging to serial_ioctl call - * - * (06/25/2000) gkh - * Changed generic_write_bulk_callback to not call wake_up_interruptible - * directly, but to have port_softint do it at a safer time. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (05/22/2000) gkh - * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be - * removed from the individual device source files. - * - * (05/03/2000) gkh - * Added the Digi Acceleport driver from Al Borchers and Peter Berger. - * - * (05/02/2000) gkh - * Changed devfs and tty register code to work properly now. This was based on - * the ACM driver changes by Vojtech Pavlik. - * - * (04/27/2000) Ryan VanderBijl - * Put calls to *_paranoia_checks into one function. - * - * (04/23/2000) gkh - * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports. - * Moved when the startup code printed out the devices that are supported. - * - * (04/19/2000) gkh - * Added driver for ZyXEL omni.net lcd plus ISDN TA - * Made startup info message specify which drivers were compiled in. - * - * (04/03/2000) gkh - * Changed the probe process to remove the module unload races. - * Changed where the tty layer gets initialized to have devfs work nicer. - * Added initial devfs support. - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * - * (03/19/2000) gkh - * Fixed oops that could happen when device was removed while a program - * was talking to the device. - * Removed the static urbs and now all urbs are created and destroyed - * dynamically. - * Reworked the internal interface. Now everything is based on the - * usb_serial_port structure instead of the larger usb_serial structure. - * This fixes the bug that a multiport device could not have more than - * one port open at one time. - * - * (03/17/2000) gkh - * Added config option for debugging messages. - * Added patch for keyspan pda from Brian Warner. - * - * (03/06/2000) gkh - * Added the keyspan pda code from Brian Warner - * Moved a bunch of the port specific stuff into its own structure. This - * is in anticipation of the true multiport devices (there's a bug if you - * try to access more than one port of any multiport device right now) - * - * (02/21/2000) gkh - * Made it so that any serial devices only have to specify which functions - * they want to overload from the generic function calls (great, - * inheritance in C, in a driver, just what I wanted...) - * Added support for set_termios and ioctl function calls. No drivers take - * advantage of this yet. - * Removed the #ifdef MODULE, now there is no module specific code. - * Cleaned up a few comments in usb-serial.h that were wrong (thanks again - * to Miles Lott). - * Small fix to get_free_serial. - * - * (02/14/2000) gkh - * Removed the Belkin and Peracom functionality from the driver due to - * the lack of support from the vendor, and me not wanting people to - * accidenatly buy the device, expecting it to work with Linux. - * Added read_bulk_callback and write_bulk_callback to the type structure - * for the needs of the FTDI and WhiteHEAT driver. - * Changed all reverences to FTDI to FTDI_SIO at the request of Bill - * Ryder. - * Changed the output urb size back to the max endpoint size to make - * the ftdi_sio driver have it easier, and due to the fact that it didn't - * really increase the speed any. - * - * (02/11/2000) gkh - * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a - * patch from Miles Lott (milos@insync.net). - * Fixed bug with not restoring the minor range that a device grabs, if - * the startup function fails (thanks Miles for finding this). - * - * (02/05/2000) gkh - * Added initial framework for the Keyspan PDA serial converter so that - * Brian Warner has a place to put his code. - * Made the ezusb specific functions generic enough that different - * devices can use them (whiteheat and keyspan_pda both need them). - * Split out a whole bunch of structure and other stuff to a separate - * usb-serial.h file. - * Made the Visor connection messages a little more understandable, now - * that Miles Lott (milos@insync.net) has gotten the Generic channel to - * work. Also made them always show up in the log file. - * - * (01/25/2000) gkh - * Added initial framework for FTDI serial converter so that Bill Ryder - * has a place to put his code. - * Added the vendor specific info from Handspring. Now we can print out - * informational debug messages as well as understand what is happening. - * - * (01/23/2000) gkh - * Fixed problem of crash when trying to open a port that didn't have a - * device assigned to it. Made the minor node finding a little smarter, - * now it looks to find a continuous space for the new device. - * - * (01/21/2000) gkh - * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net) - * Fixed get_serial_by_minor which was all messed up for multi port - * devices. Fixed multi port problem for generic devices. Now the number - * of ports is determined by the number of bulk out endpoints for the - * generic device. - * - * (01/19/2000) gkh - * Removed lots of cruft that was around from the old (pre urb) driver - * interface. - * Made the serial_table dynamic. This should save lots of memory when - * the number of minor nodes goes up to 256. - * Added initial support for devices that have more than one port. - * Added more debugging comments for the Visor, and added a needed - * set_configuration call. - * - * (01/17/2000) gkh - * Fixed the WhiteHEAT firmware (my processing tool had a bug) - * and added new debug loader firmware for it. - * Removed the put_char function as it isn't really needed. - * Added visor startup commands as found by the Win98 dump. - * - * (01/13/2000) gkh - * Fixed the vendor id for the generic driver to the one I meant it to be. - * - * (01/12/2000) gkh - * Forget the version numbering...that's pretty useless... - * Made the driver able to be compiled so that the user can select which - * converter they want to use. This allows people who only want the Visor - * support to not pay the memory size price of the WhiteHEAT. - * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000) - * grabbed the root hub. Not good. - * - * version 0.4.0 (01/10/2000) gkh - * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT - * device. Added startup function to allow firmware to be downloaded to - * a device if it needs to be. - * Added firmware download logic to the WhiteHEAT device. - * Started to add #defines to split up the different drivers for potential - * configuration option. - * - * version 0.3.1 (12/30/99) gkh - * Fixed problems with urb for bulk out. - * Added initial support for multiple sets of endpoints. This enables - * the Handspring Visor to be attached successfully. Only the first - * bulk in / bulk out endpoint pair is being used right now. - * - * version 0.3.0 (12/27/99) gkh - * Added initial support for the Handspring Visor based on a patch from - * Miles Lott (milos@sneety.insync.net) - * Cleaned up the code a bunch and converted over to using urbs only. - * - * version 0.2.3 (12/21/99) gkh - * Added initial support for the Connect Tech WhiteHEAT converter. - * Incremented the number of ports in expectation of getting the - * WhiteHEAT to work properly (4 ports per connection). - * Added notification on insertion and removal