From a218d19f6a91c076c7ed8a7c0082f777248c5394 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Tue, 20 Dec 2011 00:08:56 +0100
Subject: omapfb: lcd_ams_delta: drive control lines over GPIO

Don't use Amstrad Delta custom I/O functions any longer, use GPIO API
instead.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap/lcd_ams_delta.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 6978ae4ef83..73b211b92a3 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -25,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/lcd.h>
+#include <linux/gpio.h>
 
 #include <plat/board-ams-delta.h>
 #include <mach/hardware.h>
@@ -98,29 +99,41 @@ static struct lcd_ops ams_delta_lcd_ops = {
 
 /* omapfb panel section */
 
+static struct gpio _gpios[] __initconst_or_module = {
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_LCD_VBLEN,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "lcd_vblen",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_LCD_NDISP,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "lcd_ndisp",
+	},
+};
+
 static int ams_delta_panel_init(struct lcd_panel *panel,
 		struct omapfb_device *fbdev)
 {
-	return 0;
+	return gpio_request_array(_gpios, ARRAY_SIZE(_gpios));
 }
 
 static void ams_delta_panel_cleanup(struct lcd_panel *panel)
 {
+	gpio_free_array(_gpios, ARRAY_SIZE(_gpios));
 }
 
 static int ams_delta_panel_enable(struct lcd_panel *panel)
 {
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP,
-			AMS_DELTA_LATCH2_LCD_NDISP);
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN,
-			AMS_DELTA_LATCH2_LCD_VBLEN);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1);
 	return 0;
 }
 
 static void ams_delta_panel_disable(struct lcd_panel *panel)
 {
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, 0);
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, 0);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0);
+	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0);
 }
 
 static unsigned long ams_delta_panel_get_caps(struct lcd_panel *panel)
-- 
cgit v1.2.3-70-g09d2


From e6b0f884520e604408ebda3b60605cabe0a8d162 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 13 Jan 2012 13:24:04 +0200
Subject: OMAPDSS: FEAT: Add FIFO_MERGE feature

Add feature flag for fifo merge. OMAP2 doesn't contain fifo merge, later
OMAPs do.

dispc_enable_fifomerge() checks for the flag when called, and gives a
WARN if fifo merge is being enabled when it is not supported.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 5 +++++
 drivers/video/omap2/dss/dss_features.c | 9 +++++----
 drivers/video/omap2/dss/dss_features.h | 1 +
 3 files changed, 11 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a5ec7f37c18..d711518f9f1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1054,6 +1054,11 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
 
 void dispc_enable_fifomerge(bool enable)
 {
+	if (!dss_has_feature(FEAT_FIFO_MERGE)) {
+		WARN_ON(enable);
+		return;
+	}
+
 	DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
 	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
 }
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index afcb59301c3..c2456c5bcd3 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -370,7 +370,7 @@ static const struct omap_dss_features omap3430_dss_features = {
 		FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
 		FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
 		FEAT_VENC_REQUIRES_TV_DAC_CLK | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER,
+		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -394,7 +394,7 @@ static const struct omap_dss_features omap3630_dss_features = {
 		FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
 		FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
 		FEAT_DSI_PLL_FREQSEL | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER,
+		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -419,7 +419,7 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 		FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
 		FEAT_DSI_GNQ | FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 |
 		FEAT_CPR | FEAT_PRELOAD | FEAT_FIR_COEF_V |
-		FEAT_ALPHA_FREE_ZORDER,
+		FEAT_ALPHA_FREE_ZORDER | FEAT_FIFO_MERGE,
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
@@ -443,7 +443,8 @@ static const struct omap_dss_features omap4_dss_features = {
 		FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
 		FEAT_DSI_GNQ | FEAT_HDMI_CTS_SWMODE |
 		FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 | FEAT_CPR |
-		FEAT_PRELOAD | FEAT_FIR_COEF_V | FEAT_ALPHA_FREE_ZORDER,
+		FEAT_PRELOAD | FEAT_FIR_COEF_V | FEAT_ALPHA_FREE_ZORDER |
+		FEAT_FIFO_MERGE,
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index cd833bbaac3..50caee9192a 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -58,6 +58,7 @@ enum dss_feat_id {
 	FEAT_FIR_COEF_V			= 1 << 25,
 	FEAT_ALPHA_FIXED_ZORDER		= 1 << 26,
 	FEAT_ALPHA_FREE_ZORDER		= 1 << 27,
+	FEAT_FIFO_MERGE			= 1 << 28,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.3-70-g09d2


From fb0119742291b6f30cd97026ee137b2d3d1f4de8 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 16 Nov 2011 15:00:22 +0200
Subject: OMAPDSS: APPLY: add fifo merge support funcs

Add mechanism to set/unset the DISPC fifo-merge:

Add new fields to dss_data, fifo_merge and fifo_merge_dirty. These are
similar to the other info/dirty flags in ovl_priv_data and ovl_mgr_data,
but fifo merge is a common attribute to all managers and thus outside
the ovl_mgr_data.

The fifo-merge field is used in the dss_write_regs_common, which handles
writing the register.

dss_apply_fifo_merge() can be used to set/unset the fifo merge field in
the dss_data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 43 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 052dc874cd3..604737f1187 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -105,6 +105,9 @@ static struct {
 	struct ovl_priv_data ovl_priv_data_array[MAX_DSS_OVERLAYS];
 	struct mgr_priv_data mgr_priv_data_array[MAX_DSS_MANAGERS];
 
+	bool fifo_merge_dirty;
+	bool fifo_merge;
+
 	bool irq_enabled;
 } dss_data;
 
@@ -585,11 +588,40 @@ static void dss_mgr_write_regs(struct omap_overlay_manager *mgr)
 	}
 }
 
+static void dss_write_regs_common(void)
+{
+	const int num_mgrs = omap_dss_get_num_overlay_managers();
+	int i;
+
+	if (!dss_data.fifo_merge_dirty)
+		return;
+
+	for (i = 0; i < num_mgrs; ++i) {
+		struct omap_overlay_manager *mgr;
+		struct mgr_priv_data *mp;
+
+		mgr = omap_dss_get_overlay_manager(i);
+		mp = get_mgr_priv(mgr);
+
+		if (mp->enabled) {
+			if (dss_data.fifo_merge_dirty) {
+				dispc_enable_fifomerge(dss_data.fifo_merge);
+				dss_data.fifo_merge_dirty = false;
+			}
+
+			if (mp->updating)
+				mp->shadow_info_dirty = true;
+		}
+	}
+}
+
 static void dss_write_regs(void)
 {
 	const int num_mgrs = omap_dss_get_num_overlay_managers();
 	int i;
 
+	dss_write_regs_common();
+
 	for (i = 0; i < num_mgrs; ++i) {
 		struct omap_overlay_manager *mgr;
 		struct mgr_priv_data *mp;
@@ -659,6 +691,8 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 
 	dss_mgr_write_regs(mgr);
 
+	dss_write_regs_common();
+
 	mp->updating = true;
 
 	if (!dss_data.irq_enabled && need_isr())
@@ -859,6 +893,15 @@ static void dss_apply_ovl_fifo_thresholds(struct omap_overlay *ovl,
 	op->extra_info_dirty = true;
 }
 
+static void dss_apply_fifo_merge(bool use_fifo_merge)
+{
+	if (dss_data.fifo_merge == use_fifo_merge)
+		return;
+
+	dss_data.fifo_merge = use_fifo_merge;
+	dss_data.fifo_merge_dirty = true;
+}
+
 static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
-- 
cgit v1.2.3-70-g09d2


From 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 16 Nov 2011 16:44:08 +0200
Subject: OMAPDSS: APPLY: add fifo-merge support

Add fifo-merge support. This is done mainly in four functions:
mgr_enable/disable and ovl_enable/disable. These are the functions where
overlays are taken into and out of active use.

The process to enable and disable fifo-merge is not simple. We need to
do it in steps, waiting in between for certain settings to be taken into
use, and continuing after that. The reason for this is that fifo-merge
is a common thing for all managers/overlays, and its use must be
synchronized.

As an example, when we disable an overlay, we first set the overlay as
disabled, then wait until the overlay is actually disabled in the HW,
and only after that we may re-configure the fifos, possibly taking
fifo-merge into use.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 164 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 156 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 604737f1187..6f7b213e096 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -902,7 +902,8 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
 	dss_data.fifo_merge_dirty = true;
 }
 
-static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
+static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
+		bool use_fifo_merge)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	struct omap_dss_device *dssdev;
@@ -914,7 +915,16 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
 
 	dssdev = ovl->manager->device;
 
-	size = dispc_ovl_get_fifo_size(ovl->id);
+	if (use_fifo_merge) {
+		int i;
+
+		size = 0;
+
+		for (i = 0; i < omap_dss_get_num_overlays(); ++i)
+			size += dispc_ovl_get_fifo_size(i);
+	} else {
+		size = dispc_ovl_get_fifo_size(ovl->id);
+	}
 
 	burst_size = dispc_ovl_get_burst_size(ovl->id);
 
@@ -940,7 +950,8 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
 	dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
 }
 
-static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr)
+static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
+		bool use_fifo_merge)
 {
 	struct omap_overlay *ovl;
 	struct mgr_priv_data *mp;
@@ -951,10 +962,10 @@ static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr)
 		return;
 
 	list_for_each_entry(ovl, &mgr->overlays, list)
-		dss_ovl_setup_fifo(ovl);
+		dss_ovl_setup_fifo(ovl, use_fifo_merge);
 }
 
-static void dss_setup_fifos(void)
+static void dss_setup_fifos(bool use_fifo_merge)
 {
 	const int num_mgrs = omap_dss_get_num_overlay_managers();
 	struct omap_overlay_manager *mgr;
@@ -962,15 +973,91 @@ static void dss_setup_fifos(void)
 
 	for (i = 0; i < num_mgrs; ++i) {
 		mgr = omap_dss_get_overlay_manager(i);
-		dss_mgr_setup_fifos(mgr);
+		dss_mgr_setup_fifos(mgr, use_fifo_merge);
 	}
 }
 
+static int get_num_used_managers(void)
+{
+	const int num_mgrs = omap_dss_get_num_overlay_managers();
+	struct omap_overlay_manager *mgr;
+	struct mgr_priv_data *mp;
+	int i;
+	int enabled_mgrs;
+
+	enabled_mgrs = 0;
+
+	for (i = 0; i < num_mgrs; ++i) {
+		mgr = omap_dss_get_overlay_manager(i);
+		mp = get_mgr_priv(mgr);
+
+		if (!mp->enabled)
+			continue;
+
+		enabled_mgrs++;
+	}
+
+	return enabled_mgrs;
+}
+
+static int get_num_used_overlays(void)
+{
+	const int num_ovls = omap_dss_get_num_overlays();
+	struct omap_overlay *ovl;
+	struct ovl_priv_data *op;
+	struct mgr_priv_data *mp;
+	int i;
+	int enabled_ovls;
+
+	enabled_ovls = 0;
+
+	for (i = 0; i < num_ovls; ++i) {
+		ovl = omap_dss_get_overlay(i);
+		op = get_ovl_priv(ovl);
+
+		if (!op->enabled && !op->enabling)
+			continue;
+
+		mp = get_mgr_priv(ovl->manager);
+
+		if (!mp->enabled)
+			continue;
+
+		enabled_ovls++;
+	}
+
+	return enabled_ovls;
+}
+
+static bool get_use_fifo_merge(void)
+{
+	int enabled_mgrs = get_num_used_managers();
+	int enabled_ovls = get_num_used_overlays();
+
+	if (!dss_has_feature(FEAT_FIFO_MERGE))
+		return false;
+
+	/*
+	 * In theory the only requirement for fifomerge is enabled_ovls <= 1.
+	 * However, if we have two managers enabled and set/unset the fifomerge,
+	 * we need to set the GO bits in particular sequence for the managers,
+	 * and wait in between.
+	 *
+	 * This is rather difficult as new apply calls can happen at any time,
+	 * so we simplify the problem by requiring also that enabled_mgrs <= 1.
+	 * In practice this shouldn't matter, because when only one overlay is
+	 * enabled, most likely only one output is enabled.
+	 */
+
+	return enabled_mgrs <= 1 && enabled_ovls <= 1;
+}
+
 int dss_mgr_enable(struct omap_overlay_manager *mgr)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 	unsigned long flags;
 	int r;
+	bool fifo_merge;
 
 	mutex_lock(&apply_lock);
 
@@ -988,11 +1075,23 @@ int dss_mgr_enable(struct omap_overlay_manager *mgr)
 		goto err;
 	}
 
-	dss_setup_fifos();
+	/* step 1: setup fifos/fifomerge before enabling the manager */
+
+	fifo_merge = get_use_fifo_merge();
+	dss_setup_fifos(fifo_merge);
+	dss_apply_fifo_merge(fifo_merge);
 
 	dss_write_regs();
 	dss_set_go_bits();
 
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	/* wait until fifo config is in */
+	wait_pending_extra_info_updates();
+
+	/* step 2: enable the manager */
+	spin_lock_irqsave(&data_lock, flags);
+
 	if (!mgr_manual_update(mgr))
 		mp->updating = true;
 
@@ -1017,6 +1116,7 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 	unsigned long flags;
+	bool fifo_merge;
 
 	mutex_lock(&apply_lock);
 
@@ -1031,8 +1131,16 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
 	mp->updating = false;
 	mp->enabled = false;
 
+	fifo_merge = get_use_fifo_merge();
+	dss_setup_fifos(fifo_merge);
+	dss_apply_fifo_merge(fifo_merge);
+
+	dss_write_regs();
+	dss_set_go_bits();
+
 	spin_unlock_irqrestore(&data_lock, flags);
 
+	wait_pending_extra_info_updates();
 out:
 	mutex_unlock(&apply_lock);
 }
@@ -1284,6 +1392,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	unsigned long flags;
+	bool fifo_merge;
 	int r;
 
 	mutex_lock(&apply_lock);
@@ -1309,7 +1418,22 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 		goto err2;
 	}
 
-	dss_setup_fifos();
+	/* step 1: configure fifos/fifomerge for currently enabled ovls */
+
+	fifo_merge = get_use_fifo_merge();
+	dss_setup_fifos(fifo_merge);
+	dss_apply_fifo_merge(fifo_merge);
+
+	dss_write_regs();
+	dss_set_go_bits();
+
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	/* wait for fifo configs to go in */
+	wait_pending_extra_info_updates();
+
+	/* step 2: enable the overlay */
+	spin_lock_irqsave(&data_lock, flags);
 
 	op->enabling = false;
 	dss_apply_ovl_enable(ovl, true);
@@ -1319,6 +1443,9 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
+	/* wait for overlay to be enabled */
+	wait_pending_extra_info_updates();
+
 	mutex_unlock(&apply_lock);
 
 	return 0;
@@ -1334,6 +1461,7 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	unsigned long flags;
+	bool fifo_merge;
 	int r;
 
 	mutex_lock(&apply_lock);
@@ -1348,14 +1476,34 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 		goto err;
 	}
 
+	/* step 1: disable the overlay */
 	spin_lock_irqsave(&data_lock, flags);
 
 	dss_apply_ovl_enable(ovl, false);
+
 	dss_write_regs();
 	dss_set_go_bits();
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
+	/* wait for the overlay to be disabled */
+	wait_pending_extra_info_updates();
+
+	/* step 2: configure fifos/fifomerge */
+	spin_lock_irqsave(&data_lock, flags);
+
+	fifo_merge = get_use_fifo_merge();
+	dss_setup_fifos(fifo_merge);
+	dss_apply_fifo_merge(fifo_merge);
+
+	dss_write_regs();
+	dss_set_go_bits();
+
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	/* wait for fifo config to go in */
+	wait_pending_extra_info_updates();
+
 	mutex_unlock(&apply_lock);
 
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 3cb5d966e233167fcbeb7c7d7a66294e13ee9d90 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 13 Jan 2012 13:14:57 +0200
Subject: OMAPDSS: DISPC: print fifo threshold values in bytes

Fifo thresholds are calculated using bytes, but the debug print prints
values in buffer units. Change the prints to use bytes to be in line
with the calculations, and also to print in the same units on all OMAPs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d711518f9f1..ba907bd6009 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1039,13 +1039,13 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
 	dss_feat_get_reg_field(FEAT_REG_FIFOHIGHTHRESHOLD, &hi_start, &hi_end);
 	dss_feat_get_reg_field(FEAT_REG_FIFOLOWTHRESHOLD, &lo_start, &lo_end);
 
-	DSSDBG("fifo(%d) low/high old %u/%u, new %u/%u\n",
+	DSSDBG("fifo(%d) threshold (bytes), old %u/%u, new %u/%u\n",
 			plane,
 			REG_GET(DISPC_OVL_FIFO_THRESHOLD(plane),
-				lo_start, lo_end),
+				lo_start, lo_end) * unit,
 			REG_GET(DISPC_OVL_FIFO_THRESHOLD(plane),
-				hi_start, hi_end),
-			low, high);
+				hi_start, hi_end) * unit,
+			low * unit, high * unit);
 
 	dispc_write_reg(DISPC_OVL_FIFO_THRESHOLD(plane),
 			FLD_VAL(high, hi_start, hi_end) |
-- 
cgit v1.2.3-70-g09d2


From 83fa2f2e940dc21a204cff697d84d37214a91708 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 13 Jan 2012 13:17:01 +0200
Subject: OMAPDSS: DISPC: move fifo threhold calc to dispc.c

Move fifo threshold calculation into dispc.c, as the thresholds are
really dispc internal thing.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c   | 34 ++--------------------------------
 drivers/video/omap2/dss/dispc.c   | 22 ++++++++++++++++++++--
 drivers/video/omap2/dss/display.c | 10 ----------
 drivers/video/omap2/dss/dsi.c     |  8 --------
 drivers/video/omap2/dss/dss.h     | 10 ++--------
 5 files changed, 24 insertions(+), 60 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 6f7b213e096..b0264a16465 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -907,7 +907,6 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	struct omap_dss_device *dssdev;
-	u32 size, burst_size;
 	u32 fifo_low, fifo_high;
 
 	if (!op->enabled && !op->enabling)
@@ -915,37 +914,8 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
 
 	dssdev = ovl->manager->device;
 
-	if (use_fifo_merge) {
-		int i;
-
-		size = 0;
-
-		for (i = 0; i < omap_dss_get_num_overlays(); ++i)
-			size += dispc_ovl_get_fifo_size(i);
-	} else {
-		size = dispc_ovl_get_fifo_size(ovl->id);
-	}
-
-	burst_size = dispc_ovl_get_burst_size(ovl->id);
-
-	switch (dssdev->type) {
-	case OMAP_DISPLAY_TYPE_DPI:
-	case OMAP_DISPLAY_TYPE_DBI:
-	case OMAP_DISPLAY_TYPE_SDI:
-	case OMAP_DISPLAY_TYPE_VENC:
-	case OMAP_DISPLAY_TYPE_HDMI:
-		default_get_overlay_fifo_thresholds(ovl->id, size,
-				burst_size, &fifo_low, &fifo_high);
-		break;
-#ifdef CONFIG_OMAP2_DSS_DSI
-	case OMAP_DISPLAY_TYPE_DSI:
-		dsi_get_overlay_fifo_thresholds(ovl->id, size,
-				burst_size, &fifo_low, &fifo_high);
-		break;
-#endif
-	default:
-		BUG();
-	}
+	dispc_ovl_compute_fifo_thresholds(ovl->id, &fifo_low, &fifo_high,
+			use_fifo_merge);
 
 	dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
 }
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ba907bd6009..a75972250a2 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -909,7 +909,7 @@ static void dispc_configure_burst_sizes(void)
 		dispc_ovl_set_burst_size(i, burst_size);
 }
 
-u32 dispc_ovl_get_burst_size(enum omap_plane plane)
+static u32 dispc_ovl_get_burst_size(enum omap_plane plane)
 {
 	unsigned unit = dss_feat_get_burst_size_unit();
 	/* burst multiplier is always x8 (see dispc_configure_burst_sizes()) */
@@ -1018,7 +1018,7 @@ static void dispc_read_plane_fifo_sizes(void)
 	}
 }
 
-u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
+static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
 {
 	return dispc.fifo_size[plane];
 }
@@ -1063,6 +1063,24 @@ void dispc_enable_fifomerge(bool enable)
 	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
 }
 
+void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
+		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge)
+{
+	/*
+	 * All sizes are in bytes. Both the buffer and burst are made of
+	 * buffer_units, and the fifo thresholds must be buffer_unit aligned.
+	 */
+
+	unsigned buf_unit = dss_feat_get_buffer_size_unit();
+	unsigned fifo_size, burst_size;
+
+	burst_size = dispc_ovl_get_burst_size(plane);
+	fifo_size = dispc_ovl_get_fifo_size(plane);
+
+	*fifo_low = fifo_size - burst_size;
+	*fifo_high = fifo_size - buf_unit;
+}
+
 static void dispc_ovl_set_fir(enum omap_plane plane,
 				int hinc, int vinc,
 				enum omap_color_component color_comp)
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index be331dc5a61..4424c198dbc 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -279,16 +279,6 @@ void omapdss_default_get_resolution(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_default_get_resolution);
 
-void default_get_overlay_fifo_thresholds(enum omap_plane plane,
-		u32 fifo_size, u32 burst_size,
-		u32 *fifo_low, u32 *fifo_high)
-{
-	unsigned buf_unit = dss_feat_get_buffer_size_unit();
-
-	*fifo_high = fifo_size - buf_unit;
-	*fifo_low = fifo_size - burst_size;
-}
-
 int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 {
 	switch (dssdev->type) {
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d4d676c82c1..a4b9d58e8b4 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4524,14 +4524,6 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 }
 EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
-void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
-		u32 fifo_size, u32 burst_size,
-		u32 *fifo_low, u32 *fifo_high)
-{
-	*fifo_high = fifo_size - burst_size;
-	*fifo_low = fifo_size - burst_size * 2;
-}
-
 int dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 32ff69fb333..d4b3dff2ead 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -202,9 +202,6 @@ void dss_uninit_device(struct platform_device *pdev,
 		struct omap_dss_device *dssdev);
 bool dss_use_replication(struct omap_dss_device *dssdev,
 		enum omap_color_mode mode);
-void default_get_overlay_fifo_thresholds(enum omap_plane plane,
-		u32 fifo_size, u32 burst_size,
-		u32 *fifo_low, u32 *fifo_high);
 
 /* manager */
 int dss_init_overlay_managers(struct platform_device *pdev);
@@ -313,9 +310,6 @@ int dsi_pll_calc_clock_div_pck(struct platform_device *dsidev, bool is_tft,
 int dsi_pll_init(struct platform_device *dsidev, bool enable_hsclk,
 		bool enable_hsdiv);
 void dsi_pll_uninit(struct platform_device *dsidev, bool disconnect_lanes);
-void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
-		u32 fifo_size, u32 burst_size,
-		u32 *fifo_low, u32 *fifo_high);
 void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev);
 void dsi_wait_pll_hsdiv_dsi_active(struct platform_device *dsidev);
 struct platform_device *dsi_get_dsidev_from_id(int module);
@@ -429,8 +423,8 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
 
 
 void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
-u32 dispc_ovl_get_fifo_size(enum omap_plane plane);
-u32 dispc_ovl_get_burst_size(enum omap_plane plane);
+void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
+		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge);
 int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 		bool ilace, bool replication);
 int dispc_ovl_enable(enum omap_plane plane, bool enable);
-- 
cgit v1.2.3-70-g09d2


From e0e405b9252e5e8926786d796e0d4293bc90cd56 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 13 Jan 2012 13:18:11 +0200
Subject: OMAPDSS: DISPC: Add naive threshold calc for fifomerge

Take fifo merge into use by implementing a rather naive fifo merge
threshold calculation: keep the low threshold always the same, but
increase the high threshold when fifo merge is used.

This should greatly increase the time between pixel data fetches from
SDRAM, as the usable fifo size is much larger. However, it probably
won't help for fifo underflows, as the low threshols is kept the same.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 28 ++++++++++++++++++++++++----
 drivers/video/omap2/dss/dss_features.c |  6 ++++--
 drivers/video/omap2/dss/dss_features.h |  2 ++
 3 files changed, 30 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a75972250a2..374c987038a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1072,13 +1072,33 @@ void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 	 */
 
 	unsigned buf_unit = dss_feat_get_buffer_size_unit();
-	unsigned fifo_size, burst_size;
+	unsigned ovl_fifo_size, total_fifo_size, burst_size;
+	int i;
 
 	burst_size = dispc_ovl_get_burst_size(plane);
-	fifo_size = dispc_ovl_get_fifo_size(plane);
+	ovl_fifo_size = dispc_ovl_get_fifo_size(plane);
 
-	*fifo_low = fifo_size - burst_size;
-	*fifo_high = fifo_size - buf_unit;
+	if (use_fifomerge) {
+		total_fifo_size = 0;
+		for (i = 0; i < omap_dss_get_num_overlays(); ++i)
+			total_fifo_size += dispc_ovl_get_fifo_size(i);
+	} else {
+		total_fifo_size = ovl_fifo_size;
+	}
+
+	/*
+	 * We use the same low threshold for both fifomerge and non-fifomerge
+	 * cases, but for fifomerge we calculate the high threshold using the
+	 * combined fifo size
+	 */
+
+	if (dss_has_feature(FEAT_OMAP3_DSI_FIFO_BUG)) {
+		*fifo_low = ovl_fifo_size - burst_size * 2;
+		*fifo_high = total_fifo_size - burst_size;
+	} else {
+		*fifo_low = ovl_fifo_size - burst_size;
+		*fifo_high = total_fifo_size - buf_unit;
+	}
 }
 
 static void dispc_ovl_set_fir(enum omap_plane plane,
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index c2456c5bcd3..419419ad049 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -370,7 +370,8 @@ static const struct omap_dss_features omap3430_dss_features = {
 		FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
 		FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
 		FEAT_VENC_REQUIRES_TV_DAC_CLK | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE,
+		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE |
+		FEAT_OMAP3_DSI_FIFO_BUG,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -394,7 +395,8 @@ static const struct omap_dss_features omap3630_dss_features = {
 		FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
 		FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
 		FEAT_DSI_PLL_FREQSEL | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE,
+		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE |
+		FEAT_OMAP3_DSI_FIFO_BUG,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 50caee9192a..5f9b8215677 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -59,6 +59,8 @@ enum dss_feat_id {
 	FEAT_ALPHA_FIXED_ZORDER		= 1 << 26,
 	FEAT_ALPHA_FREE_ZORDER		= 1 << 27,
 	FEAT_FIFO_MERGE			= 1 << 28,
+	/* An unknown HW bug causing the normal FIFO thresholds not to work */
+	FEAT_OMAP3_DSI_FIFO_BUG		= 1 << 29,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.3-70-g09d2


From aeec1a6ccbe28c2cea5f19803394f99859566552 Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Fri, 6 Jan 2012 17:52:07 +0530
Subject: OMAPDSS: HDMI: remove duplicate video interface code

video interface structure is a duplicate structure with parameters which are
already present in ip_data config structure, Thus removing the structure and
modifying corresponding code.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 31 ++++++++-----------------------
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h |  7 -------
 2 files changed, 8 insertions(+), 30 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 9af81f18f16..bafbd9fad4b 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -629,8 +629,7 @@ static void hdmi_core_av_packet_config(struct hdmi_ip_data *ip_data,
 }
 
 static void hdmi_wp_init(struct omap_video_timings *timings,
-			struct hdmi_video_format *video_fmt,
-			struct hdmi_video_interface *video_int)
+			struct hdmi_video_format *video_fmt)
 {
 	pr_debug("Enter hdmi_wp_init\n");
 
@@ -645,12 +644,6 @@ static void hdmi_wp_init(struct omap_video_timings *timings,
 	video_fmt->y_res = 0;
 	video_fmt->x_res = 0;
 
-	video_int->vsp = 0;
-	video_int->hsp = 0;
-
-	video_int->interlacing = 0;
-	video_int->tm = 0; /* HDMI_TIMING_SLAVE */
-
 }
 
 void ti_hdmi_4xxx_wp_video_start(struct hdmi_ip_data *ip_data, bool start)
@@ -687,17 +680,16 @@ static void hdmi_wp_video_config_format(struct hdmi_ip_data *ip_data,
 	hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_SIZE, l);
 }
 
-static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data,
-		struct hdmi_video_interface *video_int)
+static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data)
 {
 	u32 r;
 	pr_debug("Enter hdmi_wp_video_config_interface\n");
 
 	r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG);
-	r = FLD_MOD(r, video_int->vsp, 7, 7);
-	r = FLD_MOD(r, video_int->hsp, 6, 6);
-	r = FLD_MOD(r, video_int->interlacing, 3, 3);
-	r = FLD_MOD(r, video_int->tm, 1, 0);
+	r = FLD_MOD(r, ip_data->cfg.timings.vsync_pol, 7, 7);
+	r = FLD_MOD(r, ip_data->cfg.timings.hsync_pol, 6, 6);
+	r = FLD_MOD(r, ip_data->cfg.interlace, 3, 3);
+	r = FLD_MOD(r, 1, 1, 0); /* HDMI_TIMING_MASTER_24BIT */
 	hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, r);
 }
 
@@ -725,15 +717,13 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
 	/* HDMI */
 	struct omap_video_timings video_timing;
 	struct hdmi_video_format video_format;
-	struct hdmi_video_interface video_interface;
 	/* HDMI core */
 	struct hdmi_core_infoframe_avi avi_cfg;
 	struct hdmi_core_video_config v_core_cfg;
 	struct hdmi_core_packet_enable_repeat repeat_cfg;
 	struct hdmi_config *cfg = &ip_data->cfg;
 
-	hdmi_wp_init(&video_timing, &video_format,
-		&video_interface);
+	hdmi_wp_init(&video_timing, &video_format);
 
 	hdmi_core_init(&v_core_cfg,
 		&avi_cfg,
@@ -748,12 +738,7 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
 
 	hdmi_wp_video_config_format(ip_data, &video_format);
 
-	video_interface.vsp = cfg->timings.vsync_pol;
-	video_interface.hsp = cfg->timings.hsync_pol;
-	video_interface.interlacing = cfg->interlace;
-	video_interface.tm = 1 ; /* HDMI_TIMING_MASTER_24BIT */
-
-	hdmi_wp_video_config_interface(ip_data, &video_interface);
+	hdmi_wp_video_config_interface(ip_data);
 
 	/*
 	 * configure core video part
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index a442998980f..004b4182bdd 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -517,13 +517,6 @@ struct hdmi_video_format {
 	u32			x_res;	/* pixel per line */
 };
 
-struct hdmi_video_interface {
-	int	vsp;	/* Vsync polarity */
-	int	hsp;	/* Hsync polarity */
-	int	interlacing;
-	int	tm;	/* Timing mode */
-};
-
 struct hdmi_audio_format {
 	enum hdmi_stereo_channels		stereo_channels;
 	u8					active_chnnls_msk;
-- 
cgit v1.2.3-70-g09d2


From a05ce78f308fa22b6254995c25ff79e82a27de75 Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Fri, 6 Jan 2012 17:52:08 +0530
Subject: OMAPDSS: HDMI: update static timing table

Add the vsync polarity, hsync polarity, interlace to hdmi_video_timings.
Remove the now duplicate structure hdmi_timings.
update the static table structure in HDMI with CEA/VESA code and mode.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c            | 96 +++++++++++++++----------------
 drivers/video/omap2/dss/ti_hdmi.h         | 14 ++---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 20 +++----
 3 files changed, 63 insertions(+), 67 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index b4c270edb91..266af264eb9 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -88,42 +88,42 @@ static struct {
  * map it to corresponding CEA or VESA index.
  */
 
-static const struct hdmi_timings cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = {
-	{ {640, 480, 25200, 96, 16, 48, 2, 10, 33} , 0 , 0},
-	{ {1280, 720, 74250, 40, 440, 220, 5, 5, 20}, 1, 1},
-	{ {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1},
-	{ {720, 480, 27027, 62, 16, 60, 6, 9, 30}, 0, 0},
-	{ {2880, 576, 108000, 256, 48, 272, 5, 5, 39}, 0, 0},
-	{ {1440, 240, 27027, 124, 38, 114, 3, 4, 15}, 0, 0},
-	{ {1440, 288, 27000, 126, 24, 138, 3, 2, 19}, 0, 0},
-	{ {1920, 540, 74250, 44, 528, 148, 5, 2, 15}, 1, 1},
-	{ {1920, 540, 74250, 44, 88, 148, 5, 2, 15}, 1, 1},
-	{ {1920, 1080, 148500, 44, 88, 148, 5, 4, 36}, 1, 1},
-	{ {720, 576, 27000, 64, 12, 68, 5, 5, 39}, 0, 0},
-	{ {1440, 576, 54000, 128, 24, 136, 5, 5, 39}, 0, 0},
-	{ {1920, 1080, 148500, 44, 528, 148, 5, 4, 36}, 1, 1},
-	{ {2880, 480, 108108, 248, 64, 240, 6, 9, 30}, 0, 0},
-	{ {1920, 1080, 74250, 44, 638, 148, 5, 4, 36}, 1, 1},
-	/* VESA From Here */
-	{ {640, 480, 25175, 96, 16, 48, 2 , 11, 31}, 0, 0},
-	{ {800, 600, 40000, 128, 40, 88, 4 , 1, 23}, 1, 1},
-	{ {848, 480, 33750, 112, 16, 112, 8 , 6, 23}, 1, 1},
-	{ {1280, 768, 79500, 128, 64, 192, 7 , 3, 20}, 1, 0},
-	{ {1280, 800, 83500, 128, 72, 200, 6 , 3, 22}, 1, 0},
-	{ {1360, 768, 85500, 112, 64, 256, 6 , 3, 18}, 1, 1},
-	{ {1280, 960, 108000, 112, 96, 312, 3 , 1, 36}, 1, 1},
-	{ {1280, 1024, 108000, 112, 48, 248, 3 , 1, 38}, 1, 1},
-	{ {1024, 768, 65000, 136, 24, 160, 6, 3, 29}, 0, 0},
-	{ {1400, 1050, 121750, 144, 88, 232, 4, 3, 32}, 1, 0},
-	{ {1440, 900, 106500, 152, 80, 232, 6, 3, 25}, 1, 0},
-	{ {1680, 1050, 146250, 176 , 104, 280, 6, 3, 30}, 1, 0},
-	{ {1366, 768, 85500, 143, 70, 213, 3, 3, 24}, 1, 1},
-	{ {1920, 1080, 148500, 44, 148, 80, 5, 4, 36}, 1, 1},
-	{ {1280, 768, 68250, 32, 48, 80, 7, 3, 12}, 0, 1},
-	{ {1400, 1050, 101000, 32, 48, 80, 4, 3, 23}, 0, 1},
-	{ {1680, 1050, 119000, 32, 48, 80, 6, 3, 21}, 0, 1},
-	{ {1280, 800, 79500, 32, 48, 80, 6, 3, 14}, 0, 1},
-	{ {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1}
+static const struct hdmi_config cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = {
+{ {640, 480, 25200, 96, 16, 48, 2, 10, 33, 0, 0, 0}, {1, HDMI_HDMI} },
+{ {720, 480, 27027, 62, 16, 60, 6, 9, 30, 0, 0, 0}, {2, HDMI_HDMI} },
+{ {1280, 720, 74250, 40, 110, 220, 5, 5, 20, 1, 1, 0}, {4, HDMI_HDMI} },
+{ {1920, 540, 74250, 44, 88, 148, 5, 2, 15, 1, 1, 1}, {5, HDMI_HDMI} },
+{ {1440, 240, 27027, 124, 38, 114, 3, 4, 15, 0, 0, 1}, {6, HDMI_HDMI} },
+{ {1920, 1080, 148500, 44, 88, 148, 5, 4, 36, 1, 1, 0}, {16, HDMI_HDMI} },
+{ {720, 576, 27000, 64, 12, 68, 5, 5, 39, 0, 0, 0}, {17, HDMI_HDMI} },
+{ {1280, 720, 74250, 40, 440, 220, 5, 5, 20, 1, 1, 0}, {19, HDMI_HDMI} },
+{ {1920, 540, 74250, 44, 528, 148, 5, 2, 15, 1, 1, 1}, {20, HDMI_HDMI} },
+{ {1440, 288, 27000, 126, 24, 138, 3, 2, 19, 0, 0, 1}, {21, HDMI_HDMI} },
+{ {1440, 576, 54000, 128, 24, 136, 5, 5, 39, 0, 0, 0}, {29, HDMI_HDMI} },
+{ {1920, 1080, 148500, 44, 528, 148, 5, 4, 36, 1, 1, 0}, {31, HDMI_HDMI} },
+{ {1920, 1080, 74250, 44, 638, 148, 5, 4, 36, 1, 1, 0}, {32, HDMI_HDMI} },
+{ {2880, 480, 108108, 248, 64, 240, 6, 9, 30, 0, 0, 0}, {35, HDMI_HDMI} },
+{ {2880, 576, 108000, 256, 48, 272, 5, 5, 39, 0, 0, 0}, {37, HDMI_HDMI} },
+/* VESA From Here */
+{ {640, 480, 25175, 96, 16, 48, 2 , 11, 31, 0, 0, 0}, {4, HDMI_DVI} },
+{ {800, 600, 40000, 128, 40, 88, 4 , 1, 23, 1, 1, 0}, {9, HDMI_DVI} },
+{ {848, 480, 33750, 112, 16, 112, 8 , 6, 23, 1, 1, 0}, {0xE, HDMI_DVI} },
+{ {1280, 768, 79500, 128, 64, 192, 7 , 3, 20, 1, 0, 0}, {0x17, HDMI_DVI} },
+{ {1280, 800, 83500, 128, 72, 200, 6 , 3, 22, 1, 0, 0}, {0x1C, HDMI_DVI} },
+{ {1360, 768, 85500, 112, 64, 256, 6 , 3, 18, 1, 1, 0}, {0x27, HDMI_DVI} },
+{ {1280, 960, 108000, 112, 96, 312, 3 , 1, 36, 1, 1, 0}, {0x20, HDMI_DVI} },
+{ {1280, 1024, 108000, 112, 48, 248, 3 , 1, 38, 1, 1, 0}, {0x23, HDMI_DVI} },
+{ {1024, 768, 65000, 136, 24, 160, 6, 3, 29, 0, 0, 0}, {0x10, HDMI_DVI} },
+{ {1400, 1050, 121750, 144, 88, 232, 4, 3, 32, 1, 0, 0}, {0x2A, HDMI_DVI} },
+{ {1440, 900, 106500, 152, 80, 232, 6, 3, 25, 1, 0, 0}, {0x2F, HDMI_DVI} },
+{ {1680, 1050, 146250, 176 , 104, 280, 6, 3, 30, 1, 0, 0}, {0x3A, HDMI_DVI} },
+{ {1366, 768, 85500, 143, 70, 213, 3, 3, 24, 1, 1, 0}, {0x51, HDMI_DVI} },
+{ {1920, 1080, 148500, 44, 148, 80, 5, 4, 36, 1, 1, 0}, {0x52, HDMI_DVI} },
+{ {1280, 768, 68250, 32, 48, 80, 7, 3, 12, 0, 1, 0}, {0x16, HDMI_DVI} },
+{ {1400, 1050, 101000, 32, 48, 80, 4, 3, 23, 0, 1, 0}, {0x29, HDMI_DVI} },
+{ {1680, 1050, 119000, 32, 48, 80, 6, 3, 21, 0, 1, 0}, {0x39, HDMI_DVI} },
+{ {1280, 800, 79500, 32, 48, 80, 6, 3, 14, 0, 1, 0}, {0x1B, HDMI_DVI} },
+{ {1280, 720, 74250, 40, 110, 220, 5, 5, 20, 1, 1, 0}, {0x55, HDMI_DVI} }
 };
 
 /*
@@ -253,23 +253,23 @@ static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
 static void update_hdmi_timings(struct hdmi_config *cfg,
 		struct omap_video_timings *timings, int code)
 {
-	cfg->timings.timings.x_res = timings->x_res;
-	cfg->timings.timings.y_res = timings->y_res;
-	cfg->timings.timings.hbp = timings->hbp;
-	cfg->timings.timings.hfp = timings->hfp;
-	cfg->timings.timings.hsw = timings->hsw;
-	cfg->timings.timings.vbp = timings->vbp;
-	cfg->timings.timings.vfp = timings->vfp;
-	cfg->timings.timings.vsw = timings->vsw;
-	cfg->timings.timings.pixel_clock = timings->pixel_clock;
-	cfg->timings.vsync_pol = cea_vesa_timings[code].vsync_pol;
-	cfg->timings.hsync_pol = cea_vesa_timings[code].hsync_pol;
+	cfg->timings.x_res = timings->x_res;
+	cfg->timings.y_res = timings->y_res;
+	cfg->timings.hbp = timings->hbp;
+	cfg->timings.hfp = timings->hfp;
+	cfg->timings.hsw = timings->hsw;
+	cfg->timings.vbp = timings->vbp;
+	cfg->timings.vfp = timings->vfp;
+	cfg->timings.vsw = timings->vsw;
+	cfg->timings.pixel_clock = timings->pixel_clock;
+	cfg->timings.vsync_pol = cea_vesa_timings[code].timings.vsync_pol;
+	cfg->timings.hsync_pol = cea_vesa_timings[code].timings.hsync_pol;
 }
 
 unsigned long hdmi_get_pixel_clock(void)
 {
 	/* HDMI Pixel Clock in Mhz */
-	return hdmi.ip_data.cfg.timings.timings.pixel_clock * 1000;
+	return hdmi.ip_data.cfg.timings.pixel_clock * 1000;
 }
 
 static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index 7503f7f619a..26ec6d1162f 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -42,6 +42,7 @@ enum hdmi_clk_refsel {
 	HDMI_REFSEL_SYSCLK = 3
 };
 
+/* HDMI timing structure */
 struct hdmi_video_timings {
 	u16 x_res;
 	u16 y_res;
@@ -53,13 +54,9 @@ struct hdmi_video_timings {
 	u16 vsw;
 	u16 vfp;
 	u16 vbp;
-};
-
-/* HDMI timing structure */
-struct hdmi_timings {
-	struct hdmi_video_timings timings;
-	int vsync_pol;
-	int hsync_pol;
+	bool vsync_pol;
+	bool hsync_pol;
+	bool interlace;
 };
 
 struct hdmi_cm {
@@ -68,8 +65,7 @@ struct hdmi_cm {
 };
 
 struct hdmi_config {
-	struct hdmi_timings timings;
-	u16	interlace;
+	struct hdmi_video_timings timings;
 	struct hdmi_cm cm;
 };
 
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index bafbd9fad4b..a229ae71be7 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -656,15 +656,15 @@ static void hdmi_wp_video_init_format(struct hdmi_video_format *video_fmt,
 {
 	pr_debug("Enter hdmi_wp_video_init_format\n");
 
-	video_fmt->y_res = param->timings.timings.y_res;
-	video_fmt->x_res = param->timings.timings.x_res;
-
-	timings->hbp = param->timings.timings.hbp;
-	timings->hfp = param->timings.timings.hfp;
-	timings->hsw = param->timings.timings.hsw;
-	timings->vbp = param->timings.timings.vbp;
-	timings->vfp = param->timings.timings.vfp;
-	timings->vsw = param->timings.timings.vsw;
+	video_fmt->y_res = param->timings.y_res;
+	video_fmt->x_res = param->timings.x_res;
+
+	timings->hbp = param->timings.hbp;
+	timings->hfp = param->timings.hfp;
+	timings->hsw = param->timings.hsw;
+	timings->vbp = param->timings.vbp;
+	timings->vfp = param->timings.vfp;
+	timings->vsw = param->timings.vsw;
 }
 
 static void hdmi_wp_video_config_format(struct hdmi_ip_data *ip_data,
@@ -688,7 +688,7 @@ static void hdmi_wp_video_config_interface(struct hdmi_ip_data *ip_data)
 	r = hdmi_read_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG);
 	r = FLD_MOD(r, ip_data->cfg.timings.vsync_pol, 7, 7);
 	r = FLD_MOD(r, ip_data->cfg.timings.hsync_pol, 6, 6);
-	r = FLD_MOD(r, ip_data->cfg.interlace, 3, 3);
+	r = FLD_MOD(r, ip_data->cfg.timings.interlace, 3, 3);
 	r = FLD_MOD(r, 1, 1, 0); /* HDMI_TIMING_MASTER_24BIT */
 	hdmi_write_reg(hdmi_wp_base(ip_data), HDMI_WP_VIDEO_CFG, r);
 }
-- 
cgit v1.2.3-70-g09d2


From 46095b2d96bac92c2cc5ca557ec7de73e13311ab Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Fri, 6 Jan 2012 17:52:09 +0530
Subject: OMAPDSS: HDMI: change the timing match logic

Change the timing match logic, Instead of the statically mapped method
to get the corresponding timings for a given code and mode, move to a
simpler array indexed method. It  will help to scale up to add more
timings when needed.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 176 ++++++++++++++++++-----------------------
 1 file changed, 76 insertions(+), 100 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 266af264eb9..6f027d30d5d 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -58,8 +58,6 @@
 #define EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR	4
 #define EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR	4
 
-#define OMAP_HDMI_TIMINGS_NB			34
-
 #define HDMI_DEFAULT_REGN 16
 #define HDMI_DEFAULT_REGM2 1
 
@@ -88,7 +86,7 @@ static struct {
  * map it to corresponding CEA or VESA index.
  */
 
-static const struct hdmi_config cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = {
+static const struct hdmi_config cea_timings[] = {
 { {640, 480, 25200, 96, 16, 48, 2, 10, 33, 0, 0, 0}, {1, HDMI_HDMI} },
 { {720, 480, 27027, 62, 16, 60, 6, 9, 30, 0, 0, 0}, {2, HDMI_HDMI} },
 { {1280, 720, 74250, 40, 110, 220, 5, 5, 20, 1, 1, 0}, {4, HDMI_HDMI} },
@@ -104,6 +102,8 @@ static const struct hdmi_config cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = {
 { {1920, 1080, 74250, 44, 638, 148, 5, 4, 36, 1, 1, 0}, {32, HDMI_HDMI} },
 { {2880, 480, 108108, 248, 64, 240, 6, 9, 30, 0, 0, 0}, {35, HDMI_HDMI} },
 { {2880, 576, 108000, 256, 48, 272, 5, 5, 39, 0, 0, 0}, {37, HDMI_HDMI} },
+};
+static const struct hdmi_config vesa_timings[] = {
 /* VESA From Here */
 { {640, 480, 25175, 96, 16, 48, 2 , 11, 31, 0, 0, 0}, {4, HDMI_DVI} },
 { {800, 600, 40000, 128, 40, 88, 4 , 1, 23, 1, 1, 0}, {9, HDMI_DVI} },
@@ -126,39 +126,6 @@ static const struct hdmi_config cea_vesa_timings[OMAP_HDMI_TIMINGS_NB] = {
 { {1280, 720, 74250, 40, 110, 220, 5, 5, 20, 1, 1, 0}, {0x55, HDMI_DVI} }
 };
 
-/*
- * This is a static mapping array which maps the timing values
- * with corresponding CEA / VESA code
- */
-static const int code_index[OMAP_HDMI_TIMINGS_NB] = {
-	1, 19, 4, 2, 37, 6, 21, 20, 5, 16, 17, 29, 31, 35, 32,
-	/* <--15 CEA 17--> vesa*/
-	4, 9, 0xE, 0x17, 0x1C, 0x27, 0x20, 0x23, 0x10, 0x2A,
-	0X2F, 0x3A, 0X51, 0X52, 0x16, 0x29, 0x39, 0x1B
-};
-
-/*
- * This is reverse static mapping which maps the CEA / VESA code
- * to the corresponding timing values
- */
-static const int code_cea[39] = {
-	-1,  0,  3,  3,  2,  8,  5,  5, -1, -1,
-	-1, -1, -1, -1, -1, -1,  9, 10, 10,  1,
-	7,   6,  6, -1, -1, -1, -1, -1, -1, 11,
-	11, 12, 14, -1, -1, 13, 13,  4,  4
-};
-
-static const int code_vesa[85] = {
-	-1, -1, -1, -1, 15, -1, -1, -1, -1, 16,
-	-1, -1, -1, -1, 17, -1, 23, -1, -1, -1,
-	-1, -1, 29, 18, -1, -1, -1, 32, 19, -1,
-	-1, -1, 21, -1, -1, 22, -1, -1, -1, 20,
-	-1, 30, 24, -1, -1, -1, -1, 25, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, 31, 26, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-	-1, 27, 28, -1, 33};
-
 static int hdmi_runtime_get(void)
 {
 	int r;
@@ -188,82 +155,83 @@ int hdmi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static int get_timings_index(void)
+static const struct hdmi_config *hdmi_find_timing(
+					const struct hdmi_config *timings_arr,
+					int len)
 {
-	int code;
+	int i;
 
-	if (hdmi.mode == 0)
-		code = code_vesa[hdmi.code];
-	else
-		code = code_cea[hdmi.code];
+	for (i = 0; i < len; i++) {
+		if (timings_arr[i].cm.code == hdmi.code)
+			return &timings_arr[i];
+	}
+	return NULL;
+}
 
-	if (code == -1)	{
-		/* HDMI code 4 corresponds to 640 * 480 VGA */
-		hdmi.code = 4;
-		/* DVI mode 1 corresponds to HDMI 0 to DVI */
-		hdmi.mode = HDMI_DVI;
+static const struct hdmi_config *hdmi_get_timings(void)
+{
+       const struct hdmi_config *arr;
+       int len;
+
+       if (hdmi.mode == HDMI_DVI) {
+               arr = vesa_timings;
+               len = ARRAY_SIZE(vesa_timings);
+       } else {
+               arr = cea_timings;
+               len = ARRAY_SIZE(cea_timings);
+       }
+
+       return hdmi_find_timing(arr, len);
+}
+
+static bool hdmi_timings_compare(struct omap_video_timings *timing1,
+				const struct hdmi_video_timings *timing2)
+{
+	int timing1_vsync, timing1_hsync, timing2_vsync, timing2_hsync;
+
+	if ((timing2->pixel_clock == timing1->pixel_clock) &&
+		(timing2->x_res == timing1->x_res) &&
+		(timing2->y_res == timing1->y_res)) {
+
+		timing2_hsync = timing2->hfp + timing2->hsw + timing2->hbp;
+		timing1_hsync = timing1->hfp + timing1->hsw + timing1->hbp;
+		timing2_vsync = timing2->vfp + timing2->vsw + timing2->vbp;
+		timing1_vsync = timing2->vfp + timing2->vsw + timing2->vbp;
 
-		code = code_vesa[hdmi.code];
+		DSSDBG("timing1_hsync = %d timing1_vsync = %d"\
+			"timing2_hsync = %d timing2_vsync = %d\n",
+			timing1_hsync, timing1_vsync,
+			timing2_hsync, timing2_vsync);
+
+		if ((timing1_hsync == timing2_hsync) &&
+			(timing1_vsync == timing2_vsync)) {
+			return true;
+		}
 	}
-	return code;
+	return false;
 }
 
 static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
 {
-	int i = 0, code = -1, temp_vsync = 0, temp_hsync = 0;
-	int timing_vsync = 0, timing_hsync = 0;
-	struct hdmi_video_timings temp;
+	int i;
 	struct hdmi_cm cm = {-1};
 	DSSDBG("hdmi_get_code\n");
 
-	for (i = 0; i < OMAP_HDMI_TIMINGS_NB; i++) {
-		temp = cea_vesa_timings[i].timings;
-		if ((temp.pixel_clock == timing->pixel_clock) &&
-			(temp.x_res == timing->x_res) &&
-			(temp.y_res == timing->y_res)) {
-
-			temp_hsync = temp.hfp + temp.hsw + temp.hbp;
-			timing_hsync = timing->hfp + timing->hsw + timing->hbp;
-			temp_vsync = temp.vfp + temp.vsw + temp.vbp;
-			timing_vsync = timing->vfp + timing->vsw + timing->vbp;
-
-			DSSDBG("temp_hsync = %d , temp_vsync = %d"
-				"timing_hsync = %d, timing_vsync = %d\n",
-				temp_hsync, temp_hsync,
-				timing_hsync, timing_vsync);
-
-			if ((temp_hsync == timing_hsync) &&
-					(temp_vsync == timing_vsync)) {
-				code = i;
-				cm.code = code_index[i];
-				if (code < 14)
-					cm.mode = HDMI_HDMI;
-				else
-					cm.mode = HDMI_DVI;
-				DSSDBG("Hdmi_code = %d mode = %d\n",
-					 cm.code, cm.mode);
-				break;
-			 }
+	for (i = 0; i < ARRAY_SIZE(cea_timings); i++) {
+		if (hdmi_timings_compare(timing, &cea_timings[i].timings)) {
+			cm = cea_timings[i].cm;
+			goto end;
+		}
+	}
+	for (i = 0; i < ARRAY_SIZE(vesa_timings); i++) {
+		if (hdmi_timings_compare(timing, &vesa_timings[i].timings)) {
+			cm = vesa_timings[i].cm;
+			goto end;
 		}
 	}
 
-	return cm;
-}
+end:	return cm;
 
-static void update_hdmi_timings(struct hdmi_config *cfg,
-		struct omap_video_timings *timings, int code)
-{
-	cfg->timings.x_res = timings->x_res;
-	cfg->timings.y_res = timings->y_res;
-	cfg->timings.hbp = timings->hbp;
-	cfg->timings.hfp = timings->hfp;
-	cfg->timings.hsw = timings->hsw;
-	cfg->timings.vbp = timings->vbp;
-	cfg->timings.vfp = timings->vfp;
-	cfg->timings.vsw = timings->vsw;
-	cfg->timings.pixel_clock = timings->pixel_clock;
-	cfg->timings.vsync_pol = cea_vesa_timings[code].timings.vsync_pol;
-	cfg->timings.hsync_pol = cea_vesa_timings[code].timings.hsync_pol;
 }
 
 unsigned long hdmi_get_pixel_clock(void)
@@ -325,7 +293,8 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
 
 static int hdmi_power_on(struct omap_dss_device *dssdev)
 {
-	int r, code = 0;
+	int r;
+	const struct hdmi_config *timing;
 	struct omap_video_timings *p;
 	unsigned long phy;
 
@@ -341,9 +310,16 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 		dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 
-	code = get_timings_index();
-	update_hdmi_timings(&hdmi.ip_data.cfg, p, code);
-
+	timing = hdmi_get_timings();
+	if (timing == NULL) {
+		/* HDMI code 4 corresponds to 640 * 480 VGA */
+		hdmi.code = 4;
+		/* DVI mode 1 corresponds to HDMI 0 to DVI */
+		hdmi.mode = HDMI_DVI;
+		hdmi.ip_data.cfg = vesa_timings[0];
+	} else {
+		hdmi.ip_data.cfg = *timing;
+	}
 	phy = p->pixel_clock;
 
 	hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
-- 
cgit v1.2.3-70-g09d2


From 9e4ed603e6ec71da9e0a7484a694f98dff869068 Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Fri, 6 Jan 2012 17:52:10 +0530
Subject: OMAPDSS: HDMI: remove duplicate code and mode parameter

code and mode parameters are already a part of the ip_data structure
so no need to keep the same parameters again in hdmi global structure.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 6f027d30d5d..92a66798f67 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -66,8 +66,6 @@ static struct {
 	struct omap_display_platform_data *pdata;
 	struct platform_device *pdev;
 	struct hdmi_ip_data ip_data;
-	int code;
-	int mode;
 
 	struct clk *sys_clk;
 } hdmi;
@@ -162,7 +160,7 @@ static const struct hdmi_config *hdmi_find_timing(
 	int i;
 
 	for (i = 0; i < len; i++) {
-		if (timings_arr[i].cm.code == hdmi.code)
+		if (timings_arr[i].cm.code == hdmi.ip_data.cfg.cm.code)
 			return &timings_arr[i];
 	}
 	return NULL;
@@ -173,7 +171,7 @@ static const struct hdmi_config *hdmi_get_timings(void)
        const struct hdmi_config *arr;
        int len;
 
-       if (hdmi.mode == HDMI_DVI) {
+       if (hdmi.ip_data.cfg.cm.mode == HDMI_DVI) {
                arr = vesa_timings;
                len = ARRAY_SIZE(vesa_timings);
        } else {
@@ -313,9 +311,9 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	timing = hdmi_get_timings();
 	if (timing == NULL) {
 		/* HDMI code 4 corresponds to 640 * 480 VGA */
-		hdmi.code = 4;
+		hdmi.ip_data.cfg.cm.code = 4;
 		/* DVI mode 1 corresponds to HDMI 0 to DVI */
-		hdmi.mode = HDMI_DVI;
+		hdmi.ip_data.cfg.cm.mode = HDMI_DVI;
 		hdmi.ip_data.cfg = vesa_timings[0];
 	} else {
 		hdmi.ip_data.cfg = *timing;
@@ -339,8 +337,6 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
-	hdmi.ip_data.cfg.cm.mode = hdmi.mode;
-	hdmi.ip_data.cfg.cm.code = hdmi.code;
 	hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
 
 	/* Make selection of HDMI in DSS */
@@ -407,8 +403,8 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
 	struct hdmi_cm cm;
 
 	cm = hdmi_get_code(&dssdev->panel.timings);
-	hdmi.code = cm.code;
-	hdmi.mode = cm.mode;
+	hdmi.ip_data.cfg.cm.code = cm.code;
+	hdmi.ip_data.cfg.cm.mode = cm.mode;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		int r;
@@ -707,7 +703,7 @@ static int hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 static int hdmi_audio_startup(struct snd_pcm_substream *substream,
 				  struct snd_soc_dai *dai)
 {
-	if (!hdmi.mode) {
+	if (!hdmi.ip_data.cfg.cm.mode) {
 		pr_err("Current video settings do not support audio.\n");
 		return -EIO;
 	}
-- 
cgit v1.2.3-70-g09d2


From 1149c74419179d57fdcd506424da2444755e65d9 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 19 Jan 2012 12:21:41 -0600
Subject: OMAPDSS: HDMI: Correct source of the pixel clock in ACR calculation

Due to changes in struct hdmi_config, the pixel clock has to be obtained
differently.

The pixel clock is needed to calculate the CTS value as defined in the
HDMI specification.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index a229ae71be7..9bbf9614fe0 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1137,7 +1137,7 @@ int hdmi_config_audio_acr(struct hdmi_ip_data *ip_data,
 {
 	u32 r;
 	u32 deep_color = 0;
-	u32 pclk = ip_data->cfg.timings.timings.pixel_clock;
+	u32 pclk = ip_data->cfg.timings.pixel_clock;
 
 	if (n == NULL || cts == NULL)
 		return -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From cc1d3e032df53d83d0ca4d537d8eb67eb5b3e808 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Tue, 24 Jan 2012 16:44:42 +0100
Subject: OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug
 attr on OMAP4

Commit ba02fa37de80bea10d706f39f076dd848348320a disabled the
venc driver registration on OMAP4. Since the driver never gets
probed/initialised your get a dereferenceed NULL pointer if you
try to get info from /sys/kernel/debug/omapdss/venc

Return info message about disabled venc if venc_dump_regs() gets called.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/venc.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index b3e9f909158..82865bec945 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -699,6 +699,11 @@ void venc_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
 
+	if (cpu_is_omap44xx()) {
+		seq_printf(s, "VENC currently disabled on OMAP44xx\n");
+		return;
+	}
+
 	if (venc_runtime_get())
 		return;
 
-- 
cgit v1.2.3-70-g09d2


From 6e2a14d2c59f6208310eeb6b031e9d1c22b38c6a Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Tue, 24 Jan 2012 14:00:45 +0100
Subject: OMAPDSS: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 16 ++++++----------
 drivers/video/omap2/dss/dsi.c   | 28 +++++++++-------------------
 drivers/video/omap2/dss/dss.c   |  9 +++------
 drivers/video/omap2/dss/rfbi.c  |  5 ++---
 drivers/video/omap2/dss/venc.c  |  8 +++-----
 5 files changed, 23 insertions(+), 43 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index a5ec7f37c18..6fa866a83f1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3322,7 +3322,8 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 		r = -EINVAL;
 		goto err_ioremap;
 	}
-	dispc.base = ioremap(dispc_mem->start, resource_size(dispc_mem));
+	dispc.base = devm_ioremap(&pdev->dev, dispc_mem->start,
+				  resource_size(dispc_mem));
 	if (!dispc.base) {
 		DSSERR("can't ioremap DISPC\n");
 		r = -ENOMEM;
@@ -3332,14 +3333,14 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 	if (dispc.irq < 0) {
 		DSSERR("platform_get_irq failed\n");
 		r = -ENODEV;
-		goto err_irq;
+		goto err_ioremap;
 	}
 
-	r = request_irq(dispc.irq, omap_dispc_irq_handler, IRQF_SHARED,
-		"OMAP DISPC", dispc.pdev);
+	r = devm_request_irq(&pdev->dev, dispc.irq, omap_dispc_irq_handler,
+			     IRQF_SHARED, "OMAP DISPC", dispc.pdev);
 	if (r < 0) {
 		DSSERR("request_irq failed\n");
-		goto err_irq;
+		goto err_ioremap;
 	}
 
 	pm_runtime_enable(&pdev->dev);
@@ -3362,9 +3363,6 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
-	free_irq(dispc.irq, dispc.pdev);
-err_irq:
-	iounmap(dispc.base);
 err_ioremap:
 	clk_put(dispc.dss_clk);
 err_get_clk:
@@ -3377,8 +3375,6 @@ static int omap_dispchw_remove(struct platform_device *pdev)
 
 	clk_put(dispc.dss_clk);
 
-	free_irq(dispc.irq, dispc.pdev);
-	iounmap(dispc.base);
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d4d676c82c1..52b93597730 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4695,7 +4695,7 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	struct resource *dsi_mem;
 	struct dsi_data *dsi;
 
-	dsi = kzalloc(sizeof(*dsi), GFP_KERNEL);
+	dsi = devm_kzalloc(&dsidev->dev, sizeof(*dsi), GFP_KERNEL);
 	if (!dsi) {
 		r = -ENOMEM;
 		goto err_alloc;
@@ -4724,7 +4724,7 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	r = dsi_get_clocks(dsidev);
 	if (r)
-		goto err_get_clk;
+		goto err_alloc;
 
 	pm_runtime_enable(&dsidev->dev);
 
@@ -4742,7 +4742,8 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 		r = -EINVAL;
 		goto err_ioremap;
 	}
-	dsi->base = ioremap(dsi_mem->start, resource_size(dsi_mem));
+	dsi->base = devm_ioremap(&dsidev->dev, dsi_mem->start,
+				 resource_size(dsi_mem));
 	if (!dsi->base) {
 		DSSERR("can't ioremap DSI\n");
 		r = -ENOMEM;
@@ -4752,14 +4753,14 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	if (dsi->irq < 0) {
 		DSSERR("platform_get_irq failed\n");
 		r = -ENODEV;
-		goto err_get_irq;
+		goto err_ioremap;
 	}
 
-	r = request_irq(dsi->irq, omap_dsi_irq_handler, IRQF_SHARED,
-		dev_name(&dsidev->dev), dsi->pdev);
+	r = devm_request_irq(&dsidev->dev, dsi->irq, omap_dsi_irq_handler,
+			     IRQF_SHARED, dev_name(&dsidev->dev), dsi->pdev);
 	if (r < 0) {
 		DSSERR("request_irq failed\n");
-		goto err_get_irq;
+		goto err_ioremap;
 	}
 
 	/* DSI VCs initialization */
@@ -4773,7 +4774,7 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	r = dsi_runtime_get(dsidev);
 	if (r)
-		goto err_get_dsi;
+		goto err_ioremap;
 
 	rev = dsi_read_reg(dsidev, DSI_REVISION);
 	dev_dbg(&dsidev->dev, "OMAP DSI rev %d.%d\n",
@@ -4791,14 +4792,8 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	return 0;
 
-err_get_dsi:
-	free_irq(dsi->irq, dsi->pdev);
-err_get_irq:
-	iounmap(dsi->base);
 err_ioremap:
 	pm_runtime_disable(&dsidev->dev);
-err_get_clk:
-	kfree(dsi);
 err_alloc:
 	return r;
 }
@@ -4823,11 +4818,6 @@ static int omap_dsihw_remove(struct platform_device *dsidev)
 		dsi->vdds_dsi_reg = NULL;
 	}
 
-	free_irq(dsi->irq, dsi->pdev);
-	iounmap(dsi->base);
-
-	kfree(dsi);
-
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 17033457ee8..e75f837c766 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -751,7 +751,8 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 		r = -EINVAL;
 		goto err_ioremap;
 	}
-	dss.base = ioremap(dss_mem->start, resource_size(dss_mem));
+	dss.base = devm_ioremap(&pdev->dev, dss_mem->start,
+				resource_size(dss_mem));
 	if (!dss.base) {
 		DSSERR("can't ioremap DSS\n");
 		r = -ENOMEM;
@@ -760,7 +761,7 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 
 	r = dss_get_clocks();
 	if (r)
-		goto err_clocks;
+		goto err_ioremap;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -808,8 +809,6 @@ err_dpi:
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	dss_put_clocks();
-err_clocks:
-	iounmap(dss.base);
 err_ioremap:
 	return r;
 }
@@ -819,8 +818,6 @@ static int omap_dsshw_remove(struct platform_device *pdev)
 	dpi_exit();
 	sdi_exit();
 
-	iounmap(dss.base);
-
 	pm_runtime_disable(&pdev->dev);
 
 	dss_put_clocks();
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 814bb9500dc..159e914063c 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -925,7 +925,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
 		r = -EINVAL;
 		goto err_ioremap;
 	}
-	rfbi.base = ioremap(rfbi_mem->start, resource_size(rfbi_mem));
+	rfbi.base = devm_ioremap(&pdev->dev, rfbi_mem->start,
+				 resource_size(rfbi_mem));
 	if (!rfbi.base) {
 		DSSERR("can't ioremap RFBI\n");
 		r = -ENOMEM;
@@ -963,7 +964,6 @@ err_get_ick:
 	rfbi_runtime_put();
 err_get_rfbi:
 	pm_runtime_disable(&pdev->dev);
-	iounmap(rfbi.base);
 err_ioremap:
 	return r;
 }
@@ -971,7 +971,6 @@ err_ioremap:
 static int omap_rfbihw_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
-	iounmap(rfbi.base);
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 82865bec945..4172232cdec 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -798,7 +798,8 @@ static int omap_venchw_probe(struct platform_device *pdev)
 		r = -EINVAL;
 		goto err_ioremap;
 	}
-	venc.base = ioremap(venc_mem->start, resource_size(venc_mem));
+	venc.base = devm_ioremap(&pdev->dev, venc_mem->start,
+				 resource_size(venc_mem));
 	if (!venc.base) {
 		DSSERR("can't ioremap VENC\n");
 		r = -ENOMEM;
@@ -807,7 +808,7 @@ static int omap_venchw_probe(struct platform_device *pdev)
 
 	r = venc_get_clocks(pdev);
 	if (r)
-		goto err_get_clk;
+		goto err_ioremap;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -825,8 +826,6 @@ static int omap_venchw_probe(struct platform_device *pdev)
 err_get_venc:
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
-err_get_clk:
-	iounmap(venc.base);
 err_ioremap:
 	return r;
 }
@@ -842,7 +841,6 @@ static int omap_venchw_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
 
-	iounmap(venc.base);
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 787f9fd23283d7103c65371f7b108ecf1020cddf Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Thu, 13 Oct 2011 16:52:50 +0200
Subject: atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit
 modes

Allow framebuffer to be configured in 16bit mode when panel is wired in
(the default) BGR configuration, and don't claim to support 15bit input
modes, which the LCD controller cannot handle.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/atmel_lcdfb.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index e40c00f2c2b..d99505b1637 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -421,24 +421,18 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 		var->red.length = var->green.length = var->blue.length
 			= var->bits_per_pixel;
 		break;
-	case 15:
 	case 16:
 		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 			/* RGB:565 mode */
 			var->red.offset = 11;
 			var->blue.offset = 0;
-			var->green.length = 6;
-		} else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) {
-			var->red.offset = 10;
-			var->blue.offset = 0;
-			var->green.length = 5;
 		} else {
-			/* BGR:555 mode */
+			/* BGR:565 mode */
 			var->red.offset = 0;
-			var->blue.offset = 10;
-			var->green.length = 5;
+			var->blue.offset = 11;
 		}
 		var->green.offset = 5;
+		var->green.length = 6;
 		var->red.length = var->blue.length = 5;
 		break;
 	case 32:
-- 
cgit v1.2.3-70-g09d2


From f820917abae4a019b0357d3fe72b22c22a11b775 Mon Sep 17 00:00:00 2001
From: "Manjunathappa, Prakash" <prakash.pm@ti.com>
Date: Tue, 3 Jan 2012 18:10:51 +0530
Subject: video: da8xx-fb: reset LCDC only if functional clock changes with
 DVFS

LCDC functional clock may or may not be derived from CPU/MPU DPLL,
For example,
AM335x => Separate independent DPLL for LCDC
Davinci => Same DPLL as MPU

So, on platforms where LCDC functional clock is not derived from CPU/MPU
PLL it is not required to reset LCDC module as its functional clock does
not change with DVFS.

This patch adds check to do reset only if functional clock changes
between pre and post notifier callbacks with DVFS.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/da8xx-fb.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 29577bf1f55..9ecc30744c6 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -161,6 +161,7 @@ struct da8xx_fb_par {
 	int			vsync_timeout;
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
+	unsigned int		lcd_fck_rate;
 #endif
 	void (*panel_power_ctrl)(int);
 };
@@ -840,11 +841,13 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
 	struct da8xx_fb_par *par;
 
 	par = container_of(nb, struct da8xx_fb_par, freq_transition);
-	if (val == CPUFREQ_PRECHANGE) {
-		lcd_disable_raster();
-	} else if (val == CPUFREQ_POSTCHANGE) {
-		lcd_calc_clk_divider(par);
-		lcd_enable_raster();
+	if (val == CPUFREQ_POSTCHANGE) {
+		if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
+			par->lcd_fck_rate = clk_get_rate(par->lcdc_clk);
+			lcd_disable_raster();
+			lcd_calc_clk_divider(par);
+			lcd_enable_raster();
+		}
 	}
 
 	return 0;
@@ -1137,6 +1140,9 @@ static int __devinit fb_probe(struct platform_device *device)
 
 	par = da8xx_fb_info->par;
 	par->lcdc_clk = fb_clk;
+#ifdef CONFIG_CPU_FREQ
+	par->lcd_fck_rate = clk_get_rate(fb_clk);
+#endif
 	par->pxl_clk = lcdc_info->pxl_clk;
 	if (fb_pdata->panel_power_ctrl) {
 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
-- 
cgit v1.2.3-70-g09d2


From 857a8df9467a6dfe5d3aa309d9bdef31dc817647 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sat, 21 Jan 2012 13:11:49 +0000
Subject: video: s3c-fb: Convert to devm style allocation

Saves some code, especially useful as the code saved is mostly in the
infrequently tested error paths.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/s3c-fb.c | 32 +++++---------------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 0c63b69b634..7c5158dda0b 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -186,7 +186,6 @@ struct s3c_fb_vsync {
  * struct s3c_fb - overall hardware state of the hardware
  * @slock: The spinlock protection for this data sturcture.
  * @dev: The device that we bound to, for printing, etc.
- * @regs_res: The resource we claimed for the IO registers.
  * @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
  * @lcd_clk: The clk (sclk) feeding pixclk.
  * @regs: The mapped hardware registers.
@@ -202,7 +201,6 @@ struct s3c_fb_vsync {
 struct s3c_fb {
 	spinlock_t		slock;
 	struct device		*dev;
-	struct resource		*regs_res;
 	struct clk		*bus_clk;
 	struct clk		*lcd_clk;
 	void __iomem		*regs;
@@ -1361,7 +1359,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	sfb = kzalloc(sizeof(struct s3c_fb), GFP_KERNEL);
+	sfb = devm_kzalloc(dev, sizeof(struct s3c_fb), GFP_KERNEL);
 	if (!sfb) {
 		dev_err(dev, "no memory for framebuffers\n");
 		return -ENOMEM;
@@ -1404,33 +1402,25 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 		goto err_lcd_clk;
 	}
 
-	sfb->regs_res = request_mem_region(res->start, resource_size(res),
-					   dev_name(dev));
-	if (!sfb->regs_res) {
-		dev_err(dev, "failed to claim register region\n");
-		ret = -ENOENT;
-		goto err_lcd_clk;
-	}
-
-	sfb->regs = ioremap(res->start, resource_size(res));
+	sfb->regs = devm_request_and_ioremap(dev, res);
 	if (!sfb->regs) {
 		dev_err(dev, "failed to map registers\n");
 		ret = -ENXIO;
-		goto err_req_region;
+		goto err_lcd_clk;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
 		dev_err(dev, "failed to acquire irq resource\n");
 		ret = -ENOENT;
-		goto err_ioremap;
+		goto err_lcd_clk;
 	}
 	sfb->irq_no = res->start;
 	ret = request_irq(sfb->irq_no, s3c_fb_irq,
 			  0, "s3c_fb", sfb);
 	if (ret) {
 		dev_err(dev, "irq request failed\n");
-		goto err_ioremap;
+		goto err_lcd_clk;
 	}
 
 	dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
@@ -1486,12 +1476,6 @@ err_pm_runtime:
 	pm_runtime_put_sync(sfb->dev);
 	free_irq(sfb->irq_no, sfb);
 
-err_ioremap:
-	iounmap(sfb->regs);
-
-err_req_region:
-	release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
-
 err_lcd_clk:
 	pm_runtime_disable(sfb->dev);
 
@@ -1505,7 +1489,6 @@ err_bus_clk:
 	clk_put(sfb->bus_clk);
 
 err_sfb:
-	kfree(sfb);
 	return ret;
 }
 
@@ -1529,8 +1512,6 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 
 	free_irq(sfb->irq_no, sfb);
 
-	iounmap(sfb->regs);
-
 	if (!sfb->variant.has_clksel) {
 		clk_disable(sfb->lcd_clk);
 		clk_put(sfb->lcd_clk);
@@ -1539,12 +1520,9 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 	clk_disable(sfb->bus_clk);
 	clk_put(sfb->bus_clk);
 
-	release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
-
 	pm_runtime_put_sync(sfb->dev);
 	pm_runtime_disable(sfb->dev);
 
-	kfree(sfb);
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From 92a9c19a89af2ca219fbb040a0059f414a4b7223 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat, 28 Jan 2012 19:57:46 +0000
Subject: udlfb: remove sysfs framebuffer device with USB .disconnect()

The USB graphics card driver delays the unregistering of the framebuffer
device to a workqueue, which breaks the userspace visible remove uevent
sequence. Recent userspace tools started to support USB graphics card
hotplug out-of-the-box and rely on proper events sent by the kernel.

The framebuffer device is a direct child of the USB interface which is
removed immediately after the USB .disconnect() callback. But the fb device
in /sys stays around until its final cleanup, at a time where all the parent
devices have been removed already.

To work around that, we remove the sysfs fb device directly in the USB
.disconnect() callback and leave only the cleanup of the internal fb
data to the delayed work.

Before:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 remove   /2-1.2:1.0/graphics/fb0 (graphics)

After:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)

Cc: stable@vger.kernel.org
Tested-by: Bernie Thompson <bernie@plugable.com>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/fbmem.c | 18 +++++++++++++++++-
 drivers/video/udlfb.c |  2 +-
 include/linux/fb.h    |  1 +
 3 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index ac9141b8535..c6ce416ab58 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1665,6 +1665,7 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	if (ret)
 		return -EINVAL;
 
+	unlink_framebuffer(fb_info);
 	if (fb_info->pixmap.addr &&
 	    (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
 		kfree(fb_info->pixmap.addr);
@@ -1672,7 +1673,6 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	registered_fb[i] = NULL;
 	num_registered_fb--;
 	fb_cleanup_device(fb_info);
-	device_destroy(fb_class, MKDEV(FB_MAJOR, i));
 	event.info = fb_info;
 	fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
 
@@ -1681,6 +1681,22 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	return 0;
 }
 
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+	int i;
+
+	i = fb_info->node;
+	if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
+		return -EINVAL;
+
+	if (fb_info->dev) {
+		device_destroy(fb_class, MKDEV(FB_MAJOR, i));
+		fb_info->dev = NULL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(unlink_framebuffer);
+
 void remove_conflicting_framebuffers(struct apertures_struct *a,
 				     const char *name, bool primary)
 {
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index a19773149bd..a40c05ebbdc 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1739,7 +1739,7 @@ static void dlfb_usb_disconnect(struct usb_interface *interface)
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
 		device_remove_file(info->dev, &fb_device_attrs[i]);
 	device_remove_bin_file(info->dev, &edid_attr);
-
+	unlink_framebuffer(info);
 	usb_set_intfdata(interface, NULL);
 
 	/* if clients still have us open, will be freed on last close */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c18122f4054..a395b8c7699 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1003,6 +1003,7 @@ extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
 /* drivers/video/fbmem.c */
 extern int register_framebuffer(struct fb_info *fb_info);
 extern int unregister_framebuffer(struct fb_info *fb_info);
+extern int unlink_framebuffer(struct fb_info *fb_info);
 extern void remove_conflicting_framebuffers(struct apertures_struct *a,
 				const char *name, bool primary);
 extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
-- 
cgit v1.2.3-70-g09d2


From 1c16697bf9d5b206cb0d2b905a54de5e077296be Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia.lawall@lip6.fr>
Date: Sat, 21 Jan 2012 16:01:58 +0100
Subject: drivers/video/au*fb.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

In au1100fb.c, the probe function now returns -ENODEV on failure.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/au1100fb.c | 32 ++++++++++++--------------------
 drivers/video/au1200fb.c |  9 +--------
 2 files changed, 13 insertions(+), 28 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index de9da6774fd..befcbd8ef01 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -477,7 +477,8 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	u32 sys_clksrc;
 
 	/* Allocate new device private */
-	fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL);
+	fbdev = devm_kzalloc(&dev->dev, sizeof(struct au1100fb_device),
+			     GFP_KERNEL);
 	if (!fbdev) {
 		print_err("fail to allocate device private record");
 		return -ENOMEM;
@@ -498,8 +499,9 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	au1100fb_fix.mmio_start = regs_res->start;
 	au1100fb_fix.mmio_len = resource_size(regs_res);
 
-	if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
-				DRIVER_NAME)) {
+	if (!devm_request_mem_region(au1100fb_fix.mmio_start,
+				     au1100fb_fix.mmio_len,
+				     DRIVER_NAME)) {
 		print_err("fail to lock memory region at 0x%08lx",
 				au1100fb_fix.mmio_start);
 		return -EBUSY;
@@ -514,8 +516,9 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
 		  	(fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
 
-	fbdev->fb_mem = dma_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
-					&fbdev->fb_phys, GFP_KERNEL);
+	fbdev->fb_mem = dmam_alloc_coherent(&dev->dev, &dev->dev,
+					    PAGE_ALIGN(fbdev->fb_len),
+					    &fbdev->fb_phys, GFP_KERNEL);
 	if (!fbdev->fb_mem) {
 		print_err("fail to allocate frambuffer (size: %dK))",
 			  fbdev->fb_len / 1024);
@@ -557,14 +560,14 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	fbdev->info.fbops = &au1100fb_ops;
 	fbdev->info.fix = au1100fb_fix;
 
-	if (!(fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL))) {
+	fbdev->info.pseudo_palette =
+		devm_kzalloc(&dev->dev, sizeof(u32) * 16, GFP_KERNEL);
+	if (!fbdev->info.pseudo_palette)
 		return -ENOMEM;
-	}
 
 	if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
 		print_err("Fail to allocate colormap (%d entries)",
 			   AU1100_LCD_NBR_PALETTE_ENTRIES);
-		kfree(fbdev->info.pseudo_palette);
 		return -EFAULT;
 	}
 
@@ -582,9 +585,6 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev)
 	return 0;
 
 failed:
-	if (fbdev->regs) {
-		release_mem_region(fbdev->regs_phys, fbdev->regs_len);
-	}
 	if (fbdev->fb_mem) {
 		dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem,
 				     fbdev->fb_phys);
@@ -592,10 +592,9 @@ failed:
 	if (fbdev->info.cmap.len != 0) {
 		fb_dealloc_cmap(&fbdev->info.cmap);
 	}
-	kfree(fbdev);
 	platform_set_drvdata(dev, NULL);
 
-	return 0;
+	return -ENODEV;
 }
 
 int au1100fb_drv_remove(struct platform_device *dev)
@@ -615,14 +614,7 @@ int au1100fb_drv_remove(struct platform_device *dev)
 	/* Clean up all probe data */
 	unregister_framebuffer(&fbdev->info);
 
-	release_mem_region(fbdev->regs_phys, fbdev->regs_len);
-
-	dma_free_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem,
-			  fbdev->fb_phys);
-
 	fb_dealloc_cmap(&fbdev->info.cmap);
-	kfree(fbdev->info.pseudo_palette);
-	kfree((void*)fbdev);
 
 	return 0;
 }
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 04e4479d5af..3e9a773db09 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1724,7 +1724,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 		/* Allocate the framebuffer to the maximum screen size */
 		fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
 
-		fbdev->fb_mem = dma_alloc_noncoherent(&dev->dev,
+		fbdev->fb_mem = dmam_alloc_noncoherent(&dev->dev, &dev->dev,
 				PAGE_ALIGN(fbdev->fb_len),
 				&fbdev->fb_phys, GFP_KERNEL);
 		if (!fbdev->fb_mem) {
@@ -1788,9 +1788,6 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev)
 
 failed:
 	/* NOTE: This only does the current plane/window that failed; others are still active */
-	if (fbdev->fb_mem)
-		dma_free_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len),
-				fbdev->fb_mem, fbdev->fb_phys);
 	if (fbi) {
 		if (fbi->cmap.len != 0)
 			fb_dealloc_cmap(&fbi->cmap);
@@ -1817,10 +1814,6 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev)
 
 		/* Clean up all probe data */
 		unregister_framebuffer(fbi);
-		if (fbdev->fb_mem)
-			dma_free_noncoherent(&dev->dev,
-					PAGE_ALIGN(fbdev->fb_len),
-					fbdev->fb_mem, fbdev->fb_phys);
 		if (fbi->cmap.len != 0)
 			fb_dealloc_cmap(&fbi->cmap);
 		kfree(fbi->pseudo_palette);
-- 
cgit v1.2.3-70-g09d2


From f8bd493456c3da372ae81ed8f6b903f6207b9d98 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Thu, 26 Jan 2012 19:32:34 +0900
Subject: video: use gpio_request_one

Using gpio_request_one can make the code simpler because it can
set the direction and initial value in one shot.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/bf537-lq035.c                         | 12 +++---------
 drivers/video/bf54x-lq043fb.c                       |  4 +---
 drivers/video/bfin-lq035q1-fb.c                     |  8 ++++----
 drivers/video/bfin_adv7393fb.c                      |  5 +++--
 drivers/video/msm/mddi_client_nt35399.c             |  7 +------
 drivers/video/msm/mddi_client_toshiba.c             |  7 +------
 drivers/video/omap/lcd_inn1610.c                    | 10 ++++------
 drivers/video/omap2/displays/panel-taal.c           |  4 +---
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 11 ++---------
 9 files changed, 20 insertions(+), 48 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c
index bea53c1a495..befbc80d11f 100644
--- a/drivers/video/bf537-lq035.c
+++ b/drivers/video/bf537-lq035.c
@@ -383,23 +383,19 @@ static int __devinit request_ports(void)
 	}
 
 #if (defined(UD) && defined(LBR))
-	if (gpio_request(UD, KBUILD_MODNAME)) {
+	if (gpio_request_one(UD, GPIOF_OUT_INIT_LOW, KBUILD_MODNAME)) {
 		pr_err("requesting GPIO %d failed\n", UD);
 		return -EBUSY;
 	}
 
-	if (gpio_request(LBR, KBUILD_MODNAME)) {
+	if (gpio_request_one(LBR, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) {
 		pr_err("requesting GPIO %d failed\n", LBR);
 		gpio_free(UD);
 		return -EBUSY;
 	}
-
-	gpio_direction_output(UD, 0);
-	gpio_direction_output(LBR, 1);
-
 #endif
 
-	if (gpio_request(MOD, KBUILD_MODNAME)) {
+	if (gpio_request_one(MOD, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) {
 		pr_err("requesting GPIO %d failed\n", MOD);
 #if (defined(UD) && defined(LBR))
 		gpio_free(LBR);
@@ -408,8 +404,6 @@ static int __devinit request_ports(void)
 		return -EBUSY;
 	}
 
-	gpio_direction_output(MOD, 1);
-
 	SSYNC();
 	return 0;
 }
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 46b03f53985..dc2f0047769 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -240,7 +240,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi)
 	u16 eppi_req_18[] = EPPI0_18;
 	u16 disp = fbi->mach_info->disp;
 
-	if (gpio_request(disp, DRIVER_NAME)) {
+	if (gpio_request_one(disp, GPIOF_OUT_INIT_HIGH, DRIVER_NAME)) {
 		printk(KERN_ERR "Requesting GPIO %d failed\n", disp);
 		return -EFAULT;
 	}
@@ -263,8 +263,6 @@ static int request_ports(struct bfin_bf54xfb_info *fbi)
 		}
 	}
 
-	gpio_direction_output(disp, 1);
-
 	return 0;
 }
 
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c
index c633068372c..86922ac8441 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/bfin-lq035q1-fb.c
@@ -365,10 +365,10 @@ static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev,
 	 * Drive PPI_FS3 Low
 	 */
 	if (ANOMALY_05000400) {
-		int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3");
+		int ret = gpio_request_one(P_IDENT(P_PPI0_FS3),
+					GPIOF_OUT_INIT_LOW, "PPI_FS3");
 		if (ret)
 			return ret;
-		gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
 	}
 
 	if (ppi16)
@@ -716,14 +716,14 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev)
 	}
 
 	if (info->disp_info->use_bl) {
-		ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight");
+		ret = gpio_request_one(info->disp_info->gpio_bl,
+					GPIOF_OUT_INIT_LOW, "LQ035 Backlight");
 
 		if (ret) {
 			dev_err(&pdev->dev, "failed to request GPIO %d\n",
 				info->disp_info->gpio_bl);
 			goto out9;
 		}
-		gpio_direction_output(info->disp_info->gpio_bl, 0);
 	}
 
 	ret = register_framebuffer(fbinfo);
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index 811dd7f6aa4..c9928142921 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -411,12 +411,13 @@ static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client,
 
 	/* Workaround "PPI Does Not Start Properly In Specific Mode" */
 	if (ANOMALY_05000400) {
-		if (gpio_request(P_IDENT(P_PPI0_FS3), "PPI0_FS3")) {
+		ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW,
+					"PPI0_FS3")
+		if (ret) {
 			dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
 			ret = -EBUSY;
 			goto out_8;
 		}
-		gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
 	}
 
 	if (peripheral_request_list(ppi_pins, DRIVER_NAME)) {
diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/msm/mddi_client_nt35399.c
index f239f4a25e0..7fcd67e132b 100644
--- a/drivers/video/msm/mddi_client_nt35399.c
+++ b/drivers/video/msm/mddi_client_nt35399.c
@@ -155,14 +155,10 @@ static int setup_vsync(struct panel_info *panel, int init)
 		ret = 0;
 		goto uninit;
 	}
-	ret = gpio_request(gpio, "vsync");
+	ret = gpio_request_one(gpio, GPIOF_IN, "vsync");
 	if (ret)
 		goto err_request_gpio_failed;
 
-	ret = gpio_direction_input(gpio);
-	if (ret)
-		goto err_gpio_direction_input_failed;
-
 	ret = irq = gpio_to_irq(gpio);
 	if (ret < 0)
 		goto err_get_irq_num_failed;
@@ -180,7 +176,6 @@ uninit:
 	free_irq(gpio_to_irq(gpio), panel->client_data);
 err_request_irq_failed:
 err_get_irq_num_failed:
-err_gpio_direction_input_failed:
 	gpio_free(gpio);
 err_request_gpio_failed:
 	return ret;
diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/msm/mddi_client_toshiba.c
index f9bc932ac46..053eb687733 100644
--- a/drivers/video/msm/mddi_client_toshiba.c
+++ b/drivers/video/msm/mddi_client_toshiba.c
@@ -186,14 +186,10 @@ static int setup_vsync(struct panel_info *panel,
 		ret = 0;
 		goto uninit;
 	}
-	ret = gpio_request(gpio, "vsync");
+	ret = gpio_request_one(gpio, GPIOF_IN, "vsync");
 	if (ret)
 		goto err_request_gpio_failed;
 
-	ret = gpio_direction_input(gpio);
-	if (ret)
-		goto err_gpio_direction_input_failed;
-
 	ret = irq = gpio_to_irq(gpio);
 	if (ret < 0)
 		goto err_get_irq_num_failed;
@@ -210,7 +206,6 @@ uninit:
 	free_irq(gpio_to_irq(gpio), panel);
 err_request_irq_failed:
 err_get_irq_num_failed:
-err_gpio_direction_input_failed:
 	gpio_free(gpio);
 err_request_gpio_failed:
 	return ret;
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 7e8bd8e08a9..e3d3d135aa4 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 #include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
@@ -32,20 +32,18 @@ static int innovator1610_panel_init(struct lcd_panel *panel,
 {
 	int r = 0;
 
-	if (gpio_request(14, "lcd_en0")) {
+	/* configure GPIO(14, 15) as outputs */
+	if (gpio_request_one(14, GPIOF_OUT_INIT_LOW, "lcd_en0")) {
 		pr_err(MODULE_NAME ": can't request GPIO 14\n");
 		r = -1;
 		goto exit;
 	}
-	if (gpio_request(15, "lcd_en1")) {
+	if (gpio_request_one(15, GPIOF_OUT_INIT_LOW, "lcd_en1")) {
 		pr_err(MODULE_NAME ": can't request GPIO 15\n");
 		gpio_free(14);
 		r = -1;
 		goto exit;
 	}
-	/* configure GPIO(14, 15) as outputs */
-	gpio_direction_output(14, 0);
-	gpio_direction_output(15, 0);
 exit:
 	return r;
 }
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 00c5c615585..0f21fa5a16a 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1019,14 +1019,12 @@ static int taal_probe(struct omap_dss_device *dssdev)
 	if (panel_data->use_ext_te) {
 		int gpio = panel_data->ext_te_gpio;
 
-		r = gpio_request(gpio, "taal irq");
+		r = gpio_request_one(gpio, GPIOF_IN, "taal irq");
 		if (r) {
 			dev_err(&dssdev->dev, "GPIO request failed\n");
 			goto err_gpio;
 		}
 
-		gpio_direction_input(gpio);
-
 		r = request_irq(gpio_to_irq(gpio), taal_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", dssdev);
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index e6649aa8959..880c313d6bc 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -408,17 +408,12 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev)
 	}
 
 	if (gpio_is_valid(nreset_gpio)) {
-		ret = gpio_request(nreset_gpio, "lcd reset");
+		ret = gpio_request_one(nreset_gpio, GPIOF_OUT_INIT_LOW,
+					"lcd reset");
 		if (ret < 0) {
 			dev_err(&dssdev->dev, "couldn't request reset GPIO\n");
 			goto fail_gpio_req;
 		}
-
-		ret = gpio_direction_output(nreset_gpio, 0);
-		if (ret < 0) {
-			dev_err(&dssdev->dev, "couldn't set GPIO direction\n");
-			goto fail_gpio_direction;
-		}
 	}
 
 	ret = sysfs_create_group(&dssdev->dev.kobj, &tpo_td043_attr_group);
@@ -427,8 +422,6 @@ static int tpo_td043_probe(struct omap_dss_device *dssdev)
 
 	return 0;
 
-fail_gpio_direction:
-	gpio_free(nreset_gpio);
 fail_gpio_req:
 	regulator_put(tpo_td043->vcc_reg);
 fail_regulator:
-- 
cgit v1.2.3-70-g09d2


From 05e52b4bfba0d1fa4195abbc4ac29c24033c8e96 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Thu, 26 Jan 2012 19:38:45 +0900
Subject: video: s3c-fb: fix checkpatch error

This patch fixes the checkpatch error listed below:

ERROR: trailing statements should be on next line

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/s3c-fb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 7c5158dda0b..389189a9e77 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -48,7 +48,8 @@
 #undef writel
 #define writel(v, r) do { \
 	printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \
-	__raw_writel(v, r); } while (0)
+	__raw_writel(v, r); \
+} while (0)
 #endif /* FB_S3C_DEBUG_REGWRITE */
 
 /* irq_flags bits */
-- 
cgit v1.2.3-70-g09d2


From f7f31e505aa79d91b979a38789b1608744361bdc Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 27 Jan 2012 14:47:22 +0900
Subject: video: s3c-fb: add alpha value width setting

This patch adds alpha value width setting according to
transparency value of each window format, using BLENDCON
register. When alpha value is 8 bits, BLENDCON will set
alpha value width as 8 bits.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 arch/arm/plat-samsung/include/plat/regs-fb.h |  6 ++++++
 drivers/video/s3c-fb.c                       | 18 ++++++++++++++++++
 2 files changed, 24 insertions(+)

(limited to 'drivers/video')

diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index 8f39aa5b26e..6bf68ed0196 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -384,3 +384,9 @@
 #define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
 #define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
 
+/* Blending equation control */
+#define BLENDCON				(0x260)
+#define BLENDCON_NEW_MASK			(1 << 0)
+#define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
+#define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
+
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 389189a9e77..9af6c1849c2 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -82,6 +82,7 @@ struct s3c_fb;
  * @palette: Address of palette memory, or 0 if none.
  * @has_prtcon: Set if has PRTCON register.
  * @has_shadowcon: Set if has SHADOWCON register.
+ * @has_blendcon: Set if has BLENDCON register.
  * @has_clksel: Set if VIDCON0 register has CLKSEL bit.
  */
 struct s3c_fb_variant {
@@ -100,6 +101,7 @@ struct s3c_fb_variant {
 
 	unsigned int	has_prtcon:1;
 	unsigned int	has_shadowcon:1;
+	unsigned int	has_blendcon:1;
 	unsigned int	has_clksel:1;
 };
 
@@ -691,6 +693,17 @@ static int s3c_fb_set_par(struct fb_info *info)
 	writel(data, regs + sfb->variant.wincon + (win_no * 4));
 	writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
 
+	/* Set alpha value width */
+	if (sfb->variant.has_blendcon) {
+		data = readl(sfb->regs + BLENDCON);
+		data &= ~BLENDCON_NEW_MASK;
+		if (var->transp.length > 4)
+			data |= BLENDCON_NEW_8BIT_ALPHA_VALUE;
+		else
+			data |= BLENDCON_NEW_4BIT_ALPHA_VALUE;
+		writel(data, sfb->regs + BLENDCON);
+	}
+
 	shadow_protect_win(win, 0);
 
 	pm_runtime_put_sync(sfb->dev);
@@ -1798,6 +1811,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pc100 = {
 		},
 
 		.has_prtcon	= 1,
+		.has_blendcon	= 1,
 		.has_clksel	= 1,
 	},
 	.win[0]	= &s3c_fb_data_s5p_wins[0],
@@ -1829,6 +1843,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = {
 		},
 
 		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
 		.has_clksel	= 1,
 	},
 	.win[0]	= &s3c_fb_data_s5p_wins[0],
@@ -1860,6 +1875,7 @@ static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
 		},
 
 		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
 	},
 	.win[0]	= &s3c_fb_data_s5p_wins[0],
 	.win[1]	= &s3c_fb_data_s5p_wins[1],
@@ -1923,6 +1939,8 @@ static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = {
 			[1] = 0x2800,
 			[2] = 0x2c00,
 		},
+
+		.has_blendcon	= 1,
 	},
 	.win[0] = &s3c_fb_data_s5p_wins[0],
 	.win[1] = &s3c_fb_data_s5p_wins[1],
-- 
cgit v1.2.3-70-g09d2


From d8b97db4c8e40e49985fa5802be914292add64f6 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 27 Jan 2012 14:47:55 +0900
Subject: video: s3c-fb: add video clock running at data under-flow

This patch adds video clock running at data under-flow.
It means that the pixel clock is continuously provided
to lcd module, even when under-run occurs.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 arch/arm/plat-samsung/include/plat/regs-fb.h |  3 +++
 drivers/video/s3c-fb.c                       | 23 +++++++++++++++++++++++
 2 files changed, 26 insertions(+)

(limited to 'drivers/video')

diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index 6bf68ed0196..bbb16e0aa1f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -91,6 +91,9 @@
 #define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
 #define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
 #define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
+#define VIDCON1_VCLK_MASK			(0x3 << 9)
+#define VIDCON1_VCLK_HOLD			(0x0 << 9)
+#define VIDCON1_VCLK_RUN			(0x1 << 9)
 
 #define VIDCON1_INV_VCLK			(1 << 7)
 #define VIDCON1_INV_HSYNC			(1 << 6)
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 9af6c1849c2..e22bf9ddf28 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -84,6 +84,7 @@ struct s3c_fb;
  * @has_shadowcon: Set if has SHADOWCON register.
  * @has_blendcon: Set if has BLENDCON register.
  * @has_clksel: Set if VIDCON0 register has CLKSEL bit.
+ * @has_fixvclk: Set if VIDCON1 register has FIXVCLK bits.
  */
 struct s3c_fb_variant {
 	unsigned int	is_2443:1;
@@ -103,6 +104,7 @@ struct s3c_fb_variant {
 	unsigned int	has_shadowcon:1;
 	unsigned int	has_blendcon:1;
 	unsigned int	has_clksel:1;
+	unsigned int	has_fixvclk:1;
 };
 
 /**
@@ -1358,6 +1360,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 	struct resource *res;
 	int win;
 	int ret = 0;
+	u32 reg;
 
 	platid = platform_get_device_id(pdev);
 	fbdrv = (struct s3c_fb_driverdata *)platid->driver_data;
@@ -1448,6 +1451,14 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 
 	writel(pd->vidcon1, sfb->regs + VIDCON1);
 
+	/* set video clock running at under-run */
+	if (sfb->variant.has_fixvclk) {
+		reg = readl(sfb->regs + VIDCON1);
+		reg &= ~VIDCON1_VCLK_MASK;
+		reg |= VIDCON1_VCLK_RUN;
+		writel(reg, sfb->regs + VIDCON1);
+	}
+
 	/* zero all windows before we do anything */
 
 	for (win = 0; win < fbdrv->variant.nr_windows; win++)
@@ -1571,6 +1582,7 @@ static int s3c_fb_resume(struct device *dev)
 	struct s3c_fb_platdata *pd = sfb->pdata;
 	struct s3c_fb_win *win;
 	int win_no;
+	u32 reg;
 
 	clk_enable(sfb->bus_clk);
 
@@ -1581,6 +1593,14 @@ static int s3c_fb_resume(struct device *dev)
 	pd->setup_gpio();
 	writel(pd->vidcon1, sfb->regs + VIDCON1);
 
+	/* set video clock running at under-run */
+	if (sfb->variant.has_fixvclk) {
+		reg = readl(sfb->regs + VIDCON1);
+		reg &= ~VIDCON1_VCLK_MASK;
+		reg |= VIDCON1_VCLK_RUN;
+		writel(reg, sfb->regs + VIDCON1);
+	}
+
 	/* zero all windows before we do anything */
 	for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
 		s3c_fb_clear_win(sfb, win_no);
@@ -1845,6 +1865,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pv210 = {
 		.has_shadowcon	= 1,
 		.has_blendcon	= 1,
 		.has_clksel	= 1,
+		.has_fixvclk	= 1,
 	},
 	.win[0]	= &s3c_fb_data_s5p_wins[0],
 	.win[1]	= &s3c_fb_data_s5p_wins[1],
@@ -1876,6 +1897,7 @@ static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
 
 		.has_shadowcon	= 1,
 		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
 	},
 	.win[0]	= &s3c_fb_data_s5p_wins[0],
 	.win[1]	= &s3c_fb_data_s5p_wins[1],
@@ -1941,6 +1963,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5p64x0 = {
 		},
 
 		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
 	},
 	.win[0] = &s3c_fb_data_s5p_wins[0],
 	.win[1] = &s3c_fb_data_s5p_wins[1],
-- 
cgit v1.2.3-70-g09d2


From c6d242aa64d27ebd258a12aa0a5da068e25e01f5 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 27 Jan 2012 16:02:54 +0800
Subject: video: convert drivers/video/* to use module_spi_driver()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch converts the drivers in drivers/video/* to use the
module_spi_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Imre Deak <imre.deak@nokia.com>
Cc: Roger Quadros <roger.quadros@nokia.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Erik Gilling <konkers@android.com>
Cc: Gražvydas Ignotas <notasas@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/omap/lcd_mipid.c                          | 14 +-------------
 drivers/video/omap2/displays/panel-acx565akm.c          | 13 +------------
 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c | 12 +-----------
 drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c | 12 +-----------
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c     | 13 +------------
 5 files changed, 5 insertions(+), 59 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 8d546dd55e8..e3880c4a0bb 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -609,19 +609,7 @@ static struct spi_driver mipid_spi_driver = {
 	.remove	= __devexit_p(mipid_spi_remove),
 };
 
-static int __init mipid_drv_init(void)
-{
-	spi_register_driver(&mipid_spi_driver);
-
-	return 0;
-}
-module_init(mipid_drv_init);
-
-static void __exit mipid_drv_cleanup(void)
-{
-	spi_unregister_driver(&mipid_spi_driver);
-}
-module_exit(mipid_drv_cleanup);
+module_spi_driver(mipid_spi_driver);
 
 MODULE_DESCRIPTION("MIPI display driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 51a87e149e2..d26f37ac69d 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -809,18 +809,7 @@ static struct spi_driver acx565akm_spi_driver = {
 	.remove	= __devexit_p(acx565akm_spi_remove),
 };
 
-static int __init acx565akm_init(void)
-{
-	return spi_register_driver(&acx565akm_spi_driver);
-}
-
-static void __exit acx565akm_exit(void)
-{
-	spi_unregister_driver(&acx565akm_spi_driver);
-}
-
-module_init(acx565akm_init);
-module_exit(acx565akm_exit);
+module_spi_driver(acx565akm_spi_driver);
 
 MODULE_AUTHOR("Nokia Corporation");
 MODULE_DESCRIPTION("acx565akm LCD Driver");
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
index e0eb35be303..0841cc2b3f7 100644
--- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
@@ -264,16 +264,6 @@ static struct spi_driver lb035q02_spi_driver = {
 	.remove		= __devexit_p(lb035q02_panel_spi_remove),
 };
 
-static int __init lb035q02_panel_drv_init(void)
-{
-	return spi_register_driver(&lb035q02_spi_driver);
-}
-
-static void __exit lb035q02_panel_drv_exit(void)
-{
-	spi_unregister_driver(&lb035q02_spi_driver);
-}
+module_spi_driver(lb035q02_spi_driver);
 
-module_init(lb035q02_panel_drv_init);
-module_exit(lb035q02_panel_drv_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index 0eb31caddca..8b38b39213f 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -350,18 +350,8 @@ static struct spi_driver nec_8048_spi_driver = {
 	},
 };
 
-static int __init nec_8048_lcd_init(void)
-{
-	return spi_register_driver(&nec_8048_spi_driver);
-}
-
-static void __exit nec_8048_lcd_exit(void)
-{
-	return spi_unregister_driver(&nec_8048_spi_driver);
-}
+module_spi_driver(nec_8048_spi_driver);
 
-module_init(nec_8048_lcd_init);
-module_exit(nec_8048_lcd_exit);
 MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
 MODULE_DESCRIPTION("NEC-nl8048hl11-01b Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 880c313d6bc..0ca9644f9ea 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -511,18 +511,7 @@ static struct spi_driver tpo_td043_spi_driver = {
 	.remove	= __devexit_p(tpo_td043_spi_remove),
 };
 
-static int __init tpo_td043_init(void)
-{
-	return spi_register_driver(&tpo_td043_spi_driver);
-}
-
-static void __exit tpo_td043_exit(void)
-{
-	spi_unregister_driver(&tpo_td043_spi_driver);
-}
-
-module_init(tpo_td043_init);
-module_exit(tpo_td043_exit);
+module_spi_driver(tpo_td043_spi_driver);
 
 MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
 MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
-- 
cgit v1.2.3-70-g09d2


From e75892715db800ee96fe4ac0407b73b57d866a68 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 30 Jul 2011 01:25:29 +0000
Subject: viafb: add auxiliary device management infrastructure

This patch adds the basic infrastructure and a few stub drivers for
devices that are connected via I2C busses. The infrastructure will
be used to replace and extend the support that is scattered
throughout viafb. The stub drivers are not very useful yet but they
show how the infrastructure works, provide information about the
chips integrated into a system and maybe gather some testers as it
would be very difficult for a single person to get a sane test
environment.
The only thing this actually does is probing the I2C busses which
will hopefully not cause any regressions.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/Makefile         |  5 ++-
 drivers/video/via/via_aux.c        | 68 +++++++++++++++++++++++++++++
 drivers/video/via/via_aux.h        | 87 ++++++++++++++++++++++++++++++++++++++
 drivers/video/via/via_aux_ch7301.c | 50 ++++++++++++++++++++++
 drivers/video/via/via_aux_edid.c   | 40 ++++++++++++++++++
 drivers/video/via/via_aux_sii164.c | 54 +++++++++++++++++++++++
 drivers/video/via/via_aux_vt1621.c | 44 +++++++++++++++++++
 drivers/video/via/via_aux_vt1622.c | 50 ++++++++++++++++++++++
 drivers/video/via/via_aux_vt1625.c | 50 ++++++++++++++++++++++
 drivers/video/via/via_aux_vt1631.c | 46 ++++++++++++++++++++
 drivers/video/via/via_aux_vt1632.c | 54 +++++++++++++++++++++++
 drivers/video/via/via_aux_vt1636.c | 46 ++++++++++++++++++++
 drivers/video/via/viafbdev.c       | 27 ++++++++++++
 drivers/video/via/viafbdev.h       |  6 +++
 14 files changed, 626 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/via/via_aux.c
 create mode 100644 drivers/video/via/via_aux.h
 create mode 100644 drivers/video/via/via_aux_ch7301.c
 create mode 100644 drivers/video/via/via_aux_edid.c
 create mode 100644 drivers/video/via/via_aux_sii164.c
 create mode 100644 drivers/video/via/via_aux_vt1621.c
 create mode 100644 drivers/video/via/via_aux_vt1622.c
 create mode 100644 drivers/video/via/via_aux_vt1625.c
 create mode 100644 drivers/video/via/via_aux_vt1631.c
 create mode 100644 drivers/video/via/via_aux_vt1632.c
 create mode 100644 drivers/video/via/via_aux_vt1636.c

(limited to 'drivers/video')

diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index 5108136e877..159f26e6adb 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -6,4 +6,7 @@ obj-$(CONFIG_FB_VIA) += viafb.o
 
 viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
 	via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \
-	via-core.o via-gpio.o via_modesetting.o via_clock.o
+	via-core.o via-gpio.o via_modesetting.o via_clock.o \
+	via_aux.o via_aux_edid.o via_aux_vt1636.o via_aux_vt1632.o \
+	via_aux_vt1631.o via_aux_vt1625.o via_aux_vt1622.o via_aux_vt1621.o \
+	via_aux_sii164.o via_aux_ch7301.o
diff --git a/drivers/video/via/via_aux.c b/drivers/video/via/via_aux.c
new file mode 100644
index 00000000000..e728b9bec23
--- /dev/null
+++ b/drivers/video/via/via_aux.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * infrastructure for devices connected via I2C
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+struct via_aux_bus *via_aux_probe(struct i2c_adapter *adap)
+{
+	struct via_aux_bus *bus;
+
+	if (!adap)
+		return NULL;
+
+	bus = kmalloc(sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return NULL;
+
+	bus->adap = adap;
+	INIT_LIST_HEAD(&bus->drivers);
+
+	via_aux_edid_probe(bus);
+	via_aux_vt1636_probe(bus);
+	via_aux_vt1632_probe(bus);
+	via_aux_vt1631_probe(bus);
+	via_aux_vt1625_probe(bus);
+	via_aux_vt1622_probe(bus);
+	via_aux_vt1621_probe(bus);
+	via_aux_sii164_probe(bus);
+	via_aux_ch7301_probe(bus);
+
+	return bus;
+}
+
+void via_aux_free(struct via_aux_bus *bus)
+{
+	struct via_aux_drv *pos, *n;
+
+	if (!bus)
+		return;
+
+	list_for_each_entry_safe(pos, n, &bus->drivers, chain) {
+		list_del(&pos->chain);
+		kfree(pos);
+	}
+
+	kfree(bus);
+}
diff --git a/drivers/video/via/via_aux.h b/drivers/video/via/via_aux.h
new file mode 100644
index 00000000000..5a4867a2dcc
--- /dev/null
+++ b/drivers/video/via/via_aux.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * infrastructure for devices connected via I2C
+ */
+
+#ifndef __VIA_AUX_H__
+#define __VIA_AUX_H__
+
+
+#include <linux/list.h>
+#include <linux/i2c.h>
+
+
+struct via_aux_bus {
+	struct i2c_adapter *adap;	/* the I2C device to access the bus */
+	struct list_head drivers;	/* drivers for devices on this bus */
+};
+
+struct via_aux_drv {
+	struct list_head chain;		/* chain to support multiple drivers */
+
+	struct via_aux_bus *bus;	/* the I2C bus used */
+	u8 addr;			/* the I2C slave address */
+
+	const char *name;	/* human readable name of the driver */
+	void *data;		/* private data of this driver */
+};
+
+
+struct via_aux_bus *via_aux_probe(struct i2c_adapter *adap);
+void via_aux_free(struct via_aux_bus *bus);
+
+
+static inline bool via_aux_add(struct via_aux_drv *drv)
+{
+	struct via_aux_drv *data = kmalloc(sizeof(*data), GFP_KERNEL);
+
+	if (!data)
+		return false;
+
+	*data = *drv;
+	list_add_tail(&data->chain, &data->bus->drivers);
+	return true;
+}
+
+static inline bool via_aux_read(struct via_aux_drv *drv, u8 start, u8 *buf,
+	u8 len)
+{
+	struct i2c_msg msg[2] = {
+		{.addr = drv->addr, .flags = 0, .len = 1, .buf = &start},
+		{.addr = drv->addr, .flags = I2C_M_RD, .len = len, .buf = buf} };
+
+	return i2c_transfer(drv->bus->adap, msg, 2) == 2;
+}
+
+
+/* probe functions of existing drivers - should only be called in via_aux.c */
+void via_aux_ch7301_probe(struct via_aux_bus *bus);
+void via_aux_edid_probe(struct via_aux_bus *bus);
+void via_aux_sii164_probe(struct via_aux_bus *bus);
+void via_aux_vt1636_probe(struct via_aux_bus *bus);
+void via_aux_vt1632_probe(struct via_aux_bus *bus);
+void via_aux_vt1631_probe(struct via_aux_bus *bus);
+void via_aux_vt1625_probe(struct via_aux_bus *bus);
+void via_aux_vt1622_probe(struct via_aux_bus *bus);
+void via_aux_vt1621_probe(struct via_aux_bus *bus);
+
+
+#endif /* __VIA_AUX_H__ */
diff --git a/drivers/video/via/via_aux_ch7301.c b/drivers/video/via/via_aux_ch7301.c
new file mode 100644
index 00000000000..1cbe5037a6b
--- /dev/null
+++ b/drivers/video/via/via_aux_ch7301.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for Chrontel CH7301 DVI Transmitter
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "CH7301 DVI Transmitter";
+
+
+static void probe(struct via_aux_bus *bus, u8 addr)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	addr,
+		.name	=	name};
+	u8 tmp;
+
+	if (!via_aux_read(&drv, 0x4B, &tmp, 1) || tmp != 0x17)
+		return;
+
+	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
+	via_aux_add(&drv);
+}
+
+void via_aux_ch7301_probe(struct via_aux_bus *bus)
+{
+	probe(bus, 0x75);
+	probe(bus, 0x76);
+}
diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/via/via_aux_edid.c
new file mode 100644
index 00000000000..547bff53a44
--- /dev/null
+++ b/drivers/video/via/via_aux_edid.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * generic EDID driver
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "EDID";
+
+
+void via_aux_edid_probe(struct via_aux_bus *bus)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	0x50,
+		.name	=	name};
+
+	/* as EDID devices can be connected/disconnected just add the driver */
+	via_aux_add(&drv);
+}
diff --git a/drivers/video/via/via_aux_sii164.c b/drivers/video/via/via_aux_sii164.c
new file mode 100644
index 00000000000..ca1b35f033b
--- /dev/null
+++ b/drivers/video/via/via_aux_sii164.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for Silicon Image SiI 164 PanelLink Transmitter
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "SiI 164 PanelLink Transmitter";
+
+
+static void probe(struct via_aux_bus *bus, u8 addr)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	addr,
+		.name	=	name};
+	/* check vendor id and device id */
+	const u8 id[] = {0x01, 0x00, 0x06, 0x00}, len = ARRAY_SIZE(id);
+	u8 tmp[len];
+
+	if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
+		return;
+
+	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
+	via_aux_add(&drv);
+}
+
+void via_aux_sii164_probe(struct via_aux_bus *bus)
+{
+	u8 i;
+
+	for (i = 0x38; i <= 0x3F; i++)
+		probe(bus, i);
+}
diff --git a/drivers/video/via/via_aux_vt1621.c b/drivers/video/via/via_aux_vt1621.c
new file mode 100644
index 00000000000..38eca847989
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1621.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1621(M) TV Encoder
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1621(M) TV Encoder";
+
+
+void via_aux_vt1621_probe(struct via_aux_bus *bus)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	0x20,
+		.name	=	name};
+	u8 tmp;
+
+	if (!via_aux_read(&drv, 0x1B, &tmp, 1) || tmp != 0x02)
+		return;
+
+	printk(KERN_INFO "viafb: Found %s\n", name);
+	via_aux_add(&drv);
+}
diff --git a/drivers/video/via/via_aux_vt1622.c b/drivers/video/via/via_aux_vt1622.c
new file mode 100644
index 00000000000..8c79c68ba68
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1622.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1622(M) Digital TV Encoder
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1622(M) Digital TV Encoder";
+
+
+static void probe(struct via_aux_bus *bus, u8 addr)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	addr,
+		.name	=	name};
+	u8 tmp;
+
+	if (!via_aux_read(&drv, 0x1B, &tmp, 1) ||  tmp != 0x03)
+		return;
+
+	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
+	via_aux_add(&drv);
+}
+
+void via_aux_vt1622_probe(struct via_aux_bus *bus)
+{
+	probe(bus, 0x20);
+	probe(bus, 0x21);
+}
diff --git a/drivers/video/via/via_aux_vt1625.c b/drivers/video/via/via_aux_vt1625.c
new file mode 100644
index 00000000000..03eb30165d3
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1625.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1625(M) HDTV Encoder
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1625(M) HDTV Encoder";
+
+
+static void probe(struct via_aux_bus *bus, u8 addr)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	addr,
+		.name	=	name};
+	u8 tmp;
+
+	if (!via_aux_read(&drv, 0x1B, &tmp, 1) || tmp != 0x50)
+		return;
+
+	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
+	via_aux_add(&drv);
+}
+
+void via_aux_vt1625_probe(struct via_aux_bus *bus)
+{
+	probe(bus, 0x20);
+	probe(bus, 0x21);
+}
diff --git a/drivers/video/via/via_aux_vt1631.c b/drivers/video/via/via_aux_vt1631.c
new file mode 100644
index 00000000000..06e742f1f72
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1631.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1631 LVDS Transmitter
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1631 LVDS Transmitter";
+
+
+void via_aux_vt1631_probe(struct via_aux_bus *bus)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	0x38,
+		.name	=	name};
+	/* check vendor id and device id */
+	const u8 id[] = {0x06, 0x11, 0x91, 0x31}, len = ARRAY_SIZE(id);
+	u8 tmp[len];
+
+	if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
+		return;
+
+	printk(KERN_INFO "viafb: Found %s\n", name);
+	via_aux_add(&drv);
+}
diff --git a/drivers/video/via/via_aux_vt1632.c b/drivers/video/via/via_aux_vt1632.c
new file mode 100644
index 00000000000..d24f4cd9740
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1632.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1632 DVI Transmitter
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1632 DVI Transmitter";
+
+
+static void probe(struct via_aux_bus *bus, u8 addr)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	addr,
+		.name	=	name};
+	/* check vendor id and device id */
+	const u8 id[] = {0x06, 0x11, 0x92, 0x31}, len = ARRAY_SIZE(id);
+	u8 tmp[len];
+
+	if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
+		return;
+
+	printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
+	via_aux_add(&drv);
+}
+
+void via_aux_vt1632_probe(struct via_aux_bus *bus)
+{
+	u8 i;
+
+	for (i = 0x08; i <= 0x0F; i++)
+		probe(bus, i);
+}
diff --git a/drivers/video/via/via_aux_vt1636.c b/drivers/video/via/via_aux_vt1636.c
new file mode 100644
index 00000000000..9e015c101d4
--- /dev/null
+++ b/drivers/video/via/via_aux_vt1636.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * driver for VIA VT1636 LVDS Transmitter
+ */
+
+#include <linux/slab.h>
+#include "via_aux.h"
+
+
+static const char *name = "VT1636 LVDS Transmitter";
+
+
+void via_aux_vt1636_probe(struct via_aux_bus *bus)
+{
+	struct via_aux_drv drv = {
+		.bus	=	bus,
+		.addr	=	0x40,
+		.name	=	name};
+	/* check vendor id and device id */
+	const u8 id[] = {0x06, 0x11, 0x45, 0x33}, len = ARRAY_SIZE(id);
+	u8 tmp[len];
+
+	if (!via_aux_read(&drv, 0x00, tmp, len) || memcmp(id, tmp, len))
+		return;
+
+	printk(KERN_INFO "viafb: Found %s\n", name);
+	via_aux_add(&drv);
+}
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index a13c258bd32..6d5b6492323 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include <asm/olpc.h>
 
 #define _MASTER_FILE
@@ -1729,6 +1730,29 @@ static struct viafb_pm_hooks viafb_fb_pm_hooks = {
 
 #endif
 
+static void __devinit i2c_bus_probe(struct viafb_shared *shared)
+{
+	/* should be always CRT */
+	printk(KERN_INFO "viafb: Probing I2C bus 0x26\n");
+	shared->i2c_26 = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_26));
+
+	/* seems to be usually DVP1 */
+	printk(KERN_INFO "viafb: Probing I2C bus 0x31\n");
+	shared->i2c_31 = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_31));
+
+	/* FIXME: what is this? */
+	printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n");
+	shared->i2c_2C = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_2C));
+
+	printk(KERN_INFO "viafb: Finished I2C bus probing");
+}
+
+static void i2c_bus_free(struct viafb_shared *shared)
+{
+	via_aux_free(shared->i2c_26);
+	via_aux_free(shared->i2c_31);
+	via_aux_free(shared->i2c_2C);
+}
 
 int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 {
@@ -1762,6 +1786,7 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 		&viaparinfo->shared->lvds_setting_info2;
 	viaparinfo->chip_info = &viaparinfo->shared->chip_info;
 
+	i2c_bus_probe(viaparinfo->shared);
 	if (viafb_dual_fb)
 		viafb_SAMM_ON = 1;
 	parse_lcd_port();
@@ -1915,6 +1940,7 @@ out_fb1_release:
 	if (viafbinfo1)
 		framebuffer_release(viafbinfo1);
 out_fb_release:
+	i2c_bus_free(viaparinfo->shared);
 	framebuffer_release(viafbinfo);
 	return rc;
 }
@@ -1927,6 +1953,7 @@ void __devexit via_fb_pci_remove(struct pci_dev *pdev)
 	if (viafb_dual_fb)
 		unregister_framebuffer(viafbinfo1);
 	viafb_remove_proc(viaparinfo->shared);
+	i2c_bus_free(viaparinfo->shared);
 	framebuffer_release(viafbinfo);
 	if (viafb_dual_fb)
 		framebuffer_release(viafbinfo1);
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index d9440635d1d..f6b2ddf56e9 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -26,6 +26,7 @@
 #include <linux/fb.h>
 #include <linux/spinlock.h>
 
+#include "via_aux.h"
 #include "ioctl.h"
 #include "share.h"
 #include "chip.h"
@@ -48,6 +49,11 @@ struct viafb_shared {
 	struct proc_dir_entry *iga2_proc_entry;
 	struct viafb_dev *vdev;			/* Global dev info */
 
+	/* I2C busses that may have auxiliary devices */
+	struct via_aux_bus *i2c_26;
+	struct via_aux_bus *i2c_31;
+	struct via_aux_bus *i2c_2C;
+
 	/* All the information will be needed to set engine */
 	struct tmds_setting_information tmds_setting_info;
 	struct lvds_setting_information lvds_setting_info;
-- 
cgit v1.2.3-70-g09d2


From e0e12a9282a879577ba8e35c73ff5d94ae1f50b9 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed, 19 Oct 2011 12:36:44 +0000
Subject: viafb: set correct polarity for second adapter

This patch sets the correct polarity for the second adapter when
viafb_SAMM_ON is set and viafb_dual_fb is not set. Just one step to
make this mode useful.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/hw.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index d5aaca9cfa7..08c10366f75 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1758,13 +1758,13 @@ static void set_display_channel(void)
 	}
 }
 
-static u8 get_sync(struct fb_info *info)
+static u8 get_sync(struct fb_var_screeninfo *var)
 {
 	u8 polarity = 0;
 
-	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+	if (!(var->sync & FB_SYNC_HOR_HIGH_ACT))
 		polarity |= VIA_HSYNC_NEGATIVE;
-	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+	if (!(var->sync & FB_SYNC_VERT_HIGH_ACT))
 		polarity |= VIA_VSYNC_NEGATIVE;
 	return polarity;
 }
@@ -1976,13 +1976,13 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 			viafb_DeviceStatus = CRT_Device;
 	}
 	device_on();
-	if (!viafb_dual_fb)
-		via_set_sync_polarity(devices, get_sync(viafbinfo));
+	if (!viafb_SAMM_ON)
+		via_set_sync_polarity(devices, get_sync(&viafbinfo->var));
 	else {
 		via_set_sync_polarity(viaparinfo->shared->iga1_devices,
-			get_sync(viafbinfo));
+			get_sync(&viafbinfo->var));
 		via_set_sync_polarity(viaparinfo->shared->iga2_devices,
-			get_sync(viafbinfo1));
+			get_sync(&var2));
 	}
 
 	clock.set_engine_pll_state(VIA_STATE_ON);
-- 
cgit v1.2.3-70-g09d2


From 561c9079ea1de24f8d49c73391811c547d1b2636 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed, 19 Oct 2011 12:59:50 +0000
Subject: viafb: fill xres and yres

This patch fills xres and yres in var which is required when a
temporary var is genereated when viafb_SAMM_ON is set and
viafb_dual_fb is not set. It also removes an obsolete comment.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/hw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 08c10366f75..399d50754c4 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -2125,7 +2125,6 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 	}
 }
 
-/*According var's xres, yres fill var's other timing information*/
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
 	struct crt_mode_table *mode)
 {
@@ -2134,6 +2133,8 @@ void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
 	crt_reg = mode->crtc;
 	var->pixclock = 1000000000 / (crt_reg.hor_total * crt_reg.ver_total)
 		* 1000 / mode->refresh_rate;
+	var->xres = crt_reg.hor_addr;
+	var->yres = crt_reg.ver_addr;
 	var->left_margin =
 	    crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
 	var->right_margin = crt_reg.hor_sync_start - crt_reg.hor_addr;
-- 
cgit v1.2.3-70-g09d2


From 532f9169db21fbffd07cc44075c7ea1859c07806 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed, 19 Oct 2011 20:32:50 +0000
Subject: viafb: make single framebuffer multiple adapter mode work

This patch implementes this mode (viafb_SAMM_ON set and
viafb_dual_fb not set) in a useful way for CRT and DVI devices.
The same content is shown on both devices in different video modes.
The first (primary) resolution must not be bigger than the secondary
one and determines the visible region. The same content is shown
centered on the secondary output.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/dvi.c |  5 +++--
 drivers/video/via/dvi.h |  3 ++-
 drivers/video/via/hw.c  | 41 +++++++++++++++++++++++------------------
 drivers/video/via/hw.h  |  3 ++-
 4 files changed, 30 insertions(+), 22 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 9138e517267..3312c81e861 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -172,7 +172,8 @@ static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
 }
 
 /* DVI Set Mode */
-void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, int iga)
+void viafb_dvi_set_mode(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres, int iga)
 {
 	struct fb_var_screeninfo dvi_var = *var;
 	struct crt_mode_table *rb_mode;
@@ -185,7 +186,7 @@ void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, int iga)
 			viafb_fill_var_timing_info(&dvi_var, rb_mode);
 	}
 
-	viafb_fill_crtc_timing(&dvi_var, iga);
+	viafb_fill_crtc_timing(&dvi_var, cxres, cyres, iga);
 }
 
 /* Sense DVI Connector */
diff --git a/drivers/video/via/dvi.h b/drivers/video/via/dvi.h
index e2116aaf797..db757850c21 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/via/dvi.h
@@ -59,6 +59,7 @@ void viafb_dvi_enable(void);
 bool __devinit viafb_tmds_trasmitter_identify(void);
 void __devinit viafb_init_dvi_size(struct tmds_chip_information *tmds_chip,
 	struct tmds_setting_information *tmds_setting);
-void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, int iga);
+void viafb_dvi_set_mode(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres, int iga);
 
 #endif /* __DVI_H__ */
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 399d50754c4..e8725c5235c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1467,28 +1467,31 @@ void viafb_set_vclock(u32 clk, int set_iga)
 	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
 }
 
-static struct display_timing var_to_timing(const struct fb_var_screeninfo *var)
+static struct display_timing var_to_timing(const struct fb_var_screeninfo *var, u16 cxres, u16 cyres)
 {
 	struct display_timing timing;
+	u16 dx = (var->xres - cxres) / 2, dy = (var->yres - cyres) / 2;
 
-	timing.hor_addr = var->xres;
-	timing.hor_sync_start = timing.hor_addr + var->right_margin;
+	timing.hor_addr = cxres;
+	timing.hor_sync_start = timing.hor_addr + var->right_margin + dx;
 	timing.hor_sync_end = timing.hor_sync_start + var->hsync_len;
-	timing.hor_total = timing.hor_sync_end + var->left_margin;
-	timing.hor_blank_start = timing.hor_addr;
-	timing.hor_blank_end = timing.hor_total;
-	timing.ver_addr = var->yres;
-	timing.ver_sync_start = timing.ver_addr + var->lower_margin;
+	timing.hor_total = timing.hor_sync_end + var->left_margin + dx;
+	timing.hor_blank_start = timing.hor_addr + dx;
+	timing.hor_blank_end = timing.hor_total - dy;
+	timing.ver_addr = cyres;
+	timing.ver_sync_start = timing.ver_addr + var->lower_margin + dy;
 	timing.ver_sync_end = timing.ver_sync_start + var->vsync_len;
-	timing.ver_total = timing.ver_sync_end + var->upper_margin;
-	timing.ver_blank_start = timing.ver_addr;
-	timing.ver_blank_end = timing.ver_total;
+	timing.ver_total = timing.ver_sync_end + var->upper_margin + dy;
+	timing.ver_blank_start = timing.ver_addr + dy;
+	timing.ver_blank_end = timing.ver_total - dy;
 	return timing;
 }
 
-void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var, int iga)
+void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres, int iga)
 {
-	struct display_timing crt_reg = var_to_timing(var);
+	struct display_timing crt_reg = var_to_timing(var,
+		cxres ? cxres : var->xres, cyres ? cyres : var->yres);
 
 	if (iga == IGA1)
 		via_set_primary_timing(&crt_reg);
@@ -1842,7 +1845,7 @@ static void hw_init(void)
 
 int viafb_setmode(int video_bpp, int video_bpp1)
 {
-	int j;
+	int j, cxres = 0, cyres = 0;
 	int port;
 	u32 devices = viaparinfo->shared->iga1_devices
 		| viaparinfo->shared->iga2_devices;
@@ -1891,6 +1894,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	} else if (viafb_SAMM_ON) {
 		viafb_fill_var_timing_info(&var2, viafb_get_best_mode(
 			viafb_second_xres, viafb_second_yres, viafb_refresh1));
+		cxres = viafbinfo->var.xres;
+		cyres = viafbinfo->var.yres;
 		var2.bits_per_pixel = viafbinfo->var.bits_per_pixel;
 	}
 
@@ -1898,9 +1903,9 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_CRT_ON) {
 		if (viaparinfo->shared->iga2_devices & VIA_CRT
 			&& viafb_SAMM_ON)
-			viafb_fill_crtc_timing(&var2, IGA2);
+			viafb_fill_crtc_timing(&var2, cxres, cyres, IGA2);
 		else
-			viafb_fill_crtc_timing(&viafbinfo->var,
+			viafb_fill_crtc_timing(&viafbinfo->var, 0, 0,
 				(viaparinfo->shared->iga1_devices & VIA_CRT)
 				? IGA1 : IGA2);
 
@@ -1918,9 +1923,9 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_DVI_ON) {
 		if (viaparinfo->shared->tmds_setting_info.iga_path == IGA2
 			&& viafb_SAMM_ON)
-			viafb_dvi_set_mode(&var2, IGA2);
+			viafb_dvi_set_mode(&var2, cxres, cyres, IGA2);
 		else
-			viafb_dvi_set_mode(&viafbinfo->var,
+			viafb_dvi_set_mode(&viafbinfo->var, 0, 0,
 				viaparinfo->tmds_setting_info->iga_path);
 	}
 
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 4db5b6e8d8d..f8129e49aa2 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -637,7 +637,8 @@ extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
 
-void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var, int iga);
+void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres, int iga);
 void viafb_set_vclock(u32 CLK, int set_iga);
 void viafb_load_reg(int timing_value, int viafb_load_reg_num,
 	struct io_register *reg,
-- 
cgit v1.2.3-70-g09d2


From 4e5527c9d1f373cb7dda6eec3af1d7b9659cdf85 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 12 Feb 2012 20:08:41 +0000
Subject: viafb: make SAMM to also work on LCD

This patch enables LCD to handle SAMM without dual fb.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/chip.h |  2 --
 drivers/video/via/hw.c   | 27 +++++++++++----------------
 drivers/video/via/lcd.c  | 18 +++++++++---------
 drivers/video/via/lcd.h  |  3 ++-
 4 files changed, 22 insertions(+), 28 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 3ebf20c06ee..c2ecdb5a94d 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -146,8 +146,6 @@ struct tmds_setting_information {
 
 struct lvds_setting_information {
 	int iga_path;
-	int h_active;
-	int v_active;
 	int bpp;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index e8725c5235c..d35ced70139 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1530,11 +1530,7 @@ void viafb_update_device_setting(int hres, int vres, int bpp, int flag)
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
 
-		viaparinfo->lvds_setting_info->h_active = hres;
-		viaparinfo->lvds_setting_info->v_active = vres;
 		viaparinfo->lvds_setting_info->bpp = bpp;
-		viaparinfo->lvds_setting_info2->h_active = hres;
-		viaparinfo->lvds_setting_info2->v_active = vres;
 		viaparinfo->lvds_setting_info2->bpp = bpp;
 	} else {
 
@@ -1543,16 +1539,11 @@ void viafb_update_device_setting(int hres, int vres, int bpp, int flag)
 			viaparinfo->tmds_setting_info->v_active = vres;
 		}
 
-		if (viaparinfo->lvds_setting_info->iga_path == IGA2) {
-			viaparinfo->lvds_setting_info->h_active = hres;
-			viaparinfo->lvds_setting_info->v_active = vres;
+		if (viaparinfo->lvds_setting_info->iga_path == IGA2)
 			viaparinfo->lvds_setting_info->bpp = bpp;
-		}
-		if (IGA2 == viaparinfo->lvds_setting_info2->iga_path) {
-			viaparinfo->lvds_setting_info2->h_active = hres;
-			viaparinfo->lvds_setting_info2->v_active = vres;
+
+		if (IGA2 == viaparinfo->lvds_setting_info2->iga_path)
 			viaparinfo->lvds_setting_info2->bpp = bpp;
-		}
 	}
 }
 
@@ -1933,7 +1924,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 		if (viafb_SAMM_ON &&
 			(viaparinfo->lvds_setting_info->iga_path == IGA2)) {
 			viaparinfo->lvds_setting_info->bpp = video_bpp1;
-			viafb_lcd_set_mode(viaparinfo->lvds_setting_info,
+			viafb_lcd_set_mode(&var2, cxres, cyres,
+				viaparinfo->lvds_setting_info,
 				&viaparinfo->chip_info->lvds_chip_info);
 		} else {
 			/* IGA1 doesn't have LCD scaling, so set it center. */
@@ -1942,7 +1934,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 				    LCD_CENTERING;
 			}
 			viaparinfo->lvds_setting_info->bpp = video_bpp;
-			viafb_lcd_set_mode(viaparinfo->lvds_setting_info,
+			viafb_lcd_set_mode(&viafbinfo->var, 0, 0,
+				viaparinfo->lvds_setting_info,
 				&viaparinfo->chip_info->lvds_chip_info);
 		}
 	}
@@ -1950,7 +1943,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 		if (viafb_SAMM_ON &&
 			(viaparinfo->lvds_setting_info2->iga_path == IGA2)) {
 			viaparinfo->lvds_setting_info2->bpp = video_bpp1;
-			viafb_lcd_set_mode(viaparinfo->lvds_setting_info2,
+			viafb_lcd_set_mode(&var2, cxres, cyres,
+				viaparinfo->lvds_setting_info2,
 				&viaparinfo->chip_info->lvds_chip_info2);
 		} else {
 			/* IGA1 doesn't have LCD scaling, so set it center. */
@@ -1959,7 +1953,8 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 				    LCD_CENTERING;
 			}
 			viaparinfo->lvds_setting_info2->bpp = video_bpp;
-			viafb_lcd_set_mode(viaparinfo->lvds_setting_info2,
+			viafb_lcd_set_mode(&viafbinfo->var, 0, 0,
+				viaparinfo->lvds_setting_info2,
 				&viaparinfo->chip_info->lvds_chip_info2);
 		}
 	}
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 5f3b4e394e8..02cfdc8d7ed 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -55,8 +55,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		      int panel_vres);
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
-				   struct lvds_chip_information
-				   *plvds_chip_info);
+	struct lvds_chip_information *plvds_chip_info, int hres);
 static void lcd_patch_skew_dvp0(struct lvds_setting_information
 			 *plvds_setting_info,
 			 struct lvds_chip_information *plvds_chip_info);
@@ -456,14 +455,13 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 
 static void via_pitch_alignment_patch_lcd(
 	struct lvds_setting_information *plvds_setting_info,
-				   struct lvds_chip_information
-				   *plvds_chip_info)
+	struct lvds_chip_information *plvds_chip_info, int hres)
 {
 	unsigned char cr13, cr35, cr65, cr66, cr67;
 	unsigned long dwScreenPitch = 0;
 	unsigned long dwPitch;
 
-	dwPitch = plvds_setting_info->h_active * (plvds_setting_info->bpp >> 3);
+	dwPitch = hres * (plvds_setting_info->bpp >> 3);
 	if (dwPitch & 0x1F) {
 		dwScreenPitch = ((dwPitch + 31) & ~31) >> 3;
 		if (plvds_setting_info->iga_path == IGA2) {
@@ -548,13 +546,14 @@ static void lcd_patch_skew(struct lvds_setting_information
 }
 
 /* LCD Set Mode */
-void viafb_lcd_set_mode(struct lvds_setting_information *plvds_setting_info,
+void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
+	u16 cyres, struct lvds_setting_information *plvds_setting_info,
 	struct lvds_chip_information *plvds_chip_info)
 {
 	int set_iga = plvds_setting_info->iga_path;
 	int mode_bpp = plvds_setting_info->bpp;
-	int set_hres = plvds_setting_info->h_active;
-	int set_vres = plvds_setting_info->v_active;
+	int set_hres = cxres ? cxres : var->xres;
+	int set_vres = cyres ? cyres : var->yres;
 	int panel_hres = plvds_setting_info->lcd_panel_hres;
 	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 clock;
@@ -613,7 +612,8 @@ void viafb_lcd_set_mode(struct lvds_setting_information *plvds_setting_info,
 		viafb_write_reg_mask(CR6A, VIACR, 0x01, BIT0);
 
 	/* Patch for non 32bit alignment mode */
-	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info);
+	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info,
+		set_hres);
 }
 
 static void integrated_lvds_disable(struct lvds_setting_information
diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h
index 77ca7b862e6..8f3e4e06156 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/via/lcd.h
@@ -76,7 +76,8 @@ void __devinit viafb_init_lvds_output_interface(struct lvds_chip_information
 				*plvds_chip_info,
 				struct lvds_setting_information
 				*plvds_setting_info);
-void viafb_lcd_set_mode(struct lvds_setting_information *plvds_setting_info,
+void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
+	u16 cyres, struct lvds_setting_information *plvds_setting_info,
 	struct lvds_chip_information *plvds_chip_info);
 bool __devinit viafb_lvds_trasmitter_identify(void);
 void viafb_init_lvds_output_interface(struct lvds_chip_information
-- 
cgit v1.2.3-70-g09d2


From 2c4c8a8a73b64a8ea86ad85d8a59a5914d2f81ea Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Thu, 29 Dec 2011 23:37:07 +0000
Subject: viafb: fix I2C emulation on GPIO ports

This patch fixes the I2C emulation on GPIO ports by enabling it
(software controlled) and disabling the output on a GPIO line before
reading it.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/via_i2c.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/via_i2c.c b/drivers/video/via/via_i2c.c
index 78f1405dbab..dd53058bbbb 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/via/via_i2c.c
@@ -51,7 +51,7 @@ static void via_i2c_setscl(void *data, int state)
 		val |= 0x01;
 		break;
 	case VIA_PORT_GPIO:
-		val |= 0x80;
+		val |= 0x82;
 		break;
 	default:
 		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
@@ -67,6 +67,9 @@ static int via_i2c_getscl(void *data)
 	int ret = 0;
 
 	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (adap_data->type == VIA_PORT_GPIO)
+		via_write_reg_mask(adap_data->io_port, adap_data->ioport_index,
+			0, 0x80);
 	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x08)
 		ret = 1;
 	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
@@ -80,6 +83,9 @@ static int via_i2c_getsda(void *data)
 	int ret = 0;
 
 	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (adap_data->type == VIA_PORT_GPIO)
+		via_write_reg_mask(adap_data->io_port, adap_data->ioport_index,
+			0, 0x40);
 	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x04)
 		ret = 1;
 	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
@@ -103,7 +109,7 @@ static void via_i2c_setsda(void *data, int state)
 		val |= 0x01;
 		break;
 	case VIA_PORT_GPIO:
-		val |= 0x40;
+		val |= 0x42;
 		break;
 	default:
 		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
-- 
cgit v1.2.3-70-g09d2


From c718a54649475cc397484f96e70f6d0fdd267165 Mon Sep 17 00:00:00 2001
From: Danny Kukawka <danny.kukawka@bisect.de>
Date: Mon, 30 Jan 2012 23:00:17 +0100
Subject: riva/fbdev: fix several -Wuninitialized

Fix several -Wuninitialized compiler warnings by changing the
order of getting modedb in riva_update_default_var() to set
first the fallback and then the prefered timing.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/riva/fbdev.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index 2f58cf9c813..90df1a60bd1 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -1816,6 +1816,8 @@ static void __devinit riva_update_default_var(struct fb_var_screeninfo *var,
 			     specs->modedb, specs->modedb_len,
 			     NULL, 8);
 	} else if (specs->modedb != NULL) {
+		/* get first mode in database as fallback */
+		modedb = specs->modedb[0];
 		/* get preferred timing */
 		if (info->monspecs.misc & FB_MISC_1ST_DETAIL) {
 			int i;
@@ -1826,9 +1828,6 @@ static void __devinit riva_update_default_var(struct fb_var_screeninfo *var,
 					break;
 				}
 			}
-		} else {
-			/* otherwise, get first mode in database */
-			modedb = specs->modedb[0];
 		}
 		var->bits_per_pixel = 8;
 		riva_update_var(var, &modedb);
-- 
cgit v1.2.3-70-g09d2


From 3a84409ce3cccdbe1753dd9fd4eb1a7a9dded5c3 Mon Sep 17 00:00:00 2001
From: "Manjunathappa, Prakash" <prakash.pm@ti.com>
Date: Thu, 9 Feb 2012 10:34:38 +0530
Subject: video: da8xx-fb: Fix build warning on unused label

Patch fixes build warning on label "err_cpu_freq" when CONFIG_CPU_FREQ
is not defined.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/da8xx-fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 9ecc30744c6..720cb837fed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1270,8 +1270,8 @@ static int __devinit fb_probe(struct platform_device *device)
 irq_freq:
 #ifdef CONFIG_CPU_FREQ
 	lcd_da8xx_cpufreq_deregister(par);
-#endif
 err_cpu_freq:
+#endif
 	unregister_framebuffer(da8xx_fb_info);
 
 err_dealloc_cmap:
-- 
cgit v1.2.3-70-g09d2


From 12fa8350244d73b6111ec9bc6c2fd5d49fa601b5 Mon Sep 17 00:00:00 2001
From: "Manjunathappa, Prakash" <prakash.pm@ti.com>
Date: Thu, 9 Feb 2012 11:54:06 +0530
Subject: video:da8xx-fb: calculate pixel clock period for the panel

Patch calculates pixel clock period in pico seconds and updates
the same in variable screen information structure. fbset utility
uses this information.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/da8xx-fb.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 720cb837fed..dd80386b0ed 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -32,6 +32,7 @@
 #include <linux/console.h>
 #include <linux/slab.h>
 #include <video/da8xx-fb.h>
+#include <asm/div64.h>
 
 #define DRIVER_NAME "da8xx_lcdc"
 
@@ -175,7 +176,6 @@ static struct fb_var_screeninfo da8xx_fb_var __devinitdata = {
 	.activate = 0,
 	.height = -1,
 	.width = -1,
-	.pixclock = 46666,	/* 46us - AUO display */
 	.accel_flags = 0,
 	.left_margin = LEFT_MARGIN,
 	.right_margin = RIGHT_MARGIN,
@@ -1051,6 +1051,22 @@ static struct fb_ops da8xx_fb_ops = {
 	.fb_blank = cfb_blank,
 };
 
+/* Calculate and return pixel clock period in pico seconds */
+static unsigned int da8xxfb_pixel_clk_period(struct da8xx_fb_par *par)
+{
+	unsigned int lcd_clk, div;
+	unsigned int configured_pix_clk;
+	unsigned long long pix_clk_period_picosec = 1000000000000ULL;
+
+	lcd_clk = clk_get_rate(par->lcdc_clk);
+	div = lcd_clk / par->pxl_clk;
+	configured_pix_clk = (lcd_clk / div);
+
+	do_div(pix_clk_period_picosec, configured_pix_clk);
+
+	return pix_clk_period_picosec;
+}
+
 static int __devinit fb_probe(struct platform_device *device)
 {
 	struct da8xx_lcdc_platform_data *fb_pdata =
@@ -1215,6 +1231,7 @@ static int __devinit fb_probe(struct platform_device *device)
 
 	da8xx_fb_var.hsync_len = lcdc_info->hsw;
 	da8xx_fb_var.vsync_len = lcdc_info->vsw;
+	da8xx_fb_var.pixclock = da8xxfb_pixel_clk_period(par);
 
 	/* Initialize fbinfo */
 	da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
-- 
cgit v1.2.3-70-g09d2


From 7258cc14f310b912b6fea5421aedb9beb69d8581 Mon Sep 17 00:00:00 2001
From: Donghwa Lee <dh09.lee@samsung.com>
Date: Wed, 8 Feb 2012 12:47:39 -0800
Subject: video: support MIPI-DSI controller driver

Samsung S5PC210 and EXYNOS SoC platform has MIPI-DSI controller and
MIPI-DSI based LCD Panel could be used with it.  This patch supports
MIPI-DSI driver based Samsung SoC chip.

LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at
machine code and LCD panel driver specific function registered to
mipi_dsim_ddi structure at lcd panel init function called system init.  In
the MIPI-DSI driver, find lcd panel driver by using registered lcd panel
name, and then initialize lcd panel driver.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/Kconfig                           |   2 +-
 drivers/video/Makefile                          |   2 +
 drivers/video/exynos/Kconfig                    |  22 +
 drivers/video/exynos/Makefile                   |   6 +
 drivers/video/exynos/exynos_mipi_dsi.c          | 600 ++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi_common.c   | 896 ++++++++++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi_common.h   |  46 ++
 drivers/video/exynos/exynos_mipi_dsi_lowlevel.c | 618 ++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi_lowlevel.h | 112 +++
 drivers/video/exynos/exynos_mipi_dsi_regs.h     | 149 ++++
 include/video/exynos_mipi_dsim.h                | 359 ++++++++++
 11 files changed, 2811 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/exynos/Kconfig
 create mode 100644 drivers/video/exynos/Makefile
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi.c
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi_common.c
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi_common.h
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
 create mode 100644 drivers/video/exynos/exynos_mipi_dsi_regs.h
 create mode 100644 include/video/exynos_mipi_dsim.h

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6ca0c407c14..e61d7ce3559 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2411,7 +2411,7 @@ config FB_PUV3_UNIGFX
 
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
-
+source "drivers/video/exynos/Kconfig"
 source "drivers/video/backlight/Kconfig"
 
 if VT
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 142606814d9..274b04ebede 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
 obj-y				  += backlight/
 
+obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
+
 obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
 obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
 obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
new file mode 100644
index 00000000000..645b8a59719
--- /dev/null
+++ b/drivers/video/exynos/Kconfig
@@ -0,0 +1,22 @@
+#
+# Exynos Video configuration
+#
+
+menuconfig EXYNOS_VIDEO
+	bool "Exynos Video driver support"
+	help
+	  This enables support for EXYNOS Video device.
+
+if EXYNOS_VIDEO
+
+#
+# MIPI DSI driver
+#
+
+config EXYNOS_MIPI_DSI
+	bool "EXYNOS MIPI DSI driver support."
+	depends on (ARCH_S5PV210 || ARCH_EXYNOS)
+	help
+	  This enables support for MIPI-DSI device.
+
+endif # EXYNOS_VIDEO
diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile
new file mode 100644
index 00000000000..a1ae82abd6b
--- /dev/null
+++ b/drivers/video/exynos/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the exynos video drivers.
+#
+
+obj-$(CONFIG_EXYNOS_MIPI_DSI)		+= exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
+				     	exynos_mipi_dsi_lowlevel.o
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
new file mode 100644
index 00000000000..557091dc0e9
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -0,0 +1,600 @@
+/* linux/drivers/video/exynos/exynos_mipi_dsi.c
+ *
+ * Samsung SoC MIPI-DSIM driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/notifier.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <video/exynos_mipi_dsim.h>
+
+#include <plat/fb.h>
+
+#include "exynos_mipi_dsi_common.h"
+#include "exynos_mipi_dsi_lowlevel.h"
+
+struct mipi_dsim_ddi {
+	int				bus_id;
+	struct list_head		list;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+};
+
+static LIST_HEAD(dsim_ddi_list);
+
+static DEFINE_MUTEX(mipi_dsim_lock);
+
+static struct mipi_dsim_platform_data *to_dsim_plat(struct platform_device
+							*pdev)
+{
+	return pdev->dev.platform_data;
+}
+
+static struct regulator_bulk_data supplies[] = {
+	{ .supply = "vdd10", },
+	{ .supply = "vdd18", },
+};
+
+static int exynos_mipi_regulator_enable(struct mipi_dsim_device *dsim)
+{
+	int ret;
+
+	mutex_lock(&dsim->lock);
+	ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+	mutex_unlock(&dsim->lock);
+
+	return ret;
+}
+
+static int exynos_mipi_regulator_disable(struct mipi_dsim_device *dsim)
+{
+	int ret;
+
+	mutex_lock(&dsim->lock);
+	ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+	mutex_unlock(&dsim->lock);
+
+	return ret;
+}
+
+/* update all register settings to MIPI DSI controller. */
+static void exynos_mipi_update_cfg(struct mipi_dsim_device *dsim)
+{
+	/*
+	 * data from Display controller(FIMD) is not transferred in video mode
+	 * but in case of command mode, all settings is not updated to
+	 * registers.
+	 */
+	exynos_mipi_dsi_stand_by(dsim, 0);
+
+	exynos_mipi_dsi_init_dsim(dsim);
+	exynos_mipi_dsi_init_link(dsim);
+
+	exynos_mipi_dsi_set_hs_enable(dsim);
+
+	/* set display timing. */
+	exynos_mipi_dsi_set_display_mode(dsim, dsim->dsim_config);
+
+	/*
+	 * data from Display controller(FIMD) is transferred in video mode
+	 * but in case of command mode, all settigs is updated to registers.
+	 */
+	exynos_mipi_dsi_stand_by(dsim, 1);
+}
+
+static int exynos_mipi_dsi_early_blank_mode(struct mipi_dsim_device *dsim,
+		int power)
+{
+	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
+	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
+
+	switch (power) {
+	case FB_BLANK_POWERDOWN:
+		if (dsim->suspended)
+			return 0;
+
+		if (client_drv && client_drv->suspend)
+			client_drv->suspend(client_dev);
+
+		clk_disable(dsim->clock);
+
+		exynos_mipi_regulator_disable(dsim);
+
+		dsim->suspended = true;
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
+{
+	struct platform_device *pdev = to_platform_device(dsim->dev);
+	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
+	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
+
+	switch (power) {
+	case FB_BLANK_UNBLANK:
+		if (!dsim->suspended)
+			return 0;
+
+		/* lcd panel power on. */
+		if (client_drv && client_drv->power_on)
+			client_drv->power_on(client_dev, 1);
+
+		exynos_mipi_regulator_disable(dsim);
+
+		/* enable MIPI-DSI PHY. */
+		if (dsim->pd->phy_enable)
+			dsim->pd->phy_enable(pdev, true);
+
+		clk_enable(dsim->clock);
+
+		exynos_mipi_update_cfg(dsim);
+
+		/* set lcd panel sequence commands. */
+		if (client_drv && client_drv->set_sequence)
+			client_drv->set_sequence(client_dev);
+
+		dsim->suspended = false;
+
+		break;
+	case FB_BLANK_NORMAL:
+		/* TODO. */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device *lcd_dev)
+{
+	struct mipi_dsim_ddi *dsim_ddi;
+
+	if (!lcd_dev->name) {
+		pr_err("dsim_lcd_device name is NULL.\n");
+		return -EFAULT;
+	}
+
+	dsim_ddi = kzalloc(sizeof(struct mipi_dsim_ddi), GFP_KERNEL);
+	if (!dsim_ddi) {
+		pr_err("failed to allocate dsim_ddi object.\n");
+		return -ENOMEM;
+	}
+
+	dsim_ddi->dsim_lcd_dev = lcd_dev;
+
+	mutex_lock(&mipi_dsim_lock);
+	list_add_tail(&dsim_ddi->list, &dsim_ddi_list);
+	mutex_unlock(&mipi_dsim_lock);
+
+	return 0;
+}
+
+struct mipi_dsim_ddi *exynos_mipi_dsi_find_lcd_device(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+	struct mipi_dsim_ddi *dsim_ddi, *next;
+	struct mipi_dsim_lcd_device *lcd_dev;
+
+	mutex_lock(&mipi_dsim_lock);
+
+	list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+		if (!dsim_ddi)
+			goto out;
+
+		lcd_dev = dsim_ddi->dsim_lcd_dev;
+		if (!lcd_dev)
+			continue;
+
+		if ((strcmp(lcd_drv->name, lcd_dev->name)) == 0) {
+			/**
+			 * bus_id would be used to identify
+			 * connected bus.
+			 */
+			dsim_ddi->bus_id = lcd_dev->bus_id;
+			mutex_unlock(&mipi_dsim_lock);
+
+			return dsim_ddi;
+		}
+
+		list_del(&dsim_ddi->list);
+		kfree(dsim_ddi);
+	}
+
+out:
+	mutex_unlock(&mipi_dsim_lock);
+
+	return NULL;
+}
+
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver *lcd_drv)
+{
+	struct mipi_dsim_ddi *dsim_ddi;
+
+	if (!lcd_drv->name) {
+		pr_err("dsim_lcd_driver name is NULL.\n");
+		return -EFAULT;
+	}
+
+	dsim_ddi = exynos_mipi_dsi_find_lcd_device(lcd_drv);
+	if (!dsim_ddi) {
+		pr_err("mipi_dsim_ddi object not found.\n");
+		return -EFAULT;
+	}
+
+	dsim_ddi->dsim_lcd_drv = lcd_drv;
+
+	pr_info("registered panel driver(%s) to mipi-dsi driver.\n",
+		lcd_drv->name);
+
+	return 0;
+
+}
+
+struct mipi_dsim_ddi *exynos_mipi_dsi_bind_lcd_ddi(struct mipi_dsim_device *dsim,
+						const char *name)
+{
+	struct mipi_dsim_ddi *dsim_ddi, *next;
+	struct mipi_dsim_lcd_driver *lcd_drv;
+	struct mipi_dsim_lcd_device *lcd_dev;
+	int ret;
+
+	mutex_lock(&dsim->lock);
+
+	list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+		lcd_drv = dsim_ddi->dsim_lcd_drv;
+		lcd_dev = dsim_ddi->dsim_lcd_dev;
+		if (!lcd_drv || !lcd_dev ||
+			(dsim->id != dsim_ddi->bus_id))
+				continue;
+
+		dev_dbg(dsim->dev, "lcd_drv->id = %d, lcd_dev->id = %d\n",
+				lcd_drv->id, lcd_dev->id);
+		dev_dbg(dsim->dev, "lcd_dev->bus_id = %d, dsim->id = %d\n",
+				lcd_dev->bus_id, dsim->id);
+
+		if ((strcmp(lcd_drv->name, name) == 0)) {
+			lcd_dev->master = dsim;
+
+			lcd_dev->dev.parent = dsim->dev;
+			dev_set_name(&lcd_dev->dev, "%s", lcd_drv->name);
+
+			ret = device_register(&lcd_dev->dev);
+			if (ret < 0) {
+				dev_err(dsim->dev,
+					"can't register %s, status %d\n",
+					dev_name(&lcd_dev->dev), ret);
+				mutex_unlock(&dsim->lock);
+
+				return NULL;
+			}
+
+			dsim->dsim_lcd_dev = lcd_dev;
+			dsim->dsim_lcd_drv = lcd_drv;
+
+			mutex_unlock(&dsim->lock);
+
+			return dsim_ddi;
+		}
+	}
+
+	mutex_unlock(&dsim->lock);
+
+	return NULL;
+}
+
+/* define MIPI-DSI Master operations. */
+static struct mipi_dsim_master_ops master_ops = {
+	.cmd_read			= exynos_mipi_dsi_rd_data,
+	.cmd_write			= exynos_mipi_dsi_wr_data,
+	.get_dsim_frame_done		= exynos_mipi_dsi_get_frame_done_status,
+	.clear_dsim_frame_done		= exynos_mipi_dsi_clear_frame_done,
+	.set_early_blank_mode		= exynos_mipi_dsi_early_blank_mode,
+	.set_blank_mode			= exynos_mipi_dsi_blank_mode,
+};
+
+static int exynos_mipi_dsi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct mipi_dsim_device *dsim;
+	struct mipi_dsim_config *dsim_config;
+	struct mipi_dsim_platform_data *dsim_pd;
+	struct mipi_dsim_ddi *dsim_ddi;
+	int ret = -EINVAL;
+
+	dsim = kzalloc(sizeof(struct mipi_dsim_device), GFP_KERNEL);
+	if (!dsim) {
+		dev_err(&pdev->dev, "failed to allocate dsim object.\n");
+		return -ENOMEM;
+	}
+
+	dsim->pd = to_dsim_plat(pdev);
+	dsim->dev = &pdev->dev;
+	dsim->id = pdev->id;
+
+	/* get mipi_dsim_platform_data. */
+	dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+	if (dsim_pd == NULL) {
+		dev_err(&pdev->dev, "failed to get platform data for dsim.\n");
+		goto err_clock_get;
+	}
+	/* get mipi_dsim_config. */
+	dsim_config = dsim_pd->dsim_config;
+	if (dsim_config == NULL) {
+		dev_err(&pdev->dev, "failed to get dsim config data.\n");
+		goto err_clock_get;
+	}
+
+	dsim->dsim_config = dsim_config;
+	dsim->master_ops = &master_ops;
+
+	mutex_init(&dsim->lock);
+
+	ret = regulator_bulk_get(&pdev->dev, ARRAY_SIZE(supplies), supplies);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get regulators: %d\n", ret);
+		goto err_clock_get;
+	}
+
+	dsim->clock = clk_get(&pdev->dev, "dsim0");
+	if (IS_ERR(dsim->clock)) {
+		dev_err(&pdev->dev, "failed to get dsim clock source\n");
+		goto err_clock_get;
+	}
+
+	clk_enable(dsim->clock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get io memory region\n");
+		goto err_platform_get;
+	}
+
+	dsim->res = request_mem_region(res->start, resource_size(res),
+					dev_name(&pdev->dev));
+	if (!dsim->res) {
+		dev_err(&pdev->dev, "failed to request io memory region\n");
+		ret = -ENOMEM;
+		goto err_mem_region;
+	}
+
+	dsim->reg_base = ioremap(res->start, resource_size(res));
+	if (!dsim->reg_base) {
+		dev_err(&pdev->dev, "failed to remap io region\n");
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	mutex_init(&dsim->lock);
+
+	/* bind lcd ddi matched with panel name. */
+	dsim_ddi = exynos_mipi_dsi_bind_lcd_ddi(dsim, dsim_pd->lcd_panel_name);
+	if (!dsim_ddi) {
+		dev_err(&pdev->dev, "mipi_dsim_ddi object not found.\n");
+		goto err_bind;
+	}
+
+	dsim->irq = platform_get_irq(pdev, 0);
+	if (dsim->irq < 0) {
+		dev_err(&pdev->dev, "failed to request dsim irq resource\n");
+		ret = -EINVAL;
+		goto err_platform_get_irq;
+	}
+
+	ret = request_irq(dsim->irq, exynos_mipi_dsi_interrupt_handler,
+			IRQF_SHARED, pdev->name, dsim);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to request dsim irq\n");
+		ret = -EINVAL;
+		goto err_bind;
+	}
+
+	init_completion(&dsim_wr_comp);
+	init_completion(&dsim_rd_comp);
+
+	/* enable interrupt */
+	exynos_mipi_dsi_init_interrupt(dsim);
+
+	/* initialize mipi-dsi client(lcd panel). */
+	if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->probe)
+		dsim_ddi->dsim_lcd_drv->probe(dsim_ddi->dsim_lcd_dev);
+
+	/* in case that mipi got enabled at bootloader. */
+	if (dsim_pd->enabled)
+		goto out;
+
+	/* lcd panel power on. */
+	if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->power_on)
+		dsim_ddi->dsim_lcd_drv->power_on(dsim_ddi->dsim_lcd_dev, 1);
+
+	exynos_mipi_regulator_enable(dsim);
+
+	/* enable MIPI-DSI PHY. */
+	if (dsim->pd->phy_enable)
+		dsim->pd->phy_enable(pdev, true);
+
+	exynos_mipi_update_cfg(dsim);
+
+	/* set lcd panel sequence commands. */
+	if (dsim_ddi->dsim_lcd_drv && dsim_ddi->dsim_lcd_drv->set_sequence)
+		dsim_ddi->dsim_lcd_drv->set_sequence(dsim_ddi->dsim_lcd_dev);
+
+	dsim->suspended = false;
+
+out:
+	platform_set_drvdata(pdev, dsim);
+
+	dev_dbg(&pdev->dev, "mipi-dsi driver(%s mode) has been probed.\n",
+		(dsim_config->e_interface == DSIM_COMMAND) ?
+			"CPU" : "RGB");
+
+	return 0;
+
+err_bind:
+	iounmap(dsim->reg_base);
+
+err_ioremap:
+	release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+err_mem_region:
+	release_resource(dsim->res);
+
+err_platform_get:
+	clk_disable(dsim->clock);
+	clk_put(dsim->clock);
+err_clock_get:
+	kfree(dsim);
+
+err_platform_get_irq:
+	return ret;
+}
+
+static int __devexit exynos_mipi_dsi_remove(struct platform_device *pdev)
+{
+	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+	struct mipi_dsim_ddi *dsim_ddi, *next;
+	struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+	iounmap(dsim->reg_base);
+
+	clk_disable(dsim->clock);
+	clk_put(dsim->clock);
+
+	release_resource(dsim->res);
+	release_mem_region(dsim->res->start, resource_size(dsim->res));
+
+	list_for_each_entry_safe(dsim_ddi, next, &dsim_ddi_list, list) {
+		if (dsim_ddi) {
+			if (dsim->id != dsim_ddi->bus_id)
+				continue;
+
+			dsim_lcd_drv = dsim_ddi->dsim_lcd_drv;
+
+			if (dsim_lcd_drv->remove)
+				dsim_lcd_drv->remove(dsim_ddi->dsim_lcd_dev);
+
+			kfree(dsim_ddi);
+		}
+	}
+
+	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+	kfree(dsim);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int exynos_mipi_dsi_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
+	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
+
+	disable_irq(dsim->irq);
+
+	if (dsim->suspended)
+		return 0;
+
+	if (client_drv && client_drv->suspend)
+		client_drv->suspend(client_dev);
+
+	/* enable MIPI-DSI PHY. */
+	if (dsim->pd->phy_enable)
+		dsim->pd->phy_enable(pdev, false);
+
+	clk_disable(dsim->clock);
+
+	exynos_mipi_regulator_disable(dsim);
+
+	dsim->suspended = true;
+
+	return 0;
+}
+
+static int exynos_mipi_dsi_resume(struct platform_device *pdev)
+{
+	struct mipi_dsim_device *dsim = platform_get_drvdata(pdev);
+	struct mipi_dsim_lcd_driver *client_drv = dsim->dsim_lcd_drv;
+	struct mipi_dsim_lcd_device *client_dev = dsim->dsim_lcd_dev;
+
+	enable_irq(dsim->irq);
+
+	if (!dsim->suspended)
+		return 0;
+
+	/* lcd panel power on. */
+	if (client_drv && client_drv->power_on)
+		client_drv->power_on(client_dev, 1);
+
+	exynos_mipi_regulator_enable(dsim);
+
+	/* enable MIPI-DSI PHY. */
+	if (dsim->pd->phy_enable)
+		dsim->pd->phy_enable(pdev, true);
+
+	clk_enable(dsim->clock);
+
+	exynos_mipi_update_cfg(dsim);
+
+	/* set lcd panel sequence commands. */
+	if (client_drv && client_drv->set_sequence)
+		client_drv->set_sequence(client_dev);
+
+	dsim->suspended = false;
+
+	return 0;
+}
+#else
+#define exynos_mipi_dsi_suspend NULL
+#define exynos_mipi_dsi_resume NULL
+#endif
+
+static struct platform_driver exynos_mipi_dsi_driver = {
+	.probe = exynos_mipi_dsi_probe,
+	.remove = __devexit_p(exynos_mipi_dsi_remove),
+	.suspend = exynos_mipi_dsi_suspend,
+	.resume = exynos_mipi_dsi_resume,
+	.driver = {
+		   .name = "exynos-mipi-dsim",
+		   .owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(exynos_mipi_dsi_driver);
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/exynos/exynos_mipi_dsi_common.c
new file mode 100644
index 00000000000..14909c1d383
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi_common.c
@@ -0,0 +1,896 @@
+/* linux/drivers/video/exynos/exynos_mipi_dsi_common.c
+ *
+ * Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#include <video/mipi_display.h>
+#include <video/exynos_mipi_dsim.h>
+
+#include <mach/map.h>
+
+#include "exynos_mipi_dsi_regs.h"
+#include "exynos_mipi_dsi_lowlevel.h"
+#include "exynos_mipi_dsi_common.h"
+
+#define MIPI_FIFO_TIMEOUT	msecs_to_jiffies(250)
+#define MIPI_RX_FIFO_READ_DONE  0x30800002
+#define MIPI_MAX_RX_FIFO        20
+#define MHZ			(1000 * 1000)
+#define FIN_HZ			(24 * MHZ)
+
+#define DFIN_PLL_MIN_HZ		(6 * MHZ)
+#define DFIN_PLL_MAX_HZ		(12 * MHZ)
+
+#define DFVCO_MIN_HZ		(500 * MHZ)
+#define DFVCO_MAX_HZ		(1000 * MHZ)
+
+#define TRY_GET_FIFO_TIMEOUT	(5000 * 2)
+#define TRY_FIFO_CLEAR		(10)
+
+/* MIPI-DSIM status types. */
+enum {
+	DSIM_STATE_INIT,	/* should be initialized. */
+	DSIM_STATE_STOP,	/* CPU and LCDC are LP mode. */
+	DSIM_STATE_HSCLKEN,	/* HS clock was enabled. */
+	DSIM_STATE_ULPS
+};
+
+/* define DSI lane types. */
+enum {
+	DSIM_LANE_CLOCK = (1 << 0),
+	DSIM_LANE_DATA0 = (1 << 1),
+	DSIM_LANE_DATA1 = (1 << 2),
+	DSIM_LANE_DATA2 = (1 << 3),
+	DSIM_LANE_DATA3 = (1 << 4)
+};
+
+static unsigned int dpll_table[15] = {
+	100, 120, 170, 220, 270,
+	320, 390, 450, 510, 560,
+	640, 690, 770, 870, 950
+};
+
+irqreturn_t exynos_mipi_dsi_interrupt_handler(int irq, void *dev_id)
+{
+	unsigned int intsrc = 0;
+	unsigned int intmsk = 0;
+	struct mipi_dsim_device *dsim = NULL;
+
+	dsim = dev_id;
+	if (!dsim) {
+		dev_dbg(dsim->dev, KERN_ERR "%s:error: wrong parameter\n",
+							__func__);
+		return IRQ_HANDLED;
+	}
+
+	intsrc = exynos_mipi_dsi_read_interrupt(dsim);
+	intmsk = exynos_mipi_dsi_read_interrupt_mask(dsim);
+
+	intmsk = ~(intmsk) & intsrc;
+
+	switch (intmsk) {
+	case INTMSK_RX_DONE:
+		complete(&dsim_rd_comp);
+		dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n");
+		break;
+	case INTMSK_FIFO_EMPTY:
+		complete(&dsim_wr_comp);
+		dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n");
+		break;
+	default:
+		break;
+	}
+
+	exynos_mipi_dsi_clear_interrupt(dsim, intmsk);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * write long packet to mipi dsi slave
+ * @dsim: mipi dsim device structure.
+ * @data0: packet data to send.
+ * @data1: size of packet data
+ */
+static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim,
+		const unsigned char *data0, unsigned int data_size)
+{
+	unsigned int data_cnt = 0, payload = 0;
+
+	/* in case that data count is more then 4 */
+	for (data_cnt = 0; data_cnt < data_size; data_cnt += 4) {
+		/*
+		 * after sending 4bytes per one time,
+		 * send remainder data less then 4.
+		 */
+		if ((data_size - data_cnt) < 4) {
+			if ((data_size - data_cnt) == 3) {
+				payload = data0[data_cnt] |
+				    data0[data_cnt + 1] << 8 |
+					data0[data_cnt + 2] << 16;
+			dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n",
+				payload, data0[data_cnt],
+				data0[data_cnt + 1],
+				data0[data_cnt + 2]);
+			} else if ((data_size - data_cnt) == 2) {
+				payload = data0[data_cnt] |
+					data0[data_cnt + 1] << 8;
+			dev_dbg(dsim->dev,
+				"count = 2 payload = %x, %x %x\n", payload,
+				data0[data_cnt],
+				data0[data_cnt + 1]);
+			} else if ((data_size - data_cnt) == 1) {
+				payload = data0[data_cnt];
+			}
+
+			exynos_mipi_dsi_wr_tx_data(dsim, payload);
+		/* send 4bytes per one time. */
+		} else {
+			payload = data0[data_cnt] |
+				data0[data_cnt + 1] << 8 |
+				data0[data_cnt + 2] << 16 |
+				data0[data_cnt + 3] << 24;
+
+			dev_dbg(dsim->dev,
+				"count = 4 payload = %x, %x %x %x %x\n",
+				payload, *(u8 *)(data0 + data_cnt),
+				data0[data_cnt + 1],
+				data0[data_cnt + 2],
+				data0[data_cnt + 3]);
+
+			exynos_mipi_dsi_wr_tx_data(dsim, payload);
+		}
+	}
+}
+
+int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+	const unsigned char *data0, unsigned int data_size)
+{
+	unsigned int check_rx_ack = 0;
+
+	if (dsim->state == DSIM_STATE_ULPS) {
+		dev_err(dsim->dev, "state is ULPS.\n");
+
+		return -EINVAL;
+	}
+
+	/* FIXME!!! why does it need this delay? */
+	msleep(20);
+
+	mutex_lock(&dsim->lock);
+
+	switch (data_id) {
+	/* short packet types of packet types for command. */
+	case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+	case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+		if (check_rx_ack) {
+			/* process response func should be implemented */
+			mutex_unlock(&dsim->lock);
+			return 0;
+		} else {
+			mutex_unlock(&dsim->lock);
+			return -EINVAL;
+		}
+
+	/* general command */
+	case MIPI_DSI_COLOR_MODE_OFF:
+	case MIPI_DSI_COLOR_MODE_ON:
+	case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+	case MIPI_DSI_TURN_ON_PERIPHERAL:
+		exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]);
+		if (check_rx_ack) {
+			/* process response func should be implemented. */
+			mutex_unlock(&dsim->lock);
+			return 0;
+		} else {
+			mutex_unlock(&dsim->lock);
+			return -EINVAL;
+		}
+
+	/* packet types for video data */
+	case MIPI_DSI_V_SYNC_START:
+	case MIPI_DSI_V_SYNC_END:
+	case MIPI_DSI_H_SYNC_START:
+	case MIPI_DSI_H_SYNC_END:
+	case MIPI_DSI_END_OF_TRANSMISSION:
+		mutex_unlock(&dsim->lock);
+		return 0;
+
+	/* long packet type and null packet */
+	case MIPI_DSI_NULL_PACKET:
+	case MIPI_DSI_BLANKING_PACKET:
+		mutex_unlock(&dsim->lock);
+		return 0;
+	case MIPI_DSI_GENERIC_LONG_WRITE:
+	case MIPI_DSI_DCS_LONG_WRITE:
+	{
+		unsigned int size, payload = 0;
+		INIT_COMPLETION(dsim_wr_comp);
+
+		size = data_size * 4;
+
+		/* if data count is less then 4, then send 3bytes data.  */
+		if (data_size < 4) {
+			payload = data0[0] |
+				data0[1] << 8 |
+				data0[2] << 16;
+
+			exynos_mipi_dsi_wr_tx_data(dsim, payload);
+
+			dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n",
+				data_size, payload, data0[0],
+				data0[1], data0[2]);
+
+		/* in case that data count is more then 4 */
+		} else
+			exynos_mipi_dsi_long_data_wr(dsim, data0, data_size);
+
+		/* put data into header fifo */
+		exynos_mipi_dsi_wr_tx_header(dsim, data_id, data_size & 0xff,
+			(data_size & 0xff00) >> 8);
+
+		if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp,
+							MIPI_FIFO_TIMEOUT)) {
+			dev_warn(dsim->dev, "command write timeout.\n");
+			mutex_unlock(&dsim->lock);
+			return -EAGAIN;
+		}
+
+		if (check_rx_ack) {
+			/* process response func should be implemented. */
+			mutex_unlock(&dsim->lock);
+			return 0;
+		} else {
+			mutex_unlock(&dsim->lock);
+			return -EINVAL;
+		}
+	}
+
+	/* packet typo for video data */
+	case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+	case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+	case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+		if (check_rx_ack) {
+			/* process response func should be implemented. */
+			mutex_unlock(&dsim->lock);
+			return 0;
+		} else {
+			mutex_unlock(&dsim->lock);
+			return -EINVAL;
+		}
+	default:
+		dev_warn(dsim->dev,
+			"data id %x is not supported current DSI spec.\n",
+			data_id);
+
+		mutex_unlock(&dsim->lock);
+		return -EINVAL;
+	}
+
+	mutex_unlock(&dsim->lock);
+	return 0;
+}
+
+static unsigned int exynos_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim,
+		unsigned int req_size, unsigned int rx_data, u8 *rx_buf)
+{
+	unsigned int rcv_pkt, i, j;
+	u16 rxsize;
+
+	/* for long packet */
+	rxsize = (u16)((rx_data & 0x00ffff00) >> 8);
+	dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize);
+	if (rxsize != req_size) {
+		dev_dbg(dsim->dev,
+			"received size mismatch received: %d, requested: %d\n",
+			rxsize, req_size);
+		goto err;
+	}
+
+	for (i = 0; i < (rxsize >> 2); i++) {
+		rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim);
+		dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+		for (j = 0; j < 4; j++) {
+			rx_buf[(i * 4) + j] =
+					(u8)(rcv_pkt >> (j * 8)) & 0xff;
+			dev_dbg(dsim->dev, "received value : %02x\n",
+					(rcv_pkt >> (j * 8)) & 0xff);
+		}
+	}
+	if (rxsize % 4) {
+		rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim);
+		dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt);
+		for (j = 0; j < (rxsize % 4); j++) {
+			rx_buf[(i * 4) + j] =
+					(u8)(rcv_pkt >> (j * 8)) & 0xff;
+			dev_dbg(dsim->dev, "received value : %02x\n",
+					(rcv_pkt >> (j * 8)) & 0xff);
+		}
+	}
+
+	return rxsize;
+
+err:
+	return -EINVAL;
+}
+
+static unsigned int exynos_mipi_dsi_response_size(unsigned int req_size)
+{
+	switch (req_size) {
+	case 1:
+		return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE;
+	case 2:
+		return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE;
+	default:
+		return MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE;
+	}
+}
+
+int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+	unsigned int data0, unsigned int req_size, u8 *rx_buf)
+{
+	unsigned int rx_data, rcv_pkt, i;
+	u8 response = 0;
+	u16 rxsize;
+
+	if (dsim->state == DSIM_STATE_ULPS) {
+		dev_err(dsim->dev, "state is ULPS.\n");
+
+		return -EINVAL;
+	}
+
+	/* FIXME!!! */
+	msleep(20);
+
+	mutex_lock(&dsim->lock);
+	INIT_COMPLETION(dsim_rd_comp);
+	exynos_mipi_dsi_rd_tx_header(dsim,
+		MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size);
+
+	response = exynos_mipi_dsi_response_size(req_size);
+
+	switch (data_id) {
+	case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+	case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+	case MIPI_DSI_DCS_READ:
+		exynos_mipi_dsi_rd_tx_header(dsim,
+			data_id, data0);
+		/* process response func should be implemented. */
+		break;
+	default:
+		dev_warn(dsim->dev,
+			"data id %x is not supported current DSI spec.\n",
+			data_id);
+
+		return -EINVAL;
+	}
+
+	if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp,
+				MIPI_FIFO_TIMEOUT)) {
+		pr_err("RX done interrupt timeout\n");
+		mutex_unlock(&dsim->lock);
+		return 0;
+	}
+
+	msleep(20);
+
+	rx_data = exynos_mipi_dsi_rd_rx_fifo(dsim);
+
+	if ((u8)(rx_data & 0xff) != response) {
+		printk(KERN_ERR
+			"mipi dsi wrong response rx_data : %x, response:%x\n",
+			rx_data, response);
+		goto clear_rx_fifo;
+	}
+
+	if (req_size <= 2) {
+		/* for short packet */
+		for (i = 0; i < req_size; i++)
+			rx_buf[i] = (rx_data >> (8 + (i * 8))) & 0xff;
+		rxsize = req_size;
+	} else {
+		/* for long packet */
+		rxsize = exynos_mipi_dsi_long_data_rd(dsim, req_size, rx_data,
+							rx_buf);
+		if (rxsize != req_size)
+			goto clear_rx_fifo;
+	}
+
+	rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim);
+
+	msleep(20);
+
+	if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) {
+		dev_info(dsim->dev,
+			"Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt);
+		goto clear_rx_fifo;
+	}
+
+	mutex_unlock(&dsim->lock);
+
+	return rxsize;
+
+clear_rx_fifo:
+	i = 0;
+	while (1) {
+		rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim);
+		if ((rcv_pkt == MIPI_RX_FIFO_READ_DONE)
+				|| (i > MIPI_MAX_RX_FIFO))
+			break;
+		dev_dbg(dsim->dev,
+				"mipi dsi clear rx fifo : %08x\n", rcv_pkt);
+		i++;
+	}
+	dev_info(dsim->dev,
+		"mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt);
+
+	mutex_unlock(&dsim->lock);
+
+	return 0;
+}
+
+static int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim,
+				unsigned int enable)
+{
+	int sw_timeout;
+
+	if (enable) {
+		sw_timeout = 1000;
+
+		exynos_mipi_dsi_enable_pll(dsim, 1);
+		while (1) {
+			sw_timeout--;
+			if (exynos_mipi_dsi_is_pll_stable(dsim))
+				return 0;
+			if (sw_timeout == 0)
+				return -EINVAL;
+		}
+	} else
+		exynos_mipi_dsi_enable_pll(dsim, 0);
+
+	return 0;
+}
+
+static unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim,
+	unsigned int pre_divider, unsigned int main_divider,
+	unsigned int scaler)
+{
+	unsigned long dfin_pll, dfvco, dpll_out;
+	unsigned int i, freq_band = 0xf;
+
+	dfin_pll = (FIN_HZ / pre_divider);
+
+	/******************************************************
+	 *	Serial Clock(=ByteClk X 8)	FreqBand[3:0] *
+	 ******************************************************
+	 *	~ 99.99 MHz			0000
+	 *	100 ~ 119.99 MHz		0001
+	 *	120 ~ 159.99 MHz		0010
+	 *	160 ~ 199.99 MHz		0011
+	 *	200 ~ 239.99 MHz		0100
+	 *	140 ~ 319.99 MHz		0101
+	 *	320 ~ 389.99 MHz		0110
+	 *	390 ~ 449.99 MHz		0111
+	 *	450 ~ 509.99 MHz		1000
+	 *	510 ~ 559.99 MHz		1001
+	 *	560 ~ 639.99 MHz		1010
+	 *	640 ~ 689.99 MHz		1011
+	 *	690 ~ 769.99 MHz		1100
+	 *	770 ~ 869.99 MHz		1101
+	 *	870 ~ 949.99 MHz		1110
+	 *	950 ~ 1000 MHz			1111
+	 ******************************************************/
+	if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) {
+		dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n");
+		exynos_mipi_dsi_enable_afc(dsim, 0, 0);
+	} else {
+		if (dfin_pll < 7 * MHZ)
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x1);
+		else if (dfin_pll < 8 * MHZ)
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x0);
+		else if (dfin_pll < 9 * MHZ)
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x3);
+		else if (dfin_pll < 10 * MHZ)
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x2);
+		else if (dfin_pll < 11 * MHZ)
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x5);
+		else
+			exynos_mipi_dsi_enable_afc(dsim, 1, 0x4);
+	}
+
+	dfvco = dfin_pll * main_divider;
+	dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n",
+				dfvco, dfin_pll, main_divider);
+	if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ)
+		dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n");
+
+	dpll_out = dfvco / (1 << scaler);
+	dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n",
+		dpll_out, dfvco, scaler);
+
+	for (i = 0; i < ARRAY_SIZE(dpll_table); i++) {
+		if (dpll_out < dpll_table[i] * MHZ) {
+			freq_band = i;
+			break;
+		}
+	}
+
+	dev_dbg(dsim->dev, "freq_band = %d\n", freq_band);
+
+	exynos_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler);
+
+	exynos_mipi_dsi_hs_zero_ctrl(dsim, 0);
+	exynos_mipi_dsi_prep_ctrl(dsim, 0);
+
+	/* Freq Band */
+	exynos_mipi_dsi_pll_freq_band(dsim, freq_band);
+
+	/* Stable time */
+	exynos_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time);
+
+	/* Enable PLL */
+	dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n",
+		(dpll_out / MHZ));
+
+	return dpll_out;
+}
+
+static int exynos_mipi_dsi_set_clock(struct mipi_dsim_device *dsim,
+	unsigned int byte_clk_sel, unsigned int enable)
+{
+	unsigned int esc_div;
+	unsigned long esc_clk_error_rate;
+	unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0;
+
+	if (enable) {
+		dsim->e_clk_src = byte_clk_sel;
+
+		/* Escape mode clock and byte clock source */
+		exynos_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel);
+
+		/* DPHY, DSIM Link : D-PHY clock out */
+		if (byte_clk_sel == DSIM_PLL_OUT_DIV8) {
+			hs_clk = exynos_mipi_dsi_change_pll(dsim,
+				dsim->dsim_config->p, dsim->dsim_config->m,
+				dsim->dsim_config->s);
+			if (hs_clk == 0) {
+				dev_err(dsim->dev,
+					"failed to get hs clock.\n");
+				return -EINVAL;
+			}
+
+			byte_clk = hs_clk / 8;
+			exynos_mipi_dsi_enable_pll_bypass(dsim, 0);
+			exynos_mipi_dsi_pll_on(dsim, 1);
+		/* DPHY : D-PHY clock out, DSIM link : external clock out */
+		} else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) {
+			dev_warn(dsim->dev, "this project is not support\n");
+			dev_warn(dsim->dev,
+				"external clock source for MIPI DSIM.\n");
+		} else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) {
+			dev_warn(dsim->dev, "this project is not support\n");
+			dev_warn(dsim->dev,
+				"external clock source for MIPI DSIM\n");
+		}
+
+		/* escape clock divider */
+		esc_div = byte_clk / (dsim->dsim_config->esc_clk);
+		dev_dbg(dsim->dev,
+			"esc_div = %d, byte_clk = %lu, esc_clk = %lu\n",
+			esc_div, byte_clk, dsim->dsim_config->esc_clk);
+		if ((byte_clk / esc_div) >= (20 * MHZ) ||
+				(byte_clk / esc_div) >
+					dsim->dsim_config->esc_clk)
+			esc_div += 1;
+
+		escape_clk = byte_clk / esc_div;
+		dev_dbg(dsim->dev,
+			"escape_clk = %lu, byte_clk = %lu, esc_div = %d\n",
+			escape_clk, byte_clk, esc_div);
+
+		/* enable escape clock. */
+		exynos_mipi_dsi_enable_byte_clock(dsim, 1);
+
+		/* enable byte clk and escape clock */
+		exynos_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div);
+		/* escape clock on lane */
+		exynos_mipi_dsi_enable_esc_clk_on_lane(dsim,
+			(DSIM_LANE_CLOCK | dsim->data_lane), 1);
+
+		dev_dbg(dsim->dev, "byte clock is %luMHz\n",
+			(byte_clk / MHZ));
+		dev_dbg(dsim->dev, "escape clock that user's need is %lu\n",
+			(dsim->dsim_config->esc_clk / MHZ));
+		dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div);
+		dev_dbg(dsim->dev, "escape clock is %luMHz\n",
+			((byte_clk / esc_div) / MHZ));
+
+		if ((byte_clk / esc_div) > escape_clk) {
+			esc_clk_error_rate = escape_clk /
+				(byte_clk / esc_div);
+			dev_warn(dsim->dev, "error rate is %lu over.\n",
+				(esc_clk_error_rate / 100));
+		} else if ((byte_clk / esc_div) < (escape_clk)) {
+			esc_clk_error_rate = (byte_clk / esc_div) /
+				escape_clk;
+			dev_warn(dsim->dev, "error rate is %lu under.\n",
+				(esc_clk_error_rate / 100));
+		}
+	} else {
+		exynos_mipi_dsi_enable_esc_clk_on_lane(dsim,
+			(DSIM_LANE_CLOCK | dsim->data_lane), 0);
+		exynos_mipi_dsi_set_esc_clk_prs(dsim, 0, 0);
+
+		/* disable escape clock. */
+		exynos_mipi_dsi_enable_byte_clock(dsim, 0);
+
+		if (byte_clk_sel == DSIM_PLL_OUT_DIV8)
+			exynos_mipi_dsi_pll_on(dsim, 0);
+	}
+
+	return 0;
+}
+
+int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim)
+{
+	dsim->state = DSIM_STATE_INIT;
+
+	switch (dsim->dsim_config->e_no_data_lane) {
+	case DSIM_DATA_LANE_1:
+		dsim->data_lane = DSIM_LANE_DATA0;
+		break;
+	case DSIM_DATA_LANE_2:
+		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1;
+		break;
+	case DSIM_DATA_LANE_3:
+		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+			DSIM_LANE_DATA2;
+		break;
+	case DSIM_DATA_LANE_4:
+		dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+			DSIM_LANE_DATA2 | DSIM_LANE_DATA3;
+		break;
+	default:
+		dev_info(dsim->dev, "data lane is invalid.\n");
+		return -EINVAL;
+	};
+
+	exynos_mipi_dsi_sw_reset(dsim);
+	exynos_mipi_dsi_func_reset(dsim);
+
+	exynos_mipi_dsi_dp_dn_swap(dsim, 0);
+
+	return 0;
+}
+
+void exynos_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim)
+{
+	unsigned int src = 0;
+
+	src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE);
+	exynos_mipi_dsi_set_interrupt(dsim, src, 1);
+
+	src = 0;
+	src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY);
+	exynos_mipi_dsi_set_interrupt_mask(dsim, src, 1);
+}
+
+int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+	unsigned int enable)
+{
+	/* enable only frame done interrupt */
+	exynos_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable);
+
+	return 0;
+}
+
+void exynos_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+		unsigned int enable)
+{
+
+	/* consider Main display and Sub display. */
+
+	exynos_mipi_dsi_set_main_stand_by(dsim, enable);
+}
+
+int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+	struct mipi_dsim_config *dsim_config)
+{
+	struct mipi_dsim_platform_data *dsim_pd;
+	struct fb_videomode *timing;
+
+	dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd;
+	timing = (struct fb_videomode *)dsim_pd->lcd_panel_info;
+
+	/* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */
+	if (dsim_config->e_interface == (u32) DSIM_VIDEO) {
+		if (dsim_config->auto_vertical_cnt == 0) {
+			exynos_mipi_dsi_set_main_disp_vporch(dsim,
+				dsim_config->cmd_allow,
+				timing->upper_margin,
+				timing->lower_margin);
+			exynos_mipi_dsi_set_main_disp_hporch(dsim,
+				timing->left_margin,
+				timing->right_margin);
+			exynos_mipi_dsi_set_main_disp_sync_area(dsim,
+				timing->vsync_len,
+				timing->hsync_len);
+		}
+	}
+
+	exynos_mipi_dsi_set_main_disp_resol(dsim, timing->xres,
+			timing->yres);
+
+	exynos_mipi_dsi_display_config(dsim, dsim_config);
+
+	dev_info(dsim->dev, "lcd panel ==> width = %d, height = %d\n",
+			timing->xres, timing->yres);
+
+	return 0;
+}
+
+int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim)
+{
+	unsigned int time_out = 100;
+
+	switch (dsim->state) {
+	case DSIM_STATE_INIT:
+		exynos_mipi_dsi_init_fifo_pointer(dsim, 0x1f);
+
+		/* dsi configuration */
+		exynos_mipi_dsi_init_config(dsim);
+		exynos_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1);
+		exynos_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1);
+
+		/* set clock configuration */
+		exynos_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1);
+
+		/* check clock and data lane state are stop state */
+		while (!(exynos_mipi_dsi_is_lane_state(dsim))) {
+			time_out--;
+			if (time_out == 0) {
+				dev_err(dsim->dev,
+					"DSI Master is not stop state.\n");
+				dev_err(dsim->dev,
+					"Check initialization process\n");
+
+				return -EINVAL;
+			}
+		}
+		if (time_out != 0) {
+			dev_info(dsim->dev,
+				"DSI Master driver has been completed.\n");
+			dev_info(dsim->dev, "DSI Master state is stop state\n");
+		}
+
+		dsim->state = DSIM_STATE_STOP;
+
+		/* BTA sequence counters */
+		exynos_mipi_dsi_set_stop_state_counter(dsim,
+			dsim->dsim_config->stop_holding_cnt);
+		exynos_mipi_dsi_set_bta_timeout(dsim,
+			dsim->dsim_config->bta_timeout);
+		exynos_mipi_dsi_set_lpdr_timeout(dsim,
+			dsim->dsim_config->rx_timeout);
+
+		return 0;
+	default:
+		dev_info(dsim->dev, "DSI Master is already init.\n");
+		return 0;
+	}
+
+	return 0;
+}
+
+int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim)
+{
+	if (dsim->state != DSIM_STATE_STOP) {
+		dev_warn(dsim->dev, "DSIM is not in stop state.\n");
+		return 0;
+	}
+
+	if (dsim->e_clk_src == DSIM_EXT_CLK_BYPASS) {
+		dev_warn(dsim->dev, "clock source is external bypass.\n");
+		return 0;
+	}
+
+	dsim->state = DSIM_STATE_HSCLKEN;
+
+	 /* set LCDC and CPU transfer mode to HS. */
+	exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+	exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+	exynos_mipi_dsi_enable_hs_clock(dsim, 1);
+
+	return 0;
+}
+
+int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+		unsigned int mode)
+{
+	if (mode) {
+		if (dsim->state != DSIM_STATE_HSCLKEN) {
+			dev_err(dsim->dev, "HS Clock lane is not enabled.\n");
+			return -EINVAL;
+		}
+
+		exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0);
+	} else {
+		if (dsim->state == DSIM_STATE_INIT || dsim->state ==
+			DSIM_STATE_ULPS) {
+			dev_err(dsim->dev,
+				"DSI Master is not STOP or HSDT state.\n");
+			return -EINVAL;
+		}
+
+		exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0);
+	}
+
+	return 0;
+}
+
+int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+	return _exynos_mipi_dsi_get_frame_done_status(dsim);
+}
+
+int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+	_exynos_mipi_dsi_clear_frame_done(dsim);
+
+	return 0;
+}
+
+int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+				unsigned int val)
+{
+	int try = TRY_FIFO_CLEAR;
+
+	exynos_mipi_dsi_sw_reset_release(dsim);
+	exynos_mipi_dsi_func_reset(dsim);
+
+	do {
+		if (exynos_mipi_dsi_get_sw_reset_release(dsim)) {
+			exynos_mipi_dsi_init_interrupt(dsim);
+			dev_dbg(dsim->dev, "reset release done.\n");
+			return 0;
+		}
+	} while (--try);
+
+	dev_err(dsim->dev, "failed to clear dsim fifo.\n");
+	return -EAGAIN;
+}
+
+MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.h b/drivers/video/exynos/exynos_mipi_dsi_common.h
new file mode 100644
index 00000000000..412552274df
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi_common.h
@@ -0,0 +1,46 @@
+/* linux/drivers/video/exynos_mipi_dsi_common.h
+ *
+ * Header file for Samsung SoC MIPI-DSI common driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSI_COMMON_H
+#define _EXYNOS_MIPI_DSI_COMMON_H
+
+static DECLARE_COMPLETION(dsim_rd_comp);
+static DECLARE_COMPLETION(dsim_wr_comp);
+
+int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+	const unsigned char *data0, unsigned int data_size);
+int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id,
+	unsigned int data0, unsigned int req_size, u8 *rx_buf);
+irqreturn_t exynos_mipi_dsi_interrupt_handler(int irq, void *dev_id);
+void exynos_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim);
+int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_stand_by(struct mipi_dsim_device *dsim,
+		unsigned int enable);
+int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim,
+			struct mipi_dsim_config *dsim_info);
+int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim);
+int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim);
+int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim,
+		unsigned int mode);
+int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim,
+	unsigned int enable);
+int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+
+extern struct fb_info *registered_fb[FB_MAX] __read_mostly;
+
+int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
+				unsigned int val);
+
+#endif /* _EXYNOS_MIPI_DSI_COMMON_H */
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
new file mode 100644
index 00000000000..0ef38ce72af
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
@@ -0,0 +1,618 @@
+/* linux/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+ *
+ * Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+
+#include <video/exynos_mipi_dsim.h>
+
+#include <mach/map.h>
+
+#include "exynos_mipi_dsi_regs.h"
+
+void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_SWRST);
+
+	reg |= DSIM_FUNCRST;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_SWRST);
+}
+
+void exynos_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_SWRST);
+
+	reg |= DSIM_SWRST;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_SWRST);
+}
+
+void exynos_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC);
+
+	reg |= INTSRC_SW_RST_RELEASE;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC);
+}
+
+int exynos_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim)
+{
+	return (readl(dsim->reg_base + EXYNOS_DSIM_INTSRC)) &
+			INTSRC_SW_RST_RELEASE;
+}
+
+unsigned int exynos_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_INTMSK);
+
+	return reg;
+}
+
+void exynos_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+		unsigned int mode, unsigned int mask)
+{
+	unsigned int reg = 0;
+
+	if (mask)
+		reg |= mode;
+	else
+		reg &= ~mode;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_INTMSK);
+}
+
+void exynos_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+		unsigned int cfg)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_FIFOCTRL);
+
+	writel(reg & ~(cfg), dsim->reg_base + EXYNOS_DSIM_FIFOCTRL);
+	mdelay(10);
+	reg |= cfg;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_FIFOCTRL);
+}
+
+/*
+ * this function set PLL P, M and S value in D-PHY
+ */
+void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+		unsigned int value)
+{
+	writel(DSIM_AFC_CTL(value), dsim->reg_base + EXYNOS_DSIM_PHYACCHR);
+}
+
+void exynos_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+		unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_MDRESOL);
+
+	reg &= ~DSIM_MAIN_STAND_BY;
+
+	if (enable)
+		reg |= DSIM_MAIN_STAND_BY;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL);
+}
+
+void exynos_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+	unsigned int width_resol, unsigned int height_resol)
+{
+	unsigned int reg;
+
+	/* standby should be set after configuration so set to not ready*/
+	reg = (readl(dsim->reg_base + EXYNOS_DSIM_MDRESOL)) &
+		~(DSIM_MAIN_STAND_BY);
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL);
+
+	reg &= ~((0x7ff << 16) | (0x7ff << 0));
+	reg |= DSIM_MAIN_VRESOL(height_resol) | DSIM_MAIN_HRESOL(width_resol);
+
+	reg |= DSIM_MAIN_STAND_BY;
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MDRESOL);
+}
+
+void exynos_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+	unsigned int cmd_allow, unsigned int vfront, unsigned int vback)
+{
+	unsigned int reg;
+
+	reg = (readl(dsim->reg_base + EXYNOS_DSIM_MVPORCH)) &
+		~((DSIM_CMD_ALLOW_MASK) | (DSIM_STABLE_VFP_MASK) |
+		(DSIM_MAIN_VBP_MASK));
+
+	reg |= (DSIM_CMD_ALLOW_SHIFT(cmd_allow & 0xf) |
+		DSIM_STABLE_VFP_SHIFT(vfront & 0x7ff) |
+		DSIM_MAIN_VBP_SHIFT(vback & 0x7ff));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MVPORCH);
+}
+
+void exynos_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+	unsigned int front, unsigned int back)
+{
+	unsigned int reg;
+
+	reg = (readl(dsim->reg_base + EXYNOS_DSIM_MHPORCH)) &
+		~((DSIM_MAIN_HFP_MASK) | (DSIM_MAIN_HBP_MASK));
+
+	reg |= DSIM_MAIN_HFP_SHIFT(front) | DSIM_MAIN_HBP_SHIFT(back);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MHPORCH);
+}
+
+void exynos_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+	unsigned int vert, unsigned int hori)
+{
+	unsigned int reg;
+
+	reg = (readl(dsim->reg_base + EXYNOS_DSIM_MSYNC)) &
+		~((DSIM_MAIN_VSA_MASK) | (DSIM_MAIN_HSA_MASK));
+
+	reg |= (DSIM_MAIN_VSA_SHIFT(vert & 0x3ff) |
+		DSIM_MAIN_HSA_SHIFT(hori));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_MSYNC);
+}
+
+void exynos_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+	unsigned int vert, unsigned int hori)
+{
+	unsigned int reg;
+
+	reg = (readl(dsim->reg_base + EXYNOS_DSIM_SDRESOL)) &
+		~(DSIM_SUB_STANDY_MASK);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL);
+
+	reg &= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK);
+	reg |= (DSIM_SUB_VRESOL_SHIFT(vert & 0x7ff) |
+		DSIM_SUB_HRESOL_SHIFT(hori & 0x7ff));
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL);
+
+	reg |= DSIM_SUB_STANDY_SHIFT(1);
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_SDRESOL);
+}
+
+void exynos_mipi_dsi_init_config(struct mipi_dsim_device *dsim)
+{
+	struct mipi_dsim_config *dsim_config = dsim->dsim_config;
+
+	unsigned int cfg = (readl(dsim->reg_base + EXYNOS_DSIM_CONFIG)) &
+		~((1 << 28) | (0x1f << 20) | (0x3 << 5));
+
+	cfg =	((DSIM_AUTO_FLUSH(dsim_config->auto_flush)) |
+		(DSIM_EOT_DISABLE(dsim_config->eot_disable)) |
+		(DSIM_AUTO_MODE_SHIFT(dsim_config->auto_vertical_cnt)) |
+		(DSIM_HSE_MODE_SHIFT(dsim_config->hse)) |
+		(DSIM_HFP_MODE_SHIFT(dsim_config->hfp)) |
+		(DSIM_HBP_MODE_SHIFT(dsim_config->hbp)) |
+		(DSIM_HSA_MODE_SHIFT(dsim_config->hsa)) |
+		(DSIM_NUM_OF_DATALANE_SHIFT(dsim_config->e_no_data_lane)));
+
+	writel(cfg, dsim->reg_base + EXYNOS_DSIM_CONFIG);
+}
+
+void exynos_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+				struct mipi_dsim_config *dsim_config)
+{
+	u32 reg = (readl(dsim->reg_base + EXYNOS_DSIM_CONFIG)) &
+		~((0x3 << 26) | (1 << 25) | (0x3 << 18) | (0x7 << 12) |
+		(0x3 << 16) | (0x7 << 8));
+
+	if (dsim_config->e_interface == DSIM_VIDEO)
+		reg |= (1 << 25);
+	else if (dsim_config->e_interface == DSIM_COMMAND)
+		reg &= ~(1 << 25);
+	else {
+		dev_err(dsim->dev, "unknown lcd type.\n");
+		return;
+	}
+
+	/* main lcd */
+	reg |= ((u8) (dsim_config->e_burst_mode) & 0x3) << 26 |
+		((u8) (dsim_config->e_virtual_ch) & 0x3) << 18 |
+		((u8) (dsim_config->e_pixel_format) & 0x7) << 12;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CONFIG);
+}
+
+void exynos_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+	unsigned int enable)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_CONFIG);
+
+	if (enable)
+		reg |= DSIM_LANE_ENx(lane);
+	else
+		reg &= ~DSIM_LANE_ENx(lane);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CONFIG);
+}
+
+
+void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+	unsigned int count)
+{
+	unsigned int cfg;
+
+	/* get the data lane number. */
+	cfg = DSIM_NUM_OF_DATALANE_SHIFT(count);
+
+	writel(cfg, dsim->reg_base + EXYNOS_DSIM_CONFIG);
+}
+
+void exynos_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+	unsigned int afc_code)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PHYACCHR);
+
+	if (enable) {
+		reg |= (1 << 14);
+		reg &= ~(0x7 << 5);
+		reg |= (afc_code & 0x7) << 5;
+	} else
+		reg &= ~(1 << 14);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PHYACCHR);
+}
+
+void exynos_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+	unsigned int enable)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) &
+		~(DSIM_PLL_BYPASS_SHIFT(0x1));
+
+	reg |= DSIM_PLL_BYPASS_SHIFT(enable);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+	unsigned int m, unsigned int s)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+
+	reg |= ((p & 0x3f) << 13) | ((m & 0x1ff) << 4) | ((s & 0x7) << 1);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+void exynos_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+		unsigned int freq_band)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) &
+		~(DSIM_FREQ_BAND_SHIFT(0x1f));
+
+	reg |= DSIM_FREQ_BAND_SHIFT(freq_band & 0x1f);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+void exynos_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+		unsigned int pre_divider, unsigned int main_divider,
+		unsigned int scaler)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) &
+		~(0x7ffff << 1);
+
+	reg |= (pre_divider & 0x3f) << 13 | (main_divider & 0x1ff) << 4 |
+		(scaler & 0x7) << 1;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+void exynos_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+	unsigned int lock_time)
+{
+	writel(lock_time, dsim->reg_base + EXYNOS_DSIM_PLLTMR);
+}
+
+void exynos_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim, unsigned int enable)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) &
+		~(DSIM_PLL_EN_SHIFT(0x1));
+
+	reg |= DSIM_PLL_EN_SHIFT(enable & 0x1);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+void exynos_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+		unsigned int src)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) &
+		~(DSIM_BYTE_CLK_SRC_SHIFT(0x3));
+
+	reg |= (DSIM_BYTE_CLK_SRC_SHIFT(src));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+		unsigned int enable)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) &
+		~(DSIM_BYTE_CLKEN_SHIFT(0x1));
+
+	reg |= DSIM_BYTE_CLKEN_SHIFT(enable);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+		unsigned int enable, unsigned int prs_val)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) &
+		~(DSIM_ESC_CLKEN_SHIFT(0x1) | 0xffff);
+
+	reg |= DSIM_ESC_CLKEN_SHIFT(enable);
+	if (enable)
+		reg |= prs_val;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+		unsigned int lane_sel, unsigned int enable)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+
+	if (enable)
+		reg |= DSIM_LANE_ESC_CLKEN(lane_sel);
+	else
+
+		reg &= ~DSIM_LANE_ESC_CLKEN(lane_sel);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+	unsigned int enable)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE)) &
+		~(DSIM_FORCE_STOP_STATE_SHIFT(0x1));
+
+	reg |= (DSIM_FORCE_STOP_STATE_SHIFT(enable & 0x1));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+}
+
+unsigned int exynos_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_STATUS);
+
+	/**
+	 * check clock and data lane states.
+	 * if MIPI-DSI controller was enabled at bootloader then
+	 * TX_READY_HS_CLK is enabled otherwise STOP_STATE_CLK.
+	 * so it should be checked for two case.
+	 */
+	if ((reg & DSIM_STOP_STATE_DAT(0xf)) &&
+			((reg & DSIM_STOP_STATE_CLK) ||
+			 (reg & DSIM_TX_READY_HS_CLK)))
+		return 1;
+
+	return 0;
+}
+
+void exynos_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+		unsigned int cnt_val)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE)) &
+		~(DSIM_STOP_STATE_CNT_SHIFT(0x7ff));
+
+	reg |= (DSIM_STOP_STATE_CNT_SHIFT(cnt_val & 0x7ff));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+}
+
+void exynos_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+		unsigned int timeout)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_TIMEOUT)) &
+		~(DSIM_BTA_TOUT_SHIFT(0xff));
+
+	reg |= (DSIM_BTA_TOUT_SHIFT(timeout));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_TIMEOUT);
+}
+
+void exynos_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+		unsigned int timeout)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_TIMEOUT)) &
+		~(DSIM_LPDR_TOUT_SHIFT(0xffff));
+
+	reg |= (DSIM_LPDR_TOUT_SHIFT(timeout));
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_TIMEOUT);
+}
+
+void exynos_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+		unsigned int lp)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+
+	reg &= ~DSIM_CMD_LPDT_LP;
+
+	if (lp)
+		reg |= DSIM_CMD_LPDT_LP;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+}
+
+void exynos_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+		unsigned int lp)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+
+	reg &= ~DSIM_TX_LPDT_LP;
+
+	if (lp)
+		reg |= DSIM_TX_LPDT_LP;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_ESCMODE);
+}
+
+void exynos_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+		unsigned int enable)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_CLKCTRL)) &
+		~(DSIM_TX_REQUEST_HSCLK_SHIFT(0x1));
+
+	reg |= DSIM_TX_REQUEST_HSCLK_SHIFT(enable);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_CLKCTRL);
+}
+
+void exynos_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+		unsigned int swap_en)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_PHYACCHR1);
+
+	reg &= ~(0x3 << 0);
+	reg |= (swap_en & 0x3) << 0;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PHYACCHR1);
+}
+
+void exynos_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+		unsigned int hs_zero)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) &
+		~(0xf << 28);
+
+	reg |= ((hs_zero & 0xf) << 28);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+void exynos_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep)
+{
+	unsigned int reg = (readl(dsim->reg_base + EXYNOS_DSIM_PLLCTRL)) &
+		~(0x7 << 20);
+
+	reg |= ((prep & 0x7) << 20);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PLLCTRL);
+}
+
+unsigned int exynos_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim)
+{
+	return readl(dsim->reg_base + EXYNOS_DSIM_INTSRC);
+}
+
+void exynos_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+					unsigned int src)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC);
+
+	reg |= src;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC);
+}
+
+void exynos_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+					unsigned int src, unsigned int enable)
+{
+	unsigned int reg = 0;
+
+	if (enable)
+		reg |= src;
+	else
+		reg &= ~src;
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_INTSRC);
+}
+
+unsigned int exynos_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg;
+
+	reg = readl(dsim->reg_base + EXYNOS_DSIM_STATUS);
+
+	return reg & (1 << 31) ? 1 : 0;
+}
+
+unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim)
+{
+	return readl(dsim->reg_base + EXYNOS_DSIM_FIFOCTRL) & ~(0x1f);
+}
+
+void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim,
+	unsigned int di, unsigned int data0, unsigned int data1)
+{
+	unsigned int reg = (data1 << 16) | (data0 << 8) | ((di & 0x3f) << 0);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PKTHDR);
+}
+
+void exynos_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+	unsigned int di, unsigned int data0)
+{
+	unsigned int reg = (data0 << 8) | (di << 0);
+
+	writel(reg, dsim->reg_base + EXYNOS_DSIM_PKTHDR);
+}
+
+unsigned int exynos_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim)
+{
+	return readl(dsim->reg_base + EXYNOS_DSIM_RXFIFO);
+}
+
+unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC);
+
+	return (reg & INTSRC_FRAME_DONE) ? 1 : 0;
+}
+
+void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim)
+{
+	unsigned int reg = readl(dsim->reg_base + EXYNOS_DSIM_INTSRC);
+
+	writel(reg | INTSRC_FRAME_DONE, dsim->reg_base +
+		EXYNOS_DSIM_INTSRC);
+}
+
+void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+		unsigned int tx_data)
+{
+	writel(tx_data, dsim->reg_base + EXYNOS_DSIM_PAYLOAD);
+}
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
new file mode 100644
index 00000000000..85460701c7e
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
@@ -0,0 +1,112 @@
+/* linux/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
+ *
+ * Header file for Samsung SoC MIPI-DSI lowlevel driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSI_LOWLEVEL_H
+#define _EXYNOS_MIPI_DSI_LOWLEVEL_H
+
+void exynos_mipi_dsi_func_reset(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_sw_reset(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_sw_reset_release(struct mipi_dsim_device *dsim);
+int exynos_mipi_dsi_get_sw_reset_release(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_set_interrupt_mask(struct mipi_dsim_device *dsim,
+	unsigned int mode, unsigned int mask);
+void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+					unsigned int count);
+void exynos_mipi_dsi_init_fifo_pointer(struct mipi_dsim_device *dsim,
+					unsigned int cfg);
+void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+				unsigned int value);
+void exynos_mipi_dsi_set_phy_tunning(struct mipi_dsim_device *dsim,
+				unsigned int value);
+void exynos_mipi_dsi_set_main_stand_by(struct mipi_dsim_device *dsim,
+		unsigned int enable);
+void exynos_mipi_dsi_set_main_disp_resol(struct mipi_dsim_device *dsim,
+		unsigned int width_resol, unsigned int height_resol);
+void exynos_mipi_dsi_set_main_disp_vporch(struct mipi_dsim_device *dsim,
+	unsigned int cmd_allow, unsigned int vfront, unsigned int vback);
+void exynos_mipi_dsi_set_main_disp_hporch(struct mipi_dsim_device *dsim,
+			unsigned int front, unsigned int back);
+void exynos_mipi_dsi_set_main_disp_sync_area(struct mipi_dsim_device *dsim,
+				unsigned int vert, unsigned int hori);
+void exynos_mipi_dsi_set_sub_disp_resol(struct mipi_dsim_device *dsim,
+				unsigned int vert, unsigned int hori);
+void exynos_mipi_dsi_init_config(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_display_config(struct mipi_dsim_device *dsim,
+				struct mipi_dsim_config *dsim_config);
+void exynos_mipi_dsi_set_data_lane_number(struct mipi_dsim_device *dsim,
+				unsigned int count);
+void exynos_mipi_dsi_enable_lane(struct mipi_dsim_device *dsim, unsigned int lane,
+				unsigned int enable);
+void exynos_mipi_dsi_enable_afc(struct mipi_dsim_device *dsim, unsigned int enable,
+				unsigned int afc_code);
+void exynos_mipi_dsi_enable_pll_bypass(struct mipi_dsim_device *dsim,
+				unsigned int enable);
+void exynos_mipi_dsi_set_pll_pms(struct mipi_dsim_device *dsim, unsigned int p,
+				unsigned int m, unsigned int s);
+void exynos_mipi_dsi_pll_freq_band(struct mipi_dsim_device *dsim,
+				unsigned int freq_band);
+void exynos_mipi_dsi_pll_freq(struct mipi_dsim_device *dsim,
+			unsigned int pre_divider, unsigned int main_divider,
+			unsigned int scaler);
+void exynos_mipi_dsi_pll_stable_time(struct mipi_dsim_device *dsim,
+			unsigned int lock_time);
+void exynos_mipi_dsi_enable_pll(struct mipi_dsim_device *dsim,
+					unsigned int enable);
+void exynos_mipi_dsi_set_byte_clock_src(struct mipi_dsim_device *dsim,
+					unsigned int src);
+void exynos_mipi_dsi_enable_byte_clock(struct mipi_dsim_device *dsim,
+					unsigned int enable);
+void exynos_mipi_dsi_set_esc_clk_prs(struct mipi_dsim_device *dsim,
+				unsigned int enable, unsigned int prs_val);
+void exynos_mipi_dsi_enable_esc_clk_on_lane(struct mipi_dsim_device *dsim,
+				unsigned int lane_sel, unsigned int enable);
+void exynos_mipi_dsi_force_dphy_stop_state(struct mipi_dsim_device *dsim,
+				unsigned int enable);
+unsigned int exynos_mipi_dsi_is_lane_state(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_set_stop_state_counter(struct mipi_dsim_device *dsim,
+				unsigned int cnt_val);
+void exynos_mipi_dsi_set_bta_timeout(struct mipi_dsim_device *dsim,
+				unsigned int timeout);
+void exynos_mipi_dsi_set_lpdr_timeout(struct mipi_dsim_device *dsim,
+				unsigned int timeout);
+void exynos_mipi_dsi_set_lcdc_transfer_mode(struct mipi_dsim_device *dsim,
+					unsigned int lp);
+void exynos_mipi_dsi_set_cpu_transfer_mode(struct mipi_dsim_device *dsim,
+					unsigned int lp);
+void exynos_mipi_dsi_enable_hs_clock(struct mipi_dsim_device *dsim,
+				unsigned int enable);
+void exynos_mipi_dsi_dp_dn_swap(struct mipi_dsim_device *dsim,
+				unsigned int swap_en);
+void exynos_mipi_dsi_hs_zero_ctrl(struct mipi_dsim_device *dsim,
+				unsigned int hs_zero);
+void exynos_mipi_dsi_prep_ctrl(struct mipi_dsim_device *dsim, unsigned int prep);
+unsigned int exynos_mipi_dsi_read_interrupt(struct mipi_dsim_device *dsim);
+unsigned int exynos_mipi_dsi_read_interrupt_mask(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_clear_interrupt(struct mipi_dsim_device *dsim,
+					unsigned int src);
+void exynos_mipi_dsi_set_interrupt(struct mipi_dsim_device *dsim,
+					unsigned int src, unsigned int enable);
+unsigned int exynos_mipi_dsi_is_pll_stable(struct mipi_dsim_device *dsim);
+unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim);
+unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim);
+void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim);
+void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, unsigned int di,
+				unsigned int data0, unsigned int data1);
+void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim,
+		unsigned int tx_data);
+void exynos_mipi_dsi_rd_tx_header(struct mipi_dsim_device *dsim,
+		unsigned int data0, unsigned int data1);
+unsigned int exynos_mipi_dsi_rd_rx_fifo(struct mipi_dsim_device *dsim);
+
+#endif /* _EXYNOS_MIPI_DSI_LOWLEVEL_H */
diff --git a/drivers/video/exynos/exynos_mipi_dsi_regs.h b/drivers/video/exynos/exynos_mipi_dsi_regs.h
new file mode 100644
index 00000000000..4227106d3fd
--- /dev/null
+++ b/drivers/video/exynos/exynos_mipi_dsi_regs.h
@@ -0,0 +1,149 @@
+/* linux/driver/video/exynos/exynos_mipi_dsi_regs.h
+ *
+ * Register definition file for Samsung MIPI-DSIM driver
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSI_REGS_H
+#define _EXYNOS_MIPI_DSI_REGS_H
+
+#define EXYNOS_DSIM_STATUS		0x0	/* Status register */
+#define EXYNOS_DSIM_SWRST		0x4	/* Software reset register */
+#define EXYNOS_DSIM_CLKCTRL		0x8	/* Clock control register */
+#define EXYNOS_DSIM_TIMEOUT		0xc	/* Time out register */
+#define EXYNOS_DSIM_CONFIG		0x10	/* Configuration register */
+#define EXYNOS_DSIM_ESCMODE		0x14	/* Escape mode register */
+
+/* Main display image resolution register */
+#define EXYNOS_DSIM_MDRESOL		0x18
+#define EXYNOS_DSIM_MVPORCH		0x1c	/* Main display Vporch register */
+#define EXYNOS_DSIM_MHPORCH		0x20	/* Main display Hporch register */
+#define EXYNOS_DSIM_MSYNC		0x24	/* Main display sync area register */
+
+/* Sub display image resolution register */
+#define EXYNOS_DSIM_SDRESOL		0x28
+#define EXYNOS_DSIM_INTSRC		0x2c	/* Interrupt source register */
+#define EXYNOS_DSIM_INTMSK		0x30	/* Interrupt mask register */
+#define EXYNOS_DSIM_PKTHDR		0x34	/* Packet Header FIFO register */
+#define EXYNOS_DSIM_PAYLOAD		0x38	/* Payload FIFO register */
+#define EXYNOS_DSIM_RXFIFO		0x3c	/* Read FIFO register */
+#define EXYNOS_DSIM_FIFOTHLD		0x40	/* FIFO threshold level register */
+#define EXYNOS_DSIM_FIFOCTRL		0x44	/* FIFO status and control register */
+
+/* FIFO memory AC characteristic register */
+#define EXYNOS_DSIM_PLLCTRL		0x4c	/* PLL control register */
+#define EXYNOS_DSIM_PLLTMR		0x50	/* PLL timer register */
+#define EXYNOS_DSIM_PHYACCHR		0x54	/* D-PHY AC characteristic register */
+#define EXYNOS_DSIM_PHYACCHR1		0x58	/* D-PHY AC characteristic register1 */
+
+/* DSIM_STATUS */
+#define DSIM_STOP_STATE_DAT(x)		(((x) & 0xf) << 0)
+#define DSIM_STOP_STATE_CLK		(1 << 8)
+#define DSIM_TX_READY_HS_CLK		(1 << 10)
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST			(1 << 16)
+#define DSIM_SWRST			(1 << 0)
+
+/* EXYNOS_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT(x)		((x) << 0)
+#define DSIM_BTA_TOUT_SHIFT(x)		((x) << 16)
+
+/* EXYNOS_DSIM_CLKCTRL */
+#define DSIM_LANE_ESC_CLKEN(x)		(((x) & 0x1f) << 19)
+#define DSIM_BYTE_CLKEN_SHIFT(x)	((x) << 24)
+#define DSIM_BYTE_CLK_SRC_SHIFT(x)	((x) <<	25)
+#define DSIM_PLL_BYPASS_SHIFT(x)	((x) <<	27)
+#define DSIM_ESC_CLKEN_SHIFT(x)		((x) << 28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT(x)	((x) << 31)
+
+/* EXYNOS_DSIM_CONFIG */
+#define DSIM_LANE_ENx(x)		(((x) & 0x1f) << 0)
+#define DSIM_NUM_OF_DATALANE_SHIFT(x)	((x) << 5)
+#define DSIM_HSA_MODE_SHIFT(x)		((x) << 20)
+#define DSIM_HBP_MODE_SHIFT(x)		((x) << 21)
+#define DSIM_HFP_MODE_SHIFT(x)		((x) << 22)
+#define DSIM_HSE_MODE_SHIFT(x)		((x) << 23)
+#define DSIM_AUTO_MODE_SHIFT(x)		((x) << 24)
+#define DSIM_EOT_DISABLE(x)		((x) << 28)
+#define DSIM_AUTO_FLUSH(x)		((x) << 29)
+
+#define DSIM_NUM_OF_DATA_LANE(x)	((x) << DSIM_NUM_OF_DATALANE_SHIFT)
+
+/* EXYNOS_DSIM_ESCMODE */
+#define DSIM_TX_LPDT_LP			(1 << 6)
+#define DSIM_CMD_LPDT_LP		(1 << 7)
+#define DSIM_FORCE_STOP_STATE_SHIFT(x)	((x) << 20)
+#define DSIM_STOP_STATE_CNT_SHIFT(x)	((x) << 21)
+
+/* EXYNOS_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY		(1 << 31)
+#define DSIM_MAIN_VRESOL(x)		(((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x)		(((x) & 0X7ff) << 0)
+
+/* EXYNOS_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT(x)		((x) << 28)
+#define DSIM_STABLE_VFP_SHIFT(x)	((x) << 16)
+#define DSIM_MAIN_VBP_SHIFT(x)		((x) << 0)
+#define DSIM_CMD_ALLOW_MASK		(0xf << 28)
+#define DSIM_STABLE_VFP_MASK		(0x7ff << 16)
+#define DSIM_MAIN_VBP_MASK		(0x7ff << 0)
+
+/* EXYNOS_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT(x)		((x) << 16)
+#define DSIM_MAIN_HBP_SHIFT(x)		((x) << 0)
+#define DSIM_MAIN_HFP_MASK		((0xffff) << 16)
+#define DSIM_MAIN_HBP_MASK		((0xffff) << 0)
+
+/* EXYNOS_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT(x)		((x) << 22)
+#define DSIM_MAIN_HSA_SHIFT(x)		((x) << 0)
+#define DSIM_MAIN_VSA_MASK		((0x3ff) << 22)
+#define DSIM_MAIN_HSA_MASK		((0xffff) << 0)
+
+/* EXYNOS_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT(x)	((x) << 31)
+#define DSIM_SUB_VRESOL_SHIFT(x)	((x) << 16)
+#define DSIM_SUB_HRESOL_SHIFT(x)	((x) << 0)
+#define DSIM_SUB_STANDY_MASK		((0x1) << 31)
+#define DSIM_SUB_VRESOL_MASK		((0x7ff) << 16)
+#define DSIM_SUB_HRESOL_MASK		((0x7ff) << 0)
+
+/* EXYNOS_DSIM_INTSRC */
+#define INTSRC_PLL_STABLE		(1 << 31)
+#define INTSRC_SW_RST_RELEASE		(1 << 30)
+#define INTSRC_SFR_FIFO_EMPTY		(1 << 29)
+#define INTSRC_FRAME_DONE		(1 << 24)
+#define INTSRC_RX_DATA_DONE		(1 << 18)
+
+/* EXYNOS_DSIM_INTMSK */
+#define INTMSK_FIFO_EMPTY		(1 << 29)
+#define INTMSK_BTA			(1 << 25)
+#define INTMSK_FRAME_DONE		(1 << 24)
+#define INTMSK_RX_TIMEOUT		(1 << 21)
+#define INTMSK_BTA_TIMEOUT		(1 << 20)
+#define INTMSK_RX_DONE			(1 << 18)
+#define INTMSK_RX_TE			(1 << 17)
+#define INTMSK_RX_ACK			(1 << 16)
+#define INTMSK_RX_ECC_ERR		(1 << 15)
+#define INTMSK_RX_CRC_ERR		(1 << 14)
+
+/* EXYNOS_DSIM_FIFOCTRL */
+#define SFR_HEADER_EMPTY		(1 << 22)
+
+/* EXYNOS_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x)			(((x) & 0x7) << 5)
+
+/* EXYNOS_DSIM_PLLCTRL */
+#define DSIM_PLL_EN_SHIFT(x)		((x) << 23)
+#define DSIM_FREQ_BAND_SHIFT(x)		((x) << 24)
+
+#endif /* _EXYNOS_MIPI_DSI_REGS_H */
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
new file mode 100644
index 00000000000..772c770535f
--- /dev/null
+++ b/include/video/exynos_mipi_dsim.h
@@ -0,0 +1,359 @@
+/* include/video/exynos_mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSIM_H
+#define _EXYNOS_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE		(32)
+
+/*
+ * Enumerate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ *	for main display and CPU Interface(same as I80 Interface) for main
+ *	and sub display.
+ */
+enum mipi_dsim_interface_type {
+	DSIM_COMMAND,
+	DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+	DSIM_VIRTUAL_CH_0,
+	DSIM_VIRTUAL_CH_1,
+	DSIM_VIRTUAL_CH_2,
+	DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+	DSIM_NON_BURST_SYNC_EVENT,
+	DSIM_BURST_SYNC_EVENT,
+	DSIM_NON_BURST_SYNC_PULSE,
+	DSIM_BURST,
+	DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+	DSIM_DATA_LANE_1,
+	DSIM_DATA_LANE_2,
+	DSIM_DATA_LANE_3,
+	DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+	DSIM_PLL_OUT_DIV8,
+	DSIM_EXT_CLK_DIV8,
+	DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+	DSIM_CMD_3BPP,
+	DSIM_CMD_8BPP,
+	DSIM_CMD_12BPP,
+	DSIM_CMD_16BPP,
+	DSIM_VID_16BPP_565,
+	DSIM_VID_18BPP_666PACKED,
+	DSIM_18BPP_666LOOSELYPACKED,
+	DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ *	in Video mode, the vertical line transition uses line counter
+ *	configured by VSA, VBP, and Vertical resolution.
+ *	If this bit is set to '1', the line counter does not use VSA and VBP
+ *	registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ *	In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ *	start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ *	this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ *	(in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ *	if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ *	if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ *	if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ *	(in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ *	transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ *	sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ *	in Non-burst mode, RGB data area is filled with RGB data and NULL
+ *	packets, according to input bandwidth of RGB interface.
+ *	In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ *	DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ *	clock(System clock cycle base)
+ *	if the timer value goes to 0x00000000, the clock stable bit of status
+ *	and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ *	prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ *	read packet(or write "set_tear_on" command) and BTA request.
+ *	after transmitting read packet or write "set_tear_on" command,
+ *	BTA requests to D-PHY automatically. this counter value specifies
+ *	the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ *	this register specifies time out from BTA request to change
+ *	the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ *	this register specifies time out on how long RxValid deasserts,
+ *	after RxLpdt asserts with respect to Tx escape clock.
+ *	- RxValid specifies Rx data valid indicator.
+ *	- RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ *	- RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+	unsigned char			auto_flush;
+	unsigned char			eot_disable;
+
+	unsigned char			auto_vertical_cnt;
+	unsigned char			hse;
+	unsigned char			hfp;
+	unsigned char			hbp;
+	unsigned char			hsa;
+	unsigned char			cmd_allow;
+
+	enum mipi_dsim_interface_type	e_interface;
+	enum mipi_dsim_virtual_ch_no	e_virtual_ch;
+	enum mipi_dsim_pixel_format	e_pixel_format;
+	enum mipi_dsim_burst_mode_type	e_burst_mode;
+	enum mipi_dsim_no_of_data_lane	e_no_data_lane;
+	enum mipi_dsim_byte_clk_src	e_byte_clk;
+
+	/*
+	 * ===========================================
+	 * |    P    |    M    |    S    |    MHz    |
+	 * -------------------------------------------
+	 * |    3    |   100   |    3    |    100    |
+	 * |    3    |   100   |    2    |    200    |
+	 * |    3    |    63   |    1    |    252    |
+	 * |    4    |   100   |    1    |    300    |
+	 * |    4    |   110   |    1    |    330    |
+	 * |   12    |   350   |    1    |    350    |
+	 * |    3    |   100   |    1    |    400    |
+	 * |    4    |   150   |    1    |    450    |
+	 * |    6    |   118   |    1    |    472    |
+	 * |	3    |   120   |    1    |    480    |
+	 * |   12    |   250   |    0    |    500    |
+	 * |    4    |   100   |    0    |    600    |
+	 * |    3    |    81   |    0    |    648    |
+	 * |    3    |    88   |    0    |    704    |
+	 * |    3    |    90   |    0    |    720    |
+	 * |    3    |   100   |    0    |    800    |
+	 * |   12    |   425   |    0    |    850    |
+	 * |    4    |   150   |    0    |    900    |
+	 * |   12    |   475   |    0    |    950    |
+	 * |    6    |   250   |    0    |   1000    |
+	 * -------------------------------------------
+	 */
+
+	/*
+	 * pms could be calculated as the following.
+	 * M * 24 / P * 2 ^ S = MHz
+	 */
+	unsigned char			p;
+	unsigned short			m;
+	unsigned char			s;
+
+	unsigned int			pll_stable_time;
+	unsigned long			esc_clk;
+
+	unsigned short			stop_holding_cnt;
+	unsigned char			bta_timeout;
+	unsigned short			rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ *	(virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ *	(it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ *	(it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @state: specifies status of MIPI-DSI controller.
+ *	the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ *	this variable would be set by driver according to e_no_data_lane
+ *	automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ */
+struct mipi_dsim_device {
+	struct device			*dev;
+	int				id;
+	struct resource			*res;
+	struct clk			*clock;
+	unsigned int			irq;
+	void __iomem			*reg_base;
+	struct mutex			lock;
+
+	struct mipi_dsim_config		*dsim_config;
+	struct mipi_dsim_master_ops	*master_ops;
+	struct mipi_dsim_lcd_device	*dsim_lcd_dev;
+	struct mipi_dsim_lcd_driver	*dsim_lcd_drv;
+
+	unsigned int			state;
+	unsigned int			data_lane;
+	unsigned int			e_clk_src;
+	bool				suspended;
+
+	struct mipi_dsim_platform_data	*pd;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ *	for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ *	lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ *	this structure specifies width, height, timing and polarity and so on.
+ * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ */
+struct mipi_dsim_platform_data {
+	char				lcd_panel_name[PANEL_NAME_SIZE];
+
+	struct mipi_dsim_config		*dsim_config;
+	unsigned int			enabled;
+	void				*lcd_panel_info;
+
+	int (*phy_enable)(struct platform_device *pdev, bool on);
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ *	transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ *	- this one would be used only in case of CPU mode.
+ *  @set_early_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called prior to fb_blank() by a client driver
+ *	only if needing.
+ *  @set_blank_mode: set framebuffer blank mode.
+ *	- this callback should be called after fb_blank() by a client driver
+ *	only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+	int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		const unsigned char *data0, unsigned int data1);
+	int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+		unsigned int data0, unsigned int req_size, u8 *rx_buf);
+	int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+	int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+	int (*get_fb_frame_done)(struct fb_info *info);
+	void (*trigger)(struct fb_info *info);
+	int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+	int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ *	alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ *	and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ *	lcd panel module is completed.
+ *	this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+	char			*name;
+	struct device		dev;
+	int			id;
+	int			bus_id;
+	int			irq;
+
+	struct mipi_dsim_device *master;
+	void			*platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ *	alias for that name.
+ * @id: id of driver to be registered.
+ *	this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+	char			*name;
+	int			id;
+
+	void	(*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+	void	(*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+	void	(*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+	int	(*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+						*lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+						*lcd_drv);
+#endif /* _EXYNOS_MIPI_DSIM_H */
-- 
cgit v1.2.3-70-g09d2


From 9befe40f6e018e508b047eb76d189ede9b4ff03d Mon Sep 17 00:00:00 2001
From: Donghwa Lee <dh09.lee@samsung.com>
Date: Wed, 8 Feb 2012 12:47:39 -0800
Subject: video: backlight: support s6e8ax0 panel driver based on MIPI DSI

An moled panel driver based MIPI DSI interface.  S6E8AX0 means it may
includes many other ldi controllers, for example, S6E8AA0, S6E8AB0, and so
on.

This patch can be modified depending on each panel properites.  For
example, second parameter of panel condition register can be changed
depending on ldi controller or amoled type.

[akpm@linux-foundation.org: fix Kconfig syntax error]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/exynos/Kconfig   |  10 +-
 drivers/video/exynos/Makefile  |   1 +
 drivers/video/exynos/s6e8ax0.c | 898 +++++++++++++++++++++++++++++++++++++++++
 drivers/video/exynos/s6e8ax0.h |  21 +
 4 files changed, 929 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/exynos/s6e8ax0.c
 create mode 100644 drivers/video/exynos/s6e8ax0.h

(limited to 'drivers/video')

diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index 645b8a59719..7032ad9f3fb 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -15,8 +15,16 @@ if EXYNOS_VIDEO
 
 config EXYNOS_MIPI_DSI
 	bool "EXYNOS MIPI DSI driver support."
-	depends on (ARCH_S5PV210 || ARCH_EXYNOS)
+	depends on ARCH_S5PV210 || ARCH_EXYNOS
 	help
 	  This enables support for MIPI-DSI device.
 
+config EXYNOS_LCD_S6E8AX0
+	bool "S6E8AX0 MIPI AMOLED LCD Driver"
+	depends on (EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE)
+	default n
+	help
+	  If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
+	  LCD control driver.
+
 endif # EXYNOS_VIDEO
diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile
index a1ae82abd6b..b5b1bd228ab 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/exynos/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_EXYNOS_MIPI_DSI)		+= exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
 				     	exynos_mipi_dsi_lowlevel.o
+obj-$(CONFIG_EXYNOS_LCD_S6E8AX0)	+= s6e8ax0.o
diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/exynos/s6e8ax0.c
new file mode 100644
index 00000000000..4aa9ac6218b
--- /dev/null
+++ b/drivers/video/exynos/s6e8ax0.c
@@ -0,0 +1,898 @@
+/* linux/drivers/video/exynos/s6e8ax0.c
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED lcd 4.65 inch panel driver.
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee, <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/lcd.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+#include <video/exynos_mipi_dsim.h>
+
+#define LDI_MTP_LENGTH		24
+#define DSIM_PM_STABLE_TIME	10
+#define MIN_BRIGHTNESS		0
+#define MAX_BRIGHTNESS		24
+#define GAMMA_TABLE_COUNT	26
+
+#define POWER_IS_ON(pwr)	((pwr) == FB_BLANK_UNBLANK)
+#define POWER_IS_OFF(pwr)	((pwr) == FB_BLANK_POWERDOWN)
+#define POWER_IS_NRM(pwr)	((pwr) == FB_BLANK_NORMAL)
+
+#define lcd_to_master(a)	(a->dsim_dev->master)
+#define lcd_to_master_ops(a)	((lcd_to_master(a))->master_ops)
+
+enum {
+	DSIM_NONE_STATE = 0,
+	DSIM_RESUME_COMPLETE = 1,
+	DSIM_FRAME_DONE = 2,
+};
+
+struct s6e8ax0 {
+	struct device	*dev;
+	unsigned int			power;
+	unsigned int			id;
+	unsigned int			gamma;
+	unsigned int			acl_enable;
+	unsigned int			cur_acl;
+
+	struct lcd_device	*ld;
+	struct backlight_device	*bd;
+
+	struct mipi_dsim_lcd_device	*dsim_dev;
+	struct lcd_platform_data	*ddi_pd;
+	struct mutex			lock;
+	bool  enabled;
+};
+
+
+static struct regulator_bulk_data supplies[] = {
+	{ .supply = "vdd3", },
+	{ .supply = "vci", },
+};
+
+static void s6e8ax0_regulator_enable(struct s6e8ax0 *lcd)
+{
+	int ret = 0;
+	struct lcd_platform_data *pd = NULL;
+
+	pd = lcd->ddi_pd;
+	mutex_lock(&lcd->lock);
+	if (!lcd->enabled) {
+		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
+		if (ret)
+			goto out;
+
+		lcd->enabled = true;
+	}
+	msleep(pd->power_on_delay);
+out:
+	mutex_unlock(&lcd->lock);
+}
+
+static void s6e8ax0_regulator_disable(struct s6e8ax0 *lcd)
+{
+	int ret = 0;
+
+	mutex_lock(&lcd->lock);
+	if (lcd->enabled) {
+		ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
+		if (ret)
+			goto out;
+
+		lcd->enabled = false;
+	}
+out:
+	mutex_unlock(&lcd->lock);
+}
+
+static const unsigned char s6e8ax0_22_gamma_30[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xf5, 0x00, 0xff, 0xad, 0xaf,
+	0xbA, 0xc3, 0xd8, 0xc5, 0x9f, 0xc6, 0x9e, 0xc1, 0xdc, 0xc0,
+	0x00, 0x61, 0x00, 0x5a, 0x00, 0x74,
+};
+
+static const unsigned char s6e8ax0_22_gamma_50[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xe8, 0x1f, 0xf7, 0xad, 0xc0,
+	0xb5, 0xc4, 0xdc, 0xc4, 0x9e, 0xc6, 0x9c, 0xbb, 0xd8, 0xbb,
+	0x00, 0x70, 0x00, 0x68, 0x00, 0x86,
+};
+
+static const unsigned char s6e8ax0_22_gamma_60[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xde, 0x1f, 0xef, 0xad, 0xc4,
+	0xb3, 0xc3, 0xdd, 0xc4, 0x9e, 0xc6, 0x9c, 0xbc, 0xd6, 0xba,
+	0x00, 0x75, 0x00, 0x6e, 0x00, 0x8d,
+};
+
+static const unsigned char s6e8ax0_22_gamma_70[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xd8, 0x1f, 0xe7, 0xaf, 0xc8,
+	0xb4, 0xc4, 0xdd, 0xc3, 0x9d, 0xc6, 0x9c, 0xbb, 0xd6, 0xb9,
+	0x00, 0x7a, 0x00, 0x72, 0x00, 0x93,
+};
+
+static const unsigned char s6e8ax0_22_gamma_80[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xc9, 0x1f, 0xde, 0xae, 0xc9,
+	0xb1, 0xc3, 0xdd, 0xc2, 0x9d, 0xc5, 0x9b, 0xbc, 0xd6, 0xbb,
+	0x00, 0x7f, 0x00, 0x77, 0x00, 0x99,
+};
+
+static const unsigned char s6e8ax0_22_gamma_90[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xc7, 0x1f, 0xd9, 0xb0, 0xcc,
+	0xb2, 0xc3, 0xdc, 0xc1, 0x9c, 0xc6, 0x9c, 0xbc, 0xd4, 0xb9,
+	0x00, 0x83, 0x00, 0x7b, 0x00, 0x9e,
+};
+
+static const unsigned char s6e8ax0_22_gamma_100[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xbd, 0x80, 0xcd, 0xba, 0xce,
+	0xb3, 0xc4, 0xde, 0xc3, 0x9c, 0xc4, 0x9, 0xb8, 0xd3, 0xb6,
+	0x00, 0x88, 0x00, 0x80, 0x00, 0xa5,
+};
+
+static const unsigned char s6e8ax0_22_gamma_120[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb9, 0x95, 0xc8, 0xb1, 0xcf,
+	0xb2, 0xc6, 0xdf, 0xc5, 0x9b, 0xc3, 0x99, 0xb6, 0xd2, 0xb6,
+	0x00, 0x8f, 0x00, 0x86, 0x00, 0xac,
+};
+
+static const unsigned char s6e8ax0_22_gamma_130[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb7, 0xa0, 0xc7, 0xb1, 0xd0,
+	0xb2, 0xc4, 0xdd, 0xc3, 0x9a, 0xc3, 0x98, 0xb6, 0xd0, 0xb4,
+	0x00, 0x92, 0x00, 0x8a, 0x00, 0xb1,
+};
+
+static const unsigned char s6e8ax0_22_gamma_140[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb7, 0xa0, 0xc5, 0xb2, 0xd0,
+	0xb3, 0xc3, 0xde, 0xc3, 0x9b, 0xc2, 0x98, 0xb6, 0xd0, 0xb4,
+	0x00, 0x95, 0x00, 0x8d, 0x00, 0xb5,
+};
+
+static const unsigned char s6e8ax0_22_gamma_150[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xa0, 0xc2, 0xb2, 0xd0,
+	0xb2, 0xc1, 0xdd, 0xc2, 0x9b, 0xc2, 0x98, 0xb4, 0xcf, 0xb1,
+	0x00, 0x99, 0x00, 0x90, 0x00, 0xba,
+};
+
+static const unsigned char s6e8ax0_22_gamma_160[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xa5, 0xbf, 0xb0, 0xd0,
+	0xb1, 0xc3, 0xde, 0xc2, 0x99, 0xc1, 0x97, 0xb4, 0xce, 0xb1,
+	0x00, 0x9c, 0x00, 0x93, 0x00, 0xbe,
+};
+
+static const unsigned char s6e8ax0_22_gamma_170[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb5, 0xbf, 0xb1, 0xd1,
+	0xb1, 0xc3, 0xde, 0xc3, 0x99, 0xc0, 0x96, 0xb4, 0xce, 0xb1,
+	0x00, 0x9f, 0x00, 0x96, 0x00, 0xc2,
+};
+
+static const unsigned char s6e8ax0_22_gamma_180[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb7, 0xbe, 0xb3, 0xd2,
+	0xb3, 0xc3, 0xde, 0xc2, 0x97, 0xbf, 0x95, 0xb4, 0xcd, 0xb1,
+	0x00, 0xa2, 0x00, 0x99, 0x00, 0xc5,
+};
+
+static const unsigned char s6e8ax0_22_gamma_190[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb9, 0xbe, 0xb2, 0xd2,
+	0xb2, 0xc3, 0xdd, 0xc3, 0x98, 0xbf, 0x95, 0xb2, 0xcc, 0xaf,
+	0x00, 0xa5, 0x00, 0x9c, 0x00, 0xc9,
+};
+
+static const unsigned char s6e8ax0_22_gamma_200[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xaf, 0xb9, 0xbc, 0xb2, 0xd2,
+	0xb1, 0xc4, 0xdd, 0xc3, 0x97, 0xbe, 0x95, 0xb1, 0xcb, 0xae,
+	0x00, 0xa8, 0x00, 0x9f, 0x00, 0xcd,
+};
+
+static const unsigned char s6e8ax0_22_gamma_210[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc1, 0xbd, 0xb1, 0xd1,
+	0xb1, 0xc2, 0xde, 0xc2, 0x97, 0xbe, 0x94, 0xB0, 0xc9, 0xad,
+	0x00, 0xae, 0x00, 0xa4, 0x00, 0xd4,
+};
+
+static const unsigned char s6e8ax0_22_gamma_220[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc7, 0xbd, 0xb1, 0xd1,
+	0xb1, 0xc2, 0xdd, 0xc2, 0x97, 0xbd, 0x94, 0xb0, 0xc9, 0xad,
+	0x00, 0xad, 0x00, 0xa2, 0x00, 0xd3,
+};
+
+static const unsigned char s6e8ax0_22_gamma_230[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xc3, 0xbd, 0xb2, 0xd1,
+	0xb1, 0xc3, 0xdd, 0xc1, 0x96, 0xbd, 0x94, 0xb0, 0xc9, 0xad,
+	0x00, 0xb0, 0x00, 0xa7, 0x00, 0xd7,
+};
+
+static const unsigned char s6e8ax0_22_gamma_240[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb1, 0xcb, 0xbd, 0xb1, 0xd2,
+	0xb1, 0xc3, 0xdD, 0xc2, 0x95, 0xbd, 0x93, 0xaf, 0xc8, 0xab,
+	0x00, 0xb3, 0x00, 0xa9, 0x00, 0xdb,
+};
+
+static const unsigned char s6e8ax0_22_gamma_250[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xcc, 0xbe, 0xb0, 0xd2,
+	0xb0, 0xc3, 0xdD, 0xc2, 0x94, 0xbc, 0x92, 0xae, 0xc8, 0xab,
+	0x00, 0xb6, 0x00, 0xab, 0x00, 0xde,
+};
+
+static const unsigned char s6e8ax0_22_gamma_260[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb3, 0xd0, 0xbe, 0xaf, 0xd1,
+	0xaf, 0xc2, 0xdd, 0xc1, 0x96, 0xbc, 0x93, 0xaf, 0xc8, 0xac,
+	0x00, 0xb7, 0x00, 0xad, 0x00, 0xe0,
+};
+
+static const unsigned char s6e8ax0_22_gamma_270[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb2, 0xcF, 0xbd, 0xb0, 0xd2,
+	0xaf, 0xc2, 0xdc, 0xc1, 0x95, 0xbd, 0x93, 0xae, 0xc6, 0xaa,
+	0x00, 0xba, 0x00, 0xb0, 0x00, 0xe4,
+};
+
+static const unsigned char s6e8ax0_22_gamma_280[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb2, 0xd0, 0xbd, 0xaf, 0xd0,
+	0xad, 0xc4, 0xdd, 0xc3, 0x95, 0xbd, 0x93, 0xac, 0xc5, 0xa9,
+	0x00, 0xbd, 0x00, 0xb2, 0x00, 0xe7,
+};
+
+static const unsigned char s6e8ax0_22_gamma_300[] = {
+	0xfa, 0x01, 0x60, 0x10, 0x60, 0xb5, 0xd3, 0xbd, 0xb1, 0xd2,
+	0xb0, 0xc0, 0xdc, 0xc0, 0x94, 0xba, 0x91, 0xac, 0xc5, 0xa9,
+	0x00, 0xc2, 0x00, 0xb7, 0x00, 0xed,
+};
+
+static const unsigned char *s6e8ax0_22_gamma_table[] = {
+	s6e8ax0_22_gamma_30,
+	s6e8ax0_22_gamma_50,
+	s6e8ax0_22_gamma_60,
+	s6e8ax0_22_gamma_70,
+	s6e8ax0_22_gamma_80,
+	s6e8ax0_22_gamma_90,
+	s6e8ax0_22_gamma_100,
+	s6e8ax0_22_gamma_120,
+	s6e8ax0_22_gamma_130,
+	s6e8ax0_22_gamma_140,
+	s6e8ax0_22_gamma_150,
+	s6e8ax0_22_gamma_160,
+	s6e8ax0_22_gamma_170,
+	s6e8ax0_22_gamma_180,
+	s6e8ax0_22_gamma_190,
+	s6e8ax0_22_gamma_200,
+	s6e8ax0_22_gamma_210,
+	s6e8ax0_22_gamma_220,
+	s6e8ax0_22_gamma_230,
+	s6e8ax0_22_gamma_240,
+	s6e8ax0_22_gamma_250,
+	s6e8ax0_22_gamma_260,
+	s6e8ax0_22_gamma_270,
+	s6e8ax0_22_gamma_280,
+	s6e8ax0_22_gamma_300,
+};
+
+static void s6e8ax0_panel_cond(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+	static const unsigned char data_to_send[] = {
+		0xf8, 0x3d, 0x35, 0x00, 0x00, 0x00, 0x93, 0x00, 0x3c, 0x7d,
+		0x08, 0x27, 0x7d, 0x3f, 0x00, 0x00, 0x00, 0x20, 0x04, 0x08,
+		0x6e, 0x00, 0x00, 0x00, 0x02, 0x08, 0x08, 0x23, 0x23, 0xc0,
+		0xc8, 0x08, 0x48, 0xc1, 0x00, 0xc1, 0xff, 0xff, 0xc8
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_cond(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xf2, 0x80, 0x03, 0x0d
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Gamma 2.2 Setting (200cd, 7500K, 10MPCD) */
+static void s6e8ax0_gamma_cond(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	unsigned int gamma = lcd->bd->props.brightness;
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+			s6e8ax0_22_gamma_table[gamma],
+			GAMMA_TABLE_COUNT);
+}
+
+static void s6e8ax0_gamma_update(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xf7, 0x03
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send,
+		ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond1(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xd1, 0xfe, 0x80, 0x00, 0x01, 0x0b, 0x00, 0x00, 0x40,
+		0x0d, 0x00, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond2(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xb6, 0x0c, 0x02, 0x03, 0x32, 0xff, 0x44, 0x44, 0xc0,
+		0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond3(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xe1, 0x10, 0x1c, 0x17, 0x08, 0x1d
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond4(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xe2, 0xed, 0x07, 0xc3, 0x13, 0x0d, 0x03
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond5(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xf4, 0xcf, 0x0a, 0x12, 0x10, 0x19, 0x33, 0x02
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+static void s6e8ax0_etc_cond6(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xe3, 0x40
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE_PARAM,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_etc_cond7(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xe4, 0x00, 0x00, 0x14, 0x80, 0x00, 0x00, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_set(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xb1, 0x04, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_elvss_nvm_set(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xd9, 0x5c, 0x20, 0x0c, 0x0f, 0x41, 0x00, 0x10, 0x11,
+		0x12, 0xd1, 0x00, 0x00, 0x00, 0x00, 0x80, 0xcb, 0xed,
+		0x64, 0xaf
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_in(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0x10, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_sleep_out(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0x11, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_on(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0x29, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_display_off(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0x28, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_apply_level2_key(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xf0, 0x5a, 0x5a
+	};
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_on(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xc0, 0x01
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+static void s6e8ax0_acl_off(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	static const unsigned char data_to_send[] = {
+		0xc0, 0x00
+	};
+
+	ops->cmd_write(lcd_to_master(lcd),
+		MIPI_DSI_DCS_SHORT_WRITE,
+		data_to_send, ARRAY_SIZE(data_to_send));
+}
+
+/* Full white 50% reducing setting */
+static void s6e8ax0_acl_ctrl_set(struct s6e8ax0 *lcd)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	/* Full white 50% reducing setting */
+	static const unsigned char cutoff_50[] = {
+		0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+		0x00, 0x00, 0x04, 0xff,	0x00, 0x00, 0x00, 0x00, 0x00,
+		0x01, 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2a, 0x31, 0x38,
+		0x3f, 0x46
+	};
+	/* Full white 45% reducing setting */
+	static const unsigned char cutoff_45[] = {
+		0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+		0x00, 0x00, 0x04, 0xff,	0x00, 0x00, 0x00, 0x00, 0x00,
+		0x01, 0x07, 0x0d, 0x13, 0x19, 0x1f, 0x25, 0x2b, 0x31,
+		0x37, 0x3d
+	};
+	/* Full white 40% reducing setting */
+	static const unsigned char cutoff_40[] = {
+		0xc1, 0x47, 0x53, 0x13, 0x53, 0x00, 0x00, 0x02, 0xcf,
+		0x00, 0x00, 0x04, 0xff,	0x00, 0x00, 0x00, 0x00, 0x00,
+		0x01, 0x06, 0x0c, 0x11, 0x16, 0x1c, 0x21, 0x26, 0x2b,
+		0x31, 0x36
+	};
+
+	if (lcd->acl_enable) {
+		if (lcd->cur_acl == 0) {
+			if (lcd->gamma == 0 || lcd->gamma == 1) {
+				s6e8ax0_acl_off(lcd);
+				dev_dbg(&lcd->ld->dev,
+					"cur_acl=%d\n", lcd->cur_acl);
+			} else
+				s6e8ax0_acl_on(lcd);
+		}
+		switch (lcd->gamma) {
+		case 0: /* 30cd */
+			s6e8ax0_acl_off(lcd);
+			lcd->cur_acl = 0;
+			break;
+		case 1 ... 3: /* 50cd ~ 90cd */
+			ops->cmd_write(lcd_to_master(lcd),
+				MIPI_DSI_DCS_LONG_WRITE,
+				cutoff_40,
+				ARRAY_SIZE(cutoff_40));
+			lcd->cur_acl = 40;
+			break;
+		case 4 ... 7: /* 120cd ~ 210cd */
+			ops->cmd_write(lcd_to_master(lcd),
+				MIPI_DSI_DCS_LONG_WRITE,
+				cutoff_45,
+				ARRAY_SIZE(cutoff_45));
+			lcd->cur_acl = 45;
+			break;
+		case 8 ... 10: /* 220cd ~ 300cd */
+			ops->cmd_write(lcd_to_master(lcd),
+				MIPI_DSI_DCS_LONG_WRITE,
+				cutoff_50,
+				ARRAY_SIZE(cutoff_50));
+			lcd->cur_acl = 50;
+			break;
+		default:
+			break;
+		}
+	} else {
+		s6e8ax0_acl_off(lcd);
+		lcd->cur_acl = 0;
+		dev_dbg(&lcd->ld->dev, "cur_acl = %d\n", lcd->cur_acl);
+	}
+}
+
+static void s6e8ax0_read_id(struct s6e8ax0 *lcd, u8 *mtp_id)
+{
+	unsigned int ret;
+	unsigned int addr = 0xd1;	/* MTP ID */
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+	ret = ops->cmd_read(lcd_to_master(lcd),
+			MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM,
+			addr, 3, mtp_id);
+}
+
+static int s6e8ax0_panel_init(struct s6e8ax0 *lcd)
+{
+	s6e8ax0_apply_level2_key(lcd);
+	s6e8ax0_sleep_out(lcd);
+	msleep(1);
+	s6e8ax0_panel_cond(lcd);
+	s6e8ax0_display_cond(lcd);
+	s6e8ax0_gamma_cond(lcd);
+	s6e8ax0_gamma_update(lcd);
+
+	s6e8ax0_etc_cond1(lcd);
+	s6e8ax0_etc_cond2(lcd);
+	s6e8ax0_etc_cond3(lcd);
+	s6e8ax0_etc_cond4(lcd);
+	s6e8ax0_etc_cond5(lcd);
+	s6e8ax0_etc_cond6(lcd);
+	s6e8ax0_etc_cond7(lcd);
+
+	s6e8ax0_elvss_nvm_set(lcd);
+	s6e8ax0_elvss_set(lcd);
+
+	s6e8ax0_acl_ctrl_set(lcd);
+	s6e8ax0_acl_on(lcd);
+
+	/* if ID3 value is not 33h, branch private elvss mode */
+	msleep(lcd->ddi_pd->power_on_delay);
+
+	return 0;
+}
+
+static int s6e8ax0_update_gamma_ctrl(struct s6e8ax0 *lcd, int brightness)
+{
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+
+	ops->cmd_write(lcd_to_master(lcd), MIPI_DSI_DCS_LONG_WRITE,
+			s6e8ax0_22_gamma_table[brightness],
+			ARRAY_SIZE(s6e8ax0_22_gamma_table));
+
+	/* update gamma table. */
+	s6e8ax0_gamma_update(lcd);
+	lcd->gamma = brightness;
+
+	return 0;
+}
+
+static int s6e8ax0_gamma_ctrl(struct s6e8ax0 *lcd, int gamma)
+{
+	s6e8ax0_update_gamma_ctrl(lcd, gamma);
+
+	return 0;
+}
+
+static int s6e8ax0_set_power(struct lcd_device *ld, int power)
+{
+	struct s6e8ax0 *lcd = lcd_get_data(ld);
+	struct mipi_dsim_master_ops *ops = lcd_to_master_ops(lcd);
+	int ret = 0;
+
+	if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+			power != FB_BLANK_NORMAL) {
+		dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+		return -EINVAL;
+	}
+
+	if ((power == FB_BLANK_UNBLANK) && ops->set_blank_mode) {
+		/* LCD power on */
+		if ((POWER_IS_ON(power) && POWER_IS_OFF(lcd->power))
+			|| (POWER_IS_ON(power) && POWER_IS_NRM(lcd->power))) {
+			ret = ops->set_blank_mode(lcd_to_master(lcd), power);
+			if (!ret && lcd->power != power)
+				lcd->power = power;
+		}
+	} else if ((power == FB_BLANK_POWERDOWN) && ops->set_early_blank_mode) {
+		/* LCD power off */
+		if ((POWER_IS_OFF(power) && POWER_IS_ON(lcd->power)) ||
+		(POWER_IS_ON(lcd->power) && POWER_IS_NRM(power))) {
+			ret = ops->set_early_blank_mode(lcd_to_master(lcd),
+							power);
+			if (!ret && lcd->power != power)
+				lcd->power = power;
+		}
+	}
+
+	return ret;
+}
+
+static int s6e8ax0_get_power(struct lcd_device *ld)
+{
+	struct s6e8ax0 *lcd = lcd_get_data(ld);
+
+	return lcd->power;
+}
+
+static int s6e8ax0_get_brightness(struct backlight_device *bd)
+{
+	return bd->props.brightness;
+}
+
+static int s6e8ax0_set_brightness(struct backlight_device *bd)
+{
+	int ret = 0, brightness = bd->props.brightness;
+	struct s6e8ax0 *lcd = bl_get_data(bd);
+
+	if (brightness < MIN_BRIGHTNESS ||
+		brightness > bd->props.max_brightness) {
+		dev_err(lcd->dev, "lcd brightness should be %d to %d.\n",
+			MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+		return -EINVAL;
+	}
+
+	ret = s6e8ax0_gamma_ctrl(lcd, brightness);
+	if (ret) {
+		dev_err(&bd->dev, "lcd brightness setting failed.\n");
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static struct lcd_ops s6e8ax0_lcd_ops = {
+	.set_power = s6e8ax0_set_power,
+	.get_power = s6e8ax0_get_power,
+};
+
+static const struct backlight_ops s6e8ax0_backlight_ops = {
+	.get_brightness = s6e8ax0_get_brightness,
+	.update_status = s6e8ax0_set_brightness,
+};
+
+static void s6e8ax0_power_on(struct mipi_dsim_lcd_device *dsim_dev, int power)
+{
+	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+	msleep(lcd->ddi_pd->power_on_delay);
+
+	/* lcd power on */
+	if (power)
+		s6e8ax0_regulator_enable(lcd);
+	else
+		s6e8ax0_regulator_disable(lcd);
+
+	msleep(lcd->ddi_pd->reset_delay);
+
+	/* lcd reset */
+	if (lcd->ddi_pd->reset)
+		lcd->ddi_pd->reset(lcd->ld);
+	msleep(5);
+}
+
+static void s6e8ax0_set_sequence(struct mipi_dsim_lcd_device *dsim_dev)
+{
+	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+	s6e8ax0_panel_init(lcd);
+	s6e8ax0_display_on(lcd);
+
+	lcd->power = FB_BLANK_UNBLANK;
+}
+
+static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
+{
+	struct s6e8ax0 *lcd;
+	int ret;
+	u8 mtp_id[3] = {0, };
+
+	lcd = kzalloc(sizeof(struct s6e8ax0), GFP_KERNEL);
+	if (!lcd) {
+		dev_err(&dsim_dev->dev, "failed to allocate s6e8ax0 structure.\n");
+		return -ENOMEM;
+	}
+
+	lcd->dsim_dev = dsim_dev;
+	lcd->ddi_pd = (struct lcd_platform_data *)dsim_dev->platform_data;
+	lcd->dev = &dsim_dev->dev;
+
+	mutex_init(&lcd->lock);
+
+	ret = regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies);
+	if (ret) {
+		dev_err(lcd->dev, "Failed to get regulators: %d\n", ret);
+		goto err_lcd_register;
+	}
+
+	lcd->ld = lcd_device_register("s6e8ax0", lcd->dev, lcd,
+			&s6e8ax0_lcd_ops);
+	if (IS_ERR(lcd->ld)) {
+		dev_err(lcd->dev, "failed to register lcd ops.\n");
+		ret = PTR_ERR(lcd->ld);
+		goto err_lcd_register;
+	}
+
+	lcd->bd = backlight_device_register("s6e8ax0-bl", lcd->dev, lcd,
+			&s6e8ax0_backlight_ops, NULL);
+	if (IS_ERR(lcd->bd)) {
+		dev_err(lcd->dev, "failed to register backlight ops.\n");
+		ret = PTR_ERR(lcd->bd);
+		goto err_backlight_register;
+	}
+
+	lcd->bd->props.max_brightness = MAX_BRIGHTNESS;
+	lcd->bd->props.brightness = MAX_BRIGHTNESS;
+
+	s6e8ax0_read_id(lcd, mtp_id);
+	if (mtp_id[0] == 0x00)
+		dev_err(lcd->dev, "read id failed\n");
+
+	dev_info(lcd->dev, "Read ID : %x, %x, %x\n",
+			mtp_id[0], mtp_id[1], mtp_id[2]);
+
+	if (mtp_id[2] == 0x33)
+		dev_info(lcd->dev,
+			"ID-3 is 0xff does not support dynamic elvss\n");
+	else
+		dev_info(lcd->dev,
+			"ID-3 is 0x%x support dynamic elvss\n", mtp_id[2]);
+
+	lcd->acl_enable = 1;
+	lcd->cur_acl = 0;
+
+	dev_set_drvdata(&dsim_dev->dev, lcd);
+
+	dev_dbg(lcd->dev, "probed s6e8ax0 panel driver.\n");
+
+	return 0;
+
+err_backlight_register:
+	lcd_device_unregister(lcd->ld);
+
+err_lcd_register:
+	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
+	kfree(lcd);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
+{
+	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+	s6e8ax0_sleep_in(lcd);
+	msleep(lcd->ddi_pd->power_off_delay);
+	s6e8ax0_display_off(lcd);
+
+	s6e8ax0_regulator_disable(lcd);
+
+	return 0;
+}
+
+static int s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
+{
+	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
+
+	s6e8ax0_sleep_out(lcd);
+	msleep(lcd->ddi_pd->power_on_delay);
+
+	s6e8ax0_regulator_enable(lcd);
+	s6e8ax0_set_sequence(dsim_dev);
+
+	return 0;
+}
+#else
+#define s6e8ax0_suspend		NULL
+#define s6e8ax0_resume		NULL
+#endif
+
+static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = {
+	.name = "s6e8ax0",
+	.id = -1,
+
+	.power_on = s6e8ax0_power_on,
+	.set_sequence = s6e8ax0_set_sequence,
+	.probe = s6e8ax0_probe,
+	.suspend = s6e8ax0_suspend,
+	.resume = s6e8ax0_resume,
+};
+
+static int s6e8ax0_init(void)
+{
+	exynos_mipi_dsi_register_lcd_driver(&s6e8ax0_dsim_ddi_driver);
+
+	return 0;
+}
+
+static void s6e8ax0_exit(void)
+{
+	return;
+}
+
+module_init(s6e8ax0_init);
+module_exit(s6e8ax0_exit);
+
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e8ax0 AMOLED LCD Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/exynos/s6e8ax0.h b/drivers/video/exynos/s6e8ax0.h
new file mode 100644
index 00000000000..1f1b270484b
--- /dev/null
+++ b/drivers/video/exynos/s6e8ax0.h
@@ -0,0 +1,21 @@
+/* linux/drivers/video/backlight/s6e8ax0.h
+ *
+ * MIPI-DSI based s6e8ax0 AMOLED LCD Panel definitions.
+ *
+ * Copyright (c) 2011 Samsung Electronics
+ *
+ * Inki Dae, <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S6E8AX0_H
+#define _S6E8AX0_H
+
+extern void s6e8ax0_init(void);
+
+#endif
+
-- 
cgit v1.2.3-70-g09d2


From e9474be4eb6918c91cb0d296f9744e8ec0e08c11 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 3 Feb 2012 18:01:55 +0900
Subject: video: support DP controller driver

Samsung EXYNOS SoC such Exynos5 has DP controller and embedded DP
panel can be used. This patch supports DP driver based on Samsung
EXYNOS SoC chip.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/exynos/Kconfig          |    7 +
 drivers/video/exynos/Makefile         |    1 +
 drivers/video/exynos/exynos_dp_core.c | 1058 +++++++++++++++++++++++++++++
 drivers/video/exynos/exynos_dp_core.h |  206 ++++++
 drivers/video/exynos/exynos_dp_reg.c  | 1173 +++++++++++++++++++++++++++++++++
 drivers/video/exynos/exynos_dp_reg.h  |  335 ++++++++++
 include/video/exynos_dp.h             |  131 ++++
 7 files changed, 2911 insertions(+)
 create mode 100644 drivers/video/exynos/exynos_dp_core.c
 create mode 100644 drivers/video/exynos/exynos_dp_core.h
 create mode 100644 drivers/video/exynos/exynos_dp_reg.c
 create mode 100644 drivers/video/exynos/exynos_dp_reg.h
 create mode 100644 include/video/exynos_dp.h

(limited to 'drivers/video')

diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig
index 7032ad9f3fb..1b035b2eb6b 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/exynos/Kconfig
@@ -27,4 +27,11 @@ config EXYNOS_LCD_S6E8AX0
 	  If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
 	  LCD control driver.
 
+config EXYNOS_DP
+	bool "EXYNOS DP driver support"
+	depends on ARCH_EXYNOS
+	default n
+	help
+	  This enables support for DP device.
+
 endif # EXYNOS_VIDEO
diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile
index b5b1bd228ab..ec7772e452a 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/exynos/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_EXYNOS_MIPI_DSI)		+= exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
 				     	exynos_mipi_dsi_lowlevel.o
 obj-$(CONFIG_EXYNOS_LCD_S6E8AX0)	+= s6e8ax0.o
+obj-$(CONFIG_EXYNOS_DP)			+= exynos_dp_core.o exynos_dp_reg.o
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
new file mode 100644
index 00000000000..2a4481cf260
--- /dev/null
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -0,0 +1,1058 @@
+/*
+ * Samsung SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <video/exynos_dp.h>
+
+#include <plat/cpu.h>
+
+#include "exynos_dp_core.h"
+
+static int exynos_dp_init_dp(struct exynos_dp_device *dp)
+{
+	exynos_dp_reset(dp);
+
+	/* SW defined function Normal operation */
+	exynos_dp_enable_sw_function(dp);
+
+	exynos_dp_config_interrupt(dp);
+	exynos_dp_init_analog_func(dp);
+
+	exynos_dp_init_hpd(dp);
+	exynos_dp_init_aux(dp);
+
+	return 0;
+}
+
+static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
+{
+	int timeout_loop = 0;
+
+	exynos_dp_init_hpd(dp);
+
+	udelay(200);
+
+	while (exynos_dp_get_plug_in_status(dp) != 0) {
+		timeout_loop++;
+		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+			dev_err(dp->dev, "failed to get hpd plug status\n");
+			return -ETIMEDOUT;
+		}
+		udelay(10);
+	}
+
+	return 0;
+}
+
+static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
+{
+	int i;
+	unsigned char sum = 0;
+
+	for (i = 0; i < EDID_BLOCK_LENGTH; i++)
+		sum = sum + edid_data[i];
+
+	return sum;
+}
+
+static int exynos_dp_read_edid(struct exynos_dp_device *dp)
+{
+	unsigned char edid[EDID_BLOCK_LENGTH * 2];
+	unsigned int extend_block = 0;
+	unsigned char sum;
+	unsigned char test_vector;
+	int retval;
+
+	/*
+	 * EDID device address is 0x50.
+	 * However, if necessary, you must have set upper address
+	 * into E-EDID in I2C device, 0x30.
+	 */
+
+	/* Read Extension Flag, Number of 128-byte EDID extension blocks */
+	exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
+				EDID_EXTENSION_FLAG,
+				&extend_block);
+
+	if (extend_block > 0) {
+		dev_dbg(dp->dev, "EDID data includes a single extension!\n");
+
+		/* Read EDID data */
+		retval = exynos_dp_read_bytes_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
+						EDID_HEADER_PATTERN,
+						EDID_BLOCK_LENGTH,
+						&edid[EDID_HEADER_PATTERN]);
+		if (retval != 0) {
+			dev_err(dp->dev, "EDID Read failed!\n");
+			return -EIO;
+		}
+		sum = exynos_dp_calc_edid_check_sum(edid);
+		if (sum != 0) {
+			dev_err(dp->dev, "EDID bad checksum!\n");
+			return -EIO;
+		}
+
+		/* Read additional EDID data */
+		retval = exynos_dp_read_bytes_from_i2c(dp,
+				I2C_EDID_DEVICE_ADDR,
+				EDID_BLOCK_LENGTH,
+				EDID_BLOCK_LENGTH,
+				&edid[EDID_BLOCK_LENGTH]);
+		if (retval != 0) {
+			dev_err(dp->dev, "EDID Read failed!\n");
+			return -EIO;
+		}
+		sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
+		if (sum != 0) {
+			dev_err(dp->dev, "EDID bad checksum!\n");
+			return -EIO;
+		}
+
+		exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TEST_REQUEST,
+					&test_vector);
+		if (test_vector & DPCD_TEST_EDID_READ) {
+			exynos_dp_write_byte_to_dpcd(dp,
+				DPCD_ADDR_TEST_EDID_CHECKSUM,
+				edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
+			exynos_dp_write_byte_to_dpcd(dp,
+				DPCD_ADDR_TEST_RESPONSE,
+				DPCD_TEST_EDID_CHECKSUM_WRITE);
+		}
+	} else {
+		dev_info(dp->dev, "EDID data does not include any extensions.\n");
+
+		/* Read EDID data */
+		retval = exynos_dp_read_bytes_from_i2c(dp,
+				I2C_EDID_DEVICE_ADDR,
+				EDID_HEADER_PATTERN,
+				EDID_BLOCK_LENGTH,
+				&edid[EDID_HEADER_PATTERN]);
+		if (retval != 0) {
+			dev_err(dp->dev, "EDID Read failed!\n");
+			return -EIO;
+		}
+		sum = exynos_dp_calc_edid_check_sum(edid);
+		if (sum != 0) {
+			dev_err(dp->dev, "EDID bad checksum!\n");
+			return -EIO;
+		}
+
+		exynos_dp_read_byte_from_dpcd(dp,
+			DPCD_ADDR_TEST_REQUEST,
+			&test_vector);
+		if (test_vector & DPCD_TEST_EDID_READ) {
+			exynos_dp_write_byte_to_dpcd(dp,
+				DPCD_ADDR_TEST_EDID_CHECKSUM,
+				edid[EDID_CHECKSUM]);
+			exynos_dp_write_byte_to_dpcd(dp,
+				DPCD_ADDR_TEST_RESPONSE,
+				DPCD_TEST_EDID_CHECKSUM_WRITE);
+		}
+	}
+
+	dev_err(dp->dev, "EDID Read success!\n");
+	return 0;
+}
+
+static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
+{
+	u8 buf[12];
+	int i;
+	int retval;
+
+	/* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */
+	exynos_dp_read_bytes_from_dpcd(dp,
+		DPCD_ADDR_DPCD_REV,
+		12, buf);
+
+	/* Read EDID */
+	for (i = 0; i < 3; i++) {
+		retval = exynos_dp_read_edid(dp);
+		if (retval == 0)
+			break;
+	}
+
+	return retval;
+}
+
+static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device *dp,
+						bool enable)
+{
+	u8 data;
+
+	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data);
+
+	if (enable)
+		exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
+			DPCD_ENHANCED_FRAME_EN |
+			DPCD_LANE_COUNT_SET(data));
+	else
+		exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET,
+			DPCD_LANE_COUNT_SET(data));
+}
+
+static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device *dp)
+{
+	u8 data;
+	int retval;
+
+	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
+	retval = DPCD_ENHANCED_FRAME_CAP(data);
+
+	return retval;
+}
+
+static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp)
+{
+	u8 data;
+
+	data = exynos_dp_is_enhanced_mode_available(dp);
+	exynos_dp_enable_rx_to_enhanced_mode(dp, data);
+	exynos_dp_enable_enhanced_mode(dp, data);
+}
+
+static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
+{
+	exynos_dp_set_training_pattern(dp, DP_NONE);
+
+	exynos_dp_write_byte_to_dpcd(dp,
+		DPCD_ADDR_TRAINING_PATTERN_SET,
+		DPCD_TRAINING_PATTERN_DISABLED);
+}
+
+static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device *dp,
+					int pre_emphasis, int lane)
+{
+	switch (lane) {
+	case 0:
+		exynos_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
+		break;
+	case 1:
+		exynos_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 2:
+		exynos_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 3:
+		exynos_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
+		break;
+	}
+}
+
+static void exynos_dp_link_start(struct exynos_dp_device *dp)
+{
+	u8 buf[5];
+	int lane;
+	int lane_count;
+
+	lane_count = dp->link_train.lane_count;
+
+	dp->link_train.lt_state = CLOCK_RECOVERY;
+	dp->link_train.eq_loop = 0;
+
+	for (lane = 0; lane < lane_count; lane++)
+		dp->link_train.cr_loop[lane] = 0;
+
+	/* Set sink to D0 (Sink Not Ready) mode. */
+	exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE,
+				DPCD_SET_POWER_STATE_D0);
+
+	/* Set link rate and count as you want to establish*/
+	exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	exynos_dp_set_lane_count(dp, dp->link_train.lane_count);
+
+	/* Setup RX configuration */
+	buf[0] = dp->link_train.link_rate;
+	buf[1] = dp->link_train.lane_count;
+	exynos_dp_write_bytes_to_dpcd(dp, DPCD_ADDR_LINK_BW_SET,
+				2, buf);
+
+	/* Set TX pre-emphasis to minimum */
+	for (lane = 0; lane < lane_count; lane++)
+		exynos_dp_set_lane_lane_pre_emphasis(dp,
+			PRE_EMPHASIS_LEVEL_0, lane);
+
+	/* Set training pattern 1 */
+	exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
+
+	/* Set RX training pattern */
+	buf[0] = DPCD_SCRAMBLING_DISABLED |
+		 DPCD_TRAINING_PATTERN_1;
+	exynos_dp_write_byte_to_dpcd(dp,
+		DPCD_ADDR_TRAINING_PATTERN_SET, buf[0]);
+
+	for (lane = 0; lane < lane_count; lane++)
+		buf[lane] = DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 |
+			    DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0;
+	exynos_dp_write_bytes_to_dpcd(dp,
+		DPCD_ADDR_TRAINING_PATTERN_SET,
+		lane_count, buf);
+}
+
+static unsigned char exynos_dp_get_lane_status(u8 link_status[6], int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = link_status[lane>>1];
+
+	return (link_value >> shift) & 0xf;
+}
+
+static int exynos_dp_clock_recovery_ok(u8 link_status[6], int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = exynos_dp_get_lane_status(link_status, lane);
+		if ((lane_status & DPCD_LANE_CR_DONE) == 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int exynos_dp_channel_eq_ok(u8 link_status[6], int lane_count)
+{
+	int lane;
+	u8 lane_align;
+	u8 lane_status;
+
+	lane_align = link_status[2];
+	if ((lane_align == DPCD_INTERLANE_ALIGN_DONE) == 0)
+		return -EINVAL;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = exynos_dp_get_lane_status(link_status, lane);
+		lane_status &= DPCD_CHANNEL_EQ_BITS;
+		if (lane_status != DPCD_CHANNEL_EQ_BITS)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static unsigned char exynos_dp_get_adjust_request_voltage(u8 adjust_request[2],
+							int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane>>1];
+
+	return (link_value >> shift) & 0x3;
+}
+
+static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
+					u8 adjust_request[2],
+					int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane>>1];
+
+	return ((link_value >> shift) & 0xc) >> 2;
+}
+
+static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
+					u8 training_lane_set, int lane)
+{
+	switch (lane) {
+	case 0:
+		exynos_dp_set_lane0_link_training(dp, training_lane_set);
+		break;
+	case 1:
+		exynos_dp_set_lane1_link_training(dp, training_lane_set);
+		break;
+
+	case 2:
+		exynos_dp_set_lane2_link_training(dp, training_lane_set);
+		break;
+
+	case 3:
+		exynos_dp_set_lane3_link_training(dp, training_lane_set);
+		break;
+	}
+}
+
+static unsigned int exynos_dp_get_lane_link_training(
+				struct exynos_dp_device *dp,
+				int lane)
+{
+	u32 reg;
+
+	switch (lane) {
+	case 0:
+		reg = exynos_dp_get_lane0_link_training(dp);
+		break;
+	case 1:
+		reg = exynos_dp_get_lane1_link_training(dp);
+		break;
+	case 2:
+		reg = exynos_dp_get_lane2_link_training(dp);
+		break;
+	case 3:
+		reg = exynos_dp_get_lane3_link_training(dp);
+		break;
+	}
+
+	return reg;
+}
+
+static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
+{
+	if (dp->link_train.link_rate == LINK_RATE_2_70GBPS) {
+		/* set to reduced bit rate */
+		dp->link_train.link_rate = LINK_RATE_1_62GBPS;
+		dev_err(dp->dev, "set to bandwidth %.2x\n",
+			dp->link_train.link_rate);
+		dp->link_train.lt_state = START;
+	} else {
+		exynos_dp_training_pattern_dis(dp);
+		/* set enhanced mode if available */
+		exynos_dp_set_enhanced_mode(dp);
+		dp->link_train.lt_state = FAILED;
+	}
+}
+
+static void exynos_dp_get_adjust_train(struct exynos_dp_device *dp,
+				u8 adjust_request[2])
+{
+	int lane;
+	int lane_count;
+	u8 voltage_swing;
+	u8 pre_emphasis;
+	u8 training_lane;
+
+	lane_count = dp->link_train.lane_count;
+	for (lane = 0; lane < lane_count; lane++) {
+		voltage_swing = exynos_dp_get_adjust_request_voltage(
+						adjust_request, lane);
+		pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
+						adjust_request, lane);
+		training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
+				DPCD_PRE_EMPHASIS_SET(pre_emphasis);
+
+		if (voltage_swing == VOLTAGE_LEVEL_3 ||
+		   pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
+			training_lane |= DPCD_MAX_SWING_REACHED;
+			training_lane |= DPCD_MAX_PRE_EMPHASIS_REACHED;
+		}
+		dp->link_train.training_lane[lane] = training_lane;
+	}
+}
+
+static int exynos_dp_check_max_cr_loop(struct exynos_dp_device *dp,
+					u8 voltage_swing)
+{
+	int lane;
+	int lane_count;
+
+	lane_count = dp->link_train.lane_count;
+	for (lane = 0; lane < lane_count; lane++) {
+		if (voltage_swing == VOLTAGE_LEVEL_3 ||
+			dp->link_train.cr_loop[lane] == MAX_CR_LOOP)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
+{
+	u8 data;
+	u8 link_status[6];
+	int lane;
+	int lane_count;
+	u8 buf[5];
+
+	u8 *adjust_request;
+	u8 voltage_swing;
+	u8 pre_emphasis;
+	u8 training_lane;
+
+	udelay(100);
+
+	exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
+				6, link_status);
+	lane_count = dp->link_train.lane_count;
+
+	if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
+		/* set training pattern 2 for EQ */
+		exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
+
+		adjust_request = link_status + (DPCD_ADDR_ADJUST_REQUEST_LANE0_1
+						- DPCD_ADDR_LANE0_1_STATUS);
+
+		exynos_dp_get_adjust_train(dp, adjust_request);
+
+		buf[0] = DPCD_SCRAMBLING_DISABLED |
+			 DPCD_TRAINING_PATTERN_2;
+		exynos_dp_write_byte_to_dpcd(dp,
+			DPCD_ADDR_TRAINING_LANE0_SET,
+			buf[0]);
+
+		for (lane = 0; lane < lane_count; lane++) {
+			exynos_dp_set_lane_link_training(dp,
+				dp->link_train.training_lane[lane],
+				lane);
+			buf[lane] = dp->link_train.training_lane[lane];
+			exynos_dp_write_byte_to_dpcd(dp,
+				DPCD_ADDR_TRAINING_LANE0_SET + lane,
+				buf[lane]);
+		}
+		dp->link_train.lt_state = EQUALIZER_TRAINING;
+	} else {
+		exynos_dp_read_byte_from_dpcd(dp,
+			DPCD_ADDR_ADJUST_REQUEST_LANE0_1,
+			&data);
+		adjust_request[0] = data;
+
+		exynos_dp_read_byte_from_dpcd(dp,
+			DPCD_ADDR_ADJUST_REQUEST_LANE2_3,
+			&data);
+		adjust_request[1] = data;
+
+		for (lane = 0; lane < lane_count; lane++) {
+			training_lane = exynos_dp_get_lane_link_training(
+							dp, lane);
+			voltage_swing = exynos_dp_get_adjust_request_voltage(
+							adjust_request, lane);
+			pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
+							adjust_request, lane);
+			if ((DPCD_VOLTAGE_SWING_GET(training_lane) == voltage_swing) &&
+			    (DPCD_PRE_EMPHASIS_GET(training_lane) == pre_emphasis))
+				dp->link_train.cr_loop[lane]++;
+			dp->link_train.training_lane[lane] = training_lane;
+		}
+
+		if (exynos_dp_check_max_cr_loop(dp, voltage_swing) != 0) {
+			exynos_dp_reduce_link_rate(dp);
+		} else {
+			exynos_dp_get_adjust_train(dp, adjust_request);
+
+			for (lane = 0; lane < lane_count; lane++) {
+				exynos_dp_set_lane_link_training(dp,
+					dp->link_train.training_lane[lane],
+					lane);
+				buf[lane] = dp->link_train.training_lane[lane];
+				exynos_dp_write_byte_to_dpcd(dp,
+					DPCD_ADDR_TRAINING_LANE0_SET + lane,
+					buf[lane]);
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
+{
+	u8 link_status[6];
+	int lane;
+	int lane_count;
+	u8 buf[5];
+	u32 reg;
+
+	u8 *adjust_request;
+
+	udelay(400);
+
+	exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_LANE0_1_STATUS,
+				6, link_status);
+	lane_count = dp->link_train.lane_count;
+
+	if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
+		adjust_request = link_status + (DPCD_ADDR_ADJUST_REQUEST_LANE0_1
+						- DPCD_ADDR_LANE0_1_STATUS);
+
+		if (exynos_dp_channel_eq_ok(link_status, lane_count) == 0) {
+			/* traing pattern Set to Normal */
+			exynos_dp_training_pattern_dis(dp);
+
+			dev_info(dp->dev, "Link Training success!\n");
+
+			exynos_dp_get_link_bandwidth(dp, &reg);
+			dp->link_train.link_rate = reg;
+			dev_dbg(dp->dev, "final bandwidth = %.2x\n",
+				dp->link_train.link_rate);
+
+			exynos_dp_get_lane_count(dp, &reg);
+			dp->link_train.lane_count = reg;
+			dev_dbg(dp->dev, "final lane count = %.2x\n",
+				dp->link_train.lane_count);
+			/* set enhanced mode if available */
+			exynos_dp_set_enhanced_mode(dp);
+
+			dp->link_train.lt_state = FINISHED;
+		} else {
+			/* not all locked */
+			dp->link_train.eq_loop++;
+
+			if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
+				exynos_dp_reduce_link_rate(dp);
+			} else {
+				exynos_dp_get_adjust_train(dp, adjust_request);
+
+				for (lane = 0; lane < lane_count; lane++) {
+					exynos_dp_set_lane_link_training(dp,
+						dp->link_train.training_lane[lane],
+						lane);
+					buf[lane] = dp->link_train.training_lane[lane];
+					exynos_dp_write_byte_to_dpcd(dp,
+						DPCD_ADDR_TRAINING_LANE0_SET + lane,
+						buf[lane]);
+				}
+			}
+		}
+	} else {
+		exynos_dp_reduce_link_rate(dp);
+	}
+
+	return 0;
+}
+
+static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
+			u8 *bandwidth)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+	 */
+	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LINK_RATE, &data);
+	*bandwidth = data;
+}
+
+static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
+			u8 *lane_count)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum number of Main Link lanes
+	 * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
+	 */
+	exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data);
+	*lane_count = DPCD_MAX_LANE_COUNT(data);
+}
+
+static void exynos_dp_init_training(struct exynos_dp_device *dp,
+			enum link_lane_count_type max_lane,
+			enum link_rate_type max_rate)
+{
+	/*
+	 * MACRO_RST must be applied after the PLL_LOCK to avoid
+	 * the DP inter pair skew issue for at least 10 us
+	 */
+	exynos_dp_reset_macro(dp);
+
+	/* Initialize by reading RX's DPCD */
+	exynos_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
+	exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+
+	if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
+	   (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+		dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
+			dp->link_train.link_rate);
+		dp->link_train.link_rate = LINK_RATE_1_62GBPS;
+	}
+
+	if (dp->link_train.lane_count == 0) {
+		dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
+			dp->link_train.lane_count);
+		dp->link_train.lane_count = (u8)LANE_COUNT1;
+	}
+
+	/* Setup TX lane count & rate */
+	if (dp->link_train.lane_count > max_lane)
+		dp->link_train.lane_count = max_lane;
+	if (dp->link_train.link_rate > max_rate)
+		dp->link_train.link_rate = max_rate;
+
+	/* All DP analog module power up */
+	exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
+}
+
+static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
+{
+	int retval = 0;
+	int training_finished;
+
+	/* Turn off unnecessary lane */
+	if (dp->link_train.lane_count == 1)
+		exynos_dp_set_analog_power_down(dp, CH1_BLOCK, 1);
+
+	training_finished = 0;
+
+	dp->link_train.lt_state = START;
+
+	/* Process here */
+	while (!training_finished) {
+		switch (dp->link_train.lt_state) {
+		case START:
+			exynos_dp_link_start(dp);
+			break;
+		case CLOCK_RECOVERY:
+			exynos_dp_process_clock_recovery(dp);
+			break;
+		case EQUALIZER_TRAINING:
+			exynos_dp_process_equalizer_training(dp);
+			break;
+		case FINISHED:
+			training_finished = 1;
+			break;
+		case FAILED:
+			return -EREMOTEIO;
+		}
+	}
+
+	return retval;
+}
+
+static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
+				u32 count,
+				u32 bwtype)
+{
+	int i;
+	int retval;
+
+	for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) {
+		exynos_dp_init_training(dp, count, bwtype);
+		retval = exynos_dp_sw_link_training(dp);
+		if (retval == 0)
+			break;
+
+		udelay(100);
+	}
+
+	return retval;
+}
+
+static int exynos_dp_config_video(struct exynos_dp_device *dp,
+			struct video_info *video_info)
+{
+	int retval = 0;
+	int timeout_loop = 0;
+	int done_count = 0;
+
+	exynos_dp_config_video_slave_mode(dp, video_info);
+
+	exynos_dp_set_video_color_format(dp, video_info->color_depth,
+			video_info->color_space,
+			video_info->dynamic_range,
+			video_info->ycbcr_coeff);
+
+	if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		dev_err(dp->dev, "PLL is not locked yet.\n");
+		return -EINVAL;
+	}
+
+	for (;;) {
+		timeout_loop++;
+		if (exynos_dp_is_slave_video_stream_clock_on(dp) == 0)
+			break;
+		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+			dev_err(dp->dev, "Timeout of video streamclk ok\n");
+			return -ETIMEDOUT;
+		}
+
+		mdelay(100);
+	}
+
+	/* Set to use the register calculated M/N video */
+	exynos_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
+
+	/* For video bist, Video timing must be generated by register */
+	exynos_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
+
+	/* Disable video mute */
+	exynos_dp_enable_video_mute(dp, 0);
+
+	/* Configure video slave mode */
+	exynos_dp_enable_video_master(dp, 0);
+
+	/* Enable video */
+	exynos_dp_start_video(dp);
+
+	timeout_loop = 0;
+
+	for (;;) {
+		timeout_loop++;
+		if (exynos_dp_is_video_stream_on(dp) == 0) {
+			done_count++;
+			if (done_count > 10)
+				break;
+		} else if (done_count) {
+			done_count = 0;
+		}
+		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+			dev_err(dp->dev, "Timeout of video streamclk ok\n");
+			return -ETIMEDOUT;
+		}
+
+		mdelay(100);
+	}
+
+	if (retval != 0)
+		dev_err(dp->dev, "Video stream is not detected!\n");
+
+	return retval;
+}
+
+static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool enable)
+{
+	u8 data;
+
+	if (enable) {
+		exynos_dp_enable_scrambling(dp);
+
+		exynos_dp_read_byte_from_dpcd(dp,
+			DPCD_ADDR_TRAINING_PATTERN_SET,
+			&data);
+		exynos_dp_write_byte_to_dpcd(dp,
+			DPCD_ADDR_TRAINING_PATTERN_SET,
+			(u8)(data & ~DPCD_SCRAMBLING_DISABLED));
+	} else {
+		exynos_dp_disable_scrambling(dp);
+
+		exynos_dp_read_byte_from_dpcd(dp,
+			DPCD_ADDR_TRAINING_PATTERN_SET,
+			&data);
+		exynos_dp_write_byte_to_dpcd(dp,
+			DPCD_ADDR_TRAINING_PATTERN_SET,
+			(u8)(data | DPCD_SCRAMBLING_DISABLED));
+	}
+}
+
+static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
+{
+	struct exynos_dp_device *dp = arg;
+
+	dev_err(dp->dev, "exynos_dp_irq_handler\n");
+	return IRQ_HANDLED;
+}
+
+static int __devinit exynos_dp_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct exynos_dp_device *dp;
+	struct exynos_dp_platdata *pdata;
+
+	int ret = 0;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	dp = kzalloc(sizeof(struct exynos_dp_device), GFP_KERNEL);
+	if (!dp) {
+		dev_err(&pdev->dev, "no memory for device data\n");
+		return -ENOMEM;
+	}
+
+	dp->dev = &pdev->dev;
+
+	dp->clock = clk_get(&pdev->dev, "dp");
+	if (IS_ERR(dp->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(dp->clock);
+		goto err_dp;
+	}
+
+	clk_enable(dp->clock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get registers\n");
+		ret = -EINVAL;
+		goto err_clock;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+				dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request registers region\n");
+		ret = -EINVAL;
+		goto err_clock;
+	}
+
+	dp->res = res;
+
+	dp->reg_base = ioremap(res->start, resource_size(res));
+	if (!dp->reg_base) {
+		dev_err(&pdev->dev, "failed to ioremap\n");
+		ret = -ENOMEM;
+		goto err_req_region;
+	}
+
+	dp->irq = platform_get_irq(pdev, 0);
+	if (!dp->irq) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		ret = -ENODEV;
+		goto err_ioremap;
+	}
+
+	ret = request_irq(dp->irq, exynos_dp_irq_handler, 0,
+			"exynos-dp", dp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		goto err_ioremap;
+	}
+
+	dp->video_info = pdata->video_info;
+	if (pdata->phy_init)
+		pdata->phy_init();
+
+	exynos_dp_init_dp(dp);
+
+	ret = exynos_dp_detect_hpd(dp);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to detect hpd\n");
+		goto err_irq;
+	}
+
+	exynos_dp_handle_edid(dp);
+
+	ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
+				dp->video_info->link_rate);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to do link train\n");
+		goto err_irq;
+	}
+
+	exynos_dp_enable_scramble(dp, 1);
+	exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
+	exynos_dp_enable_enhanced_mode(dp, 1);
+
+	exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
+	exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+
+	exynos_dp_init_video(dp);
+	ret = exynos_dp_config_video(dp, dp->video_info);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to config video\n");
+		goto err_irq;
+	}
+
+	platform_set_drvdata(pdev, dp);
+
+	return 0;
+
+err_irq:
+	free_irq(dp->irq, dp);
+err_ioremap:
+	iounmap(dp->reg_base);
+err_req_region:
+	release_mem_region(res->start, resource_size(res));
+err_clock:
+	clk_put(dp->clock);
+err_dp:
+	kfree(dp);
+
+	return ret;
+}
+
+static int __devexit exynos_dp_remove(struct platform_device *pdev)
+{
+	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
+	if (pdata && pdata->phy_exit)
+		pdata->phy_exit();
+
+	free_irq(dp->irq, dp);
+	iounmap(dp->reg_base);
+
+	clk_disable(dp->clock);
+	clk_put(dp->clock);
+
+	release_mem_region(dp->res->start, resource_size(dp->res));
+
+	kfree(dp);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_dp_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
+	if (pdata && pdata->phy_exit)
+		pdata->phy_exit();
+
+	clk_disable(dp->clock);
+
+	return 0;
+}
+
+static int exynos_dp_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
+	if (pdata && pdata->phy_init)
+		pdata->phy_init();
+
+	clk_enable(dp->clock);
+
+	exynos_dp_init_dp(dp);
+
+	exynos_dp_detect_hpd(dp);
+	exynos_dp_handle_edid(dp);
+
+	exynos_dp_set_link_train(dp, dp->video_info->lane_count,
+				dp->video_info->link_rate);
+
+	exynos_dp_enable_scramble(dp, 1);
+	exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
+	exynos_dp_enable_enhanced_mode(dp, 1);
+
+	exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
+	exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+
+	exynos_dp_init_video(dp);
+	exynos_dp_config_video(dp, dp->video_info);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_dp_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
+};
+
+static struct platform_driver exynos_dp_driver = {
+	.probe		= exynos_dp_probe,
+	.remove		= __devexit_p(exynos_dp_remove),
+	.driver		= {
+		.name	= "exynos-dp",
+		.owner	= THIS_MODULE,
+		.pm	= &exynos_dp_pm_ops,
+	},
+};
+
+module_platform_driver(exynos_dp_driver);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung SoC DP Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
new file mode 100644
index 00000000000..90ceaca0fa2
--- /dev/null
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -0,0 +1,206 @@
+/*
+ * Header file for Samsung DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _EXYNOS_DP_CORE_H
+#define _EXYNOS_DP_CORE_H
+
+struct link_train {
+	int eq_loop;
+	int cr_loop[4];
+
+	u8 link_rate;
+	u8 lane_count;
+	u8 training_lane[4];
+
+	enum link_training_state lt_state;
+};
+
+struct exynos_dp_device {
+	struct device		*dev;
+	struct resource		*res;
+	struct clk		*clock;
+	unsigned int		irq;
+	void __iomem		*reg_base;
+
+	struct video_info	*video_info;
+	struct link_train	link_train;
+};
+
+/* exynos_dp_reg.c */
+void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable);
+void exynos_dp_stop_video(struct exynos_dp_device *dp);
+void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
+void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
+void exynos_dp_reset(struct exynos_dp_device *dp);
+void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
+u32 exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp);
+void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable);
+void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
+				enum analog_power_block block,
+				bool enable);
+void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
+void exynos_dp_init_hpd(struct exynos_dp_device *dp);
+void exynos_dp_reset_aux(struct exynos_dp_device *dp);
+void exynos_dp_init_aux(struct exynos_dp_device *dp);
+int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
+void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
+int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
+int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned char data);
+int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned char *data);
+int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char data[]);
+int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char data[]);
+int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr);
+int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr,
+				unsigned int *data);
+int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char edid[]);
+void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
+void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
+void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
+void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
+void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
+void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
+void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
+void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
+void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable);
+void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
+				 enum pattern_set pattern);
+void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level);
+void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level);
+void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level);
+void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level);
+void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
+				u32 training_lane);
+void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
+				u32 training_lane);
+void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
+				u32 training_lane);
+void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
+				u32 training_lane);
+u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
+u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
+u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
+u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
+void exynos_dp_reset_macro(struct exynos_dp_device *dp);
+int exynos_dp_init_video(struct exynos_dp_device *dp);
+
+void exynos_dp_set_video_color_format(struct exynos_dp_device *dp,
+				u32 color_depth,
+				u32 color_space,
+				u32 dynamic_range,
+				u32 ycbcr_coeff);
+int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
+void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
+			enum clock_recovery_m_value_type type,
+			u32 m_value,
+			u32 n_value);
+void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
+void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
+void exynos_dp_start_video(struct exynos_dp_device *dp);
+int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
+void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
+			struct video_info *video_info);
+void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
+void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR			0x50
+#define I2C_E_EDID_DEVICE_ADDR			0x30
+
+#define EDID_BLOCK_LENGTH			0x80
+#define EDID_HEADER_PATTERN			0x00
+#define EDID_EXTENSION_FLAG			0x7e
+#define EDID_CHECKSUM				0x7f
+
+/* Definition for DPCD Register */
+#define DPCD_ADDR_DPCD_REV			0x0000
+#define DPCD_ADDR_MAX_LINK_RATE			0x0001
+#define DPCD_ADDR_MAX_LANE_COUNT		0x0002
+#define DPCD_ADDR_LINK_BW_SET			0x0100
+#define DPCD_ADDR_LANE_COUNT_SET		0x0101
+#define DPCD_ADDR_TRAINING_PATTERN_SET		0x0102
+#define DPCD_ADDR_TRAINING_LANE0_SET		0x0103
+#define DPCD_ADDR_LANE0_1_STATUS		0x0202
+#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED	0x0204
+#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1	0x0206
+#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3	0x0207
+#define DPCD_ADDR_TEST_REQUEST			0x0218
+#define DPCD_ADDR_TEST_RESPONSE			0x0260
+#define DPCD_ADDR_TEST_EDID_CHECKSUM		0x0261
+#define DPCD_ADDR_SINK_POWER_STATE		0x0600
+
+/* DPCD_ADDR_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x)		(((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x)			((x) & 0x1f)
+
+/* DPCD_ADDR_LANE_COUNT_SET */
+#define DPCD_ENHANCED_FRAME_EN			(0x1 << 7)
+#define DPCD_LANE_COUNT_SET(x)			((x) & 0x1f)
+
+/* DPCD_ADDR_TRAINING_PATTERN_SET */
+#define DPCD_SCRAMBLING_DISABLED		(0x1 << 5)
+#define DPCD_SCRAMBLING_ENABLED			(0x0 << 5)
+#define DPCD_TRAINING_PATTERN_2			(0x2 << 0)
+#define DPCD_TRAINING_PATTERN_1			(0x1 << 0)
+#define DPCD_TRAINING_PATTERN_DISABLED		(0x0 << 0)
+
+/* DPCD_ADDR_TRAINING_LANE0_SET */
+#define DPCD_MAX_PRE_EMPHASIS_REACHED		(0x1 << 5)
+#define DPCD_PRE_EMPHASIS_SET(x)		(((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x)		(((x) >> 3) & 0x3)
+#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0	(0x0 << 3)
+#define DPCD_MAX_SWING_REACHED			(0x1 << 2)
+#define DPCD_VOLTAGE_SWING_SET(x)		(((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x)		(((x) >> 0) & 0x3)
+#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0	(0x0 << 0)
+
+/* DPCD_ADDR_LANE0_1_STATUS */
+#define DPCD_LANE_SYMBOL_LOCKED			(0x1 << 2)
+#define DPCD_LANE_CHANNEL_EQ_DONE		(0x1 << 1)
+#define DPCD_LANE_CR_DONE			(0x1 << 0)
+#define DPCD_CHANNEL_EQ_BITS			(DPCD_LANE_CR_DONE|	\
+						 DPCD_LANE_CHANNEL_EQ_DONE|\
+						 DPCD_LANE_SYMBOL_LOCKED)
+
+/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
+#define DPCD_LINK_STATUS_UPDATED		(0x1 << 7)
+#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED	(0x1 << 6)
+#define DPCD_INTERLANE_ALIGN_DONE		(0x1 << 0)
+
+/* DPCD_ADDR_TEST_REQUEST */
+#define DPCD_TEST_EDID_READ			(0x1 << 2)
+
+/* DPCD_ADDR_TEST_RESPONSE */
+#define DPCD_TEST_EDID_CHECKSUM_WRITE		(0x1 << 2)
+
+/* DPCD_ADDR_SINK_POWER_STATE */
+#define DPCD_SET_POWER_STATE_D0			(0x1 << 0)
+#define DPCD_SET_POWER_STATE_D4			(0x2 << 0)
+
+#endif /* _EXYNOS_DP_CORE_H */
diff --git a/drivers/video/exynos/exynos_dp_reg.c b/drivers/video/exynos/exynos_dp_reg.c
new file mode 100644
index 00000000000..6548afa0e3d
--- /dev/null
+++ b/drivers/video/exynos/exynos_dp_reg.c
@@ -0,0 +1,1173 @@
+/*
+ * Samsung DP (Display port) register interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <video/exynos_dp.h>
+
+#include <plat/cpu.h>
+
+#include "exynos_dp_core.h"
+#include "exynos_dp_reg.h"
+
+#define COMMON_INT_MASK_1 (0)
+#define COMMON_INT_MASK_2 (0)
+#define COMMON_INT_MASK_3 (0)
+#define COMMON_INT_MASK_4 (0)
+#define INT_STA_MASK (0)
+
+void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+		reg |= HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+	} else {
+		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+		reg &= ~HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+	}
+}
+
+void exynos_dp_stop_video(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+	reg &= ~VIDEO_EN;
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+}
+
+void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable)
+		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
+			LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
+	else
+		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+			LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+	writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP);
+}
+
+void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
+{
+	/* Set interrupt pin assertion polarity as high */
+	writel(INT_POL, dp->reg_base + EXYNOS_DP_INT_CTL);
+
+	/* Clear pending regisers */
+	writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
+	writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2);
+	writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3);
+	writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
+	writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA);
+
+	/* 0:mask,1: unmask */
+	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
+	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
+	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
+	writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
+	writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
+}
+
+void exynos_dp_reset(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET);
+
+	exynos_dp_stop_video(dp);
+	exynos_dp_enable_video_mute(dp, 0);
+
+	reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+		AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+		HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
+
+	reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+		SERDES_FIFO_FUNC_EN_N |
+		LS_CLK_DOMAIN_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+
+	udelay(20);
+
+	exynos_dp_lane_swap(dp, 0);
+
+	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
+	writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
+	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+	writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+
+	writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL);
+	writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL);
+
+	writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L);
+	writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H);
+
+	writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL);
+
+	writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST);
+
+	writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD);
+	writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN);
+
+	writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH);
+	writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH);
+
+	writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+
+	exynos_dp_init_interrupt(dp);
+}
+
+void exynos_dp_config_interrupt(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = COMMON_INT_MASK_1;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
+
+	reg = COMMON_INT_MASK_2;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
+
+	reg = COMMON_INT_MASK_3;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
+
+	reg = COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
+
+	reg = INT_STA_MASK;
+	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
+}
+
+u32 exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
+	if (reg & PLL_LOCK)
+		return PLL_LOCKED;
+	else
+		return PLL_UNLOCKED;
+}
+
+void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
+		reg |= DP_PLL_PD;
+		writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
+	} else {
+		reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
+		reg &= ~DP_PLL_PD;
+		writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
+	}
+}
+
+void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
+				enum analog_power_block block,
+				bool enable)
+{
+	u32 reg;
+
+	switch (block) {
+	case AUX_BLOCK:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= AUX_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~AUX_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case CH0_BLOCK:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= CH0_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~CH0_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case CH1_BLOCK:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= CH1_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~CH1_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case CH2_BLOCK:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= CH2_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~CH2_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case CH3_BLOCK:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= CH3_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~CH3_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case ANALOG_TOTAL:
+		if (enable) {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg |= DP_PHY_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
+			reg &= ~DP_PHY_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	case POWER_ALL:
+		if (enable) {
+			reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
+				CH1_PD | CH0_PD;
+			writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
+		} else {
+			writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+	reg = PLL_LOCK_CHG;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
+	reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+	writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL);
+
+	/* Power up PLL */
+	if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED)
+		exynos_dp_set_pll_power_down(dp, 0);
+
+	/* Enable Serdes FIFO function and Link symbol clock domain module */
+	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+	reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+		| AUX_FUNC_EN_N);
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+}
+
+void exynos_dp_init_hpd(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = HOTPLUG_CHG | HPD_LOST | PLUG;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
+
+	reg = INT_HPD;
+	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+	reg &= ~(F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+}
+
+void exynos_dp_reset_aux(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	/* Disable AUX channel module */
+	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+	reg |= AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+}
+
+void exynos_dp_init_aux(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	/* Clear inerrupts related to AUX channel */
+	reg = RPLY_RECEIV | AUX_ERR;
+	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
+
+	exynos_dp_reset_aux(dp);
+
+	/* Disable AUX transaction H/W retry */
+	reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)|
+		AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+	writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL) ;
+
+	/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+	reg = DEFER_CTRL_EN | DEFER_COUNT(1);
+	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL);
+
+	/* Enable AUX channel module */
+	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+	reg &= ~AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
+}
+
+int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+	if (reg & HPD_STATUS)
+		return 0;
+
+	return -EINVAL;
+}
+
+void exynos_dp_enable_sw_function(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
+	reg &= ~SW_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
+}
+
+int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
+{
+	int reg;
+	int retval = 0;
+
+	/* Enable AUX CH operation */
+	reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
+	reg |= AUX_EN;
+	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
+
+	/* Is AUX CH command reply received? */
+	reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
+	while (!(reg & RPLY_RECEIV))
+		reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
+	if (reg & AUX_ERR) {
+		writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA);
+		return -EREMOTEIO;
+	}
+
+	/* Check AUX CH error access status */
+	reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA);
+	if ((reg & AUX_STATUS_MASK) != 0) {
+		dev_err(dp->dev, "AUX CH error happens: %d\n\n",
+			reg & AUX_STATUS_MASK);
+		return -EREMOTEIO;
+	}
+
+	return retval;
+}
+
+int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned char data)
+{
+	u32 reg;
+	int i;
+	int retval;
+
+	for (i = 0; i < 3; i++) {
+		/* Clear AUX CH data buffer */
+		reg = BUF_CLR;
+		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+		/* Select DPCD device address */
+		reg = AUX_ADDR_7_0(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
+		reg = AUX_ADDR_15_8(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
+		reg = AUX_ADDR_19_16(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
+
+		/* Write data buffer */
+		reg = (unsigned int)data;
+		writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
+
+		/*
+		 * Set DisplayPort transaction and write 1 byte
+		 * If bit 3 is 1, DisplayPort transaction.
+		 * If Bit 3 is 0, I2C transaction.
+		 */
+		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+		/* Start AUX transaction */
+		retval = exynos_dp_start_aux_transaction(dp);
+		if (retval == 0)
+			break;
+		else
+			dev_err(dp->dev, "Aux Transaction fail!\n");
+	}
+
+	return retval;
+}
+
+int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned char *data)
+{
+	u32 reg;
+	int i;
+	int retval;
+
+	for (i = 0; i < 10; i++) {
+		/* Clear AUX CH data buffer */
+		reg = BUF_CLR;
+		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+		/* Select DPCD device address */
+		reg = AUX_ADDR_7_0(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
+		reg = AUX_ADDR_15_8(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
+		reg = AUX_ADDR_19_16(reg_addr);
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
+
+		/*
+		 * Set DisplayPort transaction and read 1 byte
+		 * If bit 3 is 1, DisplayPort transaction.
+		 * If Bit 3 is 0, I2C transaction.
+		 */
+		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+		/* Start AUX transaction */
+		retval = exynos_dp_start_aux_transaction(dp);
+		if (retval == 0)
+			break;
+		else
+			dev_err(dp->dev, "Aux Transaction fail!\n");
+	}
+
+	/* Read data buffer */
+	reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
+	*data = (unsigned char)(reg & 0xff);
+
+	return retval;
+}
+
+int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char data[])
+{
+	u32 reg;
+	unsigned int start_offset;
+	unsigned int cur_data_count;
+	unsigned int cur_data_idx;
+	int i;
+	int retval = 0;
+
+	/* Clear AUX CH data buffer */
+	reg = BUF_CLR;
+	writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+	start_offset = 0;
+	while (start_offset < count) {
+		/* Buffer size of AUX CH is 16 * 4bytes */
+		if ((count - start_offset) > 16)
+			cur_data_count = 16;
+		else
+			cur_data_count = count - start_offset;
+
+		for (i = 0; i < 10; i++) {
+			/* Select DPCD device address */
+			reg = AUX_ADDR_7_0(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
+			reg = AUX_ADDR_15_8(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
+			reg = AUX_ADDR_19_16(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
+
+			for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+			     cur_data_idx++) {
+				reg = data[start_offset + cur_data_idx];
+				writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0
+							  + 4 * cur_data_idx);
+			}
+
+			/*
+			 * Set DisplayPort transaction and write
+			 * If bit 3 is 1, DisplayPort transaction.
+			 * If Bit 3 is 0, I2C transaction.
+			 */
+			reg = AUX_LENGTH(cur_data_count) |
+				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+			/* Start AUX transaction */
+			retval = exynos_dp_start_aux_transaction(dp);
+			if (retval == 0)
+				break;
+			else
+				dev_err(dp->dev, "Aux Transaction fail!\n");
+		}
+
+		start_offset += cur_data_count;
+	}
+
+	return retval;
+}
+
+int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char data[])
+{
+	u32 reg;
+	unsigned int start_offset;
+	unsigned int cur_data_count;
+	unsigned int cur_data_idx;
+	int i;
+	int retval = 0;
+
+	/* Clear AUX CH data buffer */
+	reg = BUF_CLR;
+	writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+	start_offset = 0;
+	while (start_offset < count) {
+		/* Buffer size of AUX CH is 16 * 4bytes */
+		if ((count - start_offset) > 16)
+			cur_data_count = 16;
+		else
+			cur_data_count = count - start_offset;
+
+		/* AUX CH Request Transaction process */
+		for (i = 0; i < 10; i++) {
+			/* Select DPCD device address */
+			reg = AUX_ADDR_7_0(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
+			reg = AUX_ADDR_15_8(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
+			reg = AUX_ADDR_19_16(reg_addr + start_offset);
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
+
+			/*
+			 * Set DisplayPort transaction and read
+			 * If bit 3 is 1, DisplayPort transaction.
+			 * If Bit 3 is 0, I2C transaction.
+			 */
+			reg = AUX_LENGTH(cur_data_count) |
+				AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+			/* Start AUX transaction */
+			retval = exynos_dp_start_aux_transaction(dp);
+			if (retval == 0)
+				break;
+			else
+				dev_err(dp->dev, "Aux Transaction fail!\n");
+		}
+
+		for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+		    cur_data_idx++) {
+			reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
+						 + 4 * cur_data_idx);
+			data[start_offset + cur_data_idx] =
+				(unsigned char)reg;
+		}
+
+		start_offset += cur_data_count;
+	}
+
+	return retval;
+}
+
+int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr)
+{
+	u32 reg;
+	int retval;
+
+	/* Set EDID device address */
+	reg = device_addr;
+	writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
+	writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
+	writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
+
+	/* Set offset from base address of EDID device */
+	writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
+
+	/*
+	 * Set I2C transaction and write address
+	 * If bit 3 is 1, DisplayPort transaction.
+	 * If Bit 3 is 0, I2C transaction.
+	 */
+	reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+		AUX_TX_COMM_WRITE;
+	writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+	/* Start AUX transaction */
+	retval = exynos_dp_start_aux_transaction(dp);
+	if (retval != 0)
+		dev_err(dp->dev, "Aux Transaction fail!\n");
+
+	return retval;
+}
+
+int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr,
+				unsigned int *data)
+{
+	u32 reg;
+	int i;
+	int retval;
+
+	for (i = 0; i < 10; i++) {
+		/* Clear AUX CH data buffer */
+		reg = BUF_CLR;
+		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+		/* Select EDID device */
+		retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr);
+		if (retval != 0) {
+			dev_err(dp->dev, "Select EDID device fail!\n");
+			continue;
+		}
+
+		/*
+		 * Set I2C transaction and read data
+		 * If bit 3 is 1, DisplayPort transaction.
+		 * If Bit 3 is 0, I2C transaction.
+		 */
+		reg = AUX_TX_COMM_I2C_TRANSACTION |
+			AUX_TX_COMM_READ;
+		writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
+
+		/* Start AUX transaction */
+		retval = exynos_dp_start_aux_transaction(dp);
+		if (retval == 0)
+			break;
+		else
+			dev_err(dp->dev, "Aux Transaction fail!\n");
+	}
+
+	/* Read data */
+	if (retval == 0)
+		*data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
+
+	return retval;
+}
+
+int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
+				unsigned int device_addr,
+				unsigned int reg_addr,
+				unsigned int count,
+				unsigned char edid[])
+{
+	u32 reg;
+	unsigned int i, j;
+	unsigned int cur_data_idx;
+	unsigned int defer = 0;
+	int retval = 0;
+
+	for (i = 0; i < count; i += 16) {
+		for (j = 0; j < 100; j++) {
+			/* Clear AUX CH data buffer */
+			reg = BUF_CLR;
+			writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
+
+			/* Set normal AUX CH command */
+			reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
+			reg &= ~ADDR_ONLY;
+			writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
+
+			/*
+			 * If Rx sends defer, Tx sends only reads
+			 * request without sending addres
+			 */
+			if (!defer)
+				retval = exynos_dp_select_i2c_device(dp,
+						device_addr, reg_addr + i);
+			else
+				defer = 0;
+
+			if (retval == 0) {
+				/*
+				 * Set I2C transaction and write data
+				 * If bit 3 is 1, DisplayPort transaction.
+				 * If Bit 3 is 0, I2C transaction.
+				 */
+				reg = AUX_LENGTH(16) |
+					AUX_TX_COMM_I2C_TRANSACTION |
+					AUX_TX_COMM_READ;
+				writel(reg, dp->reg_base +
+					EXYNOS_DP_AUX_CH_CTL_1);
+
+				/* Start AUX transaction */
+				retval = exynos_dp_start_aux_transaction(dp);
+				if (retval == 0)
+					break;
+				else
+					dev_err(dp->dev, "Aux Transaction fail!\n");
+			}
+			/* Check if Rx sends defer */
+			reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
+			if (reg == AUX_RX_COMM_AUX_DEFER ||
+				reg == AUX_RX_COMM_I2C_DEFER) {
+				dev_err(dp->dev, "Defer: %d\n\n", reg);
+				defer = 1;
+			}
+		}
+
+		for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+			reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
+						 + 4 * cur_data_idx);
+			edid[i + cur_data_idx] = (unsigned char)reg;
+		}
+	}
+
+	return retval;
+}
+
+void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype)
+{
+	u32 reg;
+
+	reg = bwtype;
+	if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
+		writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET);
+}
+
+void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET);
+	*bwtype = reg;
+}
+
+void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count)
+{
+	u32 reg;
+
+	reg = count;
+	writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
+}
+
+void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
+	*count = reg;
+}
+
+void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+		reg |= ENHANCED;
+		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+	} else {
+		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+		reg &= ~ENHANCED;
+		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+	}
+}
+
+void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
+				 enum pattern_set pattern)
+{
+	u32 reg;
+
+	switch (pattern) {
+	case PRBS7:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+		break;
+	case D10_2:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN1:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN2:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+		break;
+	case DP_NONE:
+		reg = SCRAMBLING_ENABLE |
+			LINK_QUAL_PATTERN_SET_DISABLE |
+			SW_TRAINING_PATTERN_SET_NORMAL;
+		writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+		break;
+	default:
+		break;
+	}
+}
+
+void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level)
+{
+	u32 reg;
+
+	reg = level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level)
+{
+	u32 reg;
+
+	reg = level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level)
+{
+	u32 reg;
+
+	reg = level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level)
+{
+	u32 reg;
+
+	reg = level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
+					u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
+					u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
+					u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
+					u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
+}
+
+u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
+	return reg;
+}
+
+u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
+	return reg;
+}
+
+u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
+	return reg;
+}
+
+u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
+	return reg;
+}
+
+void exynos_dp_reset_macro(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST);
+	reg |= MACRO_RST;
+	writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
+
+	/* 10 us is the minimum reset time. */
+	udelay(10);
+
+	reg &= ~MACRO_RST;
+	writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
+}
+
+int exynos_dp_init_video(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+	writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
+
+	reg = CHA_CRI(4) | CHA_CTRL;
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+
+	reg = VID_HRES_TH(2) | VID_VRES_TH(0);
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
+
+	return 0;
+}
+
+void exynos_dp_set_video_color_format(struct exynos_dp_device *dp,
+			u32 color_depth,
+			u32 color_space,
+			u32 dynamic_range,
+			u32 ycbcr_coeff)
+{
+	u32 reg;
+
+	/* Configure the input color depth, color space, dynamic range */
+	reg = (dynamic_range << IN_D_RANGE_SHIFT) |
+		(color_depth << IN_BPC_SHIFT) |
+		(color_space << IN_COLOR_F_SHIFT);
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
+
+	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
+	reg &= ~IN_YC_COEFFI_MASK;
+	if (ycbcr_coeff)
+		reg |= IN_YC_COEFFI_ITU709;
+	else
+		reg |= IN_YC_COEFFI_ITU601;
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
+}
+
+int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
+
+	if (!(reg & DET_STA)) {
+		dev_dbg(dp->dev, "Input stream clock not detected.\n");
+		return -EINVAL;
+	}
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
+	dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
+
+	if (reg & CHA_STA) {
+		dev_dbg(dp->dev, "Input stream clk is changing\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
+		enum clock_recovery_m_value_type type,
+		u32 m_value,
+		u32 n_value)
+{
+	u32 reg;
+
+	if (type == REGISTER_M) {
+		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+		reg |= FIX_M_VID;
+		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+		reg = m_value & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0);
+		reg = (m_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1);
+		reg = (m_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2);
+
+		reg = n_value & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0);
+		reg = (n_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1);
+		reg = (n_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2);
+	} else  {
+		reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+		reg &= ~FIX_M_VID;
+		writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
+
+		writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0);
+		writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1);
+		writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2);
+	}
+}
+
+void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type)
+{
+	u32 reg;
+
+	if (type == VIDEO_TIMING_FROM_CAPTURE) {
+		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+		reg &= ~FORMAT_SEL;
+		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+	} else {
+		reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+		reg |= FORMAT_SEL;
+		writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+	}
+}
+
+void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
+		writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+	} else {
+		reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MODE_SLAVE_MODE;
+		writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+	}
+}
+
+void exynos_dp_start_video(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+	reg |= VIDEO_EN;
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
+}
+
+int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
+	if (!(reg & STRM_VALID)) {
+		dev_dbg(dp->dev, "Input video stream is not detected.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
+			struct video_info *video_info)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
+	reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
+	reg |= MASTER_VID_FUNC_EN_N;
+	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+	reg &= ~INTERACE_SCAN_CFG;
+	reg |= (video_info->interlaced << 2);
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+	reg &= ~VSYNC_POLARITY_CFG;
+	reg |= (video_info->v_sync_polarity << 1);
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+	reg &= ~HSYNC_POLARITY_CFG;
+	reg |= (video_info->h_sync_polarity << 0);
+	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
+
+	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+	writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
+}
+
+void exynos_dp_enable_scrambling(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+	reg &= ~SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+}
+
+void exynos_dp_disable_scrambling(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+	reg |= SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
+}
diff --git a/drivers/video/exynos/exynos_dp_reg.h b/drivers/video/exynos/exynos_dp_reg.h
new file mode 100644
index 00000000000..42f608e2a43
--- /dev/null
+++ b/drivers/video/exynos/exynos_dp_reg.h
@@ -0,0 +1,335 @@
+/*
+ * Register definition file for Samsung DP driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EXYNOS_DP_REG_H
+#define _EXYNOS_DP_REG_H
+
+#define EXYNOS_DP_TX_SW_RESET			0x14
+#define EXYNOS_DP_FUNC_EN_1			0x18
+#define EXYNOS_DP_FUNC_EN_2			0x1C
+#define EXYNOS_DP_VIDEO_CTL_1			0x20
+#define EXYNOS_DP_VIDEO_CTL_2			0x24
+#define EXYNOS_DP_VIDEO_CTL_3			0x28
+
+#define EXYNOS_DP_VIDEO_CTL_8			0x3C
+#define EXYNOS_DP_VIDEO_CTL_10			0x44
+
+#define EXYNOS_DP_LANE_MAP			0x35C
+
+#define EXYNOS_DP_AUX_HW_RETRY_CTL		0x390
+
+#define EXYNOS_DP_COMMON_INT_STA_1		0x3C4
+#define EXYNOS_DP_COMMON_INT_STA_2		0x3C8
+#define EXYNOS_DP_COMMON_INT_STA_3		0x3CC
+#define EXYNOS_DP_COMMON_INT_STA_4		0x3D0
+#define EXYNOS_DP_INT_STA			0x3DC
+#define EXYNOS_DP_COMMON_INT_MASK_1		0x3E0
+#define EXYNOS_DP_COMMON_INT_MASK_2		0x3E4
+#define EXYNOS_DP_COMMON_INT_MASK_3		0x3E8
+#define EXYNOS_DP_COMMON_INT_MASK_4		0x3EC
+#define EXYNOS_DP_INT_STA_MASK			0x3F8
+#define EXYNOS_DP_INT_CTL			0x3FC
+
+#define EXYNOS_DP_SYS_CTL_1			0x600
+#define EXYNOS_DP_SYS_CTL_2			0x604
+#define EXYNOS_DP_SYS_CTL_3			0x608
+#define EXYNOS_DP_SYS_CTL_4			0x60C
+
+#define EXYNOS_DP_PKT_SEND_CTL			0x640
+#define EXYNOS_DP_HDCP_CTL			0x648
+
+#define EXYNOS_DP_LINK_BW_SET			0x680
+#define EXYNOS_DP_LANE_COUNT_SET		0x684
+#define EXYNOS_DP_TRAINING_PTN_SET		0x688
+#define EXYNOS_DP_LN0_LINK_TRAINING_CTL		0x68C
+#define EXYNOS_DP_LN1_LINK_TRAINING_CTL		0x690
+#define EXYNOS_DP_LN2_LINK_TRAINING_CTL		0x694
+#define EXYNOS_DP_LN3_LINK_TRAINING_CTL		0x698
+
+#define EXYNOS_DP_DEBUG_CTL			0x6C0
+#define EXYNOS_DP_HPD_DEGLITCH_L		0x6C4
+#define EXYNOS_DP_HPD_DEGLITCH_H		0x6C8
+#define EXYNOS_DP_LINK_DEBUG_CTL		0x6E0
+
+#define EXYNOS_DP_M_VID_0			0x700
+#define EXYNOS_DP_M_VID_1			0x704
+#define EXYNOS_DP_M_VID_2			0x708
+#define EXYNOS_DP_N_VID_0			0x70C
+#define EXYNOS_DP_N_VID_1			0x710
+#define EXYNOS_DP_N_VID_2			0x714
+
+#define EXYNOS_DP_PLL_CTL			0x71C
+#define EXYNOS_DP_PHY_PD			0x720
+#define EXYNOS_DP_PHY_TEST			0x724
+
+#define EXYNOS_DP_VIDEO_FIFO_THRD		0x730
+#define EXYNOS_DP_AUDIO_MARGIN			0x73C
+
+#define EXYNOS_DP_M_VID_GEN_FILTER_TH		0x764
+#define EXYNOS_DP_M_AUD_GEN_FILTER_TH		0x778
+#define EXYNOS_DP_AUX_CH_STA			0x780
+#define EXYNOS_DP_AUX_CH_DEFER_CTL		0x788
+#define EXYNOS_DP_AUX_RX_COMM			0x78C
+#define EXYNOS_DP_BUFFER_DATA_CTL		0x790
+#define EXYNOS_DP_AUX_CH_CTL_1			0x794
+#define EXYNOS_DP_AUX_ADDR_7_0			0x798
+#define EXYNOS_DP_AUX_ADDR_15_8			0x79C
+#define EXYNOS_DP_AUX_ADDR_19_16		0x7A0
+#define EXYNOS_DP_AUX_CH_CTL_2			0x7A4
+
+#define EXYNOS_DP_BUF_DATA_0			0x7C0
+
+#define EXYNOS_DP_SOC_GENERAL_CTL		0x800
+
+/* EXYNOS_DP_TX_SW_RESET */
+#define RESET_DP_TX				(0x1 << 0)
+
+/* EXYNOS_DP_FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N			(0x1 << 7)
+#define SLAVE_VID_FUNC_EN_N			(0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
+#define AUD_FUNC_EN_N				(0x1 << 3)
+#define HDCP_FUNC_EN_N				(0x1 << 2)
+#define CRC_FUNC_EN_N				(0x1 << 1)
+#define SW_FUNC_EN_N				(0x1 << 0)
+
+/* EXYNOS_DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N				(0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_1 */
+#define VIDEO_EN				(0x1 << 7)
+#define HDCP_VIDEO_MUTE				(0x1 << 6)
+
+/* EXYNOS_DP_VIDEO_CTL_1 */
+#define IN_D_RANGE_MASK				(0x1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(0x1 << 7)
+#define IN_D_RANGE_VESA				(0x0 << 7)
+#define IN_BPC_MASK				(0x7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(0x3 << 4)
+#define IN_BPC_10_BITS				(0x2 << 4)
+#define IN_BPC_8_BITS				(0x1 << 4)
+#define IN_BPC_6_BITS				(0x0 << 4)
+#define IN_COLOR_F_MASK				(0x3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(0x2 << 0)
+#define IN_COLOR_F_YCBCR422			(0x1 << 0)
+#define IN_COLOR_F_RGB				(0x0 << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK			(0x1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(0x1 << 7)
+#define IN_YC_COEFFI_ITU601			(0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
+
+/* EXYNOS_DP_VIDEO_CTL_8 */
+#define VID_HRES_TH(x)				(((x) & 0xf) << 4)
+#define VID_VRES_TH(x)				(((x) & 0xf) << 0)
+
+/* EXYNOS_DP_VIDEO_CTL_10 */
+#define FORMAT_SEL				(0x1 << 4)
+#define INTERACE_SCAN_CFG			(0x1 << 2)
+#define VSYNC_POLARITY_CFG			(0x1 << 1)
+#define HSYNC_POLARITY_CFG			(0x1 << 0)
+
+/* EXYNOS_DP_LANE_MAP */
+#define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2			(0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3			(0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0			(0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1			(0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2			(0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3			(0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0			(0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1			(0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2			(0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3			(0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0			(0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+
+/* EXYNOS_DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x)	(((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK		(0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS	(0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS	(0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS	(0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS	(0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x)		(((x) & 0x7) << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_1 */
+#define VSYNC_DET				(0x1 << 7)
+#define PLL_LOCK_CHG				(0x1 << 6)
+#define SPDIF_ERR				(0x1 << 5)
+#define SPDIF_UNSTBL				(0x1 << 4)
+#define VID_FORMAT_CHG				(0x1 << 3)
+#define AUD_CLK_CHG				(0x1 << 2)
+#define VID_CLK_CHG				(0x1 << 1)
+#define SW_INT					(0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_2 */
+#define ENC_EN_CHG				(0x1 << 6)
+#define HW_BKSV_RDY				(0x1 << 3)
+#define HW_SHA_DONE				(0x1 << 2)
+#define HW_AUTH_STATE_CHG			(0x1 << 1)
+#define HW_AUTH_DONE				(0x1 << 0)
+
+/* EXYNOS_DP_COMMON_INT_STA_3 */
+#define AFIFO_UNDER				(0x1 << 7)
+#define AFIFO_OVER				(0x1 << 6)
+#define R0_CHK_FLAG				(0x1 << 5)
+
+/* EXYNOS_DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE				(0x1 << 7)
+#define PSR_INACTIVE				(0x1 << 6)
+#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
+#define HOTPLUG_CHG				(0x1 << 2)
+#define HPD_LOST				(0x1 << 1)
+#define PLUG					(0x1 << 0)
+
+/* EXYNOS_DP_INT_STA */
+#define INT_HPD					(0x1 << 6)
+#define HW_TRAINING_FINISH			(0x1 << 5)
+#define RPLY_RECEIV				(0x1 << 1)
+#define AUX_ERR					(0x1 << 0)
+
+/* EXYNOS_DP_INT_CTL */
+#define SOFT_INT_CTRL				(0x1 << 2)
+#define INT_POL					(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_1 */
+#define DET_STA					(0x1 << 2)
+#define FORCE_DET				(0x1 << 1)
+#define DET_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_2 */
+#define CHA_CRI(x)				(((x) & 0xf) << 4)
+#define CHA_STA					(0x1 << 2)
+#define FORCE_CHA				(0x1 << 1)
+#define CHA_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* EXYNOS_DP_SYS_CTL_4 */
+#define FIX_M_AUD				(0x1 << 4)
+#define ENHANCED				(0x1 << 3)
+#define FIX_M_VID				(0x1 << 2)
+#define M_VID_UPDATE_CTRL			(0x3 << 0)
+
+/* EXYNOS_DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE				(0x1 << 9)
+#define HW_LINK_TRAINING_PATTERN		(0x1 << 8)
+#define SCRAMBLING_DISABLE			(0x1 << 5)
+#define SCRAMBLING_ENABLE			(0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL		(0x0 << 0)
+
+/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
+#define PRE_EMPHASIS_SET_SHIFT			(3)
+
+/* EXYNOS_DP_DEBUG_CTL */
+#define PLL_LOCK				(0x1 << 4)
+#define F_PLL_LOCK				(0x1 << 3)
+#define PLL_LOCK_CTRL				(0x1 << 2)
+#define PN_INV					(0x1 << 0)
+
+/* EXYNOS_DP_PLL_CTL */
+#define DP_PLL_PD				(0x1 << 7)
+#define DP_PLL_RESET				(0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT			(0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V			(0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V			(0x7 << 0)
+
+/* EXYNOS_DP_PHY_PD */
+#define DP_PHY_PD				(0x1 << 5)
+#define AUX_PD					(0x1 << 4)
+#define CH3_PD					(0x1 << 3)
+#define CH2_PD					(0x1 << 2)
+#define CH1_PD					(0x1 << 1)
+#define CH0_PD					(0x1 << 0)
+
+/* EXYNOS_DP_PHY_TEST */
+#define MACRO_RST				(0x1 << 5)
+#define CH1_TEST				(0x1 << 1)
+#define CH0_TEST				(0x1 << 0)
+
+/* EXYNOS_DP_AUX_CH_STA */
+#define AUX_BUSY				(0x1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* EXYNOS_DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN				(0x1 << 7)
+#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
+
+/* EXYNOS_DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
+
+/* EXYNOS_DP_BUFFER_DATA_CTL */
+#define BUF_CLR					(0x1 << 7)
+#define BUF_DATA_COUNT(x)			(((x) & 0x1f) << 0)
+
+/* EXYNOS_DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
+#define AUX_TX_COMM_MOT				(0x1 << 2)
+#define AUX_TX_COMM_WRITE			(0x0 << 0)
+#define AUX_TX_COMM_READ			(0x1 << 0)
+
+/* EXYNOS_DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
+
+/* EXYNOS_DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
+
+/* EXYNOS_DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY				(0x1 << 1)
+#define AUX_EN					(0x1 << 0)
+
+/* EXYNOS_DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE			(0x1 << 8)
+#define AUDIO_MODE_MASTER_MODE			(0x0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN		(0x1 << 4)
+#define VIDEO_MASTER_CLK_SEL			(0x1 << 2)
+#define VIDEO_MASTER_MODE_EN			(0x1 << 1)
+#define VIDEO_MODE_MASK				(0x1 << 0)
+#define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
+#define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
+
+#endif /* _EXYNOS_DP_REG_H */
diff --git a/include/video/exynos_dp.h b/include/video/exynos_dp.h
new file mode 100644
index 00000000000..8847a9d6dd4
--- /dev/null
+++ b/include/video/exynos_dp.h
@@ -0,0 +1,131 @@
+/*
+ * Samsung SoC DP device support
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EXYNOS_DP_H
+#define _EXYNOS_DP_H
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 4
+
+enum link_rate_type {
+	LINK_RATE_1_62GBPS = 0x06,
+	LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+	LANE_COUNT1 = 1,
+	LANE_COUNT2 = 2,
+	LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+	START,
+	CLOCK_RECOVERY,
+	EQUALIZER_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum pll_status {
+	PLL_UNLOCKED,
+	PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+struct video_info {
+	char *name;
+
+	bool h_sync_polarity;
+	bool v_sync_polarity;
+	bool interlaced;
+
+	enum color_space color_space;
+	enum dynamic_range dynamic_range;
+	enum color_coefficient ycbcr_coeff;
+	enum color_depth color_depth;
+
+	enum link_rate_type link_rate;
+	enum link_lane_count_type lane_count;
+};
+
+struct exynos_dp_platdata {
+	struct video_info *video_info;
+
+	void (*phy_init)(void);
+	void (*phy_exit)(void);
+};
+
+#endif /* _EXYNOS_DP_H */
-- 
cgit v1.2.3-70-g09d2


From 5dc5f61813a9c3ab7dd0a6982ad044834134db5a Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Thu, 12 Jan 2012 12:52:37 +0000
Subject: viafb: add initial EDID support

This patch adds support for using EDID data on CRT and DVP1 for
initial configuration if viafb_mode or viafb_mode1 are not present.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/via_aux.c      | 20 ++++++++++++++
 drivers/video/via/via_aux.h      |  6 ++++
 drivers/video/via/via_aux_edid.c | 59 +++++++++++++++++++++++++++++++++++++++-
 drivers/video/via/viafbdev.c     | 26 +++++++++++++-----
 4 files changed, 103 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/via_aux.c b/drivers/video/via/via_aux.c
index e728b9bec23..4a0a55cdac3 100644
--- a/drivers/video/via/via_aux.c
+++ b/drivers/video/via/via_aux.c
@@ -60,9 +60,29 @@ void via_aux_free(struct via_aux_bus *bus)
 		return;
 
 	list_for_each_entry_safe(pos, n, &bus->drivers, chain) {
+		if (pos->cleanup)
+			pos->cleanup(pos);
+
 		list_del(&pos->chain);
+		kfree(pos->data);
 		kfree(pos);
 	}
 
 	kfree(bus);
 }
+
+const struct fb_videomode *via_aux_get_preferred_mode(struct via_aux_bus *bus)
+{
+	struct via_aux_drv *pos;
+	const struct fb_videomode *mode = NULL;
+
+	if (!bus)
+		return NULL;
+
+	list_for_each_entry(pos, &bus->drivers, chain) {
+		if (pos->get_preferred_mode)
+			mode = pos->get_preferred_mode(pos);
+	}
+
+	return mode;
+}
diff --git a/drivers/video/via/via_aux.h b/drivers/video/via/via_aux.h
index 5a4867a2dcc..a8de3f038ce 100644
--- a/drivers/video/via/via_aux.h
+++ b/drivers/video/via/via_aux.h
@@ -27,6 +27,7 @@
 
 #include <linux/list.h>
 #include <linux/i2c.h>
+#include <linux/fb.h>
 
 
 struct via_aux_bus {
@@ -42,11 +43,16 @@ struct via_aux_drv {
 
 	const char *name;	/* human readable name of the driver */
 	void *data;		/* private data of this driver */
+
+	void (*cleanup)(struct via_aux_drv *drv);
+	const struct fb_videomode* (*get_preferred_mode)
+		(struct via_aux_drv *drv);
 };
 
 
 struct via_aux_bus *via_aux_probe(struct i2c_adapter *adap);
 void via_aux_free(struct via_aux_bus *bus);
+const struct fb_videomode *via_aux_get_preferred_mode(struct via_aux_bus *bus);
 
 
 static inline bool via_aux_add(struct via_aux_drv *drv)
diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/via/via_aux_edid.c
index 547bff53a44..03f7a41c8a3 100644
--- a/drivers/video/via/via_aux_edid.c
+++ b/drivers/video/via/via_aux_edid.c
@@ -22,18 +22,75 @@
  */
 
 #include <linux/slab.h>
+#include <linux/fb.h>
 #include "via_aux.h"
+#include "../edid.h"
 
 
 static const char *name = "EDID";
 
 
+static void query_edid(struct via_aux_drv *drv)
+{
+	struct fb_monspecs *spec = drv->data;
+	unsigned char edid[EDID_LENGTH];
+	bool valid = false;
+
+	if (spec)
+		fb_destroy_modedb(spec->modedb);
+	else
+		spec = kmalloc(sizeof(*spec), GFP_KERNEL);
+
+	spec->version = spec->revision = 0;
+	if (via_aux_read(drv, 0x00, edid, EDID_LENGTH)) {
+		fb_edid_to_monspecs(edid, spec);
+		valid = spec->version || spec->revision;
+	}
+
+	if (!valid) {
+		kfree(spec);
+		spec = NULL;
+	} else
+		printk(KERN_DEBUG "EDID: %s %s\n", spec->manufacturer, spec->monitor);
+
+	drv->data = spec;
+}
+
+static const struct fb_videomode *get_preferred_mode(struct via_aux_drv *drv)
+{
+	struct fb_monspecs *spec = drv->data;
+	int i;
+
+	if (!spec || !spec->modedb || !(spec->misc & FB_MISC_1ST_DETAIL))
+		return NULL;
+
+	for (i = 0; i < spec->modedb_len; i++) {
+		if (spec->modedb[i].flag & FB_MODE_IS_FIRST &&
+			spec->modedb[i].flag & FB_MODE_IS_DETAILED)
+			return &spec->modedb[i];
+	}
+
+	return NULL;
+}
+
+static void cleanup(struct via_aux_drv *drv)
+{
+	struct fb_monspecs *spec = drv->data;
+
+	if (spec)
+		fb_destroy_modedb(spec->modedb);
+}
+
 void via_aux_edid_probe(struct via_aux_bus *bus)
 {
 	struct via_aux_drv drv = {
 		.bus	=	bus,
 		.addr	=	0x50,
-		.name	=	name};
+		.name	=	name,
+		.cleanup	=	cleanup,
+		.get_preferred_mode	=	get_preferred_mode};
+
+	query_edid(&drv);
 
 	/* as EDID devices can be connected/disconnected just add the driver */
 	via_aux_add(&drv);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 6d5b6492323..47911658f68 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -1671,12 +1671,23 @@ static void viafb_remove_proc(struct viafb_shared *shared)
 }
 #undef IS_VT1636
 
-static int parse_mode(const char *str, u32 *xres, u32 *yres)
+static int parse_mode(const char *str, u32 devices, u32 *xres, u32 *yres)
 {
+	const struct fb_videomode *mode = NULL;
 	char *ptr;
 
 	if (!str) {
-		if (machine_is_olpc()) {
+		if (devices == VIA_CRT)
+			mode = via_aux_get_preferred_mode(
+				viaparinfo->shared->i2c_26);
+		else if (devices == VIA_DVP1)
+			mode = via_aux_get_preferred_mode(
+				viaparinfo->shared->i2c_31);
+
+		if (mode) {
+			*xres = mode->xres;
+			*yres = mode->yres;
+		} else if (machine_is_olpc()) {
 			*xres = 1200;
 			*yres = 900;
 		} else {
@@ -1829,10 +1840,11 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 			viafb_second_size * 1024 * 1024;
 	}
 
-	parse_mode(viafb_mode, &default_xres, &default_yres);
+	parse_mode(viafb_mode, viaparinfo->shared->iga1_devices,
+		&default_xres, &default_yres);
 	if (viafb_SAMM_ON == 1)
-		parse_mode(viafb_mode1, &viafb_second_xres,
-			&viafb_second_yres);
+		parse_mode(viafb_mode1, viaparinfo->shared->iga2_devices,
+			&viafb_second_xres, &viafb_second_yres);
 
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
@@ -2060,9 +2072,9 @@ int __init viafb_init(void)
 	if (r < 0)
 		return r;
 #endif
-	if (parse_mode(viafb_mode, &dummy_x, &dummy_y)
+	if (parse_mode(viafb_mode, 0, &dummy_x, &dummy_y)
 		|| !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh)
-		|| parse_mode(viafb_mode1, &dummy_x, &dummy_y)
+		|| parse_mode(viafb_mode1, 0, &dummy_x, &dummy_y)
 		|| !viafb_get_best_mode(dummy_x, dummy_y, viafb_refresh1)
 		|| viafb_bpp < 0 || viafb_bpp > 32
 		|| viafb_bpp1 < 0 || viafb_bpp1 > 32
-- 
cgit v1.2.3-70-g09d2


From 5350c65f4f15bbc111ffa629130d3f32cdd4ccf6 Mon Sep 17 00:00:00 2001
From: Ondrej Zary <linux@rainbow-software.org>
Date: Fri, 10 Feb 2012 18:59:17 +0100
Subject: Resurrect Intel740 driver: i740fb

This is a resurrection of an old (like 2.4.19) out-of-tree driver for
Intel740 graphics cards and adaptation for recent kernels. The old driver by
Andrey Ulanov is located at: http://sourceforge.net/projects/i740fbdev/files/

This is a new driver based on skeletonfb, using most of the low level HW code
from the old driver. The DDC code is completely new.

