From 4a4c879904aa0cc64629e14a49b64fb3d149bf1a Mon Sep 17 00:00:00 2001 From: Dan Bastone Date: Sun, 31 Jul 2011 07:40:49 -0400 Subject: HID: add support for new revision of Apple aluminum keyboard Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum keyboard. I have only confirmed that the ANSI version is correct - it is assumed that the ISO and JIS versions follow the standard numbering convention. Signed-off-by: Dan Bastone Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 ++++++ drivers/hid/hid-core.c | 3 +++ drivers/hid/hid-ids.h | 3 +++ 3 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index b85744fe846..18b3bc646bf 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -444,6 +444,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS), + .driver_data = APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1a5cf0c9cfc..242353df3dc 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1340,6 +1340,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index db63ccf21cc..61c880939f5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -109,6 +109,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f +#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250 +#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b -- cgit v1.2.3-70-g09d2 From 18b08c55a9b04c8783420fb6657599ad724459cc Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Thu, 4 Aug 2011 23:39:58 -0700 Subject: Input: remove CLOCK_TICK_RATE from analog joystick driver The analog joystick driver is written for x86 systems. This patch updates it to use the PIT_TICK_RATE value instead of CLOCK_TICK_RATE as they are equivalent on x86 and we want to deprecate the latter. Signed-off-by: Deepak Saxena Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/analog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 4afe0a3b488..c02131785a3 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -139,7 +139,7 @@ struct analog_port { #include #define GET_TIME(x) do { if (cpu_has_tsc) rdtscl(x); else x = get_time_pit(); } while (0) -#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? CLOCK_TICK_RATE / HZ : 0))) +#define DELTA(x,y) (cpu_has_tsc ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0))) #define TIME_NAME (cpu_has_tsc?"TSC":"PIT") static unsigned int get_time_pit(void) { -- cgit v1.2.3-70-g09d2 From a88769cde24fcef11219cf99193ee558d1028217 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Jul 2011 10:11:28 -0700 Subject: firmware: fix google/gsmi.c build warning Modify function parameter type to match expected type. Fixes a build warning: drivers/firmware/google/gsmi.c:473: warning: initialization from incompatible pointer type Signed-off-by: Randy Dunlap Cc: Mike Waychison Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/google/gsmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c index 68810fd1a59..aa83de9db1b 100644 --- a/drivers/firmware/google/gsmi.c +++ b/drivers/firmware/google/gsmi.c @@ -420,7 +420,7 @@ static efi_status_t gsmi_get_next_variable(unsigned long *name_size, static efi_status_t gsmi_set_variable(efi_char16_t *name, efi_guid_t *vendor, - unsigned long attr, + u32 attr, unsigned long data_size, void *data) { -- cgit v1.2.3-70-g09d2 From 7de636fa25c19fc4187f85f8325c50b1b21a6d8b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Jul 2011 12:11:25 -0700 Subject: driver core: fix kernel-doc warning in platform.c Warning(drivers/base/platform.c:50): No description found for parameter 'pdev' Warning(drivers/base/platform.c:50): Excess function parameter 'dev' description in 'arch_setup_pdev_archdata' Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 0cad9c7f6bb..99a5272d7c2 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -33,7 +33,7 @@ EXPORT_SYMBOL_GPL(platform_bus); /** * arch_setup_pdev_archdata - Allow manipulation of archdata before its used - * @dev: platform device + * @pdev: platform device * * This is called before platform_device_add() such that any pdev_archdata may * be setup before the platform_notifier is called. So if a user needs to -- cgit v1.2.3-70-g09d2 From f9e0b159dbff693bacb64a929e04f442df985b50 Mon Sep 17 00:00:00 2001 From: Arnaud Lacombe Date: Thu, 21 Jul 2011 13:16:19 -0400 Subject: drivers/base/devtmpfs.c: correct annotation of `setup_done' This fixes the following section mismatch issue: WARNING: vmlinux.o(.text+0x1192bf): Section mismatch in reference from the function devtmpfsd() to the variable .init.data:setup_done The function devtmpfsd() references the variable __initdata setup_done. This is often because devtmpfsd lacks a __initdata annotation or the annotation of setup_done is wrong. WARNING: vmlinux.o(.text+0x119342): Section mismatch in reference from the function devtmpfsd() to the variable .init.data:setup_done The function devtmpfsd() references the variable __initdata setup_done. This is often because devtmpfsd lacks a __initdata annotation or the annotation of setup_done is wrong. Signed-off-by: Arnaud Lacombe Signed-off-by: Greg Kroah-Hartman --- drivers/base/devtmpfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c index 33e1bed68fd..a4760e095ff 100644 --- a/drivers/base/devtmpfs.c +++ b/drivers/base/devtmpfs.c @@ -376,7 +376,7 @@ int devtmpfs_mount(const char *mntdir) return err; } -static __initdata DECLARE_COMPLETION(setup_done); +static DECLARE_COMPLETION(setup_done); static int handle(const char *name, mode_t mode, struct device *dev) { -- cgit v1.2.3-70-g09d2 From b882fc1b03d46e67ffe06133f4f4532db6e8dd0d Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 28 Jul 2011 08:50:38 +0900 Subject: serial: samsung: Fix build error drivers/tty/serial/samsung.c: In function 's3c24xx_serial_init': drivers/tty/serial/samsung.c:1237: error: lvalue required as unary '&' operand Cc: Greg Kroah-Hartman Signed-off-by: Kukjin Kim Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index afc62942315..6edafb5ace1 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { .suspend = s3c24xx_serial_suspend, .resume = s3c24xx_serial_resume, }; +#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) + #else /* !CONFIG_PM_SLEEP */ -#define s3c24xx_serial_pm_ops NULL + +#define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - drv->driver.pm = &s3c24xx_serial_pm_ops; + + drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; return platform_driver_register(drv); } -- cgit v1.2.3-70-g09d2 From cd566c64f50e568c0ac3c13bdd15f523631ce845 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 8 Aug 2011 23:39:59 -0700 Subject: Input: mma8450 - fix module device table type The module device table for of_device_id should use "of" type. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/misc/mma8450.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 6c76cf79299..0794778295f 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -234,7 +234,7 @@ static const struct of_device_id mma8450_dt_ids[] = { { .compatible = "fsl,mma8450", }, { /* sentinel */ } }; -MODULE_DEVICE_TABLE(i2c, mma8450_dt_ids); +MODULE_DEVICE_TABLE(of, mma8450_dt_ids); static struct i2c_driver mma8450_driver = { .driver = { -- cgit v1.2.3-70-g09d2 From db0b34b07438d92c4c190998c42a502fbf90064e Mon Sep 17 00:00:00 2001 From: "Joshua V. Dillon" Date: Mon, 8 Aug 2011 23:45:14 -0700 Subject: Input: bcm5974 - add support for touchpads found in MacBookAir4,2 Added USB device IDs for MacBookAir4,2 trackpad. Device constants were copied from the MacBookAir3,2 constants. The 4,2 device specification is reportedly unchanged from the 3,2 predecessor and seems to work well. Signed-off-by: Joshua V Dillon Signed-off-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 3126983c004..48d9ec13d32 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -67,6 +67,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +/* MacbookAir4,2 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c +#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d +#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -104,6 +108,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), + /* MacbookAir4,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS), /* Terminating entry */ {} }; @@ -294,6 +302,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4415, 5050 }, { DIM_Y, DIM_Y / SN_COORD, -55, 6680 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + }, {} }; -- cgit v1.2.3-70-g09d2 From 5ac04bf190e6f8b17238aef179ebd7f2bdfec919 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 3 Aug 2011 16:46:48 +0800 Subject: xHCI: fix port U3 status check condition Fix the port U3 status check when Clear PORT_SUSPEND Feature. The port status should be masked with PORT_PLS_MASK to check if it's in U3 state. This should be backported to kernels as old as 2.6.37. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0be788cc2fd..cddcdccadbf 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -664,7 +664,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) goto error; - if (temp & XDEV_U3) { + if ((temp & PORT_PLS_MASK) == XDEV_U3) { if ((temp & PORT_PE) == 0) goto error; -- cgit v1.2.3-70-g09d2 From 8a8ff2f9399b23b968901f585ccb5a70a537c5ae Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 3 Aug 2011 16:46:49 +0800 Subject: xHCI: report USB2 port in resuming as suspend When a USB2 port initiate a remote wakeup, software shall ensure that resume is signaled for at least 20ms, and then write '0' to the PLS field. According to this, xhci driver do the following things: 1. When receive a remote wakeup event in irq_handler, set the resume_done value as jiffies + 20ms, and modify rh_timer to poll root hub status at that time; 2. When receive a GetPortStatus request, if the jiffies is after the resume_done value, clear the resume signal and resume_done. However, if usb_port_resume() is called before the rh_timer triggered, it will indicate the port as Suspend Cleared and skip the clear resume signal part. The device will fail the usb_get_status request in finish_port_resume(), and usbcore will try a reset-resume instead. Device will work OK after reset-resume, but resume_done value is not cleared in this case, and xhci_bus_suspend() will fail because when it finds a non-zero resume_done value, it will regard the port as resuming and return -EBUSY. This causes issue on some platforms that the system fail to suspend after remote wakeup from suspend by USB2 devices connected to xHCI port. To fix this issue, report the port status as suspend if the resume is signaling less that 20ms, and usb_port_resume() will wait 25ms and check port status again, so xHCI driver can clear the resume signaling and resume_done value. This should be backported to kernels as old as 2.6.37. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-hub.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index cddcdccadbf..1e96d1f1fe6 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -463,11 +463,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, && (temp & PORT_POWER)) status |= USB_PORT_STAT_SUSPEND; } - if ((temp & PORT_PLS_MASK) == XDEV_RESUME) { + if ((temp & PORT_PLS_MASK) == XDEV_RESUME && + !DEV_SUPERSPEED(temp)) { if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; - if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { + if (time_after_eq(jiffies, + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; @@ -487,6 +488,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); bus_state->port_c_suspend |= 1 << wIndex; bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * 20ms. Report the port status as SUSPEND, + * let the usbcore check port status again + * and clear resume signaling later. + */ + status |= USB_PORT_STAT_SUSPEND; } } if ((temp & PORT_PLS_MASK) == XDEV_U0 -- cgit v1.2.3-70-g09d2 From d13565c12828ce0cd2a3862bf6260164a0653352 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 22 Jul 2011 14:34:34 -0700 Subject: xhci: Fix memory leak during failed enqueue. When the isochronous transfer support was introduced, and the xHCI driver switched to using urb->hcpriv to store an "urb_priv" pointer, a couple of memory leaks were introduced into the URB enqueue function in its error handling paths. xhci_urb_enqueue allocates urb_priv, but it doesn't free it if changing the control endpoint's max packet size fails or the bulk endpoint is in the middle of allocating or deallocating streams. xhci_urb_enqueue also doesn't free urb_priv if any of the four endpoint types' enqueue functions fail. Instead, it expects those functions to free urb_priv if an error occurs. However, the bulk, control, and interrupt enqueue functions do not free urb_priv if the endpoint ring is NULL. It will, however, get freed if prepare_transfer() fails in those enqueue functions. Several of the error paths in the isochronous endpoint enqueue function also fail to free it. xhci_queue_isoc_tx_prepare() doesn't free urb_priv if prepare_ring() indicates there is not enough room for all the isochronous TDs in this URB. If individual isochronous TDs fail to be queued (perhaps due to an endpoint state change), urb_priv is also leaked. This argues that the freeing of urb_priv should be done in the function that allocated it, xhci_urb_enqueue. This patch looks rather ugly, but refactoring the code will have to wait because this patch needs to be backported to stable kernels. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 5 +---- drivers/usb/host/xhci.c | 21 +++++++++++++++++---- 2 files changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 7113d16e2d3..9d3f9dd1ad2 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2500,11 +2500,8 @@ static int prepare_transfer(struct xhci_hcd *xhci, if (td_index == 0) { ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); - if (unlikely(ret)) { - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; + if (unlikely(ret)) return ret; - } } td->urb = urb; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1c4432d8fc1..8e84acff113 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1085,8 +1085,11 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) if (urb->dev->speed == USB_SPEED_FULL) { ret = xhci_check_maxpacket(xhci, slot_id, ep_index, urb); - if (ret < 0) + if (ret < 0) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; return ret; + } } /* We have a spinlock and interrupts disabled, so we must pass @@ -1097,6 +1100,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1117,6 +1122,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); } + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { spin_lock_irqsave(&xhci->lock, flags); @@ -1124,6 +1131,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } else { spin_lock_irqsave(&xhci->lock, flags); @@ -1131,18 +1140,22 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) goto dying; ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + if (ret) + goto free_priv; spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: - xhci_urb_free_priv(xhci, urb_priv); - urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); + ret = -ESHUTDOWN; +free_priv: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; spin_unlock_irqrestore(&xhci->lock, flags); - return -ESHUTDOWN; + return ret; } /* Get the right ring for the given URB. -- cgit v1.2.3-70-g09d2 From 522989a27c7badb608155b1f1dea3487ed431f74 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 29 Jul 2011 12:44:32 -0700 Subject: xhci: Fix failed enqueue in the middle of isoch TD. When an isochronous transfer is enqueued, xhci_queue_isoc_tx_prepare() will ensure that there is enough room on the transfer rings for all of the isochronous TDs for that URB. However, when xhci_queue_isoc_tx() is enqueueing individual isoc TDs, the prepare_transfer() function can fail if the endpoint state has changed to disabled, error, or some other unknown state. With the current code, if Nth TD (not the first TD) fails, the ring is left in a sorry state. The partially enqueued TDs are left on the ring, and the first TRB of the TD is not given back to the hardware. The enqueue pointer is left on the TRB after the last successfully enqueued TD. This means the ring is basically useless. Any new transfers will be enqueued after the failed TDs, which the hardware will never read because the cycle bit indicates it does not own them. The ring will fill up with untransferred TDs, and the endpoint will be basically unusable. The untransferred TDs will also remain on the TD list. Since the td_list is a FIFO, this basically means the ring handler will be waiting on TDs that will never be completed (or worse, dereference memory that doesn't exist any more). Change the code to clean up the isochronous ring after a failed transfer. If the first TD failed, simply return and allow the xhci_urb_enqueue function to free the urb_priv. If the Nth TD failed, first remove the TDs from the td_list. Then convert the TRBs that were enqueued into No-op TRBs. Make sure to flip the cycle bit on all enqueued TRBs (including any link TRBs in the middle or between TDs), but leave the cycle bit of the first TRB (which will show software-owned) intact. Then move the ring enqueue pointer back to the first TRB and make sure to change the xhci_ring's cycle state to what is appropriate for that ring segment. This ensures that the No-op TRBs will be overwritten by subsequent TDs, and the hardware will not start executing random TRBs because the cycle bit was left as hardware-owned. This bug is unlikely to be hit, but it was something I noticed while tracking down the watchdog timer issue. I verified that the fix works by injecting some errors on the 250th isochronous URB queued, although I could not verify that the ring is in the correct state because uvcvideo refused to talk to the device after the first usb_submit_urb() failed. Ring debugging shows that the ring looks correct, however. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 50 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 44 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9d3f9dd1ad2..f72149b666b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -514,8 +514,12 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, (unsigned long long) addr); } +/* flip_cycle means flip the cycle bit of all but the first and last TRB. + * (The last TRB actually points to the ring enqueue pointer, which is not part + * of this TD.) This is used to remove partially enqueued isoc TDs from a ring. + */ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, - struct xhci_td *cur_td) + struct xhci_td *cur_td, bool flip_cycle) { struct xhci_segment *cur_seg; union xhci_trb *cur_trb; @@ -528,6 +532,12 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, * leave the pointers intact. */ cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN); + /* Flip the cycle bit (link TRBs can't be the first + * or last TRB). + */ + if (flip_cycle) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); xhci_dbg(xhci, "Cancel (unchain) link TRB\n"); xhci_dbg(xhci, "Address = %p (0x%llx dma); " "in seg %p (0x%llx dma)\n", @@ -541,6 +551,11 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, cur_trb->generic.field[2] = 0; /* Preserve only the cycle bit of this TRB */ cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE); + /* Flip the cycle bit except on the first or last TRB */ + if (flip_cycle && cur_trb != cur_td->first_trb && + cur_trb != cur_td->last_trb) + cur_trb->generic.field[3] ^= + cpu_to_le32(TRB_CYCLE); cur_trb->generic.field[3] |= cpu_to_le32( TRB_TYPE(TRB_TR_NOOP)); xhci_dbg(xhci, "Cancel TRB %p (0x%llx dma) " @@ -719,7 +734,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, cur_td->urb->stream_id, cur_td, &deq_state); else - td_to_noop(xhci, ep_ring, cur_td); + td_to_noop(xhci, ep_ring, cur_td, false); remove_finished_td: /* * The event handler won't see a completion for this TD anymore, @@ -3223,6 +3238,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, start_trb = &ep_ring->enqueue->generic; start_cycle = ep_ring->cycle_state; + urb_priv = urb->hcpriv; /* Queue the first TRB, even if it's zero-length */ for (i = 0; i < num_tds; i++) { unsigned int total_packet_count; @@ -3246,12 +3262,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, trbs_per_td, urb, i, mem_flags); - if (ret < 0) - return ret; + if (ret < 0) { + if (i == 0) + return ret; + goto cleanup; + } - urb_priv = urb->hcpriv; td = urb_priv->td[i]; - for (j = 0; j < trbs_per_td; j++) { u32 remainder = 0; field = TRB_TBC(burst_count) | TRB_TLBPC(residue); @@ -3341,6 +3358,27 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; +cleanup: + /* Clean up a partially enqueued isoc transfer. */ + + for (i--; i >= 0; i--) + list_del(&urb_priv->td[i]->td_list); + + /* Use the first TD as a temporary variable to turn the TDs we've queued + * into No-ops with a software-owned cycle bit. That way the hardware + * won't accidentally start executing bogus TDs when we partially + * overwrite them. td->first_trb and td->start_seg are already set. + */ + urb_priv->td[0]->last_trb = ep_ring->enqueue; + /* Every TRB except the first & last will have its cycle bit flipped. */ + td_to_noop(xhci, ep_ring, urb_priv->td[0], true); + + /* Reset the ring enqueue back to the first TRB and its cycle bit. */ + ep_ring->enqueue = urb_priv->td[0]->first_trb; + ep_ring->enq_seg = urb_priv->td[0]->start_seg; + ep_ring->cycle_state = start_cycle; + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); + return ret; } /* -- cgit v1.2.3-70-g09d2 From 585df1d90cb07a02ca6c7a7d339e56e46d50dafb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 2 Aug 2011 15:43:40 -0700 Subject: xhci: Remove TDs from TD lists when URBs are canceled. When a driver tries to cancel an URB, and the host controller is dying, xhci_urb_dequeue will giveback the URB without removing the xhci_tds that comprise that URB from the td_list or the cancelled_td_list. This can cause a race condition between the driver calling URB dequeue and the stop endpoint command watchdog timer. If the timer fires on a dying host, and a driver attempts to resubmit while the watchdog timer has dropped the xhci->lock to giveback a cancelled URB, URBs may be given back by the xhci_urb_dequeue() function. At that point, the URB's priv pointer will be freed and set to NULL, but the TDs will remain on the td_list. This will cause an oops in xhci_giveback_urb_in_irq() when the watchdog timer attempts to loop through the endpoints' td_lists, giving back killed URBs. Make sure that xhci_urb_dequeue() removes TDs from the TD lists and canceled TD lists before it gives back the URB. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 16 ++++++++-------- drivers/usb/host/xhci.c | 7 +++++++ 2 files changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f72149b666b..b2d654b7477 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -741,7 +741,7 @@ remove_finished_td: * so remove it from the endpoint ring's TD list. Keep it in * the cancelled TD list for URB completion later. */ - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); } last_unlinked_td = cur_td; xhci_stop_watchdog_timer_in_irq(xhci, ep); @@ -769,7 +769,7 @@ remove_finished_td: do { cur_td = list_entry(ep->cancelled_td_list.next, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); /* Clean up the cancelled URB */ /* Doesn't matter what we pass for status, since the core will @@ -877,9 +877,9 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) cur_td = list_first_entry(&ring->td_list, struct xhci_td, td_list); - list_del(&cur_td->td_list); + list_del_init(&cur_td->td_list); if (!list_empty(&cur_td->cancelled_td_list)) - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -888,7 +888,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) &temp_ep->cancelled_td_list, struct xhci_td, cancelled_td_list); - list_del(&cur_td->cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN, "killed"); } @@ -1580,10 +1580,10 @@ td_cleanup: else *status = 0; } - list_del(&td->td_list); + list_del_init(&td->td_list); /* Was this TD slated to be cancelled but completed anyway? */ if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); + list_del_init(&td->cancelled_td_list); urb_priv->td_cnt++; /* Giveback the urb when all the tds are completed */ @@ -3362,7 +3362,7 @@ cleanup: /* Clean up a partially enqueued isoc transfer. */ for (i--; i >= 0; i--) - list_del(&urb_priv->td[i]->td_list); + list_del_init(&urb_priv->td[i]->td_list); /* Use the first TD as a temporary variable to turn the TDs we've queued * into No-ops with a software-owned cycle bit. That way the hardware diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8e84acff113..3a0f695138f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1252,6 +1252,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + if (!list_empty(&td->td_list)) + list_del_init(&td->td_list); + if (!list_empty(&td->cancelled_td_list)) + list_del_init(&td->cancelled_td_list); + } usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); -- cgit v1.2.3-70-g09d2 From d9b830fa444c1f4955d0ee88f5af2aa24d2c7837 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 11 Aug 2011 09:19:29 -0700 Subject: Input: mpu3050 - correct call to input_free_device input_free_device() should be used if input_register_device() was not called yet or if it failed. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/misc/mpu3050.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index b95fac15b2e..f71dc728da5 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -282,7 +282,7 @@ err_free_irq: err_pm_set_suspended: pm_runtime_set_suspended(&client->dev); err_free_mem: - input_unregister_device(idev); + input_free_device(idev); kfree(sensor); return error; } -- cgit v1.2.3-70-g09d2 From 22f83205e59c97c2460ad8e4bd6e71268cb2f37f Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 11 Aug 2011 09:22:45 -0700 Subject: Input: tegra-kbc - correct call to input_free_device If kzalloc for kbc fails, then we have NULL pointer dereference while calling input_free_device(kbc->idev) in the error handling. So it is safer to always use the original name, input_dev. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index f270447ba95..a5a77915c65 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -702,7 +702,7 @@ err_iounmap: err_free_mem_region: release_mem_region(res->start, resource_size(res)); err_free_mem: - input_free_device(kbc->idev); + input_free_device(input_dev); kfree(kbc); return err; -- cgit v1.2.3-70-g09d2 From 4b1bfb7d2d125af6653d6c2305356b2677f79dc6 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 10 Aug 2011 15:32:22 +0200 Subject: rt2x00: fix crash in rt2800usb_write_tx_desc Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [] rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] *pdpt = 000000002408c001 *pde = 0000000024079067 *pte = 0000000000000000 Oops: 0000 [#1] SMP EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] EAX: 00000035 EBX: ef2bef10 ECX: 00000000 EDX: d40958a0 ESI: ef1865f8 EDI: ef1865f8 EBP: d4095878 ESP: d409585c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [] rt2x00queue_write_tx_frame+0x155/0x300 [rt2x00lib] [] rt2x00mac_tx+0x7c/0x370 [rt2x00lib] [] ? mark_held_locks+0x62/0x90 [] ? _raw_spin_unlock_irqrestore+0x35/0x60 [] ? trace_hardirqs_on_caller+0x5a/0x170 [] ? trace_hardirqs_on+0xb/0x10 [] __ieee80211_tx+0x5c/0x1e0 [mac80211] [] ieee80211_tx+0xbc/0xe0 [mac80211] [] ? ieee80211_tx+0x23/0xe0 [mac80211] [] ieee80211_xmit+0xc1/0x200 [mac80211] [] ? ieee80211_tx+0xe0/0xe0 [mac80211] [] ? lock_release_holdtime+0x35/0x1b0 [] ? ieee80211_subif_start_xmit+0x446/0x5f0 [mac80211] [] ieee80211_subif_start_xmit+0x29d/0x5f0 [mac80211] [] ? ieee80211_subif_start_xmit+0x3e4/0x5f0 [mac80211] [] ? sock_setsockopt+0x6a8/0x6f0 [] ? sock_setsockopt+0x520/0x6f0 [] dev_hard_start_xmit+0x2ef/0x650 Oops might happen because we perform parallel putting new entries in a queue (rt2x00queue_write_tx_frame()) and removing entries after finishing transmitting (rt2800usb_work_txdone()). There are cases when _txdone may process an entry that was not fully send and nullify entry->skb . To fix check in _txdone if entry has flags that indicate pending transmission and wait until flags get cleared. Reported-by: Justin Piszcz Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 939563162fb..2cb25ea13c5 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -464,6 +464,15 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) int wcid, ack, pid; int tx_wcid, tx_ack, tx_pid; + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) { + WARNING(entry->queue->rt2x00dev, + "Data pending for entry %u in queue %u\n", + entry->entry_idx, entry->queue->qid); + cond_resched(); + return false; + } + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); @@ -558,8 +567,10 @@ static void rt2800usb_work_txdone(struct work_struct *work) while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) break; + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); else if (rt2x00queue_status_timeout(entry)) -- cgit v1.2.3-70-g09d2 From df71c9cfceea801e7e26e2c74241758ef9c042e5 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 10 Aug 2011 15:32:23 +0200 Subject: rt2x00: fix order of entry flags modification In rt2800usb_work_txdone we check flags in order: - ENTRY_OWNER_DEVICE_DATA - ENTRY_DATA_STATUS_PENDING - ENTRY_DATA_IO_FAILED Modify flags in separate order in rt2x00usb_interrupt_txdone, to avoid processing entries in _txdone with wrong flags or skip processing ready entries. Reported-by: Justin Piszcz Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index b6b4542c246..7fbb55c9da8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -262,23 +262,20 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; - - if (rt2x00dev->ops->lib->tx_dma_done) - rt2x00dev->ops->lib->tx_dma_done(entry); - - /* - * Report the frame as DMA done - */ - rt2x00lib_dmadone(entry); - /* * Check if the frame was correctly uploaded */ if (urb->status) set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); + /* + * Report the frame as DMA done + */ + rt2x00lib_dmadone(entry); + if (rt2x00dev->ops->lib->tx_dma_done) + rt2x00dev->ops->lib->tx_dma_done(entry); /* * Schedule the delayed work for reading the TX status * from the device. -- cgit v1.2.3-70-g09d2 From 674db1344443204b6ce3293f2df8fd1b7665deea Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 10 Aug 2011 15:32:24 +0200 Subject: rt2x00: fix crash in rt2800usb_get_txwi Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [] rt2800usb_get_txwi+0x19/0x70 [rt2800usb] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 198, comm: kworker/u:3 Tainted: G W 3.0.0-wl+ #9 LENOVO 6369CTO/6369CTO EIP: 0060:[] EFLAGS: 00010283 CPU: 1 EIP is at rt2800usb_get_txwi+0x19/0x70 [rt2800usb] EAX: 00000000 EBX: f465e140 ECX: f4494960 EDX: ef24c5f8 ESI: 810f21f5 EDI: f1da9960 EBP: f4581e80 ESP: f4581e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:3 (pid: 198, ti=f4580000 task=f4494960 task.ti=f4580000) Call Trace: [] rt2800_txdone_entry+0x2f/0xf0 [rt2800lib] [] ? warn_slowpath_common+0x7d/0xa0 [] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [] rt2800usb_work_txdone+0x263/0x360 [rt2800usb] [] process_one_work+0x186/0x440 [] ? process_one_work+0x10a/0x440 [] ? rt2800usb_probe_hw+0x120/0x120 [rt2800usb] [] worker_thread+0x133/0x310 [] ? trace_hardirqs_on+0xb/0x10 [] ? manage_workers+0x1e0/0x1e0 [] kthread+0x7c/0x90 [] ? __init_kthread_worker+0x60/0x60 [] kernel_thread_helper+0x6/0x1 Oops might happen because we check rt2x00queue_empty(queue) twice, but this condition can change and we can process entry in rt2800_txdone_entry(), which was already processed by rt2800usb_txdone_entry_check() -> rt2x00lib_txdone_noinfo() and has nullify entry->skb . Reported-by: Justin Piszcz Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 2cb25ea13c5..dbf501ca317 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -538,12 +538,11 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev) entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); if (rt2800usb_txdone_entry_check(entry, reg)) break; + entry = NULL; } - if (!entry || rt2x00queue_empty(queue)) - break; - - rt2800_txdone_entry(entry, reg); + if (entry) + rt2800_txdone_entry(entry, reg); } } -- cgit v1.2.3-70-g09d2 From 567b20e02bc1b2bcd69e8bfc022dec3da3fefb89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 12 Jul 2011 19:05:29 +0800 Subject: usb: gadget: s3c2410_udc: fix unterminated platform_device_id table platform_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 85c1b0d6629..8d31848aab0 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -2060,6 +2060,7 @@ static int s3c2410_udc_resume(struct platform_device *pdev) static const struct platform_device_id s3c_udc_ids[] = { { "s3c2410-usbgadget", }, { "s3c2440-usbgadget", }, + { } }; MODULE_DEVICE_TABLE(platform, s3c_udc_ids); -- cgit v1.2.3-70-g09d2 From aba1350fdac7cb52f86e6818addb26d03b3ef9bc Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 19 Jul 2011 21:47:01 +0200 Subject: usb: gadget: fusb300: remove #if 0 block The code in this block is unused and the Author is fine with removing: | These functions were used to debug unstable hw fifo while developing | fusb300. It's much more stable now. | So these functions can be removed. Cc: "Wendy Yuan-Hsin Chen" Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fusb300_udc.c | 101 --------------------------------------- 1 file changed, 101 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 24a924330c8..4ec888f9000 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -609,107 +609,6 @@ void fusb300_rdcxf(struct fusb300 *fusb300, } } -#if 0 -static void fusb300_dbg_fifo(struct fusb300_ep *ep, - u8 entry, u16 length) -{ - u32 reg; - u32 i = 0; - u32 j = 0; - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); - reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | - FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); - reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | - FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); - iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); - - for (i = 0; i < (length >> 2); i++) { - if (i * 4 == 1024) - break; - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG" 0x%-8x", reg); - j++; - if ((j % 4) == 0) - printk(KERN_DEBUG "\n"); - } - - if (length % 4) { - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i * 4); - printk(KERN_DEBUG " 0x%x\n", reg); - } - - if ((j % 4) != 0) - printk(KERN_DEBUG "\n"); - - fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, - FUSB300_GTM_TST_FIFO_DEG); -} - -static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep, - u8 entry, u16 length, u8 *golden) -{ - u32 reg; - u32 i = 0; - u32 golden_value; - u8 *tmp; - - tmp = golden; - - printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry); - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); - reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | - FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); - reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | - FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); - iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); - - for (i = 0; i < (length >> 2); i++) { - if (i * 4 == 1024) - break; - golden_value = *tmp | *(tmp + 1) << 8 | - *(tmp + 2) << 16 | *(tmp + 3) << 24; - - reg = ioread32(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4); - - if (reg != golden_value) { - printk(KERN_DEBUG "0x%x : ", (u32)(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4)); - printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", - golden_value, reg); - } - tmp += 4; - } - - switch (length % 4) { - case 1: - golden_value = *tmp; - case 2: - golden_value = *tmp | *(tmp + 1) << 8; - case 3: - golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; - default: - break; - - reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4); - if (reg != golden_value) { - printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg + - FUSB300_OFFSET_BUFDBG_START + i*4)); - printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", - golden_value, reg); - } - } - - printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n"); - fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, - FUSB300_GTM_TST_FIFO_DEG); -} -#endif - static void fusb300_rdfifo(struct fusb300_ep *ep, struct fusb300_request *req, u32 length) -- cgit v1.2.3-70-g09d2 From 6a22158c596c1531b143c884d479285ef90608d1 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 19 Jul 2011 20:21:52 +0200 Subject: usb: gadget: composite: fix bMaxPacketSize for SuperSpeed For bMaxPacketSize0 we usually take what is specified in ep0->maxpacket. This is fine in most cases, however on SuperSpeed bMaxPacketSize0 specifies the exponent instead of the actual size in bytes. The only valid value on SS is 9 which denotes 512 bytes. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5ef87794fd3..aef47414f5d 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1079,10 +1079,12 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) cdev->desc.bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; if (gadget_is_superspeed(gadget)) { - if (gadget->speed >= USB_SPEED_SUPER) + if (gadget->speed >= USB_SPEED_SUPER) { cdev->desc.bcdUSB = cpu_to_le16(0x0300); - else + cdev->desc.bMaxPacketSize0 = 9; + } else { cdev->desc.bcdUSB = cpu_to_le16(0x0210); + } } value = min(w_length, (u16) sizeof cdev->desc); -- cgit v1.2.3-70-g09d2 From 74c6f3a42a5af424dd954916a5e69d00271b943a Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Sun, 17 Jul 2011 18:28:00 +0300 Subject: usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclared CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich Signed-off-by: Felipe Balbi --- drivers/usb/musb/tusb6010_omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index c784e6c03aa..07c8a73dfe4 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -89,7 +89,7 @@ static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat) u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP); if (reg != 0) { - dev_dbg(musb->controller, "ep%i dmareq0 is busy for ep%i\n", + dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n", chdat->epnum, reg & 0xf); return -EAGAIN; } -- cgit v1.2.3-70-g09d2 From 26e5c3e227d15a44402e1c9ab817fe48142b4b99 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 Jul 2011 18:38:47 +0530 Subject: usb: musb: fix Kconfig After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent Signed-off-by: Felipe Balbi --- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/musb/Kconfig | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 44b6b40aafb..5a084b9cfa3 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -310,7 +310,7 @@ config USB_PXA_U2O # musb builds in ../musb along with host support config USB_GADGET_MUSB_HDRC tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)" - depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG) + depends on USB_MUSB_HDRC select USB_GADGET_DUALSPEED help This OTG-capable silicon IP is used in dual designs including diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 6192b45959f..fc34b8b1191 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -3,9 +3,6 @@ # for silicon based on Mentor Graphics INVENTRA designs # -comment "Enable Host or Gadget support to see Inventra options" - depends on !USB && USB_GADGET=n - # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on USB && USB_GADGET -- cgit v1.2.3-70-g09d2 From 71964b9a0c06f2804be3b6ff47fab07a9468ecb4 Mon Sep 17 00:00:00 2001 From: Sebastian Bauer Date: Thu, 21 Jul 2011 15:40:07 +0200 Subject: usb: gadget: hid: don't STALL when processing a HID Descriptor request This is a patch to fix an issue with the HID gadget which, at the moment, returns STALL on a HID descriptor request. Essentially, the patch changes the hid gadget such that a request for the HID descriptor is handled by copying the descriptor into the response buffer, rather than falling through the default case, in which the request is answered by a STALL. Signed-off-by: Sebastian Bauer Acked-by: Peter Korsgaard Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_hid.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 403a48bcf56..83a266bdb40 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -367,6 +367,13 @@ static int hidg_setup(struct usb_function *f, case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8 | USB_REQ_GET_DESCRIPTOR): switch (value >> 8) { + case HID_DT_HID: + VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: HID\n"); + length = min_t(unsigned short, length, + hidg_desc.bLength); + memcpy(req->buf, &hidg_desc, length); + goto respond; + break; case HID_DT_REPORT: VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n"); length = min_t(unsigned short, length, -- cgit v1.2.3-70-g09d2 From 15154962f777e4ab38adb7641ccae92194c9a96b Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Thu, 28 Jul 2011 22:59:53 +0800 Subject: usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1) Obviously, disabling & put regulator and iounmap(hcd->regs) are missed in .remove and failure handling path of .probe, so add them. Signed-off-by: Ming Lei Acked-by: Alan Stern Tested-by: Keshava Munegowda Signed-off-by: Felipe Balbi --- drivers/usb/host/ehci-omap.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 55a57c23dd0..45240321ca0 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -98,6 +98,18 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static void disable_put_regulator( + struct ehci_hcd_omap_platform_data *pdata) +{ + int i; + + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (pdata->regulator[i]) { + regulator_disable(pdata->regulator[i]); + regulator_put(pdata->regulator[i]); + } + } +} /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -231,9 +243,11 @@ err_add_hcd: omap_usbhs_disable(dev); err_enable: + disable_put_regulator(pdata); usb_put_hcd(hcd); err_io: + iounmap(regs); return ret; } @@ -253,6 +267,8 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) usb_remove_hcd(hcd); omap_usbhs_disable(dev); + disable_put_regulator(dev->platform_data); + iounmap(hcd->regs); usb_put_hcd(hcd); return 0; } -- cgit v1.2.3-70-g09d2 From 93e098a8fc02c579875e64001f7a511b7e75a16c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 20 Jul 2011 17:09:34 -0700 Subject: usb: musb: fix oops on musb_gadget_pullup an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer Signed-off-by: John Stultz Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index b67a062f556..8c41a2e6ea7 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1698,6 +1698,8 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) is_on = !!is_on; + pm_runtime_get_sync(musb->controller); + /* NOTE: this assumes we are sensing vbus; we'd rather * not pullup unless the B-session is active. */ @@ -1707,6 +1709,9 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) musb_pullup(musb, is_on); } spin_unlock_irqrestore(&musb->lock, flags); + + pm_runtime_put(musb->controller); + return 0; } -- cgit v1.2.3-70-g09d2 From d366d39bab562545ccb4a5931d62d0fd9e6a8ffc Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Tue, 2 Aug 2011 17:33:39 +0200 Subject: usb: musb: ux500: set dma config for both src and dst The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin Acked-by: Mian Yousaf Kaukab Acked-by: Linus Walleij Signed-off-by: Felipe Balbi --- drivers/usb/musb/ux500_dma.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index cecace41183..23134754b7c 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -133,15 +133,13 @@ static bool ux500_configure_channel(struct dma_channel *channel, DMA_SLAVE_BUSWIDTH_4_BYTES; slave_conf.direction = direction; - if (direction == DMA_FROM_DEVICE) { - slave_conf.src_addr = usb_fifo_addr; - slave_conf.src_addr_width = addr_width; - slave_conf.src_maxburst = 16; - } else { - slave_conf.dst_addr = usb_fifo_addr; - slave_conf.dst_addr_width = addr_width; - slave_conf.dst_maxburst = 16; - } + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + dma_chan->device->device_control(dma_chan, DMA_SLAVE_CONFIG, (unsigned long) &slave_conf); -- cgit v1.2.3-70-g09d2 From afbd0749c0507d5fea980b3bfa76efc43af83d60 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Wed, 3 Aug 2011 14:22:17 +0200 Subject: usb: musb: ux500: replace missing DBG with dev_dbg ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Cc: stable@vger.kernel.org Signed-off-by: Per Forlin Acked-by: Mian Yousaf Kaukab Signed-off-by: Felipe Balbi --- drivers/usb/musb/ux500_dma.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 23134754b7c..ef4333f4bbe 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -65,7 +65,8 @@ static void ux500_tx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA tx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA tx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -84,7 +85,8 @@ static void ux500_rx_work(struct work_struct *data) struct musb *musb = hw_ep->musb; unsigned long flags; - DBG(4, "DMA rx transfer done on hw_ep=%d\n", hw_ep->epnum); + dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", + hw_ep->epnum); spin_lock_irqsave(&musb->lock, flags); ux500_channel->channel.actual_len = ux500_channel->cur_len; @@ -116,9 +118,11 @@ static bool ux500_configure_channel(struct dma_channel *channel, enum dma_slave_buswidth addr_width; dma_addr_t usb_fifo_addr = (MUSB_FIFO_OFFSET(hw_ep->epnum) + ux500_channel->controller->phy_base); + struct musb *musb = ux500_channel->controller->private_data; - DBG(4, "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", - packet_sz, mode, dma_addr, len, ux500_channel->is_tx); + dev_dbg(musb->controller, + "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", + packet_sz, mode, dma_addr, len, ux500_channel->is_tx); ux500_channel->cur_len = len; @@ -164,6 +168,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, struct ux500_dma_controller *controller = container_of(c, struct ux500_dma_controller, controller); struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; u8 ch_num = hw_ep->epnum - 1; u32 max_ch; @@ -190,7 +195,7 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, ux500_channel->hw_ep = hw_ep; ux500_channel->is_allocated = 1; - DBG(7, "hw_ep=%d, is_tx=0x%x, channel=%d\n", + dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", hw_ep->epnum, is_tx, ch_num); return &(ux500_channel->channel); @@ -199,8 +204,9 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, static void ux500_dma_channel_release(struct dma_channel *channel) { struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb *musb = ux500_channel->controller->private_data; - DBG(7, "channel=%d\n", ux500_channel->ch_num); + dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); if (ux500_channel->is_allocated) { ux500_channel->is_allocated = 0; @@ -250,8 +256,8 @@ static int ux500_dma_channel_abort(struct dma_channel *channel) void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; u16 csr; - DBG(4, "channel=%d, is_tx=%d\n", ux500_channel->ch_num, - ux500_channel->is_tx); + dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", + ux500_channel->ch_num, ux500_channel->is_tx); if (channel->status == MUSB_DMA_STATUS_BUSY) { if (ux500_channel->is_tx) { -- cgit v1.2.3-70-g09d2 From f847a79ab3c1faca3022061045cd22e4678c1b1c Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Wed, 3 Aug 2011 15:39:15 +0200 Subject: usb: musb: cppi: fix build errors due to DBG and missing musb variable Replace DBG with dev_dbg and fix invalid access of musb->controller. With this patch cppi_dma builds successfully. Cc: Signed-off-by: Per Forlin Signed-off-by: Felipe Balbi --- drivers/usb/musb/cppi_dma.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 149f3f310a0..318fb4e8a88 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -226,8 +226,10 @@ static int cppi_controller_stop(struct dma_controller *c) struct cppi *controller; void __iomem *tibase; int i; + struct musb *musb; controller = container_of(c, struct cppi, controller); + musb = controller->musb; tibase = controller->tibase; /* DISABLE INDIVIDUAL CHANNEL Interrupts */ @@ -289,9 +291,11 @@ cppi_channel_allocate(struct dma_controller *c, u8 index; struct cppi_channel *cppi_ch; void __iomem *tibase; + struct musb *musb; controller = container_of(c, struct cppi, controller); tibase = controller->tibase; + musb = controller->musb; /* ep0 doesn't use DMA; remember cppi indices are 0..N-1 */ index = ep->epnum - 1; @@ -339,7 +343,8 @@ static void cppi_channel_release(struct dma_channel *channel) c = container_of(channel, struct cppi_channel, channel); tibase = c->controller->tibase; if (!c->hw_ep) - dev_dbg(musb->controller, "releasing idle DMA channel %p\n", c); + dev_dbg(c->controller->musb->controller, + "releasing idle DMA channel %p\n", c); else if (!c->transmit) core_rxirq_enable(tibase, c->index + 1); @@ -357,10 +362,11 @@ cppi_dump_rx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "RX DMA%d%s: %d left, csr %04x, " - "%08x H%08x S%08x C%08x, " - "B%08x L%08x %08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "RX DMA%d%s: %d left, csr %04x, " + "%08x H%08x S%08x C%08x, " + "B%08x L%08x %08x .. %08x" + "\n", c->index, tag, musb_readl(c->controller->tibase, DAVINCI_RXCPPI_BUFCNT0_REG + 4 * c->index), @@ -387,10 +393,11 @@ cppi_dump_tx(int level, struct cppi_channel *c, const char *tag) musb_ep_select(base, c->index + 1); - DBG(level, "TX DMA%d%s: csr %04x, " - "H%08x S%08x C%08x %08x, " - "F%08x L%08x .. %08x" - "\n", + dev_dbg(c->controller->musb->controller, + "TX DMA%d%s: csr %04x, " + "H%08x S%08x C%08x %08x, " + "F%08x L%08x .. %08x" + "\n", c->index, tag, musb_readw(c->hw_ep->regs, MUSB_TXCSR), @@ -1022,6 +1029,7 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) int i; dma_addr_t safe2ack; void __iomem *regs = rx->hw_ep->regs; + struct musb *musb = cppi->musb; cppi_dump_rx(6, rx, "/K"); -- cgit v1.2.3-70-g09d2 From cf6808cb09e72fa7ee8713bf48219a2eb98da91b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 3 Aug 2011 21:41:26 -0700 Subject: usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.h Include dma-mapping.h to fix build of the renesas_usbhs driver | CC drivers/usb/renesas_usbhs/mod_gadget.o | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_map': | drivers/usb/renesas_usbhs/mod_gadget.c:190: error: implicit declaration of function 'dma_map_single' | drivers/usb/renesas_usbhs/mod_gadget.c:192: error: implicit declaration of function 'dma_sync_single_for_device' | drivers/usb/renesas_usbhs/mod_gadget.c:196: error: implicit declaration of function 'dma_mapping_error' | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_unmap': | drivers/usb/renesas_usbhs/mod_gadget.c:217: error: implicit declaration of function 'dma_unmap_single' | drivers/usb/renesas_usbhs/mod_gadget.c:219: error: implicit declaration of function 'dma_sync_single_for_cpu' | make[5]: *** [drivers/usb/renesas_usbhs/mod_gadget.o] Error 1 | make[4]: *** [drivers/usb/renesas_usbhs] Error 2 Reported-by: Magnus Damm Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index ba79dbf5adb..e7101dc31e4 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -14,6 +14,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA * */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 240a16e2cd831cb25361b1d1797bd04e8faf8b4f Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 5 Aug 2011 13:29:49 +0300 Subject: usb: musb: tusb6010: fix compilation earlier commits have broken compilation of tusb6010 glue layer, fix it. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 12 ++++++++---- drivers/usb/musb/musb_regs.h | 6 ++++-- drivers/usb/musb/tusb6010.c | 1 + drivers/usb/musb/tusb6010_omap.c | 1 + 4 files changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 668eeef601a..b3c065ab9db 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -172,7 +172,8 @@ enum musb_g_ep0_state { #endif /* TUSB mapping: "flat" plus ep0 special cases */ -#if defined(CONFIG_USB_MUSB_TUSB6010) +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define musb_ep_select(_mbase, _epnum) \ musb_writeb((_mbase), MUSB_INDEX, (_epnum)) #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET @@ -241,7 +242,8 @@ struct musb_hw_ep { void __iomem *fifo; void __iomem *regs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) void __iomem *conf; #endif @@ -258,7 +260,8 @@ struct musb_hw_ep { struct dma_channel *tx_channel; struct dma_channel *rx_channel; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB has "asynchronous" and "synchronous" dma modes */ dma_addr_t fifo_async; dma_addr_t fifo_sync; @@ -356,7 +359,8 @@ struct musb { void __iomem *ctrl_base; void __iomem *mregs; -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) dma_addr_t async; dma_addr_t sync; void __iomem *sync_va; diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 82410703dcd..03f2655af29 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -234,7 +234,8 @@ #define MUSB_TESTMODE 0x0F /* 8 bit */ /* Get offset for a given FIFO from musb->mregs */ -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) #define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20)) #else #define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4)) @@ -295,7 +296,8 @@ #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (0x100 + (0x10*(_epnum)) + (_offset)) -#ifdef CONFIG_USB_MUSB_TUSB6010 +#if defined(CONFIG_USB_MUSB_TUSB6010) || \ + defined(CONFIG_USB_MUSB_TUSB6010_MODULE) /* TUSB6010 EP0 configuration register is special */ #define MUSB_TUSB_OFFSET(_epnum, _offset) \ (0x10 + _offset) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9eec41fbf3a..ec1480191f7 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 07c8a73dfe4..b67b4bc596c 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -20,6 +20,7 @@ #include #include "musb_core.h" +#include "tusb6010.h" #define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data) -- cgit v1.2.3-70-g09d2 From ad50c1b20ff27780afbb8bcd3d153393d360419e Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 5 Aug 2011 17:33:05 +0800 Subject: usb: musb: blackfin: include prefetch head file After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/blackfin.c: In function 'musb_write_fifo': drivers/usb/musb/blackfin.c:43: error: implicit declaration of function 'prefetch' Signed-off-by: Bob Liu Signed-off-by: Felipe Balbi --- drivers/usb/musb/blackfin.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index ae8c3961774..5e7cfba5b07 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -17,6 +17,7 @@ #include #include #include +#include #include -- cgit v1.2.3-70-g09d2 From bb8070c29ca87ac0aa24e04a1207cc932f62258f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 5 Aug 2011 22:14:46 +0200 Subject: usb: gadget: f_phonet: unlock in error case Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_phonet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index 8f8d3f6cd89..8f3eab1af88 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -434,6 +434,7 @@ static int pn_set_alt(struct usb_function *f, unsigned intf, unsigned alt) config_ep_by_speed(gadget, f, fp->out_ep)) { fp->in_ep->desc = NULL; fp->out_ep->desc = NULL; + spin_unlock(&port->lock); return -EINVAL; } usb_ep_enable(fp->out_ep); -- cgit v1.2.3-70-g09d2 From 6193d6997c90535af8f8491fc0019f785a3322b0 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 10 Aug 2011 11:01:57 +0200 Subject: usb: musb: gadget: fix error path In case one "forgot" to load the receiver i.e. doing |modprobe omap2430 |modprobe musb_hdrc he ends up with: |musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) |HS USB OTG: no transceiver configured |musb-hdrc musb-hdrc: musb_init_controller failed with status -19 |(NULL device *): gadget not registered. |Unable to handle kernel NULL pointer dereference at virtual address 0000001c |Internal error: Oops: 17 [#1] SMP |[] (sysfs_find_dirent+0x4/0x60) from [] (sysfs_get_dirent+0x28/0x78) |[] (sysfs_get_dirent+0x28/0x78) from [] (sysfs_unmerge_group+0x1c/0x90) |[] (sysfs_unmerge_group+0x1c/0x90) from [] (dpm_sysfs_remove+0x14/0x3c) |[] (dpm_sysfs_remove+0x14/0x3c) from [] (device_del+0x40/0x1b4) |[] (device_del+0x40/0x1b4) from [] (device_unregister+0xc/0x18) |[] (device_unregister+0xc/0x18) from [] (musb_free+0x24/0x88 [musb_hdrc]) |[] (musb_free+0x24/0x88 [musb_hdrc]) from [] (musb_probe+0xb50/0xe3c [musb_hdrc]) |[] (musb_probe+0xb50/0xe3c [musb_hdrc]) from [] (platform_drv_probe+0x1c/0x24) The problem is that musb_free() tries to figure out what was initializued and what wasn't and clean up only the initialized part. This works well for usb_del_gadget_udc() but device_unregister() can't deal with it. Therefore we rely on the fact the we always have a parent device and only then remove the device. I broke this in 0f91349 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8c41a2e6ea7..e81820370d6 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1856,6 +1856,7 @@ int __init musb_gadget_setup(struct musb *musb) return 0; err: + musb->g.dev.parent = NULL; device_unregister(&musb->g.dev); return status; } @@ -1863,7 +1864,8 @@ err: void musb_gadget_cleanup(struct musb *musb) { usb_del_gadget_udc(&musb->g); - device_unregister(&musb->g.dev); + if (musb->g.dev.parent) + device_unregister(&musb->g.dev); } /* -- cgit v1.2.3-70-g09d2 From f8afdf481f0fef5e170c6c928cec42879d505654 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 12 Aug 2011 13:31:30 -0400 Subject: drivers/net/wireless/wl12xx: add missing kfree In each case, the freed data should be freed in the error handling code as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // Signed-off-by: Julia Lawall Acked-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/acx.c | 6 +----- drivers/net/wireless/wl12xx/testmode.c | 5 ++++- 2 files changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c index 7e33f1f4f3d..34f6ab53e51 100644 --- a/drivers/net/wireless/wl12xx/acx.c +++ b/drivers/net/wireless/wl12xx/acx.c @@ -77,8 +77,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth) auth->sleep_auth = sleep_auth; ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth)); - if (ret < 0) - return ret; out: kfree(auth); @@ -624,10 +622,8 @@ int wl1271_acx_cca_threshold(struct wl1271 *wl) ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD, detection, sizeof(*detection)); - if (ret < 0) { + if (ret < 0) wl1271_warning("failed to set cca threshold: %d", ret); - return ret; - } out: kfree(detection); diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c index 5d5e1ef8720..88add68bd9a 100644 --- a/drivers/net/wireless/wl12xx/testmode.c +++ b/drivers/net/wireless/wl12xx/testmode.c @@ -139,12 +139,15 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[]) if (ret < 0) { wl1271_warning("testmode cmd interrogate failed: %d", ret); + kfree(cmd); return ret; } skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd)); - if (!skb) + if (!skb) { + kfree(cmd); return -ENOMEM; + } NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd); -- cgit v1.2.3-70-g09d2 From 63d635b21c00069b5ade7640bcbe8ab912dc65d1 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 2 Jun 2011 04:29:23 +0000 Subject: ixgbe: Fix FCOE memory leak for DDP packets This patch is meant to fix a memory leak found via code review for FCOE. Specifically on DDP flows the SKBs were being dropped without being recycled, freed, or given to the stack. Signed-off-by: Alexander Duyck Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e86297b3273..22790394318 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1459,8 +1459,10 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb, staterr); - if (!ddp_bytes) + if (!ddp_bytes) { + dev_kfree_skb_any(skb); goto next_desc; + } } #endif /* IXGBE_FCOE */ ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc); -- cgit v1.2.3-70-g09d2 From 1d2101a712b3b7281a19ff6d7bfc16c2ce9d3998 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 22 Jul 2011 06:21:56 +0000 Subject: e1000e: Spurious interrupts & dropped packets with 82577/8/9 in half-duplex On 82577/8/9 in half-duplex when a received packet is passed from the PHY to the MAC, if too many preamble octects are stripped from the packet before arriving at the MAC, it can be misintrepeted as an in-band message rather than an actual frame. For example, if the frame contents resembled an interrupt request in-band message, it would trigger a false interrupt. In most cases, the packet is just dropped. By reducing the number of preamble octets stripped from the beginning of the frame when passing it from the PHY to the MAC, the MAC will interpret the frame properly. An additional uses of the magic PHY_REG(770, 16) have been updated with a define introduced with this patch. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ich8lan.c | 41 +++++++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 4e36978b8fd..7525e372720 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -163,6 +163,11 @@ #define HV_KMRN_MODE_CTRL PHY_REG(769, 16) #define HV_KMRN_MDIO_SLOW 0x0400 +/* KMRN FIFO Control and Status */ +#define HV_KMRN_FIFO_CTRLSTA PHY_REG(770, 16) +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK 0x7000 +#define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT 12 + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -657,6 +662,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; s32 ret_val; bool link; + u16 phy_reg; /* * We only want to go out to the PHY registers to see if Auto-Neg @@ -689,16 +695,35 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) mac->get_link_status = false; - if (hw->phy.type == e1000_phy_82578) { - ret_val = e1000_link_stall_workaround_hv(hw); - if (ret_val) - goto out; - } - - if (hw->mac.type == e1000_pch2lan) { + switch (hw->mac.type) { + case e1000_pch2lan: ret_val = e1000_k1_workaround_lv(hw); if (ret_val) goto out; + /* fall-thru */ + case e1000_pchlan: + if (hw->phy.type == e1000_phy_82578) { + ret_val = e1000_link_stall_workaround_hv(hw); + if (ret_val) + goto out; + } + + /* + * Workaround for PCHx parts in half-duplex: + * Set the number of preambles removed from the packet + * when it is passed from the PHY to the MAC to prevent + * the MAC from misinterpreting the packet type. + */ + e1e_rphy(hw, HV_KMRN_FIFO_CTRLSTA, &phy_reg); + phy_reg &= ~HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK; + + if ((er32(STATUS) & E1000_STATUS_FD) != E1000_STATUS_FD) + phy_reg |= (1 << HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT); + + e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, phy_reg); + break; + default: + break; } /* @@ -1355,7 +1380,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) return ret_val; /* Preamble tuning for SSC */ - ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204); + ret_val = e1e_wphy(hw, HV_KMRN_FIFO_CTRLSTA, 0xA204); if (ret_val) return ret_val; } -- cgit v1.2.3-70-g09d2 From 0ed013e28fe853244f4972cf18d8e2bd62eeb8fc Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 29 Jul 2011 05:52:56 +0000 Subject: e1000e: workaround for packet drop on 82579 at 100Mbps The MAC can drop short packets when the PHY detects noise on the line at 100Mbps due to a timing issue. Workaround the issue by increasing the PLL counter so the PHY properly recognizes the synchronization pattern from the MAC. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ich8lan.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 7525e372720..46a5277dc1d 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -137,8 +137,9 @@ #define HV_PM_CTRL PHY_REG(770, 17) /* PHY Low Power Idle Control */ -#define I82579_LPI_CTRL PHY_REG(772, 20) -#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL PHY_REG(772, 20) +#define I82579_LPI_CTRL_ENABLE_MASK 0x6000 +#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT 0x80 /* EMI Registers */ #define I82579_EMI_ADDR 0x10 @@ -1670,6 +1671,7 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) s32 ret_val = 0; u16 status_reg = 0; u32 mac_reg; + u16 phy_reg; if (hw->mac.type != e1000_pch2lan) goto out; @@ -1684,12 +1686,19 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) mac_reg = er32(FEXTNVM4); mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; - if (status_reg & HV_M_STATUS_SPEED_1000) + ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); + if (ret_val) + goto out; + + if (status_reg & HV_M_STATUS_SPEED_1000) { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; - else + phy_reg &= ~I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } else { mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; - + phy_reg |= I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT; + } ew32(FEXTNVM4, mac_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); } out: -- cgit v1.2.3-70-g09d2 From c6e7f51e73c1bc6044bce989ec503ef2e4758d55 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 29 Jul 2011 05:53:02 +0000 Subject: e1000e: workaround invalid Tx/Rx tail descriptor register write When the Manageability Engine (ME) is enabled on 82579, it periodically accesses some MAC CSR registers. There is an arbiter in hardware which prevents simultaneous access of these registers by the host software, i.e. the driver. There is a hardware bug in the aribter that signals a host access of the registers later than it actually happens. A write of the Transmit or Receive Descriptor Tail register could result in an incorrect value if the driver and ME perform simultaneous accesses which could result in an access to an invalid memory address. This would return an Unsupported Request which could hang the hardware. Workaround the issue by checking the FWSM register bit24 which is set by ME before it accesses the MAC CSR registers. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/e1000.h | 4 +++ drivers/net/e1000e/ich8lan.c | 5 +++ drivers/net/e1000e/netdev.c | 80 +++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 85 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 35916f48502..8533ad7f355 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -155,6 +155,9 @@ struct e1000_info; #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 +#define E1000_ICH_FWSM_PCIM2PCI 0x01000000 /* ME PCIm-to-PCI active */ +#define E1000_ICH_FWSM_PCIM2PCI_COUNT 2000 + /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 @@ -454,6 +457,7 @@ struct e1000_info { #define FLAG2_DISABLE_AIM (1 << 8) #define FLAG2_CHECK_PHY_HANG (1 << 9) #define FLAG2_NO_DISABLE_RX (1 << 10) +#define FLAG2_PCIM2PCI_ARBITER_WA (1 << 11) #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 46a5277dc1d..54add27c8f7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -814,6 +814,11 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) (adapter->hw.phy.type == e1000_phy_igp_3)) adapter->flags |= FLAG_LSC_GIG_SPEED_DROP; + /* Enable workaround for 82579 w/ ME enabled */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + adapter->flags2 |= FLAG2_PCIM2PCI_ARBITER_WA; + /* Disable EEE by default until IEEE802.3az spec is finalized */ if (adapter->flags2 & FLAG2_HAS_EEE) adapter->hw.dev_spec.ich8lan.eee_disable = true; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 362f70382cd..2198e615f24 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -518,6 +518,63 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, adapter->hw_csum_good++; } +/** + * e1000e_update_tail_wa - helper function for e1000e_update_[rt]dt_wa() + * @hw: pointer to the HW structure + * @tail: address of tail descriptor register + * @i: value to write to tail descriptor register + * + * When updating the tail register, the ME could be accessing Host CSR + * registers at the same time. Normally, this is handled in h/w by an + * arbiter but on some parts there is a bug that acknowledges Host accesses + * later than it should which could result in the descriptor register to + * have an incorrect value. Workaround this by checking the FWSM register + * which has bit 24 set while ME is accessing Host CSR registers, wait + * if it is set and try again a number of times. + **/ +static inline s32 e1000e_update_tail_wa(struct e1000_hw *hw, u8 __iomem * tail, + unsigned int i) +{ + unsigned int j = 0; + + while ((j++ < E1000_ICH_FWSM_PCIM2PCI_COUNT) && + (er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI)) + udelay(50); + + writel(i, tail); + + if ((j == E1000_ICH_FWSM_PCIM2PCI_COUNT) && (i != readl(tail))) + return E1000_ERR_SWFW_SYNC; + + return 0; +} + +static void e1000e_update_rdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->rx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + e_err("ME firmware caused invalid RDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + +static void e1000e_update_tdt_wa(struct e1000_adapter *adapter, unsigned int i) +{ + u8 __iomem *tail = (adapter->hw.hw_addr + adapter->tx_ring->tail); + struct e1000_hw *hw = &adapter->hw; + + if (e1000e_update_tail_wa(hw, tail, i)) { + u32 tctl = er32(TCTL); + ew32(TCTL, tctl & ~E1000_TCTL_EN); + e_err("ME firmware caused invalid TDT - resetting\n"); + schedule_work(&adapter->reset_task); + } +} + /** * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure @@ -573,7 +630,10 @@ map_skb: * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } i++; if (i == rx_ring->count) @@ -673,7 +733,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i << 1); + else + writel(i << 1, + adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -756,7 +820,10 @@ check_page: * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - writel(i, adapter->hw.hw_addr + rx_ring->tail); + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_rdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + rx_ring->tail); } } @@ -4689,7 +4756,12 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, wmb(); tx_ring->next_to_use = i; - writel(i, adapter->hw.hw_addr + tx_ring->tail); + + if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA) + e1000e_update_tdt_wa(adapter, i); + else + writel(i, adapter->hw.hw_addr + tx_ring->tail); + /* * we need this if more than one processor can write to our tail * at a time, it synchronizes IO on IA64/Altix systems -- cgit v1.2.3-70-g09d2 From 4eb60d869fdad7acd098b53bfd1863c311d8933d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 13 Aug 2011 09:02:43 -0700 Subject: Revert "iwlagn: sysfs couldn't find the priv pointer" This reverts commit cc1a93e68f6c0d736b771f0746e8e4186f483fdc. This fix introduced a bug: bad pointer in unload. Signed-off-by: Emmanuel Grumbach Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-pci.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c index 69d4ec467dc..fb7e436b40c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-pci.c +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c @@ -134,7 +134,6 @@ static void iwl_pci_apm_config(struct iwl_bus *bus) static void iwl_pci_set_drv_data(struct iwl_bus *bus, void *drv_data) { bus->drv_data = drv_data; - pci_set_drvdata(IWL_BUS_GET_PCI_DEV(bus), drv_data); } static void iwl_pci_get_hw_id(struct iwl_bus *bus, char buf[], @@ -455,6 +454,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); } + pci_set_drvdata(pdev, bus); + bus->dev = &pdev->dev; bus->irq = pdev->irq; bus->ops = &pci_ops; @@ -493,12 +494,11 @@ static void iwl_pci_down(struct iwl_bus *bus) static void __devexit iwl_pci_remove(struct pci_dev *pdev) { - struct iwl_priv *priv = pci_get_drvdata(pdev); - void *bus_specific = priv->bus->bus_specific; + struct iwl_bus *bus = pci_get_drvdata(pdev); - iwl_remove(priv); + iwl_remove(bus->drv_data); - iwl_pci_down(bus_specific); + iwl_pci_down(bus); } #ifdef CONFIG_PM @@ -506,20 +506,20 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) static int iwl_pci_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_priv *priv = pci_get_drvdata(pdev); + struct iwl_bus *bus = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if * WoWLAN is enabled - don't kill the NIC, someone may need it in Sx. */ - return iwl_suspend(priv); + return iwl_suspend(bus->drv_data); } static int iwl_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_priv *priv = pci_get_drvdata(pdev); + struct iwl_bus *bus = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if @@ -532,7 +532,7 @@ static int iwl_pci_resume(struct device *device) */ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - return iwl_resume(priv); + return iwl_resume(bus->drv_data); } static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume); -- cgit v1.2.3-70-g09d2 From 16a9d06c753abc44f66f88e03bbecb3f1e45d71b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 13 Aug 2011 09:02:44 -0700 Subject: iwlagn: sysfs couldn't find the priv pointer This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-pci.c | 39 +++++++++++++++------------------- 1 file changed, 17 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c index fb7e436b40c..2fdbffa079c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-pci.c +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c @@ -134,6 +134,7 @@ static void iwl_pci_apm_config(struct iwl_bus *bus) static void iwl_pci_set_drv_data(struct iwl_bus *bus, void *drv_data) { bus->drv_data = drv_data; + pci_set_drvdata(IWL_BUS_GET_PCI_DEV(bus), drv_data); } static void iwl_pci_get_hw_id(struct iwl_bus *bus, char buf[], @@ -454,8 +455,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); } - pci_set_drvdata(pdev, bus); - bus->dev = &pdev->dev; bus->irq = pdev->irq; bus->ops = &pci_ops; @@ -479,26 +478,22 @@ out_no_pci: return err; } -static void iwl_pci_down(struct iwl_bus *bus) -{ - struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific; - - pci_disable_msi(pci_bus->pci_dev); - pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base); - pci_release_regions(pci_bus->pci_dev); - pci_disable_device(pci_bus->pci_dev); - pci_set_drvdata(pci_bus->pci_dev, NULL); - - kfree(bus); -} - static void __devexit iwl_pci_remove(struct pci_dev *pdev) { - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); + struct iwl_bus *bus = priv->bus; + struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus); + struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus); - iwl_remove(bus->drv_data); + iwl_remove(priv); - iwl_pci_down(bus); + pci_disable_msi(pci_dev); + pci_iounmap(pci_dev, pci_bus->hw_base); + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); + pci_set_drvdata(pci_dev, NULL); + + kfree(bus); } #ifdef CONFIG_PM @@ -506,20 +501,20 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) static int iwl_pci_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if * WoWLAN is enabled - don't kill the NIC, someone may need it in Sx. */ - return iwl_suspend(bus->drv_data); + return iwl_suspend(priv); } static int iwl_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if @@ -532,7 +527,7 @@ static int iwl_pci_resume(struct device *device) */ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - return iwl_resume(bus->drv_data); + return iwl_resume(priv); } static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume); -- cgit v1.2.3-70-g09d2 From f6957f88e59df5008f7b2169400be657f81cdb80 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Sun, 7 Aug 2011 23:15:47 +0000 Subject: vmxnet3: Don't enable vlan filters in promiscuous mode. The vmxnet3 driver enables vlan filters if filtering is enabled for any vlan. In promiscuous mode the filter table is cleared to in order to disable filtering. However, if a vlan device is subsequently created that vlan will be added to the filter, re-engaging it. As a result, not only do we not see all the vlans in promiscuous mode, we don't even see vlans for which a filter was previously created. CC: Scott J. Goldman CC: Shreyas Bhatewara CC: VMware PV-Drivers Signed-off-by: Jesse Gross Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 1cbacb38965..0959583feb2 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1929,14 +1929,17 @@ static void vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } set_bit(vid, adapter->active_vlans); } @@ -1946,14 +1949,17 @@ static void vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); - u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; - unsigned long flags; - VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); - spin_lock_irqsave(&adapter->cmd_lock, flags); - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_VLAN_FILTERS); - spin_unlock_irqrestore(&adapter->cmd_lock, flags); + if (!