From 4f14faaab4ee46a046b6baff85644be199de718c Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Mon, 28 Nov 2011 11:49:03 -0500 Subject: xen/blkback: use grant-table.c hypercall wrappers Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/blkback.c | 29 ++++------------------------- 1 file changed, 4 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 0088bf60f36..31743534d1e 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -321,6 +321,7 @@ struct seg_buf { static void xen_blkbk_unmap(struct pending_req *req) { struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST]; + struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST]; unsigned int i, invcount = 0; grant_handle_t handle; int ret; @@ -332,25 +333,12 @@ static void xen_blkbk_unmap(struct pending_req *req) gnttab_set_unmap_op(&unmap[invcount], vaddr(req, i), GNTMAP_host_map, handle); pending_handle(req, i) = BLKBACK_INVALID_HANDLE; + pages[invcount] = virt_to_page(vaddr(req, i)); invcount++; } - ret = HYPERVISOR_grant_table_op( - GNTTABOP_unmap_grant_ref, unmap, invcount); + ret = gnttab_unmap_refs(unmap, pages, invcount, false); BUG_ON(ret); - /* - * Note, we use invcount, so nr->pages, so we can't index - * using vaddr(req, i). - */ - for (i = 0; i < invcount; i++) { - ret = m2p_remove_override( - virt_to_page(unmap[i].host_addr), false); - if (ret) { - pr_alert(DRV_PFX "Failed to remove M2P override for %lx\n", - (unsigned long)unmap[i].host_addr); - continue; - } - } } static int xen_blkbk_map(struct blkif_request *req, @@ -378,7 +366,7 @@ static int xen_blkbk_map(struct blkif_request *req, pending_req->blkif->domid); } - ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map, nseg); + ret = gnttab_map_refs(map, NULL, &blkbk->pending_page(pending_req, 0), nseg); BUG_ON(ret); /* @@ -398,15 +386,6 @@ static int xen_blkbk_map(struct blkif_request *req, if (ret) continue; - ret = m2p_add_override(PFN_DOWN(map[i].dev_bus_addr), - blkbk->pending_page(pending_req, i), NULL); - if (ret) { - pr_alert(DRV_PFX "Failed to install M2P override for %lx (ret: %d)\n", - (unsigned long)map[i].dev_bus_addr, ret); - /* We could switch over to GNTTABOP_copy */ - continue; - } - seg[i].buf = map[i].dev_bus_addr | (req->u.rw.seg[i].first_sect << 9); } -- cgit v1.2.3-70-g09d2 From b2167ba6dd89d55ced26a867fad8f0fe388fd595 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Mon, 28 Nov 2011 11:49:05 -0500 Subject: xen/blkback: Enable blkback on HVM guests Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/blkback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 31743534d1e..70caa896997 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -809,7 +809,7 @@ static int __init xen_blkif_init(void) int i, mmap_pages; int rc = 0; - if (!xen_pv_domain()) + if (!xen_domain()) return -ENODEV; blkbk = kzalloc(sizeof(struct xen_blkbk), GFP_KERNEL); -- cgit v1.2.3-70-g09d2 From 34ae2e47d97216d8c66a1c5dff5b530c29b746b8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:26 +0900 Subject: xen-blkfront: use bitmap_set() and bitmap_clear() Use bitmap_set and bitmap_clear rather than modifying individual bits in a memory region. Signed-off-by: Akinobu Mita Cc: Jeremy Fitzhardinge Cc: Konrad Rzeszutek Wilk Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 2f22874c0a3..619868d91ca 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include @@ -177,8 +178,7 @@ static int xlbd_reserve_minors(unsigned int minor, unsigned int nr) spin_lock(&minor_lock); if (find_next_bit(minors, end, minor) >= end) { - for (; minor < end; ++minor) - __set_bit(minor, minors); + bitmap_set(minors, minor, nr); rc = 0; } else rc = -EBUSY; @@ -193,8 +193,7 @@ static void xlbd_release_minors(unsigned int minor, unsigned int nr) BUG_ON(end > nr_minors); spin_lock(&minor_lock); - for (; minor < end; ++minor) - __clear_bit(minor, minors); + bitmap_clear(minors, minor, nr); spin_unlock(&minor_lock); } -- cgit v1.2.3-70-g09d2 From dad5cf659b202b5070c8616b5c515f6ca4db0c42 Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Thu, 16 Feb 2012 13:16:25 +0100 Subject: xen/blkfront: don't put bdev right after getting it We should hang onto bdev until we're done with it. Signed-off-by: Andrew Jones [v1: Fixed up git commit description] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 619868d91ca..537cb722a21 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1409,7 +1409,6 @@ static int blkif_release(struct gendisk *disk, fmode_t mode) mutex_lock(&blkfront_mutex); bdev = bdget_disk(disk, 0); - bdput(bdev); if (bdev->bd_openers) goto out; @@ -1440,6 +1439,7 @@ static int blkif_release(struct gendisk *disk, fmode_t mode) } out: + bdput(bdev); mutex_unlock(&blkfront_mutex); return 0; } -- cgit v1.2.3-70-g09d2 From 3467811e26660eb46bc655234573d22d6876d5f9 Mon Sep 17 00:00:00 2001 From: Steven Noonan Date: Fri, 17 Feb 2012 12:04:44 -0800 Subject: xen-blkfront: make blkif_io_lock spinlock per-device This patch moves the global blkif_io_lock to the per-device structure. The spinlock seems to exists for two reasons: to disable IRQs when in the interrupt handlers for blkfront, and to protect the blkfront VBDs when a detachment is requested. Having a global blkif_io_lock doesn't make sense given the use case, and it drastically hinders performance due to contention. All VBDs with pending IOs have to take the lock in order to get work done, which serializes everything pretty badly. Signed-off-by: Steven Noonan Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 537cb722a21..5d9c559f187 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -82,6 +82,7 @@ static const struct block_device_operations xlvbd_block_fops; */ struct blkfront_info { + spinlock_t io_lock; struct mutex mutex; struct xenbus_device *xbdev; struct gendisk *gd; @@ -106,8 +107,6 @@ struct blkfront_info int is_ready; }; -static DEFINE_SPINLOCK(blkif_io_lock); - static unsigned int nr_minors; static unsigned long *minors; static DEFINE_SPINLOCK(minor_lock); @@ -418,7 +417,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) struct request_queue *rq; struct blkfront_info *info = gd->private_data; - rq = blk_init_queue(do_blkif_request, &blkif_io_lock); + rq = blk_init_queue(do_blkif_request, &info->io_lock); if (rq == NULL) return -1; @@ -635,14 +634,14 @@ static void xlvbd_release_gendisk(struct blkfront_info *info) if (info->rq == NULL) return; - spin_lock_irqsave(&blkif_io_lock, flags); + spin_lock_irqsave(&info->io_lock, flags); /* No more blkif_request(). */ blk_stop_queue(info->rq); /* No more gnttab callback work. */ gnttab_cancel_free_callback(&info->callback); - spin_unlock_irqrestore(&blkif_io_lock, flags); + spin_unlock_irqrestore(&info->io_lock, flags); /* Flush gnttab callback work. Must be done with no locks held. */ flush_work_sync(&info->work); @@ -674,16 +673,16 @@ static void blkif_restart_queue(struct work_struct *work) { struct blkfront_info *info = container_of(work, struct blkfront_info, work); - spin_lock_irq(&blkif_io_lock); + spin_lock_irq(&info->io_lock); if (info->connected == BLKIF_STATE_CONNECTED) kick_pending_request_queues(info); - spin_unlock_irq(&blkif_io_lock); + spin_unlock_irq(&info->io_lock); } static void blkif_free(struct blkfront_info *info, int suspend) { /* Prevent new requests being issued until we fix things up. */ - spin_lock_irq(&blkif_io_lock); + spin_lock_irq(&info->io_lock); info->connected = suspend ? BLKIF_STATE_SUSPENDED : BLKIF_STATE_DISCONNECTED; /* No more blkif_request(). */ @@ -691,7 +690,7 @@ static void blkif_free(struct blkfront_info *info, int suspend) blk_stop_queue(info->rq); /* No more gnttab callback work. */ gnttab_cancel_free_callback(&info->callback); - spin_unlock_irq(&blkif_io_lock); + spin_unlock_irq(&info->io_lock); /* Flush gnttab callback work. Must be done with no locks held. */ flush_work_sync(&info->work); @@ -727,10 +726,10 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) struct blkfront_info *info = (struct blkfront_info *)dev_id; int error; - spin_lock_irqsave(&blkif_io_lock, flags); + spin_lock_irqsave(&info->io_lock, flags); if (unlikely(info->connected != BLKIF_STATE_CONNECTED)) { - spin_unlock_irqrestore(&blkif_io_lock, flags); + spin_unlock_irqrestore(&info->io_lock, flags); return IRQ_HANDLED; } @@ -815,7 +814,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id) kick_pending_request_queues(info); - spin_unlock_irqrestore(&blkif_io_lock, flags); + spin_unlock_irqrestore(&info->io_lock, flags); return IRQ_HANDLED; } @@ -990,6 +989,7 @@ static int blkfront_probe(struct xenbus_device *dev, } mutex_init(&info->mutex); + spin_lock_init(&info->io_lock); info->xbdev = dev; info->vdevice = vdevice; info->connected = BLKIF_STATE_DISCONNECTED; @@ -1067,7 +1067,7 @@ static int blkif_recover(struct blkfront_info *info) xenbus_switch_state(info->xbdev, XenbusStateConnected); - spin_lock_irq(&blkif_io_lock); + spin_lock_irq(&info->io_lock); /* Now safe for us to use the shared ring */ info->connected = BLKIF_STATE_CONNECTED; @@ -1078,7 +1078,7 @@ static int blkif_recover(struct blkfront_info *info) /* Kick any other new requests queued since we resumed */ kick_pending_request_queues(info); - spin_unlock_irq(&blkif_io_lock); + spin_unlock_irq(&info->io_lock); return 0; } @@ -1276,10 +1276,10 @@ static void blkfront_connect(struct blkfront_info *info) xenbus_switch_state(info->xbdev, XenbusStateConnected); /* Kick pending requests. */ - spin_lock_irq(&blkif_io_lock); + spin_lock_irq(&info->io_lock); info->connected = BLKIF_STATE_CONNECTED; kick_pending_request_queues(info); - spin_unlock_irq(&blkif_io_lock); + spin_unlock_irq(&info->io_lock); add_disk(info->gd); -- cgit v1.2.3-70-g09d2 From 395d287526bb60411ff37b19ad9dd38b58ba8732 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 22 Mar 2012 21:40:08 +0100 Subject: cciss: Initialize scsi host max_sectors for tape drive support The default is too small (1024 blocks), use h->cciss_max_sectors (8192 blocks) Without this change, if you try to set the block size of a tape drive above 512*1024, via "mt -f /dev/st0 setblk nnn" where nnn is greater than 524288, it won't work right. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index e820b68d2f6..f510a9c9a6f 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -866,6 +866,7 @@ cciss_scsi_detect(ctlr_info_t *h) sh->can_queue = cciss_tape_cmds; sh->sg_tablesize = h->maxsgentries; sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_sectors = h->cciss_max_sectors; ((struct cciss_scsi_adapter_data_t *) h->scsi_ctlr)->scsi_host = sh; -- cgit v1.2.3-70-g09d2 From bc67f63650fad6b3478d9ddfd5406d45a95987c9 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 22 Mar 2012 21:40:09 +0100 Subject: cciss: Fix scsi tape io with more than 255 scatter gather elements The total number of scatter gather elements in the CISS command used by the scsi tape code was being cast to a u8, which can hold at most 255 scatter gather elements. It should have been cast to a u16. Without this patch the command gets rejected by the controller since the total scatter gather count did not add up to the right value resulting in an i/o error. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index f510a9c9a6f..acda773b372 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -1411,7 +1411,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c, /* track how many SG entries we are using */ if (request_nsgs > h->maxSG) h->maxSG = request_nsgs; - c->Header.SGTotal = (__u8) request_nsgs + chained; + c->Header.SGTotal = (u16) request_nsgs + chained; if (request_nsgs > h->max_cmd_sgentries) c->Header.SGList = h->max_cmd_sgentries; else -- cgit v1.2.3-70-g09d2 From 22be2e6e13ac09b20000582ac34d47fb0029a6da Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Fri, 23 Mar 2012 12:33:03 +0100 Subject: mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port() This patch includes two changes: * fix incorrect value set for drv_cleanup_done * re-initialize and start port in mtip_restart_port() Signed-off-by: Asai Thambi S P Signed-off-by: Sam Bradshaw Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 8eb81c96608..04f69e6da1f 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -422,6 +422,10 @@ static void mtip_init_port(struct mtip_port *port) /* Clear any pending interrupts for this port */ writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT); + /* Clear any pending interrupts on the HBA. */ + writel(readl(port->dd->mmio + HOST_IRQ_STAT), + port->dd->mmio + HOST_IRQ_STAT); + /* Enable port interrupts */ writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK); } @@ -490,11 +494,9 @@ static void mtip_restart_port(struct mtip_port *port) dev_warn(&port->dd->pdev->dev, "COM reset failed\n"); - /* Clear SError, the PxSERR.DIAG.x should be set so clear it */ - writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR); + mtip_init_port(port); + mtip_start_port(port); - /* Enable the DMA engine */ - mtip_enable_engine(port, 1); } /* @@ -3359,9 +3361,6 @@ static int mtip_pci_probe(struct pci_dev *pdev, return -ENOMEM; } - /* Set the atomic variable as 1 in case of SRSI */ - atomic_set(&dd->drv_cleanup_done, true); - atomic_set(&dd->resumeflag, false); /* Attach the private data to this PCI device. */ @@ -3434,8 +3433,8 @@ iomap_err: pci_set_drvdata(pdev, NULL); return rv; done: - /* Set the atomic variable as 0 in case of SRSI */ - atomic_set(&dd->drv_cleanup_done, true); + /* Set the atomic variable as 0 */ + atomic_set(&dd->drv_cleanup_done, false); return rv; } @@ -3463,8 +3462,6 @@ static void mtip_pci_remove(struct pci_dev *pdev) } } } - /* Set the atomic variable as 1 in case of SRSI */ - atomic_set(&dd->drv_cleanup_done, true); /* Clean up the block layer. */ mtip_block_remove(dd); -- cgit v1.2.3-70-g09d2 From 275029353953c2117941ade84f02a2303912fad1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 23 Mar 2012 13:36:42 -0700 Subject: ioat: fix size of 'completion' for Xen Starting with v3.2 Jonathan reports that Xen crashes loading the ioatdma driver. A debug run shows: ioatdma 0000:00:16.4: desc[0]: (0x300cc7000->0x300cc7040) cookie: 0 flags: 0x2 ctl: 0x29 (op: 0 int_en: 1 compl: 1) ... ioatdma 0000:00:16.4: ioat_get_current_completion: phys_complete: 0xcc7000 ...which shows that in this environment GFP_KERNEL memory may be backed by a 64-bit dma address. This breaks the driver's assumption that an unsigned long should be able to contain the physical address for descriptor memory. Switch to dma_addr_t which beyond being the right size, is the true type for the data i.e. an io-virtual address inidicating the engine's last processed descriptor. [stable: 3.2+] Cc: Reported-by: Jonathan Nieder Reported-by: William Dauchy Tested-by: William Dauchy Tested-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.c | 16 ++++++++-------- drivers/dma/ioat/dma.h | 6 +++--- drivers/dma/ioat/dma_v2.c | 8 ++++---- drivers/dma/ioat/dma_v3.c | 8 ++++---- 4 files changed, 19 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index a4d6cb0c034..65951801597 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -548,9 +548,9 @@ void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags, PCI_DMA_TODEVICE, flags, 0); } -unsigned long ioat_get_current_completion(struct ioat_chan_common *chan) +dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 completion; completion = *chan->completion; @@ -571,7 +571,7 @@ unsigned long ioat_get_current_completion(struct ioat_chan_common *chan) } bool ioat_cleanup_preamble(struct ioat_chan_common *chan, - unsigned long *phys_complete) + dma_addr_t *phys_complete) { *phys_complete = ioat_get_current_completion(chan); if (*phys_complete == chan->last_completion) @@ -582,14 +582,14 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, return true; } -static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct list_head *_desc, *n; struct dma_async_tx_descriptor *tx; - dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n", - __func__, phys_complete); + dev_dbg(to_dev(chan), "%s: phys_complete: %llx\n", + __func__, (unsigned long long) phys_complete); list_for_each_safe(_desc, n, &ioat->used_desc) { struct ioat_desc_sw *desc; @@ -655,7 +655,7 @@ static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete) static void ioat1_cleanup(struct ioat_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; prefetch(chan->completion); @@ -701,7 +701,7 @@ static void ioat1_timer_event(unsigned long data) mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT); spin_unlock_bh(&ioat->desc_lock); } else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&ioat->desc_lock); /* if we haven't made progress and we have already diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 5216c8a92a2..8bebddd189c 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -88,7 +88,7 @@ struct ioatdma_device { struct ioat_chan_common { struct dma_chan common; void __iomem *reg_base; - unsigned long last_completion; + dma_addr_t last_completion; spinlock_t cleanup_lock; dma_cookie_t completed_cookie; unsigned long state; @@ -333,7 +333,7 @@ int __devinit ioat_dma_self_test(struct ioatdma_device *device); void __devexit ioat_dma_remove(struct ioatdma_device *device); struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase); -unsigned long ioat_get_current_completion(struct ioat_chan_common *chan); +dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan); void ioat_init_channel(struct ioatdma_device *device, struct ioat_chan_common *chan, int idx); enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie, @@ -341,7 +341,7 @@ enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie, void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags, size_t len, struct ioat_dma_descriptor *hw); bool ioat_cleanup_preamble(struct ioat_chan_common *chan, - unsigned long *phys_complete); + dma_addr_t *phys_complete); void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); extern const struct sysfs_ops ioat_sysfs_ops; diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 5d65f837797..cb8864d4560 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -126,7 +126,7 @@ static void ioat2_start_null_desc(struct ioat2_dma_chan *ioat) spin_unlock_bh(&ioat->prep_lock); } -static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct dma_async_tx_descriptor *tx; @@ -178,7 +178,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) static void ioat2_cleanup(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&chan->cleanup_lock); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -259,7 +259,7 @@ int ioat2_reset_sync(struct ioat_chan_common *chan, unsigned long tmo) static void ioat2_restart_channel(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -274,7 +274,7 @@ void ioat2_timer_event(unsigned long data) struct ioat_chan_common *chan = &ioat->base; if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 status; status = ioat_chansts(chan); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index f519c93a61e..2dbf32b0273 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -256,7 +256,7 @@ static bool desc_has_ext(struct ioat_ring_ent *desc) * The difference from the dma_v2.c __cleanup() is that this routine * handles extended descriptors and dma-unmapping raid operations. */ -static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) +static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete) { struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent *desc; @@ -314,7 +314,7 @@ static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete) static void ioat3_cleanup(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; spin_lock_bh(&chan->cleanup_lock); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -333,7 +333,7 @@ static void ioat3_cleanup_event(unsigned long data) static void ioat3_restart_channel(struct ioat2_dma_chan *ioat) { struct ioat_chan_common *chan = &ioat->base; - unsigned long phys_complete; + dma_addr_t phys_complete; ioat2_quiesce(chan, 0); if (ioat_cleanup_preamble(chan, &phys_complete)) @@ -348,7 +348,7 @@ static void ioat3_timer_event(unsigned long data) struct ioat_chan_common *chan = &ioat->base; if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) { - unsigned long phys_complete; + dma_addr_t phys_complete; u64 status; status = ioat_chansts(chan); -- cgit v1.2.3-70-g09d2 From 4dae76705fc8f9854bb732f9944e7ff9ba7a8e9f Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 13 Mar 2012 18:43:23 -0400 Subject: xen/blkback: Squash the discard support for 'file' and 'phy' type. The only reason for the distinction was for the special case of 'file' (which is assumed to be loopback device), was to reach inside the loopback device, find the underlaying file, and call fallocate on it. Fortunately "xen-blkback: convert hole punching to discard request on loop devices" removes that use-case and we now based the discard support based on blk_queue_discard(q) and extract all appropriate parameters from the 'struct request_queue'. CC: Li Dongyang Acked-by: Jan Beulich [v1: Dropping pointless initializer and keeping blank line] [v2: Remove the kfree as it is not used anymore] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/blkback.c | 19 +++++----- drivers/block/xen-blkback/common.h | 6 ---- drivers/block/xen-blkback/xenbus.c | 70 ++++++++++++++----------------------- 3 files changed, 34 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 70caa896997..73f196ca713 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -398,21 +398,18 @@ static int dispatch_discard_io(struct xen_blkif *blkif, int err = 0; int status = BLKIF_RSP_OKAY; struct block_device *bdev = blkif->vbd.bdev; + unsigned long secure; blkif->st_ds_req++; xen_blkif_get(blkif); - if (blkif->blk_backend_type == BLKIF_BACKEND_PHY || - blkif->blk_backend_type == BLKIF_BACKEND_FILE) { - unsigned long secure = (blkif->vbd.discard_secure && - (req->u.discard.flag & BLKIF_DISCARD_SECURE)) ? - BLKDEV_DISCARD_SECURE : 0; - err = blkdev_issue_discard(bdev, - req->u.discard.sector_number, - req->u.discard.nr_sectors, - GFP_KERNEL, secure); - } else - err = -EOPNOTSUPP; + secure = (blkif->vbd.discard_secure && + (req->u.discard.flag & BLKIF_DISCARD_SECURE)) ? + BLKDEV_DISCARD_SECURE : 0; + + err = blkdev_issue_discard(bdev, req->u.discard.sector_number, + req->u.discard.nr_sectors, + GFP_KERNEL, secure); if (err == -EOPNOTSUPP) { pr_debug(DRV_PFX "discard op failed, not supported\n"); diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index d0ee7edc9be..773cf27dc23 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -146,11 +146,6 @@ enum blkif_protocol { BLKIF_PROTOCOL_X86_64 = 3, }; -enum blkif_backend_type { - BLKIF_BACKEND_PHY = 1, - BLKIF_BACKEND_FILE = 2, -}; - struct xen_vbd { /* What the domain refers to this vbd as. */ blkif_vdev_t handle; @@ -177,7 +172,6 @@ struct xen_blkif { unsigned int irq; /* Comms information. */ enum blkif_protocol blk_protocol; - enum blkif_backend_type blk_backend_type; union blkif_back_rings blk_rings; void *blk_ring; /* The VBD attached to this interface. */ diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 24a2fb57e5d..d417c13e027 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -390,61 +390,43 @@ int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be) { struct xenbus_device *dev = be->dev; struct xen_blkif *blkif = be->blkif; - char *type; int err; int state = 0; + struct block_device *bdev = be->blkif->vbd.bdev; + struct request_queue *q = bdev_get_queue(bdev); - type = xenbus_read(XBT_NIL, dev->nodename, "type", NULL); - if (!IS_ERR(type)) { - if (strncmp(type, "file", 4) == 0) { - state = 1; - blkif->blk_backend_type = BLKIF_BACKEND_FILE; + if (blk_queue_discard(q)) { + err = xenbus_printf(xbt, dev->nodename, + "discard-granularity", "%u", + q->limits.discard_granularity); + if (err) { + xenbus_dev_fatal(dev, err, + "writing discard-granularity"); + goto out; + } + err = xenbus_printf(xbt, dev->nodename, + "discard-alignment", "%u", + q->limits.discard_alignment); + if (err) { + xenbus_dev_fatal(dev, err, + "writing discard-alignment"); + goto out; } - if (strncmp(type, "phy", 3) == 0) { - struct block_device *bdev = be->blkif->vbd.bdev; - struct request_queue *q = bdev_get_queue(bdev); - if (blk_queue_discard(q)) { - err = xenbus_printf(xbt, dev->nodename, - "discard-granularity", "%u", - q->limits.discard_granularity); - if (err) { - xenbus_dev_fatal(dev, err, - "writing discard-granularity"); - goto kfree; - } - err = xenbus_printf(xbt, dev->nodename, - "discard-alignment", "%u", - q->limits.discard_alignment); - if (err) { - xenbus_dev_fatal(dev, err, - "writing discard-alignment"); - goto kfree; - } - state = 1; - blkif->blk_backend_type = BLKIF_BACKEND_PHY; - } - /* Optional. */ - err = xenbus_printf(xbt, dev->nodename, - "discard-secure", "%d", - blkif->vbd.discard_secure); - if (err) { - xenbus_dev_fatal(dev, err, + state = 1; + /* Optional. */ + err = xenbus_printf(xbt, dev->nodename, + "discard-secure", "%d", + blkif->vbd.discard_secure); + if (err) { + xenbus_dev_fatal(dev, err, "writting discard-secure"); - goto kfree; - } + goto out; } - } else { - err = PTR_ERR(type); - xenbus_dev_fatal(dev, err, "reading type"); - goto out; } - err = xenbus_printf(xbt, dev->nodename, "feature-discard", "%d", state); if (err) xenbus_dev_fatal(dev, err, "writing feature-discard"); -kfree: - kfree(type); out: return err; } -- cgit v1.2.3-70-g09d2 From 3389bb8bf76180eecaffdfa7dd5b35fa4a2ce9b5 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 14 Mar 2012 13:04:00 -0400 Subject: xen/blkback: Make optional features be really optional. They were using the xenbus_dev_fatal() function which would change the state of the connection immediately. Which is not what we want when we advertise optional features. So make 'feature-discard','feature-barrier','feature-flush-cache' optional. Suggested-by: Jan Beulich [v1: Made the discard function void and static] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index d417c13e027..89860f34a7e 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -381,12 +381,12 @@ int xen_blkbk_flush_diskcache(struct xenbus_transaction xbt, err = xenbus_printf(xbt, dev->nodename, "feature-flush-cache", "%d", state); if (err) - xenbus_dev_fatal(dev, err, "writing feature-flush-cache"); + dev_warn(&dev->dev, "writing feature-flush-cache (%d)", err); return err; } -int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be) +static void xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be) { struct xenbus_device *dev = be->dev; struct xen_blkif *blkif = be->blkif; @@ -400,17 +400,15 @@ int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be) "discard-granularity", "%u", q->limits.discard_granularity); if (err) { - xenbus_dev_fatal(dev, err, - "writing discard-granularity"); - goto out; + dev_warn(&dev->dev, "writing discard-granularity (%d)", err); + return; } err = xenbus_printf(xbt, dev->nodename, "discard-alignment", "%u", q->limits.discard_alignment); if (err) { - xenbus_dev_fatal(dev, err, - "writing discard-alignment"); - goto out; + dev_warn(&dev->dev, "writing discard-alignment (%d)", err); + return; } state = 1; /* Optional. */ @@ -418,17 +416,14 @@ int xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info *be) "discard-secure", "%d", blkif->vbd.discard_secure); if (err) { - xenbus_dev_fatal(dev, err, - "writting discard-secure"); - goto out; + dev_warn(dev-dev, "writing discard-secure (%d)", err); + return; } } err = xenbus_printf(xbt, dev->nodename, "feature-discard", "%d", state); if (err) - xenbus_dev_fatal(dev, err, "writing feature-discard"); -out: - return err; + dev_warn(&dev->dev, "writing feature-discard (%d)", err); } int xen_blkbk_barrier(struct xenbus_transaction xbt, struct backend_info *be, int state) @@ -439,7 +434,7 @@ int xen_blkbk_barrier(struct xenbus_transaction xbt, err = xenbus_printf(xbt, dev->nodename, "feature-barrier", "%d", state); if (err) - xenbus_dev_fatal(dev, err, "writing feature-barrier"); + dev_warn(&dev->dev, "writing feature-barrier (%d)", err); return err; } @@ -671,14 +666,12 @@ again: return; } - err = xen_blkbk_flush_diskcache(xbt, be, be->blkif->vbd.flush_support); - if (err) - goto abort; + /* If we can't advertise it is OK. */ + xen_blkbk_flush_diskcache(xbt, be, be->blkif->vbd.flush_support); - err = xen_blkbk_discard(xbt, be); + xen_blkbk_discard(xbt, be); - /* If we can't advertise it is OK. */ - err = xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support); + xen_blkbk_barrier(xbt, be, be->blkif->vbd.flush_support); err = xenbus_printf(xbt, dev->nodename, "sectors", "%llu", (unsigned long long)vbd_sz(&be->blkif->vbd)); -- cgit v1.2.3-70-g09d2 From 3d9ea9e3af048ab6b8dced15248384e548ba05ea Mon Sep 17 00:00:00 2001 From: Don Morris Date: Thu, 15 Mar 2012 11:07:30 -0700 Subject: iop-adma: Corrected array overflow in RAID6 Xscale(R) test. Bug: cppcheck reported overflow in array assignment (for loop walks 0 to IOP_ADMA_NUM_SRC_TEST+2, array size is IOP_ADMA_NUM_SRC_TEST). Reported as: https://bugzilla.kernel.org/show_bug.cgi?id=42677 Test code pq_src array was grown by two elements to correspond with actual usage (IOP_ADMA_NUM_SRC_TEST+2), stack consumption was kept constant by modifying the pq_dest two element array which is only used when pq_src is referenced up to IOP_ADMA_NUM_SRC_TEST elements into the address of the new last two elements of the pq_src array. This is presumed to be the original intent but would be reliant on compilers always having pq_dest contiguous with the final element of pq_src. Note: This is a re-send of a request for review from two weeks ago. Looking for review (or shootdown), adding LKML to list for a wider audience. Thanks. Updated per review comments of Sergei Shtylyov Signed-off-by: Don Morris Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 04be90b645b..9b1951df5c2 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1271,8 +1271,8 @@ iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device) struct page **pq_hw = &pq[IOP_ADMA_NUM_SRC_TEST+2]; /* address conversion buffers (dma_map / page_address) */ void *pq_sw[IOP_ADMA_NUM_SRC_TEST+2]; - dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST]; - dma_addr_t pq_dest[2]; + dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST+2]; + dma_addr_t *pq_dest = &pq_src[IOP_ADMA_NUM_SRC_TEST]; int i; struct dma_async_tx_descriptor *tx; -- cgit v1.2.3-70-g09d2 From 6dfc326f0605fd87e4c10ccde10de0ce4280d72d Mon Sep 17 00:00:00 2001 From: João Paulo Rechi Vita Date: Wed, 14 Mar 2012 21:45:16 +0200 Subject: Bluetooth: btusb: Add USB device ID "0a5c 21e8" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One more vendor-specific ID for BCM20702A0. T: Bus=01 Lev=03 Prnt=05 Port=02 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e8 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=00027221F4E2 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: João Paulo Rechi Vita Acked-by: Gustavo F. Padovan Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 480cad92004..b6338543c03 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -103,6 +103,7 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, + { USB_DEVICE(0x0a5c, 0x21e8) }, { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, -- cgit v1.2.3-70-g09d2 From 07c0ea874d43c299d185948452945a361052b6e3 Mon Sep 17 00:00:00 2001 From: "Cho, Yu-Chen" Date: Wed, 14 Mar 2012 22:01:21 +0200 Subject: Bluetooth: Add Atheros maryann PIDVID support Add Atheros maryann 0cf3:311d PIDVID support This module is AR3012 Series. Include /sys/kernel/debug/usb/devices output here for reference before: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311d Rev= 0.01 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms after: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=311d Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Cho, Yu-Chen cked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 48442476ec0..fa659131fbd 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -72,6 +72,7 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR3012 with sflash firmware*/ { USB_DEVICE(0x0CF3, 0x3004) }, + { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, /* Atheros AR5BBU12 with sflash firmware */ @@ -89,6 +90,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { /* Atheros AR3012 with sflash firmware*/ { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index b6338543c03..9a5d8111f13 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -130,6 +130,7 @@ static struct usb_device_id blacklist_table[] = { /* Atheros 3012 with sflash firmware */ { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ -- cgit v1.2.3-70-g09d2 From 33b69bf80a3704d45341928e4ff68b6ebd470686 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 15 Mar 2012 14:48:40 +0100 Subject: Bluetooth: hci_ldisc: fix NULL-pointer dereference on tty_close Do not close protocol driver until device has been unregistered. This fixes a race between tty_close and hci_dev_open which can result in a NULL-pointer dereference. The line discipline closes the protocol driver while we may still have hci_dev_open sleeping on the req_lock mutex resulting in a NULL-pointer dereference when lock is acquired and hci_init_req called. Bug is 100% reproducible using hciattach and a disconnected serial port: 0. # hciattach -n ttyO1 any noflow 1. hci_dev_open called from hci_power_on grabs req lock 2. hci_init_req executes but device fails to initialise (times out eventually) 3. hci_dev_open is called from hci_sock_ioctl and sleeps on req lock 4. hci_uart_tty_close detaches protocol driver and cancels init req 5. hci_dev_open (1) releases req lock 6. hci_dev_open (3) grabs req lock, calls hci_init_req, which triggers oops when request is prepared in hci_uart_send_frame [ 137.201263] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 137.209838] pgd = c0004000 [ 137.212677] [00000028] *pgd=00000000 [ 137.216430] Internal error: Oops: 17 [#1] [ 137.220642] Modules linked in: [ 137.223846] CPU: 0 Tainted: G W (3.3.0-rc6-dirty #406) [ 137.230529] PC is at __lock_acquire+0x5c/0x1ab0 [ 137.235290] LR is at lock_acquire+0x9c/0x128 [ 137.239776] pc : [] lr : [] psr: 20000093 [ 137.239776] sp : cf869dd8 ip : c0529554 fp : c051c730 [ 137.251800] r10: 00000000 r9 : cf8673c0 r8 : 00000080 [ 137.257293] r7 : 00000028 r6 : 00000002 r5 : 00000000 r4 : c053fd70 [ 137.264129] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 137.270965] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 137.278717] Control: 10c5387d Table: 8f0f4019 DAC: 00000015 [ 137.284729] Process kworker/u:1 (pid: 7, stack limit = 0xcf8682e8) [ 137.291229] Stack: (0xcf869dd8 to 0xcf86a000) [ 137.295776] 9dc0: c0529554 00000000 [ 137.304351] 9de0: cf8673c0 cf868000 d03ea1ef cf868000 000001ef 00000470 00000000 00000002 [ 137.312927] 9e00: cf8673c0 00000001 c051c730 c00716ec 0000000c 00000440 c0529554 00000001 [ 137.321533] 9e20: c051c730 cf868000 d03ea1f3 00000000 c053b978 00000000 00000028 cf868000 [ 137.330078] 9e40: 00000000 00000000 00000002 00000000 00000000 c00733f8 00000002 00000080 [ 137.338684] 9e60: 00000000 c02a1d50 00000000 00000001 60000013 c0969a1c 60000093 c053b96c [ 137.347259] 9e80: 00000002 00000018 20000013 c02a1d50 cf0ac000 00000000 00000002 cf868000 [ 137.355834] 9ea0: 00000089 c0374130 00000002 00000000 c02a1d50 cf0ac000 0000000c cf0fc540 [ 137.364410] 9ec0: 00000018 c02a1d50 cf0fc540 00000000 cf0fc540 c0282238 c028220c cf178d80 [ 137.372985] 9ee0: 127525d8 c02821cc 9a1fa451 c032727c 9a1fa451 127525d8 cf0fc540 cf0ac4ec [ 137.381561] 9f00: cf0ac000 cf0fc540 cf0ac584 c03285f4 c0328580 cf0ac4ec cf85c740 c05510cc [ 137.390136] 9f20: ce825400 c004c914 00000002 00000000 c004c884 ce8254f5 cf869f48 00000000 [ 137.398712] 9f40: c0328580 ce825415 c0a7f914 c061af64 00000000 c048cf3c cf8673c0 cf85c740 [ 137.407287] 9f60: c05510cc c051a66c c05510ec c05510c4 cf85c750 cf868000 00000089 c004d6ac [ 137.415863] 9f80: 00000000 c0073d14 00000001 cf853ed8 cf85c740 c004d558 00000013 00000000 [ 137.424438] 9fa0: 00000000 00000000 00000000 c00516b0 00000000 00000000 cf85c740 00000000 [ 137.433013] 9fc0: 00000001 dead4ead ffffffff ffffffff c0551674 00000000 00000000 c0450aa4 [ 137.441589] 9fe0: cf869fe0 cf869fe0 cf853ed8 c005162c c0013b30 c0013b30 00ffff00 00ffff00 [ 137.450164] [] (__lock_acquire+0x5c/0x1ab0) from [] (lock_acquire+0x9c/0x128) [ 137.459503] [] (lock_acquire+0x9c/0x128) from [] (_raw_spin_lock_irqsave+0x44/0x58) [ 137.469360] [] (_raw_spin_lock_irqsave+0x44/0x58) from [] (skb_queue_tail+0x18/0x48) [ 137.479339] [] (skb_queue_tail+0x18/0x48) from [] (h4_enqueue+0x2c/0x34) [ 137.488189] [] (h4_enqueue+0x2c/0x34) from [] (hci_uart_send_frame+0x34/0x68) [ 137.497497] [] (hci_uart_send_frame+0x34/0x68) from [] (hci_send_frame+0x50/0x88) [ 137.507171] [] (hci_send_frame+0x50/0x88) from [] (hci_cmd_work+0x74/0xd4) [ 137.516204] [] (hci_cmd_work+0x74/0xd4) from [] (process_one_work+0x1a0/0x4ec) [ 137.525604] [] (process_one_work+0x1a0/0x4ec) from [] (worker_thread+0x154/0x344) [ 137.535278] [] (worker_thread+0x154/0x344) from [] (kthread+0x84/0x90) [ 137.543975] [] (kthread+0x84/0x90) from [] (kernel_thread_exit+0x0/0x8) [ 137.552734] Code: e59f4e5c e5941000 e3510000 0a000031 (e5971000) [ 137.559234] ---[ end trace 1b75b31a2719ed1e ]--- Cc: stable Signed-off-by: Johan Hovold Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/hci_ldisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index fd5adb408f4..98a8c05d4f2 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -299,11 +299,11 @@ static void hci_uart_tty_close(struct tty_struct *tty) hci_uart_close(hdev); if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) { - hu->proto->close(hu); if (hdev) { hci_unregister_dev(hdev); hci_free_dev(hdev); } + hu->proto->close(hu); } kfree(hu); -- cgit v1.2.3-70-g09d2 From 55ed7d4d1469eafbe3ad7e8fcd44f5af27845a81 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Wed, 28 Mar 2012 10:25:36 +0800 Subject: Bluetooth: Add support for Atheros [04ca:3005] Add another vendor specific ID for Atheros AR3012 device. This chip is wrapped by Lite-On Technology Corp. output of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3005 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index fa659131fbd..ae9edca7b56 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -74,6 +74,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x3004) }, { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, + { USB_DEVICE(0x04CA, 0x3005) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -92,6 +93,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9a5d8111f13..ba89cd0cc6d 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -132,6 +132,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3-70-g09d2 From e9986f303dc0f285401de28cf96f42f4dd23a4a1 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Thu, 29 Mar 2012 10:09:44 +0200 Subject: virtio-blk: Call revalidate_disk() upon online disk resize If a virtio disk is open in guest and a disk resize operation is done, (virsh blockresize), new size is not visible to tools like "fdisk -l". This seems to be happening as we update only part->nr_sects and not bdev->bd_inode size. Call revalidate_disk() which should take care of it. I tested growing disk size of already open disk and it works for me. Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe --- drivers/block/virtio_blk.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c4a60badf25..0e4ef3de9d5 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -351,6 +351,7 @@ static void virtblk_config_changed_work(struct work_struct *work) cap_str_10, cap_str_2); set_capacity(vblk->disk, capacity); + revalidate_disk(vblk->disk); done: mutex_unlock(&vblk->config_lock); } -- cgit v1.2.3-70-g09d2 From 2e8b506310f6433d5558387fd568d4bfb1d6a799 Mon Sep 17 00:00:00 2001 From: Don Zickus Date: Wed, 28 Mar 2012 16:41:11 -0400 Subject: Bluetooth: btusb: typo in Broadcom SoftSailing id I was trying to backport the following commit to RHEL-6 From 0cea73465cd22373c5cd43a3edd25fbd4bb532ef Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 21 Sep 2011 11:37:15 +0200 Subject: [PATCH] btusb: add device entry for Broadcom SoftSailing and noticed it wasn't working on an HP Elitebook. Looking into the patch I noticed a very subtle typo in the ids. The patch has '0x05ac' instead of '0x0a5c'. A snippet of the lsusb -v output also shows this: Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 1 bDeviceProtocol 1 bMaxPacketSize0 64 idVendor 0x0a5c Broadcom Corp. idProduct 0x21e1 bcdDevice 1.12 iManufacturer 1 Broadcom Corp iProduct 2 BCM20702A0 iSerial 3 60D819F0338C bNumConfigurations 1 Looking at other Broadcom ids, the fix matches them whereas the original patch matches Apple's ids. Tested on an HP Elitebook 8760w. The btusb binds and the userspace stuff loads correctly. Cc: Oliver Neukum Signed-off-by: Don Zickus Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ba89cd0cc6d..3311b812a0c 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -61,7 +61,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, /* Broadcom SoftSailing reporting vendor specific */ - { USB_DEVICE(0x05ac, 0x21e1) }, + { USB_DEVICE(0x0a5c, 0x21e1) }, /* Apple MacBookPro 7,1 */ { USB_DEVICE(0x05ac, 0x8213) }, -- cgit v1.2.3-70-g09d2 From 2cee5715a926ad23d3f52ffd7da3ad38f54664dd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 30 Mar 2012 15:26:57 +0200 Subject: HID: tivo: fix support for bluetooth version of tivo Slide The device is a bluetooth device, but one occurence by mistake had marked it as USB. Reported-by: Joshua Dillon Signed-off-by: Jiri Kosina --- drivers/hid/hid-tivo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/hid-tivo.c b/drivers/hid/hid-tivo.c index de47039c708..9f85f827607 100644 --- a/drivers/hid/hid-tivo.c +++ b/drivers/hid/hid-tivo.c @@ -62,7 +62,7 @@ static int tivo_input_mapping(struct hid_device *hdev, struct hid_input *hi, static const struct hid_device_id tivo_devices[] = { /* TiVo Slide Bluetooth remote, pairs with a Broadcom dongle */ - { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) }, { HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) }, { } }; -- cgit v1.2.3-70-g09d2 From 9232b9b1b57dc5c01f435433e70e26c122bf4e44 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Tue, 20 Mar 2012 16:10:09 +0530 Subject: spi/davinci: Fix DMA API usage in davinci The driver uses NULL for dma_unmap_single instead of the struct device that the API expects. Signed-off-by: Shubhrajyoti D Tested-by: Akshay Shankarmurthy Signed-off-by: Grant Likely --- drivers/spi/spi-davinci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index 31bfba805cf..9b2901feaf7 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -653,7 +653,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", rx_buf_count); if (t->tx_buf) - dma_unmap_single(NULL, t->tx_dma, t->len, + dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE); return -ENOMEM; } @@ -692,10 +692,10 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) if (spicfg->io_type == SPI_IO_TYPE_DMA) { if (t->tx_buf) - dma_unmap_single(NULL, t->tx_dma, t->len, + dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE); - dma_unmap_single(NULL, t->rx_dma, rx_buf_count, + dma_unmap_single(&spi->dev, t->rx_dma, rx_buf_count, DMA_FROM_DEVICE); clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); -- cgit v1.2.3-70-g09d2 From 5039a86973cd35bdb2f64d28ee12f13fe2bb5a4c Mon Sep 17 00:00:00 2001 From: Kenth Eriksson Date: Fri, 30 Mar 2012 17:05:30 +0200 Subject: spi/mpc83xx: fix NULL pdata dereference bug Commit 178db7d3, "spi: Fix device unregistration when unregistering the bus master", changed device initialization to be children of the bus master, not children of the bus masters parent device. The pdata pointer used in fsl_spi_chipselect must updated to reflect the changed initialization. Signed-off-by: Kenth Eriksson Acked-by: Joakim Tjernlund Signed-off-by: Grant Likely --- drivers/spi/spi-fsl-spi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 24cacff5778..5f748c0d96b 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -139,10 +139,12 @@ static void fsl_spi_change_mode(struct spi_device *spi) static void fsl_spi_chipselect(struct spi_device *spi, int value) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; + struct fsl_spi_platform_data *pdata; bool pol = spi->mode & SPI_CS_HIGH; struct spi_mpc8xxx_cs *cs = spi->controller_state; + pdata = spi->dev.parent->parent->platform_data; + if (value == BITBANG_CS_INACTIVE) { if (pdata->cs_control) pdata->cs_control(spi, !pol); -- cgit v1.2.3-70-g09d2 From cc4d22ae541ccd989ef163c46a38afde131e1644 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 29 Mar 2012 21:54:18 +0200 Subject: spi/imx: mark base member in spi_imx_data as __iomem MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes 36 sparse warnings like: drivers/spi/spi-imx.c:143:1: warning: incorrect type in argument 1 (different address spaces) drivers/spi/spi-imx.c:143:1: expected void const volatile [noderef] * drivers/spi/spi-imx.c:143:1: got void * Signed-off-by: Uwe Kleine-König Signed-off-by: Grant Likely --- drivers/spi/spi-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 31054e3de4c..373f4fff935 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -83,7 +83,7 @@ struct spi_imx_data { struct spi_bitbang bitbang; struct completion xfer_done; - void *base; + void __iomem *base; int irq; struct clk *clk; unsigned long spi_clk; -- cgit v1.2.3-70-g09d2 From d2ef406866620f0450ad0b4c7fb5c2796c7bf245 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Mon, 2 Apr 2012 17:45:20 +0300 Subject: IB/mlx4: Don't return an invalid speed when a port is down When the IB port is down, the active_speed value returned by the MAD_IFC command is seven (7) which isn't among the defined IB speeds in enum ib_port_speed, and this invalid speed value is passed up to higher layers or applications who do port query. Fix that by setting the speed to be SDR -- the lowest possible -- when the port is down. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 75d30562930..669673e8143 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -253,6 +253,11 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port, if (out_mad->data[15] & 0x1) props->active_speed = IB_SPEED_FDR10; } + + /* Avoid wrong speed value returned by FW if the IB link is down. */ + if (props->state == IB_PORT_DOWN) + props->active_speed = IB_SPEED_SDR; + out: kfree(in_mad); kfree(out_mad); -- cgit v1.2.3-70-g09d2 From 0559d8dc13a1cd68b5e64c0b61659f36c7b5c89f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 2 Apr 2012 10:57:31 -0700 Subject: IB/core: Don't return EINVAL from sysfs rate attribute for invalid speeds Commit e9319b0cb00d ("IB/core: Fix SDR rates in sysfs") changed our sysfs rate attribute to return EINVAL to userspace if the underlying device driver returns an invalid rate. Apparently some drivers do this when the link is down and some userspace pukes if it gets an error when reading this attribute, so avoid a regression by not return an error to match the old code. Signed-off-by: Roland Dreier --- drivers/infiniband/core/sysfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 83b720ef6c3..246fdc15165 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -179,7 +179,7 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, { struct ib_port_attr attr; char *speed = ""; - int rate = -1; /* in deci-Gb/sec */ + int rate; /* in deci-Gb/sec */ ssize_t ret; ret = ib_query_port(p->ibdev, p->port_num, &attr); @@ -187,9 +187,6 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, return ret; switch (attr.active_speed) { - case IB_SPEED_SDR: - rate = 25; - break; case IB_SPEED_DDR: speed = " DDR"; rate = 50; @@ -210,6 +207,10 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused, speed = " EDR"; rate = 250; break; + case IB_SPEED_SDR: + default: /* default to SDR for invalid rates */ + rate = 25; + break; } rate *= ib_width_enum_to_int(attr.active_width); -- cgit v1.2.3-70-g09d2 From c0d78c23423ee6ec774ac53f129e61839dde1908 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 2 Apr 2012 14:57:01 +0800 Subject: regulator: anatop: fix 'anatop_regulator' name collision There is a name collision between 'struct platform_driver anatop_regulator' and 'struct anatop_regulator', which causes some section mismatch warnings like below. WARNING: vmlinux.o(.data+0x154d4): Section mismatch in reference from the variable anatop_regulator to the function .devinit.text:anatop_regulator_probe() The variable anatop_regulator references the function __devinit anatop_regulator_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Rename 'struct platform_driver anatop_regulator' to 'struct platform_driver anatop_regulator_driver' to fix the warnings. Signed-off-by: Shawn Guo Cc: Ying-Chun Liu (PaulLiu) Signed-off-by: Mark Brown --- drivers/regulator/anatop-regulator.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 17499a55113..e365d11aeb1 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -213,7 +213,7 @@ static struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = { { /* end */ } }; -static struct platform_driver anatop_regulator = { +static struct platform_driver anatop_regulator_driver = { .driver = { .name = "anatop_regulator", .owner = THIS_MODULE, @@ -225,13 +225,13 @@ static struct platform_driver anatop_regulator = { static int __init anatop_regulator_init(void) { - return platform_driver_register(&anatop_regulator); + return platform_driver_register(&anatop_regulator_driver); } postcore_initcall(anatop_regulator_init); static void __exit anatop_regulator_exit(void) { - platform_driver_unregister(&anatop_regulator); + platform_driver_unregister(&anatop_regulator_driver); } module_exit(anatop_regulator_exit); -- cgit v1.2.3-70-g09d2 From dcf9af822803bcc2cd9e8009648547e6060b59a0 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 3 Apr 2012 21:27:58 +0900 Subject: drm/exynos: fixed page align and code clean. 1M section, 64k page count also should be rounded up so this patch rounds up them and caculates page count of them properly and also checks memory flags from user. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_buf.c | 13 ++++------ drivers/gpu/drm/exynos/exynos_drm_gem.c | 45 ++++++++++++++++++++++++++------- drivers/gpu/drm/exynos/exynos_drm_gem.h | 2 ++ include/drm/exynos_drm.h | 3 ++- 4 files changed, 45 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 4a3a5f72ed4..52d42cdeeb9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -41,7 +41,7 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return -EINVAL; } @@ -52,13 +52,13 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, } if (buf->size >= SZ_1M) { - npages = (buf->size >> SECTION_SHIFT) + 1; + npages = buf->size >> SECTION_SHIFT; page_size = SECTION_SIZE; } else if (buf->size >= SZ_64K) { - npages = (buf->size >> 16) + 1; + npages = buf->size >> 16; page_size = SZ_64K; } else { - npages = (buf->size >> PAGE_SHIFT) + 1; + npages = buf->size >> PAGE_SHIFT; page_size = PAGE_SIZE; } @@ -119,9 +119,6 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, buf->pages[i] = phys_to_page(start_addr); - sgl = sg_next(sgl); - sg_set_page(sgl, buf->pages[i+1], end_addr - start_addr, 0); - DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", (unsigned long)buf->kvaddr, (unsigned long)buf->dma_addr, @@ -150,7 +147,7 @@ static void lowlevel_buffer_deallocate(struct drm_device *dev, * non-continuous memory would be released by exynos * gem framework. */ - if (flags & EXYNOS_BO_NONCONTIG) { + if (IS_NONCONTIG_BUFFER(flags)) { DRM_DEBUG_KMS("not support allocation type.\n"); return; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index fa1aa94a3d8..26d51979116 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -56,9 +56,28 @@ static unsigned int convert_to_vm_err_msg(int msg) return out_msg; } -static unsigned int mask_gem_flags(unsigned int flags) +static int check_gem_flags(unsigned int flags) { - return flags &= EXYNOS_BO_NONCONTIG; + if (flags & ~(EXYNOS_BO_MASK)) { + DRM_ERROR("invalid flags.\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long roundup_gem_size(unsigned long size, unsigned int flags) +{ + if (!IS_NONCONTIG_BUFFER(flags)) { + if (size >= SZ_1M) + return roundup(size, SECTION_SIZE); + else if (size >= SZ_64K) + return roundup(size, SZ_64K); + else + goto out; + } +out: + return roundup(size, PAGE_SIZE); } static struct page **exynos_gem_get_pages(struct drm_gem_object *obj, @@ -319,10 +338,17 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, struct exynos_drm_gem_buf *buf; int ret; - size = roundup(size, PAGE_SIZE); - DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size); + if (!size) { + DRM_ERROR("invalid size.\n"); + return ERR_PTR(-EINVAL); + } - flags = mask_gem_flags(flags); + size = roundup_gem_size(size, flags); + DRM_DEBUG_KMS("%s\n", __FILE__); + + ret = check_gem_flags(flags); + if (ret) + return ERR_PTR(ret); buf = exynos_drm_init_buf(dev, size); if (!buf) @@ -331,7 +357,7 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, exynos_gem_obj = exynos_drm_gem_init(dev, size); if (!exynos_gem_obj) { ret = -ENOMEM; - goto err; + goto err_fini_buf; } exynos_gem_obj->buffer = buf; @@ -347,18 +373,19 @@ struct exynos_drm_gem_obj *exynos_drm_gem_create(struct drm_device *dev, ret = exynos_drm_gem_get_pages(&exynos_gem_obj->base); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } else { ret = exynos_drm_alloc_buf(dev, buf, flags); if (ret < 0) { drm_gem_object_release(&exynos_gem_obj->base); - goto err; + goto err_fini_buf; } } return exynos_gem_obj; -err: + +err_fini_buf: exynos_drm_fini_buf(dev, buf); return ERR_PTR(ret); } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.h b/drivers/gpu/drm/exynos/exynos_drm_gem.h index e40fbad8b70..4ed84203950 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.h +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.h @@ -29,6 +29,8 @@ #define to_exynos_gem_obj(x) container_of(x,\ struct exynos_drm_gem_obj, base) +#define IS_NONCONTIG_BUFFER(f) (f & EXYNOS_BO_NONCONTIG) + /* * exynos drm gem buffer structure. * diff --git a/include/drm/exynos_drm.h b/include/drm/exynos_drm.h index 3963116083a..1bb2d471920 100644 --- a/include/drm/exynos_drm.h +++ b/include/drm/exynos_drm.h @@ -96,7 +96,8 @@ struct drm_exynos_plane_set_zpos { /* memory type definitions. */ enum e_drm_exynos_gem_mem_type { /* Physically Non-Continuous memory. */ - EXYNOS_BO_NONCONTIG = 1 << 0 + EXYNOS_BO_NONCONTIG = 1 << 0, + EXYNOS_BO_MASK = EXYNOS_BO_NONCONTIG }; #define DRM_EXYNOS_GEM_CREATE 0x00 -- cgit v1.2.3-70-g09d2 From 61db75d83ca2ac7d46b72fe94b253bbe277bb178 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 3 Apr 2012 21:49:15 +0900 Subject: drm/exynos: fixed duplicated page allocation bug. this patch fixes that buf->pages is allocated two times when it allocates physically continuous memory region and removes unnecessary codes. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_buf.c | 34 +++++++++------------------------ 1 file changed, 9 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_buf.c b/drivers/gpu/drm/exynos/exynos_drm_buf.c index 52d42cdeeb9..de8d2090bce 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_buf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_buf.c @@ -34,7 +34,7 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, unsigned int flags, struct exynos_drm_gem_buf *buf) { - dma_addr_t start_addr, end_addr; + dma_addr_t start_addr; unsigned int npages, page_size, i = 0; struct scatterlist *sgl; int ret = 0; @@ -76,26 +76,13 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, return -ENOMEM; } - buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size, - &buf->dma_addr, GFP_KERNEL); - if (!buf->kvaddr) { - DRM_ERROR("failed to allocate buffer.\n"); - ret = -ENOMEM; - goto err1; - } - - start_addr = buf->dma_addr; - end_addr = buf->dma_addr + buf->size; - - buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL); - if (!buf->pages) { - DRM_ERROR("failed to allocate pages.\n"); - ret = -ENOMEM; - goto err2; - } - - start_addr = buf->dma_addr; - end_addr = buf->dma_addr + buf->size; + buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size, + &buf->dma_addr, GFP_KERNEL); + if (!buf->kvaddr) { + DRM_ERROR("failed to allocate buffer.\n"); + ret = -ENOMEM; + goto err1; + } buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL); if (!buf->pages) { @@ -105,20 +92,17 @@ static int lowlevel_buffer_allocate(struct drm_device *dev, } sgl = buf->sgt->sgl; + start_addr = buf->dma_addr; while (i < npages) { buf->pages[i] = phys_to_page(start_addr); sg_set_page(sgl, buf->pages[i], page_size, 0); sg_dma_address(sgl) = start_addr; start_addr += page_size; - if (end_addr - start_addr < page_size) - break; sgl = sg_next(sgl); i++; } - buf->pages[i] = phys_to_page(start_addr); - DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n", (unsigned long)buf->kvaddr, (unsigned long)buf->dma_addr, -- cgit v1.2.3-70-g09d2 From 79026ff2b6e7bee5b79a61e0721b6d9bf0e99b56 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 3 Apr 2012 09:33:58 -0700 Subject: Input: tps6507x-ts - fix MODULE_ALIAS to match driver name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is needed to make module auto loading work. [dtor@mail.ru: remove file name from comment] Signed-off-by: Uwe Kleine-König Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tps6507x-ts.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 6c6f6d8ea9b..f7eda3d00fa 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -1,6 +1,4 @@ /* - * drivers/input/touchscreen/tps6507x_ts.c - * * Touchscreen driver for the tps6507x chip. * * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com) @@ -376,4 +374,4 @@ module_platform_driver(tps6507x_ts_driver); MODULE_AUTHOR("Todd Fischer "); MODULE_DESCRIPTION("TPS6507x - TouchScreen driver"); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:tps6507x-tsc"); +MODULE_ALIAS("platform:tps6507x-ts"); -- cgit v1.2.3-70-g09d2 From d626dad58f02e13730ded6ac84d6a9e53123f0e8 Mon Sep 17 00:00:00 2001 From: Oskari Saarenmaa Date: Tue, 3 Apr 2012 09:46:32 -0700 Subject: Input: sentelic - filter taps in absolute mode Taps in absolute positioning single-finger mode are currently reported as physical clicks by the driver. This should be handled by userspace, not the kernel. When a tap occurs, the FSP_PB0_LBTN bit is set, but the FSP_PB0_PHY_BTN is not. We use this to filter out physical clicks from taps. Signed-off-by: Oskari Saarenmaa Reviewed-by: Tai-hwa Liang Reviewed-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/sentelic.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index a977bfaa682..661a0ca3b3d 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -741,6 +741,14 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) } } else { /* SFAC packet */ + if ((packet[0] & (FSP_PB0_LBTN|FSP_PB0_PHY_BTN)) == + FSP_PB0_LBTN) { + /* On-pad click in SFAC mode should be handled + * by userspace. On-pad clicks in MFMC mode + * are real clickpad clicks, and not ignored. + */ + packet[0] &= ~FSP_PB0_LBTN; + } /* no multi-finger information */ ad->last_mt_fgr = 0; -- cgit v1.2.3-70-g09d2 From 6b1c762da98fd0d475a4539f94541aec91a8de30 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Thu, 5 Apr 2012 11:21:09 +0900 Subject: drm/exynos: add format list of plane NV12, NV12M and NV12MT are added to format list of plane to use these formats for hdmi vp layer. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_plane.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index c277a3a445f..f92fe4c6174 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -24,6 +24,10 @@ struct exynos_plane { static const uint32_t formats[] = { DRM_FORMAT_XRGB8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_NV12, + DRM_FORMAT_NV12M, + DRM_FORMAT_NV12MT, }; static int -- cgit v1.2.3-70-g09d2 From 75258723dadd99a214f00bff34fa0fc6e7b6d463 Mon Sep 17 00:00:00 2001 From: Michał Wróbel Date: Thu, 5 Apr 2012 20:34:21 +0800 Subject: crypto: ixp4xx - include fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Before commit de47725421ad5627a5c905f4e40bb844ebc06d29 ("include: replace linux/module.h with "struct module" wherever possible") was implicitly included through -> . Signed-off-by: Michał Wróbel Signed-off-by: Herbert Xu --- drivers/crypto/ixp4xx_crypto.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 0053d7ebb5c..8f3f74ce8c7 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From 6d27f09a6398ee086b11804aa3a16609876f0c7c Mon Sep 17 00:00:00 2001 From: Ryosuke Saito Date: Thu, 5 Apr 2012 08:09:34 -0600 Subject: mtip32xx: fix error handling in mtip_init() Ensure that block device is properly unregistered, if pci_register_driver() fails. Signed-off-by: Ryosuke Saito Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 04f69e6da1f..c37073ddf7d 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3605,18 +3605,25 @@ MODULE_DEVICE_TABLE(pci, mtip_pci_tbl); */ static int __init mtip_init(void) { + int error; + printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); /* Allocate a major block device number to use with this driver. */ - mtip_major = register_blkdev(0, MTIP_DRV_NAME); - if (mtip_major < 0) { + error = register_blkdev(0, MTIP_DRV_NAME); + if (error <= 0) { printk(KERN_ERR "Unable to register block device (%d)\n", - mtip_major); + error); return -EBUSY; } + mtip_major = error; /* Register our PCI operations. */ - return pci_register_driver(&mtip_pci_driver); + error = pci_register_driver(&mtip_pci_driver); + if (error) + unregister_blkdev(mtip_major, MTIP_DRV_NAME); + + return error; } /* -- cgit v1.2.3-70-g09d2 From 21b764e075e74f8af90da9f623aa3e2167484687 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 Apr 2012 16:10:35 -0700 Subject: ioat: ring size variables need to be 32bit to avoid overflow The alloc order can be up to 16 and 1 << 16 will over flow the 16bit integer. Change the appropriate variables to 16bit to avoid overflow. Reported-by: Jim Harris Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v2.c | 4 ++-- drivers/dma/ioat/dma_v2.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index cb8864d4560..143cb1b3cb2 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -575,9 +575,9 @@ bool reshape_ring(struct ioat2_dma_chan *ioat, int order) */ struct ioat_chan_common *chan = &ioat->base; struct dma_chan *c = &chan->common; - const u16 curr_size = ioat2_ring_size(ioat); + const u32 curr_size = ioat2_ring_size(ioat); const u16 active = ioat2_ring_active(ioat); - const u16 new_size = 1 << order; + const u32 new_size = 1 << order; struct ioat_ring_ent **ring; u16 i; diff --git a/drivers/dma/ioat/dma_v2.h b/drivers/dma/ioat/dma_v2.h index a2c413b2b8d..be2a55b95c2 100644 --- a/drivers/dma/ioat/dma_v2.h +++ b/drivers/dma/ioat/dma_v2.h @@ -74,7 +74,7 @@ static inline struct ioat2_dma_chan *to_ioat2_chan(struct dma_chan *c) return container_of(chan, struct ioat2_dma_chan, base); } -static inline u16 ioat2_ring_size(struct ioat2_dma_chan *ioat) +static inline u32 ioat2_ring_size(struct ioat2_dma_chan *ioat) { return 1 << ioat->alloc_order; } @@ -91,7 +91,7 @@ static inline u16 ioat2_ring_pending(struct ioat2_dma_chan *ioat) return CIRC_CNT(ioat->head, ioat->issued, ioat2_ring_size(ioat)); } -static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat) +static inline u32 ioat2_ring_space(struct ioat2_dma_chan *ioat) { return ioat2_ring_size(ioat) - ioat2_ring_active(ioat); } -- cgit v1.2.3-70-g09d2 From f26df1a1a9452573af7b6cea9a4723593e838568 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 Apr 2012 16:10:41 -0700 Subject: ioatdma: DMA copy alignment needed to address IOAT DMA silicon errata Silicon errata where when RAID and legacy descriptors are mixed, the legacy (memcpy and friends) operation must have alignment of 64 bytes to avoid hanging. This effects Intel Xeon C55xx, C35xx, E5-2600. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 2dbf32b0273..dfe925fa57a 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1147,6 +1147,44 @@ static int ioat3_reset_hw(struct ioat_chan_common *chan) return ioat2_reset_sync(chan, msecs_to_jiffies(200)); } +static bool is_jf_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_JSF0: + case PCI_DEVICE_ID_INTEL_IOAT_JSF1: + case PCI_DEVICE_ID_INTEL_IOAT_JSF2: + case PCI_DEVICE_ID_INTEL_IOAT_JSF3: + case PCI_DEVICE_ID_INTEL_IOAT_JSF4: + case PCI_DEVICE_ID_INTEL_IOAT_JSF5: + case PCI_DEVICE_ID_INTEL_IOAT_JSF6: + case PCI_DEVICE_ID_INTEL_IOAT_JSF7: + case PCI_DEVICE_ID_INTEL_IOAT_JSF8: + case PCI_DEVICE_ID_INTEL_IOAT_JSF9: + return true; + default: + return false; + } +} + +static bool is_snb_ioat(struct pci_dev *pdev) +{ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IOAT_SNB0: + case PCI_DEVICE_ID_INTEL_IOAT_SNB1: + case PCI_DEVICE_ID_INTEL_IOAT_SNB2: + case PCI_DEVICE_ID_INTEL_IOAT_SNB3: + case PCI_DEVICE_ID_INTEL_IOAT_SNB4: + case PCI_DEVICE_ID_INTEL_IOAT_SNB5: + case PCI_DEVICE_ID_INTEL_IOAT_SNB6: + case PCI_DEVICE_ID_INTEL_IOAT_SNB7: + case PCI_DEVICE_ID_INTEL_IOAT_SNB8: + case PCI_DEVICE_ID_INTEL_IOAT_SNB9: + return true; + default: + return false; + } +} + int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; @@ -1167,6 +1205,9 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_alloc_chan_resources = ioat2_alloc_chan_resources; dma->device_free_chan_resources = ioat2_free_chan_resources; + if (is_jf_ioat(pdev) || is_snb_ioat(pdev)) + dma->copy_align = 6; + dma_cap_set(DMA_INTERRUPT, dma->cap_mask); dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; -- cgit v1.2.3-70-g09d2 From a2bd1140a264b561e38d99e656cd843c2d840e86 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 4 Apr 2012 16:10:46 -0700 Subject: netdma: adding alignment check for NETDMA ops This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: David S. Miller Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 14 ++++++++++++++ include/linux/dmaengine.h | 1 + net/ipv4/tcp.c | 4 ++-- net/ipv4/tcp_input.c | 2 +- net/ipv4/tcp_ipv4.c | 2 +- net/ipv6/tcp_ipv6.c | 2 +- 6 files changed, 20 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a6c6051ec85..0f1ca74fe0b 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -332,6 +332,20 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) } EXPORT_SYMBOL(dma_find_channel); +/* + * net_dma_find_channel - find a channel for net_dma + * net_dma has alignment requirements + */ +struct dma_chan *net_dma_find_channel(void) +{ + struct dma_chan *chan = dma_find_channel(DMA_MEMCPY); + if (chan && !is_dma_copy_aligned(chan->device, 1, 1, 1)) + return NULL; + + return chan; +} +EXPORT_SYMBOL(net_dma_find_channel); + /** * dma_issue_pending_all - flush all pending operations across all channels */ diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 679b349d9b6..a5bb3ad5c7a 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -948,6 +948,7 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); +struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) /* --- Helper iov-locking functions --- */ diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 22ef5f9fd2f..8712c5d4f91 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1450,7 +1450,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if ((available < target) && (len > sysctl_tcp_dma_copybreak) && !(flags & MSG_PEEK) && !sysctl_tcp_low_latency && - dma_find_channel(DMA_MEMCPY)) { + net_dma_find_channel()) { preempt_enable_no_resched(); tp->ucopy.pinned_list = dma_pin_iovec_pages(msg->msg_iov, len); @@ -1665,7 +1665,7 @@ do_prequeue: if (!(flags & MSG_TRUNC)) { #ifdef CONFIG_NET_DMA if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) { tp->ucopy.dma_cookie = dma_skb_copy_datagram_iovec( diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b5e315f1364..27c676dfea3 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5190,7 +5190,7 @@ static int tcp_dma_try_early_copy(struct sock *sk, struct sk_buff *skb, return 0; if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan && skb_csum_unnecessary(skb)) { diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index fd54c5f8a25..3810b6fe0a1 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1727,7 +1727,7 @@ process: #ifdef CONFIG_NET_DMA struct tcp_sock *tp = tcp_sk(sk); if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) ret = tcp_v4_do_rcv(sk, skb); else diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 3edd05ae438..fcb3e4f0010 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1755,7 +1755,7 @@ process: #ifdef CONFIG_NET_DMA struct tcp_sock *tp = tcp_sk(sk); if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list) - tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY); + tp->ucopy.dma_chan = net_dma_find_channel(); if (tp->ucopy.dma_chan) ret = tcp_v6_do_rcv(sk, skb); else -- cgit v1.2.3-70-g09d2 From a8edc42a11e1d7b7e158d4026670fd83854dfcc2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 22 Mar 2012 14:01:07 -0700 Subject: usb: Put USB Kconfig items back under USB. commit 53c6bc24fdc8db87109a5760579cbb060fa644cf (usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.) Removed the dependency of the USB_ARCH_HAS_* symbols on USB_SUPPORT. However the resulting Kconfig somehow caused many of the USB configuration items to appear under the top level devices menu. To fix this we reunite the 'menuconfig USB_SUPPORT' with the 'if USB_SUPPORT', and the config items magically go back to their desired location. Reported-by: Julian Wollrath Reported-by: Nobuhiro Iwamatsu Reported-by: Borislav Petkov Reported-by: Rupesh Gujare Reported-by: Feng King Reported-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: David Daney Tested-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index cbd8f5f8059..76316a33061 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -2,14 +2,6 @@ # USB device configuration # -menuconfig USB_SUPPORT - bool "USB support" - depends on HAS_IOMEM - default y - ---help--- - This option adds core support for Universal Serial Bus (USB). - You will also need drivers from the following menu to make use of it. - # many non-PCI SOC chips embed OHCI config USB_ARCH_HAS_OHCI boolean @@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI boolean default PCI +menuconfig USB_SUPPORT + bool "USB support" + depends on HAS_IOMEM + default y + ---help--- + This option adds core support for Universal Serial Bus (USB). + You will also need drivers from the following menu to make use of it. + if USB_SUPPORT config USB_COMMON -- cgit v1.2.3-70-g09d2 From c825bab0cef8b90bab8b63eb5686b8c8eb22e798 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 19 Mar 2012 15:20:57 +0800 Subject: usb: storage: fix lockdep warning inside usb_stor_pre_reset(v2) This patch fixes one lockdep warning[1] inside usb_stor_pre_reset. If the current configuration includes multiple mass storage interfaces, the 'AA' lockdep warning will be triggered since the lock class of 'us->dev_mutex' is acquired two times in .reset path. It isn't a real deadlock, so just take the lockdep_set_class annotation to remove the warning. [1], lockdep warning log :[ INFO: possible recursive locking detected ] :3.3.0-0.rc5.git3.1.fc17.x86_64 #1 Tainted: G W :--------------------------------------------- :usb-storage/14846 is trying to acquire lock: : (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :but task is already holding lock: : (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :other info that might help us debug this: : Possible unsafe locking scenario: : CPU0 : ---- : lock(&(us->dev_mutex)); : lock(&(us->dev_mutex)); : *** DEADLOCK *** : May be due to missing lock nesting notation :2 locks held by usb-storage/14846: : #0: (&__lockdep_no_validate__){......}, at: [] usb_lock_device_for_reset+0x95/0x100 : #1: (&(us->dev_mutex)){+.+.+.}, at: [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] :stack backtrace: :Pid: 14846, comm: usb-storage Tainted: G W 3.3.0-0.rc5.git3.1.fc17.x86_64 #1 :Call Trace: : [] __lock_acquire+0x168f/0x1bb0 : [] ? native_sched_clock+0x13/0x80 : [] ? sched_clock+0x9/0x10 : [] ? sched_clock+0x9/0x10 : [] ? sched_clock_local+0x25/0xa0 : [] lock_acquire+0xa1/0x1e0 : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] mutex_lock_nested+0x76/0x3a0 : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] ? usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] usb_stor_pre_reset+0x1c/0x20 [usb_storage] : [] usb_reset_device+0x7d/0x190 : [] usb_stor_port_reset+0x7c/0x80 [usb_storage] : [] usb_stor_invoke_transport+0x94/0x560 [usb_storage] : [] ? mark_held_locks+0xb2/0x130 : [] ? _raw_spin_unlock_irq+0x30/0x50 : [] usb_stor_transparent_scsi_command+0xe/0x10 [usb_storage] : [] usb_stor_control_thread+0x173/0x280 [usb_storage] : [] ? fill_inquiry_response+0x20/0x20 [usb_storage] : [] kthread+0xb7/0xc0 : [] kernel_thread_helper+0x4/0x10 : [] ? retint_restore_args+0x13/0x13 : [] ? kthread_worker_fn+0x1a0/0x1a0 : [] ? gs_change+0x13/0x13 Reported-By: Dave Jones Signed-off-by: Ming Lei Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/usb.