From 3db716bca710b5f0f1749c058532728d21b85bfc Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Mon, 17 Sep 2012 11:49:35 +0300 Subject: OMAPDSS: sharp-ls panel: remove platform_enable/disable callbacks The sharp-ls panel driver now manages the gpios required to configure the panel. This was previously done in omap_dss_device's platform_enable/disable callbacks defined in board files using this panel. All the board files using this panel now pass the gpio information as platform data via the panel_sharp_ls037v7dw01_data struct, which is needed by the panel driver to configure the gpios connected to the panel. Hence, the platform_enable/disable ops can be safely removed now. Signed-off-by: Archit Taneja --- drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'drivers/video/omap2') diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c index e6d9c9bf41f..74cb0eb4531 100644 --- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c @@ -125,12 +125,6 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev) /* wait couple of vsyncs until enabling the LCD */ msleep(50); - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - if (gpio_is_valid(pd->resb_gpio)) gpio_set_value_cansleep(pd->resb_gpio, 1); @@ -138,8 +132,6 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev) gpio_set_value_cansleep(pd->ini_gpio, 1); return 0; -err1: - omapdss_dpi_display_disable(dssdev); err0: return r; } @@ -157,9 +149,6 @@ static void sharp_ls_power_off(struct omap_dss_device *dssdev) if (gpio_is_valid(pd->resb_gpio)) gpio_set_value_cansleep(pd->resb_gpio, 0); - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - /* wait at least 5 vsyncs after disabling the LCD */ msleep(100); -- cgit v1.2.3-70-g09d2