From 3b86b2028c4de998978baae780edfc36995bebc5 Mon Sep 17 00:00:00 2001
From: Greg KH <gregkh@suse.de>
Date: Mon, 25 Apr 2005 21:46:29 -0700
Subject: [PATCH] USB: add a driver for the AirPrime CDMA Wireless PC card.

Easier than trying to use the generic usb-serial driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/Kconfig    |  9 +++++++
 drivers/usb/serial/Makefile   |  1 +
 drivers/usb/serial/airprime.c | 63 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 73 insertions(+)
 create mode 100644 drivers/usb/serial/airprime.c

(limited to 'drivers')

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 0c4aa00bb39..bc798edf035 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -53,6 +53,15 @@ config USB_SERIAL_GENERIC
 	  support" be compiled as a module for this driver to be used
 	  properly.
 
+config USB_SERIAL_AIRPRIME
+	tristate "USB AirPrime CDMA Wireless Driver"
+	depends on USB_SERIAL
+	help
+	  Say Y here if you want to use a AirPrime CDMA Wireless PC card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called airprime.
+
 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index b0aac47d195..d56ff6d86cc 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -11,6 +11,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB)		+= ezusb.o
 
 usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
+obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
new file mode 100644
index 00000000000..a4ce0008d69
--- /dev/null
+++ b/drivers/usb/serial/airprime.c
@@ -0,0 +1,63 @@
+/*
+ * AirPrime CDMA Wireless Serial USB driver
+ *
+ * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0xf3d, 0x0112) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver airprime_driver = {
+	.owner =	THIS_MODULE,
+	.name =		"airprime",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_device_type airprime_device = {
+	.owner =		THIS_MODULE,
+	.name =			"airprime",
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		1,
+};
+
+static int __init airprime_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&airprime_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&airprime_driver);
+	if (retval)
+		usb_serial_deregister(&airprime_device);
+	return retval;
+}
+
+static void __exit airprime_exit(void)
+{
+	usb_deregister(&airprime_driver);
+	usb_serial_deregister(&airprime_device);
+}
+
+module_init(airprime_init);
+module_exit(airprime_exit);
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-70-g09d2