From a47161a55e40203e5dae6d04df3b159551377365 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Sun, 20 Nov 2011 19:15:39 +0100 Subject: OMAPDSS: add FocalTech ETM070003DH6 display support Add data for the FocalTech ETM070003DH6 display to the generic_dpi_panel display driver. Signed-off-by: Ilya Yanok Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays/panel-generic-dpi.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c index 519c47d2057..593f8312022 100644 --- a/drivers/video/omap2/displays/panel-generic-dpi.c +++ b/drivers/video/omap2/displays/panel-generic-dpi.c @@ -297,6 +297,26 @@ static struct panel_config generic_dpi_panels[] = { .name = "apollon", }, + /* FocalTech ETM070003DH6 */ + { + { + .x_res = 800, + .y_res = 480, + + .pixel_clock = 28000, + + .hsw = 48, + .hfp = 40, + .hbp = 40, + + .vsw = 3, + .vfp = 13, + .vbp = 29, + }, + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | + OMAP_DSS_LCD_IHS, + .name = "focaltech_etm070003dh6", + }, }; struct panel_drv_data { -- cgit v1.2.3-70-g09d2 From a702c85906390282e2aabb6cb30e448e23ee1599 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 12 Oct 2011 10:10:21 +0300 Subject: OMAPDSS: DSI: flush posted write when entering ULPS Flush posted write between writing the ULPS enable bits and waiting for the interrupt. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 5abf8e7e745..1331f92f11c 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3561,6 +3561,9 @@ static int dsi_enter_ulps(struct platform_device *dsidev) REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (1 << 0) | (1 << 1) | (1 << 2), 7, 5); + /* flush posted write and wait for SCP interface to finish the write */ + dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG2); + if (wait_for_completion_timeout(&completion, msecs_to_jiffies(1000)) == 0) { DSSERR("ULPS enable timeout\n"); @@ -3575,6 +3578,9 @@ static int dsi_enter_ulps(struct platform_device *dsidev) REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (0 << 0) | (0 << 1) | (0 << 2), 7, 5); + /* flush posted write and wait for SCP interface to finish the write */ + dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG2); + dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ULPS); dsi_if_enable(dsidev, false); -- cgit v1.2.3-70-g09d2 From 968f8e97a3291a3c7c9a2dee1a85a092de638f65 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 12 Oct 2011 10:13:14 +0300 Subject: OMAPDSS: DSI: flush posted write in send_bta Flush posted write after setting the bit to send the BTA to ensure the BTA is sent right away, as the code in dsi_vc_send_bta_sync() waits for an interrupt caused indirectly by sending the BTA. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 1331f92f11c..4b1c0744375 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2913,6 +2913,9 @@ static int dsi_vc_send_bta(struct platform_device *dsidev, int channel) REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ + /* flush posted write */ + dsi_read_reg(dsidev, DSI_VC_CTRL(channel)); + return 0; } -- cgit v1.2.3-70-g09d2 From b6a44e7748527d01b0c2f9a67686babaf0a5e53b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 12 Oct 2011 10:17:02 +0300 Subject: OMAPDSS: DISPC: Flush posted writes when enabling outputs Flush posted write in _enable_lcd_out() and _enable_digit_out(). This ensures the the lcd/digit bit is written before the code starts waiting for interrupts about enabling/disabling the output. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 5c81533eaca..5bbd838a657 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1916,10 +1916,14 @@ static void dispc_disable_isr(void *data, u32 mask) static void _enable_lcd_out(enum omap_channel channel, bool enable) { - if (channel == OMAP_DSS_CHANNEL_LCD2) + if (channel == OMAP_DSS_CHANNEL_LCD2) { REG_FLD_MOD(DISPC_CONTROL2, enable ? 1 : 0, 0, 0); - else + /* flush posted write */ + dispc_read_reg(DISPC_CONTROL2); + } else { REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); + dispc_read_reg(DISPC_CONTROL); + } } static void dispc_mgr_enable_lcd_out(enum omap_channel channel, bool enable) @@ -1967,6 +1971,8 @@ static void dispc_mgr_enable_lcd_out(enum omap_channel channel, bool enable) static void _enable_digit_out(bool enable) { REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); + /* flush posted write */ + dispc_read_reg(DISPC_CONTROL); } static void dispc_mgr_enable_digit_out(bool enable) -- cgit v1.2.3-70-g09d2 From d982085050e67da24a57ec04eb3701eb4805118a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Wed, 12 Oct 2011 15:05:59 +0300 Subject: OMAPDSS: DSI: count with number of lanes DSI driver currently counts used lanes and number of supported lanes by using the number of data lanes (i.e. excluding clock lane). This patch changes this to use the number of all lanes so that the following lane config patches are cleaner. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 49 +++++++++++++++++++------------------------ 1 file changed, 22 insertions(+), 27 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 4b1c0744375..6a110b2bca4 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -327,7 +327,7 @@ struct dsi_data { unsigned long fint_min, fint_max; unsigned long lpdiv_max; - int num_data_lanes; + unsigned num_lanes_supported; unsigned scp_clk_refcount; }; @@ -2029,19 +2029,8 @@ static int dsi_cio_power(struct platform_device *dsidev, return 0; } -/* Number of data lanes present on DSI interface */ -static inline int dsi_get_num_data_lanes(struct platform_device *dsidev) -{ - /* DSI on OMAP3 doesn't have register DSI_GNQ, set number - * of data lanes as 2 by default */ - if (dss_has_feature(FEAT_DSI_GNQ)) - return REG_GET(dsidev, DSI_GNQ, 11, 9); /* NB_DATA_LANES */ - else - return 2; -} - -/* Number of data lanes used by the dss device */ -static inline int dsi_get_num_data_lanes_dssdev(struct omap_dss_device *dssdev) +/* Number of lanes used by the dss device */ +static inline int dsi_get_num_lanes_used(struct omap_dss_device *dssdev) { int num_data_lanes = 0; @@ -2054,7 +2043,7 @@ static inline int dsi_get_num_data_lanes_dssdev(struct omap_dss_device *dssdev) if (dssdev->phy.dsi.data4_lane != 0) num_data_lanes++; - return num_data_lanes; + return num_data_lanes + 1; } static unsigned dsi_get_line_buf_size(struct platform_device *dsidev) @@ -2092,7 +2081,7 @@ static void dsi_set_lane_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); u32 r; - int num_data_lanes_dssdev = dsi_get_num_data_lanes_dssdev(dssdev); + int num_lanes_used = dsi_get_num_lanes_used(dssdev); int clk_lane = dssdev->phy.dsi.clk_lane; int data1_lane = dssdev->phy.dsi.data1_lane; @@ -2108,14 +2097,14 @@ static void dsi_set_lane_config(struct omap_dss_device *dssdev) r = FLD_MOD(r, data1_pol, 7, 7); r = FLD_MOD(r, data2_lane, 10, 8); r = FLD_MOD(r, data2_pol, 11, 11); - if (num_data_lanes_dssdev > 2) { + if (num_lanes_used > 3) { int data3_lane = dssdev->phy.dsi.data3_lane; int data3_pol = dssdev->phy.dsi.data3_pol; r = FLD_MOD(r, data3_lane, 14, 12); r = FLD_MOD(r, data3_pol, 15, 15); } - if (num_data_lanes_dssdev > 3) { + if (num_lanes_used > 4) { int data4_lane = dssdev->phy.dsi.data4_lane; int data4_pol = dssdev->phy.dsi.data4_pol; @@ -2247,7 +2236,7 @@ static void dsi_cio_enable_lane_override(struct omap_dss_device *dssdev, int data4_pol = dssdev->phy.dsi.data4_pol; u32 l = 0; - u8 lptxscp_start = dsi->num_data_lanes == 2 ? 22 : 26; + u8 lptxscp_start = dsi->num_lanes_supported == 3 ? 22 : 26; if (lanes & DSI_CLK_P) l |= 1 << ((clk_lane - 1) * 2 + (clk_pol ? 0 : 1)); @@ -2385,7 +2374,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); int r; - int num_data_lanes_dssdev = dsi_get_num_data_lanes_dssdev(dssdev); + int num_lanes_used = dsi_get_num_lanes_used(dssdev); u32 l; DSSDBGF(); @@ -2430,10 +2419,10 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) * manually. */ - if (num_data_lanes_dssdev > 2) + if (num_lanes_used > 3) lane_mask |= DSI_DATA3_P; - if (num_data_lanes_dssdev > 3) + if (num_lanes_used > 4) lane_mask |= DSI_DATA4_P; dsi_cio_enable_lane_override(dssdev, lane_mask); @@ -3852,7 +3841,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev) unsigned ddr_clk_pre, ddr_clk_post; unsigned enter_hs_mode_lat, exit_hs_mode_lat; unsigned ths_eot; - int ndl = dsi_get_num_data_lanes_dssdev(dssdev); + int ndl = dsi_get_num_lanes_used(dssdev) - 1; u32 r; r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0); @@ -4552,9 +4541,9 @@ int dsi_init_display(struct omap_dss_device *dssdev) dsi->vdds_dsi_reg = vdds_dsi; } - if (dsi_get_num_data_lanes_dssdev(dssdev) > dsi->num_data_lanes) { - DSSERR("DSI%d can't support more than %d data lanes\n", - dsi_module + 1, dsi->num_data_lanes); + if (dsi_get_num_lanes_used(dssdev) > dsi->num_lanes_supported) { + DSSERR("DSI%d can't support more than %d lanes\n", + dsi_module + 1, dsi->num_lanes_supported); return -EINVAL; } @@ -4780,7 +4769,13 @@ static int omap_dsihw_probe(struct platform_device *dsidev) dev_dbg(&dsidev->dev, "OMAP DSI rev %d.%d\n", FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); - dsi->num_data_lanes = dsi_get_num_data_lanes(dsidev); + /* DSI on OMAP3 doesn't have register DSI_GNQ, set number + * of data to 3 by default */ + if (dss_has_feature(FEAT_DSI_GNQ)) + /* NB_DATA_LANES */ + dsi->num_lanes_supported = 1 + REG_GET(dsidev, DSI_GNQ, 11, 9); + else + dsi->num_lanes_supported = 3; dsi_runtime_put(dsidev); -- cgit v1.2.3-70-g09d2 From 739a7f46cbf6dc3d4f899e4b566196d99403457a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 11:22:06 +0300 Subject: OMAPDSS: DSI: Parse lane config Parse the lane configuration from the device data into internal lane config format. This will be used in the following patches to clean up the lane handling. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 83 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 6a110b2bca4..aea110c9d63 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -203,6 +203,21 @@ struct dsi_reg { u16 idx; }; typedef void (*omap_dsi_isr_t) (void *arg, u32 mask); #define DSI_MAX_NR_ISRS 2 +#define DSI_MAX_NR_LANES 5 + +enum dsi_lane_function { + DSI_LANE_UNUSED = 0, + DSI_LANE_CLK, + DSI_LANE_DATA1, + DSI_LANE_DATA2, + DSI_LANE_DATA3, + DSI_LANE_DATA4, +}; + +struct dsi_lane_config { + enum dsi_lane_function function; + u8 polarity; +}; struct dsi_isr_data { omap_dsi_isr_t isr; @@ -329,6 +344,9 @@ struct dsi_data { unsigned num_lanes_supported; + struct dsi_lane_config lanes[DSI_MAX_NR_LANES]; + unsigned num_lanes_used; + unsigned scp_clk_refcount; }; @@ -2077,6 +2095,65 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev) } } +static int dsi_parse_lane_config(struct omap_dss_device *dssdev) +{ + struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + u8 lanes[DSI_MAX_NR_LANES]; + u8 polarities[DSI_MAX_NR_LANES]; + int num_lanes, i; + + static const enum dsi_lane_function functions[] = { + DSI_LANE_CLK, + DSI_LANE_DATA1, + DSI_LANE_DATA2, + DSI_LANE_DATA3, + DSI_LANE_DATA4, + }; + + lanes[0] = dssdev->phy.dsi.clk_lane; + lanes[1] = dssdev->phy.dsi.data1_lane; + lanes[2] = dssdev->phy.dsi.data2_lane; + lanes[3] = dssdev->phy.dsi.data3_lane; + lanes[4] = dssdev->phy.dsi.data4_lane; + polarities[0] = dssdev->phy.dsi.clk_pol; + polarities[1] = dssdev->phy.dsi.data1_pol; + polarities[2] = dssdev->phy.dsi.data2_pol; + polarities[3] = dssdev->phy.dsi.data3_pol; + polarities[4] = dssdev->phy.dsi.data4_pol; + + num_lanes = 0; + + for (i = 0; i < dsi->num_lanes_supported; ++i) + dsi->lanes[i].function = DSI_LANE_UNUSED; + + for (i = 0; i < dsi->num_lanes_supported; ++i) { + int num; + + if (lanes[i] == DSI_LANE_UNUSED) + break; + + num = lanes[i] - 1; + + if (num >= dsi->num_lanes_supported) + return -EINVAL; + + if (dsi->lanes[num].function != DSI_LANE_UNUSED) + return -EINVAL; + + dsi->lanes[num].function = functions[i]; + dsi->lanes[num].polarity = polarities[i]; + num_lanes++; + } + + if (num_lanes < 2 || num_lanes > dsi->num_lanes_supported) + return -EINVAL; + + dsi->num_lanes_used = num_lanes; + + return 0; +} + static void dsi_set_lane_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); @@ -4328,6 +4405,12 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev) int dsi_module = dsi_get_dsidev_id(dsidev); int r; + r = dsi_parse_lane_config(dssdev); + if (r) { + DSSERR("illegal lane config"); + goto err0; + } + r = dsi_pll_init(dsidev, true, true); if (r) goto err0; -- cgit v1.2.3-70-g09d2 From 48368395f670ac8cc60288674de940a38693412e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 11:22:39 +0300 Subject: OMAPDSS: DSI: Use new lane config in dsi_set_lane_config Use the new lane config in dsi_set_lane_config(). Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 84 +++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 44 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index aea110c9d63..ba8d6b328a3 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2154,59 +2154,53 @@ static int dsi_parse_lane_config(struct omap_dss_device *dssdev) return 0; } -static void dsi_set_lane_config(struct omap_dss_device *dssdev) +static int dsi_set_lane_config(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + static const u8 offsets[] = { 0, 4, 8, 12, 16 }; + static const enum dsi_lane_function functions[] = { + DSI_LANE_CLK, + DSI_LANE_DATA1, + DSI_LANE_DATA2, + DSI_LANE_DATA3, + DSI_LANE_DATA4, + }; u32 r; - int num_lanes_used = dsi_get_num_lanes_used(dssdev); - - int clk_lane = dssdev->phy.dsi.clk_lane; - int data1_lane = dssdev->phy.dsi.data1_lane; - int data2_lane = dssdev->phy.dsi.data2_lane; - int clk_pol = dssdev->phy.dsi.clk_pol; - int data1_pol = dssdev->phy.dsi.data1_pol; - int data2_pol = dssdev->phy.dsi.data2_pol; + int i; r = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1); - r = FLD_MOD(r, clk_lane, 2, 0); - r = FLD_MOD(r, clk_pol, 3, 3); - r = FLD_MOD(r, data1_lane, 6, 4); - r = FLD_MOD(r, data1_pol, 7, 7); - r = FLD_MOD(r, data2_lane, 10, 8); - r = FLD_MOD(r, data2_pol, 11, 11); - if (num_lanes_used > 3) { - int data3_lane = dssdev->phy.dsi.data3_lane; - int data3_pol = dssdev->phy.dsi.data3_pol; - - r = FLD_MOD(r, data3_lane, 14, 12); - r = FLD_MOD(r, data3_pol, 15, 15); + + for (i = 0; i < dsi->num_lanes_used; ++i) { + unsigned offset = offsets[i]; + unsigned polarity, lane_number; + unsigned t; + + for (t = 0; t < dsi->num_lanes_supported; ++t) + if (dsi->lanes[t].function == functions[i]) + break; + + if (t == dsi->num_lanes_supported) + return -EINVAL; + + lane_number = t; + polarity = dsi->lanes[t].polarity; + + r = FLD_MOD(r, lane_number + 1, offset + 2, offset); + r = FLD_MOD(r, polarity, offset + 3, offset + 3); } - if (num_lanes_used > 4) { - int data4_lane = dssdev->phy.dsi.data4_lane; - int data4_pol = dssdev->phy.dsi.data4_pol; - r = FLD_MOD(r, data4_lane, 18, 16); - r = FLD_MOD(r, data4_pol, 19, 19); + /* clear the unused lanes */ + for (; i < dsi->num_lanes_supported; ++i) { + unsigned offset = offsets[i]; + + r = FLD_MOD(r, 0, offset + 2, offset); + r = FLD_MOD(r, 0, offset + 3, offset + 3); } - dsi_write_reg(dsidev, DSI_COMPLEXIO_CFG1, r); - /* The configuration of the DSI complex I/O (number of data lanes, - position, differential order) should not be changed while - DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for - the hardware to take into account a new configuration of the complex - I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to - follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, - then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set - DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the - DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the - DSI complex I/O configuration is unknown. */ + dsi_write_reg(dsidev, DSI_COMPLEXIO_CFG1, r); - /* - REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0); - REG_FLD_MOD(dsidev, DSI_CTRL, 0, 0, 0); - REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 20, 20); - REG_FLD_MOD(dsidev, DSI_CTRL, 1, 0, 0); - */ + return 0; } static inline unsigned ns2ddr(struct platform_device *dsidev, unsigned ns) @@ -2473,7 +2467,9 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) goto err_scp_clk_dom; } - dsi_set_lane_config(dssdev); + r = dsi_set_lane_config(dssdev); + if (r) + goto err_scp_clk_dom; /* set TX STOP MODE timer to maximum for this operation */ l = dsi_read_reg(dsidev, DSI_TIMING1); -- cgit v1.2.3-70-g09d2 From 85f17e8e2c8d5f9266ca28f05cbc57598eddb05a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 15:12:23 +0300 Subject: OMAPDSS: DSI: use lane config in dsi_get_lane_mask Use the new lane config in dsi_get_lane_mask(). Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index ba8d6b328a3..1a209a23f51 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2422,22 +2422,20 @@ static int dsi_cio_wait_tx_clk_esc_reset(struct omap_dss_device *dssdev) return 0; } +/* return bitmask of enabled lanes, lane0 being the lsb */ static unsigned dsi_get_lane_mask(struct omap_dss_device *dssdev) { - unsigned lanes = 0; + struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + unsigned mask = 0; + int i; - if (dssdev->phy.dsi.clk_lane != 0) - lanes |= 1 << (dssdev->phy.dsi.clk_lane - 1); - if (dssdev->phy.dsi.data1_lane != 0) - lanes |= 1 << (dssdev->phy.dsi.data1_lane - 1); - if (dssdev->phy.dsi.data2_lane != 0) - lanes |= 1 << (dssdev->phy.dsi.data2_lane - 1); - if (dssdev->phy.dsi.data3_lane != 0) - lanes |= 1 << (dssdev->phy.dsi.data3_lane - 1); - if (dssdev->phy.dsi.data4_lane != 0) - lanes |= 1 << (dssdev->phy.dsi.data4_lane - 1); + for (i = 0; i < dsi->num_lanes_supported; ++i) { + if (dsi->lanes[i].function != DSI_LANE_UNUSED) + mask |= 1 << i; + } - return lanes; + return mask; } static int dsi_cio_init(struct omap_dss_device *dssdev) -- cgit v1.2.3-70-g09d2 From 8dc0766fcf3b84ec83aa601acabf21f2c98ca253 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 15:26:50 +0300 Subject: OMAPDSS: DSI: use lane config in dsi_cio_wait_tx_clk_esc_reset Use the new lane config in dsi_cio_wait_tx_clk_esc_reset(). This also extends the function to support 5 lanes on OMAP4, instead of 3 lanes. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 47 +++++++++++++++++-------------------------- 1 file changed, 18 insertions(+), 29 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 1a209a23f51..52cf97f5217 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2365,51 +2365,40 @@ static void dsi_cio_disable_lane_override(struct platform_device *dsidev) static int dsi_cio_wait_tx_clk_esc_reset(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); - int t; - int bits[3]; - bool in_use[3]; - - if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) { - bits[0] = 28; - bits[1] = 27; - bits[2] = 26; - } else { - bits[0] = 24; - bits[1] = 25; - bits[2] = 26; - } - - in_use[0] = false; - in_use[1] = false; - in_use[2] = false; + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); + int t, i; + bool in_use[DSI_MAX_NR_LANES]; + static const u8 offsets_old[] = { 28, 27, 26 }; + static const u8 offsets_new[] = { 24, 25, 26, 27, 28 }; + const u8 *offsets; + + if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) + offsets = offsets_old; + else + offsets = offsets_new; - if (dssdev->phy.dsi.clk_lane != 0) - in_use[dssdev->phy.dsi.clk_lane - 1] = true; - if (dssdev->phy.dsi.data1_lane != 0) - in_use[dssdev->phy.dsi.data1_lane - 1] = true; - if (dssdev->phy.dsi.data2_lane != 0) - in_use[dssdev->phy.dsi.data2_lane - 1] = true; + for (i = 0; i < dsi->num_lanes_supported; ++i) + in_use[i] = dsi->lanes[i].function != DSI_LANE_UNUSED; t = 100000; while (true) { u32 l; - int i; int ok; l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5); ok = 0; - for (i = 0; i < 3; ++i) { - if (!in_use[i] || (l & (1 << bits[i]))) + for (i = 0; i < dsi->num_lanes_supported; ++i) { + if (!in_use[i] || (l & (1 << offsets[i]))) ok++; } - if (ok == 3) + if (ok == dsi->num_lanes_supported) break; if (--t == 0) { - for (i = 0; i < 3; ++i) { - if (!in_use[i] || (l & (1 << bits[i]))) + for (i = 0; i < dsi->num_lanes_supported; ++i) { + if (!in_use[i] || (l & (1 << offsets[i]))) continue; DSSERR("CIO TXCLKESC%d domain not coming " \ -- cgit v1.2.3-70-g09d2 From 9b4362f2b5ad6d0cf6b5754000b8db80d0592e89 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 16:06:43 +0300 Subject: OMAPDSS: DSI: use lane config in dsi_cio_enable_lane_override Use the new lane config in dsi_cio_enable_lane_override(). The function parameters are also slightly changed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 85 ++++++++++++++----------------------------- 1 file changed, 27 insertions(+), 58 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 52cf97f5217..dee95253e01 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -238,19 +238,6 @@ enum dsi_vc_source { DSI_VC_SOURCE_VP, }; -enum dsi_lane { - DSI_CLK_P = 1 << 0, - DSI_CLK_N = 1 << 1, - DSI_DATA1_P = 1 << 2, - DSI_DATA1_N = 1 << 3, - DSI_DATA2_P = 1 << 4, - DSI_DATA2_N = 1 << 5, - DSI_DATA3_P = 1 << 6, - DSI_DATA3_N = 1 << 7, - DSI_DATA4_P = 1 << 8, - DSI_DATA4_N = 1 << 9, -}; - struct dsi_update_region { u16 x, y, w, h; struct omap_dss_device *device; @@ -2290,49 +2277,28 @@ static void dsi_cio_timings(struct platform_device *dsidev) dsi_write_reg(dsidev, DSI_DSIPHY_CFG2, r); } +/* lane masks have lane 0 at lsb. mask_p for positive lines, n for negative */ static void dsi_cio_enable_lane_override(struct omap_dss_device *dssdev, - enum dsi_lane lanes) + unsigned mask_p, unsigned mask_n) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); - int clk_lane = dssdev->phy.dsi.clk_lane; - int data1_lane = dssdev->phy.dsi.data1_lane; - int data2_lane = dssdev->phy.dsi.data2_lane; - int data3_lane = dssdev->phy.dsi.data3_lane; - int data4_lane = dssdev->phy.dsi.data4_lane; - int clk_pol = dssdev->phy.dsi.clk_pol; - int data1_pol = dssdev->phy.dsi.data1_pol; - int data2_pol = dssdev->phy.dsi.data2_pol; - int data3_pol = dssdev->phy.dsi.data3_pol; - int data4_pol = dssdev->phy.dsi.data4_pol; - - u32 l = 0; + int i; + u32 l; u8 lptxscp_start = dsi->num_lanes_supported == 3 ? 22 : 26; - if (lanes & DSI_CLK_P) - l |= 1 << ((clk_lane - 1) * 2 + (clk_pol ? 0 : 1)); - if (lanes & DSI_CLK_N) - l |= 1 << ((clk_lane - 1) * 2 + (clk_pol ? 1 : 0)); - - if (lanes & DSI_DATA1_P) - l |= 1 << ((data1_lane - 1) * 2 + (data1_pol ? 0 : 1)); - if (lanes & DSI_DATA1_N) - l |= 1 << ((data1_lane - 1) * 2 + (data1_pol ? 1 : 0)); - - if (lanes & DSI_DATA2_P) - l |= 1 << ((data2_lane - 1) * 2 + (data2_pol ? 0 : 1)); - if (lanes & DSI_DATA2_N) - l |= 1 << ((data2_lane - 1) * 2 + (data2_pol ? 1 : 0)); - - if (lanes & DSI_DATA3_P) - l |= 1 << ((data3_lane - 1) * 2 + (data3_pol ? 0 : 1)); - if (lanes & DSI_DATA3_N) - l |= 1 << ((data3_lane - 1) * 2 + (data3_pol ? 1 : 0)); - - if (lanes & DSI_DATA4_P) - l |= 1 << ((data4_lane - 1) * 2 + (data4_pol ? 0 : 1)); - if (lanes & DSI_DATA4_N) - l |= 1 << ((data4_lane - 1) * 2 + (data4_pol ? 1 : 0)); + l = 0; + + for (i = 0; i < dsi->num_lanes_supported; ++i) { + unsigned p = dsi->lanes[i].polarity; + + if (mask_p & (1 << i)) + l |= 1 << (i * 2 + (p ? 0 : 1)); + + if (mask_n & (1 << i)) + l |= 1 << (i * 2 + (p ? 