From cd28ab6a4e50a7601d22752aa7ce0c8197b10bdf Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 16 Aug 2005 16:36:49 -0700 Subject: [PATCH] sky2: new experimental Marvell Yukon2 driver New driver for the Marvell Yukon2 Gigabit Ethernet chipset. This driver is based on the skge driver, but using the logic from the SysKonnect version of the sk98lin driver. It should support all the Yukon2 chipsets that are available in many current Intel and AMD motherboards. The driver does support ethtool, tx and rx checksum, and tcp segmentation offload. But it has only been tested for a short while and is known to stop receiving under heavy load. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 20 +- drivers/net/Makefile | 1 + drivers/net/sky2.c | 2686 ++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/sky2.h | 1935 ++++++++++++++++++++++++++++++++++++ 4 files changed, 4641 insertions(+), 1 deletion(-) create mode 100644 drivers/net/sky2.c create mode 100644 drivers/net/sky2.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb5880..4d7489ae5e2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1932,7 +1932,25 @@ config SKGE It does not support the link failover and network management features that "portable" vendor supplied sk98lin driver does. - + + +config SKY2 + tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This driver support the Marvell Yukon 2 Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sky2. This is recommended. + +config SKY2_EC_A1 + bool "Support old Yukon-EC A1 chipset" + depends on SKY2 + ---help--- + Include support for early revisions of the Yukon EC chipset + that required extra workarounds. If in doubt, say N. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 63c6d1e6d4d..7e5c0d46d50 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_BNX2) += bnx2.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o +obj-$(CONFIG_SKY2) += sky2.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c new file mode 100644 index 00000000000..cfb2b41bc6b --- /dev/null +++ b/drivers/net/sky2.c @@ -0,0 +1,2686 @@ +/* + * New driver for Marvell Yukon 2 chipset. + * Based on earlier sk98lin, and skge driver. + * + * This driver intentionally does not support all the features + * of the original driver such as link fail-over and link management because + * those should be done at higher levels. + * + * Copyright (C) 2005 Stephen Hemminger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * TODO + * - coalescing setting? + * - variable ring size? + * + * TOTEST + * - speed setting + * - power management + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "sky2.h" + +#define DRV_NAME "sky2" +#define DRV_VERSION "0.2" +#define PFX DRV_NAME " " + +/* + * The Yukon II chipset takes 64 bit command blocks (called list elements) + * that are organized into three (receive, transmit, status) different rings + * similar to Tigon3. A transmit can require several elements; + * a receive requires one (or two if using 64 bit dma). + */ + +#ifdef CONFIG_SKY2_EC_A1 +#define is_ec_a1(hw) \ + ((hw)->chip_id == CHIP_ID_YUKON_EC && \ + (hw)->chip_rev == CHIP_REV_YU_EC_A1) +#else +#define is_ec_a1(hw) 0 +#endif + +#define RX_LE_SIZE 256 +#define MIN_RX_BUFFERS 8 +#define MAX_RX_BUFFERS 124 +#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) + +#define TX_RING_SIZE 256 // min 64 max 4096 +#define STATUS_RING_SIZE 1024 // pow2 > (2*Rx + Tx) +#define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) +#define ETH_JUMBO_MTU 9000 +#define TX_WATCHDOG (5 * HZ) +#define NAPI_WEIGHT 64 +#define PHY_RETRIES 1000 + +static const u32 default_msg = + NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK + | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR + | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static const struct pci_device_id sky2_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, sky2_id_table); + +/* Avoid conditionals by using array */ +static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; +static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; + +static inline const char *chip_name(u8 chip_id) +{ + switch (chip_id) { + case CHIP_ID_GENESIS: + return "Genesis"; + case CHIP_ID_YUKON: + return "Yukon"; + case CHIP_ID_YUKON_LITE: + return "Yukon-Lite"; + case CHIP_ID_YUKON_LP: + return "Yukon-LP"; + case CHIP_ID_YUKON_XL: + return "Yukon-XL"; + case CHIP_ID_YUKON_EC: + return "Yukon-EC"; + case CHIP_ID_YUKON_FE: + return "Yukon-FE"; + default: + return "???"; + } +} + +static void gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) +{ + int i; + + gma_write16(hw, port, GM_SMI_DATA, val); + gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); + + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + + if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + break; + } +} + +static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) +{ + int i; + + gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) + | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); + + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) + goto ready; + } + + printk(KERN_WARNING PFX "%s: phy read timeout\n", + hw->dev[port]->name); + ready: + return gma_read16(hw, port, GM_SMI_DATA); +} + +static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) +{ + u16 reg; + + /* disable all GMAC IRQ's */ + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); + /* disable PHY IRQs */ + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + gma_write16(hw, port, GM_MC_ADDR_H2, 0); + gma_write16(hw, port, GM_MC_ADDR_H3, 0); + gma_write16(hw, port, GM_MC_ADDR_H4, 0); + + reg = gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA; + gma_write16(hw, port, GM_RX_CTRL, reg); +} + +static void sky2_phy_init(struct sky2_hw *hw, unsigned port) +{ + struct sky2_port *sky2 = netdev_priv(hw->dev[port]); + u16 ctrl, ct1000, adv; + u16 ledctrl, ledover; + + pr_debug("phy reset autoneg=%s advertising=0x%x pause rx=%s tx=%s\n", + sky2->autoneg == AUTONEG_ENABLE ? "enable" : "disable", + sky2->advertising, + sky2->rx_pause ? "on" : "off", + sky2->tx_pause ? "on" : "off"); + + if (sky2->autoneg == AUTONEG_ENABLE && + hw->chip_id != CHIP_ID_YUKON_XL) { + u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + + ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); + + if (hw->chip_id == CHIP_ID_YUKON_EC) + ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; + else + ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3); + + gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + } + + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + if (hw->copper) { + if (hw->chip_id == CHIP_ID_YUKON_FE) { + /* enable automatic crossover */ + ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; + } else { + /* disable energy detect */ + ctrl &= ~PHY_M_PC_EN_DET_MSK; + + /* enable automatic crossover */ + ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); + + if (sky2->autoneg == AUTONEG_ENABLE && + hw->chip_id == CHIP_ID_YUKON_XL) { + ctrl &= ~PHY_M_PC_DSC_MSK; + ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; + } + } + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + } else { + /* workaround for deviation #4.88 (CRC errors) */ + /* disable Automatic Crossover */ + + ctrl &= ~PHY_M_PC_MDIX_MSK; + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + if (hw->chip_id == CHIP_ID_YUKON_XL) { + /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2); + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl &= ~PHY_M_MAC_MD_MSK; + ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + /* select page 1 to access Fiber registers */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); + } + + ctrl &= ~(PHY_M_PC_MDIX_MSK | PHY_M_MAC_MD_MSK); + ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); + } + + ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); + if (sky2->autoneg == AUTONEG_DISABLE) + ctrl &= ~PHY_CT_ANE; + else + ctrl |= PHY_CT_ANE; + + ctrl |= PHY_CT_RESET; + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + ctrl = 0; + ct1000 = 0; + adv = PHY_AN_CSMA; + + if (sky2->autoneg == AUTONEG_ENABLE) { + if (hw->copper) { + if (sky2->advertising & ADVERTISED_1000baseT_Full) + ct1000 |= PHY_M_1000C_AFD; + if (sky2->advertising & ADVERTISED_1000baseT_Half) + ct1000 |= PHY_M_1000C_AHD; + if (sky2->advertising & ADVERTISED_100baseT_Full) + adv |= PHY_M_AN_100_FD; + if (sky2->advertising & ADVERTISED_100baseT_Half) + adv |= PHY_M_AN_100_HD; + if (sky2->advertising & ADVERTISED_10baseT_Full) + adv |= PHY_M_AN_10_FD; + if (sky2->advertising & ADVERTISED_10baseT_Half) + adv |= PHY_M_AN_10_HD; + } else /* special defines for FIBER (88E1011S only) */ + adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + + /* Set Flow-control capabilities */ + if (sky2->tx_pause && sky2->rx_pause) + adv |= PHY_AN_PAUSE_CAP; /* symmetric */ + else if (sky2->rx_pause && !sky2->tx_pause) + adv |= PHY_AN_PAUSE_ASYM|PHY_AN_PAUSE_CAP; + else if (!sky2->rx_pause && sky2->tx_pause) + adv |= PHY_AN_PAUSE_ASYM; /* local */ + + /* Restart Auto-negotiation */ + ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + /* forced speed/duplex settings */ + ct1000 = PHY_M_1000C_MSE; + + if (sky2->duplex == DUPLEX_FULL) + ctrl |= PHY_CT_DUP_MD; + + switch (sky2->speed) { + case SPEED_1000: + ctrl |= PHY_CT_SP1000; + break; + case SPEED_100: + ctrl |= PHY_CT_SP100; + break; + } + + ctrl |= PHY_CT_RESET; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE) + gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + /* Setup Phy LED's */ + ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); + ledover = 0; + + switch (hw->chip_id) { + case CHIP_ID_YUKON_FE: + /* on 88E3082 these bits are at 11..9 (shifted left) */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; + + ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR); + + /* delete ACT LED control bits */ + ctrl &= ~PHY_M_FELP_LED1_MSK; + /* change ACT LED control to blink mode */ + ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL); + gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); + break; + + case CHIP_ID_YUKON_XL: + ctrl = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + + /* select page 3 to access LED control register */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + + /* set LED Function Control register */ + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ + PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ + PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ + PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ + + /* set Polarity Control register */ + gm_phy_write(hw, port, PHY_MARV_PHY_STAT, + (PHY_M_POLC_LS1_P_MIX(4) | PHY_M_POLC_IS0_P_MIX(4) | + PHY_M_POLC_LOS_CTRL(2) | PHY_M_POLC_INIT_CTRL(2) | + PHY_M_POLC_STA1_CTRL(2) | PHY_M_POLC_STA0_CTRL(2))); + + /* restore page register */ + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, ctrl); + break; + + default: + /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + } + + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + + if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { + /* turn on 100 Mbps LED (LED_LINK100) */ + ledover |= PHY_M_LED_MO_100(MO_LED_ON); + } + + if (ledover) + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + + /* Enable phy interrupt on autonegotiation complete (or link up) */ + if (sky2->autoneg == AUTONEG_ENABLE) + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + else + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); +} + +static void sky2_mac_init(struct sky2_hw *hw, unsigned port) +{ + struct sky2_port *sky2 = netdev_priv(hw->dev[port]); + u16 reg; + int i; + const u8 *addr = hw->dev[port]->dev_addr; + + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); + + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 + && port == 1) { + /* WA DEV_472 -- looks like crossed wires on port 2 */ + /* clear GMAC 1 Control reset */ + sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); + do { + sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET); + sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR); + } while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL || + gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 || + gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); + } + + + if (sky2->autoneg == AUTONEG_DISABLE) { + reg = gma_read16(hw, port, GM_GP_CTRL); + reg |= GM_GPCR_AU_ALL_DIS; + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); + + + switch (sky2->speed) { + case SPEED_1000: + reg |= GM_GPCR_SPEED_1000; + /* fallthru */ + case SPEED_100: + reg |= GM_GPCR_SPEED_100; + } + + if (sky2->duplex == DUPLEX_FULL) + reg |= GM_GPCR_DUP_FULL; + } else + reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; + + if (!sky2->tx_pause && !sky2->rx_pause) { + sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } else if (sky2->tx_pause &&!sky2->rx_pause) { + /* disable Rx flow-control */ + reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } + + gma_write16(hw, port, GM_GP_CTRL, reg); + + sky2_read16(hw, GMAC_IRQ_SRC); + + spin_lock_bh(&hw->phy_lock); + sky2_phy_init(hw, port); + spin_unlock_bh(&hw->phy_lock); + + /* MIB clear */ + reg = gma_read16(hw, port, GM_PHY_ADDR); + gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + + for (i = 0; i < GM_MIB_CNT_SIZE; i++) + gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + gma_write16(hw, port, GM_PHY_ADDR, reg); + + /* transmit control */ + gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + + /* receive control reg: unicast + multicast + no FCS */ + gma_write16(hw, port, GM_RX_CTRL, + GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); + + /* transmit flow control */ + gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + + /* transmit parameter */ + gma_write16(hw, port, GM_TX_PARAM, + TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | + TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | + TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | + TX_BACK_OFF_LIM(TX_BOF_LIM_DEF)); + + /* serial mode register */ + reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + + if (hw->dev[port]->mtu > 1500) + reg |= GM_SMOD_JUMBO_ENA; + + gma_write16(hw, port, GM_SERIAL_MODE, reg); + + /* physical address: used for pause frames */ + gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + /* virtual address for data */ + gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + + /* enable interrupt mask for counter overflows */ + gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + + /* Configure Rx MAC FIFO */ + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), + GMF_OPER_ON | GMF_RX_F_FL_ON); + + reg = RX_FF_FL_DEF_MSK; + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1) + reg = 0; /* WA Dev #4115 */ + + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg); + /* Set threshold to 0xa (64 bytes) + * ASF disabled so no need to do WA dev #4.30 + */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); + + /* Turn off Rx fifo flush (per sk98lin) */ + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_F_FL_OFF); +} + +static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) +{ + u32 end; + + start /= 8; + len /= 8; + end = start + len - 1; + pr_debug("ramset q=%d start=0x%x end=0x%x\n", q, start, end); + + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); + sky2_write32(hw, RB_ADDR(q, RB_START), start); + sky2_write32(hw, RB_ADDR(q, RB_END), end); + sky2_write32(hw, RB_ADDR(q, RB_WP), start); + sky2_write32(hw, RB_ADDR(q, RB_RP), start); + + if (q == Q_R1 || q == Q_R2) { + /* Set thresholds on receive queue's */ + sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), + start + (2*len)/3); + sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), + start + (len/3)); + } else { + /* Enable store & forward on Tx queue's because + * Tx FIFO is only 1K on Yukon + */ + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); + } + + sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); +} + + +/* Setup Bus Memory Interface */ +static void sky2_qset(struct sky2_hw *hw, u16 q, u32 wm) +{ + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); + sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); + sky2_write32(hw, Q_ADDR(q, Q_WM), wm); +} + + +/* Setup prefetch unit registers. This is the interface between + * hardware and driver list elements + */ +static inline void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, + u64 addr, u32 last) +{ + pr_debug("sky2 prefetch init q=%x addr=%llx last=%x\n", + Y2_QADDR(qaddr, 0), addr, last); + + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr); + sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); +} + + +/* + * This is a workaround code taken from syskonnect sk98lin driver + * to deal with chip bug in the wraparound case. + */ +static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, + u16 idx, u16 *last, u16 size) + +{ + BUG_ON(idx >= size); + + wmb(); + if (is_ec_a1(hw) && idx < *last) { + u16 hwget = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); + + if (hwget == 0) { + /* Start prefetching again */ + sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), + 0xe0); + goto setnew; + } + + if (hwget == size-1) { + /* set watermark to one list element */ + sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 8); + + /* set put index to first list element */ + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), 0); + } else /* have hardware go to end of list */ + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), size-1); + } else { + setnew: + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); + *last = idx; + } +} + +static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) +{ + struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; + sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE; + return le; +} + +static inline void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map, u16 len) +{ + struct sky2_rx_le *le; + + if (sizeof(map) > sizeof(u32)) { + le = sky2_next_rx(sky2); + le->rx.addr = cpu_to_le32((u64) map >> 32); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + } + + le = sky2_next_rx(sky2); + le->rx.addr = cpu_to_le32((u32) map); + le->length = cpu_to_le16(len); + le->ctrl = 0; + le->opcode = OP_PACKET | HW_OWNER; +} + +/* Tell chip where to start receive checksum. + * Actually has two checksums, but set both same to avoid possible byte + * order problems. + */ +static void sky2_rx_set_offset(struct sky2_port *sky2) +{ + struct sky2_rx_le *le; + + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + + le = sky2_next_rx(sky2); + le->rx.csum.start1 = ETH_HLEN; + le->rx.csum.start2 = ETH_HLEN; + le->ctrl = 0; + le->opcode = OP_TCPSTART | HW_OWNER; + wmb(); + sky2_write16(sky2->hw, + Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX), + sky2->rx_put); + +} + +/* Cleanout receive buffer area, assumes receiver hardware stopped */ +static void sky2_rx_clean(struct sky2_port *sky2) +{ + unsigned i; + + memset(sky2->rx_le, 0, RX_LE_BYTES); + for (i = 0; i < sky2->rx_ring_size; i++) { + struct ring_info *re = sky2->rx_ring + i; + + if (re->skb) { + pci_unmap_single(sky2->hw->pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_FROMDEVICE); + kfree_skb(re->skb); + re->skb = NULL; + } + } +} + +static inline struct sk_buff *sky2_rx_alloc_skb(struct sky2_port *sky2, + unsigned int size, int gfp_mask) +{ + struct sk_buff *skb; + + skb = alloc_skb(size, gfp_mask); + if (likely(skb)) { + skb->dev = sky2->netdev; + skb_reserve(skb, NET_IP_ALIGN); + } + return skb; +} + +/* + * Allocate and setup receiver buffer pool. + * In case of 64 bit dma, there are 2X as many list elements + * available as ring entries + * and need to reserve one list element so we don't wrap around. + */ +static int sky2_rx_fill(struct sky2_port *sky2) +{ + unsigned i; + unsigned int rx_buf_size = sky2->netdev->mtu + ETH_HLEN + 8; + + pr_debug("sky2_rx_fill %d\n", sky2->rx_ring_size); + for (i = 0; i < sky2->rx_ring_size; i++) { + struct ring_info *re = sky2->rx_ring + i; + dma_addr_t paddr; + + re->skb = sky2_rx_alloc_skb(sky2, rx_buf_size, GFP_KERNEL); + if (!re->skb) + goto nomem; + + paddr = pci_map_single(sky2->hw->pdev, re->skb->data, + rx_buf_size, PCI_DMA_FROMDEVICE); + + pci_unmap_len_set(re, maplen, rx_buf_size); + pci_unmap_addr_set(re, mapaddr, paddr); + sky2_rx_add(sky2, paddr, rx_buf_size); + } + + sky2_write16(sky2->hw, + Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX), + sky2->rx_put); + + return 0; +nomem: + sky2_rx_clean(sky2); + return -ENOMEM; +} + +/* Bring up network interface. */ +static int sky2_up(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u32 ramsize, rxspace; + int err = -ENOMEM; + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + + /* must be power of 2 */ + sky2->tx_le = pci_alloc_consistent(hw->pdev, + TX_RING_SIZE * sizeof(struct sky2_tx_le), + &sky2->tx_le_map); + if (!sky2->tx_le) + goto err_out; + + sky2->tx_ring = kmalloc(TX_RING_SIZE * sizeof(struct ring_info), + GFP_KERNEL); + if (!sky2->tx_ring) + goto err_out; + sky2->tx_prod = sky2->tx_cons = 0; + memset(sky2->tx_ring, 0, TX_RING_SIZE * sizeof(struct ring_info)); + + sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, + &sky2->rx_le_map); + if (!sky2->rx_le) + goto err_out; + memset(sky2->rx_le, 0, RX_LE_BYTES); + + sky2->rx_ring = kmalloc(sky2->rx_ring_size * sizeof(struct ring_info), + GFP_KERNEL); + if (!sky2->rx_ring) + goto err_out; + + sky2_mac_init(hw, port); + + /* Configure RAM buffers */ + if (hw->chip_id == CHIP_ID_YUKON_FE || + (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == 2)) + ramsize = 4096; + else { + u8 e0 = sky2_read8(hw, B2_E_0); + ramsize = (e0 == 0) ? (128*1024) : (e0 * 4096); + } + + /* 2/3 for Rx */ + rxspace = (2 * ramsize) / 3; + sky2_ramset(hw, rxqaddr[port], 0, rxspace); + sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); + + sky2_qset(hw, rxqaddr[port], is_pciex(hw) ? 0x80 : 0x600); + sky2_qset(hw, txqaddr[port], 0x600); + + sky2->rx_put = sky2->rx_next = 0; + sky2_prefetch_init(hw, rxqaddr[port], sky2->rx_le_map, RX_LE_SIZE-1); + + sky2_rx_set_offset(sky2); + + err = sky2_rx_fill(sky2); + if (err) + goto err_out; + + sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, + TX_RING_SIZE - 1); + + /* Enable interrupts from phy/mac for port */ + hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + return 0; + +err_out: + if (sky2->rx_le) + pci_free_consistent(hw->pdev, RX_LE_BYTES, + sky2->rx_le, sky2->rx_le_map); + if (sky2->tx_le) + pci_free_consistent(hw->pdev, + TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_le, sky2->tx_le_map); + if (sky2->tx_ring) + kfree(sky2->tx_ring); + if (sky2->rx_ring) + kfree(sky2->rx_ring); + + return err; +} + +/* + * Worst case number of list elements is 36 + * TSO + CHKSUM + ADDR64 + BUFFER + (ADDR+BUFFER)*MAXFRAGS + */ +#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS) + +static inline int sky2_xmit_avail(const struct sky2_port *sky2) +{ + return (sky2->tx_cons > sky2->tx_prod ? 0 : TX_RING_SIZE) + + sky2->tx_cons - sky2->tx_prod - 1; +} + +static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) +{ + struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; + sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE; + return le; +} + +/* Put one frame in ring for transmit. */ +static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + struct sky2_tx_le *le; + struct ring_info *re; + unsigned i, len; + dma_addr_t mapping; + u32 addr64; + u16 mss; + u8 ctrl; + + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) + return NETDEV_TX_OK; + + if (!spin_trylock(&sky2->tx_lock)) + return NETDEV_TX_LOCKED; + + if (unlikely(sky2_xmit_avail(sky2) < MAX_SKB_TX_LE)) { + netif_stop_queue(dev); + spin_unlock(&sky2->tx_lock); + + printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_msg_tx_queued(sky2)) + printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", + dev->name, sky2->tx_prod, skb->len); + + + len = skb_headlen(skb); + mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + + /* Check for TCP Segmentation Offload */ + mss = skb_shinfo(skb)->tso_size; + if (mss) { + /* just drop the packet if non-linear expansion fails */ + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + mss += ((skb->h.th->doff - 5) * 4); /* TCP options */ + mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); + mss += ETH_HLEN; + + le = get_tx_le(sky2); + le->tx.tso.size = cpu_to_le16(mss); + le->ctrl = 0; + le->opcode = OP_LRGLEN | HW_OWNER; + } + + /* Handle Hi DMA */ + if (sizeof(mapping) > sizeof(u32)) { + addr64 = (u64)mapping >> 32; + + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(addr64); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + } + + /* Handle TCP checksum offload */ + ctrl = 0; + if (skb->ip_summed == CHECKSUM_HW) { + ptrdiff_t hdr = skb->h.raw - skb->data; + + ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; + if (skb->nh.iph->protocol == IPPROTO_UDP) + ctrl |= UDPTCP; + + le = get_tx_le(sky2); + le->tx.csum.start = cpu_to_le16(hdr); + le->tx.csum.offset = cpu_to_le16(hdr + skb->csum); + le->length = 0; + le->ctrl = 1; /* one packet */ + le->opcode = OP_TCPLISW|HW_OWNER; + } + + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32((u32) mapping); + le->length = cpu_to_le16(len); + le->ctrl = ctrl; + le->opcode = (mss ? OP_LARGESEND : OP_PACKET) |HW_OWNER; + + re = &sky2->tx_ring[le - sky2->tx_le]; + re->skb = skb; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, len); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + + if (sizeof(mapping) > sizeof(u32)) { + u32 hi = (u64) mapping >> 32; + if (hi != addr64) { + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(hi); + le->ctrl = 0; + le->opcode = OP_ADDR64|HW_OWNER; + addr64 = hi; + } + } + + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32((u32) mapping); + le->length = cpu_to_le16(frag->size); + le->ctrl = ctrl; + le->opcode = OP_BUFFER|HW_OWNER; + + re = &sky2->tx_ring[le - sky2->tx_le]; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, frag->size); + } + + le->ctrl |= EOP; + + sky2_put_idx(sky2->hw, txqaddr[sky2->port], sky2->tx_prod, + &sky2->tx_last_put, TX_RING_SIZE); + + if (sky2_xmit_avail(sky2) < MAX_SKB_TX_LE) { + pr_debug("%s: transmit queue full\n", dev->name); + netif_stop_queue(dev); + } + spin_unlock(&sky2->tx_lock); + + dev->trans_start = jiffies; + return NETDEV_TX_OK; +} + + +/* + * Free ring elements from starting at tx_cons until done + * This unwinds the elements based on the usage assigned + * xmit routine. + */ +static void sky2_tx_complete(struct net_device *dev, u16 done) +{ + struct sky2_port *sky2 = netdev_priv(dev); + unsigned idx = sky2->tx_cons; + struct sk_buff *skb = NULL; + + BUG_ON(done >= TX_RING_SIZE); + + spin_lock(&sky2->tx_lock); + while (idx != done) { + struct ring_info *re = sky2->tx_ring + idx; + struct sky2_tx_le *le = sky2->tx_le + idx; + + BUG_ON(le->opcode == 0); + + switch(le->opcode & ~HW_OWNER) { + case OP_LARGESEND: + case OP_PACKET: + if (skb) + dev_kfree_skb_any(skb); + skb = re->skb; + BUG_ON(!skb); + re->skb = NULL; + + pci_unmap_single(sky2->hw->pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); + break; + + case OP_BUFFER: + pci_unmap_page(sky2->hw->pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); + break; + } + + le->opcode = 0; + idx = (idx + 1) % TX_RING_SIZE; + } + + if (skb) + dev_kfree_skb_any(skb); + sky2->tx_cons = idx; + + if (sky2_xmit_avail(sky2) > MAX_SKB_TX_LE) + netif_wake_queue(dev); + spin_unlock(&sky2->tx_lock); +} + +/* Cleanup all untransmitted buffers, assume transmitter not running */ +static inline void sky2_tx_clean(struct sky2_port *sky2) +{ + sky2_tx_complete(sky2->netdev, sky2->tx_prod); +} + +/* Network shutdown */ +static int sky2_down(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 ctrl; + int i; + + if (netif_msg_ifdown(sky2)) + printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); + + netif_stop_queue(dev); + + /* Stop transmitter */ + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); + sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); + + sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), + RB_RST_SET|RB_DIS_OP_MD); + + ctrl = gma_read16(hw, port, GM_GP_CTRL); + ctrl &= ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA); + gma_write16(hw, port, GM_GP_CTRL, ctrl); + + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + + /* Workaround shared GMAC reset */ + if (! (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 + && port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); + + /* Disable Force Sync bit and Enable Alloc bit */ + sky2_write8(hw, SK_REG(port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); + sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); + + /* Reset the PCI FIFO of the async Tx queue */ + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + + /* Reset the Tx prefetch units */ + sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), + PREF_UNIT_RST_SET); + + sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); + + /* + * The RX Stop command will not work for Yukon-2 if the BMU does not + * reach the end of packet and since we can't make sure that we have + * incoming data, we must reset the BMU while it is not doing a DMA + * transfer. Since it is possible that the RX path is still active, + * the RX RAM buffer will be stopped first, so any possible incoming + * data will not trigger a DMA. After the RAM buffer is stopped, the + * BMU is polled until any DMA in progress is ended and only then it + * will be reset. + */ + + /* disable the RAM Buffer receive queue */ + sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_DIS_OP_MD); + + for (i = 0; i < 0xffff; i++) + if (sky2_read8(hw, RB_ADDR(rxqaddr[port], Q_RSL)) + == sky2_read8(hw, RB_ADDR(rxqaddr[port], Q_RL))) + break; + + sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), + BMU_RST_SET | BMU_FIFO_RST); + /* reset the Rx prefetch unit */ + sky2_write32(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_CTRL), + PREF_UNIT_RST_SET); + + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + + /* turn off led's */ + sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + + sky2_tx_clean(sky2); + sky2_rx_clean(sky2); + + pci_free_consistent(hw->pdev, RX_LE_BYTES, + sky2->rx_le, sky2->rx_le_map); + kfree(sky2->rx_ring); + + pci_free_consistent(hw->pdev, + TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_le, sky2->tx_le_map); + kfree(sky2->tx_ring); + + return 0; +} + +static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) +{ + if (hw->chip_id == CHIP_ID_YUKON_FE) + return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + + switch (aux & PHY_M_PS_SPEED_MSK) { + case PHY_M_PS_SPEED_1000: + return SPEED_1000; + case PHY_M_PS_SPEED_100: + return SPEED_100; + default: + return SPEED_10; + } +} + +static void sky2_link_up(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + /* Enable Transmit FIFO Underrun */ + sky2_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); + + reg = gma_read16(hw, port, GM_GP_CTRL); + if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE) + reg |= GM_GPCR_DUP_FULL; + + + /* enable Rx/Tx */ + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); + + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + + netif_carrier_on(sky2->netdev); + netif_wake_queue(sky2->netdev); + + /* Turn on link LED */ + sky2_write8(hw, SK_REG(port, LNK_LED_REG), + LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); + + if (netif_msg_link(sky2)) + printk(KERN_INFO PFX + "%s: Link is up at %d Mbps, %s duplex, flowcontrol %s\n", + sky2->netdev->name, sky2->speed, + sky2->duplex == DUPLEX_FULL ? "full" : "half", + (sky2->tx_pause && sky2->rx_pause) ? "both" : + sky2->tx_pause ? "tx" : + sky2->rx_pause ? "rx" : "none"); +} + +static void sky2_link_down(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 reg; + + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + + reg = gma_read16(hw, port, GM_GP_CTRL); + reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); + gma_write16(hw, port, GM_GP_CTRL, reg); + gma_read16(hw, port, GM_GP_CTRL); /* PCI post */ + + if (sky2->rx_pause && !sky2->tx_pause) { + /* restore Asymmetric Pause bit */ + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + gm_phy_read(hw, port, + PHY_MARV_AUNE_ADV) + | PHY_M_AN_ASP); + } + + sky2_phy_reset(hw, port); + + netif_carrier_off(sky2->netdev); + netif_stop_queue(sky2->netdev); + + /* Turn on link LED */ + sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); + + if (netif_msg_link(sky2)) + printk(KERN_INFO PFX "%s: Link is down.\n", sky2->netdev->name); + sky2_phy_init(hw, port); +} + + +/* + * Interrrupt from PHY are handled in tasklet (soft irq) + * because accessing phy registers requires spin wait which might + * cause excess interrupt latency. + */ +static void sky2_phy_task(unsigned long data) +{ + struct sky2_port *sky2 = (struct sky2_port *) data; + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 istatus, phystat; + + istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); + + phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + + if (netif_msg_intr(sky2)) + printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", + sky2->netdev->name, istatus, phystat); + + if (istatus & PHY_M_IS_AN_COMPL) { + u16 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); + + if (lpa & PHY_M_AN_RF) { + printk(KERN_ERR PFX "%s: remote fault", + sky2->netdev->name); + } + else if (hw->chip_id != CHIP_ID_YUKON_FE + && gm_phy_read(hw, port, PHY_MARV_1000T_STAT) + & PHY_B_1000S_MSF) { + printk(KERN_ERR PFX "%s: master/slave fault", + sky2->netdev->name); + } + else if (!(phystat & PHY_M_PS_SPDUP_RES)) { + printk(KERN_ERR PFX "%s: speed/duplex mismatch", + sky2->netdev->name); + } + else { + sky2->duplex = (phystat & PHY_M_PS_FULL_DUP) + ? DUPLEX_FULL : DUPLEX_HALF; + + sky2->speed = sky2_phy_speed(hw, phystat); + + sky2->tx_pause = (phystat & PHY_M_PS_TX_P_EN) != 0; + sky2->rx_pause = (phystat & PHY_M_PS_RX_P_EN) != 0; + + if ((!sky2->tx_pause && !sky2->rx_pause) || + (sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + else + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + sky2_link_up(sky2); + } + } else { + + if (istatus & PHY_M_IS_LSP_CHANGE) + sky2->speed = sky2_phy_speed(hw, phystat); + + if (istatus & PHY_M_IS_DUP_CHANGE) + sky2->duplex = (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + if (istatus & PHY_M_IS_LST_CHANGE) { + if (phystat & PHY_M_PS_LINK_UP) + sky2_link_up(sky2); + else + sky2_link_down(sky2); + } + } + + local_irq_disable(); + hw->intr_mask |= (port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); +} + +static void sky2_tx_timeout(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + if (netif_msg_timer(sky2)) + printk(KERN_ERR PFX "%s: tx timeout\n", dev->name); + + sky2_write32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR), BMU_STOP); + sky2_read32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR)); + + sky2_tx_clean(sky2); +} + +static int sky2_change_mtu(struct net_device *dev, int new_mtu) +{ + int err = 0; + + if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + return -EINVAL; + + if (netif_running(dev)) + sky2_down(dev); + + dev->mtu = new_mtu; + + if (netif_running(dev)) + err = sky2_up(dev); + + return err; +} + +/* + * Receive one packet. + * For small packets or errors, just reuse existing skb. + * For larger pakects, get new buffer. + */ +static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, + u16 length, u32 status) +{ + struct net_device *dev = hw->dev[port]; + struct sky2_port *sky2 = netdev_priv(dev); + struct ring_info *re = sky2->rx_ring + sky2->rx_next; + struct sk_buff *skb = re->skb; + dma_addr_t mapping; + const unsigned int rx_buf_size = dev->mtu + ETH_HLEN + 8; + + if (unlikely(netif_msg_rx_status(sky2))) + printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", + dev->name, sky2->rx_next, status, length); + + sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_ring_size; + + pci_unmap_single(sky2->hw->pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_FROMDEVICE); + prefetch(skb->data); + + if (!(status & GMR_FS_RX_OK) + || (status & GMR_FS_ANY_ERR) + || (length << 16) != (status & GMR_FS_LEN) + || length > rx_buf_size) + goto error; + + re->skb = sky2_rx_alloc_skb(sky2, rx_buf_size, GFP_ATOMIC); + if (!re->skb) + goto reuse; + +submit: + mapping = pci_map_single(sky2->hw->pdev, re->skb->data, + rx_buf_size, PCI_DMA_FROMDEVICE); + + pci_unmap_len_set(re, maplen, rx_buf_size); + pci_unmap_addr_set(re, mapaddr, mapping); + + sky2_rx_add(sky2, mapping, rx_buf_size); + sky2_put_idx(sky2->hw, rxqaddr[sky2->port], + sky2->rx_put, &sky2->rx_last_put, RX_LE_SIZE); + + return skb; + +error: + if (netif_msg_rx_err(sky2)) + printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", + sky2->netdev->name, status, length); + + if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + sky2->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + sky2->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + sky2->net_stats.rx_crc_errors++; +reuse: + re->skb = skb; + skb = NULL; + goto submit; +} + +static u16 get_tx_index(u8 port, u32 status, u16 len) +{ + if (port == 0) + return status & 0xfff; + else + return ((status >> 24) & 0xff) | (len & 0xf) << 8; +} + +/* + * NAPI poll routine. + * Both ports share the same status interrupt, therefore there is only + * one poll routine. + * + */ +static int sky2_poll(struct net_device *dev, int *budget) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned int to_do = min(dev->quota, *budget); + unsigned int work_done = 0; + unsigned char summed[2] = { CHECKSUM_NONE, CHECKSUM_NONE }; + unsigned int csum[2] = { 0 }; + unsigned int rx_handled[2] = { 0, 0}; + u16 last; + + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + last = sky2_read16(hw, STAT_PUT_IDX); + + while (hw->st_idx != last && work_done < to_do) { + struct sky2_status_le *le = hw->st_le + hw->st_idx; + struct sk_buff *skb; + u8 port; + u32 status; + u16 length; + + rmb(); + status = le32_to_cpu(le->status); + length = le16_to_cpu(le->length); + port = le->link; + + BUG_ON(port >= hw->ports); + + switch(le->opcode & ~HW_OWNER) { + case OP_RXSTAT: + ++rx_handled[port]; + skb = sky2_receive(hw, port, length, status); + if (likely(skb)) { + __skb_put(skb, length); + skb->protocol = eth_type_trans(skb, dev); + + /* Add hw checksum if available */ + skb->ip_summed = summed[port]; + skb->csum = csum[port]; + + /* Clear for next packet */ + csum[port] = 0; + summed[port] = CHECKSUM_NONE; + + netif_receive_skb(skb); + + dev->last_rx = jiffies; + ++work_done; + } + break; + + case OP_RXCHKS: + /* Save computed checksum for next rx */ + csum[port] = le16_to_cpu(status & 0xffff); + summed[port] = CHECKSUM_HW; + break; + + case OP_TXINDEXLE: + sky2_tx_complete(hw->dev[port], + get_tx_index(port, status, length)); + break; + + case OP_RXTIMESTAMP: + break; + + default: + if (net_ratelimit()) + printk(KERN_WARNING PFX "unknown status opcode 0x%x\n", + le->opcode); + break; + } + + hw->st_idx = (hw->st_idx + 1) & (STATUS_RING_SIZE -1); + } + + *budget -= work_done; + dev->quota -= work_done; + if (work_done < to_do) { + /* + * Another chip workaround, need to restart TX timer if status + * LE was handled. WA_DEV_43_418 + */ + if (is_ec_a1(hw)) { + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } + + hw->intr_mask |= Y2_IS_STAT_BMU; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + netif_rx_complete(dev); + } + + return work_done >= to_do; + +} + +static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) +{ + struct net_device *dev = hw->dev[port]; + + printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n", + dev->name, status); + + if (status & Y2_IS_PAR_RD1) { + printk(KERN_ERR PFX "%s: ram data read parity error\n", + dev->name); + /* Clear IRQ */ + sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR); + } + + if (status & Y2_IS_PAR_WR1) { + printk(KERN_ERR PFX "%s: ram data write parity error\n", + dev->name); + + sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR); + } + + if (status & Y2_IS_PAR_MAC1) { + printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name); + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE); + } + + if (status & Y2_IS_PAR_RX1) { + printk(KERN_ERR PFX "%s: RX parity error\n", dev->name); + sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR); + } + + if (status & Y2_IS_TCP_TXA1) { + printk(KERN_ERR PFX "%s: TCP segmentation error\n", dev->name); + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP); + } +} + +static void sky2_hw_intr(struct sky2_hw *hw) +{ + u32 status = sky2_read32(hw, B0_HWE_ISRC); + + if (status & Y2_IS_TIST_OV) { + pr_debug (PFX "%s: unused timer overflow??\n", + pci_name(hw->pdev)); + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + } + + if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { + u16 pci_err = sky2_read16(hw, PCI_C(PCI_STATUS)); + printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", + pci_name(hw->pdev), pci_err); + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + sky2_write16(hw, PCI_C(PCI_STATUS), + pci_err | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + } + + if (status & Y2_IS_PCI_EXP) { + /* PCI-Express uncorrectable Error occured */ + u32 pex_err = sky2_read32(hw, PCI_C(PEX_UNC_ERR_STAT)); + + /* + * On PCI-Express bus bridges are called root complexes. + * PCI-Express errors are recognized by the root complex too, + * which requests the system to handle the problem. After error + * occurence it may be that no access to the adapter may be performed + * any longer. + */ + printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", + pci_name(hw->pdev), pex_err); + + /* clear the interrupt */ + sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + sky2_write32(hw, PCI_C(PEX_UNC_ERR_STAT), 0xffffffffUL); + sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + if (pex_err & PEX_FATAL_ERRORS) { + u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); + hwmsk &= ~Y2_IS_PCI_EXP; + sky2_write32(hw, B0_HWE_IMSK, hwmsk); + } + } + + if (status & Y2_HWE_L1_MASK) + sky2_hw_error(hw, 0, status); + status >>= 8; + if (status & Y2_HWE_L1_MASK) + sky2_hw_error(hw, 1, status); +} + +static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) +{ + struct net_device *dev = hw->dev[port]; + struct sky2_port *sky2 = netdev_priv(dev); + u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); + + if (netif_msg_intr(sky2)) + printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n", + dev->name, status); + + if (status & GM_IS_RX_FF_OR) { + ++sky2->net_stats.rx_fifo_errors; + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); + } + + if (status & GM_IS_TX_FF_UR) { + ++sky2->net_stats.tx_fifo_errors; + sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); + } + +} + +static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) +{ + struct net_device *dev = hw->dev[port]; + struct sky2_port *sky2 = netdev_priv(dev); + + hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + tasklet_schedule(&sky2->phy_task); +} + +static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct sky2_hw *hw = dev_id; + u32 status; + + status = sky2_read32(hw, B0_Y2_SP_ISRC2); + if (status == 0 || status == ~0) /* hotplug or shared irq */ + return IRQ_NONE; + + if (status & Y2_IS_HW_ERR) + sky2_hw_intr(hw); + + if ((status & Y2_IS_STAT_BMU) && netif_rx_schedule_prep(hw->dev[0])) { + hw->intr_mask &= ~Y2_IS_STAT_BMU; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_schedule(hw->dev[0]); + } + + if (status & Y2_IS_IRQ_PHY1) + sky2_phy_intr(hw, 0); + + if (status & Y2_IS_IRQ_PHY2) + sky2_phy_intr(hw, 1); + + if (status & Y2_IS_IRQ_MAC1) + sky2_mac_intr(hw, 0); + + if (status & Y2_IS_IRQ_MAC2) + sky2_mac_intr(hw, 1); + + + sky2_write32(hw, B0_Y2_SP_ICR, 2); + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sky2_netpoll(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + disable_irq(dev->irq); + sky2_intr(dev->irq, sky2->hw, NULL); + enable_irq(dev->irq); +} +#endif + +/* Chip internal frequency for clock calculations */ +static inline u32 sky2_khz(const struct sky2_hw *hw) +{ + switch(hw->chip_id) { + case CHIP_ID_YUKON_EC: + return 125000; /* 125 Mhz */ + case CHIP_ID_YUKON_FE: + return 100000; /* 100 Mhz */ + default: /* YUKON_XL */ + return 156000; /* 156 Mhz */ + } +} + +static inline u32 sky2_ms2clk(const struct sky2_hw *hw, u32 ms) +{ + return sky2_khz(hw) * ms; +} + +static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) +{ + return (sky2_khz(hw) * 75) / 1000; +} + +static int sky2_reset(struct sky2_hw *hw) +{ + u32 ctst, power; + u16 status; + u8 t8, pmd_type; + int i; + + ctst = sky2_read32(hw, B0_CTST); + + sky2_write8(hw, B0_CTST, CS_RST_CLR); + hw->chip_id = sky2_read8(hw, B2_CHIP_ID); + if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { + printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n", + pci_name(hw->pdev), hw->chip_id); + return -EOPNOTSUPP; + } + + /* disable ASF */ + if (hw->chip_id <= CHIP_ID_YUKON_EC) { + sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); + sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); + } + + /* do a SW reset */ + sky2_write8(hw, B0_CTST, CS_RST_SET); + sky2_write8(hw, B0_CTST, CS_RST_CLR); + + /* clear PCI errors, if any */ + status = sky2_read16(hw, PCI_C(PCI_STATUS)); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + sky2_write16(hw, PCI_C(PCI_STATUS), + status | PCI_STATUS_ERROR_BITS); + + sky2_write8(hw, B0_CTST, CS_MRST_CLR); + + /* clear any PEX errors */ + if (is_pciex(hw)) { + sky2_write32(hw, PCI_C(PEX_UNC_ERR_STAT), 0xffffffffUL); + sky2_read16(hw, PCI_C(PEX_LNK_STAT)); + } + + pmd_type = sky2_read8(hw, B2_PMD_TYP); + hw->copper = !(pmd_type == 'L' || pmd_type == 'S'); + + hw->ports = 1; + t8 = sky2_read8(hw, B2_Y2_HW_RES); + if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { + if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) + ++hw->ports; + } + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + /* switch power to VCC (WA for VAUX problem) */ + sky2_write8(hw, B0_POWER_CTRL, + PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + + /* disable Core Clock Division, */ + sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + /* enable bits are inverted */ + sky2_write8(hw, B2_Y2_CLK_GATE, + Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); + else + sky2_write8(hw, B2_Y2_CLK_GATE, 0); + + /* Turn off phy power saving */ + power = sky2_read32(hw, PCI_C(PCI_DEV_REG1)); + power &= ~(PCI_Y2_PHY1_POWD|PCI_Y2_PHY2_POWD); + + /* back asswards .. */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { + power |= PCI_Y2_PHY1_COMA; + if (hw->ports > 1) + power |= PCI_Y2_PHY2_COMA; + } + sky2_write32(hw, PCI_C(PCI_DEV_REG1), power); + + for (i = 0; i < hw->ports; i++) { + sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + sky2_write32(hw, B2_I2C_IRQ, 1); /* Clear I2C IRQ noise */ + + /* turn off hardware timer (unused) */ + sky2_write8(hw, B2_TI_CTRL, TIM_STOP); + sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); + + sky2_write8(hw, B0_Y2LED, LED_STAT_ON); + + /* Turn on descriptor polling -- is this necessary? */ + sky2_write32(hw, B28_DPT_INI, sky2_us2clk(hw, 75)); + sky2_write8(hw, B28_DPT_CTRL, DPT_START); + + /* Turn off receive timestamp */ + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); + + /* enable the Tx Arbiters */ + for (i = 0; i < hw->ports; i++) + sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); + + /* Initialize ram interface */ + for (i = 0; i < hw->ports; i++) { + sky2_write16(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); + + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); + } + + /* Optimize PCI Express access */ + if (is_pciex(hw)) { + u16 ctrl = sky2_read32(hw, PCI_C(PEX_DEV_CTRL)); + ctrl &= ~PEX_DC_MAX_RRS_MSK; + ctrl |= PEX_DC_MAX_RD_RQ_SIZE(4); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + sky2_write16(hw, PCI_C(PEX_DEV_CTRL), ctrl); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + } + + sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); + + hw->intr_mask = Y2_IS_BASE; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + + /* disable all GMAC IRQ's */ + sky2_write8(hw, GMAC_IRQ_MSK, 0); + + spin_lock_bh(&hw->phy_lock); + for (i = 0; i < hw->ports; i++) + sky2_phy_reset(hw, i); + spin_unlock_bh(&hw->phy_lock); + + /* Setup ring for status responses */ + hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, + &hw->st_dma); + if (!hw->st_le) + return -ENOMEM; + + memset(hw->st_le, 0, STATUS_LE_BYTES); + hw->st_idx = 0; + + sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET); + sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); + + sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); + sky2_write32(hw, STAT_LIST_ADDR_HI, (u64)hw->st_dma >> 32); + + /* Set the list last index */ + sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE-1); + + if (is_ec_a1(hw)) { + /* WA for dev. #4.3 */ + sky2_write16(hw, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK); + + /* set Status-FIFO watermark */ + sky2_write8(hw, STAT_FIFO_WM, 0x21); /* WA for dev. #4.18 */ + + /* set Status-FIFO ISR watermark */ + sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07);/* WA for dev. #4.18 */ + + /* WA for dev. #4.3 and #4.18 */ + /* set Status-FIFO Tx timer init value */ + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_ms2clk(hw, 10)); + } else { + /* + * Theses settings should avoid the + * temporary hanging of the status BMU. + * May be not all required... still under investigation... + */ + sky2_write16(hw, STAT_TX_IDX_TH, 0x000a); + + /* set Status-FIFO watermark */ + sky2_write8(hw, STAT_FIFO_WM, 0x10); + + /* set Status-FIFO ISR watermark */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) + sky2_write8(hw, STAT_FIFO_ISR_WM, 0x10); + + else /* WA 4109 */ + sky2_write8(hw, STAT_FIFO_ISR_WM, 0x04); + + sky2_write32(hw, STAT_ISR_TIMER_INI, 0x0190); + } + + /* enable the prefetch unit */ + /* operational bit not functional for Yukon-EC, but fixed in Yukon-2? */ + sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); + + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); + + return 0; +} + +static inline u32 sky2_supported_modes(const struct sky2_hw *hw) +{ + u32 modes; + if (hw->copper) { + modes = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id != CHIP_ID_YUKON_FE) + modes |= SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full; + } else + modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + return modes; +} + +static int sky2_get_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = sky2_supported_modes(hw); + ecmd->phy_address = PHY_ADDR_MARV; + if (hw->copper) { + ecmd->supported = SUPPORTED_10baseT_Half + + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + ecmd->port = PORT_TP; + } else + ecmd->port = PORT_FIBRE; + + ecmd->advertising = sky2->advertising; + ecmd->autoneg = sky2->autoneg; + ecmd->speed = sky2->speed; + ecmd->duplex = sky2->duplex; + return 0; +} + +static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + const struct sky2_hw *hw = sky2->hw; + u32 supported = sky2_supported_modes(hw); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + ecmd->advertising = supported; + sky2->duplex = -1; + sky2->speed = -1; + } else { + u32 setting; + + switch(ecmd->speed) { + case SPEED_1000: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_1000baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_1000baseT_Half; + else + return -EINVAL; + break; + case SPEED_100: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_100baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_100baseT_Half; + else + return -EINVAL; + break; + + case SPEED_10: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_10baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_10baseT_Half; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + if ((setting & supported) == 0) + return -EINVAL; + + sky2->speed = ecmd->speed; + sky2->duplex = ecmd->duplex; + } + + sky2->autoneg = ecmd->autoneg; + sky2->advertising = ecmd->advertising; + + if (netif_running(dev)) { + sky2_down(dev); + sky2_up(dev); + } + + return 0; +} + +static void sky2_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(sky2->hw->pdev)); +} + +static const struct sky2_stat { + char name[ETH_GSTRING_LEN]; + u16 offset; +} sky2_stats[] = { + { "tx_bytes", GM_TXO_OK_HI }, + { "rx_bytes", GM_RXO_OK_HI }, + { "tx_broadcast", GM_TXF_BC_OK }, + { "rx_broadcast", GM_RXF_BC_OK }, + { "tx_multicast", GM_TXF_MC_OK }, + { "rx_multicast", GM_RXF_MC_OK }, + { "tx_unicast", GM_TXF_UC_OK }, + { "rx_unicast", GM_RXF_UC_OK }, + { "tx_mac_pause", GM_TXF_MPAUSE }, + { "rx_mac_pause", GM_RXF_MPAUSE }, + { "collisions", GM_TXF_SNG_COL }, + { "late_collision",GM_TXF_LAT_COL }, + { "aborted", GM_TXF_ABO_COL }, + { "multi_collisions", GM_TXF_MUL_COL }, + { "fifo_underrun", GM_TXE_FIFO_UR }, + { "fifo_overflow", GM_RXE_FIFO_OV }, + { "rx_toolong", GM_RXF_LNG_ERR }, + { "rx_jabber", GM_RXF_JAB_PKT }, + { "rx_runt", GM_RXE_FRAG }, + { "rx_too_long", GM_RXF_LNG_ERR }, + { "rx_fcs_error", GM_RXF_FCS_ERR }, +}; + + +static u32 sky2_get_rx_csum(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + return sky2->rx_csum; +} + +static int sky2_set_rx_csum(struct net_device *dev, u32 data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + sky2->rx_csum = data; + sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), + data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); + + return 0; +} + +static u32 sky2_get_msglevel(struct net_device *netdev) +{ + struct sky2_port *sky2 = netdev_priv(netdev); + return sky2->msg_enable; +} + +static void sky2_phy_stats(struct sky2_port *sky2, u64 *data) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + int i; + + data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | (u64) gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | (u64) gma_read32(hw, port, GM_RXO_OK_LO); + + for (i = 2; i < ARRAY_SIZE(sky2_stats); i++) + data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset); +} + + +static void sky2_set_msglevel(struct net_device *netdev, u32 value) +{ + struct sky2_port *sky2 = netdev_priv(netdev); + sky2->msg_enable = value; +} + +static int sky2_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(sky2_stats); +} + +static void sky2_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + sky2_phy_stats(sky2, data); +} + +static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + + switch (stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(sky2_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + sky2_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + +/* Use hardware MIB variables for critical path statistics and + * transmit feedback not reported at interrupt. + * Other errors are accounted for in interrupt handler. + */ +static struct net_device_stats *sky2_get_stats(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + u64 data[ARRAY_SIZE(sky2_stats)]; + + sky2_phy_stats(sky2, data); + + sky2->net_stats.tx_bytes = data[0]; + sky2->net_stats.rx_bytes = data[1]; + sky2->net_stats.tx_packets = data[2] + data[4] + data[6]; + sky2->net_stats.rx_packets = data[3] + data[5] + data[7]; + sky2->net_stats.multicast = data[5] + data[7]; + sky2->net_stats.collisions = data[10]; + sky2->net_stats.tx_aborted_errors = data[12]; + + return &sky2->net_stats; +} + +static int sky2_set_mac_address(struct net_device *dev, void *p) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sockaddr *addr = p; + int err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + sky2_down(dev); + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port*8, + dev->dev_addr, ETH_ALEN); + memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port*8, + dev->dev_addr, ETH_ALEN); + if (dev->flags & IFF_UP) + err = sky2_up(dev); + return err; +} + +static void sky2_set_multicast(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + struct dev_mc_list *list = dev->mc_list; + u16 reg; + u8 filter[8]; + + memset(filter, 0, sizeof(filter)); + + reg = gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA; + + if (dev->flags & IFF_PROMISC) /* promiscious */ + reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + else if (dev->flags & IFF_ALLMULTI) /* all multicast */ + memset(filter, 0xff, sizeof(filter)); + else if (dev->mc_count == 0) /* no multicast */ + reg &= ~GM_RXCR_MCF_ENA; + else { + int i; + reg |= GM_RXCR_MCF_ENA; + + for (i = 0; list && i < dev->mc_count; i++, list = list->next) { + u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; + filter[bit/8] |= 1 << (bit%8); + } + } + + + gma_write16(hw, port, GM_MC_ADDR_H1, + (u16)filter[0] | ((u16)filter[1] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H2, + (u16)filter[2] | ((u16)filter[3] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H3, + (u16)filter[4] | ((u16)filter[5] << 8)); + gma_write16(hw, port, GM_MC_ADDR_H4, + (u16)filter[6] | ((u16)filter[7] << 8)); + + gma_write16(hw, port, GM_RX_CTRL, reg); +} + +/* Can have one global because blinking is controlled by + * ethtool and that is always under RTNL mutex + */ +static inline void sky2_led(struct sky2_hw *hw, unsigned port, int on) +{ + spin_lock_bh(&hw->phy_lock); + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + if (on) + gm_phy_write(hw, port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON)); + else + gm_phy_write(hw, port, PHY_MARV_LED_OVER, + + PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + + spin_unlock_bh(&hw->phy_lock); +} + +/* blink LED's for finding board */ +static int sky2_phys_id(struct net_device *dev, u32 data) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 ledctrl, ledover; + long ms; + int onoff = 1; + + if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); + else + ms = data * 1000; + + /* save initial values */ + spin_lock_bh(&hw->phy_lock); + ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); + ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); + spin_unlock_bh(&hw->phy_lock); + + while (ms > 0) { + sky2_led(hw, port, onoff); + onoff = !onoff; + + if (msleep_interruptible(250)) + break; /* interrupted */ + ms -= 250; + } + + /* resume regularly scheduled programming */ + spin_lock_bh(&hw->phy_lock); + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + spin_unlock_bh(&hw->phy_lock); + + return 0; +} + +static void sky2_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + ecmd->tx_pause = sky2->tx_pause; + ecmd->rx_pause = sky2->rx_pause; + ecmd->autoneg = sky2->autoneg; +} + +static int sky2_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + int err = 0; + + sky2->autoneg = ecmd->autoneg; + sky2->tx_pause = ecmd->tx_pause != 0; + sky2->rx_pause = ecmd->rx_pause != 0; + + if (netif_running(dev)) { + sky2_down(dev); + err = sky2_up(dev); + } + + return err; +} + +#ifdef CONFIG_PM +static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + wol->supported = WAKE_MAGIC; + wol->wolopts = sky2->wol ? WAKE_MAGIC : 0; +} + +static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + return -EOPNOTSUPP; + + sky2->wol = wol->wolopts == WAKE_MAGIC; + + if (sky2->wol) { + memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN); + + sky2_write16(hw, WOL_CTRL_STAT, + WOL_CTL_ENA_PME_ON_MAGIC_PKT | + WOL_CTL_ENA_MAGIC_PKT_UNIT); + } else + sky2_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT); + + return 0; +} +#endif + + +static struct ethtool_ops sky2_ethtool_ops = { + .get_settings = sky2_get_settings, + .set_settings = sky2_set_settings, + .get_drvinfo = sky2_get_drvinfo, + .get_msglevel = sky2_get_msglevel, + .set_msglevel = sky2_set_msglevel, + .get_link = ethtool_op_get_link, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_rx_csum = sky2_get_rx_csum, + .set_rx_csum = sky2_set_rx_csum, + .get_strings = sky2_get_strings, + .get_pauseparam = sky2_get_pauseparam, + .set_pauseparam = sky2_set_pauseparam, +#ifdef CONFIG_PM + .get_wol = sky2_get_wol, + .set_wol = sky2_set_wol, +#endif + .phys_id = sky2_phys_id, + .get_stats_count = sky2_get_stats_count, + .get_ethtool_stats = sky2_get_ethtool_stats, +}; + +/* Initialize network device */ +static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, + unsigned port, int highmem) +{ + struct sky2_port *sky2; + struct net_device *dev = alloc_etherdev(sizeof(*sky2)); + + if (!dev) { + printk(KERN_ERR "sky2 etherdev alloc failed"); + return NULL; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &hw->pdev->dev); + dev->open = sky2_up; + dev->stop = sky2_down; + dev->hard_start_xmit = sky2_xmit_frame; + dev->get_stats = sky2_get_stats; + dev->set_multicast_list = sky2_set_multicast; + dev->set_mac_address = sky2_set_mac_address; + dev->change_mtu = sky2_change_mtu; + SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops); + dev->tx_timeout = sky2_tx_timeout; + dev->watchdog_timeo = TX_WATCHDOG; + if (port == 0) + dev->poll = sky2_poll; + dev->weight = NAPI_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sky2_netpoll; +#endif + dev->irq = hw->pdev->irq; + + sky2 = netdev_priv(dev); + sky2->netdev = dev; + sky2->hw = hw; + sky2->msg_enable = netif_msg_init(debug, default_msg); + + spin_lock_init(&sky2->tx_lock); + /* Auto speed and flow control */ + sky2->autoneg = AUTONEG_ENABLE; + sky2->tx_pause = 0; + sky2->rx_pause = 1; + sky2->duplex = -1; + sky2->speed = -1; + sky2->advertising = sky2_supported_modes(hw); + sky2->rx_csum = 1; + sky2->rx_ring_size = is_ec_a1(hw) ? MIN_RX_BUFFERS : MAX_RX_BUFFERS; + tasklet_init(&sky2->phy_task, sky2_phy_task, (unsigned long) sky2); + + hw->dev[port] = dev; + + sky2->port = port; + + dev->features |= NETIF_F_LLTX; + if (highmem) + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO; + + /* read the mac address */ + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + + /* device is off until link detection */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + return dev; +} + +static inline void sky2_show_addr(struct net_device *dev) +{ + const struct sky2_port *sky2 = netdev_priv(dev); + + if (netif_msg_probe(sky2)) + printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +} + +static int __devinit sky2_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev, *dev1; + struct sky2_hw *hw; + int err, using_dac = 0; + + if ((err = pci_enable_device(pdev))) { + printk(KERN_ERR PFX "%s cannot enable PCI device\n", + pci_name(pdev)); + goto err_out; + } + + if ((err = pci_request_regions(pdev, DRV_NAME))) { + printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_out_disable_pdev; + } + + pci_set_master(pdev); + + if (sizeof(dma_addr_t) > sizeof(u32)) { + err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + if (!err) + using_dac = 1; + } + + if (!using_dac) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + printk(KERN_ERR PFX "%s no usable DMA configuration\n", + pci_name(pdev)); + goto err_out_free_regions; + } + } + +#ifdef __BIG_ENDIAN + /* byte swap decriptors in hardware */ + { + u32 reg; + + pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + reg |= PCI_REV_DESC; + pci_write_config_dword(pdev, PCI_DEV_REG2, reg); + } +#endif + + err = -ENOMEM; + hw = kmalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) { + printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n", + pci_name(pdev)); + goto err_out_free_regions; + } + + memset(hw, 0, sizeof(*hw)); + hw->pdev = pdev; + spin_lock_init(&hw->phy_lock); + + hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); + if (!hw->regs) { + printk(KERN_ERR PFX "%s: cannot map device registers\n", + pci_name(pdev)); + goto err_out_free_hw; + } + + err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_iounmap; + } + pci_set_drvdata(pdev, hw); + + err = sky2_reset(hw); + if (err) + goto err_out_free_irq; + + printk(KERN_INFO PFX "addr 0x%lx irq %d chip 0x%x (%s) rev %d\n", + pci_resource_start(pdev, 0), pdev->irq, + hw->chip_id, chip_name(hw->chip_id), hw->chip_rev); + + if ((dev = sky2_init_netdev(hw, 0, using_dac)) == NULL) + goto err_out_free_pci; + + if ((err = register_netdev(dev))) { + printk(KERN_ERR PFX "%s: cannot register net device\n", + pci_name(pdev)); + goto err_out_free_netdev; + } + + sky2_show_addr(dev); + + if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) { + if (register_netdev(dev1) == 0) + sky2_show_addr(dev1); + else { + /* Failure to register second port need not be fatal */ + printk(KERN_WARNING PFX "register of second port failed\n"); + hw->dev[1] = NULL; + free_netdev(dev1); + } + } + + return 0; + +err_out_free_netdev: + free_netdev(dev); + +err_out_free_irq: + free_irq(pdev->irq, hw); +err_out_free_pci: + pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); +err_out_iounmap: + iounmap(hw->regs); +err_out_free_hw: + kfree(hw); +err_out_free_regions: + pci_release_regions(pdev); +err_out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +err_out: + return err; +} + +static void __devexit sky2_remove(struct pci_dev *pdev) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + struct net_device *dev0, *dev1; + + if(!hw) + return; + + if ((dev1 = hw->dev[1])) + unregister_netdev(dev1); + dev0 = hw->dev[0]; + unregister_netdev(dev0); + + sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + + free_irq(pdev->irq, hw); + pci_free_consistent(pdev, STATUS_LE_BYTES, + hw->st_le, hw->st_dma); + pci_release_regions(pdev); + pci_disable_device(pdev); + if (dev1) + free_netdev(dev1); + free_netdev(dev0); + iounmap(hw->regs); + kfree(hw); + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + int i, wol = 0; + + for (i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + + if (dev) { + struct sky2_port *sky2 = netdev_priv(dev); + if (netif_running(dev)) { + netif_carrier_off(dev); + sky2_down(dev); + } + netif_device_detach(dev); + wol |= sky2->wol; + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int sky2_resume(struct pci_dev *pdev) +{ + struct sky2_hw *hw = pci_get_drvdata(pdev); + int i; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + sky2_reset(hw); + + for (i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + if (dev) { + netif_device_attach(dev); + if (netif_running(dev)) + sky2_up(dev); + } + } + return 0; +} +#endif + +static struct pci_driver sky2_driver = { + .name = DRV_NAME, + .id_table = sky2_id_table, + .probe = sky2_probe, + .remove = __devexit_p(sky2_remove), +#ifdef CONFIG_PM + .suspend = sky2_suspend, + .resume = sky2_resume, +#endif +}; + +static int __init sky2_init_module(void) +{ + + return pci_module_init(&sky2_driver); +} + +static void __exit sky2_cleanup_module(void) +{ + pci_unregister_driver(&sky2_driver); +} + +module_init(sky2_init_module); +module_exit(sky2_cleanup_module); + +MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); +MODULE_AUTHOR("Stephen Hemminger "); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h new file mode 100644 index 00000000000..d2a0ac2c53e --- /dev/null +++ b/drivers/net/sky2.h @@ -0,0 +1,1935 @@ +/* + * Definitions for the new Marvell Yukon 2 driver. + */ +#ifndef _SKY2_H +#define _SKY2_H + +/* PCI config registers */ +#define PCI_DEV_REG1 0x40 +#define PCI_DEV_REG2 0x44 +#define PCI_DEV_STATUS 0x7c +#define PCI_OS_PCI_X (1<<26) + +#define PEX_LNK_STAT 0xf2 +#define PEX_UNC_ERR_STAT 0x104 +#define PEX_DEV_CTRL 0xe8 + +/* Yukon-2 */ +enum pci_dev_reg_1 { + PCI_Y2_PIG_ENA = 1<<31, /* Enable Plug-in-Go (YUKON-2) */ + PCI_Y2_DLL_DIS = 1<<30, /* Disable PCI DLL (YUKON-2) */ + PCI_Y2_PHY2_COMA = 1<<29, /* Set PHY 2 to Coma Mode (YUKON-2) */ + PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */ + PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */ + PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */ +}; + +enum pci_dev_reg_2 { + PCI_VPD_WR_THR = 0xffL<<24, /* Bit 31..24: VPD Write Threshold */ + PCI_DEV_SEL = 0x7fL<<17, /* Bit 23..17: EEPROM Device Select */ + PCI_VPD_ROM_SZ = 7L<<14, /* Bit 16..14: VPD ROM Size */ + + PCI_PATCH_DIR = 0xfL<<8, /* Bit 11.. 8: Ext Patches dir 3..0 */ + PCI_EXT_PATCHS = 0xfL<<4, /* Bit 7.. 4: Extended Patches 3..0 */ + PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ + PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ + + PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ +}; + + +#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_PARITY) + +enum pex_dev_ctrl { + PEX_DC_MAX_RRS_MSK = 7<<12, /* Bit 14..12: Max. Read Request Size */ + PEX_DC_EN_NO_SNOOP = 1<<11,/* Enable No Snoop */ + PEX_DC_EN_AUX_POW = 1<<10,/* Enable AUX Power */ + PEX_DC_EN_PHANTOM = 1<<9, /* Enable Phantom Functions */ + PEX_DC_EN_EXT_TAG = 1<<8, /* Enable Extended Tag Field */ + PEX_DC_MAX_PLS_MSK = 7<<5, /* Bit 7.. 5: Max. Payload Size Mask */ + PEX_DC_EN_REL_ORD = 1<<4, /* Enable Relaxed Ordering */ + PEX_DC_EN_UNS_RQ_RP = 1<<3, /* Enable Unsupported Request Reporting */ + PEX_DC_EN_FAT_ER_RP = 1<<2, /* Enable Fatal Error Reporting */ + PEX_DC_EN_NFA_ER_RP = 1<<1, /* Enable Non-Fatal Error Reporting */ + PEX_DC_EN_COR_ER_RP = 1<<0, /* Enable Correctable Error Reporting */ +}; +#define PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK) + +/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ +enum pex_err { + PEX_UNSUP_REQ = 1<<20, /* Unsupported Request Error */ + + PEX_MALFOR_TLP = 1<<18, /* Malformed TLP */ + + PEX_UNEXP_COMP = 1<<16, /* Unexpected Completion */ + + PEX_COMP_TO = 1<<14, /* Completion Timeout */ + PEX_FLOW_CTRL_P = 1<<13, /* Flow Control Protocol Error */ + PEX_POIS_TLP = 1<<12, /* Poisoned TLP */ + + PEX_DATA_LINK_P = 1<<4, /* Data Link Protocol Error */ + PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P), +}; + + +enum csr_regs { + B0_RAP = 0x0000, + B0_CTST = 0x0004, + B0_Y2LED = 0x0005, + B0_POWER_CTRL = 0x0007, + B0_ISRC = 0x0008, + B0_IMSK = 0x000c, + B0_HWE_ISRC = 0x0010, + B0_HWE_IMSK = 0x0014, + B0_SP_ISRC = 0x0018, + B0_XM1_IMSK = 0x0020, + B0_XM1_ISRC = 0x0028, + B0_XM1_PHY_ADDR = 0x0030, + B0_XM1_PHY_DATA = 0x0034, + B0_XM2_IMSK = 0x0040, + B0_XM2_ISRC = 0x0048, + B0_XM2_PHY_ADDR = 0x0050, + B0_XM2_PHY_DATA = 0x0054, + B0_R1_CSR = 0x0060, + B0_R2_CSR = 0x0064, + B0_XS1_CSR = 0x0068, + B0_XA1_CSR = 0x006c, + B0_XS2_CSR = 0x0070, + B0_XA2_CSR = 0x0074, + + /* Special ISR registers (Yukon-2 only) */ + B0_Y2_SP_ISRC2 = 0x001c, + B0_Y2_SP_ISRC3 = 0x0020, + B0_Y2_SP_EISR = 0x0024, + B0_Y2_SP_LISR = 0x0028, + B0_Y2_SP_ICR = 0x002c, + + B2_MAC_1 = 0x0100, + B2_MAC_2 = 0x0108, + B2_MAC_3 = 0x0110, + B2_CONN_TYP = 0x0118, + B2_PMD_TYP = 0x0119, + B2_MAC_CFG = 0x011a, + B2_CHIP_ID = 0x011b, + B2_E_0 = 0x011c, + B2_E_1 = 0x011d, + B2_E_2 = 0x011e, + B2_Y2_CLK_GATE = 0x011d, + B2_Y2_HW_RES = 0x011e, + B2_E_3 = 0x011f, + B2_Y2_CLK_CTRL = 0x0120, + B2_LD_CTRL = 0x0128, + B2_LD_TEST = 0x0129, + B2_TI_INI = 0x0130, + B2_TI_VAL = 0x0134, + B2_TI_CTRL = 0x0138, + B2_TI_TEST = 0x0139, + B2_IRQM_INI = 0x0140, + B2_IRQM_VAL = 0x0144, + B2_IRQM_CTRL = 0x0148, + B2_IRQM_TEST = 0x0149, + B2_IRQM_MSK = 0x014c, + B2_IRQM_HWE_MSK = 0x0150, + B2_TST_CTRL1 = 0x0158, + B2_TST_CTRL2 = 0x0159, + B2_GP_IO = 0x015c, + B2_I2C_CTRL = 0x0160, + B2_I2C_DATA = 0x0164, + B2_I2C_IRQ = 0x0168, + B2_I2C_SW = 0x016c, + B2_BSC_INI = 0x0170, + B2_BSC_VAL = 0x0174, + B2_BSC_CTRL = 0x0178, + B2_BSC_STAT = 0x0179, + B2_BSC_TST = 0x017a, + + B3_RAM_ADDR = 0x0180, + B3_RAM_DATA_LO = 0x0184, + B3_RAM_DATA_HI = 0x0188, + +/* RAM Interface Registers */ +/* Yukon-2: use RAM_BUFFER() to access the RAM buffer */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define RAM_BUFFER(port, reg) (reg | (port <<6)) + + B3_RI_WTO_R1 = 0x0190, + B3_RI_WTO_XA1 = 0x0191, + B3_RI_WTO_XS1 = 0x0192, + B3_RI_RTO_R1 = 0x0193, + B3_RI_RTO_XA1 = 0x0194, + B3_RI_RTO_XS1 = 0x0195, + B3_RI_WTO_R2 = 0x0196, + B3_RI_WTO_XA2 = 0x0197, + B3_RI_WTO_XS2 = 0x0198, + B3_RI_RTO_R2 = 0x0199, + B3_RI_RTO_XA2 = 0x019a, + B3_RI_RTO_XS2 = 0x019b, + B3_RI_TO_VAL = 0x019c, + B3_RI_CTRL = 0x01a0, + B3_RI_TEST = 0x01a2, + B3_MA_TOINI_RX1 = 0x01b0, + B3_MA_TOINI_RX2 = 0x01b1, + B3_MA_TOINI_TX1 = 0x01b2, + B3_MA_TOINI_TX2 = 0x01b3, + B3_MA_TOVAL_RX1 = 0x01b4, + B3_MA_TOVAL_RX2 = 0x01b5, + B3_MA_TOVAL_TX1 = 0x01b6, + B3_MA_TOVAL_TX2 = 0x01b7, + B3_MA_TO_CTRL = 0x01b8, + B3_MA_TO_TEST = 0x01ba, + B3_MA_RCINI_RX1 = 0x01c0, + B3_MA_RCINI_RX2 = 0x01c1, + B3_MA_RCINI_TX1 = 0x01c2, + B3_MA_RCINI_TX2 = 0x01c3, + B3_MA_RCVAL_RX1 = 0x01c4, + B3_MA_RCVAL_RX2 = 0x01c5, + B3_MA_RCVAL_TX1 = 0x01c6, + B3_MA_RCVAL_TX2 = 0x01c7, + B3_MA_RC_CTRL = 0x01c8, + B3_MA_RC_TEST = 0x01ca, + B3_PA_TOINI_RX1 = 0x01d0, + B3_PA_TOINI_RX2 = 0x01d4, + B3_PA_TOINI_TX1 = 0x01d8, + B3_PA_TOINI_TX2 = 0x01dc, + B3_PA_TOVAL_RX1 = 0x01e0, + B3_PA_TOVAL_RX2 = 0x01e4, + B3_PA_TOVAL_TX1 = 0x01e8, + B3_PA_TOVAL_TX2 = 0x01ec, + B3_PA_CTRL = 0x01f0, + B3_PA_TEST = 0x01f2, + + Y2_CFG_SPC = 0x1c00, +}; + +/* Access pci config through board I/O */ +#define PCI_C(x) (Y2_CFG_SPC + (x)) + + +/* B0_CTST 16 bit Control/Status register */ +enum { + Y2_VMAIN_AVAIL = 1<<17, /* VMAIN available (YUKON-2 only) */ + Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */ + Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */ + Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */ + Y2_CLK_RUN_ENA = 1<<11,/* CLK_RUN Enable (YUKON-2 only) */ + Y2_CLK_RUN_DIS = 1<<10,/* CLK_RUN Disable (YUKON-2 only) */ + Y2_LED_STAT_ON = 1<<9, /* Status LED On (YUKON-2 only) */ + Y2_LED_STAT_OFF = 1<<8, /* Status LED Off (YUKON-2 only) */ + + CS_BUS_CLOCK = 1<<9, /* Bus Clock 0/1 = 33/66 MHz */ + CS_BUS_SLOT_SZ = 1<<8, /* Slot Size 0/1 = 32/64 bit slot */ + CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */ + CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */ + CS_STOP_DONE = 1<<5, /* Stop Master is finished */ + CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */ + CS_MRST_CLR = 1<<3, /* Clear Master reset */ + CS_MRST_SET = 1<<2, /* Set Master reset */ + CS_RST_CLR = 1<<1, /* Clear Software reset */ + CS_RST_SET = 1, /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ +/* Bit 7.. 2: reserved */ + LED_STAT_ON = 1<<1, /* Status LED on */ + LED_STAT_OFF = 1, /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ + PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */ + PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */ + PC_VCC_ENA = 1<<5, /* Switch VCC Enable */ + PC_VCC_DIS = 1<<4, /* Switch VCC Disable */ + PC_VAUX_ON = 1<<3, /* Switch VAUX On */ + PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */ + PC_VCC_ON = 1<<1, /* Switch VCC On */ + PC_VCC_OFF = 1<<0, /* Switch VCC Off */ +}; + +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ + +/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ +/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ +/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ +/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ +enum { + Y2_IS_HW_ERR = 1<<31, /* Interrupt HW Error */ + Y2_IS_STAT_BMU = 1<<30, /* Status BMU Interrupt */ + Y2_IS_ASF = 1<<29, /* ASF subsystem Interrupt */ + + Y2_IS_POLL_CHK = 1<<27, /* Check IRQ from polling unit */ + Y2_IS_TWSI_RDY = 1<<26, /* IRQ on end of TWSI Tx */ + Y2_IS_IRQ_SW = 1<<25, /* SW forced IRQ */ + Y2_IS_TIMINT = 1<<24, /* IRQ from Timer */ + + Y2_IS_IRQ_PHY2 = 1<<12, /* Interrupt from PHY 2 */ + Y2_IS_IRQ_MAC2 = 1<<11, /* Interrupt from MAC 2 */ + Y2_IS_CHK_RX2 = 1<<10, /* Descriptor error Rx 2 */ + Y2_IS_CHK_TXS2 = 1<<9, /* Descriptor error TXS 2 */ + Y2_IS_CHK_TXA2 = 1<<8, /* Descriptor error TXA 2 */ + + Y2_IS_IRQ_PHY1 = 1<<4, /* Interrupt from PHY 1 */ + Y2_IS_IRQ_MAC1 = 1<<3, /* Interrupt from MAC 1 */ + Y2_IS_CHK_RX1 = 1<<2, /* Descriptor error Rx 1 */ + Y2_IS_CHK_TXS1 = 1<<1, /* Descriptor error TXS 1 */ + Y2_IS_CHK_TXA1 = 1<<0, /* Descriptor error TXA 1 */ + + Y2_IS_BASE = Y2_IS_HW_ERR | Y2_IS_STAT_BMU | + Y2_IS_POLL_CHK | Y2_IS_TWSI_RDY | + Y2_IS_IRQ_SW | Y2_IS_TIMINT, + Y2_IS_PORT_1 = Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | + Y2_IS_CHK_RX1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXS1, + Y2_IS_PORT_2 = Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | + Y2_IS_CHK_RX2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_TXS2, +}; + +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +enum { + IS_ERR_MSK = 0x00003fff,/* All Error bits */ + + IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */ + IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */ + IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */ + IS_IRQ_STAT = 1<<10, /* IRQ status exception */ + IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */ + IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */ + IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */ + IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */ + IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */ + IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */ + IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */ + IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */ + IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */ + IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */ +}; + +/* Hardware error interrupt mask for Yukon 2 */ +enum { + Y2_IS_TIST_OV = 1<<29,/* Time Stamp Timer overflow interrupt */ + Y2_IS_SENSOR = 1<<28, /* Sensor interrupt */ + Y2_IS_MST_ERR = 1<<27, /* Master error interrupt */ + Y2_IS_IRQ_STAT = 1<<26, /* Status exception interrupt */ + Y2_IS_PCI_EXP = 1<<25, /* PCI-Express interrupt */ + Y2_IS_PCI_NEXP = 1<<24, /* PCI-Express error similar to PCI error */ + /* Link 2 */ + Y2_IS_PAR_RD2 = 1<<13, /* Read RAM parity error interrupt */ + Y2_IS_PAR_WR2 = 1<<12, /* Write RAM parity error interrupt */ + Y2_IS_PAR_MAC2 = 1<<11, /* MAC hardware fault interrupt */ + Y2_IS_PAR_RX2 = 1<<10, /* Parity Error Rx Queue 2 */ + Y2_IS_TCP_TXS2 = 1<<9, /* TCP length mismatch sync Tx queue IRQ */ + Y2_IS_TCP_TXA2 = 1<<8, /* TCP length mismatch async Tx queue IRQ */ + /* Link 1 */ + Y2_IS_PAR_RD1 = 1<<5, /* Read RAM parity error interrupt */ + Y2_IS_PAR_WR1 = 1<<4, /* Write RAM parity error interrupt */ + Y2_IS_PAR_MAC1 = 1<<3, /* MAC hardware fault interrupt */ + Y2_IS_PAR_RX1 = 1<<2, /* Parity Error Rx Queue 1 */ + Y2_IS_TCP_TXS1 = 1<<1, /* TCP length mismatch sync Tx queue IRQ */ + Y2_IS_TCP_TXA1 = 1<<0, /* TCP length mismatch async Tx queue IRQ */ + + Y2_HWE_L1_MASK = Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 | + Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1, + Y2_HWE_L2_MASK = Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | + Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2, + + Y2_HWE_ALL_MASK = Y2_IS_SENSOR | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | + Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | + Y2_HWE_L1_MASK | Y2_HWE_L2_MASK, +}; + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ +enum { + DPT_START = 1<<1, + DPT_STOP = 1<<0, +}; + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +enum { + TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */ + TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */ + TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */ + TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */ + TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */ + TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */ + TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */ + TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */ +}; + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +enum { + CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ + CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */ + CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/ +}; + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +enum { + CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */ + CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */ + CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ + CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ + CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ + CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ + CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ + + CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ + CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ + CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ +}; + +/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ +enum { + Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactiv (0 = activ) */ + Y2_CLK_GAT_LNK2_DIS = 1<<6, /* Disable clock gating Link 2 */ + Y2_COR_CLK_LNK2_DIS = 1<<5, /* Disable Core clock Link 2 */ + Y2_PCI_CLK_LNK2_DIS = 1<<4, /* Disable PCI clock Link 2 */ + Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactiv (0 = activ) */ + Y2_CLK_GAT_LNK1_DIS = 1<<2, /* Disable clock gating Link 1 */ + Y2_COR_CLK_LNK1_DIS = 1<<1, /* Disable Core clock Link 1 */ + Y2_PCI_CLK_LNK1_DIS = 1<<0, /* Disable PCI clock Link 1 */ +}; + +/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ +enum { + CFG_LED_MODE_MSK = 7<<2, /* Bit 4.. 2: LED Mode Mask */ + CFG_LINK_2_AVAIL = 1<<1, /* Link 2 available */ + CFG_LINK_1_AVAIL = 1<<0, /* Link 1 available */ +}; +#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) +#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) + + +/* B2_Y2_CLK_CTRL 32 bit Clock Frequency Control Register (Yukon-2/EC) */ +enum { + Y2_CLK_DIV_VAL_MSK = 0xff<<16,/* Bit 23..16: Clock Divisor Value */ +#define Y2_CLK_DIV_VAL(x) (((x)<<16) & Y2_CLK_DIV_VAL_MSK) + Y2_CLK_DIV_VAL2_MSK = 7<<21, /* Bit 23..21: Clock Divisor Value */ + Y2_CLK_SELECT2_MSK = 0x1f<<16,/* Bit 20..16: Clock Select */ +#define Y2_CLK_DIV_VAL_2(x) (((x)<<21) & Y2_CLK_DIV_VAL2_MSK) +#define Y2_CLK_SEL_VAL_2(x) (((x)<<16) & Y2_CLK_SELECT2_MSK) + Y2_CLK_DIV_ENA = 1<<1, /* Enable Core Clock Division */ + Y2_CLK_DIV_DIS = 1<<0, /* Disable Core Clock Division */ +}; + +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ +enum { + TIM_START = 1<<2, /* Start Timer */ + TIM_STOP = 1<<1, /* Stop Timer */ + TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */ +}; + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ +enum { + TIM_T_ON = 1<<2, /* Test mode on */ + TIM_T_OFF = 1<<1, /* Test mode off */ + TIM_T_STEP = 1<<0, /* Test step */ +}; + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ +/* RAM Interface Registers */ + +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ +enum { + RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */ + RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/ + + RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */ + RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ +}; + +#define SK_RI_TO_53 36 /* RAM interface timeout */ + + +/* Port related registers FIFO, and Arbiter */ +#define SK_REG(port,reg) (((port)<<7)+(reg)) + +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + +#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +enum { + TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */ + TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */ + TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */ + TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */ + TXA_START_RC = 1<<3, /* Start sync Rate Control */ + TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */ + TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */ + TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */ +}; + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use SK_REG() to access */ +enum { + TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/ + TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */ + TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */ + TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */ + TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */ + TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */ + TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */ +}; + + +enum { + B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */ + B7_CFG_SPC = 0x0380,/* copy of the Configuration register */ + B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */ + B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */ + B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */ + B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */ + B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */ + B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */ + B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */ +}; + +/* Queue Register Offsets, use Q_ADDR() to access */ +enum { + B8_Q_REGS = 0x0400, /* base of Queue registers */ + Q_D = 0x00, /* 8*32 bit Current Descriptor */ + Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */ + Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */ + Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */ + Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */ + Q_BC = 0x30, /* 32 bit Current Byte Counter */ + Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */ + Q_F = 0x38, /* 32 bit Flag Register */ + Q_T1 = 0x3c, /* 32 bit Test Register 1 */ + Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */ + Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */ + Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */ + Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */ + Q_T2 = 0x40, /* 32 bit Test Register 2 */ + Q_T3 = 0x44, /* 32 bit Test Register 3 */ + +/* Yukon-2 */ + Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ + Q_WM = 0x40, /* 16 bit FIFO Watermark */ + Q_AL = 0x42, /* 8 bit FIFO Alignment */ + Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ + Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ + Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ + Q_RL = 0x4a, /* 8 bit FIFO Read Level */ + Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ + Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ + Q_WL = 0x4e, /* 8 bit FIFO Write Level */ + Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ +}; +#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) + + +/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ +enum { + Y2_B8_PREF_REGS = 0x0450, + + PREF_UNIT_CTRL = 0x00, /* 32 bit Control register */ + PREF_UNIT_LAST_IDX = 0x04, /* 16 bit Last Index */ + PREF_UNIT_ADDR_LO = 0x08, /* 32 bit List start addr, low part */ + PREF_UNIT_ADDR_HI = 0x0c, /* 32 bit List start addr, high part*/ + PREF_UNIT_GET_IDX = 0x10, /* 16 bit Get Index */ + PREF_UNIT_PUT_IDX = 0x14, /* 16 bit Put Index */ + PREF_UNIT_FIFO_WP = 0x20, /* 8 bit FIFO write pointer */ + PREF_UNIT_FIFO_RP = 0x24, /* 8 bit FIFO read pointer */ + PREF_UNIT_FIFO_WM = 0x28, /* 8 bit FIFO watermark */ + PREF_UNIT_FIFO_LEV = 0x2c, /* 8 bit FIFO level */ + + PREF_UNIT_MASK_IDX = 0x0fff, +}; +#define Y2_QADDR(q,reg) (Y2_B8_PREF_REGS + (q) + (reg)) + +/* RAM Buffer Register Offsets */ +enum { + + RB_START = 0x00,/* 32 bit RAM Buffer Start Address */ + RB_END = 0x04,/* 32 bit RAM Buffer End Address */ + RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */ + RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */ + RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ + RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ + RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */ + RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ + RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */ + RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */ + RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */ + RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */ + RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */ +}; + +/* Receive and Transmit Queues */ +enum { + Q_R1 = 0x0000, /* Receive Queue 1 */ + Q_R2 = 0x0080, /* Receive Queue 2 */ + Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */ + Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */ + Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */ + Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */ +}; + +/* Different PHY Types */ +enum { + PHY_ADDR_MARV = 0, +}; + +#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) + + +enum { + LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */ + LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */ + LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */ + LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */ + + LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */ + +/* Receive GMAC FIFO (YUKON and Yukon-2) */ + + RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ + RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ + RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ + RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ + RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ + RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ + + RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ + RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ + + RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ + + RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ + + RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ +}; + + +/* Q_BC 32 bit Current Byte Counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + +/* Rx BMU Control / Status Registers (Yukon-2) */ +enum { + BMU_IDLE = 1<<31, /* BMU Idle State */ + BMU_RX_TCP_PKT = 1<<30, /* Rx TCP Packet (when RSS Hash enabled) */ + BMU_RX_IP_PKT = 1<<29, /* Rx IP Packet (when RSS Hash enabled) */ + + BMU_ENA_RX_RSS_HASH = 1<<15, /* Enable Rx RSS Hash */ + BMU_DIS_RX_RSS_HASH = 1<<14, /* Disable Rx RSS Hash */ + BMU_ENA_RX_CHKSUM = 1<<13, /* Enable Rx TCP/IP Checksum Check */ + BMU_DIS_RX_CHKSUM = 1<<12, /* Disable Rx TCP/IP Checksum Check */ + BMU_CLR_IRQ_PAR = 1<<11, /* Clear IRQ on Parity errors (Rx) */ + BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segmen. error (Tx) */ + BMU_CLR_IRQ_CHK = 1<<10, /* Clear IRQ Check */ + BMU_STOP = 1<<9, /* Stop Rx/Tx Queue */ + BMU_START = 1<<8, /* Start Rx/Tx Queue */ + BMU_FIFO_OP_ON = 1<<7, /* FIFO Operational On */ + BMU_FIFO_OP_OFF = 1<<6, /* FIFO Operational Off */ + BMU_FIFO_ENA = 1<<5, /* Enable FIFO */ + BMU_FIFO_RST = 1<<4, /* Reset FIFO */ + BMU_OP_ON = 1<<3, /* BMU Operational On */ + BMU_OP_OFF = 1<<2, /* BMU Operational Off */ + BMU_RST_CLR = 1<<1, /* Clear BMU Reset (Enable) */ + BMU_RST_SET = 1<<0, /* Set BMU Reset */ + + BMU_CLR_RESET = BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR, + BMU_OPER_INIT = BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | + BMU_FIFO_ENA | BMU_OP_ON, +}; + +/* Tx BMU Control / Status Registers (Yukon-2) */ + /* Bit 31: same as for Rx */ +enum { + BMU_TX_IPIDINCR_ON = 1<<13, /* Enable IP ID Increment */ + BMU_TX_IPIDINCR_OFF = 1<<12, /* Disable IP ID Increment */ + BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segm. length mism. */ +}; + +/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ +/* PREF_UNIT_CTRL 32 bit Prefetch Control register */ +enum { + PREF_UNIT_OP_ON = 1<<3, /* prefetch unit operational */ + PREF_UNIT_OP_OFF = 1<<2, /* prefetch unit not operational */ + PREF_UNIT_RST_CLR = 1<<1, /* Clear Prefetch Unit Reset */ + PREF_UNIT_RST_SET = 1<<0, /* Set Prefetch Unit Reset */ +}; + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ +enum { + RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */ + RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */ + RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */ + RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */ +}; + + +/* Transmit GMAC FIFO (YUKON only) */ +enum { + TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */ + TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ + TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */ + + TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */ + TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ + TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */ + + TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */ + TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */ + TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */ +}; + +/* Descriptor Poll Timer Registers */ +enum { + B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */ + B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */ + B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */ + + B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */ +}; + +/* Time Stamp Timer Registers (YUKON only) */ +enum { + GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */ + GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */ + GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ +}; + +/* Polling Unit Registers (Yukon-2 only) */ +enum { + POLL_CTRL = 0x0e20, /* 32 bit Polling Unit Control Reg */ + POLL_LAST_IDX = 0x0e24,/* 16 bit Polling Unit List Last Index */ + + POLL_LIST_ADDR_LO= 0x0e28,/* 32 bit Poll. List Start Addr (low) */ + POLL_LIST_ADDR_HI= 0x0e2c,/* 32 bit Poll. List Start Addr (high) */ +}; + +/* ASF Subsystem Registers (Yukon-2 only) */ +enum { + B28_Y2_SMB_CONFIG = 0x0e40,/* 32 bit ASF SMBus Config Register */ + B28_Y2_SMB_CSD_REG = 0x0e44,/* 32 bit ASF SMB Control/Status/Data */ + B28_Y2_ASF_IRQ_V_BASE=0x0e60,/* 32 bit ASF IRQ Vector Base */ + + B28_Y2_ASF_STAT_CMD= 0x0e68,/* 32 bit ASF Status and Command Reg */ + B28_Y2_ASF_HOST_COM= 0x0e6c,/* 32 bit ASF Host Communication Reg */ + B28_Y2_DATA_REG_1 = 0x0e70,/* 32 bit ASF/Host Data Register 1 */ + B28_Y2_DATA_REG_2 = 0x0e74,/* 32 bit ASF/Host Data Register 2 */ + B28_Y2_DATA_REG_3 = 0x0e78,/* 32 bit ASF/Host Data Register 3 */ + B28_Y2_DATA_REG_4 = 0x0e7c,/* 32 bit ASF/Host Data Register 4 */ +}; + +/* Status BMU Registers (Yukon-2 only)*/ +enum { + STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ + STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ + + STAT_LIST_ADDR_LO= 0x0e88,/* 32 bit Status List Start Addr (low) */ + STAT_LIST_ADDR_HI= 0x0e8c,/* 32 bit Status List Start Addr (high) */ + STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ + STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ + STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ + STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ + STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ + STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ + +/* FIFO Control/Status Registers (Yukon-2 only)*/ + STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ + STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ + STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ + STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ + STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ + STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ + STAT_FIFO_ISR_WM= 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ + +/* Level and ISR Timer Registers (Yukon-2 only)*/ + STAT_LEV_TIMER_INI= 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ + STAT_LEV_TIMER_CNT= 0x0eb4,/* 32 bit Level Timer Counter Reg */ + STAT_LEV_TIMER_CTRL= 0x0eb8,/* 8 bit Level Timer Control Reg */ + STAT_LEV_TIMER_TEST= 0x0eb9,/* 8 bit Level Timer Test Reg */ + STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ + STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ + STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ + STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ + STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ + STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ + STAT_ISR_TIMER_CTRL= 0x0ed8,/* 8 bit ISR Timer Control Reg */ + STAT_ISR_TIMER_TEST= 0x0ed9,/* 8 bit ISR Timer Test Reg */ + + ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ + ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ + ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ + ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ +}; + +enum { + LINKLED_OFF = 0x01, + LINKLED_ON = 0x02, + LINKLED_LINKSYNC_OFF = 0x04, + LINKLED_LINKSYNC_ON = 0x08, + LINKLED_BLINK_OFF = 0x10, + LINKLED_BLINK_ON = 0x20, +}; + +/* GMAC and GPHY Control Registers (YUKON only) */ +enum { + GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */ + GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */ + GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */ + GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */ + GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + + WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */ + + WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */ + WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ + WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ + WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ + WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ + WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ + WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ + +/* WOL Pattern Length Registers (YUKON only) */ + + WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */ + WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + + WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */ + WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */ +}; + +enum { + WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */ + WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */ +}; + +enum { + BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */ + BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */ +}; + +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +enum { + PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ + PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */ + PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */ + PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */ + PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */ + PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */ + PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */ + PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */ + PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */ + PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */ + PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */ + PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */ + PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */ + PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */ + PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ + PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */ + PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */ + PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */ + PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */ + PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ +}; + +enum { + PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ + PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ + PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */ + PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */ + PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */ + PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */ + PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */ + PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */ + PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */ + PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */ +}; + +enum { + PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */ + PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */ + PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */ +}; + +enum { + PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */ + + PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ + PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ + PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ + PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ + PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */ +}; + +enum { + PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */ + PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */ + PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */ +}; + +/* different Marvell PHY Ids */ +enum { + PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */ + + PHY_BCOM_ID1_A1 = 0x6041, + PHY_BCOM_ID1_B2 = 0x6043, + PHY_BCOM_ID1_C0 = 0x6044, + PHY_BCOM_ID1_C5 = 0x6047, + + PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ + PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */ + PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ + PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ +}; + +/* Advertisement register bits */ +enum { + PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_AN_RF = 1<<13, /* Bit 13: Remote Fault Bits */ + + PHY_AN_PAUSE_ASYM = 1<<11,/* Bit 11: Try for asymmetric */ + PHY_AN_PAUSE_CAP = 1<<10, /* Bit 10: Try for pause */ + PHY_AN_100BASE4 = 1<<9, /* Bit 9: Try for 100mbps 4k packets */ + PHY_AN_100FULL = 1<<8, /* Bit 8: Try for 100mbps full-duplex */ + PHY_AN_100HALF = 1<<7, /* Bit 7: Try for 100mbps half-duplex */ + PHY_AN_10FULL = 1<<6, /* Bit 6: Try for 10mbps full-duplex */ + PHY_AN_10HALF = 1<<5, /* Bit 5: Try for 10mbps half-duplex */ + PHY_AN_CSMA = 1<<0, /* Bit 0: Only selector supported */ + PHY_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ + PHY_AN_FULL = PHY_AN_100FULL | PHY_AN_10FULL | PHY_AN_CSMA, + PHY_AN_ALL = PHY_AN_10HALF | PHY_AN_10FULL | + PHY_AN_100HALF | PHY_AN_100FULL, +}; + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ + PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/** Marvell-Specific */ +enum { + PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ + PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */ + PHY_M_AN_RF = 1<<13, /* Remote Fault */ + + PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */ + PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */ + PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */ + PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */ + PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */ + PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */ + PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */ + PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */ +}; + +/* special defines for FIBER (88E1011S only) */ +enum { + PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ + PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ + PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */ + PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */ +}; + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +enum { + PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */ + PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */ + PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */ + PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */ +}; + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */ + PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */ + PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */ + PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */ + PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */ +}; + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +enum { + PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */ + PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */ + PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */ + PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */ + PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */ + PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */ + PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */ + PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */ + PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */ + PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */ + PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */ + PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */ +}; + +enum { + PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */ + PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ +}; + +#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) + +enum { + PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ + PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */ + PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */ + PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */ + PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */ + PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */ + PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */ + + PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */ + PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */ + + PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */ + PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */ +}; + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +enum { + PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */ + PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */ + PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */ + PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */ + PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */ + PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */ + PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */ + PHY_M_PS_LINK_UP = 1<<10, /* Link Up */ + PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */ + PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */ + PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */ + PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */ + PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */ + PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */ + PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */ + PHY_M_PS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */ + PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ +}; + +enum { + PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */ + PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */ + PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */ + PHY_M_IS_AN_PR = 1<<12, /* Page Received */ + PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */ + PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */ + PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */ + PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */ + PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */ + PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */ + PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */ + PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */ + + PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */ + PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */ + PHY_M_IS_JABBER = 1<<0, /* Jabber */ + + PHY_M_DEF_MSK = PHY_M_IS_LSP_CHANGE | PHY_M_IS_LST_CHANGE + | PHY_M_IS_FIFO_ERROR, + PHY_M_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL, +}; + + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +enum { + PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */ + PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */ + + PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */ + PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */ + /* (88E1111 only) */ + PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ + /* !!! Errata in spec. (1 = disable) */ + PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ + PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */ + PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ + PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ + PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ + PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; + +#define PHY_M_EC_M_DSC(x) ((x)<<10 & PHY_M_EC_M_DSC_MSK) + /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) ((x)<<8 & PHY_M_EC_S_DSC_MSK) + /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_DSC_2(x) ((x)<<9 & PHY_M_EC_M_DSC_MSK2) + /* 000=1x; 001=2x; 010=3x; 011=4x */ +#define PHY_M_EC_MAC_S(x) ((x)<<4 & PHY_M_EC_MAC_S_MSK) + /* 01X=0; 110=2.5; 111=25 (MHz) */ + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +enum { + PHY_M_PC_DIS_LINK_Pa = 1<<15,/* Disable Link Pulses */ + PHY_M_PC_DSC_MSK = 7<<12,/* Bit 14..12: Downshift Counter */ + PHY_M_PC_DOWN_S_ENA = 1<<11,/* Downshift Enable */ +}; +/* !!! Errata in spec. (1 = disable) */ + +#define PHY_M_PC_DSC(x) (((x)<<12) & PHY_M_PC_DSC_MSK) + /* 100=5x; 101=6x; 110=7x; 111=8x */ +enum { + MAC_TX_CLK_0_MHZ = 2, + MAC_TX_CLK_2_5_MHZ = 6, + MAC_TX_CLK_25_MHZ = 7, +}; + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +enum { + PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */ + PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */ + PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */ + PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */ + PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */ + PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */ + PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */ + /* (88E1111 only) */ +}; + +enum { + PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */ + /* (88E1011 only) */ + PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */ + PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */ + PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */ + PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */ + PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ +}; + +#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) + +/***** PHY_MARV_PHY_STAT (page 3)16 bit r/w Polarity Control Reg. *****/ +enum { + PHY_M_POLC_LS1M_MSK = 0xf<<12, /* Bit 15..12: LOS,STAT1 Mix % Mask */ + PHY_M_POLC_IS0M_MSK = 0xf<<8, /* Bit 11.. 8: INIT,STAT0 Mix % Mask */ + PHY_M_POLC_LOS_MSK = 0x3<<6, /* Bit 7.. 6: LOS Pol. Ctrl. Mask */ + PHY_M_POLC_INIT_MSK = 0x3<<4, /* Bit 5.. 4: INIT Pol. Ctrl. Mask */ + PHY_M_POLC_STA1_MSK = 0x3<<2, /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */ + PHY_M_POLC_STA0_MSK = 0x3, /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */ +}; + +#define PHY_M_POLC_LS1_P_MIX(x) (((x)<<12) & PHY_M_POLC_LS1M_MSK) +#define PHY_M_POLC_IS0_P_MIX(x) (((x)<<8) & PHY_M_POLC_IS0M_MSK) +#define PHY_M_POLC_LOS_CTRL(x) (((x)<<6) & PHY_M_POLC_LOS_MSK) +#define PHY_M_POLC_INIT_CTRL(x) (((x)<<4) & PHY_M_POLC_INIT_MSK) +#define PHY_M_POLC_STA1_CTRL(x) (((x)<<2) & PHY_M_POLC_STA1_MSK) +#define PHY_M_POLC_STA0_CTRL(x) (((x)<<0) & PHY_M_POLC_STA0_MSK) + +enum { + PULS_NO_STR = 0,/* no pulse stretching */ + PULS_21MS = 1,/* 21 ms to 42 ms */ + PULS_42MS = 2,/* 42 ms to 84 ms */ + PULS_84MS = 3,/* 84 ms to 170 ms */ + PULS_170MS = 4,/* 170 ms to 340 ms */ + PULS_340MS = 5,/* 340 ms to 670 ms */ + PULS_670MS = 6,/* 670 ms to 1.3 s */ + PULS_1300MS = 7,/* 1.3 s to 2.7 s */ +}; + +#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) + +enum { + BLINK_42MS = 0,/* 42 ms */ + BLINK_84MS = 1,/* 84 ms */ + BLINK_170MS = 2,/* 170 ms */ + BLINK_340MS = 3,/* 340 ms */ + BLINK_670MS = 4,/* 670 ms */ +}; + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + /* Bit 13..12: reserved */ +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, +}; + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ +enum { + PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */ + PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */ + PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */ + PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */ + PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */ +}; + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +enum { + PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */ + PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */ + PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */ + PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */ + PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */ + PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */ + PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */ + /* (88E1111 only) */ + + PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */ + PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */ + PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ + /* Bit 15..12: reserved (used internally) */ +enum { + PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */ + PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */ + PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ +}; + +#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK) + +enum { + LED_PAR_CTRL_COLX = 0x00, + LED_PAR_CTRL_ERROR = 0x01, + LED_PAR_CTRL_DUPLEX = 0x02, + LED_PAR_CTRL_DP_COL = 0x03, + LED_PAR_CTRL_SPEED = 0x04, + LED_PAR_CTRL_LINK = 0x05, + LED_PAR_CTRL_TX = 0x06, + LED_PAR_CTRL_RX = 0x07, + LED_PAR_CTRL_ACT = 0x08, + LED_PAR_CTRL_LNK_RX = 0x09, + LED_PAR_CTRL_LNK_AC = 0x0a, + LED_PAR_CTRL_ACT_BL = 0x0b, + LED_PAR_CTRL_TX_BL = 0x0c, + LED_PAR_CTRL_RX_BL = 0x0d, + LED_PAR_CTRL_COL_BL = 0x0e, + LED_PAR_CTRL_INACT = 0x0f +}; + +/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ +enum { + PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */ + PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */ + PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ +}; + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ +enum { + PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ + PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ + PHY_M_MAC_MD_COPPER = 5,/* Copper only */ + PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ +}; +#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) + +/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ +enum { + PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */ + PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */ + PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */ + PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ +}; + +#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK) + +/* GMAC registers */ +/* Port Registers */ +enum { + GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */ + GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */ + GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */ + GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */ + GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */ + GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */ + GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */ +/* Source Address Registers */ + GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */ + GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */ + GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */ + GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */ + GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */ + GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ + GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */ + GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */ + GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */ + GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ + GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */ + GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */ + GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ + GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */ + GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */ + GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ + GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */ + GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */ + GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */ +}; + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +enum { + GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */ + GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */ + GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */ + GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */ + GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ + GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */ + GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */ + GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */ + GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */ + GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */ + GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */ + GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */ + GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */ + GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */ + GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */ + GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */ + GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */ + GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */ + GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */ + GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ + GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ + GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */ + GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */ + GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */ + GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */ + GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */ + GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */ + GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */ + GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */ + GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */ + GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */ + GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */ + GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */ + GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */ + + GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */ + GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */ + GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */ + GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */ + GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */ + GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */ +}; + +/* GMAC Bit Definitions */ +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +enum { + GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */ + GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */ + GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */ + GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ + GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ + GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + + GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ + GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ + GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */ + GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */ + GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */ +}; + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ +enum { + GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */ + GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */ + GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */ + GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */ + GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */ + GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */ + GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */ + GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */ + GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */ + GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */ + GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */ + GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */ + GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */ + GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */ + GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */ +}; + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +enum { + GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ + GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ + GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ + GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ +}; + +#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +enum { + GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */ + GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */ + GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */ + GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */ +}; + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +enum { + GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */ + GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */ + GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */ + GM_TXPA_BO_LIM_MSK = 0x0f, /* Bit 3.. 0: Backoff Limit Mask */ + + TX_JAM_LEN_DEF = 0x03, + TX_JAM_IPG_DEF = 0x0b, + TX_IPG_JAM_DEF = 0x1c, + TX_BOF_LIM_DEF = 0x04, +}; + +#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK) +#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK) + + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +enum { + GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */ + GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */ + GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */ + GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */ + GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ +}; + +#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +enum { + GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */ + GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */ + GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/ + GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ + GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ +}; + +#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ +enum { + GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */ + GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */ +}; + +/* Receive Frame Status Encoding */ +enum { + GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */ + GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */ + GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */ + GMR_FS_MC = 1<<10, /* Bit 10: Multicast Packet */ + GMR_FS_BC = 1<<9, /* Bit 9: Broadcast Packet */ + GMR_FS_RX_OK = 1<<8, /* Bit 8: Receive OK (Good Packet) */ + GMR_FS_GOOD_FC = 1<<7, /* Bit 7: Good Flow-Control Packet */ + GMR_FS_BAD_FC = 1<<6, /* Bit 6: Bad Flow-Control Packet */ + GMR_FS_MII_ERR = 1<<5, /* Bit 5: MII Error */ + GMR_FS_LONG_ERR = 1<<4, /* Bit 4: Too Long Packet */ + GMR_FS_FRAGMENT = 1<<3, /* Bit 3: Fragment */ + + GMR_FS_CRC_ERR = 1<<1, /* Bit 1: CRC Error */ + GMR_FS_RX_FF_OV = 1<<0, /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ + GMR_FS_ANY_ERR = GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR | + GMR_FS_FRAGMENT | GMR_FS_LONG_ERR | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_UN_SIZE | GMR_FS_JABBER, +/* Rx GMAC FIFO Flush Mask (default) */ + RX_FF_FL_DEF_MSK = GMR_FS_ANY_ERR, +}; + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ +enum { + GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */ + GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */ + GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */ + + GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */ + GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */ + GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */ + GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */ + GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */ + GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */ + GMF_CLI_RX_FC = 1<<4, /* Clear IRQ Rx Frame Complete */ + GMF_OPER_ON = 1<<3, /* Operational Mode On */ + GMF_OPER_OFF = 1<<2, /* Operational Mode Off */ + GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */ + GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */ + + RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */ +}; + + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ +enum { + GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ + GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ + GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ + + GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */ + GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */ + GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */ +}; + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ +enum { + GMT_ST_START = 1<<2, /* Start Time Stamp Timer */ + GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */ + GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */ +}; + +/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ +enum { + Y2_ASF_OS_PRES = 1<<4, /* ASF operation system present */ + Y2_ASF_RESET = 1<<3, /* ASF system in reset state */ + Y2_ASF_RUNNING = 1<<2, /* ASF system operational */ + Y2_ASF_CLR_HSTI = 1<<1, /* Clear ASF IRQ */ + Y2_ASF_IRQ = 1<<0, /* Issue an IRQ to ASF system */ + + Y2_ASF_UC_STATE = 3<<2, /* ASF uC State */ + Y2_ASF_CLK_HALT = 0, /* ASF system clock stopped */ +}; + +/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ +enum { + Y2_ASF_CLR_ASFI = 1<<1, /* Clear host IRQ */ + Y2_ASF_HOST_IRQ = 1<<0, /* Issue an IRQ to HOST system */ +}; + +/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ +enum { + SC_STAT_CLR_IRQ = 1<<4, /* Status Burst IRQ clear */ + SC_STAT_OP_ON = 1<<3, /* Operational Mode On */ + SC_STAT_OP_OFF = 1<<2, /* Operational Mode Off */ + SC_STAT_RST_CLR = 1<<1, /* Clear Status Unit Reset (Enable) */ + SC_STAT_RST_SET = 1<<0, /* Set Status Unit Reset */ +}; + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ +enum { + GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */ + GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */ + GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */ + GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */ + GMC_PAUSE_ON = 1<<3, /* Pause On */ + GMC_PAUSE_OFF = 1<<2, /* Pause Off */ + GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */ + GMC_RST_SET = 1<<0, /* Set GMAC Reset */ +}; + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ +enum { + GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ + GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ + GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ + GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ + GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ + GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ + GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ + GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ + GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ + GPC_ANEG_0 = 1<<19, /* ANEG[0] */ + GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ + GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ + GPC_ANEG_3 = 1<<16, /* ANEG[3] */ + GPC_ANEG_2 = 1<<15, /* ANEG[2] */ + GPC_ANEG_1 = 1<<14, /* ANEG[1] */ + GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ + GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ + GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ + GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ + GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ + GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ + GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ + GPC_RST_SET = 1<<0, /* Set GPHY Reset */ +}; + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +enum { + GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */ + GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */ + GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */ + GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */ + GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ + GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV |\ + GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ + GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */ + GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ + WOL_CTL_LINK_CHG_OCC = 1<<15, + WOL_CTL_MAGIC_PKT_OCC = 1<<14, + WOL_CTL_PATTERN_OCC = 1<<13, + WOL_CTL_CLEAR_RESULT = 1<<12, + WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11, + WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10, + WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9, + WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8, + WOL_CTL_ENA_PME_ON_PATTERN = 1<<7, + WOL_CTL_DIS_PME_ON_PATTERN = 1<<6, + WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5, + WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4, + WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3, + WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2, + WOL_CTL_ENA_PATTERN_UNIT = 1<<1, + WOL_CTL_DIS_PATTERN_UNIT = 1<<0, +}; + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (1 << (x)) + + +/* Control flags */ +enum { + UDPTCP = 1<<0, + CALSUM = 1<<1, + WR_SUM = 1<<2, + INIT_SUM= 1<<3, + LOCK_SUM= 1<<4, + INS_VLAN= 1<<5, + FRC_STAT= 1<<6, + EOP = 1<<7, +}; + +enum { + HW_OWNER = 1<<7, + OP_TCPWRITE = 0x11, + OP_TCPSTART = 0x12, + OP_TCPINIT = 0x14, + OP_TCPLCK = 0x18, + OP_TCPCHKSUM = OP_TCPSTART, + OP_TCPIS = OP_TCPINIT | OP_TCPSTART, + OP_TCPLW = OP_TCPLCK | OP_TCPWRITE, + OP_TCPLSW = OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE, + OP_TCPLISW = OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE, + + OP_ADDR64 = 0x21, + OP_VLAN = 0x22, + OP_ADDR64VLAN = OP_ADDR64 | OP_VLAN, + OP_LRGLEN = 0x24, + OP_LRGLENVLAN = OP_LRGLEN | OP_VLAN, + OP_BUFFER = 0x40, + OP_PACKET = 0x41, + OP_LARGESEND = 0x43, + +/* YUKON-2 STATUS opcodes defines */ + OP_RXSTAT = 0x60, + OP_RXTIMESTAMP = 0x61, + OP_RXVLAN = 0x62, + OP_RXCHKS = 0x64, + OP_RXCHKSVLAN = OP_RXCHKS | OP_RXVLAN, + OP_RXTIMEVLAN = OP_RXTIMESTAMP | OP_RXVLAN, + OP_RSS_HASH = 0x65, + OP_TXINDEXLE = 0x68, + +/* YUKON-2 SPECIAL opcodes defines */ + OP_PUTIDX = 0x70, +}; + +/* Yukon 2 hardware interface + * Not tested on big endian + */ +struct sky2_tx_le { + union { + u32 addr; + struct { + u16 offset; + u16 start; + } csum; + struct { + u16 size; + u16 rsvd; + } tso; + } tx; + u16 length; /* also vlan tag or checksum start */ + u8 ctrl; + u8 opcode; +}; + +struct sky2_rx_le { + union { + u32 addr; + struct { + u16 start1; + u16 start2; + } csum; + } rx; + u16 length; + u8 ctrl; + u8 opcode; +}; + +struct sky2_status_le { + u32 status; /* also checksum */ + u16 length; /* also vlan tag */ + u8 link; + u8 opcode; +}; + + +struct ring_info { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +struct sky2_port { + struct sky2_hw *hw ____cacheline_aligned; + struct net_device *netdev; + unsigned port; + u32 msg_enable; + + struct ring_info *tx_ring ____cacheline_aligned; + struct sky2_tx_le *tx_le; + spinlock_t tx_lock; + u16 tx_cons; /* next le to check */ + u16 tx_prod; /* next le to use */ + u16 tx_last_put; + + struct ring_info *rx_ring ____cacheline_aligned; + struct sky2_rx_le *rx_le; + u16 rx_ring_size; + u16 rx_next; /* next re to check */ + u16 rx_put; /* next le index to use */ + u16 rx_last_put; + + dma_addr_t rx_le_map; + dma_addr_t tx_le_map; + u32 advertising; /* ADVERTISED_ bits */ + u16 speed; /* SPEED_1000, SPEED_100, ... */ + u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */ + u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */ + u8 rx_pause; + u8 tx_pause; + u8 rx_csum; + u8 wol; + + struct tasklet_struct phy_task; + struct net_device_stats net_stats; +}; + +struct sky2_hw { + void __iomem *regs; + struct pci_dev *pdev; + u32 intr_mask; + struct net_device *dev[2]; + + u8 chip_id; + u8 chip_rev; + u8 copper; + u8 ports; + + struct sky2_status_le *st_le; + u32 st_idx; + dma_addr_t st_dma; + + spinlock_t phy_lock; +}; + +/* Register accessor for memory mapped device */ +static inline u32 sky2_read32(const struct sky2_hw *hw, unsigned reg) +{ + return readl(hw->regs + reg); +} + +static inline u16 sky2_read16(const struct sky2_hw *hw, unsigned reg) +{ + return readw(hw->regs + reg); +} + +static inline u8 sky2_read8(const struct sky2_hw *hw, unsigned reg) +{ + return readb(hw->regs + reg); +} + +static inline int is_pciex(const struct sky2_hw *hw) +{ + return (sky2_read32(hw, PCI_C(PCI_DEV_STATUS)) & PCI_OS_PCI_X) == 0; +} + + +static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val) +{ + writel(val, hw->regs + reg); +} + +static inline void sky2_write16(const struct sky2_hw *hw, unsigned reg, u16 val) +{ + writew(val, hw->regs + reg); +} + +static inline void sky2_write8(const struct sky2_hw *hw, unsigned reg, u8 val) +{ + writeb(val, hw->regs + reg); +} + +/* Yukon PHY related registers */ +#define SK_GMAC_REG(port,reg) \ + (BASE_GMAC_1 + (port) * (BASE_GMAC_2-BASE_GMAC_1) + (reg)) +#define GM_PHY_RETRIES 100 + +static inline u16 gma_read16(const struct sky2_hw *hw, unsigned port, unsigned reg) +{ + return sky2_read16(hw, SK_GMAC_REG(port,reg)); +} + +static inline u32 gma_read32(struct sky2_hw *hw, unsigned port, unsigned reg) +{ + unsigned base = SK_GMAC_REG(port, reg); + return (u32) sky2_read16(hw, base) + | (u32) sky2_read16(hw, base+4) << 16; +} + +static inline void gma_write16(const struct sky2_hw *hw, unsigned port, int r, u16 v) +{ + sky2_write16(hw, SK_GMAC_REG(port,r), v); +} + +static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg, + const u8 *addr) +{ + gma_write16(hw, port, reg, (u16) addr[0] | ((u16) addr[1] << 8)); + gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8)); + gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8)); +} +#endif -- cgit v1.2.3-70-g09d2 From 793b883ed12a6ae6e2901ddb5e038b77d6f0c0ac Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Sep 2005 16:06:14 -0700 Subject: [PATCH] sky2: driver update. Here is revised patch against netdev sky2 branch. It includes whitespace fixes, all the changes from the previous review as well as some optimizations and timing fixes to solve some of the hangs. The stall problem is better but not perfect. It appears that under stress the chip can't keep up with the bus and sends a pause frame, then hangs. This version is for testing, and hopefully other eyes might see the root cause of the problem. I don't want to reinvent the ugly watchdog code in the syskonnect version of sk98lin. If you read it you will see, the original driver writer and the hardware developer obviously didn't understand each other. Dual port support is included, but not tested yet. It did require small change to NAPI since both ports share same IRQ. Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 1311 ++++++++++++++++++++++++++------------------- drivers/net/sky2.h | 112 ++-- include/linux/netdevice.h | 8 +- 3 files changed, 809 insertions(+), 622 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index cfb2b41bc6b..bc95aacab20 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -15,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -26,14 +26,17 @@ /* * TODO * - coalescing setting? - * - variable ring size? + * - vlan support * * TOTEST + * - variable ring size * - speed setting * - power management + * - netpoll */ #include +#include #include #include #include @@ -45,14 +48,13 @@ #include #include #include -#include #include #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.4" #define PFX DRV_NAME " " /* @@ -70,13 +72,18 @@ #define is_ec_a1(hw) 0 #endif -#define RX_LE_SIZE 256 -#define MIN_RX_BUFFERS 8 -#define MAX_RX_BUFFERS 124 +#define RX_LE_SIZE 256 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) +#define RX_MAX_PENDING (RX_LE_SIZE/2 - 1) +#define RX_DEF_PENDING 128 +#define RX_COPY_THRESHOLD 128 + +#define TX_RING_SIZE 512 +#define TX_DEF_PENDING (TX_RING_SIZE - 1) +#define TX_MIN_PENDING 64 +#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS) -#define TX_RING_SIZE 256 // min 64 max 4096 -#define STATUS_RING_SIZE 1024 // pow2 > (2*Rx + Tx) +#define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) #define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) @@ -84,15 +91,16 @@ #define PHY_RETRIES 1000 static const u32 default_msg = - NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK - | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR - | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN; + NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK + | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR + | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_INTR; -static int debug = -1; /* defaults above */ +static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static const struct pci_device_id sky2_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, @@ -111,34 +119,24 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, { 0 } }; + MODULE_DEVICE_TABLE(pci, sky2_id_table); /* Avoid conditionals by using array */ static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; -static inline const char *chip_name(u8 chip_id) -{ - switch (chip_id) { - case CHIP_ID_GENESIS: - return "Genesis"; - case CHIP_ID_YUKON: - return "Yukon"; - case CHIP_ID_YUKON_LITE: - return "Yukon-Lite"; - case CHIP_ID_YUKON_LP: - return "Yukon-LP"; - case CHIP_ID_YUKON_XL: - return "Yukon-XL"; - case CHIP_ID_YUKON_EC: - return "Yukon-EC"; - case CHIP_ID_YUKON_FE: - return "Yukon-FE"; - default: - return "???"; - } -} +static const char *yukon_name[] = { + [CHIP_ID_YUKON_LITE - CHIP_ID_YUKON] = "Lite", /* 0xb0 */ + [CHIP_ID_YUKON_LP - CHIP_ID_YUKON] = "LP", /* 0xb2 */ + [CHIP_ID_YUKON_XL - CHIP_ID_YUKON] = "XL", /* 0xb3 */ + [CHIP_ID_YUKON_EC - CHIP_ID_YUKON] = "EC", /* 0xb6 */ + [CHIP_ID_YUKON_FE - CHIP_ID_YUKON] = "FE", /* 0xb7 */ +}; + + +/* Access to external PHY */ static void gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { int i; @@ -148,30 +146,28 @@ static void gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg)); for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); - if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) - break; + return; + udelay(1); } + printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name); } static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) { int i; - gma_write16(hw, port, GM_SMI_CTRL, - GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) goto ready; + udelay(1); } - printk(KERN_WARNING PFX "%s: phy read timeout\n", - hw->dev[port]->name); - ready: + printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name); +ready: return gma_read16(hw, port, GM_SMI_DATA); } @@ -183,6 +179,7 @@ static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); /* disable PHY IRQs */ gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ gma_write16(hw, port, GM_MC_ADDR_H2, 0); gma_write16(hw, port, GM_MC_ADDR_H3, 0); @@ -196,21 +193,13 @@ static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) static void sky2_phy_init(struct sky2_hw *hw, unsigned port) { struct sky2_port *sky2 = netdev_priv(hw->dev[port]); - u16 ctrl, ct1000, adv; - u16 ledctrl, ledover; - - pr_debug("phy reset autoneg=%s advertising=0x%x pause rx=%s tx=%s\n", - sky2->autoneg == AUTONEG_ENABLE ? "enable" : "disable", - sky2->advertising, - sky2->rx_pause ? "on" : "off", - sky2->tx_pause ? "on" : "off"); + u16 ctrl, ct1000, adv, pg, ledctrl, ledover; - if (sky2->autoneg == AUTONEG_ENABLE && - hw->chip_id != CHIP_ID_YUKON_XL) { + if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) { u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | - PHY_M_EC_MAC_S_MSK); + PHY_M_EC_MAC_S_MSK); ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); if (hw->chip_id == CHIP_ID_YUKON_EC) @@ -258,9 +247,6 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* select page 1 to access Fiber registers */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1); } - - ctrl &= ~(PHY_M_PC_MDIX_MSK | PHY_M_MAC_MD_MSK); - ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX); } ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); @@ -290,14 +276,14 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) adv |= PHY_M_AN_10_FD; if (sky2->advertising & ADVERTISED_10baseT_Half) adv |= PHY_M_AN_10_HD; - } else /* special defines for FIBER (88E1011S only) */ + } else /* special defines for FIBER (88E1011S only) */ adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; /* Set Flow-control capabilities */ if (sky2->tx_pause && sky2->rx_pause) - adv |= PHY_AN_PAUSE_CAP; /* symmetric */ + adv |= PHY_AN_PAUSE_CAP; /* symmetric */ else if (sky2->rx_pause && !sky2->tx_pause) - adv |= PHY_AN_PAUSE_ASYM|PHY_AN_PAUSE_CAP; + adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP; else if (!sky2->rx_pause && sky2->tx_pause) adv |= PHY_AN_PAUSE_ASYM; /* local */ @@ -347,26 +333,28 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) break; case CHIP_ID_YUKON_XL: - ctrl = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); /* select page 3 to access LED control register */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); /* set LED Function Control register */ - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, - (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ - PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ - PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ - PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ + PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */ + PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */ + PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */ /* set Polarity Control register */ gm_phy_write(hw, port, PHY_MARV_PHY_STAT, - (PHY_M_POLC_LS1_P_MIX(4) | PHY_M_POLC_IS0_P_MIX(4) | - PHY_M_POLC_LOS_CTRL(2) | PHY_M_POLC_INIT_CTRL(2) | - PHY_M_POLC_STA1_CTRL(2) | PHY_M_POLC_STA0_CTRL(2))); + (PHY_M_POLC_LS1_P_MIX(4) | + PHY_M_POLC_IS0_P_MIX(4) | + PHY_M_POLC_LOS_CTRL(2) | + PHY_M_POLC_INIT_CTRL(2) | + PHY_M_POLC_STA1_CTRL(2) | + PHY_M_POLC_STA0_CTRL(2))); /* restore page register */ - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, ctrl); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); break; default: @@ -405,8 +393,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 - && port == 1) { + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 && port == 1) { /* WA DEV_472 -- looks like crossed wires on port 2 */ /* clear GMAC 1 Control reset */ sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR); @@ -418,14 +405,12 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0); } - if (sky2->autoneg == AUTONEG_DISABLE) { reg = gma_read16(hw, port, GM_GP_CTRL); reg |= GM_GPCR_AU_ALL_DIS; gma_write16(hw, port, GM_GP_CTRL, reg); gma_read16(hw, port, GM_GP_CTRL); - switch (sky2->speed) { case SPEED_1000: reg |= GM_GPCR_SPEED_1000; @@ -441,15 +426,16 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) if (!sky2->tx_pause && !sky2->rx_pause) { sky2_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); - reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; - } else if (sky2->tx_pause &&!sky2->rx_pause) { + reg |= + GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } else if (sky2->tx_pause && !sky2->rx_pause) { /* disable Rx flow-control */ reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; } gma_write16(hw, port, GM_GP_CTRL, reg); - sky2_read16(hw, GMAC_IRQ_SRC); + sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); spin_lock_bh(&hw->phy_lock); sky2_phy_init(hw, port); @@ -460,7 +446,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); for (i = 0; i < GM_MIB_CNT_SIZE; i++) - gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + gma_read16(hw, port, GM_MIB_CNT_BASE + 8 * i); gma_write16(hw, port, GM_PHY_ADDR, reg); /* transmit control */ @@ -468,7 +454,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* receive control reg: unicast + multicast + no FCS */ gma_write16(hw, port, GM_RX_CTRL, - GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); + GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); /* transmit flow control */ gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); @@ -482,44 +468,43 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* serial mode register */ reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | - GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); if (hw->dev[port]->mtu > 1500) reg |= GM_SMOD_JUMBO_ENA; gma_write16(hw, port, GM_SERIAL_MODE, reg); - /* physical address: used for pause frames */ - gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); /* virtual address for data */ gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); - /* enable interrupt mask for counter overflows */ + /* physical address: used for pause frames */ + gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + + /* ignore counter overflows */ gma_write16(hw, port, GM_TX_IRQ_MSK, 0); gma_write16(hw, port, GM_RX_IRQ_MSK, 0); gma_write16(hw, port, GM_TR_IRQ_MSK, 0); /* Configure Rx MAC FIFO */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); - sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), + sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_OPER_ON | GMF_RX_F_FL_ON); - reg = RX_FF_FL_DEF_MSK; + /* Flush Rx MAC FIFO on any flowcontrol or error */ + reg = GMR_FS_ANY_ERR; if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1) reg = 0; /* WA Dev #4115 */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg); - /* Set threshold to 0xa (64 bytes) - * ASF disabled so no need to do WA dev #4.30 + /* Set threshold to 0xa (64 bytes) + * ASF disabled so no need to do WA dev #4.30 */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - - /* Turn off Rx fifo flush (per sk98lin) */ - sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_F_FL_OFF); } static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) @@ -529,7 +514,8 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) start /= 8; len /= 8; end = start + len - 1; - pr_debug("ramset q=%d start=0x%x end=0x%x\n", q, start, end); + + pr_debug("sky2_ramset start=%d end=%d\n", start, end); sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); sky2_write32(hw, RB_ADDR(q, RB_START), start); @@ -538,11 +524,15 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) sky2_write32(hw, RB_ADDR(q, RB_RP), start); if (q == Q_R1 || q == Q_R2) { + u32 rxup, rxlo; + + rxlo = len/2; + rxup = rxlo + len/4; + pr_debug(" utpp=%d ltpp=%d\n", rxup, rxlo); + /* Set thresholds on receive queue's */ - sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), - start + (2*len)/3); - sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), - start + (len/3)); + sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), rxup); + sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), rxlo); } else { /* Enable store & forward on Tx queue's because * Tx FIFO is only 1K on Yukon @@ -551,9 +541,9 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) } sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); + sky2_read8(hw, RB_ADDR(q, RB_CTRL)); } - /* Setup Bus Memory Interface */ static void sky2_qset(struct sky2_hw *hw, u16 q, u32 wm) { @@ -563,61 +553,63 @@ static void sky2_qset(struct sky2_hw *hw, u16 q, u32 wm) sky2_write32(hw, Q_ADDR(q, Q_WM), wm); } - /* Setup prefetch unit registers. This is the interface between * hardware and driver list elements */ static inline void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, u64 addr, u32 last) { - pr_debug("sky2 prefetch init q=%x addr=%llx last=%x\n", - Y2_QADDR(qaddr, 0), addr, last); - sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr); sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); + + sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL)); } +static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) +{ + struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; + + sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE; + return le; +} /* * This is a workaround code taken from syskonnect sk98lin driver - * to deal with chip bug in the wraparound case. + * to deal with chip bug on Yukon EC rev 0 in the wraparound case. */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx, u16 *last, u16 size) - { - BUG_ON(idx >= size); - - wmb(); if (is_ec_a1(hw) && idx < *last) { u16 hwget = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); if (hwget == 0) { /* Start prefetching again */ - sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), - 0xe0); + sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 0xe0); goto setnew; } - if (hwget == size-1) { + if (hwget == size - 1) { /* set watermark to one list element */ sky2_write8(hw, Y2_QADDR(q, PREF_UNIT_FIFO_WM), 8); /* set put index to first list element */ sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), 0); - } else /* have hardware go to end of list */ - sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), size-1); + } else /* have hardware go to end of list */ + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), + size - 1); } else { - setnew: +setnew: sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); - *last = idx; } + *last = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)); } + static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) { struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; @@ -625,61 +617,74 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) return le; } -static inline void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map, u16 len) +/* Build description to hardware about buffer */ +static inline void sky2_rx_add(struct sky2_port *sky2, struct ring_info *re) { struct sky2_rx_le *le; + u32 hi = (re->mapaddr >> 16) >> 16; - if (sizeof(map) > sizeof(u32)) { + re->idx = sky2->rx_put; + if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); - le->rx.addr = cpu_to_le32((u64) map >> 32); + le->addr = cpu_to_le32(hi); le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; + sky2->rx_addr64 = hi; } - + le = sky2_next_rx(sky2); - le->rx.addr = cpu_to_le32((u32) map); - le->length = cpu_to_le16(len); + le->addr = cpu_to_le32((u32) re->mapaddr); + le->length = cpu_to_le16(re->maplen); le->ctrl = 0; le->opcode = OP_PACKET | HW_OWNER; } +/* Tell receiver about new buffers. */ +static inline void rx_set_put(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + if (sky2->rx_last_put != sky2->rx_put) + sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, + &sky2->rx_last_put, RX_LE_SIZE); +} + /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte * order problems. */ -static void sky2_rx_set_offset(struct sky2_port *sky2) +static void rx_set_checksum(struct sky2_port *sky2) { struct sky2_rx_le *le; - sky2_write32(sky2->hw, - Q_ADDR(rxqaddr[sky2->port], Q_CSR), - sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); - le = sky2_next_rx(sky2); - le->rx.csum.start1 = ETH_HLEN; - le->rx.csum.start2 = ETH_HLEN; + le->addr = (ETH_HLEN << 16) | ETH_HLEN; le->ctrl = 0; le->opcode = OP_TCPSTART | HW_OWNER; - wmb(); - sky2_write16(sky2->hw, - Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX), - sky2->rx_put); + + sky2_write16(sky2->hw, Y2_QADDR(rxqaddr[sky2->port], + PREF_UNIT_PUT_IDX), sky2->rx_put); + sky2_read16(sky2->hw, Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX)); + mdelay(1); + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } + /* Cleanout receive buffer area, assumes receiver hardware stopped */ static void sky2_rx_clean(struct sky2_port *sky2) { unsigned i; memset(sky2->rx_le, 0, RX_LE_BYTES); - for (i = 0; i < sky2->rx_ring_size; i++) { + for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; if (re->skb) { - pci_unmap_single(sky2->hw->pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), + pci_unmap_single(sky2->hw->pdev, + re->mapaddr, re->maplen, PCI_DMA_FROMDEVICE); kfree_skb(re->skb); re->skb = NULL; @@ -687,12 +692,13 @@ static void sky2_rx_clean(struct sky2_port *sky2) } } -static inline struct sk_buff *sky2_rx_alloc_skb(struct sky2_port *sky2, - unsigned int size, int gfp_mask) +static inline struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, + unsigned int size, + unsigned int gfp_mask) { struct sk_buff *skb; - skb = alloc_skb(size, gfp_mask); + skb = alloc_skb(size + NET_IP_ALIGN, gfp_mask); if (likely(skb)) { skb->dev = sky2->netdev; skb_reserve(skb, NET_IP_ALIGN); @@ -709,29 +715,21 @@ static inline struct sk_buff *sky2_rx_alloc_skb(struct sky2_port *sky2, static int sky2_rx_fill(struct sky2_port *sky2) { unsigned i; - unsigned int rx_buf_size = sky2->netdev->mtu + ETH_HLEN + 8; + const unsigned rx_buf_size = sky2->netdev->mtu + ETH_HLEN + 8; - pr_debug("sky2_rx_fill %d\n", sky2->rx_ring_size); - for (i = 0; i < sky2->rx_ring_size; i++) { + for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; - dma_addr_t paddr; - re->skb = sky2_rx_alloc_skb(sky2, rx_buf_size, GFP_KERNEL); + re->skb = sky2_rx_alloc(sky2, rx_buf_size, GFP_KERNEL); if (!re->skb) goto nomem; - paddr = pci_map_single(sky2->hw->pdev, re->skb->data, - rx_buf_size, PCI_DMA_FROMDEVICE); - - pci_unmap_len_set(re, maplen, rx_buf_size); - pci_unmap_addr_set(re, mapaddr, paddr); - sky2_rx_add(sky2, paddr, rx_buf_size); + re->mapaddr = pci_map_single(sky2->hw->pdev, re->skb->data, + rx_buf_size, PCI_DMA_FROMDEVICE); + re->maplen = rx_buf_size; + sky2_rx_add(sky2, re); } - sky2_write16(sky2->hw, - Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX), - sky2->rx_put); - return 0; nomem: sky2_rx_clean(sky2); @@ -752,7 +750,8 @@ static int sky2_up(struct net_device *dev) /* must be power of 2 */ sky2->tx_le = pci_alloc_consistent(hw->pdev, - TX_RING_SIZE * sizeof(struct sky2_tx_le), + TX_RING_SIZE * + sizeof(struct sky2_tx_le), &sky2->tx_le_map); if (!sky2->tx_le) goto err_out; @@ -770,7 +769,7 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kmalloc(sky2->rx_ring_size * sizeof(struct ring_info), + sky2->rx_ring = kmalloc(sky2->rx_pending * sizeof(struct ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; @@ -782,8 +781,8 @@ static int sky2_up(struct net_device *dev) (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == 2)) ramsize = 4096; else { - u8 e0 = sky2_read8(hw, B2_E_0); - ramsize = (e0 == 0) ? (128*1024) : (e0 * 4096); + u8 e0 = sky2_read8(hw, B2_E_0); + ramsize = (e0 == 0) ? (128 * 1024) : (e0 * 4096); } /* 2/3 for Rx */ @@ -791,18 +790,29 @@ static int sky2_up(struct net_device *dev) sky2_ramset(hw, rxqaddr[port], 0, rxspace); sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace); + /* Make sure SyncQ is disabled */ + sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), + RB_RST_SET); + sky2_qset(hw, rxqaddr[port], is_pciex(hw) ? 0x80 : 0x600); sky2_qset(hw, txqaddr[port], 0x600); sky2->rx_put = sky2->rx_next = 0; - sky2_prefetch_init(hw, rxqaddr[port], sky2->rx_le_map, RX_LE_SIZE-1); + sky2_prefetch_init(hw, rxqaddr[port], sky2->rx_le_map, RX_LE_SIZE - 1); - sky2_rx_set_offset(sky2); + rx_set_checksum(sky2); err = sky2_rx_fill(sky2); if (err) goto err_out; + /* Give buffers to receiver */ + sky2_write16(sky2->hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX), + sky2->rx_put); + sky2->rx_last_put = sky2_read16(sky2->hw, + Y2_QADDR(rxqaddr[port], + PREF_UNIT_PUT_IDX)); + sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); @@ -827,96 +837,117 @@ err_out: return err; } -/* - * Worst case number of list elements is 36 - * TSO + CHKSUM + ADDR64 + BUFFER + (ADDR+BUFFER)*MAXFRAGS - */ -#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS) +/* Modular subtraction in ring */ +static inline int tx_dist(unsigned tail, unsigned head) +{ + return (head >= tail ? head : head + TX_RING_SIZE) - tail; +} -static inline int sky2_xmit_avail(const struct sky2_port *sky2) +/* Number of list elements available for next tx */ +static inline int tx_avail(const struct sky2_port *sky2) { - return (sky2->tx_cons > sky2->tx_prod ? 0 : TX_RING_SIZE) - + sky2->tx_cons - sky2->tx_prod - 1; + return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod); } -static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) +/* Estimate of number of transmit list elements required */ +static inline unsigned tx_le_req(const struct sk_buff *skb) { - struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; - sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE; - return le; + unsigned count; + + count = sizeof(dma_addr_t) / sizeof(u32); + count += skb_shinfo(skb)->nr_frags * count; + + if (skb_shinfo(skb)->tso_size) + ++count; + + if (skb->ip_summed) + ++count; + + return count; } -/* Put one frame in ring for transmit. */ +/* + * Put one packet in ring for transmit. + * A single packet can generate multiple list elements, and + * the number of ring elements will probably be less than the number + * of list elements used. + */ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; struct sky2_tx_le *le; struct ring_info *re; + unsigned long flags; unsigned i, len; dma_addr_t mapping; u32 addr64; u16 mss; u8 ctrl; - skb = skb_padto(skb, ETH_ZLEN); - if (!skb) - return NETDEV_TX_OK; - - if (!spin_trylock(&sky2->tx_lock)) + local_irq_save(flags); + if (!spin_trylock(&sky2->tx_lock)) { + local_irq_restore(flags); return NETDEV_TX_LOCKED; + } - if (unlikely(sky2_xmit_avail(sky2) < MAX_SKB_TX_LE)) { + if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { netif_stop_queue(dev); - spin_unlock(&sky2->tx_lock); + spin_unlock_irqrestore(&sky2->tx_lock, flags); printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", dev->name); return NETDEV_TX_BUSY; } - if (netif_msg_tx_queued(sky2)) + if (unlikely(netif_msg_tx_queued(sky2))) printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", dev->name, sky2->tx_prod, skb->len); - len = skb_headlen(skb); mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + addr64 = (mapping >> 16) >> 16; + + re = sky2->tx_ring + sky2->tx_prod; + + /* Send high bits if changed */ + if (addr64 != sky2->tx_addr64) { + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(addr64); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = addr64; + } /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->tso_size; - if (mss) { + if (mss != 0) { /* just drop the packet if non-linear expansion fails */ if (skb_header_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { - dev_kfree_skb(skb); - return NETDEV_TX_OK; + dev_kfree_skb_any(skb); + goto out_unlock; } mss += ((skb->h.th->doff - 5) * 4); /* TCP options */ mss += (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr); mss += ETH_HLEN; + } + if (mss != sky2->tx_last_mss) { le = get_tx_le(sky2); le->tx.tso.size = cpu_to_le16(mss); - le->ctrl = 0; + le->tx.tso.rsvd = 0; le->opcode = OP_LRGLEN | HW_OWNER; - } - - /* Handle Hi DMA */ - if (sizeof(mapping) > sizeof(u32)) { - addr64 = (u64)mapping >> 32; - - le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32(addr64); le->ctrl = 0; - le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_last_mss = mss; } /* Handle TCP checksum offload */ ctrl = 0; if (skb->ip_summed == CHECKSUM_HW) { - ptrdiff_t hdr = skb->h.raw - skb->data; + u16 hdr = skb->h.raw - skb->data; + u16 offset = hdr + skb->csum; ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (skb->nh.iph->protocol == IPPROTO_UDP) @@ -924,119 +955,112 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le = get_tx_le(sky2); le->tx.csum.start = cpu_to_le16(hdr); - le->tx.csum.offset = cpu_to_le16(hdr + skb->csum); - le->length = 0; + le->tx.csum.offset = cpu_to_le16(offset); + le->length = 0; /* initial checksum value */ le->ctrl = 1; /* one packet */ - le->opcode = OP_TCPLISW|HW_OWNER; + le->opcode = OP_TCPLISW | HW_OWNER; } le = get_tx_le(sky2); le->tx.addr = cpu_to_le32((u32) mapping); le->length = cpu_to_le16(len); le->ctrl = ctrl; - le->opcode = (mss ? OP_LARGESEND : OP_PACKET) |HW_OWNER; + le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); - re = &sky2->tx_ring[le - sky2->tx_le]; + /* Record the transmit mapping info */ re->skb = skb; - pci_unmap_addr_set(re, mapaddr, mapping); - pci_unmap_len_set(re, maplen, len); + re->mapaddr = mapping; + re->maplen = len; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + struct ring_info *fre; mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); - - if (sizeof(mapping) > sizeof(u32)) { - u32 hi = (u64) mapping >> 32; - if (hi != addr64) { - le = get_tx_le(sky2); - le->tx.addr = cpu_to_le32(hi); - le->ctrl = 0; - le->opcode = OP_ADDR64|HW_OWNER; - addr64 = hi; - } + addr64 = (mapping >> 16) >> 16; + if (addr64 != sky2->tx_addr64) { + le = get_tx_le(sky2); + le->tx.addr = cpu_to_le32(addr64); + le->ctrl = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = addr64; } le = get_tx_le(sky2); le->tx.addr = cpu_to_le32((u32) mapping); le->length = cpu_to_le16(frag->size); le->ctrl = ctrl; - le->opcode = OP_BUFFER|HW_OWNER; + le->opcode = OP_BUFFER | HW_OWNER; - re = &sky2->tx_ring[le - sky2->tx_le]; - pci_unmap_addr_set(re, mapaddr, mapping); - pci_unmap_len_set(re, maplen, frag->size); + fre = sky2->tx_ring + + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE; + fre->skb = NULL; + fre->mapaddr = mapping; + fre->maplen = frag->size; } - + re->idx = sky2->tx_prod; le->ctrl |= EOP; sky2_put_idx(sky2->hw, txqaddr[sky2->port], sky2->tx_prod, &sky2->tx_last_put, TX_RING_SIZE); - if (sky2_xmit_avail(sky2) < MAX_SKB_TX_LE) { - pr_debug("%s: transmit queue full\n", dev->name); + if (tx_avail(sky2) < MAX_SKB_TX_LE + 1) netif_stop_queue(dev); - } - spin_unlock(&sky2->tx_lock); + +out_unlock: + mmiowb(); + spin_unlock_irqrestore(&sky2->tx_lock, flags); dev->trans_start = jiffies; return NETDEV_TX_OK; } - /* - * Free ring elements from starting at tx_cons until done - * This unwinds the elements based on the usage assigned - * xmit routine. + * Free ring elements from starting at tx_cons until "done" + * + * NB: the hardware will tell us about partial completion of multi-part + * buffers; these are defered until completion. */ static void sky2_tx_complete(struct net_device *dev, u16 done) { struct sky2_port *sky2 = netdev_priv(dev); - unsigned idx = sky2->tx_cons; - struct sk_buff *skb = NULL; + unsigned i; - BUG_ON(done >= TX_RING_SIZE); + if (netif_msg_tx_done(sky2)) + printk(KERN_DEBUG "%s: tx done, upto %u\n", dev->name, done); spin_lock(&sky2->tx_lock); - while (idx != done) { - struct ring_info *re = sky2->tx_ring + idx; - struct sky2_tx_le *le = sky2->tx_le + idx; - - BUG_ON(le->opcode == 0); - - switch(le->opcode & ~HW_OWNER) { - case OP_LARGESEND: - case OP_PACKET: - if (skb) - dev_kfree_skb_any(skb); - skb = re->skb; - BUG_ON(!skb); - re->skb = NULL; - pci_unmap_single(sky2->hw->pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; + while (sky2->tx_cons != done) { + struct ring_info *re = sky2->tx_ring + sky2->tx_cons; + struct sk_buff *skb; - case OP_BUFFER: - pci_unmap_page(sky2->hw->pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; + /* Check for partial status */ + if (tx_dist(sky2->tx_cons, done) + < tx_dist(sky2->tx_cons, re->idx)) + goto out; + + skb = re->skb; + pci_unmap_single(sky2->hw->pdev, + re->mapaddr, re->maplen, PCI_DMA_TODEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct ring_info *fre; + fre = + sky2->tx_ring + (sky2->tx_cons + i + + 1) % TX_RING_SIZE; + pci_unmap_page(sky2->hw->pdev, fre->mapaddr, + fre->maplen, PCI_DMA_TODEVICE); } - le->opcode = 0; - idx = (idx + 1) % TX_RING_SIZE; - } - - if (skb) dev_kfree_skb_any(skb); - sky2->tx_cons = idx; - if (sky2_xmit_avail(sky2) > MAX_SKB_TX_LE) + sky2->tx_cons = re->idx; + } +out: + + if (netif_queue_stopped(dev) && tx_avail(sky2) > MAX_SKB_TX_LE) netif_wake_queue(dev); spin_unlock(&sky2->tx_lock); } @@ -1061,22 +1085,24 @@ static int sky2_down(struct net_device *dev) netif_stop_queue(dev); + sky2_phy_reset(hw, port); + /* Stop transmitter */ sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP); sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR)); sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), - RB_RST_SET|RB_DIS_OP_MD); + RB_RST_SET | RB_DIS_OP_MD); ctrl = gma_read16(hw, port, GM_GP_CTRL); - ctrl &= ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA); + ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); /* Workaround shared GMAC reset */ - if (! (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 - && port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) + if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 + && port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); /* Disable Force Sync bit and Enable Alloc bit */ @@ -1088,7 +1114,8 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); /* Reset the PCI FIFO of the async Tx queue */ - sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), + BMU_RST_SET | BMU_FIFO_RST); /* Reset the Tx prefetch units */ sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL), @@ -1144,6 +1171,9 @@ static int sky2_down(struct net_device *dev) static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) { + if (!hw->copper) + return SPEED_1000; + if (hw->chip_id == CHIP_ID_YUKON_FE) return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; @@ -1163,14 +1193,16 @@ static void sky2_link_up(struct sky2_port *sky2) unsigned port = sky2->port; u16 reg; + /* disable Rx GMAC FIFO flush mode */ + sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_F_FL_OFF); + /* Enable Transmit FIFO Underrun */ - sky2_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); + sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); reg = gma_read16(hw, port, GM_GP_CTRL); if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE) reg |= GM_GPCR_DUP_FULL; - /* enable Rx/Tx */ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; gma_write16(hw, port, GM_GP_CTRL, reg); @@ -1182,17 +1214,30 @@ static void sky2_link_up(struct sky2_port *sky2) netif_wake_queue(sky2->netdev); /* Turn on link LED */ - sky2_write8(hw, SK_REG(port, LNK_LED_REG), + sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */ + PHY_M_LEDC_INIT_CTRL(sky2->speed == + SPEED_10 ? 7 : 0) | + PHY_M_LEDC_STA1_CTRL(sky2->speed == + SPEED_100 ? 7 : 0) | + PHY_M_LEDC_STA0_CTRL(sky2->speed == + SPEED_1000 ? 7 : 0)); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } + if (netif_msg_link(sky2)) printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex, flowcontrol %s\n", sky2->netdev->name, sky2->speed, sky2->duplex == DUPLEX_FULL ? "full" : "half", (sky2->tx_pause && sky2->rx_pause) ? "both" : - sky2->tx_pause ? "tx" : - sky2->rx_pause ? "rx" : "none"); + sky2->tx_pause ? "tx" : sky2->rx_pause ? "rx" : "none"); } static void sky2_link_down(struct sky2_port *sky2) @@ -1211,9 +1256,8 @@ static void sky2_link_down(struct sky2_port *sky2) if (sky2->rx_pause && !sky2->tx_pause) { /* restore Asymmetric Pause bit */ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, - gm_phy_read(hw, port, - PHY_MARV_AUNE_ADV) - | PHY_M_AN_ASP); + gm_phy_read(hw, port, PHY_MARV_AUNE_ADV) + | PHY_M_AN_ASP); } sky2_phy_reset(hw, port); @@ -1229,6 +1273,51 @@ static void sky2_link_down(struct sky2_port *sky2) sky2_phy_init(hw, port); } +static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) +{ + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + u16 lpa; + + lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); + + if (lpa & PHY_M_AN_RF) { + printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name); + return -1; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE && + gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { + printk(KERN_ERR PFX "%s: master/slave fault", + sky2->netdev->name); + return -1; + } + + if (!(aux & PHY_M_PS_SPDUP_RES)) { + printk(KERN_ERR PFX "%s: speed/duplex mismatch", + sky2->netdev->name); + return -1; + } + + sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + + sky2->speed = sky2_phy_speed(hw, aux); + + /* Pause bits are offset (9..8) */ + if (hw->chip_id == CHIP_ID_YUKON_XL) + aux >>= 6; + + sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0; + sky2->tx_pause = (aux & PHY_M_PS_TX_P_EN) != 0; + + if ((sky2->tx_pause || sky2->rx_pause) + && !(sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + else + sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + + return 0; +} /* * Interrrupt from PHY are handled in tasklet (soft irq) @@ -1237,69 +1326,42 @@ static void sky2_link_down(struct sky2_port *sky2) */ static void sky2_phy_task(unsigned long data) { - struct sky2_port *sky2 = (struct sky2_port *) data; + struct sky2_port *sky2 = (struct sky2_port *)data; struct sky2_hw *hw = sky2->hw; - unsigned port = sky2->port; u16 istatus, phystat; - istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); - - phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + spin_lock(&hw->phy_lock); + istatus = gm_phy_read(hw, sky2->port, PHY_MARV_INT_STAT); + phystat = gm_phy_read(hw, sky2->port, PHY_MARV_PHY_STAT); if (netif_msg_intr(sky2)) printk(KERN_INFO PFX "%s: phy interrupt status 0x%x 0x%x\n", sky2->netdev->name, istatus, phystat); if (istatus & PHY_M_IS_AN_COMPL) { - u16 lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP); + if (sky2_autoneg_done(sky2, phystat) == 0) + sky2_link_up(sky2); + goto out; + } - if (lpa & PHY_M_AN_RF) { - printk(KERN_ERR PFX "%s: remote fault", - sky2->netdev->name); - } - else if (hw->chip_id != CHIP_ID_YUKON_FE - && gm_phy_read(hw, port, PHY_MARV_1000T_STAT) - & PHY_B_1000S_MSF) { - printk(KERN_ERR PFX "%s: master/slave fault", - sky2->netdev->name); - } - else if (!(phystat & PHY_M_PS_SPDUP_RES)) { - printk(KERN_ERR PFX "%s: speed/duplex mismatch", - sky2->netdev->name); - } - else { - sky2->duplex = (phystat & PHY_M_PS_FULL_DUP) - ? DUPLEX_FULL : DUPLEX_HALF; + if (istatus & PHY_M_IS_LSP_CHANGE) + sky2->speed = sky2_phy_speed(hw, phystat); - sky2->speed = sky2_phy_speed(hw, phystat); - - sky2->tx_pause = (phystat & PHY_M_PS_TX_P_EN) != 0; - sky2->rx_pause = (phystat & PHY_M_PS_RX_P_EN) != 0; + if (istatus & PHY_M_IS_DUP_CHANGE) + sky2->duplex = + (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; - if ((!sky2->tx_pause && !sky2->rx_pause) || - (sky2->speed < SPEED_1000 && sky2->duplex == DUPLEX_HALF)) - sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); - else - sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + if (istatus & PHY_M_IS_LST_CHANGE) { + if (phystat & PHY_M_PS_LINK_UP) sky2_link_up(sky2); - } - } else { - - if (istatus & PHY_M_IS_LSP_CHANGE) - sky2->speed = sky2_phy_speed(hw, phystat); - - if (istatus & PHY_M_IS_DUP_CHANGE) - sky2->duplex = (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; - if (istatus & PHY_M_IS_LST_CHANGE) { - if (phystat & PHY_M_PS_LINK_UP) - sky2_link_up(sky2); - else - sky2_link_down(sky2); - } + else + sky2_link_down(sky2); } +out: + spin_unlock(&hw->phy_lock); local_irq_disable(); - hw->intr_mask |= (port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; + hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; sky2_write32(hw, B0_IMSK, hw->intr_mask); local_irq_enable(); } @@ -1346,63 +1408,78 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, struct net_device *dev = hw->dev[port]; struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; - struct sk_buff *skb = re->skb; - dma_addr_t mapping; + struct sk_buff *skb, *nskb; const unsigned int rx_buf_size = dev->mtu + ETH_HLEN + 8; if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", dev->name, sky2->rx_next, status, length); - sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_ring_size; - - pci_unmap_single(sky2->hw->pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_FROMDEVICE); - prefetch(skb->data); + sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; - if (!(status & GMR_FS_RX_OK) - || (status & GMR_FS_ANY_ERR) - || (length << 16) != (status & GMR_FS_LEN) - || length > rx_buf_size) + skb = NULL; + if (!(status & GMR_FS_RX_OK) + || (status & GMR_FS_ANY_ERR) + || (length << 16) != (status & GMR_FS_LEN) + || length > rx_buf_size) goto error; - re->skb = sky2_rx_alloc_skb(sky2, rx_buf_size, GFP_ATOMIC); - if (!re->skb) - goto reuse; - -submit: - mapping = pci_map_single(sky2->hw->pdev, re->skb->data, - rx_buf_size, PCI_DMA_FROMDEVICE); + if (length < RX_COPY_THRESHOLD) { + nskb = sky2_rx_alloc(sky2, length, GFP_ATOMIC); + if (!nskb) + goto resubmit; + + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, + length, PCI_DMA_FROMDEVICE); + memcpy(nskb->data, re->skb->data, length); + pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, + length, PCI_DMA_FROMDEVICE); + skb = nskb; + } else { + nskb = sky2_rx_alloc(sky2, rx_buf_size, GFP_ATOMIC); + if (!nskb) + goto resubmit; - pci_unmap_len_set(re, maplen, rx_buf_size); - pci_unmap_addr_set(re, mapaddr, mapping); + skb = re->skb; + pci_unmap_single(sky2->hw->pdev, re->mapaddr, + re->maplen, PCI_DMA_FROMDEVICE); + prefetch(skb->data); - sky2_rx_add(sky2, mapping, rx_buf_size); - sky2_put_idx(sky2->hw, rxqaddr[sky2->port], - sky2->rx_put, &sky2->rx_last_put, RX_LE_SIZE); + re->skb = nskb; + re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, + rx_buf_size, PCI_DMA_FROMDEVICE); + re->maplen = rx_buf_size; + } +resubmit: + BUG_ON(re->skb == skb); + sky2_rx_add(sky2, re); return skb; error: + if (status & GMR_FS_GOOD_FC) + goto resubmit; + if (netif_msg_rx_err(sky2)) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", sky2->netdev->name, status, length); - - if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + + if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE)) sky2->net_stats.rx_length_errors++; if (status & GMR_FS_FRAGMENT) sky2->net_stats.rx_frame_errors++; if (status & GMR_FS_CRC_ERR) sky2->net_stats.rx_crc_errors++; -reuse: - re->skb = skb; - skb = NULL; - goto submit; + if (status & GMR_FS_RX_FF_OV) + sky2->net_stats.rx_fifo_errors++; + goto resubmit; } -static u16 get_tx_index(u8 port, u32 status, u16 len) +/* Transmit ring index in reported status block is encoded as: + * + * | TXS2 | TXA2 | TXS1 | TXA1 + */ +static inline u16 tx_index(u8 port, u32 status, u16 len) { if (port == 0) return status & 0xfff; @@ -1411,10 +1488,8 @@ static u16 get_tx_index(u8 port, u32 status, u16 len) } /* - * NAPI poll routine. * Both ports share the same status interrupt, therefore there is only * one poll routine. - * */ static int sky2_poll(struct net_device *dev, int *budget) { @@ -1422,31 +1497,27 @@ static int sky2_poll(struct net_device *dev, int *budget) struct sky2_hw *hw = sky2->hw; unsigned int to_do = min(dev->quota, *budget); unsigned int work_done = 0; + u16 hwidx; unsigned char summed[2] = { CHECKSUM_NONE, CHECKSUM_NONE }; - unsigned int csum[2] = { 0 }; - unsigned int rx_handled[2] = { 0, 0}; - u16 last; - - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); - last = sky2_read16(hw, STAT_PUT_IDX); + unsigned int csum[2]; - while (hw->st_idx != last && work_done < to_do) { + hwidx = sky2_read16(hw, STAT_PUT_IDX); + rmb(); + while (hw->st_idx != hwidx && work_done < to_do) { struct sky2_status_le *le = hw->st_le + hw->st_idx; struct sk_buff *skb; u8 port; u32 status; u16 length; - rmb(); status = le32_to_cpu(le->status); length = le16_to_cpu(le->length); port = le->link; - BUG_ON(port >= hw->ports); + BUG_ON(port >= hw->ports || hw->dev[port] == NULL); - switch(le->opcode & ~HW_OWNER) { + switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: - ++rx_handled[port]; skb = sky2_receive(hw, port, length, status); if (likely(skb)) { __skb_put(skb, length); @@ -1475,7 +1546,7 @@ static int sky2_poll(struct net_device *dev, int *budget) case OP_TXINDEXLE: sky2_tx_complete(hw->dev[port], - get_tx_index(port, status, length)); + tx_index(port, status, length)); break; case OP_RXTIMESTAMP: @@ -1483,14 +1554,27 @@ static int sky2_poll(struct net_device *dev, int *budget) default: if (net_ratelimit()) - printk(KERN_WARNING PFX "unknown status opcode 0x%x\n", + printk(KERN_WARNING PFX + "unknown status opcode 0x%x\n", le->opcode); break; } - hw->st_idx = (hw->st_idx + 1) & (STATUS_RING_SIZE -1); + hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; + if (hw->st_idx == hwidx) { + hwidx = sky2_read16(hw, STAT_PUT_IDX); + rmb(); + } } + mmiowb(); + + if (hw->dev[0]) + rx_set_put(hw->dev[0]); + + if (hw->dev[1]) + rx_set_put(hw->dev[1]); + *budget -= work_done; dev->quota -= work_done; if (work_done < to_do) { @@ -1505,6 +1589,7 @@ static int sky2_poll(struct net_device *dev, int *budget) hw->intr_mask |= Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); + sky2_read32(hw, B0_IMSK); netif_rx_complete(dev); } @@ -1553,40 +1638,35 @@ static void sky2_hw_intr(struct sky2_hw *hw) { u32 status = sky2_read32(hw, B0_HWE_ISRC); - if (status & Y2_IS_TIST_OV) { - pr_debug (PFX "%s: unused timer overflow??\n", - pci_name(hw->pdev)); + if (status & Y2_IS_TIST_OV) sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); - } if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { - u16 pci_err = sky2_read16(hw, PCI_C(PCI_STATUS)); + u16 pci_err; + + pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err); printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n", pci_name(hw->pdev), pci_err); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_write16(hw, PCI_C(PCI_STATUS), - pci_err | PCI_STATUS_ERROR_BITS); + pci_write_config_word(hw->pdev, PCI_STATUS, + pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_IS_PCI_EXP) { /* PCI-Express uncorrectable Error occured */ - u32 pex_err = sky2_read32(hw, PCI_C(PEX_UNC_ERR_STAT)); + u32 pex_err; + + pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err); - /* - * On PCI-Express bus bridges are called root complexes. - * PCI-Express errors are recognized by the root complex too, - * which requests the system to handle the problem. After error - * occurence it may be that no access to the adapter may be performed - * any longer. - */ printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", pci_name(hw->pdev), pex_err); /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_write32(hw, PCI_C(PEX_UNC_ERR_STAT), 0xffffffffUL); + pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + 0xffffffffUL); sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); if (pex_err & PEX_FATAL_ERRORS) { @@ -1622,7 +1702,6 @@ static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) ++sky2->net_stats.tx_fifo_errors; sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU); } - } static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) @@ -1641,19 +1720,22 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) u32 status; status = sky2_read32(hw, B0_Y2_SP_ISRC2); - if (status == 0 || status == ~0) /* hotplug or shared irq */ + if (status == 0 || status == ~0) return IRQ_NONE; if (status & Y2_IS_HW_ERR) sky2_hw_intr(hw); - if ((status & Y2_IS_STAT_BMU) && netif_rx_schedule_prep(hw->dev[0])) { + /* Do NAPI for Rx and Tx status */ + if ((status & Y2_IS_STAT_BMU) && netif_rx_schedule_test(hw->dev[0])) { + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + hw->intr_mask &= ~Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); __netif_rx_schedule(hw->dev[0]); } - if (status & Y2_IS_IRQ_PHY1) + if (status & Y2_IS_IRQ_PHY1) sky2_phy_intr(hw, 0); if (status & Y2_IS_IRQ_PHY2) @@ -1665,8 +1747,10 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) if (status & Y2_IS_IRQ_MAC2) sky2_mac_intr(hw, 1); - sky2_write32(hw, B0_Y2_SP_ICR, 2); + + sky2_read32(hw, B0_IMSK); + return IRQ_HANDLED; } @@ -1675,21 +1759,19 @@ static void sky2_netpoll(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); - disable_irq(dev->irq); - sky2_intr(dev->irq, sky2->hw, NULL); - enable_irq(dev->irq); + sky2_intr(sky2->hw->pdev->irq, sky2->hw, NULL); } #endif /* Chip internal frequency for clock calculations */ static inline u32 sky2_khz(const struct sky2_hw *hw) { - switch(hw->chip_id) { + switch (hw->chip_id) { case CHIP_ID_YUKON_EC: return 125000; /* 125 Mhz */ case CHIP_ID_YUKON_FE: return 100000; /* 100 Mhz */ - default: /* YUKON_XL */ + default: /* YUKON_XL */ return 156000; /* 156 Mhz */ } } @@ -1701,7 +1783,7 @@ static inline u32 sky2_ms2clk(const struct sky2_hw *hw, u32 ms) static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) { - return (sky2_khz(hw) * 75) / 1000; + return (sky2_khz(hw) * us) / 1000; } static int sky2_reset(struct sky2_hw *hw) @@ -1721,6 +1803,12 @@ static int sky2_reset(struct sky2_hw *hw) return -EOPNOTSUPP; } + /* ring for status responses */ + hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, + &hw->st_dma); + if (!hw->st_le) + return -ENOMEM; + /* disable ASF */ if (hw->chip_id <= CHIP_ID_YUKON_EC) { sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); @@ -1732,17 +1820,19 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); /* clear PCI errors, if any */ - status = sky2_read16(hw, PCI_C(PCI_STATUS)); + pci_read_config_word(hw->pdev, PCI_STATUS, &status); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_write16(hw, PCI_C(PCI_STATUS), - status | PCI_STATUS_ERROR_BITS); + pci_write_config_word(hw->pdev, PCI_STATUS, + status | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B0_CTST, CS_MRST_CLR); /* clear any PEX errors */ if (is_pciex(hw)) { - sky2_write32(hw, PCI_C(PEX_UNC_ERR_STAT), 0xffffffffUL); - sky2_read16(hw, PCI_C(PEX_LNK_STAT)); + u16 lstat; + pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT, + 0xffffffffUL); + pci_read_config_word(hw->pdev, PEX_LNK_STAT, &lstat); } pmd_type = sky2_read8(hw, B2_PMD_TYP); @@ -1769,20 +1859,20 @@ static int sky2_reset(struct sky2_hw *hw) Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); - else - sky2_write8(hw, B2_Y2_CLK_GATE, 0); + else + sky2_write8(hw, B2_Y2_CLK_GATE, 0); /* Turn off phy power saving */ - power = sky2_read32(hw, PCI_C(PCI_DEV_REG1)); - power &= ~(PCI_Y2_PHY1_POWD|PCI_Y2_PHY2_POWD); + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &power); + power &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - /* back asswards .. */ + /* looks like this xl is back asswards .. */ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { power |= PCI_Y2_PHY1_COMA; if (hw->ports > 1) power |= PCI_Y2_PHY2_COMA; } - sky2_write32(hw, PCI_C(PCI_DEV_REG1), power); + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, power); for (i = 0; i < hw->ports; i++) { sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); @@ -1791,20 +1881,22 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - sky2_write32(hw, B2_I2C_IRQ, 1); /* Clear I2C IRQ noise */ + /* Clear I2C IRQ noise */ + sky2_write32(hw, B2_I2C_IRQ, 1); /* turn off hardware timer (unused) */ sky2_write8(hw, B2_TI_CTRL, TIM_STOP); sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); - + sky2_write8(hw, B0_Y2LED, LED_STAT_ON); - /* Turn on descriptor polling -- is this necessary? */ + /* Turn on descriptor polling (every 75us) */ sky2_write32(hw, B28_DPT_INI, sky2_us2clk(hw, 75)); sky2_write8(hw, B28_DPT_CTRL, DPT_START); /* Turn off receive timestamp */ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); + sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); /* enable the Tx Arbiters */ for (i = 0; i < hw->ports; i++) @@ -1812,7 +1904,7 @@ static int sky2_reset(struct sky2_hw *hw) /* Initialize ram interface */ for (i = 0; i < hw->ports; i++) { - sky2_write16(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); + sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR); sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53); sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53); @@ -1828,35 +1920,27 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); } - /* Optimize PCI Express access */ if (is_pciex(hw)) { - u16 ctrl = sky2_read32(hw, PCI_C(PEX_DEV_CTRL)); - ctrl &= ~PEX_DC_MAX_RRS_MSK; - ctrl |= PEX_DC_MAX_RD_RQ_SIZE(4); + u16 pctrl; + + /* change Max. Read Request Size to 2048 bytes */ + pci_read_config_word(hw->pdev, PEX_DEV_CTRL, &pctrl); + pctrl &= ~PEX_DC_MAX_RRS_MSK; + pctrl |= PEX_DC_MAX_RD_RQ_SIZE(4); + + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_write16(hw, PCI_C(PEX_DEV_CTRL), ctrl); + pci_write_config_word(hw->pdev, PEX_DEV_CTRL, pctrl); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); - hw->intr_mask = Y2_IS_BASE; - sky2_write32(hw, B0_IMSK, hw->intr_mask); - - /* disable all GMAC IRQ's */ - sky2_write8(hw, GMAC_IRQ_MSK, 0); - spin_lock_bh(&hw->phy_lock); for (i = 0; i < hw->ports; i++) sky2_phy_reset(hw, i); spin_unlock_bh(&hw->phy_lock); - /* Setup ring for status responses */ - hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES, - &hw->st_dma); - if (!hw->st_le) - return -ENOMEM; - memset(hw->st_le, 0, STATUS_LE_BYTES); hw->st_idx = 0; @@ -1864,30 +1948,25 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR); sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma); - sky2_write32(hw, STAT_LIST_ADDR_HI, (u64)hw->st_dma >> 32); + sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32); /* Set the list last index */ - sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE-1); + sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_ms2clk(hw, 10)); + + /* These status setup values are copied from SysKonnect's driver */ if (is_ec_a1(hw)) { /* WA for dev. #4.3 */ - sky2_write16(hw, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK); + sky2_write16(hw, STAT_TX_IDX_TH, 0xfff); /* Tx Threshold */ /* set Status-FIFO watermark */ sky2_write8(hw, STAT_FIFO_WM, 0x21); /* WA for dev. #4.18 */ /* set Status-FIFO ISR watermark */ - sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07);/* WA for dev. #4.18 */ + sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07); /* WA for dev. #4.18 */ - /* WA for dev. #4.3 and #4.18 */ - /* set Status-FIFO Tx timer init value */ - sky2_write32(hw, STAT_TX_TIMER_INI, sky2_ms2clk(hw, 10)); } else { - /* - * Theses settings should avoid the - * temporary hanging of the status BMU. - * May be not all required... still under investigation... - */ sky2_write16(hw, STAT_TX_IDX_TH, 0x000a); /* set Status-FIFO watermark */ @@ -1897,14 +1976,13 @@ static int sky2_reset(struct sky2_hw *hw) if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) sky2_write8(hw, STAT_FIFO_ISR_WM, 0x10); - else /* WA 4109 */ + else /* WA 4109 */ sky2_write8(hw, STAT_FIFO_ISR_WM, 0x04); sky2_write32(hw, STAT_ISR_TIMER_INI, 0x0190); } - /* enable the prefetch unit */ - /* operational bit not functional for Yukon-EC, but fixed in Yukon-2? */ + /* enable status unit */ sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON); sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); @@ -1918,23 +1996,22 @@ static inline u32 sky2_supported_modes(const struct sky2_hw *hw) { u32 modes; if (hw->copper) { - modes = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_Autoneg| SUPPORTED_TP; + modes = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; if (hw->chip_id != CHIP_ID_YUKON_FE) modes |= SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full; + | SUPPORTED_1000baseT_Full; } else modes = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE - | SUPPORTED_Autoneg; + | SUPPORTED_Autoneg; return modes; } -static int sky2_get_settings(struct net_device *dev, - struct ethtool_cmd *ecmd) +static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; @@ -1944,13 +2021,12 @@ static int sky2_get_settings(struct net_device *dev, ecmd->phy_address = PHY_ADDR_MARV; if (hw->copper) { ecmd->supported = SUPPORTED_10baseT_Half - - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg| SUPPORTED_TP; + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg | SUPPORTED_TP; ecmd->port = PORT_TP; } else ecmd->port = PORT_FIBRE; @@ -1975,7 +2051,7 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else { u32 setting; - switch(ecmd->speed) { + switch (ecmd->speed) { case SPEED_1000: if (ecmd->duplex == DUPLEX_FULL) setting = SUPPORTED_1000baseT_Full; @@ -2035,8 +2111,8 @@ static void sky2_get_drvinfo(struct net_device *dev, } static const struct sky2_stat { - char name[ETH_GSTRING_LEN]; - u16 offset; + char name[ETH_GSTRING_LEN]; + u16 offset; } sky2_stats[] = { { "tx_bytes", GM_TXO_OK_HI }, { "rx_bytes", GM_RXO_OK_HI }, @@ -2061,7 +2137,6 @@ static const struct sky2_stat { { "rx_fcs_error", GM_RXF_FCS_ERR }, }; - static u32 sky2_get_rx_csum(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); @@ -2074,6 +2149,7 @@ static int sky2_set_rx_csum(struct net_device *dev, u32 data) struct sky2_port *sky2 = netdev_priv(dev); sky2->rx_csum = data; + sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), data ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); @@ -2086,22 +2162,21 @@ static u32 sky2_get_msglevel(struct net_device *netdev) return sky2->msg_enable; } -static void sky2_phy_stats(struct sky2_port *sky2, u64 *data) +static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) { struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; int i; data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 - | (u64) gma_read32(hw, port, GM_TXO_OK_LO); + | (u64) gma_read32(hw, port, GM_TXO_OK_LO); data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 - | (u64) gma_read32(hw, port, GM_RXO_OK_LO); + | (u64) gma_read32(hw, port, GM_RXO_OK_LO); - for (i = 2; i < ARRAY_SIZE(sky2_stats); i++) + for (i = 2; i < count; i++) data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset); } - static void sky2_set_msglevel(struct net_device *netdev, u32 value) { struct sky2_port *sky2 = netdev_priv(netdev); @@ -2114,14 +2189,14 @@ static int sky2_get_stats_count(struct net_device *dev) } static void sky2_get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *stats, u64 *data) + struct ethtool_stats *stats, u64 * data) { struct sky2_port *sky2 = netdev_priv(dev); - sky2_phy_stats(sky2, data); + sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats)); } -static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 *data) +static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data) { int i; @@ -2141,9 +2216,9 @@ static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 *data) static struct net_device_stats *sky2_get_stats(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); - u64 data[ARRAY_SIZE(sky2_stats)]; + u64 data[13]; - sky2_phy_stats(sky2, data); + sky2_phy_stats(sky2, data, ARRAY_SIZE(data)); sky2->net_stats.tx_bytes = data[0]; sky2->net_stats.rx_bytes = data[1]; @@ -2167,9 +2242,9 @@ static int sky2_set_mac_address(struct net_device *dev, void *p) sky2_down(dev); memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port*8, + memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8, dev->dev_addr, ETH_ALEN); - memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port*8, + memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8, dev->dev_addr, ETH_ALEN); if (dev->flags & IFF_UP) err = sky2_up(dev); @@ -2190,11 +2265,11 @@ static void sky2_set_multicast(struct net_device *dev) reg = gma_read16(hw, port, GM_RX_CTRL); reg |= GM_RXCR_UCF_ENA; - if (dev->flags & IFF_PROMISC) /* promiscious */ + if (dev->flags & IFF_PROMISC) /* promiscious */ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); - else if (dev->flags & IFF_ALLMULTI) /* all multicast */ + else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */ memset(filter, 0xff, sizeof(filter)); - else if (dev->mc_count == 0) /* no multicast */ + else if (dev->mc_count == 0) /* no multicast */ reg &= ~GM_RXCR_MCF_ENA; else { int i; @@ -2202,19 +2277,18 @@ static void sky2_set_multicast(struct net_device *dev) for (i = 0; list && i < dev->mc_count; i++, list = list->next) { u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; - filter[bit/8] |= 1 << (bit%8); + filter[bit / 8] |= 1 << (bit % 8); } } - gma_write16(hw, port, GM_MC_ADDR_H1, - (u16)filter[0] | ((u16)filter[1] << 8)); + (u16) filter[0] | ((u16) filter[1] << 8)); gma_write16(hw, port, GM_MC_ADDR_H2, - (u16)filter[2] | ((u16)filter[3] << 8)); + (u16) filter[2] | ((u16) filter[3] << 8)); gma_write16(hw, port, GM_MC_ADDR_H3, - (u16)filter[4] | ((u16)filter[5] << 8)); + (u16) filter[4] | ((u16) filter[5] << 8)); gma_write16(hw, port, GM_MC_ADDR_H4, - (u16)filter[6] | ((u16)filter[7] << 8)); + (u16) filter[6] | ((u16) filter[7] << 8)); gma_write16(hw, port, GM_RX_CTRL, reg); } @@ -2224,24 +2298,38 @@ static void sky2_set_multicast(struct net_device *dev) */ static inline void sky2_led(struct sky2_hw *hw, unsigned port, int on) { + u16 pg; + spin_lock_bh(&hw->phy_lock); - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - if (on) + switch (hw->chip_id) { + case CHIP_ID_YUKON_XL: + pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + on ? (PHY_M_LEDC_LOS_CTRL(1) | + PHY_M_LEDC_INIT_CTRL(7) | + PHY_M_LEDC_STA1_CTRL(7) | + PHY_M_LEDC_STA0_CTRL(7)) + : 0); + + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + break; + + default: + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); gm_phy_write(hw, port, PHY_MARV_LED_OVER, - PHY_M_LED_MO_DUP(MO_LED_ON) | - PHY_M_LED_MO_10(MO_LED_ON) | - PHY_M_LED_MO_100(MO_LED_ON) | + on ? PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | PHY_M_LED_MO_1000(MO_LED_ON) | - PHY_M_LED_MO_RX(MO_LED_ON)); - else - gm_phy_write(hw, port, PHY_MARV_LED_OVER, - - PHY_M_LED_MO_DUP(MO_LED_OFF) | - PHY_M_LED_MO_10(MO_LED_OFF) | - PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_ON) + : PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | PHY_M_LED_MO_1000(MO_LED_OFF) | PHY_M_LED_MO_RX(MO_LED_OFF)); + } spin_unlock_bh(&hw->phy_lock); } @@ -2251,19 +2339,26 @@ static int sky2_phys_id(struct net_device *dev, u32 data) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u16 ledctrl, ledover; + u16 ledctrl, ledover = 0; long ms; int onoff = 1; - if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); else ms = data * 1000; /* save initial values */ spin_lock_bh(&hw->phy_lock); - ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); - ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else { + ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); + ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); + } spin_unlock_bh(&hw->phy_lock); while (ms > 0) { @@ -2277,8 +2372,15 @@ static int sky2_phys_id(struct net_device *dev, u32 data) /* resume regularly scheduled programming */ spin_lock_bh(&hw->phy_lock); - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else { + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + } spin_unlock_bh(&hw->phy_lock); return 0; @@ -2344,30 +2446,102 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) } #endif +static void sky2_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct sky2_port *sky2 = netdev_priv(dev); + + ering->rx_max_pending = RX_MAX_PENDING; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + ering->tx_max_pending = TX_RING_SIZE - 1; + + ering->rx_pending = sky2->rx_pending; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + ering->tx_pending = sky2->tx_pending; +} + +static int sky2_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *ering) +{ + struct sky2_port *sky2 = netdev_priv(dev); + int err = 0; + + if (ering->rx_pending > RX_MAX_PENDING || + ering->rx_pending < 8 || + ering->tx_pending < MAX_SKB_TX_LE || + ering->tx_pending > TX_RING_SIZE - 1) + return -EINVAL; + + if (netif_running(dev)) + sky2_down(dev); + + sky2->rx_pending = ering->rx_pending; + sky2->tx_pending = ering->tx_pending; + + if (netif_running(dev)) + err = sky2_up(dev); + + return err; +} + +#define SKY2_REGS_LEN 0x1000 +static int sky2_get_regs_len(struct net_device *dev) +{ + return SKY2_REGS_LEN; +} + +/* + * Returns copy of control register region + * I/O region is divided into banks and certain regions are unreadable + */ +static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + const struct sky2_port *sky2 = netdev_priv(dev); + unsigned long offs; + const void __iomem *io = sky2->hw->regs; + static const unsigned long bankmap = 0xfff3f305; + + regs->version = 1; + for (offs = 0; offs < regs->len; offs += 128) { + u32 len = min_t(u32, 128, regs->len - offs); + + if (bankmap & (1 << (offs / 128))) + memcpy_fromio(p + offs, io + offs, len); + else + memset(p + offs, 0, len); + } +} static struct ethtool_ops sky2_ethtool_ops = { - .get_settings = sky2_get_settings, - .set_settings = sky2_set_settings, - .get_drvinfo = sky2_get_drvinfo, - .get_msglevel = sky2_get_msglevel, - .set_msglevel = sky2_set_msglevel, - .get_link = ethtool_op_get_link, - .get_sg = ethtool_op_get_sg, - .set_sg = ethtool_op_set_sg, - .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = ethtool_op_set_tx_csum, - .get_tso = ethtool_op_get_tso, - .set_tso = ethtool_op_set_tso, - .get_rx_csum = sky2_get_rx_csum, - .set_rx_csum = sky2_set_rx_csum, - .get_strings = sky2_get_strings, + .get_settings = sky2_get_settings, + .set_settings = sky2_set_settings, + .get_drvinfo = sky2_get_drvinfo, + .get_msglevel = sky2_get_msglevel, + .set_msglevel = sky2_set_msglevel, + .get_regs_len = sky2_get_regs_len, + .get_regs = sky2_get_regs, + .get_link = ethtool_op_get_link, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, + .get_rx_csum = sky2_get_rx_csum, + .set_rx_csum = sky2_set_rx_csum, + .get_strings = sky2_get_strings, + .get_ringparam = sky2_get_ringparam, + .set_ringparam = sky2_set_ringparam, .get_pauseparam = sky2_get_pauseparam, .set_pauseparam = sky2_set_pauseparam, #ifdef CONFIG_PM - .get_wol = sky2_get_wol, - .set_wol = sky2_set_wol, + .get_wol = sky2_get_wol, + .set_wol = sky2_set_wol, #endif - .phys_id = sky2_phys_id, + .phys_id = sky2_phys_id, .get_stats_count = sky2_get_stats_count, .get_ethtool_stats = sky2_get_ethtool_stats, }; @@ -2402,7 +2576,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = sky2_netpoll; #endif - dev->irq = hw->pdev->irq; sky2 = netdev_priv(dev); sky2->netdev = dev; @@ -2418,20 +2591,21 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->speed = -1; sky2->advertising = sky2_supported_modes(hw); sky2->rx_csum = 1; - sky2->rx_ring_size = is_ec_a1(hw) ? MIN_RX_BUFFERS : MAX_RX_BUFFERS; - tasklet_init(&sky2->phy_task, sky2_phy_task, (unsigned long) sky2); + tasklet_init(&sky2->phy_task, sky2_phy_task, (unsigned long)sky2); + sky2->tx_pending = TX_DEF_PENDING; + sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING; hw->dev[port] = dev; sky2->port = port; - dev->features |= NETIF_F_LLTX; + dev->features |= NETIF_F_LLTX | NETIF_F_TSO; if (highmem) dev->features |= NETIF_F_HIGHDMA; - dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; /* read the mac address */ - memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); /* device is off until link detection */ netif_carrier_off(dev); @@ -2454,20 +2628,22 @@ static inline void sky2_show_addr(struct net_device *dev) static int __devinit sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - struct net_device *dev, *dev1; + struct net_device *dev, *dev1 = NULL; struct sky2_hw *hw; int err, using_dac = 0; - if ((err = pci_enable_device(pdev))) { + err = pci_enable_device(pdev); + if (err) { printk(KERN_ERR PFX "%s cannot enable PCI device\n", pci_name(pdev)); goto err_out; } - if ((err = pci_request_regions(pdev, DRV_NAME))) { + err = pci_request_regions(pdev, DRV_NAME); + if (err) { printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", pci_name(pdev)); - goto err_out_disable_pdev; + goto err_out; } pci_set_master(pdev); @@ -2486,7 +2662,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_regions; } } - #ifdef __BIG_ENDIAN /* byte swap decriptors in hardware */ { @@ -2517,26 +2692,21 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_hw; } - err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - goto err_out_iounmap; - } - pci_set_drvdata(pdev, hw); - err = sky2_reset(hw); if (err) - goto err_out_free_irq; + goto err_out_iounmap; - printk(KERN_INFO PFX "addr 0x%lx irq %d chip 0x%x (%s) rev %d\n", + printk(KERN_INFO PFX "addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n", pci_resource_start(pdev, 0), pdev->irq, - hw->chip_id, chip_name(hw->chip_id), hw->chip_rev); + yukon_name[hw->chip_id - CHIP_ID_YUKON], + hw->chip_id, hw->chip_rev); - if ((dev = sky2_init_netdev(hw, 0, using_dac)) == NULL) + dev = sky2_init_netdev(hw, 0, using_dac); + if (!dev) goto err_out_free_pci; - if ((err = register_netdev(dev))) { + err = register_netdev(dev); + if (err) { printk(KERN_ERR PFX "%s: cannot register net device\n", pci_name(pdev)); goto err_out_free_netdev; @@ -2549,20 +2719,37 @@ static int __devinit sky2_probe(struct pci_dev *pdev, sky2_show_addr(dev1); else { /* Failure to register second port need not be fatal */ - printk(KERN_WARNING PFX "register of second port failed\n"); + printk(KERN_WARNING PFX + "register of second port failed\n"); hw->dev[1] = NULL; free_netdev(dev1); } } + err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_unregister; + } + + hw->intr_mask = Y2_IS_BASE; + sky2_write32(hw, B0_IMSK, hw->intr_mask); + + pci_set_drvdata(pdev, hw); + return 0; +err_out_unregister: + if (dev1) { + unregister_netdev(dev1); + free_netdev(dev1); + } + unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); - -err_out_free_irq: - free_irq(pdev->irq, hw); err_out_free_pci: + sky2_write8(hw, B0_CTST, CS_RST_SET); pci_free_consistent(hw->pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); err_out_iounmap: iounmap(hw->regs); @@ -2570,33 +2757,34 @@ err_out_free_hw: kfree(hw); err_out_free_regions: pci_release_regions(pdev); -err_out_disable_pdev: pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); err_out: return err; } static void __devexit sky2_remove(struct pci_dev *pdev) { - struct sky2_hw *hw = pci_get_drvdata(pdev); + struct sky2_hw *hw = pci_get_drvdata(pdev); struct net_device *dev0, *dev1; - if(!hw) + if (!hw) return; - if ((dev1 = hw->dev[1])) - unregister_netdev(dev1); dev0 = hw->dev[0]; + dev1 = hw->dev[1]; + if (dev1) + unregister_netdev(dev1); unregister_netdev(dev0); + sky2_write32(hw, B0_IMSK, 0); sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + sky2_write8(hw, B0_CTST, CS_RST_SET); free_irq(pdev->irq, hw); - pci_free_consistent(pdev, STATUS_LE_BYTES, - hw->st_le, hw->st_dma); + pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); + if (dev1) free_netdev(dev1); free_netdev(dev0); @@ -2608,7 +2796,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev) #ifdef CONFIG_PM static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) { - struct sky2_hw *hw = pci_get_drvdata(pdev); + struct sky2_hw *hw = pci_get_drvdata(pdev); int i, wol = 0; for (i = 0; i < 2; i++) { @@ -2635,7 +2823,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) static int sky2_resume(struct pci_dev *pdev) { - struct sky2_hw *hw = pci_get_drvdata(pdev); + struct sky2_hw *hw = pci_get_drvdata(pdev); int i; pci_set_power_state(pdev, PCI_D0); @@ -2657,19 +2845,18 @@ static int sky2_resume(struct pci_dev *pdev) #endif static struct pci_driver sky2_driver = { - .name = DRV_NAME, - .id_table = sky2_id_table, - .probe = sky2_probe, - .remove = __devexit_p(sky2_remove), + .name = DRV_NAME, + .id_table = sky2_id_table, + .probe = sky2_probe, + .remove = __devexit_p(sky2_remove), #ifdef CONFIG_PM - .suspend = sky2_suspend, - .resume = sky2_resume, + .suspend = sky2_suspend, + .resume = sky2_resume, #endif }; static int __init sky2_init_module(void) { - return pci_module_init(&sky2_driver); } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index d2a0ac2c53e..9256303acf7 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -209,13 +209,9 @@ enum csr_regs { Y2_CFG_SPC = 0x1c00, }; -/* Access pci config through board I/O */ -#define PCI_C(x) (Y2_CFG_SPC + (x)) - - /* B0_CTST 16 bit Control/Status register */ enum { - Y2_VMAIN_AVAIL = 1<<17, /* VMAIN available (YUKON-2 only) */ + Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */ Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */ Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */ Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */ @@ -234,13 +230,17 @@ enum { CS_MRST_SET = 1<<2, /* Set Master reset */ CS_RST_CLR = 1<<1, /* Clear Software reset */ CS_RST_SET = 1, /* Set Software reset */ +}; /* B0_LED 8 Bit LED register */ +enum { /* Bit 7.. 2: reserved */ LED_STAT_ON = 1<<1, /* Status LED on */ - LED_STAT_OFF = 1, /* Status LED off */ + LED_STAT_OFF = 1, /* Status LED off */ +}; /* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +enum { PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */ PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */ PC_VCC_ENA = 1<<5, /* Switch VCC Enable */ @@ -336,7 +336,7 @@ enum { Y2_HWE_L2_MASK = Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2, - Y2_HWE_ALL_MASK = Y2_IS_SENSOR | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | + Y2_HWE_ALL_MASK = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK, }; @@ -793,11 +793,6 @@ enum { STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ STAT_ISR_TIMER_CTRL= 0x0ed8,/* 8 bit ISR Timer Control Reg */ STAT_ISR_TIMER_TEST= 0x0ed9,/* 8 bit ISR Timer Test Reg */ - - ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ - ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ - ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ - ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ }; enum { @@ -836,6 +831,7 @@ enum { /* WOL Pattern Counter Registers (YUKON only) */ + WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */ WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */ }; @@ -1536,34 +1532,34 @@ enum { /* Receive Frame Status Encoding */ enum { GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ - GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */ - GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */ - GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */ - GMR_FS_MC = 1<<10, /* Bit 10: Multicast Packet */ - GMR_FS_BC = 1<<9, /* Bit 9: Broadcast Packet */ - GMR_FS_RX_OK = 1<<8, /* Bit 8: Receive OK (Good Packet) */ - GMR_FS_GOOD_FC = 1<<7, /* Bit 7: Good Flow-Control Packet */ - GMR_FS_BAD_FC = 1<<6, /* Bit 6: Bad Flow-Control Packet */ - GMR_FS_MII_ERR = 1<<5, /* Bit 5: MII Error */ - GMR_FS_LONG_ERR = 1<<4, /* Bit 4: Too Long Packet */ - GMR_FS_FRAGMENT = 1<<3, /* Bit 3: Fragment */ - - GMR_FS_CRC_ERR = 1<<1, /* Bit 1: CRC Error */ - GMR_FS_RX_FF_OV = 1<<0, /* Bit 0: Rx FIFO Overflow */ + GMR_FS_VLAN = 1<<13, /* VLAN Packet */ + GMR_FS_JABBER = 1<<12, /* Jabber Packet */ + GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */ + GMR_FS_MC = 1<<10, /* Multicast Packet */ + GMR_FS_BC = 1<<9, /* Broadcast Packet */ + GMR_FS_RX_OK = 1<<8, /* Receive OK (Good Packet) */ + GMR_FS_GOOD_FC = 1<<7, /* Good Flow-Control Packet */ + GMR_FS_BAD_FC = 1<<6, /* Bad Flow-Control Packet */ + GMR_FS_MII_ERR = 1<<5, /* MII Error */ + GMR_FS_LONG_ERR = 1<<4, /* Too Long Packet */ + GMR_FS_FRAGMENT = 1<<3, /* Fragment */ + + GMR_FS_CRC_ERR = 1<<1, /* CRC Error */ + GMR_FS_RX_FF_OV = 1<<0, /* Rx FIFO Overflow */ -/* - * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) - */ GMR_FS_ANY_ERR = GMR_FS_RX_FF_OV | GMR_FS_CRC_ERR | GMR_FS_FRAGMENT | GMR_FS_LONG_ERR | GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE | GMR_FS_JABBER, -/* Rx GMAC FIFO Flush Mask (default) */ - RX_FF_FL_DEF_MSK = GMR_FS_ANY_ERR, }; /* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ enum { + RX_TRUNC_ON = 1<<27, /* enable packet truncation */ + RX_TRUNC_OFF = 1<<26, /* disable packet truncation */ + RX_VLAN_STRIP_ON = 1<<25, /* enable VLAN stripping */ + RX_VLAN_STRIP_OFF = 1<<24, /* disable VLAN stripping */ + GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */ GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */ GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */ @@ -1574,7 +1570,8 @@ enum { GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */ GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */ GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */ - GMF_CLI_RX_FC = 1<<4, /* Clear IRQ Rx Frame Complete */ + GMF_CLI_RX_C = 1<<4, /* Clear IRQ Rx Frame Complete */ + GMF_OPER_ON = 1<<3, /* Operational Mode On */ GMF_OPER_OFF = 1<<2, /* Operational Mode Off */ GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */ @@ -1586,6 +1583,9 @@ enum { /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { + TX_VLAN_TAG_ON = 1<<25,/* enable VLAN tagging */ + TX_VLAN_TAG_OFF = 1<<24,/* disable VLAN tagging */ + GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ @@ -1679,8 +1679,7 @@ enum { GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ -#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV |\ - GM_IS_TX_FF_UR | GM_IS_RX_FF_OR) +#define GMAC_DEF_MSK (GM_IS_TX_FF_UR|GM_IS_RX_FF_OR) /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ /* Bits 15.. 2: reserved */ @@ -1761,9 +1760,6 @@ enum { OP_RXTIMEVLAN = OP_RXTIMESTAMP | OP_RXVLAN, OP_RSS_HASH = 0x65, OP_TXINDEXLE = 0x68, - -/* YUKON-2 SPECIAL opcodes defines */ - OP_PUTIDX = 0x70, }; /* Yukon 2 hardware interface @@ -1775,62 +1771,60 @@ struct sky2_tx_le { struct { u16 offset; u16 start; - } csum; + } csum __attribute((packed)); struct { u16 size; u16 rsvd; - } tso; + } tso __attribute((packed)); } tx; u16 length; /* also vlan tag or checksum start */ u8 ctrl; u8 opcode; -}; +} __attribute((packed)); struct sky2_rx_le { - union { - u32 addr; - struct { - u16 start1; - u16 start2; - } csum; - } rx; + u32 addr; u16 length; u8 ctrl; u8 opcode; -}; +} __attribute((packed));; struct sky2_status_le { u32 status; /* also checksum */ u16 length; /* also vlan tag */ u8 link; u8 opcode; -}; - +} __attribute((packed)); struct ring_info { struct sk_buff *skb; - DECLARE_PCI_UNMAP_ADDR(mapaddr); - DECLARE_PCI_UNMAP_LEN(maplen); + dma_addr_t mapaddr; + u16 maplen; + u16 idx; }; struct sky2_port { - struct sky2_hw *hw ____cacheline_aligned; + struct sky2_hw *hw; struct net_device *netdev; unsigned port; u32 msg_enable; - struct ring_info *tx_ring ____cacheline_aligned; + struct ring_info *tx_ring; struct sky2_tx_le *tx_le; spinlock_t tx_lock; + u32 tx_addr64; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ + u16 tx_pending; u16 tx_last_put; + u16 tx_last_mss; - struct ring_info *rx_ring ____cacheline_aligned; + struct ring_info *rx_ring; struct sky2_rx_le *rx_le; - u16 rx_ring_size; + u32 rx_addr64; u16 rx_next; /* next re to check */ u16 rx_put; /* next le index to use */ + u16 rx_pending; u16 rx_last_put; dma_addr_t rx_le_map; @@ -1882,12 +1876,14 @@ static inline u8 sky2_read8(const struct sky2_hw *hw, unsigned reg) return readb(hw->regs + reg); } +/* This should probably go away, bus based tweeks suck */ static inline int is_pciex(const struct sky2_hw *hw) { - return (sky2_read32(hw, PCI_C(PCI_DEV_STATUS)) & PCI_OS_PCI_X) == 0; + u32 status; + pci_read_config_dword(hw->pdev, PCI_DEV_STATUS, &status); + return (status & PCI_OS_PCI_X) == 0; } - static inline void sky2_write32(const struct sky2_hw *hw, unsigned reg, u32 val) { writel(val, hw->regs + reg); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 7c717907896..5e90557715a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -780,11 +780,15 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits) } /* Schedule rx intr now? */ +static inline int netif_rx_schedule_test(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); +} +/* Schedule only if device is up */ static inline int netif_rx_schedule_prep(struct net_device *dev) { - return netif_running(dev) && - !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); + return netif_running(dev) && netif_rx_schedule_test(dev); } /* Add interface to tail of rx poll list. This assumes that _prep has -- cgit v1.2.3-70-g09d2 From 79e57d32fe6d2d5bd38378f6dccfdbe6bd1d1dab Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 19 Sep 2005 15:42:33 -0700 Subject: [PATCH] sky2: fix FIFO DMA alignment problems The Yukon2 chip FIFO has a problem recovering from a pause frame if the receive buffer is not aligned. The workaround is to just leave receive buffer at original alignment, which will make IP header unaligned. Rework receive logic for clarity. Need to ignore receive overrun interrupts (or mac hangs). These fixes make the sky2 driver generally usable. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 78 ++++++++++++++++++++++++++++-------------------------- drivers/net/sky2.h | 2 +- 2 files changed, 41 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index bc95aacab20..c057694cf04 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -76,7 +76,7 @@ #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) #define RX_MAX_PENDING (RX_LE_SIZE/2 - 1) #define RX_DEF_PENDING 128 -#define RX_COPY_THRESHOLD 128 +#define RX_COPY_THRESHOLD 256 #define TX_RING_SIZE 512 #define TX_DEF_PENDING (TX_RING_SIZE - 1) @@ -692,18 +692,10 @@ static void sky2_rx_clean(struct sky2_port *sky2) } } -static inline struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, - unsigned int size, - unsigned int gfp_mask) +#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) +static inline unsigned sky2_rx_size(const struct sky2_port *sky2) { - struct sk_buff *skb; - - skb = alloc_skb(size + NET_IP_ALIGN, gfp_mask); - if (likely(skb)) { - skb->dev = sky2->netdev; - skb_reserve(skb, NET_IP_ALIGN); - } - return skb; + return roundup(sky2->netdev->mtu + ETH_HLEN + 4, 8); } /* @@ -711,22 +703,28 @@ static inline struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2, * In case of 64 bit dma, there are 2X as many list elements * available as ring entries * and need to reserve one list element so we don't wrap around. + * + * It appears the hardware has a bug in the FIFO logic that + * cause it to hang if the FIFO gets overrun and the receive buffer + * is not aligned. This means we can't use skb_reserve to align + * the IP header. */ static int sky2_rx_fill(struct sky2_port *sky2) { unsigned i; - const unsigned rx_buf_size = sky2->netdev->mtu + ETH_HLEN + 8; + unsigned size = sky2_rx_size(sky2); + pr_debug("rx_fill size=%d\n", size); for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; - re->skb = sky2_rx_alloc(sky2, rx_buf_size, GFP_KERNEL); + re->skb = dev_alloc_skb(size); if (!re->skb) goto nomem; re->mapaddr = pci_map_single(sky2->hw->pdev, re->skb->data, - rx_buf_size, PCI_DMA_FROMDEVICE); - re->maplen = rx_buf_size; + size, PCI_DMA_FROMDEVICE); + re->maplen = size; sky2_rx_add(sky2, re); } @@ -1408,8 +1406,8 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, struct net_device *dev = hw->dev[port]; struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; - struct sk_buff *skb, *nskb; - const unsigned int rx_buf_size = dev->mtu + ETH_HLEN + 8; + struct sk_buff *skb = NULL; + const unsigned int bufsize = sky2_rx_size(sky2); if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", @@ -1417,43 +1415,49 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; - skb = NULL; if (!(status & GMR_FS_RX_OK) || (status & GMR_FS_ANY_ERR) || (length << 16) != (status & GMR_FS_LEN) - || length > rx_buf_size) + || length > bufsize) goto error; if (length < RX_COPY_THRESHOLD) { - nskb = sky2_rx_alloc(sky2, length, GFP_ATOMIC); - if (!nskb) + skb = alloc_skb(length + 2, GFP_ATOMIC); + if (!skb) goto resubmit; + skb_reserve(skb, 2); pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, length, PCI_DMA_FROMDEVICE); - memcpy(nskb->data, re->skb->data, length); + memcpy(skb->data, re->skb->data, length); pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, length, PCI_DMA_FROMDEVICE); - skb = nskb; } else { - nskb = sky2_rx_alloc(sky2, rx_buf_size, GFP_ATOMIC); + struct sk_buff *nskb; + + nskb = dev_alloc_skb(bufsize); if (!nskb) goto resubmit; skb = re->skb; + re->skb = nskb; pci_unmap_single(sky2->hw->pdev, re->mapaddr, re->maplen, PCI_DMA_FROMDEVICE); prefetch(skb->data); - re->skb = nskb; re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - rx_buf_size, PCI_DMA_FROMDEVICE); - re->maplen = rx_buf_size; + bufsize, PCI_DMA_FROMDEVICE); + re->maplen = bufsize; } + skb->dev = dev; + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + resubmit: - BUG_ON(re->skb == skb); sky2_rx_add(sky2, re); + return skb; error: @@ -1472,6 +1476,7 @@ error: sky2->net_stats.rx_crc_errors++; if (status & GMR_FS_RX_FF_OV) sky2->net_stats.rx_fifo_errors++; + goto resubmit; } @@ -1502,6 +1507,7 @@ static int sky2_poll(struct net_device *dev, int *budget) unsigned int csum[2]; hwidx = sky2_read16(hw, STAT_PUT_IDX); + BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); while (hw->st_idx != hwidx && work_done < to_do) { struct sky2_status_le *le = hw->st_le + hw->st_idx; @@ -1520,22 +1526,18 @@ static int sky2_poll(struct net_device *dev, int *budget) case OP_RXSTAT: skb = sky2_receive(hw, port, length, status); if (likely(skb)) { - __skb_put(skb, length); - skb->protocol = eth_type_trans(skb, dev); - /* Add hw checksum if available */ skb->ip_summed = summed[port]; skb->csum = csum[port]; - /* Clear for next packet */ - csum[port] = 0; - summed[port] = CHECKSUM_NONE; - netif_receive_skb(skb); - - dev->last_rx = jiffies; ++work_done; } + + /* Clear for next packet */ + csum[port] = 0; + summed[port] = CHECKSUM_NONE; + break; case OP_RXCHKS: diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 9256303acf7..1a8a004e106 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1679,7 +1679,7 @@ enum { GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ -#define GMAC_DEF_MSK (GM_IS_TX_FF_UR|GM_IS_RX_FF_OR) +#define GMAC_DEF_MSK GM_IS_TX_FF_UR /* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ /* Bits 15.. 2: reserved */ -- cgit v1.2.3-70-g09d2 From 6e4cbb34d4cabec48f25f0bbad68935221bd457b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 19 Sep 2005 15:47:57 -0700 Subject: [PATCH] sky2: allow ethtool debug access to all of PCI space For debugging, it is useful to allow ethtool to dump all of the PCI mapped space. There is one small set of registers for RAM diagnostics that needs to be avoided to prevent hanging, but all the rest is accessible. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c057694cf04..1acca982ac1 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2488,33 +2488,30 @@ static int sky2_set_ringparam(struct net_device *dev, return err; } -#define SKY2_REGS_LEN 0x1000 static int sky2_get_regs_len(struct net_device *dev) { - return SKY2_REGS_LEN; + return 0x4000; } /* * Returns copy of control register region - * I/O region is divided into banks and certain regions are unreadable + * Note: access to the RAM address register set will cause timeouts. */ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) { const struct sky2_port *sky2 = netdev_priv(dev); - unsigned long offs; const void __iomem *io = sky2->hw->regs; - static const unsigned long bankmap = 0xfff3f305; + BUG_ON(regs->len < B3_RI_WTO_R1); regs->version = 1; - for (offs = 0; offs < regs->len; offs += 128) { - u32 len = min_t(u32, 128, regs->len - offs); + memset(p, 0, regs->len); - if (bankmap & (1 << (offs / 128))) - memcpy_fromio(p + offs, io + offs, len); - else - memset(p + offs, 0, len); - } + memcpy_fromio(p, io, B3_RAM_ADDR); + + memcpy_fromio(p + B3_RI_WTO_R1, + io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); } static struct ethtool_ops sky2_ethtool_ops = { -- cgit v1.2.3-70-g09d2 From ecfd7f32aa9e279f3732c2e5049b1a4a13428572 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 19 Sep 2005 15:49:13 -0700 Subject: [PATCH] sky2: version 0.5 Bump version (we are half way to a stable driver??) Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1acca982ac1..d2c0d04be72 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -54,7 +54,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.4" +#define DRV_VERSION "0.5" #define PFX DRV_NAME " " /* -- cgit v1.2.3-70-g09d2 From 6b1a3aefd897fd9be410d192f950656ef2b59694 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Tue, 27 Sep 2005 15:02:55 -0700 Subject: [PATCH] sky2: changing mtu doesn't have to reset link Changing the MTU of the network device doesn't mean the whole link has to be brought down and back up again. Just stopping the receive engine is good enough. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 147 ++++++++++++++++++++++++++++++----------------------- 1 file changed, 84 insertions(+), 63 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d2c0d04be72..0cc57293faf 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -468,9 +468,9 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* serial mode register */ reg = DATA_BLIND_VAL(DATA_BLIND_DEF) | - GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); - if (hw->dev[port]->mtu > 1500) + if (hw->dev[port]->mtu > ETH_DATA_LEN) reg |= GM_SMOD_JUMBO_ENA; gma_write16(hw, port, GM_SERIAL_MODE, reg); @@ -515,8 +515,6 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) len /= 8; end = start + len - 1; - pr_debug("sky2_ramset start=%d end=%d\n", start, end); - sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); sky2_write32(hw, RB_ADDR(q, RB_START), start); sky2_write32(hw, RB_ADDR(q, RB_END), end); @@ -528,7 +526,6 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) rxlo = len/2; rxup = rxlo + len/4; - pr_debug(" utpp=%d ltpp=%d\n", rxup, rxlo); /* Set thresholds on receive queue's */ sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), rxup); @@ -662,16 +659,44 @@ static void rx_set_checksum(struct sky2_port *sky2) le->ctrl = 0; le->opcode = OP_TCPSTART | HW_OWNER; - sky2_write16(sky2->hw, Y2_QADDR(rxqaddr[sky2->port], - PREF_UNIT_PUT_IDX), sky2->rx_put); - sky2_read16(sky2->hw, Y2_QADDR(rxqaddr[sky2->port], PREF_UNIT_PUT_IDX)); - mdelay(1); sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } +/* + * The RX Stop command will not work for Yukon-2 if the BMU does not + * reach the end of packet and since we can't make sure that we have + * incoming data, we must reset the BMU while it is not doing a DMA + * transfer. Since it is possible that the RX path is still active, + * the RX RAM buffer will be stopped first, so any possible incoming + * data will not trigger a DMA. After the RAM buffer is stopped, the + * BMU is polled until any DMA in progress is ended and only then it + * will be reset. + */ +static void sky2_rx_stop(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned rxq = rxqaddr[sky2->port]; + int i; + + /* disable the RAM Buffer receive queue */ + sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD); + + for (i = 0; i < 0xffff; i++) + if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL)) + == sky2_read8(hw, RB_ADDR(rxq, Q_RL))) + goto stopped; + + printk(KERN_WARNING PFX "%s: receiver stop failed\n", + sky2->netdev->name); +stopped: + sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST); + + /* reset the Rx prefetch unit */ + sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); +} /* Cleanout receive buffer area, assumes receiver hardware stopped */ static void sky2_rx_clean(struct sky2_port *sky2) @@ -693,7 +718,7 @@ static void sky2_rx_clean(struct sky2_port *sky2) } #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) -static inline unsigned sky2_rx_size(const struct sky2_port *sky2) +static inline unsigned rx_size(const struct sky2_port *sky2) { return roundup(sky2->netdev->mtu + ETH_HLEN + 4, 8); } @@ -709,12 +734,18 @@ static inline unsigned sky2_rx_size(const struct sky2_port *sky2) * is not aligned. This means we can't use skb_reserve to align * the IP header. */ -static int sky2_rx_fill(struct sky2_port *sky2) +static int sky2_rx_start(struct sky2_port *sky2) { - unsigned i; - unsigned size = sky2_rx_size(sky2); + struct sky2_hw *hw = sky2->hw; + unsigned size = rx_size(sky2); + unsigned rxq = rxqaddr[sky2->port]; + int i; + + sky2->rx_put = sky2->rx_next = 0; + sky2_qset(hw, rxq, is_pciex(hw) ? 0x80 : 0x600); + sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); - pr_debug("rx_fill size=%d\n", size); + rx_set_checksum(sky2); for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; @@ -722,12 +753,15 @@ static int sky2_rx_fill(struct sky2_port *sky2) if (!re->skb) goto nomem; - re->mapaddr = pci_map_single(sky2->hw->pdev, re->skb->data, + re->mapaddr = pci_map_single(hw->pdev, re->skb->data, size, PCI_DMA_FROMDEVICE); re->maplen = size; sky2_rx_add(sky2, re); } + /* Tell chip about available buffers */ + sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); + sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX)); return 0; nomem: sky2_rx_clean(sky2); @@ -792,28 +826,14 @@ static int sky2_up(struct net_device *dev) sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), RB_RST_SET); - sky2_qset(hw, rxqaddr[port], is_pciex(hw) ? 0x80 : 0x600); sky2_qset(hw, txqaddr[port], 0x600); + sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, + TX_RING_SIZE - 1); - sky2->rx_put = sky2->rx_next = 0; - sky2_prefetch_init(hw, rxqaddr[port], sky2->rx_le_map, RX_LE_SIZE - 1); - - rx_set_checksum(sky2); - - err = sky2_rx_fill(sky2); + err = sky2_rx_start(sky2); if (err) goto err_out; - /* Give buffers to receiver */ - sky2_write16(sky2->hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX), - sky2->rx_put); - sky2->rx_last_put = sky2_read16(sky2->hw, - Y2_QADDR(rxqaddr[port], - PREF_UNIT_PUT_IDX)); - - sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, - TX_RING_SIZE - 1); - /* Enable interrupts from phy/mac for port */ hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2; sky2_write32(hw, B0_IMSK, hw->intr_mask); @@ -1076,7 +1096,6 @@ static int sky2_down(struct net_device *dev) struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; u16 ctrl; - int i; if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); @@ -1121,30 +1140,7 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); - /* - * The RX Stop command will not work for Yukon-2 if the BMU does not - * reach the end of packet and since we can't make sure that we have - * incoming data, we must reset the BMU while it is not doing a DMA - * transfer. Since it is possible that the RX path is still active, - * the RX RAM buffer will be stopped first, so any possible incoming - * data will not trigger a DMA. After the RAM buffer is stopped, the - * BMU is polled until any DMA in progress is ended and only then it - * will be reset. - */ - - /* disable the RAM Buffer receive queue */ - sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_DIS_OP_MD); - - for (i = 0; i < 0xffff; i++) - if (sky2_read8(hw, RB_ADDR(rxqaddr[port], Q_RSL)) - == sky2_read8(hw, RB_ADDR(rxqaddr[port], Q_RL))) - break; - - sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), - BMU_RST_SET | BMU_FIFO_RST); - /* reset the Rx prefetch unit */ - sky2_write32(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_CTRL), - PREF_UNIT_RST_SET); + sky2_rx_stop(sky2); sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); @@ -1379,19 +1375,44 @@ static void sky2_tx_timeout(struct net_device *dev) static int sky2_change_mtu(struct net_device *dev, int new_mtu) { - int err = 0; + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + int err; + u16 ctl, mode; if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - if (netif_running(dev)) - sky2_down(dev); + if (!netif_running(dev)) { + dev->mtu = new_mtu; + return 0; + } + + local_irq_disable(); + sky2_write32(hw, B0_IMSK, 0); + + ctl = gma_read16(hw, sky2->port, GM_GP_CTRL); + gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); + sky2_rx_stop(sky2); + sky2_rx_clean(sky2); dev->mtu = new_mtu; + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | + GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); - if (netif_running(dev)) - err = sky2_up(dev); + if (dev->mtu > ETH_DATA_LEN) + mode |= GM_SMOD_JUMBO_ENA; + + gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode); + + sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD); + + err = sky2_rx_start(sky2); + gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + sky2_read32(hw, B0_IMSK); + local_irq_enable(); return err; } @@ -1407,7 +1428,7 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; - const unsigned int bufsize = sky2_rx_size(sky2); + const unsigned int bufsize = rx_size(sky2); if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", -- cgit v1.2.3-70-g09d2 From d11c13e752c4e34777d33579ee0378e0178ef52d Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Tue, 27 Sep 2005 15:02:56 -0700 Subject: [PATCH] sky2: cleanup interrupt processing The receive processing can be cleaned up by not using local variables to store checksum status, instead just put it directly onto the expected skb. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 65 +++++++++++++++++++++++------------------------------- 1 file changed, 28 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0cc57293faf..8527a49e3ff 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1040,13 +1040,14 @@ out_unlock: * NB: the hardware will tell us about partial completion of multi-part * buffers; these are defered until completion. */ -static void sky2_tx_complete(struct net_device *dev, u16 done) +static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { - struct sky2_port *sky2 = netdev_priv(dev); + struct net_device *dev = sky2->netdev; unsigned i; - if (netif_msg_tx_done(sky2)) - printk(KERN_DEBUG "%s: tx done, upto %u\n", dev->name, done); + if (unlikely(netif_msg_tx_done(sky2))) + printk(KERN_DEBUG "%s: tx done, upto %u\n", + dev->name, done); spin_lock(&sky2->tx_lock); @@ -1086,7 +1087,7 @@ out: /* Cleanup all untransmitted buffers, assume transmitter not running */ static inline void sky2_tx_clean(struct sky2_port *sky2) { - sky2_tx_complete(sky2->netdev, sky2->tx_prod); + sky2_tx_complete(sky2, sky2->tx_prod); } /* Network shutdown */ @@ -1421,18 +1422,17 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) * For small packets or errors, just reuse existing skb. * For larger pakects, get new buffer. */ -static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, +static struct sk_buff *sky2_receive(struct sky2_port *sky2, u16 length, u32 status) { - struct net_device *dev = hw->dev[port]; - struct sky2_port *sky2 = netdev_priv(dev); struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; + struct net_device *dev; const unsigned int bufsize = rx_size(sky2); if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", - dev->name, sky2->rx_next, status, length); + sky2->netdev->name, sky2->rx_next, status, length); sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; @@ -1451,6 +1451,8 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, length, PCI_DMA_FROMDEVICE); memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, length, PCI_DMA_FROMDEVICE); } else { @@ -1471,12 +1473,14 @@ static struct sk_buff *sky2_receive(struct sky2_hw *hw, unsigned port, re->maplen = bufsize; } - skb->dev = dev; skb_put(skb, length); + dev = sky2->netdev; + skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; resubmit: + re->skb->ip_summed = CHECKSUM_NONE; sky2_rx_add(sky2, re); return skb; @@ -1517,59 +1521,46 @@ static inline u16 tx_index(u8 port, u32 status, u16 len) * Both ports share the same status interrupt, therefore there is only * one poll routine. */ -static int sky2_poll(struct net_device *dev, int *budget) +static int sky2_poll(struct net_device *dev0, int *budget) { - struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - unsigned int to_do = min(dev->quota, *budget); + struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw; + unsigned int to_do = min(dev0->quota, *budget); unsigned int work_done = 0; u16 hwidx; - unsigned char summed[2] = { CHECKSUM_NONE, CHECKSUM_NONE }; - unsigned int csum[2]; hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); while (hw->st_idx != hwidx && work_done < to_do) { struct sky2_status_le *le = hw->st_le + hw->st_idx; + struct sky2_port *sky2; struct sk_buff *skb; - u8 port; u32 status; u16 length; + BUG_ON(le->link >= hw->ports); + sky2 = netdev_priv(hw->dev[le->link]); status = le32_to_cpu(le->status); length = le16_to_cpu(le->length); - port = le->link; - - BUG_ON(port >= hw->ports || hw->dev[port] == NULL); switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: - skb = sky2_receive(hw, port, length, status); + skb = sky2_receive(sky2, length, status); if (likely(skb)) { - /* Add hw checksum if available */ - skb->ip_summed = summed[port]; - skb->csum = csum[port]; - netif_receive_skb(skb); ++work_done; } - - /* Clear for next packet */ - csum[port] = 0; - summed[port] = CHECKSUM_NONE; - break; case OP_RXCHKS: - /* Save computed checksum for next rx */ - csum[port] = le16_to_cpu(status & 0xffff); - summed[port] = CHECKSUM_HW; + skb = sky2->rx_ring[sky2->rx_next].skb; + skb->ip_summed = CHECKSUM_HW; + skb->csum = le16_to_cpu(status); break; case OP_TXINDEXLE: - sky2_tx_complete(hw->dev[port], - tx_index(port, status, length)); + sky2_tx_complete(sky2, + tx_index(sky2->port, status, length)); break; case OP_RXTIMESTAMP: @@ -1599,7 +1590,7 @@ static int sky2_poll(struct net_device *dev, int *budget) rx_set_put(hw->dev[1]); *budget -= work_done; - dev->quota -= work_done; + dev0->quota -= work_done; if (work_done < to_do) { /* * Another chip workaround, need to restart TX timer if status @@ -1613,7 +1604,7 @@ static int sky2_poll(struct net_device *dev, int *budget) hw->intr_mask |= Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); sky2_read32(hw, B0_IMSK); - netif_rx_complete(dev); + netif_rx_complete(dev0); } return work_done >= to_do; -- cgit v1.2.3-70-g09d2 From d1f1370863f7fa3d76dc7d7779debdda854a5a60 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Tue, 27 Sep 2005 15:02:57 -0700 Subject: [PATCH] sky2: add hardware VLAN acceleration support Use the hardware to do VLAN. Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 101 +++++++++++++++++++++++++++++++++++++++++++++-------- drivers/net/sky2.h | 6 ++++ 2 files changed, 93 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8527a49e3ff..6d9c1db8896 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -26,7 +26,6 @@ /* * TODO * - coalescing setting? - * - vlan support * * TOTEST * - variable ring size @@ -48,9 +47,14 @@ #include #include #include +#include #include +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +#define SKY2_VLAN_TAG_USED 1 +#endif + #include "sky2.h" #define DRV_NAME "sky2" @@ -489,7 +493,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Configure Rx MAC FIFO */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), - GMF_OPER_ON | GMF_RX_F_FL_ON); + GMF_RX_CTRL_DEF); /* Flush Rx MAC FIFO on any flowcontrol or error */ reg = GMR_FS_ANY_ERR; @@ -717,6 +721,41 @@ static void sky2_rx_clean(struct sky2_port *sky2) } } +#ifdef SKY2_VLAN_TAG_USED +static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + unsigned long flags; + + spin_lock_irqsave(&sky2->tx_lock, flags); + + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); + sky2->vlgrp = grp; + + spin_unlock_irqrestore(&sky2->tx_lock, flags); +} + +static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + unsigned long flags; + + spin_lock_irqsave(&sky2->tx_lock, flags); + + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); + if (sky2->vlgrp) + sky2->vlgrp->vlan_devices[vid] = NULL; + + spin_unlock_irqrestore(&sky2->tx_lock, flags); +} +#endif + #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) static inline unsigned rx_size(const struct sky2_port *sky2) { @@ -894,7 +933,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; - struct sky2_tx_le *le; + struct sky2_tx_le *le = NULL; struct ring_info *re; unsigned long flags; unsigned i, len; @@ -961,8 +1000,23 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) sky2->tx_last_mss = mss; } - /* Handle TCP checksum offload */ ctrl = 0; +#ifdef SKY2_VLAN_TAG_USED + /* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */ + if (sky2->vlgrp && vlan_tx_tag_present(skb)) { + if (!le) { + le = get_tx_le(sky2); + le->tx.addr = 0; + le->opcode = OP_VLAN|HW_OWNER; + le->ctrl = 0; + } else + le->opcode |= OP_VLAN; + le->length = cpu_to_be16(vlan_tx_tag_get(skb)); + ctrl |= INS_VLAN; + } +#endif + + /* Handle TCP checksum offload */ if (skb->ip_summed == CHECKSUM_HW) { u16 hdr = skb->h.raw - skb->data; u16 offset = hdr + skb->csum; @@ -1436,10 +1490,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; - if (!(status & GMR_FS_RX_OK) - || (status & GMR_FS_ANY_ERR) - || (length << 16) != (status & GMR_FS_LEN) - || length > bufsize) + if (!(status & GMR_FS_RX_OK) || (status & GMR_FS_ANY_ERR)) goto error; if (length < RX_COPY_THRESHOLD) { @@ -1539,6 +1590,9 @@ static int sky2_poll(struct net_device *dev0, int *budget) u16 length; BUG_ON(le->link >= hw->ports); + if (!hw->dev[le->link]) + goto skip; + sky2 = netdev_priv(hw->dev[le->link]); status = le32_to_cpu(le->status); length = le16_to_cpu(le->length); @@ -1546,12 +1600,27 @@ static int sky2_poll(struct net_device *dev0, int *budget) switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: skb = sky2_receive(sky2, length, status); - if (likely(skb)) { + if (!skb) + break; +#ifdef SKY2_VLAN_TAG_USED + if (sky2->vlgrp && (status & GMR_FS_VLAN)) { + vlan_hwaccel_receive_skb(skb, + sky2->vlgrp, + be16_to_cpu(sky2->rx_tag)); + } else +#endif netif_receive_skb(skb); - ++work_done; - } break; +#ifdef SKY2_VLAN_TAG_USED + case OP_RXVLAN: + sky2->rx_tag = length; + break; + + case OP_RXCHKSVLAN: + sky2->rx_tag = length; + /* fall through */ +#endif case OP_RXCHKS: skb = sky2->rx_ring[sky2->rx_next].skb; skb->ip_summed = CHECKSUM_HW; @@ -1563,9 +1632,6 @@ static int sky2_poll(struct net_device *dev0, int *budget) tx_index(sky2->port, status, length)); break; - case OP_RXTIMESTAMP: - break; - default: if (net_ratelimit()) printk(KERN_WARNING PFX @@ -1574,6 +1640,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) break; } + skip: hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; if (hw->st_idx == hwidx) { hwidx = sky2_read16(hw, STAT_PUT_IDX); @@ -2615,6 +2682,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; +#ifdef SKY2_VLAN_TAG_USED + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = sky2_vlan_rx_register; + dev->vlan_rx_kill_vid = sky2_vlan_rx_kill_vid; +#endif + /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 1a8a004e106..ac91d91f130 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1578,6 +1578,8 @@ enum { GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */ RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */ + + GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON, }; @@ -1826,6 +1828,10 @@ struct sky2_port { u16 rx_put; /* next le index to use */ u16 rx_pending; u16 rx_last_put; +#ifdef SKY2_VLAN_TAG_USED + u16 rx_tag; + struct vlan_group *vlgrp; +#endif dma_addr_t rx_le_map; dma_addr_t tx_le_map; -- cgit v1.2.3-70-g09d2 From 5afa0a9cfb79556f45c02957e71a2ac48a5bb6a1 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Tue, 27 Sep 2005 15:03:00 -0700 Subject: [PATCH] sky2: explicit set power state Add better power management, and power down the chip on device removal Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 156 +++++++++++++++++++++++++++++++++++++---------------- drivers/net/sky2.h | 1 + 2 files changed, 112 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6d9c1db8896..1d00cdcdaa6 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -175,6 +175,91 @@ ready: return gma_read16(hw, port, GM_SMI_DATA); } +static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) +{ + u16 power_control; + u32 reg1; + int vaux; + int ret = 0; + + pr_debug("sky2_set_power_state %d\n", state); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + + pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control); + vaux = (sky2_read8(hw, B0_CTST) & Y2_VAUX_AVAIL) && + (power_control & PCI_PM_CAP_PME_D3cold); + + pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control); + + power_control |= PCI_PM_CTRL_PME_STATUS; + power_control &= ~(PCI_PM_CTRL_STATE_MASK); + + switch (state) { + case PCI_D0: + /* switch power to VCC (WA for VAUX problem) */ + sky2_write8(hw, B0_POWER_CTRL, + PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + + /* disable Core Clock Division, */ + sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + /* enable bits are inverted */ + sky2_write8(hw, B2_Y2_CLK_GATE, + Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); + else + sky2_write8(hw, B2_Y2_CLK_GATE, 0); + + /* Turn off phy power saving */ + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + + /* looks like this xl is back asswards .. */ + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { + reg1 |= PCI_Y2_PHY1_COMA; + if (hw->ports > 1) + reg1 |= PCI_Y2_PHY2_COMA; + } + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + break; + + case PCI_D3hot: + case PCI_D3cold: + /* Turn on phy power saving */ + pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + else + reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); + pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1); + + if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) + sky2_write8(hw, B2_Y2_CLK_GATE, 0); + else + /* enable bits are inverted */ + sky2_write8(hw, B2_Y2_CLK_GATE, + Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | + Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | + Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); + + /* switch power to VAUX */ + if (vaux && state != PCI_D3cold) + sky2_write8(hw, B0_POWER_CTRL, + (PC_VAUX_ENA | PC_VCC_ENA | + PC_VAUX_ON | PC_VCC_OFF)); + break; + default: + printk(KERN_ERR PFX "Unknown power state %d\n", state); + ret = -1; + } + + pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + return ret; +} + static void sky2_phy_reset(struct sky2_hw *hw, unsigned port) { u16 reg; @@ -1869,7 +1954,7 @@ static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) static int sky2_reset(struct sky2_hw *hw) { - u32 ctst, power; + u32 ctst; u16 status; u8 t8, pmd_type; int i; @@ -1927,33 +2012,7 @@ static int sky2_reset(struct sky2_hw *hw) } hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; - /* switch power to VCC (WA for VAUX problem) */ - sky2_write8(hw, B0_POWER_CTRL, - PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); - - /* disable Core Clock Division, */ - sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS); - - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) - /* enable bits are inverted */ - sky2_write8(hw, B2_Y2_CLK_GATE, - Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS | - Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS | - Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS); - else - sky2_write8(hw, B2_Y2_CLK_GATE, 0); - - /* Turn off phy power saving */ - pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &power); - power &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - - /* looks like this xl is back asswards .. */ - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { - power |= PCI_Y2_PHY1_COMA; - if (hw->ports > 1) - power |= PCI_Y2_PHY2_COMA; - } - pci_write_config_dword(hw->pdev, PCI_DEV_REG1, power); + sky2_set_power_state(hw, PCI_D0); for (i = 0; i < hw->ports; i++) { sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); @@ -2714,7 +2773,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, { struct net_device *dev, *dev1 = NULL; struct sky2_hw *hw; - int err, using_dac = 0; + int err, pm_cap, using_dac = 0; err = pci_enable_device(pdev); if (err) { @@ -2732,6 +2791,15 @@ static int __devinit sky2_probe(struct pci_dev *pdev, pci_set_master(pdev); + /* Find power-management capability. */ + pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pm_cap == 0) { + printk(KERN_ERR PFX "Cannot find PowerManagement capability, " + "aborting.\n"); + err = -EIO; + goto err_out_free_regions; + } + if (sizeof(dma_addr_t) > sizeof(u32)) { err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); if (!err) @@ -2775,6 +2843,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, pci_name(pdev)); goto err_out_free_hw; } + hw->pm_cap = pm_cap; err = sky2_reset(hw); if (err) @@ -2861,8 +2930,10 @@ static void __devexit sky2_remove(struct pci_dev *pdev) unregister_netdev(dev0); sky2_write32(hw, B0_IMSK, 0); + sky2_set_power_state(hw, PCI_D3hot); sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); sky2_write8(hw, B0_CTST, CS_RST_SET); + sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); @@ -2874,6 +2945,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev) free_netdev(dev0); iounmap(hw->regs); kfree(hw); + pci_set_drvdata(pdev, NULL); } @@ -2881,28 +2953,21 @@ static void __devexit sky2_remove(struct pci_dev *pdev) static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) { struct sky2_hw *hw = pci_get_drvdata(pdev); - int i, wol = 0; + int i; for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { - struct sky2_port *sky2 = netdev_priv(dev); - if (netif_running(dev)) { - netif_carrier_off(dev); - sky2_down(dev); - } + if (!netif_running(dev)) + continue; + + sky2_down(dev); netif_device_detach(dev); - wol |= sky2->wol; } } - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - - return 0; + return sky2_set_power_state(hw, pci_choose_state(pdev, state)); } static int sky2_resume(struct pci_dev *pdev) @@ -2910,18 +2975,19 @@ static int sky2_resume(struct pci_dev *pdev) struct sky2_hw *hw = pci_get_drvdata(pdev); int i; - pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_enable_wake(pdev, PCI_D0, 0); + sky2_set_power_state(hw, PCI_D0); sky2_reset(hw); for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { - netif_device_attach(dev); - if (netif_running(dev)) + if (netif_running(dev)) { + netif_device_attach(dev); sky2_up(dev); + } } } return 0; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index ac91d91f130..b1acdc606f3 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1854,6 +1854,7 @@ struct sky2_hw { u32 intr_mask; struct net_device *dev[2]; + int pm_cap; u8 chip_id; u8 chip_rev; u8 copper; -- cgit v1.2.3-70-g09d2 From 724bca3ca4d2126b67dd62e64d3f97805f9672de Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Tue, 27 Sep 2005 15:03:01 -0700 Subject: [PATCH] sky2: version 0.6 Verion number change, comment update and one simple optimization Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1d00cdcdaa6..a6c7bb9cea0 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -28,10 +28,8 @@ * - coalescing setting? * * TOTEST - * - variable ring size * - speed setting - * - power management - * - netpoll + * - suspend/resume */ #include @@ -58,7 +56,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.5" +#define DRV_VERSION "0.6" #define PFX DRV_NAME " " /* @@ -1159,7 +1157,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) re->idx = sky2->tx_prod; le->ctrl |= EOP; - sky2_put_idx(sky2->hw, txqaddr[sky2->port], sky2->tx_prod, + sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod, &sky2->tx_last_put, TX_RING_SIZE); if (tx_avail(sky2) < MAX_SKB_TX_LE + 1) -- cgit v1.2.3-70-g09d2 From 9a7ae0a978263adb7d6b630f0c3c37c0133325e0 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 27 Sep 2005 15:28:42 -0700 Subject: [PATCH] sky2: nway reset (BONUS FEATURE) Here is support for ethtool controlled renegotiation. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a6c7bb9cea0..57583fa86a9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2300,6 +2300,24 @@ static u32 sky2_get_msglevel(struct net_device *netdev) return sky2->msg_enable; } +static int sky2_nway_reset(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + if (sky2->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + netif_stop_queue(dev); + + spin_lock_irq(&hw->phy_lock); + sky2_phy_reset(hw, sky2->port); + sky2_phy_init(hw, sky2->port); + spin_unlock_irq(&hw->phy_lock); + + return 0; +} + static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count) { struct sky2_hw *hw = sky2->hw; @@ -2656,6 +2674,7 @@ static struct ethtool_ops sky2_ethtool_ops = { .get_drvinfo = sky2_get_drvinfo, .get_msglevel = sky2_get_msglevel, .set_msglevel = sky2_set_msglevel, + .nway_reset = sky2_nway_reset, .get_regs_len = sky2_get_regs_len, .get_regs = sky2_get_regs, .get_link = ethtool_op_get_link, -- cgit v1.2.3-70-g09d2 From 2995bfb7855aabd493f840af361f3dd7d221caea Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 28 Sep 2005 10:01:03 -0700 Subject: [PATCH] sky2: add permanent address support. Add permanent address support Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 57583fa86a9..06beb71cb3c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2698,6 +2698,7 @@ static struct ethtool_ops sky2_ethtool_ops = { .phys_id = sky2_phys_id, .get_stats_count = sky2_get_stats_count, .get_ethtool_stats = sky2_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; /* Initialize network device */ @@ -2766,6 +2767,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, /* read the mac address */ memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); /* device is off until link detection */ netif_carrier_off(dev); -- cgit v1.2.3-70-g09d2 From 488f84fd901cd3386f5723a3573ea2e1f55af537 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 26 Oct 2005 12:16:07 -0700 Subject: [PATCH] sky2: remove unused definitions The sky2 driver has a lot of register definitions, that were copied over from the skge driver, for areas that don't exist on the Yukon2. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.h | 36 ++++-------------------------------- 1 file changed, 4 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index b1acdc606f3..c15d46409bc 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -85,21 +85,6 @@ enum csr_regs { B0_IMSK = 0x000c, B0_HWE_ISRC = 0x0010, B0_HWE_IMSK = 0x0014, - B0_SP_ISRC = 0x0018, - B0_XM1_IMSK = 0x0020, - B0_XM1_ISRC = 0x0028, - B0_XM1_PHY_ADDR = 0x0030, - B0_XM1_PHY_DATA = 0x0034, - B0_XM2_IMSK = 0x0040, - B0_XM2_ISRC = 0x0048, - B0_XM2_PHY_ADDR = 0x0050, - B0_XM2_PHY_DATA = 0x0054, - B0_R1_CSR = 0x0060, - B0_R2_CSR = 0x0064, - B0_XS1_CSR = 0x0068, - B0_XA1_CSR = 0x006c, - B0_XS2_CSR = 0x0070, - B0_XA2_CSR = 0x0074, /* Special ISR registers (Yukon-2 only) */ B0_Y2_SP_ISRC2 = 0x001c, @@ -116,36 +101,25 @@ enum csr_regs { B2_MAC_CFG = 0x011a, B2_CHIP_ID = 0x011b, B2_E_0 = 0x011c, - B2_E_1 = 0x011d, - B2_E_2 = 0x011e, + B2_Y2_CLK_GATE = 0x011d, B2_Y2_HW_RES = 0x011e, B2_E_3 = 0x011f, B2_Y2_CLK_CTRL = 0x0120, - B2_LD_CTRL = 0x0128, - B2_LD_TEST = 0x0129, + B2_TI_INI = 0x0130, B2_TI_VAL = 0x0134, B2_TI_CTRL = 0x0138, B2_TI_TEST = 0x0139, - B2_IRQM_INI = 0x0140, - B2_IRQM_VAL = 0x0144, - B2_IRQM_CTRL = 0x0148, - B2_IRQM_TEST = 0x0149, - B2_IRQM_MSK = 0x014c, - B2_IRQM_HWE_MSK = 0x0150, + B2_TST_CTRL1 = 0x0158, B2_TST_CTRL2 = 0x0159, B2_GP_IO = 0x015c, + B2_I2C_CTRL = 0x0160, B2_I2C_DATA = 0x0164, B2_I2C_IRQ = 0x0168, B2_I2C_SW = 0x016c, - B2_BSC_INI = 0x0170, - B2_BSC_VAL = 0x0174, - B2_BSC_CTRL = 0x0178, - B2_BSC_STAT = 0x0179, - B2_BSC_TST = 0x017a, B3_RAM_ADDR = 0x0180, B3_RAM_DATA_LO = 0x0184, @@ -220,8 +194,6 @@ enum { Y2_LED_STAT_ON = 1<<9, /* Status LED On (YUKON-2 only) */ Y2_LED_STAT_OFF = 1<<8, /* Status LED Off (YUKON-2 only) */ - CS_BUS_CLOCK = 1<<9, /* Bus Clock 0/1 = 33/66 MHz */ - CS_BUS_SLOT_SZ = 1<<8, /* Slot Size 0/1 = 32/64 bit slot */ CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */ CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */ CS_STOP_DONE = 1<<5, /* Stop Master is finished */ -- cgit v1.2.3-70-g09d2 From b2f5ad4fec76e78103e7fbb4e808587ea8a6d824 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 26 Oct 2005 12:16:08 -0700 Subject: [PATCH] sky2: use kzalloc Can use kzalloc to save a little code. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 06beb71cb3c..f5b101bf469 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -910,12 +910,11 @@ static int sky2_up(struct net_device *dev) if (!sky2->tx_le) goto err_out; - sky2->tx_ring = kmalloc(TX_RING_SIZE * sizeof(struct ring_info), + sky2->tx_ring = kzalloc(TX_RING_SIZE * sizeof(struct ring_info), GFP_KERNEL); if (!sky2->tx_ring) goto err_out; sky2->tx_prod = sky2->tx_cons = 0; - memset(sky2->tx_ring, 0, TX_RING_SIZE * sizeof(struct ring_info)); sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, &sky2->rx_le_map); @@ -923,7 +922,7 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kmalloc(sky2->rx_pending * sizeof(struct ring_info), + sky2->rx_ring = kzalloc(sky2->rx_pending * sizeof(struct ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; -- cgit v1.2.3-70-g09d2 From d571b694df3ebc66f7a4c507f5a32579e43c2294 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 26 Oct 2005 12:16:09 -0700 Subject: [PATCH] sky2: spelling fixes Cosmetic cleanup's: mostly spelling fixes etc. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 32 ++++++++++++++++---------------- drivers/net/sky2.h | 10 +++++----- 2 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f5b101bf469..92d69fff875 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -214,7 +214,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1); reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD); - /* looks like this xl is back asswards .. */ + /* looks like this XL is back asswards .. */ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) { reg1 |= PCI_Y2_PHY1_COMA; if (hw->ports > 1) @@ -461,7 +461,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (ledover) gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); - /* Enable phy interrupt on autonegotiation complete (or link up) */ + /* Enable phy interrupt on auto-negotiation complete (or link up) */ if (sky2->autoneg == AUTONEG_ENABLE) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); else @@ -578,10 +578,10 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_CTRL_DEF); - /* Flush Rx MAC FIFO on any flowcontrol or error */ + /* Flush Rx MAC FIFO on any flow control or error */ reg = GMR_FS_ANY_ERR; if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1) - reg = 0; /* WA Dev #4115 */ + reg = 0; /* WA dev #4.115 */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg); /* Set threshold to 0xa (64 bytes) @@ -662,7 +662,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) } /* - * This is a workaround code taken from syskonnect sk98lin driver + * This is a workaround code taken from SysKonnect sk98lin driver * to deal with chip bug on Yukon EC rev 0 in the wraparound case. */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, @@ -785,7 +785,7 @@ stopped: sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); } -/* Cleanout receive buffer area, assumes receiver hardware stopped */ +/* Clean out receive buffer area, assumes receiver hardware stopped */ static void sky2_rx_clean(struct sky2_port *sky2) { unsigned i; @@ -1174,7 +1174,7 @@ out_unlock: * Free ring elements from starting at tx_cons until "done" * * NB: the hardware will tell us about partial completion of multi-part - * buffers; these are defered until completion. + * buffers; these are deferred until completion. */ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { @@ -1182,7 +1182,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) unsigned i; if (unlikely(netif_msg_tx_done(sky2))) - printk(KERN_DEBUG "%s: tx done, upto %u\n", + printk(KERN_DEBUG "%s: tx done, up to %u\n", dev->name, done); spin_lock(&sky2->tx_lock); @@ -1282,7 +1282,7 @@ static int sky2_down(struct net_device *dev) sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); - /* turn off led's */ + /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); sky2_tx_clean(sky2); @@ -1364,7 +1364,7 @@ static void sky2_link_up(struct sky2_port *sky2) if (netif_msg_link(sky2)) printk(KERN_INFO PFX - "%s: Link is up at %d Mbps, %s duplex, flowcontrol %s\n", + "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", sky2->netdev->name, sky2->speed, sky2->duplex == DUPLEX_FULL ? "full" : "half", (sky2->tx_pause && sky2->rx_pause) ? "both" : @@ -1451,7 +1451,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) } /* - * Interrrupt from PHY are handled in tasklet (soft irq) + * Interrupt from PHY are handled in tasklet (soft irq) * because accessing phy registers requires spin wait which might * cause excess interrupt latency. */ @@ -1556,7 +1556,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) /* * Receive one packet. * For small packets or errors, just reuse existing skb. - * For larger pakects, get new buffer. + * For larger packets, get new buffer. */ static struct sk_buff *sky2_receive(struct sky2_port *sky2, u16 length, u32 status) @@ -1818,7 +1818,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) } if (status & Y2_IS_PCI_EXP) { - /* PCI-Express uncorrectable Error occured */ + /* PCI-Express uncorrectable Error occurred */ u32 pex_err; pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err); @@ -2113,7 +2113,7 @@ static int sky2_reset(struct sky2_hw *hw) if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) sky2_write8(hw, STAT_FIFO_ISR_WM, 0x10); - else /* WA 4109 */ + else /* WA dev 4.109 */ sky2_write8(hw, STAT_FIFO_ISR_WM, 0x04); sky2_write32(hw, STAT_ISR_TIMER_INI, 0x0190); @@ -2420,7 +2420,7 @@ static void sky2_set_multicast(struct net_device *dev) reg = gma_read16(hw, port, GM_RX_CTRL); reg |= GM_RXCR_UCF_ENA; - if (dev->flags & IFF_PROMISC) /* promiscious */ + if (dev->flags & IFF_PROMISC) /* promiscuous */ reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */ memset(filter, 0xff, sizeof(filter)); @@ -2833,7 +2833,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } #ifdef __BIG_ENDIAN - /* byte swap decriptors in hardware */ + /* byte swap descriptors in hardware */ { u32 reg; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index c15d46409bc..629d08f170f 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -356,11 +356,11 @@ enum { /* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ enum { - Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactiv (0 = activ) */ + Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactive (0 = active) */ Y2_CLK_GAT_LNK2_DIS = 1<<6, /* Disable clock gating Link 2 */ Y2_COR_CLK_LNK2_DIS = 1<<5, /* Disable Core clock Link 2 */ Y2_PCI_CLK_LNK2_DIS = 1<<4, /* Disable PCI clock Link 2 */ - Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactiv (0 = activ) */ + Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactive (0 = active) */ Y2_CLK_GAT_LNK1_DIS = 1<<2, /* Disable clock gating Link 1 */ Y2_COR_CLK_LNK1_DIS = 1<<1, /* Disable Core clock Link 1 */ Y2_PCI_CLK_LNK1_DIS = 1<<0, /* Disable PCI clock Link 1 */ @@ -410,7 +410,7 @@ enum { #define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ /* RAM Interface Registers */ -/* B3_RI_CTRL 16 bit RAM Iface Control Register */ +/* B3_RI_CTRL 16 bit RAM Interface Control Register */ enum { RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */ RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/ @@ -613,7 +613,7 @@ enum { BMU_ENA_RX_CHKSUM = 1<<13, /* Enable Rx TCP/IP Checksum Check */ BMU_DIS_RX_CHKSUM = 1<<12, /* Disable Rx TCP/IP Checksum Check */ BMU_CLR_IRQ_PAR = 1<<11, /* Clear IRQ on Parity errors (Rx) */ - BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segmen. error (Tx) */ + BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment. error (Tx) */ BMU_CLR_IRQ_CHK = 1<<10, /* Clear IRQ Check */ BMU_STOP = 1<<9, /* Stop Rx/Tx Queue */ BMU_START = 1<<8, /* Start Rx/Tx Queue */ @@ -636,7 +636,7 @@ enum { enum { BMU_TX_IPIDINCR_ON = 1<<13, /* Enable IP ID Increment */ BMU_TX_IPIDINCR_OFF = 1<<12, /* Disable IP ID Increment */ - BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segm. length mism. */ + BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment length mismatch */ }; /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/ -- cgit v1.2.3-70-g09d2 From bea86103313fae2e29f2d6eb9a4bd7cbeabd4d32 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 26 Oct 2005 12:16:10 -0700 Subject: [PATCH] sky2: fix NAPI and receive handling Speed up the receive and interrupt processing and eliminate a couple of race conditions from NAPI code. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 63 ++++++++++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 92d69fff875..a85a8d16908 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -76,7 +76,7 @@ #define RX_LE_SIZE 256 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -#define RX_MAX_PENDING (RX_LE_SIZE/2 - 1) +#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) #define RX_DEF_PENDING 128 #define RX_COPY_THRESHOLD 256 @@ -690,7 +690,7 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, setnew: sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); } - *last = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)); + *last = idx; } @@ -723,15 +723,6 @@ static inline void sky2_rx_add(struct sky2_port *sky2, struct ring_info *re) le->opcode = OP_PACKET | HW_OWNER; } -/* Tell receiver about new buffers. */ -static inline void rx_set_put(struct net_device *dev) -{ - struct sky2_port *sky2 = netdev_priv(dev); - - if (sky2->rx_last_put != sky2->rx_put) - sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, - &sky2->rx_last_put, RX_LE_SIZE); -} /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte @@ -1616,6 +1607,10 @@ resubmit: re->skb->ip_summed = CHECKSUM_NONE; sky2_rx_add(sky2, re); + /* Tell receiver about new buffers. */ + sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, + &sky2->rx_last_put, RX_LE_SIZE); + return skb; error: @@ -1664,16 +1659,26 @@ static int sky2_poll(struct net_device *dev0, int *budget) hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); - while (hw->st_idx != hwidx && work_done < to_do) { + + do { struct sky2_status_le *le = hw->st_le + hw->st_idx; struct sky2_port *sky2; struct sk_buff *skb; u32 status; u16 length; - BUG_ON(le->link >= hw->ports); - if (!hw->dev[le->link]) - goto skip; + /* Are we done yet? */ + if (hw->st_idx == hwidx) { + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + hwidx = sky2_read16(hw, STAT_PUT_IDX); + if (hwidx == hw->st_idx) + break; + } + + hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; + prefetch(&hw->st_le[hw->st_idx]); + + BUG_ON(le->link >= hw->ports || !hw->dev[le->link]); sky2 = netdev_priv(hw->dev[le->link]); status = le32_to_cpu(le->status); @@ -1692,6 +1697,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) } else #endif netif_receive_skb(skb); + ++work_done; break; #ifdef SKY2_VLAN_TAG_USED @@ -1722,22 +1728,11 @@ static int sky2_poll(struct net_device *dev0, int *budget) break; } - skip: - hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; - if (hw->st_idx == hwidx) { - hwidx = sky2_read16(hw, STAT_PUT_IDX); - rmb(); - } - } + le->opcode = 0; /* paranoia */ + } while (work_done < to_do); mmiowb(); - if (hw->dev[0]) - rx_set_put(hw->dev[0]); - - if (hw->dev[1]) - rx_set_put(hw->dev[1]); - *budget -= work_done; dev0->quota -= work_done; if (work_done < to_do) { @@ -1750,10 +1745,10 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); } + netif_rx_complete(dev0); hw->intr_mask |= Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); sky2_read32(hw, B0_IMSK); - netif_rx_complete(dev0); } return work_done >= to_do; @@ -1880,6 +1875,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) { struct sky2_hw *hw = dev_id; + struct net_device *dev0 = hw->dev[0]; u32 status; status = sky2_read32(hw, B0_Y2_SP_ISRC2); @@ -1890,12 +1886,13 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) sky2_hw_intr(hw); /* Do NAPI for Rx and Tx status */ - if ((status & Y2_IS_STAT_BMU) && netif_rx_schedule_test(hw->dev[0])) { - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); - + if (status & Y2_IS_STAT_BMU) { hw->intr_mask &= ~Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_schedule(hw->dev[0]); + prefetch(&hw->st_le[hw->st_idx]); + + if (netif_rx_schedule_test(dev0)) + __netif_rx_schedule(dev0); } if (status & Y2_IS_IRQ_PHY1) -- cgit v1.2.3-70-g09d2 From f1e691a24955ea987f021f378324fb5003b1b208 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 26 Oct 2005 12:16:11 -0700 Subject: [PATCH] sky2: version 0.7 Change version number Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a85a8d16908..e08695a2ca5 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -56,7 +56,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.7" #define PFX DRV_NAME " " /* -- cgit v1.2.3-70-g09d2 From ea37ccea66e6bdd9f3571418b6461850088c114e Mon Sep 17 00:00:00 2001 From: Daniele Venzano Date: Tue, 11 Oct 2005 09:44:30 +0200 Subject: [PATCH] Add Wake on LAN support to sis900 (2) Sorry, but that day I had smoked somthing too heavy for me, the patch didn't apply. Here's a new one. The patch availble below adds support for Wake on LAN to the sis900 driver. Some register addresses were added to sis900.h and two new functions were implemented in sis900.c. WoL status is controlled by ethtool. Patch is against 2.6.13. Comments are welcome, but also consider for inclusion in the -mm series. Signed-off-by: Daniele Venzano -- Signed-off-by: Jeff Garzik --- drivers/net/sis900.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/sis900.h | 45 ++++++++++++++++++++++++++++++++ 2 files changed, 116 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 1d4d88680db..3d95fa20cd8 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1,6 +1,6 @@ /* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux. Copyright 1999 Silicon Integrated System Corporation - Revision: 1.08.08 Jan. 22 2005 + Revision: 1.08.09 Sep. 19 2005 Modified from the driver which is originally written by Donald Becker. @@ -17,6 +17,7 @@ SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution, preliminary Rev. 1.0 Jan. 18, 1998 + Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages Rev 1.08.07 Nov. 2 2003 Daniele Venzano add suspend/resume support Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support @@ -76,7 +77,7 @@ #include "sis900.h" #define SIS900_MODULE_NAME "sis900" -#define SIS900_DRV_VERSION "v1.08.08 Jan. 22 2005" +#define SIS900_DRV_VERSION "v1.08.09 Sep. 19 2005" static char version[] __devinitdata = KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n"; @@ -538,6 +539,11 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev, printk("%2.2x:", (u8)net_dev->dev_addr[i]); printk("%2.2x.\n", net_dev->dev_addr[i]); + /* Detect Wake on Lan support */ + ret = inl(CFGPMC & PMESP); + if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0) + printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name); + return 0; err_unmap_rx: @@ -2015,6 +2021,67 @@ static int sis900_nway_reset(struct net_device *net_dev) return mii_nway_restart(&sis_priv->mii_info); } +/** + * sis900_set_wol - Set up Wake on Lan registers + * @net_dev: the net device to probe + * @wol: container for info passed to the driver + * + * Process ethtool command "wol" to setup wake on lan features. + * SiS900 supports sending WoL events if a correct packet is received, + * but there is no simple way to filter them to only a subset (broadcast, + * multicast, unicast or arp). + */ + +static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + struct sis900_private *sis_priv = net_dev->priv; + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 cfgpmcsr = 0, pmctrl_bits = 0; + + if (wol->wolopts == 0) { + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= ~PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + outl(pmctrl_bits, pmctrl_addr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name); + return 0; + } + + if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST + | WAKE_BCAST | WAKE_ARP)) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + pmctrl_bits |= MAGICPKT; + if (wol->wolopts & WAKE_PHY) + pmctrl_bits |= LINKON; + + outl(pmctrl_bits, pmctrl_addr); + + pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr); + cfgpmcsr |= PME_EN; + pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr); + if (netif_msg_wol(sis_priv)) + printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name); + + return 0; +} + +static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol) +{ + long pmctrl_addr = net_dev->base_addr + pmctrl; + u32 pmctrl_bits; + + pmctrl_bits = inl(pmctrl_addr); + if (pmctrl_bits & MAGICPKT) + wol->wolopts |= WAKE_MAGIC; + if (pmctrl_bits & LINKON) + wol->wolopts |= WAKE_PHY; + + wol->supported = (WAKE_PHY | WAKE_MAGIC); +} + static struct ethtool_ops sis900_ethtool_ops = { .get_drvinfo = sis900_get_drvinfo, .get_msglevel = sis900_get_msglevel, @@ -2023,6 +2090,8 @@ static struct ethtool_ops sis900_ethtool_ops = { .get_settings = sis900_get_settings, .set_settings = sis900_set_settings, .nway_reset = sis900_nway_reset, + .get_wol = sis900_get_wol, + .set_wol = sis900_set_wol }; /** diff --git a/drivers/net/sis900.h b/drivers/net/sis900.h index de3c06735d1..4233ea55670 100644 --- a/drivers/net/sis900.h +++ b/drivers/net/sis900.h @@ -33,6 +33,7 @@ enum sis900_registers { rxcfg=0x34, //Receive Configuration Register flctrl=0x38, //Flow Control Register rxlen=0x3c, //Receive Packet Length Register + cfgpmcsr=0x44, //Configuration Power Management Control/Status Register rfcr=0x48, //Receive Filter Control Register rfdr=0x4C, //Receive Filter Data Register pmctrl=0xB0, //Power Management Control Register @@ -140,6 +141,50 @@ enum sis96x_eeprom_command { EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100 }; +/* PCI Registers */ +enum sis900_pci_registers { + CFGPMC = 0x40, + CFGPMCSR = 0x44 +}; + +/* Power management capabilities bits */ +enum sis900_cfgpmc_register_bits { + PMVER = 0x00070000, + DSI = 0x00100000, + PMESP = 0xf8000000 +}; + +enum sis900_pmesp_bits { + PME_D0 = 0x1, + PME_D1 = 0x2, + PME_D2 = 0x4, + PME_D3H = 0x8, + PME_D3C = 0x10 +}; + +/* Power management control/status bits */ +enum sis900_cfgpmcsr_register_bits { + PMESTS = 0x00004000, + PME_EN = 0x00000100, // Power management enable + PWR_STA = 0x00000003 // Current power state +}; + +/* Wake-on-LAN support. */ +enum sis900_power_management_control_register_bits { + LINKLOSS = 0x00000001, + LINKON = 0x00000002, + MAGICPKT = 0x00000400, + ALGORITHM = 0x00000800, + FRM1EN = 0x00100000, + FRM2EN = 0x00200000, + FRM3EN = 0x00400000, + FRM1ACS = 0x01000000, + FRM2ACS = 0x02000000, + FRM3ACS = 0x04000000, + WAKEALL = 0x40000000, + GATECLK = 0x80000000 +}; + /* Management Data I/O (mdio) frame */ #define MIIread 0x6000 #define MIIwrite 0x5002 -- cgit v1.2.3-70-g09d2 From a15e0384dd22ee08f56d62761ce9d770488f6f4e Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 31 Oct 2005 07:59:37 -0500 Subject: [netdrvr 8139too] replace hand-crafted kernel thread with workqueue Gone are the days when 8139too was a shining example of how to use kernel threads. Delayed workqueues are easier, and map precisely to our task: running code from a kernel thread, after a periodic sleep. --- drivers/net/8139too.c | 87 +++++++++++++++++++-------------------------------- 1 file changed, 33 insertions(+), 54 deletions(-) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 30bee11c48b..9de58e249bc 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -590,12 +590,12 @@ struct rtl8139_private { spinlock_t lock; spinlock_t rx_lock; chip_t chipset; - pid_t thr_pid; - wait_queue_head_t thr_wait; - struct completion thr_exited; u32 rx_config; struct rtl_extra_stats xstats; - int time_to_die; + + struct work_struct thread; + long time_to_die; /* -1 no thr, 0 thr active, 1 thr cancel */ + struct mii_if_info mii; unsigned int regs_len; unsigned long fifo_copy_timeout; @@ -620,7 +620,7 @@ static int rtl8139_open (struct net_device *dev); static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, int val); -static void rtl8139_start_thread(struct net_device *dev); +static void rtl8139_start_thread(struct rtl8139_private *tp); static void rtl8139_tx_timeout (struct net_device *dev); static void rtl8139_init_ring (struct net_device *dev); static int rtl8139_start_xmit (struct sk_buff *skb, @@ -637,6 +637,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev); static void rtl8139_set_rx_mode (struct net_device *dev); static void __set_rx_mode (struct net_device *dev); static void rtl8139_hw_start (struct net_device *dev); +static void rtl8139_thread (void *_data); static struct ethtool_ops rtl8139_ethtool_ops; /* write MMIO register, with flush */ @@ -1007,8 +1008,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1)); spin_lock_init (&tp->lock); spin_lock_init (&tp->rx_lock); - init_waitqueue_head (&tp->thr_wait); - init_completion (&tp->thr_exited); + INIT_WORK(&tp->thread, rtl8139_thread, dev); tp->mii.dev = dev; tp->mii.mdio_read = mdio_read; tp->mii.mdio_write = mdio_write; @@ -1345,7 +1345,7 @@ static int rtl8139_open (struct net_device *dev) dev->irq, RTL_R8 (MediaStatus), tp->mii.full_duplex ? "full" : "half"); - rtl8139_start_thread(dev); + rtl8139_start_thread(tp); return 0; } @@ -1594,56 +1594,45 @@ static inline void rtl8139_thread_iter (struct net_device *dev, RTL_R8 (Config1)); } -static int rtl8139_thread (void *data) +static void rtl8139_thread (void *_data) { - struct net_device *dev = data; + struct net_device *dev = _data; struct rtl8139_private *tp = netdev_priv(dev); - unsigned long timeout; - - daemonize("%s", dev->name); - allow_signal(SIGTERM); - - while (1) { - timeout = next_tick; - do { - timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); - /* make swsusp happy with our thread */ - try_to_freeze(); - } while (!signal_pending (current) && (timeout > 0)); - if (signal_pending (current)) { - flush_signals(current); - } - - if (tp->time_to_die) - break; - - if (rtnl_lock_interruptible ()) - break; + if ((tp->time_to_die == 0) && + (rtnl_lock_interruptible() == 0)) { rtl8139_thread_iter (dev, tp, tp->mmio_addr); rtnl_unlock (); } - complete_and_exit (&tp->thr_exited, 0); + if (tp->time_to_die == 0) + schedule_delayed_work(&tp->thread, next_tick); } -static void rtl8139_start_thread(struct net_device *dev) +static void rtl8139_start_thread(struct rtl8139_private *tp) { - struct rtl8139_private *tp = netdev_priv(dev); - - tp->thr_pid = -1; tp->twistie = 0; - tp->time_to_die = 0; + tp->time_to_die = -1; if (tp->chipset == CH_8139_K) tp->twistie = 1; else if (tp->drv_flags & HAS_LNK_CHNG) return; - tp->thr_pid = kernel_thread(rtl8139_thread, dev, CLONE_FS|CLONE_FILES); - if (tp->thr_pid < 0) { - printk (KERN_WARNING "%s: unable to start kernel thread\n", - dev->name); - } + tp->time_to_die = 0; + + schedule_delayed_work(&tp->thread, next_tick); +} + +static void rtl8139_stop_thread(struct rtl8139_private *tp) +{ + if (tp->time_to_die < 0) + return; + + tp->time_to_die = 1; + wmb(); + + if (cancel_delayed_work(&tp->thread) == 0) + flush_scheduled_work(); } static inline void rtl8139_tx_clear (struct rtl8139_private *tp) @@ -2224,22 +2213,12 @@ static int rtl8139_close (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; - int ret = 0; unsigned long flags; netif_stop_queue (dev); - if (tp->thr_pid >= 0) { - tp->time_to_die = 1; - wmb(); - ret = kill_proc (tp->thr_pid, SIGTERM, 1); - if (ret) { - printk (KERN_ERR "%s: unable to signal thread\n", dev->name); - return ret; - } - wait_for_completion (&tp->thr_exited); - } - + rtl8139_stop_thread(tp); + if (netif_msg_ifdown(tp)) printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n", dev->name, RTL_R16 (IntrStatus)); -- cgit v1.2.3-70-g09d2 From 38b492a21ac1b0f0a5ebed69c9e2ee6f4202f574 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 4 Nov 2005 22:36:28 -0500 Subject: [netdrvr 8139too] use cancel_rearming_delayed_work() to cancel thread Noted by Herbert Xu. --- drivers/net/8139too.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 9de58e249bc..bcea9d41c32 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -586,7 +586,8 @@ struct rtl8139_private { dma_addr_t tx_bufs_dma; signed char phys[4]; /* MII device addresses. */ char twistie, twist_row, twist_col; /* Twister tune state. */ - unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int default_port : 4; /* Last dev->if_port value. */ + unsigned int have_thread : 1; spinlock_t lock; spinlock_t rx_lock; chip_t chipset; @@ -594,7 +595,6 @@ struct rtl8139_private { struct rtl_extra_stats xstats; struct work_struct thread; - long time_to_die; /* -1 no thr, 0 thr active, 1 thr cancel */ struct mii_if_info mii; unsigned int regs_len; @@ -1599,40 +1599,33 @@ static void rtl8139_thread (void *_data) struct net_device *dev = _data; struct rtl8139_private *tp = netdev_priv(dev); - if ((tp->time_to_die == 0) && - (rtnl_lock_interruptible() == 0)) { + if (rtnl_lock_interruptible() == 0) { rtl8139_thread_iter (dev, tp, tp->mmio_addr); rtnl_unlock (); } - if (tp->time_to_die == 0) - schedule_delayed_work(&tp->thread, next_tick); + schedule_delayed_work(&tp->thread, next_tick); } static void rtl8139_start_thread(struct rtl8139_private *tp) { tp->twistie = 0; - tp->time_to_die = -1; if (tp->chipset == CH_8139_K) tp->twistie = 1; else if (tp->drv_flags & HAS_LNK_CHNG) return; - tp->time_to_die = 0; + tp->have_thread = 1; schedule_delayed_work(&tp->thread, next_tick); } static void rtl8139_stop_thread(struct rtl8139_private *tp) { - if (tp->time_to_die < 0) - return; - - tp->time_to_die = 1; - wmb(); - - if (cancel_delayed_work(&tp->thread) == 0) - flush_scheduled_work(); + if (tp->have_thread) { + cancel_rearming_delayed_work(&tp->thread); + tp->have_thread = 0; + } } static inline void rtl8139_tx_clear (struct rtl8139_private *tp) -- cgit v1.2.3-70-g09d2 From 96a71d52bb91d9b386a60f904956420f98946dd3 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 4 Nov 2005 22:46:35 -0500 Subject: [netdrvr 8139too] use rtnl_shlock_nowait() rather than rtnl_lock_interruptible() --- drivers/net/8139too.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index bcea9d41c32..120baaa9075 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1599,7 +1599,7 @@ static void rtl8139_thread (void *_data) struct net_device *dev = _data; struct rtl8139_private *tp = netdev_priv(dev); - if (rtnl_lock_interruptible() == 0) { + if (rtnl_shlock_nowait() == 0) { rtl8139_thread_iter (dev, tp, tp->mmio_addr); rtnl_unlock (); } -- cgit v1.2.3-70-g09d2 From 760559e1330a58cc5b320154a20e64b8444143c0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 10 Nov 2005 04:31:55 -0500 Subject: [netdrvr 8139too] fast poll for thread, if an unlikely race occurs The rtl8139 thread is triggered only on rare 8139 hardware, the race itself is unlikely, and the impact of racing is low. We don't care enough to create a more-complex race-free solution. Rather, if the trylock fails, we now simply poll twice a second until we do get the lock. --- drivers/net/8139too.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 120baaa9075..d2102a27d30 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1598,13 +1598,19 @@ static void rtl8139_thread (void *_data) { struct net_device *dev = _data; struct rtl8139_private *tp = netdev_priv(dev); + unsigned long thr_delay; if (rtnl_shlock_nowait() == 0) { rtl8139_thread_iter (dev, tp, tp->mmio_addr); rtnl_unlock (); + + thr_delay = next_tick; + } else { + /* unlikely race. mitigate with fast poll. */ + thr_delay = HZ / 2; } - schedule_delayed_work(&tp->thread, next_tick); + schedule_delayed_work(&tp->thread, thr_delay); } static void rtl8139_start_thread(struct rtl8139_private *tp) -- cgit v1.2.3-70-g09d2 From d0bbccfa3297d3ef6ae4691585abde9a6c26b186 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 10 Nov 2005 15:29:27 -0800 Subject: [PATCH] sky2 needs dma_mapping.h On alpha: drivers/net/sky2.c: In function `sky2_probe': drivers/net/sky2.c:2819: error: `DMA_64BIT_MASK' undeclared (first use in this function) drivers/net/sky2.c:2819: error: (Each undeclared identifier is reported only once drivers/net/sky2.c:2819: error: for each function it appears in.) drivers/net/sky2.c:2825: error: `DMA_32BIT_MASK' undeclared (first use in this function) Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e08695a2ca5..9f89000e5ad 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 4e0952c74ee450ded86e8946ce58ea8dfd05b007 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:34:57 -0800 Subject: [PATCH] bonding: add bond name to all error messages Add the bond name to all error messages so we can tell which one is complaining. Also reformats some error messages to be more consistent. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_3ad.c | 74 +++++++++++++++++++++------------- drivers/net/bonding/bond_alb.c | 30 ++++++++------ drivers/net/bonding/bond_main.c | 89 ++++++++++++++++++++++------------------- 3 files changed, 112 insertions(+), 81 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index d2f34d5a808..04705233ca0 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1198,10 +1198,10 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) // detect loopback situation if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) { // INFO_RECEIVED_LOOPBACK_FRAMES - printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n", - port->slave->dev->name); - printk(KERN_ERR "Check the configuration to verify that all Adapters " - "are connected to 802.3ad compliant switch ports\n"); + printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on " + "adapter (%s). Check the configuration to verify that all " + "Adapters are connected to 802.3ad compliant switch ports\n", + port->slave->dev->master->name, port->slave->dev->name); __release_rx_machine_lock(port); return; } @@ -1378,8 +1378,9 @@ static void ad_port_selection_logic(struct port *port) } } if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list - printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was " + printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was " "related to aggregator %d but was not on its port list\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name, port->aggregator->aggregator_identifier); } @@ -1450,7 +1451,8 @@ static void ad_port_selection_logic(struct port *port) dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier); } else { - printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n", + printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n", + port->slave->dev->master->name, port->actor_port_number, port->slave->dev->name); } } @@ -1582,8 +1584,9 @@ static void ad_agg_selection_logic(struct aggregator *aggregator) // check if any partner replys if (best_aggregator->is_individual) { - printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner " - "for any adapters in the bond\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from " + "the link partner for any adapters in the bond\n", + best_aggregator->slave->dev->master->name); } // check if there are more than one aggregator @@ -1915,7 +1918,8 @@ int bond_3ad_bind_slave(struct slave *slave) struct aggregator *aggregator; if (bond == NULL) { - printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name); + printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n", + slave->dev->master->name, slave->dev->name); return -1; } @@ -1990,7 +1994,9 @@ void bond_3ad_unbind_slave(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to " + "unbind an uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2021,7 +2027,8 @@ void bond_3ad_unbind_slave(struct slave *slave) dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier); if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) { - printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + aggregator->slave->dev->master->name); // select new active aggregator select_new_active_agg = 1; } @@ -2051,15 +2058,17 @@ void bond_3ad_unbind_slave(struct slave *slave) ad_agg_selection_logic(__get_first_agg(port)); } } else { - printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, " - "and could not find a new aggregator for its ports\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, " + "and could not find a new aggregator for its ports\n", + slave->dev->master->name); } } else { // in case that the only port related to this aggregator is the one we want to remove select_new_active_agg = aggregator->is_active; // clear the aggregator ad_clear_agg(aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2085,7 +2094,8 @@ void bond_3ad_unbind_slave(struct slave *slave) // clear the aggregator ad_clear_agg(temp_aggregator); if (select_new_active_agg) { - printk(KERN_INFO "Removing an active aggregator\n"); + printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n", + slave->dev->master->name); // select new active aggregator ad_agg_selection_logic(__get_first_agg(port)); } @@ -2131,7 +2141,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // select the active aggregator for the bond if ((port = __get_first_port(bond))) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is " + "uninitialized\n", bond->dev->name); goto re_arm; } @@ -2143,7 +2154,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond) // for each port run the state machines for (port = __get_first_port(bond); port; port = __get_next_port(port)) { if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n"); + printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized " + "port\n", bond->dev->name); goto re_arm; } @@ -2184,7 +2196,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u port = &(SLAVE_AD_INFO(slave).port); if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is " + "uninitialized\n", slave->dev->name, slave->dev->master->name); return; } @@ -2230,8 +2243,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: speed " + "changed for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2257,8 +2271,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed " + "for uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2285,8 +2300,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) // if slave is null, the whole port is not initialized if (!port->slave) { - printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n", - slave->dev->name); + printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for " + "uninitialized port on %s\n", + slave->dev->master->name, slave->dev->name); return; } @@ -2363,7 +2379,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (bond_3ad_get_active_agg_info(bond, &ad_info)) { - printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: " + "bond_3ad_get_active_agg_info failed\n", dev->name); goto out; } @@ -2372,7 +2389,9 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) if (slaves_in_agg == 0) { /*the aggregator is empty*/ - printk(KERN_DEBUG "ERROR: active aggregator is empty\n"); + printk(KERN_DEBUG DRV_NAME ": %s: Error: active " + "aggregator is empty\n", + dev->name); goto out; } @@ -2390,7 +2409,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev) } if (slave_agg_no >= 0) { - printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id); + printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on " + "for aggregator ID %d\n", dev->name, agg_id); goto out; } diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index f8fce396119..96dfb90c525 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -207,7 +207,7 @@ static int tlb_initialize(struct bonding *bond) bond_info->tx_hashtbl = kmalloc(size, GFP_KERNEL); if (!bond_info->tx_hashtbl) { printk(KERN_ERR DRV_NAME - ": Error: %s: Failed to allocate TLB hash table\n", + ": %s: Error: Failed to allocate TLB hash table\n", bond->dev->name); _unlock_tx_hashtbl(bond); return -1; @@ -513,7 +513,8 @@ static void rlb_update_client(struct rlb_client_info *client_info) client_info->mac_dst); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to create an ARP packet\n"); + ": %s: Error: failed to create an ARP packet\n", + client_info->slave->dev->master->name); continue; } @@ -523,7 +524,8 @@ static void rlb_update_client(struct rlb_client_info *client_info) skb = vlan_put_tag(skb, client_info->vlan_id); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to insert VLAN tag\n"); + ": %s: Error: failed to insert VLAN tag\n", + client_info->slave->dev->master->name); continue; } } @@ -606,8 +608,9 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, u32 src_ip) if (!client_info->slave) { printk(KERN_ERR DRV_NAME - ": Error: found a client with no channel in " - "the client's hash table\n"); + ": %s: Error: found a client with no channel in " + "the client's hash table\n", + bond->dev->name); continue; } /*update all clients using this src_ip, that are not assigned @@ -807,7 +810,7 @@ static int rlb_initialize(struct bonding *bond) bond_info->rx_hashtbl = kmalloc(size, GFP_KERNEL); if (!bond_info->rx_hashtbl) { printk(KERN_ERR DRV_NAME - ": Error: %s: Failed to allocate RLB hash table\n", + ": %s: Error: Failed to allocate RLB hash table\n", bond->dev->name); _unlock_rx_hashtbl(bond); return -1; @@ -927,7 +930,8 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[]) skb = vlan_put_tag(skb, vlan->vlan_id); if (!skb) { printk(KERN_ERR DRV_NAME - ": Error: failed to insert VLAN tag\n"); + ": %s: Error: failed to insert VLAN tag\n", + bond->dev->name); continue; } } @@ -956,11 +960,11 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw) s_addr.sa_family = dev->type; if (dev_set_mac_address(dev, &s_addr)) { printk(KERN_ERR DRV_NAME - ": Error: dev_set_mac_address of dev %s failed! ALB " + ": %s: Error: dev_set_mac_address of dev %s failed! ALB " "mode requires that the base driver support setting " "the hw address also when the network device's " "interface is open\n", - dev->name); + dev->master->name, dev->name); return -EOPNOTSUPP; } return 0; @@ -1153,16 +1157,16 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav bond->alb_info.rlb_enabled); printk(KERN_WARNING DRV_NAME - ": Warning: the hw address of slave %s is in use by " + ": %s: Warning: the hw address of slave %s is in use by " "the bond; giving it the hw address of %s\n", - slave->dev->name, free_mac_slave->dev->name); + bond->dev->name, slave->dev->name, free_mac_slave->dev->name); } else if (has_bond_addr) { printk(KERN_ERR DRV_NAME - ": Error: the hw address of slave %s is in use by the " + ": %s: Error: the hw address of slave %s is in use by the " "bond; couldn't find a slave with a free hw address to " "give it (this should not have happened)\n", - slave->dev->name); + bond->dev->name, slave->dev->name); return -EFAULT; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 94cec3cf2a1..7838522d509 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -910,7 +910,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid) res = bond_add_vlan(bond, vid); if (res) { printk(KERN_ERR DRV_NAME - ": %s: Failed to add vlan id %d\n", + ": %s: Error: Failed to add vlan id %d\n", bond_dev->name, vid); } } @@ -944,7 +944,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid) res = bond_del_vlan(bond, vid); if (res) { printk(KERN_ERR DRV_NAME - ": %s: Failed to remove vlan id %d\n", + ": %s: Error: Failed to remove vlan id %d\n", bond_dev->name, vid); } } @@ -1644,8 +1644,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL && slave_dev->do_ioctl == NULL) { printk(KERN_WARNING DRV_NAME - ": Warning : no link monitoring support for %s\n", - slave_dev->name); + ": %s: Warning: no link monitoring support for %s\n", + bond_dev->name, slave_dev->name); } /* bond must be initialized by bond_open() before enslaving */ @@ -1666,17 +1666,17 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); if (!list_empty(&bond->vlan_list)) { printk(KERN_ERR DRV_NAME - ": Error: cannot enslave VLAN " + ": %s: Error: cannot enslave VLAN " "challenged slave %s on VLAN enabled " - "bond %s\n", slave_dev->name, + "bond %s\n", bond_dev->name, slave_dev->name, bond_dev->name); return -EPERM; } else { printk(KERN_WARNING DRV_NAME - ": Warning: enslaved VLAN challenged " + ": %s: Warning: enslaved VLAN challenged " "slave %s. Adding VLANs will be blocked as " "long as %s is part of bond %s\n", - slave_dev->name, slave_dev->name, + bond_dev->name, slave_dev->name, slave_dev->name, bond_dev->name); bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } @@ -1706,12 +1706,11 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (slave_dev->set_mac_address == NULL) { printk(KERN_ERR DRV_NAME - ": Error: The slave device you specified does " - "not support setting the MAC address.\n"); - printk(KERN_ERR - "Your kernel likely does not support slave devices.\n"); - - res = -EOPNOTSUPP; + ": %s: Error: The slave device you specified does " + "not support setting the MAC address. " + "Your kernel likely does not support slave " + "devices.\n", bond_dev->name); + res = -EOPNOTSUPP; goto err_undo_flags; } @@ -1827,21 +1826,21 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de * the messages for netif_carrier. */ printk(KERN_WARNING DRV_NAME - ": Warning: MII and ETHTOOL support not " + ": %s: Warning: MII and ETHTOOL support not " "available for interface %s, and " "arp_interval/arp_ip_target module parameters " "not specified, thus bonding will not detect " "link failures! see bonding.txt for details.\n", - slave_dev->name); + bond_dev->name, slave_dev->name); } else if (link_reporting == -1) { /* unable get link status using mii/ethtool */ printk(KERN_WARNING DRV_NAME - ": Warning: can't get link status from " + ": %s: Warning: can't get link status from " "interface %s; the network driver associated " "with this interface does not support MII or " "ETHTOOL link status reporting, thus miimon " "has no effect on this interface.\n", - slave_dev->name); + bond_dev->name, slave_dev->name); } } @@ -1868,15 +1867,15 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de if (bond_update_speed_duplex(new_slave) && (new_slave->link != BOND_LINK_DOWN)) { printk(KERN_WARNING DRV_NAME - ": Warning: failed to get speed and duplex from %s, " + ": %s: Warning: failed to get speed and duplex from %s, " "assumed to be 100Mb/sec and Full.\n", - new_slave->dev->name); + bond_dev->name, new_slave->dev->name); if (bond->params.mode == BOND_MODE_8023AD) { - printk(KERN_WARNING - "Operation of 802.3ad mode requires ETHTOOL " + printk(KERN_WARNING DRV_NAME + ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL " "support in base driver for proper aggregator " - "selection.\n"); + "selection.\n", bond_dev->name); } } @@ -2010,7 +2009,7 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev)) { printk(KERN_ERR DRV_NAME - ": Error: %s: cannot release %s.\n", + ": %s: Error: cannot release %s.\n", bond_dev->name, slave_dev->name); return -EINVAL; } @@ -2031,11 +2030,12 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de ETH_ALEN); if (!mac_addr_differ && (bond->slave_cnt > 1)) { printk(KERN_WARNING DRV_NAME - ": Warning: the permanent HWaddr of %s " + ": %s: Warning: the permanent HWaddr of %s " "- %02X:%02X:%02X:%02X:%02X:%02X - is " "still in use by %s. Set the HWaddr of " "%s to a different address to avoid " "conflicts.\n", + bond_dev->name, slave_dev->name, slave->perm_hwaddr[0], slave->perm_hwaddr[1], @@ -2111,19 +2111,20 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } else { printk(KERN_WARNING DRV_NAME - ": Warning: clearing HW address of %s while it " + ": %s: Warning: clearing HW address of %s while it " "still has VLANs.\n", - bond_dev->name); + bond_dev->name, bond_dev->name); printk(KERN_WARNING DRV_NAME - ": When re-adding slaves, make sure the bond's " - "HW address matches its VLANs'.\n"); + ": %s: When re-adding slaves, make sure the bond's " + "HW address matches its VLANs'.\n", + bond_dev->name); } } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) && !bond_has_challenged_slaves(bond)) { printk(KERN_INFO DRV_NAME - ": last VLAN challenged slave %s " + ": %s: last VLAN challenged slave %s " "left bond %s. VLAN blocking is removed\n", - slave_dev->name, bond_dev->name); + bond_dev->name, slave_dev->name, bond_dev->name); bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED; } @@ -2274,12 +2275,13 @@ static int bond_release_all(struct net_device *bond_dev) bond_dev->features |= NETIF_F_VLAN_CHALLENGED; } else { printk(KERN_WARNING DRV_NAME - ": Warning: clearing HW address of %s while it " + ": %s: Warning: clearing HW address of %s while it " "still has VLANs.\n", - bond_dev->name); + bond_dev->name, bond_dev->name); printk(KERN_WARNING DRV_NAME - ": When re-adding slaves, make sure the bond's " - "HW address matches its VLANs'.\n"); + ": %s: When re-adding slaves, make sure the bond's " + "HW address matches its VLANs'.\n", + bond_dev->name); } printk(KERN_INFO DRV_NAME @@ -2596,8 +2598,11 @@ static void bond_mii_monitor(struct net_device *bond_dev) break; default: /* Should not happen */ - printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n", - slave->dev->name, slave->link); + printk(KERN_ERR DRV_NAME + ": %s: Error: %s Illegal value (link=%d)\n", + bond_dev->name, + slave->dev->name, + slave->link); goto out; } /* end of switch (slave->link) */ @@ -4397,8 +4402,9 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev) struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); if (!skb2) { printk(KERN_ERR DRV_NAME - ": Error: bond_xmit_broadcast(): " - "skb_clone() failed\n"); + ": %s: Error: bond_xmit_broadcast(): " + "skb_clone() failed\n", + bond_dev->name); continue; } @@ -4467,7 +4473,8 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode) default: /* Should never happen, mode already checked */ printk(KERN_ERR DRV_NAME - ": Error: Unknown bonding mode %d\n", + ": %s: Error: Unknown bonding mode %d\n", + bond_dev->name, mode); break; } @@ -4670,7 +4677,7 @@ static int bond_check_params(struct bond_params *params) if (max_bonds < 1 || max_bonds > INT_MAX) { printk(KERN_WARNING DRV_NAME ": Warning: max_bonds (%d) not in range %d-%d, so it " - "was reset to BOND_DEFAULT_MAX_BONDS (%d)", + "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS); max_bonds = BOND_DEFAULT_MAX_BONDS; } -- cgit v1.2.3-70-g09d2 From 2ac47660f9b4d0ea1a2ab9becba03c14ef5d9b99 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:03 -0800 Subject: [PATCH] bonding: expand module param descriptions Expand and correct the parameter descriptions shown by modinfo. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7838522d509..9a2d266a0ab 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -565,17 +565,24 @@ MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds"); module_param(downdelay, int, 0); -MODULE_PARM_DESC(downdelay, "Delay before considering link down, in milliseconds"); +MODULE_PARM_DESC(downdelay, "Delay before considering link down, " + "in milliseconds"); module_param(use_carrier, int, 0); -MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default)"); +MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " + "0 for off, 1 for on (default)"); module_param(mode, charp, 0); -MODULE_PARM_DESC(mode, "Mode of operation : 0 for round robin, 1 for active-backup, 2 for xor"); +MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, " + "1 for active-backup, 2 for balance-xor, " + "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " + "6 for balance-alb"); module_param(primary, charp, 0); MODULE_PARM_DESC(primary, "Primary network device to use"); module_param(lacp_rate, charp, 0); -MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner (slow/fast)"); +MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " + "(slow/fast)"); module_param(xmit_hash_policy, charp, 0); -MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method : 0 for layer 2 (default), 1 for layer 3+4"); +MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" + ", 1 for layer 3+4"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); -- cgit v1.2.3-70-g09d2 From c61b75ad03f3a30ef247cac27406f030c10628b0 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:13 -0800 Subject: [PATCH] bonding: Add transmit policy to /proc Adds information about the recently-added transmit policy setting to each bond's /proc file. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 9a2d266a0ab..9d9f027a9af 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3269,6 +3269,13 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Bonding Mode: %s\n", bond_mode_name(bond->params.mode)); + if (bond->params.mode == BOND_MODE_XOR || + bond->params.mode == BOND_MODE_8023AD) { + seq_printf(seq, "Transmit Hash Policy: %s (%d)\n", + xmit_hashtype_tbl[bond->params.xmit_policy].modename, + bond->params.xmit_policy); + } + if (USES_PRIMARY(bond->params.mode)) { seq_printf(seq, "Primary Slave: %s\n", (bond->params.primary[0]) ? -- cgit v1.2.3-70-g09d2 From 0f418b2ac49e97b7b763e0473320a201eec15ed3 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:21 -0800 Subject: [PATCH] bonding: get slave name from actual slave instead of param list Take the primary slave name shown in /proc from the actual slave dev instead of from the command-line parameter, which won't be present if the bond is created via sysfs. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 9d9f027a9af..3e9b47d9f21 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3278,8 +3278,8 @@ static void bond_info_show_master(struct seq_file *seq) if (USES_PRIMARY(bond->params.mode)) { seq_printf(seq, "Primary Slave: %s\n", - (bond->params.primary[0]) ? - bond->params.primary : "None"); + (bond->primary_slave) ? + bond->primary_slave->dev->name : "None"); seq_printf(seq, "Currently Active Slave: %s\n", (curr) ? curr->dev->name : "None"); -- cgit v1.2.3-70-g09d2 From 0d206a3af4329bd833cfa5fe1cc7fe146e49c131 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:30 -0800 Subject: [PATCH] bonding: move kmalloc out of spinlock in ALB init Move memory allocations out of the spinlock during ALB init. This gets rid of a sleeping-inside-spinlock warning and accompanying stack dump. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_alb.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 96dfb90c525..e8d10f3cb1b 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -198,20 +198,21 @@ static int tlb_initialize(struct bonding *bond) { struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond)); int size = TLB_HASH_TABLE_SIZE * sizeof(struct tlb_client_info); + struct tlb_client_info *new_hashtbl; int i; spin_lock_init(&(bond_info->tx_hashtbl_lock)); - _lock_tx_hashtbl(bond); - - bond_info->tx_hashtbl = kmalloc(size, GFP_KERNEL); - if (!bond_info->tx_hashtbl) { + new_hashtbl = kmalloc(size, GFP_KERNEL); + if (!new_hashtbl) { printk(KERN_ERR DRV_NAME ": %s: Error: Failed to allocate TLB hash table\n", bond->dev->name); - _unlock_tx_hashtbl(bond); return -1; } + _lock_tx_hashtbl(bond); + + bond_info->tx_hashtbl = new_hashtbl; memset(bond_info->tx_hashtbl, 0, size); @@ -800,21 +801,22 @@ static int rlb_initialize(struct bonding *bond) { struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond)); struct packet_type *pk_type = &(BOND_ALB_INFO(bond).rlb_pkt_type); + struct rlb_client_info *new_hashtbl; int size = RLB_HASH_TABLE_SIZE * sizeof(struct rlb_client_info); int i; spin_lock_init(&(bond_info->rx_hashtbl_lock)); - _lock_rx_hashtbl(bond); - - bond_info->rx_hashtbl = kmalloc(size, GFP_KERNEL); - if (!bond_info->rx_hashtbl) { + new_hashtbl = kmalloc(size, GFP_KERNEL); + if (!new_hashtbl) { printk(KERN_ERR DRV_NAME ": %s: Error: Failed to allocate RLB hash table\n", bond->dev->name); - _unlock_rx_hashtbl(bond); return -1; } + _lock_rx_hashtbl(bond); + + bond_info->rx_hashtbl = new_hashtbl; bond_info->rx_hashtbl_head = RLB_NULL_INDEX; -- cgit v1.2.3-70-g09d2 From b76850ab577bb4b929e60894d2025bbfcc043984 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:35 -0800 Subject: [PATCH] bonding: explicitly clear RLB flag during ALB init Explicitly clear RLB flag during ALB init. This is needed for sysfs support, since the bond mode can be changed at runtime via sysfs. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_alb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index e8d10f3cb1b..24f4a3d1499 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1256,6 +1256,8 @@ int bond_alb_initialize(struct bonding *bond, int rlb_enabled) tlb_deinitialize(bond); return res; } + } else { + bond->alb_info.rlb_enabled = 0; } return 0; -- cgit v1.2.3-70-g09d2 From 12479f9a823dc7d791f198af2d3e4efae418a65e Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:44 -0800 Subject: [PATCH] bonding: expose some structs The sysfs code needs to know what these structs look like, so make them not static, and move the definition to the header. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 13 +++++-------- drivers/net/bonding/bonding.h | 5 +++++ 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3e9b47d9f21..7139d6e6bdb 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -557,6 +557,7 @@ static char *lacp_rate = NULL; static char *xmit_hash_policy = NULL; static int arp_interval = BOND_LINK_ARP_INTERV; static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, }; +struct bond_params bonding_defaults; module_param(max_bonds, int, 0); MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); @@ -593,7 +594,7 @@ MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); static const char *version = DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n"; -static LIST_HEAD(bond_dev_list); +LIST_HEAD(bond_dev_list); #ifdef CONFIG_PROC_FS static struct proc_dir_entry *bond_proc_dir = NULL; @@ -605,18 +606,14 @@ static int bond_mode = BOND_MODE_ROUNDROBIN; static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2; static int lacp_fast = 0; -struct bond_parm_tbl { - char *modename; - int mode; -}; -static struct bond_parm_tbl bond_lacp_tbl[] = { +struct bond_parm_tbl bond_lacp_tbl[] = { { "slow", AD_LACP_SLOW}, { "fast", AD_LACP_FAST}, { NULL, -1}, }; -static struct bond_parm_tbl bond_mode_tbl[] = { +struct bond_parm_tbl bond_mode_tbl[] = { { "balance-rr", BOND_MODE_ROUNDROBIN}, { "active-backup", BOND_MODE_ACTIVEBACKUP}, { "balance-xor", BOND_MODE_XOR}, @@ -627,7 +624,7 @@ static struct bond_parm_tbl bond_mode_tbl[] = { { NULL, -1}, }; -static struct bond_parm_tbl xmit_hashtype_tbl[] = { +struct bond_parm_tbl xmit_hashtype_tbl[] = { { "layer2", BOND_XMIT_POLICY_LAYER2}, { "layer3+4", BOND_XMIT_POLICY_LAYER34}, { NULL, -1}, diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 1433e91db0f..c8a873fe76c 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -152,6 +152,11 @@ struct bond_params { u32 arp_targets[BOND_MAX_ARP_TARGETS]; }; +struct bond_parm_tbl { + char *modename; + int mode; +}; + struct vlan_entry { struct list_head vlan_list; u32 vlan_ip; -- cgit v1.2.3-70-g09d2 From a77b53258d76513c37e766dc0db1fc9db7c4ac1e Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:35:51 -0800 Subject: [PATCH] bonding: make functions not static The sysfs code needs access these functions, so make them not static, and move the protos to the header file. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 25 ++++++++++++------------- drivers/net/bonding/bonding.h | 12 ++++++++++++ 2 files changed, 24 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7139d6e6bdb..b8d617626c9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -632,12 +632,11 @@ struct bond_parm_tbl xmit_hashtype_tbl[] = { /*-------------------------- Forward declarations ---------------------------*/ -static inline void bond_set_mode_ops(struct bonding *bond, int mode); static void bond_send_gratuitous_arp(struct bonding *bond); /*---------------------------- General routines -----------------------------*/ -static const char *bond_mode_name(int mode) +const char *bond_mode_name(int mode) { switch (mode) { case BOND_MODE_ROUNDROBIN : @@ -1453,7 +1452,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond) * * Warning: Caller must hold curr_slave_lock for writing. */ -static void bond_change_active_slave(struct bonding *bond, struct slave *new_active) +void bond_change_active_slave(struct bonding *bond, struct slave *new_active) { struct slave *old_active = bond->curr_active_slave; @@ -1527,7 +1526,7 @@ static void bond_change_active_slave(struct bonding *bond, struct slave *new_act * * Warning: Caller must hold curr_slave_lock for writing. */ -static void bond_select_active_slave(struct bonding *bond) +void bond_select_active_slave(struct bonding *bond) { struct slave *best_slave; @@ -1595,7 +1594,7 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave) /*---------------------------------- IOCTL ----------------------------------*/ -static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev) { dprintk("bond_dev=%p\n", bond_dev); dprintk("slave_dev=%p\n", slave_dev); @@ -1635,7 +1634,7 @@ static int bond_compute_features(struct bonding *bond) } /* enslave device to bond device */ -static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) { struct bonding *bond = bond_dev->priv; struct slave *new_slave = NULL; @@ -2002,7 +2001,7 @@ err_undo_flags: * for Bonded connections: * The first up interface should be left on and all others downed. */ -static int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) +int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2403,7 +2402,7 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in /*-------------------------------- Monitoring -------------------------------*/ /* this function is called regularly to monitor each slave's link. */ -static void bond_mii_monitor(struct net_device *bond_dev) +void bond_mii_monitor(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2834,7 +2833,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond) * arp is transmitted to generate traffic. see activebackup_arp_monitor for * arp monitoring in active backup mode. */ -static void bond_loadbalance_arp_mon(struct net_device *bond_dev) +void bond_loadbalance_arp_mon(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave, *oldcurrent; @@ -2972,7 +2971,7 @@ out: * may have received. * see loadbalance_arp_monitor for arp monitoring in load balancing mode */ -static void bond_activebackup_arp_mon(struct net_device *bond_dev) +void bond_activebackup_arp_mon(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; struct slave *slave; @@ -4448,7 +4447,7 @@ out: /* * set bond mode specific net device operations */ -static inline void bond_set_mode_ops(struct bonding *bond, int mode) +void bond_set_mode_ops(struct bonding *bond, int mode) { struct net_device *bond_dev = bond->dev; @@ -4583,7 +4582,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par /* De-initialize device specific data. * Caller must hold rtnl_lock. */ -static inline void bond_deinit(struct net_device *bond_dev) +void bond_deinit(struct net_device *bond_dev) { struct bonding *bond = bond_dev->priv; @@ -4619,7 +4618,7 @@ static void bond_free_all(void) * Convert string input module parms. Accept either the * number of the mode or its string name. */ -static inline int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl) +int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl) { int i; diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index c8a873fe76c..96a733f2337 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -260,6 +260,18 @@ extern inline void bond_set_slave_active_flags(struct slave *slave) struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr); int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev); +void bond_deinit(struct net_device *bond_dev); +int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev); +int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); +int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev); +void bond_mii_monitor(struct net_device *bond_dev); +void bond_loadbalance_arp_mon(struct net_device *bond_dev); +void bond_activebackup_arp_mon(struct net_device *bond_dev); +void bond_set_mode_ops(struct bonding *bond, int mode); +int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl); +const char *bond_mode_name(int mode); +void bond_select_active_slave(struct bonding *bond); +void bond_change_active_slave(struct bonding *bond, struct slave *new_active); #endif /* _LINUX_BONDING_H */ -- cgit v1.2.3-70-g09d2 From dfe60397a62b1a5ebc7f05fd65463d3e29397677 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:04 -0800 Subject: [PATCH] bonding: move bond creation into separate function The sysfs interface can create bonds at runtime, so we need a separate function to do this, instead of just doing it in the module init code. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 113 ++++++++++++++++++++++------------------ drivers/net/bonding/bonding.h | 1 + 2 files changed, 62 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b8d617626c9..2475b76e10e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4898,81 +4898,90 @@ static int bond_check_params(struct bond_params *params) return 0; } +/* Create a new bond based on the specified name and bonding parameters. + * Caller must NOT hold rtnl_lock; we need to release it here before we + * set up our sysfs entries. + */ +int bond_create(char *name, struct bond_params *params, struct bonding **newbond) +{ + struct net_device *bond_dev; + int res; + + rtnl_lock(); + bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup); + if (!bond_dev) { + printk(KERN_ERR DRV_NAME + ": %s: eek! can't alloc netdev!\n", + name); + res = -ENOMEM; + goto out_rtnl; + } + + /* bond_init() must be called after dev_alloc_name() (for the + * /proc files), but before register_netdevice(), because we + * need to set function pointers. + */ + + res = bond_init(bond_dev, params); + if (res < 0) { + goto out_netdev; + } + + SET_MODULE_OWNER(bond_dev); + + res = register_netdevice(bond_dev); + if (res < 0) { + goto out_bond; + } + if (newbond) + *newbond = bond_dev->priv; + + rtnl_unlock(); /* allows sysfs registration of net device */ + goto done; +out_bond: + bond_deinit(bond_dev); +out_netdev: + free_netdev(bond_dev); +out_rtnl: + rtnl_unlock(); +done: + return res; +} + static int __init bonding_init(void) { - struct bond_params params; int i; int res; + char new_bond_name[8]; /* Enough room for 999 bonds at init. */ printk(KERN_INFO "%s", version); - res = bond_check_params(¶ms); + res = bond_check_params(&bonding_defaults); if (res) { - return res; + goto out; } - rtnl_lock(); - #ifdef CONFIG_PROC_FS bond_create_proc_dir(); #endif - for (i = 0; i < max_bonds; i++) { - struct net_device *bond_dev; - - bond_dev = alloc_netdev(sizeof(struct bonding), "", ether_setup); - if (!bond_dev) { - res = -ENOMEM; - goto out_err; - } - - res = dev_alloc_name(bond_dev, "bond%d"); - if (res < 0) { - free_netdev(bond_dev); - goto out_err; - } - - /* bond_init() must be called after dev_alloc_name() (for the - * /proc files), but before register_netdevice(), because we - * need to set function pointers. - */ - res = bond_init(bond_dev, ¶ms); - if (res < 0) { - free_netdev(bond_dev); - goto out_err; - } - - SET_MODULE_OWNER(bond_dev); - - res = register_netdevice(bond_dev); - if (res < 0) { - bond_deinit(bond_dev); - free_netdev(bond_dev); - goto out_err; - } + sprintf(new_bond_name, "bond%d",i); + res = bond_create(new_bond_name,&bonding_defaults, NULL); + if (res) + goto err; } - rtnl_unlock(); register_netdevice_notifier(&bond_netdev_notifier); register_inetaddr_notifier(&bond_inetaddr_notifier); - return 0; - -out_err: - /* - * rtnl_unlock() will run netdev_run_todo(), putting the - * thus-far-registered bonding devices into a state which - * unregigister_netdevice() will accept - */ - rtnl_unlock(); + goto out; +err: rtnl_lock(); - - /* free and unregister all bonds that were successfully added */ bond_free_all(); - rtnl_unlock(); - +out: return res; + } static void __exit bonding_exit(void) diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 96a733f2337..863605aab20 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -260,6 +260,7 @@ extern inline void bond_set_slave_active_flags(struct slave *slave) struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr); int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev); +int bond_create(char *name, struct bond_params *params, struct bonding **newbond); void bond_deinit(struct net_device *bond_dev); int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev); int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); -- cgit v1.2.3-70-g09d2 From 3c535952d86df83f817595068c9fd2b3cfbd3a4d Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:11 -0800 Subject: [PATCH] bonding: make bond_init not __init The sysfs interface can create bonds at runtime, and __init code goes away after module init. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2475b76e10e..73c9dd63e98 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4508,7 +4508,7 @@ static struct ethtool_ops bond_ethtool_ops = { * Does not allocate but creates a /proc entry. * Allowed to fail. */ -static int __init bond_init(struct net_device *bond_dev, struct bond_params *params) +static int bond_init(struct net_device *bond_dev, struct bond_params *params) { struct bonding *bond = bond_dev->priv; -- cgit v1.2.3-70-g09d2 From 6b780567223524cac86c745aeac425521cf37490 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:19 -0800 Subject: [PATCH] bonding: Allow ARP target table to have empty entries With the sysfs interface, the user can remove entries from the ARP table at runtime. The ARP monitor code now allows for empty entries in the table. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 73c9dd63e98..b656e53f462 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2729,7 +2729,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave) struct flowi fl; struct rtable *rt; - for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (!targets[i]) + continue; dprintk("basa: target %x\n", targets[i]); if (list_empty(&bond->vlan_list)) { dprintk("basa: empty vlan: arp_send\n"); -- cgit v1.2.3-70-g09d2 From 4756b02f558cbbbef5ae278fd3bbed778458c124 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:25 -0800 Subject: [PATCH] bonding: add ARP entries to /proc Make the /proc files show which ARP targets are in use by each bond. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b656e53f462..d5415ba9bdb 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3259,6 +3259,8 @@ static void bond_info_show_master(struct seq_file *seq) { struct bonding *bond = seq->private; struct slave *curr; + int i; + u32 target; read_lock(&bond->curr_slave_lock); curr = bond->curr_active_slave; @@ -3290,6 +3292,27 @@ static void bond_info_show_master(struct seq_file *seq) seq_printf(seq, "Down Delay (ms): %d\n", bond->params.downdelay * bond->params.miimon); + + /* ARP information */ + if(bond->params.arp_interval > 0) { + int printed=0; + seq_printf(seq, "ARP Polling Interval (ms): %d\n", + bond->params.arp_interval); + + seq_printf(seq, "ARP IP target/s (n.n.n.n form):"); + + for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) { + if (!bond->params.arp_targets[i]) + continue; + if (printed) + seq_printf(seq, ","); + target = ntohl(bond->params.arp_targets[i]); + seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target)); + printed = 1; + } + seq_printf(seq, "\n"); + } + if (bond->params.mode == BOND_MODE_8023AD) { struct ad_info ad_info; -- cgit v1.2.3-70-g09d2 From b76cdba9cdb29b091cacb4c11534ffb2eac02f64 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:41 -0800 Subject: [PATCH] bonding: add sysfs functionality to bonding (large) This large patch adds sysfs functionality to the channel bonding module. Bonds can be added, removed, and reconfigured at runtime without having to reload the module. Multiple bonds with different configurations are easily configured, and ifenslave is no longer required to configure bonds. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/Makefile | 2 +- drivers/net/bonding/bond_main.c | 23 +- drivers/net/bonding/bond_sysfs.c | 1399 ++++++++++++++++++++++++++++++++++++++ drivers/net/bonding/bonding.h | 7 + 4 files changed, 1429 insertions(+), 2 deletions(-) create mode 100644 drivers/net/bonding/bond_sysfs.c (limited to 'drivers') diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile index cf50384b469..5cdae2bc055 100644 --- a/drivers/net/bonding/Makefile +++ b/drivers/net/bonding/Makefile @@ -4,5 +4,5 @@ obj-$(CONFIG_BONDING) += bonding.o -bonding-objs := bond_main.o bond_3ad.o bond_alb.o +bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d5415ba9bdb..5ac9718c598 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -600,6 +600,7 @@ LIST_HEAD(bond_dev_list); static struct proc_dir_entry *bond_proc_dir = NULL; #endif +extern struct rw_semaphore bonding_rwsem; static u32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ; static int arp_ip_count = 0; static int bond_mode = BOND_MODE_ROUNDROBIN; @@ -1960,6 +1961,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) write_unlock_bh(&bond->lock); + res = bond_create_slave_symlinks(bond_dev, slave_dev); + if (res) + goto err_unset_master; + printk(KERN_INFO DRV_NAME ": %s: enslaving %s as a%s interface with a%s link.\n", bond_dev->name, slave_dev->name, @@ -2133,6 +2138,9 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) write_unlock_bh(&bond->lock); + /* must do this from outside any spinlocks */ + bond_destroy_slave_symlinks(bond_dev, slave_dev); + bond_del_vlans_from_slave(bond, slave_dev); /* If the mode USES_PRIMARY, then we should only remove its @@ -2224,6 +2232,7 @@ static int bond_release_all(struct net_device *bond_dev) */ write_unlock_bh(&bond->lock); + bond_destroy_slave_symlinks(bond_dev, slave_dev); bond_del_vlans_from_slave(bond, slave_dev); /* If the mode USES_PRIMARY, then we should only remove its @@ -3518,7 +3527,10 @@ static int bond_event_changename(struct bonding *bond) bond_remove_proc_entry(bond); bond_create_proc_entry(bond); #endif - + down_write(&(bonding_rwsem)); + bond_destroy_sysfs_entry(bond); + bond_create_sysfs_entry(bond); + up_write(&(bonding_rwsem)); return NOTIFY_DONE; } @@ -3995,6 +4007,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd return -EPERM; } + down_write(&(bonding_rwsem)); slave_dev = dev_get_by_name(ifr->ifr_slave); dprintk("slave_dev=%p: \n", slave_dev); @@ -4027,6 +4040,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd dev_put(slave_dev); } + up_write(&(bonding_rwsem)); return res; } @@ -4962,6 +4976,7 @@ int bond_create(char *name, struct bond_params *params, struct bonding **newbond *newbond = bond_dev->priv; rtnl_unlock(); /* allows sysfs registration of net device */ + res = bond_create_sysfs_entry(bond_dev->priv); goto done; out_bond: bond_deinit(bond_dev); @@ -4996,6 +5011,10 @@ static int __init bonding_init(void) goto err; } + res = bond_create_sysfs(); + if (res) + goto err; + register_netdevice_notifier(&bond_netdev_notifier); register_inetaddr_notifier(&bond_inetaddr_notifier); @@ -5003,6 +5022,7 @@ static int __init bonding_init(void) err: rtnl_lock(); bond_free_all(); + bond_destroy_sysfs(); rtnl_unlock(); out: return res; @@ -5016,6 +5036,7 @@ static void __exit bonding_exit(void) rtnl_lock(); bond_free_all(); + bond_destroy_sysfs(); rtnl_unlock(); } diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c new file mode 100644 index 00000000000..c5f1c52863c --- /dev/null +++ b/drivers/net/bonding/bond_sysfs.c @@ -0,0 +1,1399 @@ + +/* + * Copyright(c) 2004-2005 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * + * Changes: + * + * 2004/12/12 - Mitch Williams + * - Initial creation of sysfs interface. + * + * 2005/06/22 - Radheka Godse + * - Added ifenslave -c type functionality to sysfs + * - Added sysfs files for attributes such as MII Status and + * 802.3ad aggregator that are displayed in /proc + * - Added "name value" format to sysfs "mode" and + * "lacp_rate", for e.g., "active-backup 1" or "slow 0" for + * consistency and ease of script parsing + * - Fixed reversal of octets in arp_ip_targets via sysfs + * - sysfs support to handle bond interface re-naming + * - Moved all sysfs entries into /sys/class/net instead of + * of using a standalone subsystem. + * - Added sysfs symlinks between masters and slaves + * - Corrected bugs in sysfs unload path when creating bonds + * with existing interface names. + * - Removed redundant sysfs stat file since it duplicates slave info + * from the proc file + * - Fixed errors in sysfs show/store arp targets. + * - For consistency with ifenslave, instead of exiting + * with an error, updated bonding sysfs to + * close and attempt to enslave an up adapter. + * - Fixed NULL dereference when adding a slave interface + * that does not exist. + * - Added checks in sysfs bonding to reject invalid ip addresses + * - Synch up with post linux-2.6.12 bonding changes + * - Created sysfs bond attrib for xmit_hash_policy + * + * 2005/09/19 - Mitch Williams + * - Changed semantics of multi-item files to be command-based + * instead of list-based. + * - Changed ARP target handler to use in_aton instead of sscanf + * - Style changes. + * 2005/09/27 - Mitch Williams + * - Made line endings consistent. + * - Removed "none" from primary output - just put blank instead + * - Fixed bug with long interface names + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* #define BONDING_DEBUG 1 */ +#include "bonding.h" +#define to_class_dev(obj) container_of(obj,struct class_device,kobj) +#define to_net_dev(class) container_of(class, struct net_device, class_dev) +#define to_bond(cd) ((struct bonding *)(to_net_dev(cd)->priv)) + +/*---------------------------- Declarations -------------------------------*/ + + +extern struct list_head bond_dev_list; +extern struct bond_params bonding_defaults; +extern struct bond_parm_tbl bond_mode_tbl[]; +extern struct bond_parm_tbl bond_lacp_tbl[]; +extern struct bond_parm_tbl xmit_hashtype_tbl[]; + +static int expected_refcount = -1; +static struct class *netdev_class; +/*--------------------------- Data Structures -----------------------------*/ + +/* Bonding sysfs lock. Why can't we just use the subsytem lock? + * Because kobject_register tries to acquire the subsystem lock. If + * we already hold the lock (which we would if the user was creating + * a new bond through the sysfs interface), we deadlock. + * This lock is only needed when deleting a bond - we need to make sure + * that we don't collide with an ongoing ioctl. + */ + +struct rw_semaphore bonding_rwsem; + + + + +/*------------------------------ Functions --------------------------------*/ + +/* + * "show" function for the bond_masters attribute. + * The class parameter is ignored. + */ +static ssize_t bonding_show_bonds(struct class *cls, char *buffer) +{ + int res = 0; + struct bonding *bond; + + down_read(&(bonding_rwsem)); + + list_for_each_entry(bond, &bond_dev_list, bond_list) { + if (res > (PAGE_SIZE - IFNAMSIZ)) { + /* not enough space for another interface name */ + if ((PAGE_SIZE - res) > 10) + res = PAGE_SIZE - 10; + res += sprintf(buffer + res, "++more++"); + break; + } + res += sprintf(buffer + res, "%s ", + bond->dev->name); + } + res += sprintf(buffer + res, "\n"); + res++; + up_read(&(bonding_rwsem)); + return res; +} + +/* + * "store" function for the bond_masters attribute. This is what + * creates and deletes entire bonds. + * + * The class parameter is ignored. + * + */ + +static ssize_t bonding_store_bonds(struct class *cls, const char *buffer, size_t count) +{ + char command[IFNAMSIZ + 1] = {0, }; + char *ifname; + int res = count; + struct bonding *bond; + struct bonding *nxt; + + down_write(&(bonding_rwsem)); + sscanf(buffer, "%16s", command); /* IFNAMSIZ*/ + ifname = command + 1; + if ((strlen(command) <= 1) || + !dev_valid_name(ifname)) + goto err_no_cmd; + + if (command[0] == '+') { + + /* Check to see if the bond already exists. */ + list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) + if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) { + printk(KERN_ERR DRV_NAME + ": cannot add bond %s; it already exists\n", + ifname); + res = -EPERM; + goto out; + } + + printk(KERN_INFO DRV_NAME + ": %s is being created...\n", ifname); + if (bond_create(ifname, &bonding_defaults, &bond)) { + printk(KERN_INFO DRV_NAME + ": %s interface already exists. Bond creation failed.\n", + ifname); + res = -EPERM; + } + goto out; + } + + if (command[0] == '-') { + list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) + if (strnicmp(bond->dev->name, ifname, IFNAMSIZ) == 0) { + rtnl_lock(); + /* check the ref count on the bond's kobject. + * If it's > expected, then there's a file open, + * and we have to fail. + */ + if (atomic_read(&bond->dev->class_dev.kobj.kref.refcount) + > expected_refcount){ + rtnl_unlock(); + printk(KERN_INFO DRV_NAME + ": Unable remove bond %s due to open references.\n", + ifname); + res = -EPERM; + goto out; + } + printk(KERN_INFO DRV_NAME + ": %s is being deleted...\n", + bond->dev->name); + unregister_netdevice(bond->dev); + bond_deinit(bond->dev); + bond_destroy_sysfs_entry(bond); + rtnl_unlock(); + goto out; + } + + printk(KERN_ERR DRV_NAME + ": unable to delete non-existent bond %s\n", ifname); + res = -ENODEV; + goto out; + } + +err_no_cmd: + printk(KERN_ERR DRV_NAME + ": no command found in bonding_masters. Use +ifname or -ifname.\n"); + res = -EPERM; + + /* Always return either count or an error. If you return 0, you'll + * get called forever, which is bad. + */ +out: + up_write(&(bonding_rwsem)); + return res; +} +/* class attribute for bond_masters file. This ends up in /sys/class/net */ +static CLASS_ATTR(bonding_masters, S_IWUSR | S_IRUGO, + bonding_show_bonds, bonding_store_bonds); + +int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave) +{ + char linkname[IFNAMSIZ+7]; + int ret = 0; + + /* first, create a link from the slave back to the master */ + ret = sysfs_create_link(&(slave->class_dev.kobj), &(master->class_dev.kobj), + "master"); + if (ret) + return ret; + /* next, create a link from the master to the slave */ + sprintf(linkname,"slave_%s",slave->name); + ret = sysfs_create_link(&(master->class_dev.kobj), &(slave->class_dev.kobj), + linkname); + return ret; + +} + +void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave) +{ + char linkname[IFNAMSIZ+7]; + + sysfs_remove_link(&(slave->class_dev.kobj), "master"); + sprintf(linkname,"slave_%s",slave->name); + sysfs_remove_link(&(master->class_dev.kobj), linkname); +} + + +/* + * Show the slaves in the current bond. + */ +static ssize_t bonding_show_slaves(struct class_device *cd, char *buf) +{ + struct slave *slave; + int i, res = 0; + struct bonding *bond = to_bond(cd); + + read_lock_bh(&bond->lock); + bond_for_each_slave(bond, slave, i) { + if (res > (PAGE_SIZE - IFNAMSIZ)) { + /* not enough space for another interface name */ + if ((PAGE_SIZE - res) > 10) + res = PAGE_SIZE - 10; + res += sprintf(buf + res, "++more++"); + break; + } + res += sprintf(buf + res, "%s ", slave->dev->name); + } + read_unlock_bh(&bond->lock); + res += sprintf(buf + res, "\n"); + res++; + return res; +} + +/* + * Set the slaves in the current bond. The bond interface must be + * up for this to succeed. + * This function is largely the same flow as bonding_update_bonds(). + */ +static ssize_t bonding_store_slaves(struct class_device *cd, const char *buffer, size_t count) +{ + char command[IFNAMSIZ + 1] = { 0, }; + char *ifname; + int i, res, found, ret = count; + struct slave *slave; + struct net_device *dev = 0; + struct bonding *bond = to_bond(cd); + + /* Quick sanity check -- is the bond interface up? */ + if (!(bond->dev->flags & IFF_UP)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update slaves because interface is down.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + /* Note: We can't hold bond->lock here, as bond_create grabs it. */ + + sscanf(buffer, "%16s", command); /* IFNAMSIZ*/ + ifname = command + 1; + if ((strlen(command) <= 1) || + !dev_valid_name(ifname)) + goto err_no_cmd; + + if (command[0] == '+') { + + /* Got a slave name in ifname. Is it already in the list? */ + found = 0; + read_lock_bh(&bond->lock); + bond_for_each_slave(bond, slave, i) + if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + printk(KERN_ERR DRV_NAME + ": %s: Interface %s is already enslaved!\n", + bond->dev->name, ifname); + ret = -EPERM; + read_unlock_bh(&bond->lock); + goto out; + } + + read_unlock_bh(&bond->lock); + printk(KERN_INFO DRV_NAME ": %s: Adding slave %s.\n", + bond->dev->name, ifname); + dev = dev_get_by_name(ifname); + if (!dev) { + printk(KERN_INFO DRV_NAME + ": %s: Interface %s does not exist!\n", + bond->dev->name, ifname); + ret = -EPERM; + goto out; + } + else + dev_put(dev); + + if (dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": %s: Error: Unable to enslave %s " + "because it is already up.\n", + bond->dev->name, dev->name); + ret = -EPERM; + goto out; + } + /* If this is the first slave, then we need to set + the master's hardware address to be the same as the + slave's. */ + if (!