From 4349d5cdf28d46c22d467079e80ee9695dcec0ad Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 9 Nov 2005 22:47:18 +0100 Subject: [PATCH] ide: incorrect device link for ide-cs Devices driven by ide-cs will appear under /sys/devices instead of the appropriate PCMCIA device. To fix this I had to extend the hw_regs_t structure with a 'struct device' field, which allows us to set the parent link for the appropriate hwif. Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 1 + drivers/ide/legacy/ide-cs.c | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 9fe19808d81..8af179b531c 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -803,6 +803,7 @@ found: hwif->irq = hw->irq; hwif->noprobe = 0; hwif->chipset = hw->chipset; + hwif->gendev.parent = hw->dev; if (!initializing) { probe_hwif_init_with_fixup(hwif, fixup); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 1dafffa7e51..ef79805218e 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -182,13 +182,14 @@ static void ide_detach(dev_link_t *link) } /* ide_detach */ -static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq) +static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { hw_regs_t hw; memset(&hw, 0, sizeof(hw)); ide_init_hwif_ports(&hw, io, ctl, NULL); hw.irq = irq; hw.chipset = ide_pci; + hw.dev = &handle->dev; return ide_register_hw_with_fixup(&hw, NULL, ide_undecoded_slave); } @@ -327,12 +328,12 @@ static void ide_config(dev_link_t *link) /* retry registration in case device is still spinning up */ for (hd = -1, i = 0; i < 10; i++) { - hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ); + hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle); if (hd >= 0) break; if (link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hd = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ); + link->irq.AssignedIRQ, handle); if (hd >= 0) { io_base += 0x10; ctl_base += 0x10; -- cgit v1.2.3-70-g09d2 From e851b620e775c9f0e00b1c7e35072d6b98097cb9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 9 Nov 2005 23:07:56 +0100 Subject: [PATCH] ide: possible cleanups This patch contains the following possible cleanups: - pci/cy82c693.c: make a needlessly global function static - remove the following unneeded EXPORT_SYMBOL's: - ide-taskfile.c: do_rw_taskfile - ide-iops.c: default_hwif_iops - ide-iops.c: default_hwif_transport - ide-iops.c: wait_for_ready Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 6 ------ drivers/ide/ide-taskfile.c | 2 -- drivers/ide/pci/cy82c693.c | 2 +- 3 files changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 0b0aa4f5162..af7af958ab3 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -104,8 +104,6 @@ void default_hwif_iops (ide_hwif_t *hwif) hwif->INSL = ide_insl; } -EXPORT_SYMBOL(default_hwif_iops); - /* * MMIO operations, typically used for SATA controllers */ @@ -329,8 +327,6 @@ void default_hwif_transport(ide_hwif_t *hwif) hwif->atapi_output_bytes = atapi_output_bytes; } -EXPORT_SYMBOL(default_hwif_transport); - /* * Beginning of Taskfile OPCODE Library and feature sets. */ @@ -529,8 +525,6 @@ int wait_for_ready (ide_drive_t *drive, int timeout) return 0; } -EXPORT_SYMBOL(wait_for_ready); - /* * This routine busy-waits for the drive status to be not "busy". * It then checks the status for all of the "good" bits and none diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7ec18fa3b5f..54f9639c2a8 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -161,8 +161,6 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) return ide_stopped; } -EXPORT_SYMBOL(do_rw_taskfile); - /* * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. */ diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 5a33513f3dd..9f41ecd5633 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -469,7 +469,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif) static __devinitdata ide_hwif_t *primary; -void __devinit init_iops_cy82c693(ide_hwif_t *hwif) +static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) { if (PCI_FUNC(hwif->pci_dev->devfn) == 1) primary = hwif; -- cgit v1.2.3-70-g09d2 From 0046b06a367cd853efd3223ce60143f3a7952522 Mon Sep 17 00:00:00 2001 From: Willem Riede Date: Wed, 9 Nov 2005 23:18:22 +0100 Subject: [PATCH] ide: ide-scsi fails to call idescsi_check_condition for things like "Medium not present" This patch started life as a response to fedora specific ide subsystem changes that made error handling of my ATAPI tape drive fail; the specifics are in https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=160868 The insertion of the statement rq->errors = err; near the end of ide_end_drive_cmd() in drivers/ide/ide-io.c means that rq->errors does not contain what it needs to in idescsi_end_request() in drivers/scsi/ide-scsi.c anymore. Recent mainline kernels now also have this change. The patch below makes ide-scsi whole. Signed-off-by: Willem Riede Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c888af4a456..3553da0e1cd 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -395,6 +395,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) int log = test_bit(IDESCSI_LOG_CMD, &scsi->log); struct Scsi_Host *host; u8 *scsi_buf; + int errors = rq->errors; unsigned long flags; if (!