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c18538e4a6d..2653e73db62 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids = #undef COMPLIANT_DEV #undef USUAL_DEV +#ifdef CONFIG_LOCKDEP + +static struct lock_class_key us_interface_key[USB_MAXINTERFACES]; + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_config *config = udev->actconfig; + int i; + + for (i = 0; i < config->desc.bNumInterfaces; i++) { + if (config->interface[i] == intf) + break; + } + + BUG_ON(i == config->desc.bNumInterfaces); + + lockdep_set_class(mutex, &us_interface_key[i]); +} + +#else + +static void us_set_lock_class(struct mutex *mutex, + struct usb_interface *intf) +{ +} + +#endif #ifdef CONFIG_PM /* Minimal support for suspend and resume */ @@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus, *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); + us_set_lock_class(&us->dev_mutex, intf); init_completion(&us->cmnd_ready); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); -- cgit v1.2.3-70-g09d2 From bcf398537630bf20b4dbe59ba855b69f404c93cf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 22 Mar 2012 11:00:21 -0400 Subject: USB: don't clear urb->dev in scatter-gather library This patch (as1517b) fixes an error in the USB scatter-gather library. The library code uses urb->dev to determine whether or nor an URB is currently active; the completion handler sets urb->dev to NULL. However the core unlinking routines need to use urb->dev. Since unlinking always racing with completion, the completion handler must not clear urb->dev -- it can lead to invalid memory accesses when a transfer has to be cancelled. This patch fixes the problem by getting rid of the lines that clear urb->dev after urb has been submitted. As a result we may end up trying to unlink an URB that failed in submission or that has already completed, so an extra check is added after each unlink to avoid printing an error message when this happens. The checks are updated in both sg_complete() and sg_cancel(), and the second is updated to match the first (currently it prints out unnecessary warning messages if a device is unplugged while a transfer is in progress). Signed-off-by: Alan Stern Reported-and-tested-by: Illia Zaitsev CC: Ming Lei CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b3bdfede45e..aed3e07942d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb) retval = usb_unlink_urb(io->urbs [i]); if (retval != -EINPROGRESS && retval != -ENODEV && - retval != -EBUSY) + retval != -EBUSY && + retval != -EIDRM) dev_err(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); @@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb) } spin_lock(&io->lock); } - urb->dev = NULL; /* on the last completion, signal usb_sg_wait() */ io->bytes += urb->actual_length; @@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io) case -ENXIO: /* hc didn't queue this one */ case -EAGAIN: case -ENOMEM: - io->urbs[i]->dev = NULL; retval = 0; yield(); break; @@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io) /* fail any uncompleted urbs */ default: - io->urbs[i]->dev = NULL; io->urbs[i]->status = retval; dev_dbg(&io->dev->dev, "%s, submit --> %d\n", __func__, retval); @@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io) if (!io->urbs [i]->dev) continue; retval = usb_unlink_urb(io->urbs [i]); - if (retval != -EINPROGRESS && retval != -EBUSY) + if (retval != -EINPROGRESS + && retval != -ENODEV + && retval != -EBUSY + && retval != -EIDRM) dev_warn(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); } -- cgit v1.2.3-70-g09d2 From da8bfb090c2b30af9f3879443355f7eb1d0fe10a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:13:28 -0400 Subject: USB documentation: explain lifetime rules for unlinking URBs This patch (as1534c) updates the documentation for usb_unlink_urb and related functions. It explains that the caller must prevent the URB being unlinked from getting deallocated while the unlink is taking place. Signed-off-by: Alan Stern CC: Ming Lei Signed-off-by: Greg Kroah-Hartman --- Documentation/usb/URB.txt | 22 ++++++++++++++++++++++ drivers/usb/core/urb.c | 12 ++++++++++++ 2 files changed, 34 insertions(+) (limited to 'drivers') diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index 8ffce746d49..00d2c644068 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it they will get a -EPERM error. Thus you can be sure that when usb_kill_urb() returns, the URB is totally idle. +There is a lifetime issue to consider. An URB may complete at any +time, and the completion handler may free the URB. If this happens +while usb_unlink_urb or usb_kill_urb is running, it will cause a +memory-access violation. The driver is responsible for avoiding this, +which often means some sort of lock will be needed to prevent the URB +from being deallocated while it is still in use. + +On the other hand, since usb_unlink_urb may end up calling the +completion handler, the handler must not take any lock that is held +when usb_unlink_urb is invoked. The general solution to this problem +is to increment the URB's reference count while holding the lock, then +drop the lock and call usb_unlink_urb or usb_kill_urb, and then +decrement the URB's reference count. You increment the reference +count by calling + + struct urb *usb_get_urb(struct urb *urb) + +(ignore the return value; it is the same as the argument) and +decrement the reference count by calling usb_free_urb. Of course, +none of this is necessary if there's no danger of the URB being freed +by the completion handler. + 1.7. What about the completion handler? diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7239a73c1b8..cd9b3a2cd8a 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb); * never submitted, or it was unlinked before, or the hardware is already * finished with it), even if the completion handler has not yet run. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * Unlinking and Endpoint Queues: * * [The behaviors and guarantees described below do not apply to virtual @@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). @@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); * with error -EPERM. Thus even if the URB's completion handler always * tries to resubmit, it will not succeed and the URB will become idle. * + * The URB must not be deallocated while this routine is running. In + * particular, when a driver calls this routine, it must insure that the + * completion handler cannot deallocate the URB. + * * This routine may not be used in an interrupt context (such as a bottom * half or a completion handler), or when holding a spinlock, or in other * situations where the caller can't schedule(). -- cgit v1.2.3-70-g09d2 From a2457ee691edeffb511dbff9a69008f480192197 Mon Sep 17 00:00:00 2001 From: Michael BRIGHT Date: Thu, 22 Mar 2012 18:42:52 +0100 Subject: USB: remove compile warning on gadget/inode.c Removed unused "restart:" label, which was causing compiler warning. Signed-off-by: Michael BRIGHT Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/inode.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 8793f32bab1..e58b1644297 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev) DBG (dev, "%s %d\n", __func__, dev->state); /* dev->state must prevent interference */ -restart: spin_lock_irq (&dev->lock); while (!list_empty(&dev->epfiles)) { struct ep_data *ep; -- cgit v1.2.3-70-g09d2 From c3d8b76f61586714cdc5f219ba45592a54caaa55 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 21 Mar 2012 20:15:18 +0100 Subject: serial: PL011: move interrupt clearing Commit 360f748b204275229f8398cb2f9f53955db1503b "serial: PL011: clear pending interrupts" attempts to clear interrupts by writing to a yet-unassigned memory address. This fixes the issue. The breaking patch is marked for stable so should be carried along with the other patch. Cc: Shreshtha Kumar Sahu Cc: Russell King Cc: stable Cc: Nicolas Pitre Reported-by: Viresh Kumar Signed-off-by: Linus Walleij Tested-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 0c65c9e6698..3d569cd68f5 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto unmap; } - /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; @@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.line = i; pl011_dma_probe(uap); + /* Ensure interrupts from this UART are masked and cleared */ + writew(0, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); amba_ports[i] = uap; -- cgit v1.2.3-70-g09d2 From ef798d0207e02e05bfabc7ba96e8a6f2cc07066e Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Wed, 21 Mar 2012 23:36:50 +0100 Subject: kyrofb: fix on x86_64 kyrofb is completely broken on x86_64 because the registers are defined as unsigned long. Change them to u32 to make the driver work. Tested with Hercules 3D Prophet 4000XT. Signed-off-by: Ondrej Zary Acked-by: Paul Mundt Signed-off-by: Florian Tobias Schandinat --- drivers/video/kyro/STG4000Reg.h | 376 ++++++++++++++++++++-------------------- 1 file changed, 188 insertions(+), 188 deletions(-) (limited to 'drivers') diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/kyro/STG4000Reg.h index 5d626988258..50f4670e925 100644 --- a/drivers/video/kyro/STG4000Reg.h +++ b/drivers/video/kyro/STG4000Reg.h @@ -73,210 +73,210 @@ typedef enum _OVRL_PIX_FORMAT { /* Register Table */ typedef struct { /* 0h */ - volatile unsigned long Thread0Enable; /* 0x0000 */ - volatile unsigned long Thread1Enable; /* 0x0004 */ - volatile unsigned long Thread0Recover; /* 0x0008 */ - volatile unsigned long Thread1Recover; /* 0x000C */ - volatile unsigned long Thread0Step; /* 0x0010 */ - volatile unsigned long Thread1Step; /* 0x0014 */ - volatile unsigned long VideoInStatus; /* 0x0018 */ - volatile unsigned long Core2InSignStart; /* 0x001C */ - volatile unsigned long Core1ResetVector; /* 0x0020 */ - volatile unsigned long Core1ROMOffset; /* 0x0024 */ - volatile unsigned long Core1ArbiterPriority; /* 0x0028 */ - volatile unsigned long VideoInControl; /* 0x002C */ - volatile unsigned long VideoInReg0CtrlA; /* 0x0030 */ - volatile unsigned long VideoInReg0CtrlB; /* 0x0034 */ - volatile unsigned long VideoInReg1CtrlA; /* 0x0038 */ - volatile unsigned long VideoInReg1CtrlB; /* 0x003C */ - volatile unsigned long Thread0Kicker; /* 0x0040 */ - volatile unsigned long Core2InputSign; /* 0x0044 */ - volatile unsigned long Thread0ProgCtr; /* 0x0048 */ - volatile unsigned long Thread1ProgCtr; /* 0x004C */ - volatile unsigned long Thread1Kicker; /* 0x0050 */ - volatile unsigned long GPRegister1; /* 0x0054 */ - volatile unsigned long GPRegister2; /* 0x0058 */ - volatile unsigned long GPRegister3; /* 0x005C */ - volatile unsigned long GPRegister4; /* 0x0060 */ - volatile unsigned long SerialIntA; /* 0x0064 */ - - volatile unsigned long Fill0[6]; /* GAP 0x0068 - 0x007C */ - - volatile unsigned long SoftwareReset; /* 0x0080 */ - volatile unsigned long SerialIntB; /* 0x0084 */ - - volatile unsigned long Fill1[37]; /* GAP 0x0088 - 0x011C */ - - volatile unsigned long ROMELQV; /* 0x011C */ - volatile unsigned long WLWH; /* 0x0120 */ - volatile unsigned long ROMELWL; /* 0x0124 */ - - volatile unsigned long dwFill_1; /* GAP 0x0128 */ - - volatile unsigned long IntStatus; /* 0x012C */ - volatile unsigned long IntMask; /* 0x0130 */ - volatile unsigned long IntClear; /* 0x0134 */ - - volatile unsigned long Fill2[6]; /* GAP 0x0138 - 0x014C */ - - volatile unsigned long ROMGPIOA; /* 0x0150 */ - volatile unsigned long ROMGPIOB; /* 0x0154 */ - volatile unsigned long ROMGPIOC; /* 0x0158 */ - volatile unsigned long ROMGPIOD; /* 0x015C */ - - volatile unsigned long Fill3[2]; /* GAP 0x0160 - 0x0168 */ - - volatile unsigned long AGPIntID; /* 0x0168 */ - volatile unsigned long AGPIntClassCode; /* 0x016C */ - volatile unsigned long AGPIntBIST; /* 0x0170 */ - volatile unsigned long AGPIntSSID; /* 0x0174 */ - volatile unsigned long AGPIntPMCSR; /* 0x0178 */ - volatile unsigned long VGAFrameBufBase; /* 0x017C */ - volatile unsigned long VGANotify; /* 0x0180 */ - volatile unsigned long DACPLLMode; /* 0x0184 */ - volatile unsigned long Core1VideoClockDiv; /* 0x0188 */ - volatile unsigned long AGPIntStat; /* 0x018C */ + volatile u32 Thread0Enable; /* 0x0000 */ + volatile u32 Thread1Enable; /* 0x0004 */ + volatile u32 Thread0Recover; /* 0x0008 */ + volatile u32 Thread1Recover; /* 0x000C */ + volatile u32 Thread0Step; /* 0x0010 */ + volatile u32 Thread1Step; /* 0x0014 */ + volatile u32 VideoInStatus; /* 0x0018 */ + volatile u32 Core2InSignStart; /* 0x001C */ + volatile u32 Core1ResetVector; /* 0x0020 */ + volatile u32 Core1ROMOffset; /* 0x0024 */ + volatile u32 Core1ArbiterPriority; /* 0x0028 */ + volatile u32 VideoInControl; /* 0x002C */ + volatile u32 VideoInReg0CtrlA; /* 0x0030 */ + volatile u32 VideoInReg0CtrlB; /* 0x0034 */ + volatile u32 VideoInReg1CtrlA; /* 0x0038 */ + volatile u32 VideoInReg1CtrlB; /* 0x003C */ + volatile u32 Thread0Kicker; /* 0x0040 */ + volatile u32 Core2InputSign; /* 0x0044 */ + volatile u32 Thread0ProgCtr; /* 0x0048 */ + volatile u32 Thread1ProgCtr; /* 0x004C */ + volatile u32 Thread1Kicker; /* 0x0050 */ + volatile u32 GPRegister1; /* 0x0054 */ + volatile u32 GPRegister2; /* 0x0058 */ + volatile u32 GPRegister3; /* 0x005C */ + volatile u32 GPRegister4; /* 0x0060 */ + volatile u32 SerialIntA; /* 0x0064 */ + + volatile u32 Fill0[6]; /* GAP 0x0068 - 0x007C */ + + volatile u32 SoftwareReset; /* 0x0080 */ + volatile u32 SerialIntB; /* 0x0084 */ + + volatile u32 Fill1[37]; /* GAP 0x0088 - 0x011C */ + + volatile u32 ROMELQV; /* 0x011C */ + volatile u32 WLWH; /* 0x0120 */ + volatile u32 ROMELWL; /* 0x0124 */ + + volatile u32 dwFill_1; /* GAP 0x0128 */ + + volatile u32 IntStatus; /* 0x012C */ + volatile u32 IntMask; /* 0x0130 */ + volatile u32 IntClear; /* 0x0134 */ + + volatile u32 Fill2[6]; /* GAP 0x0138 - 0x014C */ + + volatile u32 ROMGPIOA; /* 0x0150 */ + volatile u32 ROMGPIOB; /* 0x0154 */ + volatile u32 ROMGPIOC; /* 0x0158 */ + volatile u32 ROMGPIOD; /* 0x015C */ + + volatile u32 Fill3[2]; /* GAP 0x0160 - 0x0168 */ + + volatile u32 AGPIntID; /* 0x0168 */ + volatile u32 AGPIntClassCode; /* 0x016C */ + volatile u32 AGPIntBIST; /* 0x0170 */ + volatile u32 AGPIntSSID; /* 0x0174 */ + volatile u32 AGPIntPMCSR; /* 0x0178 */ + volatile u32 VGAFrameBufBase; /* 0x017C */ + volatile u32 VGANotify; /* 0x0180 */ + volatile u32 DACPLLMode; /* 0x0184 */ + volatile u32 Core1VideoClockDiv; /* 0x0188 */ + volatile u32 AGPIntStat; /* 0x018C */ /* - volatile unsigned long Fill4[0x0400/4 - 0x0190/4]; //GAP 0x0190 - 0x0400 - volatile unsigned long Fill5[0x05FC/4 - 0x0400/4]; //GAP 0x0400 - 0x05FC Fog Table - volatile unsigned long Fill6[0x0604/4 - 0x0600/4]; //GAP 0x0600 - 0x0604 - volatile unsigned long Fill7[0x0680/4 - 0x0608/4]; //GAP 0x0608 - 0x0680 - volatile unsigned long Fill8[0x07FC/4 - 0x0684/4]; //GAP 0x0684 - 0x07FC + volatile u32 Fill4[0x0400/4 - 0x0190/4]; //GAP 0x0190 - 0x0400 + volatile u32 Fill5[0x05FC/4 - 0x0400/4]; //GAP 0x0400 - 0x05FC Fog Table + volatile u32 Fill6[0x0604/4 - 0x0600/4]; //GAP 0x0600 - 0x0604 + volatile u32 Fill7[0x0680/4 - 0x0608/4]; //GAP 0x0608 - 0x0680 + volatile u32 Fill8[0x07FC/4 - 0x0684/4]; //GAP 0x0684 - 0x07FC */ - volatile unsigned long Fill4[412]; /* 0x0190 - 0x07FC */ - - volatile unsigned long TACtrlStreamBase; /* 0x0800 */ - volatile unsigned long TAObjDataBase; /* 0x0804 */ - volatile unsigned long TAPtrDataBase; /* 0x0808 */ - volatile unsigned long TARegionDataBase; /* 0x080C */ - volatile unsigned long TATailPtrBase; /* 0x0810 */ - volatile unsigned long TAPtrRegionSize; /* 0x0814 */ - volatile unsigned long TAConfiguration; /* 0x0818 */ - volatile unsigned long TAObjDataStartAddr; /* 0x081C */ - volatile unsigned long TAObjDataEndAddr; /* 0x0820 */ - volatile unsigned long TAXScreenClip; /* 0x0824 */ - volatile unsigned long TAYScreenClip; /* 0x0828 */ - volatile unsigned long TARHWClamp; /* 0x082C */ - volatile unsigned long TARHWCompare; /* 0x0830 */ - volatile unsigned long TAStart; /* 0x0834 */ - volatile unsigned long TAObjReStart; /* 0x0838 */ - volatile unsigned long TAPtrReStart; /* 0x083C */ - volatile unsigned long TAStatus1; /* 0x0840 */ - volatile unsigned long TAStatus2; /* 0x0844 */ - volatile unsigned long TAIntStatus; /* 0x0848 */ - volatile unsigned long TAIntMask; /* 0x084C */ - - volatile unsigned long Fill5[235]; /* GAP 0x0850 - 0x0BF8 */ - - volatile unsigned long TextureAddrThresh; /* 0x0BFC */ - volatile unsigned long Core1Translation; /* 0x0C00 */ - volatile unsigned long TextureAddrReMap; /* 0x0C04 */ - volatile unsigned long RenderOutAGPRemap; /* 0x0C08 */ - volatile unsigned long _3DRegionReadTrans; /* 0x0C0C */ - volatile unsigned long _3DPtrReadTrans; /* 0x0C10 */ - volatile unsigned long _3DParamReadTrans; /* 0x0C14 */ - volatile unsigned long _3DRegionReadThresh; /* 0x0C18 */ - volatile unsigned long _3DPtrReadThresh; /* 0x0C1C */ - volatile unsigned long _3DParamReadThresh; /* 0x0C20 */ - volatile unsigned long _3DRegionReadAGPRemap; /* 0x0C24 */ - volatile unsigned long _3DPtrReadAGPRemap; /* 0x0C28 */ - volatile unsigned long _3DParamReadAGPRemap; /* 0x0C2C */ - volatile unsigned long ZBufferAGPRemap; /* 0x0C30 */ - volatile unsigned long TAIndexAGPRemap; /* 0x0C34 */ - volatile unsigned long TAVertexAGPRemap; /* 0x0C38 */ - volatile unsigned long TAUVAddrTrans; /* 0x0C3C */ - volatile unsigned long TATailPtrCacheTrans; /* 0x0C40 */ - volatile unsigned long TAParamWriteTrans; /* 0x0C44 */ - volatile unsigned long TAPtrWriteTrans; /* 0x0C48 */ - volatile unsigned long TAParamWriteThresh; /* 0x0C4C */ - volatile unsigned long TAPtrWriteThresh; /* 0x0C50 */ - volatile unsigned long TATailPtrCacheAGPRe; /* 0x0C54 */ - volatile unsigned long TAParamWriteAGPRe; /* 0x0C58 */ - volatile unsigned long TAPtrWriteAGPRe; /* 0x0C5C */ - volatile unsigned long SDRAMArbiterConf; /* 0x0C60 */ - volatile unsigned long SDRAMConf0; /* 0x0C64 */ - volatile unsigned long SDRAMConf1; /* 0x0C68 */ - volatile unsigned long SDRAMConf2; /* 0x0C6C */ - volatile unsigned long SDRAMRefresh; /* 0x0C70 */ - volatile unsigned long SDRAMPowerStat; /* 0x0C74 */ - - volatile unsigned long Fill6[2]; /* GAP 0x0C78 - 0x0C7C */ - - volatile unsigned long RAMBistData; /* 0x0C80 */ - volatile unsigned long RAMBistCtrl; /* 0x0C84 */ - volatile unsigned long FIFOBistKey; /* 0x0C88 */ - volatile unsigned long RAMBistResult; /* 0x0C8C */ - volatile unsigned long FIFOBistResult; /* 0x0C90 */ + volatile u32 Fill4[412]; /* 0x0190 - 0x07FC */ + + volatile u32 TACtrlStreamBase; /* 0x0800 */ + volatile u32 TAObjDataBase; /* 0x0804 */ + volatile u32 TAPtrDataBase; /* 0x0808 */ + volatile u32 TARegionDataBase; /* 0x080C */ + volatile u32 TATailPtrBase; /* 0x0810 */ + volatile u32 TAPtrRegionSize; /* 0x0814 */ + volatile u32 TAConfiguration; /* 0x0818 */ + volatile u32 TAObjDataStartAddr; /* 0x081C */ + volatile u32 TAObjDataEndAddr; /* 0x0820 */ + volatile u32 TAXScreenClip; /* 0x0824 */ + volatile u32 TAYScreenClip; /* 0x0828 */ + volatile u32 TARHWClamp; /* 0x082C */ + volatile u32 TARHWCompare; /* 0x0830 */ + volatile u32 TAStart; /* 0x0834 */ + volatile u32 TAObjReStart; /* 0x0838 */ + volatile u32 TAPtrReStart; /* 0x083C */ + volatile u32 TAStatus1; /* 0x0840 */ + volatile u32 TAStatus2; /* 0x0844 */ + volatile u32 TAIntStatus; /* 0x0848 */ + volatile u32 TAIntMask; /* 0x084C */ + + volatile u32 Fill5[235]; /* GAP 0x0850 - 0x0BF8 */ + + volatile u32 TextureAddrThresh; /* 0x0BFC */ + volatile u32 Core1Translation; /* 0x0C00 */ + volatile u32 TextureAddrReMap; /* 0x0C04 */ + volatile u32 RenderOutAGPRemap; /* 0x0C08 */ + volatile u32 _3DRegionReadTrans; /* 0x0C0C */ + volatile u32 _3DPtrReadTrans; /* 0x0C10 */ + volatile u32 _3DParamReadTrans; /* 0x0C14 */ + volatile u32 _3DRegionReadThresh; /* 0x0C18 */ + volatile u32 _3DPtrReadThresh; /* 0x0C1C */ + volatile u32 _3DParamReadThresh; /* 0x0C20 */ + volatile u32 _3DRegionReadAGPRemap; /* 0x0C24 */ + volatile u32 _3DPtrReadAGPRemap; /* 0x0C28 */ + volatile u32 _3DParamReadAGPRemap; /* 0x0C2C */ + volatile u32 ZBufferAGPRemap; /* 0x0C30 */ + volatile u32 TAIndexAGPRemap; /* 0x0C34 */ + volatile u32 TAVertexAGPRemap; /* 0x0C38 */ + volatile u32 TAUVAddrTrans; /* 0x0C3C */ + volatile u32 TATailPtrCacheTrans; /* 0x0C40 */ + volatile u32 TAParamWriteTrans; /* 0x0C44 */ + volatile u32 TAPtrWriteTrans; /* 0x0C48 */ + volatile u32 TAParamWriteThresh; /* 0x0C4C */ + volatile u32 TAPtrWriteThresh; /* 0x0C50 */ + volatile u32 TATailPtrCacheAGPRe; /* 0x0C54 */ + volatile u32 TAParamWriteAGPRe; /* 0x0C58 */ + volatile u32 TAPtrWriteAGPRe; /* 0x0C5C */ + volatile u32 SDRAMArbiterConf; /* 0x0C60 */ + volatile u32 SDRAMConf0; /* 0x0C64 */ + volatile u32 SDRAMConf1; /* 0x0C68 */ + volatile u32 SDRAMConf2; /* 0x0C6C */ + volatile u32 SDRAMRefresh; /* 0x0C70 */ + volatile u32 SDRAMPowerStat; /* 0x0C74 */ + + volatile u32 Fill6[2]; /* GAP 0x0C78 - 0x0C7C */ + + volatile u32 RAMBistData; /* 0x0C80 */ + volatile u32 RAMBistCtrl; /* 0x0C84 */ + volatile u32 FIFOBistKey; /* 0x0C88 */ + volatile u32 RAMBistResult; /* 0x0C8C */ + volatile u32 FIFOBistResult; /* 0x0C90 */ /* - volatile unsigned long Fill11[0x0CBC/4 - 0x0C94/4]; //GAP 0x0C94 - 0x0CBC - volatile unsigned long Fill12[0x0CD0/4 - 0x0CC0/4]; //GAP 0x0CC0 - 0x0CD0 3DRegisters + volatile u32 Fill11[0x0CBC/4 - 0x0C94/4]; //GAP 0x0C94 - 0x0CBC + volatile u32 Fill12[0x0CD0/4 - 0x0CC0/4]; //GAP 0x0CC0 - 0x0CD0 3DRegisters */ - volatile unsigned long Fill7[16]; /* 0x0c94 - 0x0cd0 */ + volatile u32 Fill7[16]; /* 0x0c94 - 0x0cd0 */ - volatile unsigned long SDRAMAddrSign; /* 0x0CD4 */ - volatile unsigned long SDRAMDataSign; /* 0x0CD8 */ - volatile unsigned long SDRAMSignConf; /* 0x0CDC */ + volatile u32 SDRAMAddrSign; /* 0x0CD4 */ + volatile u32 SDRAMDataSign; /* 0x0CD8 */ + volatile u32 SDRAMSignConf; /* 0x0CDC */ /* DWFILL; //GAP 0x0CE0 */ - volatile unsigned long dwFill_2; - - volatile unsigned long ISPSignature; /* 0x0CE4 */ - - volatile unsigned long Fill8[454]; /*GAP 0x0CE8 - 0x13FC */ - - volatile unsigned long DACPrimAddress; /* 0x1400 */ - volatile unsigned long DACPrimSize; /* 0x1404 */ - volatile unsigned long DACCursorAddr; /* 0x1408 */ - volatile unsigned long DACCursorCtrl; /* 0x140C */ - volatile unsigned long DACOverlayAddr; /* 0x1410 */ - volatile unsigned long DACOverlayUAddr; /* 0x1414 */ - volatile unsigned long DACOverlayVAddr; /* 0x1418 */ - volatile unsigned long DACOverlaySize; /* 0x141C */ - volatile unsigned long DACOverlayVtDec; /* 0x1420 */ - - volatile unsigned long Fill9[9]; /* GAP 0x1424 - 0x1444 */ - - volatile unsigned long DACVerticalScal; /* 0x1448 */ - volatile unsigned long DACPixelFormat; /* 0x144C */ - volatile unsigned long DACHorizontalScal; /* 0x1450 */ - volatile unsigned long DACVidWinStart; /* 0x1454 */ - volatile unsigned long DACVidWinEnd; /* 0x1458 */ - volatile unsigned long DACBlendCtrl; /* 0x145C */ - volatile unsigned long DACHorTim1; /* 0x1460 */ - volatile unsigned long DACHorTim2; /* 0x1464 */ - volatile unsigned long DACHorTim3; /* 0x1468 */ - volatile unsigned long DACVerTim1; /* 0x146C */ - volatile unsigned long DACVerTim2; /* 0x1470 */ - volatile unsigned long DACVerTim3; /* 0x1474 */ - volatile unsigned long DACBorderColor; /* 0x1478 */ - volatile unsigned long DACSyncCtrl; /* 0x147C */ - volatile unsigned long DACStreamCtrl; /* 0x1480 */ - volatile unsigned long DACLUTAddress; /* 0x1484 */ - volatile unsigned long DACLUTData; /* 0x1488 */ - volatile unsigned long DACBurstCtrl; /* 0x148C */ - volatile unsigned long DACCrcTrigger; /* 0x1490 */ - volatile unsigned long DACCrcDone; /* 0x1494 */ - volatile unsigned long DACCrcResult1; /* 0x1498 */ - volatile unsigned long DACCrcResult2; /* 0x149C */ - volatile unsigned long DACLinecount; /* 0x14A0 */ - - volatile unsigned long Fill10[151]; /*GAP 0x14A4 - 0x16FC */ - - volatile unsigned long DigVidPortCtrl; /* 0x1700 */ - volatile unsigned long DigVidPortStat; /* 0x1704 */ + volatile u32 dwFill_2; + + volatile u32 ISPSignature; /* 0x0CE4 */ + + volatile u32 Fill8[454]; /*GAP 0x0CE8 - 0x13FC */ + + volatile u32 DACPrimAddress; /* 0x1400 */ + volatile u32 DACPrimSize; /* 0x1404 */ + volatile u32 DACCursorAddr; /* 0x1408 */ + volatile u32 DACCursorCtrl; /* 0x140C */ + volatile u32 DACOverlayAddr; /* 0x1410 */ + volatile u32 DACOverlayUAddr; /* 0x1414 */ + volatile u32 DACOverlayVAddr; /* 0x1418 */ + volatile u32 DACOverlaySize; /* 0x141C */ + volatile u32 DACOverlayVtDec; /* 0x1420 */ + + volatile u32 Fill9[9]; /* GAP 0x1424 - 0x1444 */ + + volatile u32 DACVerticalScal; /* 0x1448 */ + volatile u32 DACPixelFormat; /* 0x144C */ + volatile u32 DACHorizontalScal; /* 0x1450 */ + volatile u32 DACVidWinStart; /* 0x1454 */ + volatile u32 DACVidWinEnd; /* 0x1458 */ + volatile u32 DACBlendCtrl; /* 0x145C */ + volatile u32 DACHorTim1; /* 0x1460 */ + volatile u32 DACHorTim2; /* 0x1464 */ + volatile u32 DACHorTim3; /* 0x1468 */ + volatile u32 DACVerTim1; /* 0x146C */ + volatile u32 DACVerTim2; /* 0x1470 */ + volatile u32 DACVerTim3; /* 0x1474 */ + volatile u32 DACBorderColor; /* 0x1478 */ + volatile u32 DACSyncCtrl; /* 0x147C */ + volatile u32 DACStreamCtrl; /* 0x1480 */ + volatile u32 DACLUTAddress; /* 0x1484 */ + volatile u32 DACLUTData; /* 0x1488 */ + volatile u32 DACBurstCtrl; /* 0x148C */ + volatile u32 DACCrcTrigger; /* 0x1490 */ + volatile u32 DACCrcDone; /* 0x1494 */ + volatile u32 DACCrcResult1; /* 0x1498 */ + volatile u32 DACCrcResult2; /* 0x149C */ + volatile u32 DACLinecount; /* 0x14A0 */ + + volatile u32 Fill10[151]; /*GAP 0x14A4 - 0x16FC */ + + volatile u32 DigVidPortCtrl; /* 0x1700 */ + volatile u32 DigVidPortStat; /* 0x1704 */ /* - volatile unsigned long Fill11[0x1FFC/4 - 0x1708/4]; //GAP 0x1708 - 0x1FFC - volatile unsigned long Fill17[0x3000/4 - 0x2FFC/4]; //GAP 0x2000 - 0x2FFC ALUT + volatile u32 Fill11[0x1FFC/4 - 0x1708/4]; //GAP 0x1708 - 0x1FFC + volatile u32 Fill17[0x3000/4 - 0x2FFC/4]; //GAP 0x2000 - 0x2FFC ALUT */ - volatile unsigned long Fill11[1598]; + volatile u32 Fill11[1598]; /* DWFILL; //GAP 0x3000 ALUT 256MB offset */ - volatile unsigned long Fill_3; + volatile u32 Fill_3; } STG4000REG; -- cgit v1.2.3-70-g09d2 From 93019734555f8df32239c5922fe2b770c0a08eaa Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 24 Mar 2012 11:38:02 +0100 Subject: fbdev: fix au1*fb builds Commit 1c16697bf9d5b206cb0d2b905a54de5e077296be ("drivers/video/au*fb.c: use devm_ functions) introduced 2 build failures in the au1100fb and au1200fb drivers, fix them. Signed-off-by: Manuel Lauss Signed-off-by: Florian Tobias Schandinat --- drivers/video/au1100fb.c | 5 +++-- drivers/video/au1200fb.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index befcbd8ef01..ffbce452546 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -499,7 +499,8 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) au1100fb_fix.mmio_start = regs_res->start; au1100fb_fix.mmio_len = resource_size(regs_res); - if (!devm_request_mem_region(au1100fb_fix.mmio_start, + if (!devm_request_mem_region(&dev->dev, + au1100fb_fix.mmio_start, au1100fb_fix.mmio_len, DRIVER_NAME)) { print_err("fail to lock memory region at 0x%08lx", @@ -516,7 +517,7 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres * (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS; - fbdev->fb_mem = dmam_alloc_coherent(&dev->dev, &dev->dev, + fbdev->fb_mem = dmam_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 3e9a773db09..7ca79f02056 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -1724,7 +1724,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) /* Allocate the framebuffer to the maximum screen size */ fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8; - fbdev->fb_mem = dmam_alloc_noncoherent(&dev->dev, &dev->dev, + fbdev->fb_mem = dmam_alloc_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { -- cgit v1.2.3-70-g09d2 From c65390f4dd49755863f6d772ec538ee4757c08d7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 9 Apr 2012 01:36:28 -0400 Subject: fix breakage in mtdchar_open(), sanitize failure exits simple_release_fs() should be only done on failure there. Signed-off-by: Al Viro --- drivers/mtd/mtdchar.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 94eb05b1afd..58fc65f5c81 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -106,16 +106,14 @@ static int mtdchar_open(struct inode *inode, struct file *file) } if (mtd->type == MTD_ABSENT) { - put_mtd_device(mtd); ret = -ENODEV; - goto out; + goto out1; } mtd_ino = iget_locked(mnt->mnt_sb, devnum); if (!mtd_ino) { - put_mtd_device(mtd); ret = -ENOMEM; - goto out; + goto out1; } if (mtd_ino->i_state & I_NEW) { mtd_ino->i_private = mtd; @@ -127,23 +125,25 @@ static int mtdchar_open(struct inode *inode, struct file *file) /* You can't open it RW if it's not a writeable device */ if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) { - iput(mtd_ino); - put_mtd_device(mtd); ret = -EACCES; - goto out; + goto out2; } mfi = kzalloc(sizeof(*mfi), GFP_KERNEL); if (!mfi) { - iput(mtd_ino); - put_mtd_device(mtd); ret = -ENOMEM; - goto out; + goto out2; } mfi->ino = mtd_ino; mfi->mtd = mtd; file->private_data = mfi; + mutex_unlock(&mtd_mutex); + return 0; +out2: + iput(mtd_ino); +out1: + put_mtd_device(mtd); out: mutex_unlock(&mtd_mutex); simple_release_fs(&mnt, &count); -- cgit v1.2.3-70-g09d2 From 45038367c271f83b649b16551bf2d8174b203cb9 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:38 +0200 Subject: mtip32xx: Add new bitwise flag 'dd_flag' * Merged the following flags into one variable 'dd_flag': * drv_cleanup_done * resumeflag * Added the following flags into 'dd_flag' * remove pending * init done * Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags) Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 211 +++++++++++++++++++++++++++++--------- drivers/block/mtip32xx/mtip32xx.h | 12 ++- 2 files changed, 168 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index c37073ddf7d..34b395d2d98 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -36,6 +36,7 @@ #include #include #include <../drivers/ata/ahci.h> +#include #include "mtip32xx.h" #define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32) @@ -44,6 +45,7 @@ #define HW_PORT_PRIV_DMA_SZ \ (HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ) +#define HOST_CAP_NZDMA (1 << 19) #define HOST_HSORG 0xFC #define HSORG_DISABLE_SLOTGRP_INTR (1<<24) #define HSORG_DISABLE_SLOTGRP_PXIS (1<<16) @@ -139,6 +141,12 @@ static void mtip_command_cleanup(struct driver_data *dd) int group = 0, commandslot = 0, commandindex = 0; struct mtip_cmd *command; struct mtip_port *port = dd->port; + static int in_progress; + + if (in_progress) + return; + + in_progress = 1; for (group = 0; group < 4; group++) { for (commandslot = 0; commandslot < 32; commandslot++) { @@ -165,7 +173,8 @@ static void mtip_command_cleanup(struct driver_data *dd) up(&port->cmd_slot); - atomic_set(&dd->drv_cleanup_done, true); + set_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag); + in_progress = 0; } /* @@ -262,6 +271,9 @@ static int hba_reset_nosleep(struct driver_data *dd) && time_before(jiffies, timeout)) mdelay(1); + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) + return -1; + if (readl(dd->mmio + HOST_CTL) & HOST_RESET) return -1; @@ -451,6 +463,9 @@ static void mtip_restart_port(struct mtip_port *port) && time_before(jiffies, timeout)) ; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + /* * Chip quirk: escalate to hba reset if * PxCMD.CR not clear after 500 ms @@ -479,6 +494,9 @@ static void mtip_restart_port(struct mtip_port *port) while (time_before(jiffies, timeout)) ; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + /* Clear PxSCTL.DET */ writel(readl(port->mmio + PORT_SCR_CTL) & ~1, port->mmio + PORT_SCR_CTL); @@ -490,6 +508,9 @@ static void mtip_restart_port(struct mtip_port *port) && time_before(jiffies, timeout)) ; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return; + if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) dev_warn(&port->dd->pdev->dev, "COM reset failed\n"); @@ -520,7 +541,7 @@ static void mtip_timeout_function(unsigned long int data) if (unlikely(!port)) return; - if (atomic_read(&port->dd->resumeflag) == true) { + if (test_bit(MTIP_DD_FLAG_RESUME_BIT, &port->dd->dd_flag)) { mod_timer(&port->cmd_timer, jiffies + msecs_to_jiffies(30000)); return; @@ -970,6 +991,9 @@ static inline irqreturn_t mtip_handle_irq(struct driver_data *data) /* don't proceed further */ return IRQ_HANDLED; } + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &dd->dd_flag)) + return rv; mtip_process_errors(dd, port_stat & PORT_IRQ_ERR); } @@ -1040,6 +1064,9 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) msleep(20); continue; /* svc thd is actively issuing commands */ } + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &port->dd->dd_flag)) + return -EFAULT; /* * Ignore s_active bit 0 of array element 0. * This bit will always be set @@ -1161,6 +1188,12 @@ static int mtip_exec_internal_command(struct mtip_port *port, "Internal command did not complete [%d] " "within timeout of %lu ms\n", atomic, timeout); + if (mtip_check_surprise_removal(port->dd->pdev) || + test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &port->dd->dd_flag)) { + rv = -ENXIO; + goto exec_ic_exit; + } rv = -EAGAIN; } @@ -1168,6 +1201,15 @@ static int mtip_exec_internal_command(struct mtip_port *port, & (1 << MTIP_TAG_INTERNAL)) { dev_warn(&port->dd->pdev->dev, "Retiring internal command but CI is 1.\n"); + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &port->dd->dd_flag)) { + hba_reset_nosleep(port->dd); + rv = -ENXIO; + } else { + mtip_restart_port(port); + rv = -EAGAIN; + } + goto exec_ic_exit; } } else { @@ -1177,8 +1219,14 @@ static int mtip_exec_internal_command(struct mtip_port *port, while ((readl( port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) - && time_before(jiffies, timeout)) - ; + && time_before(jiffies, timeout)) { + if (mtip_check_surprise_removal(port->dd->pdev) || + test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &port->dd->dd_flag)) { + rv = -ENXIO; + goto exec_ic_exit; + } + } if (readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) { @@ -1186,9 +1234,17 @@ static int mtip_exec_internal_command(struct mtip_port *port, "Internal command did not complete [%d]\n", atomic); rv = -EAGAIN; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &port->dd->dd_flag)) { + hba_reset_nosleep(port->dd); + rv = -ENXIO; + } else { + mtip_restart_port(port); + rv = -EAGAIN; + } } } - +exec_ic_exit: /* Clear the allocated and active bits for the internal command. */ atomic_set(&int_cmd->active, 0); release_slot(port, MTIP_TAG_INTERNAL); @@ -1242,6 +1298,9 @@ static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer) int rv = 0; struct host_to_dev_fis fis; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + return -EFAULT; + /* Build the FIS. */ memset(&fis, 0, sizeof(struct host_to_dev_fis)); fis.type = 0x27; @@ -1507,9 +1566,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command) fis.device = command[6] & ~0x10; /* Clear the dev bit*/ - dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, " - "nsect %x, sect %x, lcyl %x, " - "hcyl %x, sel %x\n", + dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", __func__, command[0], command[1], @@ -1536,8 +1593,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command) command[4] = reply->cyl_low; command[5] = reply->cyl_hi; - dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, " - "err %x , cyl_lo %x cyl_hi %x\n", + dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", __func__, command[0], command[1], @@ -2082,14 +2138,10 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, struct host_to_dev_fis *fis; struct mtip_port *port = dd->port; struct mtip_cmd *command = &port->commands[tag]; + int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; /* Map the scatter list for DMA access */ - if (dir == READ) - nents = dma_map_sg(&dd->pdev->dev, command->sg, - nents, DMA_FROM_DEVICE); - else - nents = dma_map_sg(&dd->pdev->dev, command->sg, - nents, DMA_TO_DEVICE); + nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir); command->scatter_ents = nents; @@ -2129,7 +2181,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, */ command->comp_data = dd; command->comp_func = mtip_async_complete; - command->direction = (dir == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE); + command->direction = dma_dir; /* * Set the completion function and data for the command passed @@ -2193,6 +2245,10 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd, down(&dd->port->cmd_slot); *tag = get_slot(dd->port); + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) { + up(&dd->port->cmd_slot); + return NULL; + } if (unlikely(*tag < 0)) return NULL; @@ -2209,7 +2265,7 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd, * return value * The size, in bytes, of the data copied into buf. */ -static ssize_t hw_show_registers(struct device *dev, +static ssize_t mtip_hw_show_registers(struct device *dev, struct device_attribute *attr, char *buf) { @@ -2255,7 +2311,7 @@ static ssize_t hw_show_registers(struct device *dev, return size; } -static DEVICE_ATTR(registers, S_IRUGO, hw_show_registers, NULL); +static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL); /* * Create the sysfs related attributes. @@ -2386,10 +2442,12 @@ static int mtip_ftl_rebuild_poll(struct driver_data *dd) "FTL rebuild in progress. Polling for completion.\n"); start = jiffies; - dd->ftlrebuildflag = 1; timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS); do { + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &dd->dd_flag))) + return -EFAULT; if (mtip_check_surprise_removal(dd->pdev)) return -EFAULT; @@ -2410,22 +2468,17 @@ static int mtip_ftl_rebuild_poll(struct driver_data *dd) dev_warn(&dd->pdev->dev, "FTL rebuild complete (%d secs).\n", jiffies_to_msecs(jiffies - start) / 1000); - dd->ftlrebuildflag = 0; mtip_block_initialize(dd); - break; + return 0; } ssleep(10); } while (time_before(jiffies, timeout)); /* Check for timeout */ - if (dd->ftlrebuildflag) { - dev_err(&dd->pdev->dev, + dev_err(&dd->pdev->dev, "Timed out waiting for FTL rebuild to complete (%d secs).