From 230ffc8e348e7841b79fd7c659d16aa5d7ec8a69 Mon Sep 17 00:00:00 2001 From: Semih Hazar Date: Tue, 22 May 2007 23:35:12 -0400 Subject: Input: ads7846 - SPI_CPHA mode bugfix In commit [1] the SPI mode is set to 1, but it should be 0. As stated in the commit, ads784x samples the data on the rising edge. SPI mode 1 samples on the falling edge [2] though. The root cause of this is a bug in the omap_uwire code, which treats CPHA=1 incorrectly; so these two bugs cancel each other out on one of the main regression test platforms for this driver. [1] kernel.org GIT 7937e86a70235e1584486654687dc9908a11e00a [2] http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index b0110fe65da..1c9069cd3ba 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -848,7 +848,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) * may not. So we stick to very-portable 8 bit words, both RX and TX. */ spi->bits_per_word = 8; - spi->mode = SPI_MODE_1; + spi->mode = SPI_MODE_0; err = spi_setup(spi); if (err < 0) return err; -- cgit v1.2.3-70-g09d2