From cab00891c5489cb6d0cde0a55d39bd5f2871fa70 Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Tue, 3 Oct 2006 22:36:44 +0200 Subject: Still more typo fixes Signed-off-by: Adrian Bunk --- drivers/usb/atm/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 550ddfa71a4..b450cbaa3a0 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -64,7 +64,7 @@ config USB_XUSBATM Say Y here if you have a DSL USB modem not explicitly supported by another USB DSL drivers. In order to use your modem you will need to pass the vendor ID, product ID, and endpoint numbers for transmission - and reception as module parameters. You may need to initialize the + and reception as module parameters. You may need to initialize the modem using a user space utility (a firmware loader for example). To compile this driver as a module, choose M here: the diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 8e5dd6f29d0..bbbc82a8336 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -7,7 +7,7 @@ # # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). -# - Some systems have both kinds of of controller. +# - Some systems have both kinds of controllers. # # With help from a special transceiver and a "Mini-AB" jack, systems with # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). -- cgit v1.2.3-70-g09d2