\n", jiffies_to_msecs(jiffies - start) / 1000); - return -EFAULT; - } - - return 0; + return -EFAULT; } /* @@ -2456,6 +2509,9 @@ static int mtip_service_thread(void *data) if (kthread_should_stop()) break; + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + &dd->dd_flag))) + break; set_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags); if (test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) { slot = 1; @@ -2515,6 +2571,7 @@ static int mtip_hw_init(struct driver_data *dd) int i; int rv; unsigned int num_command_slots; + unsigned long timeout, timetaken; dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR]; @@ -2625,14 +2682,43 @@ static int mtip_hw_init(struct driver_data *dd) dd->port->mmio + i*0x80 + PORT_SDBV; } - /* Reset the HBA. */ - if (mtip_hba_reset(dd) < 0) { - dev_err(&dd->pdev->dev, - "Card did not reset within timeout\n"); - rv = -EIO; + timetaken = jiffies; + timeout = jiffies + msecs_to_jiffies(30000); + while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) && + time_before(jiffies, timeout)) { + mdelay(100); + } + if (unlikely(mtip_check_surprise_removal(dd->pdev))) { + timetaken = jiffies - timetaken; + dev_warn(&dd->pdev->dev, + "Surprise removal detected at %u ms\n", + jiffies_to_msecs(timetaken)); + rv = -ENODEV; + goto out2 ; + } + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) { + timetaken = jiffies - timetaken; + dev_warn(&dd->pdev->dev, + "Removal detected at %u ms\n", + jiffies_to_msecs(timetaken)); + rv = -EFAULT; goto out2; } + /* Conditionally reset the HBA. */ + if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) { + if (mtip_hba_reset(dd) < 0) { + dev_err(&dd->pdev->dev, + "Card did not reset within timeout\n"); + rv = -EIO; + goto out2; + } + } else { + /* Clear any pending interrupts on the HBA */ + writel(readl(dd->mmio + HOST_IRQ_STAT), + dd->mmio + HOST_IRQ_STAT); + } + mtip_init_port(dd->port); mtip_start_port(dd->port); @@ -2662,6 +2748,12 @@ static int mtip_hw_init(struct driver_data *dd) mod_timer(&dd->port->cmd_timer, jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD)); + + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) { + rv = -EFAULT; + goto out3; + } + if (mtip_get_identify(dd->port, NULL) < 0) { rv = -EFAULT; goto out3; @@ -2714,9 +2806,12 @@ static int mtip_hw_exit(struct driver_data *dd) * Send standby immediate (E0h) to the drive so that it * saves its state. */ - if (atomic_read(&dd->drv_cleanup_done) != true) { + if (!test_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag)) { - mtip_standby_immediate(dd->port); + if (test_bit(MTIP_FLAG_REBUILD_BIT, &dd->dd_flag)) + if (mtip_standby_immediate(dd->port)) + dev_warn(&dd->pdev->dev, + "STANDBY IMMEDIATE failed\n"); /* de-initialize the port. */ mtip_deinit_port(dd->port); @@ -2894,6 +2989,9 @@ static int mtip_block_ioctl(struct block_device *dev, if (!dd) return -ENOTTY; + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) + return -ENOTTY; + switch (cmd) { case BLKFLSBUF: return -ENOTTY; @@ -2929,6 +3027,9 @@ static int mtip_block_compat_ioctl(struct block_device *dev, if (!dd) return -ENOTTY; + if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) + return -ENOTTY; + switch (cmd) { case BLKFLSBUF: return -ENOTTY; @@ -3051,6 +3152,11 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) int nents = 0; int tag = 0; + if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) { + bio_endio(bio, -ENXIO); + return; + } + if (unlikely(!bio_has_data(bio))) { blk_queue_flush(queue, 0); bio_endio(bio, 0); @@ -3063,7 +3169,7 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) if (unlikely((bio)->bi_vcnt > MTIP_MAX_SG)) { dev_warn(&dd->pdev->dev, - "Maximum number of SGL entries exceeded"); + "Maximum number of SGL entries exceeded\n"); bio_io_error(bio); mtip_hw_release_scatterlist(dd, tag); return; @@ -3212,8 +3318,10 @@ skip_create_disk: kobject_put(kobj); } - if (dd->mtip_svc_handler) + if (dd->mtip_svc_handler) { + set_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag); return rv; /* service thread created for handling rebuild */ + } start_service_thread: sprintf(thd_name, "mtip_svc_thd_%02d", index); @@ -3228,6 +3336,9 @@ start_service_thread: goto kthread_run_error; } + if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC) + rv = wait_for_rebuild; + return rv; kthread_run_error: @@ -3274,10 +3385,12 @@ static int mtip_block_remove(struct driver_data *dd) } /* Clean up the sysfs attributes managed by the protocol layer. */ - kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); - if (kobj) { - mtip_hw_sysfs_exit(dd, kobj); - kobject_put(kobj); + if (test_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag)) { + kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); + if (kobj) { + mtip_hw_sysfs_exit(dd, kobj); + kobject_put(kobj); + } } /* @@ -3361,8 +3474,6 @@ static int mtip_pci_probe(struct pci_dev *pdev, return -ENOMEM; } - atomic_set(&dd->resumeflag, false); - /* Attach the private data to this PCI device. */ pci_set_drvdata(pdev, dd); @@ -3419,7 +3530,8 @@ static int mtip_pci_probe(struct pci_dev *pdev, * instance number. */ instance++; - + if (rv != MTIP_FTL_REBUILD_MAGIC) + set_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag); goto done; block_initialize_err: @@ -3433,9 +3545,6 @@ iomap_err: pci_set_drvdata(pdev, NULL); return rv; done: - /* Set the atomic variable as 0 */ - atomic_set(&dd->drv_cleanup_done, false); - return rv; } @@ -3451,8 +3560,10 @@ static void mtip_pci_remove(struct pci_dev *pdev) struct driver_data *dd = pci_get_drvdata(pdev); int counter = 0; + set_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag); + if (mtip_check_surprise_removal(pdev)) { - while (atomic_read(&dd->drv_cleanup_done) == false) { + while (!test_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag)) { counter++; msleep(20); if (counter == 10) { @@ -3490,7 +3601,7 @@ static int mtip_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) return -EFAULT; } - atomic_set(&dd->resumeflag, true); + set_bit(MTIP_DD_FLAG_RESUME_BIT, &dd->dd_flag); /* Disable ports & interrupts then send standby immediate */ rv = mtip_block_suspend(dd); @@ -3556,7 +3667,7 @@ static int mtip_pci_resume(struct pci_dev *pdev) dev_err(&pdev->dev, "Unable to resume\n"); err: - atomic_set(&dd->resumeflag, false); + clear_bit(MTIP_DD_FLAG_RESUME_BIT, &dd->dd_flag); return rv; } diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index e0554a8f223..f4e46cc81d5 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -121,6 +121,12 @@ #define MTIP_FLAG_REBUILD_BIT 5 #define MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT 8 +/* below are bit numbers in 'dd_flag' defined in driver_data */ +#define MTIP_DD_FLAG_REMOVE_PENDING_BIT 1 +#define MTIP_DD_FLAG_RESUME_BIT 2 +#define MTIP_DD_FLAG_CLEANUP_BIT 3 +#define MTIP_DD_FLAG_INIT_DONE_BIT 4 + /* Register Frame Information Structure (FIS), host to device. */ struct host_to_dev_fis { /* @@ -404,13 +410,9 @@ struct driver_data { unsigned slot_groups; /* number of slot groups the product supports */ - atomic_t drv_cleanup_done; /* Atomic variable for SRSI */ - unsigned long index; /* Index to determine the disk name */ - unsigned int ftlrebuildflag; /* FTL rebuild flag */ - - atomic_t resumeflag; /* Atomic variable to track suspend/resume */ + unsigned long dd_flag; /* NOTE: use atomic bit operations on this */ struct task_struct *mtip_svc_handler; /* task_struct of svc thd */ }; -- cgit v1.2.3-70-g09d2 From dad40f16ff683a10f4f2bea55a0b9fd86d3db58e Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:38 +0200 Subject: mtip32xx: make setting comp_time as common Moved setting completion time into mtip_issue_ncq_command() Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 34b395d2d98..aaa82453ae7 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -306,6 +306,10 @@ static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag) port->cmd_issue[MTIP_TAG_INDEX(tag)]); spin_unlock_irqrestore(&port->cmd_issue_lock, flags); + + /* Set the command's timeout value.*/ + port->commands[tag].comp_time = jiffies + msecs_to_jiffies( + MTIP_NCQ_COMMAND_TIMEOUT_MS); } /* @@ -824,10 +828,6 @@ static void mtip_handle_tfe(struct driver_data *dd) set_bit(tag, tagaccum); - /* Update the timeout value. */ - port->commands[tag].comp_time = - jiffies + msecs_to_jiffies( - MTIP_NCQ_COMMAND_TIMEOUT_MS); /* Re-issue the command. */ mtip_issue_ncq_command(port, tag); @@ -2204,9 +2204,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, /* Issue the command to the hardware */ mtip_issue_ncq_command(port, tag); - /* Set the command's timeout value.*/ - port->commands[tag].comp_time = jiffies + msecs_to_jiffies( - MTIP_NCQ_COMMAND_TIMEOUT_MS); + return; } /* @@ -2538,10 +2536,6 @@ static int mtip_service_thread(void *data) /* Issue the command to the hardware */ mtip_issue_ncq_command(port, slot); - /* Set the command's timeout value.*/ - port->commands[slot].comp_time = jiffies + - msecs_to_jiffies(MTIP_NCQ_COMMAND_TIMEOUT_MS); - clear_bit(slot, port->cmds_to_issue); } -- cgit v1.2.3-70-g09d2 From f65872177d838a33e90cbae25625b9bec05134ca Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:38 +0200 Subject: mtip32xx: Add new sysfs entry 'status' * Add support for detecting the following device status - write protect - over temp (thermal shutdown) * Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown * Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman) Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- Documentation/ABI/testing/sysfs-block-rssd | 18 ++ drivers/block/mtip32xx/mtip32xx.c | 323 ++++++++++++++++++++++++++--- drivers/block/mtip32xx/mtip32xx.h | 19 ++ 3 files changed, 331 insertions(+), 29 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-block-rssd (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd new file mode 100644 index 00000000000..d535757799f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -0,0 +1,18 @@ +What: /sys/block/rssd*/registers +Date: March 2012 +KernelVersion: 3.3 +Contact: Asai Thambi S P +Description: This is a read-only file. Dumps below driver information and + hardware registers. + - S ACTive + - Command Issue + - Allocated + - Completed + - PORT IRQ STAT + - HOST IRQ STAT + +What: /sys/block/rssd*/status +Date: April 2012 +KernelVersion: 3.4 +Contact: Asai Thambi S P +Description: This is a read-only file. Indicates the status of the device. diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index aaa82453ae7..79fdb063f9c 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -725,6 +725,10 @@ static void print_tags(struct driver_data *dd, dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count); } +static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, + dma_addr_t buffer_dma, unsigned int sectors); +static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, + struct smart_attr *attrib); /* * Handle an error. * @@ -735,12 +739,15 @@ static void print_tags(struct driver_data *dd, */ static void mtip_handle_tfe(struct driver_data *dd) { - int group, tag, bit, reissue; + int group, tag, bit, reissue, rv; struct mtip_port *port; - struct mtip_cmd *command; + struct mtip_cmd *cmd; u32 completed; struct host_to_dev_fis *fis; unsigned long tagaccum[SLOTBITS_IN_LONGS]; + unsigned char *buf; + char *fail_reason = NULL; + int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0; dev_warn(&dd->pdev->dev, "Taskfile error\n"); @@ -772,13 +779,13 @@ static void mtip_handle_tfe(struct driver_data *dd) if (tag == MTIP_TAG_INTERNAL) continue; - command = &port->commands[tag]; - if (likely(command->comp_func)) { + cmd = &port->commands[tag]; + if (likely(cmd->comp_func)) { set_bit(tag, tagaccum); - atomic_set(&port->commands[tag].active, 0); - command->comp_func(port, + atomic_set(&cmd->active, 0); + cmd->comp_func(port, tag, - command->comp_data, + cmd->comp_data, 0); } else { dev_err(&port->dd->pdev->dev, @@ -798,6 +805,38 @@ static void mtip_handle_tfe(struct driver_data *dd) mdelay(20); mtip_restart_port(port); + /* Trying to determine the cause of the error */ + rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, + dd->port->log_buf, + dd->port->log_buf_dma, 1); + if (rv) { + dev_warn(&dd->pdev->dev, + "Error in READ LOG EXT (10h) command\n"); + /* non-critical error, don't fail the load */ + } else { + buf = (unsigned char *)dd->port->log_buf; + if (buf[259] & 0x1) { + dev_info(&dd->pdev->dev, + "Write protect bit is set.\n"); + set_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag); + fail_all_ncq_write = 1; + fail_reason = "write protect"; + } + if (buf[288] == 0xF7) { + dev_info(&dd->pdev->dev, + "Exceeded Tmax, drive in thermal shutdown.\n"); + set_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag); + fail_all_ncq_cmds = 1; + fail_reason = "thermal shutdown"; + } + if (buf[288] == 0xBF) { + dev_info(&dd->pdev->dev, + "Drive indicates rebuild has failed.\n"); + fail_all_ncq_cmds = 1; + fail_reason = "rebuild failed"; + } + } + /* clear the tag accumulator */ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); @@ -806,25 +845,44 @@ static void mtip_handle_tfe(struct driver_data *dd) for (bit = 0; bit < 32; bit++) { reissue = 1; tag = (group << 5) + bit; + cmd = &port->commands[tag]; /* If the active bit is set re-issue the command */ - if (atomic_read(&port->commands[tag].active) == 0) + if (atomic_read(&cmd->active) == 0) continue; - fis = (struct host_to_dev_fis *) - port->commands[tag].command; + fis = (struct host_to_dev_fis *)cmd->command; /* Should re-issue? */ if (tag == MTIP_TAG_INTERNAL || fis->command == ATA_CMD_SET_FEATURES) reissue = 0; + else { + if (fail_all_ncq_cmds || + (fail_all_ncq_write && + fis->command == ATA_CMD_FPDMA_WRITE)) { + dev_warn(&dd->pdev->dev, + " Fail: %s w/tag %d [%s].\n", + fis->command == ATA_CMD_FPDMA_WRITE ? + "write" : "read", + tag, + fail_reason != NULL ? + fail_reason : "unknown"); + atomic_set(&cmd->active, 0); + if (cmd->comp_func) { + cmd->comp_func(port, tag, + cmd->comp_data, + -ENODATA); + } + continue; + } + } /* * First check if this command has * exceeded its retries. */ - if (reissue && - (port->commands[tag].retries-- > 0)) { + if (reissue && (cmd->retries-- > 0)) { set_bit(tag, tagaccum); @@ -837,13 +895,13 @@ static void mtip_handle_tfe(struct driver_data *dd) /* Retire a command that will not be reissued */ dev_warn(&port->dd->pdev->dev, "retiring tag %d\n", tag); - atomic_set(&port->commands[tag].active, 0); + atomic_set(&cmd->active, 0); - if (port->commands[tag].comp_func) - port->commands[tag].comp_func( + if (cmd->comp_func) + cmd->comp_func( port, tag, - port->commands[tag].comp_data, + cmd->comp_data, PORT_IRQ_TF_ERR); else dev_warn(&port->dd->pdev->dev, @@ -1374,6 +1432,7 @@ static int mtip_standby_immediate(struct mtip_port *port) { int rv; struct host_to_dev_fis fis; + unsigned long start; /* Build the FIS. */ memset(&fis, 0, sizeof(struct host_to_dev_fis)); @@ -1381,15 +1440,150 @@ static int mtip_standby_immediate(struct mtip_port *port) fis.opts = 1 << 7; fis.command = ATA_CMD_STANDBYNOW1; - /* Execute the command. Use a 15-second timeout for large drives. */ + start = jiffies; rv = mtip_exec_internal_command(port, &fis, 5, 0, 0, 0, - GFP_KERNEL, + GFP_ATOMIC, 15000); + dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n", + jiffies_to_msecs(jiffies - start)); + if (rv) + dev_warn(&port->dd->pdev->dev, + "STANDBY IMMEDIATE command failed.\n"); + + return rv; +} + +/* + * Issue a READ LOG EXT command to the device. + * + * @port pointer to the port structure. + * @page page number to fetch + * @buffer pointer to buffer + * @buffer_dma dma address corresponding to @buffer + * @sectors page length to fetch, in sectors + * + * return value + * @rv return value from mtip_exec_internal_command() + */ +static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, + dma_addr_t buffer_dma, unsigned int sectors) +{ + struct host_to_dev_fis fis; + + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_READ_LOG_EXT; + fis.sect_count = sectors & 0xFF; + fis.sect_cnt_ex = (sectors >> 8) & 0xFF; + fis.lba_low = page; + fis.lba_mid = 0; + fis.device = ATA_DEVICE_OBS; + + memset(buffer, 0, sectors * ATA_SECT_SIZE); + + return mtip_exec_internal_command(port, + &fis, + 5, + buffer_dma, + sectors * ATA_SECT_SIZE, + 0, + GFP_ATOMIC, + MTIP_INTERNAL_COMMAND_TIMEOUT_MS); +} + +/* + * Issue a SMART READ DATA command to the device. + * + * @port pointer to the port structure. + * @buffer pointer to buffer + * @buffer_dma dma address corresponding to @buffer + * + * return value + * @rv return value from mtip_exec_internal_command() + */ +static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer, + dma_addr_t buffer_dma) +{ + struct host_to_dev_fis fis; + + memset(&fis, 0, sizeof(struct host_to_dev_fis)); + fis.type = 0x27; + fis.opts = 1 << 7; + fis.command = ATA_CMD_SMART; + fis.features = 0xD0; + fis.sect_count = 1; + fis.lba_mid = 0x4F; + fis.lba_hi = 0xC2; + fis.device = ATA_DEVICE_OBS; + + return mtip_exec_internal_command(port, + &fis, + 5, + buffer_dma, + ATA_SECT_SIZE, + 0, + GFP_ATOMIC, + 15000); +} + +/* + * Get the value of a smart attribute + * + * @port pointer to the port structure + * @id attribute number + * @attrib pointer to return attrib information corresponding to @id + * + * return value + * -EINVAL NULL buffer passed or unsupported attribute @id. + * -EPERM Identify data not valid, SMART not supported or not enabled + */ +static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, + struct smart_attr *attrib) +{ + int rv, i; + struct smart_attr *pattr; + + if (!attrib) + return -EINVAL; + + if (!port->identify_valid) { + dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n"); + return -EPERM; + } + if (!(port->identify[82] & 0x1)) { + dev_warn(&port->dd->pdev->dev, "SMART not supported\n"); + return -EPERM; + } + if (!(port->identify[85] & 0x1)) { + dev_warn(&port->dd->pdev->dev, "SMART not enabled\n"); + return -EPERM; + } + + memset(port->smart_buf, 0, ATA_SECT_SIZE); + rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma); + if (rv) { + dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n"); + return rv; + } + + pattr = (struct smart_attr *)(port->smart_buf + 2); + for (i = 0; i < 29; i++, pattr++) + if (pattr->attr_id == id) { + memcpy(attrib, pattr, sizeof(struct smart_attr)); + break; + } + + if (i == 29) { + dev_warn(&port->dd->pdev->dev, + "Query for invalid SMART attribute ID\n"); + rv = -EINVAL; + } return rv; } @@ -2272,7 +2466,7 @@ static ssize_t mtip_hw_show_registers(struct device *dev, int size = 0; int n; - size += sprintf(&buf[size], "%s:\ns_active:\n", __func__); + size += sprintf(&buf[size], "S ACTive:\n"); for (n = 0; n < dd->slot_groups; n++) size += sprintf(&buf[size], "0x%08x\n", @@ -2296,20 +2490,39 @@ static ssize_t mtip_hw_show_registers(struct device *dev, group_allocated); } - size += sprintf(&buf[size], "completed:\n"); + size += sprintf(&buf[size], "Completed:\n"); for (n = 0; n < dd->slot_groups; n++) size += sprintf(&buf[size], "0x%08x\n", readl(dd->port->completed[n])); - size += sprintf(&buf[size], "PORT_IRQ_STAT 0x%08x\n", + size += sprintf(&buf[size], "PORT IRQ STAT : 0x%08x\n", readl(dd->port->mmio + PORT_IRQ_STAT)); - size += sprintf(&buf[size], "HOST_IRQ_STAT 0x%08x\n", + size += sprintf(&buf[size], "HOST IRQ STAT : 0x%08x\n", readl(dd->mmio + HOST_IRQ_STAT)); return size; } + +static ssize_t mtip_hw_show_status(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct driver_data *dd = dev_to_disk(dev)->private_data; + int size = 0; + + if (test_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag)) + size += sprintf(buf, "%s", "thermal_shutdown\n"); + else if (test_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag)) + size += sprintf(buf, "%s", "write_protect\n"); + else + size += sprintf(buf, "%s", "online\n"); + + return size; +} + static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL); +static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL); /* * Create the sysfs related attributes. @@ -2328,7 +2541,10 @@ static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj) if (sysfs_create_file(kobj, &dev_attr_registers.attr)) dev_warn(&dd->pdev->dev, - "Error creating registers sysfs entry\n"); + "Error creating 'registers' sysfs entry\n"); + if (sysfs_create_file(kobj, &dev_attr_status.attr)) + dev_warn(&dd->pdev->dev, + "Error creating 'status' sysfs entry\n"); return 0; } @@ -2348,6 +2564,7 @@ static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj) return -EINVAL; sysfs_remove_file(kobj, &dev_attr_registers.attr); + sysfs_remove_file(kobj, &dev_attr_status.attr); return 0; } @@ -2566,6 +2783,8 @@ static int mtip_hw_init(struct driver_data *dd) int rv; unsigned int num_command_slots; unsigned long timeout, timetaken; + unsigned char *buf; + struct smart_attr attr242; dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR]; @@ -2600,7 +2819,7 @@ static int mtip_hw_init(struct driver_data *dd) /* Allocate memory for the command list. */ dd->port->command_list = dmam_alloc_coherent(&dd->pdev->dev, - HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2), + HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4), &dd->port->command_list_dma, GFP_KERNEL); if (!dd->port->command_list) { @@ -2613,7 +2832,7 @@ static int mtip_hw_init(struct driver_data *dd) /* Clear the memory we have allocated. */ memset(dd->port->command_list, 0, - HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2)); + HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4)); /* Setup the addresse of the RX FIS. */ dd->port->rxfis = dd->port->command_list + HW_CMD_SLOT_SZ; @@ -2629,10 +2848,19 @@ static int mtip_hw_init(struct driver_data *dd) dd->port->identify_dma = dd->port->command_tbl_dma + HW_CMD_TBL_AR_SZ; - /* Setup the address of the sector buffer. */ + /* Setup the address of the sector buffer - for some non-ncq cmds */ dd->port->sector_buffer = (void *) dd->port->identify + ATA_SECT_SIZE; dd->port->sector_buffer_dma = dd->port->identify_dma + ATA_SECT_SIZE; + /* Setup the address of the log buf - for read log command */ + dd->port->log_buf = (void *)dd->port->sector_buffer + ATA_SECT_SIZE; + dd->port->log_buf_dma = dd->port->sector_buffer_dma + ATA_SECT_SIZE; + + /* Setup the address of the smart buf - for smart read data command */ + dd->port->smart_buf = (void *)dd->port->log_buf + ATA_SECT_SIZE; + dd->port->smart_buf_dma = dd->port->log_buf_dma + ATA_SECT_SIZE; + + /* Point the command headers at the command tables. */ for (i = 0; i < num_command_slots; i++) { dd->port->commands[i].command_header = @@ -2759,6 +2987,43 @@ static int mtip_hw_init(struct driver_data *dd) return MTIP_FTL_REBUILD_MAGIC; } mtip_dump_identify(dd->port); + + /* check write protect, over temp and rebuild statuses */ + rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ, + dd->port->log_buf, + dd->port->log_buf_dma, 1); + if (rv) { + dev_warn(&dd->pdev->dev, + "Error in READ LOG EXT (10h) command\n"); + /* non-critical error, don't fail the load */ + } else { + buf = (unsigned char *)dd->port->log_buf; + if (buf[259] & 0x1) { + dev_info(&dd->pdev->dev, + "Write protect bit is set.\n"); + set_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag); + } + if (buf[288] == 0xF7) { + dev_info(&dd->pdev->dev, + "Exceeded Tmax, drive in thermal shutdown.\n"); + set_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag); + } + if (buf[288] == 0xBF) { + dev_info(&dd->pdev->dev, + "Drive indicates rebuild has failed.\n"); + /* TODO */ + } + } + + /* get write protect progess */ + memset(&attr242, 0, sizeof(struct smart_attr)); + if (mtip_get_smart_attr(dd->port, 242, &attr242)) + dev_warn(&dd->pdev->dev, + "Unable to check write protect progress\n"); + else + dev_info(&dd->pdev->dev, + "Write protect progress: %d%% (%d blocks)\n", + attr242.cur, attr242.data); return rv; out3: @@ -2776,7 +3041,7 @@ out2: /* Free the command/command header memory. */ dmam_free_coherent(&dd->pdev->dev, - HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2), + HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4), dd->port->command_list, dd->port->command_list_dma); out1: @@ -2825,7 +3090,7 @@ static int mtip_hw_exit(struct driver_data *dd) /* Free the command/command header memory. */ dmam_free_coherent(&dd->pdev->dev, - HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2), + HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4), dd->port->command_list, dd->port->command_list_dma); /* Free the memory allocated for the for structure. */ @@ -3378,7 +3643,7 @@ static int mtip_block_remove(struct driver_data *dd) kthread_stop(dd->mtip_svc_handler); } - /* Clean up the sysfs attributes managed by the protocol layer. */ + /* Clean up the sysfs attributes, if created */ if (test_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag)) { kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); if (kobj) { diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index f4e46cc81d5..ea5c7e7cb50 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -127,6 +127,19 @@ #define MTIP_DD_FLAG_CLEANUP_BIT 3 #define MTIP_DD_FLAG_INIT_DONE_BIT 4 +#define MTIP_DD_FLAG_WRITE_PROTECT_BIT 5 +#define MTIP_DD_FLAG_OVER_TEMP_BIT 6 +#define MTIP_DD_FLAG_REBUILD_FAILED_BIT 7 + +__packed struct smart_attr{ + u8 attr_id; + u16 flags; + u8 cur; + u8 worst; + u32 data; + u8 res[3]; +}; + /* Register Frame Information Structure (FIS), host to device. */ struct host_to_dev_fis { /* @@ -351,6 +364,12 @@ struct mtip_port { * when the command slot and all associated data structures * are no longer needed. */ + u16 *log_buf; + dma_addr_t log_buf_dma; + + u8 *smart_buf; + dma_addr_t smart_buf_dma; + unsigned long allocated[SLOTBITS_IN_LONGS]; /* * used to queue commands when an internal command is in progress -- cgit v1.2.3-70-g09d2 From 8182b495281764ca518781e876c91900e75088d2 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:38 +0200 Subject: mtip32xx: misc changes * Handle the interrupt completion of polled internal commands * Do not check remove pending flag for standby command * On rebuild failure, - set corresponding bit dd_flag - do not send standby command * Free ida index in remove path Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 66 ++++++++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 79fdb063f9c..be96626acce 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -708,6 +708,14 @@ static void mtip_completion(struct mtip_port *port, complete(waiting); } +static void mtip_null_completion(struct mtip_port *port, + int tag, + void *data, + int status) +{ + return; +} + /* * Helper function for tag logging */ @@ -992,8 +1000,6 @@ static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat) } } - dev_warn(&dd->pdev->dev, "IRQ status 0x%x ignored.\n", port_stat); - return; } @@ -1161,7 +1167,7 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) * -EAGAIN Time out waiting for command to complete. */ static int mtip_exec_internal_command(struct mtip_port *port, - void *fis, + struct host_to_dev_fis *fis, int fis_len, dma_addr_t buffer, int buf_len, @@ -1190,14 +1196,17 @@ static int mtip_exec_internal_command(struct mtip_port *port, set_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags); if (atomic == GFP_KERNEL) { - /* wait for io to complete if non atomic */ - if (mtip_quiesce_io(port, 5000) < 0) { - dev_warn(&port->dd->pdev->dev, - "Failed to quiesce IO\n"); - release_slot(port, MTIP_TAG_INTERNAL); - clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags); - wake_up_interruptible(&port->svc_wait); - return -EBUSY; + if (fis->command != ATA_CMD_STANDBYNOW1) { + /* wait for io to complete if non atomic */ + if (mtip_quiesce_io(port, 5000) < 0) { + dev_warn(&port->dd->pdev->dev, + "Failed to quiesce IO\n"); + release_slot(port, MTIP_TAG_INTERNAL); + clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, + &port->flags); + wake_up_interruptible(&port->svc_wait); + return -EBUSY; + } } /* Set the completion function and data for the command. */ @@ -1207,7 +1216,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, } else { /* Clear completion - we're going to poll */ int_cmd->comp_data = NULL; - int_cmd->comp_func = NULL; + int_cmd->comp_func = mtip_null_completion; } /* Copy the command to the command table */ @@ -1273,12 +1282,14 @@ static int mtip_exec_internal_command(struct mtip_port *port, } else { /* Spin for checking if command still outstanding */ timeout = jiffies + msecs_to_jiffies(timeout); - - while ((readl( - port->cmd_issue[MTIP_TAG_INTERNAL]) - & (1 << MTIP_TAG_INTERNAL)) - && time_before(jiffies, timeout)) { - if (mtip_check_surprise_removal(port->dd->pdev) || + while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL]) + & (1 << MTIP_TAG_INTERNAL)) + && time_before(jiffies, timeout)) { + if (mtip_check_surprise_removal(port->dd->pdev)) { + rv = -ENXIO; + goto exec_ic_exit; + } + if ((fis->command != ATA_CMD_STANDBYNOW1) && test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { rv = -ENXIO; @@ -1289,8 +1300,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, if (readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL)) { dev_err(&port->dd->pdev->dev, - "Internal command did not complete [%d]\n", - atomic); + "Internal command did not complete [atomic]\n"); rv = -EAGAIN; if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { @@ -2758,7 +2768,9 @@ static int mtip_service_thread(void *data) clear_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags); } else if (test_bit(MTIP_FLAG_REBUILD_BIT, &port->flags)) { - mtip_ftl_rebuild_poll(dd); + if (!mtip_ftl_rebuild_poll(dd)) + set_bit(MTIP_DD_FLAG_REBUILD_FAILED_BIT, + &dd->dd_flag); clear_bit(MTIP_FLAG_REBUILD_BIT, &port->flags); } clear_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags); @@ -3067,7 +3079,7 @@ static int mtip_hw_exit(struct driver_data *dd) */ if (!test_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag)) { - if (test_bit(MTIP_FLAG_REBUILD_BIT, &dd->dd_flag)) + if (!test_bit(MTIP_FLAG_REBUILD_BIT, &dd->port->flags)) if (mtip_standby_immediate(dd->port)) dev_warn(&dd->pdev->dev, "STANDBY IMMEDIATE failed\n"); @@ -3657,6 +3669,11 @@ static int mtip_block_remove(struct driver_data *dd) * from /dev */ del_gendisk(dd->disk); + + spin_lock(&rssd_index_lock); + ida_remove(&rssd_index_ida, dd->index); + spin_unlock(&rssd_index_lock); + blk_cleanup_queue(dd->queue); dd->disk = NULL; dd->queue = NULL; @@ -3686,6 +3703,11 @@ static int mtip_block_shutdown(struct driver_data *dd) /* Delete our gendisk structure, and cleanup the blk queue. */ del_gendisk(dd->disk); + + spin_lock(&rssd_index_lock); + ida_remove(&rssd_index_ida, dd->index); + spin_unlock(&rssd_index_lock); + blk_cleanup_queue(dd->queue); dd->disk = NULL; dd->queue = NULL; -- cgit v1.2.3-70-g09d2 From 8a857a880bd83ba4f217d55dd4a623a7e4b5cb47 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:38 +0200 Subject: mtip32xx: Shorten macro names Shortened macros used to represent mtip_port->flags and dd->dd_flag Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 124 +++++++++++++++++++------------------- drivers/block/mtip32xx/mtip32xx.h | 28 ++++----- 2 files changed, 75 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index be96626acce..e57864a7912 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -173,7 +173,7 @@ static void mtip_command_cleanup(struct driver_data *dd) up(&port->cmd_slot); - set_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag); in_progress = 0; } @@ -271,7 +271,7 @@ static int hba_reset_nosleep(struct driver_data *dd) && time_before(jiffies, timeout)) mdelay(1); - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) return -1; if (readl(dd->mmio + HOST_CTL) & HOST_RESET) @@ -467,7 +467,7 @@ static void mtip_restart_port(struct mtip_port *port) && time_before(jiffies, timeout)) ; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) return; /* @@ -498,7 +498,7 @@ static void mtip_restart_port(struct mtip_port *port) while (time_before(jiffies, timeout)) ; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) return; /* Clear PxSCTL.DET */ @@ -512,7 +512,7 @@ static void mtip_restart_port(struct mtip_port *port) && time_before(jiffies, timeout)) ; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) return; if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0) @@ -545,7 +545,7 @@ static void mtip_timeout_function(unsigned long int data) if (unlikely(!port)) return; - if (test_bit(MTIP_DD_FLAG_RESUME_BIT, &port->dd->dd_flag)) { + if (test_bit(MTIP_DDF_RESUME_BIT, &port->dd->dd_flag)) { mod_timer(&port->cmd_timer, jiffies + msecs_to_jiffies(30000)); return; @@ -572,7 +572,7 @@ static void mtip_timeout_function(unsigned long int data) cmdto_cnt++; if (cmdto_cnt == 1) - set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags); + set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); /* * Clear the completed bit. This should prevent @@ -610,7 +610,7 @@ static void mtip_timeout_function(unsigned long int data) "%d commands timed out: restarting port", cmdto_cnt); mtip_restart_port(port); - clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); } @@ -765,7 +765,7 @@ static void mtip_handle_tfe(struct driver_data *dd) del_timer(&port->cmd_timer); /* Set eh_active */ - set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags); + set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); /* Loop through all the groups */ for (group = 0; group < dd->slot_groups; group++) { @@ -826,14 +826,14 @@ static void mtip_handle_tfe(struct driver_data *dd) if (buf[259] & 0x1) { dev_info(&dd->pdev->dev, "Write protect bit is set.\n"); - set_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); fail_all_ncq_write = 1; fail_reason = "write protect"; } if (buf[288] == 0xF7) { dev_info(&dd->pdev->dev, "Exceeded Tmax, drive in thermal shutdown.\n"); - set_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); fail_all_ncq_cmds = 1; fail_reason = "thermal shutdown"; } @@ -920,7 +920,7 @@ static void mtip_handle_tfe(struct driver_data *dd) print_tags(dd, "TFE tags reissued:", tagaccum); /* clear eh_active */ - clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); mod_timer(&port->cmd_timer, @@ -988,7 +988,7 @@ static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat) struct mtip_port *port = dd->port; struct mtip_cmd *cmd = &port->commands[MTIP_TAG_INTERNAL]; - if (test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) && + if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && (cmd != NULL) && !(readl(port->cmd_issue[MTIP_TAG_INTERNAL]) & (1 << MTIP_TAG_INTERNAL))) { if (cmd->comp_func) { @@ -1055,7 +1055,7 @@ static inline irqreturn_t mtip_handle_irq(struct driver_data *data) /* don't proceed further */ return IRQ_HANDLED; } - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) return rv; @@ -1123,13 +1123,12 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout) to = jiffies + msecs_to_jiffies(timeout); do { - if (test_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags) && - test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) { + if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) && + test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { msleep(20); continue; /* svc thd is actively issuing commands */ } - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, - &port->dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) return -EFAULT; /* * Ignore s_active bit 0 of array element 0. @@ -1193,7 +1192,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, "Internal command already active\n"); return -EBUSY; } - set_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags); + set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); if (atomic == GFP_KERNEL) { if (fis->command != ATA_CMD_STANDBYNOW1) { @@ -1202,8 +1201,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, dev_warn(&port->dd->pdev->dev, "Failed to quiesce IO\n"); release_slot(port, MTIP_TAG_INTERNAL); - clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, - &port->flags); + clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); return -EBUSY; } @@ -1256,7 +1254,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, "within timeout of %lu ms\n", atomic, timeout); if (mtip_check_surprise_removal(port->dd->pdev) || - test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { rv = -ENXIO; goto exec_ic_exit; @@ -1268,7 +1266,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, & (1 << MTIP_TAG_INTERNAL)) { dev_warn(&port->dd->pdev->dev, "Retiring internal command but CI is 1.\n"); - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { hba_reset_nosleep(port->dd); rv = -ENXIO; @@ -1290,7 +1288,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, goto exec_ic_exit; } if ((fis->command != ATA_CMD_STANDBYNOW1) && - test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { rv = -ENXIO; goto exec_ic_exit; @@ -1302,7 +1300,7 @@ static int mtip_exec_internal_command(struct mtip_port *port, dev_err(&port->dd->pdev->dev, "Internal command did not complete [atomic]\n"); rv = -EAGAIN; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) { hba_reset_nosleep(port->dd); rv = -ENXIO; @@ -1316,7 +1314,7 @@ exec_ic_exit: /* Clear the allocated and active bits for the internal command. */ atomic_set(&int_cmd->active, 0); release_slot(port, MTIP_TAG_INTERNAL); - clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); return rv; @@ -1366,7 +1364,7 @@ static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer) int rv = 0; struct host_to_dev_fis fis; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &port->dd->dd_flag)) + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag)) return -EFAULT; /* Build the FIS. */ @@ -2398,10 +2396,10 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, * To prevent this command from being issued * if an internal command is in progress or error handling is active. */ - if (unlikely(test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) || - test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags))) { + if (unlikely(test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) || + test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags))) { set_bit(tag, port->cmds_to_issue); - set_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags); + set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); return; } @@ -2447,7 +2445,7 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd, down(&dd->port->cmd_slot); *tag = get_slot(dd->port); - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) { + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) { up(&dd->port->cmd_slot); return NULL; } @@ -2521,9 +2519,9 @@ static ssize_t mtip_hw_show_status(struct device *dev, struct driver_data *dd = dev_to_disk(dev)->private_data; int size = 0; - if (test_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag)) + if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag)) size += sprintf(buf, "%s", "thermal_shutdown\n"); - else if (test_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag)) + else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag)) size += sprintf(buf, "%s", "write_protect\n"); else size += sprintf(buf, "%s", "online\n"); @@ -2670,7 +2668,7 @@ static int mtip_ftl_rebuild_poll(struct driver_data *dd) timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS); do { - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) return -EFAULT; if (mtip_check_surprise_removal(dd->pdev)) @@ -2728,17 +2726,17 @@ static int mtip_service_thread(void *data) * is in progress nor error handling is active */ wait_event_interruptible(port->svc_wait, (port->flags) && - !test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) && - !test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags)); + !