(rq->flags & (REQ_SPECIAL|REQ_SENSE))) { @@ -421,11 +422,11 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n", drive->name, pc->scsi_cmd->serial_number); pc->scsi_cmd->result = DID_TIME_OUT << 16; - } else if (rq->errors >= ERROR_MAX) { + } else if (errors >= ERROR_MAX) { pc->scsi_cmd->result = DID_ERROR << 16; if (log) printk ("ide-scsi: %s: I/O error for %lu\n", drive->name, pc->scsi_cmd->serial_number); - } else if (rq->errors) { + } else if (errors) { if (log) printk ("ide-scsi: %s: check condition for %lu\n", drive->name, pc->scsi_cmd->serial_number); if (!idescsi_check_condition(drive, rq)) -- cgit v1.2.3-70-g09d2 From 7fab773de16ccaeb249acdc6e956a9759c68225d Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 9 Nov 2005 23:26:09 +0100 Subject: [PATCH] ide: AMD Geode GX/LX support From: "Jordan Crouse" The core IDE engine on the CS5536 is the same as the other AMD southbridges, so unlike the CS5535, we can simply add the appropriate PCI headers to the existing amd74xx code. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/amd74xx.c | 3 +++ include/linux/pci_ids.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 844a6c9fb94..21965e5ef25 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -74,6 +74,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -491,6 +492,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), + /* 17 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -527,6 +529,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9a96f058839..63dd184ec80 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -487,6 +487,8 @@ #define PCI_DEVICE_ID_AMD_8151_0 0x7454 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7450 +#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A + #define PCI_VENDOR_ID_TRIDENT 0x1023 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 -- cgit v1.2.3-70-g09d2 From f5b2d8b4b5146fa2d70fec7d514fa0bd64636958 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Wed, 9 Nov 2005 23:58:16 +0100 Subject: [PATCH] ide: CS5535 driver Signed-off-by: Jaya Kumar Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 9 ++ drivers/ide/pci/Makefile | 1 + drivers/ide/pci/cs5535.c | 305 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 1 + 4 files changed, 316 insertions(+) create mode 100644 drivers/ide/pci/cs5535.c (limited to 'drivers') diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a737886e39d..42e5b8175cb 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -539,6 +539,15 @@ config BLK_DEV_CS5530 It is safe to say Y to this question. +config BLK_DEV_CS5535 + tristate "AMD CS5535 chipset support" + depends on X86 && !X86_64 + help + Include support for UDMA on the NSC/AMD CS5535 companion chipset. + This will automatically be detected and configured if found. + + It is safe to say Y to this question. + config BLK_DEV_HPT34X tristate "HPT34X chipset support" help diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile index af46226c179..f35d684edc2 100644 --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o +obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c new file mode 100644 index 00000000000..6eb305197f3 --- /dev/null +++ b/drivers/ide/pci/cs5535.c @@ -0,0 +1,305 @@ +/* + * linux/drivers/ide/pci/cs5535.c + * + * Copyright (C) 2004-2005 Advanced Micro Devices, Inc. + * + * History: + * 09/20/2005 - Jaya Kumar + * - Reworked tuneproc, set_drive, misc mods to prep for mainline + * - Work was sponsored by CIS (M) Sdn Bhd. + * Ported to Kernel 2.6.11 on June 26, 2005 by + * Wolfgang Zuleger + * Alexander Kiausch + * Originally developed by AMD for 2.4/2.6 + * + * Development of this chipset driver was funded + * by the nice folks at National Semiconductor/AMD. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Documentation: + * CS5535 documentation available from AMD + */ + +#include +#include +#include +#include + +#include "ide-timing.h" + +#define MSR_ATAC_BASE 0x51300000 +#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) +#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) +#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02) +#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03) +#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04) +#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05) +#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08) +#define ATAC_RESET (MSR_ATAC_BASE+0x10) +#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20) +#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21) +#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22) +#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23) +#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24) +#define ATAC_BM0_CMD_PRIM 0x00 +#define ATAC_BM0_STS_PRIM 0x02 +#define ATAC_BM0_PRD 0x04 +#define CS5535_CABLE_DETECT 0x48 + +/* Format I PIO settings. We seperate out cmd and data for safer timings */ + +static unsigned int