From 93a22f8b95756c53e80308820892119c910d2739 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Oct 2008 22:03:15 -0700 Subject: omap drivers: switch to standard GPIO calls This updates most of the OMAP drivers which are in mainline to switch to using the cross-platform GPIO calls instead of the older OMAP-specific ones. This is all fairly brainless/obvious stuff. Probably the most interesting bit is to observe that the omap-keypad code seems to now have a portable core that could work with non-OMAP matrix keypads. (That would improve with hardware IRQ debouncing enabled, of course...) Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Cc: Dmitry Torokhov Cc: Antonino Daplas Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/omap/lcd_osk.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/video/omap/lcd_osk.c') diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index a4a725f427a..379c96d36da 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -29,6 +29,7 @@ static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { + /* gpio2 was allocated in board init */ return 0; } @@ -47,11 +48,8 @@ static int osk_panel_enable(struct lcd_panel *panel) /* Set PWL level */ omap_writeb(0xFF, OMAP_PWL_ENABLE); - /* configure GPIO2 as output */ - omap_set_gpio_direction(2, 0); - - /* set GPIO2 high */ - omap_set_gpio_dataout(2, 1); + /* set GPIO2 high (lcd power enabled) */ + gpio_set_value(2, 1); return 0; } @@ -65,7 +63,7 @@ static void osk_panel_disable(struct lcd_panel *panel) omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); /* set GPIO2 low */ - omap_set_gpio_dataout(2, 0); + gpio_set_value(2, 0); } static unsigned long osk_panel_get_caps(struct lcd_panel *panel) -- cgit v1.2.3-70-g09d2