From a4e137ab1447fc5009f21e257971aa60a9ec98fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:06:59 +0100 Subject: [MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King --- drivers/Kconfig | 2 + drivers/Makefile | 2 +- drivers/mfd/Kconfig | 10 ++ drivers/mfd/Makefile | 5 + drivers/mfd/mcp-core.c | 255 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/mcp.h | 66 +++++++++++++ 6 files changed, 339 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/Kconfig create mode 100644 drivers/mfd/Makefile create mode 100644 drivers/mfd/mcp-core.c create mode 100644 drivers/mfd/mcp.h (limited to 'drivers') diff --git a/drivers/Kconfig b/drivers/Kconfig index cecab0acc3f..46d655fab11 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -48,6 +48,8 @@ source "drivers/hwmon/Kconfig" source "drivers/misc/Kconfig" +source "drivers/mfd/Kconfig" + source "drivers/media/Kconfig" source "drivers/video/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 126a851d565..9663132ed82 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_FB_INTEL) += video/intelfb/ obj-$(CONFIG_SERIO) += input/serio/ obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ -obj-y += base/ block/ misc/ net/ media/ +obj-y += base/ block/ misc/ mfd/ net/ media/ obj-$(CONFIG_NUBUS) += nubus/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_PPC_PMAC) += macintosh/ diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig new file mode 100644 index 00000000000..e7d1f31aaff --- /dev/null +++ b/drivers/mfd/Kconfig @@ -0,0 +1,10 @@ +# +# Multifunction miscellaneous devices +# + +menu "Multimedia Capabilities Port drivers" + +config MCP + tristate + +endmenu diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile new file mode 100644 index 00000000000..ff31f281e28 --- /dev/null +++ b/drivers/mfd/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for multifunction miscellaneous devices +# + +obj-$(CONFIG_MCP) += mcp-core.o diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c new file mode 100644 index 00000000000..c75d713c01e --- /dev/null +++ b/drivers/mfd/mcp-core.c @@ -0,0 +1,255 @@ +/* + * linux/drivers/mfd/mcp-core.c + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * Generic MCP (Multimedia Communications Port) layer. All MCP locking + * is solely held within this file. + */ +#include +#include +#include +#include +#include + +#include +#include + +#include "mcp.h" + +#define to_mcp(d) container_of(d, struct mcp, attached_device) +#define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) + +static int mcp_bus_match(struct device *dev, struct device_driver *drv) +{ + return 1; +} + +static int mcp_bus_probe(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + return drv->probe(mcp); +} + +static int mcp_bus_remove(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + drv->remove(mcp); + return 0; +} + +static int mcp_bus_suspend(struct device *dev, pm_message_t state) +{ + struct mcp *mcp = to_mcp(dev); + int ret = 0; + + if (dev->driver) { + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + ret = drv->suspend(mcp, state); + } + return ret; +} + +static int mcp_bus_resume(struct device *dev) +{ + struct mcp *mcp = to_mcp(dev); + int ret = 0; + + if (dev->driver) { + struct mcp_driver *drv = to_mcp_driver(dev->driver); + + ret = drv->resume(mcp); + } + return ret; +} + +static struct bus_type mcp_bus_type = { + .name = "mcp", + .match = mcp_bus_match, + .suspend = mcp_bus_suspend, + .resume = mcp_bus_resume, +}; + +/** + * mcp_set_telecom_divisor - set the telecom divisor + * @mcp: MCP interface structure + * @div: SIB clock divisor + * + * Set the telecom divisor on the MCP interface. The resulting + * sample rate is SIBCLOCK/div. + */ +void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div) +{ + spin_lock_irq(&mcp->lock); + mcp->ops->set_telecom_divisor(mcp, div); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_set_telecom_divisor); + +/** + * mcp_set_audio_divisor - set the audio divisor + * @mcp: MCP interface structure + * @div: SIB clock divisor + * + * Set the audio divisor on the MCP interface. + */ +void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div) +{ + spin_lock_irq(&mcp->lock); + mcp->ops->set_audio_divisor(mcp, div); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_set_audio_divisor); + +/** + * mcp_reg_write - write a device register + * @mcp: MCP