of what port the - * device is/was connected to (and what kind of device it was). - * - * version 0.2.2 (12/16/99) gkh - * Changed major number to the new allocated number. We're legal now! - * - * version 0.2.1 (12/14/99) gkh - * Fixed bug that happens when device node is opened when there isn't a - * device attached to it. Thanks to marek@webdesign.no for noticing this. - * - * version 0.2.0 (11/10/99) gkh - * Split up internals to make it easier to add different types of serial - * converters to the code. - * Added a "generic" driver that gets it's vendor and product id - * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net) - * for the idea and sample code (from the usb scanner driver.) - * Cleared up any licensing questions by releasing it under the GNU GPL. - * - * version 0.1.2 (10/25/99) gkh - * Fixed bug in detecting device. - * - * version 0.1.1 (10/05/99) gkh - * Changed the major number to not conflict with anything else. - * - * version 0.1 (09/28/99) gkh - * Can recognize the two different devices and start up a read from - * device when asked to. Writes also work. No control signals yet, this - * all is vendor specific data (i.e. no spec), also no control for - * different baud rates or other bit settings. - * Currently we are using the same devid as the acm driver. This needs - * to change. - * */ #include diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 4ca5e0c0561..1cedc199950 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -1,53 +1,13 @@ /* * USB Serial Converter driver * - * Copyright (C) 1999 - 2004 + * Copyright (C) 1999 - 2005 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * - * See Documentation/usb/usb-serial.txt for more information on using this driver - * - * (03/26/2002) gkh - * removed the port->tty check from port_paranoia_check() due to serial - * consoles not having a tty device assigned to them. - * - * (12/03/2001) gkh - * removed active from the port structure. - * added documentation to the usb_serial_device_type structure - * - * (10/10/2001) gkh - * added vendor and product to serial structure. Needed to determine device - * owner when the device is disconnected. - * - * (05/30/2001) gkh - * added sem to port structure and removed port_lock - * - * (10/05/2000) gkh - * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help - * fix bug with urb->dev not being set properly, now that the usb core - * needs it. - * - * (09/11/2000) gkh - * Added usb_serial_debug_data function to help get rid of #DEBUG in the - * drivers. - * - * (08/28/2000) gkh - * Added port_lock to port structure. - * - * (08/08/2000) gkh - * Added open_count to port structure. - * - * (07/23/2000) gkh - * Added bulk_out_endpointAddress to port structure. - * - * (07/19/2000) gkh, pberger, and borchers - * Modifications to allow usb-serial drivers to be modules. - * - * */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 0ac0377e868..39ad0cab863 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -7,139 +7,10 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * the Free Software Foundation; either version 2 of the License. * * See Documentation/usb/usb-serial.txt for more information on using this driver * - * (06/03/2003) Judd Montgomery - * Added support for module parameter options for untested/unknown - * devices. - * - * (03/09/2003) gkh - * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl - * for the information. - * - * (03/05/2003) gkh - * Think Treo support is now working. - * - * (04/03/2002) gkh - * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI - * for the information. - * - * (03/27/2002) gkh - * Removed assumptions that port->tty was always valid (is not true - * for usb serial console devices.) - * - * (03/23/2002) gkh - * Added support for the Palm i705 device, thanks to Thomas Riemer - * for the information. - * - * (03/21/2002) gkh - * Added support for the Palm m130 device, thanks to Udo Eisenbarth - * for the information. - * - * (02/27/2002) gkh - * Reworked the urb handling logic. We have no more pool, but dynamically - * allocate the urb and the transfer buffer on the fly. In testing this - * does not incure any measurable overhead. This also relies on the fact - * that we have proper reference counting logic for urbs. - * - * (02/21/2002) SilaS - * Added initial support for the Palm m515 devices. - * - * (02/14/2002) gkh - * Added support for the Clie S-360 device. - * - * (12/18/2001) gkh - * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand - * for the patch. - * - * (11/11/2001) gkh - * Added support for the m125 devices, and added check to prevent oopses - * for Clié devices that lie about the number of ports they have. - * - * (08/30/2001) gkh - * Added support for the Clie devices, both the 3.5 and 4.0 os versions. - * Many thanks to Daniel Burke, and Bryan Payne for helping with this. - * - * (08/23/2001) gkh - * fixed a few potential bugs pointed out by Oliver Neukum. - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of problems. - * - * (05/28/2000) gkh - * Added initial support for the Palm m500 and Palm m505 devices. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/21/2000) gkh - * Added write_room and chars_in_buffer, as they were previously using the - * generic driver versions which is all wrong now that we are using an urb - * pool. Thanks to Wolfgang Grandegger for pointing this out to me. - * Removed count assignment in the write function, which was not needed anymore - * either. Thanks to Al Borchers for pointing this out. - * - * (12/12/2000) gkh - * Moved MOD_DEC to end of visor_close to be nicer, as the final write - * message can sleep. - * - * (11/12/2000) gkh - * Fixed bug with data being dropped on the floor by forcing tty->low_latency - * to be on. Hopefully this fixes the OHCI issue! - * - * (11/01/2000) Adam J. Richter - * usb_device_id table support - * - * (10/05/2000) gkh - * Fixed bug with urb->dev not being set properly, now that the usb - * core needs it. - * - * (09/11/2000) gkh - * Got rid of always calling kmalloc for every urb we wrote out to the - * device. - * Added visor_read_callback so we can keep track of bytes in and out for - * those people who like to know the speed of their device. - * Removed DEBUG #ifdefs with call to usb_serial_debug_data - * - * (09/06/2000) gkh - * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ - * the host controller drivers set urb->dev = NULL when the urb is finished. - * - * (08/28/2000) gkh - * Added locks for SMP safeness. - * - * (08/08/2000) gkh - * Fixed endian problem in visor_startup. - * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more - * than once. - * - * (07/23/2000) gkh - * Added pool of write urbs to speed up transfers to the visor. - * - * (07/19/2000) gkh - * Added module_init and module_exit functions to handle the fact that this - * driver is a loadable module now. - * - * (07/03/2000) gkh - * Added visor_set_ioctl and visor_set_termios functions (they don't do much - * of anything, but are good for debugging.) - * - * (06/25/2000) gkh - * Fixed bug in visor_unthrottle that should help with the disconnect in PPP - * bug that people have been reporting. - * - * (06/23/2000) gkh - * Cleaned up debugging statements in a quest to find UHCI timeout