From a4e628328ec60873fec9d506d682155391f589ce Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Thu, 28 Jul 2005 14:50:29 -0700 Subject: [PATCH] USB Storage: wedge SCSI revision at 2 for usb-storage devices This patch started life as as479b, and has been rediffed. Please note the order of submission of this latest patch series -- even tho this has an older original number, it is the last patch I'll be sending today. This patch changes the reported SCSI revision level to 2 for all disk-type devices. This is needed in a few cases because the device reports a level of 3 or higher but then crashes when given a REPORT LUNS command (for which support is supposed to be mandatory at those levels). This shouldn't harm us, since it only matters for sparse LUNs and we have separate ways of coping with that. Signed-off-by: Alan Stern Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/usb/storage/scsiglue.c') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index af294bb68c3..d34dc9f417f 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -156,6 +156,14 @@ static int slave_configure(struct scsi_device *sdev) if (us->flags & US_FL_FIX_CAPACITY) sdev->fix_capacity = 1; + /* Some devices report a SCSI revision level above 2 but are + * unable to handle the REPORT LUNS command (for which + * support is mandatory at level 3). Since we already have + * a Get-Max-LUN request, we won't lose much by setting the + * revision level down to 2. The only devices that would be + * affected are those with sparse LUNs. */ + sdev->scsi_level = SCSI_2; + /* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable * Hardware Error) when any low-level error occurs, * recoverable or not. Setting this flag tells the SCSI -- cgit v1.2.3-70-g09d2