(*((u32 *) & (bond->dev->dev_addr[0])))) { + memcpy(bond->dev->dev_addr, dev->dev_addr, + dev->addr_len); + } + + /* Set the slave's MTU to match the bond */ + if (dev->mtu != bond->dev->mtu) { + if (dev->change_mtu) { + res = dev->change_mtu(dev, + bond->dev->mtu); + if (res) { + ret = res; + goto out; + } + } else { + dev->mtu = bond->dev->mtu; + } + } + rtnl_lock(); + res = bond_enslave(bond->dev, dev); + rtnl_unlock(); + if (res) { + ret = res; + } + goto out; + } + + if (command[0] == '-') { + dev = NULL; + bond_for_each_slave(bond, slave, i) + if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { + dev = slave->dev; + break; + } + if (dev) { + printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n", + bond->dev->name, dev->name); + rtnl_lock(); + res = bond_release(bond->dev, dev); + rtnl_unlock(); + if (res) { + ret = res; + goto out; + } + /* set the slave MTU to the default */ + if (dev->change_mtu) { + dev->change_mtu(dev, 1500); + } else { + dev->mtu = 1500; + } + } + else { + printk(KERN_ERR DRV_NAME ": unable to remove non-existent slave %s for bond %s.\n", + ifname, bond->dev->name); + ret = -ENODEV; + } + goto out; + } + +err_no_cmd: + printk(KERN_ERR DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name); + ret = -EPERM; + +out: + return ret; +} + +static CLASS_DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves); + +/* + * Show and set the bonding mode. The bond interface must be down to + * change the mode. + */ +static ssize_t bonding_show_mode(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%s %d\n", + bond_mode_tbl[bond->params.mode].modename, + bond->params.mode) + 1; +} + +static ssize_t bonding_store_mode(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": unable to update mode of %s because interface is up.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, bond_mode_tbl); + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid mode value %.*s.\n", + bond->dev->name, + (int)strlen(buf) - 1, buf); + ret = -EINVAL; + goto out; + } else { + bond->params.mode = new_value; + bond_set_mode_ops(bond, bond->params.mode); + printk(KERN_INFO DRV_NAME ": %s: setting mode to %s (%d).\n", + bond->dev->name, bond_mode_tbl[new_value].modename, new_value); + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode); + +/* + * Show and set the bonding transmit hash method. The bond interface must be down to + * change the xmit hash policy. + */ +static ssize_t bonding_show_xmit_hash(struct class_device *cd, char *buf) +{ + int count; + struct bonding *bond = to_bond(cd); + + if ((bond->params.mode != BOND_MODE_XOR) && + (bond->params.mode != BOND_MODE_8023AD)) { + // Not Applicable + count = sprintf(buf, "NA\n") + 1; + } else { + count = sprintf(buf, "%s %d\n", + xmit_hashtype_tbl[bond->params.xmit_policy].modename, + bond->params.xmit_policy) + 1; + } + + return count; +} + +static ssize_t bonding_store_xmit_hash(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + "%s: Interface is up. Unable to update xmit policy.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if ((bond->params.mode != BOND_MODE_XOR) && + (bond->params.mode != BOND_MODE_8023AD)) { + printk(KERN_ERR DRV_NAME + "%s: Transmit hash policy is irrelevant in this mode.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, xmit_hashtype_tbl); + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid xmit hash policy value %.*s.\n", + bond->dev->name, + (int)strlen(buf) - 1, buf); + ret = -EINVAL; + goto out; + } else { + bond->params.xmit_policy = new_value; + bond_set_mode_ops(bond, bond->params.mode); + printk(KERN_INFO DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n", + bond->dev->name, xmit_hashtype_tbl[new_value].modename, new_value); + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash); + +/* + * Show and set the arp timer interval. There are two tricky bits + * here. First, if ARP monitoring is activated, then we must disable + * MII monitoring. Second, if the ARP timer isn't running, we must + * start it. + */ +static ssize_t bonding_show_arp_interval(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.arp_interval) + 1; +} + +static ssize_t bonding_store_arp_interval(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no arp_interval value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n", + bond->dev->name, new_value, INT_MAX); + ret = -EINVAL; + goto out; + } + + printk(KERN_INFO DRV_NAME + ": %s: Setting ARP monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.arp_interval = new_value; + if (bond->params.miimon) { + printk(KERN_INFO DRV_NAME + ": %s: ARP monitoring cannot be used with MII monitoring. " + "%s Disabling MII monitoring.\n", + bond->dev->name, bond->dev->name); + bond->params.miimon = 0; + /* Kill MII timer, else it brings bond's link down */ + if (bond->arp_timer.function) { + printk(KERN_INFO DRV_NAME + ": %s: Kill MII timer, else it brings bond's link down...\n", + bond->dev->name); + del_timer_sync(&bond->mii_timer); + } + } + if (!bond->params.arp_targets[0]) { + printk(KERN_INFO DRV_NAME + ": %s: ARP monitoring has been set up, " + "but no ARP targets have been specified.\n", + bond->dev->name); + } + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the ARP timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (bond->arp_timer.function) { + /* The timer's already set up, so fire it off */ + mod_timer(&bond->arp_timer, jiffies + 1); + } else { + /* Set up the timer. */ + init_timer(&bond->arp_timer); + bond->arp_timer.expires = jiffies + 1; + bond->arp_timer.data = + (unsigned long) bond->dev; + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { + bond->arp_timer.function = + (void *) + &bond_activebackup_arp_mon; + } else { + bond->arp_timer.function = + (void *) + &bond_loadbalance_arp_mon; + } + add_timer(&bond->arp_timer); + } + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval); + +/* + * Show and set the arp targets. + */ +static ssize_t bonding_show_arp_targets(struct class_device *cd, char *buf) +{ + int i, res = 0; + struct bonding *bond = to_bond(cd); + + for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) { + if (bond->params.arp_targets[i]) + res += sprintf(buf + res, "%u.%u.%u.%u ", + NIPQUAD(bond->params.arp_targets[i])); + } + if (res) + res--; /* eat the leftover space */ + res += sprintf(buf + res, "\n"); + res++; + return res; +} + +static ssize_t bonding_store_arp_targets(struct class_device *cd, const char *buf, size_t count) +{ + u32 newtarget; + int i = 0, done = 0, ret = count; + struct bonding *bond = to_bond(cd); + u32 *targets; + + targets = bond->params.arp_targets; + newtarget = in_aton(buf + 1); + /* look for adds */ + if (buf[0] == '+') { + if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) { + printk(KERN_ERR DRV_NAME + ": %s: invalid ARP target %u.%u.%u.%u specified for addition\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + /* look for an empty slot to put the target in, and check for dupes */ + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (targets[i] == newtarget) { /* duplicate */ + printk(KERN_ERR DRV_NAME + ": %s: ARP target %u.%u.%u.%u is already present\n", + bond->dev->name, NIPQUAD(newtarget)); + if (done) + targets[i] = 0; + ret = -EINVAL; + goto out; + } + if (targets[i] == 0 && !done) { + printk(KERN_INFO DRV_NAME + ": %s: adding ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + done = 1; + targets[i] = newtarget; + } + } + if (!done) { + printk(KERN_ERR DRV_NAME + ": %s: ARP target table is full!\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + + } + else if (buf[0] == '-') { + if ((newtarget == 0) || (newtarget == INADDR_BROADCAST)) { + printk(KERN_ERR DRV_NAME + ": %s: invalid ARP target %d.%d.%d.%d specified for removal\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + + for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { + if (targets[i] == newtarget) { + printk(KERN_INFO DRV_NAME + ": %s: removing ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + targets[i] = 0; + done = 1; + } + } + if (!done) { + printk(KERN_INFO DRV_NAME + ": %s: unable to remove nonexistent ARP target %d.%d.%d.%d.\n", + bond->dev->name, NIPQUAD(newtarget)); + ret = -EINVAL; + goto out; + } + } + else { + printk(KERN_ERR DRV_NAME ": no command found in arp_ip_targets file for bond %s. Use + or -.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets); + +/* + * Show and set the up and down delays. These must be multiples of the + * MII monitoring value, and are stored internally as the multiplier. + * Thus, we must translate to MS for the real world. + */ +static ssize_t bonding_show_downdelay(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon) + 1; +} + +static ssize_t bonding_store_downdelay(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (!(bond->params.miimon)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to set down delay as MII monitoring is disabled\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no down delay value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + if ((new_value % bond->params.miimon) != 0) { + printk(KERN_WARNING DRV_NAME + ": %s: Warning: down delay (%d) is not a multiple " + "of miimon (%d), delay rounded to %d ms\n", + bond->dev->name, new_value, bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); + } + bond->params.downdelay = new_value / bond->params.miimon; + printk(KERN_INFO DRV_NAME ": %s: Setting down delay to %d.\n", + bond->dev->name, bond->params.downdelay * bond->params.miimon); + + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay); + +static ssize_t bonding_show_updelay(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon) + 1; + +} + +static ssize_t bonding_store_updelay(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (!(bond->params.miimon)) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to set up delay as MII monitoring is disabled\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no up delay value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + if ((new_value % bond->params.miimon) != 0) { + printk(KERN_WARNING DRV_NAME + ": %s: Warning: up delay (%d) is not a multiple " + "of miimon (%d), updelay rounded to %d ms\n", + bond->dev->name, new_value, bond->params.miimon, + (new_value / bond->params.miimon) * + bond->params.miimon); + } + bond->params.updelay = new_value / bond->params.miimon; + printk(KERN_INFO DRV_NAME ": %s: Setting up delay to %d.\n", + bond->dev->name, bond->params.updelay * bond->params.miimon); + + } + +out: + return ret; +} +static CLASS_DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay); + +/* + * Show and set the LACP interval. Interface must be down, and the mode + * must be set to 802.3ad mode. + */ +static ssize_t bonding_show_lacp(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%s %d\n", + bond_lacp_tbl[bond->params.lacp_fast].modename, + bond->params.lacp_fast) + 1; +} + +static ssize_t bonding_store_lacp(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (bond->dev->flags & IFF_UP) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update LACP rate because interface is up.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + if (bond->params.mode != BOND_MODE_8023AD) { + printk(KERN_ERR DRV_NAME + ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n", + bond->dev->name); + ret = -EPERM; + goto out; + } + + new_value = bond_parse_parm((char *)buf, bond_lacp_tbl); + + if ((new_value == 1) || (new_value == 0)) { + bond->params.lacp_fast = new_value; + printk(KERN_INFO DRV_NAME + ": %s: Setting LACP rate to %s (%d).\n", + bond->dev->name, bond_lacp_tbl[new_value].modename, new_value); + } else { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid LACP rate value %.*s.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + ret = -EINVAL; + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp); + +/* + * Show and set the MII monitor interval. There are two tricky bits + * here. First, if MII monitoring is activated, then we must disable + * ARP monitoring. Second, if the timer isn't running, we must + * start it. + */ +static ssize_t bonding_show_miimon(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.miimon) + 1; +} + +static ssize_t bonding_store_miimon(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no miimon value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n", + bond->dev->name, new_value, 1, INT_MAX); + ret = -EINVAL; + goto out; + } else { + printk(KERN_INFO DRV_NAME + ": %s: Setting MII monitoring interval to %d.\n", + bond->dev->name, new_value); + bond->params.miimon = new_value; + if(bond->params.updelay) + printk(KERN_INFO DRV_NAME + ": %s: Note: Updating updelay (to %d) " + "since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.updelay * bond->params.miimon); + if(bond->params.downdelay) + printk(KERN_INFO DRV_NAME + ": %s: Note: Updating downdelay (to %d) " + "since it is a multiple of the miimon value.\n", + bond->dev->name, + bond->params.downdelay * bond->params.miimon); + if (bond->params.arp_interval) { + printk(KERN_INFO DRV_NAME + ": %s: MII monitoring cannot be used with " + "ARP monitoring. Disabling ARP monitoring...\n", + bond->dev->name); + bond->params.arp_interval = 0; + /* Kill ARP timer, else it brings bond's link down */ + if (bond->mii_timer.function) { + printk(KERN_INFO DRV_NAME + ": %s: Kill ARP timer, else it brings bond's link down...\n", + bond->dev->name); + del_timer_sync(&bond->arp_timer); + } + } + + if (bond->dev->flags & IFF_UP) { + /* If the interface is up, we may need to fire off + * the MII timer. If the interface is down, the + * timer will get fired off when the open function + * is called. + */ + if (bond->mii_timer.function) { + /* The timer's already set up, so fire it off */ + mod_timer(&bond->mii_timer, jiffies + 1); + } else { + /* Set up the timer. */ + init_timer(&bond->mii_timer); + bond->mii_timer.expires = jiffies + 1; + bond->mii_timer.data = + (unsigned long) bond->dev; + bond->mii_timer.function = + (void *) &bond_mii_monitor; + add_timer(&bond->mii_timer); + } + } + } +out: + return ret; +} +static CLASS_DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon); + +/* + * Show and set the primary slave. The store function is much + * simpler than bonding_store_slaves function because it only needs to + * handle one interface name. + * The bond must be a mode that supports a primary for this be + * set. + */ +static ssize_t bonding_show_primary(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->primary_slave) + count = sprintf(buf, "%s\n", bond->primary_slave->dev->name) + 1; + else + count = sprintf(buf, "\n") + 1; + + return count; +} + +static ssize_t bonding_store_primary(struct class_device *cd, const char *buf, size_t count) +{ + int i; + struct slave *slave; + struct bonding *bond = to_bond(cd); + + write_lock_bh(&bond->lock); + if (!USES_PRIMARY(bond->params.mode)) { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set primary slave; %s is in mode %d\n", + bond->dev->name, bond->dev->name, bond->params.mode); + } else { + bond_for_each_slave(bond, slave, i) { + if (strnicmp + (slave->dev->name, buf, + strlen(slave->dev->name)) == 0) { + printk(KERN_INFO DRV_NAME + ": %s: Setting %s as primary slave.\n", + bond->dev->name, slave->dev->name); + bond->primary_slave = slave; + bond_select_active_slave(bond); + goto out; + } + } + + /* if we got here, then we didn't match the name of any slave */ + + if (strlen(buf) == 0 || buf[0] == '\n') { + printk(KERN_INFO DRV_NAME + ": %s: Setting primary slave to None.\n", + bond->dev->name); + bond->primary_slave = 0; + bond_select_active_slave(bond); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set %.*s as primary slave as it is not a slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + } + } +out: + write_unlock_bh(&bond->lock); + return count; +} +static CLASS_DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary); + +/* + * Show and set the use_carrier flag. + */ +static ssize_t bonding_show_carrier(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%d\n", bond->params.use_carrier) + 1; +} + +static ssize_t bonding_store_carrier(struct class_device *cd, const char *buf, size_t count) +{ + int new_value, ret = count; + struct bonding *bond = to_bond(cd); + + + if (sscanf(buf, "%d", &new_value) != 1) { + printk(KERN_ERR DRV_NAME + ": %s: no use_carrier value specified.\n", + bond->dev->name); + ret = -EINVAL; + goto out; + } + if ((new_value == 0) || (new_value == 1)) { + bond->params.use_carrier = new_value; + printk(KERN_INFO DRV_NAME ": %s: Setting use_carrier to %d.\n", + bond->dev->name, new_value); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Ignoring invalid use_carrier value %d.\n", + bond->dev->name, new_value); + } +out: + return count; +} +static CLASS_DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier); + + +/* + * Show and set currently active_slave. + */ +static ssize_t bonding_show_active_slave(struct class_device *cd, char *buf) +{ + struct slave *curr; + struct bonding *bond = to_bond(cd); + int count; + + + read_lock(&bond->curr_slave_lock); + curr = bond->curr_active_slave; + read_unlock(&bond->curr_slave_lock); + + if (USES_PRIMARY(bond->params.mode) && curr) + count = sprintf(buf, "%s\n", curr->dev->name) + 1; + else + count = sprintf(buf, "\n") + 1; + return count; +} + +static ssize_t bonding_store_active_slave(struct class_device *cd, const char *buf, size_t count) +{ + int i; + struct slave *slave; + struct slave *old_active = NULL; + struct slave *new_active = NULL; + struct bonding *bond = to_bond(cd); + + write_lock_bh(&bond->lock); + if (!USES_PRIMARY(bond->params.mode)) { + printk(KERN_INFO DRV_NAME + ": %s: Unable to change active slave; %s is in mode %d\n", + bond->dev->name, bond->dev->name, bond->params.mode); + } else { + bond_for_each_slave(bond, slave, i) { + if (strnicmp + (slave->dev->name, buf, + strlen(slave->dev->name)) == 0) { + old_active = bond->curr_active_slave; + new_active = slave; + if (new_active && (new_active == old_active)) { + /* do nothing */ + printk(KERN_INFO DRV_NAME + ": %s: %s is already the current active slave.\n", + bond->dev->name, slave->dev->name); + goto out; + } + else { + if ((new_active) && + (old_active) && + (new_active->link == BOND_LINK_UP) && + IS_UP(new_active->dev)) { + printk(KERN_INFO DRV_NAME + ": %s: Setting %s as active slave.\n", + bond->dev->name, slave->dev->name); + bond_change_active_slave(bond, new_active); + } + else { + printk(KERN_INFO DRV_NAME + ": %s: Could not set %s as active slave; " + "either %s is down or the link is down.\n", + bond->dev->name, slave->dev->name, + slave->dev->name); + } + goto out; + } + } + } + + /* if we got here, then we didn't match the name of any slave */ + + if (strlen(buf) == 0 || buf[0] == '\n') { + printk(KERN_INFO DRV_NAME + ": %s: Setting active slave to None.\n", + bond->dev->name); + bond->primary_slave = 0; + bond_select_active_slave(bond); + } else { + printk(KERN_INFO DRV_NAME + ": %s: Unable to set %.*s as active slave as it is not a slave.\n", + bond->dev->name, (int)strlen(buf) - 1, buf); + } + } +out: + write_unlock_bh(&bond->lock); + return count; + +} +static CLASS_DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave); + + +/* + * Show link status of the bond interface. + */ +static ssize_t bonding_show_mii_status(struct class_device *cd, char *buf) +{ + struct slave *curr; + struct bonding *bond = to_bond(cd); + + read_lock(&bond->curr_slave_lock); + curr = bond->curr_active_slave; + read_unlock(&bond->curr_slave_lock); + + return sprintf(buf, "%s\n", (curr) ? "up" : "down") + 1; +} +static CLASS_DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL); + + +/* + * Show current 802.3ad aggregator ID. + */ +static ssize_t bonding_show_ad_aggregator(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.aggregator_id) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL); + + +/* + * Show number of active 802.3ad ports. + */ +static ssize_t bonding_show_ad_num_ports(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0: ad_info.ports) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL); + + +/* + * Show current 802.3ad actor key. + */ +static ssize_t bonding_show_ad_actor_key(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.actor_key) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL); + + +/* + * Show current 802.3ad partner key. + */ +static ssize_t bonding_show_ad_partner_key(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + count = sprintf(buf, "%d\n", (bond_3ad_get_active_agg_info(bond, &ad_info)) ? 0 : ad_info.partner_key) + 1; + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL); + + +/* + * Show current 802.3ad partner mac. + */ +static ssize_t bonding_show_ad_partner_mac(struct class_device *cd, char *buf) +{ + int count = 0; + struct bonding *bond = to_bond(cd); + + if (bond->params.mode == BOND_MODE_8023AD) { + struct ad_info ad_info; + if (!bond_3ad_get_active_agg_info(bond, &ad_info)) { + count = sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x\n", + ad_info.partner_system[0], + ad_info.partner_system[1], + ad_info.partner_system[2], + ad_info.partner_system[3], + ad_info.partner_system[4], + ad_info.partner_system[5]) + 1; + } + } + else + count = sprintf(buf, "\n") + 1; + + return count; +} +static CLASS_DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL); + + + +static struct attribute *per_bond_attrs[] = { + &class_device_attr_slaves.attr, + &class_device_attr_mode.attr, + &class_device_attr_arp_interval.attr, + &class_device_attr_arp_ip_target.attr, + &class_device_attr_downdelay.attr, + &class_device_attr_updelay.attr, + &class_device_attr_lacp_rate.attr, + &class_device_attr_xmit_hash_policy.attr, + &class_device_attr_miimon.attr, + &class_device_attr_primary.attr, + &class_device_attr_use_carrier.attr, + &class_device_attr_active_slave.attr, + &class_device_attr_mii_status.attr, + &class_device_attr_ad_aggregator.attr, + &class_device_attr_ad_num_ports.attr, + &class_device_attr_ad_actor_key.attr, + &class_device_attr_ad_partner_key.attr, + &class_device_attr_ad_partner_mac.attr, + NULL, +}; + +static struct attribute_group bonding_group = { + .name = "bonding", + .attrs = per_bond_attrs, +}; + +/* + * Initialize sysfs. This sets up the bonding_masters file in + * /sys/class/net. + */ +int bond_create_sysfs(void) +{ + int ret = 0; + struct bonding *firstbond; + + init_rwsem(&bonding_rwsem); + + /* get the netdev class pointer */ + firstbond = container_of(bond_dev_list.next, struct bonding, bond_list); + if (!firstbond) + return -ENODEV; + + netdev_class = firstbond->dev->class_dev.class; + if (!netdev_class) + return -ENODEV; + + ret = class_create_file(netdev_class, &class_attr_bonding_masters); + + return ret; + +} + +/* + * Remove /sys/class/net/bonding_masters. + */ +void bond_destroy_sysfs(void) +{ + if (netdev_class) + class_remove_file(netdev_class, &class_attr_bonding_masters); +} + +/* + * Initialize sysfs for each bond. This sets up and registers + * the 'bondctl' directory for each individual bond under /sys/class/net. + */ +int bond_create_sysfs_entry(struct bonding *bond) +{ + struct net_device *dev = bond->dev; + int err; + + err = sysfs_create_group(&(dev->class_dev.kobj), &bonding_group); + if (err) { + printk(KERN_EMERG "eek! didn't create group!\n"); + } + + if (expected_refcount < 1) + expected_refcount = atomic_read(&bond->dev->class_dev.kobj.kref.refcount); + + return err; +} +/* + * Remove sysfs entries for each bond. + */ +void bond_destroy_sysfs_entry(struct bonding *bond) +{ + struct net_device *dev = bond->dev; + + sysfs_remove_group(&(dev->class_dev.kobj), &bonding_group); +} + diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 863605aab20..903e60aa611 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -37,6 +37,7 @@ #include #include #include +#include #include "bond_3ad.h" #include "bond_alb.h" @@ -262,6 +263,12 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr) int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev); int bond_create(char *name, struct bond_params *params, struct bonding **newbond); void bond_deinit(struct net_device *bond_dev); +int bond_create_sysfs(void); +void bond_destroy_sysfs(void); +void bond_destroy_sysfs_entry(struct bonding *bond); +int bond_create_sysfs_entry(struct bonding *bond); +int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave); +void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave); int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev); int bond_release(struct net_device *bond_dev, struct net_device *slave_dev); int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev); -- cgit v1.2.3-70-g09d2 From 39755cad88f7b26dcb1edf9dcf14bd85f8fc2a3a Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:46 -0800 Subject: [PATCH] bonding: version update Update the version number for the bonding module. Since we've just added a significant new feature (sysfs support), bump the major number. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bonding.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 903e60aa611..88b8981d24b 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -41,8 +41,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "2.6.5" -#define DRV_RELDATE "November 4, 2005" +#define DRV_VERSION "3.0.0" +#define DRV_RELDATE "November 8, 2005" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" -- cgit v1.2.3-70-g09d2 From e944ef79184ff7f283e7bf79496d2873a0b0410b Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:50 -0800 Subject: [PATCH] bonding: spelling and whitespace corrections Minor spelling and whitespace corrections. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_alb.c | 2 +- drivers/net/bonding/bond_main.c | 1 + drivers/net/bonding/bonding.h | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 24f4a3d1499..9bd1e104554 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1417,7 +1417,7 @@ void bond_alb_monitor(struct bonding *bond) read_lock(&bond->curr_slave_lock); bond_for_each_slave(bond, slave, i) { - alb_send_learning_packets(slave,slave->dev->dev_addr); + alb_send_learning_packets(slave, slave->dev->dev_addr); } read_unlock(&bond->curr_slave_lock); diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5ac9718c598..c7cd6b96d2c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4125,6 +4125,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu) bond_for_each_slave(bond, slave, i) { dprintk("s %p s->p %p c_m %p\n", slave, slave->prev, slave->dev->change_mtu); + res = dev_set_mtu(slave->dev, new_mtu); if (res) { diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 88b8981d24b..ef4b11c4006 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -165,7 +165,7 @@ struct vlan_entry { }; struct slave { - struct net_device *dev; /* first - usefull for panic debug */ + struct net_device *dev; /* first - useful for panic debug */ struct slave *next; struct slave *prev; s16 delay; @@ -191,7 +191,7 @@ struct slave { * beforehand. */ struct bonding { - struct net_device *dev; /* first - usefull for panic debug */ + struct net_device *dev; /* first - useful for panic debug */ struct slave *first_slave; struct slave *curr_active_slave; struct slave *current_arp_slave; -- cgit v1.2.3-70-g09d2 From 691b73b13220886aefacb7c7f7ace7f528bbf800 Mon Sep 17 00:00:00 2001 From: Mitch Williams Date: Wed, 9 Nov 2005 10:36:57 -0800 Subject: [PATCH] bonding: comments and changelog Bonding source files still have changelogs in the comments. This, then, is an update to that changelog. Signed-off-by: Mitch Williams Acked-by: Jay Vosburgh Signed-off-by: John W. Linville --- drivers/net/bonding/bond_main.c | 22 ++++++++++++++++++++++ drivers/net/bonding/bonding.h | 4 ++++ 2 files changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c7cd6b96d2c..40ff79175c4 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -489,6 +489,28 @@ * Set version to 2.6.3. * 2005/09/26 - Jay Vosburgh * - Removed backwards compatibility for old ifenslaves. Version 2.6.4. + * 2005/09/27 - Mitch Williams + * - Radheka Godse + * - Split out bond creation code to allow for sysfs interface. + * - Removed static declaration on some functions and data items. + * - Added sysfs support, including capability to add/remove/change + * any bond at runtime. + * + * - Miscellaneous: + * - Added bonding: : prefix to sysfs log messages + * - Added arp_ip_targets to /proc entry + * - Allow ARP target table to have empty entries + * - trivial fix: added missing modes description to modinfo + * - Corrected bug in ALB init where kmalloc is called inside + * a held lock + * - Corrected behavior to maintain bond link when changing + * from arp monitor to miimon and vice versa + * - Added missing bonding: : prefix to alb, ad log messages + * - Fixed stack dump warnings seen if changing between miimon + * and arp monitoring when the bond interface is down. + * - Fixed stack dump warnings seen when enslaving an e100 + * driver + * - Set version to 3.0.0 */ //#define BONDING_DEBUG 1 diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index ef4b11c4006..d6d085480f2 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -29,6 +29,10 @@ * 2005/05/05 - Jason Gabler * - added "xmit_policy" kernel parameter for alternate hashing policy * support for mode 2 + * + * 2005/09/27 - Mitch Williams + * Radheka Godse + * - Added bonding sysfs interface */ #ifndef _LINUX_BONDING_H -- cgit v1.2.3-70-g09d2 From 1c24a412fd8873bcacba7ed8a1780d12b86b6cb5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 14 Nov 2005 18:20:23 -0500 Subject: [libata ata_piix] cleanup: remove duplicate ata_port_info records --- drivers/scsi/ata_piix.c | 40 +++++++--------------------------------- 1 file changed, 7 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 855428ff37e..7a1ed94492f 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -78,9 +78,7 @@ enum { ich5_sata = 1, piix4_pata = 2, ich6_sata = 3, - ich6_sata_rm = 4, - ich7_sata = 5, - esb2_sata = 6, + ich6_sata_ahci = 4, PIIX_AHCI_DEVICE = 6, }; @@ -111,11 +109,11 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, { 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata }, - { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm }, - { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm }, - { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata }, - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata }, - { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb2_sata }, + { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, { } /* terminate list */ }; @@ -258,31 +256,7 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, - /* ich6_sata_rm */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* ich7_sata */ - { - .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | - PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR | - ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &piix_sata_ops, - }, - - /* esb2_sata */ + /* ich6_sata_ahci */ { .sht = &piix_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST | -- cgit v1.2.3-70-g09d2 From c8ebd3a37f0e7a2aae337279d58a50c1a1fcd053 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 11 Nov 2005 20:44:21 +0100 Subject: [PATCH] drivers/net/sk98lin/skge.c: make SkPciWriteCfgDWord() a static inline No external user and that small - such a function should be static inline and not a global function. Signed-off-by: Adrian Bunk Signed-off-by: John W. Linville --- drivers/net/sk98lin/h/skvpd.h | 8 -------- drivers/net/sk98lin/skge.c | 43 +++++++++++++++++++++---------------------- 2 files changed, 21 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h index bdc1a5eaaae..daa9a8d154f 100644 --- a/drivers/net/sk98lin/h/skvpd.h +++ b/drivers/net/sk98lin/h/skvpd.h @@ -130,14 +130,12 @@ typedef struct s_vpd_key { #ifndef VPD_DO_IO #define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) #define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) -#define VPD_OUT32(pAC,IoC,Addr,Val) (void)SkPciWriteCfgDWord(pAC,Addr,Val) #define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) #define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) #define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) #else /* VPD_DO_IO */ #define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) #define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) -#define VPD_OUT32(pAC,IoC,Addr,Val) SK_OUT32(IoC,PCI_C(Addr),Val) #define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) #define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) #define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) @@ -155,12 +153,6 @@ typedef struct s_vpd_key { else \ SK_OUT16(pAC,PCI_C(Addr),Val); \ } -#define VPD_OUT32(pAC,Ioc,Addr,Val) { \ - if ((pAC)->DgT.DgUseCfgCycle) \ - SkPciWriteCfgDWord(pAC,Addr,Val); \ - else \ - SK_OUT32(pAC,PCI_C(Addr),Val); \ - } #define VPD_IN8(pAC,Ioc,Addr,pVal) { \ if ((pAC)->DgT.DgUseCfgCycle) \ SkPciReadCfgByte(pAC,Addr,pVal); \ diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index b18c92cb629..08906ef3ff7 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -277,6 +277,27 @@ extern struct ethtool_ops SkGeEthtoolOps; static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}}; static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; +/***************************************************************************** + * + * SkPciWriteCfgDWord - write a 32 bit value to pci config space + * + * Description: + * This routine writes a 32 bit value to the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static inline int SkPciWriteCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 Val) /* pointer to store the read value */ +{ + pci_write_config_dword(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgDWord */ + /***************************************************************************** * * SkGeInitPCI - Init the PCI resources @@ -4083,28 +4104,6 @@ SK_U8 *pVal) /* pointer to store the read value */ } /* SkPciReadCfgByte */ -/***************************************************************************** - * - * SkPciWriteCfgDWord - write a 32 bit value to pci config space - * - * Description: - * This routine writes a 32 bit value to the pci configuration - * space. - * - * Returns: - * 0 - indicate everything worked ok. - * != 0 - error indication - */ -int SkPciWriteCfgDWord( -SK_AC *pAC, /* Adapter Control structure pointer */ -int PciAddr, /* PCI register address */ -SK_U32 Val) /* pointer to store the read value */ -{ - pci_write_config_dword(pAC->PciDev, PciAddr, Val); - return(0); -} /* SkPciWriteCfgDWord */ - - /***************************************************************************** * * SkPciWriteCfgWord - write a 16 bit value to pci config space -- cgit v1.2.3-70-g09d2 From 9a648f3c535cb6b24a5f0538d032aea9a33ec515 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Sun, 13 Nov 2005 00:33:32 -0500 Subject: [PATCH] skge: fix warning from inlining SkPciWriteCfgDWord() Making SkPciWriteCfgDWord a static inline produces a warning due to a forward declaration in skdrv2nd.h. This patch removes that declaration. Signed-off-by: John W. Linville --- drivers/net/sk98lin/h/skdrv2nd.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 542cec57f86..c0bfce5a465 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -60,7 +60,6 @@ extern SK_U64 SkOsGetTime(SK_AC*); extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); -extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32); extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); -- cgit v1.2.3-70-g09d2 From c1120b22499d7e13e5cd2349cb2168b76d0edaca Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sat, 12 Nov 2005 23:46:43 +0300 Subject: [PATCH] Remove drivers/net/wan/lmc/lmc_prot.h "grep "lmc_prot\." -r ." didn't show anything. lmc_proto.h seems to have the correct prototypes, and is actually used. Signed-off-by: Tobias Klauser Signed-off-by: Alexey Dobriyan Signed-off-by: John W. Linville --- drivers/net/wan/lmc/lmc_prot.h | 15 --------------- 1 file changed, 15 deletions(-) delete mode 100644 drivers/net/wan/lmc/lmc_prot.h (limited to 'drivers') diff --git a/drivers/net/wan/lmc/lmc_prot.h b/drivers/net/wan/lmc/lmc_prot.h deleted file mode 100644 index f3b1df9e2cd..00000000000 --- a/drivers/net/wan/lmc/lmc_prot.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _LMC_PROTO_H_ -#define _LMC_PROTO_H_ - -void lmc_proto_init(lmc_softc_t * const) -void lmc_proto_attach(lmc_softc_t *sc const) -void lmc_proto_detach(lmc_softc *sc const) -void lmc_proto_reopen(lmc_softc_t *sc const) -int lmc_proto_ioctl(lmc_softc_t *sc const, struct ifreq *ifr, int cmd) -void lmc_proto_open(lmc_softc_t *sc const) -void lmc_proto_close(lmc_softc_t *sc const) -unsigned short lmc_proto_type(lmc_softc_t *sc const, struct skbuff *skb) - - -#endif - -- cgit v1.2.3-70-g09d2 From 4d791aadf63c9d605bc9a4144e79d5756fc29fb3 Mon Sep 17 00:00:00 2001 From: Carlo Perassi Date: Sun, 13 Nov 2005 15:02:15 +0300 Subject: [PATCH] atmel: CodingStyle cleanup Reading this driver I noticed some trailing whitespaces and tabs so I removed them with some 80th column fitting and a few more similar things. Signed-off-by: Carlo Perassi Signed-off-by: Alexey Dobriyan Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 1487 +++++++++++++++++++++--------------------- 1 file changed, 759 insertions(+), 728 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 5e53c5258a3..050aa518d7d 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -5,9 +5,9 @@ Copyright 2000-2001 ATMEL Corporation. Copyright 2003-2004 Simon Kelley. - This code was developed from version 2.1.1 of the Atmel drivers, - released by Atmel corp. under the GPL in December 2002. It also - includes code from the Linux aironet drivers (C) Benjamin Reed, + This code was developed from version 2.1.1 of the Atmel drivers, + released by Atmel corp. under the GPL in December 2002. It also + includes code from the Linux aironet drivers (C) Benjamin Reed, and the Linux PCMCIA package, (C) David Hinds and the Linux wireless extensions, (C) Jean Tourrilhes. @@ -31,7 +31,7 @@ along with Atmel wireless lan drivers; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - For all queries about this code, please contact the current author, + For all queries about this code, please contact the current author, Simon Kelley and not Atmel Corporation. Credit is due to HP UK and Cambridge Online Systems Ltd for supplying @@ -79,13 +79,13 @@ MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.") MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards"); -/* The name of the firmware file to be loaded +/* The name of the firmware file to be loaded over-rides any automatic selection */ static char *firmware = NULL; module_param(firmware, charp, 0); /* table of firmware file names */ -static struct { +static struct { AtmelFWType fw_type; const char *fw_file; const char *fw_file_ext; @@ -104,17 +104,17 @@ static struct { #define MAX_SSID_LENGTH 32 #define MGMT_JIFFIES (256 * HZ / 100) -#define MAX_BSS_ENTRIES 64 +#define MAX_BSS_ENTRIES 64 /* registers */ -#define GCR 0x00 // (SIR0) General Configuration Register -#define BSR 0x02 // (SIR1) Bank Switching Select Register +#define GCR 0x00 // (SIR0) General Configuration Register +#define BSR 0x02 // (SIR1) Bank Switching Select Register #define AR 0x04 #define DR 0x08 -#define MR1 0x12 // Mirror Register 1 -#define MR2 0x14 // Mirror Register 2 -#define MR3 0x16 // Mirror Register 3 -#define MR4 0x18 // Mirror Register 4 +#define MR1 0x12 // Mirror Register 1 +#define MR2 0x14 // Mirror Register 2 +#define MR3 0x16 // Mirror Register 3 +#define MR4 0x18 // Mirror Register 4 #define GPR1 0x0c #define GPR2 0x0e @@ -123,9 +123,9 @@ static struct { // Constants for the GCR register. // #define GCR_REMAP 0x0400 // Remap internal SRAM to 0 -#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset) +#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset) #define GCR_CORES 0x0060 // Core Reset (ARM and PAI are reset) -#define GCR_ENINT 0x0002 // Enable Interrupts +#define GCR_ENINT 0x0002 // Enable Interrupts #define GCR_ACKINT 0x0008 // Acknowledge Interrupts #define BSS_SRAM 0x0200 // AMBA module selection --> SRAM @@ -190,7 +190,7 @@ struct rx_desc { u32 Next; u16 MsduPos; u16 MsduSize; - + u8 State; u8 Status; u8 Rate; @@ -199,7 +199,6 @@ struct rx_desc { u8 PreambleType; u16 Duration; u32 RxTime; - }; #define RX_DESC_FLAG_VALID 0x80 @@ -218,16 +217,15 @@ struct rx_desc { #define RX_DESC_DURATION_OFFSET 14 #define RX_DESC_RX_TIME_OFFSET 16 - struct tx_desc { u32 NextDescriptor; u16 TxStartOfFrame; u16 TxLength; - + u8 TxState; u8 TxStatus; u8 RetryCount; - + u8 TxRate; u8 KeyIndex; @@ -238,10 +236,8 @@ struct tx_desc { u8 Reserved; u8 PacketType; u16 HostTxLength; - }; - #define TX_DESC_NEXT_OFFSET 0 #define TX_DESC_POS_OFFSET 4 #define TX_DESC_SIZE_OFFSET 6 @@ -255,8 +251,6 @@ struct tx_desc { #define TX_DESC_PACKET_TYPE_OFFSET 17 #define TX_DESC_HOST_LENGTH_OFFSET 18 - - /////////////////////////////////////////////////////// // Host-MAC interface /////////////////////////////////////////////////////// @@ -266,7 +260,6 @@ struct tx_desc { #define TX_FIRM_OWN 0x80 #define TX_DONE 0x40 - #define TX_ERROR 0x01 #define TX_PACKET_TYPE_DATA 0x01 @@ -280,8 +273,7 @@ struct tx_desc { #define ISR_COMMAND_COMPLETE 0x10 // command completed #define ISR_OUT_OF_RANGE 0x20 // command completed #define ISR_IBSS_MERGE 0x40 // (4.1.2.30): IBSS merge -#define ISR_GENERIC_IRQ 0x80 - +#define ISR_GENERIC_IRQ 0x80 #define Local_Mib_Type 0x01 #define Mac_Address_Mib_Type 0x02 @@ -317,7 +309,6 @@ struct tx_desc { #define LOCAL_MIB_PREAMBLE_TYPE 9 #define MAC_ADDR_MIB_MAC_ADDR_POS 0 - #define CMD_Set_MIB_Vars 0x01 #define CMD_Get_MIB_Vars 0x02 #define CMD_Scan 0x03 @@ -338,7 +329,6 @@ struct tx_desc { #define CMD_STATUS_HOST_ERROR 0xFF #define CMD_STATUS_BUSY 0xFE - #define CMD_BLOCK_COMMAND_OFFSET 0 #define CMD_BLOCK_STATUS_OFFSET 1 #define CMD_BLOCK_PARAMETERS_OFFSET 4 @@ -347,15 +337,15 @@ struct tx_desc { #define MGMT_FRAME_BODY_OFFSET 24 #define MAX_AUTHENTICATION_RETRIES 3 -#define MAX_ASSOCIATION_RETRIES 3 +#define MAX_ASSOCIATION_RETRIES 3 #define AUTHENTICATION_RESPONSE_TIME_OUT 1000 #define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */ #define LOOP_RETRY_LIMIT 500000 -#define ACTIVE_MODE 1 -#define PS_MODE 2 +#define ACTIVE_MODE 1 +#define PS_MODE 2 #define MAX_ENCRYPTION_KEYS 4 #define MAX_ENCRYPTION_KEY_SIZE 40 @@ -377,7 +367,7 @@ struct tx_desc { #define REG_DOMAIN_MKK1 0x41 //Channel 1-14 Japan(MKK1) #define REG_DOMAIN_ISRAEL 0x50 //Channel 3-9 ISRAEL -#define BSS_TYPE_AD_HOC 1 +#define BSS_TYPE_AD_HOC 1 #define BSS_TYPE_INFRASTRUCTURE 2 #define SCAN_TYPE_ACTIVE 0 @@ -389,7 +379,7 @@ struct tx_desc { #define DATA_FRAME_WS_HEADER_SIZE 30 -/* promiscuous mode control */ +/* promiscuous mode control */ #define PROM_MODE_OFF 0x0 #define PROM_MODE_UNKNOWN 0x1 #define PROM_MODE_CRC_FAILED 0x2 @@ -398,8 +388,7 @@ struct tx_desc { #define PROM_MODE_CTRL 0x10 #define PROM_MODE_BAD_PROTOCOL 0x20 - -#define IFACE_INT_STATUS_OFFSET 0 +#define IFACE_INT_STATUS_OFFSET 0 #define IFACE_INT_MASK_OFFSET 1 #define IFACE_LOCKOUT_HOST_OFFSET 2 #define IFACE_LOCKOUT_MAC_OFFSET 3 @@ -407,7 +396,7 @@ struct tx_desc { #define IFACE_MAC_STAT_OFFSET 30 #define IFACE_GENERIC_INT_TYPE_OFFSET 32 -#define CIPHER_SUITE_NONE 0 +#define CIPHER_SUITE_NONE 0 #define CIPHER_SUITE_WEP_64 1 #define CIPHER_SUITE_TKIP 2 #define CIPHER_SUITE_AES 3 @@ -419,11 +408,11 @@ struct tx_desc { // // -// FuncCtrl field: +// FuncCtrl field: // #define FUNC_CTRL_TxENABLE 0x10 #define FUNC_CTRL_RxENABLE 0x20 -#define FUNC_CTRL_INIT_COMPLETE 0x01 +#define FUNC_CTRL_INIT_COMPLETE 0x01 /* A stub firmware image which reads the MAC address from NVRAM on the card. For copyright information and source see the end of this file. */ @@ -486,10 +475,10 @@ struct atmel_private { struct net_device_stats stats; // device stats spinlock_t irqlock, timerlock; // spinlocks enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type; - enum { - CARD_TYPE_PARALLEL_FLASH, + enum { + CARD_TYPE_PARALLEL_FLASH, CARD_TYPE_SPI_FLASH, - CARD_TYPE_EEPROM + CARD_TYPE_EEPROM } card_type; int do_rx_crc; /* If we need to CRC incoming packets */ int probe_crc; /* set if we don't yet know */ @@ -497,18 +486,18 @@ struct atmel_private { u16 rx_desc_head; u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous; u16 tx_free_mem, tx_buff_head, tx_buff_tail; - + u16 frag_seq, frag_len, frag_no; - u8 frag_source[6]; - + u8 frag_source[6]; + u8 wep_is_on, default_key, exclude_unencrypted, encryption_level; u8 group_cipher_suite, pairwise_cipher_suite; u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; - int wep_key_len[MAX_ENCRYPTION_KEYS]; + int wep_key_len[MAX_ENCRYPTION_KEYS]; int use_wpa, radio_on_broken; /* firmware dependent stuff. */ u16 host_info_base; - struct host_info_struct { + struct host_info_struct { /* NB this is matched to the hardware, don't change. */ u8 volatile int_status; u8 volatile int_mask; @@ -524,20 +513,20 @@ struct atmel_private { u16 rx_buff_size; u16 rx_desc_pos; u16 rx_desc_count; - + u16 build_version; - u16 command_pos; - + u16 command_pos; + u16 major_version; u16 minor_version; - + u16 func_ctrl; u16 mac_status; u16 generic_IRQ_type; u8 reserved[2]; } host_info; - enum { + enum { STATION_STATE_SCANNING, STATION_STATE_JOINNING, STATION_STATE_AUTHENTICATING, @@ -547,7 +536,7 @@ struct atmel_private { STATION_STATE_DOWN, STATION_STATE_MGMT_ERROR } station_state; - + int operating_mode, power_mode; time_t last_qual; int beacons_this_sec; @@ -560,18 +549,18 @@ struct atmel_private { int long_retry, short_retry; int preamble; int default_beacon_period, beacon_period, listen_interval; - int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum; + int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum; int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt; enum { SITE_SURVEY_IDLE, SITE_SURVEY_IN_PROGRESS, - SITE_SURVEY_COMPLETED + SITE_SURVEY_COMPLETED } site_survey_state; time_t last_survey; int station_was_associated, station_is_associated; int fast_scan; - + struct bss_info { int channel; int SSIDsize; @@ -584,13 +573,12 @@ struct atmel_private { u8 SSID[MAX_SSID_LENGTH]; } BSSinfo[MAX_BSS_ENTRIES]; int BSS_list_entries, current_BSS; - int connect_to_any_BSS; + int connect_to_any_BSS; int SSID_size, new_SSID_size; u8 CurrentBSSID[6], BSSID[6]; u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH]; u64 last_beacon_timestamp; u8 rx_buf[MAX_WIRELESS_BODY]; - }; static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16}; @@ -598,39 +586,49 @@ static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16}; static const struct { int reg_domain; int min, max; - char *name; + char *name; } channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" }, { REG_DOMAIN_DOC, 1, 11, "Canada" }, { REG_DOMAIN_ETSI, 1, 13, "Europe" }, { REG_DOMAIN_SPAIN, 10, 11, "Spain" }, - { REG_DOMAIN_FRANCE, 10, 13, "France" }, + { REG_DOMAIN_FRANCE, 10, 13, "France" }, { REG_DOMAIN_MKK, 14, 14, "MKK" }, { REG_DOMAIN_MKK1, 1, 14, "MKK1" }, { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} }; static void build_wpa_mib(struct atmel_private *priv); static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len); -static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len); +static void atmel_copy_to_card(struct net_device *dev, u16 dest, + unsigned char *src, u16 len); +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, + u16 src, u16 len); static void atmel_set_gcr(struct net_device *dev, u16 mask); static void atmel_clear_gcr(struct net_device *dev, u16 mask); static int atmel_lock_mac(struct atmel_private *priv); static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data); static void atmel_command_irq(struct atmel_private *priv); static int atmel_validate_channel(struct atmel_private *priv, int channel); -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, +static void atmel_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 frame_len, u8 rssi); static void atmel_management_timer(u_long a); -static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size); -static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, +static void atmel_send_command(struct atmel_private *priv, int command, + void *cmd, int cmd_size); +static int atmel_send_command_wait(struct atmel_private *priv, int command, + void *cmd, int cmd_size); +static void atmel_transmit_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u8 *body, int body_len); static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index); -static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data); -static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data); -static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); -static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len); +static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, + u8 data); +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, + u16 data); +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len); +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len); static void atmel_scan(struct atmel_private *priv, int specific_ssid); static void atmel_join_bss(struct atmel_private *priv, int bss_index); static void atmel_smooth_qual(struct atmel_private *priv); @@ -650,12 +648,12 @@ static inline u16 atmel_co(struct atmel_private *priv, u16 offset) return priv->host_info.command_pos + offset; } -static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc) +static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc) { return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset; } -static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc) +static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc) { return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset; } @@ -682,25 +680,25 @@ static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data) static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); return atmel_read8(priv->dev, DR); } static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write8(priv->dev, DR, data); } static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); return atmel_read16(priv->dev, DR); } static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write16(priv->dev, DR, data); } @@ -710,11 +708,10 @@ static void tx_done_irq(struct atmel_private *priv) { int i; - for (i = 0; + for (i = 0; atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE && i < priv->host_info.tx_desc_count; i++) { - u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head)); u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head)); u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head)); @@ -728,16 +725,16 @@ static void tx_done_irq(struct atmel_private *priv) priv->tx_buff_head = 0; else priv->tx_buff_head += msdu_size; - + if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1)) - priv->tx_desc_head++ ; + priv->tx_desc_head++ ; else priv->tx_desc_head = 0; - + if (type == TX_PACKET_TYPE_DATA) { if (status == TX_STATUS_SUCCESS) priv->stats.tx_packets++; - else + else priv->stats.tx_errors++; netif_wake_queue(priv->dev); } @@ -748,21 +745,22 @@ static u16 find_tx_buff(struct atmel_private *priv, u16 len) { u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail; - if (priv->tx_desc_free == 3 || priv->tx_free_mem < len) + if (priv->tx_desc_free == 3 || priv->tx_free_mem < len) return 0; - + if (bottom_free >= len) return priv->host_info.tx_buff_pos + priv->tx_buff_tail; - + if (priv->tx_free_mem - bottom_free >= len) { priv->tx_buff_tail = 0; return priv->host_info.tx_buff_pos; } - + return 0; } -static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 len, u16 buff, u8 type) +static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, + u16 len, u16 buff, u8 type) { atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len); @@ -775,8 +773,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l int cipher_type, cipher_length; if (is_bcast) { cipher_type = priv->group_cipher_suite; - if (cipher_type == CIPHER_SUITE_WEP_64 || - cipher_type == CIPHER_SUITE_WEP_128 ) + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128) cipher_length = 8; else if (cipher_type == CIPHER_SUITE_TKIP) cipher_length = 12; @@ -790,8 +788,8 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l } } else { cipher_type = priv->pairwise_cipher_suite; - if (cipher_type == CIPHER_SUITE_WEP_64 || - cipher_type == CIPHER_SUITE_WEP_128 ) + if (cipher_type == CIPHER_SUITE_WEP_64 || + cipher_type == CIPHER_SUITE_WEP_128) cipher_length = 8; else if (cipher_type == CIPHER_SUITE_TKIP) cipher_length = 12; @@ -804,9 +802,9 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l cipher_length = 0; } } - + atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail), - cipher_type); + cipher_type); atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail), cipher_length); } @@ -815,46 +813,46 @@ static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 l if (priv->tx_desc_previous != priv->tx_desc_tail) atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0); priv->tx_desc_previous = priv->tx_desc_tail; - if (priv->tx_desc_tail < (priv->host_info.tx_desc_count -1 )) + if (priv->tx_desc_tail < (priv->host_info.tx_desc_count - 1)) priv->tx_desc_tail++; else priv->tx_desc_tail = 0; priv->tx_desc_free--; priv->tx_free_mem -= len; - } -static int start_tx (struct sk_buff *skb, struct net_device *dev) +static int start_tx(struct sk_buff *skb, struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); struct ieee80211_hdr_4addr header; unsigned long flags; u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN; u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; - - if (priv->card && priv->present_callback && + + if (priv->card && priv->present_callback && !(*priv->present_callback)(priv->card)) { priv->stats.tx_errors++; dev_kfree_skb(skb); return 0; } - + if (priv->station_state != STATION_STATE_READY) { priv->stats.tx_errors++; dev_kfree_skb(skb); return 0; } - + /* first ensure the timer func cannot run */ - spin_lock_bh(&priv->timerlock); + spin_lock_bh(&priv->timerlock); /* then stop the hardware ISR */ - spin_lock_irqsave(&priv->irqlock, flags); + spin_lock_irqsave(&priv->irqlock, flags); /* nb doing the above in the opposite order will deadlock */ - + /* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the - 12 first bytes (containing DA/SA) and put them in the appropriate fields of - the Wireless Header. Thus the packet length is then the initial + 18 (+30-12) */ - + 12 first bytes (containing DA/SA) and put them in the appropriate + fields of the Wireless Header. Thus the packet length is then the + initial + 18 (+30-12) */ + if (!(buff = find_tx_buff(priv, len + 18))) { priv->stats.tx_dropped++; spin_unlock_irqrestore(&priv->irqlock, flags); @@ -862,7 +860,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); return 1; } - + frame_ctl = IEEE80211_FTYPE_DATA; header.duration_id = 0; header.seq_ctl = 0; @@ -878,7 +876,7 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) memcpy(&header.addr2, dev->dev_addr, 6); memcpy(&header.addr3, skb->data, 6); } - + if (priv->use_wpa) memcpy(&header.addr4, SNAP_RFC1024, 6); @@ -888,27 +886,27 @@ static int start_tx (struct sk_buff *skb, struct net_device *dev) /* Copy the packet sans its 802.3 header addresses which have been replaced */ atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12); priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE; - + /* low bit of first byte of destination tells us if broadcast */ tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA); dev->trans_start = jiffies; priv->stats.tx_bytes += len; - + spin_unlock_irqrestore(&priv->irqlock, flags); spin_unlock_bh(&priv->timerlock); dev_kfree_skb(skb); - - return 0; + + return 0; } -static void atmel_transmit_management_frame(struct atmel_private *priv, +static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, u8 *body, int body_len) { u16 buff; - int len = MGMT_FRAME_BODY_OFFSET + body_len; - - if (!(buff = find_tx_buff(priv, len))) + int len = MGMT_FRAME_BODY_OFFSET + body_len; + + if (!(buff = find_tx_buff(priv, len))) return; atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET); @@ -916,24 +914,25 @@ static void atmel_transmit_management_frame(struct atmel_private *priv, priv->tx_buff_tail += len; tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT); } - -static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, + +static void fast_rx_path(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 msdu_size, u16 rx_packet_loc, u32 crc) { /* fast path: unfragmented packet copy directly into skbuf */ - u8 mac4[6]; - struct sk_buff *skb; + u8 mac4[6]; + struct sk_buff *skb; unsigned char *skbp; - + /* get the final, mac 4 header field, this tells us encapsulation */ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6); msdu_size -= 6; - + if (priv->do_rx_crc) { crc = crc32_le(crc, mac4, 6); msdu_size -= 4; } - + if (!(skb = dev_alloc_skb(msdu_size + 14))) { priv->stats.rx_dropped++; return; @@ -942,7 +941,7 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr skb_reserve(skb, 2); skbp = skb_put(skb, msdu_size + 12); atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size); - + if (priv->do_rx_crc) { u32 netcrc; crc = crc32_le(crc, skbp + 12, msdu_size); @@ -953,24 +952,25 @@ static void fast_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr return; } } - + memcpy(skbp, header->addr1, 6); /* destination address */ - if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(&skbp[6], header->addr3, 6); else memcpy(&skbp[6], header->addr2, 6); /* source address */ - - priv->dev->last_rx=jiffies; + + priv->dev->last_rx = jiffies; skb->dev = priv->dev; skb->protocol = eth_type_trans(skb, priv->dev); - skb->ip_summed = CHECKSUM_NONE; + skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); priv->stats.rx_bytes += 12 + msdu_size; priv->stats.rx_packets++; } /* Test to see if the packet in card memory at packet_loc has a valid CRC - It doesn't matter that this is slow: it is only used to proble the first few packets. */ + It doesn't matter that this is slow: it is only used to proble the first few + packets. */ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) { int i = msdu_size - 4; @@ -980,7 +980,7 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return 0; atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4); - + atmel_writeAR(priv->dev, packet_loc); while (i--) { u8 octet = atmel_read8(priv->dev, DR); @@ -990,20 +990,22 @@ static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size) return (crc ^ 0xffffffff) == netcrc; } -static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags) +static void frag_rx_path(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, + u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, + u8 frag_no, int more_frags) { - u8 mac4[6]; + u8 mac4[6]; u8 source[6]; struct sk_buff *skb; - if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) + if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) memcpy(source, header->addr3, 6); else - memcpy(source, header->addr2, 6); - + memcpy(source, header->addr2, 6); + rx_packet_loc += 24; /* skip header */ - + if (priv->do_rx_crc) msdu_size -= 4; @@ -1012,16 +1014,16 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr msdu_size -= 6; rx_packet_loc += 6; - if (priv->do_rx_crc) + if (priv->do_rx_crc) crc = crc32_le(crc, mac4, 6); - + priv->frag_seq = seq_no; priv->frag_no = 1; priv->frag_len = msdu_size; - memcpy(priv->frag_source, source, 6); + memcpy(priv->frag_source, source, 6); memcpy(&priv->rx_buf[6], source, 6); memcpy(priv->rx_buf, header->addr1, 6); - + atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size); if (priv->do_rx_crc) { @@ -1033,17 +1035,17 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr memset(priv->frag_source, 0xff, 6); } } - + } else if (priv->frag_no == frag_no && priv->frag_seq == seq_no && memcmp(priv->frag_source, source, 6) == 0) { - - atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len], + + atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len], rx_packet_loc, msdu_size); if (priv->do_rx_crc) { u32 netcrc; - crc = crc32_le(crc, - &priv->rx_buf[12 + priv->frag_len], + crc = crc32_le(crc, + &priv->rx_buf[12 + priv->frag_len], msdu_size); atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4); if ((crc ^ 0xffffffff) != netcrc) { @@ -1052,7 +1054,7 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr more_frags = 1; /* don't send broken assembly */ } } - + priv->frag_len += msdu_size; priv->frag_no++; @@ -1062,60 +1064,60 @@ static void frag_rx_path(struct atmel_private *priv, struct ieee80211_hdr_4addr priv->stats.rx_dropped++; } else { skb_reserve(skb, 2); - memcpy(skb_put(skb, priv->frag_len + 12), + memcpy(skb_put(skb, priv->frag_len + 12), priv->rx_buf, priv->frag_len + 12); priv->dev->last_rx = jiffies; skb->dev = priv->dev; skb->protocol = eth_type_trans(skb, priv->dev); - skb->ip_summed = CHECKSUM_NONE; + skb->ip_summed = CHECKSUM_NONE; netif_rx(skb); priv->stats.rx_bytes += priv->frag_len + 12; priv->stats.rx_packets++; } } - } else priv->wstats.discard.fragment++; } - + static void rx_done_irq(struct atmel_private *priv) { int i; struct ieee80211_hdr_4addr header; - - for (i = 0; + + for (i = 0; atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID && i < priv->host_info.rx_desc_count; i++) { - + u16 msdu_size, rx_packet_loc, frame_ctl, seq_control; u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head)); u32 crc = 0xffffffff; - + if (status != RX_STATUS_SUCCESS) { if (status == 0xc1) /* determined by experiment */ priv->wstats.discard.nwid++; else - priv->stats.rx_errors++; + priv->stats.rx_errors++; goto next; } msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head)); rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head)); - + if (msdu_size < 30) { - priv->stats.rx_errors++; + priv->stats.rx_errors++; goto next; } - + /* Get header as far as end of seq_ctl */ atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24); frame_ctl = le16_to_cpu(header.frame_ctl); seq_control = le16_to_cpu(header.seq_ctl); - /* probe for CRC use here if needed once five packets have arrived with - the same crc status, we assume we know what's happening and stop probing */ + /* probe for CRC use here if needed once five packets have + arrived with the same crc status, we assume we know what's + happening and stop probing */ if (priv->probe_crc) { if (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED)) { priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size); @@ -1130,34 +1132,33 @@ static void rx_done_irq(struct atmel_private *priv) priv->probe_crc = 0; } } - + /* don't CRC header when WEP in use */ if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE80211_FCTL_PROTECTED))) { crc = crc32_le(0xffffffff, (unsigned char *)&header, 24); } msdu_size -= 24; /* header */ - if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { - + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) { int more_fragments = frame_ctl & IEEE80211_FCTL_MOREFRAGS; u8 packet_fragment_no = seq_control & IEEE80211_SCTL_FRAG; u16 packet_sequence_no = (seq_control & IEEE80211_SCTL_SEQ) >> 4; - - if (!more_fragments && packet_fragment_no == 0 ) { + + if (!more_fragments && packet_fragment_no == 0) { fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc); } else { frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc, packet_sequence_no, packet_fragment_no, more_fragments); } } - + if ((frame_ctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { /* copy rest of packet into buffer */ atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size); - + /* we use the same buffer for frag reassembly and control packets */ memset(priv->frag_source, 0xff, 6); - + if (priv->do_rx_crc) { /* last 4 octets is crc */ msdu_size -= 4; @@ -1170,18 +1171,18 @@ static void rx_done_irq(struct atmel_private *priv) atmel_management_frame(priv, &header, msdu_size, atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head))); - } + } - next: +next: /* release descriptor */ - atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED); - + atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED); + if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1)) - priv->rx_desc_head++; + priv->rx_desc_head++; else priv->rx_desc_head = 0; } -} +} static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs) { @@ -1189,7 +1190,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs struct atmel_private *priv = netdev_priv(dev); u8 isr; int i = -1; - static u8 irq_order[] = { + static u8 irq_order[] = { ISR_OUT_OF_RANGE, ISR_RxCOMPLETE, ISR_TxCOMPLETE, @@ -1199,20 +1200,19 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs ISR_IBSS_MERGE, ISR_GENERIC_IRQ }; - - if (priv->card && priv->present_callback && + if (priv->card && priv->present_callback && !(*priv->present_callback)(priv->card)) return IRQ_HANDLED; /* In this state upper-level code assumes it can mess with the card unhampered by interrupts which may change register state. Note that even though the card shouldn't generate interrupts - the inturrupt line may be shared. This allows card setup + the inturrupt line may be shared. This allows card setup to go on without disabling interrupts for a long time. */ if (priv->station_state == STATION_STATE_DOWN) return IRQ_NONE; - + atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */ while (1) { @@ -1221,36 +1221,36 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); return IRQ_HANDLED; } - + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - + if (!isr) { atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */ return i == -1 ? IRQ_NONE : IRQ_HANDLED; } - + atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */ - + for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++) if (isr & irq_order[i]) break; - + if (!atmel_lock_mac(priv)) { /* failed to contact card */ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name); return IRQ_HANDLED; } - + isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET)); isr ^= irq_order[i]; atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr); atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - + switch (irq_order[i]) { - - case ISR_OUT_OF_RANGE: - if (priv->operating_mode == IW_MODE_INFRA && + + case ISR_OUT_OF_RANGE: + if (priv->operating_mode == IW_MODE_INFRA && priv->station_state == STATION_STATE_READY) { priv->station_is_associated = 0; atmel_scan(priv, 1); @@ -1261,24 +1261,24 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs priv->wstats.discard.misc++; /* fall through */ case ISR_RxCOMPLETE: - rx_done_irq(priv); + rx_done_irq(priv); break; - + case ISR_TxCOMPLETE: - tx_done_irq(priv); + tx_done_irq(priv); break; - + case ISR_FATAL_ERROR: printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name); atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); break; - - case ISR_COMMAND_COMPLETE: + + case ISR_COMMAND_COMPLETE: atmel_command_irq(priv); break; case ISR_IBSS_MERGE: - atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, + atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, priv->CurrentBSSID, 6); /* The WPA stuff cares about the current AP address */ if (priv->use_wpa) @@ -1288,24 +1288,23 @@ static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs printk(KERN_INFO "%s: Generic_irq received.\n", dev->name); break; } - } + } } - -static struct net_device_stats *atmel_get_stats (struct net_device *dev) +static struct net_device_stats *atmel_get_stats(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); return &priv->stats; } -static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev) +static struct iw_statistics *atmel_get_wireless_stats(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - /* update the link quality here in case we are seeing no beacons + /* update the link quality here in case we are seeing no beacons at all to drive the process */ atmel_smooth_qual(priv); - + priv->wstats.status = priv->station_state; if (priv->operating_mode == IW_MODE_INFRA) { @@ -1328,8 +1327,8 @@ static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev) | IW_QUAL_NOISE_INVALID; priv->wstats.miss.beacon = 0; } - - return (&priv->wstats); + + return &priv->wstats; } static int atmel_change_mtu(struct net_device *dev, int new_mtu) @@ -1343,21 +1342,21 @@ static int atmel_change_mtu(struct net_device *dev, int new_mtu) static int atmel_set_mac_address(struct net_device *dev, void *p) { struct sockaddr *addr = p; - + memcpy (dev->dev_addr, addr->sa_data, dev->addr_len); return atmel_open(dev); } EXPORT_SYMBOL(atmel_open); -int atmel_open (struct net_device *dev) +int atmel_open(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); int i, channel; /* any scheduled timer is no longer needed and might screw things up.. */ del_timer_sync(&priv->management_timer); - + /* Interrupts will not touch the card once in this state... */ priv->station_state = STATION_STATE_DOWN; @@ -1377,7 +1376,7 @@ int atmel_open (struct net_device *dev) priv->site_survey_state = SITE_SURVEY_IDLE; priv->station_is_associated = 0; - if (!reset_atmel_card(dev)) + if (!reset_atmel_card(dev)) return -EAGAIN; if (priv->config_reg_domain) { @@ -1391,26 +1390,26 @@ int atmel_open (struct net_device *dev) if (i == sizeof(channel_table)/sizeof(channel_table[0])) { priv->reg_domain = REG_DOMAIN_MKK1; printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name); - } + } } - + if ((channel = atmel_validate_channel(priv, priv->channel))) priv->channel = channel; - /* this moves station_state on.... */ - atmel_scan(priv, 1); + /* this moves station_state on.... */ + atmel_scan(priv, 1); atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */ return 0; } -static int atmel_close (struct net_device *dev) +static int atmel_close(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - + atmel_enter_state(priv, STATION_STATE_DOWN); - - if (priv->bus_type == BUS_TYPE_PCCARD) + + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); return 0; @@ -1438,43 +1437,46 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv) int i; char *p = buf; char *s, *r, *c; - - p += sprintf(p, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR); - + + p += sprintf(p, "Driver version:\t\t%d.%d\n", + DRIVER_MAJOR, DRIVER_MINOR); + if (priv->station_state != STATION_STATE_DOWN) { - p += sprintf(p, "Firmware version:\t%d.%d build %d\nFirmware location:\t", + p += sprintf(p, "Firmware version:\t%d.%d build %d\n" + "Firmware location:\t", priv->host_info.major_version, priv->host_info.minor_version, priv->host_info.build_version); - - if (priv->card_type != CARD_TYPE_EEPROM) + + if (priv->card_type != CARD_TYPE_EEPROM) p += sprintf(p, "on card\n"); - else if (priv->firmware) - p += sprintf(p, "%s loaded by host\n", priv->firmware_id); + else if (priv->firmware) + p += sprintf(p, "%s loaded by host\n", + priv->firmware_id); else - p += sprintf(p, "%s loaded by hotplug\n", priv->firmware_id); - - switch(priv->card_type) { + p += sprintf(p, "%s loaded by hotplug\n", + priv->firmware_id); + + switch (priv->card_type) { case CARD_TYPE_PARALLEL_FLASH: c = "Parallel flash"; break; case CARD_TYPE_SPI_FLASH: c = "SPI flash\n"; break; case CARD_TYPE_EEPROM: c = "EEPROM"; break; default: c = ""; } - r = ""; for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) if (priv->reg_domain == channel_table[i].reg_domain) r = channel_table[i].name; - + p += sprintf(p, "MAC memory type:\t%s\n", c); p += sprintf(p, "Regulatory domain:\t%s\n", r); - p += sprintf(p, "Host CRC checking:\t%s\n", + p += sprintf(p, "Host CRC checking:\t%s\n", priv->do_rx_crc ? "On" : "Off"); p += sprintf(p, "WPA-capable firmware:\t%s\n", priv->use_wpa ? "Yes" : "No"); } - + switch(priv->station_state) { case STATION_STATE_SCANNING: s = "Scanning"; break; case STATION_STATE_JOINNING: s = "Joining"; break; @@ -1486,9 +1488,9 @@ static int atmel_proc_output (char *buf, struct atmel_private *priv) case STATION_STATE_DOWN: s = "Down"; break; default: s = ""; } - + p += sprintf(p, "Current state:\t\t%s\n", s); - return p - buf; + return p - buf; } static int atmel_read_proc(char *page, char **start, off_t off, @@ -1504,8 +1506,10 @@ static int atmel_read_proc(char *page, char **start, off_t off, return len; } -struct net_device *init_atmel_card( unsigned short irq, unsigned long port, const AtmelFWType fw_type, - struct device *sys_dev, int (*card_present)(void *), void *card) +struct net_device *init_atmel_card(unsigned short irq, unsigned long port, + const AtmelFWType fw_type, + struct device *sys_dev, + int (*card_present)(void *), void *card) { struct net_device *dev; struct atmel_private *priv; @@ -1514,11 +1518,11 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons /* Create the network device object. */ dev = alloc_etherdev(sizeof(*priv)); if (!dev) { - printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n"); + printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n"); return NULL; } if (dev_alloc_name(dev, dev->name) < 0) { - printk(KERN_ERR "atmel: Couldn't get name!\n"); + printk(KERN_ERR "atmel: Couldn't get name!\n"); goto err_out_free; } @@ -1550,7 +1554,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons memset(priv->BSSID, 0, 6); priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */ priv->station_was_associated = 0; - + priv->last_survey = jiffies; priv->preamble = LONG_PREAMBLE; priv->operating_mode = IW_MODE_INFRA; @@ -1586,7 +1590,7 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons spin_lock_init(&priv->timerlock); priv->management_timer.function = atmel_management_timer; priv->management_timer.data = (unsigned long) dev; - + dev->open = atmel_open; dev->stop = atmel_close; dev->change_mtu = atmel_change_mtu; @@ -1597,44 +1601,44 @@ struct net_device *init_atmel_card( unsigned short irq, unsigned long port, cons dev->do_ioctl = atmel_ioctl; dev->irq = irq; dev->base_addr = port; - + SET_NETDEV_DEV(dev, sys_dev); - + if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) { - printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc ); + printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc); goto err_out_free; } - if (!request_region(dev->base_addr, 32, + if (!request_region(dev->base_addr, 32, priv->bus_type == BUS_TYPE_PCCARD ? "atmel_cs" : "atmel_pci")) { goto err_out_irq; } - + if (register_netdev(dev)) goto err_out_res; - + if (!probe_atmel_card(dev)){ unregister_netdev(dev); goto err_out_res; } - + netif_carrier_off(dev); - - create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); - + + create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); + printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", dev->name, DRIVER_MAJOR, DRIVER_MINOR, dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] ); - + SET_MODULE_OWNER(dev); return dev; - - err_out_res: + +err_out_res: release_region( dev->base_addr, 32); - err_out_irq: +err_out_irq: free_irq(dev->irq, dev); - err_out_free: +err_out_free: free_netdev(dev); return NULL; } @@ -1644,12 +1648,12 @@ EXPORT_SYMBOL(init_atmel_card); void stop_atmel_card(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - + /* put a brick on it... */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); - + del_timer_sync(&priv->management_timer); unregister_netdev(dev); remove_proc_entry("driver/atmel", NULL); @@ -1675,13 +1679,13 @@ static int atmel_set_essid(struct net_device *dev, int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; priv->connect_to_any_BSS = 0; - + /* Check the size of the string */ if (dwrq->length > MAX_SSID_LENGTH + 1) - return -E2BIG ; + return -E2BIG; if (index != 0) return -EINVAL; - + memcpy(priv->new_SSID, extra, dwrq->length - 1); priv->new_SSID_size = dwrq->length - 1; } @@ -1706,7 +1710,7 @@ static int atmel_get_essid(struct net_device *dev, extra[priv->SSID_size] = '\0'; dwrq->length = priv->SSID_size + 1; } - + dwrq->flags = !priv->connect_to_any_BSS; /* active */ return 0; @@ -1768,7 +1772,7 @@ static int atmel_set_encode(struct net_device *dev, /* WE specify that if a valid key is set, encryption * should be enabled (user may turn it off later) * This is also how "iwconfig ethX key on" works */ - if (index == current_index && + if (index == current_index && priv->wep_key_len[index] > 0) { priv->wep_is_on = 1; priv->exclude_unencrypted = 1; @@ -1783,18 +1787,18 @@ static int atmel_set_encode(struct net_device *dev, } else { /* Do we want to just set the transmit key index ? */ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; - if ( index>=0 && index < 4 ) { + if (index >= 0 && index < 4) { priv->default_key = index; } else /* Don't complain if only change the mode */ - if(!dwrq->flags & IW_ENCODE_MODE) { + if (!dwrq->flags & IW_ENCODE_MODE) { return -EINVAL; } } /* Read the flags */ - if(dwrq->flags & IW_ENCODE_DISABLED) { + if (dwrq->flags & IW_ENCODE_DISABLED) { priv->wep_is_on = 0; - priv->encryption_level = 0; + priv->encryption_level = 0; priv->pairwise_cipher_suite = CIPHER_SUITE_NONE; } else { priv->wep_is_on = 1; @@ -1806,15 +1810,14 @@ static int atmel_set_encode(struct net_device *dev, priv->encryption_level = 1; } } - if(dwrq->flags & IW_ENCODE_RESTRICTED) + if (dwrq->flags & IW_ENCODE_RESTRICTED) priv->exclude_unencrypted = 1; - if(dwrq->flags & IW_ENCODE_OPEN) + if(dwrq->flags & IW_ENCODE_OPEN) priv->exclude_unencrypted = 0; - + return -EINPROGRESS; /* Call commit handler */ } - static int atmel_get_encode(struct net_device *dev, struct iw_request_info *info, struct iw_point *dwrq, @@ -1822,7 +1825,7 @@ static int atmel_get_encode(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; - + if (!priv->wep_is_on) dwrq->flags = IW_ENCODE_DISABLED; else { @@ -1843,7 +1846,7 @@ static int atmel_get_encode(struct net_device *dev, memset(extra, 0, 16); memcpy(extra, priv->wep_keys[index], dwrq->length); } - + return 0; } @@ -1862,17 +1865,17 @@ static int atmel_set_rate(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + if (vwrq->fixed == 0) { priv->tx_rate = 3; priv->auto_tx_rate = 1; } else { priv->auto_tx_rate = 0; - + /* Which type of value ? */ - if((vwrq->value < 4) && (vwrq->value >= 0)) { + if ((vwrq->value < 4) && (vwrq->value >= 0)) { /* Setting by rate index */ - priv->tx_rate = vwrq->value; + priv->tx_rate = vwrq->value; } else { /* Setting by frequency value */ switch (vwrq->value) { @@ -1899,7 +1902,7 @@ static int atmel_set_mode(struct net_device *dev, return -EINVAL; priv->operating_mode = *uwrq; - return -EINPROGRESS; + return -EINPROGRESS; } static int atmel_get_mode(struct net_device *dev, @@ -1908,7 +1911,7 @@ static int atmel_get_mode(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + *uwrq = priv->operating_mode; return 0; } @@ -1962,9 +1965,9 @@ static int atmel_set_retry(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - - if(!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { - if(vwrq->flags & IW_RETRY_MAX) + + if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { + if (vwrq->flags & IW_RETRY_MAX) priv->long_retry = vwrq->value; else if (vwrq->flags & IW_RETRY_MIN) priv->short_retry = vwrq->value; @@ -1973,9 +1976,9 @@ static int atmel_set_retry(struct net_device *dev, priv->long_retry = vwrq->value; priv->short_retry = vwrq->value; } - return -EINPROGRESS; + return -EINPROGRESS; } - + return -EINVAL; } @@ -1989,13 +1992,13 @@ static int atmel_get_retry(struct net_device *dev, vwrq->disabled = 0; /* Can't be disabled */ /* Note : by default, display the min retry number */ - if((vwrq->flags & IW_RETRY_MAX)) { + if (vwrq->flags & IW_RETRY_MAX) { vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; vwrq->value = priv->long_retry; } else { vwrq->flags = IW_RETRY_LIMIT; vwrq->value = priv->short_retry; - if(priv->long_retry != priv->short_retry) + if (priv->long_retry != priv->short_retry) vwrq->flags |= IW_RETRY_MIN; } @@ -2010,13 +2013,13 @@ static int atmel_set_rts(struct net_device *dev, struct atmel_private *priv = netdev_priv(dev); int rthr = vwrq->value; - if(vwrq->disabled) + if (vwrq->disabled) rthr = 2347; - if((rthr < 0) || (rthr > 2347)) { + if ((rthr < 0) || (rthr > 2347)) { return -EINVAL; } priv->rts_threshold = rthr; - + return -EINPROGRESS; /* Call commit handler */ } @@ -2026,7 +2029,7 @@ static int atmel_get_rts(struct net_device *dev, char *extra) { struct atmel_private *priv = netdev_priv(dev); - + vwrq->value = priv->rts_threshold; vwrq->disabled = (vwrq->value >= 2347); vwrq->fixed = 1; @@ -2042,14 +2045,14 @@ static int atmel_set_frag(struct net_device *dev, struct atmel_private *priv = netdev_priv(dev); int fthr = vwrq->value; - if(vwrq->disabled) + if (vwrq->disabled) fthr = 2346; - if((fthr < 256) || (fthr > 2346)) { + if ((fthr < 256) || (fthr > 2346)) { return -EINVAL; } fthr &= ~0x1; /* Get an even value - is it really needed ??? */ priv->frag_threshold = fthr; - + return -EINPROGRESS; /* Call commit handler */ } @@ -2077,21 +2080,21 @@ static int atmel_set_freq(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); int rc = -EINPROGRESS; /* Call commit handler */ - + /* If setting by frequency, convert to a channel */ - if((fwrq->e == 1) && - (fwrq->m >= (int) 241200000) && - (fwrq->m <= (int) 248700000)) { + if ((fwrq->e == 1) && + (fwrq->m >= (int) 241200000) && + (fwrq->m <= (int) 248700000)) { int f = fwrq->m / 100000; int c = 0; - while((c < 14) && (f != frequency_list[c])) + while ((c < 14) && (f != frequency_list[c])) c++; /* Hack to fall through... */ fwrq->e = 0; fwrq->m = c + 1; } /* Setting by channel number */ - if((fwrq->m > 1000) || (fwrq->e > 0)) + if ((fwrq->m > 1000) || (fwrq->e > 0)) rc = -EOPNOTSUPP; else { int channel = fwrq->m; @@ -2099,7 +2102,7 @@ static int atmel_set_freq(struct net_device *dev, priv->channel = channel; } else { rc = -EINVAL; - } + } } return rc; } @@ -2130,7 +2133,7 @@ static int atmel_set_scan(struct net_device *dev, * This is not an error, while the device perform scanning, * traffic doesn't flow, so it's a perfect DoS... * Jean II */ - + if (priv->station_state == STATION_STATE_DOWN) return -EAGAIN; @@ -2142,15 +2145,15 @@ static int atmel_set_scan(struct net_device *dev, /* Initiate a scan command */ if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS) return -EBUSY; - + del_timer_sync(&priv->management_timer); spin_lock_irqsave(&priv->irqlock, flags); - + priv->site_survey_state = SITE_SURVEY_IN_PROGRESS; priv->fast_scan = 0; atmel_scan(priv, 0); spin_unlock_irqrestore(&priv->irqlock, flags); - + return 0; } @@ -2163,11 +2166,11 @@ static int atmel_get_scan(struct net_device *dev, int i; char *current_ev = extra; struct iw_event iwe; - + if (priv->site_survey_state != SITE_SURVEY_COMPLETED) return -EAGAIN; - - for(i=0; iBSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6); @@ -2179,16 +2182,16 @@ static int atmel_get_scan(struct net_device *dev, iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID); - + iwe.cmd = SIOCGIWMODE; iwe.u.mode = priv->BSSinfo[i].BSStype; current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); - + iwe.cmd = SIOCGIWFREQ; iwe.u.freq.m = priv->BSSinfo[i].channel; iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); - + iwe.cmd = SIOCGIWENCODE; if (priv->BSSinfo[i].UsingWEP) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; @@ -2196,13 +2199,12 @@ static int atmel_get_scan(struct net_device *dev, iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL); - } /* Length of data */ dwrq->length = (current_ev - extra); - dwrq->flags = 0; - + dwrq->flags = 0; + return 0; } @@ -2213,7 +2215,7 @@ static int atmel_get_range(struct net_device *dev, { struct atmel_private *priv = netdev_priv(dev); struct iw_range *range = (struct iw_range *) extra; - int k,i,j; + int k, i, j; dwrq->length = sizeof(struct iw_range); memset(range, 0, sizeof(struct iw_range)); @@ -2226,14 +2228,14 @@ static int atmel_get_range(struct net_device *dev, break; } if (range->num_channels != 0) { - for(k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) { + for (k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) { range->freq[k].i = i; /* List index */ - range->freq[k].m = frequency_list[i-1] * 100000; + range->freq[k].m = frequency_list[i - 1] * 100000; range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */ } range->num_frequency = k; } - + range->max_qual.qual = 100; range->max_qual.level = 100; range->max_qual.noise = 0; @@ -2261,11 +2263,11 @@ static int atmel_get_range(struct net_device *dev, range->encoding_size[1] = 13; range->num_encoding_sizes = 2; range->max_encoding_tokens = 4; - + range->pmp_flags = IW_POWER_ON; range->pmt_flags = IW_POWER_ON; range->pm_capa = 0; - + range->we_version_source = WIRELESS_EXT; range->we_version_compiled = WIRELESS_EXT; range->retry_capa = IW_RETRY_LIMIT ; @@ -2289,7 +2291,7 @@ static int atmel_set_wap(struct net_device *dev, if (awrq->sa_family != ARPHRD_ETHER) return -EINVAL; - + if (memcmp(bcast, awrq->sa_data, 6) == 0) { del_timer_sync(&priv->management_timer); spin_lock_irqsave(&priv->irqlock, flags); @@ -2297,8 +2299,8 @@ static int atmel_set_wap(struct net_device *dev, spin_unlock_irqrestore(&priv->irqlock, flags); return 0; } - - for(i=0; iBSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) { if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) { return -EINVAL; @@ -2313,10 +2315,10 @@ static int atmel_set_wap(struct net_device *dev, } } } - + return -EINVAL; } - + static int atmel_config_commit(struct net_device *dev, struct iw_request_info *info, /* NULL */ void *zwrq, /* NULL */ @@ -2325,18 +2327,18 @@ static int atmel_config_commit(struct net_device *dev, return atmel_open(dev); } -static const iw_handler atmel_handler[] = +static const iw_handler atmel_handler[] = { (iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */ - (iw_handler) atmel_get_name, /* SIOCGIWNAME */ + (iw_handler) atmel_get_name, /* SIOCGIWNAME */ (iw_handler) NULL, /* SIOCSIWNWID */ (iw_handler) NULL, /* SIOCGIWNWID */ (iw_handler) atmel_set_freq, /* SIOCSIWFREQ */ (iw_handler) atmel_get_freq, /* SIOCGIWFREQ */ (iw_handler) atmel_set_mode, /* SIOCSIWMODE */ (iw_handler) atmel_get_mode, /* SIOCGIWMODE */ - (iw_handler) NULL, /* SIOCSIWSENS */ - (iw_handler) NULL, /* SIOCGIWSENS */ + (iw_handler) NULL, /* SIOCSIWSENS */ + (iw_handler) NULL, /* SIOCGIWSENS */ (iw_handler) NULL, /* SIOCSIWRANGE */ (iw_handler) atmel_get_range, /* SIOCGIWRANGE */ (iw_handler) NULL, /* SIOCSIWPRIV */ @@ -2350,13 +2352,13 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_set_wap, /* SIOCSIWAP */ (iw_handler) atmel_get_wap, /* SIOCGIWAP */ (iw_handler) NULL, /* -- hole -- */ - (iw_handler) NULL, /* SIOCGIWAPLIST */ + (iw_handler) NULL, /* SIOCGIWAPLIST */ (iw_handler) atmel_set_scan, /* SIOCSIWSCAN */ (iw_handler) atmel_get_scan, /* SIOCGIWSCAN */ (iw_handler) atmel_set_essid, /* SIOCSIWESSID */ (iw_handler) atmel_get_essid, /* SIOCGIWESSID */ - (iw_handler) NULL, /* SIOCSIWNICKN */ - (iw_handler) NULL, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* SIOCSIWNICKN */ + (iw_handler) NULL, /* SIOCGIWNICKN */ (iw_handler) NULL, /* -- hole -- */ (iw_handler) NULL, /* -- hole -- */ (iw_handler) atmel_set_rate, /* SIOCSIWRATE */ @@ -2365,8 +2367,8 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_get_rts, /* SIOCGIWRTS */ (iw_handler) atmel_set_frag, /* SIOCSIWFRAG */ (iw_handler) atmel_get_frag, /* SIOCGIWFRAG */ - (iw_handler) NULL, /* SIOCSIWTXPOW */ - (iw_handler) NULL, /* SIOCGIWTXPOW */ + (iw_handler) NULL, /* SIOCSIWTXPOW */ + (iw_handler) NULL, /* SIOCGIWTXPOW */ (iw_handler) atmel_set_retry, /* SIOCSIWRETRY */ (iw_handler) atmel_get_retry, /* SIOCGIWRETRY */ (iw_handler) atmel_set_encode, /* SIOCSIWENCODE */ @@ -2375,39 +2377,51 @@ static const iw_handler atmel_handler[] = (iw_handler) atmel_get_power, /* SIOCGIWPOWER */ }; - -static const iw_handler atmel_private_handler[] = +static const iw_handler atmel_private_handler[] = { NULL, /* SIOCIWFIRSTPRIV */ }; typedef struct atmel_priv_ioctl { char id[32]; - unsigned char __user *data; - unsigned short len; + unsigned char __user *data; + unsigned short len; } atmel_priv_ioctl; - -#define ATMELFWL SIOCIWFIRSTPRIV -#define ATMELIDIFC ATMELFWL + 1 -#define ATMELRD ATMELFWL + 2 -#define ATMELMAGIC 0x51807 +#define ATMELFWL SIOCIWFIRSTPRIV +#define ATMELIDIFC ATMELFWL + 1 +#define ATMELRD ATMELFWL + 2 +#define ATMELMAGIC 0x51807 #define REGDOMAINSZ 20 static const struct iw_priv_args atmel_private_args[] = { -/*{ cmd, set_args, get_args, name } */ - { ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" }, - { ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" }, - { ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" }, + { + .cmd = ATMELFWL, + .set_args = IW_PRIV_TYPE_BYTE + | IW_PRIV_SIZE_FIXED + | sizeof (atmel_priv_ioctl), + .get_args = IW_PRIV_TYPE_NONE, + .name = "atmelfwl" + }, { + .cmd = ATMELIDIFC, + .set_args = IW_PRIV_TYPE_NONE, + .get_args = IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + .name = "atmelidifc" + }, { + .cmd = ATMELRD, + .set_args = IW_PRIV_TYPE_CHAR | REGDOMAINSZ, + .get_args = IW_PRIV_TYPE_NONE, + .name = "regdomain" + }, }; -static const struct iw_handler_def atmel_handler_def = +static const struct iw_handler_def atmel_handler_def = { .num_standard = sizeof(atmel_handler)/sizeof(iw_handler), - .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), - .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), + .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler), + .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args), .standard = (iw_handler *) atmel_handler, - .private = (iw_handler *) atmel_private_handler, + .private = (iw_handler *) atmel_private_handler, .private_args = (struct iw_priv_args *) atmel_private_args, .get_wireless_stats = atmel_get_wireless_stats }; @@ -2419,13 +2433,13 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) atmel_priv_ioctl com; struct iwreq *wrq = (struct iwreq *) rq; unsigned char *new_firmware; - char domain[REGDOMAINSZ+1]; + char domain[REGDOMAINSZ + 1]; switch (cmd) { case ATMELIDIFC: - wrq->u.param.value = ATMELMAGIC; + wrq->u.param.value = ATMELMAGIC; break; - + case ATMELFWL: if (copy_from_user(&com, rq->ifr_data, sizeof(com))) { rc = -EFAULT; @@ -2449,7 +2463,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) } kfree(priv->firmware); - + priv->firmware = new_firmware; priv->firmware_length = com.len; strncpy(priv->firmware_id, com.id, 31); @@ -2461,7 +2475,7 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = -EFAULT; break; } - + if (!capable(CAP_NET_ADMIN)) { rc = -EPERM; break; @@ -2484,15 +2498,15 @@ static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) rc = 0; } } - + if (rc == 0 && priv->station_state != STATION_STATE_DOWN) rc = atmel_open(dev); break; - + default: rc = -EOPNOTSUPP; } - + return rc; } @@ -2503,17 +2517,17 @@ struct auth_body { u8 el_id; u8 chall_text_len; u8 chall_text[253]; -}; +}; static void atmel_enter_state(struct atmel_private *priv, int new_state) { int old_state = priv->station_state; - + if (new_state == old_state) return; - + priv->station_state = new_state; - + if (new_state == STATION_STATE_READY) { netif_start_queue(priv->dev); netif_carrier_on(priv->dev); @@ -2540,7 +2554,7 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid) u8 options; u8 SSID_size; } cmd; - + memset(cmd.BSSID, 0xff, 6); if (priv->fast_scan) { @@ -2554,17 +2568,17 @@ static void atmel_scan(struct atmel_private *priv, int specific_ssid) cmd.min_channel_time = cpu_to_le16(10); cmd.max_channel_time = cpu_to_le16(120); } - + cmd.options = 0; - + if (!specific_ssid) cmd.options |= SCAN_OPTIONS_SITE_SURVEY; - - cmd.channel = (priv->channel & 0x7f); + + cmd.channel = (priv->channel & 0x7f); cmd.scan_type = SCAN_TYPE_ACTIVE; - cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ? + cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ? BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE); - + atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd)); /* This must come after all hardware access to avoid being messed up @@ -2591,16 +2605,15 @@ static void join(struct atmel_private *priv, int type) cmd.BSS_type = type; cmd.timeout = cpu_to_le16(2000); - atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd)); + atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd)); } - static void start(struct atmel_private *priv, int type) { struct { u8 BSSID[6]; u8 SSID[MAX_SSID_LENGTH]; - u8 BSS_type; + u8 BSS_type; u8 channel; u8 SSID_size; u8 reserved[3]; @@ -2612,13 +2625,14 @@ static void start(struct atmel_private *priv, int type) cmd.BSS_type = type; cmd.channel = (priv->channel & 0x7f); - atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd)); + atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd)); } -static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel) +static void handle_beacon_probe(struct atmel_private *priv, u16 capability, + u8 channel) { int rejoin = 0; - int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? SHORT_PREAMBLE : LONG_PREAMBLE; if (priv->preamble != new) { @@ -2626,48 +2640,48 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 c rejoin = 1; atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new); } - + if (priv->channel != channel) { priv->channel = channel; rejoin = 1; atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel); } - + if (rejoin) { priv->station_is_associated = 0; atmel_enter_state(priv, STATION_STATE_JOINNING); - + if (priv->operating_mode == IW_MODE_INFRA) join(priv, BSS_TYPE_INFRASTRUCTURE); - else + else join(priv, BSS_TYPE_AD_HOC); - } + } } - -static void send_authentication_request(struct atmel_private *priv, u16 system, u8 *challenge, int challenge_len) +static void send_authentication_request(struct atmel_private *priv, u16 system, + u8 *challenge, int challenge_len) { struct ieee80211_hdr_4addr header; struct auth_body auth; - - header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); - header.duration_id = cpu_to_le16(0x8000); + + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH); + header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; memcpy(header.addr1, priv->CurrentBSSID, 6); memcpy(header.addr2, priv->dev->dev_addr, 6); memcpy(header.addr3, priv->CurrentBSSID, 6); - - if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1) + + if (priv->wep_is_on && priv->CurrentAuthentTransactionSeqNum != 1) /* no WEP for authentication frames with TrSeqNo 1 */ header.frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); - - auth.alg = cpu_to_le16(system); + + auth.alg = cpu_to_le16(system); auth.status = 0; auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum); - priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1; + priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1; priv->CurrentAuthentTransactionSeqNum += 2; - + if (challenge_len != 0) { auth.el_id = 16; /* challenge_text */ auth.chall_text_len = challenge_len; @@ -2685,7 +2699,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) struct ieee80211_hdr_4addr header; struct ass_req_format { u16 capability; - u16 listen_interval; + u16 listen_interval; u8 ap[6]; /* nothing after here directly accessible */ u8 ssid_el_id; u8 ssid_len; @@ -2694,15 +2708,15 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) u8 sup_rates_len; u8 rates[4]; } body; - - header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | + + header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT | (is_reassoc ? IEEE80211_STYPE_REASSOC_REQ : IEEE80211_STYPE_ASSOC_REQ)); header.duration_id = cpu_to_le16(0x8000); header.seq_ctl = 0; - memcpy(header.addr1, priv->CurrentBSSID, 6); + memcpy(header.addr1, priv->CurrentBSSID, 6); memcpy(header.addr2, priv->dev->dev_addr, 6); - memcpy(header.addr3, priv->CurrentBSSID, 6); + memcpy(header.addr3, priv->CurrentBSSID, 6); body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS); if (priv->wep_is_on) @@ -2711,18 +2725,18 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble); body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period); - + /* current AP address - only in reassoc frame */ if (is_reassoc) { - memcpy(body.ap, priv->CurrentBSSID, 6); + memcpy(body.ap, priv->CurrentBSSID, 6); ssid_el_p = (u8 *)&body.ssid_el_id; bodysize = 18 + priv->SSID_size; } else { ssid_el_p = (u8 *)&body.ap[0]; bodysize = 12 + priv->SSID_size; } - - ssid_el_p[0]= C80211_MGMT_ElementID_SSID; + + ssid_el_p[0] = C80211_MGMT_ElementID_SSID; ssid_el_p[1] = priv->SSID_size; memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size); ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates; @@ -2732,7 +2746,8 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize); } -static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee80211_hdr_4addr *header) +static int is_frame_from_current_bss(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header) { if (le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_FROMDS) return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0; @@ -2745,29 +2760,29 @@ static int retrieve_bss(struct atmel_private *priv) int i; int max_rssi = -128; int max_index = -1; - + if (priv->BSS_list_entries == 0) return -1; - + if (priv->connect_to_any_BSS) { - /* Select a BSS with the max-RSSI but of the same type and of the same WEP mode - and that it is not marked as 'bad' (i.e. we had previously failed to connect to - this BSS with the settings that we currently use) */ + /* Select a BSS with the max-RSSI but of the same type and of + the same WEP mode and that it is not marked as 'bad' (i.e. + we had previously failed to connect to this BSS with the + settings that we currently use) */ priv->current_BSS = 0; - for(i=0; iBSS_list_entries; i++) { + for (i = 0; i < priv->BSS_list_entries; i++) { if (priv->operating_mode == priv->BSSinfo[i].BSStype && - ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) || + ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) || (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) && !(priv->BSSinfo[i].channel & 0x80)) { max_rssi = priv->BSSinfo[i].RSSI; priv->current_BSS = max_index = i; } - } return max_index; } - - for(i=0; iBSS_list_entries; i++) { + + for (i = 0; i < priv->BSS_list_entries; i++) { if (priv->SSID_size == priv->BSSinfo[i].SSIDsize && memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 && priv->operating_mode == priv->BSSinfo[i].BSStype && @@ -2781,19 +2796,19 @@ static int retrieve_bss(struct atmel_private *priv) return max_index; } - -static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 capability, u16 beacon_period, u8 channel, u8 rssi, - u8 ssid_len, u8 *ssid, int is_beacon) +static void store_bss_info(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, u16 capability, + u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, + u8 *ssid, int is_beacon) { u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3; int i, index; - - for (index = -1, i = 0; i < priv->BSS_list_entries; i++) - if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0) + + for (index = -1, i = 0; i < priv->BSS_list_entries; i++) + if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0) index = i; - /* If we process a probe and an entry from this BSS exists + /* If we process a probe and an entry from this BSS exists we will update the BSS entry with the info from this BSS. If we process a beacon we will only update RSSI */ @@ -2820,8 +2835,8 @@ static void store_bss_info(struct atmel_private *priv, struct ieee80211_hdr_4add priv->BSSinfo[index].BSStype = IW_MODE_ADHOC; else if (capability & C80211_MGMT_CAPABILITY_ESS) priv->BSSinfo[index].BSStype =IW_MODE_INFRA; - - priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + + priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? SHORT_PREAMBLE : LONG_PREAMBLE; } @@ -2831,8 +2846,8 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) u16 status = le16_to_cpu(auth->status); u16 trans_seq_no = le16_to_cpu(auth->trans_seq); u16 system = le16_to_cpu(auth->alg); - - if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { + + if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { /* no WEP */ if (priv->station_was_associated) { atmel_enter_state(priv, STATION_STATE_REASSOCIATING); @@ -2842,20 +2857,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) atmel_enter_state(priv, STATION_STATE_ASSOCIATING); send_association_request(priv, 0); return; - } + } } - - if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { + + if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { /* WEP */ if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum) return; - + if (trans_seq_no == 0x0002 && auth->el_id == C80211_MGMT_ElementID_ChallengeText) { send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len); return; } - + if (trans_seq_no == 0x0004) { if(priv->station_was_associated) { atmel_enter_state(priv, STATION_STATE_REASSOCIATING); @@ -2865,10 +2880,10 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) atmel_enter_state(priv, STATION_STATE_ASSOCIATING); send_association_request(priv, 0); return; - } + } } - } - + } + if (status == C80211_MGMT_SC_AuthAlgNotSupported) { /* Do opensystem first, then try sharedkey */ if (system == C80211_MGMT_AAN_OPENSYSTEM) { @@ -2876,17 +2891,16 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0); } else if (priv->connect_to_any_BSS) { int bss_index; - + priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - + if ((bss_index = retrieve_bss(priv)) != -1) { atmel_join_bss(priv, bss_index); return; } } } - - + priv->AuthenticationRequestRetryCnt = 0; atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; @@ -2902,38 +2916,44 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) u8 length; u8 rates[4]; } *ass_resp = (struct ass_resp_format *)priv->rx_buf; - - u16 status = le16_to_cpu(ass_resp->status); + + u16 status = le16_to_cpu(ass_resp->status); u16 ass_id = le16_to_cpu(ass_resp->ass_id); - u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length; - + u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length; + if (frame_len < 8 + rates_len) return; - + if (status == C80211_MGMT_SC_Success) { if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE) priv->AssociationRequestRetryCnt = 0; else priv->ReAssociationRequestRetryCnt = 0; - - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff); - atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len); + + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff); + atmel_set_mib(priv, Phy_Mib_Type, + PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len); if (priv->power_mode == 0) { priv->listen_interval = 1; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); } else { priv->listen_interval = 2; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, PS_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, PS_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2); } - + priv->station_is_associated = 1; priv->station_was_associated = 1; atmel_enter_state(priv, STATION_STATE_READY); return; } - + if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE && status != C80211_MGMT_SC_AssDeniedBSSRate && status != C80211_MGMT_SC_SupportCapabilities && @@ -2943,7 +2963,7 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) send_association_request(priv, 0); return; } - + if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE && status != C80211_MGMT_SC_AssDeniedBSSRate && status != C80211_MGMT_SC_SupportCapabilities && @@ -2953,17 +2973,16 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) send_association_request(priv, 1); return; } - + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; - - if(priv->connect_to_any_BSS) { + + if (priv->connect_to_any_BSS) { int bss_index; priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - - if ((bss_index = retrieve_bss(priv)) != -1) + + if ((bss_index = retrieve_bss(priv)) != -1) atmel_join_bss(priv, bss_index); - } } @@ -2977,7 +2996,7 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) /* The WPA stuff cares about the current AP address */ if (priv->use_wpa) build_wpa_mib(priv); - + /* When switching to AdHoc turn OFF Power Save if needed */ if (bss->BSStype == IW_MODE_ADHOC && @@ -2985,25 +3004,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) priv->power_mode) { priv->power_mode = 0; priv->listen_interval = 1; - atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); - atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); + atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); + atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, + MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); } - + priv->operating_mode = bss->BSStype; - priv->channel = bss->channel & 0x7f; + priv->channel = bss->channel & 0x7f; priv->beacon_period = bss->beacon_period; - + if (priv->preamble != bss->preamble) { priv->preamble = bss->preamble; - atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, bss->preamble); + atmel_set_mib8(priv, Local_Mib_Type, + LOCAL_MIB_PREAMBLE_TYPE, bss->preamble); } - + if (!priv->wep_is_on && bss->UsingWEP) { atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; return; } - + if (priv->wep_is_on && !bss->UsingWEP) { atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); priv->station_is_associated = 0; @@ -3011,30 +3033,28 @@ void atmel_join_bss(struct atmel_private *priv, int bss_index) } atmel_enter_state(priv, STATION_STATE_JOINNING); - + if (priv->operating_mode == IW_MODE_INFRA) join(priv, BSS_TYPE_INFRASTRUCTURE); - else + else join(priv, BSS_TYPE_AD_HOC); } - static void restart_search(struct atmel_private *priv) { int bss_index; - + if (!priv->connect_to_any_BSS) { atmel_scan(priv, 1); } else { priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80; - - if ((bss_index = retrieve_bss(priv)) != -1) + + if ((bss_index = retrieve_bss(priv)) != -1) atmel_join_bss(priv, bss_index); else atmel_scan(priv, 0); - - } -} + } +} static void smooth_rssi(struct atmel_private *priv, u8 rssi) { @@ -3050,21 +3070,21 @@ static void smooth_rssi(struct atmel_private *priv, u8 rssi) } rssi = rssi * 100 / max_rssi; - if((rssi + old) % 2) - priv->wstats.qual.level = ((rssi + old)/2) + 1; + if ((rssi + old) % 2) + priv->wstats.qual.level = (rssi + old) / 2 + 1; else - priv->wstats.qual.level = ((rssi + old)/2); + priv->wstats.qual.level = (rssi + old) / 2; priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED; priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID; } static void atmel_smooth_qual(struct atmel_private *priv) { - unsigned long time_diff = (jiffies - priv->last_qual)/HZ; + unsigned long time_diff = (jiffies - priv->last_qual) / HZ; while (time_diff--) { priv->last_qual += HZ; - priv->wstats.qual.qual = priv->wstats.qual.qual/2; - priv->wstats.qual.qual += + priv->wstats.qual.qual = priv->wstats.qual.qual / 2; + priv->wstats.qual.qual += priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000; priv->beacons_this_sec = 0; } @@ -3073,15 +3093,17 @@ static void atmel_smooth_qual(struct atmel_private *priv) } /* deals with incoming managment frames. */ -static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_hdr_4addr *header, - u16 frame_len, u8 rssi) +static void atmel_management_frame(struct atmel_private *priv, + struct ieee80211_hdr_4addr *header, + u16 frame_len, u8 rssi) { u16 subtype; - - switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE) { - case C80211_SUBTYPE_MGMT_BEACON : + + subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE; + switch (subtype) { + case C80211_SUBTYPE_MGMT_BEACON: case C80211_SUBTYPE_MGMT_ProbeResponse: - + /* beacon frame has multiple variable-length fields - never let an engineer loose with a data structure design. */ { @@ -3099,7 +3121,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ u8 ds_length; /* ds here */ } *beacon = (struct beacon_format *)priv->rx_buf; - + u8 channel, rates_length, ssid_length; u64 timestamp = le64_to_cpu(beacon->timestamp); u16 beacon_interval = le16_to_cpu(beacon->interval); @@ -3107,7 +3129,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ u8 *beaconp = priv->rx_buf; ssid_length = beacon->ssid_length; /* this blows chunks. */ - if (frame_len < 14 || frame_len < ssid_length + 15) + if (frame_len < 14 || frame_len < ssid_length + 15) return; rates_length = beaconp[beacon->ssid_length + 15]; if (frame_len < ssid_length + rates_length + 18) @@ -3115,10 +3137,10 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ if (ssid_length > MAX_SSID_LENGTH) return; channel = beaconp[ssid_length + rates_length + 18]; - + if (priv->station_state == STATION_STATE_READY) { smooth_rssi(priv, rssi); - if (is_frame_from_current_bss(priv, header)) { + if (is_frame_from_current_bss(priv, header)) { priv->beacons_this_sec++; atmel_smooth_qual(priv); if (priv->last_beacon_timestamp) { @@ -3132,41 +3154,43 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ handle_beacon_probe(priv, capability, channel); } } - - if (priv->station_state == STATION_STATE_SCANNING ) - store_bss_info(priv, header, capability, beacon_interval, channel, - rssi, ssid_length, &beacon->rates_el_id, - subtype == C80211_SUBTYPE_MGMT_BEACON) ; + + if (priv->station_state == STATION_STATE_SCANNING) + store_bss_info(priv, header, capability, + beacon_interval, channel, rssi, + ssid_length, + &beacon->rates_el_id, + subtype == C80211_SUBTYPE_MGMT_BEACON); } break; - + case C80211_SUBTYPE_MGMT_Authentication: if (priv->station_state == STATION_STATE_AUTHENTICATING) authenticate(priv, frame_len); - + break; - + case C80211_SUBTYPE_MGMT_ASS_RESPONSE: case C80211_SUBTYPE_MGMT_REASS_RESPONSE: - - if (priv->station_state == STATION_STATE_ASSOCIATING || + + if (priv->station_state == STATION_STATE_ASSOCIATING || priv->station_state == STATION_STATE_REASSOCIATING) associate(priv, frame_len, subtype); - + break; case C80211_SUBTYPE_MGMT_DISASSOSIATION: - if (priv->station_is_associated && - priv->operating_mode == IW_MODE_INFRA && + if (priv->station_is_associated && + priv->operating_mode == IW_MODE_INFRA && is_frame_from_current_bss(priv, header)) { priv->station_was_associated = 0; priv->station_is_associated = 0; - + atmel_enter_state(priv, STATION_STATE_JOINNING); join(priv, BSS_TYPE_INFRASTRUCTURE); } - + break; case C80211_SUBTYPE_MGMT_Deauthentication: @@ -3177,7 +3201,7 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ atmel_enter_state(priv, STATION_STATE_JOINNING); join(priv, BSS_TYPE_INFRASTRUCTURE); } - + break; } } @@ -3185,76 +3209,73 @@ static void atmel_management_frame(struct atmel_private *priv, struct ieee80211_ /* run when timer expires */ static void atmel_management_timer(u_long a) { - struct net_device *dev = (struct net_device *) a; - struct atmel_private *priv = netdev_priv(dev); - unsigned long flags; - - /* Check if the card has been yanked. */ - if (priv->card && priv->present_callback && - !(*priv->present_callback)(priv->card)) - return; - - spin_lock_irqsave(&priv->irqlock, flags); - - switch (priv->station_state) { - - case STATION_STATE_AUTHENTICATING: - if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->AuthenticationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->AuthenticationRequestRetryCnt++; - priv->CurrentAuthentTransactionSeqNum = 0x0001; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0); - } - - break; + struct net_device *dev = (struct net_device *) a; + struct atmel_private *priv = netdev_priv(dev); + unsigned long flags; - case STATION_STATE_ASSOCIATING: - if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->AssociationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->AssociationRequestRetryCnt++; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_association_request(priv, 0); - } + /* Check if the card has been yanked. */ + if (priv->card && priv->present_callback && + !(*priv->present_callback)(priv->card)) + return; - break; - - case STATION_STATE_REASSOCIATING: - if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { - atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); - priv->station_is_associated = 0; - priv->ReAssociationRequestRetryCnt = 0; - restart_search(priv); - } else { - priv->ReAssociationRequestRetryCnt++; - mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); - send_association_request(priv, 1); - } + spin_lock_irqsave(&priv->irqlock, flags); + + switch (priv->station_state) { + case STATION_STATE_AUTHENTICATING: + if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AuthenticationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AuthenticationRequestRetryCnt++; + priv->CurrentAuthentTransactionSeqNum = 0x0001; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0); + } break; - - default: + + case STATION_STATE_ASSOCIATING: + if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->AssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->AssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 0); + } break; - } - - spin_unlock_irqrestore(&priv->irqlock, flags); + + case STATION_STATE_REASSOCIATING: + if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) { + atmel_enter_state(priv, STATION_STATE_MGMT_ERROR); + priv->station_is_associated = 0; + priv->ReAssociationRequestRetryCnt = 0; + restart_search(priv); + } else { + priv->ReAssociationRequestRetryCnt++; + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); + send_association_request(priv, 1); + } + break; + + default: + break; + } + + spin_unlock_irqrestore(&priv->irqlock, flags); } - + static void atmel_command_irq(struct atmel_private *priv) { u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET)); int fast_scan; - - if (status == CMD_STATUS_IDLE || + + if (status == CMD_STATUS_IDLE || status == CMD_STATUS_IN_PROGRESS) return; @@ -3266,20 +3287,20 @@ static void atmel_command_irq(struct atmel_private *priv) atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS, (u8 *)priv->CurrentBSSID, 6); atmel_enter_state(priv, STATION_STATE_READY); - } + } break; - + case CMD_Scan: fast_scan = priv->fast_scan; priv->fast_scan = 0; - + if (status != CMD_STATUS_COMPLETE) { atmel_scan(priv, 1); } else { int bss_index = retrieve_bss(priv); if (bss_index != -1) { atmel_join_bss(priv, bss_index); - } else if (priv->operating_mode == IW_MODE_ADHOC && + } else if (priv->operating_mode == IW_MODE_ADHOC && priv->SSID_size != 0) { start(priv, BSS_TYPE_AD_HOC); } else { @@ -3289,16 +3310,16 @@ static void atmel_command_irq(struct atmel_private *priv) priv->site_survey_state = SITE_SURVEY_COMPLETED; } break; - + case CMD_SiteSurvey: priv->fast_scan = 0; - + if (status != CMD_STATUS_COMPLETE) return; - + priv->site_survey_state = SITE_SURVEY_COMPLETED; if (priv->station_is_associated) { - atmel_enter_state(priv, STATION_STATE_READY); + atmel_enter_state(priv, STATION_STATE_READY); } else { atmel_scan(priv, 1); } @@ -3312,16 +3333,15 @@ static void atmel_command_irq(struct atmel_private *priv) } else { priv->AuthenticationRequestRetryCnt = 0; atmel_enter_state(priv, STATION_STATE_AUTHENTICATING); - + mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); priv->CurrentAuthentTransactionSeqNum = 0x0001; send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0); } return; } - + atmel_scan(priv, 1); - } } @@ -3333,20 +3353,20 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) if (priv->card_type == CARD_TYPE_SPI_FLASH) atmel_set_gcr(priv->dev, GCR_REMAP); - + /* wake up on-board processor */ atmel_clear_gcr(priv->dev, 0x0040); atmel_write16(priv->dev, BSR, BSS_SRAM); - + if (priv->card_type == CARD_TYPE_SPI_FLASH) mdelay(100); /* and wait for it */ - for (i = LOOP_RETRY_LIMIT; i; i--) { + for (i = LOOP_RETRY_LIMIT; i; i--) { mr1 = atmel_read16(priv->dev, MR1); mr3 = atmel_read16(priv->dev, MR3); - - if (mr3 & MAC_BOOT_COMPLETE) + + if (mr3 & MAC_BOOT_COMPLETE) break; if (mr1 & MAC_BOOT_COMPLETE && priv->bus_type == BUS_TYPE_PCCARD) @@ -3357,35 +3377,36 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name); return 0; } - + if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) { printk(KERN_ALERT "%s: card missing.\n", priv->dev->name); return 0; } - - /* now check for completion of MAC initialization through - the FunCtrl field of the IFACE, poll MR1 to detect completion of - MAC initialization, check completion status, set interrupt mask, - enables interrupts and calls Tx and Rx initialization functions */ - + + /* now check for completion of MAC initialization through + the FunCtrl field of the IFACE, poll MR1 to detect completion of + MAC initialization, check completion status, set interrupt mask, + enables interrupts and calls Tx and Rx initialization functions */ + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE); - - for (i = LOOP_RETRY_LIMIT; i; i--) { + + for (i = LOOP_RETRY_LIMIT; i; i--) { mr1 = atmel_read16(priv->dev, MR1); mr3 = atmel_read16(priv->dev, MR3); - - if (mr3 & MAC_INIT_COMPLETE) + + if (mr3 & MAC_INIT_COMPLETE) break; if (mr1 & MAC_INIT_COMPLETE && priv->bus_type == BUS_TYPE_PCCARD) break; } - + if (i == 0) { - printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name); + printk(KERN_ALERT "%s: MAC failed to initialise.\n", + priv->dev->name); return 0; } - + /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */ if ((mr3 & MAC_INIT_COMPLETE) && !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) { @@ -3398,9 +3419,9 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) return 0; } - atmel_copy_to_host(priv->dev, (unsigned char *)iface, + atmel_copy_to_host(priv->dev, (unsigned char *)iface, priv->host_info_base, sizeof(*iface)); - + iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos); iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size); iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos); @@ -3424,16 +3445,16 @@ static int probe_atmel_card(struct net_device *dev) { int rc = 0; struct atmel_private *priv = netdev_priv(dev); - + /* reset pccard */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); - + atmel_write16(dev, GCR, 0x0040); mdelay(500); - + if (atmel_read16(dev, MR2) == 0) { - /* No stored firmware so load a small stub which just + /* No stored firmware so load a small stub which just tells us the MAC address */ int i; priv->card_type = CARD_TYPE_EEPROM; @@ -3442,7 +3463,7 @@ static int probe_atmel_card(struct net_device *dev) atmel_set_gcr(dev, GCR_REMAP); atmel_clear_gcr(priv->dev, 0x0040); atmel_write16(dev, BSR, BSS_SRAM); - for (i = LOOP_RETRY_LIMIT; i; i--) + for (i = LOOP_RETRY_LIMIT; i; i--) if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE) break; if (i == 0) { @@ -3451,7 +3472,7 @@ static int probe_atmel_card(struct net_device *dev) atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6); /* got address, now squash it again until the network interface is opened */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); rc = 1; @@ -3459,7 +3480,7 @@ static int probe_atmel_card(struct net_device *dev) } else if (atmel_read16(dev, MR4) == 0) { /* Mac address easy in this case. */ priv->card_type = CARD_TYPE_PARALLEL_FLASH; - atmel_write16(dev, BSR, 1); + atmel_write16(dev, BSR, 1); atmel_copy_to_host(dev, dev->dev_addr, 0xc000, 6); atmel_write16(dev, BSR, 0x200); rc = 1; @@ -3469,16 +3490,16 @@ static int probe_atmel_card(struct net_device *dev) priv->card_type = CARD_TYPE_SPI_FLASH; if (atmel_wakeup_firmware(priv)) { atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6); - + /* got address, now squash it again until the network interface is opened */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(dev, GCR, 0x0060); atmel_write16(dev, GCR, 0x0040); rc = 1; } } - + if (rc) { if (dev->dev_addr[0] == 0xFF) { u8 default_mac[] = {0x00,0x04, 0x25, 0x00, 0x00, 0x00}; @@ -3486,27 +3507,27 @@ static int probe_atmel_card(struct net_device *dev) memcpy(dev->dev_addr, default_mac, 6); } } - + return rc; } -static void build_wep_mib(struct atmel_private *priv) /* Move the encyption information on the MIB structure. This routine is for the pre-WPA firmware: later firmware has a different format MIB and a different routine. */ +static void build_wep_mib(struct atmel_private *priv) { struct { /* NB this is matched to the hardware, don't change. */ - u8 wep_is_on; + u8 wep_is_on; u8 default_key; /* 0..3 */ u8 reserved; u8 exclude_unencrypted; - + u32 WEPICV_error_count; u32 WEP_excluded_count; - + u8 wep_keys[MAX_ENCRYPTION_KEYS][13]; - u8 encryption_level; /* 0, 1, 2 */ - u8 reserved2[3]; + u8 encryption_level; /* 0, 1, 2 */ + u8 reserved2[3]; } mib; int i; @@ -3515,54 +3536,55 @@ static void build_wep_mib(struct atmel_private *priv) if (priv->wep_key_len[priv->default_key] > 5) mib.encryption_level = 2; else - mib.encryption_level = 1; + mib.encryption_level = 1; } else { mib.encryption_level = 0; } mib.default_key = priv->default_key; mib.exclude_unencrypted = priv->exclude_unencrypted; - - for(i = 0; i < MAX_ENCRYPTION_KEYS; i++) + + for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) memcpy(mib.wep_keys[i], priv->wep_keys[i], 13); - + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); } static void build_wpa_mib(struct atmel_private *priv) { - /* This is for the later (WPA enabled) firmware. */ + /* This is for the later (WPA enabled) firmware. */ struct { /* NB this is matched to the hardware, don't change. */ u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE]; u8 receiver_address[6]; - u8 wep_is_on; + u8 wep_is_on; u8 default_key; /* 0..3 */ u8 group_key; u8 exclude_unencrypted; u8 encryption_type; u8 reserved; - + u32 WEPICV_error_count; u32 WEP_excluded_count; - + u8 key_RSC[4][8]; } mib; - + int i; mib.wep_is_on = priv->wep_is_on; mib.exclude_unencrypted = priv->exclude_unencrypted; memcpy(mib.receiver_address, priv->CurrentBSSID, 6); - + /* zero all the keys before adding in valid ones. */ memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value)); - + if (priv->wep_is_on) { - /* There's a comment in the Atmel code to the effect that this is only valid - when still using WEP, it may need to be set to something to use WPA */ + /* There's a comment in the Atmel code to the effect that this + is only valid when still using WEP, it may need to be set to + something to use WPA */ memset(mib.key_RSC, 0, sizeof(mib.key_RSC)); - + mib.default_key = mib.group_key = 255; for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) { if (priv->wep_key_len[i] > 0) { @@ -3570,12 +3592,12 @@ static void build_wpa_mib(struct atmel_private *priv) if (i == priv->default_key) { mib.default_key = i; mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7; - mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite; } else { mib.group_key = i; priv->group_cipher_suite = priv->pairwise_cipher_suite; mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1; - mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite; + mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite; } } } @@ -3583,47 +3605,47 @@ static void build_wpa_mib(struct atmel_private *priv) mib.default_key = mib.group_key != 255 ? mib.group_key : 0; if (mib.group_key == 255) mib.group_key = mib.default_key; - + } - + atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib)); } - -static int reset_atmel_card(struct net_device *dev) + +static int reset_atmel_card(struct net_device *dev) { /* do everything necessary to wake up the hardware, including waiting for the lightning strike and throwing the knife switch.... - set all the Mib values which matter in the card to match + set all the Mib values which matter in the card to match their settings in the atmel_private structure. Some of these can be altered on the fly, but many (WEP, infrastucture or ad-hoc) can only be changed by tearing down the world and coming back through here. - This routine is also responsible for initialising some - hardware-specific fields in the atmel_private structure, + This routine is also responsible for initialising some + hardware-specific fields in the atmel_private structure, including a copy of the firmware's hostinfo stucture which is the route into the rest of the firmare datastructures. */ struct atmel_private *priv = netdev_priv(dev); u8 configuration; - + /* data to add to the firmware names, in priority order this implemenents firmware versioning */ - + static char *firmware_modifier[] = { "-wpa", "", NULL }; - + /* reset pccard */ - if (priv->bus_type == BUS_TYPE_PCCARD) + if (priv->bus_type == BUS_TYPE_PCCARD) atmel_write16(priv->dev, GCR, 0x0060); - + /* stop card , disable interrupts */ atmel_write16(priv->dev, GCR, 0x0040); - + if (priv->card_type == CARD_TYPE_EEPROM) { /* copy in firmware if needed */ const struct firmware *fw_entry = NULL; @@ -3636,13 +3658,13 @@ static int reset_atmel_card(struct net_device *dev) "%s: card type is unknown: assuming at76c502 firmware is OK.\n", dev->name); printk(KERN_INFO - "%s: if not, use the firmware= module parameter.\n", + "%s: if not, use the firmware= module parameter.\n", dev->name); strcpy(priv->firmware_id, "atmel_at76c502.bin"); } if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) { - printk(KERN_ALERT - "%s: firmware %s is missing, cannot continue.\n", + printk(KERN_ALERT + "%s: firmware %s is missing, cannot continue.\n", dev->name, priv->firmware_id); return 0; } @@ -3654,7 +3676,7 @@ static int reset_atmel_card(struct net_device *dev) while (fw_table[fw_index].fw_type != priv->firmware_type && fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) fw_index++; - + /* construct the actual firmware file name */ if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) { int i; @@ -3669,24 +3691,24 @@ static int reset_atmel_card(struct net_device *dev) } } if (!success) { - printk(KERN_ALERT - "%s: firmware %s is missing, cannot start.\n", + printk(KERN_ALERT + "%s: firmware %s is missing, cannot start.\n", dev->name, priv->firmware_id); priv->firmware_id[0] = '\0'; - return 0; + return 0; } } - + fw = fw_entry->data; len = fw_entry->size; } - + if (len <= 0x6000) { atmel_write16(priv->dev, BSR, BSS_IRAM); atmel_copy_to_card(priv->dev, 0, fw, len); atmel_set_gcr(priv->dev, GCR_REMAP); } else { - /* Remap */ + /* Remap */ atmel_set_gcr(priv->dev, GCR_REMAP); atmel_write16(priv->dev, BSR, BSS_IRAM); atmel_copy_to_card(priv->dev, 0, fw, 0x6000); @@ -3708,45 +3730,45 @@ static int reset_atmel_card(struct net_device *dev) the 3com broken-ness filter. */ priv->use_wpa = (priv->host_info.major_version == 4); priv->radio_on_broken = (priv->host_info.major_version == 5); - + /* unmask all irq sources */ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff); - + /* int Tx system and enable Tx */ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0); atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0); atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0); - priv->tx_desc_free = priv->host_info.tx_desc_count; - priv->tx_desc_head = 0; - priv->tx_desc_tail = 0; + priv->tx_desc_free = priv->host_info.tx_desc_count; + priv->tx_desc_head = 0; + priv->tx_desc_tail = 0; priv->tx_desc_previous = 0; priv->tx_free_mem = priv->host_info.tx_buff_size; - priv->tx_buff_head = 0; - priv->tx_buff_tail = 0; - - configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); - atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + priv->tx_buff_head = 0; + priv->tx_buff_tail = 0; + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), configuration | FUNC_CTRL_TxENABLE); /* init Rx system and enable */ priv->rx_desc_head = 0; - - configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); - atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), + + configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET)); + atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), configuration | FUNC_CTRL_RxENABLE); - + if (!priv->radio_on_broken) { - if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == + if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == CMD_STATUS_REJECTED_RADIO_OFF) { - printk(KERN_INFO + printk(KERN_INFO "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n", dev->name); return 0; } } - + /* set up enough MIB values to run. */ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate); atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF); @@ -3755,7 +3777,7 @@ static int reset_atmel_card(struct net_device *dev) atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry); atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry); atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble); - atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS, + atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS, priv->dev->dev_addr, 6); atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE); atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1); @@ -3766,42 +3788,44 @@ static int reset_atmel_card(struct net_device *dev) build_wpa_mib(priv); else build_wep_mib(priv); - + return 1; } -static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size) +static void atmel_send_command(struct atmel_private *priv, int command, + void *cmd, int cmd_size) { if (cmd) - atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET), + atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET), cmd, cmd_size); - + atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command); atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0); } - -static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size) + +static int atmel_send_command_wait(struct atmel_private *priv, int command, + void *cmd, int cmd_size) { int i, status; - + atmel_send_command(priv, command, cmd, cmd_size); - + for (i = 5000; i; i--) { status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET)); - if (status != CMD_STATUS_IDLE && + if (status != CMD_STATUS_IDLE && status != CMD_STATUS_IN_PROGRESS) break; udelay(20); } - + if (i == 0) { printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name); status = CMD_STATUS_HOST_ERROR; - } else { + } else { if (command != CMD_EnableRadio) status = CMD_STATUS_COMPLETE; } - + return status; } @@ -3827,7 +3851,8 @@ static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 dat atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1); } -static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data) +static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, + u16 data) { struct get_set_mib m; m.type = type; @@ -3839,7 +3864,8 @@ static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 d atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2); } -static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len) { struct get_set_mib m; m.type = type; @@ -3848,23 +3874,24 @@ static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *dat if (data_len > MIB_MAX_DATA_BYTES) printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); - + memcpy(m.data, data, data_len); atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); } -static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len) +static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, + u8 *data, int data_len) { struct get_set_mib m; m.type = type; m.size = data_len; m.index = index; - + if (data_len > MIB_MAX_DATA_BYTES) printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name); - + atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len); - atmel_copy_to_host(priv->dev, data, + atmel_copy_to_host(priv->dev, data, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len); } @@ -3873,11 +3900,12 @@ static void atmel_writeAR(struct net_device *dev, u16 data) int i; outw(data, dev->base_addr + AR); /* Address register appears to need some convincing..... */ - for (i = 0; data != inw(dev->base_addr + AR) && i<10; i++) + for (i = 0; data != inw(dev->base_addr + AR) && i < 10; i++) outw(data, dev->base_addr + AR); } -static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len) +static void atmel_copy_to_card(struct net_device *dev, u16 dest, + unsigned char *src, u16 len) { int i; atmel_writeAR(dev, dest); @@ -3894,7 +3922,8 @@ static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char * atmel_write8(dev, DR, *src); } -static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len) +static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, + u16 src, u16 len) { int i; atmel_writeAR(dev, src); @@ -3930,22 +3959,24 @@ static int atmel_lock_mac(struct atmel_private *priv) break; udelay(20); } - - if (!i) return 0; /* timed out */ - + + if (!i) + return 0; /* timed out */ + atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1); if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) { atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0); - if (!j--) return 0; /* timed out */ + if (!j--) + return 0; /* timed out */ goto retry; } - + return 1; } static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) { - atmel_writeAR(priv->dev, pos); + atmel_writeAR(priv->dev, pos); atmel_write16(priv->dev, DR, data); /* card is little-endian */ atmel_write16(priv->dev, DR, data >> 16); } @@ -4017,9 +4048,9 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) serial output, since SO is normally high. But it does cause 8 clock cycles and thus 8 bits to be clocked in to the chip. See Atmel's SPI - controller (e.g. AT91M55800) timing and 4K + controller (e.g. AT91M55800) timing and 4K SPI EEPROM manuals */ - + .set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */ .set NVRAM_IMAGE, 0x02000200 .set NVRAM_LENGTH, 0x0200 @@ -4032,24 +4063,24 @@ static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data) .set MR4, 0xC RESET_VECTOR: b RESET_HANDLER -UNDEF_VECTOR: +UNDEF_VECTOR: b HALT1 -SWI_VECTOR: +SWI_VECTOR: b HALT1 -IABORT_VECTOR: +IABORT_VECTOR: b HALT1 -DABORT_VECTOR: -RESERVED_VECTOR: +DABORT_VECTOR: +RESERVED_VECTOR: b HALT1 -IRQ_VECTOR: +IRQ_VECTOR: b HALT1 -FIQ_VECTOR: +FIQ_VECTOR: b HALT1 HALT1: b HALT1 RESET_HANDLER: mov r0, #CPSR_INITIAL msr CPSR_c, r0 /* This is probably unnecessary */ - + /* I'm guessing this is initializing clock generator electronics for SPI */ ldr r0, =SPI_CGEN_BASE mov r1, #0 @@ -4061,7 +4092,7 @@ RESET_HANDLER: str r1, [r0, #28] mov r1, #1 str r1, [r0, #8] - + ldr r0, =MRBASE mov r1, #0 strh r1, [r0, #MR1] @@ -4094,7 +4125,7 @@ GET_WHOLE_NVRAM: ldmia sp!, {lr} bx lr .endfunc - + .func Get_MAC_Addr, GET_MAC_ADDR GET_MAC_ADDR: stmdb sp!, {lr} @@ -4110,13 +4141,13 @@ GET_MAC_ADDR: .func Delay9, DELAY9 DELAY9: adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */ -DELAYLOOP: +DELAYLOOP: beq DELAY9_done subs r0, r0, #1 b DELAYLOOP -DELAY9_done: +DELAY9_done: bx lr -.endfunc +.endfunc .func SP_Init, SP_INIT SP_INIT: @@ -4145,26 +4176,26 @@ SP_INIT: ldr r0, [r0, #SP_RDR] bx lr .endfunc -.func NVRAM_Init, NVRAM_INIT +.func NVRAM_Init, NVRAM_INIT NVRAM_INIT: ldr r1, =SP_BASE ldr r0, [r1, #SP_RDR] mov r0, #NVRAM_CMD_RDSR str r0, [r1, #SP_TDR] -SP_loop1: +SP_loop1: ldr r0, [r1, #SP_SR] tst r0, #SP_TDRE beq SP_loop1 mov r0, #SPI_8CLOCKS - str r0, [r1, #SP_TDR] -SP_loop2: + str r0, [r1, #SP_TDR] +SP_loop2: ldr r0, [r1, #SP_SR] tst r0, #SP_TDRE beq SP_loop2 ldr r0, [r1, #SP_RDR] -SP_loop3: +SP_loop3: ldr r0, [r1, #SP_SR] tst r0, #SP_RDRF beq SP_loop3 @@ -4173,7 +4204,7 @@ SP_loop3: and r0, r0, #255 bx lr .endfunc - + .func NVRAM_Xfer, NVRAM_XFER /* r0 = dest address */ /* r1 = not used */ @@ -4185,11 +4216,11 @@ NVRAM_XFER: mov r4, r3 /* save r3 (length) */ mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */ and r0, r0, #8 - add r0, r0, #NVRAM_CMD_READ + add r0, r0, #NVRAM_CMD_READ ldr r1, =NVRAM_SCRATCH strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */ strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */ -_local1: +_local1: bl NVRAM_INIT tst r0, #NVRAM_SR_RDY bne _local1 @@ -4211,7 +4242,7 @@ NVRAM_XFER2: cmp r0, #0 bls _local2 ldr r5, =NVRAM_SCRATCH -_local4: +_local4: ldrb r6, [r5, r3] str r6, [r4, #SP_TDR] _local3: @@ -4225,7 +4256,7 @@ _local2: mov r3, #SPI_8CLOCKS str r3, [r4, #SP_TDR] ldr r0, [r4, #SP_RDR] -_local5: +_local5: ldr r0, [r4, #SP_SR] tst r0, #SP_RDRF beq _local5 @@ -4233,12 +4264,12 @@ _local5: mov r0, #0 cmp r2, #0 /* r2 is # of bytes to copy in */ bls _local6 -_local7: +_local7: ldr r5, [r4, #SP_SR] tst r5, #SP_TDRE beq _local7 str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */ -_local8: +_local8: ldr r5, [r4, #SP_SR] tst r5, #SP_RDRF beq _local8 -- cgit v1.2.3-70-g09d2 From 5bc4c36d7cd9f1605efeade67b3d27845a4affcd Mon Sep 17 00:00:00 2001 From: Christophe Lucas Date: Sat, 12 Nov 2005 21:58:53 +0300 Subject: [PATCH] atmel: audit return code of create_proc_read_entry Signed-off-by: Christophe Lucas Signed-off-by: Alexey Dobriyan Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 050aa518d7d..e4729ddf29f 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1511,6 +1511,7 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, struct device *sys_dev, int (*card_present)(void *), void *card) { + struct proc_dir_entry *ent; struct net_device *dev; struct atmel_private *priv; int rc; @@ -1624,7 +1625,9 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, netif_carrier_off(dev); - create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); + ent = create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv); + if (!ent) + printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", dev->name, DRIVER_MAJOR, DRIVER_MINOR, -- cgit v1.2.3-70-g09d2 From 7635d345b2c047339b44c85fff486c6b94b67216 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 13 Nov 2005 13:26:25 -0500 Subject: [PATCH] hostap: rename hostap.c to hostap_main.c I wanted to remove the #include "hostap_ioctl.c" from hostap.c and build hostap_ioctl.c separately, but this doesn't work since hostap.c has the same name as the module. After renaming hostap.c this will be possible. Signed-off-by: Adrian Bunk Acked-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/Makefile | 1 + drivers/net/wireless/hostap/hostap.c | 1191 ----------------------------- drivers/net/wireless/hostap/hostap_main.c | 1191 +++++++++++++++++++++++++++++ 3 files changed, 1192 insertions(+), 1191 deletions(-) delete mode 100644 drivers/net/wireless/hostap/hostap.c create mode 100644 drivers/net/wireless/hostap/hostap_main.c (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/Makefile b/drivers/net/wireless/hostap/Makefile index fc62235bfc2..353ccb93134 100644 --- a/drivers/net/wireless/hostap/Makefile +++ b/drivers/net/wireless/hostap/Makefile @@ -1,3 +1,4 @@ +hostap-y := hostap_main.o obj-$(CONFIG_HOSTAP) += hostap.o obj-$(CONFIG_HOSTAP_CS) += hostap_cs.o diff --git a/drivers/net/wireless/hostap/hostap.c b/drivers/net/wireless/hostap/hostap.c deleted file mode 100644 index 3d2ea61033b..00000000000 --- a/drivers/net/wireless/hostap/hostap.c +++ /dev/null @@ -1,1191 +0,0 @@ -/* - * Host AP (software wireless LAN access point) driver for - * Intersil Prism2/2.5/3 - hostap.o module, common routines - * - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * - * Copyright (c) 2002-2005, Jouni Malinen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. See README and COPYING for - * more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hostap_wlan.h" -#include "hostap_80211.h" -#include "hostap_ap.h" -#include "hostap.h" - -MODULE_AUTHOR("Jouni Malinen"); -MODULE_DESCRIPTION("Host AP common routines"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(PRISM2_VERSION); - -#define TX_TIMEOUT (2 * HZ) - -#define PRISM2_MAX_FRAME_SIZE 2304 -#define PRISM2_MIN_MTU 256 -/* FIX: */ -#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */)) - - -/* hostap.c */ -static int prism2_wds_add(local_info_t *local, u8 *remote_addr, - int rtnl_locked); -static int prism2_wds_del(local_info_t *local, u8 *remote_addr, - int rtnl_locked, int do_not_remove); - -/* hostap_ap.c */ -static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], - struct iw_quality qual[], int buf_size, - int aplist); -static int prism2_ap_translate_scan(struct net_device *dev, char *buffer); -static int prism2_hostapd(struct ap_data *ap, - struct prism2_hostapd_param *param); -static void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, - struct ieee80211_crypt_data ***crypt); -static void ap_control_kickall(struct ap_data *ap); -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT -static int ap_control_add_mac(struct mac_restrictions *mac_restrictions, - u8 *mac); -static int ap_control_del_mac(struct mac_restrictions *mac_restrictions, - u8 *mac); -static void ap_control_flush_macs(struct mac_restrictions *mac_restrictions); -static int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, - u8 *mac); -#endif /* !PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - -static const long freq_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, - 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; -#define FREQ_COUNT (sizeof(freq_list) / sizeof(freq_list[0])) - - -/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ -/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -static unsigned char rfc1042_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; -/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -static unsigned char bridge_tunnel_header[] = -{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -/* No encapsulation header if EtherType < 0x600 (=length) */ - - -/* FIX: these could be compiled separately and linked together to hostap.o */ -#include "hostap_ap.c" -#include "hostap_info.c" -#include "hostap_ioctl.c" -#include "hostap_proc.c" -#include "hostap_80211_rx.c" -#include "hostap_80211_tx.c" - - -struct net_device * hostap_add_interface(struct local_info *local, - int type, int rtnl_locked, - const char *prefix, - const char *name) -{ - struct net_device *dev, *mdev; - struct hostap_interface *iface; - int ret; - - dev = alloc_etherdev(sizeof(struct hostap_interface)); - if (dev == NULL) - return NULL; - - iface = netdev_priv(dev); - iface->dev = dev; - iface->local = local; - iface->type = type; - list_add(&iface->list, &local->hostap_interfaces); - - mdev = local->dev; - memcpy(dev->dev_addr, mdev->dev_addr, ETH_ALEN); - dev->base_addr = mdev->base_addr; - dev->irq = mdev->irq; - dev->mem_start = mdev->mem_start; - dev->mem_end = mdev->mem_end; - - hostap_setup_dev(dev, local, 0); - dev->destructor = free_netdev; - - sprintf(dev->name, "%s%s", prefix, name); - if (!rtnl_locked) - rtnl_lock(); - - ret = 0; - if (strchr(dev->name, '%')) - ret = dev_alloc_name(dev, dev->name); - - SET_NETDEV_DEV(dev, mdev->class_dev.dev); - if (ret >= 0) - ret = register_netdevice(dev); - - if (!rtnl_locked) - rtnl_unlock(); - - if (ret < 0) { - printk(KERN_WARNING "%s: failed to add new netdevice!\n", - dev->name); - free_netdev(dev); - return NULL; - } - - printk(KERN_DEBUG "%s: registered netdevice %s\n", - mdev->name, dev->name); - - return dev; -} - - -void hostap_remove_interface(struct net_device *dev, int rtnl_locked, - int remove_from_list) -{ - struct hostap_interface *iface; - - if (!dev) - return; - - iface = netdev_priv(dev); - - if (remove_from_list) { - list_del(&iface->list); - } - - if (dev == iface->local->ddev) - iface->local->ddev = NULL; - else if (dev == iface->local->apdev) - iface->local->apdev = NULL; - else if (dev == iface->local->stadev) - iface->local->stadev = NULL; - - if (rtnl_locked) - unregister_netdevice(dev); - else - unregister_netdev(dev); - - /* dev->destructor = free_netdev() will free the device data, including - * private data, when removing the device */ -} - - -static inline int prism2_wds_special_addr(u8 *addr) -{ - if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5]) - return 0; - - return 1; -} - - -static int prism2_wds_add(local_info_t *local, u8 *remote_addr, - int rtnl_locked) -{ - struct net_device *dev; - struct list_head *ptr; - struct hostap_interface *iface, *empty, *match; - - empty = match = NULL; - read_lock_bh(&local->iface_lock); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type != HOSTAP_INTERFACE_WDS) - continue; - - if (prism2_wds_special_addr(iface->u.wds.remote_addr)) - empty = iface; - else if (memcmp(iface->u.wds.remote_addr, remote_addr, - ETH_ALEN) == 0) { - match = iface; - break; - } - } - if (!match && empty && !prism2_wds_special_addr(remote_addr)) { - /* take pre-allocated entry into use */ - memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN); - read_unlock_bh(&local->iface_lock); - printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", - local->dev->name, empty->dev->name); - return 0; - } - read_unlock_bh(&local->iface_lock); - - if (!prism2_wds_special_addr(remote_addr)) { - if (match) - return -EEXIST; - hostap_add_sta(local->ap, remote_addr); - } - - if (local->wds_connections >= local->wds_max_connections) - return -ENOBUFS; - - /* verify that there is room for wds# postfix in the interface name */ - if (strlen(local->dev->name) > IFNAMSIZ - 5) { - printk(KERN_DEBUG "'%s' too long base device name\n", - local->dev->name); - return -EINVAL; - } - - dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked, - local->ddev->name, "wds%d"); - if (dev == NULL) - return -ENOMEM; - - iface = netdev_priv(dev); - memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN); - - local->wds_connections++; - - return 0; -} - - -static int prism2_wds_del(local_info_t *local, u8 *remote_addr, - int rtnl_locked, int do_not_remove) -{ - unsigned long flags; - struct list_head *ptr; - struct hostap_interface *iface, *selected = NULL; - - write_lock_irqsave(&local->iface_lock, flags); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - if (iface->type != HOSTAP_INTERFACE_WDS) - continue; - - if (memcmp(iface->u.wds.remote_addr, remote_addr, - ETH_ALEN) == 0) { - selected = iface; - break; - } - } - if (selected && !do_not_remove) - list_del(&selected->list); - write_unlock_irqrestore(&local->iface_lock, flags); - - if (selected) { - if (do_not_remove) - memset(selected->u.wds.remote_addr, 0, ETH_ALEN); - else { - hostap_remove_interface(selected->dev, rtnl_locked, 0); - local->wds_connections--; - } - } - - return selected ? 0 : -ENODEV; -} - - -u16 hostap_tx_callback_register(local_info_t *local, - void (*func)(struct sk_buff *, int ok, void *), - void *data) -{ - unsigned long flags; - struct hostap_tx_callback_info *entry; - - entry = (struct hostap_tx_callback_info *) kmalloc(sizeof(*entry), - GFP_ATOMIC); - if (entry == NULL) - return 0; - - entry->func = func; - entry->data = data; - - spin_lock_irqsave(&local->lock, flags); - entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1; - entry->next = local->tx_callback; - local->tx_callback = entry; - spin_unlock_irqrestore(&local->lock, flags); - - return entry->idx; -} - - -int hostap_tx_callback_unregister(local_info_t *local, u16 idx) -{ - unsigned long flags; - struct hostap_tx_callback_info *cb, *prev = NULL; - - spin_lock_irqsave(&local->lock, flags); - cb = local->tx_callback; - while (cb != NULL && cb->idx != idx) { - prev = cb; - cb = cb->next; - } - if (cb) { - if (prev == NULL) - local->tx_callback = cb->next; - else - prev->next = cb->next; - kfree(cb); - } - spin_unlock_irqrestore(&local->lock, flags); - - return cb ? 0 : -1; -} - - -/* val is in host byte order */ -int hostap_set_word(struct net_device *dev, int rid, u16 val) -{ - struct hostap_interface *iface; - u16 tmp = cpu_to_le16(val); - iface = netdev_priv(dev); - return iface->local->func->set_rid(dev, rid, &tmp, 2); -} - - -int hostap_set_string(struct net_device *dev, int rid, const char *val) -{ - struct hostap_interface *iface; - char buf[MAX_SSID_LEN + 2]; - int len; - - iface = netdev_priv(dev); - len = strlen(val); - if (len > MAX_SSID_LEN) - return -1; - memset(buf, 0, sizeof(buf)); - buf[0] = len; /* little endian 16 bit word */ - memcpy(buf + 2, val, len); - - return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2); -} - - -u16 hostap_get_porttype(local_info_t *local) -{ - if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc) - return HFA384X_PORTTYPE_PSEUDO_IBSS; - if (local->iw_mode == IW_MODE_ADHOC) - return HFA384X_PORTTYPE_IBSS; - if (local->iw_mode == IW_MODE_INFRA) - return HFA384X_PORTTYPE_BSS; - if (local->iw_mode == IW_MODE_REPEAT) - return HFA384X_PORTTYPE_WDS; - if (local->iw_mode == IW_MODE_MONITOR) - return HFA384X_PORTTYPE_PSEUDO_IBSS; - return HFA384X_PORTTYPE_HOSTAP; -} - - -int hostap_set_encryption(local_info_t *local) -{ - u16 val, old_val; - int i, keylen, len, idx; - char keybuf[WEP_KEY_LEN + 1]; - enum { NONE, WEP, OTHER } encrypt_type; - - idx = local->tx_keyidx; - if (local->crypt[idx] == NULL || local->crypt[idx]->ops == NULL) - encrypt_type = NONE; - else if (strcmp(local->crypt[idx]->ops->name, "WEP") == 0) - encrypt_type = WEP; - else - encrypt_type = OTHER; - - if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, - 1) < 0) { - printk(KERN_DEBUG "Could not read current WEP flags.\n"); - goto fail; - } - le16_to_cpus(&val); - old_val = val; - - if (encrypt_type != NONE || local->privacy_invoked) - val |= HFA384X_WEPFLAGS_PRIVACYINVOKED; - else - val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED; - - if (local->open_wep || encrypt_type == NONE || - ((local->ieee_802_1x || local->wpa) && local->host_decrypt)) - val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; - else - val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; - - if ((encrypt_type != NONE || local->privacy_invoked) && - (encrypt_type == OTHER || local->host_encrypt)) - val |= HFA384X_WEPFLAGS_HOSTENCRYPT; - else - val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT; - if ((encrypt_type != NONE || local->privacy_invoked) && - (encrypt_type == OTHER || local->host_decrypt)) - val |= HFA384X_WEPFLAGS_HOSTDECRYPT; - else - val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT; - - if (val != old_val && - hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) { - printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", - val); - goto fail; - } - - if (encrypt_type != WEP) - return 0; - - /* 104-bit support seems to require that all the keys are set to the - * same keylen */ - keylen = 6; /* first 5 octets */ - len = local->crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), - NULL, local->crypt[idx]->priv); - if (idx >= 0 && idx < WEP_KEYS && len > 5) - keylen = WEP_KEY_LEN + 1; /* first 13 octets */ - - for (i = 0; i < WEP_KEYS; i++) { - memset(keybuf, 0, sizeof(keybuf)); - if (local->crypt[i]) { - (void) local->crypt[i]->ops->get_key( - keybuf, sizeof(keybuf), - NULL, local->crypt[i]->priv); - } - if (local->func->set_rid(local->dev, - HFA384X_RID_CNFDEFAULTKEY0 + i, - keybuf, keylen)) { - printk(KERN_DEBUG "Could not set key %d (len=%d)\n", - i, keylen); - goto fail; - } - } - if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) { - printk(KERN_DEBUG "Could not set default keyid %d\n", idx); - goto fail; - } - - return 0; - - fail: - printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); - return -1; -} - - -int hostap_set_antsel(local_info_t *local) -{ - u16 val; - int ret = 0; - - if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH && - local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, - HFA386X_CR_TX_CONFIGURE, - NULL, &val) == 0) { - val &= ~(BIT(2) | BIT(1)); - switch (local->antsel_tx) { - case HOSTAP_ANTSEL_DIVERSITY: - val |= BIT(1); - break; - case HOSTAP_ANTSEL_LOW: - break; - case HOSTAP_ANTSEL_HIGH: - val |= BIT(2); - break; - } - - if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_TX_CONFIGURE, &val, NULL)) { - printk(KERN_INFO "%s: setting TX AntSel failed\n", - local->dev->name); - ret = -1; - } - } - - if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH && - local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, - HFA386X_CR_RX_CONFIGURE, - NULL, &val) == 0) { - val &= ~(BIT(1) | BIT(0)); - switch (local->antsel_rx) { - case HOSTAP_ANTSEL_DIVERSITY: - break; - case HOSTAP_ANTSEL_LOW: - val |= BIT(0); - break; - case HOSTAP_ANTSEL_HIGH: - val |= BIT(0) | BIT(1); - break; - } - - if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, - HFA386X_CR_RX_CONFIGURE, &val, NULL)) { - printk(KERN_INFO "%s: setting RX AntSel failed\n", - local->dev->name); - ret = -1; - } - } - - return ret; -} - - -int hostap_set_roaming(local_info_t *local) -{ - u16 val; - - switch (local->host_roaming) { - case 1: - val = HFA384X_ROAMING_HOST; - break; - case 2: - val = HFA384X_ROAMING_DISABLED; - break; - case 0: - default: - val = HFA384X_ROAMING_FIRMWARE; - break; - } - - return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val); -} - - -int hostap_set_auth_algs(local_info_t *local) -{ - int val = local->auth_algs; - /* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication - * set to include both Open and Shared Key flags. It tries to use - * Shared Key authentication in that case even if WEP keys are not - * configured.. STA f/w v0.7.6 is able to handle such configuration, - * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */ - if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) && - val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY) - val = PRISM2_AUTH_OPEN; - - if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) { - printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " - "failed\n", local->dev->name, local->auth_algs); - return -EINVAL; - } - - return 0; -} - - -void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx) -{ - u16 status, fc; - - status = __le16_to_cpu(rx->status); - - printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " - "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; " - "jiffies=%ld\n", - name, status, (status >> 8) & 0x07, status >> 13, status & 1, - rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies); - - fc = __le16_to_cpu(rx->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " - "data_len=%d%s%s\n", - fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, - __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl), - __le16_to_cpu(rx->data_len), - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" - MACSTR "\n", - MAC2STR(rx->addr1), MAC2STR(rx->addr2), MAC2STR(rx->addr3), - MAC2STR(rx->addr4)); - - printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", - MAC2STR(rx->dst_addr), MAC2STR(rx->src_addr), - __be16_to_cpu(rx->len)); -} - - -void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) -{ - u16 fc; - - printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " - "tx_control=0x%04x; jiffies=%ld\n", - name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate, - __le16_to_cpu(tx->tx_control), jiffies); - - fc = __le16_to_cpu(tx->frame_control); - printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " - "data_len=%d%s%s\n", - fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, - __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl), - __le16_to_cpu(tx->data_len), - fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", - fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); - - printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" - MACSTR "\n", - MAC2STR(tx->addr1), MAC2STR(tx->addr2), MAC2STR(tx->addr3), - MAC2STR(tx->addr4)); - - printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", - MAC2STR(tx->dst_addr), MAC2STR(tx->src_addr), - __be16_to_cpu(tx->len)); -} - - -int hostap_80211_header_parse(struct sk_buff *skb, unsigned char *haddr) -{ - memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); /* addr2 */ - return ETH_ALEN; -} - - -int hostap_80211_prism_header_parse(struct sk_buff *skb, unsigned char *haddr) -{ - if (*(u32 *)skb->mac.raw == LWNG_CAP_DID_BASE) { - memcpy(haddr, skb->mac.raw + - sizeof(struct linux_wlan_ng_prism_hdr) + 10, - ETH_ALEN); /* addr2 */ - } else { /* (*(u32 *)skb->mac.raw == htonl(LWNG_CAPHDR_VERSION)) */ - memcpy(haddr, skb->mac.raw + - sizeof(struct linux_wlan_ng_cap_hdr) + 10, - ETH_ALEN); /* addr2 */ - } - return ETH_ALEN; -} - - -int hostap_80211_get_hdrlen(u16 fc) -{ - int hdrlen = 24; - - switch (WLAN_FC_GET_TYPE(fc)) { - case IEEE80211_FTYPE_DATA: - if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) - hdrlen = 30; /* Addr4 */ - break; - case IEEE80211_FTYPE_CTL: - switch (WLAN_FC_GET_STYPE(fc)) { - case IEEE80211_STYPE_CTS: - case IEEE80211_STYPE_ACK: - hdrlen = 10; - break; - default: - hdrlen = 16; - break; - } - break; - } - - return hdrlen; -} - - -struct net_device_stats *hostap_get_stats(struct net_device *dev) -{ - struct hostap_interface *iface; - iface = netdev_priv(dev); - return &iface->stats; -} - - -static int prism2_close(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - - PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name); - - iface = netdev_priv(dev); - local = iface->local; - - if (dev == local->ddev) { - prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); - } -#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT - if (!local->hostapd && dev == local->dev && - (!local->func->card_present || local->func->card_present(local)) && - local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER) - hostap_deauth_all_stas(dev, local->ap, 1); -#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ - - if (dev == local->dev) { - local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); - } - - if (netif_running(dev)) { - netif_stop_queue(dev); - netif_device_detach(dev); - } - - flush_scheduled_work(); - - module_put(local->hw_module); - - local->num_dev_open--; - - if (dev != local->dev && local->dev->flags & IFF_UP && - local->master_dev_auto_open && local->num_dev_open == 1) { - /* Close master radio interface automatically if it was also - * opened automatically and we are now closing the last - * remaining non-master device. */ - dev_close(local->dev); - } - - return 0; -} - - -static int prism2_open(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - - PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name); - - iface = netdev_priv(dev); - local = iface->local; - - if (local->no_pri) { - printk(KERN_DEBUG "%s: could not set interface UP - no PRI " - "f/w\n", dev->name); - return 1; - } - - if ((local->func->card_present && !local->func->card_present(local)) || - local->hw_downloading) - return -ENODEV; - - if (!try_module_get(local->hw_module)) - return -ENODEV; - local->num_dev_open++; - - if (!local->dev_enabled && local->func->hw_enable(dev, 1)) { - printk(KERN_WARNING "%s: could not enable MAC port\n", - dev->name); - prism2_close(dev); - return 1; - } - if (!local->dev_enabled) - prism2_callback(local, PRISM2_CALLBACK_ENABLE); - local->dev_enabled = 1; - - if (dev != local->dev && !(local->dev->flags & IFF_UP)) { - /* Master radio interface is needed for all operation, so open - * it automatically when any virtual net_device is opened. */ - local->master_dev_auto_open = 1; - dev_open(local->dev); - } - - netif_device_attach(dev); - netif_start_queue(dev); - - return 0; -} - - -static int prism2_set_mac_address(struct net_device *dev, void *p) -{ - struct hostap_interface *iface; - local_info_t *local; - struct list_head *ptr; - struct sockaddr *addr = p; - - iface = netdev_priv(dev); - local = iface->local; - - if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data, - ETH_ALEN) < 0 || local->func->reset_port(dev)) - return -EINVAL; - - read_lock_bh(&local->iface_lock); - list_for_each(ptr, &local->hostap_interfaces) { - iface = list_entry(ptr, struct hostap_interface, list); - memcpy(iface->dev->dev_addr, addr->sa_data, ETH_ALEN); - } - memcpy(local->dev->dev_addr, addr->sa_data, ETH_ALEN); - read_unlock_bh(&local->iface_lock); - - return 0; -} - - -/* TODO: to be further implemented as soon as Prism2 fully supports - * GroupAddresses and correct documentation is available */ -void hostap_set_multicast_list_queue(void *data) -{ - struct net_device *dev = (struct net_device *) data; - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, - local->is_promisc)) { - printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", - dev->name, local->is_promisc ? "en" : "dis"); - } -} - - -static void hostap_set_multicast_list(struct net_device *dev) -{ -#if 0 - /* FIX: promiscuous mode seems to be causing a lot of problems with - * some station firmware versions (FCSErr frames, invalid MACPort, etc. - * corrupted incoming frames). This code is now commented out while the - * problems are investigated. */ - struct hostap_interface *iface; - local_info_t *local; - - iface = netdev_priv(dev); - local = iface->local; - if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) { - local->is_promisc = 1; - } else { - local->is_promisc = 0; - } - - schedule_work(&local->set_multicast_list_queue); -#endif -} - - -static int prism2_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU) - return -EINVAL; - - dev->mtu = new_mtu; - return 0; -} - - -static void prism2_tx_timeout(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - struct hfa384x_regs regs; - - iface = netdev_priv(dev); - local = iface->local; - - printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); - netif_stop_queue(local->dev); - - local->func->read_regs(dev, ®s); - printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " - "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n", - dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1, - regs.swsupport0); - - local->func->schedule_reset(local); -} - - -void hostap_setup_dev(struct net_device *dev, local_info_t *local, - int main_dev) -{ - struct hostap_interface *iface; - - iface = netdev_priv(dev); - ether_setup(dev); - - /* kernel callbacks */ - dev->get_stats = hostap_get_stats; - if (iface) { - /* Currently, we point to the proper spy_data only on - * the main_dev. This could be fixed. Jean II */ - iface->wireless_data.spy_data = &iface->spy_data; - dev->wireless_data = &iface->wireless_data; - } - dev->wireless_handlers = - (struct iw_handler_def *) &hostap_iw_handler_def; - dev->do_ioctl = hostap_ioctl; - dev->open = prism2_open; - dev->stop = prism2_close; - dev->hard_start_xmit = hostap_data_start_xmit; - dev->set_mac_address = prism2_set_mac_address; - dev->set_multicast_list = hostap_set_multicast_list; - dev->change_mtu = prism2_change_mtu; - dev->tx_timeout = prism2_tx_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - - dev->mtu = local->mtu; - if (!main_dev) { - /* use main radio device queue */ - dev->tx_queue_len = 0; - } - - SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops); - - netif_stop_queue(dev); -} - - -static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - if (local->apdev) - return -EEXIST; - - printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); - - local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP, - rtnl_locked, local->ddev->name, - "ap"); - if (local->apdev == NULL) - return -ENOMEM; - - local->apdev->hard_start_xmit = hostap_mgmt_start_xmit; - local->apdev->type = ARPHRD_IEEE80211; - local->apdev->hard_header_parse = hostap_80211_header_parse; - - return 0; -} - - -static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); - - hostap_remove_interface(local->apdev, rtnl_locked, 1); - local->apdev = NULL; - - return 0; -} - - -static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - if (local->stadev) - return -EEXIST; - - printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); - - local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA, - rtnl_locked, local->ddev->name, - "sta"); - if (local->stadev == NULL) - return -ENOMEM; - - return 0; -} - - -static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked) -{ - struct net_device *dev = local->dev; - - printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); - - hostap_remove_interface(local->stadev, rtnl_locked, 1); - local->stadev = NULL; - - return 0; -} - - -int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked) -{ - int ret; - - if (val < 0 || val > 1) - return -EINVAL; - - if (local->hostapd == val) - return 0; - - if (val) { - ret = hostap_enable_hostapd(local, rtnl_locked); - if (ret == 0) - local->hostapd = 1; - } else { - local->hostapd = 0; - ret = hostap_disable_hostapd(local, rtnl_locked); - if (ret != 0) - local->hostapd = 1; - } - - return ret; -} - - -int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked) -{ - int ret; - - if (val < 0 || val > 1) - return -EINVAL; - - if (local->hostapd_sta == val) - return 0; - - if (val) { - ret = hostap_enable_hostapd_sta(local, rtnl_locked); - if (ret == 0) - local->hostapd_sta = 1; - } else { - local->hostapd_sta = 0; - ret = hostap_disable_hostapd_sta(local, rtnl_locked); - if (ret != 0) - local->hostapd_sta = 1; - } - - - return ret; -} - - -int prism2_update_comms_qual(struct net_device *dev) -{ - struct hostap_interface *iface; - local_info_t *local; - int ret = 0; - struct hfa384x_comms_quality sq; - - iface = netdev_priv(dev); - local = iface->local; - if (!local->sta_fw_ver) - ret = -1; - else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { - if (local->func->get_rid(local->dev, - HFA384X_RID_DBMCOMMSQUALITY, - &sq, sizeof(sq), 1) >= 0) { - local->comms_qual = (s16) le16_to_cpu(sq.comm_qual); - local->avg_signal = (s16) le16_to_cpu(sq.signal_level); - local->avg_noise = (s16) le16_to_cpu(sq.noise_level); - local->last_comms_qual_update = jiffies; - } else - ret = -1; - } else { - if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY, - &sq, sizeof(sq), 1) >= 0) { - local->comms_qual = le16_to_cpu(sq.comm_qual); - local->avg_signal = HFA384X_LEVEL_TO_dBm( - le16_to_cpu(sq.signal_level)); - local->avg_noise = HFA384X_LEVEL_TO_dBm( - le16_to_cpu(sq.noise_level)); - local->last_comms_qual_update = jiffies; - } else - ret = -1; - } - - return ret; -} - - -int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, - u8 *body, size_t bodylen) -{ - struct sk_buff *skb; - struct hostap_ieee80211_mgmt *mgmt; - struct hostap_skb_tx_data *meta; - struct net_device *dev = local->dev; - - skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen); - if (skb == NULL) - return -ENOMEM; - - mgmt = (struct hostap_ieee80211_mgmt *) - skb_put(skb, IEEE80211_MGMT_HDR_LEN); - memset(mgmt, 0, IEEE80211_MGMT_HDR_LEN); - mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); - memcpy(mgmt->da, dst, ETH_ALEN); - memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); - memcpy(mgmt->bssid, dst, ETH_ALEN); - if (body) - memcpy(skb_put(skb, bodylen), body, bodylen); - - meta = (struct hostap_skb_tx_data *) skb->cb; - memset(meta, 0, sizeof(*meta)); - meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; - meta->iface = netdev_priv(dev); - - skb->dev = dev; - skb->mac.raw = skb->nh.raw = skb->data; - dev_queue_xmit(skb); - - return 0; -} - - -int prism2_sta_deauth(local_info_t *local, u16 reason) -{ - union iwreq_data wrqu; - int ret; - - if (local->iw_mode != IW_MODE_INFRA || - memcmp(local->bssid, "\x00\x00\x00\x00\x00\x00", ETH_ALEN) == 0 || - memcmp(local->bssid, "\x44\x44\x44\x44\x44\x44", ETH_ALEN) == 0) - return 0; - - reason = cpu_to_le16(reason); - ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH, - (u8 *) &reason, 2); - memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); - wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); - return ret; -} - - -struct proc_dir_entry *hostap_proc; - -static int __init hostap_init(void) -{ - if (proc_net != NULL) { - hostap_proc = proc_mkdir("hostap", proc_net); - if (!hostap_proc) - printk(KERN_WARNING "Failed to mkdir " - "/proc/net/hostap\n"); - } else - hostap_proc = NULL; - - return 0; -} - - -static void __exit hostap_exit(void) -{ - if (hostap_proc != NULL) { - hostap_proc = NULL; - remove_proc_entry("hostap", proc_net); - } -} - - -EXPORT_SYMBOL(hostap_set_word); -EXPORT_SYMBOL(hostap_set_string); -EXPORT_SYMBOL(hostap_get_porttype); -EXPORT_SYMBOL(hostap_set_encryption); -EXPORT_SYMBOL(hostap_set_antsel); -EXPORT_SYMBOL(hostap_set_roaming); -EXPORT_SYMBOL(hostap_set_auth_algs); -EXPORT_SYMBOL(hostap_dump_rx_header); -EXPORT_SYMBOL(hostap_dump_tx_header); -EXPORT_SYMBOL(hostap_80211_header_parse); -EXPORT_SYMBOL(hostap_80211_prism_header_parse); -EXPORT_SYMBOL(hostap_80211_get_hdrlen); -EXPORT_SYMBOL(hostap_get_stats); -EXPORT_SYMBOL(hostap_setup_dev); -EXPORT_SYMBOL(hostap_proc); -EXPORT_SYMBOL(hostap_set_multicast_list_queue); -EXPORT_SYMBOL(hostap_set_hostapd); -EXPORT_SYMBOL(hostap_set_hostapd_sta); -EXPORT_SYMBOL(hostap_add_interface); -EXPORT_SYMBOL(hostap_remove_interface); -EXPORT_SYMBOL(prism2_update_comms_qual); - -module_init(hostap_init); -module_exit(hostap_exit); diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c new file mode 100644 index 00000000000..3d2ea61033b --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -0,0 +1,1191 @@ +/* + * Host AP (software wireless LAN access point) driver for + * Intersil Prism2/2.5/3 - hostap.o module, common routines + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2005, Jouni Malinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. See README and COPYING for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hostap_wlan.h" +#include "hostap_80211.h" +#include "hostap_ap.h" +#include "hostap.h" + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Host AP common routines"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + +#define TX_TIMEOUT (2 * HZ) + +#define PRISM2_MAX_FRAME_SIZE 2304 +#define PRISM2_MIN_MTU 256 +/* FIX: */ +#define PRISM2_MAX_MTU (PRISM2_MAX_FRAME_SIZE - (6 /* LLC */ + 8 /* WEP */)) + + +/* hostap.c */ +static int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked); +static int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove); + +/* hostap_ap.c */ +static int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[], + struct iw_quality qual[], int buf_size, + int aplist); +static int prism2_ap_translate_scan(struct net_device *dev, char *buffer); +static int prism2_hostapd(struct ap_data *ap, + struct prism2_hostapd_param *param); +static void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent, + struct ieee80211_crypt_data ***crypt); +static void ap_control_kickall(struct ap_data *ap); +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT +static int ap_control_add_mac(struct mac_restrictions *mac_restrictions, + u8 *mac); +static int ap_control_del_mac(struct mac_restrictions *mac_restrictions, + u8 *mac); +static void ap_control_flush_macs(struct mac_restrictions *mac_restrictions); +static int ap_control_kick_mac(struct ap_data *ap, struct net_device *dev, + u8 *mac); +#endif /* !PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + +static const long freq_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442, + 2447, 2452, 2457, 2462, 2467, 2472, 2484 }; +#define FREQ_COUNT (sizeof(freq_list) / sizeof(freq_list[0])) + + +/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ +/* Ethernet-II snap header (RFC1042 for most EtherTypes) */ +static unsigned char rfc1042_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; +/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ +static unsigned char bridge_tunnel_header[] = +{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; +/* No encapsulation header if EtherType < 0x600 (=length) */ + + +/* FIX: these could be compiled separately and linked together to hostap.o */ +#include "hostap_ap.c" +#include "hostap_info.c" +#include "hostap_ioctl.c" +#include "hostap_proc.c" +#include "hostap_80211_rx.c" +#include "hostap_80211_tx.c" + + +struct net_device * hostap_add_interface(struct local_info *local, + int type, int rtnl_locked, + const char *prefix, + const char *name) +{ + struct net_device *dev, *mdev; + struct hostap_interface *iface; + int ret; + + dev = alloc_etherdev(sizeof(struct hostap_interface)); + if (dev == NULL) + return NULL; + + iface = netdev_priv(dev); + iface->dev = dev; + iface->local = local; + iface->type = type; + list_add(&iface->list, &local->hostap_interfaces); + + mdev = local->dev; + memcpy(dev->dev_addr, mdev->dev_addr, ETH_ALEN); + dev->base_addr = mdev->base_addr; + dev->irq = mdev->irq; + dev->mem_start = mdev->mem_start; + dev->mem_end = mdev->mem_end; + + hostap_setup_dev(dev, local, 0); + dev->destructor = free_netdev; + + sprintf(dev->name, "%s%s", prefix, name); + if (!rtnl_locked) + rtnl_lock(); + + ret = 0; + if (strchr(dev->name, '%')) + ret = dev_alloc_name(dev, dev->name); + + SET_NETDEV_DEV(dev, mdev->class_dev.dev); + if (ret >= 0) + ret = register_netdevice(dev); + + if (!rtnl_locked) + rtnl_unlock(); + + if (ret < 0) { + printk(KERN_WARNING "%s: failed to add new netdevice!\n", + dev->name); + free_netdev(dev); + return NULL; + } + + printk(KERN_DEBUG "%s: registered netdevice %s\n", + mdev->name, dev->name); + + return dev; +} + + +void hostap_remove_interface(struct net_device *dev, int rtnl_locked, + int remove_from_list) +{ + struct hostap_interface *iface; + + if (!dev) + return; + + iface = netdev_priv(dev); + + if (remove_from_list) { + list_del(&iface->list); + } + + if (dev == iface->local->ddev) + iface->local->ddev = NULL; + else if (dev == iface->local->apdev) + iface->local->apdev = NULL; + else if (dev == iface->local->stadev) + iface->local->stadev = NULL; + + if (rtnl_locked) + unregister_netdevice(dev); + else + unregister_netdev(dev); + + /* dev->destructor = free_netdev() will free the device data, including + * private data, when removing the device */ +} + + +static inline int prism2_wds_special_addr(u8 *addr) +{ + if (addr[0] || addr[1] || addr[2] || addr[3] || addr[4] || addr[5]) + return 0; + + return 1; +} + + +static int prism2_wds_add(local_info_t *local, u8 *remote_addr, + int rtnl_locked) +{ + struct net_device *dev; + struct list_head *ptr; + struct hostap_interface *iface, *empty, *match; + + empty = match = NULL; + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (prism2_wds_special_addr(iface->u.wds.remote_addr)) + empty = iface; + else if (memcmp(iface->u.wds.remote_addr, remote_addr, + ETH_ALEN) == 0) { + match = iface; + break; + } + } + if (!match && empty && !prism2_wds_special_addr(remote_addr)) { + /* take pre-allocated entry into use */ + memcpy(empty->u.wds.remote_addr, remote_addr, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + printk(KERN_DEBUG "%s: using pre-allocated WDS netdevice %s\n", + local->dev->name, empty->dev->name); + return 0; + } + read_unlock_bh(&local->iface_lock); + + if (!prism2_wds_special_addr(remote_addr)) { + if (match) + return -EEXIST; + hostap_add_sta(local->ap, remote_addr); + } + + if (local->wds_connections >= local->wds_max_connections) + return -ENOBUFS; + + /* verify that there is room for wds# postfix in the interface name */ + if (strlen(local->dev->name) > IFNAMSIZ - 5) { + printk(KERN_DEBUG "'%s' too long base device name\n", + local->dev->name); + return -EINVAL; + } + + dev = hostap_add_interface(local, HOSTAP_INTERFACE_WDS, rtnl_locked, + local->ddev->name, "wds%d"); + if (dev == NULL) + return -ENOMEM; + + iface = netdev_priv(dev); + memcpy(iface->u.wds.remote_addr, remote_addr, ETH_ALEN); + + local->wds_connections++; + + return 0; +} + + +static int prism2_wds_del(local_info_t *local, u8 *remote_addr, + int rtnl_locked, int do_not_remove) +{ + unsigned long flags; + struct list_head *ptr; + struct hostap_interface *iface, *selected = NULL; + + write_lock_irqsave(&local->iface_lock, flags); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + if (iface->type != HOSTAP_INTERFACE_WDS) + continue; + + if (memcmp(iface->u.wds.remote_addr, remote_addr, + ETH_ALEN) == 0) { + selected = iface; + break; + } + } + if (selected && !do_not_remove) + list_del(&selected->list); + write_unlock_irqrestore(&local->iface_lock, flags); + + if (selected) { + if (do_not_remove) + memset(selected->u.wds.remote_addr, 0, ETH_ALEN); + else { + hostap_remove_interface(selected->dev, rtnl_locked, 0); + local->wds_connections--; + } + } + + return selected ? 0 : -ENODEV; +} + + +u16 hostap_tx_callback_register(local_info_t *local, + void (*func)(struct sk_buff *, int ok, void *), + void *data) +{ + unsigned long flags; + struct hostap_tx_callback_info *entry; + + entry = (struct hostap_tx_callback_info *) kmalloc(sizeof(*entry), + GFP_ATOMIC); + if (entry == NULL) + return 0; + + entry->func = func; + entry->data = data; + + spin_lock_irqsave(&local->lock, flags); + entry->idx = local->tx_callback ? local->tx_callback->idx + 1 : 1; + entry->next = local->tx_callback; + local->tx_callback = entry; + spin_unlock_irqrestore(&local->lock, flags); + + return entry->idx; +} + + +int hostap_tx_callback_unregister(local_info_t *local, u16 idx) +{ + unsigned long flags; + struct hostap_tx_callback_info *cb, *prev = NULL; + + spin_lock_irqsave(&local->lock, flags); + cb = local->tx_callback; + while (cb != NULL && cb->idx != idx) { + prev = cb; + cb = cb->next; + } + if (cb) { + if (prev == NULL) + local->tx_callback = cb->next; + else + prev->next = cb->next; + kfree(cb); + } + spin_unlock_irqrestore(&local->lock, flags); + + return cb ? 0 : -1; +} + + +/* val is in host byte order */ +int hostap_set_word(struct net_device *dev, int rid, u16 val) +{ + struct hostap_interface *iface; + u16 tmp = cpu_to_le16(val); + iface = netdev_priv(dev); + return iface->local->func->set_rid(dev, rid, &tmp, 2); +} + + +int hostap_set_string(struct net_device *dev, int rid, const char *val) +{ + struct hostap_interface *iface; + char buf[MAX_SSID_LEN + 2]; + int len; + + iface = netdev_priv(dev); + len = strlen(val); + if (len > MAX_SSID_LEN) + return -1; + memset(buf, 0, sizeof(buf)); + buf[0] = len; /* little endian 16 bit word */ + memcpy(buf + 2, val, len); + + return iface->local->func->set_rid(dev, rid, &buf, MAX_SSID_LEN + 2); +} + + +u16 hostap_get_porttype(local_info_t *local) +{ + if (local->iw_mode == IW_MODE_ADHOC && local->pseudo_adhoc) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + if (local->iw_mode == IW_MODE_ADHOC) + return HFA384X_PORTTYPE_IBSS; + if (local->iw_mode == IW_MODE_INFRA) + return HFA384X_PORTTYPE_BSS; + if (local->iw_mode == IW_MODE_REPEAT) + return HFA384X_PORTTYPE_WDS; + if (local->iw_mode == IW_MODE_MONITOR) + return HFA384X_PORTTYPE_PSEUDO_IBSS; + return HFA384X_PORTTYPE_HOSTAP; +} + + +int hostap_set_encryption(local_info_t *local) +{ + u16 val, old_val; + int i, keylen, len, idx; + char keybuf[WEP_KEY_LEN + 1]; + enum { NONE, WEP, OTHER } encrypt_type; + + idx = local->tx_keyidx; + if (local->crypt[idx] == NULL || local->crypt[idx]->ops == NULL) + encrypt_type = NONE; + else if (strcmp(local->crypt[idx]->ops->name, "WEP") == 0) + encrypt_type = WEP; + else + encrypt_type = OTHER; + + if (local->func->get_rid(local->dev, HFA384X_RID_CNFWEPFLAGS, &val, 2, + 1) < 0) { + printk(KERN_DEBUG "Could not read current WEP flags.\n"); + goto fail; + } + le16_to_cpus(&val); + old_val = val; + + if (encrypt_type != NONE || local->privacy_invoked) + val |= HFA384X_WEPFLAGS_PRIVACYINVOKED; + else + val &= ~HFA384X_WEPFLAGS_PRIVACYINVOKED; + + if (local->open_wep || encrypt_type == NONE || + ((local->ieee_802_1x || local->wpa) && local->host_decrypt)) + val &= ~HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + else + val |= HFA384X_WEPFLAGS_EXCLUDEUNENCRYPTED; + + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_encrypt)) + val |= HFA384X_WEPFLAGS_HOSTENCRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTENCRYPT; + if ((encrypt_type != NONE || local->privacy_invoked) && + (encrypt_type == OTHER || local->host_decrypt)) + val |= HFA384X_WEPFLAGS_HOSTDECRYPT; + else + val &= ~HFA384X_WEPFLAGS_HOSTDECRYPT; + + if (val != old_val && + hostap_set_word(local->dev, HFA384X_RID_CNFWEPFLAGS, val)) { + printk(KERN_DEBUG "Could not write new WEP flags (0x%x)\n", + val); + goto fail; + } + + if (encrypt_type != WEP) + return 0; + + /* 104-bit support seems to require that all the keys are set to the + * same keylen */ + keylen = 6; /* first 5 octets */ + len = local->crypt[idx]->ops->get_key(keybuf, sizeof(keybuf), + NULL, local->crypt[idx]->priv); + if (idx >= 0 && idx < WEP_KEYS && len > 5) + keylen = WEP_KEY_LEN + 1; /* first 13 octets */ + + for (i = 0; i < WEP_KEYS; i++) { + memset(keybuf, 0, sizeof(keybuf)); + if (local->crypt[i]) { + (void) local->crypt[i]->ops->get_key( + keybuf, sizeof(keybuf), + NULL, local->crypt[i]->priv); + } + if (local->func->set_rid(local->dev, + HFA384X_RID_CNFDEFAULTKEY0 + i, + keybuf, keylen)) { + printk(KERN_DEBUG "Could not set key %d (len=%d)\n", + i, keylen); + goto fail; + } + } + if (hostap_set_word(local->dev, HFA384X_RID_CNFWEPDEFAULTKEYID, idx)) { + printk(KERN_DEBUG "Could not set default keyid %d\n", idx); + goto fail; + } + + return 0; + + fail: + printk(KERN_DEBUG "%s: encryption setup failed\n", local->dev->name); + return -1; +} + + +int hostap_set_antsel(local_info_t *local) +{ + u16 val; + int ret = 0; + + if (local->antsel_tx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_TX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(2) | BIT(1)); + switch (local->antsel_tx) { + case HOSTAP_ANTSEL_DIVERSITY: + val |= BIT(1); + break; + case HOSTAP_ANTSEL_LOW: + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(2); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_TX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting TX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + if (local->antsel_rx != HOSTAP_ANTSEL_DO_NOT_TOUCH && + local->func->cmd(local->dev, HFA384X_CMDCODE_READMIF, + HFA386X_CR_RX_CONFIGURE, + NULL, &val) == 0) { + val &= ~(BIT(1) | BIT(0)); + switch (local->antsel_rx) { + case HOSTAP_ANTSEL_DIVERSITY: + break; + case HOSTAP_ANTSEL_LOW: + val |= BIT(0); + break; + case HOSTAP_ANTSEL_HIGH: + val |= BIT(0) | BIT(1); + break; + } + + if (local->func->cmd(local->dev, HFA384X_CMDCODE_WRITEMIF, + HFA386X_CR_RX_CONFIGURE, &val, NULL)) { + printk(KERN_INFO "%s: setting RX AntSel failed\n", + local->dev->name); + ret = -1; + } + } + + return ret; +} + + +int hostap_set_roaming(local_info_t *local) +{ + u16 val; + + switch (local->host_roaming) { + case 1: + val = HFA384X_ROAMING_HOST; + break; + case 2: + val = HFA384X_ROAMING_DISABLED; + break; + case 0: + default: + val = HFA384X_ROAMING_FIRMWARE; + break; + } + + return hostap_set_word(local->dev, HFA384X_RID_CNFROAMINGMODE, val); +} + + +int hostap_set_auth_algs(local_info_t *local) +{ + int val = local->auth_algs; + /* At least STA f/w v0.6.2 seems to have issues with cnfAuthentication + * set to include both Open and Shared Key flags. It tries to use + * Shared Key authentication in that case even if WEP keys are not + * configured.. STA f/w v0.7.6 is able to handle such configuration, + * but it is unknown when this was fixed between 0.6.2 .. 0.7.6. */ + if (local->sta_fw_ver < PRISM2_FW_VER(0,7,0) && + val != PRISM2_AUTH_OPEN && val != PRISM2_AUTH_SHARED_KEY) + val = PRISM2_AUTH_OPEN; + + if (hostap_set_word(local->dev, HFA384X_RID_CNFAUTHENTICATION, val)) { + printk(KERN_INFO "%s: cnfAuthentication setting to 0x%x " + "failed\n", local->dev->name, local->auth_algs); + return -EINVAL; + } + + return 0; +} + + +void hostap_dump_rx_header(const char *name, const struct hfa384x_rx_frame *rx) +{ + u16 status, fc; + + status = __le16_to_cpu(rx->status); + + printk(KERN_DEBUG "%s: RX status=0x%04x (port=%d, type=%d, " + "fcserr=%d) silence=%d signal=%d rate=%d rxflow=%d; " + "jiffies=%ld\n", + name, status, (status >> 8) & 0x07, status >> 13, status & 1, + rx->silence, rx->signal, rx->rate, rx->rxflow, jiffies); + + fc = __le16_to_cpu(rx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + __le16_to_cpu(rx->duration_id), __le16_to_cpu(rx->seq_ctrl), + __le16_to_cpu(rx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" + MACSTR "\n", + MAC2STR(rx->addr1), MAC2STR(rx->addr2), MAC2STR(rx->addr3), + MAC2STR(rx->addr4)); + + printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", + MAC2STR(rx->dst_addr), MAC2STR(rx->src_addr), + __be16_to_cpu(rx->len)); +} + + +void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) +{ + u16 fc; + + printk(KERN_DEBUG "%s: TX status=0x%04x retry_count=%d tx_rate=%d " + "tx_control=0x%04x; jiffies=%ld\n", + name, __le16_to_cpu(tx->status), tx->retry_count, tx->tx_rate, + __le16_to_cpu(tx->tx_control), jiffies); + + fc = __le16_to_cpu(tx->frame_control); + printk(KERN_DEBUG " FC=0x%04x (type=%d:%d) dur=0x%04x seq=0x%04x " + "data_len=%d%s%s\n", + fc, WLAN_FC_GET_TYPE(fc) >> 2, WLAN_FC_GET_STYPE(fc) >> 4, + __le16_to_cpu(tx->duration_id), __le16_to_cpu(tx->seq_ctrl), + __le16_to_cpu(tx->data_len), + fc & IEEE80211_FCTL_TODS ? " [ToDS]" : "", + fc & IEEE80211_FCTL_FROMDS ? " [FromDS]" : ""); + + printk(KERN_DEBUG " A1=" MACSTR " A2=" MACSTR " A3=" MACSTR " A4=" + MACSTR "\n", + MAC2STR(tx->addr1), MAC2STR(tx->addr2), MAC2STR(tx->addr3), + MAC2STR(tx->addr4)); + + printk(KERN_DEBUG " dst=" MACSTR " src=" MACSTR " len=%d\n", + MAC2STR(tx->dst_addr), MAC2STR(tx->src_addr), + __be16_to_cpu(tx->len)); +} + + +int hostap_80211_header_parse(struct sk_buff *skb, unsigned char *haddr) +{ + memcpy(haddr, skb->mac.raw + 10, ETH_ALEN); /* addr2 */ + return ETH_ALEN; +} + + +int hostap_80211_prism_header_parse(struct sk_buff *skb, unsigned char *haddr) +{ + if (*(u32 *)skb->mac.raw == LWNG_CAP_DID_BASE) { + memcpy(haddr, skb->mac.raw + + sizeof(struct linux_wlan_ng_prism_hdr) + 10, + ETH_ALEN); /* addr2 */ + } else { /* (*(u32 *)skb->mac.raw == htonl(LWNG_CAPHDR_VERSION)) */ + memcpy(haddr, skb->mac.raw + + sizeof(struct linux_wlan_ng_cap_hdr) + 10, + ETH_ALEN); /* addr2 */ + } + return ETH_ALEN; +} + + +int hostap_80211_get_hdrlen(u16 fc) +{ + int hdrlen = 24; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_DATA: + if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) + hdrlen = 30; /* Addr4 */ + break; + case IEEE80211_FTYPE_CTL: + switch (WLAN_FC_GET_STYPE(fc)) { + case IEEE80211_STYPE_CTS: + case IEEE80211_STYPE_ACK: + hdrlen = 10; + break; + default: + hdrlen = 16; + break; + } + break; + } + + return hdrlen; +} + + +struct net_device_stats *hostap_get_stats(struct net_device *dev) +{ + struct hostap_interface *iface; + iface = netdev_priv(dev); + return &iface->stats; +} + + +static int prism2_close(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_close\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (dev == local->ddev) { + prism2_sta_deauth(local, WLAN_REASON_DEAUTH_LEAVING); + } +#ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT + if (!local->hostapd && dev == local->dev && + (!local->func->card_present || local->func->card_present(local)) && + local->hw_ready && local->ap && local->iw_mode == IW_MODE_MASTER) + hostap_deauth_all_stas(dev, local->ap, 1); +#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */ + + if (dev == local->dev) { + local->func->hw_shutdown(dev, HOSTAP_HW_ENABLE_CMDCOMPL); + } + + if (netif_running(dev)) { + netif_stop_queue(dev); + netif_device_detach(dev); + } + + flush_scheduled_work(); + + module_put(local->hw_module); + + local->num_dev_open--; + + if (dev != local->dev && local->dev->flags & IFF_UP && + local->master_dev_auto_open && local->num_dev_open == 1) { + /* Close master radio interface automatically if it was also + * opened automatically and we are now closing the last + * remaining non-master device. */ + dev_close(local->dev); + } + + return 0; +} + + +static int prism2_open(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + + PDEBUG(DEBUG_FLOW, "%s: prism2_open\n", dev->name); + + iface = netdev_priv(dev); + local = iface->local; + + if (local->no_pri) { + printk(KERN_DEBUG "%s: could not set interface UP - no PRI " + "f/w\n", dev->name); + return 1; + } + + if ((local->func->card_present && !local->func->card_present(local)) || + local->hw_downloading) + return -ENODEV; + + if (!try_module_get(local->hw_module)) + return -ENODEV; + local->num_dev_open++; + + if (!local->dev_enabled && local->func->hw_enable(dev, 1)) { + printk(KERN_WARNING "%s: could not enable MAC port\n", + dev->name); + prism2_close(dev); + return 1; + } + if (!local->dev_enabled) + prism2_callback(local, PRISM2_CALLBACK_ENABLE); + local->dev_enabled = 1; + + if (dev != local->dev && !(local->dev->flags & IFF_UP)) { + /* Master radio interface is needed for all operation, so open + * it automatically when any virtual net_device is opened. */ + local->master_dev_auto_open = 1; + dev_open(local->dev); + } + + netif_device_attach(dev); + netif_start_queue(dev); + + return 0; +} + + +static int prism2_set_mac_address(struct net_device *dev, void *p) +{ + struct hostap_interface *iface; + local_info_t *local; + struct list_head *ptr; + struct sockaddr *addr = p; + + iface = netdev_priv(dev); + local = iface->local; + + if (local->func->set_rid(dev, HFA384X_RID_CNFOWNMACADDR, addr->sa_data, + ETH_ALEN) < 0 || local->func->reset_port(dev)) + return -EINVAL; + + read_lock_bh(&local->iface_lock); + list_for_each(ptr, &local->hostap_interfaces) { + iface = list_entry(ptr, struct hostap_interface, list); + memcpy(iface->dev->dev_addr, addr->sa_data, ETH_ALEN); + } + memcpy(local->dev->dev_addr, addr->sa_data, ETH_ALEN); + read_unlock_bh(&local->iface_lock); + + return 0; +} + + +/* TODO: to be further implemented as soon as Prism2 fully supports + * GroupAddresses and correct documentation is available */ +void hostap_set_multicast_list_queue(void *data) +{ + struct net_device *dev = (struct net_device *) data; + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, + local->is_promisc)) { + printk(KERN_INFO "%s: %sabling promiscuous mode failed\n", + dev->name, local->is_promisc ? "en" : "dis"); + } +} + + +static void hostap_set_multicast_list(struct net_device *dev) +{ +#if 0 + /* FIX: promiscuous mode seems to be causing a lot of problems with + * some station firmware versions (FCSErr frames, invalid MACPort, etc. + * corrupted incoming frames). This code is now commented out while the + * problems are investigated. */ + struct hostap_interface *iface; + local_info_t *local; + + iface = netdev_priv(dev); + local = iface->local; + if ((dev->flags & IFF_ALLMULTI) || (dev->flags & IFF_PROMISC)) { + local->is_promisc = 1; + } else { + local->is_promisc = 0; + } + + schedule_work(&local->set_multicast_list_queue); +#endif +} + + +static int prism2_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + return 0; +} + + +static void prism2_tx_timeout(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + struct hfa384x_regs regs; + + iface = netdev_priv(dev); + local = iface->local; + + printk(KERN_WARNING "%s Tx timed out! Resetting card\n", dev->name); + netif_stop_queue(local->dev); + + local->func->read_regs(dev, ®s); + printk(KERN_DEBUG "%s: CMD=%04x EVSTAT=%04x " + "OFFSET0=%04x OFFSET1=%04x SWSUPPORT0=%04x\n", + dev->name, regs.cmd, regs.evstat, regs.offset0, regs.offset1, + regs.swsupport0); + + local->func->schedule_reset(local); +} + + +void hostap_setup_dev(struct net_device *dev, local_info_t *local, + int main_dev) +{ + struct hostap_interface *iface; + + iface = netdev_priv(dev); + ether_setup(dev); + + /* kernel callbacks */ + dev->get_stats = hostap_get_stats; + if (iface) { + /* Currently, we point to the proper spy_data only on + * the main_dev. This could be fixed. Jean II */ + iface->wireless_data.spy_data = &iface->spy_data; + dev->wireless_data = &iface->wireless_data; + } + dev->wireless_handlers = + (struct iw_handler_def *) &hostap_iw_handler_def; + dev->do_ioctl = hostap_ioctl; + dev->open = prism2_open; + dev->stop = prism2_close; + dev->hard_start_xmit = hostap_data_start_xmit; + dev->set_mac_address = prism2_set_mac_address; + dev->set_multicast_list = hostap_set_multicast_list; + dev->change_mtu = prism2_change_mtu; + dev->tx_timeout = prism2_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + dev->mtu = local->mtu; + if (!main_dev) { + /* use main radio device queue */ + dev->tx_queue_len = 0; + } + + SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops); + + netif_stop_queue(dev); +} + + +static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->apdev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd mode\n", dev->name); + + local->apdev = hostap_add_interface(local, HOSTAP_INTERFACE_AP, + rtnl_locked, local->ddev->name, + "ap"); + if (local->apdev == NULL) + return -ENOMEM; + + local->apdev->hard_start_xmit = hostap_mgmt_start_xmit; + local->apdev->type = ARPHRD_IEEE80211; + local->apdev->hard_header_parse = hostap_80211_header_parse; + + return 0; +} + + +static int hostap_disable_hostapd(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->apdev, rtnl_locked, 1); + local->apdev = NULL; + + return 0; +} + + +static int hostap_enable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + if (local->stadev) + return -EEXIST; + + printk(KERN_DEBUG "%s: enabling hostapd STA mode\n", dev->name); + + local->stadev = hostap_add_interface(local, HOSTAP_INTERFACE_STA, + rtnl_locked, local->ddev->name, + "sta"); + if (local->stadev == NULL) + return -ENOMEM; + + return 0; +} + + +static int hostap_disable_hostapd_sta(local_info_t *local, int rtnl_locked) +{ + struct net_device *dev = local->dev; + + printk(KERN_DEBUG "%s: disabling hostapd mode\n", dev->name); + + hostap_remove_interface(local->stadev, rtnl_locked, 1); + local->stadev = NULL; + + return 0; +} + + +int hostap_set_hostapd(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd(local, rtnl_locked); + if (ret == 0) + local->hostapd = 1; + } else { + local->hostapd = 0; + ret = hostap_disable_hostapd(local, rtnl_locked); + if (ret != 0) + local->hostapd = 1; + } + + return ret; +} + + +int hostap_set_hostapd_sta(local_info_t *local, int val, int rtnl_locked) +{ + int ret; + + if (val < 0 || val > 1) + return -EINVAL; + + if (local->hostapd_sta == val) + return 0; + + if (val) { + ret = hostap_enable_hostapd_sta(local, rtnl_locked); + if (ret == 0) + local->hostapd_sta = 1; + } else { + local->hostapd_sta = 0; + ret = hostap_disable_hostapd_sta(local, rtnl_locked); + if (ret != 0) + local->hostapd_sta = 1; + } + + + return ret; +} + + +int prism2_update_comms_qual(struct net_device *dev) +{ + struct hostap_interface *iface; + local_info_t *local; + int ret = 0; + struct hfa384x_comms_quality sq; + + iface = netdev_priv(dev); + local = iface->local; + if (!local->sta_fw_ver) + ret = -1; + else if (local->sta_fw_ver >= PRISM2_FW_VER(1,3,1)) { + if (local->func->get_rid(local->dev, + HFA384X_RID_DBMCOMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = (s16) le16_to_cpu(sq.comm_qual); + local->avg_signal = (s16) le16_to_cpu(sq.signal_level); + local->avg_noise = (s16) le16_to_cpu(sq.noise_level); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } else { + if (local->func->get_rid(local->dev, HFA384X_RID_COMMSQUALITY, + &sq, sizeof(sq), 1) >= 0) { + local->comms_qual = le16_to_cpu(sq.comm_qual); + local->avg_signal = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.signal_level)); + local->avg_noise = HFA384X_LEVEL_TO_dBm( + le16_to_cpu(sq.noise_level)); + local->last_comms_qual_update = jiffies; + } else + ret = -1; + } + + return ret; +} + + +int prism2_sta_send_mgmt(local_info_t *local, u8 *dst, u16 stype, + u8 *body, size_t bodylen) +{ + struct sk_buff *skb; + struct hostap_ieee80211_mgmt *mgmt; + struct hostap_skb_tx_data *meta; + struct net_device *dev = local->dev; + + skb = dev_alloc_skb(IEEE80211_MGMT_HDR_LEN + bodylen); + if (skb == NULL) + return -ENOMEM; + + mgmt = (struct hostap_ieee80211_mgmt *) + skb_put(skb, IEEE80211_MGMT_HDR_LEN); + memset(mgmt, 0, IEEE80211_MGMT_HDR_LEN); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype); + memcpy(mgmt->da, dst, ETH_ALEN); + memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); + memcpy(mgmt->bssid, dst, ETH_ALEN); + if (body) + memcpy(skb_put(skb, bodylen), body, bodylen); + + meta = (struct hostap_skb_tx_data *) skb->cb; + memset(meta, 0, sizeof(*meta)); + meta->magic = HOSTAP_SKB_TX_DATA_MAGIC; + meta->iface = netdev_priv(dev); + + skb->dev = dev; + skb->mac.raw = skb->nh.raw = skb->data; + dev_queue_xmit(skb); + + return 0; +} + + +int prism2_sta_deauth(local_info_t *local, u16 reason) +{ + union iwreq_data wrqu; + int ret; + + if (local->iw_mode != IW_MODE_INFRA || + memcmp(local->bssid, "\x00\x00\x00\x00\x00\x00", ETH_ALEN) == 0 || + memcmp(local->bssid, "\x44\x44\x44\x44\x44\x44", ETH_ALEN) == 0) + return 0; + + reason = cpu_to_le16(reason); + ret = prism2_sta_send_mgmt(local, local->bssid, IEEE80211_STYPE_DEAUTH, + (u8 *) &reason, 2); + memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN); + wireless_send_event(local->dev, SIOCGIWAP, &wrqu, NULL); + return ret; +} + + +struct proc_dir_entry *hostap_proc; + +static int __init hostap_init(void) +{ + if (proc_net != NULL) { + hostap_proc = proc_mkdir("hostap", proc_net); + if (!hostap_proc) + printk(KERN_WARNING "Failed to mkdir " + "/proc/net/hostap\n"); + } else + hostap_proc = NULL; + + return 0; +} + + +static void __exit hostap_exit(void) +{ + if (hostap_proc != NULL) { + hostap_proc = NULL; + remove_proc_entry("hostap", proc_net); + } +} + + +EXPORT_SYMBOL(hostap_set_word); +EXPORT_SYMBOL(hostap_set_string); +EXPORT_SYMBOL(hostap_get_porttype); +EXPORT_SYMBOL(hostap_set_encryption); +EXPORT_SYMBOL(hostap_set_antsel); +EXPORT_SYMBOL(hostap_set_roaming); +EXPORT_SYMBOL(hostap_set_auth_algs); +EXPORT_SYMBOL(hostap_dump_rx_header); +EXPORT_SYMBOL(hostap_dump_tx_header); +EXPORT_SYMBOL(hostap_80211_header_parse); +EXPORT_SYMBOL(hostap_80211_prism_header_parse); +EXPORT_SYMBOL(hostap_80211_get_hdrlen); +EXPORT_SYMBOL(hostap_get_stats); +EXPORT_SYMBOL(hostap_setup_dev); +EXPORT_SYMBOL(hostap_proc); +EXPORT_SYMBOL(hostap_set_multicast_list_queue); +EXPORT_SYMBOL(hostap_set_hostapd); +EXPORT_SYMBOL(hostap_set_hostapd_sta); +EXPORT_SYMBOL(hostap_add_interface); +EXPORT_SYMBOL(hostap_remove_interface); +EXPORT_SYMBOL(prism2_update_comms_qual); + +module_init(hostap_init); +module_exit(hostap_exit); -- cgit v1.2.3-70-g09d2 From fed5eccdcf542742786701b2514b5cb7ab282b93 Mon Sep 17 00:00:00 2001 From: Ananda Raju Date: Mon, 14 Nov 2005 15:25:08 -0500 Subject: [PATCH] s2io: UFO support This patch implements the UFO support in S2io driver. This patch uses the UFO interface available in linux-2.6.15 kernel. Signed-off-by: Ananda Raju Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 186 +++++++++++++++++++++++++++++++---------------------- drivers/net/s2io.h | 3 + 2 files changed, 112 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e57df8dfe6b..5303a96b432 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -66,7 +66,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "Version 2.0.9.3" +#define DRV_VERSION "Version 2.0.9.4" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; @@ -412,7 +412,7 @@ static int init_shared_mem(struct s2io_nic *nic) config->tx_cfg[i].fifo_len - 1; mac_control->fifos[i].fifo_no = i; mac_control->fifos[i].nic = nic; - mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 1; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS + 2; for (j = 0; j < page_num; j++) { int k = 0; @@ -459,6 +459,10 @@ static int init_shared_mem(struct s2io_nic *nic) } } + nic->ufo_in_band_v = kmalloc((sizeof(u64) * size), GFP_KERNEL); + if (!nic->ufo_in_band_v) + return -ENOMEM; + /* Allocation and initialization of RXDs in Rings */ size = 0; for (i = 0; i < config->rx_ring_num; i++) { @@ -731,6 +735,8 @@ static void free_shared_mem(struct s2io_nic *nic) mac_control->stats_mem, mac_control->stats_mem_phy); } + if (nic->ufo_in_band_v) + kfree(nic->ufo_in_band_v); } /** @@ -2003,6 +2009,49 @@ static int start_nic(struct s2io_nic *nic) return SUCCESS; } +/** + * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb + */ +static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, int get_off) +{ + nic_t *nic = fifo_data->nic; + struct sk_buff *skb; + TxD_t *txds; + u16 j, frg_cnt; + + txds = txdlp; + if (txds->Host_Control == (u64) nic->ufo_in_band_v) { + pci_unmap_single(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, sizeof(u64), + PCI_DMA_TODEVICE); + txds++; + } + + skb = (struct sk_buff *) ((unsigned long) + txds->Host_Control); + if (!skb) { + memset(txdlp, 0, (sizeof(TxD_t) * fifo_data->max_txds)); + return NULL; + } + pci_unmap_single(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + frg_cnt = skb_shinfo(skb)->nr_frags; + if (frg_cnt) { + txds++; + for (j = 0; j < frg_cnt; j++, txds++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[j]; + if (!txds->Buffer_Pointer) + break; + pci_unmap_page(nic->pdev, (dma_addr_t) + txds->Buffer_Pointer, + frag->size, PCI_DMA_TODEVICE); + } + } + txdlp->Host_Control = 0; + return(skb); +} /** * free_tx_buffers - Free all queued Tx buffers @@ -2020,7 +2069,7 @@ static void free_tx_buffers(struct s2io_nic *nic) int i, j; mac_info_t *mac_control; struct config_param *config; - int cnt = 0, frg_cnt; + int cnt = 0; mac_control = &nic->mac_control; config = &nic->config; @@ -2029,38 +2078,11 @@ static void free_tx_buffers(struct s2io_nic *nic) for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) { txdp = (TxD_t *) mac_control->fifos[i].list_info[j]. list_virt_addr; - skb = - (struct sk_buff *) ((unsigned long) txdp-> - Host_Control); - if (skb == NULL) { - memset(txdp, 0, sizeof(TxD_t) * - config->max_txds); - continue; - } - frg_cnt = skb_shinfo(skb)->nr_frags; - pci_unmap_single(nic->pdev, (dma_addr_t) - txdp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp; - temp = txdp; - txdp++; - for (j = 0; j < frg_cnt; j++, txdp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdp = temp; + skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j); + if (skb) { + dev_kfree_skb(skb); + cnt++; } - dev_kfree_skb(skb); - memset(txdp, 0, sizeof(TxD_t) * config->max_txds); - cnt++; } DBG_PRINT(INTR_DBG, "%s:forcibly freeing %d skbs on FIFO%d\n", @@ -2661,7 +2683,6 @@ static void tx_intr_handler(fifo_info_t *fifo_data) tx_curr_get_info_t get_info, put_info; struct sk_buff *skb; TxD_t *txdlp; - u16 j, frg_cnt; get_info = fifo_data->tx_curr_get_info; put_info = fifo_data->tx_curr_put_info; @@ -2684,8 +2705,7 @@ to loss of link\n"); } } - skb = (struct sk_buff *) ((unsigned long) - txdlp->Host_Control); + skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset); if (skb == NULL) { DBG_PRINT(ERR_DBG, "%s: Null skb ", __FUNCTION__); @@ -2693,34 +2713,6 @@ to loss of link\n"); return; } - frg_cnt = skb_shinfo(skb)->nr_frags; - nic->tx_pkt_count++; - - pci_unmap_single(nic->pdev, (dma_addr_t) - txdlp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp; - temp = txdlp; - txdlp++; - for (j = 0; j < frg_cnt; j++, txdlp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - if (!txdlp->Buffer_Pointer) - break; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdlp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdlp = temp; - } - memset(txdlp, 0, - (sizeof(TxD_t) * fifo_data->max_txds)); - /* Updating the statistics block */ nic->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); @@ -3527,6 +3519,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } + txdp->Control_1 = 0; + txdp->Control_2 = 0; #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; if (mss) { @@ -3534,19 +3528,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_TCP_LSO_MSS(mss); } #endif - - frg_cnt = skb_shinfo(skb)->nr_frags; - frg_len = skb->len - skb->data_len; - - txdp->Buffer_Pointer = pci_map_single - (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); - txdp->Host_Control = (unsigned long) skb; if (skb->ip_summed == CHECKSUM_HW) { txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN | TXD_TX_CKO_UDP_EN); } - + txdp->Control_1 |= TXD_GATHER_CODE_FIRST; + txdp->Control_1 |= TXD_LIST_OWN_XENA; txdp->Control_2 |= config->tx_intr_type; if (sp->vlgrp && vlan_tx_tag_present(skb)) { @@ -3554,10 +3542,40 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); } - txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | - TXD_GATHER_CODE_FIRST); - txdp->Control_1 |= TXD_LIST_OWN_XENA; + frg_len = skb->len - skb->data_len; + if (skb_shinfo(skb)->ufo_size) { + int ufo_size; + + ufo_size = skb_shinfo(skb)->ufo_size; + ufo_size &= ~7; + txdp->Control_1 |= TXD_UFO_EN; + txdp->Control_1 |= TXD_UFO_MSS(ufo_size); + txdp->Control_1 |= TXD_BUFFER0_SIZE(8); +#ifdef __BIG_ENDIAN + sp->ufo_in_band_v[put_off] = + (u64)skb_shinfo(skb)->ip6_frag_id; +#else + sp->ufo_in_band_v[put_off] = + (u64)skb_shinfo(skb)->ip6_frag_id << 32; +#endif + txdp->Host_Control = (unsigned long)sp->ufo_in_band_v; + txdp->Buffer_Pointer = pci_map_single(sp->pdev, + sp->ufo_in_band_v, + sizeof(u64), PCI_DMA_TODEVICE); + txdp++; + txdp->Control_1 = 0; + txdp->Control_2 = 0; + } + + txdp->Buffer_Pointer = pci_map_single + (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); + txdp->Host_Control = (unsigned long) skb; + txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len); + if (skb_shinfo(skb)->ufo_size) + txdp->Control_1 |= TXD_UFO_EN; + + frg_cnt = skb_shinfo(skb)->nr_frags; /* For fragmented SKB. */ for (i = 0; i < frg_cnt; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; @@ -3569,9 +3587,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) (sp->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); txdp->Control_1 |= TXD_BUFFER0_SIZE(frag->size); + if (skb_shinfo(skb)->ufo_size) + txdp->Control_1 |= TXD_UFO_EN; } txdp->Control_1 |= TXD_GATHER_CODE_LAST; + if (skb_shinfo(skb)->ufo_size) + frg_cnt++; /* as Txd0 was used for inband header */ + tx_fifo = mac_control->tx_FIFO_start[queue]; val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); @@ -3583,6 +3606,8 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) if (mss) val64 |= TX_FIFO_SPECIAL_FUNC; #endif + if (skb_shinfo(skb)->ufo_size) + val64 |= TX_FIFO_SPECIAL_FUNC; writeq(val64, &tx_fifo->List_Control); mmiowb(); @@ -5190,6 +5215,8 @@ static struct ethtool_ops netdev_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, #endif + .get_ufo = ethtool_op_get_ufo, + .set_ufo = ethtool_op_set_ufo, .self_test_count = s2io_ethtool_self_test_count, .self_test = s2io_ethtool_test, .get_strings = s2io_ethtool_get_strings, @@ -5941,7 +5968,8 @@ Defaulting to INTA\n"); break; } } - config->max_txds = MAX_SKB_FRAGS + 1; + /* + 2 because one Txd for skb->data and one Txd for UFO */ + config->max_txds = MAX_SKB_FRAGS + 2; /* Rx side parameters. */ if (rx_ring_sz[0] == 0) @@ -6035,6 +6063,10 @@ Defaulting to INTA\n"); #ifdef NETIF_F_TSO dev->features |= NETIF_F_TSO; #endif + if (sp->device_type & XFRAME_II_DEVICE) { + dev->features |= NETIF_F_UFO; + dev->features |= NETIF_F_HW_CSUM; + } dev->tx_timeout = &s2io_tx_watchdog; dev->watchdog_timeo = WATCH_DOG_TIMEOUT; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 419aad7f10e..852a6a899d0 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -393,7 +393,9 @@ typedef struct _TxD { #define TXD_GATHER_CODE_LAST BIT(23) #define TXD_TCP_LSO_EN BIT(30) #define TXD_UDP_COF_EN BIT(31) +#define TXD_UFO_EN BIT(31) | BIT(30) #define TXD_TCP_LSO_MSS(val) vBIT(val,34,14) +#define TXD_UFO_MSS(val) vBIT(val,34,14) #define TXD_BUFFER0_SIZE(val) vBIT(val,48,16) u64 Control_2; @@ -789,6 +791,7 @@ struct s2io_nic { spinlock_t rx_lock; atomic_t isr_cnt; + u64 *ufo_in_band_v; }; #define RESET_ERROR 1; -- cgit v1.2.3-70-g09d2 From 7f7f53168dbee6d6a462acea666fddd18aad4f08 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Fri, 11 Nov 2005 12:38:59 -0600 Subject: [PATCH] Gianfar update and sysfs support This seems to have gotten lost, so I'll resend. Signed-off-by: Andy Fleming * Added sysfs support to gianfar for modifying FIFO and stashing parameters * Updated driver to support 10 Mbit, full duplex operation * Improved comments throughout * Cleaned up and optimized offloading code * Fixed a bug where rx buffers were being improperly mapped and unmapped * (only manifested if cache-coherency was off) * Added support for using the eTSEC exact-match MAC registers * Bumped the version to 1.3 * Added support for distinguishing between reduced 100 and 10 Mbit modes * Modified default coalescing values to lower latency * Added documentation Signed-off-by: Jeff Garzik --- Documentation/networking/gianfar.txt | 72 ++++++++ drivers/net/Makefile | 5 +- drivers/net/gianfar.c | 231 +++++++++++++++++--------- drivers/net/gianfar.h | 69 ++++---- drivers/net/gianfar_ethtool.c | 2 +- drivers/net/gianfar_mii.h | 1 + drivers/net/gianfar_sysfs.c | 311 +++++++++++++++++++++++++++++++++++ 7 files changed, 579 insertions(+), 112 deletions(-) create mode 100644 Documentation/networking/gianfar.txt create mode 100644 drivers/net/gianfar_sysfs.c (limited to 'drivers') diff --git a/Documentation/networking/gianfar.txt b/Documentation/networking/gianfar.txt new file mode 100644 index 00000000000..ad474ea07d0 --- /dev/null +++ b/Documentation/networking/gianfar.txt @@ -0,0 +1,72 @@ +The Gianfar Ethernet Driver +Sysfs File description + +Author: Andy Fleming +Updated: 2005-07-28 + +SYSFS + +Several of the features of the gianfar driver are controlled +through sysfs files. These are: + +bd_stash: +To stash RX Buffer Descriptors in the L2, echo 'on' or '1' to +bd_stash, echo 'off' or '0' to disable + +rx_stash_len: +To stash the first n bytes of the packet in L2, echo the number +of bytes to buf_stash_len. echo 0 to disable. + +WARNING: You could really screw these up if you set them too low or high! +fifo_threshold: +To change the number of bytes the controller needs in the +fifo before it starts transmission, echo the number of bytes to +fifo_thresh. Range should be 0-511. + +fifo_starve: +When the FIFO has less than this many bytes during a transmit, it +enters starve mode, and increases the priority of TX memory +transactions. To change, echo the number of bytes to +fifo_starve. Range should be 0-511. + +fifo_starve_off: +Once in starve mode, the FIFO remains there until it has this +many bytes. To change, echo the number of bytes to +fifo_starve_off. Range should be 0-511. + +CHECKSUM OFFLOADING + +The eTSEC controller (first included in parts from late 2005 like +the 8548) has the ability to perform TCP, UDP, and IP checksums +in hardware. The Linux kernel only offloads the TCP and UDP +checksums (and always performs the pseudo header checksums), so +the driver only supports checksumming for TCP/IP and UDP/IP +packets. Use ethtool to enable or disable this feature for RX +and TX. + +VLAN + +In order to use VLAN, please consult Linux documentation on +configuring VLANs. The gianfar driver supports hardware insertion and +extraction of VLAN headers, but not filtering. Filtering will be +done by the kernel. + +MULTICASTING + +The gianfar driver supports using the group hash table on the +TSEC (and the extended hash table on the eTSEC) for multicast +filtering. On the eTSEC, the exact-match MAC registers are used +before the hash tables. See Linux documentation on how to join +multicast groups. + +PADDING + +The gianfar driver supports padding received frames with 2 bytes +to align the IP header to a 16-byte boundary, when supported by +hardware. + +ETHTOOL + +The gianfar driver supports the use of ethtool for many +configuration options. You must run ethtool only on currently +open interfaces. See ethtool documentation for details. diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 27822a2f068..50568140631 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -13,7 +13,10 @@ obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o -gianfar_driver-objs := gianfar.o gianfar_ethtool.o gianfar_mii.o +gianfar_driver-objs := gianfar.o \ + gianfar_ethtool.o \ + gianfar_mii.o \ + gianfar_sysfs.o # # link order important here diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 0f030b73cbb..146f9513aea 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2,7 +2,8 @@ * drivers/net/gianfar.c * * Gianfar Ethernet Driver - * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560 + * This driver is designed for the non-CPM ethernet controllers + * on the 85xx and 83xx family of integrated processors * Based on 8260_io/fcc_enet.c * * Author: Andy Fleming @@ -22,8 +23,6 @@ * B-V +1.62 * * Theory of operation - * This driver is designed for the non-CPM ethernet controllers - * on the 85xx and 83xx family of integrated processors * * The driver is initialized through platform_device. Structures which * define the configuration needed by the board are defined in a @@ -110,7 +109,7 @@ #endif const char gfar_driver_name[] = "Gianfar Ethernet"; -const char gfar_driver_version[] = "1.2"; +const char gfar_driver_version[] = "1.3"; static int gfar_enet_open(struct net_device *dev); static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); @@ -139,6 +138,10 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l static void gfar_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp); static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); +void gfar_halt(struct net_device *dev); +void gfar_start(struct net_device *dev); +static void gfar_clear_exact_match(struct net_device *dev); +static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr); extern struct ethtool_ops gfar_ethtool_ops; @@ -146,12 +149,10 @@ MODULE_AUTHOR("Freescale Semiconductor, Inc"); MODULE_DESCRIPTION("Gianfar Ethernet Driver"); MODULE_LICENSE("GPL"); -int gfar_uses_fcb(struct gfar_private *priv) +/* Returns 1 if incoming frames use an FCB */ +static inline int gfar_uses_fcb(struct gfar_private *priv) { - if (priv->vlan_enable || priv->rx_csum_enable) - return 1; - else - return 0; + return (priv->vlan_enable || priv->rx_csum_enable); } /* Set up the ethernet device structure, private data, @@ -320,15 +321,10 @@ static int gfar_probe(struct platform_device *pdev) else priv->padding = 0; - dev->hard_header_len += priv->padding; - if (dev->features & NETIF_F_IP_CSUM) dev->hard_header_len += GMAC_FCB_LEN; priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE; -#ifdef CONFIG_GFAR_BUFSTASH - priv->rx_stash_size = STASH_LENGTH; -#endif priv->tx_ring_size = DEFAULT_TX_RING_SIZE; priv->rx_ring_size = DEFAULT_RX_RING_SIZE; @@ -350,6 +346,9 @@ static int gfar_probe(struct platform_device *pdev) goto register_fail; } + /* Create all the sysfs files */ + gfar_init_sysfs(dev); + /* Print out the device info */ printk(KERN_INFO DEVICE_NAME, dev->name); for (idx = 0; idx < 6; idx++) @@ -357,8 +356,7 @@ static int gfar_probe(struct platform_device *pdev) printk("\n"); /* Even more device info helps when determining which kernel */ - /* provided which set of benchmarks. Since this is global for all */ - /* devices, we only print it once */ + /* provided which set of benchmarks. */ #ifdef CONFIG_GFAR_NAPI printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name); #else @@ -463,19 +461,9 @@ static void init_registers(struct net_device *dev) /* Initialize the max receive buffer length */ gfar_write(&priv->regs->mrblr, priv->rx_buffer_size); -#ifdef CONFIG_GFAR_BUFSTASH - /* If we are stashing buffers, we need to set the - * extraction length to the size of the buffer */ - gfar_write(&priv->regs->attreli, priv->rx_stash_size << 16); -#endif - /* Initialize the Minimum Frame Length Register */ gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS); - /* Setup Attributes so that snooping is on for rx */ - gfar_write(&priv->regs->attr, ATTR_INIT_SETTINGS); - gfar_write(&priv->regs->attreli, ATTRELI_INIT_SETTINGS); - /* Assign the TBI an address which won't conflict with the PHYs */ gfar_write(&priv->regs->tbipa, TBIPA_VALUE); } @@ -577,8 +565,7 @@ static void free_skb_resources(struct gfar_private *priv) for (i = 0; i < priv->rx_ring_size; i++) { if (priv->rx_skbuff[i]) { dma_unmap_single(NULL, rxbdp->bufPtr, - priv->rx_buffer_size - + RXBUF_ALIGNMENT, + priv->rx_buffer_size, DMA_FROM_DEVICE); dev_kfree_skb_any(priv->rx_skbuff[i]); @@ -636,6 +623,7 @@ int startup_gfar(struct net_device *dev) struct gfar *regs = priv->regs; int err = 0; u32 rctrl = 0; + u32 attrs = 0; gfar_write(®s->imask, IMASK_INIT_CLEAR); @@ -795,18 +783,50 @@ int startup_gfar(struct net_device *dev) if (priv->rx_csum_enable) rctrl |= RCTRL_CHECKSUMMING; - if (priv->extended_hash) + if (priv->extended_hash) { rctrl |= RCTRL_EXTHASH; + gfar_clear_exact_match(dev); + rctrl |= RCTRL_EMEN; + } + if (priv->vlan_enable) rctrl |= RCTRL_VLAN; + if (priv->padding) { + rctrl &= ~RCTRL_PAL_MASK; + rctrl |= RCTRL_PADDING(priv->padding); + } + /* Init rctrl based on our settings */ gfar_write(&priv->regs->rctrl, rctrl); if (dev->features & NETIF_F_IP_CSUM) gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); + /* Set the extraction length and index */ + attrs = ATTRELI_EL(priv->rx_stash_size) | + ATTRELI_EI(priv->rx_stash_index); + + gfar_write(&priv->regs->attreli, attrs); + + /* Start with defaults, and add stashing or locking + * depending on the approprate variables */ + attrs = ATTR_INIT_SETTINGS; + + if (priv->bd_stash_en) + attrs |= ATTR_BDSTASH; + + if (priv->rx_stash_size != 0) + attrs |= ATTR_BUFSTASH; + + gfar_write(&priv->regs->attr, attrs); + + gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold); + gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve); + gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off); + + /* Start the controller */ gfar_start(dev); return 0; @@ -851,34 +871,32 @@ static int gfar_enet_open(struct net_device *dev) return err; } -static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) +static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp) { struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN); memset(fcb, 0, GMAC_FCB_LEN); - /* Flag the bd so the controller looks for the FCB */ - bdp->status |= TXBD_TOE; - return fcb; } static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) { - int len; + u8 flags = 0; /* If we're here, it's a IP packet with a TCP or UDP * payload. We set it to checksum, using a pseudo-header * we provide */ - fcb->ip = 1; - fcb->tup = 1; - fcb->ctu = 1; - fcb->nph = 1; + flags = TXFCB_DEFAULT; - /* Notify the controller what the protocol is */ - if (skb->nh.iph->protocol == IPPROTO_UDP) - fcb->udp = 1; + /* Tell the controller what the protocol is */ + /* And provide the already calculated phcs */ + if (skb->nh.iph->protocol == IPPROTO_UDP) { + flags |= TXFCB_UDP; + fcb->phcs = skb->h.uh->check; + } else + fcb->phcs = skb->h.th->check; /* l3os is the distance between the start of the * frame (skb->data) and the start of the IP hdr. @@ -887,17 +905,12 @@ static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb) fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN); fcb->l4os = (u16)(skb->h.raw - skb->nh.raw); - len = skb->nh.iph->tot_len - fcb->l4os; - - /* Provide the pseudoheader csum */ - fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr, - skb->nh.iph->daddr, len, - skb->nh.iph->protocol, 0); + fcb->flags = flags; } -void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) +void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb) { - fcb->vln = 1; + fcb->flags |= TXFCB_VLN; fcb->vlctl = vlan_tx_tag_get(skb); } @@ -908,6 +921,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); struct txfcb *fcb = NULL; struct txbd8 *txbdp; + u16 status; /* Update transmit stats */ priv->stats.tx_bytes += skb->len; @@ -919,19 +933,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) txbdp = priv->cur_tx; /* Clear all but the WRAP status flags */ - txbdp->status &= TXBD_WRAP; + status = txbdp->status & TXBD_WRAP; /* Set up checksumming */ - if ((dev->features & NETIF_F_IP_CSUM) - && (CHECKSUM_HW == skb->ip_summed)) { + if (likely((dev->features & NETIF_F_IP_CSUM) + && (CHECKSUM_HW == skb->ip_summed))) { fcb = gfar_add_fcb(skb, txbdp); + status |= TXBD_TOE; gfar_tx_checksum(skb, fcb); } if (priv->vlan_enable && unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) { - if (NULL == fcb) + if (unlikely(NULL == fcb)) { fcb = gfar_add_fcb(skb, txbdp); + status |= TXBD_TOE; + } gfar_tx_vlan(skb, fcb); } @@ -949,14 +966,16 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size); /* Flag the BD as interrupt-causing */ - txbdp->status |= TXBD_INTERRUPT; + status |= TXBD_INTERRUPT; /* Flag the BD as ready to go, last in frame, and */ /* in need of CRC */ - txbdp->status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); + status |= (TXBD_READY | TXBD_LAST | TXBD_CRC); dev->trans_start = jiffies; + txbdp->status = status; + /* If this was the last BD in the ring, the next one */ /* is at the beginning of the ring */ if (txbdp->status & TXBD_WRAP) @@ -1010,21 +1029,7 @@ static struct net_device_stats * gfar_get_stats(struct net_device *dev) /* Changes the mac address if the controller is not running. */ int gfar_set_mac_address(struct net_device *dev) { - struct gfar_private *priv = netdev_priv(dev); - int i; - char tmpbuf[MAC_ADDR_LEN]; - u32 tempval; - - /* Now copy it into the mac registers backwards, cuz */ - /* little endian is silly */ - for (i = 0; i < MAC_ADDR_LEN; i++) - tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->dev_addr[i]; - - gfar_write(&priv->regs->macstnaddr1, *((u32 *) (tmpbuf))); - - tempval = *((u32 *) (tmpbuf + 4)); - - gfar_write(&priv->regs->macstnaddr2, tempval); + gfar_set_mac_for_addr(dev, 0, dev->dev_addr); return 0; } @@ -1110,7 +1115,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) INCREMENTAL_BUFFER_SIZE; /* Only stop and start the controller if it isn't already - * stopped */ + * stopped, and we changed something */ if ((oldsize != tempsize) && (dev->flags & IFF_UP)) stop_gfar(dev); @@ -1220,6 +1225,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs) struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) { + unsigned int alignamount; struct gfar_private *priv = netdev_priv(dev); struct sk_buff *skb = NULL; unsigned int timeout = SKB_ALLOC_TIMEOUT; @@ -1231,18 +1237,18 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) if (NULL == skb) return NULL; + alignamount = RXBUF_ALIGNMENT - + (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1)); + /* We need the data buffer to be aligned properly. We will reserve * as many bytes as needed to align the data properly */ - skb_reserve(skb, - RXBUF_ALIGNMENT - - (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1))); + skb_reserve(skb, alignamount); skb->dev = dev; bdp->bufPtr = dma_map_single(NULL, skb->data, - priv->rx_buffer_size + RXBUF_ALIGNMENT, - DMA_FROM_DEVICE); + priv->rx_buffer_size, DMA_FROM_DEVICE); bdp->length = 0; @@ -1350,7 +1356,7 @@ static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb) /* If valid headers were found, and valid sums * were verified, then we tell the kernel that no * checksumming is necessary. Otherwise, it is */ - if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu) + if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU)) skb->ip_summed = CHECKSUM_UNNECESSARY; else skb->ip_summed = CHECKSUM_NONE; @@ -1401,7 +1407,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, skb->protocol = eth_type_trans(skb, dev); /* Send the packet up the stack */ - if (unlikely(priv->vlgrp && fcb->vln)) + if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN))) ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl); else ret = RECEIVE(skb); @@ -1620,6 +1626,7 @@ static void adjust_link(struct net_device *dev) spin_lock_irqsave(&priv->lock, flags); if (phydev->link) { u32 tempval = gfar_read(®s->maccfg2); + u32 ecntrl = gfar_read(®s->ecntrl); /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ @@ -1644,6 +1651,13 @@ static void adjust_link(struct net_device *dev) case 10: tempval = ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII); + + /* Reduced mode distinguishes + * between 10 and 100 */ + if (phydev->speed == SPEED_100) + ecntrl |= ECNTRL_R100; + else + ecntrl &= ~(ECNTRL_R100); break; default: if (netif_msg_link(priv)) @@ -1657,6 +1671,7 @@ static void adjust_link(struct net_device *dev) } gfar_write(®s->maccfg2, tempval); + gfar_write(®s->ecntrl, ecntrl); if (!priv->oldlink) { new_state = 1; @@ -1721,6 +1736,9 @@ static void gfar_set_multi(struct net_device *dev) gfar_write(®s->gaddr6, 0xffffffff); gfar_write(®s->gaddr7, 0xffffffff); } else { + int em_num; + int idx; + /* zero out the hash */ gfar_write(®s->igaddr0, 0x0); gfar_write(®s->igaddr1, 0x0); @@ -1739,18 +1757,47 @@ static void gfar_set_multi(struct net_device *dev) gfar_write(®s->gaddr6, 0x0); gfar_write(®s->gaddr7, 0x0); + /* If we have extended hash tables, we need to + * clear the exact match registers to prepare for + * setting them */ + if (priv->extended_hash) { + em_num = GFAR_EM_NUM + 1; + gfar_clear_exact_match(dev); + idx = 1; + } else { + idx = 0; + em_num = 0; + } + if(dev->mc_count == 0) return; /* Parse the list, and set the appropriate bits */ for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { - gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); + if (idx < em_num) { + gfar_set_mac_for_addr(dev, idx, + mc_ptr->dmi_addr); + idx++; + } else + gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr); } } return; } + +/* Clears each of the exact match registers to zero, so they + * don't interfere with normal reception */ +static void gfar_clear_exact_match(struct net_device *dev) +{ + int idx; + u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0}; + + for(idx = 1;idx < GFAR_EM_NUM + 1;idx++) + gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr); +} + /* Set the appropriate hash bit for the given addr */ /* The algorithm works like so: * 1) Take the Destination Address (ie the multicast address), and @@ -1781,6 +1828,32 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr) return; } + +/* There are multiple MAC Address register pairs on some controllers + * This function sets the numth pair to a given address + */ +static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr) +{ + struct gfar_private *priv = netdev_priv(dev); + int idx; + char tmpbuf[MAC_ADDR_LEN]; + u32 tempval; + u32 *macptr = &priv->regs->macstnaddr1; + + macptr += num*2; + + /* Now copy it into the mac registers backwards, cuz */ + /* little endian is silly */ + for (idx = 0; idx < MAC_ADDR_LEN; idx++) + tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx]; + + gfar_write(macptr, *((u32 *) (tmpbuf))); + + tempval = *((u32 *) (tmpbuf + 4)); + + gfar_write(macptr+1, tempval); +} + /* GFAR error interrupt handler */ static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs) { diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 5065ba82cb7..94a91da84fb 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -90,12 +90,26 @@ extern const char gfar_driver_version[]; #define GFAR_RX_MAX_RING_SIZE 256 #define GFAR_TX_MAX_RING_SIZE 256 +#define GFAR_MAX_FIFO_THRESHOLD 511 +#define GFAR_MAX_FIFO_STARVE 511 +#define GFAR_MAX_FIFO_STARVE_OFF 511 + #define DEFAULT_RX_BUFFER_SIZE 1536 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) #define JUMBO_BUFFER_SIZE 9728 #define JUMBO_FRAME_SIZE 9600 +#define DEFAULT_FIFO_TX_THR 0x100 +#define DEFAULT_FIFO_TX_STARVE 0x40 +#define DEFAULT_FIFO_TX_STARVE_OFF 0x80 +#define DEFAULT_BD_STASH 1 +#define DEFAULT_STASH_LENGTH 64 +#define DEFAULT_STASH_INDEX 0 + +/* The number of Exact Match registers */ +#define GFAR_EM_NUM 15 + /* Latency of interface clock in nanoseconds */ /* Interface clock latency , in this case, means the * time described by a value of 1 in the interrupt @@ -112,11 +126,11 @@ extern const char gfar_driver_version[]; #define DEFAULT_TX_COALESCE 1 #define DEFAULT_TXCOUNT 16 -#define DEFAULT_TXTIME 400 +#define DEFAULT_TXTIME 4 #define DEFAULT_RX_COALESCE 1 #define DEFAULT_RXCOUNT 16 -#define DEFAULT_RXTIME 400 +#define DEFAULT_RXTIME 4 #define TBIPA_VALUE 0x1f #define MIIMCFG_INIT_VALUE 0x00000007 @@ -147,6 +161,7 @@ extern const char gfar_driver_version[]; #define ECNTRL_INIT_SETTINGS 0x00001000 #define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_R100 0x00000008 #define MRBLR_INIT_SETTINGS DEFAULT_RX_BUFFER_SIZE @@ -181,10 +196,12 @@ extern const char gfar_driver_version[]; #define RCTRL_PRSDEP_MASK 0x000000c0 #define RCTRL_PRSDEP_INIT 0x000000c0 #define RCTRL_PROM 0x00000008 +#define RCTRL_EMEN 0x00000002 #define RCTRL_CHECKSUMMING (RCTRL_IPCSEN \ | RCTRL_TUCSEN | RCTRL_PRSDEP_INIT) #define RCTRL_EXTHASH (RCTRL_GHTX) #define RCTRL_VLAN (RCTRL_PRSDEP_INIT) +#define RCTRL_PADDING(x) ((x << 16) & RCTRL_PAL_MASK) #define RSTAT_CLEAR_RHALT 0x00800000 @@ -251,28 +268,26 @@ extern const char gfar_driver_version[]; IMASK_XFUN | IMASK_RXC | IMASK_BABT | IMASK_DPE \ | IMASK_PERR) +/* Fifo management */ +#define FIFO_TX_THR_MASK 0x01ff +#define FIFO_TX_STARVE_MASK 0x01ff +#define FIFO_TX_STARVE_OFF_MASK 0x01ff /* Attribute fields */ /* This enables rx snooping for buffers and descriptors */ -#ifdef CONFIG_GFAR_BDSTASH #define ATTR_BDSTASH 0x00000800 -#else -#define ATTR_BDSTASH 0x00000000 -#endif -#ifdef CONFIG_GFAR_BUFSTASH #define ATTR_BUFSTASH 0x00004000 -#define STASH_LENGTH 64 -#else -#define ATTR_BUFSTASH 0x00000000 -#endif #define ATTR_SNOOPING 0x000000c0 -#define ATTR_INIT_SETTINGS (ATTR_SNOOPING \ - | ATTR_BDSTASH | ATTR_BUFSTASH) +#define ATTR_INIT_SETTINGS ATTR_SNOOPING #define ATTRELI_INIT_SETTINGS 0x0 +#define ATTRELI_EL_MASK 0x3fff0000 +#define ATTRELI_EL(x) (x << 16) +#define ATTRELI_EI_MASK 0x00003fff +#define ATTRELI_EI(x) (x) /* TxBD status field bits */ @@ -328,6 +343,7 @@ extern const char gfar_driver_version[]; #define RXFCB_CTU 0x0400 #define RXFCB_EIP 0x0200 #define RXFCB_ETU 0x0100 +#define RXFCB_CSUM_MASK 0x0f00 #define RXFCB_PERR_MASK 0x000c #define RXFCB_PERR_BADL3 0x0008 @@ -339,14 +355,7 @@ struct txbd8 }; struct txfcb { - u8 vln:1, - ip:1, - ip6:1, - tup:1, - udp:1, - cip:1, - ctu:1, - nph:1; + u8 flags; u8 reserved; u8 l4os; /* Level 4 Header Offset */ u8 l3os; /* Level 3 Header Offset */ @@ -362,14 +371,7 @@ struct rxbd8 }; struct rxfcb { - u16 vln:1, - ip:1, - ip6:1, - tup:1, - cip:1, - ctu:1, - eip:1, - etu:1; + u16 flags; u8 rq; /* Receive Queue index */ u8 pro; /* Layer 4 Protocol */ u16 reserved; @@ -688,12 +690,17 @@ struct gfar_private { spinlock_t lock; unsigned int rx_buffer_size; unsigned int rx_stash_size; + unsigned int rx_stash_index; unsigned int tx_ring_size; unsigned int rx_ring_size; + unsigned int fifo_threshold; + unsigned int fifo_starve; + unsigned int fifo_starve_off; unsigned char vlan_enable:1, rx_csum_enable:1, - extended_hash:1; + extended_hash:1, + bd_stash_en:1; unsigned short padding; struct vlan_group *vlgrp; /* Info structure initialized by board setup code */ @@ -731,6 +738,6 @@ extern void stop_gfar(struct net_device *dev); extern void gfar_halt(struct net_device *dev); extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev, int enable, u32 regnum, u32 read); -void gfar_setup_stashing(struct net_device *dev); +void gfar_init_sysfs(struct net_device *dev); #endif /* __GIANFAR_H */ diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index cfa3cd7c91a..765e810620f 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -125,7 +125,7 @@ static char stat_gstrings[][ETH_GSTRING_LEN] = { static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) { struct gfar_private *priv = netdev_priv(dev); - + if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); else diff --git a/drivers/net/gianfar_mii.h b/drivers/net/gianfar_mii.h index e85eb216fb5..d527cf2f9c1 100644 --- a/drivers/net/gianfar_mii.h +++ b/drivers/net/gianfar_mii.h @@ -24,6 +24,7 @@ #define MII_READ_COMMAND 0x00000001 #define GFAR_SUPPORTED (SUPPORTED_10baseT_Half \ + | SUPPORTED_10baseT_Full \ | SUPPORTED_100baseT_Half \ | SUPPORTED_100baseT_Full \ | SUPPORTED_Autoneg \ diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c new file mode 100644 index 00000000000..10d34cb1919 --- /dev/null +++ b/drivers/net/gianfar_sysfs.c @@ -0,0 +1,311 @@ +/* + * drivers/net/gianfar_sysfs.c + * + * Gianfar Ethernet Driver + * This driver is designed for the non-CPM ethernet controllers + * on the 85xx and 83xx family of integrated processors + * Based on 8260_io/fcc_enet.c + * + * Author: Andy Fleming + * Maintainer: Kumar Gala (kumar.gala@freescale.com) + * + * Copyright (c) 2002-2005 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Sysfs file creation and management + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "gianfar.h" + +#define GFAR_ATTR(_name) \ +static ssize_t gfar_show_##_name(struct class_device *cdev, char *buf); \ +static ssize_t gfar_set_##_name(struct class_device *cdev, \ + const char *buf, size_t count); \ +static CLASS_DEVICE_ATTR(_name, 0644, gfar_show_##_name, gfar_set_##_name) + +#define GFAR_CREATE_FILE(_dev, _name) \ + class_device_create_file(&_dev->class_dev, &class_device_attr_##_name) + +GFAR_ATTR(bd_stash); +GFAR_ATTR(rx_stash_size); +GFAR_ATTR(rx_stash_index); +GFAR_ATTR(fifo_threshold); +GFAR_ATTR(fifo_starve); +GFAR_ATTR(fifo_starve_off); + +#define to_net_dev(cd) container_of(cd, struct net_device, class_dev) + +static ssize_t gfar_show_bd_stash(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%s\n", priv->bd_stash_en? "on" : "off"); +} + +static ssize_t gfar_set_bd_stash(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + int new_setting = 0; + u32 temp; + unsigned long flags; + + /* Find out the new setting */ + if (!strncmp("on", buf, count-1) || !strncmp("1", buf, count-1)) + new_setting = 1; + else if (!strncmp("off", buf, count-1) || !strncmp("0", buf, count-1)) + new_setting = 0; + else + return count; + + spin_lock_irqsave(&priv->lock, flags); + + /* Set the new stashing value */ + priv->bd_stash_en = new_setting; + + temp = gfar_read(&priv->regs->attr); + + if (new_setting) + temp |= ATTR_BDSTASH; + else + temp &= ~(ATTR_BDSTASH); + + gfar_write(&priv->regs->attr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_rx_stash_size(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->rx_stash_size); +} + +static ssize_t gfar_set_rx_stash_size(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int length = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (length > priv->rx_buffer_size) + return count; + + if (length == priv->rx_stash_size) + return count; + + priv->rx_stash_size = length; + + temp = gfar_read(&priv->regs->attreli); + temp &= ~ATTRELI_EL_MASK; + temp |= ATTRELI_EL(length); + gfar_write(&priv->regs->attreli, temp); + + /* Turn stashing on/off as appropriate */ + temp = gfar_read(&priv->regs->attr); + + if (length) + temp |= ATTR_BUFSTASH; + else + temp &= ~(ATTR_BUFSTASH); + + gfar_write(&priv->regs->attr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + + +/* Stashing will only be enabled when rx_stash_size != 0 */ +static ssize_t gfar_show_rx_stash_index(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->rx_stash_index); +} + +static ssize_t gfar_set_rx_stash_index(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned short index = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (index > priv->rx_stash_size) + return count; + + if (index == priv->rx_stash_index) + return count; + + priv->rx_stash_index = index; + + temp = gfar_read(&priv->regs->attreli); + temp &= ~ATTRELI_EI_MASK; + temp |= ATTRELI_EI(index); + gfar_write(&priv->regs->attreli, flags); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_threshold(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_threshold); +} + +static ssize_t gfar_set_fifo_threshold(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int length = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (length > GFAR_MAX_FIFO_THRESHOLD) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_threshold = length; + + temp = gfar_read(&priv->regs->fifo_tx_thr); + temp &= ~FIFO_TX_THR_MASK; + temp |= length; + gfar_write(&priv->regs->fifo_tx_thr, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_starve(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_starve); +} + + +static ssize_t gfar_set_fifo_starve(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int num = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (num > GFAR_MAX_FIFO_STARVE) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_starve = num; + + temp = gfar_read(&priv->regs->fifo_tx_starve); + temp &= ~FIFO_TX_STARVE_MASK; + temp |= num; + gfar_write(&priv->regs->fifo_tx_starve, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static ssize_t gfar_show_fifo_starve_off(struct class_device *cdev, char *buf) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + + return sprintf(buf, "%d\n", priv->fifo_starve_off); +} + +static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev, + const char *buf, size_t count) +{ + struct net_device *dev = to_net_dev(cdev); + struct gfar_private *priv = netdev_priv(dev); + unsigned int num = simple_strtoul(buf, NULL, 0); + u32 temp; + unsigned long flags; + + if (num > GFAR_MAX_FIFO_STARVE_OFF) + return count; + + spin_lock_irqsave(&priv->lock, flags); + + priv->fifo_starve_off = num; + + temp = gfar_read(&priv->regs->fifo_tx_starve_shutoff); + temp &= ~FIFO_TX_STARVE_OFF_MASK; + temp |= num; + gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp); + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +void gfar_init_sysfs(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + /* Initialize the default values */ + priv->rx_stash_size = DEFAULT_STASH_LENGTH; + priv->rx_stash_index = DEFAULT_STASH_INDEX; + priv->fifo_threshold = DEFAULT_FIFO_TX_THR; + priv->fifo_starve = DEFAULT_FIFO_TX_STARVE; + priv->fifo_starve_off = DEFAULT_FIFO_TX_STARVE_OFF; + priv->bd_stash_en = DEFAULT_BD_STASH; + + /* Create our sysfs files */ + GFAR_CREATE_FILE(dev, bd_stash); + GFAR_CREATE_FILE(dev, rx_stash_size); + GFAR_CREATE_FILE(dev, rx_stash_index); + GFAR_CREATE_FILE(dev, fifo_threshold); + GFAR_CREATE_FILE(dev, fifo_starve); + GFAR_CREATE_FILE(dev, fifo_starve_off); + +} -- cgit v1.2.3-70-g09d2 From 15d014d13149aedd76cbff1b5c3bbfe839391457 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Nov 2005 18:23:13 +0100 Subject: [PATCH] intel ixp2000 network driver The way the hardware and firmware work is that there is one shared RX queue and IRQ for a number of different network interfaces. Due to this, we would like to process received packets for every interface in the same NAPI poll handler, so we need a pseudo-device to schedule polling on. What the driver currently does is that it always schedules polling for the first network interface in the list, and processes packets for every interface in the poll handler for that first interface -- however, this scheme breaks down if the first network interface happens to not be up, since netif_rx_schedule_prep() checks netif_running(). sky2 apparently has the same issue, and Stephen Hemminger suggested a way to work around this: create a variant of netif_rx_schedule_prep() that does not check netif_running(). I implemented this locally and called it netif_rx_schedule_prep_notup(), and it seems to work well, but it's something that probably not everyone would be happy with. The ixp2000 is an ARM CPU with a high-speed network interface in the CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.) The CPU package also contains 8 or 16 (again depending on the IXP model) 'microengines', which are somewhat primitive but very fast and efficient processor cores which can be used to offload various things from the main CPU. This driver makes the high-speed network interface in the CPU visible and usable as a regular linux network device. Currently, it only supports the Radisys ENP2611 IXP board, but adding support for other board types should be fairly easy. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 + drivers/net/Makefile | 1 + drivers/net/ixp2000/Kconfig | 6 + drivers/net/ixp2000/Makefile | 3 + drivers/net/ixp2000/caleb.c | 136 ++++++++++++ drivers/net/ixp2000/caleb.h | 22 ++ drivers/net/ixp2000/enp2611.c | 238 ++++++++++++++++++++ drivers/net/ixp2000/ixp2400-msf.c | 213 ++++++++++++++++++ drivers/net/ixp2000/ixp2400-msf.h | 115 ++++++++++ drivers/net/ixp2000/ixp2400_rx.uc | 408 +++++++++++++++++++++++++++++++++++ drivers/net/ixp2000/ixp2400_rx.ucode | 130 +++++++++++ drivers/net/ixp2000/ixp2400_tx.uc | 272 +++++++++++++++++++++++ drivers/net/ixp2000/ixp2400_tx.ucode | 98 +++++++++ drivers/net/ixp2000/ixpdev.c | 404 ++++++++++++++++++++++++++++++++++ drivers/net/ixp2000/ixpdev.h | 27 +++ drivers/net/ixp2000/ixpdev_priv.h | 57 +++++ drivers/net/ixp2000/pm3386.c | 304 ++++++++++++++++++++++++++ drivers/net/ixp2000/pm3386.h | 26 +++ 18 files changed, 2462 insertions(+) create mode 100644 drivers/net/ixp2000/Kconfig create mode 100644 drivers/net/ixp2000/Makefile create mode 100644 drivers/net/ixp2000/caleb.c create mode 100644 drivers/net/ixp2000/caleb.h create mode 100644 drivers/net/ixp2000/enp2611.c create mode 100644 drivers/net/ixp2000/ixp2400-msf.c create mode 100644 drivers/net/ixp2000/ixp2400-msf.h create mode 100644 drivers/net/ixp2000/ixp2400_rx.uc create mode 100644 drivers/net/ixp2000/ixp2400_rx.ucode create mode 100644 drivers/net/ixp2000/ixp2400_tx.uc create mode 100644 drivers/net/ixp2000/ixp2400_tx.ucode create mode 100644 drivers/net/ixp2000/ixpdev.c create mode 100644 drivers/net/ixp2000/ixpdev.h create mode 100644 drivers/net/ixp2000/ixpdev_priv.h create mode 100644 drivers/net/ixp2000/pm3386.c create mode 100644 drivers/net/ixp2000/pm3386.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 39415b5c456..fca6000d6e0 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1901,6 +1901,8 @@ config E1000_NAPI If in doubt, say N. +source "drivers/net/ixp2000/Kconfig" + config MYRI_SBUS tristate "MyriCOM Gigabit Ethernet support" depends on SBUS diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 50568140631..b74a7cb5bae 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -206,6 +206,7 @@ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ obj-$(CONFIG_ETRAX_ETHERNET) += cris/ +obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ obj-$(CONFIG_NETCONSOLE) += netconsole.o diff --git a/drivers/net/ixp2000/Kconfig b/drivers/net/ixp2000/Kconfig new file mode 100644 index 00000000000..2fec2415651 --- /dev/null +++ b/drivers/net/ixp2000/Kconfig @@ -0,0 +1,6 @@ +config ENP2611_MSF_NET + tristate "Radisys ENP2611 MSF network interface support" + depends on ARCH_ENP2611 + help + This is a driver for the MSF network interface unit in + the IXP2400 on the Radisys ENP2611 platform. diff --git a/drivers/net/ixp2000/Makefile b/drivers/net/ixp2000/Makefile new file mode 100644 index 00000000000..fd38351ceaa --- /dev/null +++ b/drivers/net/ixp2000/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o + +enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c new file mode 100644 index 00000000000..d70530adb1e --- /dev/null +++ b/drivers/net/ixp2000/caleb.c @@ -0,0 +1,136 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#define CALEB_IDLO 0x00 +#define CALEB_IDHI 0x01 +#define CALEB_RID 0x02 +#define CALEB_RESET 0x03 +#define CALEB_INTREN0 0x04 +#define CALEB_INTREN1 0x05 +#define CALEB_INTRSTAT0 0x06 +#define CALEB_INTRSTAT1 0x07 +#define CALEB_PORTEN 0x08 +#define CALEB_BURST 0x09 +#define CALEB_PORTPAUS 0x0A +#define CALEB_PORTPAUSD 0x0B +#define CALEB_PHY0RX 0x10 +#define CALEB_PHY1RX 0x11 +#define CALEB_PHY0TX 0x12 +#define CALEB_PHY1TX 0x13 +#define CALEB_IXPRX_HI_CNTR 0x15 +#define CALEB_PHY0RX_HI_CNTR 0x16 +#define CALEB_PHY1RX_HI_CNTR 0x17 +#define CALEB_IXPRX_CNTR 0x18 +#define CALEB_PHY0RX_CNTR 0x19 +#define CALEB_PHY1RX_CNTR 0x1A +#define CALEB_IXPTX_CNTR 0x1B +#define CALEB_PHY0TX_CNTR 0x1C +#define CALEB_PHY1TX_CNTR 0x1D +#define CALEB_DEBUG0 0x1E +#define CALEB_DEBUG1 0x1F + + +static u8 caleb_reg_read(int reg) +{ + u8 value; + + value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); + +// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); + + return value; +} + +static void caleb_reg_write(int reg, u8 value) +{ + u8 dummy; + +// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); + + *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; + + dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + + +void caleb_reset(void) +{ + /* + * Perform a chip reset. + */ + caleb_reg_write(CALEB_RESET, 0x02); + udelay(1); + + /* + * Enable all interrupt sources. This is needed to get + * meaningful results out of the status bits (register 6 + * and 7.) + */ + caleb_reg_write(CALEB_INTREN0, 0xff); + caleb_reg_write(CALEB_INTREN1, 0x07); + + /* + * Set RX and TX FIFO thresholds to 1.5kb. + */ + caleb_reg_write(CALEB_PHY0RX, 0x11); + caleb_reg_write(CALEB_PHY1RX, 0x11); + caleb_reg_write(CALEB_PHY0TX, 0x11); + caleb_reg_write(CALEB_PHY1TX, 0x11); + + /* + * Program SPI-3 burst size. + */ + caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets +// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets +} + +void caleb_enable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << port; + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_rx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << port); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_enable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp |= 1 << (port + 4); + caleb_reg_write(CALEB_PORTEN, temp); +} + +void caleb_disable_tx(int port) +{ + u8 temp; + + temp = caleb_reg_read(CALEB_PORTEN); + temp &= ~(1 << (port + 4)); + caleb_reg_write(CALEB_PORTEN, temp); +} diff --git a/drivers/net/ixp2000/caleb.h b/drivers/net/ixp2000/caleb.h new file mode 100644 index 00000000000..e93a1ef5b8a --- /dev/null +++ b/drivers/net/ixp2000/caleb.h @@ -0,0 +1,22 @@ +/* + * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __CALEB_H +#define __CALEB_H + +void caleb_reset(void); +void caleb_enable_rx(int port); +void caleb_disable_rx(int port); +void caleb_enable_tx(int port); +void caleb_disable_tx(int port); + + +#endif diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c new file mode 100644 index 00000000000..3262e70ede6 --- /dev/null +++ b/drivers/net/ixp2000/enp2611.c @@ -0,0 +1,238 @@ +/* + * IXP2400 MSF network device driver for the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ixpdev.h" +#include "caleb.h" +#include "ixp2400-msf.h" +#include "pm3386.h" + +/*********************************************************************** + * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC + * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA + * to the IXP2400. + * + * +-------------+ + * SFP GBIC #0 ---+ | +---------+ + * | PM3386 #0 +-------+ | + * SFP GBIC #1 ---+ | | "Caleb" | +---------+ + * +-------------+ | | | | + * | SPI-3 +---------+ IXP2400 | + * +-------------+ | bridge | | | + * SFP GBIC #2 ---+ | | FPGA | +---------+ + * | PM3386 #1 +-------+ | + * | | +---------+ + * +-------------+ + * ^ ^ ^ + * | 1.25Gbaud | 104MHz | 104MHz + * | SERDES ea. | SPI-3 ea. | SPI-3 + * + ***********************************************************************/ +static struct ixp2400_msf_parameters enp2611_msf_parameters = +{ + .rx_mode = IXP2400_RX_MODE_UTOPIA_POS | + IXP2400_RX_MODE_1x32 | + IXP2400_RX_MODE_MPHY | + IXP2400_RX_MODE_MPHY_32 | + IXP2400_RX_MODE_MPHY_POLLED_STATUS | + IXP2400_RX_MODE_MPHY_LEVEL3 | + IXP2400_RX_MODE_RBUF_SIZE_64, + + .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .rx_poll_ports = 3, + + .rx_channel_mode = { + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_RX_MODE_MASTER | + IXP2400_PORT_RX_MODE_POS_PHY | + IXP2400_PORT_RX_MODE_POS_PHY_L3 | + IXP2400_PORT_RX_MODE_ODD_PARITY | + IXP2400_PORT_RX_MODE_2_CYCLE_DECODE + }, + + .tx_mode = IXP2400_TX_MODE_UTOPIA_POS | + IXP2400_TX_MODE_1x32 | + IXP2400_TX_MODE_MPHY | + IXP2400_TX_MODE_MPHY_32 | + IXP2400_TX_MODE_MPHY_POLLED_STATUS | + IXP2400_TX_MODE_MPHY_LEVEL3 | + IXP2400_TX_MODE_TBUF_SIZE_64, + + .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, + + .tx_poll_ports = 3, + + .tx_channel_mode = { + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, + + IXP2400_PORT_TX_MODE_MASTER | + IXP2400_PORT_TX_MODE_POS_PHY | + IXP2400_PORT_TX_MODE_ODD_PARITY | + IXP2400_PORT_TX_MODE_2_CYCLE_DECODE + } +}; + +struct enp2611_ixpdev_priv +{ + struct ixpdev_priv ixpdev_priv; + struct net_device_stats stats; +}; + +static struct net_device *nds[3]; +static struct timer_list link_check_timer; + +static struct net_device_stats *enp2611_get_stats(struct net_device *dev) +{ + struct enp2611_ixpdev_priv *ip = netdev_priv(dev); + + pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats)); + + return &(ip->stats); +} + +/* @@@ Poll the SFP moddef0 line too. */ +/* @@@ Try to use the pm3386 DOOL interrupt as well. */ +static void enp2611_check_link_status(unsigned long __dummy) +{ + int i; + + for (i = 0; i < 3; i++) { + struct net_device *dev; + int status; + + if (!netif_running(nds[i])) + continue; + + dev = nds[i]; + + status = pm3386_is_link_up(i); + if (status && !netif_carrier_ok(nds[i])) { + pm3386_enable_tx(i); + caleb_enable_tx(i); + netif_carrier_on(nds[i]); + } else if (!status && netif_carrier_ok(nds[i])) { + netif_carrier_off(nds[i]); + caleb_disable_tx(i); + pm3386_disable_tx(i); + } + } + + link_check_timer.expires = jiffies + HZ / 10; + add_timer(&link_check_timer); +} + +static void enp2611_set_port_admin_status(int port, int up) +{ + if (up) { + caleb_enable_rx(port); + pm3386_enable_rx(port); + } else { + caleb_disable_tx(port); + pm3386_disable_tx(port); + pm3386_disable_rx(port); + caleb_disable_rx(port); + } +} + +static int __init enp2611_init_module(void) +{ + int i; + + if (!machine_is_enp2611()) + return -ENODEV; + + caleb_reset(); + pm3386_reset(); + + for (i = 0; i < 3; i++) { + nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv)); + if (nds[i] == NULL) { + while (--i >= 0) + free_netdev(nds[i]); + return -ENOMEM; + } + + SET_MODULE_OWNER(nds[i]); + nds[i]->get_stats = enp2611_get_stats; + pm3386_init_port(i); + pm3386_get_mac(i, nds[i]->dev_addr); + } + + ixp2400_msf_init(&enp2611_msf_parameters); + + if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) { + for (i = 0; i < 3; i++) + free_netdev(nds[i]); + return -EINVAL; + } + + init_timer(&link_check_timer); + link_check_timer.function = enp2611_check_link_status; + link_check_timer.expires = jiffies; + add_timer(&link_check_timer); + + return 0; +} + +static void __exit enp2611_cleanup_module(void) +{ + int i; + + del_timer_sync(&link_check_timer); + + ixpdev_deinit(); + for (i = 0; i < 3; i++) + free_netdev(nds[i]); +} + +module_init(enp2611_init_module); +module_exit(enp2611_cleanup_module); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ixp2000/ixp2400-msf.c b/drivers/net/ixp2000/ixp2400-msf.c new file mode 100644 index 00000000000..48a3a891d3a --- /dev/null +++ b/drivers/net/ixp2000/ixp2400-msf.c @@ -0,0 +1,213 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "ixp2400-msf.h" + +/* + * This is the Intel recommended PLL init procedure as described on + * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual. + */ +static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp) +{ + int rx_dual_clock; + int tx_dual_clock; + u32 value; + + /* + * If the RX mode is not 1x32, we have to enable both RX PLLs + * (#0 and #1.) The same thing for the TX direction. + */ + rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK); + tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK); + + /* + * Read initial value. + */ + value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL); + + /* + * Put PLLs in powerdown and bypass mode. + */ + value |= 0x0000f0f0; + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Set single or dual clock mode bits. + */ + value &= ~0x03000000; + value |= (rx_dual_clock << 24) | (tx_dual_clock << 25); + + /* + * Set multipliers. + */ + value &= ~0x00ff0000; + value |= mp->rxclk01_multiplier << 16; + value |= mp->rxclk23_multiplier << 18; + value |= mp->txclk01_multiplier << 20; + value |= mp->txclk23_multiplier << 22; + + /* + * And write value. + */ + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Disable PLL bypass mode. + */ + value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Turn on PLLs. + */ + value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7); + ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); + + /* + * Wait for PLLs to lock. There are lock status bits, but IXP2400 + * erratum #65 says that these lock bits should not be relied upon + * as they might not accurately reflect the true state of the PLLs. + */ + udelay(100); +} + +/* + * Needed according to p480 of Programmer's Reference Manual. + */ +static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp) +{ + int size_bits; + int i; + + /* + * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer + * corruption) in the Intel-recommended way: do not add the RBUF + * elements susceptible to corruption to the freelist. + */ + size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK; + if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) { + for (i = 1; i < 128; i++) { + if (i == 9 || i == 18 || i == 27) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) { + for (i = 1; i < 64; i++) { + if (i == 4 || i == 9 || i == 13) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) { + for (i = 1; i < 32; i++) { + if (i == 2 || i == 4 || i == 6) + continue; + ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); + } + } +} + +static u32 ixp2400_msf_valid_channels(u32 reg) +{ + u32 channels; + + channels = 0; + switch (reg & IXP2400_RX_MODE_WIDTH_MASK) { + case IXP2400_RX_MODE_1x32: + channels = 0x1; + if (reg & IXP2400_RX_MODE_MPHY && + !(reg & IXP2400_RX_MODE_MPHY_32)) + channels = 0xf; + break; + + case IXP2400_RX_MODE_2x16: + channels = 0x5; + break; + + case IXP2400_RX_MODE_4x8: + channels = 0xf; + break; + + case IXP2400_RX_MODE_1x16_2x8: + channels = 0xd; + break; + } + + return channels; +} + +static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value); +} + +static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp) +{ + u32 value; + + value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff; + value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28; + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value); +} + + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp) +{ + u32 value; + int i; + + /* + * Init the RX/TX PLLs based on the passed parameter block. + */ + ixp2400_pll_init(mp); + + /* + * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF. + */ + value = ixp2000_reg_read(IXP2000_RESET0); + ixp2000_reg_write(IXP2000_RESET0, value | 0x80); + ixp2000_reg_write(IXP2000_RESET0, value & ~0x80); + + /* + * Initialise the RX section. + */ + ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i, + mp->rx_channel_mode[i]); + } + ixp2400_msf_free_rbuf_entries(mp); + ixp2400_msf_enable_rx(mp); + + /* + * Initialise the TX section. + */ + ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1); + ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode); + for (i = 0; i < 4; i++) { + ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i, + mp->tx_channel_mode[i]); + } + ixp2400_msf_enable_tx(mp); +} diff --git a/drivers/net/ixp2000/ixp2400-msf.h b/drivers/net/ixp2000/ixp2400-msf.h new file mode 100644 index 00000000000..3ac1af2771d --- /dev/null +++ b/drivers/net/ixp2000/ixp2400-msf.h @@ -0,0 +1,115 @@ +/* + * Generic library functions for the MSF (Media and Switch Fabric) unit + * found on the Intel IXP2400 network processor. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2400_MSF_H +#define __IXP2400_MSF_H + +struct ixp2400_msf_parameters +{ + u32 rx_mode; + unsigned rxclk01_multiplier:2; + unsigned rxclk23_multiplier:2; + unsigned rx_poll_ports:6; + u32 rx_channel_mode[4]; + + u32 tx_mode; + unsigned txclk01_multiplier:2; + unsigned txclk23_multiplier:2; + unsigned tx_poll_ports:6; + u32 tx_channel_mode[4]; +}; + +void ixp2400_msf_init(struct ixp2400_msf_parameters *mp); + +#define IXP2400_PLL_MULTIPLIER_48 0x00 +#define IXP2400_PLL_MULTIPLIER_24 0x01 +#define IXP2400_PLL_MULTIPLIER_16 0x02 +#define IXP2400_PLL_MULTIPLIER_12 0x03 + +#define IXP2400_RX_MODE_CSIX 0x00400000 +#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_RX_MODE_1x16_2x8 0x00300000 +#define IXP2400_RX_MODE_4x8 0x00200000 +#define IXP2400_RX_MODE_2x16 0x00100000 +#define IXP2400_RX_MODE_1x32 0x00000000 +#define IXP2400_RX_MODE_MPHY 0x00080000 +#define IXP2400_RX_MODE_SPHY 0x00000000 +#define IXP2400_RX_MODE_MPHY_32 0x00040000 +#define IXP2400_RX_MODE_MPHY_4 0x00000000 +#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200 +#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000 +#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c +#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008 +#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004 +#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_RX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020 +#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000 +#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000 +#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000 + +#define IXP2400_TX_MODE_CSIX 0x00400000 +#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000 +#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000 +#define IXP2400_TX_MODE_1x16_2x8 0x00300000 +#define IXP2400_TX_MODE_4x8 0x00200000 +#define IXP2400_TX_MODE_2x16 0x00100000 +#define IXP2400_TX_MODE_1x32 0x00000000 +#define IXP2400_TX_MODE_MPHY 0x00080000 +#define IXP2400_TX_MODE_SPHY 0x00000000 +#define IXP2400_TX_MODE_MPHY_32 0x00040000 +#define IXP2400_TX_MODE_MPHY_4 0x00000000 +#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000 +#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000 +#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000 +#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000 +#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000 +#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000 +#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000 +#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000 +#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c +#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008 +#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004 +#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000 + +#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040 +#define IXP2400_PORT_TX_MODE_MASTER 0x00000000 +#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010 +#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000 +#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c +#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008 +#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000 +#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002 +#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001 +#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000 + + +#endif diff --git a/drivers/net/ixp2000/ixp2400_rx.uc b/drivers/net/ixp2000/ixp2400_rx.uc new file mode 100644 index 00000000000..42a73e357af --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_rx.uc @@ -0,0 +1,408 @@ +/* + * RX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one full element list is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The RBUF uses 64-byte mpackets. + * - RX descriptors reside in SRAM, and have the following format: + * struct rx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 buf_length; + * + * // from uengine + * u32 channel; + * u32 pkt_length; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 0 is rx_pending. + * - Scratch ring 1 is rx_done, and has status condition 'full'. + * - The host triggers rx_done flush and rx_pending refill on seeing INTA. + * - This code is run on all eight threads of the microengine it runs on. + * + * Local memory is used for per-channel RX state. + */ + +#define RX_THREAD_FREELIST_0 0x0030 +#define RBUF_ELEMENT_DONE 0x0044 + +#define CHANNEL_FLAGS *l$index0[0] +#define CHANNEL_FLAG_RECEIVING 1 +#define PACKET_LENGTH *l$index0[1] +#define PACKET_CHECKSUM *l$index0[2] +#define BUFFER_HANDLE *l$index0[3] +#define BUFFER_START *l$index0[4] +#define BUFFER_LENGTH *l$index0[5] + +#define CHANNEL_STATE_SIZE 24 // in bytes +#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size)) + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .sig mpacket_arrived + .reg add_to_rx_freelist + .reg read $rsw0, $rsw1 + .xfer_order $rsw0 $rsw1 + + .reg zero + + /* + * Initialise add_to_rx_freelist. + */ + .begin + .reg temp + .reg temp2 + + immed[add_to_rx_freelist, RX_THREAD_FREELIST_0] + immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))] + + local_csr_rd[ACTIVE_CTX_STS] + immed[temp, 0] + alu[temp2, temp, and, 0x1f] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20] + alu[temp2, temp, and, 0x80] + alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18] + .end + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_receive_loop#] + .end + + /* + * Initialise local memory. + */ + .begin + .reg addr + .reg temp + + immed[temp, 0] + init_local_mem_loop#: + alu_shf[addr, --, b, temp, <>8] + bne[abort_rswerr#] + .end + + /* + * Point local memory pointer to this channel's state area. + */ + .begin + .reg chanaddr + + alu[chanaddr, $rsw0, and, 0x1f] + alu_shf[chanaddr, --, b, chanaddr, < abort) If everything's + * okay, update the RECEIVING flag to reflect our new state. + */ + .begin + .reg temp + .reg eop + + #if CHANNEL_FLAG_RECEIVING != 1 + #error CHANNEL_FLAG_RECEIVING is not 1 + #endif + + alu_shf[temp, 1, and, $rsw0, >>15] + alu[temp, temp, xor, CHANNEL_FLAGS] + alu[--, temp, and, CHANNEL_FLAG_RECEIVING] + beq[abort_proterr#] + + alu_shf[eop, 1, and, $rsw0, >>14] + alu[CHANNEL_FLAGS, temp, xor, eop] + .end + + /* + * Copy the mpacket into the right spot, and in case of EOP, + * write back the descriptor and pass the packet on. + */ + .begin + .reg buffer_offset + .reg _packet_length + .reg _packet_checksum + .reg _buffer_handle + .reg _buffer_start + .reg _buffer_length + + /* + * Determine buffer_offset, _packet_length and + * _packet_checksum. + */ + .begin + .reg temp + + alu[--, 1, and, $rsw0, >>15] + beq[not_sop#] + + immed[PACKET_LENGTH, 0] + immed[PACKET_CHECKSUM, 0] + + not_sop#: + alu[buffer_offset, --, b, PACKET_LENGTH] + alu_shf[temp, 0xff, and, $rsw0, >>16] + alu[_packet_length, buffer_offset, +, temp] + alu[PACKET_LENGTH, --, b, _packet_length] + + immed[temp, 0xffff] + alu[temp, $rsw1, and, temp] + alu[_packet_checksum, PACKET_CHECKSUM, +, temp] + alu[PACKET_CHECKSUM, --, b, _packet_checksum] + .end + + /* + * Allocate buffer in case of SOP. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[skip_buffer_alloc#] + + .begin + .sig zzz + .reg read $stemp $stemp2 + .xfer_order $stemp $stemp2 + + rx_nobufs#: + scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz] + alu[_buffer_handle, --, b, $stemp] + beq[rx_nobufs#] + + sram[read, $stemp, _buffer_handle, 0, 2], + ctx_swap[zzz] + alu[_buffer_start, --, b, $stemp] + alu[_buffer_length, --, b, $stemp2] + .end + + skip_buffer_alloc#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig2] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Synchronise buffer state. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>15] + beq[copy_from_local_mem#] + + alu[BUFFER_HANDLE, --, b, _buffer_handle] + alu[BUFFER_START, --, b, _buffer_start] + alu[BUFFER_LENGTH, --, b, _buffer_length] + br[sync_state_done#] + + copy_from_local_mem#: + alu[_buffer_handle, --, b, BUFFER_HANDLE] + alu[_buffer_start, --, b, BUFFER_START] + alu[_buffer_length, --, b, BUFFER_LENGTH] + + sync_state_done#: + .end + +#if 0 + /* + * Debug buffer state management. + */ + .begin + .reg temp + + alu[temp, 1, and, $rsw0, >>14] + beq[no_poison#] + immed[BUFFER_HANDLE, 0xdead] + immed[BUFFER_START, 0xdead] + immed[BUFFER_LENGTH, 0xdead] + no_poison#: + + immed[temp, 0xdead] + alu[--, _buffer_handle, -, temp] + beq[state_corrupted#] + alu[--, _buffer_start, -, temp] + beq[state_corrupted#] + alu[--, _buffer_length, -, temp] + beq[state_corrupted#] + .end +#endif + + /* + * Check buffer length. + */ + .begin + alu[--, _buffer_length, -, _packet_length] + blo[buffer_overflow#] + .end + + /* + * Copy the mpacket and give back the RBUF element. + */ + .begin + .reg element + .reg xfer_size + .reg temp + .sig copy_sig + + alu_shf[element, 0x7f, and, $rsw0, >>24] + alu_shf[xfer_size, 0xff, and, $rsw0, >>16] + + alu[xfer_size, xfer_size, -, 1] + alu_shf[xfer_size, 0x10, or, xfer_size, >>3] + alu_shf[temp, 0x10, or, xfer_size, <<21] + alu_shf[temp, temp, or, element, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + + alu[temp, RBUF_ELEMENT_DONE, or, element, <<16] + msf[fast_wr, --, temp, 0] + .end + + /* + * If EOP, write back the packet descriptor. + */ + .begin + .reg write $stemp $stemp2 + .xfer_order $stemp $stemp2 + .sig zzz + + alu_shf[--, 1, and, $rsw0, >>14] + beq[no_writeback#] + + alu[$stemp, $rsw0, and, 0x1f] + alu[$stemp2, --, b, _packet_length] + sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz] + + no_writeback#: + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If EOP, put the buffer back onto the scratch ring. + */ + .begin + .reg write $stemp + .sig zzz + + br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#] + + alu_shf[--, 1, and, $rsw0, >>14] + beq[mpacket_receive_loop#] + + alu[--, 1, and, $rsw0, >>10] + bne[rxerr#] + + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_receive_loop#] + + rxerr#: + alu[$stemp, --, b, _buffer_handle] + scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz] + br[mpacket_receive_loop#] + .end + .end + + +abort_rswerr#: + halt + +abort_proterr#: + halt + +state_corrupted#: + halt + +buffer_overflow#: + halt + +rx_done_ring_overflow#: + halt + + diff --git a/drivers/net/ixp2000/ixp2400_rx.ucode b/drivers/net/ixp2000/ixp2400_rx.ucode new file mode 100644 index 00000000000..e8aee2f81aa --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_rx.ucode @@ -0,0 +1,130 @@ +static struct ixp2000_uengine_code ixp2400_rx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 109, + .insns = (u8 []) { + 0xf0, 0x00, 0x0c, 0xc0, 0x05, + 0xf4, 0x44, 0x0c, 0x00, 0x05, + 0xfc, 0x04, 0x4c, 0x00, 0x00, + 0xf0, 0x00, 0x00, 0x3b, 0x00, + 0xb4, 0x40, 0xf0, 0x3b, 0x1f, + 0x8a, 0xc0, 0x50, 0x3e, 0x05, + 0xb4, 0x40, 0xf0, 0x3b, 0x80, + 0x9a, 0xe0, 0x00, 0x3e, 0x05, + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x05, 0xc0, 0x00, 0x11, + 0xf0, 0x00, 0x00, 0x0f, 0x00, + 0x91, 0xb0, 0x20, 0x0e, 0x00, + 0xfc, 0x06, 0x60, 0x0b, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x00, + 0xb0, 0xc0, 0x30, 0x0f, 0x01, + 0xa4, 0x70, 0x00, 0x0f, 0x20, + 0xd8, 0x02, 0xc0, 0x01, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0x3d, 0x00, 0x04, 0x03, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x10, + 0x84, 0x82, 0x02, 0x01, 0x3b, + 0xd8, 0x1a, 0x00, 0x01, 0x01, + 0xb4, 0x00, 0x8c, 0x7d, 0x80, + 0x91, 0xb0, 0x80, 0x22, 0x00, + 0xfc, 0x06, 0x60, 0x23, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0xf0, 0x00, 0x0c, 0x03, 0x00, + 0x94, 0xf0, 0x92, 0x01, 0x21, + 0xac, 0x40, 0x60, 0x26, 0x00, + 0xa4, 0x30, 0x0c, 0x04, 0x06, + 0xd8, 0x1a, 0x40, 0x01, 0x00, + 0x94, 0xe0, 0xa2, 0x01, 0x21, + 0xac, 0x20, 0x00, 0x28, 0x06, + 0x84, 0xf2, 0x02, 0x01, 0x21, + 0xd8, 0x0b, 0x40, 0x01, 0x00, + 0xf0, 0x00, 0x0c, 0x02, 0x01, + 0xf0, 0x00, 0x0c, 0x02, 0x02, + 0xa0, 0x00, 0x08, 0x04, 0x00, + 0x95, 0x00, 0xc6, 0x01, 0xff, + 0xa0, 0x80, 0x10, 0x30, 0x00, + 0xa0, 0x60, 0x1c, 0x00, 0x01, + 0xf0, 0x0f, 0xf0, 0x33, 0xff, + 0xb4, 0x00, 0xc0, 0x31, 0x81, + 0xb0, 0x80, 0xb0, 0x32, 0x02, + 0xa0, 0x20, 0x20, 0x2c, 0x00, + 0x94, 0xf0, 0xd2, 0x01, 0x21, + 0xd8, 0x0f, 0x40, 0x01, 0x00, + 0x19, 0x40, 0x10, 0x04, 0x20, + 0xa0, 0x00, 0x26, 0x04, 0x00, + 0xd8, 0x0d, 0xc0, 0x01, 0x00, + 0x00, 0x42, 0x10, 0x80, 0x02, + 0xb0, 0x00, 0x46, 0x04, 0x00, + 0xb0, 0x00, 0x56, 0x08, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0x84, 0xf0, 0x32, 0x01, 0x21, + 0xd8, 0x11, 0x40, 0x01, 0x00, + 0xa0, 0x60, 0x3c, 0x00, 0x02, + 0xa0, 0x20, 0x40, 0x10, 0x00, + 0xa0, 0x20, 0x50, 0x14, 0x00, + 0xd8, 0x12, 0x00, 0x00, 0x18, + 0xa0, 0x00, 0x28, 0x0c, 0x00, + 0xb0, 0x00, 0x48, 0x10, 0x00, + 0xb0, 0x00, 0x58, 0x14, 0x00, + 0xaa, 0xf0, 0x00, 0x14, 0x01, + 0xd8, 0x1a, 0xc0, 0x01, 0x05, + 0x85, 0x80, 0x42, 0x01, 0xff, + 0x95, 0x00, 0x66, 0x01, 0xff, + 0xba, 0xc0, 0x60, 0x1b, 0x01, + 0x9a, 0x30, 0x60, 0x19, 0x30, + 0x9a, 0xb0, 0x70, 0x1a, 0x30, + 0x9b, 0x50, 0x78, 0x1e, 0x04, + 0x8a, 0xe2, 0x08, 0x1e, 0x21, + 0x6a, 0x4e, 0x00, 0x13, 0x00, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9b, 0x00, 0x7a, 0x92, 0x04, + 0x3d, 0x00, 0x04, 0x1f, 0x20, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x16, 0x80, 0x01, 0x00, + 0xa4, 0x18, 0x0c, 0x7d, 0x80, + 0xa0, 0x58, 0x1c, 0x00, 0x01, + 0x01, 0x42, 0x00, 0xa0, 0x02, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xd8, 0x1b, 0x00, 0xc2, 0x14, + 0x84, 0xe2, 0x02, 0x01, 0x21, + 0xd8, 0x05, 0xc0, 0x01, 0x00, + 0x84, 0xa2, 0x02, 0x01, 0x21, + 0xd8, 0x19, 0x40, 0x01, 0x01, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x24, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xa0, 0x58, 0x0c, 0x00, 0x02, + 0x1a, 0x40, 0x00, 0x04, 0x20, + 0xd8, 0x05, 0xc0, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ixp2000/ixp2400_tx.uc b/drivers/net/ixp2000/ixp2400_tx.uc new file mode 100644 index 00000000000..d090d1884fb --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_tx.uc @@ -0,0 +1,272 @@ +/* + * TX ucode for the Intel IXP2400 in POS-PHY mode. + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Assumptions made in this code: + * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where + * only one TBUF partition is used. This includes, for example, + * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This + * is not an exhaustive list.) + * - The TBUF uses 64-byte mpackets. + * - TX descriptors reside in SRAM, and have the following format: + * struct tx_desc + * { + * // to uengine + * u32 buf_phys_addr; + * u32 pkt_length; + * u32 channel; + * }; + * - Packet data resides in DRAM. + * - Packet buffer addresses are 8-byte aligned. + * - Scratch ring 2 is tx_pending. + * - Scratch ring 3 is tx_done, and has status condition 'full'. + * - This code is run on all eight threads of the microengine it runs on. + */ + +#define TX_SEQUENCE_0 0x0060 +#define TBUF_CTRL 0x1800 + +#define PARTITION_SIZE 128 +#define PARTITION_THRESH 96 + + + .sig volatile sig1 + .sig volatile sig2 + .sig volatile sig3 + + .reg @old_tx_seq_0 + .reg @mpkts_in_flight + .reg @next_tbuf_mpacket + + .reg @buffer_handle + .reg @buffer_start + .reg @packet_length + .reg @channel + .reg @packet_offset + + .reg zero + + immed[zero, 0] + + /* + * Skip context 0 initialisation? + */ + .begin + br!=ctx[0, mpacket_tx_loop#] + .end + + /* + * Wait until all pending TBUF elements have been transmitted. + */ + .begin + .reg read $tx + .sig zzz + + loop_empty#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + alu_shf[--, --, b, $tx, >>31] + beq[loop_empty#] + + alu[@old_tx_seq_0, --, b, $tx] + .end + + immed[@mpkts_in_flight, 0] + alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)] + + immed[@buffer_handle, 0] + + /* + * Initialise signal pipeline. + */ + .begin + local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] + .set_sig sig1 + + local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] + .set_sig sig2 + + local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] + .set_sig sig3 + .end + +mpacket_tx_loop#: + .begin + .reg tbuf_element_index + .reg buffer_handle + .reg sop_eop + .reg packet_data + .reg channel + .reg mpacket_size + + /* + * If there is no packet currently being transmitted, + * dequeue the next TX descriptor, and fetch the buffer + * address, packet length and destination channel number. + */ + .begin + .reg read $stemp $stemp2 $stemp3 + .xfer_order $stemp $stemp2 $stemp3 + .sig zzz + + ctx_arb[sig1] + + alu[--, --, b, @buffer_handle] + bne[already_got_packet#] + + tx_nobufs#: + scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz] + alu[@buffer_handle, --, b, $stemp] + beq[tx_nobufs#] + + sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz] + alu[@buffer_start, --, b, $stemp] + alu[@packet_length, --, b, $stemp2] + beq[zero_byte_packet#] + alu[@channel, --, b, $stemp3] + immed[@packet_offset, 0] + + already_got_packet#: + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] + .end + + /* + * Determine tbuf element index, SOP/EOP flags, mpacket + * offset and mpacket size and cache buffer_handle and + * channel number. + */ + .begin + alu[tbuf_element_index, --, b, @next_tbuf_mpacket] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1] + alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and, + (PARTITION_SIZE - 1)] + + alu[buffer_handle, --, b, @buffer_handle] + immed[@buffer_handle, 0] + + immed[sop_eop, 1] + + alu[packet_data, --, b, @packet_offset] + bne[no_sop#] + alu[sop_eop, sop_eop, or, 2] + no_sop#: + alu[packet_data, packet_data, +, @buffer_start] + + alu[channel, --, b, @channel] + + alu[mpacket_size, @packet_length, -, @packet_offset] + alu[--, 64, -, mpacket_size] + bhs[eop#] + alu[@buffer_handle, --, b, buffer_handle] + immed[mpacket_size, 64] + alu[sop_eop, sop_eop, and, 2] + eop#: + + alu[@packet_offset, @packet_offset, +, mpacket_size] + .end + + /* + * Wait until there's enough space in the TBUF. + */ + .begin + .reg read $tx + .reg temp + .sig zzz + + ctx_arb[sig2] + + br[test_space#] + + loop_space#: + msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] + + alu[temp, $tx, -, @old_tx_seq_0] + alu[temp, temp, and, 0xff] + alu[@mpkts_in_flight, @mpkts_in_flight, -, temp] + + alu[@old_tx_seq_0, --, b, $tx] + + test_space#: + alu[--, PARTITION_THRESH, -, @mpkts_in_flight] + blo[loop_space#] + + alu[@mpkts_in_flight, @mpkts_in_flight, +, 1] + + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] + .end + + /* + * Copy the packet data to the TBUF. + */ + .begin + .reg temp + .sig copy_sig + + alu[temp, mpacket_size, -, 1] + alu_shf[temp, 0x10, or, temp, >>3] + alu_shf[temp, 0x10, or, temp, <<21] + alu_shf[temp, temp, or, tbuf_element_index, <<11] + alu_shf[--, temp, or, 1, <<18] + + dram[tbuf_wr, --, packet_data, 0, max_8], + indirect_ref, sig_done[copy_sig] + ctx_arb[copy_sig] + .end + + /* + * Mark TBUF element as ready-to-be-transmitted. + */ + .begin + .reg write $tsw $tsw2 + .xfer_order $tsw $tsw2 + .reg temp + .sig zzz + + alu_shf[temp, channel, or, mpacket_size, <<24] + alu_shf[$tsw, temp, or, sop_eop, <<8] + immed[$tsw2, 0] + + immed[temp, TBUF_CTRL] + alu_shf[temp, temp, or, tbuf_element_index, <<3] + msf[write, $tsw, temp, 0, 2], ctx_swap[zzz] + .end + + /* + * Resynchronise. + */ + .begin + ctx_arb[sig3] + local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] + .end + + /* + * If this was an EOP mpacket, recycle the TX buffer + * and signal the host. + */ + .begin + .reg write $stemp + .sig zzz + + alu[--, sop_eop, and, 1] + beq[mpacket_tx_loop#] + + tx_done_ring_full#: + br_inp_state[SCR_Ring3_Status, tx_done_ring_full#] + + alu[$stemp, --, b, buffer_handle] + scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz] + cap[fast_wr, 0, XSCALE_INT_A] + br[mpacket_tx_loop#] + .end + .end + + +zero_byte_packet#: + halt + + diff --git a/drivers/net/ixp2000/ixp2400_tx.ucode b/drivers/net/ixp2000/ixp2400_tx.ucode new file mode 100644 index 00000000000..a433e24b0a5 --- /dev/null +++ b/drivers/net/ixp2000/ixp2400_tx.ucode @@ -0,0 +1,98 @@ +static struct ixp2000_uengine_code ixp2400_tx = +{ + .cpu_model_bitmask = 0x000003fe, + .cpu_min_revision = 0, + .cpu_max_revision = 255, + + .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | + IXP2000_UENGINE_PRN_UPDATE_EVERY | + IXP2000_UENGINE_NN_FROM_PREVIOUS | + IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | + IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | + IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, + + .initial_reg_values = (struct ixp2000_reg_value []) { + { -1, -1 } + }, + + .num_insns = 77, + .insns = (u8 []) { + 0xf0, 0x00, 0x00, 0x07, 0x00, + 0xd8, 0x03, 0x00, 0x00, 0x11, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0x81, 0xf2, 0x02, 0x01, 0x00, + 0xd8, 0x00, 0x80, 0x01, 0x00, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0x80, + 0xb4, 0x49, 0x02, 0x03, 0x7f, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xfc, 0x10, 0xac, 0x23, 0x08, + 0xfc, 0x10, 0xac, 0x43, 0x10, + 0xfc, 0x10, 0xac, 0x63, 0x18, + 0xe0, 0x00, 0x00, 0x00, 0x02, + 0xa0, 0x30, 0x02, 0x80, 0x00, + 0xd8, 0x06, 0x00, 0x01, 0x01, + 0x19, 0x40, 0x00, 0x04, 0x28, + 0xb0, 0x0a, 0x06, 0x00, 0x00, + 0xd8, 0x03, 0xc0, 0x01, 0x00, + 0x00, 0x44, 0x00, 0x80, 0x80, + 0xa0, 0x09, 0x06, 0x00, 0x00, + 0xb0, 0x0b, 0x06, 0x04, 0x00, + 0xd8, 0x13, 0x00, 0x01, 0x00, + 0xb0, 0x0c, 0x06, 0x08, 0x00, + 0xf0, 0x00, 0x0c, 0x00, 0xa0, + 0xfc, 0x10, 0xae, 0x23, 0x88, + 0xa0, 0x00, 0x12, 0x40, 0x00, + 0xb0, 0xc9, 0x02, 0x43, 0x01, + 0xb4, 0x49, 0x02, 0x43, 0x7f, + 0xb0, 0x00, 0x22, 0x80, 0x00, + 0xf0, 0x00, 0x02, 0x83, 0x00, + 0xf0, 0x00, 0x0c, 0x04, 0x02, + 0xb0, 0x40, 0x6c, 0x00, 0xa0, + 0xd8, 0x08, 0x80, 0x01, 0x01, + 0xaa, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0xc0, 0x30, 0x18, 0x90, + 0xa0, 0x00, 0x43, 0x00, 0x00, + 0xba, 0xc0, 0x32, 0xc0, 0xa0, + 0xaa, 0xb0, 0x00, 0x0f, 0x40, + 0xd8, 0x0a, 0x80, 0x01, 0x04, + 0xb0, 0x0a, 0x00, 0x08, 0x00, + 0xf0, 0x00, 0x00, 0x0f, 0x40, + 0xa4, 0x00, 0x2c, 0x08, 0x02, + 0xa0, 0x8a, 0x00, 0x0c, 0xa0, + 0xe0, 0x00, 0x00, 0x00, 0x04, + 0xd8, 0x0c, 0x80, 0x00, 0x18, + 0x3c, 0x40, 0x00, 0x04, 0xe0, + 0xba, 0x80, 0x42, 0x01, 0x80, + 0xb4, 0x40, 0x40, 0x13, 0xff, + 0xaa, 0x88, 0x00, 0x10, 0x80, + 0xb0, 0x08, 0x06, 0x00, 0x00, + 0xaa, 0xf0, 0x0d, 0x80, 0x80, + 0xd8, 0x0b, 0x40, 0x01, 0x05, + 0xa0, 0x88, 0x0c, 0x04, 0x80, + 0xfc, 0x10, 0xae, 0x43, 0x90, + 0xba, 0xc0, 0x50, 0x0f, 0x01, + 0x9a, 0x30, 0x50, 0x15, 0x30, + 0x9a, 0xb0, 0x50, 0x16, 0x30, + 0x9b, 0x50, 0x58, 0x16, 0x01, + 0x8a, 0xe2, 0x08, 0x16, 0x21, + 0x6b, 0x4e, 0x00, 0x83, 0x03, + 0xe0, 0x00, 0x00, 0x00, 0x30, + 0x9a, 0x80, 0x70, 0x0e, 0x04, + 0x8b, 0x88, 0x08, 0x1e, 0x02, + 0xf0, 0x00, 0x0c, 0x01, 0x81, + 0xf0, 0x01, 0x80, 0x1f, 0x00, + 0x9b, 0xd0, 0x78, 0x1e, 0x01, + 0x3d, 0x42, 0x00, 0x1c, 0x20, + 0xe0, 0x00, 0x00, 0x00, 0x08, + 0xfc, 0x10, 0xae, 0x63, 0x98, + 0xa4, 0x30, 0x0c, 0x04, 0x02, + 0xd8, 0x03, 0x00, 0x01, 0x00, + 0xd8, 0x11, 0xc1, 0x42, 0x14, + 0xa0, 0x18, 0x00, 0x08, 0x00, + 0x1a, 0x40, 0x00, 0x04, 0x2c, + 0x33, 0x00, 0x01, 0x2f, 0x20, + 0xd8, 0x03, 0x00, 0x00, 0x18, + 0xe0, 0x00, 0x02, 0x00, 0x00, + } +}; diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c new file mode 100644 index 00000000000..216aad1911e --- /dev/null +++ b/drivers/net/ixp2000/ixpdev.c @@ -0,0 +1,404 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ixp2400_rx.ucode" +#include "ixp2400_tx.ucode" +#include "ixpdev_priv.h" +#include "ixpdev.h" + +static int nds_count; +static struct net_device **nds; +static int nds_open; +static void (*set_port_admin_status)(int port, int up); + +static struct ixpdev_rx_desc * const rx_desc = + (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE); +static struct ixpdev_tx_desc * const tx_desc = + (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE); +static int tx_pointer; + + +static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + struct ixpdev_tx_desc *desc; + int entry; + + if (unlikely(skb->len > PAGE_SIZE)) { + /* @@@ Count drops. */ + dev_kfree_skb(skb); + return 0; + } + + entry = tx_pointer; + tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT; + + desc = tx_desc + entry; + desc->pkt_length = skb->len; + desc->channel = ip->channel; + + skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr)); + dev_kfree_skb(skb); + + ixp2000_reg_write(RING_TX_PENDING, + TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc))); + + dev->trans_start = jiffies; + + local_irq_disable(); + ip->tx_queue_entries++; + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + netif_stop_queue(dev); + local_irq_enable(); + + return 0; +} + + +static int ixpdev_rx(struct net_device *dev, int *budget) +{ + while (*budget > 0) { + struct ixpdev_rx_desc *desc; + struct sk_buff *skb; + void *buf; + u32 _desc; + + _desc = ixp2000_reg_read(RING_RX_DONE); + if (_desc == 0) + return 0; + + desc = rx_desc + + ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc)); + buf = phys_to_virt(desc->buf_addr); + + if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) { + printk(KERN_ERR "ixp2000: rx err, length %d\n", + desc->pkt_length); + goto err; + } + + if (desc->channel < 0 || desc->channel >= nds_count) { + printk(KERN_ERR "ixp2000: rx err, channel %d\n", + desc->channel); + goto err; + } + + /* @@@ Make FCS stripping configurable. */ + desc->pkt_length -= 4; + + if (unlikely(!netif_running(nds[desc->channel]))) + goto err; + + skb = dev_alloc_skb(desc->pkt_length + 2); + if (likely(skb != NULL)) { + skb->dev = nds[desc->channel]; + skb_reserve(skb, 2); + eth_copy_and_sum(skb, buf, desc->pkt_length, 0); + skb_put(skb, desc->pkt_length); + skb->protocol = eth_type_trans(skb, skb->dev); + + skb->dev->last_rx = jiffies; + + netif_receive_skb(skb); + } + +err: + ixp2000_reg_write(RING_RX_PENDING, _desc); + dev->quota--; + (*budget)--; + } + + return 1; +} + +/* dev always points to nds[0]. */ +static int ixpdev_poll(struct net_device *dev, int *budget) +{ + /* @@@ Have to stop polling when nds[0] is administratively + * downed while we are polling. */ + do { + ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff); + + if (ixpdev_rx(dev, budget)) + return 1; + } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff); + + netif_rx_complete(dev); + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff); + + return 0; +} + +/* @@@ Ugly hack. */ +static inline int netif_rx_schedule_prep_notup(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); +} + +static void ixpdev_tx_complete(void) +{ + int channel; + u32 wake; + + wake = 0; + while (1) { + struct ixpdev_priv *ip; + u32 desc; + int entry; + + desc = ixp2000_reg_read(RING_TX_DONE); + if (desc == 0) + break; + + /* @@@ Check whether entries come back in order. */ + entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc); + channel = tx_desc[entry].channel; + + if (channel < 0 || channel >= nds_count) { + printk(KERN_ERR "ixp2000: txcomp channel index " + "out of bounds (%d, %.8i, %d)\n", + channel, (unsigned int)desc, entry); + continue; + } + + ip = netdev_priv(nds[channel]); + if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) + wake |= 1 << channel; + ip->tx_queue_entries--; + } + + for (channel = 0; wake != 0; channel++) { + if (wake & (1 << channel)) { + netif_wake_queue(nds[channel]); + wake &= ~(1 << channel); + } + } +} + +static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 status; + + status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0); + if (status == 0) + return IRQ_NONE; + + /* + * Any of the eight receive units signaled RX? + */ + if (status & 0x00ff) { + ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); + if (likely(netif_rx_schedule_prep_notup(nds[0]))) { + __netif_rx_schedule(nds[0]); + } else { + printk(KERN_CRIT "ixp2000: irq while polling!!\n"); + } + } + + /* + * Any of the eight transmit units signaled TXdone? + */ + if (status & 0xff00) { + ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00); + ixpdev_tx_complete(); + } + + return IRQ_HANDLED; +} + +static int ixpdev_open(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + int err; + + if (!nds_open++) { + err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt, + SA_SHIRQ, "ixp2000_eth", nds); + if (err) { + nds_open--; + return err; + } + + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff); + } + + set_port_admin_status(ip->channel, 1); + netif_start_queue(dev); + + return 0; +} + +static int ixpdev_close(struct net_device *dev) +{ + struct ixpdev_priv *ip = netdev_priv(dev); + + netif_stop_queue(dev); + set_port_admin_status(ip->channel, 0); + + if (!--nds_open) { + ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff); + free_irq(IRQ_IXP2000_THDA0, nds); + } + + return 0; +} + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv) +{ + struct net_device *dev; + struct ixpdev_priv *ip; + + dev = alloc_etherdev(sizeof_priv); + if (dev == NULL) + return NULL; + + dev->hard_start_xmit = ixpdev_xmit; + dev->poll = ixpdev_poll; + dev->open = ixpdev_open; + dev->stop = ixpdev_close; + + dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; + dev->weight = 64; + + ip = netdev_priv(dev); + ip->channel = channel; + ip->tx_queue_entries = 0; + + return dev; +} + +int ixpdev_init(int __nds_count, struct net_device **__nds, + void (*__set_port_admin_status)(int port, int up)) +{ + int i; + int err; + + if (RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192) { + static void __too_many_rx_or_tx_buffers(void); + __too_many_rx_or_tx_buffers(); + } + + nds_count = __nds_count; + nds = __nds; + set_port_admin_status = __set_port_admin_status; + + for (i = 0; i < nds_count; i++) { + err = register_netdev(nds[i]); + if (err) { + while (--i >= 0) + unregister_netdev(nds[i]); + goto err_out; + } + } + + for (i = 0; i < RX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + goto err_unregister; + } + rx_desc[i].buf_addr = virt_to_phys(buf); + rx_desc[i].buf_length = PAGE_SIZE; + } + + /* @@@ Maybe we shouldn't be preallocating TX buffers. */ + for (i = 0; i < TX_BUF_COUNT; i++) { + void *buf; + + buf = (void *)get_zeroed_page(GFP_KERNEL); + if (buf == NULL) { + err = -ENOMEM; + while (--i >= 0) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + goto err_free_rx; + } + tx_desc[i].buf_addr = virt_to_phys(buf); + } + + /* 256 entries, ring status set means 'empty', base address 0x0000. */ + ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000); + ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0400. */ + ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400); + ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000); + + for (i = 0; i < RX_BUF_COUNT; i++) { + ixp2000_reg_write(RING_RX_PENDING, + RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc))); + } + + ixp2000_uengine_load(0, &ixp2400_rx); + ixp2000_uengine_start_contexts(0, 0xff); + + + /* 256 entries, ring status set means 'empty', base address 0x0800. */ + ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800); + ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000); + + /* 256 entries, ring status set means 'full', base address 0x0c00. */ + ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00); + ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000); + ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000); + + ixp2000_uengine_load(1, &ixp2400_tx); + ixp2000_uengine_start_contexts(1, 0xff); + + return 0; + +err_free_rx: + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + +err_unregister: + for (i = 0; i < nds_count; i++) + unregister_netdev(nds[i]); + +err_out: + return err; +} + +void ixpdev_deinit(void) +{ + int i; + + /* @@@ Flush out pending packets. */ + + ixp2000_uengine_stop_contexts(1, 0xff); + ixp2000_uengine_stop_contexts(0, 0xff); + ixp2000_uengine_reset(0x3); + + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + + for (i = 0; i < RX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); + + for (i = 0; i < nds_count; i++) + unregister_netdev(nds[i]); +} diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ixp2000/ixpdev.h new file mode 100644 index 00000000000..bd686cb6305 --- /dev/null +++ b/drivers/net/ixp2000/ixpdev.h @@ -0,0 +1,27 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_H +#define __IXPDEV_H + +struct ixpdev_priv +{ + int channel; + int tx_queue_entries; +}; + +struct net_device *ixpdev_alloc(int channel, int sizeof_priv); +int ixpdev_init(int num_ports, struct net_device **nds, + void (*set_port_admin_status)(int port, int up)); +void ixpdev_deinit(void); + + +#endif diff --git a/drivers/net/ixp2000/ixpdev_priv.h b/drivers/net/ixp2000/ixpdev_priv.h new file mode 100644 index 00000000000..86aa08ea0c3 --- /dev/null +++ b/drivers/net/ixp2000/ixpdev_priv.h @@ -0,0 +1,57 @@ +/* + * IXP2000 MSF network device driver + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __IXPDEV_PRIV_H +#define __IXPDEV_PRIV_H + +#define RX_BUF_DESC_BASE 0x00001000 +#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc))) +#define TX_BUF_DESC_BASE 0x00002000 +#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc))) +#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4) + +#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE) +#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4)) +#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8)) +#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12)) + +#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x))) +#define RING_RX_PENDING_BASE SCRATCH_REG(0x00) +#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04) +#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08) +#define RING_RX_DONE_BASE SCRATCH_REG(0x10) +#define RING_RX_DONE_HEAD SCRATCH_REG(0x14) +#define RING_RX_DONE_TAIL SCRATCH_REG(0x18) +#define RING_TX_PENDING_BASE SCRATCH_REG(0x20) +#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24) +#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28) +#define RING_TX_DONE_BASE SCRATCH_REG(0x30) +#define RING_TX_DONE_HEAD SCRATCH_REG(0x34) +#define RING_TX_DONE_TAIL SCRATCH_REG(0x38) + +struct ixpdev_rx_desc +{ + u32 buf_addr; + u32 buf_length; + u32 channel; + u32 pkt_length; +}; + +struct ixpdev_tx_desc +{ + u32 buf_addr; + u32 pkt_length; + u32 channel; + u32 unused; +}; + + +#endif diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c new file mode 100644 index 00000000000..cf0681fb127 --- /dev/null +++ b/drivers/net/ixp2000/pm3386.c @@ -0,0 +1,304 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +/* + * Read from register 'reg' of PM3386 device 'pm'. + */ +static u16 pm3386_reg_read(int pm, int reg) +{ + void *_reg; + u16 value; + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + value = *((volatile u16 *)(_reg + (reg << 1))); + +// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value); + + return value; +} + +/* + * Write to register 'reg' of PM3386 device 'pm', and perform + * a readback from the identification register. + */ +static void pm3386_reg_write(int pm, int reg, u16 value) +{ + void *_reg; + u16 dummy; + +// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value); + + _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; + if (pm == 1) + _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; + + *((volatile u16 *)(_reg + (reg << 1))) = value; + + dummy = *((volatile u16 *)_reg); + __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); +} + +/* + * Read from port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static u16 pm3386_port_reg_read(int port, int _reg, int spacing) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + return pm3386_reg_read(port >> 1, reg); +} + +/* + * Write to port 'port' register 'reg', where the registers + * for the different ports are 'spacing' registers apart. + */ +static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) +{ + int reg; + + reg = _reg; + if (port & 1) + reg += spacing; + + pm3386_reg_write(port >> 1, reg, value); +} + + +void pm3386_reset(void) +{ + /* @@@ Implement me. */ +} + +static u16 swaph(u16 x) +{ + return ((x << 8) | (x >> 8)) & 0xffff; +} + +void pm3386_init_port(int port) +{ + int pm = port >> 1; + + /* + * Work around ENP2611 bootloader programming MAC address + * in reverse. + */ + if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 && + (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) { + u16 temp[3]; + + temp[0] = pm3386_port_reg_read(port, 0x308, 0x100); + temp[1] = pm3386_port_reg_read(port, 0x309, 0x100); + temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100); + pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2])); + pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1])); + pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0])); + } + + /* + * Initialise narrowbanding mode. See application note 2010486 + * for more information. (@@@ We also need to issue a reset + * when ROOL or DOOL are detected.) + */ + pm3386_port_reg_write(port, 0x708, 0x10, 0xd055); + udelay(500); + pm3386_port_reg_write(port, 0x708, 0x10, 0x5055); + + /* + * SPI-3 ingress block. Set 64 bytes SPI-3 burst size + * towards SPI-3 bridge. + */ + pm3386_port_reg_write(port, 0x122, 0x20, 0x0002); + + /* + * Enable ingress protocol checking, and soft reset the + * SPI-3 ingress block. + */ + pm3386_reg_write(pm, 0x103, 0x0003); + while (!(pm3386_reg_read(pm, 0x103) & 0x80)) + ; + + /* + * SPI-3 egress block. Gather 12288 bytes of the current + * packet in the TX fifo before initiating transmit on the + * SERDES interface. (Prevents TX underflows.) + */ + pm3386_port_reg_write(port, 0x221, 0x20, 0x0007); + + /* + * Enforce odd parity from the SPI-3 bridge, and soft reset + * the SPI-3 egress block. + */ + pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1))); + while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c) + ; + + /* + * EGMAC block. Set this channels to reject long preambles, + * not send or transmit PAUSE frames, enable preamble checking, + * disable frame length checking, enable FCS appending, enable + * TX frame padding. + */ + pm3386_port_reg_write(port, 0x302, 0x100, 0x0113); + + /* + * Soft reset the EGMAC block. + */ + pm3386_port_reg_write(port, 0x301, 0x100, 0x8000); + udelay(10); + pm3386_port_reg_write(port, 0x301, 0x100, 0x0000); + udelay(10); + + /* + * Auto-sense autonegotiation status. + */ + pm3386_port_reg_write(port, 0x306, 0x100, 0x0100); + + /* + * Allow reception of jumbo frames. + */ + pm3386_port_reg_write(port, 0x310, 0x100, 9018); + + /* + * Allow transmission of jumbo frames. + */ + pm3386_port_reg_write(port, 0x336, 0x100, 9018); + + /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */ + + /* + * Set autonegotiation parameters to 'no PAUSE, full duplex.' + */ + pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020); + udelay(10); + + /* + * Enable and restart autonegotiation. + */ + pm3386_port_reg_write(port, 0x318, 0x100, 0x0003); + udelay(1000); + pm3386_port_reg_write(port, 0x318, 0x100, 0x0002); + udelay(10); +} + +void pm3386_get_mac(int port, u8 *mac) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x308, 0x100); + mac[0] = temp & 0xff; + mac[1] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x309, 0x100); + mac[2] = temp & 0xff; + mac[3] = (temp >> 8) & 0xff; + + temp = pm3386_port_reg_read(port, 0x30a, 0x100); + mac[4] = temp & 0xff; + mac[5] = (temp >> 8) & 0xff; +} + +static u32 pm3386_get_stat(int port, u16 base) +{ + u32 value; + + value = pm3386_port_reg_read(port, base, 0x100); + value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16; + + return value; +} + +void pm3386_get_stats(int port, struct net_device_stats *stats) +{ + /* + * Snapshot statistics counters. + */ + pm3386_port_reg_write(port, 0x500, 0x100, 0x0001); + while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001) + ; + + memset(stats, 0, sizeof(stats)); + + stats->rx_packets = pm3386_get_stat(port, 0x510); + stats->tx_packets = pm3386_get_stat(port, 0x590); + stats->rx_bytes = pm3386_get_stat(port, 0x514); + stats->tx_bytes = pm3386_get_stat(port, 0x594); + /* @@@ Add other stats. */ +} + +int pm3386_is_link_up(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + temp = pm3386_port_reg_read(port, 0x31a, 0x100); + + return !!(temp & 0x0002); +} + +void pm3386_enable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x1000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); + + udelay(10); +} + +void pm3386_disable_rx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xefff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); + + udelay(10); +} + +void pm3386_enable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp |= 0x4000; + pm3386_port_reg_write(port, 0x303, 0x100, temp); + + udelay(10); +} + +void pm3386_disable_tx(int port) +{ + u16 temp; + + temp = pm3386_port_reg_read(port, 0x303, 0x100); + temp &= 0xbfff; + pm3386_port_reg_write(port, 0x303, 0x100, temp); + + udelay(10); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h new file mode 100644 index 00000000000..55ecb183421 --- /dev/null +++ b/drivers/net/ixp2000/pm3386.h @@ -0,0 +1,26 @@ +/* + * Helper functions for the PM3386s on the Radisys ENP2611 + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PM3386_H +#define __PM3386_H + +void pm3386_reset(void); +void pm3386_init_port(int port); +void pm3386_get_mac(int port, u8 *mac); +void pm3386_get_stats(int port, struct net_device_stats *stats); +int pm3386_is_link_up(int port); +void pm3386_enable_rx(int port); +void pm3386_disable_rx(int port); +void pm3386_enable_tx(int port); +void pm3386_disable_tx(int port); + + +#endif -- cgit v1.2.3-70-g09d2 From e98fc4aae10b925ad5aa739c483abf78d80b66db Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 8 Nov 2005 15:45:02 -0500 Subject: [PATCH] e1000: avoid leak when e1000_setup_loopback_test fails In e1000_loopback_test, make sure to call e1000_free_desc_rings if e1000_setup_loopback_test fails. Currently in that case it will not get called, causing a leak. Signed-off-by: John W. Linville --- drivers/net/e1000/e1000_ethtool.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8eae8ba27e8..8584e9382c2 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1440,9 +1440,11 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, uint64_t *data) { if((*data = e1000_setup_desc_rings(adapter))) goto err_loopback; - if((*data = e1000_setup_loopback_test(adapter))) goto err_loopback; + if((*data = e1000_setup_loopback_test(adapter))) + goto err_loopback_setup; *data = e1000_run_loopback_test(adapter); e1000_loopback_cleanup(adapter); +err_loopback_setup: e1000_free_desc_rings(adapter); err_loopback: return *data; -- cgit v1.2.3-70-g09d2 From 6b27adb607282addcfe2707783dfcc28ba3a753b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 8 Nov 2005 15:59:30 -0500 Subject: [PATCH] e1000: zero-out pointers in e1000_free_desc_rings In e1000_free_desc_rings, zero-out pointers after the memory they point to is freed. The test rings are static and get re-used, and failures during subsequent test setups can cause e1000_free_desc_rings to get called with dirty pointers. Dirty pointers can cause oopses or crashes... Signed-off-by: John W. Linville --- drivers/net/e1000/e1000_ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8584e9382c2..8646914964e 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -960,13 +960,21 @@ e1000_free_desc_rings(struct e1000_adapter *adapter) } } - if(txdr->desc) + if(txdr->desc) { pci_free_consistent(pdev, txdr->size, txdr->desc, txdr->dma); - if(rxdr->desc) + txdr->desc = NULL; + } + if(rxdr->desc) { pci_free_consistent(pdev, rxdr->size, rxdr->desc, rxdr->dma); + rxdr->desc = NULL; + } kfree(txdr->buffer_info); + txdr->buffer_info = NULL; + kfree(rxdr->buffer_info); + rxdr->buffer_info = NULL; + return; } -- cgit v1.2.3-70-g09d2 From 656563e32c3f1dfdc35b3944305ece1c5dfeade5 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sun, 20 Nov 2005 03:36:45 -0500 Subject: [libata] Print out SATA speed, if link is up Make the SATA phy probe messages a bit more informative. Note this only applies to drivers that use __sata_phy_reset(), which excludes some drivers. --- drivers/scsi/libata-core.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 665ae79e1fd..9f27e8d0e77 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1444,11 +1444,23 @@ void __sata_phy_reset(struct ata_port *ap) } while (time_before(jiffies, timeout)); /* TODO: phy layer with polling, timeouts, etc. */ - if (sata_dev_present(ap)) + sstatus = scr_read(ap, SCR_STATUS); + if (sata_dev_present(ap)) { + const char *speed; + u32 tmp; + + tmp = (sstatus >> 4) & 0xf; + if (tmp & (1 << 0)) + speed = "1.5"; + else if (tmp & (1 << 1)) + speed = "3.0"; + else + speed = ""; + printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", + ap->id, speed, sstatus); ata_port_probe(ap); - else { - sstatus = scr_read(ap, SCR_STATUS); - printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + } else { + printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", ap->id, sstatus); ata_port_disable(ap); } -- cgit v1.2.3-70-g09d2 From 2e06cb5859fdaeba0529806eb1bf161ffd0db201 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 28 Nov 2005 13:54:22 -0500 Subject: [bonding] Remove superfluous changelog. No need to record this information in source code, its all in the git repository, and kernel archives. --- drivers/net/bonding/bond_3ad.c | 32 --- drivers/net/bonding/bond_3ad.h | 13 -- drivers/net/bonding/bond_alb.c | 19 -- drivers/net/bonding/bond_alb.h | 9 - drivers/net/bonding/bond_main.c | 482 --------------------------------------- drivers/net/bonding/bond_sysfs.c | 41 ---- drivers/net/bonding/bonding.h | 23 -- 7 files changed, 619 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 04705233ca0..f3f5825469d 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -18,38 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/05/01 - Tsippy Mendelson and - * Amir Noam - * - Added support for lacp_rate module param. - * - * 2003/05/01 - Shmulik Hen - * - Based on discussion on mailing list, changed locking scheme - * to use lock/unlock or lock_bh/unlock_bh appropriately instead - * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing - * hidden bugs and solves system hangs that occurred due to the fact - * that holding lock_irqsave doesn't prevent softirqs from running. - * This also increases total throughput since interrupts are not - * blocked on each transmitted packets or monitor timeout. - * - * 2003/05/01 - Shmulik Hen - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * - * 2003/05/20 - Amir Noam - * - Fix long fail over time when releasing last slave of an active - * aggregator - send LACPDU on unbind of slave to tell partner this - * port is no longer aggregatable. - * - * 2003/06/25 - Tsippy Mendelson - * - Send LACPDU as highest priority packet to further fix the above - * problem on very high Tx traffic load where packets may get dropped - * by the slave. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes */ //#define BONDING_DEBUG 1 diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h index 673a30af566..5ee2cef5b03 100644 --- a/drivers/net/bonding/bond_3ad.h +++ b/drivers/net/bonding/bond_3ad.h @@ -18,19 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/05/01 - Tsippy Mendelson and - * Amir Noam - * - Added support for lacp_rate module param. - * - * 2003/05/01 - Shmulik Hen - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes */ #ifndef __BOND_3AD_H__ diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 9bd1e104554..854ddfb90da 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -18,25 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/06/25 - Shmulik Hen - * - Fixed signed/unsigned calculation errors that caused load sharing - * to collapse to one slave under very heavy UDP Tx stress. - * - * 2003/08/06 - Amir Noam - * - Add support for setting bond's MAC address with special - * handling required for ALB/TLB. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes - * - * 2003/12/30 - Amir Noam - * - Fixed: Cannot remove and re-enslave the original active slave. - * - * 2004/01/14 - Shmulik Hen - * - Add capability to tag self generated packets in ALB/TLB modes. */ //#define BONDING_DEBUG 1 diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h index e4091cd8d65..28f2a2fd1b5 100644 --- a/drivers/net/bonding/bond_alb.h +++ b/drivers/net/bonding/bond_alb.h @@ -18,15 +18,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2003/08/06 - Amir Noam - * - Add support for setting bond's MAC address with special - * handling required for ALB/TLB. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes */ #ifndef __BOND_ALB_H__ diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 40ff79175c4..2582d98ef5c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -29,488 +29,6 @@ * b: if a hw mac address already is there, eth0's hw mac address * will then be set from bond0. * - * v0.1 - first working version. - * v0.2 - changed stats to be calculated by summing slaves stats. - * - * Changes: - * Arnaldo Carvalho de Melo - * - fix leaks on failure at bond_init - * - * 2000/09/30 - Willy Tarreau - * - added trivial code to release a slave device. - * - fixed security bug (CAP_NET_ADMIN not checked) - * - implemented MII link monitoring to disable dead links : - * All MII capable slaves are checked every milliseconds - * (100 ms seems good). This value can be changed by passing it to - * insmod. A value of zero disables the monitoring (default). - * - fixed an infinite loop in bond_xmit_roundrobin() when there's no - * good slave. - * - made the code hopefully SMP safe - * - * 2000/10/03 - Willy Tarreau - * - optimized slave lists based on relevant suggestions from Thomas Davis - * - implemented active-backup method to obtain HA with two switches: - * stay as long as possible on the same active interface, while we - * also monitor the backup one (MII link status) because we want to know - * if we are able to switch at any time. ( pass "mode=1" to insmod ) - * - lots of stress testings because we need it to be more robust than the - * wires ! :-> - * - * 2000/10/09 - Willy Tarreau - * - added up and down delays after link state change. - * - optimized the slaves chaining so that when we run forward, we never - * repass through the bond itself, but we can find it by searching - * backwards. Renders the deletion more difficult, but accelerates the - * scan. - * - smarter enslaving and releasing. - * - finer and more robust SMP locking - * - * 2000/10/17 - Willy Tarreau - * - fixed two potential SMP race conditions - * - * 2000/10/18 - Willy Tarreau - * - small fixes to the monitoring FSM in case of zero delays - * 2000/11/01 - Willy Tarreau - * - fixed first slave not automatically used in trunk mode. - * 2000/11/10 : spelling of "EtherChannel" corrected. - * 2000/11/13 : fixed a race condition in case of concurrent accesses to ioctl(). - * 2000/12/16 : fixed improper usage of rtnl_exlock_nowait(). - * - * 2001/1/3 - Chad N. Tindel - * - The bonding driver now simulates MII status monitoring, just like - * a normal network device. It will show that the link is down iff - * every slave in the bond shows that their links are down. If at least - * one slave is up, the bond's MII status will appear as up. - * - * 2001/2/7 - Chad N. Tindel - * - Applications can now query the bond from user space to get - * information which may be useful. They do this by calling - * the BOND_INFO_QUERY ioctl. Once the app knows how many slaves - * are in the bond, it can call the BOND_SLAVE_INFO_QUERY ioctl to - * get slave specific information (# link failures, etc). See - * for more details. The structs of interest - * are ifbond and ifslave. - * - * 2001/4/5 - Chad N. Tindel - * - Ported to 2.4 Kernel - * - * 2001/5/2 - Jeffrey E. Mast - * - When a device is detached from a bond, the slave device is no longer - * left thinking that is has a master. - * - * 2001/5/16 - Jeffrey E. Mast - * - memset did not appropriately initialized the bond rw_locks. Used - * rwlock_init to initialize to unlocked state to prevent deadlock when - * first attempting a lock - * - Called SET_MODULE_OWNER for bond device - * - * 2001/5/17 - Tim Anderson - * - 2 paths for releasing for slave release; 1 through ioctl - * and 2) through close. Both paths need to release the same way. - * - the free slave in bond release is changing slave status before - * the free. The netdev_set_master() is intended to change slave state - * so it should not be done as part of the release process. - * - Simple rule for slave state at release: only the active in A/B and - * only one in the trunked case. - * - * 2001/6/01 - Tim Anderson - * - Now call dev_close when releasing a slave so it doesn't screw up - * out routing table. - * - * 2001/6/01 - Chad N. Tindel - * - Added /proc support for getting bond and slave information. - * Information is in /proc/net//info. - * - Changed the locking when calling bond_close to prevent deadlock. - * - * 2001/8/05 - Janice Girouard - * - correct problem where refcnt of slave is not incremented in bond_ioctl - * so the system hangs when halting. - * - correct locking problem when unable to malloc in bond_enslave. - * - adding bond_xmit_xor logic. - * - adding multiple bond device support. - * - * 2001/8/13 - Erik Habbinga - * - correct locking problem with rtnl_exlock_nowait - * - * 2001/8/23 - Janice Girouard - * - bzero initial dev_bonds, to correct oops - * - convert SIOCDEVPRIVATE to new MII ioctl calls - * - * 2001/9/13 - Takao Indoh - * - Add the BOND_CHANGE_ACTIVE ioctl implementation - * - * 2001/9/14 - Mark Huth - * - Change MII_LINK_READY to not check for end of auto-negotiation, - * but only for an up link. - * - * 2001/9/20 - Chad N. Tindel - * - Add the device field to bonding_t. Previously the net_device - * corresponding to a bond wasn't available from the bonding_t - * structure. - * - * 2001/9/25 - Janice Girouard - * - add arp_monitor for active backup mode - * - * 2001/10/23 - Takao Indoh - * - Various memory leak fixes - * - * 2001/11/5 - Mark Huth - * - Don't take rtnl lock in bond_mii_monitor as it deadlocks under - * certain hotswap conditions. - * Note: this same change may be required in bond_arp_monitor ??? - * - Remove possibility of calling bond_sethwaddr with NULL slave_dev ptr - * - Handle hot swap ethernet interface deregistration events to remove - * kernel oops following hot swap of enslaved interface - * - * 2002/1/2 - Chad N. Tindel - * - Restore original slave flags at release time. - * - * 2002/02/18 - Erik Habbinga - * - bond_release(): calling kfree on our_slave after call to - * bond_restore_slave_flags, not before - * - bond_enslave(): saving slave flags into original_flags before - * call to netdev_set_master, so the IFF_SLAVE flag doesn't end - * up in original_flags - * - * 2002/04/05 - Mark Smith and - * Steve Mead - * - Port Gleb Natapov's multicast support patchs from 2.4.12 - * to 2.4.18 adding support for multicast. - * - * 2002/06/10 - Tony Cureington - * - corrected uninitialized pointer (ifr.ifr_data) in bond_check_dev_link; - * actually changed function to use MIIPHY, then MIIREG, and finally - * ETHTOOL to determine the link status - * - fixed bad ifr_data pointer assignments in bond_ioctl - * - corrected mode 1 being reported as active-backup in bond_get_info; - * also added text to distinguish type of load balancing (rr or xor) - * - change arp_ip_target module param from "1-12s" (array of 12 ptrs) - * to "s" (a single ptr) - * - * 2002/08/30 - Jay Vosburgh - * - Removed acquisition of xmit_lock in set_multicast_list; caused - * deadlock on SMP (lock is held by caller). - * - Revamped SIOCGMIIPHY, SIOCGMIIREG portion of bond_check_dev_link(). - * - * 2002/09/18 - Jay Vosburgh - * - Fixed up bond_check_dev_link() (and callers): removed some magic - * numbers, banished local MII_ defines, wrapped ioctl calls to - * prevent EFAULT errors - * - * 2002/9/30 - Jay Vosburgh - * - make sure the ip target matches the arp_target before saving the - * hw address. - * - * 2002/9/30 - Dan Eisner - * - make sure my_ip is set before taking down the link, since - * not all switches respond if the source ip is not set. - * - * 2002/10/8 - Janice Girouard - * - read in the local ip address when enslaving a device - * - add primary support - * - make sure 2*arp_interval has passed when a new device - * is brought on-line before taking it down. - * - * 2002/09/11 - Philippe De Muyter - * - Added bond_xmit_broadcast logic. - * - Added bond_mode() support function. - * - * 2002/10/26 - Laurent Deniel - * - allow to register multicast addresses only on active slave - * (useful in active-backup mode) - * - add multicast module parameter - * - fix deletion of multicast groups after unloading module - * - * 2002/11/06 - Kameshwara Rayaprolu - * - Changes to prevent panic from closing the device twice; if we close - * the device in bond_release, we must set the original_flags to down - * so it won't be closed again by the network layer. - * - * 2002/11/07 - Tony Cureington - * - Fix arp_target_hw_addr memory leak - * - Created activebackup_arp_monitor function to handle arp monitoring - * in active backup mode - the bond_arp_monitor had several problems... - * such as allowing slaves to tx arps sequentially without any delay - * for a response - * - Renamed bond_arp_monitor to loadbalance_arp_monitor and re-wrote - * this function to just handle arp monitoring in load-balancing mode; - * it is a lot more compact now - * - Changes to ensure one and only one slave transmits in active-backup - * mode - * - Robustesize parameters; warn users about bad combinations of - * parameters; also if miimon is specified and a network driver does - * not support MII or ETHTOOL, inform the user of this - * - Changes to support link_failure_count when in arp monitoring mode - * - Fix up/down delay reported in /proc - * - Added version; log version; make version available from "modinfo -d" - * - Fixed problem in bond_check_dev_link - if the first IOCTL (SIOCGMIIPH) - * failed, the ETHTOOL ioctl never got a chance - * - * 2002/11/16 - Laurent Deniel - * - fix multicast handling in activebackup_arp_monitor - * - remove one unnecessary and confusing curr_active_slave == slave test - * in activebackup_arp_monitor - * - * 2002/11/17 - Laurent Deniel - * - fix bond_slave_info_query when slave_id = num_slaves - * - * 2002/11/19 - Janice Girouard - * - correct ifr_data reference. Update ifr_data reference - * to mii_ioctl_data struct values to avoid confusion. - * - * 2002/11/22 - Bert Barbe - * - Add support for multiple arp_ip_target - * - * 2002/12/13 - Jay Vosburgh - * - Changed to allow text strings for mode and multicast, e.g., - * insmod bonding mode=active-backup. The numbers still work. - * One change: an invalid choice will cause module load failure, - * rather than the previous behavior of just picking one. - * - Minor cleanups; got rid of dup ctype stuff, atoi function - * - * 2003/02/07 - Jay Vosburgh - * - Added use_carrier module parameter that causes miimon to - * use netif_carrier_ok() test instead of MII/ETHTOOL ioctls. - * - Minor cleanups; consolidated ioctl calls to one function. - * - * 2003/02/07 - Tony Cureington - * - Fix bond_mii_monitor() logic error that could result in - * bonding round-robin mode ignoring links after failover/recovery - * - * 2003/03/17 - Jay Vosburgh - * - kmalloc fix (GFP_KERNEL to GFP_ATOMIC) reported by - * Shmulik dot Hen at intel.com. - * - Based on discussion on mailing list, changed use of - * update_slave_cnt(), created wrapper functions for adding/removing - * slaves, changed bond_xmit_xor() to check slave_cnt instead of - * checking slave and slave->dev (which only worked by accident). - * - Misc code cleanup: get arp_send() prototype from header file, - * add max_bonds to bonding.txt. - * - * 2003/03/18 - Tsippy Mendelson and - * Shmulik Hen - * - Make sure only bond_attach_slave() and bond_detach_slave() can - * manipulate the slave list, including slave_cnt, even when in - * bond_release_all(). - * - Fixed hang in bond_release() with traffic running: - * netdev_set_master() must not be called from within the bond lock. - * - * 2003/03/18 - Tsippy Mendelson and - * Shmulik Hen - * - Fixed hang in bond_enslave() with traffic running: - * netdev_set_master() must not be called from within the bond lock. - * - * 2003/03/18 - Amir Noam - * - Added support for getting slave's speed and duplex via ethtool. - * Needed for 802.3ad and other future modes. - * - * 2003/03/18 - Tsippy Mendelson and - * Shmulik Hen - * - Enable support of modes that need to use the unique mac address of - * each slave. - * * bond_enslave(): Moved setting the slave's mac address, and - * openning it, from the application to the driver. This breaks - * backward comaptibility with old versions of ifenslave that open - * the slave before enalsving it !!!. - * * bond_release(): The driver also takes care of closing the slave - * and restoring its original mac address. - * - Removed the code that restores all base driver's flags. - * Flags are automatically restored once all undo stages are done - * properly. - * - Block possibility of enslaving before the master is up. This - * prevents putting the system in an unstable state. - * - * 2003/03/18 - Amir Noam , - * Tsippy Mendelson and - * Shmulik Hen - * - Added support for IEEE 802.3ad Dynamic link aggregation mode. - * - * 2003/05/01 - Amir Noam - * - Added ABI version control to restore compatibility between - * new/old ifenslave and new/old bonding. - * - * 2003/05/01 - Shmulik Hen - * - Fixed bug in bond_release_all(): save old value of curr_active_slave - * before setting it to NULL. - * - Changed driver versioning scheme to include version number instead - * of release date (that is already in another field). There are 3 - * fields X.Y.Z where: - * X - Major version - big behavior changes - * Y - Minor version - addition of features - * Z - Extra version - minor changes and bug fixes - * The current version is 1.0.0 as a base line. - * - * 2003/05/01 - Tsippy Mendelson and - * Amir Noam - * - Added support for lacp_rate module param. - * - Code beautification and style changes (mainly in comments). - * new version - 1.0.1 - * - * 2003/05/01 - Shmulik Hen - * - Based on discussion on mailing list, changed locking scheme - * to use lock/unlock or lock_bh/unlock_bh appropriately instead - * of lock_irqsave/unlock_irqrestore. The new scheme helps exposing - * hidden bugs and solves system hangs that occurred due to the fact - * that holding lock_irqsave doesn't prevent softirqs from running. - * This also increases total throughput since interrupts are not - * blocked on each transmitted packets or monitor timeout. - * new version - 2.0.0 - * - * 2003/05/01 - Shmulik Hen - * - Added support for Transmit load balancing mode. - * - Concentrate all assignments of curr_active_slave to a single point - * so specific modes can take actions when the primary adapter is - * changed. - * - Take the updelay parameter into consideration during bond_enslave - * since some adapters loose their link during setting the device. - * - Renamed bond_3ad_link_status_changed() to - * bond_3ad_handle_link_change() for compatibility with TLB. - * new version - 2.1.0 - * - * 2003/05/01 - Tsippy Mendelson - * - Added support for Adaptive load balancing mode which is - * equivalent to Transmit load balancing + Receive load balancing. - * new version - 2.2.0 - * - * 2003/05/15 - Jay Vosburgh - * - Applied fix to activebackup_arp_monitor posted to bonding-devel - * by Tony Cureington . Fixes ARP - * monitor endless failover bug. Version to 2.2.10 - * - * 2003/05/20 - Amir Noam - * - Fixed bug in ABI version control - Don't commit to a specific - * ABI version if receiving unsupported ioctl commands. - * - * 2003/05/22 - Jay Vosburgh - * - Fix ifenslave -c causing bond to loose existing routes; - * added bond_set_mac_address() that doesn't require the - * bond to be down. - * - In conjunction with fix for ifenslave -c, in - * bond_change_active(), changing to the already active slave - * is no longer an error (it successfully does nothing). - * - * 2003/06/30 - Amir Noam - * - Fixed bond_change_active() for ALB/TLB modes. - * Version to 2.2.14. - * - * 2003/07/29 - Amir Noam - * - Fixed ARP monitoring bug. - * Version to 2.2.15. - * - * 2003/07/31 - Willy Tarreau - * - Fixed kernel panic when using ARP monitoring without - * setting bond's IP address. - * Version to 2.2.16. - * - * 2003/08/06 - Amir Noam - * - Back port from 2.6: use alloc_netdev(); fix /proc handling; - * made stats a part of bond struct so no need to allocate - * and free it separately; use standard list operations instead - * of pre-allocated array of bonds. - * Version to 2.3.0. - * - * 2003/08/07 - Jay Vosburgh , - * Amir Noam and - * Shmulik Hen - * - Propagating master's settings: Distinguish between modes that - * use a primary slave from those that don't, and propagate settings - * accordingly; Consolidate change_active opeartions and add - * reselect_active and find_best opeartions; Decouple promiscuous - * handling from the multicast mode setting; Add support for changing - * HW address and MTU with proper unwind; Consolidate procfs code, - * add CHANGENAME handler; Enhance netdev notification handling. - * Version to 2.4.0. - * - * 2003/09/15 - Stephen Hemminger , - * Amir Noam - * - Convert /proc to seq_file interface. - * Change /proc/net/bondX/info to /proc/net/bonding/bondX. - * Set version to 2.4.1. - * - * 2003/11/20 - Amir Noam - * - Fix /proc creation/destruction. - * - * 2003/12/01 - Shmulik Hen - * - Massive cleanup - Set version to 2.5.0 - * Code changes: - * o Consolidate format of prints and debug prints. - * o Remove bonding_t/slave_t typedefs and consolidate all casts. - * o Remove dead code and unnecessary checks. - * o Consolidate starting/stopping timers. - * o Consolidate handling of primary module param throughout the code. - * o Removed multicast module param support - all settings are done - * according to mode. - * o Slave list iteration - bond is no longer part of the list, - * added cyclic list iteration macros. - * o Consolidate error handling in all xmit functions. - * Style changes: - * o Consolidate function naming and declarations. - * o Consolidate function params and local variables names. - * o Consolidate return values. - * o Consolidate curly braces. - * o Consolidate conditionals format. - * o Change struct member names and types. - * o Chomp trailing spaces, remove empty lines, fix indentations. - * o Re-organize code according to context. - * - * 2003/12/30 - Amir Noam - * - Fixed: Cannot remove and re-enslave the original active slave. - * - Fixed: Releasing the original active slave causes mac address - * duplication. - * - Add support for slaves that use ethtool_ops. - * Set version to 2.5.3. - * - * 2004/01/05 - Amir Noam - * - Save bonding parameters per bond instead of using the global values. - * Set version to 2.5.4. - * - * 2004/01/14 - Shmulik Hen - * - Enhance VLAN support: - * * Add support for VLAN hardware acceleration capable slaves. - * * Add capability to tag self generated packets in ALB/TLB modes. - * Set version to 2.6.0. - * 2004/10/29 - Mitch Williams - * - Fixed bug when unloading module while using 802.3ad. If - * spinlock debugging is turned on, this causes a stack dump. - * Solution is to move call to dev_remove_pack outside of the - * spinlock. - * Set version to 2.6.1. - * 2005/06/05 - Jay Vosburgh - * - Support for generating gratuitous ARPs in active-backup mode. - * Includes support for VLAN tagging all bonding-generated ARPs - * as needed. Set version to 2.6.2. - * 2005/06/08 - Jason Gabler - * - alternate hashing policy support for mode 2 - * * Added kernel parameter "xmit_hash_policy" to allow the selection - * of different hashing policies for mode 2. The original mode 2 - * policy is the default, now found in xmit_hash_policy_layer2(). - * * Added xmit_hash_policy_layer34() - * - Modified by Jay Vosburgh to also support mode 4. - * Set version to 2.6.3. - * 2005/09/26 - Jay Vosburgh - * - Removed backwards compatibility for old ifenslaves. Version 2.6.4. - * 2005/09/27 - Mitch Williams - * - Radheka Godse - * - Split out bond creation code to allow for sysfs interface. - * - Removed static declaration on some functions and data items. - * - Added sysfs support, including capability to add/remove/change - * any bond at runtime. - * - * - Miscellaneous: - * - Added bonding: : prefix to sysfs log messages - * - Added arp_ip_targets to /proc entry - * - Allow ARP target table to have empty entries - * - trivial fix: added missing modes description to modinfo - * - Corrected bug in ALB init where kmalloc is called inside - * a held lock - * - Corrected behavior to maintain bond link when changing - * from arp monitor to miimon and vice versa - * - Added missing bonding: : prefix to alb, ad log messages - * - Fixed stack dump warnings seen if changing between miimon - * and arp monitoring when the bond interface is down. - * - Fixed stack dump warnings seen when enslaving an e100 - * driver - * - Set version to 3.0.0 */ //#define BONDING_DEBUG 1 diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index c5f1c52863c..32d13da43a0 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -19,47 +19,6 @@ * The full GNU General Public License is included in this distribution in the * file called LICENSE. * - * - * Changes: - * - * 2004/12/12 - Mitch Williams - * - Initial creation of sysfs interface. - * - * 2005/06/22 - Radheka Godse - * - Added ifenslave -c type functionality to sysfs - * - Added sysfs files for attributes such as MII Status and - * 802.3ad aggregator that are displayed in /proc - * - Added "name value" format to sysfs "mode" and - * "lacp_rate", for e.g., "active-backup 1" or "slow 0" for - * consistency and ease of script parsing - * - Fixed reversal of octets in arp_ip_targets via sysfs - * - sysfs support to handle bond interface re-naming - * - Moved all sysfs entries into /sys/class/net instead of - * of using a standalone subsystem. - * - Added sysfs symlinks between masters and slaves - * - Corrected bugs in sysfs unload path when creating bonds - * with existing interface names. - * - Removed redundant sysfs stat file since it duplicates slave info - * from the proc file - * - Fixed errors in sysfs show/store arp targets. - * - For consistency with ifenslave, instead of exiting - * with an error, updated bonding sysfs to - * close and attempt to enslave an up adapter. - * - Fixed NULL dereference when adding a slave interface - * that does not exist. - * - Added checks in sysfs bonding to reject invalid ip addresses - * - Synch up with post linux-2.6.12 bonding changes - * - Created sysfs bond attrib for xmit_hash_policy - * - * 2005/09/19 - Mitch Williams - * - Changed semantics of multi-item files to be command-based - * instead of list-based. - * - Changed ARP target handler to use in_aton instead of sscanf - * - Style changes. - * 2005/09/27 - Mitch Williams - * - Made line endings consistent. - * - Removed "none" from primary output - just put blank instead - * - Fixed bug with long interface names */ #include #include diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index d6d085480f2..015c7f1d1bc 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -10,29 +10,6 @@ * This software may be used and distributed according to the terms * of the GNU Public License, incorporated herein by reference. * - * - * 2003/03/18 - Amir Noam , - * Tsippy Mendelson and - * Shmulik Hen - * - Added support for IEEE 802.3ad Dynamic link aggregation mode. - * - * 2003/05/01 - Tsippy Mendelson and - * Amir Noam - * - Code beautification and style changes (mainly in comments). - * - * 2003/05/01 - Shmulik Hen - * - Added support for Transmit load balancing mode. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes - * - * 2005/05/05 - Jason Gabler - * - added "xmit_policy" kernel parameter for alternate hashing policy - * support for mode 2 - * - * 2005/09/27 - Mitch Williams - * Radheka Godse - * - Added bonding sysfs interface */ #ifndef _LINUX_BONDING_H -- cgit v1.2.3-70-g09d2 From 6c9e5eb522bca694a0311898039d2707e9bc7783 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 30 Nov 2005 16:42:55 -0500 Subject: [libata sata_promise] minor whitespace cleanup --- drivers/scsi/sata_promise.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 8a8e3e3ef0e..25e56fb9ad9 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -703,7 +703,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->port[3].scr_addr = base + 0x700; break; case board_2037x: - probe_ent->n_ports = 2; + probe_ent->n_ports = 2; break; case board_20619: probe_ent->n_ports = 4; @@ -713,7 +713,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e probe_ent->port[2].scr_addr = base + 0x600; probe_ent->port[3].scr_addr = base + 0x700; - break; + break; default: BUG(); break; -- cgit v1.2.3-70-g09d2 From 214376434863f9ca109a7853fbbd6db284d3fba7 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:11 -0800 Subject: [PATCH] sky2: eliminate special case for EC-A1 Eliminate special case for EC-A1. The overhead isn't so great that having config option is worth it. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 7 ------- drivers/net/sky2.c | 8 ++------ 2 files changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fca6000d6e0..0f2e4c11f80 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2022,13 +2022,6 @@ config SKY2 To compile this driver as a module, choose M here: the module will be called sky2. This is recommended. -config SKY2_EC_A1 - bool "Support old Yukon-EC A1 chipset" - depends on SKY2 - ---help--- - Include support for early revisions of the Yukon EC chipset - that required extra workarounds. If in doubt, say N. - config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 9f89000e5ad..d7a94d62d80 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -67,13 +67,9 @@ * a receive requires one (or two if using 64 bit dma). */ -#ifdef CONFIG_SKY2_EC_A1 #define is_ec_a1(hw) \ - ((hw)->chip_id == CHIP_ID_YUKON_EC && \ - (hw)->chip_rev == CHIP_REV_YU_EC_A1) -#else -#define is_ec_a1(hw) 0 -#endif + unlikely((hw)->chip_id == CHIP_ID_YUKON_EC && \ + (hw)->chip_rev == CHIP_REV_YU_EC_A1) #define RX_LE_SIZE 256 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -- cgit v1.2.3-70-g09d2 From ef743d3359813795fb38c4308bff2311eb30651f Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:12 -0800 Subject: [PATCH] sky2: add MII support Add MII ioctl interface to sky2. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 61 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d7a94d62d80..0b9b7017416 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -47,6 +47,7 @@ #include #include #include +#include #include @@ -136,7 +137,7 @@ static const char *yukon_name[] = { /* Access to external PHY */ -static void gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) +static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { int i; @@ -146,13 +147,15 @@ static void gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) for (i = 0; i < PHY_RETRIES; i++) { if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) - return; + return 0; udelay(1); } + printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name); + return -ETIMEDOUT; } -static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) +static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val) { int i; @@ -160,14 +163,24 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); for (i = 0; i < PHY_RETRIES; i++) { - if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) - goto ready; + if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) { + *val = gma_read16(hw, port, GM_SMI_DATA); + return 0; + } + udelay(1); } - printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name); -ready: - return gma_read16(hw, port, GM_SMI_DATA); + return -ETIMEDOUT; +} + +static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg) +{ + u16 v; + + if (__gm_phy_read(hw, port, reg, &v) != 0) + printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name); + return v; } static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state) @@ -792,6 +805,44 @@ static void sky2_rx_clean(struct sky2_port *sky2) } } +/* Basic MII support */ +static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = if_mii(ifr); + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + int err = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -ENODEV; /* Phy still in reset */ + + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = PHY_ADDR_MARV; + + /* fallthru */ + case SIOCGMIIREG: { + u16 val = 0; + spin_lock_bh(&hw->phy_lock); + err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); + spin_unlock_bh(&hw->phy_lock); + data->val_out = val; + break; + } + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + spin_lock_bh(&hw->phy_lock); + err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, + data->val_in); + spin_unlock_bh(&hw->phy_lock); + break; + } + return err; +} + #ifdef SKY2_VLAN_TAG_USED static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) { @@ -2708,8 +2759,10 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &hw->pdev->dev); + dev->irq = hw->pdev->irq; dev->open = sky2_up; dev->stop = sky2_down; + dev->do_ioctl = sky2_ioctl; dev->hard_start_xmit = sky2_xmit_frame; dev->get_stats = sky2_get_stats; dev->set_multicast_list = sky2_set_multicast; -- cgit v1.2.3-70-g09d2 From 42eeea0145a1c7570624ddeaa15d3f357a52edf8 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:13 -0800 Subject: [PATCH] sky2: fix receive flush/pause issues Fix issues with pause and flush. This code works on all chip versions tested. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0b9b7017416..83361aed49f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -485,8 +485,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) int i; const u8 *addr = hw->dev[port]->dev_addr; - sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); - sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE); sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); @@ -589,11 +589,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) GMF_RX_CTRL_DEF); /* Flush Rx MAC FIFO on any flow control or error */ - reg = GMR_FS_ANY_ERR; - if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1) - reg = 0; /* WA dev #4.115 */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); - sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg); /* Set threshold to 0xa (64 bytes) * ASF disabled so no need to do WA dev #4.30 */ @@ -1363,9 +1360,6 @@ static void sky2_link_up(struct sky2_port *sky2) unsigned port = sky2->port; u16 reg; - /* disable Rx GMAC FIFO flush mode */ - sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_F_FL_OFF); - /* Enable Transmit FIFO Underrun */ sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK); @@ -1611,9 +1605,12 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; - if (!(status & GMR_FS_RX_OK) || (status & GMR_FS_ANY_ERR)) + if (status & GMR_FS_ANY_ERR) goto error; + if (!(status & GMR_FS_RX_OK)) + goto resubmit; + if (length < RX_COPY_THRESHOLD) { skb = alloc_skb(length + 2, GFP_ATOMIC); if (!skb) @@ -1662,9 +1659,6 @@ resubmit: return skb; error: - if (status & GMR_FS_GOOD_FC) - goto resubmit; - if (netif_msg_rx_err(sky2)) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", sky2->netdev->name, status, length); -- cgit v1.2.3-70-g09d2 From 13210ce5c06ed9537558b85e9c0df4248b28f1f7 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:14 -0800 Subject: [PATCH] sky2: improve receive performance Changes to receive side processing: * bigger receive ring * clean up polling loop Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 66 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 34 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 83361aed49f..e6f71c1232b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -72,10 +72,10 @@ unlikely((hw)->chip_id == CHIP_ID_YUKON_EC && \ (hw)->chip_rev == CHIP_REV_YU_EC_A1) -#define RX_LE_SIZE 256 +#define RX_LE_SIZE 512 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) -#define RX_DEF_PENDING 128 +#define RX_DEF_PENDING RX_MAX_PENDING #define RX_COPY_THRESHOLD 256 #define TX_RING_SIZE 512 @@ -1596,7 +1596,6 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, { struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; - struct net_device *dev; const unsigned int bufsize = rx_size(sky2); if (unlikely(netif_msg_rx_status(sky2))) @@ -1643,11 +1642,6 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, } skb_put(skb, length); - dev = sky2->netdev; - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - dev->last_rx = jiffies; - resubmit: re->skb->ip_summed = CHECKSUM_NONE; sky2_rx_add(sky2, re); @@ -1702,35 +1696,42 @@ static int sky2_poll(struct net_device *dev0, int *budget) BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); - do { - struct sky2_status_le *le = hw->st_le + hw->st_idx; + while (hwidx != hw->st_idx) { + struct sky2_status_le *le = hw->st_le + hw->st_idx; + struct net_device *dev; struct sky2_port *sky2; struct sk_buff *skb; u32 status; u16 length; + u8 op; - /* Are we done yet? */ - if (hw->st_idx == hwidx) { - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); - hwidx = sky2_read16(hw, STAT_PUT_IDX); - if (hwidx == hw->st_idx) - break; - } - + le = hw->st_le + hw->st_idx; hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; - prefetch(&hw->st_le[hw->st_idx]); + prefetch(hw->st_le + hw->st_idx); BUG_ON(le->link >= hw->ports || !hw->dev[le->link]); - sky2 = netdev_priv(hw->dev[le->link]); + BUG_ON(le->link >= 2); + dev = hw->dev[le->link]; + if (dev == NULL || !netif_running(dev)) + continue; + + sky2 = netdev_priv(dev); status = le32_to_cpu(le->status); length = le16_to_cpu(le->length); + op = le->opcode & ~HW_OWNER; + le->opcode = 0; - switch (le->opcode & ~HW_OWNER) { + switch (op) { case OP_RXSTAT: skb = sky2_receive(sky2, length, status); if (!skb) break; + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + #ifdef SKY2_VLAN_TAG_USED if (sky2->vlgrp && (status & GMR_FS_VLAN)) { vlan_hwaccel_receive_skb(skb, @@ -1739,7 +1740,9 @@ static int sky2_poll(struct net_device *dev0, int *budget) } else #endif netif_receive_skb(skb); - ++work_done; + + if (++work_done >= to_do) + goto exit_loop; break; #ifdef SKY2_VLAN_TAG_USED @@ -1765,18 +1768,15 @@ static int sky2_poll(struct net_device *dev0, int *budget) default: if (net_ratelimit()) printk(KERN_WARNING PFX - "unknown status opcode 0x%x\n", - le->opcode); + "unknown status opcode 0x%x\n", op); break; } + } - le->opcode = 0; /* paranoia */ - } while (work_done < to_do); +exit_loop: mmiowb(); - *budget -= work_done; - dev0->quota -= work_done; if (work_done < to_do) { /* * Another chip workaround, need to restart TX timer if status @@ -1790,11 +1790,13 @@ static int sky2_poll(struct net_device *dev0, int *budget) netif_rx_complete(dev0); hw->intr_mask |= Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); - sky2_read32(hw, B0_IMSK); + mmiowb(); + return 0; + } else { + *budget -= work_done; + dev0->quota -= work_done; + return 1; } - - return work_done >= to_do; - } static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status) -- cgit v1.2.3-70-g09d2 From 5a5b1ea026572ac0e5e03d7322deb546d60f9e6e Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:15 -0800 Subject: [PATCH] sky2: add Yukon-EC ultra support Add support for Yukon-EC Ultra chip as implemented in SysKonnect's driver version 8.26. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 27 ++++++++++++++++++++++++++- drivers/net/sky2.h | 9 +++++++-- 2 files changed, 33 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e6f71c1232b..aff347f1ea4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -114,9 +114,11 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, { 0 } }; @@ -130,6 +132,7 @@ static const char *yukon_name[] = { [CHIP_ID_YUKON_LITE - CHIP_ID_YUKON] = "Lite", /* 0xb0 */ [CHIP_ID_YUKON_LP - CHIP_ID_YUKON] = "LP", /* 0xb2 */ [CHIP_ID_YUKON_XL - CHIP_ID_YUKON] = "XL", /* 0xb3 */ + [CHIP_ID_YUKON_EC_U - CHIP_ID_YUKON] = "EC Ultra", /* 0xb4 */ [CHIP_ID_YUKON_EC - CHIP_ID_YUKON] = "EC", /* 0xb6 */ [CHIP_ID_YUKON_FE - CHIP_ID_YUKON] = "FE", /* 0xb7 */ @@ -599,6 +602,18 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); + + if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); + sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); + if (hw->dev[port]->mtu > ETH_DATA_LEN) { + /* set Tx GMAC FIFO Almost Empty Threshold */ + sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180); + /* Disable Store & Forward mode for TX */ + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); + } + } + } static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) @@ -984,6 +999,10 @@ static int sky2_up(struct net_device *dev) RB_RST_SET); sky2_qset(hw, txqaddr[port], 0x600); + if (hw->chip_id == CHIP_ID_YUKON_EC_U) + sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); + + sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); @@ -1553,6 +1572,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; + if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN) + return -EINVAL; + if (!netif_running(dev)) { dev->mtu = new_mtu; return 0; @@ -1972,6 +1994,7 @@ static inline u32 sky2_khz(const struct sky2_hw *hw) { switch (hw->chip_id) { case CHIP_ID_YUKON_EC: + case CHIP_ID_YUKON_EC_U: return 125000; /* 125 Mhz */ case CHIP_ID_YUKON_FE: return 100000; /* 100 Mhz */ @@ -2796,7 +2819,9 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->port = port; - dev->features |= NETIF_F_LLTX | NETIF_F_TSO; + dev->features |= NETIF_F_LLTX; + if (hw->chip_id != CHIP_ID_YUKON_EC_U) + dev->features |= NETIF_F_TSO; if (highmem) dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 629d08f170f..f836b0322b1 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -309,7 +309,7 @@ enum { Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2, Y2_HWE_ALL_MASK = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | - Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | + Y2_IS_PCI_EXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK, }; @@ -346,6 +346,7 @@ enum { CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ + CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ @@ -579,7 +580,8 @@ enum { RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ - + RX_GMF_UP_THR = 0x0c58,/* 8 bit Rx Upper Pause Thr (Yukon-EC_U) */ + RX_GMF_LP_THR = 0x0c5a,/* 8 bit Rx Lower Pause Thr (Yukon-EC_U) */ RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ @@ -1557,6 +1559,9 @@ enum { /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { + TX_STFW_DIS = 1<<31,/* Disable Store & Forward (Yukon-EC Ultra) */ + TX_STFW_ENA = 1<<30,/* Enable Store & Forward (Yukon-EC Ultra) */ + TX_VLAN_TAG_ON = 1<<25,/* enable VLAN tagging */ TX_VLAN_TAG_OFF = 1<<24,/* disable VLAN tagging */ -- cgit v1.2.3-70-g09d2 From a018e3305fe1e500e28830666b1757b75c6b4df5 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:16 -0800 Subject: [PATCH] sky2: handle DMA boundary crossing Handle the case of DMA spanning 32 bit boundary. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index aff347f1ea4..2253140ff4d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -723,11 +723,17 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) return le; } +/* Return high part of DMA address (could be 32 or 64 bit) */ +static inline u32 high32(dma_addr_t a) +{ + return (a >> 16) >> 16; +} + /* Build description to hardware about buffer */ static inline void sky2_rx_add(struct sky2_port *sky2, struct ring_info *re) { struct sky2_rx_le *le; - u32 hi = (re->mapaddr >> 16) >> 16; + u32 hi = high32(re->mapaddr); re->idx = sky2->rx_put; if (sky2->rx_addr64 != hi) { @@ -735,7 +741,7 @@ static inline void sky2_rx_add(struct sky2_port *sky2, struct ring_info *re) le->addr = cpu_to_le32(hi); le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; - sky2->rx_addr64 = hi; + sky2->rx_addr64 = high32(re->mapaddr + re->maplen); } le = sky2_next_rx(sky2); @@ -1100,17 +1106,17 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) len = skb_headlen(skb); mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); - addr64 = (mapping >> 16) >> 16; + addr64 = high32(mapping); re = sky2->tx_ring + sky2->tx_prod; - /* Send high bits if changed */ - if (addr64 != sky2->tx_addr64) { + /* Send high bits if changed or crosses boundary */ + if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) { le = get_tx_le(sky2); le->tx.addr = cpu_to_le32(addr64); le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; - sky2->tx_addr64 = addr64; + sky2->tx_addr64 = high32(mapping + len); } /* Check for TCP Segmentation Offload */ -- cgit v1.2.3-70-g09d2 From 0a1225769763779288d759e904c4f5a660844ce4 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:17 -0800 Subject: [PATCH] sky2: change netif_rx_schedule_test to __netif_schedule_prep I didn't like the name netif_rx_schedule_test(), in earlier patches and changed to __netif_rx_schedule_prep to be more consistent. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 5 +++-- include/linux/netdevice.h | 8 ++++---- 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2253140ff4d..f56de989420 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1961,10 +1961,11 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) if (status & Y2_IS_STAT_BMU) { hw->intr_mask &= ~Y2_IS_STAT_BMU; sky2_write32(hw, B0_IMSK, hw->intr_mask); - prefetch(&hw->st_le[hw->st_idx]); - if (netif_rx_schedule_test(dev0)) + if (likely(__netif_rx_schedule_prep(dev0))) { + prefetch(&hw->st_le[hw->st_idx]); __netif_rx_schedule(dev0); + } } if (status & Y2_IS_IRQ_PHY1) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 07e114d48bb..7fda03d338d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -802,16 +802,16 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits) return (1 << debug_value) - 1; } -/* Schedule rx intr now? */ -static inline int netif_rx_schedule_test(struct net_device *dev) +/* Test if receive needs to be scheduled */ +static inline int __netif_rx_schedule_prep(struct net_device *dev) { return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); } -/* Schedule only if device is up */ +/* Test if receive needs to be scheduled but only if up */ static inline int netif_rx_schedule_prep(struct net_device *dev) { - return netif_running(dev) && netif_rx_schedule_test(dev); + return netif_running(dev) && __netif_rx_schedule_prep(dev); } /* Add interface to tail of rx poll list. This assumes that _prep has -- cgit v1.2.3-70-g09d2 From 018d1c667ef4dce5299dd79d38447840789c97d6 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:18 -0800 Subject: [PATCH] sky2: race with MTU change Avoid possible race conditions when doing MTU and change and shutdown. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f56de989420..1d5c3039f53 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1298,8 +1298,16 @@ static int sky2_down(struct net_device *dev) if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); + /* Stop more packets from being queued */ netif_stop_queue(dev); + /* Disable port IRQ */ + local_irq_disable(); + hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); + sky2_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); + + sky2_phy_reset(hw, port); /* Stop transmitter */ @@ -1346,6 +1354,8 @@ static int sky2_down(struct net_device *dev) /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + synchronize_irq(hw->pdev->irq); + sky2_tx_clean(sky2); sky2_rx_clean(sky2); @@ -1586,9 +1596,12 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return 0; } - local_irq_disable(); sky2_write32(hw, B0_IMSK, 0); + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_stop_queue(dev); + netif_poll_disable(hw->dev[0]); + ctl = gma_read16(hw, sky2->port, GM_GP_CTRL); gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); sky2_rx_stop(sky2); @@ -1608,9 +1621,10 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) err = sky2_rx_start(sky2); gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); + netif_poll_disable(hw->dev[0]); + netif_wake_queue(dev); sky2_write32(hw, B0_IMSK, hw->intr_mask); - sky2_read32(hw, B0_IMSK); - local_irq_enable(); + return err; } -- cgit v1.2.3-70-g09d2 From 2224795d7e4c7f7e44fe21f0fa067d62539308fb Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:19 -0800 Subject: [PATCH] sky2: dual port tx completion Sometimes on dual port cards, one tx complete may cover both ports. To handle that rearrange poll routine to lookup at end. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1d5c3039f53..52c7b188631 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1242,6 +1242,9 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) struct net_device *dev = sky2->netdev; unsigned i; + if (done == sky2->tx_cons) + return; + if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done, up to %u\n", dev->name, done); @@ -1711,16 +1714,18 @@ error: goto resubmit; } -/* Transmit ring index in reported status block is encoded as: - * - * | TXS2 | TXA2 | TXS1 | TXA1 +/* + * Check for transmit complete */ -static inline u16 tx_index(u8 port, u32 status, u16 len) +static inline void sky2_tx_check(struct sky2_hw *hw, int port) { - if (port == 0) - return status & 0xfff; - else - return ((status >> 24) & 0xff) | (len & 0xf) << 8; + struct net_device *dev = hw->dev[port]; + + if (dev && netif_running(dev)) { + sky2_tx_complete(netdev_priv(dev), + sky2_read16(hw, port == 0 + ? STAT_TXA1_RIDX : STAT_TXA2_RIDX)); + } } /* @@ -1803,8 +1808,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) break; case OP_TXINDEXLE: - sky2_tx_complete(sky2, - tx_index(sky2->port, status, length)); + /* pick up transmit status later */ break; default: @@ -1816,6 +1820,8 @@ static int sky2_poll(struct net_device *dev0, int *budget) } exit_loop: + sky2_tx_check(hw, 0); + sky2_tx_check(hw, 1); mmiowb(); -- cgit v1.2.3-70-g09d2 From 65497dacd8104004f5115dcb2dfe1bf697154ce9 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:20 -0800 Subject: [PATCH] sky2: byteorder annotation Use byteorder annotation for hardware structures Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index f836b0322b1..420454a4472 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1746,31 +1746,31 @@ enum { */ struct sky2_tx_le { union { - u32 addr; + __le32 addr; struct { - u16 offset; - u16 start; + __le16 offset; + __le16 start; } csum __attribute((packed)); struct { - u16 size; - u16 rsvd; + __le16 size; + __le16 rsvd; } tso __attribute((packed)); } tx; - u16 length; /* also vlan tag or checksum start */ + __le16 length; /* also vlan tag or checksum start */ u8 ctrl; u8 opcode; } __attribute((packed)); struct sky2_rx_le { - u32 addr; - u16 length; + __le32 addr; + __le16 length; u8 ctrl; u8 opcode; } __attribute((packed));; struct sky2_status_le { - u32 status; /* also checksum */ - u16 length; /* also vlan tag */ + __le32 status; /* also checksum */ + __le16 length; /* also vlan tag */ u8 link; u8 opcode; } __attribute((packed)); -- cgit v1.2.3-70-g09d2 From af4ed7e6ba0cba388cf691f3a330089bd46e4d9e Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:21 -0800 Subject: [PATCH] sky2: remove pci-express hacks Eliminate special case tuning for PCI-Express. This code causes receive hangs and doesn't help performance much anyway. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 22 ++++------------------ drivers/net/sky2.h | 2 ++ 2 files changed, 6 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 52c7b188631..c6c3275fc5e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -651,12 +651,12 @@ static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len) } /* Setup Bus Memory Interface */ -static void sky2_qset(struct sky2_hw *hw, u16 q, u32 wm) +static void sky2_qset(struct sky2_hw *hw, u16 q) { sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET); sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT); sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON); - sky2_write32(hw, Q_ADDR(q, Q_WM), wm); + sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT); } /* Setup prefetch unit registers. This is the interface between @@ -921,7 +921,7 @@ static int sky2_rx_start(struct sky2_port *sky2) int i; sky2->rx_put = sky2->rx_next = 0; - sky2_qset(hw, rxq, is_pciex(hw) ? 0x80 : 0x600); + sky2_qset(hw, rxq); sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); @@ -1004,7 +1004,7 @@ static int sky2_up(struct net_device *dev) sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL), RB_RST_SET); - sky2_qset(hw, txqaddr[port], 0x600); + sky2_qset(hw, txqaddr[port]); if (hw->chip_id == CHIP_ID_YUKON_EC_U) sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); @@ -2148,20 +2148,6 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); } - if (is_pciex(hw)) { - u16 pctrl; - - /* change Max. Read Request Size to 2048 bytes */ - pci_read_config_word(hw->pdev, PEX_DEV_CTRL, &pctrl); - pctrl &= ~PEX_DC_MAX_RRS_MSK; - pctrl |= PEX_DC_MAX_RD_RQ_SIZE(4); - - - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - pci_write_config_word(hw->pdev, PEX_DEV_CTRL, pctrl); - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - } - sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); spin_lock_bh(&hw->phy_lock); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 420454a4472..930680f50fc 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -631,6 +631,8 @@ enum { BMU_CLR_RESET = BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR, BMU_OPER_INIT = BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | BMU_FIFO_ENA | BMU_OP_ON, + + BMU_WM_DEFAULT = 0x600, }; /* Tx BMU Control / Status Registers (Yukon-2) */ -- cgit v1.2.3-70-g09d2 From 50241c4c59453fae01555f67daa96d799d85b968 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:22 -0800 Subject: [PATCH] sky2: use pci_register_driver Switch to using pci_register_driver as per current convention. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c6c3275fc5e..aa79ad4376d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3106,7 +3106,7 @@ static struct pci_driver sky2_driver = { static int __init sky2_init_module(void) { - return pci_module_init(&sky2_driver); + return pci_register_driver(&sky2_driver); } static void __exit sky2_cleanup_module(void) -- cgit v1.2.3-70-g09d2 From 5f4f9dc113a7aedca072851f3a51cc563f8e143f Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 30 Nov 2005 11:45:23 -0800 Subject: [PATCH] sky2: update version number Update version number and print version in boot message. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index aa79ad4376d..a1884b472cd 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -58,7 +58,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.7" +#define DRV_VERSION "0.9" #define PFX DRV_NAME " " /* @@ -2948,8 +2948,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (err) goto err_out_iounmap; - printk(KERN_INFO PFX "addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n", - pci_resource_start(pdev, 0), pdev->irq, + printk(KERN_INFO PFX "v%s addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n", + DRV_VERSION, pci_resource_start(pdev, 0), pdev->irq, yukon_name[hw->chip_id - CHIP_ID_YUKON], hw->chip_id, hw->chip_rev); @@ -3120,3 +3120,4 @@ module_exit(sky2_cleanup_module); MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver"); MODULE_AUTHOR("Stephen Hemminger "); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); -- cgit v1.2.3-70-g09d2 From 09f5a214389fe467c2ff15aa2b85349bbde15bce Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:52 -0800 Subject: [PATCH] sk98lin: allow ethtool checksum on/off per port Allow control of checksumming parameters via ethtool. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/h/skdrv2nd.h | 1 + drivers/net/sk98lin/skethtool.c | 48 +++++++++++++++++++++++++++++ drivers/net/sk98lin/skge.c | 66 ++++++++++++++++++---------------------- 3 files changed, 79 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 9bdfde80c30..0ebafc88570 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -297,6 +297,7 @@ struct s_RxPort { RXD *pRxdRingTail; /* Tail of Rx rings */ RXD *pRxdRingPrev; /* descriptor given to BMU previously */ int RxdRingFree; /* # of free entrys */ + int RxCsum; /* use receive checksum hardware */ spinlock_t RxDesRingLock; /* serialize descriptor accesses */ int RxFillLimit; /* limit for buffers in ring */ SK_IOC HwAddr; /* bmu registers address */ diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c index b71769ae460..4265ed91a9c 100644 --- a/drivers/net/sk98lin/skethtool.c +++ b/drivers/net/sk98lin/skethtool.c @@ -539,6 +539,48 @@ static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *ep return ret ? -EIO : 0; } +/* Only Yukon supports checksum offload. */ +static int setScatterGather(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int setTxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 getRxCsum(struct net_device *dev) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + return pAC->RxPort[pNet->PortNr].RxCsum; +} + +static int setRxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + pAC->RxPort[pNet->PortNr].RxCsum = data != 0; + return 0; +} + struct ethtool_ops SkGeEthtoolOps = { .get_settings = getSettings, .set_settings = setSettings, @@ -551,4 +593,10 @@ struct ethtool_ops SkGeEthtoolOps = { .set_pauseparam = setPauseParams, .get_link = ethtool_op_get_link, .get_perm_addr = ethtool_op_get_perm_addr, + .get_sg = ethtool_op_get_sg, + .set_sg = setScatterGather, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = setTxCsum, + .get_rx_csum = getRxCsum, + .set_rx_csum = setRxCsum, }; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 107c5d97546..02143fa3ee5 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -2189,13 +2189,10 @@ rx_start: skb_put(pMsg, FrameLength); } /* frame > SK_COPY_TRESHOLD */ -#ifdef USE_SK_RX_CHECKSUM - pMsg->csum = pRxd->TcpSums; - pMsg->ip_summed = CHECKSUM_HW; -#else - pMsg->ip_summed = CHECKSUM_NONE; -#endif - + if (pRxPort->RxCsum) { + pMsg->csum = pRxd->TcpSums; + pMsg->ip_summed = CHECKSUM_HW; + } SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); ForRlmt = SK_RLMT_RX_PROTOCOL; @@ -4149,6 +4146,7 @@ SK_BOOL DualNet; Flags); break; case SK_DRV_NET_UP: /* SK_U32 PortIdx */ + { struct net_device *dev = pAC->dev[Param.Para32[0]]; /* action list 5 */ FromPort = Param.Para32[0]; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4232,22 +4230,12 @@ SK_BOOL DualNet; printk(" irq moderation: disabled\n"); -#ifdef SK_ZEROCOPY - if (pAC->ChipsetType) -#ifdef USE_SK_TX_CHECKSUM - printk(" scatter-gather: enabled\n"); -#else - printk(" tx-checksum: disabled\n"); -#endif - else - printk(" scatter-gather: disabled\n"); -#else - printk(" scatter-gather: disabled\n"); -#endif - -#ifndef USE_SK_RX_CHECKSUM - printk(" rx-checksum: disabled\n"); -#endif + printk(" scatter-gather: %s\n", + (dev->features & NETIF_F_SG) ? "enabled" : "disabled"); + printk(" tx-checksum: %s\n", + (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled"); + printk(" rx-checksum: %s\n", + pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled"); } else { DoPrintInterfaceChange = SK_TRUE; @@ -4262,9 +4250,9 @@ SK_BOOL DualNet; } /* Inform the world that link protocol is up. */ - netif_carrier_on(pAC->dev[Param.Para32[0]]); - + netif_carrier_on(dev); break; + } case SK_DRV_NET_DOWN: /* SK_U32 Reason */ /* action list 7 */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4871,15 +4859,18 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM + /* Use only if yukon hardware */ if (pAC->ChipsetType) { - /* Use only if yukon hardware */ - /* SK and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; #endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[0].RxCsum = 1; #endif + } pAC->Index = boards_found++; @@ -4944,14 +4935,17 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM if (pAC->ChipsetType) { - /* SG and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; #endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[1].RxCsum = 1; #endif + } if (register_netdev(dev)) { printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n"); -- cgit v1.2.3-70-g09d2 From 8f7a17d12a8cfd0ab4a50dded8390f6c44f1f205 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:53 -0800 Subject: [PATCH] sk98lin: remove redundant fields in device info Shrink size of per device data by removing redundant fields or things that are only used at boot up. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/h/skdrv2nd.h | 7 +--- drivers/net/sk98lin/skge.c | 71 +++++++++++++++++++--------------------- 2 files changed, 34 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 0ebafc88570..778d9e618eb 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -267,8 +267,6 @@ typedef struct s_DevNet DEV_NET; struct s_DevNet { int PortNr; int NetNr; - int Mtu; - int Up; SK_AC *pAC; }; @@ -390,12 +388,10 @@ struct s_AC { SK_IOC IoBase; /* register set of adapter */ int BoardLevel; /* level of active hw init (0-2) */ - char DeviceStr[80]; /* adapter string from vpd */ + SK_U32 AllocFlag; /* flag allocation of resources */ struct pci_dev *PciDev; /* for access to pci config space */ - SK_U32 PciDevId; /* pci device id */ struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ - char Name[30]; /* driver name */ int RxBufSize; /* length of receive buffers */ struct net_device_stats stats; /* linux 'netstat -i' statistics */ @@ -430,7 +426,6 @@ struct s_AC { DIM_INFO DynIrqModInfo; /* all data related to DIM */ /* Only for tests */ - int PortUp; int PortDown; int ChipsetType; /* Chipset family type * 0 == Genesis family support diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 02143fa3ee5..8338d497250 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -206,7 +206,6 @@ static void SkGeSetRxMode(struct SK_NET_DEVICE *dev); static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev); static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd); static void GetConfiguration(SK_AC*); -static void ProductStr(SK_AC*); static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*); static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*); static void FillRxRing(SK_AC*, RX_PORT*); @@ -321,7 +320,7 @@ int SkGeInitPCI(SK_AC *pAC) dev->mem_start = pci_resource_start (pdev, 0); pci_set_master(pdev); - if (pci_request_regions(pdev, pAC->Name) != 0) { + if (pci_request_regions(pdev, "sk98lin") != 0) { retval = 2; goto out_disable; } @@ -599,10 +598,10 @@ SK_BOOL DualNet; spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); if (pAC->GIni.GIMacsFound == 2) { - Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev); + Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev); } else if (pAC->GIni.GIMacsFound == 1) { Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, - pAC->Name, dev); + "sk98lin", dev); } else { printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n", pAC->GIni.GIMacsFound); @@ -1286,7 +1285,6 @@ struct SK_NET_DEVICE *dev) spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); pAC->MaxPorts++; - pNet->Up = 1; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, @@ -1416,7 +1414,6 @@ struct SK_NET_DEVICE *dev) sizeof(SK_PNMI_STRUCT_DATA)); pAC->MaxPorts--; - pNet->Up = 0; return (0); } /* SkGeClose */ @@ -2568,7 +2565,7 @@ unsigned long Flags; static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu) { DEV_NET *pNet; -DEV_NET *pOtherNet; +struct net_device *pOtherDev; SK_AC *pAC; unsigned long Flags; int i; @@ -2598,11 +2595,11 @@ SK_EVPARA EvPara; } #endif - pNet->Mtu = NewMtu; - pOtherNet = netdev_priv(pAC->dev[1 - pNet->NetNr]); - if ((pOtherNet->Mtu>1500) && (NewMtu<=1500) && (pOtherNet->Up==1)) { - return(0); - } + pOtherDev = pAC->dev[1 - pNet->NetNr]; + + if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500) + && (NewMtu <= 1500)) + return 0; pAC->RxBufSize = NewMtu + 32; dev->mtu = NewMtu; @@ -2764,7 +2761,8 @@ SK_EVPARA EvPara; EvPara.Para32[1] = -1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - if (pOtherNet->Up) { + if (netif_running(pOtherDev)) { + DEV_NET *pOtherNet = netdev_priv(pOtherDev); EvPara.Para32[0] = pOtherNet->PortNr; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); } @@ -2838,7 +2836,7 @@ unsigned long Flags; /* for spin lock */ pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; - if (pNet->Mtu <= 1500) { + if (dev->mtu <= 1500) { pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; } else { pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - @@ -3789,25 +3787,21 @@ int Capabilities[3][3] = * * Returns: N/A */ -static void ProductStr( -SK_AC *pAC /* pointer to adapter context */ +static inline int ProductStr( + SK_AC *pAC, /* pointer to adapter context */ + char *DeviceStr, /* result string */ + int StrLen /* length of the string */ ) { -int StrLen = 80; /* length of the string, defined in SK_AC */ char Keyword[] = VPD_NAME; /* vpd productname identifier */ int ReturnCode; /* return code from vpd_read */ unsigned long Flags; spin_lock_irqsave(&pAC->SlowPathLock, Flags); - ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr, - &StrLen); + ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - if (ReturnCode != 0) { - /* there was an error reading the vpd data */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR, - ("Error reading VPD data: %d\n", ReturnCode)); - pAC->DeviceStr[0] = '\0'; - } + + return ReturnCode; } /* ProductStr */ /***************************************************************************** @@ -4466,7 +4460,7 @@ SK_AC *pAc) /* pointer to adapter context */ pAC->DiagModeActive = DIAG_ACTIVE; if (pAC->BoardLevel > SK_INIT_DATA) { - if (pNet->Up) { + if (netif_running(pAC->dev[0])) { pAC->WasIfUp[0] = SK_TRUE; pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ DoPrintInterfaceChange = SK_FALSE; @@ -4476,7 +4470,7 @@ SK_AC *pAc) /* pointer to adapter context */ } if (pNet != netdev_priv(pAC->dev[1])) { pNet = netdev_priv(pAC->dev[1]); - if (pNet->Up) { + if (netif_running(pAC->dev[1])) { pAC->WasIfUp[1] = SK_TRUE; pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ DoPrintInterfaceChange = SK_FALSE; @@ -4802,6 +4796,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, struct net_device *dev = NULL; static int boards_found = 0; int error = -ENODEV; + char DeviceStr[80]; if (pci_enable_device(pdev)) goto out; @@ -4829,14 +4824,11 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, memset(pNet->pAC, 0, sizeof(SK_AC)); pAC = pNet->pAC; pAC->PciDev = pdev; - pAC->PciDevId = pdev->device; + pAC->dev[0] = dev; pAC->dev[1] = dev; - sprintf(pAC->Name, "SysKonnect SK-98xx"); pAC->CheckQueue = SK_FALSE; - pNet->Mtu = 1500; - pNet->Up = 0; dev->irq = pdev->irq; error = SkGeInitPCI(pAC); if (error) { @@ -4877,6 +4869,12 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, if (SkGeBoardInit(dev, pAC)) goto out_free_netdev; + /* Read Adapter name from VPD */ + if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) { + printk(KERN_ERR "sk98lin: Could not read VPD data.\n"); + goto out_free_resources; + } + /* Register net device */ if (register_netdev(dev)) { printk(KERN_ERR "sk98lin: Could not register device.\n"); @@ -4884,8 +4882,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, } /* Print adapter specific string from vpd */ - ProductStr(pAC); - printk("%s: %s\n", dev->name, pAC->DeviceStr); + printk("%s: %s\n", dev->name, DeviceStr); /* Print configuration settings */ printk(" PrefPort:%c RlmtMode:%s\n", @@ -4921,8 +4918,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, pNet->PortNr = 1; pNet->NetNr = 1; pNet->pAC = pAC; - pNet->Mtu = 1500; - pNet->Up = 0; dev->open = &SkGeOpen; dev->stop = &SkGeClose; @@ -4957,7 +4952,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, &pAC->Addr.Net[1].CurrentMacAddress, 6); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - printk("%s: %s\n", dev->name, pAC->DeviceStr); + printk("%s: %s\n", dev->name, DeviceStr); printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); } } @@ -5081,9 +5076,9 @@ static int skge_resume(struct pci_dev *pdev) pci_enable_device(pdev); pci_set_master(pdev); if (pAC->GIni.GIMacsFound == 2) - ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev); + ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev); else - ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev); + ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev); if (ret) { printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq); pAC->AllocFlag &= ~SK_ALLOC_IRQ; -- cgit v1.2.3-70-g09d2 From 35b8fcab1b293cadd54cdf9e9636cc576d2cad88 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:54 -0800 Subject: [PATCH] sk98lin: remove /proc interface Remove device specific proc interface. It doesn't handle renames correctly; it ain't worth fixing. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/Makefile | 3 +- drivers/net/sk98lin/skge.c | 42 +------ drivers/net/sk98lin/skproc.c | 265 ------------------------------------------- 3 files changed, 2 insertions(+), 308 deletions(-) delete mode 100644 drivers/net/sk98lin/skproc.c (limited to 'drivers') diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile index 7653d6e33aa..afd900d5d73 100644 --- a/drivers/net/sk98lin/Makefile +++ b/drivers/net/sk98lin/Makefile @@ -26,8 +26,7 @@ sk98lin-objs := \ skrlmt.o \ sktimer.o \ skvpd.o \ - skxmac2.o \ - skproc.o + skxmac2.o # DBGDEF = \ # -DDEBUG diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 8338d497250..e3bdb583600 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -110,7 +110,6 @@ #include #include #include -#include #include #include @@ -234,28 +233,6 @@ static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); * Extern Function Prototypes * ******************************************************************************/ -static const char SKRootName[] = "net/sk98lin"; -static struct proc_dir_entry *pSkRootDir; -extern struct file_operations sk_proc_fops; - -static inline void SkGeProcCreate(struct net_device *dev) -{ - struct proc_dir_entry *pe; - - if (pSkRootDir && - (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) { - pe->proc_fops = &sk_proc_fops; - pe->data = dev; - pe->owner = THIS_MODULE; - } -} - -static inline void SkGeProcRemove(struct net_device *dev) -{ - if (pSkRootDir) - remove_proc_entry(dev->name, pSkRootDir); -} - extern void SkDimEnableModerationIfNeeded(SK_AC *pAC); extern void SkDimDisplayModerationSettings(SK_AC *pAC); extern void SkDimStartModerationTimer(SK_AC *pAC); @@ -4898,8 +4875,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - SkGeProcCreate(dev); - pNet->PortNr = 0; pNet->NetNr = 0; @@ -4947,7 +4922,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, free_netdev(dev); pAC->dev[1] = pAC->dev[0]; } else { - SkGeProcCreate(dev); memcpy(&dev->dev_addr, &pAC->Addr.Net[1].CurrentMacAddress, 6); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); @@ -4988,10 +4962,7 @@ static void __devexit skge_remove_one(struct pci_dev *pdev) SK_AC *pAC = pNet->pAC; struct net_device *otherdev = pAC->dev[1]; - SkGeProcRemove(dev); unregister_netdev(dev); - if (otherdev != dev) - SkGeProcRemove(otherdev); SkGeYellowLED(pAC, pAC->IoBase, 0); @@ -5136,23 +5107,12 @@ static struct pci_driver skge_driver = { static int __init skge_init(void) { - int error; - - pSkRootDir = proc_mkdir(SKRootName, NULL); - if (pSkRootDir) - pSkRootDir->owner = THIS_MODULE; - - error = pci_register_driver(&skge_driver); - if (error) - remove_proc_entry(SKRootName, NULL); - return error; + return pci_module_init(&skge_driver); } static void __exit skge_exit(void) { pci_unregister_driver(&skge_driver); - remove_proc_entry(SKRootName, NULL); - } module_init(skge_init); diff --git a/drivers/net/sk98lin/skproc.c b/drivers/net/sk98lin/skproc.c deleted file mode 100644 index 5cece25c034..00000000000 --- a/drivers/net/sk98lin/skproc.c +++ /dev/null @@ -1,265 +0,0 @@ -/****************************************************************************** - * - * Name: skproc.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.11 $ - * Date: $Date: 2003/12/11 16:03:57 $ - * Purpose: Funktions to display statictic data - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2002 SysKonnect GmbH. - * (C)Copyright 2002-2003 Marvell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Created 22-Nov-2000 - * Author: Mirko Lindner (mlindner@syskonnect.de) - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ -#include -#include - -#include "h/skdrv1st.h" -#include "h/skdrv2nd.h" -#include "h/skversion.h" - -static int sk_seq_show(struct seq_file *seq, void *v); -static int sk_proc_open(struct inode *inode, struct file *file); - -struct file_operations sk_proc_fops = { - .owner = THIS_MODULE, - .open = sk_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - - -/***************************************************************************** - * - * sk_seq_show - show proc information of a particular adapter - * - * Description: - * This function fills the proc entry with statistic data about - * the ethernet device. It invokes the generic sk_gen_browse() to - * print out all items one per one. - * - * Returns: 0 - * - */ -static int sk_seq_show(struct seq_file *seq, void *v) -{ - struct net_device *dev = seq->private; - DEV_NET *pNet = netdev_priv(dev); - SK_AC *pAC = pNet->pAC; - SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct; - unsigned long Flags; - unsigned int Size; - char sens_msg[50]; - int t; - int i; - - /* NetIndex in GetStruct is now required, zero is only dummy */ - for (t=pAC->GIni.GIMacsFound; t > 0; t--) { - if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 1) - t--; - - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - Size = SK_PNMI_STRUCT_SIZE; -#ifdef SK_DIAG_SUPPORT - if (pAC->BoardLevel == SK_INIT_DATA) { - SK_MEMCPY(&(pAC->PnmiStruct), &(pAC->PnmiBackup), sizeof(SK_PNMI_STRUCT_DATA)); - if (pAC->DiagModeActive == DIAG_NOTACTIVE) { - pAC->Pnmi.DiagAttached = SK_DIAG_IDLE; - } - } else { - SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1); - } -#else - SkPnmiGetStruct(pAC, pAC->IoBase, - pPnmiStruct, &Size, t-1); -#endif - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - - if (pAC->dev[t-1] == dev) { - SK_PNMI_STAT *pPnmiStat = &pPnmiStruct->Stat[0]; - - seq_printf(seq, "\nDetailed statistic for device %s\n", - pAC->dev[t-1]->name); - seq_printf(seq, "=======================================\n"); - - /* Board statistics */ - seq_printf(seq, "\nBoard statistics\n\n"); - seq_printf(seq, "Active Port %c\n", - 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt. - Net[t-1].PrefPort]->PortNumber); - seq_printf(seq, "Preferred Port %c\n", - 'A' + pAC->Rlmt.Net[t-1].Port[pAC->Rlmt. - Net[t-1].PrefPort]->PortNumber); - - seq_printf(seq, "Bus speed (MHz) %d\n", - pPnmiStruct->BusSpeed); - - seq_printf(seq, "Bus width (Bit) %d\n", - pPnmiStruct->BusWidth); - seq_printf(seq, "Driver version %s\n", - VER_STRING); - seq_printf(seq, "Hardware revision v%d.%d\n", - (pAC->GIni.GIPciHwRev >> 4) & 0x0F, - pAC->GIni.GIPciHwRev & 0x0F); - - /* Print sensor informations */ - for (i=0; i < pAC->I2c.MaxSens; i ++) { - /* Check type */ - switch (pAC->I2c.SenTable[i].SenType) { - case 1: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (C)"); - seq_printf(seq, "%-25s %d.%02d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue / 10, - pAC->I2c.SenTable[i].SenValue % 10); - - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (F)"); - seq_printf(seq, "%-25s %d.%02d\n", - sens_msg, - ((((pAC->I2c.SenTable[i].SenValue) - *10)*9)/5 + 3200)/100, - ((((pAC->I2c.SenTable[i].SenValue) - *10)*9)/5 + 3200) % 10); - break; - case 2: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (V)"); - seq_printf(seq, "%-25s %d.%03d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue / 1000, - pAC->I2c.SenTable[i].SenValue % 1000); - break; - case 3: - strcpy(sens_msg, pAC->I2c.SenTable[i].SenDesc); - strcat(sens_msg, " (rpm)"); - seq_printf(seq, "%-25s %d\n", - sens_msg, - pAC->I2c.SenTable[i].SenValue); - break; - default: - break; - } - } - - /*Receive statistics */ - seq_printf(seq, "\nReceive statistics\n\n"); - - seq_printf(seq, "Received bytes %Lu\n", - (unsigned long long) pPnmiStat->StatRxOctetsOkCts); - seq_printf(seq, "Received packets %Lu\n", - (unsigned long long) pPnmiStat->StatRxOkCts); -#if 0 - if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && - pAC->HWRevision < 12) { - pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxShortsCts; - pPnmiStat->StatRxShortsCts = 0; - } -#endif - if (dev->mtu > 1500) - pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxTooLongCts; - - seq_printf(seq, "Receive errors %Lu\n", - (unsigned long long) pPnmiStruct->InErrorsCts); - seq_printf(seq, "Receive dropped %Lu\n", - (unsigned long long) pPnmiStruct->RxNoBufCts); - seq_printf(seq, "Received multicast %Lu\n", - (unsigned long long) pPnmiStat->StatRxMulticastOkCts); - seq_printf(seq, "Receive error types\n"); - seq_printf(seq, " length %Lu\n", - (unsigned long long) pPnmiStat->StatRxRuntCts); - seq_printf(seq, " buffer overflow %Lu\n", - (unsigned long long) pPnmiStat->StatRxFifoOverflowCts); - seq_printf(seq, " bad crc %Lu\n", - (unsigned long long) pPnmiStat->StatRxFcsCts); - seq_printf(seq, " framing %Lu\n", - (unsigned long long) pPnmiStat->StatRxFramingCts); - seq_printf(seq, " missed frames %Lu\n", - (unsigned long long) pPnmiStat->StatRxMissedCts); - - if (dev->mtu > 1500) - pPnmiStat->StatRxTooLongCts = 0; - - seq_printf(seq, " too long %Lu\n", - (unsigned long long) pPnmiStat->StatRxTooLongCts); - seq_printf(seq, " carrier extension %Lu\n", - (unsigned long long) pPnmiStat->StatRxCextCts); - seq_printf(seq, " too short %Lu\n", - (unsigned long long) pPnmiStat->StatRxShortsCts); - seq_printf(seq, " symbol %Lu\n", - (unsigned long long) pPnmiStat->StatRxSymbolCts); - seq_printf(seq, " LLC MAC size %Lu\n", - (unsigned long long) pPnmiStat->StatRxIRLengthCts); - seq_printf(seq, " carrier event %Lu\n", - (unsigned long long) pPnmiStat->StatRxCarrierCts); - seq_printf(seq, " jabber %Lu\n", - (unsigned long long) pPnmiStat->StatRxJabberCts); - - - /*Transmit statistics */ - seq_printf(seq, "\nTransmit statistics\n\n"); - - seq_printf(seq, "Transmited bytes %Lu\n", - (unsigned long long) pPnmiStat->StatTxOctetsOkCts); - seq_printf(seq, "Transmited packets %Lu\n", - (unsigned long long) pPnmiStat->StatTxOkCts); - seq_printf(seq, "Transmit errors %Lu\n", - (unsigned long long) pPnmiStat->StatTxSingleCollisionCts); - seq_printf(seq, "Transmit dropped %Lu\n", - (unsigned long long) pPnmiStruct->TxNoBufCts); - seq_printf(seq, "Transmit collisions %Lu\n", - (unsigned long long) pPnmiStat->StatTxSingleCollisionCts); - seq_printf(seq, "Transmit error types\n"); - seq_printf(seq, " excessive collision %ld\n", - pAC->stats.tx_aborted_errors); - seq_printf(seq, " carrier %Lu\n", - (unsigned long long) pPnmiStat->StatTxCarrierCts); - seq_printf(seq, " fifo underrun %Lu\n", - (unsigned long long) pPnmiStat->StatTxFifoUnderrunCts); - seq_printf(seq, " heartbeat %Lu\n", - (unsigned long long) pPnmiStat->StatTxCarrierCts); - seq_printf(seq, " window %ld\n", - pAC->stats.tx_window_errors); - - } - } - return 0; -} - -/***************************************************************************** - * - * sk_proc_open - register the show function when proc is open'ed - * - * Description: - * This function is called whenever a sk98lin proc file is queried. - * - * Returns: the return value of single_open() - * - */ -static int sk_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, sk_seq_show, PDE(inode)->data); -} - -/******************************************************************************* - * - * End of file - * - ******************************************************************************/ -- cgit v1.2.3-70-g09d2 From 0c49919a4706cc8c72ff381da7f3ae094e6df03a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:05 +0100 Subject: [PATCH] ixp2000: register netdevices last Do not register our netdevices with the kernel until we've actually finished setting up the hardware and microcode. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 216aad1911e..d9fd57d7a4b 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -300,15 +300,6 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, nds = __nds; set_port_admin_status = __set_port_admin_status; - for (i = 0; i < nds_count; i++) { - err = register_netdev(nds[i]); - if (err) { - while (--i >= 0) - unregister_netdev(nds[i]); - goto err_out; - } - } - for (i = 0; i < RX_BUF_COUNT; i++) { void *buf; @@ -317,7 +308,7 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, err = -ENOMEM; while (--i >= 0) free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); - goto err_unregister; + goto err_out; } rx_desc[i].buf_addr = virt_to_phys(buf); rx_desc[i].buf_length = PAGE_SIZE; @@ -355,7 +346,6 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, ixp2000_uengine_load(0, &ixp2400_rx); ixp2000_uengine_start_contexts(0, 0xff); - /* 256 entries, ring status set means 'empty', base address 0x0800. */ ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800); ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000); @@ -369,16 +359,25 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, ixp2000_uengine_load(1, &ixp2400_tx); ixp2000_uengine_start_contexts(1, 0xff); + for (i = 0; i < nds_count; i++) { + err = register_netdev(nds[i]); + if (err) { + while (--i >= 0) + unregister_netdev(nds[i]); + goto err_free_tx; + } + } + return 0; +err_free_tx: + for (i = 0; i < TX_BUF_COUNT; i++) + free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); + err_free_rx: for (i = 0; i < RX_BUF_COUNT; i++) free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); -err_unregister: - for (i = 0; i < nds_count; i++) - unregister_netdev(nds[i]); - err_out: return err; } @@ -389,6 +388,9 @@ void ixpdev_deinit(void) /* @@@ Flush out pending packets. */ + for (i = 0; i < nds_count; i++) + unregister_netdev(nds[i]); + ixp2000_uengine_stop_contexts(1, 0xff); ixp2000_uengine_stop_contexts(0, 0xff); ixp2000_uengine_reset(0x3); @@ -398,7 +400,4 @@ void ixpdev_deinit(void) for (i = 0; i < RX_BUF_COUNT; i++) free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); - - for (i = 0; i < nds_count; i++) - unregister_netdev(nds[i]); } -- cgit v1.2.3-70-g09d2 From 178f171da7f0ea5cfc1c45932680c81b3a8a0bd6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:10 +0100 Subject: [PATCH] pm3386: zero stats properly Zero our stats structure properly. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/pm3386.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index cf0681fb127..df960f1710f 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -238,7 +238,7 @@ void pm3386_get_stats(int port, struct net_device_stats *stats) while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001) ; - memset(stats, 0, sizeof(stats)); + memset(stats, 0, sizeof(*stats)); stats->rx_packets = pm3386_get_stat(port, 0x510); stats->tx_packets = pm3386_get_stat(port, 0x590); -- cgit v1.2.3-70-g09d2 From f48a8815f8535c62714cb596281d8480ba9e78ea Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:15 +0100 Subject: [PATCH] pm3386: remove unnecessary udelays Remove a number of unnecessary udelay() calls. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/pm3386.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index df960f1710f..b8a59b9bedb 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -166,9 +166,7 @@ void pm3386_init_port(int port) * Soft reset the EGMAC block. */ pm3386_port_reg_write(port, 0x301, 0x100, 0x8000); - udelay(10); pm3386_port_reg_write(port, 0x301, 0x100, 0x0000); - udelay(10); /* * Auto-sense autonegotiation status. @@ -191,15 +189,12 @@ void pm3386_init_port(int port) * Set autonegotiation parameters to 'no PAUSE, full duplex.' */ pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020); - udelay(10); /* * Enable and restart autonegotiation. */ pm3386_port_reg_write(port, 0x318, 0x100, 0x0003); - udelay(1000); pm3386_port_reg_write(port, 0x318, 0x100, 0x0002); - udelay(10); } void pm3386_get_mac(int port, u8 *mac) @@ -264,8 +259,6 @@ void pm3386_enable_rx(int port) temp = pm3386_port_reg_read(port, 0x303, 0x100); temp |= 0x1000; pm3386_port_reg_write(port, 0x303, 0x100, temp); - - udelay(10); } void pm3386_disable_rx(int port) @@ -275,8 +268,6 @@ void pm3386_disable_rx(int port) temp = pm3386_port_reg_read(port, 0x303, 0x100); temp &= 0xefff; pm3386_port_reg_write(port, 0x303, 0x100, temp); - - udelay(10); } void pm3386_enable_tx(int port) @@ -286,8 +277,6 @@ void pm3386_enable_tx(int port) temp = pm3386_port_reg_read(port, 0x303, 0x100); temp |= 0x4000; pm3386_port_reg_write(port, 0x303, 0x100, temp); - - udelay(10); } void pm3386_disable_tx(int port) @@ -297,8 +286,6 @@ void pm3386_disable_tx(int port) temp = pm3386_port_reg_read(port, 0x303, 0x100); temp &= 0xbfff; pm3386_port_reg_write(port, 0x303, 0x100, temp); - - udelay(10); } MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 6744a5069bdadd96324290d015103163a0f7a45b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:21 +0100 Subject: [PATCH] caleb/pm3386: include proper header files Make caleb.c and pm3386.c include their own header files, to catch incorrect prototype definitions. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/caleb.c | 1 + drivers/net/ixp2000/pm3386.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/caleb.c b/drivers/net/ixp2000/caleb.c index d70530adb1e..3595e107df2 100644 --- a/drivers/net/ixp2000/caleb.c +++ b/drivers/net/ixp2000/caleb.c @@ -13,6 +13,7 @@ #include #include #include +#include "caleb.h" #define CALEB_IDLO 0x00 #define CALEB_IDHI 0x01 diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index b8a59b9bedb..267b6bd5f79 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -14,6 +14,7 @@ #include #include #include +#include "pm3386.h" /* * Read from register 'reg' of PM3386 device 'pm'. -- cgit v1.2.3-70-g09d2 From ee61249468ec9bb8d032896ae2e8ba8a8b8c3972 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:25 +0100 Subject: [PATCH] ixp2000: use netif_rx_schedule_test The sky2 driver introduced netif_rx_schedule_test(). This is exactly what we need, so remove our local version of this function (which was called netif_rx_schedule_prep_notup) and use the generic one instead. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index d9fd57d7a4b..e9d978a1d6b 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -147,12 +147,6 @@ static int ixpdev_poll(struct net_device *dev, int *budget) return 0; } -/* @@@ Ugly hack. */ -static inline int netif_rx_schedule_prep_notup(struct net_device *dev) -{ - return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); -} - static void ixpdev_tx_complete(void) { int channel; @@ -206,7 +200,7 @@ static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ if (status & 0x00ff) { ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); - if (likely(netif_rx_schedule_prep_notup(nds[0]))) { + if (likely(netif_rx_schedule_test(nds[0]))) { __netif_rx_schedule(nds[0]); } else { printk(KERN_CRIT "ixp2000: irq while polling!!\n"); -- cgit v1.2.3-70-g09d2 From de287fd596e2e9ea9a29c397322d0a8b8a470cd1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:30 +0100 Subject: [PATCH] enp2611: don't check netif_running() in link status timer Even after an interface has gone !netif_running(), we still want to catch the 'carrier went down' event for our internal bookkeeping. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/enp2611.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index 3262e70ede6..f0cc23d423e 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -148,9 +148,6 @@ static void enp2611_check_link_status(unsigned long __dummy) struct net_device *dev; int status; - if (!netif_running(nds[i])) - continue; - dev = nds[i]; status = pm3386_is_link_up(i); -- cgit v1.2.3-70-g09d2 From c44185d4dcb92384c22e6c01dc09c25adae36a82 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:35 +0100 Subject: [PATCH] enp2611: use 'dev' in link status timer We assign nds[i] to a local variable 'dev', which we never use afterwards. Use the local variable instead. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/enp2611.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index f0cc23d423e..bc29dbeec31 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -151,12 +151,12 @@ static void enp2611_check_link_status(unsigned long __dummy) dev = nds[i]; status = pm3386_is_link_up(i); - if (status && !netif_carrier_ok(nds[i])) { + if (status && !netif_carrier_ok(dev)) { pm3386_enable_tx(i); caleb_enable_tx(i); - netif_carrier_on(nds[i]); - } else if (!status && netif_carrier_ok(nds[i])) { - netif_carrier_off(nds[i]); + netif_carrier_on(dev); + } else if (!status && netif_carrier_ok(dev)) { + netif_carrier_off(dev); caleb_disable_tx(i); pm3386_disable_tx(i); } -- cgit v1.2.3-70-g09d2 From 350f19632d18e808aa1f2ca96f2be86c67de67ff Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:40 +0100 Subject: [PATCH] enp2611: report link up/down events Report carrier going up/down. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/enp2611.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index bc29dbeec31..2542e3bacfb 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -152,10 +152,15 @@ static void enp2611_check_link_status(unsigned long __dummy) status = pm3386_is_link_up(i); if (status && !netif_carrier_ok(dev)) { + /* @@@ Should report autonegotiation status. */ + printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); + pm3386_enable_tx(i); caleb_enable_tx(i); netif_carrier_on(dev); } else if (!status && netif_carrier_ok(dev)) { + printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); + netif_carrier_off(dev); caleb_disable_tx(i); pm3386_disable_tx(i); -- cgit v1.2.3-70-g09d2 From 7ed98bfdea45dbdc66261660357659470935a03a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:43 +0100 Subject: [PATCH] ixp2000: report MAC addresses for each port on init After initialising, report the MAC address that we're using for each port. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index e9d978a1d6b..2ef8f8fa6c4 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -362,6 +362,14 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, } } + for (i = 0; i < nds_count; i++) { + printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), " + "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", nds[i]->name, i, + nds[i]->dev_addr[0], nds[i]->dev_addr[1], + nds[i]->dev_addr[2], nds[i]->dev_addr[3], + nds[i]->dev_addr[4], nds[i]->dev_addr[5]); + } + return 0; err_free_tx: -- cgit v1.2.3-70-g09d2 From 0b85c0ebde63a41d57b6214977ac2752bf5a086f Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:47 +0100 Subject: [PATCH] pm3386: add hook for setting MAC address When we reset the pm3386, it loses its internally stored MAC addresses that were programmed into it by the bootloader (and are used by the hardware for the generation of PAUSE frames.) Add a hook to allow setting these addresses so that we can program them back by hand. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/pm3386.c | 7 +++++++ drivers/net/ixp2000/pm3386.h | 1 + 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index 267b6bd5f79..870b486f5de 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -215,6 +215,13 @@ void pm3386_get_mac(int port, u8 *mac) mac[5] = (temp >> 8) & 0xff; } +void pm3386_set_mac(int port, u8 *mac) +{ + pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]); + pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]); + pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]); +} + static u32 pm3386_get_stat(int port, u16 base) { u32 value; diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h index 55ecb183421..117f50afcde 100644 --- a/drivers/net/ixp2000/pm3386.h +++ b/drivers/net/ixp2000/pm3386.h @@ -15,6 +15,7 @@ void pm3386_reset(void); void pm3386_init_port(int port); void pm3386_get_mac(int port, u8 *mac); +void pm3386_set_mac(int port, u8 *mac); void pm3386_get_stats(int port, struct net_device_stats *stats); int pm3386_is_link_up(int port); void pm3386_enable_rx(int port); -- cgit v1.2.3-70-g09d2 From df86550602f320d28fdaeb577c25f9821525bfa0 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:51 +0100 Subject: [PATCH] pm3386: add hook for setting carrier Add a pm3386 hook for disabling/enabling the SERDES carrier, so that we can disable it when the interface is administratively downed, and enable it when it is upped. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/pm3386.c | 5 +++++ drivers/net/ixp2000/pm3386.h | 1 + 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index 870b486f5de..ec70b1d553e 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -250,6 +250,11 @@ void pm3386_get_stats(int port, struct net_device_stats *stats) /* @@@ Add other stats. */ } +void pm3386_set_carrier(int port, int state) +{ + pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000); +} + int pm3386_is_link_up(int port) { u16 temp; diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h index 117f50afcde..fe92bb056ac 100644 --- a/drivers/net/ixp2000/pm3386.h +++ b/drivers/net/ixp2000/pm3386.h @@ -17,6 +17,7 @@ void pm3386_init_port(int port); void pm3386_get_mac(int port, u8 *mac); void pm3386_set_mac(int port, u8 *mac); void pm3386_get_stats(int port, struct net_device_stats *stats); +void pm3386_set_carrier(int port, int state); int pm3386_is_link_up(int port); void pm3386_enable_rx(int port); void pm3386_disable_rx(int port); -- cgit v1.2.3-70-g09d2 From c6e429bdd6f0142558896e29c21a526c1ffdd1f3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:55 +0100 Subject: [PATCH] pm3386: implement reset Implement pm3386 reset. A reset zeroes out the internally stored MAC addresses, so we need to save and reload them by hand. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/pm3386.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c index ec70b1d553e..5c7ab756405 100644 --- a/drivers/net/ixp2000/pm3386.c +++ b/drivers/net/ixp2000/pm3386.c @@ -89,7 +89,37 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) void pm3386_reset(void) { - /* @@@ Implement me. */ + u8 mac[3][6]; + + /* Save programmed MAC addresses. */ + pm3386_get_mac(0, mac[0]); + pm3386_get_mac(1, mac[1]); + pm3386_get_mac(2, mac[2]); + + /* Assert analog and digital reset. */ + pm3386_reg_write(0, 0x002, 0x0060); + pm3386_reg_write(1, 0x002, 0x0060); + mdelay(1); + + /* Deassert analog reset. */ + pm3386_reg_write(0, 0x002, 0x0062); + pm3386_reg_write(1, 0x002, 0x0062); + mdelay(10); + + /* Deassert digital reset. */ + pm3386_reg_write(0, 0x002, 0x0063); + pm3386_reg_write(1, 0x002, 0x0063); + mdelay(10); + + /* Restore programmed MAC addresses. */ + pm3386_set_mac(0, mac[0]); + pm3386_set_mac(1, mac[1]); + pm3386_set_mac(2, mac[2]); + + /* Disable carrier on all ports. */ + pm3386_set_carrier(0, 0); + pm3386_set_carrier(1, 0); + pm3386_set_carrier(2, 0); } static u16 swaph(u16 x) -- cgit v1.2.3-70-g09d2 From cffbfcaf00c4a36592fabd54ae9f960b552322b6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:49:59 +0100 Subject: [PATCH] enp2611: disable/enable SERDES carrier on interface down/up Disable/enable the SERDES carrier when an interface is administratively downed/upped. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/enp2611.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c index 2542e3bacfb..d82651a97ba 100644 --- a/drivers/net/ixp2000/enp2611.c +++ b/drivers/net/ixp2000/enp2611.c @@ -175,10 +175,15 @@ static void enp2611_set_port_admin_status(int port, int up) { if (up) { caleb_enable_rx(port); + + pm3386_set_carrier(port, 1); pm3386_enable_rx(port); } else { caleb_disable_tx(port); pm3386_disable_tx(port); + /* @@@ Flush out pending packets. */ + pm3386_set_carrier(port, 0); + pm3386_disable_rx(port); caleb_disable_rx(port); } -- cgit v1.2.3-70-g09d2 From 8ce51d69b755c39e714826899631629209896b70 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:50:04 +0100 Subject: [PATCH] ixp2000: add netpoll support Add netpoll support to the ixp2000 driver. Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 2ef8f8fa6c4..0f7b8ab62d7 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -218,6 +218,15 @@ static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void ixpdev_poll_controller(struct net_device *dev) +{ + disable_irq(IRQ_IXP2000_THDA0); + ixpdev_interrupt(IRQ_IXP2000_THDA0, dev, NULL); + enable_irq(IRQ_IXP2000_THDA0); +} +#endif + static int ixpdev_open(struct net_device *dev) { struct ixpdev_priv *ip = netdev_priv(dev); @@ -268,6 +277,9 @@ struct net_device *ixpdev_alloc(int channel, int sizeof_priv) dev->poll = ixpdev_poll; dev->open = ixpdev_open; dev->stop = ixpdev_close; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = ixpdev_poll_controller; +#endif dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; dev->weight = 64; -- cgit v1.2.3-70-g09d2 From 127477840b9fd205958203648b9fa89860d69a43 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 23 Nov 2005 12:50:08 +0100 Subject: [PATCH] ixp2000: add driver version, bump version to 0.2 Signed-off-by: Lennert Buytenhek Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 0f7b8ab62d7..52c5a1c5099 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -24,6 +24,8 @@ #include "ixpdev_priv.h" #include "ixpdev.h" +#define DRV_MODULE_VERSION "0.2" + static int nds_count; static struct net_device **nds; static int nds_open; @@ -302,6 +304,8 @@ int ixpdev_init(int __nds_count, struct net_device **__nds, __too_many_rx_or_tx_buffers(); } + printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION); + nds_count = __nds_count; nds = __nds; set_port_admin_status = __set_port_admin_status; -- cgit v1.2.3-70-g09d2 From 98ac62defe529d04a192688f40d801a2d8fbcf98 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 28 Nov 2005 10:06:23 +0100 Subject: [PATCH] mark several libata datastructures const Hi, the patch below marks several libata (and libata-driver) structures const so that they end up in the .rodata segment and don't false-share cachelines with things that get dirtied often. Signed-off-by: Arjan van de Ven Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 2 +- drivers/scsi/libata-core.c | 4 ++-- drivers/scsi/libata-scsi.c | 6 +++--- drivers/scsi/sata_mv.c | 2 +- drivers/scsi/sata_promise.c | 2 +- drivers/scsi/sata_qstor.c | 2 +- drivers/scsi/sata_sil.c | 2 +- drivers/scsi/sata_sx4.c | 2 +- 8 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 83467a05dc8..cfbdd3f071b 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -243,7 +243,7 @@ static const struct ata_port_operations ahci_ops = { .port_stop = ahci_port_stop, }; -static struct ata_port_info ahci_port_info[] = { +static const struct ata_port_info ahci_port_info[] = { /* board_ahci */ { .sht = &ahci_sht, diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9f27e8d0e77..11ed6fa2709 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -605,7 +605,7 @@ void ata_rwcmd_protocol(struct ata_queued_cmd *qc) tf->command = ata_rw_cmds[index + lba48 + write]; } -static const char * xfer_mode_str[] = { +static const char * const xfer_mode_str[] = { "UDMA/16", "UDMA/25", "UDMA/33", @@ -2083,7 +2083,7 @@ static void ata_pr_blacklisted(const struct ata_port *ap, ap->id, dev->devno); } -static const char * ata_dma_blacklist [] = { +static const char * const ata_dma_blacklist [] = { "WDC AC11000H", "WDC AC22100H", "WDC AC32500H", diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 3b4ca55a333..b21b8854072 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -418,7 +418,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, int i; /* Based on the 3ware driver translation table */ - static unsigned char sense_table[][4] = { + static const unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command /* BBD|ECC|ID */ @@ -449,7 +449,7 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; - static unsigned char stat_table[][4] = { + static const unsigned char stat_table[][4] = { /* Must be first because BUSY means no other bits valid */ {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault @@ -1532,7 +1532,7 @@ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, return 0; } -static const char *inq_83_str = "Linux ATA-SCSI simulator"; +static const char * const inq_83_str = "Linux ATA-SCSI simulator"; /** * ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ab7432a5778..c94176693d1 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -430,7 +430,7 @@ static const struct ata_port_operations mv6_ops = { .host_stop = mv_host_stop, }; -static struct ata_port_info mv_port_info[] = { +static const struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, .host_flags = MV_COMMON_FLAGS, diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 25e56fb9ad9..02089069b0f 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -158,7 +158,7 @@ static const struct ata_port_operations pdc_pata_ops = { .host_stop = ata_pci_host_stop, }; -static struct ata_port_info pdc_port_info[] = { +static const struct ata_port_info pdc_port_info[] = { /* board_2037x */ { .sht = &pdc_ata_sht, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index a8987f5ff5c..6b9c3ae07cb 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -170,7 +170,7 @@ static const struct ata_port_operations qs_ata_ops = { .bmdma_status = qs_bmdma_status, }; -static struct ata_port_info qs_port_info[] = { +static const struct ata_port_info qs_port_info[] = { /* board_2068_idx */ { .sht = &qs_ata_sht, diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 36091868560..d2053487c73 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -176,7 +176,7 @@ static const struct ata_port_operations sil_ops = { .host_stop = ata_pci_host_stop, }; -static struct ata_port_info sil_port_info[] = { +static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { .sht = &sil_sht, diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index dcc3ad9a9d6..7c4b5357551 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -215,7 +215,7 @@ static const struct ata_port_operations pdc_20621_ops = { .host_stop = pdc20621_host_stop, }; -static struct ata_port_info pdc_port_info[] = { +static const struct ata_port_info pdc_port_info[] = { /* board_20621 */ { .sht = &pdc_sata_sht, -- cgit v1.2.3-70-g09d2 From f89b23217372ed9bdba8804c1616d445402d1e05 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Fri, 11 Nov 2005 11:41:42 -0500 Subject: [PATCH] airo.c: add support for IW_ENCODE_TEMP (i.e. xsupplicant) Hello Jeff, this patch changes causes the airo driver to not reset the card when a temporary WEP key is set, when the IW_ENCODE_TEMP flag is used. This is needed for xsupplicant as 802.1x, LEAP, etc. change WEP keys frequently after authentication and resetting the card causes infinite reauthentication. Javier and Jean agree with the patch, Javier suggested I send this to you, can you apply this? Thanks. Signed-off-by: Dan Streetman Signed-off-by: Jeff Garzik --- drivers/net/wireless/airo.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 340ab4ee4b6..6c4aa7b6a21 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4037,7 +4037,7 @@ static int PC4500_writerid(struct airo_info *ai, u16 rid, Cmd cmd; Resp rsp; - if (test_bit(FLAG_ENABLED, &ai->flags)) + if (test_bit(FLAG_ENABLED, &ai->flags) && (RID_WEP_TEMP != rid)) printk(KERN_ERR "%s: MAC should be disabled (rid=%04x)\n", __FUNCTION__, rid); @@ -5093,9 +5093,9 @@ static int set_wep_key(struct airo_info *ai, u16 index, printk(KERN_INFO "Setting key %d\n", index); } - disable_MAC(ai, lock); + if (perm) disable_MAC(ai, lock); writeWepKeyRid(ai, &wkr, perm, lock); - enable_MAC(ai, &rsp, lock); + if (perm) enable_MAC(ai, &rsp, lock); return 0; } @@ -6170,6 +6170,8 @@ static int airo_set_encode(struct net_device *dev, { struct airo_info *local = dev->priv; CapabilityRid cap_rid; /* Card capability info */ + int perm = ( dwrq->flags & IW_ENCODE_TEMP ? 0 : 1 ); + u16 currentAuthType = local->config.authType; /* Is WEP supported ? */ readCapabilityRid(local, &cap_rid, 1); @@ -6212,7 +6214,7 @@ static int airo_set_encode(struct net_device *dev, /* Copy the key in the driver */ memcpy(key.key, extra, dwrq->length); /* Send the key to the card */ - set_wep_key(local, index, key.key, key.len, 1, 1); + set_wep_key(local, index, key.key, key.len, perm, 1); } /* WE specify that if a valid key is set, encryption * should be enabled (user may turn it off later) @@ -6220,13 +6222,12 @@ static int airo_set_encode(struct net_device *dev, if((index == current_index) && (key.len > 0) && (local->config.authType == AUTH_OPEN)) { local->config.authType = AUTH_ENCRYPT; - set_bit (FLAG_COMMIT, &local->flags); } } else { /* Do we want to just set the transmit key index ? */ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) { - set_wep_key(local, index, NULL, 0, 1, 1); + set_wep_key(local, index, NULL, 0, perm, 1); } else /* Don't complain if only change the mode */ if(!dwrq->flags & IW_ENCODE_MODE) { @@ -6241,7 +6242,7 @@ static int airo_set_encode(struct net_device *dev, if(dwrq->flags & IW_ENCODE_OPEN) local->config.authType = AUTH_ENCRYPT; // Only Wep /* Commit the changes to flags if needed */ - if(dwrq->flags & IW_ENCODE_MODE) + if (local->config.authType != currentAuthType) set_bit (FLAG_COMMIT, &local->flags); return -EINPROGRESS; /* Call commit handler */ } -- cgit v1.2.3-70-g09d2 From 001893cda2f280ab882164737a0b608208524809 Mon Sep 17 00:00:00 2001 From: Alexander Clouter Date: Thu, 1 Dec 2005 01:09:25 -0800 Subject: [PATCH] cpufreq_conservative/ondemand: invert meaning of 'ignore nice' The use of the 'ignore_nice' sysfs file is confusing to anyone using it. This removes the sysfs file 'ignore_nice' and in its place creates a 'ignore_nice_load' entry that defaults to '0'; meaning nice'd processes _are_ counted towards the 'business' calculation. WARNING: this obvious breaks any userland tools that expected ignore_nice' to exist, to draw attention to this fact it was concluded on the mailing list that the entry should be removed altogether so the userland app breaks and so the author can build simple to detect workaround. Having said that it seems currently very few tools even make use of this functionality; all I could find was a Gentoo Wiki entry. Signed-off-by: Alexander Clouter Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 10 +++++----- drivers/cpufreq/cpufreq_ondemand.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 2ed5c4363b5..39543a2bed0 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -93,7 +93,7 @@ static inline unsigned int get_cpu_idle_time(unsigned int cpu) { return kstat_cpu(cpu).cpustat.idle + kstat_cpu(cpu).cpustat.iowait + - ( !dbs_tuners_ins.ignore_nice ? + ( dbs_tuners_ins.ignore_nice ? kstat_cpu(cpu).cpustat.nice : 0); } @@ -127,7 +127,7 @@ show_one(sampling_rate, sampling_rate); show_one(sampling_down_factor, sampling_down_factor); show_one(up_threshold, up_threshold); show_one(down_threshold, down_threshold); -show_one(ignore_nice, ignore_nice); +show_one(ignore_nice_load, ignore_nice); show_one(freq_step, freq_step); static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, @@ -207,7 +207,7 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused, return count; } -static ssize_t store_ignore_nice(struct cpufreq_policy *policy, +static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int input; @@ -272,7 +272,7 @@ define_one_rw(sampling_rate); define_one_rw(sampling_down_factor); define_one_rw(up_threshold); define_one_rw(down_threshold); -define_one_rw(ignore_nice); +define_one_rw(ignore_nice_load); define_one_rw(freq_step); static struct attribute * dbs_attributes[] = { @@ -282,7 +282,7 @@ static struct attribute * dbs_attributes[] = { &sampling_down_factor.attr, &up_threshold.attr, &down_threshold.attr, - &ignore_nice.attr, + &ignore_nice_load.attr, &freq_step.attr, NULL }; diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 17741111246..e69fd8dd1f1 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -89,7 +89,7 @@ static inline unsigned int get_cpu_idle_time(unsigned int cpu) { return kstat_cpu(cpu).cpustat.idle + kstat_cpu(cpu).cpustat.iowait + - ( !dbs_tuners_ins.ignore_nice ? + ( dbs_tuners_ins.ignore_nice ? kstat_cpu(cpu).cpustat.nice : 0); } @@ -122,7 +122,7 @@ static ssize_t show_##file_name \ show_one(sampling_rate, sampling_rate); show_one(sampling_down_factor, sampling_down_factor); show_one(up_threshold, up_threshold); -show_one(ignore_nice, ignore_nice); +show_one(ignore_nice_load, ignore_nice); static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, const char *buf, size_t count) @@ -182,7 +182,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, return count; } -static ssize_t store_ignore_nice(struct cpufreq_policy *policy, +static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int input; @@ -223,7 +223,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name) define_one_rw(sampling_rate); define_one_rw(sampling_down_factor); define_one_rw(up_threshold); -define_one_rw(ignore_nice); +define_one_rw(ignore_nice_load); static struct attribute * dbs_attributes[] = { &sampling_rate_max.attr, @@ -231,7 +231,7 @@ static struct attribute * dbs_attributes[] = { &sampling_rate.attr, &sampling_down_factor.attr, &up_threshold.attr, - &ignore_nice.attr, + &ignore_nice_load.attr, NULL }; -- cgit v1.2.3-70-g09d2 From c75f4742e2306a319baaa556e53209d4e7c47f0d Mon Sep 17 00:00:00 2001 From: Takis Date: Thu, 1 Dec 2005 01:41:45 -0800 Subject: [PATCH] ipw2200: kzalloc conversion and Kconfig dependency fix - Use kzalloc for IPW2200 - Fix config dependency for IPW2200 Signed-off-by: Panagiotis Issaris Cc: James Ketrenos Cc: Yi Zhu Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/Kconfig | 2 +- drivers/net/wireless/ipw2200.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 00e55165b76..d94421c7426 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -192,7 +192,7 @@ config IPW_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on IEEE80211 && PCI + depends on NET_RADIO && IEEE80211 && PCI select FW_LOADER ---help--- A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 5e7c7e944c9..0e47b23605f 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -4944,12 +4944,11 @@ static struct ipw_rx_queue *ipw_rx_queue_alloc(struct ipw_priv *priv) struct ipw_rx_queue *rxq; int i; - rxq = (struct ipw_rx_queue *)kmalloc(sizeof(*rxq), GFP_KERNEL); + rxq = kzalloc(sizeof(*rxq), GFP_KERNEL); if (unlikely(!rxq)) { IPW_ERROR("memory allocation failed\n"); return NULL; } - memset(rxq, 0, sizeof(*rxq)); spin_lock_init(&rxq->lock); INIT_LIST_HEAD(&rxq->rx_free); INIT_LIST_HEAD(&rxq->rx_used); -- cgit v1.2.3-70-g09d2 From 0f52bf905884c6dd7f994c9e2f533b2c02f0bd4b Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Thu, 1 Dec 2005 01:41:46 -0800 Subject: [PATCH] Duplicate IPW_DEBUG option for ipw2100 and 2200 There are currently two IPW_DEBUG options in drivers/net/wireless/Kconfig (one for ipw2100 and one for ipw2200). The attached patch splits it into IPW2100_DEBUG and IPW2200_DEBUG. Signed-off-by: Brice Goglin Cc: "James P. Ketrenos" Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/wireless/Kconfig | 4 ++-- drivers/net/wireless/ipw2100.c | 40 ++++++++++++++++++++-------------------- drivers/net/wireless/ipw2100.h | 2 +- drivers/net/wireless/ipw2200.c | 18 +++++++++--------- drivers/net/wireless/ipw2200.h | 6 +++--- 5 files changed, 35 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index d94421c7426..24f7967aab6 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -173,7 +173,7 @@ config IPW2100_MONITOR promiscuous mode via the Wireless Tool's Monitor mode. While in this mode, no packets can be sent. -config IPW_DEBUG +config IPW2100_DEBUG bool "Enable full debugging output in IPW2100 module." depends on IPW2100 ---help--- @@ -217,7 +217,7 @@ config IPW2200 say M here and read . The module will be called ipw2200.ko. -config IPW_DEBUG +config IPW2200_DEBUG bool "Enable full debugging output in IPW2200 module." depends on IPW2200 ---help--- diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 77d2a21d4cd..44cd3fcd157 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -175,7 +175,7 @@ that only one external action is invoked at a time. #define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation" /* Debugging stuff */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */ #endif @@ -208,7 +208,7 @@ MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); static u32 ipw2100_debug_level = IPW_DL_NONE; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define IPW_DEBUG(level, message...) \ do { \ if (ipw2100_debug_level & (level)) { \ @@ -219,9 +219,9 @@ do { \ } while (0) #else #define IPW_DEBUG(level, message...) do {} while (0) -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static const char *command_types[] = { "undefined", "unused", /* HOST_ATTENTION */ @@ -2081,7 +2081,7 @@ static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) priv->status &= ~STATUS_SCANNING; } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG #define IPW2100_HANDLER(v, f) { v, f, # v } struct ipw2100_status_indicator { int status; @@ -2094,7 +2094,7 @@ struct ipw2100_status_indicator { int status; void (*cb) (struct ipw2100_priv * priv, u32 status); }; -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) { @@ -2149,7 +2149,7 @@ static void isr_status_change(struct ipw2100_priv *priv, int status) static void isr_rx_complete_command(struct ipw2100_priv *priv, struct ipw2100_cmd_header *cmd) { -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { IPW_DEBUG_HC("Command completed '%s (%d)'\n", command_types[cmd->host_command_reg], @@ -2167,7 +2167,7 @@ static void isr_rx_complete_command(struct ipw2100_priv *priv, wake_up_interruptible(&priv->wait_command_queue); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static const char *frame_types[] = { "COMMAND_STATUS_VAL", "STATUS_CHANGE_VAL", @@ -2290,7 +2290,7 @@ static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) { -#ifdef CONFIG_IPW_DEBUG_C3 +#ifdef CONFIG_IPW2100_DEBUG_C3 struct ipw2100_status *status = &priv->status_queue.drv[i]; u32 match, reg; int j; @@ -2312,7 +2312,7 @@ static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) } #endif -#ifdef CONFIG_IPW_DEBUG_C3 +#ifdef CONFIG_IPW2100_DEBUG_C3 /* Halt the fimrware so we can get a good image */ write_register(priv->net_dev, IPW_REG_RESET_REG, IPW_AUX_HOST_RESET_REG_STOP_MASTER); @@ -2716,7 +2716,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) list_del(element); DEC_STAT(&priv->fw_pend_stat); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG { int i = txq->oldest; IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i, @@ -2782,7 +2782,7 @@ static inline int __ipw2100_tx_process(struct ipw2100_priv *priv) "something else: ids %d=%d.\n", priv->net_dev->name, txq->oldest, packet->index); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (packet->info.c_struct.cmd->host_command_reg < sizeof(command_types) / sizeof(*command_types)) IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n", @@ -2975,7 +2975,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv) IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n", packet->index, tbd->host_addr, tbd->buf_length); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (packet->info.d_struct.txb->nr_frags > 1) IPW_DEBUG_FRAG("fragment Tx: %d frames\n", packet->info.d_struct.txb->nr_frags); @@ -3827,7 +3827,7 @@ static ssize_t show_stats(struct device *d, struct device_attribute *attr, priv->rx_interrupts, priv->inta_other); out += sprintf(out, "firmware resets: %d\n", priv->resets); out += sprintf(out, "firmware hangs: %d\n", priv->hangs); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG out += sprintf(out, "packet mismatch image: %s\n", priv->snapshot[0] ? "YES" : "NO"); #endif @@ -3982,7 +3982,7 @@ static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr, static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG static ssize_t show_debug_level(struct device_driver *d, char *buf) { return sprintf(buf, "0x%08X\n", ipw2100_debug_level); @@ -4011,7 +4011,7 @@ static ssize_t store_debug_level(struct device_driver *d, static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level, store_debug_level); -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2100_DEBUG */ static ssize_t show_fatal_error(struct device *d, struct device_attribute *attr, char *buf) @@ -4937,7 +4937,7 @@ static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid, }; int err; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (bssid != NULL) IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n", bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], @@ -6858,7 +6858,7 @@ static int __init ipw2100_init(void) ret = pci_module_init(&ipw2100_pci_driver); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG ipw2100_debug_level = debug; driver_create_file(&ipw2100_pci_driver.driver, &driver_attr_debug_level); @@ -6873,7 +6873,7 @@ static int __init ipw2100_init(void) static void __exit ipw2100_exit(void) { /* FIXME: IPG: check that we have no instances of the devices open */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG driver_remove_file(&ipw2100_pci_driver.driver, &driver_attr_debug_level); #endif @@ -8558,7 +8558,7 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) quality = min(beacon_qual, min(tx_qual, rssi_qual)); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2100_DEBUG if (beacon_qual == quality) IPW_DEBUG_WX("Quality clamped by Missed Beacons\n"); else if (tx_qual == quality) diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 7c65b10bb16..f6c51441fa8 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -73,7 +73,7 @@ struct ipw2100_rx_packet; * you simply need to add your entry to the ipw2100_debug_levels array. * * If you do not see debug_level in /proc/net/ipw2100 then you do not have - * CONFIG_IPW_DEBUG defined in your kernel configuration + * CONFIG_IPW2100_DEBUG defined in your kernel configuration * */ diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 0e47b23605f..cd034b79bc9 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -462,7 +462,7 @@ static inline void ipw_disable_interrupts(struct ipw_priv *priv) ipw_write32(priv, IPW_INTA_MASK_R, ~IPW_INTA_MASK_ALL); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static char *ipw_error_desc(u32 val) { switch (val) { @@ -1235,7 +1235,7 @@ static ssize_t store_scan_age(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { struct ipw_priv *priv = dev_get_drvdata(d); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG struct net_device *dev = priv->net_dev; #endif char buffer[] = "00000000"; @@ -1754,7 +1754,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) IPW_ERROR("Firmware error detected. Restarting.\n"); if (priv->error) { IPW_ERROR("Sysfs 'error' log already exists.\n"); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (ipw_debug_level & IPW_DL_FW_ERRORS) { struct ipw_fw_error *error = ipw_alloc_error_log(priv); @@ -1770,7 +1770,7 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) else IPW_ERROR("Error allocating sysfs 'error' " "log.\n"); -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (ipw_debug_level & IPW_DL_FW_ERRORS) ipw_dump_error_log(priv, priv->error); #endif @@ -3778,7 +3778,7 @@ static const struct ipw_status_code ipw_status_codes[] = { {0x2E, "Cipher suite is rejected per security policy"}, }; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static const char *ipw_get_status_code(u16 status) { int i; @@ -4250,7 +4250,7 @@ static inline void ipw_rx_notification(struct ipw_priv *priv, if (priv-> status & (STATUS_ASSOCIATED | STATUS_AUTH)) { -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG struct notif_authenticate *auth = ¬if->u.auth; IPW_DEBUG(IPW_DL_NOTIF | @@ -5827,7 +5827,7 @@ static void ipw_bg_adhoc_check(void *data) up(&priv->sem); } -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG static void ipw_debug_config(struct ipw_priv *priv) { IPW_DEBUG_INFO("Scan completed, no valid APs matched " @@ -7814,7 +7814,7 @@ static void ipw_rx(struct ipw_priv *priv) while (i != r) { rxb = priv->rxq->queue[i]; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG if (unlikely(rxb == NULL)) { printk(KERN_CRIT "Queue not allocated!\n"); break; @@ -10955,7 +10955,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) priv->net_dev = net_dev; priv->pci_dev = pdev; -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG ipw_debug_level = debug; #endif spin_lock_init(&priv->lock); diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index 1c98db0652c..e65620a4d79 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1301,14 +1301,14 @@ struct ipw_priv { /* debug macros */ -#ifdef CONFIG_IPW_DEBUG +#ifdef CONFIG_IPW2200_DEBUG #define IPW_DEBUG(level, fmt, args...) \ do { if (ipw_debug_level & (level)) \ printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) #else #define IPW_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IPW_DEBUG */ +#endif /* CONFIG_IPW2200_DEBUG */ /* * To use the debug system; @@ -1332,7 +1332,7 @@ do { if (ipw_debug_level & (level)) \ * you simply need to add your entry to the ipw_debug_levels array. * * If you do not see debug_level in /proc/net/ipw then you do not have - * CONFIG_IPW_DEBUG defined in your kernel configuration + * CONFIG_IPW2200_DEBUG defined in your kernel configuration * */ -- cgit v1.2.3-70-g09d2 From d359b6ff6a79e250422fdfa991b36d37c286eda1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 1 Dec 2005 11:12:47 -0800 Subject: [PATCH] ixp2000: change netif_schedule_test to __netif_schedule_prep Sky2 update changed name of netif_schedule_test to __netif_schedule_prep Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/ixp2000/ixpdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 52c5a1c5099..09f03f493be 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -202,7 +202,7 @@ static irqreturn_t ixpdev_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ if (status & 0x00ff) { ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); - if (likely(netif_rx_schedule_test(nds[0]))) { + if (likely(__netif_rx_schedule_prep(nds[0]))) { __netif_rx_schedule(nds[0]); } else { printk(KERN_CRIT "ixp2000: irq while polling!!\n"); -- cgit v1.2.3-70-g09d2 From f89c2b464558a21fd3be8d578b7d13e810fb6b8a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 1 Dec 2005 08:41:32 -0800 Subject: [PATCH] sky2: interrupt not cleared. One of the rearrangements dropped this and it means sky2 spins in napi/interrupt. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a1884b472cd..7dc5b4821ae 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1739,6 +1739,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) unsigned int work_done = 0; u16 hwidx; + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); -- cgit v1.2.3-70-g09d2 From c14b8331ec4843e4f2b67a4d847a0d812a50e43c Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 5 Dec 2005 15:36:08 +0800 Subject: [PATCH] libata: minor patch before moving err_mask - add qc to ata_pio_poll() - reorder the initialization of qc in ata_pio_complete() Signed-off-by: Albert Lee =================== Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 11ed6fa2709..0a959566f96 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2802,10 +2802,14 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) static unsigned long ata_pio_poll(struct ata_port *ap) { + struct ata_queued_cmd *qc; u8 status; unsigned int poll_state = HSM_ST_UNKNOWN; unsigned int reg_state = HSM_ST_UNKNOWN; + qc = ata_qc_from_tag(ap, ap->active_tag); + assert(qc != NULL); + switch (ap->hsm_task_state) { case HSM_ST: case HSM_ST_POLL: @@ -2870,15 +2874,15 @@ static int ata_pio_complete (struct ata_port *ap) } } + qc = ata_qc_from_tag(ap, ap->active_tag); + assert(qc != NULL); + drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { ap->hsm_task_state = HSM_ST_ERR; return 0; } - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, 0); -- cgit v1.2.3-70-g09d2 From a22e2eb0710798009b8e696ae911aef745089dd6 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 5 Dec 2005 15:38:02 +0800 Subject: [PATCH] libata: move err_mask to ata_queued_cmd - remove err_mask from the parameter list of the complete functions - move err_mask to ata_queued_cmd - initialize qc->err_mask when needed - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask. Signed-off-by: Albert Lee =============== Signed-off-by: Jeff Garzik --- drivers/scsi/ahci.c | 12 ++++++++---- drivers/scsi/libata-core.c | 32 +++++++++++++++++++------------- drivers/scsi/libata-scsi.c | 18 ++++++++++-------- drivers/scsi/libata.h | 2 +- drivers/scsi/pdc_adma.c | 11 +++++------ drivers/scsi/sata_mv.c | 9 ++++++--- drivers/scsi/sata_promise.c | 14 ++++++++------ drivers/scsi/sata_qstor.c | 7 ++++--- drivers/scsi/sata_sil24.c | 15 ++++++++++----- drivers/scsi/sata_sx4.c | 15 ++++++++++----- include/linux/libata.h | 7 +++++-- 11 files changed, 86 insertions(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index cfbdd3f071b..887eaa2a3eb 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -643,7 +643,8 @@ static void ahci_eng_timeout(struct ata_port *ap) * not being called from the SCSI EH. */ qc->scsidone = scsi_finish_command; - ata_qc_complete(qc, AC_ERR_OTHER); + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); } spin_unlock_irqrestore(&host_set->lock, flags); @@ -664,7 +665,8 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) ci = readl(port_mmio + PORT_CMD_ISSUE); if (likely((ci & 0x1) == 0)) { if (qc) { - ata_qc_complete(qc, 0); + assert(qc->err_mask == 0); + ata_qc_complete(qc); qc = NULL; } } @@ -681,8 +683,10 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) /* command processing has stopped due to error; restart */ ahci_restart_port(ap, status); - if (qc) - ata_qc_complete(qc, err_mask); + if (qc) { + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); + } } return 1; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0a959566f96..f56b4daf418 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1053,9 +1053,9 @@ static int ata_qc_wait_err(struct ata_queued_cmd *qc, if (wait_for_completion_timeout(wait, 30 * HZ) < 1) { /* timeout handling */ - unsigned int err_mask = ac_err_mask(ata_chk_status(qc->ap)); + qc->err_mask |= ac_err_mask(ata_chk_status(qc->ap)); - if (!err_mask) { + if (!qc->err_mask) { printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n", qc->ap->id, qc->tf.command); } else { @@ -1064,7 +1064,7 @@ static int ata_qc_wait_err(struct ata_queued_cmd *qc, rc = -EIO; } - ata_qc_complete(qc, err_mask); + ata_qc_complete(qc); } return rc; @@ -1175,6 +1175,7 @@ retry: qc->cursg_ofs = 0; qc->cursect = 0; qc->nsect = 1; + qc->err_mask = 0; goto retry; } } @@ -2777,7 +2778,7 @@ skip_map: * None. (grabs host lock) */ -void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) +void ata_poll_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; unsigned long flags; @@ -2785,7 +2786,7 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) spin_lock_irqsave(&ap->host_set->lock, flags); ap->flags &= ~ATA_FLAG_NOINTR; ata_irq_on(ap); - ata_qc_complete(qc, err_mask); + ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); } @@ -2885,7 +2886,8 @@ static int ata_pio_complete (struct ata_port *ap) ap->hsm_task_state = HSM_ST_IDLE; - ata_poll_qc_complete(qc, 0); + assert(qc->err_mask == 0); + ata_poll_qc_complete(qc); /* another command may start at this point */ @@ -3261,7 +3263,8 @@ static void ata_pio_error(struct ata_port *ap) ap->hsm_task_state = HSM_ST_IDLE; - ata_poll_qc_complete(qc, AC_ERR_ATA_BUS); + qc->err_mask |= AC_ERR_ATA_BUS; + ata_poll_qc_complete(qc); } static void ata_pio_task(void *_data) @@ -3363,7 +3366,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ap->id, qc->tf.command, drv_stat, host_stat); /* complete taskfile transaction */ - ata_qc_complete(qc, ac_err_mask(drv_stat)); + qc->err_mask |= ac_err_mask(drv_stat); + ata_qc_complete(qc); break; } @@ -3462,7 +3466,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask) +int ata_qc_complete_noop(struct ata_queued_cmd *qc) { return 0; } @@ -3521,7 +3525,7 @@ void ata_qc_free(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) */ -void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) +void ata_qc_complete(struct ata_queued_cmd *qc) { int rc; @@ -3538,7 +3542,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) qc->flags &= ~ATA_QCFLAG_ACTIVE; /* call completion callback */ - rc = qc->complete_fn(qc, err_mask); + rc = qc->complete_fn(qc); /* if callback indicates not to complete command (non-zero), * return immediately @@ -3976,7 +3980,8 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->ops->irq_clear(ap); /* complete taskfile transaction */ - ata_qc_complete(qc, ac_err_mask(status)); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); break; default: @@ -4111,7 +4116,8 @@ static void atapi_packet_task(void *_data) err_out_status: status = ata_chk_status(ap); err_out: - ata_poll_qc_complete(qc, __ac_err_mask(status)); + qc->err_mask |= __ac_err_mask(status); + ata_poll_qc_complete(qc); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index ef763ed9a0e..2aef41112c4 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1203,12 +1203,11 @@ nothing_to_do: return 1; } -static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, - unsigned int err_mask) +static int ata_scsi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; - int need_sense = (err_mask != 0); + int need_sense = (qc->err_mask != 0); /* For ATA pass thru (SAT) commands, generate a sense block if * user mandated it or if there's an error. Note that if we @@ -1955,9 +1954,9 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } -static int atapi_sense_complete(struct ata_queued_cmd *qc,unsigned int err_mask) +static int atapi_sense_complete(struct ata_queued_cmd *qc) { - if (err_mask && ((err_mask & AC_ERR_DEV) == 0)) + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) /* FIXME: not quite right; we don't want the * translation of taskfile registers into * a sense descriptors, since that's only @@ -2015,15 +2014,18 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->complete_fn = atapi_sense_complete; - if (ata_qc_issue(qc)) - ata_qc_complete(qc, AC_ERR_OTHER); + if (ata_qc_issue(qc)) { + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); + } DPRINTK("EXIT\n"); } -static int atapi_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) +static int atapi_qc_complete(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; + unsigned int err_mask = qc->err_mask; VPRINTK("ENTER, err_mask 0x%X\n", err_mask); diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 8ebaa694d18..686255df76b 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,7 +39,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; -extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask); +extern int ata_qc_complete_noop(struct ata_queued_cmd *qc); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c index f557f17ca00..e8df0c9ec1e 100644 --- a/drivers/scsi/pdc_adma.c +++ b/drivers/scsi/pdc_adma.c @@ -464,14 +464,12 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set) continue; qc = ata_qc_from_tag(ap, ap->active_tag); if (qc && (!(qc->tf.ctl & ATA_NIEN))) { - unsigned int err_mask = 0; - if ((status & (aPERR | aPSD | aUIRQ))) - err_mask = AC_ERR_OTHER; + qc->err_mask |= AC_ERR_OTHER; else if (pp->pkt[0] != cDONE) - err_mask = AC_ERR_OTHER; + qc->err_mask |= AC_ERR_OTHER; - ata_qc_complete(qc, err_mask); + ata_qc_complete(qc); } } return handled; @@ -501,7 +499,8 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set) /* complete taskfile transaction */ pp->state = adma_state_idle; - ata_qc_complete(qc, ac_err_mask(status)); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); handled = 1; } } diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index c94176693d1..3e7866b51ac 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1242,8 +1242,10 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); /* mark qc status appropriately */ - if (!(qc->tf.ctl & ATA_NIEN)) - ata_qc_complete(qc, err_mask); + if (!(qc->tf.ctl & ATA_NIEN)) { + qc->err_mask |= err_mask; + ata_qc_complete(qc); + } } } } @@ -1864,7 +1866,8 @@ static void mv_eng_timeout(struct ata_port *ap) */ spin_lock_irqsave(&ap->host_set->lock, flags); qc->scsidone = scsi_finish_command; - ata_qc_complete(qc, AC_ERR_OTHER); + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); } } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 02089069b0f..e2e146a14f9 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -401,7 +401,8 @@ static void pdc_eng_timeout(struct ata_port *ap) case ATA_PROT_NODATA: printk(KERN_ERR "ata%u: command timeout\n", ap->id); drv_stat = ata_wait_idle(ap); - ata_qc_complete(qc, __ac_err_mask(drv_stat)); + qc->err_mask |= __ac_err_mask(drv_stat); + ata_qc_complete(qc); break; default: @@ -410,7 +411,8 @@ static void pdc_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", ap->id, qc->tf.command, drv_stat); - ata_qc_complete(qc, ac_err_mask(drv_stat)); + qc->err_mask |= ac_err_mask(drv_stat); + ata_qc_complete(qc); break; } @@ -422,21 +424,21 @@ out: static inline unsigned int pdc_host_intr( struct ata_port *ap, struct ata_queued_cmd *qc) { - unsigned int handled = 0, err_mask = 0; + unsigned int handled = 0; u32 tmp; void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL; tmp = readl(mmio); if (tmp & PDC_ERR_MASK) { - err_mask = AC_ERR_DEV; + qc->err_mask |= AC_ERR_DEV; pdc_reset_port(ap); } switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - err_mask |= ac_err_mask(ata_wait_idle(ap)); - ata_qc_complete(qc, err_mask); + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); handled = 1; break; diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 6b9c3ae07cb..de05e2883f9 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -409,8 +409,8 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set) case 3: /* device error */ pp->state = qs_state_idle; qs_enter_reg_mode(qc->ap); - ata_qc_complete(qc, - ac_err_mask(sDST)); + qc->err_mask |= ac_err_mask(sDST); + ata_qc_complete(qc); break; default: break; @@ -447,7 +447,8 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set) /* complete taskfile transaction */ pp->state = qs_state_idle; - ata_qc_complete(qc, ac_err_mask(status)); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); handled = 1; } } diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index e0d6f194f54..a0ad3ed2200 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -654,7 +654,8 @@ static void sil24_eng_timeout(struct ata_port *ap) */ printk(KERN_ERR "ata%u: command timeout\n", ap->id); qc->scsidone = scsi_finish_command; - ata_qc_complete(qc, AC_ERR_OTHER); + qc->err_mask |= AC_ERR_OTHER; + ata_qc_complete(qc); sil24_reset_controller(ap); } @@ -711,8 +712,10 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) sil24_reset_controller(ap); } - if (qc) - ata_qc_complete(qc, err_mask); + if (qc) { + qc->err_mask |= err_mask; + ata_qc_complete(qc); + } } static inline void sil24_host_intr(struct ata_port *ap) @@ -734,8 +737,10 @@ static inline void sil24_host_intr(struct ata_port *ap) */ sil24_update_tf(ap); - if (qc) - ata_qc_complete(qc, ac_err_mask(pp->tf.command)); + if (qc) { + qc->err_mask |= ac_err_mask(pp->tf.command); + ata_qc_complete(qc); + } } else sil24_error_intr(ap, slot_stat); } diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 7c4b5357551..58da854a7c6 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -718,7 +718,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* get drive status; clear intr; complete txn */ - ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap))); + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); pdc20621_pop_hdma(qc); } @@ -756,7 +757,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id, readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT)); /* get drive status; clear intr; complete txn */ - ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap))); + qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); pdc20621_pop_hdma(qc); } handled = 1; @@ -766,7 +768,8 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap, status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status); - ata_qc_complete(qc, ac_err_mask(status)); + qc->err_mask |= ac_err_mask(status); + ata_qc_complete(qc); handled = 1; } else { @@ -881,7 +884,8 @@ static void pdc_eng_timeout(struct ata_port *ap) case ATA_PROT_DMA: case ATA_PROT_NODATA: printk(KERN_ERR "ata%u: command timeout\n", ap->id); - ata_qc_complete(qc, __ac_err_mask(ata_wait_idle(ap))); + qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); + ata_qc_complete(qc); break; default: @@ -890,7 +894,8 @@ static void pdc_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n", ap->id, qc->tf.command, drv_stat); - ata_qc_complete(qc, ac_err_mask(drv_stat)); + qc->err_mask |= ac_err_mask(drv_stat); + ata_qc_complete(qc); break; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 83a83babff8..e18ce039cdf 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -194,7 +194,7 @@ struct ata_port; struct ata_queued_cmd; /* typedefs */ -typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc, unsigned int err_mask); +typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc); struct ata_ioports { unsigned long cmd_addr; @@ -279,6 +279,8 @@ struct ata_queued_cmd { /* DO NOT iterate over __sg manually, use ata_for_each_sg() */ struct scatterlist *__sg; + unsigned int err_mask; + ata_qc_cb_t complete_fn; struct completion *waiting; @@ -475,7 +477,7 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); extern void ata_bmdma_irq_clear(struct ata_port *ap); -extern void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask); +extern void ata_qc_complete(struct ata_queued_cmd *qc); extern void ata_eng_timeout(struct ata_port *ap); extern void ata_scsi_simulate(u16 *id, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); @@ -667,6 +669,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->cursect = qc->cursg = qc->cursg_ofs = 0; qc->nsect = 0; qc->nbytes = qc->curbytes = 0; + qc->err_mask = 0; ata_tf_init(qc->ap, &qc->tf, qc->dev->devno); } -- cgit v1.2.3-70-g09d2 From 1c8489840e6b080e810e588423c1b6dd5913cf18 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 5 Dec 2005 15:40:15 +0800 Subject: [PATCH] libata: determine the err_mask when the error is found - move "qc->err_mask |= AC_ERR_ATA_BUS" to where the error is found - add "assert(qc->err_mask)" to ata_pio_error() to make sure qc->err_mask was available when we enter the error state Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f56b4daf418..cc003f2c6d9 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2830,6 +2830,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_TMOUT; return 0; } @@ -2880,6 +2881,7 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { + qc->err_mask |= __ac_err_mask(drv_stat); ap->hsm_task_state = HSM_ST_ERR; return 0; } @@ -3195,6 +3197,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; } @@ -3244,6 +3247,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { + qc->err_mask |= AC_ERR_ATA_BUS; ap->hsm_task_state = HSM_ST_ERR; return; } @@ -3261,9 +3265,13 @@ static void ata_pio_error(struct ata_port *ap) qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + assert(qc->err_mask); + ap->hsm_task_state = HSM_ST_IDLE; - qc->err_mask |= AC_ERR_ATA_BUS; ata_poll_qc_complete(qc); } -- cgit v1.2.3-70-g09d2 From d8fe452b3e8e9ea6d62a3d116a092999fabae407 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Mon, 5 Dec 2005 15:42:17 +0800 Subject: [PATCH] libata: determine the err_mask directly in atapi_packet_task() - set qc->err_mask directly when we found the error - remove the code to determine err_mask from device status Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cc003f2c6d9..b3aedb03346 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4083,13 +4083,17 @@ static void atapi_packet_task(void *_data) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) - goto err_out_status; + if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { + qc->err_mask |= AC_ERR_ATA_BUS; + goto err_out; + } /* make sure DRQ is set */ status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + qc->err_mask |= AC_ERR_ATA_BUS; goto err_out; + } /* send SCSI cdb */ DPRINTK("send cdb\n"); @@ -4121,10 +4125,7 @@ static void atapi_packet_task(void *_data) return; -err_out_status: - status = ata_chk_status(ap); err_out: - qc->err_mask |= __ac_err_mask(status); ata_poll_qc_complete(qc); } -- cgit v1.2.3-70-g09d2 From fe79e683ccdb29c13b3e0d18507474b4e2d9aab6 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 6 Dec 2005 11:34:59 +0800 Subject: [PATCH] libata: err_mask misc fix 1. ata_pio_complete(): It seems unnecessary to wait for the clearing of the DRQ bit. (Waiting for BSY=0 should be enough. ata_ok() also checks the correctness of the status bits later.) 2. ata_pio_block(): - added error checking, before transfering data. - minor comments fix Signed-off-by: Albert Lee ============ Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index b3aedb03346..e4c400756b2 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2865,11 +2865,11 @@ static int ata_pio_complete (struct ata_port *ap) * msecs, then chk-status again. If still busy, fall back to * HSM_ST_POLL state. */ - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); - if (drv_stat & (ATA_BUSY | ATA_DRQ)) { + drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); + if (drv_stat & ATA_BUSY) { msleep(2); - drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); - if (drv_stat & (ATA_BUSY | ATA_DRQ)) { + drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); + if (drv_stat & ATA_BUSY) { ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; @@ -3236,8 +3236,16 @@ static void ata_pio_block(struct ata_port *ap) qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); + /* check error */ + if (status & (ATA_ERR | ATA_DF)) { + qc->err_mask |= AC_ERR_DEV; + ap->hsm_task_state = HSM_ST_ERR; + return; + } + + /* transfer data if any */ if (is_atapi_taskfile(&qc->tf)) { - /* no more data to transfer or unsupported ATAPI command */ + /* DRQ=0 means no more data to transfer */ if ((status & ATA_DRQ) == 0) { ap->hsm_task_state = HSM_ST_LAST; return; -- cgit v1.2.3-70-g09d2 From 95235ca2c20ac0b31a8eb39e2d599bcc3e9c9a10 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Fri, 2 Dec 2005 10:43:20 -0800 Subject: [CPUFREQ] CPU frequency display in /proc/cpuinfo What is the value shown in "cpu MHz" of /proc/cpuinfo when CPUs are capable of changing frequency? Today the answer is: It depends. On i386: SMP kernel - It is always the boot frequency UP kernel - Scales with the frequency change and shows that was last set. On x86_64: There is one single variable cpu_khz that gets written by all the CPUs. So, the frequency set by last CPU will be seen on /proc/cpuinfo of all the CPUs in the system. What you see also depends on whether you have constant_tsc capable CPU or not. On ia64: It is always boot time frequency of a particular CPU that gets displayed. The patch below changes this to: Show the last known frequency of the particular CPU, when cpufreq is present. If cpu doesnot support changing of frequency through cpufreq, then boot frequency will be shown. The patch affects i386, x86_64 and ia64 architectures. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- arch/i386/kernel/cpu/proc.c | 6 +++++- arch/ia64/kernel/setup.c | 8 +++++++- arch/x86_64/kernel/setup.c | 6 +++++- drivers/cpufreq/cpufreq.c | 24 ++++++++++++++++++++++++ include/linux/cpufreq.h | 10 ++++++++++ 5 files changed, 51 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c index e7921315ae9..6d91b274589 100644 --- a/arch/i386/kernel/cpu/proc.c +++ b/arch/i386/kernel/cpu/proc.c @@ -3,6 +3,7 @@ #include #include #include +#include /* * Get CPU information for use by the procfs. @@ -86,8 +87,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "stepping\t: unknown\n"); if ( cpu_has(c, X86_FEATURE_TSC) ) { + unsigned int freq = cpufreq_quick_get(n); + if (!freq) + freq = cpu_khz; seq_printf(m, "cpu MHz\t\t: %u.%03u\n", - cpu_khz / 1000, (cpu_khz % 1000)); + freq / 1000, (freq % 1000)); } /* Cache size */ diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 5add0bcf87a..088e5dded8d 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include @@ -517,6 +518,7 @@ show_cpuinfo (struct seq_file *m, void *v) char family[32], features[128], *cp, sep; struct cpuinfo_ia64 *c = v; unsigned long mask; + unsigned int proc_freq; int i; mask = c->features; @@ -549,6 +551,10 @@ show_cpuinfo (struct seq_file *m, void *v) sprintf(cp, " 0x%lx", mask); } + proc_freq = cpufreq_quick_get(cpunum); + if (!proc_freq) + proc_freq = c->proc_freq / 1000; + seq_printf(m, "processor : %d\n" "vendor : %s\n" @@ -565,7 +571,7 @@ show_cpuinfo (struct seq_file *m, void *v) "BogoMIPS : %lu.%02lu\n", cpunum, c->vendor, family, c->model, c->revision, c->archrev, features, c->ppn, c->number, - c->proc_freq / 1000000, c->proc_freq % 1000000, + proc_freq / 1000, proc_freq % 1000, c->itc_freq / 1000000, c->itc_freq % 1000000, lpj*HZ/500000, (lpj*HZ/5000) % 100); #ifdef CONFIG_SMP diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 750e01dcbdf..64c4534b930 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -1256,8 +1257,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "stepping\t: unknown\n"); if (cpu_has(c,X86_FEATURE_TSC)) { + unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data)); + if (!freq) + freq = cpu_khz; seq_printf(m, "cpu MHz\t\t: %u.%03u\n", - cpu_khz / 1000, (cpu_khz % 1000)); + freq / 1000, (freq % 1000)); } /* Cache size */ diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 815902c2c85..a9163d02983 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -822,6 +822,30 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne } +/** + * cpufreq_quick_get - get the CPU frequency (in kHz) frpm policy->cur + * @cpu: CPU number + * + * This is the last known freq, without actually getting it from the driver. + * Return value will be same as what is shown in scaling_cur_freq in sysfs. + */ +unsigned int cpufreq_quick_get(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret = 0; + + if (policy) { + down(&policy->lock); + ret = policy->cur; + up(&policy->lock); + cpufreq_cpu_put(policy); + } + + return (ret); +} +EXPORT_SYMBOL(cpufreq_quick_get); + + /** * cpufreq_get - get the current CPU frequency (in kHz) * @cpu: CPU number diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index d068176b7ad..c31650df924 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -256,6 +256,16 @@ int cpufreq_update_policy(unsigned int cpu); /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ unsigned int cpufreq_get(unsigned int cpu); +/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ +#ifdef CONFIG_CPU_FREQ +unsigned int cpufreq_quick_get(unsigned int cpu); +#else +static inline unsigned int cpufreq_quick_get(unsigned int cpu) +{ + return 0; +} +#endif + /********************************************************************* * CPUFREQ DEFAULT GOVERNOR * -- cgit v1.2.3-70-g09d2 From 92f965e8c5433408d5a3805c6882b657eb6cbdb1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:53 -0800 Subject: [PATCH] sky2: don't die if we see chip rev 0xb5 There maybe new versions of Yukon2 in the future, so make the driver more robust to handle this. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7dc5b4821ae..0f694a917fb 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -128,17 +128,15 @@ MODULE_DEVICE_TABLE(pci, sky2_id_table); static const unsigned txqaddr[] = { Q_XA1, Q_XA2 }; static const unsigned rxqaddr[] = { Q_R1, Q_R2 }; -static const char *yukon_name[] = { - [CHIP_ID_YUKON_LITE - CHIP_ID_YUKON] = "Lite", /* 0xb0 */ - [CHIP_ID_YUKON_LP - CHIP_ID_YUKON] = "LP", /* 0xb2 */ - [CHIP_ID_YUKON_XL - CHIP_ID_YUKON] = "XL", /* 0xb3 */ - [CHIP_ID_YUKON_EC_U - CHIP_ID_YUKON] = "EC Ultra", /* 0xb4 */ - - [CHIP_ID_YUKON_EC - CHIP_ID_YUKON] = "EC", /* 0xb6 */ - [CHIP_ID_YUKON_FE - CHIP_ID_YUKON] = "FE", /* 0xb7 */ +/* This driver supports yukon2 chipset only */ +static const char *yukon2_name[] = { + "XL", /* 0xb3 */ + "EC Ultra", /* 0xb4 */ + "UNKNOWN", /* 0xb5 */ + "EC", /* 0xb6 */ + "FE", /* 0xb7 */ }; - /* Access to external PHY */ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { @@ -2951,7 +2949,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, printk(KERN_INFO PFX "v%s addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n", DRV_VERSION, pci_resource_start(pdev, 0), pdev->irq, - yukon_name[hw->chip_id - CHIP_ID_YUKON], + yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], hw->chip_id, hw->chip_rev); dev = sky2_init_netdev(hw, 0, using_dac); -- cgit v1.2.3-70-g09d2 From 6e23231b6509f17a251e6dfddb607d300680ac25 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:54 -0800 Subject: [PATCH] sky2: device structure alignment It is a useful optimization to rearrange the structure slightly to align receive and transmit portions. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 930680f50fc..7943dd42ac9 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1790,17 +1790,17 @@ struct sky2_port { unsigned port; u32 msg_enable; - struct ring_info *tx_ring; + spinlock_t tx_lock ____cacheline_aligned_in_smp; + struct ring_info *tx_ring; struct sky2_tx_le *tx_le; - spinlock_t tx_lock; - u32 tx_addr64; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ + u32 tx_addr64; u16 tx_pending; u16 tx_last_put; u16 tx_last_mss; - struct ring_info *rx_ring; + struct ring_info *rx_ring ____cacheline_aligned_in_smp; struct sky2_rx_le *rx_le; u32 rx_addr64; u16 rx_next; /* next re to check */ -- cgit v1.2.3-70-g09d2 From bdb5c58ebe4301f9c3470cc35adeff1ef7ee99eb Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:55 -0800 Subject: [PATCH] sky2: copy threshold as module parameter Make the copy threshold a module parameter for those who may want to turn it off. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0f694a917fb..f2f8f60a091 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -76,7 +76,6 @@ #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) #define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) #define RX_DEF_PENDING RX_MAX_PENDING -#define RX_COPY_THRESHOLD 256 #define TX_RING_SIZE 512 #define TX_DEF_PENDING (TX_RING_SIZE - 1) @@ -99,6 +98,10 @@ static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); +static int copybreak __read_mostly = 256; +module_param(copybreak, int, 0); +MODULE_PARM_DESC(copybreak, "Receive copy threshold"); + static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, @@ -1653,7 +1656,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (length < RX_COPY_THRESHOLD) { + if (length < copybreak) { skb = alloc_skb(length + 2, GFP_ATOMIC); if (!skb) goto resubmit; -- cgit v1.2.3-70-g09d2 From fb17358fe31e01baf902a9fd1fce0e29e3493517 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:56 -0800 Subject: [PATCH] sky2: ethtool get/set interrupt coalescing Add support for get/set the interrupt coalescing settings. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 103 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f2f8f60a091..0ab376845e3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -24,9 +24,6 @@ */ /* - * TODO - * - coalescing setting? - * * TOTEST * - speed setting * - suspend/resume @@ -2019,29 +2016,30 @@ static void sky2_netpoll(struct net_device *dev) #endif /* Chip internal frequency for clock calculations */ -static inline u32 sky2_khz(const struct sky2_hw *hw) +static inline u32 sky2_mhz(const struct sky2_hw *hw) { switch (hw->chip_id) { case CHIP_ID_YUKON_EC: case CHIP_ID_YUKON_EC_U: - return 125000; /* 125 Mhz */ + return 125; /* 125 Mhz */ case CHIP_ID_YUKON_FE: - return 100000; /* 100 Mhz */ + return 100; /* 100 Mhz */ default: /* YUKON_XL */ - return 156000; /* 156 Mhz */ + return 156; /* 156 Mhz */ } } -static inline u32 sky2_ms2clk(const struct sky2_hw *hw, u32 ms) +static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) { - return sky2_khz(hw) * ms; + return sky2_mhz(hw) * us; } -static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us) +static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk) { - return (sky2_khz(hw) * us) / 1000; + return clk / sky2_mhz(hw); } + static int sky2_reset(struct sky2_hw *hw) { u32 ctst; @@ -2169,7 +2167,7 @@ static int sky2_reset(struct sky2_hw *hw) /* Set the list last index */ sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); - sky2_write32(hw, STAT_TX_TIMER_INI, sky2_ms2clk(hw, 10)); + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); /* These status setup values are copied from SysKonnect's driver */ if (is_ec_a1(hw)) { @@ -2680,6 +2678,97 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) } #endif +static int sky2_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + + if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP) + ecmd->tx_coalesce_usecs = 0; + else { + u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI); + ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks); + } + ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH); + + if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP) + ecmd->rx_coalesce_usecs = 0; + else { + u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI); + ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks); + } + ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM); + + if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP) + ecmd->rx_coalesce_usecs_irq = 0; + else { + u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI); + ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks); + } + + ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM); + + return 0; +} + +/* Note: this affect both ports */ +static int sky2_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + const u32 tmin = sky2_clk2us(hw, 1); + const u32 tmax = 5000; + + if (ecmd->tx_coalesce_usecs != 0 && + (ecmd->tx_coalesce_usecs < tmin || ecmd->tx_coalesce_usecs > tmax)) + return -EINVAL; + + if (ecmd->rx_coalesce_usecs != 0 && + (ecmd->rx_coalesce_usecs < tmin || ecmd->rx_coalesce_usecs > tmax)) + return -EINVAL; + + if (ecmd->rx_coalesce_usecs_irq != 0 && + (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax)) + return -EINVAL; + + if (ecmd->tx_max_coalesced_frames > 0xffff) + return -EINVAL; + if (ecmd->rx_max_coalesced_frames > 0xff) + return -EINVAL; + if (ecmd->rx_max_coalesced_frames_irq > 0xff) + return -EINVAL; + + if (ecmd->tx_coalesce_usecs == 0) + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_TX_TIMER_INI, + sky2_us2clk(hw, ecmd->tx_coalesce_usecs)); + sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); + } + sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames); + + if (ecmd->rx_coalesce_usecs == 0) + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_LEV_TIMER_INI, + sky2_us2clk(hw, ecmd->rx_coalesce_usecs)); + sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START); + } + sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames); + + if (ecmd->rx_coalesce_usecs_irq == 0) + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP); + else { + sky2_write32(hw, STAT_TX_TIMER_INI, + sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq)); + sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START); + } + sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq); + return 0; +} + static void sky2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { @@ -2765,6 +2854,8 @@ static struct ethtool_ops sky2_ethtool_ops = { .get_rx_csum = sky2_get_rx_csum, .set_rx_csum = sky2_set_rx_csum, .get_strings = sky2_get_strings, + .get_coalesce = sky2_get_coalesce, + .set_coalesce = sky2_set_coalesce, .get_ringparam = sky2_get_ringparam, .set_ringparam = sky2_set_ringparam, .get_pauseparam = sky2_get_pauseparam, -- cgit v1.2.3-70-g09d2 From 91c86df5a8a44157b456bf1e91fc6d878582e68c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:57 -0800 Subject: [PATCH] sky2: phy processing in workqueue rather than tasklet Do phy processing in a work queue rather than a tasklet. This means we can let bottom halves run. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 58 ++++++++++++++++++++++++++++-------------------------- drivers/net/sky2.h | 6 +++--- 2 files changed, 33 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0ab376845e3..2cb6406c963 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include @@ -535,9 +536,9 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC)); - spin_lock_bh(&hw->phy_lock); + down(&sky2->phy_sema); sky2_phy_init(hw, port); - spin_unlock_bh(&hw->phy_lock); + up(&sky2->phy_sema); /* MIB clear */ reg = gma_read16(hw, port, GM_PHY_ADDR); @@ -839,9 +840,11 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /* fallthru */ case SIOCGMIIREG: { u16 val = 0; - spin_lock_bh(&hw->phy_lock); + + down(&sky2->phy_sema); err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val); - spin_unlock_bh(&hw->phy_lock); + up(&sky2->phy_sema); + data->val_out = val; break; } @@ -850,10 +853,10 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_bh(&hw->phy_lock); + down(&sky2->phy_sema); err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f, data->val_in); - spin_unlock_bh(&hw->phy_lock); + up(&sky2->phy_sema); break; } return err; @@ -1308,6 +1311,7 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, B0_IMSK, hw->intr_mask); local_irq_enable(); + flush_scheduled_work(); sky2_phy_reset(hw, port); @@ -1520,17 +1524,17 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) } /* - * Interrupt from PHY are handled in tasklet (soft irq) + * Interrupt from PHY are handled outside of interrupt context * because accessing phy registers requires spin wait which might * cause excess interrupt latency. */ -static void sky2_phy_task(unsigned long data) +static void sky2_phy_task(void *arg) { - struct sky2_port *sky2 = (struct sky2_port *)data; + struct sky2_port *sky2 = arg; struct sky2_hw *hw = sky2->hw; u16 istatus, phystat; - spin_lock(&hw->phy_lock); + down(&sky2->phy_sema); istatus = gm_phy_read(hw, sky2->port, PHY_MARV_INT_STAT); phystat = gm_phy_read(hw, sky2->port, PHY_MARV_PHY_STAT); @@ -1558,7 +1562,7 @@ static void sky2_phy_task(unsigned long data) sky2_link_down(sky2); } out: - spin_unlock(&hw->phy_lock); + up(&sky2->phy_sema); local_irq_disable(); hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2; @@ -1960,7 +1964,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port) hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2); sky2_write32(hw, B0_IMSK, hw->intr_mask); - tasklet_schedule(&sky2->phy_task); + schedule_work(&sky2->phy_task); } static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs) @@ -2150,10 +2154,8 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); - spin_lock_bh(&hw->phy_lock); for (i = 0; i < hw->ports; i++) sky2_phy_reset(hw, i); - spin_unlock_bh(&hw->phy_lock); memset(hw->st_le, 0, STATUS_LE_BYTES); hw->st_idx = 0; @@ -2386,10 +2388,10 @@ static int sky2_nway_reset(struct net_device *dev) netif_stop_queue(dev); - spin_lock_irq(&hw->phy_lock); + down(&sky2->phy_sema); sky2_phy_reset(hw, sky2->port); sky2_phy_init(hw, sky2->port); - spin_unlock_irq(&hw->phy_lock); + up(&sky2->phy_sema); return 0; } @@ -2528,11 +2530,10 @@ static void sky2_set_multicast(struct net_device *dev) /* Can have one global because blinking is controlled by * ethtool and that is always under RTNL mutex */ -static inline void sky2_led(struct sky2_hw *hw, unsigned port, int on) +static void sky2_led(struct sky2_hw *hw, unsigned port, int on) { u16 pg; - spin_lock_bh(&hw->phy_lock); switch (hw->chip_id) { case CHIP_ID_YUKON_XL: pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); @@ -2562,7 +2563,6 @@ static inline void sky2_led(struct sky2_hw *hw, unsigned port, int on) PHY_M_LED_MO_RX(MO_LED_OFF)); } - spin_unlock_bh(&hw->phy_lock); } /* blink LED's for finding board */ @@ -2573,6 +2573,7 @@ static int sky2_phys_id(struct net_device *dev, u32 data) unsigned port = sky2->port; u16 ledctrl, ledover = 0; long ms; + int interrupted; int onoff = 1; if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) @@ -2581,7 +2582,7 @@ static int sky2_phys_id(struct net_device *dev, u32 data) ms = data * 1000; /* save initial values */ - spin_lock_bh(&hw->phy_lock); + down(&sky2->phy_sema); if (hw->chip_id == CHIP_ID_YUKON_XL) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); @@ -2591,19 +2592,20 @@ static int sky2_phys_id(struct net_device *dev, u32 data) ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); } - spin_unlock_bh(&hw->phy_lock); - while (ms > 0) { + interrupted = 0; + while (!interrupted && ms > 0) { sky2_led(hw, port, onoff); onoff = !onoff; - if (msleep_interruptible(250)) - break; /* interrupted */ + up(&sky2->phy_sema); + interrupted = msleep_interruptible(250); + down(&sky2->phy_sema); + ms -= 250; } /* resume regularly scheduled programming */ - spin_lock_bh(&hw->phy_lock); if (hw->chip_id == CHIP_ID_YUKON_XL) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); @@ -2613,7 +2615,7 @@ static int sky2_phys_id(struct net_device *dev, u32 data) gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); } - spin_unlock_bh(&hw->phy_lock); + up(&sky2->phy_sema); return 0; } @@ -2917,7 +2919,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->speed = -1; sky2->advertising = sky2_supported_modes(hw); sky2->rx_csum = 1; - tasklet_init(&sky2->phy_task, sky2_phy_task, (unsigned long)sky2); + INIT_WORK(&sky2->phy_task, sky2_phy_task, sky2); + init_MUTEX(&sky2->phy_sema); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING; @@ -3027,7 +3030,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, memset(hw, 0, sizeof(*hw)); hw->pdev = pdev; - spin_lock_init(&hw->phy_lock); hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); if (!hw->regs) { diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 7943dd42ac9..29ebca099f9 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1823,8 +1823,10 @@ struct sky2_port { u8 rx_csum; u8 wol; - struct tasklet_struct phy_task; struct net_device_stats net_stats; + + struct work_struct phy_task; + struct semaphore phy_sema; }; struct sky2_hw { @@ -1842,8 +1844,6 @@ struct sky2_hw { struct sky2_status_le *st_le; u32 st_idx; dma_addr_t st_dma; - - spinlock_t phy_lock; }; /* Register accessor for memory mapped device */ -- cgit v1.2.3-70-g09d2 From f2e46561cc1afa82b18b2fc6efc8510ec57c7d7d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:58 -0800 Subject: [PATCH] sky2: no irq disable needed during tx Don't need to disable interrupts during the transmit routine. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2cb6406c963..eae270d8180 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -868,15 +868,14 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - unsigned long flags; - spin_lock_irqsave(&sky2->tx_lock, flags); + spin_lock(&sky2->tx_lock); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); sky2->vlgrp = grp; - spin_unlock_irqrestore(&sky2->tx_lock, flags); + spin_unlock(&sky2->tx_lock); } static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) @@ -884,16 +883,15 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - unsigned long flags; - spin_lock_irqsave(&sky2->tx_lock, flags); + spin_lock(&sky2->tx_lock); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); if (sky2->vlgrp) sky2->vlgrp->vlan_devices[vid] = NULL; - spin_unlock_irqrestore(&sky2->tx_lock, flags); + spin_unlock(&sky2->tx_lock); } #endif @@ -1072,6 +1070,8 @@ static inline unsigned tx_le_req(const struct sk_buff *skb) * A single packet can generate multiple list elements, and * the number of ring elements will probably be less than the number * of list elements used. + * + * No BH disabling for tx_lock here (like tg3) */ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { @@ -1079,22 +1079,18 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_hw *hw = sky2->hw; struct sky2_tx_le *le = NULL; struct ring_info *re; - unsigned long flags; unsigned i, len; dma_addr_t mapping; u32 addr64; u16 mss; u8 ctrl; - local_irq_save(flags); - if (!spin_trylock(&sky2->tx_lock)) { - local_irq_restore(flags); + if (!spin_trylock(&sky2->tx_lock)) return NETDEV_TX_LOCKED; - } if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { netif_stop_queue(dev); - spin_unlock_irqrestore(&sky2->tx_lock, flags); + spin_unlock(&sky2->tx_lock); printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", dev->name); @@ -1226,7 +1222,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) out_unlock: mmiowb(); - spin_unlock_irqrestore(&sky2->tx_lock, flags); + spin_unlock(&sky2->tx_lock); dev->trans_start = jiffies; return NETDEV_TX_OK; -- cgit v1.2.3-70-g09d2 From 129372d0524c9124d5693f63c1d3c1ce2e3714ce Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:34:59 -0800 Subject: [PATCH] sky2: ring distance optimization Faster way to compute ring distance. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eae270d8180..2dd46a05fb3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1039,7 +1039,7 @@ err_out: /* Modular subtraction in ring */ static inline int tx_dist(unsigned tail, unsigned head) { - return (head >= tail ? head : head + TX_RING_SIZE) - tail; + return (head - tail) % TX_RING_SIZE; } /* Number of list elements available for next tx */ -- cgit v1.2.3-70-g09d2 From 734d18684695dd1c6a9527b50e01bba4acab4738 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:00 -0800 Subject: [PATCH] sky2: map length optimization Don't need to keep track of mapping length in ring structure because we can get the same info from other info. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 57 +++++++++++++++++++++++++++--------------------------- drivers/net/sky2.h | 2 +- 2 files changed, 29 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2dd46a05fb3..b1a5886a48a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -729,23 +729,23 @@ static inline u32 high32(dma_addr_t a) } /* Build description to hardware about buffer */ -static inline void sky2_rx_add(struct sky2_port *sky2, struct ring_info *re) +static inline void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) { struct sky2_rx_le *le; - u32 hi = high32(re->mapaddr); + u32 hi = high32(map); + u16 len = sky2->rx_bufsize; - re->idx = sky2->rx_put; if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); le->addr = cpu_to_le32(hi); le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; - sky2->rx_addr64 = high32(re->mapaddr + re->maplen); + sky2->rx_addr64 = high32(map + len); } le = sky2_next_rx(sky2); - le->addr = cpu_to_le32((u32) re->mapaddr); - le->length = cpu_to_le16(re->maplen); + le->addr = cpu_to_le32((u32) map); + le->length = cpu_to_le16(len); le->ctrl = 0; le->opcode = OP_PACKET | HW_OWNER; } @@ -814,7 +814,7 @@ static void sky2_rx_clean(struct sky2_port *sky2) if (re->skb) { pci_unmap_single(sky2->hw->pdev, - re->mapaddr, re->maplen, + re->mapaddr, sky2->rx_bufsize, PCI_DMA_FROMDEVICE); kfree_skb(re->skb); re->skb = NULL; @@ -895,12 +895,6 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) } #endif -#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) -static inline unsigned rx_size(const struct sky2_port *sky2) -{ - return roundup(sky2->netdev->mtu + ETH_HLEN + 4, 8); -} - /* * Allocate and setup receiver buffer pool. * In case of 64 bit dma, there are 2X as many list elements @@ -915,7 +909,6 @@ static inline unsigned rx_size(const struct sky2_port *sky2) static int sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; - unsigned size = rx_size(sky2); unsigned rxq = rxqaddr[sky2->port]; int i; @@ -927,14 +920,13 @@ static int sky2_rx_start(struct sky2_port *sky2) for (i = 0; i < sky2->rx_pending; i++) { struct ring_info *re = sky2->rx_ring + i; - re->skb = dev_alloc_skb(size); + re->skb = dev_alloc_skb(sky2->rx_bufsize); if (!re->skb) goto nomem; re->mapaddr = pci_map_single(hw->pdev, re->skb->data, - size, PCI_DMA_FROMDEVICE); - re->maplen = size; - sky2_rx_add(sky2, re); + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); + sky2_rx_add(sky2, re->mapaddr); } /* Tell chip about available buffers */ @@ -1182,7 +1174,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Record the transmit mapping info */ re->skb = skb; re->mapaddr = mapping; - re->maplen = len; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; @@ -1209,7 +1200,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE; fre->skb = NULL; fre->mapaddr = mapping; - fre->maplen = frag->size; } re->idx = sky2->tx_prod; le->ctrl |= EOP; @@ -1258,8 +1248,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) goto out; skb = re->skb; - pci_unmap_single(sky2->hw->pdev, - re->mapaddr, re->maplen, PCI_DMA_TODEVICE); + pci_unmap_single(sky2->hw->pdev, re->mapaddr, + skb_headlen(skb), PCI_DMA_TODEVICE); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { struct ring_info *fre; @@ -1267,7 +1257,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) sky2->tx_ring + (sky2->tx_cons + i + 1) % TX_RING_SIZE; pci_unmap_page(sky2->hw->pdev, fre->mapaddr, - fre->maplen, PCI_DMA_TODEVICE); + skb_shinfo(skb)->frags[i].size, + PCI_DMA_TODEVICE); } dev_kfree_skb_any(skb); @@ -1579,6 +1570,14 @@ static void sky2_tx_timeout(struct net_device *dev) sky2_tx_clean(sky2); } + +#define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) +/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */ +static inline unsigned sky2_buf_size(int mtu) +{ + return roundup(mtu + ETH_HLEN + 4, 8); +} + static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); @@ -1609,6 +1608,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_rx_clean(sky2); dev->mtu = new_mtu; + sky2->rx_bufsize = sky2_buf_size(new_mtu); mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); @@ -1639,7 +1639,6 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, { struct ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; - const unsigned int bufsize = rx_size(sky2); if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", @@ -1669,25 +1668,24 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, } else { struct sk_buff *nskb; - nskb = dev_alloc_skb(bufsize); + nskb = dev_alloc_skb(sky2->rx_bufsize); if (!nskb) goto resubmit; skb = re->skb; re->skb = nskb; pci_unmap_single(sky2->hw->pdev, re->mapaddr, - re->maplen, PCI_DMA_FROMDEVICE); + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); prefetch(skb->data); re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - bufsize, PCI_DMA_FROMDEVICE); - re->maplen = bufsize; + sky2->rx_bufsize, PCI_DMA_FROMDEVICE); } skb_put(skb, length); resubmit: re->skb->ip_summed = CHECKSUM_NONE; - sky2_rx_add(sky2, re); + sky2_rx_add(sky2, re->mapaddr); /* Tell receiver about new buffers. */ sky2_put_idx(sky2->hw, rxqaddr[sky2->port], sky2->rx_put, @@ -2919,6 +2917,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, init_MUTEX(&sky2->phy_sema); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = is_ec_a1(hw) ? 8 : RX_DEF_PENDING; + sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 29ebca099f9..1a91c2d4561 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1780,7 +1780,6 @@ struct sky2_status_le { struct ring_info { struct sk_buff *skb; dma_addr_t mapaddr; - u16 maplen; u16 idx; }; @@ -1807,6 +1806,7 @@ struct sky2_port { u16 rx_put; /* next le index to use */ u16 rx_pending; u16 rx_last_put; + u16 rx_bufsize; #ifdef SKY2_VLAN_TAG_USED u16 rx_tag; struct vlan_group *vlgrp; -- cgit v1.2.3-70-g09d2 From 6cdbbdf3055f4657c9d6ccc79257bbcac1a9a1fc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:01 -0800 Subject: [PATCH] sky2: tx/rx ring data structure split Split Tx and Rx ring into two different data structures. Tx needs the next value (to handle partial status), and Rx always needs the mapaddr (to handle resubmitting same buffer). Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 24 +++++++++++++----------- drivers/net/sky2.h | 9 +++++++-- 2 files changed, 20 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index b1a5886a48a..1eefacbfcd2 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -958,7 +958,7 @@ static int sky2_up(struct net_device *dev) if (!sky2->tx_le) goto err_out; - sky2->tx_ring = kzalloc(TX_RING_SIZE * sizeof(struct ring_info), + sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info), GFP_KERNEL); if (!sky2->tx_ring) goto err_out; @@ -970,7 +970,7 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kzalloc(sky2->rx_pending * sizeof(struct ring_info), + sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; @@ -1070,7 +1070,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; struct sky2_tx_le *le = NULL; - struct ring_info *re; + struct tx_ring_info *re; unsigned i, len; dma_addr_t mapping; u32 addr64; @@ -1173,11 +1173,11 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Record the transmit mapping info */ re->skb = skb; - re->mapaddr = mapping; + pci_unmap_addr_set(re, mapaddr, mapping); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - struct ring_info *fre; + struct tx_ring_info *fre; mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); @@ -1198,9 +1198,9 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) fre = sky2->tx_ring + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE; - fre->skb = NULL; - fre->mapaddr = mapping; + pci_unmap_addr_set(fre, mapaddr, mapping); } + re->idx = sky2->tx_prod; le->ctrl |= EOP; @@ -1239,7 +1239,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) spin_lock(&sky2->tx_lock); while (sky2->tx_cons != done) { - struct ring_info *re = sky2->tx_ring + sky2->tx_cons; + struct tx_ring_info *re = sky2->tx_ring + sky2->tx_cons; struct sk_buff *skb; /* Check for partial status */ @@ -1248,15 +1248,17 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) goto out; skb = re->skb; - pci_unmap_single(sky2->hw->pdev, re->mapaddr, + pci_unmap_single(sky2->hw->pdev, + pci_unmap_addr(re, mapaddr), skb_headlen(skb), PCI_DMA_TODEVICE); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - struct ring_info *fre; + struct tx_ring_info *fre; fre = sky2->tx_ring + (sky2->tx_cons + i + 1) % TX_RING_SIZE; - pci_unmap_page(sky2->hw->pdev, fre->mapaddr, + pci_unmap_page(sky2->hw->pdev, + pci_unmap_addr(fre, mapaddr), skb_shinfo(skb)->frags[i].size, PCI_DMA_TODEVICE); } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 1a91c2d4561..95518921001 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1777,10 +1777,15 @@ struct sky2_status_le { u8 opcode; } __attribute((packed)); +struct tx_ring_info { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + u16 idx; +}; + struct ring_info { struct sk_buff *skb; dma_addr_t mapaddr; - u16 idx; }; struct sky2_port { @@ -1790,7 +1795,7 @@ struct sky2_port { u32 msg_enable; spinlock_t tx_lock ____cacheline_aligned_in_smp; - struct ring_info *tx_ring; + struct tx_ring_info *tx_ring; struct sky2_tx_le *tx_le; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ -- cgit v1.2.3-70-g09d2 From 0e3ff6aab1ff2d093996bd7b8c9c06c3d823855c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:02 -0800 Subject: [PATCH] sky2: transmit logic fixes Some transmit side small fixes: * When computing number of list elements per transmit, do full comparision to check for checksuming. * Get rid of racy check for tx_complete * Change stop test to match wake condition. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1eefacbfcd2..8dfd27d4d6e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1051,7 +1051,7 @@ static inline unsigned tx_le_req(const struct sk_buff *skb) if (skb_shinfo(skb)->tso_size) ++count; - if (skb->ip_summed) + if (skb->ip_summed == CHECKSUM_HW) ++count; return count; @@ -1207,7 +1207,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod, &sky2->tx_last_put, TX_RING_SIZE); - if (tx_avail(sky2) < MAX_SKB_TX_LE + 1) + if (tx_avail(sky2) <= MAX_SKB_TX_LE) netif_stop_queue(dev); out_unlock: @@ -1229,8 +1229,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) struct net_device *dev = sky2->netdev; unsigned i; - if (done == sky2->tx_cons) - return; + BUG_ON(done >= TX_RING_SIZE); if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done, up to %u\n", -- cgit v1.2.3-70-g09d2 From 13b97b74b964f9da9b5dab6c57708bccd3ada542 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:03 -0800 Subject: [PATCH] sky2: transmit complete index optimization Change transmit complete handling to use the status values in the poll list because they are in-cache, rather than reading non-cached memory for chips status. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8dfd27d4d6e..ff6557dd079 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1274,7 +1274,7 @@ out: } /* Cleanup all untransmitted buffers, assume transmitter not running */ -static inline void sky2_tx_clean(struct sky2_port *sky2) +static void sky2_tx_clean(struct sky2_port *sky2) { sky2_tx_complete(sky2, sky2->tx_prod); } @@ -1714,14 +1714,16 @@ error: /* * Check for transmit complete */ -static inline void sky2_tx_check(struct sky2_hw *hw, int port) -{ - struct net_device *dev = hw->dev[port]; +#define TX_NO_STATUS 0xffff - if (dev && netif_running(dev)) { - sky2_tx_complete(netdev_priv(dev), - sky2_read16(hw, port == 0 - ? STAT_TXA1_RIDX : STAT_TXA2_RIDX)); +static inline void sky2_tx_check(struct sky2_hw *hw, int port, u16 last) +{ + if (last != TX_NO_STATUS) { + struct net_device *dev = hw->dev[port]; + if (dev && netif_running(dev)) { + struct sky2_port *sky2 = netdev_priv(dev); + sky2_tx_complete(sky2, last); + } } } @@ -1735,6 +1737,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) unsigned int to_do = min(dev0->quota, *budget); unsigned int work_done = 0; u16 hwidx; + u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS }; sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); hwidx = sky2_read16(hw, STAT_PUT_IDX); @@ -1806,7 +1809,10 @@ static int sky2_poll(struct net_device *dev0, int *budget) break; case OP_TXINDEXLE: - /* pick up transmit status later */ + /* TX index reports status for both ports */ + tx_done[0] = status & 0xffff; + tx_done[1] = ((status >> 24) & 0xff) + | (u16)(length & 0xf) << 8; break; default: @@ -1818,16 +1824,13 @@ static int sky2_poll(struct net_device *dev0, int *budget) } exit_loop: - sky2_tx_check(hw, 0); - sky2_tx_check(hw, 1); - mmiowb(); + sky2_tx_check(hw, 0, tx_done[0]); + sky2_tx_check(hw, 1, tx_done[1]); + if (work_done < to_do) { - /* - * Another chip workaround, need to restart TX timer if status - * LE was handled. WA_DEV_43_418 - */ + /* need to restart TX timer */ if (is_ec_a1(hw)) { sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START); -- cgit v1.2.3-70-g09d2 From af2a58acb12f6b19e6f04b730203e199abedc44a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:04 -0800 Subject: [PATCH] sky2: transmit complete routine optimization Hand optimize transmit completion routine. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ff6557dd079..21aeb0c91fa 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1227,6 +1227,8 @@ out_unlock: static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { struct net_device *dev = sky2->netdev; + struct pci_dev *pdev = sky2->hw->pdev; + u16 nxt, put; unsigned i; BUG_ON(done >= TX_RING_SIZE); @@ -1235,39 +1237,34 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) printk(KERN_DEBUG "%s: tx done, up to %u\n", dev->name, done); - spin_lock(&sky2->tx_lock); + for (put = sky2->tx_cons; put != done; put = nxt) { + struct tx_ring_info *re = sky2->tx_ring + put; + struct sk_buff *skb = re->skb; - while (sky2->tx_cons != done) { - struct tx_ring_info *re = sky2->tx_ring + sky2->tx_cons; - struct sk_buff *skb; + nxt = re->idx; + BUG_ON(nxt >= TX_RING_SIZE); /* Check for partial status */ - if (tx_dist(sky2->tx_cons, done) - < tx_dist(sky2->tx_cons, re->idx)) - goto out; + if (tx_dist(put, done) < tx_dist(put, nxt)) + break; skb = re->skb; - pci_unmap_single(sky2->hw->pdev, - pci_unmap_addr(re, mapaddr), + pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), skb_headlen(skb), PCI_DMA_TODEVICE); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { struct tx_ring_info *fre; - fre = - sky2->tx_ring + (sky2->tx_cons + i + - 1) % TX_RING_SIZE; - pci_unmap_page(sky2->hw->pdev, - pci_unmap_addr(fre, mapaddr), - skb_shinfo(skb)->frags[i].size, + fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE; + pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr), + skb_shinfo(skb)->frags[i].size, PCI_DMA_TODEVICE); } dev_kfree_skb_any(skb); - - sky2->tx_cons = re->idx; } -out: + spin_lock(&sky2->tx_lock); + sky2->tx_cons = put; if (netif_queue_stopped(dev) && tx_avail(sky2) > MAX_SKB_TX_LE) netif_wake_queue(dev); spin_unlock(&sky2->tx_lock); @@ -1742,7 +1739,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); - rmb(); + rmb(); while (hwidx != hw->st_idx) { struct sky2_status_le *le = hw->st_le + hw->st_idx; -- cgit v1.2.3-70-g09d2 From 3e4b32e11674a40cf50e48a79764f12988641e20 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:05 -0800 Subject: [PATCH] sky2: interrupt/poll optimization Optimize poll routine by not clearing interrupt till after processing, and checking for more work before re-enable. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 21aeb0c91fa..af9739c1ef5 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1736,7 +1736,6 @@ static int sky2_poll(struct net_device *dev0, int *budget) u16 hwidx; u16 tx_done[2] = { TX_NO_STATUS, TX_NO_STATUS }; - sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); hwidx = sky2_read16(hw, STAT_PUT_IDX); BUG_ON(hwidx >= STATUS_RING_SIZE); rmb(); @@ -1754,8 +1753,6 @@ static int sky2_poll(struct net_device *dev0, int *budget) hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE; prefetch(hw->st_le + hw->st_idx); - BUG_ON(le->link >= hw->ports || !hw->dev[le->link]); - BUG_ON(le->link >= 2); dev = hw->dev[le->link]; if (dev == NULL || !netif_running(dev)) @@ -1821,12 +1818,13 @@ static int sky2_poll(struct net_device *dev0, int *budget) } exit_loop: + sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); mmiowb(); sky2_tx_check(hw, 0, tx_done[0]); sky2_tx_check(hw, 1, tx_done[1]); - if (work_done < to_do) { + if (sky2_read16(hw, STAT_PUT_IDX) == hw->st_idx) { /* need to restart TX timer */ if (is_ec_a1(hw)) { sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP); -- cgit v1.2.3-70-g09d2 From 69634ee7366d05b26b2650584bed180edf923125 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:06 -0800 Subject: [PATCH] sky2: interrupt coalescing tuning Adjust interrupt deferral values for better performance and avoid starvation issues under stress. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index af9739c1ef5..0b82dbba16c 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2115,9 +2115,8 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_Y2LED, LED_STAT_ON); - /* Turn on descriptor polling (every 75us) */ - sky2_write32(hw, B28_DPT_INI, sky2_us2clk(hw, 75)); - sky2_write8(hw, B28_DPT_CTRL, DPT_START); + /* Turn off descriptor polling */ + sky2_write32(hw, B28_DPT_CTRL, DPT_STOP); /* Turn off receive timestamp */ sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP); @@ -2162,8 +2161,6 @@ static int sky2_reset(struct sky2_hw *hw) /* Set the list last index */ sky2_write16(hw, STAT_LAST_IDX, STATUS_RING_SIZE - 1); - sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); - /* These status setup values are copied from SysKonnect's driver */ if (is_ec_a1(hw)) { /* WA for dev. #4.3 */ @@ -2174,21 +2171,20 @@ static int sky2_reset(struct sky2_hw *hw) /* set Status-FIFO ISR watermark */ sky2_write8(hw, STAT_FIFO_ISR_WM, 0x07); /* WA for dev. #4.18 */ - + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 10000)); } else { - sky2_write16(hw, STAT_TX_IDX_TH, 0x000a); - - /* set Status-FIFO watermark */ - sky2_write8(hw, STAT_FIFO_WM, 0x10); + sky2_write16(hw, STAT_TX_IDX_TH, 10); + sky2_write8(hw, STAT_FIFO_WM, 16); /* set Status-FIFO ISR watermark */ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0) - sky2_write8(hw, STAT_FIFO_ISR_WM, 0x10); - - else /* WA dev 4.109 */ - sky2_write8(hw, STAT_FIFO_ISR_WM, 0x04); + sky2_write8(hw, STAT_FIFO_ISR_WM, 4); + else + sky2_write8(hw, STAT_FIFO_ISR_WM, 16); - sky2_write32(hw, STAT_ISR_TIMER_INI, 0x0190); + sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000)); + sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100)); + sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20)); } /* enable status unit */ -- cgit v1.2.3-70-g09d2 From 8cc048e338ad4034255f3ff72ef1f631963e1263 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:07 -0800 Subject: [PATCH] sky2: handle tx timeout Put more logic in to try and handle transmit timeout recovery. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0b82dbba16c..e1733aa1779 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -661,7 +661,7 @@ static void sky2_qset(struct sky2_hw *hw, u16 q) /* Setup prefetch unit registers. This is the interface between * hardware and driver list elements */ -static inline void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, +static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, u64 addr, u32 last) { sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); @@ -1558,14 +1558,25 @@ out: static void sky2_tx_timeout(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned txq = txqaddr[sky2->port]; if (netif_msg_timer(sky2)) printk(KERN_ERR PFX "%s: tx timeout\n", dev->name); - sky2_write32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR), BMU_STOP); - sky2_read32(sky2->hw, Q_ADDR(txqaddr[sky2->port], Q_CSR)); + netif_stop_queue(dev); + + sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); + sky2_read32(hw, Q_ADDR(txq, Q_CSR)); + + sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); sky2_tx_clean(sky2); + + sky2_qset(hw, txq); + sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); + + netif_wake_queue(dev); } -- cgit v1.2.3-70-g09d2 From 8c463ef7928d7a42bb9ca410df9b294dc01c1850 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:08 -0800 Subject: [PATCH] sky2: quiet ring full message in case of race Don't print ring full message if we lose race. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e1733aa1779..54947ae9948 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1081,11 +1081,16 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_LOCKED; if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { - netif_stop_queue(dev); + /* There is a known but harmless race with lockless tx + * and netif_stop_queue. + */ + if (!netif_queue_stopped(dev)) { + netif_stop_queue(dev); + printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", + dev->name); + } spin_unlock(&sky2->tx_lock); - printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", - dev->name); return NETDEV_TX_BUSY; } -- cgit v1.2.3-70-g09d2 From d70cd51ac0585a9273abea4c333e8f0dd8385d27 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:09 -0800 Subject: [PATCH] sky2: prefetch tuning Add a couple more prefetches to where we walk the rings. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 54947ae9948..39916e7cf6f 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -1248,6 +1249,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) nxt = re->idx; BUG_ON(nxt >= TX_RING_SIZE); + prefetch(sky2->tx_ring + nxt); /* Check for partial status */ if (tx_dist(put, done) < tx_dist(put, nxt)) @@ -1659,6 +1661,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, sky2->netdev->name, sky2->rx_next, status, length); sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; + prefetch(sky2->rx_ring + sky2->rx_next); if (status & GMR_FS_ANY_ERR) goto error; -- cgit v1.2.3-70-g09d2 From 585b56012f08a6edc598d17b28a6c434134bfaff Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:10 -0800 Subject: [PATCH] sky2: turn on tx flow control Turn symmetric flow control on by default. This was an oversight in the initial versions. Signed-off-by: Stephen HEmminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 39916e7cf6f..cdcbf727f88 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2921,7 +2921,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->tx_lock); /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; - sky2->tx_pause = 0; + sky2->tx_pause = 1; sky2->rx_pause = 1; sky2->duplex = -1; sky2->speed = -1; -- cgit v1.2.3-70-g09d2 From 75d070c56fa77913b165947f046304efcd38e516 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:11 -0800 Subject: [PATCH] sky2: disable rx checksum on Yukon XL Under load, my SysKonnect SK-9S22 sees duplicate checksums from earlier packets. Doesn't happen on other platforms so just disable receive checksum there. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index cdcbf727f88..b9c0aafb031 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2926,7 +2926,13 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->duplex = -1; sky2->speed = -1; sky2->advertising = sky2_supported_modes(hw); - sky2->rx_csum = 1; + + /* Receive checksum disabled for Yukon XL + * because of observed problems with incorrect + * values when multiple packets are received in one interrupt + */ + sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL); + INIT_WORK(&sky2->phy_task, sky2_phy_task, sky2); init_MUTEX(&sky2->phy_sema); sky2->tx_pending = TX_DEF_PENDING; -- cgit v1.2.3-70-g09d2 From fed954dafc0ab03e00501862df397e8f8e2211fd Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Dec 2005 11:35:12 -0800 Subject: [PATCH] sky2: version 0.10 Change version number. Still don't have enough history on this to call it 1.0 yet. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index b9c0aafb031..7af72cdd473 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -57,7 +57,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.9" +#define DRV_VERSION "0.10" #define PFX DRV_NAME " " /* -- cgit v1.2.3-70-g09d2 From d96212ed87d032d2d830e265aae14038dc1f8ad8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 8 Dec 2005 19:19:50 +0000 Subject: [PATCH] libata: add ata_piix notes Ok lets start with the 'easy' stuff. This includes my research and summary of chip errata into the new driver so that people can refer to it when updating ata_piix. No code changes Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 887b2b9ee4a..908ff1f9671 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -37,6 +37,49 @@ * * Hardware documentation available at http://developer.intel.com/ * + * Documentation + * Publically available from Intel web site. Errata documentation + * is also publically available. As an aide to anyone hacking on this + * driver the list of errata that are relevant is below.going back to + * PIIX4. Older device documentation is now a bit tricky to find. + * + * The chipsets all follow very much the same design. The orginal Triton + * series chipsets do _not_ support independant device timings, but this + * is fixed in Triton II. With the odd mobile exception the chips then + * change little except in gaining more modes until SATA arrives. This + * driver supports only the chips with independant timing (that is those + * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix + * for the early chip drivers. + * + * Errata of note: + * + * Unfixable + * PIIX4 errata #9 - Only on ultra obscure hw + * ICH3 errata #13 - Not observed to affect real hw + * by Intel + * + * Things we must deal with + * PIIX4 errata #10 - BM IDE hang with non UDMA + * (must stop/start dma to recover) + * 440MX errata #15 - As PIIX4 errata #10 + * PIIX4 errata #15 - Must not read control registers + * during a PIO transfer + * 440MX errata #13 - As PIIX4 errata #15 + * ICH2 errata #21 - DMA mode 0 doesn't work right + * ICH0/1 errata #55 - As ICH2 errata #21 + * ICH2 spec c #9 - Extra operations needed to handle + * drive hotswap [NOT YET SUPPORTED] + * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary + * and must be dword aligned + * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * + * Should have been BIOS fixed: + * 450NX: errata #19 - DMA hangs on old 450NX + * 450NX: errata #20 - DMA hangs on old 450NX + * 450NX: errata #25 - Corruption with DMA on old 450NX + * ICH3 errata #15 - IDE deadlock under high load + * (BIOS must set dev 31 fn 0 bit 23) + * ICH3 errata #18 - Don't use native mode */ #include -- cgit v1.2.3-70-g09d2 From c621b140603dfb4a89809e00f965d42c054871e0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 8 Dec 2005 19:22:28 +0000 Subject: [PATCH] libata: ata_piix 450NX errata Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/scsi/ata_piix.c | 44 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 908ff1f9671..0ea27873b9f 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -619,6 +619,40 @@ static int piix_disable_ahci(struct pci_dev *pdev) return rc; } +/** + * piix_check_450nx_errata - Check for problem 450NX setup + * + * Check for the present of 450NX errata #19 and errata #25. If + * they are found return an error code so we can turn off DMA + */ + +static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) +{ + struct pci_dev *pdev = NULL; + u16 cfg; + u8 rev; + int no_piix_dma = 0; + + while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL) + { + /* Look for 450NX PXB. Check for problem configurations + A PCI quirk checks bit 6 already */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); + pci_read_config_word(pdev, 0x41, &cfg); + /* Only on the original revision: IDE DMA can hang */ + if(rev == 0x00) + no_piix_dma = 1; + /* On all revisions below 5 PXB bus lock must be disabled for IDE */ + else if(cfg & (1<<14) && rev < 5) + no_piix_dma = 2; + } + if(no_piix_dma) + dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); + if(no_piix_dma == 2) + dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); + return no_piix_dma; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -693,7 +727,15 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) "combined mode detected (p=%u, s=%u)\n", pata_chan, sata_chan); } - + if (piix_check_450nx_errata(pdev)) { + /* This writes into the master table but it does not + really matter for this errata as we will apply it to + all the PIIX devices on the board */ + port_info[0]->mwdma_mask = 0; + port_info[0]->udma_mask = 0; + port_info[1]->mwdma_mask = 0; + port_info[1]->udma_mask = 0; + } return ata_pci_init_one(pdev, port_info, 2); } -- cgit v1.2.3-70-g09d2 From fd803241744ad6e4262b6588c6af89e8fb794098 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Tue, 13 Dec 2005 00:06:22 -0500 Subject: e1000: Fixes for 8357x - TSO workaround - Fixes eeprom version reporting - Fix loopback test - Fix for WOL Signed-off-by: Jeff Kirsher Signed-off-by: John Ronciak Signed-off-by: Jesse Brandeburg --- drivers/net/e1000/e1000.h | 4 +- drivers/net/e1000/e1000_ethtool.c | 95 +++++++++++++++++++++++++++++---------- drivers/net/e1000/e1000_hw.c | 67 +++++++++++++++++++-------- drivers/net/e1000/e1000_hw.h | 4 +- drivers/net/e1000/e1000_main.c | 64 ++++++++++---------------- 5 files changed, 150 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 3f653a93e1b..e02e9ba2e18 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -188,11 +188,13 @@ struct e1000_tx_ring { /* array of buffer information structs */ struct e1000_buffer *buffer_info; - struct e1000_buffer previous_buffer_info; spinlock_t tx_lock; uint16_t tdh; uint16_t tdt; uint64_t pkt; + + boolean_t last_tx_tso; + }; struct e1000_rx_ring { diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8646914964e..c88f1a3c1b1 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -562,10 +562,29 @@ e1000_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) { struct e1000_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + uint16_t eeprom_data; strncpy(drvinfo->driver, e1000_driver_name, 32); strncpy(drvinfo->version, e1000_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); + + /* EEPROM image version # is reported as firware version # for + * 8257{1|2|3} controllers */ + e1000_read_eeprom(&adapter->hw, 5, 1, &eeprom_data); + switch (adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + case e1000_82573: + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + break; + default: + sprintf(firmware_version, "n/a"); + } + + strncpy(drvinfo->fw_version, firmware_version, 32); strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); drvinfo->n_stats = E1000_STATS_LEN; drvinfo->testinfo_len = E1000_TEST_LEN; @@ -1309,21 +1328,32 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter) { uint32_t rctl; + struct e1000_hw *hw = &adapter->hw; - if(adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { - if(adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3) + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac_type) { + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: return e1000_set_phy_loopback(adapter); - else { - rctl = E1000_READ_REG(&adapter->hw, RCTL); + break; + case e1000_82571: + case e1000_82572: +#define E1000_SERDES_LB_ON 0x410 + e1000_set_phy_loopback(adapter); + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); + msec_delay(10); + return 0; + break; + default: + rctl = E1000_READ_REG(hw, RCTL); rctl |= E1000_RCTL_LBM_TCVR; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + E1000_WRITE_REG(hw, RCTL, rctl); return 0; } - } else if(adapter->hw.media_type == e1000_media_type_copper) + } else if (hw->media_type == e1000_media_type_copper) return e1000_set_phy_loopback(adapter); return 7; @@ -1334,25 +1364,36 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) { uint32_t rctl; uint16_t phy_reg; + struct e1000_hw *hw = &adapter->hw; rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if(adapter->hw.media_type == e1000_media_type_copper || - ((adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) && - (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 || - adapter->hw.mac_type == e1000_82545_rev_3 || - adapter->hw.mac_type == e1000_82546_rev_3))) { - adapter->hw.autoneg = TRUE; - e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_reg); - if(phy_reg & MII_CR_LOOPBACK) { + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes){ +#define E1000_SERDES_LB_OFF 0x400 + E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); + msec_delay(10); + break; + } + /* fall thru for Cu adapters */ + case e1000_82545: + case e1000_82546: + case e1000_82545_rev_3: + case e1000_82546_rev_3: + default: + hw->autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { phy_reg &= ~MII_CR_LOOPBACK; - e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_reg); - e1000_phy_reset(&adapter->hw); + e1000_write_phy_reg(hw, PHY_CTRL, phy_reg); + e1000_phy_reset(hw); } + break; } } @@ -1681,6 +1722,14 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) msleep_interruptible(data * 1000); del_timer_sync(&adapter->blink_timer); } + else if(adapter->hw.mac_type < e1000_82573) { + E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | + E1000_LEDCTL_LED0_BLINK | E1000_LEDCTL_LED2_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED2_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LINK_ACTIVITY << E1000_LEDCTL_LED0_MODE_SHIFT) | + (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED1_MODE_SHIFT))); + msleep_interruptible(data * 1000); + } else { E1000_WRITE_REG(&adapter->hw, LEDCTL, (E1000_LEDCTL_LED2_BLINK_RATE | E1000_LEDCTL_LED1_BLINK | E1000_LEDCTL_LED2_BLINK | diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index a267c5235fc..136fc031e4a 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -563,11 +563,13 @@ e1000_reset_hw(struct e1000_hw *hw) msec_delay(20); break; case e1000_82573: - udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + } /* fall through */ case e1000_82571: case e1000_82572: @@ -844,19 +846,27 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { - DEBUGOUT("EEPROM Read Error\n"); - return -E1000_ERR_EEPROM; - } - - if(hw->fc == e1000_fc_default) { - if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; - else if((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == - EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; - else + if (hw->fc == e1000_fc_default) { + switch (hw->mac_type) { + case e1000_82573: hw->fc = e1000_fc_full; + break; + default: + ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, + 1, &eeprom_data); + if (ret_val) { + DEBUGOUT("EEPROM Read Error\n"); + return -E1000_ERR_EEPROM; + } + if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) + hw->fc = e1000_fc_none; + else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == + EEPROM_WORD0F_ASM_DIR) + hw->fc = e1000_fc_tx_pause; + else + hw->fc = e1000_fc_full; + break; + } } /* We want to save off the original Flow Control configuration just @@ -2962,13 +2972,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if(hw->mac_type > e1000_82543) { /* Read the device control register and assert the E1000_CTRL_PHY_RST * bit. Then, take it out of reset. + * For pre-e1000_82571 hardware, we delay for 10ms between the assert + * and deassert. For e1000_82571 hardware and later, we instead delay + * for 10ms after the deassertion. */ ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST); E1000_WRITE_FLUSH(hw); - msec_delay(10); + + if (hw->mac_type < e1000_82571) + msec_delay(10); + E1000_WRITE_REG(hw, CTRL, ctrl); E1000_WRITE_FLUSH(hw); + + if (hw->mac_type >= e1000_82571) + msec_delay(10); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR * bit to put the PHY into reset. Then, take it out of reset. @@ -5278,9 +5297,13 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; - case e1000_82571: case e1000_82572: case e1000_82573: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_1; + break; + case e1000_82571: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; hw->bus_width = e1000_bus_width_pciex_4; @@ -6650,6 +6673,12 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) break; } + /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high. + * Need to wait for PHY configuration completion before accessing NVM + * and PHY. */ + if (hw->mac_type == e1000_82573) + msec_delay(25); + return E1000_SUCCESS; } diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 76ce12809a1..7caa35748ce 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -123,6 +123,7 @@ typedef enum { e1000_bus_width_32, e1000_bus_width_64, e1000_bus_width_pciex_1, + e1000_bus_width_pciex_2, e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -149,6 +150,7 @@ typedef enum { e1000_igp_cable_length_90 = 90, e1000_igp_cable_length_100 = 100, e1000_igp_cable_length_110 = 110, + e1000_igp_cable_length_115 = 115, e1000_igp_cable_length_120 = 120, e1000_igp_cable_length_130 = 130, e1000_igp_cable_length_140 = 140, @@ -1457,6 +1459,7 @@ struct e1000_hw { #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SECVAL_SHIFT 22 #define E1000_STM_OPCODE 0xDB00 #define E1000_HICR_FW_RESET 0xC0 @@ -1951,7 +1954,6 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 -#define E1000_GCR_BEM32 0x00400000 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index e0ae248b431..438a931fd55 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -711,6 +711,7 @@ e1000_probe(struct pci_dev *pdev, break; case e1000_82546: case e1000_82546_rev_3: + case e1000_82571: if((E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1) && (adapter->hw.media_type == e1000_media_type_copper)) { e1000_read_eeprom(&adapter->hw, @@ -1158,7 +1159,6 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter, return -ENOMEM; } memset(txdr->buffer_info, 0, size); - memset(&txdr->previous_buffer_info, 0, sizeof(struct e1000_buffer)); /* round up to nearest 4K */ @@ -1813,11 +1813,6 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, /* Free all the Tx ring sk_buffs */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(i = 0; i < tx_ring->count; i++) { buffer_info = &tx_ring->buffer_info[i]; e1000_unmap_and_free_tx_resource(adapter, buffer_info); @@ -1832,6 +1827,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter, tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; + tx_ring->last_tx_tso = 0; writel(0, adapter->hw.hw_addr + tx_ring->tdh); writel(0, adapter->hw.hw_addr + tx_ring->tdt); @@ -2437,6 +2433,16 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); #ifdef NETIF_F_TSO + /* Workaround for Controller erratum -- + * descriptor for non-tso packet in a linear SKB that follows a + * tso gets written back prematurely before the data is fully + * DMAd to the controller */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) { + tx_ring->last_tx_tso = 0; + size -= 4; + } + /* Workaround for premature desc write-backs * in TSO mode. Append 4-byte sentinel desc */ if(unlikely(mss && !nr_frags && size == len && size > 8)) @@ -2693,6 +2699,14 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(skb->ip_summed == CHECKSUM_HW) count++; #endif + +#ifdef NETIF_F_TSO + /* Controller Erratum workaround */ + if (!skb->data_len && tx_ring->last_tx_tso && + !skb_shinfo(skb)->tso_size) + count++; +#endif + count += TXD_USE_COUNT(len, max_txd_pwr); if(adapter->pcix_82544) @@ -2774,9 +2788,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_OK; } - if (likely(tso)) + if (likely(tso)) { + tx_ring->last_tx_tso = 1; tx_flags |= E1000_TX_FLAGS_TSO; - else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) + } else if (likely(e1000_tx_csum(adapter, tx_ring, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. @@ -3227,37 +3242,12 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, eop_desc = E1000_TX_DESC(*tx_ring, eop); while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* Premature writeback of Tx descriptors clear (free buffers - * and unmap pci_mapping) previous_buffer_info */ - if (likely(tx_ring->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, - &tx_ring->previous_buffer_info); - } - for(cleaned = FALSE; !cleaned; ) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); -#ifdef NETIF_F_TSO - if (!(netdev->features & NETIF_F_TSO)) { -#endif - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); -#ifdef NETIF_F_TSO - } else { - if (cleaned) { - memcpy(&tx_ring->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, 0, - sizeof(struct e1000_buffer)); - } else { - e1000_unmap_and_free_tx_resource( - adapter, buffer_info); - } - } -#endif + e1000_unmap_and_free_tx_resource(adapter, buffer_info); tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; @@ -3318,12 +3308,6 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } -#ifdef NETIF_F_TSO - if (unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && - time_after(jiffies, tx_ring->previous_buffer_info.time_stamp + HZ))) - e1000_unmap_and_free_tx_resource( - adapter, &tx_ring->previous_buffer_info); -#endif return cleaned; } -- cgit v1.2.3-70-g09d2 From a2a7a662f80d8b7f2295a36de1f9b033ed0b910c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Dec 2005 14:48:31 +0900 Subject: [PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/libata.h | 2 + 2 files changed, 101 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index a0060cf31e0..de80abeab06 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1046,6 +1046,105 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) return modes; } +struct ata_exec_internal_arg { + unsigned int err_mask; + struct ata_taskfile *tf; + struct completion *waiting; +}; + +int ata_qc_complete_internal(struct ata_queued_cmd *qc) +{ + struct ata_exec_internal_arg *arg = qc->private_data; + struct completion *waiting = arg->waiting; + + if (!(qc->err_mask & ~AC_ERR_DEV)) + qc->ap->ops->tf_read(qc->ap, arg->tf); + arg->err_mask = qc->err_mask; + arg->waiting = NULL; + complete(waiting); + + return 0; +} + +/** + * ata_exec_internal - execute libata internal command + * @ap: Port to which the command is sent + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @dma_dir: Data tranfer direction of the command + * @buf: Data buffer of the command + * @buflen: Length of data buffer + * + * Executes libata internal command with timeout. @tf contains + * command on entry and result on return. Timeout and error + * conditions are reported via return value. No recovery action + * is taken after a command times out. It's caller's duty to + * clean up after timeout. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + */ + +static unsigned +ata_exec_internal(struct ata_port *ap, struct ata_device *dev, + struct ata_taskfile *tf, + int dma_dir, void *buf, unsigned int buflen) +{ + u8 command = tf->command; + struct ata_queued_cmd *qc; + DECLARE_COMPLETION(wait); + unsigned long flags; + struct ata_exec_internal_arg arg; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf = *tf; + qc->dma_dir = dma_dir; + if (dma_dir != DMA_NONE) { + ata_sg_init_one(qc, buf, buflen); + qc->nsect = buflen / ATA_SECT_SIZE; + } + + arg.waiting = &wait; + arg.tf = tf; + qc->private_data = &arg; + qc->complete_fn = ata_qc_complete_internal; + + if (ata_qc_issue(qc)) + goto issue_fail; + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) { + spin_lock_irqsave(&ap->host_set->lock, flags); + + /* We're racing with irq here. If we lose, the + * following test prevents us from completing the qc + * again. If completion irq occurs after here but + * before the caller cleans up, it will result in a + * spurious interrupt. We can live with that. + */ + if (arg.waiting) { + qc->err_mask = AC_ERR_OTHER; + ata_qc_complete(qc); + printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", + ap->id, command); + } + + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } + + return arg.err_mask; + + issue_fail: + ata_qc_free(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + return AC_ERR_OTHER; +} + static int ata_qc_wait_err(struct ata_queued_cmd *qc, struct completion *wait) { diff --git a/include/linux/libata.h b/include/linux/libata.h index e18ce039cdf..833e57afd54 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -135,6 +135,8 @@ enum { ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* hueristic */ ATA_TMOUT_CDB = 30 * HZ, ATA_TMOUT_CDB_QUICK = 5 * HZ, + ATA_TMOUT_INTERNAL = 30 * HZ, + ATA_TMOUT_INTERNAL_QUICK = 5 * HZ, /* ATA bus states */ BUS_UNKNOWN = 0, -- cgit v1.2.3-70-g09d2 From a012370322eafee642369784ff71afe81f5a8592 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Dec 2005 14:49:31 +0900 Subject: [PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 145 ++++++++++++++------------------------------- 1 file changed, 44 insertions(+), 101 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index de80abeab06..01070366bb1 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1198,9 +1198,8 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) u16 tmp; unsigned long xfer_modes; unsigned int using_edd; - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; + struct ata_taskfile tf; + unsigned int err_mask; int rc; if (!ata_dev_present(dev)) { @@ -1221,40 +1220,26 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device) ata_dev_select(ap, device, 1, 1); /* select device 0/1 */ - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - ata_sg_init_one(qc, dev->id, sizeof(dev->id)); - qc->dma_dir = DMA_FROM_DEVICE; - qc->tf.protocol = ATA_PROT_PIO; - qc->nsect = 1; - retry: + ata_tf_init(ap, &tf, device); + if (dev->class == ATA_DEV_ATA) { - qc->tf.command = ATA_CMD_ID_ATA; + tf.command = ATA_CMD_ID_ATA; DPRINTK("do ATA identify\n"); } else { - qc->tf.command = ATA_CMD_ID_ATAPI; + tf.command = ATA_CMD_ID_ATAPI; DPRINTK("do ATAPI identify\n"); } - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + tf.protocol = ATA_PROT_PIO; - if (rc) - goto err_out; - else - ata_qc_wait_err(qc, &wait); + err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, + dev->id, sizeof(dev->id)); - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->ops->tf_read(ap, &qc->tf); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + if (err_mask) { + if (err_mask & ~AC_ERR_DEV) + goto err_out; - if (qc->tf.command & ATA_ERR) { /* * arg! EDD works for all test cases, but seems to return * the ATA signature for some ATAPI devices. Until the @@ -1267,14 +1252,9 @@ retry: * to have this problem. */ if ((using_edd) && (dev->class == ATA_DEV_ATA)) { - u8 err = qc->tf.feature; + u8 err = tf.feature; if (err & ATA_ABORTED) { dev->class = ATA_DEV_ATAPI; - qc->cursg = 0; - qc->cursg_ofs = 0; - qc->cursect = 0; - qc->nsect = 1; - qc->err_mask = 0; goto retry; } } @@ -2378,34 +2358,23 @@ static int ata_choose_xfer_mode(const struct ata_port *ap, static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) { - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - int rc; - unsigned long flags; + struct ata_taskfile tf; /* set up set-features taskfile */ DPRINTK("set features - xfer mode\n"); - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - qc->tf.command = ATA_CMD_SET_FEATURES; - qc->tf.feature = SETFEATURES_XFER; - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.protocol = ATA_PROT_NODATA; - qc->tf.nsect = dev->xfer_mode; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + ata_tf_init(ap, &tf, dev->devno); + tf.command = ATA_CMD_SET_FEATURES; + tf.feature = SETFEATURES_XFER; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = dev->xfer_mode; - if (rc) + if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { + printk(KERN_ERR "ata%u: failed to set xfermode, disabled\n", + ap->id); ata_port_disable(ap); - else - ata_qc_wait_err(qc, &wait); + } DPRINTK("EXIT\n"); } @@ -2420,41 +2389,25 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) { - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); + struct ata_taskfile tf; - ata_sg_init_one(qc, dev->id, sizeof(dev->id)); - qc->dma_dir = DMA_FROM_DEVICE; + ata_tf_init(ap, &tf, dev->devno); if (dev->class == ATA_DEV_ATA) { - qc->tf.command = ATA_CMD_ID_ATA; + tf.command = ATA_CMD_ID_ATA; DPRINTK("do ATA identify\n"); } else { - qc->tf.command = ATA_CMD_ID_ATAPI; + tf.command = ATA_CMD_ID_ATAPI; DPRINTK("do ATAPI identify\n"); } - qc->tf.flags |= ATA_TFLAG_DEVICE; - qc->tf.protocol = ATA_PROT_PIO; - qc->nsect = 1; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_PIO; - if (rc) + if (ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, + dev->id, sizeof(dev->id))) goto err_out; - ata_qc_wait_err(qc, &wait); - swap_buf_le16(dev->id, ATA_ID_WORDS); ata_dump_id(dev); @@ -2463,6 +2416,7 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) return; err_out: + printk(KERN_ERR "ata%u: failed to reread ID, disabled\n", ap->id); ata_port_disable(ap); } @@ -2476,10 +2430,7 @@ err_out: static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) { - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - int rc; - unsigned long flags; + struct ata_taskfile tf; u16 sectors = dev->id[6]; u16 heads = dev->id[3]; @@ -2490,26 +2441,18 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) /* set up init dev params taskfile */ DPRINTK("init dev params \n"); - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.protocol = ATA_PROT_NODATA; - qc->tf.nsect = sectors; - qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); + ata_tf_init(ap, &tf, dev->devno); + tf.command = ATA_CMD_INIT_DEV_PARAMS; + tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + tf.nsect = sectors; + tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - if (rc) + if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { + printk(KERN_ERR "ata%u: failed to init parameters, disabled\n", + ap->id); ata_port_disable(ap); - else - ata_qc_wait_err(qc, &wait); + } DPRINTK("EXIT\n"); } -- cgit v1.2.3-70-g09d2 From 82033adf0a4b26eb0c0c90e224848431e2a59bc6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Dec 2005 14:50:38 +0900 Subject: [PATCH] libata: remove unused functions There is no user of ata_qc_wait_err() and ata_qc_complete_noop() after ata_exec_internal() changes. Remove unused functions. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 29 ----------------------------- drivers/scsi/libata.h | 1 - 2 files changed, 30 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 01070366bb1..1c4dbf3e981 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1145,30 +1145,6 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, return AC_ERR_OTHER; } -static int ata_qc_wait_err(struct ata_queued_cmd *qc, - struct completion *wait) -{ - int rc = 0; - - if (wait_for_completion_timeout(wait, 30 * HZ) < 1) { - /* timeout handling */ - qc->err_mask |= ac_err_mask(ata_chk_status(qc->ap)); - - if (!qc->err_mask) { - printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n", - qc->ap->id, qc->tf.command); - } else { - printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n", - qc->ap->id, qc->tf.command); - rc = -EIO; - } - - ata_qc_complete(qc); - } - - return rc; -} - /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -3524,11 +3500,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -int ata_qc_complete_noop(struct ata_queued_cmd *qc) -{ - return 0; -} - static void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 686255df76b..251e53bdc6e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,7 +39,6 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; -extern int ata_qc_complete_noop(struct ata_queued_cmd *qc); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc); -- cgit v1.2.3-70-g09d2 From b5632303401c231bf270ef36f1013e52caf4caf9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Dec 2005 14:51:25 +0900 Subject: [PATCH] libata: remove unused qc->waiting There is no user of qc->waiting left after ata_exec_internal() changes. Kill the field. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 14 ++------------ include/linux/libata.h | 2 -- 2 files changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1c4dbf3e981..9ea10258791 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3503,7 +3503,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, static void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - unsigned int tag, do_clear = 0; + unsigned int tag; qc->flags = 0; tag = qc->tag; @@ -3511,17 +3511,8 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) if (tag == ap->active_tag) ap->active_tag = ATA_TAG_POISON; qc->tag = ATA_TAG_POISON; - do_clear = 1; - } - - if (qc->waiting) { - struct completion *waiting = qc->waiting; - qc->waiting = NULL; - complete(waiting); - } - - if (likely(do_clear)) clear_bit(tag, &ap->qactive); + } } /** @@ -3537,7 +3528,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) void ata_qc_free(struct ata_queued_cmd *qc) { assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ - assert(qc->waiting == NULL); /* nothing should be waiting */ __ata_qc_complete(qc); } diff --git a/include/linux/libata.h b/include/linux/libata.h index 833e57afd54..46337e71613 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -285,8 +285,6 @@ struct ata_queued_cmd { ata_qc_cb_t complete_fn; - struct completion *waiting; - void *private_data; }; -- cgit v1.2.3-70-g09d2 From 2bd0fa3b62e8565a80f9535e0f2bd51bba46213f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 13 Dec 2005 03:05:03 -0500 Subject: [PATCH] add boot option to control Intel SATA/PATA combined mode Combined mode sucks. Especially when both libata and the legacy IDE drivers try to drive ports on the same device, since that makes DMA rather difficult. This patch addresses the problem by allowing the user to control which driver binds to the ports in a combined mode configuration. In many cases, they'll probably want the libata driver to control both ports since it can use DMA for talking with ATAPI devices (when libata.atapi_enabled=1 of course). It also allows the user to get old school behavior by letting the legacy IDE driver bind to both ports. But neither is forced, the patch doesn't change current behavior unless one of combined_mode=ide or combined_mode=libata is passed on the boot line. Either of those options may require you to access your devices via different device nodes (/dev/hd* in the ide case and /dev/sd* in the libata case), though of course if you have udev installed nicely you may not notice anything. :) Let me know if the documentation is too cryptic, I'd be happy to expand on it if necessary. I think most users will want to boot with 'combined_mode=libata' and add 'options libata atapi_enabled=1' to their modules.conf to get good DVD playing and disk behavior (haven't tested CD or DVD writing though). I'd much rather things behave sanely by default (i.e. DMA for devices on both ports), but apparently that's difficult given the various chip bugs and hardware configs out there (not to mention that people's drives may suddenly change from /dev/hdc to /dev/sdb), so this boot option may be the correct long term fix. Signed-off-by: Jesse Barnes Signed-off-by: Jeff Garzik --- Documentation/kernel-parameters.txt | 8 ++++++++ drivers/pci/quirks.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+) (limited to 'drivers') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5dffcfefc3c..61a56b100c6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -633,6 +633,14 @@ running once the system is up. inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver Format: + combined_mode= [HW] control which driver uses IDE ports in combined + mode: legacy IDE driver, libata, or both + (in the libata case, libata.atapi_enabled=1 may be + useful as well). Note that using the ide or libata + options may affect your device naming (e.g. by + changing hdc to sdb). + Format: combined (default), ide, or libata + inttest= [IA64] io7= [HW] IO7 for Marvel based alpha systems diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 3a4f49f4eff..f28ebdd3958 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1098,6 +1098,23 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic ); #endif +enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 }; +/* Defaults to combined */ +static enum ide_combined_type combined_mode; + +static int __init combined_setup(char *str) +{ + if (!strncmp(str, "ide", 3)) + combined_mode = IDE; + else if (!strncmp(str, "libata", 6)) + combined_mode = LIBATA; + else /* "combined" or anything else defaults to old behavior */ + combined_mode = COMBINED; + + return 1; +} +__setup("combined_mode=", combined_setup); + #ifdef CONFIG_SCSI_SATA_INTEL_COMBINED static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) { @@ -1164,6 +1181,19 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev) if (prog & comb) return; + /* Don't reserve any so the IDE driver can get them (but only if + * combined_mode=ide). + */ + if (combined_mode == IDE) + return; + + /* Grab them both for libata if combined_mode=libata. */ + if (combined_mode == LIBATA) { + request_region(0x1f0, 8, "libata"); /* port 0 */ + request_region(0x170, 8, "libata"); /* port 1 */ + return; + } + /* SATA port is in legacy mode. Reserve port so that * IDE driver does not attempt to use it. If request_region * fails, it will be obvious at boot time, so we don't bother -- cgit v1.2.3-70-g09d2 From 3492b328834319c9503c0a34c50fb3f009556443 Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Thu, 17 Nov 2005 13:13:31 -0500 Subject: [SCSI] megaraid_legacy: removed PCI ID overlap from the driv er This patch fixes - PCI ID overlap issue - node name changed to 'megaraid_legacy' I hope this patch addresses concerns brought by Daniel Drake. Signed-off by: Seokmann Ju Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f9792528e33..9fa41ccadef 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -2,7 +2,7 @@ * * Linux MegaRAID device driver * - * Copyright © 2002 LSI Logic Corporation. + * Copyright (c) 2002 LSI Logic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -17,7 +17,8 @@ * Copyright (c) 2003 Christoph Hellwig * - new-style, hotplug-aware pci probing and scsi registration * - * Version : v2.00.3 (Feb 19, 2003) - Atul Mukker + * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju + * * * Description: Linux device driver for LSI Logic MegaRAID controller * @@ -51,10 +52,10 @@ #include "megaraid.h" -#define MEGARAID_MODULE_VERSION "2.00.3" +#define MEGARAID_MODULE_VERSION "2.00.4" -MODULE_AUTHOR ("LSI Logic Corporation"); -MODULE_DESCRIPTION ("LSI Logic MegaRAID driver"); +MODULE_AUTHOR ("sju@lsil.com"); +MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver"); MODULE_LICENSE ("GPL"); MODULE_VERSION(MEGARAID_MODULE_VERSION); @@ -4553,7 +4554,7 @@ mega_internal_done(Scsi_Cmnd *scmd) static struct scsi_host_template megaraid_template = { .module = THIS_MODULE, .name = "MegaRAID", - .proc_name = "megaraid", + .proc_name = "megaraid_legacy", .info = megaraid_info, .queuecommand = megaraid_queue, .bios_param = megaraid_biosparam, @@ -5037,22 +5038,12 @@ megaraid_shutdown(struct pci_dev *pdev) } static struct pci_device_id megaraid_pci_tbl[] = { - {PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DISCOVERY, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_PERC4_DI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, BOARD_64BIT}, - {PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_PERC4_QC_VERDE, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, BOARD_64BIT}, {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0,} }; MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl); @@ -5095,7 +5086,7 @@ static int __init megaraid_init(void) * First argument (major) to register_chrdev implies a dynamic * major number allocation. */ - major = register_chrdev(0, "megadev", &megadev_fops); + major = register_chrdev(0, "megadev_legacy", &megadev_fops); if (!major) { printk(KERN_WARNING "megaraid: failed to register char device\n"); @@ -5109,7 +5100,7 @@ static void __exit megaraid_exit(void) /* * Unregister the character device interface to the driver. */ - unregister_chrdev(major, "megadev"); + unregister_chrdev(major, "megadev_legacy"); pci_unregister_driver(&megaraid_pci_driver); -- cgit v1.2.3-70-g09d2 From ed7e8ef7f12f5c3c8bbb85eeb0a1ded91c7c5dbf Mon Sep 17 00:00:00 2001 From: "Ju, Seokmann" Date: Thu, 17 Nov 2005 13:17:25 -0500 Subject: [SCSI] megaraid_{mbox,mm} : remove PCI Id overlaping between megaraid_legacy and megaraid_{mbox,mm} Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid | 35 +++++++++++++++ drivers/scsi/megaraid/Kconfig.megaraid | 2 - drivers/scsi/megaraid/megaraid_mbox.c | 82 ++++------------------------------ drivers/scsi/megaraid/megaraid_mbox.h | 4 +- 4 files changed, 46 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid index 5331d91432c..09f6300eda4 100644 --- a/Documentation/scsi/ChangeLog.megaraid +++ b/Documentation/scsi/ChangeLog.megaraid @@ -1,3 +1,38 @@ +Release Date : Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju +Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module) +Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module) + +1. Sorted out PCI IDs to remove megaraid support overlaps. + Based on the patch from Daniel, sorted out PCI IDs along with + charactor node name change from 'megadev' to 'megadev_legacy' to avoid + conflict. + --- + Hopefully we'll be getting the build restriction zapped much sooner, + but we should also be thinking about totally removing the hardware + support overlap in the megaraid drivers. + + This patch pencils in a date of Feb 06 for this, and performs some + printk abuse in hope that existing legacy users might pick up on what's + going on. + + Signed-off-by: Daniel Drake + --- + +2. Fixed a issue: megaraid always fails to reset handler. + --- + I found that the megaraid driver always fails to reset the + adapter with the following message: + megaraid: resetting the host... + megaraid mbox: reset sequence completed successfully + megaraid: fast sync command timed out + megaraid: reservation reset failed + when the "Cluster mode" of the adapter BIOS is enabled. + So, whenever the reset occurs, the adapter goes to + offline and just become unavailable. + + Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp] + --- + Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module) Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module) diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid index 7363e12663a..17419e30ffc 100644 --- a/drivers/scsi/megaraid/Kconfig.megaraid +++ b/drivers/scsi/megaraid/Kconfig.megaraid @@ -64,7 +64,6 @@ config MEGARAID_MAILBOX To compile this driver as a module, choose M here: the module will be called megaraid_mbox -if MEGARAID_NEWGEN=n config MEGARAID_LEGACY tristate "LSI Logic Legacy MegaRAID Driver" depends on PCI && SCSI @@ -75,7 +74,6 @@ config MEGARAID_LEGACY To compile this driver as a module, choose M here: the module will be called megaraid -endif config MEGARAID_SAS tristate "LSI Logic MegaRAID SAS RAID Module" diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 4b5d420d2f4..d18a4bc2498 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -10,12 +10,13 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_mbox.c - * Version : v2.20.4.6 (Mar 07 2005) + * Version : v2.20.4.7 (Nov 14 2005) * * Authors: * Atul Mukker * Sreenivas Bagalkote * Manoj Jose + * Seokmann Ju * * List of supported controllers * @@ -136,7 +137,7 @@ static int wait_till_fw_empty(adapter_t *); -MODULE_AUTHOR("LSI Logic Corporation"); +MODULE_AUTHOR("sju@lsil.com"); MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(MEGARAID_VERSION); @@ -278,68 +279,14 @@ static struct pci_device_id pci_id_table_g[] = { { PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_VENDOR_ID_DELL, - PCI_SUBSYS_ID_PERC3_QC, - }, - { - PCI_VENDOR_ID_AMI, - PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_VENDOR_ID_DELL, - PCI_SUBSYS_ID_PERC3_DC, - }, - { - PCI_VENDOR_ID_AMI, - PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_VENDOR_ID_DELL, - PCI_SUBSYS_ID_PERC3_SC, - }, - { - PCI_VENDOR_ID_AMI, - PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_VENDOR_ID_AMI, - PCI_SUBSYS_ID_PERC3_SC, - }, - { - PCI_VENDOR_ID_AMI, - PCI_DEVICE_ID_AMI_MEGARAID3, - PCI_VENDOR_ID_AMI, - PCI_SUBSYS_ID_PERC3_DC, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_SCSI_320_0, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_SCSI_320_0, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_SCSI_320_1, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_SCSI_320_1, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_SCSI_320_2, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_SCSI_320_2, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_I4_133_RAID, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_I4_133_RAID, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_SATA_150_4, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_SATA_150_4, + PCI_ANY_ID, + PCI_ANY_ID, }, { PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_MEGARAID_SATA_150_6, - PCI_VENDOR_ID_LSI_LOGIC, - PCI_SUBSYS_ID_MEGARAID_SATA_150_6, + PCI_DEVICE_ID_AMI_MEGARAID3, + PCI_ANY_ID, + PCI_ANY_ID, }, { PCI_VENDOR_ID_LSI_LOGIC, @@ -347,18 +294,6 @@ static struct pci_device_id pci_id_table_g[] = { PCI_ANY_ID, PCI_ANY_ID, }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_INTEL_RAID_SRCS16, - PCI_VENDOR_ID_INTEL, - PCI_SUBSYS_ID_INTEL_RAID_SRCS16, - }, - { - PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK, - PCI_VENDOR_ID_INTEL, - PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK, - }, {0} /* Terminating entry */ }; MODULE_DEVICE_TABLE(pci, pci_id_table_g); @@ -2985,6 +2920,7 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[]) for (i = 0; i < 0xFFFFF; i++) { if (mbox->numstatus != 0xFF) break; + rmb(); } if (i == 0xFFFFF) { diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h index 644b91bdb02..882fb1a0b57 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.h +++ b/drivers/scsi/megaraid/megaraid_mbox.h @@ -21,8 +21,8 @@ #include "megaraid_ioctl.h" -#define MEGARAID_VERSION "2.20.4.6" -#define MEGARAID_EXT_VERSION "(Release Date: Mon Mar 07 12:27:22 EST 2005)" +#define MEGARAID_VERSION "2.20.4.7" +#define MEGARAID_EXT_VERSION "(Release Date: Mon Nov 14 12:27:22 EST 2005)" /* -- cgit v1.2.3-70-g09d2 From ce155ccecd4094e7b5e68058d26db691713240fc Mon Sep 17 00:00:00 2001 From: "brking@us.ibm.com" Date: Thu, 17 Nov 2005 09:35:12 -0600 Subject: [SCSI] ipr: Driver initialization fix for kexec/kdump When kexec booting a kernel when the previous kernel did not call ipr's shutdown method, the ipr adapter does not get properly initialized, which can result in the ipr adapter completing commands issued by the previous kernel. Fix ipr to detect this scenario by reading the adapter's interrupt mask register and the microprocessor interrupt register. If the interrupt mask register indicates that interrupts are enabled or the reset alert bit is set when the card is probed, this means the card is in an unknown state and we hard reset the card. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 17 ++++++++++++++++- drivers/scsi/ipr.h | 5 +++-- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index fa2cb3582cf..b6714da4d6e 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5887,7 +5887,12 @@ static int __devinit ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg) ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg); - _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa, IPR_SHUTDOWN_NONE); + if (ioa_cfg->needs_hard_reset) { + ioa_cfg->needs_hard_reset = 0; + ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); + } else + _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa, + IPR_SHUTDOWN_NONE); spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); @@ -6264,6 +6269,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, unsigned long ipr_regs_pci; void __iomem *ipr_regs; u32 rc = PCIBIOS_SUCCESSFUL; + volatile u32 mask, uproc; ENTER; @@ -6356,6 +6362,15 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev, goto cleanup_nomem; } + /* + * If HRRQ updated interrupt is not masked, or reset alert is set, + * the card is in an unknown state and needs a hard reset + */ + mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg); + uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg); + if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT)) + ioa_cfg->needs_hard_reset = 1; + ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); rc = request_irq(pdev->irq, ipr_isr, SA_SHIRQ, IPR_NAME, ioa_cfg); diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 6bec673c925..b639332131f 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -36,8 +36,8 @@ /* * Literals */ -#define IPR_DRIVER_VERSION "2.1.0" -#define IPR_DRIVER_DATE "(October 31, 2005)" +#define IPR_DRIVER_VERSION "2.1.1" +#define IPR_DRIVER_DATE "(November 15, 2005)" /* * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding @@ -922,6 +922,7 @@ struct ipr_ioa_cfg { u8 dump_taken:1; u8 allow_cmds:1; u8 allow_ml_add_del:1; + u8 needs_hard_reset:1; enum ipr_cache_state cache_state; u16 type; /* CCIN of the card */ -- cgit v1.2.3-70-g09d2 From 0ad78200baf1f85a21e6b26c225717ad80980d8f Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 28 Nov 2005 16:22:25 +0100 Subject: [SCSI] Mark some core scsi data structures const patch below marks a few scsi core datastructures as const, so that they end up in the .rodata section and don't cacheline share with things that get dirtied Signed-off-by: Arjan van de Ven Signed-off-by: James Bottomley --- drivers/scsi/ch.c | 4 ++-- drivers/scsi/constants.c | 16 ++++++++-------- drivers/scsi/raid_class.c | 2 +- drivers/scsi/scsi_scan.c | 2 +- drivers/scsi/scsi_sysfs.c | 4 ++-- drivers/scsi/scsi_transport_fc.c | 8 ++++---- drivers/scsi/sr.c | 2 +- drivers/scsi/st.c | 4 ++-- 8 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index ccbbae2bf47..0920220f331 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -75,7 +75,7 @@ static int vendor_counts[CH_TYPES-4]; module_param_array(vendor_firsts, int, NULL, 0444); module_param_array(vendor_counts, int, NULL, 0444); -static char *vendor_labels[CH_TYPES-4] = { +static const char * vendor_labels[CH_TYPES-4] = { "v0", "v1", "v2", "v3" }; // module_param_string_array(vendor_labels, NULL, 0444); @@ -140,7 +140,7 @@ static struct file_operations changer_fops = #endif }; -static struct { +static const struct { unsigned char sense; unsigned char asc; unsigned char ascq; diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 09bc81557b6..a972c1e89e3 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1065,7 +1065,7 @@ struct error_info2 { const char * fmt; }; -static struct error_info2 additional2[] = +static const struct error_info2 additional2[] = { {0x40,0x00,0x7f,"Ram failure (%x)"}, {0x40,0x80,0xff,"Diagnostic failure on component (%x)"}, @@ -1077,7 +1077,7 @@ static struct error_info2 additional2[] = }; /* description of the sense key values */ -static const char *snstext[] = { +static const char * const snstext[] = { "No Sense", /* 0: There is no sense information */ "Recovered Error", /* 1: The last command completed successfully but used error correction */ @@ -1279,7 +1279,7 @@ void scsi_print_req_sense(const char *devclass, struct scsi_request *sreq) EXPORT_SYMBOL(scsi_print_req_sense); #ifdef CONFIG_SCSI_CONSTANTS -static const char *one_byte_msgs[] = { +static const char * const one_byte_msgs[] = { /* 0x00 */ "Command Complete", NULL, "Save Pointers", /* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", /* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", @@ -1289,13 +1289,13 @@ static const char *one_byte_msgs[] = { }; #define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) -static const char *two_byte_msgs[] = { +static const char * const two_byte_msgs[] = { /* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" /* 0x23 */ "Ignore Wide Residue" }; #define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) -static const char *extended_msgs[] = { +static const char * const extended_msgs[] = { /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", /* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" }; @@ -1397,7 +1397,7 @@ EXPORT_SYMBOL(scsi_print_command); #ifdef CONFIG_SCSI_CONSTANTS -static const char * hostbyte_table[]={ +static const char * const hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"}; @@ -1422,12 +1422,12 @@ void scsi_print_hostbyte(int scsiresult) #ifdef CONFIG_SCSI_CONSTANTS -static const char * driverbyte_table[]={ +static const char * const driverbyte_table[]={ "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; #define NUM_DRIVERBYTE_STRS (sizeof(driverbyte_table) / sizeof(const char *)) -static const char * driversuggest_table[]={"SUGGEST_OK", +static const char * const driversuggest_table[]={"SUGGEST_OK", "SUGGEST_RETRY", "SUGGEST_ABORT", "SUGGEST_REMAP", "SUGGEST_DIE", "SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"}; #define NUM_SUGGEST_STRS (sizeof(driversuggest_table) / sizeof(const char *)) diff --git a/drivers/scsi/raid_class.c b/drivers/scsi/raid_class.c index 5b1c12041a4..5ec5f44602a 100644 --- a/drivers/scsi/raid_class.c +++ b/drivers/scsi/raid_class.c @@ -115,7 +115,7 @@ static DECLARE_TRANSPORT_CLASS(raid_class, raid_remove, NULL); -static struct { +static const struct { enum raid_state value; char *name; } raid_states[] = { diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 94e5167f260..950b087e4ca 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -74,7 +74,7 @@ #define SCSI_SCAN_TARGET_PRESENT 1 #define SCSI_SCAN_LUN_PRESENT 2 -static char *scsi_null_device_strs = "nullnullnullnull"; +static const char *scsi_null_device_strs = "nullnullnullnull"; #define MAX_SCSI_LUNS 512 diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 46349293de0..15842b1f0f4 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -21,7 +21,7 @@ #include "scsi_priv.h" #include "scsi_logging.h" -static struct { +static const struct { enum scsi_device_state value; char *name; } sdev_states[] = { @@ -48,7 +48,7 @@ const char *scsi_device_state_name(enum scsi_device_state state) return name; } -static struct { +static const struct { enum scsi_host_state value; char *name; } shost_states[] = { diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 6cd5931d9a5..cd95d2ae7b7 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -111,7 +111,7 @@ fc_enum_name_search(port_state, fc_port_state, fc_port_state_names) /* Convert fc_tgtid_binding_type values to ascii string name */ -static struct { +static const struct { enum fc_tgtid_binding_type value; char *name; int matchlen; @@ -149,7 +149,7 @@ get_fc_##title##_names(u32 table_key, char *buf) \ /* Convert FC_COS bit values to ascii string name */ -static struct { +static const struct { u32 value; char *name; } fc_cos_names[] = { @@ -163,7 +163,7 @@ fc_bitfield_name_search(cos, fc_cos_names) /* Convert FC_PORTSPEED bit values to ascii string name */ -static struct { +static const struct { u32 value; char *name; } fc_port_speed_names[] = { @@ -189,7 +189,7 @@ show_fc_fc4s (char *buf, u8 *fc4_list) /* Convert FC_RPORT_ROLE bit values to ascii string name */ -static struct { +static const struct { u32 value; char *name; } fc_remote_port_role_names[] = { diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index d68cea753bb..a3fa64cf665 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -730,7 +730,7 @@ static void get_capabilities(struct scsi_cd *cd) unsigned int the_result; int retries, rc, n; - static char *loadmech[] = + static const char *loadmech[] = { "caddy", "tray", diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 7ac6ea141ff..6d9078705c5 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -17,7 +17,7 @@ Last modified: 18-JAN-1998 Richard Gooch Devfs support */ -static char *verstr = "20050830"; +static const char *verstr = "20050830"; #include @@ -134,7 +134,7 @@ static struct st_dev_parm { #endif /* Bit reversed order to get same names for same minors with all mode counts */ -static char *st_formats[] = { +static const char *st_formats[] = { "", "r", "k", "s", "l", "t", "o", "u", "m", "v", "p", "x", "a", "y", "q", "z"}; -- cgit v1.2.3-70-g09d2 From 493ff4ee7f93a2b53ed60197e05aa145eec8f8f5 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 17 Nov 2005 11:13:43 -0700 Subject: [SCSI] Delete trailing full stop None of the other domain validation messages have a trailing full stop, so I don't see why this one should. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 38a53b5f9e9..4002a98ab16 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -1041,7 +1041,7 @@ void spi_display_xfer_agreement(struct scsi_target *starget) tp->hold_mcs ? " HMCS" : "", tmp, tp->offset); } else { - dev_info(&starget->dev, "%sasynchronous.\n", + dev_info(&starget->dev, "%sasynchronous\n", tp->width ? "wide " : ""); } } -- cgit v1.2.3-70-g09d2 From 26a68019c86e1d1782984a7a5babff762cde1501 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 29 Nov 2005 21:03:34 +0100 Subject: [SCSI] scsi_lib: stricter checks for clearing use_10_for_rw Check the asc and ascq for being "invalid command opcode" as well. Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ce9d73a292e..1f2782767ca 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -884,7 +884,8 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, * system where READ CAPACITY failed, we may have read * past the end of the disk. */ - if (cmd->device->use_10_for_rw && + if ((cmd->device->use_10_for_rw && + sshdr.asc == 0x20 && sshdr.ascq == 0x00) && (cmd->cmnd[0] == READ_10 || cmd->cmnd[0] == WRITE_10)) { cmd->device->use_10_for_rw = 0; -- cgit v1.2.3-70-g09d2 From 5433383ef33ed40c9c8a86a4355da344234af2a5 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 9 Nov 2005 15:49:04 -0800 Subject: [SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs. Transition driver to exclusively use the request_firmware() interfaces to retrieve firmware-blobs from user-space. This will be the default behaviour going forward until the embedded firmware-binary images are removed from the upstream kernel. Upon request, the driver caches the firmware image until the driver is unloaded. NOTE: The option is present to allow the user to continue to use the firmware-loader modules, but, should be considered deprecated. Signed-off-by: Andrew Vasquez Rejections fixed up and Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/Kconfig | 69 +++++++++------ drivers/scsi/qla2xxx/Makefile | 2 + drivers/scsi/qla2xxx/qla_attr.c | 2 +- drivers/scsi/qla2xxx/qla_def.h | 24 ++++- drivers/scsi/qla2xxx/qla_gbl.h | 4 +- drivers/scsi/qla2xxx/qla_init.c | 189 +++++++++++++++++++++++++++++----------- drivers/scsi/qla2xxx/qla_os.c | 156 +++++++++++++++++++++++++++++---- 7 files changed, 348 insertions(+), 98 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig index c1c1c687bcb..5205c4e7d6f 100644 --- a/drivers/scsi/qla2xxx/Kconfig +++ b/drivers/scsi/qla2xxx/Kconfig @@ -1,55 +1,70 @@ config SCSI_QLA2XXX - tristate - default (SCSI && PCI) - depends on SCSI && PCI + tristate "QLogic QLA2XXX Fibre Channel Support" + depends on PCI && SCSI + select SCSI_FC_ATTRS + select FW_LOADER + ---help--- + This qla2xxx driver supports all QLogic Fibre Channel + PCI and PCIe host adapters. -config SCSI_QLA21XX - tristate "QLogic ISP2100 host adapter family support" + By default, firmware for the ISP parts will be loaded + via the Firmware Loader interface. + + ISP Firmware Filename + ---------- ----------------- + 21xx ql2100_fw.bin + 22xx ql2200_fw.bin + 2300, 2312 ql2300_fw.bin + 2322 ql2322_fw.bin + 6312, 6322 ql6312_fw.bin + 24xx ql2400_fw.bin + + Upon request, the driver caches the firmware image until + the driver is unloaded. + + NOTE: The original method of building firmware-loader + modules has been deprecated as the firmware-images will + be removed from the kernel sources. + +config SCSI_QLA2XXX_EMBEDDED_FIRMWARE + bool " Use firmware-loader modules (DEPRECATED)" depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + +config SCSI_QLA21XX + tristate " Build QLogic ISP2100 firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 21xx (ISP2100) host adapter family. config SCSI_QLA22XX - tristate "QLogic ISP2200 host adapter family support" - depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + tristate " Build QLogic ISP2200 firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 22xx (ISP2200) host adapter family. config SCSI_QLA2300 - tristate "QLogic ISP2300 host adapter family support" - depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + tristate " Build QLogic ISP2300 firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 2300 (ISP2300 and ISP2312) host adapter family. config SCSI_QLA2322 - tristate "QLogic ISP2322 host adapter family support" - depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + tristate " Build QLogic ISP2322 firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 2322 (ISP2322) host adapter family. config SCSI_QLA6312 - tristate "QLogic ISP63xx host adapter family support" - depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + tristate " Build QLogic ISP63xx firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 63xx (ISP6312 and ISP6322) host adapter family. config SCSI_QLA24XX - tristate "QLogic ISP24xx host adapter family support" - depends on SCSI_QLA2XXX - select SCSI_FC_ATTRS - select FW_LOADER + tristate " Build QLogic ISP24xx firmware-module" + depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE ---help--- This driver supports the QLogic 24xx (ISP2422 and ISP2432) host adapter family. diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index b169687d08f..549dfe41020 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -3,6 +3,8 @@ EXTRA_CFLAGS += -DUNIQUE_FW_NAME qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ qla_dbg.o qla_sup.o qla_rscn.o qla_attr.o +obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx.o + qla2100-y := ql2100.o ql2100_fw.o qla2200-y := ql2200.o ql2200_fw.o qla2300-y := ql2300.o ql2300_fw.o diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 48e460eef05..2efca52dff5 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -232,7 +232,7 @@ static ssize_t qla2x00_isp_name_show(struct class_device *cdev, char *buf) { scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev)); - return snprintf(buf, PAGE_SIZE, "%s\n", ha->brd_info->isp_name); + return snprintf(buf, PAGE_SIZE, "ISP%04X\n", ha->pdev->device); } static ssize_t diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7096945ea23..ce0d88bbaa0 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -29,6 +30,7 @@ #include #include +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) #if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE) #define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100) #else @@ -79,9 +81,23 @@ #define IS_QLA2522(ha) 0 #endif +#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */ + +#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100) +#define IS_QLA2200(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2200) +#define IS_QLA2300(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2300) +#define IS_QLA2312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2312) +#define IS_QLA2322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322) +#define IS_QLA6312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6312) +#define IS_QLA6322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6322) +#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422) +#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432) +#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512) +#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522) +#endif + #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ IS_QLA6312(ha) || IS_QLA6322(ha)) - #define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha)) #define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha)) @@ -2124,6 +2140,12 @@ struct qla_board_info { struct scsi_host_template *sht; }; +struct fw_blob { + char *name; + uint32_t segs[4]; + const struct firmware *fw; +}; + /* Return data from MBC_GET_ID_LIST call. */ struct gid_list_info { uint8_t al_pa; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index fedcb0d3fc7..bec81adcf4f 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -33,8 +33,8 @@ extern int qla24xx_nvram_config(struct scsi_qla_host *); extern void qla2x00_update_fw_options(struct scsi_qla_host *); extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); +extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *); -extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *); extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t); @@ -76,6 +76,8 @@ extern void qla2x00_blink_led(scsi_qla_host_t *); extern int qla2x00_down_timeout(struct semaphore *, unsigned long); +extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); + /* * Global Function Prototypes in qla_iocb.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2d720121a0d..13e2aaf5676 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -8,7 +8,6 @@ #include #include -#include #include #include "qla_devtbl.h" @@ -3484,17 +3483,16 @@ qla24xx_nvram_config(scsi_qla_host_t *ha) return (rval); } +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) + int qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) { - int rval; - uint16_t cnt; - uint16_t *risc_code; - unsigned long risc_address; - unsigned long risc_code_size; - int num; - int i; - uint16_t *req_ring; + int rval, num, i; + uint32_t cnt; + uint16_t *risc_code; + uint32_t risc_addr, risc_size; + uint16_t *req_ring; struct qla_fw_info *fw_iter; rval = QLA_SUCCESS; @@ -3504,37 +3502,29 @@ qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) *srisc_addr = *ha->brd_info->fw_info->fwstart; while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) { risc_code = fw_iter->fwcode; - risc_code_size = *fw_iter->fwlen; - - if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { - risc_address = *fw_iter->fwstart; - } else { - /* Extended address */ - risc_address = *fw_iter->lfwstart; - } + risc_size = *fw_iter->fwlen; + if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) + risc_addr = *fw_iter->fwstart; + else + risc_addr = *fw_iter->lfwstart; num = 0; rval = 0; - while (risc_code_size > 0 && !rval) { + while (risc_size > 0 && !rval) { cnt = (uint16_t)(ha->fw_transfer_size >> 1); - if (cnt > risc_code_size) - cnt = risc_code_size; + if (cnt > risc_size) + cnt = risc_size; DEBUG7(printk("scsi(%ld): Loading risc segment@ " "addr %p, number of bytes 0x%x, offset 0x%lx.\n", - ha->host_no, risc_code, cnt, risc_address)); + ha->host_no, risc_code, cnt, risc_addr)); req_ring = (uint16_t *)ha->request_ring; for (i = 0; i < cnt; i++) req_ring[i] = cpu_to_le16(risc_code[i]); - if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) { - rval = qla2x00_load_ram(ha, ha->request_dma, - risc_address, cnt); - } else { - rval = qla2x00_load_ram_ext(ha, - ha->request_dma, risc_address, cnt); - } + rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr, + cnt); if (rval) { DEBUG(printk("scsi(%ld): [ERROR] Failed to " "load segment %d of firmware\n", @@ -3548,16 +3538,15 @@ qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) } risc_code += cnt; - risc_address += cnt; - risc_code_size -= cnt; + risc_addr += cnt; + risc_size -= cnt; num++; } /* Next firmware sequence */ fw_iter++; } - - return (rval); + return rval; } int @@ -3642,8 +3631,108 @@ qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr) return rval; } +#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */ + int -qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) +qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) +{ + int rval; + int i, fragment; + uint16_t *wcode, *fwcode; + uint32_t risc_addr, risc_size, fwclen, wlen, *seg; + struct fw_blob *blob; + + /* Load firmware blob. */ + blob = qla2x00_request_firmware(ha); + if (!blob) { + qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n"); + return QLA_FUNCTION_FAILED; + } + + rval = QLA_SUCCESS; + + wcode = (uint16_t *)ha->request_ring; + *srisc_addr = 0; + fwcode = (uint16_t *)blob->fw->data; + fwclen = 0; + + /* Validate firmware image by checking version. */ + if (blob->fw->size < 8 * sizeof(uint16_t)) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of firmware image (%Zd)!\n", + blob->fw->size); + goto fail_fw_integrity; + } + for (i = 0; i < 4; i++) + wcode[i] = be16_to_cpu(fwcode[i + 4]); + if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff && + wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 && + wcode[2] == 0 && wcode[3] == 0)) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of firmware image!\n"); + qla_printk(KERN_WARNING, ha, + "Firmware data: %04x %04x %04x %04x!\n", wcode[0], + wcode[1], wcode[2], wcode[3]); + goto fail_fw_integrity; + } + + seg = blob->segs; + while (*seg && rval == QLA_SUCCESS) { + risc_addr = *seg; + *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr; + risc_size = be16_to_cpu(fwcode[3]); + + /* Validate firmware image size. */ + fwclen += risc_size * sizeof(uint16_t); + if (blob->fw->size < fwclen) { + qla_printk(KERN_WARNING, ha, + "Unable to verify integrity of firmware image " + "(%Zd)!\n", blob->fw->size); + goto fail_fw_integrity; + } + + fragment = 0; + while (risc_size > 0 && rval == QLA_SUCCESS) { + wlen = (uint16_t)(ha->fw_transfer_size >> 1); + if (wlen > risc_size) + wlen = risc_size; + + DEBUG7(printk("scsi(%ld): Loading risc segment@ risc " + "addr %x, number of words 0x%x.\n", ha->host_no, + risc_addr, wlen)); + + for (i = 0; i < wlen; i++) + wcode[i] = swab16(fwcode[i]); + + rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr, + wlen); + if (rval) { + DEBUG(printk("scsi(%ld):[ERROR] Failed to load " + "segment %d of firmware\n", ha->host_no, + fragment)); + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to load segment %d of " + "firmware\n", fragment); + break; + } + + fwcode += wlen; + risc_addr += wlen; + risc_size -= wlen; + fragment++; + } + + /* Next segment. */ + seg++; + } + return rval; + +fail_fw_integrity: + return QLA_FUNCTION_FAILED; +} + +int +qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -3651,14 +3740,13 @@ qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) uint32_t risc_addr; uint32_t risc_size; uint32_t i; - const struct firmware *fw_entry; + struct fw_blob *blob; uint32_t *fwcode, fwclen; - if (request_firmware(&fw_entry, ha->brd_info->fw_fname, - &ha->pdev->dev)) { - qla_printk(KERN_ERR, ha, - "Firmware image file not available: '%s'\n", - ha->brd_info->fw_fname); + /* Load firmware blob. */ + blob = qla2x00_request_firmware(ha); + if (!blob) { + qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n"); return QLA_FUNCTION_FAILED; } @@ -3667,14 +3755,14 @@ qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) segments = FA_RISC_CODE_SEGMENTS; dcode = (uint32_t *)ha->request_ring; *srisc_addr = 0; - fwcode = (uint32_t *)fw_entry->data; + fwcode = (uint32_t *)blob->fw->data; fwclen = 0; /* Validate firmware image by checking version. */ - if (fw_entry->size < 8 * sizeof(uint32_t)) { + if (blob->fw->size < 8 * sizeof(uint32_t)) { qla_printk(KERN_WARNING, ha, - "Unable to verify integrity of flash firmware image " - "(%Zd)!\n", fw_entry->size); + "Unable to verify integrity of firmware image (%Zd)!\n", + blob->fw->size); goto fail_fw_integrity; } for (i = 0; i < 4; i++) @@ -3684,7 +3772,7 @@ qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 && dcode[3] == 0)) { qla_printk(KERN_WARNING, ha, - "Unable to verify integrity of flash firmware image!\n"); + "Unable to verify integrity of firmware image!\n"); qla_printk(KERN_WARNING, ha, "Firmware data: %08x %08x %08x %08x!\n", dcode[0], dcode[1], dcode[2], dcode[3]); @@ -3698,10 +3786,11 @@ qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) /* Validate firmware image size. */ fwclen += risc_size * sizeof(uint32_t); - if (fw_entry->size < fwclen) { + if (blob->fw->size < fwclen) { qla_printk(KERN_WARNING, ha, - "Unable to verify integrity of flash firmware " - "image (%Zd)!\n", fw_entry->size); + "Unable to verify integrity of firmware image " + "(%Zd)!\n", blob->fw->size); + goto fail_fw_integrity; } @@ -3739,13 +3828,9 @@ qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr) /* Next segment. */ segments--; } - - release_firmware(fw_entry); return rval; fail_fw_integrity: - - release_firmware(fw_entry); return QLA_FUNCTION_FAILED; - } +#endif diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index c58c9d97b04..47db029b2fc 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -54,11 +54,6 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); -int ql2xfwloadbin=1; -module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR); -MODULE_PARM_DESC(ql2xfwloadbin, - "Load ISP2xxx firmware image via hotplug."); - static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); @@ -1261,12 +1256,16 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) char pci_info[20]; char fw_str[30]; fc_port_t *fcport; + struct scsi_host_template *sht; if (pci_enable_device(pdev)) goto probe_out; - host = scsi_host_alloc(brd_info->sht ? brd_info->sht: - &qla2x00_driver_template, sizeof(scsi_qla_host_t)); + sht = &qla2x00_driver_template; + if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432) + sht = &qla24xx_driver_template; + host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t)); if (host == NULL) { printk(KERN_WARNING "qla2xxx: Couldn't allocate host from scsi layer!\n"); @@ -1291,8 +1290,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) goto probe_failed; qla_printk(KERN_INFO, ha, - "Found an %s, irq %d, iobase 0x%p\n", ha->brd_info->isp_name, - pdev->irq, ha->iobase); + "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq, + ha->iobase); spin_lock_init(&ha->hardware_lock); @@ -1368,9 +1367,11 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.reset_adapter = qla24xx_reset_adapter; ha->isp_ops.nvram_config = qla24xx_nvram_config; ha->isp_ops.update_fw_options = qla24xx_update_fw_options; +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) ha->isp_ops.load_risc = qla24xx_load_risc_flash; - if (ql2xfwloadbin) - ha->isp_ops.load_risc = qla24xx_load_risc_hotplug; +#else + ha->isp_ops.load_risc = qla24xx_load_risc; +#endif ha->isp_ops.pci_info_str = qla24xx_pci_info_str; ha->isp_ops.fw_version_str = qla24xx_fw_version_str; ha->isp_ops.intr_handler = qla24xx_intr_handler; @@ -1531,11 +1532,12 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) qla_printk(KERN_INFO, ha, "\n" " QLogic Fibre Channel HBA Driver: %s\n" " QLogic %s - %s\n" - " %s: %s @ %s hdma%c, host#=%ld, fw=%s\n", qla2x00_version_str, - ha->model_number, ha->model_desc ? ha->model_desc: "", - ha->brd_info->isp_name, ha->isp_ops.pci_info_str(ha, pci_info), - pci_name(pdev), ha->flags.enable_64bit_addressing ? '+': '-', - ha->host_no, ha->isp_ops.fw_version_str(ha, fw_str)); + " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n", + qla2x00_version_str, ha->model_number, + ha->model_desc ? ha->model_desc: "", pdev->device, + ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev), + ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no, + ha->isp_ops.fw_version_str(ha, fw_str)); /* Go with fc_rport registration. */ list_for_each_entry(fcport, &ha->fcports, list) @@ -2483,6 +2485,10 @@ qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) return -ETIMEDOUT; } +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) + +#define qla2x00_release_firmware() do { } while (0) + static struct qla_board_info qla_board_tbl[] = { { .drv_name = "qla2400", @@ -2530,8 +2536,122 @@ qla2xxx_remove_one(struct pci_dev *pdev) qla2x00_remove_one(pdev); } +#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */ + +/* Firmware interface routines. */ + +#define FW_BLOBS 6 +#define FW_ISP21XX 0 +#define FW_ISP22XX 1 +#define FW_ISP2300 2 +#define FW_ISP2322 3 +#define FW_ISP63XX 4 +#define FW_ISP24XX 5 + +static DECLARE_MUTEX(qla_fw_lock); + +static struct fw_blob qla_fw_blobs[FW_BLOBS] = { + { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, }, + { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, }, + { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, }, + { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, }, + { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, }, + { .name = "ql2400_fw.bin", }, +}; + +struct fw_blob * +qla2x00_request_firmware(scsi_qla_host_t *ha) +{ + struct fw_blob *blob; + + blob = NULL; + if (IS_QLA2100(ha)) { + blob = &qla_fw_blobs[FW_ISP21XX]; + } else if (IS_QLA2200(ha)) { + blob = &qla_fw_blobs[FW_ISP22XX]; + } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) { + blob = &qla_fw_blobs[FW_ISP2300]; + } else if (IS_QLA2322(ha)) { + blob = &qla_fw_blobs[FW_ISP2322]; + } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) { + blob = &qla_fw_blobs[FW_ISP63XX]; + } else if (IS_QLA24XX(ha)) { + blob = &qla_fw_blobs[FW_ISP24XX]; + } + + down(&qla_fw_lock); + if (blob->fw) + goto out; + + if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) { + DEBUG2(printk("scsi(%ld): Failed to load firmware image " + "(%s).\n", ha->host_no, blob->name)); + blob->fw = NULL; + blob = NULL; + goto out; + } + +out: + up(&qla_fw_lock); + return blob; +} + +static void +qla2x00_release_firmware(void) +{ + int idx; + + down(&qla_fw_lock); + for (idx = 0; idx < FW_BLOBS; idx++) + if (qla_fw_blobs[idx].fw) + release_firmware(qla_fw_blobs[idx].fw); + up(&qla_fw_lock); +} + +static struct qla_board_info qla_board_tbl = { + .drv_name = "qla2xxx", +}; + +static struct pci_device_id qla2xxx_pci_tbl[] = { + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422, + PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432, + PCI_ANY_ID, PCI_ANY_ID, }, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); + +static int __devinit +qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + return qla2x00_probe_one(pdev, &qla_board_tbl); +} + +static void __devexit +qla2xxx_remove_one(struct pci_dev *pdev) +{ + qla2x00_remove_one(pdev); +} + +#endif + static struct pci_driver qla2xxx_pci_driver = { .name = "qla2xxx", + .owner = THIS_MODULE, .id_table = qla2xxx_pci_tbl, .probe = qla2xxx_probe_one, .remove = __devexit_p(qla2xxx_remove_one), @@ -2556,6 +2676,9 @@ qla2x00_module_init(void) /* Derive version string. */ strcpy(qla2x00_version_str, QLA2XXX_VERSION); +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) + strcat(qla2x00_version_str, "-fw"); +#endif #if DEBUG_QLA2100 strcat(qla2x00_version_str, "-debug"); #endif @@ -2580,6 +2703,7 @@ static void __exit qla2x00_module_exit(void) { pci_unregister_driver(&qla2xxx_pci_driver); + qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); } -- cgit v1.2.3-70-g09d2 From 331e34768657ead5a5b169337351e045305cafcb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 9 Nov 2005 15:49:19 -0800 Subject: [SCSI] qla2xxx: Add support for embedded ISP24xx firmware. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/Makefile | 3 +- drivers/scsi/qla2xxx/ql2400.c | 111 ++++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_init.c | 61 ++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_os.c | 82 ++++++++++------------------- 4 files changed, 202 insertions(+), 55 deletions(-) create mode 100644 drivers/scsi/qla2xxx/ql2400.c (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index 549dfe41020..40c0de12588 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -10,10 +10,11 @@ qla2200-y := ql2200.o ql2200_fw.o qla2300-y := ql2300.o ql2300_fw.o qla2322-y := ql2322.o ql2322_fw.o qla6312-y := ql6312.o ql6312_fw.o +qla2400-y := ql2400.o ql2400_fw.o obj-$(CONFIG_SCSI_QLA21XX) += qla2xxx.o qla2100.o obj-$(CONFIG_SCSI_QLA22XX) += qla2xxx.o qla2200.o obj-$(CONFIG_SCSI_QLA2300) += qla2xxx.o qla2300.o obj-$(CONFIG_SCSI_QLA2322) += qla2xxx.o qla2322.o obj-$(CONFIG_SCSI_QLA6312) += qla2xxx.o qla6312.o -obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o +obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o qla2400.o diff --git a/drivers/scsi/qla2xxx/ql2400.c b/drivers/scsi/qla2xxx/ql2400.c new file mode 100644 index 00000000000..6c7165f47e2 --- /dev/null +++ b/drivers/scsi/qla2xxx/ql2400.c @@ -0,0 +1,111 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2005 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#include +#include +#include + +#include "qla_def.h" + +static char qla_driver_name[] = "qla2400"; + +extern uint32_t fw2400_version_str[]; +extern uint32_t fw2400_addr01; +extern uint32_t fw2400_code01[]; +extern uint32_t fw2400_length01; +extern uint32_t fw2400_addr02; +extern uint32_t fw2400_code02[]; +extern uint32_t fw2400_length02; + +static struct qla_fw_info qla_fw_tbl[] = { + { + .addressing = FW_INFO_ADDR_EXTENDED, + .fwcode = (unsigned short *)&fw2400_code01[0], + .fwlen = (unsigned short *)&fw2400_length01, + .lfwstart = (unsigned long *)&fw2400_addr01, + }, + { + .addressing = FW_INFO_ADDR_EXTENDED, + .fwcode = (unsigned short *)&fw2400_code02[0], + .fwlen = (unsigned short *)&fw2400_length02, + .lfwstart = (unsigned long *)&fw2400_addr02, + }, + { FW_INFO_ADDR_NOMORE, }, +}; + +static struct qla_board_info qla_board_tbl[] = { + { + .drv_name = qla_driver_name, + .isp_name = "ISP2422", + .fw_info = qla_fw_tbl, + .fw_fname = "ql2400_fw.bin", + }, + { + .drv_name = qla_driver_name, + .isp_name = "ISP2432", + .fw_info = qla_fw_tbl, + .fw_fname = "ql2400_fw.bin", + }, +}; + +static struct pci_device_id qla24xx_pci_tbl[] = { + { + .vendor = PCI_VENDOR_ID_QLOGIC, + .device = PCI_DEVICE_ID_QLOGIC_ISP2422, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (unsigned long)&qla_board_tbl[0], + }, + { + .vendor = PCI_VENDOR_ID_QLOGIC, + .device = PCI_DEVICE_ID_QLOGIC_ISP2432, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (unsigned long)&qla_board_tbl[1], + }, + {0, 0}, +}; +MODULE_DEVICE_TABLE(pci, qla24xx_pci_tbl); + +static int __devinit +qla24xx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + return qla2x00_probe_one(pdev, + (struct qla_board_info *)id->driver_data); +} + +static void __devexit +qla24xx_remove_one(struct pci_dev *pdev) +{ + qla2x00_remove_one(pdev); +} + +static struct pci_driver qla24xx_pci_driver = { + .name = "qla2400", + .id_table = qla24xx_pci_tbl, + .probe = qla24xx_probe_one, + .remove = __devexit_p(qla24xx_remove_one), +}; + +static int __init +qla24xx_init(void) +{ + return pci_module_init(&qla24xx_pci_driver); +} + +static void __exit +qla24xx_exit(void) +{ + pci_unregister_driver(&qla24xx_pci_driver); +} + +module_init(qla24xx_init); +module_exit(qla24xx_exit); + +MODULE_AUTHOR("QLogic Corporation"); +MODULE_DESCRIPTION("QLogic ISP24xx FC-SCSI Host Bus Adapter driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(QLA2XXX_VERSION); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 13e2aaf5676..dadc91bd0ea 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3549,6 +3549,67 @@ qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) return rval; } +int +qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr) +{ + int rval, num, i; + uint32_t cnt; + uint32_t *risc_code; + uint32_t risc_addr, risc_size; + uint32_t *req_ring; + struct qla_fw_info *fw_iter; + + rval = QLA_SUCCESS; + + /* Load firmware sequences */ + fw_iter = ha->brd_info->fw_info; + *srisc_addr = *((uint32_t *)fw_iter->lfwstart); + while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) { + risc_code = (uint32_t *)fw_iter->fwcode; + risc_size = *((uint32_t *)fw_iter->fwlen); + risc_addr = *((uint32_t *)fw_iter->lfwstart); + + num = 0; + rval = 0; + while (risc_size > 0 && !rval) { + cnt = (uint32_t)(ha->fw_transfer_size >> 2); + if (cnt > risc_size) + cnt = risc_size; + + DEBUG7(printk("scsi(%ld): Loading risc segment@ " + "addr %p, number of bytes 0x%x, offset 0x%lx.\n", + ha->host_no, risc_code, cnt, risc_addr)); + + req_ring = (uint32_t *)ha->request_ring; + for (i = 0; i < cnt; i++) + req_ring[i] = cpu_to_le32(risc_code[i]); + + rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr, + cnt); + if (rval) { + DEBUG(printk("scsi(%ld): [ERROR] Failed to " + "load segment %d of firmware\n", + ha->host_no, num)); + qla_printk(KERN_WARNING, ha, + "[ERROR] Failed to load segment %d of " + "firmware\n", num); + + qla2x00_dump_regs(ha); + break; + } + + risc_code += cnt; + risc_addr += cnt; + risc_size -= cnt; + num++; + } + + /* Next firmware sequence */ + fw_iter++; + } + return rval; +} + int qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 47db029b2fc..41d2aeee096 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -54,6 +54,13 @@ module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xloginretrycount, "Specify an alternate value for the NVRAM login retry count."); +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) +int ql2xfwloadflash; +module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR); +MODULE_PARM_DESC(ql2xfwloadflash, + "Load ISP24xx firmware image from FLASH (onboard memory)."); +#endif + static void qla2x00_free_device(scsi_qla_host_t *); static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); @@ -1367,10 +1374,10 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->isp_ops.reset_adapter = qla24xx_reset_adapter; ha->isp_ops.nvram_config = qla24xx_nvram_config; ha->isp_ops.update_fw_options = qla24xx_update_fw_options; -#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) - ha->isp_ops.load_risc = qla24xx_load_risc_flash; -#else ha->isp_ops.load_risc = qla24xx_load_risc; +#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) + if (ql2xfwloadflash) + ha->isp_ops.load_risc = qla24xx_load_risc_flash; #endif ha->isp_ops.pci_info_str = qla24xx_pci_info_str; ha->isp_ops.fw_version_str = qla24xx_fw_version_str; @@ -2488,53 +2495,8 @@ qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) #define qla2x00_release_firmware() do { } while (0) - -static struct qla_board_info qla_board_tbl[] = { - { - .drv_name = "qla2400", - .isp_name = "ISP2422", - .fw_fname = "ql2400_fw.bin", - .sht = &qla24xx_driver_template, - }, - { - .drv_name = "qla2400", - .isp_name = "ISP2432", - .fw_fname = "ql2400_fw.bin", - .sht = &qla24xx_driver_template, - }, -}; - -static struct pci_device_id qla2xxx_pci_tbl[] = { - { - .vendor = PCI_VENDOR_ID_QLOGIC, - .device = PCI_DEVICE_ID_QLOGIC_ISP2422, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long)&qla_board_tbl[0], - }, - { - .vendor = PCI_VENDOR_ID_QLOGIC, - .device = PCI_DEVICE_ID_QLOGIC_ISP2432, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long)&qla_board_tbl[1], - }, - {0, 0}, -}; -MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl); - -static int __devinit -qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) -{ - return qla2x00_probe_one(pdev, - (struct qla_board_info *)id->driver_data); -} - -static void __devexit -qla2xxx_remove_one(struct pci_dev *pdev) -{ - qla2x00_remove_one(pdev); -} +#define qla2x00_pci_module_init() (0) +#define qla2x00_pci_module_exit() do { } while (0) #else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */ @@ -2647,8 +2609,6 @@ qla2xxx_remove_one(struct pci_dev *pdev) qla2x00_remove_one(pdev); } -#endif - static struct pci_driver qla2xxx_pci_driver = { .name = "qla2xxx", .owner = THIS_MODULE, @@ -2657,6 +2617,20 @@ static struct pci_driver qla2xxx_pci_driver = { .remove = __devexit_p(qla2xxx_remove_one), }; +static inline int +qla2x00_pci_module_init(void) +{ + return pci_module_init(&qla2xxx_pci_driver); +} + +static inline void +qla2x00_pci_module_exit(void) +{ + pci_unregister_driver(&qla2xxx_pci_driver); +} + +#endif + /** * qla2x00_module_init - Module initialization. **/ @@ -2688,7 +2662,7 @@ qla2x00_module_init(void) return -ENODEV; printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); - ret = pci_module_init(&qla2xxx_pci_driver); + ret = qla2x00_pci_module_init(); if (ret) { kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); @@ -2702,7 +2676,7 @@ qla2x00_module_init(void) static void __exit qla2x00_module_exit(void) { - pci_unregister_driver(&qla2xxx_pci_driver); + qla2x00_pci_module_exit(); qla2x00_release_firmware(); kmem_cache_destroy(srb_cachep); fc_release_transport(qla2xxx_transport_template); -- cgit v1.2.3-70-g09d2 From c6ce15d7cdb3f6cb3ff442ac01eb6c5f0fe321af Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 9 Nov 2005 15:49:33 -0800 Subject: [SCSI] qla2xxx: Resync with latest released ISP24xx firmware -- 4.00.16. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/ql2400_fw.c | 12376 +++++++++++++++++++++++++++++++++++++ 1 file changed, 12376 insertions(+) create mode 100644 drivers/scsi/qla2xxx/ql2400_fw.c (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/ql2400_fw.c b/drivers/scsi/qla2xxx/ql2400_fw.c new file mode 100644 index 00000000000..5977795854f --- /dev/null +++ b/drivers/scsi/qla2xxx/ql2400_fw.c @@ -0,0 +1,12376 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2005 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#include + +/* + * Firmware Version 4.00.16 (08:09 Oct 26, 2005) + */ + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_version = 4*1024+0; +#else +uint32_t risc_code_version = 4*1024+0; +#endif + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_version_str[] = {4, 0,16}; +#else +uint32_t firmware_version[] = {4, 0,16}; +#endif + +#ifdef UNIQUE_FW_NAME +#define fw2400_VERSION_STRING "4.00.16" +#else +#define FW_VERSION_STRING "4.00.16" +#endif + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_addr01 = 0x00100000 ; +#else +uint32_t risc_code_addr01 = 0x00100000 ; +#endif + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_code01[] = { +#else +uint32_t risc_code01[] = { +#endif + 0x0401f17c, 0x0010e000, 0x00100000, 0x0000ab4a, + 0x00000004, 0x00000000, 0x00000010, 0x00000002, + 0x00000003, 0x00000000, 0x20434f50, 0x59524947, + 0x48542032, 0x30303520, 0x514c4f47, 0x49432043, + 0x4f52504f, 0x52415449, 0x4f4e2020, 0x20495350, + 0x32347878, 0x20466972, 0x6d776172, 0x65202020, + 0x56657273, 0x696f6e20, 0x342e302e, 0x31362020, + 0x20202024, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x42001800, 0x0010014f, 0x42002000, 0x0010b8fe, + 0x500c0800, 0x800c1800, 0x500c1000, 0x800c1800, + 0x54042000, 0x80102000, 0x80040800, 0x80081040, + 0x040207fc, 0x500c0800, 0x800409c0, 0x040207f6, + 0x44002000, 0x80102000, 0x40100000, 0x44040000, + 0x80000000, 0x44080000, 0x80000000, 0x440c0000, + 0x80000000, 0x44100000, 0x80000000, 0x44140000, + 0x80000000, 0x44180000, 0x80000000, 0x441c0000, + 0x80000000, 0x44200000, 0x80000000, 0x44240000, + 0x80000000, 0x44280000, 0x80000000, 0x442c0000, + 0x80000000, 0x44300000, 0x80000000, 0x44340000, + 0x80000000, 0x44380000, 0x80000000, 0x443c0000, + 0x80000000, 0x44400000, 0x80000000, 0x44440000, + 0x80000000, 0x44480000, 0x80000000, 0x444c0000, + 0x80000000, 0x44500000, 0x80000000, 0x44540000, + 0x80000000, 0x44580000, 0x80000000, 0x445c0000, + 0x80000000, 0x44600000, 0x80000000, 0x44640000, + 0x80000000, 0x44680000, 0x80000000, 0x446c0000, + 0x80000000, 0x44700000, 0x80000000, 0x44740000, + 0x80000000, 0x44780000, 0x80000000, 0x447c0000, + 0x80000000, 0x44800000, 0x80000000, 0x44840000, + 0x80000000, 0x44880000, 0x80000000, 0x448c0000, + 0x80000000, 0x44900000, 0x80000000, 0x44940000, + 0x80000000, 0x44980000, 0x80000000, 0x449c0000, + 0x80000000, 0x44a00000, 0x80000000, 0x44a40000, + 0x80000000, 0x44a80000, 0x80000000, 0x44ac0000, + 0x80000000, 0x44b00000, 0x80000000, 0x44b40000, + 0x80000000, 0x44b80000, 0x80000000, 0x44bc0000, + 0x80000000, 0x44c00000, 0x80000000, 0x44c40000, + 0x80000000, 0x44c80000, 0x80000000, 0x44cc0000, + 0x80000000, 0x44d00000, 0x80000000, 0x44d80000, + 0x80000000, 0x44d40000, 0x80000000, 0x44dc0000, + 0x80000000, 0x44e00000, 0x80000000, 0x44e40000, + 0x80000000, 0x44e80000, 0x80000000, 0x44ec0000, + 0x80000000, 0x44f00000, 0x80000000, 0x44f40000, + 0x80000000, 0x44f80000, 0x80000000, 0x44fc0000, + 0x80000000, 0x45000000, 0x80000000, 0x45040000, + 0x80000000, 0x45080000, 0x80000000, 0x450c0000, + 0x80000000, 0x45100000, 0x80000000, 0x45140000, + 0x80000000, 0x45180000, 0x80000000, 0x451c0000, + 0x80000000, 0x45200000, 0x80000000, 0x45240000, + 0x80000000, 0x45280000, 0x80000000, 0x452c0000, + 0x80000000, 0x45300000, 0x80000000, 0x45340000, + 0x80000000, 0x45380000, 0x80000000, 0x453c0000, + 0x80000000, 0x45400000, 0x80000000, 0x45440000, + 0x80000000, 0x45480000, 0x80000000, 0x454c0000, + 0x80000000, 0x45500000, 0x80000000, 0x45540000, + 0x80000000, 0x45580000, 0x80000000, 0x455c0000, + 0x80000000, 0x45600000, 0x80000000, 0x45640000, + 0x80000000, 0x45680000, 0x80000000, 0x456c0000, + 0x80000000, 0x45700000, 0x80000000, 0x45740000, + 0x80000000, 0x45780000, 0x80000000, 0x457c0000, + 0x80000000, 0x45800000, 0x80000000, 0x45840000, + 0x80000000, 0x45880000, 0x80000000, 0x458c0000, + 0x80000000, 0x45900000, 0x80000000, 0x45940000, + 0x80000000, 0x45980000, 0x80000000, 0x459c0000, + 0x80000000, 0x45a00000, 0x80000000, 0x45a40000, + 0x80000000, 0x45a80000, 0x80000000, 0x45ac0000, + 0x80000000, 0x45b00000, 0x80000000, 0x45b40000, + 0x80000000, 0x45b80000, 0x80000000, 0x45bc0000, + 0x80000000, 0x45c00000, 0x80000000, 0x45c40000, + 0x80000000, 0x45c80000, 0x80000000, 0x45cc0000, + 0x80000000, 0x45d00000, 0x80000000, 0x45d40000, + 0x80000000, 0x45d80000, 0x80000000, 0x45dc0000, + 0x80000000, 0x45e00000, 0x80000000, 0x45e40000, + 0x80000000, 0x45e80000, 0x80000000, 0x45ec0000, + 0x80000000, 0x45f00000, 0x80000000, 0x45f40000, + 0x80000000, 0x45f80000, 0x80000000, 0x45fc0000, + 0x4a03c020, 0x00004000, 0x4a03c011, 0x40000010, + 0x04006000, 0x4203e000, 0x40000000, 0x59e00017, + 0x8c000508, 0x04000003, 0x4a03c017, 0x00000000, + 0x4203e000, 0x30000001, 0x0401f000, 0x0000bf00, + 0x00000080, 0x0000bfe0, 0x00000020, 0x0000ff00, + 0x00000080, 0x0000ffd0, 0x00000030, 0x00007100, + 0x00000010, 0x00007200, 0x00000008, 0x00007209, + 0x00000007, 0x00007300, 0x00000008, 0x00007309, + 0x00000007, 0x00007400, 0x00000008, 0x00007409, + 0x00000007, 0x00007600, 0x000000b0, 0x00007700, + 0x00000040, 0x00003000, 0x00000070, 0x00004000, + 0x000000c0, 0x00006000, 0x00000050, 0x00006100, + 0x00000010, 0x00006130, 0x00000010, 0x00006150, + 0x00000010, 0x00006170, 0x00000010, 0x00006190, + 0x00000010, 0x000061b0, 0x00000010, 0x00000000, + 0x42000000, 0x00000100, 0x4202f000, 0x00000000, + 0x42000800, 0x00021f00, 0x45780800, 0x80040800, + 0x80000040, 0x040207fd, 0x4203f000, 0x00021fff, + 0x40000000, 0x4203e000, 0x90000100, 0x40000000, + 0x0201f800, 0x001006fd, 0x42000000, 0x00001000, + 0x50000000, 0x82000480, 0x24320002, 0x04020015, + 0x42000800, 0x00000064, 0x80040840, 0x04000007, + 0x4a030000, 0x00000001, 0x40000000, 0x59800000, + 0x8c000500, 0x040007f9, 0x04000008, 0x42000800, + 0x00007a17, 0x50040000, 0x8c00050e, 0x04020003, + 0x8400054e, 0x44000800, 0x4a030000, 0x00000000, + 0x4a03c020, 0x00000004, 0x4203e000, 0x6000000f, + 0x59e00023, 0x8c000500, 0x04020039, 0x42000000, + 0x00100001, 0x50000800, 0x82040c00, 0x00000004, + 0x58042003, 0x42001000, 0xffffffff, 0x0201f800, + 0x001006f4, 0x0402004e, 0x58042003, 0x42001000, + 0xffffffff, 0x0201f800, 0x001006f4, 0x04020048, + 0x58042003, 0x42001000, 0x00ffffff, 0x0201f800, + 0x001006f4, 0x04020042, 0x58042003, 0x42001000, + 0x00ffffff, 0x0201f800, 0x001006f4, 0x0402003c, + 0x42000000, 0x00100001, 0x5000a000, 0x8250a400, + 0x00000004, 0x4200a800, 0x00020000, 0x5850b003, + 0x0201f800, 0x0010ab17, 0x8250a400, 0x00000005, + 0x4a0370e8, 0x00000003, 0x4200a800, 0x0000c000, + 0x5850b003, 0x0201f800, 0x0010ab17, 0x4a0378e8, + 0x00000003, 0x4200a800, 0x00008000, 0x5850b003, + 0x0201f800, 0x0010ab17, 0x0401f02b, 0x42000800, + 0x00020000, 0x58042003, 0x42001000, 0xffffffff, + 0x0201f800, 0x001006f4, 0x04020019, 0x4a0370e8, + 0x00000003, 0x42000800, 0x0000c000, 0x58042003, + 0x82102500, 0x00ffffff, 0x42001000, 0x00ffffff, + 0x0201f800, 0x001006f4, 0x0402000d, 0x4a0378e8, + 0x00000003, 0x42000800, 0x00008000, 0x58042003, + 0x82102500, 0x00ffffff, 0x42001000, 0x00ffffff, + 0x0201f800, 0x001006f4, 0x0400000b, 0x4a03c020, + 0x00004010, 0x4a03c011, 0x40100011, 0x04006000, + 0x4203e000, 0x40000000, 0x4203e000, 0x30000001, + 0x0401f000, 0x0201f800, 0x00100791, 0x42001000, + 0x0010ab4a, 0x40080000, 0x80140480, 0x82001d00, + 0xffffff00, 0x04020003, 0x40001800, 0x0401f003, + 0x42001800, 0x000000ff, 0x480bc840, 0x480fc842, + 0x04011000, 0x400c0000, 0x80081400, 0x40140000, + 0x80080580, 0x040207f0, 0x4817500d, 0x45782800, + 0x59c40000, 0x82000500, 0xffff0000, 0x80000120, + 0x82000580, 0x00002422, 0x04020005, 0x59a80005, + 0x8400054e, 0x48035005, 0x0401f008, 0x59e00003, + 0x82000500, 0x00030000, 0x04000004, 0x59a80005, + 0x84000554, 0x48035005, 0x42000800, 0x00000040, + 0x59a80005, 0x8c000514, 0x0402000e, 0x42000800, + 0x00001000, 0x82141480, 0x0017ffff, 0x04021009, + 0x80040902, 0x82141480, 0x0013ffff, 0x04021005, + 0x80040902, 0x82141480, 0x0011ffff, 0x04001b8d, + 0x4807500e, 0x42001000, 0x00000024, 0x0201f800, + 0x00106681, 0x82040c00, 0x0010d1c0, 0x4807500b, + 0x4a03c810, 0x00100000, 0x4a03c811, 0x0010ab4a, + 0x4a03c829, 0x00000004, 0x59e40001, 0x82000540, + 0x0003001d, 0x4803c801, 0x4a03c014, 0x001c001c, + 0x42001000, 0x0000001c, 0x0201f800, 0x001006e2, + 0x4202c000, 0x0010d1c0, 0x59aab00b, 0x59aaa00b, + 0x59aaa80b, 0x59aac80e, 0x49675069, 0x59a8000b, + 0x4803500c, 0x0401fbf5, 0x0201f800, 0x00107903, + 0x0201f800, 0x001007be, 0x0201f800, 0x00100807, + 0x0201f800, 0x00101a05, 0x0201f800, 0x00101354, + 0x0201f800, 0x00100969, 0x0201f800, 0x00101354, + 0x0201f800, 0x00100f4c, 0x0201f800, 0x001066c1, + 0x0401fb1a, 0x0201f800, 0x0010220e, 0x0201f800, + 0x001053bb, 0x0201f800, 0x00104c90, 0x0201f800, + 0x00106194, 0x0201f800, 0x00105f28, 0x0201f800, + 0x001013ed, 0x0201f800, 0x0010126f, 0x4203e000, + 0xf0000001, 0x42000000, 0x00001000, 0x50000000, + 0x82000480, 0x24220001, 0x04000016, 0x59e00002, + 0x8c00051e, 0x42000000, 0x7ffe00fe, 0x04020003, + 0x42000000, 0x7ffe01fe, 0x50000800, 0x48075058, + 0x80040920, 0x82040580, 0x0000013a, 0x04000004, + 0x82040580, 0x0000013b, 0x04020006, 0x59a80005, + 0x84000552, 0x48035005, 0x4a0378e4, 0x000c0000, + 0x4a03c018, 0x0000000f, 0x4203e000, 0x20000511, + 0x4203e000, 0x50010000, 0x4a03c020, 0x00000000, + 0x04027013, 0x59e00020, 0x82000580, 0x00000002, + 0x0402000f, 0x4a03c020, 0x00004000, 0x4a03c011, + 0x40000010, 0x04006000, 0x4203e000, 0x40000000, + 0x59e00017, 0x8c000508, 0x04000003, 0x4a03c017, + 0x00000000, 0x4203e000, 0x30000001, 0x4202d800, + 0x00000000, 0x4203e000, 0xb0600000, 0x59a80005, + 0x42000800, 0x00000002, 0x8c000512, 0x04020007, + 0x42000800, 0x0000000f, 0x8c000514, 0x04020003, + 0x42000800, 0x00000001, 0x4007f800, 0x59a80005, + 0x8c000514, 0x02020000, 0x00020004, 0x59e00003, + 0x82000500, 0x00030000, 0x82000580, 0x00000000, + 0x04020af8, 0x0201f000, 0x00020004, 0x4df00000, + 0x4203e000, 0x50000000, 0x416c0000, 0x82000c80, + 0x00000008, 0x04021aef, 0x0c01f804, 0x5c03e000, + 0x0201f000, 0x00020008, 0x001002f7, 0x0010030a, + 0x001003d7, 0x001002f6, 0x00100452, 0x001002f6, + 0x001002f6, 0x00100593, 0x0401fae2, 0x42000800, + 0x0010b4a4, 0x5804001d, 0x4803c857, 0x8c000500, + 0x0400000d, 0x84000500, 0x4800081d, 0x4202d800, + 0x00000004, 0x0401fbd3, 0x49f3c857, 0x5c000800, + 0x5c000000, 0x82000540, 0x00003e00, 0x4c000000, + 0x4c040000, 0x1c01f000, 0x0401fbbd, 0x0201f800, + 0x0010513b, 0x04000009, 0x0201f800, 0x00105151, + 0x0402002e, 0x59c40006, 0x82000540, 0x000000c0, + 0x48038806, 0x0401f029, 0x0201f800, 0x001050a2, + 0x836c0580, 0x00000001, 0x040200bc, 0x59a80017, + 0x82000580, 0x00000009, 0x040200b8, 0x497b5010, + 0x4a038893, 0x00000001, 0x42001000, 0x000000f0, + 0x0201f800, 0x0010193d, 0x0201f800, 0x00105149, + 0x59c41006, 0x04020006, 0x82081540, 0x000000f1, + 0x82081500, 0xbbffffff, 0x0401f003, 0x82081540, + 0x440000f1, 0x480b8806, 0x0201f800, 0x0010609e, + 0x4a0378e4, 0x00002000, 0x42000000, 0x0010b83a, + 0x0201f800, 0x0010aa47, 0x42001000, 0x00008030, + 0x497b5013, 0x0401f035, 0x0201f800, 0x00103b38, + 0x59c400a4, 0x82000500, 0x0000000f, 0x82000480, + 0x00000007, 0x04021091, 0x0201f800, 0x0010609e, + 0x59c400a3, 0x82000500, 0xffefffff, 0x480388a3, + 0x59a8004b, 0x800001c0, 0x04020004, 0x0201f800, + 0x00104139, 0x0401f085, 0x59a80015, 0x84000546, + 0x48035015, 0x0201f800, 0x00105141, 0x59c41006, + 0x04020006, 0x82081540, 0x44000001, 0x82081500, + 0xffffff0f, 0x0401f003, 0x82081540, 0x440000f1, + 0x480b8806, 0x497b9005, 0x4a038802, 0x0000ffff, + 0x4a0378e4, 0x00003000, 0x42000000, 0x0010b80c, + 0x0201f800, 0x0010aa47, 0x59a81010, 0x42000800, + 0x00000003, 0x0201f800, 0x00106c78, 0x42001000, + 0x00008010, 0x59a8180a, 0x0201f800, 0x00103a3e, + 0x0201f800, 0x00101815, 0x59a80805, 0x82040d00, + 0xffffffdf, 0x48075005, 0x0201f800, 0x0010483d, + 0x0201f800, 0x0010513b, 0x0400000a, 0x0201f800, + 0x0010413e, 0x04000007, 0x4a035013, 0x00000001, + 0x497b5021, 0x0201f800, 0x00103c80, 0x0401f04f, + 0x0201f800, 0x001048ec, 0x04000005, 0x59c41002, + 0x8408150c, 0x480b8802, 0x0401f012, 0x0201f800, + 0x0010513b, 0x04020006, 0x59a8001d, 0x80000540, + 0x02000800, 0x0010930f, 0x0401f00a, 0x0201f800, + 0x0010930f, 0x59a80026, 0x8c000506, 0x04020005, + 0x59a8001d, 0x80000540, 0x02020800, 0x00104245, + 0x497b5028, 0x497b5027, 0x497b5018, 0x0201f800, + 0x0010513b, 0x59a81026, 0x0402000a, 0x0201f800, + 0x0010162a, 0x80001580, 0x59a8002a, 0x82000500, + 0xffff0000, 0x80040d40, 0x4807502a, 0x0401f005, + 0x59a8002a, 0x82000500, 0xffff0000, 0x4803502a, + 0x599c0017, 0x8c00050a, 0x04000002, 0x84081544, + 0x480b5026, 0x0201f800, 0x0010513b, 0x04000004, + 0x0201f800, 0x0010162a, 0x48078880, 0x42001000, + 0x00000005, 0x0201f800, 0x001070b0, 0x497b5028, + 0x497b501b, 0x4a03501c, 0x0000ffff, 0x4a0378e4, + 0x000000c0, 0x4202d800, 0x00000002, 0x0201f800, + 0x0010513b, 0x04000007, 0x59a80026, 0x82000500, + 0x0000000c, 0x82000580, 0x00000004, 0x04000003, + 0x0201f800, 0x00101e45, 0x1c01f000, 0x59a8001c, + 0x82000580, 0x0000ffff, 0x04000004, 0x0201f800, + 0x00101e45, 0x0401f074, 0x59a80026, 0x8c00050a, + 0x04020003, 0x8c000506, 0x0400001c, 0x8c000500, + 0x0400001a, 0x4a038802, 0x0000ffbf, 0x8c000502, + 0x04000016, 0x599c0018, 0x8c000516, 0x04020010, + 0x59a80027, 0x82000580, 0x0000ffff, 0x0400000c, + 0x0201f800, 0x00101f9a, 0x59a80026, 0x8c000504, + 0x0402005d, 0x42001000, 0x00000003, 0x417a5800, + 0x0201f800, 0x00101fbf, 0x0401f057, 0x59a80028, + 0x80000540, 0x04020054, 0x59a80026, 0x8c000508, + 0x04020005, 0x59a8001b, 0x80000540, 0x0402004e, + 0x0401f003, 0x8c000516, 0x0400004b, 0x0201f800, + 0x001048ec, 0x04020048, 0x599c0018, 0x8c000516, + 0x04020004, 0x0201f800, 0x00104c51, 0x04020042, + 0x599c0017, 0x8c00050a, 0x0400000d, 0x4200b000, + 0x000007f0, 0x417a8800, 0x0201f800, 0x00020245, + 0x04020004, 0x59340200, 0x8c00051a, 0x04020036, + 0x81468800, 0x8058b040, 0x040207f8, 0x4a038802, + 0x0000ffff, 0x42001800, 0x0010b4eb, 0x0401fb8c, + 0x42001800, 0x0010b4f8, 0x0401fb89, 0x59a80005, + 0x84000502, 0x48035005, 0x4a0378e4, 0x00000080, + 0x4202d800, 0x00000003, 0x4a03501c, 0x0000ffff, + 0x0401fa7f, 0x80000580, 0x0201f800, 0x00101590, + 0x599c0018, 0x8c000516, 0x04000004, 0x0201f800, + 0x00103b10, 0x0401f009, 0x42001800, 0x0000ffff, + 0x42002000, 0x00000006, 0x42003000, 0x00000000, + 0x0201f800, 0x00103aae, 0x0201f800, 0x00105151, + 0x0400000b, 0x59c40006, 0x0201f800, 0x0010513b, + 0x04000004, 0x82000500, 0xffffff0f, 0x0401f003, + 0x82000500, 0xfbffffff, 0x48038806, 0x0201f800, + 0x00106f36, 0x1c01f000, 0x4c040000, 0x4c080000, + 0x4c100000, 0x59a8003e, 0x82000c80, 0x00000004, + 0x04021980, 0x0c01f805, 0x5c002000, 0x5c001000, + 0x5c000800, 0x1c01f000, 0x00100462, 0x001004ea, + 0x00100516, 0x00100577, 0x42000000, 0x00000001, + 0x0201f800, 0x00101590, 0x0201f800, 0x0010609e, + 0x59c408a3, 0x82040d00, 0xfffffff7, 0x480788a3, + 0x0201f800, 0x00105141, 0x0400000e, 0x0201f800, + 0x00105151, 0x0400000b, 0x0201f800, 0x00105149, + 0x04020964, 0x59c400a3, 0x84000532, 0x84000570, + 0x480388a3, 0x4a038808, 0x00000008, 0x0401f010, + 0x59c400a3, 0x84000530, 0x82000500, 0xbf7fffff, + 0x480388a3, 0x42000800, 0x000000f8, 0x0201f800, + 0x00104200, 0x59c400a3, 0x82000540, 0x00018000, + 0x8400051c, 0x480388a3, 0x497b8808, 0x59c40006, + 0x82000500, 0xfbffff0e, 0x48038806, 0x497b2822, + 0x497b2823, 0x42000800, 0x000001f4, 0x42001000, + 0x00100591, 0x0201f800, 0x00105f83, 0x59c40805, + 0x42001000, 0x00000001, 0x0201f800, 0x0010193d, + 0x0201f800, 0x0010163b, 0x0402000a, 0x42000000, + 0x00000001, 0x0201f800, 0x0010188c, 0x42000000, + 0x00000001, 0x0201f800, 0x00101821, 0x0401f022, + 0x0201f800, 0x00101642, 0x04020008, 0x41780000, + 0x0201f800, 0x0010188c, 0x41780000, 0x0201f800, + 0x00101821, 0x0401f018, 0x0201f800, 0x00101649, + 0x0402000a, 0x42000000, 0x00000002, 0x0201f800, + 0x0010188c, 0x42000000, 0x00000002, 0x0201f800, + 0x00101821, 0x0401f00c, 0x0201f800, 0x00101650, + 0x04020918, 0x59a80049, 0x800001c0, 0x04000006, + 0x0201f800, 0x00101656, 0x4a03503e, 0x00000001, + 0x0401f021, 0x0201f800, 0x00101927, 0x4a03503e, + 0x00000001, 0x0201f800, 0x00105141, 0x0400000c, + 0x0201f800, 0x00105151, 0x04000009, 0x0201f800, + 0x00105149, 0x04020903, 0x4a035033, 0x00000001, + 0x0201f800, 0x001050a2, 0x0401f00f, 0x59c400a4, + 0x82000500, 0x0000000f, 0x82000580, 0x00000008, + 0x04000003, 0x4a038805, 0x04000000, 0x59c400a3, + 0x82000540, 0x0001c000, 0x480388a3, 0x84000520, + 0x480388a3, 0x1c01f000, 0x0401f8a3, 0x04020004, + 0x4a03503e, 0x00000003, 0x0401f027, 0x0201f800, + 0x00101650, 0x04020011, 0x59a80049, 0x800001c0, + 0x0400000e, 0x0201f800, 0x00101656, 0x59a80048, + 0x8c00051e, 0x0400001c, 0x0201f800, 0x00105149, + 0x04020009, 0x4a035033, 0x00000001, 0x0201f800, + 0x001050a2, 0x0401f004, 0x0201f800, 0x001018d3, + 0x04020011, 0x0201f800, 0x00101815, 0x4a03503e, + 0x00000002, 0x497b5049, 0x59c400a3, 0x84000520, + 0x480388a3, 0x497b2822, 0x497b2823, 0x42000800, + 0x0000002d, 0x42001000, 0x00100591, 0x0201f800, + 0x00105f83, 0x1c01f000, 0x0401f877, 0x04020004, + 0x4a03503e, 0x00000003, 0x0401f05b, 0x4a038805, + 0x000000f0, 0x0201f800, 0x001018d3, 0x04020050, + 0x0201f800, 0x00105149, 0x04000044, 0x59c400a4, + 0x82000500, 0x0000000f, 0x82000580, 0x00000008, + 0x04000020, 0x59c40005, 0x8c000534, 0x0402001d, + 0x59940022, 0x82000580, 0x00000001, 0x04020046, + 0x0201f800, 0x00105151, 0x04020043, 0x4a038805, + 0x000000f0, 0x0201f800, 0x00105196, 0x4a035032, + 0x0000aaaa, 0x4a035033, 0x00000000, 0x59c408a3, + 0x82040d40, 0x00000008, 0x480788a3, 0x4202d800, + 0x00000001, 0x4a03503e, 0x00000000, 0x4a038805, + 0x00000001, 0x497b2822, 0x497b2823, 0x0401f01f, + 0x0201f800, 0x00105151, 0x04020007, 0x59a80032, + 0x82000580, 0x0000aaaa, 0x04020003, 0x4a035010, + 0x00ffffff, 0x497b5032, 0x59c40006, 0x82000540, + 0x04000001, 0x48038806, 0x59a80805, 0x8c040d06, + 0x04020005, 0x59c408a3, 0x82040d40, 0x00000008, + 0x480788a3, 0x4202d800, 0x00000001, 0x4a03503e, + 0x00000000, 0x4a038805, 0x00000001, 0x497b2822, + 0x497b2823, 0x0401f010, 0x59c40005, 0x82000500, + 0x000000c0, 0x0400000c, 0x59c40006, 0x82000540, + 0x000000f1, 0x48038806, 0x0401f7ef, 0x0201f800, + 0x00101650, 0x04020004, 0x59a80049, 0x800001c0, + 0x040207a4, 0x497b8885, 0x1c01f000, 0x4803c856, + 0x42000000, 0x00000001, 0x0201f800, 0x00101590, + 0x4a03503e, 0x00000000, 0x0201f800, 0x00101650, + 0x0402000b, 0x59a80052, 0x800001c0, 0x04000004, + 0x80000040, 0x48035052, 0x04020005, 0x4a035052, + 0x0000000a, 0x4a035049, 0x00000001, 0x497b8885, + 0x0401f0ed, 0x59940022, 0x59940823, 0x80040540, + 0x1c01f000, 0x497b2823, 0x1c01f000, 0x4c080000, + 0x42001000, 0x000000f0, 0x0201f800, 0x0010193d, + 0x5c001000, 0x1c01f000, 0x4a03505c, 0x00000004, + 0x4a03505d, 0x00000000, 0x4a03505e, 0x00000010, + 0x4a03505f, 0x00000002, 0x4a035010, 0x00ffffff, + 0x0201f800, 0x0010930f, 0x4a03502a, 0x20200000, + 0x4a03502b, 0x88000200, 0x4a03502c, 0x00ff001f, + 0x4a03502d, 0x000007d0, 0x4a03502e, 0x80000000, + 0x4a03502f, 0x00000200, 0x4a035030, 0x00ff0000, + 0x4a035031, 0x00010000, 0x4a03503a, 0x514c4f47, + 0x4a03503b, 0x49432020, 0x1c01f000, 0x4d440000, + 0x417a8800, 0x41780800, 0x0201f800, 0x00020245, + 0x04020005, 0x0201f800, 0x001049e7, 0x04020002, + 0x80040800, 0x81468800, 0x83440580, 0x000007f0, + 0x040207f6, 0x5c028800, 0x1c01f000, 0x4803c857, + 0x5c000000, 0x4c000000, 0x4803c857, 0x0401f809, + 0x485fc857, 0x4203e000, 0x50000000, 0x5c000000, + 0x4d780000, 0x4200b800, 0x00008002, 0x0401f006, + 0x485fc857, 0x4203e000, 0x50000000, 0x4200b800, + 0x00008002, 0x04006000, 0x4c000000, 0x4c040000, + 0x59bc00ea, 0x82000500, 0x00000007, 0x82000580, + 0x00000001, 0x04020005, 0x42000800, 0x00000000, + 0x0201f800, 0x00106c6c, 0x5c000800, 0x4807c025, + 0x80040920, 0x4807c026, 0x5c000000, 0x4803c023, + 0x80000120, 0x4803c024, 0x5c000000, 0x4803c857, + 0x4803c021, 0x80000120, 0x4803c022, 0x41f80000, + 0x4803c027, 0x80000120, 0x4803c028, 0x42000000, + 0x00001000, 0x50000000, 0x82000480, 0x24320001, + 0x4803c857, 0x0400104f, 0x42000800, 0x00000064, + 0x80040840, 0x04000007, 0x4a030000, 0x00000001, + 0x40000000, 0x59800000, 0x8c000500, 0x040007f9, + 0x04000042, 0x42000800, 0x0010c1a3, 0x46000800, + 0xfaceface, 0x80040800, 0x42001000, 0x00007a00, + 0x58080013, 0x44000800, 0x80040800, 0x58080019, + 0x44000800, 0x80040800, 0x5808001a, 0x44000800, + 0x80040800, 0x5808001b, 0x44000800, 0x80040800, + 0x5808001c, 0x44000800, 0x80040800, 0x5808001f, + 0x44000800, 0x80040800, 0x42001000, 0x00007a40, + 0x42001800, 0x0000000b, 0x50080000, 0x44000800, + 0x80081000, 0x80040800, 0x800c1840, 0x040207fb, + 0x42001800, 0x00000003, 0x42001000, 0x00007b00, + 0x480c1003, 0x58080005, 0x44000800, 0x80040800, + 0x800c1840, 0x040217fb, 0x42001000, 0x00007c00, + 0x58080002, 0x44000800, 0x80040800, 0x58080003, + 0x44000800, 0x80040800, 0x58080020, 0x44000800, + 0x80040800, 0x58080021, 0x44000800, 0x80040800, + 0x58080022, 0x44000800, 0x80040800, 0x58080023, + 0x44000800, 0x80040800, 0x4a030000, 0x00000000, + 0x485fc020, 0x905cb9c0, 0x825cbd40, 0x00000012, + 0x485fc011, 0x4203e000, 0x40000000, 0x4202d800, + 0x00000005, 0x59e00017, 0x8c000508, 0x04000003, + 0x4a03c017, 0x00000002, 0x4203e000, 0x30000001, + 0x0401f81a, 0x0401f7ff, 0x4a03c850, 0x0010c1bf, + 0x4a03c851, 0x0010d1be, 0x4a03c853, 0x00000800, + 0x4a03c855, 0x0001eb5a, 0x59e40001, 0x82000540, + 0x00003f00, 0x4803c801, 0x4a03b104, 0x70000002, + 0x4a03a804, 0x70000002, 0x4a03b004, 0x70000002, + 0x42000000, 0x0010b8ec, 0x49780001, 0x49780002, + 0x1c01f000, 0x1c01f000, 0x59a8006b, 0x8c000530, + 0x040207fe, 0x4c080000, 0x42001000, 0x00000004, + 0x0401f862, 0x5c001000, 0x4201d000, 0x00028b0a, + 0x0201f800, 0x0010608e, 0x4c080000, 0x42001000, + 0x00000008, 0x0401f859, 0x5c001000, 0x4201d000, + 0x00028b0a, 0x0201f800, 0x0010608e, 0x4c080000, + 0x42001000, 0x00000010, 0x0401f850, 0x5c001000, + 0x4201d000, 0x00028b0a, 0x0201f800, 0x0010608e, + 0x0401f7e2, 0x8c00050c, 0x59a8086b, 0x04020003, + 0x84040d30, 0x0401f006, 0x84040d70, 0x4807506b, + 0x42001000, 0x00000000, 0x0401f040, 0x4807506b, + 0x836c0500, 0x00000007, 0x0c01f001, 0x001006e1, + 0x001006c7, 0x001006c7, 0x001006af, 0x001006d4, + 0x001006c7, 0x001006c7, 0x001006d4, 0x59a80005, + 0x8c000514, 0x04020013, 0x59c40801, 0x82040d00, + 0x00018000, 0x82040580, 0x00010000, 0x0400000a, + 0x82040580, 0x00008000, 0x04000004, 0x42001000, + 0x42004000, 0x0401f006, 0x42001000, 0x22002000, + 0x0401f003, 0x42001000, 0x12001000, 0x0401f025, + 0x42001000, 0x00001004, 0x0401f022, 0x59a80005, + 0x8c000514, 0x04020008, 0x59a8006b, 0x8c000534, + 0x04020004, 0x42001000, 0x74057005, 0x0401f819, + 0x1c01f000, 0x42001000, 0x00002008, 0x0401f7fc, + 0x59a8006b, 0x8c000534, 0x0402000a, 0x59a80005, + 0x8c000514, 0x04000004, 0x42001000, 0x24052005, + 0x0401f00c, 0x42001000, 0x74057005, 0x0401f009, + 0x1c01f000, 0x1c01f000, 0x82081500, 0x0000001c, + 0x82081540, 0x001c0000, 0x480bc013, 0x1c01f000, + 0x59a8006b, 0x8c000530, 0x04000002, 0x84081570, + 0x480b506b, 0x8c000530, 0x04020005, 0x82081500, + 0x00007000, 0x80081114, 0x0401fff0, 0x1c01f000, + 0x41780000, 0x50041800, 0x800c0400, 0x80040800, + 0x80102040, 0x040207fc, 0x80080500, 0x80000540, + 0x1c01f000, 0x4202f000, 0x00000000, 0x41780000, + 0x41780800, 0x41781000, 0x41781800, 0x41782000, + 0x41782800, 0x41783000, 0x41783800, 0x41784000, + 0x41784800, 0x41785000, 0x41785800, 0x41786000, + 0x41786800, 0x41787000, 0x41787800, 0x41788000, + 0x41788800, 0x41789000, 0x41789800, 0x4178a000, + 0x4178a800, 0x4178b000, 0x4178b800, 0x4178c000, + 0x4178c800, 0x4178d000, 0x4178d800, 0x4178e000, + 0x4178e800, 0x4178f000, 0x4178f800, 0x41790000, + 0x41790800, 0x41791000, 0x41791800, 0x41792000, + 0x41792800, 0x41793000, 0x41793800, 0x41794000, + 0x41794800, 0x41795000, 0x41795800, 0x41796000, + 0x41796800, 0x41797000, 0x41797800, 0x41798000, + 0x41798800, 0x42019000, 0x0010b537, 0x42019800, + 0x0010b50e, 0x4179a000, 0x4179b000, 0x4179a800, + 0x4179b800, 0x4179c800, 0x4179c000, 0x4179d000, + 0x4179d800, 0x4179e000, 0x4179e800, 0x4179f000, + 0x4179f800, 0x417a0000, 0x417a0800, 0x417a1000, + 0x417a1800, 0x417a2000, 0x42022800, 0x00006100, + 0x417a3000, 0x417a3800, 0x417a4000, 0x417a4800, + 0x417a5000, 0x417a5800, 0x417a6000, 0x417a6800, + 0x417a7000, 0x417a7800, 0x417a8000, 0x417a8800, + 0x417a9000, 0x417a9800, 0x417ae800, 0x417af800, + 0x42030000, 0x00007c00, 0x42031000, 0x0010b806, + 0x42031800, 0x0000bf1d, 0x42032000, 0x0000bf32, + 0x42032800, 0x0010b7ce, 0x42033000, 0x0010b46e, + 0x42034000, 0x0010b4a4, 0x42033800, 0x0010b4c3, + 0x42034800, 0x0010b544, 0x42035000, 0x0010b400, + 0x42035800, 0x0010ac00, 0x42030800, 0x0010b505, + 0x417b6000, 0x42036800, 0x00006f00, 0x4203c800, + 0x00003000, 0x42037000, 0x0000ff00, 0x42037800, + 0x0000bf00, 0x42038000, 0x00007700, 0x42038800, + 0x00004000, 0x42039000, 0x00006000, 0x42039800, + 0x0010bedb, 0x4203a000, 0x00007600, 0x4203a800, + 0x00007400, 0x4203b000, 0x00007200, 0x4203b800, + 0x00007100, 0x4203c000, 0x00007000, 0x4203d000, + 0x00000000, 0x4203e800, 0x00101b95, 0x417bd800, + 0x1c01f000, 0x42000800, 0x00100000, 0x50040000, + 0x4c000000, 0x42000000, 0x0000aaaa, 0x44000800, + 0x42001800, 0x00005555, 0x41782000, 0x82102400, + 0x00010000, 0x40100000, 0x80042c00, 0x440c2800, + 0x42003000, 0x0000000a, 0x80183040, 0x040207ff, + 0x50140000, 0x800c0580, 0x04020004, 0x50040000, + 0x800c0580, 0x040207f2, 0x5c000000, 0x44000800, + 0x80142840, 0x4817c861, 0x1c01f000, 0x59a8081f, + 0x800409c0, 0x04020009, 0x49781c0c, 0x4a001a0c, + 0x00000200, 0x4a001804, 0x07000000, 0x59a80010, + 0x9c0001c0, 0x48001805, 0x0401fe01, 0x9c0409c0, + 0x48041806, 0x1c01f000, 0x59a8080c, 0x4006d000, + 0x4202b800, 0x00000001, 0x59a8180d, 0x480fc857, + 0x82041400, 0x00000014, 0x82082400, 0x00000014, + 0x40100000, 0x800c0480, 0x04001006, 0x44080800, + 0x40080800, 0x40101000, 0x815eb800, 0x0401f7f7, + 0x45780800, 0x495f5020, 0x1c01f000, 0x835c0480, + 0x00000020, 0x04001009, 0x496bc857, 0x815eb840, + 0x416a5800, 0x592ed000, 0x497a5800, 0x497a5801, + 0x812e59c0, 0x1c01f000, 0x42000000, 0x0010b853, + 0x0201f800, 0x0010aa47, 0x417a5800, 0x0401f7f9, + 0x815eb840, 0x04001008, 0x416a5800, 0x492fc857, + 0x592ed000, 0x497a5800, 0x497a5801, 0x812e59c0, + 0x1c01f000, 0x42000000, 0x0010b853, 0x0201f800, + 0x0010aa47, 0x417ab800, 0x417a5800, 0x0401f7f8, + 0x492fc857, 0x496a5800, 0x412ed000, 0x815eb800, + 0x59c80000, 0x82000540, 0x00001200, 0x48039000, + 0x1c01f000, 0x492fc857, 0x812e59c0, 0x04000007, + 0x592c0001, 0x497a5801, 0x4c000000, 0x0401fff1, + 0x5c025800, 0x0401f7f9, 0x1c01f000, 0x4807c856, + 0x42007000, 0x0010b7f8, 0x4a007001, 0x00000000, + 0x59e00003, 0x82000540, 0x00008080, 0x4803c003, + 0x4a03b805, 0x90000001, 0x59dc0006, 0x4a03b805, + 0x70000000, 0x59dc0006, 0x4a03b805, 0x30000000, + 0x4200b000, 0x00000020, 0x497bb807, 0x8058b040, + 0x040207fe, 0x4a03b805, 0x30000000, 0x59dc0006, + 0x4a03b805, 0x60000001, 0x59dc0006, 0x4a03b805, + 0x70000001, 0x59dc0006, 0x4a03b805, 0x30000002, + 0x4200b000, 0x00000020, 0x497bb807, 0x8058b040, + 0x040207fe, 0x4a03b805, 0x30000000, 0x59dc0006, + 0x4a03b805, 0x60000001, 0x0401ffa1, 0x04000da5, + 0x42001000, 0x0010b7f6, 0x452c1000, 0x4a025801, + 0x00000001, 0x4a025802, 0x00000100, 0x4a025809, + 0x00107149, 0x497a580a, 0x497a580b, 0x497a580c, + 0x0401ff93, 0x04000d97, 0x42001000, 0x0010b7f7, + 0x452c1000, 0x4a025801, 0x00000000, 0x4a025802, + 0x00000100, 0x4a025809, 0x001011bc, 0x497a5803, + 0x497a5807, 0x497a5808, 0x497a580a, 0x59a80005, + 0x8c00050e, 0x04000006, 0x4a03b805, 0xe0000001, + 0x59dc0006, 0x8c000522, 0x040007fc, 0x1c01f000, + 0x4df00000, 0x4203e000, 0x50000000, 0x4c380000, + 0x40087000, 0x480bc857, 0x4a007002, 0x00000000, + 0x42007000, 0x0010b7f8, 0x82080400, 0x00000000, + 0x45780000, 0x58380005, 0x48087005, 0x80000540, + 0x04000005, 0x82000400, 0x00000000, 0x44080000, + 0x0401f003, 0x480bc857, 0x48087006, 0x58380001, + 0x80000540, 0x0400080c, 0x5c007000, 0x5c03e000, + 0x1c01f000, 0x4c380000, 0x42007000, 0x0010b7f8, + 0x58380001, 0x80000540, 0x04000803, 0x5c007000, + 0x1c01f000, 0x42007000, 0x0010b7f8, 0x58380001, + 0x82000580, 0x00000000, 0x04020012, 0x58380000, + 0x0c01f001, 0x0010088e, 0x0010088d, 0x0010088d, + 0x0010088d, 0x0010088d, 0x0010088d, 0x0010088d, + 0x0010088d, 0x0401fd4b, 0x58380808, 0x800409c0, + 0x04020024, 0x58380006, 0x80000540, 0x04020002, + 0x1c01f000, 0x4803c857, 0x48007002, 0x40006800, + 0x58340000, 0x80000540, 0x04020002, 0x48007005, + 0x48007006, 0x4a03b805, 0x20000000, 0x59dc0006, + 0x4a03b805, 0x30000000, 0x58340007, 0x4803b800, + 0x58340008, 0x4803b801, 0x58340004, 0x48007003, + 0x58340003, 0x48007004, 0x4803b803, 0x58340001, + 0x8c000500, 0x04000004, 0x4a007001, 0x00000001, + 0x0401f028, 0x4a007001, 0x00000002, 0x0401f03d, + 0x0201f800, 0x001093ea, 0x0201f800, 0x0010a69d, + 0x04000017, 0x4a03b805, 0x20000000, 0x59dc0006, + 0x4a03b805, 0x30000000, 0x4807b800, 0x480bb801, + 0x4a007003, 0x00000010, 0x480c7009, 0x42001000, + 0x00100875, 0x0201f800, 0x00105f9a, 0x58380008, + 0x82000400, 0x00000004, 0x48007004, 0x4803b803, + 0x4a007001, 0x00000007, 0x0401f022, 0x0201f800, + 0x00109402, 0x42000800, 0x00000001, 0x42001000, + 0x00100875, 0x0201f800, 0x00105f76, 0x0401f7ba, + 0x4c040000, 0x4c080000, 0x58380803, 0x42001000, + 0x00003fff, 0x82040480, 0x00003fff, 0x04021003, + 0x40041000, 0x80000580, 0x48007003, 0x800800c4, + 0x4803b802, 0x4a03b805, 0x30000002, 0x59dc0006, + 0x4a03b805, 0x70000001, 0x59dc0006, 0x4a03b805, + 0x10000000, 0x5c001000, 0x5c000800, 0x1c01f000, + 0x483bc857, 0x4c040000, 0x4c080000, 0x58380803, + 0x42001000, 0x00003fff, 0x82040480, 0x00003fff, + 0x04021003, 0x40041000, 0x80000580, 0x48007003, + 0x800800c4, 0x4803b802, 0x4a03b805, 0x10000002, + 0x5c001000, 0x5c000800, 0x1c01f000, 0x4c040000, + 0x4c380000, 0x42007000, 0x0010b7f8, 0x59dc0806, + 0x4807c857, 0x4a03b805, 0x20000000, 0x8c040d3e, + 0x04000007, 0x8c040d08, 0x04020cca, 0x58380001, + 0x82000500, 0x00000007, 0x0c01f804, 0x5c007000, + 0x5c000800, 0x1c01f000, 0x0010087d, 0x0010091e, + 0x0010092e, 0x001005d8, 0x001005d8, 0x001005d8, + 0x001005d8, 0x001011ea, 0x4807c856, 0x82040d00, + 0x43000f80, 0x04020009, 0x58380003, 0x80000540, + 0x0400001c, 0x59dc0000, 0x4803b800, 0x59dc0001, + 0x4803b801, 0x0401f7af, 0x58380802, 0x4a000802, + 0x00000200, 0x0401f01e, 0x4807c856, 0x82040d00, + 0x43000f80, 0x04020009, 0x58380003, 0x80000540, + 0x0400000c, 0x59dc0000, 0x4803b800, 0x59dc0001, + 0x4803b801, 0x0401f7b7, 0x58380002, 0x82000400, + 0x00000002, 0x46000000, 0x00000200, 0x0401f00c, + 0x4c340000, 0x58386802, 0x59dc0000, 0x4803c857, + 0x48006807, 0x59dc0001, 0x4803c857, 0x48006808, + 0x4a006802, 0x00000100, 0x5c006800, 0x4a007001, + 0x00000000, 0x4c300000, 0x58386002, 0x0401f80c, + 0x04000009, 0x58300009, 0x82000c80, 0x0010ab4a, + 0x04021c84, 0x82000c80, 0x00020000, 0x04001c81, + 0x0801f800, 0x5c006000, 0x0401f723, 0x4833c857, + 0x803061c0, 0x04000009, 0x59a8000c, 0x80300480, + 0x04001007, 0x59a8000d, 0x80300480, 0x04021004, + 0x82000540, 0x00000001, 0x1c01f000, 0x80000580, + 0x1c01f000, 0x4803c856, 0x4dc00000, 0x42007000, + 0x0010b803, 0x4a007400, 0x00000000, 0x49787001, + 0x42038000, 0x00007720, 0x4a038006, 0x60000001, + 0x4a038009, 0xf4f60000, 0x42038000, 0x00007700, + 0x4a038006, 0x60000001, 0x4a038009, 0xf4f60000, + 0x4a03c822, 0x00000010, 0x4a0370e8, 0x00000000, + 0x0401f809, 0x4a0370e9, 0x00003a0f, 0x4a0370e8, + 0x00000000, 0x4a0370e8, 0x00000001, 0x5c038000, + 0x1c01f000, 0x4c5c0000, 0x4178b800, 0x0401f80a, + 0x5c00b800, 0x1c01f000, 0x4803c856, 0x4c5c0000, + 0x825cbd40, 0x00000001, 0x0401f803, 0x5c00b800, + 0x1c01f000, 0x4803c856, 0x4dc00000, 0x4c500000, + 0x4c580000, 0x4c540000, 0x4a0370e8, 0x00000000, + 0x805cb9c0, 0x04000009, 0x4a038807, 0x00000004, + 0x59b800ea, 0x8c000510, 0x04000004, 0x59b800e0, + 0x0401f87b, 0x0401f7fb, 0x42038000, 0x00007720, + 0x0201f800, 0x00100ec1, 0x59c00007, 0x4a038006, + 0x20000000, 0x59c00007, 0x4a038006, 0x8000000a, + 0x59c00007, 0x4a038006, 0x8000000b, 0x59c00007, + 0x4a038006, 0x40000001, 0x83c00580, 0x00007700, + 0x04000004, 0x42038000, 0x00007700, 0x0401f7ed, + 0x42038000, 0x00007720, 0x42000800, 0x00000800, + 0x59c00007, 0x8c00051e, 0x04000006, 0x4a038006, + 0x90000001, 0x80040840, 0x040207fa, 0x0401fc11, + 0x83c00580, 0x00007700, 0x04000004, 0x42038000, + 0x00007700, 0x0401f7f1, 0x805cb9c0, 0x0402001d, + 0x4200b000, 0x00000020, 0x83b8ac00, 0x00000020, + 0x0201f800, 0x0010ab20, 0x4a0370fb, 0x00000001, + 0x4a037020, 0x001010bd, 0x59a80039, 0x82000500, + 0x0000ffff, 0x48037021, 0x4a037035, 0x0010bddb, + 0x4a037030, 0x0010b410, 0x4a037031, 0x0010ac00, + 0x4a037032, 0x0010b519, 0x4a037036, 0x0010b524, + 0x59840002, 0x48037034, 0x4a037038, 0x001010b4, + 0x4a0370fb, 0x00000001, 0x4178a000, 0x4200b000, + 0x00000020, 0x83b8ac00, 0x00000000, 0x0201f800, + 0x0010ab20, 0x4200b000, 0x00000040, 0x83b8ac00, + 0x00000040, 0x0201f800, 0x0010ab20, 0x805cb9c0, + 0x04020004, 0x4a0370e4, 0xaaaaaaaa, 0x0401f003, + 0x4a0370e4, 0xa2aaaa82, 0x4a0370e5, 0xaaaaaaaa, + 0x4a0370e6, 0xaaaaaaaa, 0x4a0370fb, 0x00000000, + 0x4a0370e6, 0xaaaaaaaa, 0x42038000, 0x00007720, + 0x4a038006, 0x90000000, 0x59c00007, 0x8c00051e, + 0x02020800, 0x001005d8, 0x42038000, 0x00007700, + 0x4a038006, 0x90000000, 0x59c00007, 0x8c00051e, + 0x02020800, 0x001005d8, 0x5c00a800, 0x5c00b000, + 0x5c00a000, 0x5c038000, 0x1c01f000, 0x4d300000, + 0x4d380000, 0x40026000, 0x82000500, 0x7f000000, + 0x82000580, 0x00000003, 0x0402000f, 0x83326500, + 0x00ffffff, 0x59300203, 0x82000580, 0x00000004, + 0x04020009, 0x59300c06, 0x82040580, 0x00000009, + 0x04020005, 0x42027000, 0x00000047, 0x0201f800, + 0x000207a1, 0x5c027000, 0x5c026000, 0x1c01f000, + 0x4d300000, 0x4d2c0000, 0x4d340000, 0x4d400000, + 0x4cfc0000, 0x4d380000, 0x4d3c0000, 0x4d440000, + 0x4d4c0000, 0x4d480000, 0x4c5c0000, 0x4c600000, + 0x4c640000, 0x4cc80000, 0x4ccc0000, 0x4cf00000, + 0x4cf40000, 0x4cf80000, 0x4cfc0000, 0x4d000000, + 0x4d040000, 0x0201f800, 0x00020015, 0x5c020800, + 0x5c020000, 0x5c01f800, 0x5c01f000, 0x5c01e800, + 0x5c01e000, 0x5c019800, 0x5c019000, 0x5c00c800, + 0x5c00c000, 0x5c00b800, 0x5c029000, 0x5c029800, + 0x5c028800, 0x5c027800, 0x5c027000, 0x5c01f800, + 0x5c028000, 0x5c026800, 0x5c025800, 0x5c026000, + 0x1c01f000, 0x493bc857, 0x0201f000, 0x00020044, + 0x83300500, 0x1f000000, 0x04000008, 0x81326580, + 0x80000130, 0x82000c80, 0x00000014, 0x02021800, + 0x001005d8, 0x0c01f013, 0x83300500, 0x000000ff, + 0x82000c80, 0x00000007, 0x02021800, 0x001005d8, + 0x0c01f025, 0x1c01f000, 0x82000d00, 0xc0000038, + 0x02020800, 0x001005d0, 0x0201f800, 0x001005d8, + 0x00000000, 0x00000048, 0x00000054, 0x00000053, + 0x00100a9b, 0x00100abf, 0x00100aba, 0x00100adf, + 0x00100aa6, 0x00100ab2, 0x00100a9b, 0x00100ada, + 0x00100b1a, 0x00100a9b, 0x00100a9b, 0x00100a9b, + 0x00100a9b, 0x00100b1d, 0x00100b23, 0x00100b34, + 0x00100b45, 0x00100a9b, 0x00100b4e, 0x00100b5a, + 0x00100a9b, 0x00100a9b, 0x00100a9b, 0x0201f800, + 0x001005d8, 0x00100aa4, 0x00100bff, 0x00100aec, + 0x00100b0f, 0x00100aa4, 0x00100aa4, 0x00100aa4, + 0x0201f800, 0x001005d8, 0x4803c856, 0x59300004, + 0x8c00053e, 0x04020005, 0x42027000, 0x00000055, + 0x0201f000, 0x000207a1, 0x0201f800, 0x00106f60, + 0x040007fa, 0x1c01f000, 0x4803c856, 0x0401f8a9, + 0x40002800, 0x41782000, 0x42027000, 0x00000056, + 0x0201f000, 0x000207a1, 0x4803c856, 0x42027000, + 0x00000057, 0x0201f000, 0x000207a1, 0x4803c856, + 0x59300007, 0x8c00051a, 0x04020010, 0x59325808, + 0x812e59c0, 0x04000014, 0x592c0408, 0x8c00051c, + 0x04020003, 0x4a026011, 0xffffffff, 0x59300004, + 0x8c00053e, 0x04020009, 0x42027000, 0x00000048, + 0x0201f000, 0x000207a1, 0x59325808, 0x4a025a06, + 0x00000007, 0x0401f7f4, 0x0201f800, 0x00106f60, + 0x040007f6, 0x1c01f000, 0x4803c856, 0x83300500, + 0x00ffffff, 0x0201f000, 0x001064d7, 0x1c01f000, + 0x4c040000, 0x59b808ea, 0x82040d00, 0x00000007, + 0x82040580, 0x00000003, 0x04000004, 0x42000000, + 0x60000000, 0x0401f8ab, 0x5c000800, 0x1c01f000, + 0x0401f8f9, 0x59325808, 0x812e59c0, 0x04000018, + 0x592c0204, 0x82000500, 0x000000ff, 0x82000d80, + 0x00000029, 0x04020012, 0x59300203, 0x82000580, + 0x00000003, 0x0400000b, 0x59300807, 0x84040d26, + 0x48066007, 0x0201f800, 0x00020086, 0x4a03900d, + 0x00000040, 0x4a0370e5, 0x00000008, 0x1c01f000, + 0x0201f800, 0x00106f60, 0x040007f4, 0x59880052, + 0x80000000, 0x48031052, 0x4a03900d, 0x00000040, + 0x42000000, 0xc0000000, 0x0401f05a, 0x42007800, + 0x0010bde2, 0x42002000, 0x00003000, 0x42003000, + 0x00000105, 0x0201f800, 0x00105e04, 0x4a0370e4, + 0x02000000, 0x1c01f000, 0x4933c857, 0x0201f000, + 0x0002077d, 0x41300800, 0x800409c0, 0x02020800, + 0x001005d8, 0x0201f800, 0x001005d0, 0x4933c857, + 0x813261c0, 0x02000800, 0x001005d8, 0x0401f835, + 0x40002800, 0x0201f800, 0x0010a99c, 0x0401f8ae, + 0x04000007, 0x59326809, 0x59340200, 0x8c00050e, + 0x59300414, 0x02020800, 0x001092ce, 0x1c01f000, + 0x4933c857, 0x813261c0, 0x02000800, 0x001005d8, + 0x0401f8a1, 0x0400000b, 0x59325808, 0x0201f800, + 0x00109037, 0x04000007, 0x592c0208, 0x8400054e, + 0x48025a08, 0x417a7800, 0x0201f800, 0x00108be3, + 0x1c01f000, 0x485fc857, 0x5c000000, 0x4d780000, + 0x4203e000, 0x50000000, 0x4200b800, 0x00008005, + 0x0201f000, 0x001005dd, 0x4933c857, 0x83300480, + 0x00000020, 0x02021800, 0x001005d8, 0x83300c00, + 0x0010b8cc, 0x50040000, 0x80000000, 0x04001002, + 0x44000800, 0x1c01f000, 0x4933c857, 0x0401f7f4, + 0x4807c856, 0x59b800ea, 0x8c000510, 0x040007fd, + 0x59b800e0, 0x4803c857, 0x1c01f000, 0x4803c856, + 0x42000000, 0x10000000, 0x41300800, 0x0401f02d, + 0x82000500, 0xf0000000, 0x82040d00, 0x0fffffff, + 0x80040d40, 0x4807c857, 0x59b800ea, 0x8c000516, + 0x04020003, 0x480770e1, 0x1c01f000, 0x8c000510, + 0x040007fa, 0x4c040000, 0x0401f809, 0x5c000800, + 0x82100480, 0x00000008, 0x040017f4, 0x4c040000, + 0x0401febc, 0x5c000800, 0x0401f7f0, 0x59b800e2, + 0x59b820e2, 0x80100580, 0x040207fd, 0x80102114, + 0x0401f006, 0x59b800e2, 0x59b820e2, 0x80100580, + 0x040207fd, 0x0401f001, 0x40101800, 0x800c190a, + 0x82100500, 0x0000001f, 0x820c1d00, 0x0000001f, + 0x800c2480, 0x82102500, 0x0000001f, 0x1c01f000, + 0x82000500, 0xf0000000, 0x82040d00, 0x0fffffff, + 0x80040d40, 0x4807c857, 0x42001000, 0x0010b804, + 0x50080000, 0x80000540, 0x04020005, 0x4a0370e5, + 0x00000003, 0x4a0370e4, 0x00000300, 0x80000000, + 0x44001000, 0x42001000, 0x00000400, 0x59b800ea, + 0x8c000510, 0x0400000c, 0x0401ffd5, 0x82100480, + 0x00000008, 0x04001007, 0x4c040000, 0x4c080000, + 0x0401fe88, 0x5c001000, 0x5c000800, 0x0401f020, + 0x59b800ea, 0x8c000516, 0x0402001d, 0x4a0370e4, + 0x00300000, 0x480770e1, 0x42001000, 0x0000ff00, + 0x80081040, 0x04000012, 0x59b808e4, 0x8c040d28, + 0x040207fc, 0x42001000, 0x0010b804, 0x50080000, + 0x80000040, 0x04020005, 0x4a0370e5, 0x00000002, + 0x4a0370e4, 0x00000200, 0x02001800, 0x001005d8, + 0x44001000, 0x8c040d2c, 0x1c01f000, 0x41f80000, + 0x50000000, 0x0201f800, 0x001005d8, 0x80081040, + 0x040207d3, 0x41f80000, 0x50000000, 0x0201f800, + 0x001005d8, 0x4d380000, 0x59300c06, 0x82040580, + 0x00000009, 0x04020006, 0x42027000, 0x00000047, + 0x0201f800, 0x000207a1, 0x80000580, 0x5c027000, + 0x1c01f000, 0x4c500000, 0x4a03900d, 0x00000001, + 0x59c8a020, 0x4a03900d, 0x00000002, 0x59c80820, + 0x8c50a52e, 0x04000002, 0x900409c0, 0x82040d00, + 0x0000ffff, 0x0201f800, 0x00105dd7, 0x02000800, + 0x001005d8, 0x4933c857, 0x8250a500, 0xff000000, + 0x82500580, 0x05000000, 0x04000003, 0x82000540, + 0x00000001, 0x5c00a000, 0x1c01f000, 0x0401ffe6, + 0x4933c857, 0x59300406, 0x82000580, 0x00000000, + 0x04000040, 0x59c82021, 0x4a03900d, 0x00000001, + 0x59c82821, 0x82142d00, 0x0000ffff, 0x59325808, + 0x812e59c0, 0x04000037, 0x59326809, 0x0201f800, + 0x001048d9, 0x02020800, 0x001092b6, 0x599c0019, + 0x8c00050c, 0x04020018, 0x0201f800, 0x001048d9, + 0x04020015, 0x59300811, 0x4807c857, 0x592c0408, + 0x8c00051c, 0x0402000e, 0x8400055c, 0x48025c08, + 0x592c0a04, 0x82040d00, 0x000000ff, 0x82040580, + 0x00000048, 0x04000004, 0x82040580, 0x00000018, + 0x04020003, 0x59300811, 0x48065803, 0x4a026011, + 0x7fffffff, 0x48166013, 0x0201f800, 0x001010dd, + 0x04020014, 0x0401f9fd, 0x40280000, 0x4802600d, + 0x04000005, 0x4832600b, 0x50200000, 0x4802600a, + 0x4822600c, 0x59300414, 0x8c00051c, 0x04020004, + 0x599c0019, 0x8c00050c, 0x0402086e, 0x4a03900d, + 0x00000040, 0x4a0370e5, 0x00000008, 0x1c01f000, + 0x59880052, 0x80000000, 0x48031052, 0x4a03900d, + 0x00000040, 0x42000000, 0xc0000000, 0x0401f71d, + 0x4cf80000, 0x58f40000, 0x8001f540, 0x0401f820, + 0x41781800, 0x0401f8e4, 0x04020014, 0x44140800, + 0x0401f82a, 0x04000011, 0x40043800, 0x42001800, + 0x00000001, 0x40142000, 0x0401f8db, 0x0402000b, + 0x801c3800, 0x501c0000, 0x44000800, 0x0401f810, + 0x801c0580, 0x04000004, 0x44103800, 0x801c3840, + 0x44143800, 0x0401f819, 0x5c01f000, 0x1c01f000, + 0x80f9f1c0, 0x04020003, 0x58f41202, 0x0401f003, + 0x42001000, 0x00000007, 0x1c01f000, 0x80f9f1c0, + 0x04020006, 0x58f40401, 0x82000480, 0x00000002, + 0x80f40400, 0x0401f005, 0x58f80401, 0x82000480, + 0x00000002, 0x80f80400, 0x50002800, 0x80000000, + 0x50002000, 0x1c01f000, 0x80f9f1c0, 0x04020008, + 0x58f40401, 0x82000480, 0x00000002, 0x02001800, + 0x001005d8, 0x4801ec01, 0x0401f00b, 0x58f80401, + 0x82000480, 0x00000002, 0x02001800, 0x001005d8, + 0x4801f401, 0x82000580, 0x00000002, 0x04020002, + 0x0401f809, 0x58f40202, 0x80000040, 0x4801ea02, + 0x02000800, 0x001005d8, 0x82000580, 0x00000001, + 0x1c01f000, 0x4d2c0000, 0x40fa5800, 0x0201f800, + 0x001007f4, 0x4979e800, 0x4179f000, 0x5c025800, + 0x1c01f000, 0x80f5e9c0, 0x04000009, 0x80f9f1c0, + 0x04020ff5, 0x4d2c0000, 0x40f65800, 0x0201f800, + 0x001007f4, 0x4179e800, 0x5c025800, 0x1c01f000, + 0x4cf40000, 0x59300807, 0x82040500, 0x00003100, + 0x04020032, 0x8c040d22, 0x04000032, 0x5930001f, + 0x8001ed40, 0x02000800, 0x001005d8, 0x82000580, + 0xffffffff, 0x04000029, 0x58f40201, 0x82000580, + 0x0000dcb3, 0x02020800, 0x001005d8, 0x58f40a02, + 0x82040500, 0x0000fffe, 0x04000003, 0x0401ff89, + 0x58f40a02, 0x82040480, 0x0000000f, 0x04021059, + 0x80040800, 0x4805ea02, 0x82040580, 0x00000008, + 0x0400005d, 0x82040480, 0x00000008, 0x0400100a, + 0x58f40000, 0x8001ed40, 0x02000800, 0x001005d8, + 0x58f40201, 0x82000580, 0x0000ddb9, 0x02020800, + 0x001005d8, 0x58f40401, 0x82000c00, 0x00000002, + 0x4805ec01, 0x80f40400, 0x59300812, 0x44040000, + 0x80000000, 0x45780000, 0x5c01e800, 0x1c01f000, + 0x42001000, 0x00000400, 0x59b800e4, 0x8c000524, + 0x04020023, 0x4a0370e4, 0x00030000, 0x40000000, + 0x59b800e4, 0x8c000524, 0x0402001b, 0x59300807, + 0x84040d62, 0x48066007, 0x4a0370e4, 0x00020000, + 0x4d2c0000, 0x0201f800, 0x001007d3, 0x04000025, + 0x492e601f, 0x4a025a01, 0x0000dcb3, 0x59300008, + 0x80001d40, 0x02000800, 0x001005d8, 0x580c080f, + 0x48065803, 0x59301811, 0x40040000, 0x800c0580, + 0x0402000d, 0x497a5a02, 0x4a025c01, 0x00000004, + 0x0401f011, 0x4a0370e4, 0x00020000, 0x40000000, + 0x40000000, 0x80081040, 0x02000800, 0x001005d8, + 0x0401f7d6, 0x4a025a02, 0x00000001, 0x4a025c01, + 0x00000006, 0x497a5804, 0x400c0000, 0x80040480, + 0x48025805, 0x412de800, 0x5c025800, 0x0401f7a9, + 0x5c025800, 0x4a02601f, 0xffffffff, 0x0401f7c3, + 0x4d2c0000, 0x58f65800, 0x0201f800, 0x001007f4, + 0x40f65800, 0x0201f800, 0x001007f4, 0x5c025800, + 0x0401f7f5, 0x4d2c0000, 0x0201f800, 0x001007d3, + 0x040007f8, 0x4a025a01, 0x0000ddb9, 0x4a025c01, + 0x00000002, 0x492de800, 0x412de800, 0x5c025800, + 0x0401f7a5, 0x0401ff33, 0x82f40400, 0x00000004, + 0x800c0400, 0x40000800, 0x50040000, 0x80100580, + 0x04000016, 0x82040c00, 0x00000002, 0x80081040, + 0x040207fa, 0x80f9f1c0, 0x04000011, 0x58f41202, + 0x82081480, 0x00000007, 0x82f80400, 0x00000002, + 0x800c0400, 0x40000800, 0x50040000, 0x80100580, + 0x04000006, 0x82040c00, 0x00000002, 0x80081040, + 0x040207fa, 0x0401f002, 0x1c01f000, 0x82000540, + 0x00000001, 0x0401f7fd, 0x4cf40000, 0x4cf80000, + 0x4001e800, 0x592c0a06, 0x800409c0, 0x0402001d, + 0x82f40580, 0xffffffff, 0x04000017, 0x58f40201, + 0x82000580, 0x0000dcb3, 0x02020800, 0x001005d8, + 0x58f40000, 0x8001f540, 0x04000006, 0x58f80201, + 0x82000580, 0x0000ddb9, 0x02020800, 0x001005d8, + 0x41783800, 0x0401f839, 0x04020006, 0x0401ff32, + 0x497a601f, 0x5c01f000, 0x5c01e800, 0x1c01f000, + 0x0401ff2d, 0x4a025a06, 0x00000011, 0x0401f7f9, + 0x82f40580, 0xffffffff, 0x04020f27, 0x0401f7f5, + 0x4cf40000, 0x4cf80000, 0x4001e800, 0x82040580, + 0x00000001, 0x0402001f, 0x82f40580, 0xffffffff, + 0x04000019, 0x58f40201, 0x82000580, 0x0000dcb3, + 0x02020800, 0x001005d8, 0x58f40000, 0x8001f540, + 0x04000006, 0x58f80201, 0x82000580, 0x0000ddb9, + 0x02020800, 0x001005d8, 0x41783800, 0x0401f813, + 0x04020008, 0x0401ff0c, 0x42000800, 0x00000001, + 0x497a601f, 0x5c01f000, 0x5c01e800, 0x1c01f000, + 0x0401ff05, 0x42000800, 0x00000011, 0x0401f7f9, + 0x4c040000, 0x82f40580, 0xffffffff, 0x04020efe, + 0x5c000800, 0x0401f7f3, 0x4803c856, 0x401c2000, + 0x41781800, 0x0401ff8c, 0x0402002c, 0x58f42003, + 0x42001800, 0x00000001, 0x0401ff87, 0x04020027, + 0x0401feb8, 0x40082800, 0x82f40400, 0x00000004, + 0x40003000, 0x50182000, 0x40100000, 0x801c0580, + 0x04000005, 0x42001800, 0x00000001, 0x0401ff7a, + 0x0402001a, 0x82183400, 0x00000002, 0x80142840, + 0x040207f5, 0x80f9f1c0, 0x04000013, 0x58f42a02, + 0x82142c80, 0x00000007, 0x82f80400, 0x00000003, + 0x40003000, 0x50182000, 0x40100000, 0x801c0580, + 0x04000005, 0x42001800, 0x00000001, 0x0401ff66, + 0x04020006, 0x82183400, 0x00000002, 0x80142840, + 0x040207f5, 0x1c01f000, 0x82000540, 0x00000001, + 0x0401f7fd, 0x0201f800, 0x001005d8, 0x58380207, + 0x8c000502, 0x040007fc, 0x50200000, 0x80387c00, + 0x583c2800, 0x583c2001, 0x58380404, 0x80001540, + 0x04020002, 0x58381407, 0x58c83401, 0x58380c08, + 0x59303807, 0x497a6012, 0x497a6013, 0x0201f000, + 0x000200be, 0x592c0408, 0x8c000502, 0x040007ea, + 0x592c0409, 0x80000540, 0x040007e7, 0x82000c80, + 0x00000002, 0x04001011, 0x58380001, 0x80007540, + 0x02000800, 0x001005d8, 0x58380204, 0x82000500, + 0x0000000f, 0x82000400, 0x001010bd, 0x50004000, + 0x40040000, 0x800409c0, 0x04000005, 0x82040c80, + 0x00000005, 0x040217f1, 0x80204400, 0x50200000, + 0x80387c00, 0x583c2800, 0x583c2001, 0x583c1002, + 0x592c0a07, 0x592c4c08, 0x592c300d, 0x59303807, + 0x497a6012, 0x497a6013, 0x4816600e, 0x4812600f, + 0x480a6010, 0x481a6011, 0x80040840, 0x4806600d, + 0x02000000, 0x000200c6, 0x80204000, 0x50201800, + 0x800c19c0, 0x0402000c, 0x58380001, 0x80007540, + 0x02000800, 0x001005d8, 0x58380204, 0x82000500, + 0x0000000f, 0x82000400, 0x001010bd, 0x50004000, + 0x50201800, 0x483a600b, 0x480e600a, 0x4822600c, + 0x0201f000, 0x000200c6, 0x4803c856, 0x592c0208, + 0x8c00051e, 0x04020017, 0x50200000, 0x80306c00, + 0x40240000, 0x0c01f001, 0x00100e46, 0x00100e46, + 0x00100e4f, 0x00100e46, 0x00100e46, 0x00100e46, + 0x00100e46, 0x00100e46, 0x00100e4f, 0x00100e46, + 0x00100e4f, 0x00100e46, 0x00100e46, 0x00100e4f, + 0x00100e46, 0x00100e46, 0x0201f800, 0x001005d8, + 0x8400051e, 0x48025a08, 0x50200000, 0x80306c00, + 0x58343801, 0x481e600f, 0x0401f007, 0x58341802, + 0x58342800, 0x58343801, 0x480e6010, 0x4816600e, + 0x481e600f, 0x0401f246, 0x4933c857, 0x5931f808, + 0x59300a06, 0x800409c0, 0x04000005, 0x80040906, + 0x04020002, 0x80040800, 0x4805fc06, 0x4a026206, + 0x00000002, 0x592c0409, 0x82000500, 0x00000008, + 0x0400000b, 0x0401f834, 0x59300203, 0x82000580, + 0x00000004, 0x04020005, 0x42027000, 0x00000048, + 0x0201f800, 0x000207a1, 0x1c01f000, 0x4cfc0000, + 0x58fc0204, 0x82000500, 0x000000ff, 0x82000580, + 0x00000048, 0x0402000c, 0x58fc000b, 0x800001c0, + 0x04000009, 0x58fc0407, 0x800001c0, 0x04000006, + 0x58fc080b, 0x8c040d16, 0x04000017, 0x58fc0007, + 0x0401f00a, 0x58fc0408, 0x8c000512, 0x04020014, + 0x58fc0c09, 0x8c040d16, 0x04020003, 0x5c01f800, + 0x1c01f000, 0x58fc000a, 0x59300811, 0x80040580, + 0x04020009, 0x59300007, 0x84000500, 0x48026007, + 0x42027000, 0x00000048, 0x5c01f800, 0x0201f000, + 0x000207a1, 0x5c01f800, 0x1c01f000, 0x58fdf809, + 0x0401f7ec, 0x4933c857, 0x59b808ea, 0x82040d00, + 0x00000007, 0x82040580, 0x00000000, 0x0400001e, + 0x82040580, 0x00000003, 0x0400001b, 0x59300406, + 0x4c000000, 0x4a026406, 0x00000000, 0x42003000, + 0x00000041, 0x42000000, 0x50000000, 0x41300800, + 0x4c180000, 0x0401fce7, 0x5c003000, 0x0400000b, + 0x42000000, 0x0000001e, 0x80000040, 0x040207ff, + 0x80183040, 0x040207f4, 0x42000000, 0x40000000, + 0x41300800, 0x0401fcdb, 0x5c000000, 0x48026406, + 0x1c01f000, 0x59300007, 0x84000500, 0x48026007, + 0x0401f7fc, 0x59c00007, 0x4a038006, 0x30000000, + 0x40000000, 0x59c00007, 0x8c00050a, 0x040207fe, + 0x1c01f000, 0x5c000000, 0x4c000000, 0x4803c857, + 0x4dc00000, 0x4a0370e8, 0x00000000, 0x42038000, + 0x00007720, 0x0401fff0, 0x42038000, 0x00007700, + 0x0401ffed, 0x0201f800, 0x0010513b, 0x04020013, + 0x4a038891, 0x0000ffff, 0x497b8880, 0x497b8892, + 0x42001000, 0x00000190, 0x40000000, 0x40000000, + 0x80081040, 0x040207fd, 0x42000000, 0x0010b8a6, + 0x0201f800, 0x0010aa47, 0x0401f80e, 0x5c038000, + 0x0201f000, 0x00105258, 0x0401f82d, 0x42000000, + 0x0010b8a7, 0x0201f800, 0x0010aa47, 0x0401f805, + 0x48178892, 0x480b8880, 0x5c038000, 0x1c01f000, + 0x496fc857, 0x836c0580, 0x00000003, 0x0402000b, + 0x4c080000, 0x4c0c0000, 0x42001000, 0x00008048, + 0x42001800, 0x0000ffff, 0x0201f800, 0x00103a3e, + 0x5c001800, 0x5c001000, 0x42000800, 0x0000003c, + 0x0201f800, 0x00101345, 0x59a8006c, 0x80000540, + 0x04000006, 0x59a8106d, 0x800811c0, 0x04000003, + 0x0201f800, 0x00101aaf, 0x4a038891, 0x0000ffff, + 0x4a03900d, 0x00000040, 0x0201f800, 0x0010098e, + 0x4a0370e8, 0x00000001, 0x1c01f000, 0x5c000000, + 0x4c000000, 0x4803c857, 0x59c41080, 0x497b8880, + 0x59c42892, 0x497b8892, 0x0201f800, 0x0010513b, + 0x04020002, 0x1c01f000, 0x42002000, 0x00000260, + 0x59c418a4, 0x820c1d00, 0x0000000f, 0x820c0580, + 0x00000000, 0x04000010, 0x59c41805, 0x820c1d00, + 0x00000001, 0x0402000e, 0x59c418a4, 0x820c1d00, + 0x0000000f, 0x820c0480, 0x00000007, 0x04001004, + 0x820c0480, 0x0000000c, 0x04001003, 0x80102040, + 0x040207ec, 0x497b8891, 0x1c01f000, 0x4c100000, + 0x42002000, 0x00000019, 0x46000000, 0x00000001, + 0x0201f800, 0x00101937, 0x50001800, 0x820c1d00, + 0x00000001, 0x04000005, 0x80102040, 0x040207f7, + 0x5c002000, 0x0401f7f0, 0x5c002000, 0x0401f7ec, + 0x4803c856, 0x1c01f000, 0x4d2c0000, 0x59325808, + 0x592c0a04, 0x4807c857, 0x82040d00, 0x000000ff, + 0x82040500, 0x0000000f, 0x0c01f001, 0x00100f67, + 0x00100f67, 0x00100f67, 0x00100f7f, 0x00100f67, + 0x00100f67, 0x00100f67, 0x00100f67, 0x00100f67, + 0x00100f7f, 0x00100f67, 0x00100f69, 0x00100f67, + 0x00100f67, 0x00100f67, 0x00100f67, 0x0201f800, + 0x001005d8, 0x82040580, 0x0000003b, 0x02020800, + 0x001005d8, 0x592c020a, 0x8c000500, 0x0400005f, + 0x592c1a07, 0x82040500, 0x0000000f, 0x82000400, + 0x001010bd, 0x50001000, 0x50080000, 0x59302013, + 0x4802600a, 0x492e600b, 0x480a600c, 0x480e600d, + 0x48126012, 0x5c025800, 0x1c01f000, 0x82040500, + 0x0000000f, 0x82000400, 0x001010bd, 0x50001000, + 0x50080000, 0x592c1a07, 0x4802600a, 0x492e600b, + 0x480a600c, 0x480e600d, 0x497a6012, 0x0401f7f2, + 0x8c040d00, 0x04020041, 0x82040d00, 0x00000080, + 0x0400003e, 0x0201f000, 0x000200cf, 0x59300013, + 0x59301012, 0x80080580, 0x0402000c, 0x42007800, + 0x80000005, 0x592c1208, 0x82080500, 0xffff7fff, + 0x48025a08, 0x8c08151e, 0x0402002d, 0x823c7d40, + 0x00000020, 0x0401f02a, 0x480bc857, 0x42000000, + 0x0010b851, 0x0201f800, 0x0010aa47, 0x59300414, + 0x4803c857, 0x8c000514, 0x04020007, 0x599c1819, + 0x8c0c1d12, 0x04020004, 0x820c1d40, 0x00000001, + 0x0401f01d, 0x59302013, 0x0401f92b, 0x0402001a, + 0x42007800, 0x80000005, 0x5930500d, 0x592c0208, + 0x4803c857, 0x8c00051e, 0x04020005, 0x823c7d40, + 0x00000020, 0x5930400c, 0x0401f004, 0x8400051e, + 0x48025a08, 0x0401f8da, 0x50201800, 0x480e600a, + 0x4832600b, 0x4822600c, 0x482a600d, 0x480fc857, + 0x4833c857, 0x4823c857, 0x482bc857, 0x80000580, + 0x483e6004, 0x1c01f000, 0x0201f800, 0x001005d8, + 0x4933c857, 0x4d2c0000, 0x59900004, 0x81300580, + 0x02020800, 0x001005d8, 0x0201f800, 0x00109037, + 0x02000800, 0x001005d8, 0x59325808, 0x4d3c0000, + 0x4d400000, 0x59300004, 0x4803c857, 0x4c000000, + 0x0201f800, 0x00106dc3, 0x0201f800, 0x00106b8a, + 0x5c000000, 0x8c000516, 0x04000010, 0x592c000f, + 0x4803c857, 0x48025807, 0x41780800, 0x42028000, + 0x00000002, 0x0201f800, 0x00104e70, 0x4a025c06, + 0x0000ffff, 0x0201f800, 0x000202da, 0x0201f800, + 0x00107911, 0x0401f015, 0x4a026203, 0x00000002, + 0x592c0208, 0x8400054e, 0x48025a08, 0x59300406, + 0x82000580, 0x00000006, 0x04020009, 0x811800ca, + 0x81c80c00, 0x58040939, 0x592c000d, 0x80040480, + 0x592c080f, 0x80040480, 0x4802580b, 0x417a7800, + 0x0201f800, 0x00108be3, 0x5c028000, 0x5c027800, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x4d2c0000, + 0x59900004, 0x81300580, 0x02020800, 0x001005d8, + 0x0201f800, 0x00109037, 0x02000800, 0x001005d8, + 0x59325808, 0x592c0208, 0x84000540, 0x48025a08, + 0x0401f7bf, 0x491bc857, 0x49d3c857, 0x4dd00000, + 0x41780800, 0x8007a0ca, 0x83d3a400, 0x00007600, + 0x4a03a005, 0x80000002, 0x42000000, 0x00001000, + 0x50000000, 0x82000480, 0x24220001, 0x04020029, + 0x59d01006, 0x82080500, 0x00006000, 0x82000580, + 0x00006000, 0x0400002f, 0x82080500, 0x40008000, + 0x040007f8, 0x800409c0, 0x0402002a, 0x811a31c0, + 0x04000028, 0x42000000, 0x00001002, 0x50001000, + 0x46000000, 0x00000512, 0x42001800, 0x0000000a, + 0x59e00000, 0x8c00051a, 0x040207fc, 0x800c1840, + 0x040207fc, 0x42000000, 0x00001002, 0x46000000, + 0x00000514, 0x42001800, 0x0000000a, 0x59e00000, + 0x8c00053a, 0x040207fc, 0x800c1840, 0x040207fc, + 0x42000000, 0x00001002, 0x44080000, 0x0401f00d, + 0x59d01006, 0x82080500, 0x00006000, 0x82000580, + 0x00006000, 0x04000007, 0x8c08151e, 0x040007f9, + 0x59d01006, 0x82080500, 0x00006000, 0x040207f5, + 0x83d3a400, 0x00000020, 0x80040800, 0x82040480, + 0x00000005, 0x040017bf, 0x5c03a000, 0x1c01f000, + 0x491bc857, 0x49d3c857, 0x4dd00000, 0x41780800, + 0x8007a0ca, 0x83d3a400, 0x00007600, 0x4a03a005, + 0x80000001, 0x59d00006, 0x83d3a400, 0x00000020, + 0x80040800, 0x82040480, 0x00000005, 0x040017f8, + 0x5c03a000, 0x1c01f000, 0x59d00006, 0x8c00053e, + 0x0400001e, 0x59902804, 0x4817c857, 0x801429c0, + 0x04000013, 0x5990000a, 0x5990080b, 0x5990100c, + 0x5990180d, 0x4800280a, 0x4804280b, 0x4808280c, + 0x480c280d, 0x59d00000, 0x59d00801, 0x59d01002, + 0x59d01803, 0x59d02004, 0x4800280e, 0x4804280f, + 0x48082810, 0x480c2811, 0x48102812, 0x59900006, + 0x82000500, 0xffff0000, 0x48032006, 0x4a03a005, + 0x30000000, 0x59d00006, 0x1c01f000, 0x4803c856, + 0x80204000, 0x50200000, 0x80000540, 0x04000003, + 0x80285040, 0x1c01f000, 0x58300001, 0x80000540, + 0x0400000e, 0x4802600b, 0x40006000, 0x58300204, + 0x82000500, 0x0000000f, 0x82000400, 0x001010bd, + 0x50004000, 0x802041c0, 0x02000800, 0x001005d8, + 0x80285040, 0x1c01f000, 0x40005000, 0x1c01f000, + 0x00000005, 0x00000008, 0x0000000b, 0x0000000e, + 0x00000011, 0x00000000, 0x00000000, 0x0000000b, + 0x00000000, 0x00000000, 0x00000000, 0x001010b8, + 0x001010b7, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x001010b8, 0x001010b7, 0x001010b4, + 0x001010b8, 0x001010b7, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x001010b8, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x001010b8, 0x001010b8, 0x001010b8, + 0x00000000, 0x001010b8, 0x00000000, 0x00000000, + 0x00000000, 0x4813c857, 0x492fc857, 0x4933c857, + 0x48126012, 0x592c5207, 0x802851c0, 0x0400004a, + 0x412c6000, 0x0401f84b, 0x04000009, 0x82240580, + 0x00000002, 0x04020003, 0x5830000d, 0x80102480, + 0x50200000, 0x80004540, 0x0400003f, 0x50200000, + 0x80000540, 0x0400000b, 0x80301400, 0x58080002, + 0x80102480, 0x0400101e, 0x801021c0, 0x04000009, + 0x80285040, 0x04000034, 0x80204000, 0x0401f7f4, + 0x58300001, 0x80006540, 0x0400002f, 0x0401f7e6, + 0x80285040, 0x0400002c, 0x80204000, 0x50200000, + 0x80000540, 0x0402000a, 0x58300001, 0x80006540, + 0x04000025, 0x58300204, 0x82004d00, 0x0000000f, + 0x82244400, 0x001010bd, 0x50204000, 0x592c0208, + 0x8400051e, 0x48025a08, 0x0401f013, 0x80102080, + 0x80102000, 0x48126010, 0x4813c857, 0x58080802, + 0x40100000, 0x80042480, 0x02001800, 0x001005d8, + 0x58080000, 0x58081801, 0x80102400, 0x4812600e, + 0x480e600f, 0x4813c857, 0x592c0208, 0x8400055e, + 0x48025a08, 0x4833c857, 0x4823c857, 0x482bc857, + 0x4832600b, 0x4822600c, 0x482a600d, 0x80000580, + 0x0401f003, 0x82000540, 0x00000001, 0x1c01f000, + 0x58300204, 0x82004d00, 0x0000000f, 0x82244400, + 0x001010bd, 0x82000500, 0x000000ff, 0x82000580, + 0x00000029, 0x0402001b, 0x50204000, 0x592c0409, + 0x80000540, 0x02000800, 0x001005d8, 0x82000c80, + 0x00000002, 0x04001011, 0x58300001, 0x80006540, + 0x02000800, 0x001005d8, 0x58300204, 0x82000500, + 0x0000000f, 0x82000400, 0x001010bd, 0x50004000, + 0x40040000, 0x800409c0, 0x04000006, 0x82040c80, + 0x00000005, 0x040217f1, 0x80204400, 0x80000580, + 0x1c01f000, 0x59e00004, 0x8c00050e, 0x02020000, + 0x00100903, 0x1c01f000, 0x4c5c0000, 0x59e4b800, + 0x485fc857, 0x825c0500, 0x0000001f, 0x04000004, + 0x59e40862, 0x0201f800, 0x001005d8, 0x825c0500, + 0x000000e0, 0x02000800, 0x001005d8, 0x8c5cbd0e, + 0x04020807, 0x8c5cbd0c, 0x04020809, 0x8c5cbd0a, + 0x04020878, 0x5c00b800, 0x1c01f000, 0x4803c856, + 0x4a03c800, 0x00000080, 0x1c01f000, 0x4d2c0000, + 0x42007800, 0x0010b8ec, 0x583c0001, 0x583c0802, + 0x80040540, 0x0400003f, 0x42000800, 0x0010b7f7, + 0x50065800, 0x592c0002, 0x82000580, 0x00000000, + 0x0400000e, 0x59e40850, 0x59e41853, 0x400c0000, + 0x80040400, 0x59e40852, 0x4807c857, 0x80041480, + 0x04021008, 0x40001000, 0x480bc857, 0x4a007800, + 0x00000001, 0x0401f006, 0x4803c857, 0x0401f029, + 0x59e41050, 0x480bc857, 0x49787800, 0x480bc857, + 0x480fc857, 0x592c0003, 0x80000540, 0x04000006, + 0x80080580, 0x04020004, 0x592c0003, 0x4803c857, + 0x480bc857, 0x480a5803, 0x592c0007, 0x800001c0, + 0x04000007, 0x592c1007, 0x480bc857, 0x583c0003, + 0x4803c857, 0x80080480, 0x04001003, 0x583c1001, + 0x480bc857, 0x583c0802, 0x480bc857, 0x4807c857, + 0x4a025801, 0x00000000, 0x4a025809, 0x001011bc, + 0x480a5807, 0x48065808, 0x59e40053, 0x48025804, + 0x412c1000, 0x492fc857, 0x0201f800, 0x00100858, + 0x5c025800, 0x4a03c800, 0x00000040, 0x1c01f000, + 0x42007800, 0x0010b7f7, 0x503c7800, 0x4a007802, + 0x00000100, 0x42007800, 0x0010b8ec, 0x583c0000, + 0x4803c857, 0x82000d80, 0x00000001, 0x04000004, + 0x80000000, 0x48007800, 0x0401f019, 0x49787800, + 0x583c1806, 0x583c0005, 0x800c1800, 0x480c7806, + 0x800c0580, 0x04020002, 0x49787806, 0x583c0807, + 0x800409c0, 0x0400000e, 0x583c0008, 0x80000000, + 0x48007808, 0x80040580, 0x04020009, 0x49787808, + 0x583c2006, 0x42001800, 0x00000001, 0x42001000, + 0x00008028, 0x0201f800, 0x00103a3e, 0x1c01f000, + 0x4a03c800, 0x00000020, 0x0201f800, 0x0010aa40, + 0x59e40000, 0x1c01f000, 0x4d2c0000, 0x4a007001, + 0x00000000, 0x82040d00, 0x43000f80, 0x02020800, + 0x001005d8, 0x58380009, 0x4803c00f, 0x0201f800, + 0x00109402, 0x583a5808, 0x592c0000, 0x48007008, + 0x800001c0, 0x04020002, 0x49787007, 0x0201f800, + 0x001007f4, 0x5c025800, 0x0201f000, 0x0010087d, + 0x4803c856, 0x4c3c0000, 0x4d2c0000, 0x4d300000, + 0x5830000a, 0x80025d40, 0x02000800, 0x001005d8, + 0x592e6008, 0x4c300000, 0x0201f800, 0x0010941a, + 0x5c006000, 0x02000800, 0x001005d8, 0x58300002, + 0x82000580, 0x00000100, 0x04020010, 0x5930780b, + 0x583c0001, 0x80000540, 0x0400000e, 0x4802600b, + 0x40007800, 0x82000400, 0x00000002, 0x48006003, + 0x583c0000, 0x48006004, 0x40301000, 0x0201f800, + 0x00100858, 0x0401f00c, 0x4a025a06, 0x00000002, + 0x4c300000, 0x0201f800, 0x000202da, 0x5c006000, + 0x40325800, 0x0201f800, 0x001007f4, 0x0201f800, + 0x0002077d, 0x5c026000, 0x5c025800, 0x5c007800, + 0x1c01f000, 0x4803c856, 0x4d2c0000, 0x4d300000, + 0x42007000, 0x0010b7f8, 0x58380801, 0x82040580, + 0x00000002, 0x04020011, 0x58386002, 0x5830000a, + 0x812c0580, 0x0402000d, 0x59e00004, 0x8c00050e, + 0x040007fe, 0x59dc0006, 0x4803c857, 0x4a03b805, + 0x20000000, 0x8c00053e, 0x040007f8, 0x4a007001, + 0x00000000, 0x0401f019, 0x58386006, 0x40305000, + 0x803061c0, 0x02000800, 0x001005d8, 0x5830000a, + 0x812c0580, 0x04000004, 0x40305000, 0x58306000, + 0x0401f7f8, 0x40280000, 0x80300580, 0x58300000, + 0x04000006, 0x48005000, 0x800001c0, 0x04020007, + 0x48287005, 0x0401f005, 0x800001c0, 0x04020002, + 0x48007005, 0x48007006, 0x40325800, 0x0201f800, + 0x001007f4, 0x42007000, 0x0010b7f8, 0x58380001, + 0x82000580, 0x00000000, 0x02000800, 0x0010087d, + 0x5c026000, 0x5c025800, 0x1c01f000, 0x4803c856, + 0x42000800, 0x0000003c, 0x48079000, 0x59c80000, + 0x80040500, 0x040207fe, 0x497b9005, 0x4a039035, + 0x00880200, 0x59a8000e, 0x800000e0, 0x4803900e, + 0x4a039011, 0x00000024, 0x4a03900f, 0x0010d1c0, + 0x4a039010, 0x0010d1c0, 0x4a039015, 0x0000007f, + 0x4a03900d, 0x00000040, 0x4a039000, 0x00001600, + 0x1c01f000, 0x59c80007, 0x8c000508, 0x040208b7, + 0x59c80800, 0x8c040d16, 0x04020004, 0x82000500, + 0x00000006, 0x0c01f005, 0x4807c857, 0x82000500, + 0x0000000e, 0x0c01f001, 0x001012a8, 0x001012a6, + 0x00105999, 0x001012a6, 0x001012aa, 0x001012a6, + 0x001012aa, 0x001012aa, 0x001012a6, 0x001012a6, + 0x001012a6, 0x001012a6, 0x001012aa, 0x001012a6, + 0x001012aa, 0x001012a6, 0x0201f800, 0x001005d8, + 0x4803c857, 0x1c01f000, 0x59c8080c, 0x4807c857, + 0x82040500, 0x00006000, 0x04000004, 0x0201f800, + 0x0010aa03, 0x0401f006, 0x82040500, 0x007f0000, + 0x04000006, 0x0201f800, 0x0010a9d5, 0x0201f800, + 0x00106eb3, 0x0401f02b, 0x82040500, 0x00000014, + 0x04000014, 0x0201f800, 0x0010aa32, 0x836c0580, + 0x00000003, 0x0400000d, 0x0201f800, 0x0010513b, + 0x04000004, 0x0201f800, 0x0010411d, 0x0401f007, + 0x4a035033, 0x00000001, 0x4202d800, 0x00000001, + 0x0201f800, 0x001050a2, 0x0401f817, 0x0401f015, + 0x82040500, 0x00001c00, 0x04000005, 0x0201f800, + 0x0010aa11, 0x0401f810, 0x0401f00e, 0x82040500, + 0x00000140, 0x04000005, 0x0201f800, 0x0010aa24, + 0x0401f809, 0x0401f007, 0x82040500, 0x00008000, + 0x04000004, 0x0201f800, 0x0010a9fc, 0x0401f802, + 0x1c01f000, 0x4c0c0000, 0x4c100000, 0x4c140000, + 0x0201f800, 0x00100ec9, 0x5c002800, 0x5c002000, + 0x5c001800, 0x1c01f000, 0x4803c856, 0x59a80804, + 0x59a8002b, 0x82000500, 0xfffff000, 0x80040540, + 0x4803502b, 0x59a8002f, 0x82000500, 0xfffff000, + 0x80040540, 0x4803502f, 0x48078882, 0x82041c00, + 0x0000000f, 0x800c1908, 0x820c1c00, 0x00000004, + 0x400c2000, 0x901029c0, 0x82040480, 0x000001e4, + 0x04021005, 0x42001000, 0x00000008, 0x801020c6, + 0x0401f031, 0x82040480, 0x00000230, 0x04021009, + 0x42001000, 0x00000007, 0x801000c2, 0x800000c2, + 0x80100400, 0x80100400, 0x80102400, 0x0401f026, + 0x82040480, 0x00000298, 0x04021008, 0x42001000, + 0x00000006, 0x801000c2, 0x800000c2, 0x80100400, + 0x80102400, 0x0401f01c, 0x82040480, 0x00000328, + 0x04021007, 0x42001000, 0x00000005, 0x801000c2, + 0x800000c2, 0x80102400, 0x0401f013, 0x82040480, + 0x00000404, 0x04021005, 0x42001000, 0x00000004, + 0x801020c4, 0x0401f00c, 0x82040480, 0x0000056c, + 0x04021006, 0x42001000, 0x00000003, 0x801000c2, + 0x80102400, 0x0401f004, 0x42001000, 0x00000002, + 0x801020c2, 0x82100480, 0x00000110, 0x80000080, + 0x80002000, 0x800800d0, 0x80140540, 0x80100540, + 0x48039035, 0x1c01f000, 0x59c80815, 0x0201f800, + 0x001005d0, 0x82040d00, 0x0000007c, 0x48079000, + 0x59c80000, 0x80040500, 0x040207fe, 0x8c040d04, + 0x04000003, 0x59c80035, 0x48039035, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x1c01f000, + 0x4803c856, 0x497b88a9, 0x4a038807, 0x00000001, + 0x497b8807, 0x59c40005, 0x48038805, 0x0201f800, + 0x00101815, 0x4201d000, 0x000001f4, 0x0201f800, + 0x0010608e, 0x497b880e, 0x4200b000, 0x000001f4, + 0x42000000, 0x00000001, 0x42000800, 0x00000014, + 0x0201f800, 0x00101944, 0x42000800, 0x00000014, + 0x0201f800, 0x0010193f, 0x8c040d00, 0x04000005, + 0x8058b040, 0x040207f3, 0x0201f800, 0x001005d8, + 0x4200b000, 0x00000032, 0x42000000, 0x00000001, + 0x42000800, 0x000000b4, 0x0201f800, 0x00101944, + 0x42000800, 0x000000b4, 0x0201f800, 0x0010193f, + 0x8c040d00, 0x04000005, 0x8058b040, 0x040207f3, + 0x0201f800, 0x001005d8, 0x59c40005, 0x48038805, + 0x42000000, 0x00000089, 0x800008d0, 0x48075054, + 0x48075055, 0x48075056, 0x42000800, 0x000000e0, + 0x0201f800, 0x00101944, 0x42000800, 0x000000f4, + 0x0201f800, 0x0010193f, 0x82040500, 0xffffffd1, + 0x82000540, 0x00000002, 0x42000800, 0x000000f4, + 0x0201f800, 0x00101944, 0x42000800, 0x000000a0, + 0x0201f800, 0x0010193f, 0x82040540, 0x00000001, + 0x42000800, 0x000000a0, 0x0201f800, 0x00101944, + 0x42000800, 0x00000000, 0x0201f800, 0x0010193f, + 0x82040540, 0x00000001, 0x42000800, 0x00000000, + 0x0201f800, 0x00101944, 0x4201d000, 0x0001d4c0, + 0x0201f800, 0x0010608e, 0x0401fa2b, 0x4a0388a7, + 0x0000f7f7, 0x4a0388a3, 0x8000403c, 0x4a0388ae, + 0x000061a8, 0x4a038801, 0x00032063, 0x4a038810, + 0x00410108, 0x4a038811, 0x00520608, 0x4a038812, + 0x00450320, 0x4a038813, 0x00440405, 0x4a03881c, + 0x004132e1, 0x4a038850, 0x80000108, 0x4a038860, + 0x00000008, 0x4a038870, 0x00000008, 0x4a038851, + 0x80000508, 0x4a038861, 0x00800000, 0x4a038871, + 0x00800000, 0x4a038852, 0x80000708, 0x4a038862, + 0x00800000, 0x4a038872, 0x00800000, 0x4a038853, + 0x80000608, 0x497b8863, 0x4a038873, 0x00800000, + 0x4a038882, 0x00000840, 0x4a0388a5, 0x0000001e, + 0x4a0388a6, 0x0000001e, 0x4a0388b0, 0x00007530, + 0x4a038802, 0x0000ffff, 0x4a038806, 0xc0e00800, + 0x1c01f000, 0x497b5022, 0x4a035021, 0x00000001, + 0x42000800, 0x00000040, 0x0201f800, 0x0010193f, + 0x82040500, 0xffffffaf, 0x82000540, 0x00000000, + 0x42000800, 0x00000040, 0x0201f800, 0x00101944, + 0x42000800, 0x000000f4, 0x0201f800, 0x0010193f, + 0x4c040000, 0x40040000, 0x84000548, 0x42000800, + 0x000000f4, 0x0201f800, 0x00101944, 0x42000800, + 0x00000000, 0x0201f800, 0x0010193f, 0x82040500, + 0xffffffc1, 0x82000540, 0x00000038, 0x42000800, + 0x00000000, 0x0201f800, 0x00101944, 0x5c000000, + 0x42000800, 0x000000f4, 0x0201f000, 0x00101944, + 0x59c40805, 0x4807c857, 0x59c40006, 0x80040d00, + 0x02000800, 0x001005d8, 0x82040500, 0x00e00800, + 0x04020004, 0x8c040d3e, 0x040208c4, 0x0401f007, + 0x82040500, 0x00800800, 0x02020800, 0x001005d0, + 0x0201f800, 0x001005d8, 0x4c5c0000, 0x4c600000, + 0x59c4b805, 0x485fc857, 0x59c40006, 0x8c000500, + 0x04000003, 0x8c5cbd00, 0x04020079, 0x0201f800, + 0x0010513b, 0x04000014, 0x59c40005, 0x82000500, + 0x000000c0, 0x04000036, 0x0201f800, 0x00105151, + 0x04020033, 0x4a038805, 0x04000000, 0x59c400a3, + 0x82000500, 0xbf203fff, 0x480388a3, 0x497b5049, + 0x4a038805, 0x000000c0, 0x0201f800, 0x00105065, + 0x0401f063, 0x8c5cbd34, 0x04020025, 0x59c40005, + 0x8c00050c, 0x04020012, 0x8c00050e, 0x04020013, + 0x8c00050a, 0x04020014, 0x8c000508, 0x0400000b, + 0x59a80017, 0x82000580, 0x00000009, 0x04020007, + 0x42000000, 0x0010b844, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00105318, 0x0401f04b, 0x4a035033, + 0x00000000, 0x0401f00b, 0x4a035033, 0x00000002, + 0x0401f008, 0x42000000, 0x0010b846, 0x0201f800, + 0x0010aa47, 0x0201f800, 0x001052c2, 0x0401f03e, + 0x0201f800, 0x00105378, 0x0401f03b, 0x8c5cbd34, + 0x04000037, 0x59c40005, 0x8c00053a, 0x04020005, + 0x42000000, 0x0010b818, 0x0201f800, 0x0010aa47, + 0x4a038805, 0x02000000, 0x0201f800, 0x0010513b, + 0x04020010, 0x4a038805, 0x04000000, 0x0201f800, + 0x00105149, 0x04020008, 0x4a035033, 0x00000001, + 0x4202d800, 0x00000001, 0x0201f800, 0x001050a2, + 0x0401f05b, 0x41780000, 0x0201f800, 0x00105113, + 0x0201f800, 0x001019fe, 0x4000c000, 0x0201f800, + 0x00101963, 0x836c1580, 0x00000004, 0x0402000d, + 0x8c5cbd00, 0x04020012, 0x59a81005, 0x8c081506, + 0x04020005, 0x59c410a3, 0x82081540, 0x00000008, + 0x480b88a3, 0x59c41006, 0x84081540, 0x480b8806, + 0x4a038805, 0x04000000, 0x4202d800, 0x00000001, + 0x497b5014, 0x0201f800, 0x00103b38, 0x8c5cbd3c, + 0x04020858, 0x8c5cbd00, 0x04000036, 0x42000000, + 0x0010b8ca, 0x0201f800, 0x0010aa47, 0x4a038805, + 0x00000001, 0x4200b000, 0x000003e8, 0x4201d000, + 0x00000064, 0x4c580000, 0x0201f800, 0x0010608e, + 0x0201f800, 0x001018d3, 0x5c00b000, 0x04000004, + 0x8058b040, 0x040207f6, 0x0401f004, 0x4a038805, + 0x00000001, 0x0401f01f, 0x59c40006, 0x84000500, + 0x48038806, 0x0201f800, 0x00106ede, 0x497b8880, + 0x0201f800, 0x0010a9c0, 0x59c4000d, 0x8c000500, + 0x02020800, 0x0010a9ce, 0x59c400a3, 0x82000500, + 0xfcf8ffff, 0x480388a3, 0x4a03504c, 0x00000002, + 0x4202d800, 0x00000004, 0x4a038805, 0x00000001, + 0x0201f800, 0x001006d4, 0x0401fb3b, 0x497b5052, + 0x4a035049, 0x00000001, 0x0201f800, 0x00100452, + 0x825cbd00, 0xbbfffffe, 0x485f8805, 0x5c00c000, + 0x5c00b800, 0x1c01f000, 0x59c41004, 0x480bc857, + 0x8c081500, 0x04000006, 0x4803c856, 0x497b2807, + 0x0201f800, 0x00106fa4, 0x0401f00a, 0x82080500, + 0x000001f0, 0x04000007, 0x4803c856, 0x417a3000, + 0x0201f800, 0x00106062, 0x0201f800, 0x00106fc6, + 0x4a038805, 0x80000000, 0x1c01f000, 0x59c408a3, + 0x4807c857, 0x84040d40, 0x480788a3, 0x1c01f000, + 0x4d900000, 0x4dd00000, 0x4da40000, 0x4d140000, + 0x4a038805, 0x40000000, 0x42000000, 0x0010b8c6, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x00106c55, + 0x59c41004, 0x8c081500, 0x04000054, 0x598e600d, + 0x497b2807, 0x813261c0, 0x04000032, 0x59300403, + 0x82000580, 0x00000032, 0x0402002e, 0x5930001c, + 0x48038833, 0x4a038807, 0x00018000, 0x4201d000, + 0x00000002, 0x0201f800, 0x0010608e, 0x497b8807, + 0x4201d000, 0x00000002, 0x0201f800, 0x0010608e, + 0x0201f800, 0x00106e21, 0x4201d000, 0x00007530, + 0x0201f800, 0x0010608e, 0x59c408a4, 0x82040d00, + 0x0000000f, 0x82040d80, 0x00000000, 0x04000005, + 0x42000000, 0x00200000, 0x0201f800, 0x00101949, + 0x0201f800, 0x00106bbf, 0x59300008, 0x80000540, + 0x02000800, 0x001005d8, 0x40025800, 0x4a025a04, + 0x00000103, 0x5931d821, 0x58ef400b, 0x58ec0009, + 0x0801f800, 0x0201f800, 0x0002077d, 0x0401f047, + 0x598c000f, 0x82001c80, 0x000000c8, 0x0402100f, + 0x80000000, 0x4803180f, 0x59c400a4, 0x82000500, + 0x0000000f, 0x82000580, 0x00000002, 0x04020004, + 0x42000000, 0x00200000, 0x0401fbf7, 0x0201f800, + 0x0010604d, 0x0401f035, 0x4933c857, 0x0201f800, + 0x00106e21, 0x813261c0, 0x04000030, 0x4a026203, + 0x00000001, 0x42027000, 0x00000027, 0x0201f800, + 0x000207a1, 0x0401f029, 0x8c081508, 0x04000027, + 0x417a3000, 0x0201f800, 0x001070d8, 0x42032000, + 0x0000bf32, 0x0201f800, 0x00106062, 0x59926004, + 0x813261c0, 0x04000012, 0x42001800, 0x000000c8, + 0x0201f800, 0x001070a4, 0x0402000d, 0x59c400a4, + 0x82000500, 0x0000000f, 0x82000580, 0x00000002, + 0x04020004, 0x42000000, 0x00200000, 0x0401fbce, + 0x0201f800, 0x00106052, 0x0401f00c, 0x4933c857, + 0x0201f800, 0x00106dc3, 0x813261c0, 0x04000007, + 0x42027000, 0x0000004f, 0x4a026203, 0x00000003, + 0x0201f800, 0x000207a1, 0x5c022800, 0x5c034800, + 0x5c03a000, 0x5c032000, 0x0201f000, 0x00106c4b, + 0x4803c857, 0x59a80821, 0x48035021, 0x80041580, + 0x04000045, 0x800409c0, 0x04000023, 0x497b504c, + 0x42000000, 0x0010b80d, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x0010aaf9, 0x42001000, 0x00008011, + 0x59c40001, 0x82000500, 0x00018000, 0x82001d80, + 0x00000000, 0x04000009, 0x82001d80, 0x00008000, + 0x04000009, 0x82001d80, 0x00010000, 0x04000009, + 0x0201f800, 0x001005d8, 0x42001800, 0x00000000, + 0x0401f006, 0x42001800, 0x00000001, 0x0401f003, + 0x42001800, 0x00000003, 0x0201f800, 0x00103a3e, + 0x0401f021, 0x59a8084c, 0x800409c0, 0x04020007, + 0x59c4000d, 0x8c000520, 0x04000004, 0x42001800, + 0x00000003, 0x0401f002, 0x40041800, 0x0201f800, + 0x0010aadd, 0x42001000, 0x00008012, 0x0201f800, + 0x00103a3e, 0x0201f800, 0x001006d4, 0x0201f800, + 0x0010ab33, 0x0402000c, 0x0401f853, 0x4d400000, + 0x4d3c0000, 0x42028000, 0x00000028, 0x42027800, + 0x00000408, 0x0201f800, 0x00101fe5, 0x5c027800, + 0x5c028000, 0x1c01f000, 0x4803c857, 0x82000400, + 0x0010210e, 0x50000800, 0x82040d00, 0x000000ff, + 0x1c01f000, 0x4803c856, 0x4c580000, 0x4200b000, + 0x00000010, 0x497b88ac, 0x497b88ad, 0x8058b040, + 0x040207fe, 0x5c00b000, 0x1c01f000, 0x4807c857, + 0x48075010, 0x80041108, 0x4200b000, 0x00000010, + 0x497b88ac, 0x80000580, 0x800811c0, 0x04020006, + 0x82040500, 0x0000000f, 0x82000400, 0x0010ab38, + 0x50000000, 0x480388ad, 0x80081040, 0x8058b040, + 0x040207f5, 0x1c01f000, 0x59a80005, 0x04000003, + 0x84000546, 0x0401f002, 0x84000506, 0x48035005, + 0x4803c857, 0x1c01f000, 0x4803c857, 0x4c080000, + 0x4c040000, 0x4c000000, 0x59c40892, 0x4807c857, + 0x80041580, 0x04000010, 0x80041480, 0x04021007, + 0x80081080, 0x80081000, 0x4008b000, 0x42000000, + 0x00000201, 0x0401f004, 0x4008b000, 0x42000000, + 0x00000210, 0x48038886, 0x8058b040, 0x040207fe, + 0x497b8886, 0x5c000000, 0x5c000800, 0x5c001000, + 0x1c01f000, 0x4803c856, 0x0201f800, 0x00103b25, + 0x04000005, 0x42028000, 0x0000002e, 0x0201f000, + 0x0010a449, 0x1c01f000, 0x42000800, 0x00000002, + 0x59a80005, 0x8c000514, 0x0402000b, 0x59c80835, + 0x82040d00, 0x00001f00, 0x80040910, 0x80040800, + 0x59a8006c, 0x80000540, 0x04000003, 0x42000800, + 0x0000025a, 0x4807c857, 0x1c01f000, 0x4c000000, + 0x59a80053, 0x4803c857, 0x82000580, 0x00000000, + 0x5c000000, 0x1c01f000, 0x4c000000, 0x59a80053, + 0x4803c857, 0x82000580, 0x00000001, 0x5c000000, + 0x1c01f000, 0x4c000000, 0x59a80053, 0x4803c857, + 0x82000580, 0x00000003, 0x5c000000, 0x1c01f000, + 0x4c000000, 0x59a80053, 0x82000580, 0x00000002, + 0x5c000000, 0x1c01f000, 0x4c000000, 0x4c040000, + 0x4c080000, 0x4c380000, 0x59a80040, 0x82000c80, + 0x00000007, 0x02021800, 0x001005d8, 0x0c01f806, + 0x5c007000, 0x5c001000, 0x5c000800, 0x5c000000, + 0x1c01f000, 0x0010166c, 0x0010167f, 0x00101693, + 0x00101695, 0x001016bc, 0x001016be, 0x001016c0, + 0x4803c856, 0x4a035042, 0x00000000, 0x42000000, + 0x00000002, 0x0401fa1b, 0x42000000, 0x00000002, + 0x0401f9ad, 0x0401fab2, 0x4803c856, 0x4a035040, + 0x00000006, 0x42000800, 0x0000001e, 0x42001000, + 0x001016c1, 0x0201f000, 0x0010606e, 0x497b5045, + 0x4a035050, 0x00000036, 0x4a03504f, 0x0000002a, + 0x4803c856, 0x4a035042, 0x00000001, 0x42000000, + 0x00000002, 0x0401f998, 0x4803c856, 0x4a035040, + 0x00000006, 0x42000800, 0x0000001e, 0x42001000, + 0x001016c1, 0x0201f000, 0x0010606e, 0x0201f800, + 0x001005d8, 0x4a035050, 0x00000036, 0x4803c856, + 0x4a035042, 0x00000003, 0x42000800, 0x00000000, + 0x0401faa3, 0x82040d00, 0x00000090, 0x82040580, + 0x00000090, 0x04000009, 0x82040580, 0x00000010, + 0x04000009, 0x82040580, 0x00000000, 0x04000008, + 0x0201f800, 0x001005d8, 0x42000000, 0x00000001, + 0x0401f005, 0x41780000, 0x0401f003, 0x42000000, + 0x00000002, 0x0401f970, 0x497b5046, 0x4803c856, + 0x4a035040, 0x00000006, 0x42000800, 0x0000001e, + 0x42001000, 0x001016c1, 0x0201f000, 0x0010606e, + 0x0201f800, 0x001005d8, 0x0201f800, 0x001005d8, + 0x1c01f000, 0x4c000000, 0x4c040000, 0x4c080000, + 0x4c380000, 0x59a80042, 0x82000c80, 0x00000007, + 0x02021800, 0x001005d8, 0x0c01f806, 0x5c007000, + 0x5c001000, 0x5c000800, 0x5c000000, 0x1c01f000, + 0x001016d7, 0x001016f6, 0x0010174a, 0x00101761, + 0x00101778, 0x00101781, 0x00101783, 0x0401f9fc, + 0x0402001b, 0x59a81048, 0x42000800, 0x00000000, + 0x0401fa63, 0x82040d00, 0x00000090, 0x82040580, + 0x00000090, 0x04000009, 0x82040580, 0x00000010, + 0x04000008, 0x82040580, 0x00000000, 0x04000007, + 0x0201f800, 0x001005d8, 0x84081540, 0x0401f004, + 0x84081542, 0x0401f002, 0x84081544, 0x480b5048, + 0x4a035040, 0x00000001, 0x0401f003, 0x0401f8cb, + 0x0401ff82, 0x1c01f000, 0x0401f88f, 0x04000052, + 0x0401f9db, 0x0402002a, 0x42000800, 0x00000000, + 0x0401fa43, 0x82040d00, 0x00000090, 0x82040580, + 0x00000000, 0x04000044, 0x82040580, 0x00000010, + 0x04000006, 0x82040580, 0x00000090, 0x04000009, + 0x0201f800, 0x001005d8, 0x59c40801, 0x82040d00, + 0x00018000, 0x82040580, 0x00000000, 0x04000036, + 0x42000800, 0x00000000, 0x0401fa2d, 0x82040d00, + 0x00000090, 0x82040580, 0x00000010, 0x04000006, + 0x82040580, 0x00000090, 0x04000006, 0x02020800, + 0x001005d8, 0x59a80048, 0x84000542, 0x0401f003, + 0x59a80048, 0x84000540, 0x48035048, 0x59a80045, + 0x80000000, 0x48035045, 0x82000580, 0x00000005, + 0x04000003, 0x0401f861, 0x0401f01e, 0x497b5045, + 0x59c40801, 0x82040d00, 0x00018000, 0x82040580, + 0x00000000, 0x04000009, 0x82040580, 0x00008000, + 0x04000009, 0x82040580, 0x00010000, 0x04000008, + 0x0201f800, 0x001005d8, 0x42000000, 0x00000001, + 0x0401f005, 0x41780000, 0x0401f003, 0x42000000, + 0x00000002, 0x0401f94b, 0x4a035042, 0x00000002, + 0x0401f004, 0x4a035040, 0x00000003, 0x0401f002, + 0x0401ff42, 0x1c01f000, 0x0401f83b, 0x04000015, + 0x59a8004f, 0x80000040, 0x4803504f, 0x0401f984, + 0x04020005, 0x4a035040, 0x00000003, 0x497b5041, + 0x0401f00c, 0x59a8004f, 0x80000540, 0x04020003, + 0x0401f89e, 0x0401f002, 0x0401f84b, 0x0401f82f, + 0x497b5045, 0x4a035042, 0x00000001, 0x0401ff2b, + 0x1c01f000, 0x0401f824, 0x04000015, 0x0401f970, + 0x0402000f, 0x59a80046, 0x80000000, 0x48035046, + 0x82000580, 0x00000007, 0x0402000c, 0x4a035052, + 0x0000000a, 0x497b5049, 0x59a80048, 0x8400055e, + 0x48035048, 0x4803c857, 0x0401f005, 0x0401f817, + 0x4a035042, 0x00000004, 0x0401ff3d, 0x1c01f000, + 0x0401f80d, 0x04000007, 0x0401f959, 0x04020003, + 0x0401ff1b, 0x0401f003, 0x0401f80c, 0x0401ff34, + 0x1c01f000, 0x0201f800, 0x001005d8, 0x0201f800, + 0x001005d8, 0x59a80050, 0x80000040, 0x48035050, + 0x0400088d, 0x1c01f000, 0x4c040000, 0x42000800, + 0x00000000, 0x0401f9b2, 0x82040d00, 0x00000090, + 0x82040580, 0x00000090, 0x04000009, 0x82040580, + 0x00000010, 0x04000009, 0x82040580, 0x00000000, + 0x04000009, 0x0201f800, 0x001005d8, 0x42000000, + 0x00000002, 0x0401f005, 0x42000000, 0x00000001, + 0x0401f002, 0x41780000, 0x0401f8ea, 0x5c000800, + 0x1c01f000, 0x4c040000, 0x59c40801, 0x82040d00, + 0x00018000, 0x82040580, 0x00000000, 0x04000009, + 0x82040580, 0x00008000, 0x04000009, 0x82040580, + 0x00010000, 0x04000009, 0x0201f800, 0x001005d8, + 0x42000000, 0x00000002, 0x0401f005, 0x42000000, + 0x00000001, 0x0401f002, 0x41780000, 0x0401f866, + 0x5c000800, 0x1c01f000, 0x4c040000, 0x59a80045, + 0x80000000, 0x48035045, 0x82000580, 0x00000005, + 0x04020018, 0x497b5045, 0x59c40801, 0x82040d00, + 0x00018000, 0x82040580, 0x00000000, 0x04000009, + 0x82040580, 0x00008000, 0x04000009, 0x82040580, + 0x00010000, 0x04000009, 0x0201f800, 0x001005d8, + 0x42000000, 0x00000002, 0x0401f005, 0x42000000, + 0x00000001, 0x0401f002, 0x41780000, 0x0401f846, + 0x42000800, 0x00000000, 0x0401f961, 0x82040d00, + 0x00000090, 0x82040580, 0x00000090, 0x04000009, + 0x82040580, 0x00000010, 0x04000009, 0x82040580, + 0x00000000, 0x04000009, 0x0201f800, 0x001005d8, + 0x42000000, 0x00000002, 0x0401f005, 0x42000000, + 0x00000001, 0x0401f002, 0x41780000, 0x0401f899, + 0x5c000800, 0x1c01f000, 0x4c200000, 0x59a80048, + 0x82000500, 0x00007fff, 0x02000800, 0x001005d8, + 0x59a84047, 0x80204102, 0x02001800, 0x001005d8, + 0x48235047, 0x80204500, 0x040007fa, 0x8c000504, + 0x04020007, 0x8c000502, 0x04020008, 0x8c000500, + 0x04020008, 0x0201f800, 0x001005d8, 0x42000000, + 0x00000002, 0x0401f005, 0x41780000, 0x0401f003, + 0x42000000, 0x00000001, 0x0401f80f, 0x5c004000, + 0x1c01f000, 0x04011000, 0x4a03c840, 0x0010b440, + 0x4a03c842, 0x00000009, 0x40000000, 0x040117ff, + 0x4a035047, 0x00000004, 0x4a03503e, 0x00000000, + 0x1c01f000, 0x59a80858, 0x82040d80, 0x01391077, + 0x04020008, 0x59e00813, 0x8c040d00, 0x04000005, + 0x82000d80, 0x00000002, 0x04020002, 0x41780000, + 0x4c000000, 0x0401f9b1, 0x5c000000, 0x800001c0, + 0x04000040, 0x82000d80, 0x00000001, 0x0402001d, + 0x42000800, 0x000000a0, 0x0401f909, 0x82040540, + 0x00000004, 0x42000800, 0x000000a0, 0x0401f909, + 0x42000800, 0x000000c0, 0x0401f901, 0x82040540, + 0x00000020, 0x42000800, 0x000000c0, 0x0401f901, + 0x59c40001, 0x82000500, 0xfffe7fff, 0x82000540, + 0x00000000, 0x48038801, 0x59a80054, 0x80000110, + 0x42000800, 0x000000e0, 0x0401f8f6, 0x0401f03c, + 0x82000d80, 0x00000002, 0x02020800, 0x001005d8, + 0x42000800, 0x000000a0, 0x0401f8e9, 0x82040500, + 0xfffffffb, 0x42000800, 0x000000a0, 0x0401f8e9, + 0x42000800, 0x000000c0, 0x0401f8e1, 0x82040500, + 0xffffffdf, 0x42000800, 0x000000c0, 0x0401f8e1, + 0x59c40001, 0x82000500, 0xfffe7fff, 0x82000540, + 0x00010000, 0x48038801, 0x59a80056, 0x80000110, + 0x42000800, 0x000000e0, 0x0401f8d6, 0x0401f01c, + 0x42000800, 0x000000a0, 0x0401f8cd, 0x82040540, + 0x00000004, 0x42000800, 0x000000a0, 0x0401f8cd, + 0x42000800, 0x000000c0, 0x0401f8c5, 0x82040500, + 0xffffffdf, 0x42000800, 0x000000c0, 0x0401f8c5, + 0x59c40001, 0x82000500, 0xfffe7fff, 0x82000540, + 0x00008000, 0x48038801, 0x59a80055, 0x80000110, + 0x42000800, 0x000000e0, 0x0401f8ba, 0x0401f163, + 0x4803c857, 0x59a80858, 0x82040d80, 0x01391077, + 0x04020008, 0x59e00813, 0x8c040d00, 0x04000005, + 0x82000d80, 0x00000002, 0x04020002, 0x41780000, + 0x4c000000, 0x0401f94d, 0x5c000000, 0x800001c0, + 0x04000026, 0x82000d80, 0x00000001, 0x04020010, + 0x59a8006c, 0x80000540, 0x04000004, 0x42001000, + 0x00000000, 0x0401fa0a, 0x42000800, 0x00000000, + 0x0401f897, 0x82040540, 0x00000090, 0x42000800, + 0x00000000, 0x0401f897, 0x0401f024, 0x82000d80, + 0x00000002, 0x02020800, 0x001005d8, 0x59a8006c, + 0x80000540, 0x04000004, 0x42001000, 0x00010000, + 0x0401f9f7, 0x42000800, 0x00000000, 0x0401f884, + 0x82040500, 0xffffff6f, 0x42000800, 0x00000000, + 0x0401f884, 0x0401f011, 0x59a8006c, 0x80000540, + 0x04000004, 0x42001000, 0x00008000, 0x0401f9e8, + 0x42000800, 0x00000000, 0x0401f875, 0x82040500, + 0xffffff6f, 0x82000540, 0x00000010, 0x42000800, + 0x00000000, 0x0401f873, 0x0401f124, 0x4c580000, + 0x4200b000, 0x00000014, 0x8058b040, 0x04000043, + 0x59c4000d, 0x8c000520, 0x040207fc, 0x0401f85c, + 0x59c4000d, 0x8c000520, 0x040207f8, 0x59c40808, + 0x84040d50, 0x48078808, 0x4200b000, 0x000000c8, + 0x8058b040, 0x040207ff, 0x4200b000, 0x00000014, + 0x8058b040, 0x04000031, 0x59c4000d, 0x8c000520, + 0x0402002e, 0x42000800, 0x00001000, 0x50040800, + 0x82040c80, 0x24220001, 0x04020003, 0x8c000504, + 0x040007f4, 0x0401f842, 0x59c4000d, 0x8c000520, + 0x04020022, 0x42000800, 0x00001000, 0x50040800, + 0x82040c80, 0x24220001, 0x04020003, 0x8c000504, + 0x040007e8, 0x4200b000, 0x0000000a, 0x8058b040, + 0x04000003, 0x0401f832, 0x0401f7fd, 0x4200b000, + 0x00000064, 0x59c4000d, 0x8c00051e, 0x0400000f, + 0x8058b040, 0x040207fc, 0x42000000, 0x00001000, + 0x50000000, 0x82000480, 0x24220001, 0x04020004, + 0x59c40808, 0x84040d10, 0x48078808, 0x80000580, + 0x4803c857, 0x0401f00c, 0x42000000, 0x00001000, + 0x50000000, 0x82000480, 0x24220001, 0x04020004, + 0x59c40808, 0x84040d10, 0x48078808, 0x82000540, + 0x00000001, 0x5c00b000, 0x1c01f000, 0x42000800, + 0x000000a0, 0x0401f816, 0x82040500, 0xfffffffe, + 0x42000800, 0x000000a0, 0x0401f816, 0x42000800, + 0x00000000, 0x0401f80e, 0x82040500, 0xfffffffe, + 0x42000800, 0x00000000, 0x0401f00e, 0x40000000, + 0x40000000, 0x40000000, 0x40000000, 0x40000000, + 0x1c01f000, 0x480b8805, 0x1c01f000, 0x4807880e, + 0x59c4080f, 0x82040d00, 0x000000ff, 0x1c01f000, + 0x900001c0, 0x80040d40, 0x84040d40, 0x4807880e, + 0x1c01f000, 0x82000d80, 0x00200000, 0x04000009, + 0x82000d80, 0x02000000, 0x04000006, 0x82000d80, + 0x01000000, 0x04000006, 0x59c408a3, 0x0401f006, + 0x59c408a3, 0x84040d30, 0x0401f003, 0x59c408a3, + 0x84040d32, 0x80040540, 0x480388a3, 0x480788a3, + 0x1c01f000, 0x59c400a3, 0x84000556, 0x480388a3, + 0x84000516, 0x480388a3, 0x1c01f000, 0x485fc857, + 0x4863c857, 0x4c640000, 0x4d3c0000, 0x4d400000, + 0x0201f800, 0x00106ede, 0x4863500a, 0x0201f800, + 0x0010ab33, 0x0402006c, 0x82600d00, 0x0000ff00, + 0x800409c0, 0x0400000c, 0x4200c800, 0x00000001, + 0x59a80010, 0x82000500, 0x000000ff, 0x80041110, + 0x80081580, 0x04000021, 0x82041580, 0x0000ff00, + 0x0400000a, 0x59c410a3, 0x82081500, 0x00008000, + 0x04000009, 0x59c410a7, 0x82081500, 0x0000ff00, + 0x82081580, 0x0000ff00, 0x4200c800, 0x00000000, + 0x04000012, 0x59a80005, 0x8c000502, 0x04020008, + 0x8c000500, 0x0402000d, 0x599c1017, 0x8c08151a, + 0x0400003e, 0x84000542, 0x48035005, 0x4200c800, + 0x00000002, 0x42028000, 0x00000004, 0x42027800, + 0x00000008, 0x0401f008, 0x59a80805, 0x84040d40, + 0x48075005, 0x42028000, 0x00000004, 0x42027800, + 0x00000400, 0x59a80006, 0x8c000502, 0x04020006, + 0x59a80805, 0x8c040d0a, 0x04020033, 0x84040d4a, + 0x48075005, 0x42000000, 0x0010b812, 0x0201f800, + 0x0010aa47, 0x59a8180a, 0x42001000, 0x00008013, + 0x0201f800, 0x00103a3e, 0x0201f800, 0x00103b25, + 0x04000015, 0x4d400000, 0x82600500, 0x000000ff, + 0x42028800, 0x0000ffff, 0x40643000, 0x42028000, + 0x0000000e, 0x0201f800, 0x0010a446, 0x42000800, + 0x00000001, 0x42001000, 0x00000100, 0x0201f800, + 0x0010618b, 0x5c028000, 0x599c0817, 0x8c040d0a, + 0x04020011, 0x493fc857, 0x4943c857, 0x0201f800, + 0x00101fe5, 0x0401f00c, 0x0201f800, 0x00103b25, + 0x04000009, 0x42028000, 0x0000000f, 0x42028800, + 0x0000ffff, 0x42003000, 0x00000000, 0x0201f800, + 0x0010a449, 0x497b8880, 0x5c028000, 0x5c027800, + 0x5c00c800, 0x1c01f000, 0x42000800, 0x000000a0, + 0x0401ff5f, 0x82040540, 0x00000002, 0x42000800, + 0x000000a0, 0x0401f75f, 0x42000800, 0x00000000, + 0x0401ff57, 0x82040540, 0x00000002, 0x42000800, + 0x00000000, 0x0401f757, 0x42000800, 0x000000a0, + 0x0401ff4f, 0x82040500, 0xfffffffd, 0x42000800, + 0x000000a0, 0x0401f74f, 0x42000800, 0x00000000, + 0x0401ff47, 0x82040500, 0xfffffffd, 0x42000800, + 0x00000000, 0x0401f747, 0x59c408a8, 0x0401ff38, + 0x0401ff37, 0x59c400a8, 0x80040d80, 0x040207fb, + 0x1c01f000, 0x4803c856, 0x4a038807, 0x00000001, + 0x497b8807, 0x59c40005, 0x48038805, 0x497b506c, + 0x497b506d, 0x41785800, 0x42006000, 0x00000001, + 0x42006800, 0x00000003, 0x0401f824, 0x0401f82f, + 0x40400000, 0x4803c857, 0x82408580, 0x00000000, + 0x0402001d, 0x41785800, 0x42006000, 0x0000001e, + 0x42006800, 0x00000014, 0x0401f818, 0x0401f823, + 0x40400000, 0x4803c857, 0x82408580, 0x00000800, + 0x04020011, 0x42005800, 0x00000001, 0x42006000, + 0x0000001e, 0x42006800, 0x00000014, 0x0401f80b, + 0x0401f816, 0x40400000, 0x4803c857, 0x82408580, + 0x0000ffff, 0x04020004, 0x4a03506c, 0x00000001, + 0x4803c856, 0x1c01f000, 0x41785000, 0x0401f812, + 0x0401f838, 0x40347000, 0x40340800, 0x0401f03d, + 0x42005000, 0x00000001, 0x0401f80b, 0x0401f831, + 0x40340800, 0x0401f037, 0x42005000, 0x00000002, + 0x0401f805, 0x0401f81d, 0x0401f835, 0x40048000, + 0x1c01f000, 0x0401f808, 0x0401f814, 0x40280800, + 0x0401f826, 0x402c0800, 0x0401f827, 0x40300800, + 0x0401f025, 0x42000800, 0x0000ffff, 0x42001000, + 0x00000001, 0x0401f829, 0x42001000, 0x00000010, + 0x0401f826, 0x42000800, 0x0000ffff, 0x42001000, + 0x00000010, 0x0401f021, 0x41780800, 0x42001000, + 0x00000002, 0x0401f01d, 0x0401f92e, 0x4a03d000, + 0x00050004, 0x0401f92b, 0x4a03d000, 0x00050005, + 0x0401f928, 0x4a03d000, 0x00050004, 0x42000800, + 0x00000001, 0x42001000, 0x00000001, 0x0401f00f, + 0x42000800, 0x00000002, 0x42001000, 0x00000002, + 0x0401f00a, 0x42001000, 0x00000005, 0x0401f007, + 0x42001000, 0x00000010, 0x0401f004, 0x42001000, + 0x00000010, 0x0401f01b, 0x0401f912, 0x82082c00, + 0x0010ab38, 0x50142800, 0x82081500, 0xffffffff, + 0x04000013, 0x0401f90b, 0x80081040, 0x80142902, + 0x40040000, 0x80140500, 0x04000007, 0x4a03d000, + 0x00070006, 0x0401f903, 0x4a03d000, 0x00070007, + 0x0401f006, 0x4a03d000, 0x00070004, 0x0401f8fd, + 0x4a03d000, 0x00070005, 0x0401f7ec, 0x1c01f000, + 0x41780800, 0x82082c00, 0x0010ab38, 0x50142800, + 0x82081500, 0xffffffff, 0x04000010, 0x0401f8f1, + 0x4a03d000, 0x00050001, 0x0401f8ee, 0x59e81800, + 0x80081040, 0x80142902, 0x8c0c1d06, 0x04000004, + 0x40140000, 0x80040d40, 0x0401f8e6, 0x4a03d000, + 0x00070000, 0x0401f7ef, 0x1c01f000, 0x480bc857, + 0x480b506d, 0x59c40001, 0x82000500, 0xffffefff, + 0x48038801, 0x41781800, 0x0401f8c4, 0x41785800, + 0x42006000, 0x0000001e, 0x42006800, 0x00000004, + 0x0401ff7a, 0x42006800, 0x0000003c, 0x0401ff7d, + 0x41785800, 0x42006000, 0x0000001e, 0x42006800, + 0x00000004, 0x0401ff71, 0x41786800, 0x0401ff75, + 0x41785800, 0x42006000, 0x0000001e, 0x41786800, + 0x0401ff6a, 0x42006800, 0x00000002, 0x0401ff6d, + 0x42006800, 0x00000001, 0x0401ff64, 0x42006800, + 0x000000f5, 0x0401ff67, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000004, 0x0401ff5b, + 0x42006800, 0x00000020, 0x0401ff5e, 0x59a8106d, + 0x0401f865, 0x42001800, 0x000200f5, 0x0401f897, + 0x59a8106d, 0x0401f879, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000004, 0x0401ff4b, + 0x41786800, 0x0401ff4f, 0x59c40001, 0x82000540, + 0x00001000, 0x48038801, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000015, 0x0401ff3f, + 0x0401ff4a, 0x40400000, 0x82000540, 0x00000002, + 0x4c000000, 0x41785800, 0x42006000, 0x0000001e, + 0x42006800, 0x00000015, 0x0401ff34, 0x5c000000, + 0x40006800, 0x0401ff37, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000015, 0x0401ff2b, + 0x0401ff36, 0x40400000, 0x82000500, 0x0000fffd, + 0x4c000000, 0x41785800, 0x42006000, 0x0000001e, + 0x42006800, 0x00000015, 0x0401ff20, 0x5c000000, + 0x40006800, 0x0401ff23, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000014, 0x0401ff17, + 0x0401ff22, 0x40400000, 0x82000540, 0x00000040, + 0x4c000000, 0x41785800, 0x42006000, 0x0000001e, + 0x42006800, 0x00000014, 0x0401ff0c, 0x5c000000, + 0x40006800, 0x0401ff0f, 0x41785800, 0x42006000, + 0x0000001e, 0x42006800, 0x00000014, 0x0401ff03, + 0x0401ff0e, 0x40400000, 0x82000500, 0x0000ffbf, + 0x4c000000, 0x41785800, 0x42006000, 0x0000001e, + 0x42006800, 0x00000014, 0x0401fef8, 0x5c000000, + 0x40006800, 0x0401fefb, 0x4a038886, 0x00002020, + 0x0401f04c, 0x480bc857, 0x82080580, 0x00010000, + 0x04020007, 0x82040d40, 0x00010000, 0x42001800, + 0x00000001, 0x0401f82d, 0x0401f00f, 0x82080580, + 0x00008000, 0x04000007, 0x82040d40, 0x00000000, + 0x42001800, 0x00900001, 0x0401f824, 0x0401f006, + 