The driver was tested on two 8MB cards: Protac AG240D and Diamond Stealth II
G460.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/Kconfig    |   12 +
 drivers/video/Makefile   |    1 +
 drivers/video/i740_reg.h |  309 +++++++++++
 drivers/video/i740fb.c   | 1337 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1659 insertions(+)
 create mode 100644 drivers/video/i740_reg.h
 create mode 100644 drivers/video/i740fb.c

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e61d7ce3559..8951cbd2d2f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1123,6 +1123,18 @@ config FB_RIVA_BACKLIGHT
 	help
 	  Say Y here if you want to control the backlight of your display.
 
+config FB_I740
+	tristate "Intel740 support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FB_DDC
+	help
+	  This driver supports graphics cards based on Intel740 chip.
+
 config FB_I810
 	tristate "Intel 810/815 support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 274b04ebede..9356add945b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_FB_GRVGA)            += grvga.o
 obj-$(CONFIG_FB_PM2)              += pm2fb.o
 obj-$(CONFIG_FB_PM3)		  += pm3fb.o
 
+obj-$(CONFIG_FB_I740)		  += i740fb.o
 obj-$(CONFIG_FB_MATROX)		  += matrox/
 obj-$(CONFIG_FB_RIVA)		  += riva/
 obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
diff --git a/drivers/video/i740_reg.h b/drivers/video/i740_reg.h
new file mode 100644
index 00000000000..91bac76549d
--- /dev/null
+++ b/drivers/video/i740_reg.h
@@ -0,0 +1,309 @@
+/**************************************************************************
+
+Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+/*
+ * Authors:
+ *   Kevin E. Martin <kevin@precisioninsight.com>
+ */
+
+/* I/O register offsets */
+#define SRX VGA_SEQ_I
+#define GRX VGA_GFX_I
+#define ARX VGA_ATT_IW
+#define XRX 0x3D6
+#define MRX 0x3D2
+
+/* VGA Color Palette Registers */
+#define DACMASK		0x3C6
+#define DACSTATE	0x3C7
+#define DACRX		0x3C7
+#define DACWX		0x3C8
+#define DACDATA		0x3C9
+
+/* CRT Controller Registers (CRX) */
+#define START_ADDR_HI		0x0C
+#define START_ADDR_LO		0x0D
+#define VERT_SYNC_END		0x11
+#define EXT_VERT_TOTAL		0x30
+#define EXT_VERT_DISPLAY	0x31
+#define EXT_VERT_SYNC_START	0x32
+#define EXT_VERT_BLANK_START	0x33
+#define EXT_HORIZ_TOTAL		0x35
+#define EXT_HORIZ_BLANK		0x39
+#define EXT_START_ADDR		0x40
+#define EXT_START_ADDR_ENABLE	0x80
+#define EXT_OFFSET		0x41
+#define EXT_START_ADDR_HI	0x42
+#define INTERLACE_CNTL		0x70
+#define INTERLACE_ENABLE	0x80
+#define INTERLACE_DISABLE	0x00
+
+/* Miscellaneous Output Register */
+#define MSR_R		0x3CC
+#define MSR_W		0x3C2
+#define IO_ADDR_SELECT	0x01
+
+#define MDA_BASE	0x3B0
+#define CGA_BASE	0x3D0
+
+/* System Configuration Extension Registers (XRX) */
+#define IO_CTNL		0x09
+#define EXTENDED_ATTR_CNTL	0x02
+#define EXTENDED_CRTC_CNTL	0x01
+
+#define ADDRESS_MAPPING	0x0A
+#define PACKED_MODE_ENABLE	0x04
+#define LINEAR_MODE_ENABLE	0x02
+#define PAGE_MAPPING_ENABLE	0x01
+
+#define BITBLT_CNTL	0x20
+#define COLEXP_MODE		0x30
+#define COLEXP_8BPP		0x00
+#define COLEXP_16BPP		0x10
+#define COLEXP_24BPP		0x20
+#define COLEXP_RESERVED		0x30
+#define CHIP_RESET		0x02
+#define BITBLT_STATUS		0x01
+
+#define DISPLAY_CNTL	0x40
+#define VGA_WRAP_MODE		0x02
+#define VGA_WRAP_AT_256KB	0x00
+#define VGA_NO_WRAP		0x02
+#define GUI_MODE		0x01
+#define STANDARD_VGA_MODE	0x00
+#define HIRES_MODE		0x01
+
+#define DRAM_ROW_TYPE	0x50
+#define DRAM_ROW_0		0x07
+#define DRAM_ROW_0_SDRAM	0x00
+#define DRAM_ROW_0_EMPTY	0x07
+#define DRAM_ROW_1		0x38
+#define DRAM_ROW_1_SDRAM	0x00
+#define DRAM_ROW_1_EMPTY	0x38
+#define DRAM_ROW_CNTL_LO 0x51
+#define DRAM_CAS_LATENCY	0x10
+#define DRAM_RAS_TIMING		0x08
+#define DRAM_RAS_PRECHARGE	0x04
+#define DRAM_ROW_CNTL_HI 0x52
+#define DRAM_EXT_CNTL	0x53
+#define DRAM_REFRESH_RATE	0x03
+#define DRAM_REFRESH_DISABLE	0x00
+#define DRAM_REFRESH_60HZ	0x01
+#define DRAM_REFRESH_FAST_TEST	0x02
+#define DRAM_REFRESH_RESERVED	0x03
+#define DRAM_TIMING	0x54
+#define DRAM_ROW_BNDRY_0 0x55
+#define DRAM_ROW_BNDRY_1 0x56
+
+#define DPMS_SYNC_SELECT 0x61
+#define VSYNC_CNTL		0x08
+#define VSYNC_ON		0x00
+#define VSYNC_OFF		0x08
+#define HSYNC_CNTL		0x02
+#define HSYNC_ON		0x00
+#define HSYNC_OFF		0x02
+
+#define PIXPIPE_CONFIG_0 0x80
+#define DAC_8_BIT		0x80
+#define DAC_6_BIT		0x00
+#define HW_CURSOR_ENABLE	0x10
+#define EXTENDED_PALETTE	0x01
+
+#define PIXPIPE_CONFIG_1 0x81
+#define DISPLAY_COLOR_MODE	0x0F
+#define DISPLAY_VGA_MODE	0x00
+#define DISPLAY_8BPP_MODE	0x02
+#define DISPLAY_15BPP_MODE	0x04
+#define DISPLAY_16BPP_MODE	0x05
+#define DISPLAY_24BPP_MODE	0x06
+#define DISPLAY_32BPP_MODE	0x07
+
+#define PIXPIPE_CONFIG_2 0x82
+#define DISPLAY_GAMMA_ENABLE	0x08
+#define DISPLAY_GAMMA_DISABLE	0x00
+#define OVERLAY_GAMMA_ENABLE	0x04
+#define OVERLAY_GAMMA_DISABLE	0x00
+
+#define CURSOR_CONTROL	0xA0
+#define CURSOR_ORIGIN_SCREEN	0x00
+#define CURSOR_ORIGIN_DISPLAY	0x10
+#define CURSOR_MODE		0x07
+#define CURSOR_MODE_DISABLE	0x00
+#define CURSOR_MODE_32_4C_AX	0x01
+#define CURSOR_MODE_128_2C	0x02
+#define CURSOR_MODE_128_1C	0x03
+#define CURSOR_MODE_64_3C	0x04
+#define CURSOR_MODE_64_4C_AX	0x05
+#define CURSOR_MODE_64_4C	0x06
+#define CURSOR_MODE_RESERVED	0x07
+#define CURSOR_BASEADDR_LO 0xA2
+#define CURSOR_BASEADDR_HI 0xA3
+#define CURSOR_X_LO	0xA4
+#define CURSOR_X_HI	0xA5
+#define CURSOR_X_POS		0x00
+#define CURSOR_X_NEG		0x80
+#define CURSOR_Y_LO	0xA6
+#define CURSOR_Y_HI	0xA7
+#define CURSOR_Y_POS		0x00
+#define CURSOR_Y_NEG		0x80
+
+#define VCLK2_VCO_M	0xC8
+#define VCLK2_VCO_N	0xC9
+#define VCLK2_VCO_MN_MSBS 0xCA
+#define VCO_N_MSBS		0x30
+#define VCO_M_MSBS		0x03
+#define VCLK2_VCO_DIV_SEL 0xCB
+#define POST_DIV_SELECT		0x70
+#define POST_DIV_1		0x00
+#define POST_DIV_2		0x10
+#define POST_DIV_4		0x20
+#define POST_DIV_8		0x30
+#define POST_DIV_16		0x40
+#define POST_DIV_32		0x50
+#define VCO_LOOP_DIV_BY_4M	0x00
+#define VCO_LOOP_DIV_BY_16M	0x04
+#define REF_CLK_DIV_BY_5	0x02
+#define REF_DIV_4		0x00
+#define REF_DIV_1		0x01
+
+#define PLL_CNTL	0xCE
+#define PLL_MEMCLK_SEL		0x03
+#define PLL_MEMCLK__66667KHZ	0x00
+#define PLL_MEMCLK__75000KHZ	0x01
+#define PLL_MEMCLK__88889KHZ	0x02
+#define PLL_MEMCLK_100000KHZ	0x03
+
+/* Multimedia Extension Registers (MRX) */
+#define ACQ_CNTL_1	0x02
+#define ACQ_CNTL_2	0x03
+#define FRAME_CAP_MODE		0x01
+#define CONT_CAP_MODE		0x00
+#define SINGLE_CAP_MODE		0x01
+#define ACQ_CNTL_3	0x04
+#define COL_KEY_CNTL_1		0x3C
+#define BLANK_DISP_OVERLAY	0x20
+
+/* FIFOs */
+#define LP_FIFO		0x1000
+#define HP_FIFO		0x2000
+#define INSTPNT		0x3040
+#define LP_FIFO_COUNT	0x3040
+#define HP_FIFO_COUNT	0x3041
+
+/* FIFO Commands */
+#define CLIENT		0xE0000000
+#define CLIENT_2D	0x60000000
+
+/* Command Parser Mode Register */
+#define COMPARS		0x3038
+#define TWO_D_INST_DISABLE		0x08
+#define THREE_D_INST_DISABLE		0x04
+#define STATE_VAR_UPDATE_DISABLE	0x02
+#define PAL_STIP_DISABLE		0x01
+
+/* Interrupt Control Registers */
+#define IER		0x3030
+#define IIR		0x3032
+#define IMR		0x3034
+#define ISR		0x3036
+#define VMIINTB_EVENT		0x2000
+#define GPIO4_INT		0x1000
+#define DISP_FLIP_EVENT		0x0800
+#define DVD_PORT_DMA		0x0400
+#define DISP_VBLANK		0x0200
+#define FIFO_EMPTY_DMA_DONE	0x0100
+#define INST_PARSER_ERROR	0x0080
+#define USER_DEFINED		0x0040
+#define BREAKPOINT		0x0020
+#define DISP_HORIZ_COUNT	0x0010
+#define DISP_VSYNC		0x0008
+#define CAPTURE_HORIZ_COUNT	0x0004
+#define CAPTURE_VSYNC		0x0002
+#define THREE_D_PIPE_FLUSHED	0x0001
+
+/* FIFO Watermark and Burst Length Control Register */
+#define FWATER_BLC	0x00006000
+#define LMI_BURST_LENGTH	0x7F000000
+#define LMI_FIFO_WATERMARK	0x003F0000
+#define AGP_BURST_LENGTH	0x00007F00
+#define AGP_FIFO_WATERMARK	0x0000003F
+
+/* BitBLT Registers */
+#define SRC_DST_PITCH	0x00040000
+#define DST_PITCH		0x1FFF0000
+#define SRC_PITCH		0x00001FFF
+#define COLEXP_BG_COLOR	0x00040004
+#define COLEXP_FG_COLOR	0x00040008
+#define MONO_SRC_CNTL	0x0004000C
+#define MONO_USE_COLEXP		0x00000000
+#define MONO_USE_SRCEXP		0x08000000
+#define MONO_DATA_ALIGN		0x07000000
+#define MONO_BIT_ALIGN		0x01000000
+#define MONO_BYTE_ALIGN		0x02000000
+#define MONO_WORD_ALIGN		0x03000000
+#define MONO_DWORD_ALIGN	0x04000000
+#define MONO_QWORD_ALIGN	0x05000000
+#define MONO_SRC_INIT_DSCRD	0x003F0000
+#define MONO_SRC_RIGHT_CLIP	0x00003F00
+#define MONO_SRC_LEFT_CLIP	0x0000003F
+#define BITBLT_CONTROL	0x00040010
+#define BLTR_STATUS		0x80000000
+#define DYN_DEPTH		0x03000000
+#define DYN_DEPTH_8BPP		0x00000000
+#define DYN_DEPTH_16BPP		0x01000000
+#define DYN_DEPTH_24BPP		0x02000000
+#define DYN_DEPTH_32BPP		0x03000000	/* Unimplemented on the i740 */
+#define DYN_DEPTH_ENABLE	0x00800000
+#define PAT_VERT_ALIGN		0x00700000
+#define SOLID_PAT_SELECT	0x00080000
+#define PAT_IS_IN_COLOR		0x00000000
+#define PAT_IS_MONO		0x00040000
+#define MONO_PAT_TRANSP		0x00020000
+#define COLOR_TRANSP_ROP	0x00000000
+#define COLOR_TRANSP_DST	0x00008000
+#define COLOR_TRANSP_EQ		0x00000000
+#define COLOR_TRANSP_NOT_EQ	0x00010000
+#define COLOR_TRANSP_ENABLE	0x00004000
+#define MONO_SRC_TRANSP		0x00002000
+#define SRC_IS_IN_COLOR		0x00000000
+#define SRC_IS_MONO		0x00001000
+#define SRC_USE_SRC_ADDR	0x00000000
+#define SRC_USE_BLTDATA		0x00000400
+#define BLT_TOP_TO_BOT		0x00000000
+#define BLT_BOT_TO_TOP		0x00000200
+#define BLT_LEFT_TO_RIGHT	0x00000000
+#define BLT_RIGHT_TO_LEFT	0x00000100
+#define BLT_ROP			0x000000FF
+#define BLT_PAT_ADDR	0x00040014
+#define BLT_SRC_ADDR	0x00040018
+#define BLT_DST_ADDR	0x0004001C
+#define BLT_DST_H_W	0x00040020
+#define BLT_DST_HEIGHT		0x1FFF0000
+#define BLT_DST_WIDTH		0x00001FFF
+#define SRCEXP_BG_COLOR	0x00040024
+#define SRCEXP_FG_COLOR	0x00040028
+#define BLTDATA		0x00050000
diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
new file mode 100644
index 00000000000..8be03022134
--- /dev/null
+++ b/drivers/video/i740fb.c
@@ -0,0 +1,1337 @@
+/*
+ * i740fb - framebuffer driver for Intel740
+ * Copyright (c) 2011 Ondrej Zary
+ *
+ * Based on old i740fb driver (c) 2001-2002 Andrey Ulanov <drey@rt.mipt.ru>
+ * which was partially based on:
+ *  VGA 16-color framebuffer driver (c) 1999 Ben Pfaff <pfaffben@debian.org>
+ *	and Petr Vandrovec <VANDROVE@vc.cvut.cz>
+ *  i740 driver from XFree86 (c) 1998-1999 Precision Insight, Inc., Cedar Park,
+ *	Texas.
+ *  i740fb by Patrick LERDA, v0.9
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/console.h>
+#include <video/vga.h>
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include "i740_reg.h"
+
+static char *mode_option __devinitdata;
+
+#ifdef CONFIG_MTRR
+static int mtrr __devinitdata = 1;
+#endif
+
+struct i740fb_par {
+	unsigned char __iomem *regs;
+	bool has_sgram;
+#ifdef CONFIG_MTRR
+	int mtrr_reg;
+#endif
+	bool ddc_registered;
+	struct i2c_adapter ddc_adapter;
+	struct i2c_algo_bit_data ddc_algo;
+	u32 pseudo_palette[16];
+	struct mutex open_lock;
+	unsigned int ref_count;
+
+	u8 crtc[VGA_CRT_C];
+	u8 atc[VGA_ATT_C];
+	u8 gdc[VGA_GFX_C];
+	u8 seq[VGA_SEQ_C];
+	u8 misc;
+	u8 vss;
+
+	/* i740 specific registers */
+	u8 display_cntl;
+	u8 pixelpipe_cfg0;
+	u8 pixelpipe_cfg1;
+	u8 pixelpipe_cfg2;
+	u8 video_clk2_m;
+	u8 video_clk2_n;
+	u8 video_clk2_mn_msbs;
+	u8 video_clk2_div_sel;
+	u8 pll_cntl;
+	u8 address_mapping;
+	u8 io_cntl;
+	u8 bitblt_cntl;
+	u8 ext_vert_total;
+	u8 ext_vert_disp_end;
+	u8 ext_vert_sync_start;
+	u8 ext_vert_blank_start;
+	u8 ext_horiz_total;
+	u8 ext_horiz_blank;
+	u8 ext_offset;
+	u8 interlace_cntl;
+	u32 lmi_fifo_watermark;
+	u8 ext_start_addr;
+	u8 ext_start_addr_hi;
+};
+
+#define DACSPEED8	203
+#define DACSPEED16	163
+#define DACSPEED24_SG	136
+#define DACSPEED24_SD	128
+#define DACSPEED32	86
+
+static struct fb_fix_screeninfo i740fb_fix __devinitdata = {
+	.id =		"i740fb",
+	.type =		FB_TYPE_PACKED_PIXELS,
+	.visual =	FB_VISUAL_TRUECOLOR,
+	.xpanstep =	8,
+	.ypanstep =	1,
+	.accel =	FB_ACCEL_NONE,
+};
+
+static inline void i740outb(struct i740fb_par *par, u16 port, u8 val)
+{
+	vga_mm_w(par->regs, port, val);
+}
+static inline u8 i740inb(struct i740fb_par *par, u16 port)
+{
+	return vga_mm_r(par->regs, port);
+}
+static inline void i740outreg(struct i740fb_par *par, u16 port, u8 reg, u8 val)
+{
+	vga_mm_w_fast(par->regs, port, reg, val);
+}
+static inline u8 i740inreg(struct i740fb_par *par, u16 port, u8 reg)
+{
+	vga_mm_w(par->regs, port, reg);
+	return vga_mm_r(par->regs, port+1);
+}
+static inline void i740outreg_mask(struct i740fb_par *par, u16 port, u8 reg,
+				   u8 val, u8 mask)
+{
+	vga_mm_w_fast(par->regs, port, reg, (val & mask)
+		| (i740inreg(par, port, reg) & ~mask));
+}
+
+#define REG_DDC_DRIVE	0x62
+#define REG_DDC_STATE	0x63
+#define DDC_SCL		(1 << 3)
+#define DDC_SDA		(1 << 2)
+
+static void i740fb_ddc_setscl(void *data, int val)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SCL, DDC_SCL);
+	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SCL : 0, DDC_SCL);
+}
+
+static void i740fb_ddc_setsda(void *data, int val)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, DDC_SDA, DDC_SDA);
+	i740outreg_mask(par, XRX, REG_DDC_STATE, val ? DDC_SDA : 0, DDC_SDA);
+}
+
+static int i740fb_ddc_getscl(void *data)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SCL);
+
+	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SCL);
+}
+
+static int i740fb_ddc_getsda(void *data)
+{
+	struct i740fb_par *par = data;
+
+	i740outreg_mask(par, XRX, REG_DDC_DRIVE, 0, DDC_SDA);
+
+	return !!(i740inreg(par, XRX, REG_DDC_STATE) & DDC_SDA);
+}
+
+static int __devinit i740fb_setup_ddc_bus(struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+
+	strlcpy(par->ddc_adapter.name, info->fix.id,
+		sizeof(par->ddc_adapter.name));
+	par->ddc_adapter.owner		= THIS_MODULE;
+	par->ddc_adapter.class		= I2C_CLASS_DDC;
+	par->ddc_adapter.algo_data	= &par->ddc_algo;
+	par->ddc_adapter.dev.parent	= info->device;
+	par->ddc_algo.setsda		= i740fb_ddc_setsda;
+	par->ddc_algo.setscl		= i740fb_ddc_setscl;
+	par->ddc_algo.getsda		= i740fb_ddc_getsda;
+	par->ddc_algo.getscl		= i740fb_ddc_getscl;
+	par->ddc_algo.udelay		= 10;
+	par->ddc_algo.timeout		= 20;
+	par->ddc_algo.data		= par;
+
+	i2c_set_adapdata(&par->ddc_adapter, par);
+
+	return i2c_bit_add_bus(&par->ddc_adapter);
+}
+
+static int i740fb_open(struct fb_info *info, int user)
+{
+	struct i740fb_par *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	par->ref_count++;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static int i740fb_release(struct fb_info *info, int user)
+{
+	struct i740fb_par *par = info->par;
+
+	mutex_lock(&(par->open_lock));
+	if (par->ref_count == 0) {
+		printk(KERN_ERR "fb%d: release called with zero refcount\n",
+			info->node);
+		mutex_unlock(&(par->open_lock));
+		return -EINVAL;
+	}
+
+	par->ref_count--;
+	mutex_unlock(&(par->open_lock));
+
+	return 0;
+}
+
+static u32 i740_calc_fifo(struct i740fb_par *par, u32 freq, int bpp)
+{
+	/*
+	 * Would like to calculate these values automatically, but a generic
+	 * algorithm does not seem possible.  Note: These FIFO water mark
+	 * values were tested on several cards and seem to eliminate the
+	 * all of the snow and vertical banding, but fine adjustments will
+	 * probably be required for other cards.
+	 */
+
+	u32 wm;
+
+	switch (bpp) {
+	case 8:
+		if	(freq > 200)
+			wm = 0x18120000;
+		else if (freq > 175)
+			wm = 0x16110000;
+		else if (freq > 135)
+			wm = 0x120E0000;
+		else
+			wm = 0x100D0000;
+		break;
+	case 15:
+	case 16:
+		if (par->has_sgram) {
+			if	(freq > 140)
+				wm = 0x2C1D0000;
+			else if (freq > 120)
+				wm = 0x2C180000;
+			else if (freq > 100)
+				wm = 0x24160000;
+			else if (freq >  90)
+				wm = 0x18120000;
+			else if (freq >  50)
+				wm = 0x16110000;
+			else if (freq >  32)
+				wm = 0x13100000;
+			else
+				wm = 0x120E0000;
+		} else {
+			if	(freq > 160)
+				wm = 0x28200000;
+			else if (freq > 140)
+				wm = 0x2A1E0000;
+			else if (freq > 130)
+				wm = 0x2B1A0000;
+			else if (freq > 120)
+				wm = 0x2C180000;
+			else if (freq > 100)
+				wm = 0x24180000;
+			else if (freq >  90)
+				wm = 0x18120000;
+			else if (freq >  50)
+				wm = 0x16110000;
+			else if (freq >  32)
+				wm = 0x13100000;
+			else
+				wm = 0x120E0000;
+		}
+		break;
+	case 24:
+		if (par->has_sgram) {
+			if	(freq > 130)
+				wm = 0x31200000;
+			else if (freq > 120)
+				wm = 0x2E200000;
+			else if (freq > 100)
+				wm = 0x2C1D0000;
+			else if (freq >  80)
+				wm = 0x25180000;
+			else if (freq >  64)
+				wm = 0x24160000;
+			else if (freq >  49)
+				wm = 0x18120000;
+			else if (freq >  32)
+				wm = 0x16110000;
+			else
+				wm = 0x13100000;
+		} else {
+			if	(freq > 120)
+				wm = 0x311F0000;
+			else if (freq > 100)
+				wm = 0x2C1D0000;
+			else if (freq >  80)
+				wm = 0x25180000;
+			else if (freq >  64)
+				wm = 0x24160000;
+			else if (freq >  49)
+				wm = 0x18120000;
+			else if (freq >  32)
+				wm = 0x16110000;
+			else
+				wm = 0x13100000;
+		}
+		break;
+	case 32:
+		if (par->has_sgram) {
+			if	(freq >  80)
+				wm = 0x2A200000;
+			else if (freq >  60)
+				wm = 0x281A0000;
+			else if (freq >  49)
+				wm = 0x25180000;
+			else if (freq >  32)
+				wm = 0x18120000;
+			else
+				wm = 0x16110000;
+		} else {
+			if	(freq >  80)
+				wm = 0x29200000;
+			else if (freq >  60)
+				wm = 0x281A0000;
+			else if (freq >  49)
+				wm = 0x25180000;
+			else if (freq >  32)
+				wm = 0x18120000;
+			else
+				wm = 0x16110000;
+		}
+		break;
+	}
+
+	return wm;
+}
+
+/* clock calculation from i740fb by Patrick LERDA */
+
+#define I740_RFREQ		1000000
+#define TARGET_MAX_N		30
+#define I740_FFIX		(1 << 8)
+#define I740_RFREQ_FIX		(I740_RFREQ / I740_FFIX)
+#define I740_REF_FREQ		(6667 * I740_FFIX / 100)	/* 66.67 MHz */
+#define I740_MAX_VCO_FREQ	(450 * I740_FFIX)		/* 450 MHz */
+
+static void i740_calc_vclk(u32 freq, struct i740fb_par *par)
+{
+	const u32 err_max    = freq / (200  * I740_RFREQ / I740_FFIX);
+	const u32 err_target = freq / (1000 * I740_RFREQ / I740_FFIX);
+	u32 err_best = 512 * I740_FFIX;
+	u32 f_err, f_vco;
+	int m_best = 0, n_best = 0, p_best = 0, d_best = 0;
+	int m, n;
+
+	p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));
+	d_best = 0;
+	f_vco = (freq * (1 << p_best)) / I740_RFREQ_FIX;
+	freq = freq / I740_RFREQ_FIX;
+
+	n = 2;
+	do {
+		n++;
+		m = ((f_vco * n) / I740_REF_FREQ + 2) / 4;
+
+		if (m < 3)
+			m = 3;
+
+		{
+			u32 f_out = (((m * I740_REF_FREQ * (4 << 2 * d_best))
+				 / n) + ((1 << p_best) / 2)) / (1 << p_best);
+
+			f_err = (freq - f_out);
+
+			if (abs(f_err) < err_max) {
+				m_best = m;
+				n_best = n;
+				err_best = f_err;
+			}
+		}
+	} while ((abs(f_err) >= err_target) &&
+		 ((n <= TARGET_MAX_N) || (abs(err_best) > err_max)));
+
+	if (abs(f_err) < err_target) {
+		m_best = m;
+		n_best = n;
+	}
+
+	par->video_clk2_m = (m_best - 2) & 0xFF;
+	par->video_clk2_n = (n_best - 2) & 0xFF;
+	par->video_clk2_mn_msbs = ((((n_best - 2) >> 4) & VCO_N_MSBS)
+				 | (((m_best - 2) >> 8) & VCO_M_MSBS));
+	par->video_clk2_div_sel =
+		((p_best << 4) | (d_best ? 4 : 0) | REF_DIV_1);
+}
+
+static int i740fb_decode_var(const struct fb_var_screeninfo *var,
+			     struct i740fb_par *par, struct fb_info *info)
+{
+	/*
+	 * Get the video params out of 'var'.
+	 * If a value doesn't fit, round it up, if it's too big, return -EINVAL.
+	 */
+
+	u32 xres, right, hslen, left, xtotal;
+	u32 yres, lower, vslen, upper, ytotal;
+	u32 vxres, xoffset, vyres, yoffset;
+	u32 bpp, base, dacspeed24, mem;
+	u8 r7;
+	int i;
+
+	dev_dbg(info->device, "decode_var: xres: %i, yres: %i, xres_v: %i, xres_v: %i\n",
+		  var->xres, var->yres, var->xres_virtual, var->xres_virtual);
+	dev_dbg(info->device, "	xoff: %i, yoff: %i, bpp: %i, graysc: %i\n",
+		  var->xoffset, var->yoffset, var->bits_per_pixel,
+		  var->grayscale);
+	dev_dbg(info->device, "	activate: %i, nonstd: %i, vmode: %i\n",
+		  var->activate, var->nonstd, var->vmode);
+	dev_dbg(info->device, "	pixclock: %i, hsynclen:%i, vsynclen:%i\n",
+		  var->pixclock, var->hsync_len, var->vsync_len);
+	dev_dbg(info->device, "	left: %i, right: %i, up:%i, lower:%i\n",
+		  var->left_margin, var->right_margin, var->upper_margin,
+		  var->lower_margin);
+
+
+	bpp = var->bits_per_pixel;
+	switch (bpp) {
+	case 1 ... 8:
+		bpp = 8;
+		if ((1000000 / var->pixclock) > DACSPEED8) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 8bpp)\n",
+				1000000 / var->pixclock, DACSPEED8);
+			return -EINVAL;
+		}
+		break;
+	case 9 ... 15:
+		bpp = 15;
+	case 16:
+		if ((1000000 / var->pixclock) > DACSPEED16) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 15/16bpp)\n",
+				1000000 / var->pixclock, DACSPEED16);
+			return -EINVAL;
+		}
+		break;
+	case 17 ... 24:
+		bpp = 24;
+		dacspeed24 = par->has_sgram ? DACSPEED24_SG : DACSPEED24_SD;
+		if ((1000000 / var->pixclock) > dacspeed24) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 24bpp)\n",
+				1000000 / var->pixclock, dacspeed24);
+			return -EINVAL;
+		}
+		break;
+	case 25 ... 32:
+		bpp = 32;
+		if ((1000000 / var->pixclock) > DACSPEED32) {
+			dev_err(info->device, "requested pixclock %i MHz out of range (max. %i MHz at 32bpp)\n",
+				1000000 / var->pixclock, DACSPEED32);
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xres = ALIGN(var->xres, 8);
+	vxres = ALIGN(var->xres_virtual, 16);
+	if (vxres < xres)
+		vxres = xres;
+
+	xoffset = ALIGN(var->xoffset, 8);
+	if (xres + xoffset > vxres)
+		xoffset = vxres - xres;
+
+	left = ALIGN(var->left_margin, 8);
+	right = ALIGN(var->right_margin, 8);
+	hslen = ALIGN(var->hsync_len, 8);
+
+	yres = var->yres;
+	vyres = var->yres_virtual;
+	if (yres > vyres)
+		vyres = yres;
+
+	yoffset = var->yoffset;
+	if (yres + yoffset > vyres)
+		yoffset = vyres - yres;
+
+	lower = var->lower_margin;
+	vslen = var->vsync_len;
+	upper = var->upper_margin;
+
+	mem = vxres * vyres * ((bpp + 1) / 8);
+	if (mem > info->screen_size) {
+		dev_err(info->device, "not enough video memory (%d KB requested, %ld KB avaliable)\n",
+			mem >> 10, info->screen_size >> 10);
+		return -ENOMEM;
+	}
+
+	if (yoffset + yres > vyres)
+		yoffset = vyres - yres;
+
+	xtotal = xres + right + hslen + left;
+	ytotal = yres + lower + vslen + upper;
+
+	par->crtc[VGA_CRTC_H_TOTAL] = (xtotal >> 3) - 5;
+	par->crtc[VGA_CRTC_H_DISP] = (xres >> 3) - 1;
+	par->crtc[VGA_CRTC_H_BLANK_START] = ((xres + right) >> 3) - 1;
+	par->crtc[VGA_CRTC_H_SYNC_START] = (xres + right) >> 3;
+	par->crtc[VGA_CRTC_H_SYNC_END] = (((xres + right + hslen) >> 3) & 0x1F)
+		| ((((xres + right + hslen) >> 3) & 0x20) << 2);
+	par->crtc[VGA_CRTC_H_BLANK_END] = ((xres + right + hslen) >> 3 & 0x1F)
+		| 0x80;
+
+	par->crtc[VGA_CRTC_V_TOTAL] = ytotal - 2;
+
+	r7 = 0x10;	/* disable linecompare */
+	if (ytotal & 0x100)
+		r7 |= 0x01;
+	if (ytotal & 0x200)
+		r7 |= 0x20;
+
+	par->crtc[VGA_CRTC_PRESET_ROW] = 0;
+	par->crtc[VGA_CRTC_MAX_SCAN] = 0x40;	/* 1 scanline, no linecmp */
+	if (var->vmode & FB_VMODE_DOUBLE)
+		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x80;
+	par->crtc[VGA_CRTC_CURSOR_START] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_END] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_HI] = 0x00;
+	par->crtc[VGA_CRTC_CURSOR_LO] = 0x00;
+	par->crtc[VGA_CRTC_V_DISP_END] = yres-1;
+	if ((yres-1) & 0x100)
+		r7 |= 0x02;
+	if ((yres-1) & 0x200)
+		r7 |= 0x40;
+
+	par->crtc[VGA_CRTC_V_BLANK_START] = yres + lower - 1;
+	par->crtc[VGA_CRTC_V_SYNC_START] = yres + lower - 1;
+	if ((yres + lower - 1) & 0x100)
+		r7 |= 0x0C;
+	if ((yres + lower - 1) & 0x200) {
+		par->crtc[VGA_CRTC_MAX_SCAN] |= 0x20;
+		r7 |= 0x80;
+	}
+
+	/* disabled IRQ */
+	par->crtc[VGA_CRTC_V_SYNC_END] =
+		((yres + lower - 1 + vslen) & 0x0F) & ~0x10;
+	/* 0x7F for VGA, but some SVGA chips require all 8 bits to be set */
+	par->crtc[VGA_CRTC_V_BLANK_END] = (yres + lower - 1 + vslen) & 0xFF;
+
+	par->crtc[VGA_CRTC_UNDERLINE] = 0x00;
+	par->crtc[VGA_CRTC_MODE] = 0xC3 ;
+	par->crtc[VGA_CRTC_LINE_COMPARE] = 0xFF;
+	par->crtc[VGA_CRTC_OVERFLOW] = r7;
+
+	par->vss = 0x00;	/* 3DA */
+
+	for (i = 0x00; i < 0x10; i++)
+		par->atc[i] = i;
+	par->atc[VGA_ATC_MODE] = 0x81;
+	par->atc[VGA_ATC_OVERSCAN] = 0x00;	/* 0 for EGA, 0xFF for VGA */
+	par->atc[VGA_ATC_PLANE_ENABLE] = 0x0F;
+	par->atc[VGA_ATC_COLOR_PAGE] = 0x00;
+
+	par->misc = 0xC3;
+	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+		par->misc &= ~0x40;
+	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+		par->misc &= ~0x80;
+
+	par->seq[VGA_SEQ_CLOCK_MODE] = 0x01;
+	par->seq[VGA_SEQ_PLANE_WRITE] = 0x0F;
+	par->seq[VGA_SEQ_CHARACTER_MAP] = 0x00;
+	par->seq[VGA_SEQ_MEMORY_MODE] = 0x06;
+
+	par->gdc[VGA_GFX_SR_VALUE] = 0x00;
+	par->gdc[VGA_GFX_SR_ENABLE] = 0x00;
+	par->gdc[VGA_GFX_COMPARE_VALUE] = 0x00;
+	par->gdc[VGA_GFX_DATA_ROTATE] = 0x00;
+	par->gdc[VGA_GFX_PLANE_READ] = 0;
+	par->gdc[VGA_GFX_MODE] = 0x02;
+	par->gdc[VGA_GFX_MISC] = 0x05;
+	par->gdc[VGA_GFX_COMPARE_MASK] = 0x0F;
+	par->gdc[VGA_GFX_BIT_MASK] = 0xFF;
+
+	base = (yoffset * vxres + (xoffset & ~7)) >> 2;
+	switch (bpp) {
+	case 8:
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 3;
+		par->ext_offset = vxres >> 11;
+		par->pixelpipe_cfg1 = DISPLAY_8BPP_MODE;
+		par->bitblt_cntl = COLEXP_8BPP;
+		break;
+	case 15: /* 0rrrrrgg gggbbbbb */
+	case 16: /* rrrrrggg gggbbbbb */
+		par->pixelpipe_cfg1 = (var->green.length == 6) ?
+			DISPLAY_16BPP_MODE : DISPLAY_15BPP_MODE;
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 2;
+		par->ext_offset = vxres >> 10;
+		par->bitblt_cntl = COLEXP_16BPP;
+		base *= 2;
+		break;
+	case 24:
+		par->crtc[VGA_CRTC_OFFSET] = (vxres * 3) >> 3;
+		par->ext_offset = (vxres * 3) >> 11;
+		par->pixelpipe_cfg1 = DISPLAY_24BPP_MODE;
+		par->bitblt_cntl = COLEXP_24BPP;
+		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+		base *= 3;
+		break;
+	case 32:
+		par->crtc[VGA_CRTC_OFFSET] = vxres >> 1;
+		par->ext_offset = vxres >> 9;
+		par->pixelpipe_cfg1 = DISPLAY_32BPP_MODE;
+		par->bitblt_cntl = COLEXP_RESERVED; /* Unimplemented on i740 */
+		base *= 4;
+		break;
+	}
+
+	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
+	par->ext_start_addr =
+		((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+
+	par->pixelpipe_cfg0 = DAC_8_BIT;
+
+	par->pixelpipe_cfg2 = DISPLAY_GAMMA_ENABLE | OVERLAY_GAMMA_ENABLE;
+	par->io_cntl = EXTENDED_CRTC_CNTL;
+	par->address_mapping = LINEAR_MODE_ENABLE | PAGE_MAPPING_ENABLE;
+	par->display_cntl = HIRES_MODE;
+
+	/* Set the MCLK freq */
+	par->pll_cntl = PLL_MEMCLK_100000KHZ; /* 100 MHz -- use as default */
+
+	/* Calculate the extended CRTC regs */
+	par->ext_vert_total = (ytotal - 2) >> 8;
+	par->ext_vert_disp_end = (yres - 1) >> 8;
+	par->ext_vert_sync_start = (yres + lower) >> 8;
+	par->ext_vert_blank_start = (yres + lower) >> 8;
+	par->ext_horiz_total = ((xtotal >> 3) - 5) >> 8;
+	par->ext_horiz_blank = (((xres + right) >> 3) & 0x40) >> 6;
+
+	par->interlace_cntl = INTERLACE_DISABLE;
+
+	/* Set the overscan color to 0. (NOTE: This only affects >8bpp mode) */
+	par->atc[VGA_ATC_OVERSCAN] = 0;
+
+	/* Calculate VCLK that most closely matches the requested dot clock */
+	i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par);
+
+	/* Since we program the clocks ourselves, always use VCLK2. */
+	par->misc |= 0x0C;
+
+	/* Calculate the FIFO Watermark and Burst Length. */
+	par->lmi_fifo_watermark =
+		i740_calc_fifo(par, 1000000 / var->pixclock, bpp);
+
+	return 0;
+}
+
+static int i740fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset	= var->green.offset = var->blue.offset = 0;
+		var->red.length	= var->green.length = var->blue.length = 8;
+		break;
+	case 16:
+		switch (var->green.length) {
+		default:
+		case 5:
+			var->red.offset = 10;
+			var->green.offset = 5;
+			var->blue.offset = 0;
+			var->red.length	= 5;
+			var->green.length = 5;
+			var->blue.length = 5;
+			break;
+		case 6:
+			var->red.offset = 11;
+			var->green.offset = 5;
+			var->blue.offset = 0;
+			var->red.length = var->blue.length = 5;
+			break;
+		}
+		break;
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length	= var->green.length = var->blue.length = 8;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->transp.length = 8;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
+	if (info->monspecs.hfmax && info->monspecs.vfmax &&
+	    info->monspecs.dclkmax && fb_validate_mode(var, info) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void vga_protect(struct i740fb_par *par)
+{
+	/* disable the display */
+	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, VGA_ATT_W, 0x00);	/* enable pallete access */
+}
+
+static void vga_unprotect(struct i740fb_par *par)
+{
+	/* reenable display */
+	i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, VGA_ATT_W, 0x20);	/* disable pallete access */
+}
+
+static int i740fb_set_par(struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+	u32 itemp;
+	int i;
+
+	i = i740fb_decode_var(&info->var, par, info);
+	if (i)
+		return i;
+
+	memset(info->screen_base, 0, info->screen_size);
+
+	vga_protect(par);
+
+	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_DISABLE);
+
+	mdelay(1);
+
+	i740outreg(par, XRX, VCLK2_VCO_M, par->video_clk2_m);
+	i740outreg(par, XRX, VCLK2_VCO_N, par->video_clk2_n);
+	i740outreg(par, XRX, VCLK2_VCO_MN_MSBS, par->video_clk2_mn_msbs);
+	i740outreg(par, XRX, VCLK2_VCO_DIV_SEL, par->video_clk2_div_sel);
+
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0,
+			par->pixelpipe_cfg0 & DAC_8_BIT, 0x80);
+
+	i740inb(par, 0x3DA);
+	i740outb(par, 0x3C0, 0x00);
+
+	/* update misc output register */
+	i740outb(par, VGA_MIS_W, par->misc | 0x01);
+
+	/* synchronous reset on */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x01);
+	/* write sequencer registers */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE,
+			par->seq[VGA_SEQ_CLOCK_MODE] | 0x20);
+	for (i = 2; i < VGA_SEQ_C; i++)
+		i740outreg(par, VGA_SEQ_I, i, par->seq[i]);
+
+	/* synchronous reset off */
+	i740outreg(par, VGA_SEQ_I, VGA_SEQ_RESET, 0x03);
+
+	/* deprotect CRT registers 0-7 */
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_V_SYNC_END,
+			par->crtc[VGA_CRTC_V_SYNC_END]);
+
+	/* write CRT registers */
+	for (i = 0; i < VGA_CRT_C; i++)
+		i740outreg(par, VGA_CRT_IC, i, par->crtc[i]);
+
+	/* write graphics controller registers */
+	for (i = 0; i < VGA_GFX_C; i++)
+		i740outreg(par, VGA_GFX_I, i, par->gdc[i]);
+
+	/* write attribute controller registers */
+	for (i = 0; i < VGA_ATT_C; i++) {
+		i740inb(par, VGA_IS1_RC);		/* reset flip-flop */
+		i740outb(par, VGA_ATT_IW, i);
+		i740outb(par, VGA_ATT_IW, par->atc[i]);
+	}
+
+	i740inb(par, VGA_IS1_RC);
+	i740outb(par, VGA_ATT_IW, 0x20);
+
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_TOTAL, par->ext_vert_total);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_DISPLAY, par->ext_vert_disp_end);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_SYNC_START,
+			par->ext_vert_sync_start);
+	i740outreg(par, VGA_CRT_IC, EXT_VERT_BLANK_START,
+			par->ext_vert_blank_start);
+	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_TOTAL, par->ext_horiz_total);
+	i740outreg(par, VGA_CRT_IC, EXT_HORIZ_BLANK, par->ext_horiz_blank);
+	i740outreg(par, VGA_CRT_IC, EXT_OFFSET, par->ext_offset);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI, par->ext_start_addr_hi);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR, par->ext_start_addr);
+
+	i740outreg_mask(par, VGA_CRT_IC, INTERLACE_CNTL,
+			par->interlace_cntl, INTERLACE_ENABLE);
+	i740outreg_mask(par, XRX, ADDRESS_MAPPING, par->address_mapping, 0x1F);
+	i740outreg_mask(par, XRX, BITBLT_CNTL, par->bitblt_cntl, COLEXP_MODE);
+	i740outreg_mask(par, XRX, DISPLAY_CNTL,
+			par->display_cntl, VGA_WRAP_MODE | GUI_MODE);
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_0, par->pixelpipe_cfg0, 0x9B);
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_2, par->pixelpipe_cfg2, 0x0C);
+
+	i740outreg(par, XRX, PLL_CNTL, par->pll_cntl);
+
+	i740outreg_mask(par, XRX, PIXPIPE_CONFIG_1,
+			par->pixelpipe_cfg1, DISPLAY_COLOR_MODE);
+
+	itemp = readl(par->regs + FWATER_BLC);
+	itemp &= ~(LMI_BURST_LENGTH | LMI_FIFO_WATERMARK);
+	itemp |= par->lmi_fifo_watermark;
+	writel(itemp, par->regs + FWATER_BLC);
+
+	i740outreg(par, XRX, DRAM_EXT_CNTL, DRAM_REFRESH_60HZ);
+
+	i740outreg_mask(par, MRX, COL_KEY_CNTL_1, 0, BLANK_DISP_OVERLAY);
+	i740outreg_mask(par, XRX, IO_CTNL,
+			par->io_cntl, EXTENDED_ATTR_CNTL | EXTENDED_CRTC_CNTL);
+
+	if (par->pixelpipe_cfg1 != DISPLAY_8BPP_MODE) {
+		i740outb(par, VGA_PEL_MSK, 0xFF);
+		i740outb(par, VGA_PEL_IW, 0x00);
+		for (i = 0; i < 256; i++) {
+			itemp = (par->pixelpipe_cfg0 & DAC_8_BIT) ? i : i >> 2;
+			i740outb(par, VGA_PEL_D, itemp);
+			i740outb(par, VGA_PEL_D, itemp);
+			i740outb(par, VGA_PEL_D, itemp);
+		}
+	}
+
+	/* Wait for screen to stabilize. */
+	mdelay(50);
+	vga_unprotect(par);
+
+	info->fix.line_length =
+			info->var.xres_virtual * info->var.bits_per_pixel / 8;
+	if (info->var.bits_per_pixel == 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	return 0;
+}
+
+static int i740fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info)
+{
+	u32 r, g, b;
+
+	dev_dbg(info->device, "setcolreg: regno: %i, red=%d, green=%d, blue=%d, transp=%d, bpp=%d\n",
+		regno, red, green, blue, transp, info->var.bits_per_pixel);
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno >= 256)
+			return -EINVAL;
+		i740outb(info->par, VGA_PEL_IW, regno);
+		i740outb(info->par, VGA_PEL_D, red >> 8);
+		i740outb(info->par, VGA_PEL_D, green >> 8);
+		i740outb(info->par, VGA_PEL_D, blue >> 8);
+		break;
+	case FB_VISUAL_TRUECOLOR:
+		if (regno >= 16)
+			return -EINVAL;
+		r = (red >> (16 - info->var.red.length))
+			<< info->var.red.offset;
+		b = (blue >> (16 - info->var.blue.length))
+			<< info->var.blue.offset;
+		g = (green >> (16 - info->var.green.length))
+			<< info->var.green.offset;
+		((u32 *) info->pseudo_palette)[regno] = r | g | b;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int i740fb_pan_display(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+	u32 base = (var->yoffset * info->var.xres_virtual
+		 + (var->xoffset & ~7)) >> 2;
+
+	dev_dbg(info->device, "pan_display: xoffset: %i yoffset: %i base: %i\n",
+		var->xoffset, var->yoffset, base);
+
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		break;
+	case 15:
+	case 16:
+		base *= 2;
+		break;
+	case 24:
+		/*
+		 * The last bit does not seem to have any effect on the start
+		 * address register in 24bpp mode, so...
+		 */
+		base &= 0xFFFFFFFE; /* ...ignore the last bit. */
+		base *= 3;
+		break;
+	case 32:
+		base *= 4;
+		break;
+	}
+
+	par->crtc[VGA_CRTC_START_LO] = base & 0x000000FF;
+	par->crtc[VGA_CRTC_START_HI] = (base & 0x0000FF00) >>  8;
+	par->ext_start_addr_hi = (base & 0x3FC00000) >> 22;
+	par->ext_start_addr =
+			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE;
+
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_LO,  base & 0x000000FF);
+	i740outreg(par, VGA_CRT_IC, VGA_CRTC_START_HI,
+			(base & 0x0000FF00) >> 8);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR_HI,
+			(base & 0x3FC00000) >> 22);
+	i740outreg(par, VGA_CRT_IC, EXT_START_ADDR,
+			((base & 0x003F0000) >> 16) | EXT_START_ADDR_ENABLE);
+
+	return 0;
+}
+
+static int i740fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct i740fb_par *par = info->par;
+
+	unsigned char SEQ01;
+	int DPMSSyncSelect;
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+	case FB_BLANK_NORMAL:
+		SEQ01 = 0x00;
+		DPMSSyncSelect = HSYNC_ON | VSYNC_ON;
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_ON | VSYNC_OFF;
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_OFF | VSYNC_ON;
+		break;
+	case FB_BLANK_POWERDOWN:
+		SEQ01 = 0x20;
+		DPMSSyncSelect = HSYNC_OFF | VSYNC_OFF;
+		break;
+	default:
+		return -EINVAL;
+	}
+	/* Turn the screen on/off */
+	i740outb(par, SRX, 0x01);
+	SEQ01 |= i740inb(par, SRX + 1) & ~0x20;
+	i740outb(par, SRX, 0x01);
+	i740outb(par, SRX + 1, SEQ01);
+
+	/* Set the DPMS mode */
+	i740outreg(par, XRX, DPMS_SYNC_SELECT, DPMSSyncSelect);
+
+	/* Let fbcon do a soft blank for us */
+	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
+}
+
+static struct fb_ops i740fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open	= i740fb_open,
+	.fb_release	= i740fb_release,
+	.fb_check_var	= i740fb_check_var,
+	.fb_set_par	= i740fb_set_par,
+	.fb_setcolreg	= i740fb_setcolreg,
+	.fb_blank	= i740fb_blank,
+	.fb_pan_display	= i740fb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+/* ------------------------------------------------------------------------- */
+
+static int __devinit i740fb_probe(struct pci_dev *dev,
+				  const struct pci_device_id *ent)
+{
+	struct fb_info *info;
+	struct i740fb_par *par;
+	int ret, tmp;
+	bool found = false;
+	u8 *edid;
+
+	info = framebuffer_alloc(sizeof(struct i740fb_par), &(dev->dev));
+	if (!info) {
+		dev_err(&(dev->dev), "cannot allocate framebuffer\n");
+		return -ENOMEM;
+	}
+
+	par = info->par;
+	mutex_init(&par->open_lock);
+
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->var.bits_per_pixel = 8;
+	info->fbops = &i740fb_ops;
+	info->pseudo_palette = par->pseudo_palette;
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(info->device, "cannot enable PCI device\n");
+		goto err_enable_device;
+	}
+
+	ret = pci_request_regions(dev, info->fix.id);
+	if (ret) {
+		dev_err(info->device, "error requesting regions\n");
+		goto err_request_regions;
+	}
+
+	info->screen_base = pci_ioremap_bar(dev, 0);
+	if (!info->screen_base) {
+		dev_err(info->device, "error remapping base\n");
+		ret = -ENOMEM;
+		goto err_ioremap_1;
+	}
+
+	par->regs = pci_ioremap_bar(dev, 1);
+	if (!par->regs) {
+		dev_err(info->device, "error remapping MMIO\n");
+		ret = -ENOMEM;
+		goto err_ioremap_2;
+	}
+
+	/* detect memory size */
+	if ((i740inreg(par, XRX, DRAM_ROW_TYPE) & DRAM_ROW_1)
+							== DRAM_ROW_1_SDRAM)
+		i740outb(par, XRX, DRAM_ROW_BNDRY_1);
+	else
+		i740outb(par, XRX, DRAM_ROW_BNDRY_0);
+	info->screen_size = i740inb(par, XRX + 1) * 1024 * 1024;
+	/* detect memory type */
+	tmp = i740inreg(par, XRX, DRAM_ROW_CNTL_LO);
+	par->has_sgram = !((tmp & DRAM_RAS_TIMING) ||
+			   (tmp & DRAM_RAS_PRECHARGE));
+
+	printk(KERN_INFO "fb%d: Intel740 on %s, %ld KB %s\n", info->node,
+		pci_name(dev), info->screen_size >> 10,
+		par->has_sgram ? "SGRAM" : "SDRAM");
+
+	info->fix = i740fb_fix;
+	info->fix.mmio_start = pci_resource_start(dev, 1);
+	info->fix.mmio_len = pci_resource_len(dev, 1);
+	info->fix.smem_start = pci_resource_start(dev, 0);
+	info->fix.smem_len = info->screen_size;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+
+	if (i740fb_setup_ddc_bus(info) == 0) {
+		par->ddc_registered = true;
+		edid = fb_ddc_read(&par->ddc_adapter);
+		if (edid) {
+			fb_edid_to_monspecs(edid, &info->monspecs);
+			kfree(edid);
+			if (!info->monspecs.modedb)
+				dev_err(info->device,
+					"error getting mode database\n");
+			else {
+				const struct fb_videomode *m;
+
+				fb_videomode_to_modelist(
+					info->monspecs.modedb,
+					info->monspecs.modedb_len,
+					&info->modelist);
+				m = fb_find_best_display(&info->monspecs,
+							 &info->modelist);
+				if (m) {
+					fb_videomode_to_var(&info->var, m);
+					/* fill all other info->var's fields */
+					if (!i740fb_check_var(&info->var, info))
+						found = true;
+				}
+			}
+		}
+	}
+
+	if (!mode_option && !found)
+		mode_option = "640x480-8@60";
+
+	if (mode_option) {
+		ret = fb_find_mode(&info->var, info, mode_option,
+				   info->monspecs.modedb,
+				   info->monspecs.modedb_len,
+				   NULL, info->var.bits_per_pixel);
+		if (!ret || ret == 4) {
+			dev_err(info->device, "mode %s not found\n",
+				mode_option);
+			ret = -EINVAL;
+		}
+	}
+
+	fb_destroy_modedb(info->monspecs.modedb);
+	info->monspecs.modedb = NULL;
+
+	/* maximize virtual vertical size for fast scrolling */
+	info->var.yres_virtual = info->fix.smem_len * 8 /
+			(info->var.bits_per_pixel * info->var.xres_virtual);
+
+	if (ret == -EINVAL)
+		goto err_find_mode;
+
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret) {
+		dev_err(info->device, "cannot allocate colormap\n");
+		goto err_alloc_cmap;
+	}
+
+	ret = register_framebuffer(info);
+	if (ret) {
+		dev_err(info->device, "error registering framebuffer\n");
+		goto err_reg_framebuffer;
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n",
+		info->node, info->fix.id);
+	pci_set_drvdata(dev, info);
+#ifdef CONFIG_MTRR
+	if (mtrr) {
+		par->mtrr_reg = -1;
+		par->mtrr_reg = mtrr_add(info->fix.smem_start,
+				info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
+	}
+#endif
+	return 0;
+
+err_reg_framebuffer:
+	fb_dealloc_cmap(&info->cmap);
+err_alloc_cmap:
+err_find_mode:
+	if (par->ddc_registered)
+		i2c_del_adapter(&par->ddc_adapter);
+	pci_iounmap(dev, par->regs);
+err_ioremap_2:
+	pci_iounmap(dev, info->screen_base);
+err_ioremap_1:
+	pci_release_regions(dev);
+err_request_regions:
+/*	pci_disable_device(dev); */
+err_enable_device:
+	framebuffer_release(info);
+	return ret;
+}
+
+static void __devexit i740fb_remove(struct pci_dev *dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+
+	if (info) {
+#ifdef CONFIG_MTRR
+		struct i740fb_par *par = info->par;
+
+		if (par->mtrr_reg >= 0) {
+			mtrr_del(par->mtrr_reg, 0, 0);
+			par->mtrr_reg = -1;
+		}
+#endif
+		unregister_framebuffer(info);
+		fb_dealloc_cmap(&info->cmap);
+		if (par->ddc_registered)
+			i2c_del_adapter(&par->ddc_adapter);
+		pci_iounmap(dev, par->regs);
+		pci_iounmap(dev, info->screen_base);
+		pci_release_regions(dev);
+/*		pci_disable_device(dev); */
+		pci_set_drvdata(dev, NULL);
+		framebuffer_release(info);
+	}
+}
+
+#ifdef CONFIG_PM
+static int i740fb_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct i740fb_par *par = info->par;
+
+	/* don't disable console during hibernation and wakeup from it */
+	if (state.event == PM_EVENT_FREEZE || state.event == PM_EVENT_PRETHAW)
+		return 0;
+
+	console_lock();
+	mutex_lock(&(par->open_lock));
+
+	/* do nothing if framebuffer is not active */
+	if (par->ref_count == 0) {
+		mutex_unlock(&(par->open_lock));
+		console_unlock();
+		return 0;
+	}
+
+	fb_set_suspend(info, 1);
+
+	pci_save_state(dev);
+	pci_disable_device(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	mutex_unlock(&(par->open_lock));
+	console_unlock();
+
+	return 0;
+}
+
+static int i740fb_resume(struct pci_dev *dev)
+{
+	struct fb_info *info = pci_get_drvdata(dev);
+	struct i740fb_par *par = info->par;
+
+	console_lock();
+	mutex_lock(&(par->open_lock));
+
+	if (par->ref_count == 0)
+		goto fail;
+
+	pci_set_power_state(dev, PCI_D0);
+	pci_restore_state(dev);
+	if (pci_enable_device(dev))
+		goto fail;
+
+	i740fb_set_par(info);
+	fb_set_suspend(info, 0);
+
+fail:
+	mutex_unlock(&(par->open_lock));
+	console_unlock();
+	return 0;
+}
+#else
+#define i740fb_suspend NULL
+#define i740fb_resume NULL
+#endif /* CONFIG_PM */
+
+#define I740_ID_PCI 0x00d1
+#define I740_ID_AGP 0x7800
+
+static DEFINE_PCI_DEVICE_TABLE(i740fb_id_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_PCI) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, I740_ID_AGP) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, i740fb_id_table);
+
+static struct pci_driver i740fb_driver = {
+	.name		= "i740fb",
+	.id_table	= i740fb_id_table,
+	.probe		= i740fb_probe,
+	.remove		= __devexit_p(i740fb_remove),
+	.suspend	= i740fb_suspend,
+	.resume		= i740fb_resume,
+};
+
+#ifndef MODULE
+static int  __init i740fb_setup(char *options)
+{
+	char *opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+#ifdef CONFIG_MTRR
+		else if (!strncmp(opt, "mtrr:", 5))
+			mtrr = simple_strtoul(opt + 5, NULL, 0);
+#endif
+		else
+			mode_option = opt;
+	}
+
+	return 0;
+}
+#endif
+
+int __init i740fb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("i740fb", &option))
+		return -ENODEV;
+	i740fb_setup(option);
+#endif
+
+	return pci_register_driver(&i740fb_driver);
+}
+
+static void __exit i740fb_exit(void)
+{
+	pci_unregister_driver(&i740fb_driver);
+}
+
+module_init(i740fb_init);
+module_exit(i740fb_exit);
+
+MODULE_AUTHOR("(c) 2011 Ondrej Zary <linux@rainbow-software.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("fbdev driver for Intel740");
+
+module_param(mode_option, charp, 0444);
+MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
+
+#ifdef CONFIG_MTRR
+module_param(mtrr, int, 0444);
+MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
+#endif
-- 
cgit v1.2.3-70-g09d2


From c572c8bbff13591f6c9f249d4413f79ddda21e61 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri, 17 Feb 2012 09:45:01 +0300
Subject: viafb: NULL dereference on allocation failure in query_edid()

We should handle the allocation here, if only to keep the static
checkers happy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/via_aux_edid.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/via/via_aux_edid.c
index 03f7a41c8a3..754d4509033 100644
--- a/drivers/video/via/via_aux_edid.c
+++ b/drivers/video/via/via_aux_edid.c
@@ -36,10 +36,13 @@ static void query_edid(struct via_aux_drv *drv)
 	unsigned char edid[EDID_LENGTH];
 	bool valid = false;
 
-	if (spec)
+	if (spec) {
 		fb_destroy_modedb(spec->modedb);
-	else
+	} else {
 		spec = kmalloc(sizeof(*spec), GFP_KERNEL);
+		if (!spec)
+			return;
+	}
 
 	spec->version = spec->revision = 0;
 	if (via_aux_read(drv, 0x00, edid, EDID_LENGTH)) {
-- 
cgit v1.2.3-70-g09d2


From 94f61a7666224ab307e387ff0d146055ae77e6ab Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 19 Feb 2012 19:11:51 +0000
Subject: i740fb: fix compile error when CONFIG_MTRR is not selected

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/i740fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/i740fb.c b/drivers/video/i740fb.c
index 8be03022134..fe574d84ed9 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/i740fb.c
@@ -1179,9 +1179,9 @@ static void __devexit i740fb_remove(struct pci_dev *dev)
 	struct fb_info *info = pci_get_drvdata(dev);
 
 	if (info) {
-#ifdef CONFIG_MTRR
 		struct i740fb_par *par = info->par;
 
+#ifdef CONFIG_MTRR
 		if (par->mtrr_reg >= 0) {
 			mtrr_del(par->mtrr_reg, 0, 0);
 			par->mtrr_reg = -1;
-- 
cgit v1.2.3-70-g09d2


From cd3b34493f9b5de1d617e0be39f6cb5c59c9889c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 25 Jan 2012 13:31:04 +0200
Subject: OMAPDSS: cleanup probe functions

Now that dss is using devm_ functions for allocation in probe functions,
small reordering of the allocations allows us to clean up the probe
functions more.

This patch moves "unmanaged" allocations after the managed ones, and
uses plain returns instead of gotos where possible. This lets us remove
a bunch of goto labels, simplifying the probe's error handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 33 +++++++++++++++------------------
 drivers/video/omap2/dss/dsi.c   | 37 +++++++++++++++++--------------------
 drivers/video/omap2/dss/dss.c   | 10 ++++------
 drivers/video/omap2/dss/rfbi.c  | 31 +++++++++++++------------------
 drivers/video/omap2/dss/venc.c  | 21 ++++++++++++---------
 5 files changed, 61 insertions(+), 71 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index f235798a7ba..d8e044df3d4 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3341,15 +3341,6 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 
 	dispc.pdev = pdev;
 
-	clk = clk_get(&pdev->dev, "fck");
-	if (IS_ERR(clk)) {
-		DSSERR("can't get fck\n");
-		r = PTR_ERR(clk);
-		goto err_get_clk;
-	}
-
-	dispc.dss_clk = clk;
-
 	spin_lock_init(&dispc.irq_lock);
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
@@ -3362,30 +3353,38 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 	dispc_mem = platform_get_resource(dispc.pdev, IORESOURCE_MEM, 0);
 	if (!dispc_mem) {
 		DSSERR("can't get IORESOURCE_MEM DISPC\n");
-		r = -EINVAL;
-		goto err_ioremap;
+		return -EINVAL;
 	}
+
 	dispc.base = devm_ioremap(&pdev->dev, dispc_mem->start,
 				  resource_size(dispc_mem));
 	if (!dispc.base) {
 		DSSERR("can't ioremap DISPC\n");
-		r = -ENOMEM;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
+
 	dispc.irq = platform_get_irq(dispc.pdev, 0);
 	if (dispc.irq < 0) {
 		DSSERR("platform_get_irq failed\n");
-		r = -ENODEV;
-		goto err_ioremap;
+		return -ENODEV;
 	}
 
 	r = devm_request_irq(&pdev->dev, dispc.irq, omap_dispc_irq_handler,
 			     IRQF_SHARED, "OMAP DISPC", dispc.pdev);
 	if (r < 0) {
 		DSSERR("request_irq failed\n");
-		goto err_ioremap;
+		return r;
+	}
+
+	clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		DSSERR("can't get fck\n");
+		r = PTR_ERR(clk);
+		return r;
 	}
 
+	dispc.dss_clk = clk;
+
 	pm_runtime_enable(&pdev->dev);
 
 	r = dispc_runtime_get();
@@ -3406,9 +3405,7 @@ static int omap_dispchw_probe(struct platform_device *pdev)
 
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
-err_ioremap:
 	clk_put(dispc.dss_clk);
-err_get_clk:
 	return r;
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 0330216bd4e..662d14f8c2c 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4688,10 +4688,8 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	struct dsi_data *dsi;
 
 	dsi = devm_kzalloc(&dsidev->dev, sizeof(*dsi), GFP_KERNEL);
-	if (!dsi) {
-		r = -ENOMEM;
-		goto err_alloc;
-	}
+	if (!dsi)
+		return -ENOMEM;
 
 	dsi->pdev = dsidev;
 	dsi_pdev_map[dsi_module] = dsidev;
@@ -4714,12 +4712,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	mutex_init(&dsi->lock);
 	sema_init(&dsi->bus_lock, 1);
 
-	r = dsi_get_clocks(dsidev);
-	if (r)
-		goto err_alloc;
-
-	pm_runtime_enable(&dsidev->dev);
-
 	INIT_DELAYED_WORK_DEFERRABLE(&dsi->framedone_timeout_work,
 			dsi_framedone_timeout_work_callback);
 
@@ -4731,28 +4723,27 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 	dsi_mem = platform_get_resource(dsi->pdev, IORESOURCE_MEM, 0);
 	if (!dsi_mem) {
 		DSSERR("can't get IORESOURCE_MEM DSI\n");
-		r = -EINVAL;
-		goto err_ioremap;
+		return -EINVAL;
 	}
+
 	dsi->base = devm_ioremap(&dsidev->dev, dsi_mem->start,
 				 resource_size(dsi_mem));
 	if (!dsi->base) {
 		DSSERR("can't ioremap DSI\n");
-		r = -ENOMEM;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
+
 	dsi->irq = platform_get_irq(dsi->pdev, 0);
 	if (dsi->irq < 0) {
 		DSSERR("platform_get_irq failed\n");
-		r = -ENODEV;
-		goto err_ioremap;
+		return -ENODEV;
 	}
 
 	r = devm_request_irq(&dsidev->dev, dsi->irq, omap_dsi_irq_handler,
 			     IRQF_SHARED, dev_name(&dsidev->dev), dsi->pdev);
 	if (r < 0) {
 		DSSERR("request_irq failed\n");
-		goto err_ioremap;
+		return r;
 	}
 
 	/* DSI VCs initialization */
@@ -4764,9 +4755,15 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi_calc_clock_param_ranges(dsidev);
 
+	r = dsi_get_clocks(dsidev);
+	if (r)
+		return r;
+
+	pm_runtime_enable(&dsidev->dev);
+
 	r = dsi_runtime_get(dsidev);
 	if (r)
-		goto err_ioremap;
+		goto err_runtime_get;
 
 	rev = dsi_read_reg(dsidev, DSI_REVISION);
 	dev_dbg(&dsidev->dev, "OMAP DSI rev %d.%d\n",
@@ -4784,9 +4781,9 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
 
 	return 0;
 
-err_ioremap:
+err_runtime_get:
 	pm_runtime_disable(&dsidev->dev);
-err_alloc:
+	dsi_put_clocks(dsidev);
 	return r;
 }
 
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index aa2e0896864..4a6b5eeef6a 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -748,20 +748,19 @@ static int omap_dsshw_probe(struct platform_device *pdev)
 	dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
 	if (!dss_mem) {
 		DSSERR("can't get IORESOURCE_MEM DSS\n");
-		r = -EINVAL;
-		goto err_ioremap;
+		return -EINVAL;
 	}
+
 	dss.base = devm_ioremap(&pdev->dev, dss_mem->start,
 				resource_size(dss_mem));
 	if (!dss.base) {
 		DSSERR("can't ioremap DSS\n");
-		r = -ENOMEM;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
 
 	r = dss_get_clocks();
 	if (r)
-		goto err_ioremap;
+		return r;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -809,7 +808,6 @@ err_dpi:
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	dss_put_clocks();
-err_ioremap:
 	return r;
 }
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 7370482b726..788a0ef6323 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -922,36 +922,34 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
 	rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0);
 	if (!rfbi_mem) {
 		DSSERR("can't get IORESOURCE_MEM RFBI\n");
-		r = -EINVAL;
-		goto err_ioremap;
+		return -EINVAL;
 	}
+
 	rfbi.base = devm_ioremap(&pdev->dev, rfbi_mem->start,
 				 resource_size(rfbi_mem));
 	if (!rfbi.base) {
 		DSSERR("can't ioremap RFBI\n");
-		r = -ENOMEM;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
-	r = rfbi_runtime_get();
-	if (r)
-		goto err_get_rfbi;
-
-	msleep(10);
-
 	clk = clk_get(&pdev->dev, "ick");
 	if (IS_ERR(clk)) {
 		DSSERR("can't get ick\n");
-		r = PTR_ERR(clk);
-		goto err_get_ick;
+		return PTR_ERR(clk);
 	}
 
 	rfbi.l4_khz = clk_get_rate(clk) / 1000;
 
 	clk_put(clk);
 
+	pm_runtime_enable(&pdev->dev);
+
+	r = rfbi_runtime_get();
+	if (r)
+		goto err_runtime_get;
+
+	msleep(10);
+
 	rev = rfbi_read_reg(RFBI_REVISION);
 	dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n",
 	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -960,11 +958,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_get_ick:
-	rfbi_runtime_put();
-err_get_rfbi:
+err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
-err_ioremap:
 	return r;
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 967d4432c67..9c3daf71750 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -795,38 +795,41 @@ static int omap_venchw_probe(struct platform_device *pdev)
 	venc_mem = platform_get_resource(venc.pdev, IORESOURCE_MEM, 0);
 	if (!venc_mem) {
 		DSSERR("can't get IORESOURCE_MEM VENC\n");
-		r = -EINVAL;
-		goto err_ioremap;
+		return -EINVAL;
 	}
+
 	venc.base = devm_ioremap(&pdev->dev, venc_mem->start,
 				 resource_size(venc_mem));
 	if (!venc.base) {
 		DSSERR("can't ioremap VENC\n");
-		r = -ENOMEM;
-		goto err_ioremap;
+		return -ENOMEM;
 	}
 
 	r = venc_get_clocks(pdev);
 	if (r)
-		goto err_ioremap;
+		return r;
 
 	pm_runtime_enable(&pdev->dev);
 
 	r = venc_runtime_get();
 	if (r)
-		goto err_get_venc;
+		goto err_runtime_get;
 
 	rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
 	dev_dbg(&pdev->dev, "OMAP VENC rev %d\n", rev_id);
 
 	venc_runtime_put();
 
-	return omap_dss_register_driver(&venc_driver);
+	r = omap_dss_register_driver(&venc_driver);
+	if (r)
+		goto err_reg_panel_driver;
+
+	return 0;
 
-err_get_venc:
+err_reg_panel_driver:
+err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
-err_ioremap:
 	return r;
 }
 
-- 
cgit v1.2.3-70-g09d2


From c124f23dfdf7da890405dfa0efbeb015cab27b56 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 30 Jan 2012 10:52:39 +0530
Subject: OMAPDSS: Features: Maintain dss_feats as a list

The number of dss_feat_id members has increased to a large value, the current
way of assigning a subset of these features (for a particular OMAP) as a mask
is no longer feasible.

Maintain the subset of features supported as lists. Make the function
dss_has_feature() traverse through this list.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss_features.c | 140 ++++++++++++++++++++++++---------
 drivers/video/omap2/dss/dss_features.h |  54 ++++++-------
 2 files changed, 128 insertions(+), 66 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 419419ad049..656cb69f464 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -41,7 +41,8 @@ struct omap_dss_features {
 	const struct dss_reg_field *reg_fields;
 	const int num_reg_fields;
 
-	const u32 has_feature;
+	const enum dss_feat_id *features;
+	const int num_features;
 
 	const int num_mgrs;
 	const int num_ovls;
@@ -337,15 +338,92 @@ static const struct dss_param_range omap4_dss_param_range[] = {
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 2048 },
 };
 
+static const enum dss_feat_id omap2_dss_feat_list[] = {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+};
+
+static const enum dss_feat_id omap3430_dss_feat_list[] = {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+	FEAT_DSI_PLL_FREQSEL,
+	FEAT_DSI_REVERSE_TXCLKESC,
+	FEAT_VENC_REQUIRES_TV_DAC_CLK,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_FIFO_MERGE,
+	FEAT_OMAP3_DSI_FIFO_BUG,
+};
+
+static const enum dss_feat_id omap3630_dss_feat_list[] = {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+	FEAT_DSI_PLL_PWR_BUG,
+	FEAT_DSI_PLL_FREQSEL,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_FIFO_MERGE,
+	FEAT_OMAP3_DSI_FIFO_BUG,
+};
+
+static const enum dss_feat_id omap4430_es1_0_dss_feat_list[] = {
+	FEAT_MGR_LCD2,
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_GNQ,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
+};
+
+static const enum dss_feat_id omap4_dss_feat_list[] = {
+	FEAT_MGR_LCD2,
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_GNQ,
+	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
+};
+
 /* OMAP2 DSS Features */
 static const struct omap_dss_features omap2_dss_features = {
 	.reg_fields = omap2_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap2_dss_reg_fields),
 
-	.has_feature	=
-		FEAT_LCDENABLEPOL | FEAT_LCDENABLESIGNAL |
-		FEAT_PCKFREEENABLE | FEAT_FUNCGATED |
-		FEAT_ROWREPEATENABLE | FEAT_RESIZECONF,
+	.features = omap2_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap2_dss_feat_list),
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -363,15 +441,8 @@ static const struct omap_dss_features omap3430_dss_features = {
 	.reg_fields = omap3_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
 
-	.has_feature	=
-		FEAT_LCDENABLEPOL |
-		FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
-		FEAT_FUNCGATED | FEAT_ROWREPEATENABLE |
-		FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
-		FEAT_DSI_PLL_FREQSEL | FEAT_DSI_REVERSE_TXCLKESC |
-		FEAT_VENC_REQUIRES_TV_DAC_CLK | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE |
-		FEAT_OMAP3_DSI_FIFO_BUG,
+	.features = omap3430_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap3430_dss_feat_list),
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -388,15 +459,8 @@ static const struct omap_dss_features omap3630_dss_features = {
 	.reg_fields = omap3_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
 
-	.has_feature    =
-		FEAT_LCDENABLEPOL |
-		FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
-		FEAT_FUNCGATED |
-		FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
-		FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
-		FEAT_DSI_PLL_FREQSEL | FEAT_CPR | FEAT_PRELOAD |
-		FEAT_FIR_COEF_V | FEAT_ALPHA_FIXED_ZORDER | FEAT_FIFO_MERGE |
-		FEAT_OMAP3_DSI_FIFO_BUG,
+	.features = omap3630_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap3630_dss_feat_list),
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -415,13 +479,8 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 	.reg_fields = omap4_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
 
-	.has_feature	=
-		FEAT_MGR_LCD2 |
-		FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
-		FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
-		FEAT_DSI_GNQ | FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 |
-		FEAT_CPR | FEAT_PRELOAD | FEAT_FIR_COEF_V |
-		FEAT_ALPHA_FREE_ZORDER | FEAT_FIFO_MERGE,
+	.features = omap4430_es1_0_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap4430_es1_0_dss_feat_list),
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
@@ -439,14 +498,8 @@ static const struct omap_dss_features omap4_dss_features = {
 	.reg_fields = omap4_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
 
-	.has_feature	=
-		FEAT_MGR_LCD2 |
-		FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
-		FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH |
-		FEAT_DSI_GNQ | FEAT_HDMI_CTS_SWMODE |
-		FEAT_HANDLE_UV_SEPARATE | FEAT_ATTR2 | FEAT_CPR |
-		FEAT_PRELOAD | FEAT_FIR_COEF_V | FEAT_ALPHA_FREE_ZORDER |
-		FEAT_FIFO_MERGE,
+	.features = omap4_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap4_dss_feat_list),
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
@@ -550,7 +603,16 @@ u32 dss_feat_get_burst_size_unit(void)
 /* DSS has_feature check */
 bool dss_has_feature(enum dss_feat_id id)
 {
-	return omap_current_dss_features->has_feature & id;
+	int i;
+	const enum dss_feat_id *features = omap_current_dss_features->features;
+	const int num_features = omap_current_dss_features->num_features;
+
+	for (i = 0; i < num_features; i++) {
+		if (features[i] == id)
+			return true;
+	}
+
+	return false;
 }
 
 void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end)
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 5f9b8215677..682f091cf02 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -31,36 +31,36 @@
 
 /* DSS has feature id */
 enum dss_feat_id {
-	FEAT_LCDENABLEPOL		= 1 << 3,
-	FEAT_LCDENABLESIGNAL		= 1 << 4,
-	FEAT_PCKFREEENABLE		= 1 << 5,
-	FEAT_FUNCGATED			= 1 << 6,
-	FEAT_MGR_LCD2			= 1 << 7,
-	FEAT_LINEBUFFERSPLIT		= 1 << 8,
-	FEAT_ROWREPEATENABLE		= 1 << 9,
-	FEAT_RESIZECONF			= 1 << 10,
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_MGR_LCD2,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
 	/* Independent core clk divider */
-	FEAT_CORE_CLK_DIV		= 1 << 11,
-	FEAT_LCD_CLK_SRC		= 1 << 12,
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
 	/* DSI-PLL power command 0x3 is not working */
-	FEAT_DSI_PLL_PWR_BUG		= 1 << 13,
-	FEAT_DSI_PLL_FREQSEL		= 1 << 14,
-	FEAT_DSI_DCS_CMD_CONFIG_VC	= 1 << 15,
-	FEAT_DSI_VC_OCP_WIDTH		= 1 << 16,
-	FEAT_DSI_REVERSE_TXCLKESC	= 1 << 17,
-	FEAT_DSI_GNQ			= 1 << 18,
-	FEAT_HDMI_CTS_SWMODE		= 1 << 19,
-	FEAT_HANDLE_UV_SEPARATE         = 1 << 20,
-	FEAT_ATTR2                      = 1 << 21,
-	FEAT_VENC_REQUIRES_TV_DAC_CLK	= 1 << 22,
-	FEAT_CPR			= 1 << 23,
-	FEAT_PRELOAD			= 1 << 24,
-	FEAT_FIR_COEF_V			= 1 << 25,
-	FEAT_ALPHA_FIXED_ZORDER		= 1 << 26,
-	FEAT_ALPHA_FREE_ZORDER		= 1 << 27,
-	FEAT_FIFO_MERGE			= 1 << 28,
+	FEAT_DSI_PLL_PWR_BUG,
+	FEAT_DSI_PLL_FREQSEL,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_REVERSE_TXCLKESC,
+	FEAT_DSI_GNQ,
+	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_VENC_REQUIRES_TV_DAC_CLK,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
 	/* An unknown HW bug causing the normal FIFO thresholds not to work */
-	FEAT_OMAP3_DSI_FIFO_BUG		= 1 << 29,
+	FEAT_OMAP3_DSI_FIFO_BUG,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.3-70-g09d2


From 79ee89cdbd9a58baa079d019574d11aa864b7842 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 30 Jan 2012 10:54:17 +0530
Subject: OMAPDSS: DISPC: Fix scaling constraints for OMAP4

The calculation of required DISPC_FCLK for downscaling is done by multplying the
pixel clock with an integer factor. This isn't true for OMAP4 where the required
clock is calculated using the exact ratio of downscaling done.

Fix this calculation for OMAP4. Also, do a minor clean up of calc_fclk().

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d8e044df3d4..22023bba63e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1694,6 +1694,7 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
 	unsigned int hf, vf;
+	unsigned long pclk = dispc_mgr_pclk_rate(channel);
 
 	/*
 	 * FIXME how to determine the 'A' factor
@@ -1716,13 +1717,16 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
 
 	if (cpu_is_omap24xx()) {
 		if (vf > 1 && hf > 1)
-			return dispc_mgr_pclk_rate(channel) * 4;
+			return pclk * 4;
 		else
-			return dispc_mgr_pclk_rate(channel) * 2;
+			return pclk * 2;
 	} else if (cpu_is_omap34xx()) {
-		return dispc_mgr_pclk_rate(channel) * vf * hf;
+		return pclk * vf * hf;
 	} else {
-		return dispc_mgr_pclk_rate(channel) * hf;
+		if (hf > 1)
+			return DIV_ROUND_UP(pclk, out_width) * width;
+		else
+			return pclk;
 	}
 }
 
-- 
cgit v1.2.3-70-g09d2


From 992ee64af66f05e16aa70b475f9ad3047f801185 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegorslists@googlemail.com>
Date: Wed, 8 Feb 2012 11:11:08 +0100
Subject: OMAPDSS: add Innolux AT080TN52 display support

This patch adds support for Innolux AT080TN52 800x600 panel.
Tested with AM3517 based board.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 28b9a6d61b0..30fe4dfeb22 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -363,6 +363,29 @@ static struct panel_config generic_dpi_panels[] = {
 
 		.name			= "ortustech_com43h4m10xtc",
 	},
+
+	/* Innolux AT080TN52 */
+	{
+		{
+			.x_res = 800,
+			.y_res = 600,
+
+			.pixel_clock	= 41142,
+
+			.hsw		= 20,
+			.hfp		= 210,
+			.hbp		= 46,
+
+			.vsw		= 10,
+			.vfp		= 12,
+			.vbp		= 23,
+		},
+		.acb			= 0x0,
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO,
+
+		.name			= "innolux_at080tn52",
+	},
 };
 
 struct panel_drv_data {
-- 
cgit v1.2.3-70-g09d2


From da8f14fc3bb054081c90abc9dd38679bb9308dbb Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Wed, 8 Feb 2012 11:54:19 +0530
Subject: OMAPDSS: HDMI: Move Avi-infoframe struct to hdmi_ip_data

With AVI infoframe various parameters of video stream such as
aspect ratio, quantization range, videocode etc will be indicated
from source to sink.Thus AVI information needs to be set/accessed
by the middle ware based on the video content.
Thus this parameter is now moved to the ip_data structure.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi.h         | 42 +++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |  8 +++---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 40 -----------------------------
 3 files changed, 46 insertions(+), 44 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index cb6f0f20f45..1f58b84d690 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -113,6 +113,47 @@ struct ti_hdmi_ip_ops {
 
 };
 
+/*
+ * Refer to section 8.2 in HDMI 1.3 specification for
+ * details about infoframe databytes
+ */
+struct hdmi_core_infoframe_avi {
+	/* Y0, Y1 rgb,yCbCr */
+	u8	db1_format;
+	/* A0  Active information Present */
+	u8	db1_active_info;
+	/* B0, B1 Bar info data valid */
+	u8	db1_bar_info_dv;
+	/* S0, S1 scan information */
+	u8	db1_scan_info;
+	/* C0, C1 colorimetry */
+	u8	db2_colorimetry;
+	/* M0, M1 Aspect ratio (4:3, 16:9) */
+	u8	db2_aspect_ratio;
+	/* R0...R3 Active format aspect ratio */
+	u8	db2_active_fmt_ar;
+	/* ITC IT content. */
+	u8	db3_itc;
+	/* EC0, EC1, EC2 Extended colorimetry */
+	u8	db3_ec;
+	/* Q1, Q0 Quantization range */
+	u8	db3_q_range;
+	/* SC1, SC0 Non-uniform picture scaling */
+	u8	db3_nup_scaling;
+	/* VIC0..6 Video format identification */
+	u8	db4_videocode;
+	/* PR0..PR3 Pixel repetition factor */
+	u8	db5_pixel_repeat;
+	/* Line number end of top bar */
+	u16	db6_7_line_eoftop;
+	/* Line number start of bottom bar */
+	u16	db8_9_line_sofbottom;
+	/* Pixel number end of left bar */
+	u16	db10_11_pixel_eofleft;
+	/* Pixel number start of right bar */
+	u16	db12_13_pixel_sofright;
+};
+
 struct hdmi_ip_data {
 	void __iomem	*base_wp;	/* HDMI wrapper */
 	unsigned long	core_sys_offset;
@@ -122,6 +163,7 @@ struct hdmi_ip_data {
 	const struct ti_hdmi_ip_ops *ops;
 	struct hdmi_config cfg;
 	struct hdmi_pll_info pll_data;
+	struct hdmi_core_infoframe_avi avi_cfg;
 
 	/* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
 	int hpd_gpio;
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index c05eacd4444..b9b97f172cd 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -594,12 +594,12 @@ static void hdmi_core_video_config(struct hdmi_ip_data *ip_data,
 			HDMI_CORE_SYS_TMDS_CTRL, cfg->tclk_sel_clkmult, 6, 5);
 }
 
-static void hdmi_core_aux_infoframe_avi_config(struct hdmi_ip_data *ip_data,
-		struct hdmi_core_infoframe_avi info_avi)
+static void hdmi_core_aux_infoframe_avi_config(struct hdmi_ip_data *ip_data)
 {
 	u32 val;
 	char sum = 0, checksum = 0;
 	void __iomem *av_base = hdmi_av_base(ip_data);
+	struct hdmi_core_infoframe_avi info_avi = ip_data->avi_cfg;
 
 	sum += 0x82 + 0x002 + 0x00D;
 	hdmi_write_reg(av_base, HDMI_CORE_AV_AVI_TYPE, 0x082);
@@ -778,7 +778,7 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
 	struct omap_video_timings video_timing;
 	struct hdmi_video_format video_format;
 	/* HDMI core */
-	struct hdmi_core_infoframe_avi avi_cfg;
+	struct hdmi_core_infoframe_avi avi_cfg = ip_data->avi_cfg;
 	struct hdmi_core_video_config v_core_cfg;
 	struct hdmi_core_packet_enable_repeat repeat_cfg;
 	struct hdmi_config *cfg = &ip_data->cfg;
@@ -840,7 +840,7 @@ void ti_hdmi_4xxx_basic_configure(struct hdmi_ip_data *ip_data)
 	avi_cfg.db10_11_pixel_eofleft = 0;
 	avi_cfg.db12_13_pixel_sofright = 0;
 
-	hdmi_core_aux_infoframe_avi_config(ip_data, avi_cfg);
+	hdmi_core_aux_infoframe_avi_config(ip_data);
 
 	/* enable/repeat the infoframe */
 	repeat_cfg.avi_infoframe = HDMI_PACKETENABLE;
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
index 004b4182bdd..a14d1a0e6e4 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h
@@ -446,46 +446,6 @@ struct hdmi_core_video_config {
 	enum hdmi_core_tclkselclkmult	tclk_sel_clkmult;
 };
 
-/*
- * Refer to section 8.2 in HDMI 1.3 specification for
- * details about infoframe databytes
- */
-struct hdmi_core_infoframe_avi {
-	/* Y0, Y1 rgb,yCbCr */
-	u8	db1_format;
-	/* A0  Active information Present */
-	u8	db1_active_info;
-	/* B0, B1 Bar info data valid */
-	u8	db1_bar_info_dv;
-	/* S0, S1 scan information */
-	u8	db1_scan_info;
-	/* C0, C1 colorimetry */
-	u8	db2_colorimetry;
-	/* M0, M1 Aspect ratio (4:3, 16:9) */
-	u8	db2_aspect_ratio;
-	/* R0...R3 Active format aspect ratio */
-	u8	db2_active_fmt_ar;
-	/* ITC IT content. */
-	u8	db3_itc;
-	/* EC0, EC1, EC2 Extended colorimetry */
-	u8	db3_ec;
-	/* Q1, Q0 Quantization range */
-	u8	db3_q_range;
-	/* SC1, SC0 Non-uniform picture scaling */
-	u8	db3_nup_scaling;
-	/* VIC0..6 Video format identification */
-	u8	db4_videocode;
-	/* PR0..PR3 Pixel repetition factor */
-	u8	db5_pixel_repeat;
-	/* Line number end of top bar */
-	u16	db6_7_line_eoftop;
-	/* Line number start of bottom bar */
-	u16	db8_9_line_sofbottom;
-	/* Pixel number end of left bar */
-	u16	db10_11_pixel_eofleft;
-	/* Pixel number start of right bar */
-	u16	db12_13_pixel_sofright;
-};
 /*
  * Refer to section 8.2 in HDMI 1.3 specification for
  * details about infoframe databytes
-- 
cgit v1.2.3-70-g09d2


From 8df4f5ce64e9dc986570799f94c8850f57f8ced9 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Tue, 7 Feb 2012 02:13:49 +0200
Subject: OMAPDSS: TPO-TD03MTEA1: fix suspend hang

During system suspend, at the time DSS is being suspended, SPI is
already suspended and it's clocks are cut. Because of this trying to
communicate with the LCD controller results in a deadlock.

To fix this, split out LCD programming parts of display enable/disable
functions and perform them from SPI PM callbacks instead when system is
being suspended. If the display is just being enabled/disabled, do it
from DSS callbacks as before.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 .../video/omap2/displays/panel-tpo-td043mtea1.c    | 151 +++++++++++++++------
 1 file changed, 108 insertions(+), 43 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index e6649aa8959..741e9d7cec1 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -53,10 +53,14 @@ static const u16 tpo_td043_def_gamma[12] = {
 struct tpo_td043_device {
 	struct spi_device *spi;
 	struct regulator *vcc_reg;
+	int nreset_gpio;
 	u16 gamma[12];
 	u32 mode;
 	u32 hmirror:1;
 	u32 vmirror:1;
+	u32 powered_on:1;
+	u32 spi_suspended:1;
+	u32 power_on_resume:1;
 };
 
 static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
@@ -265,28 +269,16 @@ static const struct omap_video_timings tpo_td043_timings = {
 	.vbp		= 34,
 };
 
-static int tpo_td043_power_on(struct omap_dss_device *dssdev)
+static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 {
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
-	int nreset_gpio = dssdev->reset_gpio;
-	int r;
+	int nreset_gpio = tpo_td043->nreset_gpio;
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+	if (tpo_td043->powered_on)
 		return 0;
 
-	r = omapdss_dpi_display_enable(dssdev);
-	if (r)
-		goto err0;
-
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err1;
-	}
-
 	regulator_enable(tpo_td043->vcc_reg);
 
-	/* wait for power up */
+	/* wait for regulator to stabilize */
 	msleep(160);
 
 	if (gpio_is_valid(nreset_gpio))
@@ -301,19 +293,15 @@ static int tpo_td043_power_on(struct omap_dss_device *dssdev)
 			tpo_td043->vmirror);
 	tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
 
+	tpo_td043->powered_on = 1;
 	return 0;
-err1:
-	omapdss_dpi_display_disable(dssdev);
-err0:
-	return r;
 }
 
-static void tpo_td043_power_off(struct omap_dss_device *dssdev)
+static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043)
 {
-	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
-	int nreset_gpio = dssdev->reset_gpio;
+	int nreset_gpio = tpo_td043->nreset_gpio;
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+	if (!tpo_td043->powered_on)
 		return;
 
 	tpo_td043_write(tpo_td043->spi, 3,
@@ -329,54 +317,94 @@ static void tpo_td043_power_off(struct omap_dss_device *dssdev)
 
 	regulator_disable(tpo_td043->vcc_reg);
 
+	tpo_td043->powered_on = 0;
+}
+
+static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
+	r = omapdss_dpi_display_enable(dssdev);
+	if (r)
+		goto err0;
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto err1;
+	}
+
+	/*
+	 * If we are resuming from system suspend, SPI clocks might not be
+	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
+	 */
+	if (!tpo_td043->spi_suspended) {
+		r = tpo_td043_power_on(tpo_td043);
+		if (r)
+			goto err1;
+	}
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+err1:
+	omapdss_dpi_display_disable(dssdev);
+err0:
+	return r;
+}
+
+static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&dssdev->dev);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return;
+
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
 
 	omapdss_dpi_display_disable(dssdev);
+
+	if (!tpo_td043->spi_suspended)
+		tpo_td043_power_off(tpo_td043);
 }
 
 static int tpo_td043_enable(struct omap_dss_device *dssdev)
 {
-	int ret;
-
 	dev_dbg(&dssdev->dev, "enable\n");
 
-	ret = tpo_td043_power_on(dssdev);
-	if (ret)
-		return ret;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-	return 0;
+	return tpo_td043_enable_dss(dssdev);
 }
 
 static void tpo_td043_disable(struct omap_dss_device *dssdev)
 {
 	dev_dbg(&dssdev->dev, "disable\n");
 
-	tpo_td043_power_off(dssdev);
+	tpo_td043_disable_dss(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 }
 
 static int tpo_td043_suspend(struct omap_dss_device *dssdev)
 {
-	tpo_td043_power_off(dssdev);
+	dev_dbg(&dssdev->dev, "suspend\n");
+
+	tpo_td043_disable_dss(dssdev);
+
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+
 	return 0;
 }
 
 static int tpo_td043_resume(struct omap_dss_device *dssdev)
 {
-	int r = 0;
-
-	r = tpo_td043_power_on(dssdev);
-	if (r)
-		return r;
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	dev_dbg(&dssdev->dev, "resume\n");
 
-	return 0;
+	return tpo_td043_enable_dss(dssdev);
 }
 
 static int tpo_td043_probe(struct omap_dss_device *dssdev)
@@ -491,6 +519,7 @@ static int tpo_td043_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	tpo_td043->spi = spi;
+	tpo_td043->nreset_gpio = dssdev->reset_gpio;
 	dev_set_drvdata(&spi->dev, tpo_td043);
 	dev_set_drvdata(&dssdev->dev, tpo_td043);
 
@@ -509,10 +538,46 @@ static int __devexit tpo_td043_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int tpo_td043_spi_suspend(struct device *dev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", tpo_td043);
+
+	tpo_td043->power_on_resume = tpo_td043->powered_on;
+	tpo_td043_power_off(tpo_td043);
+	tpo_td043->spi_suspended = 1;
+
+	return 0;
+}
+
+static int tpo_td043_spi_resume(struct device *dev)
+{
+	struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "tpo_td043_spi_resume\n");
+
+	if (tpo_td043->power_on_resume) {
+		ret = tpo_td043_power_on(tpo_td043);
+		if (ret)
+			return ret;
+	}
+	tpo_td043->spi_suspended = 0;
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
+	tpo_td043_spi_suspend, tpo_td043_spi_resume);
+
 static struct spi_driver tpo_td043_spi_driver = {
 	.driver = {
 		.name	= "tpo_td043mtea1_panel_spi",
 		.owner	= THIS_MODULE,
+		.pm	= &tpo_td043_spi_pm,
 	},
 	.probe	= tpo_td043_spi_probe,
 	.remove	= __devexit_p(tpo_td043_spi_remove),
-- 
cgit v1.2.3-70-g09d2


From 4306b721ac1e8b79858b38537f0fb5a940a792be Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Tue, 7 Feb 2012 02:13:50 +0200
Subject: OMAPDSS: TPO-TD03MTEA1: update default gamma

Over time better gamma has been determined and tuned with some
equipment so update the defaults. From subjective point of view
dark shades should be better visible.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 741e9d7cec1..d63e5e5dbbf 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -47,7 +47,7 @@
 			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
 
 static const u16 tpo_td043_def_gamma[12] = {
-	106, 200, 289, 375, 460, 543, 625, 705, 785, 864, 942, 1020
+	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
 };
 
 struct tpo_td043_device {
-- 
cgit v1.2.3-70-g09d2


From 709881942d2af6944a59d1b90e73ba8f4d76bd82 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Thu, 16 Feb 2012 09:20:57 -0600
Subject: OMAPDSS: Add DSS feature for HDMI MCLK for audio

Certain OMAP4 revisions (i.e., 4430 ES2.3, 4460, and 4470) use
a pseudo clock (generated from the TMDS clock), MCLK, to drive the
generation of Audio Clock Regeneration packets. Other devices
(i.e., 4430 ES2.[0,2]) use the TMDS clock directly.

This patch adds a new DSS feature for MCLK support. It also rearranges
the omap_dss_features structures to reflect the devices supporting it.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss_features.c | 41 ++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss_features.h |  1 +
 2 files changed, 42 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 656cb69f464..0a926432ccd 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -400,6 +400,23 @@ static const enum dss_feat_id omap4430_es1_0_dss_feat_list[] = {
 	FEAT_FIFO_MERGE,
 };
 
+static const enum dss_feat_id omap4430_es2_0_1_2_dss_feat_list[] = {
+	FEAT_MGR_LCD2,
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_GNQ,
+	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
+};
+
 static const enum dss_feat_id omap4_dss_feat_list[] = {
 	FEAT_MGR_LCD2,
 	FEAT_CORE_CLK_DIV,
@@ -408,6 +425,7 @@ static const enum dss_feat_id omap4_dss_feat_list[] = {
 	FEAT_DSI_VC_OCP_WIDTH,
 	FEAT_DSI_GNQ,
 	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HDMI_AUDIO_USE_MCLK,
 	FEAT_HANDLE_UV_SEPARATE,
 	FEAT_ATTR2,
 	FEAT_CPR,
@@ -493,6 +511,25 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 	.burst_size_unit = 16,
 };
 
+/* For OMAP4430 ES 2.0, 2.1 and 2.2 revisions */
+static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
+	.reg_fields = omap4_dss_reg_fields,
+	.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
+
+	.features = omap4430_es2_0_1_2_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap4430_es2_0_1_2_dss_feat_list),
+
+	.num_mgrs = 3,
+	.num_ovls = 4,
+	.supported_displays = omap4_dss_supported_displays,
+	.supported_color_modes = omap4_dss_supported_color_modes,
+	.overlay_caps = omap4_dss_overlay_caps,
+	.clksrc_names = omap4_dss_clk_source_names,
+	.dss_params = omap4_dss_param_range,
+	.buffer_size_unit = 16,
+	.burst_size_unit = 16,
+};
+
 /* For all the other OMAP4 versions */
 static const struct omap_dss_features omap4_dss_features = {
 	.reg_fields = omap4_dss_reg_fields,
@@ -634,6 +671,10 @@ void dss_features_init(void)
 		omap_current_dss_features = &omap3430_dss_features;
 	else if (omap_rev() == OMAP4430_REV_ES1_0)
 		omap_current_dss_features = &omap4430_es1_0_dss_features;
+	else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+		omap_rev() == OMAP4430_REV_ES2_1 ||
+		omap_rev() == OMAP4430_REV_ES2_2)
+		omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
 	else if (cpu_is_omap44xx())
 		omap_current_dss_features = &omap4_dss_features;
 	else
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 682f091cf02..c332e7ddfce 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -50,6 +50,7 @@ enum dss_feat_id {
 	FEAT_DSI_REVERSE_TXCLKESC,
 	FEAT_DSI_GNQ,
 	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HDMI_AUDIO_USE_MCLK,
 	FEAT_HANDLE_UV_SEPARATE,
 	FEAT_ATTR2,
 	FEAT_VENC_REQUIRES_TV_DAC_CLK,
-- 
cgit v1.2.3-70-g09d2


From d8989d96eb35335e4e464369da7bdb28e8c84a9f Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Tue, 31 Jan 2012 13:36:06 -0600
Subject: OMAPDSS: HDMI: Implement initialization of MCLK

When the MCLK is used to drive the Audio Clock Regeneration packets,
the initialization procedure is to set ACR_CTRL[2] to 0 and then
back again to 1. Also, devices that do not support the MCLK, use
the TMDS clock directly by leaving ACR_CTRL[2] set to 0.

The MLCK clock divisor, mclk_mode, is configured only if MLCK
is used. Such configuration is no longer related to the CTS mode
as in some silicon revisions CTS SW-mode is used along with the MCLK.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 37 ++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index b9b97f172cd..bb784d2329b 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -1068,13 +1068,9 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 	u32 r;
 	void __iomem *av_base = hdmi_av_base(ip_data);
 
-	/* audio clock recovery parameters */
-	r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL);
-	r = FLD_MOD(r, cfg->use_mclk, 2, 2);
-	r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1);
-	r = FLD_MOD(r, cfg->cts_mode, 0, 0);
-	hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r);
-
+	/*
+	 * Parameters for generation of Audio Clock Recovery packets
+	 */
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL1, cfg->n, 7, 0);
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL2, cfg->n >> 8, 7, 0);
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_N_SVAL3, cfg->n >> 16, 7, 0);
@@ -1086,14 +1082,6 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 		REG_FLD_MOD(av_base,
 				HDMI_CORE_AV_CTS_SVAL3, cfg->cts >> 16, 7, 0);
 	} else {
-		/*
-		 * HDMI IP uses this configuration to divide the MCLK to
-		 * update CTS value.
-		 */
-		REG_FLD_MOD(av_base,
-				HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0);
-
-		/* Configure clock for audio packets */
 		REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_1,
 				cfg->aud_par_busclk, 7, 0);
 		REG_FLD_MOD(av_base, HDMI_CORE_AV_AUD_PAR_BUSCLK_2,
@@ -1102,6 +1090,25 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data,
 				(cfg->aud_par_busclk >> 16), 7, 0);
 	}
 
+	/* Set ACR clock divisor */
+	REG_FLD_MOD(av_base,
+			HDMI_CORE_AV_FREQ_SVAL, cfg->mclk_mode, 2, 0);
+
+	r = hdmi_read_reg(av_base, HDMI_CORE_AV_ACR_CTRL);
+	/*
+	 * Use TMDS clock for ACR packets. For devices that use
+	 * the MCLK, this is the first part of the MCLK initialization.
+	 */
+	r = FLD_MOD(r, 0, 2, 2);
+
+	r = FLD_MOD(r, cfg->en_acr_pkt, 1, 1);
+	r = FLD_MOD(r, cfg->cts_mode, 0, 0);
+	hdmi_write_reg(av_base, HDMI_CORE_AV_ACR_CTRL, r);
+
+	/* For devices using MCLK, this completes its initialization. */
+	if (cfg->use_mclk)
+		REG_FLD_MOD(av_base, HDMI_CORE_AV_ACR_CTRL, 1, 2, 2);
+
 	/* Override of SPDIF sample frequency with value in I2S_CHST4 */
 	REG_FLD_MOD(av_base, HDMI_CORE_AV_SPDIF_CTRL,
 						cfg->fs_override, 1, 1);
-- 
cgit v1.2.3-70-g09d2


From f15511e23db4e1deb6bf6a3c88c04ba85434e142 Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Tue, 31 Jan 2012 15:56:16 -0600
Subject: OMAPDSS: HDMI: Modify logic to configure MCLK

The MCLK mode defines a factor to divide the clock that is used to
generate the Audio Clock Regeneration packets, MCLK.

The divisor is not used when the CTS value is calculated by HW.
When the value is calculated by SW, it depends on the silicon
revision.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index ec902b3c2de..012ee49c78d 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -667,13 +667,15 @@ static int hdmi_audio_hw_params(struct snd_pcm_substream *substream,
 	if (dss_has_feature(FEAT_HDMI_CTS_SWMODE)) {
 		core_cfg.aud_par_busclk = 0;
 		core_cfg.cts_mode = HDMI_AUDIO_CTS_MODE_SW;
-		core_cfg.use_mclk = false;
+		core_cfg.use_mclk = dss_has_feature(FEAT_HDMI_AUDIO_USE_MCLK);
 	} else {
 		core_cfg.aud_par_busclk = (((128 * 31) - 1) << 8);
 		core_cfg.cts_mode = HDMI_AUDIO_CTS_MODE_HW;
 		core_cfg.use_mclk = true;
-		core_cfg.mclk_mode = HDMI_AUDIO_MCLK_128FS;
 	}
+
+	if (core_cfg.use_mclk)
+		core_cfg.mclk_mode = HDMI_AUDIO_MCLK_128FS;
 	core_cfg.layout = HDMI_AUDIO_LAYOUT_2CH;
 	core_cfg.en_spdif = false;
 	/* Use sample frequency from channel status word */
-- 
cgit v1.2.3-70-g09d2


From 78145b7a343fe2950478e649e905f557054df884 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 19 Feb 2012 01:23:20 +0000
Subject: viafb: another workaround for OLPCs weird wiring

On OLPC we must not touch this I2C bus or it will hang.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/viafbdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 47911658f68..9cfa92ef6bd 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -1752,8 +1752,10 @@ static void __devinit i2c_bus_probe(struct viafb_shared *shared)
 	shared->i2c_31 = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_31));
 
 	/* FIXME: what is this? */
-	printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n");
-	shared->i2c_2C = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_2C));
+	if (!machine_is_olpc()) {
+		printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n");
+		shared->i2c_2C = via_aux_probe(viafb_find_i2c_adapter(VIA_PORT_2C));
+	}
 
 	printk(KERN_INFO "viafb: Finished I2C bus probing");
 }
-- 
cgit v1.2.3-70-g09d2


From 70a27df1579b0e8d7d478d034980f8a7f8a20d54 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sat, 18 Feb 2012 02:11:06 +0000
Subject: viafb: Fix bug in centering code

Obviously this is a typo and although there were no effects observed
it's probably better to fix it.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index d35ced70139..4d799c89941 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1477,7 +1477,7 @@ static struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
 	timing.hor_sync_end = timing.hor_sync_start + var->hsync_len;
 	timing.hor_total = timing.hor_sync_end + var->left_margin + dx;
 	timing.hor_blank_start = timing.hor_addr + dx;
-	timing.hor_blank_end = timing.hor_total - dy;
+	timing.hor_blank_end = timing.hor_total - dx;
 	timing.ver_addr = cyres;
 	timing.ver_sync_start = timing.ver_addr + var->lower_margin + dy;
 	timing.ver_sync_end = timing.ver_sync_start + var->vsync_len;
-- 
cgit v1.2.3-70-g09d2


From 66564d832f531c6336d6d06b6976e16b249aa532 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:00:38 +0000
Subject: FB: sa1100: avoid section mismatch warnings

WARNING: drivers/video/built-in.o(.devinit.text+0x58): Section mismatch in reference from the function sa1100fb_probe() to the function .init.text:sa1100fb_init_fbinfo()
The function __devinit sa1100fb_probe() references
a function __init sa1100fb_init_fbinfo().
If sa1100fb_init_fbinfo is only used by sa1100fb_probe then
annotate sa1100fb_init_fbinfo with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x258): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x26c): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x270): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x278): Section mismatch in reference from the function sa1100fb_init_fbinfo() to the (unknown reference) .init.data:(unknown)
The function __devinit sa1100fb_init_fbinfo() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by sa1100fb_init_fbinfo then
annotate (unknown) with a matching annotation.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 98d55d0e2da..2cc268c0e89 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -227,7 +227,7 @@ static struct sa1100fb_rgb def_rgb_16 = {
  * takes an RGB666 signal, but we provide it with an RGB565 signal
  * instead (def_rgb_16).
  */
-static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
+static struct sa1100fb_mach_info lq039q2ds54_info __devinitdata = {
 	.pixclock	= 171521,	.bpp		= 16,
 	.xres		= 320,		.yres		= 240,
 
@@ -241,7 +241,7 @@ static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 };
 #else
-static struct sa1100fb_mach_info pal_info __initdata = {
+static struct sa1100fb_mach_info pal_info __devinitdata = {
 	.pixclock	= 67797,	.bpp		= 16,
 	.xres		= 640,		.yres		= 512,
 
@@ -256,7 +256,7 @@ static struct sa1100fb_mach_info pal_info __initdata = {
 #endif
 
 #ifdef CONFIG_SA1100_H3600
-static struct sa1100fb_mach_info h3600_info __initdata = {
+static struct sa1100fb_mach_info h3600_info __devinitdata = {
 	.pixclock	= 174757, 	.bpp		= 16,
 	.xres		= 320,		.yres		= 240,
 
@@ -279,7 +279,7 @@ static struct sa1100fb_rgb h3600_rgb_16 = {
 #endif
 
 #ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __initdata = {
+static struct sa1100fb_mach_info h3100_info __devinitdata = {
 	.pixclock	= 406977, 	.bpp		= 4,
 	.xres		= 320,		.yres		= 240,
 
@@ -297,7 +297,7 @@ static struct sa1100fb_mach_info h3100_info __initdata = {
 #endif
 
 #ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __initdata = {
+static struct sa1100fb_mach_info collie_info __devinitdata = {
 	.pixclock	= 171521,	.bpp		= 16,
 	.xres		= 320,		.yres		= 240,
 
@@ -313,7 +313,7 @@ static struct sa1100fb_mach_info collie_info __initdata = {
 #endif
 
 #ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __initdata = {
+static struct sa1100fb_mach_info lart_grey_info __devinitdata = {
 	.pixclock	= 150000,	.bpp		= 4,
 	.xres		= 320,		.yres		= 240,
 
@@ -329,7 +329,7 @@ static struct sa1100fb_mach_info lart_grey_info __initdata = {
 };
 #endif
 #ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __initdata = {
+static struct sa1100fb_mach_info lart_color_info __devinitdata = {
 	.pixclock	= 150000,	.bpp		= 16,
 	.xres		= 320,		.yres		= 240,
 
@@ -342,7 +342,7 @@ static struct sa1100fb_mach_info lart_color_info __initdata = {
 };
 #endif
 #ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __initdata = {
+static struct sa1100fb_mach_info lart_video_info __devinitdata = {
 	.pixclock	= 39721,	.bpp		= 16,
 	.xres		= 640,		.yres		= 480,
 
@@ -358,7 +358,7 @@ static struct sa1100fb_mach_info lart_video_info __initdata = {
 #endif
 
 #ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __initdata = {
+static struct sa1100fb_mach_info lart_kit01_info __devinitdata = {
 	.pixclock	= 63291,	.bpp		= 16,
 	.xres		= 640,		.yres		= 480,
 
@@ -372,7 +372,7 @@ static struct sa1100fb_mach_info lart_kit01_info __initdata = {
 #endif
 
 #ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __initdata = {
+static struct sa1100fb_mach_info shannon_info __devinitdata = {
 	.pixclock	= 152500,	.bpp		= 8,
 	.xres		= 640,		.yres		= 480,
 
@@ -389,7 +389,7 @@ static struct sa1100fb_mach_info shannon_info __initdata = {
 
 
 
-static struct sa1100fb_mach_info * __init
+static struct sa1100fb_mach_info * __devinit
 sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
 {
 	struct sa1100fb_mach_info *inf = NULL;
@@ -1318,7 +1318,7 @@ static int sa1100fb_resume(struct platform_device *dev)
  *      cache.  Once this area is remapped, all virtual memory
  *      access to the video memory should occur at the new region.
  */
-static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
+static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 {
 	/*
 	 * We reserve one page for the palette, plus the size
@@ -1344,7 +1344,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
 }
 
 /* Fake monspecs to fill in fbinfo structure */
-static struct fb_monspecs monspecs __initdata = {
+static struct fb_monspecs monspecs __devinitdata = {
 	.hfmin	= 30000,
 	.hfmax	= 70000,
 	.vfmin	= 50,
@@ -1352,7 +1352,7 @@ static struct fb_monspecs monspecs __initdata = {
 };
 
 
-static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
+static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 {
 	struct sa1100fb_mach_info *inf;
 	struct sa1100fb_info *fbi;
-- 
cgit v1.2.3-70-g09d2


From 4f7e34f8eff0b3dbbd75cc778b0a363bdb29ac18 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:11:03 +0000
Subject: FB: sa1100: add .owner initializer to driver structure

Annotate the driver structure with the .owner field, to allow the
module to be associated with the driver.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 2cc268c0e89..bac9d4f39da 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1505,6 +1505,7 @@ static struct platform_driver sa1100fb_driver = {
 	.resume		= sa1100fb_resume,
 	.driver		= {
 		.name	= "sa11x0-fb",
+		.owner	= THIS_MODULE,
 	},
 };
 
-- 
cgit v1.2.3-70-g09d2


From 58f5cbf275f8fb9529cba20df2564d370a6107da Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:13:30 +0000
Subject: FB: sa1100: constify rgb structures

The rgb structures should only be read and never written.  Constify
them.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 8 ++++----
 drivers/video/sa1100fb.h | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index bac9d4f39da..a797220fdf5 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -199,21 +199,21 @@
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
 
-static struct sa1100fb_rgb rgb_4 = {
+static const struct sa1100fb_rgb rgb_4 = {
 	.red	= { .offset = 0,  .length = 4, },
 	.green	= { .offset = 0,  .length = 4, },
 	.blue	= { .offset = 0,  .length = 4, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb rgb_8 = {
+static const struct sa1100fb_rgb rgb_8 = {
 	.red	= { .offset = 0,  .length = 8, },
 	.green	= { .offset = 0,  .length = 8, },
 	.blue	= { .offset = 0,  .length = 8, },
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-static struct sa1100fb_rgb def_rgb_16 = {
+static const struct sa1100fb_rgb def_rgb_16 = {
 	.red	= { .offset = 11, .length = 5, },
 	.green	= { .offset = 5,  .length = 6, },
 	.blue	= { .offset = 0,  .length = 5, },
@@ -270,7 +270,7 @@ static struct sa1100fb_mach_info h3600_info __devinitdata = {
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 };
 
-static struct sa1100fb_rgb h3600_rgb_16 = {
+static const struct sa1100fb_rgb h3600_rgb_16 = {
 	.red	= { .offset = 12, .length = 4, },
 	.green	= { .offset = 7,  .length = 4, },
 	.blue	= { .offset = 1,  .length = 4, },
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 1c3b459865d..7a3d66a5516 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -65,7 +65,7 @@ struct sa1100fb_lcd_reg {
 struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
-	struct sa1100fb_rgb	*rgb[NR_RGB];
+	const struct sa1100fb_rgb *rgb[NR_RGB];
 
 	u_int			max_bpp;
 	u_int			max_xres;
-- 
cgit v1.2.3-70-g09d2


From 798892966871077b8c867abf3d491227037dc2eb Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:22:56 +0000
Subject: FB: sa1100: convert printks to dev_xxx()

Use the dev_xxx() macros for driver kernel message output, rather than
open coded printk() with KERN_ levels etc.  Remove DPRINTK().

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 72 +++++++++++++++++++++++-------------------------
 drivers/video/sa1100fb.h |  9 ------
 2 files changed, 34 insertions(+), 47 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index a797220fdf5..ecd7cd4ce41 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -183,10 +183,6 @@
 #include <mach/assabet.h>
 #include <mach/shannon.h>
 
-/*
- * debugging?
- */
-#define DEBUG 0
 /*
  * Complain if VAR is out of range.
  */
@@ -614,7 +610,7 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	var->xres_virtual = max(var->xres_virtual, var->xres);
 	var->yres_virtual = max(var->yres_virtual, var->yres);
 
-	DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+	dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel);
 	switch (var->bits_per_pixel) {
 	case 4:
 		rgbidx = RGB_4;
@@ -638,16 +634,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	var->blue   = fbi->rgb[rgbidx]->blue;
 	var->transp = fbi->rgb[rgbidx]->transp;
 
-	DPRINTK("RGBT length = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n",
 		var->red.length, var->green.length, var->blue.length,
 		var->transp.length);
 
-	DPRINTK("RGBT offset = %d:%d:%d:%d\n",
+	dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n",
 		var->red.offset, var->green.offset, var->blue.offset,
 		var->transp.offset);
 
 #ifdef CONFIG_CPU_FREQ
-	printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
+	dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
 		sa1100fb_display_dma_period(var),
 		cpufreq_get(smp_processor_id()));
 #endif
@@ -683,7 +679,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 	struct fb_var_screeninfo *var = &info->var;
 	unsigned long palette_mem_size;
 
-	DPRINTK("set_par\n");
+	dev_dbg(fbi->dev, "set_par\n");
 
 	if (var->bits_per_pixel == 16)
 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
@@ -704,7 +700,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 
 	palette_mem_size = fbi->palette_size * sizeof(u16);
 
-	DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+	dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size);
 
 	fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
 	fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
@@ -775,7 +771,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info)
 	struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
 	int i;
 
-	DPRINTK("sa1100fb_blank: blank=%d\n", blank);
+	dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank);
 
 	switch (blank) {
 	case FB_BLANK_POWERDOWN:
@@ -863,39 +859,39 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	u_int half_screen_size, yres, pcd;
 	u_long flags;
 
-	DPRINTK("Configuring SA1100 LCD\n");
+	dev_dbg(fbi->dev, "Configuring SA1100 LCD\n");
 
-	DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+	dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,
 		var->left_margin, var->right_margin);
-	DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+	dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n",
 		var->yres, var->vsync_len,
 		var->upper_margin, var->lower_margin);
 
 #if DEBUG_VAR
 	if (var->xres < 16        || var->xres > 1024)
-		printk(KERN_ERR "%s: invalid xres %d\n",
+		dev_err(fbi->dev, "%s: invalid xres %d\n",
 			fbi->fb.fix.id, var->xres);
 	if (var->hsync_len < 1    || var->hsync_len > 64)
-		printk(KERN_ERR "%s: invalid hsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid hsync_len %d\n",
 			fbi->fb.fix.id, var->hsync_len);
 	if (var->left_margin < 1  || var->left_margin > 255)
-		printk(KERN_ERR "%s: invalid left_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid left_margin %d\n",
 			fbi->fb.fix.id, var->left_margin);
 	if (var->right_margin < 1 || var->right_margin > 255)
-		printk(KERN_ERR "%s: invalid right_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid right_margin %d\n",
 			fbi->fb.fix.id, var->right_margin);
 	if (var->yres < 1         || var->yres > 1024)
-		printk(KERN_ERR "%s: invalid yres %d\n",
+		dev_err(fbi->dev, "%s: invalid yres %d\n",
 			fbi->fb.fix.id, var->yres);
 	if (var->vsync_len < 1    || var->vsync_len > 64)
-		printk(KERN_ERR "%s: invalid vsync_len %d\n",
+		dev_err(fbi->dev, "%s: invalid vsync_len %d\n",
 			fbi->fb.fix.id, var->vsync_len);
 	if (var->upper_margin < 0 || var->upper_margin > 255)
-		printk(KERN_ERR "%s: invalid upper_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid upper_margin %d\n",
 			fbi->fb.fix.id, var->upper_margin);
 	if (var->lower_margin < 0 || var->lower_margin > 255)
-		printk(KERN_ERR "%s: invalid lower_margin %d\n",
+		dev_err(fbi->dev, "%s: invalid lower_margin %d\n",
 			fbi->fb.fix.id, var->lower_margin);
 #endif
 
@@ -928,10 +924,10 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 		(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 		(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 
-	DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
-	DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
-	DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
-	DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
+	dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0);
+	dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1);
+	dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2);
+	dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3);
 
 	half_screen_size = var->bits_per_pixel;
 	half_screen_size = half_screen_size * var->xres * var->yres / 16;
@@ -967,7 +963,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
  */
 static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("backlight o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
 
 	if (sa1100fb_backlight_power)
 		sa1100fb_backlight_power(on);
@@ -975,7 +971,7 @@ static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 
 static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
 {
-	DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+	dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
 
 	if (sa1100fb_lcd_power)
 		sa1100fb_lcd_power(on);
@@ -1015,7 +1011,7 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
 
 static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 {
-	DPRINTK("Enabling LCD controller\n");
+	dev_dbg(fbi->dev, "Enabling LCD controller\n");
 
 	/*
 	 * Make sure the mode bits are present in the first palette entry
@@ -1037,19 +1033,19 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 		GPSR |= SHANNON_GPIO_DISP_EN;
 	}
 
-	DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
-	DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
-	DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
-	DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
-	DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
-	DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
+	dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
+	dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
+	dev_dbg(fbi->dev, "LCCR0 = 0x%08lx\n", LCCR0);
+	dev_dbg(fbi->dev, "LCCR1 = 0x%08lx\n", LCCR1);
+	dev_dbg(fbi->dev, "LCCR2 = 0x%08lx\n", LCCR2);
+	dev_dbg(fbi->dev, "LCCR3 = 0x%08lx\n", LCCR3);
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
 	DECLARE_WAITQUEUE(wait, current);
 
-	DPRINTK("Disabling LCD controller\n");
+	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
 	if (machine_is_shannon()) {
 		GPCR |= SHANNON_GPIO_DISP_EN;
@@ -1268,7 +1264,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
 	switch (val) {
 	case CPUFREQ_ADJUST:
 	case CPUFREQ_INCOMPATIBLE:
-		printk(KERN_DEBUG "min dma period: %d ps, "
+		dev_dbg(fbi->dev, "min dma period: %d ps, "
 			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
 			policy->max);
 		/* todo: fill in min/max values */
@@ -1459,7 +1455,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi);
 	if (ret) {
-		printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
+		dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
 		goto failed;
 	}
 
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 7a3d66a5516..b1d5b089ee4 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -129,15 +129,6 @@ struct sa1100fb_info {
 
 #define SA1100_NAME	"SA1100"
 
-/*
- *  Debug macros 
- */
-#if DEBUG
-#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __func__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
 /*
  * Minimum X and Y resolutions
  */
-- 
cgit v1.2.3-70-g09d2


From 531060fc1989a438fbc2c3198f5057c40121ff50 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:49:44 +0000
Subject: FB: sa1100: combine RGB bitfield overrides into sa1100fb_mach_info

Allow the sa1100fb_mach_info structure to carry the RGB bitfield
overrides, rather than requiring them to be separately initialized
in sa1100fb_get_machine_info().

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 21 ++++++++++++++-------
 drivers/video/sa1100fb.h | 22 ++++++++++------------
 2 files changed, 24 insertions(+), 19 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index ecd7cd4ce41..a905e20404f 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -252,6 +252,13 @@ static struct sa1100fb_mach_info pal_info __devinitdata = {
 #endif
 
 #ifdef CONFIG_SA1100_H3600
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+	.red	= { .offset = 12, .length = 4, },
+	.green	= { .offset = 7,  .length = 4, },
+	.blue	= { .offset = 1,  .length = 4, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
 static struct sa1100fb_mach_info h3600_info __devinitdata = {
 	.pixclock	= 174757, 	.bpp		= 16,
 	.xres		= 320,		.yres		= 240,
@@ -264,13 +271,8 @@ static struct sa1100fb_mach_info h3600_info __devinitdata = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
 
-static const struct sa1100fb_rgb h3600_rgb_16 = {
-	.red	= { .offset = 12, .length = 4, },
-	.green	= { .offset = 7,  .length = 4, },
-	.blue	= { .offset = 1,  .length = 4, },
-	.transp	= { .offset = 0,  .length = 0, },
+	.rgb[RGB_16] = &h3600_rgb_16,
 };
 #endif
 
@@ -413,7 +415,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
 #ifdef CONFIG_SA1100_H3600
 	if (machine_is_h3600()) {
 		inf = &h3600_info;
-		fbi->rgb[RGB_16] = &h3600_rgb_16;
 	}
 #endif
 #ifdef CONFIG_SA1100_COLLIE
@@ -1352,6 +1353,7 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 {
 	struct sa1100fb_mach_info *inf;
 	struct sa1100fb_info *fbi;
+	unsigned i;
 
 	fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
 		      GFP_KERNEL);
@@ -1424,6 +1426,11 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 	fbi->fb.fix.smem_len		= fbi->max_xres * fbi->max_yres *
 					  fbi->max_bpp / 8;
 
+	/* Copy the RGB bitfield overrides */
+	for (i = 0; i < NR_RGB; i++)
+		if (inf->rgb[i])
+			fbi->rgb[i] = inf->rgb[i];
+
 	init_waitqueue_head(&fbi->ctrlr_wait);
 	INIT_WORK(&fbi->task, sa1100fb_task);
 	mutex_init(&fbi->ctrlr_lock);
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index b1d5b089ee4..77239b766e5 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,10 +10,12 @@
  * for more details.
  */
 
-/*
- * These are the bitfields for each
- * display depth that we support.
- */
+#define RGB_4	0
+#define RGB_8	1
+#define RGB_16	2
+#define NR_RGB	3
+
+/* These are the bitfields for each display depth that we support. */
 struct sa1100fb_rgb {
 	struct fb_bitfield	red;
 	struct fb_bitfield	green;
@@ -21,9 +23,7 @@ struct sa1100fb_rgb {
 	struct fb_bitfield	transp;
 };
 
-/*
- * This structure describes the machine which we are running on.
- */
+/* This structure describes the machine which we are running on. */
 struct sa1100fb_mach_info {
 	u_long		pixclock;
 
@@ -47,6 +47,9 @@ struct sa1100fb_mach_info {
 
 	u_int		lccr0;
 	u_int		lccr3;
+
+	/* Overrides for the default RGB maps */
+	const struct sa1100fb_rgb *rgb[NR_RGB];
 };
 
 /* Shadows for LCD controller registers */
@@ -57,11 +60,6 @@ struct sa1100fb_lcd_reg {
 	unsigned long lccr3;
 };
 
-#define RGB_4	(0)
-#define RGB_8	(1)
-#define RGB_16	(2)
-#define NR_RGB	3
-
 struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
-- 
cgit v1.2.3-70-g09d2


From 9e6720fb0cfd6edda12b408a66f4ac88e8a82e32 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 10:56:06 +0000
Subject: FB: sa1100: move machine inf structures to <video/sa1100fb.h>

Move the LCD data structures to an include file which can be shared
with the board code in arch/arm/mach-sa1100.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c |  6 ++++-
 drivers/video/sa1100fb.h | 42 ----------------------------------
 include/video/sa1100fb.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+), 43 deletions(-)
 create mode 100644 include/video/sa1100fb.h

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index a905e20404f..8f5557a12ff 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -178,6 +178,8 @@
 #include <linux/mutex.h>
 #include <linux/io.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <mach/assabet.h>
@@ -1388,7 +1390,9 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 	fbi->rgb[RGB_8]		= &rgb_8;
 	fbi->rgb[RGB_16]	= &def_rgb_16;
 
-	inf = sa1100fb_get_machine_info(fbi);
+	inf = dev->platform_data;
+	if (!inf)
+		inf = sa1100fb_get_machine_info(fbi);
 
 	/*
 	 * People just don't seem to get this.  We don't support
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 77239b766e5..9ff9ba9a281 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,48 +10,6 @@
  * for more details.
  */
 
-#define RGB_4	0
-#define RGB_8	1
-#define RGB_16	2
-#define NR_RGB	3
-
-/* These are the bitfields for each display depth that we support. */
-struct sa1100fb_rgb {
-	struct fb_bitfield	red;
-	struct fb_bitfield	green;
-	struct fb_bitfield	blue;
-	struct fb_bitfield	transp;
-};
-
-/* This structure describes the machine which we are running on. */
-struct sa1100fb_mach_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		lccr0;
-	u_int		lccr3;
-
-	/* Overrides for the default RGB maps */
-	const struct sa1100fb_rgb *rgb[NR_RGB];
-};
-
 /* Shadows for LCD controller registers */
 struct sa1100fb_lcd_reg {
 	unsigned long lccr0;
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
new file mode 100644
index 00000000000..e73c813c87f
--- /dev/null
+++ b/include/video/sa1100fb.h
@@ -0,0 +1,59 @@
+/*
+ * StrongARM 1100 LCD Controller Frame Buffer Device
+ *
+ * Copyright (C) 1999 Eric A. Thomas
+ *  Based on acornfb.c Copyright (C) Russell King.
+ *  
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+#ifndef _VIDEO_SA1100FB_H
+#define _VIDEO_SA1100FB_H
+
+#include <linux/fb.h>
+#include <linux/types.h>
+
+#define RGB_4	0
+#define RGB_8	1
+#define RGB_16	2
+#define NR_RGB	3
+
+/* These are the bitfields for each display depth that we support. */
+struct sa1100fb_rgb {
+	struct fb_bitfield	red;
+	struct fb_bitfield	green;
+	struct fb_bitfield	blue;
+	struct fb_bitfield	transp;
+};
+
+/* This structure describes the machine which we are running on. */
+struct sa1100fb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		lccr0;
+	u_int		lccr3;
+
+	/* Overrides for the default RGB maps */
+	const struct sa1100fb_rgb *rgb[NR_RGB];
+};
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From e1b7a72aeb8292502c97b43eceb01aea47ded40f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 11:50:04 +0000
Subject: FB: sa1100: move platform data to platform files

Move platform data out of the sa1100fb driver into the various
platform files themselves.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/assabet.c |  40 +++++++
 arch/arm/mach-sa1100/collie.c  |  17 +++
 arch/arm/mach-sa1100/generic.c |   8 +-
 arch/arm/mach-sa1100/generic.h |   3 +
 arch/arm/mach-sa1100/h3100.c   |  22 +++-
 arch/arm/mach-sa1100/h3600.c   |  31 +++++-
 arch/arm/mach-sa1100/lart.c    |  79 ++++++++++++++
 arch/arm/mach-sa1100/shannon.c |  17 +++
 drivers/video/sa1100fb.c       | 239 ++---------------------------------------
 9 files changed, 218 insertions(+), 238 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76ab4d8..37fb0cd1a29 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -204,6 +206,39 @@ static struct mcp_plat_data assabet_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+#ifndef ASSABET_PAL_VIDEO
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 61,		.upper_margin	= 3,
+	.right_margin	= 9,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+#else
+static struct sa1100fb_mach_info pal_info = {
+	.pixclock	= 67797,	.bpp		= 16,
+	.xres		= 640,		.yres		= 512,
+
+	.hsync_len	= 64,		.vsync_len	= 6,
+	.left_margin	= 125,		.upper_margin	= 70,
+	.right_margin	= 115,		.lower_margin	= 36,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
 static void __init assabet_init(void)
 {
 	/*
@@ -249,6 +284,11 @@ static void __init assabet_init(void)
 #endif
 	}
 
+#ifndef ASSABET_PAL_VIDEO
+	sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+	sa11x0_register_lcd(&pal_video);
+#endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd5652118ed..70f6cdc9e63 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -28,6 +28,8 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -310,6 +312,20 @@ static struct resource collie_flash_resources[] = {
 	}
 };
 
+static struct sa1100fb_mach_info collie_lcd_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 11,		.upper_margin	= 2,
+	.right_margin	= 30,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+
 static void __init collie_init(void)
 {
 	int ret = 0;
@@ -348,6 +364,7 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
+	sa11x0_register_lcd(&collie_lcd_info);
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index bb10ee2cb89..f57808fb182 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -19,6 +19,8 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/div64.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -294,6 +296,11 @@ static struct platform_device sa11x0fb_device = {
 	.resource	= sa11x0fb_resources,
 };
 
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+	sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
 static struct platform_device sa11x0pcmcia_device = {
 	.name		= "sa11x0-pcmcia",
 	.id		= -1,
@@ -356,7 +363,6 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0uart3_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
-	&sa11x0fb_device,
 	&sa11x0rtc_device,
 };
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be3..3b903f42464 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -40,3 +40,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
 void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..1f8a271dc66 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -36,13 +38,26 @@ static void h3100_lcd_power(int enable)
 	}
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+	.pixclock	= 406977, 	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 26,		.vsync_len	= 41,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 4,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 1,
+	.cmap_inverse	= 1,
+
+	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
 
 static void __init h3100_map_io(void)
 {
 	h3xxx_map_io();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
-
 	/* Older bootldrs put GPIO2-9 in alternate mode on the
 	   assumption that they are used for video */
 	GAFR &= ~0x000001fb;
@@ -80,6 +95,9 @@ static void __init h3100_mach_init(void)
 {
 	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
+
+	sa1100fb_lcd_power = h3100_lcd_power;
+	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ec..3dd39bfe348 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -56,11 +58,33 @@ err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
 err1:	return;
 }
 
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+	.red	= { .offset = 12, .length = 4, },
+	.green	= { .offset = 7,  .length = 4, },
+	.blue	= { .offset = 1,  .length = 4, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+	.pixclock	= 174757, 	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 3,		.vsync_len	= 3,
+	.left_margin	= 12,		.upper_margin	= 10,
+	.right_margin	= 17,		.lower_margin	= 1,
+
+	.cmap_static	= 1,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.rgb[RGB_16] = &h3600_rgb_16,
+};
+
+
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
-
-	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
 /*
@@ -121,6 +145,9 @@ static void __init h3600_mach_init(void)
 {
 	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
+
+	sa1100fb_lcd_power = h3600_lcd_power;
+	sa11x0_register_lcd(&h3600_lcd_info);
 	sa11x0_register_irda(&h3600_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..463a322a425 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+	.pixclock	= 150000,	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 1,		.vsync_len	= 1,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 2,		.lower_margin	= 0,
+
+	.cmap_greyscale	= 1,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+	.pixclock	= 150000,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 2,		.vsync_len	= 3,
+	.left_margin	= 69,		.upper_margin	= 14,
+	.right_margin	= 8,		.lower_margin	= 4,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+	.pixclock	= 39721,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 95,		.vsync_len	= 2,
+	.left_margin	= 40,		.upper_margin	= 32,
+	.right_margin	= 24,		.lower_margin	= 11,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+	.pixclock	= 63291,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 64,		.vsync_len	= 3,
+	.left_margin	= 122,		.upper_margin	= 45,
+	.right_margin	= 10,		.lower_margin	= 10,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
 static void __init lart_init(void)
 {
+	struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+	inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+	inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+	inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+	inf = &lart_kit01_info;
+#endif
+
+	if (inf)
+		sa11x0_register_lcd(inf);
+
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0..c695b730bd6 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -57,8 +59,23 @@ static struct mcp_plat_data shannon_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+static struct sa1100fb_mach_info shannon_lcd_info = {
+	.pixclock	= 152500,	.bpp		= 8,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 4,		.vsync_len	= 3,
+	.left_margin	= 2,		.upper_margin	= 0,
+	.right_margin	= 1,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+	.lccr3		= LCCR3_ACBsDiv(512),
+};
+
 static void __init shannon_init(void)
 {
+	sa11x0_register_lcd(&shannon_lcd_info);
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8f5557a12ff..d645c6d5fd9 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -218,235 +218,7 @@ static const struct sa1100fb_rgb def_rgb_16 = {
 	.transp	= { .offset = 0,  .length = 0, },
 };
 
-#ifdef CONFIG_SA1100_ASSABET
-#ifndef ASSABET_PAL_VIDEO
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info __devinitdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 61,		.upper_margin	= 3,
-	.right_margin	= 9,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#else
-static struct sa1100fb_mach_info pal_info __devinitdata = {
-	.pixclock	= 67797,	.bpp		= 16,
-	.xres		= 640,		.yres		= 512,
-
-	.hsync_len	= 64,		.vsync_len	= 6,
-	.left_margin	= 125,		.upper_margin	= 70,
-	.right_margin	= 115,		.lower_margin	= 36,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#endif
-
-#ifdef CONFIG_SA1100_H3600
-static const struct sa1100fb_rgb h3600_rgb_16 = {
-	.red	= { .offset = 12, .length = 4, },
-	.green	= { .offset = 7,  .length = 4, },
-	.blue	= { .offset = 1,  .length = 4, },
-	.transp	= { .offset = 0,  .length = 0, },
-};
-
-static struct sa1100fb_mach_info h3600_info __devinitdata = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.rgb[RGB_16] = &h3600_rgb_16,
-};
-#endif
-
-#ifdef CONFIG_SA1100_H3100
-static struct sa1100fb_mach_info h3100_info __devinitdata = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
 
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef CONFIG_SA1100_COLLIE
-static struct sa1100fb_mach_info collie_info __devinitdata = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 11,		.upper_margin	= 2,
-	.right_margin	= 30,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info __devinitdata = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info __devinitdata = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info __devinitdata = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info __devinitdata = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-#ifdef CONFIG_SA1100_SHANNON
-static struct sa1100fb_mach_info shannon_info __devinitdata = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-#endif
-
-
-
-static struct sa1100fb_mach_info * __devinit
-sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-	/*
-	 *            R        G       B       T
-	 * default  {11,5}, { 5,6}, { 0,5}, { 0,0}
-	 * h3600    {12,4}, { 7,4}, { 1,4}, { 0,0}
-	 * freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
-	 */
-#ifdef CONFIG_SA1100_ASSABET
-	if (machine_is_assabet()) {
-#ifndef ASSABET_PAL_VIDEO
-		inf = &lq039q2ds54_info;
-#else
-		inf = &pal_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_H3100
-	if (machine_is_h3100()) {
-		inf = &h3100_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_H3600
-	if (machine_is_h3600()) {
-		inf = &h3600_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_COLLIE
-	if (machine_is_collie()) {
-		inf = &collie_info;
-	}
-#endif
-#ifdef CONFIG_SA1100_LART
-	if (machine_is_lart()) {
-#ifdef LART_GREY_LCD
-		inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-		inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-		inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-		inf = &lart_kit01_info;
-#endif
-	}
-#endif
-#ifdef CONFIG_SA1100_SHANNON
-	if (machine_is_shannon()) {
-		inf = &shannon_info;
-	}
-#endif
-	return inf;
-}
 
 static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
 static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
@@ -1353,7 +1125,7 @@ static struct fb_monspecs monspecs __devinitdata = {
 
 static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 {
-	struct sa1100fb_mach_info *inf;
+	struct sa1100fb_mach_info *inf = dev->platform_data;
 	struct sa1100fb_info *fbi;
 	unsigned i;
 
@@ -1390,10 +1162,6 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 	fbi->rgb[RGB_8]		= &rgb_8;
 	fbi->rgb[RGB_16]	= &def_rgb_16;
 
-	inf = dev->platform_data;
-	if (!inf)
-		inf = sa1100fb_get_machine_info(fbi);
-
 	/*
 	 * People just don't seem to get this.  We don't support
 	 * anything but correct entries now, so panic if someone
@@ -1447,6 +1215,11 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	struct sa1100fb_info *fbi;
 	int ret, irq;
 
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform LCD data\n");
+		return -EINVAL;
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From 086ada54abaa4316e8603f02410fe8ebc9ba2de1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 12:03:22 +0000
Subject: FB: sa1100: remove global sa1100fb_.*_power function pointers

Now that we have platform data contained within the individual board
code, we can get rid of the global function pointers, placing them
inside the platform data instead.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/assabet.c | 90 ++++++++++++++++++++++++++++--------------
 arch/arm/mach-sa1100/generic.c |  6 ---
 arch/arm/mach-sa1100/generic.h |  3 --
 arch/arm/mach-sa1100/h3100.c   |  3 +-
 arch/arm/mach-sa1100/h3600.c   |  3 +-
 drivers/video/sa1100fb.c       | 32 +++++----------
 drivers/video/sa1100fb.h       |  2 +
 include/video/sa1100fb.h       |  4 ++
 8 files changed, 79 insertions(+), 64 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 37fb0cd1a29..65b0a9a3fb9 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -71,33 +71,6 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
-static void assabet_backlight_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on)
-		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
-	else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight.  When turning the backlight on,
- * we wait 500us after turning it on so we don't cause the
- * supplies to droop when we enable the LCD controller (and
- * cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on) {
-		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
-		udelay(500);
-	} else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-}
-
 
 /*
  * Assabet flash support code.
@@ -206,7 +179,49 @@ static struct mcp_plat_data assabet_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+static void assabet_lcd_set_visual(u32 visual)
+{
+	u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
+
+	if (machine_is_assabet()) {
+#if 1		// phase 4 or newer Assabet's
+		if (is_true_color)
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+#else
+		// older Assabet's
+		if (is_true_color)
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+#endif
+	}
+}
+
 #ifndef ASSABET_PAL_VIDEO
+static void assabet_lcd_backlight_power(int on)
+{
+	if (on)
+		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
+	else
+		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+/*
+ * Turn on/off the backlight.  When turning the backlight on, we wait
+ * 500us after turning it on so we don't cause the supplies to droop
+ * when we enable the LCD controller (and cause a hard reset.)
+ */
+static void assabet_lcd_power(int on)
+{
+	if (on) {
+		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
+		udelay(500);
+	} else
+		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
 /*
  * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
  * takes an RGB666 signal, but we provide it with an RGB565 signal
@@ -224,8 +239,22 @@ static struct sa1100fb_mach_info lq039q2ds54_info = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.backlight_power = assabet_lcd_backlight_power,
+	.lcd_power = assabet_lcd_power,
+	.set_visual = assabet_lcd_set_visual,
 };
 #else
+static void assabet_pal_backlight_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+static void assabet_pal_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
 static struct sa1100fb_mach_info pal_info = {
 	.pixclock	= 67797,	.bpp		= 16,
 	.xres		= 640,		.yres		= 512,
@@ -236,6 +265,10 @@ static struct sa1100fb_mach_info pal_info = {
 
 	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+
+	.backlight_power = assabet_pal_backlight_power,
+	.lcd_power = assabet_pal_power,
+	.set_visual = assabet_lcd_set_visual,
 };
 #endif
 
@@ -266,9 +299,6 @@ static void __init assabet_init(void)
 	PPDR |= PPC_TXD3 | PPC_TXD1;
 	PPSR |= PPC_TXD3 | PPC_TXD1;
 
-	sa1100fb_lcd_power = assabet_lcd_power;
-	sa1100fb_backlight_power = assabet_backlight_power;
-
 	if (machine_has_neponset()) {
 		/*
 		 * Angel sets this, but other bootloaders may not.
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index f57808fb182..9cb4062b1e9 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -374,12 +374,6 @@ static int __init sa1100_init(void)
 
 arch_initcall(sa1100_init);
 
-void (*sa1100fb_backlight_power)(int on);
-void (*sa1100fb_lcd_power)(int on);
-
-EXPORT_SYMBOL(sa1100fb_backlight_power);
-EXPORT_SYMBOL(sa1100fb_lcd_power);
-
 
 /*
  * Common I/O mapping:
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 3b903f42464..5c68be858e0 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *);
 	mi->bank[__nr].start = (__start), \
 	mi->bank[__nr].size = (__size)
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1f8a271dc66..f23e7d0b2fb 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -52,6 +52,8 @@ static struct sa1100fb_mach_info h3100_lcd_info = {
 
 	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.lcd_power = h3100_lcd_power,
 };
 
 static void __init h3100_map_io(void)
@@ -96,7 +98,6 @@ static void __init h3100_mach_init(void)
 	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
 	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 3dd39bfe348..2feac56ec90 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -79,6 +79,8 @@ static struct sa1100fb_mach_info h3600_lcd_info = {
 	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 
 	.rgb[RGB_16] = &h3600_rgb_16,
+
+	.lcd_power = h3600_lcd_power,
 };
 
 
@@ -146,7 +148,6 @@ static void __init h3600_mach_init(void)
 	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
 
-	sa1100fb_lcd_power = h3600_lcd_power;
 	sa11x0_register_lcd(&h3600_lcd_info);
 	sa11x0_register_irda(&h3600_irda_data);
 }
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index d645c6d5fd9..c9f1e7cd95f 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -194,9 +194,6 @@
 
 #include "sa1100fb.h"
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
 static const struct sa1100fb_rgb rgb_4 = {
 	.red	= { .offset = 0,  .length = 4, },
 	.green	= { .offset = 0,  .length = 4, },
@@ -426,22 +423,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	return 0;
 }
 
-static inline void sa1100fb_set_truecolor(u_int is_true_color)
+static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual)
 {
-	if (machine_is_assabet()) {
-#if 1		// phase 4 or newer Assabet's
-		if (is_true_color)
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
-		// older Assabet's
-		if (is_true_color)
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
-	}
+	if (fbi->inf->set_visual)
+		fbi->inf->set_visual(visual);
 }
 
 /*
@@ -483,7 +468,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 	/*
 	 * Set (any) board control register to handle new color depth
 	 */
-	sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+	sa1100fb_set_visual(fbi, fbi->fb.fix.visual);
 	sa1100fb_activate_var(var, fbi);
 
 	return 0;
@@ -740,16 +725,16 @@ static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
 {
 	dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_backlight_power)
-		sa1100fb_backlight_power(on);
+	if (fbi->inf->backlight_power)
+		fbi->inf->backlight_power(on);
 }
 
 static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
 {
 	dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff");
 
-	if (sa1100fb_lcd_power)
-		sa1100fb_lcd_power(on);
+	if (fbi->inf->lcd_power)
+		fbi->inf->lcd_power(on);
 }
 
 static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
@@ -1197,6 +1182,7 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 	fbi->task_state			= (u_char)-1;
 	fbi->fb.fix.smem_len		= fbi->max_xres * fbi->max_yres *
 					  fbi->max_bpp / 8;
+	fbi->inf			= inf;
 
 	/* Copy the RGB bitfield overrides */
 	for (i = 0; i < NR_RGB; i++)
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 9ff9ba9a281..3a634abbec1 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -65,6 +65,8 @@ struct sa1100fb_info {
 	struct notifier_block	freq_transition;
 	struct notifier_block	freq_policy;
 #endif
+
+	const struct sa1100fb_mach_info *inf;
 };
 
 #define TO_INF(ptr,member)	container_of(ptr,struct sa1100fb_info,member)
diff --git a/include/video/sa1100fb.h b/include/video/sa1100fb.h
index e73c813c87f..4ab40965378 100644
--- a/include/video/sa1100fb.h
+++ b/include/video/sa1100fb.h
@@ -54,6 +54,10 @@ struct sa1100fb_mach_info {
 
 	/* Overrides for the default RGB maps */
 	const struct sa1100fb_rgb *rgb[NR_RGB];
+
+	void (*backlight_power)(int);
+	void (*lcd_power)(int);
+	void (*set_visual)(u32);
 };
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From d1a378876c2ab3ea119eea502e8d48e25ef253e4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 12:21:18 +0000
Subject: FB: sa1100: remove assabet specific initialization

Remove the assabet specific initialization for PAL output mode -
we call the lcd_power function before we enable the LCD controller,
which will disable the LCD panel to prevent it receiving incorrect
timings.  Therefore, this setup here is redundant.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index c9f1e7cd95f..f6e27f4da1d 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -182,7 +182,6 @@
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <mach/assabet.h>
 #include <mach/shannon.h>
 
 /*
@@ -190,8 +189,6 @@
  */
 #define DEBUG_VAR 1
 
-#undef ASSABET_PAL_VIDEO
-
 #include "sa1100fb.h"
 
 static const struct sa1100fb_rgb rgb_4 = {
@@ -1229,11 +1226,6 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
-#ifdef ASSABET_PAL_VIDEO
-	if (machine_is_assabet())
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-#endif
-
 	/*
 	 * This makes sure that our colour bitfield
 	 * descriptors are correctly initialised.
-- 
cgit v1.2.3-70-g09d2


From ba5fd193f4fd35e5e1771de15cc1aba11d19590d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 14 Jan 2012 12:32:14 +0000
Subject: FB: sa1100: use inf members directly

Now that the LCD information is available while the driver is loaded,
we don't need to cache that information into our driver private data
structure.  Get rid of it.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 31 ++++++++++++-------------------
 drivers/video/sa1100fb.h | 10 ----------
 2 files changed, 12 insertions(+), 29 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index f6e27f4da1d..d1d97cab24c 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -298,7 +298,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 * is what you poke into the framebuffer to produce the
 	 * colour you requested.
 	 */
-	if (fbi->cmap_inverse) {
+	if (fbi->inf->cmap_inverse) {
 		red   = 0xffff - red;
 		green = 0xffff - green;
 		blue  = 0xffff - blue;
@@ -372,10 +372,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		var->xres = MIN_XRES;
 	if (var->yres < MIN_YRES)
 		var->yres = MIN_YRES;
-	if (var->xres > fbi->max_xres)
-		var->xres = fbi->max_xres;
-	if (var->yres > fbi->max_yres)
-		var->yres = fbi->max_yres;
+	if (var->xres > fbi->inf->xres)
+		var->xres = fbi->inf->xres;
+	if (var->yres > fbi->inf->yres)
+		var->yres = fbi->inf->yres;
 	var->xres_virtual = max(var->xres_virtual, var->xres);
 	var->yres_virtual = max(var->yres_virtual, var->yres);
 
@@ -440,7 +440,7 @@ static int sa1100fb_set_par(struct fb_info *info)
 
 	if (var->bits_per_pixel == 16)
 		fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
-	else if (!fbi->cmap_static)
+	else if (!fbi->inf->cmap_static)
 		fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 	else {
 		/*
@@ -481,7 +481,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
 	/*
 	 * Make sure the user isn't doing something stupid.
 	 */
-	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
+	if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static))
 		return -EINVAL;
 
 	return gen_set_cmap(cmap, kspc, con, info);
@@ -652,7 +652,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 			fbi->fb.fix.id, var->lower_margin);
 #endif
 
-	new_regs.lccr0 = fbi->lccr0 |
+	new_regs.lccr0 = fbi->inf->lccr0 |
 		LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
 		LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
 
@@ -667,7 +667,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * the YRES parameter.
 	 */
 	yres = var->yres;
-	if (fbi->lccr0 & LCCR0_Dual)
+	if (fbi->inf->lccr0 & LCCR0_Dual)
 		yres /= 2;
 
 	new_regs.lccr2 =
@@ -677,7 +677,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 		LCCR2_EndFrmDel(var->lower_margin);
 
 	pcd = get_pcd(var->pixclock, cpufreq_get(0));
-	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
+	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
 		(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 		(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 
@@ -1154,13 +1154,10 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 		panic("sa1100fb error: invalid LCCR3 fields set or zero "
 			"pixclock.");
 
-	fbi->max_xres			= inf->xres;
 	fbi->fb.var.xres		= inf->xres;
 	fbi->fb.var.xres_virtual	= inf->xres;
-	fbi->max_yres			= inf->yres;
 	fbi->fb.var.yres		= inf->yres;
 	fbi->fb.var.yres_virtual	= inf->yres;
-	fbi->max_bpp			= inf->bpp;
 	fbi->fb.var.bits_per_pixel	= inf->bpp;
 	fbi->fb.var.pixclock		= inf->pixclock;
 	fbi->fb.var.hsync_len		= inf->hsync_len;
@@ -1171,14 +1168,10 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 	fbi->fb.var.lower_margin	= inf->lower_margin;
 	fbi->fb.var.sync		= inf->sync;
 	fbi->fb.var.grayscale		= inf->cmap_greyscale;
-	fbi->cmap_inverse		= inf->cmap_inverse;
-	fbi->cmap_static		= inf->cmap_static;
-	fbi->lccr0			= inf->lccr0;
-	fbi->lccr3			= inf->lccr3;
 	fbi->state			= C_STARTUP;
 	fbi->task_state			= (u_char)-1;
-	fbi->fb.fix.smem_len		= fbi->max_xres * fbi->max_yres *
-					  fbi->max_bpp / 8;
+	fbi->fb.fix.smem_len		= inf->xres * inf->yres *
+					  inf->bpp / 8;
 	fbi->inf			= inf;
 
 	/* Copy the RGB bitfield overrides */
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index 3a634abbec1..e968e1d6952 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -23,10 +23,6 @@ struct sa1100fb_info {
 	struct device		*dev;
 	const struct sa1100fb_rgb *rgb[NR_RGB];
 
-	u_int			max_bpp;
-	u_int			max_xres;
-	u_int			max_yres;
-
 	/*
 	 * These are the addresses we mapped
 	 * the framebuffer memory region to.
@@ -44,12 +40,6 @@ struct sa1100fb_info {
 	dma_addr_t		dbar1;
 	dma_addr_t		dbar2;
 
-	u_int			lccr0;
-	u_int			lccr3;
-	u_int			cmap_inverse:1,
-				cmap_static:1,
-				unused:30;
-
 	u_int			reg_lccr0;
 	u_int			reg_lccr1;
 	u_int			reg_lccr2;
-- 
cgit v1.2.3-70-g09d2


From 058502eb38a0f687e5af37209488d03656f87ffe Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Jan 2012 12:52:59 +0000
Subject: FB: sa1100: make GPIO configuration setting safe

The sa1100fb driver needs to set the GPIO direction and alternate
function register according to the panel that we're driving.  We've
done this in the driver by read-modify-writing the register, which
may cause problems with races.  Fix this with a minimal change.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index d1d97cab24c..b644f0f1268 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -761,8 +761,19 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
 	}
 
 	if (mask) {
+		unsigned long flags;
+
+		/*
+		 * SA-1100 requires the GPIO direction register set
+		 * appropriately for the alternate function.  Hence
+		 * we set it here via bitmask rather than excessive
+		 * fiddling via the GPIO subsystem - and even then
+		 * we'll still have to deal with GAFR.
+		 */
+		local_irq_save(flags);
 		GPDR |= mask;
 		GAFR |= mask;
+		local_irq_restore(flags);
 	}
 }
 
-- 
cgit v1.2.3-70-g09d2


From 9bb13eed37cc17fd176346c2866e2584772953bb Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Jan 2012 13:47:14 +0000
Subject: FB: sa11x0: fix shannon GPSR/GPCR accesses

The GPIO set and clear registers should only be written, rather than
read, modified, and written.  A read-modify-write will have undesired
side effects.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/sa1100fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index b644f0f1268..f3f55eb61ca 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -798,7 +798,7 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 
 	if (machine_is_shannon()) {
 		GPDR |= SHANNON_GPIO_DISP_EN;
-		GPSR |= SHANNON_GPIO_DISP_EN;
+		GPSR = SHANNON_GPIO_DISP_EN;
 	}
 
 	dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
@@ -816,7 +816,7 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
 	if (machine_is_shannon()) {
-		GPCR |= SHANNON_GPIO_DISP_EN;
+		GPCR = SHANNON_GPIO_DISP_EN;
 	}	
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
-- 
cgit v1.2.3-70-g09d2


From 00d94979c37fcba3486e9cc76a2eee750172a6a4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Jan 2012 13:51:04 +0000
Subject: FB: sa11x0: convert shannon display enable accesses to use GPIO
 subsystem

Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/include/mach/shannon.h |  2 +-
 drivers/video/sa1100fb.c                    | 24 ++++++++++++++++--------
 2 files changed, 17 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index ec27d6e1214..a0d1114c45e 100644
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -21,7 +21,7 @@
 #define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
 #define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
 #define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+#define SHANNON_GPIO_DISP_EN		22		/* out */
 /* XXX GPIO 23 unaccounted for */
 #define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
 #define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index f3f55eb61ca..379b2c5000a 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -173,6 +173,7 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
@@ -796,10 +797,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	DBAR2 = fbi->dbar2;
 	LCCR0 |= LCCR0_LEN;
 
-	if (machine_is_shannon()) {
-		GPDR |= SHANNON_GPIO_DISP_EN;
-		GPSR = SHANNON_GPIO_DISP_EN;
-	}
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
 
 	dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
 	dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
@@ -815,9 +814,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-	if (machine_is_shannon()) {
-		GPCR = SHANNON_GPIO_DISP_EN;
-	}	
+	if (machine_is_shannon())
+		gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
 
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1230,6 +1228,13 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
+	if (machine_is_shannon()) {
+		ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+			GPIOF_OUT_INIT_LOW, "display enable");
+		if (ret)
+			goto err_free_irq;
+	}
+
 	/*
 	 * This makes sure that our colour bitfield
 	 * descriptors are correctly initialised.
@@ -1240,7 +1245,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0)
-		goto err_free_irq;
+		goto err_reg_fb;
 
 #ifdef CONFIG_CPU_FREQ
 	fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
@@ -1252,6 +1257,9 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	/* This driver cannot be unloaded at the moment */
 	return 0;
 
+ err_reg_fb:
+	if (machine_is_shannon())
+		gpio_free(SHANNON_GPIO_DISP_EN);
  err_free_irq:
 	free_irq(irq, fbi);
  failed:
-- 
cgit v1.2.3-70-g09d2


From fdcb68884b3b0def9cc410d07adbafe7c3a9e537 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 10 May 2011 17:31:20 +0300
Subject: OMAPFB: remove old blizzard driver

N8x0's blizzard driver has been ported to new omapdss driver, so we can
now remove the old blizzard driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/plat-omap/include/plat/blizzard.h |   12 -
 drivers/video/omap/Kconfig                 |    7 -
 drivers/video/omap/Makefile                |    1 -
 drivers/video/omap/blizzard.c              | 1648 ----------------------------
 drivers/video/omap/omapfb_main.c           |    4 -
 5 files changed, 1672 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/plat/blizzard.h
 delete mode 100644 drivers/video/omap/blizzard.c

(limited to 'drivers/video')

diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
deleted file mode 100644
index 56e7f2e7d12..00000000000
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _BLIZZARD_H
-#define _BLIZZARD_H
-
-struct blizzard_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
-	unsigned	te_connected:1;
-};
-
-#endif
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 84ff23208c2..ab234d59711 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -23,13 +23,6 @@ config FB_OMAP_LCDC_HWA742
 	  Say Y here if you want to have support for the external
 	  Epson HWA742 LCD controller.
 