interface structure + * @reg: 4-bit register index + * @val: 16-bit data value + * + * Write a device register. The MCP interface must be enabled + * to prevent this function hanging. + */ +void mcp_reg_write(struct mcp *mcp, unsigned int reg, unsigned int val) +{ + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); + mcp->ops->reg_write(mcp, reg, val); + spin_unlock_irqrestore(&mcp->lock, flags); +} +EXPORT_SYMBOL(mcp_reg_write); + +/** + * mcp_reg_read - read a device register + * @mcp: MCP interface structure + * @reg: 4-bit register index + * + * Read a device register and return its value. The MCP interface + * must be enabled to prevent this function hanging. + */ +unsigned int mcp_reg_read(struct mcp *mcp, unsigned int reg) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&mcp->lock, flags); + val = mcp->ops->reg_read(mcp, reg); + spin_unlock_irqrestore(&mcp->lock, flags); + + return val; +} +EXPORT_SYMBOL(mcp_reg_read); + +/** + * mcp_enable - enable the MCP interface + * @mcp: MCP interface to enable + * + * Enable the MCP interface. Each call to mcp_enable will need + * a corresponding call to mcp_disable to disable the interface. + */ +void mcp_enable(struct mcp *mcp) +{ + spin_lock_irq(&mcp->lock); + if (mcp->use_count++ == 0) + mcp->ops->enable(mcp); + spin_unlock_irq(&mcp->lock); +} +EXPORT_SYMBOL(mcp_enable); + +/** + * mcp_disable - disable the MCP interface + * @mcp: MCP interface to disable + * + * Disable the MCP interface. The MCP interface will only be + * disabled once the number of calls to mcp_enable matches the + * number of calls to mcp_disable. + */ +void mcp_disable(struct mcp *mcp) +{ + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); + if (--mcp->use_count == 0) + mcp->ops->disable(mcp); + spin_unlock_irqrestore(&mcp->lock, flags); +} +EXPORT_SYMBOL(mcp_disable); + +static void mcp_release(struct device *dev) +{ + struct mcp *mcp = container_of(dev, struct mcp, attached_device); + + kfree(mcp); +} + +struct mcp *mcp_host_alloc(struct device *parent, size_t size) +{ + struct mcp *mcp; + + mcp = kmalloc(sizeof(struct mcp) + size, GFP_KERNEL); + if (mcp) { + memset(mcp, 0, sizeof(struct mcp) + size); + spin_lock_init(&mcp->lock); + mcp->attached_device.parent = parent; + mcp->attached_device.bus = &mcp_bus_type; + mcp->attached_device.dma_mask = parent->dma_mask; + mcp->attached_device.release = mcp_release; + } + return mcp; +} +EXPORT_SYMBOL(mcp_host_alloc); + +int mcp_host_register(struct mcp *mcp) +{ + strcpy(mcp->attached_device.bus_id, "mcp0"); + return device_register(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_register); + +void mcp_host_unregister(struct mcp *mcp) +{ + device_unregister(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_unregister); + +int mcp_driver_register(struct mcp_driver *mcpdrv) +{ + mcpdrv->drv.bus = &mcp_bus_type; + mcpdrv->drv.probe = mcp_bus_probe; + mcpdrv->drv.remove = mcp_bus_remove; + return driver_register(&mcpdrv->drv); +} +EXPORT_SYMBOL(mcp_driver_register); + +void mcp_driver_unregister(struct mcp_driver *mcpdrv) +{ + driver_unregister(&mcpdrv->drv); +} +EXPORT_SYMBOL(mcp_driver_unregister); + +static int __init mcp_init(void) +{ + return bus_register(&mcp_bus_type); +} + +static void __exit mcp_exit(void) +{ + bus_unregister(&mcp_bus_type); +} + +module_init(mcp_init); +module_exit(mcp_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("Core multimedia communications port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h new file mode 100644 index 00000000000..c093a93b880 --- /dev/null +++ b/drivers/mfd/mcp.h @@ -0,0 +1,66 @@ +/* + * linux/drivers/mfd/mcp.h + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef MCP_H +#define MCP_H + +struct mcp_ops; + +struct mcp { + struct module *owner; + struct mcp_ops *ops; + spinlock_t lock; + int use_count; + unsigned int sclk_rate; + unsigned int rw_timeout; + dma_device_t dma_audio_rd; + dma_device_t dma_audio_wr; + dma_device_t dma_telco_rd; + dma_device_t dma_telco_wr; + struct device attached_device; +}; + +struct mcp_ops { + void (*set_telecom_divisor)(struct mcp *, unsigned int); + void (*set_audio_divisor)(struct mcp *, unsigned int); + void (*reg_write)(struct mcp *, unsigned int, unsigned int); + unsigned int (*reg_read)(struct mcp *, unsigned int); + void (*enable)(struct mcp *); + void (*disable)(struct mcp *); +}; + +void