bug. - * - * (04/27/2000) Ryan VanderBijl - * Fixed memory leak in visor_close - * - * (03/26/2000) gkh - * Split driver up into device specific pieces. - * */ #include -- cgit v1.2.3-70-g09d2 From 269bda1c123c7caf88e1deb2264f9086f0344192 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: move name to driver structure This fixes up a lot of problems in sysfs with some of the usb serial drivers, they had incorrect driver names. Also saves a tiny ammount of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/airprime.c | 2 +- drivers/usb/serial/belkin_sa.c | 4 ++-- drivers/usb/serial/bus.c | 8 ++------ drivers/usb/serial/cp2101.c | 4 ++-- drivers/usb/serial/cyberjack.c | 4 ++-- drivers/usb/serial/cypress_m8.c | 8 ++++---- drivers/usb/serial/digi_acceleport.c | 12 ++++++------ drivers/usb/serial/empeg.c | 2 +- drivers/usb/serial/ftdi_sio.c | 4 ++-- drivers/usb/serial/garmin_gps.c | 4 ++-- drivers/usb/serial/generic.c | 3 +-- drivers/usb/serial/hp4x.c | 4 ++-- drivers/usb/serial/io_tables.h | 12 ++++++------ drivers/usb/serial/io_ti.c | 12 ++++++------ drivers/usb/serial/ipaq.c | 3 ++- drivers/usb/serial/ipw.c | 4 ++-- drivers/usb/serial/ir-usb.c | 3 ++- drivers/usb/serial/keyspan.h | 16 ++++++++-------- drivers/usb/serial/keyspan_pda.c | 12 ++++++------ drivers/usb/serial/kl5kusb105.c | 4 ++-- drivers/usb/serial/kobil_sct.c | 3 ++- drivers/usb/serial/mct_u232.c | 4 ++-- drivers/usb/serial/omninet.c | 4 ++-- drivers/usb/serial/option.c | 4 ++-- drivers/usb/serial/pl2303.c | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 10 ++++++---- drivers/usb/serial/usb-serial.c | 15 +++++++++------ drivers/usb/serial/usb-serial.h | 12 +++++------- drivers/usb/serial/visor.c | 18 +++++++++--------- drivers/usb/serial/whiteheat.c | 30 +++++++++++++++--------------- 31 files changed, 115 insertions(+), 114 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index fbc5b9b4474..1f29d883732 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -33,8 +33,8 @@ static struct usb_driver airprime_driver = { static struct usb_serial_driver airprime_device = { .driver = { .owner = THIS_MODULE, + .name = "airprime", }, - .name = "airprime", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 4878961a090..84bc0ee4f06 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -124,9 +124,9 @@ static struct usb_driver belkin_driver = { static struct usb_serial_driver belkin_device = { .driver = { .owner = THIS_MODULE, + .name = "belkin", }, - .name = "Belkin / Peracom / GoHubs USB Serial Adapter", - .short_name = "belkin", + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", .id_table = id_table_combined, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index b8364a8de7d..664139afcfa 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev) tty_register_device (usb_serial_tty_driver, minor, dev); dev_info(&port->serial->dev->dev, "%s converter now attached to ttyUSB%d\n", - driver->name, minor); + driver->description, minor); exit: return retval; @@ -104,7 +104,7 @@ exit: minor = port->number; tty_unregister_device (usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", - driver->name, minor); + driver->description, minor); return retval; } @@ -113,10 +113,6 @@ int usb_serial_bus_register(struct usb_serial_driver *driver) { int retval; - if (driver->short_name) - driver->driver.name = (char *)driver->short_name; - else - driver->driver.name = (char *)driver->name; driver->driver.bus = &usb_serial_bus_type; driver->driver.probe = usb_serial_device_probe; driver->driver.remove = usb_serial_device_remove; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 81dd720a122..c5334dd89b1 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,7 @@ MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { .owner = THIS_MODULE, - .name = "CP2101", + .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -76,8 +76,8 @@ static struct usb_driver cp2101_driver = { static struct usb_serial_driver cp2101_device = { .driver = { .owner = THIS_MODULE, + .name = "cp2101", }, - .name = "CP2101", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 0, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 3441bad74f7..e581e4ae848 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -86,9 +86,9 @@ static struct usb_driver cyberjack_driver = { static struct usb_serial_driver cyberjack_device = { .driver = { .owner = THIS_MODULE, + .name = "cyberjack", }, - .name = "Reiner SCT Cyberjack USB card reader", - .short_name = "cyberjack", + .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index b4069af4d56..af9290ed257 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -179,9 +179,9 @@ static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigne static struct usb_serial_driver cypress_earthmate_device = { .driver = { .owner = THIS_MODULE, + .name = "earthmate", }, - .name = "DeLorme Earthmate USB", - .short_name = "earthmate", + .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_interrupt_in = 1, .num_interrupt_out = 1, @@ -208,9 +208,9 @@ static struct usb_serial_driver cypress_earthmate_device = { static struct usb_serial_driver cypress_hidcom_device = { .driver = { .owner = THIS_MODULE, + .name = "cyphidcom", }, - .name = "HID->COM RS232 Adapter", - .short_name = "cyphidcom", + .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_interrupt_in = 1, .num_interrupt_out = 1, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index be9b495d249..dc74644a603 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -505,10 +505,10 @@ static struct usb_driver digi_driver = { static struct usb_serial_driver digi_acceleport_2_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_2", }, - .name = "Digi 2 port USB adapter", - .short_name = "digi_2", + .description = "Digi 2 port USB adapter", .id_table = id_table_2, .num_interrupt_in = 0, .num_bulk_in = 4, @@ -534,10 +534,10 @@ static struct usb_serial_driver digi_acceleport_2_device = { static struct usb_serial_driver digi_acceleport_4_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "digi_4", }, - .name = "Digi 4 port USB adapter", - .short_name = "digi_4", + .description = "Digi 4 port USB adapter", .id_table = id_table_4, .num_interrupt_in = 0, .num_bulk_in = 5, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 3e6c4ba7667..0b0546dcc7b 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -115,8 +115,8 @@ static struct usb_driver empeg_driver = { static struct usb_serial_driver empeg_device = { .driver = { .owner = THIS_MODULE, + .name = "empeg", }, - .name = "Empeg", .id_table = id_table, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9d945de0aca..77d54ac39a0 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -565,9 +565,9 @@ static __u32 ftdi_232bm_baud_to_divisor (int baud); static struct usb_serial_driver ftdi_sio_device = { .driver = { .owner = THIS_MODULE, + .name = "ftdi_sio", }, - .name = "FTDI USB Serial Device", - .short_name = "ftdi_sio", + .description = "FTDI USB Serial Device", .