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && + !test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)); if (kthread_should_stop()) break; - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) break; - set_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags); - if (test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) { + set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); + if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { slot = 1; /* used to restrict the loop to one iteration */ slot_start = num_cmd_slots; @@ -2766,16 +2764,16 @@ static int mtip_service_thread(void *data) clear_bit(slot, port->cmds_to_issue); } - clear_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags); - } else if (test_bit(MTIP_FLAG_REBUILD_BIT, &port->flags)) { + clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); + } else if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) { if (!mtip_ftl_rebuild_poll(dd)) - set_bit(MTIP_DD_FLAG_REBUILD_FAILED_BIT, + set_bit(MTIP_DDF_REBUILD_FAILED_BIT, &dd->dd_flag); - clear_bit(MTIP_FLAG_REBUILD_BIT, &port->flags); + clear_bit(MTIP_PF_REBUILD_BIT, &port->flags); } - clear_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); - if (test_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &port->flags)) + if (test_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &port->flags)) break; } return 0; @@ -2930,7 +2928,7 @@ static int mtip_hw_init(struct driver_data *dd) rv = -ENODEV; goto out2 ; } - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) { + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) { timetaken = jiffies - timetaken; dev_warn(&dd->pdev->dev, "Removal detected at %u ms\n", @@ -2983,7 +2981,7 @@ static int mtip_hw_init(struct driver_data *dd) jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD)); - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) { + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { rv = -EFAULT; goto out3; } @@ -2995,7 +2993,7 @@ static int mtip_hw_init(struct driver_data *dd) if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) == MTIP_FTL_REBUILD_MAGIC) { - set_bit(MTIP_FLAG_REBUILD_BIT, &dd->port->flags); + set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags); return MTIP_FTL_REBUILD_MAGIC; } mtip_dump_identify(dd->port); @@ -3013,12 +3011,12 @@ static int mtip_hw_init(struct driver_data *dd) if (buf[259] & 0x1) { dev_info(&dd->pdev->dev, "Write protect bit is set.\n"); - set_bit(MTIP_DD_FLAG_WRITE_PROTECT_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag); } if (buf[288] == 0xF7) { dev_info(&dd->pdev->dev, "Exceeded Tmax, drive in thermal shutdown.\n"); - set_bit(MTIP_DD_FLAG_OVER_TEMP_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag); } if (buf[288] == 0xBF) { dev_info(&dd->pdev->dev, @@ -3077,9 +3075,9 @@ static int mtip_hw_exit(struct driver_data *dd) * Send standby immediate (E0h) to the drive so that it * saves its state. */ - if (!test_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag)) { + if (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) { - if (!test_bit(MTIP_FLAG_REBUILD_BIT, &dd->port->flags)) + if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags)) if (mtip_standby_immediate(dd->port)) dev_warn(&dd->pdev->dev, "STANDBY IMMEDIATE failed\n"); @@ -3260,7 +3258,7 @@ static int mtip_block_ioctl(struct block_device *dev, if (!dd) return -ENOTTY; - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) return -ENOTTY; switch (cmd) { @@ -3298,7 +3296,7 @@ static int mtip_block_compat_ioctl(struct block_device *dev, if (!dd) return -ENOTTY; - if (unlikely(test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag))) + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) return -ENOTTY; switch (cmd) { @@ -3423,7 +3421,7 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) int nents = 0; int tag = 0; - if (test_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag)) { + if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { bio_endio(bio, -ENXIO); return; } @@ -3590,7 +3588,7 @@ skip_create_disk: } if (dd->mtip_svc_handler) { - set_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); return rv; /* service thread created for handling rebuild */ } @@ -3650,13 +3648,13 @@ static int mtip_block_remove(struct driver_data *dd) struct kobject *kobj; if (dd->mtip_svc_handler) { - set_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags); + set_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags); wake_up_interruptible(&dd->port->svc_wait); kthread_stop(dd->mtip_svc_handler); } /* Clean up the sysfs attributes, if created */ - if (test_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag)) { + if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) { kobj = kobject_get(&disk_to_dev(dd->disk)->kobj); if (kobj) { mtip_hw_sysfs_exit(dd, kobj); @@ -3812,7 +3810,7 @@ static int mtip_pci_probe(struct pci_dev *pdev, */ instance++; if (rv != MTIP_FTL_REBUILD_MAGIC) - set_bit(MTIP_DD_FLAG_INIT_DONE_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag); goto done; block_initialize_err: @@ -3841,10 +3839,10 @@ static void mtip_pci_remove(struct pci_dev *pdev) struct driver_data *dd = pci_get_drvdata(pdev); int counter = 0; - set_bit(MTIP_DD_FLAG_REMOVE_PENDING_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag); if (mtip_check_surprise_removal(pdev)) { - while (!test_bit(MTIP_DD_FLAG_CLEANUP_BIT, &dd->dd_flag)) { + while (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) { counter++; msleep(20); if (counter == 10) { @@ -3882,7 +3880,7 @@ static int mtip_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) return -EFAULT; } - set_bit(MTIP_DD_FLAG_RESUME_BIT, &dd->dd_flag); + set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); /* Disable ports & interrupts then send standby immediate */ rv = mtip_block_suspend(dd); @@ -3948,7 +3946,7 @@ static int mtip_pci_resume(struct pci_dev *pdev) dev_err(&pdev->dev, "Unable to resume\n"); err: - clear_bit(MTIP_DD_FLAG_RESUME_BIT, &dd->dd_flag); + clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag); return rv; } diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index ea5c7e7cb50..5ad2d79f7c4 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -114,22 +114,22 @@ #define __force_bit2int (unsigned int __force) /* below are bit numbers in 'flags' defined in mtip_port */ -#define MTIP_FLAG_IC_ACTIVE_BIT 0 -#define MTIP_FLAG_EH_ACTIVE_BIT 1 -#define MTIP_FLAG_SVC_THD_ACTIVE_BIT 2 -#define MTIP_FLAG_ISSUE_CMDS_BIT 4 -#define MTIP_FLAG_REBUILD_BIT 5 -#define MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT 8 +#define MTIP_PF_IC_ACTIVE_BIT 0 +#define MTIP_PF_EH_ACTIVE_BIT 1 +#define MTIP_PF_SVC_THD_ACTIVE_BIT 2 +#define MTIP_PF_ISSUE_CMDS_BIT 4 +#define MTIP_PF_REBUILD_BIT 5 +#define MTIP_PF_SVC_THD_SHOULD_STOP_BIT 8 /* below are bit numbers in 'dd_flag' defined in driver_data */ -#define MTIP_DD_FLAG_REMOVE_PENDING_BIT 1 -#define MTIP_DD_FLAG_RESUME_BIT 2 -#define MTIP_DD_FLAG_CLEANUP_BIT 3 -#define MTIP_DD_FLAG_INIT_DONE_BIT 4 - -#define MTIP_DD_FLAG_WRITE_PROTECT_BIT 5 -#define MTIP_DD_FLAG_OVER_TEMP_BIT 6 -#define MTIP_DD_FLAG_REBUILD_FAILED_BIT 7 +#define MTIP_DDF_REMOVE_PENDING_BIT 1 +#define MTIP_DDF_RESUME_BIT 2 +#define MTIP_DDF_CLEANUP_BIT 3 +#define MTIP_DDF_INIT_DONE_BIT 4 + +#define MTIP_DDF_WRITE_PROTECT_BIT 5 +#define MTIP_DDF_OVER_TEMP_BIT 6 +#define MTIP_DDF_REBUILD_FAILED_BIT 7 __packed struct smart_attr{ u8 attr_id; -- cgit v1.2.3-70-g09d2 From c74b0f586fa3cbc92ca451836fd75ae7a3fa85ac Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:39 +0200 Subject: mtip32xx: fix handling of commands in various scenarios * If a ncq command time out and a non-ncq command is active, skip restart port * Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode * When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back * Changed timeout for download microcode and smart commands * If the device in write protect mode, fail all writes (do not send to device) * Set maximum retries to 2 Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 144 ++++++++++++++++++++++++++++---------- drivers/block/mtip32xx/mtip32xx.h | 39 +++++++---- 2 files changed, 132 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index e57864a7912..47404ef5749 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -436,7 +436,8 @@ static void mtip_init_port(struct mtip_port *port) writel(0xFFFFFFFF, port->completed[i]); /* Clear any pending interrupts for this port */ - writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT); + writel(readl(port->dd->mmio + PORT_IRQ_STAT), + port->dd->mmio + PORT_IRQ_STAT); /* Clear any pending interrupts on the HBA. */ writel(readl(port->dd->mmio + HOST_IRQ_STAT), @@ -541,6 +542,7 @@ static void mtip_timeout_function(unsigned long int data) int tag, cmdto_cnt = 0; unsigned int bit, group; unsigned int num_command_slots = port->dd->slot_groups * 32; + unsigned long to; if (unlikely(!port)) return; @@ -605,7 +607,7 @@ static void mtip_timeout_function(unsigned long int data) } } - if (cmdto_cnt) { + if (cmdto_cnt && !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { dev_warn(&port->dd->pdev->dev, "%d commands timed out: restarting port", cmdto_cnt); @@ -614,6 +616,21 @@ static void mtip_timeout_function(unsigned long int data) wake_up_interruptible(&port->svc_wait); } + if (port->ic_pause_timer) { + to = port->ic_pause_timer + msecs_to_jiffies(1000); + if (time_after(jiffies, to)) { + if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { + port->ic_pause_timer = 0; + clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); + wake_up_interruptible(&port->svc_wait); + } + + + } + } + /* Restart the timer */ mod_timer(&port->cmd_timer, jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD)); @@ -1105,6 +1122,39 @@ static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag) port->cmd_issue[MTIP_TAG_INDEX(tag)]); } +static bool mtip_pause_ncq(struct mtip_port *port, + struct host_to_dev_fis *fis) +{ + struct host_to_dev_fis *reply; + unsigned long task_file_data; + + reply = port->rxfis + RX_FIS_D2H_REG; + task_file_data = readl(port->mmio+PORT_TFDATA); + + if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT)) + return false; + + if (fis->command == ATA_CMD_SEC_ERASE_PREP) { + set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + port->ic_pause_timer = jiffies; + return true; + } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && + (fis->features == 0x03)) { + set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); + port->ic_pause_timer = jiffies; + return true; + } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) || + ((fis->command == 0xFC) && + (fis->features == 0x27 || fis->features == 0x72 || + fis->features == 0x62 || fis->features == 0x26))) { + /* Com reset after secure erase or lowlevel format */ + mtip_restart_port(port); + return false; + } + + return false; +} + /* * Wait for port to quiesce * @@ -1176,8 +1226,9 @@ static int mtip_exec_internal_command(struct mtip_port *port, { struct mtip_cmd_sg *command_sg; DECLARE_COMPLETION_ONSTACK(wait); - int rv = 0; + int rv = 0, ready2go = 1; struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL]; + unsigned long to; /* Make sure the buffer is 8 byte aligned. This is asic specific. */ if (buffer & 0x00000007) { @@ -1186,13 +1237,26 @@ static int mtip_exec_internal_command(struct mtip_port *port, return -EFAULT; } - /* Only one internal command should be running at a time */ - if (test_and_set_bit(MTIP_TAG_INTERNAL, port->allocated)) { + to = jiffies + msecs_to_jiffies(timeout); + do { + ready2go = !test_and_set_bit(MTIP_TAG_INTERNAL, + port->allocated); + if (ready2go) + break; + mdelay(100); + } while (time_before(jiffies, to)); + if (!ready2go) { dev_warn(&port->dd->pdev->dev, - "Internal command already active\n"); + "Internal cmd active. new cmd [%02X]\n", fis->command); return -EBUSY; } set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); + port->ic_pause_timer = 0; + + if (fis->command == ATA_CMD_SEC_ERASE_UNIT) + clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + else if (fis->command == ATA_CMD_DOWNLOAD_MICRO) + clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags); if (atomic == GFP_KERNEL) { if (fis->command != ATA_CMD_STANDBYNOW1) { @@ -1314,6 +1378,10 @@ exec_ic_exit: /* Clear the allocated and active bits for the internal command. */ atomic_set(&int_cmd->active, 0); release_slot(port, MTIP_TAG_INTERNAL); + if (rv >= 0 && mtip_pause_ncq(port, fis)) { + /* NCQ paused */ + return rv; + } clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); @@ -1767,8 +1835,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command) fis.cyl_hi = command[5]; fis.device = command[6] & ~0x10; /* Clear the dev bit*/ - - dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", + dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n", __func__, command[0], command[1], @@ -1795,7 +1862,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command) command[4] = reply->cyl_low; command[5] = reply->cyl_hi; - dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", + dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n", __func__, command[0], command[1], @@ -1838,7 +1905,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command, } dbg_printk(MTIP_DRV_NAME - "%s: User Command: cmd %x, sect %x, " + " %s: User Command: cmd %x, sect %x, " "feat %x, sectcnt %x\n", __func__, command[0], @@ -1867,7 +1934,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command, command[2] = command[3]; dbg_printk(MTIP_DRV_NAME - "%s: Completion Status: stat %x, " + " %s: Completion Status: stat %x, " "err %x, cmd %x\n", __func__, command[0], @@ -2070,9 +2137,10 @@ static int exec_drive_taskfile(struct driver_data *dd, } dbg_printk(MTIP_DRV_NAME - "taskfile: cmd %x, feat %x, nsect %x," + " %s: cmd %x, feat %x, nsect %x," " sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x," " head/dev %x\n", + __func__, fis.command, fis.features, fis.sect_count, @@ -2083,8 +2151,8 @@ static int exec_drive_taskfile(struct driver_data *dd, switch (fis.command) { case ATA_CMD_DOWNLOAD_MICRO: - /* Change timeout for Download Microcode to 60 seconds.*/ - timeout = 60000; + /* Change timeout for Download Microcode to 2 minutes */ + timeout = 120000; break; case ATA_CMD_SEC_ERASE_UNIT: /* Change timeout for Security Erase Unit to 4 minutes.*/ @@ -2100,8 +2168,8 @@ static int exec_drive_taskfile(struct driver_data *dd, timeout = 10000; break; case ATA_CMD_SMART: - /* Change timeout for vendor unique command to 10 secs */ - timeout = 10000; + /* Change timeout for vendor unique command to 15 secs */ + timeout = 15000; break; default: timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS; @@ -2163,18 +2231,8 @@ static int exec_drive_taskfile(struct driver_data *dd, req_task->hob_ports[1] = reply->features_ex; req_task->hob_ports[2] = reply->sect_cnt_ex; } - - /* Com rest after secure erase or lowlevel format */ - if (((fis.command == ATA_CMD_SEC_ERASE_UNIT) || - ((fis.command == 0xFC) && - (fis.features == 0x27 || fis.features == 0x72 || - fis.features == 0x62 || fis.features == 0x26))) && - !(reply->command & 1)) { - mtip_restart_port(dd->port); - } - dbg_printk(MTIP_DRV_NAME - "%s: Completion: stat %x," + " %s: Completion: stat %x," "err %x, sect_cnt %x, lbalo %x," "lbamid %x, lbahi %x, dev %x\n", __func__, @@ -2396,8 +2454,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start, * To prevent this command from being issued * if an internal command is in progress or error handling is active. */ - if (unlikely(test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) || - test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags))) { + if (port->flags & MTIP_PF_PAUSE_IO) { set_bit(tag, port->cmds_to_issue); set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags); return; @@ -2726,8 +2783,7 @@ static int mtip_service_thread(void *data) * is in progress nor error handling is active */ wait_event_interruptible(port->svc_wait, (port->flags) && - !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) && - !test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags)); + !(port->flags & MTIP_PF_PAUSE_IO)); if (kthread_should_stop()) break; @@ -2735,6 +2791,7 @@ static int mtip_service_thread(void *data) if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) break; + set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) { slot = 1; @@ -2773,7 +2830,7 @@ static int mtip_service_thread(void *data) } clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags); - if (test_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &port->flags)) + if (test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags)) break; } return 0; @@ -3421,9 +3478,22 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) int nents = 0; int tag = 0; - if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) { - bio_endio(bio, -ENXIO); - return; + if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) { + if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, + &dd->dd_flag))) { + bio_endio(bio, -ENXIO); + return; + } + if (unlikely(test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))) { + bio_endio(bio, -ENODATA); + return; + } + if (unlikely(test_bit(MTIP_DDF_WRITE_PROTECT_BIT, + &dd->dd_flag) && + bio_data_dir(bio))) { + bio_endio(bio, -ENODATA); + return; + } } if (unlikely(!bio_has_data(bio))) { @@ -3599,7 +3669,7 @@ start_service_thread: dd, thd_name); if (IS_ERR(dd->mtip_svc_handler)) { - printk(KERN_ERR "mtip32xx: service thread failed to start\n"); + dev_err(&dd->pdev->dev, "service thread failed to start\n"); dd->mtip_svc_handler = NULL; rv = -EFAULT; goto kthread_run_error; @@ -3648,7 +3718,7 @@ static int mtip_block_remove(struct driver_data *dd) struct kobject *kobj; if (dd->mtip_svc_handler) { - set_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags); + set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags); wake_up_interruptible(&dd->port->svc_wait); kthread_stop(dd->mtip_svc_handler); } diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 5ad2d79f7c4..4ef58336310 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -34,8 +34,8 @@ /* offset of Device Control register in PCIe extended capabilites space */ #define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48 -/* # of times to retry timed out IOs */ -#define MTIP_MAX_RETRIES 5 +/* # of times to retry timed out/failed IOs */ +#define MTIP_MAX_RETRIES 2 /* Various timeout values in ms */ #define MTIP_NCQ_COMMAND_TIMEOUT_MS 5000 @@ -114,22 +114,32 @@ #define __force_bit2int (unsigned int __force) /* below are bit numbers in 'flags' defined in mtip_port */ -#define MTIP_PF_IC_ACTIVE_BIT 0 -#define MTIP_PF_EH_ACTIVE_BIT 1 -#define MTIP_PF_SVC_THD_ACTIVE_BIT 2 -#define MTIP_PF_ISSUE_CMDS_BIT 4 -#define MTIP_PF_REBUILD_BIT 5 -#define MTIP_PF_SVC_THD_SHOULD_STOP_BIT 8 +#define MTIP_PF_IC_ACTIVE_BIT 0 /* pio/ioctl */ +#define MTIP_PF_EH_ACTIVE_BIT 1 /* error handling */ +#define MTIP_PF_SE_ACTIVE_BIT 2 /* secure erase */ +#define MTIP_PF_DM_ACTIVE_BIT 3 /* download microcde */ +#define MTIP_PF_PAUSE_IO ((1 << MTIP_PF_IC_ACTIVE_BIT) | \ + (1 << MTIP_PF_EH_ACTIVE_BIT) | \ + (1 << MTIP_PF_SE_ACTIVE_BIT) | \ + (1 << MTIP_PF_DM_ACTIVE_BIT)) + +#define MTIP_PF_SVC_THD_ACTIVE_BIT 4 +#define MTIP_PF_ISSUE_CMDS_BIT 5 +#define MTIP_PF_REBUILD_BIT 6 +#define MTIP_PF_SVC_THD_STOP_BIT 8 /* below are bit numbers in 'dd_flag' defined in driver_data */ #define MTIP_DDF_REMOVE_PENDING_BIT 1 -#define MTIP_DDF_RESUME_BIT 2 -#define MTIP_DDF_CLEANUP_BIT 3 -#define MTIP_DDF_INIT_DONE_BIT 4 +#define MTIP_DDF_OVER_TEMP_BIT 2 +#define MTIP_DDF_WRITE_PROTECT_BIT 3 +#define MTIP_DDF_STOP_IO ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ + (1 << MTIP_DDF_OVER_TEMP_BIT) | \ + (1 << MTIP_DDF_WRITE_PROTECT_BIT)) -#define MTIP_DDF_WRITE_PROTECT_BIT 5 -#define MTIP_DDF_OVER_TEMP_BIT 6 -#define MTIP_DDF_REBUILD_FAILED_BIT 7 +#define MTIP_DDF_CLEANUP_BIT 5 +#define MTIP_DDF_RESUME_BIT 6 +#define MTIP_DDF_INIT_DONE_BIT 7 +#define MTIP_DDF_REBUILD_FAILED_BIT 8 __packed struct smart_attr{ u8 attr_id; @@ -393,6 +403,7 @@ struct mtip_port { * Timer used to complete commands that have been active for too long. */ struct timer_list cmd_timer; + unsigned long ic_pause_timer; /* * Semaphore used to block threads if there are no * command slots available. -- cgit v1.2.3-70-g09d2 From 95fea2f1d90626498e2495a81fe5aab7fba9fb3f Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Mon, 9 Apr 2012 08:35:39 +0200 Subject: mtip32xx: dump tagmap on failure Dump tagmap on failure, instead of individual tags. Signed-off-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/mtip32xx.c | 62 +++++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 47404ef5749..00f9fc99209 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -525,6 +525,25 @@ static void mtip_restart_port(struct mtip_port *port) } +/* + * Helper function for tag logging + */ +static void print_tags(struct driver_data *dd, + char *msg, + unsigned long *tagbits, + int cnt) +{ + unsigned char tagmap[128]; + int group, tagmap_len = 0; + + memset(tagmap, 0, sizeof(tagmap)); + for (group = SLOTBITS_IN_LONGS; group > 0; group--) + tagmap_len = sprintf(tagmap + tagmap_len, "%016lX ", + tagbits[group-1]); + dev_warn(&dd->pdev->dev, + "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap); +} + /* * Called periodically to see if any read/write commands are * taking too long to complete. @@ -542,7 +561,7 @@ static void mtip_timeout_function(unsigned long int data) int tag, cmdto_cnt = 0; unsigned int bit, group; unsigned int num_command_slots = port->dd->slot_groups * 32; - unsigned long to; + unsigned long to, tagaccum[SLOTBITS_IN_LONGS]; if (unlikely(!port)) return; @@ -552,6 +571,8 @@ static void mtip_timeout_function(unsigned long int data) jiffies + msecs_to_jiffies(30000)); return; } + /* clear the tag accumulator */ + memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); for (tag = 0; tag < num_command_slots; tag++) { /* @@ -569,9 +590,7 @@ static void mtip_timeout_function(unsigned long int data) command = &port->commands[tag]; fis = (struct host_to_dev_fis *) command->command; - dev_warn(&port->dd->pdev->dev, - "Timeout for command tag %d\n", tag); - + set_bit(tag, tagaccum); cmdto_cnt++; if (cmdto_cnt == 1) set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); @@ -608,9 +627,8 @@ static void mtip_timeout_function(unsigned long int data) } if (cmdto_cnt && !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) { - dev_warn(&port->dd->pdev->dev, - "%d commands timed out: restarting port", - cmdto_cnt); + print_tags(port->dd, "timed out", tagaccum, cmdto_cnt); + mtip_restart_port(port); clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); wake_up_interruptible(&port->svc_wait); @@ -733,23 +751,6 @@ static void mtip_null_completion(struct mtip_port *port, return; } -/* - * Helper function for tag logging - */ -static void print_tags(struct driver_data *dd, - char *msg, - unsigned long *tagbits) -{ - unsigned int tag, count = 0; - - for (tag = 0; tag < (dd->slot_groups) * 32; tag++) { - if (test_bit(tag, tagbits)) - count++; - } - if (count) - dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count); -} - static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer, dma_addr_t buffer_dma, unsigned int sectors); static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id, @@ -770,6 +771,7 @@ static void mtip_handle_tfe(struct driver_data *dd) u32 completed; struct host_to_dev_fis *fis; unsigned long tagaccum[SLOTBITS_IN_LONGS]; + unsigned int cmd_cnt = 0; unsigned char *buf; char *fail_reason = NULL; int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0; @@ -781,6 +783,9 @@ static void mtip_handle_tfe(struct driver_data *dd) /* Stop the timer to prevent command timeouts. */ del_timer(&port->cmd_timer); + /* clear the tag accumulator */ + memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); + /* Set eh_active */ set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); @@ -791,9 +796,6 @@ static void mtip_handle_tfe(struct driver_data *dd) /* clear completed status register in the hardware.*/ writel(completed, port->completed[group]); - /* clear the tag accumulator */ - memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long)); - /* Process successfully completed commands */ for (bit = 0; bit < 32 && completed; bit++) { if (!(completed & (1<commands[tag]; if (likely(cmd->comp_func)) { set_bit(tag, tagaccum); + cmd_cnt++; atomic_set(&cmd->active, 0); cmd->comp_func(port, tag, @@ -824,7 +827,8 @@ static void mtip_handle_tfe(struct driver_data *dd) } } } - print_tags(dd, "TFE tags completed:", tagaccum); + + print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt); /* Restart the port */ mdelay(20); @@ -934,7 +938,7 @@ static void mtip_handle_tfe(struct driver_data *dd) tag); } } - print_tags(dd, "TFE tags reissued:", tagaccum); + print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt); /* clear eh_active */ clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags); -- cgit v1.2.3-70-g09d2 From 511d63cb19329235bc9298b64010ec494b5e1408 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 30 Mar 2012 17:49:53 +0300 Subject: crypto: talitos - properly lock access to global talitos registers Access to global talitos registers must be protected for the case when affinities are configured such that primary and secondary talitos irqs run on different cpus. Signed-off-by: Horia Geanta Signed-off-by: Kim Phillips Signed-off-by: Herbert Xu --- drivers/crypto/talitos.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index dc641c79652..921039e56f8 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -124,6 +124,9 @@ struct talitos_private { void __iomem *reg; int irq[2]; + /* SEC global registers lock */ + spinlock_t reg_lock ____cacheline_aligned; + /* SEC version geometry (from device tree node) */ unsigned int num_channels; unsigned int chfifo_len; @@ -412,6 +415,7 @@ static void talitos_done_##name(unsigned long data) \ { \ struct device *dev = (struct device *)data; \ struct talitos_private *priv = dev_get_drvdata(dev); \ + unsigned long flags; \ \ if (ch_done_mask & 1) \ flush_channel(dev, 0, 0, 0); \ @@ -427,8 +431,10 @@ static void talitos_done_##name(unsigned long data) \ out: \ /* At this point, all completed channels have been processed */ \ /* Unmask done interrupts for channels completed later on. */ \ + spin_lock_irqsave(&priv->reg_lock, flags); \ setbits32(priv->reg + TALITOS_IMR, ch_done_mask); \ setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT); \ + spin_unlock_irqrestore(&priv->reg_lock, flags); \ } DEF_TALITOS_DONE(4ch, TALITOS_ISR_4CHDONE) DEF_TALITOS_DONE(ch0_2, TALITOS_ISR_CH_0_2_DONE) @@ -619,22 +625,28 @@ static irqreturn_t talitos_interrupt_##name(int irq, void *data) \ struct device *dev = data; \ struct talitos_private *priv = dev_get_drvdata(dev); \ u32 isr, isr_lo; \ + unsigned long flags; \ \ + spin_lock_irqsave(&priv->reg_lock, flags); \ isr = in_be32(priv->reg + TALITOS_ISR); \ isr_lo = in_be32(priv->reg + TALITOS_ISR_LO); \ /* Acknowledge interrupt */ \ out_be32(priv->reg + TALITOS_ICR, isr & (ch_done_mask | ch_err_mask)); \ out_be32(priv->reg + TALITOS_ICR_LO, isr_lo); \ \ - if (unlikely((isr & ~TALITOS_ISR_4CHDONE) & ch_err_mask || isr_lo)) \ - talitos_error(dev, isr, isr_lo); \ - else \ + if (unlikely(isr & ch_err_mask || isr_lo)) { \ + spin_unlock_irqrestore(&priv->reg_lock, flags); \ + talitos_error(dev, isr & ch_err_mask, isr_lo); \ + } \ + else { \ if (likely(isr & ch_done_mask)) { \ /* mask further done interrupts. */ \ clrbits32(priv->reg + TALITOS_IMR, ch_done_mask); \ /* done_task will unmask done interrupts at exit */ \ tasklet_schedule(&priv->done_task[tlet]); \ } \ + spin_unlock_irqrestore(&priv->reg_lock, flags); \ + } \ \ return (isr & (ch_done_mask | ch_err_mask) || isr_lo) ? IRQ_HANDLED : \ IRQ_NONE; \ @@ -2719,6 +2731,8 @@ static int talitos_probe(struct platform_device *ofdev) priv->ofdev = ofdev; + spin_lock_init(&priv->reg_lock); + err = talitos_probe_irq(ofdev); if (err) goto err_out; -- cgit v1.2.3-70-g09d2 From 556a0442e08a8bc8541587a349cbf26ed14ec6de Mon Sep 17 00:00:00 2001 From: Chris Rankin Date: Fri, 6 Apr 2012 18:38:18 -0300 Subject: [media] dvb_frontend: regression fix: userspace ABI broken for xine The commit e399ce77e6e has broken the DVB ABI for xine: The problem is that xine is expecting every event after a successful FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless of whether the tuning process has LOCKed yet. What used to happen is that the events inherited the initial tuning parameters from the FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now not initialised until the status contains the FE_HAS_LOCK bit. You might argue that this behaviour is intentional, except that if an application other than xine uses the DVB adapter and manages to set the parameters_out.frequency field to something other than zero, then xine no longer has any problems until either the adapter is replugged or the kernel modules reloaded. This can only mean that the fepriv->parameters_out struct still contains the (stale) tuning information from the previous application. Signed-off-by: Chris Rankin Cc: stable@kernel.org # for kernel version 3.3 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 4555baa383b..e721975476b 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -143,6 +143,8 @@ struct dvb_frontend_private { static void dvb_frontend_wakeup(struct dvb_frontend *fe); static int dtv_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p_out); +static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p); static bool has_get_frontend(struct dvb_frontend *fe) { @@ -697,6 +699,7 @@ restart: fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN; fepriv->delay = HZ / 2; } + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); fe->ops.read_status(fe, &s); if (s != fepriv->status) { dvb_frontend_add_event(fe, s); /* update event list */ @@ -1832,6 +1835,13 @@ static int dtv_set_frontend(struct dvb_frontend *fe) if (dvb_frontend_check_parameters(fe) < 0) return -EINVAL; + /* + * Initialize output parameters to match the values given by + * the user. FE_SET_FRONTEND triggers an initial frontend event + * with status = 0, which copies output parameters to userspace. + */ + dtv_property_legacy_params_sync(fe, &fepriv->parameters_out); + /* * Be sure that the bandwidth will be filled for all * non-satellite systems, as tuners need to know what -- cgit v1.2.3-70-g09d2 From bc169e35e3a72c6888b7d12f50f2c4063436d834 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 31 Mar 2012 05:18:19 -0300 Subject: [media] ivtv: Fix AUDIO_(BILINGUAL_)CHANNEL_SELECT regression When I converted ivtv to the new decoder API I introduced a regression in the support of the old channel select API. Thanks to Martin Dauskardt for reporting this. Signed-off-by: Hans Verkuil Reviewed-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 5452beef8e1..989e556913e 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1763,13 +1763,13 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg); + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg + 1); case AUDIO_BILINGUAL_CHANNEL_SELECT: IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n"); if (iarg > AUDIO_STEREO_SWAPPED) return -EINVAL; - return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg); + return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg + 1); default: return -EINVAL; -- cgit v1.2.3-70-g09d2 From 4da28766140449e04270246fae310c137180652d Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Sun, 25 Mar 2012 06:57:49 -0300 Subject: [media] it913x: fix firmware loading errors On some systems the device does not respond or give obscure values after cold, warm or firmware reboot. This patch retries to get chip version and type 5 times. If it fails it applies chip version 0x1 and type 0x9135. This patch does not fix warm cycle problems from other operating systems and indeed the reverse applies. Users should power off cold boot. Signed-off-by: Malcolm Priestley Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/it913x.c | 54 ++++++++++++++++++++++++++++---------- 1 file changed, 40 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c index 3b7b102f20a..482d249ca7f 100644 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ b/drivers/media/dvb/dvb-usb/it913x.c @@ -238,12 +238,27 @@ static int it913x_read_reg(struct usb_device *udev, u32 reg) static u32 it913x_query(struct usb_device *udev, u8 pro) { - int ret; + int ret, i; u8 data[4]; - ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ, - 0x1222, 0, &data[0], 3); + u8 ver; + + for (i = 0; i < 5; i++) { + ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ, + 0x1222, 0, &data[0], 3); + ver = data[0]; + if (ver > 0 && ver < 3) + break; + msleep(100); + } - it913x_config.chip_ver = data[0]; + if (ver < 1 || ver > 2) { + info("Failed to identify chip version applying 1"); + it913x_config.chip_ver = 0x1; + it913x_config.chip_type = 0x9135; + return 0; + } + + it913x_config.chip_ver = ver; it913x_config.chip_type = (u16)(data[2] << 8) + data[1]; info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver, @@ -660,30 +675,41 @@ static int it913x_download_firmware(struct usb_device *udev, if ((packet_size > min_pkt) || (i == fw->size)) { fw_data = (u8 *)(fw->data + pos); pos += packet_size; - if (packet_size > 0) - ret |= it913x_io(udev, WRITE_DATA, + if (packet_size > 0) { + ret = it913x_io(udev, WRITE_DATA, DEV_0, CMD_SCATTER_WRITE, 0, 0, fw_data, packet_size); + if (ret < 0) + break; + } udelay(1000); } } i++; } - ret |= it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); - - msleep(100); - if (ret < 0) - info("FRM Firmware Download Failed (%04x)" , ret); + info("FRM Firmware Download Failed (%d)" , ret); else info("FRM Firmware Download Completed - Resetting Device"); - ret |= it913x_return_status(udev); + msleep(30); + + ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0); + if (ret < 0) + info("FRM Device not responding to reboot"); + + ret = it913x_return_status(udev); + if (ret == 0) { + info("FRM Failed to reboot device"); + return -ENODEV; + } msleep(30); - ret |= it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400); + ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400); + + msleep(30); /* Tuner function */ if (it913x_config.dual_mode) @@ -901,5 +927,5 @@ module_usb_driver(it913x_driver); MODULE_AUTHOR("Malcolm Priestley "); MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.27"); +MODULE_VERSION("1.28"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From c065f5b4ee4487bbd411049be6eea1b59a90db96 Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Tue, 27 Mar 2012 12:53:19 -0300 Subject: [media] dvb_frontend: fix compiler warning has_get_frontend() should return a boolean, not a pointer. Signed-off-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index e721975476b..39696c6a4ed 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -148,7 +148,7 @@ static int dtv_property_legacy_params_sync(struct dvb_frontend *fe, static bool has_get_frontend(struct dvb_frontend *fe) { - return fe->ops.get_frontend; + return fe->ops.get_frontend != NULL; } /* -- cgit v1.2.3-70-g09d2 From ed0ee0ce0a3224dab5caa088a5f8b6df25924276 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 27 Mar 2012 05:51:00 -0300 Subject: [media] uvcvideo: Fix race-related crash in uvc_video_clock_update() The driver frees the clock samples buffer before stopping the video buffers queue. If a DQBUF call arrives in-between, uvc_video_clock_update() will be called with a NULL clock samples buffer, leading to a crash. This occurs very frequently when using the webcam with the flash browser plugin. Move clock initialization/cleanup to uvc_video_enable() in order to free the clock samples buffer after the queue is stopped. Make sure the clock is reset at resume time to avoid miscalculating timestamps. Signed-off-by: Laurent Pinchart Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 50 ++++++++++++++++++++++++------------- 1 file changed, 32 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 4a44f9a1bae..b76b0ac0958 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -468,22 +468,30 @@ uvc_video_clock_decode(struct uvc_streaming *stream, struct uvc_buffer *buf, spin_unlock_irqrestore(&stream->clock.lock, flags); } -static int uvc_video_clock_init(struct uvc_streaming *stream) +static void uvc_video_clock_reset(struct uvc_streaming *stream) { struct uvc_clock *clock = &stream->clock; - spin_lock_init(&clock->lock); clock->head = 0; clock->count = 0; - clock->size = 32; clock->last_sof = -1; clock->sof_offset = -1; +} + +static int uvc_video_clock_init(struct uvc_streaming *stream) +{ + struct uvc_clock *clock = &stream->clock; + + spin_lock_init(&clock->lock); + clock->size = 32; clock->samples = kmalloc(clock->size * sizeof(*clock->samples), GFP_KERNEL); if (clock->samples == NULL) return -ENOMEM; + uvc_video_clock_reset(stream); + return 0; } @@ -1424,8 +1432,6 @@ static void uvc_uninit_video(struct uvc_streaming *stream, int free_buffers) if (free_buffers) uvc_free_urb_buffers(stream); - - uvc_video_clock_cleanup(stream); } /* @@ -1555,10 +1561,6 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) uvc_video_stats_start(stream); - ret = uvc_video_clock_init(stream); - if (ret < 0) - return ret; - if (intf->num_altsetting > 1) { struct usb_host_endpoint *best_ep = NULL; unsigned int best_psize = 3 * 1024; @@ -1683,6 +1685,8 @@ int uvc_video_resume(struct uvc_streaming *stream, int reset) stream->frozen = 0; + uvc_video_clock_reset(stream); + ret = uvc_commit_video(stream, &stream->ctrl); if (ret < 0) { uvc_queue_enable(&stream->queue, 0); @@ -1819,25 +1823,35 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable) uvc_uninit_video(stream, 1); usb_set_interface(stream->dev->udev, stream->intfnum, 0); uvc_queue_enable(&stream->queue, 0); + uvc_video_clock_cleanup(stream); return 0; } - ret = uvc_queue_enable(&stream->queue, 1); + ret = uvc_video_clock_init(stream); if (ret < 0) return ret; + ret = uvc_queue_enable(&stream->queue, 1); + if (ret < 0) + goto error_queue; + /* Commit the streaming parameters. */ ret = uvc_commit_video(stream, &stream->ctrl); - if (ret < 0) { - uvc_queue_enable(&stream->queue, 0); - return ret; - } + if (ret < 0) + goto error_commit; ret = uvc_init_video(stream, GFP_KERNEL); - if (ret < 0) { - usb_set_interface(stream->dev->udev, stream->intfnum, 0); - uvc_queue_enable(&stream->queue, 0); - } + if (ret < 0) + goto error_video; + + return 0; + +error_video: + usb_set_interface(stream->dev->udev, stream->intfnum, 0); +error_commit: + uvc_queue_enable(&stream->queue, 0); +error_queue: + uvc_video_clock_cleanup(stream); return ret; } -- cgit v1.2.3-70-g09d2 From b78f29ca0516266431688c5eb42d39ce42ec039a Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Sun, 1 Apr 2012 08:54:02 +0800 Subject: video:uvesafb: Fix oops that uvesafb try to execute NX-protected page This patch fix the oops below that catched in my machine [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [] fb_pan_display+0x10c/0x160 [ 81.744226] [] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [] bit_update_start+0x1d/0x50 [ 81.744232] [] fbcon_switch+0x39e/0x550 [ 81.744235] [] ? bit_cursor+0x4ea/0x560 [ 81.744240] [] redraw_screen+0x12b/0x220 [ 81.744245] [] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [] vc_resize+0x14/0x20 [ 81.744253] [] fbcon_init+0x29d/0x500 [ 81.744255] [] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [] visual_init+0xb8/0x150 [ 81.744261] [] bind_con_driver+0x16c/0x360 [ 81.744264] [] ? register_con_driver+0x6e/0x190 [ 81.744267] [] take_over_console+0x41/0x50 [ 81.744269] [] fbcon_takeover+0x6a/0xd0 [ 81.744272] [] fbcon_event_notify+0x758/0x790 [ 81.744277] [] notifier_call_chain+0x42/0xb0 [ 81.744280] [] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [] ? ioremap_wc+0x33/0x40 [ 81.744298] [] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [] platform_drv_probe+0xf/0x20 [ 81.744306] [] driver_probe_device+0x68/0x170 [ 81.744309] [] __device_attach+0x41/0x50 [ 81.744313] [] bus_for_each_drv+0x48/0x70 [ 81.744316] [] device_attach+0x83/0xa0 [ 81.744319] [] ? __driver_attach+0x90/0x90 [ 81.744321] [] bus_probe_device+0x6f/0x90 [ 81.744324] [] device_add+0x5e5/0x680 [ 81.744329] [] ? kvasprintf+0x43/0x60 [ 81.744332] [] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [] platform_device_add+0xff/0x1b0 [ 81.744343] [] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [] do_one_initcall+0x2f/0x170 [ 81.744350] [] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [] sys_init_module+0xf4/0x1410 [ 81.744359] [] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by: Wang YanQing Cc: Michal Januszewski Cc: Alan Cox Signed-off-by: Florian Tobias Schandinat Cc: stable@vger.kernel.org --- drivers/video/uvesafb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index 260cca7ddb4..26e83d7fdd6 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -815,8 +815,15 @@ static int __devinit uvesafb_vbe_init(struct fb_info *info) par->pmi_setpal = pmi_setpal; par->ypan = ypan; - if (par->pmi_setpal || par->ypan) - uvesafb_vbe_getpmi(task, par); + if (par->pmi_setpal || par->ypan) { + if (__supported_pte_mask & _PAGE_NX) { + par->pmi_setpal = par->ypan = 0; + printk(KERN_WARNING "uvesafb: NX protection is actively." + "We have better not to use the PMI.