0x82040d40, 0x00008000, 0x42001800, 0x00100001, + 0x0401f81e, 0x1c01f000, 0x480bc857, 0x82080580, + 0x00010000, 0x04020008, 0x42001800, 0x000000a1, + 0x0401f816, 0x42001800, 0x000000c1, 0x0401f813, + 0x0401f011, 0x82080580, 0x00008000, 0x04000008, + 0x42001800, 0x000400a1, 0x0401f80c, 0x42001800, + 0x002000c1, 0x0401f809, 0x0401f007, 0x42001800, + 0x000400a1, 0x0401f805, 0x42001800, 0x000000c1, + 0x0401f802, 0x1c01f000, 0x480fc857, 0x41785800, + 0x42006000, 0x0000001e, 0x41786800, 0x0401feb7, + 0x400c6800, 0x80346960, 0x0401feba, 0x42006800, + 0x00000001, 0x0401feb1, 0x400c6800, 0x0401feb5, + 0x42006800, 0x00000003, 0x0401feac, 0x0401feb7, + 0x40400000, 0x8c000504, 0x040207fc, 0x1c01f000, + 0x42000000, 0x00000064, 0x80000040, 0x040207ff, + 0x1c01f000, 0x00020103, 0x00101bd5, 0x00101bdb, + 0x00101be1, 0x00101be9, 0x00101bef, 0x00101bf7, + 0x00101bff, 0x00101c09, 0x00101c0f, 0x00101c17, + 0x00101c1f, 0x00101c29, 0x00101c31, 0x00101c3b, + 0x00101c45, 0x000200f8, 0x00101c51, 0x00101c59, + 0x00101c61, 0x00101c6b, 0x00101c73, 0x00101c7d, + 0x00101c87, 0x00101c93, 0x00101c9b, 0x00101ca5, + 0x00101caf, 0x00101cbb, 0x00101cc5, 0x00101cd1, + 0x00101cdd, 0x000200fd, 0x00101ceb, 0x00101cf3, + 0x00101cfb, 0x00101d05, 0x00101d0d, 0x00101d17, + 0x00101d21, 0x00101d2d, 0x00101d35, 0x00101d3f, + 0x00101d49, 0x00101d55, 0x00101d5f, 0x00101d6b, + 0x00101d77, 0x00101d85, 0x00101d8d, 0x00101d97, + 0x00101da1, 0x00101dad, 0x00101db7, 0x00101dc3, + 0x00101dcf, 0x00101ddd, 0x00101de7, 0x00101df3, + 0x00101dff, 0x00101e0d, 0x00101e19, 0x00101e27, + 0x00101e35, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00101418, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00101418, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101418, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020729, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020729, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020729, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020729, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020729, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020015, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020015, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020015, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020015, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020015, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020015, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020015, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00101155, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00101155, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101155, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101155, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101155, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f800, + 0x00020104, 0x0201f000, 0x00020101, 0x4c000000, + 0x4df00000, 0x0201f800, 0x00101155, 0x0201f800, + 0x00101418, 0x0201f800, 0x00020729, 0x0201f800, + 0x00020015, 0x0201f800, 0x00101289, 0x0201f000, + 0x00020101, 0x4c000000, 0x4df00000, 0x0201f800, + 0x00101155, 0x0201f800, 0x00101418, 0x0201f800, + 0x00020729, 0x0201f800, 0x00020015, 0x0201f800, + 0x00101289, 0x0201f800, 0x00020104, 0x0201f000, + 0x00020101, 0x4c5c0000, 0x4c600000, 0x4178b800, + 0x0201f800, 0x001048ec, 0x040200fd, 0x59a8c026, + 0x0201f800, 0x0010513b, 0x04000003, 0x8c60c506, + 0x0400000e, 0x8c60c500, 0x04020004, 0x8c60c50e, + 0x040008f6, 0x0401f0f2, 0x0401fab4, 0x040200f0, + 0x0201f800, 0x0010513b, 0x04020004, 0x4a03501c, + 0x0000ffff, 0x0401f0ea, 0x8c60c504, 0x04000004, + 0x4a03501c, 0x0000ffff, 0x0401f0e5, 0x59a8c010, + 0x8260c500, 0x000000ff, 0x59a81013, 0x8c081500, + 0x0400005d, 0x8c081502, 0x0402005b, 0x59a8b81c, + 0x825c0d80, 0x0000ffff, 0x04020003, 0x4200b800, + 0x00000001, 0x805c1104, 0x82086400, 0x0010be21, + 0x50300800, 0x825c0500, 0x00000003, 0x0c01f001, + 0x00101e81, 0x00101e7c, 0x00101e80, 0x00101e7e, + 0x80040910, 0x0401f004, 0x80040930, 0x0401f002, + 0x80040920, 0x82040500, 0x000000ff, 0x82000d80, + 0x000000ff, 0x0400000f, 0x4c000000, 0x82000400, + 0x0010210e, 0x50000800, 0x80040910, 0x82040580, + 0x00000080, 0x5c000000, 0x04000030, 0x80600d80, + 0x0400002e, 0x80000540, 0x0400002c, 0x0401f00b, + 0x59a81005, 0x82081500, 0x00000003, 0x0402002b, + 0x59a81013, 0x84081542, 0x480b5013, 0x4a03501c, + 0x0000ffff, 0x0401f028, 0x4c000000, 0x59a80005, + 0x8c000514, 0x42001000, 0x00000010, 0x02020800, + 0x00104c6d, 0x5c000000, 0x0402001c, 0x417a8800, + 0x0201f800, 0x00105c9a, 0x04020016, 0x0201f800, + 0x001045e5, 0x04000006, 0x0201f800, 0x00104c62, + 0x0401f8b1, 0x0400000f, 0x0401f00c, 0x599c0019, + 0x8c00050e, 0x04020009, 0x0201f800, 0x001045a6, + 0x04020008, 0x0201f800, 0x00104c62, 0x0401f9e1, + 0x0401f8be, 0x04000003, 0x805cb800, 0x0401f7b2, + 0x485f501c, 0x0401f086, 0x4a03501c, 0x0000ffff, + 0x0401f083, 0x42003000, 0x0000007e, 0x59a8001c, + 0x82001580, 0x0000ffff, 0x04020005, 0x80000d80, + 0x4018b000, 0x4803c856, 0x0401f009, 0x8018b480, + 0x04001004, 0x40000800, 0x4803c856, 0x0401f004, + 0x4a03501c, 0x0000ffff, 0x0401f071, 0x4c040000, + 0x4c580000, 0x82040400, 0x0010210e, 0x50000000, + 0x82000500, 0x000000ff, 0x80604580, 0x0400005c, + 0x0201f800, 0x00105c9b, 0x04020061, 0x59a80005, + 0x8c000514, 0x42001000, 0x00000010, 0x02020800, + 0x00104c6d, 0x5c00b000, 0x5c000800, 0x040207d7, + 0x4c040000, 0x4c580000, 0x845cbd00, 0x0201f800, + 0x00020245, 0x04000008, 0x599c0019, 0x8c00050e, + 0x04020047, 0x0201f800, 0x001045ab, 0x0402004c, + 0x0401f002, 0x845cbd40, 0x0201f800, 0x00104c62, + 0x0201f800, 0x001049e7, 0x04020007, 0x59a80005, + 0x8c000502, 0x04000033, 0x59340200, 0x8c00050e, + 0x04020030, 0x59a81013, 0x8c081502, 0x04000025, + 0x0201f800, 0x00104a09, 0x04000031, 0x8c5cbd00, + 0x04020004, 0x0201f800, 0x001045ff, 0x0401f02c, + 0x0401f9cd, 0x0400002a, 0x42026000, 0x0010bde9, + 0x49366009, 0x497a6008, 0x417a7800, 0x0401f925, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00103b25, 0x0400001d, 0x41782800, + 0x42003000, 0x00000008, 0x4d400000, 0x4d440000, + 0x59368c03, 0x42028000, 0x00000029, 0x0201f800, + 0x0010a446, 0x5c028800, 0x5c028000, 0x0401f010, + 0x4937c857, 0x599c0019, 0x8c00050e, 0x0402000c, + 0x0401f96c, 0x0401f849, 0x04000011, 0x0401f008, + 0x59a80013, 0x8c000500, 0x04000003, 0x0401f9a6, + 0x04000003, 0x0401f828, 0x04000009, 0x5c00b000, + 0x5c000800, 0x80040800, 0x8058b040, 0x04020798, + 0x4a03501c, 0x0000ffff, 0x0401f005, 0x4937c857, + 0x5c00b000, 0x5c000800, 0x4807501c, 0x5c00c000, + 0x5c00b800, 0x1c01f000, 0x4803c856, 0x4a03501c, + 0x00000001, 0x42028800, 0x000007fe, 0x42003000, + 0x00fffffe, 0x0201f800, 0x001045a6, 0x0402000c, + 0x0401f948, 0x0401f825, 0x04000009, 0x59a80026, + 0x8400054e, 0x48035026, 0x0201f800, 0x0010930f, + 0x82000540, 0x00000001, 0x1c01f000, 0x80000580, + 0x0401f7fe, 0x4937c857, 0x0201f800, 0x00107942, + 0x04000015, 0x49366009, 0x4a026406, 0x00000001, + 0x417a7800, 0x0201f800, 0x00104567, 0x59a8001b, + 0x80000000, 0x4803501b, 0x42027000, 0x00000004, + 0x599c0019, 0x8c00050e, 0x04000003, 0x42027000, + 0x00000000, 0x0201f800, 0x000207a1, 0x82000540, + 0x00000001, 0x1c01f000, 0x4937c857, 0x0201f800, + 0x00107942, 0x0400001c, 0x49366009, 0x59340403, + 0x82000580, 0x000007fe, 0x04000005, 0x4d3c0000, + 0x417a7800, 0x0401f8b7, 0x5c027800, 0x4a026406, + 0x00000001, 0x417a7800, 0x0201f800, 0x00104567, + 0x42000800, 0x00000003, 0x0201f800, 0x00104571, + 0x59a8001b, 0x80000000, 0x4803501b, 0x42027000, + 0x00000002, 0x0201f800, 0x000207a1, 0x82000540, + 0x00000001, 0x1c01f000, 0x4803c856, 0x42028800, + 0x000007fc, 0x42003000, 0x00fffffc, 0x0201f800, + 0x001045a6, 0x04020005, 0x0401f805, 0x04000003, + 0x4a035027, 0x0000ffff, 0x1c01f000, 0x4937c857, + 0x0201f800, 0x00107942, 0x04000014, 0x49366009, + 0x4a026406, 0x00000001, 0x417a7800, 0x0201f800, + 0x00104567, 0x42000800, 0x00000003, 0x0201f800, + 0x00104571, 0x59a80028, 0x80000000, 0x48035028, + 0x42027000, 0x00000002, 0x0201f800, 0x000207a1, + 0x82000540, 0x00000001, 0x1c01f000, 0x480bc857, + 0x492fc857, 0x4c5c0000, 0x4008b800, 0x42028800, + 0x000007fd, 0x42003000, 0x00fffffd, 0x0201f800, + 0x001045a6, 0x0402001a, 0x0201f800, 0x0002075a, + 0x04000017, 0x49366009, 0x5934000a, 0x84000544, + 0x4802680a, 0x812e59c0, 0x04000005, 0x592c0404, + 0x8c00051e, 0x04000002, 0x48ee6021, 0x492e6008, + 0x4a026406, 0x00000001, 0x485e601c, 0x42027000, + 0x00000022, 0x0201f800, 0x000207a1, 0x82000540, + 0x00000001, 0x5c00b800, 0x1c01f000, 0x80000580, + 0x0401f7fd, 0x5c000000, 0x4c000000, 0x4803c857, + 0x4943c857, 0x493fc857, 0x4d340000, 0x4d440000, + 0x4c580000, 0x4d2c0000, 0x4c5c0000, 0x0201f800, + 0x00106c55, 0x4df00000, 0x0201f800, 0x001069f1, + 0x0201f800, 0x00106aac, 0x0201f800, 0x00106737, + 0x0201f800, 0x0010848a, 0x5c03e000, 0x02000800, + 0x00106c4b, 0x4200b000, 0x000007f0, 0x417a8800, + 0x0201f800, 0x00020245, 0x0402001f, 0x8d3e7d14, + 0x04000005, 0x59340212, 0x82000500, 0x0000ff00, + 0x04000019, 0x8d3e7d06, 0x04000004, 0x59340200, + 0x8c00050e, 0x04020014, 0x8d3e7d18, 0x0400000f, + 0x5934b80f, 0x805cb9c0, 0x04000009, 0x49425a06, + 0x592cb800, 0x0201f800, 0x000202ce, 0x805cb9c0, + 0x040207fb, 0x497a680f, 0x497a6810, 0x4a026c00, + 0x00000707, 0x0401f004, 0x4937c857, 0x0201f800, + 0x001042b4, 0x81468800, 0x8058b040, 0x040207dd, + 0x8d3e7d02, 0x04000011, 0x497b501d, 0x42028800, + 0x000007f0, 0x4200b000, 0x00000010, 0x0201f800, + 0x00020245, 0x04020006, 0x4937c857, 0x4a026c00, + 0x00000707, 0x0201f800, 0x001042b4, 0x81468800, + 0x8058b040, 0x040207f6, 0x5c00b800, 0x5c025800, + 0x5c00b000, 0x5c028800, 0x5c026800, 0x1c01f000, + 0x5c000000, 0x4c000000, 0x4803c857, 0x4933c857, + 0x493fc857, 0x4d340000, 0x4d400000, 0x4d440000, + 0x4d2c0000, 0x4c5c0000, 0x0201f800, 0x00106c55, + 0x4df00000, 0x59326809, 0x813669c0, 0x04000020, + 0x59368c03, 0x42028000, 0x00000029, 0x0201f800, + 0x00106a50, 0x0201f800, 0x00106ab4, 0x0201f800, + 0x001067fd, 0x0201f800, 0x0010a2ff, 0x4937c857, + 0x8d3e7d18, 0x04000010, 0x5934b80f, 0x805cb9c0, + 0x0400000a, 0x405e5800, 0x49425a06, 0x592cb800, + 0x0201f800, 0x000202ce, 0x805cb9c0, 0x040207fa, + 0x497a680f, 0x497a6810, 0x4a026c00, 0x00000707, + 0x0401f003, 0x0201f800, 0x001042b4, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x5c00b800, 0x5c025800, + 0x5c028800, 0x5c028000, 0x5c026800, 0x1c01f000, + 0x4933c857, 0x59a80026, 0x8c000508, 0x04020012, + 0x59305009, 0x482bc857, 0x836c0580, 0x00000002, + 0x0402000d, 0x0401f813, 0x0402000b, 0x58280403, + 0x82000580, 0x000007fc, 0x04000008, 0x59a8001b, + 0x80000040, 0x4803c857, 0x02001800, 0x001005d8, + 0x4803501b, 0x1c01f000, 0x59a80028, 0x80000040, + 0x4803c857, 0x040017fc, 0x48035028, 0x1c01f000, + 0x59300008, 0x800001c0, 0x04020009, 0x59300403, + 0x82000580, 0x00000001, 0x04020004, 0x82000540, + 0x00000001, 0x0401f002, 0x80000580, 0x1c01f000, + 0x4937c857, 0x59340200, 0x84000502, 0x48026a00, + 0x1c01f000, 0x4933c857, 0x493fc857, 0x4947c857, + 0x4d3c0000, 0x4d400000, 0x4d340000, 0x4d440000, + 0x4c580000, 0x0201f800, 0x00106c55, 0x4df00000, + 0x813e79c0, 0x04020004, 0x4200b000, 0x00000001, + 0x0401f004, 0x4200b000, 0x000007f0, 0x417a8800, + 0x41440000, 0x81ac0400, 0x50000000, 0x80026d40, + 0x04000019, 0x42027800, 0x00000001, 0x0201f800, + 0x001048f6, 0x42028000, 0x00000029, 0x417a7800, + 0x0201f800, 0x00106a50, 0x0201f800, 0x00106ab4, + 0x0201f800, 0x001067fd, 0x0201f800, 0x001049e7, + 0x04020005, 0x4937c857, 0x4a026c00, 0x00000404, + 0x0401f003, 0x0201f800, 0x00104a14, 0x0201f800, + 0x0010a2ff, 0x81468800, 0x8058b040, 0x040207e1, + 0x5c03e000, 0x02000800, 0x00106c4b, 0x5c00b000, + 0x5c028800, 0x5c026800, 0x5c028000, 0x5c027800, + 0x1c01f000, 0x4937c857, 0x4947c857, 0x4c5c0000, + 0x4c600000, 0x4c640000, 0x59a80013, 0x8c000500, + 0x0400001f, 0x599c0017, 0x8c00050a, 0x0402001c, + 0x5934ba02, 0x825cbd00, 0x000000ff, 0x485fc857, + 0x4178c000, 0x4178c800, 0x82600400, 0x0010be21, + 0x50002000, 0x8060c1c0, 0x04000008, 0x82100500, + 0x000000ff, 0x82002d80, 0x000000ff, 0x0400000c, + 0x805c0580, 0x0400000d, 0x80102110, 0x8064c800, + 0x82640580, 0x00000004, 0x040207f5, 0x8060c000, + 0x82600580, 0x00000020, 0x040207eb, 0x4813c857, + 0x82000540, 0x00000001, 0x5c00c800, 0x5c00c000, + 0x5c00b800, 0x1c01f000, 0x59a80026, 0x4803c857, + 0x8c000512, 0x1c01f000, 0x00007eef, 0x00007de8, + 0x00007ce4, 0x000080e2, 0x00007be1, 0x000080e0, + 0x000080dc, 0x000080da, 0x00007ad9, 0x000080d6, + 0x000080d5, 0x000080d4, 0x000080d3, 0x000080d2, + 0x000080d1, 0x000079ce, 0x000078cd, 0x000080cc, + 0x000080cb, 0x000080ca, 0x000080c9, 0x000080c7, + 0x000080c6, 0x000077c5, 0x000076c3, 0x000080bc, + 0x000080ba, 0x000075b9, 0x000080b6, 0x000074b5, + 0x000073b4, 0x000072b3, 0x000080b2, 0x000080b1, + 0x000080ae, 0x000071ad, 0x000080ac, 0x000070ab, + 0x00006faa, 0x00006ea9, 0x000080a7, 0x00006da6, + 0x00006ca5, 0x00006ba3, 0x00006a9f, 0x0000699e, + 0x0000689d, 0x0000809b, 0x00008098, 0x00006797, + 0x00006690, 0x0000658f, 0x00006488, 0x00006384, + 0x00006282, 0x00008081, 0x00008080, 0x0000617c, + 0x0000607a, 0x00008079, 0x00005f76, 0x00008075, + 0x00008074, 0x00008073, 0x00008072, 0x00008071, + 0x0000806e, 0x00005e6d, 0x0000806c, 0x00005d6b, + 0x00005c6a, 0x00005b69, 0x00008067, 0x00005a66, + 0x00005965, 0x00005863, 0x0000575c, 0x0000565a, + 0x00005559, 0x00008056, 0x00008055, 0x00005454, + 0x00005353, 0x00005252, 0x00005151, 0x0000504e, + 0x00004f4d, 0x0000804c, 0x0000804b, 0x00004e4a, + 0x00004d49, 0x00008047, 0x00004c46, 0x00008045, + 0x00008043, 0x0000803c, 0x0000803a, 0x00008039, + 0x00008036, 0x00004b35, 0x00008034, 0x00004a33, + 0x00004932, 0x00004831, 0x0000802e, 0x0000472d, + 0x0000462c, 0x0000452b, 0x0000442a, 0x00004329, + 0x00004227, 0x00008026, 0x00008025, 0x00004123, + 0x0000401f, 0x00003f1e, 0x00003e1d, 0x00003d1b, + 0x00003c18, 0x00008017, 0x00008010, 0x00003b0f, + 0x00003a08, 0x00008004, 0x00003902, 0x00008001, + 0x00008000, 0x00008000, 0x00003800, 0x00003700, + 0x00003600, 0x00008000, 0x00003500, 0x00008000, + 0x00008000, 0x00008000, 0x00003400, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00003300, 0x00003200, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00003100, 0x00003000, 0x00008000, + 0x00008000, 0x00002f00, 0x00008000, 0x00002e00, + 0x00002d00, 0x00002c00, 0x00008000, 0x00008000, + 0x00008000, 0x00002b00, 0x00008000, 0x00002a00, + 0x00002900, 0x00002800, 0x00008000, 0x00002700, + 0x00002600, 0x00002500, 0x00002400, 0x00002300, + 0x00002200, 0x00008000, 0x00008000, 0x00002100, + 0x00002000, 0x00001f00, 0x00001e00, 0x00001d00, + 0x00001c00, 0x00008000, 0x00008000, 0x00001b00, + 0x00001a00, 0x00008000, 0x00001900, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00001800, 0x00008000, 0x00001700, + 0x00001600, 0x00001500, 0x00008000, 0x00001400, + 0x00001300, 0x00001200, 0x00001100, 0x00001000, + 0x00000f00, 0x00008000, 0x00008000, 0x00000e00, + 0x00000d00, 0x00000c00, 0x00000b00, 0x00000a00, + 0x00000900, 0x00008000, 0x00008000, 0x00000800, + 0x00000700, 0x00008000, 0x00000600, 0x00008000, + 0x00008000, 0x00008000, 0x00000500, 0x00000400, + 0x00000300, 0x00008000, 0x00000200, 0x00008000, + 0x00008000, 0x00008000, 0x00000100, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00000000, 0x00008000, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00008000, 0x00008000, 0x00008000, + 0x00008000, 0x00008000, 0x0201f800, 0x001007d3, + 0x02000800, 0x001005d8, 0x492f4016, 0x1c01f000, + 0x83a0ac00, 0x00000006, 0x83a00580, 0x0010b4a4, + 0x0400000c, 0x492fc857, 0x812e59c0, 0x02000800, + 0x001005d8, 0x832ca400, 0x00000006, 0x4200b000, + 0x0000000d, 0x0201f800, 0x0010ab17, 0x0401f00f, + 0x4200b000, 0x00000010, 0x83e0a400, 0x00000020, + 0x50500000, 0x8050a000, 0x50500800, 0x900409c0, + 0x80040540, 0x4400a800, 0x8050a000, 0x8054a800, + 0x8058b040, 0x040207f7, 0x1c01f000, 0x59a00206, + 0x4803c857, 0x82000c80, 0x0000007f, 0x040210c9, + 0x59a80821, 0x0c01f001, 0x001022c0, 0x00102300, + 0x00102300, 0x0010234b, 0x0010236d, 0x00102300, + 0x001022c0, 0x0010238f, 0x001023a0, 0x00102300, + 0x00102300, 0x001023ad, 0x001023c5, 0x001023dd, + 0x00102300, 0x001023e7, 0x001023f4, 0x00102300, + 0x0010241d, 0x00102300, 0x0010247a, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102491, 0x00102300, + 0x001024e3, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x001024e8, 0x00102560, 0x00102300, + 0x00102567, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102569, 0x001025ea, + 0x00102727, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102736, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102753, 0x001027a6, + 0x00102802, 0x00102816, 0x00102835, 0x00102a70, + 0x00102dff, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00102300, + 0x00102300, 0x00102fb4, 0x00103028, 0x00102300, + 0x00102300, 0x00103094, 0x00102300, 0x00103126, + 0x001031d8, 0x00102300, 0x00102300, 0x0010320f, + 0x0010326b, 0x00102300, 0x001032bd, 0x00103419, + 0x00102300, 0x0010342d, 0x001034b8, 0x00102300, + 0x00102300, 0x00102300, 0x00102300, 0x00103522, + 0x00103526, 0x00103545, 0x00102300, 0x001035e7, + 0x00102300, 0x00102300, 0x00103615, 0x00102300, + 0x00103643, 0x00102300, 0x00102300, 0x001036aa, + 0x001037b7, 0x00103814, 0x00102300, 0x0010387a, + 0x00102300, 0x00102300, 0x001038d3, 0x00103936, + 0x00102300, 0x48efc857, 0x4031d800, 0x58ef400b, + 0x58ec0002, 0x82000580, 0x00000200, 0x04000045, + 0x48efc857, 0x4a034206, 0x00004000, 0x0201f800, + 0x00103a15, 0x83a00580, 0x0010b4a4, 0x0400000d, + 0x58ee580a, 0x4d2c0000, 0x0401f856, 0x41a25800, + 0x0201f800, 0x001007f4, 0x40ee5800, 0x0201f800, + 0x001007f4, 0x5c025800, 0x0201f000, 0x000202da, + 0x04026007, 0x59a0001d, 0x84000542, 0x4803401d, + 0x4a01d809, 0x001022d4, 0x1c01f000, 0x59a00206, + 0x82000d80, 0x00004000, 0x04000006, 0x900001c0, + 0x82000540, 0x00000011, 0x4803c011, 0x0401f005, + 0x900001c0, 0x82000540, 0x00000010, 0x4803c011, + 0x0401f845, 0x59e00017, 0x8c000508, 0x0402000c, + 0x4203e000, 0x30000001, 0x4203e000, 0x40000000, + 0x40ee5800, 0x0201f800, 0x001007f4, 0x59a0001d, + 0x84000504, 0x4803401d, 0x1c01f000, 0x4a03c017, + 0x00000000, 0x59a00206, 0x82000d80, 0x00004000, + 0x040007f0, 0x4a03c017, 0x00000001, 0x0401f7ed, + 0x4803c856, 0x4a034206, 0x00004001, 0x0401f7c0, + 0x4803c856, 0x4a034206, 0x00004002, 0x0401f7bc, + 0x4803c856, 0x4a034206, 0x00004003, 0x0401f7b8, + 0x4803c856, 0x4a034206, 0x00004005, 0x0401f7b4, + 0x4803c856, 0x4a034206, 0x00004006, 0x0401f7b0, + 0x4803c856, 0x4a034206, 0x0000400b, 0x0401f7ac, + 0x4803c856, 0x4a034206, 0x0000400c, 0x0401f7a8, + 0x4803c856, 0x4a034206, 0x0000400c, 0x0401f7a4, + 0x48efc857, 0x58eca80a, 0x8054a9c0, 0x02000800, + 0x001005d8, 0x83a0a400, 0x00000006, 0x8254ac00, + 0x00000006, 0x4200b000, 0x0000000d, 0x0201f000, + 0x0010ab17, 0x59a00206, 0x4803c857, 0x59a00406, + 0x4803c857, 0x59a00207, 0x4803c857, 0x59a00407, + 0x4803c857, 0x59a00208, 0x4803c857, 0x59a00408, + 0x4803c857, 0x59a00209, 0x4803c857, 0x83e0ac00, + 0x00000020, 0x83a0a400, 0x00000006, 0x4200b000, + 0x00000010, 0x50500000, 0x4400a800, 0x8054a800, + 0x900001c0, 0x4400a800, 0x8054a800, 0x8050a000, + 0x8058b040, 0x040207f8, 0x1c01f000, 0x59a00406, + 0x800000c2, 0x59a00a07, 0x900409c0, 0x80040540, + 0x84000540, 0x59a00c07, 0x8c040d00, 0x04000018, + 0x59a80805, 0x8c040d0e, 0x040207ba, 0x42000800, + 0x00000064, 0x80040840, 0x04000007, 0x4a030000, + 0x00000001, 0x40000000, 0x59801000, 0x8c081500, + 0x040007f9, 0x04000005, 0x48030004, 0x4a030000, + 0x00000000, 0x0401f75b, 0x4a030000, 0x00000000, + 0x4a034406, 0x00000004, 0x040007a2, 0x4803880e, + 0x0401f754, 0x59a00406, 0x800000c2, 0x59a00c07, + 0x8c040d00, 0x0400001a, 0x59a80805, 0x8c040d0e, + 0x0402079c, 0x42000800, 0x00000064, 0x80040840, + 0x04000007, 0x4a030000, 0x00000001, 0x40000000, + 0x59801000, 0x8c081500, 0x040007f9, 0x04000007, + 0x48030004, 0x59800805, 0x48074406, 0x4a030000, + 0x00000000, 0x0401f73b, 0x4a030000, 0x00000000, + 0x4a034406, 0x00000004, 0x04000782, 0x4803880e, + 0x59c4080f, 0x48074406, 0x0401f732, 0x59a01c06, + 0x59a00207, 0x900c19c0, 0x800c1d40, 0x580c0803, + 0x80000580, 0x500c1000, 0x80080400, 0x800c1800, + 0x80040840, 0x040207fc, 0x48034406, 0x900001c0, + 0x48034207, 0x800001c0, 0x04000722, 0x0401f769, + 0x4a034406, 0x00000004, 0x4a034207, 0x00000000, + 0x4a034407, 0x00000010, 0x59a8000d, 0x48034208, + 0x900001c0, 0x48034408, 0x4a034209, 0x00000002, + 0x0401f714, 0x59a00407, 0x59a01207, 0x900811c0, + 0x80081540, 0x59a00409, 0x59a01a09, 0x900c19c0, + 0x800c1d40, 0x59a00a08, 0x59a00408, 0x900409c0, + 0x80040d40, 0x59a0020a, 0x82002480, 0x00000010, + 0x04001754, 0x59a02406, 0x900001c0, 0x80100540, + 0x59a8280d, 0x80142480, 0x0400174e, 0x0201f000, + 0x00103a25, 0x59a00407, 0x59a01207, 0x900811c0, + 0x80081540, 0x59a00409, 0x59a01a09, 0x900c19c0, + 0x800c1d40, 0x59a00a08, 0x59a00408, 0x900409c0, + 0x80040d40, 0x59a0020a, 0x82002480, 0x00000010, + 0x0400173c, 0x59a02406, 0x900001c0, 0x80100540, + 0x59a8280d, 0x80142480, 0x04001736, 0x0201f000, + 0x00103a28, 0x59a00a0a, 0x59a00406, 0x900409c0, + 0x80040d40, 0x59a01407, 0x59a00207, 0x900811c0, + 0x80081540, 0x44080800, 0x0401f6da, 0x59a00a0a, + 0x59a00406, 0x900409c0, 0x80040d40, 0x50040000, + 0x82000d00, 0x0000ffff, 0x48074207, 0x82000d00, + 0xffff0000, 0x900409c0, 0x48074407, 0x0401f6cd, + 0x59a00406, 0x8c000500, 0x04000020, 0x59a01207, + 0x59a01c07, 0x59a02208, 0x480b5054, 0x480f5055, + 0x48135056, 0x59c40801, 0x82040d00, 0x00018000, + 0x82040580, 0x00000000, 0x04000009, 0x82040580, + 0x00008000, 0x04000008, 0x82040580, 0x00010000, + 0x04000007, 0x0201f800, 0x001005d8, 0x40080000, + 0x0401f004, 0x400c0000, 0x0401f002, 0x40100000, + 0x80000110, 0x42000800, 0x000000e0, 0x0201f800, + 0x00101944, 0x0401f007, 0x59a81054, 0x59a81855, + 0x59a82056, 0x480b4207, 0x480f4407, 0x48134208, + 0x0401f6a4, 0x4d2c0000, 0x4d340000, 0x4d300000, + 0x4d440000, 0x59a28c06, 0x0201f800, 0x00020245, + 0x04000006, 0x5c028800, 0x5c026000, 0x5c026800, + 0x5c025800, 0x0401f6e7, 0x59a04407, 0x59a00207, + 0x900001c0, 0x80204540, 0x0401f81e, 0x04000009, + 0x4a034208, 0x00000001, 0x4a034406, 0x0000ffff, + 0x4a034207, 0x0000ffff, 0x497b4407, 0x0401f00b, + 0x0401f822, 0x0400000e, 0x4a034208, 0x00000002, + 0x59300402, 0x48034406, 0x59300202, 0x48034207, + 0x59300206, 0x48034407, 0x5c028800, 0x5c026000, + 0x5c026800, 0x5c025800, 0x0401f67a, 0x5c028800, + 0x5c026000, 0x5c026800, 0x5c025800, 0x0401f6c1, + 0x4937c856, 0x4823c856, 0x4d2c0000, 0x5934000f, + 0x80025d40, 0x04000007, 0x592c0005, 0x80200580, + 0x592c0000, 0x040207fb, 0x82000540, 0x00000001, + 0x5c025800, 0x1c01f000, 0x4823c857, 0x4d2c0000, + 0x4d300000, 0x42026000, 0x0010d1c0, 0x59300406, + 0x82000d80, 0x00000003, 0x04000004, 0x82000d80, + 0x00000006, 0x04020007, 0x59325808, 0x812e59c0, + 0x04000004, 0x592c0005, 0x80200580, 0x0400000a, + 0x83326400, 0x00000024, 0x41580000, 0x81300480, + 0x040017ef, 0x80000580, 0x5c026000, 0x5c025800, + 0x1c01f000, 0x82000540, 0x00000001, 0x5c026000, + 0x5c025800, 0x1c01f000, 0x83a00580, 0x0010b4a4, + 0x04020684, 0x59a80005, 0x8c00050e, 0x04020003, + 0x4a030000, 0x00000000, 0x4a034206, 0x00004000, + 0x4a03c011, 0x40000010, 0x0401fea7, 0x59e00017, + 0x8c000508, 0x04000003, 0x4a03c017, 0x00000000, + 0x4203e000, 0x30000001, 0x4203e000, 0x40000000, + 0x0401f000, 0x800409c0, 0x04000004, 0x4a034406, + 0x00000001, 0x0401f677, 0x836c0580, 0x00000003, + 0x04020010, 0x59a80010, 0x497b4406, 0x0201f800, + 0x0010513b, 0x0400000f, 0x82000d00, 0x00ffff00, + 0x0402000c, 0x82000c00, 0x0010210e, 0x50040800, + 0x80040910, 0x82041580, 0x00000080, 0x04020004, + 0x4a034406, 0x00000007, 0x0401f662, 0x48074406, + 0x82000d00, 0x0000ffff, 0x48074207, 0x80000120, + 0x48034407, 0x59a80026, 0x82001500, 0x00000100, + 0x480b4409, 0x8c000502, 0x0400001f, 0x8c000506, + 0x04000009, 0x82000d00, 0x0000000a, 0x82040d80, + 0x0000000a, 0x04020004, 0x4a034209, 0x00000001, + 0x0401f022, 0x8c00050a, 0x04000009, 0x82000d00, + 0x00000022, 0x82040d80, 0x00000022, 0x04020004, + 0x4a034209, 0x00000003, 0x0401f018, 0x8c000508, + 0x04000009, 0x82000d00, 0x00000012, 0x82040d80, + 0x00000012, 0x04020004, 0x4a034209, 0x00000002, + 0x0401f00e, 0x0201f800, 0x0010513b, 0x04020004, + 0x4a034209, 0x00000004, 0x0401f5e6, 0x8c000506, + 0x04000004, 0x4a034406, 0x00000005, 0x0401f62d, + 0x4a034209, 0x00000000, 0x0401f5de, 0x59a80037, + 0x48034407, 0x59a80038, 0x48034209, 0x0401f5d9, + 0x42007800, 0x0010b8ec, 0x59a00406, 0x4803c857, + 0x82000c80, 0x00000006, 0x04021622, 0x0c01f001, + 0x001024f6, 0x001024f7, 0x00102505, 0x00102518, + 0x00102539, 0x001024f6, 0x0401f61a, 0x836c0580, + 0x00000000, 0x04000613, 0x59a00a07, 0x59a00407, + 0x900001c0, 0x80040d40, 0x4807c857, 0x59a00a08, + 0x59a00408, 0x900001c0, 0x80040d40, 0x4807c857, + 0x0401f056, 0x836c0580, 0x00000000, 0x04000605, + 0x59a00407, 0x59a01207, 0x900001c0, 0x80081540, + 0x59a00408, 0x59a01a08, 0x900001c0, 0x800c1d40, + 0x42000000, 0x0010c1bf, 0x480fc857, 0x480bc857, + 0x42000800, 0x00001000, 0x0201f000, 0x00103a28, + 0x59a00a07, 0x59a00407, 0x900001c0, 0x80041d40, + 0x820c0c80, 0x0010ab4a, 0x040215f2, 0x820c0c80, + 0x00100000, 0x040015ef, 0x480fc857, 0x823c7c00, + 0x00000009, 0x503c0800, 0x800409c0, 0x04000006, + 0x823c0580, 0x0000000d, 0x040005e6, 0x803c7800, + 0x0401f7f9, 0x59e41001, 0x82080d00, 0xfffeffcf, + 0x4807c801, 0x440c7800, 0x46001800, 0x0201f800, + 0x800c1800, 0x46001800, 0x001005cb, 0x480bc801, + 0x0401f022, 0x59a01a07, 0x59a00407, 0x900001c0, + 0x800c1d40, 0x480c7801, 0x59a02208, 0x59a00408, + 0x900001c0, 0x80102540, 0x48107802, 0x59a00209, + 0x80000040, 0x040015cb, 0x48007806, 0x80000000, + 0x48007805, 0x42000800, 0x00004000, 0x40001000, + 0x0201f800, 0x00106681, 0x80000540, 0x04000003, + 0x49787801, 0x0401f5bf, 0x40040000, 0x800c1c00, + 0x040015bc, 0x480c7803, 0x48107804, 0x49787808, + 0x59a00409, 0x48007807, 0x59e40001, 0x4803c857, + 0x82000540, 0x00040000, 0x4803c801, 0x0401f561, + 0x59a80006, 0x48034406, 0x59a80007, 0x48034207, + 0x59a80008, 0x48034407, 0x0401f55a, 0x0201f800, + 0x001005d8, 0x4803c856, 0x4a03c013, 0x03800300, + 0x4a03c014, 0x03800380, 0x59a00c06, 0x82040580, + 0x000000a0, 0x04000004, 0x82040580, 0x000000a2, + 0x0402002b, 0x59a0140a, 0x82080480, 0x00000100, + 0x04021027, 0x59a0020b, 0x8c000500, 0x0402002e, + 0x59a00a0a, 0x800409c0, 0x04000021, 0x82040480, + 0x00000041, 0x0402101e, 0x82040c00, 0x00000003, + 0x82040d00, 0x000000fc, 0x80040904, 0x59a00407, + 0x59a01207, 0x900811c0, 0x80081540, 0x59a00409, + 0x59a01a09, 0x900c19c0, 0x800c1d40, 0x0201f800, + 0x00103a00, 0x04020006, 0x4a034406, 0x00000002, + 0x4a03c014, 0x03800000, 0x0401f576, 0x832e5c00, + 0x00000004, 0x412c0000, 0x0201f800, 0x00103a25, + 0x4a01d809, 0x001025a2, 0x1c01f000, 0x4a03c014, + 0x03800000, 0x0401f56f, 0x4031d800, 0x58ef400b, + 0x58ee580d, 0x58ec0002, 0x82000580, 0x00000200, + 0x0400055c, 0x59a00c06, 0x59a0140a, 0x59a0020b, + 0x8c000500, 0x04020031, 0x832e5c00, 0x00000004, + 0x41783800, 0x59a04a0a, 0x401c0000, 0x812c0400, + 0x50004000, 0x82201d00, 0x000000ff, 0x4c040000, + 0x0401f8ac, 0x5c000800, 0x0400002d, 0x80244840, + 0x04000028, 0x80081000, 0x82201d00, 0x0000ff00, + 0x800c1910, 0x4c040000, 0x0401f8a2, 0x5c000800, + 0x04000023, 0x80244840, 0x0400001e, 0x80081000, + 0x82201d00, 0x00ff0000, 0x800c1920, 0x4c040000, + 0x0401f898, 0x5c000800, 0x04000019, 0x80244840, + 0x04000014, 0x80081000, 0x82201d00, 0xff000000, + 0x800c1930, 0x4c040000, 0x0401f88e, 0x5c000800, + 0x0400000f, 0x80244840, 0x0400000a, 0x80081000, + 0x801c3800, 0x0401f7d5, 0x59a0020a, 0x82000500, + 0x000000ff, 0x40001800, 0x0401f882, 0x04000004, + 0x4a03c014, 0x03800000, 0x0401f4da, 0x4a03c014, + 0x03800000, 0x0401f523, 0x4803c856, 0x4a03c013, + 0x03800300, 0x4a03c014, 0x03800380, 0x59a00c06, + 0x82040580, 0x000000a0, 0x04000004, 0x82040580, + 0x000000a2, 0x0402006c, 0x59a0140a, 0x82080480, + 0x00000100, 0x04021068, 0x59a0020b, 0x8c000500, + 0x0402005c, 0x59a01a0a, 0x800c19c0, 0x04000062, + 0x820c0480, 0x00000041, 0x0402105f, 0x0201f800, + 0x00103a00, 0x04020006, 0x4a034406, 0x00000002, + 0x4a03c014, 0x03800000, 0x0401f502, 0x832e5c00, + 0x00000004, 0x41783800, 0x59a04a0a, 0x401c0000, + 0x812c0400, 0x40004000, 0x4c040000, 0x4c080000, + 0x0401f874, 0x5c001000, 0x5c000800, 0x04000047, + 0x44144000, 0x80244840, 0x0400002b, 0x80081000, + 0x4c040000, 0x4c080000, 0x0401f86a, 0x5c001000, + 0x5c000800, 0x0400003d, 0x50200000, 0x801428d0, + 0x80140540, 0x44004000, 0x80244840, 0x0400001e, + 0x80081000, 0x4c040000, 0x4c080000, 0x0401f85d, + 0x5c001000, 0x5c000800, 0x04000030, 0x50200000, + 0x801428e0, 0x80140540, 0x44004000, 0x80244840, + 0x04000011, 0x80081000, 0x4c040000, 0x4c080000, + 0x0401f850, 0x5c001000, 0x5c000800, 0x04000023, + 0x50200000, 0x801428f0, 0x80140540, 0x44004000, + 0x80244840, 0x04000004, 0x80081000, 0x801c3800, + 0x0401f7cb, 0x59a00a0a, 0x82040c00, 0x00000003, + 0x82040d00, 0x000000fc, 0x80040904, 0x59a00407, + 0x59a01207, 0x900811c0, 0x80081540, 0x59a00409, + 0x59a01a09, 0x900c19c0, 0x800c1d40, 0x4a03c014, + 0x03800000, 0x412c0000, 0x0201f000, 0x00103a28, + 0x0401f830, 0x04000005, 0x48174406, 0x4a03c014, + 0x03800000, 0x0401f463, 0x4a03c014, 0x03800000, + 0x0401f4ac, 0x4a03c014, 0x03800000, 0x0401f4ad, + 0x0401f836, 0x04000010, 0x0401f862, 0x0402000f, + 0x40080800, 0x0401f85f, 0x0402000c, 0x400c0800, + 0x0401f85c, 0x04020009, 0x0401f84b, 0x42000000, + 0x00030d40, 0x80000040, 0x040207ff, 0x82000540, + 0x00000001, 0x1c01f000, 0x0401f843, 0x80000580, + 0x0401f7fd, 0x0401f821, 0x0400000a, 0x82040d40, + 0x00000001, 0x0401f84b, 0x04020007, 0x0401f87e, + 0x0401f898, 0x0401f838, 0x82000540, 0x00000001, + 0x1c01f000, 0x0401f834, 0x80000580, 0x0401f7fd, + 0x40041800, 0x0401f811, 0x0400000c, 0x0401f83d, + 0x0402000b, 0x40080800, 0x0401f83a, 0x04020008, + 0x400c0800, 0x0401ffe8, 0x04000004, 0x0401f826, + 0x82000540, 0x00000001, 0x1c01f000, 0x0401f822, + 0x80000580, 0x0401f7fd, 0x4c040000, 0x42000800, + 0x00000064, 0x4a03c013, 0x03800300, 0x80040840, + 0x04000016, 0x59e00013, 0x82000500, 0x00000300, + 0x82000580, 0x00000300, 0x040207f7, 0x42000000, + 0x00000064, 0x80000040, 0x040207ff, 0x4a03c013, + 0x01000000, 0x42000000, 0x00000064, 0x80000040, + 0x040207ff, 0x4a03c013, 0x02000000, 0x82000540, + 0x00000001, 0x0401f002, 0x80000580, 0x5c000800, + 0x1c01f000, 0x4a03c013, 0x01000000, 0x42000000, + 0x00000064, 0x80000040, 0x040207ff, 0x4a03c013, + 0x02000200, 0x42000000, 0x00000064, 0x80000040, + 0x040207ff, 0x4a03c013, 0x01000100, 0x1c01f000, + 0x42002000, 0x00000008, 0x82040500, 0x00000080, + 0x800000c2, 0x82000540, 0x01000000, 0x4803c013, + 0x42000000, 0x00000064, 0x80000040, 0x040207ff, + 0x4a03c013, 0x02000200, 0x42000000, 0x00000064, + 0x80000040, 0x040207ff, 0x4a03c013, 0x02000000, + 0x800408c2, 0x80102040, 0x040207ec, 0x4a03c013, + 0x01000100, 0x42000000, 0x00000064, 0x80000040, + 0x040207ff, 0x4a03c013, 0x02000200, 0x42000000, + 0x00000064, 0x80000040, 0x040207ff, 0x59e00013, + 0x82000500, 0x00000100, 0x4a03c013, 0x02000000, + 0x4c040000, 0x42000800, 0x00000064, 0x59e00013, + 0x82000500, 0x00000100, 0x80040840, 0x04000003, + 0x80000540, 0x040207fa, 0x80000540, 0x5c000800, + 0x1c01f000, 0x4a03c013, 0x01000100, 0x42001000, + 0x00000008, 0x80000d80, 0x42000000, 0x00000064, + 0x80000040, 0x040207ff, 0x4a03c013, 0x02000200, + 0x42000000, 0x00000064, 0x80000040, 0x040207ff, + 0x59e00013, 0x82000500, 0x00000100, 0x80000110, + 0x800408c2, 0x80040d40, 0x4a03c013, 0x02000000, + 0x80081040, 0x040207ed, 0x40042800, 0x1c01f000, + 0x4a03c013, 0x01000100, 0x42000000, 0x00000064, + 0x80000040, 0x040207ff, 0x4a03c013, 0x02000200, + 0x42000000, 0x00000064, 0x80000040, 0x040207ff, + 0x4a03c013, 0x02000000, 0x1c01f000, 0x59a00407, + 0x59a80837, 0x48035037, 0x48074407, 0x59a00a09, + 0x82040480, 0x00000014, 0x04021003, 0x42000800, + 0x000007d0, 0x59a80038, 0x48075038, 0x48034209, + 0x0201f000, 0x001022c0, 0x836c0580, 0x00000000, + 0x0400000e, 0x59a80006, 0x59a00c06, 0x80041580, + 0x82081500, 0x00000040, 0x02000000, 0x001022c0, + 0x80080580, 0x48035006, 0x0201f800, 0x00100699, + 0x0201f000, 0x001022c0, 0x59a00406, 0x59a80806, + 0x48035006, 0x80040d80, 0x8c040d0c, 0x02020800, + 0x00100699, 0x59a00207, 0x48035007, 0x59a00407, + 0x48035008, 0x0201f000, 0x001022c0, 0x800409c0, + 0x04000005, 0x4a034406, 0x00000001, 0x0201f000, + 0x0010230c, 0x0201f800, 0x0010513b, 0x04020005, + 0x4a034406, 0x00000016, 0x0201f000, 0x0010230c, + 0x836c0580, 0x00000003, 0x04000005, 0x4a034406, + 0x00000007, 0x0201f000, 0x0010230c, 0x59a00c06, + 0x82040500, 0xffffff00, 0x02020000, 0x00102310, + 0x82041580, 0x000000ff, 0x04020007, 0x59a80010, + 0x82000500, 0x000000ff, 0x82001540, 0x0000ff00, + 0x0401f011, 0x82040400, 0x0010210e, 0x50000000, + 0x80000110, 0x82000580, 0x00000080, 0x02000000, + 0x00102310, 0x59a80010, 0x82000500, 0x000000ff, + 0x80041580, 0x02000000, 0x00102310, 0x840409c0, + 0x80041540, 0x0201f800, 0x0002075a, 0x04020005, + 0x4a034406, 0x00000003, 0x0201f000, 0x0010230c, + 0x48ee6021, 0x480a621c, 0x4a02641c, 0x0000bc09, + 0x4a026406, 0x00000001, 0x0201f800, 0x00103a00, + 0x04020007, 0x0201f800, 0x0002077d, 0x4a034406, + 0x00000002, 0x0201f000, 0x0010230c, 0x497a5a04, + 0x497a5805, 0x4a025c04, 0x00008000, 0x4a01d809, + 0x001027f9, 0x492e6008, 0x42027000, 0x00000032, + 0x0201f000, 0x000207a1, 0x800409c0, 0x04000005, + 0x4a034406, 0x00000001, 0x0201f000, 0x0010230c, + 0x0201f800, 0x0010513b, 0x04020005, 0x4a034406, + 0x00000016, 0x0201f000, 0x0010230c, 0x836c0580, + 0x00000003, 0x04000005, 0x4a034406, 0x00000007, + 0x0201f000, 0x0010230c, 0x59a00c06, 0x82040500, + 0xffffff00, 0x02020000, 0x00102310, 0x82041580, + 0x000000ff, 0x04020007, 0x59a80010, 0x82000500, + 0x000000ff, 0x82001540, 0x0000ff00, 0x0401f011, + 0x82040400, 0x0010210e, 0x50000000, 0x80000110, + 0x82000580, 0x00000080, 0x02000000, 0x00102310, + 0x59a80010, 0x82000500, 0x000000ff, 0x80041580, + 0x02000000, 0x00102310, 0x840409c0, 0x80041540, + 0x0201f800, 0x0002075a, 0x04020005, 0x4a034406, + 0x00000003, 0x0201f000, 0x0010230c, 0x48ee6021, + 0x480a621c, 0x4a02641c, 0x0000bc05, 0x4a026406, + 0x00000001, 0x0201f800, 0x00103a00, 0x04020007, + 0x0201f800, 0x0002077d, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x497a5a04, 0x497a5805, + 0x4a025c04, 0x00008000, 0x4a01d809, 0x001027f9, + 0x492e6008, 0x42027000, 0x00000032, 0x0201f000, + 0x000207a1, 0x592c0005, 0x82000580, 0x01000000, + 0x02020000, 0x001022c0, 0x4a034406, 0x00000004, + 0x0201f000, 0x0010230c, 0x497b4406, 0x497b4207, + 0x0201f800, 0x00103b25, 0x04000008, 0x59a80066, + 0x59a8086a, 0x80040480, 0x59a80867, 0x48074406, + 0x80041480, 0x480b4207, 0x49674407, 0x59a8000e, + 0x48034209, 0x495f4409, 0x59a80020, 0x4803420b, + 0x0201f000, 0x001022c0, 0x800409c0, 0x04000005, + 0x4a034406, 0x00000001, 0x0201f000, 0x0010230c, + 0x59a00406, 0x8c000500, 0x0402000f, 0x59a80069, + 0x81640480, 0x04001008, 0x59a8000b, 0x81500580, + 0x04000009, 0x59a8006a, 0x59a81066, 0x80080580, + 0x04000005, 0x4a034406, 0x00000018, 0x0201f000, + 0x0010230c, 0x82000540, 0x00000001, 0x0201f800, + 0x001015fe, 0x0201f800, 0x00103c80, 0x0201f000, + 0x001022c0, 0x4803c856, 0x800409c0, 0x02020000, + 0x00102314, 0x59a00406, 0x8c00051e, 0x04000008, + 0x4803c856, 0x59a0020b, 0x82000480, 0x00000800, + 0x04001015, 0x0201f000, 0x00102310, 0x4803c856, + 0x59a0020b, 0x599c0a01, 0x80040480, 0x04021003, + 0x0201f000, 0x00102310, 0x59a8000e, 0x81640580, + 0x04000009, 0x4a034406, 0x00000018, 0x0201f000, + 0x0010230c, 0x4a034406, 0x00000005, 0x0201f000, + 0x0010230c, 0x59a80026, 0x8c00050a, 0x040007fa, + 0x59a00406, 0x8c00051e, 0x04000036, 0x0201f800, + 0x0002075a, 0x040007f4, 0x0201f800, 0x00103a00, + 0x040007f1, 0x497a5a04, 0x59a00406, 0x4802620a, + 0x59a00209, 0x4802640a, 0x59a00409, 0x4802620b, + 0x59a0020d, 0x4802620c, 0x59a0040d, 0x4802640c, + 0x59a0020e, 0x4802620d, 0x59a0040e, 0x4802640d, + 0x59a00210, 0x4802620e, 0x59a00410, 0x4802640e, + 0x59a0020b, 0x82000500, 0x0000fffc, 0x80000104, + 0x4802640b, 0x0401f9d9, 0x040007d7, 0x48ee6021, + 0x58ee580d, 0x5930020e, 0x59301c0e, 0x900c19c0, + 0x800c1d40, 0x5930020c, 0x5930140c, 0x900811c0, + 0x80081540, 0x592c0a05, 0x832c0400, 0x00000006, + 0x0201f800, 0x00103a25, 0x4a01d809, 0x001029e5, + 0x4a034000, 0x00000001, 0x49334001, 0x1c01f000, + 0x0201f800, 0x00106c55, 0x0201f800, 0x00100ae0, + 0x0401f86d, 0x497b5057, 0x4201d000, 0x00002710, + 0x0201f800, 0x001060c6, 0x59c40880, 0x4c040000, + 0x59c408a3, 0x4c040000, 0x497b4002, 0x0401f876, + 0x0401f893, 0x4a03a005, 0x10000000, 0x0401f8b4, + 0x0401f901, 0x04000048, 0x59c80001, 0x800001c0, + 0x040007fc, 0x59c80018, 0x82000500, 0xf0000000, + 0x59c00808, 0x82040d00, 0x0fffffff, 0x80040540, + 0x48038008, 0x0201f800, 0x00100ec1, 0x59c00006, + 0x4a038006, 0x10000000, 0x59c00009, 0x82000d00, + 0x00e00000, 0x04020024, 0x4a03900d, 0x00000000, + 0x59c80020, 0x82000500, 0xff000000, 0x82000580, + 0x32000000, 0x0402001c, 0x4a03900d, 0x00000001, + 0x59c80020, 0x82000500, 0xff000000, 0x82000580, + 0xe1000000, 0x04020014, 0x4a03900d, 0x00000000, + 0x59c80020, 0x82000500, 0x00ffffff, 0x4a03900d, + 0x00000000, 0x59c80821, 0x82040d00, 0x00ffffff, + 0x80040580, 0x04020008, 0x59a80010, 0x80040580, + 0x04020005, 0x59c40005, 0x82000500, 0x000000f0, + 0x04000006, 0x4803c856, 0x0401f8d7, 0x4a035057, + 0x00000001, 0x0401f002, 0x0401f8e1, 0x42000000, + 0x00000064, 0x80000040, 0x02000800, 0x001005d8, + 0x59c00807, 0x82040d00, 0x0000000c, 0x040007fa, + 0x0401f003, 0x4a035057, 0x00000001, 0x0401f8da, + 0x0201f800, 0x00106f36, 0x0401f818, 0x4201d000, + 0x000186a0, 0x0201f800, 0x001060c6, 0x5c000800, + 0x480788a3, 0x5c000800, 0x48078880, 0x59a80057, + 0x800001c0, 0x02000000, 0x001022c0, 0x0201f000, + 0x00102318, 0x599c0201, 0x48035059, 0x41780800, + 0x42001000, 0x00003b10, 0x0201f800, 0x001066a0, + 0x480b505a, 0x1c01f000, 0x0201f800, 0x00106c4b, + 0x59b800ea, 0x82000500, 0x00000007, 0x82000580, + 0x00000003, 0x04020003, 0x4a0370e8, 0x00000001, + 0x1c01f000, 0x42038000, 0x00007700, 0x4a038006, + 0x30000000, 0x59c00007, 0x8c00050a, 0x040207fe, + 0x59c00006, 0x59a00209, 0x59a00c09, 0x900409c0, + 0x80040d40, 0x48078001, 0x59a0020e, 0x59a00c0e, + 0x900409c0, 0x80040d40, 0x48078000, 0x59a0020b, + 0x82000500, 0x0000fffc, 0x48038002, 0x48038003, + 0x48038005, 0x497b9009, 0x59e00003, 0x82000540, + 0x00008060, 0x4803c003, 0x1c01f000, 0x41780800, + 0x8007a0ca, 0x83d3a400, 0x00007600, 0x42000800, + 0x00000040, 0x0201f800, 0x00101345, 0x4a03a00a, + 0x00000001, 0x4a03a005, 0x20000000, 0x59d00006, + 0x4a03a005, 0x30000000, 0x59d00006, 0x8c00050a, + 0x040207fe, 0x59d00005, 0x59a00210, 0x59a00c10, + 0x900409c0, 0x80040d40, 0x4807a001, 0x59a0020d, + 0x59a00c0d, 0x900409c0, 0x80040d40, 0x4807a000, + 0x59a0020b, 0x82000500, 0x0000fffc, 0x4803a003, + 0x4803a002, 0x4803a008, 0x1c01f000, 0x59a00002, + 0x4803c857, 0x800001c0, 0x0402004a, 0x59a8005a, + 0x48038880, 0x59c400a3, 0x82000540, 0x00002008, + 0x8400053a, 0x480388a3, 0x59c40008, 0x8400054e, + 0x82000500, 0xffffffe1, 0x48038808, 0x59c80040, + 0x84000534, 0x48039040, 0x0401f902, 0x04020013, + 0x59a80010, 0x800000d0, 0x82000540, 0x00000011, + 0x48039120, 0x59a80010, 0x82000500, 0x00ffffff, + 0x82000540, 0x32000000, 0x48039121, 0x4a039123, + 0xe1290008, 0x59a80010, 0x82000500, 0x00ffffff, + 0x48039122, 0x0401f016, 0x59a80010, 0x82000500, + 0x000000ff, 0x900009c0, 0x840001c0, 0x80040540, + 0x82000540, 0x00000000, 0x48039120, 0x59a80010, + 0x82000500, 0x000000ff, 0x82000540, 0x01000000, + 0x48039121, 0x4a039123, 0x08210008, 0x59a80010, + 0x82000500, 0x000000ff, 0x48039122, 0x497b9124, + 0x59a80c5b, 0x80040800, 0x4807545b, 0x900409c0, + 0x82040540, 0x0000aaaa, 0x48039125, 0x497b9126, + 0x497b9127, 0x0401f8cf, 0x04020004, 0x4a039100, + 0x0000e980, 0x0401f003, 0x4a039100, 0x0000e9a0, + 0x1c01f000, 0x82000540, 0x00000001, 0x0402500d, + 0x4203e000, 0x80000000, 0x40e81000, 0x41780800, + 0x42000000, 0x00000064, 0x0201f800, 0x001066a0, + 0x59940024, 0x80080400, 0x48032824, 0x80000580, + 0x1c01f000, 0x4d900000, 0x4dd00000, 0x4da40000, + 0x4d140000, 0x417a3000, 0x0201f800, 0x001070d8, + 0x0201f800, 0x00106dc3, 0x5c022800, 0x5c034800, + 0x5c03a000, 0x5c032000, 0x1c01f000, 0x59c80007, + 0x8c000500, 0x04000003, 0x4a03900d, 0x00000030, + 0x1c01f000, 0x4a038805, 0x00020000, 0x42000800, + 0x0000003c, 0x0201f800, 0x00101345, 0x4a038891, + 0x0000ffff, 0x59c80035, 0x48039035, 0x4a03900d, + 0x00000040, 0x42038000, 0x00007700, 0x0201f800, + 0x00100ec1, 0x42038000, 0x00007720, 0x0201f800, + 0x00100ec1, 0x4a03a005, 0x20000000, 0x4a03a005, + 0x30000000, 0x59d00806, 0x8c040d0a, 0x040207fe, + 0x1c01f000, 0x4d300000, 0x4031d800, 0x58ef400b, + 0x58ee580d, 0x58ec0002, 0x82000580, 0x00000200, + 0x5c026000, 0x02000000, 0x00102304, 0x4d300000, + 0x59a26001, 0x59a00000, 0x4000b000, 0x80000000, + 0x48034000, 0x592c0001, 0x80000540, 0x0400001e, + 0x40025800, 0x8058b040, 0x040207fb, 0x58ec1007, + 0x58ec1808, 0x592c0a05, 0x4d2c0000, 0x58ec000d, + 0x40025800, 0x592c0204, 0x5c025800, 0x82000580, + 0x00000103, 0x04000008, 0x832c0400, 0x00000006, + 0x0201f800, 0x00103a25, 0x4a01d809, 0x001029e5, + 0x0401f007, 0x832c0400, 0x00000006, 0x0201f800, + 0x00103a28, 0x4a01d809, 0x001029e5, 0x5c026000, + 0x1c01f000, 0x58ec000d, 0x40025800, 0x592c0204, + 0x82000580, 0x00000103, 0x04020006, 0x0201f800, + 0x0002077d, 0x5c026000, 0x0201f000, 0x001022c0, + 0x58ec000d, 0x40025800, 0x592c0404, 0x8400055e, + 0x48025c04, 0x42028800, 0x000007fd, 0x42003000, + 0x00fffffd, 0x0201f800, 0x001045a6, 0x04000003, + 0x80000580, 0x0401f004, 0x59a26001, 0x0201f800, + 0x0010937d, 0x5c026000, 0x02000000, 0x0010230c, + 0x4d300000, 0x4a01d809, 0x00102a38, 0x0401f7dc, + 0x592c0005, 0x82000580, 0x01000000, 0x02000000, + 0x00102318, 0x4d300000, 0x59a26001, 0x5930020b, + 0x59301c0a, 0x900001c0, 0x800c1d40, 0x5930040d, + 0x5930120d, 0x900001c0, 0x80081540, 0x592c0a05, + 0x832c0400, 0x00000006, 0x0201f800, 0x00103a28, + 0x4a01d809, 0x001029e5, 0x4a034000, 0x00000001, + 0x5c026000, 0x1c01f000, 0x4933c857, 0x4c300000, + 0x5930040b, 0x82000c80, 0x0000000e, 0x04001004, + 0x4a025a05, 0x0000000e, 0x0401f003, 0x48025a05, + 0x0401f00c, 0x800409c0, 0x0400000a, 0x4c040000, + 0x0201f800, 0x00103a00, 0x5c000800, 0x04000003, + 0x40040000, 0x0401f7f0, 0x80000580, 0x0401f003, + 0x82000540, 0x00000001, 0x5c006000, 0x1c01f000, + 0x59a00206, 0x82000580, 0x00000044, 0x1c01f000, + 0x4807c857, 0x800409c0, 0x0400000c, 0x0201f800, + 0x00101650, 0x04020009, 0x42000000, 0x00000002, + 0x0201f800, 0x0010188c, 0x42000000, 0x00000002, + 0x0201f800, 0x00101821, 0x59a00406, 0x82000500, + 0x00000007, 0x0c01f001, 0x00102a8c, 0x00102aa1, + 0x00102ab7, 0x00102a8a, 0x00102a8a, 0x00102a8a, + 0x00102a8a, 0x00102a8a, 0x0201f000, 0x00102310, + 0x42000800, 0x000000c0, 0x0201f800, 0x0010193f, + 0x82040540, 0x00000002, 0x42000800, 0x000000c0, + 0x0201f800, 0x00101944, 0x42000800, 0x00000000, + 0x0201f800, 0x0010193f, 0x82040540, 0x00000008, + 0x42000800, 0x00000000, 0x0201f800, 0x00101944, + 0x0401f00b, 0x42000800, 0x000000c0, 0x0201f800, + 0x0010193f, 0x82040540, 0x00000001, 0x42000800, + 0x000000c0, 0x0201f800, 0x00101944, 0x59c80040, + 0x4c000000, 0x59a80010, 0x4c000000, 0x59c400a3, + 0x4c000000, 0x59c40008, 0x4c000000, 0x0401f911, + 0x04000021, 0x0201f800, 0x001005d8, 0x59a80821, + 0x800409c0, 0x02020000, 0x00102314, 0x0201f800, + 0x0010513b, 0x04020005, 0x4a034406, 0x00000016, + 0x0201f000, 0x0010230c, 0x836c0580, 0x00000003, + 0x02020000, 0x00102314, 0x59c408a4, 0x82040d00, + 0x0000000f, 0x82040580, 0x00000000, 0x02020000, + 0x00102314, 0x59c80040, 0x4c000000, 0x59a80010, + 0x4c000000, 0x59c400a3, 0x4c000000, 0x59c40008, + 0x4c000000, 0x59c40080, 0x4c000000, 0x59a0020f, + 0x59a0bc0f, 0x905cb9c0, 0x805cbd40, 0x41784800, + 0x41785000, 0x41785800, 0x41789000, 0x41789800, + 0x0401fe21, 0x0201f800, 0x00106c55, 0x0201f800, + 0x00100ae0, 0x4178c000, 0x497b4002, 0x0401f95c, + 0x0401f9aa, 0x59a0020c, 0x59a00c0c, 0x80040d40, + 0x04000002, 0x0401f9fb, 0x0401f9fa, 0x0401fe68, + 0x8060c1c0, 0x04020014, 0x0401fa98, 0x0401feb2, + 0x0402000e, 0x0201f800, 0x001018d3, 0x04020008, + 0x4a034406, 0x00000017, 0x0201f800, 0x0010230c, + 0x4203e000, 0x50000000, 0x0401f000, 0x42005800, + 0x0000aaaa, 0x0401f058, 0x59c80001, 0x800001c0, + 0x040007ee, 0x59c80801, 0x800409c0, 0x04000006, + 0x0401fa70, 0x40240000, 0x80280540, 0x802c0540, + 0x0402004d, 0x59a00002, 0x82000580, 0xfeedbeef, + 0x04000004, 0x42008800, 0x10000000, 0x0401f003, + 0x42008800, 0x10000004, 0x0401fa19, 0x4a034002, + 0xfeedbeef, 0x0401fa71, 0x0401fa97, 0x0401fea8, + 0x59c40005, 0x8c000534, 0x04000004, 0x42005800, + 0x0000bbbb, 0x0401f038, 0x0401fe83, 0x04020007, + 0x42005800, 0x0000cccc, 0x485f420f, 0x905cb9c0, + 0x485f440f, 0x0401f030, 0x59a0040c, 0x800001c0, + 0x0400000e, 0x59a26000, 0x5930000d, 0x800001c0, + 0x040207be, 0x59a26001, 0x5930080d, 0x800409c0, + 0x040207ba, 0x804891c0, 0x040207b8, 0x804c99c0, + 0x040207b6, 0x0401f87a, 0x805cb840, 0x04000005, + 0x40240000, 0x80280540, 0x802c0540, 0x0402001a, + 0x42000000, 0x00030d40, 0x80000040, 0x04020012, + 0x59c00007, 0x82000500, 0x000501c0, 0x0402000b, + 0x0201f800, 0x001018d3, 0x04020008, 0x4a034406, + 0x00000017, 0x0201f800, 0x0010230c, 0x4203e000, + 0x50000000, 0x0401f000, 0x42005800, 0x0000dddd, + 0x0401f005, 0x59c00807, 0x82040d00, 0x0000000c, + 0x040007ea, 0x0401fe5c, 0x59a0040c, 0x800001c0, + 0x04000002, 0x0401f856, 0x0401fe6b, 0x40240000, + 0x80280540, 0x802c0540, 0x04020003, 0x805cb9c0, + 0x04020781, 0x0201f800, 0x00106f36, 0x0401fda3, + 0x4201d000, 0x000186a0, 0x0201f800, 0x001060c6, + 0x5c000800, 0x48078880, 0x5c000800, 0x48078808, + 0x5c000800, 0x480788a3, 0x5c000800, 0x48075010, + 0x5c000800, 0x48079040, 0x0201f800, 0x00100969, + 0x59a00406, 0x82000500, 0x00000003, 0x82000580, + 0x00000002, 0x0400002c, 0x42000800, 0x000000c0, + 0x0201f800, 0x0010193f, 0x82040500, 0xfffffffc, + 0x42000800, 0x000000c0, 0x0201f800, 0x00101944, + 0x42000800, 0x00000000, 0x0201f800, 0x0010193f, + 0x82040500, 0xfffffff7, 0x42000800, 0x00000000, + 0x0201f800, 0x00101944, 0x42000800, 0x00000000, + 0x0201f800, 0x0010193f, 0x82040500, 0xfffffffb, + 0x42000800, 0x00000000, 0x0201f800, 0x00101944, + 0x4a0388a7, 0x0000f7f7, 0x42006000, 0xbeffffff, + 0x42006800, 0x80018000, 0x0201f800, 0x0010427d, + 0x42006000, 0xfffeffff, 0x41786800, 0x0201f800, + 0x0010427d, 0x402c0000, 0x80280540, 0x80240540, + 0x02000000, 0x001022c0, 0x48274406, 0x482b4207, + 0x482f4407, 0x0201f000, 0x0010231c, 0x59a26000, + 0x813261c0, 0x0400000e, 0x59325808, 0x812e59c0, + 0x0400000b, 0x0201f800, 0x0002077d, 0x0201f800, + 0x001007fd, 0x59a26001, 0x59325808, 0x0201f800, + 0x0002077d, 0x0201f800, 0x001007fd, 0x1c01f000, + 0x42000800, 0x000000ef, 0x0201f800, 0x001015eb, + 0x59c400a3, 0x8400055a, 0x8400053a, 0x480388a3, + 0x0201f800, 0x0010163b, 0x0402000a, 0x42000000, + 0x00000001, 0x0201f800, 0x0010188c, 0x42000000, + 0x00000001, 0x0201f800, 0x00101821, 0x0401f013, + 0x0201f800, 0x00101642, 0x04020008, 0x41780000, + 0x0201f800, 0x0010188c, 0x41780000, 0x0201f800, + 0x00101821, 0x0401f009, 0x42000000, 0x00000002, + 0x0201f800, 0x0010188c, 0x42000000, 0x00000002, + 0x0201f800, 0x00101821, 0x42000800, 0x00000000, + 0x0201f800, 0x0010193f, 0x82040540, 0x00000004, + 0x42000800, 0x00000000, 0x0201f800, 0x00101944, + 0x4201d000, 0x00000014, 0x0201f800, 0x0010608e, + 0x59c40008, 0x8400054e, 0x82000500, 0xffffffe1, + 0x48038808, 0x4a0388a7, 0x0000f7f7, 0x42001000, + 0x04000001, 0x0201f800, 0x0010193d, 0x42006000, + 0xbe20bfff, 0x42006800, 0x80018000, 0x0201f800, + 0x0010427d, 0x42006000, 0xfffeffff, 0x41786800, + 0x0201f800, 0x0010427d, 0x4200b000, 0x00001388, + 0x4201d000, 0x00000014, 0x4c580000, 0x0201f800, + 0x0010608e, 0x0201f800, 0x001018d3, 0x5c00b000, + 0x04000004, 0x8058b040, 0x040207f6, 0x0401f025, + 0x59c40005, 0x8c000534, 0x04020007, 0x59c400a4, + 0x82000500, 0x0000000f, 0x82000580, 0x00000008, + 0x0402001c, 0x42006000, 0x00020000, 0x0201f800, + 0x00104282, 0x4201d000, 0x00000064, 0x0201f800, + 0x0010608e, 0x42006000, 0xfeffffff, 0x42006800, + 0x02000000, 0x0201f800, 0x0010427d, 0x42006000, + 0xfdffffff, 0x41786800, 0x0201f800, 0x0010427d, + 0x4a038805, 0x04000001, 0x59c400a4, 0x82000500, + 0x0000000f, 0x82000580, 0x00000000, 0x04000003, + 0x82000540, 0x00000001, 0x1c01f000, 0x4803c856, + 0x42038000, 0x00007700, 0x0201f800, 0x00100ec1, + 0x59c00006, 0x59a0040c, 0x800001c0, 0x0400003f, + 0x59a03c0c, 0x59a00209, 0x59a01c09, 0x900c19c0, + 0x800c1d40, 0x59a0020e, 0x59a0240e, 0x901021c0, + 0x80102540, 0x59a0020b, 0x82000500, 0x0000fffc, + 0x59a0140b, 0x900811c0, 0x80081540, 0x480b8003, + 0x0201f800, 0x0002075a, 0x02000800, 0x001005d8, + 0x49334000, 0x0201f800, 0x001007e4, 0x4a025a04, + 0x00000018, 0x4a025805, 0x00abcdef, 0x492e6008, + 0x492e600b, 0x481e600d, 0x4a02600c, 0x00000004, + 0x832c0400, 0x00000011, 0x4802600a, 0x42001000, + 0x0000000c, 0x821c0d80, 0x00000001, 0x04000004, + 0x801c3840, 0x0401f963, 0x0401f004, 0x41783800, + 0x0401f960, 0x0401f011, 0x821c0c80, 0x00000005, + 0x04001005, 0x40043800, 0x42001000, 0x0000003c, + 0x0401f006, 0x80001580, 0x82081400, 0x0000000c, + 0x801c3840, 0x040207fd, 0x832c0400, 0x00000005, + 0x0401f950, 0x040207f1, 0x497b9009, 0x59e00003, + 0x82000540, 0x00008060, 0x4803c003, 0x4a038009, + 0x00e00000, 0x1c01f000, 0x4803c856, 0x41780800, + 0x8007a0ca, 0x83d3a400, 0x00007600, 0x42000800, + 0x00000040, 0x0201f800, 0x00101345, 0x4a03a00a, + 0x00000001, 0x4a03a005, 0x20000000, 0x59d00006, + 0x4a03a005, 0x30000000, 0x59d00006, 0x8c00050a, + 0x040207fe, 0x59d00005, 0x59a0020c, 0x800001c0, + 0x0400003f, 0x59a03a0c, 0x59a00210, 0x59a01c10, + 0x900c19c0, 0x800c1d40, 0x59a0020d, 0x59a0240d, + 0x901021c0, 0x80102540, 0x59a0120b, 0x82081500, + 0x0000fffc, 0x59a0040b, 0x900001c0, 0x80081540, + 0x480ba003, 0x0201f800, 0x0002075a, 0x02000800, + 0x001005d8, 0x49334001, 0x0201f800, 0x001007e4, + 0x4a025a04, 0x00000018, 0x4a025805, 0x00abcdef, + 0x492e6008, 0x492e600b, 0x481e600d, 0x4a02600c, + 0x00000004, 0x832c0400, 0x00000011, 0x4802600a, + 0x42001000, 0x0000000c, 0x821c0d80, 0x00000001, + 0x04000004, 0x801c3840, 0x0401f906, 0x0401f004, + 0x41783800, 0x0401f903, 0x0401f011, 0x821c0c80, + 0x00000005, 0x04001005, 0x40043800, 0x42001000, + 0x0000003c, 0x0401f006, 0x80001580, 0x82081400, + 0x0000000c, 0x801c3840, 0x040207fd, 0x832c0400, + 0x00000005, 0x0401f8f3, 0x040207f1, 0x1c01f000, + 0x4803c856, 0x59a0020c, 0x800001c0, 0x04000024, + 0x824c0580, 0x00000002, 0x04000040, 0x59a26001, + 0x5930380d, 0x801c39c0, 0x0400003c, 0x801c3840, + 0x481e600d, 0x5932580b, 0x5930080a, 0x50042000, + 0x58041801, 0x58041002, 0x82081500, 0xfffffffc, + 0x5930000c, 0x80000000, 0x82000d80, 0x00000005, + 0x04020009, 0x497a600c, 0x592e5801, 0x812e59c0, + 0x0400001a, 0x492e600b, 0x832c0c00, 0x00000005, + 0x0401f005, 0x4802600c, 0x5930080a, 0x82040c00, + 0x00000003, 0x4806600a, 0x0401f010, 0x59a0120b, + 0x82081500, 0x0000fffc, 0x59a0040b, 0x900001c0, + 0x80081540, 0x480ba003, 0x59a0020d, 0x59a0240d, + 0x901021c0, 0x80102540, 0x59a00210, 0x59a01c10, + 0x900c19c0, 0x800c1d40, 0x4201d000, 0x00003a98, + 0x0201f800, 0x001060c6, 0x480ba002, 0x59a80059, + 0x4803a008, 0x4813a000, 0x480fa001, 0x4a03a005, + 0x10000000, 0x02005800, 0x001005d8, 0x804c9800, + 0x82000540, 0x00000001, 0x1c01f000, 0x4847c857, + 0x59a0040c, 0x800001c0, 0x04000024, 0x82480580, + 0x00000002, 0x04000042, 0x59a26000, 0x5930380d, + 0x801c39c0, 0x0400003e, 0x801c3840, 0x481e600d, + 0x5932580b, 0x5930080a, 0x50042000, 0x58041801, + 0x58041002, 0x82081500, 0xfffffffc, 0x5930000c, + 0x80000000, 0x82000d80, 0x00000005, 0x04020009, + 0x497a600c, 0x592e5801, 0x812e59c0, 0x0400001d, + 0x492e600b, 0x832c0c00, 0x00000005, 0x0401f005, + 0x4802600c, 0x5930080a, 0x82040c00, 0x00000003, + 0x4806600a, 0x0401f013, 0x82440580, 0x10000000, + 0x0402001f, 0x59a0020e, 0x59a0240e, 0x901021c0, + 0x80102540, 0x59a00209, 0x59a01c09, 0x900c19c0, + 0x800c1d40, 0x59a0020b, 0x82000500, 0x0000fffc, + 0x59a0140b, 0x900811c0, 0x80081540, 0x480b8003, + 0x48138000, 0x480f8001, 0x480b8002, 0x59c80018, + 0x82000500, 0xf0000000, 0x59c02008, 0x82102500, + 0x0fffffff, 0x80100540, 0x48038008, 0x48478006, + 0x80489000, 0x8260c540, 0x00000001, 0x1c01f000, + 0x59c00009, 0x4803c857, 0x82000d00, 0x00e00000, + 0x0400000d, 0x485f420f, 0x905cb9c0, 0x485f440f, + 0x8c00052e, 0x04000002, 0x80285000, 0x8c00052c, + 0x04000002, 0x80244800, 0x8c00052a, 0x04000002, + 0x802c5800, 0x1c01f000, 0x59a0020c, 0x800001c0, + 0x04000024, 0x59d00806, 0x4807c857, 0x8c040d3e, + 0x04000020, 0x4a03a005, 0x20000000, 0x4a03a005, + 0x30000000, 0x59d00806, 0x8c040d0a, 0x040207fe, + 0x824c0480, 0x00000003, 0x02021800, 0x001005d8, + 0x404c0000, 0x0c01f001, 0x00102da1, 0x00102da3, + 0x00102da9, 0x0201f800, 0x001005d8, 0x80000040, + 0x40009800, 0x0401ff43, 0x0400000a, 0x0401ff41, + 0x0401f008, 0x80000040, 0x40009800, 0x59d00806, + 0x4807c857, 0x8c040d3e, 0x040207e3, 0x0401ff39, + 0x1c01f000, 0x59a0040c, 0x800001c0, 0x04000024, + 0x59c00807, 0x4807c857, 0x8c040d3e, 0x04000020, + 0x59c00807, 0x4a038006, 0x20000000, 0x82480480, + 0x00000003, 0x02021800, 0x001005d8, 0x40480000, + 0x0c01f001, 0x00102dc4, 0x00102dc6, 0x00102dce, + 0x0201f800, 0x001005d8, 0x80000040, 0x40009000, + 0x42008800, 0x10000004, 0x0401ff65, 0x0400000c, + 0x0401ff63, 0x0401f00a, 0x80000040, 0x40009000, + 0x59c00807, 0x4807c857, 0x8c040d3e, 0x040207e5, + 0x42008800, 0x10000004, 0x0401ff59, 0x1c01f000, + 0x492fc857, 0x4000a800, 0x4a03b805, 0x20000000, + 0x59dc0006, 0x4a03b805, 0x30000000, 0x4813b800, + 0x480fb801, 0x480bb802, 0x4857b803, 0x4a03b805, + 0x30000002, 0x59dc0006, 0x4a03b805, 0x70000001, + 0x59dc0006, 0x4a03b805, 0x10000000, 0x59dc0006, + 0x8c00053e, 0x040007fe, 0x4a03b805, 0x20000000, + 0x59dc0006, 0x59dc2000, 0x59dc1801, 0x801c39c0, + 0x0400000a, 0x4d2c0000, 0x0201f800, 0x001007e4, + 0x5c000800, 0x02000800, 0x001005d8, 0x4a025a04, + 0x0000000a, 0x492c0801, 0x1c01f000, 0x42006000, + 0x00102fb2, 0x0201f800, 0x00101345, 0x4a03902c, + 0x00200000, 0x4200b000, 0x000001f4, 0x59c8002c, + 0x8c00052c, 0x04000007, 0x8058b040, 0x040207fc, + 0x42000000, 0x00004003, 0x41781000, 0x0401f196, + 0x50301000, 0x41784800, 0x4a03902d, 0x00008000, + 0x4200b000, 0x000001f4, 0x59c8002c, 0x8c000534, + 0x04000007, 0x8058b040, 0x040207fc, 0x42000000, + 0x00004003, 0x41781000, 0x0401f187, 0x0401f8f8, + 0x80244800, 0x40240000, 0x82000580, 0x000003b1, + 0x040207fb, 0x0401f988, 0x41784800, 0x0401f920, + 0x80244800, 0x40240000, 0x82000580, 0x000003b1, + 0x040207fb, 0x80306000, 0x82300580, 0x00102fb4, + 0x040207e0, 0x59a80863, 0x800409c0, 0x04000007, + 0x42000000, 0x00004004, 0x42001000, 0x00000002, + 0x59a81862, 0x0401f16c, 0x42006000, 0x00102fb2, + 0x4a035064, 0x00000004, 0x50301000, 0x41784800, + 0x4a03902d, 0x00004000, 0x4200b000, 0x000001f4, + 0x59c8002c, 0x8c000532, 0x04000007, 0x8058b040, + 0x040207fc, 0x42000000, 0x00004003, 0x41781000, + 0x0401f159, 0x0401f8ca, 0x80244800, 0x40240000, + 0x82000580, 0x00000154, 0x040207fb, 0x0401f95a, + 0x41784800, 0x0401f8f2, 0x80244800, 0x40240000, + 0x82000580, 0x00000154, 0x040207fb, 0x80306000, + 0x82300580, 0x00102fb4, 0x040207e0, 0x59a80863, + 0x800409c0, 0x04000007, 0x42000000, 0x00004004, + 0x42001000, 0x00000004, 0x59a81862, 0x0401f13e, + 0x42006000, 0x00102fb2, 0x497b5064, 0x50301000, + 0x41784800, 0x4a03902d, 0x00001000, 0x4200b000, + 0x000001f4, 0x59c8002c, 0x8c00052e, 0x04000007, + 0x8058b040, 0x040207fc, 0x42000000, 0x00004003, + 0x41781000, 0x0401f12c, 0x0401f89d, 0x80244800, + 0x40240000, 0x82000580, 0x00000088, 0x040207fb, + 0x0401f92d, 0x41784800, 0x0401f8c5, 0x80244800, + 0x40240000, 0x82000580, 0x00000088, 0x040207fb, + 0x80306000, 0x82300580, 0x00102fb4, 0x040207e0, + 0x59a80863, 0x800409c0, 0x04000007, 0x42000000, + 0x00004004, 0x42001000, 0x00000001, 0x59a81862, + 0x0401f111, 0x42006000, 0x00102fb2, 0x50301000, + 0x41784800, 0x4a03902d, 0x00000800, 0x0401f87c, + 0x80244800, 0x40240000, 0x82000580, 0x00000018, + 0x040207fb, 0x0401f90c, 0x41784800, 0x0401f8a4, + 0x80244800, 0x40240000, 0x82000580, 0x00000018, + 0x040207fb, 0x80306000, 0x82300580, 0x00102fb4, + 0x040207eb, 0x59a80863, 0x800409c0, 0x04000007, + 0x42000000, 0x00004004, 0x42001000, 0x00000010, + 0x59a81862, 0x0401f0f0, 0x42006000, 0x00102fb2, + 0x50301000, 0x41784800, 0x4a03902d, 0x00000400, + 0x0401f85b, 0x80244800, 0x40240000, 0x82000580, + 0x00000088, 0x040207fb, 0x0401f8eb, 0x41784800, + 0x0401f883, 0x80244800, 0x40240000, 0x82000580, + 0x00000088, 0x040207fb, 0x80306000, 0x82300580, + 0x00102fb4, 0x040207eb, 0x59a80863, 0x800409c0, + 0x04000007, 0x42000000, 0x00004004, 0x42001000, + 0x00000008, 0x59a81862, 0x0401f0cf, 0x42006000, + 0x00102fb2, 0x50301000, 0x41784800, 0x4a03902d, + 0x00002000, 0x4200b000, 0x000001f4, 0x59c8002c, + 0x8c000530, 0x04000007, 0x8058b040, 0x040207fc, + 0x42000000, 0x00004003, 0x41781000, 0x0401f0be, + 0x59c8002c, 0x82000500, 0xffe0ffff, 0x82080d00, + 0x001f0000, 0x80040540, 0x4803902c, 0x0401f828, + 0x80244800, 0x40240000, 0x82000580, 0x00000110, + 0x040207fb, 0x0401f8b8, 0x41784800, 0x0401f850, + 0x59c80034, 0x82080d00, 0x001f0000, 0x82000500, + 0x001f0000, 0x80040580, 0x04000006, 0x59a80063, + 0x80000000, 0x48035063, 0x40240000, 0x48035062, + 0x80244800, 0x40240000, 0x82000580, 0x00000110, + 0x040207ef, 0x80306000, 0x82300580, 0x00102fb4, + 0x040207cd, 0x59a80863, 0x800409c0, 0x04000006, + 0x42000000, 0x00004004, 0x42001000, 0x00000020, + 0x59a81862, 0x0201f000, 0x001022c0, 0x59c8002c, + 0x82000500, 0xffff0000, 0x82080d00, 0x0000ffff, + 0x80040540, 0x4803902c, 0x40080000, 0x48039028, + 0x48039029, 0x59a80064, 0x82000580, 0x00000004, + 0x04000004, 0x40080000, 0x4803902a, 0x4803902b, + 0x59c8082d, 0x82040d00, 0xfffffc00, 0x40240000, + 0x80040d40, 0x4807902d, 0x4200b000, 0x000001f4, + 0x59c8002c, 0x82000500, 0x18000000, 0x04000007, + 0x8058b040, 0x040207fb, 0x42000000, 0x00004003, + 0x41781000, 0x0401f06c, 0x4a03902e, 0x00000001, + 0x4200b000, 0x000001f4, 0x59c8002e, 0x8c000500, + 0x04000006, 0x8058b040, 0x040207fc, 0x42000000, + 0x00004003, 0x0401f060, 0x1c01f000, 0x41783800, + 0x59c8082d, 0x82040d00, 0xfffffc00, 0x40240000, + 0x80040d40, 0x4807902d, 0x4200b000, 0x000001f4, + 0x59c8002c, 0x82000500, 0x18000000, 0x04000007, + 0x8058b040, 0x040207fb, 0x42000000, 0x00004003, + 0x41781000, 0x0401f04c, 0x59c80030, 0x59c80830, + 0x80040580, 0x040207fd, 0x40041800, 0x59c80031, + 0x59c80831, 0x80040580, 0x040207fd, 0x40042000, + 0x59c80032, 0x59c80832, 0x80040580, 0x040207fd, + 0x40042800, 0x59c80033, 0x59c80833, 0x80040580, + 0x040207fd, 0x40043000, 0x400c0000, 0x80080580, + 0x04000002, 0x801c3800, 0x40100000, 0x80080580, + 0x04000002, 0x801c3800, 0x59a80064, 0x82000580, + 0x00000004, 0x04000009, 0x40140000, 0x80080580, + 0x04000002, 0x801c3800, 0x40180000, 0x80080580, + 0x04000002, 0x801c3800, 0x59a80064, 0x82000580, + 0x00000004, 0x0400000d, 0x59c80034, 0x59c80834, + 0x80040580, 0x040207fd, 0x82040500, 0x0000ffff, + 0x82080d00, 0x0000ffff, 0x80040580, 0x0400000e, + 0x801c3800, 0x0401f00c, 0x59c80034, 0x59c80834, + 0x80040580, 0x040207fd, 0x82040500, 0x000000ff, + 0x82080d00, 0x000000ff, 0x80040580, 0x04000002, + 0x801c3800, 0x801c39c0, 0x04000006, 0x59a80063, + 0x801c0400, 0x48035063, 0x40240000, 0x48035062, + 0x1c01f000, 0x48034206, 0x48074406, 0x480b4207, + 0x480f4407, 0x48134208, 0x48174408, 0x0201f000, + 0x001022c3, 0x42000000, 0x00600000, 0x80000040, + 0x040207ff, 0x1c01f000, 0x5a5a5a5a, 0xa5a5a5a5, + 0x59a00c0a, 0x800409c0, 0x02000000, 0x00102310, + 0x82040480, 0x00000021, 0x02021000, 0x00102310, + 0x82040480, 0x00000011, 0x04001003, 0x42000800, + 0x00000010, 0x59a00208, 0x59a01407, 0x900811c0, + 0x80081540, 0x59a00207, 0x59a01c06, 0x900c19c0, + 0x800c1d40, 0x0201f800, 0x00103a00, 0x04000006, + 0x0201f800, 0x00103a25, 0x4a01d809, 0x00102fd5, + 0x1c01f000, 0x4a034406, 0x00000002, 0x0201f000, + 0x0010230c, 0x4031d800, 0x58ef400b, 0x58ec0002, + 0x82000580, 0x00000200, 0x02000000, 0x00102304, + 0x59a00c0a, 0x82040480, 0x00000011, 0x04001003, + 0x42000800, 0x00000010, 0x59a0040b, 0x59a0120b, + 0x900811c0, 0x80081540, 0x59a00209, 0x59a01c08, + 0x900c19c0, 0x800c1d40, 0x58ec0003, 0x0201f800, + 0x00103a28, 0x4a01d809, 0x00102ff0, 0x1c01f000, + 0x4031d800, 0x58ef400b, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x59a00c0a, + 0x82040480, 0x00000011, 0x02001000, 0x001022c0, + 0x82040c80, 0x00000010, 0x59a00208, 0x59a01407, + 0x900811c0, 0x80081540, 0x59a00207, 0x59a01c06, + 0x900c19c0, 0x800c1d40, 0x82081400, 0x00000040, + 0x58ec0003, 0x0201f800, 0x00103a25, 0x4a01d809, + 0x0010300e, 0x1c01f000, 0x4031d800, 0x58ef400b, + 0x58ec0002, 0x82000580, 0x00000200, 0x02000000, + 0x00102304, 0x59a0040a, 0x82000c80, 0x00000010, + 0x59a0040b, 0x59a0120b, 0x900811c0, 0x80081540, + 0x59a00209, 0x59a01c08, 0x900c19c0, 0x800c1d40, + 0x82081400, 0x00000040, 0x58ec0003, 0x0201f800, + 0x00103a28, 0x4a01d809, 0x001022b9, 0x1c01f000, + 0x48efc857, 0x59a00207, 0x59a01407, 0x900001c0, + 0x80081540, 0x59a00209, 0x59a01c09, 0x900001c0, + 0x800c1d40, 0x59a00406, 0x48034000, 0x480b4001, + 0x480f4002, 0x0201f800, 0x00103a00, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x42000800, 0x00000010, 0x0201f800, 0x00103a25, + 0x4a01d809, 0x00103043, 0x1c01f000, 0x4031d800, + 0x58ef400b, 0x58ee580d, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x48efc857, + 0x49a3c857, 0x492fc857, 0x592c0a04, 0x80040910, + 0x04020005, 0x4a034406, 0x00000019, 0x0201f000, + 0x0010230c, 0x4805d80c, 0x0401f00a, 0x4031d800, + 0x58ef400b, 0x58ec0002, 0x82000580, 0x00000200, + 0x02000000, 0x00102304, 0x48efc857, 0x49a3c857, + 0x48efc857, 0x49a3c857, 0x58ec000c, 0x80000040, + 0x04000012, 0x4801d80c, 0x0201f800, 0x00103a00, + 0x04020005, 0x4a034406, 0x00000002, 0x0201f000, + 0x0010230c, 0x42000800, 0x00000010, 0x58ec1007, + 0x58ec1808, 0x0201f800, 0x00103a25, 0x4a01d809, + 0x00103057, 0x1c01f000, 0x58ee580d, 0x48efc857, + 0x49a3c857, 0x492fc857, 0x492f3006, 0x592c0404, + 0x8400055e, 0x48025c04, 0x4a01d809, 0x00103081, + 0x1c01f000, 0x58ee580d, 0x48efc857, 0x49a3c857, + 0x492fc857, 0x592c0404, 0x8400051e, 0x48025c04, + 0x59a00000, 0x59a01001, 0x59a01802, 0x80081400, + 0x820c1c40, 0x00000000, 0x832c0400, 0x00000004, + 0x42000800, 0x00000010, 0x0201f000, 0x00103a28, + 0x800409c0, 0x04000005, 0x4a034406, 0x00000001, + 0x0201f000, 0x0010230c, 0x836c0580, 0x00000003, + 0x04000005, 0x4a034406, 0x00000007, 0x0201f000, + 0x0010230c, 0x59a0320b, 0x82183500, 0x000000ff, + 0x59a28c06, 0x0201f800, 0x00020245, 0x02020000, + 0x00102310, 0x83440580, 0x000007fd, 0x04000008, + 0x0201f800, 0x001049e7, 0x04000005, 0x4a034406, + 0x00000009, 0x0201f000, 0x0010230c, 0x0201f800, + 0x00103a00, 0x04020005, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x801831c0, 0x0400000a, + 0x412c0800, 0x0201f800, 0x00103a00, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x40065800, 0x4a025c04, 0x00008000, 0x497a5a04, + 0x0201f800, 0x00109100, 0x04020005, 0x4a034406, + 0x00000003, 0x0201f000, 0x0010230c, 0x4a01d809, + 0x001030d2, 0x1c01f000, 0x592c0005, 0x82000580, + 0x01000000, 0x04020005, 0x4a034406, 0x00000004, + 0x0201f000, 0x0010230c, 0x592c0406, 0x82002d00, + 0x0000ff00, 0x82000500, 0x000000ff, 0x80000904, + 0x80040800, 0x82040480, 0x00000006, 0x04001003, + 0x42000800, 0x00000005, 0x832ca400, 0x00000006, + 0x4050a800, 0x4004b000, 0x0201f800, 0x0010ab28, + 0x59a00407, 0x59a01207, 0x900811c0, 0x80081540, + 0x59a00409, 0x59a01a09, 0x900c19c0, 0x800c1d40, + 0x832c0400, 0x00000006, 0x4c140000, 0x0201f800, + 0x00103a28, 0x5c002800, 0x801429c0, 0x04000003, + 0x4a01d809, 0x001030ff, 0x1c01f000, 0x4031d800, + 0x58ef400b, 0x58ee580d, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x812e59c0, + 0x02000800, 0x001005d8, 0x592c0006, 0x82000500, + 0xff000000, 0x80000904, 0x800409c0, 0x02000000, + 0x00102304, 0x82040480, 0x0000000e, 0x04001003, + 0x42000800, 0x0000000d, 0x592e5801, 0x812e59c0, + 0x02000800, 0x001005d8, 0x832ca400, 0x00000005, + 0x4050a800, 0x4004b000, 0x0201f800, 0x0010ab28, + 0x58ec1007, 0x58ec1808, 0x832c0400, 0x00000005, + 0x0201f000, 0x00103a28, 0x0201f800, 0x00103a00, + 0x04020005, 0x4a034406, 0x00000002, 0x0201f000, + 0x0010230c, 0x59a00c06, 0x82040500, 0x0000ff00, + 0x840001c0, 0x82001480, 0x00000007, 0x02021000, + 0x00102310, 0x0c01f001, 0x0010313d, 0x00103144, + 0x0010314b, 0x0010314b, 0x0010314b, 0x0010314d, + 0x00103152, 0x42000800, 0x0000000d, 0x42003800, + 0x00103166, 0x4a034000, 0x0010b4eb, 0x0401f013, + 0x42000800, 0x0000000d, 0x42003800, 0x00103166, + 0x4a034000, 0x0010b4f8, 0x0401f00c, 0x0201f000, + 0x00102310, 0x42000800, 0x00000008, 0x42003800, + 0x00103179, 0x0401f005, 0x42000800, 0x00000004, + 0x42003800, 0x001031c3, 0x59a00207, 0x59a01407, + 0x900001c0, 0x80081540, 0x59a00209, 0x59a01c09, + 0x900001c0, 0x800c1d40, 0x832c0400, 0x00000005, + 0x4c1c0000, 0x0201f800, 0x00103a25, 0x5c003800, + 0x481dd809, 0x1c01f000, 0x4031d800, 0x58ef400b, + 0x58ee580d, 0x58ec0002, 0x82000580, 0x00000200, + 0x02000000, 0x00102304, 0x4a03501f, 0x00000001, + 0x4200b000, 0x0000000d, 0x59a0a800, 0x832ca400, + 0x00000005, 0x0201f800, 0x0010ab17, 0x0201f000, + 0x001022c0, 0x4031d800, 0x58ef400b, 0x58ee580d, + 0x58ec0002, 0x82000580, 0x00000200, 0x02000000, + 0x00102304, 0x832ca400, 0x00000005, 0x50500000, + 0x82001500, 0x000c0016, 0x02020000, 0x00102310, + 0x82500c00, 0x00000003, 0x50040000, 0x82001500, + 0x00000001, 0x02020000, 0x00102310, 0x50500000, + 0x82001500, 0x00000028, 0x0400001d, 0x82081580, + 0x00000028, 0x02020000, 0x00102310, 0x80500800, + 0x50040000, 0x82001500, 0x00000013, 0x82081580, + 0x00000013, 0x02020000, 0x00102310, 0x80040800, + 0x50040000, 0x82001500, 0x00010000, 0x82081580, + 0x00010000, 0x02020000, 0x00102310, 0x836c0580, + 0x00000000, 0x04000012, 0x599c0019, 0x8c00050e, + 0x0402000f, 0x0201f000, 0x00102310, 0x80500800, + 0x50040000, 0x82001500, 0x00000013, 0x02020000, + 0x00102310, 0x80040800, 0x50040000, 0x82001500, + 0x00010000, 0x02020000, 0x00102310, 0x4200b000, + 0x00000008, 0x4200a800, 0x0010b4e3, 0x0201f800, + 0x0010ab17, 0x0201f000, 0x001022c0, 0x4031d800, + 0x58ef400b, 0x58ee580d, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x4200b000, + 0x00000004, 0x4200a800, 0x0010b8fa, 0x832ca400, + 0x00000005, 0x0201f800, 0x0010ab17, 0x59a80005, + 0x84000550, 0x48035005, 0x0201f000, 0x001022c0, + 0x0201f800, 0x00103a00, 0x04020005, 0x4a034406, + 0x00000002, 0x0201f000, 0x0010230c, 0x59a00c06, + 0x82040500, 0x0000ff00, 0x840001c0, 0x82001480, + 0x00000006, 0x02021000, 0x00102310, 0x0c01f001, + 0x001031ee, 0x001031f3, 0x001031f8, 0x001031f8, + 0x001031f8, 0x001031fa, 0x42000800, 0x0000000d, + 0x4200a000, 0x0010b4eb, 0x0401f00c, 0x42000800, + 0x0000000d, 0x4200a000, 0x0010b4f8, 0x0401f007, + 0x0201f000, 0x00102310, 0x42000800, 0x00000008, + 0x4200a000, 0x0010b4e3, 0x4004b000, 0x832cac00, + 0x00000005, 0x0201f800, 0x0010ab17, 0x59a00207, + 0x59a01407, 0x900001c0, 0x80081540, 0x59a00209, + 0x59a01c09, 0x900001c0, 0x800c1d40, 0x832c0400, + 0x00000005, 0x0201f000, 0x00103a28, 0x836c0580, + 0x00000000, 0x04020005, 0x4a034406, 0x00000007, + 0x0201f000, 0x0010230c, 0x59a00406, 0x800001c0, + 0x0400001a, 0x59a80005, 0x8c000514, 0x04000005, + 0x42000000, 0x00000001, 0x40000800, 0x0401f003, + 0x59a00207, 0x59a80853, 0x48035053, 0x0201f800, + 0x0010163b, 0x04000022, 0x0201f800, 0x00101642, + 0x0400001f, 0x0201f800, 0x00101649, 0x0400001c, + 0x0201f800, 0x00101650, 0x04000019, 0x48075053, + 0x0201f000, 0x00102310, 0x59c40801, 0x82040d00, + 0x00018000, 0x82040580, 0x00000000, 0x04020004, + 0x4a034406, 0x00000000, 0x0401f00d, 0x82040580, + 0x00008000, 0x04020004, 0x4a034406, 0x00000001, + 0x0401f007, 0x82040580, 0x00010000, 0x02020800, + 0x001005d8, 0x4a034406, 0x00000003, 0x59a00406, + 0x82000580, 0x00000002, 0x0402001f, 0x59c40006, + 0x84000500, 0x48038806, 0x0201f800, 0x00106ede, + 0x497b8880, 0x0201f800, 0x0010a9c0, 0x0201f800, + 0x0010a9ce, 0x42000000, 0x0010b8ca, 0x0201f800, + 0x0010aa47, 0x82000540, 0x00000001, 0x0201f800, + 0x0010518c, 0x4a038808, 0x00000000, 0x4202d800, + 0x00000004, 0x42001000, 0x00000001, 0x0201f800, + 0x0010193d, 0x4a035049, 0x00000001, 0x0201f800, + 0x001006d4, 0x0201f000, 0x001022c0, 0x800409c0, + 0x04000005, 0x4a034406, 0x00000001, 0x0201f000, + 0x0010230c, 0x836c0580, 0x00000003, 0x04000005, + 0x4a034406, 0x00000007, 0x0201f000, 0x0010230c, + 0x59a28c06, 0x59a0320b, 0x82183500, 0x000000ff, + 0x0201f800, 0x00020245, 0x02020000, 0x00102310, + 0x83440580, 0x000007fd, 0x04000008, 0x0201f800, + 0x001049e7, 0x04000005, 0x42000800, 0x00000009, + 0x0201f000, 0x0010230c, 0x0201f800, 0x00103a00, + 0x04020005, 0x4a034406, 0x00000002, 0x0201f000, + 0x0010230c, 0x497a5a04, 0x4a025c04, 0x00008000, + 0x0201f800, 0x00109115, 0x04020005, 0x4a034406, + 0x00000003, 0x0201f000, 0x0010230c, 0x4a01d809, + 0x0010329e, 0x1c01f000, 0x592c0005, 0x82000d00, + 0x0000ffff, 0x82000500, 0xffff0000, 0x82000580, + 0x01000000, 0x04020005, 0x4a034406, 0x00000004, + 0x0201f000, 0x0010230c, 0x80040904, 0x832ca400, + 0x00000005, 0x4050a800, 0x4004b000, 0x0201f800, + 0x0010ab28, 0x59a00207, 0x59a01407, 0x900001c0, + 0x80081540, 0x59a00209, 0x59a01c09, 0x900001c0, + 0x800c1d40, 0x832c0400, 0x00000005, 0x0201f000, + 0x00103a28, 0x496fc857, 0x836c0580, 0x00000000, + 0x04000005, 0x4a034406, 0x0000001a, 0x0201f000, + 0x0010230c, 0x0201f800, 0x0010513b, 0x02020800, + 0x00104142, 0x42000800, 0x00000020, 0x59a00407, + 0x59a01207, 0x900811c0, 0x80081540, 0x59a00409, + 0x59a01a09, 0x900c19c0, 0x800c1d40, 0x419c0000, + 0x49a3c857, 0x0201f800, 0x00103a25, 0x4a01d809, + 0x001032da, 0x1c01f000, 0x4833c857, 0x4031d800, + 0x58ef400b, 0x58ec0002, 0x82000580, 0x00000200, + 0x02000000, 0x00102304, 0x599c0200, 0x800001c0, + 0x02000000, 0x00102310, 0x59a80005, 0x8c000512, + 0x04000004, 0x599c0019, 0x8400050c, 0x48033819, + 0x0201f800, 0x001097d7, 0x59a80005, 0x8c000514, + 0x04000004, 0x599c0017, 0x84000508, 0x48033817, + 0x0201f800, 0x00103b25, 0x04020004, 0x8c00050a, + 0x02020000, 0x00102310, 0x4803c857, 0x8c000504, + 0x04020004, 0x59c408a3, 0x84040d7a, 0x480788a3, + 0x8c000502, 0x04020004, 0x59c408a3, 0x84040d08, + 0x480788a3, 0x599c0c02, 0x8c000500, 0x04020004, + 0x8c000516, 0x04000012, 0x0401f001, 0x82041480, + 0x0000007f, 0x02021000, 0x00102310, 0x82041400, + 0x0010210e, 0x50081000, 0x82081500, 0x000000ff, + 0x8c000500, 0x04020006, 0x480b5010, 0x42000800, + 0x00000003, 0x0201f800, 0x00106c78, 0x599c0019, + 0x8c00050e, 0x0402000b, 0x59a80806, 0x8c040d14, + 0x04000008, 0x42000800, 0x0010b4e3, 0x50040800, + 0x82040d00, 0x00000028, 0x02020000, 0x00102310, + 0x82000500, 0x00000030, 0x04000003, 0x80000108, + 0x0401f003, 0x42000000, 0x00000002, 0x48039040, + 0x42000800, 0x00000002, 0x82000400, 0x00103415, + 0x50001000, 0x0201f800, 0x00106c78, 0x599c0201, + 0x82000c80, 0x00000100, 0x02001000, 0x00102310, + 0x82000c80, 0x00000841, 0x02021000, 0x00102310, + 0x82000500, 0x00000007, 0x02020000, 0x00102310, + 0x599c0401, 0x80000540, 0x02000000, 0x00102310, + 0x599c0409, 0x599c0c07, 0x80040c80, 0x02021000, + 0x00102310, 0x80000040, 0x02000000, 0x00102310, + 0x599c0209, 0x599c0a07, 0x80040c80, 0x02021000, + 0x00102310, 0x80000040, 0x02000000, 0x00102310, + 0x0201f800, 0x001053cd, 0x0201f800, 0x00104cb6, + 0x599c0201, 0x48035004, 0x0201f800, 0x001012ee, + 0x599c020a, 0x800001c0, 0x04000003, 0x4803504d, + 0x0401f003, 0x4a03504d, 0x000000c8, 0x0201f800, + 0x00103b25, 0x04000004, 0x0201f800, 0x001060df, + 0x417a5000, 0x836c0580, 0x00000000, 0x04020098, + 0x599c0003, 0x599c0804, 0x9c0001c0, 0x9c0409c0, + 0x48035002, 0x48075003, 0x599c1017, 0x8c08151c, + 0x04000006, 0x599c0005, 0x599c0806, 0x9c0001c0, + 0x9c0409c0, 0x0401f003, 0x82000500, 0xf0ffffff, + 0x48035000, 0x48075001, 0x42001000, 0x0010b4eb, + 0x48001000, 0x48041001, 0x42001000, 0x0010b4f8, + 0x48001000, 0x48041001, 0x59a80005, 0x8c000514, + 0x04020015, 0x599c1019, 0x82081500, 0x0000e000, + 0x82080580, 0x00000000, 0x0402000c, 0x4a035053, + 0x00000000, 0x42000000, 0x00000001, 0x0201f800, + 0x0010188c, 0x42000000, 0x00000001, 0x0201f800, + 0x00101821, 0x0401f02b, 0x82080580, 0x00002000, + 0x0402000a, 0x4a035053, 0x00000001, 0x41780000, + 0x0201f800, 0x0010188c, 0x41780000, 0x0201f800, + 0x00101821, 0x0401f01f, 0x82080580, 0x00004000, + 0x04020006, 0x4a035053, 0x00000002, 0x4a035049, + 0x00000001, 0x0401f017, 0x82080580, 0x00006000, + 0x02020000, 0x00102310, 0x59a80858, 0x82040d80, + 0x01391077, 0x04020005, 0x59e00813, 0x8c040d00, + 0x02020000, 0x00102310, 0x4a035053, 0x00000003, + 0x42000000, 0x00000002, 0x0201f800, 0x0010188c, + 0x42000000, 0x00000002, 0x0201f800, 0x00101821, + 0x599c0019, 0x8c000520, 0x0400000d, 0x42000000, + 0x00000004, 0x42000800, 0x00000040, 0x0201f800, + 0x00101944, 0x42000000, 0x00000010, 0x42000800, + 0x000000c0, 0x0201f800, 0x00101944, 0x4a035032, + 0x0000aaaa, 0x599c1018, 0x82081500, 0x00000030, + 0x59a8006c, 0x80000540, 0x0400000c, 0x82080580, + 0x00000000, 0x02000000, 0x00102310, 0x599c1018, + 0x82081500, 0xffffffcf, 0x82081540, 0x00000010, + 0x480b3818, 0x0401f010, 0x82080d80, 0x00000000, + 0x04000007, 0x82080d80, 0x00000010, 0x0400000a, + 0x82080d80, 0x00000020, 0x04020002, 0x48075032, + 0x0201f800, 0x00103aba, 0x04000008, 0x0201f800, + 0x001015fe, 0x0201f800, 0x0010162a, 0x59a8002a, + 0x80040540, 0x4803502a, 0x49f3c857, 0x42001000, + 0x00105065, 0x0201f800, 0x00105f90, 0x42001000, + 0x00105058, 0x0201f800, 0x00106084, 0x4a038805, + 0xffffffff, 0x4a03c014, 0x00400040, 0x4a03c013, + 0x00400000, 0x0201f800, 0x001048c7, 0x59a0001d, + 0x84000540, 0x4803401d, 0x49f3c857, 0x0201f000, + 0x001022c0, 0x00000018, 0x0000000c, 0x00000018, + 0x00000020, 0x836c0580, 0x00000000, 0x04020005, + 0x42000800, 0x00000007, 0x0201f000, 0x0010230c, + 0x42000800, 0x00000020, 0x59a00407, 0x59a01207, + 0x900811c0, 0x80081540, 0x59a00409, 0x59a01a09, + 0x900c19c0, 0x800c1d40, 0x419c0000, 0x0201f000, + 0x00103a28, 0x800409c0, 0x04000005, 0x4a034406, + 0x00000001, 0x0201f000, 0x0010230c, 0x0201f800, + 0x0010513b, 0x04020005, 0x4a034406, 0x00000016, + 0x0201f000, 0x0010230c, 0x59a80013, 0x8c000500, + 0x04000011, 0x4a034406, 0x00000000, 0x42000800, + 0x00000020, 0x59a00407, 0x59a01207, 0x900811c0, + 0x80081540, 0x59a00409, 0x59a01a09, 0x900c19c0, + 0x800c1d40, 0x42000000, 0x0010be21, 0x0201f000, + 0x00103a28, 0x4a034406, 0x00000001, 0x4200b000, + 0x00000020, 0x4200a800, 0x0010be21, 0x4200a000, + 0xffffffff, 0x4450a800, 0x8054a800, 0x8058b040, + 0x040207fd, 0x4d440000, 0x4d340000, 0x42028800, + 0xffffffff, 0x42002000, 0xffffffff, 0x42003000, + 0x00000001, 0x42003800, 0x00000001, 0x42001800, + 0x0010be21, 0x59a81010, 0x82081500, 0x000000ff, + 0x40180000, 0x0c01f001, 0x0010346e, 0x00103471, + 0x00103475, 0x00103479, 0x82102500, 0xffffff00, + 0x0401f014, 0x82102500, 0xffff00ff, 0x840811c0, + 0x0401f010, 0x82102500, 0xff00ffff, 0x900811c0, + 0x0401f00c, 0x82102500, 0x00ffffff, 0x9c0801c0, + 0x80102540, 0x44101800, 0x42003000, 0xffffffff, + 0x42002000, 0xffffffff, 0x800c1800, 0x0401f003, + 0x40080000, 0x80102540, 0x81468800, 0x83442c80, + 0x0000007f, 0x04021014, 0x4c080000, 0x4c0c0000, + 0x4c180000, 0x4c1c0000, 0x0201f800, 0x00020245, + 0x5c003800, 0x5c003000, 0x5c001800, 0x5c001000, + 0x040207f2, 0x0201f800, 0x001049f3, 0x040207ef, + 0x80183000, 0x801c3800, 0x59341202, 0x40180000, + 0x0c01f7ce, 0x82100580, 0xffffffff, 0x04000002, + 0x44101800, 0x42001800, 0x0010be21, 0x500c0000, + 0x82000500, 0xffffff00, 0x801c0540, 0x44001800, + 0x5c026800, 0x5c028800, 0x42000800, 0x00000020, + 0x59a00407, 0x59a01207, 0x900811c0, 0x80081540, + 0x59a00409, 0x59a01a09, 0x900c19c0, 0x800c1d40, + 0x42000000, 0x0010be21, 0x0201f000, 0x00103a28, + 0x59a28c06, 0x59a0020b, 0x8c000500, 0x0400000e, + 0x59a01208, 0x59a00408, 0x82000500, 0x000000ff, + 0x900001c0, 0x80081540, 0x41784000, 0x0201f800, + 0x00104919, 0x04000008, 0x48034406, 0x0201f000, + 0x00102310, 0x0201f800, 0x00020245, 0x02020000, + 0x00102310, 0x0201f800, 0x00103a00, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x59a0020b, 0x8c000500, 0x04000005, 0x0201f800, + 0x001049f3, 0x02020000, 0x00103ac4, 0x59a0020b, + 0x8c000502, 0x04000019, 0x83440480, 0x000007f0, + 0x04021016, 0x0201f800, 0x001049fc, 0x04020013, + 0x497a5a04, 0x4a025c04, 0x00008000, 0x0201f800, + 0x001090e6, 0x04020005, 0x4a034406, 0x00000003, + 0x0201f000, 0x0010230c, 0x4a01d809, 0x001034f1, + 0x1c01f000, 0x59a28c06, 0x0201f800, 0x00020245, + 0x02020000, 0x00102310, 0x4200b000, 0x0000000a, + 0x4134a000, 0x832e5c00, 0x00000002, 0x412ca800, + 0x0201f800, 0x0010ab17, 0x832cac00, 0x00000006, + 0x4054a000, 0x4200b000, 0x00000004, 0x0201f800, + 0x0010ab28, 0x592c0802, 0x82040500, 0x00ff00ff, + 0x900001c0, 0x82041500, 0xff00ff00, 0x80080540, + 0x48025802, 0x592c0801, 0x82040500, 0x00ff00ff, + 0x900001c0, 0x82041500, 0xff00ff00, 0x80080540, + 0x48025801, 0x42000800, 0x0000000a, 0x59a00407, + 0x59a01207, 0x900811c0, 0x80081540, 0x59a00409, + 0x59a01a09, 0x900c19c0, 0x800c1d40, 0x412c0000, + 0x0201f000, 0x00103a28, 0x496fc857, 0x496f4406, + 0x0201f000, 0x001022c0, 0x59a28c06, 0x0201f800, + 0x00020245, 0x02020000, 0x00102310, 0x836c0580, + 0x00000003, 0x04000005, 0x4a034406, 0x00000007, + 0x0201f000, 0x0010230c, 0x83340c00, 0x00000006, + 0x59a0020b, 0x8c000500, 0x04000003, 0x83340c00, + 0x00000008, 0x58040001, 0x48034409, 0x900001c0, + 0x48034209, 0x50040000, 0x48034407, 0x900001c0, + 0x48034207, 0x59340200, 0x48034406, 0x0201f000, + 0x001022c0, 0x800409c0, 0x04000005, 0x4a034406, + 0x00000001, 0x0201f000, 0x0010230c, 0x59a0220b, + 0x8c102500, 0x0402002e, 0x8c102506, 0x04020006, + 0x59a03208, 0x82180480, 0x00000003, 0x02021000, + 0x00102310, 0x59a28c06, 0x0201f800, 0x00020245, + 0x02020000, 0x00102310, 0x0201f800, 0x001049e7, + 0x04000005, 0x4a034406, 0x00000009, 0x0201f000, + 0x0010230c, 0x0201f800, 0x00103a00, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x59a0220b, 0x8c102506, 0x04000004, 0x59343002, + 0x82183500, 0x00ffffff, 0x497a5a04, 0x4a025c04, + 0x00008000, 0x0201f800, 0x001090a8, 0x04020005, + 0x4a034406, 0x00000003, 0x0201f000, 0x0010230c, + 0x4a01d809, 0x001035d1, 0x1c01f000, 0x59a28c06, + 0x0201f800, 0x00020245, 0x02020000, 0x00102310, + 0x0201f800, 0x001049e7, 0x04000005, 0x4a034406, + 0x00000009, 0x0201f000, 0x0010230c, 0x0201f800, + 0x00103a00, 0x04020005, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x497a5a04, 0x4a025c04, + 0x00008000, 0x0201f800, 0x00103a00, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x592e5800, 0x0201f800, 0x001090bd, 0x04020005, + 0x4a034406, 0x00000003, 0x0201f000, 0x0010230c, + 0x4a01d809, 0x001035a3, 0x1c01f000, 0x592c2805, + 0x82140d80, 0x01000000, 0x04020005, 0x4a034406, + 0x00000004, 0x0201f000, 0x0010230c, 0x42000800, + 0x00000008, 0x59a00207, 0x59a01407, 0x900001c0, + 0x80081540, 0x59a00209, 0x59a01c09, 0x900001c0, + 0x800c1d40, 0x832c0400, 0x00000005, 0x0201f800, + 0x00103a28, 0x8c142d00, 0x04000003, 0x4a01d809, + 0x001035be, 0x1c01f000, 0x4031d800, 0x58ef400b, + 0x58ee580e, 0x58ec0002, 0x82000580, 0x00000200, + 0x02000000, 0x00102304, 0x812e59c0, 0x02000800, + 0x001005d8, 0x42000800, 0x00000008, 0x832c0400, + 0x00000005, 0x58ec1007, 0x58ec1808, 0x0201f000, + 0x00103a28, 0x592c0005, 0x82000580, 0x01000000, + 0x04020005, 0x4a034406, 0x00000004, 0x0201f000, + 0x0010230c, 0x59a00207, 0x59a01407, 0x900001c0, + 0x80081540, 0x59a00209, 0x59a01c09, 0x900001c0, + 0x800c1d40, 0x42000800, 0x00000006, 0x832c0400, + 0x00000006, 0x0201f000, 0x00103a28, 0x59a00a0a, + 0x800409c0, 0x02000000, 0x00102310, 0x82040480, + 0x000000e7, 0x04001003, 0x42000800, 0x000000e6, + 0x59a00207, 0x59a01407, 0x900001c0, 0x80081540, + 0x59a00209, 0x59a01c09, 0x900001c0, 0x800c1d40, + 0x83880400, 0x00000000, 0x0201f800, 0x00103a28, + 0x4a01d809, 0x001035ff, 0x1c01f000, 0x4031d800, + 0x58ef400b, 0x58ec0002, 0x82000580, 0x00000200, + 0x02000000, 0x00102304, 0x58ef400b, 0x59a0020b, + 0x8c000500, 0x04000008, 0x83880400, 0x00000000, + 0x4803c840, 0x4a03c842, 0x00000006, 0x04011000, + 0x497b8885, 0x4a034207, 0x000000e6, 0x0201f000, + 0x001022c0, 0x800409c0, 0x04000005, 0x4a034406, + 0x00000001, 0x0201f000, 0x0010230c, 0x0401fbe5, + 0x04020005, 0x4a034406, 0x00000002, 0x0201f000, + 0x0010230c, 0x497a5a04, 0x4a025c04, 0x00008000, + 0x59a00406, 0x800001c0, 0x02000000, 0x00102310, + 0x82001580, 0x000000ff, 0x04000005, 0x82001480, + 0x00000004, 0x02021000, 0x00102310, 0x40001000, + 0x0201f800, 0x00101fbf, 0x04020005, 0x4a034406, + 0x00000003, 0x0201f000, 0x0010230c, 0x4a01d809, + 0x0010363a, 0x1c01f000, 0x592c0005, 0x82000580, + 0x01000000, 0x02020000, 0x001022c0, 0x4a034406, + 0x00000004, 0x0201f000, 0x0010230c, 0x59a01406, + 0x8c081508, 0x04020007, 0x800409c0, 0x04000005, + 0x4a034406, 0x00000001, 0x0201f000, 0x0010230c, + 0x59a01c07, 0x820c0480, 0x00001000, 0x02021000, + 0x00102310, 0x497b2804, 0x497b2805, 0x497b281c, + 0x497b281d, 0x497b281f, 0x497b2820, 0x497b2822, + 0x497b2823, 0x80000580, 0x0201f800, 0x001015fe, + 0x59a80805, 0x8c081500, 0x04000004, 0x82040d40, + 0x00000011, 0x0401f004, 0x8c081506, 0x04000002, + 0x84040d42, 0x84040d0a, 0x48075005, 0x4202d800, + 0x00000001, 0x82081500, 0x000000e0, 0x8008010a, + 0x0c020036, 0x0201f800, 0x0010513b, 0x04020009, + 0x4a035033, 0x00000001, 0x0201f800, 0x001050a2, + 0x0401f01f, 0x4a035033, 0x00000000, 0x0401f7fb, + 0x497b5032, 0x0201f800, 0x00104142, 0x0201f800, + 0x00106c55, 0x0201f800, 0x00106ede, 0x0201f800, + 0x00106c4b, 0x59a00a07, 0x480788a7, 0x59c400a3, + 0x82000500, 0xfeffffff, 0x82000540, 0x80018000, + 0x40000800, 0x84040d20, 0x480388a3, 0x480788a3, + 0x497b504e, 0x42000800, 0x0000002d, 0x42001000, + 0x001041bc, 0x0201f800, 0x00105f69, 0x59a00407, + 0x800000c2, 0x800008c4, 0x8005d400, 0x42000000, + 0x0000ffff, 0x0201f800, 0x0010513b, 0x04000003, + 0x59a00207, 0x80000110, 0x0201f800, 0x00103afc, + 0x0201f000, 0x001022c0, 0x0010366d, 0x00103670, + 0x00103678, 0x00102310, 0x00103675, 0x00102310, + 0x00102310, 0x00102310, 0x836c0580, 0x00000003, + 0x04000005, 0x4a034406, 0x00000007, 0x0201f000, + 0x0010230c, 0x59a03c06, 0x59a00407, 0x59a04a07, + 0x902449c0, 0x80244d40, 0x59a00409, 0x59a05209, + 0x902851c0, 0x80285540, 0x0401fb46, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x417a8800, 0x41783000, 0x497b4001, 0x497b4004, + 0x832c4400, 0x00000005, 0x48234002, 0x8c1c3d04, + 0x04020078, 0x0201f800, 0x00020245, 0x0402002a, + 0x0201f800, 0x001049e7, 0x04000004, 0x0201f800, + 0x001048e3, 0x04020024, 0x8c1c3d00, 0x04000008, + 0x59340009, 0x44004000, 0x59340008, 0x80204000, + 0x44004000, 0x80204000, 0x0401f007, 0x59340007, + 0x44004000, 0x59340006, 0x80204000, 0x44004000, + 0x80204000, 0x83440580, 0x000007fe, 0x0400000d, + 0x83440580, 0x000007fc, 0x0400000a, 0x0201f800, + 0x001049f3, 0x04000003, 0x85468d5e, 0x0401f005, + 0x0201f800, 0x00104838, 0x04020002, 0x85468d5e, + 0x45444000, 0x85468d1e, 0x80204000, 0x82183400, + 0x00000003, 0x81468800, 0x83440480, 0x000007f0, + 0x0400100e, 0x8c1c3d06, 0x04000010, 0x83440580, + 0x000007f0, 0x04020004, 0x42028800, 0x000007fe, + 0x0401f006, 0x83440580, 0x000007ff, 0x04020007, + 0x42028800, 0x000007fc, 0x82180580, 0x0000000f, + 0x0400000b, 0x0401f7c0, 0x801831c0, 0x04020006, + 0x59a00801, 0x800408c4, 0x48074406, 0x0201f000, + 0x001022c0, 0x4a034004, 0x00000001, 0x49474000, + 0x59a00001, 0x80180400, 0x48034001, 0x481f4003, + 0x4a01d801, 0x00000000, 0x4819d804, 0x59a00002, + 0x4801d803, 0x4825d807, 0x4829d808, 0x4000a800, + 0x4000a000, 0x4018b000, 0x0201f800, 0x0010ab17, + 0x40ec1000, 0x0201f800, 0x00100858, 0x4a01d809, + 0x0010372a, 0x1c01f000, 0x4031d800, 0x58ef400b, + 0x58ec0002, 0x82000580, 0x00000200, 0x02000000, + 0x00102304, 0x59a00004, 0x80000540, 0x04020008, + 0x59a28800, 0x59a04002, 0x59a03803, 0x41783000, + 0x58ec4807, 0x58ec5008, 0x0401f78f, 0x59a00801, + 0x800408c4, 0x48074406, 0x0201f000, 0x001022c0, + 0x0201f800, 0x00020245, 0x0402002f, 0x0201f800, + 0x001049e7, 0x04000004, 0x0201f800, 0x001048e3, + 0x04020029, 0x83440580, 0x000007fe, 0x04000011, + 0x83440580, 0x000007fc, 0x0400000e, 0x0201f800, + 0x001049f3, 0x04000005, 0x59340403, 0x8400055e, + 0x48026c03, 0x0401f007, 0x0201f800, 0x00104838, + 0x04020004, 0x59340403, 0x8400055e, 0x48026c03, + 0x4134a000, 0x4020a800, 0x4200b000, 0x00000006, + 0x0201f800, 0x0010ab17, 0x59340007, 0x4400a800, + 0x59340006, 0x4800a801, 0x59340009, 0x4800a802, + 0x59340008, 0x4800a803, 0x59340403, 0x8400051e, + 0x48026c03, 0x82204400, 0x0000000a, 0x82183400, + 0x0000000a, 0x81468800, 0x83440480, 0x000007f0, + 0x0400100e, 0x8c1c3d06, 0x04000010, 0x83440580, + 0x000007f0, 0x04020004, 0x42028800, 0x000007fe, + 0x0401f006, 0x83440580, 0x000007ff, 0x04020007, + 0x42028800, 0x000007fc, 0x82180580, 0x0000000a, + 0x0400000b, 0x0401f7bb, 0x801831c0, 0x04020006, + 0x59a00801, 0x800408c4, 0x48074406, 0x0201f000, + 0x001022c0, 0x4a034004, 0x00000001, 0x49474000, + 0x59a00001, 0x80180400, 0x48034001, 0x481f4003, + 0x4a01d801, 0x00000000, 0x4819d804, 0x59a00002, + 0x4801d803, 0x4825d807, 0x4829d808, 0x40ec1000, + 0x0201f800, 0x00100858, 0x4a01d809, 0x001037a1, + 0x1c01f000, 0x4031d800, 0x58ef400b, 0x58ec0002, + 0x82000580, 0x00000200, 0x02000000, 0x00102304, + 0x59a00004, 0x80000540, 0x04020008, 0x59a28800, + 0x59a04002, 0x59a03803, 0x41783000, 0x58ec4807, + 0x58ec5008, 0x0401f78f, 0x59a00801, 0x800408c4, + 0x48074406, 0x0201f000, 0x001022c0, 0x42002800, + 0x0000007e, 0x59a00c06, 0x59a01207, 0x59a01c07, + 0x59a02209, 0x82040500, 0x0000ff00, 0x840001c0, + 0x82003480, 0x00000020, 0x02001000, 0x00102310, + 0x80140480, 0x02001000, 0x00102310, 0x82040500, + 0x000000ff, 0x82003480, 0x00000020, 0x02001000, + 0x00102310, 0x80140480, 0x02001000, 0x00102310, + 0x82080500, 0x0000ff00, 0x840001c0, 0x82003480, + 0x00000020, 0x02001000, 0x00102310, 0x80140480, + 0x02001000, 0x00102310, 0x82080500, 0x000000ff, + 0x82003480, 0x00000020, 0x02001000, 0x00102310, + 0x80140480, 0x02001000, 0x00102310, 0x820c0500, + 0x0000ff00, 0x840001c0, 0x82003480, 0x00000020, + 0x02001000, 0x00102310, 0x80140480, 0x02001000, + 0x00102310, 0x820c0500, 0x000000ff, 0x82003480, + 0x00000020, 0x02001000, 0x00102310, 0x80140480, + 0x02001000, 0x00102310, 0x82100500, 0x0000ff00, + 0x840001c0, 0x82003480, 0x00000020, 0x02001000, + 0x00102310, 0x80140480, 0x02001000, 0x00102310, + 0x82100500, 0x000000ff, 0x82003480, 0x00000020, + 0x02001000, 0x00102310, 0x80140480, 0x02001000, + 0x00102310, 0x900401c0, 0x80080d40, 0x900c01c0, + 0x80101d40, 0x83a83400, 0x0000003a, 0x44043000, + 0x80183000, 0x440c3000, 0x0201f000, 0x001022c0, + 0x0401f9ec, 0x04020005, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x42000800, 0x0000000c, + 0x0401f853, 0x4a01d809, 0x00103820, 0x1c01f000, + 0x4031d800, 0x58ee580d, 0x58ef400b, 0x58ec0002, + 0x82000580, 0x00000200, 0x02000000, 0x00102304, + 0x832ca400, 0x00000004, 0x4200b000, 0x0000000c, + 0x40c8a800, 0x0201f800, 0x0010ab17, 0x58c80200, + 0x80000540, 0x04000034, 0x58c80400, 0x82000500, + 0xfffffffb, 0x04020030, 0x58c80401, 0x80000540, + 0x0400002d, 0x82000480, 0x0000ff01, 0x0402102a, + 0x58c80202, 0x82000480, 0x0000005c, 0x04001026, + 0x0201f800, 0x001063a3, 0x58c80c08, 0x58c80204, + 0x80040480, 0x04001020, 0x58c80204, 0x82000480, + 0x00000005, 0x0402101c, 0x58c80205, 0x58c80c08, + 0x80040902, 0x80040480, 0x04001017, 0x58c80c08, + 0x0201f800, 0x001062f1, 0x0400001b, 0x0201f800, + 0x001061b9, 0x04020012, 0x4979940b, 0x59c408a3, + 0x82040d40, 0x00000002, 0x480788a3, 0x4a038830, + 0x00000001, 0x4a038832, 0x01ffffff, 0x58c80202, + 0x48030804, 0x0201f800, 0x0010619b, 0x0201f000, + 0x001022c0, 0x0201f000, 0x00102310, 0x0201f800, + 0x001063f5, 0x0201f800, 0x00106402, 0x0201f800, + 0x001062e4, 0x0201f000, 0x0010230c, 0x4c000000, + 0x59a01207, 0x59a00407, 0x900811c0, 0x80081540, + 0x59a01a09, 0x59a00409, 0x900c19c0, 0x800c1d40, + 0x5c000000, 0x0401f1ac, 0x59840000, 0x82000580, + 0x00000000, 0x04000054, 0x59840002, 0x8c000504, + 0x04000051, 0x84000546, 0x48030802, 0x0201f800, + 0x001062e4, 0x59c408a3, 0x82040d00, 0xfffffffd, + 0x480788a3, 0x4c5c0000, 0x4200b800, 0x0010ac00, + 0x505e6800, 0x813669c0, 0x04000008, 0x5936600e, + 0x813261c0, 0x04000005, 0x0201f800, 0x001062d5, + 0x02000800, 0x001064ad, 0x805cb800, 0x825c0580, + 0x0010b3f0, 0x040207f3, 0x59866003, 0x813261c0, + 0x0400000b, 0x59300406, 0x82000580, 0x00000009, + 0x02020800, 0x001005d8, 0x5930b800, 0x0201f800, + 0x001062c1, 0x405e6000, 0x0401f7f5, 0x497b0803, + 0x4200b800, 0x0010b51b, 0x505e6000, 0x813261c0, + 0x04000011, 0x59300406, 0x82000580, 0x00000009, + 0x0402000d, 0x59300203, 0x82000580, 0x00000004, + 0x04020009, 0x59326809, 0x813669c0, 0x02020800, + 0x001005d8, 0x0201f800, 0x00100e99, 0x0201f800, + 0x001062c1, 0x4578b800, 0x805cb800, 0x825c0580, + 0x0010b523, 0x040207e9, 0x42000800, 0x0010b519, + 0x49780801, 0x49780800, 0x59a80069, 0x82000400, + 0x00000007, 0x48035069, 0x0201f800, 0x001063f5, + 0x0201f800, 0x00106402, 0x5c00b800, 0x0201f800, + 0x001061b4, 0x0201f000, 0x001022c0, 0x836c0580, + 0x00000003, 0x04000005, 0x4a034406, 0x00000007, + 0x0201f000, 0x0010230c, 0x59a00407, 0x59a02207, + 0x901021c0, 0x80102540, 0x59a00409, 0x59a02a09, + 0x901429c0, 0x80142d40, 0x0401f91e, 0x04020005, + 0x4a034406, 0x00000002, 0x0201f000, 0x0010230c, + 0x417a8800, 0x41781800, 0x497b4001, 0x497b4003, + 0x832c3400, 0x00000004, 0x481b4002, 0x41440000, + 0x81ac0400, 0x50026800, 0x813669c0, 0x0400000b, + 0x0201f800, 0x001049e7, 0x04020008, 0x59340002, + 0x48003000, 0x49443001, 0x82183400, 0x00000002, + 0x820c1c00, 0x00000002, 0x81468800, 0x83440480, + 0x00000800, 0x04000005, 0x820c0480, 0x00000010, + 0x0402100b, 0x0401f7ea, 0x800c19c0, 0x04020006, + 0x59a00801, 0x80040902, 0x48074406, 0x0201f000, + 0x001022c0, 0x4a034003, 0x00000001, 0x49474000, + 0x59a00001, 0x800c0400, 0x48034001, 0x40ec1000, + 0x4a001001, 0x00000000, 0x480c1004, 0x59a00002, + 0x48001003, 0x48101007, 0x48141008, 0x0201f800, + 0x00100858, 0x4a01d809, 0x00103920, 0x1c01f000, + 0x4031d800, 0x58ef400b, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x59a00003, + 0x80000540, 0x04020008, 0x59a28800, 0x59a03002, + 0x41781800, 0x40ec1000, 0x58082007, 0x58082808, + 0x0401f7bf, 0x59a00801, 0x80040902, 0x48074406, + 0x0201f000, 0x001022c0, 0x800409c0, 0x04000005, + 0x4a034406, 0x00000001, 0x0201f000, 0x0010230c, + 0x59a80026, 0x8c00050a, 0x04020007, 0x8c000506, + 0x04020005, 0x4a034406, 0x00000016, 0x0201f000, + 0x0010230c, 0x0401f8bb, 0x04020005, 0x4a034406, + 0x00000002, 0x0201f000, 0x0010230c, 0x59a00c06, + 0x80040902, 0x59a00407, 0x59a01207, 0x900811c0, + 0x80081540, 0x59a00409, 0x59a01a09, 0x900c19c0, + 0x800c1d40, 0x832c0400, 0x00000005, 0x0401f8ce, + 0x4a01d809, 0x0010395b, 0x1c01f000, 0x4031d800, + 0x58ef400b, 0x58ee580d, 0x58ec0002, 0x82000580, + 0x00000200, 0x02000000, 0x00102304, 0x592c0009, + 0x0201f800, 0x00105c9a, 0x02000800, 0x001045a6, + 0x02020000, 0x00102310, 0x49474001, 0x481a6802, + 0x592c000a, 0x82001d80, 0x70000000, 0x04020007, + 0x0401f890, 0x04020011, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x82001d80, 0x72000000, + 0x02020000, 0x00102310, 0x0401f886, 0x04020885, + 0x04020884, 0x04020005, 0x4a034406, 0x00000002, + 0x0201f000, 0x0010230c, 0x58ee580d, 0x4a025c04, + 0x00008000, 0x497a5a04, 0x592c3208, 0x80183102, + 0x592c1801, 0x4a001805, 0x01000000, 0x0201f800, + 0x001090d1, 0x04020005, 0x4a034406, 0x00000003, + 0x0201f000, 0x0010230c, 0x4a01d809, 0x00103995, + 0x1c01f000, 0x592c4000, 0x592c0005, 0x82000580, + 0x01000000, 0x04020005, 0x4a034406, 0x00000004, + 0x0201f000, 0x0010230c, 0x832c3c00, 0x00000005, + 0x401ca000, 0x401ca800, 0x5820280a, 0x4200b000, + 0x00000002, 0x82143580, 0x70000000, 0x04000003, + 0x4200b000, 0x0000000f, 0x0201f800, 0x0010ab28, + 0x401c0000, 0x58201006, 0x58201807, 0x58202205, + 0x80102102, 0x82143580, 0x70000000, 0x04020008, + 0x82103480, 0x00000002, 0x02001000, 0x00102310, + 0x42000800, 0x00000002, 0x0401f06e, 0x82143580, + 0x72000000, 0x02020000, 0x00102310, 0x82103480, + 0x0000002a, 0x02001000, 0x00102310, 0x42000800, + 0x0000000f, 0x0401f863, 0x4a01d809, 0x001039c9, + 0x1c01f000, 0x4031d800, 0x58ef400b, 0x58ee580e, + 0x58ec0002, 0x82000580, 0x00000200, 0x02000000, + 0x00102304, 0x592e5800, 0x832c0c00, 0x00000005, + 0x4004a000, 0x4004a800, 0x4200b000, 0x0000000f, + 0x0201f800, 0x0010ab28, 0x40ec1000, 0x4a001001, + 0x00000000, 0x4a001004, 0x0000000f, 0x48041003, + 0x0201f800, 0x00100858, 0x4a01d809, 0x001039e5, + 0x1c01f000, 0x4031d800, 0x58ef400b, 0x58ee580e, + 0x58ec0002, 0x82000580, 0x00000200, 0x02000000, + 0x00102304, 0x832c0c00, 0x00000005, 0x4004a000, + 0x4004a800, 0x4200b000, 0x0000000c, 0x0201f800, + 0x0010ab28, 0x40ec1000, 0x4a001001, 0x00000000, + 0x4a001004, 0x0000000c, 0x48041003, 0x0201f800, + 0x00100858, 0x4a01d809, 0x001022b9, 0x1c01f000, + 0x0201f800, 0x001007e4, 0x04000010, 0x497a5800, + 0x58ec000d, 0x80000540, 0x04020004, 0x492dd80d, + 0x492dd80e, 0x0401f007, 0x58ec000e, 0x48025800, + 0x82000400, 0x00000001, 0x452c0000, 0x492dd80e, + 0x832c0400, 0x00000004, 0x492fc857, 0x4803c857, + 0x1c01f000, 0x4d2c0000, 0x48efc857, 0x58ec400d, + 0x4823c857, 0x802041c0, 0x04000007, 0x40225800, + 0x592c4001, 0x497a5801, 0x0201f800, 0x001007f4, + 0x0401f7f8, 0x4979d80d, 0x4979d80e, 0x5c025800, + 0x1c01f000, 0x42003000, 0x00000001, 0x0401f003, + 0x42003000, 0x00000000, 0x4803c857, 0x4807c857, + 0x480bc857, 0x480fc857, 0x481bc857, 0x48efc857, + 0x4819d801, 0x800409c0, 0x02000800, 0x001005d8, + 0x4805d804, 0x4801d803, 0x4809d807, 0x480dd808, + 0x40ec1000, 0x0201f800, 0x00100858, 0x4a01d809, + 0x001022b9, 0x1c01f000, 0x80002d80, 0x480bc857, + 0x480fc857, 0x4813c857, 0x4817c857, 0x4d2c0000, + 0x4da00000, 0x42034000, 0x0010b4a4, 0x59a00017, + 0x800001c0, 0x04020013, 0x04006012, 0x480bc020, + 0x480fc021, 0x4813c022, 0x4817c023, 0x900811c0, + 0x82081540, 0x00000012, 0x480bc011, 0x59e00017, + 0x8c000508, 0x04020004, 0x4203e000, 0x30000001, + 0x0401f053, 0x4a03c017, 0x00000002, 0x0401f7fb, + 0x4c040000, 0x4c1c0000, 0x80000800, 0x48074017, + 0x59a0381a, 0x481fc857, 0x801c39c0, 0x04020027, + 0x82000480, 0x0000000a, 0x04021010, 0x59a00018, + 0x80000000, 0x48034018, 0x59a00219, 0x82000400, + 0x00000002, 0x82000c80, 0x00000013, 0x48034219, + 0x04001003, 0x497b4219, 0x41780000, 0x59a03816, + 0x801c3c00, 0x0401f030, 0x4803c856, 0x0201f800, + 0x001007e4, 0x04000007, 0x492f401a, 0x492f401b, + 0x412c3800, 0x497b421c, 0x497a5813, 0x0401f026, + 0x59880051, 0x80000000, 0x48031051, 0x59a00017, + 0x80000040, 0x48034017, 0x59a00219, 0x59a03816, + 0x801c3c00, 0x0401f01c, 0x59a0021c, 0x82000400, + 0x00000002, 0x82000c80, 0x00000012, 0x04021004, + 0x4803421c, 0x801c3c00, 0x0401f013, 0x0201f800, + 0x001007e4, 0x0402000b, 0x59880051, 0x80000000, + 0x48031051, 0x59a00017, 0x80000040, 0x48034017, + 0x4803c856, 0x59a0021c, 0x801c3c00, 0x0401f006, + 0x492f401a, 0x492c3813, 0x412c3800, 0x497b421c, + 0x497a5813, 0x48083c00, 0x480c3a00, 0x48103c01, + 0x48143a01, 0x5c003800, 0x5c000800, 0x5c034000, + 0x5c025800, 0x1c01f000, 0x480fc857, 0x4813c857, + 0x481bc857, 0x42000000, 0x0010b813, 0x0201f800, + 0x0010aa47, 0x801800d0, 0x40002800, 0x42001000, + 0x00008014, 0x0401f786, 0x4c000000, 0x599c0017, + 0x8c000512, 0x5c000000, 0x1c01f000, 0x4c000000, + 0x599c0018, 0x8c00050e, 0x5c000000, 0x1c01f000, + 0x59a80821, 0x800409c0, 0x04000005, 0x4a034406, + 0x00000001, 0x0201f000, 0x0010230c, 0x836c0580, + 0x00000003, 0x04000005, 0x4a034406, 0x00000007, + 0x0201f000, 0x0010230c, 0x599c0017, 0x8c00050a, + 0x04000005, 0x4a034406, 0x00000008, 0x0201f000, + 0x0010230c, 0x59340405, 0x8c000508, 0x04020004, + 0x8c00050a, 0x02020000, 0x001034db, 0x497a5a04, + 0x497a5805, 0x4a025c04, 0x00008000, 0x0201f800, + 0x00109176, 0x04020005, 0x4a034406, 0x00000003, + 0x0201f000, 0x0010230c, 0x4a01d809, 0x00103aed, + 0x1c01f000, 0x592c0005, 0x82000580, 0x01000000, + 0x04020005, 0x4a034406, 0x00000004, 0x0201f000, + 0x0010230c, 0x59a28c06, 0x0201f800, 0x00020245, + 0x02020000, 0x00102310, 0x0201f000, 0x001034db, + 0x82001580, 0x0000ffff, 0x04000009, 0x0201f800, + 0x00105c9a, 0x02000800, 0x00020245, 0x0402000c, + 0x0201f800, 0x00105fae, 0x0401f009, 0x42028800, + 0x000007ef, 0x0201f800, 0x00020245, 0x02000800, + 0x00105fae, 0x81468840, 0x040217fb, 0x1c01f000, + 0x4803c856, 0x4c0c0000, 0x4d340000, 0x4d440000, + 0x42028800, 0x000007fe, 0x0201f800, 0x00020245, + 0x04020009, 0x5934180a, 0x820c1d00, 0x00000001, + 0x820c1d80, 0x00000001, 0x42001000, 0x0000801b, + 0x0401ff1e, 0x5c028800, 0x5c026800, 0x5c001800, + 0x1c01f000, 0x599c0017, 0x8c000508, 0x1c01f000, + 0x48efc857, 0x04011000, 0x48efc840, 0x4a03c842, + 0x00000011, 0x40000000, 0x040117ff, 0x4a01d80f, + 0xbeefbeef, 0x1c01f000, 0x497b4000, 0x497b4001, + 0x497b4002, 0x497b4003, 0x497b4004, 0x1c01f000, + 0x59c400a4, 0x4c580000, 0x4c500000, 0x4c540000, + 0x82000500, 0x0000000f, 0x82000480, 0x00000007, + 0x0400100a, 0x82006c80, 0x00000006, 0x02021800, + 0x001005d8, 0x0c01f807, 0x5c00a800, 0x5c00a000, + 0x5c00b000, 0x1c01f000, 0x0401f906, 0x0401f7fb, + 0x00103b51, 0x00103b57, 0x00103b7c, 0x00103b9e, + 0x00103c59, 0x59c40806, 0x8c040d00, 0x04020003, + 0x84040d40, 0x48078806, 0x1c01f000, 0x59c40005, + 0x8c000534, 0x02020000, 0x0010429e, 0x4a038805, + 0xffffffff, 0x42006000, 0x00020000, 0x0201f800, + 0x00104282, 0x59a80015, 0x82000500, 0xfffffffa, + 0x84000542, 0x48035015, 0x497b5026, 0x42000800, + 0x0010be21, 0x45780800, 0x497b5013, 0x42006000, + 0xffefffff, 0x42006800, 0x40000000, 0x0201f800, + 0x0010427d, 0x59c40006, 0x82000500, 0xffffff0f, + 0x48038806, 0x42000800, 0x00000010, 0x42001000, + 0x001041f3, 0x0201f800, 0x00105f83, 0x0401f001, + 0x42006000, 0xffffffff, 0x42006800, 0x00800000, + 0x0201f800, 0x0010427d, 0x4200b000, 0x000000c8, + 0x59c400a4, 0x82000500, 0x0000000f, 0x82000580, + 0x0000000a, 0x0400000f, 0x8058b040, 0x040207f9, + 0x497b5014, 0x42006000, 0xbf7fffff, 0x42006800, + 0x00018000, 0x0201f800, 0x0010427d, 0x42006000, + 0xfffeffff, 0x41786800, 0x0201f000, 0x0010427d, + 0x497b5014, 0x4a035012, 0x00000000, 0x80000580, + 0x0201f000, 0x00104289, 0x4a038805, 0xffffffff, + 0x59a80012, 0x82000c80, 0x00000004, 0x02021800, + 0x001005d8, 0x0c01f001, 0x00103ba9, 0x00103bd6, + 0x00103c4f, 0x4803c856, 0x59c400a3, 0x8400051e, + 0x480388a3, 0x4a035012, 0x00000001, 0x59c40008, + 0x8400054e, 0x48038808, 0x0201f800, 0x00104263, + 0x42007800, 0x0010b54c, 0x4a007806, 0x11010000, + 0x4200a000, 0x0010b402, 0x4200a800, 0x0010b553, + 0x4200b000, 0x00000002, 0x0201f800, 0x0010ab17, + 0x497b8802, 0x42000800, 0x00000003, 0x497b504a, + 0x0201f800, 0x0010416e, 0x4a03504a, 0x00000001, + 0x497b5016, 0x0201f800, 0x00104290, 0x42006000, + 0xffffffff, 0x42006800, 0x00080000, 0x0201f800, + 0x0010427d, 0x42006000, 0xfff7ffff, 0x41786800, + 0x0201f000, 0x0010427d, 0x59a80016, 0x497b5016, + 0x80002540, 0x04000066, 0x59c40004, 0x82000500, + 0x00000003, 0x04020071, 0x59a80815, 0x8c040d02, + 0x0400004b, 0x82100580, 0x0000000c, 0x0402004f, + 0x82100400, 0x00000018, 0x8000b104, 0x41cc1000, + 0x42001800, 0x0010b54c, 0x50080800, 0x500c0000, + 0x80040580, 0x0402001a, 0x80081000, 0x800c1800, + 0x8058b040, 0x040207f9, 0x0201f800, 0x00104290, + 0x42006000, 0xffffffff, 0x42006800, 0x00500000, + 0x0201f800, 0x0010427d, 0x4a035012, 0x00000002, + 0x4a035014, 0x00000002, 0x42000800, 0x000007d0, + 0x42001000, 0x00104148, 0x0201f800, 0x0010606e, + 0x0201f800, 0x00104263, 0x0401f048, 0x59cc0806, + 0x82040d80, 0x11010000, 0x04020028, 0x59cc0800, + 0x82040500, 0x00ffffff, 0x0400001a, 0x82000580, + 0x000000ef, 0x04020017, 0x59cc0801, 0x82040500, + 0x00ffffff, 0x82000580, 0x000000ef, 0x04020011, + 0x83cca400, 0x00000007, 0x4200a800, 0x0010b402, + 0x4200b000, 0x00000002, 0x50500800, 0x50540000, + 0x80040480, 0x04001007, 0x04020010, 0x8050a000, + 0x8054a800, 0x8058b040, 0x040207f8, 0x0401f00b, + 0x59a80015, 0x84000502, 0x48035015, 0x41cca000, + 0x4200a800, 0x0010b54c, 0x4200b000, 0x00000009, + 0x0201f800, 0x0010ab17, 0x0201f800, 0x00104290, + 0x42006000, 0xffffffff, 0x42006800, 0x00080000, + 0x0201f800, 0x0010427d, 0x42006000, 0xfff7ffff, + 0x41786800, 0x0201f800, 0x0010427d, 0x42006000, + 0xffffffff, 0x42006800, 0x00004000, 0x0201f800, + 0x0010427d, 0x59c40004, 0x82000500, 0x00000003, + 0x04020006, 0x497b5016, 0x42000800, 0x00000003, + 0x0201f000, 0x0010416e, 0x1c01f000, 0x1c01f000, + 0x59a80014, 0x82006d80, 0x0000000f, 0x04000005, + 0x82000580, 0x0000001b, 0x02020800, 0x00104139, + 0x1c01f000, 0x59a80015, 0x84000506, 0x48035015, + 0x497b504a, 0x59a80014, 0x82000c80, 0x0000001e, + 0x02021800, 0x001005d8, 0x0c01f001, 0x00103c97, + 0x00103cac, 0x00103cd5, 0x00103cf0, 0x00103d14, + 0x00103d45, 0x00103d68, 0x00103d9b, 0x00103dbe, + 0x00103de4, 0x00103e21, 0x00103e48, 0x00103e5f, + 0x00103e71, 0x00103e8a, 0x00103ea0, 0x00103ea5, + 0x00103ecd, 0x00103ef0, 0x00103f16, 0x00103f39, + 0x00103f6c, 0x00103fae, 0x00103fd8, 0x00103ff0, + 0x00104030, 0x00104049, 0x0010405c, 0x0010405d, + 0x4803c856, 0x4202d800, 0x00000007, 0x0201f800, + 0x0010513b, 0x04000007, 0x42006000, 0xffffffd7, + 0x41786800, 0x0201f800, 0x0010427d, 0x0401f00b, + 0x59c40006, 0x82000500, 0xffffff0f, 0x48038806, + 0x42001000, 0x000000f0, 0x0201f800, 0x0010193d, + 0x0201f800, 0x00105098, 0x1c01f000, 0x4803c856, + 0x42006000, 0xbf7fffff, 0x42006800, 0x00400000, + 0x0201f800, 0x0010427d, 0x4a035014, 0x00000001, + 0x42001000, 0x001041f3, 0x0201f800, 0x00105fa4, + 0x0201f800, 0x001041f8, 0x42000800, 0x000007d0, + 0x42001000, 0x00104148, 0x0201f000, 0x0010606e, + 0x59a80016, 0x82000580, 0x00000014, 0x04020025, + 0x4803c857, 0x42006000, 0xffbfffff, 0x41786800, + 0x0201f800, 0x0010427d, 0x59c40004, 0x82000500, + 0x00000003, 0x0402001b, 0x59cc1006, 0x82081580, + 0x11020000, 0x04020016, 0x59cc1007, 0x8c08153e, + 0x0400000b, 0x59a80015, 0x8c000504, 0x04020008, + 0x42000000, 0x0010b83f, 0x0201f800, 0x0010aa47, + 0x59a80015, 0x84000544, 0x48035015, 0x42001000, + 0x00104148, 0x0201f800, 0x00105f90, 0x4a035014, + 0x00000010, 0x0401f9d4, 0x0401f002, 0x497b5016, + 0x1c01f000, 0x4803c856, 0x4a035014, 0x00000003, + 0x42006000, 0xbf3fffff, 0x42006800, 0x00100000, + 0x0201f800, 0x0010427d, 0x42001000, 0x001041f3, + 0x0201f800, 0x00105fa4, 0x0201f800, 0x001041f8, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x42007800, 0x0010b552, 0x46007800, 0x11020000, + 0x42000800, 0x00000005, 0x0201f000, 0x0010416e, + 0x59a80016, 0x80000540, 0x04000021, 0x4803c857, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x59a80016, 0x82000580, 0x00000014, 0x04020016, + 0x59cc1006, 0x82081580, 0x11020000, 0x04020012, + 0x59cc1007, 0x8c08153e, 0x0400000b, 0x59a80015, + 0x8c000504, 0x04020008, 0x42000000, 0x0010b83f, + 0x0201f800, 0x0010aa47, 0x59a80015, 0x84000544, + 0x48035015, 0x4a035014, 0x00000004, 0x0401f805, + 0x0401f003, 0x0201f800, 0x00104139, 0x1c01f000, + 0x4803c856, 0x4a035014, 0x00000005, 0x83cca400, + 0x00000006, 0x4200a800, 0x0010b552, 0x4200b000, + 0x00000005, 0x0201f800, 0x0010ab17, 0x42007800, + 0x0010b552, 0x46007800, 0x11030000, 0x0201f800, + 0x0010413e, 0x04020014, 0x59a80015, 0x8c000500, + 0x04020011, 0x59a80810, 0x82040580, 0x00ffffff, + 0x0400000d, 0x82040d00, 0x000000ff, 0x82040400, + 0x0010210e, 0x50000800, 0x80040910, 0x42001000, + 0x00000004, 0x0401fb9b, 0x0400000b, 0x0201f800, + 0x0010420d, 0x4200b000, 0x00000004, 0x83cca400, + 0x00000007, 0x4200a800, 0x0010b553, 0x0201f800, + 0x0010ab17, 0x42000800, 0x00000005, 0x0201f000, + 0x0010416e, 0x59a80016, 0x80000540, 0x04000020, + 0x4803c857, 0x42001000, 0x00104148, 0x0201f800, + 0x00105f90, 0x59a80016, 0x82000580, 0x00000014, + 0x04020016, 0x59cc1006, 0x82081580, 0x11030000, + 0x04020012, 0x59cc1007, 0x8c08153e, 0x0400000b, + 0x59a80015, 0x8c000504, 0x04020008, 0x42000000, + 0x0010b83f, 0x0201f800, 0x0010aa47, 0x59a80015, + 0x84000544, 0x48035015, 0x4a035014, 0x00000006, + 0x0401f804, 0x0401f002, 0x0401fbd3, 0x1c01f000, + 0x4803c856, 0x4a035014, 0x00000007, 0x83cca400, + 0x00000006, 0x4200a800, 0x0010b552, 0x4200b000, + 0x00000005, 0x0201f800, 0x0010ab17, 0x42007800, + 0x0010b552, 0x46007800, 0x11040000, 0x0401fbc7, + 0x04020020, 0x59a80015, 0x8c000500, 0x0402001d, + 0x599c0017, 0x8c000500, 0x0400001a, 0x599c1402, + 0x82080480, 0x0000007f, 0x02021800, 0x001005d8, + 0x4c080000, 0x82081400, 0x0010210e, 0x50081000, + 0x82081500, 0x000000ff, 0x480b5010, 0x42000800, + 0x00000003, 0x0201f800, 0x00106c78, 0x5c000800, + 0x42001000, 0x00000004, 0x0401fb3e, 0x04000005, + 0x0401fd2b, 0x04000003, 0x0201f800, 0x001015fe, + 0x42000800, 0x00000005, 0x0401f3d4, 0x59a80016, + 0x80000540, 0x04000020, 0x4803c857, 0x42001000, + 0x00104148, 0x0201f800, 0x00105f90, 0x59a80016, + 0x82000580, 0x00000014, 0x04020016, 0x59cc1006, + 0x82081580, 0x11040000, 0x04020012, 0x59cc1007, + 0x8c08153e, 0x0400000b, 0x59a80015, 0x8c000504, + 0x04020008, 0x42000000, 0x0010b83f, 0x0201f800, + 0x0010aa47, 0x59a80015, 0x84000544, 0x48035015, + 0x4a035014, 0x00000008, 0x0401f804, 0x0401f002, + 0x0401fb7d, 0x1c01f000, 0x4803c856, 0x4a035014, + 0x00000009, 0x83cca400, 0x00000006, 0x4200a800, + 0x0010b552, 0x4200b000, 0x00000005, 0x0201f800, + 0x0010ab17, 0x42007800, 0x0010b552, 0x46007800, + 0x11050100, 0x0401fb71, 0x0402000a, 0x59a80015, + 0x8c000500, 0x04020007, 0x0401fa8c, 0x04020005, + 0x82000540, 0x00000001, 0x0201f800, 0x001015fe, + 0x42000800, 0x00000005, 0x0401fb94, 0x0401fb63, + 0x04020ea4, 0x4d3c0000, 0x42027800, 0x00000001, + 0x0201f800, 0x00109874, 0x5c027800, 0x1c01f000, + 0x59a80016, 0x80000540, 0x0400003a, 0x4803c857, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x59a80016, 0x82000580, 0x00000014, 0x04020030, + 0x59cc1006, 0x82080500, 0x11050000, 0x82000580, + 0x11050000, 0x0402002a, 0x8c081510, 0x04000014, + 0x59cc1007, 0x8c08153e, 0x0400000b, 0x59a80015, + 0x8c000504, 0x04020008, 0x42000000, 0x0010b83f, + 0x0201f800, 0x0010aa47, 0x59a80015, 0x84000544, + 0x48035015, 0x4a035013, 0x00000001, 0x4a035014, + 0x0000000a, 0x0401f818, 0x0401f016, 0x80000540, + 0x04020013, 0x59cc1007, 0x8c08153e, 0x0400000b, + 0x59a80015, 0x8c000504, 0x04020008, 0x42000000, + 0x0010b83f, 0x0201f800, 0x0010aa47, 0x59a80015, + 0x84000544, 0x48035015, 0x497b5013, 0x4a035014, + 0x0000000e, 0x0401f86d, 0x0401f002, 0x0401fb1a, + 0x1c01f000, 0x4803c856, 0x4a035014, 0x0000000b, + 0x42001000, 0x0010b553, 0x4008a800, 0x4200b000, + 0x00000020, 0x4600a800, 0xffffffff, 0x8054a800, + 0x8058b040, 0x040207fc, 0x42007800, 0x0010b552, + 0x46007800, 0x11060000, 0x42001000, 0x0010b553, + 0x0401fb0a, 0x04000005, 0x50080000, 0x46001000, + 0x00ffffff, 0x0401f00c, 0x50080800, 0x82040d00, + 0x0000ffff, 0x59a80010, 0x82000500, 0x000000ff, + 0x82000540, 0x00000100, 0x800000e0, 0x80040d40, + 0x44041000, 0x42000800, 0x00000021, 0x0401f327, + 0x59a80016, 0x80000540, 0x04000014, 0x4803c857, + 0x59a80016, 0x42001000, 0x00104148, 0x0201f800, + 0x00105f90, 0x59a80016, 0x82000580, 0x00000084, + 0x04020009, 0x59cc1006, 0x82081580, 0x11060000, + 0x04020005, 0x4a035014, 0x0000000c, 0x0401f804, + 0x0401f002, 0x0401fadc, 0x1c01f000, 0x4803c856, + 0x4a035014, 0x0000000d, 0x83cca400, 0x00000006, + 0x4200a800, 0x0010b552, 0x4200b000, 0x00000021, + 0x0201f800, 0x0010ab17, 0x42007800, 0x0010b552, + 0x46007800, 0x11070000, 0x42000800, 0x00000021, + 0x0401f2fe, 0x59a80016, 0x80000540, 0x04000016, + 0x4803c857, 0x59a80016, 0x42001000, 0x00104148, + 0x0201f800, 0x00105f90, 0x82000580, 0x00000084, + 0x0402000c, 0x59cc1006, 0x82081580, 0x11070000, + 0x04020008, 0x4a035013, 0x00000001, 0x0401fa91, + 0x4a035014, 0x0000000e, 0x0401f804, 0x0401f002, + 0x0401fab1, 0x1c01f000, 0x4803c856, 0x82040d40, + 0x00000001, 0x0401fbfc, 0x4a035014, 0x0000000f, + 0x497b5016, 0x42006000, 0xffffffff, 0x42006800, + 0x00300000, 0x0401fbe8, 0x42006000, 0xffdfffff, + 0x41786800, 0x0401fbe4, 0x42000800, 0x000007d0, + 0x42001000, 0x00104148, 0x0201f000, 0x00105f69, + 0x4803c856, 0x59a80016, 0x80000540, 0x04020296, + 0x1c01f000, 0x4803c856, 0x4a035014, 0x00000011, + 0x83cca400, 0x00000006, 0x4200a800, 0x0010b552, + 0x4200b000, 0x00000005, 0x0201f800, 0x0010ab17, + 0x4200a800, 0x0010b552, 0x4600a800, 0x11020000, + 0x0401fa8a, 0x04020015, 0x59a80010, 0x82000d00, + 0xffff0000, 0x04000011, 0x82000500, 0x000000ff, + 0x0400000e, 0x82000c00, 0x0010210e, 0x50040800, + 0x80040910, 0x82040580, 0x0000007e, 0x04000007, + 0x82040580, 0x00000080, 0x04000004, 0x42001000, + 0x00000004, 0x0401fa07, 0x42000800, 0x00000005, + 0x0401f2a2, 0x59a80016, 0x80000540, 0x04000020, + 0x4803c857, 0x42001000, 0x00104148, 0x0201f800, + 0x00105f90, 0x59a80016, 0x82000580, 0x00000014, + 0x04020016, 0x59cc1006, 0x82081580, 0x11030000, + 0x04020012, 0x59cc1007, 0x8c08153e, 0x0400000b, + 0x59a80015, 0x8c000504, 0x04020008, 0x42000000, + 0x0010b83f, 0x0201f800, 0x0010aa47, 0x59a80015, + 0x84000544, 0x48035015, 0x4a035014, 0x00000012, + 0x0401f804, 0x0401f002, 0x0401fa4b, 0x1c01f000, + 0x4803c856, 0x4a035014, 0x00000013, 0x83cca400, + 0x00000006, 0x4200a800, 0x0010b552, 0x4200b000, + 0x00000005, 0x0201f800, 0x0010ab17, 0x4200a800, + 0x0010b552, 0x4600a800, 0x11030000, 0x0401fa3f, + 0x04020013, 0x59a80015, 0x8c000500, 0x04020010, + 0x59a80810, 0x82040580, 0x00ffffff, 0x0400000c, + 0x82040d00, 0x000000ff, 0x82040400, 0x0010210e, + 0x50000800, 0x80040910, 0x42001000, 0x00000004, + 0x0401f9c0, 0x04000002, 0x0401fafb, 0x42000800, + 0x00000005, 0x0401f259, 0x59a80016, 0x80000540, + 0x04000020, 0x4803c857, 0x42001000, 0x00104148, + 0x0201f800, 0x00105f90, 0x59a80016, 0x82000580, + 0x00000014, 0x04020016, 0x59cc1006, 0x82081580, + 0x11040000, 0x04020012, 0x59cc1007, 0x8c08153e, + 0x0400000b, 0x59a80015, 0x8c000504, 0x04020008, + 0x42000000, 0x0010b83f, 0x0201f800, 0x0010aa47, + 0x59a80015, 0x84000544, 0x48035015, 0x4a035014, + 0x00000014, 0x0401f804, 0x0401f002, 0x0401fa02, + 0x1c01f000, 0x4803c856, 0x4a035014, 0x00000015, + 0x83cca400, 0x00000006, 0x4200a800, 0x0010b552, + 0x4200b000, 0x00000005, 0x0201f800, 0x0010ab17, + 0x4200a800, 0x0010b552, 0x4600a800, 0x11040000, + 0x0401f9f6, 0x04020020, 0x59a80015, 0x8c000500, + 0x0402001d, 0x599c0017, 0x8c000500, 0x0400001a, + 0x599c1402, 0x82080480, 0x0000007f, 0x02021800, + 0x001005d8, 0x4c080000, 0x82081400, 0x0010210e, + 0x50081000, 0x82081500, 0x000000ff, 0x480b5010, + 0x42000800, 0x00000003, 0x0201f800, 0x00106c78, + 0x5c000800, 0x42001000, 0x00000004, 0x0401f96d, + 0x04000005, 0x0201f800, 0x00103abf, 0x02020800, + 0x001015fe, 0x42000800, 0x00000005, 0x0401f203, + 0x59a80016, 0x80000540, 0x0400003f, 0x4803c857, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x59a80016, 0x82000580, 0x00000014, 0x04020035, + 0x59cc1006, 0x82080500, 0x11050000, 0x82000580, + 0x11050000, 0x0402002f, 0x8c081510, 0x04000010, + 0x0401fb09, 0x59cc1007, 0x8c08153e, 0x0400000b, + 0x59a80015, 0x8c000504, 0x04020008, 0x42000000, + 0x0010b83f, 0x0201f800, 0x0010aa47, 0x59a80015, + 0x84000544, 0x48035015, 0x0401f013, 0x59cc1007, + 0x8c08153e, 0x0400000b, 0x59a80015, 0x8c000504, + 0x04020008, 0x42000000, 0x0010b83f, 0x0201f800, + 0x0010aa47, 0x59a80015, 0x84000544, 0x48035015, + 0x82000540, 0x00000001, 0x0401faeb, 0x497b5013, + 0x0401f003, 0x4a035013, 0x00000001, 0x59cc1007, + 0x8c08153c, 0x04000003, 0x4a035026, 0x00000008, + 0x4a035014, 0x00000016, 0x0401f804, 0x0401f002, + 0x0401f98d, 0x1c01f000, 0x4803c856, 0x83cca400, + 0x00000006, 0x4200a800, 0x0010b552, 0x4200b000, + 0x00000005, 0x0201f800, 0x0010ab17, 0x4a035014, + 0x00000017, 0x59a80013, 0x8c000500, 0x04000006, + 0x42001000, 0x0010b552, 0x46001000, 0x11050100, + 0x0401f003, 0x4a035014, 0x0000001b, 0x0401f97b, + 0x0402000a, 0x59a80015, 0x8c000500, 0x04020007, + 0x0401f896, 0x04020005, 0x82000540, 0x00000001, + 0x0201f800, 0x001015fe, 0x42000800, 0x00000005, + 0x0401f99e, 0x4d3c0000, 0x42027800, 0x00000001, + 0x0201f800, 0x00109874, 0x5c027800, 0x1c01f000, + 0x59a80016, 0x80000540, 0x04000015, 0x4803c857, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x59a80016, 0x82000580, 0x00000084, 0x0402000b, + 0x59cc1006, 0x82081580, 0x11060000, 0x04020007, + 0x80000580, 0x0401faa0, 0x4a035014, 0x00000018, + 0x0401f804, 0x0401f002, 0x0401f94b, 0x1c01f000, + 0x4803c856, 0x4a035014, 0x00000019, 0x83cca400, + 0x00000006, 0x4200a800, 0x0010b552, 0x4200b000, + 0x00000021, 0x0201f800, 0x0010ab17, 0x42003800, + 0x0010b553, 0x0401f941, 0x04020018, 0x401c2800, + 0x50141000, 0x80080130, 0x80000000, 0x40001800, + 0x82081500, 0x00ffffff, 0x800000f0, 0x80080540, + 0x44002800, 0x59a80810, 0x82040d00, 0x000000ff, + 0x400c1000, 0x80081104, 0x82082400, 0x0010b553, + 0x50101000, 0x820c0500, 0x00000003, 0x0c01f806, + 0x80081540, 0x44082000, 0x42000800, 0x00000021, + 0x0401f156, 0x0010401d, 0x00104022, 0x00104027, + 0x0010402c, 0x800408f0, 0x40040000, 0x82081500, + 0x00ffffff, 0x1c01f000, 0x800408e0, 0x40040000, + 0x82081500, 0xff00ffff, 0x1c01f000, 0x800408d0, + 0x40040000, 0x82081500, 0xffff00ff, 0x1c01f000, + 0x40040000, 0x82081500, 0xffffff00, 0x1c01f000, + 0x59a80016, 0x80000540, 0x04000016, 0x4803c857, + 0x42001000, 0x00104148, 0x0201f800, 0x00105f90, + 0x59a80016, 0x82000580, 0x00000084, 0x0402000c, + 0x59cc1006, 0x82081580, 0x11070000, 0x04020008, + 0x4a035013, 0x00000001, 0x0401f8d2, 0x4a035014, + 0x0000001a, 0x0401f804, 0x0401f002, 0x0401f8f2, + 0x1c01f000, 0x82000540, 0x00000001, 0x0401fa3e, + 0x4a035014, 0x0000001b, 0x83cca400, 0x00000006, + 0x4200a800, 0x0010b552, 0x59a82016, 0x40100000, + 0x8000b104, 0x40580800, 0x5450a800, 0x8050a000, + 0x8054a800, 0x8058b040, 0x040207fc, 0x0401f113, + 0x1c01f000, 0x1c01f000, 0x4803c856, 0x42003000, + 0x00000004, 0x42004000, 0x0010b553, 0x599c2817, + 0x8c142d14, 0x0402001f, 0x42001000, 0x00000003, + 0x40200000, 0x80080400, 0x50000800, 0x82042580, + 0xffffffff, 0x04020005, 0x80081040, 0x80183040, + 0x040207f8, 0x0401f05e, 0x800811c0, 0x04020006, + 0x82042580, 0x3fffffff, 0x04000058, 0x82040d40, + 0xc0000000, 0x4200b000, 0x00000020, 0x42001800, + 0x00000001, 0x40042000, 0x80102102, 0x04021021, + 0x800c18c2, 0x8058b040, 0x040207fc, 0x0401f04b, + 0x41781000, 0x40200000, 0x80080400, 0x50000800, + 0x82042580, 0xffffffff, 0x04020005, 0x80081000, + 0x80183040, 0x040207f8, 0x0401f040, 0x800811c0, + 0x04020003, 0x82040d40, 0xc0000000, 0x4200b000, + 0x00000001, 0x42001800, 0x80000000, 0x40042000, + 0x801020c2, 0x04021007, 0x800c1902, 0x8058b000, + 0x82580480, 0x00000021, 0x040017fa, 0x0401f02f, + 0x40200000, 0x80082400, 0x50100000, 0x800c0540, + 0x44002000, 0x59a80015, 0x84000540, 0x48035015, + 0x40580000, 0x42002800, 0x00000020, 0x80142c80, + 0x40080000, 0x42003800, 0x00000003, 0x801c0480, + 0x800000ca, 0x80142d40, 0x82144c00, 0x0010210e, + 0x50242800, 0x82142d00, 0x000000ff, 0x48175010, + 0x4c040000, 0x40140800, 0x0201f800, 0x001015eb, + 0x5c000800, 0x40001800, 0x500c0000, 0x80100540, + 0x44001800, 0x59a80015, 0x84000540, 0x48035015, + 0x4200a800, 0x0010b553, 0x4020a000, 0x4200b000, + 0x00000004, 0x0201f800, 0x0010ab17, 0x82000540, + 0x00000001, 0x0401f002, 0x80000580, 0x1c01f000, + 0x4807c857, 0x480bc857, 0x4008b000, 0x83cca400, + 0x00000007, 0x4200a800, 0x0010b553, 0x40541000, + 0x0201f800, 0x0010ab17, 0x40041800, 0x41782000, + 0x42000000, 0x00000003, 0x820c1c80, 0x00000020, + 0x04001004, 0x80102000, 0x80000040, 0x0401f7fb, + 0x40041800, 0x801021c0, 0x04000005, 0x820c1c80, + 0x00000020, 0x80102040, 0x040207fd, 0x42002000, + 0x00000001, 0x800c19c0, 0x04000004, 0x801020c2, + 0x800c1840, 0x040207fe, 0x80083c00, 0x83cc2c00, + 0x00000007, 0x80142c00, 0x50140000, 0x80102d00, + 0x04020012, 0x80100540, 0x44003800, 0x82042400, + 0x0010210e, 0x50102800, 0x82142d00, 0x000000ff, + 0x48175010, 0x4c040000, 0x40140800, 0x0201f800, + 0x001015eb, 0x5c000800, 0x59a80015, 0x84000540, + 0x48035015, 0x80000580, 0x1c01f000, 0x4807c856, + 0x42001000, 0x00008017, 0x59a8184e, 0x0201f800, + 0x0010aa4f, 0x0201f800, 0x00103a3e, 0x1c01f000, + 0x4807c856, 0x4200b000, 0x00000020, 0x83cca400, + 0x00000007, 0x4200a800, 0x0010be21, 0x0201f000, + 0x0010ab28, 0x4807c856, 0x0201f800, 0x00106ede, + 0x42000800, 0x000000f7, 0x0401f8de, 0x497b2804, + 0x497b2805, 0x497b281c, 0x497b281d, 0x4202d800, + 0x00000001, 0x42006000, 0xbf7fffff, 0x42006800, + 0x00018000, 0x0401f950, 0x42006000, 0xfffeffff, + 0x41786800, 0x0401f94c, 0x497b504e, 0x42000800, + 0x0000002d, 0x42001000, 0x001041bc, 0x0201f000, + 0x00105f69, 0x4807c856, 0x0401ffe3, 0x497b5014, + 0x497b5016, 0x1c01f000, 0x4807c856, 0x59a80005, + 0x8c000506, 0x1c01f000, 0x4807c856, 0x42006000, + 0xffffffff, 0x42006800, 0x00000028, 0x0401f136, + 0x4807c856, 0x0401ffc2, 0x0201f800, 0x00106c55, + 0x4df00000, 0x0201f800, 0x00106e21, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x59c400a4, 0x82000500, + 0x0000000f, 0x82000580, 0x00000002, 0x0402000a, + 0x42006000, 0xffffffff, 0x42006800, 0x00200000, + 0x0401f921, 0x42006000, 0xffdfffff, 0x41786800, + 0x0401f91d, 0x497b5014, 0x42000800, 0x000000f7, + 0x0401f89c, 0x59c400a3, 0x82000500, 0xbf20bfff, + 0x82000540, 0x0001c000, 0x480388a3, 0x84000520, + 0x480388a3, 0x1c01f000, 0x497b5016, 0x59b400f5, + 0x8c000500, 0x04020004, 0x82000540, 0x00000001, + 0x480368f5, 0x800400c4, 0x82000400, 0x00002000, + 0x4803910a, 0x59b400f6, 0x82000500, 0x00000018, + 0x040207fd, 0x4a0368f0, 0x0010b54b, 0x42000000, + 0x0010b552, 0x480368f1, 0x82040400, 0x0000dc00, + 0x480368f3, 0x59c400a4, 0x82000500, 0x0000000f, + 0x82000580, 0x00000008, 0x04020017, 0x4c5c0000, + 0x4c600000, 0x59c4b805, 0x8c5cbd3a, 0x04020005, + 0x42000000, 0x0010b818, 0x0201f800, 0x0010aa47, + 0x4a038805, 0x02000000, 0x0201f800, 0x001019fe, + 0x4000c000, 0x0201f800, 0x00101963, 0x4202d800, + 0x00000001, 0x497b5014, 0x5c00c000, 0x5c00b800, + 0x1c01f000, 0x59c8010b, 0x8c000502, 0x040007e2, + 0x59c408a4, 0x82040d00, 0x0000000f, 0x82040d80, + 0x0000000b, 0x04020005, 0x59a80814, 0x82040d40, + 0x00002000, 0x0401f004, 0x59a80812, 0x82040d40, + 0x00001000, 0x4807504e, 0x59a8084a, 0x800409c0, + 0x04020007, 0x42000800, 0x000007d0, 0x42001000, + 0x00104148, 0x0201f800, 0x0010606e, 0x1c01f000, + 0x4807c856, 0x0401ff4e, 0x0201f800, 0x00106c55, + 0x4df00000, 0x0201f800, 0x00106e21, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x59c400a4, 0x82000500, + 0x0000000f, 0x82000580, 0x00000002, 0x0402000a, + 0x42006000, 0xffffffff, 0x42006800, 0x00200000, + 0x0401f8ad, 0x42006000, 0xffdfffff, 0x41786800, + 0x0401f8a9, 0x0201f800, 0x00105141, 0x04000014, + 0x0201f800, 0x00105151, 0x04020011, 0x4a035032, + 0x0000aaaa, 0x4c040000, 0x0201f800, 0x0010162a, + 0x59a8002a, 0x82000500, 0xffff0000, 0x80040540, + 0x4803502a, 0x5c000800, 0x4a035033, 0x00000000, + 0x0201f800, 0x001050a2, 0x0401f008, 0x4a03504c, + 0x00000005, 0x42000000, 0x00000001, 0x0201f800, + 0x00101590, 0x0401ff2c, 0x1c01f000, 0x0401f805, + 0x42006000, 0xbf7f7fff, 0x41786800, 0x0401f086, + 0x0201f800, 0x00105151, 0x04020005, 0x59c40006, + 0x82000540, 0x000000f0, 0x48038806, 0x1c01f000, + 0x800408d0, 0x59a80015, 0x8c000506, 0x04000006, + 0x59a80010, 0x82000500, 0x000000ff, 0x80040540, + 0x0401f003, 0x82040540, 0x000000f7, 0x480388a7, + 0x1c01f000, 0x4807c856, 0x42000000, 0x0010b83b, + 0x0201f800, 0x0010aa47, 0x42003000, 0x00000005, + 0x4d3c0000, 0x4c180000, 0x42003000, 0x0000000d, + 0x42027800, 0x00000002, 0x0401f038, 0x4807c856, + 0x42000000, 0x0010b86b, 0x0201f800, 0x0010aa47, + 0x42003000, 0x00000000, 0x4d3c0000, 0x4c180000, + 0x42003000, 0x0000000f, 0x42027800, 0x00000002, + 0x0401f02a, 0x4807c856, 0x42000000, 0x0010b86a, + 0x0201f800, 0x0010aa47, 0x42003000, 0x00000003, + 0x4d3c0000, 0x4c180000, 0x42003000, 0x0000000e, + 0x42027800, 0x00000202, 0x0401f01c, 0x4807c856, + 0x42000000, 0x0010b869, 0x0201f800, 0x0010aa47, + 0x42003000, 0x00000004, 0x4d3c0000, 0x4c180000, + 0x42003000, 0x00000010, 0x42027800, 0x00000202, + 0x0401f00e, 0x4807c856, 0x42000000, 0x0010b83e, + 0x0201f800, 0x0010aa47, 0x42003000, 0x00000001, + 0x4d3c0000, 0x4c180000, 0x42003000, 0x0000000c, + 0x42027800, 0x00000202, 0x42001800, 0x0000ffff, + 0x42002000, 0x00000007, 0x0201f800, 0x00103aae, + 0x5c003000, 0x4d400000, 0x0201f800, 0x0010a95d, + 0x42028000, 0x0000002a, 0x0201f800, 0x00101fe5, + 0x5c028000, 0x5c027800, 0x1c01f000, 0x4807c856, + 0x04011000, 0x4a03c840, 0x0010b54b, 0x4a03c842, + 0x00000040, 0x40000000, 0x040117ff, 0x42007800, + 0x0010b54b, 0x46007800, 0x00000011, 0x803c7800, + 0x4a007800, 0x220000ef, 0x4a007801, 0x000000ef, + 0x4a007802, 0x01380000, 0x4a007803, 0x00000000, + 0x4a007804, 0xffffffff, 0x4a007805, 0x00000000, + 0x1c01f000, 0x59c400a3, 0x80300500, 0x80340540, + 0x480388a3, 0x1c01f000, 0x4833c857, 0x59c400a3, + 0x80300540, 0x480388a3, 0x80300580, 0x480388a3, + 0x1c01f000, 0x4803c856, 0x04000004, 0x4a03504b, + 0x00000001, 0x0401f002, 0x497b504b, 0x1c01f000, + 0x4803c856, 0x59c80002, 0x80000540, 0x0400000a, + 0x80000040, 0x04000008, 0x4a039005, 0x00000140, + 0x42000000, 0x00000006, 0x80000040, 0x040207ff, + 0x0401f7f4, 0x1c01f000, 0x4c5c0000, 0x4c600000, + 0x59c4b805, 0x485fc856, 0x8c5cbd3a, 0x04020005, + 0x42000000, 0x0010b818, 0x0201f800, 0x0010aa47, + 0x4a038805, 0x02000000, 0x0201f800, 0x001019fe, + 0x4000c000, 0x0201f800, 0x00101963, 0x4a038805, + 0x04000000, 0x5c00c000, 0x5c00b800, 0x1c01f000, + 0x497a6a00, 0x4937c857, 0x4a026c00, 0x00000707, + 0x497a6801, 0x497a6808, 0x497a6809, 0x497a6806, + 0x497a6807, 0x497a6c0b, 0x497a680c, 0x0201f800, + 0x00103b25, 0x04020006, 0x5934080f, 0x59340010, + 0x80040540, 0x02020800, 0x001005d8, 0x4a026a04, + 0x00000100, 0x497a6a03, 0x59340402, 0x82000500, + 0x000000ff, 0x48026c02, 0x497a6c04, 0x497a6a05, + 0x497a6c05, 0x497a6811, 0x4d2c0000, 0x5934000d, + 0x49466c03, 0x80025d40, 0x04000004, 0x0201f800, + 0x001007fd, 0x497a680d, 0x5c025800, 0x599c0401, + 0x48026a0b, 0x599c0208, 0x48026c12, 0x497a680a, + 0x0201f000, 0x00104c62, 0x42000000, 0x00000005, + 0x80000d80, 0x0401f02d, 0x0201f800, 0x00104a09, + 0x04020017, 0x59a80026, 0x8c00050a, 0x04020010, + 0x59340212, 0x82000500, 0x0000ff00, 0x4803c857, + 0x0400000b, 0x59340a00, 0x8c040d1e, 0x02000000, + 0x000201c4, 0x42000000, 0x00000029, 0x42000800, + 0x00001000, 0x492fc857, 0x0401f018, 0x492fc857, + 0x42000000, 0x00000028, 0x0401f012, 0x59a80805, + 0x8c040d02, 0x04020003, 0x8c040d00, 0x04000004, + 0x42000000, 0x00000004, 0x0401f00a, 0x42000000, + 0x00000029, 0x59340a00, 0x8c040d1e, 0x04000005, + 0x492fc857, 0x42000800, 0x00001000, 0x0401f003, + 0x492fc857, 0x80000d80, 0x4803c857, 0x80028540, + 0x1c01f000, 0x4803c857, 0x59a80005, 0x8c000500, + 0x040207ec, 0x0201f800, 0x001049e7, 0x040207e4, + 0x59340200, 0x8c00050e, 0x040007e1, 0x0201f000, + 0x000201c4, 0x0201f800, 0x001047eb, 0x040007bf, + 0x0201f000, 0x000201c8, 0x592c0206, 0x492fc857, + 0x82000d80, 0x000007ff, 0x04020006, 0x4a025c0a, + 0x00000030, 0x42026800, 0x0010b524, 0x0401f021, + 0x82000c80, 0x000007f0, 0x04021046, 0x81ac0400, + 0x50000000, 0x80026d40, 0x04000038, 0x0201f800, + 0x001048e3, 0x04020038, 0x592c040a, 0x8c00050a, + 0x04020014, 0x592e6009, 0x83300480, 0x0010d1c0, + 0x0400103b, 0x41580000, 0x81300480, 0x04021038, + 0x59300c06, 0x82040580, 0x00000009, 0x04020037, + 0x4a025a06, 0x00000000, 0x497a5800, 0x59300008, + 0x80000540, 0x04020018, 0x492e6008, 0x0401f010, + 0x0201f800, 0x0002075a, 0x04000019, 0x592c0206, + 0x49366009, 0x492e6008, 0x4a026406, 0x00000009, + 0x497a6015, 0x49325809, 0x82000d80, 0x000007ff, + 0x04020003, 0x4a026015, 0x00008000, 0x42027000, + 0x00000043, 0x0201f800, 0x000207a1, 0x80000580, + 0x0401f020, 0x40000800, 0x58040000, 0x80000d40, + 0x040207fd, 0x492c0800, 0x0401f01a, 0x42000000, + 0x0000002c, 0x0401f016, 0x42000000, 0x00000028, + 0x0401f013, 0x59a80805, 0x82040500, 0x00000003, + 0x04000004, 0x42000000, 0x00000004, 0x0401f00c, + 0x42000000, 0x00000029, 0x0401f009, 0x42000000, + 0x00000008, 0x0401f006, 0x82040580, 0x00000007, + 0x040207fb, 0x42000000, 0x00000005, 0x80000540, + 0x1c01f000, 0x492fc857, 0x592e8c06, 0x83440d80, + 0x000007fc, 0x04000004, 0x83440480, 0x000007f0, + 0x04021014, 0x0201f800, 0x00020245, 0x04020011, + 0x0201f800, 0x001049f3, 0x04020011, 0x0201f800, + 0x0002075a, 0x0400001c, 0x49366009, 0x492e6008, + 0x4a026406, 0x0000000a, 0x42027000, 0x00000040, + 0x0201f800, 0x000207a1, 0x80000580, 0x0401f011, + 0x42000000, 0x00000028, 0x0401f00d, 0x0201f800, + 0x00104a09, 0x040007fb, 0x59a80805, 0x82040d00, + 0x00000003, 0x04000004, 0x42000000, 0x00000004, + 0x0401f003, 0x42000000, 0x00000029, 0x80000540, + 0x1c01f000, 0x42000000, 0x0000002c, 0x0401f7fc, + 0x492fc857, 0x592e8c06, 0x4947c857, 0x83440c80, + 0x00000800, 0x42000000, 0x0000000a, 0x04021176, + 0x592c4207, 0x4823c857, 0x82200500, 0x0000000f, + 0x0c01f001, 0x001043d5, 0x0010445d, 0x001044a9, + 0x001044b4, 0x001044bf, 0x001043d1, 0x001043d1, + 0x001043d1, 0x001044cf, 0x00104513, 0x00104530, + 0x001043d1, 0x001043d1, 0x001043d1, 0x001043d1, + 0x001043d1, 0x4803c857, 0x42000000, 0x0000000c, + 0x0401f15d, 0x592c1008, 0x82081500, 0x00ffffff, + 0x59a80010, 0x80084d80, 0x42000000, 0x00000010, + 0x04000155, 0x0201f800, 0x00104919, 0x04000036, + 0x4803c857, 0x82004d80, 0x0000001d, 0x0402001a, + 0x0201f800, 0x00105755, 0x59340405, 0x4c000000, + 0x0201f800, 0x001049e7, 0x5c000000, 0x04000004, + 0x8c20450a, 0x04000028, 0x80000580, 0x44002800, + 0x59340008, 0x48002802, 0x59340009, 0x48002801, + 0x59340006, 0x48002804, 0x59340007, 0x48002803, + 0x4200b000, 0x00000005, 0x0201f800, 0x0010955f, + 0x0401f166, 0x4803c857, 0x82004d80, 0x0000001a, + 0x04020003, 0x40101000, 0x0401f136, 0x4803c857, + 0x82004d80, 0x0000001b, 0x04020003, 0x40181000, + 0x0401f130, 0x4803c857, 0x82004d80, 0x0000001c, + 0x04000131, 0x82004d80, 0x00000019, 0x42000000, + 0x0000000a, 0x04000120, 0x42000000, 0x0000000a, + 0x04020137, 0x59a80005, 0x8c000514, 0x0400001b, + 0x0201f800, 0x001049e7, 0x04000018, 0x59340212, + 0x82000500, 0x0000ff00, 0x42001000, 0x00000010, + 0x0402000c, 0x42001000, 0x00000008, 0x59a80026, + 0x8c000506, 0x04020009, 0x59340002, 0x82000500, + 0x00ff0000, 0x82000580, 0x00ff0000, 0x04000007, + 0x0201f800, 0x00104c6d, 0x42000000, 0x0000001c, + 0x40181000, 0x04020107, 0x0201f800, 0x0002075a, + 0x04000111, 0x49366009, 0x492e6008, 0x4a026406, + 0x00000001, 0x8c20450a, 0x04000004, 0x592c0404, + 0x8400055c, 0x48025c04, 0x4c200000, 0x4d3c0000, + 0x42027800, 0x00001000, 0x0201f800, 0x0010203c, + 0x5c027800, 0x5c004000, 0x8c204512, 0x0400000b, + 0x599c0018, 0x8c000518, 0x04000008, 0x592c0009, + 0x82000500, 0x00000380, 0x5934080a, 0x80040d40, + 0x84040d54, 0x4806680a, 0x417a7800, 0x0401f914, + 0x42000800, 0x00000003, 0x0401f91b, 0x42027000, + 0x00000002, 0x0201f800, 0x000207a1, 0x80000580, + 0x0401f10a, 0x0201f800, 0x00020245, 0x040200ec, + 0x0201f800, 0x001049ed, 0x04000008, 0x0201f800, + 0x001049e7, 0x040200ec, 0x417a7800, 0x417a6000, + 0x0201f800, 0x001020a1, 0x59a80005, 0x8c000514, + 0x0400001b, 0x0201f800, 0x001049e7, 0x04000018, + 0x59340212, 0x82000500, 0x0000ff00, 0x42001000, + 0x00000010, 0x0402000c, 0x42001000, 0x00000008, + 0x59a80026, 0x8c000506, 0x04020009, 0x59340002, + 0x82000500, 0x00ff0000, 0x82000580, 0x00ff0000, + 0x04000007, 0x0201f800, 0x00104c6d, 0x42000000, + 0x0000001c, 0x40181000, 0x040200b2, 0x0201f800, + 0x0002075a, 0x040000bc, 0x5934080a, 0x8c204512, + 0x0400000c, 0x599c0018, 0x8c000518, 0x04000009, + 0x592c0009, 0x82000500, 0x00000380, 0x82041500, + 0xfffffc7f, 0x80080d40, 0x84040d54, 0x0401f002, + 0x84040d14, 0x4806680a, 0x49366009, 0x492e6008, + 0x4a026406, 0x00000001, 0x417a7800, 0x0401f8c8, + 0x42000800, 0x00000005, 0x0401f8cf, 0x42027000, + 0x00000003, 0x0201f800, 0x000207a1, 0x80000580, + 0x0401f0be, 0x0201f800, 0x00020245, 0x040200a0, + 0x0201f800, 0x001049fc, 0x040200a3, 0x0201f800, + 0x00109517, 0x04000094, 0x80000580, 0x0401f0b3, + 0x0201f800, 0x00020245, 0x04020095, 0x0201f800, + 0x001049fc, 0x04020098, 0x0201f800, 0x001090e6, + 0x04000089, 0x80000580, 0x0401f0a8, 0x0201f800, + 0x00020245, 0x0402008a, 0x83444d80, 0x000007fe, + 0x42000000, 0x0000000a, 0x0402006b, 0x0201f800, + 0x001049e7, 0x04020088, 0x0201f800, 0x0010952f, + 0x04000079, 0x80000580, 0x0401f098, 0x82200500, + 0x00000070, 0x04020005, 0x8c20450e, 0x42000000, + 0x0000000c, 0x0402005c, 0x8c20450a, 0x0400000d, + 0x4d3c0000, 0x42027800, 0x00001000, 0x8c20450e, + 0x04020002, 0x853e7d56, 0x82200500, 0x000000a0, + 0x0201f800, 0x001049d3, 0x5c027800, 0x0401f07f, + 0x0201f800, 0x00020245, 0x04020065, 0x8c204508, + 0x04000010, 0x4d3c0000, 0x42027800, 0x00001000, + 0x8c20450e, 0x04020002, 0x853e7d56, 0x82200500, + 0x00000090, 0x0201f800, 0x001049bb, 0x5c027800, + 0x42000000, 0x0000000a, 0x0402003b, 0x0401f06b, + 0x836c0580, 0x00000003, 0x42000800, 0x00000007, + 0x0402000f, 0x0201f800, 0x001049f3, 0x04000007, + 0x4c000000, 0x0201f800, 0x00104a1f, 0x5c000000, + 0x0400004d, 0x0401f05d, 0x0201f800, 0x001094c5, + 0x04000007, 0x80000580, 0x0401f05c, 0x0201f800, + 0x00104a1f, 0x04000051, 0x0401f054, 0x0201f800, + 0x00104a1f, 0x04000034, 0x0401f050, 0x0201f800, + 0x00020245, 0x04020036, 0x836c0580, 0x00000003, + 0x04020040, 0x8c204508, 0x04000006, 0x417a7800, + 0x417a6000, 0x0201f800, 0x001020a1, 0x0401f043, + 0x0201f800, 0x001049ed, 0x04000008, 0x0201f800, + 0x001049e7, 0x0402002c, 0x417a7800, 0x417a6000, + 0x0201f800, 0x001020a1, 0x480bc856, 0x0201f800, + 0x00109332, 0x04000018, 0x80000580, 0x0401f037, + 0x0401f7e3, 0x480bc857, 0x42000800, 0x00000019, + 0x40001000, 0x4200b000, 0x00000002, 0x0401f00a, + 0x480bc857, 0x40000800, 0x4200b000, 0x00000002, + 0x0401f005, 0x480bc857, 0x40000800, 0x4200b000, + 0x00000001, 0x480bc857, 0x42028000, 0x00000031, + 0x0401f020, 0x480bc857, 0x42000800, 0x00000003, + 0x4200b000, 0x00000001, 0x0401f7f7, 0x480bc857, + 0x42000800, 0x0000000a, 0x4200b000, 0x00000001, + 0x0401f7f1, 0x480bc857, 0x42000800, 0x00000009, + 0x40001000, 0x4200b000, 0x00000002, 0x0401f7ea, + 0x480bc857, 0x42000800, 0x00000007, 0x4200b000, + 0x00000001, 0x0401f7e4, 0x480bc857, 0x4200b000, + 0x00000001, 0x0401f7e0, 0x80028580, 0x4178b000, + 0x82000540, 0x00000001, 0x1c01f000, 0x4937c857, + 0x59326809, 0x59341200, 0x813e79c0, 0x04000003, + 0x84081540, 0x0401f002, 0x84081500, 0x480a6a00, + 0x1c01f000, 0x59326809, 0x5c000000, 0x4c000000, + 0x4803c857, 0x4937c857, 0x82040580, 0x00000006, + 0x04020004, 0x42000000, 0x00000606, 0x0401f021, + 0x82040580, 0x00000004, 0x04020004, 0x42000000, + 0x00000404, 0x0401f01b, 0x82040580, 0x00000007, + 0x42000000, 0x00000707, 0x04000016, 0x82040580, + 0x00000003, 0x42000000, 0x00000703, 0x04000011, + 0x82040580, 0x00000005, 0x42000000, 0x00000405, + 0x0400000c, 0x82040580, 0x00000009, 0x42000000, + 0x00000409, 0x04000007, 0x82040580, 0x0000000b, + 0x42000000, 0x0000070b, 0x02020800, 0x001005d8, + 0x4803c857, 0x48026c00, 0x82040d80, 0x00000006, + 0x04020005, 0x59341404, 0x800811c0, 0x02000800, + 0x001005d8, 0x1c01f000, 0x5c000000, 0x4c000000, + 0x4803c857, 0x4947c857, 0x481bc857, 0x83440480, + 0x00000800, 0x04021034, 0x83441400, 0x0010ac00, + 0x50080000, 0x80026d40, 0x04020011, 0x4c180000, + 0x4d2c0000, 0x0201f800, 0x001007d3, 0x412e6800, + 0x5c025800, 0x5c003000, 0x04000027, 0x45341000, + 0x497a680d, 0x497a6810, 0x497a680f, 0x497a680e, + 0x4c180000, 0x0401fcf3, 0x5c003000, 0x59340a12, + 0x4c040000, 0x0201f800, 0x0010513b, 0x5c000800, + 0x04000009, 0x82180500, 0x00ffff00, 0x04000008, + 0x59a81010, 0x82081500, 0x00ffff00, 0x80080580, + 0x04000003, 0x80000580, 0x0401f004, 0x82180500, + 0x000000ff, 0x800000d0, 0x80040d80, 0x04000003, + 0x4803c857, 0x48026a12, 0x59340002, 0x80180580, + 0x04000003, 0x481bc857, 0x481a6802, 0x80000580, + 0x1c01f000, 0x4803c856, 0x82000540, 0x00000001, + 0x0401f7fc, 0x4947c857, 0x83440480, 0x00000800, + 0x04021011, 0x83441400, 0x0010ac00, 0x50080000, + 0x80026d40, 0x0400000b, 0x0401fbf9, 0x0402000a, + 0x59a80005, 0x8c000502, 0x04000004, 0x59340200, + 0x8c00050e, 0x04000004, 0x82000540, 0x00000001, + 0x1c01f000, 0x80000580, 0x0401f7fe, 0x5c000000, + 0x4c000000, 0x4803c857, 0x4947c857, 0x4d2c0000, + 0x4d300000, 0x83440480, 0x00000800, 0x04021024, + 0x83441400, 0x0010ac00, 0x50080000, 0x80026d40, + 0x0400001b, 0x45781000, 0x5934000d, 0x80025d40, + 0x02020800, 0x001007fd, 0x59366011, 0x813261c0, + 0x0400000e, 0x4c640000, 0x5930c800, 0x59325808, + 0x0201f800, 0x00109037, 0x02020800, 0x001007fd, + 0x0201f800, 0x0002077d, 0x82666540, 0x00000000, + 0x040207f6, 0x5c00c800, 0x0201f800, 0x00104c62, + 0x41365800, 0x0201f800, 0x001007f5, 0x80000580, + 0x5c026000, 0x5c025800, 0x1c01f000, 0x82000540, + 0x00000001, 0x0401f7fb, 0x4937c857, 0x4c580000, + 0x59cc0001, 0x82000500, 0x00ffffff, 0x48026802, + 0x497a6c01, 0x497a6a01, 0x59340200, 0x84000502, + 0x48026a00, 0x0201f800, 0x0010513b, 0x04020017, + 0x59340403, 0x82000580, 0x000007fe, 0x04000005, + 0x59a80026, 0x8c00050a, 0x04020010, 0x0401f008, + 0x59cc0408, 0x8c000518, 0x0400000c, 0x59cc0009, + 0x48035035, 0x59cc000a, 0x48035036, 0x59cc0207, + 0x80000540, 0x04020003, 0x42000000, 0x00000001, + 0x48038893, 0x4803501e, 0x59cc0a09, 0x82040d00, + 0x00000010, 0x59cc0408, 0x82000500, 0x00000020, + 0x04000002, 0x84040d40, 0x5934000a, 0x82000500, + 0xffffffee, 0x80040540, 0x4802680a, 0x83cca400, + 0x0000000b, 0x8334ac00, 0x00000006, 0x4200b000, + 0x00000002, 0x0201f800, 0x0010ab17, 0x83cca400, + 0x0000000d, 0x8334ac00, 0x00000008, 0x4200b000, + 0x00000002, 0x0201f800, 0x0010ab17, 0x59cc0a18, + 0x82040480, 0x00000800, 0x0402100c, 0x82040480, + 0x00000400, 0x04001004, 0x42000800, 0x00000400, + 0x0401f006, 0x82040480, 0x00000200, 0x04001003, + 0x42000800, 0x00000200, 0x48066a04, 0x59340403, + 0x82000580, 0x000007fe, 0x04020003, 0x59cc0a08, + 0x48066a04, 0x42000800, 0x00000004, 0x59cc1207, + 0x800811c0, 0x04000005, 0x82080480, 0x00000004, + 0x04021002, 0x40080800, 0x48066c04, 0x5c00b000, + 0x1c01f000, 0x4937c857, 0x59a80026, 0x8c000508, + 0x04000004, 0x84000556, 0x4803c857, 0x48035026, + 0x59cc0207, 0x4803c857, 0x48026a05, 0x59cc020a, + 0x4803c857, 0x48026c05, 0x59341200, 0x599c0818, + 0x5934180a, 0x4807c857, 0x480bc857, 0x480fc857, + 0x59cc2006, 0x82102500, 0xff000000, 0x82102580, + 0x02000000, 0x04000007, 0x8c00050e, 0x04000009, + 0x8c0c1d14, 0x04000003, 0x8c0c1d0e, 0x04000005, + 0x8c040d18, 0x04000003, 0x8408154a, 0x0401f002, + 0x8408150a, 0x8c000510, 0x04000009, 0x8c0c1d14, + 0x04000003, 0x8c0c1d10, 0x04000005, 0x8c040d18, + 0x04000003, 0x8408154e, 0x0401f002, 0x8408150e, + 0x8c000512, 0x04000009, 0x8c0c1d14, 0x04000003, + 0x8c0c1d12, 0x04000005, 0x8c040d18, 0x04000003, + 0x8408155c, 0x0401f002, 0x8408151c, 0x480a6a00, + 0x1c01f000, 0x4803c856, 0x4c5c0000, 0x4d2c0000, + 0x4c580000, 0x5934000d, 0x80025d40, 0x04000029, + 0x592c0003, 0x82000480, 0x00000008, 0x0400100b, + 0x412cb800, 0x592c0001, 0x80025d40, 0x040207f9, + 0x0201f800, 0x001007e4, 0x04000037, 0x492fc857, + 0x492cb801, 0x0401f020, 0x832c0c00, 0x00000004, + 0x4200b000, 0x00000008, 0x50040000, 0x82000580, + 0xffffffff, 0x04020006, 0x80041000, 0x50080000, + 0x82000580, 0xffffffff, 0x04000007, 0x82040c00, + 0x00000002, 0x8058b040, 0x040207f4, 0x0201f800, + 0x001005d8, 0x45480800, 0x454c1000, 0x592c1803, + 0x800c1800, 0x480e5803, 0x480fc857, 0x0401f014, + 0x0201f800, 0x001007e4, 0x04000017, 0x492fc857, + 0x492e680d, 0x497a5802, 0x4a025803, 0x00000001, + 0x494a5804, 0x494e5805, 0x832c0c00, 0x00000006, + 0x4200b000, 0x0000000e, 0x46000800, 0xffffffff, + 0x80040800, 0x8058b040, 0x040207fc, 0x82000540, + 0x00000001, 0x5c00b000, 0x5c025800, 0x5c00b800, + 0x1c01f000, 0x80000580, 0x0401f7fb, 0x4803c856, + 0x4d3c0000, 0x4d2c0000, 0x5934000d, 0x80025d40, + 0x0400001f, 0x592c0002, 0x80000540, 0x0402001f, + 0x412e7800, 0x0401f8ce, 0x0402001c, 0x46000800, + 0xffffffff, 0x46001000, 0xffffffff, 0x4813c857, + 0x480fc857, 0x580c0003, 0x82000c80, 0x00000002, + 0x04021014, 0x480fc857, 0x400c0000, 0x812c0580, + 0x04020004, 0x580c0001, 0x4802680d, 0x0401f003, + 0x580c0001, 0x48002001, 0x400e5800, 0x0201f800, + 0x001007f4, 0x82000540, 0x00000001, 0x5c025800, + 0x5c027800, 0x1c01f000, 0x80000580, 0x0401f7fc, + 0x80000040, 0x48001803, 0x4803c857, 0x0401f7f6, + 0x0201f800, 0x00020086, 0x59300007, 0x8400054e, + 0x48026007, 0x592c1a04, 0x820c1d00, 0x000000ff, + 0x820c0580, 0x00000048, 0x04000013, 0x0201f000, + 0x0002028e, 0x8c000500, 0x02020800, 0x000200e5, + 0x4a026203, 0x00000002, 0x592c1a04, 0x820c1d00, + 0x000000ff, 0x820c0580, 0x00000018, 0x02000000, + 0x0002028e, 0x820c0580, 0x00000048, 0x02020000, + 0x0002028e, 0x42000800, 0x80000804, 0x0201f800, + 0x00106721, 0x0201f000, 0x00020297, 0x4a025a06, + 0x00000008, 0x0201f000, 0x000202da, 0x4a025a06, + 0x00000029, 0x0201f000, 0x000202da, 0x4a025a06, + 0x0000002a, 0x0201f000, 0x000202da, 0x4a025a06, + 0x00000028, 0x0201f000, 0x000202da, 0x4943c857, + 0x4d440000, 0x4d340000, 0x4d2c0000, 0x4c580000, + 0x4200b000, 0x000007f0, 0x417a8800, 0x0201f800, + 0x00020245, 0x0402000d, 0x8d3e7d14, 0x04000005, + 0x59340212, 0x82000500, 0x0000ff00, 0x04000007, + 0x8d3e7d06, 0x04000004, 0x59340200, 0x8c00050e, + 0x04020002, 0x0401f813, 0x81468800, 0x8058b040, + 0x040207ef, 0x83440480, 0x00000800, 0x04021008, + 0x8d3e7d02, 0x04000006, 0x42028800, 0x000007f0, + 0x4200b000, 0x00000010, 0x0401f7e5, 0x5c00b000, + 0x5c025800, 0x5c026800, 0x5c028800, 0x1c01f000, + 0x4d2c0000, 0x41783000, 0x5936580f, 0x812e59c0, + 0x04000029, 0x592c0204, 0x82000500, 0x000000ff, + 0x82000580, 0x00000012, 0x04000020, 0x8d3e7d00, + 0x04000003, 0x0401f83c, 0x0402001c, 0x592c2000, + 0x497a5800, 0x801831c0, 0x04020009, 0x59340010, + 0x812c0580, 0x04020004, 0x497a680f, 0x497a6810, + 0x0401f008, 0x4812680f, 0x0401f006, 0x48103000, + 0x59340010, 0x812c0580, 0x04020002, 0x481a6810, + 0x4a025a04, 0x00000103, 0x49425a06, 0x497a5c09, + 0x0201f800, 0x001091c6, 0x0201f800, 0x000202da, + 0x40125800, 0x0401f7da, 0x412c3000, 0x592e5800, + 0x0401f7d7, 0x5c025800, 0x1c01f000, 0x4803c856, + 0x41781800, 0x5934000f, 0x80025d40, 0x04000010, + 0x592c0005, 0x80200580, 0x592c0000, 0x04000003, + 0x412c1800, 0x0401f7f9, 0x497a5800, 0x800c19c0, + 0x04000008, 0x48001800, 0x80000540, 0x04020004, + 0x480e6810, 0x82000540, 0x00000001, 0x1c01f000, + 0x4802680f, 0x80000540, 0x040207fd, 0x497a6810, + 0x0401f7f9, 0x592c0008, 0x81480580, 0x04020003, + 0x592c0009, 0x814c0580, 0x1c01f000, 0x4803c856, + 0x4c580000, 0x413c1800, 0x400c2000, 0x593c0002, + 0x80000540, 0x04020018, 0x4200b000, 0x00000008, + 0x820c0c00, 0x00000004, 0x50040000, 0x81480580, + 0x04020005, 0x80041000, 0x50080000, 0x814c0580, + 0x0400000d, 0x82040c00, 0x00000002, 0x8058b040, + 0x040207f6, 0x400c2000, 0x580c0001, 0x80001d40, + 0x040207ee, 0x82000540, 0x00000001, 0x5c00b000, + 0x1c01f000, 0x80000580, 0x0401f7fd, 0x4937c857, + 0x4c580000, 0x4d2c0000, 0x5934000d, 0x80025d40, + 0x04020016, 0x0201f800, 0x001007e4, 0x04000010, + 0x492e680d, 0x4a025802, 0x00000001, 0x497a5803, + 0x832c0c00, 0x00000004, 0x4200b000, 0x00000010, + 0x46000800, 0xffffffff, 0x80040800, 0x8058b040, + 0x040207fc, 0x82000540, 0x00000001, 0x5c025800, + 0x5c00b000, 0x1c01f000, 0x4d2c0000, 0x592e5801, + 0x0201f800, 0x001007fd, 0x5c025800, 0x0401f7ea, + 0x4d2c0000, 0x5936580d, 0x812e59c0, 0x04000007, + 0x4937c857, 0x497a680d, 0x0201f800, 0x001007fd, + 0x82000540, 0x00000001, 0x5c025800, 0x1c01f000, + 0x59340405, 0x4937c857, 0x4803c857, 0x8c000508, + 0x1c01f000, 0x4803c856, 0x0201f800, 0x0010513b, + 0x04000011, 0x59a80815, 0x8c040d04, 0x0402000e, + 0x59a80826, 0x8c040d06, 0x0400000b, 0x83ac0400, + 0x000007fe, 0x50000000, 0x80026d40, 0x04000006, + 0x0401f9a7, 0x04020004, 0x59340200, 0x8400055a, + 0x48026a00, 0x599c0017, 0x8c000508, 0x04000015, + 0x4200b000, 0x000007f0, 0x417a8800, 0x0201f800, + 0x00020245, 0x0402000c, 0x0401f999, 0x0402000a, + 0x59a80010, 0x59340802, 0x80040580, 0x82000500, + 0x00ffff00, 0x04020004, 0x59340200, 0x8400055a, + 0x48026a00, 0x81468800, 0x8058b040, 0x040207f0, + 0x0401f884, 0x04000003, 0x59a80836, 0x0401f006, + 0x599c0017, 0x8c000508, 0x04000007, 0x42000800, + 0x000007d0, 0x42001000, 0x00104876, 0x0201f800, + 0x0010606e, 0x1c01f000, 0x4803c856, 0x4d340000, + 0x4d440000, 0x4d3c0000, 0x4c580000, 0x42001000, + 0x00104876, 0x0201f800, 0x00105f90, 0x59a80826, + 0x8c040d06, 0x04000015, 0x0401f86a, 0x04000013, + 0x83ae6c00, 0x000007fe, 0x51366800, 0x59340200, + 0x8400051a, 0x48026a00, 0x599c0017, 0x8c000508, + 0x04000007, 0x42000800, 0x000007d0, 0x42001000, + 0x00104876, 0x0201f800, 0x0010606e, 0x0201f800, + 0x00101e45, 0x0401f027, 0x4200b000, 0x000007f0, + 0x80028d80, 0x0201f800, 0x00020245, 0x0402001e, + 0x59340200, 0x8c00051a, 0x0400001b, 0x59368c03, + 0x417a7800, 0x42028000, 0x00000029, 0x41783000, + 0x0201f800, 0x0010a446, 0x59340200, 0x84000558, + 0x8400051a, 0x48026a00, 0x4937c857, 0x4a026c00, + 0x00000707, 0x42028000, 0x00000029, 0x0201f800, + 0x00106ab4, 0x417a7800, 0x0201f800, 0x001067fd, + 0x80000d80, 0x0201f800, 0x0010a2ff, 0x0201f800, + 0x00106c4b, 0x81468800, 0x8058b040, 0x040207de, + 0x5c00b000, 0x5c027800, 0x5c028800, 0x5c026800, + 0x1c01f000, 0x4933c857, 0x59303809, 0x581c0200, + 0x8400051a, 0x48003a00, 0x1c01f000, 0x4803c856, + 0x42026800, 0x0010b524, 0x497a680e, 0x42028800, + 0x000007ff, 0x0201f800, 0x001042b4, 0x4937c857, + 0x4a026c00, 0x00000606, 0x4a026802, 0x00ffffff, + 0x4a026a04, 0x00000200, 0x4a026c04, 0x00000002, + 0x1c01f000, 0x59300009, 0x50000000, 0x4933c857, + 0x4803c857, 0x8c00050e, 0x1c01f000, 0x59300009, + 0x50000000, 0x8c00050a, 0x1c01f000, 0x4933c856, + 0x0401f90f, 0x04000006, 0x59340400, 0x82000d00, + 0x000000ff, 0x82041580, 0x00000005, 0x1c01f000, + 0x4d340000, 0x83ac0400, 0x000007fe, 0x50000000, + 0x80026d40, 0x04000003, 0x59340200, 0x8c00051a, + 0x5c026800, 0x1c01f000, 0x4937c857, 0x493fc857, + 0x59340403, 0x81ac0400, 0x50000000, 0x81340580, + 0x02020800, 0x001005d8, 0x59341200, 0x813e79c0, + 0x04000003, 0x8408155e, 0x0401f002, 0x8408151e, + 0x480a6a00, 0x1c01f000, 0x4937c857, 0x0201f800, + 0x0010210a, 0x04000006, 0x59a80835, 0x42001000, + 0x00104910, 0x0201f800, 0x0010606e, 0x1c01f000, + 0x4937c857, 0x42001000, 0x00104910, 0x0201f800, + 0x00105f90, 0x59a81026, 0x84081512, 0x480b5026, + 0x1c01f000, 0x4c380000, 0x4c340000, 0x4c240000, + 0x4c600000, 0x4008c000, 0x83440480, 0x00000800, + 0x04021045, 0x80002d80, 0x41442000, 0x83447400, + 0x0010ac00, 0x4200b000, 0x000007f0, 0x83444c80, + 0x000007f0, 0x04001003, 0x4200b000, 0x00000010, + 0x50380000, 0x80000540, 0x0402001e, 0x41440000, + 0x80100580, 0x04020043, 0x40102800, 0x82104c80, + 0x000007f0, 0x04001015, 0x82104d80, 0x000007fc, + 0x04020005, 0x82604d80, 0x00fffffc, 0x0402002a, + 0x0401f00e, 0x82104d80, 0x000007fd, 0x04020005, + 0x82604d80, 0x00fffffd, 0x04020023, 0x0401f007, + 0x82104d80, 0x000007ff, 0x0402001f, 0x82604d80, + 0x00ffffff, 0x0402001c, 0x84142d5e, 0x0401f029, + 0x40006800, 0x58343002, 0x82183500, 0x00ffffff, + 0x40180000, 0x80600580, 0x04020019, 0x40100000, + 0x81440580, 0x0402000a, 0x40366800, 0x8c204508, + 0x04000053, 0x0401ff8a, 0x04020051, 0x4947c857, + 0x42000000, 0x0000001d, 0x0401f04e, 0x4947c857, + 0x480bc857, 0x4823c857, 0x42000000, 0x0000001a, + 0x0401f048, 0x4947c857, 0x4863c857, 0x4813c857, + 0x42000000, 0x00000019, 0x0401f042, 0x40100000, + 0x81440580, 0x04020007, 0x58343002, 0x4947c857, + 0x481bc857, 0x42000000, 0x0000001b, 0x0401f039, + 0x80102000, 0x80387000, 0x83444c80, 0x000007f0, + 0x04001009, 0x82104d80, 0x00000800, 0x0402000c, + 0x42002000, 0x000007f0, 0x42007000, 0x0010b3f0, + 0x0401f007, 0x82104d80, 0x000007f0, 0x04020004, + 0x41782000, 0x42007000, 0x0010ac00, 0x8058b040, + 0x040207a4, 0x801429c0, 0x04020007, 0x0201f800, + 0x001005d8, 0x4947c857, 0x42000000, 0x0000000a, + 0x0401f01c, 0x4d2c0000, 0x4c180000, 0x40603000, + 0x0401fc12, 0x4947c857, 0x4937c857, 0x5c003000, + 0x5c025800, 0x040207f4, 0x497a6a12, 0x59a80026, + 0x8c00050a, 0x0402000d, 0x82600500, 0x00ffff00, + 0x04000006, 0x59a84810, 0x82244d00, 0x00ffff00, + 0x80240580, 0x04020005, 0x82600500, 0x000000ff, + 0x800000d0, 0x48026a12, 0x48626802, 0x80000580, + 0x80000540, 0x5c00c000, 0x5c004800, 0x5c006800, + 0x5c007000, 0x1c01f000, 0x5934000f, 0x5934140b, + 0x80081040, 0x04001002, 0x480a6c0b, 0x80000540, + 0x02020800, 0x00020253, 0x1c01f000, 0x4803c857, + 0x4947c857, 0x4c300000, 0x82006500, 0x00000030, + 0x04000006, 0x4c000000, 0x0201f800, 0x0010942a, + 0x5c000000, 0x0402000b, 0x8c00050e, 0x04000006, + 0x0201f800, 0x00020245, 0x04020006, 0x4937c857, + 0x0401fc2f, 0x80000580, 0x5c006000, 0x1c01f000, + 0x82000540, 0x00000001, 0x0401f7fc, 0x4803c857, + 0x4c580000, 0x4d440000, 0x40001000, 0x80000d80, + 0x4200b000, 0x000007f0, 0x4c040000, 0x40068800, + 0x4c080000, 0x40080000, 0x0401ffdd, 0x5c001000, + 0x5c000800, 0x80040800, 0x8058b040, 0x040207f7, + 0x5c028800, 0x5c00b000, 0x1c01f000, 0x4c5c0000, + 0x59340400, 0x8200bd80, 0x00000606, 0x5c00b800, + 0x1c01f000, 0x4c5c0000, 0x59340400, 0x8200bd80, + 0x00000404, 0x5c00b800, 0x1c01f000, 0x4c5c0000, + 0x59340400, 0x8200bd80, 0x00000404, 0x04000003, + 0x8200bd80, 0x00000606, 0x5c00b800, 0x1c01f000, + 0x4c5c0000, 0x4c600000, 0x59340400, 0x8200bd00, + 0x0000ff00, 0x825cc580, 0x00000400, 0x04000003, + 0x825cc580, 0x00000600, 0x5c00c000, 0x5c00b800, + 0x1c01f000, 0x4c5c0000, 0x59340400, 0x82000500, + 0x000000ff, 0x8200bd80, 0x00000003, 0x04000003, + 0x8200bd80, 0x00000005, 0x5c00b800, 0x1c01f000, + 0x4c5c0000, 0x59340400, 0x82000500, 0x0000ff00, + 0x8400b9c0, 0x805c0580, 0x4937c857, 0x4803c857, + 0x48026c00, 0x5c00b800, 0x1c01f000, 0x4c040000, + 0x4c080000, 0x592c0207, 0x8c00050c, 0x0400000f, + 0x592e8c06, 0x82000500, 0x00000080, 0x84000548, + 0x4d3c0000, 0x42027800, 0x00001000, 0x0401ff90, + 0x5c027800, 0x82000540, 0x00000001, 0x5c001000, + 0x5c000800, 0x1c01f000, 0x80000580, 0x0401f7fc, + 0x592c040b, 0x82000500, 0x0000e000, 0x82000580, + 0x00006000, 0x04000019, 0x836c0580, 0x00000003, + 0x04000016, 0x836c0580, 0x00000002, 0x040200ff, + 0x59a80026, 0x82000d00, 0x00000038, 0x04020005, + 0x59a80832, 0x800409c0, 0x0400000c, 0x0401f0f7, + 0x82000d00, 0x00000003, 0x82040d80, 0x00000003, + 0x040200f2, 0x82000d00, 0x00000028, 0x04020003, + 0x8c00050c, 0x040000ed, 0x592c100a, 0x82080500, + 0xff000000, 0x040200ce, 0x59a80010, 0x80080580, + 0x040000c8, 0x592c0c0b, 0x82040d00, 0x0000e000, + 0x82040480, 0x00008000, 0x040210c8, 0x592e8c06, + 0x83440480, 0x00000800, 0x04001007, 0x83440580, + 0x0000ffff, 0x040200af, 0x800409c0, 0x040200f7, + 0x0401f0ac, 0x800409c0, 0x040200f4, 0x41784000, + 0x0401fead, 0x040200db, 0x42027000, 0x00000053, + 0x592c2409, 0x82100500, 0xffffff00, 0x040200aa, + 0x4813c857, 0x592c000c, 0x800001c0, 0x04000083, + 0x82100580, 0x00000004, 0x040000a0, 0x82100580, + 0x00000051, 0x0400009d, 0x82100580, 0x00000003, + 0x04000016, 0x82100580, 0x00000020, 0x0400004b, + 0x82100580, 0x00000024, 0x04000042, 0x82100580, + 0x00000021, 0x04000042, 0x82100580, 0x00000050, + 0x04000037, 0x82100580, 0x00000052, 0x04000031, + 0x82100580, 0x00000005, 0x0402006b, 0x42027000, + 0x00000001, 0x0401f01b, 0x42027000, 0x00000002, + 0x59a80005, 0x8c000514, 0x04000016, 0x0401ff4c, + 0x04000014, 0x59340212, 0x82000500, 0x0000ff00, + 0x42001000, 0x00000010, 0x0402000c, 0x59a80026, + 0x8c000506, 0x0402006f, 0x42001000, 0x00000008, + 0x59340002, 0x82000500, 0x00ff0000, 0x82000580, + 0x00ff0000, 0x04000003, 0x0401f9bf, 0x04020065, + 0x0201f800, 0x0002075a, 0x0400007e, 0x4a026406, + 0x00000010, 0x49366009, 0x42000800, 0x00000003, + 0x83380580, 0x00000002, 0x04000003, 0x42000800, + 0x0000000b, 0x0201f800, 0x00104571, 0x0401f044, + 0x42027000, 0x00000000, 0x0401f003, 0x42027000, + 0x00000004, 0x0401ff37, 0x04020071, 0x0401f036, + 0x42027000, 0x00000033, 0x0401f006, 0x42027000, + 0x00000005, 0x0401f003, 0x42027000, 0x00000003, + 0x0401ff23, 0x04020066, 0x59a80005, 0x8c000514, + 0x04000016, 0x0401ff12, 0x04000014, 0x59340212, + 0x82000500, 0x0000ff00, 0x42001000, 0x00000010, + 0x0402000c, 0x59a80026, 0x8c000506, 0x04020035, + 0x42001000, 0x00000008, 0x59340002, 0x82000500, + 0x00ff0000, 0x82000580, 0x00ff0000, 0x04000003, + 0x0401f985, 0x0402002b, 0x0201f800, 0x0002075a, + 0x04000044, 0x4a026406, 0x00000010, 0x49366009, + 0x42000800, 0x00000005, 0x83380580, 0x00000003, + 0x04000003, 0x42000800, 0x00000009, 0x0201f800, + 0x00104571, 0x0401f00a, 0x82102580, 0x00000011, + 0x0402002d, 0x0201f800, 0x0002075a, 0x04000031, + 0x4a026406, 0x00000010, 0x49366009, 0x492e6008, + 0x49325808, 0x813669c0, 0x04000007, 0x592c0c0b, + 0x8c040d18, 0x04000004, 0x59340200, 0x84000514, + 0x48026a00, 0x0201f800, 0x000207a1, 0x80000580, + 0x1c01f000, 0x82000540, 0x00000001, 0x0401f7fd, + 0x42001000, 0x0000000a, 0x0401f015, 0x42001000, + 0x00000010, 0x0401f012, 0x42001000, 0x00000016, + 0x0401f00f, 0x42001000, 0x00000017, 0x0401f00c, + 0x42001000, 0x00000018, 0x0401f009, 0x42001000, + 0x0000001b, 0x0401f006, 0x42001000, 0x0000001e, + 0x0401f003, 0x42001000, 0x00000020, 0x42000800, + 0x00000019, 0x42028000, 0x00000031, 0x0401f7e2, + 0x42000800, 0x00000003, 0x0401f003, 0x42000800, + 0x0000000a, 0x41781000, 0x0401f7f7, 0x42000800, + 0x00000009, 0x59341400, 0x0401f7f3, 0x42028000, + 0x00000008, 0x0401f005, 0x42000800, 0x00000007, + 0x416c1000, 0x0401f7ec, 0x41780800, 0x41781000, + 0x0401f7cd, 0x42028000, 0x00000000, 0x0401f7fb, + 0x82004d80, 0x0000001d, 0x02000800, 0x001005d8, + 0x82004d80, 0x0000001a, 0x04020004, 0x40101000, + 0x40000800, 0x0401f7dc, 0x82004d80, 0x0000001b, + 0x04020003, 0x40181000, 0x0401f7fa, 0x82004d80, + 0x0000001c, 0x040007f7, 0x82004d80, 0x00000019, + 0x040007b8, 0x0401f7d6, 0x592e6008, 0x0201f800, + 0x0010941a, 0x040007b6, 0x59300c06, 0x82040580, + 0x00000011, 0x040207d6, 0x83440580, 0x0000ffff, + 0x04020005, 0x59326809, 0x813669c0, 0x0400000e, + 0x0401f7cf, 0x592c100a, 0x82081500, 0x00ffffff, + 0x41784000, 0x0401fda8, 0x040207d6, 0x59300009, + 0x800001c0, 0x04000003, 0x81340580, 0x040207c4, + 0x49366009, 0x592c0c0b, 0x82041500, 0x0000e000, + 0x82080580, 0x00006000, 0x04000009, 0x59300a03, + 0x82040580, 0x00000007, 0x040207b9, 0x492e6008, + 0x42027000, 0x00000054, 0x0401f77f, 0x0201f800, + 0x0010a8d4, 0x040007bc, 0x0401f7b1, 0x492fc857, + 0x59a80021, 0x800001c0, 0x04020073, 0x592e6008, + 0x4933c857, 0x0201f800, 0x0010941a, 0x04000041, + 0x59301406, 0x82080580, 0x00000005, 0x0402005b, + 0x59301203, 0x82080580, 0x00000007, 0x04020057, + 0x592e8c06, 0x83440480, 0x00000800, 0x04021032, + 0x41784000, 0x592c1009, 0x82081500, 0x00ffffff, + 0x0401fd75, 0x0402005f, 0x59300009, 0x800001c0, + 0x04000003, 0x81340580, 0x04020048, 0x4d300000, + 0x592e6013, 0x4933c857, 0x83300580, 0xffffffff, + 0x0400000d, 0x0201f800, 0x0010941a, 0x5c026000, + 0x04000029, 0x591c1406, 0x82080580, 0x00000006, + 0x04000046, 0x82080580, 0x00000011, 0x04000043, + 0x0401f002, 0x5c026000, 0x59a80010, 0x592c100a, + 0x82081500, 0x00ffffff, 0x80081580, 0x04020017, + 0x592c1009, 0x82081500, 0x00ffffff, 0x80081580, + 0x0400000f, 0x49366009, 0x492e6008, 0x42027000, + 0x00000092, 0x0201f800, 0x000207a1, 0x80000580, + 0x1c01f000, 0x42001000, 0x0000000a, 0x0401f00c, + 0x42001000, 0x00000010, 0x0401f009, 0x42001000, + 0x00000014, 0x0401f006, 0x42001000, 0x00000018, + 0x0401f003, 0x42001000, 0x0000003c, 0x492fc857, + 0x480bc857, 0x42000800, 0x00000019, 0x42028000, + 0x00000031, 0x82000540, 0x00000001, 0x0401f7e9, + 0x492fc857, 0x4803c857, 0x480bc857, 0x40000800, + 0x0401f7f7, 0x492fc857, 0x42000800, 0x0000000a, + 0x41781000, 0x0401f7f2, 0x4933c857, 0x59300406, + 0x4803c857, 0x59300203, 0x4803c857, 0x59300009, + 0x4803c857, 0x42028000, 0x00000008, 0x41780800, + 0x41781000, 0x0401f7e8, 0x42000800, 0x0000001e, + 0x0401f7f0, 0x42000800, 0x00000001, 0x0401f7ed, + 0x82004d80, 0x0000001d, 0x02000800, 0x001005d8, + 0x82004d80, 0x0000001a, 0x04020003, 0x40101000, + 0x0401f7dc, 0x82004d80, 0x0000001b, 0x04020003, + 0x40181000, 0x0401f7d7, 0x82004d80, 0x0000001c, + 0x040007d4, 0x82004d80, 0x00000019, 0x040007d1, + 0x0401f7d5, 0x59302009, 0x801021c0, 0x04000035, + 0x58101400, 0x82081d00, 0x000000ff, 0x59300c03, + 0x82040580, 0x00000008, 0x04000022, 0x82040580, + 0x0000000a, 0x04000017, 0x82040580, 0x0000000c, + 0x04000010, 0x82040580, 0x00000002, 0x04000019, + 0x82040580, 0x00000001, 0x04000012, 0x82040580, + 0x00000003, 0x0400000b, 0x82040580, 0x00000005, + 0x04000004, 0x82040580, 0x00000033, 0x04020019, + 0x820c0580, 0x00000009, 0x0400000d, 0x0401f015, + 0x820c0580, 0x00000005, 0x04000009, 0x0401f011, + 0x820c0580, 0x0000000b, 0x04000005, 0x0401f00d, + 0x820c0580, 0x00000003, 0x0402000a, 0x82081d00, + 0xffffff00, 0x840c01c0, 0x800c0540, 0x4813c857, + 0x480bc857, 0x4807c857, 0x4803c857, 0x48002400, + 0x1c01f000, 0x599c0017, 0x8c00050a, 0x04000003, + 0x80000580, 0x1c01f000, 0x59a80026, 0x82000500, + 0x00000028, 0x04000008, 0x42028800, 0x000007fd, + 0x0201f800, 0x00020245, 0x04020003, 0x5934000a, + 0x8c000504, 0x1c01f000, 0x4d300000, 0x5934000e, + 0x80026540, 0x04000006, 0x0201f800, 0x001062d5, + 0x02000800, 0x001064ad, 0x497a680e, 0x5c026000, + 0x1c01f000, 0x4d440000, 0x4d340000, 0x80000580, + 0x40001800, 0x40028800, 0x82080580, 0x00000008, + 0x04020003, 0x42001800, 0x00000001, 0x0201f800, + 0x00020245, 0x0402000a, 0x0401fd6d, 0x04020008, + 0x800c19c0, 0x04000004, 0x59340405, 0x8c000508, + 0x04000003, 0x80081040, 0x04000009, 0x81468800, + 0x83440480, 0x00000800, 0x040017f1, 0x80000580, + 0x5c026800, 0x5c028800, 0x1c01f000, 0x82000540, + 0x00000001, 0x5c026800, 0x5c028800, 0x1c01f000, + 0x4a033020, 0x00000000, 0x497b3026, 0x497b3027, + 0x497b3028, 0x497b3029, 0x497b302b, 0x497b3021, + 0x4a03b104, 0x60000001, 0x1c01f000, 0x4803c856, + 0x599c0018, 0x497b3024, 0x497b3025, 0x82000500, + 0x0000000f, 0x82000d80, 0x00000005, 0x04000006, + 0x82000580, 0x00000006, 0x0400000d, 0x497b3022, + 0x1c01f000, 0x4a033022, 0x00000005, 0x599c0216, + 0x82000500, 0x0000ffff, 0x04020003, 0x42000000, + 0x00000002, 0x48033023, 0x1c01f000, 0x4a033022, + 0x00000006, 0x0401f7f6, 0x0401ffe5, 0x4a03c826, + 0x00000004, 0x599c0209, 0x80000540, 0x0400001f, + 0x599c0207, 0x80000540, 0x04000007, 0x800000cc, + 0x599c080d, 0x80040400, 0x4803b100, 0x497bb102, + 0x59d80101, 0x599c000d, 0x4803b100, 0x599c000e, + 0x4803b101, 0x599c0207, 0x80000540, 0x04020002, + 0x497bb102, 0x599c0a09, 0x82040540, 0x00400000, + 0x59980822, 0x4803b103, 0x4a03b109, 0x00000004, + 0x4a03b104, 0x10000001, 0x800409c0, 0x04020004, + 0x4a033020, 0x00000001, 0x1c01f000, 0x4a033020, + 0x00000002, 0x0401f7fd, 0x59980022, 0x4803c856, + 0x80000540, 0x02000000, 0x000202de, 0x0401f017, + 0x42034000, 0x0010b4a4, 0x59a1d81e, 0x80edd9c0, + 0x02000800, 0x001005d8, 0x58ec0009, 0x48efc857, + 0x49a3c857, 0x492fc857, 0x4803c857, 0x800001c0, + 0x08020000, 0x0201f800, 0x001005d8, 0x5931d821, + 0x58ef400b, 0x58ec0009, 0x800001c0, 0x08020000, + 0x0201f800, 0x001005d8, 0x497a5800, 0x59980026, + 0x80000540, 0x0402008c, 0x59d80105, 0x82000d00, + 0x00018780, 0x040201da, 0x80000106, 0x82000500, + 0x00000003, 0x0c01f001, 0x00104d0a, 0x00104d89, + 0x00104d22, 0x00104d50, 0x592c0001, 0x492fc857, + 0x492fb107, 0x80000d40, 0x04020007, 0x59940019, + 0x80000540, 0x04022003, 0x59980023, 0x48032819, + 0x1c01f000, 0x497a5801, 0x40065800, 0x592c0001, + 0x496a5800, 0x815eb800, 0x412ed000, 0x80000d40, + 0x040207f9, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x0401f7ee, 0x492fc857, 0x492fb107, + 0x592c0001, 0x80000d40, 0x04020012, 0x59da5908, + 0x835c0480, 0x00000020, 0x0400101c, 0x0402b01a, + 0x492fb007, 0x0400e7fa, 0x59d80105, 0x82000500, + 0x00018780, 0x040201aa, 0x59940019, 0x80000540, + 0x04022003, 0x59980023, 0x48032819, 0x1c01f000, + 0x497a5801, 0x40065800, 0x592c0001, 0x496a5800, + 0x815eb800, 0x412ed000, 0x80000d40, 0x040207f9, + 0x59c80000, 0x82000540, 0x00001200, 0x48039000, + 0x0401f7e3, 0x0400f009, 0x496a5800, 0x412ed000, + 0x815eb800, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x0401f7e0, 0x492fa807, 0x0401f7de, + 0x492fc857, 0x59d81108, 0x45681000, 0x400ad000, + 0x815eb800, 0x0400e7fc, 0x59c80000, 0x82000540, + 0x00001200, 0x48039000, 0x0402d00c, 0x592c0001, + 0x492fc857, 0x492fb107, 0x80000d40, 0x0402001d, + 0x59940019, 0x80000540, 0x04022003, 0x59980023, + 0x48032819, 0x1c01f000, 0x59d80105, 0x82000500, + 0x00018780, 0x04020172, 0x42000000, 0x0010b855, + 0x0201f800, 0x0010aa47, 0x59980026, 0x59980828, + 0x80000000, 0x48033026, 0x492fc857, 0x800409c0, + 0x492f3028, 0x04000003, 0x492c0800, 0x0401f002, + 0x492f3029, 0x592c0001, 0x80000d40, 0x040007e5, + 0x497a5801, 0x40065800, 0x592c0001, 0x496a5800, + 0x815eb800, 0x412ed000, 0x80000d40, 0x040207f9, + 0x59c80000, 0x82000540, 0x00001200, 0x48039000, + 0x0401f7d8, 0x59980026, 0x59980828, 0x80000000, + 0x48033026, 0x492fc857, 0x800409c0, 0x492f3028, + 0x04000003, 0x492c0800, 0x0401f002, 0x492f3029, + 0x592c0001, 0x80000d40, 0x04020027, 0x0402d00e, + 0x59980029, 0x80025d40, 0x0400000f, 0x59980026, + 0x80000040, 0x48033026, 0x04020002, 0x48033028, + 0x592c0000, 0x48033029, 0x492fc857, 0x492fb107, + 0x0400d7f4, 0x42000000, 0x0010b855, 0x0201f800, + 0x0010aa47, 0x0402e00a, 0x59da5908, 0x496a5800, + 0x412ed000, 0x815eb800, 0x0400e7fc, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x59d80105, + 0x82000500, 0x00018780, 0x04020125, 0x59940019, + 0x80000540, 0x04022003, 0x59980023, 0x48032819, + 0x1c01f000, 0x497a5801, 0x40065800, 0x592c0001, + 0x496a5800, 0x815eb800, 0x412ed000, 0x80000d40, + 0x040207f9, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x0401f7ce, 0x592c0204, 0x4803c856, + 0x04000008, 0x42034000, 0x0010b4a4, 0x59a1d81e, + 0x80edd9c0, 0x02000800, 0x001005d8, 0x0401f003, + 0x5931d821, 0x58ef400b, 0x58ec0009, 0x800001c0, + 0x08020000, 0x0201f800, 0x001005d8, 0x497a5801, + 0x40065800, 0x592c0001, 0x496a5800, 0x412ed000, + 0x815eb800, 0x80000d40, 0x040207f9, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x1c01f000, + 0x497a5801, 0x40065800, 0x592c0001, 0x496a5800, + 0x412ed000, 0x815eb800, 0x80000d40, 0x040207f9, + 0x59c80000, 0x82000540, 0x00001200, 0x48039000, + 0x0200e000, 0x000202fb, 0x0201f000, 0x00020302, + 0x5998002b, 0x84000540, 0x4803302b, 0x0201f000, + 0x0002035e, 0x42000000, 0x0010b855, 0x0201f800, + 0x0010aa47, 0x492fc857, 0x59980026, 0x59980828, + 0x80000000, 0x48033026, 0x800409c0, 0x492f3028, + 0x04000003, 0x492c0800, 0x0401f002, 0x492f3029, + 0x592c0001, 0x80000d40, 0x04020002, 0x1c01f000, + 0x497a5801, 0x40065800, 0x592c0001, 0x496a5800, + 0x412ed000, 0x815eb800, 0x80000d40, 0x040207f9, + 0x59c80000, 0x82000540, 0x00001200, 0x48039000, + 0x1c01f000, 0x59980026, 0x59980828, 0x80000000, + 0x48033026, 0x492fc857, 0x800409c0, 0x492f3028, + 0x04000003, 0x492c0800, 0x0401f002, 0x492f3029, + 0x592c0001, 0x80000d40, 0x04020039, 0x0402d00e, + 0x59980029, 0x80025d40, 0x0400000f, 0x59980026, + 0x80000040, 0x48033026, 0x04020002, 0x48033028, + 0x592c0000, 0x48033029, 0x492fc857, 0x492fb107, + 0x0400d7f4, 0x42000000, 0x0010b855, 0x0201f800, + 0x0010aa47, 0x0402e01d, 0x59da5908, 0x496a5800, + 0x412ed000, 0x815eb800, 0x0400e7fc, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x04006018, + 0x59d8010a, 0x59d8090a, 0x80040d80, 0x040207fd, + 0x900001c0, 0x82000540, 0x00000013, 0x4803c011, + 0x5998002b, 0x84000500, 0x4803302b, 0x59e00017, + 0x8c000508, 0x04000003, 0x4a03c017, 0x00000003, + 0x4203e000, 0x30000001, 0x59d80105, 0x82000500, + 0x00018780, 0x0402007e, 0x1c01f000, 0x5998002b, + 0x84000540, 0x4803302b, 0x0401f7f8, 0x497a5801, + 0x40065800, 0x592c0001, 0x496a5800, 0x412ed000, + 0x815eb800, 0x80000d40, 0x040207f9, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x0401f7bc, + 0x5c000000, 0x4c000000, 0x4803c857, 0x492fc857, + 0x4943c857, 0x4807c857, 0x4a025a04, 0x00000103, + 0x49425a06, 0x48065a08, 0x4a025c06, 0x0000ffff, + 0x813261c0, 0x04000003, 0x59300402, 0x48025c06, + 0x832c0400, 0x00000009, 0x04011000, 0x4803c840, + 0x4a03c842, 0x0000000b, 0x04011000, 0x1c01f000, + 0x4df00000, 0x4203e000, 0x50000000, 0x599cb817, + 0x59940019, 0x80000540, 0x04002023, 0x0400000e, + 0x59980022, 0x82000580, 0x00000005, 0x0400001e, + 0x59a80069, 0x81640580, 0x0402001b, 0x8c5cbd08, + 0x04000005, 0x59a8006a, 0x59a80866, 0x80040580, + 0x04020015, 0x8c5cbd08, 0x04020030, 0x59d8090b, + 0x59d8010a, 0x80040580, 0x0400000d, 0x0400600e, + 0x4a03c011, 0x80400012, 0x4a03c020, 0x00008040, + 0x59e00017, 0x8c000508, 0x04000003, 0x4a03c017, + 0x00000002, 0x4203e000, 0x30000001, 0x4a032819, + 0xffff0000, 0x04026835, 0x04006003, 0x8c5cbd08, + 0x04020860, 0x59980029, 0x80025d40, 0x04000010, + 0x59d80105, 0x82000500, 0x00018780, 0x04020020, + 0x0402d00d, 0x59980026, 0x492fc857, 0x80000040, + 0x48033026, 0x592c0000, 0x492fb107, 0x48033029, + 0x04020003, 0x4803c856, 0x48033028, 0x5c03e000, + 0x1c01f000, 0x42000000, 0x0010b855, 0x0201f800, + 0x0010aa47, 0x0401f7fa, 0x59e0000f, 0x59e0080f, + 0x80040580, 0x040207fd, 0x59e00010, 0x59e01010, + 0x80081580, 0x040207fd, 0x40065000, 0x80041580, + 0x040007c7, 0x040067dc, 0x0401f7ca, 0x4803c857, + 0x485fc857, 0x8c00050e, 0x02020800, 0x001005d0, + 0x4203e000, 0x50000000, 0x4200b800, 0x00008004, + 0x0201f000, 0x001005dd, 0x5998002b, 0x8c000500, + 0x04000013, 0x84000500, 0x4803302b, 0x59d8010a, + 0x59d8090a, 0x80040580, 0x040207fd, 0x800408e0, + 0x82040d40, 0x00000013, 0x4807c011, 0x59e00017, + 0x8c000508, 0x04000003, 0x4a03c017, 0x00000003, + 0x4203e000, 0x30000001, 0x1c01f000, 0x0402e014, + 0x59da5908, 0x496a5800, 0x412ed000, 0x815eb800, + 0x0400e7fc, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x59d8090b, 0x59980024, 0x48073024, + 0x80040480, 0x04020004, 0x59940019, 0x80000540, + 0x04022003, 0x59980823, 0x48072819, 0x59d80105, + 0x82000500, 0x00018780, 0x040207c9, 0x1c01f000, + 0x59981025, 0x59e00010, 0x59e00810, 0x80041d80, + 0x040207fd, 0x80080580, 0x04000013, 0x48073025, + 0x59e0000f, 0x59e0100f, 0x80081d80, 0x040207fd, + 0x81280580, 0x04000008, 0x400a5000, 0x40080000, + 0x80040580, 0x04000003, 0x59980823, 0x48072819, + 0x1c01f000, 0x59940019, 0x80000540, 0x040227f8, + 0x0401f7fc, 0x59e0000f, 0x59e0100f, 0x80081d80, + 0x040207fd, 0x81280580, 0x040007f6, 0x400a5000, + 0x59940019, 0x80000540, 0x040027ed, 0x0401f7f1, + 0x59a80017, 0x82000c80, 0x0000000a, 0x02021800, + 0x001005d8, 0x0c01f809, 0x4a038805, 0x000000f0, + 0x59c400a3, 0x82000500, 0x02870000, 0x02020800, + 0x001005d8, 0x1c01f000, 0x00104fc5, 0x00104f51, + 0x00104f6c, 0x00104f95, 0x00104fb8, 0x00104ff2, + 0x00105004, 0x00104f6c, 0x00104fd6, 0x00104f50, + 0x1c01f000, 0x4a038808, 0x00000004, 0x0401f8f9, + 0x0201f800, 0x001053ab, 0x59c40805, 0x8c040d0e, + 0x04020013, 0x8c040d0a, 0x0402000b, 0x8c040d0c, + 0x04020006, 0x8c040d08, 0x0400000d, 0x4a035017, + 0x00000003, 0x0401f00a, 0x4a035017, 0x00000000, + 0x0401f007, 0x42000000, 0x0010b844, 0x0201f800, + 0x0010aa47, 0x4a035017, 0x00000002, 0x1c01f000, + 0x4a038808, 0x00000002, 0x0401f8de, 0x59c40805, + 0x8c040d08, 0x04020021, 0x8c040d0c, 0x0402001c, + 0x8c040d0e, 0x04020017, 0x82040500, 0x000000f0, + 0x0402001c, 0x0201f800, 0x001053ab, 0x4a038808, + 0x00000080, 0x59c40002, 0x8400050c, 0x48038802, + 0x0401f9d9, 0x4d3c0000, 0x42027800, 0x00000001, + 0x0201f800, 0x00109874, 0x5c027800, 0x4a038808, + 0x00000080, 0x4a035017, 0x00000009, 0x0401f009, + 0x4a035017, 0x00000001, 0x0401f006, 0x4a035017, + 0x00000000, 0x0401f003, 0x4a035017, 0x00000003, + 0x1c01f000, 0x0401f8b7, 0x4a038808, 0x00000080, + 0x59c40805, 0x8c040d0a, 0x0402001b, 0x8c040d0c, + 0x04020016, 0x8c040d0e, 0x04020011, 0x82040500, + 0x000000f0, 0x04020016, 0x59c40002, 0x8400050c, + 0x48038802, 0x0401f9b4, 0x4d3c0000, 0x42027800, + 0x00000001, 0x0201f800, 0x00109874, 0x5c027800, + 0x4a035017, 0x00000009, 0x0401f009, 0x4a035017, + 0x00000001, 0x0401f006, 0x4a035017, 0x00000000, + 0x0401f003, 0x4a035017, 0x00000002, 0x1c01f000, + 0x4a038808, 0x00000008, 0x59c40805, 0x8c040d0c, + 0x04020006, 0x8c040d0e, 0x04000006, 0x4a035017, + 0x00000001, 0x0401f003, 0x4a035017, 0x00000000, + 0x1c01f000, 0x0401f8d3, 0x59c40805, 0x8c040d0c, + 0x0402000d, 0x4c040000, 0x0401f882, 0x5c000800, + 0x8c040d0a, 0x04020006, 0x8c040d0e, 0x04000006, + 0x4a035017, 0x00000001, 0x0401f003, 0x4a035017, + 0x00000002, 0x1c01f000, 0x4a038808, 0x00000008, + 0x42001000, 0x00105058, 0x0201f800, 0x00106084, + 0x59c40805, 0x8c040d0a, 0x0402000d, 0x8c040d08, + 0x0402000b, 0x8c040d0c, 0x04020006, 0x8c040d0e, + 0x0400000d, 0x4a035017, 0x00000001, 0x0401f00a, + 0x4a035017, 0x00000000, 0x0401f007, 0x42000000, + 0x0010b844, 0x0201f800, 0x0010aa47, 0x4a035017, + 0x00000004, 0x1c01f000, 0x0401f8a6, 0x0401f859, + 0x59c40805, 0x8c040d0a, 0x0402000b, 0x8c040d0c, + 0x04020006, 0x8c040d0e, 0x04000009, 0x4a035017, + 0x00000001, 0x0401f006, 0x4a035017, 0x00000000, + 0x0401f003, 0x4a035017, 0x00000002, 0x1c01f000, + 0x4a038808, 0x00000004, 0x0401f846, 0x59c40805, + 0x8c040d0a, 0x04020010, 0x8c040d08, 0x0402000b, + 0x8c040d0c, 0x04020006, 0x8c040d0e, 0x0400000c, + 0x4a035017, 0x00000001, 0x0401f009, 0x4a035017, + 0x00000000, 0x0401f006, 0x4a035017, 0x00000003, + 0x0401f003, 0x4a035017, 0x00000002, 0x1c01f000, + 0x0401f91f, 0x02020800, 0x001005d8, 0x59a80805, + 0x8c040d0c, 0x04000015, 0x84040d0c, 0x48075005, + 0x4a038805, 0x00000010, 0x0201f800, 0x00101937, + 0x59c40005, 0x8c000508, 0x04000008, 0x4a038808, + 0x00000008, 0x4a035033, 0x00000001, 0x4202d800, + 0x00000001, 0x0401f01a, 0x59c40006, 0x84000548, + 0x48038806, 0x0401f016, 0x59a80017, 0x82000580, + 0x00000001, 0x0400000c, 0x59a80017, 0x82000580, + 0x00000005, 0x0402000c, 0x42000000, 0x0010b844, + 0x0201f800, 0x0010aa47, 0x4a035017, 0x00000008, + 0x0401f007, 0x42000000, 0x0010b844, 0x0201f800, + 0x0010aa47, 0x4a035017, 0x00000004, 0x1c01f000, + 0x4803c856, 0x4c040000, 0x4c080000, 0x42000800, + 0x00000064, 0x42001000, 0x00105058, 0x0201f800, + 0x00106079, 0x5c001000, 0x5c000800, 0x1c01f000, + 0x4803c856, 0x4c040000, 0x0201f800, 0x00106c55, + 0x4df00000, 0x0201f800, 0x00106e21, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x0401ffba, 0x5c000800, + 0x1c01f000, 0x4803c856, 0x4c040000, 0x4c080000, + 0x0201f800, 0x00106c55, 0x4df00000, 0x0201f800, + 0x00106e21, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x59c40006, 0x84000500, 0x48038806, 0x0201f800, + 0x00106ede, 0x497b8880, 0x0201f800, 0x0010a9c0, + 0x0201f800, 0x0010a9ce, 0x0201f800, 0x00101815, + 0x4a03504c, 0x00000004, 0x4202d800, 0x00000004, + 0x4a038805, 0x00000001, 0x42001000, 0x00105058, + 0x0201f800, 0x00106084, 0x0201f800, 0x001006d4, + 0x0401f8c1, 0x04000006, 0x42006000, 0xfeffffff, + 0x41786800, 0x0201f800, 0x0010427d, 0x0201f800, + 0x00100452, 0x42000000, 0x00000001, 0x0201f800, + 0x00101590, 0x5c001000, 0x5c000800, 0x1c01f000, + 0x59c40008, 0x8c000508, 0x04020007, 0x4a038808, + 0x00000010, 0x4201d000, 0x00001388, 0x0201f800, + 0x0010608e, 0x1c01f000, 0x4c040000, 0x59a80833, + 0x82040580, 0x00000000, 0x0400000b, 0x82040580, + 0x00000001, 0x0400000b, 0x82040580, 0x00000002, + 0x0400000b, 0x82040580, 0x00000003, 0x0400000b, + 0x0401f057, 0x4a035017, 0x00000000, 0x0401f009, + 0x4a035017, 0x00000004, 0x0401f006, 0x4a035017, + 0x00000001, 0x0401f003, 0x4a035017, 0x00000007, + 0x497b8880, 0x4a038893, 0x00000001, 0x41780000, + 0x0201f800, 0x00101606, 0x0201f800, 0x00106ede, + 0x836c0d80, 0x00000004, 0x04000008, 0x59c40006, + 0x82000500, 0xffffff0f, 0x82000540, 0x04000001, + 0x48038806, 0x0401f007, 0x59c40006, 0x82000500, + 0xffffff0f, 0x82000540, 0x04000000, 0x48038806, + 0x0401f875, 0x04020005, 0x59c40806, 0x82040d00, + 0xfbffff0f, 0x48078806, 0x4200b000, 0x00000005, + 0x59c40005, 0x8c000534, 0x04020033, 0x42006000, + 0xfc18ffff, 0x42006800, 0x01000000, 0x0201f800, + 0x0010427d, 0x0201f800, 0x00101937, 0x59c408a4, + 0x82040d00, 0x0000000f, 0x82040d80, 0x0000000c, + 0x0400000a, 0x42006000, 0xfeffffff, 0x42006800, + 0x02000000, 0x0201f800, 0x0010427d, 0x8058b040, + 0x040207e8, 0x0401f8a1, 0x0401f853, 0x04000006, + 0x42006000, 0xfeffffff, 0x41786800, 0x0201f800, + 0x0010427d, 0x836c0d80, 0x00000004, 0x04000006, + 0x59a8084d, 0x42001000, 0x00105065, 0x0201f800, + 0x0010606e, 0x4a035033, 0x00000004, 0x0401fe31, + 0x0401f841, 0x04020008, 0x59c408a4, 0x82040d00, + 0x0000000f, 0x82040580, 0x0000000c, 0x02020800, + 0x001005d8, 0x5c000800, 0x1c01f000, 0x4803c856, + 0x4c000000, 0x0201f800, 0x0010609e, 0x4a035010, + 0x00ffffff, 0x497b5032, 0x59a8002a, 0x82000500, + 0xffff0000, 0x4803502a, 0x497b8880, 0x497b8893, + 0x41780000, 0x0201f800, 0x00101606, 0x59c40001, + 0x82000500, 0xfffffcff, 0x48038801, 0x42006000, + 0xfc18ffff, 0x41786800, 0x0201f800, 0x0010427d, + 0x4a038808, 0x00000000, 0x5c000000, 0x800001c0, + 0x02020800, 0x0010411d, 0x4a038805, 0x040000f0, + 0x59c40006, 0x82000500, 0xffffffcf, 0x82000540, + 0x440000c1, 0x48038806, 0x1c01f000, 0x4c5c0000, + 0x59a8b832, 0x825cbd80, 0x0000aaaa, 0x5c00b800, + 0x1c01f000, 0x4c5c0000, 0x599cb818, 0x825cbd00, + 0x00000030, 0x825cbd80, 0x00000000, 0x5c00b800, + 0x1c01f000, 0x4c5c0000, 0x599cb818, 0x825cbd00, + 0x00000030, 0x825cbd80, 0x00000010, 0x5c00b800, + 0x1c01f000, 0x4c5c0000, 0x599cb818, 0x825cbd00, + 0x00000030, 0x825cbd80, 0x00000020, 0x5c00b800, + 0x1c01f000, 0x59a80005, 0x4803c857, 0x82000d00, + 0x00000013, 0x04000025, 0x599c1017, 0x4d3c0000, + 0x82000500, 0x00000011, 0x04000007, 0x42027800, + 0x00000400, 0x0201f800, 0x00103b25, 0x0402000a, + 0x0401f012, 0x42027800, 0x00000408, 0x0201f800, + 0x00103b25, 0x0400000d, 0x42003000, 0x00000003, + 0x0401f003, 0x42003000, 0x00000004, 0x42028000, + 0x0000000e, 0x0201f800, 0x0010a449, 0x599c1017, + 0x8c08150a, 0x04020007, 0x42028000, 0x00000004, + 0x0201f800, 0x00101fe5, 0x80000580, 0x0401f80d, + 0x5c027800, 0x0401f00a, 0x0201f800, 0x00103b25, + 0x04000007, 0x42028000, 0x0000000f, 0x42003000, + 0x00000001, 0x0201f800, 0x0010a449, 0x1c01f000, + 0x59a80005, 0x04000004, 0x82000540, 0x00000010, + 0x0401f003, 0x82000500, 0xffffffef, 0x48035005, + 0x4803c857, 0x1c01f000, 0x4803c856, 0x4c580000, + 0x42000000, 0x0010b8cb, 0x0201f800, 0x0010aa47, + 0x42000800, 0x0010c0f1, 0x59c40003, 0x44000800, + 0x59c40004, 0x48000801, 0x59c4000b, 0x48000802, + 0x59c4008e, 0x48000803, 0x59c4008f, 0x48000804, + 0x59c40090, 0x48000805, 0x59c40091, 0x48000806, + 0x59c40092, 0x48000807, 0x59c40093, 0x48000808, + 0x59c40099, 0x48000809, 0x59c4009e, 0x4800080a, + 0x59c400aa, 0x4800080b, 0x59c400af, 0x4800080c, + 0x59c400b2, 0x4800080d, 0x59c400b1, 0x4800080e, + 0x82040c00, 0x0000000f, 0x41c41800, 0x4200b000, + 0x00000030, 0x580c0050, 0x44000800, 0x80040800, + 0x800c1800, 0x8058b040, 0x040207fb, 0x41c41800, + 0x4200b000, 0x00000020, 0x580c0010, 0x44000800, + 0x80040800, 0x800c1800, 0x8058b040, 0x040207fb, + 0x497b8830, 0x4200b000, 0x00000040, 0x59c40031, + 0x44000800, 0x80040800, 0x8058b040, 0x040207fc, + 0x497b88ac, 0x4200b000, 0x00000010, 0x59c400ad, + 0x44000800, 0x80040800, 0x8058b040, 0x040207fc, + 0x59c41001, 0x4c080000, 0x8408150c, 0x480b8801, + 0x4a0370e4, 0x00000300, 0x4a0370e5, 0xb0000000, + 0x42000800, 0x00000800, 0x80040840, 0x02000800, + 0x001005d8, 0x59b800e5, 0x8c000538, 0x040207fb, + 0x4a0370e4, 0x00000200, 0x42006000, 0xffffffff, + 0x42006800, 0x80000000, 0x0201f800, 0x0010427d, + 0x4a038807, 0x00000001, 0x497b8807, 0x4a038808, + 0x00000010, 0x42006000, 0xfcf8ffff, 0x42006800, + 0x01000000, 0x0201f800, 0x0010427d, 0x5c001000, + 0x480b8801, 0x42000800, 0x0010c0f1, 0x50040000, + 0x48038803, 0x58040001, 0x48038804, 0x58040002, + 0x4803880b, 0x58040003, 0x4803888e, 0x58040004, + 0x4803888f, 0x58040005, 0x48038890, 0x58040006, + 0x48038891, 0x58040007, 0x48038892, 0x58040008, + 0x48038893, 0x58040009, 0x48038899, 0x5804000a, + 0x4803889e, 0x5804000b, 0x480388aa, 0x5804000c, + 0x480388af, 0x5804000d, 0x480388b2, 0x5804000e, + 0x480388b1, 0x82040c00, 0x0000000f, 0x41c41800, + 0x4200b000, 0x00000030, 0x50040000, 0x48001850, + 0x80040800, 0x800c1800, 0x8058b040, 0x040207fb, + 0x41c41800, 0x4200b000, 0x00000020, 0x50040000, + 0x48001810, 0x80040800, 0x800c1800, 0x8058b040, + 0x040207fb, 0x497b8830, 0x4200b000, 0x00000040, + 0x50040000, 0x48038831, 0x80040800, 0x8058b040, + 0x040207fc, 0x497b88ac, 0x4200b000, 0x00000010, + 0x50040000, 0x480388ad, 0x80040800, 0x8058b040, + 0x040207fc, 0x497b8880, 0x41780000, 0x0201f800, + 0x00101606, 0x59c408a4, 0x82040d00, 0x0000000f, + 0x82040580, 0x0000000c, 0x02020800, 0x001005d8, + 0x4a038805, 0x04000000, 0x5c00b000, 0x1c01f000, + 0x4803c856, 0x4c580000, 0x4ce80000, 0x42000000, + 0x0010b845, 0x0201f800, 0x0010aa47, 0x59c41008, + 0x4c080000, 0x82080500, 0xffffff7f, 0x48038808, + 0x59c40004, 0x82000500, 0x00003e02, 0x04000005, + 0x4201d000, 0x00000014, 0x0201f800, 0x0010608e, + 0x59c40006, 0x82000500, 0xffffff0f, 0x48038806, + 0x4a038805, 0x00000010, 0x4a038808, 0x00000004, + 0x4200b000, 0x00000065, 0x59c40005, 0x8c000508, + 0x04020012, 0x4201d000, 0x000003e8, 0x0201f800, + 0x0010608e, 0x8058b040, 0x040207f8, 0x0201f800, + 0x00106ede, 0x4a038808, 0x00000008, 0x4a035033, + 0x00000001, 0x4202d800, 0x00000001, 0x82000540, + 0x00000001, 0x0401f030, 0x0201f800, 0x00100ae0, + 0x42000000, 0x0010b8a8, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00100ef4, 0x497b8880, 0x59a8002a, + 0x82000500, 0x0000ffff, 0x4c000000, 0x0201f800, + 0x00101606, 0x5c000000, 0x48038880, 0x4a038808, + 0x00000000, 0x4200b000, 0x00000065, 0x4a038805, + 0x000000f0, 0x0201f800, 0x00101937, 0x42000800, + 0x000000f0, 0x59c40005, 0x80040d00, 0x04000008, + 0x4201d000, 0x000003e8, 0x0201f800, 0x0010608e, + 0x8058b040, 0x040207f2, 0x0401f7d1, 0x59c40006, + 0x82000540, 0x000000f0, 0x48038806, 0x59a8001e, + 0x80000540, 0x04020002, 0x80000000, 0x48038893, + 0x80000580, 0x5c001000, 0x4df00000, 0x0201f800, + 0x0010195d, 0x5c03e000, 0x480b8808, 0x5c01d000, + 0x5c00b000, 0x1c01f000, 0x4803c856, 0x4c580000, + 0x4ce80000, 0x59c41008, 0x82080500, 0xffffff7f, + 0x48038808, 0x4c080000, 0x59c40004, 0x82000500, + 0x00003e02, 0x04000005, 0x4201d000, 0x00000014, + 0x0201f800, 0x0010608e, 0x0201f800, 0x00100ae0, + 0x42000000, 0x0010b8a9, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00100ef4, 0x4a038808, 0x00000002, + 0x80000580, 0x48038880, 0x48038893, 0x0201f800, + 0x00101606, 0x4200b000, 0x00000384, 0x4a038805, + 0x000000f0, 0x0201f800, 0x00101937, 0x42000800, + 0x000000f0, 0x59c40005, 0x80040d00, 0x04000015, + 0x82000500, 0x000000d0, 0x04020012, 0x4201d000, + 0x00000067, 0x0201f800, 0x0010608e, 0x8058b040, + 0x040207ef, 0x0201f800, 0x00106ede, 0x4a038808, + 0x00000008, 0x4a035033, 0x00000001, 0x4202d800, + 0x00000001, 0x82000540, 0x00000001, 0x0401f010, + 0x497b8880, 0x59a8001e, 0x80000540, 0x04020002, + 0x80000000, 0x48038893, 0x59a8002a, 0x82000500, + 0x0000ffff, 0x4c000000, 0x0201f800, 0x00101606, + 0x5c000000, 0x48038880, 0x80000580, 0x5c001000, + 0x4df00000, 0x0201f800, 0x0010195d, 0x5c03e000, + 0x480b8808, 0x5c01d000, 0x5c00b000, 0x1c01f000, + 0x4803c856, 0x59c40004, 0x82000500, 0x00003e02, + 0x0400000a, 0x0201f800, 0x00106ede, 0x4a038808, + 0x00000008, 0x4a035033, 0x00000001, 0x4202d800, + 0x00000001, 0x0401f052, 0x0201f800, 0x00100ae0, + 0x42000000, 0x0010b8aa, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00100ef4, 0x59c40006, 0x84000508, + 0x48038806, 0x4a038805, 0x00000010, 0x59a80805, + 0x84040d4c, 0x48075005, 0x42000800, 0x00000064, + 0x42001000, 0x00105058, 0x0201f800, 0x0010606e, + 0x4a038808, 0x00000000, 0x497b8880, 0x4a038805, + 0x000000f0, 0x0201f800, 0x00101937, 0x42000800, + 0x000000f0, 0x59c40005, 0x80040d00, 0x0400000e, + 0x82000500, 0x000000e0, 0x0402000b, 0x4201d000, + 0x000003e8, 0x0201f800, 0x0010608e, 0x0201f800, + 0x00105f48, 0x59940004, 0x80000540, 0x040207ec, + 0x0401f023, 0x4c080000, 0x42001000, 0x00105065, + 0x0201f800, 0x00105f90, 0x42001000, 0x00105058, + 0x0201f800, 0x00106084, 0x5c001000, 0x497b8880, + 0x59a8001e, 0x80000540, 0x04020002, 0x80000000, + 0x48038893, 0x59a8002a, 0x82000500, 0x0000ffff, + 0x4c000000, 0x0201f800, 0x00101606, 0x5c000000, + 0x48038880, 0x59a80805, 0x84040d0c, 0x48075005, + 0x59c40006, 0x84000548, 0x48038806, 0x0201f800, + 0x0010195d, 0x4a038808, 0x00000080, 0x1c01f000, + 0x4803c856, 0x4d400000, 0x4d3c0000, 0x0201f800, + 0x00106ede, 0x0201f800, 0x0010ab33, 0x04020025, + 0x599c1017, 0x59a80805, 0x8c040d00, 0x0402000c, + 0x8c08151a, 0x0400001f, 0x84040d42, 0x48075005, + 0x42028000, 0x00000004, 0x42027800, 0x0000000c, + 0x8c081508, 0x04020008, 0x0401f012, 0x42028000, + 0x00000004, 0x42027800, 0x00000004, 0x8c081508, + 0x0400000c, 0x4d400000, 0x42028000, 0x0000000e, + 0x42028800, 0x0000ffff, 0x0201f800, 0x0010a446, + 0x5c028000, 0x599c0817, 0x8c040d0a, 0x04020005, + 0x4943c857, 0x493fc857, 0x0201f800, 0x00101fe5, + 0x497b8880, 0x4202d800, 0x00000001, 0x0401fcfb, + 0x5c027800, 0x5c028000, 0x1c01f000, 0x0201f800, + 0x00100ae0, 0x42000000, 0x0010b8ab, 0x0201f800, + 0x0010aa47, 0x0201f800, 0x00100ef4, 0x42000000, + 0x00000001, 0x0201f800, 0x00101606, 0x4a038880, + 0x00000001, 0x0201f000, 0x0010195d, 0x4202e000, + 0x00000000, 0x4a033015, 0x00000001, 0x497b301d, + 0x497b3006, 0x4a03b004, 0x60000001, 0x59d80005, + 0x4a03b004, 0x90000001, 0x4a03a804, 0x60000001, + 0x59d40005, 0x4a03a804, 0x90000001, 0x0201f000, + 0x00105983, 0x4a03c825, 0x00000004, 0x4a03c827, + 0x00000004, 0x599c0409, 0x80000d40, 0x04000020, + 0x599c0407, 0x80000540, 0x04000007, 0x800000cc, + 0x599c100b, 0x80080400, 0x4803b000, 0x497bb002, + 0x59d80001, 0x599c000b, 0x4803b000, 0x599c000c, + 0x4803b001, 0x599c0407, 0x80000540, 0x04020002, + 0x497bb002, 0x599c0c09, 0x82040540, 0x00400000, + 0x4803b003, 0x4a03b009, 0x00000004, 0x4a03b004, + 0x10000001, 0x59e00803, 0x82040d00, 0xfffffeff, + 0x82040d40, 0x00008000, 0x4807c003, 0x599c040a, + 0x80000540, 0x04000020, 0x599c0408, 0x80000540, + 0x04000007, 0x800000cc, 0x599c100f, 0x80080400, + 0x4803a800, 0x497ba802, 0x59d40001, 0x599c000f, + 0x4803a800, 0x599c0010, 0x4803a801, 0x599c0408, + 0x80000540, 0x04020002, 0x497ba802, 0x599c0c0a, + 0x82040540, 0x00400000, 0x4803a803, 0x4a03a809, + 0x00000004, 0x4a03a804, 0x10000001, 0x59e00803, + 0x82040d00, 0xfffffbff, 0x82040d40, 0x00008000, + 0x4807c003, 0x800409c0, 0x04000007, 0x4202e000, + 0x00000001, 0x0200b800, 0x00020551, 0x0200f000, + 0x00020566, 0x1c01f000, 0x0201f800, 0x001005d8, + 0x1c01f000, 0x4df00000, 0x4203e000, 0x50000000, + 0x59981005, 0x800811c0, 0x0400001e, 0x58080005, + 0x82000d00, 0x43018780, 0x02020000, 0x00105846, + 0x8c000508, 0x04000015, 0x580a5808, 0x592c0204, + 0x497a5800, 0x497a5801, 0x82000500, 0x000000ff, + 0x82000c80, 0x0000004b, 0x0402100b, 0x0c01f80f, + 0x5c03e000, 0x83700580, 0x00000003, 0x040007e6, + 0x0200f800, 0x00020566, 0x0200b000, 0x00020551, + 0x1c01f000, 0x0401f850, 0x5c03e000, 0x0401f7f9, + 0x0401f8de, 0x0401f7fd, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x001054a1, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105519, 0x00105491, 0x00105491, 0x001054a1, + 0x001054a1, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x492fc857, 0x42000000, 0x0010b85e, + 0x0201f800, 0x0010aa47, 0x42000000, 0x00000400, + 0x0401f019, 0x492fc857, 0x42000000, 0x0010b85d, + 0x0201f800, 0x0010aa47, 0x42000000, 0x00001000, + 0x0401f011, 0x492fc857, 0x42000000, 0x0010b85c, + 0x0201f800, 0x0010aa47, 0x42000000, 0x00002000, + 0x0401f009, 0x492fc857, 0x42000000, 0x0010b85f, + 0x0201f800, 0x0010aa47, 0x42000000, 0x00000800, + 0x0401f001, 0x4803c857, 0x4202e000, 0x00000001, + 0x592c0c04, 0x82040d00, 0xffff80ff, 0x80040540, + 0x48025c04, 0x0201f000, 0x000202da, 0x592c0204, + 0x492fc857, 0x80000110, 0x040007db, 0x80000040, + 0x04000025, 0x48033002, 0x492f3003, 0x492f3004, + 0x4a033008, 0x001054e5, 0x4202e000, 0x00000003, + 0x1c01f000, 0x592c0204, 0x492fc857, 0x80000110, + 0x040007cd, 0x80000040, 0x04000033, 0x48033002, + 0x492f3003, 0x492f3004, 0x4a033008, 0x00105501, + 0x4202e000, 0x00000003, 0x1c01f000, 0x0201f800, + 0x0010ab33, 0x02020000, 0x000204d9, 0x42028000, + 0x00000028, 0x41780800, 0x417a6000, 0x0201f800, + 0x00104e70, 0x0201f800, 0x001091c6, 0x0201f000, + 0x000202da, 0x592c0a0a, 0x8c040d02, 0x04020016, + 0x59a80021, 0x492fc857, 0x80000540, 0x0402000f, + 0x592c0207, 0x80000540, 0x04000005, 0x0201f800, + 0x00104326, 0x04020004, 0x1c01f000, 0x42000000, + 0x00000000, 0x592c0a06, 0x48065c06, 0x48025a06, + 0x0201f000, 0x000202da, 0x42000000, 0x00000028, + 0x0401f7f9, 0x42000800, 0x00000009, 0x0201f000, + 0x0010665b, 0x592c0208, 0x492fc857, 0x82000c80, + 0x0000199a, 0x040217a4, 0x592c0408, 0x80000540, + 0x040207a1, 0x59a80821, 0x800409c0, 0x04020009, + 0x592c0207, 0x80000540, 0x0400079b, 0x497a5a06, + 0x0201f800, 0x00104385, 0x04020004, 0x1c01f000, + 0x42000000, 0x00000028, 0x48025a06, 0x0201f000, + 0x000202da, 0x59980804, 0x59980002, 0x48065800, + 0x492c0801, 0x492f3004, 0x80000040, 0x48033002, + 0x04000002, 0x1c01f000, 0x599a5803, 0x59980008, + 0x4202e000, 0x00000001, 0x0801f000, 0x592e8a06, + 0x592c0406, 0x4803c856, 0x82000500, 0x000000ff, + 0x4200b800, 0x00000001, 0x82000d80, 0x00000001, + 0x04000015, 0x417a8800, 0x4200b800, 0x000007f0, + 0x82000d80, 0x00000002, 0x0400000f, 0x80000540, + 0x02020000, 0x000202da, 0x592e8a06, 0x0201f800, + 0x00020245, 0x02020000, 0x000202da, 0x592e9008, + 0x592e9809, 0x0201f800, 0x00104713, 0x0201f000, + 0x000202da, 0x59a80805, 0x84040d00, 0x48075005, + 0x0201f800, 0x00020245, 0x02000800, 0x0010482c, + 0x81468800, 0x805cb840, 0x040207fa, 0x0201f000, + 0x000202da, 0x592c0a08, 0x4807c857, 0x82040580, + 0x0000000e, 0x04000045, 0x82040580, 0x00000046, + 0x04000046, 0x82040580, 0x00000045, 0x04000020, + 0x82040580, 0x00000029, 0x04000010, 0x82040580, + 0x0000002a, 0x04000009, 0x82040580, 0x0000000f, + 0x040001fc, 0x82040580, 0x0000002e, 0x040001f9, + 0x4807c856, 0x0401f1f2, 0x59a80805, 0x84040d04, + 0x48075005, 0x0401f1f3, 0x592e8a06, 0x0201f800, + 0x00020245, 0x040201ef, 0x59340200, 0x84000518, + 0x48026a00, 0x592e6009, 0x4933c857, 0x83300580, + 0xffffffff, 0x0402002a, 0x0401f1e6, 0x592c1407, + 0x480bc857, 0x0201f800, 0x00109410, 0x411e6000, + 0x04020003, 0x4803c856, 0x0401f1d9, 0x592e3809, + 0x591c1414, 0x84081516, 0x84081554, 0x480a3c14, + 0x4a026403, 0x0000003a, 0x592c040b, 0x80000540, + 0x04000007, 0x4a026403, 0x0000003b, 0x592c020c, + 0x4802641a, 0x592c040c, 0x4802621a, 0x4a026203, + 0x00000001, 0x42000800, 0x80000040, 0x0201f800, + 0x00020721, 0x0401f1c7, 0x59a80068, 0x84000510, + 0x48035068, 0x0401f1c3, 0x592c1207, 0x8c081500, + 0x040201c0, 0x592e8a06, 0x592e6009, 0x0201f800, + 0x0010941a, 0x04020003, 0x4803c856, 0x0401f1b4, + 0x59300c06, 0x82040580, 0x00000004, 0x04000003, + 0x4803c856, 0x0401f1ae, 0x59300a03, 0x82040580, + 0x00000007, 0x04000003, 0x4803c856, 0x0401f1a8, + 0x59300c03, 0x82040580, 0x00000001, 0x04000021, + 0x82040580, 0x00000003, 0x04000016, 0x82040580, + 0x00000006, 0x04000020, 0x82040580, 0x00000008, + 0x04000015, 0x82040580, 0x0000000a, 0x0400000a, + 0x82040580, 0x0000000c, 0x04000004, 0x82040580, + 0x0000002e, 0x04020018, 0x42000800, 0x00000009, + 0x0401f013, 0x42000800, 0x00000005, 0x0401f010, + 0x417a7800, 0x0201f800, 0x0010203c, 0x4a026406, + 0x00000001, 0x42000800, 0x00000003, 0x0401f008, + 0x417a7800, 0x0201f800, 0x0010203c, 0x4a026406, + 0x00000001, 0x42000800, 0x0000000b, 0x0201f800, + 0x00104571, 0x4a026203, 0x00000001, 0x0201f800, + 0x0010672b, 0x0401f17b, 0x40000800, 0x58040000, + 0x80000540, 0x040207fd, 0x492c0800, 0x1c01f000, + 0x492fc857, 0x59300c06, 0x82040580, 0x00000006, + 0x04020094, 0x0201f800, 0x001049e7, 0x04020005, + 0x59340200, 0x8c00051a, 0x02000000, 0x00020533, + 0x59340200, 0x8c00050e, 0x0400008a, 0x59300203, + 0x42027800, 0x00000001, 0x82000580, 0x00000007, + 0x02020000, 0x00020533, 0x4a026203, 0x00000002, + 0x0201f000, 0x00020533, 0x42028000, 0x00000002, + 0x4a026206, 0x00000014, 0x4d2c0000, 0x0201f800, + 0x0010a1d1, 0x5c025800, 0x59300c06, 0x4807c857, + 0x82040580, 0x00000007, 0x04020063, 0x492fc857, + 0x4a025a06, 0x00000001, 0x0201f000, 0x000202da, + 0x592c240a, 0x492fc857, 0x4813c857, 0x8c10251c, + 0x04020016, 0x8c10251a, 0x04000003, 0x8c10250a, + 0x04000069, 0x59340a00, 0x8c040d0e, 0x04000003, + 0x8c10251e, 0x04000064, 0x0201f800, 0x0002075a, + 0x0400006b, 0x592c240a, 0x49366009, 0x49325809, + 0x4a026406, 0x00000006, 0x4a026203, 0x00000007, + 0x0201f000, 0x0002052f, 0x592c0a0c, 0x5934000f, + 0x41784000, 0x80001540, 0x0400006d, 0x58080204, + 0x82000500, 0x000000ff, 0x82000580, 0x00000012, + 0x04020004, 0x5808020c, 0x80040580, 0x04000004, + 0x58080000, 0x40084000, 0x0401f7f3, 0x58080000, + 0x49781000, 0x802041c0, 0x04000006, 0x48004000, + 0x80000540, 0x04020007, 0x48226810, 0x0401f005, + 0x4802680f, 0x80000540, 0x04020002, 0x497a6810, + 0x4d2c0000, 0x400a5800, 0x4a025a06, 0x00000002, + 0x0201f800, 0x000202da, 0x5c025800, 0x0401f7bc, + 0x592c040a, 0x8c00051c, 0x04000016, 0x592c0206, + 0x82000580, 0x0000ffff, 0x04020012, 0x592e6009, + 0x83300580, 0xffffffff, 0x040007b1, 0x83300480, + 0x0010d1c0, 0x04001010, 0x59a8000b, 0x81300480, + 0x0402100d, 0x59300008, 0x800001c0, 0x04020005, + 0x59300203, 0x82000580, 0x00000007, 0x04000797, + 0x492fc857, 0x4a025a06, 0x00000029, 0x0201f000, + 0x000202da, 0x492fc857, 0x4a025a06, 0x00000008, + 0x0201f000, 0x000202da, 0x492fc857, 0x4a025a06, + 0x00000045, 0x0201f000, 0x000202da, 0x492fc857, + 0x4a025a06, 0x0000002a, 0x0201f000, 0x000202da, + 0x492fc857, 0x4a025a06, 0x00000028, 0x0201f000, + 0x000202da, 0x492fc857, 0x4a025a06, 0x00000006, + 0x0201f000, 0x000202da, 0x492fc857, 0x4a025a06, + 0x0000000e, 0x0201f000, 0x000202da, 0x59340010, + 0x492e6810, 0x492fc857, 0x80000d40, 0x04000003, + 0x492c0800, 0x1c01f000, 0x5934040b, 0x492e680f, + 0x492fc857, 0x4803c857, 0x80000540, 0x04020003, + 0x4a026a03, 0x00000001, 0x1c01f000, 0x59a8000e, + 0x81640480, 0x0402176e, 0x42026000, 0x0010d1c0, + 0x59300009, 0x81340580, 0x04020004, 0x59300202, + 0x80040580, 0x04000759, 0x83326400, 0x00000024, + 0x41580000, 0x81300480, 0x040017f6, 0x0401f760, + 0x492fc857, 0x592c0407, 0x82000c80, 0x0000199a, + 0x040215f1, 0x592c0204, 0x80000112, 0x040205de, + 0x592e8a06, 0x0201f800, 0x00020245, 0x04020059, + 0x0201f800, 0x001049e7, 0x04020059, 0x592e780a, + 0x493fc857, 0x8d3e7d3e, 0x04020007, 0x59a80021, + 0x80000540, 0x0402004f, 0x0201f800, 0x00104838, + 0x040005dd, 0x833c1d00, 0x0000001f, 0x040005da, + 0x592c0207, 0x82000c80, 0x00001000, 0x040215d6, + 0x800000c2, 0x800008c4, 0x8005d400, 0x592e9008, + 0x592e9809, 0x5934080d, 0x800409c0, 0x0402002e, + 0x833c1d00, 0x0000001f, 0x81780040, 0x80000000, + 0x800c1902, 0x040217fe, 0x040205c7, 0x0c01f001, + 0x001056e9, 0x001056ec, 0x001056f9, 0x001056fc, + 0x001056ff, 0x0201f800, 0x0010903e, 0x0401f01a, + 0x0201f800, 0x0010480b, 0x04000027, 0x80e9d1c0, + 0x02020800, 0x00105fae, 0x42028000, 0x00000005, + 0x417a9000, 0x417a9800, 0x0201f800, 0x0010904e, + 0x0401f00d, 0x42027000, 0x0000004d, 0x0401f006, + 0x42027000, 0x0000004e, 0x0401f003, 0x42027000, + 0x00000052, 0x0201f800, 0x001046c9, 0x02020800, + 0x0010907e, 0x04000010, 0x8d3e7d3e, 0x04020017, + 0x1c01f000, 0x58040002, 0x80000540, 0x04020007, + 0x4d3c0000, 0x40067800, 0x0201f800, 0x001047eb, + 0x5c027800, 0x040207cb, 0x4a025a06, 0x00000030, + 0x0401f00d, 0x4a025a06, 0x0000002c, 0x0401f00a, + 0x4a025a06, 0x00000028, 0x0401f007, 0x4a025a06, + 0x00000029, 0x0401f004, 0x497a5c09, 0x4a025a06, + 0x00000000, 0x4a025a04, 0x00000103, 0x0201f000, + 0x000202da, 0x492fc857, 0x592c0204, 0x80000110, + 0x80000040, 0x04000002, 0x0401f56f, 0x592c0207, + 0x82000500, 0x000003ff, 0x48025a07, 0x8c000506, + 0x04000004, 0x82000500, 0x00000070, 0x04020004, + 0x59a80821, 0x800409c0, 0x04020018, 0x4a025a06, + 0x0000dead, 0x592c0408, 0x82000500, 0x0000f0ff, + 0x48025c08, 0x0201f800, 0x001043b4, 0x04020002, + 0x1c01f000, 0x49425a06, 0x8058b1c0, 0x04000009, + 0x0201f800, 0x0010955f, 0x0401f80f, 0x44042800, + 0x82580580, 0x00000002, 0x04020002, 0x48082801, + 0x0201f000, 0x000202da, 0x42028000, 0x00000031, + 0x42000800, 0x00000001, 0x4200b000, 0x00000001, + 0x0401f7ed, 0x592c0408, 0x80000118, 0x832c2c00, + 0x00000009, 0x80142c00, 0x1c01f000, 0x492fc857, + 0x4a025a08, 0x00000006, 0x0201f000, 0x000202da, + 0x492fc857, 0x4a025a08, 0x00000001, 0x0201f000, + 0x000202da, 0x492fc857, 0x592c040a, 0x82000500, + 0x00000003, 0x04000020, 0x0201f800, 0x0002075a, + 0x04000021, 0x592c0204, 0x492e6008, 0x82000500, + 0x000000ff, 0x82000580, 0x00000045, 0x0400000e, + 0x592c000b, 0x0201f800, 0x00105c9a, 0x02000800, + 0x00020245, 0x04020018, 0x42027000, 0x00000041, + 0x49366009, 0x4a026406, 0x00000001, 0x0201f000, + 0x000207a1, 0x59300015, 0x8400055e, 0x48026015, + 0x42026800, 0x0010b524, 0x42027000, 0x00000040, + 0x0401f7f4, 0x4a025a06, 0x00000101, 0x0201f000, + 0x000202da, 0x4a025a06, 0x0000002c, 0x0201f000, + 0x000202da, 0x4a025a06, 0x00000028, 0x0201f800, + 0x000202da, 0x0201f000, 0x0002077d, 0x492fc857, + 0x0201f800, 0x001062e1, 0x0400000b, 0x592c0204, + 0x80000110, 0x80000040, 0x040204fb, 0x592c0c06, + 0x800409c0, 0x04000009, 0x42000000, 0x00000102, + 0x0401f003, 0x42000000, 0x00000104, 0x48025a06, + 0x0201f000, 0x000202da, 0x592c0c07, 0x800409c0, + 0x04000024, 0x82040480, 0x00000005, 0x04021021, + 0x4c040000, 0x80040800, 0x0201f800, 0x00106306, + 0x5c001000, 0x04020018, 0x832c0400, 0x00000008, + 0x4000a000, 0x0201f800, 0x0010632f, 0x04020012, + 0x592c1207, 0x82cc0580, 0x0010b50e, 0x04020009, + 0x58c80c0b, 0x84040d00, 0x84040d02, 0x8c081500, + 0x04000002, 0x84040d5e, 0x4805940b, 0x0401f001, + 0x42000000, 0x00000000, 0x48025a06, 0x0201f000, + 0x000202da, 0x42000000, 0x00000103, 0x0401f7fb, + 0x42000000, 0x00000102, 0x0401f7f8, 0x492fc857, + 0x592e7c06, 0x833c0500, 0xfffffffe, 0x04020043, + 0x592c4007, 0x42026000, 0x0010d1c0, 0x41581800, + 0x400c0000, 0x81300480, 0x04021023, 0x59300203, + 0x82000580, 0x00000000, 0x04000007, 0x59300008, + 0x80000d40, 0x04000004, 0x58040005, 0x80200580, + 0x04000004, 0x83326400, 0x00000024, 0x0401f7f1, + 0x58040204, 0x82000500, 0x000000ff, 0x82000d80, + 0x00000053, 0x04000007, 0x82000d80, 0x00000048, + 0x04000004, 0x82000580, 0x00000018, 0x04020023, + 0x4d2c0000, 0x0201f800, 0x00108be3, 0x5c025800, + 0x0400001e, 0x4a025a06, 0x00000000, 0x0201f000, + 0x000202da, 0x592e8a06, 0x83440480, 0x000007f0, + 0x04021016, 0x83440400, 0x0010ac00, 0x50000000, + 0x80026d40, 0x04000011, 0x4d2c0000, 0x0201f800, + 0x001047cb, 0x0400000c, 0x42028000, 0x00000005, + 0x592c0a08, 0x0201f800, 0x00104e70, 0x0201f800, + 0x001091cc, 0x0201f800, 0x000202da, 0x5c025800, + 0x0401f7e5, 0x5c025800, 0x4a025a06, 0x00000031, + 0x0201f000, 0x000202da, 0x492fc857, 0x4d2c0000, + 0x0201f800, 0x001007e4, 0x04000016, 0x492fc857, + 0x412f4000, 0x0201f800, 0x001007e4, 0x0400000e, + 0x492fc857, 0x412dd800, 0x0201f800, 0x00103b28, + 0x0201f800, 0x00103b32, 0x49a1d80b, 0x5c025800, + 0x492dd80a, 0x0201f800, 0x00102214, 0x0201f000, + 0x00102233, 0x41a25800, 0x0201f800, 0x001007f4, + 0x5c025800, 0x4a025a06, 0x00004005, 0x4a025c06, + 0x00000002, 0x0201f000, 0x000202da, 0x4807c857, + 0x485fc857, 0x4200b800, 0x00000001, 0x5c000800, + 0x4c5c0000, 0x0401f005, 0x4807c857, 0x485fc857, + 0x5c000800, 0x4d780000, 0x4803c857, 0x492fc857, + 0x8c00050e, 0x02020800, 0x001005d0, 0x4203e000, + 0x50000000, 0x4200b800, 0x00008003, 0x0201f000, + 0x001005dd, 0x592c0204, 0x80000110, 0x80000040, + 0x04020441, 0x0201f800, 0x00104a34, 0x04020002, + 0x1c01f000, 0x49425a06, 0x4806580d, 0x480a580e, + 0x4943c857, 0x4807c857, 0x480bc857, 0x0201f000, + 0x000202da, 0x592c0204, 0x80000110, 0x80000040, + 0x04020431, 0x0201f800, 0x00104b8b, 0x04020002, + 0x1c01f000, 0x49425a06, 0x48065811, 0x480a5812, + 0x0201f000, 0x000202da, 0x592c0204, 0x80000110, + 0x04000425, 0x80000040, 0x0402000c, 0x4202e000, + 0x00000001, 0x592c020a, 0x8c000504, 0x02000000, + 0x000204d0, 0x592c0207, 0x82000c80, 0x00001001, + 0x04021429, 0x0401f009, 0x4202e000, 0x00000003, + 0x48033002, 0x492f3003, 0x492f3004, 0x4a033008, + 0x000204d0, 0x1c01f000, 0x4202e000, 0x00000002, + 0x42000000, 0x0010beda, 0x50007000, 0x492c700b, + 0x4978700e, 0x4978700c, 0x592c0011, 0x592c0812, + 0x48007007, 0x48047008, 0x592c1013, 0x82080500, + 0xffff0000, 0x04000003, 0x0201f800, 0x001005d8, + 0x4978700d, 0x82080480, 0x00000180, 0x4803c857, + 0x04001007, 0x4800700f, 0x4a007005, 0x00000180, + 0x4a007004, 0x00000060, 0x0401f005, 0x4978700f, + 0x48087005, 0x80081104, 0x48087004, 0x5838000a, + 0x48007003, 0x40381000, 0x0201f000, 0x00100858, + 0x0201f800, 0x001007d3, 0x04000003, 0x59980007, + 0x0801f000, 0x1c01f000, 0x40307000, 0x5838000b, + 0x80025d40, 0x0400001b, 0x58380002, 0x82000580, + 0x00000100, 0x0400001d, 0x4c380000, 0x592c0204, + 0x82000500, 0x000000ff, 0x82000580, 0x00000012, + 0x0400000b, 0x592c0208, 0x8400054e, 0x48025a08, + 0x4a025a06, 0x00000002, 0x4a025a04, 0x00000103, + 0x0201f800, 0x000202c1, 0x0401f005, 0x4a025a06, + 0x00000010, 0x0201f800, 0x000202da, 0x5c007000, + 0x4202e000, 0x00000001, 0x4a007002, 0x00000100, + 0x49787010, 0x1c01f000, 0x58380004, 0x82000480, + 0x00000003, 0x04000087, 0x58380010, 0x8c000500, + 0x04020019, 0x4200b000, 0x00000003, 0x832cac00, + 0x00000011, 0x5838000a, 0x5838100d, 0x8008a400, + 0x4c380000, 0x0201f800, 0x0010ab17, 0x5c007000, + 0x5838000d, 0x82000400, 0x00000003, 0x4800700d, + 0x4a007010, 0x00000001, 0x58380004, 0x82000480, + 0x00000003, 0x48007004, 0x82000580, 0x00000003, + 0x0400006c, 0x5838000e, 0x80001d40, 0x04020020, + 0x4c380000, 0x0201f800, 0x001007d3, 0x5c007000, + 0x04000010, 0x4a025a04, 0x0000010a, 0x42001800, + 0x00000005, 0x480c700e, 0x5838000c, 0x80000540, + 0x04020002, 0x5838000b, 0x40000800, 0x492c0801, + 0x492c700c, 0x42000800, 0x0000000f, 0x0401f011, + 0x4202e000, 0x00000008, 0x4a033007, 0x00105915, + 0x1c01f000, 0x4202e000, 0x00000002, 0x42000000, + 0x0010beda, 0x50007000, 0x0401f7e7, 0x583a580c, + 0x400c0000, 0x42000800, 0x00000014, 0x80040c80, + 0x58381004, 0x5838000f, 0x41783000, 0x80000540, + 0x04020005, 0x84183540, 0x82081480, 0x00000003, + 0x0400003c, 0x40080000, 0x80040480, 0x04001002, + 0x40080800, 0x4004b000, 0x412c0000, 0x800c0400, + 0x4000a800, 0x5838000a, 0x5838100d, 0x8008a400, + 0x4c080000, 0x4c040000, 0x4c0c0000, 0x4c380000, + 0x0201f800, 0x0010ab17, 0x5c007000, 0x5c001800, + 0x5c000800, 0x40040000, 0x58381004, 0x80080480, + 0x48007004, 0x82000580, 0x00000003, 0x04000002, + 0x84183500, 0x5c000000, 0x80041400, 0x82080480, + 0x00000060, 0x04020003, 0x84183542, 0x41781000, + 0x400c0000, 0x80041c00, 0x820c0480, 0x00000014, + 0x04020003, 0x84183544, 0x40001800, 0x40080800, + 0x4804700d, 0x480c700e, 0x40180000, 0x0c01f001, + 0x00105960, 0x00105964, 0x00105962, 0x00105960, + 0x001058fc, 0x00105964, 0x00105962, 0x00105960, + 0x0201f800, 0x001005d8, 0x5838100f, 0x0401f739, + 0x5838080d, 0x82040400, 0x00000002, 0x5838100a, + 0x80080400, 0x50001000, 0x800811c0, 0x0402000f, + 0x4202e000, 0x00000001, 0x583a580b, 0x4978700b, + 0x49787010, 0x592c0204, 0x82000500, 0x000000ff, + 0x82000580, 0x00000012, 0x02000000, 0x00020507, + 0x0201f000, 0x000204d0, 0x5838000a, 0x80040c00, + 0x82381c00, 0x00000007, 0x54041800, 0x80040800, + 0x800c1800, 0x54041800, 0x0401f71a, 0x0201f800, + 0x001007d3, 0x02000800, 0x001005d8, 0x4a02580a, + 0x0010be79, 0x42000800, 0x0010beda, 0x452c0800, + 0x497a580b, 0x497a580c, 0x497a580d, 0x497a580e, + 0x497a580f, 0x4a025809, 0x001058b6, 0x497a5810, + 0x4a025802, 0x00000100, 0x4a025801, 0x00000001, + 0x1c01f000, 0x59c80007, 0x8c000502, 0x04000070, + 0x835c2c80, 0x00000005, 0x02001000, 0x00105f23, + 0x59c82817, 0x497b9005, 0x82140500, 0x00e00000, + 0x0402004f, 0x82140500, 0x000003ff, 0x82001c00, + 0x00000006, 0x41cc2000, 0x42003000, 0x00006080, + 0x820c0480, 0x00000040, 0x04001006, 0x42001000, + 0x00000040, 0x820c1c80, 0x00000040, 0x0401f003, + 0x400c1000, 0x41781800, 0x54182000, 0x80102000, + 0x80183000, 0x80081040, 0x040207fc, 0x800c19c0, + 0x04000005, 0x59c80005, 0x80000000, 0x48039005, + 0x0401f7ea, 0x82140500, 0x01f60000, 0x04020029, + 0x82140500, 0x0000f000, 0x0400000b, 0x82000c80, + 0x00002000, 0x0402100f, 0x82140500, 0x0e000000, + 0x80000132, 0x0c01f840, 0x4a039005, 0x00000140, + 0x1c01f000, 0x59cc0400, 0x82000500, 0x0000ff00, + 0x82000580, 0x00008100, 0x040007f4, 0x0401f01c, + 0x4817c857, 0x82140500, 0x000003ff, 0x04020007, + 0x59cc0400, 0x82000500, 0x0000ff00, 0x82000580, + 0x00008100, 0x04020012, 0x42000000, 0x0010b8bd, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x00105dfa, + 0x4803c856, 0x4a039005, 0x00000140, 0x0401f020, + 0x4817c857, 0x82140500, 0x00f60000, 0x04020004, + 0x0201f800, 0x00105e35, 0x040207d2, 0x0201f800, + 0x0010513b, 0x04000010, 0x59c400a4, 0x4803c857, + 0x82000500, 0x0000000f, 0x82000580, 0x0000000a, + 0x04020009, 0x497b5016, 0x59c400a3, 0x82000540, + 0x00080000, 0x480388a3, 0x82000500, 0xfff7ffff, + 0x480388a3, 0x4817c856, 0x0201f800, 0x0010a978, + 0x4a039005, 0x00000140, 0x0401f842, 0x4803c856, + 0x1c01f000, 0x00105a1d, 0x00105cf4, 0x00105a15, + 0x00105a15, 0x00105a15, 0x00105a15, 0x00105a15, + 0x00105a15, 0x4803c857, 0x42000000, 0x0010b85a, + 0x0201f800, 0x0010aa47, 0x4a039005, 0x00000140, + 0x1c01f000, 0x4817c857, 0x59cc0400, 0x4803c857, + 0x82000d00, 0x0000ff00, 0x82041500, 0x0000f000, + 0x840409c0, 0x82140500, 0x000003ff, 0x800018c4, + 0x8c142d14, 0x04000005, 0x59cc0002, 0x82000500, + 0x00000003, 0x800c1c80, 0x480f5016, 0x82080580, + 0x00002000, 0x04020011, 0x836c0580, 0x00000001, + 0x0402000c, 0x59cc0006, 0x82000500, 0xff000000, + 0x82000580, 0x11000000, 0x04020011, 0x0201f800, + 0x00103b38, 0x0201f800, 0x00105f48, 0x0401f00c, + 0x0401f81f, 0x0401f00a, 0x82080580, 0x00003000, + 0x04020003, 0x0401fa06, 0x0401f005, 0x82080580, + 0x00008000, 0x04020002, 0x0401fafc, 0x1c01f000, + 0x4817c857, 0x42000000, 0x0010b859, 0x0201f800, + 0x0010aa47, 0x836c0580, 0x00000003, 0x0402000b, + 0x4c080000, 0x4c0c0000, 0x42001000, 0x00008048, + 0x40141800, 0x80142120, 0x0201f800, 0x00103a3e, + 0x5c001800, 0x5c001000, 0x1c01f000, 0x4807c857, + 0x59cc0002, 0x82000500, 0xff000000, 0x82001580, + 0x01000000, 0x04000004, 0x82001580, 0x23000000, + 0x04020192, 0x82040580, 0x00000023, 0x0402003f, + 0x0401fb6a, 0x0400018d, 0x59300c06, 0x82040580, + 0x00000010, 0x04000013, 0x82040580, 0x00000011, + 0x04000010, 0x82040580, 0x00000001, 0x0400000d, + 0x82040580, 0x00000004, 0x0400000a, 0x82040580, + 0x00000008, 0x04000007, 0x82040580, 0x0000000a, + 0x04000004, 0x4933c857, 0x4807c857, 0x0401f177, + 0x59300004, 0x82000500, 0x80010000, 0x04000004, + 0x0201f800, 0x00106f60, 0x04020170, 0x59cc0a04, + 0x48066202, 0x59cc0006, 0x82000500, 0xffff0000, + 0x82000d80, 0x02000000, 0x04020005, 0x42027000, + 0x00000015, 0x0201f000, 0x000207a1, 0x82000d80, + 0x02140000, 0x040007fa, 0x82000d80, 0x02100000, + 0x040007f7, 0x82000d80, 0x02100000, 0x040007f4, + 0x82000d80, 0x01000000, 0x04020158, 0x59cc0006, + 0x82000500, 0x0000ffff, 0x04020154, 0x42027000, + 0x00000016, 0x0401f7ec, 0x82040580, 0x00000022, + 0x0402014e, 0x59a80806, 0x8c040d14, 0x04000011, + 0x0401f967, 0x0402000f, 0x0401f97d, 0x0400000d, + 0x42027000, 0x0000004c, 0x59cc0001, 0x82000500, + 0x00ffffff, 0x0201f800, 0x00105eec, 0x0400012a, + 0x42028800, 0x0000ffff, 0x417a6800, 0x0401f126, + 0x59cc0006, 0x82000500, 0xffff0000, 0x82000d80, + 0x03000000, 0x04020021, 0x59a80026, 0x8c000508, + 0x04000017, 0x8400054c, 0x48035026, 0x59cc0800, + 0x82040d00, 0x00ffffff, 0x48075010, 0x497b8830, + 0x84040d70, 0x48078832, 0x59c40802, 0x84040d4c, + 0x48078802, 0x59cc0007, 0x82000500, 0x0000ffff, + 0x48038893, 0x4803501e, 0x42000800, 0x00000003, + 0x59a81010, 0x0201f800, 0x00106c78, 0x59cc0006, + 0x82000500, 0x0000ffff, 0x04020118, 0x42027000, + 0x00000017, 0x0401f0d9, 0x82000d80, 0x04000000, + 0x04020011, 0x59cc0006, 0x82000500, 0x0000ffff, + 0x0402010e, 0x0201f800, 0x0010513b, 0x04000004, + 0x42027000, 0x0000001d, 0x0401f0cc, 0x59a80026, + 0x84000548, 0x48035026, 0x42027000, 0x00000030, + 0x0401f0c6, 0x82000d80, 0x05000000, 0x04020008, + 0x59cc0006, 0x82000500, 0x0000ffff, 0x040200fb, + 0x42027000, 0x00000018, 0x0401f0bc, 0x82000d80, + 0x20100000, 0x04020004, 0x42027000, 0x00000019, + 0x0401f0b6, 0x82000d80, 0x21100000, 0x04020004, + 0x42027000, 0x0000001a, 0x0401f0b0, 0x82000d80, + 0x52000000, 0x04020008, 0x59cc0006, 0x82000500, + 0x0000ffff, 0x040200e5, 0x42027000, 0x0000001b, + 0x0401f0a6, 0x82000d80, 0x50000000, 0x04020008, + 0x59cc0006, 0x82000500, 0x0000ffff, 0x040200db, + 0x42027000, 0x0000001c, 0x0401f09c, 0x82000d80, + 0x13000000, 0x04020004, 0x42027000, 0x00000034, + 0x0401f096, 0x82000d80, 0x12000000, 0x04020008, + 0x59cc0006, 0x82000500, 0x0000ffff, 0x040200cb, + 0x42027000, 0x00000024, 0x0401f08c, 0x82000d00, + 0xff000000, 0x82040d80, 0x24000000, 0x04020004, + 0x42027000, 0x0000002d, 0x0401f084, 0x82000d00, + 0xff000000, 0x82040d80, 0x53000000, 0x04020004, + 0x42027000, 0x0000002a, 0x0401f07c, 0x82000d80, + 0x0f000000, 0x04020004, 0x42027000, 0x00000020, + 0x0401f076, 0x82000d80, 0x61040000, 0x04020036, + 0x83cc1400, 0x00000006, 0x80080800, 0x50080000, + 0x82000500, 0x0000ffff, 0x82000480, 0x00000004, + 0x4c580000, 0x8000b104, 0x8058b1c0, 0x04000026, + 0x4c100000, 0x50041800, 0x820c1500, 0x03000000, + 0x80081130, 0x42000000, 0x0010b817, 0x82082580, + 0x00000000, 0x04020004, 0x42000000, 0x0010b814, + 0x0401f00c, 0x82082580, 0x00000001, 0x04020004, + 0x42000000, 0x0010b815, 0x0401f006, 0x82082580, + 0x00000002, 0x04020003, 0x42000000, 0x0010b816, + 0x0201f800, 0x0010aa47, 0x42001000, 0x00008015, + 0x820c2500, 0x0000ffff, 0x800c1920, 0x0201f800, + 0x00103a3e, 0x5c002000, 0x80040800, 0x8058b040, + 0x040207da, 0x5c00b000, 0x42027000, 0x00000023, + 0x0401f03e, 0x82000d80, 0x60000000, 0x04020004, + 0x42027000, 0x0000003f, 0x0401f038, 0x82000d80, + 0x54000000, 0x04020006, 0x0401fb12, 0x0402006f, + 0x42027000, 0x00000046, 0x0401f030, 0x82000d80, + 0x55000000, 0x04020009, 0x0401fb32, 0x04020004, + 0x42027000, 0x00000041, 0x0401f028, 0x42027000, + 0x00000042, 0x0401f025, 0x82000d80, 0x78000000, + 0x04020004, 0x42027000, 0x00000045, 0x0401f01f, + 0x82000d80, 0x10000000, 0x04020004, 0x42027000, + 0x0000004e, 0x0401f019, 0x82000d80, 0x63000000, + 0x04020004, 0x42027000, 0x0000004a, 0x0401f013, + 0x82000d00, 0xff000000, 0x82040d80, 0x56000000, + 0x04020004, 0x42027000, 0x0000004f, 0x0401f00b, + 0x82000d00, 0xff000000, 0x82040d80, 0x57000000, + 0x04020004, 0x42027000, 0x00000050, 0x0401f003, + 0x42027000, 0x0000001d, 0x59cc3800, 0x821c3d00, + 0x00ffffff, 0x821c0580, 0x00fffffe, 0x59cc0001, + 0x04020005, 0x40003000, 0x42028800, 0x000007fe, + 0x0401f003, 0x0401f8d1, 0x04020030, 0x0201f800, + 0x001045a6, 0x0402002d, 0x83380580, 0x00000046, + 0x04020004, 0x59a80010, 0x80180580, 0x04000027, + 0x59340200, 0x8c000514, 0x0400000f, 0x83380580, + 0x00000030, 0x0400000c, 0x83380580, 0x0000003f, + 0x04000009, 0x83380580, 0x00000034, 0x04000006, + 0x83380580, 0x00000024, 0x04000003, 0x42027000, + 0x0000004c, 0x0201f800, 0x0002075a, 0x04000018, + 0x49366009, 0x4a026406, 0x00000004, 0x59cc0c04, + 0x48066202, 0x83380580, 0x0000004c, 0x04020009, + 0x4a026406, 0x00000011, 0x813669c0, 0x04020005, + 0x59cc0001, 0x82000500, 0x00ffffff, 0x4802601e, + 0x0201f000, 0x000207a1, 0x59880052, 0x4803c857, + 0x80000000, 0x48031052, 0x1c01f000, 0x42001000, + 0x00008049, 0x59cc1806, 0x800c1930, 0x0201f800, + 0x00103a3e, 0x0201f800, 0x00107942, 0x040007f3, + 0x49366009, 0x4a026406, 0x00000004, 0x59cc0c04, + 0x48066202, 0x4a026403, 0x00000009, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00002900, 0x4a026203, + 0x00000001, 0x0201f000, 0x0010672b, 0x59a80026, + 0x4803c857, 0x8c000508, 0x04000010, 0x59cc0006, + 0x82000500, 0xff000000, 0x82000d80, 0x03000000, + 0x0400000c, 0x82000d80, 0x20000000, 0x04000009, + 0x82000d80, 0x05000000, 0x04000006, 0x82000d80, + 0x21000000, 0x04000003, 0x80000580, 0x1c01f000, + 0x82000540, 0x00000001, 0x0401f7fd, 0x59cc2006, + 0x82102500, 0xff000000, 0x9c1021c0, 0x0401f807, + 0x820c1c00, 0x0010b4e3, 0x500c1800, 0x800c0500, + 0x4803c857, 0x1c01f000, 0x40100800, 0x41781800, + 0x82040480, 0x00000020, 0x04001004, 0x800c1800, + 0x40000800, 0x0401f7fb, 0x82040500, 0x0000000f, + 0x82000400, 0x0010ab38, 0x50000000, 0x8c040d08, + 0x04000002, 0x900001c0, 0x1c01f000, 0x4803c856, + 0x0401fac3, 0x0402000a, 0x0201f800, 0x0010210a, + 0x04020007, 0x59cc0002, 0x82000500, 0xff000000, + 0x82000d80, 0x08000000, 0x04000802, 0x1c01f000, + 0x4803c856, 0x59cc0400, 0x82000d00, 0x0000ff00, + 0x840409c0, 0x82040580, 0x00000033, 0x0402001f, + 0x0401f976, 0x04000038, 0x59cc0a04, 0x48066202, + 0x59cc0006, 0x4803c857, 0x82000500, 0xffff0000, + 0x82000d80, 0x02000000, 0x04020009, 0x59cc0006, + 0x82000500, 0x0000ffff, 0x0402002b, 0x42027000, + 0x00000015, 0x0201f000, 0x000207a1, 0x82000d80, + 0x01000000, 0x04020024, 0x59cc0006, 0x82000500, + 0x0000ffff, 0x04020020, 0x42027000, 0x00000016, + 0x0201f000, 0x000207a1, 0x82040580, 0x00000032, + 0x04020019, 0x59cc0006, 0x82000500, 0xffff0000, + 0x82000d80, 0x14000000, 0x04020013, 0x42027000, + 0x00000038, 0x59cc0001, 0x0401f810, 0x0402000e, + 0x0201f800, 0x001045a6, 0x0402000b, 0x0201f800, + 0x0002075a, 0x04000008, 0x49366009, 0x4a026406, + 0x00000004, 0x59cc0c04, 0x48066202, 0x0201f000, + 0x000207a1, 0x1c01f000, 0x4803c857, 0x4c580000, + 0x4c100000, 0x4c380000, 0x4c340000, 0x82003500, + 0x00ffffff, 0x82181500, 0x00ff0000, 0x82081580, + 0x00ff0000, 0x04020016, 0x82181480, 0x00fffffc, + 0x04001013, 0x82181580, 0x00fffffd, 0x04020004, + 0x42028800, 0x000007fd, 0x0401f040, 0x82181580, + 0x00fffffe, 0x04020004, 0x42028800, 0x000007fe, + 0x0401f03a, 0x82181580, 0x00fffffc, 0x04020004, + 0x42028800, 0x000007fc, 0x0401f034, 0x41781000, + 0x42002000, 0x00000000, 0x4200b000, 0x000007f0, + 0x41ac7000, 0x50380000, 0x80006d40, 0x04020005, + 0x800811c0, 0x0402001e, 0x8410155e, 0x0401f01c, + 0x58340212, 0x82000500, 0x0000ff00, 0x04000011, + 0x59a84010, 0x82204500, 0x00ffff00, 0x82180500, + 0x00ffff00, 0x04000002, 0x80200580, 0x58340002, + 0x0402000f, 0x82000500, 0x000000ff, 0x82184500, + 0x000000ff, 0x80204580, 0x04020009, 0x0401f006, + 0x58340002, 0x82000500, 0x00ffffff, 0x80184580, + 0x04020003, 0x40128800, 0x0401f00c, 0x80102000, + 0x80387000, 0x8058b040, 0x040207db, 0x800811c0, + 0x04020005, 0x481bc857, 0x82000540, 0x00000001, + 0x0401f003, 0x840a8d1e, 0x80000580, 0x5c006800, + 0x5c007000, 0x5c002000, 0x5c00b000, 0x1c01f000, + 0x59a80026, 0x8c00050e, 0x04000003, 0x8c000502, + 0x04000006, 0x59cc0c00, 0x80040910, 0x82040500, + 0x0000000f, 0x0c01f002, 0x1c01f000, 0x00105d0f, + 0x00105d0f, 0x00105d0f, 0x00105de5, 0x00105d0f, + 0x00105d11, 0x00105d29, 0x00105d2c, 0x00105d0f, + 0x00105d0f, 0x00105d0f, 0x00105d0f, 0x00105d0f, + 0x00105d0f, 0x00105d0f, 0x00105d0f, 0x4803c856, + 0x1c01f000, 0x0401f8c5, 0x04000014, 0x82140500, + 0x000003ff, 0x800000c4, 0x82000480, 0x00000008, + 0x0400100e, 0x59cc0001, 0x59326809, 0x59340802, + 0x80040580, 0x82000500, 0x00ffffff, 0x04020007, + 0x59cc0a04, 0x48066202, 0x42027000, 0x00000046, + 0x0201f000, 0x000207a1, 0x59cc0004, 0x4803c857, + 0x1c01f000, 0x59cc0004, 0x4803c857, 0x1c01f000, + 0x0401f8aa, 0x04000016, 0x82140500, 0x000003ff, + 0x800000c4, 0x82000480, 0x0000000c, 0x04001010, + 0x59cc0001, 0x82000500, 0x00ffffff, 0x59326809, + 0x59340802, 0x82040d00, 0x00ffffff, 0x80040580, + 0x04020007, 0x59cc0a04, 0x48066202, 0x42027000, + 0x00000045, 0x0201f000, 0x000207a1, 0x59cc0004, + 0x4803c857, 0x1c01f000, 0x4817c857, 0x0401f9c8, + 0x04020011, 0x0201f800, 0x0010210a, 0x0402000e, + 0x59cc0002, 0x82000500, 0xff000000, 0x82000580, + 0x00000000, 0x04020008, 0x82040500, 0x0000000f, + 0x82000c80, 0x00000006, 0x04021003, 0x4803c857, + 0x0c01f002, 0x1c01f000, 0x00105d60, 0x00105d64, + 0x00105d60, 0x00105d60, 0x00105db2, 0x00105dc3, + 0x4803c857, 0x59cc0004, 0x4803c857, 0x1c01f000, + 0x59cc0004, 0x4803c857, 0x59a80016, 0x800001c0, + 0x040207f8, 0x59cc0802, 0x8c040d2e, 0x0402001d, + 0x0201f800, 0x00107942, 0x02000800, 0x001005d8, + 0x59cc0001, 0x4803c857, 0x0401ff28, 0x0402000d, + 0x0201f800, 0x00020245, 0x0402000a, 0x4a026406, + 0x00000005, 0x49366009, 0x59cc0c04, 0x48066202, + 0x42027000, 0x00000088, 0x0201f000, 0x000207a1, + 0x42028800, 0x0000ffff, 0x417a6800, 0x59cc0001, + 0x82000500, 0x00ffffff, 0x4802601e, 0x0401f7f0, + 0x59cc0001, 0x4803c857, 0x0401ff10, 0x040207d5, + 0x0201f800, 0x001045a6, 0x040207d2, 0x59cc0005, + 0x8c000500, 0x04020004, 0x59340200, 0x8c00050e, + 0x040207cc, 0x0201f800, 0x001049f3, 0x0402000f, + 0x0401f83e, 0x040007c7, 0x0201f800, 0x0002075a, + 0x040007c4, 0x49366009, 0x4a026406, 0x00000002, + 0x59cc0c04, 0x48066202, 0x42027000, 0x00000088, + 0x0201f000, 0x000207a1, 0x0201f800, 0x0002075a, + 0x040007b8, 0x49366009, 0x4a026406, 0x00000004, + 0x59cc0c04, 0x48066202, 0x42027000, 0x00000001, + 0x0201f000, 0x000207a1, 0x59cc0004, 0x4803c857, + 0x59cc0802, 0x8c040d2e, 0x0400000b, 0x0401f81f, + 0x04000009, 0x0401f960, 0x04020007, 0x59cc0a04, + 0x48066202, 0x42027000, 0x00000089, 0x0201f000, + 0x000207a1, 0x4933c857, 0x1c01f000, 0x59cc0004, + 0x4803c857, 0x59cc0802, 0x8c040d2e, 0x0400000b, + 0x0401f80e, 0x04000009, 0x0401f94f, 0x04020007, + 0x59cc0a04, 0x48066202, 0x42027000, 0x0000008a, + 0x0201f000, 0x000207a1, 0x4933c857, 0x1c01f000, + 0x59cc0a04, 0x0401f002, 0x59cc0c04, 0x59a8000e, + 0x59a81067, 0x80080400, 0x80040480, 0x04021008, + 0x40040000, 0x800000c4, 0x800408ca, 0x80040c00, + 0x82066400, 0x0010d1c0, 0x1c01f000, 0x80000580, + 0x0401f7fe, 0x59cc0802, 0x8c040d2e, 0x04020010, + 0x0401ffec, 0x0400000e, 0x59cc0001, 0x82000500, + 0x00ffffff, 0x59326809, 0x59340802, 0x82040d00, + 0x00ffffff, 0x80040580, 0x04020005, 0x42027000, + 0x00000051, 0x0201f000, 0x000207a1, 0x59cc0004, + 0x4803c857, 0x1c01f000, 0x4803c856, 0x42003000, + 0x00000105, 0x0401f001, 0x4803c856, 0x4c3c0000, + 0x41cc7800, 0x0401f803, 0x5c007800, 0x1c01f000, + 0x4803c856, 0x4c580000, 0x583c0400, 0x82000500, + 0x0000f000, 0x82000580, 0x0000c000, 0x04000024, + 0x0201f800, 0x0002075a, 0x04000021, 0x4c180000, + 0x583c0001, 0x0401fe89, 0x0402001f, 0x0201f800, + 0x001045a6, 0x0402001c, 0x49366009, 0x0201f800, + 0x001007e4, 0x04000018, 0x492e6017, 0x497a5800, + 0x497a5a04, 0x48125c04, 0x832cac00, 0x00000005, + 0x4200b000, 0x00000007, 0x403ca000, 0x0201f800, + 0x0010ab17, 0x5c003000, 0x481a641a, 0x4a026403, + 0x0000003e, 0x4a026406, 0x00000001, 0x4a026203, + 0x00000001, 0x0201f800, 0x0010672b, 0x5c00b000, + 0x1c01f000, 0x0201f800, 0x0002077d, 0x5c003000, + 0x0401f7fb, 0x4803c856, 0x59cc0400, 0x82000d00, + 0x0000ff00, 0x82040500, 0x0000f000, 0x840409c0, + 0x82000580, 0x00002000, 0x04020049, 0x82040580, + 0x00000022, 0x0402003a, 0x59c400a4, 0x82000500, + 0x0000000f, 0x82000c80, 0x00000007, 0x04001004, + 0x82000480, 0x0000000c, 0x0400103f, 0x59cc0006, + 0x82000500, 0xffff0000, 0x82000d80, 0x04000000, + 0x04000039, 0x82000d80, 0x60000000, 0x04000036, + 0x82000d80, 0x54000000, 0x04000033, 0x82000d80, + 0x03000000, 0x04020015, 0x59a80826, 0x8c040d02, + 0x0402002d, 0x8c040d08, 0x0402002b, 0x0201f800, + 0x001048ec, 0x0400002b, 0x59a8001d, 0x800000d0, + 0x59a80810, 0x82040d00, 0x000000ff, 0x80040540, + 0x59cc0800, 0x82040d00, 0x00ffffff, 0x80040580, + 0x0402001b, 0x0401f01c, 0x59c40802, 0x8c040d0c, + 0x04020017, 0x82000d80, 0x52000000, 0x040007ec, + 0x82000d80, 0x05000000, 0x040007e9, 0x82000d80, + 0x50000000, 0x040007e6, 0x0401f00d, 0x82040580, + 0x00000023, 0x0402000a, 0x0401ff58, 0x04000008, + 0x59300c03, 0x82040580, 0x00000002, 0x04000006, + 0x82040580, 0x00000051, 0x04000003, 0x80000580, + 0x0401f003, 0x82000540, 0x00000001, 0x1c01f000, + 0x59cc0006, 0x82000500, 0xffff0000, 0x82000d80, + 0x03000000, 0x04000004, 0x82000d80, 0x52000000, + 0x040207f3, 0x59a80026, 0x82000500, 0x00000009, + 0x82000580, 0x00000008, 0x040007ef, 0x0401f7ec, + 0x4803c856, 0x4c5c0000, 0x4c580000, 0x59a80016, + 0x82000580, 0x0000004c, 0x0402001f, 0x59ccb807, + 0x9c5cb9c0, 0x825cbd00, 0x00000007, 0x8c5cbd00, + 0x0400000a, 0x4200b000, 0x00000002, 0x83a81c00, + 0x00000002, 0x83cc1400, 0x0000000d, 0x0201f800, + 0x0010855a, 0x04020010, 0x8c5cbd02, 0x0400000a, + 0x4200b000, 0x00000002, 0x83a81c00, 0x00000000, + 0x83cc1400, 0x0000000f, 0x0201f800, 0x0010855a, + 0x04020005, 0x8c5cbd04, 0x04000003, 0x82000540, + 0x00000001, 0x5c00b000, 0x5c00b800, 0x1c01f000, + 0x4803c856, 0x4c5c0000, 0x4c580000, 0x59a80016, + 0x82000580, 0x0000004c, 0x0402001f, 0x59ccb807, + 0x9c5cb9c0, 0x825cbd00, 0x00000007, 0x8c5cbd00, + 0x0400000a, 0x4200b000, 0x00000002, 0x83a81c00, + 0x00000002, 0x83cc1400, 0x00000009, 0x0201f800, + 0x0010855a, 0x04020010, 0x8c5cbd02, 0x0400000a, + 0x4200b000, 0x00000002, 0x83a81c00, 0x00000000, + 0x83cc1400, 0x0000000b, 0x0201f800, 0x0010855a, + 0x04020005, 0x8c5cbd04, 0x04000003, 0x82000540, + 0x00000001, 0x5c00b000, 0x5c00b800, 0x1c01f000, + 0x4803c857, 0x4c580000, 0x40003000, 0x42002000, + 0x000007f0, 0x4200b000, 0x00000010, 0x83ac7400, + 0x000007f0, 0x50380000, 0x80026d40, 0x04000006, + 0x59340002, 0x82000500, 0x00ffffff, 0x80180580, + 0x04000010, 0x80102000, 0x80387000, 0x8058b040, + 0x040207f5, 0x82100480, 0x00000800, 0x42002000, + 0x00000000, 0x4200b000, 0x000007f0, 0x41ac7000, + 0x040217ed, 0x82000540, 0x00000001, 0x0401f002, + 0x40128800, 0x5c00b000, 0x1c01f000, 0x59a80026, + 0x8c00050e, 0x04000004, 0x8c000502, 0x04000003, + 0x80000580, 0x1c01f000, 0x82000540, 0x00000001, + 0x0401f7fd, 0x59300c06, 0x82040580, 0x00000002, + 0x04000006, 0x82040580, 0x00000005, 0x04000003, + 0x82000540, 0x00000001, 0x1c01f000, 0x59c80000, + 0x84000558, 0x84000512, 0x48039000, 0x1c01f000, + 0x4a03281a, 0x000003e8, 0x4a032802, 0x0010d1c0, + 0x4a032800, 0x00000000, 0x4a032808, 0x00107049, + 0x42000000, 0x00000005, 0x83947c00, 0x00000009, + 0x49787801, 0x4a007802, 0x00106fff, 0x823c7c00, + 0x00000003, 0x80000040, 0x040207fa, 0x4a032819, + 0xffff0000, 0x4201d000, 0x00000064, 0x0401f96e, + 0x4201d000, 0x000186a0, 0x0401f184, 0x00000000, + 0x00000003, 0x00000006, 0x00000009, 0x0000000c, + 0x4d300000, 0x4d2c0000, 0x4d340000, 0x4d400000, + 0x4cfc0000, 0x4d380000, 0x4d3c0000, 0x4d440000, + 0x4d4c0000, 0x4d480000, 0x4c5c0000, 0x4c600000, + 0x4c640000, 0x4cc80000, 0x4ccc0000, 0x0201f800, + 0x0002057b, 0x5c019800, 0x5c019000, 0x5c00c800, + 0x5c00c000, 0x5c00b800, 0x5c029000, 0x5c029800, + 0x5c028800, 0x5c027800, 0x5c027000, 0x5c01f800, + 0x5c028000, 0x5c026800, 0x5c025800, 0x5c026000, + 0x1c01f000, 0x59940004, 0x80000540, 0x0402000a, + 0x59940025, 0x80040400, 0x02001800, 0x001005d8, + 0x48032804, 0x480b2805, 0x4a032803, 0x0000000a, + 0x80000580, 0x1c01f000, 0x5994001f, 0x80000540, + 0x0402000a, 0x59940025, 0x80040400, 0x02001800, + 0x001005d8, 0x4803281f, 0x480b2820, 0x4a03281e, + 0x00000001, 0x80000580, 0x1c01f000, 0x59940022, + 0x80000540, 0x0402000a, 0x59940025, 0x80040400, + 0x02001800, 0x001005d8, 0x48032822, 0x480b2823, + 0x4a032821, 0x0000000a, 0x80000580, 0x1c01f000, + 0x4c000000, 0x59940005, 0x4803c857, 0x480bc857, + 0x80080580, 0x04020003, 0x497b2804, 0x497b2805, + 0x5c000000, 0x1c01f000, 0x4c000000, 0x59940020, + 0x4803c857, 0x480bc857, 0x80080580, 0x04020003, + 0x497b281f, 0x497b2820, 0x5c000000, 0x1c01f000, + 0x4c000000, 0x59940023, 0x4803c857, 0x480bc857, + 0x80080580, 0x04020003, 0x497b2822, 0x497b2823, + 0x5c000000, 0x1c01f000, 0x4937c857, 0x48ebc857, + 0x59340203, 0x80e80480, 0x04001002, 0x48ea6a03, + 0x1c01f000, 0x5c03e000, 0x1c01f000, 0x4d440000, + 0x42007800, 0x00000010, 0x59968801, 0x0201f800, + 0x00020245, 0x04020012, 0x59341a03, 0x800c1840, + 0x0400100f, 0x59940027, 0x800c0480, 0x04000003, + 0x48026a03, 0x0402100a, 0x5934000f, 0x497a6a03, + 0x80000540, 0x04000006, 0x4c3c0000, 0x5934140b, + 0x0201f800, 0x00020253, 0x5c007800, 0x81468800, + 0x83440480, 0x00000800, 0x04021007, 0x803c7840, + 0x040207e7, 0x49472801, 0x5c028800, 0x5c03e000, + 0x1c01f000, 0x4a032800, 0x00000002, 0x497b2801, + 0x0401f7fa, 0x42007800, 0x00000010, 0x59966002, + 0x59300205, 0x80000d40, 0x04000006, 0x59940027, + 0x80040480, 0x48026205, 0x0400102d, 0x0400002c, + 0x59300206, 0x80000d40, 0x04000014, 0x59b800e4, + 0x8c000524, 0x04020011, 0x4a0370e4, 0x00030000, + 0x40000000, 0x59b800e4, 0x8c000524, 0x04000004, + 0x4a0370e4, 0x00020000, 0x0401f008, 0x59940027, + 0x80040480, 0x48026206, 0x4a0370e4, 0x00020000, + 0x0400101c, 0x0400001b, 0x83326400, 0x00000024, + 0x49332802, 0x41540000, 0x81300480, 0x04021005, + 0x803c7840, 0x040207db, 0x5c03e000, 0x1c01f000, + 0x59940026, 0x48032827, 0x4a032802, 0x0010d1c0, + 0x497b2826, 0x80000540, 0x0400000f, 0x4a032800, + 0x00000001, 0x5c03e000, 0x1c01f000, 0x4c3c0000, + 0x0201f800, 0x001091db, 0x5c007800, 0x0401f7d1, + 0x4c3c0000, 0x0201f800, 0x00108d5d, 0x5c007800, + 0x0401f7e2, 0x4a032800, 0x00000000, 0x5c03e000, + 0x1c01f000, 0x59a8086b, 0x8c040d30, 0x04020029, + 0x8c040d32, 0x0400000f, 0x59a80069, 0x81640480, + 0x04001019, 0x59a8000b, 0x81500580, 0x04000005, + 0x59a8006a, 0x59a81066, 0x80080580, 0x04020012, + 0x900411c0, 0x82081500, 0x00007000, 0x0401f012, + 0x82040500, 0x0000001f, 0x04000016, 0x80040840, + 0x82040500, 0x0000001f, 0x04000003, 0x4807506b, + 0x0401f010, 0x900401c0, 0x82000500, 0x0000001f, + 0x80040d40, 0x900401c0, 0x80040580, 0x82001500, + 0x00007000, 0x82040500, 0xffff8fff, 0x80080540, + 0x4803506b, 0x80081114, 0x0201f800, 0x001006e2, + 0x1c01f000, 0x4a032807, 0x000007d0, 0x4a032806, + 0x0000000a, 0x1c01f000, 0x42000800, 0x000007d0, + 0x83180480, 0x00000005, 0x02021800, 0x001005d8, + 0x83947c00, 0x00000009, 0x83180400, 0x00105f43, + 0x50000000, 0x803c7c00, 0x48047801, 0x4a007800, + 0x0000000a, 0x1c01f000, 0x83180480, 0x00000005, + 0x02021800, 0x001005d8, 0x83947c00, 0x00000009, + 0x83180400, 0x00105f43, 0x50000000, 0x803c7c00, + 0x49787801, 0x1c01f000, 0x4807c857, 0x480bc857, + 0x59940025, 0x80040400, 0x02001800, 0x001005d8, + 0x48032804, 0x480b2805, 0x4a032803, 0x0000000a, + 0x1c01f000, 0x4807c857, 0x480bc857, 0x59940025, + 0x80040400, 0x02001800, 0x001005d8, 0x4803281c, + 0x480b281d, 0x4a03281b, 0x0000000a, 0x1c01f000, + 0x4c000000, 0x5994001d, 0x4803c857, 0x480bc857, + 0x80080580, 0x04020003, 0x4803281c, 0x4803281d, + 0x5c000000, 0x1c01f000, 0x80e9d1c0, 0x0400000e, + 0x0401f836, 0x04025000, 0x4203e000, 0x80000000, + 0x40e81000, 0x41780800, 0x42000000, 0x00000064, + 0x0201f800, 0x001066a0, 0x59940024, 0x80080400, + 0x48032824, 0x1c01f000, 0x42001000, 0x00105065, + 0x0401fef0, 0x42001000, 0x00105058, 0x0401ffe1, + 0x42001000, 0x00104148, 0x0401feea, 0x42001000, + 0x001041bc, 0x0401fee7, 0x42001000, 0x001041f3, + 0x0401f6f8, 0x4203e000, 0x70000000, 0x4203e000, + 0xb0300000, 0x41fc0000, 0x40ebf800, 0x80e80480, + 0x04001011, 0x04000004, 0x82000480, 0x00000003, + 0x0402100d, 0x42000000, 0x0000000f, 0x04004004, + 0x80000040, 0x040207fe, 0x0401f007, 0x4203e000, + 0x70000000, 0x42000000, 0x0010b87e, 0x0201f800, + 0x0010aa47, 0x1c01f000, 0x4203e000, 0x80000000, + 0x4203e000, 0xb0400000, 0x41fc0000, 0x40ebf800, + 0x80e80480, 0x04001011, 0x04000004, 0x82000480, + 0x00000003, 0x0402100d, 0x42000000, 0x0000000f, + 0x04005004, 0x80000040, 0x040207fe, 0x0401f007, + 0x4203e000, 0x80000000, 0x42000000, 0x0010b87f, + 0x0201f800, 0x0010aa47, 0x1c01f000, 0x59a8000e, + 0x82000480, 0x00000100, 0x599c0a02, 0x800409c0, + 0x04020002, 0x80040800, 0x80041480, 0x04001002, + 0x40000800, 0x48075067, 0x59a8100e, 0x40040000, + 0x800acc80, 0x4967500e, 0x49675069, 0x59aaa80b, + 0x41640800, 0x42001000, 0x00000024, 0x0201f800, + 0x00106681, 0x8206a400, 0x0010d1c0, 0x49535065, + 0x4152b000, 0x42006000, 0x0010be65, 0x4a006004, + 0x0000012c, 0x4a006005, 0xda10da10, 0x4a006008, + 0x00000011, 0x4a006009, 0x0010be65, 0x4a00600a, + 0x001010b8, 0x599c0014, 0x48006011, 0x599c0015, + 0x48006012, 0x42006000, 0x0010be41, 0x4a006203, + 0x00000008, 0x4a006406, 0x00000006, 0x4a006002, + 0xffff0000, 0x4a006008, 0x0010be65, 0x4a006014, + 0x0010be65, 0x599c0014, 0x48006015, 0x599c0015, + 0x48006016, 0x599c0413, 0x48006017, 0x49506018, + 0x49546019, 0x59a80067, 0x4800601a, 0x4a00601b, + 0x0010b465, 0x4a00601c, 0x0010b466, 0x4a00601d, + 0x0010b46a, 0x42000000, 0xb0000000, 0x42000800, + 0x0010be41, 0x0201f800, 0x00100b68, 0x1c01f000, + 0x82000d00, 0x000000c0, 0x04000004, 0x82040d80, + 0x000000c0, 0x04020055, 0x82000d00, 0x00002020, + 0x59300414, 0x84000512, 0x82040d80, 0x00002020, + 0x0400000b, 0x8c000514, 0x0402000f, 0x48026414, + 0x813e79c0, 0x02020000, 0x000206d0, 0x42027000, + 0x00000043, 0x0201f000, 0x000207a1, 0x59326809, + 0x59340a00, 0x8c040d0a, 0x040007f3, 0x84000552, + 0x0401f7f1, 0x84000514, 0x592c080d, 0x48066015, + 0x0401f7ef, 0x59326809, 0x59340a00, 0x8c040d0a, + 0x02000000, 0x000206e3, 0x59300c14, 0x84040d52, + 0x48066414, 0x0201f000, 0x000206e3, 0x0201f800, + 0x00020086, 0x813e79c0, 0x02020000, 0x000206d0, + 0x0201f000, 0x000206f1, 0x8c00051e, 0x02000000, + 0x000206fd, 0x82000d00, 0x00002020, 0x82040d80, + 0x00002020, 0x04000014, 0x82000500, 0x000000c0, + 0x82000d80, 0x00000080, 0x04000008, 0x813e79c0, + 0x02020000, 0x000206d0, 0x42027000, 0x00000041, + 0x0201f000, 0x000207a1, 0x813e79c0, 0x02020000, + 0x000206d0, 0x42027000, 0x00000043, 0x0201f000, + 0x000207a1, 0x59326809, 0x59340a00, 0x8c040d0a, + 0x040007ea, 0x59300c14, 0x84040d52, 0x48066414, + 0x0401f7e6, 0x492fc857, 0x42000800, 0x00000006, + 0x0201f000, 0x000206f8, 0x492fc857, 0x42000800, + 0x00000004, 0x0201f000, 0x000206f8, 0x4807c856, + 0x59a80068, 0x800409c0, 0x04000003, 0x80080540, + 0x0401f002, 0x80080500, 0x48035068, 0x1c01f000, + 0x4a030800, 0x00000000, 0x4a030802, 0x00000001, + 0x497b0803, 0x497b0804, 0x1c01f000, 0x59840002, + 0x8c000500, 0x04000004, 0x84000500, 0x4a030800, + 0x00000001, 0x84000544, 0x84000506, 0x48030802, + 0x82000d00, 0x0fffffff, 0x42000000, 0x90000000, + 0x0201f800, 0x00100b94, 0x59a80069, 0x82000480, + 0x00000007, 0x48035069, 0x80000580, 0x42000800, + 0x0010b519, 0x48000800, 0x48000801, 0x1c01f000, + 0x59a80069, 0x82000480, 0x00000007, 0x48035069, + 0x1c01f000, 0x83640480, 0x00000008, 0x0400101b, + 0x58c80a03, 0x80000580, 0x82000400, 0x00000008, + 0x80040840, 0x040207fd, 0x815c0480, 0x04001013, + 0x4200b000, 0x00000007, 0x0201f800, 0x0002075a, + 0x4a026203, 0x00000004, 0x4a026406, 0x00000009, + 0x4a026203, 0x00000004, 0x4a026007, 0x00000101, + 0x0401f809, 0x0401f880, 0x8058b040, 0x040207f3, + 0x80000580, 0x1c01f000, 0x82000540, 0x00000001, + 0x0401f7fd, 0x0201f800, 0x001007e4, 0x492e6008, + 0x58c80a03, 0x4a025a04, 0x0000002c, 0x497a5800, + 0x497a5801, 0x497a5c04, 0x497a5c06, 0x497a5805, + 0x4a025a08, 0x00000005, 0x4a025a07, 0x00000002, + 0x58c80201, 0x48025c04, 0x58c80202, 0x48025c07, + 0x58c80204, 0x48025c08, 0x4a02580d, 0x0000ffff, + 0x80040840, 0x0400000c, 0x412c2000, 0x0201f800, + 0x001007e4, 0x4a025a04, 0x0000000a, 0x497a5c04, + 0x48125800, 0x492c2001, 0x412c2000, 0x80040840, + 0x040207f7, 0x1c01f000, 0x4d7c0000, 0x4202f800, + 0x00000010, 0x4df00000, 0x4203e000, 0x50000000, + 0x59847803, 0x803c79c0, 0x0400001e, 0x4c5c0000, + 0x583cb808, 0x585c3408, 0x801831c0, 0x0400000b, + 0x0401f84a, 0x04000016, 0x42001000, 0x0010b519, + 0x0401f87f, 0x04000012, 0x0201f800, 0x001007d3, + 0x0400000f, 0x492cb805, 0x585c0005, 0x80000540, + 0x02000800, 0x001005d8, 0x0401f830, 0x585c5408, + 0x0401f80b, 0x5c00b800, 0x5c03e000, 0x817ef840, + 0x040207e1, 0x5c02f800, 0x1c01f000, 0x5c00b800, + 0x5c03e000, 0x5c02f800, 0x1c01f000, 0x4803c856, + 0x405c6000, 0x802851c0, 0x04000018, 0x585c0204, + 0x82000d00, 0x0000000f, 0x82040c00, 0x001010bd, + 0x50044000, 0x4cf00000, 0x4d000000, 0x4d040000, + 0x4021e000, 0x40320800, 0x59860004, 0x4c280000, + 0x0401f934, 0x5c005000, 0x40f04000, 0x41046000, + 0x0201f800, 0x0010109b, 0x040207f6, 0x5c020800, + 0x5c020000, 0x5c01e000, 0x58c80204, 0x4800bc08, + 0x0201f800, 0x00020086, 0x4a026007, 0x00000101, + 0x497a6009, 0x0401f055, 0x4803c856, 0x59840003, + 0x80026540, 0x04000003, 0x59300000, 0x48030803, + 0x1c01f000, 0x4803c856, 0x59840003, 0x48026000, + 0x49330803, 0x1c01f000, 0x58cc0805, 0x40180000, + 0x80040480, 0x0400100d, 0x82cc0580, 0x0010b50e, + 0x02020800, 0x001005d8, 0x58c80205, 0x80040480, + 0x0400101d, 0x82000540, 0x00000001, 0x1c01f000, + 0x80003580, 0x0401f7fe, 0x82cc0580, 0x0010b50e, + 0x02020800, 0x001005d8, 0x58c80400, 0x8c000504, + 0x040007f8, 0x58c8040b, 0x8c00051e, 0x040007f5, + 0x8c000500, 0x040207f3, 0x84000540, 0x4801940b, + 0x42000000, 0x0010b839, 0x0201f800, 0x0010aa47, + 0x42001000, 0x00008026, 0x0201f800, 0x00103a3e, + 0x0401f7e8, 0x58c8040b, 0x8c00051e, 0x040007e2, + 0x8c000502, 0x040207e0, 0x84000542, 0x4801940b, + 0x42000000, 0x0010b838, 0x0201f800, 0x0010aa47, + 0x42001000, 0x00008025, 0x42001800, 0x00000000, + 0x0201f800, 0x00103a3e, 0x0401f7d3, 0x4803c856, + 0x58080000, 0x42001800, 0x00000007, 0x58080801, + 0x80040480, 0x04020004, 0x400c0000, 0x80000540, + 0x0401f005, 0x04001003, 0x800c0480, 0x0401f002, + 0x80000080, 0x1c01f000, 0x4803c856, 0x59300008, + 0x80000d40, 0x02000800, 0x001005d8, 0x58040005, + 0x80000540, 0x02000800, 0x001005d8, 0x59300007, + 0x82000500, 0x00000101, 0x82000580, 0x00000101, + 0x02020800, 0x001005d8, 0x42001000, 0x0010b519, + 0x58080801, 0x82040400, 0x0010b51b, 0x497a6414, + 0x4a026015, 0x0000ffff, 0x45300000, 0x80040800, + 0x82040480, 0x00000008, 0x04001002, 0x80000d80, + 0x48041001, 0x82040400, 0x0010b51b, 0x45780000, + 0x1c01f000, 0x4933c857, 0x59300808, 0x800409c0, + 0x02000800, 0x001005d8, 0x4d2c0000, 0x58065805, + 0x812e59c0, 0x02020800, 0x001007f4, 0x49780805, + 0x40065800, 0x0201f800, 0x001007fd, 0x5c025800, + 0x4d300000, 0x0201f800, 0x0002077d, 0x5c026000, + 0x1c01f000, 0x59300406, 0x82000580, 0x00000009, + 0x04020006, 0x59300007, 0x8c000510, 0x04000003, + 0x80000580, 0x1c01f000, 0x82000540, 0x00000001, + 0x1c01f000, 0x59840802, 0x8c040d04, 0x1c01f000, + 0x4803c856, 0x59840802, 0x84040d04, 0x84040d40, + 0x4a030800, 0x00000000, 0x48070802, 0x82040d00, + 0x0fffffff, 0x42000000, 0x90000000, 0x0201f000, + 0x00100b94, 0x4807c857, 0x4805980a, 0x49799801, + 0x49799803, 0x49799806, 0x49799807, 0x49799808, + 0x49799805, 0x49799809, 0x0401f8c9, 0x0400000a, + 0x0401f8eb, 0x04000008, 0x48359800, 0x48359802, + 0x48359806, 0x4a019804, 0x00000001, 0x4a019807, + 0x00000005, 0x1c01f000, 0x4807c857, 0x58cc1007, + 0x40040000, 0x80080480, 0x04021020, 0x4c040000, + 0x4c080000, 0x0401f8da, 0x5c001000, 0x5c000800, + 0x0400001c, 0x58cc0006, 0x80006540, 0x0402000b, + 0x48359800, 0x48359802, 0x48359806, 0x49799801, + 0x49799803, 0x49786801, 0x49786800, 0x49799804, + 0x49799807, 0x0401f005, 0x48306801, 0x48346000, + 0x48359806, 0x49786800, 0x58cc0004, 0x58cc1007, + 0x80000000, 0x82081400, 0x00000005, 0x48019804, + 0x48099807, 0x0401f7df, 0x80000580, 0x1c01f000, + 0x82000540, 0x00000001, 0x1c01f000, 0x480bc857, + 0x4c500000, 0x4c540000, 0x4c580000, 0x40083000, + 0x58cc0801, 0x82040480, 0x00000005, 0x02021800, + 0x001005d8, 0x82040400, 0x00106418, 0x50000000, + 0x58cca800, 0x8054ac00, 0x42001800, 0x00000005, + 0x40040000, 0x800c0480, 0x80082480, 0x04021002, + 0x40080000, 0x8000b0c2, 0x8058b400, 0x5450a800, + 0x8050a000, 0x8054a800, 0x8058b040, 0x040207fc, + 0x40001000, 0x58cc2805, 0x58cc0807, 0x58cc2001, + 0x80142c00, 0x80040c80, 0x80102400, 0x48159805, + 0x48059807, 0x48119801, 0x82100580, 0x00000005, + 0x0400000c, 0x48119801, 0x40080000, 0x80181480, + 0x40083000, 0x04000003, 0x040217d6, 0x80000580, + 0x5c00b000, 0x5c00a800, 0x5c00a000, 0x1c01f000, + 0x58cc0800, 0x800409c0, 0x02000800, 0x001005d8, + 0x58040800, 0x48059800, 0x41782000, 0x0401f7ee, + 0x0401f813, 0x50f00000, 0x81040400, 0x40001800, + 0x585c0204, 0x4803c857, 0x82000580, 0x0000002c, + 0x02020800, 0x001005d8, 0x58040202, 0x800000e0, + 0x81000540, 0x48001802, 0x58040000, 0x48001800, + 0x58040001, 0x48001801, 0x1c01f000, 0x4807c856, + 0x58cc0005, 0x80000040, 0x02001800, 0x001005d8, + 0x48019805, 0x58cc1003, 0x82080480, 0x00000005, + 0x02021800, 0x001005d8, 0x82080400, 0x00106418, + 0x50000000, 0x58cc0802, 0x80040c00, 0x80081000, + 0x82080480, 0x00000005, 0x0402000f, 0x58cc2002, + 0x58100000, 0x80006d40, 0x04000009, 0x4c340000, + 0x0401f858, 0x5c006800, 0x49786801, 0x48359802, + 0x58cc0004, 0x80000040, 0x48019804, 0x49799803, + 0x0401f002, 0x48099803, 0x1c01f000, 0x4807c856, + 0x41781800, 0x58c80201, 0x80000540, 0x04000002, + 0x800c1800, 0x58c80c01, 0x80040c80, 0x0400100a, + 0x04000009, 0x800c1800, 0x58c80202, 0x80041480, + 0x04001005, 0x04000004, 0x800c1800, 0x40080800, + 0x0401f7fb, 0x480d9204, 0x400c0000, 0x42002000, + 0x00000001, 0x80000040, 0x04000007, 0x04001006, + 0x80102000, 0x82000480, 0x00000005, 0x04000002, + 0x040217fc, 0x48119203, 0x1c01f000, 0x4807c856, + 0x4d2c0000, 0x58cc000a, 0x80000540, 0x02000800, + 0x001005d8, 0x82002400, 0x00000005, 0x0201f800, + 0x001007d3, 0x04000012, 0x492d9809, 0x497a5800, + 0x497a5801, 0x0201f800, 0x001007d3, 0x0400000c, + 0x58cc0009, 0x48025800, 0x497a5801, 0x492d9809, + 0x82102480, 0x00000005, 0x040217f7, 0x82000540, + 0x00000001, 0x5c025800, 0x1c01f000, 0x58cc0009, + 0x80025d40, 0x040007fc, 0x592c2000, 0x0201f800, + 0x001007f4, 0x40100000, 0x0401f7fa, 0x58cc0009, + 0x48cfc857, 0x80006d40, 0x04000005, 0x50340000, + 0x48019809, 0x49786800, 0x49786801, 0x1c01f000, + 0x4813c857, 0x58cc0009, 0x48002000, 0x48119809, + 0x1c01f000, 0x4807c856, 0x4d2c0000, 0x58cc0009, + 0x80025d40, 0x04000007, 0x592c0000, 0x4c000000, + 0x0201f800, 0x001007f4, 0x5c000000, 0x0401f7f9, + 0x5c025800, 0x1c01f000, 0x4807c856, 0x4d2c0000, + 0x58cc0002, 0x80025d40, 0x04000007, 0x592c0000, + 0x4c000000, 0x0201f800, 0x001007f4, 0x5c000000, + 0x0401f7f9, 0x49799800, 0x49799802, 0x49799801, + 0x49799803, 0x49799806, 0x49799807, 0x49799808, + 0x49799809, 0x4979980a, 0x5c025800, 0x1c01f000, + 0x00000003, 0x00000006, 0x00000009, 0x0000000c, + 0x0000000f, 0x00000012, 0x4803c856, 0x0401f857, + 0x4a00c204, 0x0000003c, 0x59301009, 0x82080580, + 0x0010b524, 0x04000013, 0x58080802, 0x82040d00, + 0x00ffffff, 0x58080403, 0x4804c005, 0x4800c406, + 0x4a00c207, 0x00000003, 0x59300811, 0x585c0404, + 0x4978c206, 0x4804c407, 0x80000540, 0x0400000d, + 0x58600206, 0x84000540, 0x4800c206, 0x0401f009, + 0x585c080a, 0x82040d00, 0x00ffffff, 0x4804c005, + 0x4a00c406, 0x000007ff, 0x4978c207, 0x0401f7ef, + 0x82603c00, 0x00000008, 0x58605404, 0x40282000, + 0x405c6000, 0x585c0a04, 0x82040d00, 0x0000000f, + 0x82040c00, 0x001010bd, 0x50044000, 0x80004d80, + 0x50200000, 0x80307400, 0x58380402, 0x8c244d00, + 0x04020003, 0x48003a00, 0x0401f003, 0x48003c00, + 0x801c3800, 0x80244800, 0x80102040, 0x04000006, + 0x0201f800, 0x0010109b, 0x02000800, 0x001005d8, + 0x0401f7f0, 0x1c01f000, 0x4803c856, 0x4d340000, + 0x59300009, 0x80026d40, 0x02000800, 0x001005d8, + 0x59340401, 0x80000540, 0x0400000e, 0x59840000, + 0x80000540, 0x0400000b, 0x836c0580, 0x00000003, + 0x04020008, 0x59341c03, 0x42002000, 0x00000004, + 0x42003000, 0x00000004, 0x0201f800, 0x00103aae, + 0x5c026800, 0x1c01f000, 0x4803c856, 0x80001580, + 0x58c80c01, 0x59300011, 0x80040c80, 0x48066011, + 0x58c80201, 0x80000540, 0x04000005, 0x80081000, + 0x80040c80, 0x04001007, 0x04000006, 0x58c80202, + 0x80081000, 0x80040c80, 0x04001002, 0x040207fd, + 0x4808bc08, 0x4808c404, 0x1c01f000, 0x4803c856, + 0x4a0370e5, 0x00020000, 0x59b800e5, 0x8c000524, + 0x040207fc, 0x4a0370e5, 0x00030000, 0x40000000, + 0x40000000, 0x59b800e5, 0x8c000524, 0x040207f5, + 0x5934000e, 0x80006d40, 0x04000010, 0x81300580, + 0x04020004, 0x58340000, 0x4802680e, 0x0401f00a, + 0x40347800, 0x58340000, 0x80006d40, 0x02000800, + 0x001005d8, 0x81300580, 0x040207fa, 0x58340000, + 0x48007800, 0x497a6000, 0x4a0370e5, 0x00020000, + 0x1c01f000, 0x4803c856, 0x4d300000, 0x4d2c0000, + 0x42000800, 0x000003ff, 0x4a0370e5, 0x00020000, + 0x59b800e5, 0x8c000524, 0x04000005, 0x80040840, + 0x040207fa, 0x0201f800, 0x001005d8, 0x4a0370e5, + 0x00030000, 0x40000000, 0x40000000, 0x59b800e5, + 0x8c000524, 0x040207f1, 0x5934000e, 0x80026540, + 0x0400000e, 0x4933c857, 0x59300000, 0x4802680e, + 0x4a026203, 0x00000004, 0x497a6206, 0x497a6009, + 0x4a026007, 0x00000101, 0x59325808, 0x497a5c08, + 0x0401fd81, 0x0401f7f1, 0x4a0370e5, 0x00020000, + 0x5c025800, 0x5c026000, 0x1c01f000, 0x4803c856, + 0x4c000000, 0x0201f800, 0x00105c9a, 0x04020011, + 0x0201f800, 0x001045a6, 0x02020800, 0x001005d8, + 0x5c000000, 0x48026802, 0x0201f800, 0x0002075a, + 0x04000009, 0x49366009, 0x4a026406, 0x00000001, + 0x42027000, 0x00000001, 0x0201f000, 0x000207a1, + 0x5c000000, 0x1c01f000, 0x59300203, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x4803c857, + 0x0c01f001, 0x00106503, 0x00106503, 0x00106503, + 0x00106505, 0x00106565, 0x00106503, 0x00106503, + 0x001065b7, 0x001065b8, 0x00106503, 0x00106503, + 0x00106503, 0x00106503, 0x00106503, 0x0201f800, + 0x001005d8, 0x493bc857, 0x83380480, 0x00000050, + 0x02021800, 0x001005d8, 0x83380480, 0x00000049, + 0x02001800, 0x001005d8, 0x0c01f001, 0x00106518, + 0x0010653a, 0x00106516, 0x00106516, 0x00106516, + 0x00106516, 0x00106549, 0x0201f800, 0x001005d8, + 0x4d2c0000, 0x59325808, 0x592c0206, 0x48025c06, + 0x4a025a06, 0x00000000, 0x4c5c0000, 0x592cbc0a, + 0x592c0000, 0x48026008, 0x0201f800, 0x00104cde, + 0x59300008, 0x80000540, 0x04000008, 0x4a026203, + 0x00000007, 0x42027000, 0x00000043, 0x5c00b800, + 0x5c025800, 0x0401f08a, 0x8c5cbd08, 0x04020006, + 0x4a026203, 0x00000007, 0x497a6206, 0x497a6008, + 0x0401f003, 0x0201f800, 0x0002077d, 0x5c00b800, + 0x5c025800, 0x1c01f000, 0x0201f800, 0x00106b8a, + 0x4d2c0000, 0x59325808, 0x0201f800, 0x00109037, + 0x04000006, 0x4d400000, 0x42028000, 0x00000001, + 0x0401f8f8, 0x5c028000, 0x5c025800, 0x0201f000, + 0x0002077d, 0x0201f800, 0x00106b8a, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x0010203c, 0x5c027800, + 0x42003000, 0x00000014, 0x0201f800, 0x0010a942, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x4d2c0000, 0x59325808, 0x0201f800, 0x00109037, + 0x04000006, 0x4d400000, 0x42028000, 0x00000029, + 0x0401f8dc, 0x5c028000, 0x5c025800, 0x0201f000, + 0x0002077d, 0x493bc857, 0x497a6206, 0x83380480, + 0x00000054, 0x02021800, 0x001005d8, 0x83380480, + 0x00000047, 0x02001800, 0x001005d8, 0x0c01f001, + 0x001065b6, 0x0010657f, 0x0010657d, 0x0010657d, + 0x0010657d, 0x0010657d, 0x0010657d, 0x0010657d, + 0x0010657d, 0x0010657d, 0x0010657d, 0x0010657d, + 0x00106583, 0x0201f800, 0x001005d8, 0x59300011, + 0x82000500, 0xffff0000, 0x04020034, 0x59840802, + 0x8c040d04, 0x04000025, 0x59300009, 0x80026d40, + 0x0400001f, 0x4c5c0000, 0x4c600000, 0x497a6206, + 0x5930b808, 0x585c0005, 0x8000c540, 0x02000800, + 0x001005d8, 0x0401fe8d, 0x40625800, 0x0201f800, + 0x00104cde, 0x4978b805, 0x0401fef5, 0x497a6009, + 0x585c3408, 0x0401fcbd, 0x0400000e, 0x42001000, + 0x0010b519, 0x0401fcf2, 0x0400000a, 0x0201f800, + 0x001007e4, 0x04000007, 0x492cb805, 0x585c5408, + 0x0401fc83, 0x5c00c000, 0x5c00b800, 0x1c01f000, + 0x0401fca9, 0x0401f7fc, 0x8c040d06, 0x040207fc, + 0x59300009, 0x80026d40, 0x04000006, 0x5934000e, + 0x80000540, 0x02020800, 0x001005d8, 0x497a6009, + 0x0401fd0d, 0x0401f7f2, 0x0401f06f, 0x4803c856, + 0x4803c856, 0x83380580, 0x00000043, 0x02020800, + 0x001005d8, 0x4a026203, 0x00000003, 0x493a6403, + 0x59325808, 0x592c000f, 0x48026011, 0x497a6013, + 0x592c0406, 0x800000c2, 0x800010c4, 0x80081400, + 0x480a6206, 0x0201f800, 0x00100f4e, 0x42000800, + 0x80000060, 0x0401f154, 0x42000000, 0x0010b875, + 0x0201f800, 0x0010aa47, 0x59300203, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x4803c857, + 0x82000d80, 0x00000003, 0x04000006, 0x82000d80, + 0x00000004, 0x04000045, 0x0201f800, 0x001005d8, + 0x0201f800, 0x00106c55, 0x59300004, 0x8c00053e, + 0x04020007, 0x0201f800, 0x00106b6c, 0x02020800, + 0x001005d8, 0x0201f000, 0x00106c4b, 0x0401f9c3, + 0x0201f800, 0x00106c4b, 0x59325808, 0x42028000, + 0x00000006, 0x0401f84b, 0x0201f000, 0x0002077d, + 0x4803c856, 0x59300203, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x82000d80, 0x00000003, + 0x04000006, 0x82000d80, 0x00000004, 0x04000023, + 0x0201f800, 0x001005d8, 0x4803c856, 0x0201f800, + 0x00106c55, 0x4df00000, 0x59300004, 0x8c00053e, + 0x04020006, 0x0201f800, 0x00106f60, 0x02020800, + 0x001005d8, 0x0401f010, 0x0201f800, 0x00108cd6, + 0x04020004, 0x0201f800, 0x00106e62, 0x0402000a, + 0x0401f99a, 0x02020800, 0x001005d8, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x82000540, 0x00000001, + 0x1c01f000, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x80000580, 0x1c01f000, 0x4933c857, 0x0201f800, + 0x00100e99, 0x4933c857, 0x4c5c0000, 0x4d340000, + 0x497a6206, 0x5930b808, 0x59300009, 0x80026d40, + 0x04020e5f, 0x42001000, 0x0010b519, 0x0401fc60, + 0x04000009, 0x58c80204, 0x4800bc08, 0x41785000, + 0x0201f800, 0x00106227, 0x5c026800, 0x5c00b800, + 0x1c01f000, 0x4978bc08, 0x0401fc17, 0x0401f7fb, + 0x4803c856, 0x0201f800, 0x00109037, 0x0400000f, + 0x592c0000, 0x80000d40, 0x04000009, 0x497a5800, + 0x49425a06, 0x4c040000, 0x0201f800, 0x000202da, + 0x5c000800, 0x40065800, 0x0401f7f6, 0x49425a06, + 0x0201f800, 0x000202da, 0x1c01f000, 0x4933c857, + 0x59300c06, 0x82040580, 0x0000000e, 0x04000004, + 0x82040580, 0x00000009, 0x04020004, 0x0401ffe5, + 0x497a6008, 0x80000580, 0x1c01f000, 0x592e6009, + 0x83300480, 0x0010d1c0, 0x04001016, 0x41580000, + 0x81300480, 0x04021013, 0x40040000, 0x59300c06, + 0x80040580, 0x04020012, 0x59300a03, 0x82040580, + 0x00000007, 0x02020800, 0x001005d8, 0x59300008, + 0x80000540, 0x02020800, 0x001005d8, 0x0201f800, + 0x0002077d, 0x42000000, 0x00000000, 0x0401f009, + 0x42000000, 0x00000008, 0x0401f006, 0x82040580, + 0x00000007, 0x040207fb, 0x42000000, 0x00000005, + 0x592c0a06, 0x48065c06, 0x48025a06, 0x0201f000, + 0x000202da, 0x4c0c0000, 0x4c100000, 0x4c140000, + 0x4c180000, 0x80001d80, 0x80002580, 0x42003000, + 0x00000020, 0x82040500, 0x00000001, 0x04000003, + 0x40080000, 0x800c1c00, 0x400c2800, 0x800c1902, + 0x80102102, 0x82140500, 0x00000001, 0x04000003, + 0x82102540, 0x80000000, 0x80040902, 0x80183040, + 0x040207f1, 0x40100800, 0x400c0000, 0x5c003000, + 0x5c002800, 0x5c002000, 0x5c001800, 0x1c01f000, + 0x4c580000, 0x4200b000, 0x00000020, 0x80000540, + 0x04000018, 0x80041c80, 0x04021016, 0x800810c2, + 0x80040982, 0x04001006, 0x80041c80, 0x04021005, + 0x8058b040, 0x040207fa, 0x0401f006, 0x80041c80, + 0x400c0800, 0x80081000, 0x8058b040, 0x040207f4, + 0x4c000000, 0x41f00000, 0x82000500, 0xf7ffffff, + 0x4003e000, 0x5c000000, 0x5c00b000, 0x1c01f000, + 0x4c000000, 0x41f00000, 0x82000540, 0x08000000, + 0x0401f7f8, 0x4a0378e8, 0x00000000, 0x4a03c821, + 0x00000010, 0x4a03c823, 0x00000004, 0x0401f82c, + 0x4a0378e9, 0x00003a0d, 0x4a0378e8, 0x00000001, + 0x42000000, 0x00001000, 0x50000000, 0x82000480, + 0x24220001, 0x04000004, 0x59e00002, 0x84000548, + 0x4803c002, 0x42000800, 0x00000005, 0x4203a000, + 0x00007600, 0x42000000, 0x00001000, 0x50000000, + 0x82000480, 0x24320001, 0x04021003, 0x4a03a005, + 0xd0000001, 0x59d00006, 0x4a03a005, 0x90000001, + 0x83d3a400, 0x00000020, 0x80040840, 0x040207fa, + 0x59e00003, 0x82000500, 0xffffffe0, 0x82000540, + 0x00008000, 0x4803c003, 0x59c40006, 0x82000500, + 0xfffcffff, 0x48038806, 0x1c01f000, 0x4d900000, + 0x4d180000, 0x4a0378e7, 0xaaaaaaaa, 0x4a0378e6, + 0xaaaaaaaa, 0x4a0378e5, 0xaaaaaaaa, 0x4a0378e4, + 0xaaaaaaaa, 0x42000800, 0x0000bf00, 0x4a00081a, + 0x0010b7d4, 0x4a00081b, 0x001010bd, 0x4a00081c, + 0x001010cd, 0x4a031800, 0x00000000, 0x4a031801, + 0x0010b544, 0x4a031802, 0x0010b54b, 0x42000800, + 0x0010b7d7, 0x417a3000, 0x811b20c8, 0x83932400, + 0x0000bf32, 0x48072000, 0x4a032001, 0x00000000, + 0x83180400, 0x001070ea, 0x50000000, 0x48032002, + 0x82040c00, 0x00000003, 0x811a3000, 0x83180480, + 0x00000005, 0x040017f1, 0x5c023000, 0x5c032000, + 0x1c01f000, 0x48066004, 0x497a6000, 0x497a6001, + 0x59bc00ea, 0x8c000516, 0x040207fe, 0x83300400, + 0xa0000000, 0x480378e1, 0x1c01f000, 0x4933c857, + 0x42000800, 0x80000040, 0x48066004, 0x497a6000, + 0x59bc00ea, 0x8c000516, 0x040207fe, 0x83300400, + 0x60000000, 0x480378e1, 0x1c01f000, 0x0201f800, + 0x00106c55, 0x4df00000, 0x4d300000, 0x4d340000, + 0x4d2c0000, 0x4d180000, 0x4c5c0000, 0x4c600000, + 0x4d900000, 0x4dd00000, 0x4da40000, 0x4d140000, + 0x42003000, 0x0000bf2e, 0x581a6001, 0x813261c0, + 0x0400002c, 0x41302800, 0x4178c000, 0x59300000, + 0x4c000000, 0x59326809, 0x5930b801, 0x59300406, + 0x82000d80, 0x00000006, 0x04020003, 0x8d3e7d18, + 0x04000010, 0x8d3e7d06, 0x04000007, 0x82000580, + 0x00000003, 0x04020004, 0x59340200, 0x8c00050e, + 0x04020008, 0x0401f92f, 0x4c0c0000, 0x4c140000, + 0x0401fb5f, 0x5c002800, 0x5c001800, 0x0401f005, + 0x41301800, 0x8060c1c0, 0x04020002, 0x400cc000, + 0x805cb9c0, 0x04000003, 0x405e6000, 0x0401f7e3, + 0x5c026000, 0x813261c0, 0x04000006, 0x8060c1c0, + 0x04000002, 0x40602800, 0x4178c000, 0x0401f7d8, + 0x417a3000, 0x0201f800, 0x001070d8, 0x59926004, + 0x813261c0, 0x04000023, 0x59326809, 0x4130c000, + 0x59300001, 0x8000bd40, 0x04000016, 0x40026000, + 0x40602800, 0x5930b801, 0x59300406, 0x82000d80, + 0x00000006, 0x0400000e, 0x8d3e7d06, 0x04000007, + 0x82000580, 0x00000003, 0x04020004, 0x59340200, + 0x8c00050e, 0x04020006, 0x0401f8dc, 0x4c140000, + 0x0401fb2f, 0x5c002800, 0x0401f002, 0x41302800, + 0x405e6000, 0x813261c0, 0x040207eb, 0x8060c1c0, + 0x04000004, 0x40626000, 0x4178c000, 0x0401f7e7, + 0x811a3000, 0x83180480, 0x00000005, 0x040017d6, + 0x5c022800, 0x5c034800, 0x5c03a000, 0x5c032000, + 0x5c00c000, 0x5c00b800, 0x5c023000, 0x5c025800, + 0x5c026800, 0x5c026000, 0x5c03e000, 0x02000800, + 0x00106c4b, 0x1c01f000, 0x4933c857, 0x0201f800, + 0x00106c55, 0x4df00000, 0x4d340000, 0x4d180000, + 0x4d900000, 0x42003000, 0x0000bf2e, 0x59326809, + 0x58182001, 0x40102800, 0x801021c0, 0x04000016, + 0x41300000, 0x80100580, 0x04000011, 0x58100009, + 0x81340580, 0x0402000b, 0x40101800, 0x58102001, + 0x41300000, 0x801021c0, 0x0400000b, 0x80100d80, + 0x04000007, 0x40101800, 0x58102001, 0x0401f7fa, + 0x40102800, 0x58102000, 0x0401f7ec, 0x0401f8bd, + 0x0401f01a, 0x42032000, 0x0000bf32, 0x417a3000, + 0x59902004, 0x40102800, 0x801021c0, 0x0400000b, + 0x58100009, 0x81340580, 0x04020008, 0x41300000, + 0x80100580, 0x0400000c, 0x40102800, 0x58102001, + 0x801021c0, 0x040207fa, 0x811a3000, 0x83180480, + 0x00000005, 0x0402100d, 0x83932400, 0x00000010, + 0x0401f7ec, 0x0401f881, 0x5c032000, 0x5c023000, + 0x5c026800, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x80000580, 0x1c01f000, 0x0401fb6f, 0x040007f7, + 0x5c032000, 0x5c023000, 0x5c026800, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x82000540, 0x00000001, + 0x1c01f000, 0x0201f800, 0x00106c55, 0x4df00000, + 0x4d300000, 0x4d340000, 0x4d180000, 0x4d2c0000, + 0x4c5c0000, 0x4c600000, 0x4d900000, 0x4dd00000, + 0x4da40000, 0x4d140000, 0x42003000, 0x0000bf2e, + 0x581a6001, 0x813261c0, 0x04000023, 0x41302800, + 0x5930b800, 0x59326809, 0x59340403, 0x81440580, + 0x04000006, 0x805cb9c0, 0x0400001b, 0x41302800, + 0x405e6000, 0x0401f7f7, 0x5930b801, 0x8d3e7d00, + 0x04000003, 0x0401fb67, 0x0402000e, 0x59300406, + 0x82000580, 0x00000006, 0x04020003, 0x8d3e7d18, + 0x04000008, 0x0401f867, 0x4c0c0000, 0x4c140000, + 0x0401fa97, 0x5c002800, 0x5c001800, 0x0401f002, + 0x41301800, 0x405e6000, 0x813261c0, 0x040207eb, + 0x0401f02d, 0x417a3000, 0x0201f800, 0x001070d8, + 0x59926004, 0x813261c0, 0x04000005, 0x59326809, + 0x59340403, 0x81440580, 0x04000006, 0x811a3000, + 0x83180480, 0x00000005, 0x040017f4, 0x0401f01e, + 0x4130c000, 0x59300001, 0x8000bd40, 0x04000012, + 0x40026000, 0x40602800, 0x5930b801, 0x8d3e7d00, + 0x04000003, 0x0401fb3b, 0x0402000a, 0x59300406, + 0x82000580, 0x00000006, 0x04000006, 0x0401f81b, + 0x4c140000, 0x0401fa6e, 0x5c002800, 0x0401f002, + 0x41302800, 0x405e6000, 0x813261c0, 0x040207ef, + 0x8060c1c0, 0x04000004, 0x40626000, 0x4178c000, + 0x0401f7eb, 0x5c022800, 0x5c034800, 0x5c03a000, + 0x5c032000, 0x5c00c000, 0x5c00b800, 0x5c025800, + 0x5c023000, 0x5c026800, 0x5c026000, 0x5c03e000, + 0x04000be3, 0x1c01f000, 0x0401fbc8, 0x59900004, + 0x81300580, 0x04020018, 0x4c140000, 0x0201f800, + 0x00106dc3, 0x0401fbb8, 0x5c002800, 0x59300001, + 0x800001c0, 0x04020003, 0x497a680c, 0x1c01f000, + 0x42003000, 0x0000bf2e, 0x497a6001, 0x58180801, + 0x800409c0, 0x04020004, 0x48003000, 0x48003001, + 0x1c01f000, 0x58180800, 0x48000800, 0x48003000, + 0x1c01f000, 0x59300001, 0x48002801, 0x800001c0, + 0x04020002, 0x4816680c, 0x497a6001, 0x1c01f000, + 0x0401fba6, 0x42003000, 0x0000bf2e, 0x58180001, + 0x81300580, 0x0402001c, 0x59300801, 0x800409c0, + 0x0400000e, 0x59300000, 0x800001c0, 0x04020005, + 0x48043001, 0x48043000, 0x497a6001, 0x1c01f000, + 0x59300000, 0x48000800, 0x48043001, 0x497a6000, + 0x497a6001, 0x1c01f000, 0x59300800, 0x800409c0, + 0x04020005, 0x49783001, 0x49783000, 0x497a680c, + 0x1c01f000, 0x48043001, 0x497a6000, 0x497a680c, + 0x1c01f000, 0x58180000, 0x81300580, 0x0402000c, + 0x59300001, 0x800001c0, 0x04020005, 0x48143000, + 0x49782800, 0x497a680c, 0x1c01f000, 0x48003000, + 0x48002800, 0x497a6001, 0x1c01f000, 0x59300000, + 0x800001c0, 0x04020008, 0x59300001, 0x48001801, + 0x800001c0, 0x04020002, 0x480e680c, 0x497a6001, + 0x1c01f000, 0x59300801, 0x800409c0, 0x04020006, + 0x59300800, 0x48042800, 0x497a6000, 0x497a680c, + 0x1c01f000, 0x59300000, 0x48000800, 0x48042800, + 0x497a6000, 0x497a6001, 0x1c01f000, 0x0401fb82, + 0x4df00000, 0x0401f839, 0x040208c4, 0x04020945, + 0x04020a89, 0x04020005, 0x5c03e000, 0x04000b70, + 0x80000580, 0x1c01f000, 0x5c03e000, 0x04000b6c, + 0x82000540, 0x00000001, 0x1c01f000, 0x4d2c0000, + 0x4d340000, 0x4d300000, 0x41783000, 0x598e6009, + 0x813261c0, 0x04000021, 0x59300406, 0x82000580, + 0x00000006, 0x04020004, 0x8d3e7d18, 0x0402000a, + 0x0401f017, 0x82040580, 0x00000005, 0x04020006, + 0x8d3e7d16, 0x04000004, 0x59300420, 0x8c000500, + 0x0402000f, 0x0401fa4e, 0x59300000, 0x4c000000, + 0x8d3e7d06, 0x04000004, 0x0201f800, 0x001092d7, + 0x04000005, 0x0401f867, 0x4c180000, 0x0401f9bc, + 0x5c003000, 0x5c026000, 0x0401f7e2, 0x41303000, + 0x59326000, 0x0401f7df, 0x5c026000, 0x5c026800, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x4c5c0000, + 0x813261c0, 0x02000800, 0x001005d8, 0x41300000, + 0x598cb809, 0x41783000, 0x805cb9c0, 0x04000013, + 0x805c0d80, 0x04000004, 0x405c3000, 0x5818b800, + 0x0401f7fa, 0x0401f84b, 0x598c000d, 0x81300580, + 0x02000800, 0x001070b9, 0x59300403, 0x82000580, + 0x00000042, 0x04020002, 0x497a6007, 0x80000580, + 0x5c00b800, 0x1c01f000, 0x82000540, 0x00000001, + 0x5c00b800, 0x1c01f000, 0x0401fb27, 0x4df00000, + 0x4d2c0000, 0x4d340000, 0x4d300000, 0x41783000, + 0x598e6009, 0x813261c0, 0x0400002c, 0x59300c06, + 0x82040580, 0x00000006, 0x04020004, 0x8d3e7d18, + 0x0402000a, 0x0401f022, 0x82040580, 0x00000005, + 0x04020006, 0x8d3e7d18, 0x04000004, 0x59300420, + 0x8c000500, 0x0402001a, 0x59326809, 0x59340403, + 0x81440580, 0x04020016, 0x8d3e7d00, 0x04000006, + 0x82040580, 0x00000003, 0x04020011, 0x0401fa35, + 0x0402000f, 0x0401f9f6, 0x59300000, 0x4c000000, + 0x8d3e7d06, 0x04000004, 0x0201f800, 0x001092d7, + 0x04000005, 0x0401f80f, 0x4c180000, 0x0401f964, + 0x5c003000, 0x5c026000, 0x0401f7d7, 0x41303000, + 0x59326000, 0x0401f7d4, 0x5c026000, 0x5c026800, + 0x5c025800, 0x5c03e000, 0x04000ae5, 0x1c01f000, + 0x59300800, 0x497a6000, 0x0401fac8, 0x801831c0, + 0x04020009, 0x598c0008, 0x81300580, 0x04020004, + 0x48031808, 0x48031809, 0x0401f008, 0x48071809, + 0x0401f006, 0x48043000, 0x598c0008, 0x81300580, + 0x04020002, 0x481b1808, 0x0401f2ca, 0x4d2c0000, + 0x4d300000, 0x4d340000, 0x41783000, 0x598e600b, + 0x813261c0, 0x04000013, 0x8d3e7d06, 0x04000005, + 0x59326809, 0x59340200, 0x8c00050e, 0x0402000a, + 0x0401f9bf, 0x59300000, 0x4c000000, 0x0401f853, + 0x4c180000, 0x0401f932, 0x5c003000, 0x5c026000, + 0x0401f7f0, 0x41303000, 0x59326000, 0x0401f7ed, + 0x0201f800, 0x00104773, 0x5c026800, 0x5c026000, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x4c5c0000, + 0x813261c0, 0x02000800, 0x001005d8, 0x41300000, + 0x598cb80b, 0x41783000, 0x805cb9c0, 0x0400000f, + 0x805c0d80, 0x04000004, 0x405c3000, 0x5818b800, + 0x0401f7fa, 0x0401f835, 0x598c000d, 0x81300580, + 0x02000800, 0x001070b9, 0x497a6007, 0x80000580, + 0x5c00b800, 0x1c01f000, 0x82000540, 0x00000001, + 0x5c00b800, 0x1c01f000, 0x0401fa9f, 0x4df00000, + 0x4d340000, 0x4d300000, 0x4d2c0000, 0x0201f800, + 0x00020245, 0x02020800, 0x001005d8, 0x41783000, + 0x598e600b, 0x813261c0, 0x04000014, 0x59300009, + 0x81340580, 0x0402000e, 0x8d3e7d00, 0x04000003, + 0x0401f9bc, 0x0402000a, 0x0401f97d, 0x59300000, + 0x4c000000, 0x0401f811, 0x4c180000, 0x0401f8f0, + 0x5c003000, 0x5c026000, 0x0401f7ef, 0x41303000, + 0x59326000, 0x0401f7ec, 0x0201f800, 0x0010479c, + 0x5c025800, 0x5c026000, 0x5c026800, 0x5c03e000, + 0x04000a6f, 0x1c01f000, 0x59300800, 0x497a6000, + 0x0401fa52, 0x801831c0, 0x04020009, 0x598c000a, + 0x81300580, 0x04020004, 0x4803180a, 0x4803180b, + 0x0401f008, 0x4807180b, 0x0401f006, 0x48043000, + 0x598c000a, 0x81300580, 0x04020002, 0x481b180a, + 0x0401f254, 0x0401fa64, 0x4df00000, 0x4d300000, + 0x598e6005, 0x813261c0, 0x04000020, 0x59300000, + 0x4c000000, 0x59300c06, 0x82040580, 0x00000011, + 0x04020007, 0x833c0500, 0x00001800, 0x04000015, + 0x8d3e7d16, 0x04020013, 0x0401f009, 0x82040580, + 0x00000004, 0x04020006, 0x8d3e7d16, 0x04000004, + 0x59300420, 0x8c000500, 0x0402000a, 0x0201f800, + 0x0010914e, 0x02000800, 0x0010801c, 0x0201f800, + 0x00109326, 0x0201f800, 0x0002077d, 0x0401fa31, + 0x5c026000, 0x0401f7e0, 0x497b1805, 0x497b1804, + 0x5c026000, 0x5c03e000, 0x04000a31, 0x1c01f000, + 0x4933c857, 0x4c5c0000, 0x4c600000, 0x813261c0, + 0x02000800, 0x001005d8, 0x41300000, 0x598cb805, + 0x405cc000, 0x805cb9c0, 0x04000025, 0x805c0d80, + 0x04000004, 0x405cc000, 0x5860b800, 0x0401f7fa, + 0x598c000d, 0x81300580, 0x02000800, 0x001070b9, + 0x0401fa02, 0x598c0005, 0x805c0580, 0x04020009, + 0x585c0000, 0x48031805, 0x4978b800, 0x598c0004, + 0x805c0580, 0x0402000d, 0x497b1804, 0x0401f00b, + 0x598c0004, 0x805c0580, 0x04020005, 0x48631804, + 0x4978b800, 0x4978c000, 0x0401f004, 0x585c0000, + 0x4800c000, 0x4978b800, 0x0401f9fe, 0x80000580, + 0x5c00c000, 0x5c00b800, 0x1c01f000, 0x82000540, + 0x00000001, 0x5c00c000, 0x5c00b800, 0x1c01f000, + 0x4933c857, 0x0401fa04, 0x4df00000, 0x4d2c0000, + 0x4d340000, 0x4d300000, 0x4c5c0000, 0x4178b800, + 0x8d3e7d18, 0x0400000d, 0x8d3e7d16, 0x0402000b, + 0x0201f800, 0x00109037, 0x04000008, 0x0201f800, + 0x00109597, 0x04020005, 0x592c0207, 0x492fc857, + 0x8200bd00, 0x0000000f, 0x41783000, 0x598e6005, + 0x813261c0, 0x04000029, 0x59326809, 0x813669c0, + 0x04000023, 0x59340403, 0x81440580, 0x04020020, + 0x59300c06, 0x82040580, 0x00000011, 0x0400001a, + 0x82040580, 0x00000004, 0x04020004, 0x59300420, + 0x8c000500, 0x04020016, 0x0201f800, 0x00109037, + 0x04000008, 0x0201f800, 0x00109597, 0x04020005, + 0x59300403, 0x82000580, 0x00000043, 0x0400000c, + 0x0401f8c3, 0x59300000, 0x4c000000, 0x0401f812, + 0x4c180000, 0x0401f836, 0x5c003000, 0x5c026000, + 0x0401f7dc, 0x805cb9c0, 0x040207ec, 0x41303000, + 0x59326000, 0x0401f7d7, 0x5c00b800, 0x5c026000, + 0x5c026800, 0x5c025800, 0x5c03e000, 0x040009b4, + 0x1c01f000, 0x59300800, 0x497a6000, 0x0401f997, + 0x801831c0, 0x04020009, 0x598c0004, 0x81300580, + 0x04020004, 0x48031804, 0x48031805, 0x0401f008, + 0x48071805, 0x0401f006, 0x48043000, 0x598c0004, + 0x81300580, 0x04020002, 0x481b1804, 0x0401f199, + 0x4943c857, 0x0401f9a8, 0x4df00000, 0x0401fe34, + 0x0401fecb, 0x5c03e000, 0x04000999, 0x1c01f000, + 0x4947c857, 0x0401f9a0, 0x4df00000, 0x4d3c0000, + 0x853e7d00, 0x0401fe75, 0x0401fefc, 0x5c027800, + 0x5c03e000, 0x0400098e, 0x1c01f000, 0x5c000000, + 0x4c000000, 0x4803c857, 0x4d340000, 0x4d2c0000, + 0x59326809, 0x59325808, 0x59300406, 0x82000c80, + 0x00000012, 0x02021800, 0x001005d8, 0x4933c857, + 0x4943c857, 0x493fc857, 0x4803c857, 0x0c01f804, + 0x5c025800, 0x5c026800, 0x1c01f000, 0x00106ae5, + 0x00106ae7, 0x00106af1, 0x00106b0b, 0x00106ae7, + 0x00106afb, 0x00106b23, 0x00106ae5, 0x00106ae5, + 0x00106b36, 0x00106b2d, 0x00106ae5, 0x00106ae5, + 0x00106ae5, 0x00106ae5, 0x00106ae5, 0x00106b3c, + 0x00106b3c, 0x0201f800, 0x001005d8, 0x0201f800, + 0x00109134, 0x02000800, 0x00102074, 0x0201f800, + 0x00109326, 0x0201f800, 0x0010801c, 0x0201f000, + 0x00107911, 0x812e59c0, 0x02020800, 0x001005d8, + 0x5930021d, 0x82000580, 0x00000003, 0x02000800, + 0x0010912a, 0x0201f000, 0x00107911, 0x0201f800, + 0x00109037, 0x02000000, 0x00107911, 0x592c1204, + 0x82081500, 0x000000ff, 0x82080580, 0x00000055, + 0x02020800, 0x001005d8, 0x49425a06, 0x0201f800, + 0x000202da, 0x0201f000, 0x00107911, 0x59300004, + 0x8400055c, 0x48026004, 0x59300007, 0x8c000500, + 0x02020800, 0x00100e99, 0x0201f800, 0x00109037, + 0x0400000d, 0x4a025a04, 0x00000103, 0x49425a06, + 0x497a5c09, 0x0201f800, 0x001091c6, 0x0201f800, + 0x0010a693, 0x0201f800, 0x000202da, 0x0201f800, + 0x0010912a, 0x0201f000, 0x00107911, 0x59300007, + 0x8c000500, 0x02020800, 0x00100e99, 0x0201f800, + 0x00109037, 0x02020800, 0x0010a3ef, 0x0201f000, + 0x00107911, 0x0201f800, 0x00109037, 0x04000005, + 0x49425a06, 0x497a5c09, 0x0201f800, 0x000202da, + 0x0201f000, 0x00107911, 0x0201f800, 0x00109037, + 0x02020800, 0x0010664f, 0x0201f000, 0x00107911, + 0x0201f800, 0x00109037, 0x04000004, 0x49425a06, + 0x0201f800, 0x000202da, 0x59325817, 0x0201f800, + 0x001007fd, 0x0201f000, 0x00107911, 0x598c000d, + 0x81300580, 0x04000003, 0x497a6007, 0x1c01f000, + 0x59c40004, 0x82000500, 0x0000000c, 0x04000005, + 0x4a038804, 0x0000000c, 0x497b2807, 0x0401f00a, + 0x0401facd, 0x59300403, 0x82000d80, 0x00000040, + 0x04000004, 0x82000580, 0x00000042, 0x04020002, + 0x497a6007, 0x0201f800, 0x001070b9, 0x80000580, + 0x1c01f000, 0x59300804, 0x8c040d3e, 0x04020004, + 0x82000540, 0x00000001, 0x0401f005, 0x4933c857, + 0x84040d3e, 0x48066004, 0x80000580, 0x1c01f000, + 0x59300804, 0x8c040d20, 0x04020004, 0x82000540, + 0x00000001, 0x1c01f000, 0x4933c857, 0x4d380000, + 0x59300804, 0x84040d20, 0x48066004, 0x42027000, + 0x00000049, 0x59300203, 0x82000580, 0x00000003, + 0x04000003, 0x42027000, 0x00000013, 0x0201f800, + 0x000207a1, 0x80000580, 0x5c027000, 0x1c01f000, + 0x59300017, 0x81480580, 0x04020003, 0x59300018, + 0x814c0580, 0x1c01f000, 0x4d2c0000, 0x4d300000, + 0x0401f8c9, 0x4df00000, 0x0201f800, 0x00106062, + 0x59900001, 0x82000500, 0x00000003, 0x0c01f001, + 0x00106bba, 0x00106b9a, 0x00106b98, 0x00106b98, + 0x0201f800, 0x001005d8, 0x59926004, 0x0401f88e, + 0x813261c0, 0x0400001d, 0x59300004, 0x8c000516, + 0x04000004, 0x59325808, 0x497a5808, 0x497a5809, + 0x0401f88e, 0x59300001, 0x800001c0, 0x0400000e, + 0x497a6001, 0x42003000, 0x0000bf2e, 0x58180801, + 0x800409c0, 0x04020004, 0x48003001, 0x48003000, + 0x0401f00a, 0x58180800, 0x48000800, 0x48003000, + 0x0401f006, 0x59300809, 0x800409c0, 0x02000800, + 0x001005d8, 0x4978080c, 0x5c03e000, 0x04000890, + 0x5c026000, 0x5c025800, 0x1c01f000, 0x4d300000, + 0x497b2807, 0x0401f894, 0x4df00000, 0x598c0000, + 0x82000500, 0x00000007, 0x4803c857, 0x0c01f001, + 0x00106bef, 0x00106bd2, 0x00106bdb, 0x00106bdf, + 0x00106bea, 0x00106bef, 0x00106bd0, 0x00106bd0, + 0x0201f800, 0x001005d8, 0x598c000d, 0x80026540, + 0x04000004, 0x0401f81e, 0x02020800, 0x001005d8, + 0x0201f800, 0x001070b9, 0x0401f015, 0x0401f827, + 0x0201f800, 0x001070b9, 0x0401f011, 0x598c000d, + 0x80026540, 0x0400000e, 0x0401f838, 0x04000004, + 0x0401f80f, 0x04000002, 0x0401f81c, 0x0201f800, + 0x001070b9, 0x0401f006, 0x0401f830, 0x02020800, + 0x001005d8, 0x0201f800, 0x001070b9, 0x5c03e000, + 0x0400085b, 0x5c026000, 0x1c01f000, 0x598c0009, + 0x81300580, 0x0402000c, 0x0401f84e, 0x0401f83b, + 0x59300000, 0x800001c0, 0x04000004, 0x48031809, + 0x497a6000, 0x0401f003, 0x497b1809, 0x497b1808, + 0x80000580, 0x1c01f000, 0x4d2c0000, 0x59300406, + 0x82000580, 0x00000003, 0x04020012, 0x598c000b, + 0x81300580, 0x0402000f, 0x0401f83a, 0x59325808, + 0x497a5808, 0x497a5809, 0x0401f824, 0x59300000, + 0x800001c0, 0x04000004, 0x4803180b, 0x497a6000, + 0x0401f003, 0x497b180a, 0x497b180b, 0x80000580, + 0x5c025800, 0x1c01f000, 0x598c0005, 0x81300580, + 0x0402000c, 0x0401f827, 0x0401f814, 0x59300000, + 0x800001c0, 0x04000004, 0x48031805, 0x497a6000, + 0x0401f003, 0x497b1805, 0x497b1804, 0x80000580, + 0x1c01f000, 0x4a032001, 0x00000000, 0x497b2004, + 0x497b2005, 0x59900006, 0x82000500, 0x0000ffff, + 0x48032006, 0x1c01f000, 0x4c040000, 0x59300004, + 0x82000500, 0x7ffeffff, 0x48026004, 0x59bc00e4, + 0x8c000514, 0x04000009, 0x42000800, 0x0000bf00, + 0x58040012, 0x81300580, 0x04020004, 0x49780812, + 0x4a0378e4, 0x00000800, 0x5c000800, 0x1c01f000, + 0x4803c856, 0x598c000c, 0x80000540, 0x04000003, + 0x80000040, 0x4803180c, 0x1c01f000, 0x59bc00ea, + 0x82000500, 0x00000007, 0x82000580, 0x00000003, + 0x04020004, 0x4803c856, 0x4a0378e8, 0x00000001, + 0x1c01f000, 0x59bc00ea, 0x82000500, 0x00000007, + 0x82000580, 0x00000001, 0x04020011, 0x4803c856, + 0x42000800, 0x00000000, 0x0401f80e, 0x42000800, + 0x00001000, 0x59bc00ea, 0x82000500, 0x00000007, + 0x82000580, 0x00000003, 0x04000005, 0x80040840, + 0x040207f9, 0x0201f800, 0x001005d8, 0x1c01f000, + 0x59bc00ea, 0x82000500, 0x00000007, 0x82000580, + 0x00000001, 0x02020800, 0x001005d8, 0x59bc00ea, + 0x8c000516, 0x040207fe, 0x480778e1, 0x1c01f000, + 0x59bc00ea, 0x8c000516, 0x040207fe, 0x480778e1, + 0x59bc00ea, 0x8c000516, 0x040207fe, 0x480b78e1, + 0x1c01f000, 0x82000d00, 0x80000018, 0x02020800, + 0x001005d0, 0x0201f800, 0x001005d8, 0x00106c97, + 0x00106d3b, 0x00106d55, 0x00106c97, 0x00106c99, + 0x00106cba, 0x00106cd9, 0x00106d0d, 0x00106c97, + 0x00106d39, 0x00106c97, 0x00106c97, 0x00106c97, + 0x00106c97, 0x00106c97, 0x00106c97, 0x0201f800, + 0x001005d8, 0x4d300000, 0x4d900000, 0x4dd00000, + 0x4da40000, 0x4d140000, 0x0201f800, 0x001070d8, + 0x59bc00ea, 0x8c000510, 0x040007fe, 0x59be60e0, + 0x59300004, 0x8c000520, 0x04000011, 0x82000500, + 0xfffefeff, 0x48026004, 0x4a026203, 0x00000003, + 0x0401ffa9, 0x0201f800, 0x00100fd0, 0x5c022800, + 0x5c034800, 0x5c03a000, 0x5c032000, 0x5c026000, + 0x4a0378e4, 0x00000008, 0x0401f795, 0x84000510, + 0x48026004, 0x0401f7f6, 0x4d300000, 0x4d900000, + 0x4dd00000, 0x4da40000, 0x4d140000, 0x0201f800, + 0x001070d8, 0x59bc00ea, 0x8c000510, 0x040007fe, + 0x59be60e0, 0x59300004, 0x8c000520, 0x0400000f, + 0x82000500, 0xfffefeff, 0x48026004, 0x0401ff8a, + 0x0201f800, 0x0010100e, 0x5c022800, 0x5c034800, + 0x5c03a000, 0x5c032000, 0x5c026000, 0x4a0378e4, + 0x00000008, 0x0401f776, 0x84000510, 0x48026004, + 0x0401f7f6, 0x4d300000, 0x4d2c0000, 0x4d340000, + 0x4da40000, 0x4cd00000, 0x59bc00ea, 0x8c000510, + 0x040007fe, 0x59be60e0, 0x813261c0, 0x02000800, + 0x001005d8, 0x59300004, 0x8c000520, 0x0400001d, + 0x82000500, 0xfffefeff, 0x48026004, 0x59326809, + 0x42034800, 0x0010b544, 0x04011000, 0x4a03c840, + 0x0010b54b, 0x4a03c842, 0x00000012, 0x04011000, + 0x4a03c840, 0x0010b55d, 0x4a03c842, 0x000000ff, + 0x04011000, 0x4a03c840, 0x0010b65c, 0x4a03c842, + 0x000000ff, 0x0401fbf2, 0x5c01a000, 0x5c034800, + 0x5c026800, 0x5c025800, 0x5c026000, 0x1c01f000, + 0x84000510, 0x48026004, 0x5c01a000, 0x5c034800, + 0x5c026800, 0x5c025800, 0x5c026000, 0x1c01f000, + 0x1c01f000, 0x4d300000, 0x4d2c0000, 0x4d340000, + 0x4cd00000, 0x4d900000, 0x4dd00000, 0x4da40000, + 0x4d140000, 0x0401fbc3, 0x59bc00ea, 0x8c000510, + 0x040007fe, 0x59be60e0, 0x813261c0, 0x02000800, + 0x001005d8, 0x59300004, 0x8c000520, 0x0400000f, + 0x82000500, 0xfffefeff, 0x48026004, 0x0201f800, + 0x0010783a, 0x5c022800, 0x5c034800, 0x5c03a000, + 0x5c032000, 0x5c01a000, 0x5c026800, 0x5c025800, + 0x5c026000, 0x1c01f000, 0x84000510, 0x48026004, + 0x5c022800, 0x5c034800, 0x5c03a000, 0x5c032000, + 0x5c01a000, 0x5c026800, 0x5c025800, 0x5c026000, + 0x1c01f000, 0x0201f800, 0x001005d8, 0x4d300000, + 0x4d380000, 0x42000000, 0x0010b8c4, 0x0201f800, + 0x0010aa47, 0x0401ff14, 0x598e600d, 0x59c40004, + 0x8c000506, 0x04000004, 0x0401f8db, 0x4a038804, + 0x00000008, 0x813261c0, 0x04000006, 0x0401fb87, + 0x42027000, 0x00000014, 0x0201f800, 0x000207a1, + 0x4a0378e4, 0x00000002, 0x5c027000, 0x5c026000, + 0x0401f6f7, 0x4d180000, 0x4d300000, 0x4d380000, + 0x4d900000, 0x4dd00000, 0x4da40000, 0x4d140000, + 0x0401fef9, 0x417a3000, 0x59c40804, 0x83180400, + 0x0010709f, 0x50000000, 0x80040500, 0x0400001b, + 0x42000000, 0x0010b8c5, 0x0201f800, 0x0010aa47, + 0x0401fb70, 0x59926004, 0x0401f859, 0x83180400, + 0x0010709f, 0x50000000, 0x48038804, 0x813261c0, + 0x0400000a, 0x59300004, 0x8c00050c, 0x04020003, + 0x4a026203, 0x00000003, 0x42027000, 0x0000004a, + 0x0201f800, 0x000207a1, 0x59c40004, 0x82000500, + 0x00f80000, 0x04000005, 0x811a3000, 0x83180480, + 0x00000005, 0x040017dd, 0x4a0378e4, 0x00000008, + 0x5c022800, 0x5c034800, 0x5c03a000, 0x5c032000, + 0x5c027000, 0x5c026000, 0x5c023000, 0x0401f6c0, + 0x4d2c0000, 0x4d340000, 0x59326809, 0x598c0800, + 0x82040580, 0x00000004, 0x04020004, 0x838c1400, + 0x00000005, 0x0401f00c, 0x82040580, 0x00000001, + 0x04020004, 0x838c1400, 0x00000009, 0x0401f006, + 0x82040580, 0x00000002, 0x04020022, 0x838c1400, + 0x0000000b, 0x41306800, 0x58340000, 0x80007d40, + 0x0400001c, 0x583c0009, 0x81340580, 0x04020006, + 0x403c6800, 0x583c0000, 0x80007d40, 0x040207fa, + 0x0401f014, 0x4933c857, 0x483fc857, 0x583c0000, + 0x48006800, 0x49307800, 0x443c1000, 0x80000580, + 0x4803180d, 0x4803180f, 0x598c0000, 0x82000580, + 0x00000003, 0x04000003, 0x4a031800, 0x00000000, + 0x80000580, 0x5c026800, 0x5c025800, 0x1c01f000, + 0x82000540, 0x00000001, 0x0401f7fb, 0x491bc857, + 0x59c80840, 0x82040540, 0x00000010, 0x48039040, + 0x59c41008, 0x82080500, 0xffffff7f, 0x48038808, + 0x4c040000, 0x4c080000, 0x0401fabb, 0x04020007, + 0x0401fabf, 0x04000022, 0x48038804, 0x0201f800, + 0x0010107a, 0x0401f042, 0x4a038803, 0x00000008, + 0x59c40003, 0x82000500, 0x00000003, 0x040007fd, + 0x8c000502, 0x04020007, 0x0401fab1, 0x04000014, + 0x48038804, 0x0201f800, 0x0010107a, 0x0401f034, + 0x59c80040, 0x8400056a, 0x48039040, 0x59c80040, + 0x8c00052a, 0x040207fe, 0x59c40005, 0x82000500, + 0xc0000000, 0x04000006, 0x59c400a3, 0x84000540, + 0x480388a3, 0x4a038805, 0xc0000000, 0x0201f800, + 0x0010101d, 0x4a03a005, 0x30000000, 0x59d00006, + 0x4a03a005, 0x30000000, 0x59900006, 0x82000500, + 0xffff0000, 0x48032006, 0x59d00005, 0x8c000504, + 0x040207fe, 0x42000800, 0x00007600, 0x83180540, + 0x60000000, 0x480008a1, 0x811800dc, 0x59c80840, + 0x80040540, 0x48039040, 0x82000540, 0x00003000, + 0x48039040, 0x59c80040, 0x82000500, 0x00003000, + 0x040207fd, 0x0201f800, 0x00101068, 0x83180400, + 0x0010709f, 0x50000000, 0x48038804, 0x80000580, + 0x4df00000, 0x0201f800, 0x00106062, 0x5c03e000, + 0x5c001000, 0x5c000800, 0x480b8808, 0x48079040, + 0x1c01f000, 0x4803c856, 0x59c80840, 0x82040540, + 0x00000010, 0x48039040, 0x59c41008, 0x82080500, + 0xffffff7f, 0x48038808, 0x4c040000, 0x4c080000, + 0x59c40004, 0x82000500, 0x00000003, 0x04020010, + 0x59c40004, 0x82000500, 0x0000000c, 0x04000005, + 0x4a038804, 0x0000000c, 0x8c000504, 0x0401f025, + 0x59c80040, 0x8400056e, 0x48039040, 0x59c80040, + 0x8c00052e, 0x040207fe, 0x0401f01e, 0x4a038803, + 0x00000008, 0x59c40003, 0x82000500, 0x00000003, + 0x040007fd, 0x8c000502, 0x04020006, 0x59c40004, + 0x4a038804, 0x0000000c, 0x8c000504, 0x0401f011, + 0x59c80040, 0x8400056a, 0x48039040, 0x59c80040, + 0x8c00052a, 0x040207fe, 0x59c40005, 0x82000500, + 0xc0000000, 0x04000007, 0x59c400a3, 0x84000540, + 0x480388a3, 0x4a038805, 0xc0000000, 0x80000580, + 0x497b2807, 0x5c001000, 0x5c000800, 0x480b8808, + 0x48079040, 0x1c01f000, 0x4933c857, 0x4d900000, + 0x4dd00000, 0x4da40000, 0x4d140000, 0x0401fdee, + 0x4df00000, 0x0401fa6f, 0x59900004, 0x800001c0, + 0x04000011, 0x81300580, 0x0402000f, 0x59300004, + 0x84000520, 0x48026004, 0x0401ff51, 0x04020009, + 0x5c03e000, 0x04000dd6, 0x80000580, 0x5c022800, + 0x5c034800, 0x5c03a000, 0x5c032000, 0x1c01f000, + 0x0401fd0e, 0x42027000, 0x00000049, 0x59300004, + 0x84000520, 0x48026004, 0x8c00050c, 0x02020800, + 0x000207a1, 0x5c03e000, 0x04000dc5, 0x82000540, + 0x00000001, 0x5c022800, 0x5c034800, 0x5c03a000, + 0x5c032000, 0x1c01f000, 0x4933c857, 0x0401fdc6, + 0x4df00000, 0x598c000d, 0x80026540, 0x04000012, + 0x59300004, 0x84000520, 0x48026004, 0x0401ff8a, + 0x04000017, 0x0401fd26, 0x42027000, 0x00000013, + 0x59300004, 0x8c00050c, 0x02020800, 0x000207a1, + 0x5c03e000, 0x04000daa, 0x82000540, 0x00000001, + 0x1c01f000, 0x836c1580, 0x00000001, 0x040007f9, + 0x836c1580, 0x00000004, 0x040007f6, 0x42001000, + 0x00104148, 0x0201f800, 0x00105f90, 0x5c03e000, + 0x04000d9b, 0x80000580, 0x1c01f000, 0x4d300000, + 0x4d180000, 0x4d3c0000, 0x0401fd9f, 0x4df00000, + 0x4a0378e4, 0x0000000f, 0x0401f9ff, 0x417a3000, + 0x59926004, 0x813261c0, 0x04000010, 0x417a7800, + 0x0201f800, 0x001048d9, 0x0400000a, 0x59300c06, + 0x82040580, 0x00000003, 0x04000004, 0x82040580, + 0x00000006, 0x04020003, 0x42027800, 0x00000002, + 0x0201f800, 0x00108be3, 0x811a3000, 0x83180480, + 0x00000005, 0x040017eb, 0x42000800, 0x00000040, + 0x0201f800, 0x00101345, 0x4a0378e4, 0x0000000a, + 0x5c03e000, 0x04000d72, 0x5c027800, 0x5c023000, + 0x5c026000, 0x1c01f000, 0x4803c856, 0x4d300000, + 0x0401fd75, 0x4df00000, 0x59c80840, 0x82040540, + 0x00000010, 0x48039040, 0x59c41008, 0x82080500, + 0xffffff7f, 0x48038808, 0x4c040000, 0x4c080000, + 0x42001000, 0x00000003, 0x0401f9c2, 0x598e600d, + 0x813261c0, 0x04020f9d, 0x040009c7, 0x497b2807, + 0x0401f80a, 0x5c001000, 0x5c000800, 0x480b8808, + 0x84040d74, 0x48079040, 0x5c03e000, 0x04000d50, + 0x5c026000, 0x1c01f000, 0x4d380000, 0x4d180000, + 0x4d300000, 0x4d900000, 0x4dd00000, 0x4da40000, + 0x4d140000, 0x59c41004, 0x480bc857, 0x82080500, + 0x00003ff0, 0x04000025, 0x417a3000, 0x4c080000, + 0x0201f800, 0x00106062, 0x5c001000, 0x82080500, + 0x00000210, 0x04020004, 0x811a3000, 0x80081102, + 0x0401f7f7, 0x0401f9c3, 0x59926004, 0x4933c857, + 0x813261c0, 0x04020005, 0x59c400a3, 0x8c00051a, + 0x02000800, 0x001005d8, 0x0401fea5, 0x04000009, + 0x0401fc6a, 0x42027000, 0x00000049, 0x59300004, + 0x8c00050c, 0x02020800, 0x000207a1, 0x0401f007, + 0x42027000, 0x0000004a, 0x4a026203, 0x00000003, + 0x0201f800, 0x000207a1, 0x5c022800, 0x5c034800, + 0x5c03a000, 0x5c032000, 0x5c026000, 0x5c023000, + 0x5c027000, 0x1c01f000, 0x4d300000, 0x4d180000, + 0x4d900000, 0x0401fd1c, 0x42001000, 0x00000000, + 0x598c0000, 0x82000580, 0x00000005, 0x04000971, + 0x417a3000, 0x811b20c8, 0x83932400, 0x0000bf32, + 0x59900001, 0x82000580, 0x00000001, 0x0402000d, + 0x42000800, 0x000007d0, 0x59926004, 0x59300011, + 0x82000500, 0xfff00000, 0x80000540, 0x04000003, + 0x42000800, 0x00001b58, 0x0201f800, 0x00106054, + 0x811a3000, 0x83180480, 0x00000005, 0x040017ea, + 0x59c81040, 0x84081534, 0x480b9040, 0x0401fcf0, + 0x5c032000, 0x5c023000, 0x5c026000, 0x1c01f000, + 0x4933c857, 0x4d900000, 0x4dd00000, 0x4da40000, + 0x4d140000, 0x4d380000, 0x0401fcef, 0x4df00000, + 0x59300004, 0x8c00053e, 0x04020007, 0x8c000520, + 0x04000025, 0x0201f800, 0x00106b6c, 0x04000022, + 0x0401f02a, 0x598c000d, 0x81300580, 0x04000011, + 0x0201f800, 0x00108cd6, 0x04020024, 0x0401f918, + 0x04000022, 0x48038804, 0x0401f95e, 0x0201f800, + 0x0010107a, 0x0401fc0d, 0x42027000, 0x00000049, + 0x59300004, 0x8c00050c, 0x0402000d, 0x0401f00e, + 0x59c40004, 0x8c000504, 0x04000014, 0x4a038804, + 0x00000004, 0x0401fc36, 0x42027000, 0x00000013, + 0x59300004, 0x8c00050c, 0x04000003, 0x0201f800, + 0x000207a1, 0x5c03e000, 0x04000cb9, 0x5c027000, + 0x5c022800, 0x5c034800, 0x5c03a000, 0x5c032000, + 0x80000580, 0x1c01f000, 0x5c03e000, 0x04000cb0, + 0x5c027000, 0x5c022800, 0x5c034800, 0x5c03a000, + 0x5c032000, 0x82000540, 0x00000001, 0x1c01f000, + 0x497b2807, 0x0401fcb0, 0x59c400af, 0x800001c0, + 0x04020004, 0x0401fca2, 0x0201f000, 0x001014fb, + 0x598c000f, 0x82001480, 0x00000002, 0x04021007, + 0x80000000, 0x4803180f, 0x80000580, 0x0201f800, + 0x0010604d, 0x0400000e, 0x0401fed8, 0x0402000c, + 0x0401fdd4, 0x0400000a, 0x0201f800, 0x0010a9c7, + 0x0401f916, 0x4d380000, 0x42027000, 0x00000014, + 0x0201f800, 0x000207a1, 0x5c027000, 0x0401fc88, + 0x0201f000, 0x001014fb, 0x4d900000, 0x4dd00000, + 0x4da40000, 0x4d140000, 0x4d300000, 0x0201f800, + 0x00106062, 0x0401fc88, 0x59c400af, 0x800001c0, + 0x04000027, 0x0401f907, 0x59926004, 0x4933c857, + 0x59300004, 0x8c000516, 0x0400000b, 0x0401fe8b, + 0x0402001f, 0x0201f800, 0x00106b8a, 0x0401fc70, + 0x42000800, 0x80000804, 0x0201f800, 0x00106721, + 0x0401f017, 0x42001800, 0x00007530, 0x0401f8c1, + 0x04020004, 0x0201f800, 0x00106052, 0x0401f010, + 0x0401fe7a, 0x0402000e, 0x0201f800, 0x0010a9c7, + 0x59300004, 0x8c00050c, 0x04020003, 0x4a026203, + 0x00000003, 0x4d380000, 0x42027000, 0x0000004a, + 0x0201f800, 0x000207a1, 0x5c027000, 0x0401fc54, + 0x5c026000, 0x5c022800, 0x5c034800, 0x5c03a000, + 0x5c032000, 0x0201f000, 0x001014fb, 0x4d900000, + 0x4dd00000, 0x4da40000, 0x4d140000, 0x4d300000, + 0x4d2c0000, 0x0401fc50, 0x0401f8d2, 0x59926004, + 0x4933c857, 0x0401f880, 0x04000016, 0x0201f800, + 0x00106062, 0x813261c0, 0x04000034, 0x59325808, + 0x812e59c0, 0x02000800, 0x001005d8, 0x0201f800, + 0x0010513b, 0x0402001d, 0x592c0208, 0x84000550, + 0x48025a08, 0x0201f800, 0x00105258, 0x04020027, + 0x592c0208, 0x84000510, 0x48025a08, 0x0401f023, + 0x0201f800, 0x00106052, 0x0401f020, 0x0201f800, + 0x0010a9c7, 0x0401fd9e, 0x592c0208, 0x84000550, + 0x48025a08, 0x4d380000, 0x42027000, 0x0000004a, + 0x4a026203, 0x00000003, 0x0201f800, 0x000207a1, + 0x5c027000, 0x0401f011, 0x59900006, 0x82000500, + 0xffff0000, 0x040207ee, 0x59c408af, 0x82040480, + 0x000003e8, 0x040217ea, 0x59900006, 0x82000400, + 0x00010000, 0x48032006, 0x0201f800, 0x00106052, + 0x0201f800, 0x0010411d, 0x5c025800, 0x5c026000, + 0x5c022800, 0x5c034800, 0x5c03a000, 0x5c032000, + 0x0401f403, 0x4d300000, 0x4d2c0000, 0x0401fc0a, + 0x598e600d, 0x4933c857, 0x59c41004, 0x8c081500, + 0x04000007, 0x0201f800, 0x0010513b, 0x04020007, + 0x0201f800, 0x00105258, 0x0402002f, 0x0201f800, + 0x0010604d, 0x0401f02c, 0x598c000f, 0x80000540, + 0x04020011, 0x59c408af, 0x82040480, 0x000003e8, + 0x0402100d, 0x598c080f, 0x80040800, 0x4807180f, + 0x0201f800, 0x0010604d, 0x42000000, 0x0010b852, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x0010411d, + 0x0401f019, 0x0401fdb4, 0x813261c0, 0x04020003, + 0x0401f849, 0x0401f014, 0x0201f800, 0x0010a9c7, + 0x59300406, 0x82000580, 0x00000003, 0x04020007, + 0x59325808, 0x812e59c0, 0x04000004, 0x592c0208, + 0x84000550, 0x48025a08, 0x0401f854, 0x4d380000, + 0x42027000, 0x00000014, 0x0201f800, 0x000207a1, + 0x5c027000, 0x5c025800, 0x5c026000, 0x0201f000, + 0x00106c4b, 0x59c40804, 0x83180400, 0x00107095, + 0x50000000, 0x80040500, 0x1c01f000, 0x59c40804, + 0x83180400, 0x0010709a, 0x50000000, 0x80040500, + 0x1c01f000, 0x00000210, 0x00000420, 0x00000840, + 0x00001080, 0x00002100, 0x00004000, 0x00008000, + 0x00010000, 0x00020000, 0x00040000, 0x00080000, + 0x00100000, 0x00200000, 0x00400000, 0x00800000, + 0x59900806, 0x80040120, 0x800c0480, 0x04021004, + 0x82000540, 0x00000001, 0x0401f005, 0x82040c00, + 0x00010000, 0x48072006, 0x80000580, 0x1c01f000, + 0x480bc857, 0x0201f800, 0x00106c55, 0x4df00000, + 0x480b1800, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x1c01f000, 0x4803c856, 0x0201f800, 0x00106c55, + 0x4df00000, 0x497b180d, 0x497b1803, 0x497b180e, + 0x497b180f, 0x497b1810, 0x598c0000, 0x82000580, + 0x00000003, 0x04000009, 0x836c0580, 0x00000002, + 0x04020004, 0x4a031800, 0x00000005, 0x0401f003, + 0x4a031800, 0x00000000, 0x5c03e000, 0x02000800, + 0x00106c4b, 0x1c01f000, 0x59300004, 0x8c00050c, + 0x04020003, 0x4a026203, 0x00000001, 0x1c01f000, + 0x83180480, 0x00000005, 0x02021800, 0x001005d8, + 0x491bc857, 0x811b20c8, 0x83932400, 0x0000bf32, + 0x811ba0ca, 0x83d3a400, 0x00007600, 0x83180400, + 0x001070ea, 0x50034800, 0x811a28c2, 0x83162c00, + 0x00006100, 0x1c01f000, 0x0010b75b, 0x0010b772, + 0x0010b789, 0x0010b7a0, 0x0010b7b7, 0x4933c857, + 0x59300406, 0x82000c80, 0x00000012, 0x04021016, + 0x4803c857, 0x04011000, 0x0c01f001, 0x00107109, + 0x00107198, 0x001074d1, 0x00107556, 0x00107198, + 0x001074d1, 0x00107556, 0x00107109, 0x00107198, + 0x00107109, 0x00107109, 0x00107109, 0x00107109, + 0x00107109, 0x00107109, 0x00107109, 0x0010710f, + 0x0010710f, 0x0201f800, 0x00106c55, 0x0201f800, + 0x00106bbf, 0x0201f000, 0x00106c4b, 0x42001000, + 0x0010b7f6, 0x50081000, 0x4930100c, 0x58080002, + 0x82000580, 0x00000100, 0x04020032, 0x59325808, + 0x812e59c0, 0x02000800, 0x001005d8, 0x59326809, + 0x813669c0, 0x04000019, 0x592c040b, 0x82000500, + 0x0000e000, 0x04000003, 0x0401fba8, 0x0401f002, + 0x0401fb98, 0x42001000, 0x0010b7f6, 0x50081000, + 0x4930100b, 0x492c100a, 0x82d00400, 0x00000006, + 0x48001003, 0x592c000d, 0x80000104, 0x48001004, + 0x592c000e, 0x48001007, 0x592c000f, 0x48001008, + 0x0201f000, 0x00100858, 0x42026800, 0x0010be0d, + 0x592c080a, 0x48066802, 0x82040500, 0x00ffff00, + 0x04000007, 0x497a6a12, 0x59a81010, 0x82081500, + 0x00ffff00, 0x80080580, 0x040207dc, 0x82040d00, + 0x000000ff, 0x800408d0, 0x48066a12, 0x0401f7d7, + 0x1c01f000, 0x4d2c0000, 0x4d300000, 0x4c580000, + 0x4c540000, 0x4c500000, 0x5832580a, 0x812e59c0, + 0x02000800, 0x001005d8, 0x58300002, 0x4a006002, + 0x00000100, 0x82000580, 0x00000100, 0x0402001c, + 0x5830000b, 0x5832600c, 0x81300580, 0x04020010, + 0x0401f828, 0x04020010, 0x592c080d, 0x80040904, + 0x4004b000, 0x4200a000, 0x0010b54b, 0x4050a800, + 0x0201f800, 0x0010ab28, 0x42001000, 0x0000dc00, + 0x0201f800, 0x001078bc, 0x0401f003, 0x0401f819, + 0x04000fa3, 0x5c00a000, 0x5c00a800, 0x5c00b000, + 0x5c026000, 0x5c025800, 0x1c01f000, 0x5830000b, + 0x5832600c, 0x81300580, 0x040207f5, 0x0401f80d, + 0x040207f5, 0x0201f800, 0x001068d3, 0x02020800, + 0x001005d8, 0x4a025a06, 0x00000002, 0x0201f800, + 0x000202da, 0x0201f800, 0x00107911, 0x0401f7ea, + 0x0201f800, 0x00106c55, 0x4df00000, 0x598c000d, + 0x81300580, 0x04020009, 0x598c0005, 0x81300580, + 0x04020006, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x80000580, 0x1c01f000, 0x5c03e000, 0x02000800, + 0x00106c4b, 0x82000540, 0x00000001, 0x1c01f000, + 0x59300403, 0x82000c80, 0x00000056, 0x02021800, + 0x001005d8, 0x4803c857, 0x0c01f001, 0x00107302, + 0x0010731d, 0x0010732e, 0x00107431, 0x001073f1, + 0x001073f5, 0x00107406, 0x0010741a, 0x0010740f, + 0x0010741a, 0x00107455, 0x0010741a, 0x00107497, + 0x0010741a, 0x001074a5, 0x0010741a, 0x0010740f, + 0x0010741a, 0x001074a9, 0x001071f5, 0x001071f5, + 0x001071f5, 0x001071f5, 0x001071f5, 0x001071f5, + 0x001071f5, 0x001071f5, 0x001071f5, 0x001071f5, + 0x001071f5, 0x00107574, 0x00107593, 0x0010759d, + 0x001071f5, 0x001075b3, 0x00107406, 0x001071f5, + 0x00107406, 0x0010741a, 0x001071f5, 0x0010732e, + 0x00107431, 0x001071f5, 0x00107603, 0x0010741a, + 0x001071f5, 0x00107613, 0x0010741a, 0x001071f5, + 0x0010740f, 0x001072f3, 0x001071f7, 0x001071f5, + 0x0010762a, 0x0010765d, 0x001076d7, 0x001071f5, + 0x001076e7, 0x00107404, 0x001076da, 0x001071f5, + 0x001075bf, 0x00107700, 0x001071f5, 0x00107735, + 0x00107788, 0x001071f5, 0x0010720c, 0x00107265, + 0x00107272, 0x001071f5, 0x00107406, 0x001071f5, + 0x001072b9, 0x001072c4, 0x001071f5, 0x001071f5, + 0x00107220, 0x00107245, 0x001077c7, 0x00107808, + 0x0010782e, 0x001071f5, 0x001071f5, 0x001071f5, + 0x001077fc, 0x0201f800, 0x001005d8, 0x0401fac5, + 0x59325808, 0x592c0009, 0x4801a006, 0x592c000a, + 0x4801a007, 0x592c000b, 0x4801a008, 0x592c000c, + 0x4801a009, 0x592c000d, 0x4801a00a, 0x4979a00b, + 0x592c0809, 0x82040d00, 0x00000fff, 0x80040904, + 0x42001000, 0x0000dc00, 0x0201f000, 0x001078bc, + 0x4a026202, 0x0000ffff, 0x0401faae, 0x4d2c0000, + 0x4a01a006, 0x05000000, 0x59325808, 0x592c0009, + 0x4801a007, 0x592c000a, 0x4801a008, 0x592c000b, + 0x4801a009, 0x42000800, 0x00000004, 0x42001000, + 0x0000dc00, 0x5c025800, 0x0201f000, 0x001078bc, + 0x4c580000, 0x4c500000, 0x4c540000, 0x4d2c0000, + 0x0401fa98, 0x59325808, 0x5930040b, 0x800000c2, + 0x4200a800, 0x0010b54b, 0x592cb205, 0x832ca400, + 0x00000006, 0x0201f800, 0x0010ab17, 0x40580000, + 0x8054ac00, 0x592c0001, 0x80000540, 0x04000003, + 0x40025800, 0x0401f7f5, 0x4200a000, 0x0010b54b, + 0x4050a800, 0x5930b40b, 0x0201f800, 0x0010ab28, + 0x59300c0b, 0x42001000, 0x0000dc00, 0x5c025800, + 0x5c00a800, 0x5c00b000, 0x5c00a000, 0x0201f000, + 0x001078bc, 0x4c580000, 0x4c500000, 0x4c540000, + 0x4d2c0000, 0x42034800, 0x0010b544, 0x0401fa7f, + 0x59325808, 0x4a025805, 0x02000000, 0x592c0802, + 0x82d0ac00, 0x00000006, 0x592cb011, 0x832ca400, + 0x00000005, 0x0201f800, 0x0010ab17, 0x40580000, + 0x8054ac00, 0x592e5801, 0x41780000, 0x812e5d40, + 0x040207f6, 0x42001000, 0x0000dc00, 0x5c025800, + 0x5c00a800, 0x5c00b000, 0x5c00a000, 0x0201f000, + 0x001078bc, 0x0401fa57, 0x4a01a006, 0x78000000, + 0x5930001c, 0x840001c0, 0x4801a407, 0x4979a207, + 0x42000800, 0x00000002, 0x42001000, 0x0000dc00, + 0x0201f000, 0x001078bc, 0x4c580000, 0x4c540000, + 0x4c500000, 0x0401fa55, 0x4a01a006, 0x02000000, + 0x59a80002, 0x4801a008, 0x59a80003, 0x4801a009, + 0x59a80000, 0x4801a00a, 0x59a80001, 0x4801a00b, + 0x5930001c, 0x82000d80, 0x0000e000, 0x04000016, + 0x82000d80, 0x0000df00, 0x04000006, 0x4a01a407, + 0x00000010, 0x42000800, 0x00000006, 0x0401f027, + 0x4a03c840, 0x0010b4eb, 0x4a03c842, 0x0000000d, + 0x42001800, 0x0010b4eb, 0x0201f800, 0x001007af, + 0x42000000, 0x0000df00, 0x4200a000, 0x0010b4eb, + 0x0401f00d, 0x4a03c840, 0x0010b4f8, 0x4a03c842, + 0x0000000d, 0x42001800, 0x0010b4f8, 0x0201f800, + 0x001007af, 0x42000000, 0x0000e000, 0x4200a000, + 0x0010b4f8, 0x82000540, 0x00000010, 0x4801a407, + 0x4a01a207, 0x00000034, 0x4200b000, 0x0000000d, + 0x82d0ac00, 0x0000000c, 0x0201f800, 0x0010ab17, + 0x42000800, 0x00000013, 0x42001000, 0x0000dc00, + 0x5c00a000, 0x5c00a800, 0x5c00b000, 0x0201f000, + 0x001078bc, 0x0401fa03, 0x4a01a006, 0x63000028, + 0x5930001c, 0x4801a007, 0x42000800, 0x00000002, + 0x42001000, 0x0000dc00, 0x0201f000, 0x001078bc, + 0x0401fa06, 0x41780000, 0x41780800, 0x42002000, + 0x00080000, 0x0c01f81b, 0x80000000, 0x80040800, + 0x42001000, 0x0000000c, 0x59841802, 0x8c0c1d00, + 0x04020008, 0x42002000, 0x00050000, 0x0c01f811, + 0x80000000, 0x80040800, 0x82081400, 0x00000004, + 0x82080540, 0x02000000, 0x4801a006, 0x800408e0, + 0x5930001c, 0x80040540, 0x4801a007, 0x80080904, + 0x42001000, 0x0000dc00, 0x0201f000, 0x001078bc, + 0x001072e9, 0x001072eb, 0x001072ed, 0x001072ef, + 0x001072f1, 0x4811a008, 0x1c01f000, 0x4811a009, + 0x1c01f000, 0x4811a00a, 0x1c01f000, 0x4811a00b, + 0x1c01f000, 0x4811a00c, 0x1c01f000, 0x4a026009, + 0x0010be0d, 0x59a80010, 0x82000500, 0x000000ff, + 0x800000d0, 0x42026800, 0x0010be0d, 0x48026a12, + 0x0401fa3b, 0x41780800, 0x42001000, 0x00005c00, + 0x0201f000, 0x001078bc, 0x0401f9ba, 0x4a01a006, + 0x52000000, 0x4979a007, 0x599c0017, 0x8c000500, + 0x04000005, 0x599c0402, 0x0201f800, 0x001015da, + 0x4805a007, 0x59a80002, 0x4801a008, 0x59a80003, + 0x4801a009, 0x59a80000, 0x4801a00a, 0x59a80001, + 0x4801a00b, 0x59a80010, 0x4801a00c, 0x42000800, + 0x00000007, 0x42001000, 0x0000dc00, 0x0201f000, + 0x001078bc, 0x4a026202, 0x0000ffff, 0x0401f99d, + 0x4a01a006, 0x05000000, 0x59a80010, 0x4801a007, + 0x59a80002, 0x59a80803, 0x4801a008, 0x4805a009, + 0x42000800, 0x00000004, 0x42001000, 0x0000dc00, + 0x0201f000, 0x001078bc, 0x4a026202, 0x0000ffff, + 0x0401f98c, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x001048f6, 0x5c027800, 0x4a01a006, 0x03000000, + 0x59340403, 0x82000580, 0x000007fe, 0x0402006e, + 0x4a01a006, 0x04000000, 0x81a40800, 0x4a000800, + 0x22fffffe, 0x5934000a, 0x84000500, 0x4802680a, + 0x59c41002, 0x8408150c, 0x480b8802, 0x59a80026, + 0x8c000508, 0x04000010, 0x59a8002a, 0x4801a007, + 0x59a8002b, 0x82000500, 0xffff2000, 0x599c0818, + 0x8c040d16, 0x04000002, 0x8400056a, 0x4801a008, + 0x4a01a009, 0x00002710, 0x59a8002d, 0x4801a00a, + 0x0401f039, 0x59a8002a, 0x4801a007, 0x0201f800, + 0x0010513b, 0x04020009, 0x497b8880, 0x82000500, + 0x0000ffff, 0x4c000000, 0x0201f800, 0x00101606, + 0x5c000000, 0x48038880, 0x59a8002b, 0x0201f800, + 0x0010513b, 0x04020004, 0x82000500, 0x37ffffff, + 0x0401f003, 0x82000500, 0x3fffffff, 0x599c0818, + 0x8c040d16, 0x04000002, 0x8400056a, 0x59a80805, + 0x8c040d10, 0x04000019, 0x59300c03, 0x82041580, + 0x00000051, 0x04000015, 0x82041580, 0x00000031, + 0x04000012, 0x4c580000, 0x4c500000, 0x4c540000, + 0x4200b000, 0x00000004, 0x4200a000, 0x0010b8fa, + 0x82d0ac00, 0x0000001f, 0x4c000000, 0x0201f800, + 0x0010ab17, 0x5c000000, 0x5c00a800, 0x5c00a000, + 0x5c00b000, 0x8400057a, 0x4801a008, 0x4979a009, + 0x4979a00a, 0x59a80002, 0x59a80803, 0x4801a00b, + 0x4805a00c, 0x59a80000, 0x59a80801, 0x4801a00d, + 0x4805a00e, 0x4979a00f, 0x4979a010, 0x4979a011, + 0x4979a012, 0x4979a013, 0x4979a014, 0x4979a015, + 0x4979a016, 0x59a8002e, 0x84000576, 0x4801a017, + 0x59a8002f, 0x4801a018, 0x4979a019, 0x4979a01a, + 0x0401f043, 0x59a80026, 0x8c000508, 0x0400000d, + 0x59a8002a, 0x82000500, 0x0000ffff, 0x59c40880, + 0x80040d80, 0x04000007, 0x497b8880, 0x4c000000, + 0x0201f800, 0x00101606, 0x5c000000, 0x48038880, + 0x59a8002a, 0x4801a007, 0x4c640000, 0x4d2c0000, + 0x59a8c82b, 0x0201f800, 0x00109037, 0x0400000d, + 0x0201f800, 0x00109597, 0x0402000a, 0x592c0207, + 0x8c00050e, 0x04000007, 0x8264cd00, 0x0000ffff, + 0x592c0009, 0x82000500, 0xffff0000, 0x8064cd40, + 0x4865a008, 0x5c025800, 0x5c00c800, 0x59a8002c, + 0x4801a009, 0x59a8002d, 0x4801a00a, 0x59a80002, + 0x59a80803, 0x4801a00b, 0x4805a00c, 0x59a80000, + 0x59a80801, 0x4801a00d, 0x4805a00e, 0x4979a00f, + 0x4979a010, 0x4979a011, 0x4979a012, 0x4979a013, + 0x4979a014, 0x4979a015, 0x4979a016, 0x59a8002e, + 0x4801a017, 0x59a8002f, 0x4801a018, 0x59a80030, + 0x4801a019, 0x59a80031, 0x4801a01a, 0x42000800, + 0x0000001d, 0x42001000, 0x0000dc00, 0x0201f000, + 0x001078bc, 0x0401f8cb, 0x4a01a006, 0x50000000, + 0x0401f7b5, 0x0401f8c7, 0x4a01a406, 0x21000010, + 0x4a01a206, 0x00000014, 0x4979a007, 0x4979a008, + 0x4979a009, 0x4979a00a, 0x42000800, 0x00000005, + 0x42001000, 0x0000dc00, 0x0201f000, 0x001078bc, + 0x0401f8bf, 0x0401f002, 0x0401f8c4, 0x4a01a006, + 0x02000000, 0x42000800, 0x00000001, 0x42001000, + 0x0000dc00, 0x0201f000, 0x001078bc, 0x0401f8bb, + 0x4a01a006, 0x02000000, 0x59300403, 0x82000580, + 0x00000031, 0x04020794, 0x81a40800, 0x4a000801, + 0x00fffffe, 0x0401f72b, 0x0401f8b0, 0x4a01a006, + 0x01000000, 0x5930041a, 0x80000540, 0x04000003, + 0x4801a407, 0x0401f003, 0x4a01a407, 0x00000003, + 0x5930021a, 0x80000540, 0x04000003, 0x4801a207, + 0x0401f003, 0x4a01a207, 0x00002a00, 0x42000800, + 0x00000002, 0x42001000, 0x0000dc00, 0x0201f000, + 0x001078bc, 0x4a026202, 0x0000ffff, 0x0401f889, + 0x4a01a406, 0x00002010, 0x4a01a206, 0x00000014, + 0x4a01a407, 0x00000800, 0x4a01a207, 0x00002000, + 0x80000580, 0x599c0817, 0x8c040d0a, 0x04020003, + 0x82000540, 0x00000020, 0x8c040d08, 0x04000003, + 0x82000540, 0x00000010, 0x82000540, 0x00000002, + 0x5934080a, 0x8c040d14, 0x04000005, 0x82040d00, + 0x00000380, 0x80040540, 0x0401f006, 0x599c0818, + 0x8c040d18, 0x04000003, 0x82000540, 0x00000380, + 0x0401f03c, 0x0401f875, 0x4a01a406, 0x00000210, + 0x4a01a206, 0x00000014, 0x4a01a407, 0x00000800, + 0x5934000a, 0x8c000516, 0x04000014, 0x59340c05, + 0x82040500, 0x00000030, 0x04000013, 0x59340a05, + 0x82040500, 0x0000c000, 0x04020009, 0x8c040d1a, + 0x04000004, 0x4a01a207, 0x00002100, 0x0401f00c, + 0x4a01a207, 0x00000100, 0x0401f009, 0x4a01a207, + 0x00000400, 0x0401f006, 0x4a01a207, 0x00000700, + 0x0401f003, 0x4a01a207, 0x00000800, 0x80000580, + 0x599c0817, 0x8c040d0a, 0x04020003, 0x82000540, + 0x00000020, 0x8c040d08, 0x04000003, 0x82000540, + 0x00000010, 0x82000540, 0x00000002, 0x59340a00, + 0x8c040d0e, 0x0400000b, 0x84000550, 0x599c1017, + 0x8c08150a, 0x04020004, 0x8c040d0a, 0x04000002, + 0x8400054e, 0x8c040d1c, 0x04000002, 0x84000552, + 0x4801a20a, 0x42000800, 0x00000005, 0x42001000, + 0x0000dc00, 0x0201f000, 0x001078bc, 0x0401f833, + 0x4a01a006, 0x02100014, 0x4a01a007, 0x01000000, + 0x4979a008, 0x4979a009, 0x4979a00a, 0x42000800, + 0x00000005, 0x42001000, 0x0000dc00, 0x0201f000, + 0x001078bc, 0x0401f825, 0x4a01a006, 0x02000000, + 0x0401f65d, 0x4933c857, 0x0401f820, 0x4a01a006, + 0x01000000, 0x4a01a407, 0x0000000b, 0x42000800, + 0x00000002, 0x42001000, 0x0000dc00, 0x0201f000, + 0x001078bc, 0x42005000, 0x32000000, 0x42006000, + 0x08290000, 0x41786800, 0x41787800, 0x0401f3df, + 0x42005000, 0x22000000, 0x42006000, 0x01290000, + 0x41786800, 0x41787800, 0x0401f3d8, 0x42005000, + 0x33000000, 0x42006000, 0x08980000, 0x41786800, + 0x41787800, 0x0401f3d1, 0x42005000, 0x23000000, + 0x42006000, 0x01980000, 0x41786800, 0x41787800, + 0x0401f3ca, 0x59300403, 0x82000c80, 0x00000085, + 0x02001800, 0x001005d8, 0x82000c80, 0x00000093, + 0x02021800, 0x001005d8, 0x82000480, 0x00000085, + 0x0c01f001, 0x001074eb, 0x001074ed, 0x001074fb, + 0x001074eb, 0x001074eb, 0x001074eb, 0x001074eb, + 0x001074eb, 0x001074eb, 0x001074eb, 0x001074eb, + 0x001074eb, 0x001074eb, 0x00107506, 0x0201f800, + 0x001005d8, 0x4933c857, 0x0401f850, 0x59300402, + 0x4801a407, 0x5930001c, 0x4801a207, 0x4979a408, + 0x4a01a208, 0x0000ffff, 0x42000800, 0x00000003, + 0x42001000, 0x0000dc00, 0x0401f3c2, 0x4933c857, + 0x0401f84e, 0x4a01a406, 0x00000003, 0x4a01a206, + 0x00000300, 0x42000800, 0x00000001, 0x42001000, + 0x0000dc00, 0x0401f3b7, 0x4d2c0000, 0x59325808, + 0x4933c857, 0x492fc857, 0x812e59c0, 0x02000800, + 0x001005d8, 0x59340a12, 0x82040d00, 0x0000ff00, + 0x592c000a, 0x82000500, 0x000000ff, 0x900001c0, + 0x80040540, 0x82000540, 0x00000011, 0x44034800, + 0x81a5a000, 0x42001000, 0x00000009, 0x42000800, + 0x00000003, 0x592c0009, 0x82000500, 0xff000000, + 0x82001d80, 0x84000000, 0x04000009, 0x82001d80, + 0x85000000, 0x02020800, 0x001005d8, 0x42001000, + 0x00000007, 0x42000800, 0x00000001, 0x832c1c00, + 0x00000009, 0x500c0000, 0x4401a000, 0x800c1800, + 0x80d1a000, 0x80081040, 0x040207fb, 0x42001000, + 0x0000dc00, 0x5c025800, 0x0401f386, 0x42005000, + 0x81000000, 0x42006000, 0x00090000, 0x41786800, + 0x41787800, 0x0401f35d, 0x42005000, 0x84000000, + 0x42006000, 0x00990000, 0x59300406, 0x82000580, + 0x00000005, 0x04000002, 0x8430652e, 0x41786800, + 0x41787800, 0x0401f351, 0x42005000, 0x85000000, + 0x42006000, 0x00990000, 0x59300406, 0x82000580, + 0x00000005, 0x04000002, 0x8430652e, 0x41786800, + 0x41787800, 0x0401f345, 0x59300403, 0x82000c80, + 0x00000053, 0x02021800, 0x001005d8, 0x82000480, + 0x0000004b, 0x02001800, 0x001005d8, 0x59326809, + 0x59368c03, 0x4803c857, 0x0c01f001, 0x001075da, + 0x001075e2, 0x001075ea, 0x001075f2, 0x0010756b, + 0x0010756b, 0x0010756b, 0x001075d2, 0x0201f800, + 0x001005d8, 0x42005000, 0x06000000, 0x42006000, + 0x08290000, 0x41786800, 0x41787800, 0x0401f327, + 0x4933c857, 0x0401ff47, 0x4a01a006, 0x12000000, + 0x59300406, 0x82000580, 0x00000004, 0x04020003, + 0x59340002, 0x0401f002, 0x59a80010, 0x82000500, + 0x00ffffff, 0x4801a007, 0x59300419, 0x4801a408, + 0x59300219, 0x4801a208, 0x4979a009, 0x4979a00a, + 0x4979a00b, 0x4979a00c, 0x4979a00d, 0x4979a00e, + 0x4979a00f, 0x4979a010, 0x42000800, 0x0000000b, + 0x42001000, 0x0000dc00, 0x0401f32a, 0x0401ff29, + 0x4a01a006, 0x0f000000, 0x5930001c, 0x4801a007, + 0x42000800, 0x00000002, 0x42001000, 0x0000dc00, + 0x0401f320, 0x0401ff2d, 0x4a01a006, 0x02000000, + 0x59c40085, 0x48031004, 0x59880000, 0x4801a007, + 0x59880001, 0x4801a008, 0x59880002, 0x4801a009, + 0x59880003, 0x4801a00a, 0x59880004, 0x4801a00b, + 0x59880005, 0x4801a00c, 0x42000800, 0x00000007, + 0x42001000, 0x0000dc00, 0x0401f30a, 0x4a026202, + 0x0000ffff, 0x0401ff07, 0x4a01a006, 0x62000000, + 0x5930001c, 0x4801a007, 0x42000800, 0x00000002, + 0x42001000, 0x0000dc00, 0x0401f2fe, 0x0401fefd, + 0x59300808, 0x4c500000, 0x4c540000, 0x4c580000, + 0x8204a400, 0x0000000a, 0x5930b01c, 0x82d0ac00, + 0x00000006, 0x0201f800, 0x0010ab17, 0x5930081c, + 0x42001000, 0x0000dc00, 0x5c00b000, 0x5c00a800, + 0x5c00a000, 0x0401f2eb, 0x0401ff9b, 0x59300017, + 0x4801a006, 0x59300018, 0x4801a007, 0x4a01a008, + 0x00001000, 0x0401f020, 0x0401ff93, 0x59300017, + 0x4801a006, 0x59300018, 0x4801a007, 0x4a01a008, + 0x00004000, 0x0401f018, 0x0401ff8b, 0x59300017, + 0x4801a006, 0x59300018, 0x4801a007, 0x4a01a008, + 0x00002000, 0x0401f010, 0x0401ff83, 0x59300017, + 0x4801a006, 0x59300018, 0x4801a007, 0x4a01a008, + 0x00000400, 0x0401f008, 0x0401ff7b, 0x59300017, + 0x4801a006, 0x59300018, 0x4801a007, 0x4a01a008, + 0x00000200, 0x4979a009, 0x4979a00a, 0x4979a00b, + 0x4979a00c, 0x4979a00d, 0x42000800, 0x00000008, + 0x42001000, 0x0000dc00, 0x0401f2ba, 0x0401fec7, + 0x4a01a006, 0x02000014, 0x4979a407, 0x4979a207, + 0x59a8003a, 0x4801a008, 0x59a8003b, 0x4801a009, + 0x4a01a00a, 0x00047878, 0x42000800, 0x00000005, + 0x42001000, 0x0000dc00, 0x0401f2aa, 0x0401feb7, + 0x4a01a006, 0x02140018, 0x4a01a407, 0x00000800, + 0x5930001c, 0x82000d00, 0xff000000, 0x900409c0, + 0x4805a207, 0x82000500, 0x00ffffff, 0x4801a00a, + 0x4979a408, 0x4979a208, 0x4979a409, 0x4979a209, + 0x4979a00b, 0x42000800, 0x00000006, 0x42001000, + 0x0000dc00, 0x0401f293, 0x4803c856, 0x4d380000, + 0x4d1c0000, 0x42027000, 0x00000035, 0x0201f800, + 0x001093ba, 0x0402001e, 0x0401fe8a, 0x4a01a006, + 0x13000000, 0x5932381e, 0x591c0019, 0x4801a005, + 0x591c0406, 0x82000580, 0x00000003, 0x04000007, + 0x59300809, 0x58040002, 0x82000500, 0x00ffffff, + 0x4801a007, 0x0401f003, 0x59a80010, 0x4801a007, + 0x59300419, 0x4801a408, 0x59300219, 0x4801a208, + 0x42000800, 0x00000003, 0x42001000, 0x0000dc00, + 0x5c023800, 0x5c027000, 0x0401f26e, 0x0201f800, + 0x00106c55, 0x598c000d, 0x81300580, 0x02020800, + 0x001005d8, 0x0201f800, 0x00106bbf, 0x0201f800, + 0x0002077d, 0x5c023800, 0x5c027000, 0x0201f000, + 0x00106c4b, 0x4803c856, 0x4d2c0000, 0x4d1c0000, + 0x5932381e, 0x811e39c0, 0x02000800, 0x001005d8, + 0x591c0c06, 0x82040580, 0x00000006, 0x0400000d, + 0x82040580, 0x00000003, 0x04000036, 0x4a026403, + 0x00000037, 0x4a02641a, 0x00000003, 0x4a02621a, + 0x00001700, 0x5c023800, 0x5c025800, 0x0401f064, + 0x0401f84b, 0x42001000, 0x40000000, 0x591c0203, + 0x591c0804, 0x8c040d3e, 0x04020023, 0x82000c80, + 0x0000000e, 0x0c001003, 0x0201f800, 0x001005d8, + 0x00107691, 0x0010769d, 0x00107693, 0x0010769d, + 0x00107699, 0x00107691, 0x00107691, 0x0010769d, + 0x0010769d, 0x00107691, 0x00107691, 0x00107691, + 0x00107691, 0x00107691, 0x0010769d, 0x00107691, + 0x0010769d, 0x0201f800, 0x001005d8, 0x591c0414, + 0x4803c857, 0x8c000518, 0x04000003, 0x8c000512, + 0x04000003, 0x80001580, 0x0401f003, 0x42001000, + 0x20000000, 0x591c0015, 0x4801a00a, 0x0401f018, + 0x0401f81f, 0x591e5808, 0x812e59c0, 0x02000800, + 0x001005d8, 0x592c100f, 0x591c0011, 0x80080480, + 0x4801a00a, 0x591c0203, 0x591c0804, 0x8c040d3e, + 0x04020007, 0x82000d80, 0x00000002, 0x04000007, + 0x82000d80, 0x00000004, 0x04000004, 0x42001000, + 0x40000000, 0x0401f002, 0x80001580, 0x4809a00b, + 0x42000800, 0x00000006, 0x42001000, 0x0000dc00, + 0x5c023800, 0x5c025800, 0x0401f1fe, 0x4803c856, + 0x0401fe0a, 0x4a01a006, 0x02000000, 0x59300c19, + 0x4805a407, 0x59300a19, 0x4805a207, 0x59a81010, + 0x59300809, 0x58041802, 0x820c1d00, 0x00ffffff, + 0x5930081e, 0x58040406, 0x82000580, 0x00000003, + 0x04020004, 0x4809a008, 0x480da009, 0x0401f003, + 0x480da008, 0x4809a009, 0x1c01f000, 0x4803c856, + 0x0401fdf2, 0x0401f003, 0x4803c856, 0x0401fde8, + 0x4a01a006, 0x01000000, 0x5930041a, 0x4801a407, + 0x5930021a, 0x4801a207, 0x42000800, 0x00000002, + 0x42001000, 0x0000dc00, 0x0401f1d6, 0x4803c856, + 0x4d1c0000, 0x0401fdcc, 0x4a01a006, 0x14000000, + 0x5932381e, 0x591c0019, 0x4801a005, 0x59300419, + 0x4801a407, 0x59300219, 0x4801a207, 0x59300015, + 0x4801a008, 0x59300216, 0x82000500, 0x000000ff, + 0x840001c0, 0x4801a409, 0x42000800, 0x00000004, + 0x42001000, 0x0000dc00, 0x5c023800, 0x0401f1bd, + 0x4803c856, 0x0401f80b, 0x5930041a, 0x900001c0, + 0x4801a005, 0x0401f9ec, 0x41780800, 0x42001000, + 0x00005c00, 0x0401f9b3, 0x0201f000, 0x0010604d, + 0x4803c856, 0x59300817, 0x82041c00, 0x00000005, + 0x46034800, 0x00000021, 0x58040404, 0x82000500, + 0x0000f000, 0x82000580, 0x00003000, 0x04000003, + 0x46034800, 0x00000041, 0x81a5a000, 0x580c0001, + 0x82000d00, 0x00ffffff, 0x82040d40, 0xc2000000, + 0x4805a000, 0x580c0800, 0x82041500, 0x00ffffff, + 0x82000500, 0xff000000, 0x80080540, 0x4801a001, + 0x580c0002, 0x82000580, 0x00c00000, 0x82000500, + 0x00fd0300, 0x4801a002, 0x580c0003, 0x4801a003, + 0x580c0404, 0x4801a404, 0x580c0204, 0x4801a204, + 0x1c01f000, 0x4803c856, 0x59a80026, 0x82000500, + 0x00000028, 0x04020009, 0x59a80026, 0x82000500, + 0x00000028, 0x04000003, 0x497a6a12, 0x0401f003, + 0x4a026a12, 0x0000ff00, 0x42005000, 0x22000000, + 0x42006000, 0x01380000, 0x41786800, 0x41787800, + 0x0401f952, 0x59301008, 0x4a01a006, 0x54000000, + 0x59a80010, 0x82000500, 0x00ffffff, 0x58080c0a, + 0x800408f0, 0x80040540, 0x4801a007, 0x5808000a, + 0x82000500, 0xff000000, 0x4801a008, 0x59a80002, + 0x4801a009, 0x59a80003, 0x4801a00a, 0x59a80000, + 0x4801a00b, 0x59a80001, 0x4801a00c, 0x5808000c, + 0x9c0001c0, 0x4801a00d, 0x5808000d, 0x9c0001c0, + 0x4801a00e, 0x5808000e, 0x9c0001c0, 0x4801a00f, + 0x5808000f, 0x9c0001c0, 0x4801a010, 0x58080010, + 0x9c0001c0, 0x4801a011, 0x58080011, 0x9c0001c0, + 0x4801a012, 0x58080012, 0x9c0001c0, 0x4801a013, + 0x58080013, 0x9c0001c0, 0x4801a014, 0x58080010, + 0x9c0001c0, 0x4801a015, 0x58080011, 0x9c0001c0, + 0x4801a016, 0x58080012, 0x9c0001c0, 0x4801a017, + 0x58080013, 0x9c0001c0, 0x4801a018, 0x42000800, + 0x00000013, 0x42001000, 0x0000dc00, 0x0401f135, + 0x4803c856, 0x42005000, 0x22000000, 0x42006000, + 0x01290000, 0x41786800, 0x41787800, 0x0401f90b, + 0x59301008, 0x4a01a006, 0x55000000, 0x5808000b, + 0x82000500, 0x00ffffff, 0x58080c0a, 0x800408f0, + 0x80040540, 0x4801a007, 0x5808080a, 0x82040d00, + 0xff000000, 0x59a80010, 0x82000500, 0x00ffffff, + 0x80040540, 0x4801a008, 0x5808000c, 0x9c0001c0, + 0x4801a009, 0x5808000d, 0x9c0001c0, 0x4801a00a, + 0x5808000e, 0x9c0001c0, 0x4801a00b, 0x5808000f, + 0x9c0001c0, 0x4801a00c, 0x59a80002, 0x4801a00d, + 0x59a80003, 0x4801a00e, 0x59a80000, 0x4801a00f, + 0x59a80001, 0x4801a010, 0x58080010, 0x4801a011, + 0x58080011, 0x4801a012, 0x58080012, 0x4801a013, + 0x58080013, 0x4801a014, 0x4979a015, 0x4979a016, + 0x4979a017, 0x4979a018, 0x42000800, 0x00000013, + 0x42001000, 0x0000dc00, 0x0401f0f6, 0x0401fd03, + 0x5930001c, 0x800001c0, 0x04000008, 0x4a01a006, + 0x01000000, 0x4a01a407, 0x00000003, 0x42000800, + 0x00000002, 0x0401f028, 0x4a01a006, 0x02000000, + 0x41780800, 0x836c0580, 0x00000004, 0x04020003, + 0x84040d42, 0x0401f00d, 0x0201f800, 0x0010513b, + 0x04020003, 0x84040d4a, 0x0401f002, 0x84040d48, + 0x59a80026, 0x8c000506, 0x04020003, 0x8c00050a, + 0x04000002, 0x84040d46, 0x4805a207, 0x59c40085, + 0x48031004, 0x4c580000, 0x4c500000, 0x4c540000, + 0x4200b000, 0x00000006, 0x8388a400, 0x00000000, + 0x82d0ac00, 0x00000008, 0x0201f800, 0x0010ab17, + 0x5c00a800, 0x5c00a000, 0x5c00b000, 0x42000800, + 0x00000008, 0x42001000, 0x0000dc00, 0x0401f0c1, + 0x0401fcc0, 0x4a01a006, 0x56000000, 0x59340006, + 0x4801a007, 0x59340007, 0x4801a008, 0x42000800, + 0x00000003, 0x42001000, 0x0000dc00, 0x0401f0b5, + 0x4803c856, 0x0401fcc1, 0x5930081c, 0x800409c0, + 0x0400000e, 0x82040580, 0x0000ffff, 0x04000004, + 0x82040480, 0x00000007, 0x04021008, 0x4a01a006, + 0x01000000, 0x4a01a407, 0x00000003, 0x42000800, + 0x00000002, 0x0401f012, 0x4a01a006, 0x0200001c, + 0x4a01a007, 0x00000001, 0x42001000, 0x0010b4f0, + 0x50080000, 0x9c0001c0, 0x4801a009, 0x59a80010, + 0x4801a00a, 0x59a80002, 0x59a80803, 0x4801a00b, + 0x4805a00c, 0x42000800, 0x00000007, 0x42001000, + 0x0000dc00, 0x0401f08f, 0x4d2c0000, 0x0401fc8d, + 0x59325808, 0x592c0008, 0x82000500, 0x00ffffff, + 0x4801a001, 0x4a01a006, 0x51000000, 0x5c025800, + 0x0201f000, 0x00107344, 0x4803c856, 0x59a80810, + 0x82040d00, 0x000000ff, 0x59325808, 0x59326809, + 0x59a83026, 0x8c18350a, 0x04020008, 0x8c00050e, + 0x04020006, 0x80001d80, 0x59a82010, 0x82102500, + 0x000000ff, 0x0401f001, 0x59300406, 0x4803c857, + 0x82000d80, 0x00000009, 0x04000006, 0x82000d80, + 0x0000000a, 0x0400002e, 0x0201f800, 0x001005d8, + 0x59300015, 0x8c00051e, 0x04020020, 0x42005000, + 0x04000000, 0x42006000, 0x05000000, 0x592c040a, + 0x82000500, 0x00000030, 0x800000e0, 0x80306540, + 0x5934000a, 0x8c000508, 0x04000002, 0x84306546, + 0x41786800, 0x41787800, 0x0401f831, 0x59300c14, + 0x80040000, 0x48026414, 0x40040000, 0x800000d0, + 0x82000540, 0x00000020, 0x4801a403, 0x83180d40, + 0x00000038, 0x42001000, 0x0000c920, 0x0401f860, + 0x0201f000, 0x00106052, 0x59a80026, 0x82000500, + 0x00000028, 0x04000003, 0x497a6a12, 0x0401f7dc, + 0x4a026a12, 0x0000ff00, 0x0401f7d9, 0x42005000, + 0x02000000, 0x42006000, 0x20290000, 0x41786800, + 0x41787800, 0x0401f812, 0x83180d40, 0x00000038, + 0x42001000, 0x0000c9a0, 0x0401f849, 0x42000800, + 0x000007d0, 0x59300011, 0x82000500, 0xfff00000, + 0x80000540, 0x04000003, 0x42000800, 0x00001b58, + 0x41781000, 0x0201f000, 0x00106054, 0x4201a000, + 0x00000000, 0x0401f003, 0x4201a000, 0x00000011, + 0x59340a12, 0x82040d00, 0x0000ff00, 0x59a80010, + 0x82000500, 0x000000ff, 0x900001c0, 0x80040540, + 0x80d00540, 0x44034800, 0x81a5a000, 0x59340002, + 0x82000500, 0x00ffffff, 0x80280540, 0x4801a000, + 0x59a80010, 0x4801a001, 0x4831a002, 0x82340540, + 0x00000000, 0x4801a003, 0x59300402, 0x4801a404, + 0x59300a02, 0x4805a204, 0x8c30652e, 0x04000003, + 0x4805a404, 0x4801a204, 0x483da005, 0x1c01f000, + 0x4803c856, 0x4c040000, 0x0401f822, 0x5c000800, + 0x40040000, 0x80081540, 0x800000c4, 0x82000540, + 0x00002000, 0x4803910a, 0x59b400f6, 0x82000500, + 0x00000018, 0x040207fd, 0x4a0368f0, 0x0010b544, + 0x4a0368f1, 0x0010b54b, 0x480b68f3, 0x4a0378e4, + 0x00008000, 0x0201f000, 0x0010604d, 0x4807c857, + 0x480a2800, 0x4c040000, 0x0401f80a, 0x5c000800, + 0x59b400f6, 0x8c00050a, 0x040207fe, 0x49a768f2, + 0x480768f4, 0x4a0378e4, 0x00008000, 0x1c01f000, + 0x4a0378e4, 0x0000c000, 0x59bc00e4, 0x8c000520, + 0x0400000c, 0x4a0378e4, 0x00008000, 0x42007000, + 0x000003e8, 0x59bc00e4, 0x8c000520, 0x040007f5, + 0x80387040, 0x02000800, 0x001005d8, 0x0401f7fa, + 0x1c01f000, 0x82000500, 0xffff0000, 0x82000580, + 0x01050000, 0x0402000d, 0x599c0818, 0x8c040d10, + 0x0400000a, 0x59a80807, 0x8c040d0a, 0x04000007, + 0x42001000, 0x0000804f, 0x41781800, 0x41782000, + 0x0201f800, 0x00103a3e, 0x1c01f000, 0x41781000, + 0x42026000, 0x0010d1c0, 0x59a8180e, 0x480a6402, + 0x4a026202, 0x0000ffff, 0x80081000, 0x800c1840, + 0x04000004, 0x83326400, 0x00000024, 0x0401f7f8, + 0x1c01f000, 0x4933c857, 0x59300203, 0x82000580, + 0x00000000, 0x0400002c, 0x59300406, 0x4803c857, + 0x82000d80, 0x00000004, 0x04000011, 0x82000d80, + 0x00000001, 0x0400000e, 0x82000d80, 0x00000003, + 0x04000006, 0x82000d80, 0x00000006, 0x04020011, + 0x0201f800, 0x0010a5df, 0x5930001c, 0x800001c0, + 0x02020800, 0x0010984e, 0x0401f00a, 0x5930081e, + 0x4807c857, 0x800409c0, 0x04000006, 0x5804001c, + 0x4803c857, 0x81300580, 0x04020002, 0x4978081c, + 0x497a6008, 0x4a026004, 0x00004000, 0x59a80037, + 0x82000c80, 0x00000051, 0x04001002, 0x80000102, + 0x48026206, 0x497a6205, 0x497a6009, 0x4a026406, + 0x00000007, 0x1c01f000, 0x8166c9c0, 0x0400001c, + 0x41626000, 0x41580000, 0x59300a03, 0x82040d80, + 0x00000000, 0x04000008, 0x83326400, 0x00000024, + 0x81300c80, 0x040017f9, 0x42026000, 0x0010d1c0, + 0x0401f7f6, 0x4933c857, 0x8166c840, 0x83300c00, + 0x00000024, 0x80040480, 0x04021006, 0x4006c000, + 0x4a026203, 0x00000008, 0x813261c0, 0x1c01f000, + 0x4202c000, 0x0010d1c0, 0x0401f7fa, 0x42000000, + 0x0010b854, 0x0201f800, 0x0010aa47, 0x4933c856, + 0x417a6000, 0x0401f7f5, 0x4933c857, 0x83380580, + 0x00000013, 0x0402000b, 0x59300004, 0x8c00053e, + 0x04000007, 0x0201f800, 0x00106c55, 0x0201f800, + 0x00106bbf, 0x0201f800, 0x00106c4b, 0x1c01f000, + 0x4933c857, 0x59880052, 0x80000000, 0x48031052, + 0x1c01f000, 0x4933c857, 0x59300203, 0x82003480, + 0x0000000e, 0x02021800, 0x001005d8, 0x4d2c0000, + 0x0c01f803, 0x5c025800, 0x1c01f000, 0x00107991, + 0x00107efd, 0x0010804a, 0x00107991, 0x001080b0, + 0x00107af5, 0x00107991, 0x00107991, 0x00107e93, + 0x00107991, 0x00107991, 0x00107991, 0x00107991, + 0x00107991, 0x0201f800, 0x001005d8, 0x4933c857, + 0x59300203, 0x82003480, 0x0000000e, 0x02021800, + 0x001005d8, 0x0c01f001, 0x001079a8, 0x00108a3d, + 0x001079a8, 0x001079a8, 0x001079a8, 0x001079a8, + 0x001079a8, 0x001079a8, 0x001089e5, 0x00108a58, + 0x00108ac6, 0x00108a58, 0x00108ac6, 0x001079a8, + 0x0201f800, 0x001005d8, 0x0201f800, 0x001005d8, + 0x4933c857, 0x4d2c0000, 0x59325808, 0x59300203, + 0x82003480, 0x0000000e, 0x02021800, 0x001005d8, + 0x0c01f803, 0x5c025800, 0x1c01f000, 0x001079c5, + 0x001079c5, 0x001079c5, 0x001079e1, 0x00107a2d, + 0x001079c5, 0x001079c5, 0x001079c5, 0x001079c7, + 0x001079c5, 0x001079c5, 0x001079c5, 0x001079c5, + 0x001079c5, 0x0201f800, 0x001005d8, 0x4933c857, + 0x83380580, 0x00000040, 0x02020800, 0x001005d8, + 0x4a026007, 0x00082000, 0x4a026203, 0x00000003, + 0x493a6403, 0x4a025c08, 0x00000001, 0x592c000d, + 0x48026011, 0x497a6013, 0x592c0208, 0x800000c2, + 0x800010c4, 0x80081400, 0x480a6206, 0x0201f800, + 0x00100f4e, 0x42000800, 0x80000060, 0x0201f000, + 0x00106721, 0x4933c857, 0x83380480, 0x00000050, + 0x02021800, 0x001005d8, 0x83380480, 0x00000049, + 0x02001800, 0x001005d8, 0x0c01f001, 0x001079f4, + 0x001079ff, 0x001079f2, 0x001079f2, 0x001079f2, + 0x001079f2, 0x00107a0a, 0x0201f800, 0x001005d8, + 0x4a026203, 0x00000004, 0x4a025c08, 0x00000002, + 0x592c0207, 0x48025c09, 0x592c0209, 0x48025a07, + 0x592c000c, 0x4802580d, 0x1c01f000, 0x0201f800, + 0x00106b8a, 0x0201f800, 0x00109037, 0x04000005, + 0x4a025a06, 0x00000006, 0x0201f800, 0x000202da, + 0x0201f000, 0x0002077d, 0x0201f800, 0x00106b8a, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x0010203c, + 0x5c027800, 0x42003000, 0x00000014, 0x41782800, + 0x42002000, 0x00000002, 0x4d400000, 0x4d440000, + 0x59368c03, 0x42028000, 0x00000029, 0x0201f800, + 0x0010985e, 0x5c028800, 0x5c028000, 0x42000000, + 0x0010b864, 0x0201f800, 0x0010aa47, 0x0201f800, + 0x00109037, 0x02000000, 0x0002077d, 0x4a025a06, + 0x00000029, 0x0201f800, 0x000202da, 0x0201f000, + 0x0002077d, 0x4933c857, 0x83380580, 0x00000048, + 0x04000005, 0x83380580, 0x00000053, 0x02020800, + 0x001005d8, 0x592c0206, 0x82000580, 0x00000007, + 0x04000009, 0x59300011, 0x80000540, 0x04000006, + 0x592c080c, 0x80040480, 0x4802580c, 0x4a025a06, + 0x00000015, 0x592c0206, 0x80000540, 0x04020003, + 0x4a025a06, 0x00000000, 0x0201f800, 0x000202da, + 0x0201f000, 0x0002077d, 0x4933c857, 0x4d2c0000, + 0x4c500000, 0x4c540000, 0x4c580000, 0x0201f800, + 0x001007e4, 0x02000800, 0x001005d8, 0x497a5a06, + 0x59c80017, 0x82000500, 0x0000f000, 0x48025c07, + 0x59a80816, 0x82040c00, 0x00000018, 0x48065a07, + 0x412c7800, 0x4d2c0000, 0x41cca000, 0x42002800, + 0x00000001, 0x42001000, 0x0000002c, 0x82040480, + 0x0000002d, 0x04021006, 0x832cac00, 0x00000009, + 0x0201f800, 0x00108b96, 0x0401f02e, 0x40043000, + 0x42000800, 0x0000002c, 0x832cac00, 0x00000009, + 0x0201f800, 0x00108b96, 0x82183480, 0x0000002c, + 0x0201f800, 0x001007e4, 0x0400001a, 0x80142800, + 0x4a025804, 0x00000110, 0x492c7801, 0x82180c80, + 0x0000003d, 0x04021007, 0x40180800, 0x832cac00, + 0x00000005, 0x0201f800, 0x00108b96, 0x0401f015, + 0x82081400, 0x0000003c, 0x82183480, 0x0000003c, + 0x42000800, 0x0000003c, 0x412c7800, 0x832cac00, + 0x00000005, 0x0201f800, 0x00108b96, 0x0401f7e5, + 0x5c025800, 0x592c0206, 0x8400055e, 0x48025a06, + 0x592c0407, 0x80080540, 0x48025c07, 0x0401f002, + 0x5c025800, 0x813669c0, 0x04000003, 0x59343403, + 0x0401f003, 0x42003000, 0x0000ffff, 0x49325808, + 0x481a5c06, 0x82100580, 0x00000054, 0x04020002, + 0x491e5813, 0x841401c0, 0x80100540, 0x48025804, + 0x592c0001, 0x497a5801, 0x4c000000, 0x0201f800, + 0x000202da, 0x5c025800, 0x812e59c0, 0x040207f9, + 0x5c00b000, 0x5c00a800, 0x5c00a000, 0x5c025800, + 0x1c01f000, 0x4803c856, 0x4c5c0000, 0x4d2c0000, + 0x4c500000, 0x4c540000, 0x4c580000, 0x412cb800, + 0x592c040b, 0x8c000516, 0x04000003, 0x41cca000, + 0x0401f003, 0x83cca400, 0x00000006, 0x4008b000, + 0x41781000, 0x82580480, 0x00000012, 0x04001004, + 0x4200b000, 0x00000012, 0x40001000, 0x4c080000, + 0x4d2c0000, 0x0201f800, 0x001007e4, 0x04000023, + 0x5c001800, 0x492c1801, 0x485a5800, 0x832cac00, + 0x00000002, 0x0201f800, 0x0010ab28, 0x585c040b, + 0x8c000500, 0x0400000e, 0x832c1400, 0x00000002, + 0x8c000516, 0x04000003, 0x82081400, 0x00000006, + 0x46001000, 0x00000001, 0x80081000, 0x46001000, + 0x00000900, 0x84000500, 0x4800bc0b, 0x5c001000, + 0x800811c0, 0x040207da, 0x82000540, 0x00000001, + 0x5c00b000, 0x5c00a800, 0x5c00a000, 0x5c025800, + 0x5c00b800, 0x1c01f000, 0x5c025800, 0x5c001000, + 0x0401f7f8, 0x4933c857, 0x83380d80, 0x00000015, + 0x04020003, 0x0201f000, 0x0002077d, 0x83380d80, + 0x00000016, 0x02020800, 0x001005d8, 0x0201f000, + 0x0002077d, 0x4933c857, 0x4d2c0000, 0x4c500000, + 0x4c540000, 0x4c580000, 0x59325808, 0x83cca400, + 0x00000006, 0x59cc1806, 0x820c0580, 0x01000000, + 0x04020004, 0x4200b000, 0x00000002, 0x0401f00f, + 0x4200b000, 0x00000008, 0x832cac00, 0x00000005, + 0x0201f800, 0x0010ab17, 0x8c0c1d00, 0x0400000b, + 0x4200b000, 0x00000008, 0x592e5801, 0x812e59c0, + 0x02000800, 0x001005d8, 0x832cac00, 0x00000005, + 0x0201f800, 0x0010ab17, 0x0401f816, 0x5c00b000, + 0x5c00a800, 0x5c00a000, 0x5c025800, 0x1c01f000, + 0x4933c857, 0x4c500000, 0x4c540000, 0x4c580000, + 0x83cca400, 0x00000006, 0x5930a808, 0x8254ac00, + 0x00000005, 0x4200b000, 0x00000007, 0x0201f800, + 0x0010ab17, 0x5c00b000, 0x5c00a800, 0x5c00a000, + 0x4933c857, 0x0201f800, 0x00109037, 0x02000000, + 0x0002077d, 0x4d2c0000, 0x0201f800, 0x00109597, + 0x0402000b, 0x41780800, 0x4d400000, 0x42028000, + 0x00000000, 0x0201f800, 0x0010943b, 0x5c028000, + 0x5c025800, 0x0201f000, 0x0002077d, 0x5931d821, + 0x58ef400b, 0x58ee580d, 0x4a025a04, 0x00000103, + 0x58ec0009, 0x0801f800, 0x5c025800, 0x0201f000, + 0x0002077d, 0x4933c857, 0x59cc1806, 0x820c0580, + 0x02000000, 0x04020014, 0x4a026802, 0x00fffffd, + 0x5934000a, 0x84000504, 0x4802680a, 0x59300808, + 0x800409c0, 0x02000000, 0x0002077d, 0x4a000a04, + 0x00000103, 0x480c0805, 0x5931d821, 0x58ef400b, + 0x58ee580d, 0x58ec0009, 0x0801f800, 0x0201f000, + 0x0002077d, 0x42000000, 0x0010b86c, 0x0201f800, + 0x0010aa47, 0x4c0c0000, 0x0401f804, 0x5c001800, + 0x040207eb, 0x1c01f000, 0x4933c857, 0x4d2c0000, + 0x59325808, 0x812e59c0, 0x04020009, 0x497a6206, + 0x497a6205, 0x4d380000, 0x42027000, 0x00000022, + 0x0401fb77, 0x5c027000, 0x80000580, 0x5c025800, + 0x1c01f000, 0x4933c857, 0x4d2c0000, 0x4c500000, + 0x4c540000, 0x4c580000, 0x59325808, 0x592e5801, + 0x832cac00, 0x00000005, 0x83cca400, 0x00000006, + 0x59c80817, 0x82040d00, 0x000003ff, 0x82041480, + 0x0000000f, 0x0400101b, 0x4200b000, 0x0000000f, + 0x0201f800, 0x0010ab17, 0x592e5801, 0x832cac00, + 0x00000005, 0x82080c80, 0x0000000f, 0x0400100d, + 0x4200b000, 0x0000000f, 0x0201f800, 0x0010ab17, + 0x592e5801, 0x832cac00, 0x00000005, 0x82041480, + 0x0000000f, 0x04001007, 0x42001000, 0x0000000f, + 0x4008b000, 0x0201f800, 0x0010ab17, 0x0401f004, + 0x4004b000, 0x0201f800, 0x0010ab17, 0x5931d821, + 0x58ef400b, 0x58ee580d, 0x4a025a04, 0x00000103, + 0x592e5801, 0x58ec0009, 0x0801f800, 0x0201f800, + 0x0002077d, 0x5c00b000, 0x5c00a800, 0x5c00a000, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x4d2c0000, + 0x4c500000, 0x4c540000, 0x4c580000, 0x59cc0006, + 0x82000d80, 0x01000000, 0x0400002c, 0x59cc0007, + 0x9000b1c0, 0x8258b500, 0x000000ff, 0x8058b104, + 0x8258b400, 0x00000002, 0x82580c80, 0x00000007, + 0x04001003, 0x4200b000, 0x00000006, 0x83cca400, + 0x00000006, 0x59301008, 0x800811c0, 0x02000800, + 0x001005d8, 0x8208ac00, 0x00000005, 0x0201f800, + 0x0010ab17, 0x82000d00, 0xff000000, 0x800409c0, + 0x04000019, 0x8200b500, 0x000000ff, 0x8058b104, + 0x82580c80, 0x0000000e, 0x04001003, 0x4200b000, + 0x0000000d, 0x58081001, 0x800811c0, 0x02000800, + 0x001005d8, 0x8208ac00, 0x00000005, 0x0201f800, + 0x0010ab17, 0x0401f008, 0x59301008, 0x800811c0, + 0x02000800, 0x001005d8, 0x48001005, 0x59cc0007, + 0x48001006, 0x0401ff3b, 0x5c00b000, 0x5c00a800, + 0x5c00a000, 0x5c025800, 0x1c01f000, 0x4933c857, + 0x42000800, 0x00000000, 0x59cc0006, 0x82000580, + 0x02000000, 0x04000003, 0x42000800, 0x00000001, + 0x4d2c0000, 0x59325808, 0x812e59c0, 0x02000800, + 0x001005d8, 0x48065a06, 0x0201f800, 0x000202da, + 0x5c025800, 0x0201f000, 0x0002077d, 0x4933c857, + 0x4d2c0000, 0x4c500000, 0x4c540000, 0x4c580000, + 0x4200b000, 0x00000002, 0x59cc0806, 0x82040580, + 0x01000000, 0x04000004, 0x8204b500, 0x0000ffff, + 0x8058b104, 0x83cca400, 0x00000006, 0x59300008, + 0x8200ac00, 0x00000005, 0x0201f800, 0x0010ab17, + 0x0401ff0c, 0x5c00b000, 0x5c00a800, 0x5c00a000, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x4803c857, + 0x4807c857, 0x480bc857, 0x480fc857, 0x4813c857, + 0x481bc857, 0x492fc857, 0x4d2c0000, 0x4c000000, + 0x0201f800, 0x001007d3, 0x5c000000, 0x0400000f, + 0x48025803, 0x5c000000, 0x4802580a, 0x4c000000, + 0x481a5801, 0x48125809, 0x48065804, 0x480a5807, + 0x480e5808, 0x412c1000, 0x0201f800, 0x00100858, + 0x82000540, 0x00000001, 0x5c025800, 0x1c01f000, + 0x4933c857, 0x4d1c0000, 0x59cc0001, 0x82000500, + 0x00ffffff, 0x59341002, 0x82081500, 0x00ffffff, + 0x80080580, 0x0402001f, 0x497a6205, 0x4d380000, + 0x42027000, 0x00000035, 0x0201f800, 0x001093ba, + 0x5c027000, 0x04020012, 0x591c001c, 0x800001c0, + 0x0400000f, 0x497a381c, 0x591c0414, 0x8c000502, + 0x02000800, 0x001005d8, 0x84000502, 0x48023c14, + 0x591c1406, 0x82080580, 0x00000003, 0x04000006, + 0x82080580, 0x00000006, 0x04000005, 0x0401fc9e, + 0x0401f004, 0x0401f805, 0x0401f002, 0x0401f8c0, + 0x5c023800, 0x1c01f000, 0x4d2c0000, 0x591e5808, + 0x4933c857, 0x491fc857, 0x493bc857, 0x492fc857, + 0x83380580, 0x00000015, 0x040000b3, 0x83380580, + 0x00000016, 0x040200ae, 0x4d300000, 0x411e6000, + 0x59cc0207, 0x4803c857, 0x82000d00, 0x0000ff00, + 0x82040580, 0x00001700, 0x04000004, 0x82040580, + 0x00000300, 0x0402005b, 0x591c0203, 0x4803c857, + 0x82000580, 0x0000000d, 0x0400003f, 0x812e59c0, + 0x0400009a, 0x591c0202, 0x4803c857, 0x82000580, + 0x0000ffff, 0x0402007e, 0x592c020a, 0x4803c857, + 0x82000500, 0x00000003, 0x82000580, 0x00000002, + 0x04020007, 0x592c080f, 0x591c0011, 0x4803c857, + 0x4807c857, 0x80040580, 0x04020071, 0x591c0414, + 0x4803c857, 0x8c000500, 0x0402006d, 0x41780800, + 0x591c1206, 0x42000000, 0x0000000a, 0x0201f800, + 0x001066a0, 0x592c0406, 0x4803c857, 0x800001c0, + 0x0400000c, 0x80080c80, 0x04001004, 0x02020800, + 0x001005d8, 0x80001040, 0x480a5c06, 0x800811c0, + 0x04020004, 0x0201f800, 0x00108d88, 0x0401f06b, + 0x0201f800, 0x0010912a, 0x591c0817, 0x591c0018, + 0x48065808, 0x48025809, 0x59300007, 0x8c000500, + 0x02020800, 0x00100e99, 0x497a3808, 0x0201f800, + 0x000201ba, 0x0402004a, 0x411e6000, 0x0401fc3e, + 0x0401f05a, 0x0401fc6d, 0x04000013, 0x49366009, + 0x4a026406, 0x00000003, 0x492e6008, 0x591c0817, + 0x591c1018, 0x48066017, 0x480a6018, 0x4d380000, + 0x591e7403, 0x4d300000, 0x411e6000, 0x0401fc2e, + 0x5c026000, 0x0201f800, 0x000207a1, 0x5c027000, + 0x0401f046, 0x59a80039, 0x48023a05, 0x0401f043, + 0x59cc0407, 0x82000580, 0x0000000b, 0x04020025, + 0x59340a00, 0x84040d0e, 0x48066a00, 0x592c0a04, + 0x82040d00, 0x000000ff, 0x82040d80, 0x00000014, + 0x04000003, 0x4a02621d, 0x00000003, 0x59300007, + 0x8c000500, 0x02020800, 0x00100e99, 0x4d400000, + 0x42028000, 0x00000003, 0x592c0a08, 0x0201f800, + 0x00104e70, 0x0201f800, 0x000202da, 0x5c028000, + 0x497a6008, 0x4a026403, 0x00000085, 0x4a026203, + 0x00000009, 0x4a026406, 0x00000002, 0x42000800, + 0x8000404b, 0x0201f800, 0x00020721, 0x0401f01b, + 0x59cc0207, 0x82000580, 0x00002a00, 0x04020004, + 0x59a80039, 0x48023a05, 0x0401f014, 0x812e59c0, + 0x02000800, 0x001005d8, 0x4a025a04, 0x00000103, + 0x591c0007, 0x8c000500, 0x02020800, 0x00100e99, + 0x591c0402, 0x48025c06, 0x4a025a06, 0x00000003, + 0x0201f800, 0x000202c1, 0x0201f800, 0x00107911, + 0x0201f800, 0x001049b2, 0x5c026000, 0x0201f800, + 0x0002077d, 0x0401f002, 0x5c026000, 0x5c025800, + 0x1c01f000, 0x0401f819, 0x0401f7fd, 0x4933c857, + 0x83380580, 0x00000015, 0x04020004, 0x59a80039, + 0x48023a05, 0x0401f00d, 0x83380580, 0x00000016, + 0x0402000d, 0x4d300000, 0x411e6000, 0x0201f800, + 0x0010a5df, 0x0201f800, 0x000206fd, 0x0201f800, + 0x0002077d, 0x5c026000, 0x497a381c, 0x0201f800, + 0x0002077d, 0x1c01f000, 0x591c0414, 0x84000540, + 0x48023c14, 0x59cc100b, 0x4933c857, 0x491fc857, + 0x492fc857, 0x4803c857, 0x480bc857, 0x8c08153c, + 0x04000006, 0x59a80039, 0x48023a05, 0x497a381c, + 0x0201f000, 0x0002077d, 0x4d300000, 0x411e6000, + 0x0201f800, 0x00108bd7, 0x5c026000, 0x591c0406, + 0x82000580, 0x00000000, 0x02000000, 0x0002077d, + 0x591c0403, 0x82000580, 0x00000050, 0x0402000d, + 0x4d300000, 0x411e6000, 0x4a026203, 0x00000001, + 0x42000800, 0x80000043, 0x0201f800, 0x00020721, + 0x5c026000, 0x497a381c, 0x0201f000, 0x0002077d, + 0x591c0203, 0x82000580, 0x0000000d, 0x04000014, + 0x812e59c0, 0x02000800, 0x001005d8, 0x591c0203, + 0x82000580, 0x00000004, 0x04020011, 0x592c020a, + 0x8c000502, 0x0400000e, 0x4a023812, 0x0fffffff, + 0x592c0208, 0x8400051e, 0x48025a08, 0x42000000, + 0x00000001, 0x48023a14, 0x0401f021, 0x42000000, + 0x00000007, 0x48023a14, 0x0401f01d, 0x592c020a, + 0x4803c857, 0x8c000500, 0x0402000b, 0x8c000502, + 0x040007f7, 0x591c0414, 0x8c00051c, 0x040207eb, + 0x591c0011, 0x4803c857, 0x800001c0, 0x040007f0, + 0x0401f7e6, 0x8c08153a, 0x040207ed, 0x59cc000a, + 0x592c180f, 0x4803c857, 0x480fc857, 0x800c0580, + 0x040007e7, 0x59cc000a, 0x4803c857, 0x48023816, + 0x42000000, 0x00000005, 0x48023a14, 0x0201f000, + 0x00109259, 0x4933c857, 0x4d1c0000, 0x59cc0001, + 0x59341002, 0x80080580, 0x82000500, 0x00ffffff, + 0x04020041, 0x59301419, 0x0201f800, 0x00109410, + 0x02000800, 0x001005d8, 0x591c1406, 0x82080580, + 0x00000007, 0x04000038, 0x82080580, 0x00000002, + 0x04000035, 0x82080580, 0x00000000, 0x04000032, + 0x591c0202, 0x82000d80, 0x0000ffff, 0x04000004, + 0x59301a19, 0x800c0580, 0x0402002b, 0x83380580, + 0x00000015, 0x04000026, 0x4d300000, 0x4d2c0000, + 0x411e6000, 0x59325808, 0x0201f800, 0x00109037, + 0x02000800, 0x001005d8, 0x592c0204, 0x82000500, + 0x000000ff, 0x82000580, 0x00000014, 0x04000003, + 0x4a02621d, 0x00000003, 0x42028000, 0x00000003, + 0x592c0a08, 0x0201f800, 0x00104e70, 0x0201f800, + 0x000202da, 0x5c025800, 0x497a6008, 0x4a026403, + 0x00000085, 0x4a026203, 0x00000009, 0x4a026406, + 0x00000002, 0x42000800, 0x8000404b, 0x0201f800, + 0x00020721, 0x5c026000, 0x0401f003, 0x59a80039, + 0x48023a05, 0x497a381c, 0x0201f800, 0x0002077d, + 0x5c023800, 0x1c01f000, 0x4933c857, 0x4c580000, + 0x4d2c0000, 0x59325808, 0x83383580, 0x00000015, + 0x04000010, 0x59342200, 0x84102502, 0x48126a00, + 0x0201f800, 0x00109037, 0x04000066, 0x0201f800, + 0x00109597, 0x04020005, 0x4200b000, 0x00000002, + 0x0201f800, 0x0010957d, 0x0401fa0a, 0x0401f079, + 0x83cc1400, 0x00000008, 0x4200b000, 0x00000002, + 0x83341c00, 0x00000006, 0x0201f800, 0x0010855a, + 0x04020015, 0x83cc1400, 0x0000000a, 0x4200b000, + 0x00000002, 0x83341c00, 0x00000008, 0x0201f800, + 0x0010855a, 0x0402000c, 0x0201f800, 0x00102074, + 0x59342200, 0x59cc1007, 0x800811c0, 0x04000003, + 0x480a6801, 0x84102542, 0x8410251a, 0x48126a00, + 0x0401f05f, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x59340200, 0x84000558, + 0x48026a00, 0x4d300000, 0x0201f800, 0x0002075a, + 0x02000800, 0x001005d8, 0x49366009, 0x497a6008, + 0x4a026406, 0x00000001, 0x4a026403, 0x00000001, + 0x42003000, 0x00000003, 0x0201f800, 0x0010a942, + 0x0201f800, 0x00103b25, 0x04000011, 0x41782800, + 0x42003000, 0x00000001, 0x4d400000, 0x42028000, + 0x00000029, 0x0201f800, 0x0010a43e, 0x5c028000, + 0x4a026406, 0x00000004, 0x4a026203, 0x00000007, + 0x4a026420, 0x00000001, 0x0401f009, 0x4a026203, + 0x00000001, 0x42000800, 0x0000000b, 0x0201f800, + 0x00104571, 0x0201f800, 0x0010672b, 0x5c026000, + 0x0201f800, 0x00109037, 0x04000022, 0x0201f800, + 0x00109597, 0x04020022, 0x0401f9ae, 0x0401f01d, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x0010203c, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x59340200, 0x84000558, 0x48026a00, 0x42003000, + 0x00000003, 0x41782800, 0x42002000, 0x00000005, + 0x4d400000, 0x4d440000, 0x59368c03, 0x42028000, + 0x00000029, 0x0201f800, 0x0010985e, 0x5c028800, + 0x5c028000, 0x5c027800, 0x0201f800, 0x00102074, + 0x0201f800, 0x0002077d, 0x0401f002, 0x0401fca9, + 0x5c025800, 0x5c00b000, 0x1c01f000, 0x4933c857, + 0x41380000, 0x83383480, 0x00000056, 0x02021800, + 0x001005d8, 0x0c01f001, 0x00107ef7, 0x00107ef2, + 0x00107ef7, 0x00107ef7, 0x00107ef7, 0x00107ef7, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef7, 0x00107ef0, 0x00107ef7, + 0x00107ef7, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef7, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef7, 0x00107ef7, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef7, + 0x00107ef0, 0x00107ef0, 0x00107ef7, 0x00107ef7, + 0x00107ef0, 0x00107ef7, 0x00107ef7, 0x00107ef0, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef7, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef7, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef7, + 0x00107ef0, 0x00107ef0, 0x00107ef0, 0x00107ef7, + 0x0201f800, 0x001005d8, 0x4a026203, 0x00000001, + 0x493a6403, 0x0201f000, 0x0010672b, 0x4933c857, + 0x4a026203, 0x00000001, 0x493a6403, 0x0201f000, + 0x0010672b, 0x4933c857, 0x59300403, 0x82003480, + 0x00000056, 0x02021800, 0x001005d8, 0x83383580, + 0x00000013, 0x04000093, 0x83383580, 0x00000027, + 0x0402004b, 0x0201f800, 0x00106bbf, 0x0201f800, + 0x00109134, 0x0400000b, 0x0201f800, 0x0010914e, + 0x04000041, 0x59300403, 0x82000d80, 0x00000022, + 0x04020038, 0x0401fc61, 0x0400003a, 0x0401f03a, + 0x0201f800, 0x00102074, 0x42000800, 0x00000007, + 0x0201f800, 0x00104571, 0x0401f8fe, 0x4d440000, + 0x59368c03, 0x83440580, 0x000007fe, 0x04020008, + 0x59a81026, 0x84081540, 0x0201f800, 0x0010513b, + 0x04020002, 0x8408154a, 0x480b5026, 0x42028000, + 0x00000029, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x836c0580, 0x00000003, + 0x0400000c, 0x59326809, 0x59340008, 0x800001c0, + 0x04020008, 0x59368c03, 0x4933c857, 0x4937c857, + 0x4947c857, 0x0201f800, 0x001045fb, 0x0401f00c, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x42003000, 0x00000015, 0x41782800, 0x42002000, + 0x00000003, 0x0201f800, 0x0010985e, 0x5c028800, + 0x0201f800, 0x00109326, 0x0201f000, 0x0002077d, + 0x1c01f000, 0x0401f8cb, 0x0401f7fa, 0x83380580, + 0x00000014, 0x0400000b, 0x0201f800, 0x00106f60, + 0x02020000, 0x00107974, 0x59300203, 0x82000580, + 0x00000002, 0x040000ed, 0x0201f800, 0x001005d8, + 0x0201f800, 0x00106bbf, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x0010203c, 0x5c027800, 0x42003000, + 0x00000016, 0x41782800, 0x4d400000, 0x4d440000, + 0x59368c03, 0x42002000, 0x00000009, 0x42028000, + 0x00000029, 0x0201f800, 0x0010985e, 0x5c028800, + 0x5c028000, 0x42000000, 0x0010b864, 0x0201f800, + 0x0010aa47, 0x0201f800, 0x00109134, 0x0402000c, + 0x0201f800, 0x00102074, 0x0401f89e, 0x59340c03, + 0x82040580, 0x000007fe, 0x040207ca, 0x59a80826, + 0x84040d40, 0x48075026, 0x0401f7c6, 0x0201f800, + 0x0010914e, 0x04020003, 0x0401f892, 0x0401f7c1, + 0x59300403, 0x82000d80, 0x00000032, 0x04020004, + 0x0201f800, 0x0010230c, 0x0401f7ba, 0x59300403, + 0x82000d80, 0x00000022, 0x04000886, 0x0401f7b5, + 0x4803c857, 0x0c01f001, 0x00108016, 0x00108016, + 0x00108016, 0x00108016, 0x00108016, 0x00108016, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff9, 0x00108016, 0x00107ff0, 0x00108016, + 0x00108016, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00108016, 0x00108016, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00107ff0, + 0x00108007, 0x00108016, 0x00107ff0, 0x00108000, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108000, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108016, + 0x00108003, 0x00107ff0, 0x00107ff2, 0x00108016, + 0x00107ff0, 0x00108016, 0x00108016, 0x00107ff0, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108016, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108016, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108016, + 0x00107ff0, 0x00107ff0, 0x00107ff0, 0x00108016, + 0x0201f800, 0x001005d8, 0x4d2c0000, 0x59325808, + 0x0201f800, 0x000202da, 0x5c025800, 0x0201f000, + 0x0002077d, 0x4a026203, 0x00000005, 0x59a80039, + 0x48026205, 0x59a80037, 0x48026206, 0x1c01f000, + 0x5930081e, 0x49780a05, 0x0401f014, 0x0201f800, + 0x00109326, 0x0201f000, 0x0002077d, 0x0201f800, + 0x0010230c, 0x0201f800, 0x00106c55, 0x04000005, + 0x0201f800, 0x00106bbf, 0x0201f000, 0x0002077d, + 0x0201f800, 0x00106bbf, 0x0201f800, 0x0002077d, + 0x0201f000, 0x00106c4b, 0x4933c857, 0x4a026203, + 0x00000002, 0x59a80037, 0x48026206, 0x1c01f000, + 0x4933c857, 0x0201f800, 0x00109037, 0x0400002a, + 0x4d2c0000, 0x0201f800, 0x00109597, 0x0402000a, + 0x4d400000, 0x42028000, 0x00000031, 0x42000800, + 0x00000004, 0x0201f800, 0x0010943b, 0x5c028000, + 0x0401f01c, 0x59300c06, 0x82040580, 0x00000010, + 0x04000004, 0x82040580, 0x00000011, 0x0402000a, + 0x4a025a06, 0x00000031, 0x4a02580d, 0x00000004, + 0x4a02580e, 0x000000ff, 0x0201f800, 0x000202da, + 0x0401f00c, 0x592c0404, 0x8c00051e, 0x04000009, + 0x4a025a04, 0x00000103, 0x4a025805, 0x01000000, + 0x5931d821, 0x58ef400b, 0x58ec0009, 0x0801f800, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x59340400, + 0x82000500, 0x000000ff, 0x82003480, 0x0000000c, + 0x02021800, 0x001005d8, 0x59303403, 0x82180d80, + 0x0000004d, 0x02000000, 0x0010938b, 0x82180d80, + 0x00000033, 0x02000000, 0x00109349, 0x82180d80, + 0x00000028, 0x02000000, 0x0010918f, 0x82180d80, + 0x00000029, 0x02000000, 0x001091a3, 0x82180d80, + 0x0000001f, 0x02000000, 0x00107b28, 0x82180d80, + 0x00000055, 0x02000000, 0x00107b01, 0x82180d80, + 0x00000000, 0x04000591, 0x82180d80, 0x00000022, + 0x02000000, 0x00107b55, 0x82180d80, 0x00000035, + 0x02000000, 0x00107c50, 0x82180d80, 0x00000039, + 0x04000539, 0x82180d80, 0x0000003d, 0x02000000, + 0x00107b85, 0x82180d80, 0x00000044, 0x02000000, + 0x00107bc2, 0x82180d80, 0x00000049, 0x02000000, + 0x00107c17, 0x82180d80, 0x00000041, 0x02000000, + 0x00107c03, 0x82180d80, 0x00000043, 0x02000000, + 0x001094dc, 0x82180d80, 0x00000051, 0x02000000, + 0x00109542, 0x82180d80, 0x00000004, 0x04020003, + 0x42000000, 0x00000001, 0x83380d80, 0x00000015, + 0x04000006, 0x83380d80, 0x00000016, 0x02020000, + 0x00107974, 0x0401f20f, 0x4d2c0000, 0x4d3c0000, + 0x0c01f804, 0x5c027800, 0x5c025800, 0x1c01f000, + 0x001080b8, 0x001080bc, 0x001080b8, 0x00108131, + 0x001080b8, 0x00108226, 0x001082bf, 0x001080b8, + 0x001080b8, 0x00108288, 0x001080b8, 0x0010829a, + 0x4933c857, 0x497a6007, 0x59300808, 0x58040000, + 0x4a000a04, 0x00000103, 0x0201f000, 0x0002077d, + 0x4933c857, 0x40000000, 0x40000000, 0x1c01f000, + 0x4933c857, 0x59a80016, 0x82000580, 0x00000074, + 0x0402005c, 0x0201f800, 0x0010a2c8, 0x04020016, + 0x0401f85c, 0x0201f800, 0x00109037, 0x0400000c, + 0x0201f800, 0x00109597, 0x04020009, 0x41780800, + 0x4d400000, 0x42028000, 0x00000000, 0x0201f800, + 0x0010943b, 0x5c028000, 0x0401f003, 0x0201f800, + 0x00102074, 0x0201f800, 0x001048c1, 0x0201f000, + 0x0002077d, 0x0201f800, 0x00109037, 0x04000007, + 0x0201f800, 0x00109597, 0x04020004, 0x0401ff3d, + 0x0201f000, 0x0002077d, 0x417a7800, 0x0201f800, + 0x0010203c, 0x42000000, 0x0010b864, 0x0201f800, + 0x0010aa47, 0x59340200, 0x84000558, 0x48026a00, + 0x42003000, 0x00000003, 0x0201f800, 0x0010a942, + 0x4d300000, 0x0201f800, 0x0002075a, 0x02000800, + 0x001005d8, 0x49366009, 0x497a6008, 0x4a026406, + 0x00000001, 0x4a026403, 0x00000001, 0x0201f800, + 0x00103b25, 0x04000011, 0x4a026406, 0x00000004, + 0x4a026203, 0x00000007, 0x4a026420, 0x00000001, + 0x42003000, 0x00000001, 0x4d400000, 0x42028000, + 0x00000029, 0x41782800, 0x0201f800, 0x0010a43e, + 0x5c028000, 0x0401f009, 0x42000800, 0x0000000b, + 0x0201f800, 0x00104571, 0x4a026203, 0x00000001, + 0x0201f800, 0x0010672b, 0x5c026000, 0x0401ff05, + 0x0201f800, 0x00102074, 0x0201f000, 0x0002077d, + 0x0401ff00, 0x42000000, 0x00000001, 0x0401f0c7, + 0x4933c857, 0x59340200, 0x8c000500, 0x0400000d, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x00104567, + 0x5c027800, 0x0201f800, 0x00103b25, 0x04000005, + 0x42000800, 0x00000006, 0x0201f800, 0x00104571, + 0x1c01f000, 0x4933c857, 0x59a80816, 0x82040580, + 0x00000074, 0x0400000e, 0x4807c857, 0x82040580, + 0x00000100, 0x040200a0, 0x59cc0408, 0x4803c857, + 0x8c000500, 0x0400009c, 0x59341403, 0x82080580, + 0x000007fe, 0x04000006, 0x0401f097, 0x59341403, + 0x82080580, 0x000007fe, 0x04020003, 0x0401fa9c, + 0x0401f04c, 0x0201f800, 0x0010462a, 0x59341403, + 0x82080580, 0x000007fc, 0x0402001f, 0x4a026802, + 0x00fffffc, 0x0201f800, 0x00109037, 0x04000012, + 0x0201f800, 0x00109597, 0x0402000f, 0x0401f8a9, + 0x41780800, 0x4d400000, 0x42028000, 0x00000000, + 0x0201f800, 0x0010943b, 0x5c028000, 0x42000800, + 0x00000004, 0x0201f800, 0x00104571, 0x0201f000, + 0x0002077d, 0x42000800, 0x00000004, 0x0201f800, + 0x00104571, 0x0201f800, 0x00102074, 0x0201f000, + 0x0002077d, 0x59a80005, 0x8c000514, 0x04000011, + 0x0201f800, 0x0010513b, 0x42001000, 0x00000010, + 0x04020009, 0x59340002, 0x82000500, 0x00ff0000, + 0x82000580, 0x00ff0000, 0x04000006, 0x42001000, + 0x00000008, 0x0201f800, 0x00104c6d, 0x0402005a, + 0x0201f800, 0x00109037, 0x0400005b, 0x0201f800, + 0x00109597, 0x04020005, 0x592c0404, 0x8c00051c, + 0x040207c9, 0x0401f877, 0x42000800, 0x00000005, + 0x0201f800, 0x00104571, 0x4a026203, 0x00000001, + 0x4a026403, 0x00000003, 0x0201f000, 0x0010672b, + 0x59cc0408, 0x8c000518, 0x04000010, 0x0201f800, + 0x001092e5, 0x0201f800, 0x0010513b, 0x04000004, + 0x59cc0408, 0x8c000516, 0x040207b3, 0x59a80026, + 0x8400054a, 0x48035026, 0x59a80010, 0x84000570, + 0x48038832, 0x0401f7ac, 0x42001000, 0x000000ef, + 0x480b5010, 0x497b8830, 0x84081570, 0x480b8832, + 0x59c40802, 0x84040d4c, 0x48078802, 0x0201f800, + 0x0010930f, 0x59a80026, 0x84000548, 0x48035026, + 0x0201f800, 0x0010a3da, 0x0402079b, 0x59a80026, + 0x8400054c, 0x48035026, 0x42000800, 0x00000006, + 0x0201f800, 0x00104571, 0x417a7800, 0x0201f800, + 0x00104567, 0x42000000, 0x000000e8, 0x0201f800, + 0x00105c9a, 0x02000800, 0x001045a6, 0x02020800, + 0x001005d8, 0x49366009, 0x59340200, 0x8400051a, + 0x48026a00, 0x42000800, 0x00000003, 0x0201f800, + 0x00104571, 0x4a026406, 0x00000001, 0x4a026203, + 0x00000001, 0x4a026403, 0x00000002, 0x0201f000, + 0x0010672b, 0x0401fe43, 0x42000000, 0x00000001, + 0x0401f00a, 0x599c0017, 0x8c00050a, 0x040007ab, + 0x42000800, 0x00000004, 0x0201f800, 0x00104571, + 0x0201f000, 0x0002077d, 0x4933c857, 0x80003540, + 0x04000005, 0x42000800, 0x00000007, 0x0201f800, + 0x00104571, 0x801831c0, 0x0402000e, 0x59302008, + 0x801021c0, 0x04000004, 0x58100404, 0x8c00051e, + 0x04020008, 0x59341c03, 0x42002000, 0x00000004, + 0x42003000, 0x00000012, 0x0201f800, 0x00103aae, + 0x0201f800, 0x00102074, 0x0201f000, 0x0002077d, + 0x4c5c0000, 0x4d2c0000, 0x59325808, 0x0201f800, + 0x00105755, 0x5c025800, 0x59cc0008, 0x48002805, + 0x59cc0009, 0x48002806, 0x49782807, 0x49782808, + 0x49782809, 0x4978280a, 0x59cc0013, 0x8c00053e, + 0x04000009, 0x59cc0414, 0x900001c0, 0x59ccbc15, + 0x805c0540, 0x48002807, 0x59cc0416, 0x900001c0, + 0x48002808, 0x59cc0017, 0x8c00053e, 0x04000009, + 0x59cc0418, 0x900001c0, 0x59ccbc19, 0x805c0540, + 0x48002809, 0x59cc041a, 0x900001c0, 0x4800280a, + 0x5c00b800, 0x1c01f000, 0x4933c857, 0x59a80016, + 0x82000580, 0x00000014, 0x04020048, 0x59a80005, + 0x8c000514, 0x04000015, 0x0201f800, 0x0010513b, + 0x42001000, 0x00000010, 0x04020009, 0x59340002, + 0x82000500, 0x00ff0000, 0x82000580, 0x00ff0000, + 0x0400000a, 0x42001000, 0x00000008, 0x0201f800, + 0x00104c6d, 0x04000005, 0x59a80005, 0x84000556, + 0x48035005, 0x0401f031, 0x836c0580, 0x00000003, + 0x0402000b, 0x59300008, 0x80000540, 0x04020008, + 0x59341c03, 0x42002000, 0x00000006, 0x42003000, + 0x00000013, 0x0201f800, 0x00103aae, 0x0201f800, + 0x0010468d, 0x0401fecf, 0x0401fa1d, 0x0402001f, + 0x59340404, 0x80000540, 0x0400001c, 0x42000800, + 0x00000006, 0x0201f800, 0x00104571, 0x0201f800, + 0x00109037, 0x04000011, 0x0201f800, 0x00109597, + 0x0402000a, 0x41780800, 0x4d400000, 0x42028000, + 0x00000000, 0x0201f800, 0x0010943b, 0x5c028000, + 0x0201f000, 0x0002077d, 0x4a025a04, 0x00000103, + 0x4a025805, 0x02000000, 0x0201f800, 0x00102074, + 0x0201f000, 0x0002077d, 0x0201f800, 0x00104c19, + 0x0201f800, 0x00109037, 0x04000007, 0x0201f800, + 0x00109597, 0x04020004, 0x0401fda2, 0x0201f000, + 0x0002077d, 0x0401fd9f, 0x80000580, 0x59a80005, + 0x8c000516, 0x04000005, 0x84000516, 0x48035005, + 0x82000540, 0x00000001, 0x0401ff60, 0x1c01f000, + 0x4933c857, 0x59a80016, 0x82000580, 0x00000014, + 0x0402000b, 0x42000800, 0x0000000b, 0x0201f800, + 0x00104571, 0x4a026203, 0x00000001, 0x4a026403, + 0x00000001, 0x0201f000, 0x0010672b, 0x42000000, + 0x00000001, 0x0401f74d, 0x4933c857, 0x40003000, + 0x59a80016, 0x82000580, 0x00000004, 0x0402000a, + 0x82183580, 0x0000000b, 0x04020005, 0x42000800, + 0x00000007, 0x0201f800, 0x00104571, 0x0201f000, + 0x0002077d, 0x42000000, 0x00000001, 0x0401f73b, + 0x4803c857, 0x4d2c0000, 0x4d3c0000, 0x0c01f804, + 0x5c027800, 0x5c025800, 0x1c01f000, 0x001080b8, + 0x001082ce, 0x001080b8, 0x00108323, 0x001080b8, + 0x00108391, 0x001082bf, 0x001080b8, 0x001080b8, + 0x001083b1, 0x001080b8, 0x001083c1, 0x4933c857, + 0x4d1c0000, 0x59301403, 0x82080580, 0x00000003, + 0x04000008, 0x82081580, 0x0000001e, 0x04020003, + 0x0201f800, 0x0002077d, 0x5c023800, 0x1c01f000, + 0x0401ff5a, 0x0401f7fd, 0x4933c857, 0x0201f800, + 0x00109037, 0x0400000b, 0x0201f800, 0x00109597, + 0x04020008, 0x4200b000, 0x00000002, 0x0201f800, + 0x0010957d, 0x0401fd43, 0x0201f000, 0x0002077d, + 0x0401f8f5, 0x04020030, 0x417a7800, 0x0201f800, + 0x00104567, 0x417a7800, 0x0201f800, 0x0010203c, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x59340200, 0x84000558, 0x48026a00, 0x4a026403, + 0x00000002, 0x42003000, 0x00000003, 0x0201f800, + 0x0010a942, 0x0201f800, 0x00103b25, 0x04000011, + 0x4d400000, 0x41782800, 0x42003000, 0x00000005, + 0x42028000, 0x00000029, 0x0201f800, 0x0010a43e, + 0x5c028000, 0x4a026203, 0x00000007, 0x4a026406, + 0x00000004, 0x4a026420, 0x00000001, 0x1c01f000, + 0x42000800, 0x00000003, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x0201f800, 0x0010672b, + 0x0401f7f7, 0x59cc0407, 0x82000580, 0x00000009, + 0x0402000a, 0x59340412, 0x82000500, 0x000000ff, + 0x0400000c, 0x80000040, 0x48026c12, 0x4a026206, + 0x0000000a, 0x0401f7ea, 0x59cc0207, 0x82000500, + 0x0000ff00, 0x82000580, 0x00001900, 0x040007c2, + 0x0401fcfc, 0x80000580, 0x0401f6c4, 0x4933c857, + 0x59a80032, 0x80000540, 0x04000015, 0x59340403, + 0x82000580, 0x000007fe, 0x04020011, 0x59a80010, + 0x80000000, 0x48035010, 0x417a7800, 0x0201f800, + 0x00104567, 0x42000800, 0x00000003, 0x0201f800, + 0x00104571, 0x4a026203, 0x00000001, 0x4a026403, + 0x00000002, 0x0201f000, 0x0010672b, 0x0201f800, + 0x00109037, 0x04000011, 0x0201f800, 0x00109597, + 0x0402000e, 0x4c580000, 0x4200b000, 0x00000002, + 0x0201f800, 0x0010957d, 0x5c00b000, 0x0401fcd5, + 0x42000800, 0x00000007, 0x0201f800, 0x00104571, + 0x0201f000, 0x0002077d, 0x0401fcce, 0x59cc3407, + 0x82183500, 0x000000ff, 0x82180580, 0x00000005, + 0x0400001c, 0x82180580, 0x0000000b, 0x04000016, + 0x59cc0207, 0x82000500, 0x0000ff00, 0x04020004, + 0x82180580, 0x00000009, 0x04000012, 0x82000580, + 0x00001900, 0x0402000c, 0x82180580, 0x00000009, + 0x0400000c, 0x42000800, 0x00000004, 0x0201f800, + 0x00104571, 0x0201f800, 0x00102074, 0x0201f000, + 0x0002077d, 0x42000000, 0x00000001, 0x0401f677, + 0x0201f800, 0x00109037, 0x59325808, 0x04000008, + 0x592c0204, 0x82000580, 0x00000139, 0x040007f6, + 0x592c0404, 0x8c00051e, 0x040207f3, 0x59340403, + 0x82000580, 0x000007fe, 0x04020007, 0x59a80026, + 0x84000540, 0x48035026, 0x0201f800, 0x00104229, + 0x0401f7e9, 0x417a7800, 0x0201f800, 0x0010203c, + 0x42003000, 0x00000005, 0x0201f800, 0x0010a942, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x0401f7dd, 0x4933c857, 0x0401f84d, 0x0402000b, + 0x42000800, 0x00000005, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000003, + 0x0201f000, 0x0010672b, 0x42000800, 0x00000004, + 0x0201f800, 0x00104571, 0x0201f800, 0x00109597, + 0x0402000a, 0x4c580000, 0x4200b000, 0x00000002, + 0x0201f800, 0x0010957d, 0x5c00b000, 0x0401fc71, + 0x0201f000, 0x0002077d, 0x0401fc6e, 0x80000580, + 0x0401f636, 0x4933c857, 0x0401f82d, 0x0402000b, + 0x42000800, 0x00000009, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000005, + 0x0201f000, 0x0010672b, 0x42000000, 0x00000001, + 0x0401f626, 0x4933c857, 0x0401f81d, 0x0402000b, + 0x42000800, 0x0000000b, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000001, + 0x0201f000, 0x0010672b, 0x42000000, 0x00000001, + 0x0401f616, 0x4933c857, 0x59cc0407, 0x82000580, + 0x00000003, 0x04020009, 0x59cc0207, 0x82000500, + 0x0000ff00, 0x82000d80, 0x00002a00, 0x04000003, + 0x82000d80, 0x00001e00, 0x1c01f000, 0x4933c857, + 0x82000540, 0x00000001, 0x1c01f000, 0x4933c857, + 0x4d400000, 0x4c580000, 0x59a80026, 0x82000540, + 0x00000003, 0x48035026, 0x0401f85c, 0x04000038, + 0x4d340000, 0x4d440000, 0x59a80026, 0x84000552, + 0x48035026, 0x0201f800, 0x00103b25, 0x0400000c, + 0x42028000, 0x0000002a, 0x42028800, 0x0000ffff, + 0x42003000, 0x00000002, 0x0201f800, 0x0010a446, + 0x59a80805, 0x84040d44, 0x48075005, 0x42028000, + 0x0000002a, 0x4d3c0000, 0x42027800, 0x00000204, + 0x0201f800, 0x00101fe5, 0x5c027800, 0x42000000, + 0x0010b864, 0x0201f800, 0x0010aa47, 0x0201f800, + 0x00101e45, 0x4200b000, 0x00000010, 0x42028800, + 0x000007f0, 0x4d2c0000, 0x83440580, 0x000007fe, + 0x04000003, 0x0201f800, 0x001045fb, 0x81468800, + 0x8058b040, 0x040207f9, 0x5c025800, 0x59cc0408, + 0x8c00051e, 0x04000004, 0x59a80026, 0x84000512, + 0x48035026, 0x5c028800, 0x5c026800, 0x0201f800, + 0x0010462a, 0x4a026802, 0x00fffffe, 0x59a80826, + 0x84040d50, 0x59cc0013, 0x8c00053e, 0x04000003, + 0x8c000536, 0x04000004, 0x59cc0017, 0x8c000536, + 0x04020002, 0x84040d10, 0x48075026, 0x59cc0800, + 0x82040d00, 0x00ffffff, 0x48075010, 0x80040110, + 0x4803501d, 0x48038881, 0x0201f800, 0x0010513b, + 0x04000007, 0x59cc0009, 0x48035035, 0x59cc000a, + 0x48035036, 0x0201f800, 0x001092e5, 0x5c00b000, + 0x5c028000, 0x1c01f000, 0x4933c857, 0x4c580000, + 0x59a80010, 0x82000500, 0x00ffff00, 0x04000022, + 0x59cc1000, 0x82081500, 0x00ffff00, 0x80080580, + 0x04000004, 0x42000000, 0x0010b83b, 0x0401f016, + 0x83cc1400, 0x0000000b, 0x4200b000, 0x00000002, + 0x83341c00, 0x00000006, 0x0401f900, 0x04000004, + 0x42000000, 0x0010b83c, 0x0401f00b, 0x83cc1400, + 0x0000000d, 0x4200b000, 0x00000002, 0x83341c00, + 0x00000008, 0x0401f8f5, 0x04000007, 0x42000000, + 0x0010b83d, 0x0201f800, 0x0010aa47, 0x82000540, + 0x00000001, 0x5c00b000, 0x1c01f000, 0x4933c857, + 0x59cc0206, 0x82000580, 0x00000014, 0x04020016, + 0x59cc0407, 0x82000580, 0x00000800, 0x04020012, + 0x59cc0207, 0x8c00051a, 0x0400000d, 0x82000500, + 0x00000f00, 0x82000580, 0x00000100, 0x04020008, + 0x59cc020a, 0x8c000508, 0x04020003, 0x8c00050a, + 0x04000003, 0x80000580, 0x1c01f000, 0x82000540, + 0x00000001, 0x1c01f000, 0x4933c857, 0x4943c857, + 0x493fc857, 0x4c5c0000, 0x4d300000, 0x4d340000, + 0x4d2c0000, 0x4d380000, 0x4130b800, 0x42026000, + 0x0010d1c0, 0x59a8000e, 0x81640480, 0x040210bd, + 0x8d3e7d12, 0x04000004, 0x405c0000, 0x81300580, + 0x040000b3, 0x59300406, 0x82000c80, 0x00000012, + 0x04021015, 0x59326809, 0x0c01f001, 0x0010854f, + 0x001084bc, 0x001084d3, 0x001084de, 0x001084b7, + 0x001084ce, 0x00108507, 0x0010854f, 0x001084b5, + 0x0010851b, 0x0010852a, 0x001084b5, 0x001084b5, + 0x001084b5, 0x001084b5, 0x0010854f, 0x00108540, + 0x00108538, 0x0201f800, 0x001005d8, 0x8d3e7d18, + 0x04000004, 0x59300420, 0x8c000500, 0x04020094, + 0x59300403, 0x82000580, 0x00000043, 0x04000090, + 0x0201f800, 0x00109134, 0x02000800, 0x00102074, + 0x0201f800, 0x0010914e, 0x02000800, 0x0010801c, + 0x8d3e7d06, 0x04000084, 0x0201f800, 0x001092d7, + 0x04000083, 0x0401f080, 0x8d3e7d16, 0x04000004, + 0x59300420, 0x8c000500, 0x0402007d, 0x59325808, + 0x0201f800, 0x00109037, 0x04000077, 0x49425a06, + 0x497a5c09, 0x0201f800, 0x000202da, 0x0201f800, + 0x0010912a, 0x0401f070, 0x813669c0, 0x02000800, + 0x001005d8, 0x8d3e7d06, 0x04000004, 0x59340200, + 0x8c00050e, 0x0402006a, 0x59300004, 