(netdev->flags & IFF_PROMISC)) { + u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; + + VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); + VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, + VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + } clear_bit(vid, adapter->active_vlans); } -- cgit v1.2.3-70-g09d2 From 75bc8ef528f7c4ea7e80384c5593487b6b3b535e Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 8 Aug 2011 02:34:07 +0000 Subject: usbnet/cdc_ncm: Don't use stack variables for DMA The cdc_ncm driver still has a few places where stack variables are passed to the cdc_ncm_do_request function. This triggers a stack trace in lib/dma-debug.c if the CONFIG_DEBUG_DMA_API option is set. Adjust these calls to pass parameters that have been allocated with kzalloc. Signed-off-by: Josh Boyer Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 47 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 38 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index a03336e086d..f06fb78383a 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -228,23 +228,40 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { - struct usb_cdc_ncm_ndp_input_size ndp_in_sz; + struct usb_cdc_ncm_ndp_input_size *ndp_in_sz; + + ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL); + if (!ndp_in_sz) { + err = -ENOMEM; + goto size_err; + } + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &ndp_in_sz, 8, 1000); + 0, iface_no, ndp_in_sz, 8, 1000); + kfree(ndp_in_sz); } else { - __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + __le32 *dwNtbInMaxSize; + dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize), + GFP_KERNEL); + if (!dwNtbInMaxSize) { + err = -ENOMEM; + goto size_err; + } + *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), USB_CDC_SET_NTB_INPUT_SIZE, USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, - 0, iface_no, &dwNtbInMaxSize, 4, 1000); + 0, iface_no, dwNtbInMaxSize, 4, 1000); + kfree(dwNtbInMaxSize); } - +size_err: if (err < 0) pr_debug("Setting NTB Input Size failed\n"); } @@ -325,19 +342,29 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* set Max Datagram Size (MTU) */ if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { - __le16 max_datagram_size; + __le16 *max_datagram_size; u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); + + max_datagram_size = kzalloc(sizeof(*max_datagram_size), + GFP_KERNEL); + if (!max_datagram_size) { + err = -ENOMEM; + goto max_dgram_err; + } + err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0), USB_CDC_GET_MAX_DATAGRAM_SIZE, USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, - 0, iface_no, &max_datagram_size, + 0, iface_no, max_datagram_size, 2, 1000); if (err < 0) { pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", CDC_NCM_MIN_DATAGRAM_SIZE); + kfree(max_datagram_size); } else { - ctx->max_datagram_size = le16_to_cpu(max_datagram_size); + ctx->max_datagram_size = + le16_to_cpu(*max_datagram_size); /* Check Eth descriptor value */ if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) { if (ctx->max_datagram_size > eth_max_sz) @@ -360,8 +387,10 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE, 0, - iface_no, &max_datagram_size, + iface_no, max_datagram_size, 2, 1000); + kfree(max_datagram_size); +max_dgram_err: if (err < 0) pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); } -- cgit v1.2.3-70-g09d2 From 951f2f960e5bbce20309de44626cf11d17847712 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 8 Aug 2011 06:28:50 +0000 Subject: drivers/net/can/sja1000/plx_pci.c: eliminate double free In this code, the failure_cleanup label calls the function plx_pci_del_card, which frees everything in the card->net_dev array. dev is placed in this array immediately after allocation, so the two subsequent jumps to failure_cleanup should not also call free_sja1000dev, but the second one does. If plx_pci_check_sja1000 fails, then free_sja1000dev is also called on dev. Because dev is already in the card->net_dev array, this implies that when plx_pci_del_card is later called, it may get freed again. So that entry is reset to NULL after the free. Finally, if there is a problem with one channel, there will be a hole in the array. card->channels counts the number of channels that have succeeded, and does not keep track of the index of the largest element in the array that is valid. So the loop in plx_pci_del_card is changed to go up to PLX_PCI_MAX_CHAN, which is only 2. Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/can/sja1000/plx_pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 231385b8e08..c7f3d4ea116 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -408,7 +408,7 @@ static void plx_pci_del_card(struct pci_dev *pdev) struct sja1000_priv *priv; int i = 0; - for (i = 0; i < card->channels; i++) { + for (i = 0; i < PLX_PCI_MAX_CHAN; i++) { dev = card->net_dev[i]; if (!dev) continue; @@ -536,7 +536,6 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, if (err) { dev_err(&pdev->dev, "Registering device failed " "(err=%d)\n", err); - free_sja1000dev(dev); goto failure_cleanup; } @@ -549,6 +548,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev, dev_err(&pdev->dev, "Channel #%d not detected\n", i + 1); free_sja1000dev(dev); + card->net_dev[i] = NULL; } } -- cgit v1.2.3-70-g09d2 From 6a27cdeddf48858089e3672f844615cbf0877ebf Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 9 Aug 2011 20:15:50 +0000 Subject: net: sh_eth: Fix build by forgot including linux/interrupt.h By a6b7a407865aab9f849dd99a71072b7cd1175116, remove interrupt.h from netdevice.h. But this forget to revise sh_eth. This fix the build failure. error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_eth_interrupt' error: implicit declaration of function 'request_irq' error: 'sh_eth_interrupt' undeclared (first use in this function) error: (Each undeclared identifier is reported only once drivers/net/sh_eth.c:1386: error: for each function it appears in.) error: 'IRQF_SHARED' undeclared (first use in this function) error: implicit declaration of function 'free_irq' Signed-off-by: Nobuhiro Iwamatsu CC: Alexey Dobriyan Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index ad35c210b83..190f619e421 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -21,6 +21,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 32f7fd44ce3aae9ad204fb167d793c335608568d Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 10 Aug 2011 01:19:48 +0000 Subject: gianfar: prevent buggy hw rx vlan tagging On some buggy chips, "vlan tag present" flag is set which causes packet loss. Fix this by checking if rx vlan accel is enabled in features. Reported-by: Michael Guntsche Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 2659daad783..31d5c574e5a 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -2710,8 +2710,13 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, /* Tell the skb what kind of packet this is */ skb->protocol = eth_type_trans(skb, dev); - /* Set vlan tag */ - if (fcb->flags & RXFCB_VLN) + /* + * There's need to check for NETIF_F_HW_VLAN_RX here. + * Even if vlan rx accel is disabled, on some chips + * RXFCB_VLN is pseudo randomly set. + */ + if (dev->features & NETIF_F_HW_VLAN_RX && + fcb->flags & RXFCB_VLN) __vlan_hwaccel_put_tag(skb, fcb->vlctl); /* Send the packet up the stack */ -- cgit v1.2.3-70-g09d2 From 588dc91151d99e9307c2f9a8468453274fe43ecd Mon Sep 17 00:00:00 2001 From: Wang Shaoyan Date: Thu, 11 Aug 2011 17:07:25 +0000 Subject: gianfar: reduce stack usage in gianfar_ethtool.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/gianfar_ethtool.c:765: warning: the frame size of 2048 bytes is larger than 1024 bytes Signed-off-by: Wang Shaoyan Reviewed-and-tested-by: Sebastian Pöhn Signed-off-by: David S. Miller --- drivers/net/gianfar_ethtool.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 6e350692d11..25a8c2adb00 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -686,10 +686,21 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u { unsigned int last_rule_idx = priv->cur_filer_idx; unsigned int cmp_rqfpr; - unsigned int local_rqfpr[MAX_FILER_IDX + 1]; - unsigned int local_rqfcr[MAX_FILER_IDX + 1]; + unsigned int *local_rqfpr; + unsigned int *local_rqfcr; int i = 0x0, k = 0x0; int j = MAX_FILER_IDX, l = 0x0; + int ret = 1; + + local_rqfpr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + local_rqfcr = kmalloc(sizeof(unsigned int) * (MAX_FILER_IDX + 1), + GFP_KERNEL); + if (!local_rqfpr || !local_rqfcr) { + pr_err("Out of memory\n"); + ret = 0; + goto err; + } switch (class) { case TCP_V4_FLOW: @@ -706,7 +717,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u break; default: pr_err("Right now this class is not supported\n"); - return 0; + ret = 0; + goto err; } for (i = 0; i < MAX_FILER_IDX + 1; i++) { @@ -721,7 +733,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u if (i == MAX_FILER_IDX + 1) { pr_err("No parse rule found, can't create hash rules\n"); - return 0; + ret = 0; + goto err; } /* If a match was found, then it begins the starting of a cluster rule @@ -765,7 +778,10 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u priv->cur_filer_idx = priv->cur_filer_idx - 1; } - return 1; +err: + kfree(local_rqfcr); + kfree(local_rqfpr); + return ret; } static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd) -- cgit v1.2.3-70-g09d2 From 8a9af4fdf6d5eeb3200a088354d266a87e8260b0 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 9 Aug 2011 16:31:54 -0700 Subject: USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. usb_ifnum_to_if() can return NULL if the USB device does not have a configuration installed (usb_device->actconfig == NULL), or if we can't find the interface number in the installed configuration. Return an error instead of crashing. Signed-off-by: Sarah Sharp --- drivers/usb/core/hcd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 8669ba3fe79..73cbbd85219 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1775,6 +1775,8 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, struct usb_interface *iface = usb_ifnum_to_if(udev, cur_alt->desc.bInterfaceNumber); + if (!iface) + return -EINVAL; if (iface->resetting_device) { /* * The USB core just reset the device, so the xHCI host -- cgit v1.2.3-70-g09d2 From 18adad1c57f820d38d05e3d5e3d548e286233b76 Mon Sep 17 00:00:00 2001 From: Gerard Braad Date: Tue, 16 Aug 2011 00:17:56 -0700 Subject: Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K) Signed-off-by: Gerard Braad Reviewed-by: Chris Bagwell Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 03ebcc8b24b..c1c2f7b28d8 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1460,6 +1460,9 @@ static const struct wacom_features wacom_features_0xD3 = static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xD5 = + { "Wacom Bamboo Pen 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, + 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1564,6 +1567,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xD4) }, + { USB_DEVICE_WACOM(0xD5) }, { USB_DEVICE_WACOM(0xD6) }, { USB_DEVICE_WACOM(0xD7) }, { USB_DEVICE_WACOM(0xD8) }, -- cgit v1.2.3-70-g09d2 From a417ea4432db7fd1c91c19b129a3e3d2367b7ce4 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 16 Aug 2011 00:17:56 -0700 Subject: Input: wacom - add WAC_MSG_RETRIES define Use WAC_MSG_RETRIES define instead of a numeric constant. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 449c0a46dba..9879c73ee51 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -49,6 +49,7 @@ struct hid_descriptor { #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 #define WAC_HID_FEATURE_REPORT 0x03 +#define WAC_MSG_RETRIES 5 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -165,7 +166,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi report, hid_desc->wDescriptorLength, 5000); /* 5 secs */ - } while (result < 0 && limit++ < 5); + } while (result < 0 && limit++ < WAC_MSG_RETRIES); /* No need to parse the Descriptor. It isn't an error though */ if (result < 0) @@ -336,7 +337,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat error = usb_get_report(intf, WAC_HID_FEATURE_REPORT, report_id, rep_data, 3); - } while ((error < 0 || rep_data[1] != 4) && limit++ < 5); + } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); } else if (features->type != TABLETPC) { do { rep_data[0] = 2; @@ -347,7 +348,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat error = usb_get_report(intf, WAC_HID_FEATURE_REPORT, report_id, rep_data, 2); - } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES); } kfree(rep_data); -- cgit v1.2.3-70-g09d2 From 3b48c91cdf2d6827ce315b3b112310fa02198db0 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Tue, 16 Aug 2011 00:17:57 -0700 Subject: Input: wacom - report id 3 returns 4 bytes of data Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 9879c73ee51..d27c9d91630 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -320,23 +320,25 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat int limit = 0, report_id = 2; int error = -ENOMEM; - rep_data = kmalloc(2, GFP_KERNEL); + rep_data = kmalloc(4, GFP_KERNEL); if (!rep_data) return error; - /* ask to report tablet data if it is 2FGT Tablet PC or + /* ask to report tablet data if it is MT Tablet PC or * not a Tablet PC */ if (features->type == TABLETPC2FG) { do { rep_data[0] = 3; rep_data[1] = 4; + rep_data[2] = 0; + rep_data[3] = 0; report_id = 3; error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - report_id, rep_data, 2); + report_id, rep_data, 4); if (error >= 0) error = usb_get_report(intf, WAC_HID_FEATURE_REPORT, report_id, - rep_data, 3); + rep_data, 4); } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); } else if (features->type != TABLETPC) { do { -- cgit v1.2.3-70-g09d2 From 48df4a6fd8c40c0bbcbca2044f5f2bc75dcf6db1 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 12 Aug 2011 10:23:01 -0700 Subject: xhci: Handle zero-length isochronous packets. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For a long time, the xHCI driver has had this note: /* FIXME: Ignoring zero-length packets, can those happen? */ It turns out that, yes, there are drivers that need to queue zero-length transfers for isochronous OUT transfers. Without this patch, users will see kernel hang messages when a driver attempts to enqueue an isochronous URB with a zero length transfer (because count_isoc_trbs_needed will return zero for that TD, xhci_td->last_trb will never be set, and updating the dequeue pointer will cause an infinite loop). Matěj ran into this issue when using an NI Audio4DJ USB soundcard with the snd-usb-caiaq driver. See https://bugzilla.kernel.org/show_bug.cgi?id=40702 Fix count_isoc_trbs_needed() to return 1 for zero-length transfers (thanks Alan on the math help). Update the various TRB field calculations to deal with zero-length transfers. We're still transferring one packet with a zero-length data payload, so the total_packet_count should be 1. The Transfer Burst Count (TBC) and Transfer Last Burst Packet Count (TLBPC) fields should be set to zero. This patch should be backported to kernels as old as 2.6.36. Signed-off-by: Sarah Sharp Tested-by: Matěj Laitl Cc: Daniel Mack Cc: Alan Stern Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b2d654b7477..54139a2f06c 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2684,6 +2684,10 @@ static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len, { int packets_transferred; + /* One TRB with a zero-length data packet. */ + if (running_total == 0 && trb_buff_len == 0) + return 0; + /* All the TRB queueing functions don't count the current TRB in * running_total. */ @@ -3125,20 +3129,15 @@ static int count_isoc_trbs_needed(struct xhci_hcd *xhci, struct urb *urb, int i) { int num_trbs = 0; - u64 addr, td_len, running_total; + u64 addr, td_len; addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); td_len = urb->iso_frame_desc[i].length; - running_total = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1)); - running_total &= TRB_MAX_BUFF_SIZE - 1; - if (running_total != 0) - num_trbs++; - - while (running_total < td_len) { + num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)), + TRB_MAX_BUFF_SIZE); + if (num_trbs == 0) num_trbs++; - running_total += TRB_MAX_BUFF_SIZE; - } return num_trbs; } @@ -3250,9 +3249,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, addr = start_addr + urb->iso_frame_desc[i].offset; td_len = urb->iso_frame_desc[i].length; td_remain_len = td_len; - /* FIXME: Ignoring zero-length packets, can those happen? */ total_packet_count = roundup(td_len, le16_to_cpu(urb->ep->desc.wMaxPacketSize)); + /* A zero-length transfer still involves at least one packet. */ + if (total_packet_count == 0) + total_packet_count++; burst_count = xhci_get_burst_count(xhci, urb->dev, urb, total_packet_count); residue = xhci_get_last_burst_packet_count(xhci, -- cgit v1.2.3-70-g09d2 From eb39d34004888afcc0a44d9c36383cd69fa3b3b9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 26 Jul 2011 16:59:00 -0700 Subject: target: Change TCM_NON_EXISTENT_LUN response to ASC=LOGICAL UNIT NOT SUPPORTED This patch changes transport_send_check_condition_and_sense() for TCM_NON_EXISTENT_LUN emulation to use 0x25 (LOGICAL UNIT NOT SUPPORTED) instead of the original 0x20 (INVALID COMMAND OPERATION CODE). This is helpful to distinguish between TCM_UNSUPPORTED_SCSI_OPCODE ASC=0x20 exceptions. Signed-off-by: Nicholas A. Bellinger --- drivers/target/target_core_transport.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 89760329d5d..cc5a339d4d5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4726,6 +4726,13 @@ int transport_send_check_condition_and_sense( */ switch (reason) { case TCM_NON_EXISTENT_LUN: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; + /* LOGICAL UNIT NOT SUPPORTED */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x25; + break; case TCM_UNSUPPORTED_SCSI_OPCODE: case TCM_SECTOR_COUNT_TOO_MANY: /* CURRENT ERROR */ -- cgit v1.2.3-70-g09d2 From c331eb580a0a7906c0cdb8dbae3cfe99e3c0e555 Mon Sep 17 00:00:00 2001 From: Andrew Drake Date: Tue, 16 Aug 2011 11:07:39 -0700 Subject: Input: bcm5974 - Add support for newer MacBookPro8,2 New MacBook Pro devices reporting product name MacBookPro8,2 come with newer/higher resolution touchpads than others with the same product name with USB ID 05ac:0252. This patch adds support for these devices. Signed-off-by: Andrew Drake Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 48d9ec13d32..da280189ef0 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -71,6 +71,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d #define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e +/* Macbook8,2 (unibody) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253 +#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254 #define BCM5974_DEVICE(prod) { \ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ @@ -112,6 +116,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_JIS), + /* MacbookPro8,2 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS), /* Terminating entry */ {} }; @@ -314,6 +322,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } + }, {} }; -- cgit v1.2.3-70-g09d2 From 28ac293363368650963ee4c1e323c1ff502c121f Mon Sep 17 00:00:00 2001 From: Yufeng Shen Date: Tue, 16 Aug 2011 00:40:54 -0700 Subject: Input: atmel_mxt_ts - report pressure information from the driver Atmel mxt1386 touch controller has the touch pressure information so let's report it to the user space. [dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.] Signed-off-by: Yufeng Shen Acked-by: Wanlong Gao Acked-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/atmel_mxt_ts.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index ae00604a6a8..f5d66859f23 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -244,6 +244,7 @@ struct mxt_finger { int x; int y; int area; + int pressure; }; /* Each client has this additional data */ @@ -536,6 +537,8 @@ static void mxt_input_report(struct mxt_data *data, int single_id) finger[id].x); input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[id].y); + input_report_abs(input_dev, ABS_MT_PRESSURE, + finger[id].pressure); } else { finger[id].status = 0; } @@ -546,6 +549,8 @@ static void mxt_input_report(struct mxt_data *data, int single_id) if (status != MXT_RELEASE) { input_report_abs(input_dev, ABS_X, finger[single_id].x); input_report_abs(input_dev, ABS_Y, finger[single_id].y); + input_report_abs(input_dev, + ABS_PRESSURE, finger[single_id].pressure); } input_sync(input_dev); @@ -560,6 +565,7 @@ static void mxt_input_touchevent(struct mxt_data *data, int x; int y; int area; + int pressure; /* Check the touch is present on the screen */ if (!(status & MXT_DETECT)) { @@ -584,6 +590,7 @@ static void mxt_input_touchevent(struct mxt_data *data, y = y >> 2; area = message->message[4]; + pressure = message->message[5]; dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id, status & MXT_MOVE ? "moved" : "pressed", @@ -594,6 +601,7 @@ static void mxt_input_touchevent(struct mxt_data *data, finger[id].x = x; finger[id].y = y; finger[id].area = area; + finger[id].pressure = pressure; mxt_input_report(data, id); } @@ -1116,6 +1124,8 @@ static int __devinit mxt_probe(struct i2c_client *client, 0, data->max_x, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, 255, 0, 0); /* For multi touch */ input_mt_init_slots(input_dev, MXT_MAX_FINGER); @@ -1125,6 +1135,8 @@ static int __devinit mxt_probe(struct i2c_client *client, 0, data->max_x, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, data->max_y, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); input_set_drvdata(input_dev, data); i2c_set_clientdata(client, data); -- cgit v1.2.3-70-g09d2 From ba3211ccd043fae3713793334d64d75bd0a1d029 Mon Sep 17 00:00:00 2001 From: "Peter Pan(潘卫平)" Date: Mon, 15 Aug 2011 15:57:35 +0000 Subject: bonding:reset backup and inactive flag of slave Eduard Sinelnikov (eduard.sinelnikov@gmail.com) found that if we change bonding mode from active backup to round robin, some slaves are still keeping "backup", and won't transmit packets. As Jay Vosburgh(fubar@us.ibm.com) pointed out that we can work around that by removing the bond_is_active_slave() check, because the "backup" flag is only meaningful for active backup mode. But if we just simply ignore the bond_is_active_slave() check, the transmission will work fine, but we can't maintain the correct value of "backup" flag for each slaves, though it is meaningless for other mode than active backup. I'd like to reset "backup" and "inactive" flag in bond_open, thus we can keep the correct value of them. As for bond_is_active_slave(), I'd like to prepare another patch to handle it. V2: Use C style comment. Move read_lock(&bond->curr_slave_lock). Replace restore with reset, for active backup mode, it means "restore", but for other modes, it means "reset". Signed-off-by: Weiping Pan Reviewed-by: WANG Cong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 38a83acd502..43f2ea54108 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3419,9 +3419,27 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); + struct slave *slave; + int i; bond->kill_timers = 0; + /* reset slave->backup and slave->inactive */ + read_lock(&bond->lock); + if (bond->slave_cnt > 0) { + read_lock(&bond->curr_slave_lock); + bond_for_each_slave(bond, slave, i) { + if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) + && (slave != bond->curr_active_slave)) { + bond_set_slave_inactive_flags(slave); + } else { + bond_set_slave_active_flags(slave); + } + } + read_unlock(&bond->curr_slave_lock); + } + read_unlock(&bond->lock); + INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); if (bond_is_lb(bond)) { -- cgit v1.2.3-70-g09d2 From 9a75a97296c43c34add7dca8275496186e1b4ae9 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Mon, 15 Aug 2011 22:33:34 +0000 Subject: via-velocity: remove non-tagged packet filtering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's undesired to filter untagged packets at any time. So simply remove this. Reported-by: Stephan Bärwolf Tested-by: Stephan Bärwolf Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index deb1eca13c9..7c5336c5c37 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -515,10 +515,6 @@ static void velocity_init_cam_filter(struct velocity_info *vptr) mac_set_cam_mask(regs, vptr->mCAMmask); /* Enable VCAMs */ - - if (test_bit(0, vptr->active_vlans)) - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { mac_set_vlan_cam(regs, i, (u8 *) &vid); vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); -- cgit v1.2.3-70-g09d2 From 9331db4f00cfee8a79d2147ac83723ef436b9759 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 17 Aug 2011 23:50:37 -0700 Subject: forcedeth: call vlan_mode only if hw supports vlans If hw does not support vlans, dont call nv_vlan_mode because it has no point. I believe that this should fix issues on older non-vlan supportive chips (like Ingo has). Reported-ty: Ingo Molnar Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index e55df308a3a..6d5fbd4d425 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5615,7 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i goto out_error; } - nv_vlan_mode(dev, dev->features); + if (id->driver_data & DEV_HAS_VLAN) + nv_vlan_mode(dev, dev->features); netif_carrier_off(dev); -- cgit v1.2.3-70-g09d2 From d555ab6bb321814853ca8a8d4e8e22d52e18a871 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Jul 2011 21:11:43 -0700 Subject: max8998_charger: Needs module.h power/max8998_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Randy Dunlap Signed-off-by: Anton Vorontsov --- drivers/power/max8998_charger.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c index cc21fa2120b..ef8efadb58c 100644 --- a/drivers/power/max8998_charger.c +++ b/drivers/power/max8998_charger.c @@ -20,6 +20,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 71aa79a8c2537eb07cd26b5e4dc43274a9c10692 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 1 Aug 2011 07:29:31 +0800 Subject: max8997_charger: Needs module.h power/max8997_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Axel Lin Acked-by: MyungJoo Ham Signed-off-by: Anton Vorontsov --- drivers/power/max8997_charger.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c index 7106b49b26e..ffc5033ea9c 100644 --- a/drivers/power/max8997_charger.c +++ b/drivers/power/max8997_charger.c @@ -20,6 +20,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 815efa1eab5b0c3e071e5d6df0cc2d7e0c7e6fd7 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Fri, 12 Aug 2011 17:55:18 +0300 Subject: s3c-adc-battery: Fix compilation error due to missing header (module.h) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add linux/module.h to fix this compilation error: drivers/power/s3c_adc_battery.c:435:15: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:435:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:435:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’ drivers/power/s3c_adc_battery.c:435:15: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:436:20: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:436:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:436:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_DESCRIPTION’ drivers/power/s3c_adc_battery.c:436:20: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:437:16: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:437:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:437:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_LICENSE’ drivers/power/s3c_adc_battery.c:437:16: warning: function declaration isn’t a prototype make[2]: *** [drivers/power/s3c_adc_battery.o] Error 1 Signed-off-by: Vasily Khoruzhick Signed-off-by: Ian Lartey Signed-off-by: Anton Vorontsov --- drivers/power/s3c_adc_battery.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c index a675e31b4f1..d32d0d70f9b 100644 --- a/drivers/power/s3c_adc_battery.c +++ b/drivers/power/s3c_adc_battery.c @@ -20,6 +20,7 @@ #include #include #include +#include #include -- cgit v1.2.3-70-g09d2 From d70d43d7d719ab709af7df109e706e804fe21834 Mon Sep 17 00:00:00 2001 From: Jiejing Zhang Date: Sat, 20 Aug 2011 14:38:01 -0700 Subject: Input: max11801_ts - correct license statement The original license statement was confusing since it was unclear if the license was pure GPLv2 or GPLv2+ and did not match the license of the driver max11801_ts was derived from. The license is GPLv2+. Signed-off-by: Jiejing Zhang Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/max11801_ts.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index 4f2713d9279..4627fe55b40 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -9,7 +9,8 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. */ /* -- cgit v1.2.3-70-g09d2 From 2782a35132339574b06ce30556eb9f97eb1d26cd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 21 Aug 2011 12:48:04 -0700 Subject: Input: tnetv107x-ts - add missing include of linux/module.h tnetv107x-ts.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tnetv107x-ts.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index 089b0a0f3d8..0e8f63e5b36 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -13,6 +13,7 @@ * GNU General Public License for more details. */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From b9cc510b395543cb7dba89c76421d23ed9e85f95 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 21 Aug 2011 12:48:08 -0700 Subject: Input: ep93xx_keypad - add missing include of linux/module.h ep93xx_keypad.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/ep93xx_keypad.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index c8242dd190d..aa17e024d80 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -20,6 +20,7 @@ * flag. */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From ffb57c4b8612c31204b06713770f6df4b8a94e4f Mon Sep 17 00:00:00 2001 From: Jay Estabrook Date: Wed, 6 Jul 2011 23:57:13 +0000 Subject: drm/radeon/alpha: Add Alpha support to Radeon DRM code Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 60125ddba1e..9b86fb0e412 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -450,6 +450,29 @@ static int radeon_ttm_io_mem_reserve(struct ttm_bo_device *bdev, struct ttm_mem_ return -EINVAL; mem->bus.base = rdev->mc.aper_base; mem->bus.is_iomem = true; +#ifdef __alpha__ + /* + * Alpha: use bus.addr to hold the ioremap() return, + * so we can modify bus.base below. + */ + if (mem->placement & TTM_PL_FLAG_WC) + mem->bus.addr = + ioremap_wc(mem->bus.base + mem->bus.offset, + mem->bus.size); + else + mem->bus.addr = + ioremap_nocache(mem->bus.base + mem->bus.offset, + mem->bus.size); + + /* + * Alpha: Use just the bus offset plus + * the hose/domain memory base for bus.base. + * It then can be used to build PTEs for VRAM + * access, as done in ttm_bo_vm_fault(). + */ + mem->bus.base = (mem->bus.base & 0x0ffffffffUL) + + rdev->ddev->hose->dense_mem_base; +#endif break; default: return -EINVAL; -- cgit v1.2.3-70-g09d2 From 24cae9e7c9537fd6a16bc2f5ec398ee4bef5d007 Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Fri, 19 Aug 2011 15:24:16 +0000 Subject: drm/radeon: Take IH ring into account for test size calculation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_test.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index dee4a0c1b4b..1ebd0fe9c13 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -40,10 +40,14 @@ void radeon_test_moves(struct radeon_device *rdev) size = 1024 * 1024; /* Number of tests = - * (Total GTT - IB pool - writeback page - ring buffer) / test size + * (Total GTT - IB pool - writeback page - ring buffers) / test size */ - n = ((u32)(rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - - rdev->cp.ring_size)) / size; + n = rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - rdev->cp.ring_size; + if (rdev->wb.wb_obj) + n -= RADEON_GPU_PAGE_SIZE; + if (rdev->ih.ring_obj) + n -= rdev->ih.ring_size; + n /= size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); if (!gtt_obj) { -- cgit v1.2.3-70-g09d2 From 4fb1a35c0185f8fa3e71b12de62b8752a9a9ed0f Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Fri, 19 Aug 2011 15:24:17 +0000 Subject: drm/radeon: Explicitly print GTT/VRAM offsets on test failure. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_test.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 1ebd0fe9c13..602fa3541c4 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -136,9 +136,15 @@ void radeon_test_moves(struct radeon_device *rdev) gtt_start++, vram_start++) { if (*vram_start != gtt_start) { DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, " - "expected 0x%p (GTT map 0x%p-0x%p)\n", - i, *vram_start, gtt_start, gtt_map, - gtt_end); + "expected 0x%p (GTT/VRAM offset " + "0x%16llx/0x%16llx)\n", + i, *vram_start, gtt_start, + (unsigned long long) + (gtt_addr - rdev->mc.gtt_start + + (void*)gtt_start - gtt_map), + (unsigned long long) + (vram_addr - rdev->mc.vram_start + + (void*)gtt_start - gtt_map)); radeon_bo_kunmap(vram_obj); goto out_cleanup; } @@ -179,9 +185,15 @@ void radeon_test_moves(struct radeon_device *rdev) gtt_start++, vram_start++) { if (*gtt_start != vram_start) { DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, " - "expected 0x%p (VRAM map 0x%p-0x%p)\n", - i, *gtt_start, vram_start, vram_map, - vram_end); + "expected 0x%p (VRAM/GTT offset " + "0x%16llx/0x%16llx)\n", + i, *gtt_start, vram_start, + (unsigned long long) + (vram_addr - rdev->mc.vram_start + + (void*)vram_start - vram_map), + (unsigned long long) + (gtt_addr - rdev->mc.gtt_start + + (void*)vram_start - vram_map)); radeon_bo_kunmap(gtt_obj[i]); goto out_cleanup; } -- cgit v1.2.3-70-g09d2 From ba95c45a78d57ac05bf45d81b92a6ec4d299695d Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Fri, 19 Aug 2011 15:24:18 +0000 Subject: drm/radeon: Make vramlimit parameter actually work. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index a3b011b4946..b51e15725c6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -301,6 +301,8 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 mc->mc_vram_size = mc->aper_size; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; + if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size) + mc->real_vram_size = radeon_vram_limit; dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n", mc->mc_vram_size >> 20, mc->vram_start, mc->vram_end, mc->real_vram_size >> 20); -- cgit v1.2.3-70-g09d2 From 5b9063b19caaffe7135e1f9b8b22174ded0f586b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 21 Aug 2011 21:04:12 -0700 Subject: Input: ad714xx-spi - force SPI bus into the default 8-bit mode Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x-spi.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index 4120dd54930..da83ac9bed7 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -54,6 +54,12 @@ static int ad714x_spi_write(struct device *dev, unsigned short reg, static int __devinit ad714x_spi_probe(struct spi_device *spi) { struct ad714x_chip *chip; + int err; + + spi->bits_per_word = 8; + err = spi_setup(spi); + if (err < 0) + return err; chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq, ad714x_spi_read, ad714x_spi_write); -- cgit v1.2.3-70-g09d2 From 6337de2204be3b7b40825a1d30de30e514e8947b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 21 Aug 2011 21:04:12 -0700 Subject: Input: ad714x - fix endianness issues Allow driver to be used on Big Endian boxes. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x-i2c.c | 34 ++++++++++------------------------ drivers/input/misc/ad714x-spi.c | 24 +++++++++++++++--------- 2 files changed, 25 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index e21deb1baa8..00a6a223212 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -32,17 +32,12 @@ static int ad714x_i2c_write(struct device *dev, unsigned short reg, { struct i2c_client *client = to_i2c_client(dev); int ret = 0; - u8 *_reg = (u8 *)® - u8 *_data = (u8 *)&data; - - u8 tx[4] = { - _reg[1], - _reg[0], - _data[1], - _data[0] + unsigned short tx[2] = { + cpu_to_be16(reg), + cpu_to_be16(data) }; - ret = i2c_master_send(client, tx, 4); + ret = i2c_master_send(client, (u8 *)tx, 4); if (ret < 0) dev_err(&client->dev, "I2C write error\n"); @@ -54,25 +49,16 @@ static int ad714x_i2c_read(struct device *dev, unsigned short reg, { struct i2c_client *client = to_i2c_client(dev); int ret = 0; - u8 *_reg = (u8 *)® - u8 *_data = (u8 *)data; + unsigned short tx = cpu_to_be16(reg); - u8 tx[2] = { - _reg[1], - _reg[0] - }; - u8 rx[2]; - - ret = i2c_master_send(client, tx, 2); + ret = i2c_master_send(client, (u8 *)&tx, 2); if (ret >= 0) - ret = i2c_master_recv(client, rx, 2); + ret = i2c_master_recv(client, (u8 *)data, 2); - if (unlikely(ret < 0)) { + if (unlikely(ret < 0)) dev_err(&client->dev, "I2C read error\n"); - } else { - _data[0] = rx[1]; - _data[1] = rx[0]; - } + else + *data = be16_to_cpu(*data); return ret; } diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index da83ac9bed7..0c7f9488f5c 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -#include /* BUS_I2C */ +#include /* BUS_SPI */ #include #include #include @@ -30,22 +30,28 @@ static int ad714x_spi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); -static int ad714x_spi_read(struct device *dev, unsigned short reg, - unsigned short *data) +static int ad714x_spi_read(struct device *dev, + unsigned short reg, unsigned short *data) { struct spi_device *spi = to_spi_device(dev); - unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg; + unsigned short tx = cpu_to_be16(AD714x_SPI_CMD_PREFIX | + AD714x_SPI_READ | reg); + int ret; - return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2); + ret = spi_write_then_read(spi, &tx, 2, data, 2); + + *data = be16_to_cpup(data); + + return ret; } -static int ad714x_spi_write(struct device *dev, unsigned short reg, - unsigned short data) +static int ad714x_spi_write(struct device *dev, + unsigned short reg, unsigned short data) { struct spi_device *spi = to_spi_device(dev); unsigned short tx[2] = { - AD714x_SPI_CMD_PREFIX | reg, - data + cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg), + cpu_to_be16(data) }; return spi_write(spi, (u8 *)tx, 4); -- cgit v1.2.3-70-g09d2 From c0409feb86893f5ccf73964c7b2b47ca64bdb014 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 22 Aug 2011 09:45:39 -0700 Subject: Input: ad714x - use DMA-safe buffers for spi_write() spi_write() requires use of DMA-safe (cacheline aligned) buffers. Also use the same buffers when reading data since to avoid extra locking and potential memory allocation in spi_write_then_read(). Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x-i2c.c | 60 ++++++++++++++------------- drivers/input/misc/ad714x-spi.c | 51 ++++++++++++++++------- drivers/input/misc/ad714x.c | 90 ++++++++++++++--------------------------- drivers/input/misc/ad714x.h | 33 ++++++++++++++- 4 files changed, 131 insertions(+), 103 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index 00a6a223212..6c6121865f0 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -27,40 +27,46 @@ static int ad714x_i2c_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume); -static int ad714x_i2c_write(struct device *dev, unsigned short reg, - unsigned short data) +static int ad714x_i2c_write(struct ad714x_chip *chip, + unsigned short reg, unsigned short data) { - struct i2c_client *client = to_i2c_client(dev); - int ret = 0; - unsigned short tx[2] = { - cpu_to_be16(reg), - cpu_to_be16(data) - }; - - ret = i2c_master_send(client, (u8 *)tx, 4); - if (ret < 0) - dev_err(&client->dev, "I2C write error\n"); - - return ret; + struct i2c_client *client = to_i2c_client(chip->dev); + int error; + + chip->xfer_buf[0] = cpu_to_be16(reg); + chip->xfer_buf[1] = cpu_to_be16(data); + + error = i2c_master_send(client, (u8 *)chip->xfer_buf, + 2 * sizeof(*chip->xfer_buf)); + if (unlikely(error < 0)) { + dev_err(&client->dev, "I2C write error: %d\n", error); + return error; + } + + return 0; } -static int ad714x_i2c_read(struct device *dev, unsigned short reg, - unsigned short *data) +static int ad714x_i2c_read(struct ad714x_chip *chip, + unsigned short reg, unsigned short *data) { - struct i2c_client *client = to_i2c_client(dev); - int ret = 0; - unsigned short tx = cpu_to_be16(reg); + struct i2c_client *client = to_i2c_client(chip->dev); + int error; + + chip->xfer_buf[0] = cpu_to_be16(reg); - ret = i2c_master_send(client, (u8 *)&tx, 2); - if (ret >= 0) - ret = i2c_master_recv(client, (u8 *)data, 2); + error = i2c_master_send(client, (u8 *)chip->xfer_buf, + sizeof(*chip->xfer_buf)); + if (error >= 0) + error = i2c_master_recv(client, (u8 *)chip->xfer_buf, + sizeof(*chip->xfer_buf)); - if (unlikely(ret < 0)) - dev_err(&client->dev, "I2C read error\n"); - else - *data = be16_to_cpu(*data); + if (unlikely(error < 0)) { + dev_err(&client->dev, "I2C read error: %d\n", error); + return error; + } - return ret; + *data = be16_to_cpup(chip->xfer_buf); + return 0; } static int __devinit ad714x_i2c_probe(struct i2c_client *client, diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index 0c7f9488f5c..306577dc0b9 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -30,31 +30,54 @@ static int ad714x_spi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); -static int ad714x_spi_read(struct device *dev, +static int ad714x_spi_read(struct ad714x_chip *chip, unsigned short reg, unsigned short *data) { - struct spi_device *spi = to_spi_device(dev); - unsigned short tx = cpu_to_be16(AD714x_SPI_CMD_PREFIX | + struct spi_device *spi = to_spi_device(chip->dev); + struct spi_message message; + struct spi_transfer xfer[2]; + int error; + + spi_message_init(&message); + memset(xfer, 0, sizeof(xfer)); + + chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg); - int ret; + xfer[0].tx_buf = &chip->xfer_buf[0]; + xfer[0].len = sizeof(chip->xfer_buf[0]); + spi_message_add_tail(&xfer[0], &message); - ret = spi_write_then_read(spi, &tx, 2, data, 2); + xfer[1].rx_buf = &chip->xfer_buf[1]; + xfer[1].len = sizeof(chip->xfer_buf[1]); + spi_message_add_tail(&xfer[1], &message); - *data = be16_to_cpup(data); + error = spi_sync(spi, &message); + if (unlikely(error)) { + dev_err(chip->dev, "SPI read error: %d\n", error); + return error; + } - return ret; + *data = be16_to_cpu(chip->xfer_buf[1]); + return 0; } -static int ad714x_spi_write(struct device *dev, +static int ad714x_spi_write(struct ad714x_chip *chip, unsigned short reg, unsigned short data) { - struct spi_device *spi = to_spi_device(dev); - unsigned short tx[2] = { - cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg), - cpu_to_be16(data) - }; + struct spi_device *spi = to_spi_device(chip->dev); + int error; - return spi_write(spi, (u8 *)tx, 4); + chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg); + chip->xfer_buf[1] = cpu_to_be16(data); + + error = spi_write(spi, (u8 *)chip->xfer_buf, + 2 * sizeof(*chip->xfer_buf)); + if (unlikely(error)) { + dev_err(chip->dev, "SPI write error: %d\n", error); + return error; + } + + return 0; } static int __devinit ad714x_spi_probe(struct spi_device *spi) diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index c3a62c42cd2..2be0366c812 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -59,7 +59,6 @@ #define STAGE11_AMBIENT 0x27D #define PER_STAGE_REG_NUM 36 -#define STAGE_NUM 12 #define STAGE_CFGREG_NUM 8 #define SYS_CFGREG_NUM 8 @@ -124,28 +123,6 @@ struct ad714x_driver_data { * information to integrate all things which will be private data * of spi/i2c device */ -struct ad714x_chip { - unsigned short h_state; - unsigned short l_state; - unsigned short c_state; - unsigned short adc_reg[STAGE_NUM]; - unsigned short amb_reg[STAGE_NUM]; - unsigned short sensor_val[STAGE_NUM]; - - struct ad714x_platform_data *hw; - struct ad714x_driver_data *sw; - - int irq; - struct device *dev; - ad714x_read_t read; - ad714x_write_t write; - - struct mutex mutex; - - unsigned product; - unsigned version; -}; - static void ad714x_use_com_int(struct ad714x_chip *ad714x, int start_stage, int end_stage) { @@ -154,13 +131,13 @@ static void ad714x_use_com_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data); data |= 1 << end_stage; - ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data); data &= ~mask; - ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); + ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } static void ad714x_use_thr_int(struct ad714x_chip *ad714x, @@ -171,13 +148,13 @@ static void ad714x_use_thr_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data); data &= ~(1 << end_stage); - ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data); data |= mask; - ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); + ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } static int ad714x_cal_highest_stage(struct ad714x_chip *ad714x, @@ -274,10 +251,8 @@ static void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx) int i; for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, &ad714x->amb_reg[i]); ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] - @@ -445,10 +420,8 @@ static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx) int i; for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, &ad714x->amb_reg[i]); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) ad714x->sensor_val[i] = ad714x->adc_reg[i] - @@ -598,10 +571,8 @@ static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx) int i; for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) { - ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, - &ad714x->adc_reg[i]); - ad714x->read(ad714x->dev, - STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); + ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, &ad714x->amb_reg[i]); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) ad714x->sensor_val[i] = ad714x->adc_reg[i] - @@ -891,7 +862,7 @@ static int ad714x_hw_detect(struct ad714x_chip *ad714x) { unsigned short data; - ad714x->read(ad714x->dev, AD714X_PARTID_REG, &data); + ad714x->read(ad714x, AD714X_PARTID_REG, &data); switch (data & 0xFFF0) { case AD7142_PARTID: ad714x->product = 0x7142; @@ -940,23 +911,22 @@ static void ad714x_hw_init(struct ad714x_chip *ad714x) for (i = 0; i < STAGE_NUM; i++) { reg_base = AD714X_STAGECFG_REG + i * STAGE_CFGREG_NUM; for (j = 0; j < STAGE_CFGREG_NUM; j++) - ad714x->write(ad714x->dev, reg_base + j, + ad714x->write(ad714x, reg_base + j, ad714x->hw->stage_cfg_reg[i][j]); } for (i = 0; i < SYS_CFGREG_NUM; i++) - ad714x->write(ad714x->dev, AD714X_SYSCFG_REG + i, + ad714x->write(ad714x, AD714X_SYSCFG_REG + i, ad714x->hw->sys_cfg_reg[i]); for (i = 0; i < SYS_CFGREG_NUM; i++) - ad714x->read(ad714x->dev, AD714X_SYSCFG_REG + i, - &data); + ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data); - ad714x->write(ad714x->dev, AD714X_STG_CAL_EN_REG, 0xFFF); + ad714x->write(ad714x, AD714X_STG_CAL_EN_REG, 0xFFF); /* clear all interrupts */ - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data); + ad714x->read(ad714x, STG_COM_INT_STA_REG, &data); } static irqreturn_t ad714x_interrupt_thread(int irq, void *data) @@ -966,9 +936,9 @@ static irqreturn_t ad714x_interrupt_thread(int irq, void *data) mutex_lock(&ad714x->mutex); - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &ad714x->l_state); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &ad714x->h_state); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &ad714x->c_state); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state); + ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &ad714x->h_state); + ad714x->read(ad714x, STG_COM_INT_STA_REG, &ad714x->c_state); for (i = 0; i < ad714x->hw->button_num; i++) ad714x_button_state_machine(ad714x, i); @@ -1245,7 +1215,7 @@ int ad714x_disable(struct ad714x_chip *ad714x) mutex_lock(&ad714x->mutex); data = ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL] | 0x3; - ad714x->write(ad714x->dev, AD714X_PWR_CTRL, data); + ad714x->write(ad714x, AD714X_PWR_CTRL, data); mutex_unlock(&ad714x->mutex); @@ -1263,16 +1233,16 @@ int ad714x_enable(struct ad714x_chip *ad714x) /* resume to non-shutdown mode */ - ad714x->write(ad714x->dev, AD714X_PWR_CTRL, + ad714x->write(ad714x, AD714X_PWR_CTRL, ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL]); /* make sure the interrupt output line is not low level after resume, * otherwise we will get no chance to enter falling-edge irq again */ - ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data); + ad714x->read(ad714x, STG_COM_INT_STA_REG, &data); mutex_unlock(&ad714x->mutex); diff --git a/drivers/input/misc/ad714x.h b/drivers/input/misc/ad714x.h index 45c54fb13f0..d12d14911fc 100644 --- a/drivers/input/misc/ad714x.h +++ b/drivers/input/misc/ad714x.h @@ -11,11 +11,40 @@ #include +#define STAGE_NUM 12 + struct device; +struct ad714x_platform_data; +struct ad714x_driver_data; struct ad714x_chip; -typedef int (*ad714x_read_t)(struct device *, unsigned short, unsigned short *); -typedef int (*ad714x_write_t)(struct device *, unsigned short, unsigned short); +typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *); +typedef int (*ad714x_write_t)(struct ad714x_chip *, unsigned short, unsigned short); + +struct ad714x_chip { + unsigned short h_state; + unsigned short l_state; + unsigned short c_state; + unsigned short adc_reg[STAGE_NUM]; + unsigned short amb_reg[STAGE_NUM]; + unsigned short sensor_val[STAGE_NUM]; + + struct ad714x_platform_data *hw; + struct ad714x_driver_data *sw; + + int irq; + struct device *dev; + ad714x_read_t read; + ad714x_write_t write; + + struct mutex mutex; + + unsigned product; + unsigned version; + + __be16 xfer_buf[16] ____cacheline_aligned; + +}; int ad714x_disable(struct ad714x_chip *ad714x); int ad714x_enable(struct ad714x_chip *ad714x); -- cgit v1.2.3-70-g09d2 From 9eff794b777ac9ca034129a1b637204000c8fb29 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 22 Aug 2011 09:45:42 -0700 Subject: Input: ad714x - read the interrupt status registers in a row The interrupt status registers should be read in row to avoid invalid data. Alter "read" method for both bus options to allow reading several registers in a row and make sure we read interrupt status registers properly. Read sequence saves 50% of bus transactions compared to single register reads. So use it also for the result registers, which are also located in a row. Also update copyright notice. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/misc/ad714x-i2c.c | 11 +++++--- drivers/input/misc/ad714x-spi.c | 11 +++++--- drivers/input/misc/ad714x.c | 62 +++++++++++++++++++++-------------------- drivers/input/misc/ad714x.h | 6 ++-- 4 files changed, 49 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index 6c6121865f0..025417d74ca 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver (I2C bus) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -47,9 +47,10 @@ static int ad714x_i2c_write(struct ad714x_chip *chip, } static int ad714x_i2c_read(struct ad714x_chip *chip, - unsigned short reg, unsigned short *data) + unsigned short reg, unsigned short *data, size_t len) { struct i2c_client *client = to_i2c_client(chip->dev); + int i; int error; chip->xfer_buf[0] = cpu_to_be16(reg); @@ -58,14 +59,16 @@ static int ad714x_i2c_read(struct ad714x_chip *chip, sizeof(*chip->xfer_buf)); if (error >= 0) error = i2c_master_recv(client, (u8 *)chip->xfer_buf, - sizeof(*chip->xfer_buf)); + len * sizeof(*chip->xfer_buf)); if (unlikely(error < 0)) { dev_err(&client->dev, "I2C read error: %d\n", error); return error; } - *data = be16_to_cpup(chip->xfer_buf); + for (i = 0; i < len; i++) + data[i] = be16_to_cpu(chip->xfer_buf[i]); + return 0; } diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index 306577dc0b9..875b5081136 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver (SPI bus) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -31,11 +31,12 @@ static int ad714x_spi_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); static int ad714x_spi_read(struct ad714x_chip *chip, - unsigned short reg, unsigned short *data) + unsigned short reg, unsigned short *data, size_t len) { struct spi_device *spi = to_spi_device(chip->dev); struct spi_message message; struct spi_transfer xfer[2]; + int i; int error; spi_message_init(&message); @@ -48,7 +49,7 @@ static int ad714x_spi_read(struct ad714x_chip *chip, spi_message_add_tail(&xfer[0], &message); xfer[1].rx_buf = &chip->xfer_buf[1]; - xfer[1].len = sizeof(chip->xfer_buf[1]); + xfer[1].len = sizeof(chip->xfer_buf[1]) * len; spi_message_add_tail(&xfer[1], &message); error = spi_sync(spi, &message); @@ -57,7 +58,9 @@ static int ad714x_spi_read(struct ad714x_chip *chip, return error; } - *data = be16_to_cpu(chip->xfer_buf[1]); + for (i = 0; i < len; i++) + data[i] = be16_to_cpu(chip->xfer_buf[i + 1]); + return 0; } diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 2be0366c812..ca42c7d2a3c 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver supporting AD7142/3/7/8/7A * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -123,6 +123,7 @@ struct ad714x_driver_data { * information to integrate all things which will be private data * of spi/i2c device */ + static void ad714x_use_com_int(struct ad714x_chip *ad714x, int start_stage, int end_stage) { @@ -131,11 +132,11 @@ static void ad714x_use_com_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1); data |= 1 << end_stage; ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1); data &= ~mask; ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } @@ -148,11 +149,11 @@ static void ad714x_use_thr_int(struct ad714x_chip *ad714x, mask = ((1 << (end_stage + 1)) - 1) - ((1 << start_stage) - 1); - ad714x->read(ad714x, STG_COM_INT_EN_REG, &data); + ad714x->read(ad714x, STG_COM_INT_EN_REG, &data, 1); data &= ~(1 << end_stage); ad714x->write(ad714x, STG_COM_INT_EN_REG, data); - ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data); + ad714x->read(ad714x, STG_HIGH_INT_EN_REG, &data, 1); data |= mask; ad714x->write(ad714x, STG_HIGH_INT_EN_REG, data); } @@ -250,13 +251,16 @@ static void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage, + &ad714x->adc_reg[hw->start_stage], + hw->end_stage - hw->start_stage + 1); + for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); + &ad714x->amb_reg[i], 1); - ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] - - ad714x->amb_reg[i]); + ad714x->sensor_val[i] = + abs(ad714x->adc_reg[i] - ad714x->amb_reg[i]); } } @@ -419,13 +423,16 @@ static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->start_stage, + &ad714x->adc_reg[hw->start_stage], + hw->end_stage - hw->start_stage + 1); + for (i = hw->start_stage; i <= hw->end_stage; i++) { - ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); + &ad714x->amb_reg[i], 1); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) - ad714x->sensor_val[i] = ad714x->adc_reg[i] - - ad714x->amb_reg[i]; + ad714x->sensor_val[i] = + ad714x->adc_reg[i] - ad714x->amb_reg[i]; else ad714x->sensor_val[i] = 0; } @@ -570,13 +577,16 @@ static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx) struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; int i; + ad714x->read(ad714x, CDC_RESULT_S0 + hw->x_start_stage, + &ad714x->adc_reg[hw->x_start_stage], + hw->x_end_stage - hw->x_start_stage + 1); + for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) { - ad714x->read(ad714x, CDC_RESULT_S0 + i, &ad714x->adc_reg[i]); ad714x->read(ad714x, STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, - &ad714x->amb_reg[i]); + &ad714x->amb_reg[i], 1); if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) - ad714x->sensor_val[i] = ad714x->adc_reg[i] - - ad714x->amb_reg[i]; + ad714x->sensor_val[i] = + ad714x->adc_reg[i] - ad714x->amb_reg[i]; else ad714x->sensor_val[i] = 0; } @@ -862,7 +872,7 @@ static int ad714x_hw_detect(struct ad714x_chip *ad714x) { unsigned short data; - ad714x->read(ad714x, AD714X_PARTID_REG, &data); + ad714x->read(ad714x, AD714X_PARTID_REG, &data, 1); switch (data & 0xFFF0) { case AD7142_PARTID: ad714x->product = 0x7142; @@ -919,14 +929,12 @@ static void ad714x_hw_init(struct ad714x_chip *ad714x) ad714x->write(ad714x, AD714X_SYSCFG_REG + i, ad714x->hw->sys_cfg_reg[i]); for (i = 0; i < SYS_CFGREG_NUM; i++) - ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data); + ad714x->read(ad714x, AD714X_SYSCFG_REG + i, &data, 1); ad714x->write(ad714x, AD714X_STG_CAL_EN_REG, 0xFFF); /* clear all interrupts */ - ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); } static irqreturn_t ad714x_interrupt_thread(int irq, void *data) @@ -936,9 +944,7 @@ static irqreturn_t ad714x_interrupt_thread(int irq, void *data) mutex_lock(&ad714x->mutex); - ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state); - ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &ad714x->h_state); - ad714x->read(ad714x, STG_COM_INT_STA_REG, &ad714x->c_state); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); for (i = 0; i < ad714x->hw->button_num; i++) ad714x_button_state_machine(ad714x, i); @@ -1225,8 +1231,6 @@ EXPORT_SYMBOL(ad714x_disable); int ad714x_enable(struct ad714x_chip *ad714x) { - unsigned short data; - dev_dbg(ad714x->dev, "%s enter\n", __func__); mutex_lock(&ad714x->mutex); @@ -1240,9 +1244,7 @@ int ad714x_enable(struct ad714x_chip *ad714x) * otherwise we will get no chance to enter falling-edge irq again */ - ad714x->read(ad714x, STG_LOW_INT_STA_REG, &data); - ad714x->read(ad714x, STG_HIGH_INT_STA_REG, &data); - ad714x->read(ad714x, STG_COM_INT_STA_REG, &data); + ad714x->read(ad714x, STG_LOW_INT_STA_REG, &ad714x->l_state, 3); mutex_unlock(&ad714x->mutex); diff --git a/drivers/input/misc/ad714x.h b/drivers/input/misc/ad714x.h index d12d14911fc..3c85455aa66 100644 --- a/drivers/input/misc/ad714x.h +++ b/drivers/input/misc/ad714x.h @@ -1,7 +1,7 @@ /* * AD714X CapTouch Programmable Controller driver (bus interfaces) * - * Copyright 2009 Analog Devices Inc. + * Copyright 2009-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -18,12 +18,12 @@ struct ad714x_platform_data; struct ad714x_driver_data; struct ad714x_chip; -typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *); +typedef int (*ad714x_read_t)(struct ad714x_chip *, unsigned short, unsigned short *, size_t); typedef int (*ad714x_write_t)(struct ad714x_chip *, unsigned short, unsigned short); struct ad714x_chip { - unsigned short h_state; unsigned short l_state; + unsigned short h_state; unsigned short c_state; unsigned short adc_reg[STAGE_NUM]; unsigned short amb_reg[STAGE_NUM]; -- cgit v1.2.3-70-g09d2 From 052605c6caa3e1edf8eee8fe5fe6d53f5721f39a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 26 Jul 2011 17:48:43 -0700 Subject: target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0 This patch changes target_emulate_inquiry_std() to set the 'not connected' (0x35) bit in standard INQUIRY response data when we are processing a request to a virtual LUN=0 mapping from struct se_device *g_lun0_dev that have been setup for us in transport_lookup_cmd_lun(). This addresses an issue where qla2xxx FC clients need to be able to create demo-mode I_T FC Nexuses by default, but should not be exposing the default set of TPG LUNs to all FC clients. This includes adding an new optional target_core_fabric_ops->tpg_check_demo_mode_login_only() caller to allow demo_mode nexuses to skip the old default of bulding a demo-mode MappedLUNs list via core_tpg_add_node_to_devs(). (roland: Add missing tpg_check_demo_mode_login_only check in core_dev_add_lun) Reported-by: Roland Dreier Cc: Andrew Vasquez Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 11 ++++++++--- drivers/target/target_core_device.c | 4 +++- drivers/target/target_core_tpg.c | 12 ++++++++++-- include/target/target_core_fabric_ops.h | 6 ++++++ 4 files changed, 27 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 8ae09a1bdf7..d095408dbd5 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -67,6 +67,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) { struct se_lun *lun = cmd->se_lun; struct se_device *dev = cmd->se_dev; + struct se_portal_group *tpg = lun->lun_sep->sep_tpg; unsigned char *buf; /* @@ -81,9 +82,13 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf = transport_kmap_first_data_page(cmd); - buf[0] = dev->transport->get_device_type(dev); - if (buf[0] == TYPE_TAPE) - buf[1] = 0x80; + if (dev == tpg->tpg_virt_lun0.lun_se_dev) { + buf[0] = 0x3f; /* Not connected */ + } else { + buf[0] = dev->transport->get_device_type(dev); + if (buf[0] == TYPE_TAPE) + buf[1] = 0x80; + } buf[2] = dev->transport->get_device_rev(dev); /* diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index b38b6c993e6..ec3fbcda3e3 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1346,7 +1346,9 @@ struct se_lun *core_dev_add_lun( struct se_node_acl *acl; spin_lock_bh(&tpg->acl_node_lock); list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { - if (acl->dynamic_node_acl) { + if (acl->dynamic_node_acl && + (!tpg->se_tpg_tfo->tpg_check_demo_mode_login_only || + !tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg))) { spin_unlock_bh(&tpg->acl_node_lock); core_tpg_add_node_to_devs(acl, tpg); spin_lock_bh(&tpg->acl_node_lock); diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index 4f1ba4c5ef1..718ccd1348b 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -298,8 +298,16 @@ struct se_node_acl *core_tpg_check_initiator_node_acl( tpg->se_tpg_tfo->tpg_release_fabric_acl(tpg, acl); return NULL; } - - core_tpg_add_node_to_devs(acl, tpg); + /* + * Here we only create demo-mode MappedLUNs from the active + * TPG LUNs if the fabric is not explictly asking for + * tpg_check_demo_mode_login_only() == 1. + */ + if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only != NULL) && + (tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg) == 1)) + do { ; } while (0); + else + core_tpg_add_node_to_devs(acl, tpg); spin_lock_bh(&tpg->acl_node_lock); list_add_tail(&acl->acl_list, &tpg->acl_node_list); diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index 2de8fe90759..126c675f4f1 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -27,6 +27,12 @@ struct target_core_fabric_ops { int (*tpg_check_demo_mode_cache)(struct se_portal_group *); int (*tpg_check_demo_mode_write_protect)(struct se_portal_group *); int (*tpg_check_prod_mode_write_protect)(struct se_portal_group *); + /* + * Optionally used by fabrics to allow demo-mode login, but not + * expose any TPG LUNs, and return 'not connected' in standard + * inquiry response + */ + int (*tpg_check_demo_mode_login_only)(struct se_portal_group *); struct se_node_acl *(*tpg_alloc_fabric_acl)( struct se_portal_group *); void (*tpg_release_fabric_acl)(struct se_portal_group *, -- cgit v1.2.3-70-g09d2 From e1750ba20f0d850c38820190ccbf0f647723091a Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Mon, 1 Aug 2011 23:58:18 +0200 Subject: target: Use ERR_CAST inlined function Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) The semantic patch that makes this output is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_configfs.c | 4 ++-- drivers/target/target_core_fabric_configfs.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c index f095e65b1cc..f1643dbf6a9 100644 --- a/drivers/target/iscsi/iscsi_target_configfs.c +++ b/drivers/target/iscsi/iscsi_target_configfs.c @@ -268,7 +268,7 @@ struct se_tpg_np *lio_target_call_addnptotpg( ISCSI_TCP); if (IS_ERR(tpg_np)) { iscsit_put_tpg(tpg); - return ERR_PTR(PTR_ERR(tpg_np)); + return ERR_CAST(tpg_np); } pr_debug("LIO_Target_ConfigFS: addnptotpg done!\n"); @@ -1285,7 +1285,7 @@ struct se_wwn *lio_target_call_coreaddtiqn( tiqn = iscsit_add_tiqn((unsigned char *)name); if (IS_ERR(tiqn)) - return ERR_PTR(PTR_ERR(tiqn)); + return ERR_CAST(tiqn); /* * Setup struct iscsi_wwn_stat_grps for se_wwn->fabric_stat_group. */ diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index f1654694f4e..55bbe0847a6 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -481,7 +481,7 @@ static struct config_group *target_fabric_make_nodeacl( se_nacl = tf->tf_ops.fabric_make_nodeacl(se_tpg, group, name); if (IS_ERR(se_nacl)) - return ERR_PTR(PTR_ERR(se_nacl)); + return ERR_CAST(se_nacl); nacl_cg = &se_nacl->acl_group; nacl_cg->default_groups = se_nacl->acl_default_groups; -- cgit v1.2.3-70-g09d2 From 9be08c5804ae4ad96ec22d0b1e71e630803a85ea Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 2 Aug 2011 10:26:36 +0200 Subject: iscsi-target: Fix leak on failure in iscsi_copy_param_list() We leak memory if the allocations for 'new_param->name' or 'new_param->value' fail in iscsi_target_parameters.c::iscsi_copy_param_list() We also do a lot of variable assignments that are completely pointless if the allocations fail. So, let's move the allocations before the assignments and also make sure that we free whatever was allocated to one if the allocation fail. There's also some small CodingStyle fixups in there (curly braces on both branches of if statement, only one variable per line) since I was in the area anyway. And finally, error messages in the function are put on a single line for easy grep'abillity. Signed-off-by: Jesper Juhl Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 43 ++++++++++---------------- 1 file changed, 16 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index 252e246cf51..497b2e718a7 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -545,13 +545,13 @@ int iscsi_copy_param_list( struct iscsi_param_list *src_param_list, int leading) { - struct iscsi_param *new_param = NULL, *param = NULL; + struct iscsi_param *param = NULL; + struct iscsi_param *new_param = NULL; struct iscsi_param_list *param_list = NULL; param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL); if (!param_list) { - pr_err("Unable to allocate memory for" - " struct iscsi_param_list.\n"); + pr_err("Unable to allocate memory for struct iscsi_param_list.\n"); goto err_out; } INIT_LIST_HEAD(¶m_list->param_list); @@ -567,8 +567,17 @@ int iscsi_copy_param_list( new_param = kzalloc(sizeof(struct iscsi_param), GFP_KERNEL); if (!new_param) { - pr_err("Unable to allocate memory for" - " struct iscsi_param.\n"); + pr_err("Unable to allocate memory for struct iscsi_param.\n"); + goto err_out; + } + + new_param->name = kstrdup(param->name, GFP_KERNEL); + new_param->value = kstrdup(param->value, GFP_KERNEL); + if (!new_param->value || !new_param->name) { + kfree(new_param->value); + kfree(new_param->name); + kfree(new_param); + pr_err("Unable to allocate memory for parameter name/value.\n"); goto err_out; } @@ -580,32 +589,12 @@ int iscsi_copy_param_list( new_param->use = param->use; new_param->type_range = param->type_range; - new_param->name = kzalloc(strlen(param->name) + 1, GFP_KERNEL); - if (!new_param->name) { - pr_err("Unable to allocate memory for" - " parameter name.\n"); - goto err_out; - } - - new_param->value = kzalloc(strlen(param->value) + 1, - GFP_KERNEL); - if (!new_param->value) { - pr_err("Unable to allocate memory for" - " parameter value.\n"); - goto err_out; - } - - memcpy(new_param->name, param->name, strlen(param->name)); - new_param->name[strlen(param->name)] = '\0'; - memcpy(new_param->value, param->value, strlen(param->value)); - new_param->value[strlen(param->value)] = '\0'; - list_add_tail(&new_param->p_list, ¶m_list->param_list); } - if (!list_empty(¶m_list->param_list)) + if (!list_empty(¶m_list->param_list)) { *dst_param_list = param_list; - else { + } else { pr_err("No parameters allocated.\n"); goto err_out; } -- cgit v1.2.3-70-g09d2 From 6fc6148865c9a17cee33f251723f6a056f022ecd Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 2 Aug 2011 12:35:02 +0200 Subject: target: Convert target_core_rd.c to use use BUG_ON Use BUG_ON(x) rather than if(x) BUG(); The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier x; @@ -if (x) BUG(); +BUG_ON(x); @@ identifier x; @@ -if (!x) BUG(); +BUG_ON(!x); // Signed-off-by: Julia Lawall Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 3dd81d24d9a..e567e129c69 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -390,12 +390,10 @@ static int rd_MEMCPY_read(struct rd_request *req) length = req->rd_size; dst = sg_virt(&sg_d[i++]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); src = sg_virt(&sg_s[j]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); dst_offset = 0; src_offset = length; @@ -415,8 +413,7 @@ static int rd_MEMCPY_read(struct rd_request *req) length = req->rd_size; dst = sg_virt(&sg_d[i]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); if (sg_d[i].length == length) { i++; @@ -425,8 +422,7 @@ static int rd_MEMCPY_read(struct rd_request *req) dst_offset = length; src = sg_virt(&sg_s[j++]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); src_offset = 0; page_end = 1; @@ -510,12 +506,10 @@ static int rd_MEMCPY_write(struct rd_request *req) length = req->rd_size; src = sg_virt(&sg_s[i++]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); dst = sg_virt(&sg_d[j]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); src_offset = 0; dst_offset = length; @@ -535,8 +529,7 @@ static int rd_MEMCPY_write(struct rd_request *req) length = req->rd_size; src = sg_virt(&sg_s[i]) + src_offset; - if (!src) - BUG(); + BUG_ON(!src); if (sg_s[i].length == length) { i++; @@ -545,8 +538,7 @@ static int rd_MEMCPY_write(struct rd_request *req) src_offset = length; dst = sg_virt(&sg_d[j++]) + dst_offset; - if (!dst) - BUG(); + BUG_ON(!dst); dst_offset = 0; page_end = 1; -- cgit v1.2.3-70-g09d2 From c2337c709102b343bd917ae00c79b266fb15b871 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 8 Aug 2011 14:02:27 -0700 Subject: iscsi-target: remove duplicate return We returned on the line before already. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index c24fb10de60..6a4ea29c2f3 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -2243,7 +2243,6 @@ static int iscsit_handle_snack( case 0: return iscsit_handle_recovery_datain_or_r2t(conn, buf, hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength); - return 0; case ISCSI_FLAG_SNACK_TYPE_STATUS: return iscsit_handle_status_snack(conn, hdr->itt, hdr->ttt, hdr->begrun, hdr->runlength); -- cgit v1.2.3-70-g09d2 From 387e96c05299ca7a0ade874f343f91f0b01086a0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 8 Aug 2011 14:06:44 -0700 Subject: iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn() This patch fixes a forever loop bug in iscsit_attach_ooo_cmdsn() while walking sess->sess_ooo_cmdsn_list when the received CmdSN is less than the tail of the list. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 980650792cf..c4c68da3e50 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -834,7 +834,7 @@ static int iscsit_attach_ooo_cmdsn( */ list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list, ooo_list) { - while (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) + if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn) continue; list_add(&ooo_cmdsn->ooo_list, -- cgit v1.2.3-70-g09d2 From 16ab8e60a0ebc22cfbe61d84e620457a15f3a0bc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 8 Aug 2011 19:03:38 -0700 Subject: target: Fix write payload exception handling with ->new_cmd_map This patch fixes a bug for fabrics using tfo->new_cmd_map() that are expect transport_generic_request_failure() to be calling transport_send_check_condition_and_sense() for both READ and WRITE, instead of only for READ exceptions. This was originally observed with a failed WRITE_SAME_16 w/ unmap=0 using tcm_loop. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index cc5a339d4d5..fd7d4518b8e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2053,8 +2053,14 @@ static void transport_generic_request_failure( cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; break; } - - if (!sc) + /* + * If a fabric does not define a cmd->se_tfo->new_cmd_map caller, + * make the call to transport_send_check_condition_and_sense() + * directly. Otherwise expect the fabric to make the call to + * transport_send_check_condition_and_sense() after handling + * possible unsoliticied write data payloads. + */ + if (!sc && !cmd->se_tfo->new_cmd_map) transport_new_cmd_failure(cmd); else { ret = transport_send_check_condition_and_sense(cmd, -- cgit v1.2.3-70-g09d2 From 706d5860969b3b24d65d9a57bd3bb5e4a1419c08 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 28 Jul 2011 00:07:03 -0700 Subject: target: Add WRITE_SAME (10) parsing and refactor passthrough checks This patch adds initial WRITE_SAME (10) w/ UNMAP=1 support following updates in sbcr26 to allow UNMAP=1 for the non 16 + 32 byte CDB case. It also refactors current pSCSI passthrough passthrough checks into target_check_write_same_discard() ahead of UNMAP=0 w/ write payload support into target_core_iblock.c. This includes the support for handling WRITE_SAME in transport_emulate_control_cdb(), and converts target_emulate_write_same to accept num_blocks directly for WRITE_SAME, WRITE_SAME_16 and WRITE_SAME_32. Reported-by: Eric Seppanen Cc: Roland Dreier Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 28 +++++---- drivers/target/target_core_transport.c | 102 ++++++++++++++++++--------------- 2 files changed, 73 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index d095408dbd5..4c1d3a98e89 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -1090,24 +1090,17 @@ err: * Note this is not used for TCM/pSCSI passthrough */ static int -target_emulate_write_same(struct se_task *task, int write_same32) +target_emulate_write_same(struct se_task *task, u32 num_blocks) { struct se_cmd *cmd = task->task_se_cmd; struct se_device *dev = cmd->se_dev; sector_t range; sector_t lba = cmd->t_task_lba; - unsigned int num_blocks; int ret; /* - * Extract num_blocks from the WRITE_SAME_* CDB. Then use the explict - * range when non zero is supplied, otherwise calculate the remaining - * range based on ->get_blocks() - starting LBA. + * Use the explicit range when non zero is supplied, otherwise calculate + * the remaining range based on ->get_blocks() - starting LBA. */ - if (write_same32) - num_blocks = get_unaligned_be32(&cmd->t_task_cdb[28]); - else - num_blocks = get_unaligned_be32(&cmd->t_task_cdb[10]); - if (num_blocks != 0) range = num_blocks; else @@ -1170,13 +1163,23 @@ transport_emulate_control_cdb(struct se_task *task) } ret = target_emulate_unmap(task); break; + case WRITE_SAME: + if (!dev->transport->do_discard) { + pr_err("WRITE_SAME emulation not supported" + " for: %s\n", dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + ret = target_emulate_write_same(task, + get_unaligned_be16(&cmd->t_task_cdb[7])); + break; case WRITE_SAME_16: if (!dev->transport->do_discard) { pr_err("WRITE_SAME_16 emulation not supported" " for: %s\n", dev->transport->name); return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; } - ret = target_emulate_write_same(task, 0); + ret = target_emulate_write_same(task, + get_unaligned_be32(&cmd->t_task_cdb[10])); break; case VARIABLE_LENGTH_CMD: service_action = @@ -1189,7 +1192,8 @@ transport_emulate_control_cdb(struct se_task *task) dev->transport->name); return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; } - ret = target_emulate_write_same(task, 1); + ret = target_emulate_write_same(task, + get_unaligned_be32(&cmd->t_task_cdb[28])); break; default: pr_err("Unsupported VARIABLE_LENGTH_CMD SA:" diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index fd7d4518b8e..eb8055aa6e6 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2861,6 +2861,38 @@ static int transport_cmd_get_valid_sectors(struct se_cmd *cmd) return sectors; } +static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev) +{ + /* + * Determine if the received WRITE_SAME is used to for direct + * passthrough into Linux/SCSI with struct request via TCM/pSCSI + * or we are signaling the use of internal WRITE_SAME + UNMAP=1 + * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK code. + */ + int passthrough = (dev->transport->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + + if (!passthrough) { + if ((flags[0] & 0x04) || (flags[0] & 0x02)) { + pr_err("WRITE_SAME PBDATA and LBDATA" + " bits not supported for Block Discard" + " Emulation\n"); + return -ENOSYS; + } + /* + * Currently for the emulated case we only accept + * tpws with the UNMAP=1 bit set. + */ + if (!