\n"); + } else { + uvesafb_vbe_getpmi(task, par); + } + } #else /* The protected mode interface is not available on non-x86. */ par->pmi_setpal = par->ypan = 0; -- cgit v1.2.3-70-g09d2 From 388bc26226807fbcf4c626b81bb17a2e74aa4b1b Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 21 Mar 2012 17:22:22 +0530 Subject: omap-serial: Fix the error handling in the omap_serial probe The patch does the following - The pm_runtime_disable is called in the remove not in the error case of probe.The patch calls the pm_runtime_disable in the error case. - Calls pm_runtime_put in the error case. - The up is not freed in the error path. Fix the memory leak by using devm_* so that the memory need not be freed in the driver. - Also the iounmap is not called fix the same by calling using devm_ioremap. - Make the name of the error tags more meaningful. Cc: Mark Brown Cc: Govindraj.R Signed-off-by: Shubhrajyoti D Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 43 +++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0121486ac4f..d00b38eb268 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(mem->start, resource_size(mem), + if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem), pdev->dev.driver->name)) { dev_err(&pdev->dev, "memory region already claimed\n"); return -EBUSY; } dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) { - ret = -EINVAL; - goto err; - } + if (!dma_rx) + return -ENXIO; dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) { - ret = -EINVAL; - goto err; - } + if (!dma_tx) + return -ENXIO; + + up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (up == NULL) { - ret = -ENOMEM; - goto do_release_region; - } up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", up->port.line); ret = -ENODEV; - goto err; + goto err_port_line; } sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; - up->port.membase = ioremap(mem->start, resource_size(mem)); + up->port.membase = devm_ioremap(&pdev->dev, mem->start, + resource_size(mem)); if (!up->port.membase) { dev_err(&pdev->dev, "can't ioremap UART\n"); ret = -ENOMEM; - goto err; + goto err_ioremap; } up->port.flags = omap_up_info->flags; @@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev) ret = uart_add_one_port(&serial_omap_reg, &up->port); if (ret != 0) - goto do_release_region; + goto err_add_port; pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; -err: + +err_add_port: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); +err_ioremap: +err_port_line: dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", pdev->id, __func__, ret); -do_release_region: - release_mem_region(mem->start, resource_size(mem)); return ret; } @@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev) pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); - - kfree(up); } platform_set_drvdata(dev, NULL); -- cgit v1.2.3-70-g09d2 From ef37ea34cac19ef46173b26ee47a102f3b987d1e Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Sun, 25 Mar 2012 19:12:37 +0200 Subject: isdn/gigaset: use gig_dbg() for debugging output The "TTY buffer in tty_port" patchset introduced an opencoded debug message in the Gigaset tty device if_close() function. Change it to use the gig_dbg() macro like everywhere else in the driver. Signed-off-by: Tilman Schmidt Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/isdn/gigaset/interface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index b3d6ac17272..a6d9fd2858f 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -176,7 +176,7 @@ static void if_close(struct tty_struct *tty, struct file *filp) struct cardstate *cs = tty->driver_data; if (!cs) { /* happens if we didn't find cs in open */ - printk(KERN_DEBUG "%s: no cardstate\n", __func__); + gig_dbg(DEBUG_IF, "%s: no cardstate", __func__); return; } -- cgit v1.2.3-70-g09d2 From acede70d6561f2d042d9dbb153d9a3469479c0ed Mon Sep 17 00:00:00 2001 From: Yuriy Kozlov Date: Thu, 29 Mar 2012 09:55:27 +0200 Subject: tty: serial: altera_uart: Check for NULL platform_data in probe. Follow altera_jtag_uart. This fixes a crash if there is a mistake in the DTS. Signed-off-by: Yuriy Kozlov Signed-off-by: Tobias Klauser Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_uart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index e7903751e05..1f0330915d5 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res_mem) port->mapbase = res_mem->start; - else if (platp->mapbase) + else if (platp) port->mapbase = platp->mapbase; else return -EINVAL; @@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res_irq) port->irq = res_irq->start; - else if (platp->irq) + else if (platp) port->irq = platp->irq; /* Check platform data first so we can override device node data */ -- cgit v1.2.3-70-g09d2 From 57c3686842114de3b0c00633591e9605c46fb769 Mon Sep 17 00:00:00 2001 From: "Siftar, Gabe" Date: Thu, 29 Mar 2012 15:40:05 +0200 Subject: tty/serial: atmel_serial: fix RS485 half-duplex problem On our custom board, we are using RS485 in half-duplex mode on an AT91SAM9G45. SER_RS485_RX_DURING_TX is not set as we do not want to receive the data we transmit (our transceiver will receive transmitted data). Although the current driver attempts to disable and enable the receiver at the appropriate points, incoming data is still loaded into the receive register causing our code to receive the very last byte that was sent once the receiver is enabled. I ran this by Atmel support and they wrote: "The issue comes from the fact that you disable the PDC/DMA Reception and not the USART Reception channel. In your case, the[n] you will still receive data into the USART_RHR register, and maybe you [h]ave the overrun flag set. So please disable the USART reception channel." The following patch should force the driver to enable/disable the receiver via RXEN/RXDIS fields of the USART control register. It fixed the issue I was having. Signed-off-by: Gabe Siftar [nicolas.ferre@atmel.com: slightly modify commit message] Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f9a6be7a9be..3d7e1ee2fa5 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port) { UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + UART_PUT_CR(port, ATMEL_US_RXEN); + if (atmel_use_dma_rx(port)) { /* enable PDC controller */ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | @@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port) */ static void atmel_stop_rx(struct uart_port *port) { + UART_PUT_CR(port, ATMEL_US_RXDIS); + if (atmel_use_dma_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); -- cgit v1.2.3-70-g09d2 From 5da527aafed2834852fc4fe21daeaeadf7c61af3 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 3 Apr 2012 03:18:23 +0200 Subject: printk(): add KERN_CONT where needed in hpet and vt code A prototype for kmsg records instead of a byte-stream buffer revealed a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce one record per printk() call, while all should have ended up in a single record. Instead of: ACPI: (supports S0 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 It prints: ACPI: (supports S0 S5 ) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11 ) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 Cc: Andrew Morton Cc: Len Brown Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/char/hpet.c | 4 ++-- drivers/tty/vt/vt.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 3845ab44c33..dfd7876f127 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -906,8 +906,8 @@ int hpet_alloc(struct hpet_data *hdp) hpetp->hp_which, hdp->hd_phys_address, hpetp->hp_ntimer > 1 ? "s" : ""); for (i = 0; i < hpetp->hp_ntimer; i++) - printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); - printk("\n"); + printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); + printk(KERN_CONT "\n"); temp = hpetp->hp_tick_freq; remainder = do_div(temp, 1000000); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 3bdd4b19dd0..2156188db4a 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2932,11 +2932,10 @@ static int __init con_init(void) gotoxy(vc, vc->vc_x, vc->vc_y); csi_J(vc, 0); update_screen(vc); - pr_info("Console: %s %s %dx%d", + pr_info("Console: %s %s %dx%d\n", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); printable = 1; - printk("\n"); console_unlock(); -- cgit v1.2.3-70-g09d2 From 7b246a1d0dfe75346a22bf6589b858a0389e6df1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 3 Apr 2012 18:14:24 -0700 Subject: serial: samsung: fix omission initialize ulcon in reset port fn() Fix omission initialize ulcon in s3c24xx_serial_resetport(), reset port function in drivers/tty/serial/samsung.c. It has been happened from commit 0dfb3b41("serial: samsung: merge all SoC specific port reset functions") Signed-off-by: Kukjin Kim Cc: stable [3.3] Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index de249d265be..d8b0aee3563 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); -- cgit v1.2.3-70-g09d2 From d8c4019b41aaf4d6401a4ceb3819b8e1afe21595 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 Apr 2012 16:32:17 -0600 Subject: tty/serial/omap: console can only be built-in When the omap serial driver is built as a module, we must not allow the console driver to be selected, because consoles can not be loadable modules. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Acked-by: Govindraj.R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 665beb68f67..070b442c1f8 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1041,7 +1041,7 @@ config SERIAL_OMAP config SERIAL_OMAP_CONSOLE bool "Console on OMAP serial port" - depends on SERIAL_OMAP + depends on SERIAL_OMAP=y select SERIAL_CORE_CONSOLE help Select this option if you would like to use omap serial port as -- cgit v1.2.3-70-g09d2 From 3579812373aba92b2f3b632bdf99329bc3c05d62 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:37 -0700 Subject: Revert "serial/8250_pci: init-quirk msi support for kt serial controller" This reverts commit e86ff4a63c9fdd875ba8492577cd1ad2252f525c. This tried to enforce the semantics of one interrupt per iir read of the THRE (transmit-hold empty) status, but events from other sources (particularly modem status) defeat this guarantee. This change also broke 8250_pci suspend/resume support as pciserial_resume_ports() re-runs .init() quirks, but does not run .exit() quirks in pciserial_suspend_ports() leading to reports like: sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:16.3/msi_irqs' ...and a subsequent crash. The mismatch of init/exit at suspend/resume seems like a bug in its own right. [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index da2b0b0a183..1d4ccf8c887 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int try_enable_msi(struct pci_dev *dev) -{ - /* use msi if available, but fallback to legacy otherwise */ - pci_enable_msi(dev); - return 0; -} - -static void disable_msi(struct pci_dev *dev) -{ - pci_disable_msi(dev); -} - #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = try_enable_msi, .setup = kt_serial_setup, - .exit = disable_msi, }, /* * ITE -- cgit v1.2.3-70-g09d2 From 49b532f96fda23663f8be35593d1c1372c0f91e0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:44 -0700 Subject: Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7. The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race condition in the kt serial's iir register if the only source of interrupts is THRE (fifo-empty) events. An modem status event at the wrong time can again cause an iir read to drop the 'empty' status leading to a hang. So, revert this in preparation for using the existing "I don't trust my iir register" workaround in the 8250 core (UART_BUG_THRE). [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 4 +--- drivers/tty/serial/8250/8250_pci.c | 17 +---------------- include/linux/serial_core.h | 1 - 3 files changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 5b149b466ec..56492d208a7 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) do { struct uart_8250_port *up; struct uart_port *port; - bool skip; up = list_entry(l, struct uart_8250_port, list); port = &up->port; - skip = pass_counter && up->port.flags & UPF_IIR_ONCE; - if (!skip && port->handle_irq(port)) { + if (port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 1d4ccf8c887..105dcfbd3d3 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,14 +1092,6 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int kt_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - port->flags |= UPF_IIR_ONCE; - return skip_tx_en_setup(priv, board, port, idx); -} - static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1118,6 +1110,7 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1147,7 +1140,6 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 -#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1232,13 +1224,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = kt_serial_setup, - }, /* * ITE */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f51bf2e70c6..882f1d61aa5 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,7 +357,6 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) -#define UPF_IIR_ONCE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3-70-g09d2 From bc02d15a3452fdf9276e8fb89c5e504a88df888a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:50 -0700 Subject: serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Workaround dropped notifications in the iir register. Register reads coincident with new interrupt notifications sometimes result in this device clearing the interrupt event without reporting it in the read data. The serial core already has a heuristic for determining when a device has an untrustworthy iir register. In this case when we apriori know that the iir is faulty use a flag (UPF_BUG_THRE) to bypass the test and force usage of the background timer. [stable: 3.3.x] Acked-by: Alan Cox Cc: stable Reported-by: Nhan H Mai Reported-by: Sudhakar Mamillapalli Tested-by: Nhan H Mai Tested-by: Sudhakar Mamillapalli Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 8 +++++--- drivers/tty/serial/8250/8250_pci.c | 17 ++++++++++++++++- include/linux/serial_core.h | 1 + 3 files changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 56492d208a7..5c27f7e6c9f 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -2035,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { up->bugs |= UART_BUG_THRE; pr_debug("ttyS%d - using backup timer\n", serial_index(port)); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 105dcfbd3d3..858dca865d6 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,6 +1092,14 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_BUG_THRE; + return skip_tx_en_setup(priv, board, port, idx); +} + static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1110,7 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1140,6 +1147,7 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1224,6 +1232,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = kt_serial_setup, + }, /* * ITE */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 882f1d61aa5..2db407a4005 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -357,6 +357,7 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) +#define UPF_BUG_THRE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) -- cgit v1.2.3-70-g09d2 From 867c902e07d5677e2a5b54c0435e589513abde48 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 2 Apr 2012 14:36:22 +0900 Subject: pch_uart: Fix MSI setting issue The following patch (MSI setting) is not enough. commit e463595fd9c752fa4bf06b47df93ef9ade3c7cf0 Author: Alexander Stein Date: Mon Jul 4 08:58:31 2011 +0200 pch_uart: Add MSI support Signed-off-by: Alexander Stein Signed-off-by: Greg Kroah-Hartman To enable MSI mode, PCI bus-mastering must be enabled. This patch enables the setting. cc: Alexander Stein Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index e825460478b..afa060fde11 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1655,6 +1655,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, } pci_enable_msi(pdev); + pci_set_master(pdev); iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); -- cgit v1.2.3-70-g09d2 From 11bbd5b6dae49fd7072ebf5eb63735827bd72f42 Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Fri, 23 Mar 2012 11:06:37 +0100 Subject: pch_uart: Add Kontron COMe-mTT10 uart clock quirk Add UART clock quirk for the Kontron COMe-mTT10 module. The board has previously been called nanoETXexpress-TT, therefore this is also checked. As suggested by Darren Hart the comparison in this patch version is placed after the FRI2 checks to ensure it will also work with possible upcoming changes to the FRI2 firmware. This patch follows the patchset submitted by Darren Hart at commit a46f5533ecfc7bbdd646d84fdab8656031a715c6. Signed-off-by: Michael Brunner Acked-by: Darren Hart Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index afa060fde11..8a18eb04530 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -210,6 +210,7 @@ enum { #define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ #define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ #define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ +#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -388,6 +389,12 @@ static int pch_uart_get_uartclk(void) if (cmp && strstr(cmp, "Fish River Island II")) return FRI2_48_UARTCLK; + /* Kontron COMe-mTT10 (nanoETXexpress-TT) */ + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && (strstr(cmp, "COMe-mTT") || + strstr(cmp, "nanoETXexpress-TT"))) + return NTC1_UARTCLK; + return DEFAULT_UARTCLK; } -- cgit v1.2.3-70-g09d2 From 8528e07edfc6ac5a793509f305b9c3c4fb3672c0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 28 Mar 2012 08:35:26 -0700 Subject: hwmon: (smsc47b397) Fix compiler warning Some configurations produce the following compiler warning: drivers/hwmon/smsc47b397.c: In function 'smsc47b397_init': drivers/hwmon/smsc47b397.c:385: warning: 'address' may be used uninitialized in this function While this is a false positive, it can easily be fixed by overloading the return value from smsc47b397_find with both address and error return code (the address is an unsigned short and thus never negative). This also reduces module size by a few bytes (64 bytes for x86_64). Cc: Mark M. Hoffman Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson Acked-by: Jean Delvare --- drivers/hwmon/smsc47b397.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index d3b778da3f8..c5f6be478ba 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -343,10 +343,11 @@ exit: return err; } -static int __init smsc47b397_find(unsigned short *addr) +static int __init smsc47b397_find(void) { u8 id, rev; char *name; + unsigned short addr; superio_enter(); id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); @@ -370,14 +371,14 @@ static int __init smsc47b397_find(unsigned short *addr) rev = superio_inb(SUPERIO_REG_DEVREV); superio_select(SUPERIO_REG_LD8); - *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) + addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) | superio_inb(SUPERIO_REG_BASE_LSB); pr_info("found SMSC %s (base address 0x%04x, revision %u)\n", - name, *addr, rev); + name, addr, rev); superio_exit(); - return 0; + return addr; } static int __init smsc47b397_init(void) @@ -385,9 +386,10 @@ static int __init smsc47b397_init(void) unsigned short address; int ret; - ret = smsc47b397_find(&address); - if (ret) + ret = smsc47b397_find(); + if (ret < 0) return ret; + address = ret; ret = platform_driver_register(&smsc47b397_driver); if (ret) -- cgit v1.2.3-70-g09d2 From 776cdc11b3b0fc21e34600e22abe1c8209d2f3f0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 28 Mar 2012 09:03:26 -0700 Subject: hwmon: (acpi_power_meter) Fix compiler warning seen in some configurations In some configurations, BUG() does not result in an endless loop but returns to the caller. This results in the following compiler warning: drivers/hwmon/acpi_power_meter.c: In function 'show_str': drivers/hwmon/acpi_power_meter.c:380: warning: 'val' may be used uninitialized in this function Fix the warning by setting val to an empty string after BUG(). Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson --- drivers/hwmon/acpi_power_meter.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 145f13580ff..9140236a018 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -391,6 +391,7 @@ static ssize_t show_str(struct device *dev, break; default: BUG(); + val = ""; } return sprintf(buf, "%s\n", val); -- cgit v1.2.3-70-g09d2 From 1d0045ee4a220872b65147b5b290e4a4852386d9 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 28 Mar 2012 08:55:12 -0700 Subject: hwmon: (smsc47m1) Fix compiler warning Some configurations produce the following compiler warning: drivers/hwmon/smsc47m1.c: In function 'sm_smsc47m1_init': drivers/hwmon/smsc47m1.c:938: warning: 'address' may be used uninitialized in this function While this is a false positive, it can easily be fixed by overloading the return value from smsc47m1_find with both address and error return code (the address is an unsigned short and thus never negative). This also reduces module size by a few bytes (46 bytes for x86_64). Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson --- drivers/hwmon/smsc47m1.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index c590c146979..b5aa38dd7ab 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -491,10 +491,10 @@ static const struct attribute_group smsc47m1_group = { .attrs = smsc47m1_attributes, }; -static int __init smsc47m1_find(unsigned short *addr, - struct smsc47m1_sio_data *sio_data) +static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data) { u8 val; + unsigned short addr; superio_enter(); val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID); @@ -546,9 +546,9 @@ static int __init smsc47m1_find(unsigned short *addr, } superio_select(); - *addr = (superio_inb(SUPERIO_REG_BASE) << 8) + addr = (superio_inb(SUPERIO_REG_BASE) << 8) | superio_inb(SUPERIO_REG_BASE + 1); - if (*addr == 0) { + if (addr == 0) { pr_info("Device address not set, will not use\n"); superio_exit(); return -ENODEV; @@ -565,7 +565,7 @@ static int __init smsc47m1_find(unsigned short *addr, } superio_exit(); - return 0; + return addr; } /* Restore device to its initial state */ @@ -938,13 +938,15 @@ static int __init sm_smsc47m1_init(void) unsigned short address; struct smsc47m1_sio_data sio_data; - if (smsc47m1_find(&address, &sio_data)) - return -ENODEV; + err = smsc47m1_find(&sio_data); + if (err < 0) + return err; + address = err; /* Sets global pdev as a side effect */ err = smsc47m1_device_add(address, &sio_data); if (err) - goto exit; + return err; err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe); if (err) @@ -955,7 +957,6 @@ static int __init sm_smsc47m1_init(void) exit_device: platform_device_unregister(pdev); smsc47m1_restore(&sio_data); -exit: return err; } -- cgit v1.2.3-70-g09d2 From d7ee11157f1fce02632e2f3a56b99b2afd9e5f93 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 28 Mar 2012 09:14:03 -0700 Subject: hwmon: (pmbus_core) Fix compiler warning Some configurations produce the following compiler warning: drivers/hwmon/pmbus/pmbus_core.c: In function 'pmbus_show_boolean': drivers/hwmon/pmbus/pmbus_core.c:752: warning: 'val' may be used uninitialized in this function While this is a false positive, it can easily be fixed by overloading the return value from pmbus_get_boolean with both val and error return code (val is a boolean and thus never negative). Signed-off-by: Guenter Roeck Reviewed-by: Robert Coulson --- drivers/hwmon/pmbus/pmbus_core.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index be51037363c..29b319db573 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -710,13 +710,13 @@ static u16 pmbus_data2reg(struct pmbus_data *data, * If a negative value is stored in any of the referenced registers, this value * reflects an error code which will be returned. */ -static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) +static int pmbus_get_boolean(struct pmbus_data *data, int index) { u8 s1 = (index >> 24) & 0xff; u8 s2 = (index >> 16) & 0xff; u8 reg = (index >> 8) & 0xff; u8 mask = index & 0xff; - int status; + int ret, status; u8 regval; status = data->status[reg]; @@ -725,7 +725,7 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) regval = status & mask; if (!s1 && !s2) - *val = !!regval; + ret = !!regval; else { long v1, v2; struct pmbus_sensor *sensor1, *sensor2; @@ -739,9 +739,9 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) v1 = pmbus_reg2data(data, sensor1); v2 = pmbus_reg2data(data, sensor2); - *val = !!(regval && v1 >= v2); + ret = !!(regval && v1 >= v2); } - return 0; + return ret; } static ssize_t pmbus_show_boolean(struct device *dev, @@ -750,11 +750,10 @@ static ssize_t pmbus_show_boolean(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct pmbus_data *data = pmbus_update_device(dev); int val; - int err; - err = pmbus_get_boolean(data, attr->index, &val); - if (err) - return err; + val = pmbus_get_boolean(data, attr->index); + if (val < 0) + return val; return snprintf(buf, PAGE_SIZE, "%d\n", val); } -- cgit v1.2.3-70-g09d2 From b2a71642b8bfa1965700ba248a99016e4d6b685d Mon Sep 17 00:00:00 2001 From: acreese Date: Wed, 4 Apr 2012 16:22:32 -0700 Subject: drm/i915: Removed IVB forced enable of sprite dest key. The destination color key is always enabled for IVB. Removed the line that does this. Signed-off-by: Armin Reese Acked-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sprite.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index a464771a724..e90dfb625c4 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -95,7 +95,6 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, /* must disable */ sprctl |= SPRITE_TRICKLE_FEED_DISABLE; sprctl |= SPRITE_ENABLE; - sprctl |= SPRITE_DEST_KEY; /* Sizes are 0 based */ src_w--; -- cgit v1.2.3-70-g09d2 From 14667a4bde4361b7ac420d68a2e9e9b9b2df5231 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 3 Apr 2012 17:58:35 +0100 Subject: drm/i915: Finish any pending operations on the framebuffer before disabling Similar to the case where we are changing from one framebuffer to another, we need to be sure that there are no pending WAIT_FOR_EVENTs on the pipe for the current framebuffer before switching. If we disable the pipe, and then try to execute a WAIT_FOR_EVENT it will block indefinitely and cause a GPU hang. We attempted to fix this in commit 85345517fe6d4de27b0d6ca19fef9d28ac947c4a (drm/i915: Retire any pending operations on the old scanout when switching) for the case of mode switching, but this leaves the condition where we are switching off the pipe vulnerable. There still remains the race condition were a display may be unplugged, switched off by the core, a uevent sent to notify the DDX and the DDX may issue a WAIT_FOR_EVENT before it processes the uevent. This window does not exist if the pipe is only switched off in response to the uevent. Time to make sure that is so... Reported-by: Francis Leblanc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36515 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45413 Signed-off-by: Chris Wilson Reviewed-by: Eugeni Dodonov [danvet: fixup spelling in comment, noticed by Eugeni.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 65 +++++++++++++++++++++++++----------- 1 file changed, 46 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b35fd1db8..f446e66cbda 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2244,6 +2244,33 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, return 0; } +static int +intel_finish_fb(struct drm_framebuffer *old_fb) +{ + struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; + struct drm_i915_private *dev_priv = obj->base.dev->dev_private; + bool was_interruptible = dev_priv->mm.interruptible; + int ret; + + wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || + atomic_read(&obj->pending_flip) == 0); + + /* Big Hammer, we also need to ensure that any pending + * MI_WAIT_FOR_EVENT inside a user batch buffer on the + * current scanout is retired before unpinning the old + * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. + */ + dev_priv->mm.interruptible = false; + ret = i915_gem_object_finish_gpu(obj); + dev_priv->mm.interruptible = was_interruptible; + + return ret; +} + static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) @@ -2282,25 +2309,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - if (old_fb) { - struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; - - wait_event(dev_priv->pending_flip_queue, - atomic_read(&dev_priv->mm.wedged) || - atomic_read(&obj->pending_flip) == 0); - - /* Big Hammer, we also need to ensure that any pending - * MI_WAIT_FOR_EVENT inside a user batch buffer on the - * current scanout is retired before unpinning the old - * framebuffer. - * - * This should only fail upon a hung GPU, in which case we - * can safely continue. - */ - ret = i915_gem_object_finish_gpu(obj); - (void) ret; - } + if (old_fb) + intel_finish_fb(old_fb); ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, LEAVE_ATOMIC_MODE_SET); @@ -3371,6 +3381,23 @@ static void intel_crtc_disable(struct drm_crtc *crtc) struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; + /* Flush any pending WAITs before we disable the pipe. Note that + * we need to drop the struct_mutex in order to acquire it again + * during the lowlevel dpms routines around a couple of the + * operations. It does not look trivial nor desirable to move + * that locking higher. So instead we leave a window for the + * submission of further commands on the fb before we can actually + * disable it. This race with userspace exists anyway, and we can + * only rely on the pipe being disabled by userspace after it + * receives the hotplug notification and has flushed any pending + * batches. + */ + if (crtc->fb) { + mutex_lock(&dev->struct_mutex); + intel_finish_fb(crtc->fb); + mutex_unlock(&dev->struct_mutex); + } + crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); -- cgit v1.2.3-70-g09d2 From 0298dc9f2273fb2d596ae10d7700f054bfce601d Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 3 Apr 2012 15:31:41 -0500 Subject: rtlwifi: rtl8192de: Fix firmware initialization Before the switch to asynchronous firmware loading (mainline commit b0302ab), it was necessary to load firmware when initializing the first of the units in a dual-mac system. After the change, it is necessary to load firmware in both units. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192de/sw.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c index 4898c502974..480862c07f9 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c @@ -91,7 +91,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) u8 tid; struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); - static int header_print; rtlpriv->dm.dm_initialgain_enable = true; rtlpriv->dm.dm_flag = 0; @@ -171,10 +170,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) for (tid = 0; tid < 8; tid++) skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]); - /* Only load firmware for first MAC */ - if (header_print) - return 0; - /* for firmware buf */ rtlpriv->rtlhal.pfirmware = vzalloc(0x8000); if (!rtlpriv->rtlhal.pfirmware) { @@ -186,7 +181,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw) rtlpriv->max_fw_size = 0x8000; pr_info("Driver for Realtek RTL8192DE WLAN interface\n"); pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name); - header_print++; /* request fw */ err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name, -- cgit v1.2.3-70-g09d2 From e89f7690a3adbde0af7c294f83c242ba6a367ef0 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 6 Apr 2012 16:54:17 -0500 Subject: rtlwifi: Fix oops on rate-control failure When the rate-control indexing is incorrectly set up, mac80211 issues a warning and returns NULL from the call to ieee80211_get_tx_rate(). When this happens, avoid a NULL pointer dereference. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/base.