cs5535_pio_cmd_timings[5] = +{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 }; +static unsigned int cs5535_pio_dta_timings[5] = +{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 }; + +static unsigned int cs5535_mwdma_timings[3] = +{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 }; + +static unsigned int cs5535_udma_timings[5] = +{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 }; + +/* Macros to check if the register is the reset value - reset value is an + invalid timing and indicates the register has not been set previously */ + +#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 ) +#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 ) + +/**** + * cs5535_set_speed - Configure the chipset to the new speed + * @drive: Drive to set up + * @speed: desired speed + * + * cs5535_set_speed() configures the chipset to a new speed. + */ +static void cs5535_set_speed(ide_drive_t *drive, u8 speed) +{ + + u32 reg = 0, dummy; + int unit = drive->select.b.unit; + + + /* Set the PIO timings */ + if ((speed & XFER_MODE) == XFER_PIO) { + u8 pioa; + u8 piob; + u8 cmd; + + pioa = speed - XFER_PIO_0; + piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]), + 255, 4, NULL); + cmd = pioa < piob ? pioa : piob; + + /* Write the speed of the current drive */ + reg = (cs5535_pio_cmd_timings[cmd] << 16) | + cs5535_pio_dta_timings[pioa]; + wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0); + + /* And if nessesary - change the speed of the other drive */ + rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy); + + if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) != + cs5535_pio_cmd_timings[cmd]) { + reg &= 0x0000FFFF; + reg |= cs5535_pio_cmd_timings[cmd] << 16; + wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0); + } + + /* Set bit 31 of the DMA register for PIO format 1 timings */ + rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); + wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, + reg | 0x80000000UL, 0); + } else { + rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy); + + reg &= 0x80000000UL; /* Preserve the PIO format bit */ + + if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7) + reg |= cs5535_udma_timings[speed - XFER_UDMA_0]; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0]; + else + return; + + wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0); + } +} + +static u8 cs5535_ratemask(ide_drive_t *drive) +{ + /* eighty93 will return 1 if it's 80core and capable of + exceeding udma2, 0 otherwise. we need ratemask to set + the max speed and if we can > udma2 then we return 2 + which selects speed_max as udma4 which is the 5535's max + speed, and 1 selects udma2 which is the max for 40c */ + if (!eighty_ninty_three(drive)) + return 1; + + return 2; +} + + +/**** + * cs5535_set_drive - Configure the drive to the new speed + * @drive: Drive to set up + * @speed: desired speed + * + * cs5535_set_drive() configures the drive and the chipset to a + * new speed. It also can be called by upper layers. + */ +static int cs5535_set_drive(ide_drive_t *drive, u8 speed) +{ + speed = ide_rate_filter(cs5535_ratemask(drive), speed); + ide_config_drive_speed(drive, speed); + cs5535_set_speed(drive, speed); + + return 0; +} + +/**** + * cs5535_tuneproc - PIO setup + * @drive: drive to set up + * @pio: mode to use (255 for 'best possible') + * + * A callback from the upper layers for PIO-only tuning. + */ +static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed) +{ + u8 modes[] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, + XFER_PIO_4 }; + + /* cs5535 max pio is pio 4, best_pio will check the blacklist. + i think we don't need to rate_filter the incoming xferspeed + since we know we're only going to choose pio */ + xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4, NULL); + ide_config_drive_speed(drive, modes[xferspeed]); + cs5535_set_speed(drive, xferspeed); +} + +static int cs5535_config_drive_for_dma(ide_drive_t *drive) +{ + u8 speed; + + speed = ide_dma_speed(drive, cs5535_ratemask(drive)); + + /* If no DMA speed was available then let dma_check hit pio */ + if (!speed) { + return 0; + } + + cs5535_set_drive(drive, speed); + return ide_dma_enable(drive); +} + +static int cs5535_dma_check(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct hd_driveid *id = drive->id; + u8 speed; + + drive->init_speed = 0; + + if ((id->capability & 1) && drive->autodma) { + if (ide_use_dma(drive)) { + if (cs5535_config_drive_for_dma(drive)) + return hwif->ide_dma_on(drive); + } + + goto fast_ata_pio; + + } else if ((id->capability & 8) || (id->field_valid & 2)) { +fast_ata_pio: + speed = ide_get_best_pio_mode(drive, 255, 4, NULL); + cs5535_set_drive(drive, speed); + return hwif->ide_dma_off_quietly(drive); + } + /* IORDY not supported */ + return 0; +} + +static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) +{ + u8 bit; + + /* if a 80 wire cable was detected */ + pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit); + return (bit & 1); +} + +/**** + * init_hwif_cs5535 - Initialize one