(flags[0] & 0x08)) { + pr_err("WRITE_SAME w/o UNMAP bit not" + " supported for Block Discard Emulation\n"); + return -ENOSYS; + } + } + + return 0; +} + /* transport_generic_cmd_sequencer(): * * Generic Command Sequencer that should work for most DAS transport @@ -3081,27 +3113,9 @@ static int transport_generic_cmd_sequencer( cmd->t_task_lba = get_unaligned_be64(&cdb[12]); cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; - /* - * Skip the remaining assignments for TCM/PSCSI passthrough - */ - if (passthrough) - break; - - if ((cdb[10] & 0x04) || (cdb[10] & 0x02)) { - pr_err("WRITE_SAME PBDATA and LBDATA" - " bits not supported for Block Discard" - " Emulation\n"); + if (target_check_write_same_discard(&cdb[10], dev) < 0) goto out_invalid_cdb_field; - } - /* - * Currently for the emulated case we only accept - * tpws with the UNMAP=1 bit set. - */ - if (!(cdb[10] & 0x08)) { - pr_err("WRITE_SAME w/o UNMAP bit not" - " supported for Block Discard Emulation\n"); - goto out_invalid_cdb_field; - } + break; default: pr_err("VARIABLE_LENGTH_CMD service action" @@ -3358,33 +3372,31 @@ static int transport_generic_cmd_sequencer( } cmd->t_task_lba = get_unaligned_be64(&cdb[2]); - passthrough = (dev->transport->transport_type == - TRANSPORT_PLUGIN_PHBA_PDEV); - /* - * Determine if the received WRITE_SAME_16 is used to for direct - * passthrough into Linux/SCSI with struct request via TCM/pSCSI - * or we are signaling the use of internal WRITE_SAME + UNMAP=1 - * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK and - * TCM/FILEIO subsystem plugin backstores. - */ - if (!passthrough) { - if ((cdb[1] & 0x04) || (cdb[1] & 0x02)) { - pr_err("WRITE_SAME PBDATA and LBDATA" - " bits not supported for Block Discard" - " Emulation\n"); - goto out_invalid_cdb_field; - } - /* - * Currently for the emulated case we only accept - * tpws with the UNMAP=1 bit set. - */ - if (!(cdb[1] & 0x08)) { - pr_err("WRITE_SAME w/o UNMAP bit not " - " supported for Block Discard Emulation\n"); - goto out_invalid_cdb_field; - } + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + + if (target_check_write_same_discard(&cdb[1], dev) < 0) + goto out_invalid_cdb_field; + break; + case WRITE_SAME: + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + + if (sectors) + size = transport_get_size(sectors, cdb, cmd); + else { + pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); + goto out_invalid_cdb_field; } + + cmd->t_task_lba = get_unaligned_be32(&cdb[2]); cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + /* + * Follow sbcr26 with WRITE_SAME (10) and check for the existence + * of byte 1 bit 3 UNMAP instead of original reserved field + */ + if (target_check_write_same_discard(&cdb[1], dev) < 0) + goto out_invalid_cdb_field; break; case ALLOW_MEDIUM_REMOVAL: case GPCMD_CLOSE_TRACK: -- cgit v1.2.3-70-g09d2 From 12850626e2717f866a94e6ced724e3efe5a0aab8 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 8 Aug 2011 19:08:23 -0700 Subject: target: Fix WRITE_SAME usage with transport_get_size For all flavours of WRITE_SAME, we only expect to handle a single block of data-out buffer payload, regardless of the number of logical blocks presented in the CDB. This patch changes all flavours of WRITE_SAME in transport_generic_cmd_sequencer() to pass '1' into transport_get_size() instead of the extracted 'sectors' to properly handle the default usage of sg_write_same without the --xferlen parameter. Reported-by: Eric Seppanen Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index eb8055aa6e6..d35c2cc779e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3103,7 +3103,7 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; if (sectors) - size = transport_get_size(sectors, cdb, cmd); + size = transport_get_size(1, cdb, cmd); else { pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not" " supported\n"); @@ -3365,7 +3365,7 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; if (sectors) - size = transport_get_size(sectors, cdb, cmd); + size = transport_get_size(1, cdb, cmd); else { pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); goto out_invalid_cdb_field; @@ -3383,7 +3383,7 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; if (sectors) - size = transport_get_size(sectors, cdb, cmd); + size = transport_get_size(1, cdb, cmd); else { pr_err("WSNZ=1, WRITE_SAME w/sectors=0 not supported\n"); goto out_invalid_cdb_field; -- cgit v1.2.3-70-g09d2 From 72f4ba1e32a1e5da31dcf14ea4b8985ae88a8bdb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 9 Aug 2011 22:53:02 -0700 Subject: target: Remove duplicate task completions in transport_emulate_control_cdb This patch removes a duplicate set of transport_complete_task() calls in target_emulate_unmap() and target_emulate_write_same() as the completion call is already done within transport_emulate_control_cdb() This patch also adds a check in transport_emulate_control_cdb() for the existing SCF_EMULATE_CDB_ASYNC flag currently used by SYNCHRONIZE_CACHE in order to handle IMMEDIATE processing. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 4c1d3a98e89..40ad142f7cb 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -1077,8 +1077,6 @@ target_emulate_unmap(struct se_task *task) size -= 16; } - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); err: transport_kunmap_first_data_page(cmd); @@ -1115,8 +1113,6 @@ target_emulate_write_same(struct se_task *task, u32 num_blocks) return ret; } - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); return 0; } @@ -1228,8 +1224,14 @@ transport_emulate_control_cdb(struct se_task *task) if (ret < 0) return ret; - task->task_scsi_status = GOOD; - transport_complete_task(task, 1); + /* + * Handle the successful completion here unless a caller + * has explictly requested an asychronous completion. + */ + if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) { + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + } return PYX_TRANSPORT_SENT_TO_TRANSPORT; } -- cgit v1.2.3-70-g09d2 From 7abbe7f3e4243e28a9169ee1b8d76f10a6f5d37c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 10 Aug 2011 18:41:14 -0700 Subject: target: Fix SYNCHRONIZE_CACHE zero LBA + range breakage This patch fixes a SYNCHRONIZE_CACHE CDB handling bug with IBLOCK/FILEIO backends where transport_cmd_get_valid_sectors() was incorrectly rejecting a zero LBA + range CDB from being processed, and returning CHECK_CONDITION. This includes changing transport_cmd_get_valid_sectors() to return '0' on success and '-EINVAL' on failure (this makes more sense than sectors), and to only check transport_cmd_get_valid_sectors() when a non zero LBA + range SYNCHRONIZE_CACHE operation has been receieved for the non passthrough case. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d35c2cc779e..d385c317a7a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2853,12 +2853,10 @@ static int transport_cmd_get_valid_sectors(struct se_cmd *cmd) " transport_dev_end_lba(): %llu\n", cmd->t_task_lba, sectors, transport_dev_end_lba(dev)); - pr_err(" We should return CHECK_CONDITION" - " but we don't yet\n"); - return 0; + return -EINVAL; } - return sectors; + return 0; } static int target_check_write_same_discard(unsigned char *flags, struct se_device *dev) @@ -3350,10 +3348,12 @@ static int transport_generic_cmd_sequencer( cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC; /* * Check to ensure that LBA + Range does not exceed past end of - * device. + * device for IBLOCK and FILEIO ->do_sync_cache() backend calls */ - if (!transport_cmd_get_valid_sectors(cmd)) - goto out_invalid_cdb_field; + if ((cmd->t_task_lba != 0) || (sectors != 0)) { + if (transport_cmd_get_valid_sectors(cmd) < 0) + goto out_invalid_cdb_field; + } break; case UNMAP: size = get_unaligned_be16(&cdb[7]); -- cgit v1.2.3-70-g09d2 From 01cde4d54327884a0b61ce8666092f5703557d4b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 10 Aug 2011 00:59:58 -0700 Subject: target: Add missing DATA_SG_IO transport_cmd_get_valid_sectors check This patch adds the missing transport_cmd_get_valid_sectors() check for SCF_SCSI_DATA_SG_IO_CDB type payloads to ensure that a received LBA + range does not exeed past the end of associated backend struct se_device. This patch also fixes a bug in the failure path of transport_new_cmd_obj() where this check can fail, so change to use a signed 'rc' and return '-EINVAL' to signal proper transport_generic_request_failure() handling. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d385c317a7a..ab61c555085 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3891,9 +3891,7 @@ EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); static int transport_new_cmd_obj(struct se_cmd *cmd) { struct se_device *dev = cmd->se_dev; - u32 task_cdbs; - u32 rc; - int set_counts = 1; + int set_counts = 1, rc, task_cdbs; /* * Setup any BIDI READ tasks and memory from @@ -3911,7 +3909,7 @@ static int transport_new_cmd_obj(struct se_cmd *cmd) cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - return PYX_TRANSPORT_LU_COMM_FAILURE; + return -EINVAL; } atomic_inc(&cmd->t_fe_count); atomic_inc(&cmd->t_se_count); @@ -3930,7 +3928,7 @@ static int transport_new_cmd_obj(struct se_cmd *cmd) cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - return PYX_TRANSPORT_LU_COMM_FAILURE; + return -EINVAL; } if (set_counts) { @@ -4248,10 +4246,13 @@ static u32 transport_allocate_tasks( struct scatterlist *sgl, unsigned int sgl_nents) { - if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) + if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) { + if (transport_cmd_get_valid_sectors(cmd) < 0) + return -EINVAL; + return transport_allocate_data_tasks(cmd, lba, data_direction, sgl, sgl_nents); - else + } else return transport_allocate_control_task(cmd); } -- cgit v1.2.3-70-g09d2 From 525a48a21da259d00d6ebc5b60563b5bcf022c26 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 13 Aug 2011 02:11:38 -0700 Subject: target: Fix task count > 1 handling breakage and use max_sector page alignment This patch addresses recent breakage with multiple se_task (task_count > 1) operation following backend dev->se_sub_dev->se_dev_attrib.max_sectors in new transport_allocate_data_tasks() code. The initial bug here was a bogus task->task_sg_nents assignment in transport_allocate_data_tasks() based on the passed parameter, which now uses DIV_ROUND_UP(task_size, PAGE_SIZE) to determine the proper number of per task SGL entries for the (task_count > 1) case. This also means we now need to enforce a PAGE_SIZE aligned max_sector count value for this to work as expected without bringing back the pre v3.1 transport_map_mem_to_sg() logic to handle SGL offsets across multiple tasks. So this patch adds se_dev_align_max_sectors() to round down max_sectors as necessary to ensure this alignment via se_dev_set_default_attribs() and se_dev_align_max_sectors() and keeps it simple for (task_count > 1) operation. So far this bugfix has been tested with (task_count > 1) operation using iscsi-target and iblock backends. Reported-by: Chris Boot Cc: Kiran Patil Cc: Andy Grover Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 28 ++++++++++++++++++++++++++++ drivers/target/target_core_transport.c | 7 +++++-- 2 files changed, 33 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index ec3fbcda3e3..4b5237f500a 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -839,6 +839,24 @@ int se_dev_check_shutdown(struct se_device *dev) return ret; } +u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size) +{ + u32 tmp, aligned_max_sectors; + /* + * Limit max_sectors to a PAGE_SIZE aligned value for modern + * transport_allocate_data_tasks() operation. + */ + tmp = rounddown((max_sectors * block_size), PAGE_SIZE); + aligned_max_sectors = (tmp / block_size); + if (max_sectors != aligned_max_sectors) { + printk(KERN_INFO "Rounding down aligned max_sectors from %u" + " to %u\n", max_sectors, aligned_max_sectors); + return aligned_max_sectors; + } + + return max_sectors; +} + void se_dev_set_default_attribs( struct se_device *dev, struct se_dev_limits *dev_limits) @@ -878,6 +896,11 @@ void se_dev_set_default_attribs( * max_sectors is based on subsystem plugin dependent requirements. */ dev->se_sub_dev->se_dev_attrib.hw_max_sectors = limits->max_hw_sectors; + /* + * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks() + */ + limits->max_sectors = se_dev_align_max_sectors(limits->max_sectors, + limits->logical_block_size); dev->se_sub_dev->se_dev_attrib.max_sectors = limits->max_sectors; /* * Set optimal_sectors from max_sectors, which can be lowered via @@ -1242,6 +1265,11 @@ int se_dev_set_max_sectors(struct se_device *dev, u32 max_sectors) return -EINVAL; } } + /* + * Align max_sectors down to PAGE_SIZE to follow transport_allocate_data_tasks() + */ + max_sectors = se_dev_align_max_sectors(max_sectors, + dev->se_sub_dev->se_dev_attrib.block_size); dev->se_sub_dev->se_dev_attrib.max_sectors = max_sectors; pr_debug("dev[%p]: SE Device max_sectors changed to %u\n", diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index ab61c555085..efac6a9a743 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4126,7 +4126,11 @@ static int transport_allocate_data_tasks( /* Update new cdb with updated lba/sectors */ cmd->transport_split_cdb(task->task_lba, task->task_sectors, cdb); - + /* + * This now assumes that passed sg_ents are in PAGE_SIZE chunks + * in order to calculate the number per task SGL entries + */ + task->task_sg_nents = DIV_ROUND_UP(task->task_size, PAGE_SIZE); /* * Check if the fabric module driver is requesting that all * struct se_task->task_sg[] be chained together.. If so, @@ -4136,7 +4140,6 @@ static int transport_allocate_data_tasks( * It's so much easier and only a waste when task_count > 1. * That is extremely rare. */ - task->task_sg_nents = sgl_nents; if (cmd->se_tfo->task_sg_chaining) { task->task_sg_nents++; task->task_padded_sg = 1; -- cgit v1.2.3-70-g09d2 From c3c74c7a33d837be391ab61aaae39bb21f16736a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 13 Aug 2011 05:30:31 -0700 Subject: target: Fix task SGL chaining breakage with transport_allocate_data_tasks This patch fixes two bugs associated with transport_do_task_sg_chain() operation where transport_allocate_data_tasks() was incorrectly setting task_padded_sg for all tasks, and causing bogus task->task_sg_nents assignments + OOPsen with fabrics depending upon this code. The first bit here adds a task_sg_nents_padded check in transport_allocate_data_tasks() to include an extra SGL vector when necessary for tasks that expect to be linked using sg_chain(). The second change involves making transport_do_task_sg_chain() properly account for the extra SGL vector when task->task_padded_sg is set for the non trailing ->task_sg or single ->task_sg allocations. Note this patch also removes the BUG_ON(!task->task_padded_sg) check within transport_do_task_sg_chain() as we expect this to happen normally with the updated logic in transport_allocate_data_tasks(), along with being bogus for CONTROL_SG_IO_CDB type payloads. So far this bugfix has been tested with tcm_qla2xxx and iblock backends in (task_count > 1)( and (task_count == 1) operation. Reported-by: Kiran Patil Cc: Kiran Patil Cc: Andy Grover Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index efac6a9a743..9cc49d1b5b1 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4044,8 +4044,6 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) if (!task->task_sg) continue; - BUG_ON(!task->task_padded_sg); - if (!sg_first) { sg_first = task->task_sg; chained_nents = task->task_sg_nents; @@ -4053,9 +4051,19 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_chain(sg_prev, sg_prev_nents, task->task_sg); chained_nents += task->task_sg_nents; } + /* + * For the padded tasks, use the extra SGL vector allocated + * in transport_allocate_data_tasks() for the sg_prev_nents + * offset into sg_chain() above.. The last task of a + * multi-task list, or a single task will not have + * task->task_sg_padded set.. + */ + if (task->task_padded_sg) + sg_prev_nents = (task->task_sg_nents + 1); + else + sg_prev_nents = task->task_sg_nents; sg_prev = task->task_sg; - sg_prev_nents = task->task_sg_nents; } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4107,7 +4115,7 @@ static int transport_allocate_data_tasks( cmd_sg = sgl; for (i = 0; i < task_count; i++) { - unsigned int task_size; + unsigned int task_size, task_sg_nents_padded; int count; task = transport_generic_get_task(cmd, data_direction); @@ -4135,24 +4143,24 @@ static int transport_allocate_data_tasks( * Check if the fabric module driver is requesting that all * struct se_task->task_sg[] be chained together.. If so, * then allocate an extra padding SG entry for linking and - * marking the end of the chained SGL. - * Possibly over-allocate task sgl size by using cmd sgl size. - * It's so much easier and only a waste when task_count > 1. - * That is extremely rare. + * marking the end of the chained SGL for every task except + * the last one for (task_count > 1) operation, or skipping + * the extra padding for the (task_count == 1) case. */ - if (cmd->se_tfo->task_sg_chaining) { - task->task_sg_nents++; + if (cmd->se_tfo->task_sg_chaining && (i < (task_count - 1))) { + task_sg_nents_padded = (task->task_sg_nents + 1); task->task_padded_sg = 1; - } + } else + task_sg_nents_padded = task->task_sg_nents; task->task_sg = kmalloc(sizeof(struct scatterlist) * - task->task_sg_nents, GFP_KERNEL); + task_sg_nents_padded, GFP_KERNEL); if (!task->task_sg) { cmd->se_dev->transport->free_task(task); return -ENOMEM; } - sg_init_table(task->task_sg, task->task_sg_nents); + sg_init_table(task->task_sg, task_sg_nents_padded); task_size = task->task_size; -- cgit v1.2.3-70-g09d2 From 6626a0572657a0945a7b9ccf4a6d6ad1750f9adc Mon Sep 17 00:00:00 2001 From: Chris Boot Date: Sat, 13 Aug 2011 22:10:46 -0700 Subject: iscsi-target: Implement iSCSI target IPv6 address printing. The iSCSI target configfs code to print out an initiator's IPv6 address is not fully implemented. This patch uses snprintf() with the "%pI6c" format string to format the IPv6 address for display purposes. Signed-off-by: Chris Boot Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index bcaf82f4703..daad362a93c 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -1013,19 +1013,9 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) ISCSI_LOGIN_STATUS_TARGET_ERROR); goto new_sess_out; } -#if 0 - if (!iscsi_ntop6((const unsigned char *) - &sock_in6.sin6_addr.in6_u, - (char *)&conn->ipv6_login_ip[0], - IPV6_ADDRESS_SPACE)) { - pr_err("iscsi_ntop6() failed\n"); - iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, - ISCSI_LOGIN_STATUS_TARGET_ERROR); - goto new_sess_out; - } -#else - pr_debug("Skipping iscsi_ntop6()\n"); -#endif + snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c", + &sock_in6.sin6_addr.in6_u); + conn->login_port = ntohs(sock_in6.sin6_port); } else { memset(&sock_in, 0, sizeof(struct sockaddr_in)); -- cgit v1.2.3-70-g09d2 From ba7736696341ad4253125055c0c85aa9f42959a0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 13 Aug 2011 22:35:00 -0700 Subject: iscsi-target: Fix iscsit_allocate_se_cmd_for_tmr failure path bugs This patch fixes two bugs in allocation failure handling in iscsit_allocate_se_cmd_for_tmr(): This first reported by DanC is a free-after call to transport_free_se_cmd(), this patch drops the transport_free_se_cmd() call all together, as iscsit_release_cmd() will release existing allocations as expected. The second is a bug where iscsi_cmd_t was being leaked on a cmd->tmr_req allocation failure, so make this jump to iscsit_release_cmd() as well. Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a1acb016790..a0d23bc0fc9 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -243,7 +243,7 @@ struct iscsi_cmd *iscsit_allocate_se_cmd_for_tmr( if (!cmd->tmr_req) { pr_err("Unable to allocate memory for" " Task Management command!\n"); - return NULL; + goto out; } /* * TASK_REASSIGN for ERL=2 / connection stays inside of @@ -298,8 +298,6 @@ struct iscsi_cmd *iscsit_allocate_se_cmd_for_tmr( return cmd; out: iscsit_release_cmd(cmd); - if (se_cmd) - transport_free_se_cmd(se_cmd); return NULL; } -- cgit v1.2.3-70-g09d2 From f15ea5780d08e4c96930c0d607d05e480ec588c8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 12 Aug 2011 10:01:24 -0700 Subject: target: Print subpage too for unhandled MODE SENSE pages Make a log message more useful by printing both the page and subpage that an initiator is requesting. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 40ad142f7cb..89ae923c5da 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -920,8 +920,8 @@ target_emulate_modesense(struct se_cmd *cmd, int ten) length += target_modesense_control(dev, &buf[offset+length]); break; default: - pr_err("Got Unknown Mode Page: 0x%02x\n", - cdb[2] & 0x3f); + pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", + cdb[2] & 0x3f, cdb[3]); return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; } offset += length; -- cgit v1.2.3-70-g09d2 From 4e0f05297ff615a9a4e269da301ff77f660a3ab0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 12 Aug 2011 10:16:52 -0700 Subject: tcm_fc: init/exit functions should not be protected by "#ifdef MODULE" There's no need for the #ifdef protection when building into the kernel, and in fact we need the module_init() for the initialization function to be called. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/tcm_fc/tfc_conf.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 8781d1e423d..520a8baae79 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -655,9 +655,7 @@ static void __exit ft_exit(void) synchronize_rcu(); } -#ifdef MODULE MODULE_DESCRIPTION("FC TCM fabric driver " FT_VERSION); MODULE_LICENSE("GPL"); module_init(ft_init); module_exit(ft_exit); -#endif /* MODULE */ -- cgit v1.2.3-70-g09d2 From e63a8e1933a2218cf801e46dd01bd8cca4a555ec Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 12 Aug 2011 16:01:02 -0700 Subject: target: Make locking in transport_deregister_session() IRQ safe At least the tcm_qla2xxx fabric driver calls into transport_deregister_session() while holding an IRQ-disabled spinlock, so the inner locking needs to use spin_lock_irqsave() instead of spin_lock_bh(). This fixes warnings seen with tcm_qla2xxx like: WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x98/0xb0() Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] warn_slowpath_null+0x1a/0x20 [] local_bh_enable_ip+0x98/0xb0 [] _raw_spin_unlock_bh+0x14/0x20 [] transport_deregister_session+0x96/0x180 [target_core_mod] [] tcm_qla2xxx_free_session+0xd1/0x170 [tcm_qla2xxx] [] qla_tgt_sess_put+0xc3/0x140 [qla2xxx] [] qla_tgt_stop_phase1+0x8f/0x2c0 [qla2xxx] [] tcm_qla2xxx_tpg_store_enable+0x6e/0xd0 [tcm_qla2xxx] [] target_fabric_tpg_attr_store+0x39/0x40 [target_core_mod] [] configfs_write_file+0xbd/0x120 [configfs] [] vfs_write+0xc6/0x180 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9cc49d1b5b1..8d0c58ea631 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -389,17 +389,18 @@ void transport_deregister_session(struct se_session *se_sess) { struct se_portal_group *se_tpg = se_sess->se_tpg; struct se_node_acl *se_nacl; + unsigned long flags; if (!se_tpg) { transport_free_session(se_sess); return; } - spin_lock_bh(&se_tpg->session_lock); + spin_lock_irqsave(&se_tpg->session_lock, flags); list_del(&se_sess->sess_list); se_sess->se_tpg = NULL; se_sess->fabric_sess_ptr = NULL; - spin_unlock_bh(&se_tpg->session_lock); + spin_unlock_irqrestore(&se_tpg->session_lock, flags); /* * Determine if we need to do extra work for this initiator node's @@ -407,22 +408,22 @@ void transport_deregister_session(struct se_session *se_sess) */ se_nacl = se_sess->se_node_acl; if (se_nacl) { - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irqsave(&se_tpg->acl_node_lock, flags); if (se_nacl->dynamic_node_acl) { if (!se_tpg->se_tpg_tfo->tpg_check_demo_mode_cache( se_tpg)) { list_del(&se_nacl->acl_list); se_tpg->num_node_acls--; - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags); core_tpg_wait_for_nacl_pr_ref(se_nacl); core_free_device_list_for_node(se_nacl, se_tpg); se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, se_nacl); - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irqsave(&se_tpg->acl_node_lock, flags); } } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irqrestore(&se_tpg->acl_node_lock, flags); } transport_free_session(se_sess); -- cgit v1.2.3-70-g09d2 From 28638887f351d11867562322b7abaa014dd5528a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 16 Aug 2011 09:40:01 -0700 Subject: target: Convert acl_node_lock to be IRQ-disabling With qla2xxx, acl_node_lock is taken inside qla2xxx's hardware_lock, which is taken in hardirq context. This means acl_node_lock must become an IRQ-disabling lock; in particular this fixes lockdep warnings along the lines of ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] (&(&se_tpg->acl_node_lock)->rlock){+.....}, at: [] transport_deregister_session+0x92/0x140 [target_core_mod] and this task is already holding: (&(&ha->hardware_lock)->rlock){-.-...}, at: [] qla_tgt_stop_phase1+0x57/0x2c0 [qla2xxx] which would create a new lock dependency: (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->acl_node_lock)->rlock){+.....} but this new dependency connects a HARDIRQ-irq-safe lock: (&(&ha->hardware_lock)->rlock){-.-...} to a HARDIRQ-irq-unsafe lock: (&(&se_tpg->acl_node_lock)->rlock){+.....} Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 16 ++++++------ drivers/target/target_core_pr.c | 8 +++--- drivers/target/target_core_tpg.c | 52 ++++++++++++++++++------------------- drivers/target/tcm_fc/tfc_conf.c | 4 +-- 4 files changed, 40 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 4b5237f500a..ca6e4a4df13 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -472,9 +472,9 @@ void core_clear_lun_from_tpg(struct se_lun *lun, struct se_portal_group *tpg) struct se_dev_entry *deve; u32 i; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(nacl, &tpg->acl_node_list, acl_list) { - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_irq(&nacl->device_list_lock); for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { @@ -491,9 +491,9 @@ void core_clear_lun_from_tpg(struct se_lun *lun, struct se_portal_group *tpg) } spin_unlock_irq(&nacl->device_list_lock); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); } static struct se_port *core_alloc_port(struct se_device *dev) @@ -1372,17 +1372,17 @@ struct se_lun *core_dev_add_lun( */ if (tpg->se_tpg_tfo->tpg_check_demo_mode(tpg)) { struct se_node_acl *acl; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { if (acl->dynamic_node_acl && (!tpg->se_tpg_tfo->tpg_check_demo_mode_login_only || !tpg->se_tpg_tfo->tpg_check_demo_mode_login_only(tpg))) { - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); core_tpg_add_node_to_devs(acl, tpg); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); } } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); } return lun_p; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 1c1b849cd4f..7fd3a161f7c 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1598,14 +1598,14 @@ static int core_scsi3_decode_spec_i_port( * from the decoded fabric module specific TransportID * at *i_str. */ - spin_lock_bh(&tmp_tpg->acl_node_lock); + spin_lock_irq(&tmp_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl( tmp_tpg, i_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } - spin_unlock_bh(&tmp_tpg->acl_node_lock); + spin_unlock_irq(&tmp_tpg->acl_node_lock); if (!dest_node_acl) { core_scsi3_tpg_undepend_item(tmp_tpg); @@ -3496,14 +3496,14 @@ after_iport_check: /* * Locate the destination struct se_node_acl from the received Transport ID */ - spin_lock_bh(&dest_se_tpg->acl_node_lock); + spin_lock_irq(&dest_se_tpg->acl_node_lock); dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg, initiator_str); if (dest_node_acl) { atomic_inc(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_inc(); } - spin_unlock_bh(&dest_se_tpg->acl_node_lock); + spin_unlock_irq(&dest_se_tpg->acl_node_lock); if (!dest_node_acl) { pr_err("Unable to locate %s dest_node_acl for" diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index 718ccd1348b..162b736c734 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -137,15 +137,15 @@ struct se_node_acl *core_tpg_get_initiator_node_acl( { struct se_node_acl *acl; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { if (!strcmp(acl->initiatorname, initiatorname) && !acl->dynamic_node_acl) { - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return acl; } } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return NULL; } @@ -309,10 +309,10 @@ struct se_node_acl *core_tpg_check_initiator_node_acl( else core_tpg_add_node_to_devs(acl, tpg); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_add_tail(&acl->acl_list, &tpg->acl_node_list); tpg->num_node_acls++; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); pr_debug("%s_TPG[%u] - Added DYNAMIC ACL with TCQ Depth: %d for %s" " Initiator Node: %s\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -362,7 +362,7 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( { struct se_node_acl *acl = NULL; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); if (acl) { if (acl->dynamic_node_acl) { @@ -370,7 +370,7 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( pr_debug("%s_TPG[%u] - Replacing dynamic ACL" " for %s\n", tpg->se_tpg_tfo->get_fabric_name(), tpg->se_tpg_tfo->tpg_get_tag(tpg), initiatorname); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); /* * Release the locally allocated struct se_node_acl * because * core_tpg_add_initiator_node_acl() returned @@ -386,10 +386,10 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( " Node %s already exists for TPG %u, ignoring" " request.\n", tpg->se_tpg_tfo->get_fabric_name(), initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return ERR_PTR(-EEXIST); } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); if (!se_nacl) { pr_err("struct se_node_acl pointer is NULL\n"); @@ -426,10 +426,10 @@ struct se_node_acl *core_tpg_add_initiator_node_acl( return ERR_PTR(-EINVAL); } - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); list_add_tail(&acl->acl_list, &tpg->acl_node_list); tpg->num_node_acls++; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); done: pr_debug("%s_TPG[%hu] - Added ACL with TCQ Depth: %d for %s" @@ -453,14 +453,14 @@ int core_tpg_del_initiator_node_acl( struct se_session *sess, *sess_tmp; int dynamic_acl = 0; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (acl->dynamic_node_acl) { acl->dynamic_node_acl = 0; dynamic_acl = 1; } list_del(&acl->acl_list); tpg->num_node_acls--; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_bh(&tpg->session_lock); list_for_each_entry_safe(sess, sess_tmp, @@ -511,21 +511,21 @@ int core_tpg_set_initiator_node_queue_depth( struct se_node_acl *acl; int dynamic_acl = 0; - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); if (!acl) { pr_err("Access Control List entry for %s Initiator" " Node %s does not exists for TPG %hu, ignoring" " request.\n", tpg->se_tpg_tfo->get_fabric_name(), initiatorname, tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -ENODEV; } if (acl->dynamic_node_acl) { acl->dynamic_node_acl = 0; dynamic_acl = 1; } - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); spin_lock_bh(&tpg->session_lock); list_for_each_entry(sess, &tpg->tpg_sess_list, sess_list) { @@ -541,10 +541,10 @@ int core_tpg_set_initiator_node_queue_depth( tpg->se_tpg_tfo->get_fabric_name(), initiatorname); spin_unlock_bh(&tpg->session_lock); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -EEXIST; } /* @@ -579,10 +579,10 @@ int core_tpg_set_initiator_node_queue_depth( if (init_sess) tpg->se_tpg_tfo->close_session(init_sess); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return -EINVAL; } spin_unlock_bh(&tpg->session_lock); @@ -598,10 +598,10 @@ int core_tpg_set_initiator_node_queue_depth( initiatorname, tpg->se_tpg_tfo->get_fabric_name(), tpg->se_tpg_tfo->tpg_get_tag(tpg)); - spin_lock_bh(&tpg->acl_node_lock); + spin_lock_irq(&tpg->acl_node_lock); if (dynamic_acl) acl->dynamic_node_acl = 1; - spin_unlock_bh(&tpg->acl_node_lock); + spin_unlock_irq(&tpg->acl_node_lock); return 0; } @@ -725,20 +725,20 @@ int core_tpg_deregister(struct se_portal_group *se_tpg) * not been released because of TFO->tpg_check_demo_mode_cache() == 1 * in transport_deregister_session(). */ - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); list_for_each_entry_safe(nacl, nacl_tmp, &se_tpg->acl_node_list, acl_list) { list_del(&nacl->acl_list); se_tpg->num_node_acls--; - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); core_tpg_wait_for_nacl_pr_ref(nacl); core_free_device_list_for_node(nacl, se_tpg); se_tpg->se_tpg_tfo->tpg_release_fabric_acl(se_tpg, nacl); - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) core_tpg_release_virtual_lun0(se_tpg); diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 520a8baae79..b15879d43e2 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -256,7 +256,7 @@ struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata) struct se_portal_group *se_tpg = &tpg->se_tpg; struct se_node_acl *se_acl; - spin_lock_bh(&se_tpg->acl_node_lock); + spin_lock_irq(&se_tpg->acl_node_lock); list_for_each_entry(se_acl, &se_tpg->acl_node_list, acl_list) { acl = container_of(se_acl, struct ft_node_acl, se_node_acl); pr_debug("acl %p port_name %llx\n", @@ -270,7 +270,7 @@ struct ft_node_acl *ft_acl_get(struct ft_tpg *tpg, struct fc_rport_priv *rdata) break; } } - spin_unlock_bh(&se_tpg->acl_node_lock); + spin_unlock_irq(&se_tpg->acl_node_lock); return found; } -- cgit v1.2.3-70-g09d2 From 0e69d75ccb2f091757b38d4d6a2ed739e06b615e Mon Sep 17 00:00:00 2001 From: Andrew Bird Date: Tue, 16 Aug 2011 13:57:14 -0600 Subject: USB option driver add PID of Huawei Vodafone K3806 This patch adds the product ID of Huawei's Vodafone K3806 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: Andrew Bird Signed-off-by: Alex Chiang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 81565619891..6e042229e4b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -148,6 +148,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K4505 0x1464 #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_K3806 0x14AE #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -551,6 +552,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, -- cgit v1.2.3-70-g09d2 From 7e1805844da18a37e6d251d286f93c94b52d791e Mon Sep 17 00:00:00 2001 From: Andrew Bird Date: Tue, 16 Aug 2011 13:58:21 -0600 Subject: USB option driver add PID of Huawei Vodafone K4605 This patch adds the product ID of Huawei's Vodafone K4605 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by suitable network driver. Signed-off-by: Andrew Bird Signed-off-by: Alex Chiang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e042229e4b..ab86e0dd7f3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -149,6 +149,7 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC #define HUAWEI_PRODUCT_K3806 0x14AE +#define HUAWEI_PRODUCT_K4605 0x14C6 #define HUAWEI_PRODUCT_K3770 0x14C9 #define HUAWEI_PRODUCT_K3771 0x14CA #define HUAWEI_PRODUCT_K4510 0x14CB @@ -553,6 +554,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) }, @@ -1136,10 +1138,11 @@ static int option_probe(struct usb_serial *serial, serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff) return -ENODEV; - /* Don't bind network interfaces on Huawei K3765 & K4505 */ + /* Don't bind network interfaces on Huawei K3765, K4505 & K4605 */ if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID && (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || - serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) && + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 || + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) && serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) return -ENODEV; -- cgit v1.2.3-70-g09d2 From d0f2fb2500b1c5fe4967eb45d8c9bc758d7aef80 Mon Sep 17 00:00:00 2001 From: Wang Zhi Date: Wed, 17 Aug 2011 10:39:31 +0800 Subject: USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming in ehci_bus_resume(). From EHCI Spec p.28 HC should clear PORT_SUSPEND when SW clears PORT_RESUME. In Intel Oaktrail platform, MPH (Multi-Port Host Controller) core clears PORT_SUSPEND directly when SW sets PORT_RESUME bit. If we rely on PORT_SUSPEND bit to stop USB resume, we will miss the action of clearing PORT_RESUME. This will cause unexpected long resume signal on USB bus. Signed-off-by: Wang Zhi Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e051b30c184..4c32cb19b40 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -343,7 +343,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) u32 temp; u32 power_okay; int i; - u8 resume_needed = 0; + unsigned long resume_needed = 0; if (time_before (jiffies, ehci->next_statechange)) msleep(5); @@ -416,7 +416,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) if (test_bit(i, &ehci->bus_suspended) && (temp & PORT_SUSPEND)) { temp |= PORT_RESUME; - resume_needed = 1; + set_bit(i, &resume_needed); } ehci_writel(ehci, temp, &ehci->regs->port_status [i]); } @@ -431,8 +431,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); - if (test_bit(i, &ehci->bus_suspended) && - (temp & PORT_SUSPEND)) { + if (test_bit(i, &resume_needed)) { temp &= ~(PORT_RWC_BITS | PORT_RESUME); ehci_writel(ehci, temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); -- cgit v1.2.3-70-g09d2 From e5d3d4463fb30998385f9e78ab3c7f63b5813000 Mon Sep 17 00:00:00 2001 From: Yulgon Kim Date: Thu, 18 Aug 2011 14:02:45 +0900 Subject: usb: s5p-ehci: fix a NULL pointer deference This patch fixes a NULL pointer deference. A NULL pointer dereference happens since s5p_ehci->hcd field is not initialized yet in probe function. [jg1.han@samsung.com: edit commit message] Signed-off-by: Yulgon Kim Signed-off-by: Jingoo Han Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-s5p.