1 : 0)); + } + /* * Bits in REGLPTXSCPDAT4TO0DXDY: * 17: DY0 18: DX0 @@ -2432,7 +2398,6 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); int r; - int num_lanes_used = dsi_get_num_lanes_used(dssdev); u32 l; DSSDBGF(); @@ -2467,7 +2432,8 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) dsi_write_reg(dsidev, DSI_TIMING1, l); if (dsi->ulps_enabled) { - u32 lane_mask = DSI_CLK_P | DSI_DATA1_P | DSI_DATA2_P; + unsigned mask_p; + int i; DSSDBG("manual ulps exit\n"); @@ -2476,16 +2442,19 @@ static int dsi_cio_init(struct omap_dss_device *dssdev) * ULPS exit sequence, as after reset the DSS HW thinks * that we are not in ULPS mode, and refuses to send the * sequence. So we need to send the ULPS exit sequence - * manually. + * manually by setting positive lines high and negative lines + * low for 1ms. */ - if (num_lanes_used > 3) - lane_mask |= DSI_DATA3_P; + mask_p = 0; - if (num_lanes_used > 4) - lane_mask |= DSI_DATA4_P; + for (i = 0; i < dsi->num_lanes_supported; ++i) { + if (dsi->lanes[i].function == DSI_LANE_UNUSED) + continue; + mask_p |= 1 << i; + } - dsi_cio_enable_lane_override(dssdev, lane_mask); + dsi_cio_enable_lane_override(dssdev, mask_p, 0); } r = dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ON); -- cgit v1.2.3-70-g09d2 From db18644f90e664bf30f58cf9b8bc879598bff62f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 16:12:29 +0300 Subject: OMAPDSS: DSI: remove dsi_get_num_lanes_used There's no longer need for the dsi_get_num_lanes_used function, so it can be removed. The lane check in dsi_init_display() can be removed as the validity of the config will be verified when parsing it. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 27 ++------------------------- 1 file changed, 2 insertions(+), 25 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index dee95253e01..2b375c6027b 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -2034,23 +2034,6 @@ static int dsi_cio_power(struct platform_device *dsidev, return 0; } -/* Number of lanes used by the dss device */ -static inline int dsi_get_num_lanes_used(struct omap_dss_device *dssdev) -{ - int num_data_lanes = 0; - - if (dssdev->phy.dsi.data1_lane != 0) - num_data_lanes++; - if (dssdev->phy.dsi.data2_lane != 0) - num_data_lanes++; - if (dssdev->phy.dsi.data3_lane != 0) - num_data_lanes++; - if (dssdev->phy.dsi.data4_lane != 0) - num_data_lanes++; - - return num_data_lanes + 1; -} - static unsigned dsi_get_line_buf_size(struct platform_device *dsidev) { int val; @@ -3863,6 +3846,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev) static void dsi_proto_timings(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; unsigned tclk_pre, tclk_post; unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; @@ -3870,7 +3854,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev) unsigned ddr_clk_pre, ddr_clk_post; unsigned enter_hs_mode_lat, exit_hs_mode_lat; unsigned ths_eot; - int ndl = dsi_get_num_lanes_used(dssdev) - 1; + int ndl = dsi->num_lanes_used - 1; u32 r; r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG0); @@ -4554,7 +4538,6 @@ int dsi_init_display(struct omap_dss_device *dssdev) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); - int dsi_module = dsi_get_dsidev_id(dsidev); DSSDBG("DSI init\n"); @@ -4576,12 +4559,6 @@ int dsi_init_display(struct omap_dss_device *dssdev) dsi->vdds_dsi_reg = vdds_dsi; } - if (dsi_get_num_lanes_used(dssdev) > dsi->num_lanes_supported) { - DSSERR("DSI%d can't support more than %d lanes\n", - dsi_module + 1, dsi->num_lanes_supported); - return -EINVAL; - } - return 0; } -- cgit v1.2.3-70-g09d2 From 522a0c2fe58fb6eb145cce07a303857b08322a2b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 16:18:52 +0300 Subject: OMAPDSS: DSI: fix lane handling when entering ULPS The current code always enters ULPS for 3 lanes. This is not right, as there could be only 2 lanes used, and on OMAP4 we have 5 lanes. Fix the code to put all used lanes into ULPS. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 2b375c6027b..22055db1dab 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3517,7 +3517,8 @@ static int dsi_enter_ulps(struct platform_device *dsidev) { struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); DECLARE_COMPLETION_ONSTACK(completion); - int r; + int r, i; + unsigned mask; DSSDBGF(); @@ -3560,10 +3561,16 @@ static int dsi_enter_ulps(struct platform_device *dsidev) if (r) return r; + mask = 0; + + for (i = 0; i < dsi->num_lanes_supported; ++i) { + if (dsi->lanes[i].function == DSI_LANE_UNUSED) + continue; + mask |= 1 << i; + } /* Assert TxRequestEsc for data lanes and TxUlpsClk for clk lane */ /* LANEx_ULPS_SIG2 */ - REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (1 << 0) | (1 << 1) | (1 << 2), - 7, 5); + REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, mask, 9, 5); /* flush posted write and wait for SCP interface to finish the write */ dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG2); @@ -3579,8 +3586,7 @@ static int dsi_enter_ulps(struct platform_device *dsidev) DSI_CIO_IRQ_ULPSACTIVENOT_ALL0); /* Reset LANEx_ULPS_SIG2 */ - REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (0 << 0) | (0 << 1) | (0 << 2), - 7, 5); + REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, 0, 9, 5); /* flush posted write and wait for SCP interface to finish the write */ dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG2); -- cgit v1.2.3-70-g09d2 From 3b98409eb7508ce534243312c3a9ac8543c06808 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 19:06:49 +0300 Subject: OMAPDSS: DSI: improve wait_for_bit_change We sometimes get timeout when disabling the DSI interface with video mode. It looks like the disable will stall until the current frame has been finished, and this can take multiple milliseconds. wait_for_bit_change() currently uses a busyloop to wait for a bit to change. This is used in multiple places. The problem is, we don't have clear understanding how long particular operations can take, so the function needs to support longer waits. Improve wait_for_bit_change() to first busy loop for 100 times to see if the bit changes almost right away. If the bit hasn't changed, move to a loop with a sleep of 1ms, and poll for 500ms. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 22055db1dab..a01a0119cc7 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -418,14 +418,29 @@ static void dsi_completion_handler(void *data, u32 mask) static inline int wait_for_bit_change(struct platform_device *dsidev, const struct dsi_reg idx, int bitnum, int value) { - int t = 100000; + unsigned long timeout; + ktime_t wait; + int t; + + /* first busyloop to see if the bit changes right away */ + t = 100; + while (t-- > 0) { + if (REG_GET(dsidev, idx, bitnum, bitnum) == value) + return value; + } + + /* then loop for 500ms, sleeping for 1ms in between */ + timeout = jiffies + msecs_to_jiffies(500); + while (time_before(jiffies, timeout)) { + if (REG_GET(dsidev, idx, bitnum, bitnum) == value) + return value; - while (REG_GET(dsidev, idx, bitnum, bitnum) != value) { - if (--t == 0) - return !value; + wait = ns_to_ktime(1000 * 1000); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_hrtimeout(&wait, HRTIMER_MODE_REL); } - return value; + return !value; } u8 dsi_get_pixel_size(enum omap_dss_dsi_pixel_format fmt) -- cgit v1.2.3-70-g09d2 From 6cc78aa9843155c89faa93231332a8b3817020df Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 13 Oct 2011 19:22:43 +0300 Subject: OMAPDSS: DSI: disable DDR_CLK_ALWAYS_ON when entering ULPS ULPS cannot be entered if the DDR clk is enabled. Thus disable the DDR clk before entering ULPS. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index a01a0119cc7..9bcb5c2511d 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3544,9 +3544,11 @@ static int dsi_enter_ulps(struct platform_device *dsidev) if (dsi->ulps_enabled) return 0; + /* DDR_CLK_ALWAYS_ON */ if (REG_GET(dsidev, DSI_CLK_CTRL, 13, 13)) { - DSSERR("DDR_CLK_ALWAYS_ON enabled when entering ULPS\n"); - return -EIO; + dsi_if_enable(dsidev, 0); + REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 0, 13, 13); + dsi_if_enable(dsidev, 1); } dsi_sync_vc(dsidev, 0); -- cgit v1.2.3-70-g09d2 From 8754595796a45e88411b68005bc98310c8c6ae76 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 15 Nov 2011 10:56:11 +0200 Subject: OMAPDSS: DISPC: add missing prototype dispc_mgr_is_enabled() was missing a prototype in dss.h Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dss.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 6308fc59fc9..3310f10dc16 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -414,6 +414,7 @@ void dispc_mgr_set_cpr_coef(enum omap_channel channel, struct omap_dss_cpr_coefs *coefs); bool dispc_mgr_go_busy(enum omap_channel channel); void dispc_mgr_go(enum omap_channel channel); +bool dispc_mgr_is_enabled(enum omap_channel channel); void dispc_mgr_enable(enum omap_channel channel, bool enable); bool dispc_mgr_is_channel_enabled(enum omap_channel channel); void dispc_mgr_set_io_pad_mode(enum dss_io_pad_mode mode); -- cgit v1.2.3-70-g09d2 From 714ad3ac505bba711f961bb8013644c9d8fb486a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 27 Oct 2011 13:11:31 +0300 Subject: OMAPDSS: Remove old fifomerge hacks Once in a time omapdss had basic support for fifomerge. Fifomerge was removed as the implementation didn't work properly, and a proper implementation is a complex problem. However, some unused fifo-merge related code was left behind. This patch removes those. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/manager.c | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 6e63845cc7d..1be5f47a211 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -1313,8 +1313,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) struct manager_cache_data *mc; int i; struct omap_overlay *ovl; - int num_planes_enabled = 0; - bool use_fifomerge; unsigned long flags; int r; @@ -1347,11 +1345,8 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) continue; } - if (!ovl->info_dirty) { - if (oc->enabled) - ++num_planes_enabled; + if (!ovl->info_dirty) continue; - } dssdev = ovl->manager->device; @@ -1375,8 +1370,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) oc->channel = ovl->manager->id; oc->enabled = true; - - ++num_planes_enabled; } /* Configure managers */ @@ -1406,21 +1399,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; } - /* XXX TODO: Try to get fifomerge working. The problem is that it - * affects both managers, not individually but at the same time. This - * means the change has to be well synchronized. I guess the proper way - * is to have a two step process for fifo merge: - * fifomerge enable: - * 1. disable other planes, leaving one plane enabled - * 2. wait until the planes are disabled on HW - * 3. config merged fifo thresholds, enable fifomerge - * fifomerge disable: - * 1. config unmerged fifo thresholds, disable fifomerge - * 2. wait until fifo changes are in HW - * 3. enable planes - */ - use_fifomerge = false; - /* Configure overlay fifos */ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { struct omap_dss_device *dssdev; @@ -1436,8 +1414,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) dssdev = ovl->manager->device; size = dispc_ovl_get_fifo_size(ovl->id); - if (use_fifomerge) - size *= 3; burst_size = dispc_ovl_get_burst_size(ovl->id); -- cgit v1.2.3-70-g09d2 From b952b553d23912b0b4a496b3e695db5e60c7a99a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 31 Oct 2011 13:47:30 +0200 Subject: OMAPDSS: remove L4_EXAMPLE code Some old example code has been left lying around. Remove the example code. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dss.h | 3 --- drivers/video/omap2/dss/overlay.c | 36 ------------------------------------ 2 files changed, 39 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 3310f10dc16..7d2b6dd18e1 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -192,9 +192,6 @@ void dss_init_overlays(struct platform_device *pdev); void dss_uninit_overlays(struct platform_device *pdev); int dss_check_overlay(struct omap_overlay *ovl, struct omap_dss_device *dssdev); void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr); -#ifdef L4_EXAMPLE -void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr); -#endif void dss_recheck_connections(struct omap_dss_device *dssdev, bool force); /* DSS */ diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c index ab8e40e4875..d15b826bf37 100644 --- a/drivers/video/omap2/dss/overlay.c +++ b/drivers/video/omap2/dss/overlay.c @@ -641,15 +641,6 @@ void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr) mgr->overlays = dispc_overlays; } -#ifdef L4_EXAMPLE -static struct omap_overlay *l4_overlays[1]; -void dss_overlay_setup_l4_manager(struct omap_overlay_manager *mgr) -{ - mgr->num_overlays = 1; - mgr->overlays = l4_overlays; -} -#endif - void dss_init_overlays(struct platform_device *pdev) { int i, r; @@ -716,33 +707,6 @@ void dss_init_overlays(struct platform_device *pdev) dispc_overlays[i] = ovl; } - -#ifdef L4_EXAMPLE - { - struct omap_overlay *ovl; - ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); - - BUG_ON(ovl == NULL); - - ovl->name = "l4"; - ovl->supported_modes = OMAP_DSS_COLOR_RGB24U; - - ovl->set_manager = &omap_dss_set_manager; - ovl->unset_manager = &omap_dss_unset_manager; - ovl->set_overlay_info = &dss_ovl_set_overlay_info; - ovl->get_overlay_info = &dss_ovl_get_overlay_info; - - omap_dss_add_overlay(ovl); - - r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, - &pdev->dev.kobj, "overlayl4"); - - if (r) - DSSERR("failed to create sysfs file\n"); - - l4_overlays[0] = ovl; - } -#endif } /* connect overlays to the new device, if not already connected. if force -- cgit v1.2.3-70-g09d2 From f427984e896fde6ae03056cf1f8ac5d4a99275d4 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 28 Oct 2011 15:26:26 +0300 Subject: OMAPDSS: DISPC: make dispc_ovl_set_channel_out() public Make dispc_ovl_set_channel_out() public so that later patches can handle changing overlay's manager. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 3 +-- drivers/video/omap2/dss/dss.h | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 5bbd838a657..5130f88516a 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -875,8 +875,7 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane, REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), m, 4, 1); } -static void dispc_ovl_set_channel_out(enum omap_plane plane, - enum omap_channel channel) +void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel) { int shift; u32 val; diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 7d2b6dd18e1..f899f0f6573 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -402,6 +402,8 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, bool ilace, enum omap_channel channel, bool replication, u32 fifo_low, u32 fifo_high); int dispc_ovl_enable(enum omap_plane plane, bool enable); +void dispc_ovl_set_channel_out(enum omap_plane plane, + enum omap_channel channel); void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable); -- cgit v1.2.3-70-g09d2 From 6f04e1bfc36c5865dc5679f85e25b6613be86298 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 31 Oct 2011 08:58:52 +0200 Subject: OMAPDSS: DISPC: make dispc_ovl_set_fifo_threshold() public Make dispc_ovl_set_fifo_threshold() public so that later patches can handle overlay fifo configuration. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 3 +-- drivers/video/omap2/dss/dss.h | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 5130f88516a..82497317a4b 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1056,8 +1056,7 @@ u32 dispc_ovl_get_fifo_size(enum omap_plane plane) return dispc.fifo_size[plane]; } -static void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, - u32 high) +void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high) { u8 hi_start, hi_end, lo_start, lo_end; u32 unit; diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index f899f0f6573..313a7cafdc9 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -396,6 +396,7 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, struct dispc_clock_info *cinfo); +void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high); u32 dispc_ovl_get_fifo_size(enum omap_plane plane); u32 dispc_ovl_get_burst_size(enum omap_plane plane); int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, -- cgit v1.2.3-70-g09d2 From 8760db5406fb7b92f900d6c98eea198695476467 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 16:17:37 +0200 Subject: OMAPDSS: remove partial update from the overlay manager Partial update for manual update displays has never worked quite well: * The HW has limitations on the update area, and the x and width need to be even. * Showing a part of a scaled overlay causes artifacts. * Makes the management of dispc very complex Considering the above points and the fact that partial update is not used anywhere, this and the following patches remove the partial update support. This will greatly simplify the following re-write of the apply mechanism to get proper locking and additional features like fifo-merge. This patch removes the partial update from the manager.c. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 2 - drivers/video/omap2/dss/dss.h | 3 - drivers/video/omap2/dss/manager.c | 333 +------------------------------------- drivers/video/omap2/dss/rfbi.c | 1 - 4 files changed, 6 insertions(+), 333 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 9bcb5c2511d..773a496a2d3 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -4206,8 +4206,6 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev, dsi_perf_mark_setup(dsidev); - dss_setup_partial_planes(dssdev, x, y, w, h, - enlarge_update_area); dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h); return 0; diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 313a7cafdc9..7f6a612bb5b 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -182,9 +182,6 @@ void default_get_overlay_fifo_thresholds(enum omap_plane plane, int dss_init_overlay_managers(struct platform_device *pdev); void dss_uninit_overlay_managers(struct platform_device *pdev); int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); -void dss_setup_partial_planes(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h, - bool enlarge_update_area); void dss_start_update(struct omap_dss_device *dssdev); /* overlay */ diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 1be5f47a211..c616f850eaf 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -530,13 +530,6 @@ struct manager_cache_data { bool manual_update; bool do_manual_update; - - /* manual update region */ - u16 x, y, w, h; - - /* enlarge the update area if the update area contains scaled - * overlays */ - bool enlarge_update_area; }; static struct { @@ -762,65 +755,11 @@ static int overlay_enabled(struct omap_overlay *ovl) return ovl->info.enabled && ovl->manager && ovl->manager->device; } -/* Is rect1 a subset of rect2? */ -static bool rectangle_subset(int x1, int y1, int w1, int h1, - int x2, int y2, int w2, int h2) -{ - if (x1 < x2 || y1 < y2) - return false; - - if (x1 + w1 > x2 + w2) - return false; - - if (y1 + h1 > y2 + h2) - return false; - - return true; -} - -/* Do rect1 and rect2 overlap? */ -static bool rectangle_intersects(int x1, int y1, int w1, int h1, - int x2, int y2, int w2, int h2) -{ - if (x1 >= x2 + w2) - return false; - - if (x2 >= x1 + w1) - return false; - - if (y1 >= y2 + h2) - return false; - - if (y2 >= y1 + h1) - return false; - - return true; -} - -static bool dispc_is_overlay_scaled(struct overlay_cache_data *oc) -{ - struct omap_overlay_info *oi = &oc->info; - - if (oi->out_width != 0 && oi->width != oi->out_width) - return true; - - if (oi->out_height != 0 && oi->height != oi->out_height) - return true; - - return false; -} - static int configure_overlay(enum omap_plane plane) { struct overlay_cache_data *c; - struct manager_cache_data *mc; - struct omap_overlay_info *oi, new_oi; - struct omap_overlay_manager_info *mi; - u16 outw, outh; - u16 x, y, w, h; - u32 paddr; + struct omap_overlay_info *oi; int r; - u16 orig_w, orig_h, orig_outw, orig_outh; DSSDBGF("%d", plane); @@ -832,120 +771,7 @@ static int configure_overlay(enum omap_plane plane) return 0; } - mc = &dss_cache.manager_cache[c->channel]; - mi = &mc->info; - - x = oi->pos_x; - y = oi->pos_y; - w = oi->width; - h = oi->height; - outw = oi->out_width == 0 ? oi->width : oi->out_width; - outh = oi->out_height == 0 ? oi->height : oi->out_height; - paddr = oi->paddr; - - orig_w = w; - orig_h = h; - orig_outw = outw; - orig_outh = outh; - - if (mc->manual_update && mc->do_manual_update) { - unsigned bpp; - unsigned scale_x_m = w, scale_x_d = outw; - unsigned scale_y_m = h, scale_y_d = outh; - - /* If the overlay is outside the update region, disable it */ - if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h, - x, y, outw, outh)) { - dispc_ovl_enable(plane, 0); - return 0; - } - - switch (oi->color_mode) { - case OMAP_DSS_COLOR_NV12: - bpp = 8; - break; - case OMAP_DSS_COLOR_RGB16: - case OMAP_DSS_COLOR_ARGB16: - case OMAP_DSS_COLOR_YUV2: - case OMAP_DSS_COLOR_UYVY: - case OMAP_DSS_COLOR_RGBA16: - case OMAP_DSS_COLOR_RGBX16: - case OMAP_DSS_COLOR_ARGB16_1555: - case OMAP_DSS_COLOR_XRGB16_1555: - bpp = 16; - break; - - case OMAP_DSS_COLOR_RGB24P: - bpp = 24; - break; - - case OMAP_DSS_COLOR_RGB24U: - case OMAP_DSS_COLOR_ARGB32: - case OMAP_DSS_COLOR_RGBA32: - case OMAP_DSS_COLOR_RGBX32: - bpp = 32; - break; - - default: - BUG(); - } - - if (mc->x > oi->pos_x) { - x = 0; - outw -= (mc->x - oi->pos_x); - paddr += (mc->x - oi->pos_x) * - scale_x_m / scale_x_d * bpp / 8; - } else { - x = oi->pos_x - mc->x; - } - - if (mc->y > oi->pos_y) { - y = 0; - outh -= (mc->y - oi->pos_y); - paddr += (mc->y - oi->pos_y) * - scale_y_m / scale_y_d * - oi->screen_width * bpp / 8; - } else { - y = oi->pos_y - mc->y; - } - - if (mc->w < (x + outw)) - outw -= (x + outw) - (mc->w); - - if (mc->h < (y + outh)) - outh -= (y + outh) - (mc->h); - - w = w * outw / orig_outw; - h = h * outh / orig_outh; - - /* YUV mode overlay's input width has to be even and the - * algorithm above may adjust the width to be odd. - * - * Here we adjust the width if needed, preferring to increase - * the width if the original width was bigger. - */ - if ((w & 1) && - (oi->color_mode == OMAP_DSS_COLOR_YUV2 || - oi->color_mode == OMAP_DSS_COLOR_UYVY)) { - if (orig_w > w) - w += 1; - else - w -= 1; - } - } - - new_oi = *oi; - - /* update new_oi members which could have been possibly updated */ - new_oi.pos_x = x; - new_oi.pos_y = y; - new_oi.width = w; - new_oi.height = h; - new_oi.out_width = outw; - new_oi.out_height = outh; - new_oi.paddr = paddr; - - r = dispc_ovl_setup(plane, &new_oi, c->ilace, c->channel, + r = dispc_ovl_setup(plane, oi, c->ilace, c->channel, c->replication, c->fifo_low, c->fifo_high); if (r) { /* this shouldn't happen */ @@ -1070,170 +896,23 @@ static int configure_dispc(void) return r; } -/* Make the coordinates even. There are some strange problems with OMAP and - * partial DSI update when the update widths are odd. */ -static void make_even(u16 *x, u16 *w) -{ - u16 x1, x2; - - x1 = *x; - x2 = *x + *w; - - x1 &= ~1; - x2 = ALIGN(x2, 2); - - *x = x1; - *w = x2 - x1; -} - -/* Configure dispc for partial update. Return possibly modified update - * area */ -void dss_setup_partial_planes(struct omap_dss_device *dssdev, - u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area) +void dss_start_update(struct omap_dss_device *dssdev) { - struct overlay_cache_data *oc; struct manager_cache_data *mc; - struct omap_overlay_info *oi; + struct overlay_cache_data *oc; const int num_ovls = dss_feat_get_num_ovls(); + const int num_mgrs = dss_feat_get_num_mgrs(); struct omap_overlay_manager *mgr; int i; - u16 x, y, w, h; - unsigned long flags; - bool area_changed; - - x = *xi; - y = *yi; - w = *wi; - h = *hi; - - DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", - *xi, *yi, *wi, *hi); mgr = dssdev->manager; - if (!mgr) { - DSSDBG("no