ide cannel + * @hwif: Channel descriptor + * + * This gets invoked by the IDE driver once for each channel. It + * performs channel-specific pre-initialization before drive probing. + * + */ +static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) +{ + int i; + + hwif->autodma = 0; + + hwif->tuneproc = &cs5535_tuneproc; + hwif->speedproc = &cs5535_set_drive; + hwif->ide_dma_check = &cs5535_dma_check; + + hwif->atapi_dma = 1; + hwif->ultra_mask = 0x1F; + hwif->mwdma_mask = 0x07; + + + hwif->udma_four = cs5535_cable_detect(hwif->pci_dev); + + if (!noautodma) + hwif->autodma = 1; + + /* just setting autotune and not worrying about bios timings */ + for (i = 0; i < 2; i++) { + hwif->drives[i].autotune = 1; + hwif->drives[i].autodma = hwif->autodma; + } +} + +static ide_pci_device_t cs5535_chipset __devinitdata = { + .name = "CS5535", + .init_hwif = init_hwif_cs5535, + .channels = 1, + .autodma = AUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit cs5535_init_one(struct pci_dev *dev, + const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &cs5535_chipset); +} + +static struct pci_device_id cs5535_pci_tbl[] = +{ + { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_IDE, PCI_ANY_ID, + PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl); + +static struct pci_driver driver = { + .name = "CS5535_IDE", + .id_table = cs5535_pci_tbl, + .probe = cs5535_init_one, +}; + +static int __init cs5535_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(cs5535_ide_init); + +MODULE_AUTHOR("AMD"); +MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 63dd184ec80..4e06eb0f445 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -387,6 +387,7 @@ #define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511 #define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515 #define PCI_DEVICE_ID_NS_87410 0xd001 +#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d #define PCI_VENDOR_ID_TSENG 0x100c #define PCI_DEVICE_ID_TSENG_W32P_2 0x3202 -- cgit v1.2.3-70-g09d2 From d868dd19ad0828b1b3b56f3b06bd4a39971847be Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 10 Nov 2005 00:19:14 +0100 Subject: [PATCH] siimage: enable interrupts on Adaptec SA-1210 card The siimage driver proports to support the Adaptec SA-1210 SATA controller. However, at least some of those cards boot-up with their interrupts disabled internally. The siimage driver currently ignores that fact, so that driver does not actually work with those cards. This patch enables those interrupts on cards that need it. [ This is implemented based on similar code in the libata-based sata_sil driver. ] Signed-off-by: John W. Linville Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/siimage.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 2b9961b8813..022d244f2eb 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -701,6 +701,7 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) unsigned long barsize = pci_resource_len(dev, 5); u8 tmpbyte = 0; void __iomem *ioaddr; + u32 tmp, irq_mask; /* * Drop back to PIO if we can't map the mmio. Some @@ -726,6 +727,14 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) pci_set_drvdata(dev, (void *) ioaddr); if (pdev_is_sata(dev)) { + /* make sure IDE0/1 interrupts are not masked */ + irq_mask = (1 << 22) | (1 << 23); + tmp = readl(ioaddr + 0x48); + if (tmp & irq_mask) { + tmp &= ~irq_mask; + writel(tmp, ioaddr + 0x48); + readl(ioaddr + 0x48); /* flush */ + } writel(0, ioaddr + 0x148); writel(0, ioaddr + 0x1C8); } -- cgit v1.2.3-70-g09d2 From 07203f6471a11f4eda48acbe528c0ce4704ad42c Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 10 Nov 2005 00:25:15 +0100 Subject: [PATCH] ide-floppy: software eject not working with LS-120 drive The problem (eject not working on ATAPI LS-120 drive) is caused by idefloppy_ioctl() function which *first* tries generic_ide_ioctl() and *only* if it fails with -EINVAL, proceeds with the specific ioctls. The generic eject command fails with something other than -EINVAL and the specific one is never executed. This patch fixes it by first going through the internal ioctls and only trying generic_ide_ioctl() if none of them matches. Signed-off-by: Ondrej Zary Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e83f54d37f9..f615ab75996 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -2038,11 +2038,9 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file, struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); ide_drive_t *drive = floppy->drive; void __user *argp = (void __user *)arg; - int err = generic_ide_ioctl(drive, file, bdev, cmd, arg); + int err; int prevent = (arg) ? 1 : 0; idefloppy_pc_t pc; - if (err != -EINVAL) - return err; switch (cmd) { case CDROMEJECT: @@ -2094,7 +2092,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file, case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: return idefloppy_get_format_progress(drive, argp); } - return -EINVAL; + return generic_ide_ioctl(drive, file, bdev, cmd, arg); } static int idefloppy_media_changed(struct gendisk *disk) -- cgit v1.2.3-70-g09d2