From 0d52f54e2ef64c189dedc332e680b2eb4a34590a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 22 Oct 2011 00:43:38 +0200 Subject: PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug If the kernel has requested control of the PCIe native hotplug feature for a given root complex, the acpiphp driver should not try to handle that root complex and it should leave it to pciehp. Failing to do so causes problems to happen if acpiphp is loaded before pciehp on such systems. To address this issue make find_root_bridges() ignore PCIe root complexes with PCIe native hotplug enabled and make add_bridge() return error code if PCIe native hotplug is enabled for the given root port. This causes acpiphp to refuse to load if PCIe native hotplug is enabled for all complexes and to refuse binding to the root complexes with PCIe native hotplug is enabled. Acked-by: Kenji Kaneshige Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 596172b4ae9..fce1c54a0c8 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -459,8 +459,17 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; + struct acpi_pci_root *root; acpi_handle dummy_handle; + /* + * We shouldn't use this bridge if PCIe native hotplug control has been + * granted by the BIOS for it. + */ + root = acpi_pci_find_root(handle); + if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return -ENODEV; + /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1376,13 +1385,23 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { + struct acpi_pci_root *root; int *count = (int *)context; - if (acpi_is_root_bridge(handle)) { - acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, - handle_hotplug_event_bridge, NULL); - (*count)++; - } + if (!acpi_is_root_bridge(handle)) + return AE_OK; + + root = acpi_pci_find_root(handle); + if (!root) + return AE_OK; + + if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) + return AE_OK; + + (*count)++; + acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge, NULL); + return AE_OK ; } -- cgit v1.2.3-70-g09d2 From c54420d3302d30999060e2669d0800b85e5b5a20 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Sun, 30 Oct 2011 16:35:07 +0100 Subject: PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven Signed-off-by: Joerg Roedel Signed-off-by: Jesse Barnes --- drivers/pci/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index cec66064ee4..8252fc3430b 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -87,6 +87,7 @@ config PCI_IOV config PCI_PRI bool "PCI PRI support" + depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are -- cgit v1.2.3-70-g09d2 From fdbd3ce9efb3a045266f2f6b2f1b6047882ff092 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 7 Nov 2011 07:53:23 -0800 Subject: PCI: pciehp: Retrieve link speed after link is trained During hot plug, board_added will call pciehp_power_on_slot(). But link speed is updated in pciehp_power_on_slot(). We should not update link speed there, because that is too early. So move the link speed update to pciehp_check_link_status() after making sure the link has been trained. -v2: fix compile warning that Kenji found. Signed-off-by: Yinghai Lu Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 96dc4734e4a..6692832c9c8 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -294,6 +294,8 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); + return retval; } @@ -484,7 +486,6 @@ int pciehp_power_on_slot(struct slot * slot) u16 slot_cmd; u16 cmd_mask; u16 slot_status; - u16 lnk_status; int retval = 0; /* Clear sticky power-fault bit from previous power failures */ @@ -516,14 +517,6 @@ int pciehp_power_on_slot(struct slot * slot) ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); - retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); - if (retval) { - ctrl_err(ctrl, "%s: Cannot read LNKSTA register\n", - __func__); - return retval; - } - pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); - return retval; } -- cgit v1.2.3-70-g09d2 From 0027cb3e1947d0f453fece40ed16764fb362bac6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:40:37 +0900 Subject: PCI: pciehp: wait 1000 ms before Link Training check We need to wait for 1000 ms after Data Link Layer Link Active (DLLLA) bit reads 1b before sending configuration request. Currently pciehp does this wait after checking Link Training (LT) bit. But we need it before checking LT bit because LT is still set even after DLLLA bit is set on some platforms. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_ctrl.c | 3 --- drivers/pci/hotplug/pciehp_hpc.c | 8 ++++++++ 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 1e9c9aacc3a..085dbb5fc16 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -213,9 +213,6 @@ static int board_added(struct slot *p_slot) goto err_exit; } - /* Wait for 1 second after checking link training status */ - msleep(1000); - /* Check for a power fault */ if (ctrl->power_fault_detected || pciehp_query_power_fault(p_slot)) { ctrl_err(ctrl, "Power fault on slot %s\n", slot_name(p_slot)); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 6692832c9c8..81a177a5f03 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -280,6 +280,14 @@ int pciehp_check_link_status(struct controller *ctrl) else msleep(1000); + /* + * Need to wait for 1000 ms after Data Link Layer Link Active + * (DLLLA) bit reads 1b before sending configuration request. + * We need it before checking Link Training (LT) bit becuase + * LT is still set even after DLLLA bit is set on some platform. + */ + msleep(1000); + retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status); if (retval) { ctrl_err(ctrl, "Cannot read LNKSTATUS register\n"); -- cgit v1.2.3-70-g09d2 From b3c004542229099e18198061c737e13eafc8d4d6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 10 Nov 2011 16:42:16 +0900 Subject: PCI: pciehp: wait 100 ms after Link Training check If the port supports Link speeds greater than 5.0 GT/s, we must wait for 100 ms after Link training completes before sending configuration request. Acked-by: Yinghai Lu Tested-by: Yinghai Lu Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 81a177a5f03..7b1414810ae 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -302,6 +302,14 @@ int pciehp_check_link_status(struct controller *ctrl) return retval; } + /* + * If the port supports Link speeds greater than 5.0 GT/s, we + * must wait for 100 ms after Link training completes before + * sending configuration request. + */ + if (ctrl->pcie->port->subordinate->max_bus_speed > PCIE_SPEED_5_0GT) + msleep(100); + pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); return retval; -- cgit v1.2.3-70-g09d2 From 4cac2eb158c6da0c761689345c6cc5df788a6292 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 23 Aug 2011 10:16:43 -0600 Subject: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs Previously we claimed device ID 0x7450, regardless of the vendor, which is clearly wrong. Now we'll claim that device ID only for AMD. I suspect this was just a typo in the original code, but it's possible this change will break shpchp on non-7450 AMD bridges. If so, we'll have to fix them as we find them. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=638863 Reported-by: Ralf Jung Cc: Joerg Roedel Signed-off-by: Bjorn Helgaas Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_core.c | 4 ++-- drivers/pci/hotplug/shpchp_hpc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index aca972bbfb4..dd7e0c51a33 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -278,8 +278,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) static int is_shpc_capable(struct pci_dev *dev) { - if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) return 1; if (!pci_find_capability(dev, PCI_CAP_ID_SHPC)) return 0; diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 36547f0ce30..75ba2311b54 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -944,8 +944,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ ctrl_dbg(ctrl, "Hotplug Controller:\n"); - if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device == - PCI_DEVICE_ID_AMD_GOLAM_7450)) { + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) { /* amd shpc driver doesn't use Base Offset; assume 0 */ ctrl->mmio_base = pci_resource_start(pdev, 0); ctrl->mmio_size = pci_resource_len(pdev, 0); -- cgit v1.2.3-70-g09d2