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index b3958b3d316..9e77f1c8bdb 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -86,6 +86,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) goto fail_hcd; } + s5p_ehci->hcd = hcd; s5p_ehci->clk = clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { -- cgit v1.2.3-70-g09d2 From c6eb2d75ffcdfafa37ff010bf467de20d468ef79 Mon Sep 17 00:00:00 2001 From: "Gavin.zhu" Date: Mon, 22 Aug 2011 13:51:53 -0700 Subject: USB: option: add YUGA device id to driver Signed-off-by: Gavin.zhu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 92 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ab86e0dd7f3..78452baca88 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -418,6 +418,56 @@ static void option_instat_callback(struct urb *urb); #define SAMSUNG_VENDOR_ID 0x04e8 #define SAMSUNG_PRODUCT_GT_B3730 0x6889 +/* YUGA products www.yuga-info.com*/ +#define YUGA_VENDOR_ID 0x257A +#define YUGA_PRODUCT_CEM600 0x1601 +#define YUGA_PRODUCT_CEM610 0x1602 +#define YUGA_PRODUCT_CEM500 0x1603 +#define YUGA_PRODUCT_CEM510 0x1604 +#define YUGA_PRODUCT_CEM800 0x1605 +#define YUGA_PRODUCT_CEM900 0x1606 + +#define YUGA_PRODUCT_CEU818 0x1607 +#define YUGA_PRODUCT_CEU816 0x1608 +#define YUGA_PRODUCT_CEU828 0x1609 +#define YUGA_PRODUCT_CEU826 0x160A +#define YUGA_PRODUCT_CEU518 0x160B +#define YUGA_PRODUCT_CEU516 0x160C +#define YUGA_PRODUCT_CEU528 0x160D +#define YUGA_PRODUCT_CEU526 0x160F + +#define YUGA_PRODUCT_CWM600 0x2601 +#define YUGA_PRODUCT_CWM610 0x2602 +#define YUGA_PRODUCT_CWM500 0x2603 +#define YUGA_PRODUCT_CWM510 0x2604 +#define YUGA_PRODUCT_CWM800 0x2605 +#define YUGA_PRODUCT_CWM900 0x2606 + +#define YUGA_PRODUCT_CWU718 0x2607 +#define YUGA_PRODUCT_CWU716 0x2608 +#define YUGA_PRODUCT_CWU728 0x2609 +#define YUGA_PRODUCT_CWU726 0x260A +#define YUGA_PRODUCT_CWU518 0x260B +#define YUGA_PRODUCT_CWU516 0x260C +#define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU526 0x260F + +#define YUGA_PRODUCT_CLM600 0x2601 +#define YUGA_PRODUCT_CLM610 0x2602 +#define YUGA_PRODUCT_CLM500 0x2603 +#define YUGA_PRODUCT_CLM510 0x2604 +#define YUGA_PRODUCT_CLM800 0x2605 +#define YUGA_PRODUCT_CLM900 0x2606 + +#define YUGA_PRODUCT_CLU718 0x2607 +#define YUGA_PRODUCT_CLU716 0x2608 +#define YUGA_PRODUCT_CLU728 0x2609 +#define YUGA_PRODUCT_CLU726 0x260A +#define YUGA_PRODUCT_CLU518 0x260B +#define YUGA_PRODUCT_CLU516 0x260C +#define YUGA_PRODUCT_CLU528 0x260D +#define YUGA_PRODUCT_CLU526 0x260F + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1009,6 +1059,48 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3-70-g09d2 From 6118514e8749105334f46ccec6faf9a439be6cf9 Mon Sep 17 00:00:00 2001 From: Andrew Bird Date: Wed, 17 Aug 2011 00:20:03 +0100 Subject: USB option driver K3765/K4505 avoid CDC_DATA interface Currently the Option driver avoids binding interface 1 on Huawei K3765 and K4505 broadband modems as it should be handled by the cdc_ether driver instead. This patch ensures we don't bind the interface 2 on those devices as that is CDC_DATA. Signed-off-by: Andrew Bird Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 78452baca88..fe22e90bc87 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1235,7 +1235,8 @@ static int option_probe(struct usb_serial *serial, (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505 || serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4605) && - serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) + (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 || + serial->interface->cur_altsetting->desc.bInterfaceNumber == 2)) return -ENODEV; /* Don't bind network interface on Samsung GT-B3730, it is handled by a separate module */ -- cgit v1.2.3-70-g09d2 From 858a914324c7786f483661e3a89bc8fbe50f1b9d Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 16 Aug 2011 08:15:26 -0700 Subject: hwmon: (ntc_thermistor) Simplify if sequence Replace unnecessary if with else statement. This fixes the following (false) compile warning reported with some combinations of C compiler version and configuration. drivers/hwmon/ntc_thermistor.c: In function 'ntc_show_temp': drivers/hwmon/ntc_thermistor.c:225: warning: 'low' may be used uninitialized in this function drivers/hwmon/ntc_thermistor.c:225: note: 'low' was declared here drivers/hwmon/ntc_thermistor.c:225: warning: 'high' may be used uninitialized in this function drivers/hwmon/ntc_thermistor.c:225: note: 'high' was declared here drivers/hwmon/ntc_thermistor.c:294: warning: 'temp' may be used uninitialized in this function Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/ntc_thermistor.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c index d7926f4336b..eab11615dce 100644 --- a/drivers/hwmon/ntc_thermistor.c +++ b/drivers/hwmon/ntc_thermistor.c @@ -211,8 +211,7 @@ static int lookup_comp(struct ntc_data *data, if (data->comp[mid].ohm <= ohm) { *i_low = mid; *i_high = mid - 1; - } - if (data->comp[mid].ohm > ohm) { + } else { *i_low = mid + 1; *i_high = mid; } -- cgit v1.2.3-70-g09d2 From 8ea95e08711f504d83281e762ca65a849a89593e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 2 Aug 2011 10:08:34 +0200 Subject: pti: add missing CONFIG_PCI dependency allmodconfig compile fails on s390 because of the new PTI driver: drivers/misc/pti.c:407:3: error: implicit declaration of function 'pci_iounmap' drivers/misc/pti.c:410:3: error: implicit declaration of function 'pci_release_region' Add a 'depends on PCI' statement so it doesn't get compiled. Cc: J Freyensee Signed-off-by: Tracey Dent Acked-by: Randy Dunlap Signed-off-by: Sergei Trofimovich Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0a4d86c6c4a..2d6423c2d19 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -146,6 +146,7 @@ config PHANTOM config INTEL_MID_PTI tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" + depends on PCI default n help The PTI (Parallel Trace Interface) driver directs -- cgit v1.2.3-70-g09d2 From 86ec67fd0a28c7f2b765e33aaf5b002d28c5f1fa Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Fri, 12 Aug 2011 14:58:31 -0700 Subject: base/devres.c: quiet sparse noise about context imbalance devres_release_all and devres_release_group both aquire the lock &dev->devres_lock but the release of that lock is done in release_nodes. This results in sparse noise about context imbalance. Add a lock annotation to release_nodes to quiet this noise. Signed-off-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/base/devres.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/base/devres.c b/drivers/base/devres.c index cf7a0c78805..65cd7483245 100644 --- a/drivers/base/devres.c +++ b/drivers/base/devres.c @@ -397,6 +397,7 @@ static int remove_nodes(struct device *dev, static int release_nodes(struct device *dev, struct list_head *first, struct list_head *end, unsigned long flags) + __releases(&dev->devres_lock) { LIST_HEAD(todo); int cnt; -- cgit v1.2.3-70-g09d2 From 5926cef26c72cd121266b000b8975e6373cbf2b3 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:30 -0500 Subject: drivers:misc: ti-st: avoid a misleading dbg msg Previously the private data of each protocol registered to use ST was used to determine whether the protocol was registered to use shared transport or otherwise. However, now a flag is_registered is maintained to identify whether a protocol intends to use ST. Upon closing of the UART the error message relevant to this lack of un-registration was misleading and this patch fixes that. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 54c91ffe4a9..c8e335db345 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -717,7 +717,7 @@ static void st_tty_close(struct tty_struct *tty) */ spin_lock_irqsave(&st_gdata->lock, flags); for (i = ST_BT; i < ST_MAX_CHANNELS; i++) { - if (st_gdata->list[i] != NULL) + if (st_gdata->is_registered[i] == true) pr_err("%d not un-registered", i); st_gdata->list[i] = NULL; } -- cgit v1.2.3-70-g09d2 From 0d7c5f2572ccfa7bf83292b1506926663f2d164a Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:31 -0500 Subject: drivers:misc:ti-st: platform hooks for chip states Certain platform specific or Host-WiLink Interface specific actions would be required to be taken when the chip is being enabled and after the chip is disabled such as configuration of the mux modes for the GPIO of host connected to the nshutdown of the chip or relinquishing UART after the chip is disabled. Similar actions can also be taken when the chip is in deep sleep or when the chip is awake. Performance enhancements such as configuring the host to run faster when chip is awake and slower when chip is asleep can also be made here. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 12 ++++++++++++ drivers/misc/ti-st/st_ll.c | 19 +++++++++++++++++++ include/linux/ti_wilink_st.h | 27 ++++++++++++++++++++++++++- 3 files changed, 57 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 38fd2f04c07..6884dd1c997 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -434,11 +434,17 @@ long st_kim_start(void *kim_data) { long err = 0; long retry = POR_RETRY_COUNT; + struct ti_st_plat_data *pdata; struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; pr_info(" %s", __func__); + pdata = kim_gdata->kim_pdev->dev.platform_data; do { + /* platform specific enabling code here */ + if (pdata->chip_enable) + pdata->chip_enable(kim_gdata); + /* Configure BT nShutdown to HIGH state */ gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); mdelay(5); /* FIXME: a proper toggle */ @@ -489,6 +495,8 @@ long st_kim_stop(void *kim_data) { long err = 0; struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; + struct ti_st_plat_data *pdata = + kim_gdata->kim_pdev->dev.platform_data; INIT_COMPLETION(kim_gdata->ldisc_installed); @@ -515,6 +523,10 @@ long st_kim_stop(void *kim_data) gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH); mdelay(1); gpio_set_value(kim_gdata->nshutdown, GPIO_LOW); + + /* platform specific disable */ + if (pdata->chip_disable) + pdata->chip_disable(kim_gdata); return err; } diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c index 3f249513885..1ff460a8e9c 100644 --- a/drivers/misc/ti-st/st_ll.c +++ b/drivers/misc/ti-st/st_ll.c @@ -22,6 +22,7 @@ #define pr_fmt(fmt) "(stll) :" fmt #include #include +#include #include /**********************************************************************/ @@ -37,6 +38,9 @@ static void send_ll_cmd(struct st_data_s *st_data, static void ll_device_want_to_sleep(struct st_data_s *st_data) { + struct kim_data_s *kim_data; + struct ti_st_plat_data *pdata; + pr_debug("%s", __func__); /* sanity check */ if (st_data->ll_state != ST_LL_AWAKE) @@ -46,10 +50,19 @@ static void ll_device_want_to_sleep(struct st_data_s *st_data) send_ll_cmd(st_data, LL_SLEEP_ACK); /* update state */ st_data->ll_state = ST_LL_ASLEEP; + + /* communicate to platform about chip asleep */ + kim_data = st_data->kim_data; + pdata = kim_data->kim_pdev->dev.platform_data; + if (pdata->chip_asleep) + pdata->chip_asleep(NULL); } static void ll_device_want_to_wakeup(struct st_data_s *st_data) { + struct kim_data_s *kim_data; + struct ti_st_plat_data *pdata; + /* diff actions in diff states */ switch (st_data->ll_state) { case ST_LL_ASLEEP: @@ -70,6 +83,12 @@ static void ll_device_want_to_wakeup(struct st_data_s *st_data) } /* update state */ st_data->ll_state = ST_LL_AWAKE; + + /* communicate to platform about chip wakeup */ + kim_data = st_data->kim_data; + pdata = kim_data->kim_pdev->dev.platform_data; + if (pdata->chip_asleep) + pdata->chip_awake(NULL); } /**********************************************************************/ diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index b004e557caa..2ef4385da6b 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -410,7 +410,28 @@ struct gps_event_hdr { u16 plen; } __attribute__ ((packed)); -/* platform data */ +/** + * struct ti_st_plat_data - platform data shared between ST driver and + * platform specific board file which adds the ST device. + * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected. + * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1) + * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM + * purposes. + * @baud_rate: The baud rate supported by the Host UART controller, this will + * be shared across with the chip via a HCI VS command from User-Space Init + * Mgr application. + * @suspend: + * @resume: legacy PM routines hooked to platform specific board file, so as + * to take chip-host interface specific action. + * @chip_enable: + * @chip_disable: Platform/Interface specific mux mode setting, GPIO + * configuring, Host side PM disabling etc.. can be done here. + * @chip_asleep: + * @chip_awake: Chip specific deep sleep states is communicated to Host + * specific board-xx.c to take actions such as cut UART clocks when chip + * asleep or run host faster when chip awake etc.. + * + */ struct ti_st_plat_data { long nshutdown_gpio; unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */ @@ -418,6 +439,10 @@ struct ti_st_plat_data { unsigned long baud_rate; int (*suspend)(struct platform_device *, pm_message_t); int (*resume)(struct platform_device *); + int (*chip_enable) (struct kim_data_s *); + int (*chip_disable) (struct kim_data_s *); + int (*chip_asleep) (struct kim_data_s *); + int (*chip_awake) (struct kim_data_s *); }; #endif /* TI_WILINK_ST_H */ -- cgit v1.2.3-70-g09d2 From 74a4fcf19eed6550651f455db5741fd216b4f004 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:32 -0500 Subject: drivers:misc: ti-st: reinit completion on ver read After the version information has been read, the completion which assists in wait_for_completion during the firmware send/wait sequence is being re-used and hence this needs to be re-initialised for fool proof firmware download retries. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 6884dd1c997..e5639ca97dc 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -210,6 +210,7 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name) pr_err(" waiting for ver info- timed out "); return -ETIMEDOUT; } + INIT_COMPLETION(kim_gdata->kim_rcvd); version = MAKEWORD(kim_gdata->resp_buffer[13], -- cgit v1.2.3-70-g09d2 From 78bb9697e2c4b62c426f1a2571c293a2e4463adf Mon Sep 17 00:00:00 2001 From: Vijay Badawadagi Date: Wed, 10 Aug 2011 10:18:33 -0500 Subject: drivers:misc: ti-st: fail-safe on wrong pkt type Texas Instrument's shared transport driver interpret incoming data from the UART based on the various protocol drivers registered to the driver such as btwilink driver or FM or GPS driver which provide logical channel IDs. In case of bad-behavior from chip such as HCI Event response for a GPS command or a HCI Event (h/w error event) for a FM response & In case of bad-behavior from UART driver such as dropping data bytes a fail-safe is required to avoid kernel panic. Signed-off-by: Pavan Savoy Signed-off-by: Vijay Badawadagi Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_core.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index c8e335db345..1f973ce3043 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -338,6 +338,12 @@ void st_int_recv(void *disc_data, /* Unknow packet? */ default: type = *ptr; + if (st_gdata->list[type] == NULL) { + pr_err("chip/interface misbehavior dropping" + " frame starting with 0x%02x", type); + goto done; + + } st_gdata->rx_skb = alloc_skb( st_gdata->list[type]->max_frame_size, GFP_ATOMIC); @@ -354,6 +360,7 @@ void st_int_recv(void *disc_data, ptr++; count--; } +done: spin_unlock_irqrestore(&st_gdata->lock, flags); pr_debug("done %s", __func__); return; -- cgit v1.2.3-70-g09d2 From 2f81a02ce0693863019dc3fcc532533af6dc0dcd Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:34 -0500 Subject: drivers:misc: ti-st: reinit completion before send download firmware behaves differently at different times, when logs are enabled and the system is loaded, the wait_for_completion is able to wait for every send, However during other times the wait does not happen. So, for reliability reinitializing the completion before every send, makes sure the wait happens for every send. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index e5639ca97dc..1748a9351de 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -299,6 +299,7 @@ static long download_firmware(struct kim_data_s *kim_gdata) switch (((struct bts_action *)ptr)->type) { case ACTION_SEND_COMMAND: /* action send */ + pr_debug("S"); action_ptr = &(((struct bts_action *)ptr)->data[0]); if (unlikely (((struct hci_command *)action_ptr)->opcode == @@ -336,6 +337,10 @@ static long download_firmware(struct kim_data_s *kim_gdata) release_firmware(kim_gdata->fw_entry); return -ETIMEDOUT; } + /* reinit completion before sending for the + * relevant wait + */ + INIT_COMPLETION(kim_gdata->kim_rcvd); /* * Free space found in uart buffer, call st_int_write @@ -362,6 +367,7 @@ static long download_firmware(struct kim_data_s *kim_gdata) } break; case ACTION_WAIT_EVENT: /* wait */ + pr_debug("W"); if (!wait_for_completion_timeout (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) { -- cgit v1.2.3-70-g09d2 From d0344ef670d686628f369e649c86f71c90ebe222 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:35 -0500 Subject: drivers:misc: ti-st: wait for completion at fail When the line discipline install fails for reasons such as missing user-space UIM or broken communication between UIM and ST driver, then the ST attempts/retries to request for ldisc installation again. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 1748a9351de..d8ca4068a92 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -473,6 +473,12 @@ long st_kim_start(void *kim_data) pr_info("ldisc_install = 0"); sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install"); + /* the following wait is never going to be completed, + * since the ldisc was never installed, hence serving + * as a mdelay of LDISC_TIME msecs */ + err = wait_for_completion_timeout + (&kim_gdata->ldisc_installed, + msecs_to_jiffies(LDISC_TIME)); err = -ETIMEDOUT; continue; } else { @@ -485,6 +491,13 @@ long st_kim_start(void *kim_data) pr_info("ldisc_install = 0"); sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install"); + /* this wait might be completed, though in the + * tty_close() since the ldisc is already + * installed */ + err = wait_for_completion_timeout + (&kim_gdata->ldisc_installed, + msecs_to_jiffies(LDISC_TIME)); + err = -EINVAL; continue; } else { /* on success don't retry */ break; -- cgit v1.2.3-70-g09d2 From 76ff0e64d42fac59fb756536342a3d3f3e4e8833 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:36 -0500 Subject: drivers:misc: ti-st: free skb on firmware download If during validation of the firmware download the data doesn't match what is expected out of the chip, this calls for a firmware download failure and a retry. Free the SKB which collects response during such scenarios. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index d8ca4068a92..3a3580566df 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -68,6 +68,7 @@ void validate_firmware_response(struct kim_data_s *kim_gdata) if (unlikely(skb->data[5] != 0)) { pr_err("no proper response during fw download"); pr_err("data6 %x", skb->data[5]); + kfree_skb(skb); return; /* keep waiting for the proper response */ } /* becos of all the script being downloaded */ -- cgit v1.2.3-70-g09d2 From 651d62a8b0378b911f083a1712d9d228894f46d8 Mon Sep 17 00:00:00 2001 From: Pavan Savoy Date: Wed, 10 Aug 2011 10:18:37 -0500 Subject: drivers:misc: ti-st: fix unexpected UART close If suppose the UIM were to die and hence UART were to close when the Bluetooth/FM or GPS is turned on, prep the ST for a state where-in if the UIM comes back up, Bluetooth/FM/GPS can be turned on. Signed-off-by: Pavan Savoy Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 1f973ce3043..ba168a7d54d 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -727,6 +727,7 @@ static void st_tty_close(struct tty_struct *tty) if (st_gdata->is_registered[i] == true) pr_err("%d not un-registered", i); st_gdata->list[i] = NULL; + st_gdata->is_registered[i] = false; } st_gdata->protos_registered = 0; spin_unlock_irqrestore(&st_gdata->lock, flags); -- cgit v1.2.3-70-g09d2 From 6c4b47d243112e98811ce0da7bbb32cc3857dd1a Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 20 Jul 2011 20:17:49 +0900 Subject: pch_uart: Set PCIe bus number using probe parameter Currently, PCIe bus number is set as fixed value "2". However, PCIe bus number is not always "2". This patch sets bus number using probe() parameter. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 846dfcd3ce0..b46218d679e 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev + dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number, + PCI_DEVFN(0xa, 0)); /* Get DMA's dev information */ /* Set Tx DMA */ param = &priv->param_tx; -- cgit v1.2.3-70-g09d2 From 181d5762bd8eaa2881b7df27bad260bf4abda1bc Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 4 Aug 2011 03:13:10 -0500 Subject: drivers/serial/ucc_uart.c: Fix compiler warning drivers/tty/serial/ucc_uart.c: In function 'qe2cpu_addr': drivers/tty/serial/ucc_uart.c:238:2: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Kumar Gala Acked-by: Timur Tabi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/ucc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index c327218cad4..9af9f0879a2 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __func__, addr); + printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr); BUG(); return NULL; } -- cgit v1.2.3-70-g09d2 From ab8ba3a2d2cba6a658ef596cd5b2e0905b6c8a9f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 16 Aug 2011 12:02:28 -0600 Subject: serial: 8250_pnp: add Intermec CV60 touchscreen device It would have been nice if Intermec had supplied a PNP0501 _CID for the COM3 device, but they didn't, so we have to recognize it explicitly. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=40612 CC: Jeff Chua Signed-off-by: Bjorn Helgaas Cc: stable Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pnp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c index fc301f6722e..a2f236510ff 100644 --- a/drivers/tty/serial/8250_pnp.c +++ b/drivers/tty/serial/8250_pnp.c @@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = { /* IBM */ /* IBM Thinkpad 701 Internal Modem Voice */ { "IBM0033", 0 }, + /* Intermec */ + /* Intermec CV60 touchscreen port */ + { "PNP4972", 0 }, /* Intertex */ /* Intertex 28k8 33k6 Voice EXT PnP */ { "IXDC801", 0 }, -- cgit v1.2.3-70-g09d2 From 0d0a3cc183c50956fe1d9e37cca520debea93ad5 Mon Sep 17 00:00:00 2001 From: "Voss, Nikolaus" Date: Wed, 10 Aug 2011 14:02:29 +0200 Subject: atmel_serial: fix atmel_default_console_device reflect new static uart platform ids introduced by patch http://article.gmane.org/gmane.linux.kernel/1126105 Signed-off-by: Nikolaus Voss Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index af9b7814965..b922f5d2e61 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1609,9 +1609,11 @@ static struct console atmel_console = { static int __init atmel_console_init(void) { if (atmel_default_console_device) { - add_preferred_console(ATMEL_DEVICENAME, - atmel_default_console_device->id, NULL); - atmel_init_port(&atmel_ports[atmel_default_console_device->id], + struct atmel_uart_data *pdata = + atmel_default_console_device->dev.platform_data; + + add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL); + atmel_init_port(&atmel_ports[pdata->num], atmel_default_console_device); register_console(&atmel_console); } -- cgit v1.2.3-70-g09d2 From a2cc797d2d1a116b607de353de0ae1c2cab80b74 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Mon, 22 Aug 2011 12:39:10 -0700 Subject: i915: do not setup intel_backlight twice The commit "Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support" adds calls to intel_panel_setup_backlight() from intel_{lvds,dp}_init so do not call it again from intel_setup_outputs(). BugLink: http://bugs.launchpad.net/bugs/831542 Signed-off-by: Kamal Mostafa ACKed-by: Matthew Garrett Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ee1d701317f..5a1ae9f06cb 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7238,8 +7238,6 @@ static void intel_setup_outputs(struct drm_device *dev) intel_encoder_clones(dev, encoder->clone_mask); } - intel_panel_setup_backlight(dev); - /* disable all the possible outputs/crtcs before entering KMS mode */ drm_helper_disable_unused_functions(dev); } -- cgit v1.2.3-70-g09d2 From 0278ccd9d53e07c4e699432b2fed9de6c56f506c Mon Sep 17 00:00:00 2001 From: Chris Boot Date: Mon, 22 Aug 2011 21:38:38 +0100 Subject: firewire: sbp2: fix panic after rmmod with slow targets If firewire-sbp2 starts a login to a target that doesn't complete ORBs in a timely manner (and has to retry the login), and the module is removed before the operation times out, you end up with a null-pointer dereference and a kernel panic. [SR: This happens because sbp2_target_get/put() do not maintain module references. scsi_device_get/put() do, but at occasions like Chris describes one, nobody holds a reference to an SBP-2 sdev.] This patch cancels pending work for each unit in sbp2_remove(), which hopefully means there are no extra references around that prevent us from unloading. This fixes my crash. Signed-off-by: Chris Boot Signed-off-by: Stefan Richter --- drivers/firewire/sbp2.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index 41841a3e3f9..17cef864506 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1198,6 +1198,10 @@ static int sbp2_remove(struct device *dev) { struct fw_unit *unit = fw_unit(dev); struct sbp2_target *tgt = dev_get_drvdata(&unit->device); + struct sbp2_logical_unit *lu; + + list_for_each_entry(lu, &tgt->lu_list, link) + cancel_delayed_work_sync(&lu->work); sbp2_target_put(tgt); return 0; -- cgit v1.2.3-70-g09d2 From f5e4282586dc0c9dab8c7d32e6c43aa07f68586b Mon Sep 17 00:00:00 2001 From: Jeremiah Matthey Date: Tue, 23 Aug 2011 09:44:30 +0200 Subject: HID: usbhid: Add support for SiGma Micro chip Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks. These keyboards dont seem to allow the records to be initialized, and hence a timeout occurs when the usbhid driver attempts to initialize them. The patch just adds the signature for these keyboards to the hid-quirks list with the setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the timeout to occur. Signed-off-by: Jeremiah Matthey Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 61c880939f5..7d27d2b0445 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -579,6 +579,9 @@ #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 #define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600 +#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f +#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002 + #define USB_VENDOR_ID_SKYCABLE 0x1223 #define USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER 0x3F07 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 621959d5cc4..4bdb5d46c52 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -89,6 +89,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS }, { 0, 0 } }; -- cgit v1.2.3-70-g09d2 From 7c4c3960dff109bc5db4c35da481c212dadb5eb5 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 22 Aug 2011 21:17:57 +0000 Subject: drm/ttm: fix ttm_bo_add_ttm(user) failure path ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 56619f64b6b..384116afe5b 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -353,8 +353,10 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc) ret = ttm_tt_set_user(bo->ttm, current, bo->buffer_start, bo->num_pages); - if (unlikely(ret != 0)) + if (unlikely(ret != 0)) { ttm_tt_destroy(bo->ttm); + bo->ttm = NULL; + } break; default: printk(KERN_ERR TTM_PFX "Illegal buffer object type\n"); -- cgit v1.2.3-70-g09d2 From eac2095398668f989a3dd8d00be1b87850d78c01 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Aug 2011 03:15:04 +0000 Subject: drm/ttm: unbind ttm before destroying node in accel move cleanup Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo_util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c index 77dbf408c0d..ae3c6f5dd2b 100644 --- a/drivers/gpu/drm/ttm/ttm_bo_util.c +++ b/drivers/gpu/drm/ttm/ttm_bo_util.c @@ -635,13 +635,13 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo, if (ret) return ret; - ttm_bo_free_old_node(bo); if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm != NULL)) { ttm_tt_unbind(bo->ttm); ttm_tt_destroy(bo->ttm); bo->ttm = NULL; } + ttm_bo_free_old_node(bo); } else { /** * This should help pipeline ordinary buffer moves. -- cgit v1.2.3-70-g09d2 From 8d3bb23609d4ae22803a15d232289fc09a7b61c4 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 22 Aug 2011 03:15:05 +0000 Subject: drm/ttm: ensure ttm for new node is bound before calling move_notify() This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/ttm/ttm_bo.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index 384116afe5b..a4d38d85909 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -392,10 +392,12 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, * Create and bind a ttm if required. */ - if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED) && (bo->ttm == NULL)) { - ret = ttm_bo_add_ttm(bo, false); - if (ret) - goto out_err; + if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) { + if (bo->ttm == NULL) { + ret = ttm_bo_add_ttm(bo, false); + if (ret) + goto out_err; + } ret = ttm_tt_set_placement_caching(bo->ttm, mem->placement); if (ret) -- cgit v1.2.3-70-g09d2 From 3989ef6cfb80825af2f7933415797f052817ac3e Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 17 Aug 2011 11:43:20 +0200 Subject: HID: wiimote: Simplify synchronization The new locking scheme in HID core allows us to remove a bit of synchronization. Since the HID layer acts synchronously we simply register input core last and there are no synchonization issues anymore. Also register sysfs files after that to simplify the code. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote.c | 78 ++++++++++++++++------------------------------- 1 file changed, 27 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index a594383ce03..8a68bf515ca 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -10,7 +10,6 @@ * any later version. */ -#include #include #include #include @@ -33,7 +32,6 @@ struct wiimote_state { }; struct wiimote_data { - atomic_t ready; struct hid_device *hdev; struct input_dev *input; @@ -200,9 +198,6 @@ static ssize_t wiifs_led_show_##num(struct device *dev, \ unsigned long flags; \ int state; \ \ - if (!atomic_read(&wdata->ready)) \ - return -EBUSY; \ - \ spin_lock_irqsave(&wdata->state.lock, flags); \ state = !!(wdata->state.flags & WIIPROTO_FLAG_LED##num); \ spin_unlock_irqrestore(&wdata->state.lock, flags); \ @@ -217,9 +212,6 @@ static ssize_t wiifs_led_set_##num(struct device *dev, \ unsigned long flags; \ __u8 state; \ \ - if (!atomic_read(&wdata->ready)) \ - return -EBUSY; \ - \ spin_lock_irqsave(&wdata->state.lock, flags); \ \ state = wdata->state.flags; \ @@ -244,13 +236,6 @@ wiifs_led_show_set(4); static int wiimote_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { - struct wiimote_data *wdata = input_get_drvdata(dev); - - if (!atomic_read(&wdata->ready)) - return -EBUSY; - /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */ - smp_rmb(); - return 0; } @@ -300,11 +285,6 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report, int i; unsigned long flags; - if (!atomic_read(&wdata->ready)) - return -EBUSY; - /* smp_rmb: Make sure wdata->xy is available when wdata->ready is 1 */ - smp_rmb(); - if (size < 1) return -EINVAL; @@ -362,6 +342,15 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) static void wiimote_destroy(struct wiimote_data *wdata) { + device_remove_file(&wdata->hdev->dev, &dev_attr_led1); + device_remove_file(&wdata->hdev->dev, &dev_attr_led2); + device_remove_file(&wdata->hdev->dev, &dev_attr_led3); + device_remove_file(&wdata->hdev->dev, &dev_attr_led4); + + input_unregister_device(wdata->input); + cancel_work_sync(&wdata->worker); + hid_hw_stop(wdata->hdev); + kfree(wdata); } @@ -377,19 +366,6 @@ static int wiimote_hid_probe(struct hid_device *hdev, return -ENOMEM; } - ret = device_create_file(&hdev->dev, &dev_attr_led1); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led2); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led3); - if (ret) - goto err; - ret = device_create_file(&hdev->dev, &dev_attr_led4); - if (ret) - goto err; - ret = hid_parse(hdev); if (ret) { hid_err(hdev, "HID parse failed\n"); @@ -408,9 +384,19 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - /* smp_wmb: Write wdata->xy first before wdata->ready is set to 1 */ - smp_wmb(); - atomic_set(&wdata->ready, 1); + ret = device_create_file(&hdev->dev, &dev_attr_led1); + if (ret) + goto err_free; + ret = device_create_file(&hdev->dev, &dev_attr_led2); + if (ret) + goto err_free; + ret = device_create_file(&hdev->dev, &dev_attr_led3); + if (ret) + goto err_free; + ret = device_create_file(&hdev->dev, &dev_attr_led4); + if (ret) + goto err_free; + hid_info(hdev, "New device registered\n"); /* by default set led1 after device initialization */ @@ -420,15 +406,15 @@ static int wiimote_hid_probe(struct hid_device *hdev, return 0; +err_free: + wiimote_destroy(wdata); + return ret; + err_stop: hid_hw_stop(hdev); err: input_free_device(wdata->input); - device_remove_file(&hdev->dev, &dev_attr_led1); - device_remove_file(&hdev->dev, &dev_attr_led2); - device_remove_file(&hdev->dev, &dev_attr_led3); - device_remove_file(&hdev->dev, &dev_attr_led4); - wiimote_destroy(wdata); + kfree(wdata); return ret; } @@ -437,16 +423,6 @@ static void wiimote_hid_remove(struct hid_device *hdev) struct wiimote_data *wdata = hid_get_drvdata(hdev); hid_info(hdev, "Device removed\n"); - - device_remove_file(&hdev->dev, &dev_attr_led1); - device_remove_file(&hdev->dev, &dev_attr_led2); - device_remove_file(&hdev->dev, &dev_attr_led3); - device_remove_file(&hdev->dev, &dev_attr_led4); - - hid_hw_stop(hdev); - input_unregister_device(wdata->input); - - cancel_work_sync(&wdata->worker); wiimote_destroy(wdata); } -- cgit v1.2.3-70-g09d2 From 26af17484a737aaa991a7ce578cb15809a582fbc Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 17 Aug 2011 11:43:21 +0200 Subject: HID: wiimote: Correctly call HID open/close callbacks Even though the bluetooth hid backend does not react on open/close callbacks, we should call them to be consistent with other hid drivers. Also the new input open/close handlers will be used in future to prepare the wiimote device for IR/extension input. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index 8a68bf515ca..d49f67c7a00 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -239,6 +239,20 @@ static int wiimote_input_event(struct input_dev *dev, unsigned int type, return 0; } +static int wiimote_input_open(struct input_dev *dev) +{ + struct wiimote_data *wdata = input_get_drvdata(dev); + + return hid_hw_open(wdata->hdev); +} + +static void wiimote_input_close(struct input_dev *dev) +{ + struct wiimote_data *wdata = input_get_drvdata(dev); + + hid_hw_close(wdata->hdev); +} + static void handler_keys(struct wiimote_data *wdata, const __u8 *payload) { input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_LEFT], @@ -321,6 +335,8 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) input_set_drvdata(wdata->input, wdata); wdata->input->event = wiimote_input_event; + wdata->input->open = wiimote_input_open; + wdata->input->close = wiimote_input_close; wdata->input->dev.parent = &wdata->hdev->dev; wdata->input->id.bustype = wdata->hdev->bus; wdata->input->id.vendor = wdata->hdev->vendor; -- cgit v1.2.3-70-g09d2 From 23a5a4a39eddbe515a832767a371cc54e82cc25e Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 17 Aug 2011 11:43:22 +0200 Subject: HID: wiimote: Register led class devices This registers 4 led devices to allow controlling the wiimote leds via standard LED sysfs API. It removes the four sysfs attributes so we don't have two APIs for one device. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-wiimote.c | 165 +++++++++++++++++++++++++++++----------------- 2 files changed, 107 insertions(+), 59 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 306b15f39c9..1130a898712 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -589,6 +589,7 @@ config HID_WACOM_POWER_SUPPLY config HID_WIIMOTE tristate "Nintendo Wii Remote support" depends on BT_HIDP + depends on LEDS_CLASS ---help--- Support for the Nintendo Wii Remote bluetooth device. diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index d49f67c7a00..29edd55d4bb 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include "hid-ids.h" @@ -34,6 +35,7 @@ struct wiimote_state { struct wiimote_data { struct hid_device *hdev; struct input_dev *input; + struct led_classdev *leds[4]; spinlock_t qlock; __u8 head; @@ -51,6 +53,9 @@ struct wiimote_data { #define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \ WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4) +/* return flag for led \num */ +#define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1)) + enum wiiproto_reqs { WIIPROTO_REQ_LED = 0x11, WIIPROTO_REQ_DRM_K = 0x30, @@ -85,9 +90,6 @@ static __u16 wiiproto_keymap[] = { BTN_MODE, /* WIIPROTO_KEY_HOME */ }; -#define dev_to_wii(pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \ - dev)) - static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer, size_t count) { @@ -190,48 +192,53 @@ static void wiiproto_req_leds(struct wiimote_data *wdata, int leds) wiimote_queue(wdata, cmd, sizeof(cmd)); } -#define wiifs_led_show_set(num) \ -static ssize_t wiifs_led_show_##num(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct wiimote_data *wdata = dev_to_wii(dev); \ - unsigned long flags; \ - int state; \ - \ - spin_lock_irqsave(&wdata->state.lock, flags); \ - state = !!(wdata->state.flags & WIIPROTO_FLAG_LED##num); \ - spin_unlock_irqrestore(&wdata->state.lock, flags); \ - \ - return sprintf(buf, "%d\n", state); \ -} \ -static ssize_t wiifs_led_set_##num(struct device *dev, \ - struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct wiimote_data *wdata = dev_to_wii(dev); \ - int tmp = simple_strtoul(buf, NULL, 10); \ - unsigned long flags; \ - __u8 state; \ - \ - spin_lock_irqsave(&wdata->state.lock, flags); \ - \ - state = wdata->state.flags; \ - \ - if (tmp) \ - wiiproto_req_leds(wdata, state | WIIPROTO_FLAG_LED##num);\ - else \ - wiiproto_req_leds(wdata, state & ~WIIPROTO_FLAG_LED##num);\ - \ - spin_unlock_irqrestore(&wdata->state.lock, flags); \ - \ - return count; \ -} \ -static DEVICE_ATTR(led##num, S_IRUGO | S_IWUSR, wiifs_led_show_##num, \ - wiifs_led_set_##num) - -wiifs_led_show_set(1); -wiifs_led_show_set(2); -wiifs_led_show_set(3); -wiifs_led_show_set(4); +static enum led_brightness wiimote_leds_get(struct led_classdev *led_dev) +{ + struct wiimote_data *wdata; + struct device *dev = led_dev->dev->parent; + int i; + unsigned long flags; + bool value = false; + + wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) { + spin_lock_irqsave(&wdata->state.lock, flags); + value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1); + spin_unlock_irqrestore(&wdata->state.lock, flags); + break; + } + } + + return value ? LED_FULL : LED_OFF; +} + +static void wiimote_leds_set(struct led_classdev *led_dev, + enum led_brightness value) +{ + struct wiimote_data *wdata; + struct device *dev = led_dev->dev->parent; + int i; + unsigned long flags; + __u8 state, flag; + + wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev)); + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i] == led_dev) { + flag = WIIPROTO_FLAG_LED(i + 1); + spin_lock_irqsave(&wdata->state.lock, flags); + state = wdata->state.flags; + if (value == LED_OFF) + wiiproto_req_leds(wdata, state & ~flag); + else + wiiproto_req_leds(wdata, state | flag); + spin_unlock_irqrestore(&wdata->state.lock, flags); + break; + } + } +} static int wiimote_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) @@ -315,6 +322,58 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report, return 0; } +static void wiimote_leds_destroy(struct wiimote_data *wdata) +{ + int i; + struct led_classdev *led; + + for (i = 0; i < 4; ++i) { + if (wdata->leds[i]) { + led = wdata->leds[i]; + wdata->leds[i] = NULL; + led_classdev_unregister(led); + kfree(led); + } + } +} + +static int wiimote_leds_create(struct wiimote_data *wdata) +{ + int i, ret; + struct device *dev = &wdata->hdev->dev; + size_t namesz = strlen(dev_name(dev)) + 9; + struct led_classdev *led; + char *name; + + for (i = 0; i < 4; ++i) { + led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL); + if (!led) { + ret = -ENOMEM; + goto err; + } + name = (void*)&led[1]; + snprintf(name, namesz, "%s:blue:p%d", dev_name(dev), i); + led->name = name; + led->brightness = 0; + led->max_brightness = 1; + led->brightness_get = wiimote_leds_get; + led->brightness_set = wiimote_leds_set; + + ret = led_classdev_register(dev, led); + if (ret) { + kfree(led); + goto err; + } + wdata->leds[i] = led; + } + + return 0; + +err: + wiimote_leds_destroy(wdata); + return ret; +} + static struct wiimote_data *wiimote_create(struct hid_device *hdev) { struct wiimote_data *wdata; @@ -358,10 +417,7 @@ static struct wiimote_data *wiimote_create(struct hid_device *hdev) static void wiimote_destroy(struct wiimote_data *wdata) { - device_remove_file(&wdata->hdev->dev, &dev_attr_led1); - device_remove_file(&wdata->hdev->dev, &dev_attr_led2); - device_remove_file(&wdata->hdev->dev, &dev_attr_led3); - device_remove_file(&wdata->hdev->dev, &dev_attr_led4); + wiimote_leds_destroy(wdata); input_unregister_device(wdata->input); cancel_work_sync(&wdata->worker); @@ -400,16 +456,7 @@ static int wiimote_hid_probe(struct hid_device *hdev, goto err_stop; } - ret = device_create_file(&hdev->dev, &dev_attr_led1); - if (ret) - goto err_free; - ret = device_create_file(&hdev->dev, &dev_attr_led2); - if (ret) - goto err_free; - ret = device_create_file(&hdev->dev, &dev_attr_led3); - if (ret) - goto err_free; - ret = device_create_file(&hdev->dev, &dev_attr_led4); + ret = wiimote_leds_create(wdata); if (ret) goto err_free; -- cgit v1.2.3-70-g09d2 From 2cb5e4bc530471e9596cd32390bf70c8ada13d9a Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 17 Aug 2011 11:43:23 +0200 Subject: HID: wiimote: Add drm request The wiimote reports data in several data reporting modes (DRM). The DRM request makes the wiimote send data in the requested drm. The DRM mode can be set explicitely or can be chosen by the driver. To let the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This is no valid request and is replaced with an appropriate DRM. Currently, the driver always sets the basic DRM_K mode, but this will be extended when further peripherals like accelerometer and IR are supported. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index 29edd55d4bb..84c9eb9c8e0 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -57,7 +57,9 @@ struct wiimote_data { #define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1)) enum wiiproto_reqs { + WIIPROTO_REQ_NULL = 0x0, WIIPROTO_REQ_LED = 0x11, + WIIPROTO_REQ_DRM = 0x12, WIIPROTO_REQ_DRM_K = 0x30, }; @@ -192,6 +194,30 @@ static void wiiproto_req_leds(struct wiimote_data *wdata, int leds) wiimote_queue(wdata, cmd, sizeof(cmd)); } +/* + * Check what peripherals of the wiimote are currently + * active and select a proper DRM that supports all of + * the requested data inputs. + */ +static __u8 select_drm(struct wiimote_data *wdata) +{ + return WIIPROTO_REQ_DRM_K; +} + +static void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm) +{ + __u8 cmd[3]; + + if (drm == WIIPROTO_REQ_NULL) + drm = select_drm(wdata); + + cmd[0] = WIIPROTO_REQ_DRM; + cmd[1] = 0; + cmd[2] = drm; + + wiimote_queue(wdata, cmd, sizeof(cmd)); +} + static enum led_brightness wiimote_leds_get(struct led_classdev *led_dev) { struct wiimote_data *wdata; -- cgit v1.2.3-70-g09d2 From c87019e41d61f3f972bd2f6a2380fc9896e4ab74 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 17 Aug 2011 11:43:24 +0200 Subject: HID: wiimote: Add status and return request handlers The wiimote resets the current drm when an extension is plugged in. Fortunately, it also sends a status report in this situation so we just reset the drm on every status report to keep the drm consistent. Also handle return reports from the wiimote which indicate success and failure of requests that we've sent. Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote.c b/drivers/hid/hid-wiimote.c index 84c9eb9c8e0..85a02e5f9fe 100644 --- a/drivers/hid/hid-wiimote.c +++ b/drivers/hid/hid-wiimote.c @@ -60,6 +60,8 @@ enum wiiproto_reqs { WIIPROTO_REQ_NULL = 0x0, WIIPROTO_REQ_LED = 0x11, WIIPROTO_REQ_DRM = 0x12, + WIIPROTO_REQ_STATUS = 0x20, + WIIPROTO_REQ_RETURN = 0x22, WIIPROTO_REQ_DRM_K = 0x30, }; @@ -313,6 +315,26 @@ static void handler_keys(struct wiimote_data *wdata, const __u8 *payload) input_sync(wdata->input); } +static void handler_status(struct wiimote_data *wdata, const __u8 *payload) +{ + handler_keys(wdata, payload); + + /* on status reports the drm is reset so we need to resend the drm */ + wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); +} + +static void handler_return(struct wiimote_data *wdata, const __u8 *payload) +{ + __u8 err = payload[3]; + __u8 cmd = payload[2]; + + handler_keys(wdata, payload); + + if (err) + hid_warn(wdata->hdev, "Remote error %hhu on req %hhu\n", err, + cmd); +} + struct wiiproto_handler { __u8 id; size_t size; @@ -320,6 +342,8 @@ struct wiiproto_handler { }; static struct wiiproto_handler handlers[] = { + { .id = WIIPROTO_REQ_STATUS, .size = 6, .func = handler_status }, + { .id = WIIPROTO_REQ_RETURN, .size = 4, .func = handler_return }, { .id = WIIPROTO_REQ_DRM_K, .size = 2, .func = handler_keys }, { .id = 0 } }; -- cgit v1.2.3-70-g09d2 From f2b60717e692550bf753a5d64a5b69ea430fc832 Mon Sep 17 00:00:00 2001 From: Thomas Reim Date: Wed, 17 Aug 2011 09:03:32 +0000 Subject: drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim Acked-by: Chris Routh Cc: Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 7f65940f918..4f0c1ecac72 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -466,6 +466,16 @@ static bool radeon_connector_needs_extended_probe(struct radeon_device *dev, (supported_device == ATOM_DEVICE_DFP2_SUPPORT)) return true; } + /* TOSHIBA Satellite L300D with ATI Mobility Radeon x1100 + * (RS690M) sends data to i2c bus for a HDMI connector that + * is not implemented */ + if ((dev->pdev->device == 0x791f) && + (dev->pdev->subsystem_vendor == 0x1179) && + (dev->pdev->subsystem_device == 0xff68)) { + if ((connector_type == DRM_MODE_CONNECTOR_HDMIA) && + (supported_device == ATOM_DEVICE_DFP2_SUPPORT)) + return true; + } /* Default: no EDID header probe required for DDC probing */ return false; -- cgit v1.2.3-70-g09d2 From 8c4074cd2254606aeb788d518ccc27c9f97129e1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 1 Aug 2011 21:20:10 +0800 Subject: tty: Add "spi:" prefix for spi modalias Since commit e0626e38 (spi: prefix modalias with "spi:"), the spi modalias is prefixed with "spi:". This patch adds "spi:" prefix and removes "-spi" suffix in the modalias. Signed-off-by: Axel Lin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/max3107-aava.c | 2 +- drivers/tty/serial/max3107.c | 2 +- drivers/tty/serial/mrst_max3110.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c index a1fe304f2f5..d73aadd7a9a 100644 --- a/drivers/tty/serial/max3107-aava.c +++ b/drivers/tty/serial/max3107-aava.c @@ -340,5 +340,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); +MODULE_ALIAS("spi:aava-max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 750b4f62731..a8164601c0e 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -1209,5 +1209,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi"); +MODULE_ALIAS("spi:max3107"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index a764bf99743..23bc743f2a2 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -917,4 +917,4 @@ module_init(serial_m3110_init); module_exit(serial_m3110_exit); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("max3110-uart"); +MODULE_ALIAS("spi:max3110-uart"); -- cgit v1.2.3-70-g09d2 From 44178176ecc55ad370b837dd2c4b4b8bed1e3823 Mon Sep 17 00:00:00 2001 From: Eric Smith Date: Mon, 11 Jul 2011 22:53:13 -0600 Subject: 8250_pci: add support for Rosewill RC-305 4x serial port card This patch adds support for the Rosewill RC-305 four-port PCI serial card, and probably any other four-port serial cards based on the Moschip MCS9865 chip, assuming that the EEPROM on the card was programmed in accordance with Table 6 of the MCS9865 EEPROM Application Note version 0.3 dated 16-May-2008, available from the Moschip web site (registration required). This patch is based on an earlier patch [1] for the SYBA 6x serial port card by Ira W. Snyder. [1]: http://www.gossamer-threads.com/lists/linux/kernel/1162435 Signed-off-by: Eric Smith Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 6b887d90a20..f652a7b8913 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -4021,13 +4021,17 @@ static struct pci_device_id serial_pci_tbl[] = { 0, 0, pbn_NETMOS9900_2s_115200 }, /* - * Best Connectivity PCI Multi I/O cards + * Best Connectivity and Rosewill PCI Multi I/O cards */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3002, + 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x3004, 0, 0, pbn_b0_bt_4_115200 }, -- cgit v1.2.3-70-g09d2 From dacacc3e794c4c5bab05d97afc19e372e1877943 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Tue, 12 Jul 2011 16:08:49 +0900 Subject: serial/8250_pci: delete duplicate data definition Data definiton "VendorID=10DB, device_id=800D" is already defined. This patch deletes the duplicate definition. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250_pci.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index f652a7b8913..3abeca2a2a1 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = 0x800D, .init = pci_eg20t_init, }, - { - .vendor = 0x10DB, - .device = 0x800D, - .init = pci_eg20t_init, - }, /* * Cronyx Omega PCI (PLX-chip based) */ -- cgit v1.2.3-70-g09d2 From dbb3b1ca5609d1f3848cd387d06cc60aaacf7f98 Mon Sep 17 00:00:00 2001 From: Al Cooper Date: Mon, 25 Jul 2011 16:19:52 -0400 Subject: 8250: Fix race condition in serial8250_backup_timeout(). This is to fix an issue where output will suddenly become very slow. The problem occurs on 8250 UARTS with the hardware bug UART_BUG_THRE. BACKGROUND For normal UARTs (without UART_BUG_THRE): When the serial core layer gets new transmit data and the transmitter is idle, it buffers the data and calls the 8250s' serial8250_start_tx() routine which will simply enable the TX interrupt in the IER register and return. This should immediately fire a THRE interrupt and begin transmitting the data. For buggy UARTs (with UART_BUG_THRE): merely enabling the TX interrupt in IER does not necessarily generate a new THRE interrupt. Therefore, a background timer periodically checks to see if there is pending data, and starts transmission if that is the case. The bug happens on SMP systems when the system has nothing to transmit, the transmit interrupt is disabled and the following sequence occurs: - CPU0: The background timer routine serial8250_backup_timeout() starts and saves the state of the interrupt enable register (IER) and then disables all interrupts in IER. NOTE: The transmit interrupt (TI) bit is saved as disabled. - CPU1: The serial core gets data to transmit, grabs the port lock and calls serial8250_start_tx() which enables the TI in IER. - CPU0: serial8250_backup_timeout() waits for the port lock. - CPU1: finishes (with TI enabled) and releases the port lock. - CPU0: serial8250_backup_timeout() calls the interrupt routine which will transmit the next fifo's worth of data and then restores the IER from the previously saved value (TI disabled). At this point, as long as the serial core has more transmit data buffered, it will not call serial8250_start_tx() again and the background timer routine will slowly transmit the data. The fix is to have serial8250_start_tx() get the port lock before it saves the IER state and release it after restoring IER. This will prevent serial8250_start_tx() from running in parallel. Signed-off-by: Al Cooper Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index f2dfec82faf..7f50999eebc 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data) unsigned int iir, ier = 0, lsr; unsigned long flags; + spin_lock_irqsave(&up->port.lock, flags); + /* * Must disable interrupts or else we risk racing with the interrupt * based handler. @@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data) * the "Diva" UART used on the management processor on many HP * ia64 and parisc boxes. */ - spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && (lsr & UART_LSR_THRE)) { @@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data) } if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); + transmit_chars(up); if (is_real_interrupt(up->port.irq)) serial_out(up, UART_IER, ier); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Standard timer interval plus 0.2s to keep the port running */ mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port) + HZ / 5); -- cgit v1.2.3-70-g09d2 From 24d406a6bf736f7aebdc8fa0f0ec86e0890c6d24 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 10 Aug 2011 14:59:28 +0200 Subject: TTY: pty, fix pty counting tty_operations->remove is normally called like: queue_release_one_tty ->tty_shutdown ->tty_driver_remove_tty ->tty_operations->remove However tty_shutdown() is called from queue_release_one_tty() only if tty_operations->shutdown is NULL. But for pty, it is not. pty_unix98_shutdown() is used there as ->shutdown. So tty_operations->remove of pty (i.e. pty_unix98_remove()) is never called. This results in invalid pty_count. I.e. what can be seen in /proc/sys/kernel/pty/nr. I see this was already reported at: https://lkml.org/lkml/2009/11/5/370 But it was not fixed since then. This patch is kind of a hackish way. The problem lies in ->install. We allocate there another tty (so-called tty->link). So ->install is called once, but ->remove twice, for both tty and tty->link. The fix here is to count both tty and tty->link and divide the count by 2 for user. And to have ->remove called, let's make tty_driver_remove_tty() global and call that from pty_unix98_shutdown() (tty_operations->shutdown). While at it, let's document that when ->shutdown is defined, tty_shutdown() is not called. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: "H. Peter Anvin" Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/pty.c | 17 +++++++++++++++-- drivers/tty/tty_io.c | 3 +-- include/linux/tty.h | 2 ++ include/linux/tty_driver.h | 3 +++ 4 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 98b6e3bdb00..e809e9d4683 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -446,8 +446,19 @@ static inline void legacy_pty_init(void) { } int pty_limit = NR_UNIX98_PTY_DEFAULT; static int pty_limit_min; static int pty_limit_max = NR_UNIX98_PTY_MAX; +static int tty_count; static int pty_count; +static inline void pty_inc_count(void) +{ + pty_count = (++tty_count) / 2; +} + +static inline void pty_dec_count(void) +{ + pty_count = (--tty_count) / 2; +} + static struct cdev ptmx_cdev; static struct ctl_table pty_table[] = { @@ -542,6 +553,7 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, static void pty_unix98_shutdown(struct tty_struct *tty) { + tty_driver_remove_tty(tty->driver, tty); /* We have our own method as we don't use the tty index */ kfree(tty->termios); } @@ -588,7 +600,8 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) */ tty_driver_kref_get(driver); tty->count++; - pty_count++; + pty_inc_count(); /* tty */ + pty_inc_count(); /* tty->link */ return 0; err_free_mem: deinitialize_tty_struct(o_tty); @@ -602,7 +615,7 @@ err_free_tty: static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - pty_count--; + pty_dec_count(); } static const struct tty_operations ptm_unix98_ops = { diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 150e4f747c7..4f1fc81112e 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1295,8 +1295,7 @@ static int tty_driver_install_tty(struct tty_driver *driver, * * Locking: tty_mutex for now */ -static void tty_driver_remove_tty(struct tty_driver *driver, - struct tty_struct *tty) +void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty) { if (driver->ops->remove) driver->ops->remove(driver, tty); diff --git a/include/linux/tty.h b/include/linux/tty.h index 44bc0c5617e..5f2ede82b3d 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -421,6 +421,8 @@ extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws); +extern void tty_driver_remove_tty(struct tty_driver *driver, + struct tty_struct *tty); extern void tty_shutdown(struct tty_struct *tty); extern void tty_free_termios(struct tty_struct *tty); extern int is_current_pgrp_orphaned(void); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 9deeac85524..ecdaeb98b29 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -47,6 +47,9 @@ * * This routine is called synchronously when a particular tty device * is closed for the last time freeing up the resources. + * Note that tty_shutdown() is not called if ops->shutdown is defined. + * This means one is responsible to take care of calling ops->remove (e.g. + * via tty_driver_remove_tty) and releasing tty->termios. * * * void (*cleanup)(struct tty_struct * tty); -- cgit v1.2.3-70-g09d2 From 0055197e984e5fbe6f48f37fc50dd30254915493 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 17 Aug 2011 13:48:15 +0200 Subject: TTY: serial, document ignoring of uart->ops->startup error When a user has SYS_ADMIN capabilities and uart->ops->startup returns an error in uart_startup, we silently drop the error. We then return 0 and behave as if it didn't fail. (Not quite, since we set TTY_IO_ERROR bit and leave ASYNC_INITIALIZED bit cleared.) This all is to allow setserial to work with improperly configured or unconfigured ports. User can thus set port properties and reconfigure properly. This patch only documents this behavior. Signed-off-by: Jiri Slaby Cc: Alan Cox Cc: Russel King Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index db7912cb7ae..a3efbea5dbb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in clear_bit(TTY_IO_ERROR, &tty->flags); } + /* + * This is to allow setserial on this port. People may want to set + * port/irq/type and then reconfigure the port properly if it failed + * now. + */ if (retval && capable(CAP_SYS_ADMIN)) retval = 0; -- cgit v1.2.3-70-g09d2 From b280a97d1caf6fe1d38b51ebb31219391f5ad1a0 Mon Sep 17 00:00:00 2001 From: Nick Pelly Date: Fri, 15 Jul 2011 13:53:08 -0700 Subject: omap-serial: Allow IXON and IXOFF to be disabled. Fixes logic bug that software flow control cannot be disabled, because serial_omap_configure_xonxoff() is not called if both IXON and IXOFF bits are cleared. Signed-off-by: Nick Pelly Acked-by: Govindraj.R Tested-by: Govindraj.R Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index c37df8d0fa2..5e713d3ef1f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_set_mctrl(&up->port, up->port.mctrl); /* Software Flow Control Configuration */ - if (termios->c_iflag & (IXON | IXOFF)) - serial_omap_configure_xonxoff(up, termios); + serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); -- cgit v1.2.3-70-g09d2 From 4b723a471050a8b80f7fa86e76f01f4c711b3443 Mon Sep 17 00:00:00 2001 From: srinidhi kasagar Date: Tue, 9 Aug 2011 20:17:22 +0200 Subject: i2c-nomadik: Do not use _interruptible_ variant call If there is a signal pending and wait_for_completion_interruptible_timeout exited because of the -ERESTARTSYS error we are unable to send any more i2c messages. So, deprecate this _interruptible_ variant call. Signed-off-by: Srinidhi Kasagar Signed-off-by: Linus Walleij Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-nomadik.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index 0c731ca69f1..f9b8854fe0a 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -417,12 +417,12 @@ static int read_i2c(struct nmk_i2c_dev *dev) writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, dev->virtbase + I2C_IMSCR); - timeout = wait_for_completion_interruptible_timeout( + timeout = wait_for_completion_timeout( &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_interruptible_timeout" + "wait_for_completion_timeout" "returned %d waiting for event\n", timeout); status = timeout; } @@ -504,12 +504,12 @@ static int write_i2c(struct nmk_i2c_dev *dev) writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask, dev->virtbase + I2C_IMSCR); - timeout = wait_for_completion_interruptible_timeout( + timeout = wait_for_completion_timeout( &dev->xfer_complete, dev->adap.timeout); if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_interruptible_timeout" + "wait_for_completion_timeout" "returned %d waiting for event\n", timeout); status = timeout; } -- cgit v1.2.3-70-g09d2 From 584b408d37af4e0b38ad5b60f236381bcdf396bc Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 4 Aug 2011 07:53:02 -0700 Subject: Revert "i2c-omap: fix static suspend vs. runtime suspend" This reverts commit adf6e07922255937c8bfeea777d19502b4c9a2be. Remove system PM methods which can race with runtime PM methods. Also, as of v3.1, the PM domain level code for OMAP handles device power state transistions automatically for devices, so drivers no longer need to specifically call the bus/pm_domain methods themselves. Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 29 ----------------------------- 1 file changed, 29 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 1a766cf74f6..2dfb6317685 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1139,41 +1139,12 @@ omap_i2c_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_SUSPEND -static int omap_i2c_suspend(struct device *dev) -{ - if (!pm_runtime_suspended(dev)) - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) - dev->bus->pm->runtime_suspend(dev); - - return 0; -} - -static int omap_i2c_resume(struct device *dev) -{ - if (!pm_runtime_suspended(dev)) - if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume) - dev->bus->pm->runtime_resume(dev); - - return 0; -} - -static struct dev_pm_ops omap_i2c_pm_ops = { - .suspend = omap_i2c_suspend, - .resume = omap_i2c_resume, -}; -#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops) -#else -#define OMAP_I2C_PM_OPS NULL -#endif - static struct platform_driver omap_i2c_driver = { .probe = omap_i2c_probe, .remove = omap_i2c_remove, .driver = { .name = "omap_i2c", .owner = THIS_MODULE, - .pm = OMAP_I2C_PM_OPS, }, }; -- cgit v1.2.3-70-g09d2 From 9818a4775a3ab18b84a689537088b3d72a742130 Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 8 Aug 2011 15:57:45 +0200 Subject: staging: brcm80211: fix compile error on non-x86 archs since 3.0 kernel Since the arrival of kernel version 3.0 in the staging tree it turns out compile error occurs for sparc64, powerpc, and arm platforms. This patch fixes that issue. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Henry Ptasinski Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/brcmsmac/types.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h index bbf21897ae0..823b5e4672e 100644 --- a/drivers/staging/brcm80211/brcmsmac/types.h +++ b/drivers/staging/brcm80211/brcmsmac/types.h @@ -18,6 +18,7 @@ #define _BRCM_TYPES_H_ #include +#include /* Bus types */ #define SI_BUS 0 /* SOC Interconnect */ -- cgit v1.2.3-70-g09d2 From 20cc7995fe66ce6417678bb0db6b3d4955fb1ff6 Mon Sep 17 00:00:00 2001 From: Pieter-Paul Giesberts Date: Mon, 8 Aug 2011 15:59:03 +0200 Subject: staging: brcm80211: SPARC build error fix Due to missing memset function declaration. Reviewed-by: Roland Vossen Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/brcmsmac/otp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/brcm80211/brcmsmac/otp.c b/drivers/staging/brcm80211/brcmsmac/otp.c index 34253cf3781..4a70180eba5 100644 --- a/drivers/staging/brcm80211/brcmsmac/otp.c +++ b/drivers/staging/brcm80211/brcmsmac/otp.c @@ -16,6 +16,7 @@ #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From c5f5c4db393837ebb2ae47bf061d70e498f48f8c Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Wed, 10 Aug 2011 12:56:49 -0500 Subject: staging: zcache: fix crash on high memory swap zcache_put_page() was modified to pass page_address(page) instead of the actual page structure. In combination with the function signature changes to tmem_put() and zcache_pampd_create(), zcache_pampd_create() tries to (re)derive the page structure from the virtual address. However, if the original page is a high memory page (or any unmapped page), this virt_to_page() fails because the page_address() in zcache_put_page() returned NULL. This patch changes zcache_put_page() and zcache_get_page() to pass the page structure instead of the page's virtual address, which may or may not exist. Signed-off-by: Seth Jennings Acked-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/zcache-main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index 855a5bb56a4..a3f5162bfed 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1158,7 +1158,7 @@ static void *zcache_pampd_create(char *data, size_t size, bool raw, int eph, size_t clen; int ret; unsigned long count; - struct page *page = virt_to_page(data); + struct page *page = (struct page *)(data); struct zcache_client *cli = pool->client; uint16_t client_id = get_client_id_from_client(cli); unsigned long zv_mean_zsize; @@ -1227,7 +1227,7 @@ static int zcache_pampd_get_data(char *data, size_t *bufsize, bool raw, int ret = 0; BUG_ON(is_ephemeral(pool)); - zv_decompress(virt_to_page(data), pampd); + zv_decompress((struct page *)(data), pampd); return ret; } @@ -1539,7 +1539,7 @@ static int zcache_put_page(int cli_id, int pool_id, struct tmem_oid *oidp, goto out; if (!zcache_freeze && zcache_do_preload(pool) == 0) { /* preload does preempt_disable on success */ - ret = tmem_put(pool, oidp, index, page_address(page), + ret = tmem_put(pool, oidp, index, (char *)(page), PAGE_SIZE, 0, is_ephemeral(pool)); if (ret < 0) { if (is_ephemeral(pool)) @@ -1572,7 +1572,7 @@ static int zcache_get_page(int cli_id, int pool_id, struct tmem_oid *oidp, pool = zcache_get_pool_by_id(cli_id, pool_id); if (likely(pool != NULL)) { if (atomic_read(&pool->obj_count) > 0) - ret = tmem_get(pool, oidp, index, page_address(page), + ret = tmem_get(pool, oidp, index, (char *)(page), &size, 0, is_ephemeral(pool)); zcache_put_pool(pool); } -- cgit v1.2.3-70-g09d2 From 1dcab0875b113a148b6601d87b4e0e3444440339 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 9 Aug 2011 21:01:33 +0300 Subject: Staging: zcache: signedness bug in tmem_get() "ret" needs to be signed for the error handling to work properly. Signed-off-by: Dan Carpenter Acked-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/tmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/zcache/tmem.c b/drivers/staging/zcache/tmem.c index 975e34bcd72..1ca66ea9b28 100644 --- a/drivers/staging/zcache/tmem.c +++ b/drivers/staging/zcache/tmem.c @@ -604,7 +604,7 @@ int tmem_get(struct tmem_pool *pool, struct tmem_oid *oidp, uint32_t index, struct tmem_obj *obj; void *pampd; bool ephemeral = is_ephemeral(pool); - uint32_t ret = -1; + int ret = -1; struct tmem_hashbucket *hb; bool free = (get_and_free == 1) || ((get_and_free == 0) && ephemeral); bool lock_held = false; -- cgit v1.2.3-70-g09d2 From 048316be72893455f69ad728fa94c26e2e582ba2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 16 Aug 2011 10:10:56 -0700 Subject: staging: octeon-ethernet: Add missing #includes. I looks like something used to implicitly include linux/interrupt.h, and no longer does. Fix the resulting build error by explicitly including it. Signed-off-by: David Daney Cc: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon/ethernet-rgmii.c | 1 + drivers/staging/octeon/ethernet-spi.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index 9c0d2936e48..c3d73f8431a 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -26,6 +26,7 @@ **********************************************************************/ #include #include +#include #include #include #include diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 97082542188..d0e2d514968 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -26,6 +26,7 @@ **********************************************************************/ #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From b4cb0d4da745bc1d806b9b4a27cc4ce1f7adbf99 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 23 Aug 2011 21:04:28 -0700 Subject: hwmon: (i5k_amb) Drop i5k_channel_pci_id Function i5k_channel_pci_id looks like it can fail, while a better code design would make it more obvious that it can't. We can even get rid of the function. Signed-off-by: Jean Delvare Acked-by: Darrick J. Wong Signed-off-by: Guenter Roeck --- drivers/hwmon/i5k_amb.c | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index c4c40be0edb..d22f241b6a6 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -114,7 +114,6 @@ struct i5k_amb_data { void __iomem *amb_mmio; struct i5k_device_attribute *attrs; unsigned int num_attrs; - unsigned long chipset_id; }; static ssize_t show_name(struct device *dev, struct device_attribute *devattr, @@ -444,8 +443,6 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data, goto out; } - data->chipset_id = devid; - res = 0; out: pci_dev_put(pcidev); @@ -478,23 +475,13 @@ out: return res; } -static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data, - unsigned long channel) -{ - switch (data->chipset_id) { - case PCI_DEVICE_ID_INTEL_5000_ERR: - return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel; - case PCI_DEVICE_ID_INTEL_5400_ERR: - return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel; - default: - BUG(); - } -} - -static unsigned long chipset_ids[] = { - PCI_DEVICE_ID_INTEL_5000_ERR, - PCI_DEVICE_ID_INTEL_5400_ERR, - 0 +static struct { + unsigned long err; + unsigned long fbd0; +} chipset_ids[] __devinitdata = { + { PCI_DEVICE_ID_INTEL_5000_ERR, PCI_DEVICE_ID_INTEL_5000_FBD0 }, + { PCI_DEVICE_ID_INTEL_5400_ERR, PCI_DEVICE_ID_INTEL_5400_FBD0 }, + { 0, 0 } }; #ifdef MODULE @@ -510,8 +497,7 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; struct resource *reso; - int i; - int res = -ENODEV; + int i, res; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) @@ -520,22 +506,22 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) /* Figure out where the AMB registers live */ i = 0; do { - res = i5k_find_amb_registers(data, chipset_ids[i]); + res = i5k_find_amb_registers(data, chipset_ids[i].err); + if (res == 0) + break; i++; - } while (res && chipset_ids[i]); + } while (chipset_ids[i].err); if (res) goto err; /* Copy the DIMM presence map for the first two channels */ - res = i5k_channel_probe(&data->amb_present[0], - i5k_channel_pci_id(data, 0)); + res = i5k_channel_probe(&data->amb_present[0], chipset_ids[i].fbd0); if (res) goto err; /* Copy the DIMM presence map for the optional second two channels */ - i5k_channel_probe(&data->amb_present[2], - i5k_channel_pci_id(data, 1)); + i5k_channel_probe(&data->amb_present[2], chipset_ids[i].fbd0 + 1); /* Set up resource regions */ reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); -- cgit v1.2.3-70-g09d2 From ba465d830ed1703713251917f154688ec537580f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 24 Aug 2011 17:15:10 +0200 Subject: [S390] drivers/s390/block/dasd_ioctl.c: add missing kfree Data is only used to temporarily hold information to be copied to the user level, so it should be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // Signed-off-by: Julia Lawall Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_ioctl.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index eb4e034378c..f1a2016829f 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -249,6 +249,7 @@ static int dasd_ioctl_reset_profile(struct dasd_block *block) static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) { struct dasd_profile_info_t *data; + int rc = 0; data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) @@ -279,11 +280,14 @@ static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) spin_unlock_bh(&block->profile.lock); } else { spin_unlock_bh(&block->profile.lock); - return -EIO; + rc = -EIO; + goto out; } if (copy_to_user(argp, data, sizeof(*data))) - return -EFAULT; - return 0; + rc = -EFAULT; +out: + kfree(data); + return rc; } #else static int dasd_ioctl_reset_profile(struct dasd_block *block) -- cgit v1.2.3-70-g09d2 From 8adb4ca344b48bbbf87ca66fd07a2dd503619714 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 24 Aug 2011 17:15:13 +0200 Subject: [S390] memory hotplug: only unassign assigned increments Make sure that only assigned storage increments are unassigned when attaching a storage element. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index be55fb2b1b1..837e010299a 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -383,8 +383,10 @@ static int sclp_attach_storage(u8 id) switch (sccb->header.response_code) { case 0x0020: set_bit(id, sclp_storage_ids); - for (i = 0; i < sccb->assigned; i++) - sclp_unassign_storage(sccb->entries[i] >> 16); + for (i = 0; i < sccb->assigned; i++) { + if (sccb->entries[i]) + sclp_unassign_storage(sccb->entries[i] >> 16); + } break; default: rc = -EIO; -- cgit v1.2.3-70-g09d2 From b7ab83edba2d50583bc9520431618489379718b2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 24 Aug 2011 21:40:56 +0200 Subject: PM: Use spinlock instead of mutex in clock management functions The lock member of struct pm_clk_data is of type struct mutex, which is a problem, because the suspend and resume routines defined in drivers/base/power/clock_ops.c cannot be executed with interrupts disabled for this reason. Modify struct pm_clk_data so that its lock member is a spinlock. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm --- drivers/base/power/clock_ops.