0x8400055c, + 0x48026004, 0x59300203, 0x82000580, 0x00000004, + 0x02000800, 0x00100e99, 0x59325808, 0x0201f800, + 0x00109037, 0x0400005c, 0x4a025a04, 0x00000103, + 0x59300402, 0x48025c06, 0x592c0408, 0x8c000512, + 0x04000006, 0x4d2c0000, 0x592e5809, 0x0201f800, + 0x001007fd, 0x5c025800, 0x49425a06, 0x497a5c09, + 0x0201f800, 0x0010959c, 0x0201f800, 0x000202da, + 0x0201f800, 0x0010912a, 0x0401f047, 0x8c000518, + 0x04000047, 0x59300203, 0x82000580, 0x00000004, + 0x02000800, 0x00100e99, 0x59325808, 0x0201f800, + 0x00109037, 0x0400003c, 0x49425a06, 0x497a5c09, + 0x0201f800, 0x0010a693, 0x0201f800, 0x0010959c, + 0x0201f800, 0x000202da, 0x0401f033, 0x0201f800, + 0x001062d5, 0x04000032, 0x59300203, 0x82000580, + 0x00000004, 0x04020004, 0x0201f800, 0x00100e99, + 0x0401f02b, 0x42027000, 0x00000047, 0x0201f800, + 0x000207a1, 0x0401f026, 0x59300203, 0x82000580, + 0x00000004, 0x02000800, 0x00100e99, 0x59325808, + 0x0201f800, 0x00109037, 0x0400001b, 0x49425a06, + 0x497a5c09, 0x0201f800, 0x000202da, 0x0401f016, + 0x833c0500, 0x00001800, 0x04000015, 0x8d3e7d16, + 0x04020013, 0x59325817, 0x0201f800, 0x001007fd, + 0x59300203, 0x82000580, 0x00000004, 0x02000800, + 0x00100e99, 0x59325808, 0x0201f800, 0x00109037, + 0x04000005, 0x49425a06, 0x497a5c09, 0x0201f800, + 0x000202da, 0x0201f800, 0x00107911, 0x83326400, + 0x00000024, 0x41580000, 0x81300480, 0x04001742, + 0x5c027000, 0x5c025800, 0x5c026800, 0x5c026000, + 0x5c00b800, 0x1c01f000, 0x5c000000, 0x4c000000, + 0x4803c857, 0x480bc857, 0x480fc857, 0x485bc857, + 0x50080800, 0x500c0000, 0x80042580, 0x04020007, + 0x80081000, 0x800c1800, 0x8058b040, 0x040207f9, + 0x80000580, 0x1c01f000, 0x4803c857, 0x4807c857, + 0x480bc857, 0x480fc857, 0x80040480, 0x04001006, + 0x42000000, 0x00000001, 0x82040d40, 0x00000001, + 0x1c01f000, 0x41780000, 0x0401f7fc, 0x83380480, + 0x00000053, 0x02021800, 0x001005d8, 0x83380480, + 0x0000004b, 0x02001800, 0x001005d8, 0x0c01f001, + 0x0010858a, 0x0010858a, 0x0010858a, 0x0010858a, + 0x00108588, 0x00108588, 0x00108588, 0x0010858a, + 0x0201f800, 0x001005d8, 0x493bc857, 0x4a026203, + 0x0000000d, 0x493a6403, 0x42000800, 0x80000000, + 0x0201f000, 0x00020721, 0x83380580, 0x00000013, + 0x04020008, 0x59300403, 0x82000580, 0x00000050, + 0x02020800, 0x001005d8, 0x0201f000, 0x0002077d, + 0x4933c857, 0x83380580, 0x00000027, 0x04020030, + 0x4933c857, 0x0201f800, 0x00106bbf, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x0010203c, 0x5c027800, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x4d2c0000, 0x59325808, 0x0201f800, 0x00109037, + 0x492fc857, 0x0400000d, 0x4a025a04, 0x00000103, + 0x59300c02, 0x48065c06, 0x4a025a06, 0x00000029, + 0x497a5c09, 0x592c0c08, 0x84040d50, 0x48065c08, + 0x0201f800, 0x000202da, 0x5c025800, 0x42003000, + 0x00000015, 0x41782800, 0x42002000, 0x00000003, + 0x4d400000, 0x4d440000, 0x59368c03, 0x42028000, + 0x00000029, 0x0201f800, 0x0010985e, 0x5c028800, + 0x5c028000, 0x0201f000, 0x0002077d, 0x83380580, + 0x00000014, 0x0402000c, 0x59300403, 0x82000c80, + 0x00000053, 0x02021800, 0x001005d8, 0x82000480, + 0x00000040, 0x02001800, 0x001005d8, 0x4803c857, + 0x0c01f00e, 0x83380580, 0x00000053, 0x0400000a, + 0x83380580, 0x00000048, 0x02020800, 0x001005d8, + 0x59300403, 0x82000580, 0x00000050, 0x02020800, + 0x001005d8, 0x1c01f000, 0x001085ff, 0x001085fd, + 0x001085fd, 0x001085fd, 0x001085fd, 0x001085fd, + 0x001085fd, 0x001085fd, 0x001085fd, 0x001085fd, + 0x001085fd, 0x00108616, 0x00108616, 0x00108616, + 0x00108616, 0x001085fd, 0x00108616, 0x001085fd, + 0x00108616, 0x0201f800, 0x001005d8, 0x4933c857, + 0x0201f800, 0x00106bbf, 0x0201f800, 0x00109037, + 0x02000000, 0x0002077d, 0x4d2c0000, 0x59325808, + 0x4a025a04, 0x00000103, 0x59300402, 0x48025c06, + 0x4a025a06, 0x00000006, 0x497a5c09, 0x0201f800, + 0x000202da, 0x5c025800, 0x0201f800, 0x0010912a, + 0x0201f000, 0x0002077d, 0x4933c857, 0x0201f800, + 0x00106bbf, 0x0201f000, 0x0002077d, 0x0201f800, + 0x001005d8, 0x5930001c, 0x800001c0, 0x02020800, + 0x0010984e, 0x59300004, 0x8c00053e, 0x04020029, + 0x59325808, 0x592c0c08, 0x59cc2a08, 0x82141d00, + 0x00000c00, 0x04000002, 0x59cc1809, 0x84040d58, + 0x48065c08, 0x82143500, 0x00000fff, 0x04020027, + 0x59340200, 0x8c00050e, 0x04020080, 0x0201f800, + 0x0002082b, 0x04020006, 0x4a025a06, 0x00000000, + 0x59300811, 0x800409c0, 0x0402094b, 0x4a025a04, + 0x00000103, 0x48065807, 0x480e580a, 0x48165c09, + 0x59300c02, 0x48065c06, 0x0201f800, 0x000202c1, + 0x0201f800, 0x001049b2, 0x59cc0208, 0x8c000518, + 0x02020000, 0x001091d1, 0x0201f000, 0x0002077d, + 0x0201f800, 0x00106f60, 0x040007d6, 0x4d3c0000, + 0x42027800, 0x00000002, 0x0201f800, 0x00108be3, + 0x5c027800, 0x0401f7cf, 0x4817c857, 0x480fc857, + 0x82180500, 0x000000ff, 0x0400000e, 0x592c0204, + 0x82000500, 0x000000ff, 0x82000580, 0x00000048, + 0x04020008, 0x592c0407, 0x800001c0, 0x04000005, + 0x0201f800, 0x0010973f, 0x0201f000, 0x00109787, + 0x82180d00, 0x00000c00, 0x04000004, 0x59340200, + 0x8c00050e, 0x04020032, 0x4a025a06, 0x00000000, + 0x41782000, 0x8c183510, 0x04000007, 0x59cc000c, + 0x82000500, 0x000000ff, 0x04000002, 0x4803c857, + 0x59cc200b, 0x4812580c, 0x41780000, 0x8c183512, + 0x04000002, 0x59cc000a, 0x4802580b, 0x80100c00, + 0x040007b8, 0x82041480, 0x0000001d, 0x04001006, + 0x592c0404, 0x8c00051e, 0x0400000e, 0x42000800, + 0x0000001c, 0x4c500000, 0x4c540000, 0x83cca400, + 0x0000000c, 0x832cac00, 0x0000000d, 0x0201f800, + 0x00108b9f, 0x5c00a800, 0x5c00a000, 0x0401f7a5, + 0x59300011, 0x59301402, 0x480a5c06, 0x48025807, + 0x480e580a, 0x48165c09, 0x0201f800, 0x00108b48, + 0x0201f800, 0x00108b84, 0x0401f7a6, 0x592c020a, + 0x8c000502, 0x040007cd, 0x592c0208, 0x8c00050e, + 0x040207ca, 0x59300011, 0x800c0d80, 0x040007c7, + 0x4803c857, 0x480fc857, 0x8c183514, 0x02000000, + 0x0010920f, 0x80000540, 0x040007c0, 0x4807c856, + 0x0201f000, 0x0010920f, 0x592c020a, 0x8c000502, + 0x04000782, 0x59300011, 0x800001c0, 0x0400077f, + 0x592c0208, 0x8c00050e, 0x0402077c, 0x0201f000, + 0x0010920f, 0x59cc2006, 0x59cc2807, 0x0401f035, + 0x0401f034, 0x1c01f000, 0x4933c857, 0x5930001c, + 0x800001c0, 0x02020800, 0x0010984e, 0x59325808, + 0x592c0c08, 0x41782800, 0x41781800, 0x84040d58, + 0x48065c08, 0x41783000, 0x59340200, 0x8c00050e, + 0x04020018, 0x0201f800, 0x0002082b, 0x04020007, + 0x4a025a06, 0x00000000, 0x59300811, 0x4807c857, + 0x800409c0, 0x040208ac, 0x4a025a04, 0x00000103, + 0x48065807, 0x480e580a, 0x48165c09, 0x4933c857, + 0x59300c02, 0x48065c06, 0x0201f800, 0x000202c1, + 0x0201f800, 0x001049b2, 0x0201f000, 0x0002077d, + 0x592c020a, 0x8c000502, 0x040007ea, 0x59300011, + 0x4803c857, 0x800001c0, 0x040007e6, 0x592c0208, + 0x8c00050e, 0x040207e3, 0x0201f000, 0x0010920f, + 0x5930001c, 0x800001c0, 0x4c100000, 0x4c140000, + 0x02020800, 0x0010984e, 0x5c002800, 0x5c002000, + 0x4a026203, 0x00000002, 0x4a026403, 0x00000043, + 0x59325808, 0x592c020a, 0x8c000502, 0x04020018, + 0x40100000, 0x592c080f, 0x80040c80, 0x40140000, + 0x80040480, 0x04001014, 0x48126013, 0x48166011, + 0x59300004, 0x8c00053e, 0x04020008, 0x497a6205, + 0x0201f800, 0x00100f93, 0x04020009, 0x59300804, + 0x0201f000, 0x00106721, 0x0201f800, 0x00106f60, + 0x040007f7, 0x0201f000, 0x00107974, 0x4933c857, + 0x1c01f000, 0x4807c857, 0x40042800, 0x0401f7eb, + 0x83380480, 0x00000058, 0x04021005, 0x83380480, + 0x00000040, 0x04001002, 0x0c01f002, 0x1c01f000, + 0x00108740, 0x00108740, 0x00108740, 0x00108740, + 0x00108740, 0x00108740, 0x00108740, 0x00108740, + 0x00108740, 0x00108740, 0x00108742, 0x00108740, + 0x00108740, 0x00108740, 0x00108740, 0x0010874f, + 0x00108740, 0x00108740, 0x00108740, 0x00108740, + 0x0010877d, 0x00108740, 0x00108740, 0x00108740, + 0x0201f800, 0x001005d8, 0x4933c857, 0x0201f800, + 0x00106dc3, 0x4a026203, 0x00000002, 0x59a80039, + 0x48026205, 0x59300011, 0x59300815, 0x80040c80, + 0x48066015, 0x0201f000, 0x00106b8a, 0x4933c857, + 0x0201f800, 0x00106b8a, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x0010203c, 0x5c027800, 0x42000000, + 0x0010b864, 0x0201f800, 0x0010aa47, 0x0201f800, + 0x00109037, 0x04000010, 0x4d2c0000, 0x59325808, + 0x4a025a04, 0x00000103, 0x59300402, 0x48025c06, + 0x4a025a06, 0x00000029, 0x497a5c09, 0x592c0c08, + 0x84040d50, 0x48065c08, 0x0201f800, 0x000202da, + 0x5c025800, 0x42003000, 0x00000014, 0x41782800, + 0x4d400000, 0x4d440000, 0x59368c03, 0x42002000, + 0x00000002, 0x42028000, 0x00000029, 0x0201f800, + 0x0010985e, 0x5c028800, 0x5c028000, 0x0201f000, + 0x0002077d, 0x4933c857, 0x59300808, 0x49780c09, + 0x4978080a, 0x58041408, 0x84081558, 0x48080c08, + 0x1c01f000, 0x4807c857, 0x8c040d3e, 0x04020023, + 0x497a5a06, 0x5930001f, 0x80000540, 0x04000017, + 0x497a5a06, 0x4c040000, 0x4c080000, 0x4c0c0000, + 0x4c100000, 0x4c140000, 0x58f41003, 0x40040000, + 0x80081480, 0x5930001f, 0x4809e803, 0x0201f800, + 0x00100d56, 0x5c002800, 0x5c002000, 0x5c001800, + 0x5c001000, 0x5c000800, 0x592c0206, 0x80000540, + 0x04020009, 0x0401f005, 0x592c0408, 0x8c00051c, + 0x04000002, 0x592c0803, 0x4807c857, 0x4a025a06, + 0x00000015, 0x1c01f000, 0x5930001f, 0x80000540, + 0x04000009, 0x4a025a06, 0x00000011, 0x5930001f, + 0x4c040000, 0x0201f800, 0x00100d56, 0x5c000800, + 0x0401f7f5, 0x4807c856, 0x4a025a06, 0x00000007, + 0x1c01f000, 0x83380480, 0x00000058, 0x04021007, + 0x83380480, 0x00000040, 0x04001004, 0x4d2c0000, + 0x0c01f803, 0x5c025800, 0x1c01f000, 0x001087db, + 0x001087db, 0x001087db, 0x001087db, 0x001087db, + 0x001087dd, 0x001087db, 0x001087db, 0x00108860, + 0x001087db, 0x001087db, 0x001087db, 0x001087db, + 0x001087db, 0x001087db, 0x001087db, 0x001087db, + 0x001087db, 0x001087db, 0x00108910, 0x00108939, + 0x00108918, 0x001087db, 0x00108945, 0x0201f800, + 0x001005d8, 0x5930001c, 0x800001c0, 0x02020800, + 0x0010984e, 0x59300007, 0x8c00050e, 0x0400007c, + 0x8c000500, 0x0400006e, 0x8c00051c, 0x04000009, + 0x84000500, 0x48026007, 0x59325808, 0x592c3c08, + 0x841c3d58, 0x481e5c08, 0x0201f000, 0x000207dd, + 0x59325808, 0x592c3c08, 0x841c3d58, 0x59300007, + 0x8c00051c, 0x040207f3, 0x481e5c08, 0x42000000, + 0x00000005, 0x40000000, 0x80000040, 0x040207fe, + 0x59300007, 0x8c00051c, 0x040207ea, 0x59cc0a08, + 0x592c0204, 0x82000500, 0x000000ff, 0x82000580, + 0x00000048, 0x0402000c, 0x497a580b, 0x82040500, + 0x000000ff, 0x04000008, 0x592c0407, 0x800001c0, + 0x04000005, 0x0201f800, 0x0010973f, 0x0201f000, + 0x00100e56, 0x48065c09, 0x41782000, 0x82040500, + 0x00000c00, 0x04000002, 0x59cc2009, 0x82043500, + 0x00000fff, 0x04020027, 0x481e5c08, 0x4a025a06, + 0x00000000, 0x801831c0, 0x02000000, 0x00100e56, + 0x41782000, 0x8c183510, 0x04000002, 0x59cc200b, + 0x4812580c, 0x41780000, 0x8c183512, 0x04000002, + 0x59cc000a, 0x4802580b, 0x80100c00, 0x02001800, + 0x001005d8, 0x02000000, 0x00100e56, 0x82041480, + 0x0000001d, 0x0402100c, 0x4c500000, 0x4c540000, + 0x83cca400, 0x0000000c, 0x832cac00, 0x0000000d, + 0x0401fb67, 0x5c00a800, 0x5c00a000, 0x0201f000, + 0x00100e56, 0x0401fb0b, 0x0201f000, 0x00100e56, + 0x412c7800, 0x0201f800, 0x001007e4, 0x02000800, + 0x001005d8, 0x492c7809, 0x841c3d52, 0x481c7c08, + 0x4a025a04, 0x00000103, 0x4812580a, 0x48065c09, + 0x583c0404, 0x583c1005, 0x583c2208, 0x48025c04, + 0x480a5805, 0x48125a08, 0x0401f7c8, 0x8c000524, + 0x04000794, 0x59325808, 0x4c000000, 0x592c0408, + 0x8c00051c, 0x5c000000, 0x04020003, 0x4a026011, + 0xffffffff, 0x84000524, 0x0401f78a, 0x1c01f000, + 0x59a80039, 0x48026205, 0x59325808, 0x4a026203, + 0x00000002, 0x592c2408, 0x59300807, 0x4933c857, + 0x4807c857, 0x592c0204, 0x82000500, 0x000000ff, + 0x82000580, 0x00000048, 0x04020004, 0x8c102500, + 0x02020000, 0x00109787, 0x4a025a06, 0x00000000, + 0x8c040d1e, 0x04000027, 0x41780800, 0x497a5c09, + 0x592c1c09, 0x59300011, 0x59341200, 0x497a6205, + 0x8c08150e, 0x0402006e, 0x4807c857, 0x4806580a, + 0x80000d40, 0x04020f04, 0x59300402, 0x48025c06, + 0x48065807, 0x4a025a04, 0x00000103, 0x4c040000, + 0x4c0c0000, 0x4c100000, 0x0201f800, 0x0010959c, + 0x5c002000, 0x5c001800, 0x5c000800, 0x8c102512, + 0x0402001a, 0x4c0c0000, 0x0201f800, 0x000202c1, + 0x0201f800, 0x001049b2, 0x5c001800, 0x8c0c1d18, + 0x02000000, 0x0002077d, 0x0201f000, 0x001091d1, + 0x4813c857, 0x8c102518, 0x0400004b, 0x41780800, + 0x592c1c09, 0x820c0580, 0x00001000, 0x040007d6, + 0x8c102512, 0x040007d4, 0x592c7809, 0x583c080a, + 0x583c1c09, 0x0401f7d0, 0x4807c857, 0x592c7809, + 0x59300402, 0x592c1404, 0x8c08151e, 0x0402000d, + 0x592c1206, 0x48007c06, 0x48047807, 0x48087a06, + 0x84102512, 0x48107c08, 0x4c0c0000, 0x0201f800, + 0x001007fd, 0x403e5800, 0x0401faca, 0x0401f7d9, + 0x48025c06, 0x48065807, 0x583c080c, 0x583c000b, + 0x80040c00, 0x82041480, 0x0000001d, 0x04001006, + 0x583c1001, 0x480a5801, 0x49787801, 0x42000800, + 0x0000001c, 0x82040c00, 0x00000014, 0x4c0c0000, + 0x4c500000, 0x4c540000, 0x823ca400, 0x00000008, + 0x832cac00, 0x00000008, 0x4c100000, 0x4c3c0000, + 0x0401facb, 0x5c007800, 0x5c002000, 0x5c00a800, + 0x5c00a000, 0x84102512, 0x48125c08, 0x403e5800, + 0x0201f800, 0x001007fd, 0x42034000, 0x0010b4a4, + 0x59a1d81e, 0x80edd9c0, 0x02000800, 0x001005d8, + 0x48efc857, 0x58ec0009, 0x4803c857, 0x0801f800, + 0x0401f7ac, 0x4933c857, 0x1c01f000, 0x59301414, + 0x480bc857, 0x8c08151c, 0x0402000e, 0x80000540, + 0x4803c857, 0x0400078d, 0x80042c80, 0x0402178b, + 0x8c081514, 0x04020005, 0x592c080f, 0x4807c857, + 0x80040480, 0x48026016, 0x8408155c, 0x480a6414, + 0x59301007, 0x8408151e, 0x480a6007, 0x4a025c09, + 0x00000001, 0x0201f800, 0x0010959c, 0x497a5c09, + 0x8c102512, 0x04000006, 0x4d2c0000, 0x403e5800, + 0x0201f800, 0x001007fd, 0x5c025800, 0x82102500, + 0xffffedff, 0x48125c08, 0x0201f000, 0x0010920f, + 0x59325808, 0x592c0408, 0x8c000518, 0x04000004, + 0x412df800, 0x0201f000, 0x00100e6f, 0x1c01f000, + 0x4933c857, 0x59325808, 0x497a5c09, 0x4a025a06, + 0x00000000, 0x4a025a04, 0x00000103, 0x59300811, + 0x4807c857, 0x800409c0, 0x0402000a, 0x48065807, + 0x59300c02, 0x48065c06, 0x0201f800, 0x000202c1, + 0x0201f800, 0x001049b2, 0x0201f000, 0x0002077d, + 0x59340200, 0x8c00050e, 0x04020005, 0x59300811, + 0x0401fe55, 0x48065807, 0x0401f7f2, 0x592c0208, + 0x8c00050e, 0x040207fa, 0x4933c857, 0x0201f000, + 0x0010920f, 0x4933c857, 0x59325808, 0x812e59c0, + 0x02000800, 0x001005d8, 0x592c020a, 0x8c000502, + 0x02000800, 0x001005d8, 0x4a026206, 0x00000002, + 0x1c01f000, 0x5930001c, 0x800001c0, 0x02020800, + 0x0010984e, 0x59300007, 0x4933c857, 0x4803c857, + 0x8c00050e, 0x04000037, 0x8c000500, 0x04000029, + 0x8c00051c, 0x0400000a, 0x84000500, 0x48026007, + 0x59325808, 0x592c3c08, 0x481fc857, 0x841c3d58, + 0x481e5c08, 0x0201f000, 0x000207dd, 0x59325808, + 0x592c3c08, 0x841c3d58, 0x59300007, 0x8c00051c, + 0x040207f2, 0x481e5c08, 0x42000000, 0x00000005, + 0x40000000, 0x80000040, 0x040207fe, 0x59300007, + 0x8c00051c, 0x040207e9, 0x592c0204, 0x82000500, + 0x000000ff, 0x82000580, 0x00000048, 0x04020003, + 0x497a580b, 0x0401f002, 0x497a5c09, 0x481e5c08, + 0x4a025a06, 0x00000000, 0x0201f000, 0x00100e56, + 0x8c000524, 0x040007d9, 0x59325808, 0x4c000000, + 0x592c0408, 0x8c00051c, 0x5c000000, 0x04020003, + 0x4a026011, 0xffffffff, 0x84000524, 0x0401f7cf, + 0x1c01f000, 0x4933c857, 0x41780800, 0x83380480, + 0x00000058, 0x0402100b, 0x83380480, 0x00000040, + 0x04001008, 0x4d2c0000, 0x59325808, 0x812e59c0, + 0x0c020806, 0x5c025800, 0x0201f000, 0x0002077d, + 0x493bc857, 0x1c01f000, 0x001089ae, 0x001089ae, + 0x001089ae, 0x001089ae, 0x001089ae, 0x001089b0, + 0x001089ae, 0x001089ae, 0x001089ae, 0x001089ae, + 0x001089ae, 0x001089ae, 0x001089ae, 0x001089ae, + 0x001089ae, 0x001089ae, 0x001089ae, 0x001089ae, + 0x001089ae, 0x001089ae, 0x001089b5, 0x001089ae, + 0x001089ae, 0x001089ae, 0x0201f800, 0x001005d8, + 0x59cc0a08, 0x497a5807, 0x4807c857, 0x82040d00, + 0x00000fff, 0x59300402, 0x48025c06, 0x4a025a04, + 0x00000103, 0x48065c09, 0x4a025a06, 0x00000000, + 0x800409c0, 0x02000000, 0x000202c1, 0x59cc0009, + 0x4802580a, 0x82042500, 0x00000100, 0x04000002, + 0x59cc200b, 0x4812580c, 0x82040500, 0x00000200, + 0x04000002, 0x59cc000a, 0x4802580b, 0x80100c00, + 0x02001800, 0x001005d8, 0x02000000, 0x000202da, + 0x82041480, 0x0000001d, 0x04001006, 0x592c0404, + 0x8c00051e, 0x0400000e, 0x42000800, 0x0000001c, + 0x4c500000, 0x4c540000, 0x83cca400, 0x0000000c, + 0x832cac00, 0x0000000d, 0x0401f9c1, 0x5c00a800, + 0x5c00a000, 0x0201f000, 0x000202da, 0x0401f965, + 0x0401f1a0, 0x83380480, 0x00000093, 0x02021800, + 0x001005d8, 0x83380480, 0x00000085, 0x02001800, + 0x001005d8, 0x0c01f001, 0x001089fd, 0x001089fb, + 0x001089fb, 0x00108a04, 0x001089fb, 0x001089fb, + 0x001089fb, 0x001089fb, 0x001089fb, 0x001089fb, + 0x001089fb, 0x001089fb, 0x001089fb, 0x0201f800, + 0x001005d8, 0x4a026203, 0x00000001, 0x493a6403, + 0x42000800, 0x80000040, 0x0201f000, 0x00020721, + 0x4933c857, 0x59cc1204, 0x480a601c, 0x59cc1404, + 0x0201f800, 0x00109410, 0x0400001b, 0x591c0203, + 0x82000580, 0x00000000, 0x04000017, 0x591c0009, + 0x81340580, 0x04020014, 0x4d300000, 0x4d1c0000, + 0x411e6000, 0x0401f9c2, 0x5c023800, 0x5c026000, + 0x0400000b, 0x59cc0005, 0x8c000500, 0x04020003, + 0x0401f98c, 0x0401f003, 0x4a023a03, 0x00000002, + 0x4a026403, 0x00000086, 0x0401f005, 0x0401f9a6, + 0x040007f5, 0x4a026403, 0x00000087, 0x4a026203, + 0x00000001, 0x42000800, 0x80000040, 0x0201f800, + 0x00020721, 0x59340200, 0x8c00050e, 0x0400000d, + 0x59cc1404, 0x0201f800, 0x00109410, 0x04000009, + 0x591c0414, 0x8c00051a, 0x04000006, 0x4d300000, + 0x411e6000, 0x0201f800, 0x0010921e, 0x5c026000, + 0x1c01f000, 0x83380580, 0x00000013, 0x0402000a, + 0x59300403, 0x82000d80, 0x00000086, 0x04000012, + 0x82000d80, 0x00000087, 0x02020800, 0x001005d8, + 0x0401f00d, 0x83380580, 0x00000027, 0x04000005, + 0x83380580, 0x00000014, 0x02020800, 0x001005d8, + 0x493bc857, 0x0201f800, 0x00106bbf, 0x0201f000, + 0x00107911, 0x4933c857, 0x0201f000, 0x00107911, + 0x83380580, 0x00000013, 0x04020005, 0x59300403, + 0x82000480, 0x00000085, 0x0c01f04d, 0x83380580, + 0x00000027, 0x04020041, 0x4933c857, 0x0201f800, + 0x00106bbf, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42003000, 0x00000015, + 0x41782800, 0x42002000, 0x00000003, 0x42028000, + 0x00000029, 0x4d400000, 0x4d440000, 0x59368c03, + 0x0201f800, 0x0010985e, 0x5c028800, 0x5c028000, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00109037, 0x0400000c, 0x4d2c0000, + 0x59325808, 0x4a025a04, 0x00000103, 0x59300402, + 0x48025c06, 0x497a5c09, 0x49425a06, 0x0201f800, + 0x000202da, 0x5c025800, 0x0201f800, 0x0010912a, + 0x0201f000, 0x0002077d, 0x83380580, 0x00000089, + 0x04000005, 0x83380580, 0x0000008a, 0x02020000, + 0x00107974, 0x0201f800, 0x00106f60, 0x02020000, + 0x00107974, 0x59300a03, 0x82040580, 0x0000000a, + 0x0400002a, 0x82040580, 0x0000000c, 0x04000027, + 0x0201f800, 0x001005d8, 0x83380580, 0x00000014, + 0x040207ea, 0x4933c857, 0x0201f800, 0x00106bbf, + 0x42028000, 0x00000006, 0x0401f7d2, 0x00108aba, + 0x00108ab8, 0x00108ab8, 0x00108ab8, 0x00108ab8, + 0x00108ab8, 0x00108ac0, 0x00108ab8, 0x00108ab8, + 0x00108ab8, 0x00108ab8, 0x00108ab8, 0x00108ab8, + 0x0201f800, 0x001005d8, 0x4933c857, 0x59a80037, + 0x48026206, 0x4a026203, 0x0000000a, 0x1c01f000, + 0x4933c857, 0x59a80037, 0x48026206, 0x4a026203, + 0x0000000c, 0x1c01f000, 0x83380580, 0x00000089, + 0x04000008, 0x83380580, 0x0000008a, 0x04000032, + 0x4933c857, 0x493bc857, 0x0201f000, 0x00107974, + 0x4933c857, 0x59325808, 0x59300a1d, 0x82040580, + 0x00000003, 0x04020004, 0x0201f800, 0x001049b2, + 0x0401f00c, 0x5930021d, 0x82000580, 0x00000001, + 0x04020008, 0x59300c16, 0x82040580, 0x00000039, + 0x0400002c, 0x82040580, 0x00000035, 0x04000029, + 0x4c340000, 0x41306800, 0x0201f800, 0x0002075a, + 0x04000010, 0x4a026203, 0x00000001, 0x4a026403, + 0x0000001e, 0x59cc0c07, 0x48066419, 0x59cc0a07, + 0x48066219, 0x49366009, 0x4a026406, 0x00000001, + 0x42000800, 0x80000040, 0x0201f800, 0x00020721, + 0x40366000, 0x0201f800, 0x0002077d, 0x5c006800, + 0x1c01f000, 0x4933c857, 0x5930021d, 0x82000580, + 0x00000001, 0x04020040, 0x59300c16, 0x82040580, + 0x00000035, 0x04000007, 0x82040580, 0x0000001e, + 0x04000004, 0x82040580, 0x00000039, 0x04020036, + 0x4933c857, 0x4c500000, 0x4d1c0000, 0x4130a000, + 0x40067000, 0x0201f800, 0x001093ba, 0x04020029, + 0x0201f800, 0x0002075a, 0x04000026, 0x491fc857, + 0x4933c857, 0x83380580, 0x00000035, 0x04000004, + 0x83380580, 0x00000039, 0x04020002, 0x4932381c, + 0x493a6403, 0x4a026203, 0x00000001, 0x4a026406, + 0x00000001, 0x58500809, 0x4807c857, 0x48066009, + 0x58500c15, 0x4807c857, 0x48066415, 0x58500a15, + 0x4807c857, 0x48066215, 0x58500a16, 0x4807c857, + 0x48066216, 0x58500c19, 0x4807c857, 0x48066419, + 0x58500a19, 0x4807c857, 0x48066219, 0x491e601e, + 0x42000800, 0x80000040, 0x0201f800, 0x00020721, + 0x40526000, 0x5c023800, 0x5c00a000, 0x0201f000, + 0x0002077d, 0x5930021d, 0x82000580, 0x00000003, + 0x02000800, 0x001049b2, 0x0201f000, 0x0002077d, + 0x4803c856, 0x4c500000, 0x4c540000, 0x412c7800, + 0x4c3c0000, 0x42002800, 0x00000001, 0x82040480, + 0x00000101, 0x04001003, 0x42000800, 0x00000100, + 0x40043000, 0x42000800, 0x0000001c, 0x83cca400, + 0x0000000c, 0x832cac00, 0x0000000d, 0x0401f844, + 0x82183480, 0x0000001c, 0x592e5801, 0x812e59c0, + 0x02020800, 0x001007fd, 0x0201f800, 0x001007e4, + 0x04000017, 0x80142800, 0x4a025a04, 0x00000110, + 0x497a5c04, 0x492c7801, 0x82180c80, 0x0000003d, + 0x04021006, 0x40180800, 0x832cac00, 0x00000005, + 0x0401f82f, 0x0401f00a, 0x82183480, 0x0000003c, + 0x42000800, 0x0000003c, 0x412c7800, 0x832cac00, + 0x00000005, 0x0401f826, 0x0401f7e8, 0x5c007800, + 0x841429c0, 0x82142d40, 0x00000003, 0x48147a04, + 0x403e5800, 0x5c00a800, 0x5c00a000, 0x1c01f000, + 0x492fc857, 0x812e59c0, 0x0400000f, 0x4d2c0000, + 0x4c3c0000, 0x592c7801, 0x803c79c0, 0x04000006, + 0x497a5801, 0x0201f800, 0x000202da, 0x403e5800, + 0x0401f7f9, 0x5c007800, 0x0201f800, 0x000202da, + 0x5c025800, 0x1c01f000, 0x4803c856, 0x4c580000, + 0x82040c00, 0x00000003, 0x8004b104, 0x0201f800, + 0x0010ab17, 0x5c00b000, 0x1c01f000, 0x4803c856, + 0x4c580000, 0x82040c00, 0x00000003, 0x8004b104, + 0x0201f800, 0x0010ab17, 0x5c00b000, 0x1c01f000, + 0x591c0c06, 0x82040580, 0x00000003, 0x04000004, + 0x82040580, 0x00000002, 0x0402001a, 0x4d300000, + 0x4d2c0000, 0x411e6000, 0x59325808, 0x0201f800, + 0x00109037, 0x0400000f, 0x4d400000, 0x42028000, + 0x00000013, 0x592c0a08, 0x84040d54, 0x0201f800, + 0x00104e70, 0x5c028000, 0x0201f800, 0x0010959c, + 0x0201f800, 0x000202da, 0x0201f800, 0x0010912a, + 0x0201f800, 0x00107911, 0x5c025800, 0x5c026000, + 0x1c01f000, 0x59cc0005, 0x8c000500, 0x0402000b, + 0x591c0406, 0x82000580, 0x00000002, 0x04020007, + 0x591c0c03, 0x82040580, 0x00000085, 0x04000003, + 0x82040580, 0x0000008b, 0x1c01f000, 0x4933c857, + 0x4d3c0000, 0x42027800, 0x00000002, 0x59300406, + 0x82000c80, 0x00000012, 0x02021800, 0x001005d8, + 0x0c01f80a, 0x5c027800, 0x1c01f000, 0x4933c857, + 0x59300406, 0x82000c80, 0x00000012, 0x02021800, + 0x001005d8, 0x0c01f001, 0x00108c01, 0x00108bfe, + 0x00108bfe, 0x00108c29, 0x00108bfc, 0x00108bfe, + 0x00108c1a, 0x00108bfe, 0x00108bfc, 0x001065f4, + 0x00108bfe, 0x00108bfe, 0x00108bfe, 0x00108bfc, + 0x00108bfc, 0x00108bfc, 0x00108cf9, 0x00108bfe, + 0x0201f800, 0x001005d8, 0x4803c856, 0x80000580, + 0x1c01f000, 0x4803c856, 0x8d3e7d02, 0x04020016, + 0x0201f800, 0x00109037, 0x0400000f, 0x59325808, + 0x41780800, 0x4d400000, 0x42028000, 0x00000005, + 0x0201f800, 0x00104e70, 0x5c028000, 0x0201f800, + 0x0010959c, 0x0201f800, 0x001091cc, 0x0201f800, + 0x000202da, 0x0201f800, 0x00107911, 0x82000540, + 0x00000001, 0x1c01f000, 0x4933c857, 0x0201f800, + 0x001048d9, 0x0402000c, 0x4d400000, 0x42028000, + 0x00000010, 0x0201f800, 0x0010a1d1, 0x4a026406, + 0x00000006, 0x4a026203, 0x00000007, 0x5c028000, + 0x1c01f000, 0x4933c857, 0x0201f800, 0x00106c55, + 0x4df00000, 0x0401f8b8, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x0c01f001, 0x00108c43, + 0x00108cb0, 0x00108c5a, 0x00108cc3, 0x00108cab, + 0x00108c41, 0x00108c43, 0x00108c43, 0x00108c47, + 0x00108c43, 0x00108c43, 0x00108c43, 0x00108c43, + 0x00108c5a, 0x0201f800, 0x001005d8, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x0401f7b8, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x59300406, 0x82000580, + 0x00000003, 0x040207b4, 0x59300203, 0x82000580, + 0x0000000d, 0x040007b0, 0x8d3e7d02, 0x040207ae, + 0x4d340000, 0x59326809, 0x0201f800, 0x001049b2, + 0x5c026800, 0x0401f7a8, 0x59300004, 0x8400055c, + 0x48026004, 0x0201f800, 0x00106c4b, 0x59300406, + 0x82000580, 0x00000006, 0x04000043, 0x8d3e7d02, + 0x04020041, 0x497a621d, 0x59300203, 0x82000580, + 0x0000000d, 0x04000003, 0x4a02621d, 0x00000003, + 0x0401fbcb, 0x04000024, 0x4d2c0000, 0x4d400000, + 0x59325808, 0x0201f800, 0x001091cc, 0x592c0408, + 0x8c000512, 0x04000009, 0x4d2c0000, 0x84000512, + 0x48025c08, 0x592c0809, 0x40065800, 0x0201f800, + 0x001007fd, 0x5c025800, 0x4d400000, 0x42028000, + 0x00000005, 0x592c0a08, 0x8c040d0e, 0x04000004, + 0x42028000, 0x00000002, 0x0401f001, 0x0201f800, + 0x00104e70, 0x5c028000, 0x0201f800, 0x0010959c, + 0x0201f800, 0x000202da, 0x497a6008, 0x5c028000, + 0x5c025800, 0x8d3e7d00, 0x04000009, 0x4d340000, + 0x59326809, 0x0201f800, 0x001049b2, 0x5c026800, + 0x0201f800, 0x00107911, 0x0401f00b, 0x4a026403, + 0x00000085, 0x4a026203, 0x00000009, 0x4a026406, + 0x00000002, 0x42000800, 0x8000404b, 0x0201f800, + 0x00020721, 0x5c03e000, 0x02020800, 0x00106c55, + 0x82000540, 0x00000001, 0x1c01f000, 0x0201f800, + 0x00106c4b, 0x0201f800, 0x00100e99, 0x0401f7ab, + 0x598c000d, 0x81300580, 0x04020004, 0x0201f800, + 0x00106e8e, 0x0402001b, 0x0201f800, 0x001068d3, + 0x04020006, 0x59300c03, 0x82040580, 0x00000040, + 0x0400078b, 0x0401f79d, 0x0201f800, 0x00106b6c, + 0x04000010, 0x0201f800, 0x001005d8, 0x0401f813, + 0x04020004, 0x0201f800, 0x00106e62, 0x04020009, + 0x0201f800, 0x001067ae, 0x040207f4, 0x59300c03, + 0x82040580, 0x00000040, 0x04000779, 0x0401f78b, + 0x59300203, 0x82000c80, 0x0000000e, 0x02021800, + 0x001005d8, 0x0c01f75e, 0x417a3000, 0x42032000, + 0x0000bf32, 0x59900004, 0x81300580, 0x04000009, + 0x83932400, 0x00000010, 0x811a3000, 0x83180480, + 0x00000005, 0x040017f8, 0x82000540, 0x00000001, + 0x1c01f000, 0x59300004, 0x8c00053e, 0x04000010, + 0x8c00050c, 0x0402000e, 0x8c000516, 0x04020006, + 0x82000d00, 0x0000001f, 0x82040580, 0x00000005, + 0x04020004, 0x42000000, 0x00000003, 0x0401f005, + 0x42000000, 0x00000001, 0x0401f002, 0x59300203, + 0x1c01f000, 0x4933c857, 0x0201f800, 0x00106c55, + 0x4df00000, 0x59300203, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x0c01f001, 0x00108d13, + 0x00108d30, 0x00108d17, 0x00108d11, 0x00108d11, + 0x00108d11, 0x00108d11, 0x00108d11, 0x00108d11, + 0x00108d11, 0x00108d11, 0x00108d11, 0x00108d11, + 0x00108d11, 0x0201f800, 0x001005d8, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x0401f6e8, 0x5c03e000, + 0x02000800, 0x00106c4b, 0x4d2c0000, 0x59325808, + 0x59300403, 0x82000580, 0x00000052, 0x02000800, + 0x00101231, 0x0401fb16, 0x02000800, 0x001005d8, + 0x4a025a06, 0x00000005, 0x0201f800, 0x000202da, + 0x0201f800, 0x00104c19, 0x0201f800, 0x00107911, + 0x5c025800, 0x82000540, 0x00000001, 0x1c01f000, + 0x598c000d, 0x81300580, 0x0402001a, 0x59300004, + 0x8c000520, 0x04000004, 0x84000520, 0x48026004, + 0x0401f01a, 0x42001000, 0x0010b7f6, 0x50081000, + 0x58080002, 0x82000580, 0x00000100, 0x0400000a, + 0x5808000c, 0x81300580, 0x02020800, 0x001005d8, + 0x0201f800, 0x001068d3, 0x02020800, 0x001005d8, + 0x0401f7cf, 0x0201f800, 0x00106e8e, 0x0402000c, + 0x59300004, 0x8c000520, 0x04000004, 0x84000520, + 0x48026004, 0x0401f7c6, 0x0201f800, 0x001068d3, + 0x040007c3, 0x0201f800, 0x001005d8, 0x59300203, + 0x82000c80, 0x0000000e, 0x02021800, 0x001005d8, + 0x0c01f7a7, 0x59300406, 0x4933c857, 0x4803c857, + 0x82000c80, 0x00000012, 0x02021800, 0x001005d8, + 0x0c01f001, 0x00108d7c, 0x00108e41, 0x00108f79, + 0x00108d88, 0x00107911, 0x00108d7c, 0x0010a1c0, + 0x0002077d, 0x00108e41, 0x001065ce, 0x00108fda, + 0x00108d77, 0x00108d77, 0x00108d77, 0x00108d77, + 0x00108d77, 0x001096eb, 0x001096eb, 0x0201f800, + 0x001005d8, 0x0401fbd5, 0x02000000, 0x0010801c, + 0x1c01f000, 0x0201f800, 0x00106c55, 0x0201f800, + 0x00106bbf, 0x0201f800, 0x00106c4b, 0x0201f000, + 0x0002077d, 0x4a026206, 0x00000001, 0x1c01f000, + 0x42000000, 0x0010b872, 0x0201f800, 0x0010aa47, + 0x4d2c0000, 0x4d400000, 0x417a5800, 0x0401faa8, + 0x04000007, 0x59325808, 0x592c0208, 0x8400054c, + 0x48025a08, 0x42028000, 0x00000006, 0x0201f800, + 0x00106c55, 0x0401ff4c, 0x4803c857, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x0c01f806, + 0x0201f800, 0x00106c4b, 0x5c028000, 0x5c025800, + 0x1c01f000, 0x00108e40, 0x00108db5, 0x00108dc3, + 0x00108de5, 0x00108e11, 0x00108db3, 0x00108d7c, + 0x00108d7c, 0x00108d7c, 0x00108db3, 0x00108db3, + 0x00108db3, 0x00108db3, 0x00108dc3, 0x0201f800, + 0x001005d8, 0x598c000d, 0x81300580, 0x04020004, + 0x0201f800, 0x00106e8e, 0x04020038, 0x0201f800, + 0x001068d3, 0x0400003b, 0x0201f800, 0x00106b6c, + 0x04000032, 0x0201f800, 0x001005d8, 0x497a621d, + 0x812e59c0, 0x02000800, 0x001005d8, 0x592c0204, + 0x82000500, 0x000000ff, 0x82000580, 0x00000014, + 0x04000003, 0x4a02621d, 0x00000003, 0x592c0a08, + 0x0201f800, 0x00104e70, 0x0201f800, 0x0010959c, + 0x0201f800, 0x000202da, 0x497a6008, 0x4a026403, + 0x00000085, 0x4a026203, 0x00000009, 0x4a026406, + 0x00000002, 0x4a026004, 0x8000404b, 0x0201f800, + 0x00106c4b, 0x42000800, 0x8000404b, 0x0201f000, + 0x00020721, 0x0401fef1, 0x04020004, 0x0201f800, + 0x00106e62, 0x04020009, 0x0201f800, 0x001067ae, + 0x040207d2, 0x59300c03, 0x82040580, 0x00000040, + 0x04000008, 0x0401f7d2, 0x59300203, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x0c01f7ae, + 0x0201f800, 0x00106c4b, 0x812e59c0, 0x04000013, + 0x592c0a08, 0x0201f800, 0x00104e70, 0x0201f800, + 0x0010959c, 0x0201f800, 0x000202da, 0x59300203, + 0x82000580, 0x0000000d, 0x04000008, 0x0201f800, + 0x00106c4b, 0x4d340000, 0x59326809, 0x0201f800, + 0x001049b2, 0x5c026800, 0x0201f800, 0x00107911, + 0x0401f030, 0x812e59c0, 0x02000800, 0x001005d8, + 0x0201f800, 0x0010940a, 0x04020004, 0x0201f800, + 0x00100e99, 0x0401f7aa, 0x0201f800, 0x00106c4b, + 0x592c0208, 0x8400050c, 0x48025a08, 0x592c0406, + 0x800000c2, 0x800008c4, 0x80040c00, 0x48066206, + 0x42000000, 0x10000000, 0x41300800, 0x0201f800, + 0x00100b94, 0x0400000d, 0x592c0208, 0x8c00051c, + 0x04020006, 0x8400055c, 0x48025a08, 0x4a026206, + 0x00000002, 0x0401f00f, 0x4d300000, 0x0201f800, + 0x001012e5, 0x5c026000, 0x59300203, 0x82000580, + 0x00000004, 0x04020007, 0x4d380000, 0x42027000, + 0x00000048, 0x0201f800, 0x000207a1, 0x5c027000, + 0x1c01f000, 0x42000000, 0x0010b86e, 0x0201f800, + 0x0010aa47, 0x59300203, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x4803c857, 0x0c01f001, + 0x00108e5a, 0x00108d85, 0x00108e5c, 0x00108e5a, + 0x00108e5c, 0x00108e5c, 0x00108d7d, 0x00108e5a, + 0x00108d79, 0x00108e5a, 0x00108e5a, 0x00108e5a, + 0x00108e5a, 0x00108e5a, 0x0201f800, 0x001005d8, + 0x4d340000, 0x4d2c0000, 0x59326809, 0x59340400, + 0x82000500, 0x000000ff, 0x82000c80, 0x0000000c, + 0x02021800, 0x001005d8, 0x59303403, 0x82180d80, + 0x00000004, 0x04020004, 0x42000000, 0x00000001, + 0x0401f006, 0x82180d80, 0x00000000, 0x04020003, + 0x42000000, 0x00000001, 0x4803c857, 0x0c01f804, + 0x5c025800, 0x5c026800, 0x1c01f000, 0x00108e83, + 0x00108f22, 0x00108e85, 0x00108eba, 0x00108e85, + 0x00108f3f, 0x00108e85, 0x00108e8f, 0x00108e83, + 0x00108f3f, 0x00108e83, 0x00108e9e, 0x0201f800, + 0x001005d8, 0x59300403, 0x82000d80, 0x00000016, + 0x0400002e, 0x82000d80, 0x00000004, 0x0400002b, + 0x82000d80, 0x00000002, 0x04000028, 0x0401fabf, + 0x04000079, 0x59300403, 0x82000d80, 0x00000022, + 0x040000ae, 0x82000d80, 0x00000039, 0x040000b3, + 0x82000d80, 0x00000035, 0x040000b0, 0x82000d80, + 0x0000001e, 0x0400001b, 0x0401f999, 0x04000007, + 0x0201f800, 0x00109597, 0x04020004, 0x0201f800, + 0x00104a14, 0x0401f011, 0x59300403, 0x82000d80, + 0x00000001, 0x04020004, 0x0201f800, 0x001049e7, + 0x0400000a, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x0010801c, + 0x0201f000, 0x00107911, 0x0401f97d, 0x04000004, + 0x0201f800, 0x00109597, 0x040000a9, 0x59300c03, + 0x82040580, 0x00000016, 0x04000056, 0x82040580, + 0x00000002, 0x04020034, 0x59a80026, 0x8c000502, + 0x04020013, 0x0201f800, 0x0010513b, 0x04020010, + 0x0201f800, 0x00105151, 0x04020006, 0x42000000, + 0x00000001, 0x0201f800, 0x00105113, 0x0401f094, + 0x4a035033, 0x00000001, 0x4202d800, 0x00000001, + 0x0201f800, 0x001050a2, 0x0401f08d, 0x59340403, + 0x82000580, 0x000007fc, 0x04000008, 0x59a80026, + 0x8c00050a, 0x04020084, 0x59340212, 0x82000500, + 0x0000ff00, 0x04000082, 0x59340412, 0x82000500, + 0x000000ff, 0x04000010, 0x80000040, 0x48026c12, + 0x497a6008, 0x4a026406, 0x00000007, 0x4a026206, + 0x00000398, 0x497a6205, 0x0201f800, 0x0002075a, + 0x04000005, 0x49366009, 0x4a026406, 0x00000001, + 0x0401f020, 0x59300403, 0x82000d80, 0x00000002, + 0x0402000d, 0x59340403, 0x82000580, 0x000007fe, + 0x04020009, 0x59a80026, 0x84000540, 0x48035026, + 0x0201f800, 0x00104237, 0x0201f800, 0x0010801c, + 0x0401f00c, 0x0201f800, 0x0010801c, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x0010203c, 0x5c027800, + 0x42000000, 0x0010b864, 0x0201f800, 0x0010aa47, + 0x0201f800, 0x00102074, 0x0201f000, 0x00107911, + 0x42000800, 0x00000003, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000002, + 0x0201f000, 0x0010672b, 0x0401f915, 0x04020793, + 0x0201f800, 0x00102074, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x0010203c, 0x5c027800, 0x42000000, + 0x0010b864, 0x0201f800, 0x0010aa47, 0x42003000, + 0x00000018, 0x41782800, 0x42002000, 0x00000000, + 0x4d400000, 0x4d440000, 0x59368c03, 0x42028000, + 0x00000029, 0x0201f800, 0x0010985e, 0x5c028800, + 0x5c028000, 0x0201f000, 0x00107911, 0x0201f800, + 0x00104a14, 0x0401f7c8, 0x42000000, 0x0010b86d, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x00107b76, + 0x040207c1, 0x1c01f000, 0x4d380000, 0x59327403, + 0x0201f800, 0x001093ba, 0x5c027000, 0x02020000, + 0x0002077d, 0x836c0580, 0x00000003, 0x04000004, + 0x4a026206, 0x00000002, 0x1c01f000, 0x59300403, + 0x48026416, 0x4a02621d, 0x00000001, 0x4a026403, + 0x00000085, 0x4a026203, 0x00000009, 0x4a026406, + 0x00000002, 0x42000800, 0x8000004b, 0x0201f000, + 0x00020721, 0x0201f800, 0x00102074, 0x0201f800, + 0x0010801c, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x497a6008, 0x4a026406, + 0x00000007, 0x4a026206, 0x00000398, 0x497a6205, + 0x1c01f000, 0x42000000, 0x0010b870, 0x0201f800, + 0x0010aa47, 0x4d340000, 0x59326809, 0x59300203, + 0x82000c80, 0x0000000e, 0x02021800, 0x001005d8, + 0x4803c857, 0x0c01f803, 0x5c026800, 0x1c01f000, + 0x00108f96, 0x00108d85, 0x00108f96, 0x00108f96, + 0x00108f96, 0x00108f96, 0x00108f96, 0x00108f96, + 0x00108f96, 0x00108d85, 0x00108f98, 0x00108d85, + 0x00108fa0, 0x00108f96, 0x0201f800, 0x001005d8, + 0x4a026403, 0x0000008b, 0x4a026203, 0x0000000b, + 0x42000800, 0x8000404b, 0x0201f000, 0x00020721, + 0x59300a1d, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42003000, 0x00000011, + 0x0201f800, 0x0010a942, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x41306800, 0x0201f800, + 0x0002075a, 0x04000008, 0x49366009, 0x4d300000, + 0x40366000, 0x0201f800, 0x00107911, 0x5c026000, + 0x0401f002, 0x40366000, 0x497a6008, 0x4a026406, + 0x00000001, 0x4a026403, 0x00000001, 0x0201f800, + 0x00103b25, 0x04000011, 0x4a026406, 0x00000004, + 0x4a026203, 0x00000007, 0x4a026420, 0x00000001, + 0x42003000, 0x00000004, 0x4d400000, 0x42028000, + 0x00000029, 0x41782800, 0x0201f800, 0x0010a43e, + 0x5c028000, 0x1c01f000, 0x42000800, 0x0000000b, + 0x0201f800, 0x00104571, 0x4a026203, 0x00000001, + 0x0201f000, 0x0010672b, 0x42000000, 0x0010b876, + 0x0201f800, 0x0010aa47, 0x59300203, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x4803c857, + 0x0c01f001, 0x0010900b, 0x00108ff3, 0x00108ff7, + 0x0010900c, 0x00108ff5, 0x00108ff3, 0x00108ff3, + 0x00108ff3, 0x00108ff3, 0x00108ff3, 0x00108ff3, + 0x00108ff3, 0x00108ff3, 0x00108ff3, 0x0201f800, + 0x001005d8, 0x0201f800, 0x00100e99, 0x4d2c0000, + 0x59325808, 0x4a025a06, 0x00000006, 0x0201f800, + 0x000202da, 0x5c025800, 0x497a6008, 0x4a02621d, + 0x0000000a, 0x4a026403, 0x00000085, 0x4a026203, + 0x00000009, 0x4a026406, 0x00000002, 0x42000800, + 0x8000404b, 0x0201f000, 0x00020721, 0x1c01f000, + 0x0201f800, 0x00106c55, 0x4df00000, 0x0401fcc7, + 0x04020004, 0x0201f800, 0x00106e62, 0x0402000c, + 0x0201f800, 0x001067ae, 0x04020005, 0x5c03e000, + 0x0201f800, 0x00106c4b, 0x0401f7dd, 0x0201f800, + 0x00106b6c, 0x02020800, 0x001005d8, 0x5c03e000, + 0x0201f800, 0x00106c4b, 0x59300203, 0x82000d80, + 0x00000003, 0x02000800, 0x001005d8, 0x82000c80, + 0x0000000e, 0x02021800, 0x001005d8, 0x0c01f7ba, + 0x4803c856, 0x59a8000e, 0x59a80867, 0x80040400, + 0x80080480, 0x04021004, 0x82000540, 0x00000001, + 0x1c01f000, 0x80000580, 0x1c01f000, 0x4803c856, + 0x4c080000, 0x59301008, 0x82081500, 0xfff00000, + 0x5c001000, 0x1c01f000, 0x4803c856, 0x4d300000, + 0x0201f800, 0x0002075a, 0x0400000a, 0x0401f82f, + 0x4d380000, 0x42027000, 0x0000004b, 0x0201f800, + 0x000207a1, 0x5c027000, 0x82000540, 0x00000001, + 0x5c026000, 0x1c01f000, 0x4803c856, 0x4d300000, + 0x0201f800, 0x00107942, 0x0400001b, 0x0401f81f, + 0x4d300000, 0x0201f800, 0x00106c55, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x00106ab4, 0x0201f800, + 0x001067fd, 0x5c027800, 0x0201f800, 0x0010a2ff, + 0x0201f800, 0x00106c4b, 0x5c026000, 0x8d3e7d3e, + 0x0402000b, 0x4d380000, 0x42027000, 0x0000004c, + 0x0201f800, 0x000207a1, 0x5c027000, 0x82000540, + 0x00000001, 0x5c026000, 0x1c01f000, 0x0201f800, + 0x0002077d, 0x0401f7fa, 0x592c0407, 0x494a6017, + 0x494e6018, 0x49366009, 0x492e6008, 0x4a026406, + 0x00000003, 0x800000c2, 0x800008c4, 0x80040400, + 0x48026206, 0x1c01f000, 0x493bc857, 0x4d300000, + 0x0201f800, 0x0002075a, 0x0400000d, 0x0401ffef, + 0x4d400000, 0x42028000, 0x00000005, 0x0401f80d, + 0x5c028000, 0x8d3e7d3e, 0x04020007, 0x0201f800, + 0x000207a1, 0x82000540, 0x00000001, 0x5c026000, + 0x1c01f000, 0x0201f800, 0x0002077d, 0x0401f7fa, + 0x4803c856, 0x0201f800, 0x00106c55, 0x4d3c0000, + 0x4d440000, 0x59368c03, 0x42027800, 0x00000001, + 0x0201f800, 0x001069b6, 0x0201f800, 0x0010692e, + 0x0201f800, 0x001067fd, 0x0201f800, 0x0010a2ff, + 0x5c028800, 0x5c027800, 0x0201f000, 0x00106c4b, + 0x4803c856, 0x4d300000, 0x0201f800, 0x0002075a, + 0x0400000f, 0x481a601c, 0x48ee6021, 0x49366009, + 0x4a026406, 0x00000001, 0x492e6008, 0x4d380000, + 0x42027000, 0x0000001f, 0x0201f800, 0x000207a1, + 0x5c027000, 0x82000540, 0x00000001, 0x5c026000, + 0x1c01f000, 0x4803c856, 0x4d300000, 0x0201f800, + 0x0002075a, 0x0400000e, 0x48ee6021, 0x49366009, + 0x4a026406, 0x00000001, 0x492e6008, 0x4d380000, + 0x42027000, 0x00000055, 0x0201f800, 0x000207a1, + 0x5c027000, 0x82000540, 0x00000001, 0x5c026000, + 0x1c01f000, 0x4803c856, 0x4d300000, 0x0201f800, + 0x0002075a, 0x0400000f, 0x481a601c, 0x48ee6021, + 0x49366009, 0x4a026406, 0x00000001, 0x492e6008, + 0x4d380000, 0x42027000, 0x0000003d, 0x0201f800, + 0x000207a1, 0x5c027000, 0x82000540, 0x00000001, + 0x5c026000, 0x1c01f000, 0x4803c856, 0x4d300000, + 0x0201f800, 0x00107942, 0x04000014, 0x49366009, + 0x492fc857, 0x4933c857, 0x592c0404, 0x8c00051e, + 0x04000003, 0x48efc857, 0x48ee6021, 0x4a026406, + 0x00000001, 0x492e6008, 0x4d380000, 0x42027000, + 0x00000000, 0x0201f800, 0x000207a1, 0x5c027000, + 0x82000540, 0x00000001, 0x5c026000, 0x1c01f000, + 0x4803c856, 0x4d300000, 0x0201f800, 0x0002075a, + 0x0400000f, 0x48ee6021, 0x481a601c, 0x49366009, + 0x4a026406, 0x00000001, 0x492e6008, 0x4d380000, + 0x42027000, 0x00000044, 0x0201f800, 0x000207a1, + 0x5c027000, 0x82000540, 0x00000001, 0x5c026000, + 0x1c01f000, 0x4803c856, 0x4d300000, 0x0201f800, + 0x0002075a, 0x0400000f, 0x481a601c, 0x48ee6021, + 0x49366009, 0x4a026406, 0x00000001, 0x492e6008, + 0x4d380000, 0x42027000, 0x00000049, 0x0201f800, + 0x000207a1, 0x5c027000, 0x82000540, 0x00000001, + 0x5c026000, 0x1c01f000, 0x59300009, 0x80001540, + 0x02000800, 0x001005d8, 0x5808040b, 0x4803c856, + 0x80000040, 0x04001002, 0x4800140b, 0x1c01f000, + 0x4803c856, 0x59300403, 0x82000d80, 0x00000002, + 0x04000015, 0x82000d80, 0x00000003, 0x04000012, + 0x82000d80, 0x00000004, 0x0400000f, 0x82000d80, + 0x00000008, 0x0400000c, 0x82000d80, 0x0000000a, + 0x04000009, 0x599c0819, 0x8c040d0e, 0x04000004, + 0x82000d80, 0x00000000, 0x04000003, 0x82000540, + 0x00000001, 0x1c01f000, 0x4803c856, 0x4c000000, + 0x4d2c0000, 0x59300406, 0x82000580, 0x00000004, + 0x0400001d, 0x59300008, 0x80025d40, 0x800001c0, + 0x04000019, 0x0201f800, 0x00109597, 0x04000014, + 0x59300406, 0x82004580, 0x00000010, 0x04000010, + 0x82004580, 0x00000011, 0x0400000d, 0x82004580, + 0x00000003, 0x0400000c, 0x82004580, 0x00000002, + 0x04000009, 0x82004580, 0x0000000a, 0x04000006, + 0x592c0404, 0x8c00051e, 0x04000003, 0x80000580, + 0x0401f003, 0x82000540, 0x00000001, 0x5c025800, + 0x5c000000, 0x1c01f000, 0x4803c856, 0x4d300000, + 0x0201f800, 0x00107942, 0x04000013, 0x49366009, + 0x48ee6021, 0x4a026406, 0x00000001, 0x492e6008, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x0010203c, + 0x5c027800, 0x4d380000, 0x42027000, 0x00000028, + 0x0201f800, 0x000207a1, 0x5c027000, 0x82000540, + 0x00000001, 0x5c026000, 0x1c01f000, 0x4803c856, + 0x83380580, 0x00000015, 0x0402000d, 0x59a80016, + 0x82000580, 0x00000074, 0x04020009, 0x0201f800, + 0x0010462a, 0x4a026203, 0x00000001, 0x4a026403, + 0x00000029, 0x0201f000, 0x0010672b, 0x0201f800, + 0x0010801c, 0x0201f000, 0x0002077d, 0x4803c856, + 0x83380580, 0x00000016, 0x04020007, 0x42000800, + 0x00000004, 0x0201f800, 0x00104571, 0x0201f000, + 0x00107b38, 0x83380580, 0x00000015, 0x04020013, + 0x59a80016, 0x82000580, 0x00000014, 0x0402000f, + 0x0201f800, 0x0010468d, 0x0201f800, 0x0010846f, + 0x0402000a, 0x59340404, 0x80000540, 0x04000007, + 0x42000800, 0x00000006, 0x0201f800, 0x00104571, + 0x0201f000, 0x00107b38, 0x0201f800, 0x0010801c, + 0x0201f000, 0x0002077d, 0x4803c856, 0x592c0206, + 0x82000580, 0x00000005, 0x04000002, 0x1c01f000, + 0x4803c856, 0x592c0208, 0x8400054a, 0x48025a08, + 0x1c01f000, 0x497a6205, 0x497a6008, 0x4a026203, + 0x00000001, 0x4a026403, 0x00000050, 0x42000800, + 0x80000043, 0x0201f000, 0x00020721, 0x4933c857, + 0x4d340000, 0x59326809, 0x59340200, 0x8c00050e, + 0x04000006, 0x59300406, 0x82000c80, 0x00000012, + 0x04021004, 0x0c01f806, 0x5c026800, 0x1c01f000, + 0x0201f800, 0x00108d7c, 0x0401f7fc, 0x00108d7c, + 0x001091fd, 0x00109201, 0x00109204, 0x0010a49b, + 0x0010a4b8, 0x0010a4bc, 0x00108d7c, 0x00108d7c, + 0x00108d7c, 0x00108d7c, 0x00108d7c, 0x00108d7c, + 0x00108d7c, 0x00108d7c, 0x00108d7c, 0x00108d7c, + 0x00108d7c, 0x4803c856, 0x40000000, 0x40000000, + 0x1c01f000, 0x40000000, 0x40000000, 0x1c01f000, + 0x5930001c, 0x4803c857, 0x59300414, 0x4933c857, + 0x4803c857, 0x8c000502, 0x04000005, 0x84000502, + 0x84000540, 0x48026414, 0x1c01f000, 0x42000000, + 0xd0000000, 0x41300800, 0x0201f800, 0x00100b94, + 0x0401f80a, 0x04020008, 0x59a80037, 0x82000400, + 0x0000000a, 0x48026205, 0x59300414, 0x84000542, + 0x48026414, 0x1c01f000, 0x4933c857, 0x4d340000, + 0x59326809, 0x59340200, 0x8c00050e, 0x02000800, + 0x001005d8, 0x5930001c, 0x80000540, 0x0402002f, + 0x59a80021, 0x80000540, 0x0402002a, 0x4d1c0000, + 0x41323800, 0x0201f800, 0x0002075a, 0x04000023, + 0x4932381c, 0x591c0414, 0x84000542, 0x48023c14, + 0x49366009, 0x591c0406, 0x82000580, 0x00000003, + 0x04000006, 0x591c0202, 0x48026419, 0x591c0402, + 0x48026219, 0x0401f005, 0x591c0202, 0x48026219, + 0x591c0402, 0x48026419, 0x491e601e, 0x4a026406, + 0x00000001, 0x4a026403, 0x00000035, 0x4a026203, + 0x00000001, 0x42000800, 0x80000040, 0x0201f800, + 0x00020721, 0x411e6000, 0x5c023800, 0x80000580, + 0x5c026800, 0x1c01f000, 0x411e6000, 0x5c023800, + 0x59a80039, 0x48026205, 0x82000540, 0x00000001, + 0x0401f7f8, 0x4933c857, 0x4d2c0000, 0x4932381c, + 0x4a026202, 0x0000ffff, 0x591e5808, 0x591c0007, + 0x8c00051e, 0x04000005, 0x8400051e, 0x48023807, + 0x497a5c09, 0x0401f014, 0x592c0408, 0x8c000518, + 0x04000011, 0x84000518, 0x48025c08, 0x4a025c09, + 0x00000001, 0x0401fb2f, 0x497a5c09, 0x592c0408, + 0x8c000512, 0x04000008, 0x4d2c0000, 0x84000512, + 0x48025c08, 0x592e5809, 0x0201f800, 0x001007fd, + 0x5c025800, 0x59a80039, 0x48026205, 0x591c0214, + 0x48026216, 0x82000d80, 0x00000001, 0x04000008, + 0x4a023a03, 0x00000002, 0x82000580, 0x00000005, + 0x04000008, 0x497a6015, 0x0401f01e, 0x591c0007, + 0x84000540, 0x48023807, 0x4a023a03, 0x00000004, + 0x591c0414, 0x4803c857, 0x8400051c, 0x84000554, + 0x48023c14, 0x592c000f, 0x40001000, 0x591c0816, + 0x80040480, 0x040217f0, 0x591c0016, 0x82000500, + 0xfffffffc, 0x48026015, 0x48023816, 0x591c0a14, + 0x4807c857, 0x82040d80, 0x00000005, 0x04020005, + 0x480bc857, 0x4803c857, 0x4a023812, 0xffffffff, + 0x591c0402, 0x48026419, 0x591c0202, 0x48026219, + 0x591e6809, 0x49366009, 0x4a026406, 0x00000001, + 0x4a026403, 0x00000039, 0x4a026203, 0x00000001, + 0x42000800, 0x80000040, 0x0201f800, 0x00020721, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x59300414, + 0x8c000514, 0x04000015, 0x8c00051c, 0x04020012, + 0x59300016, 0x80100480, 0x04001006, 0x04000005, + 0x59300414, 0x84000514, 0x8400055c, 0x0401f009, + 0x48126016, 0x48126012, 0x40100000, 0x592c180f, + 0x800c0480, 0x48026011, 0x59300414, 0x84000514, + 0x48026414, 0x1c01f000, 0x4933c857, 0x8c00051c, + 0x04020006, 0x59300012, 0x48026016, 0x59300414, + 0x8400055c, 0x48026414, 0x1c01f000, 0x59300c03, + 0x4933c857, 0x4807c857, 0x82040480, 0x00000034, + 0x04001006, 0x82040480, 0x0000003c, 0x04021003, + 0x80000580, 0x1c01f000, 0x82000540, 0x00000001, + 0x0401f7fd, 0x41780800, 0x59a81035, 0x42000000, + 0x00000032, 0x0201f800, 0x001066a0, 0x800811c0, + 0x04020003, 0x42001000, 0x00000014, 0x480b5037, + 0x59a81036, 0x480b502d, 0x41780800, 0x42000000, + 0x00000064, 0x0201f800, 0x001066a0, 0x800811c0, + 0x04020003, 0x42001000, 0x00000014, 0x480b5038, + 0x82081400, 0x0000000a, 0x480b5039, 0x42000800, + 0x00000001, 0x0201f800, 0x00106c78, 0x42000000, + 0x30000000, 0x40080800, 0x0201f800, 0x00100b68, + 0x42000800, 0x00000003, 0x59a81010, 0x0201f800, + 0x00106c78, 0x0201f000, 0x00104906, 0x4a035037, + 0x00000028, 0x4a035038, 0x00000014, 0x4a03502d, + 0x000007d0, 0x42001000, 0x0000001e, 0x480b5039, + 0x42000800, 0x00000001, 0x0201f800, 0x00106c78, + 0x42000000, 0x30000000, 0x40080800, 0x0201f800, + 0x00100b68, 0x42000800, 0x00000003, 0x59a81010, + 0x0201f000, 0x00106c78, 0x4933c857, 0x4d2c0000, + 0x59300403, 0x82000580, 0x0000003e, 0x04020005, + 0x59325817, 0x812e59c0, 0x02020800, 0x001007f4, + 0x5c025800, 0x1c01f000, 0x4937c857, 0x4d300000, + 0x0201f800, 0x0002075a, 0x04000011, 0x49366009, + 0x4a026406, 0x00000001, 0x492e6008, 0x42000800, + 0x00000009, 0x0201f800, 0x00104571, 0x4d380000, + 0x42027000, 0x00000033, 0x0201f800, 0x000207a1, + 0x5c027000, 0x82000540, 0x00000001, 0x5c026000, + 0x1c01f000, 0x4933c857, 0x4d2c0000, 0x4c580000, + 0x4d3c0000, 0x59325808, 0x83380580, 0x00000015, + 0x04020022, 0x59a8b016, 0x82580c80, 0x00000019, + 0x04001003, 0x4200b000, 0x00000018, 0x8058b104, + 0x0401fa07, 0x80000580, 0x0401fa17, 0x832cac00, + 0x00000009, 0x83cca400, 0x00000006, 0x0201f800, + 0x0010ab17, 0x42027800, 0x00000001, 0x592c100a, + 0x8c081518, 0x04020006, 0x59a80010, 0x592c100d, + 0x80080580, 0x04020006, 0x417a7800, 0x59301009, + 0x58081403, 0x0201f800, 0x001020a1, 0x0201f800, + 0x00107b38, 0x0401f008, 0x4200b000, 0x00000002, + 0x0401fa09, 0x0201f800, 0x0010801c, 0x0201f800, + 0x0002077d, 0x5c027800, 0x5c00b000, 0x5c025800, + 0x1c01f000, 0x4933c856, 0x49366009, 0x4a026406, + 0x00000001, 0x492e6008, 0x4d380000, 0x42027000, + 0x0000004d, 0x0201f800, 0x000207a1, 0x5c027000, + 0x82000540, 0x00000001, 0x1c01f000, 0x4803c856, + 0x4d2c0000, 0x83380580, 0x00000015, 0x04020027, + 0x59a80816, 0x59325808, 0x5930040b, 0x800000c4, + 0x80040580, 0x04020021, 0x4c500000, 0x4c540000, + 0x4c580000, 0x83cca400, 0x00000006, 0x4050a800, + 0x5930b40b, 0x0201f800, 0x0010ab28, 0x83cca400, + 0x00000006, 0x592cb205, 0x832cac00, 0x00000006, + 0x0201f800, 0x0010ab17, 0x592e5801, 0x812e59c0, + 0x040207f9, 0x5931d821, 0x58ef400b, 0x58ee580d, + 0x4a025a04, 0x00000103, 0x58ec0009, 0x0801f800, + 0x59300402, 0x5c00b000, 0x5c00a800, 0x5c00a000, + 0x5c025800, 0x1c01f000, 0x0201f800, 0x0010801c, + 0x5c025800, 0x1c01f000, 0x4933c857, 0x83380580, + 0x00000035, 0x04000005, 0x59301419, 0x0401f851, + 0x04000027, 0x0401f006, 0x4d300000, 0x5932601e, + 0x0401f856, 0x5c026000, 0x04000020, 0x591c0c06, + 0x82040580, 0x00000003, 0x04000004, 0x82040580, + 0x00000006, 0x0402001c, 0x591c0c02, 0x59300419, + 0x80040580, 0x04000009, 0x59300219, 0x80040580, + 0x04020015, 0x591c0a02, 0x59300419, 0x80040580, + 0x04020011, 0x0401f009, 0x59300a19, 0x82040580, + 0x0000ffff, 0x04000005, 0x591c0202, 0x59300a19, + 0x80040580, 0x04020008, 0x591c0009, 0x59300809, + 0x80040580, 0x1c01f000, 0x417a3800, 0x82000540, + 0x00000001, 0x1c01f000, 0x4803c856, 0x59b800e4, + 0x8c000538, 0x02020800, 0x001005d8, 0x42000800, + 0x0000012c, 0x4a0370e4, 0x20000000, 0x59b800e4, + 0x80040840, 0x02000800, 0x001005d8, 0x8c00053c, + 0x040207f9, 0x4a0370e4, 0x30000000, 0x40000000, + 0x40000000, 0x40000000, 0x59b800e4, 0x8c00053c, + 0x040207f1, 0x1c01f000, 0x4803c856, 0x4a0370e4, + 0x20000000, 0x40000000, 0x59b800e4, 0x8c000538, + 0x040207fb, 0x1c01f000, 0x59300807, 0x8c040d1e, + 0x592c0c08, 0x04020002, 0x8c040d18, 0x1c01f000, + 0x0401fc1c, 0x04000008, 0x42000800, 0x00000024, + 0x0201f800, 0x00106681, 0x82063c00, 0x0010d1c0, + 0x491fc857, 0x1c01f000, 0x83300480, 0x0010d1c0, + 0x0400100a, 0x59a8000b, 0x81300480, 0x04021007, + 0x59301402, 0x0401ffef, 0x04000007, 0x411c0000, + 0x81300580, 0x04000003, 0x81780500, 0x0401f002, + 0x81300540, 0x1c01f000, 0x4947c857, 0x4d300000, + 0x0201f800, 0x00020245, 0x0402000a, 0x42026000, + 0x0010bde9, 0x49366009, 0x492e6008, 0x0201f800, + 0x0010203c, 0x80000580, 0x5c026000, 0x1c01f000, + 0x82000540, 0x00000001, 0x0401f7fc, 0x4933c857, + 0x0201f800, 0x00109037, 0x02000800, 0x001005d8, + 0x4d2c0000, 0x4d340000, 0x4d440000, 0x4c580000, + 0x59325808, 0x59326809, 0x49425a06, 0x0201f800, + 0x00105755, 0x592e8c06, 0x592c4207, 0x82200500, + 0x0000000f, 0x0c01f806, 0x5c00b000, 0x5c028800, + 0x5c026800, 0x5c025800, 0x1c01f000, 0x00109466, + 0x00109488, 0x0010948f, 0x00109493, 0x0010949c, + 0x00109463, 0x00109463, 0x00109463, 0x001094a0, + 0x001094ac, 0x001094ac, 0x00109463, 0x00109463, + 0x00109463, 0x00109463, 0x00109463, 0x4803c857, + 0x0201f800, 0x001005d8, 0x814281c0, 0x04020012, + 0x41785800, 0x592c0404, 0x8c00051c, 0x04020002, + 0x59345c05, 0x442c2800, 0x59340008, 0x48002802, + 0x59340009, 0x48002801, 0x59340006, 0x48002804, + 0x59340007, 0x48002803, 0x4200b000, 0x0000000b, + 0x0401f037, 0x592c0207, 0x8c00051e, 0x4200b000, + 0x00000002, 0x04020032, 0x8204b540, 0x00000000, + 0x0400002f, 0x44042800, 0x59326809, 0x59340400, + 0x48002801, 0x4200b000, 0x00000002, 0x0401f028, + 0x814281c0, 0x04020030, 0x59345c05, 0x442c2800, + 0x4200b000, 0x00000001, 0x0401f021, 0x8340b540, + 0x00000000, 0x0400001e, 0x0401f027, 0x814281c0, + 0x04020025, 0x59340200, 0x44002800, 0x59340001, + 0x48002801, 0x4200b000, 0x00000002, 0x0401f014, + 0x8340b540, 0x00000000, 0x0402001b, 0x0401f010, + 0x8340b540, 0x00000000, 0x0400000d, 0x0201f800, + 0x00104a1f, 0x04000014, 0x8c20450e, 0x04000002, + 0x497a6009, 0x4178b000, 0x497a5a06, 0x0401f004, + 0x8340b540, 0x00000000, 0x0402000b, 0x592c0404, + 0x8400051c, 0x48025c04, 0x592c0207, 0x8400051e, + 0x48025a07, 0x0401f8aa, 0x497a6008, 0x0201f000, + 0x000202da, 0x592c0207, 0x8c00051e, 0x4200b000, + 0x00000002, 0x040207f2, 0x8204b540, 0x00000000, + 0x040007ef, 0x44042800, 0x4200b000, 0x00000001, + 0x0401f7eb, 0x4937c857, 0x4d300000, 0x0201f800, + 0x0002075a, 0x04000011, 0x49366009, 0x4a026406, + 0x00000001, 0x492e6008, 0x42000800, 0x0000000b, + 0x0201f800, 0x00104571, 0x4d380000, 0x42027000, + 0x00000043, 0x0201f800, 0x000207a1, 0x5c027000, + 0x82000540, 0x00000001, 0x5c026000, 0x1c01f000, + 0x4937c857, 0x4d2c0000, 0x59325808, 0x83380580, + 0x00000015, 0x04020025, 0x59a80016, 0x82000580, + 0x00000004, 0x04020021, 0x59a80010, 0x592c1009, + 0x80080580, 0x04020010, 0x4d440000, 0x592e8c06, + 0x592c0207, 0x4803c856, 0x82000500, 0x00000080, + 0x84000548, 0x4d3c0000, 0x42027800, 0x00001000, + 0x0201f800, 0x001049bb, 0x5c027800, 0x5c028800, + 0x0401f004, 0x4803c856, 0x0201f800, 0x00104a1f, + 0x0201f800, 0x00109037, 0x04000017, 0x4d400000, + 0x42028000, 0x00000000, 0x41780800, 0x0401ff38, + 0x5c028000, 0x0401f00e, 0x0201f800, 0x00104a1f, + 0x040207f4, 0x0201f800, 0x00109037, 0x0400000a, + 0x4c580000, 0x4200b000, 0x00000002, 0x0401f86e, + 0x5c00b000, 0x0201f800, 0x0010801c, 0x0201f800, + 0x0002077d, 0x5c025800, 0x1c01f000, 0x4937c857, + 0x4d300000, 0x0201f800, 0x0002075a, 0x04000012, + 0x49366009, 0x4a026406, 0x00000001, 0x4d3c0000, + 0x4d380000, 0x417a7800, 0x0201f800, 0x00104567, + 0x492e6008, 0x42027000, 0x00000004, 0x0201f800, + 0x000207a1, 0x5c027000, 0x5c027800, 0x82000540, + 0x00000001, 0x5c026000, 0x1c01f000, 0x4937c857, + 0x4d300000, 0x0201f800, 0x00107942, 0x0400000d, + 0x49366009, 0x4a026406, 0x00000001, 0x492e6008, + 0x4d380000, 0x42027000, 0x00000051, 0x0201f800, + 0x000207a1, 0x5c027000, 0x82000540, 0x00000001, + 0x5c026000, 0x1c01f000, 0x4933c857, 0x4c580000, + 0x59325808, 0x83383580, 0x00000015, 0x04020011, + 0x592c0008, 0x82000500, 0x00ffffff, 0x0402000a, + 0x0201f800, 0x00105755, 0x59cc0000, 0x82000500, + 0x00ffffff, 0x44002800, 0x4200b000, 0x00000001, + 0x0401f80b, 0x0201f800, 0x00107b38, 0x0401f006, + 0x4200b000, 0x00000002, 0x0401f823, 0x0201f800, + 0x0010801c, 0x5c00b000, 0x1c01f000, 0x492fc857, + 0x4c580000, 0x4c000000, 0x8058b1c0, 0x0400000b, + 0x82580500, 0xfffffff0, 0x02020800, 0x001005d8, + 0x8058b0d0, 0x592c0408, 0x82000500, 0xfffff0ff, + 0x80580540, 0x48025c08, 0x5c000000, 0x5c00b000, + 0x1c01f000, 0x492fc857, 0x4c000000, 0x4c040000, + 0x800000d8, 0x592c0c08, 0x82040d00, 0xffff0fff, + 0x80040540, 0x48025c08, 0x5c000800, 0x5c000000, + 0x1c01f000, 0x4933c857, 0x4d2c0000, 0x59325808, + 0x592c0207, 0x8400055e, 0x48025a07, 0x4c500000, + 0x4c540000, 0x4c580000, 0x0401ffd9, 0x0201f800, + 0x00105755, 0x46002800, 0x00000018, 0x80142800, + 0x8058b040, 0x83cca400, 0x00000007, 0x4014a800, + 0x0201f800, 0x0010ab17, 0x5c00b000, 0x5c00a800, + 0x5c00a000, 0x5c025800, 0x1c01f000, 0x59325808, + 0x592c0204, 0x82000580, 0x00000152, 0x1c01f000, + 0x5930001f, 0x80000540, 0x02020800, 0x00100d56, + 0x1c01f000, 0x4d2c0000, 0x59325808, 0x59300203, + 0x4933c857, 0x492fc857, 0x493bc857, 0x4803c857, + 0x82003480, 0x0000000e, 0x02021800, 0x001005d8, + 0x0c01f803, 0x5c025800, 0x1c01f000, 0x001095bd, + 0x001095c8, 0x00109603, 0x001095bd, 0x001095bd, + 0x001095bd, 0x001095bd, 0x001095bd, 0x001095bf, + 0x001095bd, 0x001095bd, 0x001095bd, 0x001095bd, + 0x001095bd, 0x0201f800, 0x001005d8, 0x83383480, + 0x00000056, 0x02021800, 0x001005d8, 0x493a6403, + 0x4a026203, 0x00000001, 0x0201f000, 0x0010672b, + 0x83380580, 0x00000013, 0x0402000f, 0x592c000c, + 0x800001c0, 0x04000006, 0x4a026203, 0x00000002, + 0x59a80037, 0x48026206, 0x1c01f000, 0x4a025a06, + 0x00000000, 0x0201f800, 0x000202da, 0x0201f000, + 0x0002077d, 0x83380580, 0x00000027, 0x0400001a, + 0x83380580, 0x00000014, 0x04000012, 0x83380580, + 0x00000015, 0x04000005, 0x83380580, 0x00000016, + 0x02020800, 0x001005d8, 0x0201f800, 0x00106f60, + 0x02020000, 0x00107974, 0x59300203, 0x82000580, + 0x00000002, 0x02020800, 0x001005d8, 0x0401f014, + 0x0201f800, 0x00106bbf, 0x4a02580e, 0x00000011, + 0x0401f005, 0x0201f800, 0x00106bbf, 0x4a02580e, + 0x00000010, 0x4a025a06, 0x00000031, 0x4a02580d, + 0x00000004, 0x0201f800, 0x000202da, 0x0201f800, + 0x00104c19, 0x0201f000, 0x00107911, 0x59341400, + 0x82081d00, 0x000000ff, 0x59300c03, 0x480bc857, + 0x4807c857, 0x82040580, 0x00000053, 0x0400002e, + 0x82040580, 0x00000002, 0x04000016, 0x82040580, + 0x00000001, 0x04000017, 0x82040580, 0x00000003, + 0x0400001c, 0x82040580, 0x00000005, 0x0400001d, + 0x82040580, 0x00000033, 0x0400001a, 0x82040580, + 0x00000000, 0x0400001b, 0x82040580, 0x00000004, + 0x02020800, 0x001005d8, 0x0401f8a1, 0x0401f016, + 0x820c0580, 0x00000003, 0x0400084c, 0x0401f012, + 0x820c0580, 0x0000000b, 0x0402000f, 0x42000800, + 0x00000007, 0x0201f800, 0x00104571, 0x0401f00a, + 0x820c0580, 0x00000005, 0x04000864, 0x0401f006, + 0x820c0580, 0x00000009, 0x04000889, 0x0401f002, + 0x0401f893, 0x4a026403, 0x00000052, 0x59a81016, + 0x592c040b, 0x8c000500, 0x04000003, 0x42001000, + 0x00000008, 0x592c040b, 0x8c000516, 0x04000003, + 0x82081400, 0x00000018, 0x592c000c, 0x497a580d, + 0x497a580e, 0x80080c80, 0x04000009, 0x04001005, + 0x4a025a06, 0x00000007, 0x40001000, 0x0401f006, + 0x4a025a06, 0x00000015, 0x0401f003, 0x4a025a06, + 0x00000000, 0x480a580c, 0x82081400, 0x00000003, + 0x80081104, 0x0201f800, 0x00107ab5, 0x04000010, + 0x592c1001, 0x480a600b, 0x58080800, 0x82080400, + 0x00000002, 0x592c1011, 0x592c1812, 0x42003000, + 0x00000000, 0x42002000, 0x00101200, 0x0201f800, + 0x00107c32, 0x04000002, 0x1c01f000, 0x4a025a06, + 0x0000002c, 0x497a580c, 0x0201f800, 0x000202da, + 0x0201f000, 0x0002077d, 0x83380580, 0x00000015, + 0x0402000a, 0x59a80005, 0x8c000514, 0x0402000b, + 0x0201f800, 0x0010462a, 0x42000800, 0x00000004, + 0x0201f000, 0x00104571, 0x42000800, 0x00000007, + 0x0201f000, 0x00104571, 0x0201f800, 0x0010513b, + 0x42001000, 0x00000010, 0x04020009, 0x59340002, + 0x82000500, 0x00ff0000, 0x82000580, 0x00ff0000, + 0x040007ec, 0x42001000, 0x00000008, 0x0201f800, + 0x00104c6d, 0x040007e7, 0x592c040b, 0x84000540, + 0x48025c0b, 0x0401f7e9, 0x83380580, 0x00000015, + 0x0402000f, 0x59a80005, 0x8c000514, 0x04020010, + 0x0201f800, 0x0010468d, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x00104567, 0x5c027800, 0x42000800, + 0x00000006, 0x0201f000, 0x00104571, 0x42000800, + 0x00000004, 0x0201f000, 0x00104571, 0x0201f800, + 0x0010513b, 0x42001000, 0x00000010, 0x04020009, + 0x59340002, 0x82000500, 0x00ff0000, 0x82000580, + 0x00ff0000, 0x040007e7, 0x42001000, 0x00000008, + 0x0201f800, 0x00104c6d, 0x040007e2, 0x592c040b, + 0x84000540, 0x48025c0b, 0x0401f7e9, 0x42000800, + 0x00000004, 0x0201f000, 0x00104571, 0x83380580, + 0x00000015, 0x04020005, 0x0201f800, 0x0010a2c8, + 0x02000800, 0x001048c1, 0x1c01f000, 0x83380580, + 0x00000015, 0x0402001d, 0x4c580000, 0x83cc1400, + 0x00000008, 0x4200b000, 0x00000002, 0x83341c00, + 0x00000006, 0x0201f800, 0x0010855a, 0x04020012, + 0x83cc1400, 0x0000000a, 0x4200b000, 0x00000002, + 0x83341c00, 0x00000008, 0x0201f800, 0x0010855a, + 0x04020009, 0x59342200, 0x59cc1007, 0x800811c0, + 0x04000003, 0x480a6801, 0x84102542, 0x8410251a, + 0x48126a00, 0x5c00b000, 0x1c01f000, 0x42000000, + 0x0010b87b, 0x0201f800, 0x0010aa47, 0x0201f800, + 0x00106c55, 0x59300203, 0x4933c857, 0x4803c857, + 0x82000c80, 0x0000000e, 0x02021800, 0x001005d8, + 0x0c01f803, 0x0201f000, 0x00106c4b, 0x0010970b, + 0x0010971a, 0x0010970c, 0x00109709, 0x00109709, + 0x00109709, 0x00109709, 0x00109709, 0x00109709, + 0x00109709, 0x00109709, 0x00109709, 0x00109709, + 0x00109709, 0x0201f800, 0x001005d8, 0x1c01f000, + 0x59300403, 0x82000580, 0x00000052, 0x02000000, + 0x00108d85, 0x0201f800, 0x00104c19, 0x59325808, + 0x4a025a06, 0x00000006, 0x0201f800, 0x000202da, + 0x0201f000, 0x00107911, 0x59301804, 0x840c0520, + 0x48026004, 0x598c000d, 0x81300580, 0x04020010, + 0x8c0c1d20, 0x04020010, 0x42001000, 0x0010b7f6, + 0x50081000, 0x58080002, 0x82000580, 0x00000100, + 0x0400000e, 0x5808000c, 0x81300580, 0x02020800, + 0x001005d8, 0x4978100c, 0x0401f003, 0x8c0c1d20, + 0x040207dc, 0x0201f800, 0x001068d3, 0x040007d9, + 0x0201f800, 0x001005d8, 0x0201f800, 0x00106e8e, + 0x040007f9, 0x59300203, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x0c01f7bd, 0x4933c857, + 0x4c500000, 0x4c540000, 0x4c580000, 0x592c0c07, + 0x4806580a, 0x59cc0809, 0x48065807, 0x59cc0a08, + 0x4806580b, 0x59c80817, 0x82040500, 0x000003ff, + 0x800010c4, 0x8c040d14, 0x04000005, 0x59cc0002, + 0x82000500, 0x00000003, 0x80081480, 0x82080480, + 0x000000f1, 0x02021800, 0x001005d8, 0x480a621a, + 0x412c0800, 0x0201f800, 0x001007d3, 0x02000800, + 0x001005d8, 0x492c0809, 0x58040408, 0x84000552, + 0x84000540, 0x48000c08, 0x82081400, 0x00000003, + 0x80081104, 0x83cca400, 0x00000006, 0x832cac00, + 0x00000004, 0x42000800, 0x00000010, 0x82080480, + 0x00000010, 0x04021003, 0x40080800, 0x80000580, + 0x4004b000, 0x4c000000, 0x0201f800, 0x0010ab28, + 0x5c000000, 0x800001c0, 0x0400000d, 0x412c1000, + 0x4c000000, 0x0201f800, 0x001007d3, 0x02000800, + 0x001005d8, 0x492c1001, 0x832cac00, 0x00000004, + 0x5c000000, 0x40001000, 0x0401f7e9, 0x5c00b000, + 0x5c00a800, 0x5c00a000, 0x1c01f000, 0x4933c857, + 0x4d2c0000, 0x4c380000, 0x59325808, 0x5930021a, + 0x48025a08, 0x59301011, 0x800811c0, 0x04020008, + 0x4a025a06, 0x00000000, 0x592c000b, 0x82000500, + 0x00000c00, 0x0400000b, 0x0401f00b, 0x8c08153e, + 0x04000006, 0x4a025a06, 0x00000007, 0x80081080, + 0x80081000, 0x0401f003, 0x4a025a06, 0x00000015, + 0x480a5807, 0x42000000, 0x0010bed9, 0x50007000, + 0x5838000b, 0x80000540, 0x04020008, 0x4930700c, + 0x4930700b, 0x58380002, 0x82000580, 0x00000000, + 0x04020809, 0x0401f005, 0x82001400, 0x00000000, + 0x45301000, 0x4930700b, 0x5c007000, 0x5c025800, + 0x1c01f000, 0x4933c857, 0x592c0009, 0x40001000, + 0x4800700a, 0x82080400, 0x00000004, 0x48007003, + 0x592c000d, 0x592c100e, 0x48007007, 0x48087008, + 0x592c000a, 0x592c1208, 0x80080c80, 0x04001002, + 0x40001000, 0x82081400, 0x00000003, 0x80081104, + 0x82080480, 0x00000010, 0x04021003, 0x80000580, + 0x0401f003, 0x42001000, 0x00000010, 0x4800700d, + 0x48087004, 0x800810c4, 0x48087005, 0x40381000, + 0x0201f800, 0x00100858, 0x1c01f000, 0x4d2c0000, + 0x0201f800, 0x001007d3, 0x02000800, 0x001005d8, + 0x42000800, 0x0010bed9, 0x452c0800, 0x497a580b, + 0x497a580c, 0x497a580d, 0x4a025809, 0x001097ea, + 0x4a025802, 0x00000100, 0x4a025801, 0x00000000, + 0x5c025800, 0x1c01f000, 0x4833c857, 0x4d300000, + 0x4d2c0000, 0x4c5c0000, 0x4030b800, 0x585c000a, + 0x80025d40, 0x04020004, 0x585c000c, 0x4c000000, + 0x0401f044, 0x585c0002, 0x82000580, 0x00000100, + 0x04020022, 0x592c0801, 0x4c040000, 0x0201f800, + 0x001007f4, 0x5c000800, 0x800409c0, 0x0400001c, + 0x4804b80a, 0x585c100d, 0x800811c0, 0x04020005, + 0x40065800, 0x0201f800, 0x001007fd, 0x0401f014, + 0x82080480, 0x00000010, 0x04021003, 0x80000580, + 0x0401f003, 0x42001000, 0x00000010, 0x4800b80d, + 0x4808b804, 0x800810c4, 0x4808b805, 0x82040400, + 0x00000004, 0x4800b803, 0x405c1000, 0x0201f800, + 0x00100858, 0x0401f025, 0x0401f828, 0x585c000c, + 0x80026540, 0x59300000, 0x80000d40, 0x04020002, + 0x4800b80b, 0x4800b80c, 0x497a6000, 0x4c000000, + 0x4978b80a, 0x59325808, 0x4a025a04, 0x00000103, + 0x59300402, 0x48025c06, 0x592c100b, 0x4c080000, + 0x0201f800, 0x000202c1, 0x0201f800, 0x0010912a, + 0x5c001000, 0x8c081518, 0x04000004, 0x0201f800, + 0x001091d1, 0x0401f003, 0x0201f800, 0x0002077d, + 0x405c7000, 0x5c000000, 0x80026540, 0x04000003, + 0x59325808, 0x0401ff78, 0x5c00b800, 0x5c025800, + 0x5c026000, 0x1c01f000, 0x483bc857, 0x5838000a, + 0x40025800, 0x0201f800, 0x001007fd, 0x5838000c, + 0x80026540, 0x59300008, 0x80025d40, 0x4a025a06, + 0x00000002, 0x1c01f000, 0x4803c857, 0x4d1c0000, + 0x497a601c, 0x41323800, 0x40026000, 0x4d3c0000, + 0x42027800, 0x00000005, 0x0401f83c, 0x5c027800, + 0x411e6000, 0x59300414, 0x84000502, 0x48026414, + 0x5c023800, 0x1c01f000, 0x481bc857, 0x4933c857, + 0x4c5c0000, 0x4c600000, 0x4010b800, 0x4014c000, + 0x0201f800, 0x0010a942, 0x0201f800, 0x00103b25, + 0x04000008, 0x40602800, 0x405c3000, 0x0201f800, + 0x0010a446, 0x82000540, 0x00000001, 0x0401f002, + 0x80000580, 0x5c00c000, 0x5c00b800, 0x1c01f000, + 0x4803c856, 0x4d300000, 0x42026000, 0x0010d1c0, + 0x59a8000e, 0x81640580, 0x04000016, 0x59300c06, + 0x82040580, 0x00000001, 0x04000009, 0x82040580, + 0x00000004, 0x04000006, 0x82040580, 0x00000010, + 0x02000800, 0x00108cf9, 0x0401f005, 0x4807c857, + 0x0201f800, 0x001092d7, 0x04020808, 0x83326400, + 0x00000024, 0x41580000, 0x81300480, 0x040017e9, + 0x5c026000, 0x1c01f000, 0x4933c857, 0x59300403, + 0x4803c857, 0x0201f800, 0x00106c55, 0x4df00000, + 0x59300406, 0x4803c857, 0x82000d80, 0x00000002, + 0x04000018, 0x82000d80, 0x00000001, 0x04000009, + 0x82000d80, 0x00000004, 0x04000006, 0x4933c856, + 0x5c03e000, 0x02000800, 0x00106c4b, 0x0401f03c, + 0x59300203, 0x82000d80, 0x00000001, 0x04000018, + 0x82000d80, 0x00000002, 0x04000026, 0x82000d80, + 0x00000005, 0x04000023, 0x0201f800, 0x001005d8, + 0x59300203, 0x82000d80, 0x00000009, 0x0400000c, + 0x82000d80, 0x0000000b, 0x04000009, 0x82000d80, + 0x0000000a, 0x04000017, 0x82000d80, 0x0000000c, + 0x04000014, 0x0201f800, 0x001005d8, 0x598c000d, + 0x81300580, 0x04020004, 0x0201f800, 0x00106e8e, + 0x0402000c, 0x59300004, 0x4803c857, 0x8c000520, + 0x04000004, 0x84000520, 0x48026004, 0x0401f005, + 0x0201f800, 0x001068d3, 0x02020800, 0x001005d8, + 0x5c03e000, 0x02000800, 0x00106c4b, 0x59300406, + 0x82000d80, 0x00000002, 0x04000009, 0x0201f800, + 0x00104c19, 0x0201f800, 0x0010914e, 0x02000800, + 0x0010801c, 0x8d3e7d00, 0x04000003, 0x0201f000, + 0x00107911, 0x4a02621d, 0x00000001, 0x4a026403, + 0x00000085, 0x4a026203, 0x00000009, 0x4a026406, + 0x00000002, 0x42000800, 0x8000004b, 0x0201f000, + 0x00020721, 0x4933c857, 0x59368c03, 0x4c180000, + 0x59300203, 0x82003480, 0x0000000e, 0x02021800, + 0x001005d8, 0x0c01f803, 0x5c003000, 0x1c01f000, + 0x0010990a, 0x00109dcf, 0x00109edb, 0x0010990a, + 0x0010990a, 0x0010990a, 0x0010990a, 0x0010990a, + 0x0010992d, 0x0010990a, 0x0010990a, 0x0010990a, + 0x0010990a, 0x0010990a, 0x0201f800, 0x001005d8, + 0x4933c857, 0x42028800, 0x0000ffff, 0x813669c0, + 0x04000002, 0x59368c03, 0x4c180000, 0x59300203, + 0x82003480, 0x0000000e, 0x02021800, 0x001005d8, + 0x0c01f803, 0x5c003000, 0x1c01f000, 0x00109929, + 0x0010a180, 0x00109929, 0x00109929, 0x00109929, + 0x00109929, 0x00109929, 0x0010a952, 0x0010a0ed, + 0x0010a52c, 0x0010a562, 0x0010a52c, 0x0010a562, + 0x00109929, 0x0201f800, 0x001005d8, 0x0201f800, + 0x001005d8, 0x83383480, 0x00000051, 0x02021800, + 0x001005d8, 0x41380000, 0x493bc857, 0x4d1c0000, + 0x4d400000, 0x0c01f804, 0x5c028000, 0x5c023800, + 0x1c01f000, 0x0010998a, 0x00109b69, 0x0010998a, + 0x0010998a, 0x0010998a, 0x00109b74, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010998a, + 0x001099ac, 0x001099f5, 0x00109a0c, 0x00109a62, + 0x00109ac6, 0x00109b04, 0x00109b34, 0x0010998a, + 0x0010998a, 0x00109b7c, 0x0010998a, 0x0010998a, + 0x00109b8a, 0x00109b93, 0x0010998a, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x00109c15, + 0x0010998a, 0x0010998a, 0x00109a9a, 0x0010998a, + 0x0010998a, 0x00109bec, 0x0010998a, 0x0010998a, + 0x0010998a, 0x00109c23, 0x0010998a, 0x0010998a, + 0x0010998a, 0x00109c6c, 0x0010998a, 0x0010998a, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010998a, + 0x00109cb9, 0x0010998a, 0x00109ce5, 0x00109cf0, + 0x0010998a, 0x0010998a, 0x0010998c, 0x00109cfb, + 0x0010998a, 0x0010998a, 0x0010998a, 0x0010999b, + 0x0010998a, 0x0010998a, 0x0010998a, 0x00109d02, + 0x00109d0a, 0x00109d28, 0x0201f800, 0x001005d8, + 0x4933c857, 0x0201f800, 0x0010a592, 0x040203a4, + 0x0201f800, 0x0010210a, 0x040203a1, 0x59cc0407, + 0x4802601c, 0x4a026403, 0x00000045, 0x4a026203, + 0x00000001, 0x0201f000, 0x0010672b, 0x4933c857, + 0x0201f800, 0x0010a592, 0x04020395, 0x0201f800, + 0x0010210a, 0x04020392, 0x0401fbce, 0x040201a0, + 0x59cc0007, 0x4802601c, 0x4a026403, 0x0000004a, + 0x4a026203, 0x00000001, 0x0201f000, 0x0010672b, + 0x4933c857, 0x0201f800, 0x0010210a, 0x04020009, + 0x0201f800, 0x001048ec, 0x04020006, 0x82000500, + 0x00000009, 0x82000580, 0x00000008, 0x04020008, + 0x4a026403, 0x00000009, 0x4a02641a, 0x00000009, + 0x4a02621a, 0x00000000, 0x0401f1b2, 0x0201f800, + 0x001048c1, 0x0201f800, 0x00104a09, 0x04000021, + 0x0201f800, 0x001049ed, 0x0400001e, 0x0201f800, + 0x0010a252, 0x04020025, 0x42028000, 0x00000029, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x0010203c, + 0x5c027800, 0x0201f800, 0x0010462a, 0x836c0580, + 0x00000002, 0x04020004, 0x59a8001b, 0x80000000, + 0x4803501b, 0x4a026403, 0x00000008, 0x42003000, + 0x00000003, 0x0201f800, 0x00103b25, 0x04000191, + 0x4a026203, 0x00000007, 0x41782800, 0x0401f180, + 0x0201f800, 0x0010a3da, 0x040207e1, 0x4a026403, + 0x00000009, 0x4a02641a, 0x0000000e, 0x4a02621a, + 0x00001900, 0x0401f183, 0x4a026403, 0x00000009, + 0x4a02641a, 0x00000003, 0x4a02621a, 0x00000f00, + 0x0401f17c, 0x4933c857, 0x0201f800, 0x0010210a, + 0x0402033b, 0x0201f800, 0x001048ec, 0x04020338, + 0x493a6403, 0x0201f800, 0x0010a22d, 0x04020006, + 0x42003000, 0x00000005, 0x4a026403, 0x00000006, + 0x0401f7d9, 0x4a026403, 0x00000007, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00000000, 0x0401f165, + 0x4933c857, 0x0201f800, 0x001048ec, 0x04020324, + 0x0201f800, 0x0010a592, 0x02000800, 0x0010210a, + 0x0402031f, 0x0201f800, 0x00104a09, 0x04020005, + 0x42027800, 0x00000001, 0x0201f800, 0x00104567, + 0x0201f800, 0x001049fc, 0x0402002b, 0x59cc0206, + 0x82003500, 0x00000003, 0x0402002e, 0x82003480, + 0x00000014, 0x0400102b, 0x5934300a, 0x84183516, + 0x82000580, 0x00000014, 0x04020002, 0x84183556, + 0x481a680a, 0x59cc0406, 0x82000500, 0x00000003, + 0x04020020, 0x0201f800, 0x0010a29f, 0x04020028, + 0x0201f800, 0x001049e7, 0x0402000c, 0x417a7800, + 0x0201f800, 0x001020a1, 0x42003000, 0x00000006, + 0x0201f800, 0x0010a93a, 0x42000000, 0x0010b865, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x0010468d, + 0x4a026403, 0x0000000a, 0x42003000, 0x00000020, + 0x0401f795, 0x4a026403, 0x0000000b, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00001e00, 0x0401f121, + 0x42000000, 0x0010b860, 0x0201f800, 0x0010aa47, + 0x4a026403, 0x0000000b, 0x4a02641a, 0x00000007, + 0x4a02621a, 0x00000000, 0x0401f116, 0x4a026403, + 0x0000000b, 0x4a02641a, 0x00000003, 0x4a02621a, + 0x00000000, 0x0401f10f, 0x4933c857, 0x0201f800, + 0x001048ec, 0x040202ce, 0x0201f800, 0x0010a592, + 0x040202cb, 0x0201f800, 0x0010210a, 0x040202c8, + 0x59cc0206, 0x82003500, 0x00000003, 0x0402001d, + 0x82003480, 0x00000014, 0x0400101a, 0x59cc0406, + 0x82000500, 0x00000003, 0x04020016, 0x59340400, + 0x82000580, 0x00000707, 0x04000019, 0x417a7800, + 0x0201f800, 0x001020a1, 0x42003000, 0x0000000a, + 0x0201f800, 0x0010a93a, 0x42000000, 0x0010b862, + 0x0201f800, 0x0010aa47, 0x4a026403, 0x0000000c, + 0x41782800, 0x42003000, 0x00000021, 0x0401f752, + 0x4a026403, 0x0000000d, 0x4a02641a, 0x00000007, + 0x4a02621a, 0x00000000, 0x0401f0de, 0x4a026403, + 0x0000000d, 0x4a02641a, 0x00000009, 0x4a02621a, + 0x00001e00, 0x0401f0d7, 0x4933c857, 0x0201f800, + 0x001048ec, 0x04020296, 0x0201f800, 0x0010a592, + 0x04020293, 0x0201f800, 0x0010210a, 0x04020290, + 0x0401facc, 0x0402001a, 0x493a6403, 0x4c5c0000, + 0x0401fad2, 0x0402000e, 0x4a026403, 0x0000002e, + 0x405c2800, 0x42003000, 0x00000024, 0x0201f800, + 0x00103b25, 0x0400000c, 0x4a026203, 0x00000007, + 0x405c2800, 0x5c00b800, 0x0401f0ad, 0x4a026403, + 0x0000000d, 0x4a02641a, 0x00000007, 0x4a02621a, + 0x00000000, 0x5c00b800, 0x0401f0b2, 0x4a026403, + 0x0000000d, 0x4a02641a, 0x00000009, 0x4a02621a, + 0x00001e00, 0x0401f0ab, 0x4933c857, 0x0201f800, + 0x001048ec, 0x040206ef, 0x59a80026, 0x82000500, + 0x00000009, 0x82000580, 0x00000008, 0x040006e9, + 0x0201f800, 0x001049fc, 0x0402002d, 0x0201f800, + 0x0010a2a7, 0x04020007, 0x4a026403, 0x0000000e, + 0x41782800, 0x42003000, 0x00000052, 0x0401f702, + 0x4933c857, 0x42003000, 0x00000003, 0x0201f800, + 0x0010a942, 0x4d3c0000, 0x417a7800, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x59340200, 0x84000558, + 0x48026a00, 0x42000800, 0x0000000b, 0x0201f800, + 0x00104571, 0x0201f800, 0x00103b25, 0x04000076, + 0x42003000, 0x00000007, 0x0401f062, 0x4933c857, + 0x4a026403, 0x0000000f, 0x4a02641a, 0x00000003, + 0x4a02621a, 0x00001e00, 0x0401f072, 0x59340400, + 0x82000580, 0x00000703, 0x040007f5, 0x0401f040, + 0x4933c857, 0x0201f800, 0x001048ec, 0x0402022c, + 0x59a80026, 0x82000500, 0x00000009, 0x82000580, + 0x00000008, 0x04000226, 0x0201f800, 0x001049f3, + 0x0402002f, 0x0201f800, 0x0010a2c8, 0x02000800, + 0x0010a252, 0x04020007, 0x4a026403, 0x00000010, + 0x41782800, 0x42003000, 0x00000050, 0x0401f6c2, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x0010203c, + 0x5c027800, 0x42003000, 0x00000003, 0x0201f800, + 0x0010a942, 0x42000000, 0x0010b864, 0x0201f800, + 0x0010aa47, 0x59340200, 0x84000558, 0x48026a00, + 0x0401f7c5, 0x4a026403, 0x00000011, 0x4a02641a, + 0x00000003, 0x4a02621a, 0x00001e00, 0x0401f03d, + 0x4933c857, 0x0201f800, 0x0010210a, 0x02000800, + 0x0010a592, 0x040201fa, 0x0401fa36, 0x04020008, + 0x4a026403, 0x00000012, 0x0401f032, 0x59340400, + 0x82000580, 0x00000703, 0x040007eb, 0x4d3c0000, + 0x417a7800, 0x42028000, 0x00000029, 0x0201f800, + 0x0010203c, 0x5c027800, 0x42003000, 0x00000017, + 0x0201f800, 0x0010a942, 0x42000000, 0x0010b864, + 0x0201f800, 0x0010aa47, 0x0201f800, 0x00103b25, + 0x04000015, 0x42003000, 0x00000006, 0x41782800, + 0x42028000, 0x00000029, 0x4933c857, 0x4a026403, + 0x00000001, 0x4a026203, 0x00000007, 0x0201f800, + 0x0010a974, 0x0201f000, 0x0010a43e, 0x42028000, + 0x00000046, 0x0201f800, 0x0010a974, 0x0201f000, + 0x0010a43e, 0x4933c857, 0x4a026403, 0x00000001, + 0x42000800, 0x0000000b, 0x0201f800, 0x00104571, + 0x4a026203, 0x00000001, 0x0201f000, 0x0010672b, + 0x4933c857, 0x42000800, 0x00000009, 0x0201f800, + 0x00104571, 0x4a026403, 0x00000005, 0x0401f7f5, + 0x0201f800, 0x0010a592, 0x040201b5, 0x0201f800, + 0x0010210a, 0x040201b2, 0x0401f9ee, 0x040207c0, + 0x4a026403, 0x00000020, 0x4a026203, 0x00000001, + 0x0201f000, 0x0010672b, 0x0201f800, 0x0010210a, + 0x040201a7, 0x4a026403, 0x00000023, 0x4a026203, + 0x00000001, 0x0201f000, 0x0010672b, 0x0201f800, + 0x0010a592, 0x02000800, 0x0010210a, 0x0402019c, + 0x0401f9d8, 0x040207aa, 0x40300800, 0x59a81010, + 0x59cc0007, 0x82000500, 0x00ffffff, 0x80080580, + 0x04000019, 0x59cc1408, 0x0201f800, 0x0010902c, + 0x0400002d, 0x59cc0c08, 0x4d300000, 0x0201f800, + 0x00105dd7, 0x41323800, 0x5c026000, 0x04000026, + 0x591c0202, 0x82000580, 0x0000ffff, 0x04000005, + 0x59cc1208, 0x591c0202, 0x80080580, 0x0402001e, + 0x591c0406, 0x82000580, 0x00000007, 0x0402001a, + 0x0401f02c, 0x59cc1208, 0x82080580, 0x0000ffff, + 0x0400000c, 0x0201f800, 0x00109410, 0x04000012, + 0x59cc1408, 0x591c0202, 0x80080580, 0x0402000e, + 0x591c0009, 0x81340580, 0x04000016, 0x0401f00a, + 0x59cc1408, 0x417a7800, 0x0201f800, 0x0010a405, + 0x04020010, 0x59cc1208, 0x82080580, 0x0000ffff, + 0x04000019, 0x4a026403, 0x00000026, 0x4a02621a, + 0x00001700, 0x59cc1204, 0x82081580, 0x0000ffff, + 0x04020798, 0x4a026403, 0x00000025, 0x0401f795, + 0x591c0406, 0x82000580, 0x00000007, 0x040207f2, + 0x591c0403, 0x82000580, 0x00000024, 0x04020006, + 0x4d300000, 0x411e6000, 0x0201f800, 0x0002077d, + 0x5c026000, 0x4a026403, 0x00000025, 0x0401f785, + 0x4933c857, 0x4d3c0000, 0x42027800, 0x00000001, + 0x0201f800, 0x00104567, 0x5c027800, 0x4c580000, + 0x4200b000, 0x00000002, 0x83a81c00, 0x00000002, + 0x83cc1400, 0x0000000b, 0x0201f800, 0x0010855a, + 0x5c00b000, 0x04000004, 0x4a026403, 0x00000031, + 0x0401f770, 0x0201f800, 0x00107911, 0x0201f800, + 0x0010513b, 0x0402000f, 0x0201f800, 0x00105149, + 0x04020008, 0x4a035033, 0x00000001, 0x4202d800, + 0x00000001, 0x0201f800, 0x001050a2, 0x0401f005, + 0x42000000, 0x00000001, 0x0201f800, 0x00105113, + 0x1c01f000, 0x0201f800, 0x0010210a, 0x0402011c, + 0x0401f958, 0x0402072a, 0x493a6403, 0x0401f996, + 0x04020004, 0x4a026403, 0x0000002b, 0x0401f751, + 0x4a026403, 0x0000002c, 0x0401f74e, 0x4933c857, + 0x0201f800, 0x0010210a, 0x0402010d, 0x0201f800, + 0x001049e7, 0x04020740, 0x0201f800, 0x001048d9, + 0x0400003c, 0x59cc0408, 0x48026419, 0x59cc0208, + 0x48026219, 0x59cc0807, 0x59340002, 0x82000500, + 0x00ffffff, 0x80040580, 0x04000012, 0x59a80010, + 0x80040580, 0x04020021, 0x59cc1408, 0x0201f800, + 0x00109410, 0x04000023, 0x0201f800, 0x0010a4ca, + 0x04000020, 0x0201f800, 0x0010a921, 0x0400001d, + 0x491e601e, 0x4a026403, 0x00000036, 0x0401f0e6, + 0x59cc1208, 0x82080580, 0x0000ffff, 0x04000009, + 0x0201f800, 0x00109410, 0x04000012, 0x591c0202, + 0x59cc0c08, 0x80040580, 0x0402000e, 0x0401f7eb, + 0x59cc1408, 0x41327800, 0x0201f800, 0x0010a405, + 0x04000008, 0x0401f7e5, 0x4803c856, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00001500, 0x0401f006, + 0x4803c856, 0x4a02641a, 0x00000003, 0x4a02621a, + 0x00001700, 0x4a026403, 0x00000037, 0x0401f0c6, + 0x4803c856, 0x4a026403, 0x00000012, 0x0401f0c2, + 0x4933c857, 0x0201f800, 0x0010210a, 0x040200c4, + 0x0201f800, 0x001049e7, 0x040206f7, 0x0201f800, + 0x001048d9, 0x0400003e, 0x59cc0407, 0x48026419, + 0x59cc1207, 0x480a6219, 0x82080580, 0x0000ffff, + 0x04000005, 0x0201f800, 0x00109410, 0x0400002c, + 0x0401f006, 0x59cc1407, 0x41327800, 0x0201f800, + 0x0010a405, 0x04000026, 0x59cc0c07, 0x591c0202, + 0x80040580, 0x04020022, 0x4d300000, 0x411e6000, + 0x0201f800, 0x00108bd7, 0x5c026000, 0x59cc0c09, + 0x82040d00, 0x0000ff00, 0x840409c0, 0x0201f800, + 0x0010a921, 0x04000016, 0x82040580, 0x00000001, + 0x0400000a, 0x82040580, 0x00000005, 0x04000004, + 0x82040580, 0x00000007, 0x04020007, 0x591c0008, + 0x80000540, 0x04000004, 0x59cc2808, 0x0201f000, + 0x0010a4de, 0x4803c856, 0x4a02641a, 0x00000009, + 0x4a02621a, 0x00002a00, 0x0401f006, 0x4803c856, + 0x4a02641a, 0x00000003, 0x4a02621a, 0x00000300, + 0x4a026403, 0x0000003b, 0x0401f07b, 0x4803c856, + 0x4a02641a, 0x0000000b, 0x4a02621a, 0x00000000, + 0x0401f7f8, 0x4c080000, 0x0201f800, 0x001048ec, + 0x04000026, 0x0201f800, 0x001048c1, 0x0201f800, + 0x0010a601, 0x0402001e, 0x59a80026, 0x82000540, + 0x00000003, 0x48035026, 0x59a8001d, 0x800000d0, + 0x59a80810, 0x82040d00, 0x000000ff, 0x80041540, + 0x480b5010, 0x42000800, 0x00000003, 0x0201f800, + 0x00106c78, 0x497b5028, 0x0201f800, 0x00103b25, + 0x04000003, 0x4a032804, 0x000007d0, 0x8c00050a, + 0x0402000a, 0x0201f800, 0x0002077d, 0x0201f800, + 0x00101e45, 0x5c001000, 0x1c01f000, 0x0201f800, + 0x0010a623, 0x0401f7fc, 0x5c001000, 0x0201f000, + 0x0002077d, 0x0201f800, 0x0010210a, 0x0402004c, + 0x0201f800, 0x0010a628, 0x4a026403, 0x00000047, + 0x4a026203, 0x00000001, 0x0201f000, 0x0010672b, + 0x0201f800, 0x0010210a, 0x04020041, 0x0201f800, + 0x0010a628, 0x4a026403, 0x00000047, 0x4a026203, + 0x00000001, 0x0201f000, 0x0010672b, 0x0201f800, + 0x0010210a, 0x04020036, 0x0201f800, 0x0010a628, + 0x0201f000, 0x0002077d, 0x0401f834, 0x04000030, + 0x4a026403, 0x0000004e, 0x4a026203, 0x00000001, + 0x0201f000, 0x0010672b, 0x4a026403, 0x0000004f, + 0x497a601c, 0x59cc0a06, 0x82040d00, 0x000000ff, + 0x800409c0, 0x0400065f, 0x82040580, 0x00000001, + 0x04020005, 0x59cc0808, 0x59a80005, 0x80040580, + 0x04000658, 0x82040580, 0x00000002, 0x0402000a, + 0x83cc1400, 0x0000000b, 0x4200b000, 0x00000002, + 0x83341c00, 0x00000006, 0x0201f800, 0x0010855a, + 0x0400064c, 0x4a02601c, 0x00000001, 0x0401f649, + 0x4a026403, 0x00000050, 0x59cc0207, 0x4802601c, + 0x0401f644, 0x4a026203, 0x00000001, 0x42000800, + 0x80000040, 0x0201f000, 0x00020721, 0x4803c857, + 0x0201f000, 0x0002077d, 0x4d2c0000, 0x4c500000, + 0x4c580000, 0x4c540000, 0x59a80016, 0x82000c80, + 0x00000829, 0x04021029, 0x0201f800, 0x001007d3, + 0x04000026, 0x492e6008, 0x59a80016, 0x80000104, + 0x48025802, 0x83cca400, 0x00000006, 0x82000c80, + 0x0000000b, 0x04001013, 0x4a025811, 0x0000000b, + 0x4200b000, 0x0000000b, 0x832c0400, 0x00000005, + 0x4000a800, 0x0201f800, 0x0010ab17, 0x412c7000, + 0x0201f800, 0x001007d3, 0x04000010, 0x492c7001, + 0x40040000, 0x800409c0, 0x04000009, 0x0401f7ec, + 0x48025811, 0x4000b000, 0x832c0400, 0x00000005, + 0x4000a800, 0x0201f800, 0x0010ab17, 0x82000540, + 0x00000001, 0x0401f006, 0x497b5016, 0x59325808, + 0x0201f800, 0x001007fd, 0x80000580, 0x5c00a800, + 0x5c00b000, 0x5c00a000, 0x5c025800, 0x1c01f000, + 0x4d340000, 0x59326809, 0x59343400, 0x4933c857, + 0x4937c857, 0x481bc857, 0x0201f800, 0x001049f3, + 0x5c026800, 0x1c01f000, 0x4933c857, 0x4c5c0000, + 0x4d3c0000, 0x0401f840, 0x0402002c, 0x59cc0207, + 0x82000d00, 0x0000ff00, 0x900411c0, 0x59cc000a, + 0x82000500, 0x00ffffff, 0x80081540, 0x480a601c, + 0x8c040d18, 0x0400000e, 0x42003000, 0x00000008, + 0x0201f800, 0x0010a932, 0x42000000, 0x0010b863, + 0x0201f800, 0x0010aa47, 0x4200b800, 0x00000002, + 0x42027800, 0x00000001, 0x0401f011, 0x4178b800, + 0x8c040d1a, 0x04000011, 0x59cc000a, 0x0201f800, + 0x00105c9a, 0x0402000d, 0x42003000, 0x00000009, + 0x0201f800, 0x0010a93a, 0x42000000, 0x0010b863, + 0x0201f800, 0x0010aa47, 0x417a7800, 0x0201f800, + 0x001020a1, 0x0401f004, 0x82000540, 0x00000001, + 0x0401f002, 0x80000580, 0x5c027800, 0x5c00b800, + 0x1c01f000, 0x4933c857, 0x59cc0206, 0x82000480, + 0x00000010, 0x04021006, 0x4a02621a, 0x00000000, + 0x82000540, 0x00000001, 0x0401f002, 0x80000580, + 0x1c01f000, 0x4933c857, 0x4a02621a, 0x00000000, + 0x59cc0407, 0x82000500, 0x0000ff00, 0x82000580, + 0x00000800, 0x04020009, 0x59cc0006, 0x82000500, + 0x00ff0000, 0x82000d80, 0x00140000, 0x04000003, + 0x82000d80, 0x00100000, 0x1c01f000, 0x4933c857, + 0x59300403, 0x82003480, 0x00000051, 0x02021800, + 0x001005d8, 0x83383580, 0x00000013, 0x04020003, + 0x4803c857, 0x0c01f012, 0x83383580, 0x00000027, + 0x04000005, 0x83383580, 0x00000014, 0x02020800, + 0x001005d8, 0x0201f800, 0x001048c1, 0x42000800, + 0x00000007, 0x0201f800, 0x00104571, 0x0201f800, + 0x00106bbf, 0x0201f000, 0x00107911, 0x00109e3c, + 0x00109e45, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e45, 0x00109e50, 0x00109ecd, 0x00109e95, + 0x00109ecd, 0x00109ead, 0x00109ecd, 0x00109ebe, + 0x00109ecd, 0x00109ec6, 0x00109ecd, 0x00109ec6, + 0x00109ecd, 0x00109ecd, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e45, 0x00109e3c, 0x00109ecd, + 0x00109e3c, 0x00109e3c, 0x00109ecd, 0x00109e3c, + 0x00109eca, 0x00109ecd, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e3c, 0x00109ecd, 0x00109ecd, + 0x00109e3c, 0x00109ec3, 0x00109ecd, 0x00109e3c, + 0x00109e4a, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109ec9, 0x00109ecd, 0x00109e3c, + 0x00109e3c, 0x00109ecd, 0x00109ecd, 0x00109e3c, + 0x00109e3c, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e3c, 0x00109e3c, 0x00109e3c, + 0x00109e3e, 0x00109e3c, 0x00109e3e, 0x00109e3c, + 0x00109e3c, 0x00109e3e, 0x00109e3c, 0x00109e3c, + 0x00109e3c, 0x00109e3e, 0x00109e3e, 0x00109e3e, + 0x0201f800, 0x001005d8, 0x4d2c0000, 0x59325808, + 0x0201f800, 0x001007fd, 0x5c025800, 0x0201f000, + 0x0002077d, 0x59a80037, 0x48026206, 0x4a026203, + 0x00000002, 0x1c01f000, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x00104567, 0x5c027800, 0x0401f07e, + 0x42000800, 0x00000007, 0x0201f800, 0x00104571, + 0x59a80026, 0x8c000508, 0x04000012, 0x59326809, + 0x4c580000, 0x4200b000, 0x00000002, 0x83a81c00, + 0x00000002, 0x83341400, 0x00000006, 0x0201f800, + 0x0010855a, 0x80000540, 0x5c00b000, 0x0402006a, + 0x59340200, 0x8400051a, 0x48026a00, 0x0401f01b, + 0x599c0017, 0x8c00050a, 0x04020063, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x00104567, 0x5c027800, + 0x42000800, 0x00000007, 0x0201f800, 0x00104571, + 0x59340212, 0x82000500, 0x0000ff00, 0x04000056, + 0x599c0019, 0x8c00050e, 0x04020053, 0x416c0000, + 0x82000580, 0x00000002, 0x04020004, 0x59a8001b, + 0x80000000, 0x4803501b, 0x42000800, 0x00000003, + 0x0201f800, 0x00104571, 0x4a026406, 0x00000001, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000002, + 0x0201f800, 0x0010672b, 0x4ce80000, 0x4201d000, + 0x00000001, 0x0201f800, 0x00105fae, 0x5c01d000, + 0x1c01f000, 0x0201f800, 0x001049f3, 0x04000036, + 0x0201f800, 0x0010645e, 0x42000800, 0x00000004, + 0x0201f800, 0x00104571, 0x0201f800, 0x0010a96a, + 0x0402002d, 0x42000800, 0x00000005, 0x0201f800, + 0x00104571, 0x4a026406, 0x00000001, 0x4a026203, + 0x00000001, 0x4a026403, 0x00000003, 0x0201f000, + 0x0010672b, 0x42000800, 0x00000006, 0x0401f820, + 0x59303009, 0x599c0017, 0x8c00050a, 0x0402001a, + 0x59a80026, 0x8c000508, 0x04000017, 0x0201f800, + 0x001049e7, 0x04000014, 0x59a8001b, 0x80000000, + 0x4803501b, 0x0401f7c5, 0x42000800, 0x00000004, + 0x0201f800, 0x00104571, 0x0401f792, 0x42000800, + 0x00000004, 0x0401f006, 0x0201f800, 0x001048c1, + 0x0401f005, 0x0401f004, 0x0401f003, 0x0201f800, + 0x00104571, 0x0201f000, 0x0002077d, 0x4933c857, + 0x4807c857, 0x0201f800, 0x00104571, 0x4d3c0000, + 0x417a7800, 0x0201f800, 0x00104567, 0x5c027800, + 0x0201f800, 0x00102074, 0x1c01f000, 0x4933c857, + 0x59340400, 0x80000110, 0x82003480, 0x0000000c, + 0x02021800, 0x001005d8, 0x83383580, 0x00000015, + 0x04020002, 0x0c01f006, 0x83383580, 0x00000016, + 0x02020800, 0x001005d8, 0x0c01f00d, 0x001080b8, + 0x001080b8, 0x001080b8, 0x001080b8, 0x001080b8, + 0x001080b8, 0x00109f30, 0x00109f03, 0x001080b8, + 0x001080b8, 0x001080b8, 0x001080b8, 0x001080b8, + 0x001080b8, 0x001080b8, 0x001080b8, 0x001080b8, + 0x001080b8, 0x00109f30, 0x00109f37, 0x001080b8, + 0x001080b8, 0x001080b8, 0x001080b8, 0x4933c857, + 0x599c0017, 0x8c00050a, 0x0402001b, 0x813669c0, + 0x04000019, 0x59340212, 0x82000500, 0x0000ff00, + 0x04000015, 0x599c0019, 0x8c00050e, 0x04020012, + 0x4d3c0000, 0x417a7800, 0x0201f800, 0x00104567, + 0x5c027800, 0x42000800, 0x00000003, 0x0201f800, + 0x00104571, 0x4a026406, 0x00000001, 0x4a026203, + 0x00000001, 0x4a026403, 0x00000002, 0x0201f000, + 0x0010672b, 0x59cc0001, 0x0201f800, 0x00105c9a, + 0x0402000b, 0x0201f800, 0x00020245, 0x02020000, + 0x0002077d, 0x59345002, 0x0201f800, 0x001042b4, + 0x482a6802, 0x0201f000, 0x0002077d, 0x1c01f000, + 0x4933c857, 0x59303403, 0x82183580, 0x0000001e, + 0x02000000, 0x0002077d, 0x1c01f000, 0x4933c857, + 0x0201f800, 0x001083df, 0x02020000, 0x0002077d, + 0x4a026203, 0x00000001, 0x4a026403, 0x00000001, + 0x0201f000, 0x0010672b, 0x493bc857, 0x83380580, + 0x00000051, 0x0402000b, 0x0201f800, 0x00106f60, + 0x02020000, 0x00107974, 0x59300203, 0x82000580, + 0x00000002, 0x0400006d, 0x0201f800, 0x001005d8, + 0x83380580, 0x00000027, 0x04000014, 0x83380580, + 0x00000048, 0x04000006, 0x83380580, 0x00000014, + 0x0400000e, 0x02020800, 0x001005d8, 0x0201f800, + 0x00106f60, 0x02020000, 0x00107974, 0x59300203, + 0x82000580, 0x00000004, 0x02000000, 0x0002086e, + 0x0201f800, 0x001005d8, 0x59300403, 0x82000c80, + 0x00000044, 0x02021800, 0x001005d8, 0x82000480, + 0x00000040, 0x02001800, 0x001005d8, 0x40027000, + 0x4803c857, 0x0c01f001, 0x00109f76, 0x00109f78, + 0x00109f78, 0x00109f93, 0x0201f800, 0x001005d8, + 0x0201f800, 0x00106bbf, 0x59325808, 0x812e59c0, + 0x04000016, 0x832c0500, 0x00ff0000, 0x04000013, + 0x4a026203, 0x00000002, 0x59326809, 0x59340200, + 0x8c00050e, 0x0402000d, 0x42028000, 0x00000004, + 0x0201f800, 0x0010a3ef, 0x497a6008, 0x59300206, + 0x80000540, 0x04020003, 0x59a80038, 0x48026206, + 0x4a026203, 0x00000007, 0x1c01f000, 0x0201f800, + 0x00106bbf, 0x0201f800, 0x00109037, 0x02000000, + 0x00107911, 0x59325808, 0x0201f800, 0x001007f4, + 0x0201f000, 0x00107911, 0x0201f800, 0x001005d8, + 0x59325808, 0x592c040a, 0x8c000502, 0x04000007, + 0x4a026203, 0x00000007, 0x42027000, 0x00000043, + 0x0201f000, 0x000207a1, 0x4a026203, 0x00000004, + 0x1c01f000, 0x0201f800, 0x0010a597, 0x02000000, + 0x0002086c, 0x1c01f000, 0x4a026203, 0x00000001, + 0x4a026403, 0x00000041, 0x42027800, 0x80002042, + 0x0201f000, 0x00020721, 0x83380580, 0x00000051, + 0x04000006, 0x83380580, 0x00000041, 0x02020800, + 0x001005d8, 0x1c01f000, 0x0201f800, 0x000206fd, + 0x0201f800, 0x0010a5df, 0x0201f000, 0x0002077d, + 0x83380480, 0x00000050, 0x02021800, 0x001005d8, + 0x83380480, 0x00000049, 0x02001800, 0x001005d8, + 0x0c01f001, 0x00109fda, 0x00109ffb, 0x00109fd8, + 0x00109fd8, 0x00109fd8, 0x00109fd8, 0x00109ffb, + 0x0201f800, 0x001005d8, 0x59325808, 0x592c040a, + 0x8c00051e, 0x0400000d, 0x82000d00, 0x000000c0, + 0x82040d80, 0x00000080, 0x0400000d, 0x59300804, + 0x8c040d18, 0x0402000a, 0x42027000, 0x00000041, + 0x0201f000, 0x0002088d, 0x4a026203, 0x00000007, + 0x497a6206, 0x0201f000, 0x000206fd, 0x59325808, + 0x592c0c0a, 0x8c040d1a, 0x04020005, 0x0201f800, + 0x000206fd, 0x0201f000, 0x0002077d, 0x0201f800, + 0x0010a597, 0x040007fa, 0x1c01f000, 0x0201f800, + 0x00106b8a, 0x59325808, 0x59326809, 0x59340200, + 0x8c00050e, 0x0400000e, 0x592c040a, 0x82000500, + 0x000000c0, 0x82000580, 0x00000080, 0x04000005, + 0x592c000f, 0x59301815, 0x800c1c80, 0x480e6015, + 0x4a026203, 0x00000002, 0x0401f00d, 0x42028000, + 0x00000004, 0x0401fbde, 0x59300206, 0x80000540, + 0x04020004, 0x59a80038, 0x800000c2, 0x48026206, + 0x497a6008, 0x4a026203, 0x00000007, 0x1c01f000, + 0x4a026203, 0x00000007, 0x497a6206, 0x0201f000, + 0x000206fd, 0x4a026203, 0x00000007, 0x497a6206, + 0x0201f000, 0x000206f8, 0x59300414, 0x8c00051c, + 0x02020000, 0x0002087e, 0x59325808, 0x592c200f, + 0x40080000, 0x80102480, 0x59300015, 0x80102400, + 0x48126015, 0x0201f000, 0x0002087e, 0x8c040d0e, + 0x0402000a, 0x4a026203, 0x00000006, 0x0401f823, + 0x5930001f, 0x80000540, 0x02020800, 0x00100d7c, + 0x0201f000, 0x000206f8, 0x4a026203, 0x00000002, + 0x1c01f000, 0x42000800, 0x00000001, 0x0201f800, + 0x00100d7c, 0x82040580, 0x00000001, 0x02000000, + 0x00020885, 0x0401f7d8, 0x59300414, 0x8c00051c, + 0x04000006, 0x0201f800, 0x00100b63, 0x02000000, + 0x00020877, 0x1c01f000, 0x59300011, 0x80000540, + 0x04020005, 0x0201f800, 0x00100b63, 0x02000000, + 0x00020877, 0x1c01f000, 0x492fc857, 0x480bc857, + 0x8c08153e, 0x04000006, 0x80081080, 0x80081000, + 0x42000800, 0x00000009, 0x0401f003, 0x42000800, + 0x00000015, 0x480a580b, 0x1c01f000, 0x83380580, + 0x00000013, 0x04000005, 0x83380580, 0x00000014, + 0x02020800, 0x001005d8, 0x59300414, 0x8c000516, + 0x02000800, 0x001005d8, 0x1c01f000, 0x0201f800, + 0x001005d8, 0x59300008, 0x80000540, 0x02020800, + 0x001005d8, 0x1c01f000, 0x59300414, 0x8c000516, + 0x02000800, 0x001005d8, 0x1c01f000, 0x4a026203, + 0x00000004, 0x493a6403, 0x42000800, 0x80002001, + 0x0201f000, 0x00020721, 0x4a026203, 0x00000003, + 0x493a6403, 0x0201f800, 0x000200c9, 0x59325808, + 0x592c040a, 0x8c00051e, 0x04000012, 0x82000500, + 0x000000c0, 0x82000580, 0x00000080, 0x04000011, + 0x59300414, 0x8c000512, 0x0402000a, 0x8c000510, + 0x04020008, 0x592c040c, 0x80000540, 0x04020005, + 0x82080d40, 0x80003065, 0x0201f000, 0x00106721, + 0x82080d40, 0x80002065, 0x0201f000, 0x00106721, + 0x82080d40, 0x80002042, 0x0201f000, 0x00106721, + 0x4933c857, 0x493bc857, 0x83380480, 0x00000044, + 0x02021800, 0x001005d8, 0x83380480, 0x00000041, + 0x02001800, 0x001005d8, 0x0c01f001, 0x0010a0b6, + 0x0010a0c6, 0x0010a0db, 0x59325808, 0x592c040a, + 0x8c00051e, 0x0400001d, 0x82001d00, 0x000000c0, + 0x820c1d80, 0x000000c0, 0x04000018, 0x4a026203, + 0x00000001, 0x493a6403, 0x42000800, 0x80002042, + 0x0201f000, 0x00020721, 0x59325808, 0x592c040a, + 0x8c00051e, 0x0400000d, 0x82001d00, 0x000000c0, + 0x820c1d80, 0x000000c0, 0x04000008, 0x4a026203, + 0x00000001, 0x493a6403, 0x42000800, 0x80002001, + 0x0201f000, 0x00020721, 0x497a6008, 0x497a6206, + 0x42028000, 0x00000004, 0x0401f315, 0x59325808, + 0x592c040a, 0x8c00051e, 0x040007f8, 0x82001d00, + 0x000000c0, 0x820c1d80, 0x000000c0, 0x040007f3, + 0x4a026203, 0x00000003, 0x493a6403, 0x0201f800, + 0x000200c9, 0x82080d40, 0x80002065, 0x0201f000, + 0x00106721, 0x4933c857, 0x493bc857, 0x83380580, + 0x00000085, 0x04000006, 0x83380580, 0x00000088, + 0x0400000a, 0x0201f800, 0x001005d8, 0x4a026203, + 0x00000009, 0x493a6403, 0x42000800, 0x8000004b, + 0x0201f000, 0x00020721, 0x4d1c0000, 0x813669c0, + 0x04000004, 0x0201f800, 0x0010a592, 0x04020044, + 0x59cc1404, 0x0401f846, 0x04000018, 0x591c0406, + 0x82000500, 0x0000001f, 0x82002580, 0x00000006, + 0x04000007, 0x82002580, 0x00000004, 0x0400002e, + 0x82002580, 0x00000011, 0x0402000c, 0x497a3a05, + 0x42002000, 0x00000054, 0x0201f800, 0x00107a4a, + 0x4a026203, 0x00000007, 0x493a6403, 0x0201f800, + 0x0010a974, 0x0401f02c, 0x0201f800, 0x00103b25, + 0x04000004, 0x42023800, 0xffffffff, 0x0401f7f1, + 0x813669c0, 0x04020009, 0x59cc0001, 0x0201f800, + 0x00105c9a, 0x0402001e, 0x0201f800, 0x001045a6, + 0x0402001b, 0x49366009, 0x4a026403, 0x00000087, + 0x59cc1204, 0x82081580, 0x0000ffff, 0x04020003, + 0x4a026403, 0x00000086, 0x4a026203, 0x00000001, + 0x42000800, 0x80000040, 0x0201f800, 0x00020721, + 0x0401f00d, 0x591c0203, 0x82000580, 0x00000007, + 0x040207de, 0x4d300000, 0x411e6000, 0x0201f800, + 0x00107911, 0x5c026000, 0x0401f7d8, 0x0201f800, + 0x00107911, 0x5c023800, 0x1c01f000, 0x4933c857, + 0x480bc857, 0x42002800, 0x0010d1c0, 0x41300000, + 0x80140580, 0x04000017, 0x58140203, 0x82000580, + 0x00000000, 0x04000013, 0x58140202, 0x80080580, + 0x04020010, 0x58141c06, 0x820c0580, 0x00000005, + 0x0400000c, 0x820c0580, 0x00000009, 0x0400001d, + 0x59302009, 0x58140009, 0x800001c0, 0x0400000b, + 0x801021c0, 0x04000003, 0x80100580, 0x04000010, + 0x82142c00, 0x00000024, 0x41540000, 0x80140480, + 0x0402100e, 0x0401f7e2, 0x5814001e, 0x801021c0, + 0x04000005, 0x58102002, 0x82102500, 0x00ffffff, + 0x0401f7f2, 0x5810201e, 0x0401f7f0, 0x40163800, + 0x81300540, 0x0401f002, 0x80000580, 0x1c01f000, + 0x58141807, 0x8c0c1d10, 0x040207ea, 0x0401f7e1, + 0x4933c857, 0x493bc857, 0x83380580, 0x00000013, + 0x0402000e, 0x59300403, 0x82000c80, 0x00000085, + 0x02001800, 0x001005d8, 0x82000c80, 0x00000093, + 0x02021800, 0x001005d8, 0x82000480, 0x00000085, + 0x4803c857, 0x0c01f018, 0x83380580, 0x00000027, + 0x04000005, 0x83380580, 0x00000014, 0x02020000, + 0x00107974, 0x0201f800, 0x00106bbf, 0x59325808, + 0x812e59c0, 0x02000000, 0x00107911, 0x4a025a06, + 0x00000031, 0x4a025811, 0x00000004, 0x4a025812, + 0x000000ff, 0x0201f800, 0x000202da, 0x0201f000, + 0x00107911, 0x0010a1b7, 0x0010a1be, 0x0010a1be, + 0x0010a1b7, 0x0010a1b7, 0x0010a1b7, 0x0010a1b7, + 0x0010a1b7, 0x0010a1b7, 0x0010a1b7, 0x0010a1b7, + 0x0010a1b7, 0x0010a1b7, 0x0010a1b9, 0x0201f800, + 0x001005d8, 0x59325808, 0x4a025a06, 0x00000000, + 0x0201f800, 0x000202da, 0x0201f000, 0x00107911, + 0x4933c857, 0x42000000, 0x0010b873, 0x0201f800, + 0x0010aa47, 0x0201f800, 0x0010a5df, 0x497a6205, + 0x42028000, 0x0000000b, 0x0401f807, 0x4a026406, + 0x00000006, 0x4a026203, 0x00000007, 0x497a6206, + 0x1c01f000, 0x4933c857, 0x4943c857, 0x59300406, + 0x82000580, 0x00000007, 0x04020002, 0x1c01f000, + 0x0201f800, 0x00106c55, 0x4df00000, 0x0201f800, + 0x00108ce5, 0x82000c80, 0x0000000e, 0x02021800, + 0x001005d8, 0x0c01f001, 0x0010a205, 0x0010a209, + 0x0010a1f0, 0x0010a217, 0x0010a22a, 0x0010a1f0, + 0x0010a1f0, 0x0010a1f0, 0x0010a1f0, 0x0010a1f0, + 0x0010a1f0, 0x0010a1f0, 0x0010a1f0, 0x0010a1f0, + 0x4d400000, 0x5930001f, 0x80000540, 0x04000005, + 0x41400800, 0x0201f800, 0x00100d7c, 0x40068000, + 0x4d2c0000, 0x59325808, 0x0201f800, 0x00109037, + 0x040209f3, 0x4c5c0000, 0x5930b809, 0x0201f800, + 0x00107911, 0x485e6009, 0x5c00b800, 0x5c025800, + 0x5c028000, 0x5c03e000, 0x02000000, 0x00106c4b, + 0x1c01f000, 0x598c000d, 0x81300580, 0x04020004, + 0x0201f800, 0x00106e8e, 0x04020016, 0x0201f800, + 0x001068d3, 0x040007df, 0x0201f800, 0x00106b6c, + 0x04000010, 0x0201f800, 0x001005d8, 0x0201f800, + 0x00108cd6, 0x04020004, 0x0201f800, 0x00106e62, + 0x04020008, 0x0201f800, 0x001067ae, 0x040007d1, + 0x0201f800, 0x00106b6c, 0x02020800, 0x001005d8, + 0x59300203, 0x82000c80, 0x0000000e, 0x02021800, + 0x001005d8, 0x0c01f7b9, 0x0201f800, 0x00100e99, + 0x0401f7c4, 0x4933c857, 0x4d440000, 0x4d340000, + 0x59cc0007, 0x0201f800, 0x00105c9a, 0x02000800, + 0x00020245, 0x0402001a, 0x59300009, 0x4c000000, + 0x49366009, 0x42003000, 0x0000000b, 0x0201f800, + 0x0010a942, 0x42000000, 0x0010b861, 0x0201f800, + 0x0010aa47, 0x4d3c0000, 0x4d400000, 0x42028000, + 0x00000029, 0x417a7800, 0x0201f800, 0x0010203c, + 0x5c028000, 0x5c027800, 0x5c000000, 0x48026009, + 0x59cc0007, 0x48026802, 0x80000580, 0x5c026800, + 0x5c028800, 0x1c01f000, 0x4933c857, 0x4c040000, + 0x59a80016, 0x82000580, 0x00000074, 0x04020040, + 0x59cc0a08, 0x82040480, 0x00000100, 0x04001033, + 0x59cc0c08, 0x82040500, 0x00008000, 0x04000035, + 0x59a80032, 0x80000540, 0x04020009, 0x59301009, + 0x58080212, 0x82000500, 0x0000ff00, 0x04000004, + 0x82040500, 0x00000800, 0x0400002a, 0x59cc0c09, + 0x80040840, 0x04001024, 0x59a80826, 0x8c040d06, + 0x04000004, 0x59cc0c0f, 0x8c040d1e, 0x04020012, + 0x59cc0a17, 0x800409c0, 0x04020012, 0x59cc0a18, + 0x82040480, 0x00000100, 0x04001014, 0x59cc0c18, + 0x800409c0, 0x0402000e, 0x59cc0c19, 0x80040840, + 0x04001011, 0x59cc0c1a, 0x80040840, 0x04001011, + 0x0401f018, 0x4a02621a, 0x00000100, 0x0401f012, + 0x4a02621a, 0x00000300, 0x0401f00f, 0x4a02621a, + 0x00000500, 0x0401f00c, 0x4a02621a, 0x00000700, + 0x0401f009, 0x4a02621a, 0x00000900, 0x0401f006, + 0x4a02621a, 0x00000f00, 0x0401f003, 0x4a02621a, + 0x00002d00, 0x82000540, 0x00000001, 0x0401f002, + 0x80000580, 0x5c000800, 0x1c01f000, 0x59cc0407, + 0x4803c857, 0x82000580, 0x00000800, 0x04000003, + 0x4a02621a, 0x00000000, 0x1c01f000, 0x4933c857, + 0x4c040000, 0x4c080000, 0x4c0c0000, 0x4c580000, + 0x59cc000c, 0x0201f800, 0x00105c9a, 0x02000800, + 0x00020245, 0x04020012, 0x83cc1400, 0x00000008, + 0x4200b000, 0x00000002, 0x83341c00, 0x00000006, + 0x0201f800, 0x0010855a, 0x04020009, 0x83cc1400, + 0x0000000a, 0x4200b000, 0x00000002, 0x83341c00, + 0x00000008, 0x0201f800, 0x0010855a, 0x5c00b000, + 0x5c001800, 0x5c001000, 0x5c000800, 0x1c01f000, + 0x4933c857, 0x4c000000, 0x4c040000, 0x4c080000, + 0x4c0c0000, 0x4c580000, 0x59cc0001, 0x0201f800, + 0x00105c9a, 0x02000800, 0x00020245, 0x04020014, + 0x83cc1400, 0x0000000b, 0x4200b000, 0x00000002, + 0x83341c00, 0x00000006, 0x0201f800, 0x0010855a, + 0x0402000c, 0x83cc1400, 0x0000000d, 0x4200b000, + 0x00000002, 0x83341c00, 0x00000008, 0x0201f800, + 0x0010855a, 0x04000014, 0x4933c856, 0x4933c856, + 0x4933c857, 0x59340009, 0x4803c857, 0x5934000e, + 0x4803c857, 0x59340008, 0x4803c857, 0x5934000d, + 0x4803c857, 0x59340007, 0x4803c857, 0x5934000c, + 0x4803c857, 0x59340006, 0x4803c857, 0x5934000b, + 0x4803c857, 0x5c00b000, 0x5c001800, 0x5c001000, + 0x5c000800, 0x5c000000, 0x1c01f000, 0x4933c857, + 0x4947c857, 0x4943c857, 0x4c600000, 0x0201f800, + 0x00106c55, 0x4df00000, 0x4d2c0000, 0x4d300000, + 0x4d340000, 0x4130c000, 0x42026000, 0x0010d1c0, + 0x59a8000e, 0x8060c1c0, 0x04000005, 0x82601580, + 0x0010bde9, 0x04000002, 0x80000040, 0x81640480, + 0x040210be, 0x40600000, 0x81300580, 0x040000b6, + 0x0401f97a, 0x040200b4, 0x59326809, 0x59300406, + 0x82000c80, 0x00000012, 0x02021800, 0x001005d8, + 0x0c01f001, 0x0010a3cd, 0x0010a338, 0x0010a351, + 0x0010a35c, 0x0010a335, 0x0010a34c, 0x0010a387, + 0x0010a3cd, 0x0010a333, 0x0010a39a, 0x0010a3ae, + 0x0010a333, 0x0010a333, 0x0010a333, 0x0010a333, + 0x0010a3cd, 0x0010a3c4, 0x0010a3bc, 0x0201f800, + 0x001005d8, 0x59300420, 0x8c000500, 0x04020096, + 0x59300403, 0x82000580, 0x00000043, 0x04000092, + 0x0201f800, 0x00109134, 0x04000007, 0x0201f800, + 0x0010914e, 0x0402008a, 0x0201f800, 0x0010801c, + 0x0401f087, 0x0201f800, 0x00102074, 0x0201f800, + 0x0010914e, 0x02000800, 0x0010801c, 0x0401f080, + 0x8d3e7d18, 0x04000004, 0x59300420, 0x8c000500, + 0x0402007d, 0x59325808, 0x0201f800, 0x00109037, + 0x04000077, 0x49425a06, 0x497a5c09, 0x0201f800, + 0x000202da, 0x0201f800, 0x0010912a, 0x0401f070, + 0x8d3e7d00, 0x04000007, 0x59300017, 0x81480580, + 0x0402006d, 0x59300018, 0x814c0580, 0x0402006a, + 0x59300203, 0x82000580, 0x00000004, 0x02000800, + 0x00100e99, 0x59325808, 0x0201f800, 0x00109037, + 0x0400005f, 0x4a025a04, 0x00000103, 0x59300004, + 0x8400055c, 0x48026004, 0x592c0408, 0x8c000512, + 0x04000007, 0x4d2c0000, 0x592c0009, 0x40025800, + 0x0201f800, 0x001007fd, 0x5c025800, 0x49425a06, + 0x497a5c09, 0x0401fb16, 0x0201f800, 0x0010959c, + 0x0201f800, 0x001091c6, 0x0201f800, 0x000202da, + 0x0201f800, 0x0010912a, 0x0401f045, 0x8d3e7d18, + 0x04000045, 0x59300203, 0x82000580, 0x00000004, + 0x02000800, 0x00100e99, 0x59325808, 0x0201f800, + 0x00109037, 0x0400003a, 0x49425a06, 0x497a5c09, + 0x0401faff, 0x0201f800, 0x0010959c, 0x0201f800, + 0x000202da, 0x0401f032, 0x0201f800, 0x001062d5, + 0x04000031, 0x59300203, 0x82000580, 0x00000004, + 0x0400002d, 0x59300203, 0x82000580, 0x00000003, + 0x04020029, 0x0201f800, 0x00106b8a, 0x59325808, + 0x0201f800, 0x00109037, 0x04000021, 0x0201f800, + 0x000202da, 0x0401f01e, 0x59300203, 0x82000580, + 0x00000004, 0x02000800, 0x00100e99, 0x59325808, + 0x0201f800, 0x00109037, 0x04000015, 0x49425a06, + 0x497a5c09, 0x0201f800, 0x000202da, 0x0401f010, + 0x833c0500, 0x00001800, 0x0400000f, 0x8d3e7d16, + 0x0402000d, 0x59325817, 0x0201f800, 0x001007fd, + 0x59325808, 0x0201f800, 0x00109037, 0x04000004, + 0x49425a06, 0x0201f800, 0x000202da, 0x0201f800, + 0x00107911, 0x83326400, 0x00000024, 0x41580000, + 0x81300480, 0x0400173b, 0x5c026800, 0x5c026000, + 0x5c025800, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x5c00c000, 0x1c01f000, 0x5c000000, 0x4c000000, + 0x4803c857, 0x4d3c0000, 0x42027800, 0x00000001, + 0x0201f800, 0x00104567, 0x5c027800, 0x4c580000, + 0x4200b000, 0x00000002, 0x83a81c00, 0x00000002, + 0x83cc1400, 0x0000000b, 0x0201f800, 0x0010855a, + 0x5c00b000, 0x80000540, 0x1c01f000, 0x492fc857, + 0x4943c857, 0x59a8000c, 0x812c0480, 0x04001011, + 0x59a8000d, 0x812c0480, 0x0402100e, 0x592c0000, + 0x80005d40, 0x04000008, 0x497a5800, 0x49425a06, + 0x4c2c0000, 0x0201f800, 0x000202da, 0x5c025800, + 0x0401f7f7, 0x49425a06, 0x0201f000, 0x000202da, + 0x1c01f000, 0x493fc857, 0x4933c857, 0x480bc857, + 0x0201f800, 0x00103b25, 0x0400002e, 0x41502800, + 0x813e79c0, 0x04020006, 0x59a80066, 0x80000000, + 0x59a8086a, 0x80040580, 0x04000026, 0x41300000, + 0x80140580, 0x0400001a, 0x58140203, 0x82000580, + 0x00000000, 0x04000016, 0x58140202, 0x80080580, + 0x04020013, 0x58141c06, 0x820c0580, 0x00000005, + 0x0400000f, 0x820c0580, 0x00000009, 0x04000017, + 0x59300009, 0x58142009, 0x801021c0, 0x04020006, + 0x5814201e, 0x59301809, 0x580c0002, 0x82000500, + 0x00ffffff, 0x80100580, 0x04000007, 0x82142c00, + 0x00000024, 0x41540000, 0x80140480, 0x04021005, + 0x0401f7df, 0x40163800, 0x81300540, 0x0401f002, + 0x80000580, 0x1c01f000, 0x58141807, 0x8c0c1d10, + 0x040207f3, 0x0401f7e7, 0x42002000, 0x0000ffff, + 0x59301009, 0x800811c0, 0x04000002, 0x58082403, + 0x41301000, 0x0401f007, 0x41781000, 0x41442000, + 0x0401f004, 0x41781000, 0x42002000, 0x0000ffff, + 0x5c000000, 0x4c000000, 0x4803c857, 0x480bc857, + 0x4813c857, 0x492fc857, 0x4943c857, 0x4d2c0000, + 0x0201f800, 0x001007e4, 0x02000800, 0x001005d8, + 0x4a025a04, 0x0000010d, 0x800811c0, 0x04000017, + 0x83400580, 0x00000029, 0x04020010, 0x82180580, + 0x00000002, 0x0400000a, 0x82180580, 0x00000003, + 0x04000007, 0x82180580, 0x00000008, 0x04000004, + 0x82180580, 0x00000009, 0x04020004, 0x4a025809, + 0xffffffff, 0x0401f002, 0x480a5809, 0x58080202, + 0x48025c13, 0x0401f005, 0x4a025809, 0xffffffff, + 0x4a025c13, 0x0000ffff, 0x49425a08, 0x48125a06, + 0x82100580, 0x0000ffff, 0x0400000e, 0x4d440000, + 0x4d340000, 0x40128800, 0x0201f800, 0x00020245, + 0x02020800, 0x001005d8, 0x59340002, 0x82000500, + 0x00ffffff, 0x48025812, 0x5c026800, 0x5c028800, + 0x497a5800, 0x497a5c04, 0x83400580, 0x00000046, + 0x04020002, 0x48165a07, 0x481a5c08, 0x0401fbed, + 0x5c025800, 0x1c01f000, 0x59300809, 0x800409c0, + 0x04000004, 0x58040403, 0x81440580, 0x1c01f000, + 0x82000540, 0x00000001, 0x0401f7fd, 0x4933c857, + 0x4c040000, 0x59300403, 0x82000d80, 0x0000001e, + 0x04020016, 0x800000d0, 0x59300a16, 0x82040d00, + 0x000000ff, 0x80040540, 0x4803c857, 0x48026416, + 0x4a026403, 0x00000085, 0x4a026203, 0x00000009, + 0x4a026406, 0x00000005, 0x4a02621d, 0x00000004, + 0x59a80038, 0x48026206, 0x42000800, 0x8000004b, + 0x0201f800, 0x00020721, 0x5c000800, 0x1c01f000, + 0x4933c857, 0x40000000, 0x40000000, 0x1c01f000, + 0x59300414, 0x4933c857, 0x4803c857, 0x8c000518, + 0x04000009, 0x8c000512, 0x02020000, 0x0010921e, + 0x0401f91b, 0x0201f800, 0x000206fd, 0x0201f800, + 0x0002077d, 0x1c01f000, 0x591c0406, 0x4803c857, + 0x82000c80, 0x00000009, 0x0402100b, 0x0c01f001, + 0x0010a4d9, 0x0010a4d9, 0x0010a4d9, 0x0010a4db, + 0x0010a4d9, 0x0010a4db, 0x0010a4db, 0x0010a4d9, + 0x0010a4db, 0x80000580, 0x1c01f000, 0x82000540, + 0x00000001, 0x1c01f000, 0x591c0406, 0x82000500, + 0x0000001f, 0x82000580, 0x00000006, 0x0400000e, + 0x4803c857, 0x4a026403, 0x0000003b, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00002a00, 0x4a026203, + 0x00000001, 0x42000800, 0x80000040, 0x0201f000, + 0x00020721, 0x4803c856, 0x4c040000, 0x4c140000, + 0x4d300000, 0x411e6000, 0x0401f8e9, 0x497a6205, + 0x59300414, 0x4803c857, 0x82000500, 0xffffadff, + 0x48026414, 0x497a6405, 0x5c026000, 0x0201f800, + 0x001007e4, 0x02000800, 0x001005d8, 0x5c002800, + 0x5c000800, 0x4a025a04, 0x0000010d, 0x497a5800, + 0x497a5c04, 0x4a025a08, 0x00000045, 0x491e5809, + 0x59300402, 0x48025c07, 0x59300419, 0x48025c0b, + 0x591c0414, 0x84000556, 0x48023c14, 0x591c1809, + 0x580c0403, 0x48025a06, 0x4816580a, 0x48065a0b, + 0x0401f99d, 0x4d400000, 0x42028000, 0x00000045, + 0x591c0202, 0x4c000000, 0x4d300000, 0x411e6000, + 0x0401fcb1, 0x5c026000, 0x5c000000, 0x48023a02, + 0x5c028000, 0x4a023c06, 0x00000006, 0x4a023a03, + 0x00000007, 0x497a3a06, 0x497a3a05, 0x1c01f000, + 0x4933c857, 0x83380580, 0x00000013, 0x0402000b, + 0x59300403, 0x4803c857, 0x82000d80, 0x00000085, + 0x0400002b, 0x82000d80, 0x0000008b, 0x04000028, + 0x0201f800, 0x001005d8, 0x83380580, 0x00000027, + 0x0402000c, 0x0201f800, 0x00106bbf, 0x4d2c0000, + 0x4d400000, 0x59325808, 0x42028000, 0x00000004, + 0x0401feab, 0x5c028000, 0x5c025800, 0x1c01f000, + 0x83380580, 0x00000014, 0x040007f3, 0x83380580, + 0x00000089, 0x04000005, 0x83380580, 0x0000008a, + 0x02020000, 0x00107974, 0x0201f800, 0x00106f60, + 0x02020000, 0x00107974, 0x59300a03, 0x82040580, + 0x0000000a, 0x04000009, 0x82040580, 0x0000000c, + 0x04000006, 0x0201f800, 0x001005d8, 0x4a026203, + 0x0000000a, 0x1c01f000, 0x83380480, 0x00000093, + 0x0402100c, 0x83380480, 0x00000085, 0x04001009, + 0x83380580, 0x00000089, 0x0400000a, 0x83380580, + 0x0000008a, 0x04000022, 0x0201f800, 0x001005d8, + 0x493bc857, 0x4933c857, 0x0201f000, 0x00107974, + 0x4933c857, 0x4c340000, 0x41306800, 0x0201f800, + 0x0002075a, 0x04000011, 0x4a026203, 0x00000001, + 0x4a026403, 0x0000001e, 0x59cc0c07, 0x48066419, + 0x59cc0a07, 0x48066219, 0x58340809, 0x48066009, + 0x4a026406, 0x00000004, 0x42000800, 0x80000040, + 0x0201f800, 0x00020721, 0x40366000, 0x0201f800, + 0x0002077d, 0x5c006800, 0x1c01f000, 0x4933c857, + 0x0201f000, 0x0002077d, 0x4933c857, 0x59300809, + 0x58040200, 0x8c00051a, 0x1c01f000, 0x0201f800, + 0x001048df, 0x0400001e, 0x4a026203, 0x00000002, + 0x59300414, 0x84000558, 0x48026414, 0x8c000512, + 0x04000004, 0x59a80039, 0x48026205, 0x0401f007, + 0x59a80839, 0x59a80037, 0x80040400, 0x82000400, + 0x0000000a, 0x48026205, 0x59300009, 0x82000c00, + 0x00000011, 0x50040000, 0x80000540, 0x04000004, + 0x82000c00, 0x00000000, 0x0401f7fb, 0x45300800, + 0x497a6000, 0x82000540, 0x00000001, 0x1c01f000, + 0x82100500, 0xfffffeef, 0x04020020, 0x4d2c0000, + 0x4937c857, 0x59340811, 0x83341400, 0x00000011, + 0x800409c0, 0x0400000e, 0x40040000, 0x81300580, + 0x04000005, 0x58040800, 0x82041400, 0x00000000, + 0x0401f7f8, 0x59300800, 0x497a6000, 0x44041000, + 0x0201f800, 0x000206fd, 0x0401f002, 0x4933c857, + 0x592c0000, 0x80000540, 0x02020800, 0x001005d8, + 0x5c025800, 0x492e6008, 0x0201f800, 0x000206fd, + 0x0201f000, 0x0002077d, 0x492fc857, 0x4a025a06, + 0x00000006, 0x0201f000, 0x000202da, 0x4c340000, + 0x59300009, 0x800001c0, 0x04000010, 0x82006c00, + 0x00000011, 0x50340000, 0x80000540, 0x04000009, + 0x81300580, 0x04000005, 0x50340000, 0x82006c00, + 0x00000000, 0x0401f7f8, 0x59300000, 0x44006800, + 0x5c006800, 0x1c01f000, 0x59300c06, 0x82040580, + 0x00000005, 0x040007fb, 0x82040580, 0x00000011, + 0x040007f8, 0x82040580, 0x00000006, 0x040007f5, + 0x82040580, 0x00000001, 0x040007f2, 0x0201f800, + 0x001005d8, 0x4933c857, 0x4c080000, 0x4c0c0000, + 0x4c580000, 0x59a8101d, 0x59cc1807, 0x820c1d00, + 0x00ffffff, 0x800c0110, 0x80083580, 0x04020014, + 0x83cc1400, 0x00000008, 0x4200b000, 0x00000002, + 0x59300009, 0x82001c00, 0x00000006, 0x0201f800, + 0x0010855a, 0x0402000a, 0x83cc1400, 0x0000000a, + 0x4200b000, 0x00000002, 0x59300009, 0x82001c00, + 0x00000008, 0x0201f800, 0x0010855a, 0x5c00b000, + 0x5c001800, 0x5c001000, 0x1c01f000, 0x4933c856, + 0x0201f800, 0x0010421b, 0x0201f000, 0x00101e45, + 0x493bc857, 0x4d2c0000, 0x0201f800, 0x001007e4, + 0x02000800, 0x001005d8, 0x832cac00, 0x00000005, + 0x4c580000, 0x4c540000, 0x4200b000, 0x00000006, + 0x4578a800, 0x8054a800, 0x8058b040, 0x040207fd, + 0x83380580, 0x00000046, 0x04020004, 0x4a025a04, + 0x00000144, 0x0401f008, 0x4a025a04, 0x00000146, + 0x83380580, 0x00000041, 0x04000003, 0x4a025a06, + 0x00000001, 0x59cc0007, 0x82000500, 0xff000000, + 0x80000110, 0x59cc1008, 0x82081500, 0xff000000, + 0x80081540, 0x480a580a, 0x83380580, 0x00000046, + 0x04020006, 0x59cc0007, 0x82000500, 0x00ffffff, + 0x4802580b, 0x0401f005, 0x59cc0008, 0x82000500, + 0x00ffffff, 0x4802580b, 0x83380580, 0x00000046, + 0x04020004, 0x83cc1400, 0x00000009, 0x0401f003, + 0x83cc1400, 0x0000000d, 0x50080000, 0x9c0001c0, + 0x4802580c, 0x80081000, 0x50080000, 0x9c0001c0, + 0x4802580d, 0x83380580, 0x00000046, 0x04020008, + 0x59cc000b, 0x9c0001c0, 0x4802580e, 0x59cc000c, + 0x9c0001c0, 0x4802580f, 0x0401f007, 0x59cc000f, + 0x9c0001c0, 0x4802580e, 0x59cc0010, 0x9c0001c0, + 0x4802580f, 0x83380580, 0x00000046, 0x04020004, + 0x83cc1400, 0x00000011, 0x0401f003, 0x83cc1400, + 0x00000015, 0x412c3000, 0x82183400, 0x00000010, + 0x4200b000, 0x00000004, 0x50080000, 0x9c0001c0, + 0x44003000, 0x80081000, 0x80183000, 0x8058b040, + 0x040207fa, 0x5c00a800, 0x5c00b000, 0x0201f800, + 0x000202da, 0x5c025800, 0x1c01f000, 0x4933c857, + 0x492fc857, 0x59300809, 0x58040200, 0x8c00051e, + 0x04000004, 0x592c0208, 0x84000558, 0x48025a08, + 0x1c01f000, 0x59e0180f, 0x599c0413, 0x800c1000, + 0x80080580, 0x04020002, 0x41781000, 0x59e00010, + 0x59e00810, 0x80040d80, 0x040207fd, 0x80080580, + 0x0400000b, 0x4c080000, 0x599c0814, 0x599c1015, + 0x800c00cc, 0x80040c00, 0x82081440, 0x00000000, + 0x5c001800, 0x82000540, 0x00000001, 0x4803c857, + 0x1c01f000, 0x492fc857, 0x42007000, 0x0010b7f8, + 0x58380807, 0x800409c0, 0x04020005, 0x492c7008, + 0x492c7007, 0x0201f000, 0x00100875, 0x492c0800, + 0x492c7007, 0x1c01f000, 0x59300203, 0x4933c857, + 0x4937c857, 0x493bc857, 0x4803c857, 0x82003480, + 0x0000000e, 0x02021800, 0x001005d8, 0x0c01f001, + 0x0010a6da, 0x0010a82c, 0x0010a6da, 0x0010a6da, + 0x0010a6da, 0x0010a6da, 0x0010a6da, 0x0010a791, + 0x0010a6dc, 0x0010a6da, 0x0010a6da, 0x0010a6da, + 0x0010a6da, 0x0010a6da, 0x0201f800, 0x001005d8, + 0x83380580, 0x0000004c, 0x02020800, 0x001005d8, + 0x0201f800, 0x001048ec, 0x04020020, 0x59a80826, + 0x82040500, 0x00000009, 0x82000580, 0x00000008, + 0x0400001a, 0x8c040d12, 0x0400003d, 0x59cc0806, + 0x82040d00, 0xff000000, 0x82040580, 0x03000000, + 0x0400001f, 0x82040580, 0x50000000, 0x04000005, + 0x82040580, 0x52000000, 0x02020000, 0x0002077d, + 0x813669c0, 0x04000006, 0x4d3c0000, 0x417a7800, + 0x0201f800, 0x0010203c, 0x5c027800, 0x4a026403, + 0x00000001, 0x0401f014, 0x59cc0806, 0x82040d00, + 0xff000000, 0x82040580, 0x03000000, 0x04000008, + 0x82040580, 0x50000000, 0x04000005, 0x82040580, + 0x52000000, 0x02020000, 0x0002077d, 0x4a026403, + 0x00000009, 0x4a02641a, 0x00000009, 0x4a02621a, + 0x00000000, 0x813669c0, 0x0402000b, 0x59cc0001, + 0x0201f800, 0x00105c9a, 0x02020000, 0x0002077d, + 0x0201f800, 0x001045a6, 0x02020000, 0x0002077d, + 0x49366009, 0x4a026406, 0x00000004, 0x4a026203, + 0x00000001, 0x0201f000, 0x0010672b, 0x0201f800, + 0x00103b25, 0x04000023, 0x59cc0806, 0x4807c857, + 0x82040d00, 0xff000000, 0x82040580, 0x03000000, + 0x04000033, 0x82040580, 0x20000000, 0x04000041, + 0x82040580, 0x21000000, 0x04000052, 0x82040580, + 0x24000000, 0x0400004f, 0x82040580, 0x50000000, + 0x0400004c, 0x82040580, 0x52000000, 0x04000049, + 0x82040580, 0x05000000, 0x0402000d, 0x59cc0806, + 0x82040d00, 0xff000000, 0x9c0431c0, 0x42028000, + 0x00000046, 0x42002800, 0x00000001, 0x0401fcf3, + 0x0401f93c, 0x02000800, 0x001005d8, 0x42002000, + 0x00000051, 0x0201f800, 0x00107a4a, 0x59cc0000, + 0x82000500, 0x00ffffff, 0x82000580, 0x00ffffff, + 0x04000005, 0x4a026203, 0x00000007, 0x493a6403, + 0x1c01f000, 0x59325817, 0x812e59c0, 0x02020800, + 0x001007fd, 0x0201f000, 0x0002077d, 0x813669c0, + 0x040007df, 0x59340400, 0x82000500, 0x000000ff, + 0x82000580, 0x00000003, 0x040207d9, 0x0401fc6f, + 0x040207d7, 0x4a026403, 0x00000009, 0x4a02641a, + 0x0000000e, 0x4a02621a, 0x00001900, 0x0401f7a2, + 0x813669c0, 0x0400000c, 0x59340c00, 0x82040500, + 0x000000ff, 0x82000580, 0x00000009, 0x04000794, + 0x82040500, 0x0000ff00, 0x82000580, 0x00000700, + 0x040207c3, 0x4a026403, 0x00000009, 0x4a02641a, + 0x00000009, 0x4a02621a, 0x00001e00, 0x0401f78e, + 0x813669c0, 0x040007f8, 0x59340c00, 0x82040500, + 0x0000ff00, 0x82000580, 0x00000700, 0x040007f2, + 0x0401f7b3, 0x4d2c0000, 0x4c580000, 0x4c500000, + 0x4c540000, 0x41385000, 0x83380580, 0x00000054, + 0x02020800, 0x001005d8, 0x59325808, 0x592c0c0b, + 0x82040d00, 0x0000e000, 0x82040580, 0x00002000, + 0x04020076, 0x59300817, 0x800409c0, 0x04000014, + 0x58041404, 0x41cca800, 0x8204a400, 0x00000005, + 0x82080480, 0x00000010, 0x04021004, 0x4008b000, + 0x0401fb6b, 0x0401f00a, 0x40001000, 0x4200b000, + 0x0000000f, 0x0401fb66, 0x58040801, 0x800409c0, + 0x040207f2, 0x0201f800, 0x001005d8, 0x813669c0, + 0x0400005e, 0x59344c00, 0x592c0c09, 0x4807c857, + 0x4827c857, 0x82040d00, 0x000000ff, 0x82040580, + 0x00000003, 0x0400002a, 0x82040580, 0x00000005, + 0x04000032, 0x82040580, 0x00000020, 0x04000036, + 0x82040580, 0x00000052, 0x04000042, 0x82040580, + 0x00000050, 0x04000042, 0x82040580, 0x00000021, + 0x04000004, 0x82040580, 0x00000024, 0x04020043, + 0x82240500, 0x0000ff00, 0x82000580, 0x00000007, + 0x04000008, 0x42000800, 0x00000009, 0x0201f800, + 0x00104571, 0x42005000, 0x0000000c, 0x0401f037, + 0x4a025a06, 0x00000031, 0x4a02580d, 0x00000009, + 0x59340400, 0x4802580e, 0x0201f800, 0x000202da, + 0x0201f800, 0x00107911, 0x0401f03d, 0x0201f800, + 0x001042b4, 0x0201f800, 0x0010462a, 0x42000800, + 0x00000003, 0x0201f800, 0x00104571, 0x42005000, + 0x00000008, 0x0401f021, 0x59cc0007, 0x0201f800, + 0x00105eec, 0x0402001d, 0x0201f800, 0x001042b4, + 0x0401f01a, 0x82240500, 0x0000ff00, 0x82000580, + 0x00000007, 0x040007df, 0x82240500, 0x000000ff, + 0x82000580, 0x00000009, 0x040007da, 0x0201f800, + 0x0010468d, 0x42005000, 0x0000000a, 0x0401f00b, + 0x42005000, 0x0000000e, 0x0401f003, 0x42005000, + 0x00000010, 0x82240500, 0x0000ff00, 0x82000580, + 0x00000007, 0x040007cb, 0x482a6403, 0x4a026203, + 0x00000001, 0x592c000d, 0x48026011, 0x497a6013, + 0x59a80038, 0x48026206, 0x417a7800, 0x0201f800, + 0x0010672b, 0x59325817, 0x812e59c0, 0x04000004, + 0x0201f800, 0x001007fd, 0x497a6017, 0x5c00a800, + 0x5c00a000, 0x5c00b000, 0x5c025800, 0x1c01f000, + 0x4d2c0000, 0x59325808, 0x83380580, 0x00000013, + 0x04020029, 0x59300c03, 0x82040580, 0x00000054, + 0x0400001e, 0x82040580, 0x00000010, 0x04000018, + 0x82040580, 0x0000000e, 0x04000015, 0x82040580, + 0x00000008, 0x0400000d, 0x82040580, 0x0000000c, + 0x0400000a, 0x82040580, 0x0000000a, 0x02020800, + 0x001005d8, 0x42000800, 0x00000006, 0x0201f800, + 0x00104571, 0x0401f009, 0x42000800, 0x00000004, + 0x0201f800, 0x00104571, 0x0401f004, 0x59340200, + 0x8400051a, 0x48026a00, 0x4a025a06, 0x00000000, + 0x0201f800, 0x000202da, 0x0201f800, 0x0002077d, + 0x0401f022, 0x83380580, 0x00000027, 0x0400000e, + 0x83380580, 0x00000014, 0x02020800, 0x001005d8, + 0x0201f800, 0x00106bbf, 0x42028000, 0x00000031, + 0x42000800, 0x00000004, 0x42001000, 0x000000ff, + 0x0401f009, 0x0201f800, 0x00106bbf, 0x42028000, + 0x00000031, 0x42000800, 0x00000004, 0x42001000, + 0x00000010, 0x49425a06, 0x4806580d, 0x480a580e, + 0x0201f800, 0x000202da, 0x0201f800, 0x00104c19, + 0x0201f800, 0x00107911, 0x5c025800, 0x1c01f000, + 0x42007000, 0x0010b7f8, 0x58380807, 0x800409c0, + 0x04020005, 0x492c7008, 0x492c7007, 0x0201f000, + 0x00100875, 0x492c0800, 0x492c7007, 0x1c01f000, + 0x4d2c0000, 0x4c580000, 0x4c500000, 0x4c540000, + 0x4933c857, 0x4937c857, 0x59cc0806, 0x4807c857, + 0x82040d00, 0xff000000, 0x82040580, 0x03000000, + 0x0400000d, 0x82040580, 0x05000000, 0x0400000a, + 0x82040580, 0x21000000, 0x04000030, 0x82040580, + 0x24000000, 0x0400002d, 0x82040580, 0x20000000, + 0x0402002f, 0x0201f800, 0x001007e4, 0x0400002c, + 0x492fc857, 0x492e6017, 0x59a8b016, 0x8258b400, + 0x0000001b, 0x8258b500, 0xfffffffc, 0x8058b104, + 0x485a5c04, 0x412c7800, 0x41cca000, 0x82580480, + 0x00000010, 0x04021005, 0x832cac00, 0x00000005, + 0x0401fa63, 0x0401f015, 0x40580800, 0x4200b000, + 0x0000000f, 0x832cac00, 0x00000005, 0x0401fa5c, + 0x8204b480, 0x0000000f, 0x0201f800, 0x001007e4, + 0x04000004, 0x492c7801, 0x412c7800, 0x0401f7ec, + 0x59325817, 0x0201f800, 0x001007fd, 0x497a6017, + 0x80000580, 0x0401f006, 0x59340200, 0x84000554, + 0x48026a00, 0x82000540, 0x00000001, 0x5c00a800, + 0x5c00a000, 0x5c00b000, 0x5c025800, 0x1c01f000, + 0x4933c857, 0x492fc857, 0x4d2c0000, 0x59300a03, + 0x82040580, 0x00000007, 0x04000036, 0x82040580, + 0x00000001, 0x02020800, 0x001005d8, 0x0201f800, + 0x00106c55, 0x4df00000, 0x598c000d, 0x81300580, + 0x04020016, 0x59300004, 0x8c000520, 0x04000004, + 0x84000520, 0x48026004, 0x0401f016, 0x42001000, + 0x0010b7f6, 0x50081000, 0x58080002, 0x82000580, + 0x00000100, 0x04000006, 0x5808000c, 0x81300580, + 0x02020800, 0x001005d8, 0x0401f00a, 0x0201f800, + 0x00106e8e, 0x04020020, 0x59300004, 0x8c000520, + 0x04000004, 0x84000520, 0x48026004, 0x0401f003, + 0x0201f800, 0x001068d3, 0x5c03e000, 0x02000800, + 0x00106c4b, 0x0201f800, 0x00109037, 0x02000800, + 0x001005d8, 0x59325808, 0x4a025a06, 0x00000005, + 0x0201f800, 0x000202da, 0x0201f800, 0x00104c19, + 0x59325817, 0x812e59c0, 0x02020800, 0x001007fd, + 0x0201f800, 0x00107911, 0x80000580, 0x5c025800, + 0x1c01f000, 0x5c03e000, 0x02000800, 0x00106c4b, + 0x59300406, 0x82000580, 0x00000011, 0x040007b8, + 0x0401f7f7, 0x4c040000, 0x59340200, 0x4803c857, + 0x8c00051c, 0x04000009, 0x59cc0805, 0x591c0019, + 0x4803c857, 0x80040580, 0x04000004, 0x80000580, + 0x4803c856, 0x0401f003, 0x82000540, 0x00000001, + 0x5c000800, 0x1c01f000, 0x4c000000, 0x4c0c0000, + 0x4c100000, 0x42001800, 0x0000ffff, 0x42002000, + 0x00000004, 0x0401f010, 0x4c000000, 0x4c0c0000, + 0x4c100000, 0x59302009, 0x58101c03, 0x42002000, + 0x00000004, 0x0401f008, 0x4c000000, 0x4c0c0000, + 0x4c100000, 0x59302009, 0x58101c03, 0x42002000, + 0x00000007, 0x480fc857, 0x4813c857, 0x481bc857, + 0x0201f800, 0x00103aae, 0x5c002000, 0x5c001800, + 0x5c000000, 0x1c01f000, 0x83380580, 0x00000092, + 0x02020800, 0x001005d8, 0x42000800, 0x80000040, + 0x4a026203, 0x00000001, 0x493a6403, 0x0201f000, + 0x00020721, 0x4d400000, 0x0201f800, 0x00103b25, + 0x04000008, 0x59a80005, 0x84000544, 0x48035005, + 0x42028000, 0x0000002a, 0x0201f800, 0x0010a449, + 0x5c028000, 0x1c01f000, 0x59a80026, 0x8c000508, + 0x04000005, 0x599c0017, 0x8c00050a, 0x04020002, + 0x1c01f000, 0x82000540, 0x00000001, 0x1c01f000, + 0x59300420, 0x84000540, 0x48026420, 0x1c01f000, + 0x4817c857, 0x4c000000, 0x4c040000, 0x8c142d2a, + 0x04000004, 0x598800b8, 0x80000000, 0x480310b8, + 0x8c142d2e, 0x04000004, 0x598800b9, 0x80000000, + 0x480310b9, 0x8c142d2c, 0x04000013, 0x40140000, + 0x82000500, 0x00070000, 0x82000d80, 0x00030000, + 0x0400000d, 0x82000d80, 0x00040000, 0x0400000a, + 0x82000d80, 0x00050000, 0x04000007, 0x59880005, + 0x80000000, 0x48031005, 0x598800ba, 0x80000000, + 0x480310ba, 0x5c000800, 0x5c000000, 0x1c01f000, + 0x4817c857, 0x4c000000, 0x4c040000, 0x8c142d2a, + 0x04000004, 0x598800bb, 0x80000000, 0x480310bb, + 0x8c142d2e, 0x04000004, 0x598800bc, 0x80000000, + 0x480310bc, 0x8c142d2c, 0x04000013, 0x40140000, + 0x82000500, 0x00070000, 0x82000d80, 0x00030000, + 0x0400000d, 0x82000d80, 0x00040000, 0x0400000a, + 0x82000d80, 0x00050000, 0x04000007, 0x59880005, + 0x80000000, 0x48031005, 0x598800bd, 0x80000000, + 0x480310bd, 0x5c000800, 0x5c000000, 0x1c01f000, + 0x4c000000, 0x59880001, 0x80000000, 0x4803c857, + 0x48031001, 0x5c000000, 0x1c01f000, 0x4c000000, + 0x59880000, 0x80000000, 0x4803c857, 0x48031000, + 0x5c000000, 0x1c01f000, 0x4c000000, 0x59880002, + 0x80000000, 0x4803c857, 0x48031002, 0x5c000000, + 0x1c01f000, 0x4807c857, 0x4c000000, 0x8c040d2c, + 0x04000004, 0x598800a6, 0x80000000, 0x480310a6, + 0x8c040d2a, 0x04000004, 0x598800a7, 0x80000000, + 0x480310a7, 0x8c040d28, 0x04000004, 0x598800a8, + 0x80000000, 0x480310a8, 0x8c040d26, 0x04000004, + 0x598800a9, 0x80000000, 0x480310a9, 0x8c040d24, + 0x04000004, 0x598800aa, 0x80000000, 0x480310aa, + 0x8c040d22, 0x04000004, 0x598800ab, 0x80000000, + 0x480310ab, 0x8c040d20, 0x04000004, 0x598800ac, + 0x80000000, 0x480310ac, 0x5c000000, 0x1c01f000, + 0x4807c857, 0x4c000000, 0x598800ad, 0x80000000, + 0x480310ad, 0x5c000000, 0x1c01f000, 0x4807c857, + 0x4c000000, 0x8c040d1c, 0x04000004, 0x598800ae, + 0x80000000, 0x480310ae, 0x8c040d1a, 0x04000004, + 0x598800af, 0x80000000, 0x480310af, 0x5c000000, + 0x1c01f000, 0x4807c857, 0x4c000000, 0x8c040d18, + 0x04000004, 0x598800b0, 0x80000000, 0x480310b0, + 0x8c040d16, 0x04000004, 0x598800b1, 0x80000000, + 0x480310b1, 0x8c040d14, 0x04000004, 0x598800b2, + 0x80000000, 0x480310b2, 0x5c000000, 0x1c01f000, + 0x4807c857, 0x4c000000, 0x8c040d10, 0x04000004, + 0x598800b3, 0x80000000, 0x480310b3, 0x8c040d0c, + 0x04000004, 0x598800b4, 0x80000000, 0x480310b4, + 0x5c000000, 0x1c01f000, 0x4807c857, 0x4c000000, + 0x8c040d08, 0x04000004, 0x598800b5, 0x80000000, + 0x480310b5, 0x8c040d04, 0x04000004, 0x598800b6, + 0x80000000, 0x480310b6, 0x5c000000, 0x1c01f000, + 0x4807c856, 0x4c000000, 0x5988007f, 0x80000000, + 0x4803107f, 0x5c000000, 0x1c01f000, 0x4803c857, + 0x4c040000, 0x50000800, 0x80040800, 0x4807c857, + 0x44040000, 0x5c000800, 0x1c01f000, 0x480fc857, + 0x4c000000, 0x820c0580, 0x00000000, 0x04020004, + 0x42000000, 0x0010b819, 0x0401f014, 0x820c0580, + 0x00001001, 0x04020004, 0x42000000, 0x0010b81a, + 0x0401f00e, 0x820c0580, 0x00001002, 0x04020004, + 0x42000000, 0x0010b81b, 0x0401f008, 0x820c0c80, + 0x0000201c, 0x02021800, 0x001005d8, 0x820c0500, + 0x0000001f, 0x0c01f804, 0x0401ffdd, 0x5c000000, + 0x1c01f000, 0x0010aa89, 0x0010aa8c, 0x0010aa8f, + 0x0010aa92, 0x0010aa95, 0x0010aa98, 0x0010aa9b, + 0x0010aa9e, 0x0010aaa1, 0x0010aaa4, 0x0010aaa7, + 0x0010aaaa, 0x0010aaad, 0x0010aab0, 0x0010aab3, + 0x0010aab6, 0x0010aab9, 0x0010aabc, 0x0010aabf, + 0x0010aac2, 0x0010aac5, 0x0010aac8, 0x0010aacb, + 0x0010aace, 0x0010aad1, 0x0010aad4, 0x0010aad7, + 0x0010aada, 0x42000000, 0x0010b81c, 0x1c01f000, + 0x42000000, 0x0010b81d, 0x1c01f000, 0x42000000, + 0x0010b81e, 0x1c01f000, 0x42000000, 0x0010b81f, + 0x1c01f000, 0x42000000, 0x0010b820, 0x1c01f000, + 0x42000000, 0x0010b821, 0x1c01f000, 0x42000000, + 0x0010b822, 0x1c01f000, 0x42000000, 0x0010b823, + 0x1c01f000, 0x42000000, 0x0010b824, 0x1c01f000, + 0x42000000, 0x0010b825, 0x1c01f000, 0x42000000, + 0x0010b826, 0x1c01f000, 0x42000000, 0x0010b827, + 0x1c01f000, 0x42000000, 0x0010b828, 0x1c01f000, + 0x42000000, 0x0010b829, 0x1c01f000, 0x42000000, + 0x0010b82a, 0x1c01f000, 0x42000000, 0x0010b82b, + 0x1c01f000, 0x42000000, 0x0010b82c, 0x1c01f000, + 0x42000000, 0x0010b82d, 0x1c01f000, 0x42000000, + 0x0010b82e, 0x1c01f000, 0x42000000, 0x0010b82f, + 0x1c01f000, 0x42000000, 0x0010b830, 0x1c01f000, + 0x42000000, 0x0010b831, 0x1c01f000, 0x42000000, + 0x0010b832, 0x1c01f000, 0x42000000, 0x0010b833, + 0x1c01f000, 0x42000000, 0x0010b834, 0x1c01f000, + 0x42000000, 0x0010b835, 0x1c01f000, 0x42000000, + 0x0010b836, 0x1c01f000, 0x42000000, 0x0010b837, + 0x1c01f000, 0x480fc857, 0x4c000000, 0x820c0580, + 0x00000001, 0x04020004, 0x42000000, 0x0010b80e, + 0x0401f012, 0x820c0580, 0x00000002, 0x04020004, + 0x42000000, 0x0010b80f, 0x0401f00c, 0x820c0580, + 0x00000003, 0x04020004, 0x42000000, 0x0010b810, + 0x0401f006, 0x820c0580, 0x00000004, 0x04020004, + 0x42000000, 0x0010b811, 0x0401ff51, 0x5c000000, + 0x1c01f000, 0x4c000000, 0x59a80026, 0x4803c857, + 0x8c000502, 0x04000010, 0x8c000506, 0x04000004, + 0x42000000, 0x0010b841, 0x0401f012, 0x8c00050a, + 0x04000004, 0x42000000, 0x0010b840, 0x0401f00d, + 0x8c000508, 0x04000004, 0x42000000, 0x0010b843, + 0x0401f008, 0x0201f800, 0x0010513b, 0x04000006, + 0x8c000506, 0x04020004, 0x42000000, 0x0010b842, + 0x0401ff33, 0x5c000000, 0x1c01f000, 0x8058b1c0, + 0x02000800, 0x001005d8, 0x5450a800, 0x8050a000, + 0x8054a800, 0x8058b040, 0x040207fc, 0x1c01f000, + 0x8058b1c0, 0x02000800, 0x001005d8, 0x4450a800, + 0x8054a800, 0x8058b040, 0x040207fd, 0x1c01f000, + 0x8058b1c0, 0x02000800, 0x001005d8, 0x50500000, + 0x9c0001c0, 0x4400a800, 0x8050a000, 0x8054a800, + 0x8058b040, 0x040207fa, 0x1c01f000, 0x4c000000, + 0x59a80008, 0x8c00051c, 0x5c000000, 0x1c01f000, + 0x00000001, 0x00000002, 0x00000004, 0x00000008, + 0x00000010, 0x00000020, 0x00000040, 0x00000080, + 0x00000100, 0x00000200, 0x00000400, 0x00000800, + 0x00001000, 0x00002000, 0x00004000, 0x00008000, + 0x00010000, 0xa5f2b3ac +}; + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_length01 = 0x0000ab4a ; +#else +uint32_t risc_code_length01 = 0x0000ab4a ; +#endif + + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_addr02 = 0x0010e000 ; +#else +uint32_t risc_code_addr02 = 0x0010e000 ; +#endif + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_code02[] = { +#else +uint32_t risc_code02[] = { +#endif + 0x00000000, 0x00000000, 0x0010e000, 0x000014ff, + 0x00000000, 0x00000000, 0x00020000, 0x000008c0, + 0x836c0580, 0x00000003, 0x02020000, 0x001002e3, + 0x42000000, 0x0010b4bb, 0x50000000, 0x800001c0, + 0x04020956, 0x0401f923, 0x0401fbe3, 0x0401fb5c, + 0x0201f800, 0x00020718, 0x0201f800, 0x0002057b, + 0x0401f7f0, 0x59b800ea, 0x82000d00, 0xf0000038, + 0x02020000, 0x00100a7a, 0x8c000510, 0x02000000, + 0x00100a79, 0x59ba60e0, 0x81300182, 0x0402104e, + 0x04002030, 0x8532653e, 0x59300406, 0x82000580, + 0x00000003, 0x04020028, 0x59300203, 0x82000580, + 0x00000004, 0x04020024, 0x59325808, 0x59300402, + 0x4a025a04, 0x00000103, 0x900001c0, 0x48025806, + 0x497a5807, 0x497a5c09, 0x5930001f, 0x80000540, + 0x02020800, 0x00100d56, 0x59300004, 0x8c00053e, + 0x04020010, 0x0401fa88, 0x59326809, 0x0201f800, + 0x0002077d, 0x5934000f, 0x5934140b, 0x80081040, + 0x04001002, 0x480a6c0b, 0x80000540, 0x04020a10, + 0x59b800ea, 0x8c000510, 0x040207d7, 0x1c01f000, + 0x0201f800, 0x00106f60, 0x040007ef, 0x0201f000, + 0x00100a65, 0x42027000, 0x00000055, 0x0401f027, + 0x83326500, 0x3fffffff, 0x59300406, 0x82000580, + 0x00000003, 0x04020015, 0x59325808, 0x59326809, + 0x59301402, 0x4a025a04, 0x00000103, 0x900811c0, + 0x480a5806, 0x497a5c09, 0x497a5807, 0x0401fa62, + 0x0201f800, 0x0002077d, 0x5934000f, 0x5934140b, + 0x80081040, 0x04001002, 0x480a6c0b, 0x80000540, + 0x040209eb, 0x0401f7db, 0x42027000, 0x00000054, + 0x0401f00a, 0x83300500, 0x60000000, 0x02000000, + 0x00100a68, 0x81326580, 0x8000013a, 0x82000400, + 0x00100a80, 0x50027000, 0x59300c06, 0x82040580, + 0x00000002, 0x02000000, 0x00100a65, 0x59300004, + 0x8c00053e, 0x04020004, 0x0201f800, 0x000207a1, + 0x0401f7c4, 0x0201f800, 0x00106f60, 0x040007fb, + 0x0201f000, 0x00100a65, 0x59325808, 0x412c7000, + 0x58380a04, 0x82040500, 0x0000000f, 0x82000c00, + 0x001010bd, 0x50044000, 0x0c01f001, 0x00100dd9, + 0x00100dd9, 0x0002009f, 0x00100dd9, 0x00100dd9, + 0x00100dd9, 0x00100dd9, 0x00100dd9, 0x000200af, + 0x00100ded, 0x00100dd9, 0x00100dd9, 0x00100ddb, + 0x00100dd9, 0x00100dd9, 0x00100dd9, 0x5838040a, + 0x8c000500, 0x02000800, 0x001005d8, 0x50200000, + 0x80387c00, 0x583c1002, 0x583c2800, 0x583c2001, + 0x58380a07, 0x5838300f, 0x59303807, 0x58384c08, + 0x5838000d, 0x48026012, 0x0401f010, 0x5838020a, + 0x8c000502, 0x02000000, 0x00100dd9, 0x50200000, + 0x80387c00, 0x583c2800, 0x583c2001, 0x583c1002, + 0x592c0a07, 0x592c4c08, 0x592c300f, 0x59303807, + 0x497a6012, 0x497a6013, 0x4816600e, 0x4812600f, + 0x480a6010, 0x481a6011, 0x80040840, 0x4806600d, + 0x02020000, 0x00100e1a, 0x841c3d40, 0x481e6007, + 0x1c01f000, 0x41787800, 0x59325808, 0x592c0c0a, + 0x8c040d02, 0x02000000, 0x00100f8c, 0x592c000d, + 0x592c100f, 0x592c0a04, 0x480a6011, 0x48026012, + 0x48026013, 0x412c3000, 0x82040500, 0x0000000f, + 0x82000400, 0x001010bd, 0x50003800, 0x501c0000, + 0x401c1000, 0x592c1a07, 0x4802600a, 0x481a600b, + 0x480a600c, 0x480e600d, 0x843c7d4a, 0x403c1000, + 0x1c01f000, 0x41787800, 0x497a6012, 0x592c0a04, + 0x412c3000, 0x592c1a07, 0x82040500, 0x0000000f, + 0x82000400, 0x001010bd, 0x50004000, 0x50200000, + 0x40201000, 0x4802600a, 0x481a600b, 0x480a600c, + 0x480e600d, 0x80000580, 0x483e6004, 0x1c01f000, + 0x4c000000, 0x4df00000, 0x0201f800, 0x00020729, + 0x0401f005, 0x4c000000, 0x4df00000, 0x0401ff16, + 0x0401f001, 0x5c03e000, 0x5c000000, 0x1801f000, + 0x4203e000, 0xb0100000, 0x41fc0000, 0x82000500, + 0x00000011, 0x0c01f001, 0x0002012a, 0x00020697, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0010115a, 0x0002012c, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0002012a, 0x0002012a, + 0x0002012a, 0x0002012a, 0x0201f800, 0x001005d8, + 0x0201f800, 0x00020697, 0x0201f000, 0x0010115a, + 0x42000000, 0x0010b4c1, 0x50000000, 0x8c000504, + 0x04000014, 0x42000000, 0x0010b4c1, 0x50000000, + 0x8c000502, 0x04020002, 0x1c01f000, 0x4df00000, + 0x4203e000, 0x50000000, 0x42034000, 0x0010b4a4, + 0x59a0001d, 0x59a1d81e, 0x84000502, 0x4803401d, + 0x58ec0009, 0x0801f800, 0x5c03e000, 0x1c01f000, + 0x04027002, 0x04026002, 0x1c01f000, 0x4df00000, + 0x4203e000, 0x50000000, 0x0201f800, 0x001007e4, + 0x04000010, 0x412dd800, 0x48efc857, 0x0201f800, + 0x00103b28, 0x42034000, 0x0010b4a4, 0x49a1d80b, + 0x48ef401e, 0x59a0001d, 0x84000544, 0x4803401d, + 0x0201f800, 0x00102214, 0x0201f800, 0x00102233, + 0x5c03e000, 0x1c01f000, 0x4da00000, 0x4df00000, + 0x4203e000, 0x50000000, 0x04006051, 0x40001000, + 0x42034000, 0x0010b4a4, 0x59a01818, 0x800c19c0, + 0x04020008, 0x59a0381b, 0x801c39c0, 0x02000800, + 0x001005d8, 0x59a0041c, 0x801c3c00, 0x0401f00c, + 0x59a00419, 0x82000400, 0x00000002, 0x48034419, + 0x82000c80, 0x00000013, 0x04001003, 0x497b4419, + 0x41780000, 0x59a03816, 0x801c3c00, 0x80081040, + 0x480b4017, 0x581c0200, 0x4803c021, 0x581c0401, + 0x4803c022, 0x581c0201, 0x4803c023, 0x581c0400, + 0x4803c020, 0x900001c0, 0x82000540, 0x00000012, + 0x4803c011, 0x59e00017, 0x8c000508, 0x04000003, + 0x4a03c017, 0x00000002, 0x4203e000, 0x30000001, + 0x800c19c0, 0x04000007, 0x800c1840, 0x480f4018, + 0x0402001f, 0x497b4419, 0x497b4219, 0x0401f01c, + 0x800811c0, 0x0402000b, 0x4d2c0000, 0x59a2581b, + 0x0201f800, 0x001007f4, 0x5c025800, 0x497b401b, + 0x497b401a, 0x497b441c, 0x497b421c, 0x0401f010, + 0x59a0041c, 0x82000400, 0x00000002, 0x82000c80, + 0x00000012, 0x4803441c, 0x04001009, 0x4d2c0000, + 0x59a2581b, 0x592c3813, 0x481f401b, 0x497b441c, + 0x0201f800, 0x001007f4, 0x5c025800, 0x5c03e000, + 0x5c034000, 0x1c01f000, 0x59a80005, 0x82000500, + 0x00000003, 0x02020000, 0x00104315, 0x59340400, + 0x82000580, 0x00000606, 0x02020000, 0x001042e6, + 0x5934000d, 0x80027d40, 0x02020000, 0x00104321, + 0x0401f803, 0x80000580, 0x1c01f000, 0x5934000f, + 0x59341203, 0x80080540, 0x0402006f, 0x5934020b, + 0x5934140b, 0x80080480, 0x0402106b, 0x0201f800, + 0x0002075a, 0x04000064, 0x80081000, 0x592c0406, + 0x480a6c0b, 0x49366009, 0x492e6008, 0x4a026406, + 0x00000003, 0x4a026403, 0x00000040, 0x800000c2, + 0x800018c4, 0x800c0400, 0x48026206, 0x592c0808, + 0x592c1809, 0x592c020a, 0x48066017, 0x480e6018, + 0x8c000502, 0x04000030, 0x4a026203, 0x00000004, + 0x592c0207, 0x80000040, 0x04020020, 0x59a80005, + 0x8c000514, 0x42000000, 0x00000055, 0x04020003, + 0x42000000, 0x00000033, 0x80000040, 0x040207ff, + 0x592c0204, 0x82000500, 0x000000ff, 0x82000580, + 0x00000018, 0x04020011, 0x592c180f, 0x59300007, + 0x82000540, 0x00000091, 0x480e6011, 0x48026007, + 0x42000000, 0x80000004, 0x48026004, 0x59bc00ea, + 0x8c000516, 0x040207fe, 0x83300400, 0x20000000, + 0x480378e1, 0x1c01f000, 0x0401fe78, 0x59300007, + 0x8400054e, 0x48026007, 0x592c1a04, 0x820c1d00, + 0x000000ff, 0x820c0580, 0x00000048, 0x04000017, + 0x0401f7ec, 0x8c000500, 0x04020ecb, 0x4a026203, + 0x00000002, 0x59a80805, 0x82040500, 0x00000600, + 0x04020012, 0x42000000, 0x00000030, 0x80000040, + 0x040207ff, 0x592c1a04, 0x820c1d00, 0x000000ff, + 0x820c0580, 0x00000018, 0x040007da, 0x820c0580, + 0x00000048, 0x040207d7, 0x42000800, 0x80000804, + 0x0201f000, 0x00106721, 0x8c040d12, 0x42000000, + 0x00000010, 0x040207ee, 0x42000000, 0x00000051, + 0x0401f7eb, 0x800811c0, 0x04020003, 0x4a026a03, + 0x00000001, 0x59340010, 0x492e6810, 0x80000d40, + 0x04020003, 0x492e680f, 0x1c01f000, 0x492c0800, + 0x1c01f000, 0x83440c80, 0x00000800, 0x04021009, + 0x83440400, 0x0010ac00, 0x50000000, 0x80000540, + 0x04000004, 0x40026800, 0x80000580, 0x1c01f000, + 0x82000540, 0x00000001, 0x1c01f000, 0x59340203, + 0x80000540, 0x0402004b, 0x4d300000, 0x4d2c0000, + 0x5934000f, 0x80025d40, 0x04000044, 0x0201f800, + 0x0002075a, 0x0400003f, 0x592c0000, 0x4802680f, + 0x80000540, 0x04020002, 0x48026810, 0x592c2a04, + 0x80081000, 0x480a6c0b, 0x49366009, 0x492e6008, + 0x82142d00, 0x000000ff, 0x82140580, 0x00000012, + 0x04000035, 0x4a026406, 0x00000003, 0x4a026403, + 0x00000040, 0x592c0406, 0x800000c2, 0x800018c4, + 0x800c0400, 0x48026206, 0x592c0808, 0x592c1809, + 0x592c020a, 0x48066017, 0x480e6018, 0x8c000502, + 0x02000000, 0x0010474d, 0x4a026203, 0x00000004, + 0x592c0207, 0x80000040, 0x02020000, 0x00104740, + 0x82140580, 0x00000018, 0x02020000, 0x00104740, + 0x592c180f, 0x59300007, 0x82000540, 0x00000091, + 0x480e6011, 0x48026007, 0x42000000, 0x80000004, + 0x48026004, 0x59bc00ea, 0x8c000516, 0x040207fe, + 0x83300400, 0x20000000, 0x480378e1, 0x5934020b, + 0x5934140b, 0x80080480, 0x040017be, 0x0401f003, + 0x4a026a03, 0x00000001, 0x5c025800, 0x5c026000, + 0x1c01f000, 0x497a5800, 0x49325809, 0x4a026406, + 0x00000006, 0x4a026203, 0x00000007, 0x0401f802, + 0x0401f7ef, 0x59a80021, 0x800001c0, 0x02020000, + 0x0010476f, 0x59a80005, 0x8c000504, 0x02020000, + 0x0010476b, 0x59340200, 0x8c000518, 0x02020000, + 0x00104767, 0x592c0a0c, 0x48066202, 0x4a025a06, + 0x00000000, 0x8c000508, 0x02020000, 0x00104763, + 0x4d3c0000, 0x417a7800, 0x0401fbdf, 0x5c027800, + 0x1c01f000, 0x592c0404, 0x8c00051e, 0x02020000, + 0x00104ce4, 0x59980022, 0x80000540, 0x04000017, + 0x592c0a06, 0x592c0409, 0x80040540, 0x04020013, + 0x0201f000, 0x00104cfa, 0x592c0404, 0x8c00051e, + 0x02020000, 0x00104cf3, 0x59980022, 0x80000540, + 0x0400000a, 0x82040580, 0x00000001, 0x04020007, + 0x0201f000, 0x00104cfa, 0x592c0404, 0x8c00051e, + 0x02020000, 0x00104dca, 0x59980026, 0x497a5800, + 0x80000540, 0x02020000, 0x00104e1d, 0x59d80105, + 0x82000d00, 0x00018780, 0x02020000, 0x00104edb, + 0x80000106, 0x82000500, 0x00000003, 0x0c01f001, + 0x000202f0, 0x00104e1d, 0x000202f6, 0x00020341, + 0x592c0001, 0x492fb107, 0x80000d40, 0x02020000, + 0x00104ddb, 0x1c01f000, 0x592c0001, 0x492fb107, + 0x80000d40, 0x02020000, 0x00104de8, 0x59da5908, + 0x835c0480, 0x00000020, 0x0400102c, 0x0402b034, + 0x492fb007, 0x0400e7fa, 0x59d80105, 0x82000500, + 0x00018780, 0x02020000, 0x00104edb, 0x0400601f, + 0x59d8010a, 0x59d8090a, 0x80040580, 0x040207fd, + 0x800408e0, 0x599c1017, 0x8c081508, 0x04020028, + 0x82040d40, 0x00000013, 0x5998002b, 0x4807c011, + 0x84000500, 0x4803302b, 0x59e00017, 0x8c000508, + 0x04020004, 0x4203e000, 0x30000001, 0x1c01f000, + 0x4a03c017, 0x00000003, 0x82040500, 0x000000ff, + 0x82000580, 0x0000001d, 0x040207f7, 0x4a03c017, + 0x0000000d, 0x0401f7f4, 0x5998082b, 0x84040d40, + 0x4807302b, 0x1c01f000, 0x496a5800, 0x412ed000, + 0x815eb800, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x0400e7ca, 0x0401f7d0, 0x0402f7f7, + 0x492fa807, 0x0400e7c6, 0x0401f7cc, 0x59e0000f, + 0x59e0100f, 0x80081580, 0x040207fd, 0x81281580, + 0x040007d4, 0x40025000, 0x82040d40, 0x0000001d, + 0x0401f7d2, 0x59d80908, 0x45680800, 0x4006d000, + 0x815eb800, 0x0400e7fc, 0x59c80000, 0x82000540, + 0x00001200, 0x48039000, 0x02006000, 0x00104df8, + 0x59d8010a, 0x59d8090a, 0x80040d80, 0x040207fd, + 0x900001c0, 0x82000540, 0x00000013, 0x4803c011, + 0x5998002b, 0x84000500, 0x4803302b, 0x59e00017, + 0x8c000508, 0x04000003, 0x4a03c017, 0x00000003, + 0x4203e000, 0x30000001, 0x59d80105, 0x82000500, + 0x00018780, 0x02020000, 0x00104edb, 0x0202d000, + 0x00104dfd, 0x592c0001, 0x492fb107, 0x80000d40, + 0x02020000, 0x00104e10, 0x1c01f000, 0x59980020, + 0x0c01f001, 0x00020370, 0x00020371, 0x00104e88, + 0x1c01f000, 0x4df00000, 0x4203e000, 0x50000000, + 0x0402681e, 0x04006004, 0x599c0017, 0x8c000508, + 0x04020865, 0x59980029, 0x80025d40, 0x0400000a, + 0x0402d00b, 0x59980026, 0x80000040, 0x48033026, + 0x592c0000, 0x492fb107, 0x48033029, 0x04020002, + 0x48033028, 0x5c03e000, 0x1c01f000, 0x59d80105, + 0x82000500, 0x00018780, 0x02020000, 0x00104edb, + 0x42000000, 0x0010b855, 0x0201f800, 0x0010aa47, + 0x5c03e000, 0x1c01f000, 0x5998002b, 0x8c000500, + 0x0402003b, 0x0400e007, 0x59d80105, 0x82000500, + 0x00018780, 0x02020000, 0x00104edb, 0x1c01f000, + 0x59da5908, 0x835c0c80, 0x00000020, 0x04001003, + 0x0400b029, 0x0400f02b, 0x496a5800, 0x412ed000, + 0x815eb800, 0x59c80000, 0x82000540, 0x00001200, + 0x48039000, 0x0400e7f3, 0x59d8010a, 0x59d8090a, + 0x80040580, 0x040207fd, 0x800408e0, 0x599c1017, + 0x8c081508, 0x04020022, 0x82040d40, 0x00000013, + 0x4807c011, 0x59e00017, 0x8c000508, 0x0400000a, + 0x4a03c017, 0x00000003, 0x82040500, 0x000000ff, + 0x82000580, 0x0000001d, 0x04020003, 0x4a03c017, + 0x0000000d, 0x4203e000, 0x30000001, 0x59d80105, + 0x82000500, 0x00018780, 0x02020000, 0x00104edb, + 0x1c01f000, 0x492fb007, 0x0400e7d2, 0x0401f7df, + 0x492fa807, 0x0400e7cf, 0x0401f7dc, 0x84000500, + 0x4803302b, 0x0400e7cb, 0x0401f7d8, 0x59e0000f, + 0x59e0100f, 0x80081580, 0x040207fd, 0x81281580, + 0x040007da, 0x40025000, 0x82040d40, 0x0000001d, + 0x0401f7d8, 0x59e0000f, 0x59e0100f, 0x80080d80, + 0x040207fd, 0x81280580, 0x04020002, 0x1c01f000, + 0x400a5000, 0x900811c0, 0x82081540, 0x0000001c, + 0x480bc011, 0x59e00017, 0x8c000508, 0x04000003, + 0x4a03c017, 0x0000000c, 0x4203e000, 0x30000001, + 0x1c01f000, 0x41700000, 0x0c01f001, 0x00105420, + 0x000203fc, 0x00105420, 0x00105421, 0x0010541e, + 0x0010541e, 0x0010541e, 0x0010541e, 0x001058b0, + 0x04010037, 0x59980006, 0x80000540, 0x0402003c, + 0x0402c01c, 0x4202f800, 0x00000010, 0x4df00000, + 0x4203e000, 0x50000000, 0x49db3005, 0x59da5808, + 0x592c0204, 0x497a5800, 0x497a5801, 0x82000500, + 0x000000ff, 0x82000c80, 0x00000079, 0x04021036, + 0x0c01f839, 0x5c03e000, 0x817ef840, 0x04000009, + 0x836c0580, 0x00000003, 0x04020006, 0x83700580, + 0x00000001, 0x04020010, 0x0401001b, 0x0400c7e8, + 0x0400f94a, 0x0400b134, 0x59d40005, 0x82000500, + 0x43018780, 0x02020000, 0x0010583f, 0x59d80005, + 0x82000500, 0x43018780, 0x02020000, 0x00105846, + 0x1c01f000, 0x83700580, 0x00000003, 0x02000800, + 0x00105421, 0x83700580, 0x00000001, 0x040207ed, + 0x04010005, 0x0400c7d2, 0x0401f7ea, 0x4202f800, + 0x00000010, 0x4df00000, 0x4203e000, 0x50000000, + 0x49d73005, 0x59d65808, 0x0401f7ce, 0x4df00000, + 0x4203e000, 0x50000000, 0x40025800, 0x592c0204, + 0x497b3005, 0x497b3006, 0x4202f800, 0x00000010, + 0x0401f7c7, 0x0201f800, 0x00105491, 0x5c03e000, + 0x0401f7d4, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105527, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x001054a1, + 0x00105491, 0x00105491, 0x00105491, 0x00105551, + 0x00105491, 0x00105491, 0x00105491, 0x000204ef, + 0x00105491, 0x001056b4, 0x00105491, 0x00105491, + 0x00105491, 0x000204c2, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x001054c9, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x001057d3, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x0010581e, 0x00105491, + 0x001054bb, 0x00105491, 0x00105797, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105765, 0x00105491, + 0x00105765, 0x00105872, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105725, + 0x00105855, 0x00105491, 0x00105865, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x00105491, 0x00105491, + 0x00105491, 0x00105491, 0x592c0204, 0x80000110, + 0x02000000, 0x00105499, 0x80000040, 0x04000009, + 0x48033002, 0x492f3003, 0x492f3004, 0x4a033008, + 0x000204d0, 0x4202e000, 0x00000003, 0x1c01f000, + 0x592c0406, 0x82000c80, 0x0000199a, 0x02021000, + 0x001054a9, 0x59a80021, 0x80000540, 0x02020000, + 0x001054d7, 0x592e8a06, 0x83440c80, 0x000007f0, + 0x02021000, 0x001054a9, 0x83440400, 0x0010ac00, + 0x50000000, 0x80026d40, 0x02000000, 0x001054db, + 0x59340002, 0x592c0810, 0x80040580, 0x82000500, + 0x00ffffff, 0x02020000, 0x001054a9, 0x0401fccf, + 0x02020000, 0x001054de, 0x1c01f000, 0x592c0204, + 0x80000110, 0x02000000, 0x00105499, 0x80000040, + 0x0402000b, 0x592c040a, 0x8c000504, 0x04000010, + 0x592c0207, 0x82000c80, 0x00001001, 0x02021000, + 0x001054a9, 0x0201f000, 0x0010588a, 0x48033002, + 0x492f3003, 0x492f3004, 0x4a033008, 0x00020507, + 0x4202e000, 0x00000003, 0x1c01f000, 0x592c0406, + 0x82000c80, 0x0000199a, 0x02021000, 0x001054a9, + 0x592e8a06, 0x417a7800, 0x0401fd37, 0x02020000, + 0x00105658, 0x59340002, 0x592c0808, 0x80040580, + 0x82000500, 0x00ffffff, 0x02020000, 0x001054a9, + 0x497a5808, 0x592e6009, 0x83300580, 0xffffffff, + 0x02000000, 0x00105618, 0x83300480, 0x0010d1c0, + 0x02001000, 0x00105675, 0x59a8000b, 0x81300480, + 0x02021000, 0x00105675, 0x592c240a, 0x49366009, + 0x8c10251c, 0x02020000, 0x00105606, 0x59a80068, + 0x8c000510, 0x02020000, 0x0010568e, 0x59a80821, + 0x800409c0, 0x02020000, 0x001055ec, 0x59a80805, + 0x8c040d04, 0x02020000, 0x0010567f, 0x59340200, + 0x8c000518, 0x02020000, 0x00105670, 0x59300c06, + 0x82040580, 0x00000006, 0x02020000, 0x00105610, + 0x59300414, 0x8c000516, 0x02020000, 0x0010567a, + 0x8c102508, 0x02020000, 0x0010a5b8, 0x59300808, + 0x4a025a06, 0x00000000, 0x800409c0, 0x02020000, + 0x001055e7, 0x592c0a0c, 0x48066202, 0x492e6008, + 0x0401f14d, 0x4df00000, 0x4203e000, 0x50000000, + 0x0402b00b, 0x835c0480, 0x00000020, 0x0400100d, + 0x815eb840, 0x416a5800, 0x592ed000, 0x492fb007, + 0x497a5800, 0x497a5801, 0x0400b7f7, 0x59d80005, + 0x82000500, 0x43018780, 0x02020000, 0x00105846, + 0x5c03e000, 0x1c01f000, 0x4df00000, 0x4203e000, + 0x50000000, 0x0402f00b, 0x835c0480, 0x00000020, + 0x0400100d, 0x815eb840, 0x416a5800, 0x592ed000, + 0x492fa807, 0x497a5800, 0x497a5801, 0x0400f7f7, + 0x59d40005, 0x82000500, 0x43018780, 0x02020000, + 0x0010583f, 0x5c03e000, 0x1c01f000, 0x4df00000, + 0x4203e000, 0x50000000, 0x59940024, 0x80000540, + 0x04000112, 0x4c000000, 0x42000000, 0x00001000, + 0x50000000, 0x82000480, 0x24320001, 0x04020015, + 0x42000800, 0x00000064, 0x80040840, 0x04000007, + 0x4a030000, 0x00000001, 0x40000000, 0x59800000, + 0x8c000500, 0x040007f9, 0x04000008, 0x42000800, + 0x00007a01, 0x50040000, 0x8c000510, 0x04000003, + 0x84000510, 0x44000800, 0x4a030000, 0x00000000, + 0x59e00002, 0x8c00051e, 0x0402001b, 0x42000000, + 0x00001000, 0x50000000, 0x82000480, 0x24320002, + 0x04020015, 0x42000800, 0x00000064, 0x80040840, + 0x04000007, 0x4a030000, 0x00000001, 0x40000000, + 0x59800000, 0x8c000500, 0x040007f9, 0x04000008, + 0x42000800, 0x00007a17, 0x50040000, 0x8c00050e, + 0x04020003, 0x8400054e, 0x44000800, 0x4a030000, + 0x00000000, 0x5c000000, 0x5994781a, 0x48032825, + 0x803c0480, 0x04001004, 0x04000003, 0x4803281a, + 0x0401f022, 0x41787800, 0x803c7800, 0x82000400, + 0x000003e8, 0x040027fd, 0x4803281a, 0x59a80024, + 0x803c1400, 0x480b5024, 0x803c0040, 0x04000002, + 0x483fc857, 0x59e40852, 0x59a80025, 0x80040580, + 0x04000004, 0x480bc857, 0x59e40052, 0x48035025, + 0x59940026, 0x803c0400, 0x48032826, 0x0201f800, + 0x00106021, 0x59940000, 0x82000580, 0x00000000, + 0x04020006, 0x59940026, 0x48032827, 0x497b2826, + 0x4a032800, 0x00000001, 0x4c0c0000, 0x59940007, + 0x80000d40, 0x0400001d, 0x59941006, 0x59940025, + 0x80081c80, 0x04001004, 0x04000003, 0x480f2806, + 0x0401f016, 0x80040840, 0x48072807, 0x82040580, + 0x000003e8, 0x04020007, 0x4c040000, 0x4c0c0000, + 0x59940008, 0x0801f800, 0x5c001800, 0x5c000800, + 0x800409c0, 0x04020004, 0x59940008, 0x0801f800, + 0x0401f006, 0x400c0000, 0x820c1c00, 0x0000000a, + 0x040027ed, 0x480f2806, 0x5c001800, 0x4d180000, + 0x59c40008, 0x8c000534, 0x04020025, 0x417a3000, + 0x83947c00, 0x00000009, 0x583c0001, 0x80000d40, + 0x04020008, 0x823c7c00, 0x00000003, 0x811a3000, + 0x83180580, 0x00000005, 0x040207f8, 0x0401f018, + 0x583c1000, 0x59940025, 0x80080480, 0x04001005, + 0x04000004, 0x48007800, 0x80000040, 0x04021010, + 0x80040840, 0x48047801, 0x04000008, 0x82000400, + 0x0000000a, 0x48007800, 0x040027fa, 0x82040500, + 0x0000007f, 0x0401f7e8, 0x583c0002, 0x4c3c0000, + 0x0801f800, 0x5c007800, 0x0401f7e3, 0x5c023000, + 0x59940019, 0x80001540, 0x04000008, 0x04002007, + 0x59940025, 0x80080480, 0x497b2819, 0x04001003, + 0x04000002, 0x48032819, 0x59940004, 0x80000d40, + 0x0400002a, 0x4c040000, 0x5994001c, 0x80000d40, + 0x04000013, 0x5994101b, 0x59940025, 0x80080480, + 0x04001005, 0x04000004, 0x4803281b, 0x80000040, + 0x0402100b, 0x80040840, 0x4807281c, 0x04020004, + 0x5994001d, 0x0801f800, 0x0401f005, 0x82000400, + 0x0000000a, 0x4803281b, 0x040027f7, 0x5c000800, + 0x59941003, 0x59940025, 0x80080480, 0x04001005, + 0x04000004, 0x48032803, 0x80000040, 0x0402100b, + 0x80040840, 0x48072804, 0x04020004, 0x59940005, + 0x0801f800, 0x0401f005, 0x82000400, 0x0000000a, + 0x48032803, 0x040027f7, 0x5994001f, 0x80000d40, + 0x04000013, 0x5994101e, 0x59940025, 0x80080480, + 0x04001005, 0x04000004, 0x4803281e, 0x80000040, + 0x0402100b, 0x80040840, 0x4807281f, 0x04020004, + 0x59940020, 0x0801f800, 0x0401f005, 0x82000400, + 0x00000001, 0x4803281e, 0x040027f7, 0x59940022, + 0x80000d40, 0x04000013, 0x59941021, 0x59940025, + 0x80080480, 0x04001005, 0x04000004, 0x48032821, + 0x80000040, 0x0402100b, 0x80040840, 0x48072822, + 0x04020004, 0x59940023, 0x0801f800, 0x0401f005, + 0x82000400, 0x0000000a, 0x48032821, 0x040027f7, + 0x59940824, 0x59940025, 0x80040480, 0x02001800, + 0x001005d8, 0x48032824, 0x59940000, 0x0c01f001, + 0x00105fb5, 0x00105fb7, 0x00105fdd, 0x59940024, + 0x80000000, 0x48032824, 0x4203e000, 0x70000000, + 0x1c01f000, 0x592c0406, 0x800000c2, 0x800008c4, + 0x80040c00, 0x592c040a, 0x48066206, 0x82000d00, + 0x00000003, 0x02000000, 0x0010615e, 0x8c000500, + 0x04020029, 0x8c00051e, 0x02000000, 0x00106139, + 0x82000d00, 0x000000c0, 0x02020000, 0x0010612f, + 0x82000d00, 0x00002020, 0x02020000, 0x0010612c, + 0x813e79c0, 0x02020000, 0x0010612c, 0x592c0c0c, + 0x800409c0, 0x02020000, 0x0010612c, 0x59300a03, + 0x82040d80, 0x00000007, 0x02020000, 0x0010612c, + 0x4a026203, 0x00000003, 0x4a026403, 0x00000043, + 0x0201f800, 0x000200c9, 0x82080d40, 0x80003465, + 0x48066004, 0x497a6000, 0x59bc00ea, 0x8c000516, + 0x040207fe, 0x83300400, 0xa0000000, 0x480378e1, + 0x1c01f000, 0x8c000502, 0x02020000, 0x00106181, + 0x8c00051e, 0x0400000e, 0x82000d00, 0x000000c0, + 0x04000005, 0x82040d80, 0x000000c0, 0x02020000, + 0x00106186, 0x82000d00, 0x00002020, 0x82040d80, + 0x00002020, 0x02000000, 0x0010614d, 0x592c0207, + 0x80000040, 0x02020000, 0x00106157, 0x592c180d, + 0x800c19c0, 0x02020000, 0x00106157, 0x592c180f, + 0x59300007, 0x82000540, 0x00000011, 0x480e6011, + 0x48026007, 0x4a026203, 0x00000004, 0x4a026403, + 0x00000042, 0x42000800, 0x80002001, 0x0401f02a, + 0x5c000000, 0x4c000000, 0x4803c857, 0x4807c857, + 0x0401f003, 0x42000800, 0x00000001, 0x59325808, + 0x832c0500, 0x00ff0000, 0x0400000d, 0x592c0000, + 0x48065a06, 0x48026008, 0x592c040a, 0x8c000510, + 0x04020008, 0x0201f800, 0x000202ce, 0x417a7800, + 0x59300008, 0x80025d40, 0x0402078f, 0x1c01f000, + 0x456a5800, 0x412ed000, 0x815eb800, 0x59c80000, + 0x82000540, 0x00001200, 0x48039000, 0x0401f7f4, + 0x59840000, 0x80000540, 0x04020002, 0x1c01f000, + 0x59840003, 0x80000540, 0x02020000, 0x001061fe, + 0x1c01f000, 0x48066004, 0x59bc00ea, 0x8c000516, + 0x040207fe, 0x83300400, 0x40000000, 0x480378e1, + 0x1c01f000, 0x59bc00ea, 0x82001500, 0xb0000018, + 0x02020000, 0x00106c81, 0x8c000510, 0x0400002a, + 0x59bc10e0, 0x82080500, 0xfffff000, 0x0402000a, + 0x80080108, 0x820a3500, 0x0000000f, 0x4803c857, + 0x1201f000, 0x00106c87, 0x84000510, 0x48026004, + 0x0401f016, 0x840a653e, 0x59300004, 0x8c000520, + 0x040007fa, 0x82000500, 0xfffefeff, 0x48026004, + 0x8c08153e, 0x04020005, 0x42027000, 0x00000013, + 0x0401f859, 0x0401f009, 0x59300004, 0x8c000514, + 0x04000003, 0x0401ffb0, 0x0401f02f, 0x42027000, + 0x00000049, 0x0401f850, 0x59bc00ea, 0x82001500, + 0xb0000018, 0x02020000, 0x00106c81, 0x8c000510, + 0x040207d8, 0x1c01f000, 0x83640480, 0x00000010, + 0x0400101a, 0x41626000, 0x41580000, 0x59300a03, + 0x82040d80, 0x00000000, 0x04000008, 0x83326400, + 0x00000024, 0x81300c80, 0x040017f9, 0x42026000, + 0x0010d1c0, 0x0401f7f6, 0x8166c840, 0x83300c00, + 0x00000024, 0x80040480, 0x04021005, 0x4006c000, + 0x4a026203, 0x00000008, 0x1c01f000, 0x837ac540, + 0x0010d1c0, 0x0401f7fb, 0x42000000, 0x0010b854, + 0x0201f800, 0x0010aa47, 0x4967c857, 0x80026580, + 0x1c01f000, 0x83300480, 0x0010d1c0, 0x02001800, + 0x001005d8, 0x41580000, 0x81300480, 0x0402100c, + 0x04011000, 0x457a6000, 0x4a026202, 0x0000ffff, + 0x83300400, 0x00000003, 0x4803c840, 0x4a03c842, + 0x00000021, 0x8166c800, 0x1c01f000, 0x41540000, + 0x81300480, 0x02021800, 0x001005d8, 0x04011000, + 0x457a6000, 0x4a026202, 0x0000ffff, 0x83300400, + 0x00000003, 0x4803c840, 0x4a03c842, 0x00000021, + 0x59a80066, 0x49335065, 0x80000000, 0x48035066, + 0x1c01f000, 0x4d340000, 0x59326809, 0x59300406, + 0x82000500, 0x0000001f, 0x0c01f803, 0x5c026800, + 0x1c01f000, 0x00107966, 0x00107979, 0x00107993, + 0x000207c9, 0x001098f1, 0x0010990c, 0x0002083e, + 0x00107966, 0x00107979, 0x001064ee, 0x001079ac, + 0x00107966, 0x00107966, 0x00107966, 0x00107966, + 0x00107966, 0x001095a1, 0x0010a6c2, 0x00107966, + 0x00107966, 0x00107966, 0x00107966, 0x00107966, + 0x00107966, 0x00107966, 0x00107966, 0x00107966, + 0x00107966, 0x00107966, 0x00107966, 0x00107966, + 0x00107966, 0x59300203, 0x82000c80, 0x0000000e, + 0x02021800, 0x001005d8, 0x0c01f001, 0x001079aa, + 0x00108592, 0x000207dd, 0x00108720, 0x001087b9, + 0x001079aa, 0x001079aa, 0x001079aa, 0x00108577, + 0x001079aa, 0x001079aa, 0x001079aa, 0x001079aa, + 0x00108985, 0x83380480, 0x00000058, 0x04021007, + 0x83380480, 0x00000040, 0x04001004, 0x4d2c0000, + 0x0c01f803, 0x5c025800, 0x1c01f000, 0x0010861b, + 0x0010861b, 0x0010861b, 0x0010861b, 0x0010861b, + 0x0010861d, 0x001086bd, 0x0010861b, 0x0010861b, + 0x0010861b, 0x0010861b, 0x0010861b, 0x0010861b, + 0x0010861b, 0x0010861b, 0x0010861b, 0x0010861b, + 0x0010861b, 0x0010861b, 0x001086c1, 0x000207ff, + 0x0010861b, 0x001086c0, 0x001086c2, 0x59325808, + 0x59300811, 0x59301402, 0x59340200, 0x8c00050e, + 0x0402001c, 0x0401f826, 0x04000005, 0x4a025a04, + 0x00000103, 0x497a5c09, 0x0401f009, 0x4a025a04, + 0x00000103, 0x4a025a06, 0x00000000, 0x497a5c09, + 0x800409c0, 0x02020800, 0x00108785, 0x48065807, + 0x480a5c06, 0x0201f800, 0x000202c1, 0x5934000f, + 0x5934140b, 0x80081040, 0x04001002, 0x480a6c0b, + 0x80000540, 0x02020800, 0x00020253, 0x0401f75e, + 0x592c020a, 0x8c000502, 0x040007e9, 0x800409c0, + 0x040007e7, 0x592c0208, 0x8c00050e, 0x040207e4, + 0x4933c857, 0x0201f000, 0x0010920f, 0x592c020a, + 0x8c000500, 0x04000010, 0x59300015, 0x592c380f, + 0x801c3c80, 0x0400000c, 0x4a025a06, 0x00000015, + 0x8c1c3d3e, 0x04000005, 0x4a025a06, 0x00000007, + 0x801c3880, 0x801c3800, 0x481fc857, 0x821c0d40, + 0x00000000, 0x1c01f000, 0x59300203, 0x82003480, + 0x0000000e, 0x02021800, 0x001005d8, 0x0c01f001, + 0x0010992b, 0x00020852, 0x00109fba, 0x00109fc8, + 0x0002086e, 0x0010992b, 0x0010a0a8, 0x0002088d, + 0x0010992b, 0x0010992b, 0x0010992b, 0x0010992b, + 0x0010992b, 0x0010992b, 0x83380580, 0x00000013, + 0x02020000, 0x00109f42, 0x59300403, 0x82027480, + 0x00000044, 0x02021800, 0x001005d8, 0x82000480, + 0x00000040, 0x02001800, 0x001005d8, 0x0c01f001, + 0x00109f9e, 0x00020864, 0x00109fa0, 0x00109fb2, + 0x59325808, 0x832c0500, 0x00ff0000, 0x04000005, + 0x592c0c0a, 0x8c040d1a, 0x02020000, 0x00109fad, + 0x0401fe91, 0x0401f710, 0x83380580, 0x00000048, + 0x04000007, 0x83380580, 0x00000053, 0x02000000, + 0x0010a04a, 0x0201f800, 0x001005d8, 0x5930001f, + 0x59301011, 0x59300809, 0x58040a00, 0x8c040d0e, + 0x02020000, 0x0010a026, 0x800811c0, 0x02020000, + 0x0010a033, 0x5930001f, 0x80000540, 0x02020000, + 0x0010a041, 0x59325808, 0x592c040a, 0x8c00051e, + 0x02000000, 0x0010a01c, 0x42027000, 0x00000041, + 0x0401f001, 0x83380480, 0x00000054, 0x02021800, + 0x001005d8, 0x83380480, 0x00000040, 0x02001000, + 0x0010a067, 0x0c01f001, 0x0010a073, 0x000208aa, + 0x0010a07f, 0x0010a086, 0x0010a073, 0x0010a073, + 0x0010a073, 0x0010a073, 0x0010a075, 0x0010a07a, + 0x0010a07a, 0x0010a073, 0x0010a073, 0x0010a073, + 0x0010a073, 0x0010a07a, 0x0010a073, 0x0010a07a, + 0x0010a073, 0x0010a075, 0x4a026203, 0x00000001, + 0x493a6403, 0x42000800, 0x80002042, 0x0401f672, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x14aa62b1, + 0x00000000, 0x00000000, 0x00000000, 0x00000005, + 0xfffffffb, 0x02800004, 0x00000000, 0x0000c000, + 0x0000071d, 0x073fca5a, 0x0705a5a5, 0x01928009, + 0x070ff0e1, 0x03800006, 0x04958010, 0x05308000, + 0x05008000, 0x0600902f, 0x04a004dc, 0x0202f051, + 0x042e4020, 0x018f021b, 0x033e5000, 0x03020000, + 0x078d0018, 0x0493041a, 0x0092041c, 0x038a0305, + 0x078b0303, 0x048e8010, 0x0678aae5, 0x06000001, + 0x07818174, 0x040010e6, 0x0448e0e6, 0x04818010, + 0x002fb008, 0x0448e0e6, 0x04818010, 0x060ff0e6, + 0x00580401, 0x054880ff, 0x04818010, 0x022a5001, + 0x030430d4, 0x06780043, 0x030e0000, 0x030450ff, + 0x06780043, 0x03019000, 0x058185c6, 0x027c0045, + 0x03020000, 0x06810037, 0x027c0045, 0x03040000, + 0x068100c7, 0x027c0045, 0x03080000, 0x0781061e, + 0x04908037, 0x029105c4, 0x010410a6, 0x0379ff41, + 0x037fffff, 0x072d6000, 0x07601241, 0x050f80ff, + 0x032fa009, 0x05600400, 0x050f80ff, 0x056c04ff, + 0x068105dc, 0x073fa009, 0x06000001, 0x0279ff02, + 0x0700ffff, 0x070ff0d1, 0x0179feff, 0x0700ffff, + 0x045c0402, 0x048185dc, 0x060ff0d0, 0x0179feff, + 0x0700ffff, 0x057dfeff, 0x0700ffff, 0x078105be, + 0x05600e41, 0x050f80ff, 0x032fa069, 0x07480000, + 0x068105d0, 0x06780043, 0x070000f0, 0x0781005f, + 0x037c00ff, 0x06000010, 0x0781005f, 0x038005cc, + 0x0379ff00, 0x070fffff, 0x06780043, 0x07f00000, + 0x075a0000, 0x020ef001, 0x028605ce, 0x05484000, + 0x02a1819e, 0x062d6001, 0x002fb001, 0x070ff069, + 0x01868072, 0x060ff079, 0x055c0441, 0x06810010, + 0x012fb000, 0x060560fb, 0x03800078, 0x060ff079, + 0x02868198, 0x070ff069, 0x055c0441, 0x06810010, + 0x060560fb, 0x0400d0d0, 0x062d6002, 0x0648300d, + 0x06810086, 0x070ff0d1, 0x062d6001, 0x045c040b, + 0x06810089, 0x05488000, 0x04818086, 0x072e500c, + 0x00208001, 0x05a004e1, 0x02800010, 0x062d6001, + 0x07f00000, 0x07f00000, 0x070ff0d1, 0x0179feff, + 0x070000ff, 0x055c040c, 0x058180bb, 0x0007b001, + 0x03079041, 0x0307a000, 0x06600a79, 0x050f80ff, + 0x053fa80a, 0x06000010, 0x072d5003, 0x078d0096, + 0x0307c003, 0x0007d004, 0x0107e005, 0x0307f006, + 0x02080007, 0x00081008, 0x01082009, 0x0308300a, + 0x0008400b, 0x0308500c, 0x068d00a1, 0x0678007a, + 0x07f00000, 0x010880ff, 0x03386000, 0x03010000, + 0x072e6300, 0x020ef07f, 0x02860010, 0x070ff07d, + 0x0450047c, 0x050f80ff, 0x002fa819, 0x068d00ae, + 0x02080001, 0x00081002, 0x0448807a, 0x068100b5, + 0x0379ff03, 0x070000ff, 0x01082003, 0x068d00b6, + 0x02386004, 0x03010000, 0x072e6c00, 0x02800010, + 0x06780043, 0x070000f0, 0x078105d7, 0x050020ff, + 0x027c0002, 0x06000010, 0x078100c3, 0x038005d7, + 0x0700c0d1, 0x0379ff0c, 0x070000ff, 0x0380008e, + 0x0204a051, 0x06780043, 0x070000f0, 0x037c00ff, + 0x06000010, 0x0781816a, 0x072d6000, 0x019485c0, + 0x050fb056, 0x044880e6, 0x04818010, 0x060ff0d0, + 0x0179feff, 0x0700ffff, 0x057dfeff, 0x0700ffff, + 0x078105be, 0x05a00212, 0x0349c0e4, 0x0781811d, + 0x070ff093, 0x050010ff, 0x070ff093, 0x045c0401, + 0x058180db, 0x02046092, 0x04002046, 0x04600202, + 0x00540401, 0x048280e6, 0x04500425, 0x070060ff, + 0x0730ffff, 0x0700000f, 0x0742000f, 0x05810190, + 0x07a005a6, 0x0648a002, 0x048180e9, 0x00047089, + 0x070ff047, 0x045c0443, 0x077800ff, 0x07f00000, + 0x0781818e, 0x07780047, 0x0500e000, 0x048185ad, + 0x070ff006, 0x01860117, 0x0179fe47, 0x0700000f, + 0x010480ff, 0x056c7048, 0x06818102, 0x007a0d4a, + 0x04003801, 0x0220f001, 0x0180010f, 0x07608e48, + 0x034a60ff, 0x0700f0ff, 0x074b88ff, 0x037000ff, + 0x07000600, 0x05500448, 0x074d00ff, 0x045a044a, + 0x0304a0ff, 0x070ff00f, 0x01540406, 0x05820117, + 0x04950120, 0x05a001bd, 0x02868123, 0x0134bfff, + 0x070fffff, 0x0104102e, 0x050fd041, 0x00800126, + 0x0595011d, 0x05a001bd, 0x0186011d, 0x0202f00e, + 0x052e4030, 0x040fd02f, 0x070fc0ff, 0x05a00218, + 0x02800010, 0x0400e02f, 0x042e4020, 0x0202f051, + 0x0004100e, 0x0004b00e, 0x050fd041, 0x024a6c46, + 0x04500423, 0x050070ff, 0x03620024, 0x050080ff, + 0x04004046, 0x0700500f, 0x03206000, 0x05601048, + 0x0700a0ff, 0x0700900a, 0x070ff005, 0x04500446, + 0x00540425, 0x04820157, 0x05601622, 0x050f80ff, + 0x063fa032, 0x06000002, 0x03203000, 0x01204000, + 0x03205000, 0x0120b000, 0x0320c000, 0x07601441, + 0x050f80ff, 0x043fa852, 0x06000001, 0x070ff056, + 0x056c02ff, 0x050fb0ff, 0x070560ff, 0x03079041, + 0x05600e41, 0x050f80ff, 0x073fa011, 0x0600003d, + 0x06780043, 0x07f00000, 0x065a007a, 0x010880ff, + 0x04a001b6, 0x058d0150, 0x0208a04a, 0x0108b04b, + 0x02386001, 0x03010000, 0x072e6300, 0x028000a8, + 0x0500d00a, 0x05500405, 0x014a68ff, 0x070090ff, + 0x0154040a, 0x0700c0ff, 0x0600a023, 0x0500b024, + 0x02206001, 0x05601622, 0x050f80ff, 0x063fa04a, + 0x06000002, 0x05601022, 0x050f80ff, 0x043fa819, + 0x06000001, 0x0600a00d, 0x0180013c, 0x06780043, + 0x070000f0, 0x050010ff, 0x027c0001, 0x07000030, + 0x078105b4, 0x027c0001, 0x06000020, 0x078105b4, + 0x038005cc, 0x054880ff, 0x06810010, 0x070ff056, + 0x050fb0ff, 0x044880e5, 0x0581017d, 0x044880e6, + 0x04818010, 0x00800183, 0x056c02ff, 0x050fb0ff, + 0x070560ff, 0x072e5300, 0x044880e6, 0x04818010, + 0x072d5003, 0x06780043, 0x07f00000, 0x010880ff, + 0x058d0187, 0x03386005, 0x03010000, 0x033e6000, + 0x0700000c, 0x052e5200, 0x02800010, 0x0120918e, + 0x018004e4, 0x01209190, 0x018004e4, 0x00209192, + 0x018004e4, 0x03209000, 0x018004e4, 0x01209196, + 0x018004e4, 0x00209198, 0x018004e4, 0x02493075, + 0x06810510, 0x0120919a, 0x018004e4, 0x06601e01, + 0x050f80ff, 0x063fa029, 0x06000008, 0x02015010, + 0x02016051, 0x00017051, 0x00011051, 0x05601a41, + 0x050f80ff, 0x053fa83a, 0x06000008, 0x05600e41, + 0x050f80ff, 0x01464000, 0x032fa00a, 0x07006011, + 0x05007012, 0x04008013, 0x07009014, 0x0600a015, + 0x0400b016, 0x0700c017, 0x07c00000, 0x072d5003, + 0x06601479, 0x050f80ff, 0x048d01b9, 0x063fa051, + 0x0600003e, 0x07c00000, 0x06005051, 0x0400e02c, + 0x0660060e, 0x050f80ff, 0x032fa009, 0x0379ff00, + 0x070000ff, 0x076c0000, 0x058101dd, 0x0660480e, + 0x0500e0ff, 0x034000ff, 0x01540427, 0x0582020a, + 0x03400005, 0x070ff005, 0x055c0428, 0x0481020e, + 0x01680e05, 0x056c0405, 0x068181bf, 0x040f8029, + 0x053fa809, 0x07000024, 0x06600649, 0x050f80ff, + 0x032fa009, 0x0379ff00, 0x070000ff, 0x076c0000, + 0x068181bf, 0x0400e049, 0x0340002d, 0x050f802b, + 0x053fa80a, 0x06000016, 0x0660480e, 0x0302c0ff, + 0x034000ff, 0x01540427, 0x0582020c, 0x072d6000, + 0x0460040e, 0x050f80ff, 0x0104e0d1, 0x0379ff4e, + 0x0700ffff, 0x062d6002, 0x032fa009, 0x0004d0d0, + 0x074b004d, 0x07780000, 0x07ffff00, 0x055a044d, + 0x070000ff, 0x00201008, 0x04002051, 0x06003051, + 0x05304000, 0x07000060, 0x03205009, 0x07006022, + 0x0460040e, 0x050f80ff, 0x032fa03a, 0x06603c0e, + 0x050f80ff, 0x073fa00a, 0x07000027, 0x050010d1, + 0x0460320e, 0x050f80ff, 0x012fa80a, 0x060ff00e, + 0x055c042e, 0x04810210, 0x07c00000, 0x0400e026, + 0x008001cb, 0x0202c026, 0x008001e6, 0x0500e02e, + 0x008001e6, 0x0400e051, 0x01800209, 0x0349c0e4, + 0x04810215, 0x07c00000, 0x013e4000, 0x070c0000, + 0x07c00000, 0x013e4000, 0x03080000, 0x07c00000, + 0x009702f4, 0x022a5002, 0x0790821d, 0x00910291, + 0x030400a6, 0x0678aae5, 0x06000001, 0x00a1860e, + 0x06600c40, 0x050f80ff, 0x032fa021, 0x074b0000, + 0x076c0600, 0x07818293, 0x05600403, 0x050f80ff, + 0x073fa009, 0x06000002, 0x0279ff04, 0x0700ffff, + 0x010440d7, 0x0179fe44, 0x0700ffff, 0x045c0404, + 0x07818295, 0x0349f044, 0x0681829e, 0x02495001, + 0x06818297, 0x060ff079, 0x045c0440, 0x0781823c, + 0x0644f07a, 0x002fb008, 0x060ff079, 0x045c0440, + 0x07818241, 0x0644f07a, 0x002fb008, 0x0648f001, + 0x07818288, 0x04600e40, 0x050f80ff, 0x06480001, + 0x04810257, 0x0448e001, 0x04810273, 0x02460001, + 0x0644f001, 0x012fa80a, 0x04008040, 0x05a004ee, + 0x0286828c, 0x05a004d8, 0x062da001, 0x013e4000, + 0x06000080, 0x06930013, 0x02920013, 0x02800010, + 0x0644f001, 0x012fa80a, 0x020ef002, 0x00860275, + 0x04600840, 0x050f80ff, 0x053fa809, 0x06000002, + 0x05780105, 0x00800440, 0x017c0105, 0x05000400, + 0x06818275, 0x06601e02, 0x050f80ff, 0x053fa809, + 0x06000002, 0x04602a40, 0x050f80ff, 0x070ff005, + 0x053fa809, 0x06000002, 0x055c0405, 0x06818275, + 0x04008040, 0x0045e008, 0x05a004d8, 0x00800251, + 0x0644f001, 0x012fa80a, 0x050020d8, 0x04600440, + 0x050f80ff, 0x073fa00a, 0x06000001, 0x06480001, + 0x07818281, 0x05308000, 0x03040000, 0x06009040, + 0x04a004dc, 0x00800251, 0x06a0060e, 0x054b0800, + 0x056a0700, 0x06600c40, 0x050f80ff, 0x032fa00a, + 0x00800251, 0x013e4000, 0x06000080, 0x01209288, + 0x018004e4, 0x06009008, 0x05308000, 0x05004000, + 0x04a004dc, 0x00800251, 0x02209002, 0x008002e5, + 0x03209000, 0x008002e5, 0x02209004, 0x008002e5, + 0x04a002fd, 0x062da001, 0x05308000, 0x05002000, + 0x06009040, 0x04a004dc, 0x02800013, 0x013e4000, + 0x06000080, 0x02495001, 0x078182db, 0x04600840, + 0x050f80ff, 0x053fa809, 0x06000001, 0x0721f000, + 0x0349f003, 0x058102aa, 0x0245f01f, 0x06000002, + 0x018602db, 0x07601400, 0x050f80ff, 0x012fa809, + 0x06480001, 0x058102db, 0x06602440, 0x050f80ff, + 0x012fa809, 0x020ef001, 0x038682db, 0x019b02db, + 0x050020d8, 0x062da001, 0x06303002, 0x05000430, + 0x04600440, 0x050f80ff, 0x073fa012, 0x06000001, + 0x028f82bf, 0x050040d8, 0x062da001, 0x07601e00, + 0x050f80ff, 0x073fa009, 0x06000001, 0x060ff004, + 0x00540402, 0x048202d9, 0x06005051, 0x06006051, + 0x06602240, 0x050f80ff, 0x063fa01a, 0x06000002, + 0x06600a40, 0x050f80ff, 0x073fa00a, 0x07000003, + 0x060ff040, 0x045a041f, 0x010eb0ff, 0x06930013, + 0x02920013, 0x02800010, 0x04004002, 0x018002c9, + 0x04a002fd, 0x062da001, 0x05308000, 0x07005000, + 0x06009040, 0x04a004dc, 0x050080d8, 0x05a004e1, + 0x062da001, 0x02800013, 0x050fd009, 0x050fd041, + 0x013e4000, 0x06000080, 0x05308000, 0x03013000, + 0x04a004dc, 0x010440d7, 0x0349f044, 0x048102f2, + 0x062da001, 0x008f02f2, 0x03e00000, 0x062da001, + 0x02800013, 0x0249c0e5, 0x06810013, 0x062da001, + 0x07f00000, 0x07f00000, 0x033e5000, 0x070c0000, + 0x018f02f6, 0x03800011, 0x050020d8, 0x04600440, + 0x050f80ff, 0x073fa00a, 0x06000001, 0x07c00000, + 0x002fb001, 0x03800306, 0x012fb000, 0x03075087, + 0x068d0307, 0x03386000, 0x03020000, 0x04482075, + 0x06810352, 0x0648a0e6, 0x07810347, 0x0642007f, + 0x06810345, 0x0340007e, 0x060ff038, 0x0154047e, + 0x02d00334, 0x0560027d, 0x050f80ff, 0x032fa009, + 0x030ef000, 0x02860504, 0x0107d000, 0x05600800, + 0x050f80ff, 0x032fa009, 0x03681e00, 0x04500420, + 0x050f80ff, 0x073fa009, 0x0700003f, 0x03800311, + 0x070ff07d, 0x0450047c, 0x050f80ff, 0x002fa819, + 0x078d0327, 0x02080001, 0x00081002, 0x0448807a, + 0x0781032e, 0x0379ff03, 0x070000ff, 0x01082003, + 0x068d032f, 0x02386004, 0x03010000, 0x072e6c00, + 0x02800352, 0x0380033a, 0x0380033c, 0x0280033e, + 0x02800340, 0x03800342, 0x03800344, 0x0727c005, + 0x02800323, 0x0627c008, 0x02800323, 0x0627c00b, + 0x02800323, 0x0627c00e, 0x02800323, 0x0727c011, + 0x02800323, 0x03800314, 0x052e6800, 0x02800352, + 0x044880e6, 0x07810533, 0x052e6200, 0x070ff088, + 0x0179feff, 0x070fffff, 0x04818501, 0x060ff083, + 0x0086836d, 0x033e6000, 0x07000003, 0x068d0352, + 0x07286000, 0x07f00000, 0x078d0355, 0x038c0306, + 0x0648c0e6, 0x05818372, 0x0448e0e6, 0x0781036a, + 0x004920e6, 0x07810365, 0x07a0056f, 0x05001088, + 0x00700101, 0x03100000, 0x00088001, 0x033e6000, + 0x07000088, 0x03800560, 0x02386001, 0x07030000, + 0x033e6000, 0x06000008, 0x028003f1, 0x02799075, + 0x0500040f, 0x06810010, 0x06601479, 0x050080ff, + 0x06309052, 0x0600003e, 0x02800376, 0x06602279, + 0x050080ff, 0x05309812, 0x07000041, 0x0648007a, + 0x0781037e, 0x04488075, 0x0581837e, 0x040f8008, + 0x070fa009, 0x0049107a, 0x01a183f3, 0x00798075, + 0x06000507, 0x05818521, 0x0448b075, 0x06810385, + 0x02493075, 0x0681050e, 0x0249c0e6, 0x048183e0, + 0x0648c0e6, 0x0581839a, 0x068d0389, 0x02386001, + 0x07030000, 0x0049107a, 0x07810390, 0x020ef083, + 0x0386039a, 0x06483075, 0x068103ef, 0x0678007a, + 0x07000035, 0x03a184cf, 0x05308000, 0x07060000, + 0x06009079, 0x04a004dc, 0x028003ef, 0x0448807a, + 0x0681039e, 0x06483075, 0x058104f9, 0x0448d07a, + 0x068103a2, 0x06483075, 0x058104f9, 0x068d03a2, + 0x02386001, 0x07030000, 0x0444e07a, 0x0648307a, + 0x048183c7, 0x0448707a, 0x068103ea, 0x0648f07a, + 0x078103b2, 0x05a004cf, 0x04008079, 0x05a004ee, + 0x008683c2, 0x05a004d8, 0x028003ef, 0x0560107b, + 0x050f80ff, 0x032fa009, 0x0349c000, 0x058183c0, + 0x04600e79, 0x050f80ff, 0x073fa00a, 0x0600003d, + 0x06600a79, 0x050f80ff, 0x053fa80a, 0x06000010, + 0x028003ef, 0x0046e07a, 0x028003ea, 0x06009008, + 0x05308000, 0x05004000, 0x04a004dc, 0x028003ef, + 0x0560167b, 0x050f80ff, 0x032fa011, 0x070ff000, + 0x04500401, 0x030460ff, 0x060ff025, 0x00540446, + 0x078203d1, 0x030460ff, 0x04092046, 0x05a00218, + 0x06600679, 0x050f80ff, 0x00201007, 0x012fa80a, + 0x0046047a, 0x034630ff, 0x050020ff, 0x06003051, + 0x04600e79, 0x050f80ff, 0x073fa012, 0x06000001, + 0x028003ef, 0x033e6a00, 0x0202000e, 0x02079051, + 0x07000088, 0x078d03e4, 0x0744c000, 0x01088000, + 0x03386006, 0x03010000, 0x02800010, 0x05a004cf, + 0x05308000, 0x03020000, 0x06009079, 0x04a004dc, + 0x033e6a00, 0x0302000a, 0x02079051, 0x02800010, + 0x04603e79, 0x050f80ff, 0x032fa009, 0x070ff000, + 0x0186040c, 0x057dfeff, 0x07ffffff, 0x0581040c, + 0x050f8000, 0x012fa811, 0x0079fe02, 0x070000ff, + 0x077d66ff, 0x060000dc, 0x0781840c, 0x060ff001, + 0x0286840d, 0x064b0002, 0x06420002, 0x060ff002, + 0x05500400, 0x050f80ff, 0x05004084, 0x073fa00a, + 0x06000002, 0x07c00000, 0x04600201, 0x050f80ff, + 0x073fa009, 0x06000001, 0x0079fe02, 0x070000ff, + 0x077d72ff, 0x070000dd, 0x0781840c, 0x064b0002, + 0x06420002, 0x06000001, 0x01800406, 0x0605004c, + 0x0180041e, 0x0493041a, 0x04a004d5, 0x054bc450, + 0x05810421, 0x01d00422, 0x01800421, 0x00800432, + 0x00800434, 0x00800432, 0x008004a7, 0x0180043f, + 0x00800434, 0x01800471, 0x00800432, 0x00800432, + 0x008004ab, 0x00800432, 0x018004af, 0x008004c4, + 0x01800488, 0x00800432, 0x00800432, 0x00209432, + 0x018004e4, 0x0379ff50, 0x070fffff, 0x060ff079, + 0x055c0450, 0x048104a4, 0x002fb008, 0x060ff079, + 0x055c0450, 0x058104a3, 0x04a004c7, 0x0180049c, + 0x0179fe50, 0x070fffff, 0x070050ff, 0x060ff079, + 0x055c0405, 0x04810449, 0x002fb008, 0x060ff079, + 0x055c0405, 0x078184a0, 0x070ff087, 0x017980ff, + 0x06000507, 0x06818451, 0x02203040, 0x05002087, + 0x0049d002, 0x0481046b, 0x04930458, 0x01257000, + 0x073c3fff, 0x0700000f, 0x052e4003, 0x072e5030, + 0x0304c050, 0x02400057, 0x06740057, 0x06000002, + 0x06820016, 0x04002083, 0x07003084, 0x04004085, + 0x06602279, 0x050f80ff, 0x063fa01a, 0x06000001, + 0x05a004cf, 0x07a00578, 0x033e6a00, 0x0302000a, + 0x062e5020, 0x003e4002, 0x07000a00, 0x028003f1, + 0x07420003, 0x0781844e, 0x00798002, 0x06000507, + 0x06818451, 0x0180045c, 0x05930478, 0x01257000, + 0x073c3fff, 0x0700000f, 0x052e4003, 0x072e5030, + 0x0304c050, 0x067800e6, 0x07000041, 0x0581047d, + 0x07a00581, 0x04818016, 0x002fb008, 0x067800e6, + 0x07000041, 0x04810483, 0x07a00581, 0x04818016, + 0x062e5020, 0x003e4002, 0x07000a00, 0x03e00000, + 0x02800010, 0x0379ff50, 0x070fffff, 0x060ff079, + 0x055c0450, 0x0781848e, 0x0245507a, 0x002fb008, + 0x060ff079, 0x055c0450, 0x07818493, 0x0245507a, + 0x002fb008, 0x05600e50, 0x050f80ff, 0x012fa809, + 0x02455001, 0x05600e50, 0x050f80ff, 0x012fa80a, + 0x0080049d, 0x002fb008, 0x003e4002, 0x07000a00, + 0x02800016, 0x079384a3, 0x062e5020, 0x042e4002, + 0x002fb008, 0x013e4000, 0x05000e00, 0x02800016, + 0x0179fe50, 0x070fffff, 0x010210ff, 0x02800016, + 0x0179fe50, 0x070fffff, 0x050340ff, 0x0080049d, + 0x0179fe50, 0x070fffff, 0x0102e0ff, 0x0760282e, + 0x050f80ff, 0x05222000, 0x07223000, 0x05224000, + 0x07225000, 0x07226000, 0x05227000, 0x05228000, + 0x07229000, 0x0722a000, 0x0522b000, 0x063fa051, + 0x07000011, 0x0202c026, 0x0522d000, 0x052e400c, + 0x02800016, 0x030430d4, 0x062e5008, 0x00800176, + 0x05600e50, 0x050f80ff, 0x032fa009, 0x03460000, + 0x018004d2, 0x0246007a, 0x0045207a, 0x008004d0, + 0x0246007a, 0x0600007a, 0x04600e79, 0x050f80ff, + 0x032fa00a, 0x07c00000, 0x029284d5, 0x070500e1, + 0x07c00000, 0x0245f008, 0x048404d9, 0x020e0008, + 0x07c00000, 0x070ff009, 0x065a0008, 0x058404de, + 0x020e0008, 0x07c00000, 0x058404e1, 0x020e0008, + 0x07c00000, 0x05308000, 0x0500d000, 0x04a004dc, + 0x04a004e9, 0x02800010, 0x052e4300, 0x072e500c, + 0x073c3fff, 0x0700000f, 0x07c00000, 0x06602208, + 0x050f80ff, 0x032fa011, 0x076a0000, 0x068184f7, + 0x066a0001, 0x048104f7, 0x04002051, 0x07c00000, + 0x00202001, 0x07c00000, 0x0648307a, 0x00a18608, + 0x05a004cc, 0x05308000, 0x05001000, 0x06009079, + 0x04a004dc, 0x03800560, 0x0249c0e6, 0x058104f9, + 0x0280036d, 0x0648307a, 0x07818196, 0x05a004cf, + 0x05308000, 0x03013000, 0x03209006, 0x04a004dc, + 0x033e6000, 0x07030000, 0x02800345, 0x02490075, + 0x0781051e, 0x04002089, 0x04780102, 0x07f00000, + 0x05001088, 0x07a0056f, 0x04740101, 0x03100000, + 0x060ff002, 0x045c0401, 0x0481851f, 0x00088001, + 0x033e6000, 0x070000c0, 0x0380055c, 0x07f00000, + 0x0220951f, 0x018004e4, 0x0648307a, 0x07810527, + 0x06780075, 0x06000007, 0x0581852e, 0x06a00608, + 0x06486075, 0x06818194, 0x02490075, 0x0781819a, + 0x04487075, 0x05818536, 0x0280053d, 0x05308000, + 0x03010000, 0x06009079, 0x04a004dc, 0x02800010, + 0x0448e0e6, 0x04818352, 0x00800192, 0x05308000, + 0x0500e000, 0x06009079, 0x04a004dc, 0x04008089, + 0x05a004e1, 0x0380055c, 0x05a004cc, 0x05308000, + 0x0700f000, 0x06009079, 0x07000088, 0x06a00545, + 0x04a004dc, 0x02800010, 0x03386000, 0x07030000, + 0x07f00000, 0x078d0548, 0x033e6a00, 0x0202000e, + 0x02079051, 0x0448b075, 0x07810553, 0x02493075, + 0x07810553, 0x05301005, 0x03010000, 0x03800555, + 0x05301006, 0x03010000, 0x05002087, 0x06485002, + 0x05818555, 0x0744c000, 0x01088000, 0x02086001, + 0x07c00000, 0x05001088, 0x07a0056f, 0x0644c001, + 0x00088001, 0x033e6a00, 0x0202000e, 0x004920e6, + 0x05818565, 0x02079051, 0x078d0565, 0x060ff089, + 0x034990ff, 0x0781056c, 0x03386005, 0x03010000, + 0x02800010, 0x03386006, 0x03010000, 0x02800010, + 0x078d056f, 0x03386000, 0x07030000, 0x07f00000, + 0x068d0573, 0x070ff087, 0x074850ff, 0x05818574, + 0x07c00000, 0x078d0578, 0x02386001, 0x07030000, + 0x07f00000, 0x068d057c, 0x070ff087, 0x074850ff, + 0x0581857d, 0x07c00000, 0x05002087, 0x0049d002, + 0x05818590, 0x002fb008, 0x067800e6, 0x07000041, + 0x002fb008, 0x05818590, 0x07a005a6, 0x0448e002, + 0x07810593, 0x0648a002, 0x0481859d, 0x06486002, + 0x06810597, 0x02400057, 0x056a02ff, 0x07c00000, + 0x07a005a6, 0x06788102, 0x06000004, 0x05818590, + 0x04002089, 0x070ff0d4, 0x045c0402, 0x077800ff, + 0x07f00000, 0x05818590, 0x00202010, 0x038c0590, + 0x07f00000, 0x06420002, 0x0481859e, 0x07a00578, + 0x033e6a00, 0x0302000a, 0x07c00000, 0x07f00000, + 0x060ff0a2, 0x050020ff, 0x060ff0a2, 0x045c0402, + 0x048185a7, 0x07c00000, 0x05a00218, 0x03495047, + 0x078105b2, 0x0320901d, 0x02800604, 0x0220901f, + 0x02800604, 0x014980e4, 0x04818010, 0x013e4000, + 0x07003000, 0x05600e35, 0x050f80ff, 0x07a006fc, + 0x01208003, 0x05a004e1, 0x038005cc, 0x03209009, + 0x02800604, 0x03209011, 0x02800604, 0x02209007, + 0x02800604, 0x03209003, 0x02800604, 0x00498043, + 0x058185be, 0x00497043, 0x048185c2, 0x02209001, + 0x02800604, 0x0220900d, 0x02800604, 0x0320900f, + 0x02800604, 0x03493000, 0x068105d5, 0x027c0045, + 0x070a0000, 0x078105de, 0x0220900b, 0x02800604, + 0x02209013, 0x05308000, 0x01012000, 0x04a004dc, + 0x00800183, 0x03209005, 0x02800604, 0x072e500c, + 0x00208002, 0x05a004e1, 0x02800010, 0x02209015, + 0x02800604, 0x072d6000, 0x05308000, 0x05007000, + 0x07f00000, 0x070090d1, 0x0379ff09, 0x0700ffff, + 0x04a004dc, 0x03209017, 0x02800604, 0x033e5000, + 0x06000080, 0x02209019, 0x02800604, 0x072d6000, + 0x033e5000, 0x06000080, 0x07f00000, 0x060ff0d0, + 0x0179feff, 0x0700ffff, 0x057dfeff, 0x0700ffff, + 0x04818010, 0x02400058, 0x00642058, 0x06820010, + 0x033e5000, 0x06000080, 0x04058051, 0x0320901b, + 0x02800604, 0x05308000, 0x01012000, 0x04a004dc, + 0x00800176, 0x05a00218, 0x05308000, 0x05008000, + 0x06009079, 0x04a004dc, 0x07c00000, 0x034900e4, + 0x05818618, 0x013e4000, 0x070000c0, 0x07f00000, + 0x034900e4, 0x04818616, 0x07c00000, 0x013e4000, + 0x06000080, 0x07f00000, 0x07f00000, 0x07f00000, + 0x034900e4, 0x06810610, 0x03800618, 0x072d6000, + 0x00498043, 0x06810632, 0x060ff0d0, 0x0179feff, + 0x0700ffff, 0x057dfeff, 0x0700ffff, 0x058185e2, + 0x050f8030, 0x032fa009, 0x0379ff00, 0x0700ffff, + 0x070ff0d1, 0x0179feff, 0x0700ffff, 0x055c0400, + 0x078105e2, 0x04004051, 0x0280067a, 0x06a006dc, + 0x062d6001, 0x020ef004, 0x038605e4, 0x06600004, + 0x050f80ff, 0x032fa009, 0x074b0000, 0x05002000, + 0x0769ff00, 0x01640800, 0x078205e4, 0x01640e00, + 0x058285e4, 0x070ff036, 0x045c0404, 0x0581864d, + 0x072d6000, 0x050f8030, 0x032fa009, 0x0379ff00, + 0x0700ffff, 0x070ff0d1, 0x0179feff, 0x0700ffff, + 0x055c0400, 0x078105e2, 0x04482034, 0x078105ff, + 0x06483034, 0x058185ff, 0x070ff0d4, 0x077800ff, + 0x070000f0, 0x037c00ff, 0x06000010, 0x0681067a, + 0x06a006d6, 0x024900e5, 0x0681065d, 0x033e5000, + 0x06000080, 0x02800010, 0x04601c04, 0x050f80ff, + 0x053fa809, 0x06000020, 0x030ef041, 0x038605ee, + 0x062d6002, 0x05602a41, 0x050f80ff, 0x012fa809, + 0x060ff0d0, 0x074b00ff, 0x045c0401, 0x05818678, + 0x062d6001, 0x07602841, 0x050f80ff, 0x053fa809, + 0x06000001, 0x070ff0d1, 0x054b80ff, 0x074b0003, + 0x055c0403, 0x05818678, 0x033e5000, 0x06000080, + 0x0080070e, 0x07600041, 0x0280065e, 0x06a006d6, + 0x024900e5, 0x06810680, 0x033e5000, 0x06000080, + 0x02800010, 0x06a006c2, 0x030ef041, 0x028605f2, + 0x04058051, 0x072d6000, 0x05601041, 0x050f80ff, + 0x012fa809, 0x0600a0d0, 0x0500b0d1, 0x062d6001, + 0x07f00000, 0x07f00000, 0x0600c0d0, 0x0500d0d1, + 0x062d6002, 0x0279ff0d, 0x07ff0000, 0x044d800d, + 0x060ff0d0, 0x074b00ff, 0x065a000d, 0x06601201, + 0x050f80ff, 0x073fa022, 0x07000005, 0x0079fe0d, + 0x070000ff, 0x050020ff, 0x05602a41, 0x050f80ff, + 0x073fa00a, 0x06000001, 0x020ef004, 0x028606bf, + 0x04601c04, 0x050f80ff, 0x053fa809, 0x06000001, + 0x050f80ff, 0x053fa80a, 0x06000020, 0x07602841, + 0x050f80ff, 0x073fa009, 0x06000001, 0x0279ff02, + 0x070000ff, 0x0678000d, 0x0700ff00, 0x065a0002, + 0x07602841, 0x050f80ff, 0x073fa00a, 0x06000001, + 0x07600041, 0x050f80ff, 0x053fa80a, 0x06000001, + 0x07601241, 0x050f80ff, 0x073fa00a, 0x06000002, + 0x033e5000, 0x06000080, 0x0080070e, 0x040f8032, + 0x073fa011, 0x06000001, 0x060ff002, 0x055c0403, + 0x058186ca, 0x00041051, 0x07c00000, 0x04600402, + 0x04500432, 0x050f80ff, 0x053fa809, 0x06000020, + 0x00400402, 0x01680eff, 0x070030ff, 0x040f8032, + 0x053fa80a, 0x06000001, 0x07c00000, 0x024900e5, + 0x068106d9, 0x07c00000, 0x033e5000, 0x070000c0, + 0x07c00000, 0x05004036, 0x060000d0, 0x0179fe00, + 0x0700ffff, 0x057dfeff, 0x0700ffff, 0x068106fb, + 0x070000d1, 0x0379ff00, 0x0700ffff, 0x06005051, + 0x060ff031, 0x05500405, 0x050f80ff, 0x073fa009, + 0x06000002, 0x020ef004, 0x038606f5, 0x04600404, + 0x050f80ff, 0x012fa809, 0x0079fe01, 0x0700ffff, + 0x055c0400, 0x068106fb, 0x01400405, 0x070050ff, + 0x057de0ff, 0x06000007, 0x058186e7, 0x04004051, + 0x07c00000, 0x072d6000, 0x07f00000, 0x07f00000, + 0x000110d0, 0x010120d1, 0x062d6001, 0x07f00000, + 0x07f00000, 0x020130d0, 0x010140d1, 0x062d6002, + 0x010170d4, 0x07f00000, 0x020150d0, 0x030160d1, + 0x053fa83a, 0x06000008, 0x07c00000, 0x07600c41, + 0x050f80ff, 0x073fa009, 0x06000001, 0x04780102, + 0x07ffff00, 0x046a0702, 0x050f80ff, 0x073fa00a, + 0x06000001, 0x05600e41, 0x050f80ff, 0x032fa069, + 0x03800053, 0xba6b4e34, 0x02800004, 0x00000000, + 0x00008000, 0x00000518, 0x040f801f, 0x012fa8c9, + 0x040f801f, 0x073fa081, 0x06000010, 0x03200005, + 0x07420000, 0x050fb000, 0x040f801f, 0x073fa011, + 0x06000038, 0x040f801f, 0x053fa859, 0x0700003a, + 0x050fe000, 0x0581800a, 0x0684003d, 0x04958019, + 0x030e0011, 0x072e4200, 0x03800014, 0x0291001f, + 0x050010c0, 0x04482001, 0x058180e8, 0x06483001, + 0x0781814b, 0x02920029, 0x068b0029, 0x018a0150, + 0x050010c0, 0x06780001, 0x050007c0, 0x06818223, + 0x06780001, 0x0500f800, 0x07818263, 0x03910030, + 0x040fe029, 0x03860030, 0x076c001d, 0x04810294, + 0x076c0a1d, 0x048102b9, 0x0292003d, 0x040fe02f, + 0x0286003d, 0x06000013, 0x050fb000, 0x066c0073, + 0x068103c2, 0x0297003d, 0x014920e4, 0x0481803d, + 0x03400000, 0x076c0a00, 0x04818034, 0x0796003f, + 0x03b900b8, 0x05908014, 0x010170e1, 0x07780017, + 0x03e00000, 0x06810092, 0x050010ff, 0x0179fe17, + 0x031fffff, 0x070000ff, 0x05600800, 0x050f80ff, + 0x073fa009, 0x06000001, 0x06780002, 0x02800040, + 0x037c00ff, 0x03800000, 0x0681005e, 0x0249f002, + 0x068100ab, 0x0448e002, 0x0681005e, 0x07600c00, + 0x050f80ff, 0x073fa009, 0x06000001, 0x06780002, + 0x07ffff00, 0x037c00ff, 0x05000200, 0x048180ab, + 0x064bd401, 0x03d00060, 0x038000a9, 0x02800068, + 0x03800072, 0x0280007c, 0x02800086, 0x03800090, + 0x038000a9, 0x038000a9, 0x050fe027, 0x0186806c, + 0x01028000, 0x0380006f, 0x07600027, 0x050f80ff, + 0x032fa00a, 0x01027000, 0x02400029, 0x028000ab, + 0x040fe025, 0x00868076, 0x03026000, 0x02800079, + 0x06600025, 0x050f80ff, 0x032fa00a, 0x03025000, + 0x02400029, 0x028000ab, 0x050fe021, 0x00868080, + 0x01022000, 0x02800083, 0x07600021, 0x050f80ff, + 0x032fa00a, 0x01021000, 0x02400029, 0x028000ab, + 0x040fe023, 0x0086808a, 0x01024000, 0x0380008d, + 0x06600023, 0x050f80ff, 0x032fa00a, 0x03023000, + 0x02400029, 0x028000ab, 0x06a000c8, 0x028000ab, + 0x01640817, 0x058280a9, 0x070ff017, 0x03d00096, + 0x0280009e, 0x038000a0, 0x038000a3, 0x038000a6, + 0x038000a9, 0x038000a9, 0x038000a9, 0x038000a9, + 0x03e00000, 0x03800014, 0x059080a0, 0x030160e1, + 0x028000ab, 0x059080a3, 0x030150e1, 0x028000ab, + 0x059080a6, 0x010140e1, 0x028000ab, 0x060fc013, + 0x06a00510, 0x03800014, 0x072e4800, 0x07000012, + 0x038000bb, 0x0747f000, 0x05600800, 0x050f80ff, + 0x012fa809, 0x0249f001, 0x078100bb, 0x01012000, + 0x052e4c00, 0x07c00000, 0x070000eb, 0x0349f000, + 0x058180af, 0x05600800, 0x050f80ff, 0x012fa809, + 0x0448e001, 0x068100c1, 0x07c00000, 0x0079c101, + 0x07ffffff, 0x027a4b01, 0x03800000, 0x05600800, + 0x050f80ff, 0x012fa80a, 0x07600c00, 0x050f80ff, + 0x012fa821, 0x06780001, 0x07ffff00, 0x037c00ff, + 0x05000700, 0x078100dd, 0x06601804, 0x070030ff, + 0x050f80ff, 0x012fa809, 0x05002000, 0x050f8003, + 0x073fa00a, 0x06000001, 0x040fe001, 0x038600de, + 0x04600201, 0x050f80ff, 0x032fa00a, 0x07c00000, + 0x050fe02e, 0x008680e3, 0x0102e000, 0x0302f000, + 0x038000e7, 0x0760002e, 0x050f80ff, 0x032fa00a, + 0x0102e000, 0x07c00000, 0x022c0004, 0x056c041d, + 0x078100fc, 0x056c021d, 0x04810113, 0x056c081d, + 0x04810125, 0x076c061d, 0x0581013f, 0x0521d000, + 0x0202c013, 0x0202a013, 0x02020013, 0x0460021a, + 0x050f80ff, 0x053fa80a, 0x07000009, 0x03b600ac, + 0x0484801f, 0x0280003d, 0x040fe02a, 0x028600f2, + 0x06000013, 0x04001013, 0x0560102b, 0x050f80ff, + 0x032fa012, 0x06420029, 0x0660002a, 0x050f80ff, + 0x053fa809, 0x06000001, 0x050fe003, 0x00860110, + 0x01028003, 0x0660002a, 0x050f80ff, 0x053fa80a, + 0x07000009, 0x00800140, 0x00028013, 0x00027013, + 0x00800140, 0x040fe02a, 0x028600f1, 0x06420029, + 0x0660002a, 0x050f80ff, 0x053fa809, 0x06000001, + 0x050fe003, 0x01860122, 0x03026003, 0x0660002a, + 0x050f80ff, 0x053fa80a, 0x07000009, 0x00800140, + 0x02026013, 0x02025013, 0x00800140, 0x040fe02a, + 0x028600f1, 0x06420029, 0x0660002a, 0x050f80ff, + 0x053fa809, 0x06000001, 0x050fe003, 0x00860134, + 0x01022003, 0x0660002a, 0x050f80ff, 0x053fa80a, + 0x07000009, 0x01800136, 0x00022013, 0x00021013, + 0x0647f020, 0x007a0120, 0x04000101, 0x04a00285, + 0x0400802a, 0x05a004f5, 0x009480f1, 0x0521d005, + 0x028000f2, 0x038000fa, 0x0647f020, 0x06486020, + 0x06818145, 0x04a00285, 0x028000f1, 0x007a0120, + 0x04000101, 0x04a00285, 0x0400802a, 0x05a004f5, + 0x028000f1, 0x040fd02a, 0x052e4003, 0x00208010, + 0x05a004f5, 0x038000fa, 0x00018098, 0x07480018, + 0x06818161, 0x05481018, 0x0781815f, 0x05482018, + 0x0681815d, 0x07483018, 0x0681815b, 0x002fb004, + 0x00800162, 0x012fb003, 0x00800162, 0x002fb002, + 0x00800162, 0x002fb001, 0x00800162, 0x012fb000, + 0x0179fe78, 0x070000ff, 0x030190ff, 0x00017086, + 0x058b0166, 0x03385000, 0x03020000, 0x07780017, + 0x00430407, 0x078181ee, 0x046c0419, 0x048101a2, + 0x046c0219, 0x05810172, 0x07219000, 0x00800186, + 0x07219000, 0x07483017, 0x0481018c, 0x05482017, + 0x05810193, 0x0448b075, 0x06818186, 0x06601476, + 0x050f80ff, 0x073fa022, 0x0600003e, 0x06000080, + 0x05001081, 0x05002082, 0x06003083, 0x05004084, + 0x04601c76, 0x050f80ff, 0x022fa02a, 0x07219000, + 0x07780078, 0x07ffff00, 0x045a0419, 0x010780ff, + 0x0484801f, 0x0280003d, 0x040fe07f, 0x0086019b, + 0x05a001bb, 0x00920186, 0x040fe07f, 0x07a681bb, + 0x00800186, 0x0560107b, 0x050f80ff, 0x032fa009, + 0x0744f000, 0x0560107b, 0x050f80ff, 0x032fa00a, + 0x00800179, 0x052e400c, 0x040080fb, 0x046aa108, + 0x06009076, 0x04002075, 0x05a004fc, 0x00800186, + 0x06219001, 0x05482017, 0x058101af, 0x058b01a5, + 0x060ff086, 0x0349f0ff, 0x07818165, 0x07483017, + 0x058101ac, 0x050fd0ff, 0x040fe07f, 0x07a681bb, + 0x00800186, 0x05004084, 0x05a00205, 0x00920186, + 0x070ff07d, 0x0450047c, 0x056004ff, 0x050f80ff, + 0x032fa009, 0x070ff000, 0x00540479, 0x030790ff, + 0x01800193, 0x060ff079, 0x0054047a, 0x058201e7, + 0x058101e7, 0x070ff07d, 0x0450047c, 0x050f80ff, + 0x002fa819, 0x058b01c3, 0x02080001, 0x00081002, + 0x01082003, 0x048b01c7, 0x03385000, 0x03010000, + 0x02400019, 0x070ff003, 0x04500479, 0x030790ff, + 0x0340007e, 0x0642007f, 0x058101e7, 0x070ff07e, + 0x050f80ff, 0x032fa009, 0x050fe000, 0x028681e6, + 0x070ff07d, 0x056002ff, 0x050f80ff, 0x032fa009, + 0x0107d000, 0x018601e8, 0x0560087d, 0x050f80ff, + 0x032fa009, 0x0569fe00, 0x0550041b, 0x050f80ff, + 0x032fa009, 0x0107e000, 0x070ff07e, 0x018001d2, + 0x0307c000, 0x07c00000, 0x052e400c, 0x040080fb, + 0x046aa108, 0x06009076, 0x04002075, 0x018004fc, + 0x040fd076, 0x050fd017, 0x060ff086, 0x077800ff, + 0x07000060, 0x037c00ff, 0x07000060, 0x078181f0, + 0x07780078, 0x07ffff00, 0x045a0419, 0x010780ff, + 0x06601476, 0x050f80ff, 0x073fa022, 0x0600003e, + 0x052e400c, 0x040080fb, 0x066a8108, 0x06009076, + 0x04002075, 0x05a004fc, 0x02800029, 0x0240007f, + 0x0742007e, 0x050f807e, 0x032fa009, 0x050fe000, + 0x0286821f, 0x070ff07d, 0x055c047b, 0x05810214, + 0x0760007d, 0x050f80ff, 0x032fa009, 0x050fe000, + 0x03868214, 0x070ff07b, 0x0107d0ff, 0x0560087d, + 0x050f80ff, 0x032fa009, 0x03681e00, 0x0450041c, + 0x0107e0ff, 0x050f80ff, 0x032fa009, 0x050fe000, + 0x01860221, 0x0307c000, 0x07c00000, 0x040fd076, + 0x02800510, 0x010180c0, 0x0548e018, 0x0781823c, + 0x0748f018, 0x06818238, 0x03490018, 0x06818234, + 0x01491018, 0x07818230, 0x073c0000, 0x06000040, + 0x02200004, 0x0180023f, 0x073c0000, 0x06000020, + 0x03200003, 0x0180023f, 0x073c0000, 0x06000010, + 0x02200002, 0x0180023f, 0x073c0000, 0x06000008, + 0x02200001, 0x0180023f, 0x073c0000, 0x06000004, + 0x06000013, 0x050fb000, 0x040fe076, 0x00860258, + 0x046c0273, 0x04810268, 0x066c0073, 0x04810249, + 0x040fd076, 0x06a00510, 0x03800014, 0x040fd076, + 0x0080024c, 0x00452075, 0x00077013, 0x0647f075, + 0x06486075, 0x06818252, 0x05a0028b, 0x00800258, + 0x007a0175, 0x04000101, 0x05a0028b, 0x04008076, + 0x0245f008, 0x05a004f5, 0x07273000, 0x05600272, + 0x050f80ff, 0x053fa80a, 0x07000009, 0x0379ff78, + 0x070000ff, 0x02076013, 0x02075013, 0x0484801f, + 0x0280003d, 0x070fc0ff, 0x052e400c, 0x00208020, + 0x05a004f5, 0x00800261, 0x04600276, 0x050010ff, + 0x040f8001, 0x032fa009, 0x040f8001, 0x053fa80a, + 0x07000009, 0x070ff000, 0x0286827a, 0x06601276, + 0x050f80ff, 0x073fa009, 0x0700000c, 0x07601818, + 0x050f80ff, 0x053fa80a, 0x07000009, 0x0180027b, + 0x07a000de, 0x0448b075, 0x0581024b, 0x06000013, + 0x04001013, 0x0560107b, 0x050f80ff, 0x032fa012, + 0x0046b075, 0x03b600ac, 0x0080024c, 0x06000020, + 0x04001016, 0x0460082a, 0x050f80ff, 0x032fa012, + 0x07c00000, 0x06000075, 0x040010a2, 0x044b0801, + 0x060ff016, 0x065a0001, 0x04600876, 0x050f80ff, + 0x032fa012, 0x07c00000, 0x050fe022, 0x0186029a, + 0x0421d004, 0x0302a022, 0x04a002c1, 0x018002b1, + 0x040fe026, 0x008602b3, 0x0421d001, 0x0202a026, + 0x04a002c1, 0x0202c013, 0x00683e20, 0x070060ff, + 0x056c0206, 0x048102f4, 0x056c0406, 0x0781030a, + 0x076c0606, 0x06810379, 0x056c1606, 0x078182b1, + 0x04488020, 0x07810387, 0x040fd02a, 0x0521d000, + 0x0202a013, 0x02020013, 0x008002b3, 0x04a004ec, + 0x008002bf, 0x050fe028, 0x008602bf, 0x0302a028, + 0x0421d002, 0x04a002c1, 0x008002c8, 0x050fe022, + 0x008602bf, 0x0421d004, 0x0302a022, 0x04a002c1, + 0x04a004ec, 0x05848030, 0x0280003d, 0x0460082a, + 0x050f80ff, 0x022fa031, 0x03020000, 0x0002b004, + 0x01018005, 0x07c00000, 0x0400702a, 0x06a003ba, + 0x007a0101, 0x07060000, 0x07303000, 0x07008290, + 0x07600018, 0x050f80ff, 0x053fa809, 0x07000003, + 0x0448e007, 0x068182d6, 0x06006013, 0x018002dd, + 0x02400010, 0x048102d6, 0x06006010, 0x0460322a, + 0x050f80ff, 0x073fa00a, 0x07000003, 0x050f801e, + 0x032fa03a, 0x063aa020, 0x06000002, 0x013e4000, + 0x07000030, 0x009802e3, 0x070ff0f6, 0x036830ff, + 0x078182e4, 0x070f001e, 0x0560102b, 0x050f10ff, + 0x063f3c08, 0x0600000d, 0x013e4000, 0x06000020, + 0x040f801a, 0x0320000a, 0x022017d0, 0x032fa012, + 0x0202c013, 0x008002bf, 0x04007013, 0x06a003ba, + 0x007a0101, 0x07050000, 0x07303000, 0x07008890, + 0x074d0005, 0x06006013, 0x050f801e, 0x032fa03a, + 0x05601a2b, 0x050f80ff, 0x022fa019, 0x04001002, + 0x04002013, 0x040f801f, 0x022fa01a, 0x073aa00c, + 0x06000002, 0x07300c03, 0x0600000d, 0x028003a7, + 0x04007013, 0x06a003ba, 0x007a0101, 0x03070000, + 0x0660282a, 0x050f80ff, 0x073fa009, 0x06000004, + 0x02499008, 0x07810317, 0x07303000, 0x07008890, + 0x02800319, 0x07303000, 0x04008980, 0x05007003, + 0x074d0005, 0x06006013, 0x050f801e, 0x032fa03a, + 0x0760142b, 0x050f80ff, 0x032fa021, 0x064b0002, + 0x02499008, 0x06810325, 0x0644c002, 0x054b0400, + 0x050040ff, 0x06698104, 0x0581833a, 0x06000013, + 0x04001013, 0x04780102, 0x06000010, 0x06003013, + 0x04004013, 0x06005013, 0x06006013, 0x04007013, + 0x00644015, 0x07820336, 0x04448002, 0x02205008, + 0x040f801f, 0x032fa042, 0x04008015, 0x03800371, + 0x046c8004, 0x05818348, 0x01208018, 0x06780002, + 0x07000003, 0x0581834b, 0x06003001, 0x06000013, + 0x04001013, 0x04004013, 0x06005013, 0x040f801f, + 0x022fa032, 0x03800371, 0x040fd02a, 0x06a00510, + 0x03800014, 0x04488002, 0x07810350, 0x070ff003, + 0x04500408, 0x050080ff, 0x06489002, 0x06810357, + 0x0379ff00, 0x070000ff, 0x070ff000, 0x04500408, + 0x050080ff, 0x07005003, 0x05004000, 0x06003001, + 0x06000013, 0x04001013, 0x040f801f, 0x022fa032, + 0x05601c2b, 0x050f80ff, 0x022fa031, 0x06600c1f, + 0x050f80ff, 0x022fa032, 0x02680608, 0x07810371, + 0x016408ff, 0x057dfeff, 0x07ffffff, 0x034000ff, + 0x045a0407, 0x070000ff, 0x0760061e, 0x050f80ff, + 0x032fa00a, 0x06600908, 0x0669f908, 0x027a0008, + 0x06000020, 0x070aa0ff, 0x014a20ff, 0x037a00ff, + 0x060000dc, 0x070000ff, 0x028003a7, 0x04007013, + 0x06a003ba, 0x007a0101, 0x07030000, 0x07303000, + 0x07008190, 0x06006013, 0x050f801e, 0x032fa03a, + 0x073aa000, 0x06000002, 0x07300c00, 0x07000005, + 0x028003a7, 0x04007013, 0x06a003ba, 0x007a0101, + 0x07810000, 0x07303000, 0x07000090, 0x06006013, + 0x06600c2a, 0x050f80ff, 0x053fa809, 0x07000003, + 0x04780107, 0x07ffff00, 0x007c0107, 0x07000500, + 0x0581839a, 0x07303000, 0x05000890, 0x074d0005, + 0x0660282a, 0x050f80ff, 0x053fa809, 0x07000003, + 0x0049d007, 0x068103a1, 0x02206001, 0x050f801e, + 0x032fa03a, 0x073aa000, 0x06000002, 0x07300c00, + 0x07000005, 0x013e4000, 0x07000030, 0x039803a9, + 0x070ff0f6, 0x036830ff, 0x058183aa, 0x070f001e, + 0x040f101f, 0x070f3000, 0x013e4000, 0x06000020, + 0x040f801a, 0x0320000a, 0x022017d0, 0x032fa012, + 0x008002bf, 0x03200000, 0x06006076, 0x028003bc, + 0x03200011, 0x0600602a, 0x05a00441, 0x05600406, + 0x050f80ff, 0x053fa809, 0x06000002, 0x07c00000, + 0x0207602f, 0x04600876, 0x050f80ff, 0x022fa031, + 0x03075000, 0x0007b004, 0x01018005, 0x06600076, + 0x050020ff, 0x050f80ff, 0x012fa809, 0x0202f001, + 0x008683d0, 0x0002e013, 0x040f8002, 0x053fa80a, + 0x07000009, 0x06273001, 0x0448b075, 0x048183da, + 0x04602076, 0x050f80ff, 0x053fa811, 0x0700003c, + 0x0179fe78, 0x070000ff, 0x030190ff, 0x018683e2, + 0x07a003f6, 0x00078019, 0x039203f5, 0x0180043a, + 0x040fd076, 0x040fd019, 0x04600276, 0x050020ff, + 0x050f80ff, 0x032fa009, 0x040f8002, 0x053fa80a, + 0x07000009, 0x050fe000, 0x008683f2, 0x07601818, + 0x050f80ff, 0x053fa80a, 0x07000009, 0x038003f3, + 0x07a000de, 0x07273000, 0x02076013, 0x0280003d, + 0x078b03f6, 0x03385000, 0x07030000, 0x05600818, + 0x050f80ff, 0x032fa009, 0x054b0400, 0x0308a0ff, + 0x0179fe00, 0x070000ff, 0x010880ff, 0x0448b075, + 0x04810410, 0x0760147b, 0x050f80ff, 0x002fa819, + 0x064b0001, 0x02080002, 0x01081003, 0x00082001, + 0x02083001, 0x02079001, 0x0207a001, 0x00084013, + 0x0207f013, 0x00800432, 0x06485075, 0x05810428, + 0x02465075, 0x06601476, 0x050f80ff, 0x073fa021, + 0x0600003e, 0x070ff07d, 0x0450047c, 0x050f80ff, + 0x002fa819, 0x058b041b, 0x02080001, 0x00081002, + 0x01082003, 0x03079003, 0x0208307a, 0x0340007e, + 0x0642007f, 0x0581042d, 0x070ff07e, 0x05a001d2, + 0x0392842d, 0x01800439, 0x058b0428, 0x06601476, + 0x050f80ff, 0x073fa041, 0x0600003e, 0x06602476, + 0x050f80ff, 0x073fa009, 0x06000007, 0x0008400e, + 0x048b0432, 0x03385000, 0x03010000, 0x06219001, + 0x040fe07f, 0x01860439, 0x018001bb, 0x07c00000, + 0x00683e75, 0x0581043f, 0x0448d075, 0x05810465, + 0x01800493, 0x05a004f0, 0x038003f5, 0x0297844c, + 0x07602418, 0x050f80ff, 0x012fa809, 0x06780001, + 0x070000ff, 0x075a0000, 0x070ff014, 0x0569feff, + 0x054b08ff, 0x075a0000, 0x05600418, 0x050f80ff, + 0x012fa809, 0x040fe007, 0x03868453, 0x01204000, + 0x00800461, 0x00700101, 0x03010000, 0x06780001, + 0x07ff0000, 0x076c00ff, 0x0681845b, 0x00700101, + 0x03010000, 0x05600418, 0x050f80ff, 0x012fa80a, + 0x06780001, 0x07ff0000, 0x050040ff, 0x0279ff01, + 0x0700ffff, 0x05002014, 0x07c00000, 0x04007076, + 0x0448b075, 0x0481047f, 0x03200011, 0x06006076, + 0x06a003bc, 0x007a0101, 0x07060000, 0x07303000, + 0x07008290, 0x07600018, 0x050f80ff, 0x053fa809, + 0x07000003, 0x0448e007, 0x07818477, 0x06006013, + 0x0180048e, 0x02400010, 0x05810477, 0x06006010, + 0x04603276, 0x050f80ff, 0x073fa00a, 0x07000003, + 0x0180048e, 0x04602a76, 0x050f80ff, 0x032fa009, + 0x060ff07a, 0x05500400, 0x070000ff, 0x04602a76, + 0x050f80ff, 0x032fa00a, 0x07a003b7, 0x007a0101, + 0x03010000, 0x06303008, 0x05008000, 0x0600600e, + 0x050f8074, 0x032fa03a, 0x053079a0, 0x0700000c, + 0x008004d3, 0x00683e75, 0x076c0aff, 0x058104b2, + 0x04007013, 0x03200011, 0x06006076, 0x06a003bc, + 0x007a0101, 0x03070000, 0x06602876, 0x050f80ff, + 0x053fa809, 0x06000001, 0x03499003, 0x048104a7, + 0x07303000, 0x07008890, 0x053079a0, 0x0700000c, + 0x008004ab, 0x07303000, 0x04008980, 0x04307920, + 0x0700000c, 0x074d0005, 0x06006013, 0x050f8074, + 0x032fa03a, 0x04307920, 0x0700000c, 0x008004d3, + 0x04602a76, 0x050f80ff, 0x032fa009, 0x060ff07a, + 0x05500400, 0x070000ff, 0x04602a76, 0x050f80ff, + 0x032fa00a, 0x04007076, 0x07a003b7, 0x007a0101, + 0x03010000, 0x06303008, 0x07008800, 0x074d0005, + 0x06600a76, 0x050f80ff, 0x073fa009, 0x07000003, + 0x054b0406, 0x045a0404, 0x050040ff, 0x0600600e, + 0x050f8074, 0x032fa03a, 0x0648c075, 0x058104d1, + 0x06307d20, 0x0700000c, 0x008004d3, 0x04307920, + 0x0700000c, 0x013e4000, 0x07000030, 0x009804d5, + 0x070ff0f6, 0x074850ff, 0x068184d6, 0x050f2074, + 0x060a0007, 0x040070fb, 0x046a7007, 0x050f40ff, + 0x013e4000, 0x06000020, 0x0678007a, 0x07fff000, + 0x068184e6, 0x0320000a, 0x022017d0, 0x008004e9, + 0x0320000a, 0x06301b58, 0x06000001, 0x050f8072, + 0x032fa012, 0x038003f5, 0x01208060, 0x0600902a, + 0x04002020, 0x018004fc, 0x040080fb, 0x066ae108, + 0x06009076, 0x04002075, 0x018004fc, 0x03201100, + 0x078484fa, 0x06420001, 0x078184f6, 0x02800513, + 0x020e0008, 0x07c00000, 0x050fd009, 0x040fd008, + 0x03201100, 0x05848503, 0x06420001, 0x078184ff, + 0x02800513, 0x007a0102, 0x04000101, 0x05600809, + 0x050f80ff, 0x073fa00a, 0x06000001, 0x020e0008, + 0x0684050d, 0x030e0009, 0x07c00000, 0x01011009, + 0x052e4300, 0x07c00000, 0x052e400f, 0x01208090, + 0x018004f5, 0x070fc0ff, 0x040f8013, 0x032fa009, + 0x02800516, 0x15416ea9, 0xffef0b01 +}; + +#ifdef UNIQUE_FW_NAME +uint32_t fw2400_length02 = 0x000014ff ; +#else +uint32_t risc_code_length02 = 0x000014ff ; +#endif + -- cgit v1.2.3-70-g09d2 From 47be1e0ee1f484c8127f306e06ed3be91add07ee Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:27 -0500 Subject: [SCSI] sym2: Remove FreeBSD ifdefs Remove FreeBSD ifdefs from sym2 driver Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_fw.c | 12 ------------ drivers/scsi/sym53c8xx_2/sym_malloc.c | 4 ---- 2 files changed, 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c index fd36cf9858c..a7528a8331b 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.c +++ b/drivers/scsi/sym53c8xx_2/sym_fw.c @@ -37,11 +37,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifdef __FreeBSD__ -#include -#else #include "sym_glue.h" -#endif /* * Macros used for all firmwares. @@ -60,11 +56,7 @@ #define SYM_FWA_SCR sym_fw1a_scr #define SYM_FWB_SCR sym_fw1b_scr #define SYM_FWZ_SCR sym_fw1z_scr -#ifdef __FreeBSD__ -#include -#else #include "sym_fw1.h" -#endif static struct sym_fwa_ofs sym_fw1a_ofs = { SYM_GEN_FW_A(struct SYM_FWA_SCR) }; @@ -88,11 +80,7 @@ static struct sym_fwz_ofs sym_fw1z_ofs = { #define SYM_FWA_SCR sym_fw2a_scr #define SYM_FWB_SCR sym_fw2b_scr #define SYM_FWZ_SCR sym_fw2z_scr -#ifdef __FreeBSD__ -#include -#else #include "sym_fw2.h" -#endif static struct sym_fwa_ofs sym_fw2a_ofs = { SYM_GEN_FW_A(struct SYM_FWA_SCR) }; diff --git a/drivers/scsi/sym53c8xx_2/sym_malloc.c b/drivers/scsi/sym53c8xx_2/sym_malloc.c index a34d403ccc6..92bf9b14a7a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_malloc.c +++ b/drivers/scsi/sym53c8xx_2/sym_malloc.c @@ -37,11 +37,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifdef __FreeBSD__ -#include -#else #include "sym_glue.h" -#endif /* * Simple power of two buddy-like generic allocator. -- cgit v1.2.3-70-g09d2 From 760c9de589175f5285668d17825c259aec08370c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:29 -0500 Subject: [SCSI] sym2: Remove last vestiges of sym_sniff_inquiry The SYM_OPT_SNIFF_INQUIRY define is never set any more, and the sym_sniff_inquiry() function doesn't exist From: Christoph Hellwig Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.h | 1 - drivers/scsi/sym53c8xx_2/sym_hipd.c | 9 --------- 2 files changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index d3d52f14d7c..c61c23fcce5 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -268,6 +268,5 @@ void sym_xpt_async_bus_reset(struct sym_hcb *np); void sym_xpt_async_sent_bdr(struct sym_hcb *np, int target); int sym_setup_data_and_start (struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp); void sym_log_bus_error(struct sym_hcb *np); -void sym_sniff_inquiry(struct sym_hcb *np, struct scsi_cmnd *cmd, int resid); #endif /* SYM_GLUE_H */ diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index a7420cad454..113e3b35716 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -5551,15 +5551,6 @@ if (resid) */ sym_set_cam_result_ok(cp, cmd, resid); -#ifdef SYM_OPT_SNIFF_INQUIRY - /* - * On standard INQUIRY response (EVPD and CmDt - * not set), sniff out device capabilities. - */ - if (cp->cdb_buf[0] == INQUIRY && !(cp->cdb_buf[1] & 0x3)) - sym_sniff_inquiry(np, cmd, resid); -#endif - #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING /* * If max number of started ccbs had been reduced, -- cgit v1.2.3-70-g09d2 From 84e203a279d3de1c8a41a73ab45e55a89bc19345 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:31 -0500 Subject: [SCSI] sym2: Manage sym_lcb properly Allocate the lcb in slave_alloc and free it in slave_destroy. This allows us to remove all the code that checks to see if it's already been allocated. From: Christoph Hellwig Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 59 +++++++++++++------------ drivers/scsi/sym53c8xx_2/sym_hipd.c | 86 +++---------------------------------- drivers/scsi/sym53c8xx_2/sym_hipd.h | 14 ------ 3 files changed, 38 insertions(+), 121 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 7fc0b97173e..a2bfdf8417a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -563,10 +563,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s /* * activate this job. */ - if (lp) - sym_start_next_ccbs(np, lp, 2); - else - sym_put_start_queue(np, cp); + sym_start_next_ccbs(np, lp, 2); return 0; out_abort: @@ -981,15 +978,13 @@ static int device_queue_depth(struct sym_hcb *np, int target, int lun) static int sym53c8xx_slave_alloc(struct scsi_device *sdev) { - struct sym_hcb *np; - struct sym_tcb *tp; + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_tcb *tp = &np->target[sdev->id]; + struct sym_lcb *lp; if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN) return -ENXIO; - np = sym_get_hcb(sdev->host); - tp = &np->target[sdev->id]; - /* * Fail the device init if the device is flagged NOSCAN at BOOT in * the NVRAM. This may speed up boot and maintain coherency with @@ -1005,6 +1000,10 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) return -ENXIO; } + lp = sym_alloc_lcb(np, sdev->id, sdev->lun); + if (!lp) + return -ENOMEM; + tp->starget = sdev->sdev_target; return 0; } @@ -1012,21 +1011,13 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) /* * Linux entry point for device queue sizing. */ -static int sym53c8xx_slave_configure(struct scsi_device *device) +static int sym53c8xx_slave_configure(struct scsi_device *sdev) { - struct sym_hcb *np = sym_get_hcb(device->host); - struct sym_tcb *tp = &np->target[device->id]; - struct sym_lcb *lp; + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_tcb *tp = &np->target[sdev->id]; + struct sym_lcb *lp = sym_lp(tp, sdev->lun); int reqtags, depth_to_use; - /* - * Allocate the LCB if not yet. - * If it fail, we may well be in the sh*t. :) - */ - lp = sym_alloc_lcb(np, device->id, device->lun); - if (!lp) - return -ENOMEM; - /* * Get user flags. */ @@ -1038,10 +1029,10 @@ static int sym53c8xx_slave_configure(struct scsi_device *device) * Use at least 2. * Donnot use more than our maximum. */ - reqtags = device_queue_depth(np, device->id, device->lun); + reqtags = device_queue_depth(np, sdev->id, sdev->lun); if (reqtags > tp->usrtags) reqtags = tp->usrtags; - if (!device->tagged_supported) + if (!sdev->tagged_supported) reqtags = 0; #if 1 /* Avoid to locally queue commands for no good reasons */ if (reqtags > SYM_CONF_MAX_TAG) @@ -1050,19 +1041,30 @@ static int sym53c8xx_slave_configure(struct scsi_device *device) #else depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2); #endif - scsi_adjust_queue_depth(device, - (device->tagged_supported ? + scsi_adjust_queue_depth(sdev, + (sdev->tagged_supported ? MSG_SIMPLE_TAG : 0), depth_to_use); lp->s.scdev_depth = depth_to_use; - sym_tune_dev_queuing(tp, device->lun, reqtags); + sym_tune_dev_queuing(tp, sdev->lun, reqtags); - if (!spi_initial_dv(device->sdev_target)) - spi_dv_device(device); + if (!spi_initial_dv(sdev->sdev_target)) + spi_dv_device(sdev); return 0; } +static void sym53c8xx_slave_destroy(struct scsi_device *sdev) +{ + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun); + + if (lp->itlq_tbl) + sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL"); + kfree(lp->cb_tags); + sym_mfree_dma(lp, sizeof(*lp), "LCB"); +} + /* * Linux entry point for info() function */ @@ -1926,6 +1928,7 @@ static struct scsi_host_template sym2_template = { .queuecommand = sym53c8xx_queue_command, .slave_alloc = sym53c8xx_slave_alloc, .slave_configure = sym53c8xx_slave_configure, + .slave_destroy = sym53c8xx_slave_destroy, .eh_abort_handler = sym53c8xx_eh_abort_handler, .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler, .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 113e3b35716..bec644850d3 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1523,7 +1523,7 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp /* * Insert a job into the start queue. */ -void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) +static void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) { u_short qidx; @@ -4664,30 +4664,7 @@ struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char t goto out; cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); -#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING - /* - * If the LCB is not yet available and the LUN - * has been probed ok, try to allocate the LCB. - */ - if (!lp && sym_is_bit(tp->lun_map, ln)) { - lp = sym_alloc_lcb(np, tn, ln); - if (!lp) - goto out_free; - } -#endif - - /* - * If the LCB is not available here, then the - * logical unit is not yet discovered. For those - * ones only accept 1 SCSI IO per logical unit, - * since we cannot allow disconnections. - */ - if (!lp) { - if (!sym_is_bit(tp->busy0_map, ln)) - sym_set_bit(tp->busy0_map, ln); - else - goto out_free; - } else { + { /* * If we have been asked for a tagged command. */ @@ -4840,12 +4817,6 @@ void sym_free_ccb (struct sym_hcb *np, struct sym_ccb *cp) lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun)); } - /* - * Otherwise, we only accept 1 IO per LUN. - * Clear the bit that keeps track of this IO. - */ - else - sym_clr_bit(tp->busy0_map, cp->lun); /* * We donnot queue more than 1 ccb per target @@ -4997,20 +4968,7 @@ static void sym_init_tcb (struct sym_hcb *np, u_char tn) struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln) { struct sym_tcb *tp = &np->target[tn]; - struct sym_lcb *lp = sym_lp(tp, ln); - - /* - * Already done, just return. - */ - if (lp) - return lp; - - /* - * Donnot allow LUN control block - * allocation for not probed LUNs. - */ - if (!sym_is_bit(tp->lun_map, ln)) - return NULL; + struct sym_lcb *lp = NULL; /* * Initialize the target control block if not yet. @@ -5082,13 +5040,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln) lp->started_max = SYM_CONF_MAX_TASK; lp->started_limit = SYM_CONF_MAX_TASK; #endif - /* - * If we are busy, count the IO. - */ - if (sym_is_bit(tp->busy0_map, ln)) { - lp->busy_itl = 1; - sym_clr_bit(tp->busy0_map, ln); - } + fail: return lp; } @@ -5102,12 +5054,6 @@ static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln) struct sym_lcb *lp = sym_lp(tp, ln); int i; - /* - * If LCB not available, try to allocate it. - */ - if (!lp && !(lp = sym_alloc_lcb(np, tn, ln))) - goto fail; - /* * Allocate the task table and and the tag allocation * circular buffer. We want both or none. @@ -5481,8 +5427,7 @@ finish: /* * Donnot start more than 1 command after an error. */ - if (lp) - sym_start_next_ccbs(np, lp, 1); + sym_start_next_ccbs(np, lp, 1); #endif } @@ -5520,12 +5465,6 @@ void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp) tp = &np->target[cp->target]; lp = sym_lp(tp, cp->lun); - /* - * Assume device discovered on first success. - */ - if (!lp) - sym_set_bit(tp->lun_map, cp->lun); - /* * If all data have been transferred, given than no * extended error did occur, there is no residual. @@ -5578,7 +5517,7 @@ if (resid) /* * Requeue a couple of awaiting scsi commands. */ - if (lp && !sym_que_empty(&lp->waiting_ccbq)) + if (!sym_que_empty(&lp->waiting_ccbq)) sym_start_next_ccbs(np, lp, 2); #endif /* @@ -5821,8 +5760,7 @@ void sym_hcb_free(struct sym_hcb *np) SYM_QUEHEAD *qp; struct sym_ccb *cp; struct sym_tcb *tp; - struct sym_lcb *lp; - int target, lun; + int target; if (np->scriptz0) sym_mfree_dma(np->scriptz0, np->scriptz_sz, "SCRIPTZ0"); @@ -5848,16 +5786,6 @@ void sym_hcb_free(struct sym_hcb *np) for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) { tp = &np->target[target]; - for (lun = 0 ; lun < SYM_CONF_MAX_LUN ; lun++) { - lp = sym_lp(tp, lun); - if (!lp) - continue; - if (lp->itlq_tbl) - sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, - "ITLQ_TBL"); - kfree(lp->cb_tags); - sym_mfree_dma(lp, sizeof(*lp), "LCB"); - } #if SYM_CONF_MAX_LUN > 1 kfree(tp->lunmp); #endif diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 3a264a40821..756008812aa 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -416,19 +416,6 @@ struct sym_tcb { struct sym_lcb **lunmp; /* Other LCBs [1..MAX_LUN] */ #endif - /* - * Bitmap that tells about LUNs that succeeded at least - * 1 IO and therefore assumed to be a real device. - * Avoid useless allocation of the LCB structure. - */ - u32 lun_map[(SYM_CONF_MAX_LUN+31)/32]; - - /* - * Bitmap that tells about LUNs that haven't yet an LCB - * allocated (not discovered or LCB allocation failed). - */ - u32 busy0_map[(SYM_CONF_MAX_LUN+31)/32]; - #ifdef SYM_HAVE_STCB /* * O/S specific data structure. @@ -1077,7 +1064,6 @@ char *sym_driver_name(void); void sym_print_xerr(struct scsi_cmnd *cmd, int x_status); int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int); struct sym_chip *sym_lookup_chip_table(u_short device_id, u_char revision); -void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp); #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn); #endif -- cgit v1.2.3-70-g09d2 From 44f30b0f59d628eb6f57cfa9d8ab06da670e5306 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:33 -0500 Subject: [SCSI] sym2: Remove code to handle DMA_BIDIRECTION requests The upper layer doesn't send these down since 2.4.x (or 2.6 in practice), so no need to handle it. Inline sym_setup_data_pointers into its only caller so we can fail gracefully in the case we'd get one neverless. Signed-off-by: Christoph Hellwig Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_fw.c | 6 --- drivers/scsi/sym53c8xx_2/sym_fw.h | 6 --- drivers/scsi/sym53c8xx_2/sym_fw1.h | 48 --------------------- drivers/scsi/sym53c8xx_2/sym_fw2.h | 52 ----------------------- drivers/scsi/sym53c8xx_2/sym_glue.c | 39 +++++++++++++++-- drivers/scsi/sym53c8xx_2/sym_glue.h | 1 - drivers/scsi/sym53c8xx_2/sym_hipd.c | 8 ++-- drivers/scsi/sym53c8xx_2/sym_hipd.h | 84 ------------------------------------- 8 files changed, 40 insertions(+), 204 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.c b/drivers/scsi/sym53c8xx_2/sym_fw.c index a7528a8331b..9916a2a2255 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.c +++ b/drivers/scsi/sym53c8xx_2/sym_fw.c @@ -62,9 +62,6 @@ static struct sym_fwa_ofs sym_fw1a_ofs = { }; static struct sym_fwb_ofs sym_fw1b_ofs = { SYM_GEN_FW_B(struct SYM_FWB_SCR) -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - SYM_GEN_B(struct SYM_FWB_SCR, data_io) -#endif }; static struct sym_fwz_ofs sym_fw1z_ofs = { SYM_GEN_FW_Z(struct SYM_FWZ_SCR) @@ -86,9 +83,6 @@ static struct sym_fwa_ofs sym_fw2a_ofs = { }; static struct sym_fwb_ofs sym_fw2b_ofs = { SYM_GEN_FW_B(struct SYM_FWB_SCR) -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - SYM_GEN_B(struct SYM_FWB_SCR, data_io) -#endif SYM_GEN_B(struct SYM_FWB_SCR, start64) SYM_GEN_B(struct SYM_FWB_SCR, pm_handle) }; diff --git a/drivers/scsi/sym53c8xx_2/sym_fw.h b/drivers/scsi/sym53c8xx_2/sym_fw.h index 43f6810a404..66ec35beab5 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw.h @@ -92,9 +92,6 @@ struct sym_fwa_ofs { }; struct sym_fwb_ofs { SYM_GEN_FW_B(u_short) -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - SYM_GEN_B(u_short, data_io) -#endif SYM_GEN_B(u_short, start64) SYM_GEN_B(u_short, pm_handle) }; @@ -111,9 +108,6 @@ struct sym_fwa_ba { }; struct sym_fwb_ba { SYM_GEN_FW_B(u32) -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - SYM_GEN_B(u32, data_io) -#endif SYM_GEN_B(u32, start64); SYM_GEN_B(u32, pm_handle); }; diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h index cdd92d82f4b..7b39f4a35e9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw1.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h @@ -197,12 +197,6 @@ struct SYM_FWB_SCR { u32 bad_status [ 7]; u32 wsr_ma_helper [ 4]; -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - /* Unknown direction handling */ - u32 data_io [ 2]; - u32 data_io_com [ 8]; - u32 data_io_out [ 7]; -#endif /* Data area */ u32 zero [ 1]; u32 scratch [ 1]; @@ -1747,48 +1741,6 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = { SCR_JUMP, PADDR_A (dispatch), -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN -}/*-------------------------< DATA_IO >--------------------------*/,{ - /* - * We jump here if the data direction was unknown at the - * time we had to queue the command to the scripts processor. - * Pointers had been set as follow in this situation: - * savep --> DATA_IO - * lastp --> start pointer when DATA_IN - * wlastp --> start pointer when DATA_OUT - * This script sets savep and lastp according to the - * direction chosen by the target. - */ - SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_OUT)), - PADDR_B (data_io_out), -}/*-------------------------< DATA_IO_COM >----------------------*/,{ - /* - * Direction is DATA IN. - */ - SCR_COPY (4), - HADDR_1 (ccb_head.lastp), - HADDR_1 (ccb_head.savep), - /* - * Jump to the SCRIPTS according to actual direction. - */ - SCR_COPY (4), - HADDR_1 (ccb_head.savep), - RADDR_1 (temp), - SCR_RETURN, - 0, -}/*-------------------------< DATA_IO_OUT >----------------------*/,{ - /* - * Direction is DATA OUT. - */ - SCR_REG_REG (HF_REG, SCR_AND, (~HF_DATA_IN)), - 0, - SCR_COPY (4), - HADDR_1 (ccb_head.wlastp), - HADDR_1 (ccb_head.lastp), - SCR_JUMP, - PADDR_B(data_io_com), -#endif /* SYM_OPT_HANDLE_DIR_UNKNOWN */ - }/*-------------------------< ZERO >-----------------------------*/,{ SCR_DATA_ZERO, }/*-------------------------< SCRATCH >--------------------------*/,{ diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h index 7ea7151f5d1..851f2706f22 100644 --- a/drivers/scsi/sym53c8xx_2/sym_fw2.h +++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h @@ -191,13 +191,6 @@ struct SYM_FWB_SCR { u32 pm_wsr_handle [ 38]; u32 wsr_ma_helper [ 4]; -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - /* Unknown direction handling */ - u32 data_io [ 2]; - u32 data_io_in [ 2]; - u32 data_io_com [ 6]; - u32 data_io_out [ 8]; -#endif /* Data area */ u32 zero [ 1]; u32 scratch [ 1]; @@ -1838,51 +1831,6 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = { SCR_JUMP, PADDR_A (dispatch), -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN -}/*-------------------------< DATA_IO >--------------------------*/,{ - /* - * We jump here if the data direction was unknown at the - * time we had to queue the command to the scripts processor. - * Pointers had been set as follow in this situation: - * savep --> DATA_IO - * lastp --> start pointer when DATA_IN - * wlastp --> start pointer when DATA_OUT - * This script sets savep and lastp according to the - * direction chosen by the target. - */ - SCR_JUMP ^ IFTRUE (WHEN (SCR_DATA_OUT)), - PADDR_B (data_io_out), -}/*-------------------------< DATA_IO_IN >-----------------------*/,{ - /* - * Direction is DATA IN. - */ - SCR_LOAD_REL (scratcha, 4), - offsetof (struct sym_ccb, phys.head.lastp), -}/*-------------------------< DATA_IO_COM >----------------------*/,{ - SCR_STORE_REL (scratcha, 4), - offsetof (struct sym_ccb, phys.head.savep), - - /* - * Jump to the SCRIPTS according to actual direction. - */ - SCR_LOAD_REL (temp, 4), - offsetof (struct sym_ccb, phys.head.savep), - SCR_RETURN, - 0, -}/*-------------------------< DATA_IO_OUT >----------------------*/,{ - /* - * Direction is DATA OUT. - */ - SCR_REG_REG (HF_REG, SCR_AND, (~HF_DATA_IN)), - 0, - SCR_LOAD_REL (scratcha, 4), - offsetof (struct sym_ccb, phys.head.wlastp), - SCR_STORE_REL (scratcha, 4), - offsetof (struct sym_ccb, phys.head.lastp), - SCR_JUMP, - PADDR_B(data_io_com), -#endif /* SYM_OPT_HANDLE_DIR_UNKNOWN */ - }/*-------------------------< ZERO >-----------------------------*/,{ SCR_DATA_ZERO, }/*-------------------------< SCRATCH >--------------------------*/,{ diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index a2bfdf8417a..d924997db48 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -514,9 +514,10 @@ static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struc */ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp) { - int dir; struct sym_tcb *tp = &np->target[cp->target]; struct sym_lcb *lp = sym_lp(tp, cp->lun); + u32 lastp, goalp; + int dir; /* * Build the CDB. @@ -534,15 +535,47 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s sym_set_cam_status(cmd, DID_ERROR); goto out_abort; } + + /* + * No segments means no data. + */ + if (!cp->segments) + dir = DMA_NONE; } else { cp->data_len = 0; cp->segments = 0; } /* - * Set data pointers. + * Set the data pointer. + */ + switch (dir) { + case DMA_BIDIRECTIONAL: + printk("%s: got DMA_BIDIRECTIONAL command", sym_name(np)); + sym_set_cam_status(cmd, DID_ERROR); + goto out_abort; + case DMA_TO_DEVICE: + goalp = SCRIPTA_BA(np, data_out2) + 8; + lastp = goalp - 8 - (cp->segments * (2*4)); + break; + case DMA_FROM_DEVICE: + cp->host_flags |= HF_DATA_IN; + goalp = SCRIPTA_BA(np, data_in2) + 8; + lastp = goalp - 8 - (cp->segments * (2*4)); + break; + case DMA_NONE: + default: + lastp = goalp = SCRIPTB_BA(np, no_data); + break; + } + + /* + * Set all pointers values needed by SCRIPTS. */ - sym_setup_data_pointers(np, cp, dir); + cp->phys.head.lastp = cpu_to_scr(lastp); + cp->phys.head.savep = cpu_to_scr(lastp); + cp->startp = cp->phys.head.savep; + cp->goalp = cpu_to_scr(goalp); /* * When `#ifed 1', the code below makes the driver diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h index c61c23fcce5..cc92d0c70cd 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.h +++ b/drivers/scsi/sym53c8xx_2/sym_glue.h @@ -68,7 +68,6 @@ */ #define SYM_CONF_TIMER_INTERVAL ((HZ+1)/2) -#define SYM_OPT_HANDLE_DIR_UNKNOWN #define SYM_OPT_HANDLE_DEVICE_QUEUEING #define SYM_OPT_LIMIT_COMMAND_REORDERING diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index bec644850d3..b4f0d9a4a55 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -3654,7 +3654,7 @@ static int sym_evaluate_dp(struct sym_hcb *np, struct sym_ccb *cp, u32 scr, int * If result is dp_sg = SYM_CONF_MAX_SG, then we are at the * end of the data. */ - tmp = scr_to_cpu(sym_goalp(cp)); + tmp = scr_to_cpu(cp->goalp); dp_sg = SYM_CONF_MAX_SG; if (dp_scr != tmp) dp_sg -= (tmp - 8 - (int)dp_scr) / (2*4); @@ -3761,7 +3761,7 @@ static void sym_modify_dp(struct sym_hcb *np, struct sym_tcb *tp, struct sym_ccb * And our alchemy:) allows to easily calculate the data * script address we want to return for the next data phase. */ - dp_ret = cpu_to_scr(sym_goalp(cp)); + dp_ret = cpu_to_scr(cp->goalp); dp_ret = dp_ret - 8 - (SYM_CONF_MAX_SG - dp_sg) * (2*4); /* @@ -3857,7 +3857,7 @@ int sym_compute_residual(struct sym_hcb *np, struct sym_ccb *cp) * If all data has been transferred, * there is no residual. */ - if (cp->phys.head.lastp == sym_goalp(cp)) + if (cp->phys.head.lastp == cp->goalp) return resid; /* @@ -5470,7 +5470,7 @@ void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp) * extended error did occur, there is no residual. */ resid = 0; - if (cp->phys.head.lastp != sym_goalp(cp)) + if (cp->phys.head.lastp != cp->goalp) resid = sym_compute_residual(np, cp); /* diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 756008812aa..17181101f6c 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -48,12 +48,6 @@ * They may be defined in platform specific headers, if they * are useful. * - * SYM_OPT_HANDLE_DIR_UNKNOWN - * When this option is set, the SCRIPTS used by the driver - * are able to handle SCSI transfers with direction not - * supplied by user. - * (set for Linux-2.0.X) - * * SYM_OPT_HANDLE_DEVICE_QUEUEING * When this option is set, the driver will use a queue per * device and handle QUEUE FULL status requeuing internally. @@ -64,7 +58,6 @@ * (set for Linux) */ #if 0 -#define SYM_OPT_HANDLE_DIR_UNKNOWN #define SYM_OPT_HANDLE_DEVICE_QUEUEING #define SYM_OPT_LIMIT_COMMAND_REORDERING #endif @@ -659,9 +652,6 @@ struct sym_ccbh { */ u32 savep; /* Jump address to saved data pointer */ u32 lastp; /* SCRIPTS address at end of data */ -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - u32 wlastp; -#endif /* * Status fields. @@ -791,9 +781,6 @@ struct sym_ccb { SYM_QUEHEAD link_ccbq; /* Link to free/busy CCB queue */ u32 startp; /* Initial data pointer */ u32 goalp; /* Expected last data pointer */ -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - u32 wgoalp; -#endif int ext_sg; /* Extreme data pointer, used */ int ext_ofs; /* to calculate the residual. */ #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING @@ -808,12 +795,6 @@ struct sym_ccb { #define CCB_BA(cp,lbl) cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl)) -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN -#define sym_goalp(cp) ((cp->host_flags & HF_DATA_IN) ? cp->goalp : cp->wgoalp) -#else -#define sym_goalp(cp) (cp->goalp) -#endif - typedef struct device *m_pool_ident_t; /* @@ -1121,71 +1102,6 @@ bad: #error "Unsupported DMA addressing mode" #endif -/* - * Set up data pointers used by SCRIPTS. - * Called from O/S specific code. - */ -static inline void sym_setup_data_pointers(struct sym_hcb *np, - struct sym_ccb *cp, int dir) -{ - u32 lastp, goalp; - - /* - * No segments means no data. - */ - if (!cp->segments) - dir = DMA_NONE; - - /* - * Set the data pointer. - */ - switch(dir) { -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - case DMA_BIDIRECTIONAL: -#endif - case DMA_TO_DEVICE: - goalp = SCRIPTA_BA(np, data_out2) + 8; - lastp = goalp - 8 - (cp->segments * (2*4)); -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - cp->wgoalp = cpu_to_scr(goalp); - if (dir != DMA_BIDIRECTIONAL) - break; - cp->phys.head.wlastp = cpu_to_scr(lastp); - /* fall through */ -#else - break; -#endif - case DMA_FROM_DEVICE: - cp->host_flags |= HF_DATA_IN; - goalp = SCRIPTA_BA(np, data_in2) + 8; - lastp = goalp - 8 - (cp->segments * (2*4)); - break; - case DMA_NONE: - default: -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - cp->host_flags |= HF_DATA_IN; -#endif - lastp = goalp = SCRIPTB_BA(np, no_data); - break; - } - - /* - * Set all pointers values needed by SCRIPTS. - */ - cp->phys.head.lastp = cpu_to_scr(lastp); - cp->phys.head.savep = cpu_to_scr(lastp); - cp->startp = cp->phys.head.savep; - cp->goalp = cpu_to_scr(goalp); - -#ifdef SYM_OPT_HANDLE_DIR_UNKNOWN - /* - * If direction is unknown, start at data_io. - */ - if (dir == DMA_BIDIRECTIONAL) - cp->phys.head.savep = cpu_to_scr(SCRIPTB_BA(np, data_io)); -#endif -} - /* * MEMORY ALLOCATOR. */ -- cgit v1.2.3-70-g09d2 From 1e8eb21ea7b5c318d881eab878f3e545e55fa273 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:36 -0500 Subject: [SCSI] sym2: Use DMA_40BIT_MASK constant Now that this constant has been added to dma-mapping.h, we don't need our own definition Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index d924997db48..bb90ef9659a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1532,7 +1532,7 @@ static int sym_setup_bus_dma_mask(struct sym_hcb *np) { #if SYM_CONF_DMA_ADDRESSING_MODE > 0 #if SYM_CONF_DMA_ADDRESSING_MODE == 1 -#define DMA_DAC_MASK 0x000000ffffffffffULL /* 40-bit */ +#define DMA_DAC_MASK DMA_40BIT_MASK #elif SYM_CONF_DMA_ADDRESSING_MODE == 2 #define DMA_DAC_MASK DMA_64BIT_MASK #endif -- cgit v1.2.3-70-g09d2 From 33333bacf523bb4bb903058fec6041a5952c93c6 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:42 -0500 Subject: [SCSI] sym2: Use scsi_print_msg sym_show_msg was almost a duplicate of scsi_print_msg, except not as featureful. So use the common code instead. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_hipd.c | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index b4f0d9a4a55..c36e43bbaae 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -40,6 +40,7 @@ #include #include /* for timeouts in units of HZ */ +#include #include "sym_glue.h" #include "sym_nvram.h" @@ -70,32 +71,12 @@ static void sym_printl_hex(u_char *p, int n) printf (".\n"); } -/* - * Print out the content of a SCSI message. - */ -static int sym_show_msg (u_char * msg) -{ - u_char i; - printf ("%x",*msg); - if (*msg==M_EXTENDED) { - for (i=1;i<8;i++) { - if (i-1>msg[1]) break; - printf ("-%x",msg[i]); - } - return (i+1); - } else if ((*msg & 0xf0) == 0x20) { - printf ("-%x",msg[1]); - return (2); - } - return (1); -} - static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg) { sym_print_addr(cp->cmd, "%s: ", label); - sym_show_msg(msg); - printf(".\n"); + scsi_print_msg(msg); + printf("\n"); } static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_char *msg) @@ -103,8 +84,8 @@ static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_ch struct sym_tcb *tp = &np->target[target]; dev_info(&tp->starget->dev, "%s: ", label); - sym_show_msg(msg); - printf(".\n"); + scsi_print_msg(msg); + printf("\n"); } /* -- cgit v1.2.3-70-g09d2 From b37df48923b76155de2a728e1155ed263dba5f53 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:44 -0500 Subject: [SCSI] sym2: Allow NVRAM settings to limit speed and width The NVRAM for both Tekram and Symbios boards allows the user to set the speed and width for individual targets. I took that code out in March 2004 when we introduced Domain Validation, but it seems there's still a legitimate need for it in some configurations. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 3 +++ drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 +- drivers/scsi/sym53c8xx_2/sym_hipd.h | 6 ++++-- drivers/scsi/sym53c8xx_2/sym_nvram.c | 29 ++++++++++++++++------------- drivers/scsi/sym53c8xx_2/sym_nvram.h | 4 ++-- 5 files changed, 26 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index bb90ef9659a..cb3d195bdb9 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1038,6 +1038,9 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) return -ENOMEM; tp->starget = sdev->sdev_target; + spi_min_period(tp->starget) = tp->usr_period; + spi_max_width(tp->starget) = tp->usr_width; + return 0; } diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index c36e43bbaae..0b0cba0d0bb 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -943,7 +943,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); tp->usrtags = SYM_SETUP_MAX_TAG; - sym_nvram_setup_target(np, i, nvram); + sym_nvram_setup_target(tp, i, nvram); if (!tp->usrtags) tp->usrflags &= ~SYM_TAGS_ENABLED; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 17181101f6c..2456090bb24 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -434,8 +434,10 @@ struct sym_tcb { * Other user settable limits and options. * These limits are read from the NVRAM if present. */ - u_char usrflags; - u_short usrtags; + unsigned char usrflags; + unsigned char usr_period; + unsigned char usr_width; + unsigned short usrtags; struct scsi_target *starget; }; diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.c b/drivers/scsi/sym53c8xx_2/sym_nvram.c index 994b7566bca..15d69298ab6 100644 --- a/drivers/scsi/sym53c8xx_2/sym_nvram.c +++ b/drivers/scsi/sym53c8xx_2/sym_nvram.c @@ -92,29 +92,32 @@ void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sy * Get target set-up from Symbios format NVRAM. */ static void -sym_Symbios_setup_target(struct sym_hcb *np, int target, Symbios_nvram *nvram) +sym_Symbios_setup_target(struct sym_tcb *tp, int target, Symbios_nvram *nvram) { - struct sym_tcb *tp = &np->target[target]; Symbios_target *tn = &nvram->target[target]; - tp->usrtags = - (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? SYM_SETUP_MAX_TAG : 0; - + if (!(tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)) + tp->usrtags = 0; if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE)) tp->usrflags &= ~SYM_DISC_ENABLED; if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME)) tp->usrflags |= SYM_SCAN_BOOT_DISABLED; if (!(tn->flags & SYMBIOS_SCAN_LUNS)) tp->usrflags |= SYM_SCAN_LUNS_DISABLED; + tp->usr_period = (tn->sync_period + 3) / 4; + tp->usr_width = (tn->bus_width == 0x8) ? 0 : 1; } +static const unsigned char Tekram_sync[16] = { + 25, 31, 37, 43, 50, 62, 75, 125, 12, 15, 18, 21, 6, 7, 9, 10 +}; + /* * Get target set-up from Tekram format NVRAM. */ static void -sym_Tekram_setup_target(struct sym_hcb *np, int target, Tekram_nvram *nvram) +sym_Tekram_setup_target(struct sym_tcb *tp, int target, Tekram_nvram *nvram) { - struct sym_tcb *tp = &np->target[target]; struct Tekram_target *tn = &nvram->target[target]; if (tn->flags & TEKRAM_TAGGED_COMMANDS) { @@ -124,22 +127,22 @@ sym_Tekram_setup_target(struct sym_hcb *np, int target, Tekram_nvram *nvram) if (tn->flags & TEKRAM_DISCONNECT_ENABLE) tp->usrflags |= SYM_DISC_ENABLED; - /* If any device does not support parity, we will not use this option */ - if (!(tn->flags & TEKRAM_PARITY_CHECK)) - np->rv_scntl0 &= ~0x0a; /* SCSI parity checking disabled */ + if (tn->flags & TEKRAM_SYNC_NEGO) + tp->usr_period = Tekram_sync[tn->sync_index & 0xf]; + tp->usr_width = (tn->flags & TEKRAM_WIDE_NEGO) ? 1 : 0; } /* * Get target setup from NVRAM. */ -void sym_nvram_setup_target(struct sym_hcb *np, int target, struct sym_nvram *nvp) +void sym_nvram_setup_target(struct sym_tcb *tp, int target, struct sym_nvram *nvp) { switch (nvp->type) { case SYM_SYMBIOS_NVRAM: - sym_Symbios_setup_target(np, target, &nvp->data.Symbios); + sym_Symbios_setup_target(tp, target, &nvp->data.Symbios); break; case SYM_TEKRAM_NVRAM: - sym_Tekram_setup_target(np, target, &nvp->data.Tekram); + sym_Tekram_setup_target(tp, target, &nvp->data.Tekram); break; default: break; diff --git a/drivers/scsi/sym53c8xx_2/sym_nvram.h b/drivers/scsi/sym53c8xx_2/sym_nvram.h index 1538bede527..bdfbbb083b6 100644 --- a/drivers/scsi/sym53c8xx_2/sym_nvram.h +++ b/drivers/scsi/sym53c8xx_2/sym_nvram.h @@ -194,12 +194,12 @@ struct sym_nvram { #if SYM_CONF_NVRAM_SUPPORT void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram); -void sym_nvram_setup_target (struct sym_hcb *np, int target, struct sym_nvram *nvp); +void sym_nvram_setup_target (struct sym_tcb *tp, int target, struct sym_nvram *nvp); int sym_read_nvram (struct sym_device *np, struct sym_nvram *nvp); char *sym_nvram_type(struct sym_nvram *nvp); #else static inline void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram) { } -static inline void sym_nvram_setup_target(struct sym_hcb *np, struct sym_nvram *nvram) { } +static inline void sym_nvram_setup_target(struct sym_tcb *tp, struct sym_nvram *nvram) { } static inline int sym_read_nvram(struct sym_device *np, struct sym_nvram *nvp) { nvp->type = 0; -- cgit v1.2.3-70-g09d2 From 66e8d1cc64e95be78e6138cc88635f7e3108ef58 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:46 -0500 Subject: [SCSI] sym2: Report disabled devices and LUNs more attractively Rather than print a list of targets at driver init time, print each disabled target as we attempt to scan it. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 14 +++++++++++--- drivers/scsi/sym53c8xx_2/sym_hipd.c | 30 ------------------------------ 2 files changed, 11 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index cb3d195bdb9..1fffd2b3c65 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1018,6 +1018,7 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN) return -ENXIO; + tp->starget = sdev->sdev_target; /* * Fail the device init if the device is flagged NOSCAN at BOOT in * the NVRAM. This may speed up boot and maintain coherency with @@ -1027,17 +1028,24 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) * lun devices behave badly when asked for a non zero LUN. */ - if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) || - ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && sdev->lun != 0)) { + if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) { tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; + starget_printk(KERN_INFO, tp->starget, + "Scan at boot disabled in NVRAM\n"); return -ENXIO; } + if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) { + if (sdev->lun != 0) + return -ENXIO; + starget_printk(KERN_INFO, tp->starget, + "Multiple LUNs disabled in NVRAM\n"); + } + lp = sym_alloc_lcb(np, sdev->id, sdev->lun); if (!lp) return -ENOMEM; - tp->starget = sdev->sdev_target; spi_min_period(tp->starget) = tp->usr_period; spi_max_width(tp->starget) = tp->usr_width; diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 0b0cba0d0bb..7a3c807dcfc 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -616,29 +616,6 @@ static __inline void sym_init_burst(struct sym_hcb *np, u_char bc) } } - -/* - * Print out the list of targets that have some flag disabled by user. - */ -static void sym_print_targets_flag(struct sym_hcb *np, int mask, char *msg) -{ - int cnt; - int i; - - for (cnt = 0, i = 0 ; i < SYM_CONF_MAX_TARGET ; i++) { - if (i == np->myaddr) - continue; - if (np->target[i].usrflags & mask) { - if (!cnt++) - printf("%s: %s disabled for targets", - sym_name(np), msg); - printf(" %d", i); - } - } - if (cnt) - printf(".\n"); -} - /* * Save initial settings of some IO registers. * Assumed to have been set by BIOS. @@ -986,13 +963,6 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru sym_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl, np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); } - /* - * Let user be aware of targets that have some disable flags set. - */ - sym_print_targets_flag(np, SYM_SCAN_BOOT_DISABLED, "SCAN AT BOOT"); - if (sym_verbose) - sym_print_targets_flag(np, SYM_SCAN_LUNS_DISABLED, - "SCAN FOR LUNS"); return 0; } -- cgit v1.2.3-70-g09d2 From ad94c9340a76db187166f2342ba0ff568dc7801f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 29 Nov 2005 23:08:48 -0500 Subject: [SCSI] sym2: Version 2.2.2 Update version number to 2.2.2 Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_defs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_defs.h b/drivers/scsi/sym53c8xx_2/sym_defs.h index 2d9437d7242..3659dd7b9d7 100644 --- a/drivers/scsi/sym53c8xx_2/sym_defs.h +++ b/drivers/scsi/sym53c8xx_2/sym_defs.h @@ -40,7 +40,7 @@ #ifndef SYM_DEFS_H #define SYM_DEFS_H -#define SYM_VERSION "2.2.1" +#define SYM_VERSION "2.2.2" #define SYM_DRIVER_NAME "sym-" SYM_VERSION /* -- cgit v1.2.3-70-g09d2 From 0d2f16559a9015c4daa8babfc443bf2b8740fbd9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:12:46 -0600 Subject: [SCSI] iscsi: opcode check fix Must check only valid opcode bits. Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 4fea3e4edaa..0769e948219 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -584,7 +584,7 @@ iscsi_hdr_recv(struct iscsi_conn *conn) } /* save opcode for later */ - conn->in.opcode = hdr->opcode; + conn->in.opcode = hdr->opcode & ISCSI_OPCODE_MASK; /* verify itt (itt encoding: age+cid+itt) */ if (hdr->itt != cpu_to_be32(ISCSI_RESERVED_TAG)) { -- cgit v1.2.3-70-g09d2 From e6273993dbcb8d805dd868e2128c3503a3bb1964 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:12:49 -0600 Subject: [SCSI] iscsi: redirect fix From tomof@acm.org: There is one more issue about Equallogic systems. They send re-direction info with FIN. I think that the kernel module needs to let iscsid to read data from the socket before killing it. Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 0769e948219..f12d605c772 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1237,8 +1237,9 @@ iscsi_tcp_state_change(struct sock *sk) conn = (struct iscsi_conn*)sk->sk_user_data; session = conn->session; - if (sk->sk_state == TCP_CLOSE_WAIT || - sk->sk_state == TCP_CLOSE) { + if ((sk->sk_state == TCP_CLOSE_WAIT || + sk->sk_state == TCP_CLOSE) && + !atomic_read(&sk->sk_rmem_alloc)) { debug_tcp("iscsi_tcp_state_change: TCP_CLOSE|TCP_CLOSE_WAIT\n"); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); } -- cgit v1.2.3-70-g09d2 From 733bb6a70cb351786f3c2290ab22f71b612e6893 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:12:54 -0600 Subject: [SCSI] iscsi: iscsi response fix from Wang Zhenyu: Must check SCSI CMD and R2T response according to the spec Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index f12d605c772..e6991515ad2 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -642,9 +642,7 @@ iscsi_hdr_recv(struct iscsi_conn *conn) switch(conn->in.opcode) { case ISCSI_OP_SCSI_CMD_RSP: BUG_ON((void*)ctask != ctask->sc->SCp.ptr); - if (ctask->hdr.flags & ISCSI_FLAG_CMD_WRITE) - rc = iscsi_cmd_rsp(conn, ctask); - else if (!conn->in.datalen) + if (!conn->in.datalen) rc = iscsi_cmd_rsp(conn, ctask); else /* @@ -666,8 +664,7 @@ iscsi_hdr_recv(struct iscsi_conn *conn) break; case ISCSI_OP_R2T: BUG_ON((void*)ctask != ctask->sc->SCp.ptr); - if (ctask->hdr.flags & ISCSI_FLAG_CMD_WRITE && - ctask->sc->sc_data_direction == DMA_TO_DEVICE) + if (ctask->sc->sc_data_direction == DMA_TO_DEVICE) rc = iscsi_r2t_rsp(conn, ctask); else rc = ISCSI_ERR_PROTO; -- cgit v1.2.3-70-g09d2 From f6cfba1d21e9e4afd80e2274aa4df3dc1bd0aab7 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:12:57 -0600 Subject: [SCSI] iscsi: data digest calculation fix From Wang Zhenyu: data digest fix (the bug caused data corruption w/Wasabi StorageBuilder target) Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 65 +++++++++++++++++++++++++++++------------------- 1 file changed, 40 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index e6991515ad2..83e2f8c8e49 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -903,11 +903,20 @@ partial_sg_digest_update(struct iscsi_conn *conn, struct scatterlist *sg, crypto_digest_update(conn->data_rx_tfm, &temp, 1); } +static void +iscsi_recv_digest_update(struct iscsi_conn *conn, char* buf, int len) +{ + struct scatterlist tmp; + + sg_init_one(&tmp, buf, len); + crypto_digest_update(conn->data_rx_tfm, &tmp, 1); +} + static int iscsi_scsi_data_in(struct iscsi_conn *conn) { struct iscsi_cmd_task *ctask = conn->in.ctask; struct scsi_cmnd *sc = ctask->sc; - struct scatterlist tmp, *sg; + struct scatterlist *sg; int i, offset, rc = 0; BUG_ON((void*)ctask != sc->SCp.ptr); @@ -921,10 +930,8 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn) sc->request_bufflen, ctask->data_offset); if (rc == -EAGAIN) return rc; - if (conn->datadgst_en) { - sg_init_one(&tmp, sc->request_buffer, i); - crypto_digest_update(conn->data_rx_tfm, &tmp, 1); - } + if (conn->datadgst_en) + iscsi_recv_digest_update(conn, sc->request_buffer, i); rc = 0; goto done; } @@ -1018,6 +1025,9 @@ iscsi_data_recv(struct iscsi_conn *conn) conn->in.hdr = &conn->hdr; conn->senselen = (conn->data[0] << 8) | conn->data[1]; rc = iscsi_cmd_rsp(conn, conn->in.ctask); + if (!rc && conn->datadgst_en) + iscsi_recv_digest_update(conn, conn->data, + conn->in.datalen); } break; case ISCSI_OP_TEXT_RSP: @@ -1042,6 +1052,11 @@ iscsi_data_recv(struct iscsi_conn *conn) rc = iscsi_recv_pdu(iscsi_handle(conn), conn->in.hdr, conn->data, conn->in.datalen); + if (!rc && conn->datadgst_en && + conn->in.opcode != ISCSI_OP_LOGIN_RSP) + iscsi_recv_digest_update(conn, conn->data, + conn->in.datalen); + if (mtask && conn->login_mtask != mtask) { spin_lock(&session->lock); __kfifo_put(session->mgmtpool.queue, (void*)&mtask, @@ -1050,6 +1065,8 @@ iscsi_data_recv(struct iscsi_conn *conn) } } break; + case ISCSI_OP_ASYNC_EVENT: + case ISCSI_OP_REJECT: default: BUG_ON(1); } @@ -1112,7 +1129,7 @@ more: rc = iscsi_hdr_recv(conn); if (!rc && conn->in.datalen) { if (conn->datadgst_en && - conn->in.opcode == ISCSI_OP_SCSI_DATA_IN) { + conn->in.opcode != ISCSI_OP_LOGIN_RSP) { BUG_ON(!conn->data_rx_tfm); crypto_digest_init(conn->data_rx_tfm); } @@ -1124,26 +1141,24 @@ more: } if (conn->in_progress == IN_PROGRESS_DDIGEST_RECV) { + uint32_t recv_digest; debug_tcp("extra data_recv offset %d copy %d\n", conn->in.offset, conn->in.copy); - if (conn->in.opcode == ISCSI_OP_SCSI_DATA_IN) { - uint32_t recv_digest; - skb_copy_bits(conn->in.skb, conn->in.offset, - &recv_digest, 4); - conn->in.offset += 4; - conn->in.copy -= 4; - if (recv_digest != conn->in.datadgst) { - debug_tcp("iscsi_tcp: data digest error!" - "0x%x != 0x%x\n", recv_digest, - conn->in.datadgst); - iscsi_conn_failure(conn, ISCSI_ERR_DATA_DGST); - return 0; - } else { - debug_tcp("iscsi_tcp: data digest match!" - "0x%x == 0x%x\n", recv_digest, - conn->in.datadgst); - conn->in_progress = IN_PROGRESS_WAIT_HEADER; - } + skb_copy_bits(conn->in.skb, conn->in.offset, + &recv_digest, 4); + conn->in.offset += 4; + conn->in.copy -= 4; + if (recv_digest != conn->in.datadgst) { + debug_tcp("iscsi_tcp: data digest error!" + "0x%x != 0x%x\n", recv_digest, + conn->in.datadgst); + iscsi_conn_failure(conn, ISCSI_ERR_DATA_DGST); + return 0; + } else { + debug_tcp("iscsi_tcp: data digest match!" + "0x%x == 0x%x\n", recv_digest, + conn->in.datadgst); + conn->in_progress = IN_PROGRESS_WAIT_HEADER; } } @@ -1165,7 +1180,7 @@ more: conn->in.copy -= conn->in.padding; conn->in.offset += conn->in.padding; if (conn->datadgst_en && - conn->in.opcode == ISCSI_OP_SCSI_DATA_IN) { + conn->in.opcode != ISCSI_OP_LOGIN_RSP) { if (conn->in.padding) { debug_tcp("padding -> %d\n", conn->in.padding); memset(pad, 0, conn->in.padding); -- cgit v1.2.3-70-g09d2 From 9e3961ba2be51a88c6223143568c80e0616d93ce Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:12:59 -0600 Subject: [SCSI] iscsi: lower queue depth From Wang Zhenyu: High queue depth was a problem for some targets so make queue_depth adjustable From Mike Christie Make default queue_depth a little lower Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 20 +++++++++++++++----- drivers/scsi/iscsi_tcp.h | 3 ++- 2 files changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 83e2f8c8e49..5b14c404069 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -2401,6 +2401,15 @@ fault: return 0; } +static int +iscsi_change_queue_depth(struct scsi_device *sdev, int depth) +{ + if (depth > ISCSI_MAX_CMD_PER_LUN) + depth = ISCSI_MAX_CMD_PER_LUN; + scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth); + return sdev->queue_depth; +} + static int iscsi_pool_init(struct iscsi_queue *q, int max, void ***items, int item_size) { @@ -3260,13 +3269,14 @@ iscsi_r2tpool_free(struct iscsi_session *session) static struct scsi_host_template iscsi_sht = { .name = "iSCSI Initiator over TCP/IP, v." ISCSI_VERSION_STR, - .queuecommand = iscsi_queuecommand, + .queuecommand = iscsi_queuecommand, + .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_XMIT_CMDS_MAX - 1, .sg_tablesize = ISCSI_SG_TABLESIZE, - .cmd_per_lun = ISCSI_CMD_PER_LUN, - .eh_abort_handler = iscsi_eh_abort, - .eh_host_reset_handler = iscsi_eh_host_reset, - .use_clustering = DISABLE_CLUSTERING, + .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, + .eh_abort_handler = iscsi_eh_abort, + .eh_host_reset_handler = iscsi_eh_host_reset, + .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_tcp", .this_id = -1, }; diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index d23ae68fae0..855f2dfd18a 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -71,7 +71,8 @@ #define ISCSI_MGMT_CMDS_MAX 32 /* must be power of 2 */ #define ISCSI_MGMT_ITT_OFFSET 0xa00 #define ISCSI_SG_TABLESIZE SG_ALL -#define ISCSI_CMD_PER_LUN 128 +#define ISCSI_DEF_CMD_PER_LUN 32 +#define ISCSI_MAX_CMD_PER_LUN 128 #define ISCSI_TCP_MAX_CMD_LEN 16 #define ITT_MASK (0xfff) -- cgit v1.2.3-70-g09d2 From 4d841d6bd94d55642f8dbb11d6b672b3b50ff82e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 29 Nov 2005 23:13:01 -0600 Subject: [SCSI] iscsi: update version Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 5b14c404069..feb8731907c 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -49,7 +49,7 @@ MODULE_AUTHOR("Dmitry Yusupov , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -MODULE_VERSION("0:4.409"); +MODULE_VERSION("0:4.445"); /* #define DEBUG_TCP */ /* #define DEBUG_SCSI */ #define DEBUG_ASSERT -- cgit v1.2.3-70-g09d2 From 8a47cd340b4a299087f926ff2780d1eb08513f04 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 30 Nov 2005 02:27:19 -0600 Subject: [SCSI] iscsi: check header digests for mgmt tasks From Wang Zhenyu: check header digest for cmd and mgmt tasks Signed-off-by: Wang Zhenyu Signed-off-by: Mike Christie Signed-off-by: Alex Aizman Signed-off-by: Dmitry Yusupov Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index feb8731907c..2d12355eed3 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -581,6 +581,12 @@ iscsi_hdr_recv(struct iscsi_conn *conn) crypto_digest_digest(conn->rx_tfm, &sg, 1, (u8 *)&cdgst); rdgst = *(uint32_t*)((char*)hdr + sizeof(struct iscsi_hdr) + conn->in.ahslen); + if (cdgst != rdgst) { + printk(KERN_ERR "iscsi_tcp: itt %x: hdrdgst error " + "recv 0x%x calc 0x%x\n", conn->in.itt, rdgst, + cdgst); + return ISCSI_ERR_HDR_DGST; + } } /* save opcode for later */ @@ -610,13 +616,6 @@ iscsi_hdr_recv(struct iscsi_conn *conn) conn->in.ahslen, conn->in.datalen); if (conn->in.itt < session->cmds_max) { - if (conn->hdrdgst_en && cdgst != rdgst) { - printk(KERN_ERR "iscsi_tcp: itt %x: hdrdgst error " - "recv 0x%x calc 0x%x\n", conn->in.itt, rdgst, - cdgst); - return ISCSI_ERR_HDR_DGST; - } - ctask = (struct iscsi_cmd_task *)session->cmds[conn->in.itt]; if (!ctask->sc) { @@ -1128,8 +1127,7 @@ more: */ rc = iscsi_hdr_recv(conn); if (!rc && conn->in.datalen) { - if (conn->datadgst_en && - conn->in.opcode != ISCSI_OP_LOGIN_RSP) { + if (conn->datadgst_en) { BUG_ON(!conn->data_rx_tfm); crypto_digest_init(conn->data_rx_tfm); } @@ -1179,8 +1177,7 @@ more: } conn->in.copy -= conn->in.padding; conn->in.offset += conn->in.padding; - if (conn->datadgst_en && - conn->in.opcode != ISCSI_OP_LOGIN_RSP) { + if (conn->datadgst_en) { if (conn->in.padding) { debug_tcp("padding -> %d\n", conn->in.padding); memset(pad, 0, conn->in.padding); @@ -2875,8 +2872,11 @@ iscsi_conn_stop(iscsi_connh_t connh, int flag) * in hdr_extract() and will be re-negotiated at * set_param() time. */ - if (flag == STOP_CONN_RECOVER) + if (flag == STOP_CONN_RECOVER) { conn->hdr_size = sizeof(struct iscsi_hdr); + conn->hdrdgst_en = 0; + conn->datadgst_en = 0; + } } up(&conn->xmitsema); } -- cgit v1.2.3-70-g09d2 From 7f23e146a122966bd58e5da9c16a0e12385f09fc Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 1 Dec 2005 12:50:13 -0600 Subject: [SCSI] correct some dropped const compiler warnings Make the vendor, model and rev fields in scsi_device pointers to const and update a few prototypes of functions using them. Signed-off-by: James Bottomley --- drivers/scsi/scsi_devinfo.c | 5 +++-- drivers/scsi/scsi_priv.h | 3 ++- include/scsi/scsi_device.h | 6 +++--- 3 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index e69477d1889..f01ec0a7c50 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -354,8 +354,9 @@ static int scsi_dev_info_list_add_str(char *dev_list) * @model, if found, return the matching flags value, else return * the host or global default settings. **/ -int scsi_get_device_flags(struct scsi_device *sdev, unsigned char *vendor, - unsigned char *model) +int scsi_get_device_flags(struct scsi_device *sdev, + const unsigned char *vendor, + const unsigned char *model) { struct scsi_dev_info_list *devinfo; unsigned int bflags; diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index d632d9e1493..a8d121c8fbc 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -57,7 +57,8 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) /* scsi_devinfo.c */ extern int scsi_get_device_flags(struct scsi_device *sdev, - unsigned char *vendor, unsigned char *model); + const unsigned char *vendor, + const unsigned char *model); extern int __init scsi_init_devinfo(void); extern void scsi_exit_devinfo(void); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 85cfd88461c..063e32fe036 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -79,9 +79,9 @@ struct scsi_device { char inq_periph_qual; /* PQ from INQUIRY data */ unsigned char inquiry_len; /* valid bytes in 'inquiry' */ unsigned char * inquiry; /* INQUIRY response data */ - char * vendor; /* [back_compat] point into 'inquiry' ... */ - char * model; /* ... after scan; point to static string */ - char * rev; /* ... "nullnullnullnull" before scan */ + const char * vendor; /* [back_compat] point into 'inquiry' ... */ + const char * model; /* ... after scan; point to static string */ + const char * rev; /* ... "nullnullnullnull" before scan */ unsigned char current_tag; /* current tag */ struct scsi_target *sdev_target; /* used only for single_lun */ -- cgit v1.2.3-70-g09d2 From 0a21ef1e603096a8f57fcd7fa0b8b53e7147d3b9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 1 Dec 2005 12:51:50 -0600 Subject: [SCSI] qla2xxx: fix compile error caused by pci_dev.owner move Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 41d2aeee096..24304300d7b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2611,7 +2611,9 @@ qla2xxx_remove_one(struct pci_dev *pdev) static struct pci_driver qla2xxx_pci_driver = { .name = "qla2xxx", - .owner = THIS_MODULE, + .driver = { + .owner = THIS_MODULE, + }, .id_table = qla2xxx_pci_tbl, .probe = qla2xxx_probe_one, .remove = __devexit_p(qla2xxx_remove_one), -- cgit v1.2.3-70-g09d2 From 1de933f35b17622f977eff1630eb1f2c92e9450c Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:41:15 -0500 Subject: [SCSI] lpfc 8.1.1: Miscellaneous Cleanups Miscellaneous Cleanups: - Remove ProgType READ_REV mailbox command value check in lpfc_config_port_prep. - Convert simple printk to an lpfc_printf_log in queuecommand. - Modify lpfc_abort_handler message 0749 to display more accurate text and data. - Minor style cleanup: fix 3 long lines in lpfc_hw.h Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw.h | 9 ++++++--- drivers/scsi/lpfc/lpfc_init.c | 34 +++++++++++++--------------------- drivers/scsi/lpfc/lpfc_scsi.c | 9 +++++---- 3 files changed, 24 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 86c41981188..bf0c25fa873 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -266,9 +266,11 @@ struct lpfc_name { struct { #ifdef __BIG_ENDIAN_BITFIELD uint8_t nameType:4; /* FC Word 0, bit 28:31 */ - uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */ + uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit + 8:11 of IEEE ext */ #else /* __LITTLE_ENDIAN_BITFIELD */ - uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit 8:11 of IEEE ext */ + uint8_t IEEEextMsn:4; /* FC Word 0, bit 24:27, bit + 8:11 of IEEE ext */ uint8_t nameType:4; /* FC Word 0, bit 28:31 */ #endif @@ -278,7 +280,8 @@ struct lpfc_name { #define NAME_IP_TYPE 0x4 /* IP address */ #define NAME_CCITT_TYPE 0xC #define NAME_CCITT_GR_TYPE 0xE - uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE extended Lsb */ + uint8_t IEEEextLsb; /* FC Word 0, bit 16:23, IEEE + extended Lsb */ uint8_t IEEE[6]; /* FC IEEE address */ } s; uint8_t wwn[8]; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 07498118359..3eebe663a2e 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -126,34 +126,26 @@ lpfc_config_port_prep(struct lpfc_hba * phba) return -ERESTART; } - /* The HBA's current state is provided by the ProgType and rr fields. - * Read and check the value of these fields before continuing to config - * this port. + /* + * The value of rr must be 1 since the driver set the cv field to 1. + * This setting requires the FW to set all revision fields. */ - if (mb->un.varRdRev.rr == 0 || mb->un.varRdRev.un.b.ProgType != 2) { - /* Old firmware */ + if (mb->un.varRdRev.rr == 0) { vp->rev.rBit = 0; - lpfc_printf_log(phba, - KERN_ERR, - LOG_INIT, - "%d:0440 Adapter failed to init, mbxCmd x%x " - "READ_REV detected outdated firmware" - "Data: x%x\n", - phba->brd_no, - mb->mbxCommand, 0); + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0440 Adapter failed to init, READ_REV has " + "missing revision information.\n", + phba->brd_no); mempool_free(pmb, phba->mbox_mem_pool); return -ERESTART; - } else { - vp->rev.rBit = 1; - vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev; - memcpy(vp->rev.sli1FwName, - (char*)mb->un.varRdRev.sli1FwName, 16); - vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev; - memcpy(vp->rev.sli2FwName, - (char *)mb->un.varRdRev.sli2FwName, 16); } /* Save information as VPD data */ + vp->rev.rBit = 1; + vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev; + memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16); + vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev; + memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16); vp->rev.biuRev = mb->un.varRdRev.biuRev; vp->rev.smRev = mb->un.varRdRev.smRev; vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c63275e66e2..0aa5ca68433 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -721,8 +721,9 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) } lpfc_cmd = lpfc_sli_get_scsi_buf (phba); if (lpfc_cmd == NULL) { - printk(KERN_WARNING "%s: No buffer available - list empty, " - "total count %d\n", __FUNCTION__, phba->total_scsi_bufs); + lpfc_printf_log(phba, KERN_INFO, LOG_FCP, + "%d:0707 driver's buffer pool is empty, " + "IO busied\n", phba->brd_no); goto out_host_busy; } @@ -844,8 +845,8 @@ __lpfc_abort_handler(struct scsi_cmnd *cmnd) out: lpfc_printf_log(phba, KERN_WARNING, LOG_FCP, - "%d:0749 SCSI layer issued abort device: ret %#x, " - "ID %d, LUN %d, snum %#lx\n", + "%d:0749 SCSI Layer I/O Abort Request " + "Status x%x ID %d LUN %d snum %#lx\n", phba->brd_no, ret, cmnd->device->id, cmnd->device->lun, cmnd->serial_number); -- cgit v1.2.3-70-g09d2 From 2fb70f79936e7180e8b0287a4053b8ba89182717 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:41:24 -0500 Subject: [SCSI] lpfc 8.1.1 : Correct some 8bit to 16bit field conversions/comparisons Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_nportdisc.c | 69 +++++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 507a6af56f4..fbead786031 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -55,55 +55,76 @@ lpfc_check_adisc(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, return (1); } - int lpfc_check_sparm(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp, struct serv_parm * sp, uint32_t class) { volatile struct serv_parm *hsp = &phba->fc_sparam; - /* First check for supported version */ - - /* Next check for class validity */ + uint16_t hsp_value, ssp_value = 0; + + /* + * The receive data field size and buffer-to-buffer receive data field + * size entries are 16 bits but are represented as two 8-bit fields in + * the driver data structure to account for rsvd bits and other control + * bits. Reconstruct and compare the fields as a 16-bit values before + * correcting the byte values. + */ if (sp->cls1.classValid) { - - if (sp->cls1.rcvDataSizeMsb > hsp->cls1.rcvDataSizeMsb) - sp->cls1.rcvDataSizeMsb = hsp->cls1.rcvDataSizeMsb; - if (sp->cls1.rcvDataSizeLsb > hsp->cls1.rcvDataSizeLsb) + hsp_value = (hsp->cls1.rcvDataSizeMsb << 8) | + hsp->cls1.rcvDataSizeLsb; + ssp_value = (sp->cls1.rcvDataSizeMsb << 8) | + sp->cls1.rcvDataSizeLsb; + if (ssp_value > hsp_value) { sp->cls1.rcvDataSizeLsb = hsp->cls1.rcvDataSizeLsb; + sp->cls1.rcvDataSizeMsb = hsp->cls1.rcvDataSizeMsb; + } } else if (class == CLASS1) { - return (0); + return 0; } if (sp->cls2.classValid) { - - if (sp->cls2.rcvDataSizeMsb > hsp->cls2.rcvDataSizeMsb) - sp->cls2.rcvDataSizeMsb = hsp->cls2.rcvDataSizeMsb; - if (sp->cls2.rcvDataSizeLsb > hsp->cls2.rcvDataSizeLsb) + hsp_value = (hsp->cls2.rcvDataSizeMsb << 8) | + hsp->cls2.rcvDataSizeLsb; + ssp_value = (sp->cls2.rcvDataSizeMsb << 8) | + sp->cls2.rcvDataSizeLsb; + if (ssp_value > hsp_value) { sp->cls2.rcvDataSizeLsb = hsp->cls2.rcvDataSizeLsb; + sp->cls2.rcvDataSizeMsb = hsp->cls2.rcvDataSizeMsb; + } } else if (class == CLASS2) { - return (0); + return 0; } if (sp->cls3.classValid) { - - if (sp->cls3.rcvDataSizeMsb > hsp->cls3.rcvDataSizeMsb) - sp->cls3.rcvDataSizeMsb = hsp->cls3.rcvDataSizeMsb; - if (sp->cls3.rcvDataSizeLsb > hsp->cls3.rcvDataSizeLsb) + hsp_value = (hsp->cls3.rcvDataSizeMsb << 8) | + hsp->cls3.rcvDataSizeLsb; + ssp_value = (sp->cls3.rcvDataSizeMsb << 8) | + sp->cls3.rcvDataSizeLsb; + if (ssp_value > hsp_value) { sp->cls3.rcvDataSizeLsb = hsp->cls3.rcvDataSizeLsb; + sp->cls3.rcvDataSizeMsb = hsp->cls3.rcvDataSizeMsb; + } } else if (class == CLASS3) { - return (0); + return 0; } - if (sp->cmn.bbRcvSizeMsb > hsp->cmn.bbRcvSizeMsb) - sp->cmn.bbRcvSizeMsb = hsp->cmn.bbRcvSizeMsb; - if (sp->cmn.bbRcvSizeLsb > hsp->cmn.bbRcvSizeLsb) + /* + * Preserve the upper four bits of the MSB from the PLOGI response. + * These bits contain the Buffer-to-Buffer State Change Number + * from the target and need to be passed to the FW. + */ + hsp_value = (hsp->cmn.bbRcvSizeMsb << 8) | hsp->cmn.bbRcvSizeLsb; + ssp_value = (sp->cmn.bbRcvSizeMsb << 8) | sp->cmn.bbRcvSizeLsb; + if (ssp_value > hsp_value) { sp->cmn.bbRcvSizeLsb = hsp->cmn.bbRcvSizeLsb; + sp->cmn.bbRcvSizeMsb = (sp->cmn.bbRcvSizeMsb & 0xF0) | + (hsp->cmn.bbRcvSizeMsb & 0x0F); + } - /* If check is good, copy wwpn wwnn into ndlp */ memcpy(&ndlp->nlp_nodename, &sp->nodeName, sizeof (struct lpfc_name)); memcpy(&ndlp->nlp_portname, &sp->portName, sizeof (struct lpfc_name)); - return (1); + return 1; } static void * -- cgit v1.2.3-70-g09d2 From 6281bfe0002acd7765cb4afe0304c36962ad6b15 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:41:33 -0500 Subject: [SCSI] lpfc 8.1.1 : Fixes for short cable pulls Cause: Link bounces were causing discovery ELS's to be killed. Driver was not properly flushing ELS commands upon the subsequent link bounces. Thus, processing of ELS post link bounce erroneously assumed discovery failure and device loss. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 4 ++++ drivers/scsi/lpfc/lpfc_init.c | 2 ++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index bcc29ec126d..20f1a0713db 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -720,6 +720,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, /* Do not call DSM for lpfc_els_abort'ed ELS cmds */ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || (irsp->un.ulpWord[4] == IOERR_SLI_DOWN))) { disc = (ndlp->nlp_flag & NLP_NPR_2B_DISC); } @@ -869,6 +870,7 @@ lpfc_cmpl_els_prli(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, /* Do not call DSM for lpfc_els_abort'ed ELS cmds */ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || (irsp->un.ulpWord[4] == IOERR_SLI_DOWN))) { goto out; } @@ -1054,6 +1056,7 @@ lpfc_cmpl_els_adisc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, /* Do not call DSM for lpfc_els_abort'ed ELS cmds */ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || (irsp->un.ulpWord[4] == IOERR_SLI_DOWN))) { disc = (ndlp->nlp_flag & NLP_NPR_2B_DISC); } @@ -1205,6 +1208,7 @@ lpfc_cmpl_els_logo(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb, /* Do not call DSM for lpfc_els_abort'ed ELS cmds */ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) && ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) || + (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) || (irsp->un.ulpWord[4] == IOERR_SLI_DOWN))) { goto out; } diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 3eebe663a2e..4d4e217edd8 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -563,6 +563,8 @@ lpfc_handle_latt(struct lpfc_hba * phba) rc = -EIO; + /* Cleanup any outstanding ELS commands */ + lpfc_els_flush_cmd(phba); psli->slistat.link_event++; lpfc_read_la(phba, pmb, mp); -- cgit v1.2.3-70-g09d2 From 23dc04f1ec0d2f8fdda82ad1f9aa87b6ed74cd4a Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:41:44 -0500 Subject: [SCSI] lpfc 8.1.1 : Adjust use of scsi_block_requests and interaction w/ FC transport - Remove unnecessary scsi_block_requests calls on rport deletes. This was deadlocking the sdev removals as they wanted to flush commands. - No longer block requests when adding the remote port (to block discovery). Instead, register, then change port role. Maps to Qlogic behavior, and closer to the register-node-upon-first-ELS behavior. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 259eeb161b8..a1f751e7940 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -1017,12 +1017,7 @@ lpfc_register_remote_port(struct lpfc_hba * phba, rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); rport_ids.port_id = ndlp->nlp_DID; rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; - if (ndlp->nlp_type & NLP_FCP_TARGET) - rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; - if (ndlp->nlp_type & NLP_FCP_INITIATOR) - rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; - scsi_block_requests(phba->host); ndlp->rport = rport = fc_remote_port_add(phba->host, 0, &rport_ids); if (!rport) { dev_printk(KERN_WARNING, &phba->pcidev->dev, @@ -1039,7 +1034,16 @@ lpfc_register_remote_port(struct lpfc_hba * phba, } rdata = rport->dd_data; rdata->pnode = ndlp; - scsi_unblock_requests(phba->host); + + if (ndlp->nlp_type & NLP_FCP_TARGET) + rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET; + if (ndlp->nlp_type & NLP_FCP_INITIATOR) + rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; + + + if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN) + fc_remote_port_rolechg(rport, rport_ids.roles); + return; } @@ -1053,9 +1057,7 @@ lpfc_unregister_remote_port(struct lpfc_hba * phba, ndlp->rport = NULL; rdata->pnode = NULL; - scsi_block_requests(phba->host); fc_remote_port_delete(rport); - scsi_unblock_requests(phba->host); return; } -- cgit v1.2.3-70-g09d2 From 63c59c3b8ff444b771a245f59935c0202ece963b Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:41:53 -0500 Subject: [SCSI] lpfc 8.1.1 : Remove locking wrappers around error handlers Remove locking wrappers around error handlers. Wrappers were added in early 2.6.13 api change Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 52 ++++++++++++------------------------------- 1 file changed, 14 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 0aa5ca68433..a4d8455de44 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -760,11 +760,12 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) return 0; } + static int -__lpfc_abort_handler(struct scsi_cmnd *cmnd) +lpfc_abort_handler(struct scsi_cmnd *cmnd) { - struct lpfc_hba *phba = - (struct lpfc_hba *)cmnd->device->host->hostdata[0]; + struct Scsi_Host *shost = cmnd->device->host; + struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata[0]; struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring]; struct lpfc_iocbq *iocb; struct lpfc_iocbq *abtsiocb; @@ -773,6 +774,7 @@ __lpfc_abort_handler(struct scsi_cmnd *cmnd) unsigned int loop_count = 0; int ret = SUCCESS; + spin_lock_irq(shost->host_lock); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; BUG_ON(!lpfc_cmd); @@ -850,21 +852,13 @@ __lpfc_abort_handler(struct scsi_cmnd *cmnd) phba->brd_no, ret, cmnd->device->id, cmnd->device->lun, cmnd->serial_number); - return ret; -} + spin_unlock_irq(shost->host_lock); -static int -lpfc_abort_handler(struct scsi_cmnd *cmnd) -{ - int rc; - spin_lock_irq(cmnd->device->host->host_lock); - rc = __lpfc_abort_handler(cmnd); - spin_unlock_irq(cmnd->device->host->host_lock); - return rc; + return ret; } static int -__lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) +lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) { struct Scsi_Host *shost = cmnd->device->host; struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata[0]; @@ -875,6 +869,7 @@ __lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) int ret = FAILED; int cnt, loopcnt; + spin_lock_irq(shost->host_lock); /* * If target is not in a MAPPED state, delay the reset until * target is rediscovered or nodev timeout expires. @@ -964,24 +959,12 @@ out_free_scsi_buf: lpfc_cmd->result); lpfc_release_scsi_buf(phba, lpfc_cmd); out: + spin_unlock_irq(shost->host_lock); return ret; } static int -lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) -{ - int rc; - spin_lock_irq(cmnd->device->host->host_lock); - rc = __lpfc_reset_lun_handler(cmnd); - spin_unlock_irq(cmnd->device->host->host_lock); - return rc; -} - -/* - * Note: midlayer calls this function with the host_lock held - */ -static int -__lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) +lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) { struct Scsi_Host *shost = cmnd->device->host; struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata[0]; @@ -992,6 +975,8 @@ __lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) unsigned int midlayer_id = 0; struct lpfc_scsi_buf * lpfc_cmd; + spin_lock_irq(shost->host_lock); + lpfc_cmd = lpfc_sli_get_scsi_buf (phba); if (lpfc_cmd == NULL) goto out; @@ -1067,19 +1052,10 @@ __lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) "%d:0714 SCSI layer issued Bus Reset Data: x%x\n", phba->brd_no, ret); out: + spin_unlock_irq(shost->host_lock); return ret; } -static int -lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) -{ - int rc; - spin_lock_irq(cmnd->device->host->host_lock); - rc = __lpfc_reset_bus_handler(cmnd); - spin_unlock_irq(cmnd->device->host->host_lock); - return rc; -} - static int lpfc_slave_alloc(struct scsi_device *sdev) { -- cgit v1.2.3-70-g09d2 From 6175c02a0b12f92c03b56c756c4f1e131ae1456c Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:42:05 -0500 Subject: [SCSI] lpfc 8.1.1 : Fixes to error handlers - Release task management command before counting outstanding commands. TMF was being erroneously counted as an active outstanding command. - Serialize EH calls and block requests when EH function is running. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_init.c | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 104 +++++++++++++++++++++++++++--------------- 3 files changed, 70 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 3062b39fbdb..dc73a2f8f12 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -167,6 +167,7 @@ struct lpfc_hba { dma_addr_t slim2p_mapping; uint16_t pci_cfg_value; + struct semaphore hba_can_block; uint32_t hba_state; #define LPFC_INIT_START 1 /* Initial state after board reset */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 4d4e217edd8..dfd59d21ec4 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1345,7 +1345,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) goto out_put_host; host->unique_id = phba->brd_no; - + init_MUTEX(&phba->hba_can_block); INIT_LIST_HEAD(&phba->ctrspbuflist); INIT_LIST_HEAD(&phba->rnidrspbuflist); INIT_LIST_HEAD(&phba->freebufList); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index a4d8455de44..7dc7810b748 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -41,6 +41,20 @@ #define LPFC_ABORT_WAIT 2 +static inline void +lpfc_block_requests(struct lpfc_hba * phba) +{ + down(&phba->hba_can_block); + scsi_block_requests(phba->host); +} + +static inline void +lpfc_unblock_requests(struct lpfc_hba * phba) +{ + scsi_unblock_requests(phba->host); + up(&phba->hba_can_block); +} + /* * This routine allocates a scsi buffer, which contains all the necessary * information needed to initiate a SCSI I/O. The non-DMAable buffer region @@ -774,6 +788,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) unsigned int loop_count = 0; int ret = SUCCESS; + lpfc_block_requests(phba); spin_lock_irq(shost->host_lock); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; @@ -853,6 +868,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) cmnd->device->lun, cmnd->serial_number); spin_unlock_irq(shost->host_lock); + lpfc_unblock_requests(phba); return ret; } @@ -866,9 +882,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) struct lpfc_iocbq *iocbq, *iocbqrsp; struct lpfc_rport_data *rdata = cmnd->device->hostdata; struct lpfc_nodelist *pnode = rdata->pnode; + uint32_t cmd_result = 0, cmd_status = 0; int ret = FAILED; int cnt, loopcnt; + lpfc_block_requests(phba); spin_lock_irq(shost->host_lock); /* * If target is not in a MAPPED state, delay the reset until @@ -912,26 +930,28 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) if (ret == IOCB_SUCCESS) ret = SUCCESS; - lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4]; - lpfc_cmd->status = iocbqrsp->iocb.ulpStatus; - if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT) - if (lpfc_cmd->result & IOERR_DRVR_MASK) - lpfc_cmd->status = IOSTAT_DRIVER_REJECT; + + cmd_result = iocbqrsp->iocb.un.ulpWord[4]; + cmd_status = iocbqrsp->iocb.ulpStatus; + + lpfc_sli_release_iocbq(phba, iocbqrsp); + lpfc_release_scsi_buf(phba, lpfc_cmd); /* - * All outstanding txcmplq I/Os should have been aborted by the target. + * All outstanding txcmplq I/Os should have been aborted by the device. * Unfortunately, some targets do not abide by this forcing the driver * to double check. */ - lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], - cmnd->device->id, cmnd->device->lun, 0, - LPFC_CTX_LUN); - + cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], + cmnd->device->id, cmnd->device->lun, + LPFC_CTX_LUN); + if (cnt) + lpfc_sli_abort_iocb(phba, + &phba->sli.ring[phba->sli.fcp_ring], + cmnd->device->id, cmnd->device->lun, + 0, LPFC_CTX_LUN); loopcnt = 0; - while((cnt = lpfc_sli_sum_iocb(phba, - &phba->sli.ring[phba->sli.fcp_ring], - cmnd->device->id, cmnd->device->lun, - LPFC_CTX_LUN))) { + while(cnt) { spin_unlock_irq(phba->host->host_lock); schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ); spin_lock_irq(phba->host->host_lock); @@ -939,6 +959,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) if (++loopcnt > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT) break; + + cnt = lpfc_sli_sum_iocb(phba, + &phba->sli.ring[phba->sli.fcp_ring], + cmnd->device->id, cmnd->device->lun, + LPFC_CTX_LUN); } if (cnt) { @@ -948,18 +973,16 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) ret = FAILED; } - lpfc_sli_release_iocbq(phba, iocbqrsp); - out_free_scsi_buf: lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0713 SCSI layer issued LUN reset (%d, %d) " "Data: x%x x%x x%x\n", - phba->brd_no, lpfc_cmd->pCmd->device->id, - lpfc_cmd->pCmd->device->lun, ret, lpfc_cmd->status, - lpfc_cmd->result); - lpfc_release_scsi_buf(phba, lpfc_cmd); + phba->brd_no, cmnd->device->id,cmnd->device->lun, + ret, cmd_status, cmd_result); + out: spin_unlock_irq(shost->host_lock); + lpfc_unblock_requests(phba); return ret; } @@ -975,6 +998,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) unsigned int midlayer_id = 0; struct lpfc_scsi_buf * lpfc_cmd; + lpfc_block_requests(phba); spin_lock_irq(shost->host_lock); lpfc_cmd = lpfc_sli_get_scsi_buf (phba); @@ -1008,18 +1032,31 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data; ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba); if (ret != SUCCESS) { - lpfc_printf_log(phba, KERN_INFO, LOG_FCP, + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0713 Bus Reset on target %d failed\n", phba->brd_no, i); err_count++; } } + if (err_count == 0) + ret = SUCCESS; + + lpfc_release_scsi_buf(phba, lpfc_cmd); + + /* + * All outstanding txcmplq I/Os should have been aborted by + * the targets. Unfortunately, some targets do not abide by + * this forcing the driver to double check. + */ cmnd->device->id = midlayer_id; + cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], + 0, 0, LPFC_CTX_HOST); + if (cnt) + lpfc_sli_abort_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring], + 0, 0, 0, LPFC_CTX_HOST); loopcnt = 0; - while((cnt = lpfc_sli_sum_iocb(phba, - &phba->sli.ring[phba->sli.fcp_ring], - 0, 0, LPFC_CTX_HOST))) { + while(cnt) { spin_unlock_irq(phba->host->host_lock); schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ); spin_lock_irq(phba->host->host_lock); @@ -1027,25 +1064,19 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) if (++loopcnt > (2 * phba->cfg_nodev_tmo)/LPFC_RESET_WAIT) break; + + cnt = lpfc_sli_sum_iocb(phba, + &phba->sli.ring[phba->sli.fcp_ring], + 0, 0, LPFC_CTX_HOST); } if (cnt) { - /* flush all outstanding commands on the host */ - i = lpfc_sli_abort_iocb(phba, - &phba->sli.ring[phba->sli.fcp_ring], 0, 0, 0, - LPFC_CTX_HOST); - - lpfc_printf_log(phba, KERN_INFO, LOG_FCP, + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, "%d:0715 Bus Reset I/O flush failure: cnt x%x left x%x\n", phba->brd_no, cnt, i); - } - - if (cnt == 0) - ret = SUCCESS; - else ret = FAILED; + } - lpfc_release_scsi_buf(phba, lpfc_cmd); lpfc_printf_log(phba, KERN_ERR, LOG_FCP, @@ -1053,6 +1084,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) phba->brd_no, ret); out: spin_unlock_irq(shost->host_lock); + lpfc_unblock_requests(phba); return ret; } -- cgit v1.2.3-70-g09d2 From e4adb20406385d1cc8fdb15e92ed7ac3d0ae41f6 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:42:12 -0500 Subject: [SCSI] lpfc 8.1.1 : Add support for more members of the Light Pulse 11xxx (4Gb) family Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw.h | 25 ++++++++++++------ drivers/scsi/lpfc/lpfc_init.c | 60 ++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 74 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index bf0c25fa873..4f002930141 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1027,23 +1027,32 @@ typedef struct { /* Start FireFly Register definitions */ #define PCI_VENDOR_ID_EMULEX 0x10df #define PCI_DEVICE_ID_FIREFLY 0x1ae5 -#define PCI_DEVICE_ID_SUPERFLY 0xf700 -#define PCI_DEVICE_ID_DRAGONFLY 0xf800 #define PCI_DEVICE_ID_RFLY 0xf095 #define PCI_DEVICE_ID_PFLY 0xf098 +#define PCI_DEVICE_ID_LP101 0xf0a1 #define PCI_DEVICE_ID_TFLY 0xf0a5 +#define PCI_DEVICE_ID_BSMB 0xf0d1 +#define PCI_DEVICE_ID_BMID 0xf0d5 +#define PCI_DEVICE_ID_ZSMB 0xf0e1 +#define PCI_DEVICE_ID_ZMID 0xf0e5 +#define PCI_DEVICE_ID_NEPTUNE 0xf0f5 +#define PCI_DEVICE_ID_NEPTUNE_SCSP 0xf0f6 +#define PCI_DEVICE_ID_NEPTUNE_DCSP 0xf0f7 +#define PCI_DEVICE_ID_SUPERFLY 0xf700 +#define PCI_DEVICE_ID_DRAGONFLY 0xf800 #define PCI_DEVICE_ID_CENTAUR 0xf900 #define PCI_DEVICE_ID_PEGASUS 0xf980 #define PCI_DEVICE_ID_THOR 0xfa00 #define PCI_DEVICE_ID_VIPER 0xfb00 +#define PCI_DEVICE_ID_LP10000S 0xfc00 +#define PCI_DEVICE_ID_LP11000S 0xfc10 +#define PCI_DEVICE_ID_LPE11000S 0xfc20 #define PCI_DEVICE_ID_HELIOS 0xfd00 -#define PCI_DEVICE_ID_BMID 0xf0d5 -#define PCI_DEVICE_ID_BSMB 0xf0d1 +#define PCI_DEVICE_ID_HELIOS_SCSP 0xfd11 +#define PCI_DEVICE_ID_HELIOS_DCSP 0xfd12 #define PCI_DEVICE_ID_ZEPHYR 0xfe00 -#define PCI_DEVICE_ID_ZMID 0xf0e5 -#define PCI_DEVICE_ID_ZSMB 0xf0e1 -#define PCI_DEVICE_ID_LP101 0xf0a1 -#define PCI_DEVICE_ID_LP10000S 0xfc00 +#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11 +#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12 #define JEDEC_ID_ADDRESS 0x0080001c #define FIREFLY_JEDEC_ID 0x1ACC diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index dfd59d21ec4..1ab3dac7b63 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -759,15 +759,15 @@ static void lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) { lpfc_vpd_t *vp; - uint32_t id; + uint16_t dev_id; uint8_t hdrtype; char str[16]; vp = &phba->vpd; - pci_read_config_dword(phba->pcidev, PCI_VENDOR_ID, &id); + pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id); pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype); - switch ((id >> 16) & 0xffff) { + switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: strcpy(str, "LP6000 1"); break; @@ -816,6 +816,24 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) else strcpy(str, "LP11000 4"); break; + case PCI_DEVICE_ID_HELIOS_SCSP: + strcpy(str, "LP11000-SP 4"); + break; + case PCI_DEVICE_ID_HELIOS_DCSP: + strcpy(str, "LP11002-SP 4"); + break; + case PCI_DEVICE_ID_NEPTUNE: + if (hdrtype == 0x80) + strcpy(str, "LPe1002 4"); + else + strcpy(str, "LPe1000 4"); + break; + case PCI_DEVICE_ID_NEPTUNE_SCSP: + strcpy(str, "LPe1000-SP 4"); + break; + case PCI_DEVICE_ID_NEPTUNE_DCSP: + strcpy(str, "LPe1002-SP 4"); + break; case PCI_DEVICE_ID_BMID: strcpy(str, "LP1150 4"); break; @@ -828,6 +846,12 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) else strcpy(str, "LPe11000 4"); break; + case PCI_DEVICE_ID_ZEPHYR_SCSP: + strcpy(str, "LPe11000-SP 4"); + break; + case PCI_DEVICE_ID_ZEPHYR_DCSP: + strcpy(str, "LPe11002-SP 4"); + break; case PCI_DEVICE_ID_ZMID: strcpy(str, "LPe1150 4"); break; @@ -843,6 +867,18 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) default: memset(str, 0, 16); break; + case PCI_DEVICE_ID_LP11000S: + if (hdrtype == 0x80) + strcpy(str, "LP11002-S 4"); + else + strcpy(str, "LP11000-S 4"); + break; + case PCI_DEVICE_ID_LPE11000S: + if (hdrtype == 0x80) + strcpy(str, "LPe11002-S 4"); + else + strcpy(str, "LPe11000-S 4"); + break; } if (mdp) sscanf(str, "%s", mdp); @@ -1673,14 +1709,28 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP, + PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID, PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB, @@ -1691,6 +1741,10 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; -- cgit v1.2.3-70-g09d2 From 5cc36b3cd0e3610ad7c7e2514160998276798fc0 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:42:19 -0500 Subject: [SCSI] lpfc 8.1.1 : Bring model descriptions in sync with Emulex standard generic names Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hw.h | 6 +++ drivers/scsi/lpfc/lpfc_init.c | 107 +++++++++++++++++++++++------------------- 2 files changed, 65 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 4f002930141..1ea565e0561 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1054,6 +1054,12 @@ typedef struct { #define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11 #define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12 +#define PCI_SUBSYSTEM_ID_LP11000S 0xfc11 +#define PCI_SUBSYSTEM_ID_LP11002S 0xfc12 +#define PCI_SUBSYSTEM_ID_LPE11000S 0xfc21 +#define PCI_SUBSYSTEM_ID_LPE11002S 0xfc22 +#define PCI_SUBSYSTEM_ID_LPE11010S 0xfc2A + #define JEDEC_ID_ADDRESS 0x0080001c #define FIREFLY_JEDEC_ID 0x1ACC #define SUPERFLY_JEDEC_ID 0x0020 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 1ab3dac7b63..766dac230a6 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -760,8 +760,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) { lpfc_vpd_t *vp; uint16_t dev_id; + uint16_t dev_subid; uint8_t hdrtype; - char str[16]; + char *model_str = ""; vp = &phba->vpd; pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id); @@ -769,122 +770,132 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: - strcpy(str, "LP6000 1"); + model_str = "LP6000 1Gb PCI"; break; case PCI_DEVICE_ID_SUPERFLY: if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) - strcpy(str, "LP7000 1"); + model_str = "LP7000 1Gb PCI"; else - strcpy(str, "LP7000E 1"); + model_str = "LP7000E 1Gb PCI"; break; case PCI_DEVICE_ID_DRAGONFLY: - strcpy(str, "LP8000 1"); + model_str = "LP8000 1Gb PCI"; break; case PCI_DEVICE_ID_CENTAUR: if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) - strcpy(str, "LP9002 2"); + model_str = "LP9002 2Gb PCI"; else - strcpy(str, "LP9000 1"); + model_str = "LP9000 1Gb PCI"; break; case PCI_DEVICE_ID_RFLY: - strcpy(str, "LP952 2"); + model_str = "LP952 2Gb PCI"; break; case PCI_DEVICE_ID_PEGASUS: - strcpy(str, "LP9802 2"); + model_str = "LP9802 2Gb PCI-X"; break; case PCI_DEVICE_ID_THOR: if (hdrtype == 0x80) - strcpy(str, "LP10000DC 2"); + model_str = "LP10000DC 2Gb 2-port PCI-X"; else - strcpy(str, "LP10000 2"); + model_str = "LP10000 2Gb PCI-X"; break; case PCI_DEVICE_ID_VIPER: - strcpy(str, "LPX1000 10"); + model_str = "LPX1000 10Gb PCI-X"; break; case PCI_DEVICE_ID_PFLY: - strcpy(str, "LP982 2"); + model_str = "LP982 2Gb PCI-X"; break; case PCI_DEVICE_ID_TFLY: if (hdrtype == 0x80) - strcpy(str, "LP1050DC 2"); + model_str = "LP1050DC 2Gb 2-port PCI-X"; else - strcpy(str, "LP1050 2"); + model_str = "LP1050 2Gb PCI-X"; break; case PCI_DEVICE_ID_HELIOS: if (hdrtype == 0x80) - strcpy(str, "LP11002 4"); + model_str = "LP11002 4Gb 2-port PCI-X2"; else - strcpy(str, "LP11000 4"); + model_str = "LP11000 4Gb PCI-X2"; break; case PCI_DEVICE_ID_HELIOS_SCSP: - strcpy(str, "LP11000-SP 4"); + model_str = "LP11000-SP 4Gb PCI-X2"; break; case PCI_DEVICE_ID_HELIOS_DCSP: - strcpy(str, "LP11002-SP 4"); + model_str = "LP11002-SP 4Gb 2-port PCI-X2"; break; case PCI_DEVICE_ID_NEPTUNE: if (hdrtype == 0x80) - strcpy(str, "LPe1002 4"); + model_str = "LPe1002 4Gb 2-port"; else - strcpy(str, "LPe1000 4"); + model_str = "LPe1000 4Gb PCIe"; break; case PCI_DEVICE_ID_NEPTUNE_SCSP: - strcpy(str, "LPe1000-SP 4"); + model_str = "LPe1000-SP 4Gb PCIe"; break; case PCI_DEVICE_ID_NEPTUNE_DCSP: - strcpy(str, "LPe1002-SP 4"); + model_str = "LPe1002-SP 4Gb 2-port PCIe"; break; case PCI_DEVICE_ID_BMID: - strcpy(str, "LP1150 4"); + model_str = "LP1150 4Gb PCI-X2"; break; case PCI_DEVICE_ID_BSMB: - strcpy(str, "LP111 4"); + model_str = "LP111 4Gb PCI-X2"; break; case PCI_DEVICE_ID_ZEPHYR: if (hdrtype == 0x80) - strcpy(str, "LPe11002 4"); + model_str = "LPe11002 4Gb 2-port PCIe"; else - strcpy(str, "LPe11000 4"); + model_str = "LPe11000 4Gb PCIe"; break; case PCI_DEVICE_ID_ZEPHYR_SCSP: - strcpy(str, "LPe11000-SP 4"); + model_str = "LPe11000-SP 4Gb PCIe"; break; case PCI_DEVICE_ID_ZEPHYR_DCSP: - strcpy(str, "LPe11002-SP 4"); + model_str = "LPe11002-SP 4Gb 2-port PCIe"; break; case PCI_DEVICE_ID_ZMID: - strcpy(str, "LPe1150 4"); + model_str = "LPe1150 4Gb PCIe"; break; case PCI_DEVICE_ID_ZSMB: - strcpy(str, "LPe111 4"); + model_str = "LPe111 4Gb PCIe"; break; case PCI_DEVICE_ID_LP101: - strcpy(str, "LP101 2"); + model_str = "LP101 2Gb PCI-X"; break; case PCI_DEVICE_ID_LP10000S: - strcpy(str, "LP10000-S 2"); - break; - default: - memset(str, 0, 16); + model_str = "LP10000-S 2Gb PCI"; break; case PCI_DEVICE_ID_LP11000S: - if (hdrtype == 0x80) - strcpy(str, "LP11002-S 4"); - else - strcpy(str, "LP11000-S 4"); - break; case PCI_DEVICE_ID_LPE11000S: - if (hdrtype == 0x80) - strcpy(str, "LPe11002-S 4"); - else - strcpy(str, "LPe11000-S 4"); + pci_read_config_word(phba->pcidev, PCI_SUBSYSTEM_ID, + &dev_subid); + switch (dev_subid) { + case PCI_SUBSYSTEM_ID_LP11000S: + model_str = "LP11002-S 4Gb PCI-X2"; + break; + case PCI_SUBSYSTEM_ID_LP11002S: + model_str = "LP11000-S 4Gb 2-port PCI-X2"; + break; + case PCI_SUBSYSTEM_ID_LPE11000S: + model_str = "LPe11002-S 4Gb PCIe"; + break; + case PCI_SUBSYSTEM_ID_LPE11002S: + model_str = "LPe11002-S 4Gb 2-port PCIe"; + break; + case PCI_SUBSYSTEM_ID_LPE11010S: + model_str = "LPe11010-S 4Gb 10-port PCIe"; + break; + default: + break; + } + break; + default: break; } if (mdp) - sscanf(str, "%s", mdp); + sscanf(model_str, "%s", mdp); if (descp) - sprintf(descp, "Emulex LightPulse %s Gigabit PCI Fibre " - "Channel Adapter", str); + sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str); } /**************************************************/ -- cgit v1.2.3-70-g09d2 From 875fbdfe9b1b4c8f12622a8d8d81428ff0984875 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Tue, 29 Nov 2005 16:32:13 -0500 Subject: [SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 10 ++ drivers/scsi/lpfc/lpfc_attr.c | 92 +++++++++++++++++- drivers/scsi/lpfc/lpfc_crtn.h | 3 + drivers/scsi/lpfc/lpfc_init.c | 16 ++++ drivers/scsi/lpfc/lpfc_scsi.c | 72 ++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 217 ++++++++++++++++++++++++++++++++++++++---- 6 files changed, 377 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dc73a2f8f12..1f3873ae9d6 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -45,6 +45,11 @@ struct lpfc_sli2_slim; #define MAX_HBAEVT 32 +enum lpfc_polling_flags { + ENABLE_FCP_RING_POLLING = 0x1, + DISABLE_FCP_RING_INT = 0x2 +}; + /* Provide DMA memory definitions the driver uses per port instance. */ struct lpfc_dmabuf { struct list_head list; @@ -287,6 +292,8 @@ struct lpfc_hba { uint32_t cfg_fcp_bind_method; uint32_t cfg_discovery_threads; uint32_t cfg_max_luns; + uint32_t cfg_poll; + uint32_t cfg_poll_tmo; uint32_t cfg_sg_seg_cnt; uint32_t cfg_sg_dma_buf_size; @@ -338,7 +345,9 @@ struct lpfc_hba { #define VPD_PORT 0x8 /* valid vpd port data */ #define VPD_MASK 0xf /* mask for any vpd data */ + struct timer_list fcp_poll_timer; struct timer_list els_tmofunc; + /* * stat counters */ @@ -349,6 +358,7 @@ struct lpfc_hba { struct lpfc_sysfs_mbox sysfs_mbox; /* fastpath list. */ + spinlock_t scsi_buf_list_lock; struct list_head lpfc_scsi_buf_list; uint32_t total_scsi_bufs; struct list_head lpfc_iocb_list; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 89e8222bc7c..5625a8c2a8f 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -278,6 +278,71 @@ lpfc_board_online_store(struct class_device *cdev, const char *buf, return -EIO; } +static ssize_t +lpfc_poll_show(struct class_device *cdev, char *buf) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata[0]; + + return snprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll); +} + +static ssize_t +lpfc_poll_store(struct class_device *cdev, const char *buf, + size_t count) +{ + struct Scsi_Host *host = class_to_shost(cdev); + struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata[0]; + uint32_t creg_val; + uint32_t old_val; + int val=0; + + if (!isdigit(buf[0])) + return -EINVAL; + + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + + if ((val & 0x3) != val) + return -EINVAL; + + spin_lock_irq(phba->host->host_lock); + + old_val = phba->cfg_poll; + + if (val & ENABLE_FCP_RING_POLLING) { + if ((val & DISABLE_FCP_RING_INT) && + !(old_val & DISABLE_FCP_RING_INT)) { + creg_val = readl(phba->HCregaddr); + creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING); + writel(creg_val, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + + lpfc_poll_start_timer(phba); + } + } else if (val != 0x0) { + spin_unlock_irq(phba->host->host_lock); + return -EINVAL; + } + + if (!(val & DISABLE_FCP_RING_INT) && + (old_val & DISABLE_FCP_RING_INT)) + { + spin_unlock_irq(phba->host->host_lock); + del_timer(&phba->fcp_poll_timer); + spin_lock_irq(phba->host->host_lock); + creg_val = readl(phba->HCregaddr); + creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); + writel(creg_val, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + } + + phba->cfg_poll = val; + + spin_unlock_irq(phba->host->host_lock); + + return strlen(buf); +} #define lpfc_param_show(attr) \ static ssize_t \ @@ -416,6 +481,15 @@ static CLASS_DEVICE_ATTR(management_version, S_IRUGO, management_version_show, static CLASS_DEVICE_ATTR(board_online, S_IRUGO | S_IWUSR, lpfc_board_online_show, lpfc_board_online_store); +static int lpfc_poll = 0; +module_param(lpfc_poll, int, 0); +MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:" + " 0 - none," + " 1 - poll with interrupts enabled" + " 3 - poll and disable FCP ring interrupts"); + +static CLASS_DEVICE_ATTR(lpfc_poll, S_IRUGO | S_IWUSR, + lpfc_poll_show, lpfc_poll_store); /* # lpfc_log_verbose: Only turn this flag on if you are willing to risk being @@ -523,10 +597,10 @@ LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support"); # is 0. Default value of cr_count is 1. The cr_count feature is disabled if # cr_delay is set to 0. */ -LPFC_ATTR(cr_delay, 0, 0, 63, "A count of milliseconds after which an" +LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an" "interrupt response is generated"); -LPFC_ATTR(cr_count, 1, 1, 255, "A count of I/O completions after which an" +LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an" "interrupt response is generated"); /* @@ -553,6 +627,13 @@ LPFC_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands" LPFC_ATTR_R(max_luns, 256, 1, 32768, "Maximum number of LUNs per target driver will support"); +/* +# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring. +# Value range is [1,255], default value is 10. +*/ +LPFC_ATTR_RW(poll_tmo, 10, 1, 255, + "Milliseconds driver will wait between polling FCP ring"); + struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_info, &class_device_attr_serialnum, @@ -575,11 +656,15 @@ struct class_device_attribute *lpfc_host_attrs[] = { &class_device_attr_lpfc_topology, &class_device_attr_lpfc_scan_down, &class_device_attr_lpfc_link_speed, + &class_device_attr_lpfc_cr_delay, + &class_device_attr_lpfc_cr_count, &class_device_attr_lpfc_fdmi_on, &class_device_attr_lpfc_max_luns, &class_device_attr_nport_evt_cnt, &class_device_attr_management_version, &class_device_attr_board_online, + &class_device_attr_lpfc_poll, + &class_device_attr_lpfc_poll_tmo, NULL, }; @@ -1292,6 +1377,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_fdmi_on_init(phba, lpfc_fdmi_on); lpfc_discovery_threads_init(phba, lpfc_discovery_threads); lpfc_max_luns_init(phba, lpfc_max_luns); + lpfc_poll_tmo_init(phba, lpfc_poll_tmo); + + phba->cfg_poll = lpfc_poll; /* * The total number of segments is the configuration value plus 2 diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index d527d05a607..f1e708946e6 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -143,6 +143,9 @@ LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *); int lpfc_mem_alloc(struct lpfc_hba *); void lpfc_mem_free(struct lpfc_hba *); +void lpfc_poll_timeout(unsigned long ptr); +void lpfc_poll_start_timer(struct lpfc_hba * phba); +void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 766dac230a6..db3c2ad4e94 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -370,6 +370,10 @@ lpfc_config_port_post(struct lpfc_hba * phba) if (psli->num_rings > 3) status |= HC_R3INT_ENA; + if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && + (phba->cfg_poll & DISABLE_FCP_RING_INT)) + status &= ~(HC_R0INT_ENA << LPFC_FCP_RING); + writel(status, phba->HCregaddr); readl(phba->HCregaddr); /* flush */ spin_unlock_irq(phba->host->host_lock); @@ -1237,6 +1241,7 @@ lpfc_stop_timer(struct lpfc_hba * phba) } } + del_timer_sync(&phba->fcp_poll_timer); del_timer_sync(&phba->fc_estabtmo); del_timer_sync(&phba->fc_disctmo); del_timer_sync(&phba->fc_fdmitmo); @@ -1416,6 +1421,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) psli->mbox_tmo.function = lpfc_mbox_timeout; psli->mbox_tmo.data = (unsigned long)phba; + init_timer(&phba->fcp_poll_timer); + phba->fcp_poll_timer.function = lpfc_poll_timeout; + phba->fcp_poll_timer.data = (unsigned long)phba; + /* * Get all the module params for configuring this host and then * establish the host parameters. @@ -1530,6 +1539,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) host->max_cmd_len = 16; /* Initialize the list of scsi buffers used by driver for scsi IO. */ + spin_lock_init(&phba->scsi_buf_list_lock); INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list); host->transportt = lpfc_transport_template; @@ -1561,6 +1571,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) if (error) goto out_free_irq; + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { + spin_lock_irq(phba->host->host_lock); + lpfc_poll_start_timer(phba); + spin_unlock_irq(phba->host->host_lock); + } + /* * set fixed host attributes * Must done after lpfc_sli_hba_setup() diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 7dc7810b748..c422220db0a 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -151,18 +151,22 @@ lpfc_new_scsi_buf(struct lpfc_hba * phba) } struct lpfc_scsi_buf* -lpfc_sli_get_scsi_buf(struct lpfc_hba * phba) +lpfc_get_scsi_buf(struct lpfc_hba * phba) { struct lpfc_scsi_buf * lpfc_cmd = NULL; struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list; + unsigned long iflag = 0; + spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list); + spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); return lpfc_cmd; } static void lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) { + unsigned long iflag = 0; /* * There are only two special cases to consider. (1) the scsi command * requested scatter-gather usage or (2) the scsi command allocated @@ -180,8 +184,10 @@ lpfc_release_scsi_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb) } } + spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag); psb->pCmd = NULL; list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list); + spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag); } static int @@ -403,7 +409,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_rport_data *rdata = lpfc_cmd->rdata; struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; - unsigned long iflag; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -457,9 +462,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->scsi_done(cmd); - spin_lock_irqsave(phba->host->host_lock, iflag); lpfc_release_scsi_buf(phba, lpfc_cmd); - spin_unlock_irqrestore(phba->host->host_lock, iflag); } static void @@ -707,6 +710,37 @@ lpfc_info(struct Scsi_Host *host) return lpfcinfobuf; } +static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba) +{ + unsigned long poll_tmo_expires = + (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo)); + + if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt) + mod_timer(&phba->fcp_poll_timer, + poll_tmo_expires); +} + +void lpfc_poll_start_timer(struct lpfc_hba * phba) +{ + lpfc_poll_rearm_timer(phba); +} + +void lpfc_poll_timeout(unsigned long ptr) +{ + struct lpfc_hba *phba = (struct lpfc_hba *)ptr; + unsigned long iflag; + + spin_lock_irqsave(phba->host->host_lock, iflag); + + if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + lpfc_sli_poll_fcp_ring (phba); + if (phba->cfg_poll & DISABLE_FCP_RING_INT) + lpfc_poll_rearm_timer(phba); + } + + spin_unlock_irqrestore(phba->host->host_lock, iflag); +} + static int lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) { @@ -733,7 +767,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) cmnd->result = ScsiResult(DID_BUS_BUSY, 0); goto out_fail_command; } - lpfc_cmd = lpfc_sli_get_scsi_buf (phba); + lpfc_cmd = lpfc_get_scsi_buf (phba); if (lpfc_cmd == NULL) { lpfc_printf_log(phba, KERN_INFO, LOG_FCP, "%d:0707 driver's buffer pool is empty, " @@ -761,11 +795,17 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB); if (err) goto out_host_busy_free_buf; + + if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + lpfc_sli_poll_fcp_ring(phba); + if (phba->cfg_poll & DISABLE_FCP_RING_INT) + lpfc_poll_rearm_timer(phba); + } + return 0; out_host_busy_free_buf: lpfc_release_scsi_buf(phba, lpfc_cmd); - cmnd->host_scribble = NULL; out_host_busy: return SCSI_MLQUEUE_HOST_BUSY; @@ -839,9 +879,15 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) goto out; } + if (phba->cfg_poll & DISABLE_FCP_RING_INT) + lpfc_sli_poll_fcp_ring (phba); + /* Wait for abort to complete */ while (lpfc_cmd->pCmd == cmnd) { + if (phba->cfg_poll & DISABLE_FCP_RING_INT) + lpfc_sli_poll_fcp_ring (phba); + spin_unlock_irq(phba->host->host_lock); schedule_timeout_uninterruptible(LPFC_ABORT_WAIT*HZ); spin_lock_irq(phba->host->host_lock); @@ -905,7 +951,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd) break; } - lpfc_cmd = lpfc_sli_get_scsi_buf (phba); + lpfc_cmd = lpfc_get_scsi_buf (phba); if (lpfc_cmd == NULL) goto out; @@ -1001,7 +1047,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd) lpfc_block_requests(phba); spin_lock_irq(shost->host_lock); - lpfc_cmd = lpfc_sli_get_scsi_buf (phba); + lpfc_cmd = lpfc_get_scsi_buf(phba); if (lpfc_cmd == NULL) goto out; @@ -1136,10 +1182,10 @@ lpfc_slave_alloc(struct scsi_device *sdev) break; } - spin_lock_irqsave(phba->host->host_lock, flags); + spin_lock_irqsave(&phba->scsi_buf_list_lock, flags); phba->total_scsi_bufs++; list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list); - spin_unlock_irqrestore(phba->host->host_lock, flags); + spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags); } return 0; } @@ -1163,6 +1209,12 @@ lpfc_slave_configure(struct scsi_device *sdev) */ rport->dev_loss_tmo = phba->cfg_nodev_tmo + 5; + if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + lpfc_sli_poll_fcp_ring(phba); + if (phba->cfg_poll & DISABLE_FCP_RING_INT) + lpfc_poll_rearm_timer(phba); + } + return 0; } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index e2c08c5d83f..7b785ade8b0 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -886,6 +886,182 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, return rc; } +static void lpfc_sli_rsp_pointers_error(struct lpfc_hba * phba, + struct lpfc_sli_ring * pring) +{ + struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno]; + /* + * Ring handler: portRspPut is bigger then + * rsp ring + */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "%d:0312 Ring %d handler: portRspPut %d " + "is bigger then rsp ring %d\n", + phba->brd_no, pring->ringno, + le32_to_cpu(pgp->rspPutInx), + pring->numRiocb); + + phba->hba_state = LPFC_HBA_ERROR; + + /* + * All error attention handlers are posted to + * worker thread + */ + phba->work_ha |= HA_ERATT; + phba->work_hs = HS_FFER3; + if (phba->work_wait) + wake_up(phba->work_wait); + + return; +} + +void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba) +{ + struct lpfc_sli * psli = &phba->sli; + struct lpfc_sli_ring * pring = &psli->ring[LPFC_FCP_RING]; + IOCB_t *irsp = NULL; + IOCB_t *entry = NULL; + struct lpfc_iocbq *cmdiocbq = NULL; + struct lpfc_iocbq rspiocbq; + struct lpfc_pgp *pgp; + uint32_t status; + uint32_t portRspPut, portRspMax; + int type; + uint32_t rsp_cmpl = 0; + void __iomem *to_slim; + uint32_t ha_copy; + + pring->stats.iocb_event++; + + /* The driver assumes SLI-2 mode */ + pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno]; + + /* + * The next available response entry should never exceed the maximum + * entries. If it does, treat it as an adapter hardware error. + */ + portRspMax = pring->numRiocb; + portRspPut = le32_to_cpu(pgp->rspPutInx); + if (unlikely(portRspPut >= portRspMax)) { + lpfc_sli_rsp_pointers_error(phba, pring); + return; + } + + rmb(); + while (pring->rspidx != portRspPut) { + + entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx); + + if (++pring->rspidx >= portRspMax) + pring->rspidx = 0; + + lpfc_sli_pcimem_bcopy((uint32_t *) entry, + (uint32_t *) &rspiocbq.iocb, + sizeof (IOCB_t)); + irsp = &rspiocbq.iocb; + type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK); + pring->stats.iocb_rsp++; + rsp_cmpl++; + + if (unlikely(irsp->ulpStatus)) { + /* Rsp ring error: IOCB */ + lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + "%d:0326 Rsp Ring %d error: IOCB Data: " + "x%x x%x x%x x%x x%x x%x x%x x%x\n", + phba->brd_no, pring->ringno, + irsp->un.ulpWord[0], + irsp->un.ulpWord[1], + irsp->un.ulpWord[2], + irsp->un.ulpWord[3], + irsp->un.ulpWord[4], + irsp->un.ulpWord[5], + *(((uint32_t *) irsp) + 6), + *(((uint32_t *) irsp) + 7)); + } + + switch (type) { + case LPFC_ABORT_IOCB: + case LPFC_SOL_IOCB: + /* + * Idle exchange closed via ABTS from port. No iocb + * resources need to be recovered. + */ + if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) { + printk(KERN_INFO "%s: IOCB cmd 0x%x processed." + " Skipping completion\n", __FUNCTION__, + irsp->ulpCommand); + break; + } + + cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring, + &rspiocbq); + if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) { + (cmdiocbq->iocb_cmpl)(phba, cmdiocbq, + &rspiocbq); + } + break; + default: + if (irsp->ulpCommand == CMD_ADAPTER_MSG) { + char adaptermsg[LPFC_MAX_ADPTMSG]; + memset(adaptermsg, 0, LPFC_MAX_ADPTMSG); + memcpy(&adaptermsg[0], (uint8_t *) irsp, + MAX_MSG_DATA); + dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s", + phba->brd_no, adaptermsg); + } else { + /* Unknown IOCB command */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "%d:0321 Unknown IOCB command " + "Data: x%x, x%x x%x x%x x%x\n", + phba->brd_no, type, + irsp->ulpCommand, + irsp->ulpStatus, + irsp->ulpIoTag, + irsp->ulpContext); + } + break; + } + + /* + * The response IOCB has been processed. Update the ring + * pointer in SLIM. If the port response put pointer has not + * been updated, sync the pgp->rspPutInx and fetch the new port + * response put pointer. + */ + to_slim = phba->MBslimaddr + + (SLIMOFF + (pring->ringno * 2) + 1) * 4; + writeb(pring->rspidx, to_slim); + + if (pring->rspidx == portRspPut) + portRspPut = le32_to_cpu(pgp->rspPutInx); + } + + ha_copy = readl(phba->HAregaddr); + ha_copy >>= (LPFC_FCP_RING * 4); + + if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) { + pring->stats.iocb_rsp_full++; + status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4)); + writel(status, phba->CAregaddr); + readl(phba->CAregaddr); + } + if ((ha_copy & HA_R0CE_RSP) && + (pring->flag & LPFC_CALL_RING_AVAILABLE)) { + pring->flag &= ~LPFC_CALL_RING_AVAILABLE; + pring->stats.iocb_cmd_empty++; + + /* Force update of the local copy of cmdGetInx */ + pring->local_getidx = le32_to_cpu(pgp->cmdGetInx); + lpfc_sli_resume_iocb(phba, pring); + + if ((pring->lpfc_sli_cmd_available)) + (pring->lpfc_sli_cmd_available) (phba, pring); + + } + + return; +} + /* * This routine presumes LPFC_FCP_RING handling and doesn't bother * to check it explicitly. @@ -917,24 +1093,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, portRspMax = pring->numRiocb; portRspPut = le32_to_cpu(pgp->rspPutInx); if (unlikely(portRspPut >= portRspMax)) { - /* - * Ring handler: portRspPut is bigger then - * rsp ring - */ - lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "%d:0312 Ring %d handler: portRspPut %d " - "is bigger then rsp ring %d\n", - phba->brd_no, pring->ringno, portRspPut, - portRspMax); - - phba->hba_state = LPFC_HBA_ERROR; - - /* All error attention handlers are posted to worker thread */ - phba->work_ha |= HA_ERATT; - phba->work_hs = HS_FFER3; - if (phba->work_wait) - wake_up(phba->work_wait); - + lpfc_sli_rsp_pointers_error(phba, pring); spin_unlock_irqrestore(phba->host->host_lock, iflag); return 1; } @@ -947,6 +1106,10 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, * network byte order and pci byte orders are different. */ entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx); + + if (++pring->rspidx >= portRspMax) + pring->rspidx = 0; + lpfc_sli_pcimem_bcopy((uint32_t *) entry, (uint32_t *) &rspiocbq.iocb, sizeof (IOCB_t)); @@ -1020,9 +1183,6 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba, * been updated, sync the pgp->rspPutInx and fetch the new port * response put pointer. */ - if (++pring->rspidx >= portRspMax) - pring->rspidx = 0; - to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2) + 1) * 4; writel(pring->rspidx, to_slim); @@ -2615,6 +2775,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, DECLARE_WAIT_QUEUE_HEAD(done_q); long timeleft, timeout_req = 0; int retval = IOCB_SUCCESS; + uint32_t creg_val; /* * If the caller has provided a response iocbq buffer, then context2 @@ -2630,6 +2791,13 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, piocb->context_un.wait_queue = &done_q; piocb->iocb_flag &= ~LPFC_IO_WAKE; + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { + creg_val = readl(phba->HCregaddr); + creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); + writel(creg_val, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + } + retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0); if (retval == IOCB_SUCCESS) { timeout_req = timeout * HZ; @@ -2663,6 +2831,13 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba, retval = IOCB_ERROR; } + if (phba->cfg_poll & DISABLE_FCP_RING_INT) { + creg_val = readl(phba->HCregaddr); + creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING); + writel(creg_val, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + } + if (prspiocbq) piocb->context2 = NULL; -- cgit v1.2.3-70-g09d2 From 445cf4f4d2aa28f6ddd1d7a5f0986341ad61ec91 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:42:38 -0500 Subject: [SCSI] lpfc 8.1.1 : Added code to adjust lun queue depth to avoid target overloading Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 ++- drivers/scsi/lpfc/lpfc_disc.h | 2 ++ drivers/scsi/lpfc/lpfc_scsi.c | 58 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 62 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 1f3873ae9d6..38ffa8d6e62 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -29,9 +29,10 @@ struct lpfc_sli2_slim; #define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */ #define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */ -#define LPFC_CMD_PER_LUN 30 /* max outstanding cmds per lun */ +#define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */ #define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ +#define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ /* Define macros for 64 bit support */ #define putPaddrLow(addr) ((uint32_t) (0xffffffff & (u64)(addr))) diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 084e7628ce1..ed6c81660e0 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -73,6 +73,8 @@ struct lpfc_nodelist { struct lpfc_hba *nlp_phba; struct lpfc_work_evt nodev_timeout_evt; struct lpfc_work_evt els_retry_evt; + unsigned long last_ramp_up_time; /* jiffy of last ramp up */ + unsigned long last_q_full_time; /* jiffy of last queue full */ }; /* Defines for nlp_flag (uint32) */ diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c422220db0a..9ee8218404c 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -409,6 +409,9 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_rport_data *rdata = lpfc_cmd->rdata; struct lpfc_nodelist *pnode = rdata->pnode; struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + int result; + struct scsi_device *sdev, *tmp_sdev; + int depth = 0; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -460,8 +463,63 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, *lp, *(lp + 3), cmd->retries, cmd->resid); } + result = cmd->result; + sdev = cmd->device; cmd->scsi_done(cmd); + if (!result && + ((jiffies - pnode->last_ramp_up_time) > + LPFC_Q_RAMP_UP_INTERVAL * HZ) && + ((jiffies - pnode->last_q_full_time) > + LPFC_Q_RAMP_UP_INTERVAL * HZ) && + (phba->cfg_lun_queue_depth > sdev->queue_depth)) { + shost_for_each_device(tmp_sdev, sdev->host) { + if (phba->cfg_lun_queue_depth > tmp_sdev->queue_depth) { + if (tmp_sdev->id != sdev->id) + continue; + if (tmp_sdev->ordered_tags) + scsi_adjust_queue_depth(tmp_sdev, + MSG_ORDERED_TAG, + tmp_sdev->queue_depth+1); + else + scsi_adjust_queue_depth(tmp_sdev, + MSG_SIMPLE_TAG, + tmp_sdev->queue_depth+1); + + pnode->last_ramp_up_time = jiffies; + } + } + } + + /* + * Check for queue full. If the lun is reporting queue full, then + * back off the lun queue depth to prevent target overloads. + */ + if (result == SAM_STAT_TASK_SET_FULL) { + pnode->last_q_full_time = jiffies; + + shost_for_each_device(tmp_sdev, sdev->host) { + if (tmp_sdev->id != sdev->id) + continue; + depth = scsi_track_queue_full(tmp_sdev, + tmp_sdev->queue_depth - 1); + } + /* + * The queue depth cannot be lowered any more. + * Modify the returned error code to store + * the final depth value set by + * scsi_track_queue_full. + */ + if (depth == -1) + depth = sdev->host->cmd_per_lun; + + if (depth) { + lpfc_printf_log(phba, KERN_WARNING, LOG_FCP, + "%d:0711 detected queue full - lun queue depth " + " adjusted to %d.\n", phba->brd_no, depth); + } + } + lpfc_release_scsi_buf(phba, lpfc_cmd); } -- cgit v1.2.3-70-g09d2 From fefcb2b677fbfce894133e59a34395f8988d4610 Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 15:08:56 -0500 Subject: [SCSI] lpfc 8.1.1 : kill use of pci_read_config_xxx Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index db3c2ad4e94..b7a603a4532 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -763,14 +763,12 @@ static void lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) { lpfc_vpd_t *vp; - uint16_t dev_id; - uint16_t dev_subid; - uint8_t hdrtype; + uint16_t dev_id = phba->pcidev->device; + uint16_t dev_subid = phba->pcidev->subsystem_device; + uint8_t hdrtype = phba->pcidev->hdr_type; char *model_str = ""; vp = &phba->vpd; - pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id); - pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype); switch (dev_id) { case PCI_DEVICE_ID_FIREFLY: @@ -871,8 +869,6 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) break; case PCI_DEVICE_ID_LP11000S: case PCI_DEVICE_ID_LPE11000S: - pci_read_config_word(phba->pcidev, PCI_SUBSYSTEM_ID, - &dev_subid); switch (dev_subid) { case PCI_SUBSYSTEM_ID_LP11000S: model_str = "LP11002-S 4Gb PCI-X2"; -- cgit v1.2.3-70-g09d2 From 1cb25a27d0a3f8296e67e5cc915048db10910d4f Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Mon, 28 Nov 2005 11:42:49 -0500 Subject: [SCSI] lpfc 8.1.1 : Change version number to 8.1.1 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 4f0466fbd5f..fa681a934ff 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.1.0" +#define LPFC_DRIVER_VERSION "8.1.1" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.2.3-70-g09d2 From f78496da6a85f4b5f4532d7bf85b05fa655146a8 Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:14 -0700 Subject: [SCSI] mptfusion - adding = THIS_MODULE Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 1 + drivers/message/fusion/mptsas.c | 1 + drivers/message/fusion/mptspi.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index a628be9bbba..101993f2133 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -84,6 +84,7 @@ static int mptfcTaskCtx = -1; static int mptfcInternalCtx = -1; /* Used only for internal commands */ static struct scsi_host_template mptfc_driver_template = { + .module = THIS_MODULE, .proc_name = "mptfc", .proc_info = mptscsih_proc_info, .name = "MPT FC Host", diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index e0a8bb8ba7d..0e557a3a9d0 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -277,6 +277,7 @@ mptsas_slave_alloc(struct scsi_device *device) } static struct scsi_host_template mptsas_driver_template = { + .module = THIS_MODULE, .proc_name = "mptsas", .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 5c0e307d1d5..9431d386c72 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -103,6 +103,7 @@ static int mptspiTaskCtx = -1; static int mptspiInternalCtx = -1; /* Used only for internal commands */ static struct scsi_host_template mptspi_driver_template = { + .module = THIS_MODULE, .proc_name = "mptspi", .proc_info = mptscsih_proc_info, .name = "MPT SPI Host", -- cgit v1.2.3-70-g09d2 From 7acec1e7556a861416bb6b10f3e3cbb6e82fc01d Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:17 -0700 Subject: [SCSI] mptfusion - cleaning up xxx_probe error handling This cleans the returning failure conditions of the mptsas/mptfc/mptspi probe routines. Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptfc.c | 17 ++++++++++------- drivers/message/fusion/mptsas.c | 17 ++++++++++------- drivers/message/fusion/mptspi.c | 17 ++++++++++------- 3 files changed, 30 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 101993f2133..531664f9e33 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -168,13 +168,15 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptfc_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptfc_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -199,7 +201,8 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptfc_probe; } spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -267,7 +270,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptfc_probe_failed; + goto out_mptfc_probe; } memset(mem, 0, sz); @@ -285,7 +288,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptfc_probe_failed; + goto out_mptfc_probe; } memset(mem, 0, sz); @@ -331,13 +334,13 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) if(error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptfc_probe_failed; + goto out_mptfc_probe; } scsi_scan_host(sh); return 0; -mptfc_probe_failed: +out_mptfc_probe: mptscsih_remove(pdev); return error; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 0e557a3a9d0..282fb5ebbad 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1134,13 +1134,15 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptsas_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptsas_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -1164,7 +1166,8 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptsas_probe; } spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -1238,7 +1241,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptsas_probe_failed; + goto out_mptsas_probe; } memset(mem, 0, sz); @@ -1256,7 +1259,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptsas_probe_failed; + goto out_mptsas_probe; } memset(mem, 0, sz); @@ -1309,14 +1312,14 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptsas_probe_failed; + goto out_mptsas_probe; } mptsas_scan_sas_topology(ioc); return 0; -mptsas_probe_failed: +out_mptsas_probe: mptscsih_remove(pdev); return error; diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 9431d386c72..91bc467477e 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -178,13 +178,15 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping because it's not operational!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptspi_probe; } if (!ioc->active) { printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", ioc->name); - return -ENODEV; + error = -ENODEV; + goto out_mptspi_probe; } /* Sanity check - ensure at least 1 port is INITIATOR capable @@ -209,7 +211,8 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Unable to register controller with SCSI subsystem\n", ioc->name); - return -1; + error = -1; + goto out_mptspi_probe; } spin_lock_irqsave(&ioc->FreeQlock, flags); @@ -287,7 +290,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptspi_probe_failed; + goto out_mptspi_probe; } memset(mem, 0, sz); @@ -305,7 +308,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) mem = kmalloc(sz, GFP_ATOMIC); if (mem == NULL) { error = -ENOMEM; - goto mptspi_probe_failed; + goto out_mptspi_probe; } memset(mem, 0, sz); @@ -386,13 +389,13 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) if(error) { dprintk((KERN_ERR MYNAM "scsi_add_host failed\n")); - goto mptspi_probe_failed; + goto out_mptspi_probe; } scsi_scan_host(sh); return 0; -mptspi_probe_failed: +out_mptspi_probe: mptscsih_remove(pdev); return error; -- cgit v1.2.3-70-g09d2 From a9b2937a1eab2939d0eed3830ead88664ed7445d Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:20 -0700 Subject: [SCSI] mptfusion - bus_type, change SCSI to SPI This changes to SPI for the bus_type enumeration. Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 14 +++++++------- drivers/message/fusion/mptbase.h | 2 +- drivers/message/fusion/mptscsih.c | 30 +++++++++++++++--------------- 3 files changed, 23 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 4262a22adc2..537836068c4 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -313,13 +313,13 @@ mpt_reply(MPT_ADAPTER *ioc, u32 pa) u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); if (ioc->bus_type == FC) mpt_fc_log_info(ioc, log_info); - else if (ioc->bus_type == SCSI) + else if (ioc->bus_type == SPI) mpt_sp_log_info(ioc, log_info); else if (ioc->bus_type == SAS) mpt_sas_log_info(ioc, log_info); } if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SCSI && + if (ioc->bus_type == SPI && cb_idx != mpt_stm_index && cb_idx != mpt_lan_index) mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); @@ -1376,7 +1376,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_53C1030) { ioc->prod_name = "LSI53C1030"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; /* 1030 Chip Fix. Disable Split transactions * for PCIX. Set MOST bits to zero if Rev < C0( = 8). */ @@ -1389,7 +1389,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_1030_53C1035) { ioc->prod_name = "LSI53C1035"; - ioc->bus_type = SCSI; + ioc->bus_type = SPI; } else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) { ioc->prod_name = "LSISAS1064"; @@ -3042,7 +3042,7 @@ mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag) /* Clear the internal flash bad bit - autoincrementing register, * so must do two writes. */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* * 1030 and 1035 H/W errata, workaround to access * the ClearFlashBadSignatureBit @@ -3152,7 +3152,7 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) int cnt,cntdn; dinitprintk((KERN_WARNING MYNAM ": KickStarting %s!\n", ioc->name)); - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { /* Always issue a Msg Unit Reset first. This will clear some * SCSI bus hang conditions. */ @@ -3580,7 +3580,7 @@ initChainBuffers(MPT_ADAPTER *ioc) dinitprintk((KERN_INFO MYNAM ": %s Now numSGE=%d num_sge=%d num_chain=%d\n", ioc->name, numSGE, num_sge, num_chain)); - if (ioc->bus_type == SCSI) + if (ioc->bus_type == SPI) num_chain *= MPT_SCSI_CAN_QUEUE; else num_chain *= MPT_FC_CAN_QUEUE; diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index bac8eb4186d..7a6c1141845 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -903,7 +903,7 @@ typedef struct _MPT_LOCAL_REPLY { typedef enum { FC, - SCSI, + SPI, SAS } BUS_TYPE; diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b7b9846ff3f..2d014248b79 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -677,7 +677,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) sc->result = DID_RESET << 16; /* GEM Workaround. */ - if (ioc->bus_type == SCSI) + if (ioc->bus_type == SPI) mptscsih_no_negotiate(hd, sc->device->id); break; @@ -1403,7 +1403,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) SCpnt->host_scribble = NULL; #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION - if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->bus_type == SPI) { int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id]; int issueCmd = 1; @@ -2183,7 +2183,7 @@ mptscsih_slave_alloc(struct scsi_device *device) vdev->bus_id = device->channel; vdev->raidVolume = 0; hd->Targets[device->id] = vdev; - if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->bus_type == SPI) { if (hd->ioc->raid_data.isRaid & (1 << device->id)) { vdev->raidVolume = 1; ddvtprintk((KERN_INFO @@ -2225,7 +2225,7 @@ mptscsih_slave_destroy(struct scsi_device *device) kfree(hd->Targets[target]); hd->Targets[target] = NULL; - if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->bus_type == SPI) { if (mptscsih_is_phys_disk(hd->ioc, target)) { hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; } else { @@ -2261,7 +2261,7 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) if (!(pTarget = hd->Targets[sdev->id])) return 0; - if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->bus_type == SPI) { if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)) max_depth = 1; @@ -2503,9 +2503,9 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) /* 2. Chain Buffer initialization */ - /* 4. Renegotiate to all devices, if SCSI + /* 4. Renegotiate to all devices, if SPI */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n")); mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM); } @@ -2534,7 +2534,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) /* 7. Set flag to force DV and re-read IOC Page 3 */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; ddvtprintk(("Set reload IOC Pg3 Flag\n")); } @@ -2576,7 +2576,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) break; case MPI_EVENT_IOC_BUS_RESET: /* 04 */ case MPI_EVENT_EXT_BUS_RESET: /* 05 */ - if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1)) + if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1)) hd->soft_resets++; break; case MPI_EVENT_LOGOUT: /* 09 */ @@ -2601,7 +2601,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) (pMpiEventDataRaid_t) pEvReply->Data; #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /* Domain Validation Needed */ - if (ioc->bus_type == SCSI && + if (ioc->bus_type == SPI && pRaidEventData->ReasonCode == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum); @@ -2682,7 +2682,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * indexed_lun = (lun % 32); vdev->luns[lun_index] |= (1 << indexed_lun); - if (hd->ioc->bus_type == SCSI) { + if (hd->ioc->bus_type == SPI) { if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { /* Treat all Processors as SAF-TE if * command line option is set */ @@ -3956,10 +3956,10 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) if (id == hostId) id++; - /* Write SDP1 for all SCSI devices + /* Write SDP1 for all SPI devices * Alloc memory and set up config buffer */ - if (ioc->bus_type == SCSI) { + if (ioc->bus_type == SPI) { if (ioc->spi_data.sdp1length > 0) { pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); @@ -4101,8 +4101,8 @@ mptscsih_domainValidation(void *arg) msleep(250); - /* DV only to SCSI adapters */ - if (ioc->bus_type != SCSI) + /* DV only to SPI adapters */ + if (ioc->bus_type != SPI) continue; /* Make sure everything looks ok */ -- cgit v1.2.3-70-g09d2 From f2ea8671a8376e09cf759aa8cb3de8b8d3bced9e Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:23 -0700 Subject: [SCSI] mptfusion - prep for removing domain validation This moves some functions around from within the #define MPTSCSIH_ENABLE_DOMAIN_VALIDATION area, in preperation for generic domain validation. Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptscsih.c | 225 +++++++++++++++++++------------------- 1 file changed, 114 insertions(+), 111 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 2d014248b79..a5ca7494c8c 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -152,7 +152,6 @@ int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen); static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56); -static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq); static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags); static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id); static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags); @@ -160,18 +159,19 @@ static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus); int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); +static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); static struct work_struct mptscsih_persistTask; #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io); static void mptscsih_domainValidation(void *hd); -static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id); static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); static void mptscsih_fillbuf(char *buffer, int size, int index, int width); static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id); +static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq); #endif void mptscsih_remove(struct pci_dev *); @@ -993,8 +993,10 @@ mptscsih_remove(struct pci_dev *pdev) MPT_ADAPTER *ioc = pci_get_drvdata(pdev); struct Scsi_Host *host = ioc->sh; MPT_SCSI_HOST *hd; +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION int count; unsigned long flags; +#endif int sz1; if(!host) { @@ -2597,9 +2599,9 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) case MPI_EVENT_INTEGRATED_RAID: /* 0B */ { +#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION pMpiEventDataRaid_t pRaidEventData = (pMpiEventDataRaid_t) pEvReply->Data; -#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /* Domain Validation Needed */ if (ioc->bus_type == SPI && pRaidEventData->ReasonCode == @@ -2925,94 +2927,6 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) } } -/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return. - * Else set the NEED_DV flag after Read Capacity Issued (disks) - * or Mode Sense (cdroms). - * - * Tapes, initTarget will set this flag on completion of Inquiry command. - * Called only if DV_NOT_DONE flag is set - */ -static void -mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) -{ - MPT_ADAPTER *ioc = hd->ioc; - u8 cmd; - SpiCfgData *pSpi; - - ddvtprintk((MYIOC_s_NOTE_FMT - " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", - hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); - - if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) - return; - - cmd = pReq->CDB[0]; - - if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { - pSpi = &ioc->spi_data; - if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) { - /* Set NEED_DV for all hidden disks - */ - Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; - int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; - - while (numPDisk) { - pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); - pPDisk++; - numPDisk--; - } - } - pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID)); - } -} - -/* mptscsih_raid_set_dv_flags() - * - * New or replaced disk. Set DV flag and schedule DV. - */ -static void -mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) -{ - MPT_ADAPTER *ioc = hd->ioc; - SpiCfgData *pSpi = &ioc->spi_data; - Ioc3PhysDisk_t *pPDisk; - int numPDisk; - - if (hd->negoNvram != 0) - return; - - ddvtprintk(("DV requested for phys disk id %d\n", id)); - if (ioc->raid_data.pIocPg3) { - pPDisk = ioc->raid_data.pIocPg3->PhysDisk; - numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; - while (numPDisk) { - if (id == pPDisk->PhysDiskNum) { - pSpi->dvStatus[pPDisk->PhysDiskID] = - (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); - pSpi->forceDv = MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for phys disk id %d\n", - pPDisk->PhysDiskID)); - break; - } - pPDisk++; - numPDisk--; - } - - if (numPDisk == 0) { - /* The physical disk that needs DV was not found - * in the stored IOC Page 3. The driver must reload - * this page. DV routine will set the NEED_DV flag for - * all phys disks that have DV_NOT_DONE set. - */ - pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; - ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id)); - } - } -} - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * If no Target, bus reset on 1st I/O. Set the flag to @@ -4052,6 +3966,26 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) return 0; } +/* Search IOC page 3 to determine if this is hidden physical disk + */ +/* Search IOC page 3 to determine if this is hidden physical disk + */ +static int +mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) +{ + int i; + + if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3) + return 0; + + for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { + if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) + return 1; + } + + return 0; +} + #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** @@ -4205,26 +4139,6 @@ mptscsih_domainValidation(void *arg) return; } -/* Search IOC page 3 to determine if this is hidden physical disk - */ -/* Search IOC page 3 to determine if this is hidden physical disk - */ -static int -mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) -{ - int i; - - if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3) - return 0; - - for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { - if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) - return 1; - } - - return 0; -} - /* Write SDP1 if no QAS has been enabled */ static void @@ -5588,6 +5502,95 @@ mptscsih_fillbuf(char *buffer, int size, int index, int width) break; } } + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return. + * Else set the NEED_DV flag after Read Capacity Issued (disks) + * or Mode Sense (cdroms). + * + * Tapes, initTarget will set this flag on completion of Inquiry command. + * Called only if DV_NOT_DONE flag is set + */ +static void +mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) +{ + MPT_ADAPTER *ioc = hd->ioc; + u8 cmd; + SpiCfgData *pSpi; + + ddvtprintk((MYIOC_s_NOTE_FMT + " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", + hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); + + if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) + return; + + cmd = pReq->CDB[0]; + + if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { + pSpi = &ioc->spi_data; + if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) { + /* Set NEED_DV for all hidden disks + */ + Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; + + while (numPDisk) { + pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); + pPDisk++; + numPDisk--; + } + } + pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID)); + } +} + +/* mptscsih_raid_set_dv_flags() + * + * New or replaced disk. Set DV flag and schedule DV. + */ +static void +mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) +{ + MPT_ADAPTER *ioc = hd->ioc; + SpiCfgData *pSpi = &ioc->spi_data; + Ioc3PhysDisk_t *pPDisk; + int numPDisk; + + if (hd->negoNvram != 0) + return; + + ddvtprintk(("DV requested for phys disk id %d\n", id)); + if (ioc->raid_data.pIocPg3) { + pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; + while (numPDisk) { + if (id == pPDisk->PhysDiskNum) { + pSpi->dvStatus[pPDisk->PhysDiskID] = + (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); + pSpi->forceDv = MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", + pPDisk->PhysDiskID)); + break; + } + pPDisk++; + numPDisk--; + } + + if (numPDisk == 0) { + /* The physical disk that needs DV was not found + * in the stored IOC Page 3. The driver must reload + * this page. DV routine will set the NEED_DV flag for + * all phys disks that have DV_NOT_DONE set. + */ + pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; + ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id)); + } + } +} + #endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ EXPORT_SYMBOL(mptscsih_remove); -- cgit v1.2.3-70-g09d2 From c7c82987b4844f555d309ccbd42abe95d46822ff Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:25 -0700 Subject: [SCSI] mptfusion - mapping fixs required support for transport layers. This utilizes the hostdata area that is hung off of scsi_target and scsi_device for saving unique firmware mapping. This will be required for supporting new Fibre and SPI transport support. This also fixs problems in error handling error code for SAS controllers, in which the incorrect mapping was passed to the firmware. Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 28 +- drivers/message/fusion/mptctl.c | 4 +- drivers/message/fusion/mptfc.c | 6 +- drivers/message/fusion/mptsas.c | 37 +- drivers/message/fusion/mptscsih.c | 745 +++++++++++++++++++------------------- drivers/message/fusion/mptscsih.h | 2 + drivers/message/fusion/mptspi.c | 6 +- 7 files changed, 411 insertions(+), 417 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 7a6c1141845..2a46b33fa76 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -321,7 +321,7 @@ typedef struct _SYSIF_REGS * Dynamic Multi-Pathing specific stuff... */ -/* VirtDevice negoFlags field */ +/* VirtTarget negoFlags field */ #define MPT_TARGET_NO_NEGO_WIDE 0x01 #define MPT_TARGET_NO_NEGO_SYNC 0x02 #define MPT_TARGET_NO_NEGO_QAS 0x04 @@ -330,8 +330,7 @@ typedef struct _SYSIF_REGS /* * VirtDevice - FC LUN device or SCSI target device */ -typedef struct _VirtDevice { - struct scsi_device *device; +typedef struct _VirtTarget { u8 tflags; u8 ioc_id; u8 target_id; @@ -342,21 +341,18 @@ typedef struct _VirtDevice { u8 negoFlags; /* bit field, see above */ u8 raidVolume; /* set, if RAID Volume */ u8 type; /* byte 0 of Inquiry data */ - u8 cflags; /* controller flags */ - u8 rsvd1raid; - u16 fc_phys_lun; - u16 fc_xlat_lun; u32 num_luns; u32 luns[8]; /* Max LUNs is 256 */ - u8 pad[4]; u8 inq_data[8]; - /* IEEE Registered Extended Identifier - obtained via INQUIRY VPD page 0x83 */ - /* NOTE: Do not separate uniq_prepad and uniq_data - as they are treateed as a single entity in the code */ - u8 uniq_prepad[8]; - u8 uniq_data[20]; - u8 pad2[4]; +} VirtTarget; + +typedef struct _VirtDevice { + VirtTarget *vtarget; + u8 ioc_id; + u8 bus_id; + u8 target_id; + u8 configured_lun; + u32 lun; } VirtDevice; /* @@ -912,7 +908,7 @@ typedef struct _MPT_SCSI_HOST { int port; u32 pad0; struct scsi_cmnd **ScsiLookup; - VirtDevice **Targets; + VirtTarget **Targets; MPT_LOCAL_REPLY *pLocal; /* used for internal commands */ struct timer_list timer; /* Pool of memory for holding SCpnts before doing diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 602138f8544..959d2c5951b 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -1245,7 +1245,7 @@ mptctl_gettargetinfo (unsigned long arg) MPT_ADAPTER *ioc; struct Scsi_Host *sh; MPT_SCSI_HOST *hd; - VirtDevice *vdev; + VirtTarget *vdev; char *pmem; int *pdata; IOCPage2_t *pIoc2; @@ -1822,7 +1822,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr) case MPI_FUNCTION_SCSI_IO_REQUEST: if (ioc->sh) { SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf; - VirtDevice *pTarget = NULL; + VirtTarget *pTarget = NULL; MPT_SCSI_HOST *hd = NULL; int qtag = MPI_SCSIIO_CONTROL_UNTAGGED; int scsidir = 0; diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 531664f9e33..ba61e182885 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -90,8 +90,10 @@ static struct scsi_host_template mptfc_driver_template = { .name = "MPT FC Host", .info = mptscsih_info, .queuecommand = mptscsih_qcmd, + .target_alloc = mptscsih_target_alloc, .slave_alloc = mptscsih_slave_alloc, .slave_configure = mptscsih_slave_configure, + .target_destroy = mptscsih_target_destroy, .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -292,10 +294,10 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) } memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; + hd->Targets = (VirtTarget **) mem; dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + " vdev @ %p, sz=%d\n", hd->Targets, sz)); /* Clear the TM flags */ diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 282fb5ebbad..17e9757e728 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -228,31 +228,35 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) * implement ->target_alloc. */ static int -mptsas_slave_alloc(struct scsi_device *device) +mptsas_slave_alloc(struct scsi_device *sdev) { - struct Scsi_Host *host = device->host; + struct Scsi_Host *host = sdev->host; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; struct sas_rphy *rphy; struct mptsas_portinfo *p; + VirtTarget *vtarget; VirtDevice *vdev; - uint target = device->id; + struct scsi_target *starget; int i; - if ((vdev = hd->Targets[target]) != NULL) - goto out; - vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL); if (!vdev) { printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", hd->ioc->name, sizeof(VirtDevice)); return -ENOMEM; } - memset(vdev, 0, sizeof(VirtDevice)); - vdev->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; vdev->ioc_id = hd->ioc->id; + sdev->hostdata = vdev; + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdev->vtarget = vtarget; + if (vtarget->num_luns == 0) { + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY; + hd->Targets[sdev->id] = vtarget; + } - rphy = dev_to_rphy(device->sdev_target->dev.parent); + rphy = dev_to_rphy(sdev->sdev_target->dev.parent); list_for_each_entry(p, &hd->ioc->sas_topology, list) { for (i = 0; i < p->num_phys; i++) { if (p->phy_info[i].attached.sas_address == @@ -260,7 +264,7 @@ mptsas_slave_alloc(struct scsi_device *device) vdev->target_id = p->phy_info[i].attached.target; vdev->bus_id = p->phy_info[i].attached.bus; - hd->Targets[device->id] = vdev; + vdev->lun = sdev->lun; goto out; } } @@ -271,8 +275,10 @@ mptsas_slave_alloc(struct scsi_device *device) return -ENODEV; out: - vdev->num_luns++; - device->hostdata = vdev; + vtarget->ioc_id = vdev->ioc_id; + vtarget->target_id = vdev->target_id; + vtarget->bus_id = vdev->bus_id; + vtarget->num_luns++; return 0; } @@ -283,8 +289,10 @@ static struct scsi_host_template mptsas_driver_template = { .name = "MPT SPI Host", .info = mptscsih_info, .queuecommand = mptscsih_qcmd, + .target_alloc = mptscsih_target_alloc, .slave_alloc = mptsas_slave_alloc, .slave_configure = mptscsih_slave_configure, + .target_destroy = mptscsih_target_destroy, .