manager\n"); - return; - } - - make_even(&x, &w); - - spin_lock_irqsave(&dss_cache.lock, flags); - - /* - * Execute the outer loop until the inner loop has completed - * once without increasing the update area. This will ensure that - * all scaled overlays end up completely within the update area. - */ - do { - area_changed = false; - - /* We need to show the whole overlay if it is scaled. So look - * for those, and make the update area larger if found. - * Also mark the overlay cache dirty */ - for (i = 0; i < num_ovls; ++i) { - unsigned x1, y1, x2, y2; - unsigned outw, outh; - - oc = &dss_cache.overlay_cache[i]; - oi = &oc->info; - - if (oc->channel != mgr->id) - continue; - - oc->dirty = true; - - if (!enlarge_update_area) - continue; - - if (!oc->enabled) - continue; - - if (!dispc_is_overlay_scaled(oc)) - continue; - - outw = oi->out_width == 0 ? - oi->width : oi->out_width; - outh = oi->out_height == 0 ? - oi->height : oi->out_height; - - /* is the overlay outside the update region? */ - if (!rectangle_intersects(x, y, w, h, - oi->pos_x, oi->pos_y, - outw, outh)) - continue; - - /* if the overlay totally inside the update region? */ - if (rectangle_subset(oi->pos_x, oi->pos_y, outw, outh, - x, y, w, h)) - continue; - - if (x > oi->pos_x) - x1 = oi->pos_x; - else - x1 = x; - - if (y > oi->pos_y) - y1 = oi->pos_y; - else - y1 = y; - - if ((x + w) < (oi->pos_x + outw)) - x2 = oi->pos_x + outw; - else - x2 = x + w; - - if ((y + h) < (oi->pos_y + outh)) - y2 = oi->pos_y + outh; - else - y2 = y + h; - - x = x1; - y = y1; - w = x2 - x1; - h = y2 - y1; - - make_even(&x, &w); - - DSSDBG("changing upd area due to ovl(%d) " - "scaling %d,%d %dx%d\n", - i, x, y, w, h); - - area_changed = true; - } - } while (area_changed); - mc = &dss_cache.manager_cache[mgr->id]; - mc->do_manual_update = true; - mc->enlarge_update_area = enlarge_update_area; - mc->x = x; - mc->y = y; - mc->w = w; - mc->h = h; + mc->do_manual_update = true; configure_dispc(); - mc->do_manual_update = false; - spin_unlock_irqrestore(&dss_cache.lock, flags); - - *xi = x; - *yi = y; - *wi = w; - *hi = h; -} - -void dss_start_update(struct omap_dss_device *dssdev) -{ - struct manager_cache_data *mc; - struct overlay_cache_data *oc; - const int num_ovls = dss_feat_get_num_ovls(); - const int num_mgrs = dss_feat_get_num_mgrs(); - struct omap_overlay_manager *mgr; - int i; - - mgr = dssdev->manager; - for (i = 0; i < num_ovls; ++i) { oc = &dss_cache.overlay_cache[i]; if (oc->channel != mgr->id) diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 1130c608a56..814bb9500dc 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -784,7 +784,6 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev, if (*w == 0 || *h == 0) return -EINVAL; - dss_setup_partial_planes(dssdev, x, y, w, h, true); dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h); return 0; -- cgit v1.2.3-70-g09d2 From 5476e74a03f4be972708162050c8ac7fe150449f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 16:34:20 +0200 Subject: OMAPDSS: remove partial update from DSI Partial update for manual update displays has never worked quite well: * The HW has limitations on the update area, and the x and width need to be even. * Showing a part of a scaled overlay causes artifacts. * Makes the management of dispc very complex Considering the above points and the fact that partial update is not used anywhere, this and the following patches remove the partial update support. This will greatly simplify the following re-write of the apply mechanism to get proper locking and additional features like fifo-merge. This patch removes the partial update from the dsi.c. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays/panel-taal.c | 16 ++----- drivers/video/omap2/dss/dsi.c | 79 ++++++++----------------------- include/video/omapdss.h | 7 +-- 3 files changed, 25 insertions(+), 77 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 80c3f6ab1a9..0aa6c5d5a69 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -1394,12 +1394,8 @@ static irqreturn_t taal_te_isr(int irq, void *data) if (old) { cancel_delayed_work(&td->te_timeout_work); - r = omap_dsi_update(dssdev, td->channel, - td->update_region.x, - td->update_region.y, - td->update_region.w, - td->update_region.h, - taal_framedone_cb, dssdev); + r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb, + dssdev); if (r) goto err; } @@ -1444,10 +1440,6 @@ static int taal_update(struct omap_dss_device *dssdev, goto err; } - r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h, true); - if (r) - goto err; - r = taal_set_update_window(td, x, y, w, h); if (r) goto err; @@ -1462,8 +1454,8 @@ static int taal_update(struct omap_dss_device *dssdev, msecs_to_jiffies(250)); atomic_set(&td->do_update, 1); } else { - r = omap_dsi_update(dssdev, td->channel, x, y, w, h, - taal_framedone_cb, dssdev); + r = omap_dsi_update(dssdev, td->channel, taal_framedone_cb, + dssdev); if (r) goto err; } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 773a496a2d3..6fc82a4a14c 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -238,11 +238,6 @@ enum dsi_vc_source { DSI_VC_SOURCE_VP, }; -struct dsi_update_region { - u16 x, y, w, h; - struct omap_dss_device *device; -}; - struct dsi_irq_stats { unsigned long last_reset; unsigned irq_count; @@ -292,7 +287,9 @@ struct dsi_data { struct dsi_isr_tables isr_tables_copy; int update_channel; - struct dsi_update_region update_region; +#ifdef DEBUG + unsigned update_bytes; +#endif bool te_enabled; bool ulps_enabled; @@ -474,7 +471,6 @@ static void dsi_perf_mark_start(struct platform_device *dsidev) static void dsi_perf_show(struct platform_device *dsidev, const char *name) { struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); - struct omap_dss_device *dssdev = dsi->update_region.device; ktime_t t, setup_time, trans_time; u32 total_bytes; u32 setup_us, trans_us, total_us; @@ -496,9 +492,7 @@ static void dsi_perf_show(struct platform_device *dsidev, const char *name) total_us = setup_us + trans_us; - total_bytes = dsi->update_region.w * - dsi->update_region.h * - dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8; + total_bytes = dsi->update_bytes; printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " "%u bytes, %u kbytes/sec\n", @@ -4040,7 +4034,7 @@ void dsi_video_mode_disable(struct omap_dss_device *dssdev, int channel) EXPORT_SYMBOL(dsi_video_mode_disable); static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h) + u16 w, u16 h) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); @@ -4055,8 +4049,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, const unsigned channel = dsi->update_channel; const unsigned line_buf_size = dsi_get_line_buf_size(dsidev); - DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", - x, y, w, h); + DSSDBG("dsi_update_screen_dispc(%dx%d)\n", w, h); dsi_vc_config_source(dsidev, channel, DSI_VC_SOURCE_VP); @@ -4180,64 +4173,27 @@ static void dsi_framedone_irq_callback(void *data, u32 mask) #endif } -int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h, - bool enlarge_update_area) +int omap_dsi_update(struct omap_dss_device *dssdev, int channel, + void (*callback)(int, void *), void *data) { struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); + struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); u16 dw, dh; - dssdev->driver->get_resolution(dssdev, &dw, &dh); - - if (*x > dw || *y > dh) - return -EINVAL; - - if (*x + *w > dw) - return -EINVAL; - - if (*y + *h > dh) - return -EINVAL; - - if (*w == 1) - return -EINVAL; - - if (*w == 0 || *h == 0) - return -EINVAL; - dsi_perf_mark_setup(dsidev); - dispc_mgr_set_lcd_size(dssdev->manager->id, *w, *h); - - return 0; -} -EXPORT_SYMBOL(omap_dsi_prepare_update); - -int omap_dsi_update(struct omap_dss_device *dssdev, - int channel, - u16 x, u16 y, u16 w, u16 h, - void (*callback)(int, void *), void *data) -{ - struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev); - struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev); - dsi->update_channel = channel; - /* OMAP DSS cannot send updates of odd widths. - * omap_dsi_prepare_update() makes the widths even, but add a BUG_ON - * here to make sure we catch erroneous updates. Otherwise we'll only - * see rather obscure HW error happening, as DSS halts. */ - BUG_ON(x % 2 == 1); - dsi->framedone_callback = callback; dsi->framedone_data = data; - dsi->update_region.x = x; - dsi->update_region.y = y; - dsi->update_region.w = w; - dsi->update_region.h = h; - dsi->update_region.device = dssdev; + dssdev->driver->get_resolution(dssdev, &dw, &dh); - dsi_update_screen_dispc(dssdev, x, y, w, h); +#ifdef DEBUG + dsi->update_bytes = dw * dh * + dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8; +#endif + dsi_update_screen_dispc(dssdev, dw, dh); return 0; } @@ -4250,6 +4206,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev) int r; if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) { + u16 dw, dh; u32 irq; struct omap_video_timings timings = { .hsw = 1, @@ -4260,6 +4217,10 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev) .vbp = 0, }; + dssdev->driver->get_resolution(dssdev, &dw, &dh); + timings.x_res = dw; + timings.y_res = dh; + irq = dssdev->manager->id == OMAP_DSS_CHANNEL_LCD ? DISPC_IRQ_FRAMEDONE : DISPC_IRQ_FRAMEDONE2; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 378c7ed6760..60bf4260253 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -662,12 +662,7 @@ void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel, bool enable); int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); -int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h, - bool enlarge_update_area); -int omap_dsi_update(struct omap_dss_device *dssdev, - int channel, - u16 x, u16 y, u16 w, u16 h, +int omap_dsi_update(struct omap_dss_device *dssdev, int channel, void (*callback)(int, void *), void *data); int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel); int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id); -- cgit v1.2.3-70-g09d2 From 6331709bcafe578f63c837a8d726ce8ffdfe0895 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 16:45:07 +0200 Subject: OMAPDSS: remove partial update from panel-taal Partial update for manual update displays has never worked quite well: * The HW has limitations on the update area, and the x and width need to be even. * Showing a part of a scaled overlay causes artifacts. * Makes the management of dispc very complex Considering the above points and the fact that partial update is not used anywhere, this and the following patches remove the partial update support. This will greatly simplify the following re-write of the apply mechanism to get proper locking and additional features like fifo-merge. This patch removes the partial update from the panel-taal.c. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/displays/panel-taal.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c index 0aa6c5d5a69..dd64bd13f4f 100644 --- a/drivers/video/omap2/displays/panel-taal.c +++ b/drivers/video/omap2/displays/panel-taal.c @@ -198,12 +198,6 @@ struct taal_data { bool te_enabled; atomic_t do_update; - struct { - u16 x; - u16 y; - u16 w; - u16 h; - } update_region; int channel; struct delayed_work te_timeout_work; @@ -1440,16 +1434,14 @@ static int taal_update(struct omap_dss_device *dssdev, goto err; } - r = taal_set_update_window(td, x, y, w, h); + /* XXX no need to send this every frame, but dsi break if not done */ + r = taal_set_update_window(td, 0, 0, + td->panel_config->timings.x_res, + td->panel_config->timings.y_res); if (r) goto err; if (td->te_enabled && panel_data->use_ext_te) { - td->update_region.x = x; - td->update_region.y = y; - td->update_region.w = w; - td->update_region.h = h; - barrier(); schedule_delayed_work(&td->te_timeout_work, msecs_to_jiffies(250)); atomic_set(&td->do_update, 1); -- cgit v1.2.3-70-g09d2 From 1cb0017813e82c740ef7b60bdaa0aa74eaab6a76 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 18 Nov 2011 11:14:01 +0200 Subject: OMAPDSS: pass ovl manager to dss_start_update dss_start_update() takes currently the dss device as a parameter. Change the parameter to ovl manager, as that is what the dss_start_update() actually needs. Change the name of the function to dss_mgr_start_update() to reflect the change. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 2 +- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/dss/manager.c | 7 ++----- 3 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 6fc82a4a14c..101e3b8e178 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -4097,7 +4097,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, msecs_to_jiffies(250)); BUG_ON(r == 0); - dss_start_update(dssdev); + dss_mgr_start_update(dssdev->manager); if (dsi->te_enabled) { /* disable LP_RX_TO, so that we can receive TE. Time to wait diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 7f6a612bb5b..39d48371c0c 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -182,7 +182,7 @@ void default_get_overlay_fifo_thresholds(enum omap_plane plane, int dss_init_overlay_managers(struct platform_device *pdev); void dss_uninit_overlay_managers(struct platform_device *pdev); int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl); -void dss_start_update(struct omap_dss_device *dssdev); +void dss_mgr_start_update(struct omap_overlay_manager *mgr); /* overlay */ void dss_init_overlays(struct platform_device *pdev); diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index c616f850eaf..268704bc6c3 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -896,17 +896,14 @@ static int configure_dispc(void) return r; } -void dss_start_update(struct omap_dss_device *dssdev) +void dss_mgr_start_update(struct omap_overlay_manager *mgr) { struct manager_cache_data *mc; struct overlay_cache_data *oc; const int num_ovls = dss_feat_get_num_ovls(); const int num_mgrs = dss_feat_get_num_mgrs(); - struct omap_overlay_manager *mgr; int i; - mgr = dssdev->manager; - mc = &dss_cache.manager_cache[mgr->id]; mc->do_manual_update = true; @@ -929,7 +926,7 @@ void dss_start_update(struct omap_dss_device *dssdev) mc->shadow_dirty = false; } - dssdev->manager->enable(dssdev->manager); + mgr->enable(mgr); } static void dss_apply_irq_handler(void *data, u32 mask) -- cgit v1.2.3-70-g09d2 From cf0736681e569b0d3803d68d4f6d00f544f3426a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 16:08:27 +0200 Subject: OMAPDSS: DISPC: handle 0 out_width/out_height in ovl_setup() Overlay out_width/height are set to 0 when scaling is not used by the users of omapdss. Currently ovl_setup() expects the caller of ovl_setup() to convert those zero values to width or height. This patch makes ovl_setup() accept zero values for out_width/height, making calling ovl_setup() a bit simpler as the overlay_info can be just passed to this function without modifications. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 82497317a4b..f054972a5f5 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1781,6 +1781,7 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, s32 pix_inc; u16 frame_height = oi->height; unsigned int field_offset = 0; + u16 outw, outh; DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> " "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d " @@ -1792,25 +1793,28 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, if (oi->paddr == 0) return -EINVAL; - if (ilace && oi->height == oi->out_height) + outw = oi->out_width == 0 ? oi->width : oi->out_width; + outh = oi->out_height == 0 ? oi->height : oi->out_height; + + if (ilace && oi->height == outh) fieldmode = 1; if (ilace) { if (fieldmode) oi->height /= 2; oi->pos_y /= 2; - oi->out_height /= 2; + outh /= 2; DSSDBG("adjusting for ilace: height %d, pos_y %d, " "out_height %d\n", - oi->height, oi->pos_y, oi->out_height); + oi->height, oi->pos_y, outh); } if (!dss_feat_color_mode_supported(plane, oi->color_mode)) return -EINVAL; r = dispc_ovl_calc_scaling(plane, channel, oi->width, oi->height, - oi->out_width, oi->out_height, oi->color_mode, + outw, outh, oi->color_mode, &five_taps); if (r) return r; @@ -1828,10 +1832,10 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, * so the integer part must be added to the base address of the * bottom field. */ - if (!oi->height || oi->height == oi->out_height) + if (!oi->height || oi->height == outh) field_offset = 0; else - field_offset = oi->height / oi->out_height / 2; + field_offset = oi->height / outh / 2; } /* Fields are independent but interleaved in memory. */ @@ -1867,7 +1871,7 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, dispc_ovl_set_pix_inc(plane, pix_inc); DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, oi->width, - oi->height, oi->out_width, oi->out_height); + oi->height, outw, outh); dispc_ovl_set_pos(plane, oi->pos_x, oi->pos_y); @@ -1875,10 +1879,10 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) { dispc_ovl_set_scaling(plane, oi->width, oi->height, - oi->out_width, oi->out_height, + outw, outh, ilace, five_taps, fieldmode, oi->color_mode, oi->rotation); - dispc_ovl_set_vid_size(plane, oi->out_width, oi->out_height); + dispc_ovl_set_vid_size(plane, outw, outh); dispc_ovl_set_vid_color_conv(plane, cconv); } -- cgit v1.2.3-70-g09d2 From 3ba2a1c01546a4980e7b7742445560ae4afd1fc1 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 16:52:06 +0200 Subject: OMAPDSS: handle ilace/replication when configuring overlay Move the configuration of interlace and replication from omap_dss_mgr_apply() to configure_overlay(). This removes the need to store the values into the cache data. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/manager.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 268704bc6c3..d8d0d11d95d 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -510,8 +510,6 @@ struct overlay_cache_data { struct omap_overlay_info info; enum omap_channel channel; - bool replication; - bool ilace; u32 fifo_low; u32 fifo_high; @@ -757,8 +755,10 @@ static int overlay_enabled(struct omap_overlay *ovl) static int configure_overlay(enum omap_plane plane) { + struct omap_overlay *ovl; struct overlay_cache_data *c; struct omap_overlay_info *oi; + bool ilace, replication; int r; DSSDBGF("%d", plane); @@ -771,8 +771,14 @@ static int configure_overlay(enum omap_plane plane) return 0; } - r = dispc_ovl_setup(plane, oi, c->ilace, c->channel, - c->replication, c->fifo_low, c->fifo_high); + ovl = omap_dss_get_overlay(plane); + + replication = dss_use_replication(ovl->manager->device, oi->color_mode); + + ilace = ovl->manager->device->type == OMAP_DISPLAY_TYPE_VENC; + + r = dispc_ovl_setup(plane, oi, ilace, c->channel, + replication, c->fifo_low, c->fifo_high); if (r) { /* this shouldn't happen */ DSSERR("dispc_ovl_setup failed for ovl %d\n", plane); @@ -1038,11 +1044,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) oc->dirty = true; oc->info = ovl->info; - oc->replication = - dss_use_replication(dssdev, ovl->info.color_mode); - - oc->ilace = dssdev->type == OMAP_DISPLAY_TYPE_VENC; - oc->channel = ovl->manager->id; oc->enabled = true; -- cgit v1.2.3-70-g09d2 From f38545da53d98055d8b2f58fe156c86626f3427e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 17:00:07 +0200 Subject: OMAPDSS: separate FIFO threshold setup from ovl_setup Overlay FIFO thresholds are configured with ovl_setup, with all the other overlay attributes. This patch separates FIFO threshold setup so that we can later configure FIFO thresholds only when needed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 10 ++++------ drivers/video/omap2/dss/dss.h | 3 +-- drivers/video/omap2/dss/manager.c | 5 +++-- 3 files changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index f054972a5f5..094bb6e4179 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -1769,8 +1769,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane, } int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, - bool ilace, enum omap_channel channel, bool replication, - u32 fifo_low, u32 fifo_high) + bool ilace, enum omap_channel channel, bool replication) { struct omap_overlay *ovl = omap_dss_get_overlay(plane); bool five_taps = false; @@ -1784,11 +1783,11 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, u16 outw, outh; DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> " - "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d " - "fifo_low %d fifo high %d\n", plane, oi->paddr, oi->p_uv_addr, + "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d\n", + plane, oi->paddr, oi->p_uv_addr, oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height, oi->color_mode, oi->rotation, - oi->mirror, ilace, channel, replication, fifo_low, fifo_high); + oi->mirror, ilace, channel, replication); if (oi->paddr == 0) return -EINVAL; @@ -1896,7 +1895,6 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, dispc_ovl_set_channel_out(plane, channel); dispc_ovl_enable_replication(plane, replication); - dispc_ovl_set_fifo_threshold(plane, fifo_low, fifo_high); return 0; } diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 39d48371c0c..d56e916ca12 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -397,8 +397,7 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high); u32 dispc_ovl_get_fifo_size(enum omap_plane plane); u32 dispc_ovl_get_burst_size(enum omap_plane plane); int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, - bool ilace, enum omap_channel channel, bool replication, - u32 fifo_low, u32 fifo_high); + bool ilace, enum omap_channel channel, bool replication); int dispc_ovl_enable(enum omap_plane plane, bool enable); void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel); diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index d8d0d11d95d..31637ba58f5 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -777,8 +777,7 @@ static int configure_overlay(enum omap_plane plane) ilace = ovl->manager->device->type == OMAP_DISPLAY_TYPE_VENC; - r = dispc_ovl_setup(plane, oi, ilace, c->channel, - replication, c->fifo_low, c->fifo_high); + r = dispc_ovl_setup(plane, oi, ilace, c->channel, replication); if (r) { /* this shouldn't happen */ DSSERR("dispc_ovl_setup failed for ovl %d\n", plane); @@ -786,6 +785,8 @@ static int configure_overlay(enum omap_plane plane) return r; } + dispc_ovl_set_fifo_threshold(plane, c->fifo_low, c->fifo_high); + dispc_ovl_enable(plane, 1); return 0; -- cgit v1.2.3-70-g09d2 From 2cc5d1af5ad0a130fa5812f99bca18e0cdadbd36 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Nov 2011 17:03:44 +0200 Subject: OMAPDSS: separate overlay channel from ovl_setup Overlay channel is configured with ovl_setup, with all the other overlay attriutes. This patch separates overlay channel setup so that we can later configure the channel only when needed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 40 ++++++++++++++++++++++++++++++++++++--- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/dss/manager.c | 4 +++- 3 files changed, 41 insertions(+), 5 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 094bb6e4179..b66cf154f64 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -922,6 +922,39 @@ void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel) dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val); } +static enum omap_channel dispc_ovl_get_channel_out(enum omap_plane plane) +{ + int shift; + u32 val; + enum omap_channel channel; + + switch (plane) { + case OMAP_DSS_GFX: + shift = 8; + break; + case OMAP_DSS_VIDEO1: + case OMAP_DSS_VIDEO2: + case OMAP_DSS_VIDEO3: + shift = 16; + break; + default: + BUG(); + } + + val = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane)); + + if (dss_has_feature(FEAT_MGR_LCD2)) { + if (FLD_GET(val, 31, 30) == 