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3fd98c00cd6..35820bda7ae 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1472,9 +1472,9 @@ static void garmin_shutdown (struct usb_serial *serial) static struct usb_serial_driver garmin_device = { .driver = { .owner = THIS_MODULE, + .name = "garmin_gps", }, - .name = "Garmin GPS usb/tty", - .short_name = "garmin_gps", + .description = "Garmin GPS usb/tty", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 779bea0c624..8909208f506 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -39,9 +39,8 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ struct usb_serial_driver usb_serial_generic_device = { .driver = { .owner = THIS_MODULE, + .name = "generic", }, - .name = "Generic", - .short_name = "generic", .id_table = generic_device_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 4f3cbc08c4e..8eadfb70560 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -38,7 +38,7 @@ MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { .owner = THIS_MODULE, - .name = "HP4X", + .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, @@ -47,8 +47,8 @@ static struct usb_driver hp49gp_driver = { static struct usb_serial_driver hp49gp_device = { .driver = { .owner = THIS_MODULE, + .name = "hp4X", }, - .name = "HP4X", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 28fb0d42a16..fad561c04c7 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -78,9 +78,9 @@ MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_serial_driver edgeport_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_2", }, - .name = "Edgeport 2 port adapter", - .short_name = "edgeport_2", + .description = "Edgeport 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -108,9 +108,9 @@ static struct usb_serial_driver edgeport_2port_device = { static struct usb_serial_driver edgeport_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_4", }, - .name = "Edgeport 4 port adapter", - .short_name = "edgeport_4", + .description = "Edgeport 4 port adapter", .id_table = edgeport_4port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -138,9 +138,9 @@ static struct usb_serial_driver edgeport_4port_device = { static struct usb_serial_driver edgeport_8port_device = { .driver = { .owner = THIS_MODULE, + .name = "edgeport_8", }, - .name = "Edgeport 8 port adapter", - .short_name = "edgeport_8", + .description = "Edgeport 8 port adapter", .id_table = edgeport_8port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 74228a07264..832b6d6734c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2984,10 +2984,10 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf, static struct usb_serial_driver edgeport_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_1", }, - .name = "Edgeport TI 1 port adapter", - .short_name = "edgeport_ti_1", + .description = "Edgeport TI 1 port adapter", .id_table = edgeport_1port_id_table, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -3014,10 +3014,10 @@ static struct usb_serial_driver edgeport_1port_device = { static struct usb_serial_driver edgeport_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "edgeport_ti_2", }, - .name = "Edgeport TI 2 port adapter", - .short_name = "edgeport_ti_2", + .description = "Edgeport TI 2 port adapter", .id_table = edgeport_2port_id_table, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 9aedfb91b20..1abaebe6dbc 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -550,8 +550,9 @@ static struct usb_driver ipaq_driver = { static struct usb_serial_driver ipaq_device = { .driver = { .owner = THIS_MODULE, + .name = "ipaq", }, - .name = "PocketPC PDA", + .description = "PocketPC PDA", .id_table = ipaq_id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 2ba69623ac0..a02fada8536 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -446,9 +446,9 @@ static int ipw_disconnect(struct usb_serial_port *port) static struct usb_serial_driver ipw_device = { .driver = { .owner = THIS_MODULE, + .name = "ipw", }, - .name = "IPWireless converter", - .short_name = "ipw", + .description = "IPWireless converter", .id_table = usb_ipw_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index bf079059819..19f329e9bdc 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -136,8 +136,9 @@ static struct usb_driver ir_driver = { static struct usb_serial_driver ir_device = { .driver = { .owner = THIS_MODULE, + .name = "ir-usb", }, - .name = "IR Dongle", + .description = "IR Dongle", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 124d46e76a2..5cfc13b5e56 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -573,9 +573,9 @@ static struct usb_device_id keyspan_4port_ids[] = { static struct usb_serial_driver keyspan_pre_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_no_firm", }, - .name = "Keyspan - (without firmware)", - .short_name = "keyspan_no_firm", + .description = "Keyspan - (without firmware)", .id_table = keyspan_pre_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -587,9 +587,9 @@ static struct usb_serial_driver keyspan_pre_device = { static struct usb_serial_driver keyspan_1port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_1", }, - .name = "Keyspan 1 port adapter", - .short_name = "keyspan_1", + .description = "Keyspan 1 port adapter", .id_table = keyspan_1port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -614,9 +614,9 @@ static struct usb_serial_driver keyspan_1port_device = { static struct usb_serial_driver keyspan_2port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_2", }, - .name = "Keyspan 2 port adapter", - .short_name = "keyspan_2", + .description = "Keyspan 2 port adapter", .id_table = keyspan_2port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -641,9 +641,9 @@ static struct usb_serial_driver keyspan_2port_device = { static struct usb_serial_driver keyspan_4port_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_4", }, - .name = "Keyspan 4 port adapter", - .short_name = "keyspan_4", + .description = "Keyspan 4 port adapter", .id_table = keyspan_4port_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 5, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 389b7833e3a..cd4f48bd83b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -786,9 +786,9 @@ static void keyspan_pda_shutdown (struct usb_serial *serial) static struct usb_serial_driver keyspan_pda_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda_pre", }, - .name = "Keyspan PDA - (prerenumeration)", - .short_name = "keyspan_pda_pre", + .description = "Keyspan PDA - (prerenumeration)", .id_table = id_table_fake, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -802,9 +802,9 @@ static struct usb_serial_driver keyspan_pda_fake_device = { static struct usb_serial_driver xircom_pgs_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "xircom_no_firm", }, - .name = "Xircom / Entregra PGS - (prerenumeration)", - .short_name = "xircom_no_firm", + .description = "Xircom / Entregra PGS - (prerenumeration)", .id_table = id_table_fake_xircom, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -817,9 +817,9 @@ static struct usb_serial_driver xircom_pgs_fake_device = { static struct usb_serial_driver keyspan_pda_device = { .driver = { .owner = THIS_MODULE, + .name = "keyspan_pda", }, - .name = "Keyspan PDA", - .short_name = "keyspan_pda", + .description = "Keyspan PDA", .id_table = id_table_std, .num_interrupt_in = 1, .num_bulk_in = 0, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 586108ce789..a8951c0fd02 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -126,9 +126,9 @@ static struct usb_driver kl5kusb105d_driver = { static struct usb_serial_driver kl5kusb105d_device = { .driver = { .owner = THIS_MODULE, + .name = "kl5kusb105d", }, - .name = "KL5KUSB105D / PalmConnect", - .short_name = "kl5kusb105d", + .description = "KL5KUSB105D / PalmConnect", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index a9578e05b22..9456dd9dd13 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -108,8 +108,9 @@ static struct usb_driver kobil_driver = { static struct usb_serial_driver kobil_device = { .driver = { .owner = THIS_MODULE, + .name = "kobil", }, - .name = "KOBIL USB smart card terminal", + .