From 2da8cb6af5fe0d9e16b8a49399c8b7c6cfa94d5a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Fri, 30 Apr 2010 13:21:26 +0000 Subject: powerpc/mpc5121: move PSC FIFO memory init to platform code Since PSC could also be used in other modes than UART mode we move PSC FIFO memory initialization from serial driver to common platform code. The initialized FIFO memory slices may not overlap, so the most easy way would be to configure them all at once at init time for all PSC devices. This is now done by this patch. Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- drivers/serial/mpc52xx_uart.c | 69 ------------------------------------------- 1 file changed, 69 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 02469c31bf0..f0ca448a1eb 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -397,34 +397,10 @@ static unsigned long mpc512x_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p); } -#define DEFAULT_FIFO_SIZE 16 - -static unsigned int __init get_fifo_size(struct device_node *np, - char *fifo_name) -{ - const unsigned int *fp; - - fp = of_get_property(np, fifo_name, NULL); - if (fp) - return *fp; - - pr_warning("no %s property in %s node, defaulting to %d\n", - fifo_name, np->full_name, DEFAULT_FIFO_SIZE); - - return DEFAULT_FIFO_SIZE; -} - -#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \ - ((u32)(_base) + sizeof(struct mpc52xx_psc))) - /* Init PSC FIFO Controller */ static int __init mpc512x_psc_fifoc_init(void) { struct device_node *np; - void __iomem *psc; - unsigned int tx_fifo_size; - unsigned int rx_fifo_size; - int fifobase = 0; /* current fifo address in 32 bit words */ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-psc-fifo"); @@ -447,51 +423,6 @@ static int __init mpc512x_psc_fifoc_init(void) return -ENODEV; } - for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") { - tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); - rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); - - /* size in register is in 4 byte units */ - tx_fifo_size /= 4; - rx_fifo_size /= 4; - if (!tx_fifo_size) - tx_fifo_size = 1; - if (!rx_fifo_size) - rx_fifo_size = 1; - - psc = of_iomap(np, 0); - if (!psc) { - pr_err("%s: Can't map %s device\n", - __func__, np->full_name); - continue; - } - - /* FIFO space is 4KiB, check if requested size is available */ - if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) { - pr_err("%s: no fifo space available for %s\n", - __func__, np->full_name); - iounmap(psc); - /* - * chances are that another device requests less - * fifo space, so we continue. - */ - continue; - } - /* set tx and rx fifo size registers */ - out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size); - fifobase += tx_fifo_size; - out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size); - fifobase += rx_fifo_size; - - /* reset and enable the slices */ - out_be32(&FIFOC(psc)->txcmd, 0x80); - out_be32(&FIFOC(psc)->txcmd, 0x01); - out_be32(&FIFOC(psc)->rxcmd, 0x80); - out_be32(&FIFOC(psc)->rxcmd, 0x01); - - iounmap(psc); - } - return 0; } -- cgit v1.2.3-70-g09d2