-config FB_OMAP_LCDC_BLIZZARD
-	bool "Epson Blizzard LCD controller support"
-	depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
-	help
-	  Say Y here if you want to have support for the external
-	  Epson Blizzard LCD controller.
-
 config FB_OMAP_MANUAL_UPDATE
 	bool "Default to manual update mode"
 	depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index ef78550917f..7042a4ac707 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -14,7 +14,6 @@ objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
 objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
-objs-y$(CONFIG_FB_OMAP_LCDC_BLIZZARD) += blizzard.o
 
 objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
 objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
deleted file mode 100644
index c0504a8a507..00000000000
--- a/drivers/video/omap/blizzard.c
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * Epson Blizzard LCD controller driver
- *
- * Copyright (C) 2004-2005 Nokia Corporation
- * Authors:     Juha Yrjola   <juha.yrjola@nokia.com>
- *	        Imre Deak     <imre.deak@nokia.com>
- * YUV support: Jussi Laako   <jussi.laako@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <plat/dma.h>
-#include <plat/blizzard.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-#define MODULE_NAME				"blizzard"
-
-#define BLIZZARD_REV_CODE			0x00
-#define BLIZZARD_CONFIG				0x02
-#define BLIZZARD_PLL_DIV			0x04
-#define BLIZZARD_PLL_LOCK_RANGE			0x06
-#define BLIZZARD_PLL_CLOCK_SYNTH_0		0x08
-#define BLIZZARD_PLL_CLOCK_SYNTH_1		0x0a
-#define BLIZZARD_PLL_MODE			0x0c
-#define BLIZZARD_CLK_SRC			0x0e
-#define BLIZZARD_MEM_BANK0_ACTIVATE		0x10
-#define BLIZZARD_MEM_BANK0_STATUS		0x14
-#define BLIZZARD_PANEL_CONFIGURATION		0x28
-#define BLIZZARD_HDISP				0x2a
-#define BLIZZARD_HNDP				0x2c
-#define BLIZZARD_VDISP0				0x2e
-#define BLIZZARD_VDISP1				0x30
-#define BLIZZARD_VNDP				0x32
-#define BLIZZARD_HSW				0x34
-#define BLIZZARD_VSW				0x38
-#define BLIZZARD_DISPLAY_MODE			0x68
-#define BLIZZARD_INPUT_WIN_X_START_0		0x6c
-#define BLIZZARD_DATA_SOURCE_SELECT		0x8e
-#define BLIZZARD_DISP_MEM_DATA_PORT		0x90
-#define BLIZZARD_DISP_MEM_READ_ADDR0		0x92
-#define BLIZZARD_POWER_SAVE			0xE6
-#define BLIZZARD_NDISP_CTRL_STATUS		0xE8
-
-/* Data source select */
-/* For S1D13745 */
-#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND	0x00
-#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE	0x01
-#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE	0x04
-#define BLIZZARD_SRC_DISABLE_OVERLAY		0x05
-/* For S1D13744 */
-#define BLIZZARD_SRC_WRITE_LCD			0x00
-#define BLIZZARD_SRC_BLT_LCD			0x06
-
-#define BLIZZARD_COLOR_RGB565			0x01
-#define BLIZZARD_COLOR_YUV420			0x09
-
-#define BLIZZARD_VERSION_S1D13745		0x01	/* Hailstorm */
-#define BLIZZARD_VERSION_S1D13744		0x02	/* Blizzard */
-
-#define BLIZZARD_AUTO_UPDATE_TIME		(HZ / 20)
-
-/* Reserve 4 request slots for requests in irq context */
-#define REQ_POOL_SIZE			24
-#define IRQ_REQ_POOL_SIZE		4
-
-#define REQ_FROM_IRQ_POOL 0x01
-
-#define REQ_COMPLETE	0
-#define REQ_PENDING	1
-
-struct blizzard_reg_list {
-	int	start;
-	int	end;
-};
-
-/* These need to be saved / restored separately from the rest. */
-static const struct blizzard_reg_list blizzard_pll_regs[] = {
-	{
-		.start	= 0x04,		/* Don't save PLL ctrl (0x0C) */
-		.end	= 0x0a,
-	},
-	{
-		.start	= 0x0e,		/* Clock configuration */
-		.end	= 0x0e,
-	},
-};
-
-static const struct blizzard_reg_list blizzard_gen_regs[] = {
-	{
-		.start	= 0x18,		/* SDRAM control */
-		.end	= 0x20,
-	},
-	{
-		.start	= 0x28,		/* LCD Panel configuration */
-		.end	= 0x5a,		/* HSSI interface, TV configuration */
-	},
-};
-
-static u8 blizzard_reg_cache[0x5a / 2];
-
-struct update_param {
-	int	plane;
-	int	x, y, width, height;
-	int	out_x, out_y;
-	int	out_width, out_height;
-	int	color_mode;
-	int	bpp;
-	int	flags;
-};
-
-struct blizzard_request {
-	struct list_head entry;
-	unsigned int	 flags;
-
-	int		 (*handler)(struct blizzard_request *req);
-	void		 (*complete)(void *data);
-	void		 *complete_data;
-
-	union {
-		struct update_param	update;
-		struct completion	*sync;
-	} par;
-};
-
-struct plane_info {
-	unsigned long offset;
-	int pos_x, pos_y;
-	int width, height;
-	int out_width, out_height;
-	int scr_width;
-	int color_mode;
-	int bpp;
-};
-
-struct blizzard_struct {
-	enum omapfb_update_mode	update_mode;
-	enum omapfb_update_mode	update_mode_before_suspend;
-
-	struct timer_list	auto_update_timer;
-	int			stop_auto_update;
-	struct omapfb_update_window	auto_update_window;
-	int			enabled_planes;
-	int			vid_nonstd_color;
-	int			vid_scaled;
-	int			last_color_mode;
-	int			zoom_on;
-	int			zoom_area_gx1;
-	int			zoom_area_gx2;
-	int			zoom_area_gy1;
-	int			zoom_area_gy2;
-	int			screen_width;
-	int			screen_height;
-	unsigned		te_connected:1;
-	unsigned		vsync_only:1;
-
-	struct plane_info	plane[OMAPFB_PLANE_NUM];
-
-	struct blizzard_request	req_pool[REQ_POOL_SIZE];
-	struct list_head	pending_req_list;
-	struct list_head	free_req_list;
-	struct semaphore	req_sema;
-	spinlock_t		req_lock;
-
-	unsigned long		sys_ck_rate;
-	struct extif_timings	reg_timings, lut_timings;
-
-	u32			max_transmit_size;
-	u32			extif_clk_period;
-	int			extif_clk_div;
-	unsigned long		pix_tx_time;
-	unsigned long		line_upd_time;
-
-	struct omapfb_device	*fbdev;
-	struct lcd_ctrl_extif	*extif;
-	const struct lcd_ctrl	*int_ctrl;
-
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
-
-	int			version;
-} blizzard;
-
-struct lcd_ctrl blizzard_ctrl;
-
-static u8 blizzard_read_reg(u8 reg)
-{
-	u8 data;
-
-	blizzard.extif->set_bits_per_cycle(8);
-	blizzard.extif->write_command(&reg, 1);
-	blizzard.extif->read_data(&data, 1);
-
-	return data;
-}
-
-static void blizzard_write_reg(u8 reg, u8 val)
-{
-	blizzard.extif->set_bits_per_cycle(8);
-	blizzard.extif->write_command(&reg, 1);
-	blizzard.extif->write_data(&val, 1);
-}
-
-static void blizzard_restart_sdram(void)
-{
-	unsigned long tmo;
-
-	blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 0);
-	udelay(50);
-	blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 1);
-	tmo = jiffies + msecs_to_jiffies(200);
-	while (!(blizzard_read_reg(BLIZZARD_MEM_BANK0_STATUS) & 0x01)) {
-		if (time_after(jiffies, tmo)) {
-			dev_err(blizzard.fbdev->dev,
-					"s1d1374x: SDRAM not ready\n");
-			break;
-		}
-		msleep(1);
-	}
-}
-
-static void blizzard_stop_sdram(void)
-{
-	blizzard_write_reg(BLIZZARD_MEM_BANK0_ACTIVATE, 0);
-}
-
-/* Wait until the last window was completely written into the controllers
- * SDRAM and we can start transferring the next window.
- */
-static void blizzard_wait_line_buffer(void)
-{
-	unsigned long tmo = jiffies + msecs_to_jiffies(30);
-
-	while (blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS) & (1 << 7)) {
-		if (time_after(jiffies, tmo)) {
-			if (printk_ratelimit())
-				dev_err(blizzard.fbdev->dev,
-					"s1d1374x: line buffer not ready\n");
-			break;
-		}
-	}
-}
-
-/* Wait until the YYC color space converter is idle. */
-static void blizzard_wait_yyc(void)
-{
-	unsigned long tmo = jiffies + msecs_to_jiffies(30);
-
-	while (blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS) & (1 << 4)) {
-		if (time_after(jiffies, tmo)) {
-			if (printk_ratelimit())
-				dev_err(blizzard.fbdev->dev,
-					"s1d1374x: YYC not ready\n");
-			break;
-		}
-	}
-}
-
-static void disable_overlay(void)
-{
-	blizzard_write_reg(BLIZZARD_DATA_SOURCE_SELECT,
-				BLIZZARD_SRC_DISABLE_OVERLAY);
-}
-
-static void set_window_regs(int x_start, int y_start, int x_end, int y_end,
-			    int x_out_start, int y_out_start,
-			    int x_out_end, int y_out_end, int color_mode,
-			    int zoom_off, int flags)
-{
-	u8 tmp[18];
-	u8 cmd;
-
-	x_end--;
-	y_end--;
-	tmp[0] = x_start;
-	tmp[1] = x_start >> 8;
-	tmp[2] = y_start;
-	tmp[3] = y_start >> 8;
-	tmp[4] = x_end;
-	tmp[5] = x_end >> 8;
-	tmp[6] = y_end;
-	tmp[7] = y_end >> 8;
-
-	x_out_end--;
-	y_out_end--;
-	tmp[8]  = x_out_start;
-	tmp[9]  = x_out_start >> 8;
-	tmp[10] = y_out_start;
-	tmp[11] = y_out_start >> 8;
-	tmp[12] = x_out_end;
-	tmp[13] = x_out_end >> 8;
-	tmp[14] = y_out_end;
-	tmp[15] = y_out_end >> 8;
-
-	tmp[16] = color_mode;
-	if (zoom_off && blizzard.version == BLIZZARD_VERSION_S1D13745)
-		tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
-	else if (flags & OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY)
-		tmp[17] = BLIZZARD_SRC_WRITE_OVERLAY_ENABLE;
-	else
-		tmp[17] = blizzard.version == BLIZZARD_VERSION_S1D13744 ?
-				BLIZZARD_SRC_WRITE_LCD :
-				BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
-
-	blizzard.extif->set_bits_per_cycle(8);
-	cmd = BLIZZARD_INPUT_WIN_X_START_0;
-	blizzard.extif->write_command(&cmd, 1);
-	blizzard.extif->write_data(tmp, 18);
-}
-
-static void enable_tearsync(int y, int width, int height, int screen_height,
-			    int out_height, int force_vsync)
-{
-	u8 b;
-
-	b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
-	b |= 1 << 3;
-	blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
-
-	if (likely(blizzard.vsync_only || force_vsync)) {
-		blizzard.extif->enable_tearsync(1, 0);
-		return;
-	}
-
-	if (width * blizzard.pix_tx_time < blizzard.line_upd_time) {
-		blizzard.extif->enable_tearsync(1, 0);
-		return;
-	}
-
-	if ((width * blizzard.pix_tx_time / 1000) * height <
-	    (y + out_height) * (blizzard.line_upd_time / 1000)) {
-		blizzard.extif->enable_tearsync(1, 0);
-		return;
-	}
-
-	blizzard.extif->enable_tearsync(1, y + 1);
-}
-
-static void disable_tearsync(void)
-{
-	u8 b;
-
-	blizzard.extif->enable_tearsync(0, 0);
-	b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
-	b &= ~(1 << 3);
-	blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
-	b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
-}
-
-static inline void set_extif_timings(const struct extif_timings *t);
-
-static inline struct blizzard_request *alloc_req(void)
-{
-	unsigned long flags;
-	struct blizzard_request *req;
-	int req_flags = 0;
-
-	if (!in_interrupt())
-		down(&blizzard.req_sema);
-	else
-		req_flags = REQ_FROM_IRQ_POOL;
-
-	spin_lock_irqsave(&blizzard.req_lock, flags);
-	BUG_ON(list_empty(&blizzard.free_req_list));
-	req = list_entry(blizzard.free_req_list.next,
-			 struct blizzard_request, entry);
-	list_del(&req->entry);
-	spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
-	INIT_LIST_HEAD(&req->entry);
-	req->flags = req_flags;
-
-	return req;
-}
-
-static inline void free_req(struct blizzard_request *req)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&blizzard.req_lock, flags);
-
-	list_move(&req->entry, &blizzard.free_req_list);
-	if (!(req->flags & REQ_FROM_IRQ_POOL))
-		up(&blizzard.req_sema);
-
-	spin_unlock_irqrestore(&blizzard.req_lock, flags);
-}
-
-static void process_pending_requests(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&blizzard.req_lock, flags);
-
-	while (!list_empty(&blizzard.pending_req_list)) {
-		struct blizzard_request *req;
-		void (*complete)(void *);
-		void *complete_data;
-
-		req = list_entry(blizzard.pending_req_list.next,
-				 struct blizzard_request, entry);
-		spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
-		if (req->handler(req) == REQ_PENDING)
-			return;
-
-		complete = req->complete;
-		complete_data = req->complete_data;
-		free_req(req);
-
-		if (complete)
-			complete(complete_data);
-
-		spin_lock_irqsave(&blizzard.req_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&blizzard.req_lock, flags);
-}
-
-static void submit_req_list(struct list_head *head)
-{
-	unsigned long flags;
-	int process = 1;
-
-	spin_lock_irqsave(&blizzard.req_lock, flags);
-	if (likely(!list_empty(&blizzard.pending_req_list)))
-		process = 0;
-	list_splice_init(head, blizzard.pending_req_list.prev);
-	spin_unlock_irqrestore(&blizzard.req_lock, flags);
-
-	if (process)
-		process_pending_requests();
-}
-
-static void request_complete(void *data)
-{
-	struct blizzard_request	*req = (struct blizzard_request *)data;
-	void			(*complete)(void *);
-	void			*complete_data;
-
-	complete = req->complete;
-	complete_data = req->complete_data;
-
-	free_req(req);
-
-	if (complete)
-		complete(complete_data);
-
-	process_pending_requests();
-}
-
-
-static int do_full_screen_update(struct blizzard_request *req)
-{
-	int i;
-	int flags;
-
-	for (i = 0; i < 3; i++) {
-		struct plane_info *p = &blizzard.plane[i];
-		if (!(blizzard.enabled_planes & (1 << i))) {
-			blizzard.int_ctrl->enable_plane(i, 0);
-			continue;
-		}
-		dev_dbg(blizzard.fbdev->dev, "pw %d ph %d\n",
-			p->width, p->height);
-		blizzard.int_ctrl->setup_plane(i,
-				OMAPFB_CHANNEL_OUT_LCD, p->offset,
-				p->scr_width, p->pos_x, p->pos_y,
-				p->width, p->height,
-				p->color_mode);
-		blizzard.int_ctrl->enable_plane(i, 1);
-	}
-
-	dev_dbg(blizzard.fbdev->dev, "sw %d sh %d\n",
-		blizzard.screen_width, blizzard.screen_height);
-	blizzard_wait_line_buffer();
-	flags = req->par.update.flags;
-	if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
-		enable_tearsync(0, blizzard.screen_width,
-				blizzard.screen_height,
-				blizzard.screen_height,
-				blizzard.screen_height,
-				flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
-	else
-		disable_tearsync();
-
-	set_window_regs(0, 0, blizzard.screen_width, blizzard.screen_height,
-			0, 0, blizzard.screen_width, blizzard.screen_height,
-			BLIZZARD_COLOR_RGB565, blizzard.zoom_on, flags);
-	blizzard.zoom_on = 0;
-
-	blizzard.extif->set_bits_per_cycle(16);
-	/* set_window_regs has left the register index at the right
-	 * place, so no need to set it here.
-	 */
-	blizzard.extif->transfer_area(blizzard.screen_width,
-				      blizzard.screen_height,
-				      request_complete, req);
-	return REQ_PENDING;
-}
-
-static int check_1d_intersect(int a1, int a2, int b1, int b2)
-{
-	if (a2 <= b1 || b2 <= a1)
-		return 0;
-	return 1;
-}
-
-/* Setup all planes with an overlapping area with the update window. */
-static int do_partial_update(struct blizzard_request *req, int plane,
-			     int x, int y, int w, int h,
-			     int x_out, int y_out, int w_out, int h_out,
-			     int wnd_color_mode, int bpp)
-{
-	int i;
-	int gx1, gy1, gx2, gy2;
-	int gx1_out, gy1_out, gx2_out, gy2_out;
-	int color_mode;
-	int flags;
-	int zoom_off;
-	int have_zoom_for_this_update = 0;
-
-	/* Global coordinates, relative to pixel 0,0 of the LCD */
-	gx1 = x + blizzard.plane[plane].pos_x;
-	gy1 = y + blizzard.plane[plane].pos_y;
-	gx2 = gx1 + w;
-	gy2 = gy1 + h;
-
-	flags = req->par.update.flags;
-	if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) {
-		gx1_out = gx1;
-		gy1_out = gy1;
-		gx2_out = gx1 + w * 2;
-		gy2_out = gy1 + h * 2;
-	} else {
-		gx1_out = x_out + blizzard.plane[plane].pos_x;
-		gy1_out = y_out + blizzard.plane[plane].pos_y;
-		gx2_out = gx1_out + w_out;
-		gy2_out = gy1_out + h_out;
-	}
-
-	for (i = 0; i < OMAPFB_PLANE_NUM; i++) {
-		struct plane_info *p = &blizzard.plane[i];
-		int px1, py1;
-		int px2, py2;
-		int pw, ph;
-		int pposx, pposy;
-		unsigned long offset;
-
-		if (!(blizzard.enabled_planes & (1 << i))  ||
-		    (wnd_color_mode && i != plane)) {
-			blizzard.int_ctrl->enable_plane(i, 0);
-			continue;
-		}
-		/* Plane coordinates */
-		if (i == plane) {
-			/* Plane in which we are doing the update.
-			 * Local coordinates are the one in the update
-			 * request.
-			 */
-			px1 = x;
-			py1 = y;
-			px2 = x + w;
-			py2 = y + h;
-			pposx = 0;
-			pposy = 0;
-		} else {
-			/* Check if this plane has an overlapping part */
-			px1 = gx1 - p->pos_x;
-			py1 = gy1 - p->pos_y;
-			px2 = gx2 - p->pos_x;
-			py2 = gy2 - p->pos_y;
-			if (px1 >= p->width || py1 >= p->height ||
-			    px2 <= 0 || py2 <= 0) {
-				blizzard.int_ctrl->enable_plane(i, 0);
-				continue;
-			}
-			/* Calculate the coordinates for the overlapping
-			 * part in the plane's local coordinates.
-			 */
-			pposx = -px1;
-			pposy = -py1;
-			if (px1 < 0)
-				px1 = 0;
-			if (py1 < 0)
-				py1 = 0;
-			if (px2 > p->width)
-				px2 = p->width;
-			if (py2 > p->height)
-				py2 = p->height;
-			if (pposx < 0)
-				pposx = 0;
-			if (pposy < 0)
-				pposy = 0;
-		}
-		pw = px2 - px1;
-		ph = py2 - py1;
-		offset = p->offset + (p->scr_width * py1 + px1) * p->bpp / 8;
-		if (wnd_color_mode)
-			/* Window embedded in the plane with a differing
-			 * color mode / bpp. Calculate the number of DMA
-			 * transfer elements in terms of the plane's bpp.
-			 */
-			pw = (pw + 1) * bpp / p->bpp;
-#ifdef VERBOSE
-		dev_dbg(blizzard.fbdev->dev,
-			"plane %d offset %#08lx pposx %d pposy %d "
-			"px1 %d py1 %d pw %d ph %d\n",
-			i, offset, pposx, pposy, px1, py1, pw, ph);
-#endif
-		blizzard.int_ctrl->setup_plane(i,
-				OMAPFB_CHANNEL_OUT_LCD, offset,
-				p->scr_width,
-				pposx, pposy, pw, ph,
-				p->color_mode);
-
-		blizzard.int_ctrl->enable_plane(i, 1);
-	}
-
-	switch (wnd_color_mode) {
-	case OMAPFB_COLOR_YUV420:
-		color_mode = BLIZZARD_COLOR_YUV420;
-		/* Currently only the 16 bits/pixel cycle format is
-		 * supported on the external interface. Adjust the number
-		 * of transfer elements per line for 12bpp format.
-		 */
-		w = (w + 1) * 3 / 4;
-		break;
-	default:
-		color_mode = BLIZZARD_COLOR_RGB565;
-		break;
-	}
-
-	blizzard_wait_line_buffer();
-	if (blizzard.last_color_mode == BLIZZARD_COLOR_YUV420)
-		blizzard_wait_yyc();
-	blizzard.last_color_mode = color_mode;
-	if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
-		enable_tearsync(gy1, w, h,
-				blizzard.screen_height,
-				h_out,
-				flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
-	else
-		disable_tearsync();
-
-	if ((gx2_out - gx1_out) != (gx2 - gx1) ||
-	    (gy2_out - gy1_out) != (gy2 - gy1))
-		have_zoom_for_this_update = 1;
-
-	/* 'background' type of screen update (as opposed to 'destructive')
-	   can be used to disable scaling if scaling is active */
-	zoom_off = blizzard.zoom_on && !have_zoom_for_this_update &&
-	    (gx1_out == 0) && (gx2_out == blizzard.screen_width) &&
-	    (gy1_out == 0) && (gy2_out == blizzard.screen_height) &&
-	    (gx1 == 0) && (gy1 == 0);
-
-	if (blizzard.zoom_on && !have_zoom_for_this_update && !zoom_off &&
-	    check_1d_intersect(blizzard.zoom_area_gx1, blizzard.zoom_area_gx2,
-			       gx1_out, gx2_out) &&
-	    check_1d_intersect(blizzard.zoom_area_gy1, blizzard.zoom_area_gy2,
-			       gy1_out, gy2_out)) {
-		/* Previous screen update was using scaling, current update
-		 * is not using it. Additionally, current screen update is
-		 * going to overlap with the scaled area. Scaling needs to be
-		 * disabled in order to avoid 'magnifying glass' effect.
-		 * Dummy setup of background window can be used for this.
-		 */
-		set_window_regs(0, 0, blizzard.screen_width,
-				blizzard.screen_height,
-				0, 0, blizzard.screen_width,
-				blizzard.screen_height,
-				BLIZZARD_COLOR_RGB565, 1, flags);
-		blizzard.zoom_on = 0;
-	}
-
-	/* remember scaling settings if we have scaled update */
-	if (have_zoom_for_this_update) {
-		blizzard.zoom_on = 1;
-		blizzard.zoom_area_gx1 = gx1_out;
-		blizzard.zoom_area_gx2 = gx2_out;
-		blizzard.zoom_area_gy1 = gy1_out;
-		blizzard.zoom_area_gy2 = gy2_out;
-	}
-
-	set_window_regs(gx1, gy1, gx2, gy2, gx1_out, gy1_out, gx2_out, gy2_out,
-			color_mode, zoom_off, flags);
-	if (zoom_off)
-		blizzard.zoom_on = 0;
-
-	blizzard.extif->set_bits_per_cycle(16);
-	/* set_window_regs has left the register index at the right
-	 * place, so no need to set it here.
-	 */
-	blizzard.extif->transfer_area(w, h, request_complete, req);
-
-	return REQ_PENDING;
-}
-
-static int send_frame_handler(struct blizzard_request *req)
-{
-	struct update_param *par = &req->par.update;
-	int plane = par->plane;
-
-#ifdef VERBOSE
-	dev_dbg(blizzard.fbdev->dev,
-		"send_frame: x %d y %d w %d h %d "
-		"x_out %d y_out %d w_out %d h_out %d "
-		"color_mode %04x flags %04x planes %01x\n",
-		par->x, par->y, par->width, par->height,
-		par->out_x, par->out_y, par->out_width, par->out_height,
-		par->color_mode, par->flags, blizzard.enabled_planes);
-#endif
-	if (par->flags & OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY)
-		disable_overlay();
-
-	if ((blizzard.enabled_planes & blizzard.vid_nonstd_color) ||
-	     (blizzard.enabled_planes & blizzard.vid_scaled))
-		return do_full_screen_update(req);
-
-	return do_partial_update(req, plane, par->x, par->y,
-				 par->width, par->height,
-				 par->out_x, par->out_y,
-				 par->out_width, par->out_height,
-				 par->color_mode, par->bpp);
-}
-
-static void send_frame_complete(void *data)
-{
-}
-
-#define ADD_PREQ(_x, _y, _w, _h, _x_out, _y_out, _w_out, _h_out) do {	\
-	req = alloc_req();			\
-	req->handler	= send_frame_handler;	\
-	req->complete	= send_frame_complete;	\
-	req->par.update.plane = plane_idx;	\
-	req->par.update.x = _x;			\
-	req->par.update.y = _y;			\
-	req->par.update.width  = _w;		\
-	req->par.update.height = _h;		\
-	req->par.update.out_x = _x_out;		\
-	req->par.update.out_y = _y_out;		\
-	req->par.update.out_width = _w_out;	\
-	req->par.update.out_height = _h_out;	\
-	req->par.update.bpp = bpp;		\
-	req->par.update.color_mode = color_mode;\
-	req->par.update.flags	  = flags;	\
-	list_add_tail(&req->entry, req_head);	\
-} while(0)
-
-static void create_req_list(int plane_idx,
-			    struct omapfb_update_window *win,
-			    struct list_head *req_head)
-{
-	struct blizzard_request *req;
-	int x = win->x;
-	int y = win->y;
-	int width = win->width;
-	int height = win->height;
-	int x_out = win->out_x;
-	int y_out = win->out_y;
-	int width_out = win->out_width;
-	int height_out = win->out_height;
-	int color_mode;
-	int bpp;
-	int flags;
-	unsigned int ystart = y;
-	unsigned int yspan = height;
-	unsigned int ystart_out = y_out;
-	unsigned int yspan_out = height_out;
-
-	flags = win->format & ~OMAPFB_FORMAT_MASK;
-	color_mode = win->format & OMAPFB_FORMAT_MASK;
-	switch (color_mode) {
-	case OMAPFB_COLOR_YUV420:
-		/* Embedded window with different color mode */
-		bpp = 12;
-		/* X, Y, height must be aligned at 2, width at 4 pixels */
-		x &= ~1;
-		y &= ~1;
-		height = yspan = height & ~1;
-		width = width & ~3;
-		break;
-	default:
-		/* Same as the plane color mode */
-		bpp = blizzard.plane[plane_idx].bpp;
-		break;
-	}
-	if (width * height * bpp / 8 > blizzard.max_transmit_size) {
-		yspan = blizzard.max_transmit_size / (width * bpp / 8);
-		yspan_out = yspan * height_out / height;
-		ADD_PREQ(x, ystart, width, yspan, x_out, ystart_out,
-			 width_out, yspan_out);
-		ystart += yspan;
-		ystart_out += yspan_out;
-		yspan = height - yspan;
-		yspan_out = height_out - yspan_out;
-		flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
-	}
-
-	ADD_PREQ(x, ystart, width, yspan, x_out, ystart_out,
-		 width_out, yspan_out);
-}
-
-static void auto_update_complete(void *data)
-{
-	if (!blizzard.stop_auto_update)
-		mod_timer(&blizzard.auto_update_timer,
-			  jiffies + BLIZZARD_AUTO_UPDATE_TIME);
-}
-
-static void blizzard_update_window_auto(unsigned long arg)
-{
-	LIST_HEAD(req_list);
-	struct blizzard_request *last;
-	struct omapfb_plane_struct *plane;
-
-	plane = blizzard.fbdev->fb_info[0]->par;
-	create_req_list(plane->idx,
-			&blizzard.auto_update_window, &req_list);
-	last = list_entry(req_list.prev, struct blizzard_request, entry);
-
-	last->complete = auto_update_complete;
-	last->complete_data = NULL;
-
-	submit_req_list(&req_list);
-}
-
-int blizzard_update_window_async(struct fb_info *fbi,
-				 struct omapfb_update_window *win,
-				 void (*complete_callback)(void *arg),
-				 void *complete_callback_data)
-{
-	LIST_HEAD(req_list);
-	struct blizzard_request *last;
-	struct omapfb_plane_struct *plane = fbi->par;
-
-	if (unlikely(blizzard.update_mode != OMAPFB_MANUAL_UPDATE))
-		return -EINVAL;
-	if (unlikely(!blizzard.te_connected &&
-		     (win->format & OMAPFB_FORMAT_FLAG_TEARSYNC)))
-		return -EINVAL;
-
-	create_req_list(plane->idx, win, &req_list);
-	last = list_entry(req_list.prev, struct blizzard_request, entry);
-
-	last->complete = complete_callback;
-	last->complete_data = (void *)complete_callback_data;
-
-	submit_req_list(&req_list);
-
-	return 0;
-}
-EXPORT_SYMBOL(blizzard_update_window_async);
-
-static int update_full_screen(void)
-{
-	return blizzard_update_window_async(blizzard.fbdev->fb_info[0],
-				     &blizzard.auto_update_window, NULL, NULL);
-
-}
-
-static int blizzard_setup_plane(int plane, int channel_out,
-				  unsigned long offset, int screen_width,
-				  int pos_x, int pos_y, int width, int height,
-				  int color_mode)
-{
-	struct plane_info *p;
-
-#ifdef VERBOSE
-	dev_dbg(blizzard.fbdev->dev,
-		    "plane %d ch_out %d offset %#08lx scr_width %d "
-		    "pos_x %d pos_y %d width %d height %d color_mode %d\n",
-		    plane, channel_out, offset, screen_width,
-		    pos_x, pos_y, width, height, color_mode);
-#endif
-	if ((unsigned)plane > OMAPFB_PLANE_NUM)
-		return -EINVAL;
-	p = &blizzard.plane[plane];
-
-	switch (color_mode) {
-	case OMAPFB_COLOR_YUV422:
-	case OMAPFB_COLOR_YUY422:
-		p->bpp = 16;
-		blizzard.vid_nonstd_color &= ~(1 << plane);
-		break;
-	case OMAPFB_COLOR_YUV420:
-		p->bpp = 12;
-		blizzard.vid_nonstd_color |= 1 << plane;
-		break;
-	case OMAPFB_COLOR_RGB565:
-		p->bpp = 16;
-		blizzard.vid_nonstd_color &= ~(1 << plane);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	p->offset = offset;
-	p->pos_x = pos_x;
-	p->pos_y = pos_y;
-	p->width = width;
-	p->height = height;
-	p->scr_width = screen_width;
-	if (!p->out_width)
-		p->out_width = width;
-	if (!p->out_height)
-		p->out_height = height;
-
-	p->color_mode = color_mode;
-
-	return 0;
-}
-
-static int blizzard_set_scale(int plane, int orig_w, int orig_h,
-			      int out_w, int out_h)
-{
-	struct plane_info *p = &blizzard.plane[plane];
-	int r;
-
-	dev_dbg(blizzard.fbdev->dev,
-		"plane %d orig_w %d orig_h %d out_w %d out_h %d\n",
-		plane, orig_w, orig_h, out_w, out_h);
-	if ((unsigned)plane > OMAPFB_PLANE_NUM)
-		return -ENODEV;
-
-	r = blizzard.int_ctrl->set_scale(plane, orig_w, orig_h, out_w, out_h);
-	if (r < 0)
-		return r;
-
-	p->width = orig_w;
-	p->height = orig_h;
-	p->out_width = out_w;
-	p->out_height = out_h;
-	if (orig_w == out_w && orig_h == out_h)
-		blizzard.vid_scaled &= ~(1 << plane);
-	else
-		blizzard.vid_scaled |= 1 << plane;
-
-	return 0;
-}
-
-static int blizzard_set_rotate(int angle)
-{
-	u32 l;
-
-	l = blizzard_read_reg(BLIZZARD_PANEL_CONFIGURATION);
-	l &= ~0x03;
-
-	switch (angle) {
-	case 0:
-		l = l | 0x00;
-		break;
-	case 90:
-		l = l | 0x03;
-		break;
-	case 180:
-		l = l | 0x02;
-		break;
-	case 270:
-		l = l | 0x01;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	blizzard_write_reg(BLIZZARD_PANEL_CONFIGURATION, l);
-
-	return 0;
-}
-
-static int blizzard_enable_plane(int plane, int enable)
-{
-	if (enable)
-		blizzard.enabled_planes |= 1 << plane;
-	else
-		blizzard.enabled_planes &= ~(1 << plane);
-
-	return 0;
-}
-
-static int sync_handler(struct blizzard_request *req)
-{
-	complete(req->par.sync);
-	return REQ_COMPLETE;
-}
-
-static void blizzard_sync(void)
-{
-	LIST_HEAD(req_list);
-	struct blizzard_request *req;
-	struct completion comp;
-
-	req = alloc_req();
-
-	req->handler = sync_handler;
-	req->complete = NULL;
-	init_completion(&comp);
-	req->par.sync = &comp;
-
-	list_add(&req->entry, &req_list);
-	submit_req_list(&req_list);
-
-	wait_for_completion(&comp);
-}
-
-
-static void blizzard_bind_client(struct omapfb_notifier_block *nb)
-{
-	if (blizzard.update_mode == OMAPFB_MANUAL_UPDATE) {
-		omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_READY);
-	}
-}
-
-static int blizzard_set_update_mode(enum omapfb_update_mode mode)
-{
-	if (unlikely(mode != OMAPFB_MANUAL_UPDATE &&
-		     mode != OMAPFB_AUTO_UPDATE &&
-		     mode != OMAPFB_UPDATE_DISABLED))
-		return -EINVAL;
-
-	if (mode == blizzard.update_mode)
-		return 0;
-
-	dev_info(blizzard.fbdev->dev, "s1d1374x: setting update mode to %s\n",
-			mode == OMAPFB_UPDATE_DISABLED ? "disabled" :
-			(mode == OMAPFB_AUTO_UPDATE ? "auto" : "manual"));
-
-	switch (blizzard.update_mode) {
-	case OMAPFB_MANUAL_UPDATE:
-		omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_DISABLED);
-		break;
-	case OMAPFB_AUTO_UPDATE:
-		blizzard.stop_auto_update = 1;
-		del_timer_sync(&blizzard.auto_update_timer);
-		break;
-	case OMAPFB_UPDATE_DISABLED:
-		break;
-	}
-
-	blizzard.update_mode = mode;
-	blizzard_sync();
-	blizzard.stop_auto_update = 0;
-
-	switch (mode) {
-	case OMAPFB_MANUAL_UPDATE:
-		omapfb_notify_clients(blizzard.fbdev, OMAPFB_EVENT_READY);
-		break;
-	case OMAPFB_AUTO_UPDATE:
-		blizzard_update_window_auto(0);
-		break;
-	case OMAPFB_UPDATE_DISABLED:
-		break;
-	}
-
-	return 0;
-}
-
-static enum omapfb_update_mode blizzard_get_update_mode(void)
-{
-	return blizzard.update_mode;
-}
-
-static inline void set_extif_timings(const struct extif_timings *t)
-{
-	blizzard.extif->set_timings(t);
-}
-
-static inline unsigned long round_to_extif_ticks(unsigned long ps, int div)
-{
-	int bus_tick = blizzard.extif_clk_period * div;
-	return (ps + bus_tick - 1) / bus_tick * bus_tick;
-}
-
-static int calc_reg_timing(unsigned long sysclk, int div)
-{
-	struct extif_timings *t;
-	unsigned long systim;
-
-	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
-	 * AccessTime 2 ns + 12.2 ns (regs),
-	 * WEOffTime = WEOnTime + 1 ns,
-	 * REOffTime = REOnTime + 12 ns (regs),
-	 * CSOffTime = REOffTime + 1 ns
-	 * ReadCycle = 2ns + 2*SYSCLK  (regs),
-	 * WriteCycle = 2*SYSCLK + 2 ns,
-	 * CSPulseWidth = 10 ns */
-
-	systim = 1000000000 / (sysclk / 1000);
-	dev_dbg(blizzard.fbdev->dev,
-		  "Blizzard systim %lu ps extif_clk_period %u div %d\n",
-		  systim, blizzard.extif_clk_period, div);
-
-	t = &blizzard.reg_timings;
-	memset(t, 0, sizeof(*t));
-
-	t->clk_div = div;
-
-	t->cs_on_time = 0;
-	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
-	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
-	t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div);
-	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
-	t->re_off_time = round_to_extif_ticks(t->re_on_time + 13000, div);
-	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
-	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
-	if (t->we_cycle_time < t->we_off_time)
-		t->we_cycle_time = t->we_off_time;
-	t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
-	if (t->re_cycle_time < t->re_off_time)
-		t->re_cycle_time = t->re_off_time;
-	t->cs_pulse_width = 0;
-
-	dev_dbg(blizzard.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n",
-		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
-	dev_dbg(blizzard.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n",
-		 t->we_on_time, t->we_off_time, t->re_cycle_time,
-		 t->we_cycle_time);
-	dev_dbg(blizzard.fbdev->dev, "[reg]rdaccess %d cspulse %d\n",
-		 t->access_time, t->cs_pulse_width);
-
-	return blizzard.extif->convert_timings(t);
-}
-
-static int calc_lut_timing(unsigned long sysclk, int div)
-{
-	struct extif_timings *t;
-	unsigned long systim;
-
-	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
-	 * AccessTime 2 ns + 4 * SYSCLK + 26 (lut),
-	 * WEOffTime = WEOnTime + 1 ns,
-	 * REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut),
-	 * CSOffTime = REOffTime + 1 ns
-	 * ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut),
-	 * WriteCycle = 2*SYSCLK + 2 ns,
-	 * CSPulseWidth = 10 ns */
-
-	systim = 1000000000 / (sysclk / 1000);
-	dev_dbg(blizzard.fbdev->dev,
-		"Blizzard systim %lu ps extif_clk_period %u div %d\n",
-		systim, blizzard.extif_clk_period, div);
-
-	t = &blizzard.lut_timings;
-	memset(t, 0, sizeof(*t));
-
-	t->clk_div = div;
-
-	t->cs_on_time = 0;
-	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
-	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
-	t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
-					      26000, div);
-	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
-	t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
-					      26000, div);
-	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
-	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
-	if (t->we_cycle_time < t->we_off_time)
-		t->we_cycle_time = t->we_off_time;
-	t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div);
-	if (t->re_cycle_time < t->re_off_time)
-		t->re_cycle_time = t->re_off_time;
-	t->cs_pulse_width = 0;
-
-	dev_dbg(blizzard.fbdev->dev,
-		 "[lut]cson %d csoff %d reon %d reoff %d\n",
-		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
-	dev_dbg(blizzard.fbdev->dev,
-		 "[lut]weon %d weoff %d recyc %d wecyc %d\n",
-		 t->we_on_time, t->we_off_time, t->re_cycle_time,
-		 t->we_cycle_time);
-	dev_dbg(blizzard.fbdev->dev, "[lut]rdaccess %d cspulse %d\n",
-		 t->access_time, t->cs_pulse_width);
-
-	return blizzard.extif->convert_timings(t);
-}
-
-static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div)
-{
-	int max_clk_div;
-	int div;
-
-	blizzard.extif->get_clk_info(&blizzard.extif_clk_period, &max_clk_div);
-	for (div = 1; div <= max_clk_div; div++) {
-		if (calc_reg_timing(sysclk, div) == 0)
-			break;
-	}
-	if (div > max_clk_div) {
-		dev_dbg(blizzard.fbdev->dev, "reg timing failed\n");
-		goto err;
-	}
-	*extif_mem_div = div;
-
-	for (div = 1; div <= max_clk_div; div++) {
-		if (calc_lut_timing(sysclk, div) == 0)
-			break;
-	}
-
-	if (div > max_clk_div)
-		goto err;
-
-	blizzard.extif_clk_div = div;
-
-	return 0;
-err:
-	dev_err(blizzard.fbdev->dev, "can't setup timings\n");
-	return -1;
-}
-
-static void calc_blizzard_clk_rates(unsigned long ext_clk,
-				unsigned long *sys_clk, unsigned long *pix_clk)
-{
-	int pix_clk_src;
-	int sys_div = 0, sys_mul = 0;
-	int pix_div;
-
-	pix_clk_src = blizzard_read_reg(BLIZZARD_CLK_SRC);
-	pix_div = ((pix_clk_src >> 3) & 0x1f) + 1;
-	if ((pix_clk_src & (0x3 << 1)) == 0) {
-		/* Source is the PLL */
-		sys_div = (blizzard_read_reg(BLIZZARD_PLL_DIV) & 0x3f) + 1;
-		sys_mul = blizzard_read_reg(BLIZZARD_PLL_CLOCK_SYNTH_0);
-		sys_mul |= ((blizzard_read_reg(BLIZZARD_PLL_CLOCK_SYNTH_1)
-				& 0x0f)	<< 11);
-		*sys_clk = ext_clk * sys_mul / sys_div;
-	} else	/* else source is ext clk, or oscillator */
-		*sys_clk = ext_clk;
-
-	*pix_clk = *sys_clk / pix_div;			/* HZ */
-	dev_dbg(blizzard.fbdev->dev,
-		"ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n",
-		ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul);
-	dev_dbg(blizzard.fbdev->dev, "sys_clk %ld pix_clk %ld\n",
-		*sys_clk, *pix_clk);
-}
-
-static int setup_tearsync(unsigned long pix_clk, int extif_div)
-{
-	int hdisp, vdisp;
-	int hndp, vndp;
-	int hsw, vsw;
-	int hs, vs;
-	int hs_pol_inv, vs_pol_inv;
-	int use_hsvs, use_ndp;
-	u8  b;
-
-	hsw = blizzard_read_reg(BLIZZARD_HSW);
-	vsw = blizzard_read_reg(BLIZZARD_VSW);
-	hs_pol_inv = !(hsw & 0x80);
-	vs_pol_inv = !(vsw & 0x80);
-	hsw = hsw & 0x7f;
-	vsw = vsw & 0x3f;
-
-	hdisp = blizzard_read_reg(BLIZZARD_HDISP) * 8;
-	vdisp = blizzard_read_reg(BLIZZARD_VDISP0) +
-		((blizzard_read_reg(BLIZZARD_VDISP1) & 0x3) << 8);
-
-	hndp = blizzard_read_reg(BLIZZARD_HNDP) & 0x3f;
-	vndp = blizzard_read_reg(BLIZZARD_VNDP);
-
-	/* time to transfer one pixel (16bpp) in ps */
-	blizzard.pix_tx_time = blizzard.reg_timings.we_cycle_time;
-	if (blizzard.extif->get_max_tx_rate != NULL) {
-		/* The external interface might have a rate limitation,
-		 * if so, we have to maximize our transfer rate.
-		 */
-		unsigned long min_tx_time;
-		unsigned long max_tx_rate = blizzard.extif->get_max_tx_rate();
-
-		dev_dbg(blizzard.fbdev->dev, "max_tx_rate %ld HZ\n",
-			max_tx_rate);
-		min_tx_time = 1000000000 / (max_tx_rate / 1000);  /* ps */
-		if (blizzard.pix_tx_time < min_tx_time)
-			blizzard.pix_tx_time = min_tx_time;
-	}
-
-	/* time to update one line in ps */
-	blizzard.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000);
-	blizzard.line_upd_time *= 1000;
-	if (hdisp * blizzard.pix_tx_time > blizzard.line_upd_time)
-		/* transfer speed too low, we might have to use both
-		 * HS and VS */
-		use_hsvs = 1;
-	else
-		/* decent transfer speed, we'll always use only VS */
-		use_hsvs = 0;
-
-	if (use_hsvs && (hs_pol_inv || vs_pol_inv)) {
-		/* HS or'ed with VS doesn't work, use the active high
-		 * TE signal based on HNDP / VNDP */
-		use_ndp = 1;
-		hs_pol_inv = 0;
-		vs_pol_inv = 0;
-		hs = hndp;
-		vs = vndp;
-	} else {
-		/* Use HS or'ed with VS as a TE signal if both are needed
-		 * or VNDP if only vsync is needed. */
-		use_ndp = 0;
-		hs = hsw;
-		vs = vsw;
-		if (!use_hsvs) {
-			hs_pol_inv = 0;
-			vs_pol_inv = 0;
-		}
-	}
-
-	hs = hs * 1000000 / (pix_clk / 1000);		  /* ps */
-	hs *= 1000;
-
-	vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000); /* ps */
-	vs *= 1000;
-
-	if (vs <= hs)
-		return -EDOM;
-	/* set VS to 120% of HS to minimize VS detection time */
-	vs = hs * 12 / 10;
-	/* minimize HS too */
-	if (hs > 10000)
-		hs = 10000;
-
-	b = blizzard_read_reg(BLIZZARD_NDISP_CTRL_STATUS);
-	b &= ~0x3;
-	b |= use_hsvs ? 1 : 0;
-	b |= (use_ndp && use_hsvs) ? 0 : 2;
-	blizzard_write_reg(BLIZZARD_NDISP_CTRL_STATUS, b);
-
-	blizzard.vsync_only = !use_hsvs;
-
-	dev_dbg(blizzard.fbdev->dev,
-		"pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n",
-		pix_clk, blizzard.pix_tx_time, blizzard.line_upd_time);
-	dev_dbg(blizzard.fbdev->dev,
-		"hs %d ps vs %d ps mode %d vsync_only %d\n",
-		hs, vs, b & 0x3, !use_hsvs);
-
-	return blizzard.extif->setup_tearsync(1, hs, vs,
-					      hs_pol_inv, vs_pol_inv,
-					      extif_div);
-}
-
-static void blizzard_get_caps(int plane, struct omapfb_caps *caps)
-{
-	blizzard.int_ctrl->get_caps(plane, caps);
-	caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE |
-		OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE |
-		OMAPFB_CAPS_WINDOW_SCALE |
-		OMAPFB_CAPS_WINDOW_OVERLAY |
-		OMAPFB_CAPS_WINDOW_ROTATE;
-	if (blizzard.te_connected)
-		caps->ctrl |= OMAPFB_CAPS_TEARSYNC;
-	caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) |
-			   (1 << OMAPFB_COLOR_YUV420);
-}
-
-static void _save_regs(const struct blizzard_reg_list *list, int cnt)
-{
-	int i;
-
-	for (i = 0; i < cnt; i++, list++) {
-		int reg;
-		for (reg = list->start; reg <= list->end; reg += 2)
-			blizzard_reg_cache[reg / 2] = blizzard_read_reg(reg);
-	}
-}
-
-static void _restore_regs(const struct blizzard_reg_list *list, int cnt)
-{
-	int i;
-
-	for (i = 0; i < cnt; i++, list++) {
-		int reg;
-		for (reg = list->start; reg <= list->end; reg += 2)
-			blizzard_write_reg(reg, blizzard_reg_cache[reg / 2]);
-	}
-}
-
-static void blizzard_save_all_regs(void)
-{
-	_save_regs(blizzard_pll_regs, ARRAY_SIZE(blizzard_pll_regs));
-	_save_regs(blizzard_gen_regs, ARRAY_SIZE(blizzard_gen_regs));
-}
-
-static void blizzard_restore_pll_regs(void)
-{
-	_restore_regs(blizzard_pll_regs, ARRAY_SIZE(blizzard_pll_regs));
-}
-
-static void blizzard_restore_gen_regs(void)
-{
-	_restore_regs(blizzard_gen_regs, ARRAY_SIZE(blizzard_gen_regs));
-}
-
-static void blizzard_suspend(void)
-{
-	u32 l;
-	unsigned long tmo;
-
-	if (blizzard.last_color_mode) {
-		update_full_screen();
-		blizzard_sync();
-	}
-	blizzard.update_mode_before_suspend = blizzard.update_mode;
-	/* the following will disable clocks as well */
-	blizzard_set_update_mode(OMAPFB_UPDATE_DISABLED);
-
-	blizzard_save_all_regs();
-
-	blizzard_stop_sdram();
-
-	l = blizzard_read_reg(BLIZZARD_POWER_SAVE);
-	/* Standby, Sleep. We assume we use an external clock. */
-	l |= 0x03;
-	blizzard_write_reg(BLIZZARD_POWER_SAVE, l);
-
-	tmo = jiffies + msecs_to_jiffies(100);
-	while (!(blizzard_read_reg(BLIZZARD_PLL_MODE) & (1 << 1))) {
-		if (time_after(jiffies, tmo)) {
-			dev_err(blizzard.fbdev->dev,
-				"s1d1374x: sleep timeout, stopping PLL manually\n");
-			l = blizzard_read_reg(BLIZZARD_PLL_MODE);
-			l &= ~0x03;
-			/* Disable PLL, counter function */
-			l |= 0x2;
-			blizzard_write_reg(BLIZZARD_PLL_MODE, l);
-			break;
-		}
-		msleep(1);
-	}
-
-	if (blizzard.power_down != NULL)
-		blizzard.power_down(blizzard.fbdev->dev);
-}
-
-static void blizzard_resume(void)
-{
-	u32 l;
-
-	if (blizzard.power_up != NULL)
-		blizzard.power_up(blizzard.fbdev->dev);
-
-	l = blizzard_read_reg(BLIZZARD_POWER_SAVE);
-	/* Standby, Sleep */
-	l &= ~0x03;
-	blizzard_write_reg(BLIZZARD_POWER_SAVE, l);
-
-	blizzard_restore_pll_regs();
-	l = blizzard_read_reg(BLIZZARD_PLL_MODE);
-	l &= ~0x03;
-	/* Enable PLL, counter function */
-	l |= 0x1;
-	blizzard_write_reg(BLIZZARD_PLL_MODE, l);
-
-	while (!(blizzard_read_reg(BLIZZARD_PLL_DIV) & (1 << 7)))
-		msleep(1);
-
-	blizzard_restart_sdram();
-
-	blizzard_restore_gen_regs();
-
-	/* Enable display */
-	blizzard_write_reg(BLIZZARD_DISPLAY_MODE, 0x01);
-
-	/* the following will enable clocks as necessary */
-	blizzard_set_update_mode(blizzard.update_mode_before_suspend);
-
-	/* Force a background update */
-	blizzard.zoom_on = 1;
-	update_full_screen();
-	blizzard_sync();
-}
-
-static int blizzard_init(struct omapfb_device *fbdev, int ext_mode,
-			 struct omapfb_mem_desc *req_vram)
-{
-	int r = 0, i;
-	u8 rev, conf;
-	unsigned long ext_clk;
-	int extif_div;
-	unsigned long sys_clk, pix_clk;
-	struct omapfb_platform_data *omapfb_conf;
-	struct blizzard_platform_data *ctrl_conf;
-
-	blizzard.fbdev = fbdev;
-
-	BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
-
-	blizzard.fbdev = fbdev;
-	blizzard.extif = fbdev->ext_if;
-	blizzard.int_ctrl = fbdev->int_ctrl;
-
-	omapfb_conf = fbdev->dev->platform_data;
-	ctrl_conf = omapfb_conf->ctrl_platform_data;
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
-		dev_err(fbdev->dev, "s1d1374x: missing platform data\n");
-		r = -ENOENT;
-		goto err1;
-	}
-
-	blizzard.power_down = ctrl_conf->power_down;
-	blizzard.power_up = ctrl_conf->power_up;
-
-	spin_lock_init(&blizzard.req_lock);
-
-	if ((r = blizzard.int_ctrl->init(fbdev, 1, req_vram)) < 0)
-		goto err1;
-
-	if ((r = blizzard.extif->init(fbdev)) < 0)
-		goto err2;
-
-	blizzard_ctrl.set_color_key = blizzard.int_ctrl->set_color_key;
-	blizzard_ctrl.get_color_key = blizzard.int_ctrl->get_color_key;
-	blizzard_ctrl.setup_mem = blizzard.int_ctrl->setup_mem;
-	blizzard_ctrl.mmap = blizzard.int_ctrl->mmap;
-
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
-	if ((r = calc_extif_timings(ext_clk, &extif_div)) < 0)
-		goto err3;
-
-	set_extif_timings(&blizzard.reg_timings);
-
-	if (blizzard.power_up != NULL)
-		blizzard.power_up(fbdev->dev);
-
-	calc_blizzard_clk_rates(ext_clk, &sys_clk, &pix_clk);
-
-	if ((r = calc_extif_timings(sys_clk, &extif_div)) < 0)
-		goto err3;
-	set_extif_timings(&blizzard.reg_timings);
-
-	if (!(blizzard_read_reg(BLIZZARD_PLL_DIV) & 0x80)) {
-		dev_err(fbdev->dev,
-			"controller not initialized by the bootloader\n");
-		r = -ENODEV;
-		goto err3;
-	}
-
-	if (ctrl_conf->te_connected) {
-		if ((r = setup_tearsync(pix_clk, extif_div)) < 0)
-			goto err3;
-		blizzard.te_connected = 1;
-	}
-
-	rev = blizzard_read_reg(BLIZZARD_REV_CODE);
-	conf = blizzard_read_reg(BLIZZARD_CONFIG);
-
-	switch (rev & 0xfc) {
-	case 0x9c:
-		blizzard.version = BLIZZARD_VERSION_S1D13744;
-		pr_info("omapfb: s1d13744 LCD controller rev %d "
-			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
-		break;
-	case 0xa4:
-		blizzard.version = BLIZZARD_VERSION_S1D13745;
-		pr_info("omapfb: s1d13745 LCD controller rev %d "
-			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
-		break;
-	default:
-		dev_err(fbdev->dev, "invalid s1d1374x revision %02x\n",
-			rev);
-		r = -ENODEV;
-		goto err3;
-	}
-
-	blizzard.max_transmit_size = blizzard.extif->max_transmit_size;
-
-	blizzard.update_mode = OMAPFB_UPDATE_DISABLED;
-
-	blizzard.auto_update_window.x = 0;
-	blizzard.auto_update_window.y = 0;
-	blizzard.auto_update_window.width = fbdev->panel->x_res;
-	blizzard.auto_update_window.height = fbdev->panel->y_res;
-	blizzard.auto_update_window.out_x = 0;
-	blizzard.auto_update_window.out_y = 0;
-	blizzard.auto_update_window.out_width = fbdev->panel->x_res;
-	blizzard.auto_update_window.out_height = fbdev->panel->y_res;
-	blizzard.auto_update_window.format = 0;
-
-	blizzard.screen_width = fbdev->panel->x_res;
-	blizzard.screen_height = fbdev->panel->y_res;
-
-	init_timer(&blizzard.auto_update_timer);
-	blizzard.auto_update_timer.function = blizzard_update_window_auto;
-	blizzard.auto_update_timer.data = 0;
-
-	INIT_LIST_HEAD(&blizzard.free_req_list);
-	INIT_LIST_HEAD(&blizzard.pending_req_list);
-	for (i = 0; i < ARRAY_SIZE(blizzard.req_pool); i++)
-		list_add(&blizzard.req_pool[i].entry, &blizzard.free_req_list);
-	BUG_ON(i <= IRQ_REQ_POOL_SIZE);
-	sema_init(&blizzard.req_sema, i - IRQ_REQ_POOL_SIZE);
-
-	return 0;
-err3:
-	if (blizzard.power_down != NULL)
-		blizzard.power_down(fbdev->dev);
-	blizzard.extif->cleanup();
-err2:
-	blizzard.int_ctrl->cleanup();
-err1:
-	return r;
-}
-
-static void blizzard_cleanup(void)
-{
-	blizzard_set_update_mode(OMAPFB_UPDATE_DISABLED);
-	blizzard.extif->cleanup();
-	blizzard.int_ctrl->cleanup();
-	if (blizzard.power_down != NULL)
-		blizzard.power_down(blizzard.fbdev->dev);
-}
-
-struct lcd_ctrl blizzard_ctrl = {
-	.name			= "blizzard",
-	.init			= blizzard_init,
-	.cleanup		= blizzard_cleanup,
-	.bind_client		= blizzard_bind_client,
-	.get_caps		= blizzard_get_caps,
-	.set_update_mode	= blizzard_set_update_mode,
-	.get_update_mode	= blizzard_get_update_mode,
-	.setup_plane		= blizzard_setup_plane,
-	.set_scale		= blizzard_set_scale,
-	.enable_plane		= blizzard_enable_plane,
-	.set_rotate		= blizzard_set_rotate,
-	.update_window		= blizzard_update_window_async,
-	.sync			= blizzard_sync,
-	.suspend		= blizzard_suspend,
-	.resume			= blizzard_resume,
-};
-
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index b291bfaac80..440a5dd0665 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -104,7 +104,6 @@ static struct platform_device omapdss_device = {
  * ---------------------------------------------------------------------------
  */
 extern struct lcd_ctrl hwa742_ctrl;
-extern struct lcd_ctrl blizzard_ctrl;
 
 static const struct lcd_ctrl *ctrls[] = {
 #ifdef CONFIG_ARCH_OMAP1
@@ -116,9 +115,6 @@ static const struct lcd_ctrl *ctrls[] = {
 #ifdef CONFIG_FB_OMAP_LCDC_HWA742
 	&hwa742_ctrl,
 #endif
-#ifdef CONFIG_FB_OMAP_LCDC_BLIZZARD
-	&blizzard_ctrl,
-#endif
 };
 
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-- 
cgit v1.2.3-70-g09d2


From 8dc50ec7755650859a7bfc17de8846ef1efa24a4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 09:49:49 +0300
Subject: OMAPFB: Remove OMAP2/3 support from old omapfb driver

Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/Kconfig       |    9 +-
 drivers/video/omap/Makefile      |    5 +-
 drivers/video/omap/dispc.c       | 1547 --------------------------------------
 drivers/video/omap/dispc.h       |   46 --
 drivers/video/omap/omapfb.h      |    4 -
 drivers/video/omap/omapfb_main.c |   16 -
 drivers/video/omap/rfbi.c        |  598 ---------------
 7 files changed, 5 insertions(+), 2220 deletions(-)
 delete mode 100644 drivers/video/omap/dispc.c
 delete mode 100644 drivers/video/omap/dispc.h
 delete mode 100644 drivers/video/omap/rfbi.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index ab234d59711..1e7536d9a8f 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,11 +1,10 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
-	depends on FB && (OMAP2_DSS = "n")
-	depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
+	depends on FB
+	depends on ARCH_OMAP1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select TWL4030_CORE if MACH_OMAP_2430SDP
 	help
           Frame buffer driver for OMAP based boards.
 
@@ -42,7 +41,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_BOOTLOADER_INIT
 	bool "Check bootloader initialization"
-	depends on FB_OMAP || FB_OMAP2
+	depends on FB_OMAP
 	help
 	  Say Y here if you want to enable checking if the bootloader has
 	  already initialized the display controller. In this case the
@@ -61,7 +60,7 @@ config FB_OMAP_CONSISTENT_DMA_SIZE
 
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
-        depends on FB_OMAP && ARCH_OMAP1
+        depends on FB_OMAP
         help
           On systems in which video memory is in system memory
           (SDRAM) this will speed up graphics DMA operations.
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 7042a4ac707..79653750448 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for the new OMAP framebuffer device driver
+# Makefile for the OMAP1 framebuffer device driver
 #
 
 obj-$(CONFIG_FB_OMAP) += omapfb.o
@@ -7,11 +7,8 @@ obj-$(CONFIG_FB_OMAP) += omapfb.o
 objs-yy := omapfb_main.o
 
 objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
-objs-y$(CONFIG_ARCH_OMAP3) += dispc.o
 
 objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
-objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
deleted file mode 100644
index 6f61e781f15..00000000000
--- a/drivers/video/omap/dispc.c
+++ /dev/null
@@ -1,1547 +0,0 @@
-/*
- * OMAP2 display controller support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <plat/sram.h>
-#include <plat/board.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-#define MODULE_NAME			"dispc"
-
-#define DSS_BASE			0x48050000
-#define DSS_SYSCONFIG			0x0010
-
-#define DISPC_BASE			0x48050400
-
-/* DISPC common */
-#define DISPC_REVISION			0x0000
-#define DISPC_SYSCONFIG			0x0010
-#define DISPC_SYSSTATUS			0x0014
-#define DISPC_IRQSTATUS			0x0018
-#define DISPC_IRQENABLE			0x001C
-#define DISPC_CONTROL			0x0040
-#define DISPC_CONFIG			0x0044
-#define DISPC_CAPABLE			0x0048
-#define DISPC_DEFAULT_COLOR0		0x004C
-#define DISPC_DEFAULT_COLOR1		0x0050
-#define DISPC_TRANS_COLOR0		0x0054
-#define DISPC_TRANS_COLOR1		0x0058
-#define DISPC_LINE_STATUS		0x005C
-#define DISPC_LINE_NUMBER		0x0060
-#define DISPC_TIMING_H			0x0064
-#define DISPC_TIMING_V			0x0068
-#define DISPC_POL_FREQ			0x006C
-#define DISPC_DIVISOR			0x0070
-#define DISPC_SIZE_DIG			0x0078
-#define DISPC_SIZE_LCD			0x007C
-
-#define DISPC_DATA_CYCLE1		0x01D4
-#define DISPC_DATA_CYCLE2		0x01D8
-#define DISPC_DATA_CYCLE3		0x01DC
-
-/* DISPC GFX plane */
-#define DISPC_GFX_BA0			0x0080
-#define DISPC_GFX_BA1			0x0084
-#define DISPC_GFX_POSITION		0x0088
-#define DISPC_GFX_SIZE			0x008C
-#define DISPC_GFX_ATTRIBUTES		0x00A0
-#define DISPC_GFX_FIFO_THRESHOLD	0x00A4
-#define DISPC_GFX_FIFO_SIZE_STATUS	0x00A8
-#define DISPC_GFX_ROW_INC		0x00AC
-#define DISPC_GFX_PIXEL_INC		0x00B0
-#define DISPC_GFX_WINDOW_SKIP		0x00B4
-#define DISPC_GFX_TABLE_BA		0x00B8
-
-/* DISPC Video plane 1/2 */
-#define DISPC_VID1_BASE			0x00BC
-#define DISPC_VID2_BASE			0x014C
-
-/* Offsets into DISPC_VID1/2_BASE */
-#define DISPC_VID_BA0			0x0000
-#define DISPC_VID_BA1			0x0004
-#define DISPC_VID_POSITION		0x0008
-#define DISPC_VID_SIZE			0x000C
-#define DISPC_VID_ATTRIBUTES		0x0010
-#define DISPC_VID_FIFO_THRESHOLD	0x0014
-#define DISPC_VID_FIFO_SIZE_STATUS	0x0018
-#define DISPC_VID_ROW_INC		0x001C
-#define DISPC_VID_PIXEL_INC		0x0020
-#define DISPC_VID_FIR			0x0024
-#define DISPC_VID_PICTURE_SIZE		0x0028
-#define DISPC_VID_ACCU0			0x002C
-#define DISPC_VID_ACCU1			0x0030
-
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_H0		0x0034
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_HV0		0x0038
-/* 5 elements in 4 byte increments */
-#define DISPC_VID_CONV_COEF0		0x0074
-
-#define DISPC_IRQ_FRAMEMASK		0x0001
-#define DISPC_IRQ_VSYNC			0x0002
-#define DISPC_IRQ_EVSYNC_EVEN		0x0004
-#define DISPC_IRQ_EVSYNC_ODD		0x0008
-#define DISPC_IRQ_ACBIAS_COUNT_STAT	0x0010
-#define DISPC_IRQ_PROG_LINE_NUM		0x0020
-#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	0x0040
-#define DISPC_IRQ_GFX_END_WIN		0x0080
-#define DISPC_IRQ_PAL_GAMMA_MASK	0x0100
-#define DISPC_IRQ_OCP_ERR		0x0200
-#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	0x0400
-#define DISPC_IRQ_VID1_END_WIN		0x0800
-#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	0x1000
-#define DISPC_IRQ_VID2_END_WIN		0x2000
-#define DISPC_IRQ_SYNC_LOST		0x4000
-
-#define DISPC_IRQ_MASK_ALL		0x7fff
-
-#define DISPC_IRQ_MASK_ERROR		(DISPC_IRQ_GFX_FIFO_UNDERFLOW |	\
-					     DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
-					     DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
-					     DISPC_IRQ_SYNC_LOST)
-
-#define RFBI_CONTROL			0x48050040
-
-#define MAX_PALETTE_SIZE		(256 * 16)
-
-#define FLD_MASK(pos, len)	(((1 << len) - 1) << pos)
-
-#define MOD_REG_FLD(reg, mask, val) \
-	dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val));
-
-#define OMAP2_SRAM_START		0x40200000
-/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
-
-/* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */
-#define DISPC_MEMTYPE_NUM		2
-
-#define RESMAP_SIZE(_page_cnt)						\
-	((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
-#define RESMAP_PTR(_res_map, _page_nr)					\
-	(((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
-#define RESMAP_MASK(_page_nr)						\
-	(1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
-
-struct resmap {
-	unsigned long	start;
-	unsigned	page_cnt;
-	unsigned long	*map;
-};
-
-#define MAX_IRQ_HANDLERS            4
-
-static struct {
-	void __iomem	*base;
-
-	struct omapfb_mem_desc	mem_desc;
-	struct resmap		*res_map[DISPC_MEMTYPE_NUM];
-	atomic_t		map_count[OMAPFB_PLANE_NUM];
-
-	dma_addr_t	palette_paddr;
-	void		*palette_vaddr;
-
-	int		ext_mode;
-
-	struct {
-		u32	irq_mask;
-		void	(*callback)(void *);
-		void	*data;
-	} irq_handlers[MAX_IRQ_HANDLERS];
-	struct completion	frame_done;
-
-	int		fir_hinc[OMAPFB_PLANE_NUM];
-	int		fir_vinc[OMAPFB_PLANE_NUM];
-
-	struct clk	*dss_ick, *dss1_fck;
-	struct clk	*dss_54m_fck;
-
-	enum omapfb_update_mode	update_mode;
-	struct omapfb_device	*fbdev;
-
-	struct omapfb_color_key	color_key;
-} dispc;
-
-static void enable_lcd_clocks(int enable);
-
-static void inline dispc_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, dispc.base + idx);
-}
-
-static u32 inline dispc_read_reg(int idx)
-{
-	u32 l = __raw_readl(dispc.base + idx);
-	return l;
-}
-
-/* Select RFBI or bypass mode */
-static void enable_rfbi_mode(int enable)
-{
-	void __iomem *rfbi_control;
-	u32 l;
-
-	l = dispc_read_reg(DISPC_CONTROL);
-	/* Enable RFBI, GPIO0/1 */
-	l &= ~((1 << 11) | (1 << 15) | (1 << 16));
-	l |= enable ? (1 << 11) : 0;
-	/* RFBI En: GPIO0/1=10  RFBI Dis: GPIO0/1=11 */
-	l |= 1 << 15;
-	l |= enable ? 0 : (1 << 16);
-	dispc_write_reg(DISPC_CONTROL, l);
-
-	/* Set bypass mode in RFBI module */
-	rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
-	if (!rfbi_control) {
-		pr_err("Unable to ioremap rfbi_control\n");
-		return;
-	}
-	l = __raw_readl(rfbi_control);
-	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, rfbi_control);
-	iounmap(rfbi_control);
-}
-
-static void set_lcd_data_lines(int data_lines)
-{
-	u32 l;
-	int code = 0;
-
-	switch (data_lines) {
-	case 12:
-		code = 0;
-		break;
-	case 16:
-		code = 1;
-		break;
-	case 18:
-		code = 2;
-		break;
-	case 24:
-		code = 3;
-		break;
-	default:
-		BUG();
-	}
-
-	l = dispc_read_reg(DISPC_CONTROL);
-	l &= ~(0x03 << 8);
-	l |= code << 8;
-	dispc_write_reg(DISPC_CONTROL, l);
-}
-
-static void set_load_mode(int mode)
-{
-	BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY |
-			DISPC_LOAD_CLUT_ONCE_FRAME));
-	MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1);
-}
-
-void omap_dispc_set_lcd_size(int x, int y)
-{
-	BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((y - 1) << 16) | (x - 1));
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_lcd_size);
-
-void omap_dispc_set_digit_size(int x, int y)
-{
-	BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((y - 1) << 16) | (x - 1));
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_digit_size);
-
-static void setup_plane_fifo(int plane, int ext_mode)
-{
-	const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
-				DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD,
-			        DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD };
-	const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
-				DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS,
-				DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS };
-	int low, high;
-	u32 l;
-
-	BUG_ON(plane > 2);
-
-	l = dispc_read_reg(fsz_reg[plane]);
-	l &= FLD_MASK(0, 11);
-	if (ext_mode) {
-		low = l * 3 / 4;
-		high = l;
-	} else {
-		low = l / 4;
-		high = l * 3 / 4;
-	}
-	MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12),
-			(high << 16) | low);
-}
-
-void omap_dispc_enable_lcd_out(int enable)
-{
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0);
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_lcd_out);
-
-void omap_dispc_enable_digit_out(int enable)
-{
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0);
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_digit_out);
-
-static inline int _setup_plane(int plane, int channel_out,
-				  u32 paddr, int screen_width,
-				  int pos_x, int pos_y, int width, int height,
-				  int color_mode)
-{
-	const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
-				DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-			        DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0,
-				DISPC_VID2_BASE + DISPC_VID_BA0 };
-	const u32 ps_reg[] = { DISPC_GFX_POSITION,
-				DISPC_VID1_BASE + DISPC_VID_POSITION,
-				DISPC_VID2_BASE + DISPC_VID_POSITION };
-	const u32 sz_reg[] = { DISPC_GFX_SIZE,
-				DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE };
-	const u32 ri_reg[] = { DISPC_GFX_ROW_INC,
-				DISPC_VID1_BASE + DISPC_VID_ROW_INC,
-			        DISPC_VID2_BASE + DISPC_VID_ROW_INC };
-	const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_SIZE };
-
-	int chout_shift, burst_shift;
-	int chout_val;
-	int color_code;
-	int bpp;
-	int cconv_en;
-	int set_vsize;
-	u32 l;
-
-#ifdef VERBOSE
-	dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d"
-		    " pos_x %d pos_y %d width %d height %d color_mode %d\n",
-		    plane, channel_out, paddr, screen_width, pos_x, pos_y,
-		    width, height, color_mode);
-#endif
-
-	set_vsize = 0;
-	switch (plane) {
-	case OMAPFB_PLANE_GFX:
-		burst_shift = 6;
-		chout_shift = 8;
-		break;
-	case OMAPFB_PLANE_VID1:
-	case OMAPFB_PLANE_VID2:
-		burst_shift = 14;
-		chout_shift = 16;
-		set_vsize = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (channel_out) {
-	case OMAPFB_CHANNEL_OUT_LCD:
-		chout_val = 0;
-		break;
-	case OMAPFB_CHANNEL_OUT_DIGIT:
-		chout_val = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	cconv_en = 0;
-	switch (color_mode) {
-	case OMAPFB_COLOR_RGB565:
-		color_code = DISPC_RGB_16_BPP;
-		bpp = 16;
-		break;
-	case OMAPFB_COLOR_YUV422:
-		if (plane == 0)
-			return -EINVAL;
-		color_code = DISPC_UYVY_422;
-		cconv_en = 1;
-		bpp = 16;
-		break;
-	case OMAPFB_COLOR_YUY422:
-		if (plane == 0)
-			return -EINVAL;
-		color_code = DISPC_YUV2_422;
-		cconv_en = 1;
-		bpp = 16;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	l = dispc_read_reg(at_reg[plane]);
-
-	l &= ~(0x0f << 1);
-	l |= color_code << 1;
-	l &= ~(1 << 9);
-	l |= cconv_en << 9;
-
-	l &= ~(0x03 << burst_shift);
-	l |= DISPC_BURST_8x32 << burst_shift;
-
-	l &= ~(1 << chout_shift);
-	l |= chout_val << chout_shift;
-
-	dispc_write_reg(at_reg[plane], l);
-
-	dispc_write_reg(ba_reg[plane], paddr);
-	MOD_REG_FLD(ps_reg[plane],
-		    FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x);
-
-	MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((height - 1) << 16) | (width - 1));
-
-	if (set_vsize) {
-		/* Set video size if set_scale hasn't set it */
-		if (!dispc.fir_vinc[plane])
-			MOD_REG_FLD(vs_reg[plane],
-				FLD_MASK(16, 11), (height - 1) << 16);
-		if (!dispc.fir_hinc[plane])
-			MOD_REG_FLD(vs_reg[plane],
-				FLD_MASK(0, 11), width - 1);
-	}
-
-	dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
-
-	return height * screen_width * bpp / 8;
-}
-
-static int omap_dispc_setup_plane(int plane, int channel_out,
-				  unsigned long offset,
-				  int screen_width,
-				  int pos_x, int pos_y, int width, int height,
-				  int color_mode)
-{
-	u32 paddr;
-	int r;
-
-	if ((unsigned)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-	paddr = dispc.mem_desc.region[plane].paddr + offset;
-	enable_lcd_clocks(1);
-	r = _setup_plane(plane, channel_out, paddr,
-			screen_width,
-			pos_x, pos_y, width, height, color_mode);
-	enable_lcd_clocks(0);
-	return r;
-}
-
-static void write_firh_reg(int plane, int reg, u32 value)
-{
-	u32 base;
-
-	if (plane == 1)
-		base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0;
-	else
-		base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0;
-	dispc_write_reg(base + reg * 8,	value);
-}
-
-static void write_firhv_reg(int plane, int reg, u32 value)
-{
-	u32 base;
-
-	if (plane == 1)
-		base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0;
-	else
-		base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0;
-	dispc_write_reg(base + reg * 8,	value);
-}
-
-static void set_upsampling_coef_table(int plane)
-{
-	const u32 coef[][2] = {
-		{ 0x00800000, 0x00800000 },
-		{ 0x0D7CF800, 0x037B02FF },
-		{ 0x1E70F5FF, 0x0C6F05FE },
-		{ 0x335FF5FE, 0x205907FB },
-		{ 0xF74949F7, 0x00404000 },
-		{ 0xF55F33FB, 0x075920FE },
-		{ 0xF5701EFE, 0x056F0CFF },
-		{ 0xF87C0DFF, 0x027B0300 },
-	};
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		write_firh_reg(plane, i, coef[i][0]);
-		write_firhv_reg(plane, i, coef[i][1]);
-	}
-}
-
-static int omap_dispc_set_scale(int plane,
-				int orig_width, int orig_height,
-				int out_width, int out_height)
-{
-	const u32 at_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-				DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	const u32 vs_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_SIZE };
-	const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR,
-				DISPC_VID2_BASE + DISPC_VID_FIR };
-
-	u32 l;
-	int fir_hinc;
-	int fir_vinc;
-
-	if ((unsigned)plane > OMAPFB_PLANE_NUM)
-		return -ENODEV;
-
-	if (plane == OMAPFB_PLANE_GFX &&
-	    (out_width != orig_width || out_height != orig_height))
-		return -EINVAL;
-
-	enable_lcd_clocks(1);
-	if (orig_width < out_width) {
-		/*
-		 * Upsampling.
-		 * Currently you can only scale both dimensions in one way.
-		 */
-		if (orig_height > out_height ||
-		    orig_width * 8 < out_width ||
-		    orig_height * 8 < out_height) {
-			enable_lcd_clocks(0);
-			return -EINVAL;
-		}
-		set_upsampling_coef_table(plane);
-	} else if (orig_width > out_width) {
-		/* Downsampling not yet supported
-		*/
-
-		enable_lcd_clocks(0);
-		return -EINVAL;
-	}
-	if (!orig_width || orig_width == out_width)
-		fir_hinc = 0;
-	else
-		fir_hinc = 1024 * orig_width / out_width;
-	if (!orig_height || orig_height == out_height)
-		fir_vinc = 0;
-	else
-		fir_vinc = 1024 * orig_height / out_height;
-	dispc.fir_hinc[plane] = fir_hinc;
-	dispc.fir_vinc[plane] = fir_vinc;
-
-	MOD_REG_FLD(fir_reg[plane],
-		    FLD_MASK(16, 12) | FLD_MASK(0, 12),
-		    ((fir_vinc & 4095) << 16) |
-		    (fir_hinc & 4095));
-
-	dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
-		"orig_height %d fir_hinc  %d fir_vinc %d\n",
-		out_width, out_height, orig_width, orig_height,
-		fir_hinc, fir_vinc);
-
-	MOD_REG_FLD(vs_reg[plane],
-		    FLD_MASK(16, 11) | FLD_MASK(0, 11),
-		    ((out_height - 1) << 16) | (out_width - 1));
-
-	l = dispc_read_reg(at_reg[plane]);
-	l &= ~(0x03 << 5);
-	l |= fir_hinc ? (1 << 5) : 0;
-	l |= fir_vinc ? (1 << 6) : 0;
-	dispc_write_reg(at_reg[plane], l);
-
-	enable_lcd_clocks(0);
-	return 0;
-}
-
-static int omap_dispc_enable_plane(int plane, int enable)
-{
-	const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
-				DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-				DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	if ((unsigned int)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
-	enable_lcd_clocks(0);
-
-	return 0;
-}
-
-static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
-{
-	u32 df_reg, tr_reg;
-	int shift, val;
-
-	switch (ck->channel_out) {
-	case OMAPFB_CHANNEL_OUT_LCD:
-		df_reg = DISPC_DEFAULT_COLOR0;
-		tr_reg = DISPC_TRANS_COLOR0;
-		shift = 10;
-		break;
-	case OMAPFB_CHANNEL_OUT_DIGIT:
-		df_reg = DISPC_DEFAULT_COLOR1;
-		tr_reg = DISPC_TRANS_COLOR1;
-		shift = 12;
-		break;
-	default:
-		return -EINVAL;
-	}
-	switch (ck->key_type) {
-	case OMAPFB_COLOR_KEY_DISABLED:
-		val = 0;
-		break;
-	case OMAPFB_COLOR_KEY_GFX_DST:
-		val = 1;
-		break;
-	case OMAPFB_COLOR_KEY_VID_SRC:
-		val = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift);
-
-	if (val != 0)
-		dispc_write_reg(tr_reg, ck->trans_key);
-	dispc_write_reg(df_reg, ck->background);
-	enable_lcd_clocks(0);
-
-	dispc.color_key = *ck;
-
-	return 0;
-}
-
-static int omap_dispc_get_color_key(struct omapfb_color_key *ck)
-{
-	*ck = dispc.color_key;
-	return 0;
-}
-
-static void load_palette(void)
-{
-}
-
-static int omap_dispc_set_update_mode(enum omapfb_update_mode mode)
-{
-	int r = 0;
-
-	if (mode != dispc.update_mode) {
-		switch (mode) {
-		case OMAPFB_AUTO_UPDATE:
-		case OMAPFB_MANUAL_UPDATE:
-			enable_lcd_clocks(1);
-			omap_dispc_enable_lcd_out(1);
-			dispc.update_mode = mode;
-			break;
-		case OMAPFB_UPDATE_DISABLED:
-			init_completion(&dispc.frame_done);
-			omap_dispc_enable_lcd_out(0);
-			if (!wait_for_completion_timeout(&dispc.frame_done,
-					msecs_to_jiffies(500))) {
-				dev_err(dispc.fbdev->dev,
-					 "timeout waiting for FRAME DONE\n");
-			}
-			dispc.update_mode = mode;
-			enable_lcd_clocks(0);
-			break;
-		default:
-			r = -EINVAL;
-		}
-	}
-
-	return r;
-}
-
-static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps)
-{
-	caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM;
-	if (plane > 0)
-		caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE;
-	caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) |
-			     (1 << OMAPFB_COLOR_YUV422) |
-			     (1 << OMAPFB_COLOR_YUY422);
-	if (plane == 0)
-		caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_4BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_2BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_1BPP) |
-				     (1 << OMAPFB_COLOR_RGB444);
-}
-
-static enum omapfb_update_mode omap_dispc_get_update_mode(void)
-{
-	return dispc.update_mode;
-}
-
-static void setup_color_conv_coef(void)
-{
-	u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11);
-	int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0;
-	int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0;
-	int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES;
-	int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES;
-	const struct color_conv_coef {
-		int  ry,  rcr,  rcb,   gy,  gcr,  gcb,   by,  bcr,  bcb;
-		int  full_range;
-	}  ctbl_bt601_5 = {
-		    298,  409,    0,  298, -208, -100,  298,    0,  517, 0,
-	};
-	const struct color_conv_coef *ct;
-#define CVAL(x, y)	(((x & 2047) << 16) | (y & 2047))
-
-	ct = &ctbl_bt601_5;
-
-	MOD_REG_FLD(cf1_reg,		mask,	CVAL(ct->rcr, ct->ry));
-	MOD_REG_FLD(cf1_reg + 4,	mask,	CVAL(ct->gy,  ct->rcb));
-	MOD_REG_FLD(cf1_reg + 8,	mask,	CVAL(ct->gcb, ct->gcr));
-	MOD_REG_FLD(cf1_reg + 12,	mask,	CVAL(ct->bcr, ct->by));
-	MOD_REG_FLD(cf1_reg + 16,	mask,	CVAL(0,	      ct->bcb));
-
-	MOD_REG_FLD(cf2_reg,		mask,	CVAL(ct->rcr, ct->ry));
-	MOD_REG_FLD(cf2_reg + 4,	mask,	CVAL(ct->gy,  ct->rcb));
-	MOD_REG_FLD(cf2_reg + 8,	mask,	CVAL(ct->gcb, ct->gcr));
-	MOD_REG_FLD(cf2_reg + 12,	mask,	CVAL(ct->bcr, ct->by));
-	MOD_REG_FLD(cf2_reg + 16,	mask,	CVAL(0,	      ct->bcb));
-#undef CVAL
-
-	MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range);
-	MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
-}
-
-static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
-{
-	unsigned long fck, lck;
-
-	*lck_div = 1;
-	pck = max(1, pck);
-	fck = clk_get_rate(dispc.dss1_fck);
-	lck = fck;
-	*pck_div = (lck + pck - 1) / pck;
-	if (is_tft)
-		*pck_div = max(2, *pck_div);
-	else
-		*pck_div = max(3, *pck_div);
-	if (*pck_div > 255) {
-		*pck_div = 255;
-		lck = pck * *pck_div;
-		*lck_div = fck / lck;
-		BUG_ON(*lck_div < 1);
-		if (*lck_div > 255) {
-			*lck_div = 255;
-			dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n",
-				 pck / 1000);
-		}
-	}
-}
-
-static void set_lcd_tft_mode(int enable)
-{
-	u32 mask;
-
-	mask = 1 << 3;
-	MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0);
-}
-
-static void set_lcd_timings(void)
-{
-	u32 l;
-	int lck_div, pck_div;
-	struct lcd_panel *panel = dispc.fbdev->panel;
-	int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
-	unsigned long fck;
-
-	l = dispc_read_reg(DISPC_TIMING_H);
-	l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
-	l |= ( max(1, (min(64,  panel->hsw))) - 1 ) << 0;
-	l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8;
-	l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20;
-	dispc_write_reg(DISPC_TIMING_H, l);
-
-	l = dispc_read_reg(DISPC_TIMING_V);
-	l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
-	l |= ( max(1, (min(64,  panel->vsw))) - 1 ) << 0;
-	l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8;
-	l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20;
-	dispc_write_reg(DISPC_TIMING_V, l);
-
-	l = dispc_read_reg(DISPC_POL_FREQ);
-	l &= ~FLD_MASK(12, 6);
-	l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12;
-	l |= panel->acb & 0xff;
-	dispc_write_reg(DISPC_POL_FREQ, l);
-
-	calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
-
-	l = dispc_read_reg(DISPC_DIVISOR);
-	l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
-	l |= (lck_div << 16) | (pck_div << 0);
-	dispc_write_reg(DISPC_DIVISOR, l);
-
-	/* update panel info with the exact clock */
-	fck = clk_get_rate(dispc.dss1_fck);
-	panel->pixel_clock = fck / lck_div / pck_div / 1000;
-}
-
-static void recalc_irq_mask(void)
-{
-	int i;
-	unsigned long irq_mask = DISPC_IRQ_MASK_ERROR;
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (!dispc.irq_handlers[i].callback)
-			continue;
-
-		irq_mask |= dispc.irq_handlers[i].irq_mask;
-	}
-
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
-	enable_lcd_clocks(0);
-}
-
-int omap_dispc_request_irq(unsigned long irq_mask, void (*callback)(void *data),
-			   void *data)
-{
-	int i;
-
-	BUG_ON(callback == NULL);
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (dispc.irq_handlers[i].callback)
-			continue;
-
-		dispc.irq_handlers[i].irq_mask = irq_mask;
-		dispc.irq_handlers[i].callback = callback;
-		dispc.irq_handlers[i].data = data;
-		recalc_irq_mask();
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-EXPORT_SYMBOL(omap_dispc_request_irq);
-
-void omap_dispc_free_irq(unsigned long irq_mask, void (*callback)(void *data),
-			 void *data)
-{
-	int i;
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (dispc.irq_handlers[i].callback == callback &&
-		    dispc.irq_handlers[i].data == data) {
-			dispc.irq_handlers[i].irq_mask = 0;
-			dispc.irq_handlers[i].callback = NULL;
-			dispc.irq_handlers[i].data = NULL;
-			recalc_irq_mask();
-			return;
-		}
-	}
-
-	BUG();
-}
-EXPORT_SYMBOL(omap_dispc_free_irq);
-
-static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
-{
-	u32 stat;
-	int i = 0;
-
-	enable_lcd_clocks(1);
-
-	stat = dispc_read_reg(DISPC_IRQSTATUS);
-	if (stat & DISPC_IRQ_FRAMEMASK)
-		complete(&dispc.frame_done);
-
-	if (stat & DISPC_IRQ_MASK_ERROR) {
-		if (printk_ratelimit()) {
-			dev_err(dispc.fbdev->dev, "irq error status %04x\n",
-				stat & 0x7fff);
-		}
-	}
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (unlikely(dispc.irq_handlers[i].callback &&
-			     (stat & dispc.irq_handlers[i].irq_mask)))
-			dispc.irq_handlers[i].callback(
-						dispc.irq_handlers[i].data);
-	}
-
-	dispc_write_reg(DISPC_IRQSTATUS, stat);
-
-	enable_lcd_clocks(0);
-
-	return IRQ_HANDLED;
-}
-
-static int get_dss_clocks(void)
-{
-	dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
-	if (IS_ERR(dispc.dss_ick)) {
-		dev_err(dispc.fbdev->dev, "can't get ick\n");
-		return PTR_ERR(dispc.dss_ick);
-	}
-
-	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
-	if (IS_ERR(dispc.dss1_fck)) {
-		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
-		clk_put(dispc.dss_ick);
-		return PTR_ERR(dispc.dss1_fck);
-	}
-
-	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
-	if (IS_ERR(dispc.dss_54m_fck)) {
-		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
-		clk_put(dispc.dss_ick);
-		clk_put(dispc.dss1_fck);
-		return PTR_ERR(dispc.dss_54m_fck);
-	}
-
-	return 0;
-}
-
-static void put_dss_clocks(void)
-{
-	clk_put(dispc.dss_54m_fck);
-	clk_put(dispc.dss1_fck);
-	clk_put(dispc.dss_ick);
-}
-
-static void enable_lcd_clocks(int enable)
-{
-	if (enable) {
-		clk_enable(dispc.dss_ick);
-		clk_enable(dispc.dss1_fck);
-	} else {
-		clk_disable(dispc.dss1_fck);
-		clk_disable(dispc.dss_ick);
-	}
-}
-
-static void enable_digit_clocks(int enable)
-{
-	if (enable)
-		clk_enable(dispc.dss_54m_fck);
-	else
-		clk_disable(dispc.dss_54m_fck);
-}
-
-static void omap_dispc_suspend(void)
-{
-	if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
-		init_completion(&dispc.frame_done);
-		omap_dispc_enable_lcd_out(0);
-		if (!wait_for_completion_timeout(&dispc.frame_done,
-				msecs_to_jiffies(500))) {
-			dev_err(dispc.fbdev->dev,
-				"timeout waiting for FRAME DONE\n");
-		}
-		enable_lcd_clocks(0);
-	}
-}
-
-static void omap_dispc_resume(void)
-{
-	if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
-		enable_lcd_clocks(1);
-		if (!dispc.ext_mode) {
-			set_lcd_timings();
-			load_palette();
-		}
-		omap_dispc_enable_lcd_out(1);
-	}
-}
-
-
-static int omap_dispc_update_window(struct fb_info *fbi,
-				 struct omapfb_update_window *win,
-				 void (*complete_callback)(void *arg),
-				 void *complete_callback_data)
-{
-	return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0;
-}
-
-static int mmap_kern(struct omapfb_mem_region *region)
-{
-	struct vm_struct	*kvma;
-	struct vm_area_struct	vma;
-	pgprot_t		pgprot;
-	unsigned long		vaddr;
-
-	kvma = get_vm_area(region->size, VM_IOREMAP);
-	if (kvma == NULL) {
-		dev_err(dispc.fbdev->dev, "can't get kernel vm area\n");
-		return -ENOMEM;
-	}
-	vma.vm_mm = &init_mm;
-
-	vaddr = (unsigned long)kvma->addr;
-
-	pgprot = pgprot_writecombine(pgprot_kernel);
-	vma.vm_start = vaddr;
-	vma.vm_end = vaddr + region->size;
-	if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT,
-			   region->size, pgprot) < 0) {
-		dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n");
-		return -EAGAIN;
-	}
-	region->vaddr = (void *)vaddr;
-
-	return 0;
-}
-
-static void mmap_user_open(struct vm_area_struct *vma)
-{
-	int plane = (int)vma->vm_private_data;
-
-	atomic_inc(&dispc.map_count[plane]);
-}
-
-static void mmap_user_close(struct vm_area_struct *vma)
-{
-	int plane = (int)vma->vm_private_data;
-
-	atomic_dec(&dispc.map_count[plane]);
-}
-
-static const struct vm_operations_struct mmap_user_ops = {
-	.open = mmap_user_open,
-	.close = mmap_user_close,
-};
-
-static int omap_dispc_mmap_user(struct fb_info *info,
-				struct vm_area_struct *vma)
-{
-	struct omapfb_plane_struct *plane = info->par;
-	unsigned long off;
-	unsigned long start;
-	u32 len;
-
-	if (vma->vm_end - vma->vm_start == 0)
-		return 0;
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	start = info->fix.smem_start;
-	len = info->fix.smem_len;
-	if (off >= len)
-		return -EINVAL;
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	vma->vm_flags |= VM_IO | VM_RESERVED;
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	vma->vm_ops = &mmap_user_ops;
-	vma->vm_private_data = (void *)plane->idx;
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-		return -EAGAIN;
-	/* vm_ops.open won't be called for mmap itself. */
-	atomic_inc(&dispc.map_count[plane->idx]);
-	return 0;
-}
-
-static void unmap_kern(struct omapfb_mem_region *region)
-{
-	vunmap(region->vaddr);
-}
-
-static int alloc_palette_ram(void)
-{
-	dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
-		MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL);
-	if (dispc.palette_vaddr == NULL) {
-		dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void free_palette_ram(void)
-{
-	dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE,
-			dispc.palette_vaddr, dispc.palette_paddr);
-}
-
-static int alloc_fbmem(struct omapfb_mem_region *region)
-{
-	region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
-			region->size, &region->paddr, GFP_KERNEL);
-
-	if (region->vaddr == NULL) {
-		dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void free_fbmem(struct omapfb_mem_region *region)
-{
-	dma_free_writecombine(dispc.fbdev->dev, region->size,
-			      region->vaddr, region->paddr);
-}
-
-static struct resmap *init_resmap(unsigned long start, size_t size)
-{
-	unsigned page_cnt;
-	struct resmap *res_map;
-
-	page_cnt = PAGE_ALIGN(size) / PAGE_SIZE;
-	res_map =
-	    kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL);
-	if (res_map == NULL)
-		return NULL;
-	res_map->start = start;
-	res_map->page_cnt = page_cnt;
-	res_map->map = (unsigned long *)(res_map + 1);
-	return res_map;
-}
-
-static void cleanup_resmap(struct resmap *res_map)
-{
-	kfree(res_map);
-}
-
-static inline int resmap_mem_type(unsigned long start)
-{
-	if (start >= OMAP2_SRAM_START &&
-	    start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
-		return OMAPFB_MEMTYPE_SRAM;
-	else
-		return OMAPFB_MEMTYPE_SDRAM;
-}
-
-static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr)
-{
-	return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0;
-}
-
-static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr)
-{
-	BUG_ON(resmap_page_reserved(res_map, page_nr));
-	*RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr);
-}
-
-static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr)
-{
-	BUG_ON(!resmap_page_reserved(res_map, page_nr));
-	*RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr);
-}
-
-static void resmap_reserve_region(unsigned long start, size_t size)
-{
-
-	struct resmap	*res_map;
-	unsigned	start_page;
-	unsigned	end_page;
-	int		mtype;
-	unsigned	i;
-
-	mtype = resmap_mem_type(start);
-	res_map = dispc.res_map[mtype];
-	dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n",
-		mtype, start, size);
-	start_page = (start - res_map->start) / PAGE_SIZE;
-	end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
-	for (i = start_page; i < end_page; i++)
-		resmap_reserve_page(res_map, i);
-}
-
-static void resmap_free_region(unsigned long start, size_t size)
-{
-	struct resmap	*res_map;
-	unsigned	start_page;
-	unsigned	end_page;
-	unsigned	i;
-	int		mtype;
-
-	mtype = resmap_mem_type(start);
-	res_map = dispc.res_map[mtype];
-	dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n",
-		mtype, start, size);
-	start_page = (start - res_map->start) / PAGE_SIZE;
-	end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
-	for (i = start_page; i < end_page; i++)
-		resmap_free_page(res_map, i);
-}
-
-static unsigned long resmap_alloc_region(int mtype, size_t size)
-{
-	unsigned i;
-	unsigned total;
-	unsigned start_page;
-	unsigned long start;
-	struct resmap *res_map = dispc.res_map[mtype];
-
-	BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size);
-
-	size = PAGE_ALIGN(size) / PAGE_SIZE;
-	start_page = 0;
-	total = 0;
-	for (i = 0; i < res_map->page_cnt; i++) {
-		if (resmap_page_reserved(res_map, i)) {
-			start_page = i + 1;
-			total = 0;
-		} else if (++total == size)
-			break;
-	}
-	if (total < size)
-		return 0;
-
-	start = res_map->start + start_page * PAGE_SIZE;
-	resmap_reserve_region(start, size * PAGE_SIZE);
-
-	return start;
-}
-
-/* Note that this will only work for user mappings, we don't deal with
- * kernel mappings here, so fbcon will keep using the old region.
- */
-static int omap_dispc_setup_mem(int plane, size_t size, int mem_type,
-				unsigned long *paddr)
-{
-	struct omapfb_mem_region *rg;
-	unsigned long new_addr = 0;
-
-	if ((unsigned)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-	if (mem_type >= DISPC_MEMTYPE_NUM)
-		return -EINVAL;
-	if (dispc.res_map[mem_type] == NULL)
-		return -ENOMEM;
-	rg = &dispc.mem_desc.region[plane];
-	if (size == rg->size && mem_type == rg->type)
-		return 0;
-	if (atomic_read(&dispc.map_count[plane]))
-		return -EBUSY;
-	if (rg->size != 0)
-		resmap_free_region(rg->paddr, rg->size);
-	if (size != 0) {
-		new_addr = resmap_alloc_region(mem_type, size);
-		if (!new_addr) {
-			/* Reallocate old region. */
-			resmap_reserve_region(rg->paddr, rg->size);
-			return -ENOMEM;
-		}
-	}
-	rg->paddr = new_addr;
-	rg->size = size;
-	rg->type = mem_type;
-
-	*paddr = new_addr;
-
-	return 0;
-}
-
-static int setup_fbmem(struct omapfb_mem_desc *req_md)
-{
-	struct omapfb_mem_region	*rg;
-	int i;
-	int r;
-	unsigned long			mem_start[DISPC_MEMTYPE_NUM];
-	unsigned long			mem_end[DISPC_MEMTYPE_NUM];
-
-	if (!req_md->region_cnt) {
-		dev_err(dispc.fbdev->dev, "no memory regions defined\n");
-		return -ENOENT;
-	}
-
-	rg = &req_md->region[0];
-	memset(mem_start, 0xff, sizeof(mem_start));
-	memset(mem_end, 0, sizeof(mem_end));
-
-	for (i = 0; i < req_md->region_cnt; i++, rg++) {
-		int mtype;
-		if (rg->paddr) {
-			rg->alloc = 0;
-			if (rg->vaddr == NULL) {
-				rg->map = 1;
-				if ((r = mmap_kern(rg)) < 0)
-					return r;
-			}
-		} else {
-			if (rg->type != OMAPFB_MEMTYPE_SDRAM) {
-				dev_err(dispc.fbdev->dev,
-					"unsupported memory type\n");
-				return -EINVAL;
-			}
-			rg->alloc = rg->map = 1;
-			if ((r = alloc_fbmem(rg)) < 0)
-				return r;
-		}
-		mtype = rg->type;
-
-		if (rg->paddr < mem_start[mtype])
-			mem_start[mtype] = rg->paddr;
-		if (rg->paddr + rg->size > mem_end[mtype])
-			mem_end[mtype] = rg->paddr + rg->size;
-	}
-
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		unsigned long start;
-		size_t size;
-		if (mem_end[i] == 0)
-			continue;
-		start = mem_start[i];
-		size = mem_end[i] - start;
-		dispc.res_map[i] = init_resmap(start, size);
-		r = -ENOMEM;
-		if (dispc.res_map[i] == NULL)
-			goto fail;
-		/* Initial state is that everything is reserved. This
-		 * includes possible holes as well, which will never be
-		 * freed.
-		 */
-		resmap_reserve_region(start, size);
-	}
-
-	dispc.mem_desc = *req_md;
-
-	return 0;
-fail:
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		if (dispc.res_map[i] != NULL)
-			cleanup_resmap(dispc.res_map[i]);
-	}
-	return r;
-}
-
-static void cleanup_fbmem(void)
-{
-	struct omapfb_mem_region *rg;
-	int i;
-
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		if (dispc.res_map[i] != NULL)
-			cleanup_resmap(dispc.res_map[i]);
-	}
-	rg = &dispc.mem_desc.region[0];
-	for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) {
-		if (rg->alloc)
-			free_fbmem(rg);
-		else {
-			if (rg->map)
-				unmap_kern(rg);
-		}
-	}
-}
-
-static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
-			   struct omapfb_mem_desc *req_vram)
-{
-	int r;
-	u32 l;
-	struct lcd_panel *panel = fbdev->panel;
-	void __iomem *ram_fw_base;
-	int tmo = 10000;
-	int skip_init = 0;
-	int i;
-
-	memset(&dispc, 0, sizeof(dispc));
-
-	dispc.base = ioremap(DISPC_BASE, SZ_1K);
-	if (!dispc.base) {
-		dev_err(fbdev->dev, "can't ioremap DISPC\n");
-		return -ENOMEM;
-	}
-
-	dispc.fbdev = fbdev;
-	dispc.ext_mode = ext_mode;
-
-	init_completion(&dispc.frame_done);
-
-	if ((r = get_dss_clocks()) < 0)
-		goto fail0;
-
-	enable_lcd_clocks(1);
-
-#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
-	l = dispc_read_reg(DISPC_CONTROL);
-	/* LCD enabled ? */
-	if (l & 1) {
-		pr_info("omapfb: skipping hardware initialization\n");
-		skip_init = 1;
-	}
-#endif
-
-	if (!skip_init) {
-		/* Reset monitoring works only w/ the 54M clk */
-		enable_digit_clocks(1);
-
-		/* Soft reset */
-		MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1);
-
-		while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) {
-			if (!--tmo) {
-				dev_err(dispc.fbdev->dev, "soft reset failed\n");
-				r = -ENODEV;
-				enable_digit_clocks(0);
-				goto fail1;
-			}
-		}
-
-		enable_digit_clocks(0);
-	}
-
-	/* Enable smart standby/idle, autoidle and wakeup */
-	l = dispc_read_reg(DISPC_SYSCONFIG);
-	l &= ~((3 << 12) | (3 << 3));
-	l |= (2 << 12) | (2 << 3) | (1 << 2) | (1 << 0);
-	dispc_write_reg(DISPC_SYSCONFIG, l);
-	omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG);
-
-	/* Set functional clock autogating */
-	l = dispc_read_reg(DISPC_CONFIG);
-	l |= 1 << 9;
-	dispc_write_reg(DISPC_CONFIG, l);
-
-	l = dispc_read_reg(DISPC_IRQSTATUS);
-	dispc_write_reg(DISPC_IRQSTATUS, l);
-
-	recalc_irq_mask();
-
-	if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler,
-			   0, MODULE_NAME, fbdev)) < 0) {
-		dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n");
-		goto fail1;
-	}
-
-	/* L3 firewall setting: enable access to OCM RAM */
-	ram_fw_base = ioremap(0x68005000, SZ_1K);
-	if (!ram_fw_base) {
-		dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
-		goto fail1;
-	}
-	__raw_writel(0x402000b0, ram_fw_base + 0xa0);
-	iounmap(ram_fw_base);
-
-	if ((r = alloc_palette_ram()) < 0)
-		goto fail2;
-
-	if ((r = setup_fbmem(req_vram)) < 0)
-		goto fail3;
-
-	if (!skip_init) {
-		for (i = 0; i < dispc.mem_desc.region_cnt; i++) {
-			memset(dispc.mem_desc.region[i].vaddr, 0,
-				dispc.mem_desc.region[i].size);
-		}
-
-		/* Set logic clock to fck, pixel clock to fck/2 for now */
-		MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16);
-		MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0);
-
-		setup_plane_fifo(0, ext_mode);
-		setup_plane_fifo(1, ext_mode);
-		setup_plane_fifo(2, ext_mode);
-
-		setup_color_conv_coef();
-
-		set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT);
-		set_load_mode(DISPC_LOAD_FRAME_ONLY);
-
-		if (!ext_mode) {
-			set_lcd_data_lines(panel->data_lines);
-			omap_dispc_set_lcd_size(panel->x_res, panel->y_res);
-			set_lcd_timings();
-		} else
-			set_lcd_data_lines(panel->bpp);
-		enable_rfbi_mode(ext_mode);
-	}
-
-	l = dispc_read_reg(DISPC_REVISION);
-	pr_info("omapfb: DISPC version %d.%d initialized\n",
-		 l >> 4 & 0x0f, l & 0x0f);
-	enable_lcd_clocks(0);
-
-	return 0;
-fail3:
-	free_palette_ram();
-fail2:
-	free_irq(INT_24XX_DSS_IRQ, fbdev);
-fail1:
-	enable_lcd_clocks(0);
-	put_dss_clocks();
-fail0:
-	iounmap(dispc.base);
-	return r;
-}
-
-static void omap_dispc_cleanup(void)
-{
-	int i;
-
-	omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED);
-	/* This will also disable clocks that are on */
-	for (i = 0; i < dispc.mem_desc.region_cnt; i++)
-		omap_dispc_enable_plane(i, 0);
-	cleanup_fbmem();
-	free_palette_ram();
-	free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
-	put_dss_clocks();
-	iounmap(dispc.base);
-}
-
-const struct lcd_ctrl omap2_int_ctrl = {
-	.name			= "internal",
-	.init			= omap_dispc_init,
-	.cleanup		= omap_dispc_cleanup,
-	.get_caps		= omap_dispc_get_caps,
-	.set_update_mode	= omap_dispc_set_update_mode,
-	.get_update_mode	= omap_dispc_get_update_mode,
-	.update_window		= omap_dispc_update_window,
-	.suspend		= omap_dispc_suspend,
-	.resume			= omap_dispc_resume,
-	.setup_plane		= omap_dispc_setup_plane,
-	.setup_mem		= omap_dispc_setup_mem,
-	.set_scale		= omap_dispc_set_scale,
-	.enable_plane		= omap_dispc_enable_plane,
-	.set_color_key		= omap_dispc_set_color_key,
-	.get_color_key		= omap_dispc_get_color_key,
-	.mmap			= omap_dispc_mmap_user,
-};
diff --git a/drivers/video/omap/dispc.h b/drivers/video/omap/dispc.h
deleted file mode 100644
index c15ea77f060..00000000000
--- a/drivers/video/omap/dispc.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _DISPC_H
-#define _DISPC_H
-
-#include <linux/interrupt.h>
-
-#define DISPC_PLANE_GFX			0
-#define DISPC_PLANE_VID1		1
-#define DISPC_PLANE_VID2		2
-
-#define DISPC_RGB_1_BPP			0x00
-#define DISPC_RGB_2_BPP			0x01
-#define DISPC_RGB_4_BPP			0x02
-#define DISPC_RGB_8_BPP			0x03
-#define DISPC_RGB_12_BPP		0x04
-#define DISPC_RGB_16_BPP		0x06
-#define DISPC_RGB_24_BPP		0x08
-#define DISPC_RGB_24_BPP_UNPACK_32	0x09
-#define DISPC_YUV2_422			0x0a
-#define DISPC_UYVY_422			0x0b
-
-#define DISPC_BURST_4x32		0
-#define DISPC_BURST_8x32		1
-#define DISPC_BURST_16x32		2
-
-#define DISPC_LOAD_CLUT_AND_FRAME	0x00
-#define DISPC_LOAD_CLUT_ONLY		0x01
-#define DISPC_LOAD_FRAME_ONLY		0x02
-#define DISPC_LOAD_CLUT_ONCE_FRAME	0x03
-
-#define DISPC_TFT_DATA_LINES_12		0
-#define DISPC_TFT_DATA_LINES_16		1
-#define DISPC_TFT_DATA_LINES_18		2
-#define DISPC_TFT_DATA_LINES_24		3
-
-extern void omap_dispc_set_lcd_size(int width, int height);
-
-extern void omap_dispc_enable_lcd_out(int enable);
-extern void omap_dispc_enable_digit_out(int enable);
-
-extern int omap_dispc_request_irq(unsigned long irq_mask,
-				   void (*callback)(void *data), void *data);
-extern void omap_dispc_free_irq(unsigned long irq_mask,
-				 void (*callback)(void *data), void *data);
-
-extern const struct lcd_ctrl omap2_int_ctrl;
-#endif
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index af3c9e571ec..3a5ab13845f 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -207,11 +207,7 @@ struct omapfb_device {
 	struct platform_device	*dssdev;	/* dummy dev for clocks */
 };
 
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
 
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 440a5dd0665..73924bc9959 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -34,7 +34,6 @@
 
 #include "omapfb.h"
 #include "lcdc.h"
-#include "dispc.h"
 
 #define MODULE_NAME	"omapfb"
 
@@ -106,11 +105,7 @@ static struct platform_device omapdss_device = {
 extern struct lcd_ctrl hwa742_ctrl;
 
 static const struct lcd_ctrl *ctrls[] = {
-#ifdef CONFIG_ARCH_OMAP1
 	&omap1_int_ctrl,
-#else
-	&omap2_int_ctrl,
-#endif
 
 #ifdef CONFIG_FB_OMAP_LCDC_HWA742
 	&hwa742_ctrl,
@@ -118,11 +113,7 @@ static const struct lcd_ctrl *ctrls[] = {
 };
 
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl_extif omap1_ext_if;
-#else
-extern struct lcd_ctrl_extif omap2_ext_if;
-#endif
 #endif
 
 static void omapfb_rqueue_lock(struct omapfb_device *fbdev)
@@ -1717,16 +1708,9 @@ static int omapfb_do_probe(struct platform_device *pdev,
 
 	mutex_init(&fbdev->rqueue_mutex);
 
-#ifdef CONFIG_ARCH_OMAP1
 	fbdev->int_ctrl = &omap1_int_ctrl;
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
 	fbdev->ext_if = &omap1_ext_if;
-#endif
-#else	/* OMAP2 */
-	fbdev->int_ctrl = &omap2_int_ctrl;
-#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-	fbdev->ext_if = &omap2_ext_if;
-#endif
 #endif
 	if (omapfb_find_ctrl(fbdev) < 0) {
 		dev_err(fbdev->dev,
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
deleted file mode 100644
index 2c1a3402bef..00000000000
--- a/drivers/video/omap/rfbi.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * OMAP2 Remote Frame Buffer Interface support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *	   Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-/* To work around an RFBI transfer rate limitation */
-#define OMAP_RFBI_RATE_LIMIT	1
-
-#define RFBI_BASE		0x48050800
-#define RFBI_REVISION		0x0000
-#define RFBI_SYSCONFIG		0x0010
-#define RFBI_SYSSTATUS		0x0014
-#define RFBI_CONTROL		0x0040
-#define RFBI_PIXEL_CNT		0x0044
-#define RFBI_LINE_NUMBER	0x0048
-#define RFBI_CMD		0x004c
-#define RFBI_PARAM		0x0050
-#define RFBI_DATA		0x0054
-#define RFBI_READ		0x0058
-#define RFBI_STATUS		0x005c
-#define RFBI_CONFIG0		0x0060
-#define RFBI_ONOFF_TIME0	0x0064
-#define RFBI_CYCLE_TIME0	0x0068
-#define RFBI_DATA_CYCLE1_0	0x006c
-#define RFBI_DATA_CYCLE2_0	0x0070
-#define RFBI_DATA_CYCLE3_0	0x0074
-#define RFBI_VSYNC_WIDTH	0x0090
-#define RFBI_HSYNC_WIDTH	0x0094
-
-#define DISPC_BASE		0x48050400
-#define DISPC_CONTROL		0x0040
-#define DISPC_IRQ_FRAMEMASK     0x0001
-
-static struct {
-	void __iomem	*base;
-	void		(*lcdc_callback)(void *data);
-	void		*lcdc_callback_data;
-	unsigned long	l4_khz;
-	int		bits_per_cycle;
-	struct omapfb_device *fbdev;
-	struct clk	*dss_ick;
-	struct clk	*dss1_fck;
-	unsigned	tearsync_pin_cnt;
-	unsigned	tearsync_mode;
-} rfbi;
-
-static inline void rfbi_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, rfbi.base + idx);
-}
-
-static inline u32 rfbi_read_reg(int idx)
-{
-	return __raw_readl(rfbi.base + idx);
-}
-
-static int rfbi_get_clocks(void)
-{
-	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
-	if (IS_ERR(rfbi.dss_ick)) {
-		dev_err(rfbi.fbdev->dev, "can't get ick\n");
-		return PTR_ERR(rfbi.dss_ick);
-	}
-
-	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
-	if (IS_ERR(rfbi.dss1_fck)) {
-		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
-		clk_put(rfbi.dss_ick);
-		return PTR_ERR(rfbi.dss1_fck);
-	}
-
-	return 0;
-}
-
-static void rfbi_put_clocks(void)
-{
-	clk_put(rfbi.dss1_fck);
-	clk_put(rfbi.dss_ick);
-}
-
-static void rfbi_enable_clocks(int enable)
-{
-	if (enable) {
-		clk_enable(rfbi.dss_ick);
-		clk_enable(rfbi.dss1_fck);
-	} else {
-		clk_disable(rfbi.dss1_fck);
-		clk_disable(rfbi.dss_ick);
-	}
-}
-
-
-#ifdef VERBOSE
-static void rfbi_print_timings(void)
-{
-	u32 l;
-	u32 time;
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	time = 1000000000 / rfbi.l4_khz;
-	if (l & (1 << 4))
-		time *= 2;
-
-	dev_dbg(rfbi.fbdev->dev, "Tick time %u ps\n", time);
-	l = rfbi_read_reg(RFBI_ONOFF_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
-		"REONTIME %d, REOFFTIME %d\n",
-		l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
-		(l >> 20) & 0x0f, (l >> 24) & 0x3f);
-
-	l = rfbi_read_reg(RFBI_CYCLE_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
-		"ACCESSTIME %d\n",
-		(l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
-		(l >> 22) & 0x3f);
-}
-#else
-static void rfbi_print_timings(void) {}
-#endif
-
-static void rfbi_set_timings(const struct extif_timings *t)
-{
-	u32 l;
-
-	BUG_ON(!t->converted);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]);
-	rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(1 << 4);
-	l |= (t->tim[2] ? 1 : 0) << 4;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_print_timings();
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
-{
-	*clk_period = 1000000000 / rfbi.l4_khz;
-	*max_clk_div = 2;
-}
-
-static int ps_to_rfbi_ticks(int time, int div)
-{
-	unsigned long tick_ps;
-	int ret;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = 1000000000 / (rfbi.l4_khz) * div;
-
-	ret = (time + tick_ps - 1) / tick_ps;
-
-	return ret;
-}
-
-#ifdef OMAP_RFBI_RATE_LIMIT
-static unsigned long rfbi_get_max_tx_rate(void)
-{
-	unsigned long	l4_rate, dss1_rate;
-	int		min_l4_ticks = 0;
-	int		i;
-
-	/* According to TI this can't be calculated so make the
-	 * adjustments for a couple of known frequencies and warn for
-	 * others.
-	 */
-	static const struct {
-		unsigned long l4_clk;		/* HZ */
-		unsigned long dss1_clk;		/* HZ */
-		unsigned long min_l4_ticks;
-	} ftab[] = {
-		{ 55,	132,	7, },		/* 7.86 MPix/s */
-		{ 110,	110,	12, },		/* 9.16 MPix/s */
-		{ 110,	132,	10, },		/* 11   Mpix/s */
-		{ 120,	120,	10, },		/* 12   Mpix/s */
-		{ 133,	133,	10, },		/* 13.3 Mpix/s */
-	};
-
-	l4_rate = rfbi.l4_khz / 1000;
-	dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000;
-
-	for (i = 0; i < ARRAY_SIZE(ftab); i++) {
-		/* Use a window instead of an exact match, to account
-		 * for different DPLL multiplier / divider pairs.
-		 */
-		if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
-		    abs(ftab[i].dss1_clk - dss1_rate) < 3) {
-			min_l4_ticks = ftab[i].min_l4_ticks;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(ftab)) {
-		/* Can't be sure, return anyway the maximum not
-		 * rate-limited. This might cause a problem only for the
-		 * tearing synchronisation.
-		 */
-		dev_err(rfbi.fbdev->dev,
-			"can't determine maximum RFBI transfer rate\n");
-		return rfbi.l4_khz * 1000;
-	}
-	return rfbi.l4_khz * 1000 / min_l4_ticks;
-}
-#else
-static int rfbi_get_max_tx_rate(void)
-{
-	return rfbi.l4_khz * 1000;
-}
-#endif
-
-
-static int rfbi_convert_timings(struct extif_timings *t)
-{
-	u32 l;
-	int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
-	int actim, recyc, wecyc;
-	int div = t->clk_div;
-
-	if (div <= 0 || div > 2)
-		return -1;
-
-	/* Make sure that after conversion it still holds that:
-	 * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
-	 * csoff > cson, csoff >= max(weoff, reoff), actim > reon
-	 */
-	weon = ps_to_rfbi_ticks(t->we_on_time, div);
-	weoff = ps_to_rfbi_ticks(t->we_off_time, div);
-	if (weoff <= weon)
-		weoff = weon + 1;
-	if (weon > 0x0f)
-		return -1;
-	if (weoff > 0x3f)
-		return -1;
-
-	reon = ps_to_rfbi_ticks(t->re_on_time, div);
-	reoff = ps_to_rfbi_ticks(t->re_off_time, div);
-	if (reoff <= reon)
-		reoff = reon + 1;
-	if (reon > 0x0f)
-		return -1;
-	if (reoff > 0x3f)
-		return -1;
-
-	cson = ps_to_rfbi_ticks(t->cs_on_time, div);
-	csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
-	if (csoff <= cson)
-		csoff = cson + 1;
-	if (csoff < max(weoff, reoff))
-		csoff = max(weoff, reoff);
-	if (cson > 0x0f)
-		return -1;
-	if (csoff > 0x3f)
-		return -1;
-
-	l =  cson;
-	l |= csoff << 4;
-	l |= weon  << 10;
-	l |= weoff << 14;
-	l |= reon  << 20;
-	l |= reoff << 24;
-
-	t->tim[0] = l;
-
-	actim = ps_to_rfbi_ticks(t->access_time, div);
-	if (actim <= reon)
-		actim = reon + 1;
-	if (actim > 0x3f)
-		return -1;
-
-	wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
-	if (wecyc < weoff)
-		wecyc = weoff;
-	if (wecyc > 0x3f)
-		return -1;
-
-	recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
-	if (recyc < reoff)
-		recyc = reoff;
-	if (recyc > 0x3f)
-		return -1;
-
-	cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
-	if (cs_pulse > 0x3f)
-		return -1;
-
-	l =  wecyc;
-	l |= recyc    << 6;
-	l |= cs_pulse << 12;
-	l |= actim    << 22;
-
-	t->tim[1] = l;
-
-	t->tim[2] = div - 1;
-
-	t->converted = 1;
-
-	return 0;
-}
-
-static int rfbi_setup_tearsync(unsigned pin_cnt,
-			       unsigned hs_pulse_time, unsigned vs_pulse_time,
-			       int hs_pol_inv, int vs_pol_inv, int extif_div)
-{
-	int hs, vs;
-	int min;
-	u32 l;
-
-	if (pin_cnt != 1 && pin_cnt != 2)
-		return -EINVAL;
-
-	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
-	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
-	if (hs < 2)
-		return -EDOM;
-	if (pin_cnt == 2)
-		min = 2;
-	else
-		min = 4;
-	if (vs < min)
-		return -EDOM;
-	if (vs == hs)
-		return -EINVAL;
-	rfbi.tearsync_pin_cnt = pin_cnt;
-	dev_dbg(rfbi.fbdev->dev,
-		"setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n",
-		pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
-	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	if (hs_pol_inv)
-		l &= ~(1 << 21);
-	else
-		l |= 1 << 21;
-	if (vs_pol_inv)
-		l &= ~(1 << 20);
-	else
-		l |= 1 << 20;
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static int rfbi_enable_tearsync(int enable, unsigned line)
-{
-	u32 l;
-
-	dev_dbg(rfbi.fbdev->dev, "tearsync %d line %d mode %d\n",
-		enable, line, rfbi.tearsync_mode);
-	if (line > (1 << 11) - 1)
-		return -EINVAL;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x3 << 2);
-	if (enable) {
-		rfbi.tearsync_mode = rfbi.tearsync_pin_cnt;
-		l |= rfbi.tearsync_mode << 2;
-	} else
-		rfbi.tearsync_mode = 0;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi_write_reg(RFBI_LINE_NUMBER, line);
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_write_command(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_CMD, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_CMD, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_read_data(void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		u16 *w = buf;
-		BUG_ON(len & ~1);
-		for (; len; len -= 2) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*w++ = rfbi_read_reg(RFBI_READ);
-		}
-	} else {
-		u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*b++ = rfbi_read_reg(RFBI_READ);
-		}
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_write_data(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_PARAM, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_PARAM, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_transfer_area(int width, int height,
-				void (callback)(void * data), void *data)
-{
-	u32 w;
-
-	BUG_ON(callback == NULL);
-
-	rfbi_enable_clocks(1);
-	omap_dispc_set_lcd_size(width, height);
-
-	rfbi.lcdc_callback = callback;
-	rfbi.lcdc_callback_data = data;
-
-	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	w |= 1;				/* enable */
-	if (!rfbi.tearsync_mode)
-		w |= 1 << 4;		/* internal trigger, reset by HW */
-	rfbi_write_reg(RFBI_CONTROL, w);
-
-	omap_dispc_enable_lcd_out(1);
-}
-
-static inline void _stop_transfer(void)
-{
-	u32 w;
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0));
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_dma_callback(void *data)
-{
-	_stop_transfer();
-	rfbi.lcdc_callback(rfbi.lcdc_callback_data);
-}
-
-static void rfbi_set_bits_per_cycle(int bpc)
-{
-	u32 l;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x03 << 0);
-
-	switch (bpc) {
-	case 8:
-		break;
-	case 16:
-		l |= 3;
-		break;
-	default:
-		BUG();
-	}
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi.bits_per_cycle = bpc;
-	rfbi_enable_clocks(0);
-}
-
-static int rfbi_init(struct omapfb_device *fbdev)
-{
-	u32 l;
-	int r;
-
-	rfbi.fbdev = fbdev;
-	rfbi.base = ioremap(RFBI_BASE, SZ_1K);
-	if (!rfbi.base) {
-		dev_err(fbdev->dev, "can't ioremap RFBI\n");
-		return -ENOMEM;
-	}
-
-	if ((r = rfbi_get_clocks()) < 0)
-		return r;
-	rfbi_enable_clocks(1);
-
-	rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000;
-
-	/* Reset */
-	rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1);
-	while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0)));
-
-	l = rfbi_read_reg(RFBI_SYSCONFIG);
-	/* Enable autoidle and smart-idle */
-	l |= (1 << 0) | (2 << 3);
-	rfbi_write_reg(RFBI_SYSCONFIG, l);
-
-	/* 16-bit interface, ITE trigger mode, 16-bit data */
-	l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7);
-	l |= (0 << 9) | (1 << 20) | (1 << 21);
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010);
-
-	l = rfbi_read_reg(RFBI_CONTROL);
-	/* Select CS0, clear bypass mode */
-	l = (0x01 << 2);
-	rfbi_write_reg(RFBI_CONTROL, l);
-
-	r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback,
-				   NULL);
-	if (r < 0) {
-		dev_err(fbdev->dev, "can't get DISPC irq\n");
-		rfbi_enable_clocks(0);
-		return r;
-	}
-
-	l = rfbi_read_reg(RFBI_REVISION);
-	pr_info("omapfb: RFBI version %d.%d initialized\n",
-		(l >> 4) & 0x0f, l & 0x0f);
-
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_cleanup(void)
-{
-	omap_dispc_free_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, NULL);
-	rfbi_put_clocks();
-	iounmap(rfbi.base);
-}
-
-const struct lcd_ctrl_extif omap2_ext_if = {
-	.init			= rfbi_init,
-	.cleanup		= rfbi_cleanup,
-	.get_clk_info		= rfbi_get_clk_info,
-	.get_max_tx_rate	= rfbi_get_max_tx_rate,
-	.set_bits_per_cycle	= rfbi_set_bits_per_cycle,
-	.convert_timings	= rfbi_convert_timings,
-	.set_timings		= rfbi_set_timings,
-	.write_command		= rfbi_write_command,
-	.read_data		= rfbi_read_data,
-	.write_data		= rfbi_write_data,
-	.transfer_area		= rfbi_transfer_area,
-	.setup_tearsync		= rfbi_setup_tearsync,
-	.enable_tearsync	= rfbi_enable_tearsync,
-
-	.max_transmit_size	= (u32) ~0,
-};
-
-- 
cgit v1.2.3-70-g09d2


From 2a803c887b654bad7d6699f1270eaac31361afc9 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 18 Apr 2011 13:18:20 +0300
Subject: OMAPDSS: Remove video SRAM support

OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the omapdss driver
to simplify memory handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/vram.h    | 21 +------
 drivers/video/omap2/dss/dispc.c           |  1 -
 drivers/video/omap2/omapfb/omapfb-ioctl.c |  2 +-
 drivers/video/omap2/omapfb/omapfb-main.c  |  4 +-
 drivers/video/omap2/vram.c                | 99 ++-----------------------------
 5 files changed, 9 insertions(+), 118 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index 0aa4ecd12c7..4d65b7d06e6 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -23,40 +23,21 @@
 
 #include <linux/types.h>
 
-#define OMAP_VRAM_MEMTYPE_SDRAM		0
-#define OMAP_VRAM_MEMTYPE_SRAM		1
-#define OMAP_VRAM_MEMTYPE_MAX		1
-
 extern int omap_vram_add_region(unsigned long paddr, size_t size);
 extern int omap_vram_free(unsigned long paddr, size_t size);
-extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_alloc(size_t size, unsigned long *paddr);
 extern int omap_vram_reserve(unsigned long paddr, size_t size);
 extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
 		unsigned long *largest_free_block);
 
 #ifdef CONFIG_OMAP2_VRAM
 extern void omap_vram_set_sdram_vram(u32 size, u32 start);
-extern void omap_vram_set_sram_vram(u32 size, u32 start);
 
 extern void omap_vram_reserve_sdram_memblock(void);
-extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
-					    unsigned long sram_vstart,
-					    unsigned long sram_size,
-					    unsigned long pstart_avail,
-					    unsigned long size_avail);
 #else
 static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
-static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
 
 static inline void omap_vram_reserve_sdram_memblock(void) { }
-static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
-					    unsigned long sram_vstart,
-					    unsigned long sram_size,
-					    unsigned long pstart_avail,
-					    unsigned long size_avail)
-{
-	return 0;
-}
 #endif
 
 #endif
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e1626a1d5c4..0aecb680f8a 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,7 +37,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
-#include <plat/sram.h>
 #include <plat/clock.h>
 
 #include <video/omapdss.h>
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 16ba6196f33..6a09ef87e14 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -215,7 +215,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	int r = 0, i;
 	size_t size;
 
-	if (mi->type > OMAPFB_MEMTYPE_MAX)
+	if (mi->type != OMAPFB_MEMTYPE_SDRAM)
 		return -EINVAL;
 
 	size = PAGE_ALIGN(mi->size);
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ce158311ff5..17e7320b48d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1399,7 +1399,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
 
 	if (!paddr) {
 		DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
-		r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr);
+		r = omap_vram_alloc(size, &paddr);
 	} else {
 		DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
 				ofbi->id);
@@ -1669,7 +1669,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 	int old_type = rg->type;
 	int r;
 
-	if (type > OMAPFB_MEMTYPE_MAX)
+	if (type != OMAPFB_MEMTYPE_SDRAM)
 		return -EINVAL;
 
 	size = PAGE_ALIGN(size);
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 9441e2eb3de..87e421e25af 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -33,7 +33,6 @@
 
 #include <asm/setup.h>
 
-#include <plat/sram.h>
 #include <plat/vram.h>
 #include <plat/dma.h>
 
@@ -43,10 +42,6 @@
 #define DBG(format, ...)
 #endif
 
-#define OMAP2_SRAM_START		0x40200000
-/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
-
 /* postponed regions are used to temporarily store region information at boot
  * time when we cannot yet allocate the region list */
 #define MAX_POSTPONED_REGIONS 10
@@ -74,15 +69,6 @@ struct vram_region {
 static DEFINE_MUTEX(region_mutex);
 static LIST_HEAD(region_list);
 
-static inline int region_mem_type(unsigned long paddr)
-{
-	if (paddr >= OMAP2_SRAM_START &&
-	    paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
-		return OMAP_VRAM_MEMTYPE_SRAM;
-	else
-		return OMAP_VRAM_MEMTYPE_SDRAM;
-}
-
 static struct vram_region *omap_vram_create_region(unsigned long paddr,
 		unsigned pages)
 {
@@ -212,9 +198,6 @@ static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
 
 		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
 
-		if (region_mem_type(rm->paddr) != region_mem_type(paddr))
-			continue;
-
 		start = rm->paddr;
 		end = start + (rm->pages << PAGE_SHIFT) - 1;
 		if (start > paddr || end < paddr + size - 1)
@@ -320,7 +303,7 @@ err:
 	return r;
 }
 
-static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
+static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
 {
 	struct vram_region *rm;
 	struct vram_alloc *alloc;
@@ -330,9 +313,6 @@ static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
 
 		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
 
-		if (region_mem_type(rm->paddr) != mtype)
-			continue;
-
 		start = rm->paddr;
 
 		list_for_each_entry(alloc, &rm->alloc_list, list) {
@@ -365,21 +345,21 @@ found:
 	return -ENOMEM;
 }
 
-int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
+int omap_vram_alloc(size_t size, unsigned long *paddr)
 {
 	unsigned pages;
 	int r;
 
-	BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size);
+	BUG_ON(!size);
 
-	DBG("alloc mem type %d size %d\n", mtype, size);
+	DBG("alloc mem size %d\n", size);
 
 	size = PAGE_ALIGN(size);
 	pages = size >> PAGE_SHIFT;
 
 	mutex_lock(&region_mutex);
 
-	r = _omap_vram_alloc(mtype, pages, paddr);
+	r = _omap_vram_alloc(pages, paddr);
 
 	mutex_unlock(&region_mutex);
 
@@ -500,10 +480,6 @@ arch_initcall(omap_vram_init);
 
 /* boottime vram alloc stuff */
 
-/* set from board file */
-static u32 omap_vram_sram_start __initdata;
-static u32 omap_vram_sram_size __initdata;
-
 /* set from board file */
 static u32 omap_vram_sdram_start __initdata;
 static u32 omap_vram_sdram_size __initdata;
@@ -587,73 +563,8 @@ void __init omap_vram_reserve_sdram_memblock(void)
 	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
 }
 
-/*
- * Called at sram init time, before anything is pushed to the SRAM stack.
- * Because of the stack scheme, we will allocate everything from the
- * start of the lowest address region to the end of SRAM. This will also
- * include padding for page alignment and possible holes between regions.
- *
- * As opposed to the SDRAM case, we'll also do any dynamic allocations at
- * this point, since the driver built as a module would have problem with
- * freeing / reallocating the regions.
- */
-unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart,
-				  unsigned long sram_vstart,
-				  unsigned long sram_size,
-				  unsigned long pstart_avail,
-				  unsigned long size_avail)
-{
-	unsigned long			pend_avail;
-	unsigned long			reserved;
-	u32 paddr;
-	u32 size;
-
-	paddr = omap_vram_sram_start;
-	size = omap_vram_sram_size;
-
-	if (!size)
-		return 0;
-
-	reserved = 0;
-	pend_avail = pstart_avail + size_avail;
-
-	if (!paddr) {
-		/* Dynamic allocation */
-		if ((size_avail & PAGE_MASK) < size) {
-			pr_err("Not enough SRAM for VRAM\n");
-			return 0;
-		}
-		size_avail = (size_avail - size) & PAGE_MASK;
-		paddr = pstart_avail + size_avail;
-	}
-
-	if (paddr < sram_pstart ||
-			paddr + size > sram_pstart + sram_size) {
-		pr_err("Illegal SRAM region for VRAM\n");
-		return 0;
-	}
-
-	/* Reserve everything above the start of the region. */
-	if (pend_avail - paddr > reserved)
-		reserved = pend_avail - paddr;
-	size_avail = pend_avail - reserved - pstart_avail;
-
-	omap_vram_add_region(paddr, size);
-
-	if (reserved)
-		pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
-
-	return reserved;
-}
-
 void __init omap_vram_set_sdram_vram(u32 size, u32 start)
 {
 	omap_vram_sdram_start = start;
 	omap_vram_sdram_size = size;
 }
-
-void __init omap_vram_set_sram_vram(u32 size, u32 start)
-{
-	omap_vram_sram_start = start;
-	omap_vram_sram_size = size;
-}
-- 
cgit v1.2.3-70-g09d2


From 1896e2f145ef95e7b9a5271332066e27a8750a16 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 10:07:24 +0300
Subject: OMAPFB: Remove video SRAM support (old omapfb)

OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the old omapfb
driver to simplify memory handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/fb.c          | 172 ---------------------------------------
 arch/arm/plat-omap/fb.h          |  10 ---
 drivers/video/omap/omapfb_main.c |   2 +-
 3 files changed, 1 insertion(+), 183 deletions(-)
 delete mode 100644 arch/arm/plat-omap/fb.h

(limited to 'drivers/video')

diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index c9e5d7298c4..15d4d1657b1 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -34,9 +34,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/sram.h>
-
-#include "fb.h"
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -74,24 +71,6 @@ static inline int range_included(unsigned long start1, unsigned long size1,
 	return start1 >= start2 && start1 + size1 <= start2 + size2;
 }
 
-
-/* Check if there is an overlapping region. */
-static int fbmem_region_reserved(unsigned long start, size_t size)
-{
-	struct omapfb_mem_region *rg;
-	int i;
-
-	rg = &omapfb_config.mem_desc.region[0];
-	for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
-		if (!rg->paddr)
-			/* Empty slot. */
-			continue;
-		if (ranges_overlap(start, size, rg->paddr, rg->size))
-			return 1;
-	}
-	return 0;
-}
-
 /*
  * Get the region_idx`th region from board config/ATAG and convert it to
  * our internal format.
@@ -119,60 +98,6 @@ static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
 	return 0;
 }
 
-static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
-				  unsigned long mem_start,
-				  unsigned long mem_size)
-{
-	/*
-	 * Check if the configuration specifies the type explicitly.
-	 * type = 0 && paddr = 0, a default don't care case maps to
-	 * the SDRAM type.
-	 */
-	if (rg->type || !rg->paddr)
-		return 0;
-	if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
-		rg->type = mem_type;
-		return 0;
-	}
-	/* Can't determine it. */
-	return -1;
-}
-
-static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
-			      unsigned long start_avail, unsigned size_avail)
-{
-	unsigned long	paddr = rg->paddr;
-	size_t		size = rg->size;
-
-	if (rg->type > OMAPFB_MEMTYPE_MAX) {
-		printk(KERN_ERR
-			"Invalid start address for FB region %d\n", region_idx);
-		return -EINVAL;
-	}
-
-	if (!rg->size) {
-		printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
-		return -EINVAL;
-	}
-
-	if (!paddr)
-		/* Allocate this dynamically, leave paddr 0 for now. */
-		return 0;
-
-	/*
-	 * Fixed region for the given RAM range. Check if it's already
-	 * reserved by the FB code or someone else.
-	 */
-	if (fbmem_region_reserved(paddr, size) ||
-	    !range_included(paddr, size, start_avail, size_avail)) {
-		printk(KERN_ERR "Trying to use reserved memory "
-			"for FB region %d\n", region_idx);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int valid_sdram(unsigned long addr, unsigned long size)
 {
 	return memblock_is_region_memory(addr, size);
@@ -250,85 +175,6 @@ void __init omapfb_reserve_sdram_memblock(void)
 			 reserved);
 }
 
-/*
- * Called at sram init time, before anything is pushed to the SRAM stack.
- * Because of the stack scheme, we will allocate everything from the
- * start of the lowest address region to the end of SRAM. This will also
- * include padding for page alignment and possible holes between regions.
- *
- * As opposed to the SDRAM case, we'll also do any dynamic allocations at
- * this point, since the driver built as a module would have problem with
- * freeing / reallocating the regions.
- */
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
-				  unsigned long sram_vstart,
-				  unsigned long sram_size,
-				  unsigned long pstart_avail,
-				  unsigned long size_avail)
-{
-	struct omapfb_mem_region	rg;
-	unsigned long			pend_avail;
-	unsigned long			reserved;
-	int				i;
-
-	if (config_invalid)
-		return 0;
-
-	reserved = 0;
-	pend_avail = pstart_avail + size_avail;
-	for (i = 0; ; i++) {
-		if (get_fbmem_region(i, &rg) < 0)
-			break;
-		if (i == OMAPFB_PLANE_NUM) {
-			printk(KERN_ERR
-				"Extraneous FB mem configuration entries\n");
-			config_invalid = 1;
-			return 0;
-		}
-
-		/* Check if it's our memory type. */
-		if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
-				          sram_pstart, sram_size) < 0 ||
-		    (rg.type != OMAPFB_MEMTYPE_SRAM))
-			continue;
-		BUG_ON(omapfb_config.mem_desc.region[i].size);
-
-		if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
-			config_invalid = 1;
-			return 0;
-		}
-
-		if (!rg.paddr) {
-			/* Dynamic allocation */
-			if ((size_avail & PAGE_MASK) < rg.size) {
-				printk("Not enough SRAM for FB region %d\n",
-					i);
-				config_invalid = 1;
-				return 0;
-			}
-			size_avail = (size_avail - rg.size) & PAGE_MASK;
-			rg.paddr = pstart_avail + size_avail;
-		}
-		/* Reserve everything above the start of the region. */
-		if (pend_avail - rg.paddr > reserved)
-			reserved = pend_avail - rg.paddr;
-		size_avail = pend_avail - reserved - pstart_avail;
-
-		/*
-		 * We have a kernel mapping for this already, so the
-		 * driver won't have to make one.
-		 */
-		rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
-		omapfb_config.mem_desc.region[i] = rg;
-		configured_regions++;
-	}
-	omapfb_config.mem_desc.region_cnt = i;
-	if (reserved)
-		pr_info("Reserving %lu bytes SRAM for frame buffer\n",
-			 reserved);
-	return reserved;
-}
-
 void omapfb_set_ctrl_platform_data(void *data)
 {
 	omapfb_config.ctrl_platform_data = data;
@@ -390,15 +236,6 @@ void omapfb_reserve_sdram_memblock(void)
 {
 }
 
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
-				  unsigned long sram_vstart,
-				  unsigned long sram_size,
-				  unsigned long start_avail,
-				  unsigned long size_avail)
-{
-	return 0;
-}
-
 #else
 
 void omapfb_set_platform_data(struct omapfb_platform_data *data)
@@ -409,13 +246,4 @@ void omapfb_reserve_sdram_memblock(void)
 {
 }
 
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
-				  unsigned long sram_vstart,
-				  unsigned long sram_size,
-				  unsigned long start_avail,
-				  unsigned long size_avail)
-{
-	return 0;
-}
-
 #endif
diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h
deleted file mode 100644
index d765d0bd852..00000000000
--- a/arch/arm/plat-omap/fb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __PLAT_OMAP_FB_H__
-#define __PLAT_OMAP_FB_H__
-
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
-					 unsigned long sram_vstart,
-					 unsigned long sram_size,
-					 unsigned long pstart_avail,
-					 unsigned long size_avail);
-
-#endif /* __PLAT_OMAP_FB_H__ */
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 73924bc9959..aaf0990162c 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -867,7 +867,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 
 	if (fbdev->ctrl->setup_mem == NULL)
 		return -ENODEV;
-	if (mi->type > OMAPFB_MEMTYPE_MAX)
+	if (mi->type != OMAPFB_MEMTYPE_SDRAM)
 		return -EINVAL;
 
 	size = PAGE_ALIGN(mi->size);
-- 
cgit v1.2.3-70-g09d2


From 58e0d6ab02eb90e67720ef1c20ab606749a9ef29 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 12:16:49 +0300
Subject: OMAP: N770: remove HWA742 platform data

In an effort to clean up the old omapfb driver, this patch removes
HWA742 (the display chip used in N770) platform data. This can be done
as N770 is the only user of HWA742, and the platform data contains only
one field, te_connected, which we can just presume to be true in the
HWA742 driver.

This allows us to remove omapfb_set_ctrl_platform_data(), and the
mechanism to pass the platform data, in a later patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-nokia770.c     |  6 ------
 arch/arm/plat-omap/include/plat/hwa742.h |  8 --------
 drivers/video/omap/hwa742.c              | 21 +++++----------------
 3 files changed, 5 insertions(+), 30 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/plat/hwa742.h

(limited to 'drivers/video')

diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index f9efc036ba9..7155d8ce516 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -31,7 +31,6 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include "common.h"
-#include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
@@ -150,14 +149,9 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
-static struct hwa742_platform_data nokia770_hwa742_platform_data = {
-	.te_connected		= 1,
-};
-
 static void __init hwa742_dev_init(void)
 {
 	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
-	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
 }
 
 /* assume no Mini-AB port */
diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
deleted file mode 100644
index 886248d32b4..00000000000
--- a/arch/arm/plat-omap/include/plat/hwa742.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _HWA742_H
-#define _HWA742_H
-
-struct hwa742_platform_data {
-	unsigned	te_connected:1;
-};
-
-#endif
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 084aa0ac562..9f1d23c319c 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -28,7 +28,6 @@
 #include <linux/interrupt.h>
 
 #include <plat/dma.h>
-#include <plat/hwa742.h>
 #include "omapfb.h"
 
 #define HWA742_REV_CODE_REG       0x0
@@ -942,7 +941,6 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	unsigned long sys_clk, pix_clk;
 	int extif_mem_div;
 	struct omapfb_platform_data *omapfb_conf;
-	struct hwa742_platform_data *ctrl_conf;
 
 	BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
 
@@ -951,13 +949,6 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	hwa742.int_ctrl = fbdev->int_ctrl;
 
 	omapfb_conf = fbdev->dev->platform_data;
-	ctrl_conf = omapfb_conf->ctrl_platform_data;
-
-	if (ctrl_conf == NULL) {
-		dev_err(fbdev->dev, "HWA742: missing platform data\n");
-		r = -ENOENT;
-		goto err1;
-	}
 
 	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
@@ -995,14 +986,12 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 		goto err4;
 	}
 
-	if (ctrl_conf->te_connected) {
-		if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
-			dev_err(hwa742.fbdev->dev,
-			       "HWA742: can't setup tearing synchronization\n");
-			goto err4;
-		}
-		hwa742.te_connected = 1;
+	if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
+		dev_err(hwa742.fbdev->dev,
+			"HWA742: can't setup tearing synchronization\n");
+		goto err4;
 	}
+	hwa742.te_connected = 1;
 
 	hwa742.max_transmit_size = hwa742.extif->max_transmit_size;
 
-- 
cgit v1.2.3-70-g09d2


From 80277566d0d85b3430548ba87ad28b0585ef06a6 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 14:27:44 +0300
Subject: OMAPFB: remove mem info from platform_data

omapfb driver used platform_data to get fb memory areas and formats
defined by the board file.

This patch removes omapfb's (both old and new omapfb) use of the
memory data in platform_data, because:

- No board uses them currently
- It's not board file's job to define things like amount of default
  framebuffer memory. These should come from the bootloader via command
  line parameters.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/omapfb_main.c         |  5 ----
 drivers/video/omap2/omapfb/omapfb-main.c | 43 --------------------------------
 include/linux/omapfb.h                   |  1 -
 3 files changed, 49 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index aaf0990162c..3d2e1479821 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -157,11 +157,6 @@ static int ctrl_init(struct omapfb_device *fbdev)
 			fbdev->mem_desc.region[i].size =
 				PAGE_ALIGN(def_vram[i]);
 		fbdev->mem_desc.region_cnt = i;
-	} else {
-		struct omapfb_platform_data *conf;
-
-		conf = fbdev->dev->platform_data;
-		fbdev->mem_desc = conf->mem_desc;
 	}
 
 	if (!fbdev->mem_desc.region_cnt) {
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 17e7320b48d..4c28d57e34d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1614,23 +1614,6 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
 		memset(&vram_paddrs, 0, sizeof(vram_paddrs));
 	}
 
-	if (fbdev->dev->platform_data) {
-		struct omapfb_platform_data *opd;
-		opd = fbdev->dev->platform_data;
-		for (i = 0; i < opd->mem_desc.region_cnt; ++i) {
-			if (!vram_sizes[i]) {
-				unsigned long size;
-				unsigned long paddr;
-
-				size = opd->mem_desc.region[i].size;
-				paddr = opd->mem_desc.region[i].paddr;
-
-				vram_sizes[i] = size;
-				vram_paddrs[i] = paddr;
-			}
-		}
-	}
-
 	for (i = 0; i < fbdev->num_fbs; i++) {
 		/* allocate memory automatically only for fb0, or if
 		 * excplicitly defined with vram or plat data option */
@@ -1828,32 +1811,6 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
 
 	var->rotate = def_rotate;
 
-	/*
-	 * Check if there is a default color format set in the board file,
-	 * and use this format instead the default deducted from the
-	 * display bpp.
-	 */
-	if (fbdev->dev->platform_data) {
-		struct omapfb_platform_data *opd;
-		int id = ofbi->id;
-
-		opd = fbdev->dev->platform_data;
-		if (opd->mem_desc.region[id].format_used) {
-			enum omap_color_mode mode;
-			enum omapfb_color_format format;
-
-			format = opd->mem_desc.region[id].format;
-			mode = fb_format_to_dss_mode(format);
-			if (mode < 0) {
-				r = mode;
-				goto err;
-			}
-			r = dss_mode_to_fb_mode(mode, var);
-			if (r < 0)
-				goto err;
-		}
-	}
-
 	if (display) {
 		u16 w, h;
 		int rotation = (var->rotate + ofbi->rotation[0]) % 4;
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 7ab9cebf916..03f52555ce6 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -249,7 +249,6 @@ struct omapfb_mem_desc {
 
 struct omapfb_platform_data {
 	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
 };
 
 /* in arch/arm/plat-omap/fb.c */
-- 
cgit v1.2.3-70-g09d2


From 82d5b3e2319c9d1ea46c95b1e8b0db66d6f05a84 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 14:35:35 +0300
Subject: OMAPFB: remove unused fb_format_to_dss_mode()

fb_format_to_dss_mode() function is no longer used, so remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 54 --------------------------------
 1 file changed, 54 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 4c28d57e34d..b00db4068d2 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1487,60 +1487,6 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
 	return omapfb_alloc_fbmem(fbi, size, paddr);
 }
 
-static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format fmt)
-{
-	enum omap_color_mode mode;
-
-	switch (fmt) {
-	case OMAPFB_COLOR_RGB565:
-		mode = OMAP_DSS_COLOR_RGB16;
-		break;
-	case OMAPFB_COLOR_YUV422:
-		mode = OMAP_DSS_COLOR_YUV2;
-		break;
-	case OMAPFB_COLOR_CLUT_8BPP:
-		mode = OMAP_DSS_COLOR_CLUT8;
-		break;
-	case OMAPFB_COLOR_CLUT_4BPP:
-		mode = OMAP_DSS_COLOR_CLUT4;
-		break;
-	case OMAPFB_COLOR_CLUT_2BPP:
-		mode = OMAP_DSS_COLOR_CLUT2;
-		break;
-	case OMAPFB_COLOR_CLUT_1BPP:
-		mode = OMAP_DSS_COLOR_CLUT1;
-		break;
-	case OMAPFB_COLOR_RGB444:
-		mode = OMAP_DSS_COLOR_RGB12U;
-		break;
-	case OMAPFB_COLOR_YUY422:
-		mode = OMAP_DSS_COLOR_UYVY;
-		break;
-	case OMAPFB_COLOR_ARGB16:
-		mode = OMAP_DSS_COLOR_ARGB16;
-		break;
-	case OMAPFB_COLOR_RGB24U:
-		mode = OMAP_DSS_COLOR_RGB24U;
-		break;
-	case OMAPFB_COLOR_RGB24P:
-		mode = OMAP_DSS_COLOR_RGB24P;
-		break;
-	case OMAPFB_COLOR_ARGB32:
-		mode = OMAP_DSS_COLOR_ARGB32;
-		break;
-	case OMAPFB_COLOR_RGBA32:
-		mode = OMAP_DSS_COLOR_RGBA32;
-		break;
-	case OMAPFB_COLOR_RGBX32:
-		mode = OMAP_DSS_COLOR_RGBX32;
-		break;
-	default:
-		mode = -EINVAL;
-	}
-
-	return mode;
-}
-
 static int omapfb_parse_vram_param(const char *param, int max_entries,
 		unsigned long *sizes, unsigned long *paddrs)
 {
-- 
cgit v1.2.3-70-g09d2


From 8f5e35a7942afe70eb0ba0d8193801b7989ae03a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 20 Sep 2011 14:43:14 +0300
Subject: OMAPFB: Move old omapfb private structs to a private include file

include/linux/omapfb.h contains structs that are used only by the
omapfb driver. Move the structs into drivers/video/omap/omapfb.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/omapfb.h | 25 +++++++++++++++++++++++++
 include/linux/omapfb.h      | 25 -------------------------
 2 files changed, 25 insertions(+), 25 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index 3a5ab13845f..07fe4987889 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -47,6 +47,31 @@
 
 struct omapfb_device;
 
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
+	unsigned	format_used:1;	/* Must be set when format is set.
+					 * Needed b/c of the badly chosen 0
+					 * base for OMAPFB_COLOR_* values
+					 */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
 struct lcd_panel {
 	const char	*name;
 	int		config;		/* TFT/STN, signal inversion */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 03f52555ce6..7a8e0ea345e 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -222,31 +222,6 @@ struct omapfb_display_info {
 
 #include <plat/board.h>
 
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
-	unsigned	format_used:1;	/* Must be set when format is set.
-					 * Needed b/c of the badly chosen 0
-					 * base for OMAPFB_COLOR_* values
-					 */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
 struct omapfb_platform_data {
 	struct omap_lcd_config		lcd;
 };
-- 
cgit v1.2.3-70-g09d2


From ae7e1f2d0b9cf37d4ca4d55b264110e4c880f7ed Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 24 Jan 2012 11:00:54 +0200
Subject: OMAPFB: remove remaining OMAP arch checks

Now that the old omapfb driver is only omap1 display driver, there's no
need to check if the arch is omap1. This patch removes the few remaining
checks for the arch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap/Makefile      | 6 ++----
 drivers/video/omap/omapfb.h      | 4 ----
 drivers/video/omap/omapfb_main.c | 3 +--
 3 files changed, 3 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 79653750448..1927faffb5b 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -4,11 +4,9 @@
 
 obj-$(CONFIG_FB_OMAP) += omapfb.o
 
-objs-yy := omapfb_main.o
+objs-yy := omapfb_main.o lcdc.o
 
-objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-
-objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
+objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
 
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index 07fe4987889..2921d20e4fb 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -47,11 +47,7 @@
 
 struct omapfb_device;
 
-#ifdef CONFIG_ARCH_OMAP1
 #define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
 
 struct omapfb_mem_region {
 	u32		paddr;
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 3d2e1479821..f54b463709e 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -1741,8 +1741,7 @@ static int omapfb_do_probe(struct platform_device *pdev,
 
 #ifdef CONFIG_FB_OMAP_DMA_TUNE
 	/* Set DMA priority for EMIFF access to highest */
-	if (cpu_class_is_omap1())
-		omap_set_dma_priority(0, OMAP_DMA_PORT_EMIFF, 15);
+	omap_set_dma_priority(0, OMAP_DMA_PORT_EMIFF, 15);
 #endif
 
 	r = ctrl_change_mode(fbdev->fb_info[0]);
-- 
cgit v1.2.3-70-g09d2


From 640ba2444fa95261f23a2b86e69aabe723332bed Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sat, 18 Feb 2012 19:19:29 +0100
Subject: drivers/video/pxa168fb.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

By using devm_ioremap, it also removes a potential memory leak, because
there was no call to iounmap in the probe function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/pxa168fb.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 8384b941f6b..f146089261f 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -21,6 +21,7 @@
 #include <linux/fb.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -670,7 +671,8 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev)
 	/*
 	 * Map LCD controller registers.
 	 */
-	fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
+	fbi->reg_base = devm_ioremap_nocache(&pdev->dev, res->start,
+					     resource_size(res));
 	if (fbi->reg_base == NULL) {
 		ret = -ENOMEM;
 		goto failed_free_info;
@@ -739,8 +741,8 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev)
 	/*
 	 * Register irq handler.
 	 */
-	ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED,
-					info->fix.id, fbi);
+	ret = devm_request_irq(&pdev->dev, irq, pxa168fb_handle_irq,
+			       IRQF_SHARED, info->fix.id, fbi);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to request IRQ\n");
 		ret = -ENXIO;
@@ -759,14 +761,12 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret);
 		ret = -ENXIO;
-		goto failed_free_irq;
+		goto failed_free_cmap;
 	}
 
 	platform_set_drvdata(pdev, fbi);
 	return 0;
 
-failed_free_irq:
-	free_irq(irq, fbi);
 failed_free_cmap:
 	fb_dealloc_cmap(&info->cmap);
 failed_free_clk:
@@ -808,13 +808,10 @@ static int __devexit pxa168fb_remove(struct platform_device *pdev)
 		fb_dealloc_cmap(&info->cmap);
 
 	irq = platform_get_irq(pdev, 0);
-	free_irq(irq, fbi);
 
 	dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
 				info->screen_base, info->fix.smem_start);
 
-	iounmap(fbi->reg_base);
-
 	clk_disable(fbi->clk);
 	clk_put(fbi->clk);
 
-- 
cgit v1.2.3-70-g09d2


From 327e27681c27d3ed5ea470ec483904d1a318cb7f Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Mon, 20 Feb 2012 19:40:19 +0900
Subject: video: s3c-fb: use devm_request_irq()

The devm_ functions allocate memory that is released when a driver
detaches. This patch uses devm_request_irq of these functions.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/s3c-fb.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index e22bf9ddf28..1fb7ddf8fb5 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -1433,7 +1433,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 		goto err_lcd_clk;
 	}
 	sfb->irq_no = res->start;
-	ret = request_irq(sfb->irq_no, s3c_fb_irq,
+	ret = devm_request_irq(dev, sfb->irq_no, s3c_fb_irq,
 			  0, "s3c_fb", sfb);
 	if (ret) {
 		dev_err(dev, "irq request failed\n");
@@ -1499,7 +1499,6 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 
 err_pm_runtime:
 	pm_runtime_put_sync(sfb->dev);
-	free_irq(sfb->irq_no, sfb);
 
 err_lcd_clk:
 	pm_runtime_disable(sfb->dev);
@@ -1535,8 +1534,6 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 		if (sfb->windows[win])
 			s3c_fb_release_win(sfb, sfb->windows[win]);
 
-	free_irq(sfb->irq_no, sfb);
-
 	if (!sfb->variant.has_clksel) {
 		clk_disable(sfb->lcd_clk);
 		clk_put(sfb->lcd_clk);
-- 
cgit v1.2.3-70-g09d2


From 7cb66dcc828662c8cacb74af08478433cef102b1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 21 Feb 2012 12:15:09 +0000
Subject: FB: sa11x0: convert to use platform resource and ioremap()

Convert the sa11x0 framebuffer driver to obtain the base address of its
hardware registers from the platform resources, and ioremap this rather
than relying on the static mappings.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/include/mach/SA-1100.h | 10 -----
 drivers/video/sa1100fb.c                    | 68 ++++++++++++++++++-----------
 drivers/video/sa1100fb.h                    | 11 +++++
 3 files changed, 54 insertions(+), 35 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index bae8296f5db..3a4d4e067ed 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1903,16 +1903,6 @@
 #define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
                 	        	/* (Alternative)                   */
 
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
 #define LCCR0_LEN	0x00000001	/* LCD ENable                      */
 #define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 379b2c5000a..b6325848ad6 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -705,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * Only update the registers if the controller is enabled
 	 * and something has changed.
 	 */
-	if ((LCCR0 != fbi->reg_lccr0)       || (LCCR1 != fbi->reg_lccr1) ||
-	    (LCCR2 != fbi->reg_lccr2)       || (LCCR3 != fbi->reg_lccr3) ||
-	    (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+	if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+	    readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+	    readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+	    readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+	    readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+	    readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
 		sa1100fb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -789,28 +792,29 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
 
 	/* Sequence from 11.7.10 */
-	LCCR3 = fbi->reg_lccr3;
-	LCCR2 = fbi->reg_lccr2;
-	LCCR1 = fbi->reg_lccr1;
-	LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
-	DBAR1 = fbi->dbar1;
-	DBAR2 = fbi->dbar2;
-	LCCR0 |= LCCR0_LEN;
+	writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+	writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+	writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+	writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+	writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
 
 	if (machine_is_shannon())
 		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
 
-	dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
-	dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
-	dev_dbg(fbi->dev, "LCCR0 = 0x%08lx\n", LCCR0);
-	dev_dbg(fbi->dev, "LCCR1 = 0x%08lx\n", LCCR1);
-	dev_dbg(fbi->dev, "LCCR2 = 0x%08lx\n", LCCR2);
-	dev_dbg(fbi->dev, "LCCR3 = 0x%08lx\n", LCCR3);
+	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+	dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+	dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+	dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+	dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
 	DECLARE_WAITQUEUE(wait, current);
+	u32 lccr0;
 
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
@@ -820,9 +824,14 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
 
-	LCSR = 0xffffffff;	/* Clear LCD Status Register */
-	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
-	LCCR0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	/* Clear LCD Status Register */
+	writel_relaxed(~0, fbi->base + LCSR);
+
+	lccr0 = readl_relaxed(fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -834,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
 {
 	struct sa1100fb_info *fbi = dev_id;
-	unsigned int lcsr = LCSR;
+	unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
 
 	if (lcsr & LCSR_LDD) {
-		LCCR0 |= LCCR0_LDM;
+		u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+		writel_relaxed(lccr0, fbi->base + LCCR0);
 		wake_up(&fbi->ctrlr_wait);
 	}
 
-	LCSR = lcsr;
+	writel_relaxed(lcsr, fbi->base + LCSR);
 	return IRQ_HANDLED;
 }
 
@@ -1198,6 +1208,7 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
+	struct resource *res;
 	int ret, irq;
 
 	if (!pdev->dev.platform_data) {
@@ -1205,11 +1216,12 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0 || !res)
 		return -EINVAL;
 
-	if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+	if (!request_mem_region(res->start, resource_size(res), "LCD"))
 		return -EBUSY;
 
 	fbi = sa1100fb_init_fbinfo(&pdev->dev);
@@ -1217,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	if (!fbi)
 		goto failed;
 
+	fbi->base = ioremap(res->start, resource_size(res));
+	if (!fbi->base)
+		goto failed;
+
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
 	if (ret)
@@ -1263,9 +1279,11 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
  err_free_irq:
 	free_irq(irq, fbi);
  failed:
+	if (fbi)
+		iounmap(fbi->base);
 	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
-	release_mem_region(0xb0100000, 0x10000);
+	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h
index e968e1d6952..fc5d4292fad 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/sa1100fb.h
@@ -10,6 +10,16 @@
  * for more details.
  */
 
+#define LCCR0           0x0000          /* LCD Control Reg. 0 */
+#define LCSR            0x0004          /* LCD Status Reg. */
+#define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1           0x0014          /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2           0x0018          /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2           0x001C          /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1           0x0020          /* LCD Control Reg. 1 */
+#define LCCR2           0x0024          /* LCD Control Reg. 2 */
+#define LCCR3           0x0028          /* LCD Control Reg. 3 */
+
 /* Shadows for LCD controller registers */
 struct sa1100fb_lcd_reg {
 	unsigned long lccr0;
@@ -22,6 +32,7 @@ struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
 	const struct sa1100fb_rgb *rgb[NR_RGB];
+	void __iomem		*base;
 
 	/*
 	 * These are the addresses we mapped
-- 
cgit v1.2.3-70-g09d2


From 1ca8c07bda717c683a8fb148f92ab484928414b6 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 24 Feb 2012 10:34:32 -0800
Subject: ARM: OMAP2+: Drop DISPC L3 firewall code

This is only needed when using SRAM for framebuffer,
and the support for SRAM framebuffer is about to get
removed.

Otherwise we cannot move most of plat/io.h to be a local
iomap.h for mach-omap2.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/dss/dispc.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e1626a1d5c4..cce0820f3bc 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3272,11 +3272,6 @@ static void _omap_dispc_initial_config(void)
 	if (dss_has_feature(FEAT_FUNCGATED))
 		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 
-	/* L3 firewall setting: enable access to OCM RAM */
-	/* XXX this should be somewhere in plat-omap */
-	if (cpu_is_omap24xx())
-		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
-
 	_dispc_setup_color_conv_coef();
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
-- 
cgit v1.2.3-70-g09d2


From 2c799cef4d145af2182594a41cb5e5b42f2535c5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 24 Feb 2012 10:34:35 -0800
Subject: ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and
 mach/hardware.h

This is needed to minimize io.h so the SoC specific io.h
for ARMs can removed.

Note that minimal driver changes for DSS and RNG are needed to
include cpu.h for SoC detection macros.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/clock.c                  |  3 +
 arch/arm/mach-omap1/clock_data.c             |  3 +
 arch/arm/mach-omap1/flash.c                  |  2 +
 arch/arm/mach-omap1/id.c                     |  2 +
 arch/arm/mach-omap1/include/mach/hardware.h  | 36 ++++++++++++
 arch/arm/mach-omap1/include/mach/io.h        | 43 +++++++++++++-
 arch/arm/mach-omap1/include/mach/memory.h    |  3 +-
 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c |  1 +
 arch/arm/mach-omap2/clkt_dpll.c              |  1 +
 arch/arm/mach-omap2/clock2420_data.c         |  2 +
 arch/arm/mach-omap2/clock2430.c              |  1 +
 arch/arm/mach-omap2/clock2430_data.c         |  1 +
 arch/arm/mach-omap2/clock2xxx.c              |  1 +
 arch/arm/mach-omap2/clock3xxx.c              |  1 +
 arch/arm/mach-omap2/common.h                 | 10 ++++
 arch/arm/mach-omap2/gpmc-nand.c              |  1 +
 arch/arm/mach-omap2/gpmc-onenand.c           |  1 +
 arch/arm/mach-omap2/include/mach/io.h        | 46 ++++++++++++++-
 arch/arm/mach-omap2/opp2420_data.c           |  2 +
 arch/arm/mach-omap2/opp2430_data.c           |  2 +
 arch/arm/mach-omap2/pm24xx.c                 |  2 -
 arch/arm/mach-omap2/sleep34xx.S              |  1 +
 arch/arm/plat-omap/counter_32k.c             |  1 +
 arch/arm/plat-omap/dma.c                     |  2 +
 arch/arm/plat-omap/dmtimer.c                 |  2 +
 arch/arm/plat-omap/include/plat/hardware.h   |  6 ++
 arch/arm/plat-omap/include/plat/io.h         | 84 ----------------------------
 arch/arm/plat-omap/include/plat/tc.h         | 19 -------
 arch/arm/plat-omap/mux.c                     |  5 +-
 arch/arm/plat-omap/usb.c                     |  4 ++
 drivers/char/hw_random/omap-rng.c            |  2 +
 drivers/video/omap2/dss/dss.c                |  3 +
 32 files changed, 184 insertions(+), 109 deletions(-)
 delete mode 100644 arch/arm/plat-omap/include/plat/io.h

(limited to 'drivers/video')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 0e8c176c54b..67382ddd8c8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
 
@@ -26,6 +27,8 @@
 #include <plat/sram.h>
 #include <plat/clkdev_omap.h>
 
+#include <mach/hardware.h>
+
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 10b74511a4e..c6ce93f71d0 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
@@ -27,6 +28,8 @@
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
 #include <plat/usb.h>   /* for OTG_BASE */
 
+#include <mach/hardware.h>
+
 #include "iomap.h"
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 98d29a0d3d6..f9bf78d4fdf 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -13,6 +13,8 @@
 #include <plat/tc.h>
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
 	static int count;
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 7483db29412..f24c1e2c504 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -18,6 +18,8 @@
 
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
 #define OMAP_PRODUCTION_ID_0	0xfffe2000
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index a3f6287b200..01e35fa106b 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -2,4 +2,40 @@
  * arch/arm/mach-omap1/include/mach/hardware.h
  */
 
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifndef __ASSEMBLER__
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <plat/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif
+#endif
+
 #include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
index 57bdf74a3e6..37b12e1fd02 100644
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -1,5 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
  */
 
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index c6337645ba8..901082def9b 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -18,7 +18,8 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP15XX
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <plat/cpu.h>
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 39f9d5a58d0..7072e0d651b 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,6 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 
+#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index e069a9be93d..cd7fd0f9114 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -22,6 +22,7 @@
 #include <asm/div64.h>
 
 #include <plat/clock.h>
+#include <plat/cpu.h>
 
 #include "clock.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index b1f3e7cebd1..bace9308a4d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -14,9 +14,11 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/list.h>
 
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index 0caf792ef5f..dfda9a3f2cb 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/hardware.h>
 #include <plat/clock.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 9a061ffdbd5..3b4d09a5039 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
+#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 80bb0f0e92e..12500097378 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/cpu.h>
 #include <plat/clock.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 952c3e01c9e..794d82702c8 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,6 +21,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <plat/hardware.h>
 #include <plat/clock.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index f78ec4e6a5c..09ca9e9cc17 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -242,5 +242,15 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 8ad210bda9a..386dec8d235 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -16,6 +16,7 @@
 
 #include <asm/mach/flash.h>
 
+#include <plat/cpu.h>
 #include <plat/nand.h>
 #include <plat/board.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 5cdce10d618..385b3e02c4a 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -18,6 +18,7 @@
 
 #include <asm/mach/flash.h>
 
+#include <plat/cpu.h>
 #include <plat/onenand.h>
 #include <plat/board.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
index fd78f31aa1a..b8758c8a939 100644
--- a/arch/arm/mach-omap2/include/mach/io.h
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -1,5 +1,49 @@
 /*
  * arch/arm/mach-omap2/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
  */
 
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index e6dda694fd5..5037e76e4e2 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -28,6 +28,8 @@
  *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
+#include <plat/hardware.h>
+
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 1b9596ae201..750805c528d 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -26,6 +26,8 @@
  * This is technically part of the OMAP2xxx clock code.
  */
 
+#include <plat/hardware.h>
+
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 423a9a957b8..7e367225d25 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
@@ -42,7 +41,6 @@
 
 #include <mach/irqs.h>
 
-#include "iomap.h"
 #include "common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index b760fec1053..1f62f23673f 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,6 +26,7 @@
 
 #include <asm/assembler.h>
 
+#include <plat/hardware.h>
 #include <plat/sram.h>
 
 #include "iomap.h"
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 5f0f2292b7f..5068fe5a691 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -21,6 +21,7 @@
 
 #include <asm/sched_clock.h>
 
+#include <plat/hardware.h>
 #include <plat/common.h>
 #include <plat/board.h>
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 002fb4d96bb..95c3ed693f6 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -164,6 +164,8 @@ static inline void set_gdma_dev(int req, int dev)
 }
 #else
 #define set_gdma_dev(req, dev)	do {} while (0)
+#define omap_readl(reg)		0
+#define omap_writel(val, reg)	do {} while (0)
 #endif
 
 void omap_set_dma_priority(int lch, int dst_port, int priority)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index af3b92be845..2678260d9fe 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -43,6 +43,8 @@
 
 #include <plat/dmtimer.h>
 
+#include <mach/hardware.h>
+
 static LIST_HEAD(omap_timer_list);
 static DEFINE_SPINLOCK(dm_timer_lock);
 
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index e897978371c..537b05ae1f5 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -43,6 +43,12 @@
 #endif
 #include <plat/serial.h>
 
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
 /*
  * ---------------------------------------------------------------------------
  * Common definitions for all OMAP processors
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
deleted file mode 100644
index 93261d9098f..00000000000
--- a/arch/arm/plat-omap/include/plat/io.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * Omap specific register access
- * ----------------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLER__
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index 83b850f5fc0..1b4b2da8620 100644
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
@@ -84,25 +84,6 @@
 #define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
 #define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
 
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-#ifdef CONFIG_ARCH_OMAP1
-static inline u32 omap_cs0m_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-#endif
-
 #endif	/* __ASSEMBLER__ */
 
 #endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 0d4aa0d5876..cff8712122b 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -26,8 +26,11 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/system.h>
 #include <linux/spinlock.h>
+
+#include <asm/system.h>
+
+#include <plat/cpu.h>
 #include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index f3570884883..d2bbfd1cb0b 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -29,6 +29,10 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "../mach-omap2/common.h"
+
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index b757fac3cd1..a07a5caa599 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -26,6 +26,8 @@
 
 #include <asm/io.h>
 
+#include <plat/cpu.h>
+
 #define RNG_OUT_REG		0x00		/* Output register */
 #define RNG_STAT_REG		0x04		/* Status register
 							[0] = STAT_BUSY */
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 77c2b5a32b5..e6af8759f7d 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -33,7 +33,10 @@
 #include <linux/pm_runtime.h>
 
 #include <video/omapdss.h>
+
+#include <plat/cpu.h>
 #include <plat/clock.h>
+
 #include "dss.h"
 #include "dss_features.h"
 
-- 
cgit v1.2.3-70-g09d2


From da564a05b3aefe403062411b67d64b7e992718f7 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Fri, 10 Feb 2012 17:48:43 +0100
Subject: ARM: OMAP1: ams-delta: clean up init data section assignments

The main purpose of this patch is to fix several section mismatch
warnings from the board file and a few board specific drivers,
introduced with recent Amstrad Delta patch series, some of them rising
up only when building with CONFIG_MODULES not set.

While being at it, section tagging of all init data found in the board
file have been revised and hopefully corrected and/or optimized.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c | 18 +++++++++---------
 drivers/input/serio/ams_delta_serio.c |  2 +-
 drivers/mtd/nand/ams-delta.c          |  2 +-
 drivers/video/omap/lcd_ams_delta.c    |  2 +-
 4 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 3c97e640054..ce50fe13726 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -150,7 +150,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
 	}
 };
 
-static struct omap_lcd_config ams_delta_lcd_config = {
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
@@ -167,7 +167,7 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = {
 #define LATCH1_GPIO_BASE	232
 #define LATCH1_NGPIO		8
 
-static struct resource latch1_resources[] __initconst = {
+static struct resource latch1_resources[] = {
 	[0] = {
 		.name	= "dat",
 		.start	= LATCH1_PHYS,
@@ -176,7 +176,7 @@ static struct resource latch1_resources[] __initconst = {
 	},
 };
 
-static struct bgpio_pdata latch1_pdata __initconst = {
+static struct bgpio_pdata latch1_pdata = {
 	.base	= LATCH1_GPIO_BASE,
 	.ngpio	= LATCH1_NGPIO,
 };
@@ -191,7 +191,7 @@ static struct platform_device latch1_gpio_device = {
 	},
 };
 
-static struct resource latch2_resources[] __initconst = {
+static struct resource latch2_resources[] = {
 	[0] = {
 		.name	= "dat",
 		.start	= LATCH2_PHYS,
@@ -200,7 +200,7 @@ static struct resource latch2_resources[] __initconst = {
 	},
 };
 
-static struct bgpio_pdata latch2_pdata __initconst = {
+static struct bgpio_pdata latch2_pdata = {
 	.base	= AMS_DELTA_LATCH2_GPIO_BASE,
 	.ngpio	= AMS_DELTA_LATCH2_NGPIO,
 };
@@ -215,7 +215,7 @@ static struct platform_device latch2_gpio_device = {
 	},
 };
 
-static struct gpio latch_gpios[] __initconst = {
+static const struct gpio latch_gpios[] __initconst = {
 	{
 		.gpio	= LATCH1_GPIO_BASE + 6,
 		.flags	= GPIOF_OUT_INIT_LOW,
@@ -322,7 +322,7 @@ static struct platform_device ams_delta_lcd_device = {
 	.id	= -1,
 };
 
-static struct gpio_led gpio_leds[] __initconst = {
+static const struct gpio_led gpio_leds[] __initconst = {
 	{
 		.name		 = "camera",
 		.gpio		 = LATCH1_GPIO_BASE + 0,
@@ -358,7 +358,7 @@ static struct gpio_led gpio_leds[] __initconst = {
 	},
 };
 
-static struct gpio_led_platform_data leds_pdata __initconst = {
+static const struct gpio_led_platform_data leds_pdata __initconst = {
 	.leds		= gpio_leds,
 	.num_leds	= ARRAY_SIZE(gpio_leds),
 };
@@ -415,7 +415,7 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 	&ams_delta_camera_device,
 };
 
-static struct platform_device *late_devices[] __initconst = {
+static struct platform_device *late_devices[] __initdata = {
 	&ams_delta_nand_device,
 	&ams_delta_lcd_device,
 };
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 0571e2ec358..bd5b10eeeb4 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -103,7 +103,7 @@ static void ams_delta_serio_close(struct serio *serio)
 	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
 }
 
-static struct gpio ams_delta_gpios[] __initconst_or_module = {
+static const struct gpio ams_delta_gpios[] __initconst_or_module = {
 	{
 		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
 		.flags	= GPIOF_DIR_IN,
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 85934dc8546..73416951f4c 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -145,7 +145,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd)
 	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
 }
 
-static struct gpio _mandatory_gpio[] __initconst_or_module = {
+static const struct gpio _mandatory_gpio[] = {
 	{
 		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
 		.flags	= GPIOF_OUT_INIT_HIGH,
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 0e71e2898b1..d3a31132722 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -99,7 +99,7 @@ static struct lcd_ops ams_delta_lcd_ops = {
 
 /* omapfb panel section */
 
-static struct gpio _gpios[] __initconst_or_module = {
+static const struct gpio _gpios[] = {
 	{
 		.gpio	= AMS_DELTA_GPIO_PIN_LCD_VBLEN,
 		.flags	= GPIOF_OUT_INIT_LOW,
-- 
cgit v1.2.3-70-g09d2


From 9daee73c81d21f9f07f236f106da5d93c40f7a92 Mon Sep 17 00:00:00 2001
From: Martin Decky <martin@desky.cz>
Date: Thu, 1 Mar 2012 16:31:11 -0800
Subject: udlfb: Improve debugging printouts with refresh rate

It is not very helpful to print a list of the same resolutions
without the refresh rate.