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -987,7 +995,6 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) goto out_free_port_info; list_add_tail(&port_info->list, &ioc->sas_topology); - for (i = 0; i < port_info->num_phys; i++) { mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << @@ -1263,10 +1270,10 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) } memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; + hd->Targets = (VirtTarget **) mem; dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + " vtarget @ %p, sz=%d\n", hd->Targets, sz)); /* Clear the TM flags */ diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index a5ca7494c8c..93a16fa3c4b 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -150,15 +150,16 @@ static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 tar int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply); -static void mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen); -static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56); +static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen); +static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, char byte56); static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags); -static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id); +static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc); static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags); static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus); int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r); static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); -static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); +static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice); +static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget); static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id); static struct work_struct mptscsih_persistTask; @@ -171,7 +172,7 @@ static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); static void mptscsih_fillbuf(char *buffer, int size, int index, int width); static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id); -static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq); +static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc); #endif void mptscsih_remove(struct pci_dev *); @@ -627,7 +628,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n" "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n" "resid=%d bufflen=%d xfer_cnt=%d\n", - ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], + ioc->id, sc->device->id, sc->device->lun, status, scsi_state, scsi_status, sc->resid, sc->request_bufflen, xfer_cnt)); @@ -641,7 +642,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) pScsiReply->ResponseInfo) { printk(KERN_NOTICE "ha=%d id=%d lun=%d: " "FCP_ResponseInfo=%08xh\n", - ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], + ioc->id, sc->device->id, sc->device->lun, le32_to_cpu(pScsiReply->ResponseInfo)); } @@ -678,7 +679,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) /* GEM Workaround. */ if (ioc->bus_type == SPI) - mptscsih_no_negotiate(hd, sc->device->id); + mptscsih_no_negotiate(hd, sc); break; case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ @@ -892,16 +893,15 @@ mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd) * when a lun is disable by mid-layer. * Do NOT access the referenced scsi_cmnd structure or * members. Will cause either a paging or NULL ptr error. - * @hd: Pointer to a SCSI HOST structure - * @target: target id - * @lun: lun + * @hd: Pointer to a SCSI HOST structure + * @vdevice: per device private data * * Returns: None. * * Called from slave_destroy. */ static void -mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) +mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice) { SCSIIORequest_t *mf = NULL; int ii; @@ -909,7 +909,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) struct scsi_cmnd *sc; dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n", - target, lun, max)); + vdevice->target_id, vdevice->lun, max)); for (ii=0; ii < max; ii++) { if ((sc = hd->ScsiLookup[ii]) != NULL) { @@ -919,7 +919,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n", hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1])); - if ((mf->TargetID != ((u8)target)) || (mf->LUN[1] != ((u8) lun))) + if ((mf->TargetID != ((u8)vdevice->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun))) continue; /* Cleanup @@ -996,7 +996,7 @@ mptscsih_remove(struct pci_dev *pdev) #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION int count; unsigned long flags; -#endif +#endif int sz1; if(!host) { @@ -1077,11 +1077,6 @@ mptscsih_shutdown(struct pci_dev *pdev) hd = (MPT_SCSI_HOST *)host->hostdata; - /* Flush the cache of this adapter - */ - if(hd != NULL) - mptscsih_synchronize_cache(hd, 0); - } #ifdef CONFIG_PM @@ -1288,7 +1283,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) MPT_SCSI_HOST *hd; MPT_FRAME_HDR *mf; SCSIIORequest_t *pScsiReq; - VirtDevice *pTarget = SCpnt->device->hostdata; + VirtDevice *vdev = SCpnt->device->hostdata; int lun; u32 datalen; u32 scsictl; @@ -1343,8 +1338,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Default to untagged. Once a target structure has been allocated, * use the Inquiry data to determine if device supports tagged. */ - if (pTarget - && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + if (vdev + && (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) && (SCpnt->device->tagged_supported)) { scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ; } else { @@ -1353,8 +1348,8 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Use the above information to set up the message frame */ - pScsiReq->TargetID = (u8) pTarget->target_id; - pScsiReq->Bus = pTarget->bus_id; + pScsiReq->TargetID = (u8) vdev->target_id; + pScsiReq->Bus = vdev->bus_id; pScsiReq->ChainOffset = 0; pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST; pScsiReq->CDBLength = SCpnt->cmd_len; @@ -1406,7 +1401,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION if (hd->ioc->bus_type == SPI) { - int dvStatus = hd->ioc->spi_data.dvStatus[pTarget->target_id]; + int dvStatus = hd->ioc->spi_data.dvStatus[vdev->target_id]; int issueCmd = 1; if (dvStatus || hd->ioc->spi_data.forceDv) { @@ -1439,7 +1434,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) /* Set the DV flags. */ if (dvStatus & MPT_SCSICFG_DV_NOT_DONE) - mptscsih_set_dvflags(hd, pScsiReq); + mptscsih_set_dvflags(hd, SCpnt); if (!issueCmd) goto fail; @@ -1743,6 +1738,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) u32 ctx2abort; int scpnt_idx; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1792,8 +1788,9 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) hd->abortSCpnt = SCpnt; + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, - SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, + vdev->bus_id, vdev->target_id, vdev->lun, ctx2abort, 2 /* 2 second timeout */); printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n", @@ -1824,6 +1821,7 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1841,8 +1839,9 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) hd->ioc->name, SCpnt); scsi_print_command(SCpnt); + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, - SCpnt->device->channel, SCpnt->device->id, + vdev->bus_id, vdev->target_id, 0, 0, 5 /* 5 second timeout */); printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n", @@ -1873,6 +1872,7 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; int retval; + VirtDevice *vdev; /* If we can't locate our host adapter structure, return FAILED status. */ @@ -1890,8 +1890,9 @@ mptscsih_bus_reset(struct scsi_cmnd * SCpnt) if (hd->timeouts < -1) hd->timeouts++; + vdev = SCpnt->device->hostdata; retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, - SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */); + vdev->bus_id, 0, 0, 0, 5 /* 5 second timeout */); printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n", hd->ioc->name, @@ -2150,26 +2151,39 @@ mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, return 0; } +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * OS entry point to allow host driver to alloc memory + * for each scsi target. Called once per device the bus scan. + * Return non-zero if allocation fails. + */ +int +mptscsih_target_alloc(struct scsi_target *starget) +{ + VirtTarget *vtarget; + + vtarget = kmalloc(sizeof(VirtTarget), GFP_KERNEL); + if (!vtarget) + return -ENOMEM; + memset(vtarget, 0, sizeof(VirtTarget)); + starget->hostdata = vtarget; + return 0; +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * OS entry point to allow host driver to alloc memory * for each scsi device. Called once per device the bus scan. * Return non-zero if allocation fails. - * Init memory once per id (not LUN). */ int -mptscsih_slave_alloc(struct scsi_device *device) +mptscsih_slave_alloc(struct scsi_device *sdev) { - struct Scsi_Host *host = device->host; + struct Scsi_Host *host = sdev->host; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtTarget *vtarget; VirtDevice *vdev; - uint target = device->id; - - if (hd == NULL) - return -ENODEV; - - if ((vdev = hd->Targets[target]) != NULL) - goto out; + struct scsi_target *starget; vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL); if (!vdev) { @@ -2179,25 +2193,33 @@ mptscsih_slave_alloc(struct scsi_device *device) } memset(vdev, 0, sizeof(VirtDevice)); - vdev->tflags = MPT_TARGET_FLAGS_Q_YES; vdev->ioc_id = hd->ioc->id; - vdev->target_id = device->id; - vdev->bus_id = device->channel; - vdev->raidVolume = 0; - hd->Targets[device->id] = vdev; - if (hd->ioc->bus_type == SPI) { - if (hd->ioc->raid_data.isRaid & (1 << device->id)) { - vdev->raidVolume = 1; - ddvtprintk((KERN_INFO - "RAID Volume @ id %d\n", device->id)); + vdev->target_id = sdev->id; + vdev->bus_id = sdev->channel; + vdev->lun = sdev->lun; + sdev->hostdata = vdev; + + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdev->vtarget = vtarget; + + if (vtarget->num_luns == 0) { + hd->Targets[sdev->id] = vtarget; + vtarget->ioc_id = hd->ioc->id; + vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; + vtarget->target_id = sdev->id; + vtarget->bus_id = sdev->channel; + if (hd->ioc->bus_type == SPI) { + if (hd->ioc->raid_data.isRaid & (1 << sdev->id)) { + vtarget->raidVolume = 1; + ddvtprintk((KERN_INFO + "RAID Volume @ id %d\n", sdev->id)); + } + } else { + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; } - } else { - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; } - - out: - vdev->num_luns++; - device->hostdata = vdev; + vtarget->num_luns++; return 0; } @@ -2206,40 +2228,52 @@ mptscsih_slave_alloc(struct scsi_device *device) * Called if no device present or device being unloaded */ void -mptscsih_slave_destroy(struct scsi_device *device) +mptscsih_target_destroy(struct scsi_target *starget) { - struct Scsi_Host *host = device->host; - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; - VirtDevice *vdev; - uint target = device->id; - uint lun = device->lun; - - if (hd == NULL) - return; - - mptscsih_search_running_cmds(hd, target, lun); - - vdev = hd->Targets[target]; - vdev->luns[0] &= ~(1 << lun); - if (--vdev->num_luns) - return; - - kfree(hd->Targets[target]); - hd->Targets[target] = NULL; - - if (hd->ioc->bus_type == SPI) { - if (mptscsih_is_phys_disk(hd->ioc, target)) { - hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; - } else { - hd->ioc->spi_data.dvStatus[target] = - MPT_SCSICFG_NEGOTIATE; + if (starget->hostdata) + kfree(starget->hostdata); + starget->hostdata = NULL; +} - if (!hd->negoNvram) { - hd->ioc->spi_data.dvStatus[target] |= - MPT_SCSICFG_DV_NOT_DONE; +/* + * OS entry point to allow for host driver to free allocated memory + * Called if no device present or device being unloaded + */ +void +mptscsih_slave_destroy(struct scsi_device *sdev) +{ + struct Scsi_Host *host = sdev->host; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; + VirtTarget *vtarget; + VirtDevice *vdevice; + struct scsi_target *starget; + + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdevice = sdev->hostdata; + + mptscsih_search_running_cmds(hd, vdevice); + vtarget->luns[0] &= ~(1 << vdevice->lun); + vtarget->num_luns--; + if (vtarget->num_luns == 0) { + mptscsih_negotiate_to_asyn_narrow(hd, vtarget); + if (hd->ioc->bus_type == SPI) { + if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) { + hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; + } else { + hd->ioc->spi_data.dvStatus[vtarget->target_id] = + MPT_SCSICFG_NEGOTIATE; + if (!hd->negoNvram) { + hd->ioc->spi_data.dvStatus[vtarget->target_id] |= + MPT_SCSICFG_DV_NOT_DONE; + } } } + hd->Targets[sdev->id] = NULL; } + mptscsih_synchronize_cache(hd, vdevice); + kfree(vdevice); + sdev->hostdata = NULL; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2253,22 +2287,21 @@ mptscsih_slave_destroy(struct scsi_device *device) int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) { - MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; - VirtDevice *pTarget; - int max_depth; - int tagged; + MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata; + VirtTarget *vtarget; + struct scsi_target *starget; + int max_depth; + int tagged; - if (hd == NULL) - return 0; - if (!(pTarget = hd->Targets[sdev->id])) - return 0; + starget = scsi_target(sdev); + vtarget = starget->hostdata; if (hd->ioc->bus_type == SPI) { - if (pTarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { - if (!(pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)) + if (vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) { + if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)) max_depth = 1; - else if (((pTarget->inq_data[0] & 0x1f) == 0x00) && - (pTarget->minSyncFactor <= MPT_ULTRA160 )) + else if (((vtarget->inq_data[0] & 0x1f) == 0x00) && + (vtarget->minSyncFactor <= MPT_ULTRA160 )) max_depth = MPT_SCSI_CMD_PER_DEV_HIGH; else max_depth = MPT_SCSI_CMD_PER_DEV_LOW; @@ -2297,64 +2330,58 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth) * Return non-zero if fails. */ int -mptscsih_slave_configure(struct scsi_device *device) +mptscsih_slave_configure(struct scsi_device *sdev) { - struct Scsi_Host *sh = device->host; - VirtDevice *pTarget; + struct Scsi_Host *sh = sdev->host; + VirtTarget *vtarget; + VirtDevice *vdevice; + struct scsi_target *starget; MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata; + int indexed_lun, lun_index; - if ((hd == NULL) || (hd->Targets == NULL)) { - return 0; - } + starget = scsi_target(sdev); + vtarget = starget->hostdata; + vdevice = sdev->hostdata; dsprintk((MYIOC_s_INFO_FMT "device @ %p, id=%d, LUN=%d, channel=%d\n", - hd->ioc->name, device, device->id, device->lun, device->channel)); - dsprintk((MYIOC_s_INFO_FMT - "sdtr %d wdtr %d ppr %d inq length=%d\n", - hd->ioc->name, device->sdtr, device->wdtr, - device->ppr, device->inquiry_len)); - - if (device->id > sh->max_id) { + hd->ioc->name, sdev, sdev->id, sdev->lun, sdev->channel)); + if (hd->ioc->bus_type == SPI) + dsprintk((MYIOC_s_INFO_FMT + "sdtr %d wdtr %d ppr %d inq length=%d\n", + hd->ioc->name, sdev->sdtr, sdev->wdtr, + sdev->ppr, sdev->inquiry_len)); + + if (sdev->id > sh->max_id) { /* error case, should never happen */ - scsi_adjust_queue_depth(device, 0, 1); - goto slave_configure_exit; - } - - pTarget = hd->Targets[device->id]; - - if (pTarget == NULL) { - /* Driver doesn't know about this device. - * Kernel may generate a "Dummy Lun 0" which - * may become a real Lun if a - * "scsi add-single-device" command is executed - * while the driver is active (hot-plug a - * device). LSI Raid controllers need - * queue_depth set to DEV_HIGH for this reason. - */ - scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG, - MPT_SCSI_CMD_PER_DEV_HIGH); + scsi_adjust_queue_depth(sdev, 0, 1); goto slave_configure_exit; } - mptscsih_initTarget(hd, device->channel, device->id, device->lun, - device->inquiry, device->inquiry_len ); - mptscsih_change_queue_depth(device, MPT_SCSI_CMD_PER_DEV_HIGH); + vdevice->configured_lun=1; + lun_index = (vdevice->lun >> 5); /* 32 luns per lun_index */ + indexed_lun = (vdevice->lun % 32); + vtarget->luns[lun_index] |= (1 << indexed_lun); + mptscsih_initTarget(hd, vtarget, sdev->lun, sdev->inquiry, + sdev->inquiry_len ); + mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); dsprintk((MYIOC_s_INFO_FMT "Queue depth=%d, tflags=%x\n", - hd->ioc->name, device->queue_depth, pTarget->tflags)); + hd->ioc->name, sdev->queue_depth, vtarget->tflags)); - dsprintk((MYIOC_s_INFO_FMT - "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", - hd->ioc->name, pTarget->negoFlags, pTarget->maxOffset, pTarget->minSyncFactor)); + if (hd->ioc->bus_type == SPI) + dsprintk((MYIOC_s_INFO_FMT + "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n", + hd->ioc->name, vtarget->negoFlags, vtarget->maxOffset, + vtarget->minSyncFactor)); slave_configure_exit: dsprintk((MYIOC_s_INFO_FMT "tagged %d, simple %d, ordered %d\n", - hd->ioc->name,device->tagged_supported, device->simple_tags, - device->ordered_tags)); + hd->ioc->name,sdev->tagged_supported, sdev->simple_tags, + sdev->ordered_tags)); return 0; } @@ -2372,16 +2399,14 @@ slave_configure_exit: static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply) { - VirtDevice *target; + VirtDevice *vdev; SCSIIORequest_t *pReq; u32 sense_count = le32_to_cpu(pScsiReply->SenseCount); - int index; /* Get target structure */ pReq = (SCSIIORequest_t *) mf; - index = (int) pReq->TargetID; - target = hd->Targets[index]; + vdev = sc->device->hostdata; if (sense_count) { u8 *sense_data; @@ -2395,7 +2420,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /* Log SMART data (asc = 0x5D, non-IM case only) if required. */ if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) { - if ((sense_data[12] == 0x5D) && (target->raidVolume == 0)) { + if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) { int idx; MPT_ADAPTER *ioc = hd->ioc; @@ -2405,7 +2430,7 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR ioc->events[idx].data[0] = (pReq->LUN[1] << 24) || (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) || - (pReq->Bus << 8) || pReq->TargetID; + (sc->device->channel << 8) || sc->device->id; ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12]; @@ -2634,8 +2659,7 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) /* * mptscsih_initTarget - Target, LUN alloc/free functionality. * @hd: Pointer to MPT_SCSI_HOST structure - * @bus_id: Bus number (?) - * @target_id: SCSI target id + * @vtarget: per target private data * @lun: SCSI LUN id * @data: Pointer to data * @dlen: Number of INQUIRY bytes @@ -2648,15 +2672,14 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) * */ static void -mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *data, int dlen) +mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen) { - int indexed_lun, lun_index; - VirtDevice *vdev; SpiCfgData *pSpi; char data_56; + int inq_len; dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n", - hd->ioc->name, bus_id, target_id, lun, hd)); + hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd)); /* * If the peripheral qualifier filter is enabled then if the target reports a 0x1 @@ -2676,75 +2699,68 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * if (data[0] & 0xe0) return; - if ((vdev = hd->Targets[target_id]) == NULL) { + if (vtarget == NULL) return; - } - lun_index = (lun >> 5); /* 32 luns per lun_index */ - indexed_lun = (lun % 32); - vdev->luns[lun_index] |= (1 << indexed_lun); + if (data) + vtarget->type = data[0]; - if (hd->ioc->bus_type == SPI) { - if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { - /* Treat all Processors as SAF-TE if - * command line option is set */ - vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; - mptscsih_writeIOCPage4(hd, target_id, bus_id); - }else if ((data[0] == TYPE_PROCESSOR) && - !(vdev->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { - if ( dlen > 49 ) { - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - if ( data[44] == 'S' && - data[45] == 'A' && - data[46] == 'F' && - data[47] == '-' && - data[48] == 'T' && - data[49] == 'E' ) { - vdev->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; - mptscsih_writeIOCPage4(hd, target_id, bus_id); - } + if (hd->ioc->bus_type != SPI) + return; + + if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { + /* Treat all Processors as SAF-TE if + * command line option is set */ + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id); + }else if ((data[0] == TYPE_PROCESSOR) && + !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { + if ( dlen > 49 ) { + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; + if ( data[44] == 'S' && + data[45] == 'A' && + data[46] == 'F' && + data[47] == '-' && + data[48] == 'T' && + data[49] == 'E' ) { + vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; + mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id); } } - if (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) { - if ( dlen > 8 ) { - memcpy (vdev->inq_data, data, 8); - } else { - memcpy (vdev->inq_data, data, dlen); - } + } + if (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) { + inq_len = dlen < 8 ? dlen : 8; + memcpy (vtarget->inq_data, data, inq_len); + /* If have not done DV, set the DV flag. + */ + pSpi = &hd->ioc->spi_data; + if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) { + if (pSpi->dvStatus[vtarget->target_id] & MPT_SCSICFG_DV_NOT_DONE) + pSpi->dvStatus[vtarget->target_id] |= MPT_SCSICFG_NEED_DV; + } + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - /* If have not done DV, set the DV flag. + data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */ + if (dlen > 56) { + if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities */ - pSpi = &hd->ioc->spi_data; - if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) { - if (pSpi->dvStatus[target_id] & MPT_SCSICFG_DV_NOT_DONE) - pSpi->dvStatus[target_id] |= MPT_SCSICFG_NEED_DV; - } - - vdev->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY; - - - data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */ - if (dlen > 56) { - if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { - /* Update the target capabilities - */ - data_56 = data[56]; - vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; - } + data_56 = data[56]; + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56; } - mptscsih_setTargetNegoParms(hd, vdev, data_56); - } else { - /* Initial Inquiry may not request enough data bytes to - * obtain byte 57. DV will; if target doesn't return - * at least 57 bytes, data[56] will be zero. */ - if (dlen > 56) { - if ( (!(vdev->tflags & MPT_TARGET_FLAGS_VALID_56))) { - /* Update the target capabilities - */ - data_56 = data[56]; - vdev->tflags |= MPT_TARGET_FLAGS_VALID_56; - mptscsih_setTargetNegoParms(hd, vdev, data_56); - } + } + mptscsih_setTargetNegoParms(hd, vtarget, data_56); + } else { + /* Initial Inquiry may not request enough data bytes to + * obtain byte 57. DV will; if target doesn't return + * at least 57 bytes, data[56] will be zero. */ + if (dlen > 56) { + if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) { + /* Update the target capabilities + */ + data_56 = data[56]; + vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56; + mptscsih_setTargetNegoParms(hd, vtarget, data_56); } } } @@ -2757,12 +2773,12 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * * */ static void -mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) +mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56) { SpiCfgData *pspi_data = &hd->ioc->spi_data; int id = (int) target->target_id; int nvram; - VirtDevice *vdev; + VirtTarget *vtarget; int ii; u8 width = MPT_NARROW; u8 factor = MPT_ASYNC; @@ -2907,9 +2923,9 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id)); for (ii = 0; ii < id; ii++) { - if ( (vdev = hd->Targets[ii]) ) { - vdev->negoFlags |= MPT_TARGET_NO_NEGO_QAS; - mptscsih_writeSDP1(hd, 0, ii, vdev->negoFlags); + if ( (vtarget = hd->Targets[ii]) ) { + vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + mptscsih_writeSDP1(hd, 0, ii, vtarget->negoFlags); } } } @@ -2933,12 +2949,12 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) * prevent any future negotiations to this device. */ static void -mptscsih_no_negotiate(MPT_SCSI_HOST *hd, int target_id) +mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc) { + VirtDevice *vdev; - if ((hd->Targets) && (hd->Targets[target_id] == NULL)) - hd->ioc->spi_data.dvStatus[target_id] |= MPT_SCSICFG_BLK_NEGO; - + if ((vdev = sc->device->hostdata) != NULL) + hd->ioc->spi_data.dvStatus[vdev->target_id] |= MPT_SCSICFG_BLK_NEGO; return; } @@ -3014,7 +3030,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) MPT_ADAPTER *ioc = hd->ioc; Config_t *pReq; SCSIDevicePage1_t *pData; - VirtDevice *pTarget=NULL; + VirtTarget *vtarget=NULL; MPT_FRAME_HDR *mf; dma_addr_t dataDma; u16 req_idx; @@ -3094,11 +3110,11 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) /* If id is not a raid volume, get the updated * transmission settings from the target structure. */ - if (hd->Targets && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { - width = pTarget->maxWidth; - factor = pTarget->minSyncFactor; - offset = pTarget->maxOffset; - negoFlags = pTarget->negoFlags; + if (hd->Targets && (vtarget = hd->Targets[id]) && !vtarget->raidVolume) { + width = vtarget->maxWidth; + factor = vtarget->minSyncFactor; + offset = vtarget->maxOffset; + negoFlags = vtarget->negoFlags; } #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION @@ -3818,152 +3834,122 @@ mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. - * @hd: Pointer to MPT_SCSI_HOST structure - * @portnum: IOC port number + * mptscsih_negotiate_to_asyn_narrow - Restore devices to default state + * @hd: Pointer to a SCSI HOST structure + * @vtarget: per device private data * * Uses the ISR, but with special processing. * MUST be single-threaded. * - * Return: 0 on completion */ -static int -mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) +static void +mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget) { MPT_ADAPTER *ioc= hd->ioc; - VirtDevice *pTarget; - SCSIDevicePage1_t *pcfg1Data = NULL; - INTERNAL_CMD iocmd; + SCSIDevicePage1_t *pcfg1Data; CONFIGPARMS cfg; - dma_addr_t cfg1_dma_addr = -1; - ConfigPageHeader_t header1; - int bus = 0; - int id = 0; - int lun; - int indexed_lun, lun_index; - int hostId = ioc->pfacts[portnum].PortSCSIID; - int max_id; - int requested, configuration, data; - int doConfig = 0; + dma_addr_t cfg1_dma_addr; + ConfigPageHeader_t header; + int id; + int requested, configuration, data,i; u8 flags, factor; - max_id = ioc->sh->max_id - 1; - - /* Following parameters will not change - * in this routine. - */ - iocmd.cmd = SYNCHRONIZE_CACHE; - iocmd.flags = 0; - iocmd.physDiskNum = -1; - iocmd.data = NULL; - iocmd.data_dma = -1; - iocmd.size = 0; - iocmd.rsvd = iocmd.rsvd2 = 0; - - /* No SCSI hosts - */ - if (hd->Targets == NULL) - return 0; - - /* Skip the host - */ - if (id == hostId) - id++; - - /* Write SDP1 for all SPI devices - * Alloc memory and set up config buffer - */ - if (ioc->bus_type == SPI) { - if (ioc->spi_data.sdp1length > 0) { - pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, - ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); - - if (pcfg1Data != NULL) { - doConfig = 1; - header1.PageVersion = ioc->spi_data.sdp1version; - header1.PageLength = ioc->spi_data.sdp1length; - header1.PageNumber = 1; - header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; - cfg.cfghdr.hdr = &header1; - cfg.physAddr = cfg1_dma_addr; - cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; - cfg.dir = 1; - cfg.timeout = 0; - } - } - } + if (ioc->bus_type != SPI) + return; - /* loop through all devices on this port - */ - while (bus < MPT_MAX_BUS) { - iocmd.bus = bus; - iocmd.id = id; - pTarget = hd->Targets[(int)id]; + if (!ioc->spi_data.sdp1length) + return; - if (doConfig) { + pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev, + ioc->spi_data.sdp1length * 4, &cfg1_dma_addr); - /* Set the negotiation flags */ - if (pTarget && (pTarget = hd->Targets[id]) && !pTarget->raidVolume) { - flags = pTarget->negoFlags; - } else { - flags = hd->ioc->spi_data.noQas; - if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { - data = hd->ioc->spi_data.nvram[id]; + if (pcfg1Data == NULL) + return; - if (data & MPT_NVRAM_WIDE_DISABLE) - flags |= MPT_TARGET_NO_NEGO_WIDE; + header.PageVersion = ioc->spi_data.sdp1version; + header.PageLength = ioc->spi_data.sdp1length; + header.PageNumber = 1; + header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; + cfg.cfghdr.hdr = &header; + cfg.physAddr = cfg1_dma_addr; + cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; + cfg.dir = 1; + cfg.timeout = 0; - factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; - if ((factor == 0) || (factor == MPT_ASYNC)) - flags |= MPT_TARGET_NO_NEGO_SYNC; - } + if (vtarget->raidVolume && ioc->raid_data.pIocPg3) { + for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { + id = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID; + flags = hd->ioc->spi_data.noQas; + if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { + data = hd->ioc->spi_data.nvram[id]; + if (data & MPT_NVRAM_WIDE_DISABLE) + flags |= MPT_TARGET_NO_NEGO_WIDE; + factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; + if ((factor == 0) || (factor == MPT_ASYNC)) + flags |= MPT_TARGET_NO_NEGO_SYNC; } - - /* Force to async, narrow */ mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested, - &configuration, flags); + &configuration, flags); dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC " "offset=0 negoFlags=%x request=%x config=%x\n", id, flags, requested, configuration)); pcfg1Data->RequestedParameters = cpu_to_le32(requested); pcfg1Data->Reserved = 0; pcfg1Data->Configuration = cpu_to_le32(configuration); - cfg.pageAddr = (bus<<8) | id; + cfg.pageAddr = (vtarget->bus_id<<8) | id; mpt_config(hd->ioc, &cfg); } + } else { + flags = vtarget->negoFlags; + mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested, + &configuration, flags); + dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC " + "offset=0 negoFlags=%x request=%x config=%x\n", + vtarget->target_id, flags, requested, configuration)); + pcfg1Data->RequestedParameters = cpu_to_le32(requested); + pcfg1Data->Reserved = 0; + pcfg1Data->Configuration = cpu_to_le32(configuration); + cfg.pageAddr = (vtarget->bus_id<<8) | vtarget->target_id; + mpt_config(hd->ioc, &cfg); + } - /* If target Ptr NULL or if this target is NOT a disk, skip. - */ - if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){ - for (lun=0; lun <= MPT_LAST_LUN; lun++) { - /* If LUN present, issue the command - */ - lun_index = (lun >> 5); /* 32 luns per lun_index */ - indexed_lun = (lun % 32); - if (pTarget->luns[lun_index] & (1<pcidev, header.PageLength * 4, pcfg1Data, cfg1_dma_addr); +} - if (id > max_id) { - id = 0; - bus++; - } - } +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/** + * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks. + * @hd: Pointer to a SCSI HOST structure + * @vtarget: per device private data + * @lun: lun + * + * Uses the ISR, but with special processing. + * MUST be single-threaded. + * + */ +static void +mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice) +{ + INTERNAL_CMD iocmd; - if (pcfg1Data) { - pci_free_consistent(ioc->pcidev, header1.PageLength * 4, pcfg1Data, cfg1_dma_addr); - } + /* Following parameters will not change + * in this routine. + */ + iocmd.cmd = SYNCHRONIZE_CACHE; + iocmd.flags = 0; + iocmd.physDiskNum = -1; + iocmd.data = NULL; + iocmd.data_dma = -1; + iocmd.size = 0; + iocmd.rsvd = iocmd.rsvd2 = 0; + iocmd.bus = vdevice->bus_id; + iocmd.id = vdevice->target_id; + iocmd.lun = (u8)vdevice->lun; - return 0; + if ((vdevice->vtarget->type & TYPE_DISK) && + (vdevice->configured_lun)) + mptscsih_do_cmd(hd, &iocmd); } /* Search IOC page 3 to determine if this is hidden physical disk @@ -4144,7 +4130,7 @@ mptscsih_domainValidation(void *arg) static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) { - VirtDevice *pTarget; + VirtTarget *vtarget; int ii; if (hd->Targets == NULL) @@ -4157,11 +4143,11 @@ mptscsih_qas_check(MPT_SCSI_HOST *hd, int id) if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0) continue; - pTarget = hd->Targets[ii]; + vtarget = hd->Targets[ii]; - if ((pTarget != NULL) && (!pTarget->raidVolume)) { - if ((pTarget->negoFlags & hd->ioc->spi_data.noQas) == 0) { - pTarget->negoFlags |= hd->ioc->spi_data.noQas; + if ((vtarget != NULL) && (!vtarget->raidVolume)) { + if ((vtarget->negoFlags & hd->ioc->spi_data.noQas) == 0) { + vtarget->negoFlags |= hd->ioc->spi_data.noQas; dnegoprintk(("writeSDP1: id=%d flags=0\n", id)); mptscsih_writeSDP1(hd, 0, ii, 0); } @@ -4201,7 +4187,7 @@ static int mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) { MPT_ADAPTER *ioc = hd->ioc; - VirtDevice *pTarget; + VirtTarget *vtarget; SCSIDevicePage1_t *pcfg1Data; SCSIDevicePage0_t *pcfg0Data; u8 *pbuf1; @@ -4272,12 +4258,12 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) iocmd.physDiskNum = -1; iocmd.rsvd = iocmd.rsvd2 = 0; - pTarget = hd->Targets[id]; + vtarget = hd->Targets[id]; /* Use tagged commands if possible. */ - if (pTarget) { - if (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES) + if (vtarget) { + if (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) iocmd.flags |= MPT_ICFLAG_TAGGED_CMD; else { if (hd->ioc->facts.FWVersion.Word < 0x01000600) @@ -4493,7 +4479,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) /* Reset the size for disks */ inq0 = (*pbuf1) & 0x1F; - if ((inq0 == 0) && pTarget && !pTarget->raidVolume) { + if ((inq0 == 0) && vtarget && !vtarget->raidVolume) { sz = 0x40; iocmd.size = sz; } @@ -4503,8 +4489,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) */ if (inq0 == TYPE_PROCESSOR) { mptscsih_initTarget(hd, - bus, - id, + vtarget, lun, pbuf1, sz); @@ -4518,22 +4503,22 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) goto target_done; if (sz == 0x40) { - if ((pTarget->maxWidth == 1) && (pTarget->maxOffset) && (nfactor < 0x0A) - && (pTarget->minSyncFactor > 0x09)) { + if ((vtarget->maxWidth == 1) && (vtarget->maxOffset) && (nfactor < 0x0A) + && (vtarget->minSyncFactor > 0x09)) { if ((pbuf1[56] & 0x04) == 0) ; else if ((pbuf1[56] & 0x01) == 1) { - pTarget->minSyncFactor = + vtarget->minSyncFactor = nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320; } else { - pTarget->minSyncFactor = + vtarget->minSyncFactor = nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160; } - dv.max.factor = pTarget->minSyncFactor; + dv.max.factor = vtarget->minSyncFactor; if ((pbuf1[56] & 0x02) == 0) { - pTarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; + vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS; hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS; ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n", @@ -4616,8 +4601,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id)); hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE; mptscsih_initTarget(hd, - bus, - id, + vtarget, lun, pbuf1, sz); @@ -5118,7 +5102,7 @@ target_done: static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) { - VirtDevice *pTarget; + VirtTarget *vtarget; SCSIDevicePage0_t *pPage0; SCSIDevicePage1_t *pPage1; int val = 0, data, configuration; @@ -5138,11 +5122,11 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) * already throttled back. */ negoFlags = hd->ioc->spi_data.noQas; - if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) { - width = pTarget->maxWidth; - offset = pTarget->maxOffset; - factor = pTarget->minSyncFactor; - negoFlags |= pTarget->negoFlags; + if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume) { + width = vtarget->maxWidth; + offset = vtarget->maxOffset; + factor = vtarget->minSyncFactor; + negoFlags |= vtarget->negoFlags; } else { if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { data = hd->ioc->spi_data.nvram[id]; @@ -5344,11 +5328,11 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) * or overwrite nvram (phys disks only). */ - if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume ) { - pTarget->maxWidth = dv->now.width; - pTarget->maxOffset = dv->now.offset; - pTarget->minSyncFactor = dv->now.factor; - pTarget->negoFlags = dv->now.flags; + if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume ) { + vtarget->maxWidth = dv->now.width; + vtarget->maxOffset = dv->now.offset; + vtarget->minSyncFactor = dv->now.factor; + vtarget->negoFlags = dv->now.flags; } else { /* Preserv all flags, use * read-modify-write algorithm @@ -5512,7 +5496,7 @@ mptscsih_fillbuf(char *buffer, int size, int index, int width) * Called only if DV_NOT_DONE flag is set */ static void -mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) +mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc) { MPT_ADAPTER *ioc = hd->ioc; u8 cmd; @@ -5520,16 +5504,16 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) ddvtprintk((MYIOC_s_NOTE_FMT " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", - hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); + hd->ioc->name, sc->device->id, sc->device->lun , hd->negoNvram, sc->cmnd[0])); - if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) + if ((sc->device->lun != 0) || (hd->negoNvram != 0)) return; - cmd = pReq->CDB[0]; + cmd = sc->cmnd[0]; if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { pSpi = &ioc->spi_data; - if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) { + if ((ioc->raid_data.isRaid & (1 << sc->device->id)) && ioc->raid_data.pIocPg3) { /* Set NEED_DV for all hidden disks */ Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; @@ -5542,8 +5526,8 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) numPDisk--; } } - pSpi->dvStatus[pReq->TargetID] |= MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for visible disk id %d\n", pReq->TargetID)); + pSpi->dvStatus[sc->device->id] |= MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for visible disk id %d\n", sc->device->id)); } } @@ -5590,7 +5574,6 @@ mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) } } } - #endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */ EXPORT_SYMBOL(mptscsih_remove); @@ -5602,7 +5585,9 @@ EXPORT_SYMBOL(mptscsih_resume); EXPORT_SYMBOL(mptscsih_proc_info); EXPORT_SYMBOL(mptscsih_info); EXPORT_SYMBOL(mptscsih_qcmd); +EXPORT_SYMBOL(mptscsih_target_alloc); EXPORT_SYMBOL(mptscsih_slave_alloc); +EXPORT_SYMBOL(mptscsih_target_destroy); EXPORT_SYMBOL(mptscsih_slave_destroy); EXPORT_SYMBOL(mptscsih_slave_configure); EXPORT_SYMBOL(mptscsih_abort); diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h index 971fda4b8b5..d3cba12f4bd 100644 --- a/drivers/message/fusion/mptscsih.h +++ b/drivers/message/fusion/mptscsih.h @@ -91,7 +91,9 @@ extern int mptscsih_resume(struct pci_dev *pdev); extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func); extern const char * mptscsih_info(struct Scsi_Host *SChost); extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)); +extern int mptscsih_target_alloc(struct scsi_target *starget); extern int mptscsih_slave_alloc(struct scsi_device *device); +extern void mptscsih_target_destroy(struct scsi_target *starget); extern void mptscsih_slave_destroy(struct scsi_device *device); extern int mptscsih_slave_configure(struct scsi_device *device); extern int mptscsih_abort(struct scsi_cmnd * SCpnt); diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 91bc467477e..ce332a6085e 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -109,8 +109,10 @@ static struct scsi_host_template mptspi_driver_template = { .name = "MPT SPI Host", .info = mptscsih_info, .queuecommand = mptscsih_qcmd, + .target_alloc = mptscsih_target_alloc, .slave_alloc = mptscsih_slave_alloc, .slave_configure = mptscsih_slave_configure, + .target_destroy = mptscsih_target_destroy, .slave_destroy = mptscsih_slave_destroy, .change_queue_depth = mptscsih_change_queue_depth, .eh_abort_handler = mptscsih_abort, @@ -312,10 +314,10 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) } memset(mem, 0, sz); - hd->Targets = (VirtDevice **) mem; + hd->Targets = (VirtTarget **) mem; dprintk((KERN_INFO - " Targets @ %p, sz=%d\n", hd->Targets, sz)); + " vdev @ %p, sz=%d\n", hd->Targets, sz)); /* Clear the TM flags */ -- cgit v1.2.3-70-g09d2 From f61c1c41b6b959d08d87eee876406bdbcac77b7c Mon Sep 17 00:00:00 2001 From: "Moore, Eric Dean" Date: Wed, 16 Nov 2005 18:54:27 -0700 Subject: [SCSI] mptfusion - bump version Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index 2a46b33fa76..6c48d1f54ac 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -76,8 +76,8 @@ #define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.03.04" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.04" +#define MPT_LINUX_VERSION_COMMON "3.03.05" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.05" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ -- cgit v1.2.3-70-g09d2 From 38d76df2f5483478dee803cb6e39da5e506a6643 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 9 Dec 2005 11:34:45 -0500 Subject: [SCSI] sd: Always do write-protect check Since nobody has offered an explanation for why the sd driver makes a write-protect check only for devices with removable media, I'm submitting this patch to get rid of the removable-media test. Signed-off-by: Alan Stern Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8613a131771..d82795455ef 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1509,9 +1509,7 @@ static int sd_revalidate_disk(struct gendisk *disk) */ if (sdkp->media_present) { sd_read_capacity(sdkp, disk->disk_name, buffer); - if (sdp->removable) - sd_read_write_protect_flag(sdkp, disk->disk_name, - buffer); + sd_read_write_protect_flag(sdkp, disk->disk_name, buffer); sd_read_cache_type(sdkp, disk->disk_name, buffer); } -- cgit v1.2.3-70-g09d2 From e7a1ca1d27e20ea2c0ba161c57e3c1d4112b60f7 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 14 Dec 2005 19:27:28 +0100 Subject: [SCSI] handle scsi_add_host failure for aic79xx and fix compiler warning Add scsi_add_host() failure handling for aic79xx Also silence a compiler warning : drivers/scsi/aic7xxx/aic79xx_osm.c: In function `ahd_linux_register_host': drivers/scsi/aic7xxx/aic79xx_osm.c:1099: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result Signed-off-by: Jesper Juhl Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx/aic79xx_osm.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 6aab9dacdee..1c8f872e2dd 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1064,6 +1064,7 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa struct Scsi_Host *host; char *new_name; u_long s; + int retval; template->name = ahd->description; host = scsi_host_alloc(template, sizeof(struct ahd_softc *)); @@ -1096,9 +1097,15 @@ ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *templa host->transportt = ahd_linux_transport_template; - scsi_add_host(host, &ahd->dev_softc->dev); /* XXX handle failure */ + retval = scsi_add_host(host, &ahd->dev_softc->dev); + if (retval) { + printk(KERN_WARNING "aic79xx: scsi_add_host failed\n"); + scsi_host_put(host); + return retval; + } + scsi_scan_host(host); - return (0); + return 0; } uint64_t -- cgit v1.2.3-70-g09d2 From 9e1fe9314cb5649b2dc73690f2cd8d0068e633d9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 14 Dec 2005 19:27:20 +0100 Subject: [SCSI] handle scsi_add_host failure for aic7xxx and fix compiler warning Add scsi_add_host() failure handling for aic7xxx Also silence a compiler warning : drivers/scsi/aic7xxx/aic7xxx_osm.c: In function `ahc_linux_register_host': drivers/scsi/aic7xxx/aic7xxx_osm.c:1100: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result Signed-off-by: Jesper Juhl Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx/aic7xxx_osm.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index d866213f42b..fd389e9f946 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -1061,10 +1061,11 @@ uint32_t aic7xxx_verbose; int ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template) { - char buf[80]; - struct Scsi_Host *host; + char buf[80]; + struct Scsi_Host *host; char *new_name; - u_long s; + u_long s; + int retval; template->name = ahc->description; host = scsi_host_alloc(template, sizeof(struct ahc_softc *)); @@ -1097,9 +1098,16 @@ ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *templa host->transportt = ahc_linux_transport_template; - scsi_add_host(host, (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); /* XXX handle failure */ + retval = scsi_add_host(host, + (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); + if (retval) { + printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n"); + scsi_host_put(host); + return retval; + } + scsi_scan_host(host); - return (0); + return 0; } /* -- cgit v1.2.3-70-g09d2 From 6e68af666f5336254b5715dca591026b7324499a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 11 Nov 2005 05:30:27 -0600 Subject: [SCSI] Convert SCSI mid-layer to scsi_execute_async Add scsi helpers to create really-large-requests and convert scsi-ml to scsi_execute_async(). Per Jens's previous comments, I placed this function in scsi_lib.c. I made it follow all the queue's limits - I think I did at least :), so I removed the warning on the function header. I think the scsi_execute_* functions should eventually take a request_queue and be placed some place where the dm-multipath hw_handler can use them if that failover code is going to stay in the kernel. That conversion patch will be sent in another mail though. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 47 ++------- drivers/scsi/scsi_lib.c | 230 ++++++++++++++++++++++++++++++++++++++------- drivers/scsi/scsi_priv.h | 1 - fs/bio.c | 20 ++++ include/linux/bio.h | 2 + include/scsi/scsi_device.h | 6 ++ 6 files changed, 233 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 18c5d252301..53ea62d3b53 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1314,23 +1314,6 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) } } -/** - * scsi_eh_lock_done - done function for eh door lock request - * @scmd: SCSI command block for the door lock request - * - * Notes: - * We completed the asynchronous door lock request, and it has either - * locked the door or failed. We must free the command structures - * associated with this request. - **/ -static void scsi_eh_lock_done(struct scsi_cmnd *scmd) -{ - struct scsi_request *sreq = scmd->sc_request; - - scsi_release_request(sreq); -} - - /** * scsi_eh_lock_door - Prevent medium removal for the specified device * @sdev: SCSI device to prevent medium removal @@ -1353,29 +1336,17 @@ static void scsi_eh_lock_done(struct scsi_cmnd *scmd) **/ static void scsi_eh_lock_door(struct scsi_device *sdev) { - struct scsi_request *sreq = scsi_allocate_request(sdev, GFP_KERNEL); + unsigned char cmnd[MAX_COMMAND_SIZE]; - if (unlikely(!sreq)) { - printk(KERN_ERR "%s: request allocate failed," - "prevent media removal cmd not sent\n", __FUNCTION__); - return; - } + cmnd[0] = ALLOW_MEDIUM_REMOVAL; + cmnd[1] = 0; + cmnd[2] = 0; + cmnd[3] = 0; + cmnd[4] = SCSI_REMOVAL_PREVENT; + cmnd[5] = 0; - sreq->sr_cmnd[0] = ALLOW_MEDIUM_REMOVAL; - sreq->sr_cmnd[1] = 0; - sreq->sr_cmnd[2] = 0; - sreq->sr_cmnd[3] = 0; - sreq->sr_cmnd[4] = SCSI_REMOVAL_PREVENT; - sreq->sr_cmnd[5] = 0; - sreq->sr_data_direction = DMA_NONE; - sreq->sr_bufflen = 0; - sreq->sr_buffer = NULL; - sreq->sr_allowed = 5; - sreq->sr_done = scsi_eh_lock_done; - sreq->sr_timeout_per_command = 10 * HZ; - sreq->sr_cmd_len = COMMAND_SIZE(sreq->sr_cmnd[0]); - - scsi_insert_special_req(sreq, 1); + scsi_execute_async(sdev, cmnd, DMA_NONE, NULL, 0, 0, 10 * HZ, + 5, NULL, NULL, GFP_KERNEL); } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 1f2782767ca..eb0cfbfbcf8 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -63,39 +63,6 @@ static struct scsi_host_sg_pool scsi_sg_pools[] = { }; #undef SP - -/* - * Function: scsi_insert_special_req() - * - * Purpose: Insert pre-formed request into request queue. - * - * Arguments: sreq - request that is ready to be queued. - * at_head - boolean. True if we should insert at head - * of queue, false if we should insert at tail. - * - * Lock status: Assumed that lock is not held upon entry. - * - * Returns: Nothing - * - * Notes: This function is called from character device and from - * ioctl types of functions where the caller knows exactly - * what SCSI command needs to be issued. The idea is that - * we merely inject the command into the queue (at the head - * for now), and then call the queue request function to actually - * process it. - */ -int scsi_insert_special_req(struct scsi_request *sreq, int at_head) -{ - /* - * Because users of this function are apt to reuse requests with no - * modification, we have to sanitise the request flags here - */ - sreq->sr_request->flags &= ~REQ_DONTPREP; - blk_insert_request(sreq->sr_device->request_queue, sreq->sr_request, - at_head, sreq); - return 0; -} - static void scsi_run_queue(struct request_queue *q); /* @@ -249,8 +216,13 @@ void scsi_do_req(struct scsi_request *sreq, const void *cmnd, /* * head injection *required* here otherwise quiesce won't work + * + * Because users of this function are apt to reuse requests with no + * modification, we have to sanitise the request flags here */ - scsi_insert_special_req(sreq, 1); + sreq->sr_request->flags &= ~REQ_DONTPREP; + blk_insert_request(sreq->sr_device->request_queue, sreq->sr_request, + 1, sreq); } EXPORT_SYMBOL(scsi_do_req); @@ -327,6 +299,196 @@ int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, } EXPORT_SYMBOL(scsi_execute_req); +struct scsi_io_context { + void *data; + void (*done)(void *data, char *sense, int result, int resid); + char sense[SCSI_SENSE_BUFFERSIZE]; +}; + +static void scsi_end_async(struct request *req) +{ + struct scsi_io_context *sioc = req->end_io_data; + + if (sioc->done) + sioc->done(sioc->data, sioc->sense, req->errors, req->data_len); + + kfree(sioc); + __blk_put_request(req->q, req); +} + +static int scsi_merge_bio(struct request *rq, struct bio *bio) +{ + struct request_queue *q = rq->q; + + bio->bi_flags &= ~(1 << BIO_SEG_VALID); + if (rq_data_dir(rq) == WRITE) + bio->bi_rw |= (1 << BIO_RW); + blk_queue_bounce(q, &bio); + + if (!rq->bio) + blk_rq_bio_prep(q, rq, bio); + else if (!q->back_merge_fn(q, rq, bio)) + return -EINVAL; + else { + rq->biotail->bi_next = bio; + rq->biotail = bio; + rq->hard_nr_sectors += bio_sectors(bio); + rq->nr_sectors = rq->hard_nr_sectors; + } + + return 0; +} + +static int scsi_bi_endio(struct bio *bio, unsigned int bytes_done, int error) +{ + if (bio->bi_size) + return 1; + + bio_put(bio); + return 0; +} + +/** + * scsi_req_map_sg - map a scatterlist into a request + * @rq: request to fill + * @sg: scatterlist + * @nsegs: number of elements + * @bufflen: len of buffer + * @gfp: memory allocation flags + * + * scsi_req_map_sg maps a scatterlist into a request so that the + * request can be sent to the block layer. We do not trust the scatterlist + * sent to use, as some ULDs use that struct to only organize the pages. + */ +static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, + int nsegs, unsigned bufflen, gfp_t gfp) +{ + struct request_queue *q = rq->q; + int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT; + unsigned int data_len = 0, len, bytes, off; + struct page *page; + struct bio *bio = NULL; + int i, err, nr_vecs = 0; + + for (i = 0; i < nsegs; i++) { + page = sgl[i].page; + off = sgl[i].offset; + len = sgl[i].length; + data_len += len; + + while (len > 0) { + bytes = min_t(unsigned int, len, PAGE_SIZE - off); + + if (!bio) { + nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages); + nr_pages -= nr_vecs; + + bio = bio_alloc(gfp, nr_vecs); + if (!bio) { + err = -ENOMEM; + goto free_bios; + } + bio->bi_end_io = scsi_bi_endio; + } + + if (bio_add_pc_page(q, bio, page, bytes, off) != + bytes) { + bio_put(bio); + err = -EINVAL; + goto free_bios; + } + + if (bio->bi_vcnt >= nr_vecs) { + err = scsi_merge_bio(rq, bio); + if (err) { + bio_endio(bio, bio->bi_size, 0); + goto free_bios; + } + bio = NULL; + } + + page++; + len -= bytes; + off = 0; + } + } + + rq->buffer = rq->data = NULL; + rq->data_len = data_len; + return 0; + +free_bios: + while ((bio = rq->bio) != NULL) { + rq->bio = bio->bi_next; + /* + * call endio instead of bio_put incase it was bounced + */ + bio_endio(bio, bio->bi_size, 0); + } + + return err; +} + +/** + * scsi_execute_async - insert request + * @sdev: scsi device + * @cmd: scsi command + * @data_direction: data direction + * @buffer: data buffer (this can be a kernel buffer or scatterlist) + * @bufflen: len of buffer + * @use_sg: if buffer is a scatterlist this is the number of elements + * @timeout: request timeout in seconds + * @retries: number of times to retry request + * @flags: or into request flags + **/ +int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, + int data_direction, void *buffer, unsigned bufflen, + int use_sg, int timeout, int retries, void *privdata, + void (*done)(void *, char *, int, int), gfp_t gfp) +{ + struct request *req; + struct scsi_io_context *sioc; + int err = 0; + int write = (data_direction == DMA_TO_DEVICE); + + sioc = kzalloc(sizeof(*sioc), gfp); + if (!sioc) + return DRIVER_ERROR << 24; + + req = blk_get_request(sdev->request_queue, write, gfp); + if (!req) + goto free_sense; + + if (use_sg) + err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); + else if (bufflen) + err = blk_rq_map_kern(req->q, req, buffer, bufflen, gfp); + + if (err) + goto free_req; + + req->cmd_len = COMMAND_SIZE(cmd[0]); + memcpy(req->cmd, cmd, req->cmd_len); + req->sense = sioc->sense; + req->sense_len = 0; + req->timeout = timeout; + req->flags |= REQ_BLOCK_PC | REQ_QUIET; + req->end_io_data = sioc; + + sioc->data = privdata; + sioc->done = done; + + blk_execute_rq_nowait(req->q, NULL, req, 1, scsi_end_async); + return 0; + +free_req: + blk_put_request(req); +free_sense: + kfree(sioc); + return DRIVER_ERROR << 24; +} +EXPORT_SYMBOL_GPL(scsi_execute_async); + /* * Function: scsi_init_cmd_errh() * diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index a8d121c8fbc..f04e7e11f57 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -40,7 +40,6 @@ extern void scsi_exit_hosts(void); extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd); extern int scsi_setup_command_freelist(struct Scsi_Host *shost); extern void scsi_destroy_command_freelist(struct Scsi_Host *shost); -extern int scsi_insert_special_req(struct scsi_request *sreq, int); extern void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq); extern void __scsi_release_request(struct scsi_request *sreq); diff --git a/fs/bio.c b/fs/bio.c index 460554b07ff..4d21ee3873e 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -385,6 +385,25 @@ static int __bio_add_page(request_queue_t *q, struct bio *bio, struct page return len; } +/** + * bio_add_pc_page - attempt to add page to bio + * @bio: destination bio + * @page: page to add + * @len: vec entry length + * @offset: vec entry offset + * + * Attempt to add a page to the bio_vec maplist. This can fail for a + * number of reasons, such as the bio being full or target block + * device limitations. The target block device must allow bio's + * smaller than PAGE_SIZE, so it is always possible to add a single + * page to an empty bio. This should only be used by REQ_PC bios. + */ +int bio_add_pc_page(request_queue_t *q, struct bio *bio, struct page *page, + unsigned int len, unsigned int offset) +{ + return __bio_add_page(q, bio, page, len, offset); +} + /** * bio_add_page - attempt to add page to bio * @bio: destination bio @@ -1228,6 +1247,7 @@ EXPORT_SYMBOL(bio_clone); EXPORT_SYMBOL(bio_phys_segments); EXPORT_SYMBOL(bio_hw_segments); EXPORT_SYMBOL(bio_add_page); +EXPORT_SYMBOL(bio_add_pc_page); EXPORT_SYMBOL(bio_get_nr_vecs); EXPORT_SYMBOL(bio_map_user); EXPORT_SYMBOL(bio_unmap_user); diff --git a/include/linux/bio.h b/include/linux/bio.h index 685fd3720df..b60ffe32cd2 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -292,6 +292,8 @@ extern struct bio *bio_clone(struct bio *, gfp_t); extern void bio_init(struct bio *); extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int); +extern int bio_add_pc_page(struct request_queue *, struct bio *, struct page *, + unsigned int, unsigned int); extern int bio_get_nr_vecs(struct block_device *); extern struct bio *bio_map_user(struct request_queue *, struct block_device *, unsigned long, unsigned int, int); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 063e32fe036..e94ca4d3603 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -274,6 +274,12 @@ extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, struct scsi_sense_hdr *, int timeout, int retries); +extern int scsi_execute_async(struct scsi_device *sdev, + const unsigned char *cmd, int data_direction, + void *buffer, unsigned bufflen, int use_sg, + int timeout, int retries, void *privdata, + void (*done)(void *, char *, int, int), + gfp_t gfp); static inline unsigned int sdev_channel(struct scsi_device *sdev) { -- cgit v1.2.3-70-g09d2 From 17e01f216b611fc46956dcd9063aec4de75991e3 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 11 Nov 2005 05:31:37 -0600 Subject: [SCSI] add retries field to request for REQ_BLOCK_PC use For tape we need to control the retries. This patch adds a retries counter on the request for REQ_BLOCK_PC commands originating from scsi_execute* to use. REQ_BLOCK_PC commands comming from the block layer SG_IO path continue to use the retires set in the ULD init_command. (scsi_execute* does not set the gendisk so we do not execute the init_command in that path). Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 4 +++- include/linux/blkdev.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index eb0cfbfbcf8..365843a1561 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -259,6 +259,7 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, memcpy(req->cmd, cmd, req->cmd_len); req->sense = sense; req->sense_len = 0; + req->retries = retries; req->timeout = timeout; req->flags |= flags | REQ_BLOCK_PC | REQ_SPECIAL | REQ_QUIET; @@ -472,6 +473,7 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, req->sense = sioc->sense; req->sense_len = 0; req->timeout = timeout; + req->retries = retries; req->flags |= REQ_BLOCK_PC | REQ_QUIET; req->end_io_data = sioc; @@ -1393,7 +1395,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) cmd->sc_data_direction = DMA_NONE; cmd->transfersize = req->data_len; - cmd->allowed = 3; + cmd->allowed = req->retries; cmd->timeout_per_command = req->timeout; cmd->done = scsi_generic_done; } diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9a68716dcf7..509e9a03a32 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -184,6 +184,7 @@ struct request { void *sense; unsigned int timeout; + int retries; /* * For Power Management requests -- cgit v1.2.3-70-g09d2 From 0d95716d6a1308c465d8c17ed1a217628936bb0c Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 11 Nov 2005 05:31:40 -0600 Subject: [SCSI] complete the whole command when it is REQ_BLOCK_PC sd does not allow scsi_io_completion to retry commands for SG_IO requests, and it make sense that it should not happen for st SG_IO commands too. If for st we hit the bottom of scsi_io_completion we will probably screw things up pretty bad. This patch returns to the block layer that the whole command completed and relies on the caller to check the request errors field. For initialization commands like in sd, this adds the previous behavior where scsi_io_completion did not process the error. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 8 +++++++- drivers/scsi/st.c | 6 +++++- 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 365843a1561..3e136bfe421 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1247,7 +1247,13 @@ static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk, static void scsi_generic_done(struct scsi_cmnd *cmd) { BUG_ON(!blk_pc_request(cmd->request)); - scsi_io_completion(cmd, cmd->result == 0 ? cmd->bufflen : 0, 0); + /* + * This will complete the whole command with uptodate=1 so + * as far as the block layer is concerned the command completed + * successfully. Since this is a REQ_BLOCK_PC command the + * caller should check the request's errors value + */ + scsi_io_completion(cmd, cmd->bufflen, 0); } static int scsi_prep_fn(struct request_queue *q, struct request *req) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 6d9078705c5..053444b027d 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4185,7 +4185,11 @@ static void scsi_tape_release(struct kref *kref) static void st_intr(struct scsi_cmnd *SCpnt) { - scsi_io_completion(SCpnt, (SCpnt->result ? 0: SCpnt->bufflen), 1); + /* + * The caller should be checking the request's errors + * value. + */ + scsi_io_completion(SCpnt, SCpnt->bufflen, 0); } /* -- cgit v1.2.3-70-g09d2 From aa7b5cd750c766f66a92c9f78ba176bc77512b7e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Fri, 11 Nov 2005 05:31:41 -0600 Subject: [SCSI] add kmemcache for scsi_io_context Add kmemcache of scsi io contexts. In the future when we finalize on where these functions will live we can add a mempool for it and do a bioset for out REQ_BLOCK_PC bios. This is needed becuase the dm-multipath handlers will want to use the scsi_exectute* functions for failover and we cannot have them and the bio device allocating from the same mempool. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3e136bfe421..54a72f19748 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -306,6 +306,8 @@ struct scsi_io_context { char sense[SCSI_SENSE_BUFFERSIZE]; }; +static kmem_cache_t *scsi_io_context_cache; + static void scsi_end_async(struct request *req) { struct scsi_io_context *sioc = req->end_io_data; @@ -313,7 +315,7 @@ static void scsi_end_async(struct request *req) if (sioc->done) sioc->done(sioc->data, sioc->sense, req->errors, req->data_len); - kfree(sioc); + kmem_cache_free(scsi_io_context_cache, sioc); __blk_put_request(req->q, req); } @@ -452,9 +454,10 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, int err = 0; int write = (data_direction == DMA_TO_DEVICE); - sioc = kzalloc(sizeof(*sioc), gfp); + sioc = kmem_cache_alloc(scsi_io_context_cache, gfp); if (!sioc) return DRIVER_ERROR << 24; + memset(sioc, 0, sizeof(*sioc)); req = blk_get_request(sdev->request_queue, write, gfp); if (!req) @@ -1765,6 +1768,14 @@ int __init scsi_init_queue(void) { int i; + scsi_io_context_cache = kmem_cache_create("scsi_io_context", + sizeof(struct scsi_io_context), + 0, 0, NULL, NULL); + if (!scsi_io_context_cache) { + printk(KERN_ERR "SCSI: can't init scsi io context cache\n"); + return -ENOMEM; + } + for (i = 0; i < SG_MEMPOOL_NR; i++) { struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; int size = sgp->size * sizeof(struct scatterlist); @@ -1792,6 +1803,8 @@ void scsi_exit_queue(void) { int i; + kmem_cache_destroy(scsi_io_context_cache); + for (i = 0; i < SG_MEMPOOL_NR; i++) { struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; mempool_destroy(sgp->pool); -- cgit v1.2.3-70-g09d2 From d6b10348f9397943eb968419a2b7f08895e38472 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 8 Nov 2005 04:06:41 -0600 Subject: [SCSI] convert sg to scsi_execute_async Convert sg to always send scatterlists, and kill scsi_request usage. TODO: - move DIO code to common place or make block layers usable for ULDs. - move buffer allocation code to common place for all ULDs to use. And make buffer allocation code obey all queue limits so we can find out about problems before calling scsi_execute_async. Currently, sg.c could allocate a buffer that is too large, and send the request to scsi_execute_async. scsi_execute_async will then check it against all the queue limits and return a failure in this case. It would nicer to know about the queue limit violation right away. - move indirect (copy_to/from_user) paths commone place or make block layers usable for ULDs. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 686 +++++++++++++++++++++--------------------------------- 1 file changed, 259 insertions(+), 427 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index b55c2a8a547..221e96e2620 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -104,8 +104,6 @@ static int sg_allow_dio = SG_ALLOW_DIO_DEF; static int sg_add(struct class_device *, struct class_interface *); static void sg_remove(struct class_device *, struct class_interface *); -static Scsi_Request *dummy_cmdp; /* only used for sizeof */ - static DEFINE_RWLOCK(sg_dev_arr_lock); /* Also used to lock file descriptor list for device */ @@ -119,7 +117,7 @@ typedef struct sg_scatter_hold { /* holding area for scsi scatter gather info */ unsigned short sglist_len; /* size of malloc'd scatter-gather list ++ */ unsigned bufflen; /* Size of (aggregate) data buffer */ unsigned b_malloc_len; /* actual len malloc'ed in buffer */ - void *buffer; /* Data buffer or scatter list (k_use_sg>0) */ + struct scatterlist *buffer;/* scatter list */ char dio_in_use; /* 0->indirect IO (or mmap), 1->dio */ unsigned char cmd_opcode; /* first byte of command */ } Sg_scatter_hold; @@ -128,12 +126,11 @@ struct sg_device; /* forward declarations */ struct sg_fd; typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ - Scsi_Request *my_cmdp; /* != 0 when request with lower levels */ struct sg_request *nextrp; /* NULL -> tail request (slist) */ struct sg_fd *parentfp; /* NULL -> not in use */ Sg_scatter_hold data; /* hold buffer, perhaps scatter list */ sg_io_hdr_t header; /* scsi command+info, see */ - unsigned char sense_b[sizeof (dummy_cmdp->sr_sense_buffer)]; + unsigned char sense_b[SCSI_SENSE_BUFFERSIZE]; char res_used; /* 1 -> using reserve buffer, 0 -> not ... */ char orphan; /* 1 -> drop on sight, 0 -> normal */ char sg_io_owned; /* 1 -> packet belongs to SG_IO */ @@ -174,7 +171,8 @@ typedef struct sg_device { /* holds the state of each scsi generic device */ } Sg_device; static int sg_fasync(int fd, struct file *filp, int mode); -static void sg_cmd_done(Scsi_Cmnd * SCpnt); /* tasklet or soft irq callback */ +/* tasklet or soft irq callback */ +static void sg_cmd_done(void *data, char *sense, int result, int resid); static int sg_start_req(Sg_request * srp); static void sg_finish_rem_req(Sg_request * srp); static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size); @@ -195,8 +193,8 @@ static void sg_remove_scat(Sg_scatter_hold * schp); static void sg_build_reserve(Sg_fd * sfp, int req_size); static void sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size); static void sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp); -static char *sg_page_malloc(int rqSz, int lowDma, int *retSzp); -static void sg_page_free(char *buff, int size); +static struct page *sg_page_malloc(int rqSz, int lowDma, int *retSzp); +static void sg_page_free(struct page *page, int size); static Sg_fd *sg_add_sfp(Sg_device * sdp, int dev); static int sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); static void __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp); @@ -207,7 +205,6 @@ static int sg_res_in_use(Sg_fd * sfp); static int sg_allow_access(unsigned char opcode, char dev_type); static int sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len); static Sg_device *sg_get_dev(int dev); -static inline unsigned char *sg_scatg2virt(const struct scatterlist *sclp); #ifdef CONFIG_SCSI_PROC_FS static int sg_last_dev(void); #endif @@ -226,6 +223,7 @@ sg_open(struct inode *inode, struct file *filp) { int dev = iminor(inode); int flags = filp->f_flags; + struct request_queue *q; Sg_device *sdp; Sg_fd *sfp; int res; @@ -287,7 +285,9 @@ sg_open(struct inode *inode, struct file *filp) } if (!sdp->headfp) { /* no existing opens on this device */ sdp->sgdebug = 0; - sdp->sg_tablesize = sdp->device->host->sg_tablesize; + q = sdp->device->request_queue; + sdp->sg_tablesize = min(q->max_hw_segments, + q->max_phys_segments); } if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; @@ -340,6 +340,7 @@ sg_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_read: %s, count=%d\n", sdp->disk->disk_name, (int) count)); + if (!access_ok(VERIFY_WRITE, buf, count)) return -EFAULT; if (sfp->force_packid && (count >= SZ_SG_HEADER)) { @@ -491,7 +492,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp) if ((hp->mx_sb_len > 0) && hp->sbp) { if ((CHECK_CONDITION & hp->masked_status) || (DRIVER_SENSE & hp->driver_status)) { - int sb_len = sizeof (dummy_cmdp->sr_sense_buffer); + int sb_len = SCSI_SENSE_BUFFERSIZE; sb_len = (hp->mx_sb_len > sb_len) ? sb_len : hp->mx_sb_len; len = 8 + (int) srp->sense_b[7]; /* Additional sense length field */ len = (len > sb_len) ? sb_len : len; @@ -525,7 +526,7 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) Sg_request *srp; struct sg_header old_hdr; sg_io_hdr_t *hp; - unsigned char cmnd[sizeof (dummy_cmdp->sr_cmnd)]; + unsigned char cmnd[MAX_COMMAND_SIZE]; if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; @@ -624,7 +625,7 @@ sg_new_write(Sg_fd * sfp, const char __user *buf, size_t count, int k; Sg_request *srp; sg_io_hdr_t *hp; - unsigned char cmnd[sizeof (dummy_cmdp->sr_cmnd)]; + unsigned char cmnd[MAX_COMMAND_SIZE]; int timeout; unsigned long ul_timeout; @@ -692,11 +693,9 @@ static int sg_common_write(Sg_fd * sfp, Sg_request * srp, unsigned char *cmnd, int timeout, int blocking) { - int k; - Scsi_Request *SRpnt; + int k, data_dir; Sg_device *sdp = sfp->parentdp; sg_io_hdr_t *hp = &srp->header; - request_queue_t *q; srp->data.cmd_opcode = cmnd[0]; /* hold opcode of command */ hp->status = 0; @@ -723,51 +722,36 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp, sg_finish_rem_req(srp); return -ENODEV; } - SRpnt = scsi_allocate_request(sdp->device, GFP_ATOMIC); - if (SRpnt == NULL) { - SCSI_LOG_TIMEOUT(1, printk("sg_write: no mem\n")); - sg_finish_rem_req(srp); - return -ENOMEM; - } - srp->my_cmdp = SRpnt; - q = SRpnt->sr_device->request_queue; - SRpnt->sr_request->rq_disk = sdp->disk; - SRpnt->sr_sense_buffer[0] = 0; - SRpnt->sr_cmd_len = hp->cmd_len; - SRpnt->sr_use_sg = srp->data.k_use_sg; - SRpnt->sr_sglist_len = srp->data.sglist_len; - SRpnt->sr_bufflen = srp->data.bufflen; - SRpnt->sr_underflow = 0; - SRpnt->sr_buffer = srp->data.buffer; switch (hp->dxfer_direction) { case SG_DXFER_TO_FROM_DEV: case SG_DXFER_FROM_DEV: - SRpnt->sr_data_direction = DMA_FROM_DEVICE; + data_dir = DMA_FROM_DEVICE; break; case SG_DXFER_TO_DEV: - SRpnt->sr_data_direction = DMA_TO_DEVICE; + data_dir = DMA_TO_DEVICE; break; case SG_DXFER_UNKNOWN: - SRpnt->sr_data_direction = DMA_BIDIRECTIONAL; + data_dir = DMA_BIDIRECTIONAL; break; default: - SRpnt->sr_data_direction = DMA_NONE; + data_dir = DMA_NONE; break; } - SRpnt->upper_private_data = srp; - srp->data.k_use_sg = 0; - srp->data.sglist_len = 0; - srp->data.bufflen = 0; - srp->data.buffer = NULL; hp->duration = jiffies_to_msecs(jiffies); /* Now send everything of to mid-level. The next time we hear about this packet is when sg_cmd_done() is called (i.e. a callback). */ - scsi_do_req(SRpnt, (void *) cmnd, - (void *) SRpnt->sr_buffer, hp->dxfer_len, - sg_cmd_done, timeout, SG_DEFAULT_RETRIES); - /* dxfer_len overwrites SRpnt->sr_bufflen, hence need for b_malloc_len */ - return 0; + if (scsi_execute_async(sdp->device, cmnd, data_dir, srp->data.buffer, + hp->dxfer_len, srp->data.k_use_sg, timeout, + SG_DEFAULT_RETRIES, srp, sg_cmd_done, + GFP_ATOMIC)) { + SCSI_LOG_TIMEOUT(1, printk("sg_write: scsi_execute_async failed\n")); + /* + * most likely out of mem, but could also be a bad map + */ + return -ENOMEM; + } else + return 0; } static int @@ -1156,45 +1140,22 @@ sg_fasync(int fd, struct file *filp, int mode) return (retval < 0) ? retval : 0; } -static inline unsigned char * -sg_scatg2virt(const struct scatterlist *sclp) -{ - return (sclp && sclp->page) ? - (unsigned char *) page_address(sclp->page) + sclp->offset : NULL; -} - /* When startFinish==1 increments page counts for pages other than the - first of scatter gather elements obtained from __get_free_pages(). + first of scatter gather elements obtained from alloc_pages(). When startFinish==0 decrements ... */ static void sg_rb_correct4mmap(Sg_scatter_hold * rsv_schp, int startFinish) { - void *page_ptr; + struct scatterlist *sg = rsv_schp->buffer; struct page *page; int k, m; SCSI_LOG_TIMEOUT(3, printk("sg_rb_correct4mmap: startFinish=%d, scatg=%d\n", startFinish, rsv_schp->k_use_sg)); /* N.B. correction _not_ applied to base page of each allocation */ - if (rsv_schp->k_use_sg) { /* reserve buffer is a scatter gather list */ - struct scatterlist *sclp = rsv_schp->buffer; - - for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sclp) { - for (m = PAGE_SIZE; m < sclp->length; m += PAGE_SIZE) { - page_ptr = sg_scatg2virt(sclp) + m; - page = virt_to_page(page_ptr); - if (startFinish) - get_page(page); - else { - if (page_count(page) > 0) - __put_page(page); - } - } - } - } else { /* reserve buffer is just a single allocation */ - for (m = PAGE_SIZE; m < rsv_schp->bufflen; m += PAGE_SIZE) { - page_ptr = (unsigned char *) rsv_schp->buffer + m; - page = virt_to_page(page_ptr); + for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) { + for (m = PAGE_SIZE; m < sg->length; m += PAGE_SIZE) { + page = sg->page; if (startFinish) get_page(page); else { @@ -1210,9 +1171,10 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) { Sg_fd *sfp; struct page *page = NOPAGE_SIGBUS; - void *page_ptr = NULL; - unsigned long offset; + unsigned long offset, len, sa; Sg_scatter_hold *rsv_schp; + struct scatterlist *sg; + int k; if ((NULL == vma) || (!(sfp = (Sg_fd *) vma->vm_private_data))) return page; @@ -1222,30 +1184,21 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type) return page; SCSI_LOG_TIMEOUT(3, printk("sg_vma_nopage: offset=%lu, scatg=%d\n", offset, rsv_schp->k_use_sg)); - if (rsv_schp->k_use_sg) { /* reserve buffer is a scatter gather list */ - int k; - unsigned long sa = vma->vm_start; - unsigned long len; - struct scatterlist *sclp = rsv_schp->buffer; - - for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); - ++k, ++sclp) { - len = vma->vm_end - sa; - len = (len < sclp->length) ? len : sclp->length; - if (offset < len) { - page_ptr = sg_scatg2virt(sclp) + offset; - page = virt_to_page(page_ptr); - get_page(page); /* increment page count */ - break; - } - sa += len; - offset -= len; + sg = rsv_schp->buffer; + sa = vma->vm_start; + for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); + ++k, ++sg) { + len = vma->vm_end - sa; + len = (len < sg->length) ? len : sg->length; + if (offset < len) { + page = sg->page; + get_page(page); /* increment page count */ + break; } - } else { /* reserve buffer is just a single allocation */ - page_ptr = (unsigned char *) rsv_schp->buffer + offset; - page = virt_to_page(page_ptr); - get_page(page); /* increment page count */ + sa += len; + offset -= len; } + if (type) *type = VM_FAULT_MINOR; return page; @@ -1259,8 +1212,10 @@ static int sg_mmap(struct file *filp, struct vm_area_struct *vma) { Sg_fd *sfp; - unsigned long req_sz; + unsigned long req_sz, len, sa; Sg_scatter_hold *rsv_schp; + int k; + struct scatterlist *sg; if ((!filp) || (!vma) || (!(sfp = (Sg_fd *) filp->private_data))) return -ENXIO; @@ -1273,24 +1228,15 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) if (req_sz > rsv_schp->bufflen) return -ENOMEM; /* cannot map more than reserved buffer */ - if (rsv_schp->k_use_sg) { /* reserve buffer is a scatter gather list */ - int k; - unsigned long sa = vma->vm_start; - unsigned long len; - struct scatterlist *sclp = rsv_schp->buffer; - - for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); - ++k, ++sclp) { - if (0 != sclp->offset) - return -EFAULT; /* non page aligned memory ?? */ - len = vma->vm_end - sa; - len = (len < sclp->length) ? len : sclp->length; - sa += len; - } - } else { /* reserve buffer is just a single allocation */ - if ((unsigned long) rsv_schp->buffer & (PAGE_SIZE - 1)) - return -EFAULT; /* non page aligned memory ?? */ + sa = vma->vm_start; + sg = rsv_schp->buffer; + for (k = 0; (k < rsv_schp->k_use_sg) && (sa < vma->vm_end); + ++k, ++sg) { + len = vma->vm_end - sa; + len = (len < sg->length) ? len : sg->length; + sa += len; } + if (0 == sfp->mmap_called) { sg_rb_correct4mmap(rsv_schp, 1); /* do only once per fd lifetime */ sfp->mmap_called = 1; @@ -1304,21 +1250,16 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma) /* This function is a "bottom half" handler that is called by the * mid level when a command is completed (or has failed). */ static void -sg_cmd_done(Scsi_Cmnd * SCpnt) +sg_cmd_done(void *data, char *sense, int result, int resid) { - Scsi_Request *SRpnt = NULL; + Sg_request *srp = data; Sg_device *sdp = NULL; Sg_fd *sfp; - Sg_request *srp = NULL; unsigned long iflags; unsigned int ms; - if (SCpnt && (SRpnt = SCpnt->sc_request)) - srp = (Sg_request *) SRpnt->upper_private_data; if (NULL == srp) { printk(KERN_ERR "sg_cmd_done: NULL request\n"); - if (SRpnt) - scsi_release_request(SRpnt); return; } sfp = srp->parentfp; @@ -1326,49 +1267,34 @@ sg_cmd_done(Scsi_Cmnd * SCpnt) sdp = sfp->parentdp; if ((NULL == sdp) || sdp->detached) { printk(KERN_INFO "sg_cmd_done: device detached\n"); - scsi_release_request(SRpnt); return; } - /* First transfer ownership of data buffers to sg_device object. */ - srp->data.k_use_sg = SRpnt->sr_use_sg; - srp->data.sglist_len = SRpnt->sr_sglist_len; - srp->data.bufflen = SRpnt->sr_bufflen; - srp->data.buffer = SRpnt->sr_buffer; - /* now clear out request structure */ - SRpnt->sr_use_sg = 0; - SRpnt->sr_sglist_len = 0; - SRpnt->sr_bufflen = 0; - SRpnt->sr_buffer = NULL; - SRpnt->sr_underflow = 0; - SRpnt->sr_request->rq_disk = NULL; /* "sg" _disowns_ request blk */ - - srp->my_cmdp = NULL; SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n", - sdp->disk->disk_name, srp->header.pack_id, (int) SRpnt->sr_result)); - srp->header.resid = SCpnt->resid; + sdp->disk->disk_name, srp->header.pack_id, result)); + srp->header.resid = resid; ms = jiffies_to_msecs(jiffies); srp->header.duration = (ms > srp->header.duration) ? (ms - srp->header.duration) : 0; - if (0 != SRpnt->sr_result) { + if (0 != result) { struct scsi_sense_hdr sshdr; - memcpy(srp->sense_b, SRpnt->sr_sense_buffer, - sizeof (srp->sense_b)); - srp->header.status = 0xff & SRpnt->sr_result; - srp->header.masked_status = status_byte(SRpnt->sr_result); - srp->header.msg_status = msg_byte(SRpnt->sr_result); - srp->header.host_status = host_byte(SRpnt->sr_result); - srp->header.driver_status = driver_byte(SRpnt->sr_result); + memcpy(srp->sense_b, sense, sizeof (srp->sense_b)); + srp->header.status = 0xff & result; + srp->header.masked_status = status_byte(result); + srp->header.msg_status = msg_byte(result); + srp->header.host_status = host_byte(result); + srp->header.driver_status = driver_byte(result); if ((sdp->sgdebug > 0) && ((CHECK_CONDITION == srp->header.masked_status) || (COMMAND_TERMINATED == srp->header.masked_status))) - scsi_print_req_sense("sg_cmd_done", SRpnt); + __scsi_print_sense("sg_cmd_done", sense, + SCSI_SENSE_BUFFERSIZE); /* Following if statement is a patch supplied by Eric Youngdale */ - if (driver_byte(SRpnt->sr_result) != 0 - && scsi_command_normalize_sense(SCpnt, &sshdr) + if (driver_byte(result) != 0 + && scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, &sshdr) && !scsi_sense_is_deferred(&sshdr) && sshdr.sense_key == UNIT_ATTENTION && sdp->device->removable) { @@ -1379,8 +1305,6 @@ sg_cmd_done(Scsi_Cmnd * SCpnt) } /* Rely on write phase to clean out srp status values, so no "else" */ - scsi_release_request(SRpnt); - SRpnt = NULL; if (sfp->closed) { /* whoops this fd already released, cleanup */ SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, freeing ...\n")); sg_finish_rem_req(srp); @@ -1431,6 +1355,7 @@ static int sg_sysfs_valid = 0; static int sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) { + struct request_queue *q = scsidp->request_queue; Sg_device *sdp; unsigned long iflags; void *old_sg_dev_arr = NULL; @@ -1473,7 +1398,7 @@ static int sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) sdp->disk = disk; sdp->device = scsidp; init_waitqueue_head(&sdp->o_excl_wait); - sdp->sg_tablesize = scsidp->host ? scsidp->host->sg_tablesize : 0; + sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); sg_nr_dev++; sg_dev_arr[k] = sdp; @@ -1753,36 +1678,35 @@ sg_finish_rem_req(Sg_request * srp) static int sg_build_sgat(Sg_scatter_hold * schp, const Sg_fd * sfp, int tablesize) { - int ret_sz; - int elem_sz = sizeof (struct scatterlist); - int sg_bufflen = tablesize * elem_sz; - int mx_sc_elems = tablesize; + int sg_bufflen = tablesize * sizeof(struct scatterlist); + unsigned int gfp_flags = GFP_ATOMIC | __GFP_NOWARN; - schp->buffer = sg_page_malloc(sg_bufflen, sfp->low_dma, &ret_sz); + /* + * TODO: test without low_dma, we should not need it since + * the block layer will bounce the buffer for us + * + * XXX(hch): we shouldn't need GFP_DMA for the actual S/G list. + */ + if (sfp->low_dma) + gfp_flags |= GFP_DMA; + schp->buffer = kzalloc(sg_bufflen, gfp_flags); if (!schp->buffer) return -ENOMEM; - else if (ret_sz != sg_bufflen) { - sg_bufflen = ret_sz; - mx_sc_elems = sg_bufflen / elem_sz; - } schp->sglist_len = sg_bufflen; - memset(schp->buffer, 0, sg_bufflen); - return mx_sc_elems; /* number of scat_gath elements allocated */ + return tablesize; /* number of scat_gath elements allocated */ } #ifdef SG_ALLOW_DIO_CODE /* vvvvvvvv following code borrowed from st driver's direct IO vvvvvvvvv */ - /* hopefully this generic code will moved to a library */ + /* TODO: hopefully we can use the generic block layer code */ /* Pin down user pages and put them into a scatter gather list. Returns <= 0 if - mapping of all pages not successful - - any page is above max_pfn (i.e., either completely successful or fails) */ static int st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, - unsigned long uaddr, size_t count, int rw, - unsigned long max_pfn) + unsigned long uaddr, size_t count, int rw) { unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT; unsigned long start = uaddr >> PAGE_SHIFT; @@ -1828,21 +1752,17 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, * probably wrong function for rw==WRITE */ flush_dcache_page(pages[i]); - if (page_to_pfn(pages[i]) > max_pfn) - goto out_unlock; /* ?? Is locking needed? I don't think so */ /* if (TestSetPageLocked(pages[i])) goto out_unlock; */ } - /* Populate the scatter/gather list */ - sgl[0].page = pages[0]; + sgl[0].page = pages[0]; sgl[0].offset = uaddr & ~PAGE_MASK; if (nr_pages > 1) { sgl[0].length = PAGE_SIZE - sgl[0].offset; count -= sgl[0].length; for (i=1; i < nr_pages ; i++) { - sgl[i].offset = 0; sgl[i].page = pages[i]; sgl[i].length = count < PAGE_SIZE ? count : PAGE_SIZE; count -= PAGE_SIZE; @@ -1855,10 +1775,6 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, kfree(pages); return nr_pages; - out_unlock: - /* for (j=0; j < i; j++) - unlock_page(pages[j]); */ - res = 0; out_unmap: if (res > 0) { for (j=0; j < res; j++) @@ -1904,20 +1820,20 @@ sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len) sg_io_hdr_t *hp = &srp->header; Sg_scatter_hold *schp = &srp->data; int sg_tablesize = sfp->parentdp->sg_tablesize; - struct scatterlist *sgl; int mx_sc_elems, res; struct scsi_device *sdev = sfp->parentdp->device; if (((unsigned long)hp->dxferp & queue_dma_alignment(sdev->request_queue)) != 0) return 1; + mx_sc_elems = sg_build_sgat(schp, sfp, sg_tablesize); if (mx_sc_elems <= 0) { return 1; } - sgl = (struct scatterlist *)schp->buffer; - res = st_map_user_pages(sgl, mx_sc_elems, (unsigned long)hp->dxferp, dxfer_len, - (SG_DXFER_TO_DEV == hp->dxfer_direction) ? 1 : 0, ULONG_MAX); + res = st_map_user_pages(schp->buffer, mx_sc_elems, + (unsigned long)hp->dxferp, dxfer_len, + (SG_DXFER_TO_DEV == hp->dxfer_direction) ? 1 : 0); if (res <= 0) return 1; schp->k_use_sg = res; @@ -1932,9 +1848,11 @@ sg_build_direct(Sg_request * srp, Sg_fd * sfp, int dxfer_len) static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) { - int ret_sz; + struct scatterlist *sg; + int ret_sz = 0, k, rem_sz, num, mx_sc_elems; + int sg_tablesize = sfp->parentdp->sg_tablesize; int blk_size = buff_size; - unsigned char *p = NULL; + struct page *p = NULL; if ((blk_size < 0) || (!sfp)) return -EFAULT; @@ -1944,59 +1862,35 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size) blk_size = (blk_size + SG_SECTOR_MSK) & (~SG_SECTOR_MSK); SCSI_LOG_TIMEOUT(4, printk("sg_build_indirect: buff_size=%d, blk_size=%d\n", buff_size, blk_size)); - if (blk_size <= SG_SCATTER_SZ) { - p = sg_page_malloc(blk_size, sfp->low_dma, &ret_sz); - if (!p) - return -ENOMEM; - if (blk_size == ret_sz) { /* got it on the first attempt */ - schp->k_use_sg = 0; - schp->buffer = p; - schp->bufflen = blk_size; - schp->b_malloc_len = blk_size; - return 0; - } - } else { - p = sg_page_malloc(SG_SCATTER_SZ, sfp->low_dma, &ret_sz); + + /* N.B. ret_sz carried into this block ... */ + mx_sc_elems = sg_build_sgat(schp, sfp, sg_tablesize); + if (mx_sc_elems < 0) + return mx_sc_elems; /* most likely -ENOMEM */ + + for (k = 0, sg = schp->buffer, rem_sz = blk_size; + (rem_sz > 0) && (k < mx_sc_elems); + ++k, rem_sz -= ret_sz, ++sg) { + + num = (rem_sz > SG_SCATTER_SZ) ? SG_SCATTER_SZ : rem_sz; + p = sg_page_malloc(num, sfp->low_dma, &ret_sz); if (!p) return -ENOMEM; - } -/* Want some local declarations, so start new block ... */ - { /* lets try and build a scatter gather list */ - struct scatterlist *sclp; - int k, rem_sz, num; - int mx_sc_elems; - int sg_tablesize = sfp->parentdp->sg_tablesize; - int first = 1; - - /* N.B. ret_sz carried into this block ... */ - mx_sc_elems = sg_build_sgat(schp, sfp, sg_tablesize); - if (mx_sc_elems < 0) - return mx_sc_elems; /* most likely -ENOMEM */ - - for (k = 0, sclp = schp->buffer, rem_sz = blk_size; - (rem_sz > 0) && (k < mx_sc_elems); - ++k, rem_sz -= ret_sz, ++sclp) { - if (first) - first = 0; - else { - num = - (rem_sz > - SG_SCATTER_SZ) ? SG_SCATTER_SZ : rem_sz; - p = sg_page_malloc(num, sfp->low_dma, &ret_sz); - if (!p) - break; - } - sg_set_buf(sclp, p, ret_sz); - - SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n", - k, sg_scatg2virt(sclp), ret_sz)); - } /* end of for loop */ - schp->k_use_sg = k; - SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k_use_sg=%d, rem_sz=%d\n", k, rem_sz)); - schp->bufflen = blk_size; - if (rem_sz > 0) /* must have failed */ - return -ENOMEM; - } + + sg->page = p; + sg->length = ret_sz; + + SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n", + k, p, ret_sz)); + } /* end of for loop */ + + schp->k_use_sg = k; + SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k_use_sg=%d, rem_sz=%d\n", k, rem_sz)); + + schp->bufflen = blk_size; + if (rem_sz > 0) /* must have failed */ + return -ENOMEM; + return 0; } @@ -2005,6 +1899,7 @@ sg_write_xfer(Sg_request * srp) { sg_io_hdr_t *hp = &srp->header; Sg_scatter_hold *schp = &srp->data; + struct scatterlist *sg = schp->buffer; int num_xfer = 0; int j, k, onum, usglen, ksglen, res; int iovec_count = (int) hp->iovec_count; @@ -2033,63 +1928,45 @@ sg_write_xfer(Sg_request * srp) } else onum = 1; - if (0 == schp->k_use_sg) { /* kernel has single buffer */ - for (j = 0, p = schp->buffer; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 1, &usglen, &up); - if (res) - return res; - usglen = (num_xfer > usglen) ? usglen : num_xfer; - if (__copy_from_user(p, up, usglen)) - return -EFAULT; - p += usglen; - num_xfer -= usglen; - if (num_xfer <= 0) - return 0; - } - } else { /* kernel using scatter gather list */ - struct scatterlist *sclp = (struct scatterlist *) schp->buffer; - - ksglen = (int) sclp->length; - p = sg_scatg2virt(sclp); - for (j = 0, k = 0; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 1, &usglen, &up); - if (res) - return res; - - for (; p; ++sclp, ksglen = (int) sclp->length, - p = sg_scatg2virt(sclp)) { - if (usglen <= 0) - break; - if (ksglen > usglen) { - if (usglen >= num_xfer) { - if (__copy_from_user - (p, up, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_from_user(p, up, usglen)) - return -EFAULT; - p += usglen; - ksglen -= usglen; - break; - } else { - if (ksglen >= num_xfer) { - if (__copy_from_user - (p, up, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_from_user(p, up, ksglen)) + ksglen = sg->length; + p = page_address(sg->page); + for (j = 0, k = 0; j < onum; ++j) { + res = sg_u_iovec(hp, iovec_count, j, 1, &usglen, &up); + if (res) + return res; + + for (; p; ++sg, ksglen = sg->length, + p = page_address(sg->page)) { + if (usglen <= 0) + break; + if (ksglen > usglen) { + if (usglen >= num_xfer) { + if (__copy_from_user(p, up, num_xfer)) return -EFAULT; - up += ksglen; - usglen -= ksglen; + return 0; } - ++k; - if (k >= schp->k_use_sg) + if (__copy_from_user(p, up, usglen)) + return -EFAULT; + p += usglen; + ksglen -= usglen; + break; + } else { + if (ksglen >= num_xfer) { + if (__copy_from_user(p, up, num_xfer)) + return -EFAULT; return 0; + } + if (__copy_from_user(p, up, ksglen)) + return -EFAULT; + up += ksglen; + usglen -= ksglen; } + ++k; + if (k >= schp->k_use_sg) + return 0; } } + return 0; } @@ -2127,29 +2004,25 @@ sg_remove_scat(Sg_scatter_hold * schp) { SCSI_LOG_TIMEOUT(4, printk("sg_remove_scat: k_use_sg=%d\n", schp->k_use_sg)); if (schp->buffer && (schp->sglist_len > 0)) { - struct scatterlist *sclp = (struct scatterlist *) schp->buffer; + struct scatterlist *sg = schp->buffer; if (schp->dio_in_use) { #ifdef SG_ALLOW_DIO_CODE - st_unmap_user_pages(sclp, schp->k_use_sg, TRUE); + st_unmap_user_pages(sg, schp->k_use_sg, TRUE); #endif } else { int k; - for (k = 0; (k < schp->k_use_sg) && sg_scatg2virt(sclp); - ++k, ++sclp) { + for (k = 0; (k < schp->k_use_sg) && sg->page; + ++k, ++sg) { SCSI_LOG_TIMEOUT(5, printk( "sg_remove_scat: k=%d, a=0x%p, len=%d\n", - k, sg_scatg2virt(sclp), sclp->length)); - sg_page_free(sg_scatg2virt(sclp), sclp->length); - sclp->page = NULL; - sclp->offset = 0; - sclp->length = 0; + k, sg->page, sg->length)); + sg_page_free(sg->page, sg->length); } } - sg_page_free(schp->buffer, schp->sglist_len); - } else if (schp->buffer) - sg_page_free(schp->buffer, schp->b_malloc_len); + kfree(schp->buffer); + } memset(schp, 0, sizeof (*schp)); } @@ -2158,6 +2031,7 @@ sg_read_xfer(Sg_request * srp) { sg_io_hdr_t *hp = &srp->header; Sg_scatter_hold *schp = &srp->data; + struct scatterlist *sg = schp->buffer; int num_xfer = 0; int j, k, onum, usglen, ksglen, res; int iovec_count = (int) hp->iovec_count; @@ -2186,63 +2060,45 @@ sg_read_xfer(Sg_request * srp) } else onum = 1; - if (0 == schp->k_use_sg) { /* kernel has single buffer */ - for (j = 0, p = schp->buffer; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 0, &usglen, &up); - if (res) - return res; - usglen = (num_xfer > usglen) ? usglen : num_xfer; - if (__copy_to_user(up, p, usglen)) - return -EFAULT; - p += usglen; - num_xfer -= usglen; - if (num_xfer <= 0) - return 0; - } - } else { /* kernel using scatter gather list */ - struct scatterlist *sclp = (struct scatterlist *) schp->buffer; - - ksglen = (int) sclp->length; - p = sg_scatg2virt(sclp); - for (j = 0, k = 0; j < onum; ++j) { - res = sg_u_iovec(hp, iovec_count, j, 0, &usglen, &up); - if (res) - return res; - - for (; p; ++sclp, ksglen = (int) sclp->length, - p = sg_scatg2virt(sclp)) { - if (usglen <= 0) - break; - if (ksglen > usglen) { - if (usglen >= num_xfer) { - if (__copy_to_user - (up, p, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_to_user(up, p, usglen)) - return -EFAULT; - p += usglen; - ksglen -= usglen; - break; - } else { - if (ksglen >= num_xfer) { - if (__copy_to_user - (up, p, num_xfer)) - return -EFAULT; - return 0; - } - if (__copy_to_user(up, p, ksglen)) + p = page_address(sg->page); + ksglen = sg->length; + for (j = 0, k = 0; j < onum; ++j) { + res = sg_u_iovec(hp, iovec_count, j, 0, &usglen, &up); + if (res) + return res; + + for (; p; ++sg, ksglen = sg->length, + p = page_address(sg->page)) { + if (usglen <= 0) + break; + if (ksglen > usglen) { + if (usglen >= num_xfer) { + if (__copy_to_user(up, p, num_xfer)) return -EFAULT; - up += ksglen; - usglen -= ksglen; + return 0; } - ++k; - if (k >= schp->k_use_sg) + if (__copy_to_user(up, p, usglen)) + return -EFAULT; + p += usglen; + ksglen -= usglen; + break; + } else { + if (ksglen >= num_xfer) { + if (__copy_to_user(up, p, num_xfer)) + return -EFAULT; return 0; + } + if (__copy_to_user(up, p, ksglen)) + return -EFAULT; + up += ksglen; + usglen -= ksglen; } + ++k; + if (k >= schp->k_use_sg) + return 0; } } + return 0; } @@ -2250,37 +2106,32 @@ static int sg_read_oxfer(Sg_request * srp, char __user *outp, int num_read_xfer) { Sg_scatter_hold *schp = &srp->data; + struct scatterlist *sg = schp->buffer; + int k, num; SCSI_LOG_TIMEOUT(4, printk("sg_read_oxfer: num_read_xfer=%d\n", num_read_xfer)); if ((!outp) || (num_read_xfer <= 0)) return 0; - if (schp->k_use_sg > 0) { - int k, num; - struct scatterlist *sclp = (struct scatterlist *) schp->buffer; - - for (k = 0; (k < schp->k_use_sg) && sg_scatg2virt(sclp); - ++k, ++sclp) { - num = (int) sclp->length; - if (num > num_read_xfer) { - if (__copy_to_user - (outp, sg_scatg2virt(sclp), num_read_xfer)) - return -EFAULT; + + for (k = 0; (k < schp->k_use_sg) && sg->page; ++k, ++sg) { + num = sg->length; + if (num > num_read_xfer) { + if (__copy_to_user(outp, page_address(sg->page), + num_read_xfer)) + return -EFAULT; + break; + } else { + if (__copy_to_user(outp, page_address(sg->page), + num)) + return -EFAULT; + num_read_xfer -= num; + if (num_read_xfer <= 0) break; - } else { - if (__copy_to_user - (outp, sg_scatg2virt(sclp), num)) - return -EFAULT; - num_read_xfer -= num; - if (num_read_xfer <= 0) - break; - outp += num; - } + outp += num; } - } else { - if (__copy_to_user(outp, schp->buffer, num_read_xfer)) - return -EFAULT; } + return 0; } @@ -2306,44 +2157,31 @@ sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size) { Sg_scatter_hold *req_schp = &srp->data; Sg_scatter_hold *rsv_schp = &sfp->reserve; + struct scatterlist *sg = rsv_schp->buffer; + int k, num, rem; srp->res_used = 1; SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size)); - size = (size + 1) & (~1); /* round to even for aha1542 */ - if (rsv_schp->k_use_sg > 0) { - int k, num; - int rem = size; - struct scatterlist *sclp = - (struct scatterlist *) rsv_schp->buffer; - - for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sclp) { - num = (int) sclp->length; - if (rem <= num) { - if (0 == k) { - req_schp->k_use_sg = 0; - req_schp->buffer = sg_scatg2virt(sclp); - } else { - sfp->save_scat_len = num; - sclp->length = (unsigned) rem; - req_schp->k_use_sg = k + 1; - req_schp->sglist_len = - rsv_schp->sglist_len; - req_schp->buffer = rsv_schp->buffer; - } - req_schp->bufflen = size; - req_schp->b_malloc_len = rsv_schp->b_malloc_len; - break; - } else - rem -= num; - } - if (k >= rsv_schp->k_use_sg) - SCSI_LOG_TIMEOUT(1, printk("sg_link_reserve: BAD size\n")); - } else { - req_schp->k_use_sg = 0; - req_schp->bufflen = size; - req_schp->buffer = rsv_schp->buffer; - req_schp->b_malloc_len = rsv_schp->b_malloc_len; + rem = size = (size + 1) & (~1); /* round to even for aha1542 */ + + for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) { + num = sg->length; + if (rem <= num) { + sfp->save_scat_len = num; + sg->length = rem; + req_schp->k_use_sg = k + 1; + req_schp->sglist_len = rsv_schp->sglist_len; + req_schp->buffer = rsv_schp->buffer; + + req_schp->bufflen = size; + req_schp->b_malloc_len = rsv_schp->b_malloc_len; + break; + } else + rem -= num; } + + if (k >= rsv_schp->k_use_sg) + SCSI_LOG_TIMEOUT(1, printk("sg_link_reserve: BAD size\n")); } static void @@ -2355,11 +2193,10 @@ sg_unlink_reserve(Sg_fd * sfp, Sg_request * srp) SCSI_LOG_TIMEOUT(4, printk("sg_unlink_reserve: req->k_use_sg=%d\n", (int) req_schp->k_use_sg)); if ((rsv_schp->k_use_sg > 0) && (req_schp->k_use_sg > 0)) { - struct scatterlist *sclp = - (struct scatterlist *) rsv_schp->buffer; + struct scatterlist *sg = rsv_schp->buffer; if (sfp->save_scat_len > 0) - (sclp + (req_schp->k_use_sg - 1))->length = + (sg + (req_schp->k_use_sg - 1))->length = (unsigned) sfp->save_scat_len; else SCSI_LOG_TIMEOUT(1, printk ("sg_unlink_reserve: BAD save_scat_len\n")); @@ -2445,7 +2282,6 @@ sg_add_request(Sg_fd * sfp) if (resp) { resp->nextrp = NULL; resp->header.duration = jiffies_to_msecs(jiffies); - resp->my_cmdp = NULL; } write_unlock_irqrestore(&sfp->rq_list_lock, iflags); return resp; @@ -2463,8 +2299,6 @@ sg_remove_request(Sg_fd * sfp, Sg_request * srp) if ((!sfp) || (!srp) || (!sfp->headrp)) return res; write_lock_irqsave(&sfp->rq_list_lock, iflags); - if (srp->my_cmdp) - srp->my_cmdp->upper_private_data = NULL; prev_rp = sfp->headrp; if (srp == prev_rp) { sfp->headrp = prev_rp->nextrp; @@ -2507,10 +2341,10 @@ sg_add_sfp(Sg_device * sdp, int dev) Sg_fd *sfp; unsigned long iflags; - sfp = (Sg_fd *) sg_page_malloc(sizeof (Sg_fd), 0, NULL); + sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN); if (!sfp) return NULL; - memset(sfp, 0, sizeof (Sg_fd)); + init_waitqueue_head(&sfp->read_wait); rwlock_init(&sfp->rq_list_lock); @@ -2567,7 +2401,7 @@ __sg_remove_sfp(Sg_device * sdp, Sg_fd * sfp) } sfp->parentdp = NULL; SCSI_LOG_TIMEOUT(6, printk("__sg_remove_sfp: sfp=0x%p\n", sfp)); - sg_page_free((char *) sfp, sizeof (Sg_fd)); + kfree(sfp); } /* Returns 0 in normal case, 1 when detached and sdp object removed */ @@ -2632,10 +2466,10 @@ sg_res_in_use(Sg_fd * sfp) } /* If retSzp==NULL want exact size or fail */ -static char * +static struct page * sg_page_malloc(int rqSz, int lowDma, int *retSzp) { - char *resp = NULL; + struct page *resp = NULL; gfp_t page_mask; int order, a_size; int resSz = rqSz; @@ -2650,11 +2484,11 @@ sg_page_malloc(int rqSz, int lowDma, int *retSzp) for (order = 0, a_size = PAGE_SIZE; a_size < rqSz; order++, a_size <<= 1) ; - resp = (char *) __get_free_pages(page_mask, order); + resp = alloc_pages(page_mask, order); while ((!resp) && order && retSzp) { --order; a_size >>= 1; /* divide by 2, until PAGE_SIZE */ - resp = (char *) __get_free_pages(page_mask, order); /* try half */ + resp = alloc_pages(page_mask, order); /* try half */ resSz = a_size; } if (resp) { @@ -2667,15 +2501,15 @@ sg_page_malloc(int rqSz, int lowDma, int *retSzp) } static void -sg_page_free(char *buff, int size) +sg_page_free(struct page *page, int size) { int order, a_size; - if (!buff) + if (!page) return; for (order = 0, a_size = PAGE_SIZE; a_size < size; order++, a_size <<= 1) ; - free_pages((unsigned long) buff, order); + __free_pages(page, order); } #ifndef MAINTENANCE_IN_CMD @@ -3067,13 +2901,11 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) cp = " "; } seq_printf(s, cp); - blen = srp->my_cmdp ? - srp->my_cmdp->sr_bufflen : srp->data.bufflen; - usg = srp->my_cmdp ? - srp->my_cmdp->sr_use_sg : srp->data.k_use_sg; + blen = srp->data.bufflen; + usg = srp->data.k_use_sg; seq_printf(s, srp->done ? ((1 == srp->done) ? "rcv:" : "fin:") - : (srp->my_cmdp ? "act:" : "prior:")); + : "act:"); seq_printf(s, " id=%d blen=%d", srp->header.pack_id, blen); if (srp->done) -- cgit v1.2.3-70-g09d2 From 8b05b773b6030de5b1bab1cbb0bf1ff8c34cdbe0 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 8 Nov 2005 04:06:44 -0600 Subject: [SCSI] convert st to use scsi_execute_async convert st to always send scatterlists and kill scsi_request usage. This is the same as last time as it was posted, but with Kai's patches merged and we now pass the bytes value to scsi_execute_async. TODO: - move DIO code to common place or make block layers usable for ULDs. - move buffer allocation code to common place for all ULDs to use. And make buffer allocation code handle all queue limits so we can find out about problems before calling scsi_execute_async. - move indirect (copy_to/from_user) paths commone place or make block layers usable for ULDs. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/st.c | 254 +++++++++++++++++++++++------------------------------- drivers/scsi/st.h | 14 ++- 2 files changed, 123 insertions(+), 145 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 053444b027d..26e13dc7bcd 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -50,7 +50,6 @@ static const char *verstr = "20050830"; #include #include #include -#include #include @@ -188,8 +187,6 @@ static int from_buffer(struct st_buffer *, char __user *, int); static void move_buffer_data(struct st_buffer *, int); static void buf_to_sg(struct st_buffer *, unsigned int); -static int st_map_user_pages(struct scatterlist *, const unsigned int, - unsigned long, size_t, int, unsigned long); static int sgl_map_user_pages(struct scatterlist *, const unsigned int, unsigned long, size_t, int); static int sgl_unmap_user_pages(struct scatterlist *, const unsigned int, int); @@ -313,12 +310,13 @@ static inline char *tape_name(struct scsi_tape *tape) } -static void st_analyze_sense(struct scsi_request *SRpnt, struct st_cmdstatus *s) +static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s) { const u8 *ucp; - const u8 *sense = SRpnt->sr_sense_buffer; + const u8 *sense = SRpnt->sense; - s->have_sense = scsi_request_normalize_sense(SRpnt, &s->sense_hdr); + s->have_sense = scsi_normalize_sense(SRpnt->sense, + SCSI_SENSE_BUFFERSIZE, &s->sense_hdr); s->flags = 0; if (s->have_sense) { @@ -345,9 +343,9 @@ static void st_analyze_sense(struct scsi_request *SRpnt, struct st_cmdstatus *s) /* Convert the result to success code */ -static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) +static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt) { - int result = SRpnt->sr_result; + int result = SRpnt->result; u8 scode; DEB(const char *stp;) char *name = tape_name(STp); @@ -366,13 +364,12 @@ static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) DEB( if (debugging) { - printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x Len: %d\n", + printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x\n", name, result, - SRpnt->sr_cmnd[0], SRpnt->sr_cmnd[1], SRpnt->sr_cmnd[2], - SRpnt->sr_cmnd[3], SRpnt->sr_cmnd[4], SRpnt->sr_cmnd[5], - SRpnt->sr_bufflen); + SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2], + SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]); if (cmdstatp->have_sense) - scsi_print_req_sense("st", SRpnt); + __scsi_print_sense("st", SRpnt->sense, SCSI_SENSE_BUFFERSIZE); } ) /* end DEB */ if (!debugging) { /* Abnormal conditions for tape */ if (!cmdstatp->have_sense) @@ -386,20 +383,21 @@ static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) /* scode != UNIT_ATTENTION && */ scode != BLANK_CHECK && scode != VOLUME_OVERFLOW && - SRpnt->sr_cmnd[0] != MODE_SENSE && - SRpnt->sr_cmnd[0] != TEST_UNIT_READY) { + SRpnt->cmd[0] != MODE_SENSE && + SRpnt->cmd[0] != TEST_UNIT_READY) { printk(KERN_WARNING "%s: Error with sense data: ", name); - scsi_print_req_sense("st", SRpnt); + __scsi_print_sense("st", SRpnt->sense, + SCSI_SENSE_BUFFERSIZE); } } if (cmdstatp->fixed_format && STp->cln_mode >= EXTENDED_SENSE_START) { /* Only fixed format sense */ if (STp->cln_sense_value) - STp->cleaning_req |= ((SRpnt->sr_sense_buffer[STp->cln_mode] & + STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & STp->cln_sense_mask) == STp->cln_sense_value); else - STp->cleaning_req |= ((SRpnt->sr_sense_buffer[STp->cln_mode] & + STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] & STp->cln_sense_mask) != 0); } if (cmdstatp->have_sense && @@ -411,8 +409,8 @@ static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) if (cmdstatp->have_sense && scode == RECOVERED_ERROR #if ST_RECOVERED_WRITE_FATAL - && SRpnt->sr_cmnd[0] != WRITE_6 - && SRpnt->sr_cmnd[0] != WRITE_FILEMARKS + && SRpnt->cmd[0] != WRITE_6 + && SRpnt->cmd[0] != WRITE_FILEMARKS #endif ) { STp->recover_count++; @@ -420,9 +418,9 @@ static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) DEB( if (debugging) { - if (SRpnt->sr_cmnd[0] == READ_6) + if (SRpnt->cmd[0] == READ_6) stp = "read"; - else if (SRpnt->sr_cmnd[0] == WRITE_6) + else if (SRpnt->cmd[0] == WRITE_6) stp = "write"; else stp = "ioctl"; @@ -438,28 +436,37 @@ static int st_chk_result(struct scsi_tape *STp, struct scsi_request * SRpnt) /* Wakeup from interrupt */ -static void st_sleep_done(struct scsi_cmnd * SCpnt) +static void st_sleep_done(void *data, char *sense, int result, int resid) { - struct scsi_tape *STp = container_of(SCpnt->request->rq_disk->private_data, - struct scsi_tape, driver); + struct st_request *SRpnt = data; + struct scsi_tape *STp = SRpnt->stp; - (STp->buffer)->cmdstat.midlevel_result = SCpnt->result; - SCpnt->request->rq_status = RQ_SCSI_DONE; + memcpy(SRpnt->sense, sense, SCSI_SENSE_BUFFERSIZE); + (STp->buffer)->cmdstat.midlevel_result = SRpnt->result = result; DEB( STp->write_pending = 0; ) - if (SCpnt->request->waiting) - complete(SCpnt->request->waiting); + if (SRpnt->waiting) + complete(SRpnt->waiting); +} + +static struct st_request *st_allocate_request(void) +{ + return kzalloc(sizeof(struct st_request), GFP_KERNEL); +} + +static void st_release_request(struct st_request *streq) +{ + kfree(streq); } /* Do the scsi command. Waits until command performed if do_wait is true. Otherwise write_behind_check() is used to check that the command has finished. */ -static struct scsi_request * -st_do_scsi(struct scsi_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd, +static struct st_request * +st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait) { struct completion *waiting; - unsigned char *bp; /* if async, make sure there's no command outstanding */ if (!do_wait && ((STp->buffer)->last_SRpnt)) { @@ -473,7 +480,7 @@ st_do_scsi(struct scsi_request * SRpnt, struct scsi_tape * STp, unsigned char *c } if (SRpnt == NULL) { - SRpnt = scsi_allocate_request(STp->device, GFP_ATOMIC); + SRpnt = st_allocate_request(); if (SRpnt == NULL) { DEBC( printk(KERN_ERR "%s: Can't get SCSI request.\n", tape_name(STp)); ); @@ -483,6 +490,7 @@ st_do_scsi(struct scsi_request * SRpnt, struct scsi_tape * STp, unsigned char *c (STp->buffer)->syscall_result = (-EBUSY); return NULL; } + SRpnt->stp = STp; } /* If async IO, set last_SRpnt. This ptr tells write_behind_check @@ -492,32 +500,26 @@ st_do_scsi(struct scsi_request * SRpnt, struct scsi_tape * STp, unsigned char *c waiting = &STp->wait; init_completion(waiting); - SRpnt->sr_use_sg = STp->buffer->do_dio || (bytes > (STp->buffer)->frp[0].length); - if (SRpnt->sr_use_sg) { - if (!STp->buffer->do_dio) - buf_to_sg(STp->buffer, bytes); - SRpnt->sr_use_sg = (STp->buffer)->sg_segs; - bp = (char *) &((STp->buffer)->sg[0]); - } else - bp = (STp->buffer)->b_data; - SRpnt->sr_data_direction = direction; - SRpnt->sr_cmd_len = 0; - SRpnt->sr_request->waiting = waiting; - SRpnt->sr_request->rq_status = RQ_SCSI_BUSY; - SRpnt->sr_request->rq_disk = STp->disk; - SRpnt->sr_request->end_io = blk_end_sync_rq; - STp->buffer->cmdstat.have_sense = 0; + SRpnt->waiting = waiting; - scsi_do_req(SRpnt, (void *) cmd, bp, bytes, - st_sleep_done, timeout, retries); + if (!STp->buffer->do_dio) + buf_to_sg(STp->buffer, bytes); - if (do_wait) { + memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd)); + STp->buffer->cmdstat.have_sense = 0; + STp->buffer->syscall_result = 0; + + if (scsi_execute_async(STp->device, cmd, direction, + &((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs, + timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) + /* could not allocate the buffer or request was too large */ + (STp->buffer)->syscall_result = (-EBUSY); + else if (do_wait) { wait_for_completion(waiting); - SRpnt->sr_request->waiting = NULL; - if (SRpnt->sr_request->rq_status != RQ_SCSI_DONE) - SRpnt->sr_result |= (DRIVER_ERROR << 24); + SRpnt->waiting = NULL; (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); } + return SRpnt; } @@ -532,7 +534,7 @@ static int write_behind_check(struct scsi_tape * STp) struct st_buffer *STbuffer; struct st_partstat *STps; struct st_cmdstatus *cmdstatp; - struct scsi_request *SRpnt; + struct st_request *SRpnt; STbuffer = STp->buffer; if (!STbuffer->writing) @@ -548,12 +550,10 @@ static int write_behind_check(struct scsi_tape * STp) wait_for_completion(&(STp->wait)); SRpnt = STbuffer->last_SRpnt; STbuffer->last_SRpnt = NULL; - SRpnt->sr_request->waiting = NULL; - if (SRpnt->sr_request->rq_status != RQ_SCSI_DONE) - SRpnt->sr_result |= (DRIVER_ERROR << 24); + SRpnt->waiting = NULL; (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt); - scsi_release_request(SRpnt); + st_release_request(SRpnt); STbuffer->buffer_bytes -= STbuffer->writing; STps = &(STp->ps[STp->partition]); @@ -593,7 +593,7 @@ static int write_behind_check(struct scsi_tape * STp) it messes up the block number). */ static int cross_eof(struct scsi_tape * STp, int forward) { - struct scsi_request *SRpnt; + struct st_request *SRpnt; unsigned char cmd[MAX_COMMAND_SIZE]; cmd[0] = SPACE; @@ -613,7 +613,7 @@ static int cross_eof(struct scsi_tape * STp, int forward) if (!SRpnt) return (STp->buffer)->syscall_result; - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; if ((STp->buffer)->cmdstat.midlevel_result != 0) @@ -630,7 +630,7 @@ static int flush_write_buffer(struct scsi_tape * STp) int offset, transfer, blks; int result; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; struct st_partstat *STps; result = write_behind_check(STp); @@ -688,7 +688,7 @@ static int flush_write_buffer(struct scsi_tape * STp) STp->dirty = 0; (STp->buffer)->buffer_bytes = 0; } - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; } return result; @@ -785,7 +785,7 @@ static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm) } -/* Lock or unlock the drive door. Don't use when scsi_request allocated. */ +/* Lock or unlock the drive door. Don't use when st_request allocated. */ static int do_door_lock(struct scsi_tape * STp, int do_lock) { int retval, cmd; @@ -844,7 +844,7 @@ static int test_ready(struct scsi_tape *STp, int do_wait) int attentions, waits, max_wait, scode; int retval = CHKRES_READY, new_session = 0; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat; max_wait = do_wait ? ST_BLOCK_SECONDS : 0; @@ -903,7 +903,7 @@ static int test_ready(struct scsi_tape *STp, int do_wait) } if (SRpnt != NULL) - scsi_release_request(SRpnt); + st_release_request(SRpnt); return retval; } @@ -918,7 +918,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) int i, retval, new_session = 0, do_wait; unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning; unsigned short st_flags = filp->f_flags; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; struct st_modedef *STm; struct st_partstat *STps; char *name = tape_name(STp); @@ -993,7 +993,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) goto err_out; } - if (!SRpnt->sr_result && !STp->buffer->cmdstat.have_sense) { + if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) { STp->max_block = ((STp->buffer)->b_data[1] << 16) | ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3]; STp->min_block = ((STp->buffer)->b_data[4] << 8) | @@ -1045,7 +1045,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) } STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0; } - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; STp->inited = 1; @@ -1196,7 +1196,7 @@ static int st_flush(struct file *filp) { int result = 0, result2; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; struct scsi_tape *STp = filp->private_data; struct st_modedef *STm = &(STp->modes[STp->current_mode]); struct st_partstat *STps = &(STp->ps[STp->partition]); @@ -1249,7 +1249,7 @@ static int st_flush(struct file *filp) cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) && (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) { /* Write successful at EOM */ - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; if (STps->drv_file >= 0) STps->drv_file++; @@ -1259,7 +1259,7 @@ static int st_flush(struct file *filp) STps->eof = ST_FM; } else { /* Write error */ - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; printk(KERN_ERR "%s: Error on write filemark.\n", name); if (result == 0) @@ -1400,11 +1400,11 @@ static int setup_buffering(struct scsi_tape *STp, const char __user *buf, i = STp->try_dio && try_rdio; else i = STp->try_dio && try_wdio; + if (i && ((unsigned long)buf & queue_dma_alignment( STp->device->request_queue)) == 0) { - i = st_map_user_pages(&(STbp->sg[0]), STbp->use_sg, - (unsigned long)buf, count, (is_read ? READ : WRITE), - STp->max_pfn); + i = sgl_map_user_pages(&(STbp->sg[0]), STbp->use_sg, + (unsigned long)buf, count, (is_read ? READ : WRITE)); if (i > 0) { STbp->do_dio = i; STbp->buffer_bytes = 0; /* can be used as transfer counter */ @@ -1472,7 +1472,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) int async_write; unsigned char cmd[MAX_COMMAND_SIZE]; const char __user *b_point; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; struct scsi_tape *STp = filp->private_data; struct st_modedef *STm; struct st_partstat *STps; @@ -1624,7 +1624,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) retval = STbp->syscall_result; goto out; } - if (async_write) { + if (async_write && !STbp->syscall_result) { STbp->writing = transfer; STp->dirty = !(STbp->writing == STbp->buffer_bytes); @@ -1698,7 +1698,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) } else { count += do_count; STps->drv_block = (-1); /* Too cautious? */ - retval = (-EIO); + retval = STbp->syscall_result; } } @@ -1728,7 +1728,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) out: if (SRpnt != NULL) - scsi_release_request(SRpnt); + st_release_request(SRpnt); release_buffering(STp); up(&STp->lock); @@ -1742,11 +1742,11 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) Does release user buffer mapping if it is set. */ static long read_tape(struct scsi_tape *STp, long count, - struct scsi_request ** aSRpnt) + struct st_request ** aSRpnt) { int transfer, blks, bytes; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; struct st_modedef *STm; struct st_partstat *STps; struct st_buffer *STbp; @@ -1802,10 +1802,10 @@ static long read_tape(struct scsi_tape *STp, long count, retval = 1; DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n", name, - SRpnt->sr_sense_buffer[0], SRpnt->sr_sense_buffer[1], - SRpnt->sr_sense_buffer[2], SRpnt->sr_sense_buffer[3], - SRpnt->sr_sense_buffer[4], SRpnt->sr_sense_buffer[5], - SRpnt->sr_sense_buffer[6], SRpnt->sr_sense_buffer[7])); + SRpnt->sense[0], SRpnt->sense[1], + SRpnt->sense[2], SRpnt->sense[3], + SRpnt->sense[4], SRpnt->sense[5], + SRpnt->sense[6], SRpnt->sense[7])); if (cmdstatp->have_sense) { if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK) @@ -1835,7 +1835,7 @@ static long read_tape(struct scsi_tape *STp, long count, } STbp->buffer_bytes = bytes - transfer; } else { - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = *aSRpnt = NULL; if (transfer == blks) { /* We did not get anything, error */ printk(KERN_NOTICE "%s: Incorrect block size.\n", name); @@ -1929,7 +1929,7 @@ st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) ssize_t retval = 0; ssize_t i, transfer; int special, do_dio = 0; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; struct scsi_tape *STp = filp->private_data; struct st_modedef *STm; struct st_partstat *STps; @@ -2054,7 +2054,7 @@ st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) out: if (SRpnt != NULL) { - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; } if (do_dio) { @@ -2284,7 +2284,7 @@ static int st_set_options(struct scsi_tape *STp, long options) static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs) { unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SENSE; @@ -2298,7 +2298,7 @@ static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs) if (SRpnt == NULL) return (STp->buffer)->syscall_result; - scsi_release_request(SRpnt); + st_release_request(SRpnt); return (STp->buffer)->syscall_result; } @@ -2310,7 +2310,7 @@ static int write_mode_page(struct scsi_tape *STp, int page, int slow) { int pgo; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt = NULL; + struct st_request *SRpnt = NULL; memset(cmd, 0, MAX_COMMAND_SIZE); cmd[0] = MODE_SELECT; @@ -2329,7 +2329,7 @@ static int write_mode_page(struct scsi_tape *STp, int page, int slow) if (SRpnt == NULL) return (STp->buffer)->syscall_result; - scsi_release_request(SRpnt); + st_release_request(SRpnt); return (STp->buffer)->syscall_result; } @@ -2412,7 +2412,7 @@ static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_cod DEB( char *name = tape_name(STp); ) unsigned char cmd[MAX_COMMAND_SIZE]; struct st_partstat *STps; - struct scsi_request *SRpnt; + struct st_request *SRpnt; if (STp->ready != ST_READY && !load_code) { if (STp->ready == ST_NO_TAPE) @@ -2455,7 +2455,7 @@ static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_cod return (STp->buffer)->syscall_result; retval = (STp->buffer)->syscall_result; - scsi_release_request(SRpnt); + st_release_request(SRpnt); if (!retval) { /* SCSI command successful */ @@ -2503,7 +2503,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon int ioctl_result; int chg_eof = 1; unsigned char cmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; struct st_partstat *STps; int fileno, blkno, at_sm, undone; int datalen = 0, direction = DMA_NONE; @@ -2757,7 +2757,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon ioctl_result = (STp->buffer)->syscall_result; if (!ioctl_result) { /* SCSI command successful */ - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; STps->drv_block = blkno; STps->drv_file = fileno; @@ -2872,7 +2872,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon /* Try the other possible state of Page Format if not already tried */ STp->use_pf = !STp->use_pf | PF_TESTED; - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; return st_int_ioctl(STp, cmd_in, arg); } @@ -2882,7 +2882,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK) STps->eof = ST_EOD; - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; } @@ -2898,7 +2898,7 @@ static int get_location(struct scsi_tape *STp, unsigned int *block, int *partiti { int result; unsigned char scmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; DEB( char *name = tape_name(STp); ) if (STp->ready != ST_READY) @@ -2944,7 +2944,7 @@ static int get_location(struct scsi_tape *STp, unsigned int *block, int *partiti DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name, *block, *partition)); } - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; return result; @@ -2961,7 +2961,7 @@ static int set_location(struct scsi_tape *STp, unsigned int block, int partition unsigned int blk; int timeout; unsigned char scmd[MAX_COMMAND_SIZE]; - struct scsi_request *SRpnt; + struct st_request *SRpnt; DEB( char *name = tape_name(STp); ) if (STp->ready != ST_READY) @@ -3047,7 +3047,7 @@ static int set_location(struct scsi_tape *STp, unsigned int block, int partition result = 0; } - scsi_release_request(SRpnt); + st_release_request(SRpnt); SRpnt = NULL; return result; @@ -3577,7 +3577,7 @@ static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long a static struct st_buffer * new_tape_buffer(int from_initialization, int need_dma, int max_sg) { - int i, got = 0, segs = 0; + int i, got = 0; gfp_t priority; struct st_buffer *tb; @@ -3594,10 +3594,8 @@ static struct st_buffer * return NULL; } memset(tb, 0, i); - tb->frp_segs = tb->orig_frp_segs = segs; + tb->frp_segs = tb->orig_frp_segs = 0; tb->use_sg = max_sg; - if (segs > 0) - tb->b_data = page_address(tb->sg[0].page); tb->frp = (struct st_buf_fragment *)(&(tb->sg[0]) + max_sg); tb->in_use = 1; @@ -3628,7 +3626,7 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm priority = GFP_KERNEL | __GFP_NOWARN; if (need_dma) priority |= GFP_DMA; - for (b_size = PAGE_SIZE, order=0; + for (b_size = PAGE_SIZE, order=0; order <= 6 && b_size < new_size - STbuffer->buffer_size; order++, b_size *= 2) ; /* empty */ @@ -3670,6 +3668,7 @@ static void normalize_buffer(struct st_buffer * STbuffer) } STbuffer->frp_segs = STbuffer->orig_frp_segs; STbuffer->frp_sg_current = 0; + STbuffer->sg_segs = 0; } @@ -3882,7 +3881,6 @@ static int st_probe(struct device *dev) struct st_buffer *buffer; int i, j, mode, dev_num, error; char *stp; - u64 bounce_limit; if (SDp->type != TYPE_TAPE) return -ENODEV; @@ -3892,7 +3890,8 @@ static int st_probe(struct device *dev) return -ENODEV; } - i = SDp->host->sg_tablesize; + i = min(SDp->request_queue->max_hw_segments, + SDp->request_queue->max_phys_segments); if (st_max_sg_segs < i) i = st_max_sg_segs; buffer = new_tape_buffer(1, (SDp->host)->unchecked_isa_dma, i); @@ -3994,11 +3993,6 @@ static int st_probe(struct device *dev) tpnt->long_timeout = ST_LONG_TIMEOUT; tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma; - bounce_limit = scsi_calculate_bounce_limit(SDp->host) >> PAGE_SHIFT; - if (bounce_limit > ULONG_MAX) - bounce_limit = ULONG_MAX; - tpnt->max_pfn = bounce_limit; - for (i = 0; i < ST_NBR_MODES; i++) { STm = &(tpnt->modes[i]); STm->defined = 0; @@ -4077,9 +4071,9 @@ static int st_probe(struct device *dev) sdev_printk(KERN_WARNING, SDp, "Attached scsi tape %s", tape_name(tpnt)); - printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B), max page reachable by HBA %lu\n", + printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n", tape_name(tpnt), tpnt->try_dio ? "yes" : "no", - queue_dma_alignment(SDp->request_queue) + 1, tpnt->max_pfn); + queue_dma_alignment(SDp->request_queue) + 1); return 0; @@ -4411,34 +4405,6 @@ static void do_create_class_files(struct scsi_tape *STp, int dev_num, int mode) return; } - -/* Pin down user pages and put them into a scatter gather list. Returns <= 0 if - - mapping of all pages not successful - - any page is above max_pfn - (i.e., either completely successful or fails) -*/ -static int st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, - unsigned long uaddr, size_t count, int rw, - unsigned long max_pfn) -{ - int i, nr_pages; - - nr_pages = sgl_map_user_pages(sgl, max_pages, uaddr, count, rw); - if (nr_pages <= 0) - return nr_pages; - - for (i=0; i < nr_pages; i++) { - if (page_to_pfn(sgl[i].page) > max_pfn) - goto out_unmap; - } - return nr_pages; - - out_unmap: - sgl_unmap_user_pages(sgl, nr_pages, 0); - return 0; -} - - /* The following functions may be useful for a larger audience. */ static int sgl_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, unsigned long uaddr, size_t count, int rw) diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 790acac160b..411209048d7 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -4,6 +4,7 @@ #include #include +#include /* Descriptor for analyzed sense data */ struct st_cmdstatus { @@ -17,6 +18,17 @@ struct st_cmdstatus { u8 deferred; }; +struct scsi_tape; + +/* scsi tape command */ +struct st_request { + unsigned char cmd[MAX_COMMAND_SIZE]; + unsigned char sense[SCSI_SENSE_BUFFERSIZE]; + int result; + struct scsi_tape *stp; + struct completion *waiting; +}; + /* The tape buffer descriptor. */ struct st_buffer { unsigned char in_use; @@ -28,7 +40,7 @@ struct st_buffer { int read_pointer; int writing; int syscall_result; - struct scsi_request *last_SRpnt; + struct st_request *last_SRpnt; struct st_cmdstatus cmdstat; unsigned char *b_data; unsigned short use_sg; /* zero or max number of s/g segments for this adapter */ -- cgit v1.2.3-70-g09d2 From defd94b75409b983f94548ea2f52ff5787ddb848 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 5 Dec 2005 02:37:06 -0600 Subject: [SCSI] seperate max_sectors from max_hw_sectors - export __blk_put_request and blk_execute_rq_nowait needed for async REQ_BLOCK_PC requests - seperate max_hw_sectors and max_sectors for block/scsi_ioctl.c and SG_IO bio.c helpers per Jens's last comments. Since block/scsi_ioctl.c SG_IO was already testing against max_sectors and SCSI-ml was setting max_sectors and max_hw_sectors to the same value this does not change any scsi SG_IO behavior. It only prepares ll_rw_blk.c, scsi_ioctl.c and bio.c for when SCSI-ml begins to set a valid max_hw_sectors for all LLDs. Today if a LLD does not set it SCSI-ml sets it to a safe default and some LLDs set it to a artificial low value to overcome memory and feedback issues. Note: Since we now cap max_sectors to BLK_DEF_MAX_SECTORS, which is 1024, drivers that used to call blk_queue_max_sectors with a large value of max_sectors will now see the fs requests capped to BLK_DEF_MAX_SECTORS. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- block/ll_rw_blk.c | 34 ++++++++++++++++++++++++++-------- block/scsi_ioctl.c | 2 +- drivers/md/dm-table.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- fs/bio.c | 20 +++++++++++--------- include/linux/blkdev.h | 3 ++- 6 files changed, 42 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index c525b5a2b59..d4beb9a89ee 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -239,7 +239,7 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn) q->backing_dev_info.ra_pages = (VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE; q->backing_dev_info.state = 0; q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY; - blk_queue_max_sectors(q, MAX_SECTORS); + blk_queue_max_sectors(q, SAFE_MAX_SECTORS); blk_queue_hardsect_size(q, 512); blk_queue_dma_alignment(q, 511); blk_queue_congestion_threshold(q); @@ -555,7 +555,12 @@ void blk_queue_max_sectors(request_queue_t *q, unsigned short max_sectors) printk("%s: set to minimum %d\n", __FUNCTION__, max_sectors); } - q->max_sectors = q->max_hw_sectors = max_sectors; + if (BLK_DEF_MAX_SECTORS > max_sectors) + q->max_hw_sectors = q->max_sectors = max_sectors; + else { + q->max_sectors = BLK_DEF_MAX_SECTORS; + q->max_hw_sectors = max_sectors; + } } EXPORT_SYMBOL(blk_queue_max_sectors); @@ -657,8 +662,8 @@ EXPORT_SYMBOL(blk_queue_hardsect_size); void blk_queue_stack_limits(request_queue_t *t, request_queue_t *b) { /* zero is "infinity" */ - t->max_sectors = t->max_hw_sectors = - min_not_zero(t->max_sectors,b->max_sectors); + t->max_sectors = min_not_zero(t->max_sectors,b->max_sectors); + t->max_hw_sectors = min_not_zero(t->max_hw_sectors,b->max_hw_sectors); t->max_phys_segments = min(t->max_phys_segments,b->max_phys_segments); t->max_hw_segments = min(t->max_hw_segments,b->max_hw_segments); @@ -1293,9 +1298,15 @@ static inline int ll_new_hw_segment(request_queue_t *q, static int ll_back_merge_fn(request_queue_t *q, struct request *req, struct bio *bio) { + unsigned short max_sectors; int len; - if (req->nr_sectors + bio_sectors(bio) > q->max_sectors) { + if (unlikely(blk_pc_request(req))) + max_sectors = q->max_hw_sectors; + else + max_sectors = q->max_sectors; + + if (req->nr_sectors + bio_sectors(bio) > max_sectors) { req->flags |= REQ_NOMERGE; if (req == q->last_merge) q->last_merge = NULL; @@ -1325,9 +1336,16 @@ static int ll_back_merge_fn(request_queue_t *q, struct request *req, static int ll_front_merge_fn(request_queue_t *q, struct request *req, struct bio *bio) { + unsigned short max_sectors; int len; - if (req->nr_sectors + bio_sectors(bio) > q->max_sectors) { + if (unlikely(blk_pc_request(req))) + max_sectors = q->max_hw_sectors; + else + max_sectors = q->max_sectors; + + + if (req->nr_sectors + bio_sectors(bio) > max_sectors) { req->flags |= REQ_NOMERGE; if (req == q->last_merge) q->last_merge = NULL; @@ -2144,7 +2162,7 @@ int blk_rq_map_user(request_queue_t *q, struct request *rq, void __user *ubuf, struct bio *bio; int reading; - if (len > (q->max_sectors << 9)) + if (len > (q->max_hw_sectors << 9)) return -EINVAL; if (!len || !ubuf) return -EINVAL; @@ -2259,7 +2277,7 @@ int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf, { struct bio *bio; - if (len > (q->max_sectors << 9)) + if (len > (q->max_hw_sectors << 9)) return -EINVAL; if (!len || !kbuf) return -EINVAL; diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 382dea7b224..4e390dfd315 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -233,7 +233,7 @@ static int sg_io(struct file *file, request_queue_t *q, if (verify_command(file, cmd)) return -EPERM; - if (hdr->dxfer_len > (q->max_sectors << 9)) + if (hdr->dxfer_len > (q->max_hw_sectors << 9)) return -EIO; if (hdr->dxfer_len) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a6d3baa46f6..a6f2dc66c3d 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -638,7 +638,7 @@ int dm_split_args(int *argc, char ***argvp, char *input) static void check_for_valid_limits(struct io_restrictions *rs) { if (!rs->max_sectors) - rs->max_sectors = MAX_SECTORS; + rs->max_sectors = SAFE_MAX_SECTORS; if (!rs->max_phys_segments) rs->max_phys_segments = MAX_PHYS_SEGMENTS; if (!rs->max_hw_segments) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 54a72f19748..14ad2a785a3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -462,6 +462,7 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, req = blk_get_request(sdev->request_queue, write, gfp); if (!req) goto free_sense; + req->flags |= REQ_BLOCK_PC | REQ_QUIET; if (use_sg) err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); @@ -477,7 +478,6 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, req->sense_len = 0; req->timeout = timeout; req->retries = retries; - req->flags |= REQ_BLOCK_PC | REQ_QUIET; req->end_io_data = sioc; sioc->data = privdata; diff --git a/fs/bio.c b/fs/bio.c index 4d21ee3873e..38d3e8023a0 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -313,7 +313,8 @@ int bio_get_nr_vecs(struct block_device *bdev) } static int __bio_add_page(request_queue_t *q, struct bio *bio, struct page - *page, unsigned int len, unsigned int offset) + *page, unsigned int len, unsigned int offset, + unsigned short max_sectors) { int retried_segments = 0; struct bio_vec *bvec; @@ -327,7 +328,7 @@ static int __bio_add_page(request_queue_t *q, struct bio *bio, struct page if (bio->bi_vcnt >= bio->bi_max_vecs) return 0; - if (((bio->bi_size + len) >> 9) > q->max_sectors) + if (((bio->bi_size + len) >> 9) > max_sectors) return 0; /* @@ -401,7 +402,7 @@ static int __bio_add_page(request_queue_t *q, struct bio *bio, struct page int bio_add_pc_page(request_queue_t *q, struct bio *bio, struct page *page, unsigned int len, unsigned int offset) { - return __bio_add_page(q, bio, page, len, offset); + return __bio_add_page(q, bio, page, len, offset, q->max_hw_sectors); } /** @@ -420,8 +421,8 @@ int bio_add_pc_page(request_queue_t *q, struct bio *bio, struct page *page, int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) { - return __bio_add_page(bdev_get_queue(bio->bi_bdev), bio, page, - len, offset); + struct request_queue *q = bdev_get_queue(bio->bi_bdev); + return __bio_add_page(q, bio, page, len, offset, q->max_sectors); } struct bio_map_data { @@ -533,7 +534,7 @@ struct bio *bio_copy_user(request_queue_t *q, unsigned long uaddr, break; } - if (__bio_add_page(q, bio, page, bytes, 0) < bytes) { + if (bio_add_pc_page(q, bio, page, bytes, 0) < bytes) { ret = -EINVAL; break; } @@ -647,7 +648,8 @@ static struct bio *__bio_map_user_iov(request_queue_t *q, /* * sorry... */ - if (__bio_add_page(q, bio, pages[j], bytes, offset) < bytes) + if (bio_add_pc_page(q, bio, pages[j], bytes, offset) < + bytes) break; len -= bytes; @@ -820,8 +822,8 @@ static struct bio *__bio_map_kern(request_queue_t *q, void *data, if (bytes > len) bytes = len; - if (__bio_add_page(q, bio, virt_to_page(data), bytes, - offset) < bytes) + if (bio_add_pc_page(q, bio, virt_to_page(data), bytes, + offset) < bytes) break; data += bytes; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 509e9a03a32..a18500d196e 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -702,7 +702,8 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 -#define MAX_SECTORS 255 +#define SAFE_MAX_SECTORS 255 +#define BLK_DEF_MAX_SECTORS 1024 #define MAX_SEGMENT_SIZE 65536 -- cgit v1.2.3-70-g09d2 From 787926b1b2d21d42ca462dc736b77f1a4a30c503 Mon Sep 17 00:00:00 2001 From: Kai Makisara Date: Sun, 13 Nov 2005 10:04:44 +0200 Subject: [SCSI] Fix st oops with new scsi_execute infrastructure Patch from Kai minus last sg_segs clearing which was merged already. > > Was there a oops or lockup or any debug output you can send me? I will try > > some more large request tests with scsi_debug. You also have to compile your > > kernel with SCSI_MAX_PHYS_SEGMENTS == 255 to get larger requests now. > It was an oops in sgl_unmap_user_pages(). The reason is this: /* XXX: just for debug. Remove when PageReserved is removed */ BUG_ON(PageReserved(page)); I was using /dev/zero as input and it triggers this. When I used a file as input, this did not trigger. Should this BUG_ON be removed? In the same log I noticed that there was another ->sg_segs inconsistency. Also, the field ->last_SRpnt was not reset when scsi_execute_async() failed. This caused the error message "Async command already active" later and prevented proper close. While doing the changes, I noticed that the current code (since 2.6.0-test4) does not set the pages dirty when reading with direct i/o. All of these st problems (including the one I sent earlier) are fixed in the patch at the end of this message. These fixes should probably be included already in 2.6.15. After these fixes, the tape seems to operate as expected. Without other changes, the largest block size with sym53c896 SCSI adapter is 384 kB. The maximum number of sg segments is set to 96 and clustering is disabled in the driver. 96 x 4 kB = 384 kB. OK. I enabled clustering and set max_sectors to 10000 in the SCSI HBA driver. Now the block size limit is 5000 kB as expected. Signed-off-by: James Bottomley --- drivers/scsi/st.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 26e13dc7bcd..2096d137f5e 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -511,9 +511,11 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd if (scsi_execute_async(STp->device, cmd, direction, &((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs, - timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) + timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) { /* could not allocate the buffer or request was too large */ (STp->buffer)->syscall_result = (-EBUSY); + (STp->buffer)->last_SRpnt = NULL; + } else if (do_wait) { wait_for_completion(waiting); SRpnt->waiting = NULL; @@ -1449,14 +1451,15 @@ static int setup_buffering(struct scsi_tape *STp, const char __user *buf, /* Can be called more than once after each setup_buffer() */ -static void release_buffering(struct scsi_tape *STp) +static void release_buffering(struct scsi_tape *STp, int is_read) { struct st_buffer *STbp; STbp = STp->buffer; if (STbp->do_dio) { - sgl_unmap_user_pages(&(STbp->sg[0]), STbp->do_dio, 0); + sgl_unmap_user_pages(&(STbp->sg[0]), STbp->do_dio, is_read); STbp->do_dio = 0; + STbp->sg_segs = 0; } } @@ -1729,7 +1732,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) out: if (SRpnt != NULL) st_release_request(SRpnt); - release_buffering(STp); + release_buffering(STp, 0); up(&STp->lock); return retval; @@ -1787,7 +1790,7 @@ static long read_tape(struct scsi_tape *STp, long count, SRpnt = *aSRpnt; SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE, STp->device->timeout, MAX_RETRIES, 1); - release_buffering(STp); + release_buffering(STp, 1); *aSRpnt = SRpnt; if (!SRpnt) return STbp->syscall_result; @@ -2058,7 +2061,7 @@ st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) SRpnt = NULL; } if (do_dio) { - release_buffering(STp); + release_buffering(STp, 1); STbp->buffer_bytes = 0; } up(&STp->lock); -- cgit v1.2.3-70-g09d2 From 7b16318dea8d9840dac567a2ae8c50ecdea36aea Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 15 Dec 2005 20:17:02 -0600 Subject: Fix up SCSI mismerge I forgot to do a git-update-cache on the merged files ... --- drivers/scsi/scsi_lib.c | 33 +++++++++++++++++++++------------ drivers/scsi/sd.c | 2 +- drivers/scsi/sr.c | 2 +- drivers/scsi/st.c | 2 +- include/scsi/scsi_cmnd.h | 2 +- 5 files changed, 25 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 14ad2a785a3..a7f3f0c84db 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1259,6 +1259,26 @@ static void scsi_generic_done(struct scsi_cmnd *cmd) scsi_io_completion(cmd, cmd->bufflen, 0); } +void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) +{ + struct request *req = cmd->request; + + BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); + memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); + cmd->cmd_len = req->cmd_len; + if (!req->data_len) + cmd->sc_data_direction = DMA_NONE; + else if (rq_data_dir(req) == WRITE) + cmd->sc_data_direction = DMA_TO_DEVICE; + else + cmd->sc_data_direction = DMA_FROM_DEVICE; + + cmd->transfersize = req->data_len; + cmd->allowed = req->retries; + cmd->timeout_per_command = req->timeout; +} +EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd); + static int scsi_prep_fn(struct request_queue *q, struct request *req) { struct scsi_device *sdev = q->queuedata; @@ -1394,18 +1414,7 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) goto kill; } } else { - memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); - cmd->cmd_len = req->cmd_len; - if (rq_data_dir(req) == WRITE) - cmd->sc_data_direction = DMA_TO_DEVICE; - else if (req->data_len) - cmd->sc_data_direction = DMA_FROM_DEVICE; - else - cmd->sc_data_direction = DMA_NONE; - - cmd->transfersize = req->data_len; - cmd->allowed = req->retries; - cmd->timeout_per_command = req->timeout; + scsi_setup_blk_pc_cmnd(cmd); cmd->done = scsi_generic_done; } } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 9d893f08501..3d3ad7d1b77 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -245,7 +245,7 @@ static int sd_init_command(struct scsi_cmnd * SCpnt) * SG_IO from block layer already setup, just copy cdb basically */ if (blk_pc_request(rq)) { - scsi_setup_blk_pc_cmnd(SCpnt, SD_PASSTHROUGH_RETRIES); + scsi_setup_blk_pc_cmnd(SCpnt); if (rq->timeout) timeout = rq->timeout; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7e7398d563c..a4d9be7c687 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -320,7 +320,7 @@ static int sr_init_command(struct scsi_cmnd * SCpnt) * these are already setup, just copy cdb basically */ if (SCpnt->request->flags & REQ_BLOCK_PC) { - scsi_setup_blk_pc_cmnd(SCpnt, MAX_RETRIES); + scsi_setup_blk_pc_cmnd(SCpnt); if (SCpnt->timeout_per_command) timeout = SCpnt->timeout_per_command; diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 894ad53be04..c4aade8f534 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -4198,7 +4198,7 @@ static int st_init_command(struct scsi_cmnd *SCpnt) if (!(SCpnt->request->flags & REQ_BLOCK_PC)) return 0; - scsi_setup_blk_pc_cmnd(SCpnt, 0); + scsi_setup_blk_pc_cmnd(SCpnt); SCpnt->done = st_intr; return 1; } diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 20da282d4ab..41cfc29be89 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -151,6 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int); extern void scsi_finish_command(struct scsi_cmnd *cmd); -extern void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd, int retries); +extern void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd); #endif /* _SCSI_SCSI_CMND_H */ -- cgit v1.2.3-70-g09d2 From 410ca5c7c6ed08bda165e8137bff26c3fbee5a1b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Move scsi_print_msg to SPI class scsi_print_msg() is an SPI-specific concept. This patch moves it from constants.c to scsi_transport_spi.c and updates the Kconfig to link in the SPI class for the drivers which use scsi_print_msg(). Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 13 +++++ drivers/scsi/arm/Kconfig | 1 + drivers/scsi/constants.c | 108 ------------------------------------- drivers/scsi/scsi_transport_spi.c | 109 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 123 insertions(+), 108 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 20dd85a7781..4c42065dea8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -336,6 +336,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT + select SCSI_SPI_ATTRS ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI + select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -632,6 +634,7 @@ config SCSI_DMX3191D config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -752,6 +755,7 @@ config SCSI_GDTH config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using PIO. Most boards such as the Trantor T130 fit this @@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using memory mapped I/O. @@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.10 of the SCSI-HOWTO, available from @@ -1423,6 +1429,7 @@ config SCSI_DC390T config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1681,6 +1688,7 @@ config OKTAGON_SCSI config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI && BROKEN + select SCSI_SPI_ATTRS ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1722,6 +1730,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y + select SCSI_SPI_ATTRS help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y + select SCSI_SPI_ATTRS help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1750,6 +1760,7 @@ config MVME147_SCSI config MVME16x_SCSI bool "NCR53C710 SCSI driver for MVME16x" depends on MVME16x && SCSI && BROKEN + select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1758,6 +1769,7 @@ config MVME16x_SCSI config BVME6000_SCSI bool "NCR53C710 SCSI driver for BVME6000" depends on BVME6000 && SCSI && BROKEN + select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI && BROKEN + select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 13f23043c8a..06d7601cdf5 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -4,6 +4,7 @@ config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" depends on ARCH_ACORN && SCSI && BROKEN + select SCSI_SPI_ATTRS help This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index a972c1e89e3..30a335349ce 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1278,114 +1278,6 @@ void scsi_print_req_sense(const char *devclass, struct scsi_request *sreq) } EXPORT_SYMBOL(scsi_print_req_sense); -#ifdef CONFIG_SCSI_CONSTANTS -static const char * const one_byte_msgs[] = { -/* 0x00 */ "Command Complete", NULL, "Save Pointers", -/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", -/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", -/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag", -/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", -/* 0x0f */ "Initiate Recovery", "Release Recovery" -}; -#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) - -static const char * const two_byte_msgs[] = { -/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" -/* 0x23 */ "Ignore Wide Residue" -}; -#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) - -static const char * const extended_msgs[] = { -/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", -/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" -}; -#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) - - -int scsi_print_msg (const unsigned char *msg) -{ - int len = 0, i; - if (msg[0] == EXTENDED_MESSAGE) { - len = 3 + msg[1]; - if (msg[2] < NO_EXTENDED_MSGS) - printk ("%s ", extended_msgs[msg[2]]); - else - printk ("Extended Message, reserved code (0x%02x) ", - (int) msg[2]); - switch (msg[2]) { - case EXTENDED_MODIFY_DATA_POINTER: - printk("pointer = %d", (int) (msg[3] << 24) | - (msg[4] << 16) | (msg[5] << 8) | msg[6]); - break; - case EXTENDED_SDTR: - printk("period = %d ns, offset = %d", - (int) msg[3] * 4, (int) msg[4]); - break; - case EXTENDED_WDTR: - printk("width = 2^%d bytes", msg[3]); - break; - default: - for (i = 2; i < len; ++i) - printk("%02x ", msg[i]); - } - /* Identify */ - } else if (msg[0] & 0x80) { - printk("Identify disconnect %sallowed %s %d ", - (msg[0] & 0x40) ? "" : "not ", - (msg[0] & 0x20) ? "target routine" : "lun", - msg[0] & 0x7); - len = 1; - /* Normal One byte */ - } else if (msg[0] < 0x1f) { - if (msg[0] < NO_ONE_BYTE_MSGS) - printk(one_byte_msgs[msg[0]]); - else - printk("reserved (%02x) ", msg[0]); - len = 1; - /* Two byte */ - } else if (msg[0] <= 0x2f) { - if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) - printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], - msg[1]); - else - printk("reserved two byte (%02x %02x) ", - msg[0], msg[1]); - len = 2; - } else - printk("reserved"); - return len; -} -EXPORT_SYMBOL(scsi_print_msg); - -#else /* ifndef CONFIG_SCSI_CONSTANTS */ - -int scsi_print_msg (const unsigned char *msg) -{ - int len = 0, i; - - if (msg[0] == EXTENDED_MESSAGE) { - len = 3 + msg[1]; - for (i = 0; i < len; ++i) - printk("%02x ", msg[i]); - /* Identify */ - } else if (msg[0] & 0x80) { - printk("%02x ", msg[0]); - len = 1; - /* Normal One byte */ - } else if (msg[0] < 0x1f) { - printk("%02x ", msg[0]); - len = 1; - /* Two byte */ - } else if (msg[0] <= 0x2f) { - printk("%02x %02x", msg[0], msg[1]); - len = 2; - } else - printk("%02x ", msg[0]); - return len; -} -EXPORT_SYMBOL(scsi_print_msg); -#endif /* ! CONFIG_SCSI_CONSTANTS */ - void scsi_print_command(struct scsi_cmnd *cmd) { /* Assume appended output (i.e. not at start of line) */ diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 4002a98ab16..00a73fc23fc 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -18,6 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -1047,6 +1048,114 @@ void spi_display_xfer_agreement(struct scsi_target *starget) } EXPORT_SYMBOL(spi_display_xfer_agreement); +#ifdef CONFIG_SCSI_CONSTANTS +static const char * const one_byte_msgs[] = { +/* 0x00 */ "Command Complete", NULL, "Save Pointers", +/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", +/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", +/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag", +/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", +/* 0x0f */ "Initiate Recovery", "Release Recovery" +}; +#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) + +static const char * const two_byte_msgs[] = { +/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" +/* 0x23 */ "Ignore Wide Residue" +}; +#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) + +static const char * const extended_msgs[] = { +/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", +/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" +}; +#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) + + +int scsi_print_msg (const unsigned char *msg) +{ + int len = 0, i; + if (msg[0] == EXTENDED_MESSAGE) { + len = 3 + msg[1]; + if (msg[2] < NO_EXTENDED_MSGS) + printk ("%s ", extended_msgs[msg[2]]); + else + printk ("Extended Message, reserved code (0x%02x) ", + (int) msg[2]); + switch (msg[2]) { + case EXTENDED_MODIFY_DATA_POINTER: + printk("pointer = %d", (int) (msg[3] << 24) | + (msg[4] << 16) | (msg[5] << 8) | msg[6]); + break; + case EXTENDED_SDTR: + printk("period = %d ns, offset = %d", + (int) msg[3] * 4, (int) msg[4]); + break; + case EXTENDED_WDTR: + printk("width = 2^%d bytes", msg[3]); + break; + default: + for (i = 2; i < len; ++i) + printk("%02x ", msg[i]); + } + /* Identify */ + } else if (msg[0] & 0x80) { + printk("Identify disconnect %sallowed %s %d ", + (msg[0] & 0x40) ? "" : "not ", + (msg[0] & 0x20) ? "target routine" : "lun", + msg[0] & 0x7); + len = 1; + /* Normal One byte */ + } else if (msg[0] < 0x1f) { + if (msg[0] < NO_ONE_BYTE_MSGS) + printk(one_byte_msgs[msg[0]]); + else + printk("reserved (%02x) ", msg[0]); + len = 1; + /* Two byte */ + } else if (msg[0] <= 0x2f) { + if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) + printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], + msg[1]); + else + printk("reserved two byte (%02x %02x) ", + msg[0], msg[1]); + len = 2; + } else + printk("reserved"); + return len; +} +EXPORT_SYMBOL(scsi_print_msg); + +#else /* ifndef CONFIG_SCSI_CONSTANTS */ + +int scsi_print_msg (const unsigned char *msg) +{ + int len = 0, i; + + if (msg[0] == EXTENDED_MESSAGE) { + len = 3 + msg[1]; + for (i = 0; i < len; ++i) + printk("%02x ", msg[i]); + /* Identify */ + } else if (msg[0] & 0x80) { + printk("%02x ", msg[0]); + len = 1; + /* Normal One byte */ + } else if (msg[0] < 0x1f) { + printk("%02x ", msg[0]); + len = 1; + /* Two byte */ + } else if (msg[0] <= 0x2f) { + printk("%02x %02x", msg[0], msg[1]); + len = 2; + } else + printk("%02x ", msg[0]); + return len; +} +EXPORT_SYMBOL(scsi_print_msg); +#endif /* ! CONFIG_SCSI_CONSTANTS */ + #define SETUP_ATTRIBUTE(field) \ i->private_attrs[count] = class_device_attr_##field; \ if (!i->f->set_##field) { \ -- cgit v1.2.3-70-g09d2 From 1abfd370134553f3b47e3e40a0526e05001409c2 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Rename scsi_print_msg to spi_print_msg Rename scsi_print_msg to spi_print_msg and move its prototype from scsi_dbg.h to scsi_transport_spi.h Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/53c700.c | 6 +++--- drivers/scsi/53c7xx.c | 7 ++++--- drivers/scsi/NCR5380.c | 7 ++++--- drivers/scsi/aha152x.c | 7 ++++--- drivers/scsi/arm/acornscsi.c | 7 ++++--- drivers/scsi/atari_NCR5380.c | 7 ++++--- drivers/scsi/scsi_transport_spi.c | 8 ++++---- drivers/scsi/sun3_NCR5380.c | 7 ++++--- drivers/scsi/sym53c8xx_2/sym_hipd.c | 4 ++-- include/scsi/scsi_dbg.h | 1 - include/scsi/scsi_transport_spi.h | 1 + 11 files changed, 34 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index e7ad269041a..4ce7438608e 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -857,7 +857,7 @@ process_extended_message(struct Scsi_Host *host, printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ", host->host_no, pun, lun, NCR_700_phase[(dsps & 0xf00) >> 8]); - scsi_print_msg(hostdata->msgin); + spi_print_msg(hostdata->msgin); printk("\n"); /* just reject it */ hostdata->msgout[0] = A_REJECT_MSG; @@ -887,7 +887,7 @@ process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata #ifdef NCR_700_DEBUG printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun, NCR_700_phase[(dsps & 0xf00) >> 8]); - scsi_print_msg(hostdata->msgin); + spi_print_msg(hostdata->msgin); printk("\n"); #endif @@ -939,7 +939,7 @@ process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata host->host_no, pun, lun, NCR_700_phase[(dsps & 0xf00) >> 8]); - scsi_print_msg(hostdata->msgin); + spi_print_msg(hostdata->msgin); printk("\n"); /* just reject it */ hostdata->msgout[0] = A_REJECT_MSG; diff --git a/drivers/scsi/53c7xx.c b/drivers/scsi/53c7xx.c index 9cb5dd48383..7894b8ea84b 100644 --- a/drivers/scsi/53c7xx.c +++ b/drivers/scsi/53c7xx.c @@ -282,6 +282,7 @@ #include "scsi.h" #include #include +#include #include "53c7xx.h" #include #include @@ -1724,7 +1725,7 @@ NCR53c7xx_run_tests (struct Scsi_Host *host) { printk ("scsi%d : status ", host->host_no); scsi_print_status (status); printk ("\nscsi%d : message ", host->host_no); - scsi_print_msg (&msg); + spi_print_msg(&msg); printk ("\n"); } else if (hostdata->test_completed == 3) { printk("scsi%d : test 2 no connection with target %d\n", @@ -2313,7 +2314,7 @@ NCR53c7x0_dstat_sir_intr (struct Scsi_Host *host, struct printk ("scsi%d : received message", host->host_no); if (c) printk (" from target %d lun %d ", c->device->id, c->device->lun); - scsi_print_msg ((unsigned char *) hostdata->msg_buf); + spi_print_msg((unsigned char *) hostdata->msg_buf); printk("\n"); } @@ -5540,7 +5541,7 @@ print_dsa (struct Scsi_Host *host, u32 *dsa, const char *prefix) { i > 0 && !check_address ((unsigned long) ptr, 1); ptr += len, i -= len) { printk(" "); - len = scsi_print_msg (ptr); + len = spi_print_msg(ptr); printk("\n"); if (!len) break; diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index cba9655d0f1..9f0ddbe6dc7 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -87,6 +87,7 @@ * the high level code. */ #include +#include #ifndef NDEBUG #define NDEBUG 0 @@ -2377,7 +2378,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since scsi_print_msg() wants the whole thing. + * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2424,7 +2425,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { default: if (!tmp) { printk("scsi%d: rejecting message ", instance->host_no); - scsi_print_msg(extended_msg); + spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) scmd_printk(KERN_INFO, cmd, @@ -2560,7 +2561,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance) { if (!(msg[0] & 0x80)) { printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no); - scsi_print_msg(msg); + spi_print_msg(msg); abort = 1; } else { /* Accept message by clearing ACK */ diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 9df23b654ce..cb2ee25f213 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -259,6 +259,7 @@ #include "scsi.h" #include #include +#include #include "aha152x.h" @@ -1845,7 +1846,7 @@ static void msgi_run(struct Scsi_Host *shpnt) #if defined(AHA152X_DEBUG) if (HOSTDATA(shpnt)->debug & debug_msgi) { printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0)); - scsi_print_msg(&MSGI(0)); + spi_print_msg(&MSGI(0)); printk("\n"); } #endif @@ -1933,7 +1934,7 @@ static void msgi_run(struct Scsi_Host *shpnt) break; printk(INFO_LEAD, CMDINFO(CURRENT_SC)); - scsi_print_msg(&MSGI(0)); + spi_print_msg(&MSGI(0)); printk("\n"); ticks = (MSGI(3) * 4 + 49) / 50; @@ -2031,7 +2032,7 @@ static void msgo_init(struct Scsi_Host *shpnt) int i; printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC)); - for (i=0; i #include +#include #include "acornscsi.h" #include "msgqueue.h" #include "scsi.h" @@ -1370,7 +1371,7 @@ void acornscsi_sendmessage(AS_Host *host) host->scsi.last_message = msg->msg[0]; #if (DEBUG & DEBUG_MESSAGES) - scsi_print_msg(msg->msg); + spi_print_msg(msg->msg); #endif break; @@ -1392,7 +1393,7 @@ void acornscsi_sendmessage(AS_Host *host) while ((msg = msgqueue_getmsg(&host->scsi.msgs, msgnr++)) != NULL) { unsigned int i; #if (DEBUG & DEBUG_MESSAGES) - scsi_print_msg(msg); + spi_print_msg(msg); #endif i = 0; if (acornscsi_write_pio(host, msg->msg, &i, msg->length, 1000000)) @@ -1488,7 +1489,7 @@ void acornscsi_message(AS_Host *host) #if (DEBUG & DEBUG_MESSAGES) printk("scsi%d.%c: message in: ", host->host->host_no, acornscsi_target(host)); - scsi_print_msg(message); + spi_print_msg(message); printk("\n"); #endif diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index 2ae31ceb32a..57295bcea3e 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -74,6 +74,7 @@ * the high level code. */ #include +#include #if (NDEBUG & NDEBUG_LISTS) #define LIST(x,y) \ @@ -2355,7 +2356,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since scsi_print_msg() wants the whole thing. + * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2408,7 +2409,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) default: if (!tmp) { printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO); - scsi_print_msg (extended_msg); + spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk(KERN_DEBUG "scsi%d: rejecting unknown " @@ -2541,7 +2542,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!(msg[0] & 0x80)) { printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); - scsi_print_msg(msg); + spi_print_msg(msg); do_abort(instance); return; } diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 00a73fc23fc..59fb69ba790 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -1072,7 +1072,7 @@ static const char * const extended_msgs[] = { #define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) -int scsi_print_msg (const unsigned char *msg) +int spi_print_msg(const unsigned char *msg) { int len = 0, i; if (msg[0] == EXTENDED_MESSAGE) { @@ -1125,11 +1125,11 @@ int scsi_print_msg (const unsigned char *msg) printk("reserved"); return len; } -EXPORT_SYMBOL(scsi_print_msg); +EXPORT_SYMBOL(spi_print_msg); #else /* ifndef CONFIG_SCSI_CONSTANTS */ -int scsi_print_msg (const unsigned char *msg) +int spi_print_msg(const unsigned char *msg) { int len = 0, i; @@ -1153,7 +1153,7 @@ int scsi_print_msg (const unsigned char *msg) printk("%02x ", msg[0]); return len; } -EXPORT_SYMBOL(scsi_print_msg); +EXPORT_SYMBOL(spi_print_msg); #endif /* ! CONFIG_SCSI_CONSTANTS */ #define SETUP_ATTRIBUTE(field) \ diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index c041bfd56e1..25cced91c8a 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -70,6 +70,7 @@ * */ #include +#include /* * Further development / testing that should be done : @@ -2378,7 +2379,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) * 3..length+1 arguments * * Start the extended message buffer with the EXTENDED_MESSAGE - * byte, since scsi_print_msg() wants the whole thing. + * byte, since spi_print_msg() wants the whole thing. */ extended_msg[0] = EXTENDED_MESSAGE; /* Accept first byte by clearing ACK */ @@ -2431,7 +2432,7 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) default: if (!tmp) { printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO); - scsi_print_msg (extended_msg); + spi_print_msg(extended_msg); printk("\n"); } else if (tmp != EXTENDED_MESSAGE) printk(KERN_DEBUG "scsi%d: rejecting unknown " @@ -2566,7 +2567,7 @@ static void NCR5380_reselect (struct Scsi_Host *instance) if (!(msg[0] & 0x80)) { printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO); - scsi_print_msg(msg); + spi_print_msg(msg); do_abort(instance); return; } diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 1010e716162..8260f040d39 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -75,7 +75,7 @@ static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg) { sym_print_addr(cp->cmd, "%s: ", label); - scsi_print_msg(msg); + spi_print_msg(msg); printf("\n"); } @@ -84,7 +84,7 @@ static void sym_print_nego_msg(struct sym_hcb *np, int target, char *label, u_ch struct sym_tcb *tp = &np->target[target]; dev_info(&tp->starget->dev, "%s: ", label); - scsi_print_msg(msg); + spi_print_msg(msg); printf("\n"); } diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h index b090a11d7e1..4d69dee66d4 100644 --- a/include/scsi/scsi_dbg.h +++ b/include/scsi/scsi_dbg.h @@ -16,7 +16,6 @@ extern void __scsi_print_sense(const char *name, extern void scsi_print_driverbyte(int); extern void scsi_print_hostbyte(int); extern void scsi_print_status(unsigned char); -extern int scsi_print_msg(const unsigned char *); extern const char *scsi_sense_key_string(unsigned char); extern const char *scsi_extd_sense_format(unsigned char, unsigned char); diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h index 5c9b2e56e5b..54a89611e9c 100644 --- a/include/scsi/scsi_transport_spi.h +++ b/include/scsi/scsi_transport_spi.h @@ -146,5 +146,6 @@ void spi_release_transport(struct scsi_transport_template *); void spi_schedule_dv_device(struct scsi_device *); void spi_dv_device(struct scsi_device *); void spi_display_xfer_agreement(struct scsi_target *); +int spi_print_msg(const unsigned char *); #endif /* SCSI_TRANSPORT_SPI_H */ -- cgit v1.2.3-70-g09d2 From 479721538957d514df6dcb29f66e5edd26393bb1 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Fix printing of two-byte messages A missing comma meant that "Ordered Queue Tag" and "Ignore Wide Residue" were being concatenated together. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 59fb69ba790..8cc5dffc04b 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -1060,7 +1060,7 @@ static const char * const one_byte_msgs[] = { #define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) static const char * const two_byte_msgs[] = { -/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" +/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag", /* 0x23 */ "Ignore Wide Residue" }; #define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) -- cgit v1.2.3-70-g09d2 From b32aaffcdc694650d299a59501c5b3e267fca343 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Use ARRAY_SIZE in spi_print_msg Replace the custom NO_*_MSGS definitions with uses of ARRAY_SIZE. This fixes a bug in the definition of NO_EXTENDED_MSGS. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 8cc5dffc04b..380e1671eb1 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -1057,19 +1057,16 @@ static const char * const one_byte_msgs[] = { /* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", /* 0x0f */ "Initiate Recovery", "Release Recovery" }; -#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) static const char * const two_byte_msgs[] = { /* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag", /* 0x23 */ "Ignore Wide Residue" }; -#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) static const char * const extended_msgs[] = { /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", /* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" }; -#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) int spi_print_msg(const unsigned char *msg) @@ -1077,7 +1074,7 @@ int spi_print_msg(const unsigned char *msg) int len = 0, i; if (msg[0] == EXTENDED_MESSAGE) { len = 3 + msg[1]; - if (msg[2] < NO_EXTENDED_MSGS) + if (msg[2] < ARRAY_SIZE(extended_msgs)) printk ("%s ", extended_msgs[msg[2]]); else printk ("Extended Message, reserved code (0x%02x) ", @@ -1107,14 +1104,14 @@ int spi_print_msg(const unsigned char *msg) len = 1; /* Normal One byte */ } else if (msg[0] < 0x1f) { - if (msg[0] < NO_ONE_BYTE_MSGS) + if (msg[0] < ARRAY_SIZE(one_byte_msgs)) printk(one_byte_msgs[msg[0]]); else printk("reserved (%02x) ", msg[0]); len = 1; /* Two byte */ } else if (msg[0] <= 0x2f) { - if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) + if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs)) printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], msg[1]); else -- cgit v1.2.3-70-g09d2 From ef72582e7a02e1069c6e6bf5eecf6f388b1467c6 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 15 Dec 2005 16:22:01 -0500 Subject: [SCSI] Add PPR support to spi_print_msg Introduce a new helper, print_nego() to handle SDTR/WDTR/PPR. Split out the guts of show_spi_transport_period_helper() into period_to_str() and use it in print_nego to get the period factor conversion right. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 380e1671eb1..46da6fe10ad 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -379,9 +379,7 @@ static CLASS_DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate); /* Translate the period into ns according to the current spec * for SDTR/PPR messages */ -static ssize_t -show_spi_transport_period_helper(struct class_device *cdev, char *buf, - int period) +static int period_to_str(char *buf, int period) { int len, picosec; @@ -399,6 +397,14 @@ show_spi_transport_period_helper(struct class_device *cdev, char *buf, len = sprint_frac(buf, picosec, 1000); } + return len; +} + +static ssize_t +show_spi_transport_period_helper(struct class_device *cdev, char *buf, + int period) +{ + int len = period_to_str(buf, period); buf[len++] = '\n'; buf[len] = '\0'; return len; @@ -1065,9 +1071,23 @@ static const char * const two_byte_msgs[] = { static const char * const extended_msgs[] = { /* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", -/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" +/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request", +/* 0x04 */ "Parallel Protocol Request" }; +void print_nego(const unsigned char *msg, int per, int off, int width) +{ + if (per) { + char buf[20]; + period_to_str(buf, msg[per]); + printk("period = %s ns ", buf); + } + + if (off) + printk("offset = %d ", msg[off]); + if (width) + printk("width = %d ", 8 << msg[width]); +} int spi_print_msg(const unsigned char *msg) { @@ -1085,11 +1105,13 @@ int spi_print_msg(const unsigned char *msg) (msg[4] << 16) | (msg[5] << 8) | msg[6]); break; case EXTENDED_SDTR: - printk("period = %d ns, offset = %d", - (int) msg[3] * 4, (int) msg[4]); + print_nego(msg, 3, 4, 0); break; case EXTENDED_WDTR: - printk("width = 2^%d bytes", msg[3]); + print_nego(msg, 0, 0, 3); + break; + case EXTENDED_PPR: + print_nego(msg, 3, 5, 6); break; default: for (i = 2; i < len; ++i) -- cgit v1.2.3-70-g09d2 From 8f23d475581adac949315e3339421e12554932c9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 29 Nov 2005 16:24:52 -0600 Subject: [SCSI] 53c700: update endian processing macros This update now allows this driver to be used on big endian bus machines that aren't parisc. To do that, the driver must set a CONFIG_53C700_BE_BUS in Kconfig to compile the right macro versions. Signed-off-by: James Bottomley --- drivers/scsi/53c700.h | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h index 362d78483d0..a8c83bb0363 100644 --- a/drivers/scsi/53c700.h +++ b/drivers/scsi/53c700.h @@ -238,21 +238,23 @@ struct NCR_700_Host_Parameters { #ifdef CONFIG_53C700_LE_ON_BE #define bE (hostdata->force_le_on_be ? 0 : 3) #define bSWAP (hostdata->force_le_on_be) -/* This is terrible, but there's no raw version of ioread32. That means - * that on a be board we swap twice (once in ioread32 and once again to - * get the value correct) */ -#define bS_to_io(x) ((hostdata->force_le_on_be) ? (x) : cpu_to_le32(x)) +#define bEBus (!hostdata->force_le_on_be) #elif defined(__BIG_ENDIAN) #define bE 3 #define bSWAP 0 -#define bS_to_io(x) (x) #elif defined(__LITTLE_ENDIAN) #define bE 0 #define bSWAP 0 -#define bS_to_io(x) (x) #else #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?" #endif +#ifndef bEBus +#ifdef CONFIG_53C700_BE_BUS +#define bEBus 1 +#else +#define bEBus 0 +#endif +#endif #define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x)) #define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x)) @@ -466,14 +468,15 @@ NCR_700_readl(struct Scsi_Host *host, __u32 reg) { const struct NCR_700_Host_Parameters *hostdata = (struct NCR_700_Host_Parameters *)host->hostdata[0]; - __u32 value = ioread32(hostdata->base + reg); + __u32 value = bEBus ? ioread32be(hostdata->base + reg) : + ioread32(hostdata->base + reg); #if 1 /* sanity check the register */ if((reg & 0x3) != 0) BUG(); #endif - return bS_to_io(value); + return value; } static inline void @@ -497,7 +500,8 @@ NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg) BUG(); #endif - iowrite32(bS_to_io(value), hostdata->base + reg); + bEBus ? iowrite32be(value, hostdata->base + reg): + iowrite32(value, hostdata->base + reg); } #endif -- cgit v1.2.3-70-g09d2 From cd453c6353ea30171d966fd1dd87c37b05bccee1 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Dec 2005 12:50:53 -0500 Subject: [SCSI] Use spi_print_msg in ncr53c8xx driver The ncr53c8xx driver had its own loop to print scsi messages. Use the SPI one instead. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/ncr53c8xx.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 243470936fa..8e1c77c81f6 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -2971,21 +2971,10 @@ struct host_data { static void ncr_print_msg(struct ccb *cp, char *label, u_char *msg) { - int i; PRINT_ADDR(cp->cmd, "%s: ", label); - printk ("%x",*msg); - if (*msg == M_EXTENDED) { - for (i = 1; i < 8; i++) { - if (i - 1 > msg[1]) - break; - printk ("-%x",msg[i]); - } - } else if ((*msg & 0xf0) == 0x20) { - printk ("-%x",msg[1]); - } - - printk(".\n"); + spi_print_msg(msg); + printk("\n"); } /*========================================================== -- cgit v1.2.3-70-g09d2 From 19c65091c133a98b20d867c94b1b1380a79e4b81 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Dec 2005 12:50:53 -0500 Subject: [SCSI] Merge sym53c8xx_comm.h and sym53c8xx_defs.h into ncr driver When the sym1 driver was in the tree, it used to share various parts of its infrastructure with the ncr driver. Now it's gone, these files are just an annoyance, so merge sym53c8xx_comm.h into ncr53c8xx.c and merge sym53c8xx_defs.h into ncr53c8xx.h. Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/ncr53c8xx.c | 734 ++++++++++++++++++++++- drivers/scsi/ncr53c8xx.h | 1263 ++++++++++++++++++++++++++++++++++++++- drivers/scsi/sym53c8xx_comm.h | 792 ------------------------- drivers/scsi/sym53c8xx_defs.h | 1320 ----------------------------------------- 4 files changed, 1995 insertions(+), 2114 deletions(-) delete mode 100644 drivers/scsi/sym53c8xx_comm.h delete mode 100644 drivers/scsi/sym53c8xx_defs.h (limited to 'drivers') diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 8e1c77c81f6..32350707b94 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -131,7 +131,739 @@ #define NAME53C "ncr53c" #define NAME53C8XX "ncr53c8xx" -#include "sym53c8xx_comm.h" + +/*========================================================== +** +** Debugging tags +** +**========================================================== +*/ + +#define DEBUG_ALLOC (0x0001) +#define DEBUG_PHASE (0x0002) +#define DEBUG_QUEUE (0x0008) +#define DEBUG_RESULT (0x0010) +#define DEBUG_POINTER (0x0020) +#define DEBUG_SCRIPT (0x0040) +#define DEBUG_TINY (0x0080) +#define DEBUG_TIMING (0x0100) +#define DEBUG_NEGO (0x0200) +#define DEBUG_TAGS (0x0400) +#define DEBUG_SCATTER (0x0800) +#define DEBUG_IC (0x1000) + +/* +** Enable/Disable debug messages. +** Can be changed at runtime too. +*/ + +#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT +static int ncr_debug = SCSI_NCR_DEBUG_FLAGS; + #define DEBUG_FLAGS ncr_debug +#else + #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS +#endif + +static inline struct list_head *ncr_list_pop(struct list_head *head) +{ + if (!list_empty(head)) { + struct list_head *elem = head->next; + + list_del(elem); + return elem; + } + + return NULL; +} + +/*========================================================== +** +** Simple power of two buddy-like allocator. +** +** This simple code is not intended to be fast, but to +** provide power of 2 aligned memory allocations. +** Since the SCRIPTS processor only supplies 8 bit +** arithmetic, this allocator allows simple and fast +** address calculations from the SCRIPTS code. +** In addition, cache line alignment is guaranteed for +** power of 2 cache line size. +** Enhanced in linux-2.3.44 to provide a memory pool +** per pcidev to support dynamic dma mapping. (I would +** have preferred a real bus astraction, btw). +** +**========================================================== +*/ + +#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ +#if PAGE_SIZE >= 8192 +#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ +#else +#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */ +#endif +#define MEMO_FREE_UNUSED /* Free unused pages immediately */ +#define MEMO_WARN 1 +#define MEMO_GFP_FLAGS GFP_ATOMIC +#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) +#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) +#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) + +typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ +typedef struct device *m_bush_t; /* Something that addresses DMAable */ + +typedef struct m_link { /* Link between free memory chunks */ + struct m_link *next; +} m_link_s; + +typedef struct m_vtob { /* Virtual to Bus address translation */ + struct m_vtob *next; + m_addr_t vaddr; + m_addr_t baddr; +} m_vtob_s; +#define VTOB_HASH_SHIFT 5 +#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) +#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) +#define VTOB_HASH_CODE(m) \ + ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) + +typedef struct m_pool { /* Memory pool of a given kind */ + m_bush_t bush; + m_addr_t (*getp)(struct m_pool *); + void (*freep)(struct m_pool *, m_addr_t); + int nump; + m_vtob_s *(vtob[VTOB_HASH_SIZE]); + struct m_pool *next; + struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1]; +} m_pool_s; + +static void *___m_alloc(m_pool_s *mp, int size) +{ + int i = 0; + int s = (1 << MEMO_SHIFT); + int j; + m_addr_t a; + m_link_s *h = mp->h; + + if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) + return NULL; + + while (size > s) { + s <<= 1; + ++i; + } + + j = i; + while (!h[j].next) { + if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { + h[j].next = (m_link_s *)mp->getp(mp); + if (h[j].next) + h[j].next->next = NULL; + break; + } + ++j; + s <<= 1; + } + a = (m_addr_t) h[j].next; + if (a) { + h[j].next = h[j].next->next; + while (j > i) { + j -= 1; + s >>= 1; + h[j].next = (m_link_s *) (a+s); + h[j].next->next = NULL; + } + } +#ifdef DEBUG + printk("___m_alloc(%d) = %p\n", size, (void *) a); +#endif + return (void *) a; +} + +static void ___m_free(m_pool_s *mp, void *ptr, int size) +{ + int i = 0; + int s = (1 << MEMO_SHIFT); + m_link_s *q; + m_addr_t a, b; + m_link_s *h = mp->h; + +#ifdef DEBUG + printk("___m_free(%p, %d)\n", ptr, size); +#endif + + if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) + return; + + while (size > s) { + s <<= 1; + ++i; + } + + a = (m_addr_t) ptr; + + while (1) { +#ifdef MEMO_FREE_UNUSED + if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { + mp->freep(mp, a); + break; + } +#endif + b = a ^ s; + q = &h[i]; + while (q->next && q->next != (m_link_s *) b) { + q = q->next; + } + if (!q->next) { + ((m_link_s *) a)->next = h[i].next; + h[i].next = (m_link_s *) a; + break; + } + q->next = q->next->next; + a = a & b; + s <<= 1; + ++i; + } +} + +static DEFINE_SPINLOCK(ncr53c8xx_lock); + +static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags) +{ + void *p; + + p = ___m_alloc(mp, size); + + if (DEBUG_FLAGS & DEBUG_ALLOC) + printk ("new %-10s[%4d] @%p.\n", name, size, p); + + if (p) + memset(p, 0, size); + else if (uflags & MEMO_WARN) + printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size); + + return p; +} + +#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN) + +static void __m_free(m_pool_s *mp, void *ptr, int size, char *name) +{ + if (DEBUG_FLAGS & DEBUG_ALLOC) + printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr); + + ___m_free(mp, ptr, size); + +} + +/* + * With pci bus iommu support, we use a default pool of unmapped memory + * for memory we donnot need to DMA from/to and one pool per pcidev for + * memory accessed by the PCI chip. `mp0' is the default not DMAable pool. + */ + +static m_addr_t ___mp0_getp(m_pool_s *mp) +{ + m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER); + if (m) + ++mp->nump; + return m; +} + +static void ___mp0_freep(m_pool_s *mp, m_addr_t m) +{ + free_pages(m, MEMO_PAGE_ORDER); + --mp->nump; +} + +static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep}; + +/* + * DMAable pools. + */ + +/* + * With pci bus iommu support, we maintain one pool per pcidev and a + * hashed reverse table for virtual to bus physical address translations. + */ +static m_addr_t ___dma_getp(m_pool_s *mp) +{ + m_addr_t vp; + m_vtob_s *vbp; + + vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB"); + if (vbp) { + dma_addr_t daddr; + vp = (m_addr_t) dma_alloc_coherent(mp->bush, + PAGE_SIZE<vaddr = vp; + vbp->baddr = daddr; + vbp->next = mp->vtob[hc]; + mp->vtob[hc] = vbp; + ++mp->nump; + return vp; + } + } + if (vbp) + __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); + return 0; +} + +static void ___dma_freep(m_pool_s *mp, m_addr_t m) +{ + m_vtob_s **vbpp, *vbp; + int hc = VTOB_HASH_CODE(m); + + vbpp = &mp->vtob[hc]; + while (*vbpp && (*vbpp)->vaddr != m) + vbpp = &(*vbpp)->next; + if (*vbpp) { + vbp = *vbpp; + *vbpp = (*vbpp)->next; + dma_free_coherent(mp->bush, PAGE_SIZE<vaddr, (dma_addr_t)vbp->baddr); + __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); + --mp->nump; + } +} + +static inline m_pool_s *___get_dma_pool(m_bush_t bush) +{ + m_pool_s *mp; + for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next); + return mp; +} + +static m_pool_s *___cre_dma_pool(m_bush_t bush) +{ + m_pool_s *mp; + mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL"); + if (mp) { + memset(mp, 0, sizeof(*mp)); + mp->bush = bush; + mp->getp = ___dma_getp; + mp->freep = ___dma_freep; + mp->next = mp0.next; + mp0.next = mp; + } + return mp; +} + +static void ___del_dma_pool(m_pool_s *p) +{ + struct m_pool **pp = &mp0.next; + + while (*pp && *pp != p) + pp = &(*pp)->next; + if (*pp) { + *pp = (*pp)->next; + __m_free(&mp0, p, sizeof(*p), "MPOOL"); + } +} + +static void *__m_calloc_dma(m_bush_t bush, int size, char *name) +{ + u_long flags; + struct m_pool *mp; + void *m = NULL; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (!mp) + mp = ___cre_dma_pool(bush); + if (mp) + m = __m_calloc(mp, size, name); + if (mp && !mp->nump) + ___del_dma_pool(mp); + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); + + return m; +} + +static void __m_free_dma(m_bush_t bush, void *m, int size, char *name) +{ + u_long flags; + struct m_pool *mp; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (mp) + __m_free(mp, m, size, name); + if (mp && !mp->nump) + ___del_dma_pool(mp); + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); +} + +static m_addr_t __vtobus(m_bush_t bush, void *m) +{ + u_long flags; + m_pool_s *mp; + int hc = VTOB_HASH_CODE(m); + m_vtob_s *vp = NULL; + m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (mp) { + vp = mp->vtob[hc]; + while (vp && (m_addr_t) vp->vaddr != a) + vp = vp->next; + } + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); + return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; +} + +#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n) +#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n) +#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n) +#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n) +#define _vtobus(np, p) __vtobus(np->dev, p) +#define vtobus(p) _vtobus(np, p) + +/* + * Deal with DMA mapping/unmapping. + */ + +/* To keep track of the dma mapping (sg/single) that has been set */ +#define __data_mapped SCp.phase +#define __data_mapping SCp.have_data_in + +static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd) +{ + switch(cmd->__data_mapped) { + case 2: + dma_unmap_sg(dev, cmd->buffer, cmd->use_sg, + cmd->sc_data_direction); + break; + case 1: + dma_unmap_single(dev, cmd->__data_mapping, + cmd->request_bufflen, + cmd->sc_data_direction); + break; + } + cmd->__data_mapped = 0; +} + +static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd) +{ + dma_addr_t mapping; + + if (cmd->request_bufflen == 0) + return 0; + + mapping = dma_map_single(dev, cmd->request_buffer, + cmd->request_bufflen, + cmd->sc_data_direction); + cmd->__data_mapped = 1; + cmd->__data_mapping = mapping; + + return mapping; +} + +static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd) +{ + int use_sg; + + if (cmd->use_sg == 0) + return 0; + + use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg, + cmd->sc_data_direction); + cmd->__data_mapped = 2; + cmd->__data_mapping = use_sg; + + return use_sg; +} + +#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd) +#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd) +#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd) + +/*========================================================== +** +** Driver setup. +** +** This structure is initialized from linux config +** options. It can be overridden at boot-up by the boot +** command line. +** +**========================================================== +*/ +static struct ncr_driver_setup + driver_setup = SCSI_NCR_DRIVER_SETUP; + +#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT +static struct ncr_driver_setup + driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP; +#endif + +#define initverbose (driver_setup.verbose) +#define bootverbose (np->verbose) + + +/*=================================================================== +** +** Driver setup from the boot command line +** +**=================================================================== +*/ + +#ifdef MODULE +#define ARG_SEP ' ' +#else +#define ARG_SEP ',' +#endif + +#define OPT_TAGS 1 +#define OPT_MASTER_PARITY 2 +#define OPT_SCSI_PARITY 3 +#define OPT_DISCONNECTION 4 +#define OPT_SPECIAL_FEATURES 5 +#define OPT_UNUSED_1 6 +#define OPT_FORCE_SYNC_NEGO 7 +#define OPT_REVERSE_PROBE 8 +#define OPT_DEFAULT_SYNC 9 +#define OPT_VERBOSE 10 +#define OPT_DEBUG 11 +#define OPT_BURST_MAX 12 +#define OPT_LED_PIN 13 +#define OPT_MAX_WIDE 14 +#define OPT_SETTLE_DELAY 15 +#define OPT_DIFF_SUPPORT 16 +#define OPT_IRQM 17 +#define OPT_PCI_FIX_UP 18 +#define OPT_BUS_CHECK 19 +#define OPT_OPTIMIZE 20 +#define OPT_RECOVERY 21 +#define OPT_SAFE_SETUP 22 +#define OPT_USE_NVRAM 23 +#define OPT_EXCLUDE 24 +#define OPT_HOST_ID 25 + +#ifdef SCSI_NCR_IARB_SUPPORT +#define OPT_IARB 26 +#endif + +static char setup_token[] __initdata = + "tags:" "mpar:" + "spar:" "disc:" + "specf:" "ultra:" + "fsn:" "revprob:" + "sync:" "verb:" + "debug:" "burst:" + "led:" "wide:" + "settle:" "diff:" + "irqm:" "pcifix:" + "buschk:" "optim:" + "recovery:" + "safe:" "nvram:" + "excl:" "hostid:" +#ifdef SCSI_NCR_IARB_SUPPORT + "iarb:" +#endif + ; /* DONNOT REMOVE THIS ';' */ + +#ifdef MODULE +#define ARG_SEP ' ' +#else +#define ARG_SEP ',' +#endif + +static int __init get_setup_token(char *p) +{ + char *cur = setup_token; + char *pc; + int i = 0; + + while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { + ++pc; + ++i; + if (!strncmp(p, cur, pc - cur)) + return i; + cur = pc; + } + return 0; +} + + +static int __init sym53c8xx__setup(char *str) +{ +#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT + char *cur = str; + char *pc, *pv; + int i, val, c; + int xi = 0; + + while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { + char *pe; + + val = 0; + pv = pc; + c = *++pv; + + if (c == 'n') + val = 0; + else if (c == 'y') + val = 1; + else + val = (int) simple_strtoul(pv, &pe, 0); + + switch (get_setup_token(cur)) { + case OPT_TAGS: + driver_setup.default_tags = val; + if (pe && *pe == '/') { + i = 0; + while (*pe && *pe != ARG_SEP && + i < sizeof(driver_setup.tag_ctrl)-1) { + driver_setup.tag_ctrl[i++] = *pe++; + } + driver_setup.tag_ctrl[i] = '\0'; + } + break; + case OPT_MASTER_PARITY: + driver_setup.master_parity = val; + break; + case OPT_SCSI_PARITY: + driver_setup.scsi_parity = val; + break; + case OPT_DISCONNECTION: + driver_setup.disconnection = val; + break; + case OPT_SPECIAL_FEATURES: + driver_setup.special_features = val; + break; + case OPT_FORCE_SYNC_NEGO: + driver_setup.force_sync_nego = val; + break; + case OPT_REVERSE_PROBE: + driver_setup.reverse_probe = val; + break; + case OPT_DEFAULT_SYNC: + driver_setup.default_sync = val; + break; + case OPT_VERBOSE: + driver_setup.verbose = val; + break; + case OPT_DEBUG: + driver_setup.debug = val; + break; + case OPT_BURST_MAX: + driver_setup.burst_max = val; + break; + case OPT_LED_PIN: + driver_setup.led_pin = val; + break; + case OPT_MAX_WIDE: + driver_setup.max_wide = val? 1:0; + break; + case OPT_SETTLE_DELAY: + driver_setup.settle_delay = val; + break; + case OPT_DIFF_SUPPORT: + driver_setup.diff_support = val; + break; + case OPT_IRQM: + driver_setup.irqm = val; + break; + case OPT_PCI_FIX_UP: + driver_setup.pci_fix_up = val; + break; + case OPT_BUS_CHECK: + driver_setup.bus_check = val; + break; + case OPT_OPTIMIZE: + driver_setup.optimize = val; + break; + case OPT_RECOVERY: + driver_setup.recovery = val; + break; + case OPT_USE_NVRAM: + driver_setup.use_nvram = val; + break; + case OPT_SAFE_SETUP: + memcpy(&driver_setup, &driver_safe_setup, + sizeof(driver_setup)); + break; + case OPT_EXCLUDE: + if (xi < SCSI_NCR_MAX_EXCLUDES) + driver_setup.excludes[xi++] = val; + break; + case OPT_HOST_ID: + driver_setup.host_id = val; + break; +#ifdef SCSI_NCR_IARB_SUPPORT + case OPT_IARB: + driver_setup.iarb = val; + break; +#endif + default: + printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur); + break; + } + + if ((cur = strchr(cur, ARG_SEP)) != NULL) + ++cur; + } +#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */ + return 1; +} + +/*=================================================================== +** +** Get device queue depth from boot command line. +** +**=================================================================== +*/ +#define DEF_DEPTH (driver_setup.default_tags) +#define ALL_TARGETS -2 +#define NO_TARGET -1 +#define ALL_LUNS -2 +#define NO_LUN -1 + +static int device_queue_depth(int unit, int target, int lun) +{ + int c, h, t, u, v; + char *p = driver_setup.tag_ctrl; + char *ep; + + h = -1; + t = NO_TARGET; + u = NO_LUN; + while ((c = *p++) != 0) { + v = simple_strtoul(p, &ep, 0); + switch(c) { + case '/': + ++h; + t = ALL_TARGETS; + u = ALL_LUNS; + break; + case 't': + if (t != target) + t = (target == v) ? v : NO_TARGET; + u = ALL_LUNS; + break; + case 'u': + if (u != lun) + u = (lun == v) ? v : NO_LUN; + break; + case 'q': + if (h == unit && + (t == ALL_TARGETS || t == target) && + (u == ALL_LUNS || u == lun)) + return v; + break; + case '-': + t = ALL_TARGETS; + u = ALL_LUNS; + break; + default: + break; + } + p = ep; + } + return DEF_DEPTH; +} /*========================================================== diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h index 05c7b83cef0..6a7bef2e611 100644 --- a/drivers/scsi/ncr53c8xx.h +++ b/drivers/scsi/ncr53c8xx.h @@ -2,6 +2,7 @@ ** Device driver for the PCI-SCSI NCR538XX controller family. ** ** Copyright (C) 1994 Wolfgang Stanglmeier +** Copyright (C) 1998-2001 Gerard Roudier ** ** This program is free software; you can redistribute it and/or modify ** it under the terms of the GNU General Public License as published by @@ -36,15 +37,1275 @@ ** And has been ported to NetBSD by ** Charles M. Hannum ** +** NVRAM detection and reading. +** Copyright (C) 1997 Richard Waltham +** +** Added support for MIPS big endian systems. +** Carsten Langgaard, carstenl@mips.com +** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. +** +** Added support for HP PARISC big endian systems. +** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. +** ******************************************************************************* */ #ifndef NCR53C8XX_H #define NCR53C8XX_H +#include #include -#include "sym53c8xx_defs.h" +/* +** If you want a driver as small as possible, do not define the +** following options. +*/ +#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT +#define SCSI_NCR_DEBUG_INFO_SUPPORT + +/* +** To disable integrity checking, do not define the +** following option. +*/ +#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK +# define SCSI_NCR_ENABLE_INTEGRITY_CHECK +#endif + +/* --------------------------------------------------------------------- +** Take into account kernel configured parameters. +** Most of these options can be overridden at startup by a command line. +** --------------------------------------------------------------------- +*/ + +/* + * For Ultra2 and Ultra3 SCSI support option, use special features. + * + * Value (default) means: + * bit 0 : all features enabled, except: + * bit 1 : PCI Write And Invalidate. + * bit 2 : Data Phase Mismatch handling from SCRIPTS. + * + * Use boot options ncr53c8xx=specf:1 if you want all chip features to be + * enabled by the driver. + */ +#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3) + +#define SCSI_NCR_MAX_SYNC (80) + +/* + * Allow tags from 2 to 256, default 8 + */ +#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS +#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2 +#define SCSI_NCR_MAX_TAGS (2) +#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256 +#define SCSI_NCR_MAX_TAGS (256) +#else +#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS +#endif +#else +#define SCSI_NCR_MAX_TAGS (8) +#endif + +/* + * Allow tagged command queuing support if configured with default number + * of tags set to max (see above). + */ +#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS +#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS +#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE +#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS +#else +#define SCSI_NCR_SETUP_DEFAULT_TAGS (0) +#endif + +/* + * Immediate arbitration + */ +#if defined(CONFIG_SCSI_NCR53C8XX_IARB) +#define SCSI_NCR_IARB_SUPPORT +#endif + +/* + * Sync transfer frequency at startup. + * Allow from 5Mhz to 80Mhz default 20 Mhz. + */ +#ifndef CONFIG_SCSI_NCR53C8XX_SYNC +#define CONFIG_SCSI_NCR53C8XX_SYNC (20) +#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC +#undef CONFIG_SCSI_NCR53C8XX_SYNC +#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC +#endif + +#if CONFIG_SCSI_NCR53C8XX_SYNC == 0 +#define SCSI_NCR_SETUP_DEFAULT_SYNC (255) +#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5 +#define SCSI_NCR_SETUP_DEFAULT_SYNC (50) +#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20 +#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC)) +#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33 +#define SCSI_NCR_SETUP_DEFAULT_SYNC (11) +#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40 +#define SCSI_NCR_SETUP_DEFAULT_SYNC (10) +#else +#define SCSI_NCR_SETUP_DEFAULT_SYNC (9) +#endif + +/* + * Disallow disconnections at boot-up + */ +#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT +#define SCSI_NCR_SETUP_DISCONNECTION (0) +#else +#define SCSI_NCR_SETUP_DISCONNECTION (1) +#endif + +/* + * Force synchronous negotiation for all targets + */ +#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO +#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1) +#else +#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0) +#endif + +/* + * Disable master parity checking (flawed hardwares need that) + */ +#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK +#define SCSI_NCR_SETUP_MASTER_PARITY (0) +#else +#define SCSI_NCR_SETUP_MASTER_PARITY (1) +#endif + +/* + * Disable scsi parity checking (flawed devices may need that) + */ +#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK +#define SCSI_NCR_SETUP_SCSI_PARITY (0) +#else +#define SCSI_NCR_SETUP_SCSI_PARITY (1) +#endif + +/* + * Settle time after reset at boot-up + */ +#define SCSI_NCR_SETUP_SETTLE_TIME (2) + +/* +** Bridge quirks work-around option defaulted to 1. +*/ +#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT +#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1 +#endif + +/* +** Work-around common bridge misbehaviour. +** +** - Do not flush posted writes in the opposite +** direction on read. +** - May reorder DMA writes to memory. +** +** This option should not affect performances +** significantly, so it is the default. +*/ +#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1 +#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM +#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES +#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS + +/* +** Same as option 1, but also deal with +** misconfigured interrupts. +** +** - Edge triggerred instead of level sensitive. +** - No interrupt line connected. +** - IRQ number misconfigured. +** +** If no interrupt is delivered, the driver will +** catch the interrupt conditions 10 times per +** second. No need to say that this option is +** not recommended. +*/ +#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2 +#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM +#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES +#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS +#define SCSI_NCR_PCIQ_BROKEN_INTR + +/* +** Some bridge designers decided to flush +** everything prior to deliver the interrupt. +** This option tries to deal with such a +** behaviour. +*/ +#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3 +#define SCSI_NCR_PCIQ_SYNC_ON_INTR +#endif + +/* +** Other parameters not configurable with "make config" +** Avoid to change these constants, unless you know what you are doing. +*/ + +#define SCSI_NCR_ALWAYS_SIMPLE_TAG +#define SCSI_NCR_MAX_SCATTER (127) +#define SCSI_NCR_MAX_TARGET (16) + +/* +** Compute some desirable value for CAN_QUEUE +** and CMD_PER_LUN. +** The driver will use lower values if these +** ones appear to be too large. +*/ +#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET) +#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS) + +#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER) +#define SCSI_NCR_TIMER_INTERVAL (HZ) + +#if 1 /* defined CONFIG_SCSI_MULTI_LUN */ +#define SCSI_NCR_MAX_LUN (16) +#else +#define SCSI_NCR_MAX_LUN (1) +#endif + +/* + * IO functions definition for big/little endian CPU support. + * For now, the NCR is only supported in little endian addressing mode, + */ + +#ifdef __BIG_ENDIAN + +#define inw_l2b inw +#define inl_l2b inl +#define outw_b2l outw +#define outl_b2l outl + +#define readb_raw readb +#define writeb_raw writeb + +#if defined(SCSI_NCR_BIG_ENDIAN) +#define readw_l2b __raw_readw +#define readl_l2b __raw_readl +#define writew_b2l __raw_writew +#define writel_b2l __raw_writel +#define readw_raw __raw_readw +#define readl_raw __raw_readl +#define writew_raw __raw_writew +#define writel_raw __raw_writel +#else /* Other big-endian */ +#define readw_l2b readw +#define readl_l2b readl +#define writew_b2l writew +#define writel_b2l writel +#define readw_raw readw +#define readl_raw readl +#define writew_raw writew +#define writel_raw writel +#endif + +#else /* little endian */ + +#define inw_raw inw +#define inl_raw inl +#define outw_raw outw +#define outl_raw outl + +#define readb_raw readb +#define readw_raw readw +#define readl_raw readl +#define writeb_raw writeb +#define writew_raw writew +#define writel_raw writel + +#endif + +#if !defined(__hppa__) && !defined(__mips__) +#ifdef SCSI_NCR_BIG_ENDIAN +#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported" +#endif +#endif + +#define MEMORY_BARRIER() mb() + + +/* + * If the NCR uses big endian addressing mode over the + * PCI, actual io register addresses for byte and word + * accesses must be changed according to lane routing. + * Btw, ncr_offb() and ncr_offw() macros only apply to + * constants and so donnot generate bloated code. + */ + +#if defined(SCSI_NCR_BIG_ENDIAN) + +#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3)) +#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2)) + +#else + +#define ncr_offb(o) (o) +#define ncr_offw(o) (o) + +#endif + +/* + * If the CPU and the NCR use same endian-ness addressing, + * no byte reordering is needed for script patching. + * Macro cpu_to_scr() is to be used for script patching. + * Macro scr_to_cpu() is to be used for getting a DWORD + * from the script. + */ + +#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) + +#define cpu_to_scr(dw) cpu_to_le32(dw) +#define scr_to_cpu(dw) le32_to_cpu(dw) + +#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) + +#define cpu_to_scr(dw) cpu_to_be32(dw) +#define scr_to_cpu(dw) be32_to_cpu(dw) + +#else + +#define cpu_to_scr(dw) (dw) +#define scr_to_cpu(dw) (dw) + +#endif + +/* + * Access to the controller chip. + * + * If the CPU and the NCR use same endian-ness addressing, + * no byte reordering is needed for accessing chip io + * registers. Functions suffixed by '_raw' are assumed + * to access the chip over the PCI without doing byte + * reordering. Functions suffixed by '_l2b' are + * assumed to perform little-endian to big-endian byte + * reordering, those suffixed by '_b2l' blah, blah, + * blah, ... + */ + +/* + * MEMORY mapped IO input / output + */ + +#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o)) +#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o)) + +#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) + +#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o)) +#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o)) + +#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o)) +#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o)) + +#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) + +#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o)) +#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o)) + +#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o)) +#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o)) + +#else + +#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS +/* Only 8 or 32 bit transfers allowed */ +#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1)) +#else +#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o)) +#endif +#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o)) + +#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS +/* Only 8 or 32 bit transfers allowed */ +#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0) +#else +#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o)) +#endif +#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o)) + +#endif + +#define INB(r) INB_OFF (offsetof(struct ncr_reg,r)) +#define INW(r) INW_OFF (offsetof(struct ncr_reg,r)) +#define INL(r) INL_OFF (offsetof(struct ncr_reg,r)) + +#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val)) +#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val)) +#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val)) + +/* + * Set bit field ON, OFF + */ + +#define OUTONB(r, m) OUTB(r, INB(r) | (m)) +#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) +#define OUTONW(r, m) OUTW(r, INW(r) | (m)) +#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) +#define OUTONL(r, m) OUTL(r, INL(r) | (m)) +#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) + +/* + * We normally want the chip to have a consistent view + * of driver internal data structures when we restart it. + * Thus these macros. + */ +#define OUTL_DSP(v) \ + do { \ + MEMORY_BARRIER(); \ + OUTL (nc_dsp, (v)); \ + } while (0) + +#define OUTONB_STD() \ + do { \ + MEMORY_BARRIER(); \ + OUTONB (nc_dcntl, (STD|NOCOM)); \ + } while (0) + + +/* +** NCR53C8XX devices features table. +*/ +struct ncr_chip { + unsigned short revision_id; + unsigned char burst_max; /* log-base-2 of max burst */ + unsigned char offset_max; + unsigned char nr_divisor; + unsigned int features; +#define FE_LED0 (1<<0) +#define FE_WIDE (1<<1) /* Wide data transfers */ +#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */ +#define FE_DBLR (1<<4) /* Clock doubler present */ +#define FE_QUAD (1<<5) /* Clock quadrupler present */ +#define FE_ERL (1<<6) /* Enable read line */ +#define FE_CLSE (1<<7) /* Cache line size enable */ +#define FE_WRIE (1<<8) /* Write & Invalidate enable */ +#define FE_ERMP (1<<9) /* Enable read multiple */ +#define FE_BOF (1<<10) /* Burst opcode fetch */ +#define FE_DFS (1<<11) /* DMA fifo size */ +#define FE_PFEN (1<<12) /* Prefetch enable */ +#define FE_LDSTR (1<<13) /* Load/Store supported */ +#define FE_RAM (1<<14) /* On chip RAM present */ +#define FE_VARCLK (1<<15) /* SCSI clock may vary */ +#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */ +#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */ +#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */ +#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */ +#define FE_LEDC (1<<20) /* Hardware control of LED */ +#define FE_DIFF (1<<21) /* Support Differential SCSI */ +#define FE_66MHZ (1<<23) /* 66MHz PCI Support */ +#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */ +#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */ +#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */ +#define FE_EHP (1<<27) /* 720: Even host parity */ +#define FE_MUX (1<<28) /* 720: Multiplexed bus */ +#define FE_EA (1<<29) /* 720: Enable Ack */ + +#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP) +#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80) +#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM) +}; + + +/* +** Driver setup structure. +** +** This structure is initialized from linux config options. +** It can be overridden at boot-up by the boot command line. +*/ +#define SCSI_NCR_MAX_EXCLUDES 8 +struct ncr_driver_setup { + u8 master_parity; + u8 scsi_parity; + u8 disconnection; + u8 special_features; + u8 force_sync_nego; + u8 reverse_probe; + u8 pci_fix_up; + u8 use_nvram; + u8 verbose; + u8 default_tags; + u16 default_sync; + u16 debug; + u8 burst_max; + u8 led_pin; + u8 max_wide; + u8 settle_delay; + u8 diff_support; + u8 irqm; + u8 bus_check; + u8 optimize; + u8 recovery; + u8 host_id; + u16 iarb; + u32 excludes[SCSI_NCR_MAX_EXCLUDES]; + char tag_ctrl[100]; +}; + +/* +** Initial setup. +** Can be overriden at startup by a command line. +*/ +#define SCSI_NCR_DRIVER_SETUP \ +{ \ + SCSI_NCR_SETUP_MASTER_PARITY, \ + SCSI_NCR_SETUP_SCSI_PARITY, \ + SCSI_NCR_SETUP_DISCONNECTION, \ + SCSI_NCR_SETUP_SPECIAL_FEATURES, \ + SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \ + 0, \ + 0, \ + 1, \ + 0, \ + SCSI_NCR_SETUP_DEFAULT_TAGS, \ + SCSI_NCR_SETUP_DEFAULT_SYNC, \ + 0x00, \ + 7, \ + 0, \ + 1, \ + SCSI_NCR_SETUP_SETTLE_TIME, \ + 0, \ + 0, \ + 1, \ + 0, \ + 0, \ + 255, \ + 0x00 \ +} + +/* +** Boot fail safe setup. +** Override initial setup from boot command line: +** ncr53c8xx=safe:y +*/ +#define SCSI_NCR_DRIVER_SAFE_SETUP \ +{ \ + 0, \ + 1, \ + 0, \ + 0, \ + 0, \ + 0, \ + 0, \ + 1, \ + 2, \ + 0, \ + 255, \ + 0x00, \ + 255, \ + 0, \ + 0, \ + 10, \ + 1, \ + 1, \ + 1, \ + 0, \ + 0, \ + 255 \ +} + +/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/ + +/*----------------------------------------------------------------- +** +** The ncr 53c810 register structure. +** +**----------------------------------------------------------------- +*/ + +struct ncr_reg { +/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */ + +/*01*/ u8 nc_scntl1; /* no reset */ + #define ISCON 0x10 /* connected to scsi */ + #define CRST 0x08 /* force reset */ + #define IARB 0x02 /* immediate arbitration */ + +/*02*/ u8 nc_scntl2; /* no disconnect expected */ + #define SDU 0x80 /* cmd: disconnect will raise error */ + #define CHM 0x40 /* sta: chained mode */ + #define WSS 0x08 /* sta: wide scsi send [W]*/ + #define WSR 0x01 /* sta: wide scsi received [W]*/ + +/*03*/ u8 nc_scntl3; /* cnf system clock dependent */ + #define EWS 0x08 /* cmd: enable wide scsi [W]*/ + #define ULTRA 0x80 /* cmd: ULTRA enable */ + /* bits 0-2, 7 rsvd for C1010 */ + +/*04*/ u8 nc_scid; /* cnf host adapter scsi address */ + #define RRE 0x40 /* r/w:e enable response to resel. */ + #define SRE 0x20 /* r/w:e enable response to select */ + +/*05*/ u8 nc_sxfer; /* ### Sync speed and count */ + /* bits 6-7 rsvd for C1010 */ + +/*06*/ u8 nc_sdid; /* ### Destination-ID */ + +/*07*/ u8 nc_gpreg; /* ??? IO-Pins */ + +/*08*/ u8 nc_sfbr; /* ### First byte in phase */ + +/*09*/ u8 nc_socl; + #define CREQ 0x80 /* r/w: SCSI-REQ */ + #define CACK 0x40 /* r/w: SCSI-ACK */ + #define CBSY 0x20 /* r/w: SCSI-BSY */ + #define CSEL 0x10 /* r/w: SCSI-SEL */ + #define CATN 0x08 /* r/w: SCSI-ATN */ + #define CMSG 0x04 /* r/w: SCSI-MSG */ + #define CC_D 0x02 /* r/w: SCSI-C_D */ + #define CI_O 0x01 /* r/w: SCSI-I_O */ + +/*0a*/ u8 nc_ssid; + +/*0b*/ u8 nc_sbcl; + +/*0c*/ u8 nc_dstat; + #define DFE 0x80 /* sta: dma fifo empty */ + #define MDPE 0x40 /* int: master data parity error */ + #define BF 0x20 /* int: script: bus fault */ + #define ABRT 0x10 /* int: script: command aborted */ + #define SSI 0x08 /* int: script: single step */ + #define SIR 0x04 /* int: script: interrupt instruct. */ + #define IID 0x01 /* int: script: illegal instruct. */ + +/*0d*/ u8 nc_sstat0; + #define ILF 0x80 /* sta: data in SIDL register lsb */ + #define ORF 0x40 /* sta: data in SODR register lsb */ + #define OLF 0x20 /* sta: data in SODL register lsb */ + #define AIP 0x10 /* sta: arbitration in progress */ + #define LOA 0x08 /* sta: arbitration lost */ + #define WOA 0x04 /* sta: arbitration won */ + #define IRST 0x02 /* sta: scsi reset signal */ + #define SDP 0x01 /* sta: scsi parity signal */ + +/*0e*/ u8 nc_sstat1; + #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ + +/*0f*/ u8 nc_sstat2; + #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ + #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ + #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ + #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */ + #define LDSC 0x02 /* sta: disconnect & reconnect */ + +/*10*/ u8 nc_dsa; /* --> Base page */ +/*11*/ u8 nc_dsa1; +/*12*/ u8 nc_dsa2; +/*13*/ u8 nc_dsa3; + +/*14*/ u8 nc_istat; /* --> Main Command and status */ + #define CABRT 0x80 /* cmd: abort current operation */ + #define SRST 0x40 /* mod: reset chip */ + #define SIGP 0x20 /* r/w: message from host to ncr */ + #define SEM 0x10 /* r/w: message between host + ncr */ + #define CON 0x08 /* sta: connected to scsi */ + #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ + #define SIP 0x02 /* sta: scsi-interrupt */ + #define DIP 0x01 /* sta: host/script interrupt */ + +/*15*/ u8 nc_istat1; /* 896 and later cores only */ + #define FLSH 0x04 /* sta: chip is flushing */ + #define SRUN 0x02 /* sta: scripts are running */ + #define SIRQD 0x01 /* r/w: disable INT pin */ + +/*16*/ u8 nc_mbox0; /* 896 and later cores only */ +/*17*/ u8 nc_mbox1; /* 896 and later cores only */ + +/*18*/ u8 nc_ctest0; + #define EHP 0x04 /* 720 even host parity */ +/*19*/ u8 nc_ctest1; + +/*1a*/ u8 nc_ctest2; + #define CSIGP 0x40 + /* bits 0-2,7 rsvd for C1010 */ + +/*1b*/ u8 nc_ctest3; + #define FLF 0x08 /* cmd: flush dma fifo */ + #define CLF 0x04 /* cmd: clear dma fifo */ + #define FM 0x02 /* mod: fetch pin mode */ + #define WRIE 0x01 /* mod: write and invalidate enable */ + /* bits 4-7 rsvd for C1010 */ + +/*1c*/ u32 nc_temp; /* ### Temporary stack */ + +/*20*/ u8 nc_dfifo; +/*21*/ u8 nc_ctest4; + #define MUX 0x80 /* 720 host bus multiplex mode */ + #define BDIS 0x80 /* mod: burst disable */ + #define MPEE 0x08 /* mod: master parity error enable */ + +/*22*/ u8 nc_ctest5; + #define DFS 0x20 /* mod: dma fifo size */ + /* bits 0-1, 3-7 rsvd for C1010 */ +/*23*/ u8 nc_ctest6; + +/*24*/ u32 nc_dbc; /* ### Byte count and command */ +/*28*/ u32 nc_dnad; /* ### Next command register */ +/*2c*/ u32 nc_dsp; /* --> Script Pointer */ +/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */ + +/*34*/ u8 nc_scratcha; /* Temporary register a */ +/*35*/ u8 nc_scratcha1; +/*36*/ u8 nc_scratcha2; +/*37*/ u8 nc_scratcha3; + +/*38*/ u8 nc_dmode; + #define BL_2 0x80 /* mod: burst length shift value +2 */ + #define BL_1 0x40 /* mod: burst length shift value +1 */ + #define ERL 0x08 /* mod: enable read line */ + #define ERMP 0x04 /* mod: enable read multiple */ + #define BOF 0x02 /* mod: burst op code fetch */ + +/*39*/ u8 nc_dien; +/*3a*/ u8 nc_sbr; + +/*3b*/ u8 nc_dcntl; /* --> Script execution control */ + #define CLSE 0x80 /* mod: cache line size enable */ + #define PFF 0x40 /* cmd: pre-fetch flush */ + #define PFEN 0x20 /* mod: pre-fetch enable */ + #define EA 0x20 /* mod: 720 enable-ack */ + #define SSM 0x10 /* mod: single step mode */ + #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ + #define STD 0x04 /* cmd: start dma mode */ + #define IRQD 0x02 /* mod: irq disable */ + #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ + /* bits 0-1 rsvd for C1010 */ + +/*3c*/ u32 nc_adder; + +/*40*/ u16 nc_sien; /* -->: interrupt enable */ +/*42*/ u16 nc_sist; /* <--: interrupt status */ + #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */ + #define STO 0x0400/* sta: timeout (select) */ + #define GEN 0x0200/* sta: timeout (general) */ + #define HTH 0x0100/* sta: timeout (handshake) */ + #define MA 0x80 /* sta: phase mismatch */ + #define CMP 0x40 /* sta: arbitration complete */ + #define SEL 0x20 /* sta: selected by another device */ + #define RSL 0x10 /* sta: reselected by another device*/ + #define SGE 0x08 /* sta: gross error (over/underflow)*/ + #define UDC 0x04 /* sta: unexpected disconnect */ + #define RST 0x02 /* sta: scsi bus reset detected */ + #define PAR 0x01 /* sta: scsi parity error */ + +/*44*/ u8 nc_slpar; +/*45*/ u8 nc_swide; +/*46*/ u8 nc_macntl; +/*47*/ u8 nc_gpcntl; +/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/ +/*49*/ u8 nc_stime1; /* cmd: timeout user defined */ +/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */ + +/*4c*/ u8 nc_stest0; + +/*4d*/ u8 nc_stest1; + #define SCLK 0x80 /* Use the PCI clock as SCSI clock */ + #define DBLEN 0x08 /* clock doubler running */ + #define DBLSEL 0x04 /* clock doubler selected */ + + +/*4e*/ u8 nc_stest2; + #define ROF 0x40 /* reset scsi offset (after gross error!) */ + #define DIF 0x20 /* 720 SCSI differential mode */ + #define EXT 0x02 /* extended filtering */ + +/*4f*/ u8 nc_stest3; + #define TE 0x80 /* c: tolerAnt enable */ + #define HSC 0x20 /* c: Halt SCSI Clock */ + #define CSF 0x02 /* c: clear scsi fifo */ + +/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */ +/*52*/ u8 nc_stest4; + #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ + #define SMODE_HVD 0x40 /* High Voltage Differential */ + #define SMODE_SE 0x80 /* Single Ended */ + #define SMODE_LVD 0xc0 /* Low Voltage Differential */ + #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ + /* bits 0-5 rsvd for C1010 */ + +/*53*/ u8 nc_53_; +/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */ +/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */ + #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */ + #define PMJCTL 0x40 /* Phase Mismatch Jump Control */ + #define ENNDJ 0x20 /* Enable Non Data PM Jump */ + #define DISFC 0x10 /* Disable Auto FIFO Clear */ + #define DILS 0x02 /* Disable Internal Load/Store */ + #define DPR 0x01 /* Disable Pipe Req */ + +/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */ + #define ZMOD 0x80 /* High Impedance Mode */ + #define DIC 0x10 /* Disable Internal Cycles */ + #define DDAC 0x08 /* Disable Dual Address Cycle */ + #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */ + #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */ + #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */ + +/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */ +/*5a*/ u16 nc_5a_; + +/*5c*/ u8 nc_scr0; /* Working register B */ +/*5d*/ u8 nc_scr1; /* */ +/*5e*/ u8 nc_scr2; /* */ +/*5f*/ u8 nc_scr3; /* */ + +/*60*/ u8 nc_scrx[64]; /* Working register C-R */ +/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */ +/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */ +/*a8*/ u32 nc_sfs; /* Script Fetch Selector */ +/*ac*/ u32 nc_drs; /* DSA Relative Selector */ +/*b0*/ u32 nc_sbms; /* Static Block Move Selector */ +/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */ +/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */ +/*bc*/ u16 nc_scntl4; /* C1010 only */ + #define U3EN 0x80 /* Enable Ultra 3 */ + #define AIPEN 0x40 /* Allow check upper byte lanes */ + #define XCLKH_DT 0x08 /* Extra clock of data hold on DT + transfer edge */ + #define XCLKH_ST 0x04 /* Extra clock of data hold on ST + transfer edge */ + +/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */ +/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */ + +/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */ +/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */ +/*c8*/ u8 nc_rbc; /* Remaining Byte Count */ +/*c9*/ u8 nc_rbc1; /* */ +/*ca*/ u8 nc_rbc2; /* */ +/*cb*/ u8 nc_rbc3; /* */ + +/*cc*/ u8 nc_ua; /* Updated Address */ +/*cd*/ u8 nc_ua1; /* */ +/*ce*/ u8 nc_ua2; /* */ +/*cf*/ u8 nc_ua3; /* */ +/*d0*/ u32 nc_esa; /* Entry Storage Address */ +/*d4*/ u8 nc_ia; /* Instruction Address */ +/*d5*/ u8 nc_ia1; +/*d6*/ u8 nc_ia2; +/*d7*/ u8 nc_ia3; +/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */ +/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */ + + /* Following for C1010 only */ +/*e0*/ u16 nc_crcpad; /* CRC Value */ +/*e2*/ u8 nc_crccntl0; /* CRC control register */ + #define SNDCRC 0x10 /* Send CRC Request */ +/*e3*/ u8 nc_crccntl1; /* CRC control register */ +/*e4*/ u32 nc_crcdata; /* CRC data register */ +/*e8*/ u32 nc_e8_; /* rsvd */ +/*ec*/ u32 nc_ec_; /* rsvd */ +/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */ + +}; + +/*----------------------------------------------------------- +** +** Utility macros for the script. +** +**----------------------------------------------------------- +*/ + +#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r)) +#define REG(r) REGJ (nc_, r) + +typedef u32 ncrcmd; + +/*----------------------------------------------------------- +** +** SCSI phases +** +** DT phases illegal for ncr driver. +** +**----------------------------------------------------------- +*/ + +#define SCR_DATA_OUT 0x00000000 +#define SCR_DATA_IN 0x01000000 +#define SCR_COMMAND 0x02000000 +#define SCR_STATUS 0x03000000 +#define SCR_DT_DATA_OUT 0x04000000 +#define SCR_DT_DATA_IN 0x05000000 +#define SCR_MSG_OUT 0x06000000 +#define SCR_MSG_IN 0x07000000 + +#define SCR_ILG_OUT 0x04000000 +#define SCR_ILG_IN 0x05000000 + +/*----------------------------------------------------------- +** +** Data transfer via SCSI. +** +**----------------------------------------------------------- +** +** MOVE_ABS (LEN) +** <> +** +** MOVE_IND (LEN) +** <> +** +** MOVE_TBL +** <> +** +**----------------------------------------------------------- +*/ + +#define OPC_MOVE 0x08000000 + +#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l)) +#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l)) +#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE) + +#define SCR_CHMOV_ABS(l) ((0x00000000) | (l)) +#define SCR_CHMOV_IND(l) ((0x20000000) | (l)) +#define SCR_CHMOV_TBL (0x10000000) + +struct scr_tblmove { + u32 size; + u32 addr; +}; + +/*----------------------------------------------------------- +** +** Selection +** +**----------------------------------------------------------- +** +** SEL_ABS | SCR_ID (0..15) [ | REL_JMP] +** <> +** +** SEL_TBL | << dnad_offset>> [ | REL_JMP] +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_SEL_ABS 0x40000000 +#define SCR_SEL_ABS_ATN 0x41000000 +#define SCR_SEL_TBL 0x42000000 +#define SCR_SEL_TBL_ATN 0x43000000 + + +#ifdef SCSI_NCR_BIG_ENDIAN +struct scr_tblsel { + u8 sel_scntl3; + u8 sel_id; + u8 sel_sxfer; + u8 sel_scntl4; +}; +#else +struct scr_tblsel { + u8 sel_scntl4; + u8 sel_sxfer; + u8 sel_id; + u8 sel_scntl3; +}; +#endif + +#define SCR_JMP_REL 0x04000000 +#define SCR_ID(id) (((u32)(id)) << 16) + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** WAIT_DISC +** dummy: <> +** +** WAIT_RESEL +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_WAIT_DISC 0x48000000 +#define SCR_WAIT_RESEL 0x50000000 + +/*----------------------------------------------------------- +** +** Bit Set / Reset +** +**----------------------------------------------------------- +** +** SET (flags {|.. }) +** +** CLR (flags {|.. }) +** +**----------------------------------------------------------- +*/ + +#define SCR_SET(f) (0x58000000 | (f)) +#define SCR_CLR(f) (0x60000000 | (f)) + +#define SCR_CARRY 0x00000400 +#define SCR_TRG 0x00000200 +#define SCR_ACK 0x00000040 +#define SCR_ATN 0x00000008 + + + + +/*----------------------------------------------------------- +** +** Memory to memory move +** +**----------------------------------------------------------- +** +** COPY (bytecount) +** << source_address >> +** << destination_address >> +** +** SCR_COPY sets the NO FLUSH option by default. +** SCR_COPY_F does not set this option. +** +** For chips which do not support this option, +** ncr_copy_and_bind() will remove this bit. +**----------------------------------------------------------- +*/ + +#define SCR_NO_FLUSH 0x01000000 + +#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) +#define SCR_COPY_F(n) (0xc0000000 | (n)) + +/*----------------------------------------------------------- +** +** Register move and binary operations +** +**----------------------------------------------------------- +** +** SFBR_REG (reg, op, data) reg = SFBR op data +** << 0 >> +** +** REG_SFBR (reg, op, data) SFBR = reg op data +** << 0 >> +** +** REG_REG (reg, op, data) reg = reg op data +** << 0 >> +** +**----------------------------------------------------------- +** On 810A, 860, 825A, 875, 895 and 896 chips the content +** of SFBR register can be used as data (SCR_SFBR_DATA). +** The 896 has additionnal IO registers starting at +** offset 0x80. Bit 7 of register offset is stored in +** bit 7 of the SCRIPTS instruction first DWORD. +**----------------------------------------------------------- +*/ + +#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) + +#define SCR_SFBR_REG(reg,op,data) \ + (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + +#define SCR_REG_SFBR(reg,op,data) \ + (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + +#define SCR_REG_REG(reg,op,data) \ + (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + + +#define SCR_LOAD 0x00000000 +#define SCR_SHL 0x01000000 +#define SCR_OR 0x02000000 +#define SCR_XOR 0x03000000 +#define SCR_AND 0x04000000 +#define SCR_SHR 0x05000000 +#define SCR_ADD 0x06000000 +#define SCR_ADDC 0x07000000 + +#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */ + +/*----------------------------------------------------------- +** +** FROM_REG (reg) SFBR = reg +** << 0 >> +** +** TO_REG (reg) reg = SFBR +** << 0 >> +** +** LOAD_REG (reg, data) reg = +** << 0 >> +** +** LOAD_SFBR(data) SFBR = +** << 0 >> +** +**----------------------------------------------------------- +*/ + +#define SCR_FROM_REG(reg) \ + SCR_REG_SFBR(reg,SCR_OR,0) + +#define SCR_TO_REG(reg) \ + SCR_SFBR_REG(reg,SCR_OR,0) + +#define SCR_LOAD_REG(reg,data) \ + SCR_REG_REG(reg,SCR_LOAD,data) + +#define SCR_LOAD_SFBR(data) \ + (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) + +/*----------------------------------------------------------- +** +** LOAD from memory to register. +** STORE from register to memory. +** +** Only supported by 810A, 860, 825A, 875, 895 and 896. +** +**----------------------------------------------------------- +** +** LOAD_ABS (LEN) +** <> +** +** LOAD_REL (LEN) (DSA relative) +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul) +#define SCR_NO_FLUSH2 0x02000000 +#define SCR_DSA_REL2 0x10000000 + +#define SCR_LOAD_R(reg, how, n) \ + (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) + +#define SCR_STORE_R(reg, how, n) \ + (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) + +#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n) +#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n) +#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n) +#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n) + +#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n) +#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n) +#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n) +#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n) + + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** JUMP [ | IFTRUE/IFFALSE ( ... ) ] +** <
> +** +** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** CALL [ | IFTRUE/IFFALSE ( ... ) ] +** <
> +** +** CALLR [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** RETURN [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** INT [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** Conditions: +** WHEN (phase) +** IF (phase) +** CARRYSET +** DATA (data, mask) +** +**----------------------------------------------------------- +*/ + +#define SCR_NO_OP 0x80000000 +#define SCR_JUMP 0x80080000 +#define SCR_JUMP64 0x80480000 +#define SCR_JUMPR 0x80880000 +#define SCR_CALL 0x88080000 +#define SCR_CALLR 0x88880000 +#define SCR_RETURN 0x90080000 +#define SCR_INT 0x98080000 +#define SCR_INT_FLY 0x98180000 + +#define IFFALSE(arg) (0x00080000 | (arg)) +#define IFTRUE(arg) (0x00000000 | (arg)) + +#define WHEN(phase) (0x00030000 | (phase)) +#define IF(phase) (0x00020000 | (phase)) + +#define DATA(D) (0x00040000 | ((D) & 0xff)) +#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) + +#define CARRYSET (0x00200000) + +/*----------------------------------------------------------- +** +** SCSI constants. +** +**----------------------------------------------------------- +*/ + +/* +** Messages +*/ + +#define M_COMPLETE COMMAND_COMPLETE +#define M_EXTENDED EXTENDED_MESSAGE +#define M_SAVE_DP SAVE_POINTERS +#define M_RESTORE_DP RESTORE_POINTERS +#define M_DISCONNECT DISCONNECT +#define M_ID_ERROR INITIATOR_ERROR +#define M_ABORT ABORT_TASK_SET +#define M_REJECT MESSAGE_REJECT +#define M_NOOP NOP +#define M_PARITY MSG_PARITY_ERROR +#define M_LCOMPLETE LINKED_CMD_COMPLETE +#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE +#define M_RESET TARGET_RESET +#define M_ABORT_TAG ABORT_TASK +#define M_CLEAR_QUEUE CLEAR_TASK_SET +#define M_INIT_REC INITIATE_RECOVERY +#define M_REL_REC RELEASE_RECOVERY +#define M_TERMINATE (0x11) +#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG +#define M_HEAD_TAG HEAD_OF_QUEUE_TAG +#define M_ORDERED_TAG ORDERED_QUEUE_TAG +#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE +#define M_IDENTIFY (0x80) + +#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER +#define M_X_SYNC_REQ EXTENDED_SDTR +#define M_X_WIDE_REQ EXTENDED_WDTR +#define M_X_PPR_REQ EXTENDED_PPR + +/* +** Status +*/ + +#define S_GOOD (0x00) +#define S_CHECK_COND (0x02) +#define S_COND_MET (0x04) +#define S_BUSY (0x08) +#define S_INT (0x10) +#define S_INT_COND_MET (0x14) +#define S_CONFLICT (0x18) +#define S_TERMINATED (0x20) +#define S_QUEUE_FULL (0x28) +#define S_ILLEGAL (0xff) +#define S_SENSE (0x80) + +/* + * End of ncrreg from FreeBSD + */ /* Build a scatter/gather entry. diff --git a/drivers/scsi/sym53c8xx_comm.h b/drivers/scsi/sym53c8xx_comm.h deleted file mode 100644 index 20ae2b17df5..00000000000 --- a/drivers/scsi/sym53c8xx_comm.h +++ /dev/null @@ -1,792 +0,0 @@ -/****************************************************************************** -** High Performance device driver for the Symbios 53C896 controller. -** -** Copyright (C) 1998-2001 Gerard Roudier -** -** This driver also supports all the Symbios 53C8XX controller family, -** except 53C810 revisions < 16, 53C825 revisions < 16 and all -** revisions of 53C815 controllers. -** -** This driver is based on the Linux port of the FreeBSD ncr driver. -** -** Copyright (C) 1994 Wolfgang Stanglmeier -** -**----------------------------------------------------------------------------- -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** This program is distributed in the hope that it will be useful, -** but WITHOUT ANY WARRANTY; without even the implied warranty of -** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -** GNU General Public License for more details. -** -** You should have received a copy of the GNU General Public License -** along with this program; if not, write to the Free Software -** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -**----------------------------------------------------------------------------- -** -** The Linux port of the FreeBSD ncr driver has been achieved in -** november 1995 by: -** -** Gerard Roudier -** -** Being given that this driver originates from the FreeBSD version, and -** in order to keep synergy on both, any suggested enhancements and corrections -** received on Linux are automatically a potential candidate for the FreeBSD -** version. -** -** The original driver has been written for 386bsd and FreeBSD by -** Wolfgang Stanglmeier -** Stefan Esser -** -**----------------------------------------------------------------------------- -** -** Major contributions: -** -------------------- -** -** NVRAM detection and reading. -** Copyright (C) 1997 Richard Waltham -** -******************************************************************************* -*/ - -/*========================================================== -** -** Debugging tags -** -**========================================================== -*/ - -#define DEBUG_ALLOC (0x0001) -#define DEBUG_PHASE (0x0002) -#define DEBUG_QUEUE (0x0008) -#define DEBUG_RESULT (0x0010) -#define DEBUG_POINTER (0x0020) -#define DEBUG_SCRIPT (0x0040) -#define DEBUG_TINY (0x0080) -#define DEBUG_TIMING (0x0100) -#define DEBUG_NEGO (0x0200) -#define DEBUG_TAGS (0x0400) -#define DEBUG_SCATTER (0x0800) -#define DEBUG_IC (0x1000) - -/* -** Enable/Disable debug messages. -** Can be changed at runtime too. -*/ - -#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT -static int ncr_debug = SCSI_NCR_DEBUG_FLAGS; - #define DEBUG_FLAGS ncr_debug -#else - #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS -#endif - -static inline struct list_head *ncr_list_pop(struct list_head *head) -{ - if (!list_empty(head)) { - struct list_head *elem = head->next; - - list_del(elem); - return elem; - } - - return NULL; -} - -#ifdef __sparc__ -#include -#endif - -/*========================================================== -** -** Simple power of two buddy-like allocator. -** -** This simple code is not intended to be fast, but to -** provide power of 2 aligned memory allocations. -** Since the SCRIPTS processor only supplies 8 bit -** arithmetic, this allocator allows simple and fast -** address calculations from the SCRIPTS code. -** In addition, cache line alignment is guaranteed for -** power of 2 cache line size. -** Enhanced in linux-2.3.44 to provide a memory pool -** per pcidev to support dynamic dma mapping. (I would -** have preferred a real bus astraction, btw). -** -**========================================================== -*/ - -#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ -#if PAGE_SIZE >= 8192 -#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ -#else -#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */ -#endif -#define MEMO_FREE_UNUSED /* Free unused pages immediately */ -#define MEMO_WARN 1 -#define MEMO_GFP_FLAGS GFP_ATOMIC -#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) -#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) -#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) - -typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ -typedef struct device *m_bush_t; /* Something that addresses DMAable */ - -typedef struct m_link { /* Link between free memory chunks */ - struct m_link *next; -} m_link_s; - -typedef struct m_vtob { /* Virtual to Bus address translation */ - struct m_vtob *next; - m_addr_t vaddr; - m_addr_t baddr; -} m_vtob_s; -#define VTOB_HASH_SHIFT 5 -#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) -#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) -#define VTOB_HASH_CODE(m) \ - ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) - -typedef struct m_pool { /* Memory pool of a given kind */ - m_bush_t bush; - m_addr_t (*getp)(struct m_pool *); - void (*freep)(struct m_pool *, m_addr_t); - int nump; - m_vtob_s *(vtob[VTOB_HASH_SIZE]); - struct m_pool *next; - struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1]; -} m_pool_s; - -static void *___m_alloc(m_pool_s *mp, int size) -{ - int i = 0; - int s = (1 << MEMO_SHIFT); - int j; - m_addr_t a; - m_link_s *h = mp->h; - - if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) - return NULL; - - while (size > s) { - s <<= 1; - ++i; - } - - j = i; - while (!h[j].next) { - if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { - h[j].next = (m_link_s *)mp->getp(mp); - if (h[j].next) - h[j].next->next = NULL; - break; - } - ++j; - s <<= 1; - } - a = (m_addr_t) h[j].next; - if (a) { - h[j].next = h[j].next->next; - while (j > i) { - j -= 1; - s >>= 1; - h[j].next = (m_link_s *) (a+s); - h[j].next->next = NULL; - } - } -#ifdef DEBUG - printk("___m_alloc(%d) = %p\n", size, (void *) a); -#endif - return (void *) a; -} - -static void ___m_free(m_pool_s *mp, void *ptr, int size) -{ - int i = 0; - int s = (1 << MEMO_SHIFT); - m_link_s *q; - m_addr_t a, b; - m_link_s *h = mp->h; - -#ifdef DEBUG - printk("___m_free(%p, %d)\n", ptr, size); -#endif - - if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) - return; - - while (size > s) { - s <<= 1; - ++i; - } - - a = (m_addr_t) ptr; - - while (1) { -#ifdef MEMO_FREE_UNUSED - if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { - mp->freep(mp, a); - break; - } -#endif - b = a ^ s; - q = &h[i]; - while (q->next && q->next != (m_link_s *) b) { - q = q->next; - } - if (!q->next) { - ((m_link_s *) a)->next = h[i].next; - h[i].next = (m_link_s *) a; - break; - } - q->next = q->next->next; - a = a & b; - s <<= 1; - ++i; - } -} - -static DEFINE_SPINLOCK(ncr53c8xx_lock); - -static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags) -{ - void *p; - - p = ___m_alloc(mp, size); - - if (DEBUG_FLAGS & DEBUG_ALLOC) - printk ("new %-10s[%4d] @%p.\n", name, size, p); - - if (p) - memset(p, 0, size); - else if (uflags & MEMO_WARN) - printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size); - - return p; -} - -#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN) - -static void __m_free(m_pool_s *mp, void *ptr, int size, char *name) -{ - if (DEBUG_FLAGS & DEBUG_ALLOC) - printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr); - - ___m_free(mp, ptr, size); - -} - -/* - * With pci bus iommu support, we use a default pool of unmapped memory - * for memory we donnot need to DMA from/to and one pool per pcidev for - * memory accessed by the PCI chip. `mp0' is the default not DMAable pool. - */ - -static m_addr_t ___mp0_getp(m_pool_s *mp) -{ - m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER); - if (m) - ++mp->nump; - return m; -} - -static void ___mp0_freep(m_pool_s *mp, m_addr_t m) -{ - free_pages(m, MEMO_PAGE_ORDER); - --mp->nump; -} - -static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep}; - -/* - * DMAable pools. - */ - -/* - * With pci bus iommu support, we maintain one pool per pcidev and a - * hashed reverse table for virtual to bus physical address translations. - */ -static m_addr_t ___dma_getp(m_pool_s *mp) -{ - m_addr_t vp; - m_vtob_s *vbp; - - vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB"); - if (vbp) { - dma_addr_t daddr; - vp = (m_addr_t) dma_alloc_coherent(mp->bush, - PAGE_SIZE<vaddr = vp; - vbp->baddr = daddr; - vbp->next = mp->vtob[hc]; - mp->vtob[hc] = vbp; - ++mp->nump; - return vp; - } - } - if (vbp) - __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); - return 0; -} - -static void ___dma_freep(m_pool_s *mp, m_addr_t m) -{ - m_vtob_s **vbpp, *vbp; - int hc = VTOB_HASH_CODE(m); - - vbpp = &mp->vtob[hc]; - while (*vbpp && (*vbpp)->vaddr != m) - vbpp = &(*vbpp)->next; - if (*vbpp) { - vbp = *vbpp; - *vbpp = (*vbpp)->next; - dma_free_coherent(mp->bush, PAGE_SIZE<vaddr, (dma_addr_t)vbp->baddr); - __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); - --mp->nump; - } -} - -static inline m_pool_s *___get_dma_pool(m_bush_t bush) -{ - m_pool_s *mp; - for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next); - return mp; -} - -static m_pool_s *___cre_dma_pool(m_bush_t bush) -{ - m_pool_s *mp; - mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL"); - if (mp) { - memset(mp, 0, sizeof(*mp)); - mp->bush = bush; - mp->getp = ___dma_getp; - mp->freep = ___dma_freep; - mp->next = mp0.next; - mp0.next = mp; - } - return mp; -} - -static void ___del_dma_pool(m_pool_s *p) -{ - struct m_pool **pp = &mp0.next; - - while (*pp && *pp != p) - pp = &(*pp)->next; - if (*pp) { - *pp = (*pp)->next; - __m_free(&mp0, p, sizeof(*p), "MPOOL"); - } -} - -static void *__m_calloc_dma(m_bush_t bush, int size, char *name) -{ - u_long flags; - struct m_pool *mp; - void *m = NULL; - - spin_lock_irqsave(&ncr53c8xx_lock, flags); - mp = ___get_dma_pool(bush); - if (!mp) - mp = ___cre_dma_pool(bush); - if (mp) - m = __m_calloc(mp, size, name); - if (mp && !mp->nump) - ___del_dma_pool(mp); - spin_unlock_irqrestore(&ncr53c8xx_lock, flags); - - return m; -} - -static void __m_free_dma(m_bush_t bush, void *m, int size, char *name) -{ - u_long flags; - struct m_pool *mp; - - spin_lock_irqsave(&ncr53c8xx_lock, flags); - mp = ___get_dma_pool(bush); - if (mp) - __m_free(mp, m, size, name); - if (mp && !mp->nump) - ___del_dma_pool(mp); - spin_unlock_irqrestore(&ncr53c8xx_lock, flags); -} - -static m_addr_t __vtobus(m_bush_t bush, void *m) -{ - u_long flags; - m_pool_s *mp; - int hc = VTOB_HASH_CODE(m); - m_vtob_s *vp = NULL; - m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; - - spin_lock_irqsave(&ncr53c8xx_lock, flags); - mp = ___get_dma_pool(bush); - if (mp) { - vp = mp->vtob[hc]; - while (vp && (m_addr_t) vp->vaddr != a) - vp = vp->next; - } - spin_unlock_irqrestore(&ncr53c8xx_lock, flags); - return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; -} - -#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n) -#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n) -#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n) -#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n) -#define _vtobus(np, p) __vtobus(np->dev, p) -#define vtobus(p) _vtobus(np, p) - -/* - * Deal with DMA mapping/unmapping. - */ - -/* To keep track of the dma mapping (sg/single) that has been set */ -#define __data_mapped SCp.phase -#define __data_mapping SCp.have_data_in - -static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd) -{ - switch(cmd->__data_mapped) { - case 2: - dma_unmap_sg(dev, cmd->buffer, cmd->use_sg, - cmd->sc_data_direction); - break; - case 1: - dma_unmap_single(dev, cmd->__data_mapping, - cmd->request_bufflen, - cmd->sc_data_direction); - break; - } - cmd->__data_mapped = 0; -} - -static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd) -{ - dma_addr_t mapping; - - if (cmd->request_bufflen == 0) - return 0; - - mapping = dma_map_single(dev, cmd->request_buffer, - cmd->request_bufflen, - cmd->sc_data_direction); - cmd->__data_mapped = 1; - cmd->__data_mapping = mapping; - - return mapping; -} - -static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd) -{ - int use_sg; - - if (cmd->use_sg == 0) - return 0; - - use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg, - cmd->sc_data_direction); - cmd->__data_mapped = 2; - cmd->__data_mapping = use_sg; - - return use_sg; -} - -#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd) -#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd) -#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd) - -/*========================================================== -** -** Driver setup. -** -** This structure is initialized from linux config -** options. It can be overridden at boot-up by the boot -** command line. -** -**========================================================== -*/ -static struct ncr_driver_setup - driver_setup = SCSI_NCR_DRIVER_SETUP; - -#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT -static struct ncr_driver_setup - driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP; -#endif - -#define initverbose (driver_setup.verbose) -#define bootverbose (np->verbose) - - -/*=================================================================== -** -** Driver setup from the boot command line -** -**=================================================================== -*/ - -#ifdef MODULE -#define ARG_SEP ' ' -#else -#define ARG_SEP ',' -#endif - -#define OPT_TAGS 1 -#define OPT_MASTER_PARITY 2 -#define OPT_SCSI_PARITY 3 -#define OPT_DISCONNECTION 4 -#define OPT_SPECIAL_FEATURES 5 -#define OPT_UNUSED_1 6 -#define OPT_FORCE_SYNC_NEGO 7 -#define OPT_REVERSE_PROBE 8 -#define OPT_DEFAULT_SYNC 9 -#define OPT_VERBOSE 10 -#define OPT_DEBUG 11 -#define OPT_BURST_MAX 12 -#define OPT_LED_PIN 13 -#define OPT_MAX_WIDE 14 -#define OPT_SETTLE_DELAY 15 -#define OPT_DIFF_SUPPORT 16 -#define OPT_IRQM 17 -#define OPT_PCI_FIX_UP 18 -#define OPT_BUS_CHECK 19 -#define OPT_OPTIMIZE 20 -#define OPT_RECOVERY 21 -#define OPT_SAFE_SETUP 22 -#define OPT_USE_NVRAM 23 -#define OPT_EXCLUDE 24 -#define OPT_HOST_ID 25 - -#ifdef SCSI_NCR_IARB_SUPPORT -#define OPT_IARB 26 -#endif - -static char setup_token[] __initdata = - "tags:" "mpar:" - "spar:" "disc:" - "specf:" "ultra:" - "fsn:" "revprob:" - "sync:" "verb:" - "debug:" "burst:" - "led:" "wide:" - "settle:" "diff:" - "irqm:" "pcifix:" - "buschk:" "optim:" - "recovery:" - "safe:" "nvram:" - "excl:" "hostid:" -#ifdef SCSI_NCR_IARB_SUPPORT - "iarb:" -#endif - ; /* DONNOT REMOVE THIS ';' */ - -#ifdef MODULE -#define ARG_SEP ' ' -#else -#define ARG_SEP ',' -#endif - -static int __init get_setup_token(char *p) -{ - char *cur = setup_token; - char *pc; - int i = 0; - - while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { - ++pc; - ++i; - if (!strncmp(p, cur, pc - cur)) - return i; - cur = pc; - } - return 0; -} - - -static int __init sym53c8xx__setup(char *str) -{ -#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT - char *cur = str; - char *pc, *pv; - int i, val, c; - int xi = 0; - - while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { - char *pe; - - val = 0; - pv = pc; - c = *++pv; - - if (c == 'n') - val = 0; - else if (c == 'y') - val = 1; - else - val = (int) simple_strtoul(pv, &pe, 0); - - switch (get_setup_token(cur)) { - case OPT_TAGS: - driver_setup.default_tags = val; - if (pe && *pe == '/') { - i = 0; - while (*pe && *pe != ARG_SEP && - i < sizeof(driver_setup.tag_ctrl)-1) { - driver_setup.tag_ctrl[i++] = *pe++; - } - driver_setup.tag_ctrl[i] = '\0'; - } - break; - case OPT_MASTER_PARITY: - driver_setup.master_parity = val; - break; - case OPT_SCSI_PARITY: - driver_setup.scsi_parity = val; - break; - case OPT_DISCONNECTION: - driver_setup.disconnection = val; - break; - case OPT_SPECIAL_FEATURES: - driver_setup.special_features = val; - break; - case OPT_FORCE_SYNC_NEGO: - driver_setup.force_sync_nego = val; - break; - case OPT_REVERSE_PROBE: - driver_setup.reverse_probe = val; - break; - case OPT_DEFAULT_SYNC: - driver_setup.default_sync = val; - break; - case OPT_VERBOSE: - driver_setup.verbose = val; - break; - case OPT_DEBUG: - driver_setup.debug = val; - break; - case OPT_BURST_MAX: - driver_setup.burst_max = val; - break; - case OPT_LED_PIN: - driver_setup.led_pin = val; - break; - case OPT_MAX_WIDE: - driver_setup.max_wide = val? 1:0; - break; - case OPT_SETTLE_DELAY: - driver_setup.settle_delay = val; - break; - case OPT_DIFF_SUPPORT: - driver_setup.diff_support = val; - break; - case OPT_IRQM: - driver_setup.irqm = val; - break; - case OPT_PCI_FIX_UP: - driver_setup.pci_fix_up = val; - break; - case OPT_BUS_CHECK: - driver_setup.bus_check = val; - break; - case OPT_OPTIMIZE: - driver_setup.optimize = val; - break; - case OPT_RECOVERY: - driver_setup.recovery = val; - break; - case OPT_USE_NVRAM: - driver_setup.use_nvram = val; - break; - case OPT_SAFE_SETUP: - memcpy(&driver_setup, &driver_safe_setup, - sizeof(driver_setup)); - break; - case OPT_EXCLUDE: - if (xi < SCSI_NCR_MAX_EXCLUDES) - driver_setup.excludes[xi++] = val; - break; - case OPT_HOST_ID: - driver_setup.host_id = val; - break; -#ifdef SCSI_NCR_IARB_SUPPORT - case OPT_IARB: - driver_setup.iarb = val; - break; -#endif - default: - printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur); - break; - } - - if ((cur = strchr(cur, ARG_SEP)) != NULL) - ++cur; - } -#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */ - return 1; -} - -/*=================================================================== -** -** Get device queue depth from boot command line. -** -**=================================================================== -*/ -#define DEF_DEPTH (driver_setup.default_tags) -#define ALL_TARGETS -2 -#define NO_TARGET -1 -#define ALL_LUNS -2 -#define NO_LUN -1 - -static int device_queue_depth(int unit, int target, int lun) -{ - int c, h, t, u, v; - char *p = driver_setup.tag_ctrl; - char *ep; - - h = -1; - t = NO_TARGET; - u = NO_LUN; - while ((c = *p++) != 0) { - v = simple_strtoul(p, &ep, 0); - switch(c) { - case '/': - ++h; - t = ALL_TARGETS; - u = ALL_LUNS; - break; - case 't': - if (t != target) - t = (target == v) ? v : NO_TARGET; - u = ALL_LUNS; - break; - case 'u': - if (u != lun) - u = (lun == v) ? v : NO_LUN; - break; - case 'q': - if (h == unit && - (t == ALL_TARGETS || t == target) && - (u == ALL_LUNS || u == lun)) - return v; - break; - case '-': - t = ALL_TARGETS; - u = ALL_LUNS; - break; - default: - break; - } - p = ep; - } - return DEF_DEPTH; -} diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h deleted file mode 100644 index 139cd0e12e6..00000000000 --- a/drivers/scsi/sym53c8xx_defs.h +++ /dev/null @@ -1,1320 +0,0 @@ -/****************************************************************************** -** High Performance device driver for the Symbios 53C896 controller. -** -** Copyright (C) 1998-2001 Gerard Roudier -** -** This driver also supports all the Symbios 53C8XX controller family, -** except 53C810 revisions < 16, 53C825 revisions < 16 and all -** revisions of 53C815 controllers. -** -** This driver is based on the Linux port of the FreeBSD ncr driver. -** -** Copyright (C) 1994 Wolfgang Stanglmeier -** -**----------------------------------------------------------------------------- -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** This program is distributed in the hope that it will be useful, -** but WITHOUT ANY WARRANTY; without even the implied warranty of -** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -** GNU General Public License for more details. -** -** You should have received a copy of the GNU General Public License -** along with this program; if not, write to the Free Software -** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -** -**----------------------------------------------------------------------------- -** -** The Linux port of the FreeBSD ncr driver has been achieved in -** november 1995 by: -** -** Gerard Roudier -** -** Being given that this driver originates from the FreeBSD version, and -** in order to keep synergy on both, any suggested enhancements and corrections -** received on Linux are automatically a potential candidate for the FreeBSD -** version. -** -** The original driver has been written for 386bsd and FreeBSD by -** Wolfgang Stanglmeier -** Stefan Esser -** -**----------------------------------------------------------------------------- -** -** Major contributions: -** -------------------- -** -** NVRAM detection and reading. -** Copyright (C) 1997 Richard Waltham -** -** Added support for MIPS big endian systems. -** Carsten Langgaard, carstenl@mips.com -** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -** -** Added support for HP PARISC big endian systems. -** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -** -******************************************************************************* -*/ - -#ifndef SYM53C8XX_DEFS_H -#define SYM53C8XX_DEFS_H - -#include - -/* -** If you want a driver as small as possible, donnot define the -** following options. -*/ -#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT -#define SCSI_NCR_DEBUG_INFO_SUPPORT - -/* -** To disable integrity checking, do not define the -** following option. -*/ -#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK -# define SCSI_NCR_ENABLE_INTEGRITY_CHECK -#endif - -/* --------------------------------------------------------------------- -** Take into account kernel configured parameters. -** Most of these options can be overridden at startup by a command line. -** --------------------------------------------------------------------- -*/ - -/* - * For Ultra2 and Ultra3 SCSI support option, use special features. - * - * Value (default) means: - * bit 0 : all features enabled, except: - * bit 1 : PCI Write And Invalidate. - * bit 2 : Data Phase Mismatch handling from SCRIPTS. - * - * Use boot options ncr53c8xx=specf:1 if you want all chip features to be - * enabled by the driver. - */ -#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3) - -#define SCSI_NCR_MAX_SYNC (80) - -/* - * Allow tags from 2 to 256, default 8 - */ -#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS -#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2 -#define SCSI_NCR_MAX_TAGS (2) -#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256 -#define SCSI_NCR_MAX_TAGS (256) -#else -#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS -#endif -#else -#define SCSI_NCR_MAX_TAGS (8) -#endif - -/* - * Allow tagged command queuing support if configured with default number - * of tags set to max (see above). - */ -#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS -#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS -#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE -#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS -#else -#define SCSI_NCR_SETUP_DEFAULT_TAGS (0) -#endif - -/* - * Immediate arbitration - */ -#if defined(CONFIG_SCSI_NCR53C8XX_IARB) -#define SCSI_NCR_IARB_SUPPORT -#endif - -/* - * Sync transfer frequency at startup. - * Allow from 5Mhz to 80Mhz default 20 Mhz. - */ -#ifndef CONFIG_SCSI_NCR53C8XX_SYNC -#define CONFIG_SCSI_NCR53C8XX_SYNC (20) -#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC -#undef CONFIG_SCSI_NCR53C8XX_SYNC -#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC -#endif - -#if CONFIG_SCSI_NCR53C8XX_SYNC == 0 -#define SCSI_NCR_SETUP_DEFAULT_SYNC (255) -#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5 -#define SCSI_NCR_SETUP_DEFAULT_SYNC (50) -#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20 -#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC)) -#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33 -#define SCSI_NCR_SETUP_DEFAULT_SYNC (11) -#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40 -#define SCSI_NCR_SETUP_DEFAULT_SYNC (10) -#else -#define SCSI_NCR_SETUP_DEFAULT_SYNC (9) -#endif - -/* - * Disallow disconnections at boot-up - */ -#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT -#define SCSI_NCR_SETUP_DISCONNECTION (0) -#else -#define SCSI_NCR_SETUP_DISCONNECTION (1) -#endif - -/* - * Force synchronous negotiation for all targets - */ -#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO -#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1) -#else -#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0) -#endif - -/* - * Disable master parity checking (flawed hardwares need that) - */ -#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK -#define SCSI_NCR_SETUP_MASTER_PARITY (0) -#else -#define SCSI_NCR_SETUP_MASTER_PARITY (1) -#endif - -/* - * Disable scsi parity checking (flawed devices may need that) - */ -#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK -#define SCSI_NCR_SETUP_SCSI_PARITY (0) -#else -#define SCSI_NCR_SETUP_SCSI_PARITY (1) -#endif - -/* - * Settle time after reset at boot-up - */ -#define SCSI_NCR_SETUP_SETTLE_TIME (2) - -/* -** Bridge quirks work-around option defaulted to 1. -*/ -#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT -#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1 -#endif - -/* -** Work-around common bridge misbehaviour. -** -** - Do not flush posted writes in the opposite -** direction on read. -** - May reorder DMA writes to memory. -** -** This option should not affect performances -** significantly, so it is the default. -*/ -#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1 -#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM -#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES -#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS - -/* -** Same as option 1, but also deal with -** misconfigured interrupts. -** -** - Edge triggerred instead of level sensitive. -** - No interrupt line connected. -** - IRQ number misconfigured. -** -** If no interrupt is delivered, the driver will -** catch the interrupt conditions 10 times per -** second. No need to say that this option is -** not recommended. -*/ -#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2 -#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM -#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES -#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS -#define SCSI_NCR_PCIQ_BROKEN_INTR - -/* -** Some bridge designers decided to flush -** everything prior to deliver the interrupt. -** This option tries to deal with such a -** behaviour. -*/ -#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3 -#define SCSI_NCR_PCIQ_SYNC_ON_INTR -#endif - -/* -** Other parameters not configurable with "make config" -** Avoid to change these constants, unless you know what you are doing. -*/ - -#define SCSI_NCR_ALWAYS_SIMPLE_TAG -#define SCSI_NCR_MAX_SCATTER (127) -#define SCSI_NCR_MAX_TARGET (16) - -/* -** Compute some desirable value for CAN_QUEUE -** and CMD_PER_LUN. -** The driver will use lower values if these -** ones appear to be too large. -*/ -#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET) -#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS) - -#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER) -#define SCSI_NCR_TIMER_INTERVAL (HZ) - -#if 1 /* defined CONFIG_SCSI_MULTI_LUN */ -#define SCSI_NCR_MAX_LUN (16) -#else -#define SCSI_NCR_MAX_LUN (1) -#endif - -/* - * IO functions definition for big/little endian CPU support. - * For now, the NCR is only supported in little endian addressing mode, - */ - -#ifdef __BIG_ENDIAN - -#define inw_l2b inw -#define inl_l2b inl -#define outw_b2l outw -#define outl_b2l outl - -#define readb_raw readb -#define writeb_raw writeb - -#if defined(SCSI_NCR_BIG_ENDIAN) -#define readw_l2b __raw_readw -#define readl_l2b __raw_readl -#define writew_b2l __raw_writew -#define writel_b2l __raw_writel -#define readw_raw __raw_readw -#define readl_raw __raw_readl -#define writew_raw __raw_writew -#define writel_raw __raw_writel -#else /* Other big-endian */ -#define readw_l2b readw -#define readl_l2b readl -#define writew_b2l writew -#define writel_b2l writel -#define readw_raw readw -#define readl_raw readl -#define writew_raw writew -#define writel_raw writel -#endif - -#else /* little endian */ - -#define inw_raw inw -#define inl_raw inl -#define outw_raw outw -#define outl_raw outl - -#define readb_raw readb -#define readw_raw readw -#define readl_raw readl -#define writeb_raw writeb -#define writew_raw writew -#define writel_raw writel - -#endif - -#if !defined(__hppa__) && !defined(__mips__) -#ifdef SCSI_NCR_BIG_ENDIAN -#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported" -#endif -#endif - -#define MEMORY_BARRIER() mb() - - -/* - * If the NCR uses big endian addressing mode over the - * PCI, actual io register addresses for byte and word - * accesses must be changed according to lane routing. - * Btw, ncr_offb() and ncr_offw() macros only apply to - * constants and so donnot generate bloated code. - */ - -#if defined(SCSI_NCR_BIG_ENDIAN) - -#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3)) -#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2)) - -#else - -#define ncr_offb(o) (o) -#define ncr_offw(o) (o) - -#endif - -/* - * If the CPU and the NCR use same endian-ness addressing, - * no byte reordering is needed for script patching. - * Macro cpu_to_scr() is to be used for script patching. - * Macro scr_to_cpu() is to be used for getting a DWORD - * from the script. - */ - -#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) - -#define cpu_to_scr(dw) cpu_to_le32(dw) -#define scr_to_cpu(dw) le32_to_cpu(dw) - -#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) - -#define cpu_to_scr(dw) cpu_to_be32(dw) -#define scr_to_cpu(dw) be32_to_cpu(dw) - -#else - -#define cpu_to_scr(dw) (dw) -#define scr_to_cpu(dw) (dw) - -#endif - -/* - * Access to the controller chip. - * - * If the CPU and the NCR use same endian-ness addressing, - * no byte reordering is needed for accessing chip io - * registers. Functions suffixed by '_raw' are assumed - * to access the chip over the PCI without doing byte - * reordering. Functions suffixed by '_l2b' are - * assumed to perform little-endian to big-endian byte - * reordering, those suffixed by '_b2l' blah, blah, - * blah, ... - */ - -/* - * MEMORY mapped IO input / output - */ - -#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o)) -#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o)) - -#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN) - -#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o)) -#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o)) - -#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o)) -#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o)) - -#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN) - -#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o)) -#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o)) - -#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o)) -#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o)) - -#else - -#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS -/* Only 8 or 32 bit transfers allowed */ -#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1)) -#else -#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o)) -#endif -#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o)) - -#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS -/* Only 8 or 32 bit transfers allowed */ -#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0) -#else -#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o)) -#endif -#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o)) - -#endif - -#define INB(r) INB_OFF (offsetof(struct ncr_reg,r)) -#define INW(r) INW_OFF (offsetof(struct ncr_reg,r)) -#define INL(r) INL_OFF (offsetof(struct ncr_reg,r)) - -#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val)) -#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val)) -#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val)) - -/* - * Set bit field ON, OFF - */ - -#define OUTONB(r, m) OUTB(r, INB(r) | (m)) -#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m)) -#define OUTONW(r, m) OUTW(r, INW(r) | (m)) -#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m)) -#define OUTONL(r, m) OUTL(r, INL(r) | (m)) -#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m)) - -/* - * We normally want the chip to have a consistent view - * of driver internal data structures when we restart it. - * Thus these macros. - */ -#define OUTL_DSP(v) \ - do { \ - MEMORY_BARRIER(); \ - OUTL (nc_dsp, (v)); \ - } while (0) - -#define OUTONB_STD() \ - do { \ - MEMORY_BARRIER(); \ - OUTONB (nc_dcntl, (STD|NOCOM)); \ - } while (0) - - -/* -** NCR53C8XX devices features table. -*/ -struct ncr_chip { - unsigned short revision_id; - unsigned char burst_max; /* log-base-2 of max burst */ - unsigned char offset_max; - unsigned char nr_divisor; - unsigned int features; -#define FE_LED0 (1<<0) -#define FE_WIDE (1<<1) /* Wide data transfers */ -#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */ -#define FE_DBLR (1<<4) /* Clock doubler present */ -#define FE_QUAD (1<<5) /* Clock quadrupler present */ -#define FE_ERL (1<<6) /* Enable read line */ -#define FE_CLSE (1<<7) /* Cache line size enable */ -#define FE_WRIE (1<<8) /* Write & Invalidate enable */ -#define FE_ERMP (1<<9) /* Enable read multiple */ -#define FE_BOF (1<<10) /* Burst opcode fetch */ -#define FE_DFS (1<<11) /* DMA fifo size */ -#define FE_PFEN (1<<12) /* Prefetch enable */ -#define FE_LDSTR (1<<13) /* Load/Store supported */ -#define FE_RAM (1<<14) /* On chip RAM present */ -#define FE_VARCLK (1<<15) /* SCSI clock may vary */ -#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */ -#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */ -#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */ -#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */ -#define FE_LEDC (1<<20) /* Hardware control of LED */ -#define FE_DIFF (1<<21) /* Support Differential SCSI */ -#define FE_66MHZ (1<<23) /* 66MHz PCI Support */ -#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */ -#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */ -#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */ -#define FE_EHP (1<<27) /* 720: Even host parity */ -#define FE_MUX (1<<28) /* 720: Multiplexed bus */ -#define FE_EA (1<<29) /* 720: Enable Ack */ - -#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP) -#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80) -#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM) -}; - - -/* -** Driver setup structure. -** -** This structure is initialized from linux config options. -** It can be overridden at boot-up by the boot command line. -*/ -#define SCSI_NCR_MAX_EXCLUDES 8 -struct ncr_driver_setup { - u8 master_parity; - u8 scsi_parity; - u8 disconnection; - u8 special_features; - u8 force_sync_nego; - u8 reverse_probe; - u8 pci_fix_up; - u8 use_nvram; - u8 verbose; - u8 default_tags; - u16 default_sync; - u16 debug; - u8 burst_max; - u8 led_pin; - u8 max_wide; - u8 settle_delay; - u8 diff_support; - u8 irqm; - u8 bus_check; - u8 optimize; - u8 recovery; - u8 host_id; - u16 iarb; - u32 excludes[SCSI_NCR_MAX_EXCLUDES]; - char tag_ctrl[100]; -}; - -/* -** Initial setup. -** Can be overriden at startup by a command line. -*/ -#define SCSI_NCR_DRIVER_SETUP \ -{ \ - SCSI_NCR_SETUP_MASTER_PARITY, \ - SCSI_NCR_SETUP_SCSI_PARITY, \ - SCSI_NCR_SETUP_DISCONNECTION, \ - SCSI_NCR_SETUP_SPECIAL_FEATURES, \ - SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \ - 0, \ - 0, \ - 1, \ - 0, \ - SCSI_NCR_SETUP_DEFAULT_TAGS, \ - SCSI_NCR_SETUP_DEFAULT_SYNC, \ - 0x00, \ - 7, \ - 0, \ - 1, \ - SCSI_NCR_SETUP_SETTLE_TIME, \ - 0, \ - 0, \ - 1, \ - 0, \ - 0, \ - 255, \ - 0x00 \ -} - -/* -** Boot fail safe setup. -** Override initial setup from boot command line: -** ncr53c8xx=safe:y -*/ -#define SCSI_NCR_DRIVER_SAFE_SETUP \ -{ \ - 0, \ - 1, \ - 0, \ - 0, \ - 0, \ - 0, \ - 0, \ - 1, \ - 2, \ - 0, \ - 255, \ - 0x00, \ - 255, \ - 0, \ - 0, \ - 10, \ - 1, \ - 1, \ - 1, \ - 0, \ - 0, \ - 255 \ -} - -/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/ - -/*----------------------------------------------------------------- -** -** The ncr 53c810 register structure. -** -**----------------------------------------------------------------- -*/ - -struct ncr_reg { -/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */ - -/*01*/ u8 nc_scntl1; /* no reset */ - #define ISCON 0x10 /* connected to scsi */ - #define CRST 0x08 /* force reset */ - #define IARB 0x02 /* immediate arbitration */ - -/*02*/ u8 nc_scntl2; /* no disconnect expected */ - #define SDU 0x80 /* cmd: disconnect will raise error */ - #define CHM 0x40 /* sta: chained mode */ - #define WSS 0x08 /* sta: wide scsi send [W]*/ - #define WSR 0x01 /* sta: wide scsi received [W]*/ - -/*03*/ u8 nc_scntl3; /* cnf system clock dependent */ - #define EWS 0x08 /* cmd: enable wide scsi [W]*/ - #define ULTRA 0x80 /* cmd: ULTRA enable */ - /* bits 0-2, 7 rsvd for C1010 */ - -/*04*/ u8 nc_scid; /* cnf host adapter scsi address */ - #define RRE 0x40 /* r/w:e enable response to resel. */ - #define SRE 0x20 /* r/w:e enable response to select */ - -/*05*/ u8 nc_sxfer; /* ### Sync speed and count */ - /* bits 6-7 rsvd for C1010 */ - -/*06*/ u8 nc_sdid; /* ### Destination-ID */ - -/*07*/ u8 nc_gpreg; /* ??? IO-Pins */ - -/*08*/ u8 nc_sfbr; /* ### First byte in phase */ - -/*09*/ u8 nc_socl; - #define CREQ 0x80 /* r/w: SCSI-REQ */ - #define CACK 0x40 /* r/w: SCSI-ACK */ - #define CBSY 0x20 /* r/w: SCSI-BSY */ - #define CSEL 0x10 /* r/w: SCSI-SEL */ - #define CATN 0x08 /* r/w: SCSI-ATN */ - #define CMSG 0x04 /* r/w: SCSI-MSG */ - #define CC_D 0x02 /* r/w: SCSI-C_D */ - #define CI_O 0x01 /* r/w: SCSI-I_O */ - -/*0a*/ u8 nc_ssid; - -/*0b*/ u8 nc_sbcl; - -/*0c*/ u8 nc_dstat; - #define DFE 0x80 /* sta: dma fifo empty */ - #define MDPE 0x40 /* int: master data parity error */ - #define BF 0x20 /* int: script: bus fault */ - #define ABRT 0x10 /* int: script: command aborted */ - #define SSI 0x08 /* int: script: single step */ - #define SIR 0x04 /* int: script: interrupt instruct. */ - #define IID 0x01 /* int: script: illegal instruct. */ - -/*0d*/ u8 nc_sstat0; - #define ILF 0x80 /* sta: data in SIDL register lsb */ - #define ORF 0x40 /* sta: data in SODR register lsb */ - #define OLF 0x20 /* sta: data in SODL register lsb */ - #define AIP 0x10 /* sta: arbitration in progress */ - #define LOA 0x08 /* sta: arbitration lost */ - #define WOA 0x04 /* sta: arbitration won */ - #define IRST 0x02 /* sta: scsi reset signal */ - #define SDP 0x01 /* sta: scsi parity signal */ - -/*0e*/ u8 nc_sstat1; - #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ - -/*0f*/ u8 nc_sstat2; - #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ - #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ - #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ - #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */ - #define LDSC 0x02 /* sta: disconnect & reconnect */ - -/*10*/ u8 nc_dsa; /* --> Base page */ -/*11*/ u8 nc_dsa1; -/*12*/ u8 nc_dsa2; -/*13*/ u8 nc_dsa3; - -/*14*/ u8 nc_istat; /* --> Main Command and status */ - #define CABRT 0x80 /* cmd: abort current operation */ - #define SRST 0x40 /* mod: reset chip */ - #define SIGP 0x20 /* r/w: message from host to ncr */ - #define SEM 0x10 /* r/w: message between host + ncr */ - #define CON 0x08 /* sta: connected to scsi */ - #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ - #define SIP 0x02 /* sta: scsi-interrupt */ - #define DIP 0x01 /* sta: host/script interrupt */ - -/*15*/ u8 nc_istat1; /* 896 and later cores only */ - #define FLSH 0x04 /* sta: chip is flushing */ - #define SRUN 0x02 /* sta: scripts are running */ - #define SIRQD 0x01 /* r/w: disable INT pin */ - -/*16*/ u8 nc_mbox0; /* 896 and later cores only */ -/*17*/ u8 nc_mbox1; /* 896 and later cores only */ - -/*18*/ u8 nc_ctest0; - #define EHP 0x04 /* 720 even host parity */ -/*19*/ u8 nc_ctest1; - -/*1a*/ u8 nc_ctest2; - #define CSIGP 0x40 - /* bits 0-2,7 rsvd for C1010 */ - -/*1b*/ u8 nc_ctest3; - #define FLF 0x08 /* cmd: flush dma fifo */ - #define CLF 0x04 /* cmd: clear dma fifo */ - #define FM 0x02 /* mod: fetch pin mode */ - #define WRIE 0x01 /* mod: write and invalidate enable */ - /* bits 4-7 rsvd for C1010 */ - -/*1c*/ u32 nc_temp; /* ### Temporary stack */ - -/*20*/ u8 nc_dfifo; -/*21*/ u8 nc_ctest4; - #define MUX 0x80 /* 720 host bus multiplex mode */ - #define BDIS 0x80 /* mod: burst disable */ - #define MPEE 0x08 /* mod: master parity error enable */ - -/*22*/ u8 nc_ctest5; - #define DFS 0x20 /* mod: dma fifo size */ - /* bits 0-1, 3-7 rsvd for C1010 */ -/*23*/ u8 nc_ctest6; - -/*24*/ u32 nc_dbc; /* ### Byte count and command */ -/*28*/ u32 nc_dnad; /* ### Next command register */ -/*2c*/ u32 nc_dsp; /* --> Script Pointer */ -/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */ - -/*34*/ u8 nc_scratcha; /* Temporary register a */ -/*35*/ u8 nc_scratcha1; -/*36*/ u8 nc_scratcha2; -/*37*/ u8 nc_scratcha3; - -/*38*/ u8 nc_dmode; - #define BL_2 0x80 /* mod: burst length shift value +2 */ - #define BL_1 0x40 /* mod: burst length shift value +1 */ - #define ERL 0x08 /* mod: enable read line */ - #define ERMP 0x04 /* mod: enable read multiple */ - #define BOF 0x02 /* mod: burst op code fetch */ - -/*39*/ u8 nc_dien; -/*3a*/ u8 nc_sbr; - -/*3b*/ u8 nc_dcntl; /* --> Script execution control */ - #define CLSE 0x80 /* mod: cache line size enable */ - #define PFF 0x40 /* cmd: pre-fetch flush */ - #define PFEN 0x20 /* mod: pre-fetch enable */ - #define EA 0x20 /* mod: 720 enable-ack */ - #define SSM 0x10 /* mod: single step mode */ - #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ - #define STD 0x04 /* cmd: start dma mode */ - #define IRQD 0x02 /* mod: irq disable */ - #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ - /* bits 0-1 rsvd for C1010 */ - -/*3c*/ u32 nc_adder; - -/*40*/ u16 nc_sien; /* -->: interrupt enable */ -/*42*/ u16 nc_sist; /* <--: interrupt status */ - #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */ - #define STO 0x0400/* sta: timeout (select) */ - #define GEN 0x0200/* sta: timeout (general) */ - #define HTH 0x0100/* sta: timeout (handshake) */ - #define MA 0x80 /* sta: phase mismatch */ - #define CMP 0x40 /* sta: arbitration complete */ - #define SEL 0x20 /* sta: selected by another device */ - #define RSL 0x10 /* sta: reselected by another device*/ - #define SGE 0x08 /* sta: gross error (over/underflow)*/ - #define UDC 0x04 /* sta: unexpected disconnect */ - #define RST 0x02 /* sta: scsi bus reset detected */ - #define PAR 0x01 /* sta: scsi parity error */ - -/*44*/ u8 nc_slpar; -/*45*/ u8 nc_swide; -/*46*/ u8 nc_macntl; -/*47*/ u8 nc_gpcntl; -/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/ -/*49*/ u8 nc_stime1; /* cmd: timeout user defined */ -/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */ - -/*4c*/ u8 nc_stest0; - -/*4d*/ u8 nc_stest1; - #define SCLK 0x80 /* Use the PCI clock as SCSI clock */ - #define DBLEN 0x08 /* clock doubler running */ - #define DBLSEL 0x04 /* clock doubler selected */ - - -/*4e*/ u8 nc_stest2; - #define ROF 0x40 /* reset scsi offset (after gross error!) */ - #define DIF 0x20 /* 720 SCSI differential mode */ - #define EXT 0x02 /* extended filtering */ - -/*4f*/ u8 nc_stest3; - #define TE 0x80 /* c: tolerAnt enable */ - #define HSC 0x20 /* c: Halt SCSI Clock */ - #define CSF 0x02 /* c: clear scsi fifo */ - -/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */ -/*52*/ u8 nc_stest4; - #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ - #define SMODE_HVD 0x40 /* High Voltage Differential */ - #define SMODE_SE 0x80 /* Single Ended */ - #define SMODE_LVD 0xc0 /* Low Voltage Differential */ - #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ - /* bits 0-5 rsvd for C1010 */ - -/*53*/ u8 nc_53_; -/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */ -/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */ - #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */ - #define PMJCTL 0x40 /* Phase Mismatch Jump Control */ - #define ENNDJ 0x20 /* Enable Non Data PM Jump */ - #define DISFC 0x10 /* Disable Auto FIFO Clear */ - #define DILS 0x02 /* Disable Internal Load/Store */ - #define DPR 0x01 /* Disable Pipe Req */ - -/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */ - #define ZMOD 0x80 /* High Impedance Mode */ - #define DIC 0x10 /* Disable Internal Cycles */ - #define DDAC 0x08 /* Disable Dual Address Cycle */ - #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */ - #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */ - #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */ - -/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */ -/*5a*/ u16 nc_5a_; - -/*5c*/ u8 nc_scr0; /* Working register B */ -/*5d*/ u8 nc_scr1; /* */ -/*5e*/ u8 nc_scr2; /* */ -/*5f*/ u8 nc_scr3; /* */ - -/*60*/ u8 nc_scrx[64]; /* Working register C-R */ -/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */ -/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */ -/*a8*/ u32 nc_sfs; /* Script Fetch Selector */ -/*ac*/ u32 nc_drs; /* DSA Relative Selector */ -/*b0*/ u32 nc_sbms; /* Static Block Move Selector */ -/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */ -/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */ -/*bc*/ u16 nc_scntl4; /* C1010 only */ - #define U3EN 0x80 /* Enable Ultra 3 */ - #define AIPEN 0x40 /* Allow check upper byte lanes */ - #define XCLKH_DT 0x08 /* Extra clock of data hold on DT - transfer edge */ - #define XCLKH_ST 0x04 /* Extra clock of data hold on ST - transfer edge */ - -/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */ -/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */ - -/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */ -/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */ -/*c8*/ u8 nc_rbc; /* Remaining Byte Count */ -/*c9*/ u8 nc_rbc1; /* */ -/*ca*/ u8 nc_rbc2; /* */ -/*cb*/ u8 nc_rbc3; /* */ - -/*cc*/ u8 nc_ua; /* Updated Address */ -/*cd*/ u8 nc_ua1; /* */ -/*ce*/ u8 nc_ua2; /* */ -/*cf*/ u8 nc_ua3; /* */ -/*d0*/ u32 nc_esa; /* Entry Storage Address */ -/*d4*/ u8 nc_ia; /* Instruction Address */ -/*d5*/ u8 nc_ia1; -/*d6*/ u8 nc_ia2; -/*d7*/ u8 nc_ia3; -/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */ -/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */ - - /* Following for C1010 only */ -/*e0*/ u16 nc_crcpad; /* CRC Value */ -/*e2*/ u8 nc_crccntl0; /* CRC control register */ - #define SNDCRC 0x10 /* Send CRC Request */ -/*e3*/ u8 nc_crccntl1; /* CRC control register */ -/*e4*/ u32 nc_crcdata; /* CRC data register */ -/*e8*/ u32 nc_e8_; /* rsvd */ -/*ec*/ u32 nc_ec_; /* rsvd */ -/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */ - -}; - -/*----------------------------------------------------------- -** -** Utility macros for the script. -** -**----------------------------------------------------------- -*/ - -#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r)) -#define REG(r) REGJ (nc_, r) - -typedef u32 ncrcmd; - -/*----------------------------------------------------------- -** -** SCSI phases -** -** DT phases illegal for ncr driver. -** -**----------------------------------------------------------- -*/ - -#define SCR_DATA_OUT 0x00000000 -#define SCR_DATA_IN 0x01000000 -#define SCR_COMMAND 0x02000000 -#define SCR_STATUS 0x03000000 -#define SCR_DT_DATA_OUT 0x04000000 -#define SCR_DT_DATA_IN 0x05000000 -#define SCR_MSG_OUT 0x06000000 -#define SCR_MSG_IN 0x07000000 - -#define SCR_ILG_OUT 0x04000000 -#define SCR_ILG_IN 0x05000000 - -/*----------------------------------------------------------- -** -** Data transfer via SCSI. -** -**----------------------------------------------------------- -** -** MOVE_ABS (LEN) -** <> -** -** MOVE_IND (LEN) -** <> -** -** MOVE_TBL -** <> -** -**----------------------------------------------------------- -*/ - -#define OPC_MOVE 0x08000000 - -#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l)) -#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l)) -#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE) - -#define SCR_CHMOV_ABS(l) ((0x00000000) | (l)) -#define SCR_CHMOV_IND(l) ((0x20000000) | (l)) -#define SCR_CHMOV_TBL (0x10000000) - -struct scr_tblmove { - u32 size; - u32 addr; -}; - -/*----------------------------------------------------------- -** -** Selection -** -**----------------------------------------------------------- -** -** SEL_ABS | SCR_ID (0..15) [ | REL_JMP] -** <> -** -** SEL_TBL | << dnad_offset>> [ | REL_JMP] -** <> -** -**----------------------------------------------------------- -*/ - -#define SCR_SEL_ABS 0x40000000 -#define SCR_SEL_ABS_ATN 0x41000000 -#define SCR_SEL_TBL 0x42000000 -#define SCR_SEL_TBL_ATN 0x43000000 - - -#ifdef SCSI_NCR_BIG_ENDIAN -struct scr_tblsel { - u8 sel_scntl3; - u8 sel_id; - u8 sel_sxfer; - u8 sel_scntl4; -}; -#else -struct scr_tblsel { - u8 sel_scntl4; - u8 sel_sxfer; - u8 sel_id; - u8 sel_scntl3; -}; -#endif - -#define SCR_JMP_REL 0x04000000 -#define SCR_ID(id) (((u32)(id)) << 16) - -/*----------------------------------------------------------- -** -** Waiting for Disconnect or Reselect -** -**----------------------------------------------------------- -** -** WAIT_DISC -** dummy: <> -** -** WAIT_RESEL -** <> -** -**----------------------------------------------------------- -*/ - -#define SCR_WAIT_DISC 0x48000000 -#define SCR_WAIT_RESEL 0x50000000 - -/*----------------------------------------------------------- -** -** Bit Set / Reset -** -**----------------------------------------------------------- -** -** SET (flags {|.. }) -** -** CLR (flags {|.. }) -** -**----------------------------------------------------------- -*/ - -#define SCR_SET(f) (0x58000000 | (f)) -#define SCR_CLR(f) (0x60000000 | (f)) - -#define SCR_CARRY 0x00000400 -#define SCR_TRG 0x00000200 -#define SCR_ACK 0x00000040 -#define SCR_ATN 0x00000008 - - - - -/*----------------------------------------------------------- -** -** Memory to memory move -** -**----------------------------------------------------------- -** -** COPY (bytecount) -** << source_address >> -** << destination_address >> -** -** SCR_COPY sets the NO FLUSH option by default. -** SCR_COPY_F does not set this option. -** -** For chips which do not support this option, -** ncr_copy_and_bind() will remove this bit. -**----------------------------------------------------------- -*/ - -#define SCR_NO_FLUSH 0x01000000 - -#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) -#define SCR_COPY_F(n) (0xc0000000 | (n)) - -/*----------------------------------------------------------- -** -** Register move and binary operations -** -**----------------------------------------------------------- -** -** SFBR_REG (reg, op, data) reg = SFBR op data -** << 0 >> -** -** REG_SFBR (reg, op, data) SFBR = reg op data -** << 0 >> -** -** REG_REG (reg, op, data) reg = reg op data -** << 0 >> -** -**----------------------------------------------------------- -** On 810A, 860, 825A, 875, 895 and 896 chips the content -** of SFBR register can be used as data (SCR_SFBR_DATA). -** The 896 has additionnal IO registers starting at -** offset 0x80. Bit 7 of register offset is stored in -** bit 7 of the SCRIPTS instruction first DWORD. -**----------------------------------------------------------- -*/ - -#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) - -#define SCR_SFBR_REG(reg,op,data) \ - (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) - -#define SCR_REG_SFBR(reg,op,data) \ - (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) - -#define SCR_REG_REG(reg,op,data) \ - (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) - - -#define SCR_LOAD 0x00000000 -#define SCR_SHL 0x01000000 -#define SCR_OR 0x02000000 -#define SCR_XOR 0x03000000 -#define SCR_AND 0x04000000 -#define SCR_SHR 0x05000000 -#define SCR_ADD 0x06000000 -#define SCR_ADDC 0x07000000 - -#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */ - -/*----------------------------------------------------------- -** -** FROM_REG (reg) SFBR = reg -** << 0 >> -** -** TO_REG (reg) reg = SFBR -** << 0 >> -** -** LOAD_REG (reg, data) reg = -** << 0 >> -** -** LOAD_SFBR(data) SFBR = -** << 0 >> -** -**----------------------------------------------------------- -*/ - -#define SCR_FROM_REG(reg) \ - SCR_REG_SFBR(reg,SCR_OR,0) - -#define SCR_TO_REG(reg) \ - SCR_SFBR_REG(reg,SCR_OR,0) - -#define SCR_LOAD_REG(reg,data) \ - SCR_REG_REG(reg,SCR_LOAD,data) - -#define SCR_LOAD_SFBR(data) \ - (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) - -/*----------------------------------------------------------- -** -** LOAD from memory to register. -** STORE from register to memory. -** -** Only supported by 810A, 860, 825A, 875, 895 and 896. -** -**----------------------------------------------------------- -** -** LOAD_ABS (LEN) -** <> -** -** LOAD_REL (LEN) (DSA relative) -** <> -** -**----------------------------------------------------------- -*/ - -#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul) -#define SCR_NO_FLUSH2 0x02000000 -#define SCR_DSA_REL2 0x10000000 - -#define SCR_LOAD_R(reg, how, n) \ - (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) - -#define SCR_STORE_R(reg, how, n) \ - (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) - -#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n) -#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n) -#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n) -#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n) - -#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n) -#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n) -#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n) -#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n) - - -/*----------------------------------------------------------- -** -** Waiting for Disconnect or Reselect -** -**----------------------------------------------------------- -** -** JUMP [ | IFTRUE/IFFALSE ( ... ) ] -** <
> -** -** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] -** <> -** -** CALL [ | IFTRUE/IFFALSE ( ... ) ] -** <
> -** -** CALLR [ | IFTRUE/IFFALSE ( ... ) ] -** <> -** -** RETURN [ | IFTRUE/IFFALSE ( ... ) ] -** <> -** -** INT [ | IFTRUE/IFFALSE ( ... ) ] -** <> -** -** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] -** <> -** -** Conditions: -** WHEN (phase) -** IF (phase) -** CARRYSET -** DATA (data, mask) -** -**----------------------------------------------------------- -*/ - -#define SCR_NO_OP 0x80000000 -#define SCR_JUMP 0x80080000 -#define SCR_JUMP64 0x80480000 -#define SCR_JUMPR 0x80880000 -#define SCR_CALL 0x88080000 -#define SCR_CALLR 0x88880000 -#define SCR_RETURN 0x90080000 -#define SCR_INT 0x98080000 -#define SCR_INT_FLY 0x98180000 - -#define IFFALSE(arg) (0x00080000 | (arg)) -#define IFTRUE(arg) (0x00000000 | (arg)) - -#define WHEN(phase) (0x00030000 | (phase)) -#define IF(phase) (0x00020000 | (phase)) - -#define DATA(D) (0x00040000 | ((D) & 0xff)) -#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) - -#define CARRYSET (0x00200000) - -/*----------------------------------------------------------- -** -** SCSI constants. -** -**----------------------------------------------------------- -*/ - -/* -** Messages -*/ - -#define M_COMPLETE COMMAND_COMPLETE -#define M_EXTENDED EXTENDED_MESSAGE -#define M_SAVE_DP SAVE_POINTERS -#define M_RESTORE_DP RESTORE_POINTERS -#define M_DISCONNECT DISCONNECT -#define M_ID_ERROR INITIATOR_ERROR -#define M_ABORT ABORT_TASK_SET -#define M_REJECT MESSAGE_REJECT -#define M_NOOP NOP -#define M_PARITY MSG_PARITY_ERROR -#define M_LCOMPLETE LINKED_CMD_COMPLETE -#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE -#define M_RESET TARGET_RESET -#define M_ABORT_TAG ABORT_TASK -#define M_CLEAR_QUEUE CLEAR_TASK_SET -#define M_INIT_REC INITIATE_RECOVERY -#define M_REL_REC RELEASE_RECOVERY -#define M_TERMINATE (0x11) -#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG -#define M_HEAD_TAG HEAD_OF_QUEUE_TAG -#define M_ORDERED_TAG ORDERED_QUEUE_TAG -#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE -#define M_IDENTIFY (0x80) - -#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER -#define M_X_SYNC_REQ EXTENDED_SDTR -#define M_X_WIDE_REQ EXTENDED_WDTR -#define M_X_PPR_REQ EXTENDED_PPR - -/* -** Status -*/ - -#define S_GOOD (0x00) -#define S_CHECK_COND (0x02) -#define S_COND_MET (0x04) -#define S_BUSY (0x08) -#define S_INT (0x10) -#define S_INT_COND_MET (0x14) -#define S_CONFLICT (0x18) -#define S_TERMINATED (0x20) -#define S_QUEUE_FULL (0x28) -#define S_ILLEGAL (0xff) -#define S_SENSE (0x80) - -/* - * End of ncrreg from FreeBSD - */ - -#endif /* defined SYM53C8XX_DEFS_H */ -- cgit v1.2.3-70-g09d2 From 7b32b8e018d8f8cc94c808a5fa84a3f889441b91 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 16 Dec 2005 21:11:37 -0700 Subject: [SCSI] Missing const in sr_vendor Fix compile warnings with current scsi-misc git tree Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sr_vendor.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c index 78274dc91f5..9dde8df2f5c 100644 --- a/drivers/scsi/sr_vendor.c +++ b/drivers/scsi/sr_vendor.c @@ -68,8 +68,8 @@ void sr_vendor_init(Scsi_CD *cd) #ifndef CONFIG_BLK_DEV_SR_VENDOR cd->vendor = VENDOR_SCSI3; #else - char *vendor = cd->device->vendor; - char *model = cd->device->model; + const char *vendor = cd->device->vendor; + const char *model = cd->device->model; /* default */ cd->vendor = VENDOR_SCSI3; -- cgit v1.2.3-70-g09d2 From aa84505fb0fb9504c61d77e8e6930a417fc404d6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 14:38:44 -0800 Subject: [PATCH] chelsio: transmit routine return values The Chelsio driver does not return the correct values from the transmit routine. It works because the values don't conflict, but it is using the wrong defines. And -ENOMEM is not a legal return value. Since t1_sge_tx is only called in one place, making it static allows compiler to be potentially inline it. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/chelsio/sge.c | 19 ++++++++++--------- drivers/net/chelsio/sge.h | 2 -- 2 files changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 53b41d99b00..2c5b849b7ba 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1332,8 +1332,8 @@ intr_handler_t t1_select_intr_handler(adapter_t *adapter) * * This runs with softirqs disabled. */ -unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid, struct net_device *dev) +static int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) { struct sge *sge = adapter->sge; struct cmdQ *q = &sge->cmdQ[qid]; @@ -1352,9 +1352,10 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, set_bit(dev->if_port, &sge->stopped_tx_queues); sge->stats.cmdQ_full[3]++; spin_unlock(&q->lock); - CH_ERR("%s: Tx ring full while queue awake!\n", - adapter->name); - return 1; + if (!netif_queue_stopped(dev)) + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return NETDEV_TX_BUSY; } if (unlikely(credits - count < q->stop_thres)) { sge->stats.cmdQ_full[3]++; @@ -1389,7 +1390,7 @@ unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); } } - return 0; + return NETDEV_TX_OK; } #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) @@ -1449,7 +1450,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(skb->len < ETH_HLEN || skb->len > dev->mtu + eth_hdr_len(skb->data))) { dev_kfree_skb_any(skb); - return NET_XMIT_SUCCESS; + return NETDEV_TX_OK; } /* @@ -1467,7 +1468,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb = skb_realloc_headroom(skb, sizeof(*cpl)); dev_kfree_skb_any(orig_skb); if (!skb) - return -ENOMEM; + return NETDEV_TX_OK; } if (!(adapter->flags & UDP_CSUM_CAPABLE) && @@ -1475,7 +1476,7 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->nh.iph->protocol == IPPROTO_UDP) if (unlikely(skb_checksum_help(skb, 0))) { dev_kfree_skb_any(skb); - return -ENOMEM; + return NETDEV_TX_OK; } /* Hmmm, assuming to catch the gratious arp... and we'll use diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 434b2558685..6d0d24a6364 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -89,8 +89,6 @@ int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); intr_handler_t t1_select_intr_handler(adapter_t *adapter); -unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid, struct net_device *netdev); int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); -- cgit v1.2.3-70-g09d2 From ee294dcda1d5dea5b909164cdc459a8483ee2983 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:44 -0800 Subject: [PATCH] skge: avoid up/down on speed changes Change the speed settings doesn't need to cause link to go down/up. It can be handled by doing the same logic as nway_reset. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 41 ++++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 00d683063c0..f77658192a1 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -88,15 +88,14 @@ MODULE_DEVICE_TABLE(pci, skge_id_table); static int skge_up(struct net_device *dev); static int skge_down(struct net_device *dev); +static void skge_phy_reset(struct skge_port *skge); static void skge_tx_clean(struct skge_port *skge); static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static void genesis_get_stats(struct skge_port *skge, u64 *data); static void yukon_get_stats(struct skge_port *skge, u64 *data); static void yukon_init(struct skge_hw *hw, int port); -static void yukon_reset(struct skge_hw *hw, int port); static void genesis_mac_init(struct skge_hw *hw, int port); -static void genesis_reset(struct skge_hw *hw, int port); static void genesis_link_up(struct skge_port *skge); /* Avoid conditionals by using array */ @@ -276,10 +275,9 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) skge->autoneg = ecmd->autoneg; skge->advertising = ecmd->advertising; - if (netif_running(dev)) { - skge_down(dev); - skge_up(dev); - } + if (netif_running(dev)) + skge_phy_reset(skge); + return (0); } @@ -430,21 +428,11 @@ static void skge_set_msglevel(struct net_device *netdev, u32 value) static int skge_nway_reset(struct net_device *dev) { struct skge_port *skge = netdev_priv(dev); - struct skge_hw *hw = skge->hw; - int port = skge->port; if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev)) return -EINVAL; - spin_lock_bh(&hw->phy_lock); - if (hw->chip_id == CHIP_ID_GENESIS) { - genesis_reset(hw, port); - genesis_mac_init(hw, port); - } else { - yukon_reset(hw, port); - yukon_init(hw, port); - } - spin_unlock_bh(&hw->phy_lock); + skge_phy_reset(skge); return 0; } @@ -2019,6 +2007,25 @@ static void yukon_phy_intr(struct skge_port *skge) /* XXX restart autonegotiation? */ } +static void skge_phy_reset(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + netif_stop_queue(skge->netdev); + netif_carrier_off(skge->netdev); + + spin_lock_bh(&hw->phy_lock); + if (hw->chip_id == CHIP_ID_GENESIS) { + genesis_reset(hw, port); + genesis_mac_init(hw, port); + } else { + yukon_reset(hw, port); + yukon_init(hw, port); + } + spin_unlock_bh(&hw->phy_lock); +} + /* Basic MII support */ static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { -- cgit v1.2.3-70-g09d2 From e8df8554605f014765732605667145c0824a12b7 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:45 -0800 Subject: [PATCH] skge: avoid up/down on pause param changes Change the pause settings doesn't need to cause link to go down/up. It can be handled by the phy_reset code. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index f77658192a1..14bf4cc5b07 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -504,10 +504,8 @@ static int skge_set_pauseparam(struct net_device *dev, else skge->flow_control = FLOW_MODE_NONE; - if (netif_running(dev)) { - skge_down(dev); - skge_up(dev); - } + if (netif_running(dev)) + skge_phy_reset(skge); return 0; } -- cgit v1.2.3-70-g09d2 From 7731a4ea1bbb7c9336bcdec8ef4050cf08a35268 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:46 -0800 Subject: [PATCH] skge: handle out of memory on MTU size changes Changing the MTU size causes the receiver to have to reallocate buffers. If this allocation fails, then we need to return an error, and take the device offline. It can then be brought back up or reconfigured for a smaller MTU. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 14bf4cc5b07..96b661b1f6c 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2192,6 +2192,7 @@ static int skge_up(struct net_device *dev) kfree(skge->rx_ring.start); free_pci_mem: pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + skge->mem = NULL; return err; } @@ -2202,6 +2203,9 @@ static int skge_down(struct net_device *dev) struct skge_hw *hw = skge->hw; int port = skge->port; + if (skge->mem == NULL) + return 0; + if (netif_msg_ifdown(skge)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); @@ -2258,6 +2262,7 @@ static int skge_down(struct net_device *dev) kfree(skge->rx_ring.start); kfree(skge->tx_ring.start); pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + skge->mem = NULL; return 0; } @@ -2418,18 +2423,23 @@ static void skge_tx_timeout(struct net_device *dev) static int skge_change_mtu(struct net_device *dev, int new_mtu) { - int err = 0; - int running = netif_running(dev); + int err; if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; + if (!netif_running(dev)) { + dev->mtu = new_mtu; + return 0; + } + + skge_down(dev); - if (running) - skge_down(dev); dev->mtu = new_mtu; - if (running) - skge_up(dev); + + err = skge_up(dev); + if (err) + dev_close(dev); return err; } -- cgit v1.2.3-70-g09d2 From 2770b5172e9b3d135b16d1e5d8344919ac09319d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:47 -0800 Subject: [PATCH] skge: get rid of Yukon2 defines Don't need to keep Yukon-2 related definitions around for Skge driver that is only for Yukon-1 and Genesis. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.h | 73 +----------------------------------------------------- 1 file changed, 1 insertion(+), 72 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.h b/drivers/net/skge.h index ee123c15f54..2efdacc290e 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -475,18 +475,6 @@ enum { Q_T2 = 0x40, /* 32 bit Test Register 2 */ Q_T3 = 0x44, /* 32 bit Test Register 3 */ -/* Yukon-2 */ - Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ - Q_WM = 0x40, /* 16 bit FIFO Watermark */ - Q_AL = 0x42, /* 8 bit FIFO Alignment */ - Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ - Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ - Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ - Q_RL = 0x4a, /* 8 bit FIFO Read Level */ - Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ - Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ - Q_WL = 0x4e, /* 8 bit FIFO Write Level */ - Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ }; #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) @@ -675,22 +663,16 @@ enum { LED_OFF = 1<<0, /* switch LED off */ }; -/* Receive GMAC FIFO (YUKON and Yukon-2) */ +/* Receive GMAC FIFO (YUKON) */ enum { RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ - RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ - - RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ - RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ - RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ - RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ }; @@ -855,48 +837,6 @@ enum { GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ }; -/* Status BMU Registers (Yukon-2 only)*/ -enum { - STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ - STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ - /* 0x0e85 - 0x0e86: reserved */ - STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */ - STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */ - STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ - STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ - STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ - STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ - STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ - STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ - -/* FIFO Control/Status Registers (Yukon-2 only)*/ - STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ - STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ - STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ - STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ - STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ - STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ - STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ - -/* Level and ISR Timer Registers (Yukon-2 only)*/ - STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ - STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */ - STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */ - STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */ - STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ - STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ - STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ - STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ - STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ - STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ - STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */ - STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */ - - ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ - ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ - ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ - ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ -}; enum { LINKLED_OFF = 0x01, @@ -923,8 +863,6 @@ enum { WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ - WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ - WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ /* WOL Pattern Length Registers (YUKON only) */ @@ -1641,15 +1579,6 @@ enum { PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ }; -/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ -/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ -enum { - PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ - PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ - PHY_M_MAC_MD_COPPER = 5,/* Copper only */ - PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ -}; -#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ enum { -- cgit v1.2.3-70-g09d2 From 3b8bb472ad8eee6f42bc82647ff5d6d9bfe49e20 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:48 -0800 Subject: [PATCH] skge: handle out of memory on ring parameter change If changing ring parameters is unable to allocate memory, we need to return an error and take the device down. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5715 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 96b661b1f6c..9ff54ea713c 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -397,6 +397,7 @@ static int skge_set_ring_param(struct net_device *dev, struct ethtool_ringparam *p) { struct skge_port *skge = netdev_priv(dev); + int err; if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE || p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE) @@ -407,7 +408,9 @@ static int skge_set_ring_param(struct net_device *dev, if (netif_running(dev)) { skge_down(dev); - skge_up(dev); + err = skge_up(dev); + if (err) + dev_close(dev); } return 0; -- cgit v1.2.3-70-g09d2 From f15943f500c2d3edaee6b4c23dfd738715e74618 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 Dec 2005 15:47:49 -0800 Subject: [PATCH] skge: version number (1.3) Enough changes for one version. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 9ff54ea713c..e812dbb09c8 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -43,7 +43,7 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 -- cgit v1.2.3-70-g09d2 From 26b7625c46d5d72570252d30fec6814682476684 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 Dec 2005 19:25:23 -0800 Subject: [PATCH] git-netdev-all: s2io warning fix drivers/net/s2io.c: In function `s2io_txdl_getskb': drivers/net/s2io.c:2023: warning: cast from pointer to integer of different size drivers/net/s2io.c: In function `s2io_open': drivers/net/s2io.c:3325: warning: long long unsigned int format, u64 arg (arg 3) drivers/net/s2io.c:3333: warning: long long unsigned int format, u64 arg (arg 3) drivers/net/s2io.c: In function `s2io_eeprom_test': drivers/net/s2io.c:4749: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/net/s2io.c:4749: warning: long long unsigned int format, u64 arg (arg 4) drivers/net/s2io.c:4768: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/net/s2io.c:4768: warning: long long unsigned int format, u64 arg (arg 4) I had to update this patch because more warnings have just appeared. You cannot print a u64 with %l or %ll. You do not know what type the architecture is using. It must be cast to a type which matches the printf control string - unsigned long long. The patch also fixes some overly-long strings. Please try to keep the code looking neat in an 80-col window. Cc: Jeff Garzik Cc: Ananda Raju Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 258128a6a27..89c46787676 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2020,7 +2020,7 @@ static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, in u16 j, frg_cnt; txds = txdlp; - if (txds->Host_Control == (u64) nic->ufo_in_band_v) { + if (txds->Host_Control == (u64)(long)nic->ufo_in_band_v) { pci_unmap_single(nic->pdev, (dma_addr_t) txds->Buffer_Pointer, sizeof(u64), PCI_DMA_TODEVICE); @@ -3323,7 +3323,7 @@ failed\n", dev->name); s2io_msix_fifo_handle, 0, sp->desc1, sp->s2io_entries[i].arg); DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1, - sp->msix_info[i].addr); + (unsigned long long)sp->msix_info[i].addr); } else { sprintf(sp->desc2, "%s:MSI-X-%d-RX", dev->name, i); @@ -3331,7 +3331,7 @@ failed\n", dev->name); s2io_msix_ring_handle, 0, sp->desc2, sp->s2io_entries[i].arg); DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2, - sp->msix_info[i].addr); + (unsigned long long)sp->msix_info[i].addr); } if (err) { DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \ @@ -4746,7 +4746,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) fail = 1; if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " + "Data written %llx Data read %llx\n", + dev->name, (unsigned long long)0x12345, + (unsigned long long)ret_data); fail = 1; } @@ -4765,7 +4768,10 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) fail = 1; if (ret_data != 0x012345) { - DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. Data written %llx Data read %llx\n", dev->name, (u64)0x12345, ret_data); + DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " + "Data written %llx Data read %llx\n", + dev->name, (unsigned long long)0x12345, + (unsigned long long)ret_data); fail = 1; } -- cgit v1.2.3-70-g09d2 From b35de2eb389aa1889941ec3d02fff6d7a2569825 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 15 Dec 2005 13:42:21 +0100 Subject: [PATCH] spidernet: fix Kconfig after BPA->CELL rename We changed the name of the Kconfig symbols along with the move to arch/powerpc. This one hunk got lost during the conversion. From: Jens.Osterkamp@de.ibm.com Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0f2e4c11f80..e2fa29b612c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2133,7 +2133,7 @@ config BNX2 config SPIDER_NET tristate "Spider Gigabit Ethernet driver" - depends on PCI && PPC_BPA + depends on PCI && PPC_CELL help This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. -- cgit v1.2.3-70-g09d2 From edd702e847fb8a9774a2ed8d50d2b8299b8c7f89 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 15 Dec 2005 12:18:00 -0800 Subject: [PATCH] skge: error handling on resume Also have to handle out of memory condition on resume. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index e812dbb09c8..b8dfe337313 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -3416,8 +3416,8 @@ static int skge_resume(struct pci_dev *pdev) struct net_device *dev = hw->dev[i]; if (dev) { netif_device_attach(dev); - if (netif_running(dev)) - skge_up(dev); + if (netif_running(dev) && skge_up(dev)) + dev_close(dev); } } return 0; -- cgit v1.2.3-70-g09d2 From 1b537565a85cbe5cc9d5174d348a9014381af718 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 20 Dec 2005 15:08:07 -0800 Subject: [PATCH] sky2: handle out of memory on admin changes Don't die if we run out of memory on mtu or ring parameter change. For other admin operations, don't rebuild Rx ring, just restart the PHY. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 84 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 52 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7af72cdd473..1d183d5177a 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -481,6 +481,14 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } +/* Force a renegotiation */ +static void sky2_phy_reinit(struct sky2_port *sky2) +{ + down(&sky2->phy_sema); + sky2_phy_init(sky2->hw, sky2->port); + up(&sky2->phy_sema); +} + static void sky2_mac_init(struct sky2_hw *hw, unsigned port) { struct sky2_port *sky2 = netdev_priv(hw->dev[port]); @@ -1014,18 +1022,22 @@ static int sky2_up(struct net_device *dev) return 0; err_out: - if (sky2->rx_le) + if (sky2->rx_le) { pci_free_consistent(hw->pdev, RX_LE_BYTES, sky2->rx_le, sky2->rx_le_map); - if (sky2->tx_le) + sky2->rx_le = NULL; + } + if (sky2->tx_le) { pci_free_consistent(hw->pdev, TX_RING_SIZE * sizeof(struct sky2_tx_le), sky2->tx_le, sky2->tx_le_map); - if (sky2->tx_ring) - kfree(sky2->tx_ring); - if (sky2->rx_ring) - kfree(sky2->rx_ring); + sky2->tx_le = NULL; + } + kfree(sky2->tx_ring); + kfree(sky2->rx_ring); + sky2->tx_ring = NULL; + sky2->rx_ring = NULL; return err; } @@ -1291,6 +1303,10 @@ static int sky2_down(struct net_device *dev) unsigned port = sky2->port; u16 ctrl; + /* Never really got started! */ + if (!sky2->tx_le) + return 0; + if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); @@ -1365,6 +1381,12 @@ static int sky2_down(struct net_device *dev) sky2->tx_le, sky2->tx_le_map); kfree(sky2->tx_ring); + sky2->tx_le = NULL; + sky2->rx_le = NULL; + + sky2->rx_ring = NULL; + sky2->tx_ring = NULL; + return 0; } @@ -1636,12 +1658,17 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD); err = sky2_rx_start(sky2); - gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); - - netif_poll_disable(hw->dev[0]); - netif_wake_queue(dev); sky2_write32(hw, B0_IMSK, hw->intr_mask); + if (err) + dev_close(dev); + else { + gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); + + netif_poll_enable(hw->dev[0]); + netif_wake_queue(dev); + } + return err; } @@ -2315,10 +2342,8 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) sky2->autoneg = ecmd->autoneg; sky2->advertising = ecmd->advertising; - if (netif_running(dev)) { - sky2_down(dev); - sky2_up(dev); - } + if (netif_running(dev)) + sky2_phy_reinit(sky2); return 0; } @@ -2389,17 +2414,11 @@ static u32 sky2_get_msglevel(struct net_device *netdev) static int sky2_nway_reset(struct net_device *dev) { struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; if (sky2->autoneg != AUTONEG_ENABLE) return -EINVAL; - netif_stop_queue(dev); - - down(&sky2->phy_sema); - sky2_phy_reset(hw, sky2->port); - sky2_phy_init(hw, sky2->port); - up(&sky2->phy_sema); + sky2_phy_reinit(sky2); return 0; } @@ -2477,20 +2496,20 @@ static int sky2_set_mac_address(struct net_device *dev, void *p) { struct sky2_port *sky2 = netdev_priv(dev); struct sockaddr *addr = p; - int err = 0; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - sky2_down(dev); memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); memcpy_toio(sky2->hw->regs + B2_MAC_1 + sky2->port * 8, dev->dev_addr, ETH_ALEN); memcpy_toio(sky2->hw->regs + B2_MAC_2 + sky2->port * 8, dev->dev_addr, ETH_ALEN); - if (dev->flags & IFF_UP) - err = sky2_up(dev); - return err; + + if (netif_running(dev)) + sky2_phy_reinit(sky2); + + return 0; } static void sky2_set_multicast(struct net_device *dev) @@ -2648,10 +2667,7 @@ static int sky2_set_pauseparam(struct net_device *dev, sky2->tx_pause = ecmd->tx_pause != 0; sky2->rx_pause = ecmd->rx_pause != 0; - if (netif_running(dev)) { - sky2_down(dev); - err = sky2_up(dev); - } + sky2_phy_reinit(sky2); return err; } @@ -2813,8 +2829,11 @@ static int sky2_set_ringparam(struct net_device *dev, sky2->rx_pending = ering->rx_pending; sky2->tx_pending = ering->tx_pending; - if (netif_running(dev)) + if (netif_running(dev)) { err = sky2_up(dev); + if (err) + dev_close(dev); + } return err; } @@ -3195,7 +3214,8 @@ static int sky2_resume(struct pci_dev *pdev) if (dev) { if (netif_running(dev)) { netif_device_attach(dev); - sky2_up(dev); + if (sky2_up(dev)) + dev_close(dev); } } } -- cgit v1.2.3-70-g09d2 From 6ed995bb29f042eece8392d9bae0b83f84bcdb23 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 20 Dec 2005 15:08:08 -0800 Subject: [PATCH] sky2: don't lose multicast addresses Don't lose multicast addresses when link goes down or ring parameters change. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1d183d5177a..c7b4da1d717 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1478,8 +1478,6 @@ static void sky2_link_down(struct sky2_port *sky2) | PHY_M_AN_ASP); } - sky2_phy_reset(hw, port); - netif_carrier_off(sky2->netdev); netif_stop_queue(sky2->netdev); @@ -2833,6 +2831,8 @@ static int sky2_set_ringparam(struct net_device *dev, err = sky2_up(dev); if (err) dev_close(dev); + else + sky2_set_multicast(dev); } return err; -- cgit v1.2.3-70-g09d2 From 6e15b7124990e4b91645601e7a90d3fe72873336 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 20 Dec 2005 15:08:09 -0800 Subject: [PATCH] sky2: handle hardware packet overrun It is possible for hardware to get confused when an oversized frame is received. In that case, just drop the packet and increment a counter. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c7b4da1d717..9b428e423c3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1694,6 +1694,9 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; + if ((status >> 16) != length || length > sky2->rx_bufsize) + goto oversize; + if (length < copybreak) { skb = alloc_skb(length + 2, GFP_ATOMIC); if (!skb) @@ -1735,7 +1738,13 @@ resubmit: return skb; +oversize: + ++sky2->net_stats.rx_over_errors; + goto resubmit; + error: + ++sky2->net_stats.rx_errors; + if (netif_msg_rx_err(sky2)) printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n", sky2->netdev->name, status, length); -- cgit v1.2.3-70-g09d2 From c4c48d83e9ffb1c25cccd59d5ea9dda6ded01faf Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 20 Dec 2005 15:08:10 -0800 Subject: [PATCH] sky2: version 0.11 Version number change. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 9b428e423c3..f5d697c0c03 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -57,7 +57,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "0.10" +#define DRV_VERSION "0.11" #define PFX DRV_NAME " " /* -- cgit v1.2.3-70-g09d2 From 352dd1df32e672be4cff71132eb9c06a257872fe Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Tue, 27 Dec 2005 23:43:31 -0500 Subject: gitignore: misc files Ignore all files generated from *_shipped files, plus a few others. Signed-off-by: Brian Gerst Signed-off-by: Sam Ravnborg --- drivers/char/.gitignore | 2 +- drivers/ieee1394/.gitignore | 1 + drivers/md/.gitignore | 4 ++++ drivers/net/wan/.gitignore | 1 + drivers/scsi/.gitignore | 3 +++ drivers/scsi/aic7xxx/.gitignore | 6 ++++++ scripts/genksyms/.gitignore | 4 ++++ scripts/kconfig/.gitignore | 1 + 8 files changed, 21 insertions(+), 1 deletion(-) create mode 100644 drivers/ieee1394/.gitignore create mode 100644 drivers/md/.gitignore create mode 100644 drivers/net/wan/.gitignore create mode 100644 drivers/scsi/.gitignore create mode 100644 drivers/scsi/aic7xxx/.gitignore create mode 100644 scripts/genksyms/.gitignore (limited to 'drivers') diff --git a/drivers/char/.gitignore b/drivers/char/.gitignore index 2b6b1d772ed..73dfdcebfbb 100644 --- a/drivers/char/.gitignore +++ b/drivers/char/.gitignore @@ -1,3 +1,3 @@ consolemap_deftbl.c defkeymap.c - +qtronixmap.c diff --git a/drivers/ieee1394/.gitignore b/drivers/ieee1394/.gitignore new file mode 100644 index 00000000000..33da10a2532 --- /dev/null +++ b/drivers/ieee1394/.gitignore @@ -0,0 +1 @@ +oui.c diff --git a/drivers/md/.gitignore b/drivers/md/.gitignore new file mode 100644 index 00000000000..a7afec6b19c --- /dev/null +++ b/drivers/md/.gitignore @@ -0,0 +1,4 @@ +mktables +raid6altivec*.c +raid6int*.c +raid6tables.c diff --git a/drivers/net/wan/.gitignore b/drivers/net/wan/.gitignore new file mode 100644 index 00000000000..dae3ea6bb18 --- /dev/null +++ b/drivers/net/wan/.gitignore @@ -0,0 +1 @@ +wanxlfw.inc diff --git a/drivers/scsi/.gitignore b/drivers/scsi/.gitignore new file mode 100644 index 00000000000..b385af31435 --- /dev/null +++ b/drivers/scsi/.gitignore @@ -0,0 +1,3 @@ +53c700_d.h +53c7xx_d.h +53c7xx_u.h diff --git a/drivers/scsi/aic7xxx/.gitignore b/drivers/scsi/aic7xxx/.gitignore new file mode 100644 index 00000000000..b8ee24d5748 --- /dev/null +++ b/drivers/scsi/aic7xxx/.gitignore @@ -0,0 +1,6 @@ +aic79xx_reg.h +aic79xx_reg_print.c +aic79xx_seq.h +aic7xxx_reg.h +aic7xxx_reg_print.c +aic7xxx_seq.h diff --git a/scripts/genksyms/.gitignore b/scripts/genksyms/.gitignore new file mode 100644 index 00000000000..be5cadb1b90 --- /dev/null +++ b/scripts/genksyms/.gitignore @@ -0,0 +1,4 @@ +keywords.c +lex.c +parse.[ch] +genksyms diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore index 2dac3442e0a..e8ad1f6b3da 100644 --- a/scripts/kconfig/.gitignore +++ b/scripts/kconfig/.gitignore @@ -5,6 +5,7 @@ config* lex.*.c *.tab.c *.tab.h +zconf.hash.c # # configuration programs -- cgit v1.2.3-70-g09d2 From 4c98cfef2efa6b6662ac28c4f0069964bbd9fdf9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 29 Nov 2005 09:09:32 +0100 Subject: [ALSA] PATCH] Add PM support to PnP drivers Add suspend/resume callback to pnp_driver and pnp_card_driver. Signed-off-by: Takashi Iwai --- drivers/pnp/card.c | 25 +++++++++++++++++++++++++ drivers/pnp/driver.c | 20 ++++++++++++++++++++ include/linux/pnp.h | 5 +++++ 3 files changed, 50 insertions(+) (limited to 'drivers') diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c index bd7c966ea2d..0ecbe4edbec 100644 --- a/drivers/pnp/card.c +++ b/drivers/pnp/card.c @@ -69,6 +69,7 @@ static int card_probe(struct pnp_card * card, struct pnp_card_driver * drv) return 0; clink->card = card; clink->driver = drv; + clink->pm_state = PMSG_ON; if (drv->probe) { if (drv->probe(clink, id)>=0) return 1; @@ -333,6 +334,28 @@ void pnp_release_card_device(struct pnp_dev * dev) up_write(&dev->dev.bus->subsys.rwsem); } +/* + * suspend/resume callbacks + */ +static int card_suspend(struct pnp_dev *dev, pm_message_t state) +{ + struct pnp_card_link *link = dev->card_link; + if (link->pm_state.event == state.event) + return 0; + link->pm_state = state; + return link->driver->suspend(link, state); +} + +static int card_resume(struct pnp_dev *dev) +{ + struct pnp_card_link *link = dev->card_link; + if (link->pm_state.event == PM_EVENT_ON) + return 0; + link->pm_state = PMSG_ON; + link->driver->resume(link); + return 0; +} + /** * pnp_register_card_driver - registers a PnP card driver with the PnP Layer * @drv: pointer to the driver to register @@ -348,6 +371,8 @@ int pnp_register_card_driver(struct pnp_card_driver * drv) drv->link.flags = drv->flags; drv->link.probe = NULL; drv->link.remove = &card_remove_first; + drv->link.suspend = drv->suspend ? card_suspend : NULL; + drv->link.resume = drv->resume ? card_resume : NULL; spin_lock(&pnp_lock); list_add_tail(&drv->global_list, &pnp_card_drivers); diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index d3ccce706ab..ea2cb9a8b21 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -146,10 +146,30 @@ static int pnp_bus_match(struct device *dev, struct device_driver *drv) return 1; } +static int pnp_bus_suspend(struct device *dev, pm_message_t state) +{ + struct pnp_dev * pnp_dev = to_pnp_dev(dev); + struct pnp_driver * pnp_drv = pnp_dev->driver; + + if (pnp_drv && pnp_drv->suspend) + return pnp_drv->suspend(pnp_dev, state); + return 0; +} + +static void pnp_bus_resume(struct device *dev) +{ + struct pnp_dev * pnp_dev = to_pnp_dev(dev); + struct pnp_driver * pnp_drv = pnp_dev->driver; + + if (pnp_drv && pnp_drv->resume) + pnp_drv->resume(pnp_dev); +} struct bus_type pnp_bus_type = { .name = "pnp", .match = pnp_bus_match, + .suspend = pnp_bus_suspend, + .resume = pnp_bus_resume, }; diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 584d57cb393..472319fcf63 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -162,6 +162,7 @@ struct pnp_card_link { struct pnp_card * card; struct pnp_card_driver * driver; void * driver_data; + pm_message_t pm_state; }; static inline void *pnp_get_card_drvdata (struct pnp_card_link *pcard) @@ -294,6 +295,8 @@ struct pnp_driver { unsigned int flags; int (*probe) (struct pnp_dev *dev, const struct pnp_device_id *dev_id); void (*remove) (struct pnp_dev *dev); + int (*suspend) (struct pnp_dev *dev, pm_message_t state); + int (*resume) (struct pnp_dev *dev); struct device_driver driver; }; @@ -306,6 +309,8 @@ struct pnp_card_driver { unsigned int flags; int (*probe) (struct pnp_card_link *card, const struct pnp_card_device_id *card_id); void (*remove) (struct pnp_card_link *card); + int (*suspend) (struct pnp_card_link *card, pm_message_t state); + int (*resume) (struct pnp_card_link *card); struct pnp_driver link; }; -- cgit v1.2.3-70-g09d2 From 68094e3251a664ee1389fcf179497237cbf78331 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Nov 2005 09:09:32 +0100 Subject: [ALSA] [PATCH] alsa: Improved PnP suspend support Also use the PnP functions to start/stop the devices during the suspend so that drivers will not have to duplicate this code. Cc: Adam Belay Cc: Jaroslav Kysela Cc: Takashi Iwai Signed-off-by: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- drivers/pnp/driver.c | 37 ++++++++++++++++++++---- drivers/pnp/manager.c | 78 ++++++++++++++++++++++++++++++++++++++------------- include/linux/pnp.h | 4 +++ 3 files changed, 95 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index ea2cb9a8b21..15fb758a9e5 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -150,19 +150,46 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state) { struct pnp_dev * pnp_dev = to_pnp_dev(dev); struct pnp_driver * pnp_drv = pnp_dev->driver; + int error; + + if (!pnp_drv) + return 0; + + if (pnp_drv->suspend) { + error = pnp_drv->suspend(pnp_dev, state); + if (error) + return error; + } + + if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE) && + pnp_can_disable(pnp_dev)) { + error = pnp_stop_dev(pnp_dev); + if (error) + return error; + } - if (pnp_drv && pnp_drv->suspend) - return pnp_drv->suspend(pnp_dev, state); return 0; } -static void pnp_bus_resume(struct device *dev) +static int pnp_bus_resume(struct device *dev) { struct pnp_dev * pnp_dev = to_pnp_dev(dev); struct pnp_driver * pnp_drv = pnp_dev->driver; + int error; + + if (!pnp_drv) + return 0; + + if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) { + error = pnp_start_dev(pnp_dev); + if (error) + return error; + } - if (pnp_drv && pnp_drv->resume) - pnp_drv->resume(pnp_dev); + if (pnp_drv->resume) + return pnp_drv->resume(pnp_dev); + + return 0; } struct bus_type pnp_bus_type = { diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 261668618b2..c4256aa32bc 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -469,6 +469,53 @@ int pnp_auto_config_dev(struct pnp_dev *dev) return -EBUSY; } +/** + * pnp_start_dev - low-level start of the PnP device + * @dev: pointer to the desired device + * + * assumes that resources have alread been allocated + */ + +int pnp_start_dev(struct pnp_dev *dev) +{ + if (!pnp_can_write(dev)) { + pnp_info("Device %s does not supported activation.", dev->dev.bus_id); + return -EINVAL; + } + + if (dev->protocol->set(dev, &dev->res)<0) { + pnp_err("Failed to activate device %s.", dev->dev.bus_id); + return -EIO; + } + + pnp_info("Device %s activated.", dev->dev.bus_id); + + return 0; +} + +/** + * pnp_stop_dev - low-level disable of the PnP device + * @dev: pointer to the desired device + * + * does not free resources + */ + +int pnp_stop_dev(struct pnp_dev *dev) +{ + if (!pnp_can_disable(dev)) { + pnp_info("Device %s does not supported disabling.", dev->dev.bus_id); + return -EINVAL; + } + if (dev->protocol->disable(dev)<0) { + pnp_err("Failed to disable device %s.", dev->dev.bus_id); + return -EIO; + } + + pnp_info("Device %s disabled.", dev->dev.bus_id); + + return 0; +} + /** * pnp_activate_dev - activates a PnP device for use * @dev: pointer to the desired device @@ -477,6 +524,8 @@ int pnp_auto_config_dev(struct pnp_dev *dev) */ int pnp_activate_dev(struct pnp_dev *dev) { + int error; + if (!dev) return -EINVAL; if (dev->active) { @@ -487,18 +536,11 @@ int pnp_activate_dev(struct pnp_dev *dev) if (pnp_auto_config_dev(dev)) return -EBUSY; - if (!pnp_can_write(dev)) { - pnp_info("Device %s does not supported activation.", dev->dev.bus_id); - return -EINVAL; - } - - if (dev->protocol->set(dev, &dev->res)<0) { - pnp_err("Failed to activate device %s.", dev->dev.bus_id); - return -EIO; - } + error = pnp_start_dev(dev); + if (error) + return error; dev->active = 1; - pnp_info("Device %s activated.", dev->dev.bus_id); return 1; } @@ -511,23 +553,19 @@ int pnp_activate_dev(struct pnp_dev *dev) */ int pnp_disable_dev(struct pnp_dev *dev) { + int error; + if (!dev) return -EINVAL; if (!dev->active) { return 0; /* the device is already disabled */ } - if (!pnp_can_disable(dev)) { - pnp_info("Device %s does not supported disabling.", dev->dev.bus_id); - return -EINVAL; - } - if (dev->protocol->disable(dev)<0) { - pnp_err("Failed to disable device %s.", dev->dev.bus_id); - return -EIO; - } + error = pnp_stop_dev(dev); + if (error) + return error; dev->active = 0; - pnp_info("Device %s disabled.", dev->dev.bus_id); /* release the resources so that other devices can use them */ down(&pnp_res_mutex); @@ -558,6 +596,8 @@ EXPORT_SYMBOL(pnp_manual_config_dev); #if 0 EXPORT_SYMBOL(pnp_auto_config_dev); #endif +EXPORT_SYMBOL(pnp_start_dev); +EXPORT_SYMBOL(pnp_stop_dev); EXPORT_SYMBOL(pnp_activate_dev); EXPORT_SYMBOL(pnp_disable_dev); EXPORT_SYMBOL(pnp_resource_change); diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 472319fcf63..93b0959eb40 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -385,6 +385,8 @@ void pnp_init_resource_table(struct pnp_resource_table *table); int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode); int pnp_auto_config_dev(struct pnp_dev *dev); int pnp_validate_config(struct pnp_dev *dev); +int pnp_start_dev(struct pnp_dev *dev); +int pnp_stop_dev(struct pnp_dev *dev); int pnp_activate_dev(struct pnp_dev *dev); int pnp_disable_dev(struct pnp_dev *dev); void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size); @@ -428,6 +430,8 @@ static inline void pnp_init_resource_table(struct pnp_resource_table *table) { } static inline int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res, int mode) { return -ENODEV; } static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_validate_config(struct pnp_dev *dev) { return -ENODEV; } +static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; } +static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; } static inline void pnp_resource_change(struct resource *resource, unsigned long start, unsigned long size) { } -- cgit v1.2.3-70-g09d2 From 4a4efbdee278b2f4ed91aad2db5c006ff754276e Mon Sep 17 00:00:00 2001 From: Matt Mackall Date: Tue, 3 Jan 2006 13:27:11 +0100 Subject: s/retreiv/retriev/g As everyone knows, the rule is: "i before e.. um.. always." Signed-off-by: Matt Mackall Signed-off-by: Adrian Bunk --- drivers/char/n_hdlc.c | 2 +- drivers/net/tlan.c | 4 ++-- drivers/usb/serial/ftdi_sio.h | 2 +- drivers/video/aty/radeon_base.c | 16 ++++++++-------- fs/reiserfs/xattr.c | 4 ++-- net/irda/iriap.c | 2 +- scripts/kconfig/util.c | 2 +- 7 files changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c index c3660d8781a..a133a62f3d5 100644 --- a/drivers/char/n_hdlc.c +++ b/drivers/char/n_hdlc.c @@ -562,7 +562,7 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, } /* end of n_hdlc_tty_receive() */ /** - * n_hdlc_tty_read - Called to retreive one frame of data (if available) + * n_hdlc_tty_read - Called to retrieve one frame of data (if available) * @tty - pointer to tty instance data * @file - pointer to open file object * @buf - pointer to returned data buffer diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index 942fae0f213..c2506b56a18 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -2865,11 +2865,11 @@ void TLan_PhyMonitor( struct net_device *dev ) * for this device. * phy The address of the PHY to be queried. * reg The register whose contents are to be - * retreived. + * retrieved. * val A pointer to a variable to store the * retrieved value. * - * This function uses the TLAN's MII bus to retreive the contents + * This function uses the TLAN's MII bus to retrieve the contents * of a given register on a PHY. It sends the appropriate info * and then reads the 16-bit register value from the MII bus via * the TLAN SIO register. diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 773ea3eca08..da004dd025f 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -714,7 +714,7 @@ typedef enum { */ /* FTDI_SIO_GET_MODEM_STATUS */ -/* Retreive the current value of the modem status register */ +/* Retrieve the current value of the modem status register */ #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 4f01ccc02aa..156db84cb36 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -594,7 +594,7 @@ static int __devinit radeon_probe_pll_params(struct radeonfb_info *rinfo) } /* - * Retreive PLL infos by different means (BIOS, Open Firmware, register probing...) + * Retrieve PLL infos by different means (BIOS, Open Firmware, register probing...) */ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) { @@ -660,17 +660,17 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) #ifdef CONFIG_PPC_OF /* - * Retreive PLL infos from Open Firmware first + * Retrieve PLL infos from Open Firmware first */ if (!force_measure_pll && radeon_read_xtal_OF(rinfo) == 0) { - printk(KERN_INFO "radeonfb: Retreived PLL infos from Open Firmware\n"); + printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n"); goto found; } #endif /* CONFIG_PPC_OF */ /* * Check out if we have an X86 which gave us some PLL informations - * and if yes, retreive them + * and if yes, retrieve them */ if (!force_measure_pll && rinfo->bios_seg) { u16 pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30); @@ -682,7 +682,7 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12); rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16); - printk(KERN_INFO "radeonfb: Retreived PLL infos from BIOS\n"); + printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n"); goto found; } @@ -691,7 +691,7 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) * probe them */ if (radeon_probe_pll_params(rinfo) == 0) { - printk(KERN_INFO "radeonfb: Retreived PLL infos from registers\n"); + printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n"); goto found; } @@ -702,7 +702,7 @@ static void __devinit radeon_get_pllinfo(struct radeonfb_info *rinfo) found: /* - * Some methods fail to retreive SCLK and MCLK values, we apply default + * Some methods fail to retrieve SCLK and MCLK values, we apply default * settings in this case (200Mhz). If that really happne often, we could * fetch from registers instead... */ @@ -2393,7 +2393,7 @@ static int radeonfb_pci_register (struct pci_dev *pdev, rinfo->mapped_vram/1024); /* - * Map the BIOS ROM if any and retreive PLL parameters from + * Map the BIOS ROM if any and retrieve PLL parameters from * the BIOS. We skip that on mobility chips as the real panel * values we need aren't in the ROM but in the BIOS image in * memory. This is definitely not the best meacnism though, diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 72e12079867..02091eaac0b 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -115,8 +115,8 @@ static struct dentry *__get_xa_root(struct super_block *s) } /* Returns the dentry (or NULL) referring to the root of the extended - * attribute directory tree. If it has already been retreived, it is used. - * Otherwise, we attempt to retreive it from disk. It may also return + * attribute directory tree. If it has already been retrieved, it is used. + * Otherwise, we attempt to retrieve it from disk. It may also return * a pointer-encoded error. */ static inline struct dentry *get_xa_root(struct super_block *s) diff --git a/net/irda/iriap.c b/net/irda/iriap.c index b8bb78af8b8..254f9074690 100644 --- a/net/irda/iriap.c +++ b/net/irda/iriap.c @@ -364,7 +364,7 @@ static void iriap_disconnect_request(struct iriap_cb *self) /* * Function iriap_getvaluebyclass (addr, name, attr) * - * Retreive all values from attribute in all objects with given class + * Retrieve all values from attribute in all objects with given class * name */ int iriap_getvaluebyclass_request(struct iriap_cb *self, diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c index 1fa4c0b801b..4556014f2f0 100644 --- a/scripts/kconfig/util.c +++ b/scripts/kconfig/util.c @@ -101,7 +101,7 @@ void str_printf(struct gstr *gs, const char *fmt, ...) va_end(ap); } -/* Retreive value of growable string */ +/* Retrieve value of growable string */ const char *str_get(struct gstr *gs) { return gs->s; -- cgit v1.2.3-70-g09d2 From f4b09ebc8baa51ec8394c4173e3de9d62b2cc97a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 3 Jan 2006 13:37:51 +0100 Subject: update the email address of Randy Dunlap This patch removes all references to the bouncing address rddunlap@osdl.org and one dead web page from the kernel. Signed-off-by: Adrian Bunk Acked-by: Randy Dunlap --- Documentation/block/biodoc.txt | 2 +- Documentation/scsi/scsi_mid_low_api.txt | 2 +- MAINTAINERS | 3 +-- drivers/usb/class/usblp.c | 2 +- fs/ntfs/ChangeLog | 2 +- kernel/configs.c | 2 +- scripts/binoffset.c | 2 +- scripts/checkversion.pl | 2 +- scripts/patch-kernel | 4 ++-- 9 files changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 0fe01c80548..303c57a7fad 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -31,7 +31,7 @@ The following people helped with review comments and inputs for this document: Christoph Hellwig Arjan van de Ven - Randy Dunlap + Randy Dunlap Andre Hedrick The following people helped with fixes/contributions to the bio patches diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 66565d42288..3209b37e07e 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -1433,7 +1433,7 @@ The following people have contributed to this document: Christoph Hellwig Doug Ledford Andries Brouwer - Randy Dunlap + Randy Dunlap Alan Stern diff --git a/MAINTAINERS b/MAINTAINERS index bbe5f04f59e..79f0efa2977 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1465,7 +1465,6 @@ P: Several L: kernel-janitors@osdl.org W: http://www.kerneljanitors.org/ W: http://sf.net/projects/kernel-janitor/ -W: http://developer.osdl.org/rddunlap/kj-patches/ S: Maintained KERNEL NFSD @@ -1486,7 +1485,7 @@ KEXEC P: Eric Biederman P: Randy Dunlap M: ebiederm@xmission.com -M: rddunlap@osdl.org +M: rdunlap@xenotime.net W: http://www.xmission.com/~ebiederm/files/kexec/ L: linux-kernel@vger.kernel.org L: fastboot@osdl.org diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 357e75335f1..38f905db0d6 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -3,7 +3,7 @@ * * Copyright (c) 1999 Michael Gee * Copyright (c) 1999 Pavel Machek - * Copyright (c) 2000 Randy Dunlap + * Copyright (c) 2000 Randy Dunlap * Copyright (c) 2000 Vojtech Pavlik # Copyright (c) 2001 Pete Zaitcev # Copyright (c) 2001 David Paschal diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog index 50a7749cfca..02f44094bda 100644 --- a/fs/ntfs/ChangeLog +++ b/fs/ntfs/ChangeLog @@ -884,7 +884,7 @@ ToDo/Notes: - Add handling for initialized_size != data_size in compressed files. - Reduce function local stack usage from 0x3d4 bytes to just noise in - fs/ntfs/upcase.c. (Randy Dunlap ) + fs/ntfs/upcase.c. (Randy Dunlap ) - Remove compiler warnings for newer gcc. - Pages are no longer kmapped by mm/filemap.c::generic_file_write() around calls to ->{prepare,commit}_write. Adapt NTFS appropriately diff --git a/kernel/configs.c b/kernel/configs.c index 986f7af31e0..009e1ebdcb8 100644 --- a/kernel/configs.c +++ b/kernel/configs.c @@ -3,7 +3,7 @@ * Echo the kernel .config file used to build the kernel * * Copyright (C) 2002 Khalid Aziz - * Copyright (C) 2002 Randy Dunlap + * Copyright (C) 2002 Randy Dunlap * Copyright (C) 2002 Al Stone * Copyright (C) 2002 Hewlett-Packard Company * diff --git a/scripts/binoffset.c b/scripts/binoffset.c index 591309d8551..1a2e39b8e3e 100644 --- a/scripts/binoffset.c +++ b/scripts/binoffset.c @@ -1,6 +1,6 @@ /*************************************************************************** * binoffset.c - * (C) 2002 Randy Dunlap + * (C) 2002 Randy Dunlap # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by diff --git a/scripts/checkversion.pl b/scripts/checkversion.pl index df10db662eb..9f84e562318 100755 --- a/scripts/checkversion.pl +++ b/scripts/checkversion.pl @@ -3,7 +3,7 @@ # checkversion find uses of LINUX_VERSION_CODE, KERNEL_VERSION, or # UTS_RELEASE without including , or cases of # including that don't need it. -# Copyright (C) 2003, Randy Dunlap +# Copyright (C) 2003, Randy Dunlap $| = 1; diff --git a/scripts/patch-kernel b/scripts/patch-kernel index f2d47ca9c8f..67e4b1868e5 100755 --- a/scripts/patch-kernel +++ b/scripts/patch-kernel @@ -45,7 +45,7 @@ # update usage message; # fix some whitespace damage; # be smarter about stopping when current version is larger than requested; -# Randy Dunlap , 2004-AUG-18. +# Randy Dunlap , 2004-AUG-18. # # Add better support for (non-incremental) 2.6.x.y patches; # If an ending version number if not specified, the script automatically @@ -56,7 +56,7 @@ # patch-kernel does not normally support reverse patching, but does so when # applying EXTRAVERSION (x.y) patches, so that moving from 2.6.11.y to 2.6.11.z # is easy and handled by the script (reverse 2.6.11.y and apply 2.6.11.z). -# Randy Dunlap , 2005-APR-08. +# Randy Dunlap , 2005-APR-08. PNAME=patch-kernel -- cgit v1.2.3-70-g09d2 From a7f5e7f164788a22eb5d3de8e2d3cee1bf58fdca Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 13 Dec 2005 23:25:31 -0800 Subject: [INET]: Generalise tcp_v4_hash_connect Renaming it to inet_hash_connect, making it possible to ditch dccp_v4_hash_connect and share the same code with TCP instead. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- drivers/char/random.c | 6 +- include/linux/random.h | 2 +- include/net/inet_hashtables.h | 3 + net/dccp/ipv4.c | 160 +------------------------------------ net/ipv4/inet_hashtables.c | 178 ++++++++++++++++++++++++++++++++++++++++++ net/ipv4/tcp_ipv4.c | 173 +--------------------------------------- 6 files changed, 186 insertions(+), 336 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 7999da25fe4..79b59d986af 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1554,10 +1554,8 @@ __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, EXPORT_SYMBOL(secure_tcp_sequence_number); - - -/* Generate secure starting point for ephemeral TCP port search */ -u32 secure_tcp_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) +/* Generate secure starting point for ephemeral IPV4 transport port search */ +u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[4]; diff --git a/include/linux/random.h b/include/linux/random.h index 7b2adb3322d..01424a8e621 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -52,7 +52,7 @@ extern void get_random_bytes(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); extern __u32 secure_ip_id(__u32 daddr); -extern u32 secure_tcp_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport); +extern u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport); extern u32 secure_tcpv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dport); extern __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 07840baa934..c83baa79f66 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -434,4 +434,7 @@ static inline struct sock *inet_lookup(struct inet_hashinfo *hashinfo, return sk; } + +extern int inet_hash_connect(struct inet_timewait_death_row *death_row, + struct sock *sk); #endif /* _INET_HASHTABLES_H */ diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index e11cda0cb6b..671fbf3b237 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -54,164 +54,6 @@ void dccp_unhash(struct sock *sk) EXPORT_SYMBOL_GPL(dccp_unhash); -/* called with local bh disabled */ -static int __dccp_v4_check_established(struct sock *sk, const __u16 lport, - struct inet_timewait_sock **twp) -{ - struct inet_sock *inet = inet_sk(sk); - const u32 daddr = inet->rcv_saddr; - const u32 saddr = inet->daddr; - const int dif = sk->sk_bound_dev_if; - INET_ADDR_COOKIE(acookie, saddr, daddr) - const __u32 ports = INET_COMBINED_PORTS(inet->dport, lport); - unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport); - struct inet_ehash_bucket *head = inet_ehash_bucket(&dccp_hashinfo, hash); - const struct sock *sk2; - const struct hlist_node *node; - struct inet_timewait_sock *tw; - - prefetch(head->chain.first); - write_lock(&head->lock); - - /* Check TIME-WAIT sockets first. */ - sk_for_each(sk2, node, &(head + dccp_hashinfo.ehash_size)->chain) { - tw = inet_twsk(sk2); - - if (INET_TW_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) - goto not_unique; - } - tw = NULL; - - /* And established part... */ - sk_for_each(sk2, node, &head->chain) { - if (INET_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) - goto not_unique; - } - - /* Must record num and sport now. Otherwise we will see - * in hash table socket with a funny identity. */ - inet->num = lport; - inet->sport = htons(lport); - sk->sk_hash = hash; - BUG_TRAP(sk_unhashed(sk)); - __sk_add_node(sk, &head->chain); - sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); - - if (twp != NULL) { - *twp = tw; - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - } else if (tw != NULL) { - /* Silly. Should hash-dance instead... */ - inet_twsk_deschedule(tw, &dccp_death_row); - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - - inet_twsk_put(tw); - } - - return 0; - -not_unique: - write_unlock(&head->lock); - return -EADDRNOTAVAIL; -} - -/* - * Bind a port for a connect operation and hash it. - */ -static int dccp_v4_hash_connect(struct sock *sk) -{ - const unsigned short snum = inet_sk(sk)->num; - struct inet_bind_hashbucket *head; - struct inet_bind_bucket *tb; - int ret; - - if (snum == 0) { - int low = sysctl_local_port_range[0]; - int high = sysctl_local_port_range[1]; - int remaining = (high - low) + 1; - int rover = net_random() % (high - low) + low; - struct hlist_node *node; - struct inet_timewait_sock *tw = NULL; - - local_bh_disable(); - do { - head = &dccp_hashinfo.bhash[inet_bhashfn(rover, - dccp_hashinfo.bhash_size)]; - spin_lock(&head->lock); - - /* Does not bother with rcv_saddr checks, - * because the established check is already - * unique enough. - */ - inet_bind_bucket_for_each(tb, node, &head->chain) { - if (tb->port == rover) { - BUG_TRAP(!hlist_empty(&tb->owners)); - if (tb->fastreuse >= 0) - goto next_port; - if (!