From 1f9c3e1f07e39c8af3bf42236fc553b5bb0f83f1 Mon Sep 17 00:00:00 2001 From: Martin Ambrose Date: Mon, 24 May 2010 14:34:01 -0700 Subject: fbdev: da8xx/omap-l1xx: implement double buffering This work includes the following: - Implement handler for FBIO_WAITFORVSYNC ioctl. - Allocate the data and palette buffers separately. A consequence of this is that the palette and data loading is now done in different phases. And that the LCD must be disabled temporarily after the palette is loaded but this will only happen once after init and each time the palette is changed. I think this is OK. - Allocate two (ping and pong) framebuffers from memory. - Add pan_display handler which toggles the LCDC DMA registers between the ping and pong buffers. Signed-off-by: Martin Ambrose Cc: Chaithrika U S Cc: Sudhakar Rajashekhara Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/da8xx-fb.c | 301 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 234 insertions(+), 67 deletions(-) (limited to 'drivers') diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 8d244ba0f60..cad7d45c8ba 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -36,7 +36,9 @@ #define DRIVER_NAME "da8xx_lcdc" /* LCD Status Register */ +#define LCD_END_OF_FRAME1 BIT(9) #define LCD_END_OF_FRAME0 BIT(8) +#define LCD_PL_LOAD_DONE BIT(6) #define LCD_FIFO_UNDERFLOW BIT(5) #define LCD_SYNC_LOST BIT(2) @@ -58,11 +60,13 @@ #define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) #define PALETTE_AND_DATA 0x00 #define PALETTE_ONLY 0x01 +#define DATA_ONLY 0x02 #define LCD_MONO_8BIT_MODE BIT(9) #define LCD_RASTER_ORDER BIT(8) #define LCD_TFT_MODE BIT(7) #define LCD_UNDERFLOW_INT_ENA BIT(6) +#define LCD_PL_ENABLE BIT(4) #define LCD_MONOCHROME_MODE BIT(1) #define LCD_RASTER_ENABLE BIT(0) #define LCD_TFT_ALT_ENABLE BIT(23) @@ -87,6 +91,10 @@ #define LCD_DMA_CTRL_REG 0x40 #define LCD_DMA_FRM_BUF_BASE_ADDR_0_REG 0x44 #define LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG 0x48 +#define LCD_DMA_FRM_BUF_BASE_ADDR_1_REG 0x4C +#define LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG 0x50 + +#define LCD_NUM_BUFFERS 2 #define WSI_TIMEOUT 50 #define PALETTE_SIZE 256 @@ -111,13 +119,20 @@ static inline void lcdc_write(unsigned int val, unsigned int addr) struct da8xx_fb_par { resource_size_t p_palette_base; unsigned char *v_palette_base; + dma_addr_t vram_phys; + unsigned long vram_size; + void *vram_virt; + unsigned int dma_start; + unsigned int dma_end; struct clk *lcdc_clk; int irq; unsigned short pseudo_palette[16]; - unsigned int databuf_sz; unsigned int palette_sz; unsigned int pxl_clk; int blank; + wait_queue_head_t vsync_wait; + int vsync_flag; + int vsync_timeout; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif @@ -148,9 +163,9 @@ static struct fb_fix_screeninfo da8xx_fb_fix __devinitdata = { .type = FB_TYPE_PACKED_PIXELS, .type_aux = 0, .visual = FB_VISUAL_PSEUDOCOLOR, - .xpanstep = 1, + .xpanstep = 0, .ypanstep = 1, - .ywrapstep = 1, + .ywrapstep = 0, .accel = FB_ACCEL_NONE }; @@ -221,22 +236,48 @@ static inline void lcd_disable_raster(void) static void lcd_blit(int load_mode, struct da8xx_fb_par *par) { - u32 tmp = par->p_palette_base + par->databuf_sz - 4; - u32 reg; + u32 start; + u32 end; + u32 reg_ras; + u32 reg_dma; + + /* init reg to clear PLM (loading mode) fields */ + reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); + reg_ras &= ~(3 << 20); + + reg_dma = lcdc_read(LCD_DMA_CTRL_REG); + + if (load_mode == LOAD_DATA) { + start = par->dma_start; + end = par->dma_end; + + reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); + reg_dma |= LCD_END_OF_FRAME_INT_ENA; + reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; + + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + } else if (load_mode == LOAD_PALETTE) { + start = par->p_palette_base; + end = start + par->palette_sz - 1; + + reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); + reg_ras |= LCD_PL_ENABLE; + + lcdc_write(start, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(end, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + } - /* Update the databuf in the hw. */ - lcdc_write(par->p_palette_base, LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); - lcdc_write(tmp, LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + lcdc_write(reg_dma, LCD_DMA_CTRL_REG); + lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); - /* Start the DMA. */ - reg = lcdc_read(LCD_RASTER_CTRL_REG); - reg &= ~(3 << 20); - if (load_mode == LOAD_DATA) - reg |= LCD_PALETTE_LOAD_MODE(PALETTE_AND_DATA); - else if (load_mode == LOAD_PALETTE) - reg |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); - - lcdc_write(reg, LCD_RASTER_CTRL_REG); + /* + * The Raster enable bit must be set after all other control fields are + * set. + */ + lcd_enable_raster(); } /* Configure the Burst Size of DMA */ @@ -368,12 +409,8 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, u32 bpp, u32 raster_order) { - u32 bpl, reg; + u32 reg; - /* Disable Dual Frame Buffer. */ - reg = lcdc_read(LCD_DMA_CTRL_REG); - lcdc_write(reg & ~LCD_DUAL_FRAME_BUFFER_ENABLE, - LCD_DMA_CTRL_REG); /* Set the Panel Width */ /* Pixels per line = (PPL + 1)*16 */ /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ @@ -410,9 +447,6 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, return -EINVAL; } - bpl = width * bpp / 8; - par->databuf_sz = height * bpl + par->palette_sz; - return 0; } @@ -421,8 +455,9 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, struct fb_info *info) { struct da8xx_fb_par *par = info->par; - unsigned short *palette = (unsigned short *)par->v_palette_base; + unsigned short *palette = (unsigned short *) par->v_palette_base; u_short pal; + int update_hw = 0; if (regno > 255) return 1; @@ -439,8 +474,10 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, pal |= (green & 0x00f0); pal |= (blue & 0x000f); - palette[regno] = pal; - + if (palette[regno] != pal) { + update_hw = 1; + palette[regno] = pal; + } } else if ((info->var.bits_per_pixel == 16) && regno < 16) { red >>= (16 - info->var.red.length); red <<= info->var.red.offset; @@ -453,9 +490,16 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, par->pseudo_palette[regno] = red | green | blue; - palette[0] = 0x4000; + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } } + /* Update the palette in the h/w as needed. */ + if (update_hw) + lcd_blit(LOAD_PALETTE, par); + return 0; } @@ -541,15 +585,54 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, static irqreturn_t lcdc_irq_handler(int irq, void *arg) { + struct da8xx_fb_par *par = arg; u32 stat = lcdc_read(LCD_STAT_REG); + u32 reg_ras; if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { lcd_disable_raster(); lcdc_write(stat, LCD_STAT_REG); lcd_enable_raster(); - } else + } else if (stat & LCD_PL_LOAD_DONE) { + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(); + lcdc_write(stat, LCD_STAT_REG); + /* Disable PL completion inerrupt */ + reg_ras = lcdc_read(LCD_RASTER_CTRL_REG); + reg_ras &= ~LCD_PL_ENABLE; + lcdc_write(reg_ras, LCD_RASTER_CTRL_REG); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + } else { + lcdc_write(stat, LCD_STAT_REG); + + if (stat & LCD_END_OF_FRAME0) { + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_0_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + + if (stat & LCD_END_OF_FRAME1) { + lcdc_write(par->dma_start, + LCD_DMA_FRM_BUF_BASE_ADDR_1_REG); + lcdc_write(par->dma_end, + LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG); + par->vsync_flag = 1; + wake_up_interruptible(&par->vsync_wait); + } + } + return IRQ_HANDLED; } @@ -654,9 +737,10 @@ static int __devexit fb_remove(struct platform_device *dev) unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); - dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - info->screen_base - PAGE_SIZE, - info->fix.smem_start); + dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, + par->p_palette_base); + dma_free_coherent(NULL, par->vram_size, par->vram_virt, + par->vram_phys); free_irq(par->irq, par); clk_disable(par->lcdc_clk); clk_put(par->lcdc_clk); @@ -668,6 +752,39 @@ static int __devexit fb_remove(struct platform_device *dev) return 0; } +/* + * Function to wait for vertical sync which for this LCD peripheral + * translates into waiting for the current raster frame to complete. + */ +static int fb_wait_for_vsync(struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + int ret; + + /* + * Set flag to 0 and wait for isr to set to 1. It would seem there is a + * race condition here where the ISR could have occured just before or + * just after this set. But since we are just coarsely waiting for + * a frame to complete then that's OK. i.e. if the frame completed + * just before this code executed then we have to wait another full + * frame time but there is no way to avoid such a situation. On the + * other hand if the frame completed just after then we don't need + * to wait long at all. Either way we are guaranteed to return to the + * user immediately after a frame completion which is all that is + * required. + */ + par->vsync_flag = 0; + ret = wait_event_interruptible_timeout(par->vsync_wait, + par->vsync_flag != 0, + par->vsync_timeout); + if (ret < 0) + return ret; + if (ret == 0) + return -ETIMEDOUT; + + return 0; +} + static int fb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg) { @@ -697,6 +814,8 @@ static int fb_ioctl(struct fb_info *info, unsigned int cmd, sync_arg.pulse_width, sync_arg.front_porch); break; + case FBIO_WAITFORVSYNC: + return fb_wait_for_vsync(info); default: return -EINVAL; } @@ -732,10 +851,47 @@ static int cfb_blank(int blank, struct fb_info *info) return ret; } +/* + * Set new x,y offsets in the virtual display for the visible area and switch + * to the new mode. + */ +static int da8xx_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + int ret = 0; + struct fb_var_screeninfo new_var; + struct da8xx_fb_par *par = fbi->par; + struct fb_fix_screeninfo *fix = &fbi->fix; + unsigned int end; + unsigned int start; + + if (var->xoffset != fbi->var.xoffset || + var->yoffset != fbi->var.yoffset) { + memcpy(&new_var, &fbi->var, sizeof(new_var)); + new_var.xoffset = var->xoffset; + new_var.yoffset = var->yoffset; + if (fb_check_var(&new_var, fbi)) + ret = -EINVAL; + else { + memcpy(&fbi->var, &new_var, sizeof(new_var)); + + start = fix->smem_start + + new_var.yoffset * fix->line_length + + new_var.xoffset * var->bits_per_pixel / 8; + end = start + var->yres * fix->line_length - 1; + par->dma_start = start; + par->dma_end = end; + } + } + + return ret; +} + static struct fb_ops da8xx_fb_ops = { .owner = THIS_MODULE, .fb_check_var = fb_check_var, .fb_setcolreg = fb_setcolreg, + .fb_pan_display = da8xx_pan_display, .fb_ioctl = fb_ioctl, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, @@ -829,40 +985,53 @@ static int __init fb_probe(struct platform_device *device) } /* allocate frame buffer */ - da8xx_fb_info->screen_base = dma_alloc_coherent(NULL, - par->databuf_sz + PAGE_SIZE, - (resource_size_t *) - &da8xx_fb_info->fix.smem_start, - GFP_KERNEL | GFP_DMA); - - if (!da8xx_fb_info->screen_base) { + par->vram_size = lcdc_info->width * lcdc_info->height * lcd_cfg->bpp; + par->vram_size = PAGE_ALIGN(par->vram_size/8); + par->vram_size = par->vram_size * LCD_NUM_BUFFERS; + + par->vram_virt = dma_alloc_coherent(NULL, + par->vram_size, + (resource_size_t *) &par->vram_phys, + GFP_KERNEL | GFP_DMA); + if (!par->vram_virt) { dev_err(&device->dev, "GLCD: kmalloc for frame buffer failed\n"); ret = -EINVAL; goto err_release_fb; } - /* move palette base pointer by (PAGE_SIZE - palette_sz) bytes */ - par->v_palette_base = da8xx_fb_info->screen_base + - (PAGE_SIZE - par->palette_sz); - par->p_palette_base = da8xx_fb_info->fix.smem_start + - (PAGE_SIZE - par->palette_sz); - - /* the rest of the frame buffer is pixel data */ - da8xx_fb_info->screen_base = par->v_palette_base + par->palette_sz; - da8xx_fb_fix.smem_start = par->p_palette_base + par->palette_sz; - da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz; - da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8; + da8xx_fb_info->screen_base = (char __iomem *) par->vram_virt; + da8xx_fb_fix.smem_start = par->vram_phys; + da8xx_fb_fix.smem_len = par->vram_size; + da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8; + + par->dma_start = par->vram_phys; + par->dma_end = par->dma_start + lcdc_info->height * + da8xx_fb_fix.line_length - 1; + + /* allocate palette buffer */ + par->v_palette_base = dma_alloc_coherent(NULL, + PALETTE_SIZE, + (resource_size_t *) + &par->p_palette_base, + GFP_KERNEL | GFP_DMA); + if (!par->v_palette_base) { + dev_err(&device->dev, + "GLCD: kmalloc for palette buffer failed\n"); + ret = -EINVAL; + goto err_release_fb_mem; + } + memset(par->v_palette_base, 0, PALETTE_SIZE); par->irq = platform_get_irq(device, 0); if (par->irq < 0) { ret = -ENOENT; - goto err_release_fb_mem; + goto err_release_pl_mem; } ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par); if (ret) - goto err_release_fb_mem; + goto err_release_pl_mem; /* Initialize par */ da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp; @@ -870,8 +1039,8 @@ static int __init fb_probe(struct platform_device *device) da8xx_fb_var.xres = lcdc_info->width; da8xx_fb_var.xres_virtual = lcdc_info->width; - da8xx_fb_var.yres = lcdc_info->height; - da8xx_fb_var.yres_virtual = lcdc_info->height; + da8xx_fb_var.yres = lcdc_info->height; + da8xx_fb_var.yres_virtual = lcdc_info->height * LCD_NUM_BUFFERS; da8xx_fb_var.grayscale = lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; @@ -892,18 +1061,18 @@ static int __init fb_probe(struct platform_device *device) ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); if (ret) goto err_free_irq; - - /* First palette_sz byte of the frame buffer is the palette */ da8xx_fb_info->cmap.len = par->palette_sz; - /* Flush the buffer to the screen. */ - lcd_blit(LOAD_DATA, par); - /* initialize var_screeninfo */ da8xx_fb_var.activate = FB_ACTIVATE_FORCE; fb_set_var(da8xx_fb_info, &da8xx_fb_var); dev_set_drvdata(&device->dev, da8xx_fb_info); + + /* initialize the vsync wait queue */ + init_waitqueue_head(&par->vsync_wait); + par->vsync_timeout = HZ / 5; + /* Register the Frame Buffer */ if (register_framebuffer(da8xx_fb_info) < 0) { dev_err(&device->dev, @@ -919,10 +1088,6 @@ static int __init fb_probe(struct platform_device *device) goto err_cpu_freq; } #endif - - /* enable raster engine */ - lcd_enable_raster(); - return 0; #ifdef CONFIG_CPU_FREQ @@ -936,10 +1101,12 @@ err_dealloc_cmap: err_free_irq: free_irq(par->irq, par); +err_release_pl_mem: + dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base, + par->p_palette_base); + err_release_fb_mem: - dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - da8xx_fb_info->screen_base - PAGE_SIZE, - da8xx_fb_info->fix.smem_start); + dma_free_coherent(NULL, par->vram_size, par->vram_virt, par->vram_phys); err_release_fb: framebuffer_release(da8xx_fb_info); -- cgit v1.2.3-70-g09d2