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index a846b2f95cf..2c18d584066 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -19,7 +19,7 @@ struct pm_clk_data { struct list_head clock_list; - struct mutex lock; + spinlock_t lock; }; enum pce_status { @@ -73,9 +73,9 @@ int pm_clk_add(struct device *dev, const char *con_id) } } - mutex_lock(&pcd->lock); + spin_lock_irq(&pcd->lock); list_add_tail(&ce->node, &pcd->clock_list); - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); return 0; } @@ -83,8 +83,8 @@ int pm_clk_add(struct device *dev, const char *con_id) * __pm_clk_remove - Destroy PM clock entry. * @ce: PM clock entry to destroy. * - * This routine must be called under the mutex protecting the PM list of clocks - * corresponding the the @ce's device. + * This routine must be called under the spinlock protecting the PM list of + * clocks corresponding the the @ce's device. */ static void __pm_clk_remove(struct pm_clock_entry *ce) { @@ -123,7 +123,7 @@ void pm_clk_remove(struct device *dev, const char *con_id) if (!pcd) return; - mutex_lock(&pcd->lock); + spin_lock_irq(&pcd->lock); list_for_each_entry(ce, &pcd->clock_list, node) { if (!con_id && !ce->con_id) { @@ -137,7 +137,7 @@ void pm_clk_remove(struct device *dev, const char *con_id) } } - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); } /** @@ -158,7 +158,7 @@ int pm_clk_init(struct device *dev) } INIT_LIST_HEAD(&pcd->clock_list); - mutex_init(&pcd->lock); + spin_lock_init(&pcd->lock); dev->power.subsys_data = pcd; return 0; } @@ -181,12 +181,12 @@ void pm_clk_destroy(struct device *dev) dev->power.subsys_data = NULL; - mutex_lock(&pcd->lock); + spin_lock_irq(&pcd->lock); list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node) __pm_clk_remove(ce); - mutex_unlock(&pcd->lock); + spin_unlock_irq(&pcd->lock); kfree(pcd); } @@ -220,13 +220,14 @@ int pm_clk_suspend(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); if (!pcd) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry_reverse(ce, &pcd->clock_list, node) { if (ce->status == PCE_STATUS_NONE) @@ -238,7 +239,7 @@ int pm_clk_suspend(struct device *dev) } } - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -251,13 +252,14 @@ int pm_clk_resume(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); if (!pcd) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry(ce, &pcd->clock_list, node) { if (ce->status == PCE_STATUS_NONE) @@ -269,7 +271,7 @@ int pm_clk_resume(struct device *dev) } } - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -344,6 +346,7 @@ int pm_clk_suspend(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); @@ -351,12 +354,12 @@ int pm_clk_suspend(struct device *dev) if (!pcd || !dev->driver) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry_reverse(ce, &pcd->clock_list, node) clk_disable(ce->clk); - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } @@ -369,6 +372,7 @@ int pm_clk_resume(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce; + unsigned long flags; dev_dbg(dev, "%s()\n", __func__); @@ -376,12 +380,12 @@ int pm_clk_resume(struct device *dev) if (!pcd || !dev->driver) return 0; - mutex_lock(&pcd->lock); + spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry(ce, &pcd->clock_list, node) clk_enable(ce->clk); - mutex_unlock(&pcd->lock); + spin_unlock_irqrestore(&pcd->lock, flags); return 0; } -- cgit v1.2.3-70-g09d2 From 5a50a01bf00c8191073fdf518e1af1e950ac3af5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 24 Aug 2011 21:41:08 +0200 Subject: sh-sci / PM: Use power.irq_safe Since sci_port_enable() and sci_port_disable() may be run with interrupts off and they execute pm_runtime_get_sync() and pm_runtime_put_sync(), respectively, the SCI device's power.irq_safe flag has to be set to indicate that it is safe to execute runtime PM callbacks for this device with interrupts off. Signed-off-by: Rafael J. Wysocki Acked-by: Magnus Damm --- drivers/tty/serial/sh-sci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 2ec57b2fb27..a9414facda4 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1913,6 +1913,7 @@ static int __devinit sci_init_single(struct platform_device *dev, port->dev = &dev->dev; + pm_runtime_irq_safe(&dev->dev); pm_runtime_enable(&dev->dev); } -- cgit v1.2.3-70-g09d2 From 1b965f1891eac2d8583b5248ef0bcbc91c201e27 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Wed, 24 Aug 2011 15:07:04 -0500 Subject: staging: tidspbridge: fix compilation on dsp clock functions Seen on v3.1-rc3, patch: omap: mcbsp: Drop in-driver transfer support bafe2721a0fbd1cc1af04384133684f660f3658e Removed code that now cause tidspbridge to break while compiling. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/dsp-clock.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index 589a0554332..3d1279c424a 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -209,7 +209,6 @@ int dsp_clk_enable(enum dsp_clk_id clk_id) break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: - omap_mcbsp_set_io_type(MCBSP_ID(clk_id), OMAP_MCBSP_POLL_IO); omap_mcbsp_request(MCBSP_ID(clk_id)); omap2_mcbsp_set_clks_src(MCBSP_ID(clk_id), MCBSP_CLKS_PAD_SRC); break; -- cgit v1.2.3-70-g09d2 From c8d47631a48f254d062db8084776d1fb24785e7b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 9 Aug 2011 20:17:29 +0200 Subject: i2c-nomadik: fix kerneldoc warning There was a missing struct item in the kerneldoc, add it and fix another pretty-printing formatting issue with a missing space. Signed-off-by: Linus Walleij Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-nomadik.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index f9b8854fe0a..b228e09c5d0 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -146,6 +146,7 @@ struct i2c_nmk_client { * @stop: stop condition * @xfer_complete: acknowledge completion for a I2C message * @result: controller propogated result + * @regulator: pointer to i2c regulator * @busy: Busy doing transfer */ struct nmk_i2c_dev { @@ -509,7 +510,7 @@ static int write_i2c(struct nmk_i2c_dev *dev) if (timeout < 0) { dev_err(&dev->pdev->dev, - "wait_for_completion_timeout" + "wait_for_completion_timeout " "returned %d waiting for event\n", timeout); status = timeout; } -- cgit v1.2.3-70-g09d2 From caca9510ff4e5d842c0589110243d60927836222 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 24 Aug 2011 15:55:30 -0700 Subject: firmware loader: allow builtin firmware load even if usermodehelper is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In commit a144c6a6c924 ("PM: Print a warning if firmware is requested when tasks are frozen") we not only printed a warning if somebody tried to load the firmware when tasks are frozen - we also failed the load. But that check was done before the check for built-in firmware, and then when we disallowed usermode helpers during bootup (commit 288d5abec831: "Boot up with usermodehelper disabled"), that actually means that built-in modules can no longer load their firmware even if the firmware is built in too. Which used to work, and some people depended on it for the R100 driver. So move the test for usermodehelper_is_disabled() down, to after checking the built-in firmware. This should fix: https://bugzilla.kernel.org/show_bug.cgi?id=40952 Reported-by: James Cloos Bisected-by: Elimar Riesebieter Cc: Michel Dänzer Cc: Rafael Wysocki Cc: Greg Kroah-Hartman Cc: Valdis Kletnieks Signed-off-by: Linus Torvalds --- drivers/base/firmware_class.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index bbb03e6f725..06ed6b4e7df 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -521,11 +521,6 @@ static int _request_firmware(const struct firmware **firmware_p, if (!firmware_p) return -EINVAL; - if (WARN_ON(usermodehelper_is_disabled())) { - dev_err(device, "firmware: %s will not be loaded\n", name); - return -EBUSY; - } - *firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL); if (!firmware) { dev_err(device, "%s: kmalloc(struct firmware) failed\n", @@ -539,6 +534,12 @@ static int _request_firmware(const struct firmware **firmware_p, return 0; } + if (WARN_ON(usermodehelper_is_disabled())) { + dev_err(device, "firmware: %s will not be loaded\n", name); + retval = -EBUSY; + goto out; + } + if (uevent) dev_dbg(device, "firmware: requesting %s\n", name); -- cgit v1.2.3-70-g09d2 From c96fbdd0ab97235f930ebf24b38fa42a2e3458cf Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 25 Aug 2011 11:46:58 +0200 Subject: USB: ftdi_sio: add Calao reference board support Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Gregory Hermant Cc: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 78a2cf9551c..5fc13e71791 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -101,6 +101,7 @@ static int ftdi_jtag_probe(struct usb_serial *serial); static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); static int ftdi_NDI_device_setup(struct usb_serial *serial); static int ftdi_stmclite_probe(struct usb_serial *serial); +static int ftdi_8u2232c_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); @@ -128,6 +129,10 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = { .probe = ftdi_stmclite_probe, }; +static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { + .probe = ftdi_8u2232c_probe, +}; + /* * The 8U232AM has the same API as the sio except for: * - it can support MUCH higher baudrates; up to: @@ -178,7 +183,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , + .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, @@ -1737,6 +1743,18 @@ static int ftdi_jtag_probe(struct usb_serial *serial) return 0; } +static int ftdi_8u2232c_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + + dbg("%s", __func__); + + if (strcmp(udev->manufacturer, "CALAO Systems") == 0) + return ftdi_jtag_probe(serial); + + return 0; +} + /* * First and second port on STMCLiteadaptors is reserved for JTAG interface * and the forth port for pio -- cgit v1.2.3-70-g09d2 From 0de3b4856907d9937c6c23cfbfdec1e8e3596ea7 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 25 Aug 2011 15:37:45 +0200 Subject: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked Otherwise it just contains random memory. Issue detected by cppcheck. Signed-off-by: Thomas Jarosch Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 5a1ae9f06cb..56a8554d903 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -878,7 +878,7 @@ static void assert_panel_unlocked(struct drm_i915_private *dev_priv, int pp_reg, lvds_reg; u32 val; enum pipe panel_pipe = PIPE_A; - bool locked = locked; + bool locked = true; if (HAS_PCH_SPLIT(dev_priv->dev)) { pp_reg = PCH_PP_CONTROL; -- cgit v1.2.3-70-g09d2 From 06ed4625fdfffee1251708cd30de276186d5fdcf Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Thu, 25 Aug 2011 15:59:01 -0700 Subject: drivers/misc/pti.c: add missing includes Found on allmodconfig build (ARCH=alpha) drivers/misc/pti.c: In function 'get_id': drivers/misc/pti.c:249: error: implicit declaration of function 'kmalloc' drivers/misc/pti.c: In function 'pti_char_write': drivers/misc/pti.c:658: error: implicit declaration of function 'copy_from_user' Signed-off-by: Sergei Trofimovich Cc: Greg Kroah-Hartman Cc: J Freyensee Cc: Jeremy Rocher Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/pti.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index 8653bd0b1a3..06df1877ad0 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #define DRIVERNAME "pti" #define PCINAME "pciPTI" -- cgit v1.2.3-70-g09d2 From 58299449257566613f58dcfb757f0ba4a377987a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 25 Aug 2011 15:59:04 -0700 Subject: w1: fix for loop in w1_f29_remove_slave() The for loop was looking for i <= 0 instead of i >= 0 so this function never did anything. Also we started with i = NB_SYSFS_BIN_FILES instead of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug. Reported-by: Bojan Prtvar Signed-off-by: Dan Carpenter Acked-by: Jean-Franois Dagenais Cc: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/slaves/w1_ds2408.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index c37781899d9..7c8cdb8aed2 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -373,7 +373,7 @@ static int w1_f29_add_slave(struct w1_slave *sl) static void w1_f29_remove_slave(struct w1_slave *sl) { int i; - for (i = NB_SYSFS_BIN_FILES; i <= 0; --i) + for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i) sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f29_sysfs_bin_files[i])); } -- cgit v1.2.3-70-g09d2 From a801876638c5ce650223476c4eb8f37cea32dc1c Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 25 Aug 2011 15:59:06 -0700 Subject: MAINTAINERS: Evgeniy has moved Signed-off-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- drivers/w1/masters/ds2490.c | 4 ++-- drivers/w1/masters/matrox_w1.c | 4 ++-- drivers/w1/slaves/w1_smem.c | 4 ++-- drivers/w1/slaves/w1_therm.c | 4 ++-- drivers/w1/w1.c | 4 ++-- drivers/w1/w1.h | 2 +- drivers/w1/w1_family.c | 2 +- drivers/w1/w1_family.h | 2 +- drivers/w1/w1_int.c | 2 +- drivers/w1/w1_int.h | 2 +- drivers/w1/w1_io.c | 2 +- drivers/w1/w1_log.h | 2 +- drivers/w1/w1_netlink.c | 2 +- drivers/w1/w1_netlink.h | 2 +- include/linux/connector.h | 2 +- 16 files changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 069ee3b5c65..ee0ac2c98be 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7087,7 +7087,7 @@ S: Supported F: drivers/mmc/host/vub300.c W1 DALLAS'S 1-WIRE BUS -M: Evgeniy Polyakov +M: Evgeniy Polyakov S: Maintained F: Documentation/w1/ F: drivers/w1/ diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c index 02bf7bf7160..b5abaae38e9 100644 --- a/drivers/w1/masters/ds2490.c +++ b/drivers/w1/masters/ds2490.c @@ -1,7 +1,7 @@ /* * dscore.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify @@ -1024,5 +1024,5 @@ module_init(ds_init); module_exit(ds_fini); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)"); diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c index 334d1ccf9c9..f667c26b219 100644 --- a/drivers/w1/masters/matrox_w1.c +++ b/drivers/w1/masters/matrox_w1.c @@ -1,7 +1,7 @@ /* * matrox_w1.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify @@ -39,7 +39,7 @@ #include "../w1_log.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire prtocol) over VGA DDC(matrox gpio)."); static struct pci_device_id matrox_w1_tbl[] = { diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c index cc8c02e9259..84655625c87 100644 --- a/drivers/w1/slaves/w1_smem.c +++ b/drivers/w1/slaves/w1_smem.c @@ -1,7 +1,7 @@ /* * w1_smem.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify @@ -32,7 +32,7 @@ #include "../w1_family.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family."); static struct w1_family w1_smem_family_01 = { diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 402928b135d..a1ef9b5b38c 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -1,7 +1,7 @@ /* * w1_therm.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify @@ -34,7 +34,7 @@ #include "../w1_family.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); /* Allow the strong pullup to be disabled, but default to enabled. diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 6c136c19e98..c3749782385 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -1,7 +1,7 @@ /* * w1.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify @@ -42,7 +42,7 @@ #include "w1_netlink.h" MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_AUTHOR("Evgeniy Polyakov "); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol."); static int w1_timeout = 10; diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index 1ce23fc6186..4d012ca3f32 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -1,7 +1,7 @@ /* * w1.h * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_family.c b/drivers/w1/w1_family.c index 4a099041f28..63359797c8b 100644 --- a/drivers/w1/w1_family.c +++ b/drivers/w1/w1_family.c @@ -1,7 +1,7 @@ /* * w1_family.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 98a1ac0f469..490cda2281b 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h @@ -1,7 +1,7 @@ /* * w1_family.h * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index b50be3f1073..d220bce2cee 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -1,7 +1,7 @@ /* * w1_int.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_int.h b/drivers/w1/w1_int.h index 4274082d226..2ad7d4414be 100644 --- a/drivers/w1/w1_int.h +++ b/drivers/w1/w1_int.h @@ -1,7 +1,7 @@ /* * w1_int.h * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index 8e8b64cfafb..765b37b62a4 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -1,7 +1,7 @@ /* * w1_io.c * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_log.h b/drivers/w1/w1_log.h index e6ab7cf08f8..9c7bd62e6bd 100644 --- a/drivers/w1/w1_log.h +++ b/drivers/w1/w1_log.h @@ -1,7 +1,7 @@ /* * w1_log.h * - * Copyright (c) 2004 Evgeniy Polyakov + * Copyright (c) 2004 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c index 55aabd927c6..40788c925d1 100644 --- a/drivers/w1/w1_netlink.c +++ b/drivers/w1/w1_netlink.c @@ -1,7 +1,7 @@ /* * w1_netlink.c * - * Copyright (c) 2003 Evgeniy Polyakov + * Copyright (c) 2003 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h index 27e950f935b..b0922dc2965 100644 --- a/drivers/w1/w1_netlink.h +++ b/drivers/w1/w1_netlink.h @@ -1,7 +1,7 @@ /* * w1_netlink.h * - * Copyright (c) 2003 Evgeniy Polyakov + * Copyright (c) 2003 Evgeniy Polyakov * * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/connector.h b/include/linux/connector.h index 0c69ad825b3..3c9c54fd569 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -1,7 +1,7 @@ /* * connector.h * - * 2004-2005 Copyright (c) Evgeniy Polyakov + * 2004-2005 Copyright (c) Evgeniy Polyakov * All rights reserved. * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3-70-g09d2 From 7e8aa048989bf7e0604996a3e2068fb1a81f81bd Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 25 Aug 2011 15:59:09 -0700 Subject: drivers/char/msm_smd_pkt.c: don't use IS_ERR() The various basic memory allocation function return NULL, not an ERR_PTR. The semantic patch that makes this change is available in scripts/coccinelle/null/eno.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Cc: Niranjana Vishwanathapura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/msm_smd_pkt.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/msm_smd_pkt.c b/drivers/char/msm_smd_pkt.c index b6f8a65c996..8eca55deb3a 100644 --- a/drivers/char/msm_smd_pkt.c +++ b/drivers/char/msm_smd_pkt.c @@ -379,9 +379,8 @@ static int __init smd_pkt_init(void) for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { smd_pkt_devp[i] = kzalloc(sizeof(struct smd_pkt_dev), GFP_KERNEL); - if (IS_ERR(smd_pkt_devp[i])) { - r = PTR_ERR(smd_pkt_devp[i]); - pr_err("kmalloc() failed %d\n", r); + if (!smd_pkt_devp[i]) { + pr_err("kmalloc() failed\n"); goto clean_cdevs; } -- cgit v1.2.3-70-g09d2 From 284fb68d00c56e971ed01e0b4bac5ddd4d1b74ab Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 25 Aug 2011 15:59:13 -0700 Subject: rapidio: fix use of non-compatible registers Replace/remove use of RIO v.1.2 registers/bits that are not forward-compatible with newer versions of RapidIO specification. RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR, Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR. Use of removed (since RIO v.1.3) register bits affects users of currently available 1.3 and 2.x compliant devices who may use not so recent kernel versions. Removing checks for unsupported bits makes corresponding routines compatible with all versions of RapidIO specification. Therefore, backporting makes stable kernel versions compliant with RIO v.1.3 and later as well. Signed-off-by: Alexandre Bounine Cc: Kumar Gala Cc: Matt Porter Cc: Li Yang Cc: Thomas Moll Cc: Chul Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/rionet.c | 23 ++++++++--------------- drivers/rapidio/rio-scan.c | 3 +-- include/linux/rio_regs.h | 18 +++++++++--------- 3 files changed, 18 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 86ac38c96bc..3bb13113703 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -80,13 +80,13 @@ static int rionet_capable = 1; */ static struct rio_dev **rionet_active; -#define is_rionet_capable(pef, src_ops, dst_ops) \ - ((pef & RIO_PEF_INB_MBOX) && \ - (pef & RIO_PEF_INB_DOORBELL) && \ +#define is_rionet_capable(src_ops, dst_ops) \ + ((src_ops & RIO_SRC_OPS_DATA_MSG) && \ + (dst_ops & RIO_DST_OPS_DATA_MSG) && \ (src_ops & RIO_SRC_OPS_DOORBELL) && \ (dst_ops & RIO_DST_OPS_DOORBELL)) #define dev_rionet_capable(dev) \ - is_rionet_capable(dev->pef, dev->src_ops, dev->dst_ops) + is_rionet_capable(dev->src_ops, dev->dst_ops) #define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001) #define RIONET_GET_DESTID(x) (*(u16 *)(x + 4)) @@ -282,7 +282,6 @@ static int rionet_open(struct net_device *ndev) { int i, rc = 0; struct rionet_peer *peer, *tmp; - u32 pwdcsr; struct rionet_private *rnet = netdev_priv(ndev); if (netif_msg_ifup(rnet)) @@ -332,13 +331,8 @@ static int rionet_open(struct net_device *ndev) continue; } - /* - * If device has initialized inbound doorbells, - * send a join message - */ - rio_read_config_32(peer->rdev, RIO_WRITE_PORT_CSR, &pwdcsr); - if (pwdcsr & RIO_DOORBELL_AVAIL) - rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); + /* Send a join message */ + rio_send_doorbell(peer->rdev, RIONET_DOORBELL_JOIN); } out: @@ -492,7 +486,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) { int rc = -ENODEV; - u32 lpef, lsrc_ops, ldst_ops; + u32 lsrc_ops, ldst_ops; struct rionet_peer *peer; struct net_device *ndev = NULL; @@ -515,12 +509,11 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) * on later probes */ if (!rionet_check) { - rio_local_read_config_32(rdev->net->hport, RIO_PEF_CAR, &lpef); rio_local_read_config_32(rdev->net->hport, RIO_SRC_OPS_CAR, &lsrc_ops); rio_local_read_config_32(rdev->net->hport, RIO_DST_OPS_CAR, &ldst_ops); - if (!is_rionet_capable(lpef, lsrc_ops, ldst_ops)) { + if (!is_rionet_capable(lsrc_ops, ldst_ops)) { printk(KERN_ERR "%s: local device is not network capable\n", DRV_NAME); diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index ee893581d4b..ebe77dd87da 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -505,8 +505,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net, rdev->dev.dma_mask = &rdev->dma_mask; rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - if ((rdev->pef & RIO_PEF_INB_DOORBELL) && - (rdev->dst_ops & RIO_DST_OPS_DOORBELL)) + if (rdev->dst_ops & RIO_DST_OPS_DOORBELL) rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h index 9026b30238f..218168a2b5e 100644 --- a/include/linux/rio_regs.h +++ b/include/linux/rio_regs.h @@ -36,12 +36,12 @@ #define RIO_PEF_PROCESSOR 0x20000000 /* [I] Processor */ #define RIO_PEF_SWITCH 0x10000000 /* [I] Switch */ #define RIO_PEF_MULTIPORT 0x08000000 /* [VI, 2.1] Multiport */ -#define RIO_PEF_INB_MBOX 0x00f00000 /* [II] Mailboxes */ -#define RIO_PEF_INB_MBOX0 0x00800000 /* [II] Mailbox 0 */ -#define RIO_PEF_INB_MBOX1 0x00400000 /* [II] Mailbox 1 */ -#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */ -#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */ -#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */ +#define RIO_PEF_INB_MBOX 0x00f00000 /* [II, <= 1.2] Mailboxes */ +#define RIO_PEF_INB_MBOX0 0x00800000 /* [II, <= 1.2] Mailbox 0 */ +#define RIO_PEF_INB_MBOX1 0x00400000 /* [II, <= 1.2] Mailbox 1 */ +#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */ +#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */ +#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */ #define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */ #define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */ #define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */ @@ -102,7 +102,7 @@ #define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */ #define RIO_RT_MAX_DESTID 0x0000ffff -#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */ +#define RIO_MBOX_CSR 0x40 /* [II, <= 1.2] Mailbox CSR */ #define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */ #define RIO_MBOX0_FULL 0x40000000 /* [II] Mbox 0 full */ #define RIO_MBOX0_EMPTY 0x20000000 /* [II] Mbox 0 empty */ @@ -128,8 +128,8 @@ #define RIO_MBOX3_FAIL 0x00000008 /* [II] Mbox 3 fail */ #define RIO_MBOX3_ERROR 0x00000004 /* [II] Mbox 3 error */ -#define RIO_WRITE_PORT_CSR 0x44 /* [I] Write Port CSR */ -#define RIO_DOORBELL_CSR 0x44 /* [II] Doorbell CSR */ +#define RIO_WRITE_PORT_CSR 0x44 /* [I, <= 1.2] Write Port CSR */ +#define RIO_DOORBELL_CSR 0x44 /* [II, <= 1.2] Doorbell CSR */ #define RIO_DOORBELL_AVAIL 0x80000000 /* [II] Doorbell avail */ #define RIO_DOORBELL_FULL 0x40000000 /* [II] Doorbell full */ #define RIO_DOORBELL_EMPTY 0x20000000 /* [II] Doorbell empty */ -- cgit v1.2.3-70-g09d2 From 15b1a8f2b990c0c1dacfad0e5ccaf05c32c52147 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:14 -0700 Subject: drivers/video/backlight/ep93xx_bl.c: add missing include of linux/module.h ep93xx_bl.c uses interfaces from linux/module.h, so it should include that file. This patch fixes build errors: CC [M] drivers/video/backlight/ep93xx_bl.o drivers/video/backlight/ep93xx_bl.c:138: error: 'THIS_MODULE' undeclared here (not in a function) drivers/video/backlight/ep93xx_bl.c:158: error: expected declaration specifiers or '...' before string constant drivers/video/backlight/ep93xx_bl.c:158: warning: data definition has no type or storage class ... Signed-off-by: Axel Lin Acked-by: H Hartley Sweeten Cc: Ryan Mallon Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/ep93xx_bl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c index 9f1e389d51d..b0582917f0c 100644 --- a/drivers/video/backlight/ep93xx_bl.c +++ b/drivers/video/backlight/ep93xx_bl.c @@ -11,7 +11,7 @@ * BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors. */ - +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 86383b55791bd97e88ef493e33ef521ee244f3d9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:15 -0700 Subject: leds: add missing include of linux/module.h Add missing include of linux/module.h for drivers that use interfaces from linux/module.h. This patch fixes build errors. Signed-off-by: Axel Lin Cc: Jonathan McDowell Acked-by: Kristoffer Ericson Cc: Magnus Damm Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-ams-delta.c | 1 + drivers/leds/leds-hp6xx.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c index b9826032450..8c00937bf7e 100644 --- a/drivers/leds/leds-ams-delta.c +++ b/drivers/leds/leds-ams-delta.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c index e4ce1fd4633..bcfbd3a60ea 100644 --- a/drivers/leds/leds-hp6xx.c +++ b/drivers/leds/leds-hp6xx.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From cc7993f6439b49909a8792660c4d0741fec9d584 Mon Sep 17 00:00:00 2001 From: Dilan Lee Date: Thu, 25 Aug 2011 15:59:17 -0700 Subject: backlight: add a callback 'notify_after' for backlight control We need a callback to do some things after pwm_enable, pwm_disable and pwm_config. Signed-off-by: Dilan Lee Reviewed-by: Robert Morell Reviewed-by: Arun Murthy Cc: Richard Purdie Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/pwm_bl.c | 9 +++++++++ include/linux/pwm_backlight.h | 1 + 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index b8f38ec6eb1..8b5b2a4124c 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -28,6 +28,8 @@ struct pwm_bl_data { unsigned int lth_brightness; int (*notify)(struct device *, int brightness); + void (*notify_after)(struct device *, + int brightness); int (*check_fb)(struct device *, struct fb_info *); }; @@ -55,6 +57,10 @@ static int pwm_backlight_update_status(struct backlight_device *bl) pwm_config(pb->pwm, brightness, pb->period); pwm_enable(pb->pwm); } + + if (pb->notify_after) + pb->notify_after(pb->dev, brightness); + return 0; } @@ -105,6 +111,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->period = data->pwm_period_ns; pb->notify = data->notify; + pb->notify_after = data->notify_after; pb->check_fb = data->check_fb; pb->lth_brightness = data->lth_brightness * (data->pwm_period_ns / data->max_brightness); @@ -172,6 +179,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev, pb->notify(pb->dev, 0); pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); + if (pb->notify_after) + pb->notify_after(pb->dev, 0); return 0; } diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 5e3e25a3c9c..63d2df43e61 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -14,6 +14,7 @@ struct platform_pwm_backlight_data { unsigned int pwm_period_ns; int (*init)(struct device *dev); int (*notify)(struct device *dev, int brightness); + void (*notify_after)(struct device *dev, int brightness); void (*exit)(struct device *dev); int (*check_fb)(struct device *dev, struct fb_info *info); }; -- cgit v1.2.3-70-g09d2 From c53252b780e26c73c6a4e40bc14179447504cccd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:18 -0700 Subject: backlight: fix module alias prefix for adp8870_bl This is an i2c driver, not a platform driver, thus use "i2c" prefix for the module alias. Signed-off-by: Axel Lin Acked-by: Michael Hennerich Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/adp8870_bl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c index 05a8832bb3e..d06886a2bfb 100644 --- a/drivers/video/backlight/adp8870_bl.c +++ b/drivers/video/backlight/adp8870_bl.c @@ -1009,4 +1009,4 @@ module_exit(adp8870_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("ADP8870 Backlight driver"); -MODULE_ALIAS("platform:adp8870-backlight"); +MODULE_ALIAS("i2c:adp8870-backlight"); -- cgit v1.2.3-70-g09d2 From b89d5f17d4b02ae9f3a691c2cb260e1929c6261b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:19 -0700 Subject: drivers/misc/fsa9480.c: fix a leak of the IRQ during init failure Make sure we are passing the same cookie in all calls to request_threaded_irq() and free_irq(). Signed-off-by: Axel Lin Cc: Donggeun Kim Cc: Minkyu Kang Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/fsa9480.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c index 5325a7e70dc..27dc0d21aaf 100644 --- a/drivers/misc/fsa9480.c +++ b/drivers/misc/fsa9480.c @@ -455,7 +455,7 @@ static int __devinit fsa9480_probe(struct i2c_client *client, fail2: if (client->irq) - free_irq(client->irq, NULL); + free_irq(client->irq, usbsw); fail1: i2c_set_clientdata(client, NULL); kfree(usbsw); @@ -466,7 +466,7 @@ static int __devexit fsa9480_remove(struct i2c_client *client) { struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client); if (client->irq) - free_irq(client->irq, NULL); + free_irq(client->irq, usbsw); i2c_set_clientdata(client, NULL); sysfs_remove_group(&client->dev.kobj, &fsa9480_group); -- cgit v1.2.3-70-g09d2 From 37b7bf67c36d3a2b426c0cb2787d948949574103 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:20 -0700 Subject: drivers/misc/ab8500-pwm.c: fix modalias Since 43cc71eed12 ("platform: prefix MODALIAS with "platform:""), the platform modalias is prefixed with "platform:". This patch changes the MODULE_ALIAS to "platform:ab8500-pwm". Signed-off-by: Axel Lin Acked-by: Arun Murthy Cc: Linus Walleij Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/ab8500-pwm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c index 54e3d05b63c..35903154ca2 100644 --- a/drivers/misc/ab8500-pwm.c +++ b/drivers/misc/ab8500-pwm.c @@ -164,5 +164,5 @@ subsys_initcall(ab8500_pwm_init); module_exit(ab8500_pwm_exit); MODULE_AUTHOR("Arun MURTHY "); MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver"); -MODULE_ALIAS("AB8500 PWM driver"); +MODULE_ALIAS("platform:ab8500-pwm"); MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-70-g09d2 From 1424e21f66f4c51c31ba6ac188df46b43f51556b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 25 Aug 2011 15:59:21 -0700 Subject: drivers/leds/leds-bd2802.c: bd2802_unregister_led_classdev() should unregister all registered leds bd2802_unregister_led_classdev() should unregister all registered instances of led_classdev class that had registered by bd2802_register_led_classdev(). Signed-off-by: Axel Lin Acked-by: Kim Kyuwon Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-bd2802.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c index 3ebe3824662..ea2185531f8 100644 --- a/drivers/leds/leds-bd2802.c +++ b/drivers/leds/leds-bd2802.c @@ -662,6 +662,11 @@ failed_unregister_led1_R: static void bd2802_unregister_led_classdev(struct bd2802_led *led) { cancel_work_sync(&led->work); + led_classdev_unregister(&led->cdev_led2b); + led_classdev_unregister(&led->cdev_led2g); + led_classdev_unregister(&led->cdev_led2r); + led_classdev_unregister(&led->cdev_led1b); + led_classdev_unregister(&led->cdev_led1g); led_classdev_unregister(&led->cdev_led1r); } -- cgit v1.2.3-70-g09d2 From 4e8896cde182b4eab6f2d0af9b6eef87720fae0d Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Thu, 25 Aug 2011 15:59:22 -0700 Subject: drivers/rtc/rtc-s3c.c: correct debug messages RTC-S3C used to print out debug messages incorrectly. This patch corrects incorrect outputs. (undecoded bcd numbers, incorrectly decoded register values) This patch affects the pr-debug messages only. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Kukjin Kim Cc: Alessandro Zummo Cc: Changhwan Youn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 9329dbb9eba..067207afc08 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -152,10 +152,6 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) goto retry_get_time; } - pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n", - 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, - rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); - rtc_tm->tm_sec = bcd2bin(rtc_tm->tm_sec); rtc_tm->tm_min = bcd2bin(rtc_tm->tm_min); rtc_tm->tm_hour = bcd2bin(rtc_tm->tm_hour); @@ -164,6 +160,11 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm) rtc_tm->tm_year = bcd2bin(rtc_tm->tm_year); rtc_tm->tm_year += 100; + + pr_debug("read time %04d.%02d.%02d %02d:%02d:%02d\n", + 1900 + rtc_tm->tm_year, rtc_tm->tm_mon, rtc_tm->tm_mday, + rtc_tm->tm_hour, rtc_tm->tm_min, rtc_tm->tm_sec); + rtc_tm->tm_mon -= 1; clk_disable(rtc_clk); @@ -269,10 +270,9 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) clk_enable(rtc_clk); pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n", alrm->enabled, - 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, + 1900 + tm->tm_year, tm->tm_mon + 1, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); - alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN; writeb(0x00, base + S3C2410_RTCALM); -- cgit v1.2.3-70-g09d2 From 62d1760180c84cba68cc83696fa0bde0593007bd Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Thu, 25 Aug 2011 15:59:24 -0700 Subject: drivers/rtc/rtc-s3c.c: allow multiple open / allow no-ioctl-open'ed rtc to have irq. The previous rtc-s3c had two issues related with its IRQ. 1. Users cannot open rtc multiple times because an open operation calls request_irq on the same IRQ. (e.g., two user processes wants to open and read RTC time from rtc-s3c at the same time) 2. If alarm is set and no one has the rtc opened with filesystem (either the alarm is set by kernel/boot-loader or user set an alarm and closed rtc dev file), the pending bit is not cleared and no further interrupt is invoked. When the alarm is used by the system itself such as a resume from suspend-to-RAM or other Low-power modes/idle, this is a critical issue. This patch mitigates these issues by calling request_irq at probe and free_irq at remove. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Kukjin Kim Cc: Alessandro Zummo Cc: Changhwan Youn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 67 +++++++++++++++++++-------------------------------- 1 file changed, 25 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 067207afc08..4e7c04e773e 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -319,49 +319,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq) return 0; } -static int s3c_rtc_open(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct rtc_device *rtc_dev = platform_get_drvdata(pdev); - int ret; - - ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq, - IRQF_DISABLED, "s3c2410-rtc alarm", rtc_dev); - - if (ret) { - dev_err(dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret); - return ret; - } - - ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq, - IRQF_DISABLED, "s3c2410-rtc tick", rtc_dev); - - if (ret) { - dev_err(dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret); - goto tick_err; - } - - return ret; - - tick_err: - free_irq(s3c_rtc_alarmno, rtc_dev); - return ret; -} - -static void s3c_rtc_release(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct rtc_device *rtc_dev = platform_get_drvdata(pdev); - - /* do not clear AIE here, it may be needed for wake */ - - free_irq(s3c_rtc_alarmno, rtc_dev); - free_irq(s3c_rtc_tickno, rtc_dev); -} - static const struct rtc_class_ops s3c_rtcops = { - .open = s3c_rtc_open, - .release = s3c_rtc_release, .read_time = s3c_rtc_gettime, .set_time = s3c_rtc_settime, .read_alarm = s3c_rtc_getalarm, @@ -425,6 +383,9 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev) { struct rtc_device *rtc = platform_get_drvdata(dev); + free_irq(s3c_rtc_alarmno, rtc); + free_irq(s3c_rtc_tickno, rtc); + platform_set_drvdata(dev, NULL); rtc_device_unregister(rtc); @@ -548,10 +509,32 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_setfreq(&pdev->dev, 1); + ret = request_irq(s3c_rtc_alarmno, s3c_rtc_alarmirq, + IRQF_DISABLED, "s3c2410-rtc alarm", rtc); + if (ret) { + dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_alarmno, ret); + goto err_alarm_irq; + } + + ret = request_irq(s3c_rtc_tickno, s3c_rtc_tickirq, + IRQF_DISABLED, "s3c2410-rtc tick", rtc); + if (ret) { + dev_err(&pdev->dev, "IRQ%d error %d\n", s3c_rtc_tickno, ret); + free_irq(s3c_rtc_alarmno, rtc); + goto err_tick_irq; + } + clk_disable(rtc_clk); return 0; + err_tick_irq: + free_irq(s3c_rtc_alarmno, rtc); + + err_alarm_irq: + platform_set_drvdata(pdev, NULL); + rtc_device_unregister(rtc); + err_nortc: s3c_rtc_enable(pdev, 0); clk_disable(rtc_clk); -- cgit v1.2.3-70-g09d2