From 4186ecf8ad16dd05759a09594de6a87e48759ba6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 11 Jan 2006 15:55:29 +0100 Subject: [PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 9 +++++---- drivers/usb/storage/usb.c | 25 +++++++++++++------------ drivers/usb/storage/usb.h | 5 +++-- 3 files changed, 21 insertions(+), 18 deletions(-) (limited to 'drivers/usb/storage') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 4ef5527028c..5f11e19eaae 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -47,6 +47,7 @@ #include #include +#include #include #include @@ -271,9 +272,9 @@ static int device_reset(struct scsi_cmnd *srb) US_DEBUGP("%s called\n", __FUNCTION__); /* lock the device pointers and do the reset */ - down(&(us->dev_semaphore)); + mutex_lock(&(us->dev_mutex)); result = us->transport_reset(us); - up(&(us->dev_semaphore)); + mutex_unlock(&us->dev_mutex); return result < 0 ? FAILED : SUCCESS; } @@ -286,9 +287,9 @@ static int bus_reset(struct scsi_cmnd *srb) US_DEBUGP("%s called\n", __FUNCTION__); - down(&(us->dev_semaphore)); + mutex_lock(&(us->dev_mutex)); result = usb_stor_port_reset(us); - up(&(us->dev_semaphore)); + mutex_unlock(&us->dev_mutex); return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index dbcf23980ff..dd108634348 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include @@ -188,7 +189,7 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) struct us_data *us = usb_get_intfdata(iface); /* Wait until no command is running */ - down(&us->dev_semaphore); + mutex_lock(&us->dev_mutex); US_DEBUGP("%s\n", __FUNCTION__); if (us->suspend_resume_hook) @@ -198,7 +199,7 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) /* When runtime PM is working, we'll set a flag to indicate * whether we should autoresume when a SCSI request arrives. */ - up(&us->dev_semaphore); + mutex_unlock(&us->dev_mutex); return 0; } @@ -206,14 +207,14 @@ static int storage_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - down(&us->dev_semaphore); + mutex_lock(&us->dev_mutex); US_DEBUGP("%s\n", __FUNCTION__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); iface->dev.power.power_state.event = PM_EVENT_ON; - up(&us->dev_semaphore); + mutex_unlock(&us->dev_mutex); return 0; } @@ -276,12 +277,12 @@ static int usb_stor_control_thread(void * __us) US_DEBUGP("*** thread awakened.\n"); /* lock the device pointers */ - down(&(us->dev_semaphore)); + mutex_lock(&(us->dev_mutex)); /* if the device has disconnected, we are free to exit */ if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) { US_DEBUGP("-- exiting\n"); - up(&(us->dev_semaphore)); + mutex_unlock(&us->dev_mutex); break; } @@ -370,7 +371,7 @@ SkipForAbort: scsi_unlock(host); /* unlock the device pointers */ - up(&(us->dev_semaphore)); + mutex_unlock(&us->dev_mutex); } /* for (;;) */ scsi_host_put(host); @@ -815,8 +816,8 @@ static void quiesce_and_remove_host(struct us_data *us) * The thread will exit when it sees the DISCONNECTING flag. */ /* Wait for the current command to finish, then remove the host */ - down(&us->dev_semaphore); - up(&us->dev_semaphore); + mutex_lock(&us->dev_mutex); + mutex_unlock(&us->dev_mutex); /* queuecommand won't accept any new commands and the control * thread won't execute a previously-queued command. If there @@ -870,9 +871,9 @@ retry: /* For bulk-only devices, determine the max LUN value */ if (us->protocol == US_PR_BULK && !(us->flags & US_FL_SINGLE_LUN)) { - down(&us->dev_semaphore); + mutex_lock(&us->dev_mutex); us->max_lun = usb_stor_Bulk_max_lun(us); - up(&us->dev_semaphore); + mutex_unlock(&us->dev_mutex); } scsi_scan_host(us_to_host(us)); printk(KERN_DEBUG "usb-storage: device scan complete\n"); @@ -912,7 +913,7 @@ static int storage_probe(struct usb_interface *intf, us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); - init_MUTEX(&(us->dev_semaphore)); + mutex_init(&(us->dev_mutex)); init_MUTEX_LOCKED(&(us->sema)); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 7259fd1f6b0..009fb0953a5 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -49,6 +49,7 @@ #include #include #include +#include #include struct us_data; @@ -103,9 +104,9 @@ typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ struct us_data { /* The device we're working with * It's important to note: - * (o) you must hold dev_semaphore to change pusb_dev + * (o) you must hold dev_mutex to change pusb_dev */ - struct semaphore dev_semaphore; /* protect pusb_dev */ + struct mutex dev_mutex; /* protect pusb_dev */ struct usb_device *pusb_dev; /* this usb_device */ struct usb_interface *pusb_intf; /* this interface */ struct us_unusual_dev *unusual_dev; /* device-filter entry */ -- cgit v1.2.3-70-g09d2