Signed-off-by: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/udlfb.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index a40c05ebbdc..04aea205f02 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1012,7 +1012,8 @@ static int dlfb_is_valid_mode(struct fb_videomode *mode,
 		return 0;
 	}
 
-	pr_info("%dx%d valid mode\n", mode->xres, mode->yres);
+	pr_info("%dx%d @ %d Hz valid mode\n", mode->xres, mode->yres,
+		mode->refresh);
 
 	return 1;
 }
-- 
cgit v1.2.3-70-g09d2


From 8d21547d3c9c3bc653261f26d554cfabc4a083de Mon Sep 17 00:00:00 2001
From: Bernie Thompson <bernie@plugable.com>
Date: Thu, 1 Mar 2012 17:35:48 -0800
Subject: udlfb: fix hcd_buffer_free panic on unplug/replug

Fix race conditions with unplug/replug behavior, in particular
take care not to hold up USB probe/disconnect for long-running
framebuffer operations and rely on usb to handle teardown.

Fix for kernel panic reported with new F17 multiseat support.

Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/udlfb.c | 146 +++++++++++++++++++++++++++-----------------------
 include/video/udlfb.h |   1 +
 2 files changed, 81 insertions(+), 66 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 04aea205f02..cbf030d0dfc 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -918,10 +918,6 @@ static void dlfb_free(struct kref *kref)
 {
 	struct dlfb_data *dev = container_of(kref, struct dlfb_data, kref);
 
-	/* this function will wait for all in-flight urbs to complete */
-	if (dev->urbs.count > 0)
-		dlfb_free_urb_list(dev);
-
 	if (dev->backing_buffer)
 		vfree(dev->backing_buffer);
 
@@ -940,35 +936,42 @@ static void dlfb_release_urb_work(struct work_struct *work)
 	up(&unode->dev->urbs.limit_sem);
 }
 
-static void dlfb_free_framebuffer_work(struct work_struct *work)
+static void dlfb_free_framebuffer(struct dlfb_data *dev)
 {
-	struct dlfb_data *dev = container_of(work, struct dlfb_data,
-					     free_framebuffer_work.work);
 	struct fb_info *info = dev->info;
-	int node = info->node;
 
-	unregister_framebuffer(info);
+	if (info) {
+		int node = info->node;
 
-	if (info->cmap.len != 0)
-		fb_dealloc_cmap(&info->cmap);
-	if (info->monspecs.modedb)
-		fb_destroy_modedb(info->monspecs.modedb);
-	if (info->screen_base)
-		vfree(info->screen_base);
+		unregister_framebuffer(info);
 
-	fb_destroy_modelist(&info->modelist);
+		if (info->cmap.len != 0)
+			fb_dealloc_cmap(&info->cmap);
+		if (info->monspecs.modedb)
+			fb_destroy_modedb(info->monspecs.modedb);
+		if (info->screen_base)
+			vfree(info->screen_base);
+
+		fb_destroy_modelist(&info->modelist);
 
-	dev->info = 0;
+		dev->info = NULL;
 
-	/* Assume info structure is freed after this point */
-	framebuffer_release(info);
+		/* Assume info structure is freed after this point */
+		framebuffer_release(info);
 
-	pr_warn("fb_info for /dev/fb%d has been freed\n", node);
+		pr_warn("fb_info for /dev/fb%d has been freed\n", node);
+	}
 
 	/* ref taken in probe() as part of registering framebfufer */
 	kref_put(&dev->kref, dlfb_free);
 }
 
+static void dlfb_free_framebuffer_work(struct work_struct *work)
+{
+	struct dlfb_data *dev = container_of(work, struct dlfb_data,
+					     free_framebuffer_work.work);
+	dlfb_free_framebuffer(dev);
+}
 /*
  * Assumes caller is holding info->lock mutex (for open and release at least)
  */
@@ -1571,14 +1574,15 @@ success:
 	kfree(buf);
 	return true;
 }
+
+static void dlfb_init_framebuffer_work(struct work_struct *work);
+
 static int dlfb_usb_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
 	struct usb_device *usbdev;
 	struct dlfb_data *dev = 0;
-	struct fb_info *info = 0;
 	int retval = -ENOMEM;
-	int i;
 
 	/* usb initialization */
 
@@ -1590,9 +1594,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	/* we need to wait for both usb and fbdev to spin down on disconnect */
 	kref_init(&dev->kref); /* matching kref_put in usb .disconnect fn */
-	kref_get(&dev->kref); /* matching kref_put in free_framebuffer_work */
 
 	dev->udev = usbdev;
 	dev->gdev = &usbdev->dev; /* our generic struct device * */
@@ -1620,10 +1622,39 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 		goto error;
 	}
 
+	kref_get(&dev->kref); /* matching kref_put in free_framebuffer_work */
+
 	/* We don't register a new USB class. Our client interface is fbdev */
 
+	/* Workitem keep things fast & simple during USB enumeration */
+	INIT_DELAYED_WORK(&dev->init_framebuffer_work,
+			  dlfb_init_framebuffer_work);
+	schedule_delayed_work(&dev->init_framebuffer_work, 0);
+
+	return 0;
+
+error:
+	if (dev) {
+
+		kref_put(&dev->kref, dlfb_free); /* ref for framebuffer */
+		kref_put(&dev->kref, dlfb_free); /* last ref from kref_init */
+
+		/* dev has been deallocated. Do not dereference */
+	}
+
+	return retval;
+}
+
+static void dlfb_init_framebuffer_work(struct work_struct *work)
+{
+	struct dlfb_data *dev = container_of(work, struct dlfb_data,
+					     init_framebuffer_work.work);
+	struct fb_info *info;
+	int retval;
+	int i;
+
 	/* allocates framebuffer driver structure, not framebuffer memory */
-	info = framebuffer_alloc(0, &interface->dev);
+	info = framebuffer_alloc(0, dev->gdev);
 	if (!info) {
 		retval = -ENOMEM;
 		pr_err("framebuffer_alloc failed\n");
@@ -1669,15 +1700,13 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++) {
 		retval = device_create_file(info->dev, &fb_device_attrs[i]);
 		if (retval) {
-			pr_err("device_create_file failed %d\n", retval);
-			goto err_del_attrs;
+			pr_warn("device_create_file failed %d\n", retval);
 		}
 	}
 
 	retval = device_create_bin_file(info->dev, &edid_attr);
 	if (retval) {
-		pr_err("device_create_bin_file failed %d\n", retval);
-		goto err_del_attrs;
+		pr_warn("device_create_bin_file failed %d\n", retval);
 	}
 
 	pr_info("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
@@ -1685,38 +1714,10 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 			info->var.xres, info->var.yres,
 			((dev->backing_buffer) ?
 			info->fix.smem_len * 2 : info->fix.smem_len) >> 10);
-	return 0;
-
-err_del_attrs:
-	for (i -= 1; i >= 0; i--)
-		device_remove_file(info->dev, &fb_device_attrs[i]);
+	return;
 
 error:
-	if (dev) {
-
-		if (info) {
-			if (info->cmap.len != 0)
-				fb_dealloc_cmap(&info->cmap);
-			if (info->monspecs.modedb)
-				fb_destroy_modedb(info->monspecs.modedb);
-			if (info->screen_base)
-				vfree(info->screen_base);
-
-			fb_destroy_modelist(&info->modelist);
-
-			framebuffer_release(info);
-		}
-
-		if (dev->backing_buffer)
-			vfree(dev->backing_buffer);
-
-		kref_put(&dev->kref, dlfb_free); /* ref for framebuffer */
-		kref_put(&dev->kref, dlfb_free); /* last ref from kref_init */
-
-		/* dev has been deallocated. Do not dereference */
-	}
-
-	return retval;
+	dlfb_free_framebuffer(dev);
 }
 
 static void dlfb_usb_disconnect(struct usb_interface *interface)
@@ -1736,12 +1737,24 @@ static void dlfb_usb_disconnect(struct usb_interface *interface)
 	/* When non-active we'll update virtual framebuffer, but no new urbs */
 	atomic_set(&dev->usb_active, 0);
 
-	/* remove udlfb's sysfs interfaces */
-	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
-		device_remove_file(info->dev, &fb_device_attrs[i]);
-	device_remove_bin_file(info->dev, &edid_attr);
-	unlink_framebuffer(info);
+	/* this function will wait for all in-flight urbs to complete */
+	dlfb_free_urb_list(dev);
+
+	if (info) {
+
+		/* remove udlfb's sysfs interfaces */
+		for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
+			device_remove_file(info->dev, &fb_device_attrs[i]);
+		device_remove_bin_file(info->dev, &edid_attr);
+
+		/* it's safe to uncomment next line if your kernel
+		   doesn't yet have this function exported */
+		unlink_framebuffer(info);
+	}
+
 	usb_set_intfdata(interface, NULL);
+	dev->udev = NULL;
+	dev->gdev = NULL;
 
 	/* if clients still have us open, will be freed on last close */
 	if (dev->fb_count == 0)
@@ -1807,12 +1820,12 @@ static void dlfb_free_urb_list(struct dlfb_data *dev)
 	int ret;
 	unsigned long flags;
 
-	pr_notice("Waiting for completes and freeing all render urbs\n");
+	pr_notice("Freeing all render urbs\n");
 
 	/* keep waiting and freeing, until we've got 'em all */
 	while (count--) {
 
-		/* Getting interrupted means a leak, but ok at shutdown*/
+		/* Getting interrupted means a leak, but ok at disconnect */
 		ret = down_interruptible(&dev->urbs.limit_sem);
 		if (ret)
 			break;
@@ -1834,6 +1847,7 @@ static void dlfb_free_urb_list(struct dlfb_data *dev)
 		kfree(node);
 	}
 
+	dev->urbs.count = 0;
 }
 
 static int dlfb_alloc_urb_list(struct dlfb_data *dev, int count, size_t size)
diff --git a/include/video/udlfb.h b/include/video/udlfb.h
index c41f308c963..f9466fa54ba 100644
--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -41,6 +41,7 @@ struct dlfb_data {
 	char *backing_buffer;
 	int fb_count;
 	bool virtualized; /* true when physical usb device not present */
+	struct delayed_work init_framebuffer_work;
 	struct delayed_work free_framebuffer_work;
 	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
 	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
-- 
cgit v1.2.3-70-g09d2


From b130d5c29544fe4cedafd35b112d27a06550d844 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Fri, 3 Feb 2012 14:29:23 +0900
Subject: ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX

This patch changes the ARCH name to "ARCH_S3C24XX" for Samsung
S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443,
and S3C2450 SoCs so that we can merge the mach-xxx directories
and plat-s3c24xx dir. to just one mach-s3c24xx for them.

I think this should be sent to upstream via samsung tree because
this touches many samsung stuff.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
[for the gadget part:]
Acked-by: Felipe Balbi <balbi@ti.com>
[for the framebuffer (video) part:]
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[For the watchdog-part:]
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/Kconfig                      | 23 +++++++++++------------
 arch/arm/Makefile                     |  2 +-
 arch/arm/boot/compressed/head.S       |  2 +-
 arch/arm/configs/mini2440_defconfig   |  2 +-
 arch/arm/configs/s3c2410_defconfig    |  2 +-
 arch/arm/configs/tct_hammer_defconfig |  2 +-
 arch/arm/mach-s3c2410/Kconfig         |  2 +-
 arch/arm/mach-s3c2412/Kconfig         |  4 ++--
 arch/arm/mach-s3c2416/Kconfig         |  2 +-
 arch/arm/mach-s3c2443/Kconfig         |  2 +-
 arch/arm/plat-s3c24xx/Kconfig         |  6 +++---
 arch/arm/plat-s3c24xx/Makefile        |  2 +-
 arch/arm/plat-samsung/Kconfig         |  4 ++--
 drivers/input/touchscreen/Kconfig     |  2 +-
 drivers/leds/Kconfig                  |  2 +-
 drivers/mmc/host/Kconfig              |  2 +-
 drivers/mtd/nand/Kconfig              |  2 +-
 drivers/rtc/Kconfig                   |  2 +-
 drivers/spi/Kconfig                   |  2 +-
 drivers/usb/Kconfig                   |  2 +-
 drivers/usb/gadget/Kconfig            |  4 ++--
 drivers/usb/host/ohci-hcd.c           |  2 +-
 drivers/video/Kconfig                 |  2 +-
 drivers/watchdog/Kconfig              |  2 +-
 sound/soc/samsung/Kconfig             | 12 ++++++------
 25 files changed, 45 insertions(+), 46 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0419e..5f1a3ad1316 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -763,22 +763,21 @@ config ARCH_SA1100
 	help
 	  Support for StrongARM 11x0 based boards.
 
-config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
+config ARCH_S3C24XX
+	bool "Samsung S3C24XX SoCs"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
-	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
-	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
-	  the Samsung SMDK2410 development board (and derivatives).
-
-	  Note, the S3C2416 and the S3C2450 are so close that they even share
-	  the same SoC ID code. This means that there is no separate machine
-	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
+	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
+	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
+	  Samsung SMDK2410 development board (and derivatives).
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
@@ -1068,7 +1067,7 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-if ARCH_S3C2410
+if ARCH_S3C24XX
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2416/Kconfig"
@@ -1590,7 +1589,7 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
+	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
@@ -2116,7 +2115,7 @@ config CPU_FREQ_S3C
 
 config CPU_FREQ_S3C24XX
 	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
 	select CPU_FREQ_S3C
 	help
 	  This enables the CPUfreq driver for the Samsung S3C24XX family
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d91bb7..624f76442ab 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -175,7 +175,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C24XX)		:= s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5d60250d43..5f6045f1766 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -58,7 +58,7 @@
 		add	\rb, \rb, #0x00010000	@ Ser1
 #endif
 		.endm
-#elif defined(CONFIG_ARCH_S3C2410)
+#elif defined(CONFIG_ARCH_S3C24XX)
 		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 2472a958583..42da9183acc 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f9096c1b0a6..8746c002a85 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -9,7 +9,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 95c0f0d63db..1d24f8458be 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -14,7 +14,7 @@ CONFIG_SLOB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C2410=y
+CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 5261a7ed099..ce620993bec 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2410
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index b8b9029e9f2..41f3327d676 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2412
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_PM if PM
@@ -14,7 +14,7 @@ config CPU_S3C2412
 
 config CPU_S3C2412_ONLY
 	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2410 && \
+	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
 		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 84c7b03e5a3..53d5c2bf543 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -9,7 +9,7 @@
 
 config CPU_S3C2416
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select S3C2416_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 8814031516c..793a0fe654b 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -4,7 +4,7 @@
 
 config CPU_S3C2443
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 6b1d9184e96..5a67eda57bb 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -4,7 +4,7 @@
 
 config PLAT_S3C24XX
 	bool
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
@@ -84,7 +84,7 @@ config PM_SIMTEC
 
 config S3C2410_DMA
 	bool "S3C2410 DMA support"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select S3C_DMA
 	help
 	  S3C2410 DMA support. This is needed for drivers like sound which
@@ -93,7 +93,7 @@ config S3C2410_DMA
 
 config S3C2410_DMA_DEBUG
 	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C2410 && S3C2410_DMA
+	depends on ARCH_S3C24XX && S3C2410_DMA
 	help
 	  Enable debugging output for the DMA code. This option sends info
 	  to the kernel log, at priority KERN_DEBUG.
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7cefd7f9d57..32bd295f9c8 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
+obj-$(CONFIG_ARCH_S3C24XX)	+= setup-i2c.o
 obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o
 
 # machine common support
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 6a2abe67c8b..71553f41001 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -205,7 +205,7 @@ config S3C_DEV_USB_HSOTG
 
 config S3C_DEV_WDT
 	bool
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	help
 	  Complie in platform device definition for Watchdog Timer
 
@@ -264,7 +264,7 @@ config SAMSUNG_DEV_KEYPAD
 
 config SAMSUNG_DEV_PWM
 	bool
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	help
 	  Compile in platform device definition for PWM Timer
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4af2a18eb3b..b3061684252 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -215,7 +215,7 @@ config TOUCHSCREEN_FUJITSU
 
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
-	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c957c344233..2ba64ca7e25 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -69,7 +69,7 @@ config LEDS_MIKROTIK_RB532
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 	depends on LEDS_CLASS
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This option enables support for LEDs connected to GPIO lines
 	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index cf444b0ca2c..f31f7cb164f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -395,7 +395,7 @@ config MMC_SPI
 
 config MMC_S3C
 	tristate "Samsung S3C SD/MMC Card Interface support"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This selects a driver for the MCI interface found in
           Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 31b034b7eba..92e8559394d 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -187,7 +187,7 @@ config MTD_NAND_PPCHAMELEONEVB
 
 config MTD_NAND_S3C2410
 	tristate "NAND Flash support for Samsung S3C SoCs"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C24XX || ARCH_S3C64XX
 	help
 	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index e19a4031f45..cb7df33d4eb 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -748,7 +748,7 @@ config HAVE_S3C_RTC
 
 config RTC_DRV_S3C
 	tristate "Samsung S3C series SoC RTC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
+	depends on ARCH_S3C64XX || HAVE_S3C_RTC
 	help
 	  RTC (Realtime Clock) driver for the clock inbuilt into the
 	  Samsung S3C24XX series of SoCs. This can provide periodic
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3f9a47ec67d..e980700a396 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -281,7 +281,7 @@ config SPI_PXA2XX_PCI
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
-	depends on ARCH_S3C2410 && EXPERIMENTAL
+	depends on ARCH_S3C24XX && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 75823a1abeb..5bf291353fe 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -37,7 +37,7 @@ config USB_ARCH_HAS_OHCI
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	default y if PXA27x
 	default y if PXA3xx
 	default y if ARCH_EP93XX
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a6741..43a11c1665b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -284,7 +284,7 @@ config USB_IMX
 
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  Samsung's S3C2410 is an ARM-4 processor with an integrated
 	  full speed USB 1.1 device controller.  It has 4 configurable
@@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG
 
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 34b9edd8665..f15e08fca68 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1000,7 +1000,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6ca0c407c14..64ad8cc886b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2061,7 +2061,7 @@ config FB_S3C_DEBUG_REGWRITE
 
 config FB_S3C2410
 	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C2410
+	depends on FB && ARCH_S3C24XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 877b107f77a..3aa52ba1398 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -170,7 +170,7 @@ config HAVE_S3C2410_WATCHDOG
 
 config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
-	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+	depends on HAVE_S3C2410_WATCHDOG
 	select WATCHDOG_CORE
 	help
 	  Watchdog timer block in the Samsung SoCs. This will reboot
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index f3417f2311b..fe3995ce9b3 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,8 +1,8 @@
 config SND_SOC_SAMSUNG
 	tristate "ASoC support for Samsung"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
+	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
 	select S3C64XX_DMA if ARCH_S3C64XX
-	select S3C2410_DMA if ARCH_S3C2410
+	select S3C2410_DMA if ARCH_S3C24XX
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the Samsung SoCs' Audio interfaces. You will also need to
@@ -84,7 +84,7 @@ config SND_SOC_SAMSUNG_SMDK2443_WM9710
 
 config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select S3C2410_DMA
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
@@ -95,7 +95,7 @@ config SND_SOC_SAMSUNG_LN2440SBC_ALC650
 
 config SND_SOC_SAMSUNG_S3C24XX_UDA134X
 	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_L3
 	select SND_SOC_UDA134X
@@ -107,14 +107,14 @@ config SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
 	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC23
 	select SND_SOC_SAMSUNG_SIMTEC
 
 config SND_SOC_SAMSUNG_SIMTEC_HERMES
 	tristate "SoC I2S Audio support for Simtec Hermes board"
-	depends on SND_SOC_SAMSUNG && ARCH_S3C2410
+	depends on SND_SOC_SAMSUNG && ARCH_S3C24XX
 	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC3X
 	select SND_SOC_SAMSUNG_SIMTEC
-- 
cgit v1.2.3-70-g09d2


From b49f184b640dcfab7ede394cf2a1ff4fe3d154f5 Mon Sep 17 00:00:00 2001
From: Ben Collins <bcollins@ubuntu.com>
Date: Sat, 3 Mar 2012 12:43:27 -0800
Subject: udlfb: Make sure to get correct endian keys from vendor descriptor

The driver was not using le16_to_cpu when reading keys from the vendor
descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not
being parsed on big-endian systems. This would result in a blank screen
on big-endian CPUs where the DL chips's max mode was smaller than the
monitor's native mode.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/udlfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index cbf030d0dfc..4330cf4b17a 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1541,7 +1541,7 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dev,
 			u8 length;
 			u16 key;
 
-			key = *((u16 *) desc);
+			key = le16_to_cpu(*((u16 *) desc));
 			desc += sizeof(u16);
 			length = *desc;
 			desc++;
-- 
cgit v1.2.3-70-g09d2


From 664c5f18490f2552900c3f1794602204a43acc86 Mon Sep 17 00:00:00 2001
From: Ben Collins <bcollins@ubuntu.com>
Date: Sat, 3 Mar 2012 12:57:37 -0800
Subject: udlfb: Add module_param to allow forcing pixel_limit

Some user scenarios need to prioritize performance over
maxiumum resolution.

Also, some devices may have bad vendor descriptors, and
this allows the user to set a pixel limit that matches
their specific device to avoid blank screens on higher
resolution monitors.

700000 minimum for DL-115, 2360000 maximum for DL-195

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
---
 drivers/video/udlfb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 4330cf4b17a..86c8b256e30 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -72,6 +72,7 @@ MODULE_DEVICE_TABLE(usb, id_table);
 static bool console = 1; /* Allow fbcon to open framebuffer */
 static bool fb_defio = 1;  /* Detect mmap writes using page faults */
 static bool shadow = 1; /* Optionally disable shadow framebuffer */
+static int pixel_limit; /* Optionally force a pixel resolution limit */
 
 /* dlfb keeps a list of urbs for efficient bulk transfers */
 static void dlfb_urb_completion(struct urb *urb);
@@ -1616,6 +1617,14 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 		goto error;
 	}
 
+	if (pixel_limit) {
+		pr_warn("DL chip limit of %d overriden"
+			" by module param to %d\n",
+			dev->sku_pixel_limit, pixel_limit);
+		dev->sku_pixel_limit = pixel_limit;
+	}
+
+
 	if (!dlfb_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
 		retval = -ENOMEM;
 		pr_err("dlfb_alloc_urb_list failed\n");
@@ -1963,6 +1972,9 @@ MODULE_PARM_DESC(fb_defio, "Page fault detection of mmap writes");
 module_param(shadow, bool, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
 MODULE_PARM_DESC(shadow, "Shadow vid mem. Disable to save mem but lose perf");
 
+module_param(pixel_limit, int, S_IWUSR | S_IRUSR | S_IWGRP | S_IRGRP);
+MODULE_PARM_DESC(pixel_limit, "Force limit on max mode (in x*y pixels)");
+
 MODULE_AUTHOR("Roberto De Ioris <roberto@unbit.it>, "
 	      "Jaya Kumar <jayakumar.lkml@gmail.com>, "
 	      "Bernie Thompson <bernie@plugable.com>");
-- 
cgit v1.2.3-70-g09d2


From 91dc1be8f698eb016343d534159a919678e3889c Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 12 Feb 2012 20:34:17 +0000
Subject: viafb: LCD bpp cleanup

This patch removes redundant bits per pixel information by using the
one storged in var directly. Simplifies code without any functional
changes.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/chip.h     |  1 -
 drivers/video/via/hw.c       | 16 ++--------------
 drivers/video/via/hw.h       |  2 +-
 drivers/video/via/lcd.c      | 21 ++++++++-------------
 drivers/video/via/viafbdev.c |  2 +-
 5 files changed, 12 insertions(+), 30 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index c2ecdb5a94d..d32a5076c20 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -146,7 +146,6 @@ struct tmds_setting_information {
 
 struct lvds_setting_information {
 	int iga_path;
-	int bpp;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
 	int display_method;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 4d799c89941..da80d202f52 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1529,9 +1529,6 @@ void viafb_update_device_setting(int hres, int vres, int bpp, int flag)
 	if (flag == 0) {
 		viaparinfo->tmds_setting_info->h_active = hres;
 		viaparinfo->tmds_setting_info->v_active = vres;
-
-		viaparinfo->lvds_setting_info->bpp = bpp;
-		viaparinfo->lvds_setting_info2->bpp = bpp;
 	} else {
 
 		if (viaparinfo->tmds_setting_info->iga_path == IGA2) {
@@ -1539,11 +1536,6 @@ void viafb_update_device_setting(int hres, int vres, int bpp, int flag)
 			viaparinfo->tmds_setting_info->v_active = vres;
 		}
 
-		if (viaparinfo->lvds_setting_info->iga_path == IGA2)
-			viaparinfo->lvds_setting_info->bpp = bpp;
-
-		if (IGA2 == viaparinfo->lvds_setting_info2->iga_path)
-			viaparinfo->lvds_setting_info2->bpp = bpp;
 	}
 }
 
@@ -1834,7 +1826,7 @@ static void hw_init(void)
 	load_fix_bit_crtc_reg();
 }
 
-int viafb_setmode(int video_bpp, int video_bpp1)
+int viafb_setmode(void)
 {
 	int j, cxres = 0, cyres = 0;
 	int port;
@@ -1923,7 +1915,6 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_LCD_ON) {
 		if (viafb_SAMM_ON &&
 			(viaparinfo->lvds_setting_info->iga_path == IGA2)) {
-			viaparinfo->lvds_setting_info->bpp = video_bpp1;
 			viafb_lcd_set_mode(&var2, cxres, cyres,
 				viaparinfo->lvds_setting_info,
 				&viaparinfo->chip_info->lvds_chip_info);
@@ -1933,7 +1924,6 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 				viaparinfo->lvds_setting_info->display_method =
 				    LCD_CENTERING;
 			}
-			viaparinfo->lvds_setting_info->bpp = video_bpp;
 			viafb_lcd_set_mode(&viafbinfo->var, 0, 0,
 				viaparinfo->lvds_setting_info,
 				&viaparinfo->chip_info->lvds_chip_info);
@@ -1942,7 +1932,6 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (viafb_LCD2_ON) {
 		if (viafb_SAMM_ON &&
 			(viaparinfo->lvds_setting_info2->iga_path == IGA2)) {
-			viaparinfo->lvds_setting_info2->bpp = video_bpp1;
 			viafb_lcd_set_mode(&var2, cxres, cyres,
 				viaparinfo->lvds_setting_info2,
 				&viaparinfo->chip_info->lvds_chip_info2);
@@ -1952,7 +1941,6 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 				viaparinfo->lvds_setting_info2->display_method =
 				    LCD_CENTERING;
 			}
-			viaparinfo->lvds_setting_info2->bpp = video_bpp;
 			viafb_lcd_set_mode(&viafbinfo->var, 0, 0,
 				viaparinfo->lvds_setting_info2,
 				&viaparinfo->chip_info->lvds_chip_info2);
@@ -1967,7 +1955,7 @@ int viafb_setmode(int video_bpp, int video_bpp1)
 	if (!viafb_hotplug) {
 		viafb_hotplug_Xres = viafbinfo->var.xres;
 		viafb_hotplug_Yres = viafbinfo->var.yres;
-		viafb_hotplug_bpp = video_bpp;
+		viafb_hotplug_bpp = viafbinfo->var.bits_per_pixel;
 		viafb_hotplug_refresh = viafb_refresh;
 
 		if (viafb_DVI_ON)
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index f8129e49aa2..cacedc10699 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -658,7 +658,7 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting);
 
-int viafb_setmode(int video_bpp, int video_bpp1);
+int viafb_setmode(void);
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
 	struct crt_mode_table *mode);
 void __devinit viafb_init_chip_info(int chip_type);
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 02cfdc8d7ed..6e52711e963 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -53,9 +53,6 @@ static void __devinit fp_id_to_vindex(int panel_id);
 static int lvds_register_read(int index);
 static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		      int panel_vres);
-static void via_pitch_alignment_patch_lcd(
-	struct lvds_setting_information *plvds_setting_info,
-	struct lvds_chip_information *plvds_chip_info, int hres);
 static void lcd_patch_skew_dvp0(struct lvds_setting_information
 			 *plvds_setting_info,
 			 struct lvds_chip_information *plvds_chip_info);
@@ -453,19 +450,17 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	}
 }
 
-static void via_pitch_alignment_patch_lcd(
-	struct lvds_setting_information *plvds_setting_info,
-	struct lvds_chip_information *plvds_chip_info, int hres)
+static void via_pitch_alignment_patch_lcd(int iga_path, int hres, int bpp)
 {
 	unsigned char cr13, cr35, cr65, cr66, cr67;
 	unsigned long dwScreenPitch = 0;
 	unsigned long dwPitch;
 
-	dwPitch = hres * (plvds_setting_info->bpp >> 3);
+	dwPitch = hres * (bpp >> 3);
 	if (dwPitch & 0x1F) {
 		dwScreenPitch = ((dwPitch + 31) & ~31) >> 3;
-		if (plvds_setting_info->iga_path == IGA2) {
-			if (plvds_setting_info->bpp > 8) {
+		if (iga_path == IGA2) {
+			if (bpp > 8) {
 				cr66 = (unsigned char)(dwScreenPitch & 0xFF);
 				viafb_write_reg(CR66, VIACR, cr66);
 				cr67 = viafb_read_reg(VIACR, CR67) & 0xFC;
@@ -483,7 +478,7 @@ static void via_pitch_alignment_patch_lcd(
 			cr65 += 2;
 			viafb_write_reg(CR65, VIACR, cr65);
 		} else {
-			if (plvds_setting_info->bpp > 8) {
+			if (bpp > 8) {
 				cr13 = (unsigned char)(dwScreenPitch & 0xFF);
 				viafb_write_reg(CR13, VIACR, cr13);
 				cr35 = viafb_read_reg(VIACR, CR35) & 0x1F;
@@ -551,7 +546,7 @@ void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
 	struct lvds_chip_information *plvds_chip_info)
 {
 	int set_iga = plvds_setting_info->iga_path;
-	int mode_bpp = plvds_setting_info->bpp;
+	int mode_bpp = var->bits_per_pixel;
 	int set_hres = cxres ? cxres : var->xres;
 	int set_vres = cyres ? cyres : var->yres;
 	int panel_hres = plvds_setting_info->lcd_panel_hres;
@@ -612,8 +607,8 @@ void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
 		viafb_write_reg_mask(CR6A, VIACR, 0x01, BIT0);
 
 	/* Patch for non 32bit alignment mode */
-	via_pitch_alignment_patch_lcd(plvds_setting_info, plvds_chip_info,
-		set_hres);
+	via_pitch_alignment_patch_lcd(plvds_setting_info->iga_path, set_hres,
+		var->bits_per_pixel);
 }
 
 static void integrated_lvds_disable(struct lvds_setting_information
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 9cfa92ef6bd..7529340f4ea 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -303,7 +303,7 @@ static int viafb_set_par(struct fb_info *info)
 			info->flags &= ~FBINFO_HWACCEL_DISABLED;
 		else
 			info->flags |= FBINFO_HWACCEL_DISABLED;
-		viafb_setmode(info->var.bits_per_pixel, viafb_bpp1);
+		viafb_setmode();
 		viafb_pan_display(&info->var, info);
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 23f1365677a84f775d374a1d8ca0360257685894 Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Sun, 26 Feb 2012 16:52:02 +0300
Subject: pxafb: do console locking before calling fb_blank()

Otherwise we hit WARN_CONSOLE_UNLOCKED in do_unblank_screen

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/pxafb.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 1d1e4f175e7..c176561a222 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -54,6 +54,7 @@
 #include <linux/mutex.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/console.h>
 
 #include <mach/hardware.h>
 #include <asm/io.h>
@@ -730,9 +731,12 @@ static int overlayfb_open(struct fb_info *info, int user)
 	if (user == 0)
 		return -ENODEV;
 
-	if (ofb->usage++ == 0)
+	if (ofb->usage++ == 0) {
 		/* unblank the base framebuffer */
+		console_lock();
 		fb_blank(&ofb->fbi->fb, FB_BLANK_UNBLANK);
+		console_unlock();
+	}
 
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From 5c44778eb0b8928aabfe039ba6f11ca88be6d650 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Tue, 6 Mar 2012 15:53:41 +0900
Subject: video: s3c-fb: Add support EXYNOS5 FIMD

This patch adds s3c_fb_driverdata s3c_fb_data_exynos5 for EXYNOS5
and adds extended timing control setting.

EXYNOS5 FIMD needs extended setting for video timing control.
Additional bits are added to VIDTCON2, VIDWxxADD2, VIDOSDxA and
VIDOSDxB registers in order to set timing value for lager resolution.

Also, address offset of VIDTCONx registers is changed from 0x0
to 0x20000, thus variable type should be changed to int type
to handle the address offset of VIDTCONx registers for EXYNOS5 FIMD.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 arch/arm/plat-samsung/include/plat/regs-fb.h | 24 ++++++++-----
 drivers/video/s3c-fb.c                       | 52 +++++++++++++++++++++++++---
 2 files changed, 63 insertions(+), 13 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index bbb16e0aa1f..9a78012d6f4 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -167,15 +167,17 @@
 #define VIDTCON1_HSPW(_x)			((_x) << 0)
 
 #define VIDTCON2				(0x18)
+#define VIDTCON2_LINEVAL_E(_x)			((((_x) & 0x800) >> 11) << 23)
 #define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
 #define VIDTCON2_LINEVAL_SHIFT			(11)
 #define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
-#define VIDTCON2_LINEVAL(_x)			((_x) << 11)
+#define VIDTCON2_LINEVAL(_x)			(((_x) & 0x7ff) << 11)
 
+#define VIDTCON2_HOZVAL_E(_x)			((((_x) & 0x800) >> 11) << 22)
 #define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
 #define VIDTCON2_HOZVAL_SHIFT			(0)
 #define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
-#define VIDTCON2_HOZVAL(_x)			((_x) << 0)
+#define VIDTCON2_HOZVAL(_x)			(((_x) & 0x7ff) << 0)
 
 /* WINCONx */
 
@@ -231,25 +233,29 @@
 /* Local input channels (windows 0-2) */
 #define SHADOWCON_CHx_LOCAL_ENABLE(_win)	(1 << (5 + (_win)))
 
+#define VIDOSDxA_TOPLEFT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
 #define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
 #define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
 #define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_X(_x)			((_x) << 11)
+#define VIDOSDxA_TOPLEFT_X(_x)			(((_x) & 0x7ff) << 11)
 
+#define VIDOSDxA_TOPLEFT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
 #define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
 #define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
 #define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_Y(_x)			((_x) << 0)
+#define VIDOSDxA_TOPLEFT_Y(_x)			(((_x) & 0x7ff) << 0)
 
+#define VIDOSDxB_BOTRIGHT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
 #define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
 #define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
 #define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_X(_x)			((_x) << 11)
+#define VIDOSDxB_BOTRIGHT_X(_x)			(((_x) & 0x7ff) << 11)
 
+#define VIDOSDxB_BOTRIGHT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
 #define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
 #define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
 #define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_Y(_x)			((_x) << 0)
+#define VIDOSDxB_BOTRIGHT_Y(_x)			(((_x) & 0x7ff) << 0)
 
 /* For VIDOSD[1..4]C */
 #define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
@@ -281,15 +287,17 @@
 #define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
 #define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
 
+#define VIDW_BUF_SIZE_OFFSET_E(_x)		((((_x) & 0x2000) >> 13) << 27)
 #define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
 #define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
 #define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_OFFSET(_x)		((_x) << 13)
+#define VIDW_BUF_SIZE_OFFSET(_x)		(((_x) & 0x1fff) << 13)
 
+#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x)		((((_x) & 0x2000) >> 13) << 26)
 #define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
 #define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
 #define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		((_x) << 0)
+#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		(((_x) & 0x1fff) << 0)
 
 /* Interrupt controls and status */
 
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 1fb7ddf8fb5..f3105160bf9 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -89,7 +89,7 @@ struct s3c_fb;
 struct s3c_fb_variant {
 	unsigned int	is_2443:1;
 	unsigned short	nr_windows;
-	unsigned short	vidtcon;
+	unsigned int	vidtcon;
 	unsigned short	wincon;
 	unsigned short	winmap;
 	unsigned short	keycon;
@@ -568,7 +568,9 @@ static int s3c_fb_set_par(struct fb_info *info)
 		writel(data, regs + sfb->variant.vidtcon + 4);
 
 		data = VIDTCON2_LINEVAL(var->yres - 1) |
-		       VIDTCON2_HOZVAL(var->xres - 1);
+		       VIDTCON2_HOZVAL(var->xres - 1) |
+		       VIDTCON2_LINEVAL_E(var->yres - 1) |
+		       VIDTCON2_HOZVAL_E(var->xres - 1);
 		writel(data, regs + sfb->variant.vidtcon + 8);
 	}
 
@@ -584,17 +586,23 @@ static int s3c_fb_set_par(struct fb_info *info)
 
 	pagewidth = (var->xres * var->bits_per_pixel) >> 3;
 	data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
-	       VIDW_BUF_SIZE_PAGEWIDTH(pagewidth);
+	       VIDW_BUF_SIZE_PAGEWIDTH(pagewidth) |
+	       VIDW_BUF_SIZE_OFFSET_E(info->fix.line_length - pagewidth) |
+	       VIDW_BUF_SIZE_PAGEWIDTH_E(pagewidth);
 	writel(data, regs + sfb->variant.buf_size + (win_no * 4));
 
 	/* write 'OSD' registers to control position of framebuffer */
 
-	data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0);
+	data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0) |
+	       VIDOSDxA_TOPLEFT_X_E(0) | VIDOSDxA_TOPLEFT_Y_E(0);
 	writel(data, regs + VIDOSD_A(win_no, sfb->variant));
 
 	data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
 						     var->xres - 1)) |
-	       VIDOSDxB_BOTRIGHT_Y(var->yres - 1);
+	       VIDOSDxB_BOTRIGHT_Y(var->yres - 1) |
+	       VIDOSDxB_BOTRIGHT_X_E(s3c_fb_align_word(var->bits_per_pixel,
+						     var->xres - 1)) |
+	       VIDOSDxB_BOTRIGHT_Y_E(var->yres - 1);
 
 	writel(data, regs + VIDOSD_B(win_no, sfb->variant));
 
@@ -1903,6 +1911,37 @@ static struct s3c_fb_driverdata s3c_fb_data_exynos4 = {
 	.win[4]	= &s3c_fb_data_s5p_wins[4],
 };
 
+static struct s3c_fb_driverdata s3c_fb_data_exynos5 = {
+	.variant = {
+		.nr_windows	= 5,
+		.vidtcon	= VIDTCON0,
+		.wincon		= WINCON(0),
+		.winmap		= WINxMAP(0),
+		.keycon		= WKEYCON,
+		.osd		= VIDOSD_BASE,
+		.osd_stride	= 16,
+		.buf_start	= VIDW_BUF_START(0),
+		.buf_size	= VIDW_BUF_SIZE(0),
+		.buf_end	= VIDW_BUF_END(0),
+
+		.palette = {
+			[0] = 0x2400,
+			[1] = 0x2800,
+			[2] = 0x2c00,
+			[3] = 0x3000,
+			[4] = 0x3400,
+		},
+		.has_shadowcon	= 1,
+		.has_blendcon	= 1,
+		.has_fixvclk	= 1,
+	},
+	.win[0]	= &s3c_fb_data_s5p_wins[0],
+	.win[1]	= &s3c_fb_data_s5p_wins[1],
+	.win[2]	= &s3c_fb_data_s5p_wins[2],
+	.win[3]	= &s3c_fb_data_s5p_wins[3],
+	.win[4]	= &s3c_fb_data_s5p_wins[4],
+};
+
 /* S3C2443/S3C2416 style hardware */
 static struct s3c_fb_driverdata s3c_fb_data_s3c2443 = {
 	.variant = {
@@ -1980,6 +2019,9 @@ static struct platform_device_id s3c_fb_driver_ids[] = {
 	}, {
 		.name		= "exynos4-fb",
 		.driver_data	= (unsigned long)&s3c_fb_data_exynos4,
+	}, {
+		.name		= "exynos5-fb",
+		.driver_data	= (unsigned long)&s3c_fb_data_exynos5,
 	}, {
 		.name		= "s3c2443-fb",
 		.driver_data	= (unsigned long)&s3c_fb_data_s3c2443,
-- 
cgit v1.2.3-70-g09d2


From dd2116a35aa9a5a7b71e1d21f30aec8927434d19 Mon Sep 17 00:00:00 2001
From: Mythri P K <mythripk@ti.com>
Date: Tue, 21 Feb 2012 12:10:58 +0530
Subject: OMAPDSS: HDMI: Add M2 divider while calculating clkout

While calculating regm and regmf value add using M2 divider in
the equation.
Formula for calculating:
Output clock on digital core domain:
	CLKOUT = (M / (N+1))*CLKINP*(1/M2)
Internal oscillator output clock on internal LDO domain:
	CLKDCOLDO = (M / (N+1))*CLKINP
The current code when allows variable M2 values as input
ignores using M2 divider values in calculation of regm and regmf.
so fix it by using M2 in calculation although the default value for
M2 is 1.

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a229d0f8365..c4b4f6950a9 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -278,24 +278,24 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
 
 	refclk = clkin / pi->regn;
 
-	/*
-	 * multiplier is pixel_clk/ref_clk
-	 * Multiplying by 100 to avoid fractional part removal
-	 */
-	pi->regm = (phy * 100 / (refclk)) / 100;
-
 	if (dssdev->clocks.hdmi.regm2 == 0)
 		pi->regm2 = HDMI_DEFAULT_REGM2;
 	else
 		pi->regm2 = dssdev->clocks.hdmi.regm2;
 
+	/*
+	 * multiplier is pixel_clk/ref_clk
+	 * Multiplying by 100 to avoid fractional part removal
+	 */
+	pi->regm = phy * pi->regm2 / refclk;
+
 	/*
 	 * fractional multiplier is remainder of the difference between
 	 * multiplier and actual phy(required pixel clock thus should be
 	 * multiplied by 2^18(262144) divided by the reference clock
 	 */
-	mf = (phy - pi->regm * refclk) * 262144;
-	pi->regmf = mf / (refclk);
+	mf = (phy - pi->regm / pi->regm2 * refclk) * 262144;
+	pi->regmf = pi->regm2 * mf / refclk;
 
 	/*
 	 * Dcofreq should be set to 1 if required pixel clock
-- 
cgit v1.2.3-70-g09d2


From 08f3267e264e3cf05f0e79cf0f63a2162fd4bd1c Mon Sep 17 00:00:00 2001
From: Lajos Molnar <lajos@ti.com>
Date: Tue, 21 Feb 2012 19:36:30 +0530
Subject: OMAPDSS: DISPC: Fix OMAP4 supported color formats

Add missing but supported color formats for GFX pipeline in dss features:
RGBX16-4444, RGBA16-4444 and XRGB16-1555.

In dispc_ovl_set_color_mode():

- Remove unsupported modes on GFX pipeline: YUV2 and UYVY. Replace these by
  missing modes supported by GFX pipelines: RGBX16-4444 and RGBA16-4444.

- Fix swapped modes on VID pipelines: RGBX16-4444 and XRGB16-4444.

Signed-off-by: Lajos Molnar <lajos@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 8 ++++----
 drivers/video/omap2/dss/dss_features.c | 3 ++-
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 700bb563cfc..bddd64b435b 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -735,11 +735,11 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane,
 		switch (color_mode) {
 		case OMAP_DSS_COLOR_NV12:
 			m = 0x0; break;
-		case OMAP_DSS_COLOR_RGB12U:
+		case OMAP_DSS_COLOR_RGBX16:
 			m = 0x1; break;
 		case OMAP_DSS_COLOR_RGBA16:
 			m = 0x2; break;
-		case OMAP_DSS_COLOR_RGBX16:
+		case OMAP_DSS_COLOR_RGB12U:
 			m = 0x4; break;
 		case OMAP_DSS_COLOR_ARGB16:
 			m = 0x5; break;
@@ -788,9 +788,9 @@ static void dispc_ovl_set_color_mode(enum omap_plane plane,
 			m = 0x8; break;
 		case OMAP_DSS_COLOR_RGB24P:
 			m = 0x9; break;
-		case OMAP_DSS_COLOR_YUV2:
+		case OMAP_DSS_COLOR_RGBX16:
 			m = 0xa; break;
-		case OMAP_DSS_COLOR_UYVY:
+		case OMAP_DSS_COLOR_RGBA16:
 			m = 0xb; break;
 		case OMAP_DSS_COLOR_ARGB32:
 			m = 0xc; break;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 0a926432ccd..ce14aa6dd67 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -190,7 +190,8 @@ static const enum omap_color_mode omap4_dss_supported_color_modes[] = {
 	OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
 	OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
 	OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
-	OMAP_DSS_COLOR_ARGB16_1555,
+	OMAP_DSS_COLOR_ARGB16_1555 | OMAP_DSS_COLOR_RGBX16 |
+	OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_XRGB16_1555,
 
 	/* OMAP_DSS_VIDEO1 */
 	OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
-- 
cgit v1.2.3-70-g09d2


From c0c1cfcb577d61ec55e209bc5f869d3d80a8f371 Mon Sep 17 00:00:00 2001
From: Lajos Molnar <lajos@ti.com>
Date: Tue, 21 Feb 2012 19:36:31 +0530
Subject: OMAPDSS: DISPC: Fix FIR coefficients

coef3_M8 had an incorrect phase with 50% more intensity. This resulted in
banding on slightly down/upscaled images. Fixed a rounding error in coef5_M9.

Also removed ARRAY_LEN macro as ARRAY_SIZE is the standard linux one.

Signed-off-by: Lajos Molnar <lajos@ti.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc_coefs.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc_coefs.c b/drivers/video/omap2/dss/dispc_coefs.c
index 069bccbb3f1..038c15b0421 100644
--- a/drivers/video/omap2/dss/dispc_coefs.c
+++ b/drivers/video/omap2/dss/dispc_coefs.c
@@ -19,14 +19,13 @@
 
 #include <linux/kernel.h>
 #include <video/omapdss.h>
-#include "dispc.h"
 
-#define ARRAY_LEN(array) (sizeof(array) / sizeof(array[0]))
+#include "dispc.h"
 
 static const struct dispc_coef coef3_M8[8] = {
 	{ 0,  0, 128,  0, 0 },
 	{ 0, -4, 123,  9, 0 },
-	{ 0, -4, 108, 87, 0 },
+	{ 0, -4, 108, 24, 0 },
 	{ 0, -2,  87, 43, 0 },
 	{ 0, 64,  64,  0, 0 },
 	{ 0, 43,  87, -2, 0 },
@@ -168,7 +167,7 @@ static const struct dispc_coef coef5_M8[8] = {
 
 static const struct dispc_coef coef5_M9[8] = {
 	{  -3,  10, 114,  10,  -3 },
-	{  -6,  24, 110,   0,  -1 },
+	{  -6,  24, 111,   0,  -1 },
 	{  -8,  40, 103,  -7,   0 },
 	{ -11,  58,  91, -11,   1 },
 	{   0, -12,  76,  76, -12 },
@@ -319,7 +318,7 @@ const struct dispc_coef *dispc_ovl_get_scale_coef(int inc, int five_taps)
 	};
 
 	inc /= 128;
-	for (i = 0; i < ARRAY_LEN(coefs); ++i)
+	for (i = 0; i < ARRAY_SIZE(coefs); ++i)
 		if (inc >= coefs[i].Mmin && inc <= coefs[i].Mmax)
 			return five_taps ? coefs[i].coef_5 : coefs[i].coef_3;
 	return NULL;
-- 
cgit v1.2.3-70-g09d2


From 21e56f79abad987555351c73569fc8358636b0fa Mon Sep 17 00:00:00 2001
From: Lajos Molnar <lajos@ti.com>
Date: Wed, 22 Feb 2012 12:23:16 +0530
Subject: OMAPDSS: MANAGER/APPLY: Add runtime_pm protection around
 wait_for_go/vsync functions

If DSS suspends within the functions dss_mgr_wait_for_go(),
dss_mgr_wait_for_go_ovl() or dss_mgr_wait_for_vsync(). It may lose it's clock
and lead to a register access failure.

Request runtime_pm around these functions.

[archit@ti.com: Moved runtime_pm calls to wait_for_go/vsync functions rather
then calling them from omap_dispc_wait_for_irq_interruptible_timeout()]

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c   | 12 ++++++++++++
 drivers/video/omap2/dss/manager.c | 12 +++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index b0264a16465..f145e9cd6ed 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -391,6 +391,10 @@ int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 	if (mgr_manual_update(mgr))
 		return 0;
 
+	r = dispc_runtime_get();
+	if (r)
+		return r;
+
 	irq = dispc_mgr_get_vsync_irq(mgr->id);
 
 	mp = get_mgr_priv(mgr);
@@ -431,6 +435,8 @@ int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 		}
 	}
 
+	dispc_runtime_put();
+
 	return r;
 }
 
@@ -454,6 +460,10 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	if (ovl_manual_update(ovl))
 		return 0;
 
+	r = dispc_runtime_get();
+	if (r)
+		return r;
+
 	irq = dispc_mgr_get_vsync_irq(ovl->manager->id);
 
 	op = get_ovl_priv(ovl);
@@ -494,6 +504,8 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 		}
 	}
 
+	dispc_runtime_put();
+
 	return r;
 }
 
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index d1858e71c64..e7364603f6a 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -494,6 +494,11 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
 	u32 irq;
+	int r;
+
+	r = dispc_runtime_get();
+	if (r)
+		return r;
 
 	if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
 		irq = DISPC_IRQ_EVSYNC_ODD;
@@ -505,7 +510,12 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 		else
 			irq = DISPC_IRQ_VSYNC2;
 	}
-	return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+
+	r = omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
+
+	dispc_runtime_put();
+
+	return r;
 }
 
 int dss_init_overlay_managers(struct platform_device *pdev)
-- 
cgit v1.2.3-70-g09d2


From 4614679c9d3b77e87b390b6afe8a8dfc980f4387 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 23 Feb 2012 12:21:09 +0200
Subject: OMAPDSS: APPLY: print warning if wait_pending_extra_info_updates
 fails

wait_pending_extra_info_updates() currently does a hacky second check
for extra_info_update_ongoing() at the end of the function to show a
warning if extra_info update is still ongoing. The call to
extra_info_update_ongoing() should really be inside spinlock, but that's
a bit heavy just for verification.

Rather than that, check the return value of the
wait_for_completion_timeout() and print an error if it has timeouted or
returned an error.

Even better would be to return the error value and act on it in the
callers of wait_pending_extra_info_updates. However, it's not clear what
the callers should do in case of an error, as the error should only
happen if there's a bug in the driver or the HW. So we'll just print the
warning for now.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index f145e9cd6ed..267c3f40d6c 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -354,6 +354,7 @@ static void wait_pending_extra_info_updates(void)
 	bool updating;
 	unsigned long flags;
 	unsigned long t;
+	int r;
 
 	spin_lock_irqsave(&data_lock, flags);
 
@@ -369,11 +370,11 @@ static void wait_pending_extra_info_updates(void)
 	spin_unlock_irqrestore(&data_lock, flags);
 
 	t = msecs_to_jiffies(500);
-	wait_for_completion_timeout(&extra_updated_completion, t);
-
-	updating = extra_info_update_ongoing();
-
-	WARN_ON(updating);
+	r = wait_for_completion_timeout(&extra_updated_completion, t);
+	if (r == 0)
+		DSSWARN("timeout in wait_pending_extra_info_updates\n");
+	else if (r < 0)
+		DSSERR("wait_pending_extra_info_updates failed: %d\n", r);
 }
 
 int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
-- 
cgit v1.2.3-70-g09d2


From 1efc15812d8ce5d9096bb8af400f51a85b5f5af0 Mon Sep 17 00:00:00 2001
From: "Jett.Zhou" <jtzhou@marvell.com>
Date: Tue, 28 Feb 2012 10:59:08 +0800
Subject: backlight: Modified power control of pm860x backlight

Since several sub modules such as backlight, leds and vibrator depend
on the refernce group and internal oscillator in pm8606, so modified
the power control of backlight in pm8606 by unified interface.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/video/backlight/88pm860x_bl.c | 49 ++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 21 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index a1376dc73d7..b6ea65f83eb 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -67,6 +67,28 @@ static inline int wled_idc(int port)
 	return ret;
 }
 
+static int backlight_power_set(struct pm860x_chip *chip, int port,
+		int on)
+{
+	int ret = -EINVAL;
+
+	switch (port) {
+	case PM8606_BACKLIGHT1:
+		ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) :
+			pm8606_osc_disable(chip, WLED1_DUTY);
+		break;
+	case PM8606_BACKLIGHT2:
+		ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) :
+			pm8606_osc_disable(chip, WLED2_DUTY);
+		break;
+	case PM8606_BACKLIGHT3:
+		ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) :
+			pm8606_osc_disable(chip, WLED3_DUTY);
+		break;
+	}
+	return ret;
+}
+
 static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 {
 	struct pm860x_backlight_data *data = bl_get_data(bl);
@@ -79,6 +101,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 	else
 		value = brightness;
 
+	if (brightness)
+		backlight_power_set(chip, data->port, 1);
+
 	ret = pm860x_reg_write(data->i2c, wled_a(data->port), value);
 	if (ret < 0)
 		goto out;
@@ -115,6 +140,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
 	if (ret < 0)
 		goto out;
 
+	if (brightness == 0)
+		backlight_power_set(chip, data->port, 0);
+
 	dev_dbg(chip->dev, "set brightness %d\n", value);
 	data->current_brightness = value;
 	return 0;
@@ -170,7 +198,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	struct backlight_device *bl;
 	struct resource *res;
 	struct backlight_properties props;
-	unsigned char value;
 	char name[MFD_NAME_SIZE];
 	int ret;
 
@@ -218,26 +245,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bl);
 
-	/* Enable reference VSYS */
-	ret = pm860x_reg_read(data->i2c, PM8606_VSYS);
-	if (ret < 0)
-		goto out;
-	if ((ret & PM8606_VSYS_EN) == 0) {
-		value = ret | PM8606_VSYS_EN;
-		ret = pm860x_reg_write(data->i2c, PM8606_VSYS, value);
-		if (ret < 0)
-			goto out;
-	}
-	/* Enable reference OSC */
-	ret = pm860x_reg_read(data->i2c, PM8606_MISC);
-	if (ret < 0)
-		goto out;
-	if ((ret & PM8606_MISC_OSC_EN) == 0) {
-		value = ret | PM8606_MISC_OSC_EN;
-		ret = pm860x_reg_write(data->i2c, PM8606_MISC, value);
-		if (ret < 0)
-			goto out;
-	}
 	/* read current backlight */
 	ret = pm860x_backlight_get_brightness(bl);
 	if (ret < 0)
-- 
cgit v1.2.3-70-g09d2


From 6076c644126e5424f32aec6c8f2bdc19bbcc8859 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 1 Mar 2012 08:35:01 -0600
Subject: ARM: OMAP: Remove remaining includes for mach/io.h

These are no longer needed with the recent iomap.h
changes.

Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 arch/arm/mach-omap1/include/mach/entry-macro.S | 1 -
 arch/arm/mach-omap1/sleep.S                    | 2 --
 arch/arm/mach-omap1/sram.S                     | 1 -
 arch/arm/plat-omap/include/plat/sdrc.h         | 1 -
 drivers/video/omap2/vrfb.c                     | 1 -
 5 files changed, 6 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index fa0f32a686a..88f08cab171 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -11,7 +11,6 @@
  */
 
 #include <mach/hardware.h>
-#include <mach/io.h>
 #include <mach/irqs.h>
 
 #include "../../iomap.h"
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 0779db150da..0e628743bd0 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,8 +36,6 @@
 
 #include <asm/assembler.h>
 
-#include <mach/io.h>
-
 #include "iomap.h"
 #include "pm.h"
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 2ce0b9ab20e..00e9d9e9adf 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -12,7 +12,6 @@
 
 #include <asm/assembler.h>
 
-#include <mach/io.h>
 #include <mach/hardware.h>
 
 #include "iomap.h"
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 925b12b500d..9bb978ecd88 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -16,7 +16,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <mach/io.h>
 
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index fd227160037..4e5b960c32c 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -27,7 +27,6 @@
 #include <linux/bitops.h>
 #include <linux/mutex.h>
 
-#include <mach/io.h>
 #include <plat/vrfb.h>
 #include <plat/sdrc.h>
 
-- 
cgit v1.2.3-70-g09d2


From e71ff6f265c80b6f04f1d16470b5afa58f0b4648 Mon Sep 17 00:00:00 2001
From: Olivier Sobrie <olivier@sobrie.be>
Date: Wed, 29 Feb 2012 08:06:40 +0100
Subject: udlfb: Fix invalid return codes in edid sysfs entry store function

Return a negative errno instead of zero in the write function of
the sysfs entry in case of error.
Also add a check on the return value of dlfb_setup_modes().

Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/udlfb.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 86c8b256e30..157df78e5bf 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1432,19 +1432,22 @@ static ssize_t edid_store(
 	struct device *fbdev = container_of(kobj, struct device, kobj);
 	struct fb_info *fb_info = dev_get_drvdata(fbdev);
 	struct dlfb_data *dev = fb_info->par;
+	int ret;
 
 	/* We only support write of entire EDID at once, no offset*/
 	if ((src_size != EDID_LENGTH) || (src_off != 0))
-		return 0;
+		return -EINVAL;
 
-	dlfb_setup_modes(dev, fb_info, src, src_size);
+	ret = dlfb_setup_modes(dev, fb_info, src, src_size);
+	if (ret)
+		return ret;
 
-	if (dev->edid && (memcmp(src, dev->edid, src_size) == 0)) {
-		pr_info("sysfs written EDID is new default\n");
-		dlfb_ops_set_par(fb_info);
-		return src_size;
-	} else
-		return 0;
+	if (!dev->edid || memcmp(src, dev->edid, src_size))
+		return -EINVAL;
+
+	pr_info("sysfs written EDID is new default\n");
+	dlfb_ops_set_par(fb_info);
+	return src_size;
 }
 
 static ssize_t metrics_reset_store(struct device *fbdev,
-- 
cgit v1.2.3-70-g09d2


From ec0d22e4d563e7cce9f6678e2000900755c2989d Mon Sep 17 00:00:00 2001
From: Wang YanQing <udknight@gmail.com>
Date: Fri, 2 Mar 2012 08:48:50 +0800
Subject: video:uvesafb: Fix oops that uvesafb try to execute NX-protected page

This patch fixes the oops below

[   81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev   , OEM: NVIDIA, VBE v3.0
[   81.609384] uvesafb: protected mode interface info at c000:d350
[   81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e
[   81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[   81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers
[   81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used
[   81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915
[   81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[   81.744153] BUG: unable to handle kernel paging request at c00cd3b3
[   81.744159] IP: [<c00cd3b3>] 0xc00cd3b2
[   81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163
[   81.744171] Oops: 0011 [#1] SMP
[   81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect
[   81.744178]
[   81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer            Aspire 4741                    /Aspire 4741
[   81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0
[   81.744187] EIP is at 0xc00cd3b3
[   81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000
[   81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00
[   81.744192]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000)
[   81.744196] Stack:
[   81.744197]  f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0
[   81.744202]  f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000
[   81.744206]  f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400
[   81.744210] Call Trace:
[   81.744215]  [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb]
[   81.744222]  [<c124a9bc>] fb_pan_display+0x10c/0x160
[   81.744226]  [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb]
[   81.744230]  [<c12598dd>] bit_update_start+0x1d/0x50
[   81.744232]  [<c1255efe>] fbcon_switch+0x39e/0x550
[   81.744235]  [<c125a21a>] ? bit_cursor+0x4ea/0x560
[   81.744240]  [<c129b6cb>] redraw_screen+0x12b/0x220
[   81.744245]  [<c128843b>] ? tty_do_resize+0x3b/0xc0
[   81.744247]  [<c129ef42>] vc_do_resize+0x3d2/0x3e0
[   81.744250]  [<c129efb4>] vc_resize+0x14/0x20
[   81.744253]  [<c12586bd>] fbcon_init+0x29d/0x500
[   81.744255]  [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110
[   81.744258]  [<c129b378>] visual_init+0xb8/0x150
[   81.744261]  [<c129c16c>] bind_con_driver+0x16c/0x360
[   81.744264]  [<c129b47e>] ? register_con_driver+0x6e/0x190
[   81.744267]  [<c129c3a1>] take_over_console+0x41/0x50
[   81.744269]  [<c1257b7a>] fbcon_takeover+0x6a/0xd0
[   81.744272]  [<c12594b8>] fbcon_event_notify+0x758/0x790
[   81.744277]  [<c10929e2>] notifier_call_chain+0x42/0xb0
[   81.744280]  [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90
[   81.744283]  [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20
[   81.744285]  [<c124a5a1>] fb_notifier_call_chain+0x11/0x20
[   81.744288]  [<c124b759>] register_framebuffer+0x1d9/0x2b0
[   81.744293]  [<c1061c73>] ? ioremap_wc+0x33/0x40
[   81.744298]  [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb]
[   81.744302]  [<c12bb81f>] platform_drv_probe+0xf/0x20
[   81.744306]  [<c12ba558>] driver_probe_device+0x68/0x170
[   81.744309]  [<c12ba731>] __device_attach+0x41/0x50
[   81.744313]  [<c12b9088>] bus_for_each_drv+0x48/0x70
[   81.744316]  [<c12ba7f3>] device_attach+0x83/0xa0
[   81.744319]  [<c12ba6f0>] ? __driver_attach+0x90/0x90
[   81.744321]  [<c12b991f>] bus_probe_device+0x6f/0x90
[   81.744324]  [<c12b8a45>] device_add+0x5e5/0x680
[   81.744329]  [<c122a1a3>] ? kvasprintf+0x43/0x60
[   81.744332]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744335]  [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70
[   81.744339]  [<c12bbe9f>] platform_device_add+0xff/0x1b0
[   81.744343]  [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb]
[   81.744346]  [<c100111f>] do_one_initcall+0x2f/0x170
[   81.744350]  [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb]
[   81.744355]  [<c10c6994>] sys_init_module+0xf4/0x1410
[   81.744359]  [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30
[   81.744363]  [<c144cb10>] sysenter_do_call+0x12/0x36
[   81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66
[   81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00
[   81.744391] CR2: 00000000c00cd3b3
[   81.744393] ---[ end trace 18b2c87c925b54d6 ]---

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org
---
 drivers/video/uvesafb.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index e7f69ef572d..f9a670d338d 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -23,6 +23,7 @@
 #include <video/uvesafb.h>
 #ifdef CONFIG_X86
 #include <video/vga.h>
+#include <linux/pci.h>
 #endif
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
@@ -815,8 +816,15 @@ static int __devinit uvesafb_vbe_init(struct fb_info *info)
 	par->pmi_setpal = pmi_setpal;
 	par->ypan = ypan;
 
-	if (par->pmi_setpal || par->ypan)
-		uvesafb_vbe_getpmi(task, par);
+	if (par->pmi_setpal || par->ypan) {
+		if (pcibios_enabled) {
+			uvesafb_vbe_getpmi(task, par);
+		} else {
+			par->pmi_setpal = par->ypan = 0;
+			printk(KERN_WARNING "uvesafb: PCI BIOS area is NX."
+				"Can't use protected mode interface\n");
+		}
+	}
 #else
 	/* The protected mode interface is not available on non-x86. */
 	par->pmi_setpal = par->ypan = 0;
-- 
cgit v1.2.3-70-g09d2


From c2bc0a756b1f98bd712fabe78eb49d7d5ae72075 Mon Sep 17 00:00:00 2001
From: Wang YanQing <udknight@gmail.com>
Date: Fri, 2 Mar 2012 09:45:31 +0800
Subject: video:uvesafb: notice user when we failed to save hardware state

uvesafb_open may failed to save hardware state when kmalloc failed
in uvesafb_vbe_state_save, we should check this and notice user.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/uvesafb.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index f9a670d338d..1f882ed6ba0 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -363,7 +363,7 @@ static u8 *uvesafb_vbe_state_save(struct uvesafb_par *par)
 
 	state = kmalloc(par->vbe_state_size, GFP_KERNEL);
 	if (!state)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	task = uvesafb_prep();
 	if (!task) {
@@ -1180,9 +1180,17 @@ static int uvesafb_open(struct fb_info *info, int user)
 {
 	struct uvesafb_par *par = info->par;
 	int cnt = atomic_read(&par->ref_count);
+	u8 *buf = NULL;
 
-	if (!cnt && par->vbe_state_size)
-		par->vbe_state_orig = uvesafb_vbe_state_save(par);
+	if (!cnt && par->vbe_state_size) {
+		buf =  uvesafb_vbe_state_save(par);
+		if (IS_ERR(buf)) {
+			printk(KERN_WARNING "uvesafb: save hardware state"
+				"failed, error code is %ld!\n", PTR_ERR(buf));
+		} else {
+			par->vbe_state_orig = buf;
+		}
+	}
 
 	atomic_inc(&par->ref_count);
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 9864ca20c50c2fcaba63767a336e16c88b46d7ad Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Fri, 17 Feb 2012 07:55:06 +0000
Subject: viafb: modetable conversion

This patch converts the modetables used in viafb to
- remove the strange thing that sync_end and blanking_end contained
  the length and not the absolute value
- remove hundreds of useless defines
- use fb_videomode and not our own definition so modes defined in
  the subsystem and received via EDID are compatible with ours

As the modes are now stored in a flat structure and no longer in a
tree like thing the lookup time was increased but as it is a rare
event anyway it shouldn't matter. Otherwise the behaviour should be
the same as before.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/dvi.c     |   2 +-
 drivers/video/via/hw.c      |  41 +--
 drivers/video/via/hw.h      |   4 +-
 drivers/video/via/lcd.c     |  53 +---
 drivers/video/via/share.h   | 331 --------------------
 drivers/video/via/viamode.c | 713 ++++++--------------------------------------
 drivers/video/via/viamode.h |  11 +-
 7 files changed, 120 insertions(+), 1035 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index 3312c81e861..6be72f0ba21 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -176,7 +176,7 @@ void viafb_dvi_set_mode(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres, int iga)
 {
 	struct fb_var_screeninfo dvi_var = *var;
-	struct crt_mode_table *rb_mode;
+	const struct fb_videomode *rb_mode;
 	int maxPixelClock;
 
 	maxPixelClock = viaparinfo->shared->tmds_setting_info.max_pixel_clock;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index da80d202f52..1372ef4b979 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1467,7 +1467,8 @@ void viafb_set_vclock(u32 clk, int set_iga)
 	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
 }
 
-static struct display_timing var_to_timing(const struct fb_var_screeninfo *var, u16 cxres, u16 cyres)
+struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres)
 {
 	struct display_timing timing;
 	u16 dx = (var->xres - cxres) / 2, dy = (var->yres - cyres) / 2;
@@ -2007,20 +2008,20 @@ int viafb_setmode(void)
 
 int viafb_get_refresh(int hres, int vres, u32 long_refresh)
 {
-	struct crt_mode_table *best;
+	const struct fb_videomode *best;
 
 	best = viafb_get_best_mode(hres, vres, long_refresh);
 	if (!best)
 		return 60;
 
-	if (abs(best->refresh_rate - long_refresh) > 3) {
+	if (abs(best->refresh - long_refresh) > 3) {
 		if (hres == 1200 && vres == 900)
 			return 49; /* OLPC DCON only supports 50 Hz */
 		else
 			return 60;
 	}
 
-	return best->refresh_rate;
+	return best->refresh;
 }
 
 static void device_off(void)
@@ -2114,26 +2115,16 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 }
 
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
-	struct crt_mode_table *mode)
+	const struct fb_videomode *mode)
 {
-	struct display_timing crt_reg;
-
-	crt_reg = mode->crtc;
-	var->pixclock = 1000000000 / (crt_reg.hor_total * crt_reg.ver_total)
-		* 1000 / mode->refresh_rate;
-	var->xres = crt_reg.hor_addr;
-	var->yres = crt_reg.ver_addr;
-	var->left_margin =
-	    crt_reg.hor_total - (crt_reg.hor_sync_start + crt_reg.hor_sync_end);
-	var->right_margin = crt_reg.hor_sync_start - crt_reg.hor_addr;
-	var->hsync_len = crt_reg.hor_sync_end;
-	var->upper_margin =
-	    crt_reg.ver_total - (crt_reg.ver_sync_start + crt_reg.ver_sync_end);
-	var->lower_margin = crt_reg.ver_sync_start - crt_reg.ver_addr;
-	var->vsync_len = crt_reg.ver_sync_end;
-	var->sync = 0;
-	if (mode->h_sync_polarity == POSITIVE)
-		var->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (mode->v_sync_polarity == POSITIVE)
-		var->sync |= FB_SYNC_VERT_HIGH_ACT;
+	var->pixclock = mode->pixclock;
+	var->xres = mode->xres;
+	var->yres = mode->yres;
+	var->left_margin = mode->left_margin;
+	var->right_margin = mode->right_margin;
+	var->hsync_len = mode->hsync_len;
+	var->upper_margin = mode->upper_margin;
+	var->lower_margin = mode->lower_margin;
+	var->vsync_len = mode->vsync_len;
+	var->sync = mode->sync;
 }
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index cacedc10699..6be243cfc82 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -637,6 +637,8 @@ extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
 
+struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+	u16 cxres, u16 cyres);
 void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres, int iga);
 void viafb_set_vclock(u32 CLK, int set_iga);
@@ -660,7 +662,7 @@ void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 
 int viafb_setmode(void);
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var,
-	struct crt_mode_table *mode);
+	const struct fb_videomode *mode);
 void __devinit viafb_init_chip_info(int chip_type);
 void __devinit viafb_init_dac(int set_iga);
 int viafb_get_refresh(int hres, int vres, u32 float_refresh);
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 6e52711e963..16503791053 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -75,9 +75,6 @@ static void check_diport_of_integrated_lvds(
 	struct lvds_chip_information *plvds_chip_info,
 				     struct lvds_setting_information
 				     *plvds_setting_info);
-static struct display_timing lcd_centering_timging(struct display_timing
-					    mode_crt_reg,
-					   struct display_timing panel_crt_reg);
 
 static inline bool check_lvds_chip(int device_id_subaddr, int device_id)
 {
@@ -552,39 +549,34 @@ void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
 	int panel_hres = plvds_setting_info->lcd_panel_hres;
 	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 clock;
-	struct display_timing mode_crt_reg, panel_crt_reg, timing;
-	struct crt_mode_table *mode_crt_table, *panel_crt_table;
+	struct display_timing timing;
+	struct fb_var_screeninfo panel_var;
+	const struct fb_videomode *mode_crt_table, *panel_crt_table;
 
 	DEBUG_MSG(KERN_INFO "viafb_lcd_set_mode!!\n");
 	/* Get mode table */
 	mode_crt_table = viafb_get_best_mode(set_hres, set_vres, 60);
-	mode_crt_reg = mode_crt_table->crtc;
 	/* Get panel table Pointer */
 	panel_crt_table = viafb_get_best_mode(panel_hres, panel_vres, 60);
-	panel_crt_reg = panel_crt_table->crtc;
+	viafb_fill_var_timing_info(&panel_var, panel_crt_table);
 	DEBUG_MSG(KERN_INFO "bellow viafb_lcd_set_mode!!\n");
 	if (VT1636_LVDS == plvds_chip_info->lvds_chip_name)
 		viafb_init_lvds_vt1636(plvds_setting_info, plvds_chip_info);
-	clock = panel_crt_reg.hor_total * panel_crt_reg.ver_total
-		* panel_crt_table->refresh_rate;
+	clock = PICOS2KHZ(panel_crt_table->pixclock) * 1000;
 	plvds_setting_info->vclk = clock;
 
 	if (set_iga == IGA2 && (set_hres < panel_hres || set_vres < panel_vres)
 		&& plvds_setting_info->display_method == LCD_EXPANDSION) {
-		timing = panel_crt_reg;
+		timing = var_to_timing(&panel_var, panel_hres, panel_vres);
 		load_lcd_scaling(set_hres, set_vres, panel_hres, panel_vres);
 	} else {
-		timing = lcd_centering_timging(mode_crt_reg, panel_crt_reg);
+		timing = var_to_timing(&panel_var, set_hres, set_vres);
 		if (set_iga == IGA2)
 			/* disable scaling */
 			via_write_reg_mask(VIACR, 0x79, 0x00,
 				BIT0 + BIT1 + BIT2);
 	}
 
-	timing.hor_blank_end += timing.hor_blank_start;
-	timing.hor_sync_end += timing.hor_sync_start;
-	timing.ver_blank_end += timing.ver_blank_start;
-	timing.ver_sync_end += timing.ver_sync_start;
 	if (set_iga == IGA1)
 		via_set_primary_timing(&timing);
 	else if (set_iga == IGA2)
@@ -968,37 +960,6 @@ void __devinit viafb_init_lvds_output_interface(struct lvds_chip_information
 	}
 }
 
-static struct display_timing lcd_centering_timging(struct display_timing
-					    mode_crt_reg,
-					    struct display_timing panel_crt_reg)
-{
-	struct display_timing crt_reg;
-
-	crt_reg.hor_total = panel_crt_reg.hor_total;
-	crt_reg.hor_addr = mode_crt_reg.hor_addr;
-	crt_reg.hor_blank_start =
-	    (panel_crt_reg.hor_addr - mode_crt_reg.hor_addr) / 2 +
-	    crt_reg.hor_addr;
-	crt_reg.hor_blank_end = panel_crt_reg.hor_blank_end;
-	crt_reg.hor_sync_start =
-	    (panel_crt_reg.hor_sync_start -
-	     panel_crt_reg.hor_blank_start) + crt_reg.hor_blank_start;
-	crt_reg.hor_sync_end = panel_crt_reg.hor_sync_end;
-
-	crt_reg.ver_total = panel_crt_reg.ver_total;
-	crt_reg.ver_addr = mode_crt_reg.ver_addr;
-	crt_reg.ver_blank_start =
-	    (panel_crt_reg.ver_addr - mode_crt_reg.ver_addr) / 2 +
-	    crt_reg.ver_addr;
-	crt_reg.ver_blank_end = panel_crt_reg.ver_blank_end;
-	crt_reg.ver_sync_start =
-	    (panel_crt_reg.ver_sync_start -
-	     panel_crt_reg.ver_blank_start) + crt_reg.ver_blank_start;
-	crt_reg.ver_sync_end = panel_crt_reg.ver_sync_end;
-
-	return crt_reg;
-}
-
 bool viafb_lcd_get_mobile_state(bool *mobile)
 {
 	unsigned char __iomem *romptr, *tableptr, *biosptr;
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index c01c1c16272..3158dfc90be 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -283,337 +283,6 @@
 #define HW_LAYOUT_LCD1_LCD2     0x04
 #define HW_LAYOUT_LCD_EXTERNAL_LCD2 0x10
 
-/* Definition Refresh Rate */
-#define REFRESH_49      49
-#define REFRESH_50      50
-#define REFRESH_60      60
-#define REFRESH_75      75
-#define REFRESH_85      85
-#define REFRESH_100     100
-#define REFRESH_120     120
-
-/* Definition Sync Polarity*/
-#define NEGATIVE        1
-#define POSITIVE        0
-
-/*480x640@60 Sync Polarity (GTF)
-*/
-#define M480X640_R60_HSP        NEGATIVE
-#define M480X640_R60_VSP        POSITIVE
-
-/*640x480@60 Sync Polarity (VESA Mode)
-*/
-#define M640X480_R60_HSP        NEGATIVE
-#define M640X480_R60_VSP        NEGATIVE
-
-/*640x480@75 Sync Polarity (VESA Mode)
-*/
-#define M640X480_R75_HSP        NEGATIVE
-#define M640X480_R75_VSP        NEGATIVE
-
-/*640x480@85 Sync Polarity (VESA Mode)
-*/
-#define M640X480_R85_HSP        NEGATIVE
-#define M640X480_R85_VSP        NEGATIVE
-
-/*640x480@100 Sync Polarity (GTF Mode)
-*/
-#define M640X480_R100_HSP       NEGATIVE
-#define M640X480_R100_VSP       POSITIVE
-
-/*640x480@120 Sync Polarity (GTF Mode)
-*/
-#define M640X480_R120_HSP       NEGATIVE
-#define M640X480_R120_VSP       POSITIVE
-
-/*720x480@60 Sync Polarity  (GTF Mode)
-*/
-#define M720X480_R60_HSP        NEGATIVE
-#define M720X480_R60_VSP        POSITIVE
-
-/*720x576@60 Sync Polarity  (GTF Mode)
-*/
-#define M720X576_R60_HSP        NEGATIVE
-#define M720X576_R60_VSP        POSITIVE
-
-/*800x600@60 Sync Polarity (VESA Mode)
-*/
-#define M800X600_R60_HSP        POSITIVE
-#define M800X600_R60_VSP        POSITIVE
-
-/*800x600@75 Sync Polarity (VESA Mode)
-*/
-#define M800X600_R75_HSP        POSITIVE
-#define M800X600_R75_VSP        POSITIVE
-
-/*800x600@85 Sync Polarity (VESA Mode)
-*/
-#define M800X600_R85_HSP        POSITIVE
-#define M800X600_R85_VSP        POSITIVE
-
-/*800x600@100 Sync Polarity (GTF Mode)
-*/
-#define M800X600_R100_HSP       NEGATIVE
-#define M800X600_R100_VSP       POSITIVE
-
-/*800x600@120 Sync Polarity (GTF Mode)
-*/
-#define M800X600_R120_HSP       NEGATIVE
-#define M800X600_R120_VSP       POSITIVE
-
-/*800x480@60 Sync Polarity  (CVT Mode)
-*/
-#define M800X480_R60_HSP        NEGATIVE
-#define M800X480_R60_VSP        POSITIVE
-
-/*848x480@60 Sync Polarity  (CVT Mode)
-*/
-#define M848X480_R60_HSP        NEGATIVE
-#define M848X480_R60_VSP        POSITIVE
-
-/*852x480@60 Sync Polarity  (GTF Mode)
-*/
-#define M852X480_R60_HSP        NEGATIVE
-#define M852X480_R60_VSP        POSITIVE
-
-/*1024x512@60 Sync Polarity (GTF Mode)
-*/
-#define M1024X512_R60_HSP       NEGATIVE
-#define M1024X512_R60_VSP       POSITIVE
-
-/*1024x600@60 Sync Polarity (GTF Mode)
-*/
-#define M1024X600_R60_HSP       NEGATIVE
-#define M1024X600_R60_VSP       POSITIVE
-
-/*1024x768@60 Sync Polarity (VESA Mode)
-*/
-#define M1024X768_R60_HSP       NEGATIVE
-#define M1024X768_R60_VSP       NEGATIVE
-
-/*1024x768@75 Sync Polarity (VESA Mode)
-*/
-#define M1024X768_R75_HSP       POSITIVE
-#define M1024X768_R75_VSP       POSITIVE
-
-/*1024x768@85 Sync Polarity (VESA Mode)
-*/
-#define M1024X768_R85_HSP       POSITIVE
-#define M1024X768_R85_VSP       POSITIVE
-
-/*1024x768@100 Sync Polarity (GTF Mode)
-*/
-#define M1024X768_R100_HSP      NEGATIVE
-#define M1024X768_R100_VSP      POSITIVE
-
-/*1152x864@75 Sync Polarity (VESA Mode)
-*/
-#define M1152X864_R75_HSP       POSITIVE
-#define M1152X864_R75_VSP       POSITIVE
-
-/*1280x720@60 Sync Polarity  (GTF Mode)
-*/
-#define M1280X720_R60_HSP       NEGATIVE
-#define M1280X720_R60_VSP       POSITIVE
-
-/* 1280x768@50 Sync Polarity  (GTF Mode) */
-#define M1280X768_R50_HSP       NEGATIVE
-#define M1280X768_R50_VSP       POSITIVE
-
-/*1280x768@60 Sync Polarity  (GTF Mode)
-*/
-#define M1280X768_R60_HSP       NEGATIVE
-#define M1280X768_R60_VSP       POSITIVE
-
-/*1280x800@60 Sync Polarity  (CVT Mode)
-*/
-#define M1280X800_R60_HSP       NEGATIVE
-#define M1280X800_R60_VSP       POSITIVE
-
-/*1280x960@60 Sync Polarity (VESA Mode)
-*/
-#define M1280X960_R60_HSP       POSITIVE
-#define M1280X960_R60_VSP       POSITIVE
-
-/*1280x1024@60 Sync Polarity (VESA Mode)
-*/
-#define M1280X1024_R60_HSP      POSITIVE
-#define M1280X1024_R60_VSP      POSITIVE
-
-/* 1360x768@60 Sync Polarity (CVT Mode) */
-#define M1360X768_R60_HSP       POSITIVE
-#define M1360X768_R60_VSP       POSITIVE
-
-/* 1360x768@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1360X768_RB_R60_HSP       POSITIVE
-#define M1360X768_RB_R60_VSP       NEGATIVE
-
-/* 1368x768@50 Sync Polarity (GTF Mode) */
-#define M1368X768_R50_HSP       NEGATIVE
-#define M1368X768_R50_VSP       POSITIVE
-
-/* 1368x768@60 Sync Polarity (VESA Mode) */
-#define M1368X768_R60_HSP       NEGATIVE
-#define M1368X768_R60_VSP       POSITIVE
-
-/*1280x1024@75 Sync Polarity (VESA Mode)
-*/
-#define M1280X1024_R75_HSP      POSITIVE
-#define M1280X1024_R75_VSP      POSITIVE
-
-/*1280x1024@85 Sync Polarity (VESA Mode)
-*/
-#define M1280X1024_R85_HSP      POSITIVE
-#define M1280X1024_R85_VSP      POSITIVE
-
-/*1440x1050@60 Sync Polarity (GTF Mode)
-*/
-#define M1440X1050_R60_HSP      NEGATIVE
-#define M1440X1050_R60_VSP      POSITIVE
-
-/*1600x1200@60 Sync Polarity (VESA Mode)
-*/
-#define M1600X1200_R60_HSP      POSITIVE
-#define M1600X1200_R60_VSP      POSITIVE
-
-/*1600x1200@75 Sync Polarity (VESA Mode)
-*/
-#define M1600X1200_R75_HSP      POSITIVE
-#define M1600X1200_R75_VSP      POSITIVE
-
-/* 1680x1050@60 Sync Polarity (CVT Mode) */
-#define M1680x1050_R60_HSP      NEGATIVE
-#define M1680x1050_R60_VSP      NEGATIVE
-
-/* 1680x1050@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1680x1050_RB_R60_HSP      POSITIVE
-#define M1680x1050_RB_R60_VSP      NEGATIVE
-
-/* 1680x1050@75 Sync Polarity (CVT Mode) */
-#define M1680x1050_R75_HSP      NEGATIVE
-#define M1680x1050_R75_VSP      POSITIVE
-
-/*1920x1080@60 Sync Polarity (CVT Mode)
-*/
-#define M1920X1080_R60_HSP      NEGATIVE
-#define M1920X1080_R60_VSP      POSITIVE
-
-/* 1920x1080@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1920X1080_RB_R60_HSP  POSITIVE
-#define M1920X1080_RB_R60_VSP  NEGATIVE
-
-/*1920x1440@60 Sync Polarity (VESA Mode)
-*/
-#define M1920X1440_R60_HSP      NEGATIVE
-#define M1920X1440_R60_VSP      POSITIVE
-
-/*1920x1440@75 Sync Polarity (VESA Mode)
-*/
-#define M1920X1440_R75_HSP      NEGATIVE
-#define M1920X1440_R75_VSP      POSITIVE
-
-#if 0
-/* 1400x1050@60 Sync Polarity (VESA Mode) */
-#define M1400X1050_R60_HSP      NEGATIVE
-#define M1400X1050_R60_VSP      NEGATIVE
-#endif
-
-/* 1400x1050@60 Sync Polarity (CVT Mode) */
-#define M1400X1050_R60_HSP      NEGATIVE
-#define M1400X1050_R60_VSP      POSITIVE
-
-/* 1400x1050@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1400X1050_RB_R60_HSP      POSITIVE
-#define M1400X1050_RB_R60_VSP      NEGATIVE
-
-/* 1400x1050@75 Sync Polarity (CVT Mode) */
-#define M1400X1050_R75_HSP      NEGATIVE
-#define M1400X1050_R75_VSP      POSITIVE
-
-/* 960x600@60 Sync Polarity (CVT Mode) */
-#define M960X600_R60_HSP        NEGATIVE
-#define M960X600_R60_VSP        POSITIVE
-
-/* 1000x600@60 Sync Polarity (GTF Mode) */
-#define M1000X600_R60_HSP       NEGATIVE
-#define M1000X600_R60_VSP       POSITIVE
-
-/* 1024x576@60 Sync Polarity (GTF Mode) */
-#define M1024X576_R60_HSP       NEGATIVE
-#define M1024X576_R60_VSP       POSITIVE
-
-/*1024x600@60 Sync Polarity (GTF Mode)*/
-#define M1024X600_R60_HSP       NEGATIVE
-#define M1024X600_R60_VSP       POSITIVE
-
-/* 1088x612@60 Sync Polarity (CVT Mode) */
-#define M1088X612_R60_HSP       NEGATIVE
-#define M1088X612_R60_VSP       POSITIVE
-
-/* 1152x720@60 Sync Polarity (CVT Mode) */
-#define M1152X720_R60_HSP       NEGATIVE
-#define M1152X720_R60_VSP       POSITIVE
-
-/* 1200x720@60 Sync Polarity (GTF Mode) */
-#define M1200X720_R60_HSP       NEGATIVE
-#define M1200X720_R60_VSP       POSITIVE
-
-/* 1200x900@60 Sync Polarity (DCON) */
-#define M1200X900_R60_HSP       POSITIVE
-#define M1200X900_R60_VSP       POSITIVE
-
-/* 1280x600@60 Sync Polarity (GTF Mode) */
-#define M1280x600_R60_HSP       NEGATIVE
-#define M1280x600_R60_VSP       POSITIVE
-
-/* 1280x720@50 Sync Polarity  (GTF Mode) */
-#define M1280X720_R50_HSP       NEGATIVE
-#define M1280X720_R50_VSP       POSITIVE
-
-/* 1440x900@60 Sync Polarity (CVT Mode) */
-#define M1440X900_R60_HSP       NEGATIVE
-#define M1440X900_R60_VSP       POSITIVE
-
-/* 1440x900@75 Sync Polarity (CVT Mode) */
-#define M1440X900_R75_HSP       NEGATIVE
-#define M1440X900_R75_VSP       POSITIVE
-
-/* 1440x900@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1440X900_RB_R60_HSP       POSITIVE
-#define M1440X900_RB_R60_VSP       NEGATIVE
-
-/* 1600x900@60 Sync Polarity (CVT Mode) */
-#define M1600X900_R60_HSP       NEGATIVE
-#define M1600X900_R60_VSP       POSITIVE
-
-/* 1600x900@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1600X900_RB_R60_HSP       POSITIVE
-#define M1600X900_RB_R60_VSP       NEGATIVE
-
-/* 1600x1024@60 Sync Polarity (GTF Mode) */
-#define M1600X1024_R60_HSP      NEGATIVE
-#define M1600X1024_R60_VSP      POSITIVE
-
-/* 1792x1344@60 Sync Polarity (DMT Mode) */
-#define M1792x1344_R60_HSP      NEGATIVE
-#define M1792x1344_R60_VSP      POSITIVE
-
-/* 1856x1392@60 Sync Polarity (DMT Mode) */
-#define M1856x1392_R60_HSP      NEGATIVE
-#define M1856x1392_R60_VSP      POSITIVE
-
-/* 1920x1200@60 Sync Polarity (CVT Mode) */
-#define M1920X1200_R60_HSP      NEGATIVE
-#define M1920X1200_R60_VSP      POSITIVE
-
-/* 1920x1200@60 Sync Polarity (CVT Reduce Blanking Mode) */
-#define M1920X1200_RB_R60_HSP  POSITIVE
-#define M1920X1200_RB_R60_VSP  NEGATIVE
-
-/* 2048x1536@60 Sync Polarity (CVT Mode) */
-#define M2048x1536_R60_HSP      NEGATIVE
-#define M2048x1536_R60_VSP      POSITIVE
-
 /* Definition CRTC Timing Index */
 #define H_TOTAL_INDEX               0
 #define H_ADDR_INDEX                1
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index 0911cac1b2f..0666ab01cf4 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -268,591 +268,78 @@ struct VPITTable VPIT = {
 /* Mode Table       */
 /********************/
 
-/* 480x640 */
-static struct crt_mode_table CRTM480x640[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M480X640_R60_HSP, M480X640_R60_VSP,
-	 {624, 480, 480, 144, 504, 48, 663, 640, 640, 23, 641, 3} }	/* GTF*/
-};
-
-/* 640x480*/
-static struct crt_mode_table CRTM640x480[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M640X480_R60_HSP, M640X480_R60_VSP,
-	 {800, 640, 640, 160, 656, 96, 525, 480, 480, 45, 490, 2} },
-	{REFRESH_75, M640X480_R75_HSP, M640X480_R75_VSP,
-	 {840, 640, 640, 200, 656, 64, 500, 480, 480, 20, 481, 3} },
-	{REFRESH_85, M640X480_R85_HSP, M640X480_R85_VSP,
-	 {832, 640, 640, 192, 696, 56, 509, 480, 480, 29, 481, 3} },
-	{REFRESH_100, M640X480_R100_HSP, M640X480_R100_VSP,
-	 {848, 640, 640, 208, 680, 64, 509, 480, 480, 29, 481, 3} }, /*GTF*/
-	{REFRESH_120, M640X480_R120_HSP, M640X480_R120_VSP,
-	 {848, 640, 640, 208, 680, 64, 515, 480, 480, 35, 481, 3} } /*GTF*/
-};
-
-/*720x480 (GTF)*/
-static struct crt_mode_table CRTM720x480[] = {
-	/*r_rate,hsp,vsp      */
-	/*HT, HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M720X480_R60_HSP, M720X480_R60_VSP,
-	 {896, 720, 720, 176, 736, 72, 497, 480, 480, 17, 481, 3} }
-
-};
-
-/*720x576 (GTF)*/
-static struct crt_mode_table CRTM720x576[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M720X576_R60_HSP, M720X576_R60_VSP,
-	 {912, 720, 720, 192, 744, 72, 597, 576, 576, 21, 577, 3} }
-};
-
-/* 800x480 (CVT) */
-static struct crt_mode_table CRTM800x480[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M800X480_R60_HSP, M800X480_R60_VSP,
-	 {992, 800, 800, 192, 824, 72, 500, 480, 480, 20, 483, 7} }
-};
-
-/* 800x600*/
-static struct crt_mode_table CRTM800x600[] = {
-	/*r_rate,hsp,vsp     */
-	/*HT,   HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M800X600_R60_HSP, M800X600_R60_VSP,
-	 {1056, 800, 800, 256, 840, 128, 628, 600, 600, 28, 601, 4} },
-	{REFRESH_75, M800X600_R75_HSP, M800X600_R75_VSP,
-	 {1056, 800, 800, 256, 816, 80, 625, 600, 600, 25, 601, 3} },
-	{REFRESH_85, M800X600_R85_HSP, M800X600_R85_VSP,
-	 {1048, 800, 800, 248, 832, 64, 631, 600, 600, 31, 601, 3} },
-	{REFRESH_100, M800X600_R100_HSP, M800X600_R100_VSP,
-	 {1072, 800, 800, 272, 848, 88, 636, 600, 600, 36, 601, 3} },
-	{REFRESH_120, M800X600_R120_HSP, M800X600_R120_VSP,
-	 {1088, 800, 800, 288, 856, 88, 643, 600, 600, 43, 601, 3} }
-};
-
-/* 848x480 (CVT) */
-static struct crt_mode_table CRTM848x480[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M848X480_R60_HSP, M848X480_R60_VSP,
-	 {1056, 848, 848, 208, 872, 80, 500, 480, 480, 20, 483, 5} }
-};
-
-/*856x480 (GTF) convert to 852x480*/
-static struct crt_mode_table CRTM852x480[] = {
-	/*r_rate,hsp,vsp     */
-	/*HT,   HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M852X480_R60_HSP, M852X480_R60_VSP,
-	{1064, 856, 856, 208, 872, 88, 497, 480, 480, 17, 481, 3} }
-};
-
-/*1024x512 (GTF)*/
-static struct crt_mode_table CRTM1024x512[] = {
-	/*r_rate,hsp,vsp     */
-	/*HT,   HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1024X512_R60_HSP, M1024X512_R60_VSP,
-	 {1296, 1024, 1024, 272, 1056, 104, 531, 512, 512, 19, 513, 3} }
-
-};
-
-/* 1024x600*/
-static struct crt_mode_table CRTM1024x600[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1024X600_R60_HSP, M1024X600_R60_VSP,
-	 {1312, 1024, 1024, 288, 1064, 104, 622, 600, 600, 22, 601, 3} },
-};
-
-/* 1024x768*/
-static struct crt_mode_table CRTM1024x768[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1024X768_R60_HSP, M1024X768_R60_VSP,
-	{1344, 1024, 1024, 320, 1048, 136, 806, 768, 768, 38, 771, 6} },
-	{REFRESH_75, M1024X768_R75_HSP, M1024X768_R75_VSP,
-	{1312, 1024, 1024, 288, 1040, 96, 800, 768, 768, 32, 769, 3} },
-	{REFRESH_85, M1024X768_R85_HSP, M1024X768_R85_VSP,
-	{1376, 1024, 1024, 352, 1072, 96, 808, 768, 768, 40, 769, 3} },
-	{REFRESH_100, M1024X768_R100_HSP, M1024X768_R100_VSP,
-	{1392, 1024, 1024, 368, 1096, 112, 814, 768, 768, 46, 769, 3} }
-};
-
-/* 1152x864*/
-static struct crt_mode_table CRTM1152x864[] = {
-	/*r_rate,hsp,vsp      */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_75, M1152X864_R75_HSP, M1152X864_R75_VSP,
-	 {1600, 1152, 1152, 448, 1216, 128, 900, 864, 864, 36, 865, 3} }
-
-};
-
-/* 1280x720 (HDMI 720P)*/
-static struct crt_mode_table CRTM1280x720[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE      */
-	{REFRESH_60, M1280X720_R60_HSP, M1280X720_R60_VSP,
-	 {1648, 1280, 1280, 368, 1392, 40, 750, 720, 720, 30, 725, 5} },
-	{REFRESH_50, M1280X720_R50_HSP, M1280X720_R50_VSP,
-	 {1632, 1280, 1280, 352, 1328, 128, 741, 720, 720, 21, 721, 3} }
-};
-
-/*1280x768 (GTF)*/
-static struct crt_mode_table CRTM1280x768[] = {
-	/*r_rate,hsp,vsp     */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1280X768_R60_HSP, M1280X768_R60_VSP,
-	 {1680, 1280, 1280, 400, 1344, 136, 795, 768, 768, 27, 769, 3} },
-	{REFRESH_50, M1280X768_R50_HSP, M1280X768_R50_VSP,
-	 {1648, 1280, 1280, 368, 1336, 128, 791, 768, 768, 23, 769, 3} }
-};
-
-/* 1280x800 (CVT) */
-static struct crt_mode_table CRTM1280x800[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1280X800_R60_HSP, M1280X800_R60_VSP,
-	 {1680, 1280, 1280, 400, 1352, 128, 831, 800, 800, 31, 803, 6} }
-};
-
-/*1280x960*/
-static struct crt_mode_table CRTM1280x960[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1280X960_R60_HSP, M1280X960_R60_VSP,
-	 {1800, 1280, 1280, 520, 1376, 112, 1000, 960, 960, 40, 961, 3} }
-};
-
-/* 1280x1024*/
-static struct crt_mode_table CRTM1280x1024[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1280X1024_R60_HSP, M1280X1024_R60_VSP,
-	 {1688, 1280, 1280, 408, 1328, 112, 1066, 1024, 1024, 42, 1025,
-	  3} },
-	{REFRESH_75, M1280X1024_R75_HSP, M1280X1024_R75_VSP,
-	 {1688, 1280, 1280, 408, 1296, 144, 1066, 1024, 1024, 42, 1025,
-	  3} },
-	{REFRESH_85, M1280X1024_R85_HSP, M1280X1024_R85_VSP,
-	 {1728, 1280, 1280, 448, 1344, 160, 1072, 1024, 1024, 48, 1025, 3} }
-};
-
-/* 1368x768 (GTF) */
-static struct crt_mode_table CRTM1368x768[] = {
-	/* r_rate,  hsp, vsp */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1368X768_R60_HSP, M1368X768_R60_VSP,
-	 {1800, 1368, 1368, 432, 1440, 144, 795, 768, 768, 27, 769, 3} }
-};
-
-/*1440x1050 (GTF)*/
-static struct crt_mode_table CRTM1440x1050[] = {
-	/*r_rate,hsp,vsp      */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1440X1050_R60_HSP, M1440X1050_R60_VSP,
-	 {1936, 1440, 1440, 496, 1536, 152, 1077, 1040, 1040, 37, 1041, 3} }
-};
-
-/* 1600x1200*/
-static struct crt_mode_table CRTM1600x1200[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1600X1200_R60_HSP, M1600X1200_R60_VSP,
-	 {2160, 1600, 1600, 560, 1664, 192, 1250, 1200, 1200, 50, 1201,
-	  3} },
-	{REFRESH_75, M1600X1200_R75_HSP, M1600X1200_R75_VSP,
-	 {2160, 1600, 1600, 560, 1664, 192, 1250, 1200, 1200, 50, 1201, 3} }
-
-};
-
-/* 1680x1050 (CVT) */
-static struct crt_mode_table CRTM1680x1050[] = {
-	/* r_rate,              hsp,             vsp  */
-	/* HT,  HA,  HBS, HBE, HSS, HSE,    VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1680x1050_R60_HSP, M1680x1050_R60_VSP,
-	 {2240, 1680, 1680, 560, 1784, 176, 1089, 1050, 1050, 39, 1053,
-	  6} },
-	{REFRESH_75, M1680x1050_R75_HSP, M1680x1050_R75_VSP,
-	 {2272, 1680, 1680, 592, 1800, 176, 1099, 1050, 1050, 49, 1053, 6} }
-};
-
-/* 1680x1050 (CVT Reduce Blanking) */
-static struct crt_mode_table CRTM1680x1050_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE,    VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1680x1050_RB_R60_HSP, M1680x1050_RB_R60_VSP,
-	 {1840, 1680, 1680, 160, 1728, 32, 1080, 1050, 1050, 30, 1053, 6} }
-};
-
-/* 1920x1080 (CVT)*/
-static struct crt_mode_table CRTM1920x1080[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1920X1080_R60_HSP, M1920X1080_R60_VSP,
-	 {2576, 1920, 1920, 656, 2048, 200, 1120, 1080, 1080, 40, 1083, 5} }
-};
-
-/* 1920x1080 (CVT with Reduce Blanking) */
-static struct crt_mode_table CRTM1920x1080_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1920X1080_RB_R60_HSP, M1920X1080_RB_R60_VSP,
-	 {2080, 1920, 1920, 160, 1968, 32, 1111, 1080, 1080, 31, 1083, 5} }
-};
-
-/* 1920x1440*/
-static struct crt_mode_table CRTM1920x1440[] = {
-	/*r_rate,hsp,vsp */
-	/*HT,  HA,   HBS,  HBE, HSS,  HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1920X1440_R60_HSP, M1920X1440_R60_VSP,
-	 {2600, 1920, 1920, 680, 2048, 208, 1500, 1440, 1440, 60, 1441,
-	  3} },
-	{REFRESH_75, M1920X1440_R75_HSP, M1920X1440_R75_VSP,
-	 {2640, 1920, 1920, 720, 2064, 224, 1500, 1440, 1440, 60, 1441, 3} }
-};
-
-/* 1400x1050 (CVT) */
-static struct crt_mode_table CRTM1400x1050[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1400X1050_R60_HSP, M1400X1050_R60_VSP,
-	 {1864, 1400, 1400, 464, 1488, 144, 1089, 1050, 1050, 39, 1053,
-	  4} },
-	{REFRESH_75, M1400X1050_R75_HSP, M1400X1050_R75_VSP,
-	 {1896, 1400, 1400, 496, 1504, 144, 1099, 1050, 1050, 49, 1053, 4} }
-};
-
-/* 1400x1050 (CVT Reduce Blanking) */
-static struct crt_mode_table CRTM1400x1050_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1400X1050_RB_R60_HSP, M1400X1050_RB_R60_VSP,
-	 {1560, 1400, 1400, 160, 1448, 32, 1080, 1050, 1050, 30, 1053, 4} }
-};
-
-/* 960x600 (CVT) */
-static struct crt_mode_table CRTM960x600[] = {
-	/* r_rate,          hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M960X600_R60_HSP, M960X600_R60_VSP,
-	 {1216, 960, 960, 256, 992, 96, 624, 600, 600, 24, 603, 6} }
-};
-
-/* 1000x600 (GTF) */
-static struct crt_mode_table CRTM1000x600[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1000X600_R60_HSP, M1000X600_R60_VSP,
-	 {1288, 1000, 1000, 288, 1040, 104, 622, 600, 600, 22, 601, 3} }
-};
-
-/* 1024x576 (GTF) */
-static struct crt_mode_table CRTM1024x576[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1024X576_R60_HSP, M1024X576_R60_VSP,
-	 {1312, 1024, 1024, 288, 1064, 104, 597, 576, 576, 21, 577, 3} }
-};
-
-/* 1088x612 (CVT) */
-static struct crt_mode_table CRTM1088x612[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1088X612_R60_HSP, M1088X612_R60_VSP,
-	 {1392, 1088, 1088, 304, 1136, 104, 636, 612, 612, 24, 615, 5} }
-};
-
-/* 1152x720 (CVT) */
-static struct crt_mode_table CRTM1152x720[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1152X720_R60_HSP, M1152X720_R60_VSP,
-	 {1488, 1152, 1152, 336, 1208, 112, 748, 720, 720, 28, 723, 6} }
-};
-
-/* 1200x720 (GTF) */
-static struct crt_mode_table CRTM1200x720[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1200X720_R60_HSP, M1200X720_R60_VSP,
-	 {1568, 1200, 1200, 368, 1256, 128, 746, 720, 720, 26, 721, 3} }
-};
-
-/* 1200x900 (DCON) */
-static struct crt_mode_table DCON1200x900[] = {
-	/* r_rate,               hsp,               vsp   */
-	{REFRESH_49, M1200X900_R60_HSP, M1200X900_R60_VSP,
-	/* The correct htotal is 1240, but this doesn't raster on VX855. */
-	/* Via suggested changing to a multiple of 16, hence 1264.       */
-	/*  HT,   HA,  HBS, HBE,  HSS, HSE,  VT,  VA, VBS, VBE, VSS, VSE */
-	 {1264, 1200, 1200,  64, 1211,  32, 912, 900, 900,  12, 901, 10} }
-};
-
-/* 1280x600 (GTF) */
-static struct crt_mode_table CRTM1280x600[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE, VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1280x600_R60_HSP, M1280x600_R60_VSP,
-	 {1648, 1280, 1280, 368, 1336, 128, 622, 600, 600, 22, 601, 3} }
-};
-
-/* 1360x768 (CVT) */
-static struct crt_mode_table CRTM1360x768[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1360X768_R60_HSP, M1360X768_R60_VSP,
-	 {1776, 1360, 1360, 416, 1432, 136, 798, 768, 768, 30, 771, 5} }
-};
-
-/* 1360x768 (CVT Reduce Blanking) */
-static struct crt_mode_table CRTM1360x768_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1360X768_RB_R60_HSP, M1360X768_RB_R60_VSP,
-	 {1520, 1360, 1360, 160, 1408, 32, 790, 768, 768, 22, 771, 5} }
-};
-
-/* 1366x768 (GTF) */
-static struct crt_mode_table CRTM1366x768[] = {
-	/* r_rate,          hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1368X768_R60_HSP, M1368X768_R60_VSP,
-	 {1800, 1368, 1368, 432, 1440, 144, 795, 768, 768, 27, 769, 3} },
-	{REFRESH_50, M1368X768_R50_HSP, M1368X768_R50_VSP,
-	 {1768, 1368, 1368, 400, 1424, 144, 791, 768, 768, 23, 769, 3} }
-};
-
-/* 1440x900 (CVT) */
-static struct crt_mode_table CRTM1440x900[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1440X900_R60_HSP, M1440X900_R60_VSP,
-	 {1904, 1440, 1440, 464, 1520, 152, 934, 900, 900, 34, 903, 6} },
-	{REFRESH_75, M1440X900_R75_HSP, M1440X900_R75_VSP,
-	 {1936, 1440, 1440, 496, 1536, 152, 942, 900, 900, 42, 903, 6} }
-};
-
-/* 1440x900 (CVT Reduce Blanking) */
-static struct crt_mode_table CRTM1440x900_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1440X900_RB_R60_HSP, M1440X900_RB_R60_VSP,
-	 {1600, 1440, 1440, 160, 1488, 32, 926, 900, 900, 26, 903, 6} }
-};
-
-/* 1600x900 (CVT) */
-static struct crt_mode_table CRTM1600x900[] = {
-	/* r_rate,          hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1600X900_R60_HSP, M1600X900_R60_VSP,
-	 {2112, 1600, 1600, 512, 1688, 168, 934, 900, 900, 34, 903, 5} }
-};
-
-/* 1600x900 (CVT Reduce Blanking) */
-static struct crt_mode_table CRTM1600x900_RB[] = {
-	/* r_rate,           hsp,        vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1600X900_RB_R60_HSP, M1600X900_RB_R60_VSP,
-	 {1760, 1600, 1600, 160, 1648, 32, 926, 900, 900, 26, 903, 5} }
-};
-
-/* 1600x1024 (GTF) */
-static struct crt_mode_table CRTM1600x1024[] = {
-	/* r_rate,          hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1600X1024_R60_HSP, M1600X1024_R60_VSP,
-	 {2144, 1600, 1600, 544, 1704, 168, 1060, 1024, 1024, 36, 1025, 3} }
-};
-
-/* 1792x1344 (DMT) */
-static struct crt_mode_table CRTM1792x1344[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1792x1344_R60_HSP, M1792x1344_R60_VSP,
-	 {2448, 1792, 1792, 656, 1920, 200, 1394, 1344, 1344, 50, 1345, 3} }
-};
-
-/* 1856x1392 (DMT) */
-static struct crt_mode_table CRTM1856x1392[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M1856x1392_R60_HSP, M1856x1392_R60_VSP,
-	 {2528, 1856, 1856, 672, 1952, 224, 1439, 1392, 1392, 47, 1393, 3} }
-};
-
-/* 1920x1200 (CVT) */
-static struct crt_mode_table CRTM1920x1200[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1920X1200_R60_HSP, M1920X1200_R60_VSP,
-	 {2592, 1920, 1920, 672, 2056, 200, 1245, 1200, 1200, 45, 1203, 6} }
-};
-
-/* 1920x1200 (CVT with Reduce Blanking) */
-static struct crt_mode_table CRTM1920x1200_RB[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE, HSS, HSE, VT,  VA,  VBS, VBE, VSS, VSE */
-	{REFRESH_60, M1920X1200_RB_R60_HSP, M1920X1200_RB_R60_VSP,
-	 {2080, 1920, 1920, 160, 1968, 32, 1235, 1200, 1200, 35, 1203, 6} }
-};
-
-/* 2048x1536 (CVT) */
-static struct crt_mode_table CRTM2048x1536[] = {
-	/* r_rate,              hsp,             vsp   */
-	/* HT,  HA,  HBS, HBE,  HSS, HSE,   VT,  VA,  VBS, VBE,  VSS, VSE */
-	{REFRESH_60, M2048x1536_R60_HSP, M2048x1536_R60_VSP,
-	 {2800, 2048, 2048, 752, 2200, 224, 1592, 1536, 1536, 56, 1539, 4} }
-};
-
-static struct VideoModeTable viafb_modes[] = {
-	/* Display : 480x640 (GTF) */
-	{CRTM480x640, ARRAY_SIZE(CRTM480x640)},
-
-	/* Display : 640x480 */
-	{CRTM640x480, ARRAY_SIZE(CRTM640x480)},
-
-	/* Display : 720x480 (GTF) */
-	{CRTM720x480, ARRAY_SIZE(CRTM720x480)},
-
-	/* Display : 720x576 (GTF) */
-	{CRTM720x576, ARRAY_SIZE(CRTM720x576)},
-
-	/* Display : 800x600 */
-	{CRTM800x600, ARRAY_SIZE(CRTM800x600)},
-
-	/* Display : 800x480 (CVT) */
-	{CRTM800x480, ARRAY_SIZE(CRTM800x480)},
-
-	/* Display : 848x480 (CVT) */
-	{CRTM848x480, ARRAY_SIZE(CRTM848x480)},
-
-	/* Display : 852x480 (GTF) */
-	{CRTM852x480, ARRAY_SIZE(CRTM852x480)},
-
-	/* Display : 1024x512 (GTF) */
-	{CRTM1024x512, ARRAY_SIZE(CRTM1024x512)},
-
-	/* Display : 1024x600 */
-	{CRTM1024x600, ARRAY_SIZE(CRTM1024x600)},
-
-	/* Display : 1024x768 */
-	{CRTM1024x768, ARRAY_SIZE(CRTM1024x768)},
-
-	/* Display : 1152x864 */
-	{CRTM1152x864, ARRAY_SIZE(CRTM1152x864)},
-
-	/* Display : 1280x768 (GTF) */
-	{CRTM1280x768, ARRAY_SIZE(CRTM1280x768)},
-
-	/* Display : 960x600 (CVT) */
-	{CRTM960x600, ARRAY_SIZE(CRTM960x600)},
-
-	/* Display : 1000x600 (GTF) */
-	{CRTM1000x600, ARRAY_SIZE(CRTM1000x600)},
-
-	/* Display : 1024x576 (GTF) */
-	{CRTM1024x576, ARRAY_SIZE(CRTM1024x576)},
-
-	/* Display : 1088x612 (GTF) */
-	{CRTM1088x612, ARRAY_SIZE(CRTM1088x612)},
-
-	/* Display : 1152x720 (CVT) */
-	{CRTM1152x720, ARRAY_SIZE(CRTM1152x720)},
-
-	/* Display : 1200x720 (GTF) */
-	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
-
-	/* Display : 1200x900 (DCON) */
-	{DCON1200x900, ARRAY_SIZE(DCON1200x900)},
-
-	/* Display : 1280x600 (GTF) */
-	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
-
-	/* Display : 1280x800 (CVT) */
-	{CRTM1280x800, ARRAY_SIZE(CRTM1280x800)},
-
-	/* Display : 1280x960 */
-	{CRTM1280x960, ARRAY_SIZE(CRTM1280x960)},
-
-	/* Display : 1280x1024 */
-	{CRTM1280x1024, ARRAY_SIZE(CRTM1280x1024)},
-
-	/* Display : 1360x768 (CVT) */
-	{CRTM1360x768, ARRAY_SIZE(CRTM1360x768)},
-
-	/* Display : 1366x768 */
-	{CRTM1366x768, ARRAY_SIZE(CRTM1366x768)},
-
-	/* Display : 1368x768 (GTF) */
-	{CRTM1368x768, ARRAY_SIZE(CRTM1368x768)},
-
-	/* Display : 1440x900 (CVT) */
-	{CRTM1440x900, ARRAY_SIZE(CRTM1440x900)},
-
-	/* Display : 1440x1050 (GTF) */
-	{CRTM1440x1050, ARRAY_SIZE(CRTM1440x1050)},
-
-	/* Display : 1600x900 (CVT) */
-	{CRTM1600x900, ARRAY_SIZE(CRTM1600x900)},
-
-	/* Display : 1600x1024 (GTF) */
-	{CRTM1600x1024, ARRAY_SIZE(CRTM1600x1024)},
-
-	/* Display : 1600x1200 */
-	{CRTM1600x1200, ARRAY_SIZE(CRTM1600x1200)},
-
-	/* Display : 1680x1050 (CVT) */
-	{CRTM1680x1050, ARRAY_SIZE(CRTM1680x1050)},
-
-	/* Display : 1792x1344 (DMT) */
-	{CRTM1792x1344, ARRAY_SIZE(CRTM1792x1344)},
-
-	/* Display : 1856x1392 (DMT) */
-	{CRTM1856x1392, ARRAY_SIZE(CRTM1856x1392)},
-
-	/* Display : 1920x1440 */
-	{CRTM1920x1440, ARRAY_SIZE(CRTM1920x1440)},
-
-	/* Display : 2048x1536 */
-	{CRTM2048x1536, ARRAY_SIZE(CRTM2048x1536)},
-
-	/* Display : 1280x720 */
-	{CRTM1280x720, ARRAY_SIZE(CRTM1280x720)},
-
-	/* Display : 1920x1080 (CVT) */
-	{CRTM1920x1080, ARRAY_SIZE(CRTM1920x1080)},
-
-	/* Display : 1920x1200 (CVT) */
-	{CRTM1920x1200, ARRAY_SIZE(CRTM1920x1200)},
-
-	/* Display : 1400x1050 (CVT) */
-	{CRTM1400x1050, ARRAY_SIZE(CRTM1400x1050)}
-};
-
-static struct VideoModeTable viafb_rb_modes[] = {
-	/* Display : 1360x768 (CVT Reduce Blanking) */
-	{CRTM1360x768_RB, ARRAY_SIZE(CRTM1360x768_RB)},
-
-	/* Display : 1440x900 (CVT Reduce Blanking) */
-	{CRTM1440x900_RB, ARRAY_SIZE(CRTM1440x900_RB)},
-
-	/* Display : 1400x1050 (CVT Reduce Blanking) */
-	{CRTM1400x1050_RB, ARRAY_SIZE(CRTM1400x1050_RB)},
-
-	/* Display : 1600x900 (CVT Reduce Blanking) */
-	{CRTM1600x900_RB, ARRAY_SIZE(CRTM1600x900_RB)},
-
-	/* Display : 1680x1050 (CVT Reduce Blanking) */
-	{CRTM1680x1050_RB, ARRAY_SIZE(CRTM1680x1050_RB)},
-
-	/* Display : 1920x1080 (CVT Reduce Blanking) */
-	{CRTM1920x1080_RB, ARRAY_SIZE(CRTM1920x1080_RB)},
-
-	/* Display : 1920x1200 (CVT Reduce Blanking) */
-	{CRTM1920x1200_RB, ARRAY_SIZE(CRTM1920x1200_RB)}
-};
+static const struct fb_videomode viafb_modes[] = {
+	{NULL, 60, 480, 640, 40285, 72, 24, 19, 1, 48, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, 0, 0, 0},
+	{NULL, 75, 640, 480, 31746, 120, 16, 16, 1, 64, 3, 0, 0, 0},
+	{NULL, 85, 640, 480, 27780, 80, 56, 25, 1, 56, 3, 0, 0, 0},
+	{NULL, 100, 640, 480, 23167, 104, 40, 25, 1, 64, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 120, 640, 480, 19081, 104, 40, 31, 1, 64, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 720, 480, 37426, 88, 16, 13, 1, 72, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 720, 576, 30611, 96, 24, 17, 1, 72, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 800, 600, 25131, 88, 40, 23, 1, 128, 4, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 800, 600, 20202, 160, 16, 21, 1, 80, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 85, 800, 600, 17790, 152, 32, 27, 1, 64, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 100, 800, 600, 14667, 136, 48, 32, 1, 88, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 120, 800, 600, 11911, 144, 56, 39, 1, 88, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 800, 480, 33602, 96, 24, 10, 3, 72, 7, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 848, 480, 31565, 104, 24, 12, 3, 80, 5, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 856, 480, 31517, 104, 16, 13, 1, 88, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1024, 512, 24218, 136, 32, 15, 1, 104, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1024, 600, 20423, 144, 40, 18, 1, 104, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1024, 768, 15385, 160, 24, 29, 3, 136, 6, 0, 0, 0},
+	{NULL, 75, 1024, 768, 12703, 176, 16, 28, 1, 96, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 85, 1024, 768, 10581, 208, 48, 36, 1, 96, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 100, 1024, 768, 8825, 184, 72, 42, 1, 112, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1152, 864, 9259, 256, 64, 32, 1, 128, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 768, 12478, 200, 64, 23, 1, 136, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 50, 1280, 768, 15342, 184, 56, 19, 1, 128, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 960, 600, 21964, 128, 32, 15, 3, 96, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1000, 600, 20803, 144, 40, 18, 1, 104, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1024, 576, 21278, 144, 40, 17, 1, 104, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1088, 612, 18825, 152, 48, 16, 3, 104, 5, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1152, 720, 14974, 168, 56, 19, 3, 112, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1200, 720, 14248, 184, 56, 22, 1, 128, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 49, 1200, 900, 17703, 21, 11, 1, 1, 32, 10, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 600, 16259, 184, 56, 18, 1, 128, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 800, 11938, 200, 72, 22, 3, 128, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 1024, 9262, 248, 48, 38, 1, 112, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1280, 1024, 7409, 248, 16, 38, 1, 144, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 85, 1280, 1024, 6351, 224, 64, 44, 1, 160, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1360, 768, 11759, 208, 72, 22, 3, 136, 5, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1368, 768, 11646, 216, 72, 23, 1, 144, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 50, 1368, 768, 14301, 200, 56, 19, 1, 144, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1368, 768, 11646, 216, 72, 23, 1, 144, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1440, 900, 9372, 232, 80, 25, 3, 152, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1440, 900, 7311, 248, 96, 33, 3, 152, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1440, 1040, 7993, 248, 96, 33, 1, 152, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1600, 900, 8449, 256, 88, 26, 3, 168, 5, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1600, 1024, 7333, 272, 104, 32, 1, 168, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1680, 1050, 6832, 280, 104, 30, 3, 176, 6, 0, 0, 0},
+	{NULL, 75, 1680, 1050, 5339, 296, 120, 40, 3, 176, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1792, 1344, 4883, 328, 128, 46, 1, 200, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1856, 1392, 4581, 352, 96, 43, 1, 224, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1920, 1440, 4273, 344, 128, 56, 1, 208, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1920, 1440, 3367, 352, 144, 56, 1, 224, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 2048, 1536, 3738, 376, 152, 49, 3, 224, 4, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1280, 720, 13484, 216, 112, 20, 5, 40, 5, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 50, 1280, 720, 16538, 176, 48, 17, 1, 128, 3, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1920, 1080, 5776, 328, 128, 32, 3, 200, 5, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1920, 1200, 5164, 336, 136, 36, 3, 200, 6, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 60, 1400, 1050, 8210, 232, 88, 32, 3, 144, 4, FB_SYNC_VERT_HIGH_ACT, 0, 0},
+	{NULL, 75, 1400, 1050, 6398, 248, 104, 42, 3, 144, 4, FB_SYNC_VERT_HIGH_ACT, 0, 0} };
+
+static const struct fb_videomode viafb_rb_modes[] = {
+	{NULL, 60, 1360, 768, 13879, 80, 48, 14, 3, 32, 5, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1440, 900, 11249, 80, 48, 17, 3, 32, 6, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1400, 1050, 9892, 80, 48, 23, 3, 32, 4, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1600, 900, 10226, 80, 48, 18, 3, 32, 5, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1680, 1050, 8387, 80, 48, 21, 3, 32, 6, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1920, 1080, 7212, 80, 48, 23, 3, 32, 5, FB_SYNC_HOR_HIGH_ACT, 0, 0},
+	{NULL, 60, 1920, 1200, 6488, 80, 48, 26, 3, 32, 6, FB_SYNC_HOR_HIGH_ACT, 0, 0} };
 
 int NUM_TOTAL_CN400_ModeXregs = ARRAY_SIZE(CN400_ModeXregs);
 int NUM_TOTAL_CN700_ModeXregs = ARRAY_SIZE(CN700_ModeXregs);
@@ -863,56 +350,34 @@ int NUM_TOTAL_CLE266_ModeXregs = ARRAY_SIZE(CLE266_ModeXregs);
 int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
 
 
-static struct VideoModeTable *get_modes(struct VideoModeTable *vmt, int n,
-	int hres, int vres)
-{
-	int i;
-
-	for (i = 0; i < n; i++)
-		if (vmt[i].mode_array &&
-			vmt[i].crtc[0].crtc.hor_addr == hres &&
-			vmt[i].crtc[0].crtc.ver_addr == vres)
-			return &viafb_modes[i];
-
-	return NULL;
-}
-
-static struct crt_mode_table *get_best_mode(struct VideoModeTable *vmt,
-	int refresh)
+static const struct fb_videomode *get_best_mode(
+	const struct fb_videomode *modes, int n,
+	int hres, int vres, int refresh)
 {
-	struct crt_mode_table *best;
+	const struct fb_videomode *best = NULL;
 	int i;
 
-	if (!vmt)
-		return NULL;
+	for (i = 0; i < n; i++) {
+		if (modes[i].xres != hres || modes[i].yres != vres)
+			continue;
 
-	best = &vmt->crtc[0];
-	for (i = 1; i < vmt->mode_array; i++) {
-		if (abs(vmt->crtc[i].refresh_rate - refresh)
-			< abs(best->refresh_rate - refresh))
-			best = &vmt->crtc[i];
+		if (!best || abs(modes[i].refresh - refresh) <
+			abs(best->refresh - refresh))
+			best = &modes[i];
 	}
 
 	return best;
 }
 
-static struct VideoModeTable *viafb_get_mode(int hres, int vres)
-{
-	return get_modes(viafb_modes, ARRAY_SIZE(viafb_modes), hres, vres);
-}
-
-struct crt_mode_table *viafb_get_best_mode(int hres, int vres, int refresh)
+const struct fb_videomode *viafb_get_best_mode(int hres, int vres, int refresh)
 {
-	return get_best_mode(viafb_get_mode(hres, vres), refresh);
+	return get_best_mode(viafb_modes, ARRAY_SIZE(viafb_modes),
+		hres, vres, refresh);
 }
 
-static struct VideoModeTable *viafb_get_rb_mode(int hres, int vres)
-{
-	return get_modes(viafb_rb_modes, ARRAY_SIZE(viafb_rb_modes), hres,
-		vres);
-}
-
-struct crt_mode_table *viafb_get_best_rb_mode(int hres, int vres, int refresh)
+const struct fb_videomode *viafb_get_best_rb_mode(int hres, int vres,
+	int refresh)
 {
-	return get_best_mode(viafb_get_rb_mode(hres, vres), refresh);
+	return get_best_mode(viafb_rb_modes, ARRAY_SIZE(viafb_rb_modes),
+		hres, vres, refresh);
 }
diff --git a/drivers/video/via/viamode.h b/drivers/video/via/viamode.h
index 5917a2b00e1..dd19106698e 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/via/viamode.h
@@ -31,11 +31,6 @@ struct VPITTable {
 	unsigned char AR[StdAR];
 };
 
-struct VideoModeTable {
-	struct crt_mode_table *crtc;
-	int mode_array;
-};
-
 struct patch_table {
 	int table_length;
 	struct io_reg *io_reg_table;
@@ -60,7 +55,9 @@ extern struct io_reg PM1024x768[];
 extern struct patch_table res_patch_table[];
 extern struct VPITTable VPIT;
 
-struct crt_mode_table *viafb_get_best_mode(int hres, int vres, int refresh);
-struct crt_mode_table *viafb_get_best_rb_mode(int hres, int vres, int refresh);
+const struct fb_videomode *viafb_get_best_mode(int hres, int vres,
+	int refresh);
+const struct fb_videomode *viafb_get_best_rb_mode(int hres, int vres,
+	int refresh);
 
 #endif /* __VIAMODE_H__ */
-- 
cgit v1.2.3-70-g09d2


From 838ac785d521e091bd8b5f6a2b545166f5f32b77 Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Sun, 26 Feb 2012 10:51:51 +0000
Subject: viafb: avoid refresh and mode lookup in set_par

As check_var already ensures that the mode is valid there is no need
to do those expensive lookups here again. The only thing that might
change is that the deprecated interface could report slightly
different refresh rates due to rounding errors.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/viafbdev.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 7529340f4ea..0c8837565bc 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -287,26 +287,22 @@ static int viafb_set_par(struct fb_info *info)
 			viafb_second_yres, viafb_bpp1, 1);
 	}
 
-	refresh = viafb_get_refresh(info->var.xres, info->var.yres,
-		get_var_refresh(&info->var));
-	if (viafb_get_best_mode(viafbinfo->var.xres, viafbinfo->var.yres,
-		refresh)) {
-		if (viafb_dual_fb && viapar->iga_path == IGA2) {
-			viafb_bpp1 = info->var.bits_per_pixel;
-			viafb_refresh1 = refresh;
-		} else {
-			viafb_bpp = info->var.bits_per_pixel;
-			viafb_refresh = refresh;
-		}
-
-		if (info->var.accel_flags & FB_ACCELF_TEXT)
-			info->flags &= ~FBINFO_HWACCEL_DISABLED;
-		else
-			info->flags |= FBINFO_HWACCEL_DISABLED;
-		viafb_setmode();
-		viafb_pan_display(&info->var, info);
+	refresh = get_var_refresh(&info->var);
+	if (viafb_dual_fb && viapar->iga_path == IGA2) {
+		viafb_bpp1 = info->var.bits_per_pixel;
+		viafb_refresh1 = refresh;
+	} else {
+		viafb_bpp = info->var.bits_per_pixel;
+		viafb_refresh = refresh;
 	}
 
+	if (info->var.accel_flags & FB_ACCELF_TEXT)
+		info->flags &= ~FBINFO_HWACCEL_DISABLED;
+	else
+		info->flags |= FBINFO_HWACCEL_DISABLED;
+	viafb_setmode();
+	viafb_pan_display(&info->var, info);
+
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From f1f60b5f55099a658a5f79cc453b371a439864e6 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 7 Sep 2011 11:09:26 +0200
Subject: fbdev: sh_mobile_lcdc: Reorder code into sections

Make the driver more readable by reordering code and splitting it into
logical sections. Reorder the headers alphabetically.

No modification to the code have been performed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 421 +++++++++++++++++++++------------------
 1 file changed, 231 insertions(+), 190 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index aac5b369d73..8b18360fd47 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -8,26 +8,27 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
+#include <linux/atomic.h>
+#include <linux/backlight.h>
 #include <linux/clk.h>
-#include <linux/pm_runtime.h>
-#include <linux/platform_device.h>
+#include <linux/console.h>
 #include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/videodev2.h>
-#include <linux/vmalloc.h>
 #include <linux/ioctl.h>
-#include <linux/slab.h>
-#include <linux/console.h>
-#include <linux/backlight.h>
-#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mobile_meram.h>
-#include <linux/atomic.h>
 
 #include "sh_mobile_lcdcfb.h"
 
@@ -37,6 +38,24 @@
 #define MAX_XRES 1920
 #define MAX_YRES 1080
 
+struct sh_mobile_lcdc_priv {
+	void __iomem *base;
+	int irq;
+	atomic_t hw_usecnt;
+	struct device *dev;
+	struct clk *dot_clk;
+	unsigned long lddckr;
+	struct sh_mobile_lcdc_chan ch[2];
+	struct notifier_block notifier;
+	int started;
+	int forced_fourcc; /* 2 channel LCDC must share fourcc setting */
+	struct sh_mobile_meram_info *meram_dev;
+};
+
+/* -----------------------------------------------------------------------------
+ * Registers access
+ */
+
 static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
 	[LDDCKPAT1R] = 0x400,
 	[LDDCKPAT2R] = 0x404,
@@ -75,38 +94,6 @@ static unsigned long lcdc_offs_sublcd[NR_CH_REGS] = {
 	[LDPMR] = 0x63c,
 };
 
-static const struct fb_videomode default_720p = {
-	.name = "HDMI 720p",
-	.xres = 1280,
-	.yres = 720,
-
-	.left_margin = 220,
-	.right_margin = 110,
-	.hsync_len = 40,
-
-	.upper_margin = 20,
-	.lower_margin = 5,
-	.vsync_len = 5,
-
-	.pixclock = 13468,
-	.refresh = 60,
-	.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-};
-
-struct sh_mobile_lcdc_priv {
-	void __iomem *base;
-	int irq;
-	atomic_t hw_usecnt;
-	struct device *dev;
-	struct clk *dot_clk;
-	unsigned long lddckr;
-	struct sh_mobile_lcdc_chan ch[2];
-	struct notifier_block notifier;
-	int started;
-	int forced_fourcc; /* 2 channel LCDC must share fourcc setting */
-	struct sh_mobile_meram_info *meram_dev;
-};
-
 static bool banked(int reg_nr)
 {
 	switch (reg_nr) {
@@ -127,6 +114,11 @@ static bool banked(int reg_nr)
 	return false;
 }
 
+static int lcdc_chan_is_sublcd(struct sh_mobile_lcdc_chan *chan)
+{
+	return chan->cfg.chan == LCDC_CHAN_SUBLCD;
+}
+
 static void lcdc_write_chan(struct sh_mobile_lcdc_chan *chan,
 			    int reg_nr, unsigned long data)
 {
@@ -169,11 +161,77 @@ static void lcdc_wait_bit(struct sh_mobile_lcdc_priv *priv,
 		cpu_relax();
 }
 
-static int lcdc_chan_is_sublcd(struct sh_mobile_lcdc_chan *chan)
+/* -----------------------------------------------------------------------------
+ * Clock management
+ */
+
+static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
 {
-	return chan->cfg.chan == LCDC_CHAN_SUBLCD;
+	if (atomic_inc_and_test(&priv->hw_usecnt)) {
+		if (priv->dot_clk)
+			clk_enable(priv->dot_clk);
+		pm_runtime_get_sync(priv->dev);
+		if (priv->meram_dev && priv->meram_dev->pdev)
+			pm_runtime_get_sync(&priv->meram_dev->pdev->dev);
+	}
 }
 
+static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
+{
+	if (atomic_sub_return(1, &priv->hw_usecnt) == -1) {
+		if (priv->meram_dev && priv->meram_dev->pdev)
+			pm_runtime_put_sync(&priv->meram_dev->pdev->dev);
+		pm_runtime_put(priv->dev);
+		if (priv->dot_clk)
+			clk_disable(priv->dot_clk);
+	}
+}
+
+static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
+				       int clock_source,
+				       struct sh_mobile_lcdc_priv *priv)
+{
+	char *str;
+
+	switch (clock_source) {
+	case LCDC_CLK_BUS:
+		str = "bus_clk";
+		priv->lddckr = LDDCKR_ICKSEL_BUS;
+		break;
+	case LCDC_CLK_PERIPHERAL:
+		str = "peripheral_clk";
+		priv->lddckr = LDDCKR_ICKSEL_MIPI;
+		break;
+	case LCDC_CLK_EXTERNAL:
+		str = NULL;
+		priv->lddckr = LDDCKR_ICKSEL_HDMI;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (str) {
+		priv->dot_clk = clk_get(&pdev->dev, str);
+		if (IS_ERR(priv->dot_clk)) {
+			dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
+			return PTR_ERR(priv->dot_clk);
+		}
+	}
+
+	/* Runtime PM support involves two step for this driver:
+	 * 1) Enable Runtime PM
+	 * 2) Force Runtime PM Resume since hardware is accessed from probe()
+	 */
+	priv->dev = &pdev->dev;
+	pm_runtime_enable(priv->dev);
+	pm_runtime_resume(priv->dev);
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Sys panel and deferred I/O
+ */
+
 static void lcdc_sys_write_index(void *handle, unsigned long data)
 {
 	struct sh_mobile_lcdc_chan *ch = handle;
@@ -216,69 +274,6 @@ struct sh_mobile_lcdc_sys_bus_ops sh_mobile_lcdc_sys_bus_ops = {
 	lcdc_sys_read_data,
 };
 
-static int sh_mobile_format_fourcc(const struct fb_var_screeninfo *var)
-{
-	if (var->grayscale > 1)
-		return var->grayscale;
-
-	switch (var->bits_per_pixel) {
-	case 16:
-		return V4L2_PIX_FMT_RGB565;
-	case 24:
-		return V4L2_PIX_FMT_BGR24;
-	case 32:
-		return V4L2_PIX_FMT_BGR32;
-	default:
-		return 0;
-	}
-}
-
-static int sh_mobile_format_is_fourcc(const struct fb_var_screeninfo *var)
-{
-	return var->grayscale > 1;
-}
-
-static bool sh_mobile_format_is_yuv(const struct fb_var_screeninfo *var)
-{
-	if (var->grayscale <= 1)
-		return false;
-
-	switch (var->grayscale) {
-	case V4L2_PIX_FMT_NV12:
-	case V4L2_PIX_FMT_NV21:
-	case V4L2_PIX_FMT_NV16:
-	case V4L2_PIX_FMT_NV61:
-	case V4L2_PIX_FMT_NV24:
-	case V4L2_PIX_FMT_NV42:
-		return true;
-
-	default:
-		return false;
-	}
-}
-
-static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv)
-{
-	if (atomic_inc_and_test(&priv->hw_usecnt)) {
-		if (priv->dot_clk)
-			clk_enable(priv->dot_clk);
-		pm_runtime_get_sync(priv->dev);
-		if (priv->meram_dev && priv->meram_dev->pdev)
-			pm_runtime_get_sync(&priv->meram_dev->pdev->dev);
-	}
-}
-
-static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
-{
-	if (atomic_sub_return(1, &priv->hw_usecnt) == -1) {
-		if (priv->meram_dev && priv->meram_dev->pdev)
-			pm_runtime_put_sync(&priv->meram_dev->pdev->dev);
-		pm_runtime_put(priv->dev);
-		if (priv->dot_clk)
-			clk_disable(priv->dot_clk);
-	}
-}
-
 static int sh_mobile_lcdc_sginit(struct fb_info *info,
 				  struct list_head *pagelist)
 {
@@ -345,6 +340,55 @@ static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
 		schedule_delayed_work(&info->deferred_work, fbdefio->delay);
 }
 
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+static int sh_mobile_format_fourcc(const struct fb_var_screeninfo *var)
+{
+	if (var->grayscale > 1)
+		return var->grayscale;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		return V4L2_PIX_FMT_RGB565;
+	case 24:
+		return V4L2_PIX_FMT_BGR24;
+	case 32:
+		return V4L2_PIX_FMT_BGR32;
+	default:
+		return 0;
+	}
+}
+
+static int sh_mobile_format_is_fourcc(const struct fb_var_screeninfo *var)
+{
+	return var->grayscale > 1;
+}
+
+static bool sh_mobile_format_is_yuv(const struct fb_var_screeninfo *var)
+{
+	if (var->grayscale <= 1)
+		return false;
+
+	switch (var->grayscale) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+	case V4L2_PIX_FMT_NV24:
+	case V4L2_PIX_FMT_NV42:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/* -----------------------------------------------------------------------------
+ * Start, stop and IRQ
+ */
+
 static irqreturn_t sh_mobile_lcdc_irq(int irq, void *data)
 {
 	struct sh_mobile_lcdc_priv *priv = data;
@@ -790,86 +834,9 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 			sh_mobile_lcdc_clk_off(priv);
 }
 
-static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
-{
-	int interface_type = ch->cfg.interface_type;
-
-	switch (interface_type) {
-	case RGB8:
-	case RGB9:
-	case RGB12A:
-	case RGB12B:
-	case RGB16:
-	case RGB18:
-	case RGB24:
-	case SYS8A:
-	case SYS8B:
-	case SYS8C:
-	case SYS8D:
-	case SYS9:
-	case SYS12:
-	case SYS16A:
-	case SYS16B:
-	case SYS16C:
-	case SYS18:
-	case SYS24:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* SUBLCD only supports SYS interface */
-	if (lcdc_chan_is_sublcd(ch)) {
-		if (!(interface_type & LDMT1R_IFM))
-			return -EINVAL;
-
-		interface_type &= ~LDMT1R_IFM;
-	}
-
-	ch->ldmt1r_value = interface_type;
-	return 0;
-}
-
-static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
-				       int clock_source,
-				       struct sh_mobile_lcdc_priv *priv)
-{
-	char *str;
-
-	switch (clock_source) {
-	case LCDC_CLK_BUS:
-		str = "bus_clk";
-		priv->lddckr = LDDCKR_ICKSEL_BUS;
-		break;
-	case LCDC_CLK_PERIPHERAL:
-		str = "peripheral_clk";
-		priv->lddckr = LDDCKR_ICKSEL_MIPI;
-		break;
-	case LCDC_CLK_EXTERNAL:
-		str = NULL;
-		priv->lddckr = LDDCKR_ICKSEL_HDMI;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (str) {
-		priv->dot_clk = clk_get(&pdev->dev, str);
-		if (IS_ERR(priv->dot_clk)) {
-			dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
-			return PTR_ERR(priv->dot_clk);
-		}
-	}
-
-	/* Runtime PM support involves two step for this driver:
-	 * 1) Enable Runtime PM
-	 * 2) Force Runtime PM Resume since hardware is accessed from probe()
-	 */
-	priv->dev = &pdev->dev;
-	pm_runtime_enable(priv->dev);
-	pm_runtime_resume(priv->dev);
-	return 0;
-}
+/* -----------------------------------------------------------------------------
+ * Frame buffer operations
+ */
 
 static int sh_mobile_lcdc_setcolreg(u_int regno,
 				    u_int red, u_int green, u_int blue,
@@ -1334,6 +1301,10 @@ static struct fb_ops sh_mobile_lcdc_ops = {
 	.fb_set_par	= sh_mobile_set_par,
 };
 
+/* -----------------------------------------------------------------------------
+ * Backlight
+ */
+
 static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
 {
 	struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
@@ -1393,6 +1364,10 @@ static void sh_mobile_lcdc_bl_remove(struct backlight_device *bdev)
 	backlight_device_unregister(bdev);
 }
 
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
 static int sh_mobile_lcdc_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -1436,6 +1411,10 @@ static const struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
 	.runtime_resume = sh_mobile_lcdc_runtime_resume,
 };
 
+/* -----------------------------------------------------------------------------
+ * Framebuffer notifier
+ */
+
 /* locking: called with info->lock held */
 static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 				 unsigned long action, void *data)
@@ -1476,6 +1455,28 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
+/* -----------------------------------------------------------------------------
+ * Probe/remove and driver init/exit
+ */
+
+static const struct fb_videomode default_720p = {
+	.name = "HDMI 720p",
+	.xres = 1280,
+	.yres = 720,
+
+	.left_margin = 220,
+	.right_margin = 110,
+	.hsync_len = 40,
+
+	.upper_margin = 20,
+	.lower_margin = 5,
+	.vsync_len = 5,
+
+	.pixclock = 13468,
+	.refresh = 60,
+	.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+};
+
 static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 {
 	struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
@@ -1527,6 +1528,46 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
+{
+	int interface_type = ch->cfg.interface_type;
+
+	switch (interface_type) {
+	case RGB8:
+	case RGB9:
+	case RGB12A:
+	case RGB12B:
+	case RGB16:
+	case RGB18:
+	case RGB24:
+	case SYS8A:
+	case SYS8B:
+	case SYS8C:
+	case SYS8D:
+	case SYS9:
+	case SYS12:
+	case SYS16A:
+	case SYS16B:
+	case SYS16C:
+	case SYS18:
+	case SYS24:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* SUBLCD only supports SYS interface */
+	if (lcdc_chan_is_sublcd(ch)) {
+		if (!(interface_type & LDMT1R_IFM))
+			return -EINVAL;
+
+		interface_type &= ~LDMT1R_IFM;
+	}
+
+	ch->ldmt1r_value = interface_type;
+	return 0;
+}
+
 static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 						 struct device *dev)
 {
-- 
cgit v1.2.3-70-g09d2


From 217e9c4353aa86f0c7eeb4c275bca73ea8b53be1 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 7 Sep 2011 11:59:00 +0200
Subject: fbdev: sh_mobile_lcdc: Mark init-only symbols with __devinit(const)

default_720p and sh_mobile_lcdc_check_interface are used at device
initialization time only. Mark them as __devinitconst and __devinit
respectively.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 8b18360fd47..d9f394e3c21 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1459,7 +1459,7 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
  * Probe/remove and driver init/exit
  */
 
-static const struct fb_videomode default_720p = {
+static const struct fb_videomode default_720p __devinitconst = {
 	.name = "HDMI 720p",
 	.xres = 1280,
 	.yres = 720,
@@ -1528,7 +1528,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
+static int __devinit sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
 {
 	int interface_type = ch->cfg.interface_type;
 
-- 
cgit v1.2.3-70-g09d2


From 4774c12aacafc0b8be81b1d159be5a761889e2d7 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 7 Sep 2011 15:47:07 +0200
Subject: fbdev: sh_mobile_lcdc: Move pm runtime enable to probe()

The pm_runtime_enable() and pm_runtime_resume() calls don't belong to
sh_mobile_lcdc_setup_clocks(). Move them to the probe function. Remove
the unneeded pm_runtime_resume() call.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 34 ++++++++++++++++------------------
 1 file changed, 16 insertions(+), 18 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index d9f394e3c21..75f613b024b 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -191,6 +191,7 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 				       int clock_source,
 				       struct sh_mobile_lcdc_priv *priv)
 {
+	struct clk *clk;
 	char *str;
 
 	switch (clock_source) {
@@ -210,21 +211,16 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	if (str) {
-		priv->dot_clk = clk_get(&pdev->dev, str);
-		if (IS_ERR(priv->dot_clk)) {
-			dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
-			return PTR_ERR(priv->dot_clk);
-		}
+	if (str == NULL)
+		return 0;
+
+	clk = clk_get(&pdev->dev, str);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
+		return PTR_ERR(clk);
 	}
 
-	/* Runtime PM support involves two step for this driver:
-	 * 1) Enable Runtime PM
-	 * 2) Force Runtime PM Resume since hardware is accessed from probe()
-	 */
-	priv->dev = &pdev->dev;
-	pm_runtime_enable(priv->dev);
-	pm_runtime_resume(priv->dev);
+	priv->dot_clk = clk;
 	return 0;
 }
 
@@ -1513,11 +1509,10 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 			sh_mobile_lcdc_bl_remove(priv->ch[i].bl);
 	}
 
-	if (priv->dot_clk)
+	if (priv->dot_clk) {
+		pm_runtime_disable(&pdev->dev);
 		clk_put(priv->dot_clk);
-
-	if (priv->dev)
-		pm_runtime_disable(priv->dev);
+	}
 
 	if (priv->base)
 		iounmap(priv->base);
@@ -1739,6 +1734,8 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->dev = &pdev->dev;
+	priv->meram_dev = pdata->meram_dev;
 	platform_set_drvdata(pdev, priv);
 
 	error = request_irq(i, sh_mobile_lcdc_irq, 0,
@@ -1804,7 +1801,8 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	priv->meram_dev = pdata->meram_dev;
+	/* Enable runtime PM. */
+	pm_runtime_enable(&pdev->dev);
 
 	for (i = 0; i < num_channels; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
-- 
cgit v1.2.3-70-g09d2


From 0a7f17aa3d6b693700af2e1cbf8cfdd28e18aebb Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 7 Sep 2011 16:02:31 +0200
Subject: fbdev: sh_mobile_lcdc: Don't pass struct device around

Pass a pointer to a struct sh_mobile_lcdc_priv instead, which stores a
pointer to the device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 41 ++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 75f613b024b..a805f96eb16 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -187,9 +187,8 @@ static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv)
 	}
 }
 
-static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
-				       int clock_source,
-				       struct sh_mobile_lcdc_priv *priv)
+static int sh_mobile_lcdc_setup_clocks(struct sh_mobile_lcdc_priv *priv,
+				       int clock_source)
 {
 	struct clk *clk;
 	char *str;
@@ -214,9 +213,9 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 	if (str == NULL)
 		return 0;
 
-	clk = clk_get(&pdev->dev, str);
+	clk = clk_get(priv->dev, str);
 	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "cannot get dot clock %s\n", str);
+		dev_err(priv->dev, "cannot get dot clock %s\n", str);
 		return PTR_ERR(clk);
 	}
 
@@ -1563,8 +1562,9 @@ static int __devinit sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *
 	return 0;
 }
 
-static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
-						 struct device *dev)
+static int __devinit
+sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
+			    struct sh_mobile_lcdc_chan *ch)
 {
 	struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
 	const struct fb_videomode *max_mode;
@@ -1580,9 +1580,9 @@ static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 	mutex_init(&ch->open_lock);
 
 	/* Allocate the frame buffer device. */
-	ch->info = framebuffer_alloc(0, dev);
+	ch->info = framebuffer_alloc(0, priv->dev);
 	if (!ch->info) {
-		dev_err(dev, "unable to allocate fb_info\n");
+		dev_err(priv->dev, "unable to allocate fb_info\n");
 		return -ENOMEM;
 	}
 
@@ -1604,8 +1604,8 @@ static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 		/* NV12/NV21 buffers must have even number of lines */
 		if ((cfg->fourcc == V4L2_PIX_FMT_NV12 ||
 		     cfg->fourcc == V4L2_PIX_FMT_NV21) && (mode->yres & 0x1)) {
-			dev_err(dev, "yres must be multiple of 2 for YCbCr420 "
-				"mode.\n");
+			dev_err(priv->dev, "yres must be multiple of 2 for "
+				"YCbCr420 mode.\n");
 			return -EINVAL;
 		}
 
@@ -1618,7 +1618,7 @@ static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 	if (!max_size)
 		max_size = MAX_XRES * MAX_YRES;
 	else
-		dev_dbg(dev, "Found largest videomode %ux%u\n",
+		dev_dbg(priv->dev, "Found largest videomode %ux%u\n",
 			max_mode->xres, max_mode->yres);
 
 	/* Create the mode list. */
@@ -1669,16 +1669,17 @@ static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 	max_size = max_size * var->bits_per_pixel / 8 * 2;
 
 	/* Allocate frame buffer memory and color map. */
-	buf = dma_alloc_coherent(dev, max_size, &ch->dma_handle, GFP_KERNEL);
+	buf = dma_alloc_coherent(priv->dev, max_size, &ch->dma_handle,
+				 GFP_KERNEL);
 	if (!buf) {
-		dev_err(dev, "unable to allocate buffer\n");
+		dev_err(priv->dev, "unable to allocate buffer\n");
 		return -ENOMEM;
 	}
 
 	ret = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
 	if (ret < 0) {
-		dev_err(dev, "unable to allocate cmap\n");
-		dma_free_coherent(dev, max_size, buf, ch->dma_handle);
+		dev_err(priv->dev, "unable to allocate cmap\n");
+		dma_free_coherent(priv->dev, max_size, buf, ch->dma_handle);
 		return ret;
 	}
 
@@ -1701,7 +1702,7 @@ static int __devinit sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_chan *ch,
 	}
 
 	info->screen_base = buf;
-	info->device = dev;
+	info->device = priv->dev;
 	ch->display_var = *var;
 
 	return 0;
@@ -1795,7 +1796,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 	if (!priv->base)
 		goto err1;
 
-	error = sh_mobile_lcdc_setup_clocks(pdev, pdata->clock_source, priv);
+	error = sh_mobile_lcdc_setup_clocks(priv, pdata->clock_source);
 	if (error) {
 		dev_err(&pdev->dev, "unable to setup clocks\n");
 		goto err1;
@@ -1807,7 +1808,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 	for (i = 0; i < num_channels; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
 
-		error = sh_mobile_lcdc_channel_init(ch, &pdev->dev);
+		error = sh_mobile_lcdc_channel_init(priv, ch);
 		if (error)
 			goto err1;
 	}
@@ -1837,7 +1838,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		if (error < 0)
 			goto err1;
 
-		dev_info(info->dev, "registered %s/%s as %dx%d %dbpp.\n",
+		dev_info(&pdev->dev, "registered %s/%s as %dx%d %dbpp.\n",
 			 pdev->name, (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
 			 "mainlcd" : "sublcd", info->var.xres, info->var.yres,
 			 info->var.bits_per_pixel);
-- 
cgit v1.2.3-70-g09d2


From 37c5dcc21ddaa9f946c4d691996bb3076598b813 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Fri, 9 Sep 2011 15:45:43 +0200
Subject: fbdev: sh_mobile_lcdc: Create functions to turn the display on/off

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 53 +++++++++++++++++++++-------------------
 1 file changed, 28 insertions(+), 25 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index a805f96eb16..bd725a42192 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -224,7 +224,7 @@ static int sh_mobile_lcdc_setup_clocks(struct sh_mobile_lcdc_priv *priv,
 }
 
 /* -----------------------------------------------------------------------------
- * Sys panel and deferred I/O
+ * Display, panel and deferred I/O
  */
 
 static void lcdc_sys_write_index(void *handle, unsigned long data)
@@ -335,6 +335,27 @@ static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
 		schedule_delayed_work(&info->deferred_work, fbdefio->delay);
 }
 
+static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
+{
+	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
+
+	/* HDMI must be enabled before LCDC configuration */
+	if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
+		board_cfg->display_on(board_cfg->board_data, ch->info);
+		module_put(board_cfg->owner);
+	}
+}
+
+static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
+{
+	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
+
+	if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
+		board_cfg->display_off(board_cfg->board_data);
+		module_put(board_cfg->owner);
+	}
+}
+
 /* -----------------------------------------------------------------------------
  * Format helpers
  */
@@ -648,7 +669,6 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 {
 	struct sh_mobile_meram_info *mdev = priv->meram_dev;
-	struct sh_mobile_lcdc_board_cfg	*board_cfg;
 	struct sh_mobile_lcdc_chan *ch;
 	unsigned long tmp;
 	int ret;
@@ -665,8 +685,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	lcdc_wait_bit(priv, _LDCNT2R, LDCNT2R_BR, 0);
 
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
-		ch = &priv->ch[k];
+		struct sh_mobile_lcdc_board_cfg	*board_cfg;
 
+		ch = &priv->ch[k];
 		if (!ch->enabled)
 			continue;
 
@@ -754,11 +775,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			fb_deferred_io_init(ch->info);
 		}
 
-		board_cfg = &ch->cfg.board_cfg;
-		if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
-			board_cfg->display_on(board_cfg->board_data, ch->info);
-			module_put(board_cfg->owner);
-		}
+		sh_mobile_lcdc_display_on(ch);
 
 		if (ch->bl) {
 			ch->bl->props.power = FB_BLANK_UNBLANK;
@@ -772,7 +789,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 {
 	struct sh_mobile_lcdc_chan *ch;
-	struct sh_mobile_lcdc_board_cfg	*board_cfg;
 	int k;
 
 	/* clean up deferred io and ask board code to disable panel */
@@ -799,11 +815,7 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 			backlight_update_status(ch->bl);
 		}
 
-		board_cfg = &ch->cfg.board_cfg;
-		if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
-			board_cfg->display_off(board_cfg->board_data);
-			module_put(board_cfg->owner);
-		}
+		sh_mobile_lcdc_display_off(ch);
 
 		/* disable the meram */
 		if (ch->meram_enabled) {
@@ -1417,7 +1429,6 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 	struct fb_event *event = data;
 	struct fb_info *info = event->info;
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
 
 	if (&ch->lcdc->notifier != nb)
 		return NOTIFY_DONE;
@@ -1427,10 +1438,7 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 
 	switch(action) {
 	case FB_EVENT_SUSPEND:
-		if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
-			board_cfg->display_off(board_cfg->board_data);
-			module_put(board_cfg->owner);
-		}
+		sh_mobile_lcdc_display_off(ch);
 		sh_mobile_lcdc_stop(ch->lcdc);
 		break;
 	case FB_EVENT_RESUME:
@@ -1438,12 +1446,7 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
 		sh_mobile_fb_reconfig(info);
 		mutex_unlock(&ch->open_lock);
 
-		/* HDMI must be enabled before LCDC configuration */
-		if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
-			board_cfg->display_on(board_cfg->board_data, info);
-			module_put(board_cfg->owner);
-		}
-
+		sh_mobile_lcdc_display_on(ch);
 		sh_mobile_lcdc_start(ch->lcdc);
 	}
 
-- 
cgit v1.2.3-70-g09d2


From 12ee2502c0503c484a7df052d356e39c40b02400 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Thu, 24 Nov 2011 11:53:47 +0100
Subject: fbdev: sh_mobile_hdmi: Don't access LCDC channel in notifier callback

Instead of relying on info->par being a pointer to an LCDC channel, cast
the notifier block pointer to an sh_hdmi pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 647ba984f00..a77bbc3e9e1 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -225,6 +225,8 @@ struct sh_hdmi {
 	struct notifier_block notifier;
 };
 
+#define notifier_to_hdmi(n)	container_of(n, struct sh_hdmi, notifier)
+
 static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
 {
 	iowrite8(data, hdmi->base + reg);
@@ -1204,11 +1206,9 @@ static int sh_hdmi_notify(struct notifier_block *nb,
 {
 	struct fb_event *event = data;
 	struct fb_info *info = event->info;
-	struct sh_mobile_lcdc_chan *ch = info->par;
-	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
-	struct sh_hdmi *hdmi = board_cfg->board_data;
+	struct sh_hdmi *hdmi = notifier_to_hdmi(nb);
 
-	if (!hdmi || nb != &hdmi->notifier || hdmi->info != info)
+	if (hdmi->info != info)
 		return NOTIFY_DONE;
 
 	switch(action) {
-- 
cgit v1.2.3-70-g09d2


From 134d22eb58b72c4fe5e6ca3ebcaccd4975f06842 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Fri, 9 Sep 2011 16:08:02 +0200
Subject: sh_mobile_hdmi: Remove platform data lcd_dev field

The field is used to print debug messages only. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-ap4evb.c   |  1 -
 arch/arm/mach-shmobile/board-mackerel.c |  1 -
 drivers/video/sh_mobile_hdmi.c          | 17 +++++------------
 include/video/sh_mobile_hdmi.h          |  1 -
 4 files changed, 5 insertions(+), 15 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index eeb4d966458..adab85de847 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -856,7 +856,6 @@ static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
 
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
-	.lcd_dev = &lcdc1_device.dev,
 	.flags = HDMI_SND_SRC_SPDIF,
 	.clk_optimize_parent = ap4evb_clk_optimize,
 };
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index a2813247b45..1e022939019 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -480,7 +480,6 @@ static struct platform_device hdmi_lcdc_device = {
 
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan	= &hdmi_lcdc_info.ch[0],
-	.lcd_dev	= &hdmi_lcdc_device.dev,
 	.flags		= HDMI_SND_SRC_SPDIF,
 };
 
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index a77bbc3e9e1..ebd06515f03 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1008,11 +1008,9 @@ static void sh_hdmi_display_on(void *arg, struct fb_info *info)
 	 * FB_EVENT_FB_UNBIND notify is also called with info->lock held
 	 */
 	struct sh_hdmi *hdmi = arg;
-	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
 	struct sh_mobile_lcdc_chan *ch = info->par;
 
-	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__,
-		pdata->lcd_dev, info->state);
+	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, info->state);
 
 	/* No need to lock */
 	hdmi->info = info;
@@ -1040,9 +1038,8 @@ static void sh_hdmi_display_on(void *arg, struct fb_info *info)
 static void sh_hdmi_display_off(void *arg)
 {
 	struct sh_hdmi *hdmi = arg;
-	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
 
-	dev_dbg(hdmi->dev, "%s(%p)\n", __func__, pdata->lcd_dev);
+	dev_dbg(hdmi->dev, "%s(%p)\n", __func__, hdmi);
 	/* PS mode e->a */
 	hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
 }
@@ -1114,15 +1111,11 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 {
 	struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
 	struct fb_info *info;
-	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
 	struct sh_mobile_lcdc_chan *ch;
 	int ret;
 
-	dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__,
-		pdata->lcd_dev, hdmi->hp_state);
-
-	if (!pdata->lcd_dev)
-		return;
+	dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__, hdmi,
+		hdmi->hp_state);
 
 	mutex_lock(&hdmi->mutex);
 
@@ -1198,7 +1191,7 @@ out:
 		hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
 	mutex_unlock(&hdmi->mutex);
 
-	dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, pdata->lcd_dev);
+	dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, hdmi);
 }
 
 static int sh_hdmi_notify(struct notifier_block *nb,
diff --git a/include/video/sh_mobile_hdmi.h b/include/video/sh_mobile_hdmi.h
index b56932927d0..0b8d2cf0d51 100644
--- a/include/video/sh_mobile_hdmi.h
+++ b/include/video/sh_mobile_hdmi.h
@@ -32,7 +32,6 @@ struct clk;
 
 struct sh_mobile_hdmi_info {
 	struct sh_mobile_lcdc_chan_cfg	*lcd_chan;
-	struct device			*lcd_dev;
 	unsigned int			 flags;
 	long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq,
 				    unsigned long *parent_freq);
-- 
cgit v1.2.3-70-g09d2


From d2ccdc807baa38a6487a25099c939a82f4698953 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 18:15:36 +0200
Subject: fbdev: sh_mobile_lcdc: Add sh_mobile_lcdc_entity definition

The sh_mobile_lcdc_entity structure will be used to abstract operations
performed by transceivers (such as MIPI/DSI and HDMI).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index a58a0f38848..d79e5aa39b7 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -14,9 +14,23 @@ enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
 
 #define PALETTE_NR 16
 
-struct sh_mobile_lcdc_priv;
-struct fb_info;
 struct backlight_device;
+struct fb_info;
+struct module;
+struct sh_mobile_lcdc_entity;
+struct sh_mobile_lcdc_priv;
+
+struct sh_mobile_lcdc_entity_ops {
+	/* Display */
+	int (*display_on)(struct sh_mobile_lcdc_entity *entity,
+			  struct fb_info *info);
+	void (*display_off)(struct sh_mobile_lcdc_entity *entity);
+};
+
+struct sh_mobile_lcdc_entity {
+	struct module *owner;
+	const struct sh_mobile_lcdc_entity_ops *ops;
+};
 
 /*
  * struct sh_mobile_lcdc_chan - LCDC display channel
-- 
cgit v1.2.3-70-g09d2


From 8511ea4ad39e351767167280b0b0ac716a8f2986 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 18:27:50 +0200
Subject: fbdev: sh_mobile_hdmi: Implement sh_mobile_lcdc_entity interface

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 39 +++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index ebd06515f03..5e5f83c3159 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -208,6 +208,8 @@ enum hotplug_state {
 };
 
 struct sh_hdmi {
+	struct sh_mobile_lcdc_entity entity;
+
 	void __iomem *base;
 	enum hotplug_state hp_state;	/* hot-plug status */
 	u8 preprogrammed_vic;		/* use a pre-programmed VIC or
@@ -225,6 +227,7 @@ struct sh_hdmi {
 	struct notifier_block notifier;
 };
 
+#define entity_to_sh_hdmi(e)	container_of(e, struct sh_hdmi, entity)
 #define notifier_to_hdmi(n)	container_of(n, struct sh_hdmi, notifier)
 
 static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
@@ -1001,13 +1004,14 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
 }
 
 /* locking:	called with info->lock held, or before register_framebuffer() */
-static void sh_hdmi_display_on(void *arg, struct fb_info *info)
+static int __sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
+				struct fb_info *info)
 {
 	/*
 	 * info is guaranteed to be valid, when we are called, because our
 	 * FB_EVENT_FB_UNBIND notify is also called with info->lock held
 	 */
-	struct sh_hdmi *hdmi = arg;
+	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
 	struct sh_mobile_lcdc_chan *ch = info->par;
 
 	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, info->state);
@@ -1032,18 +1036,35 @@ static void sh_hdmi_display_on(void *arg, struct fb_info *info)
 	default:
 		hdmi->var = ch->display_var;
 	}
+
+	return 0;
+}
+
+static void sh_hdmi_display_on(void *arg, struct fb_info *info)
+{
+	__sh_hdmi_display_on(arg, info);
 }
 
 /* locking: called with info->lock held */
-static void sh_hdmi_display_off(void *arg)
+static void __sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
 {
-	struct sh_hdmi *hdmi = arg;
+	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
 
 	dev_dbg(hdmi->dev, "%s(%p)\n", __func__, hdmi);
 	/* PS mode e->a */
 	hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
 }
 
+static void sh_hdmi_display_off(void *arg)
+{
+	__sh_hdmi_display_off(arg);
+}
+
+static const struct sh_mobile_lcdc_entity_ops sh_hdmi_ops = {
+	.display_on = __sh_hdmi_display_on,
+	.display_off = __sh_hdmi_display_off,
+};
+
 static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
 {
 	struct fb_info *info = hdmi->info;
@@ -1157,7 +1178,7 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 				 */
 				info->var.width = hdmi->var.width;
 				info->var.height = hdmi->var.height;
-				sh_hdmi_display_on(hdmi, info);
+				__sh_hdmi_display_on(&hdmi->entity, info);
 			} else {
 				/* New monitor or have to wake up */
 				fb_set_suspend(info, 0);
@@ -1251,6 +1272,8 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 	mutex_init(&hdmi->mutex);
 
 	hdmi->dev = &pdev->dev;
+	hdmi->entity.owner = THIS_MODULE;
+	hdmi->entity.ops = &sh_hdmi_ops;
 
 	hdmi->hdmi_clk = clk_get(&pdev->dev, "ick");
 	if (IS_ERR(hdmi->hdmi_clk)) {
@@ -1290,12 +1313,12 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 		goto emap;
 	}
 
-	platform_set_drvdata(pdev, hdmi);
+	platform_set_drvdata(pdev, &hdmi->entity);
 
 	/* Set up LCDC callbacks */
 	board_cfg = &pdata->lcd_chan->board_cfg;
 	board_cfg->owner = THIS_MODULE;
-	board_cfg->board_data = hdmi;
+	board_cfg->board_data = &hdmi->entity;
 	board_cfg->display_on = sh_hdmi_display_on;
 	board_cfg->display_off = sh_hdmi_display_off;
 
@@ -1349,7 +1372,7 @@ egetclk:
 static int __exit sh_hdmi_remove(struct platform_device *pdev)
 {
 	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
-	struct sh_hdmi *hdmi = platform_get_drvdata(pdev);
+	struct sh_hdmi *hdmi = entity_to_sh_hdmi(platform_get_drvdata(pdev));
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct sh_mobile_lcdc_board_cfg	*board_cfg = &pdata->lcd_chan->board_cfg;
 	int irq = platform_get_irq(pdev, 0);
-- 
cgit v1.2.3-70-g09d2


From 732bbcc46c31dea5bb6dd27de331d8767e9e8530 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 18:27:50 +0200
Subject: fbdev: sh_mipi_dsi: Implement sh_mobile_lcdc_entity interface

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mipi_dsi.c | 66 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 51 insertions(+), 15 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 05151b82f40..58744fee230 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -24,6 +24,8 @@
 #include <video/sh_mipi_dsi.h>
 #include <video/sh_mobile_lcdc.h>
 
+#include "sh_mobile_lcdcfb.h"
+
 #define SYSCTRL		0x0000
 #define SYSCONF		0x0004
 #define TIMSET		0x0008
@@ -50,6 +52,8 @@
 #define MAX_SH_MIPI_DSI 2
 
 struct sh_mipi {
+	struct sh_mobile_lcdc_entity entity;
+
 	void __iomem	*base;
 	void __iomem	*linkbase;
 	struct clk	*dsit_clk;
@@ -60,6 +64,8 @@ struct sh_mipi {
 	void	(*next_display_off)(void *board_data);
 };
 
+#define to_sh_mipi(e)	container_of(e, struct sh_mipi, entity)
+
 static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
 
 /* Protect the above array */
@@ -120,7 +126,7 @@ static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
 
 static void sh_mipi_shutdown(struct platform_device *pdev)
 {
-	struct sh_mipi *mipi = platform_get_drvdata(pdev);
+	struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
 
 	sh_mipi_dsi_enable(mipi, false);
 }
@@ -392,9 +398,10 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	return 0;
 }
 
-static void mipi_display_on(void *arg, struct fb_info *info)
+static int __mipi_display_on(struct sh_mobile_lcdc_entity *entity,
+			     struct fb_info *info)
 {
-	struct sh_mipi *mipi = arg;
+	struct sh_mipi *mipi = to_sh_mipi(entity);
 	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
 	int ret;
 
@@ -410,24 +417,34 @@ static void mipi_display_on(void *arg, struct fb_info *info)
 
 	sh_mipi_dsi_enable(mipi, true);
 
-	if (mipi->next_display_on)
-		mipi->next_display_on(mipi->next_board_data, info);
-
-	return;
+	return 0;
 
 mipi_display_on_fail1:
 	pm_runtime_put_sync(&mipi->pdev->dev);
 mipi_display_on_fail2:
 	pdata->set_dot_clock(mipi->pdev, mipi->base, 0);
+
+	return ret;
 }
 
-static void mipi_display_off(void *arg)
+static void mipi_display_on(void *arg, struct fb_info *info)
 {
-	struct sh_mipi *mipi = arg;
-	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
+	struct sh_mobile_lcdc_entity *entity = arg;
+	struct sh_mipi *mipi = to_sh_mipi(entity);
+	int ret;
 
