From 88564dda0ec6fe10c5503d53c2205616ff1eaab2 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 25 Mar 2013 20:27:19 +0000 Subject: MIPS: remove obsolete Kconfig macros The support for PB1100, PB1500, and PB1550 got merged into the code for DB1000 and DB1550 code in v3.7. When that was done the three related Kconfig symbols were dropped. But not all related Kconfig macros were removed. Do so now. Note that the PB1100 code in the Au1100 LCD driver is removed entirely and not converted to use its current Kconfig macro. That is done because the macros it uses (PB1100_G_CONTROL, PB1100_G_CONTROL_BL, and PB1100_G_CONTROL_VDD) are never defined. Actually only one of these was ever defined (PB1100_G_CONTROL) but that define was removed in v2.6.34. So, as far as I can tell, this code could have never compiled. Signed-off-by: Paul Bolle Patchwork: http://patchwork.linux-mips.org/patch/5040/ Acked-by: John Crispin --- drivers/video/au1100fb.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) (limited to 'drivers/video/au1100fb.c') diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index ddabaa867b0..700cac067b4 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -111,30 +111,16 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi) switch (blank_mode) { case VESA_NO_BLANKING: - /* Turn on panel */ - fbdev->regs->lcd_control |= LCD_CONTROL_GO; -#ifdef CONFIG_MIPS_PB1100 - if (fbdev->panel_idx == 1) { - au_writew(au_readw(PB1100_G_CONTROL) - | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), - PB1100_G_CONTROL); - } -#endif + /* Turn on panel */ + fbdev->regs->lcd_control |= LCD_CONTROL_GO; au_sync(); break; case VESA_VSYNC_SUSPEND: case VESA_HSYNC_SUSPEND: case VESA_POWERDOWN: - /* Turn off panel */ - fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; -#ifdef CONFIG_MIPS_PB1100 - if (fbdev->panel_idx == 1) { - au_writew(au_readw(PB1100_G_CONTROL) - & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD), - PB1100_G_CONTROL); - } -#endif + /* Turn off panel */ + fbdev->regs->lcd_control &= ~LCD_CONTROL_GO; au_sync(); break; default: -- cgit v1.2.3-70-g09d2