From 2c66851460c9438823e39b76887376d1511fb67c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 22 Jul 2005 16:26:07 -0700 Subject: [PATCH] skge: whitespace fixes Minor whitespace cleanups. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 6 +++--- drivers/net/skge.h | 20 ++++++++++---------- 2 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 0857be8f99f..6b04b89cbb4 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -248,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else { u32 setting; - switch(ecmd->speed) { + switch (ecmd->speed) { case SPEED_1000: if (ecmd->duplex == DUPLEX_FULL) setting = SUPPORTED_1000baseT_Full; @@ -1026,7 +1026,7 @@ static void bcom_check_link(struct skge_hw *hw, int port) } /* Check Duplex mismatch */ - switch(aux & PHY_B_AS_AN_RES_MSK) { + switch (aux & PHY_B_AS_AN_RES_MSK) { case PHY_B_RES_1000FD: skge->duplex = DUPLEX_FULL; break; @@ -1097,7 +1097,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo) r |= XM_MMU_NO_PRE; xm_write16(hw, port, XM_MMU_CMD,r); - switch(id1) { + switch (id1) { case PHY_BCOM_ID1_C0: /* * Workaround BCOM Errata for the C0 type. diff --git a/drivers/net/skge.h b/drivers/net/skge.h index fced3d2bc07..2086809f4b0 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -1509,7 +1509,7 @@ enum { PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ }; -#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK) +#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) enum { PULS_NO_STR = 0,/* no pulse stretching */ @@ -1522,7 +1522,7 @@ enum { PULS_1300MS = 7,/* 1.3 s to 2.7 s */ }; -#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK) +#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) enum { BLINK_42MS = 0,/* 42 ms */ @@ -1602,9 +1602,9 @@ enum { PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ }; -#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK) -#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK) -#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK) +#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK) enum { LED_PAR_CTRL_COLX = 0x00, @@ -1640,7 +1640,7 @@ enum { PHY_M_MAC_MD_COPPER = 5,/* Copper only */ PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ }; -#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK) +#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK) /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ enum { @@ -1650,10 +1650,10 @@ enum { PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ }; -#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK) -#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK) -#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK) -#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK) +#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK) /* GMAC registers */ /* Port Registers */ -- cgit v1.2.3-70-g09d2