-	if (mipi->next_display_off)
-		mipi->next_display_off(mipi->next_board_data);
+	ret = __mipi_display_on(entity, info);
+	if (ret < 0)
+		return;
+
+	if (mipi->next_display_on)
+		mipi->next_display_on(mipi->next_board_data, info);
+}
+
+static void __mipi_display_off(struct sh_mobile_lcdc_entity *entity)
+{
+	struct sh_mipi *mipi = to_sh_mipi(entity);
+	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
 
 	sh_mipi_dsi_enable(mipi, false);
 
@@ -436,6 +453,22 @@ static void mipi_display_off(void *arg)
 	pm_runtime_put_sync(&mipi->pdev->dev);
 }
 
+static void mipi_display_off(void *arg)
+{
+	struct sh_mobile_lcdc_entity *entity = arg;
+	struct sh_mipi *mipi = to_sh_mipi(entity);
+
+	if (mipi->next_display_off)
+		mipi->next_display_off(mipi->next_board_data);
+
+	__mipi_display_off(entity);
+}
+
+static const struct sh_mobile_lcdc_entity_ops mipi_ops = {
+	.display_on = __mipi_display_on,
+	.display_off = __mipi_display_off,
+};
+
 static int __init sh_mipi_probe(struct platform_device *pdev)
 {
 	struct sh_mipi *mipi;
@@ -467,6 +500,9 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 		goto ealloc;
 	}
 
+	mipi->entity.owner = THIS_MODULE;
+	mipi->entity.ops = &mipi_ops;
+
 	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
 		dev_err(&pdev->dev, "MIPI register region already claimed\n");
 		ret = -EBUSY;
@@ -521,7 +557,7 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 	pm_runtime_resume(&pdev->dev);
 
 	mutex_unlock(&array_lock);
-	platform_set_drvdata(pdev, mipi);
+	platform_set_drvdata(pdev, &mipi->entity);
 
 	/* Save original LCDC callbacks */
 	mipi->next_board_data = pdata->lcd_chan->board_cfg.board_data;
@@ -529,7 +565,7 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 	mipi->next_display_off = pdata->lcd_chan->board_cfg.display_off;
 
 	/* Set up LCDC callbacks */
-	pdata->lcd_chan->board_cfg.board_data = mipi;
+	pdata->lcd_chan->board_cfg.board_data = &mipi->entity;
 	pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
 	pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
 	pdata->lcd_chan->board_cfg.owner = THIS_MODULE;
@@ -561,7 +597,7 @@ static int __exit sh_mipi_remove(struct platform_device *pdev)
 	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	struct sh_mipi *mipi = platform_get_drvdata(pdev);
+	struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
 	int i, ret;
 
 	mutex_lock(&array_lock);
-- 
cgit v1.2.3-70-g09d2


From 9a2985e7f943678154f5761dad753f1987c2fdd0 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 22:59:04 +0200
Subject: fbdev: sh_mobile_lcdc: Handle HDMI/MIPI transmitter device directly

Pass a pointer to the transmitter device through platform data, retrieve
the corresponding sh_mobile_lcdc_entity structure in the probe method
and call the transmitter display_on/off methods directly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 31 ++++++++++++++++++++++++++-----
 drivers/video/sh_mobile_lcdcfb.h |  2 ++
 include/video/sh_mobile_lcdc.h   |  2 ++
 3 files changed, 30 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index bd725a42192..a2e0903466b 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -339,6 +339,11 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 {
 	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
 
+	if (ch->tx_dev) {
+		if (ch->tx_dev->ops->display_on(ch->tx_dev, ch->info) < 0)
+			return;
+	}
+
 	/* HDMI must be enabled before LCDC configuration */
 	if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
 		board_cfg->display_on(board_cfg->board_data, ch->info);
@@ -354,6 +359,9 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 		board_cfg->display_off(board_cfg->board_data);
 		module_put(board_cfg->owner);
 	}
+
+	if (ch->tx_dev)
+		ch->tx_dev->ops->display_off(ch->tx_dev);
 }
 
 /* -----------------------------------------------------------------------------
@@ -1490,18 +1498,21 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	sh_mobile_lcdc_stop(priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
-		info = priv->ch[i].info;
+		struct sh_mobile_lcdc_chan *ch = &priv->ch[i];
 
+		info = ch->info;
 		if (!info || !info->device)
 			continue;
 
-		if (priv->ch[i].sglist)
-			vfree(priv->ch[i].sglist);
+		if (ch->tx_dev)
+			module_put(ch->cfg.tx_dev->dev.driver->owner);
+
+		if (ch->sglist)
+			vfree(ch->sglist);
 
 		if (info->screen_base)
 			dma_free_coherent(&pdev->dev, info->fix.smem_len,
-					  info->screen_base,
-					  priv->ch[i].dma_handle);
+					  info->screen_base, ch->dma_handle);
 		fb_dealloc_cmap(&info->cmap);
 		framebuffer_release(info);
 	}
@@ -1595,6 +1606,16 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	info->pseudo_palette = &ch->pseudo_palette;
 	info->flags = FBINFO_FLAG_DEFAULT;
 
+	if (cfg->tx_dev) {
+		if (!cfg->tx_dev->dev.driver ||
+		    !try_module_get(cfg->tx_dev->dev.driver->owner)) {
+			dev_warn(priv->dev,
+				 "unable to get transmitter device\n");
+			return -EINVAL;
+		}
+		ch->tx_dev = platform_get_drvdata(cfg->tx_dev);
+	}
+
 	/* Iterate through the modes to validate them and find the highest
 	 * resolution.
 	 */
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index d79e5aa39b7..9601b929a40 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -41,6 +41,8 @@ struct sh_mobile_lcdc_entity {
  */
 struct sh_mobile_lcdc_chan {
 	struct sh_mobile_lcdc_priv *lcdc;
+	struct sh_mobile_lcdc_entity *tx_dev;
+
 	unsigned long *reg_offs;
 	unsigned long ldmt1r_value;
 	unsigned long enabled; /* ME and SE in LDCNT2R */
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index fe30b759c51..3681cf62a88 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -186,6 +186,8 @@ struct sh_mobile_lcdc_chan_cfg {
 	struct sh_mobile_lcdc_bl_info bl_info;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
 	struct sh_mobile_meram_cfg *meram_cfg;
+
+	struct platform_device *tx_dev;	/* HDMI/DSI transmitter device */
 };
 
 struct sh_mobile_lcdc_info {
-- 
cgit v1.2.3-70-g09d2


From d2c594a014563175b54115d1a73b607aaeb650ec Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 18:27:50 +0200
Subject: fbdev: sh_mipi_dsi: Don't hook up into board_cfg display operations

The display_on/off operations are now accessed through the
sh_mobile_lcdc_entity operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mipi_dsi.c | 56 ++++-----------------------------------------
 1 file changed, 5 insertions(+), 51 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 58744fee230..ad09a05afd5 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -58,10 +58,6 @@ struct sh_mipi {
 	void __iomem	*linkbase;
 	struct clk	*dsit_clk;
 	struct platform_device *pdev;
-
-	void	*next_board_data;
-	void	(*next_display_on)(void *board_data, struct fb_info *info);
-	void	(*next_display_off)(void *board_data);
 };
 
 #define to_sh_mipi(e)	container_of(e, struct sh_mipi, entity)
@@ -398,8 +394,8 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	return 0;
 }
 
-static int __mipi_display_on(struct sh_mobile_lcdc_entity *entity,
-			     struct fb_info *info)
+static int mipi_display_on(struct sh_mobile_lcdc_entity *entity,
+			   struct fb_info *info)
 {
 	struct sh_mipi *mipi = to_sh_mipi(entity);
 	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
@@ -427,21 +423,7 @@ mipi_display_on_fail2:
 	return ret;
 }
 
-static void mipi_display_on(void *arg, struct fb_info *info)
-{
-	struct sh_mobile_lcdc_entity *entity = arg;
-	struct sh_mipi *mipi = to_sh_mipi(entity);
-	int ret;
-
-	ret = __mipi_display_on(entity, info);
-	if (ret < 0)
-		return;
-
-	if (mipi->next_display_on)
-		mipi->next_display_on(mipi->next_board_data, info);
-}
-
-static void __mipi_display_off(struct sh_mobile_lcdc_entity *entity)
+static void mipi_display_off(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_mipi *mipi = to_sh_mipi(entity);
 	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
@@ -453,20 +435,9 @@ static void __mipi_display_off(struct sh_mobile_lcdc_entity *entity)
 	pm_runtime_put_sync(&mipi->pdev->dev);
 }
 
-static void mipi_display_off(void *arg)
-{
-	struct sh_mobile_lcdc_entity *entity = arg;
-	struct sh_mipi *mipi = to_sh_mipi(entity);
-
-	if (mipi->next_display_off)
-		mipi->next_display_off(mipi->next_board_data);
-
-	__mipi_display_off(entity);
-}
-
 static const struct sh_mobile_lcdc_entity_ops mipi_ops = {
-	.display_on = __mipi_display_on,
-	.display_off = __mipi_display_off,
+	.display_on = mipi_display_on,
+	.display_off = mipi_display_off,
 };
 
 static int __init sh_mipi_probe(struct platform_device *pdev)
@@ -559,17 +530,6 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 	mutex_unlock(&array_lock);
 	platform_set_drvdata(pdev, &mipi->entity);
 
-	/* Save original LCDC callbacks */
-	mipi->next_board_data = pdata->lcd_chan->board_cfg.board_data;
-	mipi->next_display_on = pdata->lcd_chan->board_cfg.display_on;
-	mipi->next_display_off = pdata->lcd_chan->board_cfg.display_off;
-
-	/* Set up LCDC callbacks */
-	pdata->lcd_chan->board_cfg.board_data = &mipi->entity;
-	pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
-	pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
-	pdata->lcd_chan->board_cfg.owner = THIS_MODULE;
-
 	return 0;
 
 eclkton:
@@ -594,7 +554,6 @@ efindslot:
 
 static int __exit sh_mipi_remove(struct platform_device *pdev)
 {
-	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	struct sh_mipi *mipi = to_sh_mipi(platform_get_drvdata(pdev));
@@ -617,11 +576,6 @@ static int __exit sh_mipi_remove(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	pdata->lcd_chan->board_cfg.owner = NULL;
-	pdata->lcd_chan->board_cfg.display_on = NULL;
-	pdata->lcd_chan->board_cfg.display_off = NULL;
-	pdata->lcd_chan->board_cfg.board_data = NULL;
-
 	pm_runtime_disable(&pdev->dev);
 	clk_disable(mipi->dsit_clk);
 	clk_put(mipi->dsit_clk);
-- 
cgit v1.2.3-70-g09d2


From db85905ad95b090941dc894b7f93f9f3818bdc07 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 18:27:50 +0200
Subject: fbdev: sh_mobile_hdmi: Don't hook up into board_cfg display
 operations

The display_on/off operations are now accessed through the
sh_mobile_lcdc_entity operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 37 ++++++-------------------------------
 1 file changed, 6 insertions(+), 31 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 5e5f83c3159..3f4e4a4c1cd 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1004,8 +1004,8 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
 }
 
 /* locking:	called with info->lock held, or before register_framebuffer() */
-static int __sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
-				struct fb_info *info)
+static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
+			      struct fb_info *info)
 {
 	/*
 	 * info is guaranteed to be valid, when we are called, because our
@@ -1040,13 +1040,8 @@ static int __sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
 	return 0;
 }
 
-static void sh_hdmi_display_on(void *arg, struct fb_info *info)
-{
-	__sh_hdmi_display_on(arg, info);
-}
-
 /* locking: called with info->lock held */
-static void __sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
+static void sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
 
@@ -1055,14 +1050,9 @@ static void __sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
 	hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
 }
 
-static void sh_hdmi_display_off(void *arg)
-{
-	__sh_hdmi_display_off(arg);
-}
-
 static const struct sh_mobile_lcdc_entity_ops sh_hdmi_ops = {
-	.display_on = __sh_hdmi_display_on,
-	.display_off = __sh_hdmi_display_off,
+	.display_on = sh_hdmi_display_on,
+	.display_off = sh_hdmi_display_off,
 };
 
 static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
@@ -1178,7 +1168,7 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 				 */
 				info->var.width = hdmi->var.width;
 				info->var.height = hdmi->var.height;
-				__sh_hdmi_display_on(&hdmi->entity, info);
+				sh_hdmi_display_on(&hdmi->entity, info);
 			} else {
 				/* New monitor or have to wake up */
 				fb_set_suspend(info, 0);
@@ -1255,7 +1245,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 {
 	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct sh_mobile_lcdc_board_cfg	*board_cfg;
 	int irq = platform_get_irq(pdev, 0), ret;
 	struct sh_hdmi *hdmi;
 	long rate;
@@ -1315,13 +1304,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &hdmi->entity);
 
-	/* Set up LCDC callbacks */
-	board_cfg = &pdata->lcd_chan->board_cfg;
-	board_cfg->owner = THIS_MODULE;
-	board_cfg->board_data = &hdmi->entity;
-	board_cfg->display_on = sh_hdmi_display_on;
-	board_cfg->display_off = sh_hdmi_display_off;
-
 	INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
 
 	pm_runtime_enable(&pdev->dev);
@@ -1371,21 +1353,14 @@ egetclk:
 
 static int __exit sh_hdmi_remove(struct platform_device *pdev)
 {
-	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(platform_get_drvdata(pdev));
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct sh_mobile_lcdc_board_cfg	*board_cfg = &pdata->lcd_chan->board_cfg;
 	int irq = platform_get_irq(pdev, 0);
 
 	snd_soc_unregister_codec(&pdev->dev);
 
 	fb_unregister_client(&hdmi->notifier);
 
-	board_cfg->display_on = NULL;
-	board_cfg->display_off = NULL;
-	board_cfg->board_data = NULL;
-	board_cfg->owner = NULL;
-
 	/* No new work will be scheduled, wait for running ISR */
 	free_irq(irq, hdmi);
 	/* Wait for already scheduled work */
-- 
cgit v1.2.3-70-g09d2


From aa7b5b0b2db6d33a8104e411cb74c15a4983b286 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 22:59:04 +0200
Subject: fbdev: sh_mobile_lcdc: Remove board configuration owner field

The field is unused, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 8 ++------
 include/video/sh_mobile_lcdc.h   | 2 --
 2 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index a2e0903466b..a899b6df46c 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -345,20 +345,16 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 	}
 
 	/* HDMI must be enabled before LCDC configuration */
-	if (board_cfg->display_on && try_module_get(board_cfg->owner)) {
+	if (board_cfg->display_on)
 		board_cfg->display_on(board_cfg->board_data, ch->info);
-		module_put(board_cfg->owner);
-	}
 }
 
 static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 {
 	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
 
-	if (board_cfg->display_off && try_module_get(board_cfg->owner)) {
+	if (board_cfg->display_off)
 		board_cfg->display_off(board_cfg->board_data);
-		module_put(board_cfg->owner);
-	}
 
 	if (ch->tx_dev)
 		ch->tx_dev->ops->display_off(ch->tx_dev);
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 3681cf62a88..163f4b704bf 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -147,9 +147,7 @@ struct sh_mobile_lcdc_sys_bus_ops {
 	unsigned long (*read_data)(void *handle);
 };
 
-struct module;
 struct sh_mobile_lcdc_board_cfg {
-	struct module *owner;
 	void *board_data;
 	int (*setup_sys)(void *board_data, void *sys_ops_handle,
 			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-- 
cgit v1.2.3-70-g09d2


From 018882aa66f5110478edc14e6c3fecc2b46ca0c0 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 22:59:04 +0200
Subject: fbdev: sh_mobile_lcdc: Remove board configuration board_data field

The field is unused, remove it. Update board code accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-ag5evm.c       | 14 ++------------
 arch/arm/mach-shmobile/board-mackerel.c     |  4 ++--
 arch/sh/boards/mach-ap325rxa/setup.c        |  8 ++++----
 arch/sh/boards/mach-ecovec24/setup.c        |  4 ++--
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c     | 10 ++++------
 arch/sh/boards/mach-migor/lcd_qvga.c        |  3 +--
 arch/sh/boards/mach-se/7724/setup.c         |  2 --
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h | 16 ++++++++--------
 arch/sh/include/mach-migor/mach/migor.h     |  2 +-
 drivers/video/sh_mobile_lcdcfb.c            | 16 +++++++---------
 include/video/sh_mobile_lcdc.h              | 13 ++++++-------
 11 files changed, 37 insertions(+), 55 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 068b754bc34..7108c5da607 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -229,16 +229,6 @@ static void lcd_backlight_reset(void)
 	gpio_set_value(GPIO_PORT235, 1);
 }
 
-static void lcd_on(void *board_data, struct fb_info *info)
-{
-	lcd_backlight_on();
-}
-
-static void lcd_off(void *board_data)
-{
-	lcd_backlight_reset();
-}
-
 /* LCDC0 */
 static const struct fb_videomode lcdc0_modes[] = {
 	{
@@ -268,8 +258,8 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.lcd_cfg = lcdc0_modes,
 		.num_cfg = ARRAY_SIZE(lcdc0_modes),
 		.board_cfg = {
-			.display_on = lcd_on,
-			.display_off = lcd_off,
+			.display_on = lcd_backlight_on,
+			.display_off = lcd_backlight_reset,
 		},
 	}
 };
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f275a817939..d366e7873a3 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -351,14 +351,14 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
 	},
 };
 
-static int mackerel_set_brightness(void *board_data, int brightness)
+static int mackerel_set_brightness(int brightness)
 {
 	gpio_set_value(GPIO_PORT31, brightness);
 
 	return 0;
 }
 
-static int mackerel_get_brightness(void *board_data)
+static int mackerel_get_brightness(void)
 {
 	return gpio_get_value(GPIO_PORT31);
 }
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index ebd0f818a25..edc1d1bbfa7 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -157,7 +157,7 @@ static struct platform_device nand_flash_device = {
 #define PORT_DRVCRA	0xA405018A
 #define PORT_DRVCRB	0xA405018C
 
-static int ap320_wvga_set_brightness(void *board_data, int brightness)
+static int ap320_wvga_set_brightness(int brightness)
 {
 	if (brightness) {
 		gpio_set_value(GPIO_PTS3, 0);
@@ -170,12 +170,12 @@ static int ap320_wvga_set_brightness(void *board_data, int brightness)
 	return 0;
 }
 
-static int ap320_wvga_get_brightness(void *board_data)
+static int ap320_wvga_get_brightness(void)
 {
 	return gpio_get_value(GPIO_PTS3);
 }
 
-static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
+static void ap320_wvga_power_on(void)
 {
 	msleep(100);
 
@@ -183,7 +183,7 @@ static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
 	__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
 }
 
-static void ap320_wvga_power_off(void *board_data)
+static void ap320_wvga_power_off(void)
 {
 	/* ASD AP-320/325 LCD OFF */
 	__raw_writew(0, FPGA_LCDREG);
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index cde7c0085ce..7ed3061e01d 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -310,14 +310,14 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
-static int ecovec24_set_brightness(void *board_data, int brightness)
+static int ecovec24_set_brightness(int brightness)
 {
 	gpio_set_value(GPIO_PTR1, brightness);
 
 	return 0;
 }
 
-static int ecovec24_get_brightness(void *board_data)
+static int ecovec24_get_brightness(void)
 {
 	return gpio_get_value(GPIO_PTR1);
 }
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
index 25e145fb708..c148b36ecb6 100644
--- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -251,8 +251,7 @@ static void display_on(void *sohandle,
 	write_memory_start(sohandle, so);
 }
 
-int kfr2r09_lcd_setup(void *board_data, void *sohandle,
-		      struct sh_mobile_lcdc_sys_bus_ops *so)
+int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	/* power on */
 	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
@@ -273,8 +272,7 @@ int kfr2r09_lcd_setup(void *board_data, void *sohandle,
 	return 0;
 }
 
-void kfr2r09_lcd_start(void *board_data, void *sohandle,
-		       struct sh_mobile_lcdc_sys_bus_ops *so)
+void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	write_memory_start(sohandle, so);
 }
@@ -327,12 +325,12 @@ static int kfr2r09_lcd_backlight(int on)
 	return 0;
 }
 
-void kfr2r09_lcd_on(void *board_data, struct fb_info *info)
+void kfr2r09_lcd_on(void)
 {
 	kfr2r09_lcd_backlight(1);
 }
 
-void kfr2r09_lcd_off(void *board_data)
+void kfr2r09_lcd_off(void)
 {
 	kfr2r09_lcd_backlight(0);
 }
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
index de9014a8a93..8bccd345b69 100644
--- a/arch/sh/boards/mach-migor/lcd_qvga.c
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -113,8 +113,7 @@ static const unsigned short magic3_data[] = {
 	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
 };
 
-int migor_lcd_qvga_setup(void *board_data, void *sohandle,
-			 struct sh_mobile_lcdc_sys_bus_ops *so)
+int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	unsigned long xres = 320;
 	unsigned long yres = 240;
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 2b07fc01695..5e25dbe726e 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -186,8 +186,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width = 152,
 			.height = 91,
 		},
-		.board_cfg = {
-		},
 	}
 };
 
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
index 07e635b0e04..ba3d93d333f 100644
--- a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -4,21 +4,21 @@
 #include <video/sh_mobile_lcdc.h>
 
 #if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-void kfr2r09_lcd_on(void *board_data, struct fb_info *info);
-void kfr2r09_lcd_off(void *board_data);
-int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+void kfr2r09_lcd_on(void);
+void kfr2r09_lcd_off(void);
+int kfr2r09_lcd_setup(void *sys_ops_handle,
 		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
+void kfr2r09_lcd_start(void *sys_ops_handle,
 		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 #else
-static void kfr2r09_lcd_on(void *board_data) {}
-static void kfr2r09_lcd_off(void *board_data) {}
-static int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+static void kfr2r09_lcd_on(void) {}
+static void kfr2r09_lcd_off(void) {}
+static int kfr2r09_lcd_setup(void *sys_ops_handle,
 				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
 	return -ENODEV;
 }
-static void kfr2r09_lcd_start(void *board_data, void *sys_ops_handle,
+static void kfr2r09_lcd_start(void *sys_ops_handle,
 				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {
 }
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
index 42fccf93412..7de7bb74c29 100644
--- a/arch/sh/include/mach-migor/mach/migor.h
+++ b/arch/sh/include/mach-migor/mach/migor.h
@@ -9,7 +9,7 @@
 
 #include <video/sh_mobile_lcdc.h>
 
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+int migor_lcd_qvga_setup(void *sys_ops_handle,
 			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 
 #endif /* __ASM_SH_MIGOR_H */
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index a899b6df46c..c54eb973de2 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -315,14 +315,12 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 		/* trigger panel update */
 		dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 		if (bcfg->start_transfer)
-			bcfg->start_transfer(bcfg->board_data, ch,
-					     &sh_mobile_lcdc_sys_bus_ops);
+			bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
 		lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
 		dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 	} else {
 		if (bcfg->start_transfer)
-			bcfg->start_transfer(bcfg->board_data, ch,
-					     &sh_mobile_lcdc_sys_bus_ops);
+			bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
 		lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
 	}
 }
@@ -346,7 +344,7 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 
 	/* HDMI must be enabled before LCDC configuration */
 	if (board_cfg->display_on)
-		board_cfg->display_on(board_cfg->board_data, ch->info);
+		board_cfg->display_on();
 }
 
 static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
@@ -354,7 +352,7 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
 
 	if (board_cfg->display_off)
-		board_cfg->display_off(board_cfg->board_data);
+		board_cfg->display_off();
 
 	if (ch->tx_dev)
 		ch->tx_dev->ops->display_off(ch->tx_dev);
@@ -697,7 +695,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 		board_cfg = &ch->cfg.board_cfg;
 		if (board_cfg->setup_sys) {
-			ret = board_cfg->setup_sys(board_cfg->board_data, ch,
+			ret = board_cfg->setup_sys(ch,
 						   &sh_mobile_lcdc_sys_bus_ops);
 			if (ret)
 				return ret;
@@ -1326,7 +1324,7 @@ static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
 	    bdev->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 		brightness = 0;
 
-	return cfg->set_brightness(cfg->board_data, brightness);
+	return cfg->set_brightness(brightness);
 }
 
 static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
@@ -1334,7 +1332,7 @@ static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
 	struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
 	struct sh_mobile_lcdc_board_cfg *cfg = &ch->cfg.board_cfg;
 
-	return cfg->get_brightness(cfg->board_data);
+	return cfg->get_brightness();
 }
 
 static int sh_mobile_lcdc_check_fb(struct backlight_device *bdev,
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 163f4b704bf..62be2c933e9 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -148,15 +148,14 @@ struct sh_mobile_lcdc_sys_bus_ops {
 };
 
 struct sh_mobile_lcdc_board_cfg {
-	void *board_data;
-	int (*setup_sys)(void *board_data, void *sys_ops_handle,
+	int (*setup_sys)(void *sys_ops_handle,
 			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-	void (*start_transfer)(void *board_data, void *sys_ops_handle,
+	void (*start_transfer)(void *sys_ops_handle,
 			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-	void (*display_on)(void *board_data, struct fb_info *info);
-	void (*display_off)(void *board_data);
-	int (*set_brightness)(void *board_data, int brightness);
-	int (*get_brightness)(void *board_data);
+	void (*display_on)(void);
+	void (*display_off)(void);
+	int (*set_brightness)(int brightness);
+	int (*get_brightness)(void);
 };
 
 struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
-- 
cgit v1.2.3-70-g09d2


From 43059b0f46f814b4152f327c701d079253904540 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 22:59:04 +0200
Subject: fbdev: sh_mobile_lcdc: Move brightness ops to sh_mobile_lcdc_bl_info

Update board code accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-mackerel.c | 6 ++----
 arch/sh/boards/mach-ap325rxa/setup.c    | 4 ++--
 arch/sh/boards/mach-ecovec24/setup.c    | 6 ++----
 drivers/video/sh_mobile_lcdcfb.c        | 6 ++----
 include/video/sh_mobile_lcdc.h          | 4 ++--
 5 files changed, 10 insertions(+), 16 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index d366e7873a3..123232329a8 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -391,13 +391,11 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.flags			= 0,
 		.lcd_size_cfg.width	= 152,
 		.lcd_size_cfg.height	= 91,
-		.board_cfg = {
-			.set_brightness = mackerel_set_brightness,
-			.get_brightness = mackerel_get_brightness,
-		},
 		.bl_info = {
 			.name = "sh_mobile_lcdc_bl",
 			.max_brightness = 1,
+			.set_brightness = mackerel_set_brightness,
+			.get_brightness = mackerel_get_brightness,
 		},
 		.meram_cfg = &lcd_meram_cfg,
 	}
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index edc1d1bbfa7..d0d2401c3cb 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -220,12 +220,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
 			.display_off = ap320_wvga_power_off,
-			.set_brightness = ap320_wvga_set_brightness,
-			.get_brightness = ap320_wvga_get_brightness,
 		},
 		.bl_info = {
 			.name = "sh_mobile_lcdc_bl",
 			.max_brightness = 1,
+			.set_brightness = ap320_wvga_set_brightness,
+			.get_brightness = ap320_wvga_get_brightness,
 		},
 	}
 };
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 7ed3061e01d..769aab3fa37 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -331,13 +331,11 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width = 152,
 			.height = 91,
 		},
-		.board_cfg = {
-			.set_brightness = ecovec24_set_brightness,
-			.get_brightness = ecovec24_get_brightness,
-		},
 		.bl_info = {
 			.name = "sh_mobile_lcdc_bl",
 			.max_brightness = 1,
+			.set_brightness = ecovec24_set_brightness,
+			.get_brightness = ecovec24_get_brightness,
 		},
 	}
 };
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index c54eb973de2..adfffd6b7ec 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1317,22 +1317,20 @@ static struct fb_ops sh_mobile_lcdc_ops = {
 static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
 {
 	struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
-	struct sh_mobile_lcdc_board_cfg *cfg = &ch->cfg.board_cfg;
 	int brightness = bdev->props.brightness;
 
 	if (bdev->props.power != FB_BLANK_UNBLANK ||
 	    bdev->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 		brightness = 0;
 
-	return cfg->set_brightness(brightness);
+	return ch->cfg.bl_info.set_brightness(brightness);
 }
 
 static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
 {
 	struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
-	struct sh_mobile_lcdc_board_cfg *cfg = &ch->cfg.board_cfg;
 
-	return cfg->get_brightness();
+	return ch->cfg.bl_info.get_brightness();
 }
 
 static int sh_mobile_lcdc_check_fb(struct backlight_device *bdev,
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 62be2c933e9..ecde6aad6f2 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -154,8 +154,6 @@ struct sh_mobile_lcdc_board_cfg {
 			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 	void (*display_on)(void);
 	void (*display_off)(void);
-	int (*set_brightness)(int brightness);
-	int (*get_brightness)(void);
 };
 
 struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
@@ -167,6 +165,8 @@ struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
 struct sh_mobile_lcdc_bl_info {
 	const char *name;
 	int max_brightness;
+	int (*set_brightness)(int brightness);
+	int (*get_brightness)(void);
 };
 
 struct sh_mobile_lcdc_chan_cfg {
-- 
cgit v1.2.3-70-g09d2


From afaad83b9c0d24eac88535cc5a8c6019f0c45bcb Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 11 Sep 2011 22:59:04 +0200
Subject: fbdev: sh_mobile_lcdc: Merge board_cfg and lcd_size_cfg into
 panel_cfg

Update board code accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-ag5evm.c   |  6 +++---
 arch/arm/mach-shmobile/board-ap4evb.c   |  8 ++++----
 arch/arm/mach-shmobile/board-bonito.c   |  2 +-
 arch/arm/mach-shmobile/board-mackerel.c |  6 ++++--
 arch/sh/boards/mach-ap325rxa/setup.c    |  6 ++----
 arch/sh/boards/mach-ecovec24/setup.c    |  2 +-
 arch/sh/boards/mach-kfr2r09/setup.c     |  4 +---
 arch/sh/boards/mach-migor/setup.c       |  8 +++-----
 arch/sh/boards/mach-se/7724/setup.c     |  2 +-
 drivers/video/sh_mobile_lcdcfb.c        | 35 ++++++++++++++++-----------------
 include/video/sh_mobile_lcdc.h          | 12 ++++-------
 11 files changed, 41 insertions(+), 50 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 7108c5da607..199b3b958f4 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -252,12 +252,12 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.interface_type = RGB24,
 		.clock_divider = 1,
 		.flags = LCDC_FLAGS_DWPOL,
-		.lcd_size_cfg.width = 44,
-		.lcd_size_cfg.height = 79,
 		.fourcc = V4L2_PIX_FMT_RGB565,
 		.lcd_cfg = lcdc0_modes,
 		.num_cfg = ARRAY_SIZE(lcdc0_modes),
-		.board_cfg = {
+		.panel_cfg = {
+			.width = 44,
+			.height = 79,
 			.display_on = lcd_backlight_on,
 			.display_off = lcd_backlight_reset,
 		},
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 22e19257462..2cb6c39dd62 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1360,8 +1360,8 @@ static void __init ap4evb_init(void)
 	lcdc_info.ch[0].interface_type		= RGB24;
 	lcdc_info.ch[0].clock_divider		= 1;
 	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
-	lcdc_info.ch[0].lcd_size_cfg.width	= 44;
-	lcdc_info.ch[0].lcd_size_cfg.height	= 79;
+	lcdc_info.ch[0].panel_cfg.width		= 44;
+	lcdc_info.ch[0].panel_cfg.height	= 79;
 
 	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
 
@@ -1402,8 +1402,8 @@ static void __init ap4evb_init(void)
 	lcdc_info.ch[0].interface_type		= RGB18;
 	lcdc_info.ch[0].clock_divider		= 3;
 	lcdc_info.ch[0].flags			= 0;
-	lcdc_info.ch[0].lcd_size_cfg.width	= 152;
-	lcdc_info.ch[0].lcd_size_cfg.height	= 91;
+	lcdc_info.ch[0].panel_cfg.width		= 152;
+	lcdc_info.ch[0].panel_cfg.height	= 91;
 
 	/* enable TouchScreen */
 	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 4d220162232..9cd9408b851 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -247,7 +247,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.flags			= 0,
 		.lcd_cfg		= &lcdc0_mode,
 		.num_cfg		= 1,
-		.lcd_size_cfg = {
+		.panel_cfg = {
 			.width	= 152,
 			.height = 91,
 		},
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 123232329a8..9228cc555b4 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -389,8 +389,10 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.interface_type		= RGB24,
 		.clock_divider		= 3,
 		.flags			= 0,
-		.lcd_size_cfg.width	= 152,
-		.lcd_size_cfg.height	= 91,
+		.panel_cfg = {
+			.width		= 152,
+			.height		= 91,
+		},
 		.bl_info = {
 			.name = "sh_mobile_lcdc_bl",
 			.max_brightness = 1,
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index d0d2401c3cb..a87b7f42f12 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -213,11 +213,9 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.clock_divider = 1,
 		.lcd_cfg = ap325rxa_lcdc_modes,
 		.num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
-		.lcd_size_cfg = { /* 7.0 inch */
-			.width = 152,
+		.panel_cfg = {
+			.width = 152,	/* 7.0 inch */
 			.height = 91,
-		},
-		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
 			.display_off = ap320_wvga_power_off,
 		},
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 769aab3fa37..41767451ead 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -327,7 +327,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.interface_type = RGB18,
 		.chan = LCDC_CHAN_MAINLCD,
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_size_cfg = { /* 7.0 inch */
+		.panel_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
 		},
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5b382e1afae..77d5a60d64f 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -150,11 +150,9 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 		.flags = LCDC_FLAGS_DWPOL,
 		.lcd_cfg = kfr2r09_lcdc_modes,
 		.num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
-		.lcd_size_cfg = {
+		.panel_cfg = {
 			.width = 35,
 			.height = 58,
-		},
-		.board_cfg = {
 			.setup_sys = kfr2r09_lcd_setup,
 			.start_transfer = kfr2r09_lcd_start,
 			.display_on = kfr2r09_lcd_on,
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index d37ba272052..93a1c9109ab 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -248,7 +248,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.clock_divider = 2,
 		.lcd_cfg = migor_lcd_modes,
 		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
-		.lcd_size_cfg = { /* 7.0 inch */
+		.panel_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
 		},
@@ -262,11 +262,9 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.clock_divider = 10,
 		.lcd_cfg = migor_lcd_modes,
 		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
-		.lcd_size_cfg = { /* 2.4 inch */
-			.width = 49,
+		.panel_cfg = {
+			.width = 49,	/* 2.4 inch */
 			.height = 37,
-		},
-		.board_cfg = {
 			.setup_sys = migor_lcd_qvga_setup,
 		},
 		.sys_bus_cfg = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 5e25dbe726e..a468398bfb3 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -182,7 +182,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.fourcc = V4L2_PIX_FMT_RGB565,
 		.clock_divider = 1,
-		.lcd_size_cfg = { /* 7.0 inch */
+		.panel_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
 		},
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index adfffd6b7ec..9e44988155a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -289,7 +289,7 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 				       struct list_head *pagelist)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	struct sh_mobile_lcdc_board_cfg	*bcfg = &ch->cfg.board_cfg;
+	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
 
 	/* enable clocks before accessing hardware */
 	sh_mobile_lcdc_clk_on(ch->lcdc);
@@ -314,13 +314,13 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 
 		/* trigger panel update */
 		dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
-		if (bcfg->start_transfer)
-			bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
+		if (panel->start_transfer)
+			panel->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
 		lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
 		dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 	} else {
-		if (bcfg->start_transfer)
-			bcfg->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
+		if (panel->start_transfer)
+			panel->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
 		lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
 	}
 }
@@ -335,7 +335,7 @@ static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
 
 static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 {
-	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
+	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
 
 	if (ch->tx_dev) {
 		if (ch->tx_dev->ops->display_on(ch->tx_dev, ch->info) < 0)
@@ -343,16 +343,16 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 	}
 
 	/* HDMI must be enabled before LCDC configuration */
-	if (board_cfg->display_on)
-		board_cfg->display_on();
+	if (panel->display_on)
+		panel->display_on();
 }
 
 static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 {
-	struct sh_mobile_lcdc_board_cfg	*board_cfg = &ch->cfg.board_cfg;
+	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
 
-	if (board_cfg->display_off)
-		board_cfg->display_off();
+	if (panel->display_off)
+		panel->display_off();
 
 	if (ch->tx_dev)
 		ch->tx_dev->ops->display_off(ch->tx_dev);
@@ -687,16 +687,15 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	lcdc_wait_bit(priv, _LDCNT2R, LDCNT2R_BR, 0);
 
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
-		struct sh_mobile_lcdc_board_cfg	*board_cfg;
+		struct sh_mobile_lcdc_panel_cfg *panel;
 
 		ch = &priv->ch[k];
 		if (!ch->enabled)
 			continue;
 
-		board_cfg = &ch->cfg.board_cfg;
-		if (board_cfg->setup_sys) {
-			ret = board_cfg->setup_sys(ch,
-						   &sh_mobile_lcdc_sys_bus_ops);
+		panel = &ch->cfg.panel_cfg;
+		if (panel->setup_sys) {
+			ret = panel->setup_sys(ch, &sh_mobile_lcdc_sys_bus_ops);
 			if (ret)
 				return ret;
 		}
@@ -1654,8 +1653,8 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	 */
 	var = &info->var;
 	fb_videomode_to_var(var, mode);
-	var->width = cfg->lcd_size_cfg.width;
-	var->height = cfg->lcd_size_cfg.height;
+	var->width = cfg->panel_cfg.width;
+	var->height = cfg->panel_cfg.height;
 	var->yres_virtual = var->yres * 2;
 	var->activate = FB_ACTIVATE_NOW;
 
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index ecde6aad6f2..4f0fb559ea8 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -147,7 +147,9 @@ struct sh_mobile_lcdc_sys_bus_ops {
 	unsigned long (*read_data)(void *handle);
 };
 
-struct sh_mobile_lcdc_board_cfg {
+struct sh_mobile_lcdc_panel_cfg {
+	unsigned long width;		/* Panel width in mm */
+	unsigned long height;		/* Panel height in mm */
 	int (*setup_sys)(void *sys_ops_handle,
 			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 	void (*start_transfer)(void *sys_ops_handle,
@@ -156,11 +158,6 @@ struct sh_mobile_lcdc_board_cfg {
 	void (*display_off)(void);
 };
 
-struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
-	unsigned long width;
-	unsigned long height;
-};
-
 /* backlight info */
 struct sh_mobile_lcdc_bl_info {
 	const char *name;
@@ -178,8 +175,7 @@ struct sh_mobile_lcdc_chan_cfg {
 	unsigned long flags; /* LCDC_FLAGS_... */
 	const struct fb_videomode *lcd_cfg;
 	int num_cfg;
-	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
-	struct sh_mobile_lcdc_board_cfg board_cfg;
+	struct sh_mobile_lcdc_panel_cfg panel_cfg;
 	struct sh_mobile_lcdc_bl_info bl_info;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
 	struct sh_mobile_meram_cfg *meram_cfg;
-- 
cgit v1.2.3-70-g09d2


From e34d0bbb062cc78802d0f0686c939ea1569889a6 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 18 Sep 2011 12:21:17 +0200
Subject: sh_mobile_lcdc: Add an lcdc channel pointer to sh_mobile_lcdc_entity

The field will be used by the transmitter drivers to access
sh_mobile_lcdc_chan fields such as fb_info.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 5 ++++-
 drivers/video/sh_mobile_lcdcfb.h | 2 ++
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 9e44988155a..1ecc71ec41f 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1495,8 +1495,10 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 		if (!info || !info->device)
 			continue;
 
-		if (ch->tx_dev)
+		if (ch->tx_dev) {
+			ch->tx_dev->lcdc = NULL;
 			module_put(ch->cfg.tx_dev->dev.driver->owner);
+		}
 
 		if (ch->sglist)
 			vfree(ch->sglist);
@@ -1605,6 +1607,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 			return -EINVAL;
 		}
 		ch->tx_dev = platform_get_drvdata(cfg->tx_dev);
+		ch->tx_dev->lcdc = ch;
 	}
 
 	/* Iterate through the modes to validate them and find the highest
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 9601b929a40..36cd5649598 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -19,6 +19,7 @@ struct fb_info;
 struct module;
 struct sh_mobile_lcdc_entity;
 struct sh_mobile_lcdc_priv;
+struct sh_mobile_lcdc_chan;
 
 struct sh_mobile_lcdc_entity_ops {
 	/* Display */
@@ -30,6 +31,7 @@ struct sh_mobile_lcdc_entity_ops {
 struct sh_mobile_lcdc_entity {
 	struct module *owner;
 	const struct sh_mobile_lcdc_entity_ops *ops;
+	struct sh_mobile_lcdc_chan *lcdc;
 };
 
 /*
-- 
cgit v1.2.3-70-g09d2


From bce95fe838a5ca84e57411338b953be672c2a5eb Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 18 Sep 2011 12:25:21 +0200
Subject: sh_mobile_hdmi: Use sh_mobile_lcdc_entity::channel to access fb_info

The fb_info parameter passed to the display_on operation will be
removed, don't use it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 80 +++++++-----------------------------------
 1 file changed, 12 insertions(+), 68 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 3f4e4a4c1cd..bd885ee78d5 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -219,16 +219,12 @@ struct sh_hdmi {
 	u8 edid_blocks;
 	struct clk *hdmi_clk;
 	struct device *dev;
-	struct fb_info *info;
-	struct mutex mutex;		/* Protect the info pointer */
 	struct delayed_work edid_work;
 	struct fb_var_screeninfo var;
 	struct fb_monspecs monspec;
-	struct notifier_block notifier;
 };
 
 #define entity_to_sh_hdmi(e)	container_of(e, struct sh_hdmi, entity)
-#define notifier_to_hdmi(n)	container_of(n, struct sh_hdmi, notifier)
 
 static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg)
 {
@@ -737,10 +733,11 @@ static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
 static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 			     unsigned long *parent_rate)
 {
+	struct fb_info *info = hdmi->entity.lcdc
+			     ? hdmi->entity.lcdc->info : NULL;
 	struct fb_var_screeninfo tmpvar;
 	struct fb_var_screeninfo *var = &tmpvar;
 	const struct fb_videomode *mode, *found = NULL;
-	struct fb_info *info = hdmi->info;
 	struct fb_modelist *modelist = NULL;
 	unsigned int f_width = 0, f_height = 0, f_refresh = 0;
 	unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */
@@ -1012,13 +1009,10 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
 	 * FB_EVENT_FB_UNBIND notify is also called with info->lock held
 	 */
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
-	struct sh_mobile_lcdc_chan *ch = info->par;
+	struct sh_mobile_lcdc_chan *ch = entity->lcdc;
 
 	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, info->state);
 
-	/* No need to lock */
-	hdmi->info = info;
-
 	/*
 	 * hp_state can be set to
 	 * HDMI_HOTPLUG_DISCONNECTED:	on monitor unplug
@@ -1040,7 +1034,6 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
 	return 0;
 }
 
-/* locking: called with info->lock held */
 static void sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
@@ -1057,15 +1050,14 @@ static const struct sh_mobile_lcdc_entity_ops sh_hdmi_ops = {
 
 static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
 {
-	struct fb_info *info = hdmi->info;
-	struct sh_mobile_lcdc_chan *ch = info->par;
+	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
 	struct fb_var_screeninfo *new_var = &hdmi->var, *old_var = &ch->display_var;
 	struct fb_videomode mode1, mode2;
 
 	fb_var_to_videomode(&mode1, old_var);
 	fb_var_to_videomode(&mode2, new_var);
 
-	dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
+	dev_dbg(hdmi->dev, "Old %ux%u, new %ux%u\n",
 		mode1.xres, mode1.yres, mode2.xres, mode2.yres);
 
 	if (fb_mode_is_equal(&mode1, &mode2)) {
@@ -1075,7 +1067,7 @@ static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
 		return false;
 	}
 
-	dev_dbg(info->dev, "Switching %u -> %u lines\n",
+	dev_dbg(hdmi->dev, "Switching %u -> %u lines\n",
 		mode1.yres, mode2.yres);
 	*old_var = *new_var;
 
@@ -1121,17 +1113,13 @@ static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long hdmi_rate,
 static void sh_hdmi_edid_work_fn(struct work_struct *work)
 {
 	struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
+	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
 	struct fb_info *info;
-	struct sh_mobile_lcdc_chan *ch;
 	int ret;
 
 	dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__, hdmi,
 		hdmi->hp_state);
 
-	mutex_lock(&hdmi->mutex);
-
-	info = hdmi->info;
-
 	if (hdmi->hp_state == HDMI_HOTPLUG_CONNECTED) {
 		unsigned long parent_rate = 0, hdmi_rate;
 
@@ -1151,10 +1139,10 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 		/* Switched to another (d) power-save mode */
 		msleep(10);
 
-		if (!info)
+		if (ch == NULL)
 			goto out;
 
-		ch = info->par;
+		info = ch->info;
 
 		if (lock_fb_info(info)) {
 			console_lock();
@@ -1179,9 +1167,11 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 		}
 	} else {
 		ret = 0;
-		if (!info)
+		if (ch == NULL)
 			goto out;
 
+		info = ch->info;
+
 		hdmi->monspec.modedb_len = 0;
 		fb_destroy_modedb(hdmi->monspec.modedb);
 		hdmi->monspec.modedb = NULL;
@@ -1200,47 +1190,10 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 out:
 	if (ret < 0 && ret != -EAGAIN)
 		hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
-	mutex_unlock(&hdmi->mutex);
 
 	dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, hdmi);
 }
 
-static int sh_hdmi_notify(struct notifier_block *nb,
-			  unsigned long action, void *data)
-{
-	struct fb_event *event = data;
-	struct fb_info *info = event->info;
-	struct sh_hdmi *hdmi = notifier_to_hdmi(nb);
-
-	if (hdmi->info != info)
-		return NOTIFY_DONE;
-
-	switch(action) {
-	case FB_EVENT_FB_REGISTERED:
-		/* Unneeded, activation taken care by sh_hdmi_display_on() */
-		break;
-	case FB_EVENT_FB_UNREGISTERED:
-		/*
-		 * We are called from unregister_framebuffer() with the
-		 * info->lock held. This is bad for us, because we can race with
-		 * the scheduled work, which has to call fb_set_suspend(), which
-		 * takes info->lock internally, so, sh_hdmi_edid_work_fn()
-		 * cannot take and hold info->lock for the whole function
-		 * duration. Using an additional lock creates a classical AB-BA
-		 * lock up. Therefore, we have to release the info->lock
-		 * temporarily, synchronise with the work queue and re-acquire
-		 * the info->lock.
-		 */
-		unlock_fb_info(info);
-		mutex_lock(&hdmi->mutex);
-		hdmi->info = NULL;
-		mutex_unlock(&hdmi->mutex);
-		lock_fb_info(info);
-		return NOTIFY_OK;
-	}
-	return NOTIFY_DONE;
-}
-
 static int __init sh_hdmi_probe(struct platform_device *pdev)
 {
 	struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data;
@@ -1258,8 +1211,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	mutex_init(&hdmi->mutex);
-
 	hdmi->dev = &pdev->dev;
 	hdmi->entity.owner = THIS_MODULE;
 	hdmi->entity.ops = &sh_hdmi_ops;
@@ -1327,9 +1278,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 		goto ecodec;
 	}
 
-	hdmi->notifier.notifier_call = sh_hdmi_notify;
-	fb_register_client(&hdmi->notifier);
-
 	return 0;
 
 ecodec:
@@ -1345,7 +1293,6 @@ ereqreg:
 erate:
 	clk_put(hdmi->hdmi_clk);
 egetclk:
-	mutex_destroy(&hdmi->mutex);
 	kfree(hdmi);
 
 	return ret;
@@ -1359,8 +1306,6 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
 
 	snd_soc_unregister_codec(&pdev->dev);
 
-	fb_unregister_client(&hdmi->notifier);
-
 	/* No new work will be scheduled, wait for running ISR */
 	free_irq(irq, hdmi);
 	/* Wait for already scheduled work */
@@ -1371,7 +1316,6 @@ static int __exit sh_hdmi_remove(struct platform_device *pdev)
 	clk_put(hdmi->hdmi_clk);
 	iounmap(hdmi->base);
 	release_mem_region(res->start, resource_size(res));
-	mutex_destroy(&hdmi->mutex);
 	kfree(hdmi);
 
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 5864ace19a2546912308e94432c1cf52d5945afe Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 18 Sep 2011 12:26:50 +0200
Subject: fbdev: sh_mobile_lcdc: Remove fb_info parameter to display_on
 operation

The parameter is unused, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mipi_dsi.c      |  3 +--
 drivers/video/sh_mobile_hdmi.c   | 11 +++--------
 drivers/video/sh_mobile_lcdcfb.c |  2 +-
 drivers/video/sh_mobile_lcdcfb.h |  3 +--
 4 files changed, 6 insertions(+), 13 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index ad09a05afd5..1ede247547f 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -394,8 +394,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	return 0;
 }
 
-static int mipi_display_on(struct sh_mobile_lcdc_entity *entity,
-			   struct fb_info *info)
+static int mipi_display_on(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_mipi *mipi = to_sh_mipi(entity);
 	struct sh_mipi_dsi_info *pdata = mipi->pdev->dev.platform_data;
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index bd885ee78d5..c22e123ec40 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1000,16 +1000,11 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* locking:	called with info->lock held, or before register_framebuffer() */
-static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity,
-			      struct fb_info *info)
+static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 {
-	/*
-	 * info is guaranteed to be valid, when we are called, because our
-	 * FB_EVENT_FB_UNBIND notify is also called with info->lock held
-	 */
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
 	struct sh_mobile_lcdc_chan *ch = entity->lcdc;
+	struct fb_info *info = ch->info;
 
 	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, info->state);
 
@@ -1156,7 +1151,7 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 				 */
 				info->var.width = hdmi->var.width;
 				info->var.height = hdmi->var.height;
-				sh_hdmi_display_on(&hdmi->entity, info);
+				sh_hdmi_display_on(&hdmi->entity);
 			} else {
 				/* New monitor or have to wake up */
 				fb_set_suspend(info, 0);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 1ecc71ec41f..03ee3826fb6 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -338,7 +338,7 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
 
 	if (ch->tx_dev) {
-		if (ch->tx_dev->ops->display_on(ch->tx_dev, ch->info) < 0)
+		if (ch->tx_dev->ops->display_on(ch->tx_dev) < 0)
 			return;
 	}
 
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 36cd5649598..b2cb8e6d098 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -23,8 +23,7 @@ struct sh_mobile_lcdc_chan;
 
 struct sh_mobile_lcdc_entity_ops {
 	/* Display */
-	int (*display_on)(struct sh_mobile_lcdc_entity *entity,
-			  struct fb_info *info);
+	int (*display_on)(struct sh_mobile_lcdc_entity *entity);
 	void (*display_off)(struct sh_mobile_lcdc_entity *entity);
 };
 
-- 
cgit v1.2.3-70-g09d2


From 458981c3886133667e020900f53538f1fbc3ea1d Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 28 Nov 2011 23:19:59 +0100
Subject: fbdev: sh_mobile_lcdc: Return display connection state in display_on

Return true if the display is connected and false otherwise. Set the fb
info state to FBINFO_STATE_SUSPENDED in the sh_mobile_lcdc driver when
the display is not connected.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mipi_dsi.c      | 2 +-
 drivers/video/sh_mobile_hdmi.c   | 9 +++++----
 drivers/video/sh_mobile_lcdcfb.c | 8 +++++++-
 drivers/video/sh_mobile_lcdcfb.h | 3 +++
 4 files changed, 16 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 1ede247547f..5ff3742aeb0 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -412,7 +412,7 @@ static int mipi_display_on(struct sh_mobile_lcdc_entity *entity)
 
 	sh_mipi_dsi_enable(mipi, true);
 
-	return 0;
+	return SH_MOBILE_LCDC_DISPLAY_CONNECTED;
 
 mipi_display_on_fail1:
 	pm_runtime_put_sync(&mipi->pdev->dev);
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index c22e123ec40..1464abf81a4 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1004,9 +1004,9 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
 	struct sh_mobile_lcdc_chan *ch = entity->lcdc;
-	struct fb_info *info = ch->info;
 
-	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi, info->state);
+	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi,
+		hdmi->hp_state);
 
 	/*
 	 * hp_state can be set to
@@ -1021,12 +1021,13 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 		dev_dbg(hdmi->dev, "HDMI running\n");
 		break;
 	case HDMI_HOTPLUG_DISCONNECTED:
-		info->state = FBINFO_STATE_SUSPENDED;
 	default:
 		hdmi->var = ch->display_var;
 	}
 
-	return 0;
+	return hdmi->hp_state == HDMI_HOTPLUG_DISCONNECTED
+		? SH_MOBILE_LCDC_DISPLAY_DISCONNECTED
+		: SH_MOBILE_LCDC_DISPLAY_CONNECTED;
 }
 
 static void sh_hdmi_display_off(struct sh_mobile_lcdc_entity *entity)
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 03ee3826fb6..5a19ef3f215 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -338,8 +338,14 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
 
 	if (ch->tx_dev) {
-		if (ch->tx_dev->ops->display_on(ch->tx_dev) < 0)
+		int ret;
+
+		ret = ch->tx_dev->ops->display_on(ch->tx_dev);
+		if (ret < 0)
 			return;
+
+		if (ret == SH_MOBILE_LCDC_DISPLAY_DISCONNECTED)
+			ch->info->state = FBINFO_STATE_SUSPENDED;
 	}
 
 	/* HDMI must be enabled before LCDC configuration */
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index b2cb8e6d098..6fb956c8e60 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -21,6 +21,9 @@ struct sh_mobile_lcdc_entity;
 struct sh_mobile_lcdc_priv;
 struct sh_mobile_lcdc_chan;
 
+#define SH_MOBILE_LCDC_DISPLAY_DISCONNECTED	0
+#define SH_MOBILE_LCDC_DISPLAY_CONNECTED	1
+
 struct sh_mobile_lcdc_entity_ops {
 	/* Display */
 	int (*display_on)(struct sh_mobile_lcdc_entity *entity);
-- 
cgit v1.2.3-70-g09d2


From ecd29947862a9a145c07098499c76c22ed5b8eb3 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 18 Sep 2011 14:14:46 +0200
Subject: sh_mobile_lcdc: Add display notify callback to sh_mobile_lcdc_chan

The callback implements 3 notification events:

- SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT notifies the LCDC that the
  display has been connected
- SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT notifies the LCDC that the
  display has been disconnected
- SH_MOBILE_LCDC_EVENT_DISPLAY_MODE notifies that LCDC that a display
  mode has been detected

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 84 ++++++++++++++++++++++++++++++++++++++++
 drivers/video/sh_mobile_lcdcfb.h | 10 +++++
 2 files changed, 94 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 5a19ef3f215..128eb7793a6 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -364,6 +364,89 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 		ch->tx_dev->ops->display_off(ch->tx_dev);
 }
 
+static bool
+sh_mobile_lcdc_must_reconfigure(struct sh_mobile_lcdc_chan *ch,
+				const struct fb_var_screeninfo *new_var)
+{
+	struct fb_var_screeninfo *old_var = &ch->display_var;
+	struct fb_videomode old_mode;
+	struct fb_videomode new_mode;
+
+	fb_var_to_videomode(&old_mode, old_var);
+	fb_var_to_videomode(&new_mode, new_var);
+
+	dev_dbg(ch->info->dev, "Old %ux%u, new %ux%u\n",
+		old_mode.xres, old_mode.yres, new_mode.xres, new_mode.yres);
+
+	if (fb_mode_is_equal(&old_mode, &new_mode)) {
+		/* It can be a different monitor with an equal video-mode */
+		old_var->width = new_var->width;
+		old_var->height = new_var->height;
+		return false;
+	}
+
+	dev_dbg(ch->info->dev, "Switching %u -> %u lines\n",
+		old_mode.yres, new_mode.yres);
+	*old_var = *new_var;
+
+	return true;
+}
+
+static int sh_mobile_check_var(struct fb_var_screeninfo *var,
+			       struct fb_info *info);
+
+static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
+					 enum sh_mobile_lcdc_entity_event event,
+					 struct fb_var_screeninfo *var)
+{
+	struct fb_info *info = ch->info;
+	int ret = 0;
+
+	switch (event) {
+	case SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT:
+		/* HDMI plug in */
+		if (lock_fb_info(info)) {
+			console_lock();
+
+			if (!sh_mobile_lcdc_must_reconfigure(ch, var) &&
+			    info->state == FBINFO_STATE_RUNNING) {
+				/* First activation with the default monitor.
+				 * Just turn on, if we run a resume here, the
+				 * logo disappears.
+				 */
+				info->var.width = var->width;
+				info->var.height = var->height;
+				sh_mobile_lcdc_display_on(ch);
+			} else {
+				/* New monitor or have to wake up */
+				fb_set_suspend(info, 0);
+			}
+
+			console_unlock();
+			unlock_fb_info(info);
+		}
+		break;
+
+	case SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT:
+		/* HDMI disconnect */
+		if (lock_fb_info(info)) {
+			console_lock();
+			fb_set_suspend(info, 1);
+			console_unlock();
+			unlock_fb_info(info);
+		}
+		break;
+
+	case SH_MOBILE_LCDC_EVENT_DISPLAY_MODE:
+		/* Validate a proposed new mode */
+		var->bits_per_pixel = info->var.bits_per_pixel;
+		ret = sh_mobile_check_var(var, info);
+		break;
+	}
+
+	return ret;
+}
+
 /* -----------------------------------------------------------------------------
  * Format helpers
  */
@@ -1591,6 +1674,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	int i;
 
 	mutex_init(&ch->open_lock);
+	ch->notify = sh_mobile_lcdc_display_notify;
 
 	/* Allocate the frame buffer device. */
 	ch->info = framebuffer_alloc(0, priv->dev);
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 6fb956c8e60..e2eb7af438f 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -30,6 +30,12 @@ struct sh_mobile_lcdc_entity_ops {
 	void (*display_off)(struct sh_mobile_lcdc_entity *entity);
 };
 
+enum sh_mobile_lcdc_entity_event {
+	SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT,
+	SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT,
+	SH_MOBILE_LCDC_EVENT_DISPLAY_MODE,
+};
+
 struct sh_mobile_lcdc_entity {
 	struct module *owner;
 	const struct sh_mobile_lcdc_entity_ops *ops;
@@ -70,6 +76,10 @@ struct sh_mobile_lcdc_chan {
 	unsigned long base_addr_y;
 	unsigned long base_addr_c;
 	unsigned int pitch;
+
+	int (*notify)(struct sh_mobile_lcdc_chan *ch,
+		      enum sh_mobile_lcdc_entity_event event,
+		      struct fb_var_screeninfo *var);
 };
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From 7295752fd7ec86feca6e3ccb407c1cbabf59e1d3 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Sun, 18 Sep 2011 14:18:28 +0200
Subject: sh_mobile_hdmi: Use LCDC notification callback

Instead of accessing the LCDC channel and fb_info structures directly,
use the LCDC notification callback to inform the LCDC driver about
display-related events.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 91 +++++++-----------------------------------
 1 file changed, 14 insertions(+), 77 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 1464abf81a4..055cd92b85c 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -733,12 +733,11 @@ static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
 static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 			     unsigned long *parent_rate)
 {
-	struct fb_info *info = hdmi->entity.lcdc
-			     ? hdmi->entity.lcdc->info : NULL;
-	struct fb_var_screeninfo tmpvar;
-	struct fb_var_screeninfo *var = &tmpvar;
+	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
+	struct fb_info *info = ch ? ch->info : NULL;
+	struct fb_var_screeninfo var;
 	const struct fb_videomode *mode, *found = NULL;
-	struct fb_modelist *modelist = NULL;
+	const struct fb_modelist *modelist = NULL;
 	unsigned int f_width = 0, f_height = 0, f_refresh = 0;
 	unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */
 	bool scanning = false, preferred_bad = false;
@@ -856,12 +855,10 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 		}
 
 		/* Check if supported: sufficient fb memory, supported clock-rate */
-		fb_videomode_to_var(var, mode);
+		fb_videomode_to_var(&var, mode);
 
-		var->bits_per_pixel = info->var.bits_per_pixel;
-
-		if (info && info->fbops->fb_check_var &&
-		    info->fbops->fb_check_var(var, info)) {
+		if (ch && ch->notify &&
+		    ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_MODE, &var)) {
 			scanning = true;
 			preferred_bad = true;
 			continue;
@@ -1044,32 +1041,6 @@ static const struct sh_mobile_lcdc_entity_ops sh_hdmi_ops = {
 	.display_off = sh_hdmi_display_off,
 };
 
-static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
-{
-	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
-	struct fb_var_screeninfo *new_var = &hdmi->var, *old_var = &ch->display_var;
-	struct fb_videomode mode1, mode2;
-
-	fb_var_to_videomode(&mode1, old_var);
-	fb_var_to_videomode(&mode2, new_var);
-
-	dev_dbg(hdmi->dev, "Old %ux%u, new %ux%u\n",
-		mode1.xres, mode1.yres, mode2.xres, mode2.yres);
-
-	if (fb_mode_is_equal(&mode1, &mode2)) {
-		/* It can be a different monitor with an equal video-mode */
-		old_var->width = new_var->width;
-		old_var->height = new_var->height;
-		return false;
-	}
-
-	dev_dbg(hdmi->dev, "Switching %u -> %u lines\n",
-		mode1.yres, mode2.yres);
-	*old_var = *new_var;
-
-	return true;
-}
-
 /**
  * sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock
  * @hdmi:		driver context
@@ -1110,7 +1081,6 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 {
 	struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
 	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
-	struct fb_info *info;
 	int ret;
 
 	dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__, hdmi,
@@ -1135,52 +1105,19 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 		/* Switched to another (d) power-save mode */
 		msleep(10);
 
-		if (ch == NULL)
-			goto out;
-
-		info = ch->info;
-
-		if (lock_fb_info(info)) {
-			console_lock();
-
-			/* HDMI plug in */
-			if (!sh_hdmi_must_reconfigure(hdmi) &&
-			    info->state == FBINFO_STATE_RUNNING) {
-				/*
-				 * First activation with the default monitor - just turn
-				 * on, if we run a resume here, the logo disappears
-				 */
-				info->var.width = hdmi->var.width;
-				info->var.height = hdmi->var.height;
-				sh_hdmi_display_on(&hdmi->entity);
-			} else {
-				/* New monitor or have to wake up */
-				fb_set_suspend(info, 0);
-			}
-
-			console_unlock();
-			unlock_fb_info(info);
-		}
+		if (ch && ch->notify)
+			ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT,
+				   &hdmi->var);
 	} else {
-		ret = 0;
-		if (ch == NULL)
-			goto out;
-
-		info = ch->info;
-
 		hdmi->monspec.modedb_len = 0;
 		fb_destroy_modedb(hdmi->monspec.modedb);
 		hdmi->monspec.modedb = NULL;
 
-		if (lock_fb_info(info)) {
-			console_lock();
+		if (ch && ch->notify)
+			ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT,
+				   NULL);
 
-			/* HDMI disconnect */
-			fb_set_suspend(info, 1);
-
-			console_unlock();
-			unlock_fb_info(info);
-		}
+		ret = 0;
 	}
 
 out:
-- 
cgit v1.2.3-70-g09d2


From e0c8601a18969229eb63065e5c3176319c785288 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 01:05:47 +0100
Subject: fbdev: sh_mobile_lcdc: Pass a video mode to the notify callback

Pass pointers to struct fb_videomode and struct fb_monspecs instead of
struct fb_var_screeninfo to the notify callback.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c   | 59 ++++++++++++++++++----------------------
 drivers/video/sh_mobile_lcdcfb.c | 36 ++++++++++++------------
 drivers/video/sh_mobile_lcdcfb.h |  3 +-
 3 files changed, 48 insertions(+), 50 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 055cd92b85c..26176094971 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -220,7 +220,7 @@ struct sh_hdmi {
 	struct clk *hdmi_clk;
 	struct device *dev;
 	struct delayed_work edid_work;
-	struct fb_var_screeninfo var;
+	struct fb_videomode mode;
 	struct fb_monspecs monspec;
 };
 
@@ -291,24 +291,24 @@ static struct snd_soc_codec_driver soc_codec_dev_sh_hdmi = {
 /* External video parameter settings */
 static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
 {
-	struct fb_var_screeninfo *var = &hdmi->var;
+	struct fb_videomode *mode = &hdmi->mode;
 	u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
 	u8 sync = 0;
 
-	htotal = var->xres + var->right_margin + var->left_margin + var->hsync_len;
-
-	hdelay = var->hsync_len + var->left_margin;
-	hblank = var->right_margin + hdelay;
+	htotal = mode->xres + mode->right_margin + mode->left_margin
+	       + mode->hsync_len;
+	hdelay = mode->hsync_len + mode->left_margin;
+	hblank = mode->right_margin + hdelay;
 
 	/*
 	 * Vertical timing looks a bit different in Figure 18,
 	 * but let's try the same first by setting offset = 0
 	 */
-	vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
-
-	vdelay = var->vsync_len + var->upper_margin;
-	vblank = var->lower_margin + vdelay;
-	voffset = min(var->upper_margin / 2, 6U);
+	vtotal = mode->yres + mode->upper_margin + mode->lower_margin
+	       + mode->vsync_len;
+	vdelay = mode->vsync_len + mode->upper_margin;
+	vblank = mode->lower_margin + vdelay;
+	voffset = min(mode->upper_margin / 2, 6U);
 
 	/*
 	 * [3]: VSYNC polarity: Positive
@@ -316,14 +316,14 @@ static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
 	 * [1]: Interlace/Progressive: Progressive
 	 * [0]: External video settings enable: used.
 	 */
-	if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+	if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
 		sync |= 4;
-	if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+	if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
 		sync |= 8;
 
 	dev_dbg(hdmi->dev, "H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
-		htotal, hblank, hdelay, var->hsync_len,
-		vtotal, vblank, vdelay, var->vsync_len, sync);
+		htotal, hblank, hdelay, mode->hsync_len,
+		vtotal, vblank, vdelay, mode->vsync_len, sync);
 
 	hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
 
@@ -336,8 +336,8 @@ static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
 	hdmi_write(hdmi, hdelay, HDMI_EXTERNAL_H_DELAY_7_0);
 	hdmi_write(hdmi, hdelay >> 8, HDMI_EXTERNAL_H_DELAY_9_8);
 
-	hdmi_write(hdmi, var->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0);
-	hdmi_write(hdmi, var->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8);
+	hdmi_write(hdmi, mode->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0);
+	hdmi_write(hdmi, mode->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8);
 
 	hdmi_write(hdmi, vtotal, HDMI_EXTERNAL_V_TOTAL_7_0);
 	hdmi_write(hdmi, vtotal >> 8, HDMI_EXTERNAL_V_TOTAL_9_8);
@@ -346,7 +346,7 @@ static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
 
 	hdmi_write(hdmi, vdelay, HDMI_EXTERNAL_V_DELAY);
 
-	hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
+	hdmi_write(hdmi, mode->vsync_len, HDMI_EXTERNAL_V_DURATION);
 
 	/* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for external mode */
 	if (!hdmi->preprogrammed_vic)
@@ -473,7 +473,7 @@ static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
  */
 static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
 {
-	if (hdmi->var.pixclock < 10000) {
+	if (hdmi->mode.pixclock < 10000) {
 		/* for 1080p8bit 148MHz */
 		hdmi_write(hdmi, 0x1d, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
 		hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
@@ -484,7 +484,7 @@ static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
 		hdmi_write(hdmi, 0x0e, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
 		hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
 		hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
-	} else if (hdmi->var.pixclock < 30000) {
+	} else if (hdmi->mode.pixclock < 30000) {
 		/* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
 		/*
 		 * [1:0]	Speed_A
@@ -735,7 +735,6 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 {
 	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
 	struct fb_info *info = ch ? ch->info : NULL;
-	struct fb_var_screeninfo var;
 	const struct fb_videomode *mode, *found = NULL;
 	const struct fb_modelist *modelist = NULL;
 	unsigned int f_width = 0, f_height = 0, f_refresh = 0;
@@ -855,10 +854,9 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 		}
 
 		/* Check if supported: sufficient fb memory, supported clock-rate */
-		fb_videomode_to_var(&var, mode);
-
 		if (ch && ch->notify &&
-		    ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_MODE, &var)) {
+		    ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_MODE, mode,
+			       NULL)) {
 			scanning = true;
 			preferred_bad = true;
 			continue;
@@ -868,9 +866,6 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 		found_rate_error = rate_error;
 	}
 
-	hdmi->var.width = hdmi->monspec.max_x * 10;
-	hdmi->var.height = hdmi->monspec.max_y * 10;
-
 	/*
 	 * TODO 1: if no ->info is present, postpone running the config until
 	 * after ->info first gets registered.
@@ -916,7 +911,7 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 		found->xres, found->yres, found->refresh,
 		PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
 
-	fb_videomode_to_var(&hdmi->var, found);
+	hdmi->mode = *found;
 	sh_hdmi_external_video_param(hdmi);
 
 	return 0;
@@ -1017,9 +1012,9 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 		hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
 		dev_dbg(hdmi->dev, "HDMI running\n");
 		break;
-	case HDMI_HOTPLUG_DISCONNECTED:
 	default:
-		hdmi->var = ch->display_var;
+		fb_var_to_videomode(&hdmi->mode, &ch->display_var);
+		break;
 	}
 
 	return hdmi->hp_state == HDMI_HOTPLUG_DISCONNECTED
@@ -1107,7 +1102,7 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 
 		if (ch && ch->notify)
 			ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_CONNECT,
-				   &hdmi->var);
+				   &hdmi->mode, &hdmi->monspec);
 	} else {
 		hdmi->monspec.modedb_len = 0;
 		fb_destroy_modedb(hdmi->monspec.modedb);
@@ -1115,7 +1110,7 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 
 		if (ch && ch->notify)
 			ch->notify(ch, SH_MOBILE_LCDC_EVENT_DISPLAY_DISCONNECT,
-				   NULL);
+				   NULL, NULL);
 
 		ret = 0;
 	}
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 128eb7793a6..d3299ff543b 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -366,28 +366,23 @@ static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 
 static bool
 sh_mobile_lcdc_must_reconfigure(struct sh_mobile_lcdc_chan *ch,
-				const struct fb_var_screeninfo *new_var)
+				const struct fb_videomode *new_mode)
 {
 	struct fb_var_screeninfo *old_var = &ch->display_var;
 	struct fb_videomode old_mode;
-	struct fb_videomode new_mode;
 
 	fb_var_to_videomode(&old_mode, old_var);
-	fb_var_to_videomode(&new_mode, new_var);
 
 	dev_dbg(ch->info->dev, "Old %ux%u, new %ux%u\n",
-		old_mode.xres, old_mode.yres, new_mode.xres, new_mode.yres);
+		old_mode.xres, old_mode.yres, new_mode->xres, new_mode->yres);
 
-	if (fb_mode_is_equal(&old_mode, &new_mode)) {
-		/* It can be a different monitor with an equal video-mode */
-		old_var->width = new_var->width;
-		old_var->height = new_var->height;
+	/* It can be a different monitor with an equal video-mode */
+	if (fb_mode_is_equal(&old_mode, new_mode))
 		return false;
-	}
 
 	dev_dbg(ch->info->dev, "Switching %u -> %u lines\n",
-		old_mode.yres, new_mode.yres);
-	*old_var = *new_var;
+		old_mode.yres, new_mode->yres);
+	fb_videomode_to_var(old_var, new_mode);
 
 	return true;
 }
@@ -397,9 +392,11 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var,
 
 static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
 					 enum sh_mobile_lcdc_entity_event event,
-					 struct fb_var_screeninfo *var)
+					 const struct fb_videomode *mode,
+					 const struct fb_monspecs *monspec)
 {
 	struct fb_info *info = ch->info;
+	struct fb_var_screeninfo var;
 	int ret = 0;
 
 	switch (event) {
@@ -408,14 +405,17 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
 		if (lock_fb_info(info)) {
 			console_lock();
 
-			if (!sh_mobile_lcdc_must_reconfigure(ch, var) &&
+			ch->display_var.width = monspec->max_x * 10;
+			ch->display_var.height = monspec->max_y * 10;
+
+			if (!sh_mobile_lcdc_must_reconfigure(ch, mode) &&
 			    info->state == FBINFO_STATE_RUNNING) {
 				/* First activation with the default monitor.
 				 * Just turn on, if we run a resume here, the
 				 * logo disappears.
 				 */
-				info->var.width = var->width;
-				info->var.height = var->height;
+				info->var.width = monspec->max_x * 10;
+				info->var.height = monspec->max_y * 10;
 				sh_mobile_lcdc_display_on(ch);
 			} else {
 				/* New monitor or have to wake up */
@@ -439,8 +439,10 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
 
 	case SH_MOBILE_LCDC_EVENT_DISPLAY_MODE:
 		/* Validate a proposed new mode */
-		var->bits_per_pixel = info->var.bits_per_pixel;
-		ret = sh_mobile_check_var(var, info);
+		fb_videomode_to_var(&var, mode);
+		var.bits_per_pixel = info->var.bits_per_pixel;
+		var.grayscale = info->var.grayscale;
+		ret = sh_mobile_check_var(&var, info);
 		break;
 	}
 
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index e2eb7af438f..10086ae2c5e 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -79,7 +79,8 @@ struct sh_mobile_lcdc_chan {
 
 	int (*notify)(struct sh_mobile_lcdc_chan *ch,
 		      enum sh_mobile_lcdc_entity_event event,
-		      struct fb_var_screeninfo *var);
+		      const struct fb_videomode *mode,
+		      const struct fb_monspecs *monspec);
 };
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From d30555d24e462edf439a1057114e1b0df76c89ef Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 01:07:50 +0100
Subject: fbdev: sh_mobile_hdmi: Don't set sh_hdmi::mode in the display on
 handler

The struct sh_hdmi mode field is only used after being assigned by the
EDID read code. There is thus no need to initialize it from the LCDC
display var in the display on handler.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 26176094971..37f935fd5a1 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -995,7 +995,6 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
 static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 {
 	struct sh_hdmi *hdmi = entity_to_sh_hdmi(entity);
-	struct sh_mobile_lcdc_chan *ch = entity->lcdc;
 
 	dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, hdmi,
 		hdmi->hp_state);
@@ -1006,15 +1005,10 @@ static int sh_hdmi_display_on(struct sh_mobile_lcdc_entity *entity)
 	 * HDMI_HOTPLUG_CONNECTED:	on monitor plug-in
 	 * HDMI_HOTPLUG_EDID_DONE:	on EDID read completion
 	 */
-	switch (hdmi->hp_state) {
-	case HDMI_HOTPLUG_EDID_DONE:
+	if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
 		/* PS mode d->e. All functions are active */
 		hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
 		dev_dbg(hdmi->dev, "HDMI running\n");
-		break;
-	default:
-		fb_var_to_videomode(&hdmi->mode, &ch->display_var);
-		break;
 	}
 
 	return hdmi->hp_state == HDMI_HOTPLUG_DISCONNECTED
-- 
cgit v1.2.3-70-g09d2


From 13f80eea562be6cd58b5bdefc224c87cc0d9288d Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 01:46:12 +0100
Subject: fbdev: sh_mobile_hdmi: Don't access LCDC fb_info

The LCDC fb_info structure is only used to retrieve the default video
mode in case none of the modes advertised by EDID information is
acceptable. Pass a pointer to the default mode through the
sh_mobile_lcdc_entity structure instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_hdmi.c   | 34 ++++++++++++++--------------------
 drivers/video/sh_mobile_lcdcfb.c | 24 +++++++++++++-----------
 drivers/video/sh_mobile_lcdcfb.h |  1 +
 3 files changed, 28 insertions(+), 31 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 37f935fd5a1..eafb19da2c0 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -734,12 +734,11 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 			     unsigned long *parent_rate)
 {
 	struct sh_mobile_lcdc_chan *ch = hdmi->entity.lcdc;
-	struct fb_info *info = ch ? ch->info : NULL;
 	const struct fb_videomode *mode, *found = NULL;
-	const struct fb_modelist *modelist = NULL;
 	unsigned int f_width = 0, f_height = 0, f_refresh = 0;
 	unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */
 	bool scanning = false, preferred_bad = false;
+	bool use_edid_mode = false;
 	u8 edid[128];
 	char *forced;
 	int i;
@@ -864,25 +863,19 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 
 		found = mode;
 		found_rate_error = rate_error;
+		use_edid_mode = true;
 	}
 
 	/*
-	 * TODO 1: if no ->info is present, postpone running the config until
-	 * after ->info first gets registered.
+	 * TODO 1: if no default mode is present, postpone running the config
+	 * until after the LCDC channel is initialized.
 	 * TODO 2: consider registering the HDMI platform device from the LCDC
-	 * driver, and passing ->info with HDMI platform data.
+	 * driver.
 	 */
-	if (info && !found) {
-		modelist = info->modelist.next &&
-			!list_empty(&info->modelist) ?
-			list_entry(info->modelist.next,
-				   struct fb_modelist, list) :
-			NULL;
-
-		if (modelist) {
-			found = &modelist->mode;
-			found_rate_error = sh_hdmi_rate_error(hdmi, found, hdmi_rate, parent_rate);
-		}
+	if (!found && hdmi->entity.def_mode.xres != 0) {
+		found = &hdmi->entity.def_mode;
+		found_rate_error = sh_hdmi_rate_error(hdmi, found, hdmi_rate,
+						      parent_rate);
 	}
 
 	/* No cookie today */
@@ -906,10 +899,11 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
 	else
 		hdmi->preprogrammed_vic = 0;
 
-	dev_dbg(hdmi->dev, "Using %s %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
-		modelist ? "default" : "EDID", hdmi->preprogrammed_vic ? "VIC" : "external",
-		found->xres, found->yres, found->refresh,
-		PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
+	dev_dbg(hdmi->dev, "Using %s %s mode %ux%u@%uHz (%luHz), "
+		"clock error %luHz\n", use_edid_mode ? "EDID" : "default",
+		hdmi->preprogrammed_vic ? "VIC" : "external", found->xres,
+		found->yres, found->refresh, PICOS2KHZ(found->pixclock) * 1000,
+		found_rate_error);
 
 	hdmi->mode = *found;
 	sh_hdmi_external_video_param(hdmi);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index d3299ff543b..986346dbe05 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1691,17 +1691,6 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	info->pseudo_palette = &ch->pseudo_palette;
 	info->flags = FBINFO_FLAG_DEFAULT;
 
-	if (cfg->tx_dev) {
-		if (!cfg->tx_dev->dev.driver ||
-		    !try_module_get(cfg->tx_dev->dev.driver->owner)) {
-			dev_warn(priv->dev,
-				 "unable to get transmitter device\n");
-			return -EINVAL;
-		}
-		ch->tx_dev = platform_get_drvdata(cfg->tx_dev);
-		ch->tx_dev->lcdc = ch;
-	}
-
 	/* Iterate through the modes to validate them and find the highest
 	 * resolution.
 	 */
@@ -1742,6 +1731,19 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 
 	fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
 
+	/* Initialize the transmitter device if present. */
+	if (cfg->tx_dev) {
+		if (!cfg->tx_dev->dev.driver ||
+		    !try_module_get(cfg->tx_dev->dev.driver->owner)) {
+			dev_warn(priv->dev,
+				 "unable to get transmitter device\n");
+			return -EINVAL;
+		}
+		ch->tx_dev = platform_get_drvdata(cfg->tx_dev);
+		ch->tx_dev->lcdc = ch;
+		ch->tx_dev->def_mode = *mode;
+	}
+
 	/* Initialize variable screen information using the first mode as
 	 * default. The default Y virtual resolution is twice the panel size to
 	 * allow for double-buffering.
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 10086ae2c5e..9c91fae1ea4 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -40,6 +40,7 @@ struct sh_mobile_lcdc_entity {
 	struct module *owner;
 	const struct sh_mobile_lcdc_entity_ops *ops;
 	struct sh_mobile_lcdc_chan *lcdc;
+	struct fb_videomode def_mode;
 };
 
 /*
-- 
cgit v1.2.3-70-g09d2


From 2d04559dc23bed905ed2904f2bbcbcc3f1a7fd91 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 13:42:48 +0100
Subject: fbdev: sh_mobile_lcdc: Store display mode in a struct fb_videomode

Embed struct fb_videomode instead of struct fb_var_screeninfo in struct
sh_mobile_lcdc_chan to store the display mode.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 74 +++++++++++++++++++++-------------------
 drivers/video/sh_mobile_lcdcfb.h |  6 +++-
 2 files changed, 44 insertions(+), 36 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 986346dbe05..422fcfd3cf2 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -368,21 +368,17 @@ static bool
 sh_mobile_lcdc_must_reconfigure(struct sh_mobile_lcdc_chan *ch,
 				const struct fb_videomode *new_mode)
 {
-	struct fb_var_screeninfo *old_var = &ch->display_var;
-	struct fb_videomode old_mode;
-
-	fb_var_to_videomode(&old_mode, old_var);
-
 	dev_dbg(ch->info->dev, "Old %ux%u, new %ux%u\n",
-		old_mode.xres, old_mode.yres, new_mode->xres, new_mode->yres);
+		ch->display.mode.xres, ch->display.mode.yres,
+		new_mode->xres, new_mode->yres);
 
 	/* It can be a different monitor with an equal video-mode */
-	if (fb_mode_is_equal(&old_mode, new_mode))
+	if (fb_mode_is_equal(&ch->display.mode, new_mode))
 		return false;
 
 	dev_dbg(ch->info->dev, "Switching %u -> %u lines\n",
-		old_mode.yres, new_mode->yres);
-	fb_videomode_to_var(old_var, new_mode);
+		ch->display.mode.yres, new_mode->yres);
+	ch->display.mode = *new_mode;
 
 	return true;
 }
@@ -405,8 +401,8 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
 		if (lock_fb_info(info)) {
 			console_lock();
 
-			ch->display_var.width = monspec->max_x * 10;
-			ch->display_var.height = monspec->max_y * 10;
+			ch->display.width = monspec->max_x * 10;
+			ch->display.height = monspec->max_y * 10;
 
 			if (!sh_mobile_lcdc_must_reconfigure(ch, mode) &&
 			    info->state == FBINFO_STATE_RUNNING) {
@@ -569,7 +565,8 @@ static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
 
 static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 {
-	struct fb_var_screeninfo *var = &ch->info->var, *display_var = &ch->display_var;
+	const struct fb_var_screeninfo *var = &ch->info->var;
+	const struct fb_videomode *mode = &ch->display.mode;
 	unsigned long h_total, hsync_pos, display_h_total;
 	u32 tmp;
 
@@ -588,34 +585,32 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 	lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
 
 	/* horizontal configuration */
-	h_total = display_var->xres + display_var->hsync_len +
-		display_var->left_margin + display_var->right_margin;
+	h_total = mode->xres + mode->hsync_len + mode->left_margin
+		+ mode->right_margin;
 	tmp = h_total / 8; /* HTCN */
-	tmp |= (min(display_var->xres, var->xres) / 8) << 16; /* HDCN */
+	tmp |= (min(mode->xres, var->xres) / 8) << 16; /* HDCN */
 	lcdc_write_chan(ch, LDHCNR, tmp);
 
-	hsync_pos = display_var->xres + display_var->right_margin;
+	hsync_pos = mode->xres + mode->right_margin;
 	tmp = hsync_pos / 8; /* HSYNP */
-	tmp |= (display_var->hsync_len / 8) << 16; /* HSYNW */
+	tmp |= (mode->hsync_len / 8) << 16; /* HSYNW */
 	lcdc_write_chan(ch, LDHSYNR, tmp);
 
 	/* vertical configuration */
-	tmp = display_var->yres + display_var->vsync_len +
-		display_var->upper_margin + display_var->lower_margin; /* VTLN */
-	tmp |= min(display_var->yres, var->yres) << 16; /* VDLN */
+	tmp = mode->yres + mode->vsync_len + mode->upper_margin
+	    + mode->lower_margin; /* VTLN */
+	tmp |= min(mode->yres, var->yres) << 16; /* VDLN */
 	lcdc_write_chan(ch, LDVLNR, tmp);
 
-	tmp = display_var->yres + display_var->lower_margin; /* VSYNP */
-	tmp |= display_var->vsync_len << 16; /* VSYNW */
+	tmp = mode->yres + mode->lower_margin; /* VSYNP */
+	tmp |= mode->vsync_len << 16; /* VSYNW */
 	lcdc_write_chan(ch, LDVSYNR, tmp);
 
 	/* Adjust horizontal synchronisation for HDMI */
-	display_h_total = display_var->xres + display_var->hsync_len +
-		display_var->left_margin + display_var->right_margin;
-	tmp = ((display_var->xres & 7) << 24) |
-		((display_h_total & 7) << 16) |
-		((display_var->hsync_len & 7) << 8) |
-		(hsync_pos & 7);
+	display_h_total = mode->xres + mode->hsync_len + mode->left_margin
+			+ mode->right_margin;
+	tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16)
+	    | ((mode->hsync_len & 7) << 8) | (hsync_pos & 7);
 	lcdc_write_chan(ch, LDHAJR, tmp);
 }
 
@@ -1106,7 +1101,8 @@ static int sh_mobile_ioctl(struct fb_info *info, unsigned int cmd,
 static void sh_mobile_fb_reconfig(struct fb_info *info)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	struct fb_videomode mode1, mode2;
+	struct fb_var_screeninfo var;
+	struct fb_videomode mode;
 	struct fb_event event;
 	int evnt = FB_EVENT_MODE_CHANGE_ALL;
 
@@ -1114,14 +1110,19 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 		/* More framebuffer users are active */
 		return;
 
-	fb_var_to_videomode(&mode1, &ch->display_var);
-	fb_var_to_videomode(&mode2, &info->var);
+	fb_var_to_videomode(&mode, &info->var);
 
-	if (fb_mode_is_equal(&mode1, &mode2))
+	if (fb_mode_is_equal(&ch->display.mode, &mode))
 		return;
 
 	/* Display has been re-plugged, framebuffer is free now, reconfigure */
-	if (fb_set_var(info, &ch->display_var) < 0)
+	var = info->var;
+	fb_videomode_to_var(&var, &ch->display.mode);
+	var.width = ch->display.width;
+	var.height = ch->display.height;
+	var.activate = FB_ACTIVATE_NOW;
+
+	if (fb_set_var(info, &var) < 0)
 		/* Couldn't reconfigure, hopefully, can continue as before */
 		return;
 
@@ -1131,7 +1132,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 	 * user event, we have to call the chain ourselves.
 	 */
 	event.info = info;
-	event.data = &mode1;
+	event.data = &ch->display.mode;
 	fb_notifier_call_chain(evnt, &event);
 }
 
@@ -1815,7 +1816,10 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 
 	info->screen_base = buf;
 	info->device = priv->dev;
-	ch->display_var = *var;
+
+	ch->display.width = cfg->panel_cfg.width;
+	ch->display.height = cfg->panel_cfg.height;
+	ch->display.mode = *mode;
 
 	return 0;
 }
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 9c91fae1ea4..c1753877b4e 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -68,7 +68,11 @@ struct sh_mobile_lcdc_chan {
 	unsigned long pan_offset;
 	wait_queue_head_t frame_end_wait;
 	struct completion vsync_completion;
-	struct fb_var_screeninfo display_var;
+	struct {
+		unsigned int width;
+		unsigned int height;
+		struct fb_videomode mode;
+	} display;
 	int use_count;
 	int blank_status;
 	struct mutex open_lock;		/* protects the use counter */
-- 
cgit v1.2.3-70-g09d2


From 93ff259846a774ff37dca54792c5a3a6425882c0 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 14:33:41 +0100
Subject: fbdev: sh_mobile_lcdc: Rename (lcd|num)_cfg (lcd|num)_modes

The struct sh_mobile_lcdc_chan_cfg platform data contains a list of
video modes. Name the lcd_cfg and num_cfg fields to reflect that they
describe video modes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-ag5evm.c   |  4 ++--
 arch/arm/mach-shmobile/board-ap4evb.c   |  4 ++--
 arch/arm/mach-shmobile/board-bonito.c   |  4 ++--
 arch/arm/mach-shmobile/board-mackerel.c |  4 ++--
 arch/sh/boards/mach-ap325rxa/setup.c    |  4 ++--
 arch/sh/boards/mach-ecovec24/setup.c    |  8 +++----
 arch/sh/boards/mach-kfr2r09/setup.c     |  4 ++--
 arch/sh/boards/mach-migor/setup.c       |  8 +++----
 arch/sh/boards/mach-se/7724/setup.c     |  8 +++----
 drivers/video/sh_mipi_dsi.c             | 38 ++++++++++++++++-----------------
 drivers/video/sh_mobile_lcdcfb.c        | 20 ++++++++---------
 include/video/sh_mobile_lcdc.h          |  4 ++--
 12 files changed, 55 insertions(+), 55 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 199b3b958f4..33dad1da931 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -253,8 +253,8 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.clock_divider = 1,
 		.flags = LCDC_FLAGS_DWPOL,
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_cfg = lcdc0_modes,
-		.num_cfg = ARRAY_SIZE(lcdc0_modes),
+		.lcd_modes = lcdc0_modes,
+		.num_modes = ARRAY_SIZE(lcdc0_modes),
 		.panel_cfg = {
 			.width = 44,
 			.height = 79,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 2cb6c39dd62..80b94302981 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -593,8 +593,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_cfg = ap4evb_lcdc_modes,
-		.num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
+		.lcd_modes = ap4evb_lcdc_modes,
+		.num_modes = ARRAY_SIZE(ap4evb_lcdc_modes),
 		.meram_cfg = &lcd_meram_cfg,
 #ifdef CONFIG_AP4EVB_QHD
 		.tx_dev = &mipidsi0_device,
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index 9cd9408b851..fb90f0898d9 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -245,8 +245,8 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 		.interface_type		= RGB24,
 		.clock_divider		= 5,
 		.flags			= 0,
-		.lcd_cfg		= &lcdc0_mode,
-		.num_cfg		= 1,
+		.lcd_modes		= &lcdc0_mode,
+		.num_modes		= 1,
 		.panel_cfg = {
 			.width	= 152,
 			.height = 91,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9228cc555b4..aff7df8ccc3 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -384,8 +384,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.chan = LCDC_CHAN_MAINLCD,
 		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_cfg = mackerel_lcdc_modes,
-		.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
+		.lcd_modes = mackerel_lcdc_modes,
+		.num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
 		.interface_type		= RGB24,
 		.clock_divider		= 3,
 		.flags			= 0,
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index a87b7f42f12..8cf02e34333 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -211,8 +211,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB18,
 		.clock_divider = 1,
-		.lcd_cfg = ap325rxa_lcdc_modes,
-		.num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
+		.lcd_modes = ap325rxa_lcdc_modes,
+		.num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
 		.panel_cfg = {
 			.width = 152,	/* 7.0 inch */
 			.height = 91,
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 41767451ead..0b08230546e 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -1114,8 +1114,8 @@ static int __init arch_setup(void)
 		/* DVI */
 		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
 		lcdc_info.ch[0].clock_divider		= 1;
-		lcdc_info.ch[0].lcd_cfg			= ecovec_dvi_modes;
-		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_dvi_modes);
+		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
@@ -1123,8 +1123,8 @@ static int __init arch_setup(void)
 		/* Panel */
 		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
 		lcdc_info.ch[0].clock_divider		= 2;
-		lcdc_info.ch[0].lcd_cfg			= ecovec_lcd_modes;
-		lcdc_info.ch[0].num_cfg			= ARRAY_SIZE(ecovec_lcd_modes);
+		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
 
 		gpio_set_value(GPIO_PTR1, 1);
 
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 77d5a60d64f..d04a55d3b87 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -148,8 +148,8 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 		.interface_type = SYS18,
 		.clock_divider = 6,
 		.flags = LCDC_FLAGS_DWPOL,
-		.lcd_cfg = kfr2r09_lcdc_modes,
-		.num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
+		.lcd_modes = kfr2r09_lcdc_modes,
+		.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
 		.panel_cfg = {
 			.width = 35,
 			.height = 58,
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 93a1c9109ab..ff6f69c6906 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -246,8 +246,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = RGB16,
 		.clock_divider = 2,
-		.lcd_cfg = migor_lcd_modes,
-		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
 		.panel_cfg = { /* 7.0 inch */
 			.width = 152,
 			.height = 91,
@@ -260,8 +260,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 		.fourcc = V4L2_PIX_FMT_RGB565,
 		.interface_type = SYS16A,
 		.clock_divider = 10,
-		.lcd_cfg = migor_lcd_modes,
-		.num_cfg = ARRAY_SIZE(migor_lcd_modes),
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
 		.panel_cfg = {
 			.width = 49,	/* 2.4 inch */
 			.height = 37,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index a468398bfb3..9bf528b4ae2 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -886,12 +886,12 @@ static int __init devices_setup(void)
 
 	if (sw & SW41_B) {
 		/* 720p */
-		lcdc_info.ch[0].lcd_cfg	= lcdc_720p_modes;
-		lcdc_info.ch[0].num_cfg	= ARRAY_SIZE(lcdc_720p_modes);
+		lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
 	} else {
 		/* VGA */
-		lcdc_info.ch[0].lcd_cfg	= lcdc_vga_modes;
-		lcdc_info.ch[0].num_cfg	= ARRAY_SIZE(lcdc_vga_modes);
+		lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
 	}
 
 	if (sw & SW41_A) {
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 5ff3742aeb0..42ad0f707e8 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -147,77 +147,77 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 		pctype = 0;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
 		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = ch->lcd_cfg[0].xres * 3;
+		linelength = ch->lcd_modes[0].xres * 3;
 		yuv = false;
 		break;
 	case MIPI_RGB565:
 		pctype = 1;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
 		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = ch->lcd_cfg[0].xres * 2;
+		linelength = ch->lcd_modes[0].xres * 2;
 		yuv = false;
 		break;
 	case MIPI_RGB666_LP:
 		pctype = 2;
 		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
 		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = ch->lcd_cfg[0].xres * 3;
+		linelength = ch->lcd_modes[0].xres * 3;
 		yuv = false;
 		break;
 	case MIPI_RGB666:
 		pctype = 3;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
 		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
-		linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
+		linelength = (ch->lcd_modes[0].xres * 18 + 7) / 8;
 		yuv = false;
 		break;
 	case MIPI_BGR888:
 		pctype = 8;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
 		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = ch->lcd_cfg[0].xres * 3;
+		linelength = ch->lcd_modes[0].xres * 3;
 		yuv = false;
 		break;
 	case MIPI_BGR565:
 		pctype = 9;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
 		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = ch->lcd_cfg[0].xres * 2;
+		linelength = ch->lcd_modes[0].xres * 2;
 		yuv = false;
 		break;
 	case MIPI_BGR666_LP:
 		pctype = 0xa;
 		datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
 		pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
-		linelength = ch->lcd_cfg[0].xres * 3;
+		linelength = ch->lcd_modes[0].xres * 3;
 		yuv = false;
 		break;
 	case MIPI_BGR666:
 		pctype = 0xb;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
 		pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
-		linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
+		linelength = (ch->lcd_modes[0].xres * 18 + 7) / 8;
 		yuv = false;
 		break;
 	case MIPI_YUYV:
 		pctype = 4;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
 		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = ch->lcd_cfg[0].xres * 2;
+		linelength = ch->lcd_modes[0].xres * 2;
 		yuv = true;
 		break;
 	case MIPI_UYVY:
 		pctype = 5;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
 		pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
-		linelength = ch->lcd_cfg[0].xres * 2;
+		linelength = ch->lcd_modes[0].xres * 2;
 		yuv = true;
 		break;
 	case MIPI_YUV420_L:
 		pctype = 6;
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
 		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
-		linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8;
+		linelength = (ch->lcd_modes[0].xres * 12 + 7) / 8;
 		yuv = true;
 		break;
 	case MIPI_YUV420:
@@ -225,7 +225,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 		datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
 		pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
 		/* Length of U/V line */
-		linelength = (ch->lcd_cfg[0].xres + 1) / 2;
+		linelength = (ch->lcd_modes[0].xres + 1) / 2;
 		yuv = true;
 		break;
 	default:
@@ -294,7 +294,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	 */
 	iowrite32(0x00000006, mipi->linkbase + DTCTR);
 	/* VSYNC width = 2 (<< 17) */
-	iowrite32((ch->lcd_cfg[0].vsync_len << pdata->vsynw_offset) |
+	iowrite32((ch->lcd_modes[0].vsync_len << pdata->vsynw_offset) |
 		  (pdata->clksrc << 16) | (pctype << 12) | datatype,
 		  mipi->linkbase + VMCTR1);
 
@@ -328,7 +328,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	top = linelength << 16; /* RGBLEN */
 	bottom = 0x00000001;
 	if (pdata->flags & SH_MIPI_DSI_HSABM) /* HSALEN */
-		bottom = (pdata->lane * ch->lcd_cfg[0].hsync_len) - 10;
+		bottom = (pdata->lane * ch->lcd_modes[0].hsync_len) - 10;
 	iowrite32(top | bottom , mipi->linkbase + VMLEN1);
 
 	/*
@@ -348,18 +348,18 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 		div = 2;
 
 	if (pdata->flags & SH_MIPI_DSI_HFPBM) {	/* HBPLEN */
-		top = ch->lcd_cfg[0].hsync_len + ch->lcd_cfg[0].left_margin;
+		top = ch->lcd_modes[0].hsync_len + ch->lcd_modes[0].left_margin;
 		top = ((pdata->lane * top / div) - 10) << 16;
 	}
 	if (pdata->flags & SH_MIPI_DSI_HBPBM) { /* HFPLEN */
-		bottom = ch->lcd_cfg[0].right_margin;
+		bottom = ch->lcd_modes[0].right_margin;
 		bottom = (pdata->lane * bottom / div) - 12;
 	}
 
-	bpp = linelength / ch->lcd_cfg[0].xres; /* byte / pixel */
+	bpp = linelength / ch->lcd_modes[0].xres; /* byte / pixel */
 	if ((pdata->lane / div) > bpp) {
-		tmp = ch->lcd_cfg[0].xres / bpp; /* output cycle */
-		tmp = ch->lcd_cfg[0].xres - tmp; /* (input - output) cycle */
+		tmp = ch->lcd_modes[0].xres / bpp; /* output cycle */
+		tmp = ch->lcd_modes[0].xres - tmp; /* (input - output) cycle */
 		delay = (pdata->lane * tmp);
 	}
 
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 422fcfd3cf2..ab7b1797584 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1191,8 +1191,8 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 	 * distance between two modes is defined as the size of the
 	 * non-overlapping parts of the two rectangles.
 	 */
-	for (i = 0; i < ch->cfg.num_cfg; ++i) {
-		const struct fb_videomode *mode = &ch->cfg.lcd_cfg[i];
+	for (i = 0; i < ch->cfg.num_modes; ++i) {
+		const struct fb_videomode *mode = &ch->cfg.lcd_modes[i];
 		unsigned int dist;
 
 		/* We can only round up. */
@@ -1211,7 +1211,7 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 	}
 
 	/* If no available mode can be used, return an error. */
-	if (ch->cfg.num_cfg != 0) {
+	if (ch->cfg.num_modes != 0) {
 		if (best_dist == (unsigned int)-1)
 			return -EINVAL;
 
@@ -1671,7 +1671,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	struct fb_var_screeninfo *var;
 	struct fb_info *info;
 	unsigned int max_size;
-	int num_cfg;
+	int num_modes;
 	void *buf;
 	int ret;
 	int i;
@@ -1698,7 +1698,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	max_mode = NULL;
 	max_size = 0;
 
-	for (i = 0, mode = cfg->lcd_cfg; i < cfg->num_cfg; i++, mode++) {
+	for (i = 0, mode = cfg->lcd_modes; i < cfg->num_modes; i++, mode++) {
 		unsigned int size = mode->yres * mode->xres;
 
 		/* NV12/NV21 buffers must have even number of lines */
@@ -1722,15 +1722,15 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 			max_mode->xres, max_mode->yres);
 
 	/* Create the mode list. */
-	if (cfg->lcd_cfg == NULL) {
+	if (cfg->lcd_modes == NULL) {
 		mode = &default_720p;
-		num_cfg = 1;
+		num_modes = 1;
 	} else {
-		mode = cfg->lcd_cfg;
-		num_cfg = cfg->num_cfg;
+		mode = cfg->lcd_modes;
+		num_modes = cfg->num_modes;
 	}
 
-	fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
+	fb_videomode_to_modelist(mode, num_modes, &info->modelist);
 
 	/* Initialize the transmitter device if present. */
 	if (cfg->tx_dev) {
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 4f0fb559ea8..484b0a2d7b2 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -173,8 +173,8 @@ struct sh_mobile_lcdc_chan_cfg {
 	int interface_type; /* selects RGBn or SYSn I/F, see above */
 	int clock_divider;
 	unsigned long flags; /* LCDC_FLAGS_... */
-	const struct fb_videomode *lcd_cfg;
-	int num_cfg;
+	const struct fb_videomode *lcd_modes;
+	int num_modes;
 	struct sh_mobile_lcdc_panel_cfg panel_cfg;
 	struct sh_mobile_lcdc_bl_info bl_info;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
-- 
cgit v1.2.3-70-g09d2


From 740f802af2d8c46f1423b6b3daa33e4e1ea223f0 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 14:03:17 +0100
Subject: fbdev: sh_mobile_lcdc: Reorganize the sh_mobile_lcdc_chan structure

Group fields by purpose, and make the separation between core fields and
FB-related fields clear.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.h | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index c1753877b4e..8e0d0099940 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -53,30 +53,22 @@ struct sh_mobile_lcdc_entity {
 struct sh_mobile_lcdc_chan {
 	struct sh_mobile_lcdc_priv *lcdc;
 	struct sh_mobile_lcdc_entity *tx_dev;
+	struct sh_mobile_lcdc_chan_cfg cfg;
 
 	unsigned long *reg_offs;
 	unsigned long ldmt1r_value;
 	unsigned long enabled; /* ME and SE in LDCNT2R */
-	struct sh_mobile_lcdc_chan_cfg cfg;
-	u32 pseudo_palette[PALETTE_NR];
-	struct fb_info *info;
-	struct backlight_device *bl;
+	int meram_enabled;
+
+	struct mutex open_lock;		/* protects the use counter */
+	int use_count;
+
 	dma_addr_t dma_handle;
-	struct fb_deferred_io defio;
-	struct scatterlist *sglist;
-	unsigned long frame_end;
 	unsigned long pan_offset;
+
+	unsigned long frame_end;
 	wait_queue_head_t frame_end_wait;
 	struct completion vsync_completion;
-	struct {
-		unsigned int width;
-		unsigned int height;
-		struct fb_videomode mode;
-	} display;
-	int use_count;
-	int blank_status;
-	struct mutex open_lock;		/* protects the use counter */
-	int meram_enabled;
 
 	unsigned long base_addr_y;
 	unsigned long base_addr_c;
@@ -86,6 +78,21 @@ struct sh_mobile_lcdc_chan {
 		      enum sh_mobile_lcdc_entity_event event,
 		      const struct fb_videomode *mode,
 		      const struct fb_monspecs *monspec);
+
+	/* Backlight */
+	struct backlight_device *bl;
+
+	/* FB */
+	struct fb_info *info;
+	u32 pseudo_palette[PALETTE_NR];
+	struct {
+		unsigned int width;
+		unsigned int height;
+		struct fb_videomode mode;
+	} display;
+	struct fb_deferred_io defio;
+	struct scatterlist *sglist;
+	int blank_status;
 };
 
 #endif
-- 
cgit v1.2.3-70-g09d2


From 105784bbb47cd76f0fc32954b047a13b704fa840 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 15:58:10 +0100
Subject: fbdev: sh_mobile_lcdc: Add sh_mobile_format_info() function

The function returns a pointer to a structure describing a format based
on its fourcc. Use the function where applicable instead of hardcoded
switch-case statements.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 174 +++++++++++++++++++++++----------------
 1 file changed, 102 insertions(+), 72 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index ab7b1797584..c66f0f4fe3d 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -449,6 +449,75 @@ static int sh_mobile_lcdc_display_notify(struct sh_mobile_lcdc_chan *ch,
  * Format helpers
  */
 
+struct sh_mobile_lcdc_format_info {
+	u32 fourcc;
+	unsigned int bpp;
+	bool yuv;
+	u32 lddfr;
+};
+
+static const struct sh_mobile_lcdc_format_info sh_mobile_format_infos[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.bpp = 16,
+		.yuv = false,
+		.lddfr = LDDFR_PKF_RGB16,
+	}, {
+		.fourcc = V4L2_PIX_FMT_BGR24,
+		.bpp = 24,
+		.yuv = false,
+		.lddfr = LDDFR_PKF_RGB24,
+	}, {
+		.fourcc = V4L2_PIX_FMT_BGR32,
+		.bpp = 32,
+		.yuv = false,
+		.lddfr = LDDFR_PKF_ARGB32,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV12,
+		.bpp = 12,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_420,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV21,
+		.bpp = 12,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_420,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV16,
+		.bpp = 16,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_422,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV61,
+		.bpp = 16,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_422,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV24,
+		.bpp = 24,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_444,
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV42,
+		.bpp = 24,
+		.yuv = true,
+		.lddfr = LDDFR_CC | LDDFR_YF_444,
+	},
+};
+
+static const struct sh_mobile_lcdc_format_info *
+sh_mobile_format_info(u32 fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh_mobile_format_infos); ++i) {
+		if (sh_mobile_format_infos[i].fourcc == fourcc)
+			return &sh_mobile_format_infos[i];
+	}
+
+	return NULL;
+}
+
 static int sh_mobile_format_fourcc(const struct fb_var_screeninfo *var)
 {
 	if (var->grayscale > 1)
@@ -473,21 +542,13 @@ static int sh_mobile_format_is_fourcc(const struct fb_var_screeninfo *var)
 
 static bool sh_mobile_format_is_yuv(const struct fb_var_screeninfo *var)
 {
+	const struct sh_mobile_lcdc_format_info *format;
+
 	if (var->grayscale <= 1)
 		return false;
 
-	switch (var->grayscale) {
-	case V4L2_PIX_FMT_NV12:
-	case V4L2_PIX_FMT_NV21:
-	case V4L2_PIX_FMT_NV16:
-	case V4L2_PIX_FMT_NV61:
-	case V4L2_PIX_FMT_NV24:
-	case V4L2_PIX_FMT_NV42:
-		return true;
-
-	default:
-		return false;
-	}
+	format = sh_mobile_format_info(var->grayscale);
+	return format ? format->yuv : false;
 }
 
 /* -----------------------------------------------------------------------------
@@ -667,37 +728,20 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 	/* Setup geometry, format, frame buffer memory and operation mode. */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		const struct sh_mobile_lcdc_format_info *format;
+		u32 fourcc;
+
 		ch = &priv->ch[k];
 		if (!ch->enabled)
 			continue;
 
 		sh_mobile_lcdc_geometry(ch);
 
-		switch (sh_mobile_format_fourcc(&ch->info->var)) {
-		case V4L2_PIX_FMT_RGB565:
-			tmp = LDDFR_PKF_RGB16;
-			break;
-		case V4L2_PIX_FMT_BGR24:
-			tmp = LDDFR_PKF_RGB24;
-			break;
-		case V4L2_PIX_FMT_BGR32:
-			tmp = LDDFR_PKF_ARGB32;
-			break;
-		case V4L2_PIX_FMT_NV12:
-		case V4L2_PIX_FMT_NV21:
-			tmp = LDDFR_CC | LDDFR_YF_420;
-			break;
-		case V4L2_PIX_FMT_NV16:
-		case V4L2_PIX_FMT_NV61:
-			tmp = LDDFR_CC | LDDFR_YF_422;
-			break;
-		case V4L2_PIX_FMT_NV24:
-		case V4L2_PIX_FMT_NV42:
-			tmp = LDDFR_CC | LDDFR_YF_444;
-			break;
-		}
+		fourcc = sh_mobile_format_fourcc(&ch->info->var);
+		format = sh_mobile_format_info(fourcc);
+		tmp = format->lddfr;
 
-		if (sh_mobile_format_is_yuv(&ch->info->var)) {
+		if (format->yuv) {
 			switch (ch->info->var.colorspace) {
 			case V4L2_COLORSPACE_REC709:
 				tmp |= LDDFR_CF1;
@@ -711,7 +755,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		lcdc_write_chan(ch, LDDFR, tmp);
 		lcdc_write_chan(ch, LDMLSR, ch->pitch);
 		lcdc_write_chan(ch, LDSA1R, ch->base_addr_y);
-		if (sh_mobile_format_is_yuv(&ch->info->var))
+		if (format->yuv)
 			lcdc_write_chan(ch, LDSA2R, ch->base_addr_c);
 
 		/* When using deferred I/O mode, configure the LCDC for one-shot
@@ -1228,32 +1272,17 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 		var->yres_virtual = var->yres;
 
 	if (sh_mobile_format_is_fourcc(var)) {
-		switch (var->grayscale) {
-		case V4L2_PIX_FMT_NV12:
-		case V4L2_PIX_FMT_NV21:
-			var->bits_per_pixel = 12;
-			break;
-		case V4L2_PIX_FMT_RGB565:
-		case V4L2_PIX_FMT_NV16:
-		case V4L2_PIX_FMT_NV61:
-			var->bits_per_pixel = 16;
-			break;
-		case V4L2_PIX_FMT_BGR24:
-		case V4L2_PIX_FMT_NV24:
-		case V4L2_PIX_FMT_NV42:
-			var->bits_per_pixel = 24;
-			break;
-		case V4L2_PIX_FMT_BGR32:
-			var->bits_per_pixel = 32;
-			break;
-		default:
+		const struct sh_mobile_lcdc_format_info *format;
+
+		format = sh_mobile_format_info(var->grayscale);
+		if (format == NULL)
 			return -EINVAL;
-		}
+		var->bits_per_pixel = format->bpp;
 
 		/* Default to RGB and JPEG color-spaces for RGB and YUV formats
 		 * respectively.
 		 */
-		if (!sh_mobile_format_is_yuv(var))
+		if (!format->yuv)
 			var->colorspace = V4L2_COLORSPACE_SRGB;
 		else if (var->colorspace != V4L2_COLORSPACE_REC709)
 			var->colorspace = V4L2_COLORSPACE_JPEG;
@@ -1665,6 +1694,7 @@ static int __devinit
 sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 			    struct sh_mobile_lcdc_chan *ch)
 {
+	const struct sh_mobile_lcdc_format_info *format;
 	struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
 	const struct fb_videomode *max_mode;
 	const struct fb_videomode *mode;
@@ -1679,6 +1709,13 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	mutex_init(&ch->open_lock);
 	ch->notify = sh_mobile_lcdc_display_notify;
 
+	/* Validate the format. */
+	format = sh_mobile_format_info(cfg->fourcc);
+	if (format == NULL) {
+		dev_err(priv->dev, "Invalid FOURCC %08x.\n", cfg->fourcc);
+		return -EINVAL;
+	}
+
 	/* Allocate the frame buffer device. */
 	ch->info = framebuffer_alloc(0, priv->dev);
 	if (!ch->info) {
@@ -1756,20 +1793,13 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	var->yres_virtual = var->yres * 2;
 	var->activate = FB_ACTIVATE_NOW;
 
-	switch (cfg->fourcc) {
-	case V4L2_PIX_FMT_RGB565:
-		var->bits_per_pixel = 16;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		var->bits_per_pixel = 24;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-		var->bits_per_pixel = 32;
-		break;
-	default:
+	/* Use the legacy API by default for RGB formats, and the FOURCC API
+	 * for YUV formats.
+	 */
+	if (!format->yuv)
+		var->bits_per_pixel = format->bpp;
+	else
 		var->grayscale = cfg->fourcc;
-		break;
-	}
 
 	/* Make sure the memory size check won't fail. smem_len is initialized
 	 * later based on var.
@@ -1806,7 +1836,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	    cfg->fourcc == V4L2_PIX_FMT_NV21)
 		info->fix.ypanstep = 2;
 
-	if (sh_mobile_format_is_yuv(var)) {
+	if (format->yuv) {
 		info->fix.line_length = var->xres;
 		info->fix.visual = FB_VISUAL_FOURCC;
 	} else {
-- 
cgit v1.2.3-70-g09d2


From fc9e78e6b3d2ba2e96426527b8231f6b7c7b7b96 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 16:05:36 +0100
Subject: fbdev: sh_mobile_lcdc: Store the format in struct sh_mobile_lcdc_chan

Store the active format in the channel structure, and use it instead of
parsing info->var all over the place when the format is needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 21 ++++++++++-----------
 drivers/video/sh_mobile_lcdcfb.h |  4 +++-
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index c66f0f4fe3d..6d8c30bf425 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -728,20 +728,15 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 	/* Setup geometry, format, frame buffer memory and operation mode. */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
-		const struct sh_mobile_lcdc_format_info *format;
-		u32 fourcc;
-
 		ch = &priv->ch[k];
 		if (!ch->enabled)
 			continue;
 
 		sh_mobile_lcdc_geometry(ch);
 
-		fourcc = sh_mobile_format_fourcc(&ch->info->var);
-		format = sh_mobile_format_info(fourcc);
-		tmp = format->lddfr;
+		tmp = ch->format->lddfr;
 
-		if (format->yuv) {
+		if (ch->format->yuv) {
 			switch (ch->info->var.colorspace) {
 			case V4L2_COLORSPACE_REC709:
 				tmp |= LDDFR_CF1;
@@ -755,7 +750,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		lcdc_write_chan(ch, LDDFR, tmp);
 		lcdc_write_chan(ch, LDMLSR, ch->pitch);
 		lcdc_write_chan(ch, LDSA1R, ch->base_addr_y);
-		if (format->yuv)
+		if (ch->format->yuv)
 			lcdc_write_chan(ch, LDSA2R, ch->base_addr_c);
 
 		/* When using deferred I/O mode, configure the LCDC for one-shot
@@ -772,7 +767,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	}
 
 	/* Word and long word swap. */
-	switch (sh_mobile_format_fourcc(&priv->ch[0].info->var)) {
+	switch (priv->ch[0].format->fourcc) {
 	case V4L2_PIX_FMT_RGB565:
 	case V4L2_PIX_FMT_NV21:
 	case V4L2_PIX_FMT_NV61:
@@ -859,7 +854,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			ch->meram_enabled = 0;
 		}
 
-		switch (sh_mobile_format_fourcc(&ch->info->var)) {
+		switch (ch->format->fourcc) {
 		case V4L2_PIX_FMT_NV12:
 		case V4L2_PIX_FMT_NV21:
 		case V4L2_PIX_FMT_NV16:
@@ -1065,7 +1060,7 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 			    + info->var.xres * info->var.yres_virtual
 			    + c_offset;
 		/* Set x offset */
-		if (sh_mobile_format_fourcc(&info->var) == V4L2_PIX_FMT_NV24)
+		if (ch->format->fourcc == V4L2_PIX_FMT_NV24)
 			base_addr_c += 2 * var->xoffset;
 		else
 			base_addr_c += var->xoffset;
@@ -1353,6 +1348,8 @@ static int sh_mobile_set_par(struct fb_info *info)
 		info->fix.line_length = info->var.xres
 				      * info->var.bits_per_pixel / 8;
 
+	ch->format = sh_mobile_format_info(sh_mobile_format_fourcc(&info->var));
+
 	ret = sh_mobile_lcdc_start(ch->lcdc);
 	if (ret < 0) {
 		dev_err(info->dev, "%s: unable to restart LCDC\n", __func__);
@@ -1716,6 +1713,8 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		return -EINVAL;
 	}
 
+	ch->format = format;
+
 	/* Allocate the frame buffer device. */
 	ch->info = framebuffer_alloc(0, priv->dev);
 	if (!ch->info) {
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 8e0d0099940..5ef7559b88c 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -17,9 +17,10 @@ enum { LDDCKPAT1R, LDDCKPAT2R, LDMT1R, LDMT2R, LDMT3R, LDDFR, LDSM1R,
 struct backlight_device;
 struct fb_info;
 struct module;
+struct sh_mobile_lcdc_chan;
 struct sh_mobile_lcdc_entity;
+struct sh_mobile_lcdc_format_info;
 struct sh_mobile_lcdc_priv;
-struct sh_mobile_lcdc_chan;
 
 #define SH_MOBILE_LCDC_DISPLAY_DISCONNECTED	0
 #define SH_MOBILE_LCDC_DISPLAY_CONNECTED	1
@@ -70,6 +71,7 @@ struct sh_mobile_lcdc_chan {
 	wait_queue_head_t frame_end_wait;
 	struct completion vsync_completion;
 
+	const struct sh_mobile_lcdc_format_info *format;
 	unsigned long base_addr_y;
 	unsigned long base_addr_c;
 	unsigned int pitch;
-- 
cgit v1.2.3-70-g09d2


From a67f379d3648746be0dab7b616f2fb838ec0fdfb Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 14:37:35 +0100
Subject: fbdev: sh_mobile_lcdc: Split fb init/cleanup from channel
 init/cleanup

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 285 +++++++++++++++++++++------------------
 drivers/video/sh_mobile_lcdcfb.h |   2 +
 2 files changed, 159 insertions(+), 128 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 6d8c30bf425..1f8dd83b5fe 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1427,6 +1427,141 @@ static struct fb_ops sh_mobile_lcdc_ops = {
 	.fb_set_par	= sh_mobile_set_par,
 };
 
+static void
+sh_mobile_lcdc_channel_fb_unregister(struct sh_mobile_lcdc_chan *ch)
+{
+	if (ch->info && ch->info->dev)
+		unregister_framebuffer(ch->info);
+}
+
+static int __devinit
+sh_mobile_lcdc_channel_fb_register(struct sh_mobile_lcdc_chan *ch)
+{
+	struct fb_info *info = ch->info;
+	int ret;
+
+	if (info->fbdefio) {
+		ch->sglist = vmalloc(sizeof(struct scatterlist) *
+				     ch->fb_size >> PAGE_SHIFT);
+		if (!ch->sglist) {
+			dev_err(ch->lcdc->dev, "cannot allocate sglist\n");
+			return -ENOMEM;
+		}
+	}
+
+	info->bl_dev = ch->bl;
+
+	ret = register_framebuffer(info);
+	if (ret < 0)
+		return ret;
+
+	dev_info(ch->lcdc->dev, "registered %s/%s as %dx%d %dbpp.\n",
+		 dev_name(ch->lcdc->dev), (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
+		 "mainlcd" : "sublcd", info->var.xres, info->var.yres,
+		 info->var.bits_per_pixel);
+
+	/* deferred io mode: disable clock to save power */
+	if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
+		sh_mobile_lcdc_clk_off(ch->lcdc);
+
+	return ret;
+}
+
+static void
+sh_mobile_lcdc_channel_fb_cleanup(struct sh_mobile_lcdc_chan *ch)
+{
+	struct fb_info *info = ch->info;
+
+	if (!info || !info->device)
+		return;
+
+	if (ch->sglist)
+		vfree(ch->sglist);
+
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+}
+
+static int __devinit
+sh_mobile_lcdc_channel_fb_init(struct sh_mobile_lcdc_chan *ch,
+			       const struct fb_videomode *mode,
+			       unsigned int num_modes)
+{
+	struct sh_mobile_lcdc_priv *priv = ch->lcdc;
+	struct fb_var_screeninfo *var;
+	struct fb_info *info;
+	int ret;
+
+	/* Allocate and initialize the frame buffer device. Create the modes
+	 * list and allocate the color map.
+	 */
+	info = framebuffer_alloc(0, priv->dev);
+	if (info == NULL) {
+		dev_err(priv->dev, "unable to allocate fb_info\n");
+		return -ENOMEM;
+	}
+
+	ch->info = info;
+
+	info->flags = FBINFO_FLAG_DEFAULT;
+	info->fbops = &sh_mobile_lcdc_ops;
+	info->device = priv->dev;
+	info->screen_base = ch->fb_mem;
+	info->pseudo_palette = &ch->pseudo_palette;
+	info->par = ch;
+
+	fb_videomode_to_modelist(mode, num_modes, &info->modelist);
+
+	ret = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
+	if (ret < 0) {
+		dev_err(priv->dev, "unable to allocate cmap\n");
+		return ret;
+	}
+
+	/* Initialize fixed screen information. Restrict pan to 2 lines steps
+	 * for NV12 and NV21.
+	 */
+	info->fix = sh_mobile_lcdc_fix;
+	info->fix.smem_start = ch->dma_handle;
+	info->fix.smem_len = ch->fb_size;
+	if (ch->format->fourcc == V4L2_PIX_FMT_NV12 ||
+	    ch->format->fourcc == V4L2_PIX_FMT_NV21)
+		info->fix.ypanstep = 2;
+
+	/* Initialize variable screen information using the first mode as
+	 * default. The default Y virtual resolution is twice the panel size to
+	 * allow for double-buffering.
+	 */
+	var = &info->var;
+	fb_videomode_to_var(var, mode);
+	var->width = ch->cfg.panel_cfg.width;
+	var->height = ch->cfg.panel_cfg.height;
+	var->yres_virtual = var->yres * 2;
+	var->activate = FB_ACTIVATE_NOW;
+
+	/* Use the legacy API by default for RGB formats, and the FOURCC API
+	 * for YUV formats.
+	 */
+	if (!ch->format->yuv)
+		var->bits_per_pixel = ch->format->bpp;
+	else
+		var->grayscale = ch->format->fourcc;
+
+	ret = sh_mobile_check_var(var, info);
+	if (ret)
+		return ret;
+
+	if (ch->format->yuv) {
+		info->fix.line_length = var->xres;
+		info->fix.visual = FB_VISUAL_FOURCC;
+	} else {
+		info->fix.line_length = var->xres * ch->format->bpp / 8;
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	}
+
+	return 0;
+}
+
 /* -----------------------------------------------------------------------------
  * Backlight
  */
@@ -1595,37 +1730,28 @@ static const struct fb_videomode default_720p __devinitconst = {
 static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 {
 	struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev);
-	struct fb_info *info;
 	int i;
 
 	fb_unregister_client(&priv->notifier);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
-		if (priv->ch[i].info && priv->ch[i].info->dev)
-			unregister_framebuffer(priv->ch[i].info);
+		sh_mobile_lcdc_channel_fb_unregister(&priv->ch[i]);
 
 	sh_mobile_lcdc_stop(priv);
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
 		struct sh_mobile_lcdc_chan *ch = &priv->ch[i];
 
-		info = ch->info;
-		if (!info || !info->device)
-			continue;
-
 		if (ch->tx_dev) {
 			ch->tx_dev->lcdc = NULL;
 			module_put(ch->cfg.tx_dev->dev.driver->owner);
 		}
 
-		if (ch->sglist)
-			vfree(ch->sglist);
+		sh_mobile_lcdc_channel_fb_cleanup(ch);
 
-		if (info->screen_base)
-			dma_free_coherent(&pdev->dev, info->fix.smem_len,
-					  info->screen_base, ch->dma_handle);
-		fb_dealloc_cmap(&info->cmap);
-		framebuffer_release(info);
+		if (ch->fb_mem)
+			dma_free_coherent(&pdev->dev, ch->fb_size,
+					  ch->fb_mem, ch->dma_handle);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
@@ -1695,13 +1821,9 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 	struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
 	const struct fb_videomode *max_mode;
 	const struct fb_videomode *mode;
-	struct fb_var_screeninfo *var;
-	struct fb_info *info;
+	unsigned int num_modes;
 	unsigned int max_size;
-	int num_modes;
-	void *buf;
-	int ret;
-	int i;
+	unsigned int i;
 
 	mutex_init(&ch->open_lock);
 	ch->notify = sh_mobile_lcdc_display_notify;
@@ -1715,19 +1837,6 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 
 	ch->format = format;
 
-	/* Allocate the frame buffer device. */
-	ch->info = framebuffer_alloc(0, priv->dev);
-	if (!ch->info) {
-		dev_err(priv->dev, "unable to allocate fb_info\n");
-		return -ENOMEM;
-	}
-
-	info = ch->info;
-	info->fbops = &sh_mobile_lcdc_ops;
-	info->par = ch;
-	info->pseudo_palette = &ch->pseudo_palette;
-	info->flags = FBINFO_FLAG_DEFAULT;
-
 	/* Iterate through the modes to validate them and find the highest
 	 * resolution.
 	 */
@@ -1757,7 +1866,6 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		dev_dbg(priv->dev, "Found largest videomode %ux%u\n",
 			max_mode->xres, max_mode->yres);
 
-	/* Create the mode list. */
 	if (cfg->lcd_modes == NULL) {
 		mode = &default_720p;
 		num_modes = 1;
@@ -1766,7 +1874,18 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		num_modes = cfg->num_modes;
 	}
 
-	fb_videomode_to_modelist(mode, num_modes, &info->modelist);
+	ch->display.width = cfg->panel_cfg.width;
+	ch->display.height = cfg->panel_cfg.height;
+	ch->display.mode = *mode;
+
+	/* Allocate frame buffer memory. */
+	ch->fb_size = max_size * format->bpp / 8 * 2;
+	ch->fb_mem = dma_alloc_coherent(priv->dev, ch->fb_size, &ch->dma_handle,
+					GFP_KERNEL);
+	if (ch->fb_mem == NULL) {
+		dev_err(priv->dev, "unable to allocate buffer\n");
+		return -ENOMEM;
+	}
 
 	/* Initialize the transmitter device if present. */
 	if (cfg->tx_dev) {
@@ -1781,76 +1900,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		ch->tx_dev->def_mode = *mode;
 	}
 
-	/* Initialize variable screen information using the first mode as
-	 * default. The default Y virtual resolution is twice the panel size to
-	 * allow for double-buffering.
-	 */
-	var = &info->var;
-	fb_videomode_to_var(var, mode);
-	var->width = cfg->panel_cfg.width;
-	var->height = cfg->panel_cfg.height;
-	var->yres_virtual = var->yres * 2;
-	var->activate = FB_ACTIVATE_NOW;
-
-	/* Use the legacy API by default for RGB formats, and the FOURCC API
-	 * for YUV formats.
-	 */
-	if (!format->yuv)
-		var->bits_per_pixel = format->bpp;
-	else
-		var->grayscale = cfg->fourcc;
-
-	/* Make sure the memory size check won't fail. smem_len is initialized
-	 * later based on var.
-	 */
-	info->fix.smem_len = UINT_MAX;
-	ret = sh_mobile_check_var(var, info);
-	if (ret)
-		return ret;
-
-	max_size = max_size * var->bits_per_pixel / 8 * 2;
-
-	/* Allocate frame buffer memory and color map. */
-	buf = dma_alloc_coherent(priv->dev, max_size, &ch->dma_handle,
-				 GFP_KERNEL);
-	if (!buf) {
-		dev_err(priv->dev, "unable to allocate buffer\n");
-		return -ENOMEM;
-	}
-
-	ret = fb_alloc_cmap(&info->cmap, PALETTE_NR, 0);
-	if (ret < 0) {
-		dev_err(priv->dev, "unable to allocate cmap\n");
-		dma_free_coherent(priv->dev, max_size, buf, ch->dma_handle);
-		return ret;
-	}
-
-	/* Initialize fixed screen information. Restrict pan to 2 lines steps
-	 * for NV12 and NV21.
-	 */
-	info->fix = sh_mobile_lcdc_fix;
-	info->fix.smem_start = ch->dma_handle;
-	info->fix.smem_len = max_size;
-	if (cfg->fourcc == V4L2_PIX_FMT_NV12 ||
-	    cfg->fourcc == V4L2_PIX_FMT_NV21)
-		info->fix.ypanstep = 2;
-
-	if (format->yuv) {
-		info->fix.line_length = var->xres;
-		info->fix.visual = FB_VISUAL_FOURCC;
-	} else {
-		info->fix.line_length = var->xres * var->bits_per_pixel / 8;
-		info->fix.visual = FB_VISUAL_TRUECOLOR;
-	}
-
-	info->screen_base = buf;
-	info->device = priv->dev;
-
-	ch->display.width = cfg->panel_cfg.width;
-	ch->display.height = cfg->panel_cfg.height;
-	ch->display.mode = *mode;
-
-	return 0;
+	return sh_mobile_lcdc_channel_fb_init(ch, mode, num_modes);
 }
 
 static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
@@ -1966,31 +2016,10 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < num_channels; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
-		struct fb_info *info = ch->info;
-
-		if (info->fbdefio) {
-			ch->sglist = vmalloc(sizeof(struct scatterlist) *
-					info->fix.smem_len >> PAGE_SHIFT);
-			if (!ch->sglist) {
-				dev_err(&pdev->dev, "cannot allocate sglist\n");
-				goto err1;
-			}
-		}
 
-		info->bl_dev = ch->bl;
-
-		error = register_framebuffer(info);
-		if (error < 0)
+		error = sh_mobile_lcdc_channel_fb_register(ch);
+		if (error)
 			goto err1;
-
-		dev_info(&pdev->dev, "registered %s/%s as %dx%d %dbpp.\n",
-			 pdev->name, (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
-			 "mainlcd" : "sublcd", info->var.xres, info->var.yres,
-			 info->var.bits_per_pixel);
-
-		/* deferred io mode: disable clock to save power */
-		if (info->fbdefio || info->state == FBINFO_STATE_SUSPENDED)
-			sh_mobile_lcdc_clk_off(priv);
 	}
 
 	/* Failure ignored */
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 5ef7559b88c..cc22b9eaaf0 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -64,6 +64,8 @@ struct sh_mobile_lcdc_chan {
 	struct mutex open_lock;		/* protects the use counter */
 	int use_count;
 
+	void *fb_mem;
+	unsigned long fb_size;
 	dma_addr_t dma_handle;
 	unsigned long pan_offset;
 
-- 
cgit v1.2.3-70-g09d2


From e8363140c02c92c122210e03103aef72dd836664 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 29 Nov 2011 14:37:35 +0100
Subject: fbdev: sh_mobile_lcdc: Pass physical device pointer to DMA functions

The dma_map_sg() and dma_unmap_sg() functions need a pointer to the
physical device.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 1f8dd83b5fe..fc12e37b55c 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -313,11 +313,12 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 		unsigned int nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
 
 		/* trigger panel update */
-		dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+		dma_map_sg(ch->lcdc->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
 		if (panel->start_transfer)
 			panel->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
 		lcdc_write_chan(ch, LDSM2R, LDSM2R_OSTRG);
-		dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+		dma_unmap_sg(ch->lcdc->dev, ch->sglist, nr_pages,
+			     DMA_TO_DEVICE);
 	} else {
 		if (panel->start_transfer)
 			panel->start_transfer(ch, &sh_mobile_lcdc_sys_bus_ops);
-- 
cgit v1.2.3-70-g09d2


From 58f03d998de08bb15ce50ad875e41bdc281d77dd Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 30 Nov 2011 23:07:30 +0100
Subject: fbdev: sh_mobile_lcdc: Store configuration in channel structure

Store the frame buffer configuration (colorspace, visible/virtual
horizontal and vertical resolutions and line pitch) in the
sh_mobile_lcdc_chan structure, and use it instead of accessing fb_info.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 109 +++++++++++++++++++--------------------
 drivers/video/sh_mobile_lcdcfb.h |   8 ++-
 2 files changed, 61 insertions(+), 56 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index fc12e37b55c..6d377b48c13 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -273,7 +273,7 @@ static int sh_mobile_lcdc_sginit(struct fb_info *info,
 				  struct list_head *pagelist)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	unsigned int nr_pages_max = info->fix.smem_len >> PAGE_SHIFT;
+	unsigned int nr_pages_max = ch->fb_size >> PAGE_SHIFT;
 	struct page *page;
 	int nr_pages = 0;
 
@@ -541,17 +541,6 @@ static int sh_mobile_format_is_fourcc(const struct fb_var_screeninfo *var)
 	return var->grayscale > 1;
 }
 
-static bool sh_mobile_format_is_yuv(const struct fb_var_screeninfo *var)
-{
-	const struct sh_mobile_lcdc_format_info *format;
-
-	if (var->grayscale <= 1)
-		return false;
-
-	format = sh_mobile_format_info(var->grayscale);
-	return format ? format->yuv : false;
-}
-
 /* -----------------------------------------------------------------------------
  * Start, stop and IRQ
  */
@@ -650,7 +639,7 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 	h_total = mode->xres + mode->hsync_len + mode->left_margin
 		+ mode->right_margin;
 	tmp = h_total / 8; /* HTCN */
-	tmp |= (min(mode->xres, var->xres) / 8) << 16; /* HDCN */
+	tmp |= (min(mode->xres, ch->xres) / 8) << 16; /* HDCN */
 	lcdc_write_chan(ch, LDHCNR, tmp);
 
 	hsync_pos = mode->xres + mode->right_margin;
@@ -661,7 +650,7 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 	/* vertical configuration */
 	tmp = mode->yres + mode->vsync_len + mode->upper_margin
 	    + mode->lower_margin; /* VTLN */
-	tmp |= min(mode->yres, var->yres) << 16; /* VDLN */
+	tmp |= min(mode->yres, ch->yres) << 16; /* VDLN */
 	lcdc_write_chan(ch, LDVLNR, tmp);
 
 	tmp = mode->yres + mode->lower_margin; /* VSYNP */
@@ -738,7 +727,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		tmp = ch->format->lddfr;
 
 		if (ch->format->yuv) {
-			switch (ch->info->var.colorspace) {
+			switch (ch->colorspace) {
 			case V4L2_COLORSPACE_REC709:
 				tmp |= LDDFR_CF1;
 				break;
@@ -836,11 +825,8 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		if (!ch->enabled)
 			continue;
 
-		ch->base_addr_y = ch->info->fix.smem_start;
-		ch->base_addr_c = ch->base_addr_y
-				+ ch->info->var.xres
-				* ch->info->var.yres_virtual;
-		ch->pitch = ch->info->fix.line_length;
+		ch->base_addr_y = ch->dma_handle;
+		ch->base_addr_c = ch->base_addr_y + ch->xres * ch->yres_virtual;
 
 		/* Enable MERAM if possible. */
 		cfg = ch->cfg.meram_cfg;
@@ -875,7 +861,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		}
 
 		ret = mdev->ops->meram_register(mdev, cfg, ch->pitch,
-					ch->info->var.yres, pixelformat,
+					ch->yres, pixelformat,
 					ch->base_addr_y, ch->base_addr_c,
 					&ch->base_addr_y, &ch->base_addr_c,
 					&ch->pitch);
@@ -1037,14 +1023,12 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 	unsigned long new_pan_offset;
 	unsigned long base_addr_y, base_addr_c;
 	unsigned long c_offset;
-	bool yuv = sh_mobile_format_is_yuv(&info->var);
 
-	if (!yuv)
-		new_pan_offset = var->yoffset * info->fix.line_length
-			       + var->xoffset * (info->var.bits_per_pixel / 8);
+	if (!ch->format->yuv)
+		new_pan_offset = var->yoffset * ch->pitch
+			       + var->xoffset * (ch->format->bpp / 8);
 	else
-		new_pan_offset = var->yoffset * info->fix.line_length
-			       + var->xoffset;
+		new_pan_offset = var->yoffset * ch->pitch + var->xoffset;
 
 	if (new_pan_offset == ch->pan_offset)
 		return 0;	/* No change, do nothing */
@@ -1053,12 +1037,11 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 
 	/* Set the source address for the next refresh */
 	base_addr_y = ch->dma_handle + new_pan_offset;
-	if (yuv) {
+	if (ch->format->yuv) {
 		/* Set y offset */
-		c_offset = var->yoffset * info->fix.line_length
-			 * (info->var.bits_per_pixel - 8) / 8;
-		base_addr_c = ch->dma_handle
-			    + info->var.xres * info->var.yres_virtual
+		c_offset = var->yoffset * ch->pitch
+			 * (ch->format->bpp - 8) / 8;
+		base_addr_c = ch->dma_handle + ch->xres * ch->yres_virtual
 			    + c_offset;
 		/* Set x offset */
 		if (ch->format->fourcc == V4L2_PIX_FMT_NV24)
@@ -1085,7 +1068,7 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 	ch->base_addr_c = base_addr_c;
 
 	lcdc_write_chan_mirror(ch, LDSA1R, base_addr_y);
-	if (yuv)
+	if (ch->format->yuv)
 		lcdc_write_chan_mirror(ch, LDSA2R, base_addr_c);
 
 	if (lcdc_chan_is_sublcd(ch))
@@ -1338,24 +1321,28 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 static int sh_mobile_set_par(struct fb_info *info)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	u32 line_length = info->fix.line_length;
 	int ret;
 
 	sh_mobile_lcdc_stop(ch->lcdc);
 
-	if (sh_mobile_format_is_yuv(&info->var))
-		info->fix.line_length = info->var.xres;
-	else
-		info->fix.line_length = info->var.xres
-				      * info->var.bits_per_pixel / 8;
-
 	ch->format = sh_mobile_format_info(sh_mobile_format_fourcc(&info->var));
+	ch->colorspace = info->var.colorspace;
+
+	ch->xres = info->var.xres;
+	ch->xres_virtual = info->var.xres_virtual;
+	ch->yres = info->var.yres;
+	ch->yres_virtual = info->var.yres_virtual;
+
+	if (ch->format->yuv)
+		ch->pitch = info->var.xres;
+	else
+		ch->pitch = info->var.xres * ch->format->bpp / 8;
 
 	ret = sh_mobile_lcdc_start(ch->lcdc);
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(info->dev, "%s: unable to restart LCDC\n", __func__);
-		info->fix.line_length = line_length;
-	}
+
+	info->fix.line_length = ch->pitch;
 
 	if (sh_mobile_format_is_fourcc(&info->var)) {
 		info->fix.type = FB_TYPE_FOURCC;
@@ -1384,8 +1371,8 @@ static int sh_mobile_lcdc_blank(int blank, struct fb_info *info)
 	/* blank the screen? */
 	if (blank > FB_BLANK_UNBLANK && ch->blank_status == FB_BLANK_UNBLANK) {
 		struct fb_fillrect rect = {
-			.width = info->var.xres,
-			.height = info->var.yres,
+			.width = ch->xres,
+			.height = ch->yres,
 		};
 		sh_mobile_lcdc_fillrect(info, &rect);
 	}
@@ -1525,6 +1512,13 @@ sh_mobile_lcdc_channel_fb_init(struct sh_mobile_lcdc_chan *ch,
 	info->fix = sh_mobile_lcdc_fix;
 	info->fix.smem_start = ch->dma_handle;
 	info->fix.smem_len = ch->fb_size;
+	info->fix.line_length = ch->pitch;
+
+	if (ch->format->yuv)
+		info->fix.visual = FB_VISUAL_FOURCC;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
 	if (ch->format->fourcc == V4L2_PIX_FMT_NV12 ||
 	    ch->format->fourcc == V4L2_PIX_FMT_NV21)
 		info->fix.ypanstep = 2;
@@ -1552,14 +1546,6 @@ sh_mobile_lcdc_channel_fb_init(struct sh_mobile_lcdc_chan *ch,
 	if (ret)
 		return ret;
 
-	if (ch->format->yuv) {
-		info->fix.line_length = var->xres;
-		info->fix.visual = FB_VISUAL_FOURCC;
-	} else {
-		info->fix.line_length = var->xres * ch->format->bpp / 8;
-		info->fix.visual = FB_VISUAL_TRUECOLOR;
-	}
-
 	return 0;
 }
 
@@ -1836,8 +1822,6 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		return -EINVAL;
 	}
 
-	ch->format = format;
-
 	/* Iterate through the modes to validate them and find the highest
 	 * resolution.
 	 */
@@ -1875,6 +1859,21 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 		num_modes = cfg->num_modes;
 	}
 
+	/* Use the first mode as default. */
+	ch->format = format;
+	ch->xres = mode->xres;
+	ch->xres_virtual = mode->xres;
+	ch->yres = mode->yres;
+	ch->yres_virtual = mode->yres * 2;
+
+	if (!format->yuv) {
+		ch->colorspace = V4L2_COLORSPACE_SRGB;
+		ch->pitch = ch->xres * format->bpp / 8;
+	} else {
+		ch->colorspace = V4L2_COLORSPACE_REC709;
+		ch->pitch = ch->xres;
+	}
+
 	ch->display.width = cfg->panel_cfg.width;
 	ch->display.height = cfg->panel_cfg.height;
 	ch->display.mode = *mode;
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index cc22b9eaaf0..19a4cd74c89 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -74,9 +74,15 @@ struct sh_mobile_lcdc_chan {
 	struct completion vsync_completion;
 
 	const struct sh_mobile_lcdc_format_info *format;
+	u32 colorspace;
+	unsigned int xres;
+	unsigned int xres_virtual;
+	unsigned int yres;
+	unsigned int yres_virtual;
+	unsigned int pitch;
+
 	unsigned long base_addr_y;
 	unsigned long base_addr_c;
-	unsigned int pitch;
 
 	int (*notify)(struct sh_mobile_lcdc_chan *ch,
 		      enum sh_mobile_lcdc_entity_event event,
-- 
cgit v1.2.3-70-g09d2


From 4976677f4d34df74d7207cae934b27f5d86feace Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 30 Nov 2011 23:07:30 +0100
Subject: fbdev: sh_mobile_lcdc: Pass channel pointer to
 sh_mobile_wait_for_vsync

The sh_mobile_wait_for_vsync() function isn't related to the fbdev API,
make it generic by passing a channel pointer instead of an fb_info
pointer.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 47 ++++++++++++++++++++--------------------
 1 file changed, 23 insertions(+), 24 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 6d377b48c13..adc911f2003 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -585,6 +585,26 @@ static irqreturn_t sh_mobile_lcdc_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int sh_mobile_wait_for_vsync(struct sh_mobile_lcdc_chan *ch)
+{
+	unsigned long ldintr;
+	int ret;
+
+	/* Enable VSync End interrupt and be careful not to acknowledge any
+	 * pending interrupt.
+	 */
+	ldintr = lcdc_read(ch->lcdc, _LDINTR);
+	ldintr |= LDINTR_VEE | LDINTR_STATUS_MASK;
+	lcdc_write(ch->lcdc, _LDINTR, ldintr);
+
+	ret = wait_for_completion_interruptible_timeout(&ch->vsync_completion,
+							msecs_to_jiffies(100));
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
 static void sh_mobile_lcdc_start_stop(struct sh_mobile_lcdc_priv *priv,
 				      int start)
 {
@@ -1083,27 +1103,6 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 	return 0;
 }
 
-static int sh_mobile_wait_for_vsync(struct fb_info *info)
-{
-	struct sh_mobile_lcdc_chan *ch = info->par;
-	unsigned long ldintr;
-	int ret;
-
-	/* Enable VSync End interrupt and be careful not to acknowledge any
-	 * pending interrupt.
-	 */
-	ldintr = lcdc_read(ch->lcdc, _LDINTR);
-	ldintr |= LDINTR_VEE | LDINTR_STATUS_MASK;
-	lcdc_write(ch->lcdc, _LDINTR, ldintr);
-
-	ret = wait_for_completion_interruptible_timeout(&ch->vsync_completion,
-							msecs_to_jiffies(100));
-	if (!ret)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
 static int sh_mobile_ioctl(struct fb_info *info, unsigned int cmd,
 		       unsigned long arg)
 {
@@ -1111,7 +1110,7 @@ static int sh_mobile_ioctl(struct fb_info *info, unsigned int cmd,
 
 	switch (cmd) {
 	case FBIO_WAITFORVSYNC:
-		retval = sh_mobile_wait_for_vsync(info);
+		retval = sh_mobile_wait_for_vsync(info->par);
 		break;
 
 	default:
@@ -1388,8 +1387,8 @@ static int sh_mobile_lcdc_blank(int blank, struct fb_info *info)
 		 * mode will reenable the clocks and update the screen in time,
 		 * so it does not need this. */
 		if (!info->fbdefio) {
-			sh_mobile_wait_for_vsync(info);
-			sh_mobile_wait_for_vsync(info);
+			sh_mobile_wait_for_vsync(ch);
+			sh_mobile_wait_for_vsync(ch);
 		}
 		sh_mobile_lcdc_clk_off(p);
 	}
-- 
cgit v1.2.3-70-g09d2


From e1d1144eb92e69394958e59ff2a0fd22d58094d4 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Request memory regions for memory resources

Make sure the registers and MERAM spaces are reserved before using them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 53 ++++++++++++++++++++++++++++-------------
 1 file changed, 37 insertions(+), 16 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index f45d83ecfd2..dbf5c43852b 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -596,13 +596,12 @@ static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
  * initialize MERAM
  */
 
-static int sh_mobile_meram_remove(struct platform_device *pdev);
-
 static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 {
 	struct sh_mobile_meram_priv *priv;
 	struct sh_mobile_meram_info *pdata = pdev->dev.platform_data;
-	struct resource *res;
+	struct resource *regs;
+	struct resource *meram;
 	int error;
 
 	if (!pdata) {
@@ -610,8 +609,9 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	meram = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (regs == NULL || meram == NULL) {
 		dev_err(&pdev->dev, "cannot get platform resources\n");
 		return -ENOENT;
 	}
@@ -622,32 +622,50 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	platform_set_drvdata(pdev, priv);
-
 	/* initialize private data */
 	mutex_init(&priv->lock);
-	priv->base = ioremap_nocache(res->start, resource_size(res));
+	pdata->ops = &sh_mobile_meram_ops;
+	pdata->priv = priv;
+	pdata->pdev = pdev;
+
+	if (!request_mem_region(regs->start, resource_size(regs), pdev->name)) {
+		dev_err(&pdev->dev, "MERAM registers region already claimed\n");
+		error = -EBUSY;
+		goto err_req_regs;
+	}
+
+	if (!request_mem_region(meram->start, resource_size(meram),
+				pdev->name)) {
+		dev_err(&pdev->dev, "MERAM memory region already claimed\n");
+		error = -EBUSY;
+		goto err_req_meram;
+	}
+
+	priv->base = ioremap_nocache(regs->start, resource_size(regs));
 	if (!priv->base) {
 		dev_err(&pdev->dev, "ioremap failed\n");
 		error = -EFAULT;
-		goto err;
+		goto err_ioremap;
 	}
-	pdata->ops = &sh_mobile_meram_ops;
-	pdata->priv = priv;
-	pdata->pdev = pdev;
 
 	/* initialize ICB addressing mode */
 	if (pdata->addr_mode == SH_MOBILE_MERAM_MODE1)
 		meram_write_reg(priv->base, MEVCR1, MEVCR1_AMD1);
 
+	platform_set_drvdata(pdev, priv);
 	pm_runtime_enable(&pdev->dev);
 
 	dev_info(&pdev->dev, "sh_mobile_meram initialized.");
 
 	return 0;
 
-err:
-	sh_mobile_meram_remove(pdev);
+err_ioremap:
+	release_mem_region(meram->start, resource_size(meram));
+err_req_meram:
+	release_mem_region(regs->start, resource_size(regs));
+err_req_regs:
+	mutex_destroy(&priv->lock);
+	kfree(priv);
 
 	return error;
 }
@@ -656,11 +674,14 @@ err:
 static int sh_mobile_meram_remove(struct platform_device *pdev)
 {
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
+	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *meram = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 
 	pm_runtime_disable(&pdev->dev);
 
-	if (priv->base)
-		iounmap(priv->base);
+	iounmap(priv->base);
+	release_mem_region(meram->start, resource_size(meram));
+	release_mem_region(regs->start, resource_size(regs));
 
 	mutex_destroy(&priv->lock);
 
-- 
cgit v1.2.3-70-g09d2


From d272f428fac77ec57049a3293583ab3353928b1c Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Add _cfg suffix to struct sh_mobile_meram_icb

The structure describe ICB configuration, no ICB objects themselves.
Rename it to sh_mobile_meram_icb_cfg in preparation for the addition of
an ICB structure.

All the structure fields are unsigned integers, make them so.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 10 +++++-----
 include/video/sh_mobile_meram.h | 14 +++++++-------
 2 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index dbf5c43852b..2ad5a454fa2 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -156,7 +156,7 @@ static inline unsigned long meram_read_reg(void __iomem *base, int off)
  */
 
 static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
-				      struct sh_mobile_meram_icb *new)
+				      struct sh_mobile_meram_icb_cfg *new)
 {
 	int i;
 	int used_start, used_end, meram_start, meram_end;
@@ -188,7 +188,7 @@ static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
  */
 
 static inline void meram_mark(struct sh_mobile_meram_priv *priv,
-			      struct sh_mobile_meram_icb *new)
+			      struct sh_mobile_meram_icb_cfg *new)
 {
 	int n;
 
@@ -211,7 +211,7 @@ static inline void meram_mark(struct sh_mobile_meram_priv *priv,
  */
 
 static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
-				struct sh_mobile_meram_icb *icb)
+				struct sh_mobile_meram_icb_cfg *icb)
 {
 	int i;
 	unsigned long pattern;
@@ -303,7 +303,7 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
  */
 
 static int meram_init(struct sh_mobile_meram_priv *priv,
-		      struct sh_mobile_meram_icb *icb,
+		      struct sh_mobile_meram_icb_cfg *icb,
 		      int xres, int yres, int *out_pitch)
 {
 	unsigned long total_byte_count = MERAM_CALC_BYTECOUNT(xres, yres);
@@ -370,7 +370,7 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 }
 
 static void meram_deinit(struct sh_mobile_meram_priv *priv,
-			struct sh_mobile_meram_icb *icb)
+			 struct sh_mobile_meram_icb_cfg *icb)
 {
 	/* disable ICB */
 	meram_write_icb(priv->base, icb->cache_icb,  MExxCTL,
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index af602d602b2..caae558d52a 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -25,17 +25,17 @@ struct sh_mobile_meram_info {
 };
 
 /* icb config */
-struct sh_mobile_meram_icb {
-	int marker_icb;		/* ICB # for Marker ICB */
-	int cache_icb;		/* ICB # for Cache ICB */
-	int meram_offset;	/* MERAM Buffer Offset to use */
-	int meram_size;		/* MERAM Buffer Size to use */
+struct sh_mobile_meram_icb_cfg {
+	unsigned int marker_icb;	/* ICB # for Marker ICB */
+	unsigned int cache_icb;		/* ICB # for Cache ICB */
+	unsigned int meram_offset;	/* MERAM Buffer Offset to use */
+	unsigned int meram_size;	/* MERAM Buffer Size to use */
 
-	int cache_unit;		/* bytes to cache per ICB */
+	unsigned int cache_unit;	/* bytes to cache per ICB */
 };
 
 struct sh_mobile_meram_cfg {
-	struct sh_mobile_meram_icb	icb[2];
+	struct sh_mobile_meram_icb_cfg	icb[2];
 	int				pixelformat;
 	int				current_reg;
 };
-- 
cgit v1.2.3-70-g09d2


From 05432837ae0dfc6c7de93d081b1377ced4eb866b Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Make variables unsigned where applicable

Many variables, such as loop counters, sizes and offsets, should be
unsigned integers. Make them so.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 80 ++++++++++++++++++++++-------------------
 include/video/sh_mobile_meram.h |  6 ++--
 2 files changed, 47 insertions(+), 39 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 2ad5a454fa2..548f7009612 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -104,7 +104,7 @@ struct sh_mobile_meram_priv {
 	void __iomem	*base;
 	struct mutex	lock;
 	unsigned long	used_icb;
-	int		used_meram_cache_regions;
+	unsigned int	used_meram_cache_regions;
 	unsigned long	used_meram_cache[SH_MOBILE_MERAM_ICB_NUM];
 	unsigned long	cmn_saved_regs[CMN_REGS_SIZE];
 	unsigned long	icb_saved_regs[ICB_REGS_SIZE * SH_MOBILE_MERAM_ICB_NUM];
@@ -120,24 +120,25 @@ struct sh_mobile_meram_priv {
 
 #define MERAM_ICB_OFFSET(base, idx, off)	((base) + (off) + (idx) * 0x20)
 
-static inline void meram_write_icb(void __iomem *base, int idx, int off,
-	unsigned long val)
+static inline void meram_write_icb(void __iomem *base, unsigned int idx,
+				   unsigned int off, unsigned long val)
 {
 	iowrite32(val, MERAM_ICB_OFFSET(base, idx, off));
 }
 
-static inline unsigned long meram_read_icb(void __iomem *base, int idx, int off)
+static inline unsigned long meram_read_icb(void __iomem *base, unsigned int idx,
+					   unsigned int off)
 {
 	return ioread32(MERAM_ICB_OFFSET(base, idx, off));
 }
 
-static inline void meram_write_reg(void __iomem *base, int off,
-		unsigned long val)
+static inline void meram_write_reg(void __iomem *base, unsigned int off,
+				   unsigned long val)
 {
 	iowrite32(val, base + off);
 }
 
-static inline unsigned long meram_read_reg(void __iomem *base, int off)
+static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
 {
 	return ioread32(base + off);
 }
@@ -158,8 +159,8 @@ static inline unsigned long meram_read_reg(void __iomem *base, int off)
 static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 				      struct sh_mobile_meram_icb_cfg *new)
 {
-	int i;
-	int used_start, used_end, meram_start, meram_end;
+	unsigned int used_start, used_end, meram_start, meram_end;
+	unsigned int i;
 
 	/* valid ICB? */
 	if (new->marker_icb & ~0x1f || new->cache_icb & ~0x1f)
@@ -190,7 +191,7 @@ static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 static inline void meram_mark(struct sh_mobile_meram_priv *priv,
 			      struct sh_mobile_meram_icb_cfg *new)
 {
-	int n;
+	unsigned int n;
 
 	if (new->marker_icb < 0 || new->cache_icb < 0)
 		return;
@@ -213,8 +214,8 @@ static inline void meram_mark(struct sh_mobile_meram_priv *priv,
 static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
 				struct sh_mobile_meram_icb_cfg *icb)
 {
-	int i;
 	unsigned long pattern;
+	unsigned int i;
 
 	if (icb->marker_icb < 0 || icb->cache_icb < 0)
 		return;
@@ -304,12 +305,15 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 
 static int meram_init(struct sh_mobile_meram_priv *priv,
 		      struct sh_mobile_meram_icb_cfg *icb,
-		      int xres, int yres, int *out_pitch)
+		      unsigned int xres, unsigned int yres,
+		      unsigned int *out_pitch)
 {
 	unsigned long total_byte_count = MERAM_CALC_BYTECOUNT(xres, yres);
 	unsigned long bnm;
-	int lcdc_pitch, xpitch, line_cnt;
-	int save_lines;
+	unsigned int lcdc_pitch;
+	unsigned int xpitch;
+	unsigned int line_cnt;
+	unsigned int save_lines;
 
 	/* adjust pitch to 1024, 2048, 4096 or 8192 */
 	lcdc_pitch = (xres - 1) | 1023;
@@ -386,16 +390,18 @@ static void meram_deinit(struct sh_mobile_meram_priv *priv,
 
 static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 				    struct sh_mobile_meram_cfg *cfg,
-				    int xres, int yres, int pixelformat,
+				    unsigned int xres, unsigned int yres,
+				    unsigned int pixelformat,
 				    unsigned long base_addr_y,
 				    unsigned long base_addr_c,
 				    unsigned long *icb_addr_y,
 				    unsigned long *icb_addr_c,
-				    int *pitch)
+				    unsigned int *pitch)
 {
 	struct platform_device *pdev;
 	struct sh_mobile_meram_priv *priv;
-	int n, out_pitch;
+	unsigned int out_pitch;
+	unsigned int n;
 	int error = 0;
 
 	if (!pdata || !pdata->priv || !pdata->pdev || !cfg)
@@ -538,21 +544,21 @@ static int sh_mobile_meram_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
-	int k, j;
+	unsigned int i, j;
 
-	for (k = 0; k < CMN_REGS_SIZE; k++)
-		priv->cmn_saved_regs[k] = meram_read_reg(priv->base,
-			common_regs[k]);
+	for (i = 0; i < CMN_REGS_SIZE; i++)
+		priv->cmn_saved_regs[i] = meram_read_reg(priv->base,
+			common_regs[i]);
 
-	for (j = 0; j < 32; j++) {
-		if (!test_bit(j, &priv->used_icb))
+	for (i = 0; i < 32; i++) {
+		if (!test_bit(i, &priv->used_icb))
 			continue;
-		for (k = 0; k < ICB_REGS_SIZE; k++) {
-			priv->icb_saved_regs[j * ICB_REGS_SIZE + k] =
-				meram_read_icb(priv->base, j, icb_regs[k]);
+		for (j = 0; j < ICB_REGS_SIZE; j++) {
+			priv->icb_saved_regs[i * ICB_REGS_SIZE + j] =
+				meram_read_icb(priv->base, i, icb_regs[j]);
 			/* Reset ICB on resume */
-			if (icb_regs[k] == MExxCTL)
-				priv->icb_saved_regs[j * ICB_REGS_SIZE + k] |=
+			if (icb_regs[j] == MExxCTL)
+				priv->icb_saved_regs[i * ICB_REGS_SIZE + j] |=
 					MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF;
 		}
 	}
@@ -563,20 +569,20 @@ static int sh_mobile_meram_runtime_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
-	int k, j;
+	unsigned int i, j;
 
-	for (j = 0; j < 32; j++) {
-		if (!test_bit(j, &priv->used_icb))
+	for (i = 0; i < 32; i++) {
+		if (!test_bit(i, &priv->used_icb))
 			continue;
-		for (k = 0; k < ICB_REGS_SIZE; k++) {
-			meram_write_icb(priv->base, j, icb_regs[k],
-			priv->icb_saved_regs[j * ICB_REGS_SIZE + k]);
+		for (j = 0; j < ICB_REGS_SIZE; j++) {
+			meram_write_icb(priv->base, i, icb_regs[j],
+			priv->icb_saved_regs[i * ICB_REGS_SIZE + j]);
 		}
 	}
 
-	for (k = 0; k < CMN_REGS_SIZE; k++)
-		meram_write_reg(priv->base, common_regs[k],
-			priv->cmn_saved_regs[k]);
+	for (i = 0; i < CMN_REGS_SIZE; i++)
+		meram_write_reg(priv->base, common_regs[i],
+				priv->cmn_saved_regs[i]);
 	return 0;
 }
 
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index caae558d52a..6755e3f89a3 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -46,11 +46,13 @@ struct sh_mobile_meram_ops {
 	/* register usage of meram */
 	int (*meram_register)(struct sh_mobile_meram_info *meram_dev,
 			      struct sh_mobile_meram_cfg *cfg,
-			      int xres, int yres, int pixelformat,
+			      unsigned int xres, unsigned int yres,
+			      unsigned int pixelformat,
 			      unsigned long base_addr_y,
 			      unsigned long base_addr_c,
 			      unsigned long *icb_addr_y,
-			      unsigned long *icb_addr_c, int *pitch);
+			      unsigned long *icb_addr_c,
+			      unsigned int *pitch);
 
 	/* unregister usage of meram */
 	int (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
-- 
cgit v1.2.3-70-g09d2


From eb4f2304ba029f78516c2fe23213d7e2d0f8d58f Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Make current_reg field store the current reg
 set

Make sure current_reg == 0/1 always mean register set A/B through all
the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 548f7009612..7af2ffe475d 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -259,8 +259,8 @@ static inline void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
 {
 	unsigned long target;
 
-	target = (cfg->current_reg) ? MExxSARA : MExxSARB;
 	cfg->current_reg ^= 1;
+	target = cfg->current_reg ? MExxSARB : MExxSARA;
 
 	/* set the next address to fetch */
 	meram_write_icb(priv->base, cfg->icb[0].cache_icb,  target,
-- 
cgit v1.2.3-70-g09d2


From 2a618e0333f5d1d27bbd4d90d70f07e0a8dc0ba7 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Add struct sh_mobile_meram_icb

The new structure stores ICB parameters for ICBs.