0) + channel = FLD_GET(val, shift, shift); + else + channel = OMAP_DSS_CHANNEL_LCD2; + } else { + channel = FLD_GET(val, shift, shift); + } + + return channel; +} + static void dispc_ovl_set_burst_size(enum omap_plane plane, enum omap_burst_size burst_size) { @@ -1769,7 +1802,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane, } int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, - bool ilace, enum omap_channel channel, bool replication) + bool ilace, bool replication) { struct omap_overlay *ovl = omap_dss_get_overlay(plane); bool five_taps = false; @@ -1781,6 +1814,9 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, u16 frame_height = oi->height; unsigned int field_offset = 0; u16 outw, outh; + enum omap_channel channel; + + channel = dispc_ovl_get_channel_out(plane); DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> " "%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d\n", @@ -1892,8 +1928,6 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, dispc_ovl_set_pre_mult_alpha(plane, oi->pre_mult_alpha); dispc_ovl_setup_global_alpha(plane, oi->global_alpha); - dispc_ovl_set_channel_out(plane, channel); - dispc_ovl_enable_replication(plane, replication); return 0; diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index d56e916ca12..11c72d15ead 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -397,7 +397,7 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high); u32 dispc_ovl_get_fifo_size(enum omap_plane plane); u32 dispc_ovl_get_burst_size(enum omap_plane plane); int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi, - bool ilace, enum omap_channel channel, bool replication); + bool ilace, bool replication); int dispc_ovl_enable(enum omap_plane plane, bool enable); void dispc_ovl_set_channel_out(enum omap_plane plane, enum omap_channel channel); diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 31637ba58f5..ec98e177aec 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -777,7 +777,9 @@ static int configure_overlay(enum omap_plane plane) ilace = ovl->manager->device->type == OMAP_DISPLAY_TYPE_VENC; - r = dispc_ovl_setup(plane, oi, ilace, c->channel, replication); + dispc_ovl_set_channel_out(plane, c->channel); + + r = dispc_ovl_setup(plane, oi, ilace, replication); if (r) { /* this shouldn't happen */ DSSERR("dispc_ovl_setup failed for ovl %d\n", plane); -- cgit v1.2.3-70-g09d2 From c64dca40c5cf1cc61355411dcfb90949e57afdf0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 18:14:20 +0200 Subject: OMAPDSS: setup manager with dispc_mgr_setup() Change manager configuration to be similar to overlay configuration by creating dispc_mgr_setup() which takes omap_overlay_manager_info as parameter. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 26 ++++++++++++++++++++------ drivers/video/omap2/dss/dss.h | 11 ++--------- drivers/video/omap2/dss/manager.c | 9 +-------- 3 files changed, 23 insertions(+), 23 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index b66cf154f64..9c070a22867 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -996,7 +996,7 @@ void dispc_enable_gamma_table(bool enable) REG_FLD_MOD(DISPC_CONFIG, enable, 9, 9); } -void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable) +static void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable) { u16 reg; @@ -1010,7 +1010,7 @@ void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable) REG_FLD_MOD(reg, enable, 15, 15); } -void dispc_mgr_set_cpr_coef(enum omap_channel channel, +static void dispc_mgr_set_cpr_coef(enum omap_channel channel, struct omap_dss_cpr_coefs *coefs) { u32 coef_r, coef_g, coef_b; @@ -2164,7 +2164,7 @@ void dispc_set_loadmode(enum omap_dss_load_mode mode) } -void dispc_mgr_set_default_color(enum omap_channel channel, u32 color) +static void dispc_mgr_set_default_color(enum omap_channel channel, u32 color) { dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color); } @@ -2182,7 +2182,7 @@ u32 dispc_mgr_get_default_color(enum omap_channel channel) return l; } -void dispc_mgr_set_trans_key(enum omap_channel ch, +static void dispc_mgr_set_trans_key(enum omap_channel ch, enum omap_dss_trans_key_type type, u32 trans_key) { @@ -2215,7 +2215,7 @@ void dispc_mgr_get_trans_key(enum omap_channel ch, *trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch)); } -void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable) +static void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable) { if (ch == OMAP_DSS_CHANNEL_LCD) REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); @@ -2225,7 +2225,8 @@ void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable) REG_FLD_MOD(DISPC_CONFIG2, enable, 10, 10); } -void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, bool enable) +static void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, + bool enable) { if (!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER)) return; @@ -2269,6 +2270,19 @@ bool dispc_mgr_trans_key_enabled(enum omap_channel ch) return enabled; } +void dispc_mgr_setup(enum omap_channel channel, + struct omap_overlay_manager_info *info) +{ + dispc_mgr_set_default_color(channel, info->default_color); + dispc_mgr_set_trans_key(channel, info->trans_key_type, info->trans_key); + dispc_mgr_enable_trans_key(channel, info->trans_enabled); + dispc_mgr_enable_alpha_fixed_zorder(channel, + info->partial_alpha_enabled); + if (dss_has_feature(FEAT_CPR)) { + dispc_mgr_enable_cpr(channel, info->cpr_enable); + dispc_mgr_set_cpr_coef(channel, &info->cpr_coefs); + } +} void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines) { diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index 11c72d15ead..a8022578c60 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -405,9 +405,6 @@ void dispc_ovl_set_channel_out(enum omap_plane plane, void dispc_mgr_enable_fifohandcheck(enum omap_channel channel, bool enable); void dispc_mgr_set_lcd_size(enum omap_channel channel, u16 width, u16 height); -void dispc_mgr_enable_cpr(enum omap_channel channel, bool enable); -void dispc_mgr_set_cpr_coef(enum omap_channel channel, - struct omap_dss_cpr_coefs *coefs); bool dispc_mgr_go_busy(enum omap_channel channel); void dispc_mgr_go(enum omap_channel channel); bool dispc_mgr_is_enabled(enum omap_channel channel); @@ -418,16 +415,10 @@ void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable); void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines); void dispc_mgr_set_lcd_display_type(enum omap_channel channel, enum omap_lcd_display_type type); -void dispc_mgr_set_default_color(enum omap_channel channel, u32 color); u32 dispc_mgr_get_default_color(enum omap_channel channel); -void dispc_mgr_set_trans_key(enum omap_channel ch, - enum omap_dss_trans_key_type type, - u32 trans_key); void dispc_mgr_get_trans_key(enum omap_channel ch, enum omap_dss_trans_key_type *type, u32 *trans_key); -void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable); -void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, bool enable); bool dispc_mgr_trans_key_enabled(enum omap_channel ch); bool dispc_mgr_alpha_fixed_zorder_enabled(enum omap_channel ch); void dispc_mgr_set_lcd_timings(enum omap_channel channel, @@ -440,6 +431,8 @@ int dispc_mgr_set_clock_div(enum omap_channel channel, struct dispc_clock_info *cinfo); int dispc_mgr_get_clock_div(enum omap_channel channel, struct dispc_clock_info *cinfo); +void dispc_mgr_setup(enum omap_channel channel, + struct omap_overlay_manager_info *info); /* VENC */ #ifdef CONFIG_OMAP2_DSS_VENC diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index ec98e177aec..3421955c63b 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -803,14 +803,7 @@ static void configure_manager(enum omap_channel channel) /* picking info from the cache */ mi = &dss_cache.manager_cache[channel].info; - dispc_mgr_set_default_color(channel, mi->default_color); - dispc_mgr_set_trans_key(channel, mi->trans_key_type, mi->trans_key); - dispc_mgr_enable_trans_key(channel, mi->trans_enabled); - dispc_mgr_enable_alpha_fixed_zorder(channel, mi->partial_alpha_enabled); - if (dss_has_feature(FEAT_CPR)) { - dispc_mgr_enable_cpr(channel, mi->cpr_enable); - dispc_mgr_set_cpr_coef(channel, &mi->cpr_coefs); - } + dispc_mgr_setup(channel, mi); } /* configure_dispc() tries to write values from cache to shadow registers. -- cgit v1.2.3-70-g09d2 From c3f96fee1eb8d541b4b5bb841f57bd453c70f12d Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 18:14:11 +0200 Subject: OMAPDSS: DISPC: remove unused functions Remove unused functions: dispc_mgr_get_default_color dispc_mgr_get_trans_key dispc_mgr_trans_key_enabled dispc_mgr_alpha_fixed_zorder_enabled Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dispc.c | 65 ----------------------------------------- drivers/video/omap2/dss/dss.h | 6 ---- 2 files changed, 71 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 9c070a22867..1264c2d1512 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -2169,19 +2169,6 @@ static void dispc_mgr_set_default_color(enum omap_channel channel, u32 color) dispc_write_reg(DISPC_DEFAULT_COLOR(channel), color); } -u32 dispc_mgr_get_default_color(enum omap_channel channel) -{ - u32 l; - - BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && - channel != OMAP_DSS_CHANNEL_LCD && - channel != OMAP_DSS_CHANNEL_LCD2); - - l = dispc_read_reg(DISPC_DEFAULT_COLOR(channel)); - - return l; -} - static void dispc_mgr_set_trans_key(enum omap_channel ch, enum omap_dss_trans_key_type type, u32 trans_key) @@ -2196,25 +2183,6 @@ static void dispc_mgr_set_trans_key(enum omap_channel ch, dispc_write_reg(DISPC_TRANS_COLOR(ch), trans_key); } -void dispc_mgr_get_trans_key(enum omap_channel ch, - enum omap_dss_trans_key_type *type, - u32 *trans_key) -{ - if (type) { - if (ch == OMAP_DSS_CHANNEL_LCD) - *type = REG_GET(DISPC_CONFIG, 11, 11); - else if (ch == OMAP_DSS_CHANNEL_DIGIT) - *type = REG_GET(DISPC_CONFIG, 13, 13); - else if (ch == OMAP_DSS_CHANNEL_LCD2) - *type = REG_GET(DISPC_CONFIG2, 11, 11); - else - BUG(); - } - - if (trans_key) - *trans_key = dispc_read_reg(DISPC_TRANS_COLOR(ch)); -} - static void dispc_mgr_enable_trans_key(enum omap_channel ch, bool enable) { if (ch == OMAP_DSS_CHANNEL_LCD) @@ -2237,39 +2205,6 @@ static void dispc_mgr_enable_alpha_fixed_zorder(enum omap_channel ch, REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); } -bool dispc_mgr_alpha_fixed_zorder_enabled(enum omap_channel ch) -{ - bool enabled; - - if (!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER)) - return false; - - if (ch == OMAP_DSS_CHANNEL_LCD) - enabled = REG_GET(DISPC_CONFIG, 18, 18); - else if (ch == OMAP_DSS_CHANNEL_DIGIT) - enabled = REG_GET(DISPC_CONFIG, 19, 19); - else - BUG(); - - return enabled; -} - -bool dispc_mgr_trans_key_enabled(enum omap_channel ch) -{ - bool enabled; - - if (ch == OMAP_DSS_CHANNEL_LCD) - enabled = REG_GET(DISPC_CONFIG, 10, 10); - else if (ch == OMAP_DSS_CHANNEL_DIGIT) - enabled = REG_GET(DISPC_CONFIG, 12, 12); - else if (ch == OMAP_DSS_CHANNEL_LCD2) - enabled = REG_GET(DISPC_CONFIG2, 10, 10); - else - BUG(); - - return enabled; -} - void dispc_mgr_setup(enum omap_channel channel, struct omap_overlay_manager_info *info) { diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index a8022578c60..5ac72433be5 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -415,12 +415,6 @@ void dispc_mgr_enable_stallmode(enum omap_channel channel, bool enable); void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines); void dispc_mgr_set_lcd_display_type(enum omap_channel channel, enum omap_lcd_display_type type); -u32 dispc_mgr_get_default_color(enum omap_channel channel); -void dispc_mgr_get_trans_key(enum omap_channel ch, - enum omap_dss_trans_key_type *type, - u32 *trans_key); -bool dispc_mgr_trans_key_enabled(enum omap_channel ch); -bool dispc_mgr_alpha_fixed_zorder_enabled(enum omap_channel ch); void dispc_mgr_set_lcd_timings(enum omap_channel channel, struct omap_video_timings *timings); void dispc_mgr_set_pol_freq(enum omap_channel channel, -- cgit v1.2.3-70-g09d2 From 550a8f646c76f27ede10265b8e4c9d54c9f4af27 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 13:00:10 +0200 Subject: OMAPDSS: remove unneeded dss_ovl_wait_for_go() There's an unnecessary wrapper function, dss_ovl_wait_for_go(), which does nothing else than call dss_mgr_wait_for_go_ovl(). The dss_ovl_wait_for_go() function can be removed. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/overlay.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c index d15b826bf37..0ab14fa9d90 100644 --- a/drivers/video/omap2/dss/overlay.c +++ b/drivers/video/omap2/dss/overlay.c @@ -548,11 +548,6 @@ static void dss_ovl_get_overlay_info(struct omap_overlay *ovl, *info = ovl->info; } -static int dss_ovl_wait_for_go(struct omap_overlay *ovl) -{ - return dss_mgr_wait_for_go_ovl(ovl); -} - static int omap_dss_set_manager(struct omap_overlay *ovl, struct omap_overlay_manager *mgr) { @@ -689,7 +684,7 @@ void dss_init_overlays(struct platform_device *pdev) ovl->unset_manager = &omap_dss_unset_manager; ovl->set_overlay_info = &dss_ovl_set_overlay_info; ovl->get_overlay_info = &dss_ovl_get_overlay_info; - ovl->wait_for_go = &dss_ovl_wait_for_go; + ovl->wait_for_go = &dss_mgr_wait_for_go_ovl; ovl->caps = dss_feat_get_overlay_caps(ovl->id); ovl->supported_modes = -- cgit v1.2.3-70-g09d2 From 32eaa5841021c8d812a4f62898a6e8617d648846 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 09:04:15 +0200 Subject: OMAPDSS: add ovl/mgr_manual_update() helpers Add helper functions ovl_manual_update() and mgr_manual_update() which return whether the overlay or manager is used with a manual update display. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/manager.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 3421955c63b..8423cf85f68 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -538,7 +538,15 @@ static struct { bool irq_enabled; } dss_cache; +static bool ovl_manual_update(struct omap_overlay *ovl) +{ + return ovl->manager->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; +} +static bool mgr_manual_update(struct omap_overlay_manager *mgr) +{ + return mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; +} static int omap_dss_set_device(struct omap_overlay_manager *mgr, struct omap_dss_device *dssdev) @@ -627,7 +635,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return 0; - if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) + if (mgr_manual_update(mgr)) return 0; if (dssdev->type == OMAP_DISPLAY_TYPE_VENC @@ -696,7 +704,7 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return 0; - if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) + if (ovl_manual_update(ovl)) return 0; if (dssdev->type == OMAP_DISPLAY_TYPE_VENC @@ -1047,8 +1055,6 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) /* Configure managers */ list_for_each_entry(mgr, &manager_list, list) { - struct omap_dss_device *dssdev; - mc = &dss_cache.manager_cache[mgr->id]; if (mgr->device_changed) { @@ -1062,14 +1068,11 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) if (!mgr->device) continue; - dssdev = mgr->device; - mgr->info_dirty = false; mc->dirty = true; mc->info = mgr->info; - mc->manual_update = - dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; + mc->manual_update = mgr_manual_update(mgr); } /* Configure overlay fifos */ -- cgit v1.2.3-70-g09d2 From 209285012c792d3a0f758c7ace30af0ee4bc08a3 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 09:19:35 +0200 Subject: OMAPDSS: split omap_dss_mgr_apply() to smaller funcs Split omap_dss_mgr_apply() into smaller functions for clarity. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/manager.c | 168 +++++++++++++++++++++----------------- 1 file changed, 94 insertions(+), 74 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 8423cf85f68..d0d23157110 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -993,107 +993,92 @@ end: spin_unlock(&dss_cache.lock); } -static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) +static int omap_dss_mgr_apply_ovl(struct omap_overlay *ovl) { struct overlay_cache_data *oc; - struct manager_cache_data *mc; - int i; - struct omap_overlay *ovl; - unsigned long flags; - int r; - - DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); + struct omap_dss_device *dssdev; - r = dispc_runtime_get(); - if (r) - return r; + oc = &dss_cache.overlay_cache[ovl->id]; - spin_lock_irqsave(&dss_cache.lock, flags); + if (ovl->manager_changed) { + ovl->manager_changed = false; + ovl->info_dirty = true; + } - /* Configure overlays */ - for (i = 0; i < omap_dss_get_num_overlays(); ++i) { - struct omap_dss_device *dssdev; + if (!overlay_enabled(ovl)) { + if (oc->enabled) { + oc->enabled = false; + oc->dirty = true; + } + return 0; + } - ovl = omap_dss_get_overlay(i); + if (!ovl->info_dirty) + return 0; - oc = &dss_cache.overlay_cache[ovl->id]; + dssdev = ovl->manager->device; - if (ovl->manager_changed) { - ovl->manager_changed = false; - ovl->info_dirty = true; + if (dss_check_overlay(ovl, dssdev)) { + if (oc->enabled) { + oc->enabled = false; + oc->dirty = true; } + return -EINVAL; + } - if (!overlay_enabled(ovl)) { - if (oc->enabled) { - oc->enabled = false; - oc->dirty = true; - } - continue; - } + ovl->info_dirty = false; + oc->dirty = true; + oc->info = ovl->info; - if (!ovl->info_dirty) - continue; + oc->channel = ovl->manager->id; - dssdev = ovl->manager->device; + oc->enabled = true; - if (dss_check_overlay(ovl, dssdev)) { - if (oc->enabled) { - oc->enabled = false; - oc->dirty = true; - } - continue; - } + return 0; +} - ovl->info_dirty = false; - oc->dirty = true; - oc->info = ovl->info; +static void omap_dss_mgr_apply_mgr(struct omap_overlay_manager *mgr) +{ + struct manager_cache_data *mc; - oc->channel = ovl->manager->id; + mc = &dss_cache.manager_cache[mgr->id]; - oc->enabled = true; + if (mgr->device_changed) { + mgr->device_changed = false; + mgr->info_dirty = true; } - /* Configure managers */ - list_for_each_entry(mgr, &manager_list, list) { - mc = &dss_cache.manager_cache[mgr->id]; - - if (mgr->device_changed) { - mgr->device_changed = false; - mgr->info_dirty = true; - } + if (!mgr->info_dirty) + return; - if (!mgr->info_dirty) - continue; + if (!mgr->device) + return; - if (!mgr->device) - continue; + mgr->info_dirty = false; + mc->dirty = true; + mc->info = mgr->info; - mgr->info_dirty = false; - mc->dirty = true; - mc->info = mgr->info; - - mc->manual_update = mgr_manual_update(mgr); - } - - /* Configure overlay fifos */ - for (i = 0; i < omap_dss_get_num_overlays(); ++i) { - struct omap_dss_device *dssdev; - u32 size, burst_size; + mc->manual_update = mgr_manual_update(mgr); +} - ovl = omap_dss_get_overlay(i); +static void omap_dss_mgr_apply_ovl_fifos(struct omap_overlay *ovl) +{ + struct overlay_cache_data *oc; + struct omap_dss_device *dssdev; + u32 size, burst_size; - oc = &dss_cache.overlay_cache[ovl->id]; + oc = &dss_cache.overlay_cache[ovl->id]; - if (!oc->enabled) - continue; + if (!oc->enabled) + return; - dssdev = ovl->manager->device; + dssdev = ovl->manager->device; - size = dispc_ovl_get_fifo_size(ovl->id); + size = dispc_ovl_get_fifo_size(ovl->id); - burst_size = dispc_ovl_get_burst_size(ovl->id); + burst_size = dispc_ovl_get_burst_size(ovl->id); - switch (dssdev->type) { + switch (dssdev->type) { case OMAP_DISPLAY_TYPE_DPI: case OMAP_DISPLAY_TYPE_DBI: case OMAP_DISPLAY_TYPE_SDI: @@ -1112,7 +1097,42 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) #endif default: BUG(); - } + } +} + +static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) +{ + int i, r; + unsigned long flags; + + DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); + + r = dispc_runtime_get(); + if (r) + return r; + + spin_lock_irqsave(&dss_cache.lock, flags); + + /* Configure overlays */ + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + + ovl = omap_dss_get_overlay(i); + + omap_dss_mgr_apply_ovl(ovl); + } + + /* Configure managers */ + list_for_each_entry(mgr, &manager_list, list) + omap_dss_mgr_apply_mgr(mgr); + + /* Configure overlay fifos */ + for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + struct omap_overlay *ovl; + + ovl = omap_dss_get_overlay(i); + + omap_dss_mgr_apply_ovl_fifos(ovl); } r = 0; -- cgit v1.2.3-70-g09d2 From d2bbb9bbd1503e8b5235fe316e7ee0c7f41daf7e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 09:23:10 +0200 Subject: OMAPDSS: apply affects only one overlay manager omap_dss_mgr_apply currently applies settings to all overlays and overlay managers. The reason for this was to support cases where configuration changes affecting multiple managers are made. However, the current code doesn't support changing such configurations, so the functionality is not needed. Change the apply to affect only the manager given as an argument, and the overlays attached to that manager. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/manager.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index d0d23157110..d2bdd652d59 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -1114,23 +1114,28 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) spin_lock_irqsave(&dss_cache.lock, flags); /* Configure overlays */ - for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + for (i = 0; i < mgr->num_overlays; ++i) { struct omap_overlay *ovl; - ovl = omap_dss_get_overlay(i); + ovl = mgr->overlays[i]; + + if (ovl->manager != mgr) + continue; omap_dss_mgr_apply_ovl(ovl); } - /* Configure managers */ - list_for_each_entry(mgr, &manager_list, list) - omap_dss_mgr_apply_mgr(mgr); + /* Configure manager */ + omap_dss_mgr_apply_mgr(mgr); /* Configure overlay fifos */ - for (i = 0; i < omap_dss_get_num_overlays(); ++i) { + for (i = 0; i < mgr->num_overlays; ++i) { struct omap_overlay *ovl; - ovl = omap_dss_get_overlay(i); + ovl = mgr->overlays[i]; + + if (ovl->manager != mgr) + continue; omap_dss_mgr_apply_ovl_fifos(ovl); } -- cgit v1.2.3-70-g09d2 From 58f2554807a7dc627f1583d1d4363b85758cf685 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 4 Nov 2011 09:48:54 +0200 Subject: OMAPDSS: create apply.c Create a new file, apply.c, and move code about handling the apply-mechanism and configuration of the managers and overlays from manager.c to apply.c. Not all related code is moved in this patch, but only the core apply/configure functions. The later patches move rest of the code from overlay.c and manager.c, adding necessary locking at the same time. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/Makefile | 3 +- drivers/video/omap2/dss/apply.c | 656 ++++++++++++++++++++++++++++++++++++++ drivers/video/omap2/dss/core.c | 2 + drivers/video/omap2/dss/dss.h | 9 +- drivers/video/omap2/dss/manager.c | 621 ------------------------------------ 5 files changed, 667 insertions(+), 624 deletions(-) create mode 100644 drivers/video/omap2/dss/apply.c (limited to 'drivers/video') diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile index bd34ac5b202..8594522184d 100644 --- a/drivers/video/omap2/dss/Makefile +++ b/drivers/video/omap2/dss/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_OMAP2_DSS) += omapdss.o -omapdss-y := core.o dss.o dss_features.o dispc.o display.o manager.o overlay.o +omapdss-y := core.o dss.o dss_features.o dispc.o display.o manager.o overlay.o \ + apply.o omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c new file mode 100644 index 00000000000..c634c986293 --- /dev/null +++ b/drivers/video/omap2/dss/apply.c @@ -0,0 +1,656 @@ +/* + * Copyright (C) 2011 Texas Instruments + * Author: Tomi Valkeinen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#define DSS_SUBSYS_NAME "APPLY" + +#include +#include +#include +#include + +#include