mcp_set_telecom_divisor(struct mcp *, unsigned int); +void mcp_set_audio_divisor(struct mcp *, unsigned int); +void mcp_reg_write(struct mcp *, unsigned int, unsigned int); +unsigned int mcp_reg_read(struct mcp *, unsigned int); +void mcp_enable(struct mcp *); +void mcp_disable(struct mcp *); +#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) + +struct mcp *mcp_host_alloc(struct device *, size_t); +int mcp_host_register(struct mcp *); +void mcp_host_unregister(struct mcp *); + +struct mcp_driver { + struct device_driver drv; + int (*probe)(struct mcp *); + void (*remove)(struct mcp *); + int (*suspend)(struct mcp *, pm_message_t); + int (*resume)(struct mcp *); +}; + +int mcp_driver_register(struct mcp_driver *); +void mcp_driver_unregister(struct mcp_driver *); + +#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) +#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) + +#define mcp_priv(mcp) ((void *)((mcp)+1)) + +#endif -- cgit v1.2.3-70-g09d2 From 5e742ad66b4a8ba6f9d729660f822676d9e405d4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:08:15 +0100 Subject: [MFD] Add SA11x0 MCP support This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King --- drivers/mfd/Kconfig | 6 ++ drivers/mfd/Makefile | 1 + drivers/mfd/mcp-sa11x0.c | 275 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 282 insertions(+) create mode 100644 drivers/mfd/mcp-sa11x0.c (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e7d1f31aaff..1588a59e376 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -7,4 +7,10 @@ menu "Multimedia Capabilities Port drivers" config MCP tristate +# Interface drivers +config MCP_SA11X0 + tristate "Support SA11x0 MCP interface" + depends on ARCH_SA1100 + select MCP + endmenu diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ff31f281e28..98bdd6a4218 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_MCP) += mcp-core.o +obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c new file mode 100644 index 00000000000..25699fa37fe --- /dev/null +++ b/drivers/mfd/mcp-sa11x0.c @@ -0,0 +1,275 @@ +/* + * linux/drivers/mfd/mcp-sa11x0.c + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * SA11x0 MCP (Multimedia Communications Port) driver. + * + * MCP read/write timeouts from Jordi Colomer, rehacked by rmk. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "mcp.h" + +struct mcp_sa11x0 { + u32 mccr0; + u32 mccr1; +}; + +#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) + +static void +mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x00007f00; + mccr0 |= divisor << 8; + Ser4MCCR0 = mccr0; +} + +static void +mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x0000007f; + mccr0 |= divisor; + Ser4MCCR0 = mccr0; +} + +/* + * Write data to the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static void +mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CWC) { + ret = 0; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: write timed out\n"); +} + +/* + * Read data from the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static unsigned int +mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Rd; + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CRC) { + ret = Ser4MCDR2 & 0xffff; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: read timed out\n"); + + return ret; +} + +static void mcp_sa11x0_enable(struct mcp *mcp) +{ + Ser4MCSR = -1; + Ser4MCCR0 |= MCCR0_MCE; +} + +static void mcp_sa11x0_disable(struct mcp *mcp) +{ + Ser4MCCR0 &= ~MCCR0_MCE; +} + +/* + * Our methods. + */ +static struct mcp_ops mcp_sa11x0 = { + .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor, + .set_audio_divisor = mcp_sa11x0_set_audio_divisor, + .reg_write = mcp_sa11x0_write, + .reg_read = mcp_sa11x0_read, + .enable = mcp_sa11x0_enable, + .disable = mcp_sa11x0_disable, +}; + +static int mcp_sa11x0_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mcp *mcp; + int ret; + + if (!machine_is_adsbitsy() && !machine_is_assabet() && + !machine_is_cerf() && !machine_is_flexanet() && + !machine_is_freebird() && !machine_is_graphicsclient() && + !machine_is_graphicsmaster() && !machine_is_lart() && + !machine_is_omnimeter() && !machine_is_pfs168() && + !machine_is_shannon() && !machine_is_simpad() && + !machine_is_yopy()) + return -ENODEV; + + if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) + return -EBUSY; + + mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); + if (!mcp) { + ret = -ENOMEM; + goto release; + } + + mcp->owner = THIS_MODULE; + mcp->ops = &mcp_sa11x0; + mcp->sclk_rate = 11981000, + mcp->dma_audio_rd = DMA_Ser4MCP0Rd; + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + + dev_set_drvdata(dev, mcp); + + if (machine_is_assabet()) { + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + } + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + + Ser4MCSR = -1; + Ser4MCCR1 = 0; + Ser4MCCR0 = 0x00007f7f | MCCR0_ADM; + + /* + * Calculate the read/write timeout (us) from the bit clock + * rate. This is the period for 3 64-bit frames. Always + * round this time up. + */ + mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / + mcp->sclk_rate; + + ret = mcp_host_register(mcp); + if (ret == 0) + goto out; + + release: + release_mem_region(0x80060000, 0x60); + dev_set_drvdata(dev, NULL); + + out: + return ret; +} + +static int mcp_sa11x0_remove(struct device *dev) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + mcp_host_unregister(mcp); + release_mem_region(0x80060000, 0x60); + + return 0; +} + +static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + if (level == SUSPEND_DISABLE) { + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; + } + return 0; +} + +static int mcp_sa11x0_resume(struct device *dev, u32 level) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + if (level == RESUME_RESTORE_STATE) { + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; + } + return 0; +} + +/* + * The driver for the SA11x0 MCP port. + */ +static struct device_driver mcp_sa11x0_driver = { + .name = "sa11x0-mcp", + .bus = &platform_bus_type, + .probe = mcp_sa11x0_probe, + .remove = mcp_sa11x0_remove, + .suspend = mcp_sa11x0_suspend, + .resume = mcp_sa11x0_resume, +}; + +/* + * This needs re-working + */ +static int __init mcp_sa11x0_init(void) +{ + return driver_register(&mcp_sa11x0_driver); +} + +static void __exit mcp_sa11x0_exit(void) +{ + driver_unregister(&mcp_sa11x0_driver); +} + +module_init(mcp_sa11x0_init); +module_exit(mcp_sa11x0_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("SA11x0 multimedia communications port driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 323cdfc191b7c1597dc748175062c368568d6af4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 18 Aug 2005 10:10:46 +0100 Subject: [MFD] Add SA11x0 MCP platform device support Add platform device data for the SA11x0 MCP device. This allows platforms to customise the configuration of the SA11x0 MCP device according to their needs. Signed-off-by: Russell King --- arch/arm/mach-sa1100/assabet.c | 7 +++++++ arch/arm/mach-sa1100/cerf.c | 7 +++++++ arch/arm/mach-sa1100/generic.c | 5 +++++ arch/arm/mach-sa1100/generic.h | 3 +++ arch/arm/mach-sa1100/lart.c | 12 ++++++++++++ arch/arm/mach-sa1100/shannon.c | 7 +++++++ arch/arm/mach-sa1100/simpad.c | 7 +++++++ drivers/mfd/mcp-sa11x0.c | 20 ++++++++++---------- include/asm-arm/arch-sa1100/mcp.h | 21 +++++++++++++++++++++ 9 files changed, 79 insertions(+), 10 deletions(-) create mode 100644 include/asm-arm/arch-sa1100/mcp.h (limited to 'drivers') diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 4d4d303ee3a..24687f511bf 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "generic.h" @@ -198,6 +199,11 @@ static struct irda_platform_data assabet_irda_data = { .set_speed = assabet_irda_set_speed, }; +static struct mcp_plat_data assabet_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init assabet_init(void) { /* @@ -246,6 +252,7 @@ static void __init assabet_init(void) sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_set_irda_data(&assabet_irda_data); + sa11x0_set_mcp_data(&assabet_mcp_data); } /* diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 0aa918e24c3..9484be7dc67 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -29,6 +29,7 @@ #include #include +#include #include "generic.h" static struct resource cerfuart2_resources[] = { @@ -116,10 +117,16 @@ static void __init cerf_map_io(void) GPDR |= CERF_GPIO_CF_RESET; } +static struct mcp_plat_data cerf_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1); + sa11x0_set_mcp_data(&cerf_mcp_data); } MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 95ae217be1b..3f1e358455e 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -221,6 +221,11 @@ static struct platform_device sa11x0mcp_device = { .resource = sa11x0mcp_resources, }; +void sa11x0_set_mcp_data(struct mcp_plat_data *data) +{ + sa11x0mcp_device.dev.platform_data = data; +} + static struct resource sa11x0ssp_resources[] = { [0] = { .start = 0x80070000, diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index bfe41da9923..279e3afa3c3 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -34,5 +34,8 @@ struct resource; extern void sa11x0_set_flash_data(struct flash_platform_data *flash, struct resource *res, int nr); +struct sa11x0_ssp_plat_ops; +extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops); + struct irda_platform_data; void sa11x0_set_irda_data(struct irda_platform_data *irda); diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 870b488aeda..ed6744d480a 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -13,12 +13,23 @@ #include #include #include +#include #include "generic.h" #warning "include/asm/arch-sa1100/ide.h needs fixing for lart" +static struct mcp_plat_data lart_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + +static void __init lart_init(void) +{ + sa11x0_set_mcp_data(&lart_mcp_data); +} + static struct map_desc lart_io_desc[] __initdata = { /* virtual physical length type */ { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */ @@ -47,5 +58,6 @@ MACHINE_START(LART, "LART") .boot_params = 0xc0000100, .map_io = lart_map_io, .init_irq = sa1100_init_irq, + .init_machine = lart_init, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 43a00359fcd..7482288278d 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include "generic.h" @@ -52,9 +53,15 @@ static struct resource shannon_flash_resource = { .flags = IORESOURCE_MEM, }; +static struct mcp_plat_data shannon_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init shannon_init(void) { sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1); + sa11x0_set_mcp_data(&shannon_mcp_data); } static void __init shannon_map_io(void) diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 77978586b12..07f6d5fd7bb 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -123,6 +124,11 @@ static struct resource simpad_flash_resources [] = { } }; +static struct mcp_plat_data simpad_mcp_data = { + .mccr0 = MCCR0_ADM, + .sclk_rate = 11981000, +}; + static void __init simpad_map_io(void) @@ -157,6 +163,7 @@ static void __init simpad_map_io(void) sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); + sa11x0_set_mcp_data(&simpad_mcp_data); } static void simpad_power_off(void) diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 25699fa37fe..e9806fbbe69 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -140,16 +141,11 @@ static struct mcp_ops mcp_sa11x0 = { static int mcp_sa11x0_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + struct mcp_plat_data *data = pdev->dev.platform_data; struct mcp *mcp; int ret; - if (!machine_is_adsbitsy() && !machine_is_assabet() && - !machine_is_cerf() && !machine_is_flexanet() && - !machine_is_freebird() && !machine_is_graphicsclient() && - !machine_is_graphicsmaster() && !machine_is_lart() && - !machine_is_omnimeter() && !machine_is_pfs168() && - !machine_is_shannon() && !machine_is_simpad() && - !machine_is_yopy()) + if (!data) return -ENODEV; if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) @@ -163,7 +159,7 @@ static int mcp_sa11x0_probe(struct device *dev) mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; - mcp->sclk_rate = 11981000, + mcp->sclk_rate = data->sclk_rate; mcp->dma_audio_rd = DMA_Ser4MCP0Rd; mcp->dma_audio_wr = DMA_Ser4MCP0Wr; mcp->dma_telco_rd = DMA_Ser4MCP1Rd; @@ -184,9 +180,13 @@ static int mcp_sa11x0_probe(struct device *dev) PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + /* + * Initialise device. Note that we initially + * set the sampling rate to minimum. + */ Ser4MCSR = -1; - Ser4MCCR1 = 0; - Ser4MCCR0 = 0x00007f7f | MCCR0_ADM; + Ser4MCCR1 = data->mccr1; + Ser4MCCR0 = data->mccr0 | 0x7f7f; /* * Calculate the read/write timeout (us) from the bit clock diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h new file mode 100644 index 00000000000..f58a22755c6 --- /dev/null +++ b/include/asm-arm/arch-sa1100/mcp.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-sa1100/mcp.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ARCH_MCP_H +#define __ASM_ARM_ARCH_MCP_H + +#include + +struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; +}; + +#endif -- cgit v1.2.3-70-g09d2