__dccp_v4_check_established(sk, - rover, - &tw)) - goto ok; - goto next_port; - } - } - - tb = inet_bind_bucket_create(dccp_hashinfo.bind_bucket_cachep, - head, rover); - if (tb == NULL) { - spin_unlock(&head->lock); - break; - } - tb->fastreuse = -1; - goto ok; - - next_port: - spin_unlock(&head->lock); - if (++rover > high) - rover = low; - } while (--remaining > 0); - - local_bh_enable(); - - return -EADDRNOTAVAIL; - -ok: - /* All locks still held and bhs disabled */ - inet_bind_hash(sk, tb, rover); - if (sk_unhashed(sk)) { - inet_sk(sk)->sport = htons(rover); - __inet_hash(&dccp_hashinfo, sk, 0); - } - spin_unlock(&head->lock); - - if (tw != NULL) { - inet_twsk_deschedule(tw, &dccp_death_row); - inet_twsk_put(tw); - } - - ret = 0; - goto out; - } - - head = &dccp_hashinfo.bhash[inet_bhashfn(snum, - dccp_hashinfo.bhash_size)]; - tb = inet_csk(sk)->icsk_bind_hash; - spin_lock_bh(&head->lock); - if (sk_head(&tb->owners) == sk && sk->sk_bind_node.next == NULL) { - __inet_hash(&dccp_hashinfo, sk, 0); - spin_unlock_bh(&head->lock); - return 0; - } else { - spin_unlock(&head->lock); - /* No definite answer... Walk to established hash table */ - ret = __dccp_v4_check_established(sk, snum, NULL); -out: - local_bh_enable(); - return ret; - } -} - int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct inet_sock *inet = inet_sk(sk); @@ -272,7 +114,7 @@ int dccp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) * complete initialization after this. */ dccp_set_state(sk, DCCP_REQUESTING); - err = dccp_v4_hash_connect(sk); + err = inet_hash_connect(&dccp_death_row, sk); if (err != 0) goto failure; diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index e8d29fe736d..33228115cda 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -15,12 +15,14 @@ #include #include +#include #include #include #include #include #include +#include /* * Allocate and initialize a new local port bind bucket. @@ -163,3 +165,179 @@ struct sock *__inet_lookup_listener(const struct hlist_head *head, const u32 dad } EXPORT_SYMBOL_GPL(__inet_lookup_listener); + +/* called with local bh disabled */ +static int __inet_check_established(struct inet_timewait_death_row *death_row, + struct sock *sk, __u16 lport, + struct inet_timewait_sock **twp) +{ + struct inet_hashinfo *hinfo = death_row->hashinfo; + struct inet_sock *inet = inet_sk(sk); + u32 daddr = inet->rcv_saddr; + u32 saddr = inet->daddr; + int dif = sk->sk_bound_dev_if; + INET_ADDR_COOKIE(acookie, saddr, daddr) + const __u32 ports = INET_COMBINED_PORTS(inet->dport, lport); + unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport); + struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); + struct sock *sk2; + const struct hlist_node *node; + struct inet_timewait_sock *tw; + + prefetch(head->chain.first); + write_lock(&head->lock); + + /* Check TIME-WAIT sockets first. */ + sk_for_each(sk2, node, &(head + hinfo->ehash_size)->chain) { + tw = inet_twsk(sk2); + + if (INET_TW_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) { + if (twsk_unique(sk, sk2, twp)) + goto unique; + else + goto not_unique; + } + } + tw = NULL; + + /* And established part... */ + sk_for_each(sk2, node, &head->chain) { + if (INET_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) + goto not_unique; + } + +unique: + /* Must record num and sport now. Otherwise we will see + * in hash table socket with a funny identity. */ + inet->num = lport; + inet->sport = htons(lport); + sk->sk_hash = hash; + BUG_TRAP(sk_unhashed(sk)); + __sk_add_node(sk, &head->chain); + sock_prot_inc_use(sk->sk_prot); + write_unlock(&head->lock); + + if (twp) { + *twp = tw; + NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); + } else if (tw) { + /* Silly. Should hash-dance instead... */ + inet_twsk_deschedule(tw, death_row); + NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); + + inet_twsk_put(tw); + } + + return 0; + +not_unique: + write_unlock(&head->lock); + return -EADDRNOTAVAIL; +} + +static inline u32 inet_sk_port_offset(const struct sock *sk) +{ + const struct inet_sock *inet = inet_sk(sk); + return secure_ipv4_port_ephemeral(inet->rcv_saddr, inet->daddr, + inet->dport); +} + +/* + * Bind a port for a connect operation and hash it. + */ +int inet_hash_connect(struct inet_timewait_death_row *death_row, + struct sock *sk) +{ + struct inet_hashinfo *hinfo = death_row->hashinfo; + const unsigned short snum = inet_sk(sk)->num; + struct inet_bind_hashbucket *head; + struct inet_bind_bucket *tb; + int ret; + + if (!snum) { + int low = sysctl_local_port_range[0]; + int high = sysctl_local_port_range[1]; + int range = high - low; + int i; + int port; + static u32 hint; + u32 offset = hint + inet_sk_port_offset(sk); + struct hlist_node *node; + struct inet_timewait_sock *tw = NULL; + + local_bh_disable(); + for (i = 1; i <= range; i++) { + port = low + (i + offset) % range; + head = &hinfo->bhash[inet_bhashfn(port, hinfo->bhash_size)]; + spin_lock(&head->lock); + + /* Does not bother with rcv_saddr checks, + * because the established check is already + * unique enough. + */ + inet_bind_bucket_for_each(tb, node, &head->chain) { + if (tb->port == port) { + BUG_TRAP(!hlist_empty(&tb->owners)); + if (tb->fastreuse >= 0) + goto next_port; + if (!__inet_check_established(death_row, + sk, port, + &tw)) + goto ok; + goto next_port; + } + } + + tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep, head, port); + if (!tb) { + spin_unlock(&head->lock); + break; + } + tb->fastreuse = -1; + goto ok; + + next_port: + spin_unlock(&head->lock); + } + local_bh_enable(); + + return -EADDRNOTAVAIL; + +ok: + hint += i; + + /* Head lock still held and bh's disabled */ + inet_bind_hash(sk, tb, port); + if (sk_unhashed(sk)) { + inet_sk(sk)->sport = htons(port); + __inet_hash(hinfo, sk, 0); + } + spin_unlock(&head->lock); + + if (tw) { + inet_twsk_deschedule(tw, death_row);; + inet_twsk_put(tw); + } + + ret = 0; + goto out; + } + + head = &hinfo->bhash[inet_bhashfn(snum, hinfo->bhash_size)]; + tb = inet_csk(sk)->icsk_bind_hash; + spin_lock_bh(&head->lock); + if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) { + __inet_hash(hinfo, sk, 0); + spin_unlock_bh(&head->lock); + return 0; + } else { + spin_unlock(&head->lock); + /* No definite answer... Walk to established hash table */ + ret = __inet_check_established(death_row, sk, snum, NULL); +out: + local_bh_enable(); + return ret; + } +} + +EXPORT_SYMBOL_GPL(inet_hash_connect); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 6728772a943..c2fe61becd6 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -152,177 +152,6 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) EXPORT_SYMBOL_GPL(tcp_twsk_unique); -/* called with local bh disabled */ -static int __tcp_v4_check_established(struct sock *sk, __u16 lport, - struct inet_timewait_sock **twp) -{ - struct inet_sock *inet = inet_sk(sk); - u32 daddr = inet->rcv_saddr; - u32 saddr = inet->daddr; - int dif = sk->sk_bound_dev_if; - INET_ADDR_COOKIE(acookie, saddr, daddr) - const __u32 ports = INET_COMBINED_PORTS(inet->dport, lport); - unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport); - struct inet_ehash_bucket *head = inet_ehash_bucket(&tcp_hashinfo, hash); - struct sock *sk2; - const struct hlist_node *node; - struct inet_timewait_sock *tw; - - prefetch(head->chain.first); - write_lock(&head->lock); - - /* Check TIME-WAIT sockets first. */ - sk_for_each(sk2, node, &(head + tcp_hashinfo.ehash_size)->chain) { - tw = inet_twsk(sk2); - - if (INET_TW_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) { - if (twsk_unique(sk, sk2, twp)) - goto unique; - else - goto not_unique; - } - } - tw = NULL; - - /* And established part... */ - sk_for_each(sk2, node, &head->chain) { - if (INET_MATCH(sk2, hash, acookie, saddr, daddr, ports, dif)) - goto not_unique; - } - -unique: - /* Must record num and sport now. Otherwise we will see - * in hash table socket with a funny identity. */ - inet->num = lport; - inet->sport = htons(lport); - sk->sk_hash = hash; - BUG_TRAP(sk_unhashed(sk)); - __sk_add_node(sk, &head->chain); - sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); - - if (twp) { - *twp = tw; - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - } else if (tw) { - /* Silly. Should hash-dance instead... */ - inet_twsk_deschedule(tw, &tcp_death_row); - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - - inet_twsk_put(tw); - } - - return 0; - -not_unique: - write_unlock(&head->lock); - return -EADDRNOTAVAIL; -} - -static inline u32 connect_port_offset(const struct sock *sk) -{ - const struct inet_sock *inet = inet_sk(sk); - - return secure_tcp_port_ephemeral(inet->rcv_saddr, inet->daddr, - inet->dport); -} - -/* - * Bind a port for a connect operation and hash it. - */ -static inline int tcp_v4_hash_connect(struct sock *sk) -{ - const unsigned short snum = inet_sk(sk)->num; - struct inet_bind_hashbucket *head; - struct inet_bind_bucket *tb; - int ret; - - if (!snum) { - int low = sysctl_local_port_range[0]; - int high = sysctl_local_port_range[1]; - int range = high - low; - int i; - int port; - static u32 hint; - u32 offset = hint + connect_port_offset(sk); - struct hlist_node *node; - struct inet_timewait_sock *tw = NULL; - - local_bh_disable(); - for (i = 1; i <= range; i++) { - port = low + (i + offset) % range; - head = &tcp_hashinfo.bhash[inet_bhashfn(port, tcp_hashinfo.bhash_size)]; - spin_lock(&head->lock); - - /* Does not bother with rcv_saddr checks, - * because the established check is already - * unique enough. - */ - inet_bind_bucket_for_each(tb, node, &head->chain) { - if (tb->port == port) { - BUG_TRAP(!hlist_empty(&tb->owners)); - if (tb->fastreuse >= 0) - goto next_port; - if (!__tcp_v4_check_established(sk, - port, - &tw)) - goto ok; - goto next_port; - } - } - - tb = inet_bind_bucket_create(tcp_hashinfo.bind_bucket_cachep, head, port); - if (!tb) { - spin_unlock(&head->lock); - break; - } - tb->fastreuse = -1; - goto ok; - - next_port: - spin_unlock(&head->lock); - } - local_bh_enable(); - - return -EADDRNOTAVAIL; - -ok: - hint += i; - - /* Head lock still held and bh's disabled */ - inet_bind_hash(sk, tb, port); - if (sk_unhashed(sk)) { - inet_sk(sk)->sport = htons(port); - __inet_hash(&tcp_hashinfo, sk, 0); - } - spin_unlock(&head->lock); - - if (tw) { - inet_twsk_deschedule(tw, &tcp_death_row);; - inet_twsk_put(tw); - } - - ret = 0; - goto out; - } - - head = &tcp_hashinfo.bhash[inet_bhashfn(snum, tcp_hashinfo.bhash_size)]; - tb = inet_csk(sk)->icsk_bind_hash; - spin_lock_bh(&head->lock); - if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) { - __inet_hash(&tcp_hashinfo, sk, 0); - spin_unlock_bh(&head->lock); - return 0; - } else { - spin_unlock(&head->lock); - /* No definite answer... Walk to established hash table */ - ret = __tcp_v4_check_established(sk, snum, NULL); -out: - local_bh_enable(); - return ret; - } -} - /* This will initiate an outgoing connection. */ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { @@ -403,7 +232,7 @@ int tcp_v4_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) * complete initialization after this. */ tcp_set_state(sk, TCP_SYN_SENT); - err = tcp_v4_hash_connect(sk); + err = inet_hash_connect(&tcp_death_row, sk); if (err) goto failure; -- cgit v1.2.3-70-g09d2 From d8313f5ca2b1f86b7df6c99fc4b3fffa1f84e92b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 13 Dec 2005 23:25:44 -0800 Subject: [INET6]: Generalise tcp_v6_hash_connect Renaming it to inet6_hash_connect, making it possible to ditch dccp_v6_hash_connect and share the same code with TCP instead. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- drivers/char/random.c | 4 +- include/linux/random.h | 4 +- include/net/ipv6.h | 3 + net/dccp/ipv6.c | 171 +---------------------------------------- net/ipv6/inet6_hashtables.c | 183 +++++++++++++++++++++++++++++++++++++++++++- net/ipv6/tcp_ipv6.c | 173 +---------------------------------------- 6 files changed, 190 insertions(+), 348 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 79b59d986af..bdfdfd28594 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1573,7 +1573,7 @@ u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -u32 secure_tcpv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dport) +u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[12]; @@ -1584,7 +1584,7 @@ u32 secure_tcpv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dp return twothirdsMD4Transform(daddr, hash); } -EXPORT_SYMBOL(secure_tcpv6_port_ephemeral); +EXPORT_SYMBOL(secure_ipv6_port_ephemeral); #endif #if defined(CONFIG_IP_DCCP) || defined(CONFIG_IP_DCCP_MODULE) diff --git a/include/linux/random.h b/include/linux/random.h index 01424a8e621..5d6456bcdeb 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -53,8 +53,8 @@ void generate_random_uuid(unsigned char uuid_out[16]); extern __u32 secure_ip_id(__u32 daddr); extern u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport); -extern u32 secure_tcpv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, - __u16 dport); +extern u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, + __u16 dport); extern __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, __u16 sport, __u16 dport); extern __u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr, diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 851376108ac..e3d5d7bc883 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -527,6 +527,9 @@ extern int inet6_getname(struct socket *sock, struct sockaddr *uaddr, extern int inet6_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); +extern int inet6_hash_connect(struct inet_timewait_death_row *death_row, + struct sock *sk); + /* * reassembly.c */ diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 4d078f5b911..71bf04eb21e 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -84,175 +84,6 @@ static __u32 dccp_v6_init_sequence(struct sock *sk, struct sk_buff *skb) dh->dccph_sport); } -static int __dccp_v6_check_established(struct sock *sk, const __u16 lport, - struct inet_timewait_sock **twp) -{ - struct inet_sock *inet = inet_sk(sk); - const struct ipv6_pinfo *np = inet6_sk(sk); - const struct in6_addr *daddr = &np->rcv_saddr; - const struct in6_addr *saddr = &np->daddr; - const int dif = sk->sk_bound_dev_if; - const u32 ports = INET_COMBINED_PORTS(inet->dport, lport); - const unsigned int hash = inet6_ehashfn(daddr, inet->num, - saddr, inet->dport); - struct inet_ehash_bucket *head = inet_ehash_bucket(&dccp_hashinfo, hash); - struct sock *sk2; - const struct hlist_node *node; - struct inet_timewait_sock *tw; - - prefetch(head->chain.first); - write_lock(&head->lock); - - /* Check TIME-WAIT sockets first. */ - sk_for_each(sk2, node, &(head + dccp_hashinfo.ehash_size)->chain) { - const struct inet6_timewait_sock *tw6 = inet6_twsk(sk2); - - tw = inet_twsk(sk2); - - if(*((__u32 *)&(tw->tw_dport)) == ports && - sk2->sk_family == PF_INET6 && - ipv6_addr_equal(&tw6->tw_v6_daddr, saddr) && - ipv6_addr_equal(&tw6->tw_v6_rcv_saddr, daddr) && - sk2->sk_bound_dev_if == sk->sk_bound_dev_if) - goto not_unique; - } - tw = NULL; - - /* And established part... */ - sk_for_each(sk2, node, &head->chain) { - if (INET6_MATCH(sk2, hash, saddr, daddr, ports, dif)) - goto not_unique; - } - - BUG_TRAP(sk_unhashed(sk)); - __sk_add_node(sk, &head->chain); - sk->sk_hash = hash; - sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); - - if (twp) { - *twp = tw; - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - } else if (tw) { - /* Silly. Should hash-dance instead... */ - inet_twsk_deschedule(tw, &dccp_death_row); - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - - inet_twsk_put(tw); - } - return 0; - -not_unique: - write_unlock(&head->lock); - return -EADDRNOTAVAIL; -} - -static inline u32 dccp_v6_port_offset(const struct sock *sk) -{ - const struct inet_sock *inet = inet_sk(sk); - const struct ipv6_pinfo *np = inet6_sk(sk); - - return secure_tcpv6_port_ephemeral(np->rcv_saddr.s6_addr32, - np->daddr.s6_addr32, - inet->dport); -} - -static int dccp_v6_hash_connect(struct sock *sk) -{ - const unsigned short snum = inet_sk(sk)->num; - struct inet_bind_hashbucket *head; - struct inet_bind_bucket *tb; - int ret; - - if (snum == 0) { - int low = sysctl_local_port_range[0]; - int high = sysctl_local_port_range[1]; - int range = high - low; - int i; - int port; - static u32 hint; - u32 offset = hint + dccp_v6_port_offset(sk); - struct hlist_node *node; - struct inet_timewait_sock *tw = NULL; - - local_bh_disable(); - for (i = 1; i <= range; i++) { - port = low + (i + offset) % range; - head = &dccp_hashinfo.bhash[inet_bhashfn(port, - dccp_hashinfo.bhash_size)]; - spin_lock(&head->lock); - - /* Does not bother with rcv_saddr checks, - * because the established check is already - * unique enough. - */ - inet_bind_bucket_for_each(tb, node, &head->chain) { - if (tb->port == port) { - BUG_TRAP(!hlist_empty(&tb->owners)); - if (tb->fastreuse >= 0) - goto next_port; - if (!__dccp_v6_check_established(sk, - port, - &tw)) - goto ok; - goto next_port; - } - } - - tb = inet_bind_bucket_create(dccp_hashinfo.bind_bucket_cachep, - head, port); - if (!tb) { - spin_unlock(&head->lock); - break; - } - tb->fastreuse = -1; - goto ok; - - next_port: - spin_unlock(&head->lock); - } - local_bh_enable(); - - return -EADDRNOTAVAIL; -ok: - hint += i; - - /* Head lock still held and bh's disabled */ - inet_bind_hash(sk, tb, port); - if (sk_unhashed(sk)) { - inet_sk(sk)->sport = htons(port); - __inet6_hash(&dccp_hashinfo, sk); - } - spin_unlock(&head->lock); - - if (tw) { - inet_twsk_deschedule(tw, &dccp_death_row); - inet_twsk_put(tw); - } - - ret = 0; - goto out; - } - - head = &dccp_hashinfo.bhash[inet_bhashfn(snum, - dccp_hashinfo.bhash_size)]; - tb = inet_csk(sk)->icsk_bind_hash; - spin_lock_bh(&head->lock); - - if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) { - __inet6_hash(&dccp_hashinfo, sk); - spin_unlock_bh(&head->lock); - return 0; - } else { - spin_unlock(&head->lock); - /* No definite answer... Walk to established hash table */ - ret = __dccp_v6_check_established(sk, snum, NULL); -out: - local_bh_enable(); - return ret; - } -} - static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { @@ -403,7 +234,7 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr, inet->dport = usin->sin6_port; dccp_set_state(sk, DCCP_REQUESTING); - err = dccp_v6_hash_connect(sk); + err = inet6_hash_connect(&dccp_death_row, sk); if (err) goto late_failure; /* FIXME */ diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c index 01d5f46d4e4..4154f3a8b6c 100644 --- a/net/ipv6/inet6_hashtables.c +++ b/net/ipv6/inet6_hashtables.c @@ -5,7 +5,8 @@ * * Generic INET6 transport hashtables * - * Authors: Lotsa people, from code originally in tcp + * Authors: Lotsa people, from code originally in tcp, generalised here + * by Arnaldo Carvalho de Melo * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,12 +15,13 @@ */ #include - #include +#include #include #include #include +#include struct sock *inet6_lookup_listener(struct inet_hashinfo *hashinfo, const struct in6_addr *daddr, @@ -79,3 +81,180 @@ struct sock *inet6_lookup(struct inet_hashinfo *hashinfo, } EXPORT_SYMBOL_GPL(inet6_lookup); + +static int __inet6_check_established(struct inet_timewait_death_row *death_row, + struct sock *sk, const __u16 lport, + struct inet_timewait_sock **twp) +{ + struct inet_hashinfo *hinfo = death_row->hashinfo; + const struct inet_sock *inet = inet_sk(sk); + const struct ipv6_pinfo *np = inet6_sk(sk); + const struct in6_addr *daddr = &np->rcv_saddr; + const struct in6_addr *saddr = &np->daddr; + const int dif = sk->sk_bound_dev_if; + const u32 ports = INET_COMBINED_PORTS(inet->dport, lport); + const unsigned int hash = inet6_ehashfn(daddr, inet->num, saddr, + inet->dport); + struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash); + struct sock *sk2; + const struct hlist_node *node; + struct inet_timewait_sock *tw; + + prefetch(head->chain.first); + write_lock(&head->lock); + + /* Check TIME-WAIT sockets first. */ + sk_for_each(sk2, node, &(head + hinfo->ehash_size)->chain) { + const struct inet6_timewait_sock *tw6 = inet6_twsk(sk2); + + tw = inet_twsk(sk2); + + if(*((__u32 *)&(tw->tw_dport)) == ports && + sk2->sk_family == PF_INET6 && + ipv6_addr_equal(&tw6->tw_v6_daddr, saddr) && + ipv6_addr_equal(&tw6->tw_v6_rcv_saddr, daddr) && + sk2->sk_bound_dev_if == sk->sk_bound_dev_if) { + if (twsk_unique(sk, sk2, twp)) + goto unique; + else + goto not_unique; + } + } + tw = NULL; + + /* And established part... */ + sk_for_each(sk2, node, &head->chain) { + if (INET6_MATCH(sk2, hash, saddr, daddr, ports, dif)) + goto not_unique; + } + +unique: + BUG_TRAP(sk_unhashed(sk)); + __sk_add_node(sk, &head->chain); + sk->sk_hash = hash; + sock_prot_inc_use(sk->sk_prot); + write_unlock(&head->lock); + + if (twp != NULL) { + *twp = tw; + NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); + } else if (tw != NULL) { + /* Silly. Should hash-dance instead... */ + inet_twsk_deschedule(tw, death_row); + NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); + + inet_twsk_put(tw); + } + return 0; + +not_unique: + write_unlock(&head->lock); + return -EADDRNOTAVAIL; +} + +static inline u32 inet6_sk_port_offset(const struct sock *sk) +{ + const struct inet_sock *inet = inet_sk(sk); + const struct ipv6_pinfo *np = inet6_sk(sk); + return secure_ipv6_port_ephemeral(np->rcv_saddr.s6_addr32, + np->daddr.s6_addr32, + inet->dport); +} + +int inet6_hash_connect(struct inet_timewait_death_row *death_row, + struct sock *sk) +{ + struct inet_hashinfo *hinfo = death_row->hashinfo; + const unsigned short snum = inet_sk(sk)->num; + struct inet_bind_hashbucket *head; + struct inet_bind_bucket *tb; + int ret; + + if (snum == 0) { + const int low = sysctl_local_port_range[0]; + const int high = sysctl_local_port_range[1]; + const int range = high - low; + int i, port; + static u32 hint; + const u32 offset = hint + inet6_sk_port_offset(sk); + struct hlist_node *node; + struct inet_timewait_sock *tw = NULL; + + local_bh_disable(); + for (i = 1; i <= range; i++) { + port = low + (i + offset) % range; + head = &hinfo->bhash[inet_bhashfn(port, hinfo->bhash_size)]; + spin_lock(&head->lock); + + /* Does not bother with rcv_saddr checks, + * because the established check is already + * unique enough. + */ + inet_bind_bucket_for_each(tb, node, &head->chain) { + if (tb->port == port) { + BUG_TRAP(!hlist_empty(&tb->owners)); + if (tb->fastreuse >= 0) + goto next_port; + if (!__inet6_check_established(death_row, + sk, port, + &tw)) + goto ok; + goto next_port; + } + } + + tb = inet_bind_bucket_create(hinfo->bind_bucket_cachep, + head, port); + if (!tb) { + spin_unlock(&head->lock); + break; + } + tb->fastreuse = -1; + goto ok; + + next_port: + spin_unlock(&head->lock); + } + local_bh_enable(); + + return -EADDRNOTAVAIL; + +ok: + hint += i; + + /* Head lock still held and bh's disabled */ + inet_bind_hash(sk, tb, port); + if (sk_unhashed(sk)) { + inet_sk(sk)->sport = htons(port); + __inet6_hash(hinfo, sk); + } + spin_unlock(&head->lock); + + if (tw) { + inet_twsk_deschedule(tw, death_row); + inet_twsk_put(tw); + } + + ret = 0; + goto out; + } + + head = &hinfo->bhash[inet_bhashfn(snum, hinfo->bhash_size)]; + tb = inet_csk(sk)->icsk_bind_hash; + spin_lock_bh(&head->lock); + + if (sk_head(&tb->owners) == sk && sk->sk_bind_node.next == NULL) { + __inet6_hash(hinfo, sk); + spin_unlock_bh(&head->lock); + return 0; + } else { + spin_unlock(&head->lock); + /* No definite answer... Walk to established hash table */ + ret = __inet6_check_established(death_row, sk, snum, NULL); +out: + local_bh_enable(); + return ret; + } +} + +EXPORT_SYMBOL_GPL(inet6_hash_connect); diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 514b57bb80b..a682eb9093e 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -119,177 +119,6 @@ static __u32 tcp_v6_init_sequence(struct sock *sk, struct sk_buff *skb) } } -static int __tcp_v6_check_established(struct sock *sk, const __u16 lport, - struct inet_timewait_sock **twp) -{ - struct inet_sock *inet = inet_sk(sk); - const struct ipv6_pinfo *np = inet6_sk(sk); - const struct in6_addr *daddr = &np->rcv_saddr; - const struct in6_addr *saddr = &np->daddr; - const int dif = sk->sk_bound_dev_if; - const u32 ports = INET_COMBINED_PORTS(inet->dport, lport); - unsigned int hash = inet6_ehashfn(daddr, inet->num, saddr, inet->dport); - struct inet_ehash_bucket *head = inet_ehash_bucket(&tcp_hashinfo, hash); - struct sock *sk2; - const struct hlist_node *node; - struct inet_timewait_sock *tw; - - prefetch(head->chain.first); - write_lock(&head->lock); - - /* Check TIME-WAIT sockets first. */ - sk_for_each(sk2, node, &(head + tcp_hashinfo.ehash_size)->chain) { - const struct inet6_timewait_sock *tw6 = inet6_twsk(sk2); - - tw = inet_twsk(sk2); - - if(*((__u32 *)&(tw->tw_dport)) == ports && - sk2->sk_family == PF_INET6 && - ipv6_addr_equal(&tw6->tw_v6_daddr, saddr) && - ipv6_addr_equal(&tw6->tw_v6_rcv_saddr, daddr) && - sk2->sk_bound_dev_if == sk->sk_bound_dev_if) { - if (twsk_unique(sk, sk2, twp)) - goto unique; - else - goto not_unique; - } - } - tw = NULL; - - /* And established part... */ - sk_for_each(sk2, node, &head->chain) { - if (INET6_MATCH(sk2, hash, saddr, daddr, ports, dif)) - goto not_unique; - } - -unique: - BUG_TRAP(sk_unhashed(sk)); - __sk_add_node(sk, &head->chain); - sk->sk_hash = hash; - sock_prot_inc_use(sk->sk_prot); - write_unlock(&head->lock); - - if (twp) { - *twp = tw; - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - } else if (tw) { - /* Silly. Should hash-dance instead... */ - inet_twsk_deschedule(tw, &tcp_death_row); - NET_INC_STATS_BH(LINUX_MIB_TIMEWAITRECYCLED); - - inet_twsk_put(tw); - } - return 0; - -not_unique: - write_unlock(&head->lock); - return -EADDRNOTAVAIL; -} - -static inline u32 tcpv6_port_offset(const struct sock *sk) -{ - const struct inet_sock *inet = inet_sk(sk); - const struct ipv6_pinfo *np = inet6_sk(sk); - - return secure_tcpv6_port_ephemeral(np->rcv_saddr.s6_addr32, - np->daddr.s6_addr32, - inet->dport); -} - -static int tcp_v6_hash_connect(struct sock *sk) -{ - unsigned short snum = inet_sk(sk)->num; - struct inet_bind_hashbucket *head; - struct inet_bind_bucket *tb; - int ret; - - if (!snum) { - int low = sysctl_local_port_range[0]; - int high = sysctl_local_port_range[1]; - int range = high - low; - int i; - int port; - static u32 hint; - u32 offset = hint + tcpv6_port_offset(sk); - struct hlist_node *node; - struct inet_timewait_sock *tw = NULL; - - local_bh_disable(); - for (i = 1; i <= range; i++) { - port = low + (i + offset) % range; - head = &tcp_hashinfo.bhash[inet_bhashfn(port, tcp_hashinfo.bhash_size)]; - spin_lock(&head->lock); - - /* Does not bother with rcv_saddr checks, - * because the established check is already - * unique enough. - */ - inet_bind_bucket_for_each(tb, node, &head->chain) { - if (tb->port == port) { - BUG_TRAP(!hlist_empty(&tb->owners)); - if (tb->fastreuse >= 0) - goto next_port; - if (!__tcp_v6_check_established(sk, - port, - &tw)) - goto ok; - goto next_port; - } - } - - tb = inet_bind_bucket_create(tcp_hashinfo.bind_bucket_cachep, head, port); - if (!tb) { - spin_unlock(&head->lock); - break; - } - tb->fastreuse = -1; - goto ok; - - next_port: - spin_unlock(&head->lock); - } - local_bh_enable(); - - return -EADDRNOTAVAIL; - -ok: - hint += i; - - /* Head lock still held and bh's disabled */ - inet_bind_hash(sk, tb, port); - if (sk_unhashed(sk)) { - inet_sk(sk)->sport = htons(port); - __inet6_hash(&tcp_hashinfo, sk); - } - spin_unlock(&head->lock); - - if (tw) { - inet_twsk_deschedule(tw, &tcp_death_row); - inet_twsk_put(tw); - } - - ret = 0; - goto out; - } - - head = &tcp_hashinfo.bhash[inet_bhashfn(snum, tcp_hashinfo.bhash_size)]; - tb = inet_csk(sk)->icsk_bind_hash; - spin_lock_bh(&head->lock); - - if (sk_head(&tb->owners) == sk && !sk->sk_bind_node.next) { - __inet6_hash(&tcp_hashinfo, sk); - spin_unlock_bh(&head->lock); - return 0; - } else { - spin_unlock(&head->lock); - /* No definite answer... Walk to established hash table */ - ret = __tcp_v6_check_established(sk, snum, NULL); -out: - local_bh_enable(); - return ret; - } -} - static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { @@ -450,7 +279,7 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr, inet->dport = usin->sin6_port; tcp_set_state(sk, TCP_SYN_SENT); - err = tcp_v6_hash_connect(sk); + err = inet6_hash_connect(&tcp_death_row, sk); if (err) goto late_failure; -- cgit v1.2.3-70-g09d2 From 25995ff577675b58dbd848b7758e7bad87411947 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 27 Dec 2005 02:42:22 -0200 Subject: [SOCK]: Introduce sk_receive_skb Its common enough to to justify that, TCP still can't use it as it has the prequeueing stuff, still to be made generic in the not so distant future :-) Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 22 ++-------------------- include/net/sock.h | 23 +++++++++++++++++++++++ net/dccp/ipv4.c | 23 ++--------------------- net/dccp/ipv6.c | 17 +---------------- net/decnet/dn_nsp_in.c | 17 +---------------- 5 files changed, 29 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index a842ecc60a3..71e303b2864 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -383,8 +383,6 @@ static int pppoe_rcv(struct sk_buff *skb, { struct pppoe_hdr *ph; struct pppox_sock *po; - struct sock *sk; - int ret; if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) goto drop; @@ -395,24 +393,8 @@ static int pppoe_rcv(struct sk_buff *skb, ph = (struct pppoe_hdr *) skb->nh.raw; po = get_item((unsigned long) ph->sid, eth_hdr(skb)->h_source); - if (!po) - goto drop; - - sk = sk_pppox(po); - bh_lock_sock(sk); - - /* Socket state is unknown, must put skb into backlog. */ - if (sock_owned_by_user(sk) != 0) { - sk_add_backlog(sk, skb); - ret = NET_RX_SUCCESS; - } else { - ret = pppoe_rcv_core(sk, skb); - } - - bh_unlock_sock(sk); - sock_put(sk); - - return ret; + if (po != NULL) + return sk_receive_skb(sk_pppox(po), skb); drop: kfree_skb(skb); out: diff --git a/include/net/sock.h b/include/net/sock.h index 91d28957dc1..6961700ff3a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -926,6 +926,29 @@ static inline void sock_put(struct sock *sk) sk_free(sk); } +static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb) +{ + int rc = NET_RX_SUCCESS; + + if (sk_filter(sk, skb, 0)) + goto discard_and_relse; + + skb->dev = NULL; + + bh_lock_sock(sk); + if (!sock_owned_by_user(sk)) + rc = sk->sk_backlog_rcv(sk, skb); + else + sk_add_backlog(sk, skb); + bh_unlock_sock(sk); +out: + sock_put(sk); + return rc; +discard_and_relse: + kfree_skb(skb); + goto out; +} + /* Detach socket from process context. * Announce socket dead, detach it from wait queue and inode. * Note that parent inode held reference count on this struct sock, diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index c363051a7f1..99e8afa7ba1 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -914,7 +914,6 @@ int dccp_v4_rcv(struct sk_buff *skb) { const struct dccp_hdr *dh; struct sock *sk; - int rc; /* Step 1: Check header basics: */ @@ -984,28 +983,10 @@ int dccp_v4_rcv(struct sk_buff *skb) goto do_time_wait; } - if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb)) { - dccp_pr_debug("xfrm4_policy_check failed\n"); + if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; - } - - if (sk_filter(sk, skb, 0)) { - dccp_pr_debug("sk_filter failed\n"); - goto discard_and_relse; - } - - skb->dev = NULL; - bh_lock_sock(sk); - rc = 0; - if (!sock_owned_by_user(sk)) - rc = dccp_v4_do_rcv(sk, skb); - else - sk_add_backlog(sk, skb); - bh_unlock_sock(sk); - - sock_put(sk); - return rc; + return sk_receive_skb(sk, skb); no_dccp_socket: if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 599b0be2151..2e194c8f995 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1032,7 +1032,6 @@ static int dccp_v6_rcv(struct sk_buff **pskb, unsigned int *nhoffp) const struct dccp_hdr *dh; struct sk_buff *skb = *pskb; struct sock *sk; - int rc; /* Step 1: Check header basics: */ @@ -1077,21 +1076,7 @@ static int dccp_v6_rcv(struct sk_buff **pskb, unsigned int *nhoffp) if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; - if (sk_filter(sk, skb, 0)) - goto discard_and_relse; - - skb->dev = NULL; - - bh_lock_sock(sk); - rc = 0; - if (!sock_owned_by_user(sk)) - rc = dccp_v6_do_rcv(sk, skb); - else - sk_add_backlog(sk, skb); - bh_unlock_sock(sk); - - sock_put(sk); - return rc ? -1 : 0; + return sk_receive_skb(sk, skb) ? -1 : 0; no_dccp_socket: if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c index 369f25b60f3..44bda85e678 100644 --- a/net/decnet/dn_nsp_in.c +++ b/net/decnet/dn_nsp_in.c @@ -793,7 +793,6 @@ static int dn_nsp_rx_packet(struct sk_buff *skb) got_it: if (sk != NULL) { struct dn_scp *scp = DN_SK(sk); - int ret; /* Reset backoff */ scp->nsp_rxtshift = 0; @@ -807,21 +806,7 @@ got_it: goto free_out; } - bh_lock_sock(sk); - ret = NET_RX_SUCCESS; - if (decnet_debug_level & 8) - printk(KERN_DEBUG "NSP: 0x%02x 0x%02x 0x%04x 0x%04x %d\n", - (int)cb->rt_flags, (int)cb->nsp_flags, - (int)cb->src_port, (int)cb->dst_port, - !!sock_owned_by_user(sk)); - if (!sock_owned_by_user(sk)) - ret = dn_nsp_backlog_rcv(sk, skb); - else - sk_add_backlog(sk, skb); - bh_unlock_sock(sk); - sock_put(sk); - - return ret; + return sk_receive_skb(sk, skb); } return dn_nsp_no_socket(skb, reason); -- cgit v1.2.3-70-g09d2 From 14c850212ed8f8cbb5972ad6b8812e08a0bc901c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 27 Dec 2005 02:43:12 -0200 Subject: [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 + drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 + drivers/net/ns83820.c | 1 + drivers/net/sk98lin/skge.c | 1 + drivers/net/skge.c | 1 + drivers/net/tg3.c | 1 + fs/9p/trans_sock.c | 1 + fs/nfs/callback.c | 3 + include/linux/dccp.h | 3 +- include/linux/ip.h | 126 +--------------- include/linux/ipv6.h | 7 +- include/linux/udp.h | 6 +- include/net/atmclip.h | 2 +- include/net/dst.h | 1 + include/net/icmp.h | 9 +- include/net/ieee80211_crypt.h | 9 +- include/net/inet_connection_sock.h | 3 +- include/net/inet_ecn.h | 2 + include/net/inet_hashtables.h | 21 +-- include/net/inet_sock.h | 193 +++++++++++++++++++++++++ include/net/inet_timewait_sock.h | 2 +- include/net/ip.h | 17 ++- include/net/ip_fib.h | 2 + include/net/ip_vs.h | 12 +- include/net/ipv6.h | 3 + include/net/ndisc.h | 17 ++- include/net/neighbour.h | 2 +- include/net/pkt_act.h | 1 - include/net/raw.h | 2 + include/net/udp.h | 4 +- include/net/xfrm.h | 3 +- net/bridge/br_netfilter.c | 4 + net/bridge/netfilter/ebt_log.c | 1 + net/core/netpoll.c | 1 + net/dccp/ccid.h | 2 + net/dccp/ipv4.c | 1 + net/dccp/ipv6.c | 1 + net/dccp/output.c | 1 + net/dccp/proto.c | 3 +- net/econet/af_econet.c | 1 + net/ipv4/af_inet.c | 1 + net/ipv4/ah4.c | 1 + net/ipv4/arp.c | 1 + net/ipv4/devinet.c | 1 + net/ipv4/esp4.c | 1 + net/ipv4/fib_frontend.c | 1 + net/ipv4/fib_hash.c | 1 + net/ipv4/fib_rules.c | 1 + net/ipv4/fib_semantics.c | 2 + net/ipv4/icmp.c | 1 + net/ipv4/igmp.c | 2 + net/ipv4/ip_input.c | 1 + net/ipv4/ip_options.c | 1 + net/ipv4/ip_sockglue.c | 1 + net/ipv4/ipcomp.c | 1 + net/ipv4/ipconfig.c | 2 + net/ipv4/ipmr.c | 1 + net/ipv4/ipvs/ip_vs_conn.c | 2 + net/ipv4/ipvs/ip_vs_ctl.c | 1 + net/ipv4/ipvs/ip_vs_dh.c | 2 + net/ipv4/ipvs/ip_vs_est.c | 3 + net/ipv4/ipvs/ip_vs_lblc.c | 2 + net/ipv4/ipvs/ip_vs_lblcr.c | 2 + net/ipv4/ipvs/ip_vs_proto_ah.c | 2 + net/ipv4/ipvs/ip_vs_proto_esp.c | 2 + net/ipv4/ipvs/ip_vs_proto_udp.c | 3 + net/ipv4/ipvs/ip_vs_sh.c | 2 + net/ipv4/ipvs/ip_vs_sync.c | 2 + net/ipv4/netfilter/ip_conntrack_amanda.c | 2 + net/ipv4/netfilter/ip_conntrack_proto_gre.c | 1 + net/ipv4/netfilter/ip_conntrack_proto_udp.c | 1 + net/ipv4/netfilter/ip_conntrack_standalone.c | 1 + net/ipv4/netfilter/ip_nat_snmp_basic.c | 2 + net/ipv4/netfilter/ipt_MASQUERADE.c | 2 + net/ipv4/netfilter/ipt_physdev.c | 1 + net/ipv4/proc.c | 1 + net/ipv4/sysctl_net_ipv4.c | 1 + net/ipv4/udp.c | 1 + net/ipv6/ah6.c | 1 + net/ipv6/esp6.c | 1 + net/ipv6/ipcomp6.c | 1 + net/ipv6/netfilter/ip6_tables.c | 1 + net/ipv6/netfilter/ip6t_LOG.c | 1 + net/ipv6/netfilter/ip6t_ah.c | 1 + net/ipv6/netfilter/ip6t_esp.c | 1 + net/sched/sch_teql.c | 1 + net/sctp/protocol.c | 1 + 87 files changed, 355 insertions(+), 184 deletions(-) create mode 100644 include/net/inet_sock.h (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 475d98fa9e2..780009c7eaa 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -47,6 +47,8 @@ #include #include +#include + MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("IP-over-InfiniBand net driver"); MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index ef3ee035bbc..ed0c2ead8bc 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -43,6 +43,8 @@ #include #include +#include + #include "ipoib.h" #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index f857ae94d26..b0c3b6ab626 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -115,6 +115,7 @@ #include #include #include +#include #include #include diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index ae734393475..e1a2d52cc1f 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -107,6 +107,7 @@ #include "h/skversion.h" +#include #include #include #include diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 00d683063c0..d8cc3aea032 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -25,6 +25,7 @@ */ #include +#include #include #include #include diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2fc9893d69e..59d916ccc81 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/fs/9p/trans_sock.c b/fs/9p/trans_sock.c index a93c2bf94c3..6a9a75d40f7 100644 --- a/fs/9p/trans_sock.c +++ b/fs/9p/trans_sock.c @@ -26,6 +26,7 @@ */ #include +#include #include #include #include diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c index f2ca782aba3..30cae360286 100644 --- a/fs/nfs/callback.c +++ b/fs/nfs/callback.c @@ -14,6 +14,9 @@ #include #include #include + +#include + #include "nfs4_fs.h" #include "callback.h" diff --git a/include/linux/dccp.h b/include/linux/dccp.h index d0bdb499cf8..088529f5496 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -192,10 +192,9 @@ enum { #include #include +#include #include -#include #include -#include enum dccp_state { DCCP_OPEN = TCP_ESTABLISHED, diff --git a/include/linux/ip.h b/include/linux/ip.h index 6ccc596c19c..9e2eb9a602e 100644 --- a/include/linux/ip.h +++ b/include/linux/ip.h @@ -16,6 +16,7 @@ */ #ifndef _LINUX_IP_H #define _LINUX_IP_H +#include #include #define IPTOS_TOS_MASK 0x1E @@ -78,131 +79,6 @@ #define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ #define IPOPT_TS_PRESPEC 3 /* specified modules only */ -#ifdef __KERNEL__ -#include -#include -#include -#include -#include -#include - -struct ip_options { - __u32 faddr; /* Saved first hop address */ - unsigned char optlen; - unsigned char srr; - unsigned char rr; - unsigned char ts; - unsigned char is_setbyuser:1, /* Set by setsockopt? */ - is_data:1, /* Options in __data, rather than skb */ - is_strictroute:1, /* Strict source route */ - srr_is_hit:1, /* Packet destination addr was our one */ - is_changed:1, /* IP checksum more not valid */ - rr_needaddr:1, /* Need to record addr of outgoing dev */ - ts_needtime:1, /* Need to record timestamp */ - ts_needaddr:1; /* Need to record addr of outgoing dev */ - unsigned char router_alert; - unsigned char __pad1; - unsigned char __pad2; - unsigned char __data[0]; -}; - -#define optlength(opt) (sizeof(struct ip_options) + opt->optlen) - -struct inet_request_sock { - struct request_sock req; -#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) - u16 inet6_rsk_offset; - /* 2 bytes hole, try to pack */ -#endif - u32 loc_addr; - u32 rmt_addr; - u16 rmt_port; - u16 snd_wscale : 4, - rcv_wscale : 4, - tstamp_ok : 1, - sack_ok : 1, - wscale_ok : 1, - ecn_ok : 1, - acked : 1; - struct ip_options *opt; -}; - -static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk) -{ - return (struct inet_request_sock *)sk; -} - -struct ipv6_pinfo; - -struct inet_sock { - /* sk and pinet6 has to be the first two members of inet_sock */ - struct sock sk; -#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) - struct ipv6_pinfo *pinet6; -#endif - /* Socket demultiplex comparisons on incoming packets. */ - __u32 daddr; /* Foreign IPv4 addr */ - __u32 rcv_saddr; /* Bound local IPv4 addr */ - __u16 dport; /* Destination port */ - __u16 num; /* Local port */ - __u32 saddr; /* Sending source */ - __s16 uc_ttl; /* Unicast TTL */ - __u16 cmsg_flags; - struct ip_options *opt; - __u16 sport; /* Source port */ - __u16 id; /* ID counter for DF pkts */ - __u8 tos; /* TOS */ - __u8 mc_ttl; /* Multicasting TTL */ - __u8 pmtudisc; - unsigned recverr : 1, - is_icsk : 1, /* inet_connection_sock? */ - freebind : 1, - hdrincl : 1, - mc_loop : 1; - int mc_index; /* Multicast device index */ - __u32 mc_addr; - struct ip_mc_socklist *mc_list; /* Group array */ - /* - * Following members are used to retain the infomation to build - * an ip header on each ip fragmentation while the socket is corked. - */ - struct { - unsigned int flags; - unsigned int fragsize; - struct ip_options *opt; - struct rtable *rt; - int length; /* Total length of all frames */ - u32 addr; - struct flowi fl; - } cork; -}; - -#define IPCORK_OPT 1 /* ip-options has been held in ipcork.opt */ -#define IPCORK_ALLFRAG 2 /* always fragment (for ipv6 for now) */ - -static inline struct inet_sock *inet_sk(const struct sock *sk) -{ - return (struct inet_sock *)sk; -} - -static inline void __inet_sk_copy_descendant(struct sock *sk_to, - const struct sock *sk_from, - const int ancestor_size) -{ - memcpy(inet_sk(sk_to) + 1, inet_sk(sk_from) + 1, - sk_from->sk_prot->obj_size - ancestor_size); -} -#if !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) -static inline void inet_sk_copy_descendant(struct sock *sk_to, - const struct sock *sk_from) -{ - __inet_sk_copy_descendant(sk_to, sk_from, sizeof(struct inet_sock)); -} -#endif -#endif - -extern int inet_sk_rebuild_header(struct sock *sk); - struct iphdr { #if defined(__LITTLE_ENDIAN_BITFIELD) __u8 ihl:4, diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index a0d04891fe1..93bbed5c6cf 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -171,12 +171,13 @@ enum { }; #ifdef __KERNEL__ -#include /* struct sockaddr_in6 */ #include -#include /* struct ipv6_mc_socklist */ #include #include +#include /* struct ipv6_mc_socklist */ +#include + /* This structure contains results of exthdrs parsing as offsets from skb->nh. @@ -346,8 +347,6 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to, #define __ipv6_only_sock(sk) (inet6_sk(sk)->ipv6only) #define ipv6_only_sock(sk) ((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk)) -#include - struct inet6_timewait_sock { struct in6_addr tw_v6_daddr; struct in6_addr tw_v6_rcv_saddr; diff --git a/include/linux/udp.h b/include/linux/udp.h index b60e0b4a25c..85a55658831 100644 --- a/include/linux/udp.h +++ b/include/linux/udp.h @@ -35,10 +35,10 @@ struct udphdr { #define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ #ifdef __KERNEL__ - #include -#include -#include +#include + +#include struct udp_sock { /* inet_sock has to be the first member */ diff --git a/include/net/atmclip.h b/include/net/atmclip.h index 47048b1d179..90fcc98e676 100644 --- a/include/net/atmclip.h +++ b/include/net/atmclip.h @@ -7,7 +7,6 @@ #define _ATMCLIP_H #include -#include #include #include #include @@ -18,6 +17,7 @@ #define CLIP_VCC(vcc) ((struct clip_vcc *) ((vcc)->user_back)) #define NEIGH2ENTRY(neigh) ((struct atmarp_entry *) (neigh)->primary_key) +struct sk_buff; struct clip_vcc { struct atm_vcc *vcc; /* VCC descriptor */ diff --git a/include/net/dst.h b/include/net/dst.h index 6c196a5baf2..bee8b84d329 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -9,6 +9,7 @@ #define _NET_DST_H #include +#include #include #include #include diff --git a/include/net/icmp.h b/include/net/icmp.h index 6cdebeee5f9..e7c3f20fbaf 100644 --- a/include/net/icmp.h +++ b/include/net/icmp.h @@ -20,12 +20,9 @@ #include #include -#include -#include -#include +#include #include -#include struct icmp_err { int errno; @@ -38,6 +35,10 @@ DECLARE_SNMP_STAT(struct icmp_mib, icmp_statistics); #define ICMP_INC_STATS_BH(field) SNMP_INC_STATS_BH(icmp_statistics, field) #define ICMP_INC_STATS_USER(field) SNMP_INC_STATS_USER(icmp_statistics, field) +struct dst_entry; +struct net_proto_family; +struct sk_buff; + extern void icmp_send(struct sk_buff *skb_in, int type, int code, u32 info); extern int icmp_rcv(struct sk_buff *skb); extern int icmp_ioctl(struct sock *sk, int cmd, unsigned long arg); diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index 225fc751d46..03b766afdc3 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -23,12 +23,17 @@ #ifndef IEEE80211_CRYPT_H #define IEEE80211_CRYPT_H -#include +#include +#include +#include enum { IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0), }; +struct sk_buff; +struct module; + struct ieee80211_crypto_ops { const char *name; struct list_head list; @@ -87,6 +92,8 @@ struct ieee80211_crypt_data { atomic_t refcnt; }; +struct ieee80211_device; + int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops); int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops); struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name); diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index 91888967d3e..50234fa56a6 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -16,9 +16,10 @@ #define _INET_CONNECTION_SOCK_H #include -#include #include #include + +#include #include #define INET_CSK_DEBUG 1 diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h index b0c47e2eccf..d599c6bfbb8 100644 --- a/include/net/inet_ecn.h +++ b/include/net/inet_ecn.h @@ -3,6 +3,8 @@ #include #include + +#include #include enum { diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index c83baa79f66..135d80fd658 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -26,6 +26,7 @@ #include #include +#include #include #include #include @@ -128,26 +129,6 @@ struct inet_hashinfo { kmem_cache_t *bind_bucket_cachep; }; -static inline unsigned int inet_ehashfn(const __u32 laddr, const __u16 lport, - const __u32 faddr, const __u16 fport) -{ - unsigned int h = (laddr ^ lport) ^ (faddr ^ fport); - h ^= h >> 16; - h ^= h >> 8; - return h; -} - -static inline int inet_sk_ehashfn(const struct sock *sk) -{ - const struct inet_sock *inet = inet_sk(sk); - const __u32 laddr = inet->rcv_saddr; - const __u16 lport = inet->num; - const __u32 faddr = inet->daddr; - const __u16 fport = inet->dport; - - return inet_ehashfn(laddr, lport, faddr, fport); -} - static inline struct inet_ehash_bucket *inet_ehash_bucket( struct inet_hashinfo *hashinfo, unsigned int hash) diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h new file mode 100644 index 00000000000..883eb529ef8 --- /dev/null +++ b/include/net/inet_sock.h @@ -0,0 +1,193 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Definitions for inet_sock + * + * Authors: Many, reorganised here by + * Arnaldo Carvalho de Melo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef _INET_SOCK_H +#define _INET_SOCK_H + +#include + +#include +#include + +#include +#include +#include + +/** struct ip_options - IP Options + * + * @faddr - Saved first hop address + * @is_setbyuser - Set by setsockopt? + * @is_data - Options in __data, rather than skb + * @is_strictroute - Strict source route + * @srr_is_hit - Packet destination addr was our one + * @is_changed - IP checksum more not valid + * @rr_needaddr - Need to record addr of outgoing dev + * @ts_needtime - Need to record timestamp + * @ts_needaddr - Need to record addr of outgoing dev + */ +struct ip_options { + __u32 faddr; + unsigned char optlen; + unsigned char srr; + unsigned char rr; + unsigned char ts; + unsigned char is_setbyuser:1, + is_data:1, + is_strictroute:1, + srr_is_hit:1, + is_changed:1, + rr_needaddr:1, + ts_needtime:1, + ts_needaddr:1; + unsigned char router_alert; + unsigned char __pad1; + unsigned char __pad2; + unsigned char __data[0]; +}; + +#define optlength(opt) (sizeof(struct ip_options) + opt->optlen) + +struct inet_request_sock { + struct request_sock req; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + u16 inet6_rsk_offset; + /* 2 bytes hole, try to pack */ +#endif + u32 loc_addr; + u32 rmt_addr; + u16 rmt_port; + u16 snd_wscale : 4, + rcv_wscale : 4, + tstamp_ok : 1, + sack_ok : 1, + wscale_ok : 1, + ecn_ok : 1, + acked : 1; + struct ip_options *opt; +}; + +static inline struct inet_request_sock *inet_rsk(const struct request_sock *sk) +{ + return (struct inet_request_sock *)sk; +} + +struct ip_mc_socklist; +struct ipv6_pinfo; +struct rtable; + +/** struct inet_sock - representation of INET sockets + * + * @sk - ancestor class + * @pinet6 - pointer to IPv6 control block + * @daddr - Foreign IPv4 addr + * @rcv_saddr - Bound local IPv4 addr + * @dport - Destination port + * @num - Local port + * @saddr - Sending source + * @uc_ttl - Unicast TTL + * @sport - Source port + * @id - ID counter for DF pkts + * @tos - TOS + * @mc_ttl - Multicasting TTL + * @is_icsk - is this an inet_connection_sock? + * @mc_index - Multicast device index + * @mc_list - Group array + * @cork - info to build ip hdr on each ip frag while socket is corked + */ +struct inet_sock { + /* sk and pinet6 has to be the first two members of inet_sock */ + struct sock sk; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + struct ipv6_pinfo *pinet6; +#endif + /* Socket demultiplex comparisons on incoming packets. */ + __u32 daddr; + __u32 rcv_saddr; + __u16 dport; + __u16 num; + __u32 saddr; + __s16 uc_ttl; + __u16 cmsg_flags; + struct ip_options *opt; + __u16 sport; + __u16 id; + __u8 tos; + __u8 mc_ttl; + __u8 pmtudisc; + __u8 recverr:1, + is_icsk:1, + freebind:1, + hdrincl:1, + mc_loop:1; + int mc_index; + __u32 mc_addr; + struct ip_mc_socklist *mc_list; + struct { + unsigned int flags; + unsigned int fragsize; + struct ip_options *opt; + struct rtable *rt; + int length; /* Total length of all frames */ + u32 addr; + struct flowi fl; + } cork; +}; + +#define IPCORK_OPT 1 /* ip-options has been held in ipcork.opt */ +#define IPCORK_ALLFRAG 2 /* always fragment (for ipv6 for now) */ + +static inline struct inet_sock *inet_sk(const struct sock *sk) +{ + return (struct inet_sock *)sk; +} + +static inline void __inet_sk_copy_descendant(struct sock *sk_to, + const struct sock *sk_from, + const int ancestor_size) +{ + memcpy(inet_sk(sk_to) + 1, inet_sk(sk_from) + 1, + sk_from->sk_prot->obj_size - ancestor_size); +} +#if !(defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)) +static inline void inet_sk_copy_descendant(struct sock *sk_to, + const struct sock *sk_from) +{ + __inet_sk_copy_descendant(sk_to, sk_from, sizeof(struct inet_sock)); +} +#endif + +extern int inet_sk_rebuild_header(struct sock *sk); + +static inline unsigned int inet_ehashfn(const __u32 laddr, const __u16 lport, + const __u32 faddr, const __u16 fport) +{ + unsigned int h = (laddr ^ lport) ^ (faddr ^ fport); + h ^= h >> 16; + h ^= h >> 8; + return h; +} + +static inline int inet_sk_ehashfn(const struct sock *sk) +{ + const struct inet_sock *inet = inet_sk(sk); + const __u32 laddr = inet->rcv_saddr; + const __u16 lport = inet->num; + const __u32 faddr = inet->daddr; + const __u16 fport = inet->dport; + + return inet_ehashfn(laddr, lport, faddr, fport); +} + +#endif /* _INET_SOCK_H */ diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h index e396a65473d..1da294c4752 100644 --- a/include/net/inet_timewait_sock.h +++ b/include/net/inet_timewait_sock.h @@ -17,13 +17,13 @@ #include -#include #include #include #include #include #include +#include #include #include #include diff --git a/include/net/ip.h b/include/net/ip.h index 4d6294ba038..f7e7fd728b6 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -24,14 +24,10 @@ #include #include -#include #include #include -#include -#include -#include -#include -#include + +#include #include struct sock; @@ -75,6 +71,13 @@ extern rwlock_t ip_ra_lock; #define IP_FRAG_TIME (30 * HZ) /* fragment lifetime */ +struct msghdr; +struct net_device; +struct packet_type; +struct rtable; +struct sk_buff; +struct sockaddr; + extern void ip_mc_dropsocket(struct sock *); extern void ip_mc_dropdevice(struct net_device *dev); extern int igmp_mc_proc_init(void); @@ -184,6 +187,8 @@ extern int sysctl_ip_dynaddr; extern void ipfrag_init(void); #ifdef CONFIG_INET +#include + /* The function in 2.2 was invalid, producing wrong result for * check=0xFEFF. It was noticed by Arthur Skawina _year_ ago. --ANK(000625) */ static inline diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 14de4ebd121..e000fa2cd5f 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -238,6 +238,8 @@ extern int fib_validate_source(u32 src, u32 dst, u8 tos, int oif, struct net_device *dev, u32 *spec_dst, u32 *itag); extern void fib_select_multipath(const struct flowi *flp, struct fib_result *res); +struct rtentry; + /* Exported by fib_semantics.c */ extern int ip_fib_check_default(u32 gw, struct net_device *dev); extern int fib_sync_down(u32 local, struct net_device *dev, int force); diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 3b5559a023a..7d2674fde19 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -251,16 +251,15 @@ struct ip_vs_daemon_user { #include #include /* for struct list_head */ #include /* for struct rwlock_t */ -#include /* for struct sk_buff */ -#include /* for struct iphdr */ #include /* for struct atomic_t */ -#include /* for struct neighbour */ -#include /* for struct dst_entry */ -#include #include +#include +#include #ifdef CONFIG_IP_VS_DEBUG +#include + extern int ip_vs_get_debug_level(void); #define IP_VS_DBG(level, msg...) \ do { \ @@ -429,8 +428,11 @@ struct ip_vs_stats spinlock_t lock; /* spin lock */ }; +struct dst_entry; +struct iphdr; struct ip_vs_conn; struct ip_vs_app; +struct sk_buff; struct ip_vs_protocol { struct ip_vs_protocol *next; diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 11a725662c3..860bbac4c4e 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -541,6 +541,9 @@ extern int sysctl_ip6frag_secret_interval; extern const struct proto_ops inet6_stream_ops; extern const struct proto_ops inet6_dgram_ops; +struct group_source_req; +struct group_filter; + extern int ip6_mc_source(int add, int omode, struct sock *sk, struct group_source_req *pgsr); extern int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf); diff --git a/include/net/ndisc.h b/include/net/ndisc.h index f85d6e4b744..bbac87eeb42 100644 --- a/include/net/ndisc.h +++ b/include/net/ndisc.h @@ -35,11 +35,20 @@ enum { #ifdef __KERNEL__ -#include -#include +#include +#include #include +#include +#include + #include -#include + +struct ctl_table; +struct file; +struct inet6_dev; +struct net_device; +struct net_proto_family; +struct sk_buff; extern struct neigh_table nd_tbl; @@ -108,7 +117,7 @@ extern int igmp6_event_report(struct sk_buff *skb); extern void igmp6_cleanup(void); #ifdef CONFIG_SYSCTL -extern int ndisc_ifinfo_sysctl_change(ctl_table *ctl, +extern int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, struct file * filp, void __user *buffer, diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 34c07731933..6fa9ae19074 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -49,8 +49,8 @@ #ifdef __KERNEL__ #include -#include #include +#include #include #include diff --git a/include/net/pkt_act.h b/include/net/pkt_act.h index bd08964b72c..b225d8472b7 100644 --- a/include/net/pkt_act.h +++ b/include/net/pkt_act.h @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/include/net/raw.h b/include/net/raw.h index f47917469b1..e67b28a0248 100644 --- a/include/net/raw.h +++ b/include/net/raw.h @@ -19,6 +19,8 @@ #include +#include + extern struct proto raw_prot; extern void raw_err(struct sock *, struct sk_buff *, u32 info); diff --git a/include/net/udp.h b/include/net/udp.h index 107b9d791a1..766fba1369c 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -22,9 +22,8 @@ #ifndef _UDP_H #define _UDP_H -#include -#include #include +#include #include #include #include @@ -62,6 +61,7 @@ static inline int udp_lport_inuse(u16 num) extern struct proto udp_prot; +struct sk_buff; extern void udp_err(struct sk_buff *, u32); diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 487abca3ca6..07d7b50cdd7 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -2,11 +2,12 @@ #define _NET_XFRM_H #include +#include #include #include #include #include -#include +#include #include #include #include diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 23422bd53a5..223f8270dae 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -33,8 +34,11 @@ #include #include #include + #include #include +#include + #include #include #include "br_private.h" diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c index c436e6c6242..9f6e0193ae1 100644 --- a/net/bridge/netfilter/ebt_log.c +++ b/net/bridge/netfilter/ebt_log.c @@ -9,6 +9,7 @@ * */ +#include #include #include #include diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 49424a42a2c..281a632fa6a 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include diff --git a/net/dccp/ccid.h b/net/dccp/ccid.h index c37eeeaf5c6..de681c6ad08 100644 --- a/net/dccp/ccid.h +++ b/net/dccp/ccid.h @@ -21,6 +21,8 @@ #define CCID_MAX 255 +struct tcp_info; + struct ccid { unsigned char ccid_id; const char *ccid_name; diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 99e8afa7ba1..3f244670764 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 2e194c8f995..c609dc78f48 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/net/dccp/output.c b/net/dccp/output.c index 95a3c2c6a3c..efd7ffb903a 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -15,6 +15,7 @@ #include #include +#include #include #include "ackvec.h" diff --git a/net/dccp/proto.c b/net/dccp/proto.c index e4e629ed9bf..65b11ea90d8 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include @@ -34,7 +34,6 @@ #include #include #include -#include #include "ccid.h" #include "dccp.h" diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index ff58f49c8b4..70fb2b88da6 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 4ed8a814c6c..36a6306ca5a 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -93,6 +93,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c index 035ad2c9e1b..aed537fa2c8 100644 --- a/net/ipv4/ah4.c +++ b/net/ipv4/ah4.c @@ -6,6 +6,7 @@ #include #include #include +#include #include diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index b425748f02d..37432088fe6 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -86,6 +86,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 04a6fe3e95a..7b9bb28e2ee 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -58,6 +58,7 @@ #endif #include +#include #include #include #include diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 1b18ce66e7b..73bfcae8af9 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -9,6 +9,7 @@ #include #include #include +#include #include /* decapsulation data for use when post-processing */ diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 19b1b984d68..18f5e509281 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c index 7ea0209cb16..e2890ec8159 100644 --- a/net/ipv4/fib_hash.c +++ b/net/ipv4/fib_hash.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c index 0b298bbc151..0dd4d06e456 100644 --- a/net/ipv4/fib_rules.c +++ b/net/ipv4/fib_rules.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 6d2a6ac070e..ef4724de735 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -36,6 +37,7 @@ #include #include +#include #include #include #include diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 92e23b2ad4d..be5a519cd2f 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -73,6 +73,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 4a195c724f0..34758118c10 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -91,6 +91,8 @@ #include #include #include + +#include #include #include #include diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index 473d0f2b2e0..e45846ae570 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -128,6 +128,7 @@ #include #include #include +#include #include #include diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c index dbe12da8d8b..d3f6c468faf 100644 --- a/net/ipv4/ip_options.c +++ b/net/ipv4/ip_options.c @@ -22,6 +22,7 @@ #include #include #include +#include /* * Write options to IP header, record destination address to diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index add019c746f..6986e11d65c 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index fc718df17b4..d64e2ec8da7 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -28,6 +28,7 @@ #include #include #include +#include struct ipcomp_tfms { struct list_head list; diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index e8674baaa8d..bb3613ec448 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -58,6 +59,7 @@ #include #include #include +#include #include #include diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 302b7eb507c..caa3b7d2e48 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -52,6 +52,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c index 2a3a8c59c65..d35cea31cb5 100644 --- a/net/ipv4/ipvs/ip_vs_conn.c +++ b/net/ipv4/ipvs/ip_vs_conn.c @@ -24,7 +24,9 @@ * */ +#include #include +#include #include #include /* for proc_net_* */ #include diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c index 9bdcf31b760..fe2c39d2a00 100644 --- a/net/ipv4/ipvs/ip_vs_ctl.c +++ b/net/ipv4/ipvs/ip_vs_ctl.c @@ -35,6 +35,7 @@ #include #include +#include #include #include diff --git a/net/ipv4/ipvs/ip_vs_dh.c b/net/ipv4/ipvs/ip_vs_dh.c index f3bc320dce9..9fee19c4c61 100644 --- a/net/ipv4/ipvs/ip_vs_dh.c +++ b/net/ipv4/ipvs/ip_vs_dh.c @@ -37,8 +37,10 @@ * */ +#include #include #include +#include #include diff --git a/net/ipv4/ipvs/ip_vs_est.c b/net/ipv4/ipvs/ip_vs_est.c index 67b3e2fc1fa..e7004741ac7 100644 --- a/net/ipv4/ipvs/ip_vs_est.c +++ b/net/ipv4/ipvs/ip_vs_est.c @@ -13,7 +13,10 @@ * Changes: * */ +#include #include +#include +#include #include #include diff --git a/net/ipv4/ipvs/ip_vs_lblc.c b/net/ipv4/ipvs/ip_vs_lblc.c index b6dad7e3710..6e5cb92a5c8 100644 --- a/net/ipv4/ipvs/ip_vs_lblc.c +++ b/net/ipv4/ipvs/ip_vs_lblc.c @@ -41,8 +41,10 @@ * me to write this module. */ +#include #include #include +#include /* for sysctl */ #include diff --git a/net/ipv4/ipvs/ip_vs_lblcr.c b/net/ipv4/ipvs/ip_vs_lblcr.c index 8c78ef76c12..32ba37ba72d 100644 --- a/net/ipv4/ipvs/ip_vs_lblcr.c +++ b/net/ipv4/ipvs/ip_vs_lblcr.c @@ -39,8 +39,10 @@ * */ +#include #include #include +#include /* for sysctl */ #include diff --git a/net/ipv4/ipvs/ip_vs_proto_ah.c b/net/ipv4/ipvs/ip_vs_proto_ah.c index 453e94a0bbd..8b0505b0931 100644 --- a/net/ipv4/ipvs/ip_vs_proto_ah.c +++ b/net/ipv4/ipvs/ip_vs_proto_ah.c @@ -12,6 +12,8 @@ * */ +#include +#include #include #include #include diff --git a/net/ipv4/ipvs/ip_vs_proto_esp.c b/net/ipv4/ipvs/ip_vs_proto_esp.c index 478e5c7c7e8..c36ccf057a1 100644 --- a/net/ipv4/ipvs/ip_vs_proto_esp.c +++ b/net/ipv4/ipvs/ip_vs_proto_esp.c @@ -12,6 +12,8 @@ * */ +#include +#include #include #include #include diff --git a/net/ipv4/ipvs/ip_vs_proto_udp.c b/net/ipv4/ipvs/ip_vs_proto_udp.c index 8ae5f2e0aef..89d9175d8f2 100644 --- a/net/ipv4/ipvs/ip_vs_proto_udp.c +++ b/net/ipv4/ipvs/ip_vs_proto_udp.c @@ -15,8 +15,11 @@ * */ +#include +#include #include #include +#include #include diff --git a/net/ipv4/ipvs/ip_vs_sh.c b/net/ipv4/ipvs/ip_vs_sh.c index 6f7c50e44a3..7775e6cc68b 100644 --- a/net/ipv4/ipvs/ip_vs_sh.c +++ b/net/ipv4/ipvs/ip_vs_sh.c @@ -34,8 +34,10 @@ * */ +#include #include #include +#include #include diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c index 2e5ced3d806..1bca714bda3 100644 --- a/net/ipv4/ipvs/ip_vs_sync.c +++ b/net/ipv4/ipvs/ip_vs_sync.c @@ -21,12 +21,14 @@ #include #include +#include #include #include #include #include #include #include /* for ip_mc_join_group */ +#include #include #include diff --git a/net/ipv4/netfilter/ip_conntrack_amanda.c b/net/ipv4/netfilter/ip_conntrack_amanda.c index e52847fa10f..0366eedb4d7 100644 --- a/net/ipv4/netfilter/ip_conntrack_amanda.c +++ b/net/ipv4/netfilter/ip_conntrack_amanda.c @@ -18,11 +18,13 @@ * */ +#include #include #include #include #include #include +#include #include #include diff --git a/net/ipv4/netfilter/ip_conntrack_proto_gre.c b/net/ipv4/netfilter/ip_conntrack_proto_gre.c index 744abb9d377..57956dee60c 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_gre.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_gre.c @@ -31,6 +31,7 @@ #include #include #include +#include static DEFINE_RWLOCK(ip_ct_gre_lock); #define ASSERT_READ_LOCK(x) diff --git a/net/ipv4/netfilter/ip_conntrack_proto_udp.c b/net/ipv4/netfilter/ip_conntrack_proto_udp.c index f2dcac7c766..46becbe4fe5 100644 --- a/net/ipv4/netfilter/ip_conntrack_proto_udp.c +++ b/net/ipv4/netfilter/ip_conntrack_proto_udp.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c index dd476b191f4..a88bcc55124 100644 --- a/net/ipv4/netfilter/ip_conntrack_standalone.c +++ b/net/ipv4/netfilter/ip_conntrack_standalone.c @@ -27,6 +27,7 @@ #endif #include #include +#include #define ASSERT_READ_LOCK(x) #define ASSERT_WRITE_LOCK(x) diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c index 8acb7ed40b4..4f95d477805 100644 --- a/net/ipv4/netfilter/ip_nat_snmp_basic.c +++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c @@ -44,6 +44,7 @@ * */ #include +#include #include #include #include @@ -53,6 +54,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c index 275a174c6fe..27860510ca6 100644 --- a/net/ipv4/netfilter/ipt_MASQUERADE.c +++ b/net/ipv4/netfilter/ipt_MASQUERADE.c @@ -11,6 +11,7 @@ #include #include +#include #include #include #include @@ -18,6 +19,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/netfilter/ipt_physdev.c b/net/ipv4/netfilter/ipt_physdev.c index 1a53924041f..03f554857a4 100644 --- a/net/ipv4/netfilter/ipt_physdev.c +++ b/net/ipv4/netfilter/ipt_physdev.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 0d7dc668db4..39d49dc333a 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index dbf82955aab..16984d4a8a0 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 67c036384e7..223abaa72bc 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -86,6 +86,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c index f3629730eb1..13cc7f89558 100644 --- a/net/ipv6/ah6.c +++ b/net/ipv6/ah6.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 8bfbe997079..6de8ee1a5ad 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -36,6 +36,7 @@ #include #include #include +#include #include static int esp6_output(struct xfrm_state *x, struct sk_buff *skb) diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index 55917fb1709..626dd39685f 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index dd80020d874..ea43ef1d94a 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -15,6 +15,7 @@ * - new extension header parser code */ #include +#include #include #include #include diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c index 0cd1d1bd903..ae4653bfd65 100644 --- a/net/ipv6/netfilter/ip6t_LOG.c +++ b/net/ipv6/netfilter/ip6t_LOG.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include diff --git a/net/ipv6/netfilter/ip6t_ah.c b/net/ipv6/netfilter/ip6t_ah.c index dde37793d20..268918d5dee 100644 --- a/net/ipv6/netfilter/ip6t_ah.c +++ b/net/ipv6/netfilter/ip6t_ah.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include diff --git a/net/ipv6/netfilter/ip6t_esp.c b/net/ipv6/netfilter/ip6t_esp.c index 24bc0cde43a..65937de1b58 100644 --- a/net/ipv6/netfilter/ip6t_esp.c +++ b/net/ipv6/netfilter/ip6t_esp.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 6cf0342706b..c4a2a8c4c33 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index d1b0747a5b9..de693b43c8e 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 17ba15fb6264f27374bc87f4c3f8519b80289d85 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 27 Dec 2005 20:57:40 -0800 Subject: [PPPOX]: Fix assignment into const proto_ops. And actually, with this, the whole pppox layer can basically be removed and subsumed into pppoe.c, no other pppox sub-protocol implementation exists and we've had this thing for at least 4 years. Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 9 ++++----- drivers/net/pppox.c | 10 +++------- include/linux/if_pppox.h | 3 +-- 3 files changed, 8 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 71e303b2864..9369f811075 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -85,7 +85,7 @@ static int pppoe_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) static int pppoe_xmit(struct ppp_channel *chan, struct sk_buff *skb); static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb); -static struct proto_ops pppoe_ops; +static const struct proto_ops pppoe_ops; static DEFINE_RWLOCK(pppoe_hash_lock); static struct ppp_channel_ops pppoe_chan_ops; @@ -1063,9 +1063,7 @@ static int __init pppoe_proc_init(void) static inline int pppoe_proc_init(void) { return 0; } #endif /* CONFIG_PROC_FS */ -/* ->ioctl are set at pppox_create */ - -static struct proto_ops pppoe_ops = { +static const struct proto_ops pppoe_ops = { .family = AF_PPPOX, .owner = THIS_MODULE, .release = pppoe_release, @@ -1081,7 +1079,8 @@ static struct proto_ops pppoe_ops = { .getsockopt = sock_no_getsockopt, .sendmsg = pppoe_sendmsg, .recvmsg = pppoe_recvmsg, - .mmap = sock_no_mmap + .mmap = sock_no_mmap, + .ioctl = pppox_ioctl, }; static struct pppox_proto pppoe_proto = { diff --git a/drivers/net/pppox.c b/drivers/net/pppox.c index 0c1e114527f..9315046b3f5 100644 --- a/drivers/net/pppox.c +++ b/drivers/net/pppox.c @@ -68,8 +68,7 @@ EXPORT_SYMBOL(register_pppox_proto); EXPORT_SYMBOL(unregister_pppox_proto); EXPORT_SYMBOL(pppox_unbind_sock); -static int pppox_ioctl(struct socket* sock, unsigned int cmd, - unsigned long arg) +int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { struct sock *sk = sock->sk; struct pppox_sock *po = pppox_sk(sk); @@ -105,6 +104,7 @@ static int pppox_ioctl(struct socket* sock, unsigned int cmd, return rc; } +EXPORT_SYMBOL(pppox_ioctl); static int pppox_create(struct socket *sock, int protocol) { @@ -119,11 +119,7 @@ static int pppox_create(struct socket *sock, int protocol) goto out; rc = pppox_protos[protocol]->create(sock); - if (!rc) { - /* We get to set the ioctl handler. */ - /* For everything else, pppox is just a shell. */ - sock->ops->ioctl = pppox_ioctl; - } + module_put(pppox_protos[protocol]->owner); out: return rc; diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index e677f73f13d..4fab3d0a4bc 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -157,8 +157,7 @@ struct pppox_proto { extern int register_pppox_proto(int proto_num, struct pppox_proto *pp); extern void unregister_pppox_proto(int proto_num); extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */ -extern int pppox_channel_ioctl(struct ppp_channel *pc, unsigned int cmd, - unsigned long arg); +extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); /* PPPoX socket states */ enum { -- cgit v1.2.3-70-g09d2 From fd30333d0fab9e870af89e112454996c188655e9 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 3 Jan 2006 14:19:25 -0800 Subject: [TG3]: fixup tot_len calculation Turning struct iphdr::tot_len into __be16 added sparse warning. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 59d916ccc81..eb86b059809 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3651,7 +3651,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) TXD_FLAG_CPU_POST_DMA); skb->nh.iph->check = 0; - skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len); + skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len); if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { skb->h.th->check = 0; base_flags &= ~TXD_FLAG_TCPUDP_CSUM; -- cgit v1.2.3-70-g09d2 From 3c19065a1e2c862becc576bc65e54f2bc1cbffe6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 3 Jan 2006 15:27:38 -0800 Subject: [IEEE80211] ipw2200: Simplify multicast checks. From: Stephen Hemminger is_multicast_ether_addr() accepts broadcast too, so the is_broadcast_ether_addr() calls are redundant. Signed-off-by: David S. Miller --- drivers/net/wireless/ipw2200.c | 15 +++++---------- net/ieee80211/ieee80211_rx.c | 5 ++--- 2 files changed, 7 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 5e7c7e944c9..64f6d1f2575 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -7456,8 +7456,7 @@ static void ipw_handle_data_packet(struct ipw_priv *priv, /* HW decrypt will not clear the WEP bit, MIC, PN, etc. */ hdr = (struct ieee80211_hdr_4addr *)rxb->skb->data; if (priv->ieee->iw_mode != IW_MODE_MONITOR && - ((is_multicast_ether_addr(hdr->addr1) || - is_broadcast_ether_addr(hdr->addr1)) ? + (is_multicast_ether_addr(hdr->addr1) ? !priv->ieee->host_mc_decrypt : !priv->ieee->host_decrypt)) ipw_rebuild_decrypted_skb(priv, rxb->skb); @@ -7648,8 +7647,7 @@ static inline int is_network_packet(struct ipw_priv *priv, return 0; /* {broad,multi}cast packets to our BSSID go through */ - if (is_multicast_ether_addr(header->addr1) || - is_broadcast_ether_addr(header->addr1)) + if (is_multicast_ether_addr(header->addr1)) return !memcmp(header->addr3, priv->bssid, ETH_ALEN); /* packets to our adapter go through */ @@ -7662,8 +7660,7 @@ static inline int is_network_packet(struct ipw_priv *priv, return 0; /* {broad,multi}cast packets to our BSS go through */ - if (is_multicast_ether_addr(header->addr1) || - is_broadcast_ether_addr(header->addr1)) + if (is_multicast_ether_addr(header->addr1)) return !memcmp(header->addr2, priv->bssid, ETH_ALEN); /* packets to our adapter go through */ @@ -9657,8 +9654,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: hdr_len = IEEE80211_3ADDR_LEN; - unicast = !(is_multicast_ether_addr(hdr->addr1) || - is_broadcast_ether_addr(hdr->addr1)); + unicast = !is_multicast_ether_addr(hdr->addr1); id = ipw_find_station(priv, hdr->addr1); if (id == IPW_INVALID_STATION) { id = ipw_add_station(priv, hdr->addr1); @@ -9673,8 +9669,7 @@ static inline int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, case IW_MODE_INFRA: default: - unicast = !(is_multicast_ether_addr(hdr->addr3) || - is_broadcast_ether_addr(hdr->addr3)); + unicast = !is_multicast_ether_addr(hdr->addr3); hdr_len = IEEE80211_3ADDR_LEN; id = 0; break; diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 03efaacbdb7..4cc6f41c693 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -410,9 +410,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, return 1; } - if ((is_multicast_ether_addr(hdr->addr1) || - is_broadcast_ether_addr(hdr->addr2)) ? ieee->host_mc_decrypt : - ieee->host_decrypt) { + if (is_multicast_ether_addr(hdr->addr1) + ? ieee->host_mc_decrypt : ieee->host_decrypt) { int idx = 0; if (skb->len >= hdrlen + 3) idx = skb->data[hdrlen + 3] >> 6; -- cgit v1.2.3-70-g09d2 From 81f280e22f14d6d976620acaa1b346a90f4e1adc Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 14:22:11 +0000 Subject: [PATCH] USB: pxa27x OHCI - Separate platform code from main driver To allow multiple platforms to use the PXA27x OHCI driver, the platform code needs to be moved into the board specific files in arch/arm/mach-pxa. This patch does this for mainstone and adds preliminary hooks to allow other boards to use the driver. This has been compile tested for mainstone and successfully run on Spitz (Sharp Zaurus SL-C3000) with the addition of an appropriate board support file. Signed-off-by: Richard Purdie Signed-off-by: Nicolas Pitre Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-pxa/mainstone.c | 21 ++++++++++ arch/arm/mach-pxa/pxa27x.c | 6 +++ drivers/usb/host/ohci-pxa27x.c | 85 +++++++++++++++++++++-------------------- include/asm-arm/arch-pxa/ohci.h | 18 +++++++++ 4 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 include/asm-arm/arch-pxa/ohci.h (limited to 'drivers') diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 07892f4012d..277498ae5b6 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "generic.h" @@ -393,6 +394,25 @@ static struct platform_device *platform_devices[] __initdata = { &mst_flash_device[1], }; +static int mainstone_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data mainstone_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = mainstone_ohci_init, +}; + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ @@ -424,6 +444,7 @@ static void __init mainstone_init(void) pxa_set_mci_info(&mainstone_mci_platform_data); pxa_set_ficp_info(&mainstone_ficp_platform_data); + pxa_set_ohci_info(&mainstone_ohci_platform_data); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index c722a9a91fc..b41b1efaa2c 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "generic.h" @@ -194,6 +195,11 @@ static struct platform_device ohci_device = { .resource = pxa27x_ohci_resources, }; +void __init pxa_set_ohci_info(struct pxaohci_platform_data *info) +{ + ohci_device.dev.platform_data = info; +} + static struct platform_device *devices[] __initdata = { &ohci_device, }; diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 9d65ec30799..c165d1ebed5 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -26,18 +26,12 @@ #include #include #include - - -#define PMM_NPS_MODE 1 -#define PMM_GLOBAL_MODE 2 -#define PMM_PERPORT_MODE 3 +#include #define PXA_UHC_MAX_PORTNUM 3 #define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 ) -static int pxa27x_ohci_pmm_state; - /* PMM_NPS_MODE -- PMM Non-power switching mode Ports are powered continuously. @@ -50,8 +44,6 @@ static int pxa27x_ohci_pmm_state; */ static int pxa27x_ohci_select_pmm( int mode ) { - pxa27x_ohci_pmm_state = mode; - switch ( mode ) { case PMM_NPS_MODE: UHCRHDA |= RH_A_NPS; @@ -71,7 +63,6 @@ static int pxa27x_ohci_select_pmm( int mode ) "Invalid mode %d, set to non-power switch mode.\n", mode ); - pxa27x_ohci_pmm_state = PMM_NPS_MODE; UHCRHDA |= RH_A_NPS; } @@ -82,8 +73,13 @@ extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ -static void pxa27x_start_hc(struct platform_device *dev) +static int pxa27x_start_hc(struct device *dev) { + int retval = 0; + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + pxa_set_cken(CKEN10_USBHOST, 1); UHCHR |= UHCHR_FHR; @@ -94,21 +90,11 @@ static void pxa27x_start_hc(struct platform_device *dev) while (UHCHR & UHCHR_FSBIR) cpu_relax(); - /* This could be properly abstracted away through the - device data the day more machines are supported and - their differences can be figured out correctly. */ - if (machine_is_mainstone()) { - /* setup Port1 GPIO pin. */ - pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ - pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ - - /* Set the Power Control Polarity Low and Power Sense - Polarity Low to active low. Supply power to USB ports. */ - UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & - ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + if (inf->init) + retval = inf->init(dev); - pxa27x_ohci_pmm_state = PMM_PERPORT_MODE; - } + if (retval < 0) + return retval; UHCHR &= ~UHCHR_SSE; @@ -117,10 +103,19 @@ static void pxa27x_start_hc(struct platform_device *dev) /* Clear any OTG Pin Hold */ if (PSSR & PSSR_OTGPH) PSSR |= PSSR_OTGPH; + + return 0; } -static void pxa27x_stop_hc(struct platform_device *dev) +static void pxa27x_stop_hc(struct device *dev) { + struct pxaohci_platform_data *inf; + + inf = dev->platform_data; + + if (inf->exit) + inf->exit(dev); + UHCHR |= UHCHR_FHR; udelay(11); UHCHR &= ~UHCHR_FHR; @@ -147,22 +142,27 @@ static void pxa27x_stop_hc(struct platform_device *dev) * through the hotplug entry's driver_data. * */ -int usb_hcd_pxa27x_probe (const struct hc_driver *driver, - struct platform_device *dev) +int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval; struct usb_hcd *hcd; + struct pxaohci_platform_data *inf; + + inf = pdev->dev.platform_data; - if (dev->resource[1].flags != IORESOURCE_IRQ) { + if (!inf) + return -ENODEV; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug ("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; } - hcd = usb_create_hcd (driver, &dev->dev, "pxa27x"); + hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); if (!hcd) return -ENOMEM; - hcd->rsrc_start = dev->resource[0].start; - hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed"); @@ -177,18 +177,22 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, goto err2; } - pxa27x_start_hc(dev); + if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) { + pr_debug("pxa27x_start_hc failed"); + goto err3; + } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state); + pxa27x_ohci_select_pmm(inf->port_mode); ohci_hcd_init(hcd_to_ohci(hcd)); - retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT); if (retval == 0) return retval; - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); + err3: iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); @@ -211,10 +215,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, * context, normally "rmmod", "apmd", or something similar. * */ -void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *dev) +void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); - pxa27x_stop_hc(dev); + pxa27x_stop_hc(&pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); @@ -292,15 +296,12 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) { - int ret; - pr_debug ("In ohci_hcd_pxa27x_drv_probe"); if (usb_disabled()) return -ENODEV; - ret = usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); - return ret; + return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev); } static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) diff --git a/include/asm-arm/arch-pxa/ohci.h b/include/asm-arm/arch-pxa/ohci.h new file mode 100644 index 00000000000..7da89569061 --- /dev/null +++ b/include/asm-arm/arch-pxa/ohci.h @@ -0,0 +1,18 @@ +#ifndef ASMARM_ARCH_OHCI_H +#define ASMARM_ARCH_OHCI_H + +struct device; + +struct pxaohci_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); + + int port_mode; +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 +}; + +extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); + +#endif -- cgit v1.2.3-70-g09d2 From 2e1dcc1600c1d83b26479edd076866595bbd3523 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sat, 12 Nov 2005 14:22:14 +0000 Subject: [PATCH] USB: Add pxa27x OHCI PM functions Add power management functions for the pxa27x USB OHCI host controller. This is a totally rewritten version of the patch by Nicolas Pitre and Todd Poynor which accounts for recent USB changes. Signed-off-by: Richard Purdie Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 33 +++++++++++++++++++++++++++------ 1 file changed, 27 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index c165d1ebed5..3b1cfe93948 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -312,28 +312,49 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) return 0; } -static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { -// struct usb_hcd *hcd = platform_get_drvdata(dev); - printk("%s: not implemented yet\n", __FUNCTION__); + struct ohci_hcd *ohci = platform_get_drvdata(pdev); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + pxa27x_stop_hc(&pdev->dev); + ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + pdev->dev.power.power_state = PMSG_SUSPEND; return 0; } -static int ohci_hcd_pxa27x_drv_resume(struct platform_device *dev) +static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { -// struct usb_hcd *hcd = platform_get_drvdata(dev); - printk("%s: not implemented yet\n", __FUNCTION__); + struct ohci_hcd *ohci = platform_get_drvdata(pdev); + int status; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + if ((status = pxa27x_start_hc(&pdev->dev)) < 0) + return status; + + pdev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(platform_get_drvdata(pdev)); return 0; } +#endif static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, +#ifdef CONFIG_PM .suspend = ohci_hcd_pxa27x_drv_suspend, .resume = ohci_hcd_pxa27x_drv_resume, +#endif .driver = { .name = "pxa27x-ohci", }, -- cgit v1.2.3-70-g09d2 From 61a87adf2e7b410da8e41799c61c21a7b8c8b001 Mon Sep 17 00:00:00 2001 From: David Kubicek Date: Tue, 1 Nov 2005 18:51:34 +0100 Subject: [PATCH] USB: Converting cdc acm to a ring queue this patch by David converts the sending queue of the CDC ACM driver to a queue of URBs. This is needed for quicker devices. Please apply. Signed-Off-By: Oliver Neukum Signed-off-by: Greg Kroah-Hartman drivers/usb/class/cdc-acm.c | 229 ++++++++++++++++++++++++++++++-------------- drivers/usb/class/cdc-acm.h | 33 +++++- 2 files changed, 185 insertions(+), 77 deletions(-) --- drivers/usb/class/cdc-acm.c | 227 ++++++++++++++++++++++++++++++-------------- drivers/usb/class/cdc-acm.h | 33 ++++++- 2 files changed, 184 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 1b475141297..72936dc15ec 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -6,6 +6,7 @@ * Copyright (c) 1999 Johannes Erdfelt * Copyright (c) 2000 Vojtech Pavlik * Copyright (c) 2004 Oliver Neukum + * Copyright (c) 2005 David Kubicek * * USB Abstract Control Model driver for USB modems and ISDN adapters * @@ -29,6 +30,7 @@ * config we want, sysadmin changes bConfigurationValue in sysfs. * v0.23 - use softirq for rx processing, as needed by tty layer * v0.24 - change probe method to evaluate CDC union descriptor + * v0.25 - downstream tasks paralelized to maximize throughput */ /* @@ -63,14 +65,15 @@ #include #include #include +#include #include "cdc-acm.h" /* * Version Information */ -#define DRIVER_VERSION "v0.23" -#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik" +#define DRIVER_VERSION "v0.25" +#define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek" #define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters" static struct usb_driver acm_driver; @@ -284,7 +287,9 @@ exit: /* data interface returns incoming bytes, or we got unthrottled */ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) { - struct acm *acm = urb->context; + struct acm_rb *buf; + struct acm_ru *rcv = urb->context; + struct acm *acm = rcv->instance; dbg("Entering acm_read_bulk with status %d\n", urb->status); if (!ACM_READY(acm)) @@ -293,49 +298,109 @@ static void acm_read_bulk(struct urb *urb, struct pt_regs *regs) if (urb->status) dev_dbg(&acm->data->dev, "bulk rx status %d\n", urb->status); - /* calling tty_flip_buffer_push() in_irq() isn't allowed */ - tasklet_schedule(&acm->bh); + buf = rcv->buffer; + buf->size = urb->actual_length; + + spin_lock(&acm->read_lock); + list_add_tail(&rcv->list, &acm->spare_read_urbs); + list_add_tail(&buf->list, &acm->filled_read_bufs); + spin_unlock(&acm->read_lock); + + tasklet_schedule(&acm->urb_task); } static void acm_rx_tasklet(unsigned long _acm) { struct acm *acm = (void *)_acm; - struct urb *urb = acm->readurb; + struct acm_rb *buf; struct tty_struct *tty = acm->tty; - unsigned char *data = urb->transfer_buffer; + struct acm_ru *rcv; + //unsigned long flags; int i = 0; dbg("Entering acm_rx_tasklet"); - if (urb->actual_length > 0 && !acm->throttle) { - for (i = 0; i < urb->actual_length && !acm->throttle; i++) { - /* if we insert more than TTY_FLIPBUF_SIZE characters, - * we drop them. */ - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { - tty_flip_buffer_push(tty); - } - tty_insert_flip_char(tty, data[i], 0); - } - dbg("Handed %d bytes to tty layer", i+1); - tty_flip_buffer_push(tty); + if (!ACM_READY(acm) || acm->throttle) + return; + +next_buffer: + spin_lock(&acm->read_lock); + if (list_empty(&acm->filled_read_bufs)) { + spin_unlock(&acm->read_lock); + goto urbs; } + buf = list_entry(acm->filled_read_bufs.next, + struct acm_rb, list); + list_del(&buf->list); + spin_unlock(&acm->read_lock); + + dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size); + + for (i = 0; i < buf->size && !acm->throttle; i++) { + /* if we insert more than TTY_FLIPBUF_SIZE characters, + we drop them. */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + tty_flip_buffer_push(tty); + } + tty_insert_flip_char(tty, buf->base[i], 0); + } + tty_flip_buffer_push(tty); spin_lock(&acm->throttle_lock); if (acm->throttle) { dbg("Throtteling noticed"); - memmove(data, data + i, urb->actual_length - i); - urb->actual_length -= i; - acm->resubmit_to_unthrottle = 1; + memmove(buf->base, buf->base + i, buf->size - i); + buf->size -= i; spin_unlock(&acm->throttle_lock); + spin_lock(&acm->read_lock); + list_add(&buf->list, &acm->filled_read_bufs); + spin_unlock(&acm->read_lock); return; } spin_unlock(&acm->throttle_lock); - urb->actual_length = 0; - urb->dev = acm->dev; - - i = usb_submit_urb(urb, GFP_ATOMIC); - if (i) - dev_dbg(&acm->data->dev, "bulk rx resubmit %d\n", i); + spin_lock(&acm->read_lock); + list_add(&buf->list, &acm->spare_read_bufs); + spin_unlock(&acm->read_lock); + goto next_buffer; + +urbs: + while (!list_empty(&acm->spare_read_bufs)) { + spin_lock(&acm->read_lock); + if (list_empty(&acm->spare_read_urbs)) { + spin_unlock(&acm->read_lock); + return; + } + rcv = list_entry(acm->spare_read_urbs.next, + struct acm_ru, list); + list_del(&rcv->list); + spin_unlock(&acm->read_lock); + + buf = list_entry(acm->spare_read_bufs.next, + struct acm_rb, list); + list_del(&buf->list); + + rcv->buffer = buf; + + usb_fill_bulk_urb(rcv->urb, acm->dev, + acm->rx_endpoint, + buf->base, + acm->readsize, + acm_read_bulk, rcv); + rcv->urb->transfer_dma = buf->dma; + rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf); + + /* This shouldn't kill the driver as unsuccessful URBs are returned to the + free-urbs-pool and resubmited ASAP */ + if (usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { + list_add(&buf->list, &acm->spare_read_bufs); + spin_lock(&acm->read_lock); + list_add(&rcv->list, &acm->spare_read_urbs); + spin_unlock(&acm->read_lock); + return; + } + } } /* data interface wrote those outgoing bytes */ @@ -369,6 +434,7 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) { struct acm *acm; int rv = -EINVAL; + int i; dbg("Entering acm_tty_open.\n"); down(&open_sem); @@ -382,7 +448,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) tty->driver_data = acm; acm->tty = tty; - + /* force low_latency on so that our tty_push actually forces the data through, + otherwise it is scheduled, and with high data rates data can get lost. */ + tty->low_latency = 1; if (acm->used++) { goto done; @@ -394,18 +462,20 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) goto bail_out; } - acm->readurb->dev = acm->dev; - if (usb_submit_urb(acm->readurb, GFP_KERNEL)) { - dbg("usb_submit_urb(read bulk) failed"); - goto bail_out_and_unlink; - } - if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS)) goto full_bailout; - /* force low_latency on so that our tty_push actually forces the data through, - otherwise it is scheduled, and with high data rates data can get lost. */ - tty->low_latency = 1; + INIT_LIST_HEAD(&acm->spare_read_urbs); + INIT_LIST_HEAD(&acm->spare_read_bufs); + INIT_LIST_HEAD(&acm->filled_read_bufs); + for (i = 0; i < ACM_NRU; i++) { + list_add(&(acm->ru[i].list), &acm->spare_read_urbs); + } + for (i = 0; i < ACM_NRB; i++) { + list_add(&(acm->rb[i].list), &acm->spare_read_bufs); + } + + tasklet_schedule(&acm->urb_task); done: err_out: @@ -413,8 +483,6 @@ err_out: return rv; full_bailout: - usb_kill_urb(acm->readurb); -bail_out_and_unlink: usb_kill_urb(acm->ctrlurb); bail_out: acm->used--; @@ -424,18 +492,22 @@ bail_out: static void acm_tty_unregister(struct acm *acm) { + int i; + tty_unregister_device(acm_tty_driver, acm->minor); usb_put_intf(acm->control); acm_table[acm->minor] = NULL; usb_free_urb(acm->ctrlurb); - usb_free_urb(acm->readurb); usb_free_urb(acm->writeurb); + for (i = 0; i < ACM_NRU; i++) + usb_free_urb(acm->ru[i].urb); kfree(acm); } static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; + int i; if (!acm || !acm->used) return; @@ -446,7 +518,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) acm_set_control(acm, acm->ctrlout = 0); usb_kill_urb(acm->ctrlurb); usb_kill_urb(acm->writeurb); - usb_kill_urb(acm->readurb); + for (i = 0; i < ACM_NRU; i++) + usb_kill_urb(acm->ru[i].urb); } else acm_tty_unregister(acm); } @@ -528,10 +601,7 @@ static void acm_tty_unthrottle(struct tty_struct *tty) spin_lock_bh(&acm->throttle_lock); acm->throttle = 0; spin_unlock_bh(&acm->throttle_lock); - if (acm->resubmit_to_unthrottle) { - acm->resubmit_to_unthrottle = 0; - acm_read_bulk(acm->readurb, NULL); - } + tasklet_schedule(&acm->urb_task); } static void acm_tty_break_ctl(struct tty_struct *tty, int state) @@ -694,6 +764,7 @@ static int acm_probe (struct usb_interface *intf, int call_interface_num = -1; int data_interface_num; unsigned long quirks; + int i; /* handle quirks deadly to normal probing*/ quirks = (unsigned long)id->driver_info; @@ -833,7 +904,7 @@ skip_normal_probe: } ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); - readsize = le16_to_cpu(epread->wMaxPacketSize); + readsize = le16_to_cpu(epread->wMaxPacketSize)*2; acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize); acm->control = control_interface; acm->data = data_interface; @@ -842,12 +913,14 @@ skip_normal_probe: acm->ctrl_caps = ac_management_function; acm->ctrlsize = ctrlsize; acm->readsize = readsize; - acm->bh.func = acm_rx_tasklet; - acm->bh.data = (unsigned long) acm; + acm->urb_task.func = acm_rx_tasklet; + acm->urb_task.data = (unsigned long) acm; INIT_WORK(&acm->work, acm_softint, acm); spin_lock_init(&acm->throttle_lock); spin_lock_init(&acm->write_lock); + spin_lock_init(&acm->read_lock); acm->write_ready = 1; + acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -856,13 +929,6 @@ skip_normal_probe: } acm->ctrl_buffer = buf; - buf = usb_buffer_alloc(usb_dev, readsize, GFP_KERNEL, &acm->read_dma); - if (!buf) { - dev_dbg(&intf->dev, "out of memory (read buffer alloc)\n"); - goto alloc_fail3; - } - acm->read_buffer = buf; - if (acm_write_buffers_alloc(acm) < 0) { dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n"); goto alloc_fail4; @@ -873,10 +939,25 @@ skip_normal_probe: dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n"); goto alloc_fail5; } - acm->readurb = usb_alloc_urb(0, GFP_KERNEL); - if (!acm->readurb) { - dev_dbg(&intf->dev, "out of memory (readurb kmalloc)\n"); - goto alloc_fail6; + for (i = 0; i < ACM_NRU; i++) { + struct acm_ru *rcv = &(acm->ru[i]); + + if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) { + dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n"); + goto alloc_fail7; + } + + rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + rcv->instance = acm; + } + for (i = 0; i < ACM_NRB; i++) { + struct acm_rb *buf = &(acm->rb[i]); + + // Using usb_buffer_alloc instead of kmalloc as Oliver suggested + if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) { + dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n"); + goto alloc_fail7; + } } acm->writeurb = usb_alloc_urb(0, GFP_KERNEL); if (!acm->writeurb) { @@ -889,15 +970,9 @@ skip_normal_probe: acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; acm->ctrlurb->transfer_dma = acm->ctrl_dma; - usb_fill_bulk_urb(acm->readurb, usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress), - acm->read_buffer, readsize, acm_read_bulk, acm); - acm->readurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP; - acm->readurb->transfer_dma = acm->read_dma; - usb_fill_bulk_urb(acm->writeurb, usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, acm); acm->writeurb->transfer_flags |= URB_NO_FSBR | URB_NO_TRANSFER_DMA_MAP; - /* acm->writeurb->transfer_dma = 0; */ dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); @@ -917,14 +992,14 @@ skip_normal_probe: return 0; alloc_fail7: - usb_free_urb(acm->readurb); -alloc_fail6: + for (i = 0; i < ACM_NRB; i++) + usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); + for (i = 0; i < ACM_NRU; i++) + usb_free_urb(acm->ru[i].urb); usb_free_urb(acm->ctrlurb); alloc_fail5: acm_write_buffers_free(acm); alloc_fail4: - usb_buffer_free(usb_dev, readsize, acm->read_buffer, acm->read_dma); -alloc_fail3: usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); alloc_fail2: kfree(acm); @@ -936,6 +1011,7 @@ static void acm_disconnect(struct usb_interface *intf) { struct acm *acm = usb_get_intfdata (intf); struct usb_device *usb_dev = interface_to_usbdev(intf); + int i; if (!acm || !acm->dev) { dbg("disconnect on nonexisting interface"); @@ -946,15 +1022,24 @@ static void acm_disconnect(struct usb_interface *intf) acm->dev = NULL; usb_set_intfdata (intf, NULL); + tasklet_disable(&acm->urb_task); + usb_kill_urb(acm->ctrlurb); - usb_kill_urb(acm->readurb); usb_kill_urb(acm->writeurb); + for (i = 0; i < ACM_NRU; i++) + usb_kill_urb(acm->ru[i].urb); + + INIT_LIST_HEAD(&acm->filled_read_bufs); + INIT_LIST_HEAD(&acm->spare_read_bufs); + + tasklet_enable(&acm->urb_task); flush_scheduled_work(); /* wait for acm_softint */ acm_write_buffers_free(acm); - usb_buffer_free(usb_dev, acm->readsize, acm->read_buffer, acm->read_dma); usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); + for (i = 0; i < ACM_NRB; i++) + usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); usb_driver_release_interface(&acm_driver, acm->data); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 963a5dfd209..fd2aaccdcba 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -59,6 +59,9 @@ * when processing onlcr, so we only need 2 buffers. */ #define ACM_NWB 2 +#define ACM_NRU 16 +#define ACM_NRB 16 + struct acm_wb { unsigned char *buf; dma_addr_t dmah; @@ -66,22 +69,43 @@ struct acm_wb { int use; }; +struct acm_rb { + struct list_head list; + int size; + unsigned char *base; + dma_addr_t dma; +}; + +struct acm_ru { + struct list_head list; + struct acm_rb *buffer; + struct urb *urb; + struct acm *instance; +}; + struct acm { struct usb_device *dev; /* the corresponding usb device */ struct usb_interface *control; /* control interface */ struct usb_interface *data; /* data interface */ struct tty_struct *tty; /* the corresponding tty */ - struct urb *ctrlurb, *readurb, *writeurb; /* urbs */ - u8 *ctrl_buffer, *read_buffer; /* buffers of urbs */ - dma_addr_t ctrl_dma, read_dma; /* dma handles of buffers */ + struct urb *ctrlurb, *writeurb; /* urbs */ + u8 *ctrl_buffer; /* buffers of urbs */ + dma_addr_t ctrl_dma; /* dma handles of buffers */ struct acm_wb wb[ACM_NWB]; + struct acm_ru ru[ACM_NRU]; + struct acm_rb rb[ACM_NRB]; + int rx_endpoint; + spinlock_t read_lock; + struct list_head spare_read_urbs; + struct list_head spare_read_bufs; + struct list_head filled_read_bufs; int write_current; /* current write buffer */ int write_used; /* number of non-empty write buffers */ int write_ready; /* write urb is not running */ spinlock_t write_lock; struct usb_cdc_line_coding line; /* bits, stop, parity */ struct work_struct work; /* work queue entry for line discipline waking up */ - struct tasklet_struct bh; /* rx processing */ + struct tasklet_struct urb_task; /* rx processing */ spinlock_t throttle_lock; /* synchronize throtteling and read callback */ unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ unsigned int ctrlout; /* output control lines (DTR, RTS) */ @@ -91,7 +115,6 @@ struct acm { unsigned int minor; /* acm minor number */ unsigned char throttle; /* throttled by tty layer */ unsigned char clocal; /* termios CLOCAL */ - unsigned char resubmit_to_unthrottle; /* throtteling has disabled the read urb */ unsigned int ctrl_caps; /* control capabilities from the class specific header */ }; -- cgit v1.2.3-70-g09d2 From 535488fcf1e4b2331e1c4a1eb67ca09468c13507 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Fri, 28 Oct 2005 15:04:45 +0300 Subject: [PATCH] USB: isp116x-hcd: support reiniting HC on resume Until now the isp116x-hcd had no support to reinitialize the HC on resume, if the controller lost its state during suspend. This patch, generated against your Oct 26 git tree, adds that support. The patch is basically the same as the one tested by Ivan Kalatchev, who reported the problem, on 2.6.13. Please apply, Support reinitializing the isp116x host controller from scratch on resume, if the controller has lost its state. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 82f64986bc2..5f56c4a42f5 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1201,11 +1201,14 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) return ret; } +/* Get rid of these declarations later in cleanup */ +static int isp116x_reset(struct usb_hcd *hcd); +static int isp116x_start(struct usb_hcd *hcd); + static int isp116x_bus_resume(struct usb_hcd *hcd) { struct isp116x *isp116x = hcd_to_isp116x(hcd); u32 val; - int ret = -EINPROGRESS; msleep(5); spin_lock_irq(&isp116x->lock); @@ -1219,20 +1222,27 @@ static int isp116x_bus_resume(struct usb_hcd *hcd) case HCCONTROL_USB_RESUME: break; case HCCONTROL_USB_OPER: + spin_unlock_irq(&isp116x->lock); /* Without setting power_state here the SUSPENDED state won't be removed from sysfs/usbN/power.state as a response to remote wakeup. Maybe in the future. */ hcd->self.root_hub->dev.power.power_state = PMSG_ON; - ret = 0; - break; + return 0; default: - ret = -EBUSY; - } - - if (ret != -EINPROGRESS) { + /* HCCONTROL_USB_RESET: this may happen, when during + suspension the HC lost power. Reinitialize completely */ spin_unlock_irq(&isp116x->lock); - return ret; + DBG("Chip has been reset while suspended. Reinit from scratch.\n"); + isp116x_reset(hcd); + isp116x_start(hcd); + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 1, NULL, 0); + if ((isp116x->rhdesca & RH_A_NDP) == 2) + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 2, NULL, 0); + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; } val = isp116x->rhdesca & RH_A_NDP; -- cgit v1.2.3-70-g09d2 From 959eea2191e8d74b16ef019b0f4bf875c14f4547 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Thu, 3 Nov 2005 17:38:14 +0200 Subject: [PATCH] USB: isp116x-hcd: cleanup The attached patch makes a cleanup of isp116x-hcd. Most of the volume of the patch comes from 2 sources: moving the code around to get rid of a few function prototypes and reworking register dumping functions/macros. Among other things, switched over from using procfs to debugfs. Cleanup. The following changes were made: - Rework register dumping code so it can be used for dumping to both syslog and debugfs. - Switch from procfs to debugfs.. - Die gracefully on Unrecoverable Error interrupt. - Fix memory leak in isp116x_urb_enqueue(), if HC happens to die in a narrow time window. - Fix a 'sparce' warning (unnecessary cast). - Report Devices Removable for root hub ports by default (was Devices Permanently Attached). - Move bus suspend/resume functions down in code to get rid of a few function prototypes. - A number of one-line cleanups. - Add an entry to MAINTAINERS. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman MAINTAINERS | 6 drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++-- 3 files changed, 230 insertions(+), 288 deletions(-) --- MAINTAINERS | 6 + drivers/usb/host/isp116x-hcd.c | 429 ++++++++++++++++------------------------- drivers/usb/host/isp116x.h | 83 +++++--- 3 files changed, 230 insertions(+), 288 deletions(-) (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 6af683025ae..861d2975476 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2640,6 +2640,12 @@ L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net S: Maintained +USB ISP116X DRIVER +P: Olav Kongas +M: ok@artecdesign.ee +L: linux-usb-devel@lists.sourceforge.net +S: Maintained + USB KAWASAKI LSI DRIVER P: Oliver Neukum M: oliver@neukum.name diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 5f56c4a42f5..342cfadc999 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -55,19 +55,13 @@ /* enqueuing/finishing log of urbs */ //#define URB_TRACE -#include #include -#include -#include #include -#include -#include -#include -#include +#include +#include #include #include #include -#include #include #include #include @@ -77,14 +71,10 @@ #include #include -#ifndef DEBUG -# define STUB_DEBUG_FILE -#endif - #include "../core/hcd.h" #include "isp116x.h" -#define DRIVER_VERSION "05 Aug 2005" +#define DRIVER_VERSION "03 Nov 2005" #define DRIVER_DESC "ISP116x USB Host Controller Driver" MODULE_DESCRIPTION(DRIVER_DESC); @@ -305,9 +295,8 @@ static void postproc_atl_queue(struct isp116x *isp116x) udev = urb->dev; ptd = &ep->ptd; cc = PTD_GET_CC(ptd); - - spin_lock(&urb->lock); short_not_ok = 1; + spin_lock(&urb->lock); /* Data underrun is special. For allowed underrun we clear the error and continue as normal. For @@ -420,7 +409,7 @@ static void postproc_atl_queue(struct isp116x *isp116x) ep->nextpid = 0; break; default: - BUG_ON(1); + BUG(); } spin_unlock(&urb->lock); } @@ -628,8 +617,12 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) u32 intstat = isp116x_read_reg32(isp116x, HCINTSTAT); isp116x_write_reg32(isp116x, HCINTSTAT, intstat); if (intstat & HCINT_UE) { - ERR("Unrecoverable error\n"); - /* What should we do here? Reset? */ + ERR("Unrecoverable error, HC is dead!\n"); + /* IRQ's are off, we do no DMA, + perfectly ready to die ... */ + hcd->state = HC_STATE_HALT; + ret = IRQ_HANDLED; + goto done; } if (intstat & HCINT_RHSC) /* When root hub or any of its ports is going @@ -640,7 +633,6 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) if (intstat & HCINT_RD) { DBG("---- remote wakeup\n"); usb_hcd_resume_root_hub(hcd); - ret = IRQ_HANDLED; } irqstat &= ~HCuPINT_OPR; ret = IRQ_HANDLED; @@ -651,6 +643,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs) } isp116x_write_reg16(isp116x, HCuPINTENB, isp116x->irqenb); + done: spin_unlock(&isp116x->lock); return ret; } @@ -724,6 +717,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd, spin_lock_irqsave(&isp116x->lock, flags); if (!HC_IS_RUNNING(hcd->state)) { + kfree(ep); ret = -ENODEV; goto fail; } @@ -888,7 +882,7 @@ static void isp116x_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) { int i; - struct isp116x_ep *ep = hep->hcpriv;; + struct isp116x_ep *ep = hep->hcpriv; if (!ep) return; @@ -916,8 +910,6 @@ static int isp116x_get_frame(struct usb_hcd *hcd) return (int)fmnum; } -/*----------------------------------------------------------------*/ - /* Adapted from ohci-hub.c. Currently we don't support autosuspend. */ @@ -968,11 +960,10 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, desc->bHubContrCurrent = 0; desc->bNbrPorts = (u8) (reg & 0x3); /* Power switching, device type, overcurrent. */ - desc->wHubCharacteristics = - (__force __u16) cpu_to_le16((u16) ((reg >> 8) & 0x1f)); + desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; + desc->bitmap[0] = 0; desc->bitmap[1] = ~0; } @@ -1159,145 +1150,9 @@ static int isp116x_hub_control(struct usb_hcd *hcd, return ret; } -#ifdef CONFIG_PM - -static int isp116x_bus_suspend(struct usb_hcd *hcd) -{ - struct isp116x *isp116x = hcd_to_isp116x(hcd); - unsigned long flags; - u32 val; - int ret = 0; - - spin_lock_irqsave(&isp116x->lock, flags); - - val = isp116x_read_reg32(isp116x, HCCONTROL); - switch (val & HCCONTROL_HCFS) { - case HCCONTROL_USB_OPER: - hcd->state = HC_STATE_QUIESCING; - val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); - val |= HCCONTROL_USB_SUSPEND; - if (hcd->remote_wakeup) - val |= HCCONTROL_RWE; - /* Wait for usb transfers to finish */ - mdelay(2); - isp116x_write_reg32(isp116x, HCCONTROL, val); - hcd->state = HC_STATE_SUSPENDED; - /* Wait for devices to suspend */ - mdelay(5); - case HCCONTROL_USB_SUSPEND: - break; - case HCCONTROL_USB_RESUME: - isp116x_write_reg32(isp116x, HCCONTROL, - (val & ~HCCONTROL_HCFS) | - HCCONTROL_USB_RESET); - case HCCONTROL_USB_RESET: - ret = -EBUSY; - break; - default: - ret = -EINVAL; - } - - spin_unlock_irqrestore(&isp116x->lock, flags); - return ret; -} - -/* Get rid of these declarations later in cleanup */ -static int isp116x_reset(struct usb_hcd *hcd); -static int isp116x_start(struct usb_hcd *hcd); - -static int isp116x_bus_resume(struct usb_hcd *hcd) -{ - struct isp116x *isp116x = hcd_to_isp116x(hcd); - u32 val; - - msleep(5); - spin_lock_irq(&isp116x->lock); - - val = isp116x_read_reg32(isp116x, HCCONTROL); - switch (val & HCCONTROL_HCFS) { - case HCCONTROL_USB_SUSPEND: - val &= ~HCCONTROL_HCFS; - val |= HCCONTROL_USB_RESUME; - isp116x_write_reg32(isp116x, HCCONTROL, val); - case HCCONTROL_USB_RESUME: - break; - case HCCONTROL_USB_OPER: - spin_unlock_irq(&isp116x->lock); - /* Without setting power_state here the - SUSPENDED state won't be removed from - sysfs/usbN/power.state as a response to remote - wakeup. Maybe in the future. */ - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - return 0; - default: - /* HCCONTROL_USB_RESET: this may happen, when during - suspension the HC lost power. Reinitialize completely */ - spin_unlock_irq(&isp116x->lock); - DBG("Chip has been reset while suspended. Reinit from scratch.\n"); - isp116x_reset(hcd); - isp116x_start(hcd); - isp116x_hub_control(hcd, SetPortFeature, - USB_PORT_FEAT_POWER, 1, NULL, 0); - if ((isp116x->rhdesca & RH_A_NDP) == 2) - isp116x_hub_control(hcd, SetPortFeature, - USB_PORT_FEAT_POWER, 2, NULL, 0); - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - return 0; - } - - val = isp116x->rhdesca & RH_A_NDP; - while (val--) { - u32 stat = - isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1); - /* force global, not selective, resume */ - if (!(stat & RH_PS_PSS)) - continue; - DBG("%s: Resuming port %d\n", __func__, val); - isp116x_write_reg32(isp116x, RH_PS_POCI, val - ? HCRHPORT2 : HCRHPORT1); - } - spin_unlock_irq(&isp116x->lock); - - hcd->state = HC_STATE_RESUMING; - mdelay(20); - - /* Go operational */ - spin_lock_irq(&isp116x->lock); - val = isp116x_read_reg32(isp116x, HCCONTROL); - isp116x_write_reg32(isp116x, HCCONTROL, - (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER); - spin_unlock_irq(&isp116x->lock); - /* see analogous comment above */ - hcd->self.root_hub->dev.power.power_state = PMSG_ON; - hcd->state = HC_STATE_RUNNING; - - return 0; -} - - -#else - -#define isp116x_bus_suspend NULL -#define isp116x_bus_resume NULL - -#endif - /*-----------------------------------------------------------------*/ -#ifdef STUB_DEBUG_FILE - -static inline void create_debug_file(struct isp116x *isp116x) -{ -} - -static inline void remove_debug_file(struct isp116x *isp116x) -{ -} - -#else - -#include -#include +#ifdef CONFIG_DEBUG_FS static void dump_irq(struct seq_file *s, char *label, u16 mask) { @@ -1321,13 +1176,9 @@ static void dump_int(struct seq_file *s, char *label, u32 mask) mask & HCINT_SF ? " sof" : "", mask & HCINT_SO ? " so" : ""); } -static int proc_isp116x_show(struct seq_file *s, void *unused) +static int isp116x_show_dbg(struct seq_file *s, void *unused) { struct isp116x *isp116x = s->private; - struct isp116x_ep *ep; - struct urb *urb; - unsigned i; - char *str; seq_printf(s, "%s\n%s version %s\n", isp116x_to_hcd(isp116x)->product_desc, hcd_name, @@ -1343,105 +1194,50 @@ static int proc_isp116x_show(struct seq_file *s, void *unused) } spin_lock_irq(&isp116x->lock); - dump_irq(s, "hc_irq_enable", isp116x_read_reg16(isp116x, HCuPINTENB)); dump_irq(s, "hc_irq_status", isp116x_read_reg16(isp116x, HCuPINT)); dump_int(s, "hc_int_enable", isp116x_read_reg32(isp116x, HCINTENB)); dump_int(s, "hc_int_status", isp116x_read_reg32(isp116x, HCINTSTAT)); - - list_for_each_entry(ep, &isp116x->async, schedule) { - - switch (ep->nextpid) { - case USB_PID_IN: - str = "in"; - break; - case USB_PID_OUT: - str = "out"; - break; - case USB_PID_SETUP: - str = "setup"; - break; - case USB_PID_ACK: - str = "status"; - break; - default: - str = "?"; - break; - }; - seq_printf(s, "%p, ep%d%s, maxpacket %d:\n", ep, - ep->epnum, str, ep->maxpacket); - list_for_each_entry(urb, &ep->hep->urb_list, urb_list) { - seq_printf(s, " urb%p, %d/%d\n", urb, - urb->actual_length, - urb->transfer_buffer_length); - } - } - if (!list_empty(&isp116x->async)) - seq_printf(s, "\n"); - - seq_printf(s, "periodic size= %d\n", PERIODIC_SIZE); - - for (i = 0; i < PERIODIC_SIZE; i++) { - ep = isp116x->periodic[i]; - if (!ep) - continue; - seq_printf(s, "%2d [%3d]:\n", i, isp116x->load[i]); - - /* DUMB: prints shared entries multiple times */ - do { - seq_printf(s, " %d/%p (%sdev%d ep%d%s max %d)\n", - ep->period, ep, - (ep->udev->speed == - USB_SPEED_FULL) ? "" : "ls ", - ep->udev->devnum, ep->epnum, - (ep->epnum == - 0) ? "" : ((ep->nextpid == - USB_PID_IN) ? "in" : "out"), - ep->maxpacket); - ep = ep->next; - } while (ep); - } + isp116x_show_regs_seq(isp116x, s); spin_unlock_irq(&isp116x->lock); seq_printf(s, "\n"); return 0; } -static int proc_isp116x_open(struct inode *inode, struct file *file) +static int isp116x_open_seq(struct inode *inode, struct file *file) { - return single_open(file, proc_isp116x_show, PDE(inode)->data); + return single_open(file, isp116x_show_dbg, inode->u.generic_ip); } -static struct file_operations proc_ops = { - .open = proc_isp116x_open, +static struct file_operations isp116x_debug_fops = { + .open = isp116x_open_seq, .read = seq_read, .llseek = seq_lseek, .release = single_release, }; -/* expect just one isp116x per system */ -static const char proc_filename[] = "driver/isp116x"; - -static void create_debug_file(struct isp116x *isp116x) +static int create_debug_file(struct isp116x *isp116x) { - struct proc_dir_entry *pde; - - pde = create_proc_entry(proc_filename, 0, NULL); - if (pde == NULL) - return; - - pde->proc_fops = &proc_ops; - pde->data = isp116x; - isp116x->pde = pde; + isp116x->dentry = debugfs_create_file(hcd_name, + S_IRUGO, NULL, isp116x, + &isp116x_debug_fops); + if (!isp116x->dentry) + return -ENOMEM; + return 0; } static void remove_debug_file(struct isp116x *isp116x) { - if (isp116x->pde) - remove_proc_entry(proc_filename, NULL); + debugfs_remove(isp116x->dentry); } -#endif +#else + +#define create_debug_file(d) 0 +#define remove_debug_file(d) do{}while(0) + +#endif /* CONFIG_DEBUG_FS */ /*-----------------------------------------------------------------*/ @@ -1476,7 +1272,7 @@ static int isp116x_reset(struct usb_hcd *hcd) struct isp116x *isp116x = hcd_to_isp116x(hcd); unsigned long t; u16 clkrdy = 0; - int ret = 0, timeout = 15 /* ms */ ; + int ret, timeout = 15 /* ms */ ; ret = isp116x_sw_reset(isp116x); if (ret) @@ -1492,7 +1288,7 @@ static int isp116x_reset(struct usb_hcd *hcd) break; } if (!clkrdy) { - ERR("Clock not ready after 20ms\n"); + ERR("Clock not ready after %dms\n", timeout); /* After sw_reset the clock won't report to be ready, if H_WAKEUP pin is high. */ ERR("Please make sure that the H_WAKEUP pin is pulled low!\n"); @@ -1610,12 +1406,128 @@ static int isp116x_start(struct usb_hcd *hcd) isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS); isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS); - isp116x_show_regs(isp116x); + isp116x_show_regs_log(isp116x); spin_unlock_irqrestore(&isp116x->lock, flags); return 0; } -/*-----------------------------------------------------------------*/ +#ifdef CONFIG_PM + +static int isp116x_bus_suspend(struct usb_hcd *hcd) +{ + struct isp116x *isp116x = hcd_to_isp116x(hcd); + unsigned long flags; + u32 val; + int ret = 0; + + spin_lock_irqsave(&isp116x->lock, flags); + + val = isp116x_read_reg32(isp116x, HCCONTROL); + switch (val & HCCONTROL_HCFS) { + case HCCONTROL_USB_OPER: + hcd->state = HC_STATE_QUIESCING; + val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); + val |= HCCONTROL_USB_SUSPEND; + if (hcd->remote_wakeup) + val |= HCCONTROL_RWE; + /* Wait for usb transfers to finish */ + mdelay(2); + isp116x_write_reg32(isp116x, HCCONTROL, val); + hcd->state = HC_STATE_SUSPENDED; + /* Wait for devices to suspend */ + mdelay(5); + case HCCONTROL_USB_SUSPEND: + break; + case HCCONTROL_USB_RESUME: + isp116x_write_reg32(isp116x, HCCONTROL, + (val & ~HCCONTROL_HCFS) | + HCCONTROL_USB_RESET); + case HCCONTROL_USB_RESET: + ret = -EBUSY; + break; + default: + ret = -EINVAL; + } + + spin_unlock_irqrestore(&isp116x->lock, flags); + return ret; +} + +static int isp116x_bus_resume(struct usb_hcd *hcd) +{ + struct isp116x *isp116x = hcd_to_isp116x(hcd); + u32 val; + + msleep(5); + spin_lock_irq(&isp116x->lock); + + val = isp116x_read_reg32(isp116x, HCCONTROL); + switch (val & HCCONTROL_HCFS) { + case HCCONTROL_USB_SUSPEND: + val &= ~HCCONTROL_HCFS; + val |= HCCONTROL_USB_RESUME; + isp116x_write_reg32(isp116x, HCCONTROL, val); + case HCCONTROL_USB_RESUME: + break; + case HCCONTROL_USB_OPER: + spin_unlock_irq(&isp116x->lock); + /* Without setting power_state here the + SUSPENDED state won't be removed from + sysfs/usbN/power.state as a response to remote + wakeup. Maybe in the future. */ + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; + default: + /* HCCONTROL_USB_RESET: this may happen, when during + suspension the HC lost power. Reinitialize completely */ + spin_unlock_irq(&isp116x->lock); + DBG("Chip has been reset while suspended. Reinit from scratch.\n"); + isp116x_reset(hcd); + isp116x_start(hcd); + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 1, NULL, 0); + if ((isp116x->rhdesca & RH_A_NDP) == 2) + isp116x_hub_control(hcd, SetPortFeature, + USB_PORT_FEAT_POWER, 2, NULL, 0); + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + return 0; + } + + val = isp116x->rhdesca & RH_A_NDP; + while (val--) { + u32 stat = + isp116x_read_reg32(isp116x, val ? HCRHPORT2 : HCRHPORT1); + /* force global, not selective, resume */ + if (!(stat & RH_PS_PSS)) + continue; + DBG("%s: Resuming port %d\n", __func__, val); + isp116x_write_reg32(isp116x, RH_PS_POCI, val + ? HCRHPORT2 : HCRHPORT1); + } + spin_unlock_irq(&isp116x->lock); + + hcd->state = HC_STATE_RESUMING; + msleep(20); + + /* Go operational */ + spin_lock_irq(&isp116x->lock); + val = isp116x_read_reg32(isp116x, HCCONTROL); + isp116x_write_reg32(isp116x, HCCONTROL, + (val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER); + spin_unlock_irq(&isp116x->lock); + /* see analogous comment above */ + hcd->self.root_hub->dev.power.power_state = PMSG_ON; + hcd->state = HC_STATE_RUNNING; + + return 0; +} + +#else + +#define isp116x_bus_suspend NULL +#define isp116x_bus_resume NULL + +#endif static struct hc_driver isp116x_hc_driver = { .description = hcd_name, @@ -1745,12 +1657,19 @@ static int __init isp116x_probe(struct platform_device *pdev) } ret = usb_add_hcd(hcd, irq, SA_INTERRUPT); - if (ret != 0) + if (ret) goto err6; - create_debug_file(isp116x); + ret = create_debug_file(isp116x); + if (ret) { + ERR("Couldn't create debugfs entry\n"); + goto err7; + } + return 0; + err7: + usb_remove_hcd(hcd); err6: usb_put_hcd(hcd); err5: @@ -1772,13 +1691,9 @@ static int __init isp116x_probe(struct platform_device *pdev) */ static int isp116x_suspend(struct platform_device *dev, pm_message_t state) { - int ret = 0; - - VDBG("%s: state %x\n", __func__, state); - + VDBG("%s: state %x\n", __func__, state.event); dev->dev.power.power_state = state; - - return ret; + return 0; } /* @@ -1786,13 +1701,9 @@ static int isp116x_suspend(struct platform_device *dev, pm_message_t state) */ static int isp116x_resume(struct platform_device *dev) { - int ret = 0; - - VDBG("%s: state %x\n", __func__, dev->dev.power.power_state); - + VDBG("%s: state %x\n", __func__, dev->power.power_state.event); dev->dev.power.power_state = PMSG_ON; - - return ret; + return 0; } #else diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index c6fec96785f..a1b7c3813d3 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -259,7 +259,7 @@ struct isp116x { struct isp116x_platform_data *board; - struct proc_dir_entry *pde; + struct dentry *dentry; unsigned long stat1, stat2, stat4, stat8, stat16; /* HC registers */ @@ -450,7 +450,7 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, isp116x_write_data32(isp116x, (u32) val); } -#define isp116x_show_reg(d,r) { \ +#define isp116x_show_reg_log(d,r,s) { \ if ((r) < 0x20) { \ DBG("%-12s[%02x]: %08x\n", #r, \ r, isp116x_read_reg32(d, r)); \ @@ -459,35 +459,60 @@ static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg, r, isp116x_read_reg16(d, r)); \ } \ } +#define isp116x_show_reg_seq(d,r,s) { \ + if ((r) < 0x20) { \ + seq_printf(s, "%-12s[%02x]: %08x\n", #r, \ + r, isp116x_read_reg32(d, r)); \ + } else { \ + seq_printf(s, "%-12s[%02x]: %04x\n", #r, \ + r, isp116x_read_reg16(d, r)); \ + } \ +} -static inline void isp116x_show_regs(struct isp116x *isp116x) +#define isp116x_show_regs(d,type,s) { \ + isp116x_show_reg_##type(d, HCREVISION, s); \ + isp116x_show_reg_##type(d, HCCONTROL, s); \ + isp116x_show_reg_##type(d, HCCMDSTAT, s); \ + isp116x_show_reg_##type(d, HCINTSTAT, s); \ + isp116x_show_reg_##type(d, HCINTENB, s); \ + isp116x_show_reg_##type(d, HCFMINTVL, s); \ + isp116x_show_reg_##type(d, HCFMREM, s); \ + isp116x_show_reg_##type(d, HCFMNUM, s); \ + isp116x_show_reg_##type(d, HCLSTHRESH, s); \ + isp116x_show_reg_##type(d, HCRHDESCA, s); \ + isp116x_show_reg_##type(d, HCRHDESCB, s); \ + isp116x_show_reg_##type(d, HCRHSTATUS, s); \ + isp116x_show_reg_##type(d, HCRHPORT1, s); \ + isp116x_show_reg_##type(d, HCRHPORT2, s); \ + isp116x_show_reg_##type(d, HCHWCFG, s); \ + isp116x_show_reg_##type(d, HCDMACFG, s); \ + isp116x_show_reg_##type(d, HCXFERCTR, s); \ + isp116x_show_reg_##type(d, HCuPINT, s); \ + isp116x_show_reg_##type(d, HCuPINTENB, s); \ + isp116x_show_reg_##type(d, HCCHIPID, s); \ + isp116x_show_reg_##type(d, HCSCRATCH, s); \ + isp116x_show_reg_##type(d, HCITLBUFLEN, s); \ + isp116x_show_reg_##type(d, HCATLBUFLEN, s); \ + isp116x_show_reg_##type(d, HCBUFSTAT, s); \ + isp116x_show_reg_##type(d, HCRDITL0LEN, s); \ + isp116x_show_reg_##type(d, HCRDITL1LEN, s); \ +} + +/* + Dump registers for debugfs. +*/ +static inline void isp116x_show_regs_seq(struct isp116x *isp116x, + struct seq_file *s) +{ + isp116x_show_regs(isp116x, seq, s); +} + +/* + Dump registers to syslog. +*/ +static inline void isp116x_show_regs_log(struct isp116x *isp116x) { - isp116x_show_reg(isp116x, HCREVISION); - isp116x_show_reg(isp116x, HCCONTROL); - isp116x_show_reg(isp116x, HCCMDSTAT); - isp116x_show_reg(isp116x, HCINTSTAT); - isp116x_show_reg(isp116x, HCINTENB); - isp116x_show_reg(isp116x, HCFMINTVL); - isp116x_show_reg(isp116x, HCFMREM); - isp116x_show_reg(isp116x, HCFMNUM); - isp116x_show_reg(isp116x, HCLSTHRESH); - isp116x_show_reg(isp116x, HCRHDESCA); - isp116x_show_reg(isp116x, HCRHDESCB); - isp116x_show_reg(isp116x, HCRHSTATUS); - isp116x_show_reg(isp116x, HCRHPORT1); - isp116x_show_reg(isp116x, HCRHPORT2); - isp116x_show_reg(isp116x, HCHWCFG); - isp116x_show_reg(isp116x, HCDMACFG); - isp116x_show_reg(isp116x, HCXFERCTR); - isp116x_show_reg(isp116x, HCuPINT); - isp116x_show_reg(isp116x, HCuPINTENB); - isp116x_show_reg(isp116x, HCCHIPID); - isp116x_show_reg(isp116x, HCSCRATCH); - isp116x_show_reg(isp116x, HCITLBUFLEN); - isp116x_show_reg(isp116x, HCATLBUFLEN); - isp116x_show_reg(isp116x, HCBUFSTAT); - isp116x_show_reg(isp116x, HCRDITL0LEN); - isp116x_show_reg(isp116x, HCRDITL1LEN); + isp116x_show_regs(isp116x, log, NULL); } #if defined(URB_TRACE) -- cgit v1.2.3-70-g09d2 From 6912354a895fcd234155273fe8838a0d83259a9b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 3 Nov 2005 11:44:49 -0500 Subject: [PATCH] USB: EHCI: fix conflation of buf == 0 with len == 0 When the ehci-hcd driver prepares a control URB, it tests for a zero-length data stage by looking at the transfer_dma value instead of the transfer_buffer_length. (In fact it does this even for non-control URBs, which is an additional aspect of the same bug.) However, under certain circumstances it's possible for transfer_dma to be 0 while transfer_buffer_length is non-zero. This can happen when a freshly allocated page (mapped to address 0 and marked Copy-On-Write, but never written to) is used as the source buffer for an OUT transfer. This patch (as598) fixes the problem. Signed-off-by: Alan Stern Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index bf03ec0d8ee..9b13bf2fa98 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -514,18 +514,18 @@ qh_urb_transaction ( qtd->urb = urb; qtd_prev->hw_next = QTD_NEXT (qtd->qtd_dma); list_add_tail (&qtd->qtd_list, head); + + /* for zero length DATA stages, STATUS is always IN */ + if (len == 0) + token |= (1 /* "in" */ << 8); } /* * data transfer stage: buffer setup */ - if (likely (len > 0)) - buf = urb->transfer_dma; - else - buf = 0; + buf = urb->transfer_dma; - /* for zero length DATA stages, STATUS is always IN */ - if (!buf || is_input) + if (is_input) token |= (1 /* "in" */ << 8); /* else it's already initted to "out" pid (0 << 8) */ @@ -572,7 +572,7 @@ qh_urb_transaction ( * control requests may need a terminating data "status" ack; * bulk ones may need a terminating short packet (zero length). */ - if (likely (buf != 0)) { + if (likely (urb->transfer_buffer_length != 0)) { int one_more = 0; if (usb_pipecontrol (urb->pipe)) { -- cgit v1.2.3-70-g09d2 From b72458a80c75cab832248f536412f386e20a93a0 Mon Sep 17 00:00:00 2001 From: matthieu castet Date: Mon, 7 Nov 2005 23:27:13 +0100 Subject: [PATCH] USB: Eagle and ADI 930 usb adsl modem driver A driver for USB ADSL modems based on the ADI eagle chipset using the usb_atm infrastructure. The managing part was taken from bsd ueagle driver, other parts were written from scratch. The driver uses the in-kernel firmware loader : - to load a first usb firmware when the modem is in pre-firmware state - to load the dsp firmware that are swapped in host memory. - to load CMV (configuration and management variables) when the modem boot. (We can't use options or sysfs for this as there many possible values. See https://mail.gna.org/public/eagleusb-dev/2005-04/msg00031.html for a description of some) - to load fpga code for 930 chipset. The device had 4 endpoints : * 2 for data (use by usbatm). The incoming endpoint could be iso or bulk. The modem seems buggy and produce lot's of atm errors when using it in bulk mode for speed > 3Mbps, so iso endpoint is need for speed > 3Mbps. At the moment iso endpoint need a patched usbatm library and for this reason is not included in this patch. * One bulk endpoint for uploading dsp firmware * One irq endpoint that notices the driver - if we need to upload a page of the dsp firmware - an ack for read or write CMV and the value (for the read case). If order to make the driver cleaner, we design synchronous (read|write)_cmv : -send a synchronous control message to the modem -wait for an ack or a timeout -return the value if needed. In order to run these synchronous usb messages we need a kernel thread. The driver has been tested with sagem fast 800 modems with different eagle chipset revision and with ADI 930 since April 2005. Signed-off-by: Matthieu CASTET Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/Kconfig | 13 + drivers/usb/atm/Makefile | 1 + drivers/usb/atm/ueagle-atm.c | 1813 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1827 insertions(+) create mode 100644 drivers/usb/atm/ueagle-atm.c (limited to 'drivers') diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index f429862e097..550ddfa71a4 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -44,6 +44,19 @@ config USB_CXACRU To compile this driver as a module, choose M here: the module will be called cxacru. +config USB_UEAGLEATM + tristate "ADI 930 and eagle USB DSL modem" + depends on USB_ATM + select FW_LOADER + help + Say Y here if you have an ADSL USB modem based on the ADI 930 + or eagle chipset. In order to use your modem you will need to + install firmwares and CMV (Command Management Variables); see + for details. + + To compile this driver as a module, choose M here: the + module will be called ueagle-atm. + config USB_XUSBATM tristate "Other USB DSL modem support" depends on USB_ATM diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile index 85099718c68..4c4a776ab1c 100644 --- a/drivers/usb/atm/Makefile +++ b/drivers/usb/atm/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o +obj-$(CONFIG_USB_UEAGLEATM) += ueagle-atm.o obj-$(CONFIG_USB_ATM) += usbatm.o obj-$(CONFIG_USB_XUSBATM) += xusbatm.o diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c new file mode 100644 index 00000000000..3e2475c666a --- /dev/null +++ b/drivers/usb/atm/ueagle-atm.c @@ -0,0 +1,1813 @@ +/*- + * Copyright (c) 2003, 2004 + * Damien Bergamini . All rights reserved. + * + * Copyright (c) 2005 Matthieu Castet + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice unmodified, this list of conditions, and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * GPL license : + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * + * HISTORY : some part of the code was base on ueagle 1.3 BSD driver, + * Damien Bergamini agree to put his code under a DUAL GPL/BSD license. + * + * The rest of the code was was rewritten from scratch. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "usbatm.h" + +#define EAGLEUSBVERSION "ueagle 1.1" + + +/* + * Debug macros + */ +#define uea_dbg(usb_dev, format, args...) \ + do { \ + if (debug >= 1) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm dbg] %s: " format, \ + __FUNCTION__, ##args); \ + } while (0) + +#define uea_vdbg(usb_dev, format, args...) \ + do { \ + if (debug >= 2) \ + dev_dbg(&(usb_dev)->dev, \ + "[ueagle-atm vdbg] " format, ##args); \ + } while (0) + +#define uea_enters(usb_dev) \ + uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__) + +#define uea_leaves(usb_dev) \ + uea_vdbg(usb_dev, "leaving %s\n", __FUNCTION__) + +#define uea_err(usb_dev, format,args...) \ + dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args) + +#define uea_warn(usb_dev, format,args...) \ + dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args) + +#define uea_info(usb_dev, format,args...) \ + dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args) + +struct uea_cmvs { + u32 address; + u16 offset; + u32 data; +} __attribute__ ((packed)); + +struct uea_softc { + struct usb_device *usb_dev; + struct usbatm_data *usbatm; + + int modem_index; + unsigned int driver_info; + + int booting; + int reset; + + wait_queue_head_t sync_q; + + struct task_struct *kthread; + u32 data; + wait_queue_head_t cmv_ack_wait; + int cmv_ack; + + struct work_struct task; + u16 pageno; + u16 ovl; + + const struct firmware *dsp_firm; + struct urb *urb_int; + + u8 cmv_function; + u16 cmv_idx; + u32 cmv_address; + u16 cmv_offset; + + /* keep in sync with eaglectl */ + struct uea_stats { + struct { + u32 state; + u32 flags; + u32 mflags; + u32 vidcpe; + u32 vidco; + u32 dsrate; + u32 usrate; + u32 dsunc; + u32 usunc; + u32 dscorr; + u32 uscorr; + u32 txflow; + u32 rxflow; + u32 usattenuation; + u32 dsattenuation; + u32 dsmargin; + u32 usmargin; + u32 firmid; + } phy; + } stats; +}; + +/* + * Elsa IDs + */ +#define ELSA_VID 0x05CC +#define ELSA_PID_PSTFIRM 0x3350 +#define ELSA_PID_PREFIRM 0x3351 + +/* + * Sagem USB IDs + */ +#define EAGLE_VID 0x1110 +#define EAGLE_I_PID_PREFIRM 0x9010 /* Eagle I */ +#define EAGLE_I_PID_PSTFIRM 0x900F /* Eagle I */ + +#define EAGLE_IIC_PID_PREFIRM 0x9024 /* Eagle IIC */ +#define EAGLE_IIC_PID_PSTFIRM 0x9023 /* Eagle IIC */ + +#define EAGLE_II_PID_PREFIRM 0x9022 /* Eagle II */ +#define EAGLE_II_PID_PSTFIRM 0x9021 /* Eagle II */ + +/* + * Eagle III Pid + */ +#define EAGLE_III_PID_PREFIRM 0x9032 /* Eagle III */ +#define EAGLE_III_PID_PSTFIRM 0x9031 /* Eagle III */ + +/* + * USR USB IDs + */ +#define USR_VID 0x0BAF +#define MILLER_A_PID_PREFIRM 0x00F2 +#define MILLER_A_PID_PSTFIRM 0x00F1 +#define MILLER_B_PID_PREFIRM 0x00FA +#define MILLER_B_PID_PSTFIRM 0x00F9 +#define HEINEKEN_A_PID_PREFIRM 0x00F6 +#define HEINEKEN_A_PID_PSTFIRM 0x00F5 +#define HEINEKEN_B_PID_PREFIRM 0x00F8 +#define HEINEKEN_B_PID_PSTFIRM 0x00F7 + +#define PREFIRM 0 +#define PSTFIRM (1<<7) +enum { + ADI930 = 0, + EAGLE_I, + EAGLE_II, + EAGLE_III +}; + +/* macros for both struct usb_device_id and struct uea_softc */ +#define UEA_IS_PREFIRM(x) \ + (!((x)->driver_info & PSTFIRM)) +#define UEA_CHIP_VERSION(x) \ + ((x)->driver_info & 0xf) + +#define IS_ISDN(sc) \ + (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80) + +#define INS_TO_USBDEV(ins) ins->usb_dev + +#define GET_STATUS(data) \ + ((data >> 8) & 0xf) +#define IS_OPERATIONAL(sc) \ + (GET_STATUS(sc->stats.phy.state) == 2) + +/* + * Set of macros to handle unaligned data in the firmware blob. + * The FW_GET_BYTE() macro is provided only for consistency. + */ + +#define FW_GET_BYTE(p) *((__u8 *) (p)) +#define FW_GET_WORD(p) le16_to_cpu(get_unaligned((__le16 *) (p))) +#define FW_GET_LONG(p) le32_to_cpu(get_unaligned((__le32 *) (p))) + +#define FW_DIR "ueagle-atm/" +#define NB_MODEM 4 + +#define BULK_TIMEOUT 300 +#define CTRL_TIMEOUT 1000 + +#define ACK_TIMEOUT msecs_to_jiffies(1500) + +#define UEA_INTR_IFACE_NO 0 +#define UEA_US_IFACE_NO 1 +#define UEA_DS_IFACE_NO 2 + +#define FASTEST_ISO_INTF 8 + +#define UEA_BULK_DATA_PIPE 0x02 +#define UEA_IDMA_PIPE 0x04 +#define UEA_INTR_PIPE 0x04 +#define UEA_ISO_DATA_PIPE 0x08 + +#define UEA_SET_BLOCK 0x0001 +#define UEA_SET_MODE 0x0003 +#define UEA_SET_2183_DATA 0x0004 +#define UEA_SET_TIMEOUT 0x0011 + +#define UEA_LOOPBACK_OFF 0x0002 +#define UEA_LOOPBACK_ON 0x0003 +#define UEA_BOOT_IDMA 0x0006 +#define UEA_START_RESET 0x0007 +#define UEA_END_RESET 0x0008 + +#define UEA_SWAP_MAILBOX (0x3fcd | 0x4000) +#define UEA_MPTX_START (0x3fce | 0x4000) +#define UEA_MPTX_MAILBOX (0x3fd6 | 0x4000) +#define UEA_MPRX_MAILBOX (0x3fdf | 0x4000) + +/* structure describing a block within a DSP page */ +struct block_info { + __le16 wHdr; +#define UEA_BIHDR 0xabcd + __le16 wAddress; + __le16 wSize; + __le16 wOvlOffset; + __le16 wOvl; /* overlay */ + __le16 wLast; +} __attribute__ ((packed)); +#define BLOCK_INFO_SIZE 12 + +/* structure representing a CMV (Configuration and Management Variable) */ +struct cmv { + __le16 wPreamble; +#define PREAMBLE 0x535c + __u8 bDirection; +#define MODEMTOHOST 0x01 +#define HOSTTOMODEM 0x10 + __u8 bFunction; +#define FUNCTION_TYPE(f) ((f) >> 4) +#define MEMACCESS 0x1 +#define ADSLDIRECTIVE 0x7 + +#define FUNCTION_SUBTYPE(f) ((f) & 0x0f) +/* for MEMACCESS */ +#define REQUESTREAD 0x0 +#define REQUESTWRITE 0x1 +#define REPLYREAD 0x2 +#define REPLYWRITE 0x3 +/* for ADSLDIRECTIVE */ +#define KERNELREADY 0x0 +#define MODEMREADY 0x1 + +#define MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf)) + __le16 wIndex; + __le32 dwSymbolicAddress; +#define MAKESA(a, b, c, d) \ + (((c) & 0xff) << 24 | \ + ((d) & 0xff) << 16 | \ + ((a) & 0xff) << 8 | \ + ((b) & 0xff)) + +#define SA_CNTL MAKESA('C', 'N', 'T', 'L') +#define SA_DIAG MAKESA('D', 'I', 'A', 'G') +#define SA_INFO MAKESA('I', 'N', 'F', 'O') +#define SA_OPTN MAKESA('O', 'P', 'T', 'N') +#define SA_RATE MAKESA('R', 'A', 'T', 'E') +#define SA_STAT MAKESA('S', 'T', 'A', 'T') + __le16 wOffsetAddress; + __le32 dwData; +} __attribute__ ((packed)); +#define CMV_SIZE 16 + +/* structure representing swap information */ +struct swap_info { + __u8 bSwapPageNo; + __u8 bOvl; /* overlay */ +} __attribute__ ((packed)); + +/* structure representing interrupt data */ +struct intr_pkt { + __u8 bType; + __u8 bNotification; + __le16 wValue; + __le16 wIndex; + __le16 wLength; + __le16 wInterrupt; +#define INT_LOADSWAPPAGE 0x0001 +#define INT_INCOMINGCMV 0x0002 + union { + struct { + struct swap_info swapinfo; + __le16 wDataSize; + } __attribute__ ((packed)) s1; + + struct { + struct cmv cmv; + __le16 wDataSize; + } __attribute__ ((packed)) s2; + } __attribute__ ((packed)) u; +#define bSwapPageNo u.s1.swapinfo.bSwapPageNo +#define bOvl u.s1.swapinfo.bOvl +} __attribute__ ((packed)); +#define INTR_PKT_SIZE 28 + +static struct usb_driver uea_driver; +static DECLARE_MUTEX(uea_semaphore); +static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"}; + +static int modem_index; +static unsigned int debug; +static int sync_wait[NB_MODEM]; +static char *cmv_file[NB_MODEM]; + +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)"); +module_param_array(sync_wait, bool, NULL, 0644); +MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM"); +module_param_array(cmv_file, charp, NULL, 0644); +MODULE_PARM_DESC(cmv_file, + "file name with configuration and management variables"); + +#define UPDATE_ATM_STAT(type, val) \ + do { \ + if (sc->usbatm->atm_dev) \ + sc->usbatm->atm_dev->type = val; \ + } while (0) + +/* Firmware loading */ +#define LOAD_INTERNAL 0xA0 +#define F8051_USBCS 0x7f92 + +/** + * uea_send_modem_cmd - Send a command for pre-firmware devices. + */ +static int uea_send_modem_cmd(struct usb_device *usb, + u16 addr, u16 size, u8 * buff) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (xfer_buff) { + memcpy(xfer_buff, buff, size); + ret = usb_control_msg(usb, + usb_sndctrlpipe(usb, 0), + LOAD_INTERNAL, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, addr, 0, xfer_buff, + size, CTRL_TIMEOUT); + kfree(xfer_buff); + } + + if (ret < 0) + return ret; + + return (ret == size) ? 0 : -EIO; +} + +static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context) +{ + struct usb_device *usb = context; + u8 *pfw, value; + u32 crc = 0; + int ret, size; + + uea_enters(usb); + if (!fw_entry) { + uea_err(usb, "firmware is not available\n"); + goto err; + } + + pfw = fw_entry->data; + size = fw_entry->size; + + crc = FW_GET_LONG(pfw); + pfw += 4; + size -= 4; + if (crc32_be(0, pfw, size) != crc) { + uea_err(usb, "firmware is corrupted\n"); + goto err; + } + + /* + * Start to upload formware : send reset + */ + value = 1; + ret = uea_send_modem_cmd(usb, F8051_USBCS, sizeof(value), &value); + + if (ret < 0) { + uea_err(usb, "modem reset failed with error %d\n", ret); + goto err; + } + + while (size > 0) { + u8 len = FW_GET_BYTE(pfw); + u16 add = FW_GET_WORD(pfw + 1); + ret = uea_send_modem_cmd(usb, add, len, pfw + 3); + if (ret < 0) { + uea_err(usb, "uploading firmware data failed " + "with error %d\n", ret); + goto err; + } + pfw += len + 3; + size -= len + 3; + } + + /* + * Tell the modem we finish : de-assert reset + */ + value = 0; + ret = uea_send_modem_cmd(usb, F8051_USBCS, 1, &value); + if (ret < 0) + uea_err(usb, "modem de-assert failed with error %d\n", ret); + else + uea_info(usb, "firmware uploaded\n"); + +err: + uea_leaves(usb); +} + +/** + * uea_load_firmware - Load usb firmware for pre-firmware devices. + */ +static int uea_load_firmware(struct usb_device *usb, unsigned int ver) +{ + int ret; + char *fw_name = FW_DIR "eagle.fw"; + + uea_enters(usb); + uea_info(usb, "pre-firmware device, uploading firmware\n"); + + switch (ver) { + case ADI930: + fw_name = FW_DIR "adi930.fw"; + break; + case EAGLE_I: + fw_name = FW_DIR "eagleI.fw"; + break; + case EAGLE_II: + fw_name = FW_DIR "eagleII.fw"; + break; + case EAGLE_III: + fw_name = FW_DIR "eagleIII.fw"; + break; + } + + ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev, usb, uea_upload_pre_firmware); + if (ret) + uea_err(usb, "firmware %s is not available\n", fw_name); + else + uea_info(usb, "loading firmware %s\n", fw_name); + + uea_leaves(usb); + return ret; +} + +/* modem management : dsp firmware, send/read CMV, monitoring statistic + */ + +/* + * Make sure that the DSP code provided is safe to use. + */ +static int check_dsp(u8 *dsp, unsigned int len) +{ + u8 pagecount, blockcount; + u16 blocksize; + u32 pageoffset; + unsigned int i, j, p, pp; + + /* enough space for pagecount? */ + if (len < 1) + return 1; + + pagecount = FW_GET_BYTE(dsp); + p = 1; + + /* enough space for page offsets? */ + if (p + 4 * pagecount > len) + return 1; + + for (i = 0; i < pagecount; i++) { + + pageoffset = FW_GET_LONG(dsp + p); + p += 4; + + if (pageoffset == 0) + continue; + + /* enough space for blockcount? */ + if (pageoffset >= len) + return 1; + + pp = pageoffset; + blockcount = FW_GET_BYTE(dsp + pp); + pp += 1; + + for (j = 0; j < blockcount; j++) { + + /* enough space for block header? */ + if (pp + 4 > len) + return 1; + + pp += 2; /* skip blockaddr */ + blocksize = FW_GET_WORD(dsp + pp); + pp += 2; + + /* enough space for block data? */ + if (pp + blocksize > len) + return 1; + + pp += blocksize; + } + } + + return 0; +} + +/* + * send data to the idma pipe + * */ +static int uea_idma_write(struct uea_softc *sc, void *data, u32 size) +{ + int ret = -ENOMEM; + u8 *xfer_buff; + int bytes_read; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + + memcpy(xfer_buff, data, size); + + ret = usb_bulk_msg(sc->usb_dev, + usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE), + xfer_buff, size, &bytes_read, BULK_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) + return ret; + if (size != bytes_read) { + uea_err(INS_TO_USBDEV(sc), "size != bytes_read %d %d\n", size, + bytes_read); + return -EIO; + } + + return 0; +} + +static int request_dsp(struct uea_softc *sc) +{ + int ret; + char *dsp_name; + + if (UEA_CHIP_VERSION(sc) == ADI930) { + if (IS_ISDN(sc)) + dsp_name = FW_DIR "DSP9i.bin"; + else + dsp_name = FW_DIR "DSP9p.bin"; + } else { + if (IS_ISDN(sc)) + dsp_name = FW_DIR "DSPei.bin"; + else + dsp_name = FW_DIR "DSPep.bin"; + } + + ret = request_firmware(&sc->dsp_firm, + dsp_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + dsp_name, ret); + return ret; + } + + if (check_dsp(sc->dsp_firm->data, sc->dsp_firm->size)) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + dsp_name); + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + return -EILSEQ; + } + + return 0; +} + +/* + * The uea_load_page() function must be called within a process context + */ +static void uea_load_page(void *xsc) +{ + struct uea_softc *sc = xsc; + u16 pageno = sc->pageno; + u16 ovl = sc->ovl; + struct block_info bi; + + u8 *p; + u8 pagecount, blockcount; + u16 blockaddr, blocksize; + u32 pageoffset; + int i; + + /* reload firmware when reboot start and it's loaded already */ + if (ovl == 0 && pageno == 0 && sc->dsp_firm) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + if (sc->dsp_firm == NULL && request_dsp(sc) < 0) + return; + + p = sc->dsp_firm->data; + pagecount = FW_GET_BYTE(p); + p += 1; + + if (pageno >= pagecount) + goto bad1; + + p += 4 * pageno; + pageoffset = FW_GET_LONG(p); + + if (pageoffset == 0) + goto bad1; + + p = sc->dsp_firm->data + pageoffset; + blockcount = FW_GET_BYTE(p); + p += 1; + + uea_dbg(INS_TO_USBDEV(sc), + "sending %u blocks for DSP page %u\n", blockcount, pageno); + + bi.wHdr = cpu_to_le16(UEA_BIHDR); + bi.wOvl = cpu_to_le16(ovl); + bi.wOvlOffset = cpu_to_le16(ovl | 0x8000); + + for (i = 0; i < blockcount; i++) { + blockaddr = FW_GET_WORD(p); + p += 2; + + blocksize = FW_GET_WORD(p); + p += 2; + + bi.wSize = cpu_to_le16(blocksize); + bi.wAddress = cpu_to_le16(blockaddr); + bi.wLast = cpu_to_le16((i == blockcount - 1) ? 1 : 0); + + /* send block info through the IDMA pipe */ + if (uea_idma_write(sc, &bi, BLOCK_INFO_SIZE)) + goto bad2; + + /* send block data through the IDMA pipe */ + if (uea_idma_write(sc, p, blocksize)) + goto bad2; + + p += blocksize; + } + + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i); + return; +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno); +} + +static inline void wake_up_cmv_ack(struct uea_softc *sc) +{ + sc->cmv_ack = 1; + wake_up(&sc->cmv_ack_wait); +} + +static inline int wait_cmv_ack(struct uea_softc *sc) +{ + int ret = wait_event_timeout(sc->cmv_ack_wait, + sc->cmv_ack, ACK_TIMEOUT); + sc->cmv_ack = 0; + + if (ret < 0) + return ret; + + return (ret == 0) ? -ETIMEDOUT : 0; + +} + +#define UCDC_SEND_ENCAPSULATED_COMMAND 0x00 + +static int uea_request(struct uea_softc *sc, + u16 value, u16 index, u16 size, void *data) +{ + u8 *xfer_buff; + int ret = -ENOMEM; + + xfer_buff = kmalloc(size, GFP_KERNEL); + if (!xfer_buff) { + uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n"); + return ret; + } + memcpy(xfer_buff, data, size); + + ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0), + UCDC_SEND_ENCAPSULATED_COMMAND, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, xfer_buff, size, CTRL_TIMEOUT); + + kfree(xfer_buff); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), "usb_control_msg error %d\n", ret); + return ret; + } + + if (ret != size) { + uea_err(INS_TO_USBDEV(sc), + "usb_control_msg send only %d bytes (instead of %d)\n", + ret, size); + return -EIO; + } + + return 0; +} + +static int uea_cmv(struct uea_softc *sc, + u8 function, u32 address, u16 offset, u32 data) +{ + struct cmv cmv; + int ret; + + /* we send a request, but we expect a reply */ + sc->cmv_function = function | 0x2; + sc->cmv_idx++; + sc->cmv_address = address; + sc->cmv_offset = offset; + + cmv.wPreamble = cpu_to_le16(PREAMBLE); + cmv.bDirection = HOSTTOMODEM; + cmv.bFunction = function; + cmv.wIndex = cpu_to_le16(sc->cmv_idx); + put_unaligned(cpu_to_le32(address), &cmv.dwSymbolicAddress); + cmv.wOffsetAddress = cpu_to_le16(offset); + put_unaligned(cpu_to_le32(data >> 16 | data << 16), &cmv.dwData); + + ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv); + if (ret < 0) + return ret; + return wait_cmv_ack(sc); +} + +static inline int uea_read_cmv(struct uea_softc *sc, + u32 address, u16 offset, u32 *data) +{ + int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTREAD), + address, offset, 0); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "reading cmv failed with error %d\n", ret); + else + *data = sc->data; + + return ret; +} + +static inline int uea_write_cmv(struct uea_softc *sc, + u32 address, u16 offset, u32 data) +{ + int ret = uea_cmv(sc, MAKEFUNCTION(MEMACCESS, REQUESTWRITE), + address, offset, data); + if (ret < 0) + uea_err(INS_TO_USBDEV(sc), + "writing cmv failed with error %d\n", ret); + + return ret; +} + +/* + * Monitor the modem and update the stat + * return 0 if everything is ok + * return < 0 if an error occurs (-EAGAIN reboot needed) + */ +static int uea_stat(struct uea_softc *sc) +{ + u32 data; + int ret; + + uea_enters(INS_TO_USBDEV(sc)); + data = sc->stats.phy.state; + + ret = uea_read_cmv(sc, SA_STAT, 0, &sc->stats.phy.state); + if (ret < 0) + return ret; + + switch (GET_STATUS(sc->stats.phy.state)) { + case 0: /* not yet synchronized */ + uea_dbg(INS_TO_USBDEV(sc), + "modem not yet synchronized\n"); + return 0; + + case 1: /* initialization */ + uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n"); + return 0; + + case 2: /* operational */ + uea_vdbg(INS_TO_USBDEV(sc), "modem operational\n"); + break; + + case 3: /* fail ... */ + uea_info(INS_TO_USBDEV(sc), "modem synchronization failed\n"); + return -EAGAIN; + + case 4 ... 6: /* test state */ + uea_warn(INS_TO_USBDEV(sc), + "modem in test mode - not supported\n"); + return -EAGAIN; + + case 7: /* fast-retain ... */ + uea_info(INS_TO_USBDEV(sc), "modem in fast-retain mode\n"); + return 0; + default: + uea_err(INS_TO_USBDEV(sc), "modem invalid SW mode %d\n", + GET_STATUS(sc->stats.phy.state)); + return -EAGAIN; + } + + if (GET_STATUS(data) != 2) { + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_OFF, 0, NULL); + uea_info(INS_TO_USBDEV(sc), "modem operational\n"); + + /* release the dsp firmware as it is not needed until + * the next failure + */ + if (sc->dsp_firm) { + release_firmware(sc->dsp_firm); + sc->dsp_firm = NULL; + } + + ret = uea_read_cmv(sc, SA_INFO, 10, &sc->stats.phy.firmid); + if (ret < 0) + return ret; + uea_info(INS_TO_USBDEV(sc), "ATU-R firmware version : %x\n", + sc->stats.phy.firmid); + } + + /* always update it as atm layer could not be init when we switch to + * operational state + */ + UPDATE_ATM_STAT(signal, ATM_PHY_SIG_FOUND); + + /* wake up processes waiting for synchronization */ + wake_up(&sc->sync_q); + + ret = uea_read_cmv(sc, SA_DIAG, 2, &sc->stats.phy.flags); + if (ret < 0) + return ret; + sc->stats.phy.mflags |= sc->stats.phy.flags; + + /* in case of a flags ( for example delineation LOSS (& 0x10)), + * we check the status again in order to detect the failure earlier + */ + if (sc->stats.phy.flags) { + uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n", + sc->stats.phy.flags); + return 0; + } + + ret = uea_read_cmv(sc, SA_RATE, 0, &data); + if (ret < 0) + return ret; + + /* in bulk mode the modem have problem with high rate + * changing internal timing could improve things, but the + * value is misterious. + * ADI930 don't support it (-EPIPE error). + */ + if (UEA_CHIP_VERSION(sc) != ADI930 + && sc->stats.phy.dsrate != (data >> 16) * 32) { + /* Original timming from ADI(used in windows driver) + * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits + */ + u16 timeout = (data <= 0x20ffff) ? 0 : 1; + ret = uea_request(sc, UEA_SET_TIMEOUT, timeout, 0, NULL); + uea_info(INS_TO_USBDEV(sc), + "setting new timeout %d%s\n", timeout, + ret < 0?" failed":""); + } + sc->stats.phy.dsrate = (data >> 16) * 32; + sc->stats.phy.usrate = (data & 0xffff) * 32; + UPDATE_ATM_STAT(link_rate, sc->stats.phy.dsrate * 1000 / 424); + + ret = uea_read_cmv(sc, SA_DIAG, 23, &data); + if (ret < 0) + return ret; + sc->stats.phy.dsattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv(sc, SA_DIAG, 47, &data); + if (ret < 0) + return ret; + sc->stats.phy.usattenuation = (data & 0xff) / 2; + + ret = uea_read_cmv(sc, SA_DIAG, 25, &sc->stats.phy.dsmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 49, &sc->stats.phy.usmargin); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 51, &sc->stats.phy.rxflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 52, &sc->stats.phy.txflow); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 54, &sc->stats.phy.dsunc); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv(sc, SA_DIAG, 58, &sc->stats.phy.usunc); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_DIAG, 53, &sc->stats.phy.dscorr); + if (ret < 0) + return ret; + + /* only for atu-c */ + ret = uea_read_cmv(sc, SA_DIAG, 57, &sc->stats.phy.uscorr); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_INFO, 8, &sc->stats.phy.vidco); + if (ret < 0) + return ret; + + ret = uea_read_cmv(sc, SA_INFO, 13, &sc->stats.phy.vidcpe); + if (ret < 0) + return ret; + + return 0; +} + +static int request_cmvs(struct uea_softc *sc, + struct uea_cmvs **cmvs, const struct firmware **fw) +{ + int ret, size; + u8 *data; + char *file; + static char cmv_name[256] = FW_DIR; + + if (cmv_file[sc->modem_index] == NULL) { + if (UEA_CHIP_VERSION(sc) == ADI930) + file = (IS_ISDN(sc)) ? "CMV9i.bin" : "CMV9p.bin"; + else + file = (IS_ISDN(sc)) ? "CMVei.bin" : "CMVep.bin"; + } else + file = cmv_file[sc->modem_index]; + + strcpy(cmv_name, FW_DIR); + strlcat(cmv_name, file, sizeof(cmv_name)); + + ret = request_firmware(fw, cmv_name, &sc->usb_dev->dev); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "requesting firmware %s failed with error %d\n", + cmv_name, ret); + return ret; + } + + data = (u8 *) (*fw)->data; + size = *data * sizeof(struct uea_cmvs) + 1; + if (size != (*fw)->size) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + cmv_name); + release_firmware(*fw); + return -EILSEQ; + } + + *cmvs = (struct uea_cmvs *)(data + 1); + return *data; +} + +/* Start boot post firmware modem: + * - send reset commands through usb control pipe + * - start workqueue for DSP loading + * - send CMV options to modem + */ + +static int uea_start_reset(struct uea_softc *sc) +{ + u16 zero = 0; /* ;-) */ + int i, len, ret; + struct uea_cmvs *cmvs; + const struct firmware *cmvs_fw; + + uea_enters(INS_TO_USBDEV(sc)); + uea_info(INS_TO_USBDEV(sc), "(re)booting started\n"); + + sc->booting = 1; + UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST); + + /* reset statistics */ + memset(&sc->stats, 0, sizeof(struct uea_stats)); + + /* tell the modem that we want to boot in IDMA mode */ + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL); + + /* enter reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL); + + /* original driver use 200ms, but windows driver use 100ms */ + msleep(100); + + /* leave reset mode */ + uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL); + + /* clear tx and rx mailboxes */ + uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero); + uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero); + + msleep(1000); + sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY); + sc->booting = 0; + + /* start loading DSP */ + sc->pageno = 0; + sc->ovl = 0; + schedule_work(&sc->task); + + /* wait for modem ready CMV */ + ret = wait_cmv_ack(sc); + if (ret < 0) + return ret; + + /* Enter in R-IDLE (cmv) until instructed otherwise */ + ret = uea_write_cmv(sc, SA_CNTL, 0, 1); + if (ret < 0) + return ret; + + /* get options */ + ret = len = request_cmvs(sc, &cmvs, &cmvs_fw); + if (ret < 0) + return ret; + + /* send options */ + for (i = 0; i < len; i++) { + ret = uea_write_cmv(sc, FW_GET_LONG(&cmvs[i].address), + FW_GET_WORD(&cmvs[i].offset), + FW_GET_LONG(&cmvs[i].data)); + if (ret < 0) + goto out; + } + /* Enter in R-ACT-REQ */ + ret = uea_write_cmv(sc, SA_CNTL, 0, 2); +out: + release_firmware(cmvs_fw); + sc->reset = 0; + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* + * In case of an error wait 1s before rebooting the modem + * if the modem don't request reboot (-EAGAIN). + * Monitor the modem every 1s. + */ + +static int uea_kthread(void *data) +{ + struct uea_softc *sc = data; + int ret = -EAGAIN; + + uea_enters(INS_TO_USBDEV(sc)); + while (!kthread_should_stop()) { + if (ret < 0 || sc->reset) + ret = uea_start_reset(sc); + if (!ret) + ret = uea_stat(sc); + if (ret != -EAGAIN) + msleep(1000); + } + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +/* Load second usb firmware for ADI930 chip */ +static int load_XILINX_firmware(struct uea_softc *sc) +{ + const struct firmware *fw_entry; + int ret, size, u, ln; + u8 *pfw, value; + char *fw_name = FW_DIR "930-fpga.bin"; + + uea_enters(INS_TO_USBDEV(sc)); + + ret = request_firmware(&fw_entry, fw_name, &sc->usb_dev->dev); + if (ret) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is not available\n", + fw_name); + goto err0; + } + + pfw = fw_entry->data; + size = fw_entry->size; + if (size != 0x577B) { + uea_err(INS_TO_USBDEV(sc), "firmware %s is corrupted\n", + fw_name); + ret = -EILSEQ; + goto err1; + } + for (u = 0; u < size; u += ln) { + ln = min(size - u, 64); + ret = uea_request(sc, 0xe, 0, ln, pfw + u); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + } + + /* finish to send the fpga + */ + ret = uea_request(sc, 0xe, 1, 0, NULL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "elsa download data failed (%d)\n", ret); + goto err1; + } + + /* + * Tell the modem we finish : de-assert reset + */ + value = 0; + ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value); + if (ret < 0) + uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret); + + +err1: + release_firmware(fw_entry); +err0: + uea_leaves(INS_TO_USBDEV(sc)); + return ret; +} + +static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv) +{ + uea_enters(INS_TO_USBDEV(sc)); + if (le16_to_cpu(cmv->wPreamble) != PREAMBLE) + goto bad1; + + if (cmv->bDirection != MODEMTOHOST) + goto bad1; + + /* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to + * the first MEMACESS cmv. Ignore it... + */ + if (cmv->bFunction != sc->cmv_function) { + if (UEA_CHIP_VERSION(sc) == ADI930 + && cmv->bFunction == MAKEFUNCTION(2, 2)) { + cmv->wIndex = cpu_to_le16(sc->cmv_idx); + put_unaligned(cpu_to_le32(sc->cmv_address), &cmv->dwSymbolicAddress); + cmv->wOffsetAddress = cpu_to_le16(sc->cmv_offset); + } + else + goto bad2; + } + + if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) { + wake_up_cmv_ack(sc); + return; + } + + /* in case of MEMACCESS */ + if (le16_to_cpu(cmv->wIndex) != sc->cmv_idx || + le32_to_cpu(get_unaligned(&cmv->dwSymbolicAddress)) != + sc->cmv_address + || le16_to_cpu(cmv->wOffsetAddress) != sc->cmv_offset) + goto bad2; + + sc->data = le32_to_cpu(get_unaligned(&cmv->dwData)); + sc->data = sc->data << 16 | sc->data >> 16; + + wake_up_cmv_ack(sc); + return; + +bad2: + uea_err(INS_TO_USBDEV(sc), "unexpected cmv received," + "Function : %d, Subfunction : %d\n", + FUNCTION_TYPE(cmv->bFunction), + FUNCTION_SUBTYPE(cmv->bFunction)); + return; + +bad1: + uea_err(INS_TO_USBDEV(sc), "invalid cmv received, " + "wPreamble %d, bDirection %d\n", + le16_to_cpu(cmv->wPreamble), cmv->bDirection); +} + +/* + * interrupt handler + */ +static void uea_intr(struct urb *urb, struct pt_regs *regs) +{ + struct uea_softc *sc = (struct uea_softc *)urb->context; + struct intr_pkt *intr; + uea_enters(INS_TO_USBDEV(sc)); + + if (urb->status < 0) { + uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n", + urb->status); + return; + } + + intr = (struct intr_pkt *) urb->transfer_buffer; + + /* device-to-host interrupt */ + if (intr->bType != 0x08 || sc->booting) { + uea_err(INS_TO_USBDEV(sc), "wrong intr\n"); + // rebooting ? + // sc->reset = 1; + goto resubmit; + } + + switch (le16_to_cpu(intr->wInterrupt)) { + case INT_LOADSWAPPAGE: + sc->pageno = intr->bSwapPageNo; + sc->ovl = intr->bOvl >> 4 | intr->bOvl << 4; + schedule_work(&sc->task); + break; + + case INT_INCOMINGCMV: + uea_dispatch_cmv(sc, &intr->u.s2.cmv); + break; + + default: + uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n", + le16_to_cpu(intr->wInterrupt)); + } + +resubmit: + usb_submit_urb(sc->urb_int, GFP_ATOMIC); +} + +/* + * Start the modem : init the data and start kernel thread + */ +static int uea_boot(struct uea_softc *sc) +{ + int ret; + struct intr_pkt *intr; + + uea_enters(INS_TO_USBDEV(sc)); + + INIT_WORK(&sc->task, uea_load_page, sc); + init_waitqueue_head(&sc->sync_q); + init_waitqueue_head(&sc->cmv_ack_wait); + + if (UEA_CHIP_VERSION(sc) == ADI930) + load_XILINX_firmware(sc); + + intr = kmalloc(INTR_PKT_SIZE, GFP_KERNEL); + if (!intr) { + uea_err(INS_TO_USBDEV(sc), + "cannot allocate interrupt package\n"); + uea_leaves(INS_TO_USBDEV(sc)); + return -ENOMEM; + } + + sc->urb_int = usb_alloc_urb(0, GFP_KERNEL); + if (!sc->urb_int) { + uea_err(INS_TO_USBDEV(sc), "cannot allocate interrupt URB\n"); + goto err; + } + + usb_fill_int_urb(sc->urb_int, sc->usb_dev, + usb_rcvintpipe(sc->usb_dev, UEA_INTR_PIPE), + intr, INTR_PKT_SIZE, uea_intr, sc, + sc->usb_dev->actconfig->interface[0]->altsetting[0]. + endpoint[0].desc.bInterval); + + ret = usb_submit_urb(sc->urb_int, GFP_KERNEL); + if (ret < 0) { + uea_err(INS_TO_USBDEV(sc), + "urb submition failed with error %d\n", ret); + goto err1; + } + + sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm"); + if (sc->kthread == ERR_PTR(-ENOMEM)) { + uea_err(INS_TO_USBDEV(sc), "failed to create thread\n"); + goto err2; + } + + uea_leaves(INS_TO_USBDEV(sc)); + return 0; + +err2: + usb_kill_urb(sc->urb_int); +err1: + kfree(intr); +err: + usb_free_urb(sc->urb_int); + uea_leaves(INS_TO_USBDEV(sc)); + return -ENOMEM; +} + +/* + * Stop the modem : kill kernel thread and free data + */ +static void uea_stop(struct uea_softc *sc) +{ + int ret; + uea_enters(INS_TO_USBDEV(sc)); + ret = kthread_stop(sc->kthread); + uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret); + + /* stop any pending boot process */ + flush_scheduled_work(); + + uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL); + + usb_kill_urb(sc->urb_int); + kfree(sc->urb_int->transfer_buffer); + usb_free_urb(sc->urb_int); + + if (sc->dsp_firm) + release_firmware(sc->dsp_firm); + uea_leaves(INS_TO_USBDEV(sc)); +} + +/* syfs interface */ +static struct uea_softc *dev_to_uea(struct device *dev) +{ + struct usb_interface *intf; + struct usbatm_data *usbatm; + + intf = to_usb_interface(dev); + if (!intf) + return NULL; + + usbatm = usb_get_intfdata(intf); + if (!usbatm) + return NULL; + + return usbatm->driver_data; +} + +static ssize_t read_status(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state); +out: + up(&uea_semaphore); + return ret; +} + +static ssize_t reboot(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + sc->reset = 1; + ret = count; +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot); + +static ssize_t read_human_status(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + switch (GET_STATUS(sc->stats.phy.state)) { + case 0: + ret = sprintf(buf, "Modem is booting\n"); + break; + case 1: + ret = sprintf(buf, "Modem is initializing\n"); + break; + case 2: + ret = sprintf(buf, "Modem is operational\n"); + break; + default: + ret = sprintf(buf, "Modem synchronization failed\n"); + break; + } +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL); + +static ssize_t read_delin(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret = -ENODEV; + struct uea_softc *sc; + + down(&uea_semaphore); + sc = dev_to_uea(dev); + if (!sc) + goto out; + + if (sc->stats.phy.flags & 0x0C00) + ret = sprintf(buf, "ERROR\n"); + else if (sc->stats.phy.flags & 0x0030) + ret = sprintf(buf, "LOSS\n"); + else + ret = sprintf(buf, "GOOD\n"); +out: + up(&uea_semaphore); + return ret; +} + +static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL); + +#define UEA_ATTR(name, reset) \ + \ +static ssize_t read_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + int ret = -ENODEV; \ + struct uea_softc *sc; \ + \ + down(&uea_semaphore); \ + sc = dev_to_uea(dev); \ + if (!sc) \ + goto out; \ + ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name); \ + if (reset) \ + sc->stats.phy.name = 0; \ +out: \ + up(&uea_semaphore); \ + return ret; \ +} \ + \ +static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL) + +UEA_ATTR(mflags, 1); +UEA_ATTR(vidcpe, 0); +UEA_ATTR(usrate, 0); +UEA_ATTR(dsrate, 0); +UEA_ATTR(usattenuation, 0); +UEA_ATTR(dsattenuation, 0); +UEA_ATTR(usmargin, 0); +UEA_ATTR(dsmargin, 0); +UEA_ATTR(txflow, 0); +UEA_ATTR(rxflow, 0); +UEA_ATTR(uscorr, 0); +UEA_ATTR(dscorr, 0); +UEA_ATTR(usunc, 0); +UEA_ATTR(dsunc, 0); + +/* Retrieve the device End System Identifier (MAC) */ + +#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10) +static int uea_getesi(struct uea_softc *sc, u_char * esi) +{ + unsigned char mac_str[2 * ETH_ALEN + 1]; + int i; + if (usb_string + (sc->usb_dev, sc->usb_dev->descriptor.iSerialNumber, mac_str, + sizeof(mac_str)) != 2 * ETH_ALEN) + return 1; + + for (i = 0; i < ETH_ALEN; i++) + esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]); + + return 0; +} + +/* ATM stuff */ +static int uea_atm_open(struct usbatm_data *usbatm, struct atm_dev *atm_dev) +{ + struct uea_softc *sc = usbatm->driver_data; + + return uea_getesi(sc, atm_dev->esi); +} + +static int uea_heavy(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + wait_event(sc->sync_q, IS_OPERATIONAL(sc)); + + return 0; + +} + +static int claim_interface(struct usb_device *usb_dev, + struct usbatm_data *usbatm, int ifnum) +{ + int ret; + struct usb_interface *intf = usb_ifnum_to_if(usb_dev, ifnum); + + if (!intf) { + uea_err(usb_dev, "interface %d not found\n", ifnum); + return -ENODEV; + } + + ret = usb_driver_claim_interface(&uea_driver, intf, usbatm); + if (ret != 0) + uea_err(usb_dev, "can't claim interface %d, error %d\n", ifnum, + ret); + return ret; +} + +static void create_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +{ + /* sysfs interface */ + device_create_file(&intf->dev, &dev_attr_stat_status); + device_create_file(&intf->dev, &dev_attr_stat_mflags); + device_create_file(&intf->dev, &dev_attr_stat_human_status); + device_create_file(&intf->dev, &dev_attr_stat_delin); + device_create_file(&intf->dev, &dev_attr_stat_vidcpe); + device_create_file(&intf->dev, &dev_attr_stat_usrate); + device_create_file(&intf->dev, &dev_attr_stat_dsrate); + device_create_file(&intf->dev, &dev_attr_stat_usattenuation); + device_create_file(&intf->dev, &dev_attr_stat_dsattenuation); + device_create_file(&intf->dev, &dev_attr_stat_usmargin); + device_create_file(&intf->dev, &dev_attr_stat_dsmargin); + device_create_file(&intf->dev, &dev_attr_stat_txflow); + device_create_file(&intf->dev, &dev_attr_stat_rxflow); + device_create_file(&intf->dev, &dev_attr_stat_uscorr); + device_create_file(&intf->dev, &dev_attr_stat_dscorr); + device_create_file(&intf->dev, &dev_attr_stat_usunc); + device_create_file(&intf->dev, &dev_attr_stat_dsunc); +} + +static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, + const struct usb_device_id *id, int *heavy) +{ + struct usb_device *usb = interface_to_usbdev(intf); + struct uea_softc *sc; + int ret, ifnum = intf->altsetting->desc.bInterfaceNumber; + + uea_enters(usb); + + /* interface 0 is for firmware/monitoring */ + if (ifnum != UEA_INTR_IFACE_NO) + return -ENODEV; + + *heavy = sync_wait[modem_index]; + + /* interface 1 is for outbound traffic */ + ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO); + if (ret < 0) + return ret; + + /* ADI930 has only 2 interfaces and inbound traffic + * is on interface 1 + */ + if (UEA_CHIP_VERSION(id) != ADI930) { + /* interface 2 is for inbound traffic */ + ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO); + if (ret < 0) + return ret; + } + + sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL); + if (!sc) { + uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n"); + return -ENOMEM; + } + + sc->usb_dev = usb; + usbatm->driver_data = sc; + sc->usbatm = usbatm; + sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0; + sc->driver_info = id->driver_info; + + ret = uea_boot(sc); + if (ret < 0) { + kfree(sc); + return ret; + } + + create_fs_entries(sc, intf); + return 0; +} + +static void destroy_fs_entries(struct uea_softc *sc, struct usb_interface *intf) +{ + /* sysfs interface */ + device_remove_file(&intf->dev, &dev_attr_stat_status); + device_remove_file(&intf->dev, &dev_attr_stat_mflags); + device_remove_file(&intf->dev, &dev_attr_stat_human_status); + device_remove_file(&intf->dev, &dev_attr_stat_delin); + device_remove_file(&intf->dev, &dev_attr_stat_vidcpe); + device_remove_file(&intf->dev, &dev_attr_stat_usrate); + device_remove_file(&intf->dev, &dev_attr_stat_dsrate); + device_remove_file(&intf->dev, &dev_attr_stat_usattenuation); + device_remove_file(&intf->dev, &dev_attr_stat_dsattenuation); + device_remove_file(&intf->dev, &dev_attr_stat_usmargin); + device_remove_file(&intf->dev, &dev_attr_stat_dsmargin); + device_remove_file(&intf->dev, &dev_attr_stat_txflow); + device_remove_file(&intf->dev, &dev_attr_stat_rxflow); + device_remove_file(&intf->dev, &dev_attr_stat_uscorr); + device_remove_file(&intf->dev, &dev_attr_stat_dscorr); + device_remove_file(&intf->dev, &dev_attr_stat_usunc); + device_remove_file(&intf->dev, &dev_attr_stat_dsunc); +} + +static void uea_unbind(struct usbatm_data *usbatm, struct usb_interface *intf) +{ + struct uea_softc *sc = usbatm->driver_data; + + destroy_fs_entries(sc, intf); + uea_stop(sc); + kfree(sc); +} + +static struct usbatm_driver uea_usbatm_driver = { + .driver_name = "ueagle-atm", + .owner = THIS_MODULE, + .bind = uea_bind, + .atm_start = uea_atm_open, + .unbind = uea_unbind, + .heavy_init = uea_heavy, + .in = UEA_BULK_DATA_PIPE, + .out = UEA_BULK_DATA_PIPE, +}; + +static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *usb = interface_to_usbdev(intf); + + uea_enters(usb); + uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) : %s\n", + le16_to_cpu(usb->descriptor.idVendor), + le16_to_cpu(usb->descriptor.idProduct), + chip_name[UEA_CHIP_VERSION(id)]); + + usb_reset_device(usb); + + if (UEA_IS_PREFIRM(id)) + return uea_load_firmware(usb, UEA_CHIP_VERSION(id)); + + return usbatm_usb_probe(intf, id, &uea_usbatm_driver); +} + +static void uea_disconnect(struct usb_interface *intf) +{ + struct usb_device *usb = interface_to_usbdev(intf); + int ifnum = intf->altsetting->desc.bInterfaceNumber; + uea_enters(usb); + + /* ADI930 has 2 interfaces and eagle 3 interfaces. + * Pre-firmware device has one interface + */ + if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) { + down(&uea_semaphore); + usbatm_usb_disconnect(intf); + up(&uea_semaphore); + uea_info(usb, "ADSL device removed\n"); + } + + uea_leaves(usb); +} + +/* + * List of supported VID/PID + */ +static const struct usb_device_id uea_ids[] = { + {USB_DEVICE(ELSA_VID, ELSA_PID_PREFIRM), .driver_info = ADI930 | PREFIRM}, + {USB_DEVICE(ELSA_VID, ELSA_PID_PSTFIRM), .driver_info = ADI930 | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_I_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_II_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PREFIRM), .driver_info = EAGLE_II | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_IIC_PID_PSTFIRM), .driver_info = EAGLE_II | PSTFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PREFIRM), .driver_info = EAGLE_III | PREFIRM}, + {USB_DEVICE(EAGLE_VID, EAGLE_III_PID_PSTFIRM), .driver_info = EAGLE_III | PSTFIRM}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_A_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PREFIRM), .driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, MILLER_B_PID_PSTFIRM), .driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM}, + {USB_DEVICE(USR_VID, HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM}, + {} +}; + +/* + * USB driver descriptor + */ +static struct usb_driver uea_driver = { + .owner = THIS_MODULE, + .name = "ueagle-atm", + .id_table = uea_ids, + .probe = uea_probe, + .disconnect = uea_disconnect, +}; + +MODULE_DEVICE_TABLE(usb, uea_ids); + +/** + * uea_init - Initialize the module. + * Register to USB subsystem + */ +static int __init uea_init(void) +{ + printk(KERN_INFO "[ueagle-atm] driver " EAGLEUSBVERSION " loaded\n"); + + usb_register(&uea_driver); + + return 0; +} + +module_init(uea_init); + +/** + * uea_exit - Destroy module + * Deregister with USB subsystem + */ +static void __exit uea_exit(void) +{ + /* + * This calls automatically the uea_disconnect method if necessary: + */ + usb_deregister(&uea_driver); + + printk(KERN_INFO "[ueagle-atm] driver unloaded\n"); +} + +module_exit(uea_exit); + +MODULE_AUTHOR("Damien Bergamini/Matthieu Castet/Stanislaw W. Gruszka"); +MODULE_DESCRIPTION("ADI 930/Eagle USB ADSL Modem driver"); +MODULE_LICENSE("Dual BSD/GPL"); -- cgit v1.2.3-70-g09d2 From 8d7802ed3c617120863f84346638d1cf1c96137b Mon Sep 17 00:00:00 2001 From: matthieu castet Date: Tue, 8 Nov 2005 00:02:30 +0100 Subject: [PATCH] USB: Eagle and ADI 930 usb adsl modem driver fix More care on loading firmware, take into account fw->size can't be zero. Signed-off-by: Matthieu CASTET Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/ueagle-atm.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 3e2475c666a..be08e16df09 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -426,14 +426,14 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte pfw = fw_entry->data; size = fw_entry->size; + if (size < 4) + goto err_fw_corrupted; crc = FW_GET_LONG(pfw); pfw += 4; size -= 4; - if (crc32_be(0, pfw, size) != crc) { - uea_err(usb, "firmware is corrupted\n"); - goto err; - } + if (crc32_be(0, pfw, size) != crc) + goto err_fw_corrupted; /* * Start to upload formware : send reset @@ -446,9 +446,14 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte goto err; } - while (size > 0) { + while (size > 3) { u8 len = FW_GET_BYTE(pfw); u16 add = FW_GET_WORD(pfw + 1); + + size -= len + 3; + if (size < 0) + goto err_fw_corrupted; + ret = uea_send_modem_cmd(usb, add, len, pfw + 3); if (ret < 0) { uea_err(usb, "uploading firmware data failed " @@ -456,9 +461,11 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte goto err; } pfw += len + 3; - size -= len + 3; } + if (size != 0) + goto err_fw_corrupted; + /* * Tell the modem we finish : de-assert reset */ @@ -469,6 +476,11 @@ static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *conte else uea_info(usb, "firmware uploaded\n"); + uea_leaves(usb); + return; + +err_fw_corrupted: + uea_err(usb, "firmware is corrupted\n"); err: uea_leaves(usb); } @@ -522,10 +534,6 @@ static int check_dsp(u8 *dsp, unsigned int len) u32 pageoffset; unsigned int i, j, p, pp; - /* enough space for pagecount? */ - if (len < 1) - return 1; - pagecount = FW_GET_BYTE(dsp); p = 1; -- cgit v1.2.3-70-g09d2 From 2c1c3c4cd5f796b1912c65aaf3bf48c0ddf11f5e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:24:46 -0800 Subject: [PATCH] USB: EHCI updates (4/4) driver model wakeup flags This teaches the EHCI driver to use the new driver model wakeup flags, replacing the similar ones in the HCD glue. It also adds a workaround for the current glitch whereby PCI init doesn't init the wakeup flags from the PCI PM capabilities. (EHCI controllers don't worry about legacy mode; the PCI PM capability would always do the job.) Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- drivers/usb/host/ehci-hub.c | 4 ++-- drivers/usb/host/ehci-pci.c | 11 ++++++++++- 3 files changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 29f52a44b92..dd871023265 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -624,7 +624,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) } /* remote wakeup [4.3.1] */ - if ((status & STS_PCD) && hcd->remote_wakeup) { + if ((status & STS_PCD) && device_may_wakeup(&hcd->self.root_hub->dev)) { unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 82caf336e9b..69b0b9be7a6 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -59,7 +59,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) t2 |= PORT_SUSPEND; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E; else t2 &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E); @@ -517,7 +517,7 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) temp |= PORT_WAKE_BITS; writel (temp | PORT_SUSPEND, &ehci->regs->port_status [wIndex]); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 13f73a836e4..ac088bc72f1 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -210,7 +210,16 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* Serial Bus Release Number is at PCI 0x60 offset */ pci_read_config_byte(pdev, 0x60, &ehci->sbrn); - /* REVISIT: per-port wake capability (PCI 0x62) currently unused */ + /* Workaround current PCI init glitch: wakeup bits aren't + * being set from PCI PM capability. + */ + if (!device_can_wakeup(&pdev->dev)) { + u16 port_wake; + + pci_read_config_word(pdev, 0x62, &port_wake); + if (port_wake & 0x0001) + device_init_wakeup(&pdev->dev, 1); + } retval = ehci_pci_reinit(ehci, pdev); done: -- cgit v1.2.3-70-g09d2 From d97cc2f2e938547a47daef29bc10ab38600a3310 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 22 Dec 2005 17:05:18 -0800 Subject: [PATCH] USB: ehci fix driver model wakeup flags On some systems, EHCI seems to be getting IRQs too early during driver setup ... before the root hub is allocated, in particular, making trouble for any code chasing down root hub pointers! In this case, it seems to be safe to just ignore the root hub setting. Thanks to Rafael J. Wysocki for getting this properly tested. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index dd871023265..b5b57e957e5 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -624,7 +624,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs) } /* remote wakeup [4.3.1] */ - if ((status & STS_PCD) && device_may_wakeup(&hcd->self.root_hub->dev)) { + if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); /* resume root hub? */ -- cgit v1.2.3-70-g09d2 From 0c8624f91d91df7cdeb9b2dace3269b8788c845f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:31:25 -0800 Subject: [PATCH] USB: wakeup flag updates (1/3) sl811-hcd This makes the SL811 HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). From: David Brownell Signed-off-by: Greg Kroah-Hartman drivers/usb/host/sl811-hcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- drivers/usb/host/sl811-hcd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a7722a6a5a5..5a28e611589 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1581,7 +1581,9 @@ sl811h_start(struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; if (sl811->board) { - hcd->can_wakeup = sl811->board->can_wakeup; + if (!device_can_wakeup(hcd->self.controller)) + device_init_wakeup(hcd->self.controller, + sl811->board->can_wakeup); hcd->power_budget = sl811->board->power * 2; } @@ -1805,7 +1807,7 @@ sl811h_resume(struct platform_device *dev) * let's assume it'd only be powered to enable remote wakeup. */ if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND - || !hcd->can_wakeup) { + || !device_can_wakeup(&hcd->self.root_hub->dev)) { sl811->port1 = 0; port_power(sl811, 1); return 0; -- cgit v1.2.3-70-g09d2 From baefbc39d8e23942cc10db92f5bc42e3476f6bc1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:34:41 -0800 Subject: [PATCH] USB: wakeup flag updates (2/3) uhci-hcd This makes UHCI stop using the HCD glue wakeup flags to report whether the controller can wake the system. The existing code was wrong anyway; having a PCI PM capability doesn't imply it reports PME# is supported. I skimmed Intel's ICH7 datasheet and that basically says the wakeup signaling gets routed only through ACPI registers. (On the other hand, many VIA chips provide the PCI PM capabilities...) I think that doing this correctly with UHCI is going to require the ACPI folk to associate the /proc/acpi/wakeup identifiers (and wakeup enable/disable flags) with the relevant /sys/devices/pci*/... devices. From: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 79efaf7d86a..5589d4010e3 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -478,8 +478,6 @@ static int uhci_start(struct usb_hcd *hcd) struct dentry *dentry; hcd->uses_new_polling = 1; - if (pci_find_capability(to_pci_dev(uhci_dev(uhci)), PCI_CAP_ID_PM)) - hcd->can_wakeup = 1; /* Assume it supports PME# */ dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, -- cgit v1.2.3-70-g09d2 From 704aa0b7a9744d5f2b5c1fa68b826fcca73a2104 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:38:24 -0800 Subject: [PATCH] USB: wakeup flag updates (3/3) isp116x-hcd This makes the ISP116x HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 342cfadc999..c95af116f9e 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1378,7 +1378,8 @@ static int isp116x_start(struct usb_hcd *hcd) val = 0; if (board->remote_wakeup_enable) { - hcd->can_wakeup = 1; + if (!device_can_wakeup(hcd->self.controller)) + device_init_wakeup(hcd->self.controller, 1); val |= RH_HS_DRWE; } isp116x_write_reg32(isp116x, HCRHSTATUS, val); @@ -1428,7 +1429,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) hcd->state = HC_STATE_QUIESCING; val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) val |= HCCONTROL_RWE; /* Wait for usb transfers to finish */ mdelay(2); -- cgit v1.2.3-70-g09d2 From c9a50cc9318772e62d56f2a9172bdfda72bdacbe Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 20:45:20 -0800 Subject: [PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Makefile | 4 ++++ drivers/usb/host/ehci-hcd.c | 7 ------- drivers/usb/host/ohci-hcd.c | 7 ------- drivers/usb/host/pci-quirks.c | 6 ------ drivers/usb/host/sl811-hcd.c | 7 ------- drivers/usb/host/sl811_cs.c | 5 +++-- drivers/usb/host/uhci-hcd.c | 5 ----- 7 files changed, 7 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 58321d3f314..e3020f4b17b 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -2,6 +2,10 @@ # Makefile for USB Host Controller Drivers # +ifeq ($(CONFIG_USB_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG +endif + obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b5b57e957e5..9dd3d14c64f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -17,13 +17,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index bf1d9abc07a..e3af3ac4416 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -75,13 +75,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#else -# undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index e46528c825b..3ef2c0cdf1d 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,12 +9,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#else -#undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5a28e611589..3a9cd460796 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -32,13 +32,6 @@ #undef PACKET_TRACE #include - -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#else -# undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index e73faf831b2..5056b745999 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -38,7 +38,7 @@ MODULE_LICENSE("GPL"); /* MACROS */ /*====================================================================*/ -#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) +#if defined(DEBUG) || defined(PCMCIA_DEBUG) static int pc_debug = 0; module_param(pc_debug, int, 0644); @@ -129,7 +129,8 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) resources[2].end = base_addr + 1; /* The driver core will probe for us. We know sl811-hcd has been - * initialized already because of the link order dependency. + * initialized already because of the link order dependency created + * by referencing "sl811h_driver". */ platform_dev.name = sl811h_driver.name; return platform_device_register(&platform_dev); diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 5589d4010e3..1c0394cb3c8 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -23,11 +23,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#else -#undef DEBUG -#endif #include #include #include -- cgit v1.2.3-70-g09d2 From 87c4252a35310fdbb2aabb880a39b83f83cadf62 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 9 Nov 2005 16:59:56 -0500 Subject: [PATCH] USB: file-storage gadget: Add reference count for children This patch (as601) adds a proper reference count to the file-storage gadget's main data structure, to keep track of references held by child devices (LUNs in this case). Before this, the driver would wait for each child to be released before unbinding. While there's nothing really wrong with that (you can't create a hang by doing "rmmod g_file_storage Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index ea09aaa3cab..f6f0b2aa114 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -224,6 +224,7 @@ #include #include #include +#include #include #include #include @@ -631,6 +632,9 @@ struct fsg_dev { /* filesem protects: backing files in use */ struct rw_semaphore filesem; + /* reference counting: wait until all LUNs are released */ + struct kref ref; + struct usb_ep *ep0; // Handy copy of gadget->ep0 struct usb_request *ep0req; // For control responses volatile unsigned int ep0_req_tag; @@ -694,7 +698,6 @@ struct fsg_dev { unsigned int nluns; struct lun *luns; struct lun *curlun; - struct completion lun_released; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -3642,11 +3645,19 @@ static DEVICE_ATTR(file, 0444, show_file, NULL); /*-------------------------------------------------------------------------*/ +static void fsg_release(struct kref *ref) +{ + struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); + + kfree(fsg->luns); + kfree(fsg); +} + static void lun_release(struct device *dev) { struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); - complete(&fsg->lun_released); + kref_put(&fsg->ref, fsg_release); } static void fsg_unbind(struct usb_gadget *gadget) @@ -3660,14 +3671,12 @@ static void fsg_unbind(struct usb_gadget *gadget) clear_bit(REGISTERED, &fsg->atomic_bitflags); /* Unregister the sysfs attribute files and the LUNs */ - init_completion(&fsg->lun_released); for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); device_unregister(&curlun->dev); - wait_for_completion(&fsg->lun_released); curlun->registered = 0; } } @@ -3846,6 +3855,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) curlun->dev.release = lun_release; device_create_file(&curlun->dev, &dev_attr_ro); device_create_file(&curlun->dev, &dev_attr_file); + kref_get(&fsg->ref); } if (file[i] && *file[i]) { @@ -4061,6 +4071,7 @@ static int __init fsg_alloc(void) return -ENOMEM; spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); + kref_init(&fsg->ref); init_waitqueue_head(&fsg->thread_wqh); init_completion(&fsg->thread_notifier); @@ -4069,13 +4080,6 @@ static int __init fsg_alloc(void) } -static void fsg_free(struct fsg_dev *fsg) -{ - kfree(fsg->luns); - kfree(fsg); -} - - static int __init fsg_init(void) { int rc; @@ -4085,7 +4089,7 @@ static int __init fsg_init(void) return rc; fsg = the_fsg; if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) - fsg_free(fsg); + kref_put(&fsg->ref, fsg_release); return rc; } module_init(fsg_init); @@ -4103,6 +4107,6 @@ static void __exit fsg_cleanup(void) wait_for_completion(&fsg->thread_notifier); close_all_backing_files(fsg); - fsg_free(fsg); + kref_put(&fsg->ref, fsg_release); } module_exit(fsg_cleanup); -- cgit v1.2.3-70-g09d2 From 4a1728a28a193aa388900714bbb1f375e08a6d8e Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Tue, 15 Nov 2005 09:48:23 +0200 Subject: [PATCH] USB: usb-net: removes redundant return removes all redundant collecting of the return value from get/set_registers() and suchlike. can't remember who put all of those some time ago, but they doesn't make any sense to me. where needed only a few references remained; Signed-off-by: Petko Manolov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/pegasus.c | 106 ++++++++++++++++++++++------------------------ 1 file changed, 51 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 683e3df5d60..d8c7adabf20 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -45,7 +45,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.6.12 (2005/01/13)" +#define DRIVER_VERSION "v0.6.13 (2005/11/13)" #define DRIVER_AUTHOR "Petko Manolov " #define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver" @@ -113,7 +113,7 @@ static void ctrl_callback(struct urb *urb, struct pt_regs *regs) break; default: if (netif_msg_drv(pegasus)) - dev_err(&pegasus->intf->dev, "%s, status %d\n", + dev_dbg(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, urb->status); } pegasus->flags &= ~ETH_REGS_CHANGED; @@ -308,9 +308,9 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) __le16 regdi; int ret; - ret = set_register(pegasus, PhyCtrl, 0); - ret = set_registers(pegasus, PhyAddr, sizeof (data), data); - ret = set_register(pegasus, PhyCtrl, (indx | PHY_READ)); + set_register(pegasus, PhyCtrl, 0); + set_registers(pegasus, PhyAddr, sizeof (data), data); + set_register(pegasus, PhyCtrl, (indx | PHY_READ)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); if (data[0] & PHY_DONE) @@ -319,12 +319,12 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd) if (i < REG_TIMEOUT) { ret = get_registers(pegasus, PhyData, 2, ®di); *regd = le16_to_cpu(regdi); - return 1; + return ret; } if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return 0; + return ret; } static int mdio_read(struct net_device *dev, int phy_id, int loc) @@ -344,20 +344,20 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd) data[1] = (u8) regd; data[2] = (u8) (regd >> 8); - ret = set_register(pegasus, PhyCtrl, 0); - ret = set_registers(pegasus, PhyAddr, sizeof(data), data); - ret = set_register(pegasus, PhyCtrl, (indx | PHY_WRITE)); + set_register(pegasus, PhyCtrl, 0); + set_registers(pegasus, PhyAddr, sizeof(data), data); + set_register(pegasus, PhyCtrl, (indx | PHY_WRITE)); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, PhyCtrl, 1, data); if (data[0] & PHY_DONE) break; } if (i < REG_TIMEOUT) - return 0; + return ret; if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return 1; + return -ETIMEDOUT; } static void mdio_write(struct net_device *dev, int phy_id, int loc, int val) @@ -374,9 +374,9 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) __le16 retdatai; int ret; - ret = set_register(pegasus, EpromCtrl, 0); - ret = set_register(pegasus, EpromOffset, index); - ret = set_register(pegasus, EpromCtrl, EPROM_READ); + set_register(pegasus, EpromCtrl, 0); + set_register(pegasus, EpromOffset, index); + set_register(pegasus, EpromCtrl, EPROM_READ); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); @@ -386,12 +386,12 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata) if (i < REG_TIMEOUT) { ret = get_registers(pegasus, EpromData, 2, &retdatai); *retdata = le16_to_cpu(retdatai); - return 0; + return ret; } if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return -1; + return -ETIMEDOUT; } #ifdef PEGASUS_WRITE_EEPROM @@ -400,8 +400,8 @@ static inline void enable_eprom_write(pegasus_t * pegasus) __u8 tmp; int ret; - ret = get_registers(pegasus, EthCtrl2, 1, &tmp); - ret = set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE); + get_registers(pegasus, EthCtrl2, 1, &tmp); + set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE); } static inline void disable_eprom_write(pegasus_t * pegasus) @@ -409,9 +409,9 @@ static inline void disable_eprom_write(pegasus_t * pegasus) __u8 tmp; int ret; - ret = get_registers(pegasus, EthCtrl2, 1, &tmp); - ret = set_register(pegasus, EpromCtrl, 0); - ret = set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE); + get_registers(pegasus, EthCtrl2, 1, &tmp); + set_register(pegasus, EpromCtrl, 0); + set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE); } static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) @@ -420,11 +420,11 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) __u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE }; int ret; - ret = set_registers(pegasus, EpromOffset, 4, d); + set_registers(pegasus, EpromOffset, 4, d); enable_eprom_write(pegasus); - ret = set_register(pegasus, EpromOffset, index); - ret = set_registers(pegasus, EpromData, 2, &data); - ret = set_register(pegasus, EpromCtrl, EPROM_WRITE); + set_register(pegasus, EpromOffset, index); + set_registers(pegasus, EpromData, 2, &data); + set_register(pegasus, EpromCtrl, EPROM_WRITE); for (i = 0; i < REG_TIMEOUT; i++) { ret = get_registers(pegasus, EpromCtrl, 1, &tmp); @@ -433,10 +433,10 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data) } disable_eprom_write(pegasus); if (i < REG_TIMEOUT) - return 0; + return ret; if (netif_msg_drv(pegasus)) dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__); - return -1; + return -ETIMEDOUT; } #endif /* PEGASUS_WRITE_EEPROM */ @@ -454,10 +454,9 @@ static inline void get_node_id(pegasus_t * pegasus, __u8 * id) static void set_ethernet_addr(pegasus_t * pegasus) { __u8 node_id[6]; - int ret; get_node_id(pegasus, node_id); - ret = set_registers(pegasus, EthID, sizeof (node_id), node_id); + set_registers(pegasus, EthID, sizeof (node_id), node_id); memcpy(pegasus->net->dev_addr, node_id, sizeof (node_id)); } @@ -465,30 +464,29 @@ static inline int reset_mac(pegasus_t * pegasus) { __u8 data = 0x8; int i; - int ret; - ret = set_register(pegasus, EthCtrl1, data); + set_register(pegasus, EthCtrl1, data); for (i = 0; i < REG_TIMEOUT; i++) { - ret = get_registers(pegasus, EthCtrl1, 1, &data); + get_registers(pegasus, EthCtrl1, 1, &data); if (~data & 0x08) { if (loopback & 1) break; if (mii_mode && (pegasus->features & HAS_HOME_PNA)) - ret = set_register(pegasus, Gpio1, 0x34); + set_register(pegasus, Gpio1, 0x34); else - ret = set_register(pegasus, Gpio1, 0x26); - ret = set_register(pegasus, Gpio0, pegasus->features); - ret = set_register(pegasus, Gpio0, DEFAULT_GPIO_SET); + set_register(pegasus, Gpio1, 0x26); + set_register(pegasus, Gpio0, pegasus->features); + set_register(pegasus, Gpio0, DEFAULT_GPIO_SET); break; } } if (i == REG_TIMEOUT) - return 1; + return -ETIMEDOUT; if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS || usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) { - ret = set_register(pegasus, Gpio0, 0x24); - ret = set_register(pegasus, Gpio0, 0x26); + set_register(pegasus, Gpio0, 0x24); + set_register(pegasus, Gpio0, 0x26); } if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) { __u16 auxmode; @@ -527,7 +525,7 @@ static int enable_net_traffic(struct net_device *dev, struct usb_device *usb) write_mii_word(pegasus, 0, 0x1b, auxmode | 4); } - return 0; + return ret; } static void fill_skb_pool(pegasus_t * pegasus) @@ -881,9 +879,8 @@ static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev) static inline void disable_net_traffic(pegasus_t * pegasus) { int tmp = 0; - int ret; - ret = set_registers(pegasus, EthCtrl0, 2, &tmp); + set_registers(pegasus, EthCtrl0, 2, &tmp); } static inline void get_interrupt_interval(pegasus_t * pegasus) @@ -1206,18 +1203,17 @@ static __u8 mii_phy_probe(pegasus_t * pegasus) static inline void setup_pegasus_II(pegasus_t * pegasus) { __u8 data = 0xa5; - int ret; - ret = set_register(pegasus, Reg1d, 0); - ret = set_register(pegasus, Reg7b, 1); + set_register(pegasus, Reg1d, 0); + set_register(pegasus, Reg7b, 1); mdelay(100); if ((pegasus->features & HAS_HOME_PNA) && mii_mode) - ret = set_register(pegasus, Reg7b, 0); + set_register(pegasus, Reg7b, 0); else - ret = set_register(pegasus, Reg7b, 2); + set_register(pegasus, Reg7b, 2); - ret = set_register(pegasus, 0x83, data); - ret = get_registers(pegasus, 0x83, 1, &data); + set_register(pegasus, 0x83, data); + get_registers(pegasus, 0x83, 1, &data); if (data == 0xa5) { pegasus->chip = 0x8513; @@ -1225,14 +1221,14 @@ static inline void setup_pegasus_II(pegasus_t * pegasus) pegasus->chip = 0; } - ret = set_register(pegasus, 0x80, 0xc0); - ret = set_register(pegasus, 0x83, 0xff); - ret = set_register(pegasus, 0x84, 0x01); + set_register(pegasus, 0x80, 0xc0); + set_register(pegasus, 0x83, 0xff); + set_register(pegasus, 0x84, 0x01); if (pegasus->features & HAS_HOME_PNA && mii_mode) - ret = set_register(pegasus, Reg81, 6); + set_register(pegasus, Reg81, 6); else - ret = set_register(pegasus, Reg81, 2); + set_register(pegasus, Reg81, 2); } -- cgit v1.2.3-70-g09d2 From a4f81a61ebba5953cba1e76f66423a7eca4a5ee4 Mon Sep 17 00:00:00 2001 From: "A.YOSHIYAMA" Date: Tue, 15 Nov 2005 09:55:18 +0200 Subject: [PATCH] USB: usb-net: new device ID passed through module parameter adds new module parameter "devid" that points to a string with format "device_name:vendor_id:device_id:flags". if provided at module load time, this string is being parsed and a new entry is created in usb_dev_id[] and pegasus_ids[] so the new device can later be recognized by the probe routine. this might be helpful for someone who don't know/wish to build new module/kernel, but want to use his new usb-to-eth device that is not yet listed in pegasus.h Signed-off-by: Petko Manolov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/pegasus.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index d8c7adabf20..156a2f1cb39 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -57,12 +57,14 @@ static const char driver_name[] = "pegasus"; static int loopback = 0; static int mii_mode = 0; +static char *devid=NULL; static struct usb_eth_dev usb_dev_id[] = { #define PEGASUS_DEV(pn, vid, pid, flags) \ {.name = pn, .vendor = vid, .device = pid, .private = flags}, #include "pegasus.h" #undef PEGASUS_DEV + {NULL, 0, 0, 0}, {NULL, 0, 0, 0} }; @@ -71,6 +73,7 @@ static struct usb_device_id pegasus_ids[] = { {.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid}, #include "pegasus.h" #undef PEGASUS_DEV + {}, {} }; @@ -79,8 +82,10 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(loopback, bool, 0); module_param(mii_mode, bool, 0); +module_param(devid, charp, 0); MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)"); MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0"); +MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'"); /* use ethtool to change the level for any given device */ static int msg_level = -1; @@ -1410,9 +1415,42 @@ static struct usb_driver pegasus_driver = { .resume = pegasus_resume, }; +static void parse_id(char *id) +{ + unsigned int vendor_id=0, device_id=0, flags=0, i=0; + char *token, *name=NULL; + + if ((token = strsep(&id, ":")) != NULL) + name = token; + /* name now points to a null terminated string*/ + if ((token = strsep(&id, ":")) != NULL) + vendor_id = simple_strtoul(token, NULL, 16); + if ((token = strsep(&id, ":")) != NULL) + device_id = simple_strtoul(token, NULL, 16); + flags = simple_strtoul(id, NULL, 16); + pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n", + driver_name, name, vendor_id, device_id, flags); + + if (vendor_id > 0x10000 || vendor_id == 0) + return; + if (device_id > 0x10000 || device_id == 0) + return; + + for (i=0; usb_dev_id[i].name; i++); + usb_dev_id[i].name = name; + usb_dev_id[i].vendor = vendor_id; + usb_dev_id[i].device = device_id; + usb_dev_id[i].private = flags; + pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE; + pegasus_ids[i].idVendor = vendor_id; + pegasus_ids[i].idProduct = device_id; +} + static int __init pegasus_init(void) { pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION); + if (devid) + parse_id(devid); pegasus_workqueue = create_singlethread_workqueue("pegasus"); if (!pegasus_workqueue) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 8364d6b0be2dbbf162c6aea79615b5025a0d67c2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 14 Nov 2005 12:16:30 -0500 Subject: [PATCH] USB: dummy_hcd: rename variables The recent platform_device update has reintroduced into dummy_hcd.c the dreaded dev->dev syndrome. This harkens back to when an earlier version of that driver included the unforgettable line: dev->dev.dev.driver_data = dev; This patch (as602) renames the platform_device variables to "pdev", in the hope of reducing confusion. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 50 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index c655d46c8ae..4932b07b316 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -896,7 +896,7 @@ dummy_gadget_release (struct device *dev) #endif } -static int dummy_udc_probe (struct platform_device *dev) +static int dummy_udc_probe (struct platform_device *pdev) { struct dummy *dum = the_controller; int rc; @@ -909,7 +909,7 @@ static int dummy_udc_probe (struct platform_device *dev) dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0); strcpy (dum->gadget.dev.bus_id, "gadget"); - dum->gadget.dev.parent = &dev->dev; + dum->gadget.dev.parent = &pdev->dev; dum->gadget.dev.release = dummy_gadget_release; rc = device_register (&dum->gadget.dev); if (rc < 0) @@ -919,47 +919,47 @@ static int dummy_udc_probe (struct platform_device *dev) usb_bus_get (&dummy_to_hcd (dum)->self); #endif - platform_set_drvdata (dev, dum); + platform_set_drvdata (pdev, dum); device_create_file (&dum->gadget.dev, &dev_attr_function); return rc; } -static int dummy_udc_remove (struct platform_device *dev) +static int dummy_udc_remove (struct platform_device *pdev) { - struct dummy *dum = platform_get_drvdata (dev); + struct dummy *dum = platform_get_drvdata (pdev); - platform_set_drvdata (dev, NULL); + platform_set_drvdata (pdev, NULL); device_remove_file (&dum->gadget.dev, &dev_attr_function); device_unregister (&dum->gadget.dev); return 0; } -static int dummy_udc_suspend (struct platform_device *dev, pm_message_t state) +static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state) { - struct dummy *dum = platform_get_drvdata(dev); + struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 1; set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->dev.power.power_state = state; + pdev->dev.power.power_state = state; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } -static int dummy_udc_resume (struct platform_device *dev) +static int dummy_udc_resume (struct platform_device *pdev) { - struct dummy *dum = platform_get_drvdata(dev); + struct dummy *dum = platform_get_drvdata(pdev); - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); dum->udc_suspended = 0; set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->dev.power.power_state = PMSG_ON; + pdev->dev.power.power_state = PMSG_ON; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } @@ -1899,14 +1899,14 @@ static const struct hc_driver dummy_hcd = { .bus_resume = dummy_bus_resume, }; -static int dummy_hcd_probe (struct platform_device *dev) +static int dummy_hcd_probe(struct platform_device *pdev) { struct usb_hcd *hcd; int retval; - dev_info(&dev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); - hcd = usb_create_hcd (&dummy_hcd, &dev->dev, dev->dev.bus_id); + hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, pdev->dev.bus_id); if (!hcd) return -ENOMEM; the_controller = hcd_to_dummy (hcd); @@ -1919,34 +1919,34 @@ static int dummy_hcd_probe (struct platform_device *dev) return retval; } -static int dummy_hcd_remove (struct platform_device *dev) +static int dummy_hcd_remove (struct platform_device *pdev) { struct usb_hcd *hcd; - hcd = platform_get_drvdata (dev); + hcd = platform_get_drvdata (pdev); usb_remove_hcd (hcd); usb_put_hcd (hcd); the_controller = NULL; return 0; } -static int dummy_hcd_suspend (struct platform_device *dev, pm_message_t state) +static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (dev); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + hcd = platform_get_drvdata (pdev); hcd->state = HC_STATE_SUSPENDED; return 0; } -static int dummy_hcd_resume (struct platform_device *dev) +static int dummy_hcd_resume (struct platform_device *pdev) { struct usb_hcd *hcd; - dev_dbg (&dev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (dev); + dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); + hcd = platform_get_drvdata (pdev); hcd->state = HC_STATE_RUNNING; usb_hcd_poll_rh_status (hcd); -- cgit v1.2.3-70-g09d2 From 1c50c317e2e7f15427149cbc216a63366468710e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 14 Nov 2005 11:45:38 -0500 Subject: [PATCH] USB: central handling for host controllers that were reset during suspend/resume This patch (as515b) adds a routine to usbcore to simplify handling of host controllers that lost power or were reset during suspend/resume. The new core routine marks all the child devices of the root hub as NOTATTACHED and tells khubd to disconnect the device structures as soon as possible. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.h | 1 + drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-pci.c | 9 +-------- drivers/usb/host/ohci-hcd.c | 7 +------ drivers/usb/host/sl811-hcd.c | 1 + drivers/usb/host/uhci-hcd.c | 6 +++++- 6 files changed, 42 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index c8a1b350e2c..591b5aad1a1 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -380,6 +380,7 @@ extern int usb_find_interface_driver (struct usb_device *dev, #ifdef CONFIG_PM extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd); extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd); +extern void usb_root_hub_lost_power (struct usb_device *rhdev); extern int hcd_bus_suspend (struct usb_bus *bus); extern int hcd_bus_resume (struct usb_bus *bus); #else diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f78bd124d29..5faf7edd73c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1039,6 +1039,39 @@ void usb_set_device_state(struct usb_device *udev, EXPORT_SYMBOL(usb_set_device_state); +#ifdef CONFIG_PM + +/** + * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power + * @rhdev: struct usb_device for the root hub + * + * The USB host controller driver calls this function when its root hub + * is resumed and Vbus power has been interrupted or the controller + * has been reset. The routine marks all the children of the root hub + * as NOTATTACHED and marks logical connect-change events on their ports. + */ +void usb_root_hub_lost_power(struct usb_device *rhdev) +{ + struct usb_hub *hub; + int port1; + unsigned long flags; + + dev_warn(&rhdev->dev, "root hub lost power or was reset\n"); + spin_lock_irqsave(&device_state_lock, flags); + hub = hdev_to_hub(rhdev); + for (port1 = 1; port1 <= rhdev->maxchild; ++port1) { + if (rhdev->children[port1 - 1]) { + recursively_mark_NOTATTACHED( + rhdev->children[port1 - 1]); + set_bit(port1, hub->change_bits); + } + } + spin_unlock_irqrestore(&device_state_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_root_hub_lost_power); + +#endif + static void choose_address(struct usb_device *udev) { int devnum; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index ac088bc72f1..08ca0f849da 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -278,7 +278,6 @@ static int ehci_pci_resume(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned port; - struct usb_device *root = hcd->self.root_hub; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = -EINVAL; @@ -312,13 +311,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd) restart: ehci_dbg(ehci, "lost power, restarting\n"); - for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) { - port--; - if (!root->children [port]) - continue; - usb_set_device_state(root->children[port], - USB_STATE_NOTATTACHED); - } + usb_root_hub_lost_power(hcd->self.root_hub); /* Else reset, to cope with power loss or flush-to-storage * style "resume" having let BIOS kick in during reboot. diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e3af3ac4416..a4b12404ae0 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -795,7 +795,6 @@ static int ohci_restart (struct ohci_hcd *ohci) int temp; int i; struct urb_priv *priv; - struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub; /* mark any devices gone, so they do nothing till khubd disconnects. * recycle any "live" eds/tds (and urbs) right away. @@ -804,11 +803,7 @@ static int ohci_restart (struct ohci_hcd *ohci) */ spin_lock_irq(&ohci->lock); disable (ohci); - for (i = 0; i < root->maxchild; i++) { - if (root->children [i]) - usb_set_device_state (root->children[i], - USB_STATE_NOTATTACHED); - } + usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub); if (!list_empty (&ohci->pending)) ohci_dbg(ohci, "abort schedule...\n"); list_for_each_entry (priv, &ohci->pending, pending) { diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 3a9cd460796..517360b77d8 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1803,6 +1803,7 @@ sl811h_resume(struct platform_device *dev) || !device_can_wakeup(&hcd->self.root_hub->dev)) { sl811->port1 = 0; port_power(sl811, 1); + usb_root_hub_lost_power(hcd->self.root_hub); return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 1c0394cb3c8..071fab6b647 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -748,8 +748,12 @@ static int uhci_resume(struct usb_hcd *hcd) check_and_reset_hc(uhci); configure_hc(uhci); - if (uhci->rh_state == UHCI_RH_RESET) + if (uhci->rh_state == UHCI_RH_RESET) { + + /* The controller had to be reset */ + usb_root_hub_lost_power(hcd->self.root_hub); suspend_rh(uhci, UHCI_RH_SUSPENDED); + } spin_unlock_irq(&uhci->lock); -- cgit v1.2.3-70-g09d2 From a00828e9ac62caed7b830d631914d7748817ccd1 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 22 Oct 2005 20:15:09 -0700 Subject: [PATCH] USB: drivers/usb/storage/libusual This patch adds a shim driver libusual, which routes devices between usb-storage and ub according to the common table, based on unusual_devs.h. The help and example syntax is in Kconfig. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/Kconfig | 3 +- drivers/block/ub.c | 23 ++-- drivers/usb/Makefile | 1 + drivers/usb/storage/Kconfig | 14 ++ drivers/usb/storage/Makefile | 4 + drivers/usb/storage/libusual.c | 266 +++++++++++++++++++++++++++++++++++++ drivers/usb/storage/protocol.h | 14 -- drivers/usb/storage/transport.h | 31 ----- drivers/usb/storage/unusual_devs.h | 24 ++++ drivers/usb/storage/usb.c | 119 ++++++----------- drivers/usb/storage/usb.h | 31 +---- include/linux/usb_usual.h | 123 +++++++++++++++++ 12 files changed, 486 insertions(+), 167 deletions(-) create mode 100644 drivers/usb/storage/libusual.c create mode 100644 include/linux/usb_usual.h (limited to 'drivers') diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 7b1cd93892b..c4b9d2adfc0 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -358,7 +358,8 @@ config BLK_DEV_UB This driver supports certain USB attached storage devices such as flash keys. - Warning: Enabling this cripples the usb-storage driver. + If you enable this driver, it is recommended to avoid conflicts + with usb-storage by enabling USB_LIBUSUAL. If unsure, say N. diff --git a/drivers/block/ub.c b/drivers/block/ub.c index bfb23d543ff..06d741d58a6 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -106,16 +107,6 @@ * +--------+ */ -/* - * Definitions which have to be scattered once we understand the layout better. - */ - -/* Transport (despite PR in the name) */ -#define US_PR_BULK 0x50 /* bulk only */ - -/* Protocol */ -#define US_SC_SCSI 0x06 /* Transparent */ - /* * This many LUNs per USB device. * Every one of them takes a host, see UB_MAX_HOSTS. @@ -422,13 +413,18 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum); /* */ +#ifdef CONFIG_USB_LIBUSUAL + +#define ub_usb_ids storage_usb_ids +#else + static struct usb_device_id ub_usb_ids[] = { - // { USB_DEVICE_VER(0x0781, 0x0002, 0x0009, 0x0009) }, /* SDDR-31 */ { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, { } }; MODULE_DEVICE_TABLE(usb, ub_usb_ids); +#endif /* CONFIG_USB_LIBUSUAL */ /* * Find me a way to identify "next free minor" for add_disk(), @@ -2172,6 +2168,9 @@ static int ub_probe(struct usb_interface *intf, int rc; int i; + if (usb_usual_check_type(dev_id, USB_US_TYPE_UB)) + return -ENXIO; + rc = -ENOMEM; if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL) goto err_core; @@ -2479,6 +2478,7 @@ static int __init ub_init(void) if ((rc = usb_register(&ub_driver)) != 0) goto err_register; + usb_usual_set_present(USB_US_TYPE_UB); return 0; err_register: @@ -2494,6 +2494,7 @@ static void __exit ub_exit(void) devfs_remove(DEVFS_NAME); unregister_blkdev(UB_MAJOR, DRV_NAME); + usb_usual_clear_present(USB_US_TYPE_UB); } module_init(ub_init); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index a50c2bc506f..3639c3f8d35 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_USB_MIDI) += class/ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ +obj-$(CONFIG_USB) += storage/ obj-$(CONFIG_USB_AIPTEK) += input/ obj-$(CONFIG_USB_ATI_REMOTE) += input/ diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c41d64dbb0f..bdfcb95d9c1 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -124,3 +124,17 @@ config USB_STORAGE_ONETOUCH hard drive's as an input device. An action can be associated with this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + +config USB_LIBUSUAL + bool "The shared table of common (or usual) storage devices" + depends on USB + help + This module contains a table of common (or usual) devices + for usb-storage and ub drivers, and allows to switch binding + of these devices without rebuilding modules. + + Typical syntax of /etc/modprobe.conf is: + + options libusual bias="ub" + + If unsure, say N. diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 44ab8f9978f..2d416e9028b 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -22,3 +22,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o $(usb-storage-obj-y) + +ifneq ($(CONFIG_USB_LIBUSUAL),) + obj-$(CONFIG_USB) += libusual.o +endif diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c new file mode 100644 index 00000000000..61f73d8a2c0 --- /dev/null +++ b/drivers/usb/storage/libusual.c @@ -0,0 +1,266 @@ +/* + * libusual + * + * The libusual contains the table of devices common for ub and usb-storage. + */ +#include +#include +#include +#include +#include + +/* + */ +#define USU_MOD_FL_THREAD 1 /* Thread is running */ +#define USU_MOD_FL_PRESENT 2 /* The module is loaded */ + +struct mod_status { + unsigned long fls; +}; + +static struct mod_status stat[3]; +static DEFINE_SPINLOCK(usu_lock); + +/* + */ +#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR + +#define BIAS_NAME_SIZE (sizeof("usb-storage")) +static char bias[BIAS_NAME_SIZE]; +static int usb_usual_bias; +static const char *bias_names[3] = { "none", "usb-storage", "ub" }; + +static DECLARE_MUTEX_LOCKED(usu_init_notify); +static DECLARE_COMPLETION(usu_end_notify); +static atomic_t total_threads = ATOMIC_INIT(0); + +static int usu_probe_thread(void *arg); +static int parse_bias(const char *bias_s); + +/* + * The table. + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName,useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = ((useType)<<24) } + +struct usb_device_id storage_usb_ids [] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; + +#undef USUAL_DEV +#undef UNUSUAL_DEV + +MODULE_DEVICE_TABLE(usb, storage_usb_ids); +EXPORT_SYMBOL_GPL(storage_usb_ids); + +/* + * @type: the module type as an integer + */ +void usb_usual_set_present(int type) +{ + struct mod_status *st; + unsigned long flags; + + if (type <= 0 || type >= 3) + return; + st = &stat[type]; + spin_lock_irqsave(&usu_lock, flags); + st->fls |= USU_MOD_FL_PRESENT; + spin_unlock_irqrestore(&usu_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_usual_set_present); + +void usb_usual_clear_present(int type) +{ + struct mod_status *st; + unsigned long flags; + + if (type <= 0 || type >= 3) + return; + st = &stat[type]; + spin_lock_irqsave(&usu_lock, flags); + st->fls &= ~USU_MOD_FL_PRESENT; + spin_unlock_irqrestore(&usu_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_usual_clear_present); + +/* + * Match the calling driver type against the table. + * Returns: 0 if the device matches. + */ +int usb_usual_check_type(const struct usb_device_id *id, int caller_type) +{ + int id_type = USB_US_TYPE(id->driver_info); + + if (caller_type <= 0 || caller_type >= 3) + return -EINVAL; + + /* Drivers grab fixed assignment devices */ + if (id_type == caller_type) + return 0; + /* Drivers grab devices biased to them */ + if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias) + return 0; + return -ENODEV; +} +EXPORT_SYMBOL_GPL(usb_usual_check_type); + +/* + */ +static int usu_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int type; + int rc; + unsigned long flags; + + type = USB_US_TYPE(id->driver_info); + if (type == 0) + type = usb_usual_bias; + + spin_lock_irqsave(&usu_lock, flags); + if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { + spin_unlock_irqrestore(&usu_lock, flags); + return -ENXIO; + } + stat[type].fls |= USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + + rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM); + if (rc < 0) { + printk(KERN_WARNING "libusual: " + "Unable to start the thread for %s: %d\n", + bias_names[type], rc); + spin_lock_irqsave(&usu_lock, flags); + stat[type].fls &= ~USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + return rc; /* Not being -ENXIO causes a message printed */ + } + atomic_inc(&total_threads); + + return -ENXIO; +} + +static void usu_disconnect(struct usb_interface *intf) +{ + ; /* We should not be here. */ +} + +static struct usb_driver usu_driver = { + .owner = THIS_MODULE, + .name = "libusual", + .probe = usu_probe, + .disconnect = usu_disconnect, + .id_table = storage_usb_ids, +}; + +/* + * A whole new thread for a purpose of request_module seems quite stupid. + * The request_module forks once inside again. However, if we attempt + * to load a storage module from our own modprobe thread, that module + * references our symbols, which cannot be resolved until our module is + * initialized. I wish there was a way to wait for the end of initialization. + * The module notifier reports MODULE_STATE_COMING only. + * So, we wait until module->init ends as the next best thing. + */ +static int usu_probe_thread(void *arg) +{ + int type = (unsigned long) arg; + struct mod_status *st = &stat[type]; + int rc; + unsigned long flags; + + daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */ + + /* A completion does not work here because it's counted. */ + down(&usu_init_notify); + up(&usu_init_notify); + + rc = request_module(bias_names[type]); + spin_lock_irqsave(&usu_lock, flags); + if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) { + /* + * This should not happen, but let us keep tabs on it. + */ + printk(KERN_NOTICE "libusual: " + "modprobe for %s succeeded, but module is not present\n", + bias_names[type]); + } + st->fls &= ~USU_MOD_FL_THREAD; + spin_unlock_irqrestore(&usu_lock, flags); + + complete_and_exit(&usu_end_notify, 0); +} + +/* + */ +static int __init usb_usual_init(void) +{ + int rc; + + bias[BIAS_NAME_SIZE-1] = 0; + usb_usual_bias = parse_bias(bias); + + rc = usb_register(&usu_driver); + up(&usu_init_notify); + return rc; +} + +static void __exit usb_usual_exit(void) +{ + /* + * We do not check for any drivers present, because + * they keep us pinned with symbol references. + */ + + usb_deregister(&usu_driver); + + while (atomic_read(&total_threads) > 0) { + wait_for_completion(&usu_end_notify); + atomic_dec(&total_threads); + } +} + +/* + * Validate and accept the bias parameter. + * Maybe make an sysfs method later. XXX + */ +static int parse_bias(const char *bias_s) +{ + int i; + int bias_n = 0; + + if (bias_s[0] == 0 || bias_s[0] == ' ') { + bias_n = USB_US_DEFAULT_BIAS; + } else { + for (i = 1; i < 3; i++) { + if (strcmp(bias_s, bias_names[i]) == 0) { + bias_n = i; + break; + } + } + if (bias_n == 0) { + bias_n = USB_US_DEFAULT_BIAS; + printk(KERN_INFO + "libusual: unknown bias \"%s\", using \"%s\"\n", + bias_s, bias_names[bias_n]); + } + } + return bias_n; +} + +module_init(usb_usual_init); +module_exit(usb_usual_exit); + +module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h index 02bff01ab09..845bed4b803 100644 --- a/drivers/usb/storage/protocol.h +++ b/drivers/usb/storage/protocol.h @@ -41,20 +41,6 @@ #ifndef _PROTOCOL_H_ #define _PROTOCOL_H_ -/* Sub Classes */ - -#define US_SC_RBC 0x01 /* Typically, flash devices */ -#define US_SC_8020 0x02 /* CD-ROM */ -#define US_SC_QIC 0x03 /* QIC-157 Tapes */ -#define US_SC_UFI 0x04 /* Floppy */ -#define US_SC_8070 0x05 /* Removable media */ -#define US_SC_SCSI 0x06 /* Transparent */ -#define US_SC_ISD200 0x07 /* ISD200 ATA */ -#define US_SC_MIN US_SC_RBC -#define US_SC_MAX US_SC_ISD200 - -#define US_SC_DEVICE 0xff /* Use device's value */ - /* Protocol handling routines */ extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*); extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*); diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 0a362cc781a..633a715850a 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -41,39 +41,8 @@ #ifndef _TRANSPORT_H_ #define _TRANSPORT_H_ -#include #include -/* Protocols */ - -#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ -#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ -#define US_PR_BULK 0x50 /* bulk only */ -#ifdef CONFIG_USB_STORAGE_USBAT -#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ -#endif -#ifdef CONFIG_USB_STORAGE_SDDR09 -#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ -#endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ -#endif -#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ - -#ifdef CONFIG_USB_STORAGE_FREECOM -#define US_PR_FREECOM 0xf1 /* Freecom */ -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ -#endif - -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ -#endif - -#define US_PR_DEVICE 0xff /* Use device's value */ - /* * Bulk only data structures */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f5f47a34b16..76904ad1124 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1134,3 +1134,27 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, US_SC_SCSI, US_PR_SDDR55, NULL, US_FL_SINGLE_LUN), #endif + +/* Control/Bulk transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR), + +/* Control/Bulk/Interrupt transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR), + +/* Bulk-only transport for all SubClass values */ +USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR), +USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3847ebed2aa..c8375aa6272 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -112,49 +112,33 @@ static atomic_t total_threads = ATOMIC_INIT(0); static DECLARE_COMPLETION(threads_gone); -/* The entries in this table, except for final ones here - * (USB_MASS_STORAGE_CLASS and the empty entry), correspond, - * line for line with the entries of us_unsuaul_dev_list[]. +/* + * The entries in this table correspond, line for line, + * with the entries of us_unusual_dev_list[]. */ +#ifndef CONFIG_USB_LIBUSUAL #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ vendorName, productName,useProtocol, useTransport, \ initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) } +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = (USB_US_TYPE_STOR<<24) } static struct usb_device_id storage_usb_ids [] = { # include "unusual_devs.h" #undef UNUSUAL_DEV - /* Control/Bulk transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) }, - - /* Control/Bulk/Interrupt transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) }, - - /* Bulk-only transport for all SubClass values */ - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) }, - { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) }, - +#undef USUAL_DEV /* Terminating entry */ { } }; MODULE_DEVICE_TABLE (usb, storage_usb_ids); +#endif /* CONFIG_USB_LIBUSUAL */ /* This is the list of devices we recognize, along with their flag data */ @@ -167,7 +151,6 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); * are free to use as many characters as you like. */ -#undef UNUSUAL_DEV #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ vendor_name, product_name, use_protocol, use_transport, \ init_function, Flags) \ @@ -177,53 +160,18 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); .useProtocol = use_protocol, \ .useTransport = use_transport, \ .initFunction = init_function, \ - .flags = Flags, \ +} + +#define USUAL_DEV(use_protocol, use_transport, use_type) \ +{ \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ } static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" # undef UNUSUAL_DEV - /* Control/Bulk transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_CB}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_CB}, - - /* Control/Bulk/Interrupt transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_CBI}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_CBI}, - - /* Bulk-only transport for all SubClass values */ - { .useProtocol = US_SC_RBC, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_8020, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_QIC, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_UFI, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_8070, - .useTransport = US_PR_BULK}, - { .useProtocol = US_SC_SCSI, - .useTransport = US_PR_BULK}, +# undef USUAL_DEV /* Terminating entry */ { NULL } @@ -484,14 +432,20 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) return 0; } +/* Find an unusual_dev descriptor (always succeeds in the current code) */ +static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) +{ + const int id_index = id - storage_usb_ids; + return &us_unusual_dev_list[id_index]; +} + /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, int id_index) +static void get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc; - struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index]; - struct usb_device_id *id = &storage_usb_ids[id_index]; + struct us_unusual_dev *unusual_dev = find_unusual(id); /* Store the entries */ us->unusual_dev = unusual_dev; @@ -501,7 +455,7 @@ static void get_device_info(struct us_data *us, int id_index) us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ? idesc->bInterfaceProtocol : unusual_dev->useTransport; - us->flags = unusual_dev->flags; + us->flags = USB_US_ORIG_FLAGS(id->driver_info); /* * This flag is only needed when we're in high-speed, so let's @@ -529,7 +483,7 @@ static void get_device_info(struct us_data *us, int id_index) if (unusual_dev->useTransport != US_PR_DEVICE && us->protocol == idesc->bInterfaceProtocol) msg += 2; - if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE)) + if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE)) printk(KERN_NOTICE USB_STORAGE "This device " "(%04x,%04x,%04x S %02x P %02x)" " has %s in unusual_devs.h\n" @@ -921,10 +875,12 @@ static int storage_probe(struct usb_interface *intf, { struct Scsi_Host *host; struct us_data *us; - const int id_index = id - storage_usb_ids; int result; struct task_struct *th; + if (usb_usual_check_type(id, USB_US_TYPE_STOR)) + return -ENXIO; + US_DEBUGP("USB Mass Storage device detected\n"); /* @@ -957,7 +913,7 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id_index); + get_device_info(us, id); #ifdef CONFIG_USB_STORAGE_SDDR09 if (us->protocol == US_PR_EUSB_SDDR09 || @@ -1062,9 +1018,10 @@ static int __init usb_stor_init(void) /* register the driver, return usb_register return code if error */ retval = usb_register(&usb_storage_driver); - if (retval == 0) + if (retval == 0) { printk(KERN_INFO "USB Mass Storage support registered.\n"); - + usb_usual_set_present(USB_US_TYPE_STOR); + } return retval; } @@ -1088,6 +1045,8 @@ static void __exit usb_stor_exit(void) wait_for_completion(&threads_gone); atomic_dec(&total_threads); } + + usb_usual_clear_present(USB_US_TYPE_STOR); } module_init(usb_stor_init); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 98b09711a73..0cd1eebc449 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -45,6 +45,7 @@ #define _USB_H_ #include +#include #include #include #include @@ -63,38 +64,8 @@ struct us_unusual_dev { __u8 useProtocol; __u8 useTransport; int (*initFunction)(struct us_data *); - unsigned int flags; }; -/* - * Static flag definitions. We use this roundabout technique so that the - * proc_info() routine can automatically display a message for each flag. - */ -#define US_DO_ALL_FLAGS \ - US_FLAG(SINGLE_LUN, 0x00000001) \ - /* allow access to only LUN 0 */ \ - US_FLAG(NEED_OVERRIDE, 0x00000002) \ - /* unusual_devs entry is necessary */ \ - US_FLAG(SCM_MULT_TARG, 0x00000004) \ - /* supports multiple targets */ \ - US_FLAG(FIX_INQUIRY, 0x00000008) \ - /* INQUIRY response needs faking */ \ - US_FLAG(FIX_CAPACITY, 0x00000010) \ - /* READ CAPACITY response too big */ \ - US_FLAG(IGNORE_RESIDUE, 0x00000020) \ - /* reported residue is wrong */ \ - US_FLAG(BULK32, 0x00000040) \ - /* Uses 32-byte CBW length */ \ - US_FLAG(NOT_LOCKABLE, 0x00000080) \ - /* PREVENT/ALLOW not supported */ \ - US_FLAG(GO_SLOW, 0x00000100) \ - /* Need delay after Command phase */ \ - US_FLAG(NO_WP_DETECT, 0x00000200) \ - /* Don't check for write-protect */ \ - -#define US_FLAG(name, value) US_FL_##name = value , -enum { US_DO_ALL_FLAGS }; -#undef US_FLAG /* Dynamic flag definitions: used in set_bit() etc. */ #define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h new file mode 100644 index 00000000000..f9c058f3371 --- /dev/null +++ b/include/linux/usb_usual.h @@ -0,0 +1,123 @@ +/* + * Interface to the libusual. + * + * Copyright (c) 2005 Pete Zaitcev + * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com) + */ + +#ifndef __LINUX_USB_USUAL_H +#define __LINUX_USB_USUAL_H + +#include + +/* We should do this for cleanliness... But other usb_foo.h do not do this. */ +/* #include */ + +/* + * The flags field, which we store in usb_device_id.driver_info. + * It is compatible with the old usb-storage flags in lower 24 bits. + */ + +/* + * Static flag definitions. We use this roundabout technique so that the + * proc_info() routine can automatically display a message for each flag. + */ +#define US_DO_ALL_FLAGS \ + US_FLAG(SINGLE_LUN, 0x00000001) \ + /* allow access to only LUN 0 */ \ + US_FLAG(NEED_OVERRIDE, 0x00000002) \ + /* unusual_devs entry is necessary */ \ + US_FLAG(SCM_MULT_TARG, 0x00000004) \ + /* supports multiple targets */ \ + US_FLAG(FIX_INQUIRY, 0x00000008) \ + /* INQUIRY response needs faking */ \ + US_FLAG(FIX_CAPACITY, 0x00000010) \ + /* READ CAPACITY response too big */ \ + US_FLAG(IGNORE_RESIDUE, 0x00000020) \ + /* reported residue is wrong */ \ + US_FLAG(BULK32, 0x00000040) \ + /* Uses 32-byte CBW length */ \ + US_FLAG(NOT_LOCKABLE, 0x00000080) \ + /* PREVENT/ALLOW not supported */ \ + US_FLAG(GO_SLOW, 0x00000100) \ + /* Need delay after Command phase */ \ + US_FLAG(NO_WP_DETECT, 0x00000200) \ + /* Don't check for write-protect */ \ + +#define US_FLAG(name, value) US_FL_##name = value , +enum { US_DO_ALL_FLAGS }; +#undef US_FLAG + +/* + * The bias field for libusual and friends. + */ +#define USB_US_TYPE_NONE 0 +#define USB_US_TYPE_STOR 1 /* usb-storage */ +#define USB_US_TYPE_UB 2 /* ub */ + +#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF) +#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF) + +/* + * This is probably not the best place to keep these constants, conceptually. + * But it's the only header included into all places which need them. + */ + +/* Sub Classes */ + +#define US_SC_RBC 0x01 /* Typically, flash devices */ +#define US_SC_8020 0x02 /* CD-ROM */ +#define US_SC_QIC 0x03 /* QIC-157 Tapes */ +#define US_SC_UFI 0x04 /* Floppy */ +#define US_SC_8070 0x05 /* Removable media */ +#define US_SC_SCSI 0x06 /* Transparent */ +#define US_SC_ISD200 0x07 /* ISD200 ATA */ +#define US_SC_MIN US_SC_RBC +#define US_SC_MAX US_SC_ISD200 + +#define US_SC_DEVICE 0xff /* Use device's value */ + +/* Protocols */ + +#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define US_PR_BULK 0x50 /* bulk only */ +#ifdef CONFIG_USB_STORAGE_USBAT +#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR09 +#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ +#endif +#ifdef CONFIG_USB_STORAGE_SDDR55 +#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ +#endif +#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ +#ifdef CONFIG_USB_STORAGE_FREECOM +#define US_PR_FREECOM 0xf1 /* Freecom */ +#endif +#ifdef CONFIG_USB_STORAGE_DATAFAB +#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ +#endif +#ifdef CONFIG_USB_STORAGE_JUMPSHOT +#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ +#endif + +#define US_PR_DEVICE 0xff /* Use device's value */ + +/* + */ +#ifdef CONFIG_USB_LIBUSUAL + +extern struct usb_device_id storage_usb_ids[]; +extern void usb_usual_set_present(int type); +extern void usb_usual_clear_present(int type); +extern int usb_usual_check_type(const struct usb_device_id *, int type); +#else + +#define usb_usual_set_present(t) do { } while(0) +#define usb_usual_clear_present(t) do { } while(0) +#define usb_usual_check_type(id, t) (0) +#endif /* CONFIG_USB_LIBUSUAL */ + +#endif /* __LINUX_USB_USUAL_H */ -- cgit v1.2.3-70-g09d2 From 5ba35bd8f9a4fa6b92ef707826c47a1466ece460 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Fri, 16 Dec 2005 00:39:36 -0800 Subject: [PATCH] USB: make bias writeable in libusual Make the bias parameter writeable. Writing the parameter does not trigger a rebind of currently attached storage devices. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/libusual.c | 53 +++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index 61f73d8a2c0..2680c69a241 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -24,10 +24,9 @@ static DEFINE_SPINLOCK(usu_lock); /* */ #define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR +static atomic_t usu_bias = ATOMIC_INIT(USB_US_DEFAULT_BIAS); #define BIAS_NAME_SIZE (sizeof("usb-storage")) -static char bias[BIAS_NAME_SIZE]; -static int usb_usual_bias; static const char *bias_names[3] = { "none", "usb-storage", "ub" }; static DECLARE_MUTEX_LOCKED(usu_init_notify); @@ -35,7 +34,6 @@ static DECLARE_COMPLETION(usu_end_notify); static atomic_t total_threads = ATOMIC_INIT(0); static int usu_probe_thread(void *arg); -static int parse_bias(const char *bias_s); /* * The table. @@ -107,7 +105,7 @@ int usb_usual_check_type(const struct usb_device_id *id, int caller_type) if (id_type == caller_type) return 0; /* Drivers grab devices biased to them */ - if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias) + if (id_type == USB_US_TYPE_NONE && caller_type == atomic_read(&usu_bias)) return 0; return -ENODEV; } @@ -124,7 +122,7 @@ static int usu_probe(struct usb_interface *intf, type = USB_US_TYPE(id->driver_info); if (type == 0) - type = usb_usual_bias; + type = atomic_read(&usu_bias); spin_lock_irqsave(&usu_lock, flags); if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) { @@ -206,9 +204,6 @@ static int __init usb_usual_init(void) { int rc; - bias[BIAS_NAME_SIZE-1] = 0; - usb_usual_bias = parse_bias(bias); - rc = usb_register(&usu_driver); up(&usu_init_notify); return rc; @@ -231,36 +226,42 @@ static void __exit usb_usual_exit(void) /* * Validate and accept the bias parameter. - * Maybe make an sysfs method later. XXX */ -static int parse_bias(const char *bias_s) +static int usu_set_bias(const char *bias_s, struct kernel_param *kp) { int i; + int len; int bias_n = 0; - if (bias_s[0] == 0 || bias_s[0] == ' ') { - bias_n = USB_US_DEFAULT_BIAS; - } else { - for (i = 1; i < 3; i++) { - if (strcmp(bias_s, bias_names[i]) == 0) { - bias_n = i; - break; - } - } - if (bias_n == 0) { - bias_n = USB_US_DEFAULT_BIAS; - printk(KERN_INFO - "libusual: unknown bias \"%s\", using \"%s\"\n", - bias_s, bias_names[bias_n]); + len = strlen(bias_s); + if (len == 0) + return -EDOM; + if (bias_s[len-1] == '\n') + --len; + + for (i = 1; i < 3; i++) { + if (strncmp(bias_s, bias_names[i], len) == 0) { + bias_n = i; + break; } } - return bias_n; + if (bias_n == 0) + return -EINVAL; + + atomic_set(&usu_bias, bias_n); + return 0; +} + +static int usu_get_bias(char *buffer, struct kernel_param *kp) +{ + return strlen(strcpy(buffer, bias_names[atomic_read(&usu_bias)])); } module_init(usb_usual_init); module_exit(usb_usual_exit); -module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR); +module_param_call(bias, usu_set_bias, usu_get_bias, NULL, S_IRUGO|S_IWUSR); +__MODULE_PARM_TYPE(bias, "string"); MODULE_PARM_DESC(bias, "Bias to usb-storage or ub"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From ddae41be6145f5f9cb4e6df35661a09121b90672 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: reorg some functions out of the main usb.c file This will make the dynamic-id stuff easier to do, as it will be self-contained. No logic was changed at all. Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/usb.tmpl | 1 + drivers/usb/core/Makefile | 2 +- drivers/usb/core/driver.c | 338 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.c | 311 ------------------------------------- drivers/usb/core/usb.h | 3 + 5 files changed, 343 insertions(+), 312 deletions(-) create mode 100644 drivers/usb/core/driver.c (limited to 'drivers') diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 15ce0f21e5e..320af25de3a 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -253,6 +253,7 @@ !Edrivers/usb/core/urb.c !Edrivers/usb/core/message.c !Edrivers/usb/core/file.c +!Edrivers/usb/core/driver.c !Edrivers/usb/core/usb.c !Edrivers/usb/core/hub.c diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 86d5c380892..28329ddf187 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -2,7 +2,7 @@ # Makefile for USB Core files and filesystem # -usbcore-objs := usb.o hub.o hcd.o urb.o message.o \ +usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \ config.o file.o buffer.o sysfs.o devio.o notify.o ifeq ($(CONFIG_PCI),y) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c new file mode 100644 index 00000000000..921a21be651 --- /dev/null +++ b/drivers/usb/core/driver.c @@ -0,0 +1,338 @@ +/* + * drivers/usb/driver.c - most of the driver model stuff for usb + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * NOTE! This is not actually a driver at all, rather this is + * just a collection of helper routines that implement the + * generic USB things that the real drivers can use.. + * + */ + +#include +#include +#include +#include "hcd.h" +#include "usb.h" + +static int generic_probe(struct device *dev) +{ + return 0; +} +static int generic_remove(struct device *dev) +{ + struct usb_device *udev = to_usb_device(dev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->state == USB_STATE_CONFIGURED) + usb_set_configuration(udev, 0); + + /* in case the call failed or the device was suspended */ + if (udev->state >= USB_STATE_CONFIGURED) + usb_disable_device(udev, 0); + return 0; +} + +struct device_driver usb_generic_driver = { + .owner = THIS_MODULE, + .name = "usb", + .bus = &usb_bus_type, + .probe = generic_probe, + .remove = generic_remove, +}; + +/* Fun hack to determine if the struct device is a + * usb device or a usb interface. */ +int usb_generic_driver_data; + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_probe_interface(struct device *dev) +{ + struct usb_interface * intf = to_usb_interface(dev); + struct usb_driver * driver = to_usb_driver(dev->driver); + const struct usb_device_id *id; + int error = -ENODEV; + + dev_dbg(dev, "%s\n", __FUNCTION__); + + if (!driver->probe) + return error; + /* FIXME we'd much prefer to just resume it ... */ + if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) + return -EHOSTUNREACH; + + id = usb_match_id(intf, driver->id_table); + if (id) { + dev_dbg(dev, "%s - got id\n", __FUNCTION__); + + /* Interface "power state" doesn't correspond to any hardware + * state whatsoever. We use it to record when it's bound to + * a driver that may start I/0: it's not frozen/quiesced. + */ + mark_active(intf); + intf->condition = USB_INTERFACE_BINDING; + error = driver->probe(intf, id); + if (error) { + mark_quiesced(intf); + intf->condition = USB_INTERFACE_UNBOUND; + } else + intf->condition = USB_INTERFACE_BOUND; + } + + return error; +} + +/* called from driver core with usb_bus_type.subsys writelock */ +static int usb_unbind_interface(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_driver *driver = to_usb_driver(intf->dev.driver); + + intf->condition = USB_INTERFACE_UNBINDING; + + /* release all urbs for this interface */ + usb_disable_interface(interface_to_usbdev(intf), intf); + + if (driver && driver->disconnect) + driver->disconnect(intf); + + /* reset other interface state */ + usb_set_interface(interface_to_usbdev(intf), + intf->altsetting[0].desc.bInterfaceNumber, + 0); + usb_set_intfdata(intf, NULL); + intf->condition = USB_INTERFACE_UNBOUND; + mark_quiesced(intf); + + return 0; +} + +/** + * usb_match_id - find first usb_device_id matching device or interface + * @interface: the interface of interest + * @id: array of usb_device_id structures, terminated by zero entry + * + * usb_match_id searches an array of usb_device_id's and returns + * the first one matching the device or interface, or null. + * This is used when binding (or rebinding) a driver to an interface. + * Most USB device drivers will use this indirectly, through the usb core, + * but some layered driver frameworks use it directly. + * These device tables are exported with MODULE_DEVICE_TABLE, through + * modutils, to support the driver loading functionality of USB hotplugging. + * + * What Matches: + * + * The "match_flags" element in a usb_device_id controls which + * members are used. If the corresponding bit is set, the + * value in the device_id must match its corresponding member + * in the device or interface descriptor, or else the device_id + * does not match. + * + * "driver_info" is normally used only by device drivers, + * but you can create a wildcard "matches anything" usb_device_id + * as a driver's "modules.usbmap" entry if you provide an id with + * only a nonzero "driver_info" field. If you do this, the USB device + * driver's probe() routine should use additional intelligence to + * decide whether to bind to the specified interface. + * + * What Makes Good usb_device_id Tables: + * + * The match algorithm is very simple, so that intelligence in + * driver selection must come from smart driver id records. + * Unless you have good reasons to use another selection policy, + * provide match elements only in related groups, and order match + * specifiers from specific to general. Use the macros provided + * for that purpose if you can. + * + * The most specific match specifiers use device descriptor + * data. These are commonly used with product-specific matches; + * the USB_DEVICE macro lets you provide vendor and product IDs, + * and you can also match against ranges of product revisions. + * These are widely used for devices with application or vendor + * specific bDeviceClass values. + * + * Matches based on device class/subclass/protocol specifications + * are slightly more general; use the USB_DEVICE_INFO macro, or + * its siblings. These are used with single-function devices + * where bDeviceClass doesn't specify that each interface has + * its own class. + * + * Matches based on interface class/subclass/protocol are the + * most general; they let drivers bind to any interface on a + * multiple-function device. Use the USB_INTERFACE_INFO + * macro, or its siblings, to match class-per-interface style + * devices (as recorded in bDeviceClass). + * + * Within those groups, remember that not all combinations are + * meaningful. For example, don't give a product version range + * without vendor and product IDs; or specify a protocol without + * its associated class and subclass. + */ +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return NULL; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + /* It is important to check that id->driver_info is nonzero, + since an entry that is all zeroes except for a nonzero + id->driver_info is the way to create an entry that + indicates that the driver want to examine every + device and interface. */ + for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || + id->driver_info; id++) { + + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + continue; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + continue; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + continue; + + return id; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_match_id); + +int usb_device_match(struct device *dev, struct device_driver *drv) +{ + struct usb_interface *intf; + struct usb_driver *usb_drv; + const struct usb_device_id *id; + + /* check for generic driver, which we don't match any device with */ + if (drv == &usb_generic_driver) + return 0; + + intf = to_usb_interface(dev); + usb_drv = to_usb_driver(drv); + + id = usb_match_id(intf, usb_drv->id_table); + if (id) + return 1; + + return 0; +} + +/** + * usb_register - register a USB driver + * @new_driver: USB operations for the driver + * + * Registers a USB driver with the USB core. The list of unattached + * interfaces will be rescanned whenever a new driver is added, allowing + * the new driver to attach to any recognized devices. + * Returns a negative error code on failure and 0 on success. + * + * NOTE: if you want your driver to use the USB major number, you must call + * usb_register_dev() to enable that functionality. This function no longer + * takes care of that. + */ +int usb_register(struct usb_driver *new_driver) +{ + int retval = 0; + + if (usb_disabled()) + return -ENODEV; + + new_driver->driver.name = (char *)new_driver->name; + new_driver->driver.bus = &usb_bus_type; + new_driver->driver.probe = usb_probe_interface; + new_driver->driver.remove = usb_unbind_interface; + new_driver->driver.owner = new_driver->owner; + + usb_lock_all_devices(); + retval = driver_register(&new_driver->driver); + usb_unlock_all_devices(); + + if (!retval) { + pr_info("%s: registered new driver %s\n", + usbcore_name, new_driver->name); + usbfs_update_special(); + } else { + printk(KERN_ERR "%s: error %d registering driver %s\n", + usbcore_name, retval, new_driver->name); + } + + return retval; +} +EXPORT_SYMBOL_GPL(usb_register); + +/** + * usb_deregister - unregister a USB driver + * @driver: USB operations of the driver to unregister + * Context: must be able to sleep + * + * Unlinks the specified driver from the internal USB driver list. + * + * NOTE: If you called usb_register_dev(), you still need to call + * usb_deregister_dev() to clean up your driver's allocated minor numbers, + * this * call will no longer do it for you. + */ +void usb_deregister(struct usb_driver *driver) +{ + pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); + + usb_lock_all_devices(); + driver_unregister(&driver->driver); + usb_unlock_all_devices(); + + usbfs_update_special(); +} +EXPORT_SYMBOL_GPL(usb_deregister); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e80ef946782..294e9f12747 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -52,161 +52,6 @@ static int nousb; /* Disable USB when built into kernel image */ static DECLARE_RWSEM(usb_all_devices_rwsem); -static int generic_probe (struct device *dev) -{ - return 0; -} -static int generic_remove (struct device *dev) -{ - struct usb_device *udev = to_usb_device(dev); - - /* if this is only an unbind, not a physical disconnect, then - * unconfigure the device */ - if (udev->state == USB_STATE_CONFIGURED) - usb_set_configuration(udev, 0); - - /* in case the call failed or the device was suspended */ - if (udev->state >= USB_STATE_CONFIGURED) - usb_disable_device(udev, 0); - return 0; -} - -static struct device_driver usb_generic_driver = { - .owner = THIS_MODULE, - .name = "usb", - .bus = &usb_bus_type, - .probe = generic_probe, - .remove = generic_remove, -}; - -static int usb_generic_driver_data; - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_probe_interface(struct device *dev) -{ - struct usb_interface * intf = to_usb_interface(dev); - struct usb_driver * driver = to_usb_driver(dev->driver); - const struct usb_device_id *id; - int error = -ENODEV; - - dev_dbg(dev, "%s\n", __FUNCTION__); - - if (!driver->probe) - return error; - /* FIXME we'd much prefer to just resume it ... */ - if (interface_to_usbdev(intf)->state == USB_STATE_SUSPENDED) - return -EHOSTUNREACH; - - id = usb_match_id (intf, driver->id_table); - if (id) { - dev_dbg (dev, "%s - got id\n", __FUNCTION__); - - /* Interface "power state" doesn't correspond to any hardware - * state whatsoever. We use it to record when it's bound to - * a driver that may start I/0: it's not frozen/quiesced. - */ - mark_active(intf); - intf->condition = USB_INTERFACE_BINDING; - error = driver->probe (intf, id); - if (error) { - mark_quiesced(intf); - intf->condition = USB_INTERFACE_UNBOUND; - } else - intf->condition = USB_INTERFACE_BOUND; - } - - return error; -} - -/* called from driver core with usb_bus_type.subsys writelock */ -static int usb_unbind_interface(struct device *dev) -{ - struct usb_interface *intf = to_usb_interface(dev); - struct usb_driver *driver = to_usb_driver(intf->dev.driver); - - intf->condition = USB_INTERFACE_UNBINDING; - - /* release all urbs for this interface */ - usb_disable_interface(interface_to_usbdev(intf), intf); - - if (driver && driver->disconnect) - driver->disconnect(intf); - - /* reset other interface state */ - usb_set_interface(interface_to_usbdev(intf), - intf->altsetting[0].desc.bInterfaceNumber, - 0); - usb_set_intfdata(intf, NULL); - intf->condition = USB_INTERFACE_UNBOUND; - mark_quiesced(intf); - - return 0; -} - -/** - * usb_register - register a USB driver - * @new_driver: USB operations for the driver - * - * Registers a USB driver with the USB core. The list of unattached - * interfaces will be rescanned whenever a new driver is added, allowing - * the new driver to attach to any recognized devices. - * Returns a negative error code on failure and 0 on success. - * - * NOTE: if you want your driver to use the USB major number, you must call - * usb_register_dev() to enable that functionality. This function no longer - * takes care of that. - */ -int usb_register(struct usb_driver *new_driver) -{ - int retval = 0; - - if (nousb) - return -ENODEV; - - new_driver->driver.name = (char *)new_driver->name; - new_driver->driver.bus = &usb_bus_type; - new_driver->driver.probe = usb_probe_interface; - new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = new_driver->owner; - - usb_lock_all_devices(); - retval = driver_register(&new_driver->driver); - usb_unlock_all_devices(); - - if (!retval) { - pr_info("%s: registered new driver %s\n", - usbcore_name, new_driver->name); - usbfs_update_special(); - } else { - printk(KERN_ERR "%s: error %d registering driver %s\n", - usbcore_name, retval, new_driver->name); - } - - return retval; -} - -/** - * usb_deregister - unregister a USB driver - * @driver: USB operations of the driver to unregister - * Context: must be able to sleep - * - * Unlinks the specified driver from the internal USB driver list. - * - * NOTE: If you called usb_register_dev(), you still need to call - * usb_deregister_dev() to clean up your driver's allocated minor numbers, - * this * call will no longer do it for you. - */ -void usb_deregister(struct usb_driver *driver) -{ - pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); - - usb_lock_all_devices(); - driver_unregister (&driver->driver); - usb_unlock_all_devices(); - - usbfs_update_special(); -} - /** * usb_ifnum_to_if - get the interface object with a given interface number * @dev: the device whose current configuration is considered @@ -352,138 +197,6 @@ void usb_driver_release_interface(struct usb_driver *driver, mark_quiesced(iface); } -/** - * usb_match_id - find first usb_device_id matching device or interface - * @interface: the interface of interest - * @id: array of usb_device_id structures, terminated by zero entry - * - * usb_match_id searches an array of usb_device_id's and returns - * the first one matching the device or interface, or null. - * This is used when binding (or rebinding) a driver to an interface. - * Most USB device drivers will use this indirectly, through the usb core, - * but some layered driver frameworks use it directly. - * These device tables are exported with MODULE_DEVICE_TABLE, through - * modutils and "modules.usbmap", to support the driver loading - * functionality of USB hotplugging. - * - * What Matches: - * - * The "match_flags" element in a usb_device_id controls which - * members are used. If the corresponding bit is set, the - * value in the device_id must match its corresponding member - * in the device or interface descriptor, or else the device_id - * does not match. - * - * "driver_info" is normally used only by device drivers, - * but you can create a wildcard "matches anything" usb_device_id - * as a driver's "modules.usbmap" entry if you provide an id with - * only a nonzero "driver_info" field. If you do this, the USB device - * driver's probe() routine should use additional intelligence to - * decide whether to bind to the specified interface. - * - * What Makes Good usb_device_id Tables: - * - * The match algorithm is very simple, so that intelligence in - * driver selection must come from smart driver id records. - * Unless you have good reasons to use another selection policy, - * provide match elements only in related groups, and order match - * specifiers from specific to general. Use the macros provided - * for that purpose if you can. - * - * The most specific match specifiers use device descriptor - * data. These are commonly used with product-specific matches; - * the USB_DEVICE macro lets you provide vendor and product IDs, - * and you can also match against ranges of product revisions. - * These are widely used for devices with application or vendor - * specific bDeviceClass values. - * - * Matches based on device class/subclass/protocol specifications - * are slightly more general; use the USB_DEVICE_INFO macro, or - * its siblings. These are used with single-function devices - * where bDeviceClass doesn't specify that each interface has - * its own class. - * - * Matches based on interface class/subclass/protocol are the - * most general; they let drivers bind to any interface on a - * multiple-function device. Use the USB_INTERFACE_INFO - * macro, or its siblings, to match class-per-interface style - * devices (as recorded in bDeviceClass). - * - * Within those groups, remember that not all combinations are - * meaningful. For example, don't give a product version range - * without vendor and product IDs; or specify a protocol without - * its associated class and subclass. - */ -const struct usb_device_id * -usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_host_interface *intf; - struct usb_device *dev; - - /* proc_connectinfo in devio.c may call us with id == NULL. */ - if (id == NULL) - return NULL; - - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - - /* It is important to check that id->driver_info is nonzero, - since an entry that is all zeroes except for a nonzero - id->driver_info is the way to create an entry that - indicates that the driver want to examine every - device and interface. */ - for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || - id->driver_info; id++) { - - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && - id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && - id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) - continue; - - /* No need to test id->bcdDevice_lo != 0, since 0 is never - greater than any unsigned number. */ - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && - (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && - (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && - (id->bDeviceClass != dev->descriptor.bDeviceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && - (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && - (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && - (id->bInterfaceClass != intf->desc.bInterfaceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && - (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && - (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) - continue; - - return id; - } - - return NULL; -} - - static int __find_interface(struct device * dev, void * data) { struct usb_interface ** ret = (struct usb_interface **)data; @@ -521,27 +234,6 @@ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) return ret ? intf : NULL; } -static int usb_device_match (struct device *dev, struct device_driver *drv) -{ - struct usb_interface *intf; - struct usb_driver *usb_drv; - const struct usb_device_id *id; - - /* check for generic driver, which we don't match any device with */ - if (drv == &usb_generic_driver) - return 0; - - intf = to_usb_interface(dev); - usb_drv = to_usb_driver(drv); - - id = usb_match_id (intf, usb_drv->id_table); - if (id) - return 1; - - return 0; -} - - #ifdef CONFIG_HOTPLUG /* @@ -1598,8 +1290,6 @@ module_exit(usb_exit); * driver modules to use. */ -EXPORT_SYMBOL(usb_register); -EXPORT_SYMBOL(usb_deregister); EXPORT_SYMBOL(usb_disabled); EXPORT_SYMBOL_GPL(usb_get_intf); @@ -1617,7 +1307,6 @@ EXPORT_SYMBOL(usb_unlock_device); EXPORT_SYMBOL(usb_driver_claim_interface); EXPORT_SYMBOL(usb_driver_release_interface); -EXPORT_SYMBOL(usb_match_id); EXPORT_SYMBOL(usb_find_interface); EXPORT_SYMBOL(usb_ifnum_to_if); EXPORT_SYMBOL(usb_altnum_to_altsetting); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 1c4a68499dc..98e85fb4d3b 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -33,6 +33,9 @@ extern void usb_host_cleanup(void); extern int usb_suspend_device(struct usb_device *dev); extern int usb_resume_device(struct usb_device *dev); +extern struct device_driver usb_generic_driver; +extern int usb_generic_driver_data; +extern int usb_device_match(struct device *dev, struct device_driver *drv); /* Interfaces and their "power state" are owned by usbcore */ -- cgit v1.2.3-70-g09d2 From 733260ff9c45bd4db60f45d17e8560a4a68dff4d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: add dynamic id functionality to USB core Echo the usb vendor and product id to the "new_id" file in the driver's sysfs directory, and then that driver will be able to bind to a device with those ids if it is present. Example: echo 0557 2008 > /sys/bus/usb/drivers/foo_driver/new_id adds the hex values 0557 and 2008 to the device id table for the foo_driver. Note, usb-serial drivers do not currently work with this capability yet. usb-storage also might have some oddities. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 218 +++++++++++++++++++++++++++++++++++----------- include/linux/usb.h | 8 ++ 2 files changed, 176 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 921a21be651..1c061104537 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -27,6 +27,15 @@ #include "hcd.h" #include "usb.h" +static int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id); + +struct usb_dynid { + struct list_head node; + struct usb_device_id id; +}; + + static int generic_probe(struct device *dev) { return 0; @@ -58,6 +67,96 @@ struct device_driver usb_generic_driver = { * usb device or a usb interface. */ int usb_generic_driver_data; +#ifdef CONFIG_HOTPLUG + +/* + * Adds a new dynamic USBdevice ID to this driver, + * and cause the driver to probe for all devices again. + */ +static ssize_t store_new_id(struct device_driver *driver, + const char *buf, size_t count) +{ + struct usb_driver *usb_drv = to_usb_driver(driver); + struct usb_dynid *dynid; + u32 idVendor = 0; + u32 idProduct = 0; + int fields = 0; + + fields = sscanf(buf, "%x %x", &idVendor, &idProduct); + if (fields < 2) + return -EINVAL; + + dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); + if (!dynid) + return -ENOMEM; + + INIT_LIST_HEAD(&dynid->node); + dynid->id.idVendor = idVendor; + dynid->id.idProduct = idProduct; + dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + + spin_lock(&usb_drv->dynids.lock); + list_add_tail(&usb_drv->dynids.list, &dynid->node); + spin_unlock(&usb_drv->dynids.lock); + + if (get_driver(driver)) { + driver_attach(driver); + put_driver(driver); + } + + return count; +} +static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); + +static int usb_create_newid_file(struct usb_driver *usb_drv) +{ + int error = 0; + + if (usb_drv->probe != NULL) + error = sysfs_create_file(&usb_drv->driver.kobj, + &driver_attr_new_id.attr); + return error; +} + +static void usb_free_dynids(struct usb_driver *usb_drv) +{ + struct usb_dynid *dynid, *n; + + spin_lock(&usb_drv->dynids.lock); + list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) { + list_del(&dynid->node); + kfree(dynid); + } + spin_unlock(&usb_drv->dynids.lock); +} +#else +static inline int usb_create_newid_file(struct usb_driver *usb_drv) +{ + return 0; +} + +static inline void usb_free_dynids(struct usb_driver *usb_drv) +{ +} +#endif + +static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf, + struct usb_driver *drv) +{ + struct usb_dynid *dynid; + + spin_lock(&drv->dynids.lock); + list_for_each_entry(dynid, &drv->dynids.list, node) { + if (usb_match_one_id(intf, &dynid->id)) { + spin_unlock(&drv->dynids.lock); + return &dynid->id; + } + } + spin_unlock(&drv->dynids.lock); + return NULL; +} + + /* called from driver core with usb_bus_type.subsys writelock */ static int usb_probe_interface(struct device *dev) { @@ -75,6 +174,8 @@ static int usb_probe_interface(struct device *dev) return -EHOSTUNREACH; id = usb_match_id(intf, driver->id_table); + if (!id) + id = usb_match_dynamic_id(intf, driver); if (id) { dev_dbg(dev, "%s - got id\n", __FUNCTION__); @@ -120,6 +221,64 @@ static int usb_unbind_interface(struct device *dev) return 0; } +/* returns 0 if no match, 1 if match */ +static int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *intf; + struct usb_device *dev; + + /* proc_connectinfo in devio.c may call us with id == NULL. */ + if (id == NULL) + return 0; + + intf = interface->cur_altsetting; + dev = interface_to_usbdev(interface); + + if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && + id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && + id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) + return 0; + + /* No need to test id->bcdDevice_lo != 0, since 0 is never + greater than any unsigned number. */ + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && + (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && + (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && + (id->bDeviceClass != dev->descriptor.bDeviceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && + (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && + (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && + (id->bInterfaceClass != intf->desc.bInterfaceClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && + (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) + return 0; + + if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && + (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) + return 0; + + return 1; +} /** * usb_match_id - find first usb_device_id matching device or interface * @interface: the interface of interest @@ -184,16 +343,10 @@ static int usb_unbind_interface(struct device *dev) const struct usb_device_id *usb_match_id(struct usb_interface *interface, const struct usb_device_id *id) { - struct usb_host_interface *intf; - struct usb_device *dev; - /* proc_connectinfo in devio.c may call us with id == NULL. */ if (id == NULL) return NULL; - intf = interface->cur_altsetting; - dev = interface_to_usbdev(interface); - /* It is important to check that id->driver_info is nonzero, since an entry that is all zeroes except for a nonzero id->driver_info is the way to create an entry that @@ -201,50 +354,8 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface, device and interface. */ for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass || id->driver_info; id++) { - - if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && - id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && - id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) - continue; - - /* No need to test id->bcdDevice_lo != 0, since 0 is never - greater than any unsigned number. */ - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && - (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && - (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && - (id->bDeviceClass != dev->descriptor.bDeviceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && - (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && - (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) && - (id->bInterfaceClass != intf->desc.bInterfaceClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) && - (id->bInterfaceSubClass != intf->desc.bInterfaceSubClass)) - continue; - - if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) && - (id->bInterfaceProtocol != intf->desc.bInterfaceProtocol)) - continue; - - return id; + if (usb_match_one_id(interface, id)) + return id; } return NULL; @@ -268,6 +379,9 @@ int usb_device_match(struct device *dev, struct device_driver *drv) if (id) return 1; + id = usb_match_dynamic_id(intf, usb_drv); + if (id) + return 1; return 0; } @@ -296,6 +410,8 @@ int usb_register(struct usb_driver *new_driver) new_driver->driver.probe = usb_probe_interface; new_driver->driver.remove = usb_unbind_interface; new_driver->driver.owner = new_driver->owner; + spin_lock_init(&new_driver->dynids.lock); + INIT_LIST_HEAD(&new_driver->dynids.list); usb_lock_all_devices(); retval = driver_register(&new_driver->driver); @@ -305,6 +421,7 @@ int usb_register(struct usb_driver *new_driver) pr_info("%s: registered new driver %s\n", usbcore_name, new_driver->name); usbfs_update_special(); + usb_create_newid_file(new_driver); } else { printk(KERN_ERR "%s: error %d registering driver %s\n", usbcore_name, retval, new_driver->name); @@ -330,6 +447,7 @@ void usb_deregister(struct usb_driver *driver) pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); usb_lock_all_devices(); + usb_free_dynids(driver); driver_unregister(&driver->driver); usb_unlock_all_devices(); diff --git a/include/linux/usb.h b/include/linux/usb.h index d81b050e595..0dd96ef78c1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -529,6 +529,11 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, /* ----------------------------------------------------------------------- */ +struct usb_dynids { + spinlock_t lock; + struct list_head list; +}; + /** * struct usb_driver - identifies USB driver to usbcore * @owner: Pointer to the module owner of this driver; initialize @@ -553,6 +558,8 @@ static inline int usb_make_path (struct usb_device *dev, char *buf, * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. + * @dynids: used internally to hold the list of dynamically added device + * ids for this driver. * @driver: the driver model core driver structure. * * USB drivers must provide a name, probe() and disconnect() methods, @@ -588,6 +595,7 @@ struct usb_driver { const struct usb_device_id *id_table; + struct usb_dynids dynids; struct device_driver driver; }; #define to_usb_driver(d) container_of(d, struct usb_driver, driver) -- cgit v1.2.3-70-g09d2 From ba9dc657af86d05d2971633e57d1f6f94ed60472 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 16 Nov 2005 13:41:28 -0800 Subject: [PATCH] USB: allow usb drivers to disable dynamic ids This lets drivers, like the usb-serial ones, disable the ability to add ids from sysfs. The usb-serial drivers are "odd" in that they are really usb-serial bus drivers, not usb bus drivers, so the dynamic id logic will have to go into the usb-serial bus core for those drivers to get that ability. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 19 +++++++++++++++++++ drivers/usb/serial/airprime.c | 1 + drivers/usb/serial/anydata.c | 1 + drivers/usb/serial/belkin_sa.c | 1 + drivers/usb/serial/cp2101.c | 1 + drivers/usb/serial/cyberjack.c | 1 + drivers/usb/serial/cypress_m8.c | 1 + drivers/usb/serial/digi_acceleport.c | 1 + drivers/usb/serial/empeg.c | 1 + drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/garmin_gps.c | 1 + drivers/usb/serial/generic.c | 1 + drivers/usb/serial/hp4x.c | 1 + drivers/usb/serial/io_edgeport.c | 1 + drivers/usb/serial/io_ti.c | 1 + drivers/usb/serial/ipaq.c | 1 + drivers/usb/serial/ipw.c | 1 + drivers/usb/serial/ir-usb.c | 1 + drivers/usb/serial/keyspan.h | 1 + drivers/usb/serial/keyspan_pda.c | 1 + drivers/usb/serial/kl5kusb105.c | 1 + drivers/usb/serial/kobil_sct.c | 1 + drivers/usb/serial/mct_u232.c | 1 + drivers/usb/serial/omninet.c | 1 + drivers/usb/serial/option.c | 1 + drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/safe_serial.c | 1 + drivers/usb/serial/ti_usb_3410_5052.c | 1 + drivers/usb/serial/usb-serial.c | 1 + drivers/usb/serial/visor.c | 1 + drivers/usb/serial/whiteheat.c | 1 + include/linux/usb.h | 3 +++ 32 files changed, 52 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 1c061104537..5e65bc258e1 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -112,12 +112,26 @@ static int usb_create_newid_file(struct usb_driver *usb_drv) { int error = 0; + if (usb_drv->no_dynamic_id) + goto exit; + if (usb_drv->probe != NULL) error = sysfs_create_file(&usb_drv->driver.kobj, &driver_attr_new_id.attr); +exit: return error; } +static void usb_remove_newid_file(struct usb_driver *usb_drv) +{ + if (usb_drv->no_dynamic_id) + return; + + if (usb_drv->probe != NULL) + sysfs_remove_file(&usb_drv->driver.kobj, + &driver_attr_new_id.attr); +} + static void usb_free_dynids(struct usb_driver *usb_drv) { struct usb_dynid *dynid, *n; @@ -135,6 +149,10 @@ static inline int usb_create_newid_file(struct usb_driver *usb_drv) return 0; } +static void usb_remove_newid_file(struct usb_driver *usb_drv) +{ +} + static inline void usb_free_dynids(struct usb_driver *usb_drv) { } @@ -447,6 +465,7 @@ void usb_deregister(struct usb_driver *driver) pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); usb_lock_all_devices(); + usb_remove_newid_file(driver); usb_free_dynids(driver); driver_unregister(&driver->driver); usb_unlock_all_devices(); diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 1f29d883732..2ef9945a6c0 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -28,6 +28,7 @@ static struct usb_driver airprime_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver airprime_device = { diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c index 18022a74a3d..7a171e034b5 100644 --- a/drivers/usb/serial/anydata.c +++ b/drivers/usb/serial/anydata.c @@ -32,6 +32,7 @@ static struct usb_driver anydata_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static int anydata_open(struct usb_serial_port *port, struct file *filp) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 84bc0ee4f06..69039bd9fc5 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -118,6 +118,7 @@ static struct usb_driver belkin_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* All of the device info needed for the serial converters */ diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index c9787001cf2..813bab37e07 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_driver cp2101_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver cp2101_device = { diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index e581e4ae848..8c10e400490 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -81,6 +81,7 @@ static struct usb_driver cyberjack_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver cyberjack_device = { diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index af9290ed257..af18355e94c 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -112,6 +112,7 @@ static struct usb_driver cypress_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; struct cypress_private { diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index dc74644a603..c50cec95f49 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -498,6 +498,7 @@ static struct usb_driver digi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 0b0546dcc7b..e5e40064caf 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -110,6 +110,7 @@ static struct usb_driver empeg_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver empeg_device = { diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 06e04b442ff..857fe791d70 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -488,6 +488,7 @@ static struct usb_driver ftdi_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static char *ftdi_chip_name[] = { diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 35820bda7ae..198a322286f 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -227,6 +227,7 @@ static struct usb_driver garmin_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 53a47c31cd0..c00a440dc42 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -73,6 +73,7 @@ static struct usb_driver generic_driver = { .probe = generic_probe, .disconnect = usb_serial_disconnect, .id_table = generic_serial_ids, + .no_dynamic_id = 1, }; #endif diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index 8eadfb70560..e588c3fe632 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -42,6 +42,7 @@ static struct usb_driver hp49gp_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver hp49gp_device = { diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index dc4c498bd1e..276bd425a47 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -247,6 +247,7 @@ static struct usb_driver io_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* function prototypes for all of our local functions */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 832b6d6734c..8b2e4c78abc 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -221,6 +221,7 @@ static struct usb_driver io_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d5d06648810..efb568be701 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -547,6 +547,7 @@ static struct usb_driver ipaq_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ipaq_id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 7744b8148bc..64e2cda2a84 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -157,6 +157,7 @@ static struct usb_driver usb_ipw_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = usb_ipw_ids, + .no_dynamic_id = 1, }; static int debug; diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 19f329e9bdc..647431c1ccb 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -130,6 +130,7 @@ static struct usb_driver ir_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 5cfc13b5e56..4e6f626f606 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -525,6 +525,7 @@ static struct usb_driver keyspan_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = keyspan_ids_combined, + .no_dynamic_id = 1, }; /* usb_device_id table for the pre-firmware download keyspan devices */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index cd4f48bd83b..0d1f1526854 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -155,6 +155,7 @@ static struct usb_driver keyspan_pda_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static struct usb_device_id id_table_std [] = { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index a8951c0fd02..bd68638b7c3 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -121,6 +121,7 @@ static struct usb_driver kl5kusb105d_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static struct usb_serial_driver kl5kusb105d_device = { diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 9456dd9dd13..4c853afea38 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -102,6 +102,7 @@ static struct usb_driver kobil_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index ca5dbadb9b7..b0415e7542c 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -130,6 +130,7 @@ static struct usb_driver mct_u232_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; static struct usb_serial_driver mct_u232_device = { diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 3caf97072ac..b595befb24c 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -85,6 +85,7 @@ static struct usb_driver omninet_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7716000045b..4ee657eaaa0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -100,6 +100,7 @@ static struct usb_driver option_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = option_ids, + .no_dynamic_id = 1, }; /* The card has three separate interfaces, wich the serial driver diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 41a45a5025b..e302a320444 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -87,6 +87,7 @@ static struct usb_driver pl2303_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; #define SET_LINE_REQUEST_TYPE 0x21 diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index c22bdc0c4df..f8241c15204 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -165,6 +165,7 @@ static struct usb_driver safe_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, + .no_dynamic_id = 1, }; static __u16 crc10_table[256] = { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 205dbf7201d..17a1f09483b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -253,6 +253,7 @@ static struct usb_driver ti_usb_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = ti_id_table_combined, + .no_dynamic_id = 1, }; static struct usb_serial_driver ti_1port_device = { diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0c4881d18cd..2ac37b52485 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -46,6 +46,7 @@ static struct usb_driver usb_serial_driver = { .name = "usbserial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .no_dynamic_id = 1, }; /* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index a473c1c3455..2973f5564c0 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -178,6 +178,7 @@ static struct usb_driver visor_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 18c3183be76..19c6386bb69 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -132,6 +132,7 @@ static struct usb_driver whiteheat_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table_combined, + .no_dynamic_id = 1, }; /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 0dd96ef78c1..8d5829936bc 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -561,6 +561,8 @@ struct usb_dynids { * @dynids: used internally to hold the list of dynamically added device * ids for this driver. * @driver: the driver model core driver structure. + * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be + * added to this driver by preventing the sysfs file from being created. * * USB drivers must provide a name, probe() and disconnect() methods, * and an id_table. Other driver fields are optional. @@ -597,6 +599,7 @@ struct usb_driver { struct usb_dynids dynids; struct device_driver driver; + unsigned int no_dynamic_id:1; }; #define to_usb_driver(d) container_of(d, struct usb_driver, driver) -- cgit v1.2.3-70-g09d2 From 2143acc6dc79bdbff812f02a7dc5ab9d4fc81fc8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 21 Nov 2005 14:53:03 -0800 Subject: [PATCH] USB: make registering a usb driver automatically set the module owner This fixes the driver that forgot to set the module owner up. Now we can remove the unneeded pointer from the usb driver structure. The idea for how to do this was from Al Viro, who did this for the PCI drivers. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 9 +++++---- include/linux/usb.h | 6 +++++- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 5e65bc258e1..bb139f06bcd 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -404,8 +404,9 @@ int usb_device_match(struct device *dev, struct device_driver *drv) } /** - * usb_register - register a USB driver + * usb_register_driver - register a USB driver * @new_driver: USB operations for the driver + * @owner: module owner of this driver. * * Registers a USB driver with the USB core. The list of unattached * interfaces will be rescanned whenever a new driver is added, allowing @@ -416,7 +417,7 @@ int usb_device_match(struct device *dev, struct device_driver *drv) * usb_register_dev() to enable that functionality. This function no longer * takes care of that. */ -int usb_register(struct usb_driver *new_driver) +int usb_register_driver(struct usb_driver *new_driver, struct module *owner) { int retval = 0; @@ -427,7 +428,7 @@ int usb_register(struct usb_driver *new_driver) new_driver->driver.bus = &usb_bus_type; new_driver->driver.probe = usb_probe_interface; new_driver->driver.remove = usb_unbind_interface; - new_driver->driver.owner = new_driver->owner; + new_driver->driver.owner = owner; spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); @@ -447,7 +448,7 @@ int usb_register(struct usb_driver *new_driver) return retval; } -EXPORT_SYMBOL_GPL(usb_register); +EXPORT_SYMBOL_GPL(usb_register_driver); /** * usb_deregister - unregister a USB driver diff --git a/include/linux/usb.h b/include/linux/usb.h index 8d5829936bc..3d05c63451a 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -625,7 +625,11 @@ struct usb_class_driver { * use these in module_init()/module_exit() * and don't forget MODULE_DEVICE_TABLE(usb, ...) */ -extern int usb_register(struct usb_driver *); +int usb_register_driver(struct usb_driver *, struct module *); +static inline int usb_register(struct usb_driver *driver) +{ + return usb_register_driver(driver, THIS_MODULE); +} extern void usb_deregister(struct usb_driver *); extern int usb_register_dev(struct usb_interface *intf, -- cgit v1.2.3-70-g09d2 From 75318d2d7cab77b14c5d3dbd5e69f2680a769e16 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 21 Nov 2005 14:53:03 -0800 Subject: [PATCH] USB: remove .owner field from struct usb_driver It is no longer needed, so let's remove it, saving a bit of memory. Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 1 - drivers/bluetooth/bcm203x.c | 1 - drivers/bluetooth/bfusb.c | 1 - drivers/bluetooth/bpa10x.c | 1 - drivers/bluetooth/hci_usb.c | 1 - drivers/char/watchdog/pcwd_usb.c | 1 - drivers/input/joystick/iforce/iforce-usb.c | 1 - drivers/isdn/hisax/hfc_usb.c | 1 - drivers/isdn/hisax/st5481_init.c | 1 - drivers/media/dvb/b2c2/flexcop-usb.c | 1 - drivers/media/dvb/cinergyT2/cinergyT2.c | 1 - drivers/media/dvb/dvb-usb/a800.c | 1 - drivers/media/dvb/dvb-usb/cxusb.c | 1 - drivers/media/dvb/dvb-usb/dibusb-mb.c | 1 - drivers/media/dvb/dvb-usb/dibusb-mc.c | 1 - drivers/media/dvb/dvb-usb/digitv.c | 1 - drivers/media/dvb/dvb-usb/dtt200u.c | 1 - drivers/media/dvb/dvb-usb/nova-t-usb2.c | 1 - drivers/media/dvb/dvb-usb/umt-010.c | 1 - drivers/media/dvb/dvb-usb/vp702x.c | 1 - drivers/media/dvb/dvb-usb/vp7045.c | 1 - drivers/media/video/cpia_usb.c | 1 - drivers/media/video/em28xx/em28xx-video.c | 1 - drivers/net/irda/irda-usb.c | 1 - drivers/net/irda/stir4200.c | 1 - drivers/usb/atm/cxacru.c | 1 - drivers/usb/atm/speedtch.c | 1 - drivers/usb/atm/ueagle-atm.c | 1 - drivers/usb/atm/xusbatm.c | 1 - drivers/usb/class/audio.c | 1 - drivers/usb/class/cdc-acm.c | 1 - drivers/usb/class/usb-midi.c | 1 - drivers/usb/class/usblp.c | 1 - drivers/usb/core/devio.c | 1 - drivers/usb/core/hub.c | 1 - drivers/usb/image/mdc800.c | 1 - drivers/usb/image/microtek.c | 1 - drivers/usb/input/acecad.c | 1 - drivers/usb/input/aiptek.c | 1 - drivers/usb/input/appletouch.c | 1 - drivers/usb/input/ati_remote.c | 1 - drivers/usb/input/hid-core.c | 1 - drivers/usb/input/hiddev.c | 1 - drivers/usb/input/itmtouch.c | 1 - drivers/usb/input/kbtab.c | 1 - drivers/usb/input/keyspan_remote.c | 1 - drivers/usb/input/mtouchusb.c | 1 - drivers/usb/input/powermate.c | 1 - drivers/usb/input/touchkitusb.c | 1 - drivers/usb/input/usbkbd.c | 1 - drivers/usb/input/usbmouse.c | 1 - drivers/usb/input/wacom.c | 1 - drivers/usb/input/xpad.c | 1 - drivers/usb/input/yealink.c | 1 - drivers/usb/media/dabusb.c | 1 - drivers/usb/media/dsbr100.c | 1 - drivers/usb/media/ov511.c | 1 - drivers/usb/media/pwc/pwc-if.c | 1 - drivers/usb/media/se401.c | 1 - drivers/usb/media/sn9c102_core.c | 1 - drivers/usb/media/stv680.c | 1 - drivers/usb/media/vicam.c | 1 - drivers/usb/media/w9968cf.c | 1 - drivers/usb/misc/auerswald.c | 1 - drivers/usb/misc/cytherm.c | 1 - drivers/usb/misc/emi26.c | 1 - drivers/usb/misc/emi62.c | 1 - drivers/usb/misc/idmouse.c | 1 - drivers/usb/misc/ldusb.c | 1 - drivers/usb/misc/legousbtower.c | 1 - drivers/usb/misc/phidgetkit.c | 1 - drivers/usb/misc/phidgetservo.c | 1 - drivers/usb/misc/rio500.c | 1 - drivers/usb/misc/sisusbvga/sisusb.c | 1 - drivers/usb/misc/usblcd.c | 1 - drivers/usb/misc/usbled.c | 1 - drivers/usb/misc/usbtest.c | 1 - drivers/usb/misc/uss720.c | 1 - drivers/usb/net/asix.c | 1 - drivers/usb/net/catc.c | 1 - drivers/usb/net/cdc_ether.c | 1 - drivers/usb/net/cdc_subset.c | 1 - drivers/usb/net/gl620a.c | 1 - drivers/usb/net/kaweth.c | 1 - drivers/usb/net/net1080.c | 1 - drivers/usb/net/plusb.c | 1 - drivers/usb/net/rndis_host.c | 1 - drivers/usb/net/rtl8150.c | 1 - drivers/usb/net/zaurus.c | 1 - drivers/usb/net/zd1201.c | 1 - drivers/usb/serial/airprime.c | 1 - drivers/usb/serial/anydata.c | 1 - drivers/usb/serial/belkin_sa.c | 1 - drivers/usb/serial/cp2101.c | 1 - drivers/usb/serial/cyberjack.c | 1 - drivers/usb/serial/digi_acceleport.c | 1 - drivers/usb/serial/empeg.c | 1 - drivers/usb/serial/garmin_gps.c | 1 - drivers/usb/serial/generic.c | 1 - drivers/usb/serial/hp4x.c | 1 - drivers/usb/serial/io_edgeport.c | 1 - drivers/usb/serial/io_ti.c | 1 - drivers/usb/serial/ipaq.c | 1 - drivers/usb/serial/ipw.c | 1 - drivers/usb/serial/ir-usb.c | 1 - drivers/usb/serial/keyspan.h | 1 - drivers/usb/serial/keyspan_pda.c | 1 - drivers/usb/serial/kl5kusb105.c | 1 - drivers/usb/serial/kobil_sct.c | 1 - drivers/usb/serial/mct_u232.c | 1 - drivers/usb/serial/omninet.c | 1 - drivers/usb/serial/option.c | 1 - drivers/usb/serial/pl2303.c | 1 - drivers/usb/serial/safe_serial.c | 1 - drivers/usb/serial/ti_usb_3410_5052.c | 1 - drivers/usb/serial/usb-serial.c | 1 - drivers/usb/serial/visor.c | 1 - drivers/usb/serial/whiteheat.c | 1 - drivers/usb/storage/libusual.c | 1 - drivers/usb/storage/usb.c | 1 - drivers/usb/usb-skeleton.c | 1 - drivers/w1/dscore.c | 1 - include/linux/usb.h | 4 ---- sound/usb/usbaudio.c | 1 - sound/usb/usx2y/usbusx2y.c | 1 - 125 files changed, 128 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 06d741d58a6..c7a28f5be42 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -2460,7 +2460,6 @@ static void ub_disconnect(struct usb_interface *intf) } static struct usb_driver ub_driver = { - .owner = THIS_MODULE, .name = "ub", .probe = ub_probe, .disconnect = ub_disconnect, diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c index 8e7fb355177..3e7a067cc08 100644 --- a/drivers/bluetooth/bcm203x.c +++ b/drivers/bluetooth/bcm203x.c @@ -275,7 +275,6 @@ static void bcm203x_disconnect(struct usb_interface *intf) } static struct usb_driver bcm203x_driver = { - .owner = THIS_MODULE, .name = "bcm203x", .probe = bcm203x_probe, .disconnect = bcm203x_disconnect, diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c index 067e27893e4..8947c8837da 100644 --- a/drivers/bluetooth/bfusb.c +++ b/drivers/bluetooth/bfusb.c @@ -768,7 +768,6 @@ static void bfusb_disconnect(struct usb_interface *intf) } static struct usb_driver bfusb_driver = { - .owner = THIS_MODULE, .name = "bfusb", .probe = bfusb_probe, .disconnect = bfusb_disconnect, diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index 394796315ad..9446960ac74 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -619,7 +619,6 @@ static void bpa10x_disconnect(struct usb_interface *intf) } static struct usb_driver bpa10x_driver = { - .owner = THIS_MODULE, .name = "bpa10x", .probe = bpa10x_probe, .disconnect = bpa10x_disconnect, diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 057cb2b6e6d..92382e82328 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -1044,7 +1044,6 @@ static void hci_usb_disconnect(struct usb_interface *intf) } static struct usb_driver hci_usb_driver = { - .owner = THIS_MODULE, .name = "hci_usb", .probe = hci_usb_probe, .disconnect = hci_usb_disconnect, diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index 092e9b13375..1533f56baa4 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -151,7 +151,6 @@ static void usb_pcwd_disconnect (struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver usb_pcwd_driver = { - .owner = THIS_MODULE, .name = DRIVER_NAME, .probe = usb_pcwd_probe, .disconnect = usb_pcwd_disconnect, diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 64b4a308098..bc2fce60f9f 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -235,7 +235,6 @@ static struct usb_device_id iforce_usb_ids [] = { MODULE_DEVICE_TABLE (usb, iforce_usb_ids); struct usb_driver iforce_usb_driver = { - .owner = THIS_MODULE, .name = "iforce", .probe = iforce_usb_probe, .disconnect = iforce_usb_disconnect, diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index f8457ef4882..ca5b4a3b683 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -1715,7 +1715,6 @@ hfc_usb_disconnect(struct usb_interface /* our driver information structure */ /************************************/ static struct usb_driver hfc_drv = { - .owner = THIS_MODULE, .name = "hfc_usb", .id_table = hfcusb_idtab, .probe = hfc_usb_probe, diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c index 8e192a3a349..99cb0f3d59a 100644 --- a/drivers/isdn/hisax/st5481_init.c +++ b/drivers/isdn/hisax/st5481_init.c @@ -180,7 +180,6 @@ static struct usb_device_id st5481_ids[] = { MODULE_DEVICE_TABLE (usb, st5481_ids); static struct usb_driver st5481_usb_driver = { - .owner = THIS_MODULE, .name = "st5481_usb", .probe = probe_st5481, .disconnect = disconnect_st5481, diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 0a78ba3737a..a6c91db40ad 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -544,7 +544,6 @@ static struct usb_device_id flexcop_usb_table [] = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver flexcop_usb_driver = { - .owner = THIS_MODULE, .name = "b2c2_flexcop_usb", .probe = flexcop_usb_probe, .disconnect = flexcop_usb_disconnect, diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 336fc284fa5..b996fb59b7e 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -986,7 +986,6 @@ static const struct usb_device_id cinergyt2_table [] __devinitdata = { MODULE_DEVICE_TABLE(usb, cinergyt2_table); static struct usb_driver cinergyt2_driver = { - .owner = THIS_MODULE, .name = "cinergyT2", .probe = cinergyt2_probe, .disconnect = cinergyt2_disconnect, diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index 8c7beffb045..ce44aa6bbb8 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -144,7 +144,6 @@ static struct dvb_usb_properties a800_properties = { }; static struct usb_driver a800_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_a800", .probe = a800_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 3fe383f4bb4..d05fab01ccc 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -241,7 +241,6 @@ static struct dvb_usb_properties cxusb_properties = { }; static struct usb_driver cxusb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_cxusb", .probe = cxusb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index aa271a2496d..52ac3e5adf5 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -373,7 +373,6 @@ static struct dvb_usb_properties artec_t1_usb2_properties = { }; static struct usb_driver dibusb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dibusb_mb", .probe = dibusb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c index 6a0912eab39..55802fba3c2 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -82,7 +82,6 @@ static struct dvb_usb_properties dibusb_mc_properties = { }; static struct usb_driver dibusb_mc_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dibusb_mc", .probe = dibusb_mc_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c index f98e306a575..450417a9e64 100644 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -233,7 +233,6 @@ static struct dvb_usb_properties digitv_properties = { }; static struct usb_driver digitv_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_digitv", .probe = digitv_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c index b595476332c..6e2bac87344 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -198,7 +198,6 @@ static struct dvb_usb_properties wt220u_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver dtt200u_usb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_dtt200u", .probe = dtt200u_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c index 1841a66427b..fac48fc7a4a 100644 --- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -202,7 +202,6 @@ static struct dvb_usb_properties nova_t_properties = { }; static struct usb_driver nova_t_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_nova_t_usb2", .probe = nova_t_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index 6fd67657c26..14f1911c79b 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -128,7 +128,6 @@ static struct dvb_usb_properties umt_properties = { }; static struct usb_driver umt_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_umt_010", .probe = umt_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c index de13c04e8e6..afa00fdb5ec 100644 --- a/drivers/media/dvb/dvb-usb/vp702x.c +++ b/drivers/media/dvb/dvb-usb/vp702x.c @@ -256,7 +256,6 @@ static struct dvb_usb_properties vp702x_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver vp702x_usb_driver = { - .owner = THIS_MODULE, .name = "dvb-usb-vp702x", .probe = vp702x_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c index 75765e3a569..3835235b68d 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -253,7 +253,6 @@ static struct dvb_usb_properties vp7045_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver vp7045_usb_driver = { - .owner = THIS_MODULE, .name = "dvb_usb_vp7045", .probe = vp7045_usb_probe, .disconnect = dvb_usb_device_exit, diff --git a/drivers/media/video/cpia_usb.c b/drivers/media/video/cpia_usb.c index 9774e94d1e7..1439cb75287 100644 --- a/drivers/media/video/cpia_usb.c +++ b/drivers/media/video/cpia_usb.c @@ -582,7 +582,6 @@ MODULE_LICENSE("GPL"); static struct usb_driver cpia_driver = { - .owner = THIS_MODULE, .name = "cpia", .probe = cpia_probe, .disconnect = cpia_disconnect, diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 06d76879bde..3a56120397a 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1884,7 +1884,6 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) } static struct usb_driver em28xx_usb_driver = { - .owner = THIS_MODULE, .name = "em28xx", .probe = em28xx_usb_probe, .disconnect = em28xx_usb_disconnect, diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index c22c0517883..fa176ffb4ad 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1539,7 +1539,6 @@ static void irda_usb_disconnect(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "irda-usb", .probe = irda_usb_probe, .disconnect = irda_usb_disconnect, diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 3961a754e92..31867e4b891 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -1152,7 +1152,6 @@ static int stir_resume(struct usb_interface *intf) * USB device callbacks */ static struct usb_driver irda_driver = { - .owner = THIS_MODULE, .name = "stir4200", .probe = stir_probe, .disconnect = stir_disconnect, diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 9d59dc62e6d..af0a41e7870 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -853,7 +853,6 @@ static int cxacru_usb_probe(struct usb_interface *intf, const struct usb_device_ } static struct usb_driver cxacru_usb_driver = { - .owner = THIS_MODULE, .name = cxacru_driver_name, .probe = cxacru_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index d0cbbb7f038..b2833614865 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -659,7 +659,6 @@ MODULE_DEVICE_TABLE(usb, speedtch_usb_ids); static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *); static struct usb_driver speedtch_usb_driver = { - .owner = THIS_MODULE, .name = speedtch_driver_name, .probe = speedtch_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index be08e16df09..7d2a679989e 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1776,7 +1776,6 @@ static const struct usb_device_id uea_ids[] = { * USB driver descriptor */ static struct usb_driver uea_driver = { - .owner = THIS_MODULE, .name = "ueagle-atm", .id_table = uea_ids, .probe = uea_probe, diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index 7fe7fb484d1..5c76e3aaaa5 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -140,7 +140,6 @@ static int xusbatm_usb_probe(struct usb_interface *intf, } static struct usb_driver xusbatm_usb_driver = { - .owner = THIS_MODULE, .name = xusbatm_driver_name, .probe = xusbatm_usb_probe, .disconnect = usbatm_usb_disconnect, diff --git a/drivers/usb/class/audio.c b/drivers/usb/class/audio.c index 50858273f8d..3ad9ee8b84a 100644 --- a/drivers/usb/class/audio.c +++ b/drivers/usb/class/audio.c @@ -2732,7 +2732,6 @@ static struct usb_device_id usb_audio_ids [] = { MODULE_DEVICE_TABLE (usb, usb_audio_ids); static struct usb_driver usb_audio_driver = { - .owner = THIS_MODULE, .name = "audio", .probe = usb_audio_probe, .disconnect = usb_audio_disconnect, diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 72936dc15ec..93de121f52a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1088,7 +1088,6 @@ static struct usb_device_id acm_ids[] = { MODULE_DEVICE_TABLE (usb, acm_ids); static struct usb_driver acm_driver = { - .owner = THIS_MODULE, .name = "cdc_acm", .probe = acm_probe, .disconnect = acm_disconnect, diff --git a/drivers/usb/class/usb-midi.c b/drivers/usb/class/usb-midi.c index 5f8af35e763..f13f004d311 100644 --- a/drivers/usb/class/usb-midi.c +++ b/drivers/usb/class/usb-midi.c @@ -2027,7 +2027,6 @@ static struct usb_device_id id_table[] = { }; static struct usb_driver usb_midi_driver = { - .owner = THIS_MODULE, .name = "midi", .probe = usb_midi_probe, .disconnect = usb_midi_disconnect, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 357e75335f1..10406b857ac 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -1186,7 +1186,6 @@ static struct usb_device_id usblp_ids [] = { MODULE_DEVICE_TABLE (usb, usblp_ids); static struct usb_driver usblp_driver = { - .owner = THIS_MODULE, .name = "usblp", .probe = usblp_probe, .disconnect = usblp_disconnect, diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b1d6e9af732..3a73170e95d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -402,7 +402,6 @@ static void driver_disconnect(struct usb_interface *intf) } struct usb_driver usbfs_driver = { - .owner = THIS_MODULE, .name = "usbfs", .probe = driver_probe, .disconnect = driver_disconnect, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5faf7edd73c..40c6c50c6bd 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2865,7 +2865,6 @@ static struct usb_device_id hub_id_table [] = { MODULE_DEVICE_TABLE (usb, hub_id_table); static struct usb_driver hub_driver = { - .owner = THIS_MODULE, .name = "hub", .probe = hub_probe, .disconnect = hub_disconnect, diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 1d973bcf56a..049871145d6 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -962,7 +962,6 @@ MODULE_DEVICE_TABLE (usb, mdc800_table); */ static struct usb_driver mdc800_usb_driver = { - .owner = THIS_MODULE, .name = "mdc800", .probe = mdc800_usb_probe, .disconnect = mdc800_usb_disconnect, diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 950543aa5ac..458f2acdeb0 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -160,7 +160,6 @@ static void mts_usb_disconnect(struct usb_interface *intf); static struct usb_device_id mts_usb_ids []; static struct usb_driver mts_usb_driver = { - .owner = THIS_MODULE, .name = "microtekX6", .probe = mts_usb_probe, .disconnect = mts_usb_disconnect, diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index a32558b4048..df29b8078b5 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -261,7 +261,6 @@ static struct usb_device_id usb_acecad_id_table [] = { MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); static struct usb_driver usb_acecad_driver = { - .owner = THIS_MODULE, .name = "usb_acecad", .probe = usb_acecad_probe, .disconnect = usb_acecad_disconnect, diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 0e2505c073d..356284c746a 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2190,7 +2190,6 @@ fail1: input_free_device(inputdev); static void aiptek_disconnect(struct usb_interface *intf); static struct usb_driver aiptek_driver = { - .owner = THIS_MODULE, .name = "aiptek", .probe = aiptek_probe, .disconnect = aiptek_disconnect, diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 15840db092a..1949b54f41f 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -452,7 +452,6 @@ static int atp_resume(struct usb_interface *iface) } static struct usb_driver atp_driver = { - .owner = THIS_MODULE, .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 9a2a47db949..8948e5c3941 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -295,7 +295,6 @@ static void ati_remote_disconnect (struct usb_interface *interface); /* usb specific object to register with the usb subsystem */ static struct usb_driver ati_remote_driver = { - .owner = THIS_MODULE, .name = "ati_remote", .probe = ati_remote_probe, .disconnect = ati_remote_disconnect, diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index a3e44ef1df4..256d7325d4a 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1930,7 +1930,6 @@ static struct usb_device_id hid_usb_ids [] = { MODULE_DEVICE_TABLE (usb, hid_usb_ids); static struct usb_driver hid_driver = { - .owner = THIS_MODULE, .name = "usbhid", .probe = hid_probe, .disconnect = hid_disconnect, diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index 440377c7a0d..4dff8473553 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -826,7 +826,6 @@ static int hiddev_usbd_probe(struct usb_interface *intf, static /* const */ struct usb_driver hiddev_driver = { - .owner = THIS_MODULE, .name = "hiddev", .probe = hiddev_usbd_probe, }; diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 4a50acb39d2..7618ae5c104 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -250,7 +250,6 @@ static void itmtouch_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, itmtouch_ids); static struct usb_driver itmtouch_driver = { - .owner = THIS_MODULE, .name = "itmtouch", .probe = itmtouch_probe, .disconnect = itmtouch_disconnect, diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index fd48e74e78e..f6d5cead542 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -197,7 +197,6 @@ static void kbtab_disconnect(struct usb_interface *intf) } static struct usb_driver kbtab_driver = { - .owner = THIS_MODULE, .name = "kbtab", .probe = kbtab_probe, .disconnect = kbtab_disconnect, diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index a32cfe51b77..5ae5201dbf5 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -559,7 +559,6 @@ static void keyspan_disconnect(struct usb_interface *interface) */ static struct usb_driver keyspan_driver = { - .owner = THIS_MODULE, .name = "keyspan_remote", .probe = keyspan_probe, .disconnect = keyspan_disconnect, diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 52cc18cd247..f018953a548 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -310,7 +310,6 @@ static void mtouchusb_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, mtouchusb_devices); static struct usb_driver mtouchusb_driver = { - .owner = THIS_MODULE, .name = "mtouchusb", .probe = mtouchusb_probe, .disconnect = mtouchusb_disconnect, diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index b7476233ef5..fdf0f788062 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -441,7 +441,6 @@ static struct usb_device_id powermate_devices [] = { MODULE_DEVICE_TABLE (usb, powermate_devices); static struct usb_driver powermate_driver = { - .owner = THIS_MODULE, .name = "powermate", .probe = powermate_probe, .disconnect = powermate_disconnect, diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 7420c6b8428..75e7c12e718 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -267,7 +267,6 @@ static void touchkit_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, touchkit_devices); static struct usb_driver touchkit_driver = { - .owner = THIS_MODULE, .name = "touchkitusb", .probe = touchkit_probe, .disconnect = touchkit_disconnect, diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 226b6f90a90..2f3edc26cb5 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -345,7 +345,6 @@ static struct usb_device_id usb_kbd_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_kbd_id_table); static struct usb_driver usb_kbd_driver = { - .owner = THIS_MODULE, .name = "usbkbd", .probe = usb_kbd_probe, .disconnect = usb_kbd_disconnect, diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 230f6b1b314..af526135d21 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -226,7 +226,6 @@ static struct usb_device_id usb_mouse_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_mouse_id_table); static struct usb_driver usb_mouse_driver = { - .owner = THIS_MODULE, .name = "usbmouse", .probe = usb_mouse_probe, .disconnect = usb_mouse_disconnect, diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index dc099bbe12b..48df4cfd5a4 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -945,7 +945,6 @@ static void wacom_disconnect(struct usb_interface *intf) } static struct usb_driver wacom_driver = { - .owner = THIS_MODULE, .name = "wacom", .probe = wacom_probe, .disconnect = wacom_disconnect, diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 43112f040b6..e421328615f 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -316,7 +316,6 @@ static void xpad_disconnect(struct usb_interface *intf) } static struct usb_driver xpad_driver = { - .owner = THIS_MODULE, .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index f526aebea50..1bfc105ad4d 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -987,7 +987,6 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) } static struct usb_driver yealink_driver = { - .owner = THIS_MODULE, .name = "yealink", .probe = usb_probe, .disconnect = usb_disconnect, diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c index 27b23c55bbc..18d8eaf408d 100644 --- a/drivers/usb/media/dabusb.c +++ b/drivers/usb/media/dabusb.c @@ -812,7 +812,6 @@ static struct usb_device_id dabusb_ids [] = { MODULE_DEVICE_TABLE (usb, dabusb_ids); static struct usb_driver dabusb_driver = { - .owner = THIS_MODULE, .name = "dabusb", .probe = dabusb_probe, .disconnect = dabusb_disconnect, diff --git a/drivers/usb/media/dsbr100.c b/drivers/usb/media/dsbr100.c index 7503f5b96f5..6a5700e9d42 100644 --- a/drivers/usb/media/dsbr100.c +++ b/drivers/usb/media/dsbr100.c @@ -150,7 +150,6 @@ MODULE_DEVICE_TABLE (usb, usb_dsbr100_device_table); /* USB subsystem interface */ static struct usb_driver usb_dsbr100_driver = { - .owner = THIS_MODULE, .name = "dsbr100", .probe = usb_dsbr100_probe, .disconnect = usb_dsbr100_disconnect, diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c index 036c485d1d1..8df4f9de5ee 100644 --- a/drivers/usb/media/ov511.c +++ b/drivers/usb/media/ov511.c @@ -6008,7 +6008,6 @@ ov51x_disconnect(struct usb_interface *intf) } static struct usb_driver ov511_driver = { - .owner = THIS_MODULE, .name = "ov511", .id_table = device_table, .probe = ov51x_probe, diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index 5524fd70210..09ca6128ac2 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -111,7 +111,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id static void usb_pwc_disconnect(struct usb_interface *intf); static struct usb_driver pwc_driver = { - .owner = THIS_MODULE, .name = "Philips webcam", /* name */ .id_table = pwc_device_table, .probe = usb_pwc_probe, /* probe() */ diff --git a/drivers/usb/media/se401.c b/drivers/usb/media/se401.c index f69e443cd1b..b2ae29af594 100644 --- a/drivers/usb/media/se401.c +++ b/drivers/usb/media/se401.c @@ -1401,7 +1401,6 @@ static void se401_disconnect(struct usb_interface *intf) } static struct usb_driver se401_driver = { - .owner = THIS_MODULE, .name = "se401", .id_table = device_table, .probe = se401_probe, diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index b2e66e3b90a..08723459da8 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -2711,7 +2711,6 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf) static struct usb_driver sn9c102_usb_driver = { - .owner = THIS_MODULE, .name = "sn9c102", .id_table = sn9c102_id_table, .probe = sn9c102_usb_probe, diff --git a/drivers/usb/media/stv680.c b/drivers/usb/media/stv680.c index 0fd0fa9fec2..774038b352c 100644 --- a/drivers/usb/media/stv680.c +++ b/drivers/usb/media/stv680.c @@ -1477,7 +1477,6 @@ static void stv680_disconnect (struct usb_interface *intf) } static struct usb_driver stv680_driver = { - .owner = THIS_MODULE, .name = "stv680", .probe = stv680_probe, .disconnect = stv680_disconnect, diff --git a/drivers/usb/media/vicam.c b/drivers/usb/media/vicam.c index 0bc0b1247a6..1c73155c8d7 100644 --- a/drivers/usb/media/vicam.c +++ b/drivers/usb/media/vicam.c @@ -1257,7 +1257,6 @@ static struct usb_device_id vicam_table[] = { MODULE_DEVICE_TABLE(usb, vicam_table); static struct usb_driver vicam_driver = { - .owner = THIS_MODULE, .name = "vicam", .probe = vicam_probe, .disconnect = vicam_disconnect, diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 67612c81cb9..52b90d50feb 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -3668,7 +3668,6 @@ static void w9968cf_usb_disconnect(struct usb_interface* intf) static struct usb_driver w9968cf_usb_driver = { - .owner = THIS_MODULE, .name = "w9968cf", .id_table = winbond_id_table, .probe = w9968cf_usb_probe, diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index b293db3c28c..fad387f2189 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -2103,7 +2103,6 @@ MODULE_DEVICE_TABLE (usb, auerswald_ids); /* Standard usb driver struct */ static struct usb_driver auerswald_driver = { - .owner = THIS_MODULE, .name = "auerswald", .probe = auerswald_probe, .disconnect = auerswald_disconnect, diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index b33044d56a1..6671317b495 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -50,7 +50,6 @@ static void cytherm_disconnect(struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver cytherm_driver = { - .owner = THIS_MODULE, .name = "cytherm", .probe = cytherm_probe, .disconnect = cytherm_disconnect, diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index c8155209bf4..3824df33094 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -227,7 +227,6 @@ static void emi26_disconnect(struct usb_interface *intf) } static struct usb_driver emi26_driver = { - .owner = THIS_MODULE, .name = "emi26 - firmware loader", .probe = emi26_probe, .disconnect = emi26_disconnect, diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 189986af2ac..52fea2e08db 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -266,7 +266,6 @@ static void emi62_disconnect(struct usb_interface *intf) } static struct usb_driver emi62_driver = { - .owner = THIS_MODULE, .name = "emi62 - firmware loader", .probe = emi62_probe, .disconnect = emi62_disconnect, diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 1dc3e0f7301..d8cde101798 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -114,7 +114,6 @@ static struct usb_class_driver idmouse_class = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver idmouse_driver = { - .owner = THIS_MODULE, .name = DRIVER_SHORT, .probe = idmouse_probe, .disconnect = idmouse_disconnect, diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 7e93ac96490..981d8a5fbfd 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -763,7 +763,6 @@ static void ld_usb_disconnect(struct usb_interface *intf) /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver ld_usb_driver = { - .owner = THIS_MODULE, .name = "ldusb", .probe = ld_usb_probe, .disconnect = ld_usb_disconnect, diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 2703e205bc8..1336745b8f5 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -282,7 +282,6 @@ static struct usb_class_driver tower_class = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver tower_driver = { - .owner = THIS_MODULE, .name = "legousbtower", .probe = tower_probe, .disconnect = tower_disconnect, diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c index 067a8148692..605a3c87e05 100644 --- a/drivers/usb/misc/phidgetkit.c +++ b/drivers/usb/misc/phidgetkit.c @@ -555,7 +555,6 @@ static void interfacekit_disconnect(struct usb_interface *interface) } static struct usb_driver interfacekit_driver = { - .owner = THIS_MODULE, .name = "phidgetkit", .probe = interfacekit_probe, .disconnect = interfacekit_disconnect, diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index a30d4a6ee82..b3418d2bcc6 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -306,7 +306,6 @@ servo_disconnect(struct usb_interface *interface) } static struct usb_driver servo_driver = { - .owner = THIS_MODULE, .name = "phidgetservo", .probe = servo_probe, .disconnect = servo_disconnect, diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 9590dbac5d9..b9d66074b80 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -522,7 +522,6 @@ static struct usb_device_id rio_table [] = { MODULE_DEVICE_TABLE (usb, rio_table); static struct usb_driver rio_driver = { - .owner = THIS_MODULE, .name = "rio500", .probe = probe_rio, .disconnect = disconnect_rio, diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 41ef2b60675..44350d49ad0 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3489,7 +3489,6 @@ static struct usb_device_id sisusb_table [] = { MODULE_DEVICE_TABLE (usb, sisusb_table); static struct usb_driver sisusb_driver = { - .owner = THIS_MODULE, .name = "sisusb", .probe = sisusb_probe, .disconnect = sisusb_disconnect, diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 85f3725334b..cc3dae3f34e 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -371,7 +371,6 @@ static void lcd_disconnect(struct usb_interface *interface) } static struct usb_driver lcd_driver = { - .owner = THIS_MODULE, .name = "usblcd", .probe = lcd_probe, .disconnect = lcd_disconnect, diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 3c93921cb6b..877b081a3a6 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -148,7 +148,6 @@ static void led_disconnect(struct usb_interface *interface) } static struct usb_driver led_driver = { - .owner = THIS_MODULE, .name = "usbled", .probe = led_probe, .disconnect = led_disconnect, diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 605a2afe34e..84fa1728f05 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2134,7 +2134,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver usbtest_driver = { - .owner = THIS_MODULE, .name = "usbtest", .id_table = id_table, .probe = usbtest_probe, diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 1cabe7ed91f..4081990b7d1 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -780,7 +780,6 @@ MODULE_DEVICE_TABLE (usb, uss720_table); static struct usb_driver uss720_driver = { - .owner = THIS_MODULE, .name = "uss720", .probe = uss720_probe, .disconnect = uss720_disconnect, diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 542120ef1fd..2faf2f2bdcd 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -918,7 +918,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver asix_driver = { - .owner = THIS_MODULE, .name = "asix", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c index 37ef365a247..be5f5e142dd 100644 --- a/drivers/usb/net/catc.c +++ b/drivers/usb/net/catc.c @@ -934,7 +934,6 @@ static struct usb_device_id catc_id_table [] = { MODULE_DEVICE_TABLE(usb, catc_id_table); static struct usb_driver catc_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = catc_probe, .disconnect = catc_disconnect, diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index c008c981862..63f1f3ba8e0 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -476,7 +476,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver cdc_driver = { - .owner = THIS_MODULE, .name = "cdc_ether", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index f05cfb83c82..ec801e8bb1b 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -306,7 +306,6 @@ MODULE_DEVICE_TABLE(usb, products); /*-------------------------------------------------------------------------*/ static struct usb_driver cdc_subset_driver = { - .owner = THIS_MODULE, .name = "cdc_subset", .probe = usbnet_probe, .suspend = usbnet_suspend, diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index 2455e9a8567..faf1e86be68 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -377,7 +377,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver gl620a_driver = { - .owner = THIS_MODULE, .name = "gl620a", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index b5776518020..def3bb8e229 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -175,7 +175,6 @@ MODULE_DEVICE_TABLE (usb, usb_klsi_table); * kaweth_driver ****************************************************************/ static struct usb_driver kaweth_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = kaweth_probe, .disconnect = kaweth_disconnect, diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index b3799b1a2b0..78e6a43b108 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -593,7 +593,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver net1080_driver = { - .owner = THIS_MODULE, .name = "net1080", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c index 89856aa0e3b..4fe863389cb 100644 --- a/drivers/usb/net/plusb.c +++ b/drivers/usb/net/plusb.c @@ -127,7 +127,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver plusb_driver = { - .owner = THIS_MODULE, .name = "plusb", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index c0ecbab6f6b..49991ac1bf3 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -586,7 +586,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver rndis_driver = { - .owner = THIS_MODULE, .name = "rndis_host", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index 787dd3591d6..8ca52be2397 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -177,7 +177,6 @@ static int rtl8150_probe(struct usb_interface *intf, static const char driver_name [] = "rtl8150"; static struct usb_driver rtl8150_driver = { - .owner = THIS_MODULE, .name = driver_name, .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 680d13957af..9c5ab251370 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -357,7 +357,6 @@ static const struct usb_device_id products [] = { MODULE_DEVICE_TABLE(usb, products); static struct usb_driver zaurus_driver = { - .owner = THIS_MODULE, .name = "zaurus", .id_table = products, .probe = usbnet_probe, diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 2f52261c7cc..4d6673adc8f 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1923,7 +1923,6 @@ static int zd1201_resume(struct usb_interface *interface) #endif static struct usb_driver zd1201_usb = { - .owner = THIS_MODULE, .name = "zd1201", .probe = zd1201_probe, .disconnect = zd1201_disconnect, diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index 2ef9945a6c0..dbf1f063098 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -23,7 +23,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver airprime_driver = { - .owner = THIS_MODULE, .name = "airprime", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c index 7a171e034b5..343f6f22822 100644 --- a/drivers/usb/serial/anydata.c +++ b/drivers/usb/serial/anydata.c @@ -27,7 +27,6 @@ static int buffer_size; static int debug; static struct usb_driver anydata_driver = { - .owner = THIS_MODULE, .name = "anydata", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 69039bd9fc5..4144777ea18 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -113,7 +113,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver belkin_driver = { - .owner = THIS_MODULE, .name = "belkin", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 813bab37e07..da46b351e18 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,7 +67,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cp2101_driver = { - .owner = THIS_MODULE, .name = "cp2101", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 8c10e400490..6d18d4eaba3 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -76,7 +76,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver cyberjack_driver = { - .owner = THIS_MODULE, .name = "cyberjack", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index c50cec95f49..8fc414bd5b2 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -493,7 +493,6 @@ static struct usb_device_id id_table_4 [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver digi_driver = { - .owner = THIS_MODULE, .name = "digi_acceleport", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index e5e40064caf..79a766e9ca2 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -105,7 +105,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver empeg_driver = { - .owner = THIS_MODULE, .name = "empeg", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 198a322286f..452efce7271 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -222,7 +222,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver garmin_driver = { - .owner = THIS_MODULE, .name = "garmin_gps", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index c00a440dc42..4ddac620fc0 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -68,7 +68,6 @@ static int generic_probe(struct usb_interface *interface, } static struct usb_driver generic_driver = { - .owner = THIS_MODULE, .name = "usbserial_generic", .probe = generic_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c index e588c3fe632..e9719da2aca 100644 --- a/drivers/usb/serial/hp4x.c +++ b/drivers/usb/serial/hp4x.c @@ -37,7 +37,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); static struct usb_driver hp49gp_driver = { - .owner = THIS_MODULE, .name = "hp4X", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 276bd425a47..4e2b599d85a 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -242,7 +242,6 @@ static void edge_shutdown (struct usb_serial *serial); #include "io_tables.h" /* all of the devices that this driver supports */ static struct usb_driver io_driver = { - .owner = THIS_MODULE, .name = "io_edgeport", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 8b2e4c78abc..22ad1a5a8f9 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -216,7 +216,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver io_driver = { - .owner = THIS_MODULE, .name = "io_ti", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index efb568be701..06d07cea0b7 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -542,7 +542,6 @@ static struct usb_device_id ipaq_id_table [] = { MODULE_DEVICE_TABLE (usb, ipaq_id_table); static struct usb_driver ipaq_driver = { - .owner = THIS_MODULE, .name = "ipaq", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index 64e2cda2a84..2dd191f5fe7 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -152,7 +152,6 @@ static struct usb_device_id usb_ipw_ids[] = { MODULE_DEVICE_TABLE(usb, usb_ipw_ids); static struct usb_driver usb_ipw_driver = { - .owner = THIS_MODULE, .name = "ipwtty", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 647431c1ccb..a5901042144 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -125,7 +125,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver ir_driver = { - .owner = THIS_MODULE, .name = "ir-usb", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 4e6f626f606..7472ed6bf62 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -520,7 +520,6 @@ static struct usb_device_id keyspan_ids_combined[] = { MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); static struct usb_driver keyspan_driver = { - .owner = THIS_MODULE, .name = "keyspan", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 0d1f1526854..b0441c35f98 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -150,7 +150,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver keyspan_pda_driver = { - .owner = THIS_MODULE, .name = "keyspan_pda", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index bd68638b7c3..4e2f7dfb58b 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -116,7 +116,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver kl5kusb105d_driver = { - .owner = THIS_MODULE, .name = "kl5kusb105d", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 4c853afea38..d9c21e27513 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -97,7 +97,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver kobil_driver = { - .owner = THIS_MODULE, .name = "kobil", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index b0415e7542c..b6d6cab9c85 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -125,7 +125,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver mct_u232_driver = { - .owner = THIS_MODULE, .name = "mct_u232", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index b595befb24c..762d8ff9a1e 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -80,7 +80,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver omninet_driver = { - .owner = THIS_MODULE, .name = "omninet", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4ee657eaaa0..3fd2405304f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -95,7 +95,6 @@ static struct usb_device_id option_ids[] = { MODULE_DEVICE_TABLE(usb, option_ids); static struct usb_driver option_driver = { - .owner = THIS_MODULE, .name = "option", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index e302a320444..c96ba9fc19e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -82,7 +82,6 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver pl2303_driver = { - .owner = THIS_MODULE, .name = "pl2303", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index f8241c15204..3ea284ce7b8 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -160,7 +160,6 @@ static struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE (usb, id_table); static struct usb_driver safe_driver = { - .owner = THIS_MODULE, .name = "safe_serial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 17a1f09483b..9e53ec75bcf 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -248,7 +248,6 @@ static struct usb_device_id ti_id_table_combined[] = { }; static struct usb_driver ti_usb_driver = { - .owner = THIS_MODULE, .name = "ti_usb_3410_5052", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2ac37b52485..12aaf18ff9e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -42,7 +42,6 @@ /* Driver structure we register with the USB core */ static struct usb_driver usb_serial_driver = { - .owner = THIS_MODULE, .name = "usbserial", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 2973f5564c0..49b1fbe61f2 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -173,7 +173,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver visor_driver = { - .owner = THIS_MODULE, .name = "visor", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 19c6386bb69..a7c3c4734d8 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -127,7 +127,6 @@ static struct usb_device_id id_table_combined [] = { MODULE_DEVICE_TABLE (usb, id_table_combined); static struct usb_driver whiteheat_driver = { - .owner = THIS_MODULE, .name = "whiteheat", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index 2680c69a241..b28151d1b60 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -153,7 +153,6 @@ static void usu_disconnect(struct usb_interface *intf) } static struct usb_driver usu_driver = { - .owner = THIS_MODULE, .name = "libusual", .probe = usu_probe, .disconnect = usu_disconnect, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c8375aa6272..484ed297bed 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -1000,7 +1000,6 @@ static void storage_disconnect(struct usb_interface *intf) ***********************************************************************/ static struct usb_driver usb_storage_driver = { - .owner = THIS_MODULE, .name = "usb-storage", .probe = storage_probe, .disconnect = storage_disconnect, diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 6c3a53f8f26..60c458ebaa2 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -330,7 +330,6 @@ static void skel_disconnect(struct usb_interface *interface) } static struct usb_driver skel_driver = { - .owner = THIS_MODULE, .name = "skeleton", .probe = skel_probe, .disconnect = skel_disconnect, diff --git a/drivers/w1/dscore.c b/drivers/w1/dscore.c index 15fb250451e..b9146306df4 100644 --- a/drivers/w1/dscore.c +++ b/drivers/w1/dscore.c @@ -52,7 +52,6 @@ static int ds_send_control_cmd(struct ds_device *, u16, u16); static struct usb_driver ds_driver = { - .owner = THIS_MODULE, .name = "DS9490R", .probe = ds_probe, .disconnect = ds_disconnect, diff --git a/include/linux/usb.h b/include/linux/usb.h index 3d05c63451a..2714814ab66 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -536,8 +536,6 @@ struct usb_dynids { /** * struct usb_driver - identifies USB driver to usbcore - * @owner: Pointer to the module owner of this driver; initialize - * it using THIS_MODULE. * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. * @probe: Called to see if the driver is willing to manage a particular @@ -580,8 +578,6 @@ struct usb_dynids { * them as necessary, and blocking until the unlinks complete). */ struct usb_driver { - struct module *owner; - const char *name; int (*probe) (struct usb_interface *intf, diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 99dae024b64..22f8bb612bf 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -1996,7 +1996,6 @@ static struct usb_device_id usb_audio_ids [] = { MODULE_DEVICE_TABLE (usb, usb_audio_ids); static struct usb_driver usb_audio_driver = { - .owner = THIS_MODULE, .name = "snd-usb-audio", .probe = usb_audio_probe, .disconnect = usb_audio_disconnect, diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c index cf77313c609..a3967f72ab4 100644 --- a/sound/usb/usx2y/usbusx2y.c +++ b/sound/usb/usx2y/usbusx2y.c @@ -409,7 +409,6 @@ static void snd_usX2Y_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, snd_usX2Y_usb_id_table); static struct usb_driver snd_usX2Y_usb_driver = { - .owner = THIS_MODULE, .name = "snd-usb-usx2y", .probe = snd_usX2Y_probe, .disconnect = snd_usX2Y_disconnect, -- cgit v1.2.3-70-g09d2 From 9ad3d6ccf5eee285e233dbaf186369b8d477a666 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2005 17:10:32 -0500 Subject: [PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 4 +- drivers/usb/core/devio.c | 2 - drivers/usb/core/driver.c | 4 -- drivers/usb/core/hcd.c | 5 +- drivers/usb/core/hub.c | 48 +++++++------------ drivers/usb/core/usb.c | 114 ++++---------------------------------------- drivers/usb/core/usb.h | 3 -- drivers/usb/host/ohci-hub.c | 2 +- include/linux/usb.h | 9 ++-- 9 files changed, 37 insertions(+), 154 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 83e815d3cd5..55bc563a325 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -545,10 +545,10 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, loff_t *ski struct usb_device *childdev = usbdev->children[chix]; if (childdev) { - down(&childdev->serialize); + usb_lock_device(childdev); ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, childdev, bus, level + 1, chix, ++cnt); - up(&childdev->serialize); + usb_unlock_device(childdev); if (ret == -EFAULT) return total_written; total_written += ret; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3a73170e95d..2b68998fe4b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1349,9 +1349,7 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) /* let kernel drivers try to (re)bind to the interface */ case USBDEVFS_CONNECT: usb_unlock_device(ps->dev); - usb_lock_all_devices(); bus_rescan_devices(intf->dev.bus); - usb_unlock_all_devices(); usb_lock_device(ps->dev); break; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index bb139f06bcd..076462c8ba2 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -432,9 +432,7 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner) spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); - usb_lock_all_devices(); retval = driver_register(&new_driver->driver); - usb_unlock_all_devices(); if (!retval) { pr_info("%s: registered new driver %s\n", @@ -465,11 +463,9 @@ void usb_deregister(struct usb_driver *driver) { pr_info("%s: deregistering driver %s\n", usbcore_name, driver->name); - usb_lock_all_devices(); usb_remove_newid_file(driver); usb_free_dynids(driver); driver_unregister(&driver->driver); - usb_unlock_all_devices(); usbfs_update_special(); } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index da24c31ee00..d16a0e8a7d7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -857,9 +857,7 @@ static int register_root_hub (struct usb_device *usb_dev, return (retval < 0) ? retval : -EMSGSIZE; } - usb_lock_device (usb_dev); retval = usb_new_device (usb_dev); - usb_unlock_device (usb_dev); if (retval) { usb_dev->bus->root_hub = NULL; dev_err (parent_dev, "can't register root hub for %s, %d\n", @@ -1891,7 +1889,10 @@ void usb_remove_hcd(struct usb_hcd *hcd) spin_lock_irq (&hcd_root_hub_lock); hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); + + down(&usb_bus_list_lock); usb_disconnect(&hcd->self.root_hub); + up(&usb_bus_list_lock); hcd->poll_rh = 0; del_timer_sync(&hcd->rh_timer); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 40c6c50c6bd..dd3bcfb2bcb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -32,7 +32,7 @@ #include "hub.h" /* Protect struct usb_device->state and ->children members - * Note: Both are also protected by ->serialize, except that ->state can + * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ static DEFINE_SPINLOCK(device_state_lock); @@ -975,8 +975,8 @@ static int locktree(struct usb_device *udev) /* when everyone grabs locks top->bottom, * non-overlapping work may be concurrent */ - down(&udev->serialize); - up(&hdev->serialize); + usb_lock_device(udev); + usb_unlock_device(hdev); return t + 1; } } @@ -1132,16 +1132,10 @@ void usb_disconnect(struct usb_device **pdev) * this quiesces everyting except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); - - /* lock the bus list on behalf of HCDs unregistering their root hubs */ - if (!udev->parent) { - down(&usb_bus_list_lock); - usb_lock_device(udev); - } else - down(&udev->serialize); - dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum); + usb_lock_device(udev); + /* Free up all the children before we remove this device */ for (i = 0; i < USB_MAXCHILDREN; i++) { if (udev->children[i]) @@ -1169,11 +1163,7 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); - if (!udev->parent) { - usb_unlock_device(udev); - up(&usb_bus_list_lock); - } else - up(&udev->serialize); + usb_unlock_device(udev); device_unregister(&udev->dev); } @@ -1243,8 +1233,8 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) * * This is called with devices which have been enumerated, but not yet * configured. The device descriptor is available, but not descriptors - * for any device configuration. The caller must have locked udev and - * either the parent hub (if udev is a normal device) or else the + * for any device configuration. The caller must have locked either + * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to * udev has already been installed, but udev is not yet visible through * sysfs or other filesystem code. @@ -1254,8 +1244,7 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) * * This call is synchronous, and may not be used in an interrupt context. * - * Only the hub driver should ever call this; root hub registration - * uses it indirectly. + * Only the hub driver or root-hub registrar should ever call this. */ int usb_new_device(struct usb_device *udev) { @@ -1364,6 +1353,8 @@ int usb_new_device(struct usb_device *udev) } usb_create_sysfs_dev_files (udev); + usb_lock_device(udev); + /* choose and set the configuration. that registers the interfaces * with the driver core, and lets usb device drivers bind to them. */ @@ -1385,6 +1376,8 @@ int usb_new_device(struct usb_device *udev) /* USB device state == configured ... usable */ usb_notify_add_device(udev); + usb_unlock_device(udev); + return 0; fail: @@ -1872,11 +1865,8 @@ int usb_resume_device(struct usb_device *udev) usb_unlock_device(udev); /* rebind drivers that had no suspend() */ - if (status == 0) { - usb_lock_all_devices(); + if (status == 0) bus_rescan_devices(&usb_bus_type); - usb_unlock_all_devices(); - } return status; } @@ -1889,14 +1879,14 @@ static int remote_wakeup(struct usb_device *udev) /* don't repeat RESUME sequence if this device * was already woken up by some other task */ - down(&udev->serialize); + usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "RESUME (wakeup)\n"); /* TRSMRCY = 10 msec */ msleep(10); status = finish_device_resume(udev); } - up(&udev->serialize); + usb_unlock_device(udev); #endif return status; } @@ -1997,7 +1987,7 @@ static int hub_resume(struct usb_interface *intf) if (!udev || status < 0) continue; - down (&udev->serialize); + usb_lock_device(udev); if (portstat & USB_PORT_STAT_SUSPEND) status = hub_port_resume(hub, port1, udev); else { @@ -2008,7 +1998,7 @@ static int hub_resume(struct usb_interface *intf) hub_port_logical_disconnect(hub, port1); } } - up(&udev->serialize); + usb_unlock_device(udev); } } #endif @@ -2573,7 +2563,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * udev becomes globally accessible, although presumably * no one will look at it until hdev is unlocked. */ - down (&udev->serialize); status = 0; /* We mustn't add new devices if the parent hub has @@ -2597,7 +2586,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - up (&udev->serialize); if (status) goto loop_disable; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 294e9f12747..fcfda21be49 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include @@ -49,8 +48,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ /* Not honored on modular build */ -static DECLARE_RWSEM(usb_all_devices_rwsem); - /** * usb_ifnum_to_if - get the interface object with a given interface number @@ -446,8 +443,6 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) dev->parent = parent; INIT_LIST_HEAD(&dev->filelist); - init_MUTEX(&dev->serialize); - return dev; } @@ -520,75 +515,20 @@ void usb_put_intf(struct usb_interface *intf) /* USB device locking * - * Although locking USB devices should be straightforward, it is - * complicated by the way the driver-model core works. When a new USB - * driver is registered or unregistered, the core will automatically - * probe or disconnect all matching interfaces on all USB devices while - * holding the USB subsystem writelock. There's no good way for us to - * tell which devices will be used or to lock them beforehand; our only - * option is to effectively lock all the USB devices. - * - * We do that by using a private rw-semaphore, usb_all_devices_rwsem. - * When locking an individual device you must first acquire the rwsem's - * readlock. When a driver is registered or unregistered the writelock - * must be held. These actions are encapsulated in the subroutines - * below, so all a driver needs to do is call usb_lock_device() and - * usb_unlock_device(). + * USB devices and interfaces are locked using the semaphore in their + * embedded struct device. The hub driver guarantees that whenever a + * device is connected or disconnected, drivers are called with the + * USB device locked as well as their particular interface. * * Complications arise when several devices are to be locked at the same * time. Only hub-aware drivers that are part of usbcore ever have to - * do this; nobody else needs to worry about it. The problem is that - * usb_lock_device() must not be called to lock a second device since it - * would acquire the rwsem's readlock reentrantly, leading to deadlock if - * another thread was waiting for the writelock. The solution is simple: - * - * When locking more than one device, call usb_lock_device() - * to lock the first one. Lock the others by calling - * down(&udev->serialize) directly. - * - * When unlocking multiple devices, use up(&udev->serialize) - * to unlock all but the last one. Unlock the last one by - * calling usb_unlock_device(). + * do this; nobody else needs to worry about it. The rule for locking + * is simple: * * When locking both a device and its parent, always lock the * the parent first. */ -/** - * usb_lock_device - acquire the lock for a usb device structure - * @udev: device that's being locked - * - * Use this routine when you don't hold any other device locks; - * to acquire nested inner locks call down(&udev->serialize) directly. - * This is necessary for proper interaction with usb_lock_all_devices(). - */ -void usb_lock_device(struct usb_device *udev) -{ - down_read(&usb_all_devices_rwsem); - down(&udev->serialize); -} - -/** - * usb_trylock_device - attempt to acquire the lock for a usb device structure - * @udev: device that's being locked - * - * Don't use this routine if you already hold a device lock; - * use down_trylock(&udev->serialize) instead. - * This is necessary for proper interaction with usb_lock_all_devices(). - * - * Returns 1 if successful, 0 if contention. - */ -int usb_trylock_device(struct usb_device *udev) -{ - if (!down_read_trylock(&usb_all_devices_rwsem)) - return 0; - if (down_trylock(&udev->serialize)) { - up_read(&usb_all_devices_rwsem); - return 0; - } - return 1; -} - /** * usb_lock_device_for_reset - cautiously acquire the lock for a * usb device structure @@ -627,7 +567,7 @@ int usb_lock_device_for_reset(struct usb_device *udev, } } - while (!usb_trylock_device(udev)) { + while (usb_trylock_device(udev) != 0) { /* If we can't acquire the lock after waiting one second, * we're probably deadlocked */ @@ -645,39 +585,6 @@ int usb_lock_device_for_reset(struct usb_device *udev, return 1; } -/** - * usb_unlock_device - release the lock for a usb device structure - * @udev: device that's being unlocked - * - * Use this routine when releasing the only device lock you hold; - * to release inner nested locks call up(&udev->serialize) directly. - * This is necessary for proper interaction with usb_lock_all_devices(). - */ -void usb_unlock_device(struct usb_device *udev) -{ - up(&udev->serialize); - up_read(&usb_all_devices_rwsem); -} - -/** - * usb_lock_all_devices - acquire the lock for all usb device structures - * - * This is necessary when registering a new driver or probing a bus, - * since the driver-model core may try to use any usb_device. - */ -void usb_lock_all_devices(void) -{ - down_write(&usb_all_devices_rwsem); -} - -/** - * usb_unlock_all_devices - release the lock for all usb device structures - */ -void usb_unlock_all_devices(void) -{ - up_write(&usb_all_devices_rwsem); -} - static struct usb_device *match_device(struct usb_device *dev, u16 vendor_id, u16 product_id) @@ -700,10 +607,10 @@ static struct usb_device *match_device(struct usb_device *dev, /* look through all of the children of this device */ for (child = 0; child < dev->maxchild; ++child) { if (dev->children[child]) { - down(&dev->children[child]->serialize); + usb_lock_device(dev->children[child]); ret_dev = match_device(dev->children[child], vendor_id, product_id); - up(&dev->children[child]->serialize); + usb_unlock_device(dev->children[child]); if (ret_dev) goto exit; } @@ -1300,10 +1207,7 @@ EXPORT_SYMBOL(usb_put_dev); EXPORT_SYMBOL(usb_get_dev); EXPORT_SYMBOL(usb_hub_tt_clear_buffer); -EXPORT_SYMBOL(usb_lock_device); -EXPORT_SYMBOL(usb_trylock_device); EXPORT_SYMBOL(usb_lock_device_for_reset); -EXPORT_SYMBOL(usb_unlock_device); EXPORT_SYMBOL(usb_driver_claim_interface); EXPORT_SYMBOL(usb_driver_release_interface); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 98e85fb4d3b..4647e1ebc68 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -16,9 +16,6 @@ extern int usb_get_device_descriptor(struct usb_device *dev, extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); -extern void usb_lock_all_devices(void); -extern void usb_unlock_all_devices(void); - extern void usb_kick_khubd(struct usb_device *dev); extern void usb_suspend_root_hub(struct usb_device *hdev); extern void usb_resume_root_hub(struct usb_device *dev); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 72e3b12a192..4b2226d77b3 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -372,7 +372,7 @@ done: & ohci->hc_control) == OHCI_USB_OPER && time_after (jiffies, ohci->next_statechange) - && usb_trylock_device (hcd->self.root_hub) + && usb_trylock_device (hcd->self.root_hub) == 0 ) { ohci_vdbg (ohci, "autosuspend\n"); (void) ohci_bus_suspend (hcd); diff --git a/include/linux/usb.h b/include/linux/usb.h index 2714814ab66..46dc0421d19 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -329,8 +329,6 @@ struct usb_device { struct usb_tt *tt; /* low/full speed dev, highspeed hub */ int ttport; /* device port on that tt hub */ - struct semaphore serialize; - unsigned int toggle[2]; /* one bit for each endpoint * ([0] = IN, [1] = OUT) */ @@ -377,11 +375,12 @@ struct usb_device { extern struct usb_device *usb_get_dev(struct usb_device *dev); extern void usb_put_dev(struct usb_device *dev); -extern void usb_lock_device(struct usb_device *udev); -extern int usb_trylock_device(struct usb_device *udev); +/* USB device locking */ +#define usb_lock_device(udev) down(&(udev)->dev.sem) +#define usb_unlock_device(udev) up(&(udev)->dev.sem) +#define usb_trylock_device(udev) down_trylock(&(udev)->dev.sem) extern int usb_lock_device_for_reset(struct usb_device *udev, struct usb_interface *iface); -extern void usb_unlock_device(struct usb_device *udev); /* USB port reset for device reinitialization */ extern int usb_reset_device(struct usb_device *dev); -- cgit v1.2.3-70-g09d2 From 7d069b7d80933004282c48edbe62526e4cb0aecc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 18 Nov 2005 12:06:34 -0500 Subject: [PATCH] USB: Disconnect children during hub unbind This patch (as606b) is an updated version of my earlier patch to disconnect children from a hub device when the hub driver is unbound. Thanks to the changes in the driver core locking, we now know that the entire hub device (and not just the interface) is locked whenever the hub driver's disconnect method runs. Hence it is safe to disconnect the child device structures immediately instead of deferring the job. The earlier version of the patch neglected to disable the hub's ports. We don't want to forget that; otherwise we'd end up with live devices using addresses that have been recycled. This update adds the necessary code. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 94 +++++++++++++++++--------------------------------- 1 file changed, 31 insertions(+), 63 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index dd3bcfb2bcb..02601f412f9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -515,6 +515,31 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) return ret; } + +/* caller has locked the hub device */ +static void hub_pre_reset(struct usb_hub *hub, int disable_ports) +{ + struct usb_device *hdev = hub->hdev; + int port1; + + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + if (hdev->children[port1 - 1]) { + usb_disconnect(&hdev->children[port1 - 1]); + if (disable_ports) + hub_port_disable(hub, port1, 0); + } + } + hub_quiesce(hub); +} + +/* caller has locked the hub device */ +static void hub_post_reset(struct usb_hub *hub) +{ + hub_activate(hub); + hub_power_on(hub); +} + + static int hub_configure(struct usb_hub *hub, struct usb_endpoint_descriptor *endpoint) { @@ -750,29 +775,10 @@ fail: static unsigned highspeed_hubs; -/* Called after the hub driver is unbound from a hub with children */ -static void hub_remove_children_work(void *__hub) -{ - struct usb_hub *hub = __hub; - struct usb_device *hdev = hub->hdev; - int i; - - kfree(hub); - - usb_lock_device(hdev); - for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); - } - usb_unlock_device(hdev); - usb_put_dev(hdev); -} - static void hub_disconnect(struct usb_interface *intf) { struct usb_hub *hub = usb_get_intfdata (intf); struct usb_device *hdev; - int n, port1; usb_set_intfdata (intf, NULL); hdev = hub->hdev; @@ -780,7 +786,9 @@ static void hub_disconnect(struct usb_interface *intf) if (hdev->speed == USB_SPEED_HIGH) highspeed_hubs--; - hub_quiesce(hub); + /* Disconnect all children and quiesce the hub */ + hub_pre_reset(hub, 1); + usb_free_urb(hub->urb); hub->urb = NULL; @@ -800,27 +808,7 @@ static void hub_disconnect(struct usb_interface *intf) hub->buffer = NULL; } - /* If there are any children then this is an unbind only, not a - * physical disconnection. The active ports must be disabled - * and later on we must call usb_disconnect(). We can't call - * it now because we may not hold the hub's device lock. - */ - n = 0; - for (port1 = 1; port1 <= hdev->maxchild; ++port1) { - if (hdev->children[port1 - 1]) { - ++n; - hub_port_disable(hub, port1, 1); - } - } - - if (n == 0) - kfree(hub); - else { - /* Reuse the hub->leds work_struct for our own purposes */ - INIT_WORK(&hub->leds, hub_remove_children_work, hub); - schedule_work(&hub->leds); - usb_get_dev(hdev); - } + kfree(hub); } static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -917,26 +905,6 @@ hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) } } -/* caller has locked the hub device */ -static void hub_pre_reset(struct usb_hub *hub) -{ - struct usb_device *hdev = hub->hdev; - int i; - - for (i = 0; i < hdev->maxchild; ++i) { - if (hdev->children[i]) - usb_disconnect(&hdev->children[i]); - } - hub_quiesce(hub); -} - -/* caller has locked the hub device */ -static void hub_post_reset(struct usb_hub *hub) -{ - hub_activate(hub); - hub_power_on(hub); -} - /* grab device/port lock, returning index of that port (zero based). * protects the upstream link used by this device from concurrent @@ -2682,7 +2650,7 @@ static void hub_events(void) /* If the hub has died, clean up after it */ if (hdev->state == USB_STATE_NOTATTACHED) { - hub_pre_reset(hub); + hub_pre_reset(hub, 0); goto loop; } @@ -2997,7 +2965,7 @@ int usb_reset_device(struct usb_device *udev) udev->actconfig->interface[0]->dev.driver == &hub_driver.driver && (hub = hdev_to_hub(udev)) != NULL) { - hub_pre_reset(hub); + hub_pre_reset(hub, 0); } set_bit(port1, parent_hub->busy_bits); -- cgit v1.2.3-70-g09d2 From 4bf0ba861442d289eebfad8ea9ce365ab04fd582 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 21 Nov 2005 11:58:07 -0500 Subject: [PATCH] USB: Fix locking for USB suspend/resume The earlier USB locking updates didn't touch the suspend/resume routines. They need updating as well, since now the caller holds the device semaphore. This patch (as608) makes the necessary changes. It also adds a line to store the correct power state when a device is resumed, something which was unaccountably missing. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 54 ++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 02601f412f9..895ac829b9c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1648,15 +1648,22 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) int usb_suspend_device(struct usb_device *udev) { #ifdef CONFIG_USB_SUSPEND - int port1, status; + int port1; - port1 = locktree(udev); - if (port1 < 0) - return port1; + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (!udev->parent) + port1 = 0; + else { + for (port1 = udev->parent->maxchild; port1 > 0; --port1) { + if (udev->parent->children[port1-1] == udev) + break; + } + if (port1 == 0) + return -ENODEV; + } - status = __usb_suspend_device(udev, port1); - usb_unlock_device(udev); - return status; + return __usb_suspend_device(udev, port1); #else /* NOTE: udev->state unchanged, it's not lying ... */ udev->dev.power.power_state = PMSG_SUSPEND; @@ -1688,6 +1695,7 @@ static int finish_device_resume(struct usb_device *udev) usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED : USB_STATE_ADDRESS); + udev->dev.power.power_state = PMSG_ON; /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -1723,8 +1731,14 @@ static int finish_device_resume(struct usb_device *udev) * may have a child resume event to deal with soon */ resume = udev->dev.bus->resume; - for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) - (void) resume(&udev->actconfig->interface[i]->dev); + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + struct device *dev = + &udev->actconfig->interface[i]->dev; + + down(&dev->sem); + (void) resume(dev); + up(&dev->sem); + } status = 0; } else if (udev->devnum <= 0) { @@ -1809,9 +1823,18 @@ int usb_resume_device(struct usb_device *udev) { int port1, status; - port1 = locktree(udev); - if (port1 < 0) - return port1; + if (udev->state == USB_STATE_NOTATTACHED) + return -ENODEV; + if (!udev->parent) + port1 = 0; + else { + for (port1 = udev->parent->maxchild; port1 > 0; --port1) { + if (udev->parent->children[port1-1] == udev) + break; + } + if (port1 == 0) + return -ENODEV; + } #ifdef CONFIG_USB_SUSPEND /* selective resume of one downstream hub-to-device port */ @@ -1830,11 +1853,12 @@ int usb_resume_device(struct usb_device *udev) dev_dbg(&udev->dev, "can't resume, status %d\n", status); - usb_unlock_device(udev); - /* rebind drivers that had no suspend() */ - if (status == 0) + if (status == 0) { + usb_unlock_device(udev); bus_rescan_devices(&usb_bus_type); + usb_lock_device(udev); + } return status; } -- cgit v1.2.3-70-g09d2 From 3d48586cfa2e197515605ccf74527983d35638e3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 20 Nov 2005 23:56:11 +0100 Subject: [PATCH] USB: small cleanups This patch contains the following cleanups: - make needlessly global functions static - every file should #include the headers containing the prototypes for it's global functions Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/usbatm.c | 4 ++-- drivers/usb/serial/io_ti.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 2e6593e6c1b..9baa6296fc9 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -646,14 +646,14 @@ static void usbatm_destroy_instance(struct kref *kref) kfree(instance); } -void usbatm_get_instance(struct usbatm_data *instance) +static void usbatm_get_instance(struct usbatm_data *instance) { dbg("%s", __func__); kref_get(&instance->refcount); } -void usbatm_put_instance(struct usbatm_data *instance) +static void usbatm_put_instance(struct usbatm_data *instance) { dbg("%s", __func__); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 22ad1a5a8f9..2edf9cabad2 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2843,7 +2843,7 @@ static struct edge_buf *edge_buf_alloc(unsigned int size) * Free the buffer and all associated memory. */ -void edge_buf_free(struct edge_buf *eb) +static void edge_buf_free(struct edge_buf *eb) { if (eb) { kfree(eb->buf_buf); -- cgit v1.2.3-70-g09d2 From 949bf6431189c62eeebd3b52201406ba9978f525 Mon Sep 17 00:00:00 2001 From: Fengwei Yin Date: Fri, 18 Nov 2005 10:35:36 +0800 Subject: [PATCH] USB: One potential problem in gadget/serial.c It looks like that the gs_serial module maybe sleep with spinlock in gs_close. Sometimes, system hang when I remove the gs_serial module. From: Fengwei Yin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/serial.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index b35ac6d334f..65e084a2c87 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -890,10 +890,12 @@ static void gs_close(struct tty_struct *tty, struct file *file) /* wait for write buffer to drain, or */ /* at most GS_CLOSE_TIMEOUT seconds */ if (gs_buf_data_avail(port->port_write_buf) > 0) { + spin_unlock_irqrestore(&port->port_lock, flags); wait_cond_interruptible_timeout(port->port_write_wait, port->port_dev == NULL || gs_buf_data_avail(port->port_write_buf) == 0, &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ); + spin_lock_irqsave(&port->port_lock, flags); } /* free disconnected port on final close */ -- cgit v1.2.3-70-g09d2 From 55c527187c9d78f840b284d596a0b298bc1493af Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Nov 2005 12:03:12 -0500 Subject: [PATCH] USB: Consider power budget when choosing configuration This patch (as609) changes the way we keep track of power budgeting for USB hubs and devices, and it updates the choose_configuration routine to take this information into account. (This is something we should have been doing all along.) A new field in struct usb_device holds the amount of bus current available from the upstream port, and the usb_hub structure keeps track of the current available for each downstream port. Two new rules for configuration selection are added: Don't select a self-powered configuration when only bus power is available. Don't select a configuration requiring more bus power than is available. However the first rule is #if-ed out, because I found that the internal hub in my HP USB keyboard claims that its only configuration is self-powered. The rule would prevent the configuration from being chosen, leaving the hub & keyboard unconfigured. Since similar descriptor errors may turn out to be fairly common, it seemed wise not to include a rule that would break automatic configuration unnecessarily for such devices. The second rule may also trigger unnecessarily, although this should be less common. More likely it will annoy people by sometimes failing to accept configurations that should never have been chosen in the first place. The patch also changes usbcore's reaction when no configuration is suitable. Instead of raising an error and rejecting the device, now the core will simply leave the device unconfigured. People can always work around such problems by installing configurations manually through sysfs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 5 +- drivers/usb/core/hub.c | 229 ++++++++++++++++++++++++++++++--------------- drivers/usb/core/hub.h | 3 +- drivers/usb/core/message.c | 6 ++ include/linux/usb.h | 2 + 5 files changed, 164 insertions(+), 81 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index d16a0e8a7d7..0018bbc4de3 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1825,8 +1825,6 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } - rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH : - USB_SPEED_FULL; /* Although in principle hcd->driver->start() might need to use rhdev, * none of the current drivers do. @@ -1844,6 +1842,9 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); hcd->remote_wakeup = hcd->can_wakeup; + rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH : + USB_SPEED_FULL; + rhdev->bus_mA = min(500u, hcd->power_budget); if ((retval = register_root_hub(rhdev, hcd)) != 0) goto err_register_root_hub; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 895ac829b9c..b311005ff1a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -702,26 +702,40 @@ static int hub_configure(struct usb_hub *hub, * and battery-powered root hubs (may provide just 8 mA). */ ret = usb_get_status(hdev, USB_RECIP_DEVICE, 0, &hubstatus); - if (ret < 0) { + if (ret < 2) { message = "can't get hub status"; goto fail; } le16_to_cpus(&hubstatus); if (hdev == hdev->bus->root_hub) { - struct usb_hcd *hcd = - container_of(hdev->bus, struct usb_hcd, self); - - hub->power_budget = min(500u, hcd->power_budget) / 2; + if (hdev->bus_mA == 0 || hdev->bus_mA >= 500) + hub->mA_per_port = 500; + else { + hub->mA_per_port = hdev->bus_mA; + hub->limited_power = 1; + } } else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) { dev_dbg(hub_dev, "hub controller current requirement: %dmA\n", hub->descriptor->bHubContrCurrent); - hub->power_budget = (501 - hub->descriptor->bHubContrCurrent) - / 2; + hub->limited_power = 1; + if (hdev->maxchild > 0) { + int remaining = hdev->bus_mA - + hub->descriptor->bHubContrCurrent; + + if (remaining < hdev->maxchild * 100) + dev_warn(hub_dev, + "insufficient power available " + "to use all downstream ports\n"); + hub->mA_per_port = 100; /* 7.2.1.1 */ + } + } else { /* Self-powered external hub */ + /* FIXME: What about battery-powered external hubs that + * provide less current per port? */ + hub->mA_per_port = 500; } - if (hub->power_budget) - dev_dbg(hub_dev, "%dmA bus power budget for children\n", - hub->power_budget * 2); - + if (hub->mA_per_port < 500) + dev_dbg(hub_dev, "%umA bus power budget for each child\n", + hub->mA_per_port); ret = hub_hub_status(hub, &hubstatus, &hubchange); if (ret < 0) { @@ -1136,45 +1150,107 @@ void usb_disconnect(struct usb_device **pdev) device_unregister(&udev->dev); } +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + static int choose_configuration(struct usb_device *udev) { - int c, i; + int i; + u16 devstatus; + int bus_powered; + int num_configs; + struct usb_host_config *c, *best; + + /* If this fails, assume the device is bus-powered */ + devstatus = 0; + usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); + le16_to_cpus(&devstatus); + bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0); + dev_dbg(&udev->dev, "device is %s-powered\n", + bus_powered ? "bus" : "self"); + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = + &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif - /* NOTE: this should interact with hub power budgeting */ + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ - c = udev->config[0].desc.bConfigurationValue; - if (udev->descriptor.bNumConfigurations != 1) { - for (i = 0; i < udev->descriptor.bNumConfigurations; i++) { - struct usb_interface_descriptor *desc; + /* Rule out configs that draw too much bus current */ + if (c->desc.bMaxPower * 2 > udev->bus_mA) + continue; - /* heuristic: Linux is more likely to have class - * drivers, so avoid vendor-specific interfaces. - */ - desc = &udev->config[i].intf_cache[0] - ->altsetting->desc; - if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC) - continue; - /* COMM/2/all is CDC ACM, except 0xff is MSFT RNDIS. - * MSFT needs this to be the first config; never use - * it as the default unless Linux has host-side RNDIS. - * A second config would ideally be CDC-Ethernet, but - * may instead be the "vendor specific" CDC subset - * long used by ARM Linux for sa1100 or pxa255. - */ - if (desc->bInterfaceClass == USB_CLASS_COMM - && desc->bInterfaceSubClass == 2 - && desc->bInterfaceProtocol == 0xff) { - c = udev->config[1].desc.bConfigurationValue; - continue; - } - c = udev->config[i].desc.bConfigurationValue; + /* If the first config's first interface is COMM/2/0xff + * (MSFT RNDIS), rule it out unless Linux has host-side + * RNDIS support. */ + if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff) { +#ifndef CONFIG_USB_NET_RNDIS + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC) { + best = c; break; } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (best) { + i = best->desc.bConfigurationValue; dev_info(&udev->dev, - "configuration #%d chosen from %d choices\n", - c, udev->descriptor.bNumConfigurations); + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); } - return c; + return i; } #ifdef DEBUG @@ -1327,17 +1403,13 @@ int usb_new_device(struct usb_device *udev) * with the driver core, and lets usb device drivers bind to them. */ c = choose_configuration(udev); - if (c < 0) - dev_warn(&udev->dev, - "can't choose an initial configuration\n"); - else { + if (c >= 0) { err = usb_set_configuration(udev, c); if (err) { dev_err(&udev->dev, "can't set config #%d, error %d\n", c, err); - usb_remove_sysfs_dev_files(udev); - device_del(&udev->dev); - goto fail; + /* This need not be fatal. The user can try to + * set other configurations. */ } } @@ -1702,7 +1774,7 @@ static int finish_device_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); - if (status < 0) + if (status < 2) dev_dbg(&udev->dev, "gone after usb resume? status %d\n", status); @@ -1711,7 +1783,7 @@ static int finish_device_resume(struct usb_device *udev) int (*resume)(struct device *); le16_to_cpus(&devstatus); - if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP) + if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) && udev->parent) { status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -2374,39 +2446,36 @@ hub_power_remaining (struct usb_hub *hub) { struct usb_device *hdev = hub->hdev; int remaining; - unsigned i; + int port1; - remaining = hub->power_budget; - if (!remaining) /* self-powered */ + if (!hub->limited_power) return 0; - for (i = 0; i < hdev->maxchild; i++) { - struct usb_device *udev = hdev->children[i]; - int delta, ceiling; + remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent; + for (port1 = 1; port1 <= hdev->maxchild; ++port1) { + struct usb_device *udev = hdev->children[port1 - 1]; + int delta; if (!udev) continue; - /* 100mA per-port ceiling, or 8mA for OTG ports */ - if (i != (udev->bus->otg_port - 1) || hdev->parent) - ceiling = 50; - else - ceiling = 4; - + /* Unconfigured devices may not use more than 100mA, + * or 8mA for OTG ports */ if (udev->actconfig) - delta = udev->actconfig->desc.bMaxPower; + delta = udev->actconfig->desc.bMaxPower * 2; + else if (port1 != udev->bus->otg_port || hdev->parent) + delta = 100; else - delta = ceiling; - // dev_dbg(&udev->dev, "budgeted %dmA\n", 2 * delta); - if (delta > ceiling) - dev_warn(&udev->dev, "%dmA over %dmA budget!\n", - 2 * (delta - ceiling), 2 * ceiling); + delta = 8; + if (delta > hub->mA_per_port) + dev_warn(&udev->dev, "%dmA is over %umA budget " + "for port %d!\n", + delta, hub->mA_per_port, port1); remaining -= delta; } if (remaining < 0) { - dev_warn(hub->intfdev, - "%dmA over power budget!\n", - -2 * remaining); + dev_warn(hub->intfdev, "%dmA over power budget!\n", + - remaining); remaining = 0; } return remaining; @@ -2501,7 +2570,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_set_device_state(udev, USB_STATE_POWERED); udev->speed = USB_SPEED_UNKNOWN; - + udev->bus_mA = hub->mA_per_port; + /* set the address */ choose_address(udev); if (udev->devnum <= 0) { @@ -2521,16 +2591,16 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, * on the parent. */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB - && hub->power_budget) { + && udev->bus_mA <= 100) { u16 devstat; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstat); - if (status < 0) { + if (status < 2) { dev_dbg(&udev->dev, "get status %d ?\n", status); goto loop_disable; } - cpu_to_le16s(&devstat); + le16_to_cpus(&devstat); if ((devstat & (1 << USB_DEVICE_SELF_POWERED)) == 0) { dev_err(&udev->dev, "can't connect bus-powered hub " @@ -2583,9 +2653,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, status = hub_power_remaining(hub); if (status) - dev_dbg(hub_dev, - "%dmA power budget left\n", - 2 * status); + dev_dbg(hub_dev, "%dmA power budget left\n", status); return; @@ -2797,6 +2865,11 @@ static void hub_events(void) if (hubchange & HUB_CHANGE_LOCAL_POWER) { dev_dbg (hub_dev, "power change\n"); clear_hub_feature(hdev, C_HUB_LOCAL_POWER); + if (hubstatus & HUB_STATUS_LOCAL_POWER) + /* FIXME: Is this always true? */ + hub->limited_power = 0; + else + hub->limited_power = 1; } if (hubchange & HUB_CHANGE_OVERCURRENT) { dev_dbg (hub_dev, "overcurrent change\n"); diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index bf23f897802..29d5f45a845 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -220,8 +220,9 @@ struct usb_hub { struct usb_hub_descriptor *descriptor; /* class descriptor */ struct usb_tt tt; /* Transaction Translator */ - u8 power_budget; /* in 2mA units; or zero */ + unsigned mA_per_port; /* current for each child */ + unsigned limited_power:1; unsigned quiescing:1; unsigned activating:1; unsigned resume_root_hub:1; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index fe74f99ca5f..99ab774d4fd 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1387,6 +1387,12 @@ free_interfaces: if (dev->state != USB_STATE_ADDRESS) usb_disable_device (dev, 1); // Skip ep0 + n = dev->bus_mA - cp->desc.bMaxPower * 2; + if (n < 0) + dev_warn(&dev->dev, "new config #%d exceeds power " + "limit by %dmA\n", + configuration, -n); + if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 0, configuration, 0, NULL, 0, USB_CTRL_SET_TIMEOUT)) < 0) diff --git a/include/linux/usb.h b/include/linux/usb.h index 46dc0421d19..27575e678a7 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -347,6 +347,8 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ + unsigned short bus_mA; /* Current available from the bus */ + int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3-70-g09d2 From 12c3da346eb81b6a281031f62eda3bca993dff5a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 23 Nov 2005 12:09:52 -0500 Subject: [PATCH] USB: Store port number in usb_device This patch (as610) adds a field to struct usb_device to store the device's port number. This allows us to remove several loops in the hub driver (searching for a particular device among all the entries in the parent's array of children). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 79 ++++++++++++-------------------------------------- drivers/usb/core/usb.c | 1 + include/linux/usb.h | 1 + 3 files changed, 20 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b311005ff1a..a523c8f20b5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -946,24 +946,21 @@ static int locktree(struct usb_device *udev) t = locktree(hdev); if (t < 0) return t; - for (t = 0; t < hdev->maxchild; t++) { - if (hdev->children[t] == udev) { - /* everything is fail-fast once disconnect - * processing starts - */ - if (udev->state == USB_STATE_NOTATTACHED) - break; - /* when everyone grabs locks top->bottom, - * non-overlapping work may be concurrent - */ - usb_lock_device(udev); - usb_unlock_device(hdev); - return t + 1; - } + /* everything is fail-fast once disconnect + * processing starts + */ + if (udev->state == USB_STATE_NOTATTACHED) { + usb_unlock_device(hdev); + return -ENODEV; } + + /* when everyone grabs locks top->bottom, + * non-overlapping work may be concurrent + */ + usb_lock_device(udev); usb_unlock_device(hdev); - return -ENODEV; + return udev->portnum; } static void recursively_mark_NOTATTACHED(struct usb_device *udev) @@ -1335,15 +1332,9 @@ int usb_new_device(struct usb_device *udev) le16_to_cpu(udev->config[0].desc.wTotalLength), USB_DT_OTG, (void **) &desc) == 0) { if (desc->bmAttributes & USB_OTG_HNP) { - unsigned port1; + unsigned port1 = udev->portnum; struct usb_device *root = udev->parent; - for (port1 = 1; port1 <= root->maxchild; - port1++) { - if (root->children[port1-1] == udev) - break; - } - dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n", (port1 == bus->otg_port) @@ -1720,22 +1711,9 @@ static int __usb_suspend_device (struct usb_device *udev, int port1) int usb_suspend_device(struct usb_device *udev) { #ifdef CONFIG_USB_SUSPEND - int port1; - if (udev->state == USB_STATE_NOTATTACHED) return -ENODEV; - if (!udev->parent) - port1 = 0; - else { - for (port1 = udev->parent->maxchild; port1 > 0; --port1) { - if (udev->parent->children[port1-1] == udev) - break; - } - if (port1 == 0) - return -ENODEV; - } - - return __usb_suspend_device(udev, port1); + return __usb_suspend_device(udev, udev->portnum); #else /* NOTE: udev->state unchanged, it's not lying ... */ udev->dev.power.power_state = PMSG_SUSPEND; @@ -1893,20 +1871,10 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev) */ int usb_resume_device(struct usb_device *udev) { - int port1, status; + int status; if (udev->state == USB_STATE_NOTATTACHED) return -ENODEV; - if (!udev->parent) - port1 = 0; - else { - for (port1 = udev->parent->maxchild; port1 > 0; --port1) { - if (udev->parent->children[port1-1] == udev) - break; - } - if (port1 == 0) - return -ENODEV; - } #ifdef CONFIG_USB_SUSPEND /* selective resume of one downstream hub-to-device port */ @@ -1915,7 +1883,7 @@ int usb_resume_device(struct usb_device *udev) // NOTE swsusp may bork us, device state being wrong... // NOTE this fails if parent is also suspended... status = hub_port_resume(hdev_to_hub(udev->parent), - port1, udev); + udev->portnum, udev); } else status = 0; } else @@ -3029,7 +2997,8 @@ int usb_reset_device(struct usb_device *udev) struct usb_hub *parent_hub; struct usb_device_descriptor descriptor = udev->descriptor; struct usb_hub *hub = NULL; - int i, ret = 0, port1 = -1; + int i, ret = 0; + int port1 = udev->portnum; if (udev->state == USB_STATE_NOTATTACHED || udev->state == USB_STATE_SUSPENDED) { @@ -3043,18 +3012,6 @@ int usb_reset_device(struct usb_device *udev) dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__); return -EISDIR; } - - for (i = 0; i < parent_hdev->maxchild; i++) - if (parent_hdev->children[i] == udev) { - port1 = i + 1; - break; - } - - if (port1 < 0) { - /* If this ever happens, it's very bad */ - dev_err(&udev->dev, "Can't locate device's port!\n"); - return -ENOENT; - } parent_hub = hdev_to_hub(parent_hdev); /* If we're resetting an active hub, take some special actions */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index fcfda21be49..39e6b61b898 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -439,6 +439,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) /* hub driver sets up TT records */ } + dev->portnum = port1; dev->bus = bus; dev->parent = parent; INIT_LIST_HEAD(&dev->filelist); diff --git a/include/linux/usb.h b/include/linux/usb.h index 27575e678a7..e59d1bd52d4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -348,6 +348,7 @@ struct usb_device { char **rawdescriptors; /* Raw descriptors for each config */ unsigned short bus_mA; /* Current available from the bus */ + u8 portnum; /* Parent port number (origin 1) */ int have_langid; /* whether string_langid is valid */ int string_langid; /* language ID for strings */ -- cgit v1.2.3-70-g09d2 From 3aea4a76a3ec4e6484f6316a97efff8b144b2b11 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 27 Nov 2005 09:47:28 -0500 Subject: [PATCH] USB: Cleanups for usb gadget mass-storage Remove useless initalizers. Signed-off-by: Pavel Machek Signed-off-by: Alan Stern --- drivers/usb/gadget/file_storage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f6f0b2aa114..f6c49b717d3 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -336,8 +336,8 @@ MODULE_LICENSE("Dual BSD/GPL"); #define MAX_LUNS 8 /* Arggh! There should be a module_param_array_named macro! */ -static char *file[MAX_LUNS] = {NULL, }; -static int ro[MAX_LUNS] = {0, }; +static char *file[MAX_LUNS]; +static int ro[MAX_LUNS]; static struct { int num_filenames; -- cgit v1.2.3-70-g09d2 From 717f736d937d0e98e964375dac770bfa20f73b72 Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Sat, 26 Nov 2005 01:58:36 +0200 Subject: [PATCH] USB: isp116x-hcd: minor cleanup When going to suspend, there's no point in setting HC state in host controller driver as USB core takes care of this. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index c95af116f9e..83447919202 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1426,7 +1426,6 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) val = isp116x_read_reg32(isp116x, HCCONTROL); switch (val & HCCONTROL_HCFS) { case HCCONTROL_USB_OPER: - hcd->state = HC_STATE_QUIESCING; val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; if (device_may_wakeup(&hcd->self.root_hub->dev)) @@ -1434,7 +1433,6 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) /* Wait for usb transfers to finish */ mdelay(2); isp116x_write_reg32(isp116x, HCCONTROL, val); - hcd->state = HC_STATE_SUSPENDED; /* Wait for devices to suspend */ mdelay(5); case HCCONTROL_USB_SUSPEND: -- cgit v1.2.3-70-g09d2 From 487f9c6710e7dff338e59820f6cfaeaaa87cb532 Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Mon, 28 Nov 2005 19:16:05 -0200 Subject: [PATCH] USB: usbserial: Adds missing checks and bug fix. Checks if 'port' is NULL before using it in all tty operations, this can avoid NULL pointer dereferences. Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 12aaf18ff9e..5bc023c7389 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -188,6 +188,8 @@ static int serial_open (struct tty_struct *tty, struct file * filp) portNumber = tty->index - serial->minor; port = serial->port[portNumber]; + if (!port) + return -ENODEV; ++port->open_count; @@ -258,6 +260,9 @@ static int serial_write (struct tty_struct * tty, const unsigned char *buf, int struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count); if (!port->open_count) { @@ -277,6 +282,9 @@ static int serial_write_room (struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -296,6 +304,9 @@ static int serial_chars_in_buffer (struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; int retval = -EINVAL; + if (!port) + goto exit; + dbg("%s = port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -314,6 +325,9 @@ static void serial_throttle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -330,6 +344,9 @@ static void serial_unthrottle (struct tty_struct * tty) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -347,6 +364,9 @@ static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned in struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; + if (!port) + goto exit; + dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd); if (!port->open_count) { @@ -368,6 +388,9 @@ static void serial_set_termios (struct tty_struct *tty, struct termios * old) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -384,6 +407,9 @@ static void serial_break (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; + if (!port) + return; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -445,6 +471,9 @@ static int serial_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { @@ -464,6 +493,9 @@ static int serial_tiocmset (struct tty_struct *tty, struct file *file, { struct usb_serial_port *port = tty->driver_data; + if (!port) + goto exit; + dbg("%s - port %d", __FUNCTION__, port->number); if (!port->open_count) { -- cgit v1.2.3-70-g09d2 From 8a4613f01f5bb850cab34e3db572d97251d997b3 Mon Sep 17 00:00:00 2001 From: Luiz Fernando Capitulino Date: Mon, 28 Nov 2005 19:16:07 -0200 Subject: [PATCH] USB: usbserial: race-condition fix. There is a race-condition in usb-serial driver that can be triggered if a processes does 'port->tty->driver_data = NULL' in serial_close() while other processes is in kernel-space about to call serial_ioctl() on the same port. This happens because a process can open the device while there is another one closing it. The patch below fixes that by adding a semaphore to ensure that no process will open the device while another process is closing it. Note that we can't use spinlocks here, since serial_open() and serial_close() can sleep. Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 14 +++++++++++++- drivers/usb/serial/usb-serial.h | 4 ++++ 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 5bc023c7389..8bc8337c99c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "usb-serial.h" #include "pl2303.h" @@ -190,6 +191,9 @@ static int serial_open (struct tty_struct *tty, struct file * filp) port = serial->port[portNumber]; if (!port) return -ENODEV; + + if (down_interruptible(&port->sem)) + return -ERESTARTSYS; ++port->open_count; @@ -215,6 +219,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp) goto bailout_module_put; } + up(&port->sem); return 0; bailout_module_put: @@ -222,6 +227,7 @@ bailout_module_put: bailout_kref_put: kref_put(&serial->kref, destroy_serial); port->open_count = 0; + up(&port->sem); return retval; } @@ -234,8 +240,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp) dbg("%s - port %d", __FUNCTION__, port->number); + down(&port->sem); + if (port->open_count == 0) - return; + goto out; --port->open_count; if (port->open_count == 0) { @@ -253,6 +261,9 @@ static void serial_close(struct tty_struct *tty, struct file * filp) } kref_put(&port->serial->kref, destroy_serial); + +out: + up(&port->sem); } static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count) @@ -774,6 +785,7 @@ int usb_serial_probe(struct usb_interface *interface, port->number = i + serial->minor; port->serial = serial; spin_lock_init(&port->lock); + sema_init(&port->sem, 1); INIT_WORK(&port->work, usb_serial_port_softint, port); serial->port[i] = port; } diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h index 238a5a871ed..d7d27c3385b 100644 --- a/drivers/usb/serial/usb-serial.h +++ b/drivers/usb/serial/usb-serial.h @@ -16,6 +16,7 @@ #include #include +#include #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ #define SERIAL_TTY_MINORS 255 /* loads of devices :) */ @@ -30,6 +31,8 @@ * @serial: pointer back to the struct usb_serial owner of this port. * @tty: pointer to the corresponding tty for this port. * @lock: spinlock to grab when updating portions of this structure. + * @sem: semaphore used to synchronize serial_open() and serial_close() + * access for this port. * @number: the number of the port (the minor number). * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. @@ -60,6 +63,7 @@ struct usb_serial_port { struct usb_serial * serial; struct tty_struct * tty; spinlock_t lock; + struct semaphore sem; unsigned char number; unsigned char * interrupt_in_buffer; -- cgit v1.2.3-70-g09d2 From 5d3202949c9ac6e135d98bde15a8f05ad3fa5849 Mon Sep 17 00:00:00 2001 From: Daniel Ritz Date: Sun, 27 Nov 2005 22:23:38 +0100 Subject: [PATCH] USB: input/touchkitusb: handle multiple packets Some versions of the controller seem to put multiple report packet into a single urb. also it can happen that a packet is split across multiple urbs. unpatched you get a jumpy cursor on some screens. the patch does: - handle multiple packets per urb - handle packets split across multiple urb - check packet type - cleanups Signed-off-by: Daniel Ritz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/touchkitusb.c | 148 ++++++++++++++++++++++++++++++++++------ 1 file changed, 126 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 75e7c12e718..3b3c7b4120a 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -1,7 +1,7 @@ /****************************************************************************** * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens * - * Copyright (C) 2004 by Daniel Ritz + * Copyright (C) 2004-2005 by Daniel Ritz * Copyright (C) by Todd E. Johnson (mtouchusb.c) * * This program is free software; you can redistribute it and/or @@ -41,15 +41,13 @@ #define TOUCHKIT_MAX_YC 0x07ff #define TOUCHKIT_YC_FUZZ 0x0 #define TOUCHKIT_YC_FLAT 0x0 -#define TOUCHKIT_REPORT_DATA_SIZE 8 +#define TOUCHKIT_REPORT_DATA_SIZE 16 #define TOUCHKIT_DOWN 0x01 -#define TOUCHKIT_POINT_TOUCH 0x81 -#define TOUCHKIT_POINT_NOTOUCH 0x80 -#define TOUCHKIT_GET_TOUCHED(dat) ((((dat)[0]) & TOUCHKIT_DOWN) ? 1 : 0) -#define TOUCHKIT_GET_X(dat) (((dat)[3] << 7) | (dat)[4]) -#define TOUCHKIT_GET_Y(dat) (((dat)[1] << 7) | (dat)[2]) +#define TOUCHKIT_PKT_TYPE_MASK 0xFE +#define TOUCHKIT_PKT_TYPE_REPT 0x80 +#define TOUCHKIT_PKT_TYPE_DIAG 0x0A #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Daniel Ritz " @@ -62,6 +60,8 @@ MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); struct touchkit_usb { unsigned char *data; dma_addr_t data_dma; + char buffer[TOUCHKIT_REPORT_DATA_SIZE]; + int buf_len; struct urb *irq; struct usb_device *udev; struct input_dev *input; @@ -77,11 +77,128 @@ static struct usb_device_id touchkit_devices[] = { {} }; +/* helpers to read the data */ +static inline int touchkit_get_touched(char *data) +{ + return (data[0] & TOUCHKIT_DOWN) ? 1 : 0; +} + +static inline int touchkit_get_x(char *data) +{ + return ((data[3] & 0x0F) << 7) | (data[4] & 0x7F); +} + +static inline int touchkit_get_y(char *data) +{ + return ((data[1] & 0x0F) << 7) | (data[2] & 0x7F); +} + + +/* processes one input packet. */ +static void touchkit_process_pkt(struct touchkit_usb *touchkit, + struct pt_regs *regs, char *pkt) +{ + int x, y; + + /* only process report packets */ + if ((pkt[0] & TOUCHKIT_PKT_TYPE_MASK) != TOUCHKIT_PKT_TYPE_REPT) + return; + + if (swap_xy) { + y = touchkit_get_x(pkt); + x = touchkit_get_y(pkt); + } else { + x = touchkit_get_x(pkt); + y = touchkit_get_y(pkt); + } + + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, touchkit_get_touched(pkt)); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); +} + + +static int touchkit_get_pkt_len(char *buf) +{ + switch (buf[0] & TOUCHKIT_PKT_TYPE_MASK) { + case TOUCHKIT_PKT_TYPE_REPT: + return 5; + + case TOUCHKIT_PKT_TYPE_DIAG: + return buf[1] + 2; + } + + return 0; +} + +static void touchkit_process(struct touchkit_usb *touchkit, int len, + struct pt_regs *regs) +{ + char *buffer; + int pkt_len, buf_len, pos; + + /* if the buffer contains data, append */ + if (unlikely(touchkit->buf_len)) { + int tmp; + + /* if only 1 byte in buffer, add another one to get length */ + if (touchkit->buf_len == 1) + touchkit->buffer[1] = touchkit->data[0]; + + pkt_len = touchkit_get_pkt_len(touchkit->buffer); + + /* unknown packet: drop everything */ + if (!pkt_len) + return; + + /* append, process */ + tmp = pkt_len - touchkit->buf_len; + memcpy(touchkit->buffer + touchkit->buf_len, touchkit->data, tmp); + touchkit_process_pkt(touchkit, regs, touchkit->buffer); + + buffer = touchkit->data + tmp; + buf_len = len - tmp; + } else { + buffer = touchkit->data; + buf_len = len; + } + + /* only one byte left in buffer */ + if (unlikely(buf_len == 1)) { + touchkit->buffer[0] = buffer[0]; + touchkit->buf_len = 1; + return; + } + + /* loop over the buffer */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = touchkit_get_pkt_len(buffer + pos); + + /* unknown packet: drop everything */ + if (unlikely(!pkt_len)) + return; + + /* full packet: process */ + if (likely(pkt_len <= buf_len)) { + touchkit_process_pkt(touchkit, regs, buffer + pos); + } else { + /* incomplete packet: save in buffer */ + memcpy(touchkit->buffer, buffer + pos, buf_len - pos); + touchkit->buf_len = buf_len - pos; + } + pos += pkt_len; + } +} + + static void touchkit_irq(struct urb *urb, struct pt_regs *regs) { struct touchkit_usb *touchkit = urb->context; int retval; - int x, y; switch (urb->status) { case 0: @@ -105,20 +222,7 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - if (swap_xy) { - y = TOUCHKIT_GET_X(touchkit->data); - x = TOUCHKIT_GET_Y(touchkit->data); - } else { - x = TOUCHKIT_GET_X(touchkit->data); - y = TOUCHKIT_GET_Y(touchkit->data); - } - - input_regs(touchkit->input, regs); - input_report_key(touchkit->input, BTN_TOUCH, - TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(touchkit->input, ABS_X, x); - input_report_abs(touchkit->input, ABS_Y, y); - input_sync(touchkit->input); + touchkit_process(touchkit, urb->actual_length, regs); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); -- cgit v1.2.3-70-g09d2 From bd39b7f195e5a780a3c6710eb1c1450f158a1f31 Mon Sep 17 00:00:00 2001 From: Chris Humbert Date: Mon, 28 Nov 2005 09:29:23 -0800 Subject: [PATCH] USB: don't allocate dma pools for PIO HCDs USB: don't allocate dma pools for PIO HCDs hcd_buffer_alloc() and hcd_buffer_free() have a similar dma_mask check and revert to kmalloc()/kfree(), but hcd_buffer_create() doesn't check dma_mask and allocates unused dma pools. Signed-off-by: Chris Humbert Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/buffer.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 419c9943a7c..ad742cec94f 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -55,6 +55,9 @@ int hcd_buffer_create (struct usb_hcd *hcd) char name [16]; int i, size; + if (!hcd->self.controller->dma_mask) + return 0; + for (i = 0; i < HCD_BUFFER_POOLS; i++) { if (!(size = pool_max [i])) continue; -- cgit v1.2.3-70-g09d2 From a21d4fed4b00eaf7e7c3b2e2b25de24f540bfa66 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:04:24 -0500 Subject: [PATCH] USB Gadget: file_storage: remove "volatile" declarations This patch (as612) removes the "volatile" declarations from the file-storage gadget. It turns out that they aren't needed for anything much; adding a few memory barriers does a sufficient job. The patch also removes a wait_queue. Not much point having a queue when only one task is ever going to be on it! Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 59 +++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index f6c49b717d3..0cea9782d7d 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -239,7 +239,6 @@ #include #include #include -#include #include #include @@ -251,7 +250,7 @@ #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" -#define DRIVER_VERSION "20 October 2004" +#define DRIVER_VERSION "28 November 2005" static const char longname[] = DRIVER_DESC; static const char shortname[] = DRIVER_NAME; @@ -588,7 +587,7 @@ enum fsg_buffer_state { struct fsg_buffhd { void *buf; dma_addr_t dma; - volatile enum fsg_buffer_state state; + enum fsg_buffer_state state; struct fsg_buffhd *next; /* The NetChip 2280 is faster, and handles some protocol faults @@ -597,9 +596,9 @@ struct fsg_buffhd { unsigned int bulk_out_intended_length; struct usb_request *inreq; - volatile int inreq_busy; + int inreq_busy; struct usb_request *outreq; - volatile int outreq_busy; + int outreq_busy; }; enum fsg_state { @@ -637,11 +636,11 @@ struct fsg_dev { struct usb_ep *ep0; // Handy copy of gadget->ep0 struct usb_request *ep0req; // For control responses - volatile unsigned int ep0_req_tag; + unsigned int ep0_req_tag; const char *ep0req_name; struct usb_request *intreq; // For interrupt responses - volatile int intreq_busy; + int intreq_busy; struct fsg_buffhd *intr_buffhd; unsigned int bulk_out_maxpacket; @@ -671,7 +670,6 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_drain; struct fsg_buffhd buffhds[NUM_BUFFERS]; - wait_queue_head_t thread_wqh; int thread_wakeup_needed; struct completion thread_notifier; struct task_struct *thread_task; @@ -1076,11 +1074,13 @@ static int populate_config_buf(struct usb_gadget *gadget, /* These routines may be called in process context or in_irq */ +/* Caller must hold fsg->lock */ static void wakeup_thread(struct fsg_dev *fsg) { /* Tell the main thread that something has happened */ fsg->thread_wakeup_needed = 1; - wake_up_all(&fsg->thread_wqh); + if (fsg->thread_task) + wake_up_process(fsg->thread_task); } @@ -1167,11 +1167,12 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); bh->inreq_busy = 0; bh->state = BUF_STATE_EMPTY; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) @@ -1188,11 +1189,12 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); bh->outreq_busy = 0; bh->state = BUF_STATE_FULL; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } @@ -1209,11 +1211,12 @@ static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) usb_ep_fifo_flush(ep); /* Hold the lock while we update the request and buffer states */ + smp_wmb(); spin_lock(&fsg->lock); fsg->intreq_busy = 0; bh->state = BUF_STATE_EMPTY; - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } #else @@ -1264,8 +1267,8 @@ static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) fsg->cbbuf_cmnd_size = req->actual; memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); - spin_unlock(&fsg->lock); wakeup_thread(fsg); + spin_unlock(&fsg->lock); } #else @@ -1517,8 +1520,8 @@ static int fsg_setup(struct usb_gadget *gadget, /* Use this for bulk or interrupt transfers, not ep0 */ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, - struct usb_request *req, volatile int *pbusy, - volatile enum fsg_buffer_state *state) + struct usb_request *req, int *pbusy, + enum fsg_buffer_state *state) { int rc; @@ -1526,8 +1529,11 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, dump_msg(fsg, "bulk-in", req->buf, req->length); else if (ep == fsg->intr_in) dump_msg(fsg, "intr-in", req->buf, req->length); + + spin_lock_irq(&fsg->lock); *pbusy = 1; *state = BUF_STATE_BUSY; + spin_unlock_irq(&fsg->lock); rc = usb_ep_queue(ep, req, GFP_KERNEL); if (rc != 0) { *pbusy = 0; @@ -1547,14 +1553,23 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, static int sleep_thread(struct fsg_dev *fsg) { - int rc; + int rc = 0; /* Wait until a signal arrives or we are woken up */ - rc = wait_event_interruptible(fsg->thread_wqh, - fsg->thread_wakeup_needed); + for (;;) { + try_to_freeze(); + set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + rc = -EINTR; + break; + } + if (fsg->thread_wakeup_needed) + break; + schedule(); + } + __set_current_state(TASK_RUNNING); fsg->thread_wakeup_needed = 0; - try_to_freeze(); - return (rc ? -EINTR : 0); + return rc; } @@ -1791,6 +1806,7 @@ static int do_write(struct fsg_dev *fsg) if (bh->state == BUF_STATE_EMPTY && !get_some_more) break; // We stopped early if (bh->state == BUF_STATE_FULL) { + smp_rmb(); fsg->next_buffhd_to_drain = bh->next; bh->state = BUF_STATE_EMPTY; @@ -2359,6 +2375,7 @@ static int throw_away_data(struct fsg_dev *fsg) /* Throw away the data in a filled buffer */ if (bh->state == BUF_STATE_FULL) { + smp_rmb(); bh->state = BUF_STATE_EMPTY; fsg->next_buffhd_to_drain = bh->next; @@ -3024,6 +3041,7 @@ static int get_next_command(struct fsg_dev *fsg) if ((rc = sleep_thread(fsg)) != 0) return rc; } + smp_rmb(); rc = received_cbw(fsg, bh); bh->state = BUF_STATE_EMPTY; @@ -4072,7 +4090,6 @@ static int __init fsg_alloc(void) spin_lock_init(&fsg->lock); init_rwsem(&fsg->filesem); kref_init(&fsg->ref); - init_waitqueue_head(&fsg->thread_wqh); init_completion(&fsg->thread_notifier); the_fsg = fsg; -- cgit v1.2.3-70-g09d2 From 3cf0a22e8b1b3f44288db773d315e72e89d51c4c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:08:15 -0500 Subject: [PATCH] USB Gadget: dummy_hcd: updates to hcd->state This patch (as613) moves the updates to hcd->state in the dummy_hcd driver to where they now belong. It also uses the new HC_FLAG_HW_ACCESSIBLE flag in a way that simulates a real PCI controller, and it adds checks for attempts to resume the bus while the controller is suspended or to suspend the controller while the bus is active. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 43 ++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4932b07b316..ce0d4b412df 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1576,7 +1576,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); - if (hcd->state != HC_STATE_RUNNING) + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) goto done; if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) { @@ -1623,7 +1623,7 @@ static int dummy_hub_control ( int retval = 0; unsigned long flags; - if (hcd->state != HC_STATE_RUNNING) + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) return -ETIMEDOUT; dum = hcd_to_dummy (hcd); @@ -1756,9 +1756,12 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); + spin_lock_irq (&dum->lock); dum->rh_state = DUMMY_RH_SUSPENDED; set_link_state (dum); + hcd->state = HC_STATE_SUSPENDED; spin_unlock_irq (&dum->lock); return 0; } @@ -1766,14 +1769,23 @@ static int dummy_bus_suspend (struct usb_hcd *hcd) static int dummy_bus_resume (struct usb_hcd *hcd) { struct dummy *dum = hcd_to_dummy (hcd); + int rc = 0; + + dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__); spin_lock_irq (&dum->lock); - dum->rh_state = DUMMY_RH_RUNNING; - set_link_state (dum); - if (!list_empty(&dum->urbp_list)) - mod_timer (&dum->timer, jiffies); + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + dev_warn (&hcd->self.root_hub->dev, "HC isn't running!\n"); + rc = -ENODEV; + } else { + dum->rh_state = DUMMY_RH_RUNNING; + set_link_state (dum); + if (!list_empty(&dum->urbp_list)) + mod_timer (&dum->timer, jiffies); + hcd->state = HC_STATE_RUNNING; + } spin_unlock_irq (&dum->lock); - return 0; + return rc; } /*-------------------------------------------------------------------------*/ @@ -1933,12 +1945,19 @@ static int dummy_hcd_remove (struct platform_device *pdev) static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd; + struct dummy *dum; + int rc = 0; dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (pdev); - hcd->state = HC_STATE_SUSPENDED; - return 0; + hcd = platform_get_drvdata (pdev); + dum = hcd_to_dummy (hcd); + if (dum->rh_state == DUMMY_RH_RUNNING) { + dev_warn(&pdev->dev, "Root hub isn't suspended!\n"); + rc = -EBUSY; + } else + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + return rc; } static int dummy_hcd_resume (struct platform_device *pdev) @@ -1946,9 +1965,9 @@ static int dummy_hcd_resume (struct platform_device *pdev) struct usb_hcd *hcd; dev_dbg (&pdev->dev, "%s\n", __FUNCTION__); - hcd = platform_get_drvdata (pdev); - hcd->state = HC_STATE_RUNNING; + hcd = platform_get_drvdata (pdev); + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); usb_hcd_poll_rh_status (hcd); return 0; } -- cgit v1.2.3-70-g09d2 From 2425e9fe67cb5e66c173c4f604ddd8a5970d89e9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 29 Nov 2005 12:13:31 -0500 Subject: [PATCH] USB: Don't assume root-hub resume succeeds This patch (as614) makes a small change to the part of the hub driver responsible for remote wakeup of root hubs. When these wakeups occur the driver is suspended, and in case the resume fails the driver should remain suspended -- it shouldn't try to proceed with its normal processing. This will hardly ever matter in normal use, but it did crop up while I was debugging a different problem. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a523c8f20b5..650d5ee5871 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2697,6 +2697,8 @@ static void hub_events(void) if (i) { dpm_runtime_resume(&hdev->dev); dpm_runtime_resume(&intf->dev); + usb_put_intf(intf); + continue; } /* Lock the device, then check to see if we were -- cgit v1.2.3-70-g09d2 From 9fe6fcd8ccb2c8c661dfd1e07e3122aef31a67d4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Nov 2005 14:01:55 +0100 Subject: [PATCH] USB: drivers/usb/misc/sisusbvga/sisusb.c: remove dead code The Coverity checker found this dead code. Signed-off-by: Adrian Bunk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 44350d49ad0..1ced113ccb5 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -863,9 +863,6 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, switch (length) { - case 0: - return ret; - case 1: if (userbuffer) { if (get_user(swap8, (u8 __user *)userbuffer)) @@ -1221,9 +1218,6 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, switch (length) { - case 0: - return ret; - case 1: ret |= sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, -- cgit v1.2.3-70-g09d2 From 4c4c9432a6c916729c7296c47fe93b053a73e20c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 29 Nov 2005 09:43:42 +0100 Subject: [PATCH] USB: mark various usb tables const patch below marks various USB tables and variables as const so that they end up in .rodata section and don't cacheline share with things that get written to. For the non-array variables it also allows gcc to optimize more. Signed-off-by: Arjan van de Ven Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 4 ++-- drivers/usb/class/usblp.c | 4 ++-- drivers/usb/core/devices.c | 20 ++++++++++---------- drivers/usb/host/uhci-debug.c | 2 +- drivers/usb/input/aiptek.c | 2 +- drivers/usb/input/ati_remote.c | 4 ++-- drivers/usb/input/fixp-arith.h | 2 +- drivers/usb/input/hid-core.c | 2 +- drivers/usb/input/hid-input.c | 4 ++-- drivers/usb/input/keyspan_remote.c | 2 +- drivers/usb/input/xpad.c | 6 +++--- drivers/usb/media/konicawc.c | 6 +++--- drivers/usb/media/ov511.c | 2 +- drivers/usb/media/pwc/pwc-ctrl.c | 2 +- drivers/usb/media/stv680.h | 6 +++--- drivers/usb/media/usbvideo.c | 2 +- drivers/usb/misc/sisusbvga/sisusb.c | 4 ++-- drivers/usb/serial/ftdi_sio.c | 2 +- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_fw_boot2.h | 2 +- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/storage/sddr09.c | 2 +- drivers/usb/storage/usb.c | 2 +- 23 files changed, 43 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 93de121f52a..248279e44c9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -658,7 +658,7 @@ static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int return -ENOIOCTLCMD; } -static __u32 acm_tty_speed[] = { +static const __u32 acm_tty_speed[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000, 576000, @@ -666,7 +666,7 @@ static __u32 acm_tty_speed[] = { 2500000, 3000000, 3500000, 4000000 }; -static __u8 acm_tty_size[] = { +static const __u8 acm_tty_size[] = { 5, 6, 7, 8 }; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 10406b857ac..6918037e209 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -199,7 +199,7 @@ struct quirk_printer_struct { #define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */ #define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */ -static struct quirk_printer_struct quirk_printers[] = { +static const struct quirk_printer_struct quirk_printers[] = { { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */ { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */ { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */ @@ -301,7 +301,7 @@ static void usblp_bulk_write(struct urb *urb, struct pt_regs *regs) * Get and print printer errors. */ -static char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; +static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" }; static int usblp_check_status(struct usblp *usblp, int err) { diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 55bc563a325..2684e15b813 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -67,45 +67,45 @@ /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */ #define ALLOW_SERIAL_NUMBER -static char *format_topo = +static const char *format_topo = /* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */ "\nT: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n"; -static char *format_string_manufacturer = +static const char *format_string_manufacturer = /* S: Manufacturer=xxxx */ "S: Manufacturer=%.100s\n"; -static char *format_string_product = +static const char *format_string_product = /* S: Product=xxxx */ "S: Product=%.100s\n"; #ifdef ALLOW_SERIAL_NUMBER -static char *format_string_serialnumber = +static const char *format_string_serialnumber = /* S: SerialNumber=xxxx */ "S: SerialNumber=%.100s\n"; #endif -static char *format_bandwidth = +static const char *format_bandwidth = /* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */ "B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n"; -static char *format_device1 = +static const char *format_device1 = /* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */ "D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n"; -static char *format_device2 = +static const char *format_device2 = /* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */ "P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n"; -static char *format_config = +static const char *format_config = /* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */ "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n"; -static char *format_iface = +static const char *format_iface = /* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/ "I: If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n"; -static char *format_endpt = +static const char *format_endpt = /* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 151154df37f..cab02e15bfe 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -197,7 +197,7 @@ out: } #ifdef CONFIG_PROC_FS -static const char *qh_names[] = { +static const char * const qh_names[] = { "skel_int128_qh", "skel_int64_qh", "skel_int32_qh", "skel_int16_qh", "skel_int8_qh", "skel_int4_qh", diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 356284c746a..87ae08c99bc 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -338,7 +338,7 @@ struct aiptek { * the bitmap which comes from the tablet. This hides the * issue that the F_keys are not sequentially numbered. */ -static int macroKeyEvents[] = { +static const int macroKeyEvents[] = { KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 8948e5c3941..b78a4d81b0a 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -146,7 +146,7 @@ static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; /* Acceleration curve for directional control pad */ -static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; +static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; /* Duplicate event filtering time. * Sequential, identical KIND_FILTERED inputs with less than @@ -197,7 +197,7 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct { +static const struct { short kind; unsigned char data1, data2; int type; diff --git a/drivers/usb/input/fixp-arith.h b/drivers/usb/input/fixp-arith.h index 26ca5b890a6..b44d398de07 100644 --- a/drivers/usb/input/fixp-arith.h +++ b/drivers/usb/input/fixp-arith.h @@ -38,7 +38,7 @@ typedef s16 fixp_t; #define FRAC_MASK ((1<lock is down */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 857fe791d70..11da073da17 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -491,7 +491,7 @@ static struct usb_driver ftdi_driver = { .no_dynamic_id = 1, }; -static char *ftdi_chip_name[] = { +static const char *ftdi_chip_name[] = { [SIO] = "SIO", /* the serial part of FT8U100AX */ [FT8U232AM] = "FT8U232AM", [FT232BM] = "FT232BM", diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 4e2b599d85a..89bb3563c91 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -184,7 +184,7 @@ struct divisor_table_entry { // These assume a 3.6864MHz crystal, the standard /16, and // MCR.7 = 0. // -static struct divisor_table_entry divisor_table[] = { +static const struct divisor_table_entry divisor_table[] = { { 50, 4608}, { 75, 3072}, { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ diff --git a/drivers/usb/serial/io_fw_boot2.h b/drivers/usb/serial/io_fw_boot2.h index c7c3a3c305f..e3463de99de 100644 --- a/drivers/usb/serial/io_fw_boot2.h +++ b/drivers/usb/serial/io_fw_boot2.h @@ -537,7 +537,7 @@ static unsigned char IMAGE_ARRAY_NAME[] = { }; -static struct edge_firmware_version_info IMAGE_VERSION_NAME = { +static const struct edge_firmware_version_info IMAGE_VERSION_NAME = { 2, 0, 3 }; // Major, Minor, Build #undef IMAGE_VERSION_NAME diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 3ea284ce7b8..86dc21c728a 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -167,7 +167,7 @@ static struct usb_driver safe_driver = { .no_dynamic_id = 1, }; -static __u16 crc10_table[256] = { +static const __u16 crc10_table[256] = { 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, 0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf, 0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c, diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 0ea2f5ab66b..0a6efae452f 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -237,7 +237,7 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { #define SPARE 0xfffffffe #define UNUSABLE 0xfffffffd -static int erase_bad_lba_entries = 0; +static const int erase_bad_lba_entries = 0; /* send vendor interface command (0x41) */ /* called for requests 0, 1, 8 */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 484ed297bed..356f471ba83 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -470,7 +470,7 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) * from the unusual_devs.h table. */ if (id->idVendor || id->idProduct) { - static char *msgs[3] = { + static const char *msgs[3] = { "an unneeded SubClass entry", "an unneeded Protocol entry", "unneeded SubClass and Protocol entries"}; -- cgit v1.2.3-70-g09d2 From a5e36d20897ff8317e722fceb4d9eea3e4a5906b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 28 Nov 2005 22:15:46 +0000 Subject: [PATCH] USB: Correct ohci-pxa27x suspend/resume struct confusion The device data in ohci-pxa27x is a struct hcd, not a struct ohci_hcd. This correct the suspend/resume calls to account for this and adds some code to invalidate the platform data when the module is removed. Signed-off-by: Richard Purdie Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 3b1cfe93948..acde8868da2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -309,20 +309,22 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_pxa27x_remove(hcd, pdev); + platform_set_drvdata(pdev, NULL); return 0; } #ifdef CONFIG_PM static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state) { - struct ohci_hcd *ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); if (time_before(jiffies, ohci->next_statechange)) msleep(5); ohci->next_statechange = jiffies; pxa27x_stop_hc(&pdev->dev); - ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; + hcd->state = HC_STATE_SUSPENDED; pdev->dev.power.power_state = PMSG_SUSPEND; return 0; @@ -330,7 +332,8 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) { - struct ohci_hcd *ohci = platform_get_drvdata(pdev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); int status; if (time_before(jiffies, ohci->next_statechange)) @@ -341,7 +344,7 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) return status; pdev->dev.power.power_state = PMSG_ON; - usb_hcd_resume_root_hub(platform_get_drvdata(pdev)); + usb_hcd_resume_root_hub(hcd); return 0; } -- cgit v1.2.3-70-g09d2 From 17fa6e552f2fc6bb06af767b0abf9cb642e13404 Mon Sep 17 00:00:00 2001 From: fabien COSSE Date: Wed, 30 Nov 2005 01:16:00 -0800 Subject: [PATCH] USB Storage: add unusual_devs entry for NIKON Coolpix 2000 This patch adds an unusual_devs.h entry for NIKON Coolpix 2000 camera wich cause error: "Not Ready: Medium not present" Works fine with th patched kernel... Here are the informations in /proc/bus/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04b0 ProdID=0301 Rev= 0.10 S: Manufacturer=NIKON S: Product=NIKON DSC E2000 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms Signed-off-by: Fabien COSSE Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 76904ad1124..100f53c2097 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -187,6 +187,14 @@ UNUSUAL_DEV( 0x04b0, 0x0405, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Patch for Nikon coolpix 2000 + * Submitted by Fabien Cosse */ +UNUSUAL_DEV( 0x04b0, 0x0301, 0x0010, 0x0010, + "NIKON", + "NIKON DSC E2000", + US_SC_DEVICE, US_PR_DEVICE,NULL, + US_FL_NOT_LOCKABLE ), + /* BENQ DC5330 * Reported by Manuel Fombuena and * Frank Copeland */ -- cgit v1.2.3-70-g09d2 From 95f209f93663103db2a8fb989e226ac68a98b036 Mon Sep 17 00:00:00 2001 From: Horst Schirmeier Date: Thu, 28 Jul 2005 15:32:20 +0200 Subject: [PATCH] USB: pl2303_update_line_status data length fix Minimum data length must be UART_STATE + 1, as data[UART_STATE] is being accessed for the new line_state. Although PL-2303 hardware is not expected to send data with exactly UART_STATE length, this keeps it on the safe side. Signed-off-by: Horst Schirmeier Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c96ba9fc19e..f0372105619 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -810,7 +810,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 status_idx = UART_STATE; - u8 length = UART_STATE; + u8 length = UART_STATE + 1; if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || -- cgit v1.2.3-70-g09d2 From f0b80fbf294bc4f6ec179b09fd5b63df25188259 Mon Sep 17 00:00:00 2001 From: Marcelo Feitoza Parisi Date: Thu, 1 Dec 2005 00:50:39 +0300 Subject: [PATCH] USB: ati_remote: use time_before() and friends They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi Signed-off-by: Alexey Dobriyan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/ati_remote.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index b78a4d81b0a..f7bdc506e61 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -96,6 +96,7 @@ #include #include #include +#include /* * Module and Version Information, Module Parameters @@ -471,7 +472,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Filter duplicate events which happen "too close" together. */ if ((ati_remote->old_data[0] == data[1]) && (ati_remote->old_data[1] == data[2]) && - ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) { + time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; @@ -506,16 +507,16 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) * pad down, so we increase acceleration, ramping up over two seconds to * a maximum speed. The acceleration curve is #defined above. */ - if ((jiffies - ati_remote->old_jiffies) > (HZ >> 2)) { + if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { acc = 1; ati_remote->acc_jiffies = jiffies; } - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = accel[0]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = accel[1]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = accel[2]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = accel[3]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = accel[4]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = accel[5]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; else acc = accel[6]; input_regs(dev, regs); -- cgit v1.2.3-70-g09d2 From fa3465689f93331834a831bbe98e3863701e1068 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 30 Nov 2005 11:57:51 -0500 Subject: [PATCH] USB: UHCI: change uhci_explen macro This patch (as616) changed the uhci_explen macro in uhci-hcd.h so that it now accepts the desired length, rather than length - 1 with special handling for 0. This also fixes a minor bug that would show up only when a driver submits a 0-length bulk URB. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hcd.c | 2 +- drivers/usb/host/uhci-hcd.h | 8 ++++---- drivers/usb/host/uhci-q.c | 12 ++++++------ 3 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 071fab6b647..120ca64fe3f 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -566,7 +566,7 @@ static int uhci_start(struct usb_hcd *hcd) uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH; /* This dummy TD is to work around a bug in Intel PIIX controllers */ - uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) | + uhci_fill_td(uhci->term_td, 0, uhci_explen(0) | (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0); uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle); diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index e576db57a92..e43282e4e80 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -71,8 +71,6 @@ #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ -#define UHCI_NULL_DATA_SIZE 0x7FF /* for UHCI controller TD */ - #define UHCI_PTR_BITS cpu_to_le32(0x000F) #define UHCI_PTR_TERM cpu_to_le32(0x0001) #define UHCI_PTR_QH cpu_to_le32(0x0002) @@ -168,9 +166,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) { #define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n - 1 */ #define TD_TOKEN_PID_MASK 0xFF -#define uhci_explen(len) ((len) << TD_TOKEN_EXPLEN_SHIFT) +#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \ + TD_TOKEN_EXPLEN_SHIFT) -#define uhci_expected_length(token) ((((token) >> 21) + 1) & TD_TOKEN_EXPLEN_MASK) +#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \ + 1) & TD_TOKEN_EXPLEN_MASK) #define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1) #define uhci_endpoint(token) (((token) >> 15) & 0xf) #define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f) diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 7e46887d9e1..ace9d15f85d 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -596,7 +596,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(7), + uhci_fill_td(td, status, destination | uhci_explen(8), urb->setup_dma); /* @@ -628,7 +628,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur destination ^= TD_TOKEN_TOGGLE; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1), + uhci_fill_td(td, status, destination | uhci_explen(pktsze), data); data += pktsze; @@ -658,7 +658,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur uhci_add_td_to_urb(urb, td); uhci_fill_td(td, status | TD_CTRL_IOC, - destination | uhci_explen(UHCI_NULL_DATA_SIZE), 0); + destination | uhci_explen(0), 0); qh = uhci_alloc_qh(uhci); if (!qh) @@ -864,7 +864,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(pktsze - 1) | + uhci_fill_td(td, status, destination | uhci_explen(pktsze) | (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), data); @@ -890,7 +890,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(UHCI_NULL_DATA_SIZE) | + uhci_fill_td(td, status, destination | uhci_explen(0) | (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)) << TD_TOKEN_TOGGLE_SHIFT), data); @@ -1092,7 +1092,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb) return -ENOMEM; uhci_add_td_to_urb(urb, td); - uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length - 1), + uhci_fill_td(td, status, destination | uhci_explen(urb->iso_frame_desc[i].length), urb->transfer_dma + urb->iso_frame_desc[i].offset); if (i + 1 >= urb->number_of_packets) -- cgit v1.2.3-70-g09d2 From 687f5f3428157bea4940dd967fd7b4e59c1b13b4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 30 Nov 2005 17:16:19 -0500 Subject: [PATCH] USB: UHCI: edit some comments This patch (as615b) edits a large number of comments in the uhci-hcd code, mainly removing excess apostrophes. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 12 ++++++------ drivers/usb/host/uhci-hcd.c | 17 +++++++++-------- drivers/usb/host/uhci-hcd.h | 24 ++++++++++++------------ drivers/usb/host/uhci-q.c | 18 +++++++++--------- 4 files changed, 36 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index cab02e15bfe..5832953086f 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -2,8 +2,8 @@ * UHCI-specific debugging code. Invaluable when something * goes wrong, but don't get in my face. * - * Kernel visible pointers are surrounded in []'s and bus - * visible pointers are surrounded in ()'s + * Kernel visible pointers are surrounded in []s and bus + * visible pointers are surrounded in ()s * * (C) Copyright 1999 Linus Torvalds * (C) Copyright 1999-2001 Johannes Erdfelt @@ -19,7 +19,7 @@ static struct dentry *uhci_debugfs_root = NULL; -/* Handle REALLY large printk's so we don't overflow buffers */ +/* Handle REALLY large printks so we don't overflow buffers */ static inline void lprintk(char *buf) { char *p; @@ -160,7 +160,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) } if (active && ni > i) { - out += sprintf(out, "%*s[skipped %d active TD's]\n", space, "", ni - i); + out += sprintf(out, "%*s[skipped %d active TDs]\n", space, "", ni - i); tmp = ntmp; td = ntd; i = ni; @@ -173,7 +173,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space) if (list_empty(&urbp->queue_list) || urbp->queued) goto out; - out += sprintf(out, "%*sQueued QH's:\n", -space, "--"); + out += sprintf(out, "%*sQueued QHs:\n", -space, "--"); head = &urbp->queue_list; tmp = head->next; @@ -464,7 +464,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) } while (tmp != head); } - out += sprintf(out, "Skeleton QH's\n"); + out += sprintf(out, "Skeleton QHs\n"); for (i = 0; i < UHCI_NUM_SKELQH; ++i) { int shown = 0; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 120ca64fe3f..dfe121d3588 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -62,10 +62,10 @@ Alan Stern" /* * debug = 0, no debugging messages - * debug = 1, dump failed URB's except for stalls - * debug = 2, dump all failed URB's (including stalls) + * debug = 1, dump failed URBs except for stalls + * debug = 2, dump all failed URBs (including stalls) * show all queues in /debug/uhci/[pci_addr] - * debug = 3, show all TD's in URB's when dumping + * debug = 3, show all TDs in URBs when dumping */ #ifdef DEBUG static int debug = 1; @@ -88,7 +88,7 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci); #define FSBR_DELAY msecs_to_jiffies(50) /* When we timeout an idle transfer for FSBR, we'll switch it over to */ -/* depth first traversal. We'll do it in groups of this number of TD's */ +/* depth first traversal. We'll do it in groups of this number of TDs */ /* to make sure it doesn't hog all of the bandwidth */ #define DEPTH_INTERVAL 5 @@ -728,8 +728,9 @@ static int uhci_resume(struct usb_hcd *hcd) dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__); - /* We aren't in D3 state anymore, we do that even if dead as I - * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0 + /* Since we aren't in D3 any more, it's safe to set this flag + * even if the controller was dead. It might not even be dead + * any more, if the firmware or quirks code has reset it. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); mb(); @@ -879,7 +880,7 @@ static int __init uhci_hcd_init(void) init_failed: if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_priv's were freed!"); + warn("not all urb_privs were freed!"); up_failed: debugfs_remove(uhci_debugfs_root); @@ -897,7 +898,7 @@ static void __exit uhci_hcd_cleanup(void) pci_unregister_driver(&uhci_pci_driver); if (kmem_cache_destroy(uhci_up_cachep)) - warn("not all urb_priv's were freed!"); + warn("not all urb_privs were freed!"); debugfs_remove(uhci_debugfs_root); kfree(errbuf); diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index e43282e4e80..8b4b887a7d4 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -223,10 +223,10 @@ static u32 inline td_status(struct uhci_td *td) { */ /* - * The UHCI driver places Interrupt, Control and Bulk into QH's both - * to group together TD's for one transfer, and also to faciliate queuing - * of URB's. To make it easy to insert entries into the schedule, we have - * a skeleton of QH's for each predefined Interrupt latency, low-speed + * The UHCI driver places Interrupt, Control and Bulk into QHs both + * to group together TDs for one transfer, and also to facilitate queuing + * of URBs. To make it easy to insert entries into the schedule, we have + * a skeleton of QHs for each predefined Interrupt latency, low-speed * control, full-speed control and terminating QH (see explanation for * the terminating QH below). * @@ -257,8 +257,8 @@ static u32 inline td_status(struct uhci_td *td) { * reclamation. * * Isochronous transfers are stored before the start of the skeleton - * schedule and don't use QH's. While the UHCI spec doesn't forbid the - * use of QH's for Isochronous, it doesn't use them either. And the spec + * schedule and don't use QHs. While the UHCI spec doesn't forbid the + * use of QHs for Isochronous, it doesn't use them either. And the spec * says that queues never advance on an error completion status, which * makes them totally unsuitable for Isochronous transfers. */ @@ -359,7 +359,7 @@ struct uhci_hcd { struct dma_pool *td_pool; struct uhci_td *term_td; /* Terminating TD, see UHCI bug */ - struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ + struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */ spinlock_t lock; @@ -389,22 +389,22 @@ struct uhci_hcd { unsigned long resuming_ports; unsigned long ports_timeout; /* Time to stop signalling */ - /* Main list of URB's currently controlled by this HC */ + /* Main list of URBs currently controlled by this HC */ struct list_head urb_list; - /* List of QH's that are done, but waiting to be unlinked (race) */ + /* List of QHs that are done, but waiting to be unlinked (race) */ struct list_head qh_remove_list; unsigned int qh_remove_age; /* Age in frames */ - /* List of TD's that are done, but waiting to be freed (race) */ + /* List of TDs that are done, but waiting to be freed (race) */ struct list_head td_remove_list; unsigned int td_remove_age; /* Age in frames */ - /* List of asynchronously unlinked URB's */ + /* List of asynchronously unlinked URBs */ struct list_head urb_remove_list; unsigned int urb_remove_age; /* Age in frames */ - /* List of URB's awaiting completion callback */ + /* List of URBs awaiting completion callback */ struct list_head complete_list; int rh_numports; /* Number of root-hub ports */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index ace9d15f85d..b6076004a43 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -80,7 +80,7 @@ static inline void uhci_fill_td(struct uhci_td *td, u32 status, } /* - * We insert Isochronous URB's directly into the frame list at the beginning + * We insert Isochronous URBs directly into the frame list at the beginning */ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td, unsigned framenum) { @@ -369,7 +369,7 @@ static void uhci_append_queued_urb(struct uhci_hcd *uhci, struct urb *eurb, stru uhci_fixup_toggle(urb, uhci_toggle(td_token(lltd)) ^ 1)); - /* All qh's in the queue need to link to the next queue */ + /* All qhs in the queue need to link to the next queue */ urbp->qh->link = eurbp->qh->link; wmb(); /* Make sure we flush everything */ @@ -502,7 +502,7 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb) } /* Check to see if the remove list is empty. Set the IOC bit */ - /* to force an interrupt so we can remove the TD's*/ + /* to force an interrupt so we can remove the TDs*/ if (list_empty(&uhci->td_remove_list)) uhci_set_next_interrupt(uhci); @@ -612,7 +612,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, struct ur } /* - * Build the DATA TD's + * Build the DATA TDs */ while (len > 0) { int pktsze = len; @@ -744,7 +744,7 @@ static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb) urb->actual_length = 0; - /* The rest of the TD's (but the last) are data */ + /* The rest of the TDs (but the last) are data */ tmp = tmp->next; while (tmp != head && tmp->next != head) { unsigned int ctrlstat; @@ -848,7 +848,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, struct urb status |= TD_CTRL_SPD; /* - * Build the DATA TD's + * Build the DATA TDs */ do { /* Allow zero length packets */ int pktsze = maxsze; @@ -1025,7 +1025,7 @@ static int isochronous_find_limits(struct uhci_hcd *uhci, struct urb *urb, unsig list_for_each_entry(up, &uhci->urb_list, urb_list) { struct urb *u = up->urb; - /* look for pending URB's with identical pipe handle */ + /* look for pending URBs with identical pipe handle */ if ((urb->pipe == u->pipe) && (urb->dev == u->dev) && (u->status == -EINPROGRESS) && (u != urb)) { if (!last_urb) @@ -1355,7 +1355,7 @@ static void uhci_unlink_generic(struct uhci_hcd *uhci, struct urb *urb) uhci_delete_queued_urb(uhci, urb); - /* The interrupt loop will reclaim the QH's */ + /* The interrupt loop will reclaim the QHs */ uhci_remove_qh(uhci, urbp->qh); urbp->qh = NULL; } @@ -1413,7 +1413,7 @@ static int uhci_fsbr_timeout(struct uhci_hcd *uhci, struct urb *urb) list_for_each_entry(td, head, list) { /* * Make sure we don't do the last one (since it'll have the - * TERM bit set) as well as we skip every so many TD's to + * TERM bit set) as well as we skip every so many TDs to * make sure it doesn't hog the bandwidth */ if (td->list.next != head && (count % DEPTH_INTERVAL) == -- cgit v1.2.3-70-g09d2 From b9b09422570e5e35a9f590a1ead63e711aefac8c Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 3 Dec 2005 21:52:10 -0800 Subject: [PATCH] USB: Let usbmon collect less garbage Alan Stern pointed out that (in 2.6 kernel) one successful submission results in one callback, even for ISO-out transfers. Thus, the silly check can be removed from usbmon. This reduces the amount of garbage printed in case of ISO and Interrupt transfers. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_text.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 17d0190ef64..611612146ae 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -97,19 +97,12 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, if (len >= DATA_MAX) len = DATA_MAX; - /* - * Bulk is easy to shortcut reliably. - * XXX Other pipe types need consideration. Currently, we overdo it - * and collect garbage for them: better more than less. - */ - if (usb_pipebulk(pipe) || usb_pipecontrol(pipe)) { - if (usb_pipein(pipe)) { - if (ev_type == 'S') - return '<'; - } else { - if (ev_type == 'C') - return '>'; - } + if (usb_pipein(pipe)) { + if (ev_type == 'S') + return '<'; + } else { + if (ev_type == 'C') + return '>'; } /* -- cgit v1.2.3-70-g09d2 From 7931e1c6f8007d5fef8a0bb2dc71bd97315eeae9 Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:56:51 -0800 Subject: [PATCH] USB Storage: make OneTouch PM-aware The OneTouch subdriver submits its own interrupt URB for notifications about button presses. Consequently it needs to know about suspend and resume events, so it can cancel or restart the URB. This patch (as593) adds a hook to struct us_data, to be used for notifying subdrivers about Power Management events, and it implements the hook in the OneTouch driver. Signed-off-by: Alan Stern Signed-off-by: Nick Sillik Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/onetouch.c | 27 +++++++++++++++++++++++++++ drivers/usb/storage/usb.c | 4 ++++ drivers/usb/storage/usb.h | 9 ++++++++- 3 files changed, 39 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 89401a59f95..55ee2d36d58 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -52,6 +52,7 @@ struct usb_onetouch { struct urb *irq; /* urb for interrupt in report */ unsigned char *data; /* input data */ dma_addr_t data_dma; + unsigned int is_open:1; }; static void usb_onetouch_irq(struct urb *urb, struct pt_regs *regs) @@ -89,6 +90,7 @@ static int usb_onetouch_open(struct input_dev *dev) { struct usb_onetouch *onetouch = dev->private; + onetouch->is_open = 1; onetouch->irq->dev = onetouch->udev; if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) { err("usb_submit_urb failed"); @@ -103,8 +105,30 @@ static void usb_onetouch_close(struct input_dev *dev) struct usb_onetouch *onetouch = dev->private; usb_kill_urb(onetouch->irq); + onetouch->is_open = 0; } +#ifdef CONFIG_PM +static void usb_onetouch_pm_hook(struct us_data *us, int action) +{ + struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra; + + if (onetouch->is_open) { + switch (action) { + case US_SUSPEND: + usb_kill_urb(onetouch->irq); + break; + case US_RESUME: + if (usb_submit_urb(onetouch->irq, GFP_KERNEL) != 0) + err("usb_submit_urb failed"); + break; + default: + break; + } + } +} +#endif /* CONFIG_PM */ + int onetouch_connect_input(struct us_data *ss) { struct usb_device *udev = ss->pusb_dev; @@ -185,6 +209,9 @@ int onetouch_connect_input(struct us_data *ss) ss->extra_destructor = onetouch_release_input; ss->extra = onetouch; +#ifdef CONFIG_PM + ss->suspend_resume_hook = usb_onetouch_pm_hook; +#endif input_register_device(onetouch->dev); diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 356f471ba83..ca02ae97be8 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -188,6 +188,8 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) down(&us->dev_semaphore); US_DEBUGP("%s\n", __FUNCTION__); + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_SUSPEND); iface->dev.power.power_state.event = message.event; /* When runtime PM is working, we'll set a flag to indicate @@ -204,6 +206,8 @@ static int storage_resume(struct usb_interface *iface) down(&us->dev_semaphore); US_DEBUGP("%s\n", __FUNCTION__); + if (us->suspend_resume_hook) + (us->suspend_resume_hook)(us, US_RESUME); iface->dev.power.power_state.event = PM_EVENT_ON; up(&us->dev_semaphore); diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 0cd1eebc449..7259fd1f6b0 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -93,7 +93,11 @@ struct us_unusual_dev { typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*); typedef int (*trans_reset)(struct us_data*); typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*); -typedef void (*extra_data_destructor)(void *); /* extra data destructor */ +typedef void (*extra_data_destructor)(void *); /* extra data destructor */ +typedef void (*pm_hook)(struct us_data *, int); /* power management hook */ + +#define US_SUSPEND 0 +#define US_RESUME 1 /* we allocate one of these for every device that we remember */ struct us_data { @@ -149,6 +153,9 @@ struct us_data { /* subdriver information */ void *extra; /* Any extra data */ extra_data_destructor extra_destructor;/* extra data destructor */ +#ifdef CONFIG_PM + pm_hook suspend_resume_hook; +#endif }; /* Convert between us_data and the corresponding Scsi_Host */ -- cgit v1.2.3-70-g09d2 From f5b8cb9c91f2f7d54dc3f066db8d4e0f041de79b Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:57:51 -0800 Subject: [PATCH] USB Storage: cleanups of sddr09 This is the first of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as594) straightens out the initialization procedures and headers: Some ugly code from usb.c was moved into sddr09.c. Set-up of the private data structures was moved into the initialization routine. The connection between the "dpcm" version and the standalone version was clarified. A private declaration was moved from a header file into the subdriver's .c file. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/initializers.h | 4 --- drivers/usb/storage/sddr09.c | 72 +++++++++++++++++++++++++++++--------- drivers/usb/storage/sddr09.h | 15 ++------ drivers/usb/storage/unusual_devs.h | 14 ++++---- drivers/usb/storage/usb.c | 22 ------------ 5 files changed, 64 insertions(+), 63 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h index 7372386f33d..4c1b2bd2e2e 100644 --- a/drivers/usb/storage/initializers.h +++ b/drivers/usb/storage/initializers.h @@ -45,10 +45,6 @@ * mode */ int usb_stor_euscsi_init(struct us_data *us); -#ifdef CONFIG_USB_STORAGE_SDDR09 -int sddr09_init(struct us_data *us); -#endif - /* This function is required to activate all four slots on the UCR-61S2B * flash reader */ int usb_stor_ucr61s2b_init(struct us_data *us); diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 0a6efae452f..6c379b6b43d 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -214,6 +214,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) { * The actual driver starts here. */ +struct sddr09_card_info { + unsigned long capacity; /* Size of card in bytes */ + int pagesize; /* Size of page in bytes */ + int pageshift; /* log2 of pagesize */ + int blocksize; /* Size of block in pages */ + int blockshift; /* log2 of blocksize */ + int blockmask; /* 2^blockshift - 1 */ + int *lba_to_pba; /* logical to physical map */ + int *pba_to_lba; /* physical to logical map */ + int lbact; /* number of available pages */ + int flags; +#define SDDR09_WP 1 /* write protected */ +}; + /* * On my 16MB card, control blocks have size 64 (16 real control bytes, * and 48 junk bytes). In reality of course the card uses 16 control bytes, @@ -1342,27 +1356,51 @@ sddr09_card_info_destructor(void *extra) { kfree(info->pba_to_lba); } -static void -sddr09_init_card_info(struct us_data *us) { - if (!us->extra) { - us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO); - if (us->extra) { - memset(us->extra, 0, sizeof(struct sddr09_card_info)); - us->extra_destructor = sddr09_card_info_destructor; - } +static int +sddr09_common_init(struct us_data *us) { + int result; + + /* set the configuration -- STALL is an acceptable response here */ + if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { + US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev + ->actconfig->desc.bConfigurationValue); + return -EINVAL; + } + + result = usb_reset_configuration(us->pusb_dev); + US_DEBUGP("Result of usb_reset_configuration is %d\n", result); + if (result == -EPIPE) { + US_DEBUGP("-- stall on control interface\n"); + } else if (result != 0) { + /* it's not a stall, but another error -- time to bail */ + US_DEBUGP("-- Unknown error. Rejecting device\n"); + return -EINVAL; } + + us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO); + if (!us->extra) + return -ENOMEM; + us->extra_destructor = sddr09_card_info_destructor; + + nand_init_ecc(); + return 0; } + /* * This is needed at a very early stage. If this is not listed in the * unusual devices list but called from here then LUN 0 of the combo reader * is not recognized. But I do not know what precisely these calls do. */ int -sddr09_init(struct us_data *us) { +usb_stor_sddr09_dpcm_init(struct us_data *us) { int result; unsigned char *data = us->iobuf; + result = sddr09_common_init(us); + if (result) + return result; + result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); if (result != USB_STOR_TRANSPORT_GOOD) { US_DEBUGP("sddr09_init: send_command fails\n"); @@ -1398,7 +1436,7 @@ sddr09_init(struct us_data *us) { // test unit ready - return USB_STOR_TRANSPORT_GOOD; /* not result */ + return 0; /* not result */ } /* @@ -1427,13 +1465,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) }; info = (struct sddr09_card_info *)us->extra; - if (!info) { - nand_init_ecc(); - sddr09_init_card_info(us); - info = (struct sddr09_card_info *)us->extra; - if (!info) - return USB_STOR_TRANSPORT_ERROR; - } if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) { /* for a faked command, we have to follow with a faked sense */ @@ -1606,3 +1637,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } +/* + * Initialization routine for the sddr09 subdriver + */ +int +usb_stor_sddr09_init(struct us_data *us) { + return sddr09_common_init(us); +} diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h index c9d78d6188b..c03089a9ec3 100644 --- a/drivers/usb/storage/sddr09.h +++ b/drivers/usb/storage/sddr09.h @@ -31,18 +31,7 @@ extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); -struct sddr09_card_info { - unsigned long capacity; /* Size of card in bytes */ - int pagesize; /* Size of page in bytes */ - int pageshift; /* log2 of pagesize */ - int blocksize; /* Size of block in pages */ - int blockshift; /* log2 of blocksize */ - int blockmask; /* 2^blockshift - 1 */ - int *lba_to_pba; /* logical to physical map */ - int *pba_to_lba; /* physical to logical map */ - int lbact; /* number of available pages */ - int flags; -#define SDDR09_WP 1 /* write protected */ -}; +extern int usb_stor_sddr09_dpcm_init(struct us_data *us); +extern int usb_stor_sddr09_init(struct us_data *us); #endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 100f53c2097..be3c06d1753 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -284,14 +284,14 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR09", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), /* This entry is from Andries.Brouwer@cwi.nl */ UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB SmartMedia / CompactFlash Adapter", - US_SC_SCSI, US_PR_DPCM_USB, sddr09_init, + US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, 0), #endif @@ -681,8 +681,8 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, "Olympus", "Camedia MAUSB-2", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), #endif /* Reported by Darsen Lu */ @@ -747,8 +747,8 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, "Sandisk", "ImageMate SDDR-09", - US_SC_SCSI, US_PR_EUSB_SDDR09, NULL, - US_FL_SINGLE_LUN ), + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), #endif #ifdef CONFIG_USB_STORAGE_FREECOM diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index ca02ae97be8..85c8c17b3c0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -919,28 +919,6 @@ static int storage_probe(struct usb_interface *intf, */ get_device_info(us, id); -#ifdef CONFIG_USB_STORAGE_SDDR09 - if (us->protocol == US_PR_EUSB_SDDR09 || - us->protocol == US_PR_DPCM_USB) { - /* set the configuration -- STALL is an acceptable response here */ - if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { - US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev - ->actconfig->desc.bConfigurationValue); - goto BadDevice; - } - result = usb_reset_configuration(us->pusb_dev); - - US_DEBUGP("Result of usb_reset_configuration is %d\n", result); - if (result == -EPIPE) { - US_DEBUGP("-- stall on control interface\n"); - } else if (result != 0) { - /* it's not a stall, but another error -- time to bail */ - US_DEBUGP("-- Unknown error. Rejecting device\n"); - goto BadDevice; - } - } -#endif - /* Get the transport, protocol, and pipe settings */ result = get_transport(us); if (result) -- cgit v1.2.3-70-g09d2 From 0dc08a357538de3d93305fbf99348663abdbf2cd Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:58:52 -0800 Subject: [PATCH] USB Storage: sddr09 cleanups This is the second of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as595) updates the code to use standard error values for return codes instead of our special-purpose USB_STOR_TRANSPORT_... codes. The reverse update is then needed in the transport routine, but with the Sim-SCSI framework that routine will go away. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/sddr09.c | 103 +++++++++++++++++++++---------------------- 1 file changed, 50 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 6c379b6b43d..760fe9362b6 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -274,8 +274,11 @@ sddr09_send_command(struct us_data *us, rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype, 0, 0, xfer_data, xfer_len); - return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : - USB_STOR_TRANSPORT_ERROR); + switch (rc) { + case USB_STOR_XFER_GOOD: return 0; + case USB_STOR_XFER_STALLED: return -EPIPE; + default: return -EIO; + } } static int @@ -322,20 +325,12 @@ sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) { command[4] = buflen; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { - US_DEBUGP("request sense failed\n"); + if (result) return result; - } result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, sensebuf, buflen, NULL); - if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("request sense bulk in failed\n"); - return USB_STOR_TRANSPORT_ERROR; - } else { - US_DEBUGP("request sense worked\n"); - return USB_STOR_TRANSPORT_GOOD; - } + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } /* @@ -383,7 +378,7 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", x, result); return result; @@ -395,9 +390,9 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", x, result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } /* @@ -511,7 +506,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) US_DEBUGP("Result for send_control in sddr09_erase %d\n", result); @@ -569,7 +564,7 @@ sddr09_writeX(struct us_data *us, result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_writeX %d\n", result); return result; @@ -581,9 +576,9 @@ sddr09_writeX(struct us_data *us, if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } /* erase address, write same address */ @@ -647,7 +642,7 @@ sddr09_read_sg_test_only(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 4*nsg+3); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", result); return result; @@ -655,7 +650,7 @@ sddr09_read_sg_test_only(struct us_data *us) { buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO); if (!buf) - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, buf, bulklen, NULL); @@ -663,10 +658,10 @@ sddr09_read_sg_test_only(struct us_data *us) { if (result != USB_STOR_XFER_GOOD) { US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", result); - return USB_STOR_TRANSPORT_ERROR; + return -EIO; } - return USB_STOR_TRANSPORT_GOOD; + return 0; } #endif @@ -695,14 +690,13 @@ sddr09_read_status(struct us_data *us, unsigned char *status) { command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, 64, NULL); *status = data[0]; - return (result == USB_STOR_XFER_GOOD ? - USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int @@ -725,7 +719,7 @@ sddr09_read_data(struct us_data *us, buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { printk("sddr09_read_data: Out of memory\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Figure out the initial LBA and page @@ -736,7 +730,7 @@ sddr09_read_data(struct us_data *us, // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. - result = USB_STOR_TRANSPORT_GOOD; + result = 0; index = offset = 0; while (sectors > 0) { @@ -749,7 +743,7 @@ sddr09_read_data(struct us_data *us, if (lba >= maxlba) { US_DEBUGP("Error: Requested lba %u exceeds " "maximum %u\n", lba, maxlba); - result = USB_STOR_TRANSPORT_ERROR; + result = -EIO; break; } @@ -763,7 +757,7 @@ sddr09_read_data(struct us_data *us, /* This is not really an error. It just means that the block has never been written. - Instead of returning USB_STOR_TRANSPORT_ERROR + Instead of returning an error it is better to return all zero data. */ memset(buffer, 0, len); @@ -778,7 +772,7 @@ sddr09_read_data(struct us_data *us, result = sddr09_read20(us, address>>1, pages, info->pageshift, buffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) break; } @@ -844,7 +838,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, pba = sddr09_find_unused_pba(info, lba); if (!pba) { printk("sddr09_write_lba: Out of unused blocks\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOSPC; } info->pba_to_lba[pba] = lba; info->lba_to_pba[lba] = pba; @@ -855,7 +849,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ printk("sddr09: avoid writing to pba 1\n"); - return USB_STOR_TRANSPORT_GOOD; + return 0; } pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT); @@ -864,7 +858,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, address = (pba << (info->pageshift + info->blockshift)); result = sddr09_read22(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; /* check old contents and fill lba */ @@ -911,7 +905,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, { unsigned char status = 0; int result2 = sddr09_read_status(us, &status); - if (result2 != USB_STOR_TRANSPORT_GOOD) + if (result2) US_DEBUGP("sddr09_write_inplace: cannot read status\n"); else if (status != 0xc0) US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", @@ -952,7 +946,7 @@ sddr09_write_data(struct us_data *us, blockbuffer = kmalloc(blocklen, GFP_NOIO); if (!blockbuffer) { printk("sddr09_write_data: Out of memory\n"); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Since we don't write the user data directly to the device, @@ -964,14 +958,14 @@ sddr09_write_data(struct us_data *us, if (buffer == NULL) { printk("sddr09_write_data: Out of memory\n"); kfree(blockbuffer); - return USB_STOR_TRANSPORT_ERROR; + return -ENOMEM; } // Figure out the initial LBA and page lba = address >> info->blockshift; page = (address & info->blockmask); - result = USB_STOR_TRANSPORT_GOOD; + result = 0; index = offset = 0; while (sectors > 0) { @@ -987,7 +981,7 @@ sddr09_write_data(struct us_data *us, result = sddr09_write_lba(us, lba, page, pages, buffer, blockbuffer); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) break; page = 0; @@ -1036,7 +1030,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { command[1] = LUNBITS; result = sddr09_send_scsi_command(us, command, 12); - if (result != USB_STOR_TRANSPORT_GOOD) + if (result) return result; result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, @@ -1045,8 +1039,7 @@ sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) { for (i = 0; i < 4; i++) deviceID[i] = content[i]; - return (result == USB_STOR_XFER_GOOD ? - USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); + return (result == USB_STOR_XFER_GOOD ? 0 : -EIO); } static int @@ -1055,7 +1048,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { unsigned char status; result = sddr09_read_status(us, &status); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_get_wp: read_status fails\n"); return result; } @@ -1071,7 +1064,7 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { if (status & 0x1) US_DEBUGP(" Error"); US_DEBUGP("\n"); - return USB_STOR_TRANSPORT_GOOD; + return 0; } #if 0 @@ -1103,7 +1096,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { result = sddr09_read_deviceID(us, deviceID); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("Result of read_deviceID is %d\n", result); printk("sddr09: could not read card info\n"); return NULL; @@ -1214,7 +1207,7 @@ sddr09_read_map(struct us_data *us) { us, address>>1, min(alloc_blocks, numblocks - i), buffer, 0); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { result = -1; goto done; } @@ -1402,7 +1395,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { return result; result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_init: send_command fails\n"); return result; } @@ -1411,7 +1404,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { // get 07 02 result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_init: 2nd send_command fails\n"); return result; } @@ -1420,7 +1413,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { // get 07 00 result = sddr09_request_sense(us, data, 18); - if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) { + if (result == 0 && data[2] != 0) { int j; for (j=0; j<18; j++) printk(" %02X", data[j]); @@ -1567,7 +1560,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("READ_10: read page %d pagect %d\n", page, pages); - return sddr09_read_data(us, page, pages); + result = sddr09_read_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); } if (srb->cmnd[0] == WRITE_10) { @@ -1580,7 +1575,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("WRITE_10: write page %d pagect %d\n", page, pages); - return sddr09_write_data(us, page, pages); + result = sddr09_write_data(us, page, pages); + return (result == 0 ? USB_STOR_TRANSPORT_GOOD : + USB_STOR_TRANSPORT_ERROR); } /* catch-all for all other commands, except @@ -1606,10 +1603,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("SDDR09: Send control for command %s\n", ptr); result = sddr09_send_scsi_command(us, srb->cmnd, 12); - if (result != USB_STOR_TRANSPORT_GOOD) { + if (result) { US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " "returns %d\n", result); - return result; + return USB_STOR_TRANSPORT_ERROR; } if (srb->request_bufflen == 0) -- cgit v1.2.3-70-g09d2 From a6c976c6c4628ce0c9277c47e7545956d9d4f441 Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 21:59:45 -0800 Subject: [PATCH] USB Storage: more sddr09 cleanups This is the third of three patches to prepare the sddr09 subdriver for conversion to the Sim-SCSI framework. This patch (as596) moves the computation of the LBA to the start of the read/write routines, so that addresses completely beyond the end of the device can be detected and reported differently from transfers that are partially within the device's capacity. Signed-off-by: Alan Stern Acked-by: Andries Brouwer Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/sddr09.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 760fe9362b6..b8e7802c871 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -711,6 +711,13 @@ sddr09_read_data(struct us_data *us, unsigned int len, index, offset; int result; + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + // Since we only read in one block at a time, we have to create // a bounce buffer and move the data a piece at a time between the // bounce buffer and the actual transfer buffer. @@ -722,11 +729,6 @@ sddr09_read_data(struct us_data *us, return -ENOMEM; } - // Figure out the initial LBA and page - lba = address >> info->blockshift; - page = (address & info->blockmask); - maxlba = info->capacity >> (info->pageshift + info->blockshift); - // This could be made much more efficient by checking for // contiguous LBA's. Another exercise left to the student. @@ -928,13 +930,20 @@ sddr09_write_data(struct us_data *us, unsigned int sectors) { struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra; - unsigned int lba, page, pages; + unsigned int lba, maxlba, page, pages; unsigned int pagelen, blocklen; unsigned char *blockbuffer; unsigned char *buffer; unsigned int len, index, offset; int result; + // Figure out the initial LBA and page + lba = address >> info->blockshift; + page = (address & info->blockmask); + maxlba = info->capacity >> (info->pageshift + info->blockshift); + if (lba >= maxlba) + return -EIO; + // blockbuffer is used for reading in the old data, overwriting // with the new data, and performing ECC calculations @@ -961,10 +970,6 @@ sddr09_write_data(struct us_data *us, return -ENOMEM; } - // Figure out the initial LBA and page - lba = address >> info->blockshift; - page = (address & info->blockmask); - result = 0; index = offset = 0; @@ -975,6 +980,14 @@ sddr09_write_data(struct us_data *us, pages = min(sectors, info->blocksize - page); len = (pages << info->pageshift); + /* Not overflowing capacity? */ + if (lba >= maxlba) { + US_DEBUGP("Error: Requested lba %u exceeds " + "maximum %u\n", lba, maxlba); + result = -EIO; + break; + } + // Get the data from the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, &index, &offset, FROM_XFER_BUF); -- cgit v1.2.3-70-g09d2 From e80b0fade09ef1ee67b0898d480d4c588f124d5f Mon Sep 17 00:00:00 2001 From: Matthew Dharm Date: Sun, 4 Dec 2005 22:02:44 -0800 Subject: [PATCH] USB Storage: add alauda support This patch adds another usb-storage subdriver, which supports two fairly old dual-XD/SmartMedia reader-writers (USB1.1 devices). This driver was written by Daniel Drake -- he notes that he wrote this driver without specs, however a vendor-supplied GPL driver for the previous generation of products ("sma03") did prove to be quite useful, as did the sddr09 driver which also has to deal with low-level physical block layout on SmartMedia. The original patch has been reformed by me, as it clashed with the libusual patches. We really need to consolidate some of this common SmartMedia code, and get together with the MTD guys to share it with them as well. Signed-off-by: Daniel Drake Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 9 + drivers/usb/storage/Makefile | 1 + drivers/usb/storage/alauda.c | 1119 ++++++++++++++++++++++++++++++++++++ drivers/usb/storage/alauda.h | 100 ++++ drivers/usb/storage/unusual_devs.h | 14 + drivers/usb/storage/usb.c | 12 + include/linux/usb_usual.h | 3 + 7 files changed, 1258 insertions(+) create mode 100644 drivers/usb/storage/alauda.c create mode 100644 drivers/usb/storage/alauda.h (limited to 'drivers') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index bdfcb95d9c1..92be101feba 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -112,6 +112,15 @@ config USB_STORAGE_JUMPSHOT Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. +config USB_STORAGE_ALAUDA + bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)" + depends on USB_STORAGE && EXPERIMENTAL + help + Say Y here to include additional code to support the Olympus MAUSB-10 + and Fujifilm DPC-R1 USB Card reader/writer devices. + + These devices are based on the Alauda chip and support support both + XD and SmartMedia cards. config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 2d416e9028b..8cbba22508a 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -18,6 +18,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o +usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c new file mode 100644 index 00000000000..4d3cbb12b71 --- /dev/null +++ b/drivers/usb/storage/alauda.c @@ -0,0 +1,1119 @@ +/* + * Driver for Alauda-based card readers + * + * Current development and maintenance by: + * (c) 2005 Daniel Drake + * + * The 'Alauda' is a chip manufacturered by RATOC for OEM use. + * + * Alauda implements a vendor-specific command set to access two media reader + * ports (XD, SmartMedia). This driver converts SCSI commands to the commands + * which are accepted by these devices. + * + * The driver was developed through reverse-engineering, with the help of the + * sddr09 driver which has many similarities, and with some help from the + * (very old) vendor-supplied GPL sma03 driver. + * + * For protocol info, see http://alauda.sourceforge.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" +#include "alauda.h" + +#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) +#define LSB_of(s) ((s)&0xFF) +#define MSB_of(s) ((s)>>8) + +#define MEDIA_PORT(us) us->srb->device->lun +#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)] + +#define PBA_LO(pba) ((pba & 0xF) << 5) +#define PBA_HI(pba) (pba >> 3) +#define PBA_ZONE(pba) (pba >> 11) + +/* + * Media handling + */ + +struct alauda_card_info { + unsigned char id; /* id byte */ + unsigned char chipshift; /* 1< LBA mappings for a particular port + */ +static void alauda_free_maps (struct alauda_media_info *media_info) +{ + unsigned int shift = media_info->zoneshift + + media_info->blockshift + media_info->pageshift; + unsigned int num_zones = media_info->capacity >> shift; + unsigned int i; + + if (media_info->lba_to_pba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->lba_to_pba[i]); + media_info->lba_to_pba[i] = NULL; + } + + if (media_info->pba_to_lba != NULL) + for (i = 0; i < num_zones; i++) { + kfree(media_info->pba_to_lba[i]); + media_info->pba_to_lba[i] = NULL; + } +} + +/* + * Returns 2 bytes of status data + * The first byte describes media status, and second byte describes door status + */ +static int alauda_get_media_status(struct us_data *us, unsigned char *data) +{ + int rc; + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_STATUS; + else + command = ALAUDA_GET_SM_MEDIA_STATUS; + + rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 1, data, 2); + + US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", + data[0], data[1]); + + return rc; +} + +/* + * Clears the "media was changed" bit so that we know when it changes again + * in the future. + */ +static int alauda_ack_media(struct us_data *us) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_ACK_XD_MEDIA_CHANGE; + else + command = ALAUDA_ACK_SM_MEDIA_CHANGE; + + return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, + command, 0x40, 0, 1, NULL, 0); +} + +/* + * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, + * and some other details. + */ +static int alauda_get_media_signature(struct us_data *us, unsigned char *data) +{ + unsigned char command; + + if (MEDIA_PORT(us) == ALAUDA_PORT_XD) + command = ALAUDA_GET_XD_MEDIA_SIG; + else + command = ALAUDA_GET_SM_MEDIA_SIG; + + return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, + command, 0xc0, 0, 0, data, 4); +} + +/* + * Resets the media status (but not the whole device?) + */ +static int alauda_reset_media(struct us_data *us) +{ + unsigned char *command = us->iobuf; + + memset(command, 0, 9); + command[0] = ALAUDA_BULK_CMD; + command[1] = ALAUDA_BULK_RESET_MEDIA; + command[8] = MEDIA_PORT(us); + + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); +} + +/* + * Examines the media and deduces capacity, etc. + */ +static int alauda_init_media(struct us_data *us) +{ + unsigned char *data = us->iobuf; + int ready = 0; + struct alauda_card_info *media_info; + unsigned int num_zones; + + while (ready == 0) { + msleep(20); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] & 0x10) + ready = 1; + } + + US_DEBUGP("alauda_init_media: We are ready for action!\n"); + + if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + msleep(10); + + if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + if (data[0] != 0x14) { + US_DEBUGP("alauda_init_media: Media not ready after ack\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); + media_info = alauda_card_find_id(data[1]); + if (media_info == NULL) { + printk("alauda_init_media: Unrecognised media signature: " + "%02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); + return USB_STOR_TRANSPORT_ERROR; + } + + MEDIA_INFO(us).capacity = 1 << media_info->chipshift; + US_DEBUGP("Found media with capacity: %ldMB\n", + MEDIA_INFO(us).capacity >> 20); + + MEDIA_INFO(us).pageshift = media_info->pageshift; + MEDIA_INFO(us).blockshift = media_info->blockshift; + MEDIA_INFO(us).zoneshift = media_info->zoneshift; + + MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; + MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; + MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; + + MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; + MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); + + if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Examines the media status and does the right thing when the media has gone, + * appeared, or changed. + */ +static int alauda_check_media(struct us_data *us) +{ + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char status[2]; + int rc; + + rc = alauda_get_media_status(us, status); + + /* Check for no media or door open */ + if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) + || ((status[1] & 0x01) == 0)) { + US_DEBUGP("alauda_check_media: No media, or door open\n"); + alauda_free_maps(&MEDIA_INFO(us)); + info->sense_key = 0x02; + info->sense_asc = 0x3A; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + /* Check for media change */ + if (status[0] & 0x08) { + US_DEBUGP("alauda_check_media: Media change detected\n"); + alauda_free_maps(&MEDIA_INFO(us)); + alauda_init_media(us); + + info->sense_key = UNIT_ATTENTION; + info->sense_asc = 0x28; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Checks the status from the 2nd status register + * Returns 3 bytes of status data, only the first is known + */ +static int alauda_check_status2(struct us_data *us) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, + 0, 0, 0, 0, 3, 0, MEDIA_PORT(us) + }; + unsigned char data[3]; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 3, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); + if (data[0] & ALAUDA_STATUS_ERROR) + return USB_STOR_XFER_ERROR; + + return USB_STOR_XFER_GOOD; +} + +/* + * Gets the redundancy data for the first page of a PBA + * Returns 16 bytes. + */ +static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, + PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) + }; + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, 16, NULL); +} + +/* + * Finds the first unused PBA in a zone + * Returns the absolute PBA of an unused PBA, or 0 if none found. + */ +static u16 alauda_find_unused_pba(struct alauda_media_info *info, + unsigned int zone) +{ + u16 *pba_to_lba = info->pba_to_lba[zone]; + unsigned int i; + + for (i = 0; i < info->zonesize; i++) + if (pba_to_lba[i] == UNDEF) + return (zone << info->zoneshift) + i; + + return 0; +} + +/* + * Reads the redundancy data for all PBA's in a zone + * Produces lba <--> pba mappings + */ +static int alauda_read_map(struct us_data *us, unsigned int zone) +{ + unsigned char *data = us->iobuf; + int result; + int i, j; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int lba_offset, lba_real, blocknum; + unsigned int zone_base_lba = zone * uzonesize; + unsigned int zone_base_pba = zone * zonesize; + u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); + if (lba_to_pba == NULL || pba_to_lba == NULL) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); + + /* 1024 PBA's per zone */ + for (i = 0; i < zonesize; i++) + lba_to_pba[i] = pba_to_lba[i] = UNDEF; + + for (i = 0; i < zonesize; i++) { + blocknum = zone_base_pba + i; + + result = alauda_get_redu_data(us, blocknum, data); + if (result != USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; + goto error; + } + + /* special PBAs have control field 0^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0) + goto nonz; + pba_to_lba[i] = UNUSABLE; + US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); + continue; + + nonz: + /* unwritten PBAs have control field FF^16 */ + for (j = 0; j < 16; j++) + if (data[j] != 0xff) + goto nonff; + continue; + + nonff: + /* normal PBAs start with six FFs */ + if (j < 6) { + US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " + "reserved area = %02X%02X%02X%02X " + "data status %02X block status %02X\n", + blocknum, data[0], data[1], data[2], data[3], + data[4], data[5]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + if ((data[6] >> 4) != 0x01) { + US_DEBUGP("alauda_read_map: PBA %d has invalid address " + "field %02X%02X/%02X%02X\n", + blocknum, data[6], data[7], data[11], data[12]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + /* check even parity */ + if (parity[data[6] ^ data[7]]) { + printk("alauda_read_map: Bad parity in LBA for block %d" + " (%02X %02X)\n", i, data[6], data[7]); + pba_to_lba[i] = UNUSABLE; + continue; + } + + lba_offset = short_pack(data[7], data[6]); + lba_offset = (lba_offset & 0x07FF) >> 1; + lba_real = lba_offset + zone_base_lba; + + /* + * Every 1024 physical blocks ("zone"), the LBA numbers + * go back to zero, but are within a higher block of LBA's. + * Also, there is a maximum of 1000 LBA's per zone. + * In other words, in PBA 1024-2047 you will find LBA 0-999 + * which are really LBA 1000-1999. This allows for 24 bad + * or special physical blocks per zone. + */ + + if (lba_offset >= uzonesize) { + printk("alauda_read_map: Bad low LBA %d for block %d\n", + lba_real, blocknum); + continue; + } + + if (lba_to_pba[lba_offset] != UNDEF) { + printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", + lba_real, lba_to_pba[lba_offset], blocknum); + continue; + } + + pba_to_lba[i] = lba_real; + lba_to_pba[lba_offset] = blocknum; + continue; + } + + MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; + MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; + result = 0; + goto out; + +error: + kfree(lba_to_pba); + kfree(pba_to_lba); +out: + return result; +} + +/* + * Checks to see whether we have already mapped a certain zone + * If we haven't, the map is generated + */ +static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) +{ + if (MEDIA_INFO(us).lba_to_pba[zone] == NULL + || MEDIA_INFO(us).pba_to_lba[zone] == NULL) + alauda_read_map(us, zone); +} + +/* + * Erases an entire block + */ +static int alauda_erase_block(struct us_data *us, u16 pba) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) + }; + unsigned char buf[2]; + + US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + buf, 2, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", + buf[0], buf[1]); + return rc; +} + +/* + * Reads data from a certain offset page inside a PBA, including interleaved + * redundancy data. Returns (pagesize+64)*pages bytes in data. + */ +static int alauda_read_block_raw(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int rc; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) + }; + + US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", + pba, page, pages); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); +} + +/* + * Reads data from a certain offset page inside a PBA, excluding redundancy + * data. Returns pagesize*pages bytes in data. Note that data must be big enough + * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' + * trailing bytes outside this function. + */ +static int alauda_read_block(struct us_data *us, u16 pba, + unsigned int page, unsigned int pages, unsigned char *data) +{ + int i, rc; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + + rc = alauda_read_block_raw(us, pba, page, pages, data); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + /* Cut out the redundancy data */ + for (i = 0; i < pages; i++) { + int dest_offset = i * pagesize; + int src_offset = i * (pagesize + 64); + memmove(data + dest_offset, data + src_offset, pagesize); + } + + return rc; +} + +/* + * Writes an entire block of data and checks status after write. + * Redundancy data must be already included in data. Data should be + * (pagesize+64)*blocksize bytes in length. + */ +static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char command[] = { + ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), + PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) + }; + + US_DEBUGP("alauda_write_block: pba %d\n", pba); + + rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + command, 9, NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, + (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, + NULL); + if (rc != USB_STOR_XFER_GOOD) + return rc; + + return alauda_check_status2(us); +} + +/* + * Write some data to a specific LBA. + */ +static int alauda_write_lba(struct us_data *us, u16 lba, + unsigned int page, unsigned int pages, + unsigned char *ptr, unsigned char *blockbuffer) +{ + u16 pba, lbap, new_pba; + unsigned char *bptr, *cptr, *xptr; + unsigned char ecc[3]; + int i, result; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + unsigned int zonesize = MEDIA_INFO(us).zonesize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int lba_offset = lba % uzonesize; + unsigned int new_pba_offset; + unsigned int zone = lba / uzonesize; + + alauda_ensure_map_for_zone(us, zone); + + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + if (pba == 1) { + /* Maybe it is impossible to write to PBA 1. + Fake success, but don't do anything. */ + printk("alauda_write_lba: avoid writing to pba 1\n"); + return USB_STOR_TRANSPORT_GOOD; + } + + new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); + if (!new_pba) { + printk("alauda_write_lba: Out of unused blocks\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* read old contents */ + if (pba != UNDEF) { + result = alauda_read_block_raw(us, pba, 0, + blocksize, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + } else { + memset(blockbuffer, 0, blocksize * (pagesize + 64)); + } + + lbap = (lba_offset << 1) | 0x1000; + if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) + lbap ^= 1; + + /* check old contents and fill lba */ + for (i = 0; i < blocksize; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + nand_compute_ecc(bptr, ecc); + if (!nand_compare_ecc(cptr+13, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", + i, pba); + nand_store_ecc(cptr+13, ecc); + } + nand_compute_ecc(bptr + (pagesize / 2), ecc); + if (!nand_compare_ecc(cptr+8, ecc)) { + US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", + i, pba); + nand_store_ecc(cptr+8, ecc); + } + cptr[6] = cptr[11] = MSB_of(lbap); + cptr[7] = cptr[12] = LSB_of(lbap); + } + + /* copy in new stuff and compute ECC */ + xptr = ptr; + for (i = page; i < page+pages; i++) { + bptr = blockbuffer + (i * (pagesize + 64)); + cptr = bptr + pagesize; + memcpy(bptr, xptr, pagesize); + xptr += pagesize; + nand_compute_ecc(bptr, ecc); + nand_store_ecc(cptr+13, ecc); + nand_compute_ecc(bptr + (pagesize / 2), ecc); + nand_store_ecc(cptr+8, ecc); + } + + result = alauda_write_block(us, new_pba, blockbuffer); + if (result != USB_STOR_XFER_GOOD) + return result; + + new_pba_offset = new_pba - (zone * zonesize); + MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; + MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; + US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", + lba, new_pba); + + if (pba != UNDEF) { + unsigned int pba_offset = pba - (zone * zonesize); + result = alauda_erase_block(us, pba); + if (result != USB_STOR_XFER_GOOD) + return result; + MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; + } + + return USB_STOR_TRANSPORT_GOOD; +} + +/* + * Read data from a specific sector address + */ +static int alauda_read_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer; + u16 lba, max_lba; + unsigned int page, len, index, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + unsigned int uzonesize = MEDIA_INFO(us).uzonesize; + int result; + + /* + * Since we only read in one block at a time, we have to create + * a bounce buffer and move the data a piece at a time between the + * bounce buffer and the actual transfer buffer. + * We make this buffer big enough to hold temporary redundancy data, + * which we use when reading the data blocks. + */ + + len = min(sectors, blocksize) * (pagesize + 64); + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("alauda_read_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + unsigned int zone = lba / uzonesize; /* integer division */ + unsigned int lba_offset = lba - (zone * uzonesize); + unsigned int pages; + u16 pba; + alauda_ensure_map_for_zone(us, zone); + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + US_DEBUGP("Error: Requested lba %u exceeds " + "maximum %u\n", lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Find number of pages we can read in this block */ + pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Find where this lba lives on disk */ + pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; + + if (pba == UNDEF) { /* this lba was never written */ + US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); + + /* This is not really an error. It just means + that the block has never been written. + Instead of returning USB_STOR_TRANSPORT_ERROR + it is better to return all zero data. */ + + memset(buffer, 0, len); + } else { + US_DEBUGP("Read %d pages, from PBA %d" + " (LBA %d) page %d\n", + pages, pba, lba, page); + + result = alauda_read_block(us, pba, page, pages, buffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + } + + /* Store the data in the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, TO_XFER_BUF); + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + return result; +} + +/* + * Write data to a specific sector address + */ +static int alauda_write_data(struct us_data *us, unsigned long address, + unsigned int sectors) +{ + unsigned char *buffer, *blockbuffer; + unsigned int page, len, index, offset; + unsigned int blockshift = MEDIA_INFO(us).blockshift; + unsigned int pageshift = MEDIA_INFO(us).pageshift; + unsigned int blocksize = MEDIA_INFO(us).blocksize; + unsigned int pagesize = MEDIA_INFO(us).pagesize; + u16 lba, max_lba; + int result; + + /* + * Since we don't write the user data directly to the device, + * we have to create a bounce buffer and move the data a piece + * at a time between the bounce buffer and the actual transfer buffer. + */ + + len = min(sectors, blocksize) * pagesize; + buffer = kmalloc(len, GFP_NOIO); + if (buffer == NULL) { + printk("alauda_write_data: Out of memory\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + /* + * We also need a temporary block buffer, where we read in the old data, + * overwrite parts with the new data, and manipulate the redundancy data + */ + blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); + if (blockbuffer == NULL) { + printk("alauda_write_data: Out of memory\n"); + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; + } + + /* Figure out the initial LBA and page */ + lba = address >> blockshift; + page = (address & MEDIA_INFO(us).blockmask); + max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); + + result = USB_STOR_TRANSPORT_GOOD; + index = offset = 0; + + while (sectors > 0) { + /* Write as many sectors as possible in this block */ + unsigned int pages = min(sectors, blocksize - page); + len = pages << pageshift; + + /* Not overflowing capacity? */ + if (lba >= max_lba) { + US_DEBUGP("alauda_write_data: Requested lba %u exceeds " + "maximum %u\n", lba, max_lba); + result = USB_STOR_TRANSPORT_ERROR; + break; + } + + /* Get the data from the transfer buffer */ + usb_stor_access_xfer_buf(buffer, len, us->srb, + &index, &offset, FROM_XFER_BUF); + + result = alauda_write_lba(us, lba, page, pages, buffer, + blockbuffer); + if (result != USB_STOR_TRANSPORT_GOOD) + break; + + page = 0; + lba++; + sectors -= pages; + } + + kfree(buffer); + kfree(blockbuffer); + return result; +} + +/* + * Our interface with the rest of the world + */ + +static void alauda_info_destructor(void *extra) +{ + struct alauda_info *info = (struct alauda_info *) extra; + int port; + + if (!info) + return; + + for (port = 0; port < 2; port++) { + struct alauda_media_info *media_info = &info->port[port]; + + alauda_free_maps(media_info); + kfree(media_info->lba_to_pba); + kfree(media_info->pba_to_lba); + } +} + +/* + * Initialize alauda_info struct and find the data-write endpoint + */ +int init_alauda(struct us_data *us) +{ + struct alauda_info *info; + struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; + nand_init_ecc(); + + us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); + if (!us->extra) { + US_DEBUGP("init_alauda: Gah! Can't allocate storage for" + "alauda info struct!\n"); + return USB_STOR_TRANSPORT_ERROR; + } + info = (struct alauda_info *) us->extra; + us->extra_destructor = alauda_info_destructor; + + info->wr_ep = usb_sndbulkpipe(us->pusb_dev, + altsetting->endpoint[0].desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + return USB_STOR_TRANSPORT_GOOD; +} + +int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int rc; + struct alauda_info *info = (struct alauda_info *) us->extra; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_response[36] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (srb->cmnd[0] == INQUIRY) { + US_DEBUGP("alauda_transport: INQUIRY. " + "Returning bogus response.\n"); + memcpy(ptr, inquiry_response, sizeof(inquiry_response)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); + return alauda_check_media(us); + } + + if (srb->cmnd[0] == READ_CAPACITY) { + unsigned int num_zones; + unsigned long capacity; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift + + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); + + capacity = num_zones * MEDIA_INFO(us).uzonesize + * MEDIA_INFO(us).blocksize; + + /* Report capacity and page size */ + ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(512); + + usb_stor_set_xfer_buf(ptr, 8, srb); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", + page, pages); + + return alauda_read_data(us, page, pages); + } + + if (srb->cmnd[0] == WRITE_10) { + unsigned int page, pages; + + rc = alauda_check_media(us); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + page = short_pack(srb->cmnd[3], srb->cmnd[2]); + page <<= 16; + page |= short_pack(srb->cmnd[5], srb->cmnd[4]); + pages = short_pack(srb->cmnd[8], srb->cmnd[7]); + + US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", + page, pages); + + return alauda_write_data(us, page, pages); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); + + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + /* sure. whatever. not like we can stop the user from popping + the media out of the device (no locking doors, etc) */ + return USB_STOR_TRANSPORT_GOOD; + } + + US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h new file mode 100644 index 00000000000..a700f87d080 --- /dev/null +++ b/drivers/usb/storage/alauda.h @@ -0,0 +1,100 @@ +/* + * Driver for Alauda-based card readers + * + * Current development and maintenance by: + * (c) 2005 Daniel Drake + * + * See alauda.c for more explanation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _USB_ALAUDA_H +#define _USB_ALAUDA_H + +/* + * Status bytes + */ +#define ALAUDA_STATUS_ERROR 0x01 +#define ALAUDA_STATUS_READY 0x40 + +/* + * Control opcodes (for request field) + */ +#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 +#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 +#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a +#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a +#define ALAUDA_GET_XD_MEDIA_SIG 0x86 +#define ALAUDA_GET_SM_MEDIA_SIG 0x96 + +/* + * Bulk command identity (byte 0) + */ +#define ALAUDA_BULK_CMD 0x40 + +/* + * Bulk opcodes (byte 1) + */ +#define ALAUDA_BULK_GET_REDU_DATA 0x85 +#define ALAUDA_BULK_READ_BLOCK 0x94 +#define ALAUDA_BULK_ERASE_BLOCK 0xa3 +#define ALAUDA_BULK_WRITE_BLOCK 0xb4 +#define ALAUDA_BULK_GET_STATUS2 0xb7 +#define ALAUDA_BULK_RESET_MEDIA 0xe0 + +/* + * Port to operate on (byte 8) + */ +#define ALAUDA_PORT_XD 0x00 +#define ALAUDA_PORT_SM 0x01 + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffff +#define SPARE 0xfffe +#define UNUSABLE 0xfffd + +int init_alauda(struct us_data *us); +int alauda_transport(struct scsi_cmnd *srb, struct us_data *us); + +struct alauda_media_info { + unsigned long capacity; /* total media size in bytes */ + unsigned int pagesize; /* page size in bytes */ + unsigned int blocksize; /* number of pages per block */ + unsigned int uzonesize; /* number of usable blocks per zone */ + unsigned int zonesize; /* number of blocks per zone */ + unsigned int blockmask; /* mask to get page from address */ + + unsigned char pageshift; + unsigned char blockshift; + unsigned char zoneshift; + + u16 **lba_to_pba; /* logical to physical block map */ + u16 **pba_to_lba; /* physical to logical block map */ +}; + +struct alauda_info { + struct alauda_media_info port[2]; + int wr_ep; /* endpoint to write data out of */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +#endif + diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index be3c06d1753..7a865dd0468 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -535,6 +535,13 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Silicon Media R/W", US_SC_DEVICE, US_PR_DEVICE, NULL, 0), +#ifdef CONFIG_USB_STORAGE_ALAUDA +UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, + "Fujifilm", + "DPC-R1 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), +#endif + /* Fabrizio Fellini */ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Fujifilm", @@ -784,6 +791,13 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, + "Olympus", + "MAUSB-10 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), +#endif + #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, "Datafab", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 85c8c17b3c0..dbcf23980ff 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -94,6 +94,9 @@ #ifdef CONFIG_USB_STORAGE_ONETOUCH #include "onetouch.h" #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +#include "alauda.h" +#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm "); @@ -644,6 +647,15 @@ static int get_protocol(struct us_data *us) break; #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA + case US_PR_ALAUDA: + us->transport_name = "Alauda Control/Bulk"; + us->transport = alauda_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + break; +#endif + default: return -EIO; } diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index f9c058f3371..b2d08984a9f 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -102,6 +102,9 @@ enum { US_DO_ALL_FLAGS }; #ifdef CONFIG_USB_STORAGE_JUMPSHOT #define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ #endif +#ifdef CONFIG_USB_STORAGE_ALAUDA +#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */ +#endif #define US_PR_DEVICE 0xff /* Use device's value */ -- cgit v1.2.3-70-g09d2 From 3717f2952bd0aab30fe2a6af80657abbeb065461 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 30 Nov 2005 13:57:45 -0800 Subject: [PATCH] USB: usb-storage: add debug entry for REPORT LUNS Bugs involving the REPORT LUNS SCSI-3 command are much easier to track down if usb-storage displays the command's name, rather than "(Unknown command)". Signed-off-by: Paul Walmsley Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/debug.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index 5a9321705a7..01e430654a1 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -132,6 +132,7 @@ void usb_stor_show_command(struct scsi_cmnd *srb) case 0x5C: what = "READ BUFFER CAPACITY"; break; case 0x5D: what = "SEND CUE SHEET"; break; case GPCMD_BLANK: what = "BLANK"; break; + case REPORT_LUNS: what = "REPORT LUNS"; break; case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break; case READ_12: what = "READ_12"; break; case WRITE_12: what = "WRITE_12"; break; -- cgit v1.2.3-70-g09d2 From f3d34ed48c80903544b509031fee64838d29f35f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Dec 2005 10:32:13 -0500 Subject: [PATCH] USB: fix local variable clash This patch (as621) fixes a local variable conflict I accidently introduced into usb_set_configuration. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 99ab774d4fd..319de03944e 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1387,11 +1387,11 @@ free_interfaces: if (dev->state != USB_STATE_ADDRESS) usb_disable_device (dev, 1); // Skip ep0 - n = dev->bus_mA - cp->desc.bMaxPower * 2; - if (n < 0) + i = dev->bus_mA - cp->desc.bMaxPower * 2; + if (i < 0) dev_warn(&dev->dev, "new config #%d exceeds power " "limit by %dmA\n", - configuration, -n); + configuration, -i); if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 0, configuration, 0, -- cgit v1.2.3-70-g09d2 From 52950ed40dc97456209979af1d8f51b63cf6dcab Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 11 Dec 2005 16:20:08 +0100 Subject: [PATCH] USB: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some trailing whitespaces are also removed. Patch is compile-tested on i386. Signed-off-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 +- drivers/usb/input/aiptek.c | 4 ++-- drivers/usb/media/ibmcam.c | 2 +- drivers/usb/media/sn9c102_core.c | 23 ++++++++++------------- drivers/usb/media/w9968cf.c | 2 +- drivers/usb/net/zd1201.c | 8 ++++---- drivers/usb/serial/io_edgeport.c | 2 +- drivers/usb/serial/io_edgeport.h | 3 --- drivers/usb/serial/safe_serial.c | 2 +- drivers/usb/serial/ti_usb_3410_5052.c | 7 ++----- drivers/usb/storage/sddr09.c | 4 +--- 11 files changed, 24 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index ce0d4b412df..9734cb76dd6 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -138,7 +138,7 @@ static const char *const ep_name [] = { /* or like sa1100: two fixed function endpoints */ "ep1out-bulk", "ep2in-bulk", }; -#define DUMMY_ENDPOINTS (sizeof(ep_name)/sizeof(char *)) +#define DUMMY_ENDPOINTS ARRAY_SIZE(ep_name) /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 87ae08c99bc..a6693b0d1c4 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -2093,7 +2093,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ - for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) + for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) set_bit(macroKeyEvents[i], inputdev->keybit); /* @@ -2135,7 +2135,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * not an error :-) */ - for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { + for (i = 0; i < ARRAY_SIZE(speeds); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); if (aiptek->inputdev->absmax[ABS_X] > 0) { diff --git a/drivers/usb/media/ibmcam.c b/drivers/usb/media/ibmcam.c index ba41fc7b95c..a42c2229412 100644 --- a/drivers/usb/media/ibmcam.c +++ b/drivers/usb/media/ibmcam.c @@ -3457,7 +3457,7 @@ static void ibmcam_model3_setup_after_video_if(struct uvd *uvd) if(init_model3_input) { if (debug > 0) info("Setting input to RCA."); - for (i=0; i < (sizeof(initData)/sizeof(initData[0])); i++) { + for (i=0; i < ARRAY_SIZE(initData); i++) { ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index); } } diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index 08723459da8..8d1a1c357d5 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -1316,7 +1316,7 @@ static int sn9c102_init(struct sn9c102_device* cam) struct v4l2_control ctrl; struct v4l2_queryctrl *qctrl; struct v4l2_rect* rect; - u8 i = 0, n = 0; + u8 i = 0; int err = 0; if (!(cam->state & DEV_INITIALIZED)) { @@ -1352,7 +1352,7 @@ static int sn9c102_init(struct sn9c102_device* cam) return err; if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X) - DBG(3, "Compressed video format is active, quality %d", + DBG(3, "Compressed video format is active, quality %d", cam->compression.quality) else DBG(3, "Uncompressed video format is active") @@ -1364,9 +1364,8 @@ static int sn9c102_init(struct sn9c102_device* cam) } if (s->set_ctrl) { - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) - if (s->qctrl[i].id != 0 && + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) + if (s->qctrl[i].id != 0 && !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) { ctrl.id = s->qctrl[i].id; ctrl.value = qctrl[i].default_value; @@ -1388,7 +1387,7 @@ static int sn9c102_init(struct sn9c102_device* cam) init_waitqueue_head(&cam->wait_stream); cam->nreadbuffers = 2; memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl)); - memcpy(&(s->_rect), &(s->cropcap.defrect), + memcpy(&(s->_rect), &(s->cropcap.defrect), sizeof(struct v4l2_rect)); cam->state |= DEV_INITIALIZED; } @@ -1810,13 +1809,12 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, { struct sn9c102_sensor* s = cam->sensor; struct v4l2_queryctrl qc; - u8 i, n; + u8 i; if (copy_from_user(&qc, arg, sizeof(qc))) return -EFAULT; - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) if (qc.id && qc.id == s->qctrl[i].id) { memcpy(&qc, &(s->qctrl[i]), sizeof(qc)); if (copy_to_user(arg, &qc, sizeof(qc))) @@ -1852,7 +1850,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, { struct sn9c102_sensor* s = cam->sensor; struct v4l2_control ctrl; - u8 i, n; + u8 i; int err = 0; if (!s->set_ctrl) @@ -1861,8 +1859,7 @@ static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp, if (copy_from_user(&ctrl, arg, sizeof(ctrl))) return -EFAULT; - n = sizeof(s->qctrl) / sizeof(s->qctrl[0]); - for (i = 0; i < n; i++) + for (i = 0; i < ARRAY_SIZE(s->qctrl); i++) if (ctrl.id == s->qctrl[i].id) { if (ctrl.value < s->qctrl[i].minimum || ctrl.value > s->qctrl[i].maximum) @@ -2544,7 +2541,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) unsigned int i, n; int err = 0, r; - n = sizeof(sn9c102_id_table)/sizeof(sn9c102_id_table[0]); + n = ARRAY_SIZE(sn9c102_id_table); for (i = 0; i < n-1; i++) if (le16_to_cpu(udev->descriptor.idVendor) == sn9c102_id_table[i].idVendor && diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 52b90d50feb..8d6a1ff6595 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -2958,7 +2958,7 @@ static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, }; #define V4L1_IOCTL(cmd) \ - ((_IOC_NR((cmd)) < sizeof(v4l1_ioctls)/sizeof(char*)) ? \ + ((_IOC_NR((cmd)) < ARRAY_SIZE(v4l1_ioctls)) ? \ v4l1_ioctls[_IOC_NR((cmd))] : "?") cam = (struct w9968cf_device*)video_get_drvdata(video_devdata(filp)); diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 4d6673adc8f..2af21a620c0 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1722,7 +1722,7 @@ static const struct iw_priv_args zd1201_private_args[] = { IW_PRIV_TYPE_NONE, "sethostauth" }, { ZD1201GIWHOSTAUTH, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "gethostauth" }, - { ZD1201SIWAUTHSTA, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, + { ZD1201SIWAUTHSTA, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, "authstation" }, { ZD1201SIWMAXASSOC, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, IW_PRIV_TYPE_NONE, "setmaxassoc" }, @@ -1731,9 +1731,9 @@ static const struct iw_priv_args zd1201_private_args[] = { }; static const struct iw_handler_def zd1201_iw_handlers = { - .num_standard = sizeof(zd1201_iw_handler)/sizeof(iw_handler), - .num_private = sizeof(zd1201_private_handler)/sizeof(iw_handler), - .num_private_args = sizeof(zd1201_private_args)/sizeof(struct iw_priv_args), + .num_standard = ARRAY_SIZE(zd1201_iw_handler), + .num_private = ARRAY_SIZE(zd1201_private_handler), + .num_private_args = ARRAY_SIZE(zd1201_private_args), .standard = (iw_handler *)zd1201_iw_handler, .private = (iw_handler *)zd1201_private_handler, .private_args = (struct iw_priv_args *) zd1201_private_args, diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 89bb3563c91..faedbeb6ba4 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2353,7 +2353,7 @@ static int calc_baud_rate_divisor (int baudrate, int *divisor) dbg("%s - %d", __FUNCTION__, baudrate); - for (i = 0; i < NUM_ENTRIES(divisor_table); i++) { + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { if ( divisor_table[i].BaudRate == baudrate ) { *divisor = divisor_table[i].Divisor; return 0; diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index 5112d7aac05..123fa8a904e 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -31,9 +31,6 @@ #ifndef HIGH8 #define HIGH8(a) ((unsigned char)((a & 0xff00) >> 8)) #endif -#ifndef NUM_ENTRIES - #define NUM_ENTRIES(x) (sizeof(x)/sizeof((x)[0])) -#endif #ifndef __KERNEL__ #define __KERNEL__ diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 86dc21c728a..f0215f850d2 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -425,7 +425,7 @@ static int __init safe_init (void) if (vendor || product) { info ("vendor: %x product: %x\n", vendor, product); - for (i = 0; i < (sizeof (id_table) / sizeof (struct usb_device_id)); i++) { + for (i = 0; i < ARRAY_SIZE(id_table); i++) { if (!id_table[i].idVendor && !id_table[i].idProduct) { id_table[i].idVendor = vendor; id_table[i].idProduct = product; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 9e53ec75bcf..abb830cb77b 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -351,17 +351,14 @@ static int __init ti_init(void) int i,j; int ret; - /* insert extra vendor and product ids */ - j = sizeof(ti_id_table_3410)/sizeof(struct usb_device_id) - - TI_EXTRA_VID_PID_COUNT - 1; + j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1; for (i=0; i Date: Sat, 10 Dec 2005 20:30:54 +0200 Subject: [PATCH] USB: add driver for ATI/Philips USB RF remotes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Summary: Driver for ATI/Philips USB RF remotes This is a new input driver for ATI/Philips USB RF remotes (eg. ATI Remote Wonder II). Signed-off-by: Ville Syrjälä Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/Kconfig | 14 ++ drivers/usb/input/Makefile | 1 + drivers/usb/input/ati_remote2.c | 477 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 492 insertions(+) create mode 100644 drivers/usb/input/ati_remote2.c (limited to 'drivers') diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 1e53934907c..509dd0a04c5 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -273,6 +273,20 @@ config USB_ATI_REMOTE To compile this driver as a module, choose M here: the module will be called ati_remote. +config USB_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + depends on USB && INPUT + ---help--- + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + config USB_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 07cb17db42f..d512d9f488f 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -28,6 +28,7 @@ endif obj-$(CONFIG_USB_AIPTEK) += aiptek.o obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o +obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_HID) += usbhid.o obj-$(CONFIG_USB_KBD) += usbkbd.o obj-$(CONFIG_USB_KBTAB) += kbtab.o diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c new file mode 100644 index 00000000000..ab1a1ae24be --- /dev/null +++ b/drivers/usb/input/ati_remote2.c @@ -0,0 +1,477 @@ +/* + * ati_remote2 - ATI/Philips USB RF remote driver + * + * Copyright (C) 2005 Ville Syrjala + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include + +#define DRIVER_DESC "ATI/Philips USB RF remote driver" +#define DRIVER_VERSION "0.1" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR("Ville Syrjala "); +MODULE_LICENSE("GPL"); + +static unsigned int mode_mask = 0x1F; +module_param(mode_mask, uint, 0644); +MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); + +static struct usb_device_id ati_remote2_id_table[] = { + { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ + { } +}; +MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); + +static struct { + int hw_code; + int key_code; +} ati_remote2_key_table[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0c, KEY_POWER }, + { 0x0d, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x28, KEY_FORWARD }, + { 0x29, KEY_REWIND }, + { 0x2c, KEY_PLAY }, + { 0x30, KEY_PAUSE }, + { 0x31, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_DVD }, + { 0x39, KEY_TV }, + { 0x54, KEY_MENU }, + { 0x58, KEY_UP }, + { 0x59, KEY_DOWN }, + { 0x5a, KEY_LEFT }, + { 0x5b, KEY_RIGHT }, + { 0x5c, KEY_OK }, + { 0x78, KEY_A }, + { 0x79, KEY_B }, + { 0x7a, KEY_C }, + { 0x7b, KEY_D }, + { 0x7c, KEY_E }, + { 0x7d, KEY_F }, + { 0x82, KEY_ENTER }, + { 0x8e, KEY_VENDOR }, + { 0x96, KEY_COFFEE }, + { 0xa9, BTN_LEFT }, + { 0xaa, BTN_RIGHT }, + { 0xbe, KEY_QUESTION }, + { 0xd5, KEY_FRONT }, + { 0xd0, KEY_EDIT }, + { 0xf9, KEY_INFO }, + { (0x00 << 8) | 0x3f, KEY_PROG1 }, + { (0x01 << 8) | 0x3f, KEY_PROG2 }, + { (0x02 << 8) | 0x3f, KEY_PROG3 }, + { (0x03 << 8) | 0x3f, KEY_PROG4 }, + { (0x04 << 8) | 0x3f, KEY_PC }, + { 0, KEY_RESERVED } +}; + +struct ati_remote2 { + struct input_dev *idev; + struct usb_device *udev; + + struct usb_interface *intf[2]; + struct usb_endpoint_descriptor *ep[2]; + struct urb *urb[2]; + void *buf[2]; + dma_addr_t buf_dma[2]; + + unsigned long jiffies; + int mode; + + char name[64]; + char phys[64]; +}; + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote2_disconnect(struct usb_interface *interface); + +static struct usb_driver ati_remote2_driver = { + .name = "ati_remote2", + .probe = ati_remote2_probe, + .disconnect = ati_remote2_disconnect, + .id_table = ati_remote2_id_table, +}; + +static int ati_remote2_open(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + int r; + + r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); + if (r) { + usb_kill_urb(ar2->urb[0]); + dev_err(&ar2->intf[1]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + + return 0; +} + +static void ati_remote2_close(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + + usb_kill_urb(ar2->urb[0]); + usb_kill_urb(ar2->urb[1]); +} + +static void ati_remote2_input_mouse(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[0]; + + if (data[0] > 4) { + dev_err(&ar2->intf[0]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + input_regs(idev, regs); + input_event(idev, EV_REL, REL_X, (s8) data[1]); + input_event(idev, EV_REL, REL_Y, (s8) data[2]); + input_sync(idev); +} + +static int ati_remote2_lookup(unsigned int hw_code) +{ + int i; + + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + if (ati_remote2_key_table[i].hw_code == hw_code) + return i; + + return -1; +} + +static void ati_remote2_input_key(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[1]; + int hw_code, index; + + if (data[0] > 4) { + dev_err(&ar2->intf[1]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + hw_code = data[2]; + /* + * Mode keys (AUX1-AUX4, PC) all generate the same code byte. + * Use the mode byte to figure out which one was pressed. + */ + if (hw_code == 0x3f) { + /* + * For some incomprehensible reason the mouse pad generates + * events which look identical to the events from the last + * pressed mode key. Naturally we don't want to generate key + * events for the mouse pad so we filter out any subsequent + * events from the same mode key. + */ + if (ar2->mode == data[0]) + return; + + if (data[1] == 0) + ar2->mode = data[0]; + + hw_code |= data[0] << 8; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + index = ati_remote2_lookup(hw_code); + if (index < 0) { + dev_err(&ar2->intf[1]->dev, + "Unknown code byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + switch (data[1]) { + case 0: /* release */ + break; + case 1: /* press */ + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); + break; + case 2: /* repeat */ + + /* No repeat for mouse buttons. */ + if (ati_remote2_key_table[index].key_code == BTN_LEFT || + ati_remote2_key_table[index].key_code == BTN_RIGHT) + return; + + if (!time_after_eq(jiffies, ar2->jiffies)) + return; + + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); + break; + default: + dev_err(&ar2->intf[1]->dev, + "Unknown state byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + input_regs(idev, regs); + input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); + input_sync(idev); +} + +static void ati_remote2_complete_mouse(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_mouse(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[0]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static void ati_remote2_complete_key(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_key(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[1]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static int ati_remote2_input_init(struct ati_remote2 *ar2) +{ + struct input_dev *idev; + int i; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + ar2->idev = idev; + idev->private = ar2; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); + idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + set_bit(ati_remote2_key_table[i].key_code, idev->keybit); + + idev->rep[REP_DELAY] = 250; + idev->rep[REP_PERIOD] = 33; + + idev->open = ati_remote2_open; + idev->close = ati_remote2_close; + + idev->name = ar2->name; + idev->phys = ar2->phys; + + usb_to_input_id(ar2->udev, &idev->id); + idev->cdev.dev = &ar2->udev->dev; + + i = input_register_device(idev); + if (i) + input_free_device(idev); + + return i; +} + +static int ati_remote2_urb_init(struct ati_remote2 *ar2) +{ + struct usb_device *udev = ar2->udev; + int i, pipe, maxp; + + for (i = 0; i < 2; i++) { + ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); + if (!ar2->buf[i]) + return -ENOMEM; + + ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!ar2->urb[i]) + return -ENOMEM; + + pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = maxp > 4 ? 4 : maxp; + + usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, + i ? ati_remote2_complete_key : ati_remote2_complete_mouse, + ar2, ar2->ep[i]->bInterval); + ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; + ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + } + + return 0; +} + +static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) +{ + int i; + + for (i = 0; i < 2; i++) { + if (ar2->urb[i]) + usb_free_urb(ar2->urb[i]); + + if (ar2->buf[i]) + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + } +} + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *alt = interface->cur_altsetting; + struct ati_remote2 *ar2; + int r; + + if (alt->desc.bInterfaceNumber) + return -ENODEV; + + ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); + if (!ar2) + return -ENOMEM; + + ar2->udev = udev; + + ar2->intf[0] = interface; + ar2->ep[0] = &alt->endpoint[0].desc; + + ar2->intf[1] = usb_ifnum_to_if(udev, 1); + r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); + if (r) + goto fail1; + alt = ar2->intf[1]->cur_altsetting; + ar2->ep[1] = &alt->endpoint[0].desc; + + r = ati_remote2_urb_init(ar2); + if (r) + goto fail2; + + usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); + strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); + + strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); + + r = ati_remote2_input_init(ar2); + if (r) + goto fail2; + + usb_set_intfdata(interface, ar2); + + return 0; + + fail2: + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + fail1: + kfree(ar2); + + return r; +} + +static void ati_remote2_disconnect(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return; + + ar2 = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + input_unregister_device(ar2->idev); + + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + + kfree(ar2); +} + +static int __init ati_remote2_init(void) +{ + int r; + + r = usb_register(&ati_remote2_driver); + if (r) + printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); + else + printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); + + return r; +} + +static void __exit ati_remote2_exit(void) +{ + usb_deregister(&ati_remote2_driver); +} + +module_init(ati_remote2_init); +module_exit(ati_remote2_exit); -- cgit v1.2.3-70-g09d2 From effac8be4e46aabf22788d24caaa1ae9c295d26d Mon Sep 17 00:00:00 2001 From: Pavel Fedin Date: Fri, 9 Dec 2005 09:30:59 +0300 Subject: [PATCH] USB: Support for Posiflex PP-7000 retail printer in Linux This little patch adds recognition of Posiflex PP-7000 retail printer to ftdo_sio module. The printer uses FT232BM bridge programmed with custom VID/PID. The patch posted to lkml and sf.net was for 2.6.11.1 kernel, here is one reworked for 2.6.12. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 11da073da17..be8c29f6d56 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -477,6 +477,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, + { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 773ea3eca08..deab6661b5f 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -352,6 +352,12 @@ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.2.3-70-g09d2 From 740a4282ed5cf0fbcad9a1a1660f24e1b5d11ed2 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 13 Dec 2005 16:18:47 +0000 Subject: [PATCH] USB: ftdi_sio: new IDs for Teratronik devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds vendor and product IDs to the ftdi_sio driver's device ID table for two devices from teratronik.de. The device IDs were submitted by O. Wölfelschneider of Teratronik Elektronische Systeme GmbH. The charset of the patch is latin-1, same as the original files. Please apply, thanks! (I've tried to avoid a clash with Andrew Morton's patch to add support for Posiflex PP-7700 printer to the same driver.) Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 7 +++++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index be8c29f6d56..eb863b3f2d7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -471,6 +471,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index deab6661b5f..f380f9eaff7 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -342,6 +342,13 @@ #define XSENS_CONVERTER_6_PID 0xD38E #define XSENS_CONVERTER_7_PID 0xD38F +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + /* * Evolution Robotics products (http://www.evolution.com/). * Submitted by Shawn M. Lavelle. -- cgit v1.2.3-70-g09d2 From 0e8eb0f06b21bc05c42bcdbb6b273fce59ba9689 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 11 Dec 2005 20:34:02 +0100 Subject: [PATCH] USB: Remove unneeded kmalloc() return value casts Remove kmalloc() return value casts that we don't need from drivers/usb/* Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/media/usbvideo.c | 2 +- drivers/usb/media/w9968cf.c | 4 ++-- drivers/usb/misc/auerswald.c | 4 ++-- drivers/usb/misc/rio500.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/media/usbvideo.c b/drivers/usb/media/usbvideo.c index af0585906b2..4bd113325ef 100644 --- a/drivers/usb/media/usbvideo.c +++ b/drivers/usb/media/usbvideo.c @@ -725,7 +725,7 @@ int usbvideo_register( /* Allocate user_data separately because of kmalloc's limits */ if (num_extra > 0) { up->user_size = num_cams * num_extra; - up->user_data = (char *) kmalloc(up->user_size, GFP_KERNEL); + up->user_data = kmalloc(up->user_size, GFP_KERNEL); if (up->user_data == NULL) { err("%s: Failed to allocate user_data (%d. bytes)", __FUNCTION__, up->user_size); diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c index 8d6a1ff6595..04d69339c05 100644 --- a/drivers/usb/media/w9968cf.c +++ b/drivers/usb/media/w9968cf.c @@ -3554,7 +3554,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) /* Allocate 2 bytes of memory for camera control USB transfers */ - if (!(cam->control_buffer = (u16*)kmalloc(2, GFP_KERNEL))) { + if (!(cam->control_buffer = kmalloc(2, GFP_KERNEL))) { DBG(1,"Couldn't allocate memory for camera control transfers") err = -ENOMEM; goto fail; @@ -3562,7 +3562,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) memset(cam->control_buffer, 0, 2); /* Allocate 8 bytes of memory for USB data transfers to the FSB */ - if (!(cam->data_buffer = (u16*)kmalloc(8, GFP_KERNEL))) { + if (!(cam->data_buffer = kmalloc(8, GFP_KERNEL))) { DBG(1, "Couldn't allocate memory for data " "transfers to the FSB") err = -ENOMEM; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index fad387f2189..449b2501acf 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -767,7 +767,7 @@ static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned memset (bep, 0, sizeof (auerbuf_t)); bep->list = bcp; INIT_LIST_HEAD (&bep->buff_list); - bep->bufp = (char *) kmalloc (bufsize, GFP_KERNEL); + bep->bufp = kmalloc (bufsize, GFP_KERNEL); if (!bep->bufp) goto bl_fail; bep->dr = (struct usb_ctrlrequest *) kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL); @@ -1123,7 +1123,7 @@ static int auerswald_int_open (pauerswald_t cp) } } if (!cp->intbufp) { - cp->intbufp = (char *) kmalloc (irqsize, GFP_KERNEL); + cp->intbufp = kmalloc (irqsize, GFP_KERNEL); if (!cp->intbufp) { ret = -ENOMEM; goto intoend; diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index b9d66074b80..384fa376980 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -465,14 +465,14 @@ static int probe_rio(struct usb_interface *intf, rio->rio_dev = dev; - if (!(rio->obuf = (char *) kmalloc(OBUF_SIZE, GFP_KERNEL))) { + if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) { err("probe_rio: Not enough memory for the output buffer"); usb_deregister_dev(intf, &usb_rio_class); return -ENOMEM; } dbg("probe_rio: obuf address:%p", rio->obuf); - if (!(rio->ibuf = (char *) kmalloc(IBUF_SIZE, GFP_KERNEL))) { + if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) { err("probe_rio: Not enough memory for the input buffer"); usb_deregister_dev(intf, &usb_rio_class); kfree(rio->obuf); -- cgit v1.2.3-70-g09d2 From 6b495f4c5accec6261f522ea6898580dc9cb6316 Mon Sep 17 00:00:00 2001 From: Daniel Marjamäki Date: Tue, 13 Dec 2005 15:30:20 +0200 Subject: [PATCH] USB: isp116x-hcd.c: Removed unused variable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Removed unused variable Signed-off-by: Daniel Marjamäki Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 83447919202..584b8dc6511 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -154,13 +154,11 @@ static void pack_fifo(struct isp116x *isp116x) struct ptd *ptd; int buflen = isp116x->atl_last_dir == PTD_DIR_IN ? isp116x->atl_bufshrt : isp116x->atl_buflen; - int ptd_count = 0; isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT); isp116x_write_reg16(isp116x, HCXFERCTR, buflen); isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET); for (ep = isp116x->atl_active; ep; ep = ep->active) { - ++ptd_count; ptd = &ep->ptd; dump_ptd(ptd); dump_ptd_out_data(ptd, ep->data); -- cgit v1.2.3-70-g09d2 From 2c26c9e6b4993a1a1231849feff4b6518a4fc239 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 17 Dec 2005 02:16:43 -0800 Subject: [PATCH] USB: ub 00 implement retries and resets Implement command retries and resets in ub. It is advantageous for users to know if their devices are getting bad. However, failing every I/O is not practical if you have a external USB enclosure with a hard drive. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 404 +++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 287 insertions(+), 117 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index c7a28f5be42..ba05e31709d 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -9,7 +9,6 @@ * * TODO (sorted by decreasing priority) * -- Kill first_open (Al Viro fixed the block layer now) - * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries @@ -236,6 +235,13 @@ struct ub_scsi_cmd { void *back; }; +struct ub_request { + struct request *rq; + unsigned int current_try; + unsigned int nsg; /* sgv[nsg] */ + struct scatterlist sgv[UB_MAX_REQ_SG]; +}; + /* */ struct ub_capacity { @@ -331,6 +337,8 @@ struct ub_lun { int readonly; int first_open; /* Kludge. See ub_bd_open. */ + struct ub_request urq; + /* Use Ingo's mempool if or when we have more than one command. */ /* * Currently we never need more than one command for the whole device. @@ -351,6 +359,7 @@ struct ub_dev { atomic_t poison; /* The USB device is disconnected */ int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ + int reset; /* Reset is running */ unsigned int tagcnt; char name[12]; struct usb_device *dev; @@ -378,6 +387,9 @@ struct ub_dev { struct bulk_cs_wrap work_bcs; struct usb_ctrlrequest work_cr; + struct work_struct reset_work; + wait_queue_head_t reset_wait; + int sg_stat[6]; struct ub_scsi_trace tr; }; @@ -386,12 +398,14 @@ struct ub_dev { */ static void ub_cleanup(struct ub_dev *sc); static int ub_request_fn_1(struct ub_lun *lun, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq); +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_end_rq(struct request *rq, int uptodate); +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd); static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static void ub_urb_complete(struct urb *urb, struct pt_regs *pt); static void ub_scsi_action(unsigned long _dev); @@ -406,6 +420,8 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); +static void ub_reset_enter(struct ub_dev *sc); +static void ub_reset_task(void *arg); static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, struct ub_capacity *ret); @@ -517,6 +533,9 @@ static ssize_t ub_diag_show(struct device *dev, struct device_attribute *attr, cnt = 0; spin_lock_irqsave(&sc->lock, flags); + cnt += sprintf(page + cnt, + "poison %d reset %d\n", + atomic_read(&sc->poison), sc->reset); cnt += sprintf(page + cnt, "qlen %d qmax %d\n", sc->cmd_queue.qlen, sc->cmd_queue.qmax); @@ -766,7 +785,8 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) { struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; - int rc; + struct ub_request *urq; + int n_elem; if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); @@ -774,65 +794,70 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) return 0; } + if (lun->urq.rq != NULL) + return -1; if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); blkdev_dequeue_request(rq); + + urq = &lun->urq; + memset(urq, 0, sizeof(struct ub_request)); + urq->rq = rq; + + /* + * get scatterlist from block layer + */ + n_elem = blk_rq_map_sg(lun->disk->queue, rq, &urq->sgv[0]); + if (n_elem < 0) { + printk(KERN_INFO "%s: failed request map (%d)\n", + lun->name, n_elem); /* P3 */ + goto drop; + } + if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ + printk(KERN_WARNING "%s: request with %d segments\n", + lun->name, n_elem); + goto drop; + } + urq->nsg = n_elem; + sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + if (blk_pc_request(rq)) { - rc = ub_cmd_build_packet(sc, lun, cmd, rq); + ub_cmd_build_packet(sc, lun, cmd, urq); } else { - rc = ub_cmd_build_block(sc, lun, cmd, rq); - } - if (rc != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; + ub_cmd_build_block(sc, lun, cmd, urq); } cmd->state = UB_CMDST_INIT; cmd->lun = lun; cmd->done = ub_rw_cmd_done; - cmd->back = rq; + cmd->back = urq; cmd->tag = sc->tagcnt++; - if (ub_submit_scsi(sc, cmd) != 0) { - ub_put_cmd(lun, cmd); - ub_end_rq(rq, 0); - return 0; - } + if (ub_submit_scsi(sc, cmd) != 0) + goto drop; + + return 0; +drop: + ub_put_cmd(lun, cmd); + ub_end_rq(rq, 0); return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int ub_dir; - int n_elem; + struct request *rq = urq->rq; unsigned int block, nblks; if (rq_data_dir(rq) == WRITE) - ub_dir = UB_DIR_WRITE; + cmd->dir = UB_DIR_WRITE; else - ub_dir = UB_DIR_READ; - cmd->dir = ub_dir; + cmd->dir = UB_DIR_READ; - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem <= 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; /* request with no s/g entries? */ - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); /* * build the command @@ -843,7 +868,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, block = rq->sector >> lun->capacity.bshift; nblks = rq->nr_sectors >> lun->capacity.bshift; - cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; + cmd->cdb[0] = (cmd->dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ cmd->cdb[2] = block >> 24; cmd->cdb[3] = block >> 16; @@ -854,14 +879,12 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb_len = 10; cmd->len = rq->nr_sectors * 512; - - return 0; } -static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, - struct ub_scsi_cmd *cmd, struct request *rq) +static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct ub_request *urq) { - int n_elem; + struct request *rq = urq->rq; if (rq->data_len == 0) { cmd->dir = UB_DIR_NONE; @@ -870,40 +893,26 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, cmd->dir = UB_DIR_WRITE; else cmd->dir = UB_DIR_READ; - } - /* - * get scatterlist from block layer - */ - n_elem = blk_rq_map_sg(lun->disk->queue, rq, &cmd->sgv[0]); - if (n_elem < 0) { - printk(KERN_INFO "%s: failed request map (%d)\n", - sc->name, n_elem); /* P3 */ - return -1; - } - if (n_elem > UB_MAX_REQ_SG) { /* Paranoia */ - printk(KERN_WARNING "%s: request with %d segments\n", - sc->name, n_elem); - return -1; - } - cmd->nsg = n_elem; - sc->sg_stat[n_elem < 5 ? n_elem : 5]++; + cmd->nsg = urq->nsg; + memcpy(cmd->sgv, urq->sgv, sizeof(struct scatterlist) * cmd->nsg); memcpy(&cmd->cdb, rq->cmd, rq->cmd_len); cmd->cdb_len = rq->cmd_len; cmd->len = rq->data_len; - - return 0; } static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { - struct request *rq = cmd->back; struct ub_lun *lun = cmd->lun; + struct ub_request *urq = cmd->back; + struct request *rq; int uptodate; + rq = urq->rq; + if (cmd->error == 0) { uptodate = 1; @@ -924,9 +933,16 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rq->errors = SAM_STAT_CHECK_CONDITION; else rq->errors = DID_ERROR << 16; + } else { + if (cmd->error == -EIO) { + if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) + return; + } } } + urq->rq = NULL; + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(lun->disk->queue); @@ -941,6 +957,41 @@ static void ub_end_rq(struct request *rq, int uptodate) end_that_request_last(rq); } +static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, + struct ub_request *urq, struct ub_scsi_cmd *cmd) +{ + + if (atomic_read(&sc->poison)) + return -ENXIO; + + ub_reset_enter(sc); + + if (urq->current_try >= 3) + return -EIO; + urq->current_try++; + /* P3 */ printk("%s: dir %c len/act %d/%d " + "[sense %x %02x %02x] retry %d\n", + sc->name, UB_DIR_CHAR(cmd->dir), cmd->len, cmd->act_len, + cmd->key, cmd->asc, cmd->ascq, urq->current_try); + + memset(cmd, 0, sizeof(struct ub_scsi_cmd)); + ub_cmd_build_block(sc, lun, cmd, urq); + + cmd->state = UB_CMDST_INIT; + cmd->lun = lun; + cmd->done = ub_rw_cmd_done; + cmd->back = urq; + + cmd->tag = sc->tagcnt++; + +#if 0 /* Wasteful */ + return ub_submit_scsi(sc, cmd); +#else + ub_cmdq_add(sc, cmd); + return 0; +#endif +} + /* * Submit a regular SCSI operation (not an auto-sense). * @@ -1071,7 +1122,7 @@ static void ub_scsi_dispatch(struct ub_dev *sc) struct ub_scsi_cmd *cmd; int rc; - while ((cmd = ub_cmdq_peek(sc)) != NULL) { + while (!sc->reset && (cmd = ub_cmdq_peek(sc)) != NULL) { if (cmd->state == UB_CMDST_DONE) { ub_cmdq_pop(sc); (*cmd->done)(sc, cmd); @@ -1094,11 +1145,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct urb *urb = &sc->work_urb; struct bulk_cs_wrap *bcs; + int len; int rc; if (atomic_read(&sc->poison)) { - /* A little too simplistic, I feel... */ - goto Bad_End; + ub_state_done(sc, cmd, -ENODEV); + return; } if (cmd->state == UB_CMDST_CLEAR) { @@ -1106,7 +1158,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * STALL while clearning STALL. * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); @@ -1125,11 +1176,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLR2STS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1147,11 +1193,6 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else if (cmd->state == UB_CMDST_CLRRS) { if (urb->status == -EPIPE) { - /* - * STALL while clearning STALL. - * The control pipe clears itself - nothing to do. - * XXX Might try to reset the device here and retry. - */ printk(KERN_NOTICE "%s: stall on control pipe\n", sc->name); goto Bad_End; @@ -1168,7 +1209,12 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_stat_counted(sc, cmd); } else if (cmd->state == UB_CMDST_CMD) { - if (urb->status == -EPIPE) { + switch (urb->status) { + case 0: + break; + case -EOVERFLOW: + goto Bad_End; + case -EPIPE: rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " @@ -1178,17 +1224,20 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLEAR; ub_cmdtr_state(sc, cmd); return; - } - if (urb->status != 0) { + case -ESHUTDOWN: /* unplug */ + case -EILSEQ: /* unplug timeout on uhci */ + ub_state_done(sc, cmd, -ENODEV); + return; + default: goto Bad_End; } if (urb->actual_length != US_BULK_CB_WRAP_LEN) { - /* XXX Must do reset here to unconfuse the device */ goto Bad_End; } @@ -1207,11 +1256,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } cmd->state = UB_CMDST_CLR2STS; ub_cmdtr_state(sc, cmd); @@ -1220,14 +1266,50 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if (urb->status == -EOVERFLOW) { /* * A babble? Failure, but we must transfer CSW now. - * XXX This is going to end in perpetual babble. Reset. */ cmd->error = -EOVERFLOW; /* A cheap trick... */ ub_state_stat(sc, cmd); return; } - if (urb->status != 0) - goto Bad_End; + + if (cmd->dir == UB_DIR_WRITE) { + /* + * Do not continue writes in case of a failure. + * Doing so would cause sectors to be mixed up, + * which is worse than sectors lost. + * + * We must try to read the CSW, or many devices + * get confused. + */ + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + cmd->act_len += len; + ub_cmdtr_act_len(sc, cmd); + + cmd->error = -EIO; + ub_state_stat(sc, cmd); + return; + } + + } else { + /* + * If an error occurs on read, we record it, and + * continue to fetch data in order to avoid bubble. + * + * As a small shortcut, we stop if we detect that + * a CSW mixed into data. + */ + if (urb->status != 0) + cmd->error = -EIO; + + len = urb->actual_length; + if (urb->status != 0 || + len != cmd->sgv[cmd->current_sg].length) { + if ((len & 0x1FF) == US_BULK_CS_WRAP_LEN) + goto Bad_End; + } + } cmd->act_len += urb->actual_length; ub_cmdtr_act_len(sc, cmd); @@ -1245,11 +1327,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_NOTICE "%s: " "unable to submit clear (%d)\n", sc->name, rc); - /* - * This is typically ENOMEM or some other such shit. - * Retrying is pointless. Just do Bad End on it... - */ - goto Bad_End; + ub_state_done(sc, cmd, rc); + return; } /* @@ -1262,14 +1341,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_cmdtr_state(sc, cmd); return; } - if (urb->status == -EOVERFLOW) { - /* - * XXX We are screwed here. Retrying is pointless, - * because the pipelined data will not get in until - * we read with a big enough buffer. We must reset XXX. - */ - goto Bad_End; - } + + /* Catch everything, including -EOVERFLOW and other nasties. */ if (urb->status != 0) goto Bad_End; @@ -1315,15 +1388,15 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } - rc = le32_to_cpu(bcs->Residue); - if (rc != cmd->len - cmd->act_len) { + len = le32_to_cpu(bcs->Residue); + if (len != cmd->len - cmd->act_len) { /* * It is all right to transfer less, the caller has * to check. But it's not all right if the device * counts disagree with our counts. */ /* P3 */ printk("%s: resid %d len %d act %d\n", - sc->name, rc, cmd->len, cmd->act_len); + sc->name, len, cmd->len, cmd->act_len); goto Bad_End; } @@ -1334,13 +1407,13 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_sense(sc, cmd); return; case US_BULK_STAT_PHASE: - /* XXX We must reset the transport here */ /* P3 */ printk("%s: status PHASE\n", sc->name); goto Bad_End; default: printk(KERN_INFO "%s: unknown CSW status 0x%x\n", sc->name, bcs->Status); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } /* Not zeroing error to preserve a babble indicator */ @@ -1360,7 +1433,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) printk(KERN_WARNING "%s: " "wrong command state %d\n", sc->name, cmd->state); - goto Bad_End; + ub_state_done(sc, cmd, -EINVAL); + return; } return; @@ -1607,6 +1681,93 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) ub_scsi_urb_compl(sc, cmd); } +/* + * Reset management + */ + +static void ub_reset_enter(struct ub_dev *sc) +{ + + if (sc->reset) { + /* This happens often on multi-LUN devices. */ + return; + } + sc->reset = 1; + +#if 0 /* Not needed because the disconnect waits for us. */ + unsigned long flags; + spin_lock_irqsave(&ub_lock, flags); + sc->openc++; + spin_unlock_irqrestore(&ub_lock, flags); +#endif + +#if 0 /* We let them stop themselves. */ + struct list_head *p; + struct ub_lun *lun; + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_stop_queue(lun->disk->queue); + } +#endif + + schedule_work(&sc->reset_work); +} + +static void ub_reset_task(void *arg) +{ + struct ub_dev *sc = arg; + unsigned long flags; + struct list_head *p; + struct ub_lun *lun; + int lkr, rc; + + if (!sc->reset) { + printk(KERN_WARNING "%s: Running reset unrequested\n", + sc->name); + return; + } + + if (atomic_read(&sc->poison)) { + printk(KERN_NOTICE "%s: Not resetting disconnected device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else if (sc->dev->actconfig->desc.bNumInterfaces != 1) { + printk(KERN_NOTICE "%s: Not resetting multi-interface device\n", + sc->name); /* P3 This floods. Remove soon. XXX */ + } else { + if ((lkr = usb_lock_device_for_reset(sc->dev, sc->intf)) < 0) { + printk(KERN_NOTICE + "%s: usb_lock_device_for_reset failed (%d)\n", + sc->name, lkr); + } else { + rc = usb_reset_device(sc->dev); + if (rc < 0) { + printk(KERN_NOTICE "%s: " + "usb_lock_device_for_reset failed (%d)\n", + sc->name, rc); + } + + if (lkr) + usb_unlock_device(sc->dev); + } + } + + /* + * In theory, no commands can be running while reset is active, + * so nobody can ask for another reset, and so we do not need any + * queues of resets or anything. We do need a spinlock though, + * to interact with block layer. + */ + spin_lock_irqsave(&sc->lock, flags); + sc->reset = 0; + tasklet_schedule(&sc->tasklet); + list_for_each(p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + blk_start_queue(lun->disk->queue); + } + wake_up(&sc->reset_wait); + spin_unlock_irqrestore(&sc->lock, flags); +} + /* * This is called from a process context. */ @@ -2142,7 +2303,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, if (ep_in == NULL || ep_out == NULL) { printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name); - return -EIO; + return -ENODEV; } /* Calculate and store the pipe values */ @@ -2180,6 +2341,8 @@ static int ub_probe(struct usb_interface *intf, usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); + INIT_WORK(&sc->reset_work, ub_reset_task, sc); + init_waitqueue_head(&sc->reset_wait); init_timer(&sc->work_timer); sc->work_timer.data = (unsigned long) sc; @@ -2200,7 +2363,8 @@ static int ub_probe(struct usb_interface *intf, /* XXX Verify that we can handle the device (from descriptors) */ - ub_get_pipes(sc, sc->dev, intf); + if (ub_get_pipes(sc, sc->dev, intf) != 0) + goto err_dev_desc; if (device_create_file(&sc->intf->dev, &dev_attr_diag) != 0) goto err_diag; @@ -2271,6 +2435,7 @@ static int ub_probe(struct usb_interface *intf, /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ err_diag: +err_dev_desc: usb_set_intfdata(intf, NULL); // usb_put_intf(sc->intf); usb_put_dev(sc->dev); @@ -2378,6 +2543,11 @@ static void ub_disconnect(struct usb_interface *intf) */ atomic_set(&sc->poison, 1); + /* + * Wait for reset to end, if any. + */ + wait_event(sc->reset_wait, !sc->reset); + /* * Blow away queued commands. * @@ -2391,7 +2561,7 @@ static void ub_disconnect(struct usb_interface *intf) { struct ub_scsi_cmd *cmd; int cnt = 0; - while ((cmd = ub_cmdq_pop(sc)) != NULL) { + while ((cmd = ub_cmdq_peek(sc)) != NULL) { cmd->error = -ENOTCONN; cmd->state = UB_CMDST_DONE; ub_cmdtr_state(sc, cmd); -- cgit v1.2.3-70-g09d2 From 4fb729f5863c29e4466afb4508186303f46458e7 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 17 Dec 2005 02:34:12 -0800 Subject: [PATCH] USB: ub 01 rename Rename misleading UB_MINORS_PER_MAJOR into UB_PARTS_PER_LUN. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ba05e31709d..813805908de 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -115,7 +115,7 @@ /* */ -#define UB_MINORS_PER_MAJOR 8 +#define UB_PARTS_PER_LUN 8 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ @@ -2473,14 +2473,14 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum) ub_revalidate(sc, lun); rc = -ENOMEM; - if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL) + if ((disk = alloc_disk(UB_PARTS_PER_LUN)) == NULL) goto err_diskalloc; lun->disk = disk; sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a'); disk->major = UB_MAJOR; - disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; + disk->first_minor = lun->id * UB_PARTS_PER_LUN; disk->fops = &ub_bd_fops; disk->private_data = lun; disk->driverfs_dev = &sc->intf->dev; -- cgit v1.2.3-70-g09d2 From ab93091dd7f3d3dff9e8d1811d8344af1c52493b Mon Sep 17 00:00:00 2001 From: Daniel Marjamaki Date: Sat, 17 Dec 2005 02:38:46 -0800 Subject: [PATCH] USB: ub 02 Removed unused variable Removed an unused variable Signed-off-by: Daniel Marjamaki Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 813805908de..10740a06508 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -950,10 +950,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) static void ub_end_rq(struct request *rq, int uptodate) { - int rc; - - rc = end_that_request_first(rq, uptodate, rq->hard_nr_sectors); - // assert(rc == 0); + end_that_request_first(rq, uptodate, rq->hard_nr_sectors); end_that_request_last(rq); } -- cgit v1.2.3-70-g09d2 From 3e220e9505f3c993b666b5e22b1c466b69ee4f54 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 18 Dec 2005 21:30:02 -0800 Subject: [PATCH] USB Storage: Fix unusual_devs.h order Alan Stern pointed out there was an ordering issue in unusual_devs.h, and this patch fixes it. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7a865dd0468..dc301e567cf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -79,13 +79,6 @@ UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, US_SC_8070, US_PR_USBAT, init_usbat, 0), #endif -/* Patch submitted by Mihnea-Costin Grigore */ -UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, - "VIA Technologies Inc.", - "USB 2.0 Card Reader", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_RESIDUE ), - /* Reported by Sebastian Kapfer * and Olaf Hering (different bcd's, same vendor/product) * for USB floppies that need the SINGLE_LUN enforcement. @@ -96,6 +89,13 @@ UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), +/* Patch submitted by Mihnea-Costin Grigore */ +UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, + "VIA Technologies Inc.", + "USB 2.0 Card Reader", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Deduced by Jonathan Woithe * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. -- cgit v1.2.3-70-g09d2 From 5e0f76c6bbc0d26cd9625876f7beeb7b002f39bf Mon Sep 17 00:00:00 2001 From: David Hollis Date: Mon, 19 Dec 2005 13:58:38 -0500 Subject: [PATCH] USB: asix.c - Add Linksys USB200M Rev 2 ids Attached patch adds device IDs for the Linksys USB200M Rev 2 device which uses the AX88772 chipset. Signed-off-by: David Hollis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/asix.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 2faf2f2bdcd..54118169504 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -912,6 +912,10 @@ static const struct usb_device_id products [] = { // ASIX AX88772 10/100 USB_DEVICE (0x0b95, 0x7720), .driver_info = (unsigned long) &ax88772_info, +}, { + // Linksys USB200M Rev 2 + USB_DEVICE (0x13b1, 0x0018), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3-70-g09d2 From aafbf24a1129480157af7ee780eddcea9b76ee5c Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Tue, 20 Dec 2005 14:15:04 -0800 Subject: [PATCH] USB: replace __setup("nousb") with __module_param_call Fedora users complain that passing "nousbstorage" to the installer causes the rest of the USB support to disappear. The installer uses kernel command line as a way to pass options through Syslinux. The problem stems from the use of strncmp() in obsolete_checksetup(). I used __module_param_call() instead of module_param because I wanted to preserve the old syntax in grub.conf, and it's the only macro which allows to remove the prefix. The fix is tested to accept the option "nousb" correctly now. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 39e6b61b898..6ee2b5359a8 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -46,7 +46,6 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ - /* Not honored on modular build */ /** @@ -1096,18 +1095,8 @@ struct bus_type usb_bus_type = { .resume = usb_generic_resume, }; -#ifndef MODULE - -static int __init usb_setup_disable(char *str) -{ - nousb = 1; - return 1; -} - /* format to disable USB on kernel command line is: nousb */ -__setup("nousb", usb_setup_disable); - -#endif +__module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444); /* * for external read access to -- cgit v1.2.3-70-g09d2 From ff90651883093576de2d60bebaae39b0dd2e62f6 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 21 Dec 2005 19:27:29 +0100 Subject: [PATCH] USB: Limiting of resource use in skeleton driver this introduces limits whose lack in the skeleton driver someone recently complained about. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 60c458ebaa2..719d23a4ac5 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -39,10 +39,15 @@ MODULE_DEVICE_TABLE (usb, skel_table); /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 +/* our private defines. if this grows any larger, use your own .h file */ +#define MAX_TRANSFER ( PAGE_SIZE - 512 ) +#define WRITES_IN_FLIGHT 8 + /* Structure to hold all of our device specific stuff */ struct usb_skel { struct usb_device * udev; /* the usb device for this device */ struct usb_interface * interface; /* the interface for this device */ + struct semaphore limit_sem; /* limiting the number of writes in progress */ unsigned char * bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ @@ -152,6 +157,7 @@ static void skel_write_bulk_callback(struct urb *urb, struct pt_regs *regs) /* free up our allocated buffer */ usb_buffer_free(urb->dev, urb->transfer_buffer_length, urb->transfer_buffer, urb->transfer_dma); + up(&dev->limit_sem); } static ssize_t skel_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos) @@ -160,6 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; + size_t writesize = max(count, MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; @@ -167,6 +174,9 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou if (count == 0) goto exit; + /* limit the number of URBs in flight to stop a user from using up all RAM */ + down (&dev->limit_sem); + /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { @@ -174,13 +184,13 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto error; } - buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma); + buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL, &urb->transfer_dma); if (!buf) { retval = -ENOMEM; goto error; } - if (copy_from_user(buf, user_buffer, count)) { + if (copy_from_user(buf, user_buffer, writesize)) { retval = -EFAULT; goto error; } @@ -188,7 +198,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou /* initialize the urb properly */ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr), - buf, count, skel_write_bulk_callback, dev); + buf, writesize, skel_write_bulk_callback, dev); urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* send the data out the bulk port */ @@ -202,11 +212,12 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou usb_free_urb(urb); exit: - return count; + return writesize; error: - usb_buffer_free(dev->udev, count, buf, urb->transfer_dma); + usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma); usb_free_urb(urb); + up(&dev->limit_sem); return retval; } @@ -238,13 +249,13 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i int retval = -ENOMEM; /* allocate memory for our device state and initialize it */ - dev = kmalloc(sizeof(*dev), GFP_KERNEL); + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { err("Out of memory"); goto error; } - memset(dev, 0x00, sizeof(*dev)); kref_init(&dev->kref); + sema_init(&dev->limit_sem, WRITES_IN_FLIGHT); dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; -- cgit v1.2.3-70-g09d2 From a083dec0ed537a75fbe8f2f83d198e9e672240d8 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Sun, 18 Dec 2005 23:41:38 -0600 Subject: [PATCH] USB: zd1201: make sysfs device symlink Noticed that my zd1201 adapter isn't "seen" by hal and NetworkManager. The problem seems to be that unlike other network device drivers I checked, zd1201 does not do a SET_NETDEV_DEV(), which makes it so a "device" symlink is created under /sys/class/net/wlan0. With the following patch the device symlink shows up, and now I am happily using NetworkManager to control the adapter: $ ls -l /sys/class/net/wlan0 total 0 -r--r--r-- 1 root root 4096 Dec 18 13:42 address -r--r--r-- 1 root root 4096 Dec 18 13:42 addr_len -r--r--r-- 1 root root 4096 Dec 18 13:42 broadcast -r--r--r-- 1 root root 4096 Dec 18 13:42 carrier lrwxrwxrwx 1 root root 0 Dec 18 13:42 device -> ../../../devices/pci0001:10/0001:10:1b.1/usb4/4-1 -r--r--r-- 1 root root 4096 Dec 18 13:42 features Signed-off-by: Nathan Lynch Signed-off-by: Greg Kroah-Hartman --- drivers/usb/net/zd1201.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/net/zd1201.c b/drivers/usb/net/zd1201.c index 2af21a620c0..f3a8e2807c3 100644 --- a/drivers/usb/net/zd1201.c +++ b/drivers/usb/net/zd1201.c @@ -1829,6 +1829,8 @@ static int zd1201_probe(struct usb_interface *interface, if (err) goto err_net; + SET_NETDEV_DEV(zd->dev, &usb->dev); + err = register_netdev(zd->dev); if (err) goto err_net; -- cgit v1.2.3-70-g09d2 From 318e479eb7ad9a948c6da381976d258464413816 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 21 Dec 2005 17:03:24 -0800 Subject: [PATCH] USB: ioctl compat for usblp.c From: David Woodhouse David has a G5 with a printer. I am quite surprised that nobody else noticed this before. Linus has a G5. Hackers hate printing in general, maybe. We do not use BKL anymore, because one of code paths had a sleeping call, so we had to use a semaphore. I am sure it's safe to use unlocked_ioctl. The new ioctls return long and retval is int. It looks completely fine to me. We never want these extra bits, and the sign extension ought to work right. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman -- --- drivers/usb/class/usblp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 6918037e209..708a292e5a0 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -438,7 +438,7 @@ static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait | (!usblp->wcomplete ? 0 : POLLOUT | POLLWRNORM); } -static int usblp_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct usblp *usblp = file->private_data; int length, err, i; @@ -838,7 +838,8 @@ static struct file_operations usblp_fops = { .read = usblp_read, .write = usblp_write, .poll = usblp_poll, - .ioctl = usblp_ioctl, + .unlocked_ioctl = usblp_ioctl, + .compat_ioctl = usblp_ioctl, .open = usblp_open, .release = usblp_release, }; -- cgit v1.2.3-70-g09d2 From a9714c845c0681a203a9ae22aa5165ec72c51d33 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 23 Dec 2005 16:41:41 +0000 Subject: [PATCH] USB: Export IEEE-1284 device id in sysfs for usblp devices I looked at the userspace code which uses the LPIOC_GET_DEVICE_ID ioctl and I almost went blind. Let's export it in sysfs instead, and just as a string instead of with a big-endian length at the beginning of it. This also prints the message about finding the printer _after_ we know the minor device number it's going to have, rather than reporting all printers as 'usblp0'. Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 708a292e5a0..27e9404547f 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -850,6 +850,20 @@ static struct usb_class_driver usblp_class = { .minor_base = USBLP_MINOR_BASE, }; +static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usblp *usblp = usb_get_intfdata (intf); + + if (usblp->device_id_string[0] == 0 && + usblp->device_id_string[1] == 0) + return 0; + + return sprintf(buf, "%s", usblp->device_id_string+2); +} + +static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL); + static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -934,20 +948,12 @@ static int usblp_probe(struct usb_interface *intf, /* Retrieve and store the device ID string. */ usblp_cache_device_id_string(usblp); + device_create_file(&intf->dev, &dev_attr_ieee1284_id); #ifdef DEBUG usblp_check_status(usblp, 0); #endif - info("usblp%d: USB %sdirectional printer dev %d " - "if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X", - usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, - usblp->ifnum, - usblp->protocol[usblp->current_protocol].alt_setting, - usblp->current_protocol, - le16_to_cpu(usblp->dev->descriptor.idVendor), - le16_to_cpu(usblp->dev->descriptor.idProduct)); - usb_set_intfdata (intf, usblp); usblp->present = 1; @@ -958,11 +964,20 @@ static int usblp_probe(struct usb_interface *intf, goto abort_intfdata; } usblp->minor = intf->minor; + info("usblp%d: USB %sdirectional printer dev %d " + "if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X", + usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum, + usblp->ifnum, + usblp->protocol[usblp->current_protocol].alt_setting, + usblp->current_protocol, + le16_to_cpu(usblp->dev->descriptor.idVendor), + le16_to_cpu(usblp->dev->descriptor.idProduct)); return 0; abort_intfdata: usb_set_intfdata (intf, NULL); + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); abort: if (usblp) { if (usblp->writebuf) @@ -1157,6 +1172,8 @@ static void usblp_disconnect(struct usb_interface *intf) BUG (); } + device_remove_file(&intf->dev, &dev_attr_ieee1284_id); + down (&usblp_sem); down (&usblp->sem); usblp->present = 0; -- cgit v1.2.3-70-g09d2 From f5691d70d4aeec0ac9cff11f0cabb7d5a1735705 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Wed, 21 Dec 2005 17:24:54 -0800 Subject: [PATCH] USB: fix usb_find_interface for ppc64 Fix usb_find_interface. You cannot case pointers to int and long on a big-endian 64-bitter without consequences. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 6ee2b5359a8..56a3520863a 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -192,20 +192,23 @@ void usb_driver_release_interface(struct usb_driver *driver, iface->condition = USB_INTERFACE_UNBOUND; mark_quiesced(iface); } +struct find_interface_arg { + int minor; + struct usb_interface *interface; +}; static int __find_interface(struct device * dev, void * data) { - struct usb_interface ** ret = (struct usb_interface **)data; - struct usb_interface * intf = *ret; - int *minor = (int *)data; + struct find_interface_arg *arg = data; + struct usb_interface *intf; /* can't look at usb devices, only interfaces */ if (dev->driver == &usb_generic_driver) return 0; intf = to_usb_interface(dev); - if (intf->minor != -1 && intf->minor == *minor) { - *ret = intf; + if (intf->minor != -1 && intf->minor == arg->minor) { + arg->interface = intf; return 1; } return 0; @@ -222,12 +225,12 @@ static int __find_interface(struct device * dev, void * data) */ struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor) { - struct usb_interface *intf = (struct usb_interface *)(long)minor; - int ret; - - ret = driver_for_each_device(&drv->driver, NULL, &intf, __find_interface); + struct find_interface_arg argb; - return ret ? intf : NULL; + argb.minor = minor; + argb.interface = NULL; + driver_for_each_device(&drv->driver, NULL, &argb, __find_interface); + return argb.interface; } #ifdef CONFIG_HOTPLUG -- cgit v1.2.3-70-g09d2 From cb5b3f6950b4fbad9d8d41756f49aba792804b5b Mon Sep 17 00:00:00 2001 From: Olav Kongas Date: Thu, 22 Dec 2005 12:44:52 +0200 Subject: [PATCH] USB: fix buffer size limiting in skeleton driver Fix buffer size limiting. Signed-off-by: Olav Kongas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 719d23a4ac5..b6652ef5683 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -166,7 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; - size_t writesize = max(count, MAX_TRANSFER); + size_t writesize = min(count, MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; -- cgit v1.2.3-70-g09d2 From c8dd7709c534ab0d713aa698c99132b6c812b57c Mon Sep 17 00:00:00 2001 From: Sam Bishop Date: Thu, 22 Dec 2005 17:11:02 -0700 Subject: [PATCH] USB: fix usb-skeleton limit resource usage patch. Prevents a compiler warning and uses down_interruptible() instead of down() in process context. Signed-off-by: Sam Bishop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index b6652ef5683..5d02f16b7d0 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -166,7 +166,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou int retval = 0; struct urb *urb = NULL; char *buf = NULL; - size_t writesize = min(count, MAX_TRANSFER); + size_t writesize = min(count, (size_t)MAX_TRANSFER); dev = (struct usb_skel *)file->private_data; @@ -175,7 +175,10 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto exit; /* limit the number of URBs in flight to stop a user from using up all RAM */ - down (&dev->limit_sem); + if (down_interruptible(&dev->limit_sem)) { + retval = -ERESTARTSYS; + goto exit; + } /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From a020ff412f0ecbb1e4aae1681b287e5785dd77b5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 4 Jan 2006 18:01:03 +0000 Subject: [PATCH] Fix pragma packing in ip2 driver This fixes the pragma packing in the ip2 driver by popping the previous setting rather than explicitly assuming that the correct setting is 4. This also gets around a compiler bug in the FRV compiler when building allmodconfig. Signed-Off-By: David Howells Signed-off-by: Linus Torvalds --- drivers/char/ip2/i2pack.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/ip2/i2pack.h b/drivers/char/ip2/i2pack.h index e9b87a78622..00342a677c9 100644 --- a/drivers/char/ip2/i2pack.h +++ b/drivers/char/ip2/i2pack.h @@ -358,7 +358,7 @@ typedef struct _failStat #define MB_OUT_STRIPPED 0x40 // Board has read all output from fifo #define MB_FATAL_ERROR 0x20 // Board has encountered a fatal error -#pragma pack(4) // Reset padding to command-line default +#pragma pack() // Reset padding to command-line default #endif // I2PACK_H -- cgit v1.2.3-70-g09d2 From 034382117725f6b6b26fbb138498139c5c012c1b Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 11 Nov 2005 04:25:06 +0100 Subject: [PATCH] keep pnpbios usermod_helper away from hotplug_path[] These days we use udev to manage all kernel events. /proc/sys/kernel/hotplug will usually be disabled by an init-script. pnpnbios is not integrated with the driver core and should stay away from the now disabled /sbin/hotplug. Set the helper to /sbin/phpbios, even when there is probably no current user of this faciliy. If it's needed, it should definitely get proper driver core integration instead of forking binaries from the kernel. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/pnp/pnpbios/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c index f49674f0794..b154b3f52cb 100644 --- a/drivers/pnp/pnpbios/core.c +++ b/drivers/pnp/pnpbios/core.c @@ -56,7 +56,6 @@ #include #include #include -#include #include #include #include @@ -106,8 +105,6 @@ static int pnp_dock_event(int dock, struct pnp_docking_station_info *info) char *argv [3], **envp, *buf, *scratch; int i = 0, value; - if (!hotplug_path [0]) - return -ENOENT; if (!current->fs->root) { return -EAGAIN; } @@ -119,8 +116,9 @@ static int pnp_dock_event(int dock, struct pnp_docking_station_info *info) return -ENOMEM; } - /* only one standardized param to hotplug command: type */ - argv [0] = hotplug_path; + /* FIXME: if there are actual users of this, it should be integrated into + * the driver core and use the usual infrastructure like sysfs and uevents */ + argv [0] = "/sbin/pnpbios"; argv [1] = "dock"; argv [2] = NULL; -- cgit v1.2.3-70-g09d2 From 0296b2281352e4794e174b393c37f131502e09f0 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 11 Nov 2005 05:33:52 +0100 Subject: [PATCH] remove CONFIG_KOBJECT_UEVENT option It makes zero sense to have hotplug, but not the netlink events enabled today. Remove this option and merge the kobject_uevent.h header into the kobject.h header file. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 6 ----- drivers/input/input.c | 1 - drivers/s390/crypto/z90main.c | 1 - include/linux/kobject.h | 35 +++++++++++++++++++++++++- include/linux/kobject_uevent.h | 57 ------------------------------------------ init/Kconfig | 19 -------------- kernel/sysctl.c | 4 +-- lib/kobject_uevent.c | 24 ++++-------------- 8 files changed, 40 insertions(+), 107 deletions(-) delete mode 100644 include/linux/kobject_uevent.h (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 6af683025ae..b49a4ad3b87 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1476,12 +1476,6 @@ W: http://nfs.sourceforge.net/ W: http://www.cse.unsw.edu.au/~neilb/patches/linux-devel/ S: Maintained -KERNEL EVENT LAYER (KOBJECT_UEVENT) -P: Robert Love -M: rml@novell.com -L: linux-kernel@vger.kernel.org -S: Maintained - KEXEC P: Eric Biederman P: Randy Dunlap diff --git a/drivers/input/input.c b/drivers/input/input.c index bdd2a7fc268..43b49ccd7da 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/s390/crypto/z90main.c b/drivers/s390/crypto/z90main.c index 4010f2bb85a..790fcbb74b4 100644 --- a/drivers/s390/crypto/z90main.c +++ b/drivers/s390/crypto/z90main.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include #include "z90crypt.h" diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 7f7403aa4a4..baf5251d9f6 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -23,15 +23,31 @@ #include #include #include -#include #include #include #define KOBJ_NAME_LEN 20 +#define HOTPLUG_PATH_LEN 256 + +/* path to the userspace helper executed on an event */ +extern char hotplug_path[]; + /* counter to tag the hotplug event, read only except for the kobject core */ extern u64 hotplug_seqnum; +/* the actions here must match the proper string in lib/kobject_uevent.c */ +typedef int __bitwise kobject_action_t; +enum kobject_action { + KOBJ_ADD = (__force kobject_action_t) 0x01, /* add event, for hotplug */ + KOBJ_REMOVE = (__force kobject_action_t) 0x02, /* remove event, for hotplug */ + KOBJ_CHANGE = (__force kobject_action_t) 0x03, /* a sysfs attribute file has changed */ + KOBJ_MOUNT = (__force kobject_action_t) 0x04, /* mount event for block devices */ + KOBJ_UMOUNT = (__force kobject_action_t) 0x05, /* umount event for block devices */ + KOBJ_OFFLINE = (__force kobject_action_t) 0x06, /* offline event for hotplug devices */ + KOBJ_ONLINE = (__force kobject_action_t) 0x07, /* online event for hotplug devices */ +}; + struct kobject { const char * k_name; char name[KOBJ_NAME_LEN]; @@ -243,16 +259,33 @@ extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *); #ifdef CONFIG_HOTPLUG void kobject_hotplug(struct kobject *kobj, enum kobject_action action); + int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) __attribute__((format (printf, 7, 8))); + +int kobject_uevent(struct kobject *kobj, + enum kobject_action action, + struct attribute *attr); +int kobject_uevent_atomic(struct kobject *kobj, + enum kobject_action action, + struct attribute *attr); + #else static inline void kobject_hotplug(struct kobject *kobj, enum kobject_action action) { } static inline int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) { return 0; } +int kobject_uevent(struct kobject *kobj, + enum kobject_action action, + struct attribute *attr) +{ return 0; } +int kobject_uevent_atomic(struct kobject *kobj, + enum kobject_action action, + struct attribute *attr) +{ return 0; } #endif #endif /* __KERNEL__ */ diff --git a/include/linux/kobject_uevent.h b/include/linux/kobject_uevent.h deleted file mode 100644 index aa664fe7e56..00000000000 --- a/include/linux/kobject_uevent.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * kobject_uevent.h - list of kobject user events that can be generated - * - * Copyright (C) 2004 IBM Corp. - * Copyright (C) 2004 Greg Kroah-Hartman - * - * This file is released under the GPLv2. - * - */ - -#ifndef _KOBJECT_EVENT_H_ -#define _KOBJECT_EVENT_H_ - -#define HOTPLUG_PATH_LEN 256 - -/* path to the hotplug userspace helper executed on an event */ -extern char hotplug_path[]; - -/* - * If you add an action here, you must also add the proper string to the - * lib/kobject_uevent.c file. - */ -typedef int __bitwise kobject_action_t; -enum kobject_action { - KOBJ_ADD = (__force kobject_action_t) 0x01, /* add event, for hotplug */ - KOBJ_REMOVE = (__force kobject_action_t) 0x02, /* remove event, for hotplug */ - KOBJ_CHANGE = (__force kobject_action_t) 0x03, /* a sysfs attribute file has changed */ - KOBJ_MOUNT = (__force kobject_action_t) 0x04, /* mount event for block devices */ - KOBJ_UMOUNT = (__force kobject_action_t) 0x05, /* umount event for block devices */ - KOBJ_OFFLINE = (__force kobject_action_t) 0x06, /* offline event for hotplug devices */ - KOBJ_ONLINE = (__force kobject_action_t) 0x07, /* online event for hotplug devices */ -}; - - -#ifdef CONFIG_KOBJECT_UEVENT -int kobject_uevent(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr); -int kobject_uevent_atomic(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr); -#else -static inline int kobject_uevent(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr) -{ - return 0; -} -static inline int kobject_uevent_atomic(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr) -{ - return 0; -} -#endif - -#endif diff --git a/init/Kconfig b/init/Kconfig index 9fc0759fa94..0de8b7765ae 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -205,25 +205,6 @@ config HOTPLUG modules require HOTPLUG functionality, but a module built outside the kernel tree does. Such modules require Y here. -config KOBJECT_UEVENT - bool "Kernel Userspace Events" if EMBEDDED - depends on NET - default y - help - This option enables the kernel userspace event layer, which is a - simple mechanism for kernel-to-user communication over a netlink - socket. - The goal of the kernel userspace events layer is to provide a simple - and efficient events system, that notifies userspace about kobject - state changes. This will enable applications to just listen for - events instead of polling system devices and files. - Hotplug events (kobject addition and removal) are also available on - the netlink socket in addition to the execution of /sbin/hotplug if - CONFIG_HOTPLUG is enabled. - - Say Y, unless you are building a system requiring minimal memory - consumption. - config IKCONFIG bool "Kernel .config support" ---help--- diff --git a/kernel/sysctl.c b/kernel/sysctl.c index b53115b882e..6a51e25d446 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -83,9 +84,6 @@ static int ngroups_max = NGROUPS_MAX; #ifdef CONFIG_KMOD extern char modprobe_path[]; #endif -#ifdef CONFIG_HOTPLUG -extern char hotplug_path[]; -#endif #ifdef CONFIG_CHR_DEV_SG extern int sg_big_buff; #endif diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 3ab375411e3..1f90eea7eeb 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -19,14 +19,17 @@ #include #include #include -#include #include #include #define BUFFER_SIZE 1024 /* buffer for the hotplug env */ #define NUM_ENVP 32 /* number of env pointers */ -#if defined(CONFIG_KOBJECT_UEVENT) || defined(CONFIG_HOTPLUG) +#if defined(CONFIG_HOTPLUG) +char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug"; +u64 hotplug_seqnum; +static DEFINE_SPINLOCK(sequence_lock); + static char *action_to_string(enum kobject_action action) { switch (action) { @@ -48,9 +51,7 @@ static char *action_to_string(enum kobject_action action) return NULL; } } -#endif -#ifdef CONFIG_KOBJECT_UEVENT static struct sock *uevent_sock; /** @@ -168,21 +169,6 @@ static int __init kobject_uevent_init(void) postcore_initcall(kobject_uevent_init); -#else -static inline int send_uevent(const char *signal, const char *obj, - char **envp, int gfp_mask) -{ - return 0; -} - -#endif /* CONFIG_KOBJECT_UEVENT */ - - -#ifdef CONFIG_HOTPLUG -char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug"; -u64 hotplug_seqnum; -static DEFINE_SPINLOCK(sequence_lock); - /** * kobject_hotplug - notify userspace by executing /sbin/hotplug * -- cgit v1.2.3-70-g09d2 From 5f123fbd80f4f788554636f02bf73e40f914e0d6 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 11 Nov 2005 14:43:07 +0100 Subject: [PATCH] merge kobject_uevent and kobject_hotplug The distinction between hotplug and uevent does not make sense these days, netlink events are the default. udev depends entirely on netlink uevents. Only during early boot and in initramfs, /sbin/hotplug is needed. So merge the two functions and provide only one interface without all the options. The netlink layer got a nice generic interface with named slots recently, which is probably a better facility to plug events for subsystem specific events. Also the new poll() interface to /proc/mounts is a nicer way to notify about changes than sending events through the core. The uevents should only be used for driver core related requests to userspace now. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/ipr.c | 2 +- include/linux/kobject.h | 27 ++--- lib/kobject_uevent.c | 279 +++++++++++++++++------------------------------- 3 files changed, 102 insertions(+), 206 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index fa2cb3582cf..bf44a409ba0 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -2132,7 +2132,7 @@ restart: } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE, NULL); + kobject_hotplug(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE); LEAVE; } diff --git a/include/linux/kobject.h b/include/linux/kobject.h index e6926b32753..5b08248fba7 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -39,11 +39,11 @@ extern u64 hotplug_seqnum; /* the actions here must match the proper string in lib/kobject_uevent.c */ typedef int __bitwise kobject_action_t; enum kobject_action { - KOBJ_ADD = (__force kobject_action_t) 0x01, /* add event, for hotplug */ - KOBJ_REMOVE = (__force kobject_action_t) 0x02, /* remove event, for hotplug */ - KOBJ_CHANGE = (__force kobject_action_t) 0x03, /* a sysfs attribute file has changed */ - KOBJ_OFFLINE = (__force kobject_action_t) 0x04, /* offline event for hotplug devices */ - KOBJ_ONLINE = (__force kobject_action_t) 0x05, /* online event for hotplug devices */ + KOBJ_ADD = (__force kobject_action_t) 0x01, /* exclusive to core */ + KOBJ_REMOVE = (__force kobject_action_t) 0x02, /* exclusive to core */ + KOBJ_CHANGE = (__force kobject_action_t) 0x03, /* device state change */ + KOBJ_OFFLINE = (__force kobject_action_t) 0x04, /* device offline */ + KOBJ_ONLINE = (__force kobject_action_t) 0x05, /* device online */ }; struct kobject { @@ -262,28 +262,13 @@ int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) __attribute__((format (printf, 7, 8))); - -int kobject_uevent(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr); -int kobject_uevent_atomic(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr); - #else static inline void kobject_hotplug(struct kobject *kobj, enum kobject_action action) { } + static inline int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) { return 0; } -int kobject_uevent(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr) -{ return 0; } -int kobject_uevent_atomic(struct kobject *kobj, - enum kobject_action action, - struct attribute *attr) -{ return 0; } #endif #endif /* __KERNEL__ */ diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 845bf67d94c..dd061da3aba 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -29,6 +29,7 @@ char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug"; u64 hotplug_seqnum; static DEFINE_SPINLOCK(sequence_lock); +static struct sock *uevent_sock; static char *action_to_string(enum kobject_action action) { @@ -48,123 +49,6 @@ static char *action_to_string(enum kobject_action action) } } -static struct sock *uevent_sock; - -/** - * send_uevent - notify userspace by sending event through netlink socket - * - * @signal: signal name - * @obj: object path (kobject) - * @envp: possible hotplug environment to pass with the message - * @gfp_mask: - */ -static int send_uevent(const char *signal, const char *obj, - char **envp, gfp_t gfp_mask) -{ - struct sk_buff *skb; - char *pos; - int len; - - if (!uevent_sock) - return -EIO; - - len = strlen(signal) + 1; - len += strlen(obj) + 1; - - /* allocate buffer with the maximum possible message size */ - skb = alloc_skb(len + BUFFER_SIZE, gfp_mask); - if (!skb) - return -ENOMEM; - - pos = skb_put(skb, len); - sprintf(pos, "%s@%s", signal, obj); - - /* copy the environment key by key to our continuous buffer */ - if (envp) { - int i; - - for (i = 2; envp[i]; i++) { - len = strlen(envp[i]) + 1; - pos = skb_put(skb, len); - strcpy(pos, envp[i]); - } - } - - NETLINK_CB(skb).dst_group = 1; - return netlink_broadcast(uevent_sock, skb, 0, 1, gfp_mask); -} - -static int do_kobject_uevent(struct kobject *kobj, enum kobject_action action, - struct attribute *attr, gfp_t gfp_mask) -{ - char *path; - char *attrpath; - char *signal; - int len; - int rc = -ENOMEM; - - path = kobject_get_path(kobj, gfp_mask); - if (!path) - return -ENOMEM; - - signal = action_to_string(action); - if (!signal) - return -EINVAL; - - if (attr) { - len = strlen(path); - len += strlen(attr->name) + 2; - attrpath = kmalloc(len, gfp_mask); - if (!attrpath) - goto exit; - sprintf(attrpath, "%s/%s", path, attr->name); - rc = send_uevent(signal, attrpath, NULL, gfp_mask); - kfree(attrpath); - } else - rc = send_uevent(signal, path, NULL, gfp_mask); - -exit: - kfree(path); - return rc; -} - -/** - * kobject_uevent - notify userspace by sending event through netlink socket - * - * @signal: signal name - * @kobj: struct kobject that the event is happening to - * @attr: optional struct attribute the event belongs to - */ -int kobject_uevent(struct kobject *kobj, enum kobject_action action, - struct attribute *attr) -{ - return do_kobject_uevent(kobj, action, attr, GFP_KERNEL); -} -EXPORT_SYMBOL_GPL(kobject_uevent); - -int kobject_uevent_atomic(struct kobject *kobj, enum kobject_action action, - struct attribute *attr) -{ - return do_kobject_uevent(kobj, action, attr, GFP_ATOMIC); -} -EXPORT_SYMBOL_GPL(kobject_uevent_atomic); - -static int __init kobject_uevent_init(void) -{ - uevent_sock = netlink_kernel_create(NETLINK_KOBJECT_UEVENT, 1, NULL, - THIS_MODULE); - - if (!uevent_sock) { - printk(KERN_ERR - "kobject_uevent: unable to create netlink socket!\n"); - return -ENODEV; - } - - return 0; -} - -postcore_initcall(kobject_uevent_init); - /** * kobject_hotplug - notify userspace by executing /sbin/hotplug * @@ -173,95 +57,84 @@ postcore_initcall(kobject_uevent_init); */ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) { - char *argv [3]; - char **envp = NULL; - char *buffer = NULL; - char *seq_buff; + char **envp; + char *buffer; char *scratch; + const char *action_string; + const char *devpath = NULL; + const char *subsystem; + struct kobject *top_kobj; + struct kset *kset; + struct kset_hotplug_ops *hotplug_ops; + u64 seq; + char *seq_buff; int i = 0; int retval; - char *kobj_path = NULL; - const char *name = NULL; - char *action_string; - u64 seq; - struct kobject *top_kobj = kobj; - struct kset *kset; - static struct kset_hotplug_ops null_hotplug_ops; - struct kset_hotplug_ops *hotplug_ops = &null_hotplug_ops; - /* If this kobj does not belong to a kset, - try to find a parent that does. */ + pr_debug("%s\n", __FUNCTION__); + + action_string = action_to_string(action); + if (!action_string) + return; + + /* search the kset we belong to */ + top_kobj = kobj; if (!top_kobj->kset && top_kobj->parent) { do { top_kobj = top_kobj->parent; } while (!top_kobj->kset && top_kobj->parent); } - - if (top_kobj->kset) - kset = top_kobj->kset; - else + if (!top_kobj->kset) return; - if (kset->hotplug_ops) - hotplug_ops = kset->hotplug_ops; + kset = top_kobj->kset; + hotplug_ops = kset->hotplug_ops; - /* If the kset has a filter operation, call it. - Skip the event, if the filter returns zero. */ - if (hotplug_ops->filter) { + /* skip the event, if the filter returns zero. */ + if (hotplug_ops && hotplug_ops->filter) if (!hotplug_ops->filter(kset, kobj)) return; - } - - pr_debug ("%s\n", __FUNCTION__); - - action_string = action_to_string(action); - if (!action_string) - return; - envp = kmalloc(NUM_ENVP * sizeof (char *), GFP_KERNEL); + /* environment index */ + envp = kzalloc(NUM_ENVP * sizeof (char *), GFP_KERNEL); if (!envp) return; - memset (envp, 0x00, NUM_ENVP * sizeof (char *)); + /* environment values */ buffer = kmalloc(BUFFER_SIZE, GFP_KERNEL); if (!buffer) goto exit; - if (hotplug_ops->name) - name = hotplug_ops->name(kset, kobj); - if (name == NULL) - name = kobject_name(&kset->kobj); + /* complete object path */ + devpath = kobject_get_path(kobj, GFP_KERNEL); + if (!devpath) + goto exit; - argv [0] = hotplug_path; - argv [1] = (char *)name; /* won't be changed but 'const' has to go */ - argv [2] = NULL; + /* originating subsystem */ + if (hotplug_ops && hotplug_ops->name) + subsystem = hotplug_ops->name(kset, kobj); + else + subsystem = kobject_name(&kset->kobj); - /* minimal command environment */ - envp [i++] = "HOME=/"; - envp [i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + /* event environemnt for helper process only */ + envp[i++] = "HOME=/"; + envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + /* default keys */ scratch = buffer; - envp [i++] = scratch; scratch += sprintf(scratch, "ACTION=%s", action_string) + 1; - - kobj_path = kobject_get_path(kobj, GFP_KERNEL); - if (!kobj_path) - goto exit; - envp [i++] = scratch; - scratch += sprintf (scratch, "DEVPATH=%s", kobj_path) + 1; - + scratch += sprintf (scratch, "DEVPATH=%s", devpath) + 1; envp [i++] = scratch; - scratch += sprintf(scratch, "SUBSYSTEM=%s", name) + 1; + scratch += sprintf(scratch, "SUBSYSTEM=%s", subsystem) + 1; - /* reserve space for the sequence, - * put the real one in after the hotplug call */ + /* just reserve the space, overwrite it after kset call has returned */ envp[i++] = seq_buff = scratch; scratch += strlen("SEQNUM=18446744073709551616") + 1; - if (hotplug_ops->hotplug) { - /* have the kset specific function add its stuff */ + /* let the kset specific function add its stuff */ + if (hotplug_ops && hotplug_ops->hotplug) { retval = hotplug_ops->hotplug (kset, kobj, &envp[i], NUM_ENVP - i, scratch, BUFFER_SIZE - (scratch - buffer)); @@ -272,27 +145,49 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) } } + /* we will send an event, request a new sequence number */ spin_lock(&sequence_lock); seq = ++hotplug_seqnum; spin_unlock(&sequence_lock); sprintf(seq_buff, "SEQNUM=%llu", (unsigned long long)seq); - pr_debug ("%s: %s %s seq=%llu %s %s %s %s %s\n", - __FUNCTION__, argv[0], argv[1], (unsigned long long)seq, - envp[0], envp[1], envp[2], envp[3], envp[4]); - - send_uevent(action_string, kobj_path, envp, GFP_KERNEL); + /* send netlink message */ + if (uevent_sock) { + struct sk_buff *skb; + size_t len; + + /* allocate message with the maximum possible size */ + len = strlen(action_string) + strlen(devpath) + 2; + skb = alloc_skb(len + BUFFER_SIZE, GFP_KERNEL); + if (skb) { + /* add header */ + scratch = skb_put(skb, len); + sprintf(scratch, "%s@%s", action_string, devpath); + + /* copy keys to our continuous event payload buffer */ + for (i = 2; envp[i]; i++) { + len = strlen(envp[i]) + 1; + scratch = skb_put(skb, len); + strcpy(scratch, envp[i]); + } + + NETLINK_CB(skb).dst_group = 1; + netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); + } + } - if (!hotplug_path[0]) - goto exit; + /* call uevent_helper, usually only enabled during early boot */ + if (hotplug_path[0]) { + char *argv [3]; - retval = call_usermodehelper (argv[0], argv, envp, 0); - if (retval) - pr_debug ("%s - call_usermodehelper returned %d\n", - __FUNCTION__, retval); + argv [0] = hotplug_path; + argv [1] = (char *)subsystem; + argv [2] = NULL; + call_usermodehelper (argv[0], argv, envp, 0); + } exit: - kfree(kobj_path); + kfree(devpath); kfree(buffer); kfree(envp); return; @@ -350,4 +245,20 @@ int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, } EXPORT_SYMBOL(add_hotplug_env_var); +static int __init kobject_uevent_init(void) +{ + uevent_sock = netlink_kernel_create(NETLINK_KOBJECT_UEVENT, 1, NULL, + THIS_MODULE); + + if (!uevent_sock) { + printk(KERN_ERR + "kobject_uevent: unable to create netlink socket!\n"); + return -ENODEV; + } + + return 0; +} + +postcore_initcall(kobject_uevent_init); + #endif /* CONFIG_HOTPLUG */ -- cgit v1.2.3-70-g09d2 From 312c004d36ce6c739512bac83b452f4c20ab1f62 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 16 Nov 2005 09:00:00 +0100 Subject: [PATCH] driver core: replace "hotplug" by "uevent" Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- Documentation/powerpc/eeh-pci-error-recovery.txt | 31 ++++----- arch/powerpc/kernel/vio.c | 2 +- block/genhd.c | 48 ++++++------- drivers/acpi/container.c | 8 +-- drivers/acpi/processor_core.c | 8 +-- drivers/acpi/scan.c | 14 ++-- drivers/base/Kconfig | 4 +- drivers/base/class.c | 66 +++++++++--------- drivers/base/core.c | 42 ++++++------ drivers/base/cpu.c | 4 +- drivers/base/firmware_class.c | 45 ++++++------- drivers/base/memory.c | 12 ++-- drivers/ieee1394/nodemgr.c | 20 +++--- drivers/infiniband/core/sysfs.c | 16 ++--- drivers/input/input.c | 14 ++-- drivers/input/serio/serio.c | 22 +++--- drivers/macintosh/macio_asic.c | 4 +- drivers/mmc/mmc_sysfs.c | 4 +- drivers/pci/hotplug.c | 44 ++++++------ drivers/pci/pci-driver.c | 6 +- drivers/pci/pci.h | 4 +- drivers/pcmcia/cs.c | 10 +-- drivers/pcmcia/ds.c | 50 +++++++------- drivers/scsi/ipr.c | 2 +- drivers/usb/core/usb.c | 86 +++++++++++------------- drivers/usb/host/hc_crisv10.c | 2 +- drivers/w1/w1.c | 14 ++-- fs/partitions/check.c | 6 +- include/linux/device.h | 14 ++-- include/linux/firmware.h | 2 +- include/linux/kobject.h | 40 ++++++----- include/linux/sysctl.h | 2 +- include/linux/usb.h | 2 +- kernel/ksysfs.c | 14 ++-- kernel/sysctl.c | 4 +- lib/kobject.c | 4 +- lib/kobject_uevent.c | 64 +++++++++--------- net/bluetooth/hci_sysfs.c | 4 +- net/bridge/br_sysfs_if.c | 4 +- net/core/net-sysfs.c | 8 +-- 40 files changed, 372 insertions(+), 378 deletions(-) (limited to 'drivers') diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index e75d7474322..67a11a36270 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -115,7 +115,7 @@ Current PPC64 Linux EEH Implementation At this time, a generic EEH recovery mechanism has been implemented, so that individual device drivers do not need to be modified to support EEH recovery. This generic mechanism piggy-backs on the PCI hotplug -infrastructure, and percolates events up through the hotplug/udev +infrastructure, and percolates events up through the userspace/udev infrastructure. Followiing is a detailed description of how this is accomplished. @@ -172,7 +172,7 @@ A handler for the EEH notifier_block events is implemented in drivers/pci/hotplug/pSeries_pci.c, called handle_eeh_events(). It saves the device BAR's and then calls rpaphp_unconfig_pci_adapter(). This last call causes the device driver for the card to be stopped, -which causes hotplug events to go out to user space. This triggers +which causes uevents to go out to user space. This triggers user-space scripts that might issue commands such as "ifdown eth0" for ethernet cards, and so on. This handler then sleeps for 5 seconds, hoping to give the user-space scripts enough time to complete. @@ -258,29 +258,30 @@ rpa_php_unconfig_pci_adapter() { // in rpaphp_pci.c calls pci_destroy_dev (struct pci_dev *) { calls - device_unregister (&dev->dev) { // in /drivers/base/core.c + device_unregister (&dev->dev) { // in /drivers/base/core.c calls - device_del(struct device * dev) { // in /drivers/base/core.c + device_del(struct device * dev) { // in /drivers/base/core.c calls - kobject_del() { //in /libs/kobject.c + kobject_del() { //in /libs/kobject.c calls - kobject_hotplug() { // in /libs/kobject.c + kobject_uevent() { // in /libs/kobject.c calls - kset_hotplug() { // in /lib/kobject.c + kset_uevent() { // in /lib/kobject.c calls - kset->hotplug_ops->hotplug() which is really just + kset->uevent_ops->uevent() // which is really just a call to - dev_hotplug() { // in /drivers/base/core.c + dev_uevent() { // in /drivers/base/core.c calls - dev->bus->hotplug() which is really just a call to - pci_hotplug () { // in drivers/pci/hotplug.c + dev->bus->uevent() which is really just a call to + pci_uevent () { // in drivers/pci/hotplug.c which prints device name, etc.... } } - then kset_hotplug() calls - call_usermodehelper () with - argv[0]=hotplug_path[] which is "/sbin/hotplug" - --> event to userspace, + then kobject_uevent() sends a netlink uevent to userspace + --> userspace uevent + (during early boot, nobody listens to netlink events and + kobject_uevent() executes uevent_helper[], which runs the + event process /sbin/hotplug) } } kobject_del() then calls sysfs_remove_dir(), which would diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 71a6addf9f7..13c41495fe0 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -293,6 +293,6 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp, struct bus_type vio_bus_type = { .name = "vio", - .hotplug = vio_hotplug, + .uevent = vio_hotplug, .match = vio_bus_match, }; diff --git a/block/genhd.c b/block/genhd.c index f04609d553b..f1ed83f3f08 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -358,7 +358,7 @@ static struct sysfs_ops disk_sysfs_ops = { static ssize_t disk_uevent_store(struct gendisk * disk, const char *buf, size_t count) { - kobject_hotplug(&disk->kobj, KOBJ_ADD); + kobject_uevent(&disk->kobj, KOBJ_ADD); return count; } static ssize_t disk_dev_read(struct gendisk * disk, char *page) @@ -455,14 +455,14 @@ static struct kobj_type ktype_block = { extern struct kobj_type ktype_part; -static int block_hotplug_filter(struct kset *kset, struct kobject *kobj) +static int block_uevent_filter(struct kset *kset, struct kobject *kobj) { struct kobj_type *ktype = get_ktype(kobj); return ((ktype == &ktype_block) || (ktype == &ktype_part)); } -static int block_hotplug(struct kset *kset, struct kobject *kobj, char **envp, +static int block_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { struct kobj_type *ktype = get_ktype(kobj); @@ -474,40 +474,40 @@ static int block_hotplug(struct kset *kset, struct kobject *kobj, char **envp, if (ktype == &ktype_block) { disk = container_of(kobj, struct gendisk, kobj); - add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, - &length, "MINOR=%u", disk->first_minor); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "MINOR=%u", disk->first_minor); } else if (ktype == &ktype_part) { disk = container_of(kobj->parent, struct gendisk, kobj); part = container_of(kobj, struct hd_struct, kobj); - add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, - &length, "MINOR=%u", - disk->first_minor + part->partno); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "MINOR=%u", + disk->first_minor + part->partno); } else return 0; - add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, &length, - "MAJOR=%u", disk->major); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, + "MAJOR=%u", disk->major); /* add physical device, backing this device */ physdev = disk->driverfs_dev; if (physdev) { char *path = kobject_get_path(&physdev->kobj, GFP_KERNEL); - add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, - &length, "PHYSDEVPATH=%s", path); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "PHYSDEVPATH=%s", path); kfree(path); if (physdev->bus) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVBUS=%s", - physdev->bus->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVBUS=%s", + physdev->bus->name); if (physdev->driver) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVDRIVER=%s", - physdev->driver->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVDRIVER=%s", + physdev->driver->name); } /* terminate, set to next free slot, shrink available space */ @@ -520,13 +520,13 @@ static int block_hotplug(struct kset *kset, struct kobject *kobj, char **envp, return 0; } -static struct kset_hotplug_ops block_hotplug_ops = { - .filter = block_hotplug_filter, - .hotplug = block_hotplug, +static struct kset_uevent_ops block_uevent_ops = { + .filter = block_uevent_filter, + .uevent = block_uevent, }; /* declare block_subsys. */ -static decl_subsys(block, &ktype_block, &block_hotplug_ops); +static decl_subsys(block, &ktype_block, &block_uevent_ops); /* diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 27ec12c1fab..b69a8cad82b 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -172,21 +172,21 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context) if (ACPI_FAILURE(status) || !device) { result = container_device_add(&device, handle); if (!result) - kobject_hotplug(&device->kobj, - KOBJ_ONLINE); + kobject_uevent(&device->kobj, + KOBJ_ONLINE); else printk("Failed to add container\n"); } } else { if (ACPI_SUCCESS(status)) { /* device exist and this is a remove request */ - kobject_hotplug(&device->kobj, KOBJ_OFFLINE); + kobject_uevent(&device->kobj, KOBJ_OFFLINE); } } break; case ACPI_NOTIFY_EJECT_REQUEST: if (!acpi_bus_get_device(handle, &device) && device) { - kobject_hotplug(&device->kobj, KOBJ_OFFLINE); + kobject_uevent(&device->kobj, KOBJ_OFFLINE); } break; default: diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 0c561c571f2..1278aca96fe 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -748,7 +748,7 @@ int acpi_processor_device_add(acpi_handle handle, struct acpi_device **device) return_VALUE(-ENODEV); if ((pr->id >= 0) && (pr->id < NR_CPUS)) { - kobject_hotplug(&(*device)->kobj, KOBJ_ONLINE); + kobject_uevent(&(*device)->kobj, KOBJ_ONLINE); } return_VALUE(0); } @@ -788,13 +788,13 @@ acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) } if (pr->id >= 0 && (pr->id < NR_CPUS)) { - kobject_hotplug(&device->kobj, KOBJ_OFFLINE); + kobject_uevent(&device->kobj, KOBJ_OFFLINE); break; } result = acpi_processor_start(device); if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) { - kobject_hotplug(&device->kobj, KOBJ_ONLINE); + kobject_uevent(&device->kobj, KOBJ_ONLINE); } else { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Device [%s] failed to start\n", @@ -818,7 +818,7 @@ acpi_processor_hotplug_notify(acpi_handle handle, u32 event, void *data) } if ((pr->id < NR_CPUS) && (cpu_present(pr->id))) - kobject_hotplug(&device->kobj, KOBJ_OFFLINE); + kobject_uevent(&device->kobj, KOBJ_OFFLINE); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 31218e1d2a1..0745d20afb8 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -78,7 +78,7 @@ static struct kobj_type ktype_acpi_ns = { .release = acpi_device_release, }; -static int namespace_hotplug(struct kset *kset, struct kobject *kobj, +static int namespace_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { @@ -89,8 +89,8 @@ static int namespace_hotplug(struct kset *kset, struct kobject *kobj, if (!dev->driver) return 0; - if (add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, &len, - "PHYSDEVDRIVER=%s", dev->driver->name)) + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len, + "PHYSDEVDRIVER=%s", dev->driver->name)) return -ENOMEM; envp[i] = NULL; @@ -98,8 +98,8 @@ static int namespace_hotplug(struct kset *kset, struct kobject *kobj, return 0; } -static struct kset_hotplug_ops namespace_hotplug_ops = { - .hotplug = &namespace_hotplug, +static struct kset_uevent_ops namespace_uevent_ops = { + .uevent = &namespace_uevent, }; static struct kset acpi_namespace_kset = { @@ -108,7 +108,7 @@ static struct kset acpi_namespace_kset = { }, .subsys = &acpi_subsys, .ktype = &ktype_acpi_ns, - .hotplug_ops = &namespace_hotplug_ops, + .uevent_ops = &namespace_uevent_ops, }; static void acpi_device_register(struct acpi_device *device, @@ -347,7 +347,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) } /* -------------------------------------------------------------------------- - ACPI hotplug sysfs device file support + ACPI sysfs device file support -------------------------------------------------------------------------- */ static ssize_t acpi_eject_store(struct acpi_device *device, const char *buf, size_t count); diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 934149c1512..f0eff3dac58 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -19,11 +19,11 @@ config PREVENT_FIRMWARE_BUILD If unsure say Y here. config FW_LOADER - tristate "Hotplug firmware loading support" + tristate "Userspace firmware loading support" select HOTPLUG ---help--- This option is provided for the case where no in-kernel-tree modules - require hotplug firmware loading support, but a module built outside + require userspace firmware loading support, but a module built outside the kernel tree does. config DEBUG_DRIVER diff --git a/drivers/base/class.c b/drivers/base/class.c index db65fd0babe..df7fdabd073 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -178,7 +178,7 @@ static void class_device_create_release(struct class_device *class_dev) } /* needed to allow these devices to have parent class devices */ -static int class_device_create_hotplug(struct class_device *class_dev, +static int class_device_create_uevent(struct class_device *class_dev, char **envp, int num_envp, char *buffer, int buffer_size) { @@ -331,7 +331,7 @@ static struct kobj_type ktype_class_device = { .release = class_dev_release, }; -static int class_hotplug_filter(struct kset *kset, struct kobject *kobj) +static int class_uevent_filter(struct kset *kset, struct kobject *kobj) { struct kobj_type *ktype = get_ktype(kobj); @@ -343,14 +343,14 @@ static int class_hotplug_filter(struct kset *kset, struct kobject *kobj) return 0; } -static const char *class_hotplug_name(struct kset *kset, struct kobject *kobj) +static const char *class_uevent_name(struct kset *kset, struct kobject *kobj) { struct class_device *class_dev = to_class_dev(kobj); return class_dev->class->name; } -static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp, +static int class_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { struct class_device *class_dev = to_class_dev(kobj); @@ -365,29 +365,29 @@ static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp, struct device *dev = class_dev->dev; char *path = kobject_get_path(&dev->kobj, GFP_KERNEL); - add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, - &length, "PHYSDEVPATH=%s", path); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "PHYSDEVPATH=%s", path); kfree(path); if (dev->bus) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVBUS=%s", dev->bus->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVBUS=%s", dev->bus->name); if (dev->driver) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVDRIVER=%s", dev->driver->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVDRIVER=%s", dev->driver->name); } if (MAJOR(class_dev->devt)) { - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MAJOR=%u", MAJOR(class_dev->devt)); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MAJOR=%u", MAJOR(class_dev->devt)); - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MINOR=%u", MINOR(class_dev->devt)); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MINOR=%u", MINOR(class_dev->devt)); } /* terminate, set to next free slot, shrink available space */ @@ -397,30 +397,30 @@ static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp, buffer = &buffer[length]; buffer_size -= length; - if (class_dev->hotplug) { + if (class_dev->uevent) { /* have the class device specific function add its stuff */ - retval = class_dev->hotplug(class_dev, envp, num_envp, + retval = class_dev->uevent(class_dev, envp, num_envp, buffer, buffer_size); if (retval) - pr_debug("class_dev->hotplug() returned %d\n", retval); - } else if (class_dev->class->hotplug) { + pr_debug("class_dev->uevent() returned %d\n", retval); + } else if (class_dev->class->uevent) { /* have the class specific function add its stuff */ - retval = class_dev->class->hotplug(class_dev, envp, num_envp, + retval = class_dev->class->uevent(class_dev, envp, num_envp, buffer, buffer_size); if (retval) - pr_debug("class->hotplug() returned %d\n", retval); + pr_debug("class->uevent() returned %d\n", retval); } return retval; } -static struct kset_hotplug_ops class_hotplug_ops = { - .filter = class_hotplug_filter, - .name = class_hotplug_name, - .hotplug = class_hotplug, +static struct kset_uevent_ops class_uevent_ops = { + .filter = class_uevent_filter, + .name = class_uevent_name, + .uevent = class_uevent, }; -static decl_subsys(class_obj, &ktype_class_device, &class_hotplug_ops); +static decl_subsys(class_obj, &ktype_class_device, &class_uevent_ops); static int class_device_add_attrs(struct class_device * cd) @@ -464,7 +464,7 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf) static ssize_t store_uevent(struct class_device *class_dev, const char *buf, size_t count) { - kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + kobject_uevent(&class_dev->kobj, KOBJ_ADD); return count; } @@ -559,7 +559,7 @@ int class_device_add(struct class_device *class_dev) class_name); } - kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + kobject_uevent(&class_dev->kobj, KOBJ_ADD); /* notify any interfaces this device is now here */ if (parent_class) { @@ -632,7 +632,7 @@ struct class_device *class_device_create(struct class *cls, class_dev->class = cls; class_dev->parent = parent; class_dev->release = class_device_create_release; - class_dev->hotplug = class_device_create_hotplug; + class_dev->uevent = class_device_create_uevent; va_start(args, fmt); vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args); @@ -674,7 +674,7 @@ void class_device_del(struct class_device *class_dev) class_device_remove_file(class_dev, class_dev->devt_attr); class_device_remove_attrs(class_dev); - kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE); + kobject_uevent(&class_dev->kobj, KOBJ_REMOVE); kobject_del(&class_dev->kobj); class_device_put(parent_device); diff --git a/drivers/base/core.c b/drivers/base/core.c index 8615b42b517..fd8059920db 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -90,7 +90,7 @@ static struct kobj_type ktype_device = { }; -static int dev_hotplug_filter(struct kset *kset, struct kobject *kobj) +static int dev_uevent_filter(struct kset *kset, struct kobject *kobj) { struct kobj_type *ktype = get_ktype(kobj); @@ -102,14 +102,14 @@ static int dev_hotplug_filter(struct kset *kset, struct kobject *kobj) return 0; } -static const char *dev_hotplug_name(struct kset *kset, struct kobject *kobj) +static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj) { struct device *dev = to_dev(kobj); return dev->bus->name; } -static int dev_hotplug(struct kset *kset, struct kobject *kobj, char **envp, +static int dev_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { struct device *dev = to_dev(kobj); @@ -119,15 +119,15 @@ static int dev_hotplug(struct kset *kset, struct kobject *kobj, char **envp, /* add bus name of physical device */ if (dev->bus) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVBUS=%s", dev->bus->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVBUS=%s", dev->bus->name); /* add driver name of physical device */ if (dev->driver) - add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PHYSDEVDRIVER=%s", dev->driver->name); + add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PHYSDEVDRIVER=%s", dev->driver->name); /* terminate, set to next free slot, shrink available space */ envp[i] = NULL; @@ -136,11 +136,11 @@ static int dev_hotplug(struct kset *kset, struct kobject *kobj, char **envp, buffer = &buffer[length]; buffer_size -= length; - if (dev->bus && dev->bus->hotplug) { + if (dev->bus && dev->bus->uevent) { /* have the bus specific function add its stuff */ - retval = dev->bus->hotplug (dev, envp, num_envp, buffer, buffer_size); + retval = dev->bus->uevent(dev, envp, num_envp, buffer, buffer_size); if (retval) { - pr_debug ("%s - hotplug() returned %d\n", + pr_debug ("%s - uevent() returned %d\n", __FUNCTION__, retval); } } @@ -148,16 +148,16 @@ static int dev_hotplug(struct kset *kset, struct kobject *kobj, char **envp, return retval; } -static struct kset_hotplug_ops device_hotplug_ops = { - .filter = dev_hotplug_filter, - .name = dev_hotplug_name, - .hotplug = dev_hotplug, +static struct kset_uevent_ops device_uevent_ops = { + .filter = dev_uevent_filter, + .name = dev_uevent_name, + .uevent = dev_uevent, }; static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - kobject_hotplug(&dev->kobj, KOBJ_ADD); + kobject_uevent(&dev->kobj, KOBJ_ADD); return count; } @@ -165,7 +165,7 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr, * device_subsys - structure to be registered with kobject core. */ -decl_subsys(devices, &ktype_device, &device_hotplug_ops); +decl_subsys(devices, &ktype_device, &device_uevent_ops); /** @@ -274,7 +274,7 @@ int device_add(struct device *dev) dev->uevent_attr.store = store_uevent; device_create_file(dev, &dev->uevent_attr); - kobject_hotplug(&dev->kobj, KOBJ_ADD); + kobject_uevent(&dev->kobj, KOBJ_ADD); if ((error = device_pm_add(dev))) goto PMError; if ((error = bus_add_device(dev))) @@ -291,7 +291,7 @@ int device_add(struct device *dev) BusError: device_pm_remove(dev); PMError: - kobject_hotplug(&dev->kobj, KOBJ_REMOVE); + kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); Error: if (parent) @@ -374,7 +374,7 @@ void device_del(struct device * dev) platform_notify_remove(dev); bus_remove_device(dev); device_pm_remove(dev); - kobject_hotplug(&dev->kobj, KOBJ_REMOVE); + kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); if (parent) put_device(parent); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index a95844790f7..281d26784d2 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -41,14 +41,14 @@ static ssize_t store_online(struct sys_device *dev, const char *buf, case '0': ret = cpu_down(cpu->sysdev.id); if (!ret) - kobject_hotplug(&dev->kobj, KOBJ_OFFLINE); + kobject_uevent(&dev->kobj, KOBJ_OFFLINE); break; case '1': ret = smp_prepare_cpu(cpu->sysdev.id); if (!ret) ret = cpu_up(cpu->sysdev.id); if (!ret) - kobject_hotplug(&dev->kobj, KOBJ_ONLINE); + kobject_uevent(&dev->kobj, KOBJ_ONLINE); break; default: ret = -EINVAL; diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 59dacb6552c..5b3d5e9ddcb 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -85,17 +85,17 @@ firmware_timeout_store(struct class *class, const char *buf, size_t count) static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store); static void fw_class_dev_release(struct class_device *class_dev); -int firmware_class_hotplug(struct class_device *dev, char **envp, +int firmware_class_uevent(struct class_device *dev, char **envp, int num_envp, char *buffer, int buffer_size); static struct class firmware_class = { .name = "firmware", - .hotplug = firmware_class_hotplug, + .uevent = firmware_class_uevent, .release = fw_class_dev_release, }; int -firmware_class_hotplug(struct class_device *class_dev, char **envp, +firmware_class_uevent(struct class_device *class_dev, char **envp, int num_envp, char *buffer, int buffer_size) { struct firmware_priv *fw_priv = class_get_devdata(class_dev); @@ -104,13 +104,12 @@ firmware_class_hotplug(struct class_device *class_dev, char **envp, if (!test_bit(FW_STATUS_READY, &fw_priv->status)) return -ENODEV; - if (add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, &len, - "FIRMWARE=%s", fw_priv->fw_id)) + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len, + "FIRMWARE=%s", fw_priv->fw_id)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, &len, - "TIMEOUT=%i", loading_timeout)) + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len, + "TIMEOUT=%i", loading_timeout)) return -ENOMEM; - envp[i] = NULL; return 0; @@ -352,7 +351,7 @@ error_kfree: static int fw_setup_class_device(struct firmware *fw, struct class_device **class_dev_p, - const char *fw_name, struct device *device, int hotplug) + const char *fw_name, struct device *device, int uevent) { struct class_device *class_dev; struct firmware_priv *fw_priv; @@ -384,7 +383,7 @@ fw_setup_class_device(struct firmware *fw, struct class_device **class_dev_p, goto error_unreg; } - if (hotplug) + if (uevent) set_bit(FW_STATUS_READY, &fw_priv->status); else set_bit(FW_STATUS_READY_NOHOTPLUG, &fw_priv->status); @@ -399,7 +398,7 @@ out: static int _request_firmware(const struct firmware **firmware_p, const char *name, - struct device *device, int hotplug) + struct device *device, int uevent) { struct class_device *class_dev; struct firmware_priv *fw_priv; @@ -418,19 +417,19 @@ _request_firmware(const struct firmware **firmware_p, const char *name, } retval = fw_setup_class_device(firmware, &class_dev, name, device, - hotplug); + uevent); if (retval) goto error_kfree_fw; fw_priv = class_get_devdata(class_dev); - if (hotplug) { + if (uevent) { if (loading_timeout > 0) { fw_priv->timeout.expires = jiffies + loading_timeout * HZ; add_timer(&fw_priv->timeout); } - kobject_hotplug(&class_dev->kobj, KOBJ_ADD); + kobject_uevent(&class_dev->kobj, KOBJ_ADD); wait_for_completion(&fw_priv->completion); set_bit(FW_STATUS_DONE, &fw_priv->status); del_timer_sync(&fw_priv->timeout); @@ -456,7 +455,7 @@ out: } /** - * request_firmware: - request firmware to hotplug and wait for it + * request_firmware: - send firmware request and wait for it * @firmware_p: pointer to firmware image * @name: name of firmware file * @device: device for which firmware is being loaded @@ -466,7 +465,7 @@ out: * * Should be called from user context where sleeping is allowed. * - * @name will be used as $FIRMWARE in the hotplug environment and + * @name will be used as $FIRMWARE in the uevent environment and * should be distinctive enough not to be confused with any other * firmware image for this or any other device. **/ @@ -474,8 +473,8 @@ int request_firmware(const struct firmware **firmware_p, const char *name, struct device *device) { - int hotplug = 1; - return _request_firmware(firmware_p, name, device, hotplug); + int uevent = 1; + return _request_firmware(firmware_p, name, device, uevent); } /** @@ -518,7 +517,7 @@ struct firmware_work { struct device *device; void *context; void (*cont)(const struct firmware *fw, void *context); - int hotplug; + int uevent; }; static int @@ -533,7 +532,7 @@ request_firmware_work_func(void *arg) } daemonize("%s/%s", "firmware", fw_work->name); ret = _request_firmware(&fw, fw_work->name, fw_work->device, - fw_work->hotplug); + fw_work->uevent); if (ret < 0) fw_work->cont(NULL, fw_work->context); else { @@ -548,7 +547,7 @@ request_firmware_work_func(void *arg) /** * request_firmware_nowait: asynchronous version of request_firmware * @module: module requesting the firmware - * @hotplug: invokes hotplug event to copy the firmware image if this flag + * @uevent: sends uevent to copy the firmware image if this flag * is non-zero else the firmware copy must be done manually. * @name: name of firmware file * @device: device for which firmware is being loaded @@ -562,7 +561,7 @@ request_firmware_work_func(void *arg) **/ int request_firmware_nowait( - struct module *module, int hotplug, + struct module *module, int uevent, const char *name, struct device *device, void *context, void (*cont)(const struct firmware *fw, void *context)) { @@ -583,7 +582,7 @@ request_firmware_nowait( .device = device, .context = context, .cont = cont, - .hotplug = hotplug, + .uevent = uevent, }; ret = kernel_thread(request_firmware_work_func, fw_work, diff --git a/drivers/base/memory.c b/drivers/base/memory.c index bc3ca6a656b..7e1d077874d 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -29,12 +29,12 @@ static struct sysdev_class memory_sysdev_class = { set_kset_name(MEMORY_CLASS_NAME), }; -static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj) +static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj) { return MEMORY_CLASS_NAME; } -static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp, +static int memory_uevent(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size) { int retval = 0; @@ -42,9 +42,9 @@ static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp, return retval; } -static struct kset_hotplug_ops memory_hotplug_ops = { - .name = memory_hotplug_name, - .hotplug = memory_hotplug, +static struct kset_uevent_ops memory_uevent_ops = { + .name = memory_uevent_name, + .uevent = memory_uevent, }; static struct notifier_block *memory_chain; @@ -431,7 +431,7 @@ int __init memory_dev_init(void) unsigned int i; int ret; - memory_sysdev_class.kset.hotplug_ops = &memory_hotplug_ops; + memory_sysdev_class.kset.uevent_ops = &memory_uevent_ops; ret = sysdev_class_register(&memory_sysdev_class); /* diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 0ea37b1bccb..f2453668acf 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -121,8 +121,8 @@ struct host_info { }; static int nodemgr_bus_match(struct device * dev, struct device_driver * drv); -static int nodemgr_hotplug(struct class_device *cdev, char **envp, int num_envp, - char *buffer, int buffer_size); +static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, + char *buffer, int buffer_size); static void nodemgr_resume_ne(struct node_entry *ne); static void nodemgr_remove_ne(struct node_entry *ne); static struct node_entry *find_entry_by_guid(u64 guid); @@ -162,7 +162,7 @@ static void ud_cls_release(struct class_device *class_dev) static struct class nodemgr_ud_class = { .name = "ieee1394", .release = ud_cls_release, - .hotplug = nodemgr_hotplug, + .uevent = nodemgr_uevent, }; static struct hpsb_highlevel nodemgr_highlevel; @@ -966,7 +966,7 @@ static struct unit_directory *nodemgr_process_unit_directory if (ud_child == NULL) break; - /* inherit unspecified values so hotplug picks it up */ + /* inherit unspecified values, the driver core picks it up */ if ((ud->flags & UNIT_DIRECTORY_MODEL_ID) && !(ud_child->flags & UNIT_DIRECTORY_MODEL_ID)) { @@ -1062,8 +1062,8 @@ static void nodemgr_process_root_directory(struct host_info *hi, struct node_ent #ifdef CONFIG_HOTPLUG -static int nodemgr_hotplug(struct class_device *cdev, char **envp, int num_envp, - char *buffer, int buffer_size) +static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, + char *buffer, int buffer_size) { struct unit_directory *ud; int i = 0; @@ -1112,8 +1112,8 @@ do { \ #else -static int nodemgr_hotplug(struct class_device *cdev, char **envp, int num_envp, - char *buffer, int buffer_size) +static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp, + char *buffer, int buffer_size) { return -ENODEV; } @@ -1618,8 +1618,8 @@ static int nodemgr_host_thread(void *__hi) /* Scan our nodes to get the bus options and create node * entries. This does not do the sysfs stuff, since that - * would trigger hotplug callbacks and such, which is a - * bad idea at this point. */ + * would trigger uevents and such, which is a bad idea at + * this point. */ nodemgr_node_scan(hi, generation); /* This actually does the full probe, with sysfs diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 08648b1a387..1f1743c5c9a 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -434,24 +434,24 @@ static void ib_device_release(struct class_device *cdev) kfree(dev); } -static int ib_device_hotplug(struct class_device *cdev, char **envp, - int num_envp, char *buf, int size) +static int ib_device_uevent(struct class_device *cdev, char **envp, + int num_envp, char *buf, int size) { struct ib_device *dev = container_of(cdev, struct ib_device, class_dev); int i = 0, len = 0; - if (add_hotplug_env_var(envp, num_envp, &i, buf, size, &len, - "NAME=%s", dev->name)) + if (add_uevent_var(envp, num_envp, &i, buf, size, &len, + "NAME=%s", dev->name)) return -ENOMEM; /* - * It might be nice to pass the node GUID to hotplug, but + * It might be nice to pass the node GUID with the event, but * right now the only way to get it is to query the device * provider, and this can crash during device removal because * we are will be running after driver removal has started. * We could add a node_guid field to struct ib_device, or we - * could just let the hotplug script read the node GUID from - * sysfs when devices are added. + * could just let userspace read the node GUID from sysfs when + * devices are added. */ envp[i] = NULL; @@ -653,7 +653,7 @@ static struct class_device_attribute *ib_class_attributes[] = { static struct class ib_class = { .name = "infiniband", .release = ib_device_release, - .hotplug = ib_device_hotplug, + .uevent = ib_device_uevent, }; int ib_device_register_sysfs(struct ib_device *device) diff --git a/drivers/input/input.c b/drivers/input/input.c index 43b49ccd7da..2d37b394e38 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -610,10 +610,10 @@ static void input_dev_release(struct class_device *class_dev) } /* - * Input hotplugging interface - loading event handlers based on + * Input uevent interface - loading event handlers based on * device bitfields. */ -static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index, +static int input_add_uevent_bm_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *name, unsigned long *bitmap, int max) { @@ -638,7 +638,7 @@ static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index, #define INPUT_ADD_HOTPLUG_VAR(fmt, val...) \ do { \ - int err = add_hotplug_env_var(envp, num_envp, &i, \ + int err = add_uevent_var(envp, num_envp, &i, \ buffer, buffer_size, &len, \ fmt, val); \ if (err) \ @@ -647,15 +647,15 @@ static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index, #define INPUT_ADD_HOTPLUG_BM_VAR(name, bm, max) \ do { \ - int err = input_add_hotplug_bm_var(envp, num_envp, &i, \ + int err = input_add_uevent_bm_var(envp, num_envp, &i, \ buffer, buffer_size, &len, \ name, bm, max); \ if (err) \ return err; \ } while (0) -static int input_dev_hotplug(struct class_device *cdev, char **envp, - int num_envp, char *buffer, int buffer_size) +static int input_dev_uevent(struct class_device *cdev, char **envp, + int num_envp, char *buffer, int buffer_size) { struct input_dev *dev = to_input_dev(cdev); int i = 0; @@ -697,7 +697,7 @@ static int input_dev_hotplug(struct class_device *cdev, char **envp, struct class input_class = { .name = "input", .release = input_dev_release, - .hotplug = input_dev_hotplug, + .uevent = input_dev_uevent, }; struct input_dev *input_allocate_device(void) diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index fbb69ef6a77..8e530cc970e 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -800,16 +800,16 @@ static int serio_bus_match(struct device *dev, struct device_driver *drv) #ifdef CONFIG_HOTPLUG -#define SERIO_ADD_HOTPLUG_VAR(fmt, val...) \ +#define SERIO_ADD_UEVENT_VAR(fmt, val...) \ do { \ - int err = add_hotplug_env_var(envp, num_envp, &i, \ + int err = add_uevent_var(envp, num_envp, &i, \ buffer, buffer_size, &len, \ fmt, val); \ if (err) \ return err; \ } while (0) -static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) +static int serio_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { struct serio *serio; int i = 0; @@ -820,21 +820,21 @@ static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *bu serio = to_serio_port(dev); - SERIO_ADD_HOTPLUG_VAR("SERIO_TYPE=%02x", serio->id.type); - SERIO_ADD_HOTPLUG_VAR("SERIO_PROTO=%02x", serio->id.proto); - SERIO_ADD_HOTPLUG_VAR("SERIO_ID=%02x", serio->id.id); - SERIO_ADD_HOTPLUG_VAR("SERIO_EXTRA=%02x", serio->id.extra); - SERIO_ADD_HOTPLUG_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X", + SERIO_ADD_UEVENT_VAR("SERIO_TYPE=%02x", serio->id.type); + SERIO_ADD_UEVENT_VAR("SERIO_PROTO=%02x", serio->id.proto); + SERIO_ADD_UEVENT_VAR("SERIO_ID=%02x", serio->id.id); + SERIO_ADD_UEVENT_VAR("SERIO_EXTRA=%02x", serio->id.extra); + SERIO_ADD_UEVENT_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X", serio->id.type, serio->id.proto, serio->id.id, serio->id.extra); envp[i] = NULL; return 0; } -#undef SERIO_ADD_HOTPLUG_VAR +#undef SERIO_ADD_UEVENT_VAR #else -static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) +static int serio_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { return -ENODEV; } @@ -908,7 +908,7 @@ static int __init serio_init(void) serio_bus.dev_attrs = serio_device_attrs; serio_bus.drv_attrs = serio_driver_attrs; serio_bus.match = serio_bus_match; - serio_bus.hotplug = serio_hotplug; + serio_bus.uevent = serio_uevent; serio_bus.resume = serio_resume; bus_register(&serio_bus); diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index c34c96d1890..228e1852a83 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -128,7 +128,7 @@ static int macio_device_resume(struct device * dev) return 0; } -static int macio_hotplug (struct device *dev, char **envp, int num_envp, +static int macio_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { struct macio_dev * macio_dev; @@ -203,7 +203,7 @@ extern struct device_attribute macio_dev_attrs[]; struct bus_type macio_bus_type = { .name = "macio", .match = macio_bus_match, - .hotplug = macio_hotplug, + .uevent = macio_uevent, .suspend = macio_device_suspend, .resume = macio_device_resume, .dev_attrs = macio_dev_attrs, diff --git a/drivers/mmc/mmc_sysfs.c b/drivers/mmc/mmc_sysfs.c index 3f4a66ca955..ec701667abf 100644 --- a/drivers/mmc/mmc_sysfs.c +++ b/drivers/mmc/mmc_sysfs.c @@ -80,7 +80,7 @@ static int mmc_bus_match(struct device *dev, struct device_driver *drv) } static int -mmc_bus_hotplug(struct device *dev, char **envp, int num_envp, char *buf, +mmc_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf, int buf_size) { struct mmc_card *card = dev_to_mmc_card(dev); @@ -140,7 +140,7 @@ static struct bus_type mmc_bus_type = { .name = "mmc", .dev_attrs = mmc_dev_attrs, .match = mmc_bus_match, - .hotplug = mmc_bus_hotplug, + .uevent = mmc_bus_uevent, .suspend = mmc_bus_suspend, .resume = mmc_bus_resume, }; diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c index e1743be3190..1c97e7dd130 100644 --- a/drivers/pci/hotplug.c +++ b/drivers/pci/hotplug.c @@ -3,8 +3,8 @@ #include #include "pci.h" -int pci_hotplug (struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) +int pci_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) { struct pci_dev *pdev; int i = 0; @@ -17,34 +17,34 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp, if (!pdev) return -ENODEV; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PCI_CLASS=%04X", pdev->class)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PCI_CLASS=%04X", pdev->class)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PCI_ID=%04X:%04X", pdev->vendor, pdev->device)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PCI_ID=%04X:%04X", pdev->vendor, pdev->device)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, - pdev->subsystem_device)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, + pdev->subsystem_device)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PCI_SLOT_NAME=%s", pci_name(pdev))) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PCI_SLOT_NAME=%s", pci_name(pdev))) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x", - pdev->vendor, pdev->device, - pdev->subsystem_vendor, pdev->subsystem_device, - (u8)(pdev->class >> 16), (u8)(pdev->class >> 8), - (u8)(pdev->class))) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device, + (u8)(pdev->class >> 16), (u8)(pdev->class >> 8), + (u8)(pdev->class))) return -ENOMEM; envp[i] = NULL; diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index a9046d4b8af..7146b69b812 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -502,8 +502,8 @@ void pci_dev_put(struct pci_dev *dev) } #ifndef CONFIG_HOTPLUG -int pci_hotplug (struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) +int pci_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) { return -ENODEV; } @@ -512,7 +512,7 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp, struct bus_type pci_bus_type = { .name = "pci", .match = pci_bus_match, - .hotplug = pci_hotplug, + .uevent = pci_uevent, .suspend = pci_device_suspend, .resume = pci_device_resume, .dev_attrs = pci_dev_attrs, diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6527b36c9a6..294849d2459 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -1,7 +1,7 @@ /* Functions internal to the PCI core code */ -extern int pci_hotplug (struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size); +extern int pci_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size); extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index a30aa74304a..7cf09084ef6 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -901,14 +901,14 @@ int pcmcia_insert_card(struct pcmcia_socket *skt) EXPORT_SYMBOL(pcmcia_insert_card); -static int pcmcia_socket_hotplug(struct class_device *dev, char **envp, - int num_envp, char *buffer, int buffer_size) +static int pcmcia_socket_uevent(struct class_device *dev, char **envp, + int num_envp, char *buffer, int buffer_size) { struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev); int i = 0, length = 0; - if (add_hotplug_env_var(envp, num_envp, &i, buffer, buffer_size, - &length, "SOCKET_NO=%u", s->sock)) + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "SOCKET_NO=%u", s->sock)) return -ENOMEM; envp[i] = NULL; @@ -927,7 +927,7 @@ static void pcmcia_release_socket_class(struct class *data) struct class pcmcia_socket_class = { .name = "pcmcia_socket", - .hotplug = pcmcia_socket_hotplug, + .uevent = pcmcia_socket_uevent, .release = pcmcia_release_socket, .class_release = pcmcia_release_socket_class, }; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7f8219f3fd9..6fb76399547 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -779,8 +779,8 @@ static int pcmcia_bus_match(struct device * dev, struct device_driver * drv) { #ifdef CONFIG_HOTPLUG -static int pcmcia_bus_hotplug(struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) +static int pcmcia_bus_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) { struct pcmcia_device *p_dev; int i, length = 0; @@ -800,31 +800,31 @@ static int pcmcia_bus_hotplug(struct device *dev, char **envp, int num_envp, i = 0; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "SOCKET_NO=%u", - p_dev->socket->sock)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "SOCKET_NO=%u", + p_dev->socket->sock)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "DEVICE_NO=%02X", - p_dev->device_no)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "DEVICE_NO=%02X", + p_dev->device_no)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=pcmcia:m%04Xc%04Xf%02Xfn%02Xpfn%02X" - "pa%08Xpb%08Xpc%08Xpd%08X", - p_dev->has_manf_id ? p_dev->manf_id : 0, - p_dev->has_card_id ? p_dev->card_id : 0, - p_dev->has_func_id ? p_dev->func_id : 0, - p_dev->func, - p_dev->device_no, - hash[0], - hash[1], - hash[2], - hash[3])) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=pcmcia:m%04Xc%04Xf%02Xfn%02Xpfn%02X" + "pa%08Xpb%08Xpc%08Xpd%08X", + p_dev->has_manf_id ? p_dev->manf_id : 0, + p_dev->has_card_id ? p_dev->card_id : 0, + p_dev->has_func_id ? p_dev->func_id : 0, + p_dev->func, + p_dev->device_no, + hash[0], + hash[1], + hash[2], + hash[3])) return -ENOMEM; envp[i] = NULL; @@ -834,7 +834,7 @@ static int pcmcia_bus_hotplug(struct device *dev, char **envp, int num_envp, #else -static int pcmcia_bus_hotplug(struct device *dev, char **envp, int num_envp, +static int pcmcia_bus_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { return -ENODEV; @@ -1223,7 +1223,7 @@ static struct class_interface pcmcia_bus_interface = { struct bus_type pcmcia_bus_type = { .name = "pcmcia", - .hotplug = pcmcia_bus_hotplug, + .uevent = pcmcia_bus_uevent, .match = pcmcia_bus_match, .dev_attrs = pcmcia_dev_attrs, }; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index bf44a409ba0..07ddf9a3875 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -2132,7 +2132,7 @@ restart: } spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - kobject_hotplug(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE); + kobject_uevent(&ioa_cfg->host->shost_classdev.kobj, KOBJ_CHANGE); LEAVE; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e80ef946782..af2f0941baa 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -363,8 +363,7 @@ void usb_driver_release_interface(struct usb_driver *driver, * Most USB device drivers will use this indirectly, through the usb core, * but some layered driver frameworks use it directly. * These device tables are exported with MODULE_DEVICE_TABLE, through - * modutils and "modules.usbmap", to support the driver loading - * functionality of USB hotplugging. + * modutils, to support the driver loading functionality of USB hotplugging. * * What Matches: * @@ -545,10 +544,7 @@ static int usb_device_match (struct device *dev, struct device_driver *drv) #ifdef CONFIG_HOTPLUG /* - * USB hotplugging invokes what /proc/sys/kernel/hotplug says - * (normally /sbin/hotplug) when USB devices get added or removed. - * - * This invokes a user mode policy agent, typically helping to load driver + * This sends an uevent to userspace, typically helping to load driver * or other modules, configure the device, and more. Drivers can provide * a MODULE_DEVICE_TABLE to help with module loading subtasks. * @@ -557,8 +553,8 @@ static int usb_device_match (struct device *dev, struct device_driver *drv) * delays in event delivery. Use sysfs (and DEVPATH) to make sure the * device (and this configuration!) are still present. */ -static int usb_hotplug (struct device *dev, char **envp, int num_envp, - char *buffer, int buffer_size) +static int usb_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) { struct usb_interface *intf; struct usb_device *usb_dev; @@ -570,7 +566,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, return -ENODEV; /* driver is often null here; dev_dbg() would oops */ - pr_debug ("usb %s: hotplug\n", dev->bus_id); + pr_debug ("usb %s: uevent\n", dev->bus_id); /* Must check driver_data here, as on remove driver is always NULL */ if ((dev->driver == &usb_generic_driver) || @@ -597,51 +593,51 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, * * FIXME reduce hardwired intelligence here */ - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "DEVICE=/proc/bus/usb/%03d/%03d", - usb_dev->bus->busnum, usb_dev->devnum)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "DEVICE=/proc/bus/usb/%03d/%03d", + usb_dev->bus->busnum, usb_dev->devnum)) return -ENOMEM; #endif /* per-device configurations are common */ - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "PRODUCT=%x/%x/%x", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice))) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PRODUCT=%x/%x/%x", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice))) return -ENOMEM; /* class-based driver binding models */ - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "TYPE=%d/%d/%d", - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "TYPE=%d/%d/%d", + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "INTERFACE=%d/%d/%d", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) return -ENOMEM; - if (add_hotplug_env_var(envp, num_envp, &i, - buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) return -ENOMEM; envp[i] = NULL; @@ -651,7 +647,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp, #else -static int usb_hotplug (struct device *dev, char **envp, +static int usb_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { return -ENODEV; @@ -1491,7 +1487,7 @@ static int usb_generic_resume(struct device *dev) struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, - .hotplug = usb_hotplug, + .uevent = usb_uevent, .suspend = usb_generic_suspend, .resume = usb_generic_resume, }; diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c index 0eaabeb37ac..641268d7e6f 100644 --- a/drivers/usb/host/hc_crisv10.c +++ b/drivers/usb/host/hc_crisv10.c @@ -4397,7 +4397,7 @@ static int __init etrax_usb_hc_init(void) device_initialize(&fake_device); kobject_set_name(&fake_device.kobj, "etrax_usb"); kobject_add(&fake_device.kobj); - kobject_hotplug(&fake_device.kobj, KOBJ_ADD); + kobject_uevent(&fake_device.kobj, KOBJ_ADD); hc->bus->controller = &fake_device; usb_register_bus(hc->bus); diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 14016b1cd94..024206c4a0e 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -142,12 +142,12 @@ static struct bin_attribute w1_slave_attr_bin_id = { /* Default family */ static struct w1_family w1_default_family; -static int w1_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size); +static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size); static struct bus_type w1_bus_type = { .name = "w1", .match = w1_master_match, - .hotplug = w1_hotplug, + .uevent = w1_uevent, }; struct device_driver w1_master_driver = { @@ -361,7 +361,7 @@ void w1_destroy_master_attributes(struct w1_master *master) } #ifdef CONFIG_HOTPLUG -static int w1_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) +static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { struct w1_master *md = NULL; struct w1_slave *sl = NULL; @@ -377,7 +377,7 @@ static int w1_hotplug(struct device *dev, char **envp, int num_envp, char *buffe event_owner = "slave"; name = sl->name; } else { - dev_dbg(dev, "Unknown hotplug event.\n"); + dev_dbg(dev, "Unknown event.\n"); return -EINVAL; } @@ -386,18 +386,18 @@ static int w1_hotplug(struct device *dev, char **envp, int num_envp, char *buffe if (dev->driver != &w1_slave_driver || !sl) return 0; - err = add_hotplug_env_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_FID=%02X", sl->reg_num.family); + err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_FID=%02X", sl->reg_num.family); if (err) return err; - err = add_hotplug_env_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_SLAVE_ID=%024LX", (u64)sl->reg_num.id); + err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_SLAVE_ID=%024LX", (u64)sl->reg_num.id); if (err) return err; return 0; }; #else -static int w1_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) +static int w1_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { return 0; } diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 8dc1822a702..7187a57d51e 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -226,7 +226,7 @@ static struct sysfs_ops part_sysfs_ops = { static ssize_t part_uevent_store(struct hd_struct * p, const char *page, size_t count) { - kobject_hotplug(&p->kobj, KOBJ_ADD); + kobject_uevent(&p->kobj, KOBJ_ADD); return count; } static ssize_t part_dev_read(struct hd_struct * p, char *page) @@ -360,7 +360,7 @@ void register_disk(struct gendisk *disk) if ((err = kobject_add(&disk->kobj))) return; disk_sysfs_symlinks(disk); - kobject_hotplug(&disk->kobj, KOBJ_ADD); + kobject_uevent(&disk->kobj, KOBJ_ADD); /* No minors to use for partitions */ if (disk->minors == 1) { @@ -465,6 +465,6 @@ void del_gendisk(struct gendisk *disk) sysfs_remove_link(&disk->driverfs_dev->kobj, "block"); put_device(disk->driverfs_dev); } - kobject_hotplug(&disk->kobj, KOBJ_REMOVE); + kobject_uevent(&disk->kobj, KOBJ_REMOVE); kobject_del(&disk->kobj); } diff --git a/include/linux/device.h b/include/linux/device.h index 17cbc6db67b..0cdee78e5ce 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -47,8 +47,8 @@ struct bus_type { struct driver_attribute * drv_attrs; int (*match)(struct device * dev, struct device_driver * drv); - int (*hotplug) (struct device *dev, char **envp, - int num_envp, char *buffer, int buffer_size); + int (*uevent)(struct device *dev, char **envp, + int num_envp, char *buffer, int buffer_size); int (*suspend)(struct device * dev, pm_message_t state); int (*resume)(struct device * dev); }; @@ -151,7 +151,7 @@ struct class { struct class_attribute * class_attrs; struct class_device_attribute * class_dev_attrs; - int (*hotplug)(struct class_device *dev, char **envp, + int (*uevent)(struct class_device *dev, char **envp, int num_envp, char *buffer, int buffer_size); void (*release)(struct class_device *dev); @@ -209,9 +209,9 @@ extern int class_device_create_file(struct class_device *, * set, this will be called instead of the class specific release function. * Only use this if you want to override the default release function, like * when you are nesting class_device structures. - * @hotplug: pointer to a hotplug function for this struct class_device. If - * set, this will be called instead of the class specific hotplug function. - * Only use this if you want to override the default hotplug function, like + * @uevent: pointer to a uevent function for this struct class_device. If + * set, this will be called instead of the class specific uevent function. + * Only use this if you want to override the default uevent function, like * when you are nesting class_device structures. */ struct class_device { @@ -227,7 +227,7 @@ struct class_device { struct class_device *parent; /* parent of this child device, if there is one */ void (*release)(struct class_device *dev); - int (*hotplug)(struct class_device *dev, char **envp, + int (*uevent)(struct class_device *dev, char **envp, int num_envp, char *buffer, int buffer_size); char class_id[BUS_ID_SIZE]; /* unique to this class */ }; diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 2063c0839d4..2d716080be4 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -14,7 +14,7 @@ struct device; int request_firmware(const struct firmware **fw, const char *name, struct device *device); int request_firmware_nowait( - struct module *module, int hotplug, + struct module *module, int uevent, const char *name, struct device *device, void *context, void (*cont)(const struct firmware *fw, void *context)); diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 5b08248fba7..8eb21f2f25e 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -26,15 +26,14 @@ #include #include -#define KOBJ_NAME_LEN 20 - -#define HOTPLUG_PATH_LEN 256 +#define KOBJ_NAME_LEN 20 +#define UEVENT_HELPER_PATH_LEN 256 /* path to the userspace helper executed on an event */ -extern char hotplug_path[]; +extern char uevent_helper[]; -/* counter to tag the hotplug event, read only except for the kobject core */ -extern u64 hotplug_seqnum; +/* counter to tag the uevent, read only except for the kobject core */ +extern u64 uevent_seqnum; /* the actions here must match the proper string in lib/kobject_uevent.c */ typedef int __bitwise kobject_action_t; @@ -101,15 +100,14 @@ struct kobj_type { * of object; multiple ksets can belong to one subsystem. All * ksets of a subsystem share the subsystem's lock. * - * Each kset can support hotplugging; if it does, it will be given - * the opportunity to filter out specific kobjects from being - * reported, as well as to add its own "data" elements to the - * environment being passed to the hotplug helper. + * Each kset can support specific event variables; it can + * supress the event generation or add subsystem specific + * variables carried with the event. */ -struct kset_hotplug_ops { +struct kset_uevent_ops { int (*filter)(struct kset *kset, struct kobject *kobj); const char *(*name)(struct kset *kset, struct kobject *kobj); - int (*hotplug)(struct kset *kset, struct kobject *kobj, char **envp, + int (*uevent)(struct kset *kset, struct kobject *kobj, char **envp, int num_envp, char *buffer, int buffer_size); }; @@ -119,7 +117,7 @@ struct kset { struct list_head list; spinlock_t list_lock; struct kobject kobj; - struct kset_hotplug_ops * hotplug_ops; + struct kset_uevent_ops * uevent_ops; }; @@ -167,20 +165,20 @@ struct subsystem { struct rw_semaphore rwsem; }; -#define decl_subsys(_name,_type,_hotplug_ops) \ +#define decl_subsys(_name,_type,_uevent_ops) \ struct subsystem _name##_subsys = { \ .kset = { \ .kobj = { .name = __stringify(_name) }, \ .ktype = _type, \ - .hotplug_ops =_hotplug_ops, \ + .uevent_ops =_uevent_ops, \ } \ } -#define decl_subsys_name(_varname,_name,_type,_hotplug_ops) \ +#define decl_subsys_name(_varname,_name,_type,_uevent_ops) \ struct subsystem _varname##_subsys = { \ .kset = { \ .kobj = { .name = __stringify(_name) }, \ .ktype = _type, \ - .hotplug_ops =_hotplug_ops, \ + .uevent_ops =_uevent_ops, \ } \ } @@ -256,16 +254,16 @@ extern int subsys_create_file(struct subsystem * , struct subsys_attribute *); extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *); #ifdef CONFIG_HOTPLUG -void kobject_hotplug(struct kobject *kobj, enum kobject_action action); +void kobject_uevent(struct kobject *kobj, enum kobject_action action); -int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, +int add_uevent_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) __attribute__((format (printf, 7, 8))); #else -static inline void kobject_hotplug(struct kobject *kobj, enum kobject_action action) { } +static inline void kobject_uevent(struct kobject *kobj, enum kobject_action action) { } -static inline int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, +static inline int add_uevent_var(char **envp, int num_envp, int *cur_index, char *buffer, int buffer_size, int *cur_len, const char *format, ...) { return 0; } diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 4be34ef8c2f..50156426451 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -124,7 +124,7 @@ enum KERN_OVERFLOWUID=46, /* int: overflow UID */ KERN_OVERFLOWGID=47, /* int: overflow GID */ KERN_SHMPATH=48, /* string: path to shm fs */ - KERN_HOTPLUG=49, /* string: path to hotplug policy agent */ + KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */ KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */ KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */ KERN_CORE_USES_PID=52, /* int: use core or core.%pid */ diff --git a/include/linux/usb.h b/include/linux/usb.h index d81b050e595..7a20997e807 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -225,7 +225,7 @@ struct usb_interface_cache { * Device drivers should not attempt to activate configurations. The choice * of which configuration to install is a policy decision based on such * considerations as available power, functionality provided, and the user's - * desires (expressed through hotplug scripts). However, drivers can call + * desires (expressed through userspace tools). However, drivers can call * usb_reset_configuration() to reinitialize the current configuration and * all its interfaces. */ diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index e975a76a9d5..bfb4a7a54e2 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -26,23 +26,23 @@ static struct subsys_attribute _name##_attr = \ /* current uevent sequence number */ static ssize_t uevent_seqnum_show(struct subsystem *subsys, char *page) { - return sprintf(page, "%llu\n", (unsigned long long)hotplug_seqnum); + return sprintf(page, "%llu\n", (unsigned long long)uevent_seqnum); } KERNEL_ATTR_RO(uevent_seqnum); /* uevent helper program, used during early boo */ static ssize_t uevent_helper_show(struct subsystem *subsys, char *page) { - return sprintf(page, "%s\n", hotplug_path); + return sprintf(page, "%s\n", uevent_helper); } static ssize_t uevent_helper_store(struct subsystem *subsys, const char *page, size_t count) { - if (count+1 > HOTPLUG_PATH_LEN) + if (count+1 > UEVENT_HELPER_PATH_LEN) return -ENOENT; - memcpy(hotplug_path, page, count); - hotplug_path[count] = '\0'; - if (count && hotplug_path[count-1] == '\n') - hotplug_path[count-1] = '\0'; + memcpy(uevent_helper, page, count); + uevent_helper[count] = '\0'; + if (count && uevent_helper[count-1] == '\n') + uevent_helper[count-1] = '\0'; return count; } KERNEL_ATTR_RW(uevent_helper); diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 6a51e25d446..345f4a1d533 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -395,8 +395,8 @@ static ctl_table kern_table[] = { { .ctl_name = KERN_HOTPLUG, .procname = "hotplug", - .data = &hotplug_path, - .maxlen = HOTPLUG_PATH_LEN, + .data = &uevent_helper, + .maxlen = UEVENT_HELPER_PATH_LEN, .mode = 0644, .proc_handler = &proc_dostring, .strategy = &sysctl_string, diff --git a/lib/kobject.c b/lib/kobject.c index a181abed89f..7a0e6809490 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -207,7 +207,7 @@ int kobject_register(struct kobject * kobj) kobject_name(kobj),error); dump_stack(); } else - kobject_hotplug(kobj, KOBJ_ADD); + kobject_uevent(kobj, KOBJ_ADD); } else error = -EINVAL; return error; @@ -312,7 +312,7 @@ void kobject_del(struct kobject * kobj) void kobject_unregister(struct kobject * kobj) { pr_debug("kobject %s: unregistering\n",kobject_name(kobj)); - kobject_hotplug(kobj, KOBJ_REMOVE); + kobject_uevent(kobj, KOBJ_REMOVE); kobject_del(kobj); kobject_put(kobj); } diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index dd061da3aba..01479e5c6d1 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -22,12 +22,12 @@ #include #include -#define BUFFER_SIZE 1024 /* buffer for the hotplug env */ +#define BUFFER_SIZE 1024 /* buffer for the variables */ #define NUM_ENVP 32 /* number of env pointers */ #if defined(CONFIG_HOTPLUG) -char hotplug_path[HOTPLUG_PATH_LEN] = "/sbin/hotplug"; -u64 hotplug_seqnum; +char uevent_helper[UEVENT_HELPER_PATH_LEN] = "/sbin/hotplug"; +u64 uevent_seqnum; static DEFINE_SPINLOCK(sequence_lock); static struct sock *uevent_sock; @@ -50,12 +50,12 @@ static char *action_to_string(enum kobject_action action) } /** - * kobject_hotplug - notify userspace by executing /sbin/hotplug + * kobject_uevent - notify userspace by ending an uevent * - * @action: action that is happening (usually "ADD" or "REMOVE") + * @action: action that is happening (usually KOBJ_ADD and KOBJ_REMOVE) * @kobj: struct kobject that the action is happening to */ -void kobject_hotplug(struct kobject *kobj, enum kobject_action action) +void kobject_uevent(struct kobject *kobj, enum kobject_action action) { char **envp; char *buffer; @@ -65,7 +65,7 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) const char *subsystem; struct kobject *top_kobj; struct kset *kset; - struct kset_hotplug_ops *hotplug_ops; + struct kset_uevent_ops *uevent_ops; u64 seq; char *seq_buff; int i = 0; @@ -88,11 +88,11 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) return; kset = top_kobj->kset; - hotplug_ops = kset->hotplug_ops; + uevent_ops = kset->uevent_ops; /* skip the event, if the filter returns zero. */ - if (hotplug_ops && hotplug_ops->filter) - if (!hotplug_ops->filter(kset, kobj)) + if (uevent_ops && uevent_ops->filter) + if (!uevent_ops->filter(kset, kobj)) return; /* environment index */ @@ -111,8 +111,8 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) goto exit; /* originating subsystem */ - if (hotplug_ops && hotplug_ops->name) - subsystem = hotplug_ops->name(kset, kobj); + if (uevent_ops && uevent_ops->name) + subsystem = uevent_ops->name(kset, kobj); else subsystem = kobject_name(&kset->kobj); @@ -134,12 +134,12 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) scratch += strlen("SEQNUM=18446744073709551616") + 1; /* let the kset specific function add its stuff */ - if (hotplug_ops && hotplug_ops->hotplug) { - retval = hotplug_ops->hotplug (kset, kobj, + if (uevent_ops && uevent_ops->uevent) { + retval = uevent_ops->uevent(kset, kobj, &envp[i], NUM_ENVP - i, scratch, BUFFER_SIZE - (scratch - buffer)); if (retval) { - pr_debug ("%s - hotplug() returned %d\n", + pr_debug ("%s - uevent() returned %d\n", __FUNCTION__, retval); goto exit; } @@ -147,7 +147,7 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) /* we will send an event, request a new sequence number */ spin_lock(&sequence_lock); - seq = ++hotplug_seqnum; + seq = ++uevent_seqnum; spin_unlock(&sequence_lock); sprintf(seq_buff, "SEQNUM=%llu", (unsigned long long)seq); @@ -177,10 +177,10 @@ void kobject_hotplug(struct kobject *kobj, enum kobject_action action) } /* call uevent_helper, usually only enabled during early boot */ - if (hotplug_path[0]) { + if (uevent_helper[0]) { char *argv [3]; - argv [0] = hotplug_path; + argv [0] = uevent_helper; argv [1] = (char *)subsystem; argv [2] = NULL; call_usermodehelper (argv[0], argv, envp, 0); @@ -192,39 +192,39 @@ exit: kfree(envp); return; } -EXPORT_SYMBOL(kobject_hotplug); +EXPORT_SYMBOL_GPL(kobject_uevent); /** - * add_hotplug_env_var - helper for creating hotplug environment variables + * add_uevent_var - helper for creating event variables * @envp: Pointer to table of environment variables, as passed into - * hotplug() method. + * uevent() method. * @num_envp: Number of environment variable slots available, as - * passed into hotplug() method. + * passed into uevent() method. * @cur_index: Pointer to current index into @envp. It should be - * initialized to 0 before the first call to add_hotplug_env_var(), + * initialized to 0 before the first call to add_uevent_var(), * and will be incremented on success. * @buffer: Pointer to buffer for environment variables, as passed - * into hotplug() method. - * @buffer_size: Length of @buffer, as passed into hotplug() method. + * into uevent() method. + * @buffer_size: Length of @buffer, as passed into uevent() method. * @cur_len: Pointer to current length of space used in @buffer. * Should be initialized to 0 before the first call to - * add_hotplug_env_var(), and will be incremented on success. + * add_uevent_var(), and will be incremented on success. * @format: Format for creating environment variable (of the form * "XXX=%x") for snprintf(). * * Returns 0 if environment variable was added successfully or -ENOMEM * if no space was available. */ -int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, - char *buffer, int buffer_size, int *cur_len, - const char *format, ...) +int add_uevent_var(char **envp, int num_envp, int *cur_index, + char *buffer, int buffer_size, int *cur_len, + const char *format, ...) { va_list args; /* * We check against num_envp - 1 to make sure there is at - * least one slot left after we return, since the hotplug - * method needs to set the last slot to NULL. + * least one slot left after we return, since kobject_uevent() + * needs to set the last slot to NULL. */ if (*cur_index >= num_envp - 1) return -ENOMEM; @@ -243,7 +243,7 @@ int add_hotplug_env_var(char **envp, int num_envp, int *cur_index, (*cur_index)++; return 0; } -EXPORT_SYMBOL(add_hotplug_env_var); +EXPORT_SYMBOL_GPL(add_uevent_var); static int __init kobject_uevent_init(void) { diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index bd7568ac87f..0ed38740388 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -78,7 +78,7 @@ static struct class_device_attribute *bt_attrs[] = { }; #ifdef CONFIG_HOTPLUG -static int bt_hotplug(struct class_device *cdev, char **envp, int num_envp, char *buf, int size) +static int bt_uevent(struct class_device *cdev, char **envp, int num_envp, char *buf, int size) { struct hci_dev *hdev = class_get_devdata(cdev); int n, i = 0; @@ -107,7 +107,7 @@ struct class bt_class = { .name = "bluetooth", .release = bt_release, #ifdef CONFIG_HOTPLUG - .hotplug = bt_hotplug, + .uevent = bt_uevent, #endif }; diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c index f6a19d53eae..2ebdc23bbe2 100644 --- a/net/bridge/br_sysfs_if.c +++ b/net/bridge/br_sysfs_if.c @@ -248,7 +248,7 @@ int br_sysfs_addif(struct net_bridge_port *p) if (err) goto out2; - kobject_hotplug(&p->kobj, KOBJ_ADD); + kobject_uevent(&p->kobj, KOBJ_ADD); return 0; out2: kobject_del(&p->kobj); @@ -260,7 +260,7 @@ void br_sysfs_removeif(struct net_bridge_port *p) { pr_debug("br_sysfs_removeif\n"); sysfs_remove_link(&p->br->ifobj, p->dev->name); - kobject_hotplug(&p->kobj, KOBJ_REMOVE); + kobject_uevent(&p->kobj, KOBJ_REMOVE); kobject_del(&p->kobj); } diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index e2137f3e489..198655dd9a7 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -369,14 +369,14 @@ static struct attribute_group wireless_group = { #endif #ifdef CONFIG_HOTPLUG -static int netdev_hotplug(struct class_device *cd, char **envp, - int num_envp, char *buf, int size) +static int netdev_uevent(struct class_device *cd, char **envp, + int num_envp, char *buf, int size) { struct net_device *dev = to_net_dev(cd); int i = 0; int n; - /* pass interface in env to hotplug. */ + /* pass interface to uevent. */ envp[i++] = buf; n = snprintf(buf, size, "INTERFACE=%s", dev->name) + 1; buf += n; @@ -408,7 +408,7 @@ static struct class net_class = { .name = "net", .release = netdev_release, #ifdef CONFIG_HOTPLUG - .hotplug = netdev_hotplug, + .uevent = netdev_uevent, #endif }; -- cgit v1.2.3-70-g09d2 From 6d20b035dee4300e9786c6e1cb77a765c7f9460a Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 25 Nov 2005 20:04:26 -0800 Subject: [PATCH] driver kill hotplug word from sn and others fix The first of these changes s/hotplug/uevent/ was needed to compile sn2_defconfig (ia64/sn). The other three files changed are blind changes of all remaining bus_type.hotplug references I could find to bus_type.uevent. This patch attempts to finish similar changes made in the gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch. Signed-off-by: Paul Jackson Signed-off-by: Greg Kroah-Hartman --- arch/arm/common/amba.c | 6 +++--- arch/ia64/sn/kernel/tiocx.c | 4 ++-- drivers/s390/cio/ccwgroup.c | 4 ++-- drivers/s390/cio/device.c | 4 ++-- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c index e1013112c35..c95ec9eab99 100644 --- a/arch/arm/common/amba.c +++ b/arch/arm/common/amba.c @@ -45,7 +45,7 @@ static int amba_match(struct device *dev, struct device_driver *drv) } #ifdef CONFIG_HOTPLUG -static int amba_hotplug(struct device *dev, char **envp, int nr_env, char *buf, int bufsz) +static int amba_uevent(struct device *dev, char **envp, int nr_env, char *buf, int bufsz) { struct amba_device *pcdev = to_amba_device(dev); @@ -58,7 +58,7 @@ static int amba_hotplug(struct device *dev, char **envp, int nr_env, char *buf, return 0; } #else -#define amba_hotplug NULL +#define amba_uevent NULL #endif static int amba_suspend(struct device *dev, pm_message_t state) @@ -88,7 +88,7 @@ static int amba_resume(struct device *dev) static struct bus_type amba_bustype = { .name = "amba", .match = amba_match, - .hotplug = amba_hotplug, + .uevent = amba_uevent, .suspend = amba_suspend, .resume = amba_resume, }; diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 0d8592a745a..768c21deb2e 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -65,7 +65,7 @@ static int tiocx_match(struct device *dev, struct device_driver *drv) } -static int tiocx_hotplug(struct device *dev, char **envp, int num_envp, +static int tiocx_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { return -ENODEV; @@ -79,7 +79,7 @@ static void tiocx_bus_release(struct device *dev) struct bus_type tiocx_bus_type = { .name = "tiocx", .match = tiocx_match, - .hotplug = tiocx_hotplug, + .uevent = tiocx_uevent, }; /** diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index e7bd7f37f08..be9d2d65c22 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -45,7 +45,7 @@ ccwgroup_bus_match (struct device * dev, struct device_driver * drv) return 0; } static int -ccwgroup_hotplug (struct device *dev, char **envp, int num_envp, char *buffer, +ccwgroup_uevent (struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { /* TODO */ @@ -55,7 +55,7 @@ ccwgroup_hotplug (struct device *dev, char **envp, int num_envp, char *buffer, static struct bus_type ccwgroup_bus_type = { .name = "ccwgroup", .match = ccwgroup_bus_match, - .hotplug = ccwgroup_hotplug, + .uevent = ccwgroup_uevent, }; static inline void diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 811c9d15063..85908cacc3b 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -59,7 +59,7 @@ ccw_bus_match (struct device * dev, struct device_driver * drv) * Heavily modeled on pci and usb hotplug. */ static int -ccw_hotplug (struct device *dev, char **envp, int num_envp, +ccw_uevent (struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { struct ccw_device *cdev = to_ccwdev(dev); @@ -110,7 +110,7 @@ ccw_hotplug (struct device *dev, char **envp, int num_envp, struct bus_type ccw_bus_type = { .name = "ccw", .match = &ccw_bus_match, - .hotplug = &ccw_hotplug, + .uevent = &ccw_uevent, }; static int io_subchannel_probe (struct device *); -- cgit v1.2.3-70-g09d2 From bf74ad5bc41727d5f2f1c6bedb2c1fac394de731 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 17 Nov 2005 16:54:12 -0500 Subject: [PATCH] Hold the device's parent's lock during probe and remove This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 15 ++++++++++++++- drivers/base/dd.c | 15 ++++++++++++++- 2 files changed, 28 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/bus.c b/drivers/base/bus.c index fa601b085eb..e3f915a2489 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -152,7 +152,11 @@ static ssize_t driver_unbind(struct device_driver *drv, dev = bus_find_device(bus, NULL, (void *)buf, driver_helper); if (dev && dev->driver == drv) { + if (dev->parent) /* Needed for USB */ + down(&dev->parent->sem); device_release_driver(dev); + if (dev->parent) + up(&dev->parent->sem); err = count; } put_device(dev); @@ -175,9 +179,13 @@ static ssize_t driver_bind(struct device_driver *drv, dev = bus_find_device(bus, NULL, (void *)buf, driver_helper); if (dev && dev->driver == NULL) { + if (dev->parent) /* Needed for USB */ + down(&dev->parent->sem); down(&dev->sem); err = driver_probe_device(drv, dev); up(&dev->sem); + if (dev->parent) + up(&dev->parent->sem); } put_device(dev); put_bus(bus); @@ -484,8 +492,13 @@ void bus_remove_driver(struct device_driver * drv) /* Helper for bus_rescan_devices's iter */ static int bus_rescan_devices_helper(struct device *dev, void *data) { - if (!dev->driver) + if (!dev->driver) { + if (dev->parent) /* Needed for USB */ + down(&dev->parent->sem); device_attach(dev); + if (dev->parent) + up(&dev->parent->sem); + } return 0; } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 3b419c9a1e7..2b905016664 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -65,7 +65,8 @@ void device_bind_driver(struct device * dev) * This function returns 1 if a match is found, an error if one * occurs (that is not -ENODEV or -ENXIO), and 0 otherwise. * - * This function must be called with @dev->sem held. + * This function must be called with @dev->sem held. When called + * for a USB interface, @dev->parent->sem must be held as well. */ int driver_probe_device(struct device_driver * drv, struct device * dev) { @@ -123,6 +124,8 @@ static int __device_attach(struct device_driver * drv, void * data) * * Returns 1 if the device was bound to a driver; * 0 if no matching device was found; error code otherwise. + * + * When called for a USB interface, @dev->parent->sem must be held. */ int device_attach(struct device * dev) { @@ -152,10 +155,14 @@ static int __driver_attach(struct device * dev, void * data) * is an error. */ + if (dev->parent) /* Needed for USB */ + down(&dev->parent->sem); down(&dev->sem); if (!dev->driver) driver_probe_device(drv, dev); up(&dev->sem); + if (dev->parent) + up(&dev->parent->sem); return 0; } @@ -181,6 +188,8 @@ void driver_attach(struct device_driver * drv) * Manually detach device from driver. * * __device_release_driver() must be called with @dev->sem held. + * When called for a USB interface, @dev->parent->sem must be held + * as well. */ static void __device_release_driver(struct device * dev) @@ -233,10 +242,14 @@ void driver_detach(struct device_driver * drv) get_device(dev); spin_unlock(&drv->klist_devices.k_lock); + if (dev->parent) /* Needed for USB */ + down(&dev->parent->sem); down(&dev->sem); if (dev->driver == drv) __device_release_driver(dev); up(&dev->sem); + if (dev->parent) + up(&dev->parent->sem); put_device(dev); } } -- cgit v1.2.3-70-g09d2 From d960bb4db9f422b5c3c82e0dfd6c8213a4fc430d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 28 Nov 2005 10:15:39 -0600 Subject: [PATCH] Allow overlapping resources for platform devices There are cases in which a device's memory mapped registers overlap with another device's memory mapped registers. On several PowerPC devices this occurs for the MDIO bus, whose registers tended to overlap with one of the ethernet controllers. By switching from request_resource to insert_resource we can register the MDIO bus as a proper platform device and not hack around how we handle its memory mapped registers. Signed-off-by: Kumar Gala Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 8827dafba94..1091af1cbb5 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -257,7 +257,7 @@ int platform_device_add(struct platform_device *pdev) p = &ioport_resource; } - if (p && request_resource(p, r)) { + if (p && insert_resource(p, r)) { printk(KERN_ERR "%s: failed to claim resource %d\n", pdev->dev.bus_id, i); -- cgit v1.2.3-70-g09d2 From 263756ec228f1cdd49fc50b1f87001a4cebdfe12 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 12 Dec 2005 18:03:44 +0100 Subject: [PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ... IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/ide/ide-cd.c | 1 + drivers/ide/ide-disk.c | 1 + drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-tape.c | 1 + drivers/ide/ide.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 64 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b4d7a3efb90..70aeb3a6012 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3509,6 +3509,7 @@ static int __init ide_cdrom_init(void) return driver_register(&ide_cdrom_driver.gen_driver); } +MODULE_ALIAS("ide:*m-cdrom*"); module_init(ide_cdrom_init); module_exit(ide_cdrom_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 449522f0540..4e5767968d7 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1271,6 +1271,7 @@ static int __init idedisk_init(void) return driver_register(&idedisk_driver.gen_driver); } +MODULE_ALIAS("ide:*m-disk*"); module_init(idedisk_init); module_exit(idedisk_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 9e293c8063d..fba3fffc2d6 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -2197,6 +2197,7 @@ static int __init idefloppy_init(void) return driver_register(&idefloppy_driver.gen_driver); } +MODULE_ALIAS("ide:*m-floppy*"); module_init(idefloppy_init); module_exit(idefloppy_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7d7944ed415..fab9b2b0250 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4947,6 +4947,7 @@ out: return error; } +MODULE_ALIAS("ide:*m-tape*"); module_init(idetape_init); module_exit(idetape_exit); MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 8af179b531c..4b524f6b3ec 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1904,9 +1904,69 @@ static int ide_bus_match(struct device *dev, struct device_driver *drv) return 1; } +static char *media_string(ide_drive_t *drive) +{ + switch (drive->media) { + case ide_disk: + return "disk"; + case ide_cdrom: + return "cdrom"; + case ide_tape: + return "tape"; + case ide_floppy: + return "floppy"; + default: + return "UNKNOWN"; + } +} + +static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", media_string(drive)); +} + +static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->name); +} + +static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "ide:m-%s\n", media_string(drive)); +} + +static struct device_attribute ide_dev_attrs[] = { + __ATTR_RO(media), + __ATTR_RO(drivename), + __ATTR_RO(modalias), + __ATTR_NULL +}; + +static int ide_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + ide_drive_t *drive = to_ide_device(dev); + int i = 0; + int length = 0; + + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, + "MEDIA=%s", media_string(drive)); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, + "DRIVENAME=%s", drive->name); + add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, + "MODALIAS=ide:m-%s", media_string(drive)); + envp[i] = NULL; + return 0; +} + struct bus_type ide_bus_type = { .name = "ide", .match = ide_bus_match, + .uevent = ide_uevent, + .dev_attrs = ide_dev_attrs, .suspend = generic_ide_suspend, .resume = generic_ide_resume, }; -- cgit v1.2.3-70-g09d2 From 1d8f430c15b3a345db990e285742c67c2f52f9a6 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 7 Dec 2005 21:40:34 +0100 Subject: [PATCH] Input: add modalias support Here's the patch for modalias support for input classes. It uses comma-separated numbers, and doesn't describe all the potential keys (no module currently cares, and that would make the strings huge). The changes to input.h are to move the definitions needed by file2alias outside __KERNEL__. I chose not to move those definitions to mod_devicetable.h, because there are so many that it might break compile of something else in the kernel. The rest is fairly straightforward. Signed-off-by: Rusty Russell CC: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/input/input.c | 39 ++++++++++++++++++++++++ include/linux/input.h | 79 +++++++++++++++++++++++++----------------------- scripts/mod/file2alias.c | 62 ++++++++++++++++++++++++++++++++++++- 3 files changed, 141 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 2d37b394e38..ef5824c8846 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -528,10 +528,49 @@ INPUT_DEV_STRING_ATTR_SHOW(name); INPUT_DEV_STRING_ATTR_SHOW(phys); INPUT_DEV_STRING_ATTR_SHOW(uniq); +static int print_modalias_bits(char *buf, char prefix, unsigned long *arr, + unsigned int min, unsigned int max) +{ + int len, i; + + len = sprintf(buf, "%c", prefix); + for (i = min; i < max; i++) + if (arr[LONG(i)] & BIT(i)) + len += sprintf(buf+len, "%X,", i); + return len; +} + +static ssize_t input_dev_show_modalias(struct class_device *dev, char *buf) +{ + struct input_dev *id = to_input_dev(dev); + ssize_t len = 0; + + len += sprintf(buf+len, "input:b%04Xv%04Xp%04Xe%04X-", + id->id.bustype, + id->id.vendor, + id->id.product, + id->id.version); + + len += print_modalias_bits(buf+len, 'e', id->evbit, 0, EV_MAX); + len += print_modalias_bits(buf+len, 'k', id->keybit, + KEY_MIN_INTERESTING, KEY_MAX); + len += print_modalias_bits(buf+len, 'r', id->relbit, 0, REL_MAX); + len += print_modalias_bits(buf+len, 'a', id->absbit, 0, ABS_MAX); + len += print_modalias_bits(buf+len, 'm', id->mscbit, 0, MSC_MAX); + len += print_modalias_bits(buf+len, 'l', id->ledbit, 0, LED_MAX); + len += print_modalias_bits(buf+len, 's', id->sndbit, 0, SND_MAX); + len += print_modalias_bits(buf+len, 'f', id->ffbit, 0, FF_MAX); + len += print_modalias_bits(buf+len, 'w', id->swbit, 0, SW_MAX); + len += sprintf(buf+len, "\n"); + return len; +} +static CLASS_DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL); + static struct attribute *input_dev_attrs[] = { &class_device_attr_name.attr, &class_device_attr_phys.attr, &class_device_attr_uniq.attr, + &class_device_attr_modalias.attr, NULL }; diff --git a/include/linux/input.h b/include/linux/input.h index 3c5823368dd..bef08551a33 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -18,6 +18,7 @@ #include #include #endif +#include /* * The event structure itself @@ -511,6 +512,8 @@ struct input_absinfo { #define KEY_FN_S 0x1e3 #define KEY_FN_B 0x1e4 +/* We avoid low common keys in module aliases so they don't get huge. */ +#define KEY_MIN_INTERESTING KEY_MUTE #define KEY_MAX 0x1ff /* @@ -793,6 +796,44 @@ struct ff_effect { #define FF_MAX 0x7f +struct input_device_id { + + kernel_ulong_t flags; + + struct input_id id; + + kernel_ulong_t evbit[EV_MAX/BITS_PER_LONG+1]; + kernel_ulong_t keybit[KEY_MAX/BITS_PER_LONG+1]; + kernel_ulong_t relbit[REL_MAX/BITS_PER_LONG+1]; + kernel_ulong_t absbit[ABS_MAX/BITS_PER_LONG+1]; + kernel_ulong_t mscbit[MSC_MAX/BITS_PER_LONG+1]; + kernel_ulong_t ledbit[LED_MAX/BITS_PER_LONG+1]; + kernel_ulong_t sndbit[SND_MAX/BITS_PER_LONG+1]; + kernel_ulong_t ffbit[FF_MAX/BITS_PER_LONG+1]; + kernel_ulong_t swbit[SW_MAX/BITS_PER_LONG+1]; + + kernel_ulong_t driver_info; +}; + +/* + * Structure for hotplug & device<->driver matching. + */ + +#define INPUT_DEVICE_ID_MATCH_BUS 1 +#define INPUT_DEVICE_ID_MATCH_VENDOR 2 +#define INPUT_DEVICE_ID_MATCH_PRODUCT 4 +#define INPUT_DEVICE_ID_MATCH_VERSION 8 + +#define INPUT_DEVICE_ID_MATCH_EVBIT 0x010 +#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x020 +#define INPUT_DEVICE_ID_MATCH_RELBIT 0x040 +#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x080 +#define INPUT_DEVICE_ID_MATCH_MSCIT 0x100 +#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x200 +#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x400 +#define INPUT_DEVICE_ID_MATCH_FFBIT 0x800 +#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 + #ifdef __KERNEL__ /* @@ -901,49 +942,11 @@ struct input_dev { }; #define to_input_dev(d) container_of(d, struct input_dev, cdev) -/* - * Structure for hotplug & device<->driver matching. - */ - -#define INPUT_DEVICE_ID_MATCH_BUS 1 -#define INPUT_DEVICE_ID_MATCH_VENDOR 2 -#define INPUT_DEVICE_ID_MATCH_PRODUCT 4 -#define INPUT_DEVICE_ID_MATCH_VERSION 8 - -#define INPUT_DEVICE_ID_MATCH_EVBIT 0x010 -#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x020 -#define INPUT_DEVICE_ID_MATCH_RELBIT 0x040 -#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x080 -#define INPUT_DEVICE_ID_MATCH_MSCIT 0x100 -#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x200 -#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x400 -#define INPUT_DEVICE_ID_MATCH_FFBIT 0x800 -#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 - #define INPUT_DEVICE_ID_MATCH_DEVICE\ (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) #define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION\ (INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION) -struct input_device_id { - - unsigned long flags; - - struct input_id id; - - unsigned long evbit[NBITS(EV_MAX)]; - unsigned long keybit[NBITS(KEY_MAX)]; - unsigned long relbit[NBITS(REL_MAX)]; - unsigned long absbit[NBITS(ABS_MAX)]; - unsigned long mscbit[NBITS(MSC_MAX)]; - unsigned long ledbit[NBITS(LED_MAX)]; - unsigned long sndbit[NBITS(SND_MAX)]; - unsigned long ffbit[NBITS(FF_MAX)]; - unsigned long swbit[NBITS(SW_MAX)]; - - unsigned long driver_info; -}; - struct input_handle; struct input_handler { diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index e3d144a3f10..e0eedffe565 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -16,8 +16,10 @@ * use either stdint.h or inttypes.h for the rest. */ #if KERNEL_ELFCLASS == ELFCLASS32 typedef Elf32_Addr kernel_ulong_t; +#define BITS_PER_LONG 32 #else typedef Elf64_Addr kernel_ulong_t; +#define BITS_PER_LONG 64 #endif #ifdef __sun__ #include @@ -35,6 +37,7 @@ typedef unsigned char __u8; * even potentially has different endianness and word sizes, since * we handle those differences explicitly below */ #include "../../include/linux/mod_devicetable.h" +#include "../../include/linux/input.h" #define ADD(str, sep, cond, field) \ do { \ @@ -366,6 +369,61 @@ static int do_i2c_entry(const char *filename, struct i2c_device_id *i2c, char *a return 1; } +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +static void do_input(char *alias, + kernel_ulong_t *arr, unsigned int min, unsigned int max) +{ + unsigned int i; + for (i = min; i < max; i++) { + if (arr[i/BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) + sprintf(alias+strlen(alias), "%X,*", i); + } +} + +/* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */ +static int do_input_entry(const char *filename, struct input_device_id *id, + char *alias) +{ + sprintf(alias, "input:"); + + ADD(alias, "b", id->flags&INPUT_DEVICE_ID_MATCH_BUS, id->id.bustype); + ADD(alias, "v", id->flags&INPUT_DEVICE_ID_MATCH_VENDOR, id->id.vendor); + ADD(alias, "p", id->flags&INPUT_DEVICE_ID_MATCH_PRODUCT, + id->id.product); + ADD(alias, "e", id->flags&INPUT_DEVICE_ID_MATCH_VERSION, + id->id.version); + + sprintf(alias + strlen(alias), "-e*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_EVBIT) + do_input(alias, id->evbit, 0, EV_MAX); + sprintf(alias + strlen(alias), "k*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_KEYBIT) + do_input(alias, id->keybit, KEY_MIN_INTERESTING, KEY_MAX); + sprintf(alias + strlen(alias), "r*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_RELBIT) + do_input(alias, id->relbit, 0, REL_MAX); + sprintf(alias + strlen(alias), "a*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_ABSBIT) + do_input(alias, id->absbit, 0, ABS_MAX); + sprintf(alias + strlen(alias), "m*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_MSCIT) + do_input(alias, id->mscbit, 0, MSC_MAX); + sprintf(alias + strlen(alias), "l*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_LEDBIT) + do_input(alias, id->ledbit, 0, LED_MAX); + sprintf(alias + strlen(alias), "s*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_SNDBIT) + do_input(alias, id->sndbit, 0, SND_MAX); + sprintf(alias + strlen(alias), "f*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_FFBIT) + do_input(alias, id->ffbit, 0, SND_MAX); + sprintf(alias + strlen(alias), "w*"); + if (id->flags&INPUT_DEVICE_ID_MATCH_SWBIT) + do_input(alias, id->swbit, 0, SW_MAX); + return 1; +} + /* Ignore any prefix, eg. v850 prepends _ */ static inline int sym_is(const char *symbol, const char *name) { @@ -453,7 +511,9 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, else if (sym_is(symname, "__mod_i2c_device_table")) do_table(symval, sym->st_size, sizeof(struct i2c_device_id), do_i2c_entry, mod); - + else if (sym_is(symname, "__mod_input_device_table")) + do_table(symval, sym->st_size, sizeof(struct input_device_id), + do_input_entry, mod); } /* Now add out buffered information to the generated C source */ -- cgit v1.2.3-70-g09d2 From 93ce3061be212f6280e7ccafa9a7f698a95c6d75 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 10 Dec 2005 01:36:27 -0500 Subject: [PATCH] Driver Core: Add platform_device_del() Driver core: add platform_device_del function Having platform_device_del90 allows more straightforward error handling code in drivers registering platform devices. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 45 +++++++++++++++++++++++++++-------------- include/linux/platform_device.h | 1 + 2 files changed, 31 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 1091af1cbb5..95ecfc490d5 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -168,7 +168,7 @@ struct platform_device *platform_device_alloc(const char *name, unsigned int id) pa->pdev.dev.release = platform_device_release; } - return pa ? &pa->pdev : NULL; + return pa ? &pa->pdev : NULL; } EXPORT_SYMBOL_GPL(platform_device_alloc); @@ -282,24 +282,13 @@ int platform_device_add(struct platform_device *pdev) EXPORT_SYMBOL_GPL(platform_device_add); /** - * platform_device_register - add a platform-level device - * @pdev: platform device we're adding - * - */ -int platform_device_register(struct platform_device * pdev) -{ - device_initialize(&pdev->dev); - return platform_device_add(pdev); -} - -/** - * platform_device_unregister - remove a platform-level device + * platform_device_del - remove a platform-level device * @pdev: platform device we're removing * * Note that this function will also release all memory- and port-based * resources owned by the device (@dev->resource). */ -void platform_device_unregister(struct platform_device * pdev) +void platform_device_del(struct platform_device *pdev) { int i; @@ -310,9 +299,35 @@ void platform_device_unregister(struct platform_device * pdev) release_resource(r); } - device_unregister(&pdev->dev); + device_del(&pdev->dev); } } +EXPORT_SYMBOL_GPL(platform_device_del); + +/** + * platform_device_register - add a platform-level device + * @pdev: platform device we're adding + * + */ +int platform_device_register(struct platform_device * pdev) +{ + device_initialize(&pdev->dev); + return platform_device_add(pdev); +} + +/** + * platform_device_unregister - unregister a platform-level device + * @pdev: platform device we're unregistering + * + * Unregistration is done in 2 steps. Fisrt we release all resources + * and remove it from the sybsystem, then we drop reference count by + * calling platform_device_put(). + */ +void platform_device_unregister(struct platform_device * pdev) +{ + platform_device_del(pdev); + platform_device_put(pdev); +} /** * platform_device_register_simple diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 17e336f40b4..782090c6893 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -41,6 +41,7 @@ extern struct platform_device *platform_device_alloc(const char *name, unsigned extern int platform_device_add_resources(struct platform_device *pdev, struct resource *res, unsigned int num); extern int platform_device_add_data(struct platform_device *pdev, void *data, size_t size); extern int platform_device_add(struct platform_device *pdev); +extern void platform_device_del(struct platform_device *pdev); extern void platform_device_put(struct platform_device *pdev); struct platform_driver { -- cgit v1.2.3-70-g09d2 From a96b204208443ab7e23c681f7ddabe807a741d0c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 10 Dec 2005 01:36:28 -0500 Subject: [PATCH] Driver Core: Rearrange exports in platform.c Driver core: rearrange exports in platform.c The new way is to specify export right after symbol definition. Rearrange exports to follow new style to avoid mixing two styles in one file. Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 95ecfc490d5..0f81731bdfa 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -25,6 +25,7 @@ struct device platform_bus = { .bus_id = "platform", }; +EXPORT_SYMBOL_GPL(platform_bus); /** * platform_get_resource - get a resource for a device @@ -49,6 +50,7 @@ platform_get_resource(struct platform_device *dev, unsigned int type, } return NULL; } +EXPORT_SYMBOL_GPL(platform_get_resource); /** * platform_get_irq - get an IRQ for a device @@ -61,6 +63,7 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) return r ? r->start : 0; } +EXPORT_SYMBOL_GPL(platform_get_irq); /** * platform_get_resource_byname - get a resource for a device by name @@ -84,6 +87,7 @@ platform_get_resource_byname(struct platform_device *dev, unsigned int type, } return NULL; } +EXPORT_SYMBOL_GPL(platform_get_resource_byname); /** * platform_get_irq - get an IRQ for a device @@ -96,6 +100,7 @@ int platform_get_irq_byname(struct platform_device *dev, char *name) return r ? r->start : 0; } +EXPORT_SYMBOL_GPL(platform_get_irq_byname); /** * platform_add_devices - add a numbers of platform devices @@ -117,6 +122,7 @@ int platform_add_devices(struct platform_device **devs, int num) return ret; } +EXPORT_SYMBOL_GPL(platform_add_devices); struct platform_object { struct platform_device pdev; @@ -314,6 +320,7 @@ int platform_device_register(struct platform_device * pdev) device_initialize(&pdev->dev); return platform_device_add(pdev); } +EXPORT_SYMBOL_GPL(platform_device_register); /** * platform_device_unregister - unregister a platform-level device @@ -328,6 +335,7 @@ void platform_device_unregister(struct platform_device * pdev) platform_device_del(pdev); platform_device_put(pdev); } +EXPORT_SYMBOL_GPL(platform_device_unregister); /** * platform_device_register_simple @@ -370,6 +378,7 @@ error: platform_device_put(pdev); return ERR_PTR(retval); } +EXPORT_SYMBOL_GPL(platform_device_register_simple); static int platform_drv_probe(struct device *_dev) { @@ -491,6 +500,7 @@ struct bus_type platform_bus_type = { .suspend = platform_suspend, .resume = platform_resume, }; +EXPORT_SYMBOL_GPL(platform_bus_type); int __init platform_bus_init(void) { @@ -519,14 +529,3 @@ u64 dma_get_required_mask(struct device *dev) } EXPORT_SYMBOL_GPL(dma_get_required_mask); #endif - -EXPORT_SYMBOL_GPL(platform_bus); -EXPORT_SYMBOL_GPL(platform_bus_type); -EXPORT_SYMBOL_GPL(platform_add_devices); -EXPORT_SYMBOL_GPL(platform_device_register); -EXPORT_SYMBOL_GPL(platform_device_register_simple); -EXPORT_SYMBOL_GPL(platform_device_unregister); -EXPORT_SYMBOL_GPL(platform_get_irq); -EXPORT_SYMBOL_GPL(platform_get_resource); -EXPORT_SYMBOL_GPL(platform_get_irq_byname); -EXPORT_SYMBOL_GPL(platform_get_resource_byname); -- cgit v1.2.3-70-g09d2 From 874c6241b2e49e52680d32a50d4909c7768d5cb9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 13 Dec 2005 15:17:34 -0800 Subject: [PATCH] Driver core: only all userspace bind/unbind if CONFIG_HOTPLUG is enabled Thanks to drivers making their id tables __devinit, we can't allow userspace to bind or unbind drivers from devices manually through sysfs. So we only allow this if CONFIG_HOTPLUG is enabled. Cc: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/base/bus.c b/drivers/base/bus.c index e3f915a2489..29f6af554e7 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -428,6 +428,26 @@ static void driver_remove_attrs(struct bus_type * bus, struct device_driver * dr } } +#ifdef CONFIG_HOTPLUG +/* + * Thanks to drivers making their tables __devinit, we can't allow manual + * bind and unbind from userspace unless CONFIG_HOTPLUG is enabled. + */ +static void add_bind_files(struct device_driver *drv) +{ + driver_create_file(drv, &driver_attr_unbind); + driver_create_file(drv, &driver_attr_bind); +} + +static void remove_bind_files(struct device_driver *drv) +{ + driver_remove_file(drv, &driver_attr_bind); + driver_remove_file(drv, &driver_attr_unbind); +} +#else +static inline void add_bind_files(struct device_driver *drv) {} +static inline void remove_bind_files(struct device_driver *drv) {} +#endif /** * bus_add_driver - Add a driver to the bus. @@ -457,8 +477,7 @@ int bus_add_driver(struct device_driver * drv) module_add_driver(drv->owner, drv); driver_add_attrs(bus, drv); - driver_create_file(drv, &driver_attr_unbind); - driver_create_file(drv, &driver_attr_bind); + add_bind_files(drv); } return error; } @@ -476,8 +495,7 @@ int bus_add_driver(struct device_driver * drv) void bus_remove_driver(struct device_driver * drv) { if (drv->bus) { - driver_remove_file(drv, &driver_attr_bind); - driver_remove_file(drv, &driver_attr_unbind); + remove_bind_files(drv); driver_remove_attrs(drv->bus, drv); klist_remove(&drv->knode_bus); pr_debug("bus %s: remove driver %s\n", drv->bus->name, drv->name); -- cgit v1.2.3-70-g09d2 From 1f1bf132d81ed723bc5fefbcec7d0779ce683a4f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 12 Dec 2005 01:31:03 -0800 Subject: [PATCH] drivers/base/power/runtime.c: #if 0 dpm_set_power_state() This patch #if 0's an unused global function. Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/base/power/runtime.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index adbc3148c03..4bafef83e79 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -64,6 +64,7 @@ int dpm_runtime_suspend(struct device * dev, pm_message_t state) } +#if 0 /** * dpm_set_power_state - Update power_state field. * @dev: Device. @@ -80,3 +81,4 @@ void dpm_set_power_state(struct device * dev, pm_message_t state) dev->power.power_state = state; up(&dpm_sem); } +#endif /* 0 */ -- cgit v1.2.3-70-g09d2 From 3adfd4e2b8804e926a5245062ba8ee12e88d30c3 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Tue, 3 Jan 2006 12:50:30 -0800 Subject: [PATCH] Fix IXP4xx watchdog errata workaround The IXP4xx driver bails out on all A0 CPUs, but it should only do so on IXP42x as IXP46x has functioning HW. Signed-off-by: Deepak Saxena Signed-off-by: Linus Torvalds --- drivers/char/watchdog/ixp4xx_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/ixp4xx_wdt.c b/drivers/char/watchdog/ixp4xx_wdt.c index b5be8b11104..3800835ca8f 100644 --- a/drivers/char/watchdog/ixp4xx_wdt.c +++ b/drivers/char/watchdog/ixp4xx_wdt.c @@ -186,8 +186,8 @@ static int __init ixp4xx_wdt_init(void) unsigned long processor_id; asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :); - if (!(processor_id & 0xf)) { - printk("IXP4XXX Watchdog: Rev. A0 CPU detected - " + if (!(processor_id & 0xf) && !cpu_is_ixp46x()) { + printk("IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected - " "watchdog disabled\n"); return -ENODEV; -- cgit v1.2.3-70-g09d2