Instead of modifying the struct sh_mobile_meram_cfg instances passed by
callers, store the ICB parameters internally and make the public API
take const pointers to sh_mobile_meram_cfg.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 178 ++++++++++++++++++++--------------------
 include/video/sh_mobile_meram.h |  12 +--
 2 files changed, 94 insertions(+), 96 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 7af2ffe475d..cddb180f826 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -100,14 +100,38 @@ static unsigned long icb_regs[] = {
 };
 #define ICB_REGS_SIZE ARRAY_SIZE(icb_regs)
 
+/*
+ * sh_mobile_meram_icb - MERAM ICB information
+ * @regs: Registers cache
+ * @region: Start and end addresses of the MERAM region
+ * @cache_unit: Bytes to cache per ICB
+ * @pixelformat: Video pixel format of the data stored in the ICB
+ * @current_reg: Which of Start Address Register A (0) or B (1) is in use
+ */
+struct sh_mobile_meram_icb {
+	unsigned long regs[ICB_REGS_SIZE];
+
+	unsigned long region;
+	unsigned int cache_unit;
+	unsigned int pixelformat;
+	unsigned int current_reg;
+};
+
+/*
+ * sh_mobile_meram_priv - MERAM device
+ * @base: Registers base address
+ * @regs: Registers cache
+ * @lock: Protects used_icb and icbs
+ * @used_icb: Bitmask of used ICBs
+ * @icbs: ICBs
+ */
 struct sh_mobile_meram_priv {
-	void __iomem	*base;
-	struct mutex	lock;
-	unsigned long	used_icb;
-	unsigned int	used_meram_cache_regions;
-	unsigned long	used_meram_cache[SH_MOBILE_MERAM_ICB_NUM];
-	unsigned long	cmn_saved_regs[CMN_REGS_SIZE];
-	unsigned long	icb_saved_regs[ICB_REGS_SIZE * SH_MOBILE_MERAM_ICB_NUM];
+	void __iomem *base;
+	unsigned long regs[CMN_REGS_SIZE];
+
+	struct mutex lock;
+	unsigned long used_icb;
+	struct sh_mobile_meram_icb icbs[SH_MOBILE_MERAM_ICB_NUM];
 };
 
 /* settings */
@@ -157,7 +181,7 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
  */
 
 static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
-				      struct sh_mobile_meram_icb_cfg *new)
+				      const struct sh_mobile_meram_icb_cfg *new)
 {
 	unsigned int used_start, used_end, meram_start, meram_end;
 	unsigned int i;
@@ -167,17 +191,20 @@ static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 		return 1;
 
 	if (test_bit(new->marker_icb, &priv->used_icb) ||
-			test_bit(new->cache_icb,  &priv->used_icb))
+	    test_bit(new->cache_icb,  &priv->used_icb))
 		return  1;
 
-	for (i = 0; i < priv->used_meram_cache_regions; i++) {
-		used_start = MERAM_CACHE_START(priv->used_meram_cache[i]);
-		used_end   = MERAM_CACHE_END(priv->used_meram_cache[i]);
+	for (i = 0; i < SH_MOBILE_MERAM_ICB_NUM; i++) {
+		if (!test_bit(i, &priv->used_icb))
+			continue;
+
+		used_start = MERAM_CACHE_START(priv->icbs[i].region);
+		used_end   = MERAM_CACHE_END(priv->icbs[i].region);
 		meram_start = new->meram_offset;
 		meram_end   = new->meram_offset + new->meram_size;
 
 		if ((meram_start >= used_start && meram_start < used_end) ||
-			(meram_end > used_start && meram_end < used_end))
+		    (meram_end > used_start && meram_end < used_end))
 			return 1;
 	}
 
@@ -189,22 +216,18 @@ static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
  */
 
 static inline void meram_mark(struct sh_mobile_meram_priv *priv,
-			      struct sh_mobile_meram_icb_cfg *new)
+			      const struct sh_mobile_meram_icb_cfg *new,
+			      int pixelformat)
 {
-	unsigned int n;
-
-	if (new->marker_icb < 0 || new->cache_icb < 0)
-		return;
-
 	__set_bit(new->marker_icb, &priv->used_icb);
 	__set_bit(new->cache_icb, &priv->used_icb);
 
-	n = priv->used_meram_cache_regions;
-
-	priv->used_meram_cache[n] = MERAM_CACHE_SET(new->meram_offset,
-						    new->meram_size);
-
-	priv->used_meram_cache_regions++;
+	priv->icbs[new->marker_icb].region = MERAM_CACHE_SET(new->meram_offset,
+							     new->meram_size);
+	priv->icbs[new->cache_icb].region = MERAM_CACHE_SET(new->meram_offset,
+							    new->meram_size);
+	priv->icbs[new->marker_icb].current_reg = 1;
+	priv->icbs[new->marker_icb].pixelformat = pixelformat;
 }
 
 /*
@@ -212,30 +235,10 @@ static inline void meram_mark(struct sh_mobile_meram_priv *priv,
  */
 
 static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
-				struct sh_mobile_meram_icb_cfg *icb)
+				const struct sh_mobile_meram_icb_cfg *icb)
 {
-	unsigned long pattern;
-	unsigned int i;
-
-	if (icb->marker_icb < 0 || icb->cache_icb < 0)
-		return;
-
 	__clear_bit(icb->marker_icb, &priv->used_icb);
 	__clear_bit(icb->cache_icb, &priv->used_icb);
-
-	pattern = MERAM_CACHE_SET(icb->meram_offset, icb->meram_size);
-	for (i = 0; i < priv->used_meram_cache_regions; i++) {
-		if (priv->used_meram_cache[i] == pattern) {
-			while (i < priv->used_meram_cache_regions - 1) {
-				priv->used_meram_cache[i] =
-					priv->used_meram_cache[i + 1] ;
-				i++;
-			}
-			priv->used_meram_cache[i] = 0;
-			priv->used_meram_cache_regions--;
-			break;
-		}
-	}
 }
 
 /*
@@ -244,7 +247,7 @@ static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
 static inline int is_nvcolor(int cspace)
 {
 	if (cspace == SH_MOBILE_MERAM_PF_NV ||
-			cspace == SH_MOBILE_MERAM_PF_NV24)
+	    cspace == SH_MOBILE_MERAM_PF_NV24)
 		return 1;
 	return 0;
 }
@@ -253,46 +256,51 @@ static inline int is_nvcolor(int cspace)
  * set the next address to fetch
  */
 static inline void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
-				       struct sh_mobile_meram_cfg *cfg,
+				       const struct sh_mobile_meram_cfg *cfg,
 				       unsigned long base_addr_y,
 				       unsigned long base_addr_c)
 {
+	struct sh_mobile_meram_icb *icb = &priv->icbs[cfg->icb[0].marker_icb];
 	unsigned long target;
 
-	cfg->current_reg ^= 1;
-	target = cfg->current_reg ? MExxSARB : MExxSARA;
+	icb->current_reg ^= 1;
+	target = icb->current_reg ? MExxSARB : MExxSARA;
 
 	/* set the next address to fetch */
-	meram_write_icb(priv->base, cfg->icb[0].cache_icb,  target,
+	meram_write_icb(priv->base, cfg->icb[0].cache_icb, target,
 			base_addr_y);
 	meram_write_icb(priv->base, cfg->icb[0].marker_icb, target,
-			base_addr_y + cfg->icb[0].cache_unit);
+			base_addr_y +
+			priv->icbs[cfg->icb[0].marker_icb].cache_unit);
 
-	if (is_nvcolor(cfg->pixelformat)) {
+	if (is_nvcolor(icb->pixelformat)) {
 		meram_write_icb(priv->base, cfg->icb[1].cache_icb,  target,
 				base_addr_c);
 		meram_write_icb(priv->base, cfg->icb[1].marker_icb, target,
-				base_addr_c + cfg->icb[1].cache_unit);
+				base_addr_c +
+				priv->icbs[cfg->icb[1].marker_icb].cache_unit);
 	}
 }
 
 /*
  * get the next ICB address
  */
-static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
-					   struct sh_mobile_meram_cfg *cfg,
-					   unsigned long *icb_addr_y,
-					   unsigned long *icb_addr_c)
+static inline void
+meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
+			const struct sh_mobile_meram_cfg *cfg,
+			unsigned long *icb_addr_y, unsigned long *icb_addr_c)
 {
+	struct sh_mobile_meram_priv *priv = pdata->priv;
+	struct sh_mobile_meram_icb *icb = &priv->icbs[cfg->icb[0].marker_icb];
 	unsigned long icb_offset;
 
 	if (pdata->addr_mode == SH_MOBILE_MERAM_MODE0)
-		icb_offset = 0x80000000 | (cfg->current_reg << 29);
+		icb_offset = 0x80000000 | (icb->current_reg << 29);
 	else
-		icb_offset = 0xc0000000 | (cfg->current_reg << 23);
+		icb_offset = 0xc0000000 | (icb->current_reg << 23);
 
 	*icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24);
-	if (is_nvcolor(cfg->pixelformat))
+	if (is_nvcolor(icb->pixelformat))
 		*icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24);
 }
 
@@ -304,7 +312,7 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
  */
 
 static int meram_init(struct sh_mobile_meram_priv *priv,
-		      struct sh_mobile_meram_icb_cfg *icb,
+		      const struct sh_mobile_meram_icb_cfg *icb,
 		      unsigned int xres, unsigned int yres,
 		      unsigned int *out_pitch)
 {
@@ -352,7 +360,8 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 	meram_write_icb(priv->base, icb->marker_icb, MExxSBSIZE, xpitch);
 
 	/* save a cache unit size */
-	icb->cache_unit = xres * save_lines;
+	priv->icbs[icb->cache_icb].cache_unit = xres * save_lines;
+	priv->icbs[icb->marker_icb].cache_unit = xres * save_lines;
 
 	/*
 	 * Set MERAM for framebuffer
@@ -374,14 +383,16 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 }
 
 static void meram_deinit(struct sh_mobile_meram_priv *priv,
-			 struct sh_mobile_meram_icb_cfg *icb)
+			 const struct sh_mobile_meram_icb_cfg *icb)
 {
 	/* disable ICB */
 	meram_write_icb(priv->base, icb->cache_icb,  MExxCTL,
 			MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
 	meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
 			MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
-	icb->cache_unit = 0;
+
+	priv->icbs[icb->cache_icb].cache_unit = 0;
+	priv->icbs[icb->marker_icb].cache_unit = 0;
 }
 
 /*
@@ -389,7 +400,7 @@ static void meram_deinit(struct sh_mobile_meram_priv *priv,
  */
 
 static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
-				    struct sh_mobile_meram_cfg *cfg,
+				    const struct sh_mobile_meram_cfg *cfg,
 				    unsigned int xres, unsigned int yres,
 				    unsigned int pixelformat,
 				    unsigned long base_addr_y,
@@ -433,12 +444,6 @@ static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 
 	mutex_lock(&priv->lock);
 
-	if (priv->used_meram_cache_regions + 2 > SH_MOBILE_MERAM_ICB_NUM) {
-		dev_err(&pdev->dev, "no more ICB available.");
-		error = -EINVAL;
-		goto err;
-	}
-
 	/* make sure that there's no overlaps */
 	if (meram_check_overlap(priv, &cfg->icb[0])) {
 		dev_err(&pdev->dev, "conflicting config detected.");
@@ -464,10 +469,9 @@ static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 	}
 
 	/* we now register the ICB */
-	cfg->pixelformat = pixelformat;
-	meram_mark(priv, &cfg->icb[0]);
+	meram_mark(priv, &cfg->icb[0], pixelformat);
 	if (is_nvcolor(pixelformat))
-		meram_mark(priv, &cfg->icb[1]);
+		meram_mark(priv, &cfg->icb[1], pixelformat);
 
 	/* initialize MERAM */
 	meram_init(priv, &cfg->icb[0], xres, yres, &out_pitch);
@@ -479,7 +483,6 @@ static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 		meram_init(priv, &cfg->icb[1], 2 * xres, (yres + 1) / 2,
 			&out_pitch);
 
-	cfg->current_reg = 1;
 	meram_set_next_addr(priv, cfg, base_addr_y, base_addr_c);
 	meram_get_next_icb_addr(pdata, cfg, icb_addr_y, icb_addr_c);
 
@@ -492,19 +495,21 @@ err:
 }
 
 static int sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata,
-				      struct sh_mobile_meram_cfg *cfg)
+				      const struct sh_mobile_meram_cfg *cfg)
 {
 	struct sh_mobile_meram_priv *priv;
+	struct sh_mobile_meram_icb *icb;
 
 	if (!pdata || !pdata->priv || !cfg)
 		return -EINVAL;
 
 	priv = pdata->priv;
+	icb = &priv->icbs[cfg->icb[0].marker_icb];
 
 	mutex_lock(&priv->lock);
 
 	/* deinit & unmark */
-	if (is_nvcolor(cfg->pixelformat)) {
+	if (is_nvcolor(icb->pixelformat)) {
 		meram_deinit(priv, &cfg->icb[1]);
 		meram_unmark(priv, &cfg->icb[1]);
 	}
@@ -517,7 +522,7 @@ static int sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata,
 }
 
 static int sh_mobile_meram_update(struct sh_mobile_meram_info *pdata,
-				  struct sh_mobile_meram_cfg *cfg,
+				  const struct sh_mobile_meram_cfg *cfg,
 				  unsigned long base_addr_y,
 				  unsigned long base_addr_c,
 				  unsigned long *icb_addr_y,
@@ -547,18 +552,17 @@ static int sh_mobile_meram_runtime_suspend(struct device *dev)
 	unsigned int i, j;
 
 	for (i = 0; i < CMN_REGS_SIZE; i++)
-		priv->cmn_saved_regs[i] = meram_read_reg(priv->base,
-			common_regs[i]);
+		priv->regs[i] = meram_read_reg(priv->base, common_regs[i]);
 
 	for (i = 0; i < 32; i++) {
 		if (!test_bit(i, &priv->used_icb))
 			continue;
 		for (j = 0; j < ICB_REGS_SIZE; j++) {
-			priv->icb_saved_regs[i * ICB_REGS_SIZE + j] =
+			priv->icbs[i].regs[j] =
 				meram_read_icb(priv->base, i, icb_regs[j]);
 			/* Reset ICB on resume */
 			if (icb_regs[j] == MExxCTL)
-				priv->icb_saved_regs[i * ICB_REGS_SIZE + j] |=
+				priv->icbs[i].regs[j] |=
 					MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF;
 		}
 	}
@@ -574,15 +578,13 @@ static int sh_mobile_meram_runtime_resume(struct device *dev)
 	for (i = 0; i < 32; i++) {
 		if (!test_bit(i, &priv->used_icb))
 			continue;
-		for (j = 0; j < ICB_REGS_SIZE; j++) {
+		for (j = 0; j < ICB_REGS_SIZE; j++)
 			meram_write_icb(priv->base, i, icb_regs[j],
-			priv->icb_saved_regs[i * ICB_REGS_SIZE + j]);
-		}
+					priv->icbs[i].regs[j]);
 	}
 
 	for (i = 0; i < CMN_REGS_SIZE; i++)
-		meram_write_reg(priv->base, common_regs[i],
-				priv->cmn_saved_regs[i]);
+		meram_write_reg(priv->base, common_regs[i], priv->regs[i]);
 	return 0;
 }
 
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index 6755e3f89a3..05ca3f92de1 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -30,14 +30,10 @@ struct sh_mobile_meram_icb_cfg {
 	unsigned int cache_icb;		/* ICB # for Cache ICB */
 	unsigned int meram_offset;	/* MERAM Buffer Offset to use */
 	unsigned int meram_size;	/* MERAM Buffer Size to use */
-
-	unsigned int cache_unit;	/* bytes to cache per ICB */
 };
 
 struct sh_mobile_meram_cfg {
-	struct sh_mobile_meram_icb_cfg	icb[2];
-	int				pixelformat;
-	int				current_reg;
+	struct sh_mobile_meram_icb_cfg icb[2];
 };
 
 struct module;
@@ -45,7 +41,7 @@ struct sh_mobile_meram_ops {
 	struct module	*module;
 	/* register usage of meram */
 	int (*meram_register)(struct sh_mobile_meram_info *meram_dev,
-			      struct sh_mobile_meram_cfg *cfg,
+			      const struct sh_mobile_meram_cfg *cfg,
 			      unsigned int xres, unsigned int yres,
 			      unsigned int pixelformat,
 			      unsigned long base_addr_y,
@@ -56,11 +52,11 @@ struct sh_mobile_meram_ops {
 
 	/* unregister usage of meram */
 	int (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
-				struct sh_mobile_meram_cfg *cfg);
+				const struct sh_mobile_meram_cfg *cfg);
 
 	/* update meram settings */
 	int (*meram_update)(struct sh_mobile_meram_info *meram_dev,
-			    struct sh_mobile_meram_cfg *cfg,
+			    const struct sh_mobile_meram_cfg *cfg,
 			    unsigned long base_addr_y,
 			    unsigned long base_addr_c,
 			    unsigned long *icb_addr_y,
-- 
cgit v1.2.3-70-g09d2


From 762f7cc94bc5c5c8c54f9d0073a07a275b106d89 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Don't inline everything

Let the compiler decide which complex functions to inline, and constify
constant static arrays.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index cddb180f826..0c5b301697e 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -83,14 +83,14 @@
 
 #define SH_MOBILE_MERAM_ICB_NUM		32
 
-static unsigned long common_regs[] = {
+static const unsigned long common_regs[] = {
 	MEVCR1,
 	MEQSEL1,
 	MEQSEL2,
 };
 #define CMN_REGS_SIZE ARRAY_SIZE(common_regs)
 
-static unsigned long icb_regs[] = {
+static const unsigned long icb_regs[] = {
 	MExxCTL,
 	MExxBSIZE,
 	MExxMNCF,
@@ -180,8 +180,8 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
  * check if there's no overlaps in MERAM allocation.
  */
 
-static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
-				      const struct sh_mobile_meram_icb_cfg *new)
+static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
+			       const struct sh_mobile_meram_icb_cfg *new)
 {
 	unsigned int used_start, used_end, meram_start, meram_end;
 	unsigned int i;
@@ -215,9 +215,9 @@ static inline int meram_check_overlap(struct sh_mobile_meram_priv *priv,
  * mark the specified ICB as used
  */
 
-static inline void meram_mark(struct sh_mobile_meram_priv *priv,
-			      const struct sh_mobile_meram_icb_cfg *new,
-			      int pixelformat)
+static void meram_mark(struct sh_mobile_meram_priv *priv,
+		       const struct sh_mobile_meram_icb_cfg *new,
+		       int pixelformat)
 {
 	__set_bit(new->marker_icb, &priv->used_icb);
 	__set_bit(new->cache_icb, &priv->used_icb);
@@ -234,8 +234,8 @@ static inline void meram_mark(struct sh_mobile_meram_priv *priv,
  * unmark the specified ICB as used
  */
 
-static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
-				const struct sh_mobile_meram_icb_cfg *icb)
+static void meram_unmark(struct sh_mobile_meram_priv *priv,
+			 const struct sh_mobile_meram_icb_cfg *icb)
 {
 	__clear_bit(icb->marker_icb, &priv->used_icb);
 	__clear_bit(icb->cache_icb, &priv->used_icb);
@@ -244,7 +244,7 @@ static inline void meram_unmark(struct sh_mobile_meram_priv *priv,
 /*
  * is this a YCbCr(NV12, NV16 or NV24) colorspace
  */
-static inline int is_nvcolor(int cspace)
+static int is_nvcolor(int cspace)
 {
 	if (cspace == SH_MOBILE_MERAM_PF_NV ||
 	    cspace == SH_MOBILE_MERAM_PF_NV24)
@@ -255,10 +255,10 @@ static inline int is_nvcolor(int cspace)
 /*
  * set the next address to fetch
  */
-static inline void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
-				       const struct sh_mobile_meram_cfg *cfg,
-				       unsigned long base_addr_y,
-				       unsigned long base_addr_c)
+static void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
+				const struct sh_mobile_meram_cfg *cfg,
+				unsigned long base_addr_y,
+				unsigned long base_addr_c)
 {
 	struct sh_mobile_meram_icb *icb = &priv->icbs[cfg->icb[0].marker_icb];
 	unsigned long target;
@@ -285,7 +285,7 @@ static inline void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
 /*
  * get the next ICB address
  */
-static inline void
+static void
 meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 			const struct sh_mobile_meram_cfg *cfg,
 			unsigned long *icb_addr_y, unsigned long *icb_addr_c)
-- 
cgit v1.2.3-70-g09d2


From 7554340c7acae4a719b1b70b0defa3c67149610b Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Divide the code into sections

And rename a couple of constants to make prefixes more uniform.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 98 ++++++++++++++++++-----------------------
 1 file changed, 44 insertions(+), 54 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 0c5b301697e..30a3305ba36 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -9,16 +9,20 @@
  * for more details.
  */
 
+#include <linux/device.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/platform_device.h>
+
 #include <video/sh_mobile_meram.h>
 
-/* meram registers */
+/* -----------------------------------------------------------------------------
+ * MERAM registers
+ */
+
 #define MEVCR1			0x4
 #define MEVCR1_RST		(1 << 31)
 #define MEVCR1_WD		(1 << 30)
@@ -81,14 +85,12 @@
 	 ((yszm1) << MExxBSIZE_YSZM1_SHIFT) | \
 	 ((xszm1) << MExxBSIZE_XSZM1_SHIFT))
 
-#define SH_MOBILE_MERAM_ICB_NUM		32
-
 static const unsigned long common_regs[] = {
 	MEVCR1,
 	MEQSEL1,
 	MEQSEL2,
 };
-#define CMN_REGS_SIZE ARRAY_SIZE(common_regs)
+#define MERAM_REGS_SIZE ARRAY_SIZE(common_regs)
 
 static const unsigned long icb_regs[] = {
 	MExxCTL,
@@ -117,6 +119,8 @@ struct sh_mobile_meram_icb {
 	unsigned int current_reg;
 };
 
+#define MERAM_ICB_NUM			32
+
 /*
  * sh_mobile_meram_priv - MERAM device
  * @base: Registers base address
@@ -127,19 +131,19 @@ struct sh_mobile_meram_icb {
  */
 struct sh_mobile_meram_priv {
 	void __iomem *base;
-	unsigned long regs[CMN_REGS_SIZE];
+	unsigned long regs[MERAM_REGS_SIZE];
 
 	struct mutex lock;
 	unsigned long used_icb;
-	struct sh_mobile_meram_icb icbs[SH_MOBILE_MERAM_ICB_NUM];
+	struct sh_mobile_meram_icb icbs[MERAM_ICB_NUM];
 };
 
 /* settings */
-#define MERAM_SEC_LINE 15
-#define MERAM_LINE_WIDTH 2048
+#define MERAM_SEC_LINE			15
+#define MERAM_LINE_WIDTH		2048
 
-/*
- * MERAM/ICB access functions
+/* -----------------------------------------------------------------------------
+ * Registers access
  */
 
 #define MERAM_ICB_OFFSET(base, idx, off)	((base) + (off) + (idx) * 0x20)
@@ -167,8 +171,8 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
 	return ioread32(base + off);
 }
 
-/*
- * register ICB
+/* -----------------------------------------------------------------------------
+ * Allocation
  */
 
 #define MERAM_CACHE_START(p)	 ((p) >> 16)
@@ -176,10 +180,7 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
 #define MERAM_CACHE_SET(o, s)	 ((((o) & 0xffff) << 16) | \
 				  (((o) + (s) - 1) & 0xffff))
 
-/*
- * check if there's no overlaps in MERAM allocation.
- */
-
+/* Check if there's no overlaps in MERAM allocation. */
 static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 			       const struct sh_mobile_meram_icb_cfg *new)
 {
@@ -194,7 +195,7 @@ static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 	    test_bit(new->cache_icb,  &priv->used_icb))
 		return  1;
 
-	for (i = 0; i < SH_MOBILE_MERAM_ICB_NUM; i++) {
+	for (i = 0; i < MERAM_ICB_NUM; i++) {
 		if (!test_bit(i, &priv->used_icb))
 			continue;
 
@@ -211,10 +212,7 @@ static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 	return 0;
 }
 
-/*
- * mark the specified ICB as used
- */
-
+/* Mark the specified ICB as used. */
 static void meram_mark(struct sh_mobile_meram_priv *priv,
 		       const struct sh_mobile_meram_icb_cfg *new,
 		       int pixelformat)
@@ -230,10 +228,7 @@ static void meram_mark(struct sh_mobile_meram_priv *priv,
 	priv->icbs[new->marker_icb].pixelformat = pixelformat;
 }
 
-/*
- * unmark the specified ICB as used
- */
-
+/* Unmark the specified ICB as used. */
 static void meram_unmark(struct sh_mobile_meram_priv *priv,
 			 const struct sh_mobile_meram_icb_cfg *icb)
 {
@@ -241,9 +236,7 @@ static void meram_unmark(struct sh_mobile_meram_priv *priv,
 	__clear_bit(icb->cache_icb, &priv->used_icb);
 }
 
-/*
- * is this a YCbCr(NV12, NV16 or NV24) colorspace
- */
+/* Is this a YCbCr(NV12, NV16 or NV24) colorspace? */
 static int is_nvcolor(int cspace)
 {
 	if (cspace == SH_MOBILE_MERAM_PF_NV ||
@@ -252,9 +245,7 @@ static int is_nvcolor(int cspace)
 	return 0;
 }
 
-/*
- * set the next address to fetch
- */
+/* Set the next address to fetch. */
 static void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
 				const struct sh_mobile_meram_cfg *cfg,
 				unsigned long base_addr_y,
@@ -282,9 +273,7 @@ static void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
 	}
 }
 
-/*
- * get the next ICB address
- */
+/* Get the next ICB address. */
 static void
 meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 			const struct sh_mobile_meram_cfg *cfg,
@@ -307,10 +296,7 @@ meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 #define MERAM_CALC_BYTECOUNT(x, y) \
 	(((x) * (y) + (MERAM_LINE_WIDTH - 1)) & ~(MERAM_LINE_WIDTH - 1))
 
-/*
- * initialize MERAM
- */
-
+/* Initialize MERAM. */
 static int meram_init(struct sh_mobile_meram_priv *priv,
 		      const struct sh_mobile_meram_icb_cfg *icb,
 		      unsigned int xres, unsigned int yres,
@@ -395,8 +381,8 @@ static void meram_deinit(struct sh_mobile_meram_priv *priv,
 	priv->icbs[icb->marker_icb].cache_unit = 0;
 }
 
-/*
- * register the ICB
+/* -----------------------------------------------------------------------------
+ * Registration/unregistration
  */
 
 static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
@@ -545,13 +531,24 @@ static int sh_mobile_meram_update(struct sh_mobile_meram_info *pdata,
 	return 0;
 }
 
+static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
+	.module			= THIS_MODULE,
+	.meram_register		= sh_mobile_meram_register,
+	.meram_unregister	= sh_mobile_meram_unregister,
+	.meram_update		= sh_mobile_meram_update,
+};
+
+/* -----------------------------------------------------------------------------
+ * Power management
+ */
+
 static int sh_mobile_meram_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
 	unsigned int i, j;
 
-	for (i = 0; i < CMN_REGS_SIZE; i++)
+	for (i = 0; i < MERAM_REGS_SIZE; i++)
 		priv->regs[i] = meram_read_reg(priv->base, common_regs[i]);
 
 	for (i = 0; i < 32; i++) {
@@ -583,7 +580,7 @@ static int sh_mobile_meram_runtime_resume(struct device *dev)
 					priv->icbs[i].regs[j]);
 	}
 
-	for (i = 0; i < CMN_REGS_SIZE; i++)
+	for (i = 0; i < MERAM_REGS_SIZE; i++)
 		meram_write_reg(priv->base, common_regs[i], priv->regs[i]);
 	return 0;
 }
@@ -593,15 +590,8 @@ static const struct dev_pm_ops sh_mobile_meram_dev_pm_ops = {
 	.runtime_resume = sh_mobile_meram_runtime_resume,
 };
 
-static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
-	.module			= THIS_MODULE,
-	.meram_register		= sh_mobile_meram_register,
-	.meram_unregister	= sh_mobile_meram_unregister,
-	.meram_update		= sh_mobile_meram_update,
-};
-
-/*
- * initialize MERAM
+/* -----------------------------------------------------------------------------
+ * Probe/remove and driver init/exit
  */
 
 static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
-- 
cgit v1.2.3-70-g09d2


From 974d250be2c70c7bf899275b23b241685d4ed7f8 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 19 Sep 2011 11:40:31 +0200
Subject: fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocation

Instead of requiring the users to hardcode MERAM allocation in platform
data, allocate blocks at runtime using genalloc.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-ap4evb.c   |   4 --
 arch/arm/mach-shmobile/board-mackerel.c |   4 --
 drivers/video/Kconfig                   |   1 +
 drivers/video/sh_mobile_meram.c         | 112 ++++++++++++++++++++------------
 include/video/sh_mobile_meram.h         |   1 -
 5 files changed, 71 insertions(+), 51 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 63498fbdfd1..7b902277f14 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -583,13 +583,11 @@ static struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.marker_icb     = 28,
 		.cache_icb      = 24,
-		.meram_offset   = 0x0,
 		.meram_size     = 0x40,
 	},
 	.icb[1] = {
 		.marker_icb     = 29,
 		.cache_icb      = 25,
-		.meram_offset   = 0x40,
 		.meram_size     = 0x40,
 	},
 };
@@ -866,13 +864,11 @@ static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
 	.icb[0] = {
 		.marker_icb     = 30,
 		.cache_icb      = 26,
-		.meram_offset   = 0x80,
 		.meram_size     = 0x100,
 	},
 	.icb[1] = {
 		.marker_icb     = 31,
 		.cache_icb      = 27,
-		.meram_offset   = 0x180,
 		.meram_size     = 0x100,
 	},
 };
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 17ba6bccf97..0c0fd4f0c30 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -373,13 +373,11 @@ static struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.marker_icb     = 28,
 		.cache_icb      = 24,
-		.meram_offset   = 0x0,
 		.meram_size     = 0x40,
 	},
 	.icb[1] = {
 		.marker_icb     = 29,
 		.cache_icb      = 25,
-		.meram_offset   = 0x40,
 		.meram_size     = 0x40,
 	},
 };
@@ -465,13 +463,11 @@ static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
 	.icb[0] = {
 		.marker_icb     = 30,
 		.cache_icb      = 26,
-		.meram_offset   = 0x80,
 		.meram_size     = 0x100,
 	},
 	.icb[1] = {
 		.marker_icb     = 31,
 		.cache_icb      = 27,
-		.meram_offset   = 0x180,
 		.meram_size     = 0x100,
 	},
 };
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8951cbd2d2f..a4359424318 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2016,6 +2016,7 @@ config FB_SH_MOBILE_HDMI
 config FB_SH_MOBILE_MERAM
 	tristate "SuperH Mobile MERAM read ahead support for LCDC"
 	depends on FB_SH_MOBILE_LCDC
+	select GENERIC_ALLOCATOR
 	default y
 	---help---
 	  Enable MERAM support for the SH-Mobile LCD controller.
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 30a3305ba36..92dc9bd5b66 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/genalloc.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -105,15 +106,17 @@ static const unsigned long icb_regs[] = {
 /*
  * sh_mobile_meram_icb - MERAM ICB information
  * @regs: Registers cache
- * @region: Start and end addresses of the MERAM region
+ * @offset: MERAM block offset
+ * @size: MERAM block size in bytes
  * @cache_unit: Bytes to cache per ICB
  * @pixelformat: Video pixel format of the data stored in the ICB
  * @current_reg: Which of Start Address Register A (0) or B (1) is in use
  */
 struct sh_mobile_meram_icb {
 	unsigned long regs[ICB_REGS_SIZE];
+	unsigned long offset;
+	unsigned int size;
 
-	unsigned long region;
 	unsigned int cache_unit;
 	unsigned int pixelformat;
 	unsigned int current_reg;
@@ -124,21 +127,27 @@ struct sh_mobile_meram_icb {
 /*
  * sh_mobile_meram_priv - MERAM device
  * @base: Registers base address
+ * @meram: MERAM physical address
  * @regs: Registers cache
  * @lock: Protects used_icb and icbs
  * @used_icb: Bitmask of used ICBs
  * @icbs: ICBs
+ * @pool: Allocation pool to manage the MERAM
  */
 struct sh_mobile_meram_priv {
 	void __iomem *base;
+	unsigned long meram;
 	unsigned long regs[MERAM_REGS_SIZE];
 
 	struct mutex lock;
 	unsigned long used_icb;
 	struct sh_mobile_meram_icb icbs[MERAM_ICB_NUM];
+
+	struct gen_pool *pool;
 };
 
 /* settings */
+#define MERAM_GRANULARITY		1024
 #define MERAM_SEC_LINE			15
 #define MERAM_LINE_WIDTH		2048
 
@@ -175,18 +184,10 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
  * Allocation
  */
 
-#define MERAM_CACHE_START(p)	 ((p) >> 16)
-#define MERAM_CACHE_END(p)	 ((p) & 0xffff)
-#define MERAM_CACHE_SET(o, s)	 ((((o) & 0xffff) << 16) | \
-				  (((o) + (s) - 1) & 0xffff))
-
 /* Check if there's no overlaps in MERAM allocation. */
 static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 			       const struct sh_mobile_meram_icb_cfg *new)
 {
-	unsigned int used_start, used_end, meram_start, meram_end;
-	unsigned int i;
-
 	/* valid ICB? */
 	if (new->marker_icb & ~0x1f || new->cache_icb & ~0x1f)
 		return 1;
@@ -195,43 +196,40 @@ static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
 	    test_bit(new->cache_icb,  &priv->used_icb))
 		return  1;
 
-	for (i = 0; i < MERAM_ICB_NUM; i++) {
-		if (!test_bit(i, &priv->used_icb))
-			continue;
-
-		used_start = MERAM_CACHE_START(priv->icbs[i].region);
-		used_end   = MERAM_CACHE_END(priv->icbs[i].region);
-		meram_start = new->meram_offset;
-		meram_end   = new->meram_offset + new->meram_size;
-
-		if ((meram_start >= used_start && meram_start < used_end) ||
-		    (meram_end > used_start && meram_end < used_end))
-			return 1;
-	}
-
 	return 0;
 }
 
-/* Mark the specified ICB as used. */
-static void meram_mark(struct sh_mobile_meram_priv *priv,
+/* Allocate memory for the ICBs and mark them as used. */
+static int meram_alloc(struct sh_mobile_meram_priv *priv,
 		       const struct sh_mobile_meram_icb_cfg *new,
 		       int pixelformat)
 {
+	struct sh_mobile_meram_icb *marker = &priv->icbs[new->marker_icb];
+	unsigned long mem;
+
+	mem = gen_pool_alloc(priv->pool, new->meram_size * 1024);
+	if (mem == 0)
+		return -ENOMEM;
+
 	__set_bit(new->marker_icb, &priv->used_icb);
 	__set_bit(new->cache_icb, &priv->used_icb);
 
-	priv->icbs[new->marker_icb].region = MERAM_CACHE_SET(new->meram_offset,
-							     new->meram_size);
-	priv->icbs[new->cache_icb].region = MERAM_CACHE_SET(new->meram_offset,
-							    new->meram_size);
-	priv->icbs[new->marker_icb].current_reg = 1;
-	priv->icbs[new->marker_icb].pixelformat = pixelformat;
+	marker->offset = mem - priv->meram;
+	marker->size = new->meram_size * 1024;
+	marker->current_reg = 1;
+	marker->pixelformat = pixelformat;
+
+	return 0;
 }
 
 /* Unmark the specified ICB as used. */
-static void meram_unmark(struct sh_mobile_meram_priv *priv,
-			 const struct sh_mobile_meram_icb_cfg *icb)
+static void meram_free(struct sh_mobile_meram_priv *priv,
+		       const struct sh_mobile_meram_icb_cfg *icb)
 {
+	struct sh_mobile_meram_icb *marker = &priv->icbs[icb->marker_icb];
+
+	gen_pool_free(priv->pool, priv->meram + marker->offset, marker->size);
+
 	__clear_bit(icb->marker_icb, &priv->used_icb);
 	__clear_bit(icb->cache_icb, &priv->used_icb);
 }
@@ -302,6 +300,7 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 		      unsigned int xres, unsigned int yres,
 		      unsigned int *out_pitch)
 {
+	struct sh_mobile_meram_icb *marker = &priv->icbs[icb->marker_icb];
 	unsigned long total_byte_count = MERAM_CALC_BYTECOUNT(xres, yres);
 	unsigned long bnm;
 	unsigned int lcdc_pitch;
@@ -356,11 +355,11 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 	 * we also split the allocated MERAM buffer between two ICBs.
 	 */
 	meram_write_icb(priv->base, icb->cache_icb, MExxCTL,
-			MERAM_MExxCTL_VAL(icb->marker_icb, icb->meram_offset) |
+			MERAM_MExxCTL_VAL(icb->marker_icb, marker->offset) |
 			MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
 			MExxCTL_MD_FB);
 	meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
-			MERAM_MExxCTL_VAL(icb->cache_icb, icb->meram_offset +
+			MERAM_MExxCTL_VAL(icb->cache_icb, marker->offset +
 					  icb->meram_size / 2) |
 			MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
 			MExxCTL_MD_FB);
@@ -454,10 +453,18 @@ static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 		goto err;
 	}
 
-	/* we now register the ICB */
-	meram_mark(priv, &cfg->icb[0], pixelformat);
-	if (is_nvcolor(pixelformat))
-		meram_mark(priv, &cfg->icb[1], pixelformat);
+	/* We now register the ICBs and allocate the MERAM regions. */
+	error = meram_alloc(priv, &cfg->icb[0], pixelformat);
+	if (error < 0)
+		goto err;
+
+	if (is_nvcolor(pixelformat)) {
+		error = meram_alloc(priv, &cfg->icb[1], pixelformat);
+		if (error < 0) {
+			meram_free(priv, &cfg->icb[0]);
+			goto err;
+		}
+	}
 
 	/* initialize MERAM */
 	meram_init(priv, &cfg->icb[0], xres, yres, &out_pitch);
@@ -497,10 +504,10 @@ static int sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata,
 	/* deinit & unmark */
 	if (is_nvcolor(icb->pixelformat)) {
 		meram_deinit(priv, &cfg->icb[1]);
-		meram_unmark(priv, &cfg->icb[1]);
+		meram_free(priv, &cfg->icb[1]);
 	}
 	meram_deinit(priv, &cfg->icb[0]);
-	meram_unmark(priv, &cfg->icb[0]);
+	meram_free(priv, &cfg->icb[0]);
 
 	mutex_unlock(&priv->lock);
 
@@ -626,6 +633,7 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 	pdata->priv = priv;
 	pdata->pdev = pdev;
 
+	/* Request memory regions and remap the registers. */
 	if (!request_mem_region(regs->start, resource_size(regs), pdev->name)) {
 		dev_err(&pdev->dev, "MERAM registers region already claimed\n");
 		error = -EBUSY;
@@ -646,6 +654,20 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
+	priv->meram = meram->start;
+
+	/* Create and initialize the MERAM memory pool. */
+	priv->pool = gen_pool_create(ilog2(MERAM_GRANULARITY), -1);
+	if (priv->pool == NULL) {
+		error = -ENOMEM;
+		goto err_genpool;
+	}
+
+	error = gen_pool_add(priv->pool, meram->start, resource_size(meram),
+			     -1);
+	if (error < 0)
+		goto err_genpool;
+
 	/* initialize ICB addressing mode */
 	if (pdata->addr_mode == SH_MOBILE_MERAM_MODE1)
 		meram_write_reg(priv->base, MEVCR1, MEVCR1_AMD1);
@@ -657,6 +679,10 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_genpool:
+	if (priv->pool)
+		gen_pool_destroy(priv->pool);
+	iounmap(priv->base);
 err_ioremap:
 	release_mem_region(meram->start, resource_size(meram));
 err_req_meram:
@@ -677,6 +703,8 @@ static int sh_mobile_meram_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
+	gen_pool_destroy(priv->pool);
+
 	iounmap(priv->base);
 	release_mem_region(meram->start, resource_size(meram));
 	release_mem_region(regs->start, resource_size(regs));
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index 05ca3f92de1..f7700fcb054 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -28,7 +28,6 @@ struct sh_mobile_meram_info {
 struct sh_mobile_meram_icb_cfg {
 	unsigned int marker_icb;	/* ICB # for Marker ICB */
 	unsigned int cache_icb;		/* ICB # for Cache ICB */
-	unsigned int meram_offset;	/* MERAM Buffer Offset to use */
 	unsigned int meram_size;	/* MERAM Buffer Size to use */
 };
 
-- 
cgit v1.2.3-70-g09d2


From 481100506b34d666243832c3f2aee905c03cb8e7 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 12 Dec 2011 16:36:13 +0100
Subject: fbdev: sh_mobile_meram: Allocate ICBs automatically

Instead of manually specifying the ICBs to use in platform data,
allocate them automatically at runtime. The range of reserved ICBs (for
instance to be used through UIO), if any, is passed in the platform data
reserved_icbs field as a bitmask.

The MERAM registration function now returns a pointer to an opaque MERAM
object, which is passed to the update and unregistration functions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c |  27 ++-
 drivers/video/sh_mobile_lcdcfb.h |   2 +-
 drivers/video/sh_mobile_meram.c  | 345 +++++++++++++++++++++------------------
 include/video/sh_mobile_meram.h  |  27 +--
 4 files changed, 215 insertions(+), 186 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index adc911f2003..d0c90269922 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -840,6 +840,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
 		struct sh_mobile_meram_cfg *cfg;
 		int pixelformat;
+		void *meram;
 
 		ch = &priv->ch[k];
 		if (!ch->enabled)
@@ -856,9 +857,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* we need to de-init configured ICBs before we can
 		 * re-initialize them.
 		 */
-		if (ch->meram_enabled) {
-			mdev->ops->meram_unregister(mdev, cfg);
-			ch->meram_enabled = 0;
+		if (ch->meram) {
+			mdev->ops->meram_unregister(mdev, ch->meram);
+			ch->meram = NULL;
 		}
 
 		switch (ch->format->fourcc) {
@@ -880,13 +881,13 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			break;
 		}
 
-		ret = mdev->ops->meram_register(mdev, cfg, ch->pitch,
+		meram = mdev->ops->meram_register(mdev, cfg, ch->pitch,
 					ch->yres, pixelformat,
 					ch->base_addr_y, ch->base_addr_c,
 					&ch->base_addr_y, &ch->base_addr_c,
 					&ch->pitch);
-		if (!ret)
-			ch->meram_enabled = 1;
+		if (!IS_ERR(meram))
+			ch->meram = meram;
 	}
 
 	/* Start the LCDC. */
@@ -951,13 +952,11 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
 		sh_mobile_lcdc_display_off(ch);
 
 		/* disable the meram */
-		if (ch->meram_enabled) {
-			struct sh_mobile_meram_cfg *cfg;
+		if (ch->meram) {
 			struct sh_mobile_meram_info *mdev;
-			cfg = ch->cfg.meram_cfg;
 			mdev = priv->meram_dev;
-			mdev->ops->meram_unregister(mdev, cfg);
-			ch->meram_enabled = 0;
+			mdev->ops->meram_unregister(mdev, ch->meram);
+			ch->meram = 0;
 		}
 
 	}
@@ -1070,14 +1069,12 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 			base_addr_c += var->xoffset;
 	}
 
-	if (ch->meram_enabled) {
-		struct sh_mobile_meram_cfg *cfg;
+	if (ch->meram) {
 		struct sh_mobile_meram_info *mdev;
 		int ret;
 
-		cfg = ch->cfg.meram_cfg;
 		mdev = priv->meram_dev;
-		ret = mdev->ops->meram_update(mdev, cfg,
+		ret = mdev->ops->meram_update(mdev, ch->meram,
 					base_addr_y, base_addr_c,
 					&base_addr_y, &base_addr_c);
 		if (ret)
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index 19a4cd74c89..bf1707cd365 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -59,7 +59,7 @@ struct sh_mobile_lcdc_chan {
 	unsigned long *reg_offs;
 	unsigned long ldmt1r_value;
 	unsigned long enabled; /* ME and SE in LDCNT2R */
-	int meram_enabled;
+	void *meram;
 
 	struct mutex open_lock;		/* protects the use counter */
 	int use_count;
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 92dc9bd5b66..085c49ac99d 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/genalloc.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -106,14 +107,16 @@ static const unsigned long icb_regs[] = {
 /*
  * sh_mobile_meram_icb - MERAM ICB information
  * @regs: Registers cache
+ * @index: ICB index
  * @offset: MERAM block offset
- * @size: MERAM block size in bytes
+ * @size: MERAM block size in KiB
  * @cache_unit: Bytes to cache per ICB
  * @pixelformat: Video pixel format of the data stored in the ICB
  * @current_reg: Which of Start Address Register A (0) or B (1) is in use
  */
 struct sh_mobile_meram_icb {
 	unsigned long regs[ICB_REGS_SIZE];
+	unsigned int index;
 	unsigned long offset;
 	unsigned int size;
 
@@ -124,6 +127,16 @@ struct sh_mobile_meram_icb {
 
 #define MERAM_ICB_NUM			32
 
+struct sh_mobile_meram_fb_plane {
+	struct sh_mobile_meram_icb *marker;
+	struct sh_mobile_meram_icb *cache;
+};
+
+struct sh_mobile_meram_fb_cache {
+	unsigned int nplanes;
+	struct sh_mobile_meram_fb_plane planes[2];
+};
+
 /*
  * sh_mobile_meram_priv - MERAM device
  * @base: Registers base address
@@ -184,54 +197,46 @@ static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off)
  * Allocation
  */
 
-/* Check if there's no overlaps in MERAM allocation. */
-static int meram_check_overlap(struct sh_mobile_meram_priv *priv,
-			       const struct sh_mobile_meram_icb_cfg *new)
+/* Allocate ICBs and MERAM for a plane. */
+static int __meram_alloc(struct sh_mobile_meram_priv *priv,
+			 struct sh_mobile_meram_fb_plane *plane,
+			 size_t size)
 {
-	/* valid ICB? */
-	if (new->marker_icb & ~0x1f || new->cache_icb & ~0x1f)
-		return 1;
-
-	if (test_bit(new->marker_icb, &priv->used_icb) ||
-	    test_bit(new->cache_icb,  &priv->used_icb))
-		return  1;
+	unsigned long mem;
+	unsigned long idx;
 
-	return 0;
-}
+	idx = find_first_zero_bit(&priv->used_icb, 28);
+	if (idx == 28)
+		return -ENOMEM;
+	plane->cache = &priv->icbs[idx];
 
-/* Allocate memory for the ICBs and mark them as used. */
-static int meram_alloc(struct sh_mobile_meram_priv *priv,
-		       const struct sh_mobile_meram_icb_cfg *new,
-		       int pixelformat)
-{
-	struct sh_mobile_meram_icb *marker = &priv->icbs[new->marker_icb];
-	unsigned long mem;
+	idx = find_next_zero_bit(&priv->used_icb, 32, 28);
+	if (idx == 32)
+		return -ENOMEM;
+	plane->marker = &priv->icbs[idx];
 
-	mem = gen_pool_alloc(priv->pool, new->meram_size * 1024);
+	mem = gen_pool_alloc(priv->pool, size * 1024);
 	if (mem == 0)
 		return -ENOMEM;
 
-	__set_bit(new->marker_icb, &priv->used_icb);
-	__set_bit(new->cache_icb, &priv->used_icb);
+	__set_bit(plane->marker->index, &priv->used_icb);
+	__set_bit(plane->cache->index, &priv->used_icb);
 
-	marker->offset = mem - priv->meram;
-	marker->size = new->meram_size * 1024;
-	marker->current_reg = 1;
-	marker->pixelformat = pixelformat;
+	plane->marker->offset = mem - priv->meram;
+	plane->marker->size = size;
 
 	return 0;
 }
 
-/* Unmark the specified ICB as used. */
-static void meram_free(struct sh_mobile_meram_priv *priv,
-		       const struct sh_mobile_meram_icb_cfg *icb)
+/* Free ICBs and MERAM for a plane. */
+static void __meram_free(struct sh_mobile_meram_priv *priv,
+			 struct sh_mobile_meram_fb_plane *plane)
 {
-	struct sh_mobile_meram_icb *marker = &priv->icbs[icb->marker_icb];
+	gen_pool_free(priv->pool, priv->meram + plane->marker->offset,
+		      plane->marker->size * 1024);
 
-	gen_pool_free(priv->pool, priv->meram + marker->offset, marker->size);
-
-	__clear_bit(icb->marker_icb, &priv->used_icb);
-	__clear_bit(icb->cache_icb, &priv->used_icb);
+	__clear_bit(plane->marker->index, &priv->used_icb);
+	__clear_bit(plane->cache->index, &priv->used_icb);
 }
 
 /* Is this a YCbCr(NV12, NV16 or NV24) colorspace? */
@@ -243,42 +248,96 @@ static int is_nvcolor(int cspace)
 	return 0;
 }
 
+/* Allocate memory for the ICBs and mark them as used. */
+static struct sh_mobile_meram_fb_cache *
+meram_alloc(struct sh_mobile_meram_priv *priv,
+	    const struct sh_mobile_meram_cfg *cfg,
+	    int pixelformat)
+{
+	struct sh_mobile_meram_fb_cache *cache;
+	unsigned int nplanes = is_nvcolor(pixelformat) ? 2 : 1;
+	int ret;
+
+	if (cfg->icb[0].meram_size == 0)
+		return ERR_PTR(-EINVAL);
+
+	if (nplanes == 2 && cfg->icb[1].meram_size == 0)
+		return ERR_PTR(-EINVAL);
+
+	cache = kzalloc(sizeof(*cache), GFP_KERNEL);
+	if (cache == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	cache->nplanes = nplanes;
+
+	ret = __meram_alloc(priv, &cache->planes[0], cfg->icb[0].meram_size);
+	if (ret < 0)
+		goto error;
+
+	cache->planes[0].marker->current_reg = 1;
+	cache->planes[0].marker->pixelformat = pixelformat;
+
+	if (cache->nplanes == 1)
+		return cache;
+
+	ret = __meram_alloc(priv, &cache->planes[1], cfg->icb[1].meram_size);
+	if (ret < 0) {
+		__meram_free(priv, &cache->planes[0]);
+		goto error;
+	}
+
+	return cache;
+
+error:
+	kfree(cache);
+	return ERR_PTR(-ENOMEM);
+}
+
+/* Unmark the specified ICB as used. */
+static void meram_free(struct sh_mobile_meram_priv *priv,
+		       struct sh_mobile_meram_fb_cache *cache)
+{
+	__meram_free(priv, &cache->planes[0]);
+	if (cache->nplanes == 2)
+		__meram_free(priv, &cache->planes[1]);
+
+	kfree(cache);
+}
+
 /* Set the next address to fetch. */
 static void meram_set_next_addr(struct sh_mobile_meram_priv *priv,
-				const struct sh_mobile_meram_cfg *cfg,
+				struct sh_mobile_meram_fb_cache *cache,
 				unsigned long base_addr_y,
 				unsigned long base_addr_c)
 {
-	struct sh_mobile_meram_icb *icb = &priv->icbs[cfg->icb[0].marker_icb];
+	struct sh_mobile_meram_icb *icb = cache->planes[0].marker;
 	unsigned long target;
 
 	icb->current_reg ^= 1;
 	target = icb->current_reg ? MExxSARB : MExxSARA;
 
 	/* set the next address to fetch */
-	meram_write_icb(priv->base, cfg->icb[0].cache_icb, target,
+	meram_write_icb(priv->base, cache->planes[0].cache->index, target,
 			base_addr_y);
-	meram_write_icb(priv->base, cfg->icb[0].marker_icb, target,
-			base_addr_y +
-			priv->icbs[cfg->icb[0].marker_icb].cache_unit);
-
-	if (is_nvcolor(icb->pixelformat)) {
-		meram_write_icb(priv->base, cfg->icb[1].cache_icb,  target,
-				base_addr_c);
-		meram_write_icb(priv->base, cfg->icb[1].marker_icb, target,
-				base_addr_c +
-				priv->icbs[cfg->icb[1].marker_icb].cache_unit);
+	meram_write_icb(priv->base, cache->planes[0].marker->index, target,
+			base_addr_y + cache->planes[0].marker->cache_unit);
+
+	if (cache->nplanes == 2) {
+		meram_write_icb(priv->base, cache->planes[1].cache->index,
+				target, base_addr_c);
+		meram_write_icb(priv->base, cache->planes[1].marker->index,
+				target, base_addr_c +
+				cache->planes[1].marker->cache_unit);
 	}
 }
 
 /* Get the next ICB address. */
 static void
 meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
-			const struct sh_mobile_meram_cfg *cfg,
+			struct sh_mobile_meram_fb_cache *cache,
 			unsigned long *icb_addr_y, unsigned long *icb_addr_c)
 {
-	struct sh_mobile_meram_priv *priv = pdata->priv;
-	struct sh_mobile_meram_icb *icb = &priv->icbs[cfg->icb[0].marker_icb];
+	struct sh_mobile_meram_icb *icb = cache->planes[0].marker;
 	unsigned long icb_offset;
 
 	if (pdata->addr_mode == SH_MOBILE_MERAM_MODE0)
@@ -286,9 +345,10 @@ meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 	else
 		icb_offset = 0xc0000000 | (icb->current_reg << 23);
 
-	*icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24);
-	if (is_nvcolor(icb->pixelformat))
-		*icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24);
+	*icb_addr_y = icb_offset | (cache->planes[0].marker->index << 24);
+	if (cache->nplanes == 2)
+		*icb_addr_c = icb_offset
+			    | (cache->planes[1].marker->index << 24);
 }
 
 #define MERAM_CALC_BYTECOUNT(x, y) \
@@ -296,11 +356,11 @@ meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata,
 
 /* Initialize MERAM. */
 static int meram_init(struct sh_mobile_meram_priv *priv,
-		      const struct sh_mobile_meram_icb_cfg *icb,
+		      struct sh_mobile_meram_fb_plane *plane,
 		      unsigned int xres, unsigned int yres,
 		      unsigned int *out_pitch)
 {
-	struct sh_mobile_meram_icb *marker = &priv->icbs[icb->marker_icb];
+	struct sh_mobile_meram_icb *marker = plane->marker;
 	unsigned long total_byte_count = MERAM_CALC_BYTECOUNT(xres, yres);
 	unsigned long bnm;
 	unsigned int lcdc_pitch;
@@ -319,13 +379,13 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 		lcdc_pitch = xpitch = MERAM_LINE_WIDTH;
 		line_cnt = total_byte_count >> 11;
 		*out_pitch = xres;
-		save_lines = (icb->meram_size / 16 / MERAM_SEC_LINE);
+		save_lines = plane->marker->size / 16 / MERAM_SEC_LINE;
 		save_lines *= MERAM_SEC_LINE;
 	} else {
 		xpitch = xres;
 		line_cnt = yres;
 		*out_pitch = lcdc_pitch;
-		save_lines = icb->meram_size / (lcdc_pitch >> 10) / 2;
+		save_lines = plane->marker->size / (lcdc_pitch >> 10) / 2;
 		save_lines &= 0xff;
 	}
 	bnm = (save_lines - 1) << 16;
@@ -333,20 +393,20 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 	/* TODO: we better to check if we have enough MERAM buffer size */
 
 	/* set up ICB */
-	meram_write_icb(priv->base, icb->cache_icb,  MExxBSIZE,
+	meram_write_icb(priv->base, plane->cache->index,  MExxBSIZE,
 			MERAM_MExxBSIZE_VAL(0x0, line_cnt - 1, xpitch - 1));
-	meram_write_icb(priv->base, icb->marker_icb, MExxBSIZE,
+	meram_write_icb(priv->base, plane->marker->index, MExxBSIZE,
 			MERAM_MExxBSIZE_VAL(0xf, line_cnt - 1, xpitch - 1));
 
-	meram_write_icb(priv->base, icb->cache_icb,  MExxMNCF, bnm);
-	meram_write_icb(priv->base, icb->marker_icb, MExxMNCF, bnm);
+	meram_write_icb(priv->base, plane->cache->index,  MExxMNCF, bnm);
+	meram_write_icb(priv->base, plane->marker->index, MExxMNCF, bnm);
 
-	meram_write_icb(priv->base, icb->cache_icb,  MExxSBSIZE, xpitch);
-	meram_write_icb(priv->base, icb->marker_icb, MExxSBSIZE, xpitch);
+	meram_write_icb(priv->base, plane->cache->index,  MExxSBSIZE, xpitch);
+	meram_write_icb(priv->base, plane->marker->index, MExxSBSIZE, xpitch);
 
 	/* save a cache unit size */
-	priv->icbs[icb->cache_icb].cache_unit = xres * save_lines;
-	priv->icbs[icb->marker_icb].cache_unit = xres * save_lines;
+	plane->cache->cache_unit = xres * save_lines;
+	plane->marker->cache_unit = xres * save_lines;
 
 	/*
 	 * Set MERAM for framebuffer
@@ -354,13 +414,13 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 	 * we also chain the cache_icb and the marker_icb.
 	 * we also split the allocated MERAM buffer between two ICBs.
 	 */
-	meram_write_icb(priv->base, icb->cache_icb, MExxCTL,
-			MERAM_MExxCTL_VAL(icb->marker_icb, marker->offset) |
-			MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
+	meram_write_icb(priv->base, plane->cache->index, MExxCTL,
+			MERAM_MExxCTL_VAL(plane->marker->index, marker->offset)
+			| MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
 			MExxCTL_MD_FB);
-	meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
-			MERAM_MExxCTL_VAL(icb->cache_icb, marker->offset +
-					  icb->meram_size / 2) |
+	meram_write_icb(priv->base, plane->marker->index, MExxCTL,
+			MERAM_MExxCTL_VAL(plane->cache->index, marker->offset +
+					  plane->marker->size / 2) |
 			MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM |
 			MExxCTL_MD_FB);
 
@@ -368,45 +428,44 @@ static int meram_init(struct sh_mobile_meram_priv *priv,
 }
 
 static void meram_deinit(struct sh_mobile_meram_priv *priv,
-			 const struct sh_mobile_meram_icb_cfg *icb)
+			 struct sh_mobile_meram_fb_plane *plane)
 {
 	/* disable ICB */
-	meram_write_icb(priv->base, icb->cache_icb,  MExxCTL,
+	meram_write_icb(priv->base, plane->cache->index,  MExxCTL,
 			MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
-	meram_write_icb(priv->base, icb->marker_icb, MExxCTL,
+	meram_write_icb(priv->base, plane->marker->index, MExxCTL,
 			MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF);
 
-	priv->icbs[icb->cache_icb].cache_unit = 0;
-	priv->icbs[icb->marker_icb].cache_unit = 0;
+	plane->cache->cache_unit = 0;
+	plane->marker->cache_unit = 0;
 }
 
 /* -----------------------------------------------------------------------------
  * Registration/unregistration
  */
 
-static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
-				    const struct sh_mobile_meram_cfg *cfg,
-				    unsigned int xres, unsigned int yres,
-				    unsigned int pixelformat,
-				    unsigned long base_addr_y,
-				    unsigned long base_addr_c,
-				    unsigned long *icb_addr_y,
-				    unsigned long *icb_addr_c,
-				    unsigned int *pitch)
+static void *sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
+				      const struct sh_mobile_meram_cfg *cfg,
+				      unsigned int xres, unsigned int yres,
+				      unsigned int pixelformat,
+				      unsigned long base_addr_y,
+				      unsigned long base_addr_c,
+				      unsigned long *icb_addr_y,
+				      unsigned long *icb_addr_c,
+				      unsigned int *pitch)
 {
-	struct platform_device *pdev;
+	struct sh_mobile_meram_fb_cache *cache;
 	struct sh_mobile_meram_priv *priv;
+	struct platform_device *pdev;
 	unsigned int out_pitch;
-	unsigned int n;
-	int error = 0;
 
 	if (!pdata || !pdata->priv || !pdata->pdev || !cfg)
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 
 	if (pixelformat != SH_MOBILE_MERAM_PF_NV &&
 	    pixelformat != SH_MOBILE_MERAM_PF_NV24 &&
 	    pixelformat != SH_MOBILE_MERAM_PF_RGB)
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 
 	priv = pdata->priv;
 	pdev = pdata->pdev;
@@ -418,120 +477,82 @@ static int sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 	/* we can't handle wider than 8192px */
 	if (xres > 8192) {
 		dev_err(&pdev->dev, "width exceeding the limit (> 8192).");
-		return -EINVAL;
-	}
-
-	/* do we have at least one ICB config? */
-	if (cfg->icb[0].marker_icb < 0 || cfg->icb[0].cache_icb < 0) {
-		dev_err(&pdev->dev, "at least one ICB is required.");
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	mutex_lock(&priv->lock);
 
-	/* make sure that there's no overlaps */
-	if (meram_check_overlap(priv, &cfg->icb[0])) {
-		dev_err(&pdev->dev, "conflicting config detected.");
-		error = -EINVAL;
-		goto err;
-	}
-	n = 1;
-
-	/* do the same if we have the second ICB set */
-	if (cfg->icb[1].marker_icb >= 0 && cfg->icb[1].cache_icb >= 0) {
-		if (meram_check_overlap(priv, &cfg->icb[1])) {
-			dev_err(&pdev->dev, "conflicting config detected.");
-			error = -EINVAL;
-			goto err;
-		}
-		n = 2;
-	}
-
-	if (is_nvcolor(pixelformat) && n != 2) {
-		dev_err(&pdev->dev, "requires two ICB sets for planar Y/C.");
-		error =  -EINVAL;
-		goto err;
-	}
-
 	/* We now register the ICBs and allocate the MERAM regions. */
-	error = meram_alloc(priv, &cfg->icb[0], pixelformat);
-	if (error < 0)
+	cache = meram_alloc(priv, cfg, pixelformat);
+	if (IS_ERR(cache)) {
+		dev_err(&pdev->dev, "MERAM allocation failed (%ld).",
+			PTR_ERR(cache));
 		goto err;
-
-	if (is_nvcolor(pixelformat)) {
-		error = meram_alloc(priv, &cfg->icb[1], pixelformat);
-		if (error < 0) {
-			meram_free(priv, &cfg->icb[0]);
-			goto err;
-		}
 	}
 
 	/* initialize MERAM */
-	meram_init(priv, &cfg->icb[0], xres, yres, &out_pitch);
+	meram_init(priv, &cache->planes[0], xres, yres, &out_pitch);
 	*pitch = out_pitch;
 	if (pixelformat == SH_MOBILE_MERAM_PF_NV)
-		meram_init(priv, &cfg->icb[1], xres, (yres + 1) / 2,
+		meram_init(priv, &cache->planes[1], xres, (yres + 1) / 2,
 			&out_pitch);
 	else if (pixelformat == SH_MOBILE_MERAM_PF_NV24)
-		meram_init(priv, &cfg->icb[1], 2 * xres, (yres + 1) / 2,
+		meram_init(priv, &cache->planes[1], 2 * xres, (yres + 1) / 2,
 			&out_pitch);
 
-	meram_set_next_addr(priv, cfg, base_addr_y, base_addr_c);
-	meram_get_next_icb_addr(pdata, cfg, icb_addr_y, icb_addr_c);
+	meram_set_next_addr(priv, cache, base_addr_y, base_addr_c);
+	meram_get_next_icb_addr(pdata, cache, icb_addr_y, icb_addr_c);
 
 	dev_dbg(&pdev->dev, "registered - can access via y=%08lx, c=%08lx",
 		*icb_addr_y, *icb_addr_c);
 
 err:
 	mutex_unlock(&priv->lock);
-	return error;
+	return cache;
 }
 
-static int sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata,
-				      const struct sh_mobile_meram_cfg *cfg)
+static int
+sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata, void *data)
 {
+	struct sh_mobile_meram_fb_cache *cache = data;
 	struct sh_mobile_meram_priv *priv;
-	struct sh_mobile_meram_icb *icb;
 
-	if (!pdata || !pdata->priv || !cfg)
+	if (!pdata || !pdata->priv || !data)
 		return -EINVAL;
 
 	priv = pdata->priv;
-	icb = &priv->icbs[cfg->icb[0].marker_icb];
 
 	mutex_lock(&priv->lock);
 
-	/* deinit & unmark */
-	if (is_nvcolor(icb->pixelformat)) {
-		meram_deinit(priv, &cfg->icb[1]);
-		meram_free(priv, &cfg->icb[1]);
-	}
-	meram_deinit(priv, &cfg->icb[0]);
-	meram_free(priv, &cfg->icb[0]);
+	/* deinit & free */
+	meram_deinit(priv, &cache->planes[0]);
+	if (cache->nplanes == 2)
+		meram_deinit(priv, &cache->planes[1]);
+
+	meram_free(priv, cache);
 
 	mutex_unlock(&priv->lock);
 
 	return 0;
 }
 
-static int sh_mobile_meram_update(struct sh_mobile_meram_info *pdata,
-				  const struct sh_mobile_meram_cfg *cfg,
-				  unsigned long base_addr_y,
-				  unsigned long base_addr_c,
-				  unsigned long *icb_addr_y,
-				  unsigned long *icb_addr_c)
+static int
+sh_mobile_meram_update(struct sh_mobile_meram_info *pdata, void *data,
+		       unsigned long base_addr_y, unsigned long base_addr_c,
+		       unsigned long *icb_addr_y, unsigned long *icb_addr_c)
 {
+	struct sh_mobile_meram_fb_cache *cache = data;
 	struct sh_mobile_meram_priv *priv;
 
-	if (!pdata || !pdata->priv || !cfg)
+	if (!pdata || !pdata->priv || !data)
 		return -EINVAL;
 
 	priv = pdata->priv;
 
 	mutex_lock(&priv->lock);
 
-	meram_set_next_addr(priv, cfg, base_addr_y, base_addr_c);
-	meram_get_next_icb_addr(pdata, cfg, icb_addr_y, icb_addr_c);
+	meram_set_next_addr(priv, cache, base_addr_y, base_addr_c);
+	meram_get_next_icb_addr(pdata, cache, icb_addr_y, icb_addr_c);
 
 	mutex_unlock(&priv->lock);
 
@@ -607,6 +628,7 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 	struct sh_mobile_meram_info *pdata = pdev->dev.platform_data;
 	struct resource *regs;
 	struct resource *meram;
+	unsigned int i;
 	int error;
 
 	if (!pdata) {
@@ -627,8 +649,13 @@ static int __devinit sh_mobile_meram_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	/* initialize private data */
+	/* Initialize private data. */
 	mutex_init(&priv->lock);
+	priv->used_icb = pdata->reserved_icbs;
+
+	for (i = 0; i < MERAM_ICB_NUM; ++i)
+		priv->icbs[i].index = i;
+
 	pdata->ops = &sh_mobile_meram_ops;
 	pdata->priv = priv;
 	pdata->pdev = pdev;
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index f7700fcb054..e0f650c843c 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -17,8 +17,13 @@ enum {
 struct sh_mobile_meram_priv;
 struct sh_mobile_meram_ops;
 
+/*
+ * struct sh_mobile_meram_info - MERAM platform data
+ * @reserved_icbs: Bitmask of reserved ICBs (for instance used through UIO)
+ */
 struct sh_mobile_meram_info {
 	int				addr_mode;
+	u32				reserved_icbs;
 	struct sh_mobile_meram_ops	*ops;
 	struct sh_mobile_meram_priv	*priv;
 	struct platform_device		*pdev;
@@ -39,23 +44,23 @@ struct module;
 struct sh_mobile_meram_ops {
 	struct module	*module;
 	/* register usage of meram */
-	int (*meram_register)(struct sh_mobile_meram_info *meram_dev,
-			      const struct sh_mobile_meram_cfg *cfg,
-			      unsigned int xres, unsigned int yres,
-			      unsigned int pixelformat,
-			      unsigned long base_addr_y,
-			      unsigned long base_addr_c,
-			      unsigned long *icb_addr_y,
-			      unsigned long *icb_addr_c,
-			      unsigned int *pitch);
+	void *(*meram_register)(struct sh_mobile_meram_info *meram_dev,
+				const struct sh_mobile_meram_cfg *cfg,
+				unsigned int xres, unsigned int yres,
+				unsigned int pixelformat,
+				unsigned long base_addr_y,
+				unsigned long base_addr_c,
+				unsigned long *icb_addr_y,
+				unsigned long *icb_addr_c,
+				unsigned int *pitch);
 
 	/* unregister usage of meram */
 	int (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
-				const struct sh_mobile_meram_cfg *cfg);
+				void *data);
 
 	/* update meram settings */
 	int (*meram_update)(struct sh_mobile_meram_info *meram_dev,
-			    const struct sh_mobile_meram_cfg *cfg,
+			    void *data,
 			    unsigned long base_addr_y,
 			    unsigned long base_addr_c,
 			    unsigned long *icb_addr_y,
-- 
cgit v1.2.3-70-g09d2


From b5ef967df13d4d243a2954c32bdd9181a1ee7382 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 22 Nov 2011 00:56:58 +0100
Subject: fbdev: sh_mobile_lcdc: Don't store copy of platform data

Instead of copying the whole platform data structure to struct
sh_mobile_lcdc_chan, store a const pointer to the channel platform data.

MERAM configuration information needs to be changed at runtime, so copy
it to struct sh_mobile_lcdc_chan.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c | 71 ++++++++++++++++++++--------------------
 drivers/video/sh_mobile_lcdcfb.h |  3 +-
 include/video/sh_mobile_lcdc.h   |  2 +-
 3 files changed, 38 insertions(+), 38 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index d0c90269922..03385161832 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -116,7 +116,7 @@ static bool banked(int reg_nr)
 
 static int lcdc_chan_is_sublcd(struct sh_mobile_lcdc_chan *chan)
 {
-	return chan->cfg.chan == LCDC_CHAN_SUBLCD;
+	return chan->cfg->chan == LCDC_CHAN_SUBLCD;
 }
 
 static void lcdc_write_chan(struct sh_mobile_lcdc_chan *chan,
@@ -289,7 +289,7 @@ static void sh_mobile_lcdc_deferred_io(struct fb_info *info,
 				       struct list_head *pagelist)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
-	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
+	const struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg->panel_cfg;
 
 	/* enable clocks before accessing hardware */
 	sh_mobile_lcdc_clk_on(ch->lcdc);
@@ -336,7 +336,7 @@ static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
 
 static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 {
-	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
+	const struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg->panel_cfg;
 
 	if (ch->tx_dev) {
 		int ret;
@@ -356,7 +356,7 @@ static void sh_mobile_lcdc_display_on(struct sh_mobile_lcdc_chan *ch)
 
 static void sh_mobile_lcdc_display_off(struct sh_mobile_lcdc_chan *ch)
 {
-	struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg.panel_cfg;
+	const struct sh_mobile_lcdc_panel_cfg *panel = &ch->cfg->panel_cfg;
 
 	if (panel->display_off)
 		panel->display_off();
@@ -644,16 +644,16 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 	tmp = ch->ldmt1r_value;
 	tmp |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : LDMT1R_VPOL;
 	tmp |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : LDMT1R_HPOL;
-	tmp |= (ch->cfg.flags & LCDC_FLAGS_DWPOL) ? LDMT1R_DWPOL : 0;
-	tmp |= (ch->cfg.flags & LCDC_FLAGS_DIPOL) ? LDMT1R_DIPOL : 0;
-	tmp |= (ch->cfg.flags & LCDC_FLAGS_DAPOL) ? LDMT1R_DAPOL : 0;
-	tmp |= (ch->cfg.flags & LCDC_FLAGS_HSCNT) ? LDMT1R_HSCNT : 0;
-	tmp |= (ch->cfg.flags & LCDC_FLAGS_DWCNT) ? LDMT1R_DWCNT : 0;
+	tmp |= (ch->cfg->flags & LCDC_FLAGS_DWPOL) ? LDMT1R_DWPOL : 0;
+	tmp |= (ch->cfg->flags & LCDC_FLAGS_DIPOL) ? LDMT1R_DIPOL : 0;
+	tmp |= (ch->cfg->flags & LCDC_FLAGS_DAPOL) ? LDMT1R_DAPOL : 0;
+	tmp |= (ch->cfg->flags & LCDC_FLAGS_HSCNT) ? LDMT1R_HSCNT : 0;
+	tmp |= (ch->cfg->flags & LCDC_FLAGS_DWCNT) ? LDMT1R_DWCNT : 0;
 	lcdc_write_chan(ch, LDMT1R, tmp);
 
 	/* setup SYS bus */
-	lcdc_write_chan(ch, LDMT2R, ch->cfg.sys_bus_cfg.ldmt2r);
-	lcdc_write_chan(ch, LDMT3R, ch->cfg.sys_bus_cfg.ldmt3r);
+	lcdc_write_chan(ch, LDMT2R, ch->cfg->sys_bus_cfg.ldmt2r);
+	lcdc_write_chan(ch, LDMT3R, ch->cfg->sys_bus_cfg.ldmt3r);
 
 	/* horizontal configuration */
 	h_total = mode->xres + mode->hsync_len + mode->left_margin
@@ -717,7 +717,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* Power supply */
 		lcdc_write_chan(ch, LDPMR, 0);
 
-		m = ch->cfg.clock_divider;
+		m = ch->cfg->clock_divider;
 		if (!m)
 			continue;
 
@@ -768,7 +768,7 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		 * continuous read mode.
 		 */
 		if (ch->ldmt1r_value & LDMT1R_IFM &&
-		    ch->cfg.sys_bus_cfg.deferred_io_msec) {
+		    ch->cfg->sys_bus_cfg.deferred_io_msec) {
 			lcdc_write_chan(ch, LDSM1R, LDSM1R_OS);
 			lcdc_write(priv, _LDINTR, LDINTR_FE);
 		} else {
@@ -822,13 +822,13 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	lcdc_wait_bit(priv, _LDCNT2R, LDCNT2R_BR, 0);
 
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
-		struct sh_mobile_lcdc_panel_cfg *panel;
+		const struct sh_mobile_lcdc_panel_cfg *panel;
 
 		ch = &priv->ch[k];
 		if (!ch->enabled)
 			continue;
 
-		panel = &ch->cfg.panel_cfg;
+		panel = &ch->cfg->panel_cfg;
 		if (panel->setup_sys) {
 			ret = panel->setup_sys(ch, &sh_mobile_lcdc_sys_bus_ops);
 			if (ret)
@@ -838,7 +838,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 	/* Compute frame buffer base address and pitch for each channel. */
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
-		struct sh_mobile_meram_cfg *cfg;
 		int pixelformat;
 		void *meram;
 
@@ -850,8 +849,8 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		ch->base_addr_c = ch->base_addr_y + ch->xres * ch->yres_virtual;
 
 		/* Enable MERAM if possible. */
-		cfg = ch->cfg.meram_cfg;
-		if (mdev == NULL || mdev->ops == NULL || cfg == NULL)
+		if (mdev == NULL || mdev->ops == NULL ||
+		    ch->cfg->meram_cfg == NULL)
 			continue;
 
 		/* we need to de-init configured ICBs before we can
@@ -881,8 +880,8 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 			break;
 		}
 
-		meram = mdev->ops->meram_register(mdev, cfg, ch->pitch,
-					ch->yres, pixelformat,
+		meram = mdev->ops->meram_register(mdev, ch->cfg->meram_cfg,
+					ch->pitch, ch->yres, pixelformat,
 					ch->base_addr_y, ch->base_addr_c,
 					&ch->base_addr_y, &ch->base_addr_c,
 					&ch->pitch);
@@ -901,7 +900,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		if (!ch->enabled)
 			continue;
 
-		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
+		tmp = ch->cfg->sys_bus_cfg.deferred_io_msec;
 		if (ch->ldmt1r_value & LDMT1R_IFM && tmp) {
 			ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
 			ch->defio.delay = msecs_to_jiffies(tmp);
@@ -1210,8 +1209,8 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 	 * distance between two modes is defined as the size of the
 	 * non-overlapping parts of the two rectangles.
 	 */
-	for (i = 0; i < ch->cfg.num_modes; ++i) {
-		const struct fb_videomode *mode = &ch->cfg.lcd_modes[i];
+	for (i = 0; i < ch->cfg->num_modes; ++i) {
+		const struct fb_videomode *mode = &ch->cfg->lcd_modes[i];
 		unsigned int dist;
 
 		/* We can only round up. */
@@ -1230,7 +1229,7 @@ static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *in
 	}
 
 	/* If no available mode can be used, return an error. */
-	if (ch->cfg.num_modes != 0) {
+	if (ch->cfg->num_modes != 0) {
 		if (best_dist == (unsigned int)-1)
 			return -EINVAL;
 
@@ -1440,7 +1439,7 @@ sh_mobile_lcdc_channel_fb_register(struct sh_mobile_lcdc_chan *ch)
 		return ret;
 
 	dev_info(ch->lcdc->dev, "registered %s/%s as %dx%d %dbpp.\n",
-		 dev_name(ch->lcdc->dev), (ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
+		 dev_name(ch->lcdc->dev), (ch->cfg->chan == LCDC_CHAN_MAINLCD) ?
 		 "mainlcd" : "sublcd", info->var.xres, info->var.yres,
 		 info->var.bits_per_pixel);
 
@@ -1525,8 +1524,8 @@ sh_mobile_lcdc_channel_fb_init(struct sh_mobile_lcdc_chan *ch,
 	 */
 	var = &info->var;
 	fb_videomode_to_var(var, mode);
-	var->width = ch->cfg.panel_cfg.width;
-	var->height = ch->cfg.panel_cfg.height;
+	var->width = ch->cfg->panel_cfg.width;
+	var->height = ch->cfg->panel_cfg.height;
 	var->yres_virtual = var->yres * 2;
 	var->activate = FB_ACTIVATE_NOW;
 
@@ -1558,14 +1557,14 @@ static int sh_mobile_lcdc_update_bl(struct backlight_device *bdev)
 	    bdev->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 		brightness = 0;
 
-	return ch->cfg.bl_info.set_brightness(brightness);
+	return ch->cfg->bl_info.set_brightness(brightness);
 }
 
 static int sh_mobile_lcdc_get_brightness(struct backlight_device *bdev)
 {
 	struct sh_mobile_lcdc_chan *ch = bl_get_data(bdev);
 
-	return ch->cfg.bl_info.get_brightness();
+	return ch->cfg->bl_info.get_brightness();
 }
 
 static int sh_mobile_lcdc_check_fb(struct backlight_device *bdev,
@@ -1586,7 +1585,7 @@ static struct backlight_device *sh_mobile_lcdc_bl_probe(struct device *parent,
 {
 	struct backlight_device *bl;
 
-	bl = backlight_device_register(ch->cfg.bl_info.name, parent, ch,
+	bl = backlight_device_register(ch->cfg->bl_info.name, parent, ch,
 				       &sh_mobile_lcdc_bl_ops, NULL);
 	if (IS_ERR(bl)) {
 		dev_err(parent, "unable to register backlight device: %ld\n",
@@ -1594,7 +1593,7 @@ static struct backlight_device *sh_mobile_lcdc_bl_probe(struct device *parent,
 		return NULL;
 	}
 
-	bl->props.max_brightness = ch->cfg.bl_info.max_brightness;
+	bl->props.max_brightness = ch->cfg->bl_info.max_brightness;
 	bl->props.brightness = bl->props.max_brightness;
 	backlight_update_status(bl);
 
@@ -1727,7 +1726,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 
 		if (ch->tx_dev) {
 			ch->tx_dev->lcdc = NULL;
-			module_put(ch->cfg.tx_dev->dev.driver->owner);
+			module_put(ch->cfg->tx_dev->dev.driver->owner);
 		}
 
 		sh_mobile_lcdc_channel_fb_cleanup(ch);
@@ -1758,7 +1757,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 
 static int __devinit sh_mobile_lcdc_check_interface(struct sh_mobile_lcdc_chan *ch)
 {
-	int interface_type = ch->cfg.interface_type;
+	int interface_type = ch->cfg->interface_type;
 
 	switch (interface_type) {
 	case RGB8:
@@ -1801,7 +1800,7 @@ sh_mobile_lcdc_channel_init(struct sh_mobile_lcdc_priv *priv,
 			    struct sh_mobile_lcdc_chan *ch)
 {
 	const struct sh_mobile_lcdc_format_info *format;
-	struct sh_mobile_lcdc_chan_cfg *cfg = &ch->cfg;
+	const struct sh_mobile_lcdc_chan_cfg *cfg = ch->cfg;
 	const struct fb_videomode *max_mode;
 	const struct fb_videomode *mode;
 	unsigned int num_modes;
@@ -1944,7 +1943,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		struct sh_mobile_lcdc_chan *ch = priv->ch + num_channels;
 
 		ch->lcdc = priv;
-		memcpy(&ch->cfg, &pdata->ch[i], sizeof(pdata->ch[i]));
+		ch->cfg = &pdata->ch[i];
 
 		error = sh_mobile_lcdc_check_interface(ch);
 		if (error) {
@@ -1956,7 +1955,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		ch->pan_offset = 0;
 
 		/* probe the backlight is there is one defined */
-		if (ch->cfg.bl_info.max_brightness)
+		if (ch->cfg->bl_info.max_brightness)
 			ch->bl = sh_mobile_lcdc_bl_probe(&pdev->dev, ch);
 
 		switch (pdata->ch[i].chan) {
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/sh_mobile_lcdcfb.h
index bf1707cd365..da1c26e78a5 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/sh_mobile_lcdcfb.h
@@ -54,7 +54,7 @@ struct sh_mobile_lcdc_entity {
 struct sh_mobile_lcdc_chan {
 	struct sh_mobile_lcdc_priv *lcdc;
 	struct sh_mobile_lcdc_entity *tx_dev;
-	struct sh_mobile_lcdc_chan_cfg cfg;
+	const struct sh_mobile_lcdc_chan_cfg *cfg;
 
 	unsigned long *reg_offs;
 	unsigned long ldmt1r_value;
@@ -66,6 +66,7 @@ struct sh_mobile_lcdc_chan {
 
 	void *fb_mem;
 	unsigned long fb_size;
+
 	dma_addr_t dma_handle;
 	unsigned long pan_offset;
 
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index 484b0a2d7b2..7571b27a0ba 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -178,7 +178,7 @@ struct sh_mobile_lcdc_chan_cfg {
 	struct sh_mobile_lcdc_panel_cfg panel_cfg;
 	struct sh_mobile_lcdc_bl_info bl_info;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
-	struct sh_mobile_meram_cfg *meram_cfg;
+	const struct sh_mobile_meram_cfg *meram_cfg;
 
 	struct platform_device *tx_dev;	/* HDMI/DSI transmitter device */
 };
-- 
cgit v1.2.3-70-g09d2


From 97d16fe69b6499a14a0c85c053f7bef54ce992a4 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 22 Nov 2011 00:56:58 +0100
Subject: fbdev: sh_mobile_meram: Don't perform update in register operation

Remove the RGB or Y/C base address update from the meram_register()
operation, as this belongs to the meram_update() operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c |  8 +++++---
 drivers/video/sh_mobile_meram.c  | 15 ++-------------
 include/video/sh_mobile_meram.h  |  4 ----
 3 files changed, 7 insertions(+), 20 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 03385161832..4b54cd5c956 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -882,11 +882,13 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 
 		meram = mdev->ops->meram_register(mdev, ch->cfg->meram_cfg,
 					ch->pitch, ch->yres, pixelformat,
-					ch->base_addr_y, ch->base_addr_c,
-					&ch->base_addr_y, &ch->base_addr_c,
 					&ch->pitch);
-		if (!IS_ERR(meram))
+		if (!IS_ERR(meram)) {
+			mdev->ops->meram_update(mdev, meram,
+					ch->base_addr_y, ch->base_addr_c,
+					&ch->base_addr_y, &ch->base_addr_c);
 			ch->meram = meram;
+		}
 	}
 
 	/* Start the LCDC. */
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 085c49ac99d..2ce0d8f72e3 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -448,10 +448,6 @@ static void *sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 				      const struct sh_mobile_meram_cfg *cfg,
 				      unsigned int xres, unsigned int yres,
 				      unsigned int pixelformat,
-				      unsigned long base_addr_y,
-				      unsigned long base_addr_c,
-				      unsigned long *icb_addr_y,
-				      unsigned long *icb_addr_c,
 				      unsigned int *pitch)
 {
 	struct sh_mobile_meram_fb_cache *cache;
@@ -470,9 +466,8 @@ static void *sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 	priv = pdata->priv;
 	pdev = pdata->pdev;
 
-	dev_dbg(&pdev->dev, "registering %dx%d (%s) (y=%08lx, c=%08lx)",
-		xres, yres, (!pixelformat) ? "yuv" : "rgb",
-		base_addr_y, base_addr_c);
+	dev_dbg(&pdev->dev, "registering %dx%d (%s)", xres, yres,
+		!pixelformat ? "yuv" : "rgb");
 
 	/* we can't handle wider than 8192px */
 	if (xres > 8192) {
@@ -500,12 +495,6 @@ static void *sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 		meram_init(priv, &cache->planes[1], 2 * xres, (yres + 1) / 2,
 			&out_pitch);
 
-	meram_set_next_addr(priv, cache, base_addr_y, base_addr_c);
-	meram_get_next_icb_addr(pdata, cache, icb_addr_y, icb_addr_c);
-
-	dev_dbg(&pdev->dev, "registered - can access via y=%08lx, c=%08lx",
-		*icb_addr_y, *icb_addr_c);
-
 err:
 	mutex_unlock(&priv->lock);
 	return cache;
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index 897960733cc..553335ce7a2 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -46,10 +46,6 @@ struct sh_mobile_meram_ops {
 				const struct sh_mobile_meram_cfg *cfg,
 				unsigned int xres, unsigned int yres,
 				unsigned int pixelformat,
-				unsigned long base_addr_y,
-				unsigned long base_addr_c,
-				unsigned long *icb_addr_y,
-				unsigned long *icb_addr_c,
 				unsigned int *pitch);
 
 	/* unregister usage of meram */
-- 
cgit v1.2.3-70-g09d2


From cdf88b9072a86545611b9c3f5597ebc47e50ffc1 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 22 Nov 2011 00:56:58 +0100
Subject: fbdev: sh_mobile_meram: Remove unneeded sanity checks

The meram_register(), meram_unregister() and meram_update() operations
check that the pointers they get from the caller are not NULL. Those
checks can be remove, as the caller already ensures that the pointers
are valid.

The platform sanity checks can also be removed, as the operations can't
be accessed without valid platform data anyway.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_lcdcfb.c |  5 +----
 drivers/video/sh_mobile_meram.c  | 32 ++++++--------------------------
 include/video/sh_mobile_meram.h  | 15 +++++++--------
 3 files changed, 14 insertions(+), 38 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 4b54cd5c956..7a0b301587f 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -1072,14 +1072,11 @@ static int sh_mobile_fb_pan_display(struct fb_var_screeninfo *var,
 
 	if (ch->meram) {
 		struct sh_mobile_meram_info *mdev;
-		int ret;
 
 		mdev = priv->meram_dev;
-		ret = mdev->ops->meram_update(mdev, ch->meram,
+		mdev->ops->meram_update(mdev, ch->meram,
 					base_addr_y, base_addr_c,
 					&base_addr_y, &base_addr_c);
-		if (ret)
-			return ret;
 	}
 
 	ch->base_addr_y = base_addr_y;
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 2ce0d8f72e3..d9f7a44c231 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -451,21 +451,15 @@ static void *sh_mobile_meram_register(struct sh_mobile_meram_info *pdata,
 				      unsigned int *pitch)
 {
 	struct sh_mobile_meram_fb_cache *cache;
-	struct sh_mobile_meram_priv *priv;
-	struct platform_device *pdev;
+	struct sh_mobile_meram_priv *priv = pdata->priv;
+	struct platform_device *pdev = pdata->pdev;
 	unsigned int out_pitch;
 
-	if (!pdata || !pdata->priv || !pdata->pdev || !cfg)
-		return ERR_PTR(-EINVAL);
-
 	if (pixelformat != SH_MOBILE_MERAM_PF_NV &&
 	    pixelformat != SH_MOBILE_MERAM_PF_NV24 &&
 	    pixelformat != SH_MOBILE_MERAM_PF_RGB)
 		return ERR_PTR(-EINVAL);
 
-	priv = pdata->priv;
-	pdev = pdata->pdev;
-
 	dev_dbg(&pdev->dev, "registering %dx%d (%s)", xres, yres,
 		!pixelformat ? "yuv" : "rgb");
 
@@ -500,16 +494,11 @@ err:
 	return cache;
 }
 
-static int
+static void
 sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata, void *data)
 {
 	struct sh_mobile_meram_fb_cache *cache = data;
-	struct sh_mobile_meram_priv *priv;
-
-	if (!pdata || !pdata->priv || !data)
-		return -EINVAL;
-
-	priv = pdata->priv;
+	struct sh_mobile_meram_priv *priv = pdata->priv;
 
 	mutex_lock(&priv->lock);
 
@@ -521,22 +510,15 @@ sh_mobile_meram_unregister(struct sh_mobile_meram_info *pdata, void *data)
 	meram_free(priv, cache);
 
 	mutex_unlock(&priv->lock);
-
-	return 0;
 }
 
-static int
+static void
 sh_mobile_meram_update(struct sh_mobile_meram_info *pdata, void *data,
 		       unsigned long base_addr_y, unsigned long base_addr_c,
 		       unsigned long *icb_addr_y, unsigned long *icb_addr_c)
 {
 	struct sh_mobile_meram_fb_cache *cache = data;
-	struct sh_mobile_meram_priv *priv;
-
-	if (!pdata || !pdata->priv || !data)
-		return -EINVAL;
-
-	priv = pdata->priv;
+	struct sh_mobile_meram_priv *priv = pdata->priv;
 
 	mutex_lock(&priv->lock);
 
@@ -544,8 +526,6 @@ sh_mobile_meram_update(struct sh_mobile_meram_info *pdata, void *data,
 	meram_get_next_icb_addr(pdata, cache, icb_addr_y, icb_addr_c);
 
 	mutex_unlock(&priv->lock);
-
-	return 0;
 }
 
 static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h
index 553335ce7a2..29b2fd3b147 100644
--- a/include/video/sh_mobile_meram.h
+++ b/include/video/sh_mobile_meram.h
@@ -49,16 +49,15 @@ struct sh_mobile_meram_ops {
 				unsigned int *pitch);
 
 	/* unregister usage of meram */
-	int (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
-				void *data);
+	void (*meram_unregister)(struct sh_mobile_meram_info *meram_dev,
+				 void *data);
 
 	/* update meram settings */
-	int (*meram_update)(struct sh_mobile_meram_info *meram_dev,
-			    void *data,
-			    unsigned long base_addr_y,
-			    unsigned long base_addr_c,
-			    unsigned long *icb_addr_y,
-			    unsigned long *icb_addr_c);
+	void (*meram_update)(struct sh_mobile_meram_info *meram_dev, void *data,
+			     unsigned long base_addr_y,
+			     unsigned long base_addr_c,
+			     unsigned long *icb_addr_y,
+			     unsigned long *icb_addr_c);
 };
 
 #endif /* __VIDEO_SH_MOBILE_MERAM_H__  */
-- 
cgit v1.2.3-70-g09d2


From af89956be14ae5bb304872756a47309edc2c94fb Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Tue, 22 Nov 2011 00:56:58 +0100
Subject: fbdev: sh_mobile_meram: Implement system suspend/resume

Supporting runtime PM is very nice, but that's not a reason not to
implement system suspend/resume properly.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/video/sh_mobile_meram.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index d9f7a44c231..82ba830bf95 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -539,7 +539,7 @@ static struct sh_mobile_meram_ops sh_mobile_meram_ops = {
  * Power management
  */
 
-static int sh_mobile_meram_runtime_suspend(struct device *dev)
+static int sh_mobile_meram_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
@@ -563,7 +563,7 @@ static int sh_mobile_meram_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int sh_mobile_meram_runtime_resume(struct device *dev)
+static int sh_mobile_meram_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev);
@@ -582,10 +582,9 @@ static int sh_mobile_meram_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops sh_mobile_meram_dev_pm_ops = {
-	.runtime_suspend = sh_mobile_meram_runtime_suspend,
-	.runtime_resume = sh_mobile_meram_runtime_resume,
-};
+static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops,
+			    sh_mobile_meram_suspend,
+			    sh_mobile_meram_resume, NULL);
 
 /* -----------------------------------------------------------------------------
  * Probe/remove and driver init/exit
-- 
cgit v1.2.3-70-g09d2


From df01d53068bdf31609aafd9a857901a1f16dfa52 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 7 Mar 2012 10:28:48 +0200
Subject: OMAPDSS: APPLY: fix clearing shadow dirty flag with manual update

Currently the shadow-dirty flags for manual update displays is cleared
in the apply_irq_handler when an update has finished. This is not
correct, as the shadow registers are taken into use (i.e. after that
they are not dirty) when the update is started.

Move the mgr_clear_shadow_dirty() call from apply_irq_handler to
dss_mgr_start_update() to fix this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 37 ++++++++++++++++++-------------------
 1 file changed, 18 insertions(+), 19 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 267c3f40d6c..b10b3bc1931 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -685,6 +685,22 @@ static void dss_set_go_bits(void)
 
 }
 
+static void mgr_clear_shadow_dirty(struct omap_overlay_manager *mgr)
+{
+	struct omap_overlay *ovl;
+	struct mgr_priv_data *mp;
+	struct ovl_priv_data *op;
+
+	mp = get_mgr_priv(mgr);
+	mp->shadow_info_dirty = false;
+
+	list_for_each_entry(ovl, &mgr->overlays, list) {
+		op = get_ovl_priv(ovl);
+		op->shadow_info_dirty = false;
+		op->shadow_extra_info_dirty = false;
+	}
+}
+
 void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
@@ -713,6 +729,8 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 
 	dispc_mgr_enable(mgr->id, true);
 
+	mgr_clear_shadow_dirty(mgr);
+
 	spin_unlock_irqrestore(&data_lock, flags);
 }
 
@@ -756,22 +774,6 @@ static void dss_unregister_vsync_isr(void)
 	dss_data.irq_enabled = false;
 }
 
-static void mgr_clear_shadow_dirty(struct omap_overlay_manager *mgr)
-{
-	struct omap_overlay *ovl;
-	struct mgr_priv_data *mp;
-	struct ovl_priv_data *op;
-
-	mp = get_mgr_priv(mgr);
-	mp->shadow_info_dirty = false;
-
-	list_for_each_entry(ovl, &mgr->overlays, list) {
-		op = get_ovl_priv(ovl);
-		op->shadow_info_dirty = false;
-		op->shadow_extra_info_dirty = false;
-	}
-}
-
 static void dss_apply_irq_handler(void *data, u32 mask)
 {
 	const int num_mgrs = dss_feat_get_num_mgrs();
@@ -801,9 +803,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
 
 			if (was_busy && !mp->busy)
 				mgr_clear_shadow_dirty(mgr);
-		} else {
-			if (was_updating && !mp->updating)
-				mgr_clear_shadow_dirty(mgr);
 		}
 	}
 
-- 
cgit v1.2.3-70-g09d2


From afb0499b0e43e2ee71a92bec9331635dc1173a07 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Sun, 11 Mar 2012 20:36:21 +0100
Subject: drivers/video/pvr2fb.c: ensure arguments to request_irq and free_irq
 are compatible

Convert calls to free_irq so that the second argument is the same as the
last argument of the corresponding call to request_irq.  Without this
property, free_irq does nothing.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/pvr2fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index 3a3fdc62c75..bcd44c32a2e 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -895,7 +895,7 @@ static int __init pvr2fb_dc_init(void)
 
 #ifdef CONFIG_PVR2_DMA
 	if (request_dma(pvr2dma, "pvr2") != 0) {
-		free_irq(HW_EVENT_VSYNC, 0);
+		free_irq(HW_EVENT_VSYNC, fb_info);
 		return -EBUSY;
 	}
 #endif
@@ -914,7 +914,7 @@ static void __exit pvr2fb_dc_exit(void)
 		currentpar->mmio_base = 0;
 	}
 
-	free_irq(HW_EVENT_VSYNC, 0);
+	free_irq(HW_EVENT_VSYNC, fb_info);
 #ifdef CONFIG_PVR2_DMA
 	free_dma(pvr2dma);
 #endif
-- 
cgit v1.2.3-70-g09d2


From 0fd1958050e92c859152e775e548284582335d25 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <rmallon@gmail.com>
Date: Sun, 22 Jan 2012 20:31:32 +1100
Subject: ep93xx: Use ioremap for backlight driver

The ep93xx backlight driver uses a single register within the
framebuffer's register space. Currently the backlight driver uses a
static IO mapping for the register since the memory cannot be
requested by both drivers.

Convert the static mapping to use ioremap so that we can remove the
dependency on mach/hardware.h. To do so, we need remove the
request_mem_region from both the backlight and framebuffer drivers,
since whichever driver is loaded second will fail with -EBUSY
otherwise.

A proper fix is still required, and a FIXME comment has been added to
both drivers.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
---
 arch/arm/mach-ep93xx/core.c         | 10 ++++++++++
 drivers/video/backlight/ep93xx_bl.c | 25 ++++++++++++++-----------
 drivers/video/ep93xx-fb.c           | 18 +++++++++---------
 3 files changed, 33 insertions(+), 20 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b5c1dae8327..c73e299b08a 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -682,9 +682,19 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+/* The backlight use a single register in the framebuffer's register space */
+#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
+
+static struct resource ep93xx_bl_resources[] = {
+	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
+		       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
+};
+
 static struct platform_device ep93xx_bl_device = {
 	.name		= "ep93xx-bl",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_bl_resources),
+	.resource	= ep93xx_bl_resources,
 };
 
 /**
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
index b62b8b9063b..08214e1f095 100644
--- a/drivers/video/backlight/ep93xx_bl.c
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -17,11 +17,6 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <mach/hardware.h>
-
-#define EP93XX_RASTER_REG(x)		(EP93XX_RASTER_BASE + (x))
-#define EP93XX_RASTER_BRIGHTNESS	EP93XX_RASTER_REG(0x20)
-
 #define EP93XX_MAX_COUNT		255
 #define EP93XX_MAX_BRIGHT		255
 #define EP93XX_DEF_BRIGHT		128
@@ -35,7 +30,7 @@ static int ep93xxbl_set(struct backlight_device *bl, int brightness)
 {
 	struct ep93xxbl *ep93xxbl = bl_get_data(bl);
 
-	__raw_writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
+	writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
 
 	ep93xxbl->brightness = brightness;
 
@@ -70,21 +65,29 @@ static int __init ep93xxbl_probe(struct platform_device *dev)
 	struct ep93xxbl *ep93xxbl;
 	struct backlight_device *bl;
 	struct backlight_properties props;
+	struct resource *res;
 
 	ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL);
 	if (!ep93xxbl)
 		return -ENOMEM;
 
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
 	/*
-	 * This register is located in the range already ioremap'ed by
-	 * the framebuffer driver.  A MFD driver seems a bit of overkill
-	 * to handle this so use the static I/O mapping; this address
-	 * is already virtual.
+	 * FIXME - We don't do a request_mem_region here because we are
+	 * sharing the register space with the framebuffer driver (see
+	 * drivers/video/ep93xx-fb.c) and doing so will cause the second
+	 * loaded driver to return -EBUSY.
 	 *
 	 * NOTE: No locking is required; the framebuffer does not touch
 	 * this register.
 	 */
-	ep93xxbl->mmio = EP93XX_RASTER_BRIGHTNESS;
+	ep93xxbl->mmio = devm_ioremap(&dev->dev, res->start,
+				      resource_size(res));
+	if (!ep93xxbl->mmio)
+		return -ENXIO;
 
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
index 2e830ec52a5..f8babbeee27 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/ep93xx-fb.c
@@ -519,12 +519,15 @@ static int __devinit ep93xxfb_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (!res) {
-		err = -EBUSY;
-		goto failed;
-	}
-
+	/*
+	 * FIXME - We don't do a request_mem_region here because we are
+	 * sharing the register space with the backlight driver (see
+	 * drivers/video/backlight/ep93xx_bl.c) and doing so will cause
+	 * the second loaded driver to return -EBUSY.
+	 *
+	 * NOTE: No locking is required; the backlight does not touch
+	 * any of the framebuffer registers.
+	 */
 	fbi->res = res;
 	fbi->mmio_base = ioremap(res->start, resource_size(res));
 	if (!fbi->mmio_base) {
@@ -586,8 +589,6 @@ failed:
 		clk_put(fbi->clk);
 	if (fbi->mmio_base)
 		iounmap(fbi->mmio_base);
-	if (fbi->res)
-		release_mem_region(fbi->res->start, resource_size(fbi->res));
 	ep93xxfb_dealloc_videomem(info);
 	if (&info->cmap)
 		fb_dealloc_cmap(&info->cmap);
@@ -608,7 +609,6 @@ static int __devexit ep93xxfb_remove(struct platform_device *pdev)
 	clk_disable(fbi->clk);
 	clk_put(fbi->clk);
 	iounmap(fbi->mmio_base);
-	release_mem_region(fbi->res->start, resource_size(fbi->res));
 	ep93xxfb_dealloc_videomem(info);
 	fb_dealloc_cmap(&info->cmap);
 
-- 
cgit v1.2.3-70-g09d2


From ce880cb860f36694d2cdebfac9e6ae18176fe4c4 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat, 28 Jan 2012 19:57:46 +0000
Subject: udlfb: remove sysfs framebuffer device with USB .disconnect()

The USB graphics card driver delays the unregistering of the framebuffer
device to a workqueue, which breaks the userspace visible remove uevent
sequence. Recent userspace tools started to support USB graphics card
hotplug out-of-the-box and rely on proper events sent by the kernel.

The framebuffer device is a direct child of the USB interface which is
removed immediately after the USB .disconnect() callback. But the fb device
in /sys stays around until its final cleanup, at a time where all the parent
devices have been removed already.

To work around that, we remove the sysfs fb device directly in the USB
.disconnect() callback and leave only the cleanup of the internal fb
data to the delayed work.

Before:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb0 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 remove   /2-1.2:1.0/graphics/fb0 (graphics)

After:
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 add      /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/graphics/fb1 (graphics)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0 (usb)
 remove   /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2 (usb)

Cc: stable@vger.kernel.org
Tested-by: Bernie Thompson <bernie@plugable.com>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/fbmem.c | 18 +++++++++++++++++-
 drivers/video/udlfb.c |  2 +-
 include/linux/fb.h    |  1 +
 3 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index ac9141b8535..c6ce416ab58 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1665,6 +1665,7 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	if (ret)
 		return -EINVAL;
 
+	unlink_framebuffer(fb_info);
 	if (fb_info->pixmap.addr &&
 	    (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
 		kfree(fb_info->pixmap.addr);
@@ -1672,7 +1673,6 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	registered_fb[i] = NULL;
 	num_registered_fb--;
 	fb_cleanup_device(fb_info);
-	device_destroy(fb_class, MKDEV(FB_MAJOR, i));
 	event.info = fb_info;
 	fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
 
@@ -1681,6 +1681,22 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
 	return 0;
 }
 
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+	int i;
+
+	i = fb_info->node;
+	if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
+		return -EINVAL;
+
+	if (fb_info->dev) {
+		device_destroy(fb_class, MKDEV(FB_MAJOR, i));
+		fb_info->dev = NULL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(unlink_framebuffer);
+
 void remove_conflicting_framebuffers(struct apertures_struct *a,
 				     const char *name, bool primary)
 {
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index a19773149bd..a40c05ebbdc 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1739,7 +1739,7 @@ static void dlfb_usb_disconnect(struct usb_interface *interface)
 	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
 		device_remove_file(info->dev, &fb_device_attrs[i]);
 	device_remove_bin_file(info->dev, &edid_attr);
-
+	unlink_framebuffer(info);
 	usb_set_intfdata(interface, NULL);
 
 	/* if clients still have us open, will be freed on last close */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c18122f4054..a395b8c7699 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1003,6 +1003,7 @@ extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
 /* drivers/video/fbmem.c */
 extern int register_framebuffer(struct fb_info *fb_info);
 extern int unregister_framebuffer(struct fb_info *fb_info);
+extern int unlink_framebuffer(struct fb_info *fb_info);
 extern void remove_conflicting_framebuffers(struct apertures_struct *a,
 				const char *name, bool primary);
 extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
-- 
cgit v1.2.3-70-g09d2


From 4bc25af79ec54b79266148f8c1b84bb1e7ff2621 Mon Sep 17 00:00:00 2001
From: Andrew Jones <drjones@redhat.com>
Date: Fri, 6 Jan 2012 10:43:09 +0100
Subject: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps

PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but
they don't use the xen frame buffer frontend. For this case it doesn't
make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on
XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e.
if you're using xenfb, then you'll want xenkbd. Switch the dependencies.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 drivers/input/misc/Kconfig | 2 +-
 drivers/video/Kconfig      | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7b46781c30c..8f675ae2091 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -558,7 +558,7 @@ config INPUT_CMA3000_I2C
 
 config INPUT_XEN_KBDDEV_FRONTEND
 	tristate "Xen virtual keyboard and mouse support"
-	depends on XEN_FBDEV_FRONTEND
+	depends on XEN
 	default y
 	select XEN_XENBUS_FRONTEND
 	help
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d83e967e4e1..269b2991956 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2269,6 +2269,7 @@ config XEN_FBDEV_FRONTEND
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
 	select FB_DEFERRED_IO
+	select INPUT_XEN_KBDDEV_FRONTEND
 	select XEN_XENBUS_FRONTEND
 	default y
 	help
-- 
cgit v1.2.3-70-g09d2


From 084e104bd8e03e1f8e10ae73944de497f4f427b5 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Tue, 13 Mar 2012 14:13:04 +0100
Subject: fbdev: da8xx:: fix reporting of the display timing info

Timing info is not properly reported by the driver, e.g.:

$ fbset -i
mode "480x272-35"
    # D: 7.895 MHz, H: 12.165 kHz, V: 35.158 Hz
    geometry 480 272 480 544 16
    timings 126666 64 64 32 32 41 10

According to the timing values defined for LK043T1DG01 display
it should be reported as:

mode "480x272-53"
    # D: 7.895 MHz, H: 15.038 kHz, V: 52.579 Hz
    geometry 480 272 480 544 16
    timings 126666 2 2 2 2 41 10

Initialize additional fb_var_screeninfo fields so fix this problem.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/da8xx-fb.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index dd80386b0ed..8f7e0514370 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1231,6 +1231,10 @@ static int __devinit fb_probe(struct platform_device *device)
 
 	da8xx_fb_var.hsync_len = lcdc_info->hsw;
 	da8xx_fb_var.vsync_len = lcdc_info->vsw;
+	da8xx_fb_var.right_margin = lcdc_info->hfp;
+	da8xx_fb_var.left_margin  = lcdc_info->hbp;
+	da8xx_fb_var.lower_margin = lcdc_info->vfp;
+	da8xx_fb_var.upper_margin = lcdc_info->vbp;
 	da8xx_fb_var.pixclock = da8xxfb_pixel_clk_period(par);
 
 	/* Initialize fbinfo */
-- 
cgit v1.2.3-70-g09d2


From f413070e3f0bccb40ca939b90699347daf815607 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Tue, 13 Mar 2012 14:13:57 +0100
Subject: fbdev: da8xx: add support for SP10Q010 display

Add timing data for Hitachi SP10Q010 display and allow configuration
of the 4bpp palette. For 4bpp framebuffer enable reversed order of
pixels in a byte. This requires defining FB_CFB_REV_PIXELS_IN_BYTE
and additionally setting var.nonstd to the value FB_NONSTD_REV_PIX_IN_B.
Note that it is not enough to set da8xx_fb_var.nonstd to this value
statically, since FBIOPUT_VSCREENINFO ioctl might pass var struct with
.nonstd field set to zero or another value. Therefore this setting must
be adjusted in fb_check_var() according to the requested bpp value.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Manjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/Kconfig    |  1 +
 drivers/video/da8xx-fb.c | 38 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a4359424318..005347a35b6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2246,6 +2246,7 @@ config FB_DA8XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_CFB_REV_PIXELS_IN_BYTE
 	---help---
 	  This is the frame buffer device driver for the TI LCD controller
 	  found on DA8xx/OMAP-L1xx SoCs.
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8f7e0514370..47118c75a4c 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -239,6 +239,20 @@ static struct da8xx_panel known_lcd_panels[] = {
 		.pxl_clk = 7833600,
 		.invert_pxl_clk = 0,
 	},
+	[2] = {
+		/* Hitachi SP10Q010 */
+		.name = "SP10Q010",
+		.width = 320,
+		.height = 240,
+		.hfp = 10,
+		.hbp = 10,
+		.hsw = 10,
+		.vfp = 10,
+		.vbp = 10,
+		.vsw = 10,
+		.pxl_clk = 7833600,
+		.invert_pxl_clk = 0,
+	},
 };
 
 /* Enable the Raster Engine of the LCD Controller */
@@ -547,7 +561,26 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
 		return 1;
 
-	if (info->var.bits_per_pixel == 8) {
+	if (info->var.bits_per_pixel == 4) {
+		if (regno > 15)
+			return 1;
+
+		if (info->var.grayscale) {
+			pal = regno;
+		} else {
+			red >>= 4;
+			green >>= 8;
+			blue >>= 12;
+
+			pal = (red & 0x0f00);
+			pal |= (green & 0x00f0);
+			pal |= (blue & 0x000f);
+		}
+		if (regno == 0)
+			pal |= 0x2000;
+		palette[regno] = pal;
+
+	} else if (info->var.bits_per_pixel == 8) {
 		red >>= 4;
 		green >>= 8;
 		blue >>= 12;
@@ -802,6 +835,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 8;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = 0;
 		break;
 	case 4:
 		var->red.offset = 0;
@@ -812,6 +846,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 4;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = FB_NONSTD_REV_PIX_IN_B;
 		break;
 	case 16:		/* RGB 565 */
 		var->red.offset = 11;
@@ -822,6 +857,7 @@ static int fb_check_var(struct fb_var_screeninfo *var,
 		var->blue.length = 5;
 		var->transp.offset = 0;
 		var->transp.length = 0;
+		var->nonstd = 0;
 		break;
 	default:
 		err = -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From f363afc168e772a6034ea97b7b213a1b47b8f376 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Tue, 20 Mar 2012 18:27:08 -0700
Subject: fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDC

MERAM can be used for other IP blocks as well in the future.
It doesn't necessarily mean that the MERAM driver depends on the LCDC.
This patch corrects dependency.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/Kconfig | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 005347a35b6..86d9c8c884a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2013,19 +2013,6 @@ config FB_SH_MOBILE_HDMI
 	---help---
 	  Driver for the on-chip SH-Mobile HDMI controller.
 
-config FB_SH_MOBILE_MERAM
-	tristate "SuperH Mobile MERAM read ahead support for LCDC"
-	depends on FB_SH_MOBILE_LCDC
-	select GENERIC_ALLOCATOR
-	default y
-	---help---
-	  Enable MERAM support for the SH-Mobile LCD controller.
-
-	  This will allow for caching of the framebuffer to provide more
-	  reliable access under heavy main memory bus traffic situations.
-	  Up to 4 memory channels can be configured, allowing 4 RGB or
-	  2 YCbCr framebuffers to be configured.
-
 config FB_TMIO
 	tristate "Toshiba Mobile IO FrameBuffer support"
 	depends on FB && MFD_CORE
@@ -2436,4 +2423,16 @@ if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
 endif
 
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support"
+	depends on (SUPERH || ARCH_SHMOBILE)
+	select GENERIC_ALLOCATOR
+	---help---
+	  Enable MERAM support for the SuperH controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
 endmenu
-- 
cgit v1.2.3-70-g09d2


From 8f9c60f2e29717155227f225b557d3f1fda442bd Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Tue, 20 Mar 2012 18:34:10 -0700
Subject: fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info

sh_mipi uses some clocks, but the method of setup depends on CPU.

Current SuperH (like sh73a0) can control all of these clocks
by CPG (Clock Pulse Generator).
It means we can control it by clock framework only.
But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS,
and only sh7372 has PHYCTRL::PLLDS.

But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was
overwrote since the callback timing of clock setting was changed
by c2658b70f06108361aa5024798f9c1bf47c73374
(fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()).
To solve this issue, this patch adds extra .phyctrl.

This patch adds detail explanation for unclear mipi settings
and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6).

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 12 +++++++++---
 drivers/video/sh_mipi_dsi.c           |  2 +-
 include/video/sh_mipi_dsi.h           |  1 +
 3 files changed, 11 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 82483d5f200..581ec66eef9 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -486,20 +486,25 @@ static struct platform_device keysc_device = {
 };
 
 /* MIPI-DSI */
-#define PHYCTRL		0x0070
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
 	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
-	void __iomem *phy =  base + PHYCTRL;
 
 	if (IS_ERR(pck))
 		return PTR_ERR(pck);
 
 	if (enable) {
+		/*
+		 * DSIPCLK	= 24MHz
+		 * D-PHY	= DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
+		 * HsByteCLK	= D-PHY/8 = 39MHz
+		 *
+		 *  X * Y * FPS =
+		 * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
+		 */
 		clk_set_rate(pck, clk_round_rate(pck, 24000000));
-		iowrite32(ioread32(phy) | (0xb << 8), phy);
 		clk_enable(pck);
 	} else {
 		clk_disable(pck);
@@ -530,6 +535,7 @@ static struct sh_mipi_dsi_info mipidsi0_info = {
 	.lcd_chan	= &lcdc_info.ch[0],
 	.lane		= 2,
 	.vsynw_offset	= 17,
+	.phyctrl	= 0x6 << 8,
 	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
 			  SH_MIPI_DSI_HSbyteCLK,
 	.set_dot_clock	= sh_mipi_set_dot_clock,
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 42ad0f707e8..4c6b8448856 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -273,7 +273,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	iowrite32(0x00000001, base + PHYCTRL);
 	udelay(200);
 	/* Deassert resets, power on */
-	iowrite32(0x03070001, base + PHYCTRL);
+	iowrite32(0x03070001 | pdata->phyctrl, base + PHYCTRL);
 
 	/*
 	 * Default = ULPS enable |
diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
index 434d56b4a1a..06c67fbc4ee 100644
--- a/include/video/sh_mipi_dsi.h
+++ b/include/video/sh_mipi_dsi.h
@@ -51,6 +51,7 @@ struct sh_mipi_dsi_info {
 	int				lane;
 	unsigned long			flags;
 	u32				clksrc;
+	u32				phyctrl; /* for extra setting */
 	unsigned int			vsynw_offset;
 	int	(*set_dot_clock)(struct platform_device *pdev,
 				 void __iomem *base,
-- 
cgit v1.2.3-70-g09d2


From cfc4bcfe84e14b858dc6a1ab6bbf34d69edabc27 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 15 Mar 2012 10:14:49 +0100
Subject: fbdev: bfin_adv7393fb: Drop needless include

Kernel drivers don't need <linux/i2c-dev.h>.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/bfin_adv7393fb.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
index c9928142921..1a268a29447 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/bfin_adv7393fb.c
@@ -36,9 +36,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
-
 #include <linux/i2c.h>
-#include <linux/i2c-dev.h>
 
 #include "bfin_adv7393fb.h"
 
-- 
cgit v1.2.3-70-g09d2


From b622f1b538f91ab320838656fc0b31d11a67c5fc Mon Sep 17 00:00:00 2001
From: Philipp Zabel <pzabel@gmx.de>
Date: Thu, 15 Mar 2012 19:12:00 +0100
Subject: video: pxafb: add clk_prepare/clk_unprepare calls

This patch adds clk_prepare/clk_unprepare calls to the pxafb
driver by using the helper functions clk_prepare_enable and
clk_disable_unprepare.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/pxafb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index c176561a222..3f902557690 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1435,7 +1435,7 @@ static void pxafb_enable_controller(struct pxafb_info *fbi)
 	pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
 	/* enable LCD controller clock */
-	clk_enable(fbi->clk);
+	clk_prepare_enable(fbi->clk);
 
 	if (fbi->lccr0 & LCCR0_LCDT)
 		return;
@@ -1475,7 +1475,7 @@ static void pxafb_disable_controller(struct pxafb_info *fbi)
 	wait_for_completion_timeout(&fbi->disable_done, 200 * HZ / 1000);
 
 	/* disable LCD controller clock */
-	clk_disable(fbi->clk);
+	clk_disable_unprepare(fbi->clk);
 }
 
 /*
-- 
cgit v1.2.3-70-g09d2


From dc7e57fa80ec5231e33ee2f51f6211c9fb84b9e3 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 19 Mar 2012 15:05:02 +0200
Subject: OMAPDSS: register dss drivers in module init

We do the dss driver registration in a rather strange way: we have the
higher level omapdss driver, and we use that driver's probe function to
register the drivers for the rest of the dss devices.

There doesn't seem to be any reason for that, and additionally the
soon-to-be-merged patch "ARM: OMAP: omap_device: remove
omap_device_parent" will break omapdss initialization with the current
registration model.

This patch changes the registration for all drivers to happen at the
same place, in the init of the module.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/omap2/dss/core.c | 135 +++++++++++++++++++++++------------------
 1 file changed, 77 insertions(+), 58 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 8613f86fb56..e8a120771ac 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -183,42 +183,6 @@ static int omap_dss_probe(struct platform_device *pdev)
 	dss_init_overlay_managers(pdev);
 	dss_init_overlays(pdev);
 
-	r = dss_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize DSS platform driver\n");
-		goto err_dss;
-	}
-
-	r = dispc_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize dispc platform driver\n");
-		goto err_dispc;
-	}
-
-	r = rfbi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize rfbi platform driver\n");
-		goto err_rfbi;
-	}
-
-	r = venc_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize venc platform driver\n");
-		goto err_venc;
-	}
-
-	r = dsi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize DSI platform driver\n");
-		goto err_dsi;
-	}
-
-	r = hdmi_init_platform_driver();
-	if (r) {
-		DSSERR("Failed to initialize hdmi\n");
-		goto err_hdmi;
-	}
-
 	r = dss_initialize_debugfs();
 	if (r)
 		goto err_debugfs;
@@ -246,18 +210,6 @@ static int omap_dss_probe(struct platform_device *pdev)
 err_register:
 	dss_uninitialize_debugfs();
 err_debugfs:
-	hdmi_uninit_platform_driver();
-err_hdmi:
-	dsi_uninit_platform_driver();
-err_dsi:
-	venc_uninit_platform_driver();
-err_venc:
-	dispc_uninit_platform_driver();
-err_dispc:
-	rfbi_uninit_platform_driver();
-err_rfbi:
-	dss_uninit_platform_driver();
-err_dss:
 
 	return r;
 }
@@ -269,13 +221,6 @@ static int omap_dss_remove(struct platform_device *pdev)
 
 	dss_uninitialize_debugfs();
 
-	hdmi_uninit_platform_driver();
-	dsi_uninit_platform_driver();
-	venc_uninit_platform_driver();
-	rfbi_uninit_platform_driver();
-	dispc_uninit_platform_driver();
-	dss_uninit_platform_driver();
-
 	dss_uninit_overlays(pdev);
 	dss_uninit_overlay_managers(pdev);
 
@@ -525,6 +470,80 @@ static int omap_dss_bus_register(void)
 
 /* INIT */
 
+static int __init omap_dss_register_drivers(void)
+{
+	int r;
+
+	r = platform_driver_register(&omap_dss_driver);
+	if (r)
+		return r;
+
+	r = dss_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize DSS platform driver\n");
+		goto err_dss;
+	}
+
+	r = dispc_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize dispc platform driver\n");
+		goto err_dispc;
+	}
+
+	r = rfbi_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize rfbi platform driver\n");
+		goto err_rfbi;
+	}
+
+	r = venc_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize venc platform driver\n");
+		goto err_venc;
+	}
+
+	r = dsi_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize DSI platform driver\n");
+		goto err_dsi;
+	}
+
+	r = hdmi_init_platform_driver();
+	if (r) {
+		DSSERR("Failed to initialize hdmi\n");
+		goto err_hdmi;
+	}
+
+	return 0;
+
+err_hdmi:
+	dsi_uninit_platform_driver();
+err_dsi:
+	venc_uninit_platform_driver();
+err_venc:
+	rfbi_uninit_platform_driver();
+err_rfbi:
+	dispc_uninit_platform_driver();
+err_dispc:
+	dss_uninit_platform_driver();
+err_dss:
+	platform_driver_unregister(&omap_dss_driver);
+
+	return r;
+}
+
+static void __exit omap_dss_unregister_drivers(void)
+{
+	hdmi_uninit_platform_driver();
+	dsi_uninit_platform_driver();
+	venc_uninit_platform_driver();
+	rfbi_uninit_platform_driver();
+	dispc_uninit_platform_driver();
+	dss_uninit_platform_driver();
+
+	platform_driver_unregister(&omap_dss_driver);
+}
+
 #ifdef CONFIG_OMAP2_DSS_MODULE
 static void omap_dss_bus_unregister(void)
 {
@@ -541,7 +560,7 @@ static int __init omap_dss_init(void)
 	if (r)
 		return r;
 
-	r = platform_driver_register(&omap_dss_driver);
+	r = omap_dss_register_drivers();
 	if (r) {
 		omap_dss_bus_unregister();
 		return r;
@@ -562,7 +581,7 @@ static void __exit omap_dss_exit(void)
 		core.vdds_sdi_reg = NULL;
 	}
 
-	platform_driver_unregister(&omap_dss_driver);
+	omap_dss_unregister_drivers();
 
 	omap_dss_bus_unregister();
 }
@@ -577,7 +596,7 @@ static int __init omap_dss_init(void)
 
 static int __init omap_dss_init2(void)
 {
-	return platform_driver_register(&omap_dss_driver);
+	return omap_dss_register_drivers();
 }
 
 core_initcall(omap_dss_init);
-- 
cgit v1.2.3-70-g09d2


From 6bff98b455cf3e666fd0e3d0d908eba874de0eee Mon Sep 17 00:00:00 2001
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Date: Wed, 21 Mar 2012 13:22:01 +0000
Subject: Revert "video:uvesafb: Fix oops that uvesafb try to execute
 NX-protected page"

This reverts commit ec0d22e4d563e7cce9f6678e2000900755c2989d.

This patch requires exporting 'pcibios_enabled' to avoid breaking
modular uvesafb builds. As this gets some opposition by Alan Cox it
needs more discussion, revert the patch for now.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/uvesafb.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 1f882ed6ba0..9db3de3a841 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -23,7 +23,6 @@
 #include <video/uvesafb.h>
 #ifdef CONFIG_X86
 #include <video/vga.h>
-#include <linux/pci.h>
 #endif
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
@@ -816,15 +815,8 @@ static int __devinit uvesafb_vbe_init(struct fb_info *info)
 	par->pmi_setpal = pmi_setpal;
 	par->ypan = ypan;
 
-	if (par->pmi_setpal || par->ypan) {
-		if (pcibios_enabled) {
-			uvesafb_vbe_getpmi(task, par);
-		} else {
-			par->pmi_setpal = par->ypan = 0;
-			printk(KERN_WARNING "uvesafb: PCI BIOS area is NX."
-				"Can't use protected mode interface\n");
-		}
-	}
+	if (par->pmi_setpal || par->ypan)
+		uvesafb_vbe_getpmi(task, par);
 #else
 	/* The protected mode interface is not available on non-x86. */
 	par->pmi_setpal = par->ypan = 0;
-- 
cgit v1.2.3-70-g09d2


From 16052827d98fbc13c31ebad560af4bd53e2b4dd5 Mon Sep 17 00:00:00 2001
From: Alexandre Bounine <alexandre.bounine@idt.com>
Date: Thu, 8 Mar 2012 16:11:18 -0500
Subject: dmaengine/dma_slave: introduce inline wrappers

Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic()
interfaces to hide new parameter from current users of affected interfaces.
Convert current users to use new wrappers instead of direct calls.
Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269].

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
---
 arch/arm/plat-nomadik/include/plat/ste_dma40.h |  3 +--
 arch/arm/plat-samsung/dma-ops.c                |  4 ++--
 drivers/media/video/mx3_camera.c               |  2 +-
 drivers/media/video/timblogiw.c                |  2 +-
 drivers/mmc/host/atmel-mci.c                   |  2 +-
 drivers/mmc/host/mmci.c                        |  2 +-
 drivers/mmc/host/mxcmmc.c                      |  2 +-
 drivers/mmc/host/mxs-mmc.c                     |  2 +-
 drivers/mmc/host/sh_mmcif.c                    |  4 ++--
 drivers/mmc/host/tmio_mmc_dma.c                |  4 ++--
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c          | 25 +++++++++++--------------
 drivers/net/ethernet/micrel/ks8842.c           |  4 ++--
 drivers/spi/spi-dw-mid.c                       |  4 ++--
 drivers/spi/spi-ep93xx.c                       |  4 ++--
 drivers/spi/spi-pl022.c                        |  4 ++--
 drivers/spi/spi-topcliff-pch.c                 |  4 ++--
 drivers/tty/serial/amba-pl011.c                |  6 ++----
 drivers/tty/serial/pch_uart.c                  |  4 ++--
 drivers/tty/serial/sh-sci.c                    |  4 ++--
 drivers/usb/musb/ux500_dma.c                   |  3 +--
 drivers/usb/renesas_usbhs/fifo.c               |  5 ++---
 drivers/video/mx3fb.c                          |  4 ++--
 include/linux/dmaengine.h                      | 16 ++++++++++++++++
 sound/soc/ep93xx/ep93xx-pcm.c                  |  3 +--
 sound/soc/imx/imx-pcm-dma-mx2.c                |  2 +-
 sound/soc/mxs/mxs-pcm.c                        |  2 +-
 sound/soc/sh/siu_pcm.c                         |  4 ++--
 sound/soc/txx9/txx9aclc.c                      |  2 +-
 28 files changed, 67 insertions(+), 60 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index fd0ee84c45d..9ff93b06568 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -200,8 +200,7 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 	sg.dma_address = addr;
 	sg.length = size;
 
-	return chan->device->device_prep_slave_sg(chan, &sg, 1,
-						  direction, flags);
+	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
 }
 
 #else
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 0747c77a2fd..a6ef3961134 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -79,11 +79,11 @@ static int samsung_dmadev_prepare(unsigned ch,
 			    info->len, offset_in_page(info->buf));
 		sg_dma_address(&sg) = info->buf;
 
-		desc = chan->device->device_prep_slave_sg(chan,
+		desc = dmaengine_prep_slave_sg(chan,
 			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
 		break;
 	case DMA_CYCLIC:
-		desc = chan->device->device_prep_dma_cyclic(chan,
+		desc = dmaengine_prep_dma_cyclic(chan,
 			info->buf, info->len, info->period, info->direction);
 		break;
 	default:
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 74522773e93..93c35ef5f0a 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -286,7 +286,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
 		sg_dma_address(sg)	= vb2_dma_contig_plane_dma_addr(vb, 0);
 		sg_dma_len(sg)		= new_size;
 
-		txd = ichan->dma_chan.device->device_prep_slave_sg(
+		txd = dmaengine_prep_slave_sg(
 			&ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM,
 			DMA_PREP_INTERRUPT);
 		if (!txd)
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index 4ed1c7c28ae..02194c056b0 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -564,7 +564,7 @@ static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 
 	spin_unlock_irq(&fh->queue_lock);
 
-	desc = fh->chan->device->device_prep_slave_sg(fh->chan,
+	desc = dmaengine_prep_slave_sg(fh->chan,
 		buf->sg, sg_elems, DMA_DEV_TO_MEM,
 		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
 	if (!desc) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 3ba865ddebc..492854b09d8 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -875,7 +875,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
 			data->sg_len, direction);
 
 	dmaengine_slave_config(chan, &host->dma_conf);
-	desc = chan->device->device_prep_slave_sg(chan,
+	desc = dmaengine_prep_slave_sg(chan,
 			data->sg, sglen, slave_dirn,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a09c06ba046..c55f9663eb1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -413,7 +413,7 @@ static int mmci_dma_prep_data(struct mmci_host *host, struct mmc_data *data,
 		return -EINVAL;
 
 	dmaengine_slave_config(chan, &conf);
-	desc = device->device_prep_slave_sg(chan, data->sg, nr_sg,
+	desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg,
 					    conf.direction, DMA_CTRL_ACK);
 	if (!desc)
 		goto unmap_exit;
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 68b69a91e5e..b2058b43232 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -255,7 +255,7 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
 	if (nents != data->sg_len)
 		return -EINVAL;
 
-	host->desc = host->dma->device->device_prep_slave_sg(host->dma,
+	host->desc = dmaengine_prep_slave_sg(host->dma,
 		data->sg, data->sg_len, slave_dirn,
 		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 382c835d217..65f36cf2ff3 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -324,7 +324,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
 		sg_len = SSP_PIO_NUM;
 	}
 
-	desc = host->dmach->device->device_prep_slave_sg(host->dmach,
+	desc = dmaengine_prep_slave_sg(host->dmach,
 				sgl, sg_len, host->slave_dirn, append);
 	if (desc) {
 		desc->callback = mxs_mmc_dma_irq_callback;
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index f5d8b53be33..3d00f1aab87 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -285,7 +285,7 @@ static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host)
 			 DMA_FROM_DEVICE);
 	if (ret > 0) {
 		host->dma_active = true;
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+		desc = dmaengine_prep_slave_sg(chan, sg, ret,
 			DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	}
 
@@ -334,7 +334,7 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host)
 			 DMA_TO_DEVICE);
 	if (ret > 0) {
 		host->dma_active = true;
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+		desc = dmaengine_prep_slave_sg(chan, sg, ret,
 			DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	}
 
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 7a6e6cc8f8b..def9c54f73f 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -76,7 +76,7 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
 
 	ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE);
 	if (ret > 0)
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+		desc = dmaengine_prep_slave_sg(chan, sg, ret,
 			DMA_DEV_TO_MEM, DMA_CTRL_ACK);
 
 	if (desc) {
@@ -157,7 +157,7 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
 
 	ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE);
 	if (ret > 0)
-		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+		desc = dmaengine_prep_slave_sg(chan, sg, ret,
 			DMA_MEM_TO_DEV, DMA_CTRL_ACK);
 
 	if (desc) {
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 7f680420bfa..2a200ba0bd1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -825,7 +825,7 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 		| BM_GPMI_CTRL0_ADDRESS_INCREMENT
 		| BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
 	pio[1] = pio[2] = 0;
-	desc = channel->device->device_prep_slave_sg(channel,
+	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
@@ -838,8 +838,7 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 
 	sg_init_one(sgl, this->cmd_buffer, this->command_length);
 	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
-	desc = channel->device->device_prep_slave_sg(channel,
-					sgl, 1, DMA_MEM_TO_DEV, 1);
+	desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -870,8 +869,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 		| BF_GPMI_CTRL0_ADDRESS(address)
 		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
 	pio[1] = 0;
-	desc = channel->device->device_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
+	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 1 error\n");
@@ -880,7 +878,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 
 	/* [2] send DMA request */
 	prepare_data_dma(this, DMA_TO_DEVICE);
-	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
+	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
 						1, DMA_MEM_TO_DEV, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
@@ -906,7 +904,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 		| BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
 		| BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
 	pio[1] = 0;
-	desc = channel->device->device_prep_slave_sg(channel,
+	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
@@ -916,8 +914,8 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 
 	/* [2] : send DMA request */
 	prepare_data_dma(this, DMA_FROM_DEVICE);
-	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_DEV_TO_MEM, 1);
+	desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
+					1, DMA_DEV_TO_MEM, 1);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -962,8 +960,7 @@ int gpmi_send_page(struct gpmi_nand_data *this,
 	pio[4] = payload;
 	pio[5] = auxiliary;
 
-	desc = channel->device->device_prep_slave_sg(channel,
-					(struct scatterlist *)pio,
+	desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
 	if (!desc) {
 		pr_err("step 2 error\n");
@@ -997,7 +994,7 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_ADDRESS(address)
 		| BF_GPMI_CTRL0_XFER_COUNT(0);
 	pio[1] = 0;
-	desc = channel->device->device_prep_slave_sg(channel,
+	desc = dmaengine_prep_slave_sg(channel,
 				(struct scatterlist *)pio, 2,
 				DMA_TRANS_NONE, 0);
 	if (!desc) {
@@ -1026,7 +1023,7 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 	pio[3] = geo->page_size;
 	pio[4] = payload;
 	pio[5] = auxiliary;
-	desc = channel->device->device_prep_slave_sg(channel,
+	desc = dmaengine_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
 					ARRAY_SIZE(pio), DMA_TRANS_NONE, 1);
 	if (!desc) {
@@ -1045,7 +1042,7 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_ADDRESS(address)
 		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
 	pio[1] = 0;
-	desc = channel->device->device_prep_slave_sg(channel,
+	desc = dmaengine_prep_slave_sg(channel,
 				(struct scatterlist *)pio, 2,
 				DMA_TRANS_NONE, 1);
 	if (!desc) {
diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index 0a85690a132..554fef3f013 100644
--- a/drivers/net/ethernet/micrel/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
@@ -458,7 +458,7 @@ static int ks8842_tx_frame_dma(struct sk_buff *skb, struct net_device *netdev)
 	if (sg_dma_len(&ctl->sg) % 4)
 		sg_dma_len(&ctl->sg) += 4 - sg_dma_len(&ctl->sg) % 4;
 
-	ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
+	ctl->adesc = dmaengine_prep_slave_sg(ctl->chan,
 		&ctl->sg, 1, DMA_MEM_TO_DEV,
 		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
 	if (!ctl->adesc)
@@ -570,7 +570,7 @@ static int __ks8842_start_new_rx_dma(struct net_device *netdev)
 
 		sg_dma_len(sg) = DMA_BUFFER_SIZE;
 
-		ctl->adesc = ctl->chan->device->device_prep_slave_sg(ctl->chan,
+		ctl->adesc = dmaengine_prep_slave_sg(ctl->chan,
 			sg, 1, DMA_DEV_TO_MEM,
 			DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
 
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 04d6c1b3138..b9f0192758d 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -146,7 +146,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	dws->tx_sgl.dma_address = dws->tx_dma;
 	dws->tx_sgl.length = dws->len;
 
-	txdesc = txchan->device->device_prep_slave_sg(txchan,
+	txdesc = dmaengine_prep_slave_sg(txchan,
 				&dws->tx_sgl,
 				1,
 				DMA_MEM_TO_DEV,
@@ -169,7 +169,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	dws->rx_sgl.dma_address = dws->rx_dma;
 	dws->rx_sgl.length = dws->len;
 
-	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+	rxdesc = dmaengine_prep_slave_sg(rxchan,
 				&dws->rx_sgl,
 				1,
 				DMA_DEV_TO_MEM,
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index d46e55c720b..6db2887852d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -633,8 +633,8 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 	if (!nents)
 		return ERR_PTR(-ENOMEM);
 
-	txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents,
-						 slave_dirn, DMA_CTRL_ACK);
+	txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents,
+					slave_dirn, DMA_CTRL_ACK);
 	if (!txd) {
 		dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
 		return ERR_PTR(-ENOMEM);
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 1dc667f8a30..a209f3b7b05 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1040,7 +1040,7 @@ static int configure_dma(struct pl022 *pl022)
 		goto err_tx_sgmap;
 
 	/* Send both scatterlists */
-	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+	rxdesc = dmaengine_prep_slave_sg(rxchan,
 				      pl022->sgt_rx.sgl,
 				      rx_sglen,
 				      DMA_DEV_TO_MEM,
@@ -1048,7 +1048,7 @@ static int configure_dma(struct pl022 *pl022)
 	if (!rxdesc)
 		goto err_rxdesc;
 
-	txdesc = txchan->device->device_prep_slave_sg(txchan,
+	txdesc = dmaengine_prep_slave_sg(txchan,
 				      pl022->sgt_tx.sgl,
 				      tx_sglen,
 				      DMA_MEM_TO_DEV,
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 2a6429d8c36..ea4c8d57667 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -1078,7 +1078,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 		sg_dma_address(sg) = dma->rx_buf_dma + sg->offset;
 	}
 	sg = dma->sg_rx_p;
-	desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg,
+	desc_rx = dmaengine_prep_slave_sg(dma->chan_rx, sg,
 					num, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_rx) {
@@ -1123,7 +1123,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 		sg_dma_address(sg) = dma->tx_buf_dma + sg->offset;
 	}
 	sg = dma->sg_tx_p;
-	desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx,
+	desc_tx = dmaengine_prep_slave_sg(dma->chan_tx,
 					sg, num, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_tx) {
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index db7f88a1bde..f9dcb5379b9 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -483,7 +483,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 		return -EBUSY;
 	}
 
-	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
+	desc = dmaengine_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
@@ -666,7 +666,6 @@ static void pl011_dma_rx_callback(void *data);
 static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
 {
 	struct dma_chan *rxchan = uap->dmarx.chan;
-	struct dma_device *dma_dev;
 	struct pl011_dmarx_data *dmarx = &uap->dmarx;
 	struct dma_async_tx_descriptor *desc;
 	struct pl011_sgbuf *sgbuf;
@@ -677,8 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
 	/* Start the RX DMA job */
 	sgbuf = uap->dmarx.use_buf_b ?
 		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
-	dma_dev = rxchan->device;
-	desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1,
+	desc = dmaengine_prep_slave_sg(rxchan, &sgbuf->sg, 1,
 					DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	/*
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 17ae65762d1..61743bdc439 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -763,7 +763,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 
 	sg_dma_address(sg) = priv->rx_buf_dma;
 
-	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
+	desc = dmaengine_prep_slave_sg(priv->chan_rx,
 			sg, 1, DMA_DEV_TO_MEM,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
@@ -922,7 +922,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 			sg_dma_len(sg) = size;
 	}
 
-	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
+	desc = dmaengine_prep_slave_sg(priv->chan_tx,
 					priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 75085795528..872557f89cc 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1338,7 +1338,7 @@ static void sci_submit_rx(struct sci_port *s)
 		struct scatterlist *sg = &s->sg_rx[i];
 		struct dma_async_tx_descriptor *desc;
 
-		desc = chan->device->device_prep_slave_sg(chan,
+		desc = dmaengine_prep_slave_sg(chan,
 			sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
 
 		if (desc) {
@@ -1453,7 +1453,7 @@ static void work_fn_tx(struct work_struct *work)
 
 	BUG_ON(!sg_dma_len(sg));
 
-	desc = chan->device->device_prep_slave_sg(chan,
+	desc = dmaengine_prep_slave_sg(chan,
 			sg, s->sg_len_tx, DMA_MEM_TO_DEV,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 2a36bf37d7a..d05c7fbbb70 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -120,8 +120,7 @@ static bool ux500_configure_channel(struct dma_channel *channel,
 	dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG,
 					     (unsigned long) &slave_conf);
 
-	dma_desc = dma_chan->device->
-			device_prep_slave_sg(dma_chan, &sg, 1, direction,
+	dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!dma_desc)
 		return false;
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 72339bd6fca..7b4309339f3 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -783,9 +783,8 @@ static void usbhsf_dma_prepare_tasklet(unsigned long data)
 	sg_dma_address(&sg) = pkt->dma + pkt->actual;
 	sg_dma_len(&sg) = pkt->trans;
 
-	desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir,
-						  DMA_PREP_INTERRUPT |
-						  DMA_CTRL_ACK);
+	desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
 		return;
 
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 727a5149d81..eec0d7b748e 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -337,7 +337,7 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
 
 	/* This enables the channel */
 	if (mx3_fbi->cookie < 0) {
-		mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+		mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan,
 		      &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 		if (!mx3_fbi->txd) {
 			dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
@@ -1091,7 +1091,7 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
 	if (mx3_fbi->txd)
 		async_tx_ack(mx3_fbi->txd);
 
-	txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+	txd = dmaengine_prep_slave_sg(dma_chan, sg +
 		mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 	if (!txd) {
 		dev_err(fbi->device,
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 715babf4bff..03d68b7e570 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -622,6 +622,22 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
 	return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
 }
 
+static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
+	struct dma_chan *chan, struct scatterlist *sgl,	unsigned int sg_len,
+	enum dma_transfer_direction dir, unsigned long flags)
+{
+	return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
+						  dir, flags);
+}
+
+static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
+		size_t period_len, enum dma_transfer_direction dir)
+{
+	return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
+							period_len, dir);
+}
+
 static inline int dmaengine_terminate_all(struct dma_chan *chan)
 {
 	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c
index de839044987..50593e50ad5 100644
--- a/sound/soc/ep93xx/ep93xx-pcm.c
+++ b/sound/soc/ep93xx/ep93xx-pcm.c
@@ -142,11 +142,10 @@ static int ep93xx_pcm_dma_submit(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct ep93xx_runtime_data *rtd = runtime->private_data;
 	struct dma_chan *chan = rtd->dma_chan;
-	struct dma_device *dma_dev = chan->device;
 	struct dma_async_tx_descriptor *desc;
 
 	rtd->pointer_bytes = 0;
-	desc = dma_dev->device_prep_dma_cyclic(chan, runtime->dma_addr,
+	desc = dmaengine_prep_dma_cyclic(chan, runtime->dma_addr,
 					       rtd->period_bytes * rtd->periods,
 					       rtd->period_bytes,
 					       rtd->dma_data.direction);
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 52b0dedbf99..af46b4e2b43 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -160,7 +160,7 @@ static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
 
 	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
 
-	iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+	iprtd->desc = dmaengine_prep_dma_cyclic(chan, dma_addr,
 			iprtd->period_bytes * iprtd->periods,
 			iprtd->period_bytes,
 			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c
index 105f42a394d..661b678d08a 100644
--- a/sound/soc/mxs/mxs-pcm.c
+++ b/sound/soc/mxs/mxs-pcm.c
@@ -132,7 +132,7 @@ static int snd_mxs_pcm_hw_params(struct snd_pcm_substream *substream,
 
 	iprtd->buf = substream->dma_buffer.area;
 
-	iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+	iprtd->desc = dmaengine_prep_dma_cyclic(chan, dma_addr,
 			iprtd->period_bytes * iprtd->periods,
 			iprtd->period_bytes,
 			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
index 0193e595d41..5cfcc655e95 100644
--- a/sound/soc/sh/siu_pcm.c
+++ b/sound/soc/sh/siu_pcm.c
@@ -130,7 +130,7 @@ static int siu_pcm_wr_set(struct siu_port *port_info,
 	sg_dma_len(&sg) = size;
 	sg_dma_address(&sg) = buff;
 
-	desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan,
+	desc = dmaengine_prep_slave_sg(siu_stream->chan,
 		&sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dev_err(dev, "Failed to allocate a dma descriptor\n");
@@ -180,7 +180,7 @@ static int siu_pcm_rd_set(struct siu_port *port_info,
 	sg_dma_len(&sg) = size;
 	sg_dma_address(&sg) = buff;
 
-	desc = siu_stream->chan->device->device_prep_slave_sg(siu_stream->chan,
+	desc = dmaengine_prep_slave_sg(siu_stream->chan,
 		&sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dev_err(dev, "Failed to allocate dma descriptor\n");
diff --git a/sound/soc/txx9/txx9aclc.c b/sound/soc/txx9/txx9aclc.c
index 21554611557..b609d2c64c5 100644
--- a/sound/soc/txx9/txx9aclc.c
+++ b/sound/soc/txx9/txx9aclc.c
@@ -132,7 +132,7 @@ txx9aclc_dma_submit(struct txx9aclc_dmadata *dmadata, dma_addr_t buf_dma_addr)
 	sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf_dma_addr)),
 		    dmadata->frag_bytes, buf_dma_addr & (PAGE_SIZE - 1));
 	sg_dma_address(&sg) = buf_dma_addr;
-	desc = chan->device->device_prep_slave_sg(chan, &sg, 1,
+	desc = dmaengine_prep_slave_sg(chan, &sg, 1,
 		dmadata->substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
 		DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
 		DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
-- 
cgit v1.2.3-70-g09d2


From 83e72dd97a25a831ff270ce4437416943a1e4b36 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Fri, 16 Mar 2012 14:41:21 -0500
Subject: apple_bl: Add register/unregister functions

Add functions to allow other modules to enable or disable apple_bl. This
will be used by the gmux driver to disable apple_bl when the gmux is
present, as it is a better and more reliable option for brightness
control.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
 drivers/video/backlight/apple_bl.c | 23 +++++++++++++++++++++--
 include/linux/apple_bl.h           | 26 ++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 2 deletions(-)
 create mode 100644 include/linux/apple_bl.h

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c
index be98d152b7f..a523b255e12 100644
--- a/drivers/video/backlight/apple_bl.c
+++ b/drivers/video/backlight/apple_bl.c
@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/pci.h>
 #include <linux/acpi.h>
+#include <linux/atomic.h>
 
 static struct backlight_device *apple_backlight_device;
 
@@ -221,14 +222,32 @@ static struct acpi_driver apple_bl_driver = {
 	},
 };
 
+static atomic_t apple_bl_registered = ATOMIC_INIT(0);
+
+int apple_bl_register(void)
+{
+	if (atomic_xchg(&apple_bl_registered, 1) == 0)
+		return acpi_bus_register_driver(&apple_bl_driver);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(apple_bl_register);
+
+void apple_bl_unregister(void)
+{
+	if (atomic_xchg(&apple_bl_registered, 0) == 1)
+		acpi_bus_unregister_driver(&apple_bl_driver);
+}
+EXPORT_SYMBOL_GPL(apple_bl_unregister);
+
 static int __init apple_bl_init(void)
 {
-	return acpi_bus_register_driver(&apple_bl_driver);
+	return apple_bl_register();
 }
 
 static void __exit apple_bl_exit(void)
 {
-	acpi_bus_unregister_driver(&apple_bl_driver);
+	apple_bl_unregister();
 }
 
 module_init(apple_bl_init);
diff --git a/include/linux/apple_bl.h b/include/linux/apple_bl.h
new file mode 100644
index 00000000000..47bedc0eee6
--- /dev/null
+++ b/include/linux/apple_bl.h
@@ -0,0 +1,26 @@
+/*
+ * apple_bl exported symbols
+ */
+
+#ifndef _LINUX_APPLE_BL_H
+#define _LINUX_APPLE_BL_H
+
+#ifdef CONFIG_BACKLIGHT_APPLE
+
+extern int apple_bl_register(void);
+extern void apple_bl_unregister(void);
+
+#else /* !CONFIG_BACKLIGHT_APPLE */
+
+static inline int apple_bl_register(void)
+{
+	return 0;
+}
+
+static inline void apple_bl_unregister(void)
+{
+}
+
+#endif /* !CONFIG_BACKLIGHT_APPLE */
+
+#endif /* _LINUX_APPLE_BL_H */
-- 
cgit v1.2.3-70-g09d2


From 81ce6864444facc95ba7fe25575153425106c985 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 23 Mar 2012 15:01:59 -0700
Subject: backlight: convert backlight i2c drivers to module_i2c_driver

Factor out some boilerplate code for i2c driver registration into
module_i2c_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/adp8860_bl.c | 12 +-----------
 drivers/video/backlight/adp8870_bl.c | 12 +-----------
 drivers/video/backlight/tosa_bl.c    | 13 +------------
 3 files changed, 3 insertions(+), 34 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 378276c9d3c..550dbf0bb89 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -819,17 +819,7 @@ static struct i2c_driver adp8860_driver = {
 	.id_table = adp8860_id,
 };
 
-static int __init adp8860_init(void)
-{
-	return i2c_add_driver(&adp8860_driver);
-}
-module_init(adp8860_init);
-
-static void __exit adp8860_exit(void)
-{
-	i2c_del_driver(&adp8860_driver);
-}
-module_exit(adp8860_exit);
+module_i2c_driver(adp8860_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 6735059376d..9be58c6f18f 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -991,17 +991,7 @@ static struct i2c_driver adp8870_driver = {
 	.id_table = adp8870_id,
 };
 
-static int __init adp8870_init(void)
-{
-	return i2c_add_driver(&adp8870_driver);
-}
-module_init(adp8870_init);
-
-static void __exit adp8870_exit(void)
-{
-	i2c_del_driver(&adp8870_driver);
-}
-module_exit(adp8870_exit);
+module_i2c_driver(adp8870_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index 425a7365470..2b241abced4 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -181,18 +181,7 @@ static struct i2c_driver tosa_bl_driver = {
 	.id_table	= tosa_bl_id,
 };
 
-static int __init tosa_bl_init(void)
-{
-	return i2c_add_driver(&tosa_bl_driver);
-}
-
-static void __exit tosa_bl_exit(void)
-{
-	i2c_del_driver(&tosa_bl_driver);
-}
-
-module_init(tosa_bl_init);
-module_exit(tosa_bl_exit);
+module_i2c_driver(tosa_bl_driver);
 
 MODULE_AUTHOR("Dmitry Baryshkov");
 MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-70-g09d2


From 462dd83833065a6b3add3f102f4fe69efa1422e9 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 23 Mar 2012 15:01:59 -0700
Subject: backlight: convert backlight spi drivers to module_spi_driver

Factor out some boilerplate code for spi driver registration into
module_spi_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Alberto Panizzo <alberto@amarulasolutions.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/ams369fg06.c  | 13 +------------
 drivers/video/backlight/corgi_lcd.c   | 12 +-----------
 drivers/video/backlight/l4f00242t03.c | 13 +------------
 drivers/video/backlight/ld9040.c      | 13 +------------
 drivers/video/backlight/lms283gf05.c  | 13 +------------
 drivers/video/backlight/ltv350qv.c    | 12 +-----------
 drivers/video/backlight/s6e63m0.c     | 13 +------------
 drivers/video/backlight/tdo24m.c      | 12 +-----------
 drivers/video/backlight/tosa_lcd.c    | 13 +------------
 drivers/video/backlight/vgg2432a4.c   | 15 +--------------
 10 files changed, 10 insertions(+), 119 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c
index 7838a23fbdd..7bdadc79011 100644
--- a/drivers/video/backlight/ams369fg06.c
+++ b/drivers/video/backlight/ams369fg06.c
@@ -629,18 +629,7 @@ static struct spi_driver ams369fg06_driver = {
 	.resume		= ams369fg06_resume,
 };
 
-static int __init ams369fg06_init(void)
-{
-	return spi_register_driver(&ams369fg06_driver);
-}
-
-static void __exit ams369fg06_exit(void)
-{
-	spi_unregister_driver(&ams369fg06_driver);
-}
-
-module_init(ams369fg06_init);
-module_exit(ams369fg06_exit);
+module_spi_driver(ams369fg06_driver);
 
 MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
 MODULE_DESCRIPTION("ams369fg06 LCD Driver");
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index c6533bad26f..6dab13fe562 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -629,17 +629,7 @@ static struct spi_driver corgi_lcd_driver = {
 	.resume		= corgi_lcd_resume,
 };
 
-static int __init corgi_lcd_init(void)
-{
-	return spi_register_driver(&corgi_lcd_driver);
-}
-module_init(corgi_lcd_init);
-
-static void __exit corgi_lcd_exit(void)
-{
-	spi_unregister_driver(&corgi_lcd_driver);
-}
-module_exit(corgi_lcd_exit);
+module_spi_driver(corgi_lcd_driver);
 
 MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00");
 MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 27d1d7a29c7..6022b67285e 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -274,18 +274,7 @@ static struct spi_driver l4f00242t03_driver = {
 	.shutdown	= l4f00242t03_shutdown,
 };
 
-static __init int l4f00242t03_init(void)
-{
-	return spi_register_driver(&l4f00242t03_driver);
-}
-
-static __exit void l4f00242t03_exit(void)
-{
-	spi_unregister_driver(&l4f00242t03_driver);
-}
-
-module_init(l4f00242t03_init);
-module_exit(l4f00242t03_exit);
+module_spi_driver(l4f00242t03_driver);
 
 MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
 MODULE_DESCRIPTION("EPSON L4F00242T03 LCD");
diff --git a/drivers/video/backlight/ld9040.c b/drivers/video/backlight/ld9040.c
index 78dafc0c8fc..efd352be21a 100644
--- a/drivers/video/backlight/ld9040.c
+++ b/drivers/video/backlight/ld9040.c
@@ -856,18 +856,7 @@ static struct spi_driver ld9040_driver = {
 	.resume		= ld9040_resume,
 };
 
-static int __init ld9040_init(void)
-{
-	return spi_register_driver(&ld9040_driver);
-}
-
-static void __exit ld9040_exit(void)
-{
-	spi_unregister_driver(&ld9040_driver);
-}
-
-module_init(ld9040_init);
-module_exit(ld9040_exit);
+module_spi_driver(ld9040_driver);
 
 MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
 MODULE_DESCRIPTION("ld9040 LCD Driver");
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index 4ec78cfe26e..4161f9e3982 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -226,18 +226,7 @@ static struct spi_driver lms283gf05_driver = {
 	.remove		= __devexit_p(lms283gf05_remove),
 };
 
-static __init int lms283gf05_init(void)
-{
-	return spi_register_driver(&lms283gf05_driver);
-}
-
-static __exit void lms283gf05_exit(void)
-{
-	spi_unregister_driver(&lms283gf05_driver);
-}
-
-module_init(lms283gf05_init);
-module_exit(lms283gf05_exit);
+module_spi_driver(lms283gf05_driver);
 
 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
 MODULE_DESCRIPTION("LCD283GF05 LCD");
diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c
index cca43c06d3c..333949ff326 100644
--- a/drivers/video/backlight/ltv350qv.c
+++ b/drivers/video/backlight/ltv350qv.c
@@ -321,17 +321,7 @@ static struct spi_driver ltv350qv_driver = {
 	.resume		= ltv350qv_resume,
 };
 
-static int __init ltv350qv_init(void)
-{
-	return spi_register_driver(&ltv350qv_driver);
-}
-
-static void __exit ltv350qv_exit(void)
-{
-	spi_unregister_driver(&ltv350qv_driver);
-}
-module_init(ltv350qv_init);
-module_exit(ltv350qv_exit);
+module_spi_driver(ltv350qv_driver);
 
 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
 MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 516db703dd2..e264f55b257 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -909,18 +909,7 @@ static struct spi_driver s6e63m0_driver = {
 	.resume		= s6e63m0_resume,
 };
 
-static int __init s6e63m0_init(void)
-{
-	return spi_register_driver(&s6e63m0_driver);
-}
-
-static void __exit s6e63m0_exit(void)
-{
-	spi_unregister_driver(&s6e63m0_driver);
-}
-
-module_init(s6e63m0_init);
-module_exit(s6e63m0_exit);
+module_spi_driver(s6e63m0_driver);
 
 MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
 MODULE_DESCRIPTION("S6E63M0 LCD Driver");
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index 1997e12a105..2368b8e5f89 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -459,17 +459,7 @@ static struct spi_driver tdo24m_driver = {
 	.resume		= tdo24m_resume,
 };
 
-static int __init tdo24m_init(void)
-{
-	return spi_register_driver(&tdo24m_driver);
-}
-module_init(tdo24m_init);
-
-static void __exit tdo24m_exit(void)
-{
-	spi_unregister_driver(&tdo24m_driver);
-}
-module_exit(tdo24m_exit);
+module_spi_driver(tdo24m_driver);
 
 MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
 MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel");
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 772f6015219..a2161f631a8 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -285,18 +285,7 @@ static struct spi_driver tosa_lcd_driver = {
 	.resume		= tosa_lcd_resume,
 };
 
-static int __init tosa_lcd_init(void)
-{
-	return spi_register_driver(&tosa_lcd_driver);
-}
-
-static void __exit tosa_lcd_exit(void)
-{
-	spi_unregister_driver(&tosa_lcd_driver);
-}
-
-module_init(tosa_lcd_init);
-module_exit(tosa_lcd_exit);
+module_spi_driver(tosa_lcd_driver);
 
 MODULE_AUTHOR("Dmitry Baryshkov");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c
index b49063c831e..b617fae9aa2 100644
--- a/drivers/video/backlight/vgg2432a4.c
+++ b/drivers/video/backlight/vgg2432a4.c
@@ -262,20 +262,7 @@ static struct spi_driver vgg2432a4_driver = {
 	.resume		= vgg2432a4_resume,
 };
 
-/* Device driver initialisation */
-
-static int __init vgg2432a4_init(void)
-{
-	return spi_register_driver(&vgg2432a4_driver);
-}
-
-static void __exit vgg2432a4_exit(void)
-{
-	spi_unregister_driver(&vgg2432a4_driver);
-}
-
-module_init(vgg2432a4_init);
-module_exit(vgg2432a4_exit);
+module_spi_driver(vgg2432a4_driver);
 
 MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>");
 MODULE_DESCRIPTION("VGG2432A4 LCD Driver");
-- 
cgit v1.2.3-70-g09d2


From 1107d40a50956146d1272f5cffcdf1d83f7e703e Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Fri, 23 Mar 2012 15:02:00 -0700
Subject: drivers/video/backlight/wm831x_bl.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/wm831x_bl.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
index 4e915f5eca9..5d365deb5f8 100644
--- a/drivers/video/backlight/wm831x_bl.c
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -186,7 +186,7 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
@@ -200,7 +200,6 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 				       &wm831x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
-		kfree(data);
 		return PTR_ERR(bl);
 	}
 
@@ -211,7 +210,6 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 	/* Disable the DCDC if it was started so we can bootstrap */
 	wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
 
-
 	backlight_update_status(bl);
 
 	return 0;
@@ -220,10 +218,8 @@ static int wm831x_backlight_probe(struct platform_device *pdev)
 static int wm831x_backlight_remove(struct platform_device *pdev)
 {
 	struct backlight_device *bl = platform_get_drvdata(pdev);
-	struct wm831x_backlight_data *data = bl_get_data(bl);
 
 	backlight_device_unregister(bl);
-	kfree(data);
 	return 0;
 }
 
-- 
cgit v1.2.3-70-g09d2


From ce969228fdb54a7e3d7cc1ed27367fd4b9525d74 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Fri, 23 Mar 2012 15:02:00 -0700
Subject: drivers/video/backlight: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/88pm860x_bl.c        |  8 ++------
 drivers/video/backlight/aat2870_bl.c         |  9 ++++-----
 drivers/video/backlight/cr_bllcd.c           |  3 +--
 drivers/video/backlight/da903x_bl.c          |  6 +-----
 drivers/video/backlight/max8925_bl.c         |  7 ++-----
 drivers/video/backlight/omap1_bl.c           |  9 +++------
 drivers/video/backlight/pcf50633-backlight.c | 16 +++-------------
 drivers/video/backlight/pwm_bl.c             |  7 ++-----
 8 files changed, 18 insertions(+), 47 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index a1376dc73d7..915943af3f2 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -187,7 +187,8 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	data = kzalloc(sizeof(struct pm860x_backlight_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_backlight_data),
+			    GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 	strncpy(name, res->name, MFD_NAME_SIZE);
@@ -200,7 +201,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	data->port = pdata->flags;
 	if (data->port < 0) {
 		dev_err(&pdev->dev, "wrong platform data is assigned");
-		kfree(data);
 		return -EINVAL;
 	}
 
@@ -211,7 +211,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 					&pm860x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
-		kfree(data);
 		return PTR_ERR(bl);
 	}
 	bl->props.brightness = MAX_BRIGHTNESS;
@@ -247,17 +246,14 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	return 0;
 out:
 	backlight_device_unregister(bl);
-	kfree(data);
 	return ret;
 }
 
 static int pm860x_backlight_remove(struct platform_device *pdev)
 {
 	struct backlight_device *bl = platform_get_drvdata(pdev);
-	struct pm860x_backlight_data *data = bl_get_data(bl);
 
 	backlight_device_unregister(bl);
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
index 331f1ef1dad..7ff752288b9 100644
--- a/drivers/video/backlight/aat2870_bl.c
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -145,7 +145,9 @@ static int aat2870_bl_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	aat2870_bl = kzalloc(sizeof(struct aat2870_bl_driver_data), GFP_KERNEL);
+	aat2870_bl = devm_kzalloc(&pdev->dev,
+				  sizeof(struct aat2870_bl_driver_data),
+				  GFP_KERNEL);
 	if (!aat2870_bl) {
 		dev_err(&pdev->dev,
 			"Failed to allocate memory for aat2870 backlight\n");
@@ -162,7 +164,7 @@ static int aat2870_bl_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Failed allocate memory for backlight device\n");
 		ret = PTR_ERR(bd);
-		goto out_kfree;
+		goto out;
 	}
 
 	aat2870_bl->pdev = pdev;
@@ -199,8 +201,6 @@ static int aat2870_bl_probe(struct platform_device *pdev)
 
 out_bl_dev_unregister:
 	backlight_device_unregister(bd);
-out_kfree:
-	kfree(aat2870_bl);
 out:
 	return ret;
 }
@@ -215,7 +215,6 @@ static int aat2870_bl_remove(struct platform_device *pdev)
 	backlight_update_status(bd);
 
 	backlight_device_unregister(bd);
-	kfree(aat2870_bl);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
index 6c8c54041fa..22489eb5f3e 100644
--- a/drivers/video/backlight/cr_bllcd.c
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -212,7 +212,7 @@ static int cr_backlight_probe(struct platform_device *pdev)
 			      &gpio_bar);
 	gpio_bar &= ~0x3F;
 
-	crp = kzalloc(sizeof(*crp), GFP_KERNEL);
+	crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL);
 	if (!crp) {
 		lcd_device_unregister(ldp);
 		backlight_device_unregister(bdp);
@@ -243,7 +243,6 @@ static int cr_backlight_remove(struct platform_device *pdev)
 	backlight_device_unregister(crp->cr_backlight_device);
 	lcd_device_unregister(crp->cr_lcd_device);
 	pci_dev_put(lpc_dev);
-	kfree(crp);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index abb4a06268f..30e19681a30 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -110,7 +110,7 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 	struct backlight_properties props;
 	int max_brightness;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
@@ -124,7 +124,6 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 	default:
 		dev_err(&pdev->dev, "invalid backlight device ID(%d)\n",
 				pdev->id);
-		kfree(data);
 		return -EINVAL;
 	}
 
@@ -143,7 +142,6 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 				       &da903x_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
-		kfree(data);
 		return PTR_ERR(bl);
 	}
 
@@ -157,10 +155,8 @@ static int da903x_backlight_probe(struct platform_device *pdev)
 static int da903x_backlight_remove(struct platform_device *pdev)
 {
 	struct backlight_device *bl = platform_get_drvdata(pdev);
-	struct da903x_backlight_data *data = bl_get_data(bl);
 
 	backlight_device_unregister(bl);
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index c915e3b5388..e833ac72e06 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -129,7 +129,8 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	data = kzalloc(sizeof(struct max8925_backlight_data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(struct max8925_backlight_data),
+			    GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 	strncpy(name, res->name, MAX8925_NAME_SIZE);
@@ -143,7 +144,6 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
 					&max8925_backlight_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
-		kfree(data);
 		return PTR_ERR(bl);
 	}
 	bl->props.brightness = MAX_BRIGHTNESS;
@@ -165,17 +165,14 @@ static int __devinit max8925_backlight_probe(struct platform_device *pdev)
 	return 0;
 out:
 	backlight_device_unregister(bl);
-	kfree(data);
 	return ret;
 }
 
 static int __devexit max8925_backlight_remove(struct platform_device *pdev)
 {
 	struct backlight_device *bl = platform_get_drvdata(pdev);
-	struct max8925_backlight_data *data = bl_get_data(bl);
 
 	backlight_device_unregister(bl);
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index d8cde277ec8..0175bfb08a1 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -141,7 +141,8 @@ static int omapbl_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENXIO;
 
-	bl = kzalloc(sizeof(struct omap_backlight), GFP_KERNEL);
+	bl = devm_kzalloc(&pdev->dev, sizeof(struct omap_backlight),
+			  GFP_KERNEL);
 	if (unlikely(!bl))
 		return -ENOMEM;
 
@@ -150,10 +151,8 @@ static int omapbl_probe(struct platform_device *pdev)
 	props.max_brightness = OMAPBL_MAX_INTENSITY;
 	dev = backlight_device_register("omap-bl", &pdev->dev, bl, &omapbl_ops,
 					&props);
-	if (IS_ERR(dev)) {
-		kfree(bl);
+	if (IS_ERR(dev))
 		return PTR_ERR(dev);
-	}
 
 	bl->powermode = FB_BLANK_POWERDOWN;
 	bl->current_intensity = 0;
@@ -177,10 +176,8 @@ static int omapbl_probe(struct platform_device *pdev)
 static int omapbl_remove(struct platform_device *pdev)
 {
 	struct backlight_device *dev = platform_get_drvdata(pdev);
-	struct omap_backlight *bl = dev_get_drvdata(&dev->dev);
 
 	backlight_device_unregister(dev);
-	kfree(bl);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
index 13e88b71dae..c65853cb974 100644
--- a/drivers/video/backlight/pcf50633-backlight.c
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -101,14 +101,13 @@ static const struct backlight_ops pcf50633_bl_ops = {
 
 static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
 {
-	int ret;
 	struct pcf50633_bl *pcf_bl;
 	struct device *parent = pdev->dev.parent;
 	struct pcf50633_platform_data *pcf50633_data = parent->platform_data;
 	struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data;
 	struct backlight_properties bl_props;
 
-	pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL);
+	pcf_bl = devm_kzalloc(&pdev->dev, sizeof(*pcf_bl), GFP_KERNEL);
 	if (!pcf_bl)
 		return -ENOMEM;
 
@@ -129,10 +128,8 @@ static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
 	pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
 						&pcf50633_bl_ops, &bl_props);
 
-	if (IS_ERR(pcf_bl->bl)) {
-		ret = PTR_ERR(pcf_bl->bl);
-		goto err_free;
-	}
+	if (IS_ERR(pcf_bl->bl))
+		return PTR_ERR(pcf_bl->bl);
 
 	platform_set_drvdata(pdev, pcf_bl);
 
@@ -145,11 +142,6 @@ static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
 	backlight_update_status(pcf_bl->bl);
 
 	return 0;
-
-err_free:
-	kfree(pcf_bl);
-
-	return ret;
 }
 
 static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
@@ -160,8 +152,6 @@ static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, NULL);
 
-	kfree(pcf_bl);
-
 	return 0;
 }
 
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 7496d04e1d3..342b7d7cbb6 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -102,7 +102,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	pb = kzalloc(sizeof(*pb), GFP_KERNEL);
+	pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL);
 	if (!pb) {
 		dev_err(&pdev->dev, "no memory for state\n");
 		ret = -ENOMEM;
@@ -121,7 +121,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	if (IS_ERR(pb->pwm)) {
 		dev_err(&pdev->dev, "unable to request PWM for backlight\n");
 		ret = PTR_ERR(pb->pwm);
-		goto err_pwm;
+		goto err_alloc;
 	} else
 		dev_dbg(&pdev->dev, "got pwm for backlight\n");
 
@@ -144,8 +144,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 err_bl:
 	pwm_free(pb->pwm);
-err_pwm:
-	kfree(pb);
 err_alloc:
 	if (data->exit)
 		data->exit(&pdev->dev);
@@ -162,7 +160,6 @@ static int pwm_backlight_remove(struct platform_device *pdev)
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
 	pwm_free(pb->pwm);
-	kfree(pb);
 	if (data->exit)
 		data->exit(&pdev->dev);
 	return 0;
-- 
cgit v1.2.3-70-g09d2


From 050ea48bbfc80b6aa81f8df0d9f25e6e47d96e98 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Fri, 23 Mar 2012 15:02:01 -0700
Subject: drivers/video/backlight/adp5520_bl.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/adp5520_bl.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
index 2e630bf1164..4911ea7989c 100644
--- a/drivers/video/backlight/adp5520_bl.c
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -289,7 +289,7 @@ static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 	struct adp5520_bl *data;
 	int ret = 0;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
 		return -ENOMEM;
 
@@ -298,7 +298,6 @@ static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 
 	if (data->pdata  == NULL) {
 		dev_err(&pdev->dev, "missing platform data\n");
-		kfree(data);
 		return -ENODEV;
 	}
 
@@ -314,7 +313,6 @@ static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 				       &adp5520_bl_ops, &props);
 	if (IS_ERR(bl)) {
 		dev_err(&pdev->dev, "failed to register backlight\n");
-		kfree(data);
 		return PTR_ERR(bl);
 	}
 
@@ -326,7 +324,6 @@ static int __devinit adp5520_bl_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register sysfs\n");
 		backlight_device_unregister(bl);
-		kfree(data);
 	}
 
 	platform_set_drvdata(pdev, bl);
@@ -348,7 +345,6 @@ static int __devexit adp5520_bl_remove(struct platform_device *pdev)
 				&adp5520_bl_attr_group);
 
 	backlight_device_unregister(bl);
-	kfree(data);
 
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From 7be865ab8634d4ec2a6bdb9459b268cd60e832af Mon Sep 17 00:00:00 2001
From: "Kim, Milo" <Milo.Kim@ti.com>
Date: Fri, 23 Mar 2012 15:02:01 -0700
Subject: backlight: new backlight driver for LP855x devices

THis driver supports TI LP8550/LP8551/LP8552/LP8553/LP8556 backlight
devices.

The brightness can be controlled by the I2C or PWM input.  The lp855x
driver provides both modes.  For the PWM control, pwm-specific functions
can be defined in the platform data.  And some information can be read
via the sysfs(lp855x device attributes).

For details, please refer to Documentation/backlight/lp855x-driver.txt.