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 0, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 7dcf91c5f83..ca5dbadb9b7 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -135,9 +135,9 @@ static struct usb_driver mct_u232_driver = { static struct usb_serial_driver mct_u232_device = { .driver = { .owner = THIS_MODULE, + .name = "mct_u232", }, - .name = "MCT U232", - .short_name = "mct_u232", + .description = "MCT U232", .id_table = id_table_combined, .num_interrupt_in = 2, .num_bulk_in = 0, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index f6327cc1b2e..3caf97072ac 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -91,9 +91,9 @@ static struct usb_driver omninet_driver = { static struct usb_serial_driver zyxel_omninet_device = { .driver = { .owner = THIS_MODULE, + .name = "omninet", }, - .name = "ZyXEL - omni.net lcd plus usb", - .short_name = "omninet", + .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_interrupt_in = 1, .num_bulk_in = 1, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a2b5adf3486..7716000045b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -108,9 +108,9 @@ static struct usb_driver option_driver = { static struct usb_serial_driver option_3port_device = { .driver = { .owner = THIS_MODULE, + .name = "option", }, - .name = "Option 3G data card", - .short_name = "option", + .description = "Option 3G data card", .id_table = option_ids, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 29719ceab19..f8f4e93e8c0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -157,8 +157,8 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf, static struct usb_serial_driver pl2303_device = { .driver = { .owner = THIS_MODULE, + .name = "pl2303", }, - .name = "PL-2303", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 1, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 42a86ab689f..c22bdc0c4df 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -400,8 +400,8 @@ static int safe_startup (struct usb_serial *serial) static struct usb_serial_driver safe_device = { .driver = { .owner = THIS_MODULE, + .name = "safe_serial", }, - .name = "Safe", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index eab8a6de092..205dbf7201d 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -257,9 +257,10 @@ static struct usb_driver ti_usb_driver = { static struct usb_serial_driver ti_1port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", }, - .name = "TI USB 3410 1 port adapter", + .description = "TI USB 3410 1 port adapter", .id_table = ti_id_table_3410, .num_interrupt_in = 1, .num_bulk_in = 1, @@ -286,9 +287,10 @@ static struct usb_serial_driver ti_1port_device = { static struct usb_serial_driver ti_2port_device = { .driver = { - .owner = THIS_MODULE, + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", }, - .name = "TI USB 5052 2 port adapter", + .description = "TI USB 5052 2 port adapter", .id_table = ti_id_table_5052, .num_interrupt_in = 1, .num_bulk_in = 2, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index fde09fba879..13f6592be68 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -122,7 +122,7 @@ static void destroy_serial(struct kref *kref) serial = to_usb_serial(kref); - dbg ("%s - %s", __FUNCTION__, serial->type->name); + dbg("%s - %s", __FUNCTION__, serial->type->description); serial->type->shutdown(serial); @@ -415,7 +415,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, "%d:", i); if (serial->type->driver.owner) length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner)); - length += sprintf (page+length, " name:\"%s\"", serial->type->name); + length += sprintf (page+length, " name:\"%s\"", serial->type->description); length += sprintf (page+length, " vendor:%04x product:%04x", le16_to_cpu(serial->dev->descriptor.idVendor), le16_to_cpu(serial->dev->descriptor.idProduct)); @@ -687,7 +687,7 @@ int usb_serial_probe(struct usb_interface *interface, #endif /* found all that we need */ - dev_info(&interface->dev, "%s converter detected\n", type->name); + dev_info(&interface->dev, "%s converter detected\n", type->description); #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { @@ -1088,16 +1088,19 @@ int usb_serial_register(struct usb_serial_driver *driver) fixup_generic(driver); + if (!driver->description) + driver->description = driver->driver.name; + /* Add this device to our list of devices */ list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); if (retval) { - err("problem %d when registering driver %s", retval, driver->name); + err("problem %d when registering driver %s", retval, driver->description); list_del(&driver->driver_list); } else - info("USB Serial support registered for %s", driver->name); + info("USB Serial support registered for %s", driver->description); return retval; } @@ -1105,7 +1108,7 @@ int usb_serial_register(struct usb_serial_driver *driver) void usb_serial_deregister(struct usb_serial_driver *device) { - info("USB Serial deregistering driver %s", device->name); + info("USB Serial deregistering driver %s", device->description); list_del(&device->driver_list); usb_serial_bus_deregister(device); } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 1cedc199950..238a5a871ed 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -149,11 +149,8 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) /** * usb_serial_driver - describes a usb serial driver - * @name: pointer to a string that describes this driver. This string used + * @description: pointer to a string that describes this driver. This string used * in the syslog messages when a device is inserted or removed. - * @short_name: a pointer to a string that describes this driver in - * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface - * to describe the driver. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_interrupt_in: the number of interrupt in endpoints this device will @@ -187,11 +184,12 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data) * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. - * + * The driver.name field should be set to the name of this driver (remember + * it will show up in sysfs, so it needs to be short and to the point. + * Useing the module name is a good idea.) */ struct usb_serial_driver { - char *name; - char *short_name; + const char *description; const struct usb_device_id *id_table; char num_interrupt_in; char num_interrupt_out; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 39ad0cab863..baa2acb28bd 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -185,9 +185,9 @@ static struct usb_driver visor_driver = { static struct usb_serial_driver handspring_device = { .driver = { .owner = THIS_MODULE, + .name = "visor", }, - .name = "Handspring Visor / Palm OS", - .short_name = "visor", + .description = "Handspring Visor / Palm OS", .id_table = id_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -215,9 +215,9 @@ static struct usb_serial_driver handspring_device = { static struct usb_serial_driver clie_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_5", }, - .name = "Sony Clie 5.0", - .short_name = "clie_5", + .description = "Sony Clie 5.0", .id_table = clie_id_5_table, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = 2, @@ -245,9 +245,9 @@ static struct usb_serial_driver clie_5_device = { static struct usb_serial_driver clie_3_5_device = { .driver = { .owner = THIS_MODULE, + .name = "clie_3.5", }, - .name = "Sony Clie 3.5", - .short_name = "clie_3.5", + .description = "Sony Clie 3.5", .id_table = clie_id_3_5_table, .num_interrupt_in = 0, .num_bulk_in = 1, @@ -659,7 +659,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i break; } dev_info(dev, "%s: port %d, is for %s use\n", - serial->type->name, + serial->type->description, connection_info->connections[i].port, string); } } @@ -668,11 +668,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i */ if (num_ports == 0 || num_ports > 2) { dev_warn (dev, "%s: No valid connect info available\n", - serial->type->name); + serial->type->description); num_ports = 2; } - dev_info(dev, "%s: Number of ports: %d\n", serial->type->name, + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, num_ports); /* diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index fb95a34a1cf..18c3183be76 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -159,9 +159,9 @@ static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs); static struct usb_serial_driver whiteheat_fake_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheatnofirm", }, - .name = "Connect Tech - WhiteHEAT - (prerenumeration)", - .short_name = "whiteheatnofirm", + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", .id_table = id_table_prerenumeration, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -174,9 +174,9 @@ static struct usb_serial_driver whiteheat_fake_device = { static struct usb_serial_driver whiteheat_device = { .driver = { .owner = THIS_MODULE, + .name = "whiteheat", }, - .name = "Connect Tech - WhiteHEAT", - .short_name = "whiteheat", + .description = "Connect Tech - WhiteHEAT", .id_table = id_table_std, .num_interrupt_in = NUM_DONT_CARE, .num_bulk_in = NUM_DONT_CARE, @@ -386,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't send command [%d]", serial->type->name, ret); + err("%s: Couldn't send command [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(command)) { - err("%s: Send command incomplete [%d]", serial->type->name, alen); + err("%s: Send command incomplete [%d]", serial->type->description, alen); goto no_firmware; } @@ -398,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial) usb_clear_halt(serial->dev, pipe); ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); if (ret) { - err("%s: Couldn't get results [%d]", serial->type->name, ret); + err("%s: Couldn't get results [%d]", serial->type->description, ret); goto no_firmware; } else if (alen != sizeof(result)) { - err("%s: Get results incomplete [%d]", serial->type->name, alen); + err("%s: Get results incomplete [%d]", serial->type->description, alen); goto no_firmware; } else if (result[0] != command[0]) { - err("%s: Command failed [%d]", serial->type->name, result[0]); + err("%s: Command failed [%d]", serial->type->description, result[0]); goto no_firmware; } hw_info = (struct whiteheat_hw_info *)&result[1]; - info("%s: Driver %s: Firmware v%d.%02d", serial->type->name, + info("%s: Driver %s: Firmware v%d.%02d", serial->type->description, DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev); for (i = 0; i < serial->num_ports; i++) { @@ -418,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial) info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL); if (info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_private; } @@ -488,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial) command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL); if (command_info == NULL) { - err("%s: Out of memory for port structures\n", serial->type->name); + err("%s: Out of memory for port structures\n", serial->type->description); goto no_command_private; } @@ -505,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial) no_firmware: /* Firmware likely not running */ - err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name); - err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name); - err("%s: please contact support@connecttech.com\n", serial->type->name); + err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description); + err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description); + err("%s: please contact support@connecttech.com\n", serial->type->description); return -ENODEV; no_command_private: -- cgit v1.2.3-70-g09d2 From 17a882fc0c91477b2582a6dfd4ca93ae7eb58cd3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB Serial: remove driver version from a few drivers These numbers are pointless, as they have not been changed in _years_, so we should just remove them to stop pretending there is an actual "version number" for these drivers. This should also help reduce confusion when people try to ask for support of a specific driver version, as there has been no way to tell what they are talking about. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 4 +--- drivers/usb/serial/usb-serial.c | 6 ++---- drivers/usb/serial/visor.c | 3 +-- 3 files changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index f8f4e93e8c0..165c119bf10 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -34,7 +34,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver" static int debug; @@ -1176,7 +1175,7 @@ static int __init pl2303_init (void) retval = usb_register(&pl2303_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: usb_serial_deregister(&pl2303_device); @@ -1196,7 +1195,6 @@ module_init(pl2303_init); module_exit(pl2303_exit); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 13f6592be68..0c4881d18cd 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -37,7 +37,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.0" #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/" #define DRIVER_DESC "USB Serial Driver core" @@ -406,7 +405,7 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int char tmp[40]; dbg("%s", __FUNCTION__); - length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION); + length += sprintf (page, "usbserinfo:1.0 driver:2.0\n"); for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) { serial = usb_serial_get_by_index(i); if (serial == NULL) @@ -1025,7 +1024,7 @@ static int __init usb_serial_init(void) goto exit_generic; } - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return result; @@ -1127,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint); /* Module information */ MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); -MODULE_VERSION( DRIVER_VERSION ); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index baa2acb28bd..a473c1c3455 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -32,7 +32,6 @@ /* * Version Information */ -#define DRIVER_VERSION "v2.1" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" @@ -1002,7 +1001,7 @@ static int __init visor_init (void) retval = usb_register(&visor_driver); if (retval) goto failed_usb_register; - info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_DESC); return 0; failed_usb_register: -- cgit v1.2.3-70-g09d2 From eb3c5ed8617d0aa67648cb7d1a486d14099129f2 Mon Sep 17 00:00:00 2001 From: David Eriksson Date: Tue, 18 Oct 2005 20:12:24 +0200 Subject: [PATCH] USB: Improving the set of vendor/product IDs in the ipaq driver This is a patch improving the set of vendor/product IDs used in the "ipaq" USB serial device driver. The patch size is because I sorted the ids this time, forgot about that last time. Changes: - Added vendor/product identifiers for Psion Teklogix devices - Restored Microsoft's identifier pair 045e/00ce - Sorted list of vendor/product identifiers Signed-off-by: David Eriksson Signed-off-by: Ganesh Varadarajan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 238 +++++++++++++++++++++++----------------------- 1 file changed, 121 insertions(+), 117 deletions(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 1abaebe6dbc..d5d06648810 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port); static struct usb_device_id ipaq_id_table [] = { /* The first entry is a placeholder for the insmod-specified device */ { USB_DEVICE(0x049F, 0x0003) }, - { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ - { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ - { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ - { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ - { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ - { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ - { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ - { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ - { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ - { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ @@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ - { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ + { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ + { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */ { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ @@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ - { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ - { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ + { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ + { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ + { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ + { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ + { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ + { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ + { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ + { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ + { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ + { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ + { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ + { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ + { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ + { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ + { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ + { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ + { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ + { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ + { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ + { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ + { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ + { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ + { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ + { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ + { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ + { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ + { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ + { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ + { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ + { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ + { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ + { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ + { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ - { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ + { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ + { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ + { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ + { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ + { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ + { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ + { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ @@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ - { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ - { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ - { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ - { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ - { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ - { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ - { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ - { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ - { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ - { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ - { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ - { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ + { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ + { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ + { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ - { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ - { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ - { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ - { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ - { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ - { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ - { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ - { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ - { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ - { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ - { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ - { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ - { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ - { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ - { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */ + { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */ + { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */ + { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ + { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ + { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ + { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ + { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ + { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ + { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ + { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ + { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ - { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ - { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ - { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ - { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ + { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ + { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ + { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ + { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ - { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ - { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ - { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ - { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ - { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ - { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ - { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ - { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ - { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ - { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ - { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ - { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ - { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ - { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ - { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ - { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ - { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ - { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ - { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ - { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ - { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ - { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ - { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ - { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ - { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ - { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ - { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ - { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ - { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ - { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ - { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ - { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ - { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ - { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ - { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ - { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ - { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ - { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ { } /* Terminating entry */ }; -- cgit v1.2.3-70-g09d2 From bde621854f1958a6000834c7c089b528118e5a9a Mon Sep 17 00:00:00 2001 From: Martin Hagelin Date: Wed, 26 Oct 2005 21:10:41 +0200 Subject: [PATCH] USB: add new device id to ftdi_sio module This is a patch to get the ELV FHZ1000 Home Automation control device to work with Linux. The patch adds a new device ID to the ftdi_sio driver. It is for kernel version 2.6.13.4. Signed-off-by: Martin Hagelin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 77d54ac39a0..61204bf7cd7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -412,6 +412,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, /* * These will probably use user-space drivers. Uncomment them if * you need them or use the user-specified vendor/product module @@ -429,7 +430,6 @@ static struct usb_device_id id_table_combined [] = { /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */ - /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */ /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */ -- cgit v1.2.3-70-g09d2 From 50260b69bbec383058875de26dbde28b1a6f8d00 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 20 Jun 2005 21:15:16 -0700 Subject: [PATCH] USB: add nokia_dku2 driver This driver comes from the gnokii project. Was further cleaned up by me to match recent usb-serial core changes. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 9 +++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/nokia_dku2.c | 142 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 152 insertions(+) create mode 100644 drivers/usb/serial/nokia_dku2.c (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9438909e87a..7b5e8e4ee2b 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. +config USB_SERIAL_NOKIA_DKU2 + tristate "USB Nokia DKU2 Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Nokia DKU2 device. + + To compile this driver as a module, choose M here: the + module will be called nokia_dku2. + config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 6c7cdcc99a9..55fd461793b 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c new file mode 100644 index 00000000000..fad01bef3a6 --- /dev/null +++ b/drivers/usb/serial/nokia_dku2.c @@ -0,0 +1,142 @@ +/* + * Nokia DKU2 USB driver + * + * Copyright (C) 2004 + * Author: C Kemp + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * 20.09.2005 - Matthias Blaesing + * Added short name to device structure to make driver load into kernel 2.6.13 + * + * 20.09.2005 - Matthias Blaesing + * Added usb_deregister to exit code - to allow remove and reinsert of module + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "usb-serial.h" + + +#define NOKIA_VENDOR_ID 0x0421 +#define NOKIA7600_PRODUCT_ID 0x0400 +#define NOKIA6230_PRODUCT_ID 0x040f +#define NOKIA6170_PRODUCT_ID 0x0416 +#define NOKIA6670_PRODUCT_ID 0x041d +#define NOKIA6680_PRODUCT_ID 0x041e +#define NOKIA6230i_PRODUCT_ID 0x0428 + +#define NOKIA_AT_PORT 0x82 +#define NOKIA_FBUS_PORT 0x86 + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.2" +#define DRIVER_AUTHOR "C Kemp" +#define DRIVER_DESC "Nokia DKU2 Driver" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* The only thing which makes this device different from a generic + * device is that we have to set an alternative configuration to make + * the relevant endpoints available. In 2.6 this is really easy... */ +static int nokia_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = -ENODEV; + + if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { + /* the AT port */ + dev_info(&serial->dev->dev, "Nokia AT Port:\n"); + retval = 0; + } else if (serial->interface->num_altsetting == 2 && + serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { + /* the FBUS port */ + dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); + usb_set_interface(serial->dev, 10, 1); + retval = 0; + } + + return retval; +} + +static struct usb_driver nokia_driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static struct usb_serial_driver nokia_serial_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "nokia_dku2", + }, + .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", + .id_table = id_table, + .num_interrupt_in = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_ports = 1, + .probe = nokia_probe, +}; + +static int __init nokia_init(void) +{ + int retval; + + retval = usb_serial_register(&nokia_serial_driver); + if (retval) + return retval; + + retval = usb_register(&nokia_driver); + if (retval) { + usb_serial_deregister(&nokia_serial_driver); + return retval; + } + + info(DRIVER_VERSION " " DRIVER_AUTHOR); + info(DRIVER_DESC); + + return retval; +} + +static void __exit nokia_exit(void) +{ + usb_deregister(&nokia_driver); + usb_serial_deregister(&nokia_serial_driver); +} + +module_init(nokia_init); +module_exit(nokia_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2