[axel.lin@gmail.com: add missing mutex_unlock in lp855x_read_byte() error path]
[axel.lin@gmail.com: check platform data in lp855x_probe()]
[axel.lin@gmail.com: small cleanups]
[dan.carpenter@oracle.com: silence a compiler warning]
[axel.lin@gmail.com: use id->driver_data to differentiate lp855x chips]
[akpm@linux-foundation.org: simplify boolean return expression]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/backlight/lp855x-driver.txt |  78 +++++++
 drivers/video/backlight/Kconfig           |   7 +
 drivers/video/backlight/Makefile          |   1 +
 drivers/video/backlight/lp855x_bl.c       | 331 ++++++++++++++++++++++++++++++
 include/linux/lp855x.h                    | 131 ++++++++++++
 5 files changed, 548 insertions(+)
 create mode 100644 Documentation/backlight/lp855x-driver.txt
 create mode 100644 drivers/video/backlight/lp855x_bl.c
 create mode 100644 include/linux/lp855x.h

(limited to 'drivers/video')

diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
new file mode 100644
index 00000000000..f5e4caafab7
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -0,0 +1,78 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+	Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Device attributes
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name. If it is not defined, default name is set.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+	     Only valid when brightness is pwm input mode.
+	     Functions should be implemented by PWM driver.
+	     - pwm_set_intensity() : set duty of PWM
+	     - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+	0 : use default configuration data
+	1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR	0xA5
+#define EEPROM_A5_VAL	0x4f	/* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+	{EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+	.name = "lcd-bl",
+	.mode = REGISTER_BASED,
+	.device_control = I2C_CONFIG(LP8552),
+	.initial_brightness = INITIAL_BRT,
+	.load_new_rom_data = 1,
+	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+	.rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+	.mode = PWM_BASED,
+	.device_control = PWM_CONFIG(LP8556),
+	.initial_brightness = INITIAL_BRT,
+	.pwm_data = {
+		     .pwm_set_intensity = platform_pwm_set_intensity,
+		     .pwm_get_intensity = platform_pwm_get_intensity,
+		     },
+};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 681b36929fe..49e7d83f869 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -334,6 +334,13 @@ config BACKLIGHT_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_LP855X
+	tristate "Backlight driver for TI LP855X"
+	depends on BACKLIGHT_CLASS_DEVICE && I2C
+	help
+	  This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
+	  backlight driver.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index af5cf654ec7..0ee06e0832b 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_BACKLIGHT_GENERIC)	+= generic_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)	+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
+obj-$(CONFIG_BACKLIGHT_LP855X)	+= lp855x_bl.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
new file mode 100644
index 00000000000..72a0e0c917c
--- /dev/null
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -0,0 +1,331 @@
+/*
+ * TI LP855x Backlight Driver
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/lp855x.h>
+
+/* Registers */
+#define BRIGHTNESS_CTRL		(0x00)
+#define DEVICE_CTRL		(0x01)
+
+#define BUF_SIZE		20
+#define DEFAULT_BL_NAME		"lcd-backlight"
+#define MAX_BRIGHTNESS		255
+
+struct lp855x {
+	const char *chipname;
+	enum lp855x_chip_id chip_id;
+	struct i2c_client *client;
+	struct backlight_device *bl;
+	struct device *dev;
+	struct mutex xfer_lock;
+	struct lp855x_platform_data *pdata;
+};
+
+static int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
+{
+	int ret;
+
+	mutex_lock(&lp->xfer_lock);
+	ret = i2c_smbus_read_byte_data(lp->client, reg);
+	if (ret < 0) {
+		mutex_unlock(&lp->xfer_lock);
+		dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
+		return ret;
+	}
+	mutex_unlock(&lp->xfer_lock);
+
+	*data = (u8)ret;
+	return 0;
+}
+
+static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
+{
+	int ret;
+
+	mutex_lock(&lp->xfer_lock);
+	ret = i2c_smbus_write_byte_data(lp->client, reg, data);
+	mutex_unlock(&lp->xfer_lock);
+
+	return ret;
+}
+
+static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
+{
+	u8 start, end;
+
+	switch (lp->chip_id) {
+	case LP8550:
+	case LP8551:
+	case LP8552:
+	case LP8553:
+		start = EEPROM_START;
+		end = EEPROM_END;
+		break;
+	case LP8556:
+		start = EPROM_START;
+		end = EPROM_END;
+		break;
+	default:
+		return false;
+	}
+
+	return (addr >= start && addr <= end);
+}
+
+static int lp855x_init_registers(struct lp855x *lp)
+{
+	u8 val, addr;
+	int i, ret;
+	struct lp855x_platform_data *pd = lp->pdata;
+
+	val = pd->initial_brightness;
+	ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+	if (ret)
+		return ret;
+
+	val = pd->device_control;
+	ret = lp855x_write_byte(lp, DEVICE_CTRL, val);
+	if (ret)
+		return ret;
+
+	if (pd->load_new_rom_data && pd->size_program) {
+		for (i = 0; i < pd->size_program; i++) {
+			addr = pd->rom_data[i].addr;
+			val = pd->rom_data[i].val;
+			if (!lp855x_is_valid_rom_area(lp, addr))
+				continue;
+
+			ret = lp855x_write_byte(lp, addr, val);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int lp855x_bl_update_status(struct backlight_device *bl)
+{
+	struct lp855x *lp = bl_get_data(bl);
+	enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+	if (bl->props.state & BL_CORE_SUSPENDED)
+		bl->props.brightness = 0;
+
+	if (mode == PWM_BASED) {
+		struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+		int br = bl->props.brightness;
+		int max_br = bl->props.max_brightness;
+
+		if (pd->pwm_set_intensity)
+			pd->pwm_set_intensity(br, max_br);
+
+	} else if (mode == REGISTER_BASED) {
+		u8 val = bl->props.brightness;
+		lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+	}
+
+	return 0;
+}
+
+static int lp855x_bl_get_brightness(struct backlight_device *bl)
+{
+	struct lp855x *lp = bl_get_data(bl);
+	enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+	if (mode == PWM_BASED) {
+		struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+		int max_br = bl->props.max_brightness;
+
+		if (pd->pwm_get_intensity)
+			bl->props.brightness = pd->pwm_get_intensity(max_br);
+
+	} else if (mode == REGISTER_BASED) {
+		u8 val = 0;
+
+		lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
+		bl->props.brightness = val;
+	}
+
+	return bl->props.brightness;
+}
+
+static const struct backlight_ops lp855x_bl_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = lp855x_bl_update_status,
+	.get_brightness = lp855x_bl_get_brightness,
+};
+
+static int lp855x_backlight_register(struct lp855x *lp)
+{
+	struct backlight_device *bl;
+	struct backlight_properties props;
+	struct lp855x_platform_data *pdata = lp->pdata;
+	char *name = pdata->name ? : DEFAULT_BL_NAME;
+
+	props.type = BACKLIGHT_PLATFORM;
+	props.max_brightness = MAX_BRIGHTNESS;
+
+	if (pdata->initial_brightness > props.max_brightness)
+		pdata->initial_brightness = props.max_brightness;
+
+	props.brightness = pdata->initial_brightness;
+
+	bl = backlight_device_register(name, lp->dev, lp,
+				       &lp855x_bl_ops, &props);
+	if (IS_ERR(bl))
+		return PTR_ERR(bl);
+
+	lp->bl = bl;
+
+	return 0;
+}
+
+static void lp855x_backlight_unregister(struct lp855x *lp)
+{
+	if (lp->bl)
+		backlight_device_unregister(lp->bl);
+}
+
+static ssize_t lp855x_get_chip_id(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp855x *lp = dev_get_drvdata(dev);
+	return scnprintf(buf, BUF_SIZE, "%s\n", lp->chipname);
+}
+
+static ssize_t lp855x_get_bl_ctl_mode(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct lp855x *lp = dev_get_drvdata(dev);
+	enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+	char *strmode = NULL;
+
+	if (mode == PWM_BASED)
+		strmode = "pwm based";
+	else if (mode == REGISTER_BASED)
+		strmode = "register based";
+
+	return scnprintf(buf, BUF_SIZE, "%s\n", strmode);
+}
+
+static DEVICE_ATTR(chip_id, S_IRUGO, lp855x_get_chip_id, NULL);
+static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp855x_get_bl_ctl_mode, NULL);
+
+static struct attribute *lp855x_attributes[] = {
+	&dev_attr_chip_id.attr,
+	&dev_attr_bl_ctl_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group lp855x_attr_group = {
+	.attrs = lp855x_attributes,
+};
+
+static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+	struct lp855x *lp;
+	struct lp855x_platform_data *pdata = cl->dev.platform_data;
+	enum lp855x_brightness_ctrl_mode mode;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&cl->dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EIO;
+
+	lp = devm_kzalloc(&cl->dev, sizeof(struct lp855x), GFP_KERNEL);
+	if (!lp)
+		return -ENOMEM;
+
+	mode = pdata->mode;
+	lp->client = cl;
+	lp->dev = &cl->dev;
+	lp->pdata = pdata;
+	lp->chipname = id->name;
+	lp->chip_id = id->driver_data;
+	i2c_set_clientdata(cl, lp);
+
+	mutex_init(&lp->xfer_lock);
+
+	ret = lp855x_init_registers(lp);
+	if (ret) {
+		dev_err(lp->dev, "i2c communication err: %d", ret);
+		if (mode == REGISTER_BASED)
+			goto err_dev;
+	}
+
+	ret = lp855x_backlight_register(lp);
+	if (ret) {
+		dev_err(lp->dev,
+			"failed to register backlight. err: %d\n", ret);
+		goto err_dev;
+	}
+
+	ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group);
+	if (ret) {
+		dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret);
+		goto err_sysfs;
+	}
+
+	backlight_update_status(lp->bl);
+	return 0;
+
+err_sysfs:
+	lp855x_backlight_unregister(lp);
+err_dev:
+	return ret;
+}
+
+static int __devexit lp855x_remove(struct i2c_client *cl)
+{
+	struct lp855x *lp = i2c_get_clientdata(cl);
+
+	lp->bl->props.brightness = 0;
+	backlight_update_status(lp->bl);
+	sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group);
+	lp855x_backlight_unregister(lp);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp855x_ids[] = {
+	{"lp8550", LP8550},
+	{"lp8551", LP8551},
+	{"lp8552", LP8552},
+	{"lp8553", LP8553},
+	{"lp8556", LP8556},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp855x_ids);
+
+static struct i2c_driver lp855x_driver = {
+	.driver = {
+		   .name = "lp855x",
+		   },
+	.probe = lp855x_probe,
+	.remove = __devexit_p(lp855x_remove),
+	.id_table = lp855x_ids,
+};
+
+module_i2c_driver(lp855x_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 00000000000..781a490a451
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,131 @@
+/*
+ * LP855x Backlight Driver
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT	(0)
+#define BRT_MODE_SHFT	(1)
+#define BRT_MODE_MASK	(0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL	(1)
+#define DISABLE_BL	(0)
+
+#define I2C_CONFIG(id)	id ## _I2C_CONFIG
+#define PWM_CONFIG(id)	id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
+				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START	(0xA0)
+#define EEPROM_END	(0xA7)
+#define EPROM_START	(0xA0)
+#define EPROM_END	(0xAF)
+
+enum lp855x_chip_id {
+	LP8550,
+	LP8551,
+	LP8552,
+	LP8553,
+	LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+	PWM_BASED = 1,
+	REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+	LP8550_PWM_ONLY,
+	LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+	LP8556_PWM_ONLY,
+	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
+	LP8556_I2C_ONLY,
+	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+	void (*pwm_set_intensity) (int brightness, int max_brightness);
+	int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+	u8 addr;
+	u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : Backlight driver name. If it is not defined, default name is set.
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+		Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+	0 : use default configuration data
+	1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+	char *name;
+	enum lp855x_brightness_ctrl_mode mode;
+	u8 device_control;
+	int initial_brightness;
+	struct lp855x_pwm_data pwm_data;
+	u8 load_new_rom_data;
+	int size_program;
+	struct lp855x_rom_data *rom_data;
+};
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From c8df7428635c02ca3051e39179c83297d8b76fba Mon Sep 17 00:00:00 2001
From: Christian Gmeiner <christian.gmeiner@gmail.com>
Date: Fri, 23 Mar 2012 15:02:02 -0700
Subject: backlight: add driver for Bachmann's ot200

Add backlight driver for Bachmann's ot200 visualisation device.  The
driver uses MFGPT 7 of CS5535 silicon to regulate the backlight.

[akpm@linux-foundation.org: remove redundant test of `brightness']
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig    |   7 ++
 drivers/video/backlight/Makefile   |   2 +-
 drivers/video/backlight/ot200_bl.c | 175 +++++++++++++++++++++++++++++++++++++
 3 files changed, 183 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/backlight/ot200_bl.c

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 49e7d83f869..248d6c0858d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -341,6 +341,13 @@ config BACKLIGHT_LP855X
 	  This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
 	  backlight driver.
 
+config BACKLIGHT_OT200
+	tristate "Backlight driver for ot200 visualisation device"
+	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT
+	help
+	  To compile this driver as a module, choose M here: the module will be
+	  called ot200_bl.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 0ee06e0832b..c71dd793363 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -39,4 +39,4 @@ obj-$(CONFIG_BACKLIGHT_ADP8870)	+= adp8870_bl.o
 obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
-
+obj-$(CONFIG_BACKLIGHT_OT200) += ot200_bl.o
diff --git a/drivers/video/backlight/ot200_bl.c b/drivers/video/backlight/ot200_bl.c
new file mode 100644
index 00000000000..f519d55a294
--- /dev/null
+++ b/drivers/video/backlight/ot200_bl.c
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2012 Bachmann electronic GmbH
+ *	Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * Backlight driver for ot200 visualisation device from
+ * Bachmann electronic GmbH.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/gpio.h>
+#include <linux/cs5535.h>
+
+static struct cs5535_mfgpt_timer *pwm_timer;
+
+/* this array defines the mapping of brightness in % to pwm frequency */
+static const u8 dim_table[101] = {0, 0, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
+				  2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4,
+				  4, 5, 5, 5, 5, 6, 6, 6, 7, 7, 7, 8, 8, 9, 9,
+				  10, 10, 11, 11, 12, 12, 13, 14, 15, 15, 16,
+				  17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28,
+				  30, 31, 33, 35, 37, 39, 41, 43, 45, 47, 50,
+				  53, 55, 58, 61, 65, 68, 72, 75, 79, 84, 88,
+				  93, 97, 103, 108, 114, 120, 126, 133, 140,
+				  147, 155, 163};
+
+struct ot200_backlight_data {
+	int current_brightness;
+};
+
+#define GPIO_DIMM	27
+#define SCALE		1
+#define CMP1MODE	0x2	/* compare on GE; output high on compare
+				 * greater than or equal */
+#define PWM_SETUP	(SCALE | CMP1MODE << 6 | MFGPT_SETUP_CNTEN)
+#define MAX_COMP2	163
+
+static int ot200_backlight_update_status(struct backlight_device *bl)
+{
+	struct ot200_backlight_data *data = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.state & BL_CORE_FBBLANK)
+		brightness = 0;
+
+	/* enable or disable PWM timer */
+	if (brightness == 0)
+		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, 0);
+	else if (data->current_brightness == 0) {
+		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0);
+		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP,
+			MFGPT_SETUP_CNTEN);
+	}
+
+	/* apply new brightness value */
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1,
+		MAX_COMP2 - dim_table[brightness]);
+	data->current_brightness = brightness;
+
+	return 0;
+}
+
+static int ot200_backlight_get_brightness(struct backlight_device *bl)
+{
+	struct ot200_backlight_data *data = bl_get_data(bl);
+	return data->current_brightness;
+}
+
+static const struct backlight_ops ot200_backlight_ops = {
+	.update_status	= ot200_backlight_update_status,
+	.get_brightness	= ot200_backlight_get_brightness,
+};
+
+static int ot200_backlight_probe(struct platform_device *pdev)
+{
+	struct backlight_device *bl;
+	struct ot200_backlight_data *data;
+	struct backlight_properties props;
+	int retval = 0;
+
+	/* request gpio */
+	if (gpio_request(GPIO_DIMM, "ot200 backlight dimmer") < 0) {
+		dev_err(&pdev->dev, "failed to request GPIO %d\n", GPIO_DIMM);
+		return -ENODEV;
+	}
+
+	/* request timer */
+	pwm_timer = cs5535_mfgpt_alloc_timer(7, MFGPT_DOMAIN_ANY);
+	if (!pwm_timer) {
+		dev_err(&pdev->dev, "MFGPT 7 not available\n");
+		retval = -ENODEV;
+		goto error_mfgpt_alloc;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		retval = -ENOMEM;
+		goto error_kzalloc;
+	}
+
+	/* setup gpio */
+	cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_ENABLE);
+	cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_AUX1);
+
+	/* setup timer */
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1, 0);
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP2, MAX_COMP2);
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, PWM_SETUP);
+
+	data->current_brightness = 100;
+	props.max_brightness = 100;
+	props.brightness = 100;
+	props.type = BACKLIGHT_RAW;
+
+	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, data,
+					&ot200_backlight_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		retval = PTR_ERR(bl);
+		goto error_backlight_device_register;
+	}
+
+	platform_set_drvdata(pdev, bl);
+
+	return 0;
+
+error_backlight_device_register:
+	kfree(data);
+error_kzalloc:
+	cs5535_mfgpt_free_timer(pwm_timer);
+error_mfgpt_alloc:
+	gpio_free(GPIO_DIMM);
+	return retval;
+}
+
+static int ot200_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct ot200_backlight_data *data = bl_get_data(bl);
+
+	backlight_device_unregister(bl);
+
+	/* on module unload set brightness to 100% */
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0);
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1,
+		MAX_COMP2 - dim_table[100]);
+
+	cs5535_mfgpt_free_timer(pwm_timer);
+	gpio_free(GPIO_DIMM);
+
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver ot200_backlight_driver = {
+	.driver		= {
+		.name	= "ot200-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ot200_backlight_probe,
+	.remove		= ot200_backlight_remove,
+};
+
+module_platform_driver(ot200_backlight_driver);
+
+MODULE_DESCRIPTION("backlight driver for ot200 visualisation device");
+MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ot200-backlight");
-- 
cgit v1.2.3-70-g09d2


From 35c1682cc069fc1f677012d3170757135e246b39 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Fri, 23 Mar 2012 15:02:02 -0700
Subject: backlight: add support for Pandora backlight

Add support for pandora (openpandora.org) backlight.

It might look like all this could be done using pwm_bl.c instead, but
there is a need of special programming sequence when turning on the LED
driver chip or else it will misbehave.  Doing this using pwm_bl.c would
require to use some register programming and pwm functions from platform
code, and ARM maintainers are allergic to driver-like code in /arch/arm
nowadays.  The PMIC PWM driver is currently missing too, so pwm_bl.c
can't be used anyway.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig      |   7 ++
 drivers/video/backlight/Makefile     |   1 +
 drivers/video/backlight/pandora_bl.c | 171 +++++++++++++++++++++++++++++++++++
 3 files changed, 179 insertions(+)
 create mode 100644 drivers/video/backlight/pandora_bl.c

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 248d6c0858d..ed68fde5445 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -348,6 +348,13 @@ config BACKLIGHT_OT200
 	  To compile this driver as a module, choose M here: the module will be
 	  called ot200_bl.
 
+config BACKLIGHT_PANDORA
+	tristate "Backlight driver for Pandora console"
+	depends on TWL4030_CORE
+	help
+	  If you have a Pandora console, say Y to enable the
+	  backlight driver.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index c71dd793363..8071eb65614 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
 obj-$(CONFIG_BACKLIGHT_LP855X)	+= lp855x_bl.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)	+= omap1_bl.o
+obj-$(CONFIG_BACKLIGHT_PANDORA)	+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_PWM)	+= pwm_bl.o
diff --git a/drivers/video/backlight/pandora_bl.c b/drivers/video/backlight/pandora_bl.c
new file mode 100644
index 00000000000..4ec30748b44
--- /dev/null
+++ b/drivers/video/backlight/pandora_bl.c
@@ -0,0 +1,171 @@
+/*
+ * Backlight driver for Pandora handheld.
+ * Pandora uses TWL4030 PWM0 -> TPS61161 combo for control backlight.
+ * Based on pwm_bl.c
+ *
+ * Copyright 2009,2012 Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/i2c/twl.h>
+#include <linux/err.h>
+
+#define TWL_PWM0_ON		0x00
+#define TWL_PWM0_OFF		0x01
+
+#define TWL_INTBR_GPBR1		0x0c
+#define TWL_INTBR_PMBR1		0x0d
+
+#define TWL_PMBR1_PWM0_MUXMASK	0x0c
+#define TWL_PMBR1_PWM0		0x04
+#define PWM0_CLK_ENABLE		BIT(0)
+#define PWM0_ENABLE		BIT(2)
+
+/* range accepted by hardware */
+#define MIN_VALUE 9
+#define MAX_VALUE 63
+#define MAX_USER_VALUE (MAX_VALUE - MIN_VALUE)
+
+#define PANDORABL_WAS_OFF BL_CORE_DRIVER1
+
+static int pandora_backlight_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+	u8 r;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+	if (bl->props.state & BL_CORE_FBBLANK)
+		brightness = 0;
+	if (bl->props.state & BL_CORE_SUSPENDED)
+		brightness = 0;
+
+	if ((unsigned int)brightness > MAX_USER_VALUE)
+		brightness = MAX_USER_VALUE;
+
+	if (brightness == 0) {
+		if (bl->props.state & PANDORABL_WAS_OFF)
+			goto done;
+
+		/* first disable PWM0 output, then clock */
+		twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1);
+		r &= ~PWM0_ENABLE;
+		twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1);
+		r &= ~PWM0_CLK_ENABLE;
+		twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1);
+
+		goto done;
+	}
+
+	if (bl->props.state & PANDORABL_WAS_OFF) {
+		/*
+		 * set PWM duty cycle to max. TPS61161 seems to use this
+		 * to calibrate it's PWM sensitivity when it starts.
+		 */
+		twl_i2c_write_u8(TWL4030_MODULE_PWM0, MAX_VALUE,
+					TWL_PWM0_OFF);
+
+		/* first enable clock, then PWM0 out */
+		twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1);
+		r &= ~PWM0_ENABLE;
+		r |= PWM0_CLK_ENABLE;
+		twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1);
+		r |= PWM0_ENABLE;
+		twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1);
+
+		/*
+		 * TI made it very easy to enable digital control, so easy that
+		 * it often triggers unintentionally and disabes PWM control,
+		 * so wait until 1 wire mode detection window ends.
+		 */
+		usleep_range(2000, 10000);
+	}
+
+	twl_i2c_write_u8(TWL4030_MODULE_PWM0, MIN_VALUE + brightness,
+				TWL_PWM0_OFF);
+
+done:
+	if (brightness != 0)
+		bl->props.state &= ~PANDORABL_WAS_OFF;
+	else
+		bl->props.state |= PANDORABL_WAS_OFF;
+
+	return 0;
+}
+
+static int pandora_backlight_get_brightness(struct backlight_device *bl)
+{
+	return bl->props.brightness;
+}
+
+static const struct backlight_ops pandora_backlight_ops = {
+	.options	= BL_CORE_SUSPENDRESUME,
+	.update_status	= pandora_backlight_update_status,
+	.get_brightness	= pandora_backlight_get_brightness,
+};
+
+static int pandora_backlight_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	u8 r;
+
+	memset(&props, 0, sizeof(props));
+	props.max_brightness = MAX_USER_VALUE;
+	props.type = BACKLIGHT_RAW;
+	bl = backlight_device_register(pdev->name, &pdev->dev,
+			NULL, &pandora_backlight_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		return PTR_ERR(bl);
+	}
+
+	platform_set_drvdata(pdev, bl);
+
+	/* 64 cycle period, ON position 0 */
+	twl_i2c_write_u8(TWL4030_MODULE_PWM0, 0x80, TWL_PWM0_ON);
+
+	bl->props.state |= PANDORABL_WAS_OFF;
+	bl->props.brightness = MAX_USER_VALUE;
+	backlight_update_status(bl);
+
+	/* enable PWM function in pin mux */
+	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_PMBR1);
+	r &= ~TWL_PMBR1_PWM0_MUXMASK;
+	r |= TWL_PMBR1_PWM0;
+	twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_PMBR1);
+
+	return 0;
+}
+
+static int pandora_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	backlight_device_unregister(bl);
+	return 0;
+}
+
+static struct platform_driver pandora_backlight_driver = {
+	.driver		= {
+		.name	= "pandora-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pandora_backlight_probe,
+	.remove		= pandora_backlight_remove,
+};
+
+module_platform_driver(pandora_backlight_driver);
+
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("Pandora Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pandora-backlight");
-- 
cgit v1.2.3-70-g09d2


From 67a67272e890c79372bc0e2e555071f903d864a7 Mon Sep 17 00:00:00 2001
From: Jingoo Han <jg1.han@samsung.com>
Date: Fri, 23 Mar 2012 15:02:02 -0700
Subject: backlight: convert platform_lcd to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/platform_lcd.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c
index f0bf491ed08..b6672340d6c 100644
--- a/drivers/video/backlight/platform_lcd.c
+++ b/drivers/video/backlight/platform_lcd.c
@@ -121,9 +121,9 @@ static int __devexit platform_lcd_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int platform_lcd_suspend(struct platform_device *pdev, pm_message_t st)
+static int platform_lcd_suspend(struct device *dev)
 {
-	struct platform_lcd *plcd = platform_get_drvdata(pdev);
+	struct platform_lcd *plcd = dev_get_drvdata(dev);
 
 	plcd->suspended = 1;
 	platform_lcd_set_power(plcd->lcd, plcd->power);
@@ -131,29 +131,30 @@ static int platform_lcd_suspend(struct platform_device *pdev, pm_message_t st)
 	return 0;
 }
 
-static int platform_lcd_resume(struct platform_device *pdev)
+static int platform_lcd_resume(struct device *dev)
 {
-	struct platform_lcd *plcd = platform_get_drvdata(pdev);
+	struct platform_lcd *plcd = dev_get_drvdata(dev);
 
 	plcd->suspended = 0;
 	platform_lcd_set_power(plcd->lcd, plcd->power);
 
 	return 0;
 }
-#else
-#define platform_lcd_suspend NULL
-#define platform_lcd_resume NULL
+
+static SIMPLE_DEV_PM_OPS(platform_lcd_pm_ops, platform_lcd_suspend,
+			platform_lcd_resume);
 #endif
 
 static struct platform_driver platform_lcd_driver = {
 	.driver		= {
 		.name	= "platform-lcd",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &platform_lcd_pm_ops,
+#endif
 	},
 	.probe		= platform_lcd_probe,
 	.remove		= __devexit_p(platform_lcd_remove),
-	.suspend        = platform_lcd_suspend,
-	.resume         = platform_lcd_resume,
 };
 
 module_platform_driver(platform_lcd_driver);
-- 
cgit v1.2.3-70-g09d2


From 2df5e12900d847af9113980d015939dde0d1b1d4 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <rdunlap@xenotime.net>
Date: Fri, 23 Mar 2012 15:02:03 -0700
Subject: backlight: fix ot200_bl build

Fix build error when GPIO_CS5535 is not enabled:

  drivers/built-in.o: In function `ot200_backlight_probe':
  ot200_bl.c:(.text+0x205bf): undefined reference to `cs5535_gpio_set'
  ot200_bl.c:(.text+0x205d1): undefined reference to `cs5535_gpio_set'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index ed68fde5445..7ed9991fa74 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -343,7 +343,7 @@ config BACKLIGHT_LP855X
 
 config BACKLIGHT_OT200
 	tristate "Backlight driver for ot200 visualisation device"
-	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT
+	depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
 	help
 	  To compile this driver as a module, choose M here: the module will be
 	  called ot200_bl.
-- 
cgit v1.2.3-70-g09d2


From 70834d3070c3f3015ab5c05176d54bd4a0100546 Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@redhat.com>
Date: Fri, 23 Mar 2012 15:02:46 -0700
Subject: usermodehelper: use UMH_WAIT_PROC consistently

A few call_usermodehelper() callers use the hardcoded constant instead of
the proper UMH_WAIT_PROC, fix them.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/drbd/drbd_nl.c               | 2 +-
 drivers/staging/rtl8187se/r8180_core.c     | 2 +-
 drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 4 ++--
 drivers/video/uvesafb.c                    | 2 +-
 security/tomoyo/load_policy.c              | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index e09f9cebbb2..abfaacaaf34 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -179,7 +179,7 @@ int drbd_khelper(struct drbd_conf *mdev, char *cmd)
 	dev_info(DEV, "helper command: %s %s %s\n", usermode_helper, cmd, mb);
 
 	drbd_bcast_ev_helper(mdev, cmd);
-	ret = call_usermodehelper(usermode_helper, argv, envp, 1);
+	ret = call_usermodehelper(usermode_helper, argv, envp, UMH_WAIT_PROC);
 	if (ret)
 		dev_warn(DEV, "helper command: %s %s %s exit code %u (0x%x)\n",
 				usermode_helper, cmd, mb,
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index e4ade550cfe..4fe52f6b003 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -4159,7 +4159,7 @@ void GPIOChangeRFWorkItemCallBack(struct work_struct *work)
 		argv[0] = RadioPowerPath;
 		argv[2] = NULL;
 
-		call_usermodehelper(RadioPowerPath, argv, envp, 1);
+		call_usermodehelper(RadioPowerPath, argv, envp, UMH_WAIT_PROC);
 	}
 }
 
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index a7fa9aad6f2..f026b7171f6 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -208,7 +208,7 @@ static void dm_check_ac_dc_power(struct net_device *dev)
 
 	if (priv->rtllib->state != RTLLIB_LINKED)
 		return;
-	call_usermodehelper(ac_dc_check_script_path, argv, envp, 1);
+	call_usermodehelper(ac_dc_check_script_path, argv, envp, UMH_WAIT_PROC);
 
 	return;
 };
@@ -2296,7 +2296,7 @@ void dm_CheckRfCtrlGPIO(void *data)
 
 		argv[0] = RadioPowerPath;
 		argv[2] = NULL;
-		call_usermodehelper(RadioPowerPath, argv, envp, 1);
+		call_usermodehelper(RadioPowerPath, argv, envp, UMH_WAIT_PROC);
 	}
 }
 
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index 9db3de3a841..260cca7ddb4 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -121,7 +121,7 @@ static int uvesafb_helper_start(void)
 		NULL,
 	};
 
-	return call_usermodehelper(v86d_path, argv, envp, 1);
+	return call_usermodehelper(v86d_path, argv, envp, UMH_WAIT_PROC);
 }
 
 /*
diff --git a/security/tomoyo/load_policy.c b/security/tomoyo/load_policy.c
index 67975405140..078fac0bb4c 100644
--- a/security/tomoyo/load_policy.c
+++ b/security/tomoyo/load_policy.c
@@ -102,7 +102,7 @@ void tomoyo_load_policy(const char *filename)
 	envp[0] = "HOME=/";
 	envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
 	envp[2] = NULL;
-	call_usermodehelper(argv[0], argv, envp, 1);
+	call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
 	tomoyo_check_profile();
 }
 
-- 
cgit v1.2.3-70-g09d2


From 9ffc93f203c18a70623f21950f1dd473c9ec48cd Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 28 Mar 2012 18:30:03 +0100
Subject: Remove all #inclusions of asm/system.h

Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
---
 arch/um/include/asm/fixmap.h                            | 1 -
 drivers/acpi/processor_driver.c                         | 1 -
 drivers/atm/eni.c                                       | 1 -
 drivers/atm/firestream.c                                | 1 -
 drivers/atm/horizon.c                                   | 1 -
 drivers/atm/idt77105.c                                  | 1 -
 drivers/atm/iphase.c                                    | 1 -
 drivers/atm/suni.c                                      | 1 -
 drivers/atm/zatm.c                                      | 1 -
 drivers/block/floppy.c                                  | 1 -
 drivers/block/hd.c                                      | 1 -
 drivers/block/nbd.c                                     | 1 -
 drivers/block/xd.c                                      | 1 -
 drivers/bluetooth/bt3c_cs.c                             | 1 -
 drivers/bluetooth/btuart_cs.c                           | 1 -
 drivers/bluetooth/dtl1_cs.c                             | 1 -
 drivers/char/apm-emulation.c                            | 1 -
 drivers/char/ds1302.c                                   | 1 -
 drivers/char/efirtc.c                                   | 1 -
 drivers/char/genrtc.c                                   | 1 -
 drivers/char/hpet.c                                     | 1 -
 drivers/char/ipmi/ipmi_devintf.c                        | 1 -
 drivers/char/ipmi/ipmi_msghandler.c                     | 1 -
 drivers/char/ipmi/ipmi_si_intf.c                        | 1 -
 drivers/char/lp.c                                       | 1 -
 drivers/char/mbcs.c                                     | 1 -
 drivers/char/mspec.c                                    | 1 -
 drivers/char/mwave/3780i.c                              | 1 -
 drivers/char/nvram.c                                    | 1 -
 drivers/char/nwflash.c                                  | 1 -
 drivers/char/pcmcia/synclink_cs.c                       | 1 -
 drivers/char/rtc.c                                      | 1 -
 drivers/char/sonypi.c                                   | 1 -
 drivers/char/xilinx_hwicap/xilinx_hwicap.c              | 1 -
 drivers/cpufreq/omap-cpufreq.c                          | 1 -
 drivers/cpufreq/powernow-k7.c                           | 1 -
 drivers/firewire/core-cdev.c                            | 1 -
 drivers/firewire/core-device.c                          | 1 -
 drivers/firewire/core-topology.c                        | 1 -
 drivers/firewire/ohci.c                                 | 1 -
 drivers/firewire/sbp2.c                                 | 1 -
 drivers/i2c/busses/i2c-acorn.c                          | 1 -
 drivers/ide/ide-cs.c                                    | 1 -
 drivers/ide/qd65xx.c                                    | 1 -
 drivers/infiniband/hw/ehca/ehca_reqs.c                  | 1 -
 drivers/input/joydev.c                                  | 1 -
 drivers/input/joystick/amijoy.c                         | 1 -
 drivers/input/mouse/amimouse.c                          | 1 -
 drivers/input/mouse/atarimouse.c                        | 1 -
 drivers/input/serio/hp_sdc.c                            | 1 -
 drivers/input/serio/maceps2.c                           | 1 -
 drivers/input/serio/rpckbd.c                            | 1 -
 drivers/input/serio/sa1111ps2.c                         | 1 -
 drivers/isdn/hardware/avm/avm_cs.c                      | 1 -
 drivers/isdn/hisax/avma1_cs.c                           | 1 -
 drivers/isdn/hisax/elsa_cs.c                            | 1 -
 drivers/isdn/hisax/sedlbauer_cs.c                       | 1 -
 drivers/isdn/hisax/teles_cs.c                           | 1 -
 drivers/isdn/i4l/isdn_bsdcomp.c                         | 1 -
 drivers/isdn/pcbit/layer2.c                             | 1 -
 drivers/macintosh/macio-adb.c                           | 1 -
 drivers/macintosh/therm_adt746x.c                       | 1 -
 drivers/macintosh/therm_pm72.c                          | 1 -
 drivers/macintosh/therm_windtunnel.c                    | 1 -
 drivers/macintosh/via-cuda.c                            | 1 -
 drivers/macintosh/via-macii.c                           | 1 -
 drivers/macintosh/via-pmu.c                             | 1 -
 drivers/macintosh/via-pmu68k.c                          | 1 -
 drivers/macintosh/windfarm_lm75_sensor.c                | 1 -
 drivers/macintosh/windfarm_pm121.c                      | 1 -
 drivers/macintosh/windfarm_pm81.c                       | 1 -
 drivers/macintosh/windfarm_pm91.c                       | 1 -
 drivers/macintosh/windfarm_smu_controls.c               | 1 -
 drivers/macintosh/windfarm_smu_sensors.c                | 1 -
 drivers/media/dvb/dvb-core/dmxdev.c                     | 1 -
 drivers/media/dvb/firewire/firedtv-fw.c                 | 1 -
 drivers/media/dvb/ttpci/av7110.c                        | 1 -
 drivers/media/media-devnode.c                           | 1 -
 drivers/media/video/ivtv/ivtv-driver.h                  | 1 -
 drivers/media/video/v4l2-common.c                       | 1 -
 drivers/media/video/v4l2-dev.c                          | 1 -
 drivers/message/i2o/i2o_scsi.c                          | 1 -
 drivers/mfd/mcp-core.c                                  | 1 -
 drivers/mfd/mcp-sa11x0.c                                | 1 -
 drivers/misc/sgi-xp/xp.h                                | 1 -
 drivers/mmc/card/block.c                                | 1 -
 drivers/mtd/devices/pmc551.c                            | 1 -
 drivers/mtd/devices/slram.c                             | 1 -
 drivers/mtd/maps/pcmciamtd.c                            | 1 -
 drivers/mtd/nand/bcm_umi_nand.c                         | 1 -
 drivers/net/appletalk/cops.c                            | 1 -
 drivers/net/appletalk/ltpc.c                            | 1 -
 drivers/net/arcnet/com20020_cs.c                        | 1 -
 drivers/net/bonding/bond_main.c                         | 1 -
 drivers/net/can/slcan.c                                 | 1 -
 drivers/net/cris/eth_v10.c                              | 1 -
 drivers/net/ethernet/3com/3c574_cs.c                    | 1 -
 drivers/net/ethernet/3com/3c589_cs.c                    | 1 -
 drivers/net/ethernet/8390/3c503.c                       | 1 -
 drivers/net/ethernet/8390/ac3200.c                      | 1 -
 drivers/net/ethernet/8390/apne.c                        | 1 -
 drivers/net/ethernet/8390/ax88796.c                     | 1 -
 drivers/net/ethernet/8390/axnet_cs.c                    | 1 -
 drivers/net/ethernet/8390/e2100.c                       | 1 -
 drivers/net/ethernet/8390/es3210.c                      | 1 -
 drivers/net/ethernet/8390/etherh.c                      | 1 -
 drivers/net/ethernet/8390/hp-plus.c                     | 1 -
 drivers/net/ethernet/8390/hp.c                          | 1 -
 drivers/net/ethernet/8390/lib8390.c                     | 1 -
 drivers/net/ethernet/8390/lne390.c                      | 1 -
 drivers/net/ethernet/8390/mac8390.c                     | 1 -
 drivers/net/ethernet/8390/ne-h8300.c                    | 1 -
 drivers/net/ethernet/8390/ne.c                          | 1 -
 drivers/net/ethernet/8390/ne2.c                         | 1 -
 drivers/net/ethernet/8390/ne2k-pci.c                    | 1 -
 drivers/net/ethernet/8390/ne3210.c                      | 1 -
 drivers/net/ethernet/8390/pcnet_cs.c                    | 1 -
 drivers/net/ethernet/8390/smc-mca.c                     | 1 -
 drivers/net/ethernet/8390/smc-ultra.c                   | 1 -
 drivers/net/ethernet/8390/smc-ultra32.c                 | 1 -
 drivers/net/ethernet/8390/stnic.c                       | 1 -
 drivers/net/ethernet/8390/wd.c                          | 1 -
 drivers/net/ethernet/8390/zorro8390.c                   | 1 -
 drivers/net/ethernet/alteon/acenic.c                    | 1 -
 drivers/net/ethernet/amd/7990.c                         | 1 -
 drivers/net/ethernet/amd/am79c961a.c                    | 1 -
 drivers/net/ethernet/amd/amd8111e.c                     | 1 -
 drivers/net/ethernet/amd/declance.c                     | 1 -
 drivers/net/ethernet/amd/hplance.c                      | 1 -
 drivers/net/ethernet/amd/mvme147.c                      | 1 -
 drivers/net/ethernet/amd/nmclan_cs.c                    | 1 -
 drivers/net/ethernet/amd/sunlance.c                     | 1 -
 drivers/net/ethernet/broadcom/tg3.c                     | 1 -
 drivers/net/ethernet/cirrus/cs89x0.c                    | 1 -
 drivers/net/ethernet/cirrus/mac89x0.c                   | 1 -
 drivers/net/ethernet/dlink/de600.c                      | 1 -
 drivers/net/ethernet/dlink/de620.c                      | 1 -
 drivers/net/ethernet/fujitsu/at1700.c                   | 1 -
 drivers/net/ethernet/fujitsu/eth16i.c                   | 1 -
 drivers/net/ethernet/fujitsu/fmvj18x_cs.c               | 1 -
 drivers/net/ethernet/i825xx/3c507.c                     | 1 -
 drivers/net/ethernet/i825xx/3c527.c                     | 1 -
 drivers/net/ethernet/i825xx/eepro.c                     | 1 -
 drivers/net/ethernet/i825xx/eexpress.c                  | 1 -
 drivers/net/ethernet/i825xx/ether1.c                    | 1 -
 drivers/net/ethernet/i825xx/znet.c                      | 1 -
 drivers/net/ethernet/korina.c                           | 1 -
 drivers/net/ethernet/marvell/mv643xx_eth.c              | 1 -
 drivers/net/ethernet/marvell/pxa168_eth.c               | 1 -
 drivers/net/ethernet/natsemi/jazzsonic.c                | 1 -
 drivers/net/ethernet/natsemi/macsonic.c                 | 1 -
 drivers/net/ethernet/natsemi/ns83820.c                  | 1 -
 drivers/net/ethernet/neterion/s2io.c                    | 1 -
 drivers/net/ethernet/nvidia/forcedeth.c                 | 1 -
 drivers/net/ethernet/realtek/atp.c                      | 1 -
 drivers/net/ethernet/realtek/r8169.c                    | 1 -
 drivers/net/ethernet/seeq/ether3.c                      | 1 -
 drivers/net/ethernet/seeq/seeq8005.c                    | 1 -
 drivers/net/ethernet/smsc/smc91c92_cs.c                 | 1 -
 drivers/net/ethernet/sun/cassini.c                      | 1 -
 drivers/net/ethernet/sun/sunbmac.c                      | 1 -
 drivers/net/ethernet/sun/sungem.c                       | 1 -
 drivers/net/ethernet/sun/sunhme.c                       | 1 -
 drivers/net/ethernet/sun/sunqe.c                        | 1 -
 drivers/net/ethernet/tundra/tsi108_eth.c                | 1 -
 drivers/net/ethernet/xircom/xirc2ps_cs.c                | 1 -
 drivers/net/hamradio/6pack.c                            | 1 -
 drivers/net/hamradio/baycom_par.c                       | 1 -
 drivers/net/hamradio/bpqether.c                         | 1 -
 drivers/net/hamradio/mkiss.c                            | 1 -
 drivers/net/hamradio/scc.c                              | 1 -
 drivers/net/hamradio/yam.c                              | 1 -
 drivers/net/hippi/rrunner.c                             | 1 -
 drivers/net/irda/donauboe.c                             | 1 -
 drivers/net/loopback.c                                  | 1 -
 drivers/net/plip/plip.c                                 | 1 -
 drivers/net/slip/slhc.c                                 | 1 -
 drivers/net/slip/slip.c                                 | 1 -
 drivers/net/tokenring/3c359.c                           | 1 -
 drivers/net/tokenring/abyss.c                           | 1 -
 drivers/net/tokenring/ibmtr_cs.c                        | 1 -
 drivers/net/tokenring/lanstreamer.c                     | 1 -
 drivers/net/tokenring/madgemc.c                         | 1 -
 drivers/net/tokenring/olympic.c                         | 1 -
 drivers/net/tokenring/proteon.c                         | 1 -
 drivers/net/tokenring/skisa.c                           | 1 -
 drivers/net/tokenring/smctr.c                           | 1 -
 drivers/net/tokenring/tms380tr.c                        | 1 -
 drivers/net/tokenring/tmspci.c                          | 1 -
 drivers/net/tun.c                                       | 1 -
 drivers/net/wan/dlci.c                                  | 1 -
 drivers/net/wan/dscc4.c                                 | 1 -
 drivers/net/wan/hd64570.c                               | 1 -
 drivers/net/wan/hd64572.c                               | 1 -
 drivers/net/wan/lapbether.c                             | 1 -
 drivers/net/wan/sdla.c                                  | 1 -
 drivers/net/wan/x25_asy.c                               | 1 -
 drivers/net/wireless/airo.c                             | 1 -
 drivers/net/wireless/airo_cs.c                          | 1 -
 drivers/net/wireless/atmel.c                            | 1 -
 drivers/net/wireless/atmel_cs.c                         | 1 -
 drivers/net/wireless/prism54/islpci_mgt.c               | 1 -
 drivers/net/wireless/ray_cs.c                           | 1 -
 drivers/net/wireless/wl3501_cs.c                        | 1 -
 drivers/nubus/nubus.c                                   | 1 -
 drivers/parisc/dino.c                                   | 1 -
 drivers/parisc/iosapic.c                                | 1 -
 drivers/parisc/lba_pci.c                                | 1 -
 drivers/pcmcia/cs.c                                     | 1 -
 drivers/pcmcia/i82092.c                                 | 1 -
 drivers/pcmcia/i82365.c                                 | 1 -
 drivers/pcmcia/m32r_cfc.c                               | 1 -
 drivers/pcmcia/m32r_pcc.c                               | 1 -
 drivers/pcmcia/m8xx_pcmcia.c                            | 1 -
 drivers/pcmcia/pd6729.c                                 | 1 -
 drivers/pcmcia/pxa2xx_base.c                            | 1 -
 drivers/pcmcia/sa11xx_base.c                            | 1 -
 drivers/pcmcia/soc_common.c                             | 1 -
 drivers/pcmcia/socket_sysfs.c                           | 1 -
 drivers/pcmcia/tcic.c                                   | 1 -
 drivers/pcmcia/xxs1500_ss.c                             | 1 -
 drivers/pnp/pnpbios/bioscalls.c                         | 1 -
 drivers/pnp/pnpbios/core.c                              | 1 -
 drivers/s390/crypto/ap_bus.c                            | 1 -
 drivers/sbus/char/flash.c                               | 1 -
 drivers/sbus/char/openprom.c                            | 1 -
 drivers/sbus/char/uctrl.c                               | 1 -
 drivers/scsi/53c700.c                                   | 1 -
 drivers/scsi/BusLogic.c                                 | 1 -
 drivers/scsi/advansys.c                                 | 1 -
 drivers/scsi/aha152x.c                                  | 1 -
 drivers/scsi/aha1542.c                                  | 1 -
 drivers/scsi/aha1740.c                                  | 1 -
 drivers/scsi/arcmsr/arcmsr_hba.c                        | 1 -
 drivers/scsi/arm/acornscsi.c                            | 1 -
 drivers/scsi/arm/cumana_1.c                             | 1 -
 drivers/scsi/arm/oak.c                                  | 1 -
 drivers/scsi/atp870u.c                                  | 1 -
 drivers/scsi/dtc.c                                      | 1 -
 drivers/scsi/fd_mcs.c                                   | 1 -
 drivers/scsi/fdomain.c                                  | 1 -
 drivers/scsi/g_NCR5380.c                                | 1 -
 drivers/scsi/gdth.c                                     | 1 -
 drivers/scsi/ibmmca.c                                   | 1 -
 drivers/scsi/in2000.c                                   | 1 -
 drivers/scsi/mac53c94.c                                 | 1 -
 drivers/scsi/mac_scsi.c                                 | 1 -
 drivers/scsi/mesh.c                                     | 1 -
 drivers/scsi/ncr53c8xx.c                                | 1 -
 drivers/scsi/nsp32.c                                    | 1 -
 drivers/scsi/osst.c                                     | 1 -
 drivers/scsi/pas16.c                                    | 1 -
 drivers/scsi/qla1280.c                                  | 1 -
 drivers/scsi/qlogicpti.c                                | 1 -
 drivers/scsi/st.c                                       | 1 -
 drivers/scsi/sun3_scsi.c                                | 1 -
 drivers/scsi/sun3_scsi_vme.c                            | 1 -
 drivers/scsi/sym53c416.c                                | 1 -
 drivers/scsi/t128.c                                     | 1 -
 drivers/scsi/u14-34f.c                                  | 1 -
 drivers/scsi/ultrastor.c                                | 1 -
 drivers/scsi/wd7000.c                                   | 1 -
 drivers/spi/spi-omap-uwire.c                            | 1 -
 drivers/staging/comedi/drivers.c                        | 1 -
 drivers/staging/comedi/drivers/cb_pcidas64.c            | 1 -
 drivers/staging/comedi/drivers/mite.c                   | 1 -
 drivers/staging/crystalhd/crystalhd.h                   | 1 -
 drivers/staging/crystalhd/crystalhd_lnx.h               | 1 -
 drivers/staging/crystalhd/crystalhd_misc.h              | 1 +
 drivers/staging/et131x/et131x.c                         | 1 -
 drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c        | 1 -
 drivers/staging/media/go7007/go7007-driver.c            | 1 -
 drivers/staging/media/go7007/go7007-i2c.c               | 1 -
 drivers/staging/media/go7007/go7007-v4l2.c              | 1 -
 drivers/staging/media/go7007/snd-go7007.c               | 1 -
 drivers/staging/media/lirc/lirc_serial.c                | 1 -
 drivers/staging/media/lirc/lirc_sir.c                   | 1 -
 drivers/staging/panel/panel.c                           | 1 -
 drivers/staging/sbe-2t3e3/io.c                          | 1 -
 drivers/staging/telephony/phonedev.c                    | 1 -
 drivers/staging/tidspbridge/include/dspbridge/host_os.h | 1 -
 drivers/staging/wlags49_h2/wl_cs.c                      | 1 -
 drivers/staging/wlags49_h2/wl_main.c                    | 3 +--
 drivers/staging/wlags49_h2/wl_netdev.c                  | 3 +--
 drivers/staging/wlags49_h2/wl_pci.c                     | 1 -
 drivers/staging/wlags49_h2/wl_util.c                    | 3 +--
 drivers/tty/amiserial.c                                 | 1 -
 drivers/tty/isicom.c                                    | 1 -
 drivers/tty/moxa.c                                      | 1 -
 drivers/tty/mxser.c                                     | 1 -
 drivers/tty/n_hdlc.c                                    | 1 -
 drivers/tty/n_tty.c                                     | 1 -
 drivers/tty/pty.c                                       | 1 -
 drivers/tty/serial/68328serial.c                        | 1 -
 drivers/tty/serial/8250/serial_cs.c                     | 1 -
 drivers/tty/serial/crisv10.c                            | 1 -
 drivers/tty/serial/dz.c                                 | 1 -
 drivers/tty/serial/icom.c                               | 1 -
 drivers/tty/serial/msm_serial_hs.c                      | 1 -
 drivers/tty/serial/zs.c                                 | 1 -
 drivers/tty/synclink.c                                  | 1 -
 drivers/tty/synclink_gt.c                               | 1 -
 drivers/tty/synclinkmp.c                                | 1 -
 drivers/tty/tty_io.c                                    | 1 -
 drivers/tty/tty_ioctl.c                                 | 1 -
 drivers/tty/vt/vt.c                                     | 1 -
 drivers/usb/gadget/amd5536udc.c                         | 1 -
 drivers/usb/gadget/at91_udc.c                           | 1 -
 drivers/usb/gadget/dummy_hcd.c                          | 1 -
 drivers/usb/gadget/fsl_udc_core.c                       | 1 -
 drivers/usb/gadget/goku_udc.c                           | 1 -
 drivers/usb/gadget/langwell_udc.c                       | 1 -
 drivers/usb/gadget/mv_udc_core.c                        | 1 -
 drivers/usb/gadget/net2272.c                            | 1 -
 drivers/usb/gadget/net2280.c                            | 1 -
 drivers/usb/gadget/omap_udc.c                           | 1 -
 drivers/usb/gadget/printer.c                            | 1 -
 drivers/usb/gadget/pxa25x_udc.c                         | 1 -
 drivers/usb/gadget/rndis.c                              | 1 -
 drivers/usb/gadget/s3c2410_udc.c                        | 1 -
 drivers/usb/host/ehci-hcd.c                             | 1 -
 drivers/usb/host/isp116x-hcd.c                          | 1 -
 drivers/usb/host/isp1362-hcd.c                          | 1 -
 drivers/usb/host/ohci-hcd.c                             | 1 -
 drivers/usb/host/oxu210hp-hcd.c                         | 1 -
 drivers/usb/host/sl811-hcd.c                            | 1 -
 drivers/usb/host/u132-hcd.c                             | 1 -
 drivers/usb/host/uhci-hcd.c                             | 1 -
 drivers/video/amifb.c                                   | 1 -
 drivers/video/bt431.h                                   | 1 -
 drivers/video/bt455.h                                   | 1 -
 drivers/video/console/fbcon.c                           | 1 -
 drivers/video/console/newport_con.c                     | 1 -
 drivers/video/cyber2000fb.c                             | 1 -
 drivers/video/dnfb.c                                    | 1 -
 drivers/video/neofb.c                                   | 1 -
 drivers/video/pmag-ba-fb.c                              | 1 -
 drivers/video/pmagb-b-fb.c                              | 1 -
 drivers/video/q40fb.c                                   | 1 -
 drivers/video/savage/savagefb_driver.c                  | 1 -
 drivers/virtio/config.c                                 | 1 -
 drivers/watchdog/advantechwdt.c                         | 1 -
 drivers/watchdog/alim7101_wdt.c                         | 1 -
 drivers/watchdog/booke_wdt.c                            | 1 -
 drivers/watchdog/eurotechwdt.c                          | 1 -
 drivers/watchdog/ib700wdt.c                             | 1 -
 drivers/watchdog/it87_wdt.c                             | 1 -
 drivers/watchdog/machzwd.c                              | 1 -
 drivers/watchdog/pc87413_wdt.c                          | 1 -
 drivers/watchdog/sbc60xxwdt.c                           | 1 -
 drivers/watchdog/sbc7240_wdt.c                          | 1 -
 drivers/watchdog/sbc8360.c                              | 1 -
 drivers/watchdog/sbc_fitpc2_wdt.c                       | 1 -
 drivers/watchdog/sc520_wdt.c                            | 1 -
 drivers/watchdog/smsc37b787_wdt.c                       | 1 -
 drivers/watchdog/w83627hf_wdt.c                         | 1 -
 drivers/watchdog/w83697hf_wdt.c                         | 1 -
 drivers/watchdog/w83697ug_wdt.c                         | 1 -
 drivers/watchdog/w83877f_wdt.c                          | 1 -
 drivers/watchdog/w83977f_wdt.c                          | 1 -
 drivers/watchdog/wdt.c                                  | 1 -
 drivers/watchdog/wdt977.c                               | 1 -
 drivers/watchdog/wdt_pci.c                              | 1 -
 fs/binfmt_aout.c                                        | 1 -
 fs/binfmt_flat.c                                        | 1 -
 fs/coda/inode.c                                         | 1 -
 fs/coda/psdev.c                                         | 1 -
 fs/coda/upcall.c                                        | 1 -
 fs/eventpoll.c                                          | 1 -
 fs/jbd2/commit.c                                        | 1 -
 fs/jbd2/journal.c                                       | 1 -
 fs/ncpfs/file.c                                         | 1 -
 fs/ncpfs/inode.c                                        | 1 -
 fs/ncpfs/mmap.c                                         | 1 -
 fs/nfs/client.c                                         | 1 -
 fs/nfs/direct.c                                         | 1 -
 fs/nfs/file.c                                           | 1 -
 fs/nfs/getroot.c                                        | 1 -
 fs/nfs/inode.c                                          | 1 -
 fs/nfs/read.c                                           | 1 -
 fs/nfs/super.c                                          | 1 -
 fs/proc/inode.c                                         | 1 -
 fs/reiserfs/journal.c                                   | 1 -
 fs/ufs/inode.c                                          | 1 -
 fs/ufs/super.c                                          | 1 -
 fs/xfs/xfs_buf.h                                        | 1 -
 include/acpi/platform/aclinux.h                         | 1 -
 include/asm-generic/atomic.h                            | 1 -
 include/linux/cnt32_to_63.h                             | 1 -
 include/linux/debug_locks.h                             | 1 -
 include/linux/efi.h                                     | 1 -
 include/linux/ide.h                                     | 1 -
 include/linux/interrupt.h                               | 1 -
 include/linux/lsm_audit.h                               | 1 -
 include/linux/mtd/map.h                                 | 1 -
 include/linux/parport.h                                 | 1 -
 include/linux/rwsem.h                                   | 1 -
 include/linux/sched.h                                   | 1 -
 include/linux/skbuff.h                                  | 1 -
 include/linux/spinlock.h                                | 1 -
 include/linux/stop_machine.h                            | 1 -
 include/linux/tty.h                                     | 1 -
 include/linux/wait.h                                    | 1 -
 kernel/debug/debug_core.c                               | 1 -
 kernel/debug/kdb/kdb_bt.c                               | 1 -
 kernel/dma.c                                            | 1 -
 kernel/kexec.c                                          | 1 -
 kernel/rwsem.c                                          | 1 -
 kernel/sysctl.c                                         | 1 -
 lib/llist.c                                             | 1 -
 lib/raid6/altivec.uc                                    | 1 -
 net/802/fc.c                                            | 1 -
 net/802/fddi.c                                          | 1 -
 net/802/hippi.c                                         | 1 -
 net/802/tr.c                                            | 1 -
 net/atm/clip.c                                          | 1 -
 net/ax25/af_ax25.c                                      | 1 -
 net/ax25/ax25_addr.c                                    | 1 -
 net/ax25/ax25_dev.c                                     | 1 -
 net/ax25/ax25_ds_in.c                                   | 1 -
 net/ax25/ax25_ds_subr.c                                 | 1 -
 net/ax25/ax25_ds_timer.c                                | 1 -
 net/ax25/ax25_iface.c                                   | 1 -
 net/ax25/ax25_in.c                                      | 1 -
 net/ax25/ax25_ip.c                                      | 1 -
 net/ax25/ax25_out.c                                     | 1 -
 net/ax25/ax25_route.c                                   | 1 -
 net/ax25/ax25_std_in.c                                  | 1 -
 net/ax25/ax25_std_subr.c                                | 1 -
 net/ax25/ax25_std_timer.c                               | 1 -
 net/ax25/ax25_subr.c                                    | 1 -
 net/ax25/ax25_timer.c                                   | 1 -
 net/ax25/ax25_uid.c                                     | 1 -
 net/bluetooth/bnep/sock.c                               | 1 -
 net/bluetooth/cmtp/sock.c                               | 1 -
 net/bluetooth/hci_conn.c                                | 1 -
 net/bluetooth/hci_core.c                                | 1 -
 net/bluetooth/hci_event.c                               | 1 -
 net/bluetooth/hci_sock.c                                | 1 -
 net/bluetooth/l2cap_core.c                              | 1 -
 net/bluetooth/rfcomm/sock.c                             | 1 -
 net/bluetooth/sco.c                                     | 1 -
 net/core/datagram.c                                     | 1 -
 net/core/dev.c                                          | 1 -
 net/core/filter.c                                       | 1 -
 net/core/gen_estimator.c                                | 1 -
 net/core/rtnetlink.c                                    | 1 -
 net/core/scm.c                                          | 1 -
 net/core/skbuff.c                                       | 1 -
 net/core/sock.c                                         | 1 -
 net/core/utils.c                                        | 1 -
 net/decnet/af_decnet.c                                  | 1 -
 net/decnet/dn_dev.c                                     | 1 -
 net/decnet/dn_nsp_in.c                                  | 1 -
 net/decnet/dn_nsp_out.c                                 | 1 -
 net/econet/af_econet.c                                  | 1 -
 net/ethernet/eth.c                                      | 1 -
 net/ipv4/af_inet.c                                      | 1 -
 net/ipv4/arp.c                                          | 1 -
 net/ipv4/devinet.c                                      | 1 -
 net/ipv4/fib_frontend.c                                 | 1 -
 net/ipv4/fib_semantics.c                                | 1 -
 net/ipv4/fib_trie.c                                     | 1 -
 net/ipv4/icmp.c                                         | 1 -
 net/ipv4/igmp.c                                         | 1 -
 net/ipv4/ip_input.c                                     | 1 -
 net/ipv4/ip_output.c                                    | 1 -
 net/ipv4/ipmr.c                                         | 1 -
 net/ipv4/ping.c                                         | 1 -
 net/ipv4/route.c                                        | 1 -
 net/ipv4/udp.c                                          | 1 -
 net/ipv6/af_inet6.c                                     | 1 -
 net/ipv6/icmp.c                                         | 1 -
 net/ipv6/ip6mr.c                                        | 1 -
 net/irda/irlan/irlan_client.c                           | 1 -
 net/irda/irlan/irlan_common.c                           | 1 -
 net/irda/irlan/irlan_provider.c                         | 1 -
 net/irda/timer.c                                        | 1 -
 net/lapb/lapb_iface.c                                   | 1 -
 net/lapb/lapb_in.c                                      | 1 -
 net/lapb/lapb_out.c                                     | 1 -
 net/lapb/lapb_subr.c                                    | 1 -
 net/lapb/lapb_timer.c                                   | 1 -
 net/netfilter/ipvs/ip_vs_app.c                          | 1 -
 net/netfilter/ipvs/ip_vs_proto.c                        | 1 -
 net/netfilter/nfnetlink.c                               | 1 -
 net/netrom/af_netrom.c                                  | 1 -
 net/netrom/nr_dev.c                                     | 1 -
 net/netrom/nr_in.c                                      | 1 -
 net/netrom/nr_out.c                                     | 1 -
 net/netrom/nr_route.c                                   | 1 -
 net/netrom/nr_subr.c                                    | 1 -
 net/netrom/nr_timer.c                                   | 1 -
 net/openvswitch/datapath.c                              | 1 -
 net/packet/af_packet.c                                  | 1 -
 net/rose/af_rose.c                                      | 1 -
 net/rose/rose_dev.c                                     | 1 -
 net/rose/rose_in.c                                      | 1 -
 net/rose/rose_link.c                                    | 1 -
 net/rose/rose_out.c                                     | 1 -
 net/rose/rose_route.c                                   | 1 -
 net/rose/rose_subr.c                                    | 1 -
 net/rose/rose_timer.c                                   | 1 -
 net/sunrpc/clnt.c                                       | 1 -
 security/selinux/include/avc.h                          | 1 -
 sound/oss/os.h                                          | 1 -
 sound/oss/vidc.c                                        | 1 -
 sound/oss/waveartist.c                                  | 1 -
 sound/pci/asihpi/hpios.h                                | 1 -
 sound/pci/aw2/aw2-saa7146.c                             | 1 -
 510 files changed, 4 insertions(+), 512 deletions(-)

(limited to 'drivers/video')

diff --git a/arch/um/include/asm/fixmap.h b/arch/um/include/asm/fixmap.h
index 69c0252345f..21a423bae5e 100644
--- a/arch/um/include/asm/fixmap.h
+++ b/arch/um/include/asm/fixmap.h
@@ -2,7 +2,6 @@
 #define __UM_FIXMAP_H
 
 #include <asm/processor.h>
-#include <asm/system.h>
 #include <asm/kmap_types.h>
 #include <asm/archparam.h>
 #include <asm/page.h>
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 2801b418d7b..d4d9cb7e016 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -46,7 +46,6 @@
 #include <linux/slab.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/cpu.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 6ff612d099c..2059ee460b0 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -19,7 +19,6 @@
 #include <linux/atm_eni.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
 #include <asm/uaccess.h>
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 5072f8ac16f..86fed1b9169 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -49,7 +49,6 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/string.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index b81210330ac..75fd691cd43 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -43,7 +43,6 @@
 #include <linux/wait.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
 #include <asm/uaccess.h>
diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c
index 487a5473985..45d506363ab 100644
--- a/drivers/atm/idt77105.c
+++ b/drivers/atm/idt77105.c
@@ -16,7 +16,6 @@
 #include <linux/atm_idt77105.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <asm/param.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 9e373ba2030..d4386019af5 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -56,7 +56,6 @@
 #include <linux/interrupt.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
-#include <asm/system.h>  
 #include <asm/io.h>  
 #include <linux/atomic.h>
 #include <asm/uaccess.h>  
diff --git a/drivers/atm/suni.c b/drivers/atm/suni.c
index 90f1ccca9e5..02159345566 100644
--- a/drivers/atm/suni.c
+++ b/drivers/atm/suni.c
@@ -22,7 +22,6 @@
 #include <linux/capability.h>
 #include <linux/atm_suni.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <asm/param.h>
 #include <asm/uaccess.h>
 #include <linux/atomic.h>
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index d889f56e8d8..abe4e20b076 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -24,7 +24,6 @@
 #include <linux/wait.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/string.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 744f078f4dd..76a08236430 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -202,7 +202,6 @@ static int slow_floppy;
 
 #include <asm/dma.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 static int FLOPPY_IRQ = 6;
 static int FLOPPY_DMA = 2;
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index b52c9ca146f..bf397bf108b 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -44,7 +44,6 @@
 #define HD_IRQ 14
 
 #define REALLY_SLOW_IO
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index c3f0ee16594..c7ba11f9b20 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -34,7 +34,6 @@
 #include <linux/kthread.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/types.h>
 
 #include <linux/nbd.h>
diff --git a/drivers/block/xd.c b/drivers/block/xd.c
index 51a972704db..ff540520bad 100644
--- a/drivers/block/xd.c
+++ b/drivers/block/xd.c
@@ -52,7 +52,6 @@
 #include <linux/io.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/dma.h>
 
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 9c09d6f05dc..308c8599ab5 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -39,7 +39,6 @@
 #include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/bitops.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <linux/device.h>
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 194224d07f7..c4fc2f3fc32 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -38,7 +38,6 @@
 #include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/bitops.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <pcmcia/cistpl.h>
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 049c0594a76..6e8d9618968 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -38,7 +38,6 @@
 #include <linux/serial.h>
 #include <linux/serial_reg.h>
 #include <linux/bitops.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <pcmcia/cistpl.h>
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index f4837a893df..57501ca9204 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -31,7 +31,6 @@
 #include <linux/kthread.h>
 #include <linux/delay.h>
 
-#include <asm/system.h>
 
 /*
  * The apm_bios device is one of the misc char devices.
diff --git a/drivers/char/ds1302.c b/drivers/char/ds1302.c
index ed8303f9890..7d34b203718 100644
--- a/drivers/char/ds1302.c
+++ b/drivers/char/ds1302.c
@@ -24,7 +24,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 #include <asm/rtc.h>
 #if defined(CONFIG_M32R)
 #include <asm/m32r.h>
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 53c524e7b82..a082d00b0f1 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -37,7 +37,6 @@
 #include <linux/efi.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define EFI_RTC_VERSION		"0.4"
 
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index f773a9dd14f..21cb980f115 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -56,7 +56,6 @@
 #include <linux/workqueue.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/rtc.h>
 
 /*
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 0833896cf6f..3845ab44c33 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -36,7 +36,6 @@
 #include <linux/io.h>
 
 #include <asm/current.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
 
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 2aa3977aae5..9eb360ff8ca 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/errno.h>
-#include <asm/system.h>
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 58c0e6387cf..c90e9390b78 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -33,7 +33,6 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
-#include <asm/system.h>
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 50fcf9c0456..f9fdc114b31 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -41,7 +41,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <asm/system.h>
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/timer.h>
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index f4348560706..0fbf1a776b5 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -135,7 +135,6 @@
 
 #include <asm/irq.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 /* if you have more than 8 printers, remember to increase LP_NO */
 #define LP_NO 8
diff --git a/drivers/char/mbcs.c b/drivers/char/mbcs.c
index 1aeaaba680d..47ff7e470d8 100644
--- a/drivers/char/mbcs.c
+++ b/drivers/char/mbcs.c
@@ -28,7 +28,6 @@
 #include <linux/slab.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/intr.h>
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 5c0d96a820f..8b78750f1ef 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -44,7 +44,6 @@
 #include <linux/slab.h>
 #include <linux/numa.h>
 #include <asm/page.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <linux/atomic.h>
 #include <asm/tlbflush.h>
diff --git a/drivers/char/mwave/3780i.c b/drivers/char/mwave/3780i.c
index 492dbfb2efd..881c9e59593 100644
--- a/drivers/char/mwave/3780i.c
+++ b/drivers/char/mwave/3780i.c
@@ -56,7 +56,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include "smapi.h"
 #include "mwavedd.h"
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index eaade8a1ecd..9df78e2cc45 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -111,7 +111,6 @@
 #include <linux/uaccess.h>
 #include <linux/mutex.h>
 
-#include <asm/system.h>
 
 static DEFINE_MUTEX(nvram_mutex);
 static DEFINE_SPINLOCK(nvram_state_lock);
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index bf586ae1ee8..d45c3345b4a 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -32,7 +32,6 @@
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 /*****************************************************************************/
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index f6453df4921..0a484b4a1b0 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -60,7 +60,6 @@
 #include <linux/ioctl.h>
 #include <linux/synclink.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index 872e09a02d2..af9437488b6 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -83,7 +83,6 @@
 #include <linux/ratelimit.h>
 
 #include <asm/current.h>
-#include <asm/system.h>
 
 #ifdef CONFIG_X86
 #include <asm/hpet.h>
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 1ee8ce7d276..45713f0e7d6 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -54,7 +54,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <linux/sonypi.h>
 
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index e90e1c74fd4..31ba11ca75e 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -89,7 +89,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #ifdef CONFIG_OF
 /* For open firmware. */
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 5d04c57aae3..3093ca6152c 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -26,7 +26,6 @@
 #include <linux/cpu.h>
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <asm/smp_plat.h>
 #include <asm/cpu.h>
 
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index cf7e1ee005a..334cc2f1e9f 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -27,7 +27,6 @@
 
 #include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
 #include <asm/msr.h>
-#include <asm/system.h>
 #include <asm/cpu_device_id.h>
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 22c6df5f136..2e6b24547e2 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -44,7 +44,6 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 
-#include <asm/system.h>
 
 #include "core.h"
 
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index afa7c83bd11..68109e9bb04 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -40,7 +40,6 @@
 
 #include <linux/atomic.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 
 #include "core.h"
 
diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
index 255646ffc35..0de83508f32 100644
--- a/drivers/firewire/core-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -31,7 +31,6 @@
 
 #include <linux/atomic.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 
 #include "core.h"
 
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 187b3f2e797..2b5460075a9 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -46,7 +46,6 @@
 
 #include <asm/byteorder.h>
 #include <asm/page.h>
-#include <asm/system.h>
 
 #ifdef CONFIG_PPC_PMAC
 #include <asm/pmac_feature.h>
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 000a29ffeda..b7e65d7eab6 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -52,7 +52,6 @@
 #include <linux/workqueue.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 86796488ef4..ed9f48d566d 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -19,7 +19,6 @@
 
 #include <mach/hardware.h>
 #include <asm/hardware/ioc.h>
-#include <asm/system.h>
 
 #define FORCE_ONES	0xdc
 #define SCL		0x02
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index d2f3db3cf3e..28e344ea514 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -41,7 +41,6 @@
 #include <linux/major.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index 8bbfe5557c7..e03f4f19c1d 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -29,7 +29,6 @@
 #include <linux/blkdev.h>
 #include <linux/ide.h>
 #include <linux/init.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #define DRV_NAME "qd65xx"
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 9a3fbfca9b4..fd05f48f6b0 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -42,7 +42,6 @@
  */
 
 
-#include <asm/system.h>
 #include "ehca_classes.h"
 #include "ehca_tools.h"
 #include "ehca_qes.h"
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index c24ec2d5f92..26043cc6a01 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -13,7 +13,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/joystick.h>
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index 0bc86204213..24044dacbf7 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -35,7 +35,6 @@
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 
-#include <asm/system.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
 
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index ff5f61a0fd3..5fa99341a39 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -25,7 +25,6 @@
 
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index 5c4a692bf73..d1c43236b12 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -47,7 +47,6 @@
 
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/atarihw.h>
 #include <asm/atarikb.h>
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index be3316073ae..09a089996de 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -71,7 +71,6 @@
 #include <linux/slab.h>
 #include <linux/hil.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /* Machine-specific abstraction */
 
diff --git a/drivers/input/serio/maceps2.c b/drivers/input/serio/maceps2.c
index 558200e96d0..61da763b120 100644
--- a/drivers/input/serio/maceps2.c
+++ b/drivers/input/serio/maceps2.c
@@ -21,7 +21,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 8b44ddc8041..d8aac177307 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -39,7 +39,6 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
-#include <asm/system.h>
 
 MODULE_AUTHOR("Vojtech Pavlik, Russell King");
 MODULE_DESCRIPTION("Acorn RiscPC PS/2 keyboard controller driver");
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 44fc8b4bcd8..e3c85fafe93 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -20,7 +20,6 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <asm/hardware/sa1111.h>
 
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index 44b50cc645e..c21353d8e91 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -18,7 +18,6 @@
 #include <linux/serial.h>
 #include <linux/major.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 33e3c94887d..c644557ae61 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index fe254e74a85..a8c4d3fc9a6 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -44,7 +44,6 @@
 #include <linux/timer.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 68f50495d16..f0dfc0c976e 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -44,7 +44,6 @@
 #include <linux/timer.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index bfe94284b0d..4deac451807 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -25,7 +25,6 @@
 #include <linux/timer.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
diff --git a/drivers/isdn/i4l/isdn_bsdcomp.c b/drivers/isdn/i4l/isdn_bsdcomp.c
index 7f3c54d4047..c59e8d2c067 100644
--- a/drivers/isdn/i4l/isdn_bsdcomp.c
+++ b/drivers/isdn/i4l/isdn_bsdcomp.c
@@ -69,7 +69,6 @@
 #include <linux/signal.h>	/* used in new tty drivers */
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/types.h>
 
diff --git a/drivers/isdn/pcbit/layer2.c b/drivers/isdn/pcbit/layer2.c
index 682911f8113..a18e639b40d 100644
--- a/drivers/isdn/pcbit/layer2.c
+++ b/drivers/isdn/pcbit/layer2.c
@@ -36,7 +36,6 @@
 
 #include <linux/isdnif.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index b6ef8f59076..87de8d9bcfa 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -14,7 +14,6 @@
 #include <asm/pgtable.h>
 #include <asm/hydra.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index c60d025044e..fc71723cbc4 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -29,7 +29,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 
 #undef DEBUG
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index 0ff92c20800..97cfc5ac9fd 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -127,7 +127,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/macio.h>
 
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 46c4e95f10d..3b4a157714b 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -41,7 +41,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/macio.h>
 
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index 971bc9582a5..86511c570dd 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -26,7 +26,6 @@
 #include <asm/mac_via.h>
 #endif
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/init.h>
 
 static volatile unsigned char __iomem *via;
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index c9570fcf1cc..3725f088f17 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -34,7 +34,6 @@
 #include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/mac_via.h>
-#include <asm/system.h>
 
 static volatile unsigned char *via;
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 6cccd60c594..22b8ce4191c 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -50,7 +50,6 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/pmac_feature.h>
diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c
index aeb30d07d5a..a00ee41f057 100644
--- a/drivers/macintosh/via-pmu68k.c
+++ b/drivers/macintosh/via-pmu68k.c
@@ -37,7 +37,6 @@
 #include <asm/mac_via.h>
 
 #include <asm/pgtable.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 647c6add219..4d6a90a1372 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -18,7 +18,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/pmac_low_i2c.h>
 
diff --git a/drivers/macintosh/windfarm_pm121.c b/drivers/macintosh/windfarm_pm121.c
index 30e6195e19d..04067e073aa 100644
--- a/drivers/macintosh/windfarm_pm121.c
+++ b/drivers/macintosh/windfarm_pm121.c
@@ -215,7 +215,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/smu.h>
 
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index 749d174b0dc..fc13d0f2663 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -107,7 +107,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/smu.h>
 
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 34427323512..a9430ed4f36 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -41,7 +41,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/smu.h>
 
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 43137b421f9..3c2be5193fd 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -18,7 +18,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/smu.h>
 
diff --git a/drivers/macintosh/windfarm_smu_sensors.c b/drivers/macintosh/windfarm_smu_sensors.c
index 3c193504bb8..1cc4e4953d8 100644
--- a/drivers/macintosh/windfarm_smu_sensors.c
+++ b/drivers/macintosh/windfarm_smu_sensors.c
@@ -18,7 +18,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 #include <asm/smu.h>
 
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index e4b5c03ae51..73970cd97af 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -29,7 +29,6 @@
 #include <linux/ioctl.h>
 #include <linux/wait.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include "dmxdev.h"
 
 static int debug;
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
index 864b6274c72..e24ec539a5f 100644
--- a/drivers/media/dvb/firewire/firedtv-fw.c
+++ b/drivers/media/dvb/firewire/firedtv-fw.c
@@ -20,7 +20,6 @@
 #include <linux/workqueue.h>
 
 #include <asm/page.h>
-#include <asm/system.h>
 
 #include <dvb_demux.h>
 
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 6ecbcf61487..4bd8bd56bef 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -53,7 +53,6 @@
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
-#include <asm/system.h>
 
 #include <linux/dvb/frontend.h>
 
diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c
index 7b42ace419d..04d6d541d86 100644
--- a/drivers/media/media-devnode.c
+++ b/drivers/media/media-devnode.c
@@ -40,7 +40,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #include <media/media-devnode.h>
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 06f3d78389b..52d5dd71032 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -54,7 +54,6 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include <linux/dvb/video.h>
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 5c6100fb407..1baec839330 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -55,7 +55,6 @@
 #include <linux/spi/spi.h>
 #endif
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/div64.h>
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 96e9615663e..8546f812944 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -26,7 +26,6 @@
 #include <linux/kmod.h>
 #include <linux/slab.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index c8ed7b63fdf..1d31d7284cb 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -57,7 +57,6 @@
 #include <linux/scatterlist.h>
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <linux/atomic.h>
 
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 86cc3f7841c..32c82de81ad 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -20,7 +20,6 @@
 #include <linux/mfd/mcp.h>
 
 #include <mach/dma.h>
-#include <asm/system.h>
 
 
 #define to_mcp(d)		container_of(d, struct mcp, attached_device)
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 02c53a0766c..4a27c2b9a89 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -23,7 +23,6 @@
 #include <mach/dma.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/system.h>
 #include <mach/mcp.h>
 
 #include <mach/assabet.h>
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 851b2f25ce0..c862cd4583c 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -25,7 +25,6 @@
 #endif
 
 #if defined CONFIG_IA64
-#include <asm/system.h>
 #include <asm/sn/arch.h>	/* defines is_shub1() and is_shub2() */
 #define is_shub()	ia64_platform_is("sn2")
 #endif
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index e5a3c7b6ded..4c3b2847e47 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -41,7 +41,6 @@
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include "queue.h"
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index ecff765579d..5d53c5760a6 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -93,7 +93,6 @@
 #include <linux/fs.h>
 #include <linux/ioctl.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/pci.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index e585263161b..288594163c2 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -42,7 +42,6 @@
 #include <linux/ioctl.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <linux/mtd/mtd.h>
 
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index e8e9fec2355..0259cf58302 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -14,7 +14,6 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 50387fd4009..64c9cbaf86a 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -31,7 +31,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
-#include <asm/system.h>
 
 #include <mach/reg_nand.h>
 #include <mach/reg_umi.h>
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 9abd4eb86dc..dd5e04813b7 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -70,7 +70,6 @@ static const char *version =
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 6057b30417a..0910dce3996 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -229,7 +229,6 @@ static int dma;
 #include <linux/bitops.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
index 980e65c1493..5bed4c4e250 100644
--- a/drivers/net/arcnet/com20020_cs.c
+++ b/drivers/net/arcnet/com20020_cs.c
@@ -47,7 +47,6 @@
 #include <pcmcia/ds.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
 
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 0730203a19f..d6e85864bee 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -54,7 +54,6 @@
 #include <linux/inet.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/system.h>
 #include <asm/dma.h>
 #include <linux/uaccess.h>
 #include <linux/errno.h>
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 98a5a7d867f..034c16b60e9 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -40,7 +40,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <linux/bitops.h>
 #include <linux/string.h>
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 7cb2785e209..ec03b401620 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -35,7 +35,6 @@
 #include <asm/io.h>         /* CRIS_LED_* I/O functions */
 #include <asm/irq.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/ethernet.h>
 #include <asm/cache.h>
 #include <arch/io_interface_mux.h>
diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
index e61b2f82ba3..66df9363808 100644
--- a/drivers/net/ethernet/3com/3c574_cs.c
+++ b/drivers/net/ethernet/3com/3c574_cs.c
@@ -95,7 +95,6 @@ earlier 3Com products.
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /*====================================================================*/
 
diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
index b23253b9f74..a556c01e011 100644
--- a/drivers/net/ethernet/3com/3c589_cs.c
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -50,7 +50,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /* To minimize the size of the driver source I only define operating
    constants if they are used several times.  You'll need the manual
diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c
index fbab1367505..49d76bd0dc8 100644
--- a/drivers/net/ethernet/8390/3c503.c
+++ b/drivers/net/ethernet/8390/3c503.c
@@ -54,7 +54,6 @@ static const char version[] =
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include "8390.h"
diff --git a/drivers/net/ethernet/8390/ac3200.c b/drivers/net/ethernet/8390/ac3200.c
index 5337dd0a59b..ccf07942ff6 100644
--- a/drivers/net/ethernet/8390/ac3200.c
+++ b/drivers/net/ethernet/8390/ac3200.c
@@ -34,7 +34,6 @@ static const char version[] =
 #include <linux/init.h>
 #include <linux/interrupt.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c
index 3ad5d2f9a49..923959275a8 100644
--- a/drivers/net/ethernet/8390/apne.c
+++ b/drivers/net/ethernet/8390/apne.c
@@ -39,7 +39,6 @@
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/amigaints.h>
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index c30adcc9828..11476ca95e9 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -31,7 +31,6 @@
 
 #include <net/ax88796.h>
 
-#include <asm/system.h>
 
 /* Rename the lib8390.c functions to show that they are in this driver */
 #define __ei_open ax_ei_open
diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
index c5bd8eb7a9f..e1b3941bd14 100644
--- a/drivers/net/ethernet/8390/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -46,7 +46,6 @@
 #include <pcmcia/cisreg.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c
index d16dc53c181..ed55ce85ebb 100644
--- a/drivers/net/ethernet/8390/e2100.c
+++ b/drivers/net/ethernet/8390/e2100.c
@@ -48,7 +48,6 @@ static const char version[] =
 #include <linux/delay.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/es3210.c b/drivers/net/ethernet/8390/es3210.c
index 6428f9e7a55..ba1b5c95531 100644
--- a/drivers/net/ethernet/8390/es3210.c
+++ b/drivers/net/ethernet/8390/es3210.c
@@ -59,7 +59,6 @@ static const char version[] =
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c
index a45b0d8a9f1..dbefd5658c1 100644
--- a/drivers/net/ethernet/8390/etherh.c
+++ b/drivers/net/ethernet/8390/etherh.c
@@ -45,7 +45,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/ecard.h>
 #include <asm/io.h>
 #include <asm/system_info.h>
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
index d42938b6b59..52f70f999c0 100644
--- a/drivers/net/ethernet/8390/hp-plus.c
+++ b/drivers/net/ethernet/8390/hp-plus.c
@@ -33,7 +33,6 @@ static const char version[] =
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "8390.h"
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
index 113f1e075a2..37fa89aa457 100644
--- a/drivers/net/ethernet/8390/hp.c
+++ b/drivers/net/ethernet/8390/hp.c
@@ -33,7 +33,6 @@ static const char version[] =
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "8390.h"
diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
index e77f624e819..b329f5c0d62 100644
--- a/drivers/net/ethernet/8390/lib8390.c
+++ b/drivers/net/ethernet/8390/lib8390.c
@@ -57,7 +57,6 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/irq.h>
diff --git a/drivers/net/ethernet/8390/lne390.c b/drivers/net/ethernet/8390/lne390.c
index 69490ae018e..479409bf2e3 100644
--- a/drivers/net/ethernet/8390/lne390.c
+++ b/drivers/net/ethernet/8390/lne390.c
@@ -46,7 +46,6 @@ static const char *version =
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
index af5d9822cad..88ccc8b14f0 100644
--- a/drivers/net/ethernet/8390/mac8390.c
+++ b/drivers/net/ethernet/8390/mac8390.c
@@ -37,7 +37,6 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 #include <asm/dma.h>
 #include <asm/hwtest.h>
 #include <asm/macints.h>
diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c
index 9b9c77d5a65..7fc28f2d28a 100644
--- a/drivers/net/ethernet/8390/ne-h8300.c
+++ b/drivers/net/ethernet/8390/ne-h8300.c
@@ -29,7 +29,6 @@ static const char version1[] =
 #include <linux/etherdevice.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index f92ea2a65a5..d04911d33b6 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -53,7 +53,6 @@ static const char version2[] =
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "8390.h"
diff --git a/drivers/net/ethernet/8390/ne2.c b/drivers/net/ethernet/8390/ne2.c
index 922b32036c6..ef85839f43d 100644
--- a/drivers/net/ethernet/8390/ne2.c
+++ b/drivers/net/ethernet/8390/ne2.c
@@ -76,7 +76,6 @@ static const char *version = "ne2.c:v0.91 Nov 16 1998 Wim Dumon <wimpie@kotnet.o
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c
index 3fab04a0034..5e8845febfb 100644
--- a/drivers/net/ethernet/8390/ne2k-pci.c
+++ b/drivers/net/ethernet/8390/ne2k-pci.c
@@ -54,7 +54,6 @@ static int options[MAX_UNITS];
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c
index 2a3e8057fea..a2f8b2b8e27 100644
--- a/drivers/net/ethernet/8390/ne3210.c
+++ b/drivers/net/ethernet/8390/ne3210.c
@@ -39,7 +39,6 @@
 #include <linux/mm.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index f2a4e5de18c..de1af0bfed4 100644
--- a/drivers/net/ethernet/8390/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -49,7 +49,6 @@
 #include <pcmcia/cisreg.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/net/ethernet/8390/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c
index 77efec44fea..7a68590f280 100644
--- a/drivers/net/ethernet/8390/smc-mca.c
+++ b/drivers/net/ethernet/8390/smc-mca.c
@@ -47,7 +47,6 @@
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c
index 1cc306a83ff..b0fbce39661 100644
--- a/drivers/net/ethernet/8390/smc-ultra.c
+++ b/drivers/net/ethernet/8390/smc-ultra.c
@@ -69,7 +69,6 @@ static const char version[] =
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c
index bb87053eb3d..923e42aedcf 100644
--- a/drivers/net/ethernet/8390/smc-ultra32.c
+++ b/drivers/net/ethernet/8390/smc-ultra32.c
@@ -57,7 +57,6 @@ static const char *version = "smc-ultra32.c: 06/97 v1.00\n";
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c
index 3b903759980..8df4c415723 100644
--- a/drivers/net/ethernet/8390/stnic.c
+++ b/drivers/net/ethernet/8390/stnic.c
@@ -17,7 +17,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <mach-se/mach/se.h>
 #include <asm/machvec.h>
diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c
index c175fadb597..03eb3eed49f 100644
--- a/drivers/net/ethernet/8390/wd.c
+++ b/drivers/net/ethernet/8390/wd.c
@@ -39,7 +39,6 @@ static const char version[] =
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "8390.h"
 
diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c
index bcd27323b20..7818e6397e9 100644
--- a/drivers/net/ethernet/8390/zorro8390.c
+++ b/drivers/net/ethernet/8390/zorro8390.c
@@ -31,7 +31,6 @@
 #include <linux/zorro.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/amigaints.h>
 #include <asm/amigahw.h>
diff --git a/drivers/net/ethernet/alteon/acenic.c b/drivers/net/ethernet/alteon/acenic.c
index 6c3b1c0adaa..7219123fa0a 100644
--- a/drivers/net/ethernet/alteon/acenic.c
+++ b/drivers/net/ethernet/alteon/acenic.c
@@ -78,7 +78,6 @@
 #include <net/sock.h>
 #include <net/ip.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/ethernet/amd/7990.c b/drivers/net/ethernet/amd/7990.c
index 1b046f58d58..6e722dc37db 100644
--- a/drivers/net/ethernet/amd/7990.c
+++ b/drivers/net/ethernet/amd/7990.c
@@ -33,7 +33,6 @@
 #include <linux/socket.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/pgtable.h>
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index cc7b9e46780..e10ffad525a 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -30,7 +30,6 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/system.h>
 
 #define TX_BUFFERS 15
 #define RX_BUFFERS 25
diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 9f62504d008..64d0d9c1afa 100644
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -88,7 +88,6 @@ Revision History:
 #include <linux/crc32.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 7dc508e5c72..75299f500ee 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -64,7 +64,6 @@
 #include <linux/types.h>
 
 #include <asm/addrspace.h>
-#include <asm/system.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic.h>
diff --git a/drivers/net/ethernet/amd/hplance.c b/drivers/net/ethernet/amd/hplance.c
index 4e2d68a4de8..8baff4e5d96 100644
--- a/drivers/net/ethernet/amd/hplance.c
+++ b/drivers/net/ethernet/amd/hplance.c
@@ -22,7 +22,6 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 
diff --git a/drivers/net/ethernet/amd/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
index 56bc47a9418..9af3c307862 100644
--- a/drivers/net/ethernet/amd/mvme147.c
+++ b/drivers/net/ethernet/amd/mvme147.c
@@ -22,7 +22,6 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/mvme147hw.h>
diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
index ebdb9e238a8..9f59bf63514 100644
--- a/drivers/net/ethernet/amd/nmclan_cs.c
+++ b/drivers/net/ethernet/amd/nmclan_cs.c
@@ -154,7 +154,6 @@ Include Files
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /* ----------------------------------------------------------------------------
 Defines
diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index e3fe3504e19..d7a3533d990 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -95,7 +95,6 @@ static char lancestr[] = "LANCE";
 #include <linux/of_device.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/pgtable.h>
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index b0657466041..a374f278834 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -48,7 +48,6 @@
 #include <net/checksum.h>
 #include <net/ip.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index d5ff93653e4..98c171b3a45 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -148,7 +148,6 @@
 #include <linux/delay.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #if ALLOW_DMA
diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
index 932fdccc339..e285f384b09 100644
--- a/drivers/net/ethernet/cirrus/mac89x0.c
+++ b/drivers/net/ethernet/cirrus/mac89x0.c
@@ -99,7 +99,6 @@ static char *version =
 #include <linux/bitops.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/hwtest.h>
 #include <asm/macints.h>
diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c
index 682750c052c..414f0eea104 100644
--- a/drivers/net/ethernet/dlink/de600.c
+++ b/drivers/net/ethernet/dlink/de600.c
@@ -46,7 +46,6 @@ static const char version[] = "de600.c: $Revision: 1.41-2.5 $,  Bjorn Ekwall (bj
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/in.h>
-#include <asm/system.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c
index afc5aaac6b6..2e2bc60ee81 100644
--- a/drivers/net/ethernet/dlink/de620.c
+++ b/drivers/net/ethernet/dlink/de620.c
@@ -122,7 +122,6 @@ static const char version[] =
 #include <linux/skbuff.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 /* Constant definitions for the DE-620 registers, commands and bits */
 #include "de620.h"
diff --git a/drivers/net/ethernet/fujitsu/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c
index 586b46fd4ee..3d94797c8f9 100644
--- a/drivers/net/ethernet/fujitsu/at1700.c
+++ b/drivers/net/ethernet/fujitsu/at1700.c
@@ -52,7 +52,6 @@
 #include <linux/crc32.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/fujitsu/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
index c3f0178fb5c..a992d1f7e0d 100644
--- a/drivers/net/ethernet/fujitsu/eth16i.c
+++ b/drivers/net/ethernet/fujitsu/eth16i.c
@@ -163,7 +163,6 @@ static char *version =
 #include <linux/jiffies.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 #include <asm/dma.h>
 
 
diff --git a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
index 0230319ddb5..2418faf2251 100644
--- a/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
+++ b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
@@ -57,7 +57,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 /*====================================================================*/
 
diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c
index ed6925f1147..e8984b05990 100644
--- a/drivers/net/ethernet/i825xx/3c507.c
+++ b/drivers/net/ethernet/i825xx/3c507.c
@@ -63,7 +63,6 @@ static const char version[] =
 
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 /* use 0 for production, 1 for verification, 2..7 for debug */
diff --git a/drivers/net/ethernet/i825xx/3c527.c b/drivers/net/ethernet/i825xx/3c527.c
index ef43f3e951c..278e791afe0 100644
--- a/drivers/net/ethernet/i825xx/3c527.c
+++ b/drivers/net/ethernet/i825xx/3c527.c
@@ -106,7 +106,6 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net.
 #include <linux/semaphore.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c
index 7a4ad4a0791..7f49fd54c52 100644
--- a/drivers/net/ethernet/i825xx/eepro.c
+++ b/drivers/net/ethernet/i825xx/eepro.c
@@ -148,7 +148,6 @@ static const char version[] =
 #include <linux/bitops.h>
 #include <linux/ethtool.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/i825xx/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c
index 3fc649e54a3..cc2e66ad443 100644
--- a/drivers/net/ethernet/i825xx/eexpress.c
+++ b/drivers/net/ethernet/i825xx/eexpress.c
@@ -116,7 +116,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c
index 406a12b4640..067db3f13e9 100644
--- a/drivers/net/ethernet/i825xx/ether1.c
+++ b/drivers/net/ethernet/i825xx/ether1.c
@@ -48,7 +48,6 @@
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/ecard.h>
diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c
index a43649735a0..bd1f1ef91e1 100644
--- a/drivers/net/ethernet/i825xx/znet.c
+++ b/drivers/net/ethernet/i825xx/znet.c
@@ -100,7 +100,6 @@
 #include <linux/if_arp.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c
index f30db1c4660..bc58f1dc22f 100644
--- a/drivers/net/ethernet/korina.c
+++ b/drivers/net/ethernet/korina.c
@@ -55,7 +55,6 @@
 #include <linux/crc32.h>
 
 #include <asm/bootinfo.h>
-#include <asm/system.h>
 #include <asm/bitops.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 75af1afe46c..5e1ca0f0509 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -57,7 +57,6 @@
 #include <linux/types.h>
 #include <linux/inet_lro.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
 static char mv643xx_eth_driver_version[] = "1.4";
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 45a6333588e..efec6b60b32 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -43,7 +43,6 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <linux/pxa168_eth.h>
 
diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index 5b89fd377ae..95dd39ffb23 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -38,7 +38,6 @@
 #include <linux/slab.h>
 
 #include <asm/bootinfo.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/dma.h>
diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
index e640e23460d..b9680ba5a32 100644
--- a/drivers/net/ethernet/natsemi/macsonic.c
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -53,7 +53,6 @@
 #include <linux/slab.h>
 
 #include <asm/bootinfo.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/hwtest.h>
diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
index c24b46cbfe2..d52728b3c43 100644
--- a/drivers/net/ethernet/natsemi/ns83820.c
+++ b/drivers/net/ethernet/natsemi/ns83820.c
@@ -121,7 +121,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #define DRV_NAME "ns83820"
 
diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 22a8de00bf0..6338ef8606a 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -81,7 +81,6 @@
 #include <linux/prefetch.h>
 #include <net/tcp.h>
 
-#include <asm/system.h>
 #include <asm/div64.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 8561dd25db6..aca13046e43 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -69,7 +69,6 @@
 #include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #define TX_WORK_PER_LOOP  64
 #define RX_WORK_PER_LOOP  64
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index 46c1932048c..e02f04d7f3a 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -140,7 +140,6 @@ static int xcvr[NUM_UNITS]; 			/* The data transfer mode. */
 #include <linux/delay.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 27c358c8f4d..7b23554f80b 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -29,7 +29,6 @@
 #include <linux/pci-aspm.h>
 #include <linux/prefetch.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index 7b819bd8c41..df808ac8cb6 100644
--- a/drivers/net/ethernet/seeq/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -64,7 +64,6 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/ecard.h>
 #include <asm/io.h>
 
diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c
index 79899077444..698edbbfc14 100644
--- a/drivers/net/ethernet/seeq/seeq8005.c
+++ b/drivers/net/ethernet/seeq/seeq8005.c
@@ -47,7 +47,6 @@ static const char version[] =
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
diff --git a/drivers/net/ethernet/smsc/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
index d12e48a7861..04393b5fef7 100644
--- a/drivers/net/ethernet/smsc/smc91c92_cs.c
+++ b/drivers/net/ethernet/smsc/smc91c92_cs.c
@@ -53,7 +53,6 @@
 #include <pcmcia/ss.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 /*====================================================================*/
diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 3c229556073..ce4df61b4b5 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -99,7 +99,6 @@
 #include <net/checksum.h>
 
 #include <linux/atomic.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c
index f359863b534..2a83fc57edb 100644
--- a/drivers/net/ethernet/sun/sunbmac.c
+++ b/drivers/net/ethernet/sun/sunbmac.c
@@ -35,7 +35,6 @@
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 
 #include "sunbmac.h"
 
diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index ba041596e04..558409ff405 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -41,7 +41,6 @@
 #include <linux/mm.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 8b627e2f798..b95e7e681b3 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -36,7 +36,6 @@
 #include <linux/bitops.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c
index 139d6b410d6..7d4a040d84a 100644
--- a/drivers/net/ethernet/sun/sunqe.c
+++ b/drivers/net/ethernet/sun/sunqe.c
@@ -28,7 +28,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
index 840e0e9031f..277c93e9ff4 100644
--- a/drivers/net/ethernet/tundra/tsi108_eth.c
+++ b/drivers/net/ethernet/tundra/tsi108_eth.c
@@ -50,7 +50,6 @@
 #include <linux/platform_device.h>
 #include <linux/gfp.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/tsi108.h>
 
diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
index 5c69c6f93fb..94a1f94f74b 100644
--- a/drivers/net/ethernet/xircom/xirc2ps_cs.c
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
@@ -89,7 +89,6 @@
 #include <pcmcia/ciscode.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #ifndef MANFID_COMPAQ
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 2a5a34d2d67..64783a0d545 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/bitops.h>
 #include <linux/string.h>
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index f1aea0c9833..acb636963e9 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -86,7 +86,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 /* --------------------------------------------------------------------- */
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index 18d8affecd1..76d54774ba8 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -69,7 +69,6 @@
 #include <linux/if_arp.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index bc02968cee1..aed1a6105b2 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -17,7 +17,6 @@
  * Copyright (C) 2004, 05 Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de>
  */
 #include <linux/module.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <asm/uaccess.h>
 #include <linux/crc16.h>
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index 33655814448..efc6c97163a 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -177,7 +177,6 @@
 #include <net/ax25.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 696327773fb..5a6412ecce7 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -52,7 +52,6 @@
 #include <linux/bitops.h>
 #include <linux/random.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/firmware.h>
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index 2a51363d9fe..168c8f41d09 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -43,7 +43,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <asm/cache.h>
 #include <asm/byteorder.h>
 #include <asm/io.h>
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 617a446d126..4351296dde3 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -156,7 +156,6 @@
 #include <linux/pci.h>
 #include <linux/rtnetlink.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <net/irda/wrapper.h>
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index b71998d0b5b..32eb94ece6c 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -41,7 +41,6 @@
 #include <linux/in.h>
 #include <linux/init.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/drivers/net/plip/plip.c b/drivers/net/plip/plip.c
index 1a5a316cc96..bed62d9c53c 100644
--- a/drivers/net/plip/plip.c
+++ b/drivers/net/plip/plip.c
@@ -113,7 +113,6 @@ static const char version[] = "NET3 PLIP version 2.4-parport gniibe@mri.co.jp\n"
 
 #include <net/neighbour.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/byteorder.h>
 
diff --git a/drivers/net/slip/slhc.c b/drivers/net/slip/slhc.c
index 0a0a6643cf3..1252d9c726a 100644
--- a/drivers/net/slip/slhc.c
+++ b/drivers/net/slip/slhc.c
@@ -75,7 +75,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <linux/timer.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <net/checksum.h>
 #include <asm/unaligned.h>
diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index 69345dfae0f..d4c9db3da22 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -64,7 +64,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/bitops.h>
 #include <linux/sched.h>
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index d7c292aa76b..b15ac81d46f 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -68,7 +68,6 @@
 #include <net/checksum.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "3c359.h"
 
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 515f122777a..b715e6b444d 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -33,7 +33,6 @@
 #include <linux/netdevice.h>
 #include <linux/trdevice.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c
index 91b684630fc..356e28e4881 100644
--- a/drivers/net/tokenring/ibmtr_cs.c
+++ b/drivers/net/tokenring/ibmtr_cs.c
@@ -63,7 +63,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #define PCMCIA
 #include "ibmtr.c"
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 8d71e0d2906..3e4b4f09111 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -127,7 +127,6 @@
 #include <net/checksum.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "lanstreamer.h"
 
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 1cdc034f6ae..28adcdf3b14 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -28,7 +28,6 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
 #include <linux/netdevice.h>
 #include <linux/trdevice.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index fd8dce90c95..0e234741cc7 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -106,7 +106,6 @@
 #include <net/net_namespace.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "olympic.h"
 
diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index 8d362e64a40..62d90e40f9e 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c
@@ -31,7 +31,6 @@ static const char version[] = "proteon.c: v1.00 02/01/2003 by Jochen Friedrich\n
 #include <linux/trdevice.h>
 #include <linux/platform_device.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pci.h>
diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index 46db5c5395b..ee11e93dc30 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c
@@ -38,7 +38,6 @@ static const char version[] = "skisa.c: v1.03 09/12/2002 by Jochen Friedrich\n";
 #include <linux/trdevice.h>
 #include <linux/platform_device.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pci.h>
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 029846a9863..cb35fb79e01 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -49,7 +49,6 @@
 #include <linux/bitops.h>
 #include <linux/firmware.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 102f896bbc5..be4813e0366 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -98,7 +98,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A
 #include <linux/firmware.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/irq.h>
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index d3e788a9cd1..fb9918da579 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -34,7 +34,6 @@
 #include <linux/netdevice.h>
 #include <linux/trdevice.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 74d7f76d14a..bb8c72c79c6 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -69,7 +69,6 @@
 #include <net/rtnetlink.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 /* Uncomment to enable debugging */
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 48ab38a34c5..147614ed86a 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -50,7 +50,6 @@
 
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index fe8d060d8ff..c676de7de02 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -93,7 +93,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/cache.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/wan/hd64570.c b/drivers/net/wan/hd64570.c
index 33b67d88fce..cf4903355a3 100644
--- a/drivers/net/wan/hd64570.c
+++ b/drivers/net/wan/hd64570.c
@@ -40,7 +40,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include "hd64570.h"
 
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index efc0db10118..e2779faa6c4 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -40,7 +40,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include "hd64572.h"
 
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7beeb9b88a3..a73b49eb87e 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -35,7 +35,6 @@
 #include <linux/if_arp.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index c8531612eea..de3bbf43fc5 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -54,7 +54,6 @@
 #include <linux/sdla.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index e862369b4a6..d7a65e141d1 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -18,7 +18,6 @@
 
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <linux/bitops.h>
 #include <linux/string.h>
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index ddc061dd150..520a4b2eb9c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -37,7 +37,6 @@
 #include <linux/scatterlist.h>
 #include <linux/crypto.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include <linux/netdevice.h>
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index c983c10e0f6..630577dd3a7 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -37,7 +37,6 @@
 #include <pcmcia/ds.h>
 
 #include <linux/io.h>
-#include <asm/system.h>
 
 #include "airo.h"
 
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 3010cee7b95..6c87a823f5a 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -50,7 +50,6 @@
 #include <linux/timer.h>
 #include <asm/byteorder.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ec295c4f677..ded03d226a7 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -48,7 +48,6 @@
 #include <pcmcia/ciscode.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/wireless.h>
 
 #include "atmel.h"
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
index 851fa10241e..c5404cb59e0 100644
--- a/drivers/net/wireless/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -24,7 +24,6 @@
 #include <linux/slab.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <linux/if_arp.h>
 
 #include "prismcompat.h"
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 04fec1fa6e0..86a738bf591 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -53,7 +53,6 @@
 #include <net/iw_handler.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 98fbf54f600..00f6e69c1dc 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -53,7 +53,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include "wl3501.h"
 
diff --git a/drivers/nubus/nubus.c b/drivers/nubus/nubus.c
index b764ac22d52..44d01afafe9 100644
--- a/drivers/nubus/nubus.c
+++ b/drivers/nubus/nubus.c
@@ -17,7 +17,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/page.h>
 #include <asm/hwtest.h>
 #include <linux/proc_fs.h>
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 7ff10c1e866..9c5aae52a3b 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -55,7 +55,6 @@
 
 #include <asm/pdc.h>
 #include <asm/page.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/hardware.h>
 
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 95930d01623..1f9e9fefb8e 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -140,7 +140,6 @@
 #include <asm/pdc.h>
 #include <asm/pdcpat.h>
 #include <asm/page.h>
-#include <asm/system.h>
 #include <asm/io.h>		/* read/write functions */
 #ifdef CONFIG_SUPERIO
 #include <asm/superio.h>
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index d5f3d753a10..320e43a52e9 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -43,7 +43,6 @@
 #include <asm/pdc.h>
 #include <asm/pdcpat.h>
 #include <asm/page.h>
-#include <asm/system.h>
 
 #include <asm/ropes.h>
 #include <asm/hardware.h>	/* for register_parisc_driver() stuff */
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index d9ea192c400..673c14ea11e 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -29,7 +29,6 @@
 #include <linux/device.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 3e447d0387b..0b66bfc0e14 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -17,7 +17,6 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "i82092aa.h"
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 72a033a2acd..e6f3d17dd2b 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -48,7 +48,6 @@
 #include <linux/bitops.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/ss.h>
 
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 2adb0106a03..a26f38c6402 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -24,7 +24,6 @@
 #include <linux/bitops.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/ss.h>
 
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 1511ff71c87..296514155cd 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -24,7 +24,6 @@
 #include <linux/bitops.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/addrspace.h>
 
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 271a590a5f3..a317defd616 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -52,7 +52,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/time.h>
 #include <asm/mpc8xx.h>
 #include <asm/8xx_immap.h>
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 96c72e90b79..0f8b70b2776 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -19,7 +19,6 @@
 
 #include <pcmcia/ss.h>
 
-#include <asm/system.h>
 
 #include "pd6729.h"
 #include "i82365.h"
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 64d433ec4fc..85ac0957dcd 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -29,7 +29,6 @@
 #include <mach/smemc.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 0c62fe31a40..79ecc23643e 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -41,7 +41,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "soc_common.h"
 #include "sa11xx_base.h"
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index a0a9c2aa8d7..5d22c6acb8e 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -45,7 +45,6 @@
 #include <linux/timer.h>
 
 #include <mach/hardware.h>
-#include <asm/system.h>
 
 #include "soc_common.h"
 
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 71aeed93037..d6881514d38 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -23,7 +23,6 @@
 #include <linux/pm.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 310160bffe3..cbe15fc3741 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -47,7 +47,6 @@
 #include <linux/bitops.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/ss.h>
 #include "tcic.h"
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index 379f4218857..8f6698074f8 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -21,7 +21,6 @@
 #include <pcmcia/cistpl.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #define MEM_MAP_SIZE	0x400000
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index b859d16cf78..769d265b221 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -17,7 +17,6 @@
 
 #include <asm/page.h>
 #include <asm/desc.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include "pnpbios.h"
diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c
index cfe86853feb..9d422264864 100644
--- a/drivers/pnp/pnpbios/core.c
+++ b/drivers/pnp/pnpbios/core.c
@@ -65,7 +65,6 @@
 
 #include <asm/page.h>
 #include <asm/desc.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include "../base.h"
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index c5c121f14c9..7e9a72eb2fe 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -42,7 +42,6 @@
 #include <asm/reset.h>
 #include <asm/airq.h>
 #include <linux/atomic.h>
-#include <asm/system.h>
 #include <asm/isc.h>
 #include <linux/hrtimer.h>
 #include <linux/ktime.h>
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 826157f3869..327657e2e26 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -16,7 +16,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 8d6e508222b..2236aea3ca2 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -40,7 +40,6 @@
 #include <linux/fs.h>
 #include <asm/oplib.h>
 #include <asm/prom.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/openpromio.h>
 #ifdef CONFIG_PCI
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 0b31658ccde..a9e468cc1ca 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -19,7 +19,6 @@
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index f672491774e..a3adfb4357f 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -129,7 +129,6 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/byteorder.h>
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index f66c33b9ab4..d4da3708763 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -47,7 +47,6 @@
 
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index bfd618a6949..374c4edf4fc 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -41,7 +41,6 @@
 #include <linux/firmware.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/dma.h>
 
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index f17c92cf808..19a36945e6f 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -239,7 +239,6 @@
 #include <asm/irq.h>
 #include <linux/io.h>
 #include <linux/blkdev.h>
-#include <asm/system.h>
 #include <linux/completion.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index ed119cedaae..ede91f37800 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -42,7 +42,6 @@
 #include <linux/slab.h>
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "scsi.h"
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 1c10b796c1a..a3e6ed35391 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -53,7 +53,6 @@
 #include <linux/gfp.h>
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "scsi.h"
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 2fe9e90e53d..cbde1dca45a 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -61,7 +61,6 @@
 #include <linux/aer.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index c454e44cf51..b330438ac66 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -138,7 +138,6 @@
 #include <linux/stringify.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 #include <asm/ecard.h>
 
 #include "../scsi.h"
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index a3398fe70a9..c3b99c93637 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -12,7 +12,6 @@
 
 #include <asm/ecard.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "../scsi.h"
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 849cdf89f7b..d25f944b59c 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -13,7 +13,6 @@
 
 #include <asm/ecard.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "../scsi.h"
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 7e6eca4a125..f29d5121d5e 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -30,7 +30,6 @@
 #include <linux/blkdev.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index c2677ba29c7..4b11bb04f5c 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -72,7 +72,6 @@
 #endif
 
 
-#include <asm/system.h>
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index a2c6135d337..53bfcaa86f0 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -93,7 +93,6 @@
 #include <linux/mca-legacy.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "scsi.h"
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 643f6d500fe..1a2a1e5824e 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -282,7 +282,6 @@
 #include <linux/slab.h>
 #include <scsi/scsicam.h>
 
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 81182badfeb..1a5954f0915 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -100,7 +100,6 @@
 #undef NCR5380_STAT_LIMIT
 #endif
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <linux/signal.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index d42ec921de4..5d72274c507 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -129,7 +129,6 @@
 #include <linux/reboot.h>
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <linux/spinlock.h>
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 67fc8ffd52e..cd09132d5d7 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -32,7 +32,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include "scsi.h"
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 112f1bec775..deb5b6d8398 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -123,7 +123,6 @@
 #include <linux/stat.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include "scsi.h"
 #include <scsi/scsi_host.h>
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index e6173376605..e5cd8d8d4ce 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -22,7 +22,6 @@
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
-#include <asm/system.h>
 #include <asm/pci-bridge.h>
 #include <asm/macio.h>
 
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index 2bccfbe5661..24828b54773 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -43,7 +43,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include <asm/macintosh.h>
 #include <asm/macints.h>
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 49447477953..e8a04ae3276 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -33,7 +33,6 @@
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/prom.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/hydra.h>
 #include <asm/processor.h>
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 4b3b4755945..5982a587bab 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -115,7 +115,6 @@
 
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 002924963cd..62b616891a3 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -38,7 +38,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index de0b1a704fb..21883a2d632 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -54,7 +54,6 @@ static const char * osst_version = "0.99.4";
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 
 /* The driver prints some debugging information on the console if DEBUG
    is defined and non-zero. */
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index f2018b46f49..2f72c9807b1 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -113,7 +113,6 @@
  
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <linux/signal.h>
 #include <linux/proc_fs.h>
 #include <asm/io.h>
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index d838205ab16..6c6486f626e 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -359,7 +359,6 @@
 #include <asm/byteorder.h>
 #include <asm/processor.h>
 #include <asm/types.h>
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index e40dc1cb09a..b191dd54920 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -35,7 +35,6 @@
 #include "qlogicpti.h"
 
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/ptrace.h>
 #include <asm/pgtable.h>
 #include <asm/oplib.h>
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 9262cdfa4b2..a15f691f9d3 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -42,7 +42,6 @@ static const char *verstr = "20101219";
 
 #include <asm/uaccess.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_dbg.h>
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index baf7328de95..6e25889db9d 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -63,7 +63,6 @@
 #include <linux/blkdev.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <asm/sun3ints.h>
 #include <asm/dvma.h>
diff --git a/drivers/scsi/sun3_scsi_vme.c b/drivers/scsi/sun3_scsi_vme.c
index fbba78e5722..a3dd55d1d2f 100644
--- a/drivers/scsi/sun3_scsi_vme.c
+++ b/drivers/scsi/sun3_scsi_vme.c
@@ -25,7 +25,6 @@
 #include <linux/blkdev.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <asm/sun3ints.h>
 #include <asm/dvma.h>
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index 012c86edd59..ac4eca6a532 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -37,7 +37,6 @@
 #include <linux/proc_fs.h>
 #include <linux/spinlock.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <linux/blkdev.h>
 #include <linux/isapnp.h>
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 041eaaace2c..d672d97fb84 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -106,7 +106,6 @@
  * $Log: t128.c,v $
  */
 
-#include <asm/system.h>
 #include <linux/signal.h>
 #include <linux/io.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 90e104d6b55..9c216e56356 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -410,7 +410,6 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <linux/proc_fs.h>
 #include <linux/blkdev.h>
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 7e22b737dfd..14e0c40a68c 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -141,7 +141,6 @@
 #include <linux/delay.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/dma.h>
 
 #define ULTRASTOR_PRIVATE	/* Get the private stuff from ultrastor.h */
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 9ee0afef2d1..d89a5dfd3ad 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -179,7 +179,6 @@
 #include <linux/stat.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 #include <asm/dma.h>
 
 #include <scsi/scsi.h>
diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c
index 610f7391456..9b0d7169603 100644
--- a/drivers/spi/spi-omap-uwire.c
+++ b/drivers/spi/spi-omap-uwire.c
@@ -47,7 +47,6 @@
 #include <linux/spi/spi_bitbang.h>
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index db1fd63aaab..bf185e2807d 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -42,7 +42,6 @@
 #include <linux/cdev.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
-#include <asm/system.h>
 
 #include "comedidev.h"
 #include "internal.h"
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index c9e8c478576..915157d4780 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -86,7 +86,6 @@ TODO:
 #include "../comedidev.h"
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <asm/system.h>
 
 #include "comedi_pci.h"
 #include "8253.h"
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index fd274e9c7b7..13e9c807169 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -55,7 +55,6 @@
 #include "comedi_pci.h"
 #include "../comedidev.h"
 
-#include <asm/system.h>
 
 #define PCI_MITE_SIZE		4096
 #define PCI_DAQ_SIZE		4096
diff --git a/drivers/staging/crystalhd/crystalhd.h b/drivers/staging/crystalhd/crystalhd.h
index 3f4d7951502..b3a550bd5b0 100644
--- a/drivers/staging/crystalhd/crystalhd.h
+++ b/drivers/staging/crystalhd/crystalhd.h
@@ -1,7 +1,6 @@
 #ifndef _CRYSTALHD_H_
 #define _CRYSTALHD_H_
 
-#include <asm/system.h>
 #include "bc_dts_defs.h"
 #include "crystalhd_misc.h"
 #include "bc_dts_glob_lnx.h"
diff --git a/drivers/staging/crystalhd/crystalhd_lnx.h b/drivers/staging/crystalhd/crystalhd_lnx.h
index a81f9298b0a..a9e36336d09 100644
--- a/drivers/staging/crystalhd/crystalhd_lnx.h
+++ b/drivers/staging/crystalhd/crystalhd_lnx.h
@@ -45,7 +45,6 @@
 #include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 #include <linux/uaccess.h>
 
 #include "crystalhd.h"
diff --git a/drivers/staging/crystalhd/crystalhd_misc.h b/drivers/staging/crystalhd/crystalhd_misc.h
index 84c87938a83..8cdaa7a3481 100644
--- a/drivers/staging/crystalhd/crystalhd_misc.h
+++ b/drivers/staging/crystalhd/crystalhd_misc.h
@@ -37,6 +37,7 @@
 #include <linux/ioctl.h>
 #include <linux/dma-mapping.h>
 #include <linux/sched.h>
+#include "bc_dts_glob_lnx.h"
 
 /* Global log level variable defined in crystal_misc.c file */
 extern uint32_t g_linklog_level;
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c
index 3f919babe79..886f5650444 100644
--- a/drivers/staging/et131x/et131x.c
+++ b/drivers/staging/et131x/et131x.c
@@ -70,7 +70,6 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
-#include <asm/system.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index 7569aa0f24d..c4a8a0a26eb 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -29,7 +29,6 @@
 #include <linux/interrupt.h>
 #include <linux/in.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/bitops.h>
 
 #include <linux/netdevice.h>
diff --git a/drivers/staging/media/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c
index 6c9279a6d60..ece2dd14648 100644
--- a/drivers/staging/media/go7007/go7007-driver.c
+++ b/drivers/staging/media/go7007/go7007-driver.c
@@ -30,7 +30,6 @@
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <linux/videodev2.h>
 #include <media/tuner.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/staging/media/go7007/go7007-i2c.c b/drivers/staging/media/go7007/go7007-i2c.c
index b8cfa1a6eae..6bc82aaeef1 100644
--- a/drivers/staging/media/go7007/go7007-i2c.c
+++ b/drivers/staging/media/go7007/go7007-i2c.c
@@ -26,7 +26,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #include "go7007-priv.h"
 #include "wis-i2c.h"
diff --git a/drivers/staging/media/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c
index 2b27d8da70a..c8c96e26bc7 100644
--- a/drivers/staging/media/go7007/go7007-v4l2.c
+++ b/drivers/staging/media/go7007/go7007-v4l2.c
@@ -34,7 +34,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #include "go7007.h"
 #include "go7007-priv.h"
diff --git a/drivers/staging/media/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c
index d071c838ac2..5af29ff68bf 100644
--- a/drivers/staging/media/go7007/snd-go7007.c
+++ b/drivers/staging/media/go7007/snd-go7007.c
@@ -29,7 +29,6 @@
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
-#include <asm/system.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 8dd8897ad86..18a798c27a7 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -66,7 +66,6 @@
 #include <linux/poll.h>
 #include <linux/platform_device.h>
 
-#include <asm/system.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/fcntl.h>
diff --git a/drivers/staging/media/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
index c94382b917a..945d9623550 100644
--- a/drivers/staging/media/lirc/lirc_sir.c
+++ b/drivers/staging/media/lirc/lirc_sir.c
@@ -49,7 +49,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/poll.h>
-#include <asm/system.h>
 #include <linux/io.h>
 #include <asm/irq.h>
 #include <linux/fcntl.h>
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 4683d5f355c..6183573f112 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -58,7 +58,6 @@
 
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #define LCD_MINOR		156
 #define KEYPAD_MINOR		185
diff --git a/drivers/staging/sbe-2t3e3/io.c b/drivers/staging/sbe-2t3e3/io.c
index b458ff03406..9a50bcc5959 100644
--- a/drivers/staging/sbe-2t3e3/io.c
+++ b/drivers/staging/sbe-2t3e3/io.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/ip.h>
-#include <asm/system.h>
 #include "2t3e3.h"
 #include "ctrl.h"
 
diff --git a/drivers/staging/telephony/phonedev.c b/drivers/staging/telephony/phonedev.c
index 1915af20117..1dd0b6717cc 100644
--- a/drivers/staging/telephony/phonedev.c
+++ b/drivers/staging/telephony/phonedev.c
@@ -24,7 +24,6 @@
 #include <linux/phonedev.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/kmod.h>
 #include <linux/sem.h>
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index a2f31c69d12..ed00d3da320 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -17,7 +17,6 @@
 #ifndef _HOST_OS_H_
 #define _HOST_OS_H_
 
-#include <asm/system.h>
 #include <linux/atomic.h>
 #include <linux/semaphore.h>
 #include <linux/uaccess.h>
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index a2cbb29c3f5..7084f414846 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -74,7 +74,6 @@
 #include <linux/in.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/bitops.h>
 
 #include <linux/netdevice.h>
diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c
index dab603e0f45..d5bf0a7012f 100644
--- a/drivers/staging/wlags49_h2/wl_main.c
+++ b/drivers/staging/wlags49_h2/wl_main.c
@@ -86,8 +86,7 @@
 // #include <linux/in.h>
 // #include <linux/delay.h>
 // #include <asm/io.h>
-// #include <asm/system.h>
-// #include <asm/bitops.h>
+// // #include <asm/bitops.h>
 #include <linux/unistd.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index 9c16f5478a7..90820ff1ace 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -79,8 +79,7 @@
 // #include <linux/delay.h>
 // #include <linux/skbuff.h>
 // #include <asm/io.h>
-// #include <asm/system.h>
-// #include <asm/bitops.h>
+// // #include <asm/bitops.h>
 
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
index 2bd9b84ace8..3df990c7306 100644
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ b/drivers/staging/wlags49_h2/wl_pci.c
@@ -77,7 +77,6 @@
 #include <linux/interrupt.h>
 #include <linux/in.h>
 #include <linux/delay.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/bitops.h>
diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c
index b748a3ff795..f104e6f1e98 100644
--- a/drivers/staging/wlags49_h2/wl_util.c
+++ b/drivers/staging/wlags49_h2/wl_util.c
@@ -73,8 +73,7 @@
 // #include <linux/in.h>
 // #include <linux/delay.h>
 // #include <asm/io.h>
-// #include <asm/system.h>
-// #include <asm/bitops.h>
+// // #include <asm/bitops.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index afadcd43d14..24145c30c9b 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -85,7 +85,6 @@ static char *serial_version = "4.30";
 
 #include <asm/setup.h>
 
-#include <asm/system.h>
 
 #include <asm/irq.h>
 
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 03c14979acc..794ecb40017 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -133,7 +133,6 @@
 
 #include <linux/uaccess.h>
 #include <linux/io.h>
-#include <asm/system.h>
 
 #include <linux/pci.h>
 
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 8a8d0440bab..324467d28a5 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -46,7 +46,6 @@
 #include <linux/slab.h>
 #include <linux/ratelimit.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 17ff377e412..c6f372dd562 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -41,7 +41,6 @@
 #include <linux/slab.h>
 #include <linux/ratelimit.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index a09ce3ef5d7..1b2db9a3038 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -102,7 +102,6 @@
 #include <linux/if.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/termios.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index d2256d08ee7..94b6eda87af 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -50,7 +50,6 @@
 #include <linux/uaccess.h>
 #include <linux/module.h>
 
-#include <asm/system.h>
 
 /* number of characters left in xmit buffer before select has we have room */
 #define WAKEUP_CHARS 256
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index f96ecaec24f..eeae7fafe9a 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -27,7 +27,6 @@
 #include <linux/devpts_fs.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 
 #ifdef CONFIG_UNIX98_PTYS
 static struct tty_driver *ptm_driver;
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 7398390e7e6..5ce782529d6 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -39,7 +39,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 86090605a84..29b695d041e 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -43,7 +43,6 @@
 #include <linux/delay.h>
 #include <linux/major.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 90280ae1823..5b07c0c3a10 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -34,7 +34,6 @@ static char *serial_version = "$Revision: 1.25 $";
 
 #include <asm/irq.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 
 #include <arch/svinto.h>
 #include <arch/system.h>
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index e3699a84049..6491b8644a7 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -52,7 +52,6 @@
 #include <linux/atomic.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/kn01.h>
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index d55709a7a75..defc4e3393a 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -52,7 +52,6 @@
 #include <linux/firmware.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 5e85e1e14c4..fca13dc73e2 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -50,7 +50,6 @@
 
 #include <linux/atomic.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include <mach/hardware.h>
 #include <mach/dma.h>
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index b7455b52608..4001eee6c08 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -67,7 +67,6 @@
 #include <linux/types.h>
 
 #include <linux/atomic.h>
-#include <asm/system.h>
 
 #include <asm/dec/interrupts.h>
 #include <asm/dec/ioasic_addrs.h>
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 8e518da85fd..593d40ad0a6 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -86,7 +86,6 @@
 #include <linux/ioctl.h>
 #include <linux/synclink.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 34b1a3c4306..aa1debf97cc 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -73,7 +73,6 @@
 #include <linux/hdlc.h>
 #include <linux/synclink.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 4fb6c4b31b7..a3dddc12d2f 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -58,7 +58,6 @@
 #include <linux/delay.h>
 #include <linux/ioctl.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index dd8a938510c..d939bd705c7 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -97,7 +97,6 @@
 #include <linux/ratelimit.h>
 
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/kbd_kern.h>
 #include <linux/vt_kern.h>
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 9314d93c1a2..a1b9a2f6856 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -23,7 +23,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #undef TTY_DEBUG_WAIT_UNTIL_SENT
 
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 84c4a7d5603..3bdd4b19dd0 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -99,7 +99,6 @@
 #include <linux/notifier.h>
 #include <linux/device.h>
 #include <linux/io.h>
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <linux/kdb.h>
 #include <linux/ctype.h>
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 2204a4c68d8..77779271f48 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -54,7 +54,6 @@
 #include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 /* gadget stack */
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 15a8cdb2ded..d03ab95fcc8 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -34,7 +34,6 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/gpio.h>
 
 #include <mach/board.h>
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index e1cd56c5e2a..a6dfd216416 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -44,7 +44,6 @@
 #include <asm/byteorder.h>
 #include <linux/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #define DRIVER_DESC	"USB Host+Gadget Emulator"
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index b30e21fdbb1..5f94e79cd6b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -43,7 +43,6 @@
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/dma.h>
 
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index e1dfd32dc80..e151d6b87de 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -43,7 +43,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index edd52d963f1..f9cedd52cf2 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -32,7 +32,6 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "langwell_udc.h"
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 19bbe80c2f8..a73cf406e2a 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -34,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/platform_data/mv_usb.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "mv_udc.h"
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 01ae56f4717..43ac7482fa9 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -42,7 +42,6 @@
 #include <linux/usb/gadget.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include "net2272.h"
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index a5ccabc37f3..ac335af154b 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -59,7 +59,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index b44830df593..3b4b6dd0f95 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -40,7 +40,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index d83134b0f78..4e4dc1f5f38 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -34,7 +34,6 @@
 #include <asm/byteorder.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 1b33634f273..41ed69c96d8 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -41,7 +41,6 @@
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
-#include <asm/system.h>
 #include <asm/mach-types.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index d3cdffea9c8..73a934a170d 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -34,7 +34,6 @@
 
 #include <asm/io.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index ab9c65e2c1d..195524cde6c 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -37,7 +37,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <mach/irqs.h>
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index aede6374e4b..057cdda7a48 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -45,7 +45,6 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #if defined(CONFIG_PPC_PS3)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 924880087a7..9e65e3091c8 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -70,7 +70,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include "isp116x.h"
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 9e63cdf1ab7..2ed112d3e15 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -84,7 +84,6 @@
 #include <linux/prefetch.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index cd5e382db89..788ff07aa7c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -42,7 +42,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 015c7c62ed4..3b38030b02a 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -40,7 +40,6 @@
 #include <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include <linux/irq.h>
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 2a2cce2d2fa..91ce1c02e61 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -51,7 +51,6 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 16dd6a6abf0..dbbd1ba2522 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -55,7 +55,6 @@
 #include <linux/mutex.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e37dea87bb5..e4db350602b 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -45,7 +45,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "uhci-hcd.h"
 
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index f23cae094f1..887df9d8142 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -53,7 +53,6 @@
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
diff --git a/drivers/video/bt431.h b/drivers/video/bt431.h
index c826f2787ba..04e0cfbba53 100644
--- a/drivers/video/bt431.h
+++ b/drivers/video/bt431.h
@@ -8,7 +8,6 @@
  *	archive for more details.
  */
 #include <linux/types.h>
-#include <asm/system.h>
 
 /*
  * Bt431 cursor generator registers, 32-bit aligned.
diff --git a/drivers/video/bt455.h b/drivers/video/bt455.h
index b7591fea7ad..80f61b03e9a 100644
--- a/drivers/video/bt455.h
+++ b/drivers/video/bt455.h
@@ -8,7 +8,6 @@
  *	archive for more details.
  */
 #include <linux/types.h>
-#include <asm/system.h>
 
 /*
  * Bt455 byte-wide registers, 32-bit aligned.
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 8745637e4b7..2e471c22abf 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -77,7 +77,6 @@
 #include <linux/crc32.h> /* For counting font checksums */
 #include <asm/fb.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "fbcon.h"
 
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index a122d9287d1..6d159662904 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -22,7 +22,6 @@
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/gio_device.h>
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c
index 850380795b0..c1527f5b47e 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/cyber2000fb.c
@@ -51,7 +51,6 @@
 #include <linux/i2c-algo-bit.h>
 
 #include <asm/pgtable.h>
-#include <asm/system.h>
 
 #ifdef __arm__
 #include <asm/mach-types.h>
diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c
index ec56d2544c7..49e3dda1a36 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/dnfb.c
@@ -7,7 +7,6 @@
 #include <linux/platform_device.h>
 
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/amigahw.h>
 #include <asm/amigaints.h>
diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c
index fb3f6739110..afc9521173e 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/neofb.c
@@ -71,7 +71,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/pmag-ba-fb.c
index 0c69fa20251..9b4a60b52a4 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/pmag-ba-fb.c
@@ -33,7 +33,6 @@
 #include <linux/types.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <video/pmag-ba-fb.h>
 
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/pmagb-b-fb.c
index 22fcb9a3d5c..4e7a9c46e11 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/pmagb-b-fb.c
@@ -29,7 +29,6 @@
 #include <linux/types.h>
 
 #include <asm/io.h>
-#include <asm/system.h>
 
 #include <video/pmagb-b-fb.h>
 
diff --git a/drivers/video/q40fb.c b/drivers/video/q40fb.c
index f5a39f5aa90..a104e8cd2f5 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/q40fb.c
@@ -20,7 +20,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/setup.h>
-#include <asm/system.h>
 #include <asm/q40_master.h>
 #include <linux/fb.h>
 #include <linux/module.h>
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index beb495044b2..cee7803a0a1 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -56,7 +56,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
-#include <asm/system.h>
 
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
diff --git a/drivers/virtio/config.c b/drivers/virtio/config.c
index 983d482fba4..f70bcd2ff98 100644
--- a/drivers/virtio/config.c
+++ b/drivers/virtio/config.c
@@ -9,5 +9,4 @@
 #include <linux/virtio.h>
 #include <linux/virtio_config.h>
 #include <linux/bug.h>
-#include <asm/system.h>
 
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
index 4d40965d2c9..6112bef2e8d 100644
--- a/drivers/watchdog/advantechwdt.c
+++ b/drivers/watchdog/advantechwdt.c
@@ -40,7 +40,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define DRV_NAME "advantechwdt"
 #define PFX DRV_NAME ": "
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
index 46f4b85b46d..486841895e9 100644
--- a/drivers/watchdog/alim7101_wdt.c
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -34,7 +34,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define OUR_NAME "alim7101_wdt"
 #define PFX OUR_NAME ": "
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 7c0fdfca264..3a76e1950cd 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -21,7 +21,6 @@
 #include <linux/uaccess.h>
 
 #include <asm/reg_booke.h>
-#include <asm/system.h>
 #include <asm/time.h>
 #include <asm/div64.h>
 
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
index 3946c51099c..f507fe7d5dc 100644
--- a/drivers/watchdog/eurotechwdt.c
+++ b/drivers/watchdog/eurotechwdt.c
@@ -59,7 +59,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 static unsigned long eurwdt_is_open;
 static int eurwdt_timeout;
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
index 0149d8dfc81..9402c0b2d55 100644
--- a/drivers/watchdog/ib700wdt.c
+++ b/drivers/watchdog/ib700wdt.c
@@ -44,7 +44,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 static struct platform_device *ibwdt_platform_device;
 static unsigned long ibwdt_is_open;
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index a2d9a1266a2..d761c41a9f3 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -43,7 +43,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 
 #define WATCHDOG_VERSION	"1.14"
 #define WATCHDOG_NAME		"IT87 WDT"
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index 1332b838cc5..b536111d53b 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -43,7 +43,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 /* ports */
 #define ZF_IOBASE	0x218
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index e78d8998676..669e5624c99 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -33,7 +33,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 /* #define DEBUG 1 */
 
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index 626d0e8e56c..4b53756542f 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -63,7 +63,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define OUR_NAME "sbc60xxwdt"
 #define PFX OUR_NAME ": "
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
index 93ac5895312..80f39a357de 100644
--- a/drivers/watchdog/sbc7240_wdt.c
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -30,7 +30,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 #include <linux/atomic.h>
-#include <asm/system.h>
 
 #define SBC7240_PREFIX "sbc7240_wdt: "
 
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
index 514ec23050f..7c242bc258c 100644
--- a/drivers/watchdog/sbc8360.c
+++ b/drivers/watchdog/sbc8360.c
@@ -51,7 +51,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 static unsigned long sbc8360_is_open;
 static char expect_close;
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index d5d39946459..07d59b33c48 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -25,7 +25,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 static unsigned int margin = 60;	/* (secs) Default is 1 minute */
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index b2840409ebc..c794803e708 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -67,7 +67,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define OUR_NAME "sc520_wdt"
 #define PFX OUR_NAME ": "
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index 97b8184614a..16365d093b3 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -58,7 +58,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 /* enable support for minutes as units? */
 /* (does not always work correctly, so disabled by default!) */
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 576a388a116..1283d0671c7 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -40,7 +40,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
 #define PFX WATCHDOG_NAME ": "
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index af08972de50..e5cb768f5b5 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -39,7 +39,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define WATCHDOG_NAME "w83697hf/hg WDT"
 #define PFX WATCHDOG_NAME ": "
diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c
index be9c4d839e1..24a46ff62a3 100644
--- a/drivers/watchdog/w83697ug_wdt.c
+++ b/drivers/watchdog/w83697ug_wdt.c
@@ -44,7 +44,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define WATCHDOG_NAME "w83697ug/uf WDT"
 #define PFX WATCHDOG_NAME ": "
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index 24587d2060c..5f3b9455f29 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -56,7 +56,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 #define OUR_NAME "w83877f_wdt"
 #define PFX OUR_NAME ": "
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 6e6743d1066..7f4330ea5ae 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -29,7 +29,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <asm/system.h>
 
 #define WATCHDOG_VERSION  "1.00"
 #define WATCHDOG_NAME     "W83977F WDT"
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index d2ef002be96..f3026cd49e6 100644
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -46,7 +46,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 #include "wd501p.h"
 
 static unsigned long wdt_is_open;
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
index a2f01c9f5c3..855bb0f0717 100644
--- a/drivers/watchdog/wdt977.c
+++ b/drivers/watchdog/wdt977.c
@@ -37,7 +37,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 #include <asm/mach-types.h>
 
 #define WATCHDOG_VERSION  "0.04"
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
index e0fc3baa919..fae25671561 100644
--- a/drivers/watchdog/wdt_pci.c
+++ b/drivers/watchdog/wdt_pci.c
@@ -53,7 +53,6 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
 
 #define WDT_IS_PCI
 #include "wd501p.h"
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index 4d5e6d26578..2eb12f13593 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -26,7 +26,6 @@
 #include <linux/coredump.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/cacheflush.h>
 #include <asm/a.out-core.h>
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 04f61f0bdfd..4e4017c0888 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -37,7 +37,6 @@
 #include <linux/syscalls.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 05156c17b55..2870597b5c9 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -21,7 +21,6 @@
 #include <linux/vfs.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include <linux/fs.h>
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 8f616e0e252..761d5b31b18 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -38,7 +38,6 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/poll.h>
 #include <asm/uaccess.h>
 
diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c
index 9727e0c5257..0c68fd31fbf 100644
--- a/fs/coda/upcall.c
+++ b/fs/coda/upcall.c
@@ -14,7 +14,6 @@
  * improvements to the Coda project. Contact Peter Braam <coda@cs.cmu.edu>.
  */
 
-#include <asm/system.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/types.h>
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 4d9d3a45e35..2a7dcd6ddc0 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -34,7 +34,6 @@
 #include <linux/mutex.h>
 #include <linux/anon_inodes.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/mman.h>
 #include <linux/atomic.h>
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index c067a8cae63..29853deee5e 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -28,7 +28,6 @@
 #include <linux/blkdev.h>
 #include <linux/bitops.h>
 #include <trace/events/jbd2.h>
-#include <asm/system.h>
 
 /*
  * Default IO end handler for temporary BJ_IO buffer_heads.
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 839377e3d62..c6d22745553 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -50,7 +50,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
-#include <asm/system.h>
 
 EXPORT_SYMBOL(jbd2_journal_extend);
 EXPORT_SYMBOL(jbd2_journal_stop);
diff --git a/fs/ncpfs/file.c b/fs/ncpfs/file.c
index 64a326418aa..3ff5fcc1528 100644
--- a/fs/ncpfs/file.c
+++ b/fs/ncpfs/file.c
@@ -7,7 +7,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/time.h>
 #include <linux/kernel.h>
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 49df0e7f837..87484fb8d17 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
 
diff --git a/fs/ncpfs/mmap.c b/fs/ncpfs/mmap.c
index e5d71b27a5b..be20a7e171a 100644
--- a/fs/ncpfs/mmap.c
+++ b/fs/ncpfs/mmap.c
@@ -19,7 +19,6 @@
 #include <linux/memcontrol.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include "ncp_fs.h"
 
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index d4f772ebd1e..ad5565acbf3 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -41,7 +41,6 @@
 #include <linux/nfs_xdr.h>
 #include <linux/sunrpc/bc_xprt.h>
 
-#include <asm/system.h>
 
 #include "nfs4_fs.h"
 #include "callback.h"
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 1940f1a56a5..ea5be1262d4 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -51,7 +51,6 @@
 #include <linux/nfs_page.h>
 #include <linux/sunrpc/clnt.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/atomic.h>
 
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index c43a452f7da..a77a1f2da5d 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -30,7 +30,6 @@
 #include <linux/swap.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include "delegation.h"
 #include "internal.h"
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index 801d6d83078..4ca6f5c8038 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -32,7 +32,6 @@
 #include <linux/namei.h>
 #include <linux/security.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include "nfs4_fs.h"
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index f649fba8c38..c2ce8196912 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -40,7 +40,6 @@
 #include <linux/compat.h>
 #include <linux/freezer.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include "nfs4_fs.h"
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index cfa175c223d..b83e89bf4a7 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -20,7 +20,6 @@
 #include <linux/nfs_page.h>
 #include <linux/module.h>
 
-#include <asm/system.h>
 #include "pnfs.h"
 
 #include "nfs4_fs.h"
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 3dfa4f112c0..e3f6b234941 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -53,7 +53,6 @@
 #include <linux/magic.h>
 #include <linux/parser.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include "nfs4_fs.h"
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 8461a7b82fd..205c9228083 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -22,7 +22,6 @@
 #include <linux/slab.h>
 #include <linux/mount.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include "internal.h"
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index cf9f4de00a9..b1a08573fe1 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -51,7 +51,6 @@
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 
 /* gets a struct reiserfs_journal_list * from a list head */
 #define JOURNAL_LIST_ENTRY(h) (list_entry((h), struct reiserfs_journal_list, \
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index 9094e1d917b..7cdd3953d67 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -26,7 +26,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/errno.h>
 #include <linux/fs.h>
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index f636f6b460d..ac8e279eccc 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -73,7 +73,6 @@
 #include <stdarg.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/errno.h>
 #include <linux/fs.h>
diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h
index df7ffb0affe..5bf3be45f54 100644
--- a/fs/xfs/xfs_buf.h
+++ b/fs/xfs/xfs_buf.h
@@ -21,7 +21,6 @@
 #include <linux/list.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
-#include <asm/system.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index f4b2effe033..6fbc4cab583 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -57,7 +57,6 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/sched.h>
-#include <asm/system.h>
 #include <linux/atomic.h>
 #include <asm/div64.h>
 #include <asm/acpi.h>
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 8b8cf941298..1ced6413ea0 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -54,7 +54,6 @@
 #define atomic_set(v, i) (((v)->counter) = (i))
 
 #include <linux/irqflags.h>
-#include <asm/system.h>
 
 /**
  * atomic_add_return - add integer to atomic variable
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
index e3d8bf26e5e..aa629bce903 100644
--- a/include/linux/cnt32_to_63.h
+++ b/include/linux/cnt32_to_63.h
@@ -16,7 +16,6 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
-#include <asm/system.h>
 
 /* this is used only to give gcc a clue about good code generation */
 union cnt32_to_63 {
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index 5033fb88c10..75cae8bf202 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -3,7 +3,6 @@
 
 #include <linux/kernel.h>
 #include <linux/atomic.h>
-#include <asm/system.h>
 
 struct task_struct;
 
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 47fbf6b3dc7..88ec80670d5 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -22,7 +22,6 @@
 #include <linux/pstore.h>
 
 #include <asm/page.h>
-#include <asm/system.h>
 
 #define EFI_SUCCESS		0
 #define EFI_LOAD_ERROR          ( 1 | (1UL << (BITS_PER_LONG-1)))
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 501370b61ee..9e355d006a0 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -23,7 +23,6 @@
 #include <acpi/acpi.h>
 #endif
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/io.h>
 
 /* for request_sense */
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 3f830e00511..2aea5d22db0 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -19,7 +19,6 @@
 
 #include <linux/atomic.h>
 #include <asm/ptrace.h>
-#include <asm/system.h>
 
 /*
  * These correspond to the IORESOURCE_IRQ_* defines in
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index 88e78dedc2e..eab507f2b1c 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -21,7 +21,6 @@
 #include <linux/path.h>
 #include <linux/key.h>
 #include <linux/skbuff.h>
-#include <asm/system.h>
 
 
 /* Auxiliary data to use in generating the audit record. */
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
index ade5c990f1f..3595a0236b0 100644
--- a/include/linux/mtd/map.h
+++ b/include/linux/mtd/map.h
@@ -29,7 +29,6 @@
 #include <linux/kernel.h>
 
 #include <asm/unaligned.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <asm/barrier.h>
 
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 38a423ed3c0..106c2ca9440 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -100,7 +100,6 @@ typedef enum {
 #include <linux/wait.h>
 #include <linux/irqreturn.h>
 #include <linux/semaphore.h>
-#include <asm/system.h>
 #include <asm/ptrace.h>
 
 /* Define this later. */
diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h
index 63d40655439..54bd7cd7ecb 100644
--- a/include/linux/rwsem.h
+++ b/include/linux/rwsem.h
@@ -14,7 +14,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 
-#include <asm/system.h>
 #include <linux/atomic.h>
 
 struct rw_semaphore;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 0c147a4260a..704464d71a9 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -63,7 +63,6 @@ struct sched_param {
 #include <linux/nodemask.h>
 #include <linux/mm_types.h>
 
-#include <asm/system.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/cputime.h>
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index a2b9953b582..bf86abb6194 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -500,7 +500,6 @@ struct sk_buff {
  */
 #include <linux/slab.h>
 
-#include <asm/system.h>
 
 /*
  * skb might have a dst pointer attached, refcounted or not.
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index fa0f93e4d86..8a98ddfef1f 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -57,7 +57,6 @@
 #include <linux/bottom_half.h>
 #include <asm/barrier.h>
 
-#include <asm/system.h>
 
 /*
  * Must define these before including other files, inline functions need them
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index c170edc3bf5..3b5e910d14c 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -5,7 +5,6 @@
 #include <linux/cpumask.h>
 #include <linux/smp.h>
 #include <linux/list.h>
-#include <asm/system.h>
 
 /*
  * stop_cpu[s]() is simplistic per-cpu maximum priority cpu
diff --git a/include/linux/tty.h b/include/linux/tty.h
index a91ff403b3b..9f47ab540f6 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -44,7 +44,6 @@
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
 
-#include <asm/system.h>
 
 
 /*
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 7d9a9e990ce..1dee81c41ff 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -22,7 +22,6 @@
 #include <linux/list.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
-#include <asm/system.h>
 #include <asm/current.h>
 
 typedef struct __wait_queue wait_queue_t;
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 0d7c08784ef..de50f7debd4 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -52,7 +52,6 @@
 #include <asm/cacheflush.h>
 #include <asm/byteorder.h>
 #include <linux/atomic.h>
-#include <asm/system.h>
 
 #include "debug_core.h"
 
diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
index 7179eac7b41..07c9bbb94a0 100644
--- a/kernel/debug/kdb/kdb_bt.c
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -15,7 +15,6 @@
 #include <linux/sched.h>
 #include <linux/kdb.h>
 #include <linux/nmi.h>
-#include <asm/system.h>
 #include "kdb_private.h"
 
 
diff --git a/kernel/dma.c b/kernel/dma.c
index 68a2306522c..6c6262f86c1 100644
--- a/kernel/dma.c
+++ b/kernel/dma.c
@@ -18,7 +18,6 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <asm/dma.h>
-#include <asm/system.h>
 
 
 
diff --git a/kernel/kexec.c b/kernel/kexec.c
index a6a675cb981..2a0deffa5db 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -37,7 +37,6 @@
 #include <asm/page.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/system.h>
 #include <asm/sections.h>
 
 /* Per cpu memory for storing cpu states in case of system crash. */
diff --git a/kernel/rwsem.c b/kernel/rwsem.c
index b152f74f02d..6850f53e02d 100644
--- a/kernel/rwsem.c
+++ b/kernel/rwsem.c
@@ -10,7 +10,6 @@
 #include <linux/export.h>
 #include <linux/rwsem.h>
 
-#include <asm/system.h>
 #include <linux/atomic.h>
 
 /*
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 04402ab7a04..696f394c2cb 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -145,7 +145,6 @@ static const int cap_last_cap = CAP_LAST_CAP;
 #include <linux/inotify.h>
 #endif
 #ifdef CONFIG_SPARC
-#include <asm/system.h>
 #endif
 
 #ifdef CONFIG_SPARC64
diff --git a/lib/llist.c b/lib/llist.c
index 700cff77a38..e429d276348 100644
--- a/lib/llist.c
+++ b/lib/llist.c
@@ -27,7 +27,6 @@
 #include <linux/interrupt.h>
 #include <linux/llist.h>
 
-#include <asm/system.h>
 
 /**
  * llist_add_batch - add several linked entries in batch
diff --git a/lib/raid6/altivec.uc b/lib/raid6/altivec.uc
index 69f3a9ff870..b71012b756f 100644
--- a/lib/raid6/altivec.uc
+++ b/lib/raid6/altivec.uc
@@ -28,7 +28,6 @@
 
 #include <altivec.h>
 #ifdef __KERNEL__
-# include <asm/system.h>
 # include <asm/cputable.h>
 # include <asm/switch_to.h>
 #endif
diff --git a/net/802/fc.c b/net/802/fc.c
index bd345f3d29f..b324e31401a 100644
--- a/net/802/fc.c
+++ b/net/802/fc.c
@@ -11,7 +11,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/net/802/fddi.c b/net/802/fddi.c
index 94b3ad08f39..5ab25cd4314 100644
--- a/net/802/fddi.c
+++ b/net/802/fddi.c
@@ -27,7 +27,6 @@
  */
 
 #include <linux/module.h>
-#include <asm/system.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/net/802/hippi.c b/net/802/hippi.c
index 91aca8780fd..056794e6637 100644
--- a/net/802/hippi.c
+++ b/net/802/hippi.c
@@ -35,7 +35,6 @@
 #include <net/arp.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 /*
  * Create the HIPPI MAC header for an arbitrary protocol layer
diff --git a/net/802/tr.c b/net/802/tr.c
index 5e20cf8a074..b9a3a145e34 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -16,7 +16,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 5de42ea309b..8ae3a787933 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -37,7 +37,6 @@
 #include <linux/param.h> /* for HZ */
 #include <linux/uaccess.h>
 #include <asm/byteorder.h> /* for htons etc. */
-#include <asm/system.h> /* save/restore_flags */
 #include <linux/atomic.h>
 
 #include "common.h"
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 3cd0a0dc91c..0906c194a41 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -33,7 +33,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
 #include <linux/mm.h>
diff --git a/net/ax25/ax25_addr.c b/net/ax25/ax25_addr.c
index 7e7964dd987..9162409559c 100644
--- a/net/ax25/ax25_addr.c
+++ b/net/ax25/ax25_addr.c
@@ -22,7 +22,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_dev.c b/net/ax25/ax25_dev.c
index c1cb982f6e8..d0de30e8959 100644
--- a/net/ax25/ax25_dev.c
+++ b/net/ax25/ax25_dev.c
@@ -24,7 +24,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_ds_in.c b/net/ax25/ax25_ds_in.c
index 8273b1200ee..9bd31e88aec 100644
--- a/net/ax25/ax25_ds_in.c
+++ b/net/ax25/ax25_ds_in.c
@@ -23,7 +23,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_ds_subr.c b/net/ax25/ax25_ds_subr.c
index 85816e612dc..5ea7fd3e2af 100644
--- a/net/ax25/ax25_ds_subr.c
+++ b/net/ax25/ax25_ds_subr.c
@@ -24,7 +24,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_ds_timer.c b/net/ax25/ax25_ds_timer.c
index c7d81436213..993c439b4f7 100644
--- a/net/ax25/ax25_ds_timer.c
+++ b/net/ax25/ax25_ds_timer.c
@@ -25,7 +25,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
index 60b545e2822..7d5f24b82cc 100644
--- a/net/ax25/ax25_iface.c
+++ b/net/ax25/ax25_iface.c
@@ -24,7 +24,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c
index 9bb77654120..96f4cab3a2f 100644
--- a/net/ax25/ax25_in.c
+++ b/net/ax25/ax25_in.c
@@ -27,7 +27,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_ip.c b/net/ax25/ax25_ip.c
index cf0c47a2653..846ae4e2b11 100644
--- a/net/ax25/ax25_ip.c
+++ b/net/ax25/ax25_ip.c
@@ -24,7 +24,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
 #include <linux/mm.h>
diff --git a/net/ax25/ax25_out.c b/net/ax25/ax25_out.c
index 37507d806f6..be8a25e0db6 100644
--- a/net/ax25/ax25_out.c
+++ b/net/ax25/ax25_out.c
@@ -27,7 +27,6 @@
 #include <linux/netfilter.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index 87fddab22e0..a65588040b9 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -32,7 +32,6 @@
 #include <linux/spinlock.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_std_in.c b/net/ax25/ax25_std_in.c
index a8eef88d865..3fbf8f7b2cf 100644
--- a/net/ax25/ax25_std_in.c
+++ b/net/ax25/ax25_std_in.c
@@ -30,7 +30,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_std_subr.c b/net/ax25/ax25_std_subr.c
index 277f81bb979..8b66a41e538 100644
--- a/net/ax25/ax25_std_subr.c
+++ b/net/ax25/ax25_std_subr.c
@@ -21,7 +21,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_std_timer.c b/net/ax25/ax25_std_timer.c
index 96e4b927325..004467c9e6e 100644
--- a/net/ax25/ax25_std_timer.c
+++ b/net/ax25/ax25_std_timer.c
@@ -25,7 +25,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c
index c6715ee4ab8..1997538a5d2 100644
--- a/net/ax25/ax25_subr.c
+++ b/net/ax25/ax25_subr.c
@@ -26,7 +26,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_timer.c b/net/ax25/ax25_timer.c
index db29ea71e80..c3cffa79baf 100644
--- a/net/ax25/ax25_timer.c
+++ b/net/ax25/ax25_timer.c
@@ -29,7 +29,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
index 4c83137b595..e3c579ba632 100644
--- a/net/ax25/ax25_uid.c
+++ b/net/ax25/ax25_uid.c
@@ -26,7 +26,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index 9f9c8dcd8af..180bfc45810 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -42,7 +42,6 @@
 #include <linux/uaccess.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 
 #include "bnep.h"
 
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index 1230faaac29..311668d1457 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -39,7 +39,6 @@
 
 #include <linux/isdn/capilli.h>
 
-#include <asm/system.h>
 
 #include "cmtp.h"
 
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 947172bf162..5238b6b3ea6 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -37,7 +37,6 @@
 #include <linux/interrupt.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 59ec99eb739..e33af63a884 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -45,7 +45,6 @@
 #include <linux/crypto.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index badb7851d11..b37531094c4 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -37,7 +37,6 @@
 #include <linux/interrupt.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 63afd234283..49142612916 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -42,7 +42,6 @@
 #include <linux/ioctl.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 3e450f4a312..b8e17e4dac8 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -49,7 +49,6 @@
 #include <linux/crc16.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 22169c3f148..a55a43e9f70 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -45,7 +45,6 @@
 #include <linux/security.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 
 #include <net/bluetooth/bluetooth.h>
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8bf26d1bc5c..f6ab1290796 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -44,7 +44,6 @@
 #include <linux/security.h>
 #include <net/sock.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 
 #include <net/bluetooth/bluetooth.h>
diff --git a/net/core/datagram.c b/net/core/datagram.c
index d3cf12f62c8..e4fbfd6e2bd 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -37,7 +37,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
diff --git a/net/core/dev.c b/net/core/dev.c
index 0f3eb7d79a2..926411b381a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -73,7 +73,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/capability.h>
 #include <linux/cpu.h>
diff --git a/net/core/filter.c b/net/core/filter.c
index 5dea4527921..cf4989ac503 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -33,7 +33,6 @@
 #include <net/sock.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <linux/filter.h>
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 43b03dd71e8..d9d198aa9fe 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -14,7 +14,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 1a63c6efd2e..90430b776ec 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -38,7 +38,6 @@
 #include <linux/pci.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/inet.h>
 #include <linux/netdevice.h>
diff --git a/net/core/scm.c b/net/core/scm.c
index ff52ad0a515..611c5efd4cb 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -28,7 +28,6 @@
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 #include <net/protocol.h>
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 6eb656acdfe..9e602a3104e 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -66,7 +66,6 @@
 #include <net/xfrm.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <trace/events/skb.h>
 
 #include "kmap_skb.h"
diff --git a/net/core/sock.c b/net/core/sock.c
index 9be6d0d6c53..b2e14c07d92 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -115,7 +115,6 @@
 #include <linux/memcontrol.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/netdevice.h>
 #include <net/protocol.h>
diff --git a/net/core/utils.c b/net/core/utils.c
index 386e263f606..dc3c3faff2f 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -30,7 +30,6 @@
 #include <net/net_ratelimit.h>
 
 #include <asm/byteorder.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 
 int net_msg_warn __read_mostly = 1;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 19acd00a638..4136987d94d 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -119,7 +119,6 @@ Version 0.0.6    2.1.110   07-aug-98   Eduardo Marcelo Serrat
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <net/flow.h>
-#include <asm/system.h>
 #include <asm/ioctls.h>
 #include <linux/capability.h>
 #include <linux/mm.h>
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 74d321a60e7..c00e3077988 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -42,7 +42,6 @@
 #include <linux/notifier.h>
 #include <linux/slab.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <net/net_namespace.h>
 #include <net/neighbour.h>
 #include <net/dst.h>
diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c
index 73fa268fe2e..f6544b2c91b 100644
--- a/net/decnet/dn_nsp_in.c
+++ b/net/decnet/dn_nsp_in.c
@@ -60,7 +60,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/termios.h>
diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c
index bd78836a81e..e446e85e64a 100644
--- a/net/decnet/dn_nsp_out.c
+++ b/net/decnet/dn_nsp_out.c
@@ -52,7 +52,6 @@
 #include <linux/route.h>
 #include <linux/slab.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/termios.h>
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 7e717cb35ad..71b5edcee40 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -47,7 +47,6 @@
 #include <linux/mutex.h>
 
 #include <linux/uaccess.h>
-#include <asm/system.h>
 
 static const struct proto_ops econet_ops;
 static struct hlist_head econet_sklist;
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index a93af86b847..bf10a311cf1 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -59,7 +59,6 @@
 #include <net/ip.h>
 #include <net/dsa.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 __setup("ether=", netdev_boot_setup);
 
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index fdf49fd44bb..10e3751466b 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -91,7 +91,6 @@
 #include <linux/slab.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 #include <linux/inet.h>
 #include <linux/igmp.h>
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 73f46d691ab..18d9b81ecb1 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -113,7 +113,6 @@
 #include <net/ax25.h>
 #include <net/netrom.h>
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 
 #include <linux/netfilter_arp.h>
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index e41c40f48cf..39e0c16d54c 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -27,7 +27,6 @@
 
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/capability.h>
 #include <linux/module.h>
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 76e72bacc21..cbe3a68507c 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -15,7 +15,6 @@
 
 #include <linux/module.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/capability.h>
 #include <linux/types.h>
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index a8c5c1d6715..5063fa38ac7 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -14,7 +14,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index da9b9cb2282..bce36f1a37b 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -51,7 +51,6 @@
 #define VERSION "0.409"
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 9664d353ccd..2cb2bf84564 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -91,7 +91,6 @@
 #include <linux/errno.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <net/checksum.h>
 #include <net/xfrm.h>
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 450e5d21ed2..5dfecfd7d5e 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -73,7 +73,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/jiffies.h>
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index f3f1108940f..26eccc5bab1 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -115,7 +115,6 @@
 
 #define pr_fmt(fmt) "IPv4: " fmt
 
-#include <asm/system.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index ff302bde889..4910176d24e 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -43,7 +43,6 @@
  */
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 0518a4fb177..960fbfc3e97 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -26,7 +26,6 @@
  *
  */
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/types.h>
 #include <linux/capability.h>
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index ab6b36e6da1..50009c787bc 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -20,7 +20,6 @@
  *
  */
 
-#include <asm/system.h>
 #include <linux/uaccess.h>
 #include <linux/types.h>
 #include <linux/fcntl.h>
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 12ccf880eb8..4dc1c104c94 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -66,7 +66,6 @@
 
 #include <linux/module.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d6f5feeb3ea..fe141052a1b 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -79,7 +79,6 @@
 
 #define pr_fmt(fmt) "UDP: " fmt
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/ioctls.h>
 #include <linux/bootmem.h>
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 5605f9dca87..8ed1b930e75 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -60,7 +60,6 @@
 #endif
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/mroute6.h>
 
 MODULE_AUTHOR("Cast of dozens");
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index af88934e4d7..27ac95a6342 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -66,7 +66,6 @@
 #include <net/inet_common.h>
 
 #include <asm/uaccess.h>
-#include <asm/system.h>
 
 /*
  *	The ICMP socket(s). This is the most convenient way to flow control
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 5aa3981a392..8110362e0af 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/types.h>
 #include <linux/sched.h>
diff --git a/net/irda/irlan/irlan_client.c b/net/irda/irlan/irlan_client.c
index ba1a3fc39b5..42cf1390ce9 100644
--- a/net/irda/irlan/irlan_client.c
+++ b/net/irda/irlan/irlan_client.c
@@ -37,7 +37,6 @@
 #include <linux/bitops.h>
 #include <net/arp.h>
 
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include <net/irda/irda.h>
diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c
index 579617cca12..7ac4d1becbf 100644
--- a/net/irda/irlan/irlan_common.c
+++ b/net/irda/irlan/irlan_common.c
@@ -40,7 +40,6 @@
 #include <linux/moduleparam.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include <net/irda/irda.h>
diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c
index 8b61cf0d8a6..32dcaac70b0 100644
--- a/net/irda/irlan/irlan_provider.c
+++ b/net/irda/irlan/irlan_provider.c
@@ -36,7 +36,6 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/byteorder.h>
 
 #include <net/irda/irda.h>
diff --git a/net/irda/timer.c b/net/irda/timer.c
index f418cb2ad49..1d552b3946f 100644
--- a/net/irda/timer.c
+++ b/net/irda/timer.c
@@ -24,7 +24,6 @@
  *
  ********************************************************************/
 
-#include <asm/system.h>
 #include <linux/delay.h>
 
 #include <net/irda/timer.h>
diff --git a/net/lapb/lapb_iface.c b/net/lapb/lapb_iface.c
index 8d0324bac01..ab3d35f2325 100644
--- a/net/lapb/lapb_iface.c
+++ b/net/lapb/lapb_iface.c
@@ -32,7 +32,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/lapb/lapb_in.c b/net/lapb/lapb_in.c
index 2ec1af5c36c..f4e3c1accab 100644
--- a/net/lapb/lapb_in.c
+++ b/net/lapb/lapb_in.c
@@ -30,7 +30,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/lapb/lapb_out.c b/net/lapb/lapb_out.c
index c75a79540f9..baab2760f65 100644
--- a/net/lapb/lapb_out.c
+++ b/net/lapb/lapb_out.c
@@ -28,7 +28,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/lapb/lapb_subr.c b/net/lapb/lapb_subr.c
index 43a2a7fb327..066225b4e82 100644
--- a/net/lapb/lapb_subr.c
+++ b/net/lapb/lapb_subr.c
@@ -27,7 +27,6 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/lapb/lapb_timer.c b/net/lapb/lapb_timer.c
index af6d14b44e2..f8cd641dfc8 100644
--- a/net/lapb/lapb_timer.c
+++ b/net/lapb/lapb_timer.c
@@ -28,7 +28,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index fe6cb4304d7..52856178c9d 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -31,7 +31,6 @@
 #include <net/net_namespace.h>
 #include <net/protocol.h>
 #include <net/tcp.h>
-#include <asm/system.h>
 #include <linux/stat.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index 85312939695..f843a883325 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -25,7 +25,6 @@
 #include <net/protocol.h>
 #include <net/tcp.h>
 #include <net/udp.h>
-#include <asm/system.h>
 #include <linux/stat.h>
 #include <linux/proc_fs.h>
 
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 4d70785b953..e6ddde16561 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -23,7 +23,6 @@
 #include <linux/net.h>
 #include <linux/skbuff.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <net/sock.h>
 #include <net/netlink.h>
 #include <linux/init.h>
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 7dab229bfbc..06592d8b4a2 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -31,7 +31,6 @@
 #include <net/net_namespace.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
 #include <linux/mm.h>
diff --git a/net/netrom/nr_dev.c b/net/netrom/nr_dev.c
index 64e6dde9749..1c51d7a58f0 100644
--- a/net/netrom/nr_dev.c
+++ b/net/netrom/nr_dev.c
@@ -21,7 +21,6 @@
 #include <linux/if_ether.h>	/* For the statistics structure. */
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
diff --git a/net/netrom/nr_in.c b/net/netrom/nr_in.c
index 6d4ef6d65b3..c3073a2ef63 100644
--- a/net/netrom/nr_in.c
+++ b/net/netrom/nr_in.c
@@ -24,7 +24,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/netrom/nr_out.c b/net/netrom/nr_out.c
index 607fddb4fdb..0b4bcb2bf38 100644
--- a/net/netrom/nr_out.c
+++ b/net/netrom/nr_out.c
@@ -23,7 +23,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index 2cf330162d7..70ffff76a96 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -26,7 +26,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
 #include <linux/mm.h>
diff --git a/net/netrom/nr_subr.c b/net/netrom/nr_subr.c
index 6a947ae50db..ca40e2298f5 100644
--- a/net/netrom/nr_subr.c
+++ b/net/netrom/nr_subr.c
@@ -23,7 +23,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/netrom/nr_timer.c b/net/netrom/nr_timer.c
index 1cb98e88f5e..ff2c1b142f5 100644
--- a/net/netrom/nr_timer.c
+++ b/net/netrom/nr_timer.c
@@ -24,7 +24,6 @@
 #include <net/sock.h>
 #include <net/tcp_states.h>
 #include <asm/uaccess.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index 2c030505b33..e44e631ea95 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -38,7 +38,6 @@
 #include <linux/udp.h>
 #include <linux/ethtool.h>
 #include <linux/wait.h>
-#include <asm/system.h>
 #include <asm/div64.h>
 #include <linux/highmem.h>
 #include <linux/netfilter_bridge.h>
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ae2d484416d..4f2c0df7956 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -73,7 +73,6 @@
 #include <net/sock.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/ioctls.h>
 #include <asm/page.h>
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index f9ea925ad9c..c4719ce604c 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -34,7 +34,6 @@
 #include <linux/if_arp.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index 178ff4f73c8..1ab8689726e 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -21,7 +21,6 @@
 #include <linux/if_ether.h>
 #include <linux/slab.h>
 
-#include <asm/system.h>
 #include <asm/io.h>
 
 #include <linux/inet.h>
diff --git a/net/rose/rose_in.c b/net/rose/rose_in.c
index 7f7fcb46b4f..79c4abcfa6b 100644
--- a/net/rose/rose_in.c
+++ b/net/rose/rose_in.c
@@ -26,7 +26,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/rose/rose_link.c b/net/rose/rose_link.c
index 7a02bd1cc5a..bc5514211b0 100644
--- a/net/rose/rose_link.c
+++ b/net/rose/rose_link.c
@@ -22,7 +22,6 @@
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/rose/rose_out.c b/net/rose/rose_out.c
index 4ebf33afbe4..9ad98b52464 100644
--- a/net/rose/rose_out.c
+++ b/net/rose/rose_out.c
@@ -21,7 +21,6 @@
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <net/sock.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index cd9b7ee60f3..40148932c8a 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -25,7 +25,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/fcntl.h>
 #include <linux/termios.h>	/* For TIOCINQ/OUTQ */
diff --git a/net/rose/rose_subr.c b/net/rose/rose_subr.c
index f6c71caa94b..47f1fdb346b 100644
--- a/net/rose/rose_subr.c
+++ b/net/rose/rose_subr.c
@@ -22,7 +22,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/rose/rose_timer.c b/net/rose/rose_timer.c
index b6c8f38cc26..bc5469d6d9c 100644
--- a/net/rose/rose_timer.c
+++ b/net/rose/rose_timer.c
@@ -23,7 +23,6 @@
 #include <linux/skbuff.h>
 #include <net/sock.h>
 #include <net/tcp_states.h>
-#include <asm/system.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index f0268ea7e71..d3daab6f2c0 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -17,7 +17,6 @@
  *  Copyright (C) 1995,1996 Olaf Kirch <okir@monad.swb.de>
  */
 
-#include <asm/system.h>
 
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/security/selinux/include/avc.h b/security/selinux/include/avc.h
index 47fda963495..005a91bcb20 100644
--- a/security/selinux/include/avc.h
+++ b/security/selinux/include/avc.h
@@ -15,7 +15,6 @@
 #include <linux/audit.h>
 #include <linux/lsm_audit.h>
 #include <linux/in6.h>
-#include <asm/system.h>
 #include "flask.h"
 #include "av_permissions.h"
 #include "security.h"
diff --git a/sound/oss/os.h b/sound/oss/os.h
index a1a962d7f67..75ad0cd0c0a 100644
--- a/sound/oss/os.h
+++ b/sound/oss/os.h
@@ -16,7 +16,6 @@
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <asm/page.h>
-#include <asm/system.h>
 #include <linux/vmalloc.h>
 #include <asm/uaccess.h>
 #include <linux/poll.h>
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index 12ba28e7b93..92ca5bee186 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -28,7 +28,6 @@
 #include <asm/io.h>
 #include <asm/hardware/iomd.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 
 #include "sound_config.h"
 #include "vidc.h"
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index 52468742d9f..24c430f721d 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -42,7 +42,6 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 
-#include <asm/system.h>
 
 #include "sound_config.h"
 #include "waveartist.h"
diff --git a/sound/pci/asihpi/hpios.h b/sound/pci/asihpi/hpios.h
index c5cef113c20..d3fbd0d76c3 100644
--- a/sound/pci/asihpi/hpios.h
+++ b/sound/pci/asihpi/hpios.h
@@ -30,7 +30,6 @@ HPI Operating System Specific macros for Linux Kernel driver
 #define HPI_BUILD_KERNEL_MODE
 
 #include <linux/io.h>
-#include <asm/system.h>
 #include <linux/ioctl.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c
index 8afd8b5d1ac..4439636971e 100644
--- a/sound/pci/aw2/aw2-saa7146.c
+++ b/sound/pci/aw2/aw2-saa7146.c
@@ -27,7 +27,6 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <asm/system.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include <sound/initval.h>
-- 
cgit v1.2.3-70-g09d2


From 8da00edc1069f01c34510fa405dc15d96c090a3f Mon Sep 17 00:00:00 2001
From: Masanari Iida <standby24x7@gmail.com>
Date: Wed, 28 Mar 2012 14:42:56 -0700
Subject: backlight: fix typo in tosa_lcd.c

Fix typo in drivers/video/backlight/tosa_lcd.c
"tosa_lcd_reume" should be "tosa_lcd_resume".

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/backlight/tosa_lcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index a2161f631a8..2231aec2391 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -271,7 +271,7 @@ static int tosa_lcd_resume(struct spi_device *spi)
 }
 #else
 #define tosa_lcd_suspend	NULL
-#define tosa_lcd_reume NULL
+#define tosa_lcd_resume NULL
 #endif
 
 static struct spi_driver tosa_lcd_driver = {
-- 
cgit v1.2.3-70-g09d2