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 510023554e5..e54488db0e1 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -838,7 +838,10 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw, __le16 fc = hdr->frame_control; txrate = ieee80211_get_tx_rate(hw, info); - tcb_desc->hw_rate = txrate->hw_value; + if (txrate) + tcb_desc->hw_rate = txrate->hw_value; + else + tcb_desc->hw_rate = 0; if (ieee80211_is_data(fc)) { /* -- cgit v1.2.3-70-g09d2 From 33cb4f345687a27e3fece0a7fcf78ac2e7b0a7d6 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 20 Mar 2012 16:32:39 +0800 Subject: drivers/base: Remove unneeded spin_lock_init call for soc_lock soc_lock is already initialized by DEFINE_SPINLOCK. Signed-off-by: Axel Lin Signed-off-by: Greg Kroah-Hartman --- drivers/base/soc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/soc.c b/drivers/base/soc.c index 05f150382da..f49346b9e96 100644 --- a/drivers/base/soc.c +++ b/drivers/base/soc.c @@ -168,8 +168,6 @@ void soc_device_unregister(struct soc_device *soc_dev) static int __init soc_bus_register(void) { - spin_lock_init(&soc_lock); - return bus_register(&soc_bus_type); } core_initcall(soc_bus_register); -- cgit v1.2.3-70-g09d2 From 3a4ffe930a2d2dad07604fe74d21b878decc6461 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Sat, 17 Mar 2012 09:17:49 +0000 Subject: drivers/base: fix compiler warning in SoC export driver - idr should be ida MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes: note: expected ‘struct ida *’ but argument is of type ‘struct idr *’ warning: passing argument 1 of ‘ida_pre_get’ from incompatible pointer type Reported-by: Arnd Bergman Cc: Greg Kroah-Hartman Signed-off-by: Lee Jones Signed-off-by: Axel Lin Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/base/soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/soc.c b/drivers/base/soc.c index f49346b9e96..ba29b2e73d4 100644 --- a/drivers/base/soc.c +++ b/drivers/base/soc.c @@ -15,7 +15,7 @@ #include #include -static DEFINE_IDR(soc_ida); +static DEFINE_IDA(soc_ida); static DEFINE_SPINLOCK(soc_lock); static ssize_t soc_info_get(struct device *dev, -- cgit v1.2.3-70-g09d2 From ce5c9851855bab190c9a142761d54ba583ab094c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 23 Mar 2012 15:23:18 +0100 Subject: USB: pl2303: fix DTR/RTS being raised on baud rate change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DTR/RTS should only be raised when changing baudrate from B0 and not on any baud rate change (> B0). Reported-by: Søren Holm Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index ff4a174fa5d..a1a9062954c 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty, control = priv->line_control; if ((cflag & CBAUD) == B0) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); - else + else if ((old_termios->c_cflag & CBAUD) == B0) priv->line_control |= (CONTROL_DTR | CONTROL_RTS); if (control != priv->line_control) { control = priv->line_control; -- cgit v1.2.3-70-g09d2 From 9ac2feb22b5b821d81463bef92698ef7682a3145 Mon Sep 17 00:00:00 2001 From: Santiago Garcia Mantinan Date: Mon, 19 Mar 2012 18:17:00 +0100 Subject: USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Signed-off-by: Santiago Garcia Mantinan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 836cfa9a515..f4465ccddc3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) }, -- cgit v1.2.3-70-g09d2 From 3a450850e2bb0f92cacb12da90fe98eccd105468 Mon Sep 17 00:00:00 2001 From: Aleksey Babahin Date: Tue, 20 Mar 2012 00:46:31 +0400 Subject: USB: serial: metro-usb: Fix idProduct for Uni-Directional mode. The right idProduct for Metrologic Bar Code Scanner in Uni-Directional Serial Emulation mode is 0x0700. Also rename idProduct for Bi-Directional mode to be a bit more informative. Signed-off-by: Aleksey Babahin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/metro-usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 6e1622f2a29..08d16e8c002 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -27,8 +27,8 @@ /* Product information. */ #define FOCUS_VENDOR_ID 0x0C2E -#define FOCUS_PRODUCT_ID 0x0720 -#define FOCUS_PRODUCT_ID_UNI 0x0710 +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 #define METROUSB_SET_REQUEST_TYPE 0x40 #define METROUSB_SET_MODEM_CTRL_REQUEST 10 @@ -47,7 +47,7 @@ struct metrousb_private { /* Device table list. */ static struct usb_device_id id_table[] = { - { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, { }, /* Terminating entry. */ }; -- cgit v1.2.3-70-g09d2 From 891a3b1fddb24b4b53426685bd0390bb74c9b5b3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 16:10:49 -0400 Subject: USB: fix bug in serial driver unregistration This patch (as1536) fixes a bug in the USB serial core. Unloading and reloading a serial driver while a serial device is plugged in causes errors because of the code in usb_serial_disconnect() that tries to make sure the port_remove method is called. With the new order of driver registration introduced in the 3.4 kernel, this is definitely not the right thing to do (if indeed it ever was). The patch removes that whole section code, along with the mechanism for keeping track of each port's registration state, which is no longer needed. The driver core can handle all that stuff for us. Note: This has been tested only with one or two USB serial drivers. In theory, other drivers might still run into trouble. But if they do, it will be the fault of the drivers, not of this patch -- that is, the drivers will need to be fixed. Signed-off-by: Alan Stern Reported-and-tested-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/bus.c | 5 ----- drivers/usb/serial/usb-serial.c | 23 ++--------------------- include/linux/usb/serial.h | 8 -------- 3 files changed, 2 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 7f547dc3a59..ed8adb052ca 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev) retval = -ENODEV; goto exit; } - if (port->dev_state != PORT_REGISTERING) - goto exit; driver = port->serial->type; if (driver->port_probe) { @@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev) if (!port) return -ENODEV; - if (port->dev_state != PORT_UNREGISTERING) - return retval; - device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 69230f01056..5413bd50078 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1070,17 +1070,12 @@ int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); - port->dev_state = PORT_REGISTERING; device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); - if (retval) { + if (retval) dev_err(&port->dev, "Error registering port device, " "continuing\n"); - port->dev_state = PORT_UNREGISTERED; - } else { - port->dev_state = PORT_REGISTERED; - } } usb_serial_console_init(debug, minor); @@ -1124,22 +1119,8 @@ void usb_serial_disconnect(struct usb_interface *interface) } kill_traffic(port); cancel_work_sync(&port->work); - if (port->dev_state == PORT_REGISTERED) { - - /* Make sure the port is bound so that the - * driver's port_remove method is called. - */ - if (!port->dev.driver) { - int rc; - - port->dev.driver = - &serial->type->driver; - rc = device_bind_driver(&port->dev); - } - port->dev_state = PORT_UNREGISTERING; + if (device_is_registered(&port->dev)) device_del(&port->dev); - port->dev_state = PORT_UNREGISTERED; - } } } serial->type->disconnect(serial); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index fbb666b1b67..47428388823 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -28,13 +28,6 @@ /* parity check flag */ #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) -enum port_dev_state { - PORT_UNREGISTERED, - PORT_REGISTERING, - PORT_REGISTERED, - PORT_UNREGISTERING, -}; - /* USB serial flags */ #define USB_SERIAL_WRITE_BUSY 0 @@ -124,7 +117,6 @@ struct usb_serial_port { char throttle_req; unsigned long sysrq; /* sysrq timeout */ struct device dev; - enum port_dev_state dev_state; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) -- cgit v1.2.3-70-g09d2 From cd4376e23a59a2adf3084cb5f4a523e6d5fd4e49 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 28 Mar 2012 15:56:17 -0400 Subject: USB: don't ignore suspend errors for root hubs This patch (as1532) fixes a mistake in the USB suspend code. When the system is going to sleep, we should ignore errors in powering down USB devices, because they don't really matter. The devices will go to low power anyway when the entire USB bus gets suspended (except for SuperSpeed devices; maybe they will need special treatment later). However we should not ignore errors in suspending root hubs, especially if the error indicates that the suspend raced with a wakeup request. Doing so might leave the bus powered on while the system was supposed to be asleep, or it might cause the suspend of the root hub's parent controller device to fail, or it might cause a wakeup request to be ignored. The patch fixes the problem by ignoring errors only when the device in question is not a root hub. Signed-off-by: Alan Stern Reported-by: Chen Peter CC: Tested-by: Chen Peter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index f8e2d6d52e5..9a56635dc19 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status == 0) { status = usb_suspend_device(udev, msg); - /* Again, ignore errors during system sleep transitions */ - if (!PMSG_IS_AUTO(msg)) + /* + * Ignore errors from non-root-hub devices during + * system sleep transitions. For the most part, + * these devices should go to low power anyway when + * the entire bus is suspended. + */ + if (udev->parent && !PMSG_IS_AUTO(msg)) status = 0; } -- cgit v1.2.3-70-g09d2 From fca5430d48d53eaf103498c33fd0d1984b9f448b Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 26 Mar 2012 21:19:40 +0100 Subject: USB: ftdi_sio: fix status line change handling for TIOCMIWAIT and TIOCGICOUNT Handling of TIOCMIWAIT was changed by commit 1d749f9afa657f6ee9336b2bc1fcd750a647d157 USB: ftdi_sio.c: Use ftdi async_icount structure for TIOCMIWAIT, as in other drivers FTDI_STATUS_B0_MASK does not indicate the changed modem status lines, it indicates the value of the current modem status lines. An xor is still required to determine which lines have changed. The count was only being incremented if the line was high. The only reason TIOCMIWAIT still worked was because the status packet is repeated every 1ms, so the count was always changing. The wakeup itself still ran based on the status lines changing. This change fixes handling of updates to the modem status lines and allows multiple processes to use TIOCMIWAIT concurrently. Tested with two processes waiting on different status lines being toggled independently. Signed-off-by: Simon Arlott Cc: Uwe Bonnes Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ff8605b4b4b..c02e4602d90 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -75,7 +75,7 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ - char prev_status, diff_status; /* Used for TIOCMIWAIT */ + char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -1982,17 +1982,19 @@ static int ftdi_process_packet(struct tty_struct *tty, N.B. packet may be processed more than once, but differences are only processed once. */ status = packet[0] & FTDI_STATUS_B0_MASK; - if (status & FTDI_RS0_CTS) - priv->icount.cts++; - if (status & FTDI_RS0_DSR) - priv->icount.dsr++; - if (status & FTDI_RS0_RI) - priv->icount.rng++; - if (status & FTDI_RS0_RLSD) - priv->icount.dcd++; if (status != priv->prev_status) { - priv->diff_status |= status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); + char diff_status = status ^ priv->prev_status; + + if (diff_status & FTDI_RS0_CTS) + priv->icount.cts++; + if (diff_status & FTDI_RS0_DSR) + priv->icount.dsr++; + if (diff_status & FTDI_RS0_RI) + priv->icount.rng++; + if (diff_status & FTDI_RS0_RLSD) + priv->icount.dcd++; + + wake_up_interruptible_all(&priv->delta_msr_wait); priv->prev_status = status; } -- cgit v1.2.3-70-g09d2 From 876ae50d94b02f3f523aa451b45ec5fb9c25d221 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Mon, 26 Mar 2012 23:27:59 +0100 Subject: USB: ftdi_sio: fix race condition in TIOCMIWAIT, and abort of TIOCMIWAIT when the device is removed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are two issues here, one is that the device is generating spurious very fast modem status line changes somewhere: CTS becomes high then low 18µs later: [121226.924373] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=6 [121226.924378] ftdi_process_packet: status=10 prev=00 diff=10 [121226.924382] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=7 (wake_up_interruptible is called) [121226.924391] ftdi_process_packet: prev rng=0 dsr=10 dcd=0 cts=7 [121226.924394] ftdi_process_packet: status=00 prev=10 diff=10 [121226.924397] ftdi_process_packet: now rng=0 dsr=10 dcd=0 cts=8 (wake_up_interruptible is called) This wakes up the task in TIOCMIWAIT: [121226.924405] ftdi_ioctl: 19451 rng=0->0 dsr=10->10 dcd=0->0 cts=6->8 (wait from 20:51:46 returns and observes both changes) Which then calls TIOCMIWAIT again: 20:51:46.400239 ioctl(3, TIOCMIWAIT, 0x20) = 0 22:11:09.441818 ioctl(3, TIOCMGET, [TIOCM_DTR|TIOCM_RTS]) = 0 22:11:09.442812 ioctl(3, TIOCMIWAIT, 0x20) = -1 EIO (Input/output error) (the second wake_up_interruptible takes effect and an I/O error occurs) The other issue is that TIOCMIWAIT will wait forever (unless the task is interrupted) if the device is removed. This change removes the -EIO return that occurs if the counts don't appear to have changed. Multiple counts may have been processed as one or the waiting task may have started waiting after recording the current count. It adds a bool to indicate that the device has been removed so that TIOCMIWAIT doesn't wait forever, and wakes up any tasks so that they can return -EIO. Signed-off-by: Simon Arlott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c02e4602d90..02e7f2d32d5 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -76,6 +76,7 @@ struct ftdi_private { struct async_icount icount; wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ char prev_status; /* Used for TIOCMIWAIT */ + bool dev_gone; /* Used to abort TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ struct usb_serial_port *port; __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) init_waitqueue_head(&priv->delta_msr_wait); priv->flags = ASYNC_LOW_LATENCY; + priv->dev_gone = false; if (quirk && quirk->port_probe) quirk->port_probe(priv); @@ -1839,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) dbg("%s", __func__); + priv->dev_gone = true; + wake_up_interruptible_all(&priv->delta_msr_wait); + remove_sysfs_attrs(port); kref_put(&priv->kref, ftdi_sio_priv_release); @@ -2397,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty, */ case TIOCMIWAIT: cprev = priv->icount; - while (1) { + while (!priv->dev_gone) { interruptible_sleep_on(&priv->delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; cnow = priv->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || @@ -2414,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty, } cprev = cnow; } - /* not reached */ + return -EIO; break; case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); -- cgit v1.2.3-70-g09d2 From c5d703dcc776cb542b41665f2b7e2ba054efb4a7 Mon Sep 17 00:00:00 2001 From: Anton Samokhvalov Date: Wed, 4 Apr 2012 22:26:01 +0400 Subject: USB: sierra: add support for Sierra Wireless MC7710 Just add new device id. 3G works fine, LTE not tested. Signed-off-by: Anton Samokhvalov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index f14465a83dd..fdd5aa2c8d8 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ + { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */ /* Sierra Wireless C885 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ -- cgit v1.2.3-70-g09d2 From 879d38e6bc36d73b0ac40ec9b0d839fda9fa8b1a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:18 -0400 Subject: USB: fix race between root-hub suspend and remote wakeup This patch (as1533) fixes a race between root-hub suspend and remote wakeup. If a wakeup event occurs while a root hub is suspending, it might not cause the suspend to fail. Although the host controller drivers check for pending wakeup events at the start of their bus_suspend routines, they generally do not check for wakeup events while the routines are running. In addition, if a wakeup event occurs any time after khubd is frozen and before the root hub is fully suspended, it might not cause a system sleep transition to fail. For example, the host controller drivers do not fail root-hub suspends when a connect-change event is pending. To fix both these issues, this patch causes hcd_bus_suspend() to query the controller driver's hub_status_data method after a root hub is suspended, if the root hub is enabled for wakeup. Any pending status changes will count as wakeup events, causing the root hub to be resumed and the overall suspend to fail with -EBUSY. A significant point is that not all events are reflected immediately in the status bits. Both EHCI and UHCI controllers notify the CPU when remote wakeup begins on a port, but the port's suspend-change status bit doesn't get set until after the port has completed the transition out of the suspend state, some 25 milliseconds later. Consequently, the patch will interpret any nonzero return value from hub_status_data as indicating a pending event, even if none of the status bits are set in the data buffer. Follow-up patches make the necessary changes to ehci-hcd and uhci-hcd. Signed-off-by: Alan Stern CC: Sarah Sharp CC: Chen Peter-B29397 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9d7fc9a3993..140d3e11f21 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) if (status == 0) { usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; + + /* Did we race with a root-hub wakeup event? */ + if (rhdev->do_remote_wakeup) { + char buffer[6]; + + status = hcd->driver->hub_status_data(hcd, buffer); + if (status != 0) { + dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n"); + hcd_bus_resume(rhdev, PMSG_AUTO_RESUME); + status = -EBUSY; + } + } } else { spin_lock_irq(&hcd_root_hub_lock); if (!HCD_DEAD(hcd)) { -- cgit v1.2.3-70-g09d2 From a448e4dc25303fe551e4dafe16c8c7c34f1b9d82 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:30 -0400 Subject: EHCI: keep track of ports being resumed and indicate in hub_status_data This patch (as1537) adds a bit-array to ehci-hcd for keeping track of which ports are undergoing a resume transition. If any of the bits are set when ehci_hub_status_data() is called, the routine will return a nonzero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern CC: Sarah Sharp CC: Chen Peter-B29397 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 3 +++ drivers/usb/host/ehci-hub.c | 31 ++++++++++++++++--------------- drivers/usb/host/ehci-tegra.c | 2 ++ drivers/usb/host/ehci.h | 2 ++ 4 files changed, 23 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 057cdda7a48..806cc95317a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->debug) dbgp_external_startup(); + ehci->port_c_suspend = ehci->suspended_ports = + ehci->resuming_ports = 0; return retval; } @@ -939,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) * like usb_port_resume() does. */ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 256fbd42e48..38fe0762315 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) * remote wakeup, we must fail the suspend. */ if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_N_PORTS(ehci->hcs_params); - while (port--) { - if (ehci->reset_done[port] != 0) { - spin_unlock_irq(&ehci->lock); - ehci_dbg(ehci, "suspend failed because " - "port %d is resuming\n", - port + 1); - return -EBUSY; - } + if (ehci->resuming_ports) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because a port is resuming\n"); + return -EBUSY; } } @@ -554,16 +549,12 @@ static int ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp, status = 0; + u32 temp, status; u32 mask; int ports, i, retval = 1; unsigned long flags; u32 ppcd = 0; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (ehci->rh_state != EHCI_RH_RUNNING) - return 0; - /* init status to no-changes */ buf [0] = 0; ports = HCS_N_PORTS (ehci->hcs_params); @@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Inform the core about resumes-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = ehci->resuming_ports; + /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It * may be relevant that VIA VT8235 controllers, where PORT_POWER is @@ -846,6 +842,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESUME), status_reg); + clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { @@ -864,6 +861,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex])) { status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); /* force reset to complete */ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET), @@ -884,8 +882,10 @@ static int ehci_hub_control ( ehci_readl(ehci, status_reg)); } - if (!(temp & (PORT_RESUME|PORT_RESET))) + if (!(temp & (PORT_RESUME|PORT_RESET))) { ehci->reset_done[wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); + } /* transfer dedicated ports to the companion hc */ if ((temp & PORT_CONNECT) && @@ -920,6 +920,7 @@ static int ehci_hub_control ( status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); + clear_bit(wIndex, &ehci->resuming_ports); ehci->reset_done[wIndex] = 0; if (temp & PORT_PE) set_bit(wIndex, &ehci->port_c_suspend); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3de48a2d795..73544bd440b 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -224,6 +224,7 @@ static int tegra_ehci_hub_control( temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); /* start resume signalling */ ehci_writel(ehci, temp | PORT_RESUME, status_reg); + set_bit(wIndex-1, &ehci->resuming_ports); spin_unlock_irqrestore(&ehci->lock, flags); msleep(20); @@ -236,6 +237,7 @@ static int tegra_ehci_hub_control( pr_err("%s: timeout waiting for SUSPEND\n", __func__); ehci->reset_done[wIndex-1] = 0; + clear_bit(wIndex-1, &ehci->resuming_ports); tegra->port_resuming = 1; goto done; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 8f9acbc96fd..2694ed6558d 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -117,6 +117,8 @@ struct ehci_hcd { /* one per controller */ the change-suspend feature turned on */ unsigned long suspended_ports; /* which ports are suspended */ + unsigned long resuming_ports; /* which ports have + started to resume */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ -- cgit v1.2.3-70-g09d2 From b446b96fd11b69b7c4ecd47d869cff9094fd8802 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 3 Apr 2012 15:24:43 -0400 Subject: UHCI: hub_status_data should indicate if ports are resuming This patch (as1538) causes uhci_hub_status_data() to return a nonzero value when any port is undergoing a resume transition while the root hub is suspended. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-hub.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 045cde4cbc3..768d54295a2 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { - case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status || uhci->resuming_ports) + if (status || uhci->resuming_ports) { + status = 1; usb_hcd_resume_root_hub(hcd); + } break; case UHCI_RH_AUTO_STOPPED: -- cgit v1.2.3-70-g09d2 From 83dbbdbb38666e20a75fad2294cf1df77c52f121 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 9 Apr 2012 16:56:18 -0700 Subject: android, lowmemorykiller: remove task handoff notifier The task handoff notifier leaks task_struct since it never gets freed after the callback returns NOTIFY_OK, which means it is responsible for doing so. It turns out the lowmemorykiller actually doesn't need this notifier at all. It's used to prevent unnecessary killing by waiting for a thread to exit as a result of lowmem_shrink(), however, it's possible to do this in the same way the kernel oom killer works by setting TIF_MEMDIE and avoid killing if we're still waiting for it to exit. The kernel oom killer will already automatically set TIF_MEMDIE for threads that are attempting to allocate memory that have a fatal signal. The thread selected by lowmem_shrink() will have such a signal after the lowmemorykiller sends it a SIGKILL, so this won't result in an unnecessary use of memory reserves for the thread to exit. This has the added benefit that we don't have to rely on CONFIG_PROFILING to prevent needlessly killing tasks. Reported-by: Werner Landgraf Cc: stable@vger.kernel.org Signed-off-by: David Rientjes Acked-by: Colin Cross Signed-off-by: Linus Torvalds --- drivers/staging/android/lowmemorykiller.c | 48 +++++-------------------------- 1 file changed, 7 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c index 052b43e4e50..b91e4bc332a 100644 --- a/drivers/staging/android/lowmemorykiller.c +++ b/drivers/staging/android/lowmemorykiller.c @@ -55,7 +55,6 @@ static int lowmem_minfree[6] = { }; static int lowmem_minfree_size = 4; -static struct task_struct *lowmem_deathpending; static unsigned long lowmem_deathpending_timeout; #define lowmem_print(level, x...) \ @@ -64,24 +63,6 @@ static unsigned long lowmem_deathpending_timeout; printk(x); \ } while (0) -static int -task_notify_func(struct notifier_block *self, unsigned long val, void *data); - -static struct notifier_block task_nb = { - .notifier_call = task_notify_func, -}; - -static int -task_notify_func(struct notifier_block *self, unsigned long val, void *data) -{ - struct task_struct *task = data; - - if (task == lowmem_deathpending) - lowmem_deathpending = NULL; - - return NOTIFY_OK; -} - static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) { struct task_struct *tsk; @@ -97,19 +78,6 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) int other_file = global_page_state(NR_FILE_PAGES) - global_page_state(NR_SHMEM); - /* - * If we already have a death outstanding, then - * bail out right away; indicating to vmscan - * that we have nothing further to offer on - * this pass. - * - * Note: Currently you need CONFIG_PROFILING - * for this to work correctly. - */ - if (lowmem_deathpending && - time_before_eq(jiffies, lowmem_deathpending_timeout)) - return 0; - if (lowmem_adj_size < array_size) array_size = lowmem_adj_size; if (lowmem_minfree_size < array_size) @@ -148,6 +116,12 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) if (!p) continue; + if (test_tsk_thread_flag(p, TIF_MEMDIE) && + time_before_eq(jiffies, lowmem_deathpending_timeout)) { + task_unlock(p); + rcu_read_unlock(); + return 0; + } oom_score_adj = p->signal->oom_score_adj; if (oom_score_adj < min_score_adj) { task_unlock(p); @@ -174,15 +148,9 @@ static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc) lowmem_print(1, "send sigkill to %d (%s), adj %d, size %d\n", selected->pid, selected->comm, selected_oom_score_adj, selected_tasksize); - /* - * If CONFIG_PROFILING is off, then we don't want to stall - * the killer by setting lowmem_deathpending. - */ -#ifdef CONFIG_PROFILING - lowmem_deathpending = selected; lowmem_deathpending_timeout = jiffies + HZ; -#endif send_sig(SIGKILL, selected, 0); + set_tsk_thread_flag(selected, TIF_MEMDIE); rem -= selected_tasksize; } lowmem_print(4, "lowmem_shrink %lu, %x, return %d\n", @@ -198,7 +166,6 @@ static struct shrinker lowmem_shrinker = { static int __init lowmem_init(void) { - task_handoff_register(&task_nb); register_shrinker(&lowmem_shrinker); return 0; } @@ -206,7 +173,6 @@ static int __init lowmem_init(void) static void __exit lowmem_exit(void) { unregister_shrinker(&lowmem_shrinker); - task_handoff_unregister(&task_nb); } module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR); -- cgit v1.2.3-70-g09d2 From a67ada7a7239b78250c1594b0e02ca68eae848dc Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 10 Apr 2012 00:29:12 -0700 Subject: Input: elantech - reset touchpad before configuring it Acer VH40 has a Fn key toggling the touchpad on and off, but it's implemented in system firmware, and the EC chip has to receive reset command to activate this function. Also when this machine wakes up after resume, psmouse_reset is necessary to bring the touchpad back on. Signed-off-by: JJ Ding Reviewed-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index d2c0db159b1..21c68a8953d 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1245,6 +1245,8 @@ static void elantech_disconnect(struct psmouse *psmouse) */ static int elantech_reconnect(struct psmouse *psmouse) { + psmouse_reset(psmouse); + if (elantech_detect(psmouse, 0)) return -1; @@ -1324,6 +1326,8 @@ int elantech_init(struct psmouse *psmouse) if (!etd) return -ENOMEM; + psmouse_reset(psmouse); + etd->parity[0] = 1; for (i = 1; i < 256; i++) etd->parity[i] = etd->parity[i & (i - 1)] ^ 1; -- cgit v1.2.3-70-g09d2 From e3dde4fba94e0ba5e1fd79ea9e5389eea1f0cfec Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 10 Apr 2012 00:30:12 -0700 Subject: Input: elantech - v4 is a clickpad, with only one button Add pointer and buttonpad properties for v4 hardware. Also, Jachiet reported that on Asus UX31, right button has no effect. It turns out v4 has only one button, the right-button effect is implemented with software when Windows driver is installed, or in firmware when touchpad is in relative mode. So remove BTN_RIGHT while at it. Reported-by: Jachiet Louis Signed-off-by: JJ Ding Reviewed-by: Chase Douglas Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 21c68a8953d..479011004a1 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -486,7 +486,6 @@ static void elantech_input_sync_v4(struct psmouse *psmouse) unsigned char *packet = psmouse->packet; input_report_key(dev, BTN_LEFT, packet[0] & 0x01); - input_report_key(dev, BTN_RIGHT, packet[0] & 0x02); input_mt_report_pointer_emulation(dev, true); input_sync(dev); } @@ -967,6 +966,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) return -1; + __set_bit(INPUT_PROP_POINTER, dev->propbit); __set_bit(EV_KEY, dev->evbit); __set_bit(EV_ABS, dev->evbit); __clear_bit(EV_REL, dev->evbit); @@ -1017,7 +1017,9 @@ static int elantech_set_input_params(struct psmouse *psmouse) */ psmouse_warn(psmouse, "couldn't query resolution data.\n"); } - + /* v4 is clickpad, with only one button. */ + __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); + __clear_bit(BTN_RIGHT, dev->keybit); __set_bit(BTN_TOOL_QUADTAP, dev->keybit); /* For X to recognize me as touchpad. */ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); -- cgit v1.2.3-70-g09d2 From fb16395ee65d22882a0af30850cbf5c9b9a2962c Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 10 Apr 2012 00:25:01 -0700 Subject: Input: trackpoint - use psmouse_fmt() for messages Use psmouse_*() macros introduced in commit b5d21704361ee. Signed-off-by: JJ Ding Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/trackpoint.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 22b21801813..f3102494237 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -304,7 +304,7 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) return 0; if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) { - printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n"); + psmouse_warn(psmouse, "failed to get extended button data\n"); button_info = 0; } @@ -326,16 +326,18 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties) error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group); if (error) { - printk(KERN_ERR - "trackpoint.c: failed to create sysfs attributes, error: %d\n", - error); + psmouse_err(psmouse, + "failed to create sysfs attributes, error: %d\n", + error); kfree(psmouse->private); psmouse->private = NULL; return -1; } - printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", - firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f); + psmouse_info(psmouse, + "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n", + firmware_id, + (button_info & 0xf0) >> 4, button_info & 0x0f); return 0; } -- cgit v1.2.3-70-g09d2 From 4de833c337509916b7931982734d858191cf0700 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 5 Apr 2012 12:58:22 -0600 Subject: drm/radeon: replace udelay with mdelay for long timeouts Some architectures require that delays longer than a few miliseconds are called through mdelay. This was triggered on ARM randconfig builds. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/r600.c | 2 +- drivers/gpu/drm/radeon/r600_cp.c | 6 +++--- drivers/gpu/drm/radeon/radeon_clocks.c | 24 ++++++++++++------------ drivers/gpu/drm/radeon/radeon_combios.c | 8 ++++---- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 12 ++++++------ 6 files changed, 27 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 81801c176aa..fe33d35dae8 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2553,7 +2553,7 @@ static void r100_pll_errata_after_data(struct radeon_device *rdev) * or the chip could hang on a subsequent access */ if (rdev->pll_errata & CHIP_ERRATA_PLL_DELAY) { - udelay(5000); + mdelay(5); } /* This function is required to workaround a hardware bug in some (all?) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 391bd2636a8..de71243b591 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2839,7 +2839,7 @@ void r600_rlc_stop(struct radeon_device *rdev) /* r7xx asics need to soft reset RLC before halting */ WREG32(SRBM_SOFT_RESET, SOFT_RESET_RLC); RREG32(SRBM_SOFT_RESET); - udelay(15000); + mdelay(15); WREG32(SRBM_SOFT_RESET, 0); RREG32(SRBM_SOFT_RESET); } diff --git a/drivers/gpu/drm/radeon/r600_cp.c b/drivers/gpu/drm/radeon/r600_cp.c index 84c54625095..75ed17c9611 100644 --- a/drivers/gpu/drm/radeon/r600_cp.c +++ b/drivers/gpu/drm/radeon/r600_cp.c @@ -407,7 +407,7 @@ static void r600_cp_load_microcode(drm_radeon_private_t *dev_priv) RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); fw_data = (const __be32 *)dev_priv->me_fw->data; @@ -500,7 +500,7 @@ static void r700_cp_load_microcode(drm_radeon_private_t *dev_priv) RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); fw_data = (const __be32 *)dev_priv->pfp_fw->data; @@ -1797,7 +1797,7 @@ static void r600_cp_init_ring_buffer(struct drm_device *dev, RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP); RADEON_READ(R600_GRBM_SOFT_RESET); - DRM_UDELAY(15000); + mdelay(15); RADEON_WRITE(R600_GRBM_SOFT_RESET, 0); diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index 6ae0c75f016..9c6b29a4192 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -633,7 +633,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp &= ~(R300_SCLK_FORCE_VAP); tmp |= RADEON_SCLK_FORCE_CP; WREG32_PLL(RADEON_SCLK_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(R300_SCLK_CNTL2); tmp &= ~(R300_SCLK_FORCE_TCL | @@ -651,12 +651,12 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= (RADEON_ENGIN_DYNCLK_MODE | (0x01 << RADEON_ACTIVE_HILO_LAT_SHIFT)); WREG32_PLL(RADEON_CLK_PWRMGT_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL); tmp |= RADEON_SCLK_DYN_START_CNTL; WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp); - udelay(15000); + mdelay(15); /* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200 to lockup randomly, leave them as set by BIOS. @@ -696,7 +696,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= RADEON_SCLK_MORE_FORCEON; } WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp); - udelay(15000); + mdelay(15); } /* RV200::A11 A12, RV250::A11 A12 */ @@ -709,7 +709,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp |= RADEON_TCL_BYPASS_DISABLE; WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp); } - udelay(15000); + mdelay(15); /*enable dynamic mode for display clocks (PIXCLK and PIX2CLK) */ tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL); @@ -722,14 +722,14 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) RADEON_PIXCLK_TMDS_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - udelay(15000); + mdelay(15); tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL); tmp |= (RADEON_PIXCLK_ALWAYS_ONb | RADEON_PIXCLK_DAC_ALWAYS_ONb); WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp); - udelay(15000); + mdelay(15); } } else { /* Turn everything OFF (ForceON to everything) */ @@ -861,7 +861,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) } WREG32_PLL(RADEON_SCLK_CNTL, tmp); - udelay(16000); + mdelay(16); if ((rdev->family == CHIP_R300) || (rdev->family == CHIP_R350)) { @@ -870,7 +870,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) R300_SCLK_FORCE_GA | R300_SCLK_FORCE_CBA); WREG32_PLL(R300_SCLK_CNTL2, tmp); - udelay(16000); + mdelay(16); } if (rdev->flags & RADEON_IS_IGP) { @@ -878,7 +878,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp &= ~(RADEON_FORCEON_MCLKA | RADEON_FORCEON_YCLKA); WREG32_PLL(RADEON_MCLK_CNTL, tmp); - udelay(16000); + mdelay(16); } if ((rdev->family == CHIP_RV200) || @@ -887,7 +887,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL); tmp |= RADEON_SCLK_MORE_FORCEON; WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp); - udelay(16000); + mdelay(16); } tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL); @@ -900,7 +900,7 @@ void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable) RADEON_PIXCLK_TMDS_ALWAYS_ONb); WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp); - udelay(16000); + mdelay(16); tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL); tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb | diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 81fc100be7e..2cad9fde92f 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -2845,7 +2845,7 @@ bool radeon_combios_external_tmds_setup(struct drm_encoder *encoder) case 4: val = RBIOS16(index); index += 2; - udelay(val * 1000); + mdelay(val); break; case 6: slave_addr = id & 0xff; @@ -3044,7 +3044,7 @@ static void combios_parse_pll_table(struct drm_device *dev, uint16_t offset) udelay(150); break; case 2: - udelay(1000); + mdelay(1); break; case 3: while (tmp--) { @@ -3075,13 +3075,13 @@ static void combios_parse_pll_table(struct drm_device *dev, uint16_t offset) /*mclk_cntl |= 0x00001111;*//* ??? */ WREG32_PLL(RADEON_MCLK_CNTL, mclk_cntl); - udelay(10000); + mdelay(10); #endif WREG32_PLL (RADEON_CLK_PWRMGT_CNTL, tmp & ~RADEON_CG_NO1_DEBUG_0); - udelay(10000); + mdelay(10); } break; default: diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 2f46e0c8df5..42db254f6bb 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -88,7 +88,7 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL); lvds_pll_cntl |= RADEON_LVDS_PLL_EN; WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl); - udelay(1000); + mdelay(1); lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL); lvds_pll_cntl &= ~RADEON_LVDS_PLL_RESET; @@ -101,7 +101,7 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) (backlight_level << RADEON_LVDS_BL_MOD_LEVEL_SHIFT)); if (is_mac) lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN; - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); break; case DRM_MODE_DPMS_STANDBY: @@ -118,10 +118,10 @@ static void radeon_legacy_lvds_update(struct drm_encoder *encoder, int mode) WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON); } - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl); WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl); - udelay(panel_pwr_delay * 1000); + mdelay(panel_pwr_delay); break; } @@ -656,7 +656,7 @@ static enum drm_connector_status radeon_legacy_primary_dac_detect(struct drm_enc WREG32(RADEON_DAC_MACRO_CNTL, tmp); - udelay(2000); + mdelay(2); if (RREG32(RADEON_DAC_CNTL) & RADEON_DAC_CMP_OUTPUT) found = connector_status_connected; @@ -1499,7 +1499,7 @@ static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder tmp = dac_cntl2 | RADEON_DAC2_DAC2_CLK_SEL | RADEON_DAC2_CMP_EN; WREG32(RADEON_DAC_CNTL2, tmp); - udelay(10000); + mdelay(10); if (ASIC_IS_R300(rdev)) { if (RREG32(RADEON_DAC_CNTL2) & RADEON_DAC2_CMP_OUT_B) -- cgit v1.2.3-70-g09d2 From 6d258a4c42089229b855fd706622029decf316d6 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 15 Mar 2012 16:37:18 +0200 Subject: usb: gadget: udc-core: stop UDC on device-initiated disconnect When we want to do device-initiated disconnect, let's make sure we stop the UDC in order to e.g. allow lower power states to be achieved by turning off unnecessary clocks and/or stoping PHYs. When reconnecting, call ->udc_start() again to make sure UDC is reinitialized. Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 56da49f31d6..c261887e05a 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -411,8 +411,12 @@ static ssize_t usb_udc_softconn_store(struct device *dev, struct usb_udc *udc = container_of(dev, struct usb_udc, dev); if (sysfs_streq(buf, "connect")) { + if (udc_is_newstyle(udc)) + usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + if (udc_is_newstyle(udc)) + usb_gadget_udc_stop(udc->gadget, udc->driver); usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); -- cgit v1.2.3-70-g09d2 From 566ccdda07dc5898272b6fbad9c616fc44be305a Mon Sep 17 00:00:00 2001 From: Moiz Sonasath Date: Wed, 14 Mar 2012 00:44:56 -0500 Subject: usb: dwc3: ep0: Handle requests greater than wMaxPacketSize To allow ep0 out transfers of upto bounce buffer size instead of maxpacketsize, use the transfer size as multiple of ep0 maxpacket size. Cc: stable@vger.kernel.org Signed-off-by: Moiz Sonasath Signed-off-by: Partha Basak Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 25910e251c0..a40d3bb0f1c 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -559,8 +559,12 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, length = trb->size & DWC3_TRB_SIZE_MASK; if (dwc->ep0_bounced) { + unsigned transfer_size = ur->length; + unsigned maxp = ep0->endpoint.maxpacket; + + transfer_size += (maxp - (transfer_size % maxp)); transferred = min_t(u32, ur->length, - ep0->endpoint.maxpacket - length); + transfer_size - length); memcpy(ur->buf, dwc->ep0_bounce, transferred); dwc->ep0_bounced = false; } else { -- cgit v1.2.3-70-g09d2 From cd423dd3634a5232a3019eb372b144619a61cd16 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 21 Mar 2012 11:44:00 +0200 Subject: usb: dwc3: ep0: increment "actual" on bounced ep0 case due to a HW limitation we have a bounce buffer for ep0 out transfers which are not aligned with MaxPacketSize. On such case we were not increment r->actual as we should. This patch fixes that mistake. Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index a40d3bb0f1c..da43131be0e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -569,9 +569,10 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, dwc->ep0_bounced = false; } else { transferred = ur->length - length; - ur->actual += transferred; } + ur->actual += transferred; + if ((epnum & 1) && ur->actual < ur->length) { /* for some reason we did not get everything out */ -- cgit v1.2.3-70-g09d2 From 6587eb82617f7913c13e750e73e13fa9c829863c Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 6 Apr 2012 17:38:24 -0400 Subject: drm/savage: fix integer overflows in savage_bci_cmdbuf() Since cmdbuf->size and cmdbuf->nbox are from userspace, a large value would overflow the allocation size, leading to out-of-bounds access. Signed-off-by: Xi Wang Signed-off-by: Dave Airlie --- drivers/gpu/drm/savage/savage_state.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/savage/savage_state.c b/drivers/gpu/drm/savage/savage_state.c index 031aaaf79ac..b6d8608375c 100644 --- a/drivers/gpu/drm/savage/savage_state.c +++ b/drivers/gpu/drm/savage/savage_state.c @@ -988,7 +988,7 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_ * for locking on FreeBSD. */ if (cmdbuf->size) { - kcmd_addr = kmalloc(cmdbuf->size * 8, GFP_KERNEL); + kcmd_addr = kmalloc_array(cmdbuf->size, 8, GFP_KERNEL); if (kcmd_addr == NULL) return -ENOMEM; @@ -1015,8 +1015,8 @@ int savage_bci_cmdbuf(struct drm_device *dev, void *data, struct drm_file *file_ cmdbuf->vb_addr = kvb_addr; } if (cmdbuf->nbox) { - kbox_addr = kmalloc(cmdbuf->nbox * sizeof(struct drm_clip_rect), - GFP_KERNEL); + kbox_addr = kmalloc_array(cmdbuf->nbox, sizeof(struct drm_clip_rect), + GFP_KERNEL); if (kbox_addr == NULL) { ret = -ENOMEM; goto done; -- cgit v1.2.3-70-g09d2 From afceb9319f21b18ee3bc15ee9a5f92e18ef8a8c9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Apr 2012 17:05:41 -0400 Subject: drm/radeon/kms: fix DVO setup on some r4xx chips Some r4xx chips have the wrong frev in the DVOEncoderControl table. It should always be 1 on r4xx. Fixes modesetting on DVO on r4xx chips with the bad frev. Reported by twied on #radeon. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_encoders.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index e607c4d7dd9..2d39f9977e0 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -230,6 +230,10 @@ atombios_dvo_setup(struct drm_encoder *encoder, int action) if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) return; + /* some R4xx chips have the wrong frev */ + if (rdev->family <= CHIP_RV410) + frev = 1; + switch (frev) { case 1: switch (crev) { -- cgit v1.2.3-70-g09d2 From 3a48d1c08fe0db79b8647b7042e6a077588b374a Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Tue, 10 Apr 2012 14:15:41 +0100 Subject: i2c: prevent spurious interrupt on Designware controllers Don't call i2c_enable on resume because it causes a spurious interrupt. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Kirill A. Shutemov Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/i2c/busses/i2c-designware-pcidrv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 37f42113af3..00e8f213f56 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -182,7 +182,6 @@ static int i2c_dw_pci_resume(struct device *dev) pci_restore_state(pdev); i2c_dw_init(i2c); - i2c_dw_enable(i2c); return 0; } -- cgit v1.2.3-70-g09d2 From 55158c886a0c43765140673d2343d3119d34a25a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 Apr 2012 09:03:03 -0700 Subject: Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.h Direct usage of the asm include has long been deprecated by the introduction of gpiolib. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/gpio_mouse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index a9ad8e1402b..39fe9b737ca 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -12,9 +12,9 @@ #include #include #include +#include #include -#include /* * Timer function which is run every scan_ms ms when the device is opened. -- cgit v1.2.3-70-g09d2 From ecb07797ffc1c2aaa2e58d1ba1b5deea44ea5b9e Mon Sep 17 00:00:00 2001 From: Gerard Cauvy Date: Fri, 16 Mar 2012 16:20:10 +0200 Subject: usb: dwc3: ep0: add a default case for SetFeature command Without this default case returning an error, thus replying with a stall, we would fail USB30CV TD 9.11 Bad Feature test case. Cc: stable@vger.kernel.org Signed-off-by: Gerard Cauvy Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index da43131be0e..3584a169886 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -353,6 +353,9 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, dwc->test_mode_nr = wIndex >> 8; dwc->test_mode = true; + break; + default: + return -EINVAL; } break; -- cgit v1.2.3-70-g09d2 From afb76df140823c57738598a876cd1d6568cd57c7 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 23 Dec 2011 18:37:18 +0200 Subject: usb: musb: fix oops on omap2430 module unload This change prevents runtime suspend and resume actual execution, if omap2430 controller driver is loaded after musb-hdrc, and therefore the controller isn't initialized properly. The problem is reproducible with 3.1.y and 3.2 kernels. Kernel configuration of musb: % cat .config | egrep 'MUSB|GADGET' CONFIG_USB_MUSB_HDRC=y # CONFIG_USB_MUSB_TUSB6010 is not set CONFIG_USB_MUSB_OMAP2PLUS=m # CONFIG_USB_MUSB_AM35X is not set CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 CONFIG_USB_GADGET_MUSB_HDRC=m CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_GADGETFS=m # CONFIG_USB_MIDI_GADGET is not set Fixes the following oops on module unloading: Unable to handle kernel NULL pointer dereference at virtual address 00000220 ----8<---- [] (omap2430_runtime_resume+0x24/0x54 [omap2430]) from [] (pm_generic_runtime_resume+0x3c/0x50) [] (pm_generic_runtime_resume+0x3c/0x50) from [] (_od_runtime_resume+0x28/0x2c) [] (_od_runtime_resume+0x28/0x2c) from [] (__rpm_callback+0x60/0xa0) [] (__rpm_callback+0x60/0xa0) from [] (rpm_resume+0x3fc/0x6e4) [] (rpm_resume+0x3fc/0x6e4) from [] (__pm_runtime_resume+0x5c/0x90) [] (__pm_runtime_resume+0x5c/0x90) from [] (__device_release_driver+0x2c/0xd0) [] (__device_release_driver+0x2c/0xd0) from [] (driver_detach+0xe8/0xf4) [] (driver_detach+0xe8/0xf4) from [] (bus_remove_driver+0xa0/0x104) [] (bus_remove_driver+0xa0/0x104) from [] (driver_unregister+0x60/0x80) [] (driver_unregister+0x60/0x80) from [] (platform_driver_unregister+0x1c/0x20) [] (platform_driver_unregister+0x1c/0x20) from [] (omap2430_exit+0x14/0x1c [omap2430]) [] (omap2430_exit+0x14/0x1c [omap2430]) from [] (sys_delete_module+0x1f4/0x264) [] (sys_delete_module+0x1f4/0x264) from [] (ret_fast_syscall+0x0/0x30) Signed-off-by: Vladimir Zapolskiy Cc: Greg Kroah-Hartman Cc: stable@vger.kernel.org # 3.1 Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2ae0bb30999..11b571ec22f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -491,11 +491,13 @@ static int omap2430_runtime_suspend(struct device *dev) struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - musb->context.otg_interfsel = musb_readl(musb->mregs, - OTG_INTERFSEL); + if (musb) { + musb->context.otg_interfsel = musb_readl(musb->mregs, + OTG_INTERFSEL); - omap2430_low_level_exit(musb); - usb_phy_set_suspend(musb->xceiv, 1); + omap2430_low_level_exit(musb); + usb_phy_set_suspend(musb->xceiv, 1); + } return 0; } @@ -505,11 +507,13 @@ static int omap2430_runtime_resume(struct device *dev) struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - omap2430_low_level_init(musb); - musb_writel(musb->mregs, OTG_INTERFSEL, - musb->context.otg_interfsel); + if (musb) { + omap2430_low_level_init(musb); + musb_writel(musb->mregs, OTG_INTERFSEL, + musb->context.otg_interfsel); - usb_phy_set_suspend(musb->xceiv, 0); + usb_phy_set_suspend(musb->xceiv, 0); + } return 0; } -- cgit v1.2.3-70-g09d2 From c04352a590538123f8c93bd87ef1d4bb9e3a64c7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 4 Feb 2012 19:43:51 +0200 Subject: usb: musb: fix some runtime_pm issues When runtime_pm was originally added, it was done in rather confusing way: omap2430_musb_init() (called from musb_init_controller) would do runtime_pm_get_sync() and musb_init_controller() itself would do runtime_pm_put to balance it out. This is not only confusing but also wrong if non-omap2430 glue layer is used. This confusion resulted in commit 772aed45b604 "usb: musb: fix pm_runtime mismatch", that removed runtime_pm_put() from musb_init_controller as that looked unbalanced, and also happened to fix unrelated isp1704_charger crash. However this broke runtime PM functionality (musb is now always powered, even without gadget active). Avoid these confusing runtime pm dependences by making musb_init_controller() and omap2430_musb_init() do their own runtime get/put pairs; also cover error paths. Remove unneeded runtime_pm_put in omap2430_remove too. isp1704_charger crash that motivated 772aed45b604 will be fixed by following patch. Cc: Felipe Contreras Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 9 ++++++++- drivers/usb/musb/omap2430.c | 2 +- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0f8b82918a4..239214626ec 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1904,7 +1904,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (!musb->isr) { status = -ENODEV; - goto fail3; + goto fail2; } if (!musb->xceiv->io_ops) { @@ -1912,6 +1912,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->xceiv->io_ops = &musb_ulpi_access; } + pm_runtime_get_sync(musb->controller); + #ifndef CONFIG_MUSB_PIO_ONLY if (use_dma && dev->dma_mask) { struct dma_controller *c; @@ -2023,6 +2025,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail5; #endif + pm_runtime_put(musb->controller); + dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", ({char *s; switch (musb->board_mode) { @@ -2047,6 +2051,9 @@ fail4: musb_gadget_cleanup(musb); fail3: + pm_runtime_put_sync(musb->controller); + +fail2: if (musb->irq_wake) device_init_wakeup(dev, 0); musb_platform_exit(musb); diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 11b571ec22f..3dfd122266f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -333,6 +333,7 @@ static int omap2430_musb_init(struct musb *musb) setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); + pm_runtime_put_noidle(musb->controller); return 0; err1: @@ -478,7 +479,6 @@ static int __devexit omap2430_remove(struct platform_device *pdev) platform_device_del(glue->musb); platform_device_put(glue->musb); - pm_runtime_put(&pdev->dev); kfree(glue); return 0; -- cgit v1.2.3-70-g09d2 From f79a60b8785409f5a77767780315ce6d3ea04a44 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 29 Feb 2012 20:19:46 +0800 Subject: usb: fsl_udc_core: prime status stage once data stage has primed - For Control Read transfer, the ACK handshake on an IN transaction may be corrupted, so the device may not receive the ACK for data stage, the complete irq will not occur at this situation. Therefore, we need to move prime status stage from complete irq routine to the place where the data stage has just primed, or the host will never get ACK for status stage. The above issue has been described at USB2.0 spec chapter 8.5.3.3. - After adding prime status stage just after prime the data stage, there is a potential problem when the status dTD is added before the data stage has primed by hardware. The reason is the device's dTD descriptor has NO direction bit, if data stage (IN) prime hasn't finished, the status stage(OUT) dTD will be added at data stage dTD's Next dTD Pointer, so when the data stage transfer has finished, the status dTD will be primed as IN by hardware, then the host will never receive ACK from the device side for status stage. - Delete below code at fsl_ep_queue: /* Update ep0 state */ if ((ep_index(ep) == 0)) udc->ep0_state = DATA_STATE_XMIT; the udc->ep0_state will be updated again after udc->driver->setup finishes. It is tested at i.mx51 bbg board with g_mass_storage, g_ether, g_serial. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_udc_core.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 5f94e79cd6b..55abfb6bd61 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -730,7 +730,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) : (1 << (ep_index(ep))); /* check if the pipe is empty */ - if (!(list_empty(&ep->queue))) { + if (!(list_empty(&ep->queue)) && !(ep_index(ep) == 0)) { /* Add td to the end */ struct fsl_req *lastreq; lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); @@ -918,10 +918,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) return -ENOMEM; } - /* Update ep0 state */ - if ((ep_index(ep) == 0)) - udc->ep0_state = DATA_STATE_XMIT; - /* irq handler advances the queue */ if (req != NULL) list_add_tail(&req->queue, &ep->queue); @@ -1279,7 +1275,8 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) udc->ep0_dir = USB_DIR_OUT; ep = &udc->eps[0]; - udc->ep0_state = WAIT_FOR_OUT_STATUS; + if (udc->ep0_state != DATA_STATE_XMIT) + udc->ep0_state = WAIT_FOR_OUT_STATUS; req->ep = ep; req->req.length = 0; @@ -1384,6 +1381,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, list_add_tail(&req->queue, &ep->queue); udc->ep0_state = DATA_STATE_XMIT; + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + return; stall: ep0stall(udc); @@ -1492,6 +1492,14 @@ static void setup_received_irq(struct fsl_udc *udc, spin_lock(&udc->lock); udc->ep0_state = (setup->bRequestType & USB_DIR_IN) ? DATA_STATE_XMIT : DATA_STATE_RECV; + /* + * If the data stage is IN, send status prime immediately. + * See 2.0 Spec chapter 8.5.3.3 for detail. + */ + if (udc->ep0_state == DATA_STATE_XMIT) + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + } else { /* No data phase, IN status from gadget */ udc->ep0_dir = USB_DIR_IN; @@ -1520,9 +1528,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, switch (udc->ep0_state) { case DATA_STATE_XMIT: - /* receive status phase */ - if (ep0_prime_status(udc, EP_DIR_OUT)) - ep0stall(udc); + /* already primed at setup_received_irq */ + udc->ep0_state = WAIT_FOR_OUT_STATUS; break; case DATA_STATE_RECV: /* send status phase */ -- cgit v1.2.3-70-g09d2 From f7a83fe19336125d7eb26488788dc66c03f2c08e Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Tue, 6 Mar 2012 14:05:49 +0900 Subject: usb: s3c-hsotg: Fix TX FIFOs allocation According to documentation, TX FIFO_number index starts from 1. For IN endpoint FIFO 0 we use GNPTXFSIZ register for programming the size and memory start address. Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 69295ba9d99..e3fe5fd795f 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -340,7 +340,7 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) /* currently we allocate TX FIFOs for all possible endpoints, * and assume that they are all the same size. */ - for (ep = 0; ep <= 15; ep++) { + for (ep = 1; ep <= 15; ep++) { val = addr; val |= size << S3C_DPTXFSIZn_DPTxFSize_SHIFT; addr += size; -- cgit v1.2.3-70-g09d2 From 659ad60cb9128345d0a6b9093dda9b0e366b7937 Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Tue, 6 Mar 2012 14:07:29 +0900 Subject: usb: s3c-hsotg: Fix maximum patcket size setting for EP0 MPS field of DOEPCTL0 is read only. Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index e3fe5fd795f..03de169ab36 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1696,10 +1696,12 @@ static void s3c_hsotg_set_ep_maxpacket(struct s3c_hsotg *hsotg, reg |= mpsval; writel(reg, regs + S3C_DIEPCTL(ep)); - reg = readl(regs + S3C_DOEPCTL(ep)); - reg &= ~S3C_DxEPCTL_MPS_MASK; - reg |= mpsval; - writel(reg, regs + S3C_DOEPCTL(ep)); + if (ep) { + reg = readl(regs + S3C_DOEPCTL(ep)); + reg &= ~S3C_DxEPCTL_MPS_MASK; + reg |= mpsval; + writel(reg, regs + S3C_DOEPCTL(ep)); + } return; -- cgit v1.2.3-70-g09d2 From 70fa030ffb652ace81dd5bcab01255b49723caec Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Tue, 6 Mar 2012 14:08:29 +0900 Subject: usb: s3c-hsotg: Avoid TxFIFO corruption in DMA mode Writing to TxFIFO relates only to Slave mode and leads to TxFIFO corruption in DMA mode. Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 03de169ab36..8db23660b5e 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -1921,7 +1921,8 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, ints & S3C_DIEPMSK_TxFIFOEmpty) { dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", __func__, idx); - s3c_hsotg_trytx(hsotg, hs_ep); + if (!using_dma(hsotg)) + s3c_hsotg_trytx(hsotg, hs_ep); } } } -- cgit v1.2.3-70-g09d2 From db1d8ba36551bf55222c7961d9e9a1195a612fde Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Tue, 6 Mar 2012 14:09:19 +0900 Subject: usb: s3c-hsotg: Fix big buffers transfer in DMA mode DMA address register shouldn't be updated manually if transfer size requires multiple packets. Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c-hsotg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 8db23660b5e..105b206cd84 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -741,7 +741,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, /* write size / packets */ writel(epsize, hsotg->regs + epsize_reg); - if (using_dma(hsotg)) { + if (using_dma(hsotg) && !continuing) { unsigned int dma_reg; /* write DMA address to control register, buffer already -- cgit v1.2.3-70-g09d2 From 64b6c8a7019acc38cc6b37f8e72c1e915593b1bb Mon Sep 17 00:00:00 2001 From: Anton Tikhomirov Date: Tue, 6 Mar 2012 17:05:15 +0900 Subject: usb: dwc3: Free event buffers array Array should be freed together with event buffers, since it was allocated dynamically. Signed-off-by: Anton Tikhomirov Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7bd815a507e..99b58d84553 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -206,11 +206,11 @@ static void dwc3_free_event_buffers(struct dwc3 *dwc) for (i = 0; i < dwc->num_event_buffers; i++) { evt = dwc->ev_buffs[i]; - if (evt) { + if (evt) dwc3_free_one_event_buffer(dwc, evt); - dwc->ev_buffs[i] = NULL; - } } + + kfree(dwc->ev_buffs); } /** -- cgit v1.2.3-70-g09d2 From e2190a97c6d493eef1f180b9dadfd5ffd4706051 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 12 Mar 2012 12:55:41 +0100 Subject: usb: gadget: FunctionFS: clear FFS_FL_BOUND flag on unbind (bugfix) clear FFS_FL_BOUND flag on unbind (bugfix) Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1cbba70836b..d187ae73262 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -1382,6 +1382,7 @@ static void functionfs_unbind(struct ffs_data *ffs) ffs->ep0req = NULL; ffs->gadget = NULL; ffs_data_put(ffs); + clear_bit(FFS_FL_BOUND, &ffs->flags); } } -- cgit v1.2.3-70-g09d2 From 8545e6031a719675da9f3d21f1c8ce143dac7fe5 Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 12 Mar 2012 12:55:42 +0100 Subject: usb: gadget: FunctionFS: make module init & exit __init & __exit make module init & exit __init & __exit Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/g_ffs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 331cd6729d3..a85eaf40b94 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -161,7 +161,7 @@ static struct usb_composite_driver gfs_driver = { static struct ffs_data *gfs_ffs_data; static unsigned long gfs_registered; -static int gfs_init(void) +static int __init gfs_init(void) { ENTER(); @@ -169,7 +169,7 @@ static int gfs_init(void) } module_init(gfs_init); -static void gfs_exit(void) +static void __exit gfs_exit(void) { ENTER(); -- cgit v1.2.3-70-g09d2 From 692933b2ccfce02400dc8360a97acde2846e8541 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 14 Mar 2012 17:33:35 +0530 Subject: usb: musb: fix bug in musb_cleanup_urb Control transfers with data expected from device to host will use usb_rcvctrlpipe() for urb->pipe so for such urbs 'is_in' will be set causing control urb to fall into the first "if" condition in musb_cleanup_urb(). Fixed by adding logic to check for non control endpoints. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 79cb0af779f..ef8d744800a 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2098,7 +2098,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) } /* turn off DMA requests, discard state, stop polling ... */ - if (is_in) { + if (ep->epnum && is_in) { /* giveback saves bulk toggle */ csr = musb_h_flush_rxfifo(ep, 0); -- cgit v1.2.3-70-g09d2 From bf070bc14178f1458e7eccd76316ac24f76f1890 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 21 Mar 2012 16:35:52 +0200 Subject: usb: musb: wake the device before ulpi transfers musb can be suspended at the time some other driver wants to do ulpi transfers using usb_phy_io_* functions, and that can cause data abort, as it happened with isp1704_charger: http://article.gmane.org/gmane.linux.kernel/1226122 Add pm_runtime to ulpi functions to rectify this. This also adds io_dev to usb_phy so that pm_runtime_* functions can be used. Cc: Felipe Contreras Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 31 +++++++++++++++++++++++++------ include/linux/usb/otg.h | 1 + 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 239214626ec..66aaccf0449 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -137,6 +137,9 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) int i = 0; u8 r; u8 power; + int ret; + + pm_runtime_get_sync(phy->io_dev); /* Make sure the transceiver is not in low power mode */ power = musb_readb(addr, MUSB_POWER); @@ -154,15 +157,22 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset) while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) & MUSB_ULPI_REG_CMPLT)) { i++; - if (i == 10000) - return -ETIMEDOUT; + if (i == 10000) { + ret = -ETIMEDOUT; + goto out; + } } r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); r &= ~MUSB_ULPI_REG_CMPLT; musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); - return musb_readb(addr, MUSB_ULPI_REG_DATA); + ret = musb_readb(addr, MUSB_ULPI_REG_DATA); + +out: + pm_runtime_put(phy->io_dev); + + return ret; } static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) @@ -171,6 +181,9 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) int i = 0; u8 r = 0; u8 power; + int ret = 0; + + pm_runtime_get_sync(phy->io_dev); /* Make sure the transceiver is not in low power mode */ power = musb_readb(addr, MUSB_POWER); @@ -184,15 +197,20 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data) while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL) & MUSB_ULPI_REG_CMPLT)) { i++; - if (i == 10000) - return -ETIMEDOUT; + if (i == 10000) { + ret = -ETIMEDOUT; + goto out; + } } r = musb_readb(addr, MUSB_ULPI_REG_CONTROL); r &= ~MUSB_ULPI_REG_CMPLT; musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r); - return 0; +out: + pm_runtime_put(phy->io_dev); + + return ret; } #else #define musb_ulpi_read NULL @@ -1908,6 +1926,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) } if (!musb->xceiv->io_ops) { + musb->xceiv->io_dev = musb->controller; musb->xceiv->io_priv = musb->mregs; musb->xceiv->io_ops = &musb_ulpi_access; } diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index f67810f8f21..38ab3f46346 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -94,6 +94,7 @@ struct usb_phy { struct usb_otg *otg; + struct device *io_dev; struct usb_phy_io_ops *io_ops; void __iomem *io_priv; -- cgit v1.2.3-70-g09d2 From 3006dc8c627d738693e910c159630e4368c9e86c Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 21 Mar 2012 21:30:20 +0530 Subject: usb: musb: omap: fix crash when musb glue (omap) gets initialized pm_runtime_enable is being called after omap2430_musb_init. Hence pm_runtime_get_sync in omap2430_musb_init does not have any effect (does not enable clocks) resulting in a crash during register access. It is fixed here. Cc: stable@vger.kernel.org # v3.0, v3.1, v3.2, v3.3 Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 3dfd122266f..0fb4ce84d17 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -453,14 +453,14 @@ static int __devinit omap2430_probe(struct platform_device *pdev) goto err2; } + pm_runtime_enable(&pdev->dev); + ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); goto err2; } - pm_runtime_enable(&pdev->dev); - return 0; err2: -- cgit v1.2.3-70-g09d2 From 8ae8090c82eb407267001f75b3d256b3bd4ae691 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 21 Mar 2012 21:34:30 +0530 Subject: usb: gadget: udc-core: fix asymmetric calls in remove_driver During modprobe of gadget driver, pullup is called after udc_start. In order to make the exit path symmetric when removing a gadget driver, call pullup before ->udc_stop. This is needed to avoid issues with PM where udc_stop disables the module completely (put IP in reset state, cut functional and interface clocks, and so on), which prevents us from accessing the IP's address space, thus creating the possibility of an abort exception when we try to access IP's address space after clocks are off. Cc: stable@vger.kernel.org Signed-off-by: Partha Basak Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index c261887e05a..2fa9865babe 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -264,8 +264,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); udc->driver->unbind(udc->gadget); - usb_gadget_udc_stop(udc->gadget, udc->driver); usb_gadget_disconnect(udc->gadget); + usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); } -- cgit v1.2.3-70-g09d2 From ad579699c4f0274bf522a9252ff9b20c72197e48 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Thu, 22 Mar 2012 12:48:06 +0530 Subject: usb: musb: omap: fix the error check for pm_runtime_get_sync pm_runtime_get_sync returns a signed integer. In case of errors it returns a negative value. This patch fixes the error check by making it signed instead of unsigned thus preventing register access if get_sync_fails. Also passes the error cause to the debug message. Cc: stable@vger.kernel.org Cc: Kishon Vijay Abraham I Signed-off-by: Shubhrajyoti D Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 0fb4ce84d17..c7785e81254 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -282,7 +282,8 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work) static int omap2430_musb_init(struct musb *musb) { - u32 l, status = 0; + u32 l; + int status = 0; struct device *dev = musb->controller; struct musb_hdrc_platform_data *plat = dev->platform_data; struct omap_musb_board_data *data = plat->board_data; @@ -301,7 +302,7 @@ static int omap2430_musb_init(struct musb *musb) status = pm_runtime_get_sync(dev); if (status < 0) { - dev_err(dev, "pm_runtime_get_sync FAILED"); + dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); goto err1; } -- cgit v1.2.3-70-g09d2 From f135617224b4a1113b26b8ee5877e94f38e40d1e Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Fri, 10 Feb 2012 09:54:51 +0100 Subject: usb: gadget: rndis: fix Missing req->context assignment It is crucial to assign each req->context value to struct rndis. The problem happens for multi function gadget (g_multi) when multiple functions are calling common usb_composite_dev control request. It might happen that *_setup method from one usb function will alter some fields of this common request issued by other USB function. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_rndis.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 7b1cf18df5e..52343654f5d 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -500,6 +500,7 @@ rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) if (buf) { memcpy(req->buf, buf, n); req->complete = rndis_response_complete; + req->context = rndis; rndis_free_response(rndis->config, buf); value = n; } -- cgit v1.2.3-70-g09d2 From 6190c79df861d2c78a7448fe6d4260e5fa53b9b9 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Fri, 23 Mar 2012 22:23:13 +0530 Subject: usb: gadget: uvc: Remove non-required locking from 'uvc_queue_next_buffer' routine This patch removes the non-required spinlock acquire/release calls on 'queue->irqlock' from 'uvc_queue_next_buffer' routine. This routine is called from 'video->encode' function (which translates to either 'uvc_video_encode_bulk' or 'uvc_video_encode_isoc') in 'uvc_video.c'. As, the 'video->encode' routines are called with 'queue->irqlock' already held, so acquiring a 'queue->irqlock' again in 'uvc_queue_next_buffer' routine causes a spin lock recursion. Signed-off-by: Bhupesh Sharma Acked-by: Laurent Pinchart Signed-off-by: Felipe Balbi --- drivers/usb/gadget/uvc_queue.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index d776adb2da6..0cdf89d32a1 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -543,11 +543,11 @@ done: return ret; } +/* called with queue->irqlock held.. */ static struct uvc_buffer * uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) { struct uvc_buffer *nextbuf; - unsigned long flags; if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && buf->buf.length != buf->buf.bytesused) { @@ -556,14 +556,12 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) return buf; } - spin_lock_irqsave(&queue->irqlock, flags); list_del(&buf->queue); if (!list_empty(&queue->irqqueue)) nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, queue); else nextbuf = NULL; - spin_unlock_irqrestore(&queue->irqlock, flags); buf->buf.sequence = queue->sequence++; do_gettimeofday(&buf->buf.timestamp); -- cgit v1.2.3-70-g09d2 From 92b0abf80c5c5f0e0d71d1309688a330fd74731b Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Wed, 28 Mar 2012 09:30:50 +0200 Subject: usb: gadget: eliminate NULL pointer dereference (bugfix) usb: gadget: eliminate NULL pointer dereference (bugfix) This patch fixes a bug which causes NULL pointer dereference in ffs_ep0_ioctl. The bug happens when the FunctionFS is not bound (either has not been bound yet or has been bound and then unbound) and can be reproduced with running the following commands: $ insmod g_ffs.ko $ mount -t functionfs func /dev/usbgadget $ ./null where null.c is: #include #include int main(void) { int fd = open("/dev/usbgadget/ep0", O_RDWR); ioctl(fd, FUNCTIONFS_CLEAR_HALT); return 0; } Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index d187ae73262..f52cb1ae45d 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -712,7 +712,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) if (code == FUNCTIONFS_INTERFACE_REVMAP) { struct ffs_function *func = ffs->func; ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV; - } else if (gadget->ops->ioctl) { + } else if (gadget && gadget->ops->ioctl) { ret = gadget->ops->ioctl(gadget, code, value); } else { ret = -ENOTTY; -- cgit v1.2.3-70-g09d2 From fcff311c938c95c90573c060d37648df00e45017 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 21 Mar 2012 12:32:32 +0000 Subject: staging: sep: Fix sign of error One of our errors wasn't negative as intended. Fix this. (Found by Hillf Danton) While we are at it turn user causable messages down to dev_dbg level in the ioctl paths. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sep/sep_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c index ad54c2e5c93..f1701bc6e31 100644 --- a/drivers/staging/sep/sep_main.c +++ b/drivers/staging/sep/sep_main.c @@ -3114,7 +3114,7 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) current->pid); if (1 == test_bit(SEP_LEGACY_SENDMSG_DONE_OFFSET, &call_status->status)) { - dev_warn(&sep->pdev->dev, + dev_dbg(&sep->pdev->dev, "[PID%d] dcb prep needed before send msg\n", current->pid); error = -EPROTO; @@ -3122,9 +3122,9 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } if (!arg) { - dev_warn(&sep->pdev->dev, + dev_dbg(&sep->pdev->dev, "[PID%d] dcb null arg\n", current->pid); - error = EINVAL; + error = -EINVAL; goto end_function; } -- cgit v1.2.3-70-g09d2 From eaa004a4ba3264d17d7e6882948a7980e14e9d20 Mon Sep 17 00:00:00 2001 From: Gerard Snitselaar Date: Fri, 23 Mar 2012 03:21:05 -0700 Subject: staging/vme: Fix module parameters loopback should be declared bool, and variant probably shouldn't be const. Signed-off-by: Gerard Snitselaar Acked-by: Martyn Welch Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/devices/vme_pio2_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 9fedc442a77..573c80003f0 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -35,10 +35,10 @@ static int vector[PIO2_CARDS_MAX]; static int vector_num; static int level[PIO2_CARDS_MAX]; static int level_num; -static const char *variant[PIO2_CARDS_MAX]; +static char *variant[PIO2_CARDS_MAX]; static int variant_num; -static int loopback; +static bool loopback; static int pio2_match(struct vme_dev *); static int __devinit pio2_probe(struct vme_dev *); -- cgit v1.2.3-70-g09d2 From 50637f050e88fb175135de62a53be33c374a5349 Mon Sep 17 00:00:00 2001 From: Dan Magenheimer Date: Fri, 23 Mar 2012 09:40:15 -0700 Subject: staging: ramster: unbreak my heart The just-merged ramster staging driver was dependent on a cleanup patch in cleancache, so was marked CONFIG_BROKEN until that patch could be merged. That cleancache patch is now merged (and the correct SHA of the cleancache patch is 3167760f83899ccda312b9ad9306ec9e5dda06d4 rather than the one shown in the comment removed in the patch below). So remove the CONFIG_BROKEN now and the comment that is no longer true... Signed-off-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ramster/Kconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/ramster/Kconfig b/drivers/staging/ramster/Kconfig index 8b57b87edda..4af1f8d4b95 100644 --- a/drivers/staging/ramster/Kconfig +++ b/drivers/staging/ramster/Kconfig @@ -1,10 +1,6 @@ -# Dependency on CONFIG_BROKEN is because there is a commit dependency -# on a cleancache naming change to be submitted by Konrad Wilk -# a39c00ded70339603ffe1b0ffdf3ade85bcf009a "Merge branch 'stable/cleancache.v13' -# into linux-next. Once this commit is present, BROKEN can be removed config RAMSTER bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem" - depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM && BROKEN + depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM select LZO_COMPRESS select LZO_DECOMPRESS default n -- cgit v1.2.3-70-g09d2 From 218f4d437d69b4621f36affd52dcd6343597149a Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Sat, 24 Mar 2012 07:19:25 +0100 Subject: staging:iio:core add missing increment of loop index in iio_map_array_unregister() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit staging:iio:core add missing increment of loop index in iio_map_array_unregister() Signed-off-by: Lothar Waßmann Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/inkern.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/iio/inkern.c b/drivers/staging/iio/inkern.c index de2c8ea6496..ef07a02bf54 100644 --- a/drivers/staging/iio/inkern.c +++ b/drivers/staging/iio/inkern.c @@ -82,6 +82,7 @@ int iio_map_array_unregister(struct iio_dev *indio_dev, ret = -ENODEV; goto error_ret; } + i++; } error_ret: mutex_unlock(&iio_map_list_lock); -- cgit v1.2.3-70-g09d2 From 401c90e56c48b1c642507a8bec91b7ae21f1156e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 24 Mar 2012 23:39:18 +0100 Subject: staging/media/as102: Don't call release_firmware() on uninitialized variable If, in drivers/staging/media/as102/as102_fw.c::as102_fw_upload(), the call cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL); should fail and return NULL so that we jump to the 'error:' label, then we'll end up calling 'release_firmware(firmware);' with 'firmware' still uninitialized - not good. The easy fix is to just initialize 'firmware' to NULL when we declare it, since release_firmware() deals gracefully with being passed NULL pointers. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/staging/media/as102/as102_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c index 43ebc43e6b9..1075fb1df0d 100644 --- a/drivers/staging/media/as102/as102_fw.c +++ b/drivers/staging/media/as102/as102_fw.c @@ -165,7 +165,7 @@ error: int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap) { int errno = -EFAULT; - const struct firmware *firmware; + const struct firmware *firmware = NULL; unsigned char *cmd_buf = NULL; char *fw1, *fw2; struct usb_device *dev = bus_adap->usb_dev; -- cgit v1.2.3-70-g09d2 From 4ca5218e3939685c2325fc0a0a1ac8150272c93f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 29 Mar 2012 09:43:54 +0300 Subject: Staging: vt6655-6: check keysize before memcpy() We need to check the we don't copy too much memory. This comes from a copy_from_user() in the ioctl. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6655/key.c | 3 +++ drivers/staging/vt6656/key.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/vt6655/key.c b/drivers/staging/vt6655/key.c index 0ff8d7bbf2a..774b0d4a7e0 100644 --- a/drivers/staging/vt6655/key.c +++ b/drivers/staging/vt6655/key.c @@ -655,6 +655,9 @@ bool KeybSetDefaultKey ( return (false); } + if (uKeyLength > MAX_KEY_LEN) + return false; + pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = true; for(ii=0;iiKeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF; diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c index 27bb523c8a9..ee62a06a75f 100644 --- a/drivers/staging/vt6656/key.c +++ b/drivers/staging/vt6656/key.c @@ -684,6 +684,9 @@ BOOL KeybSetDefaultKey( return (FALSE); } + if (uKeyLength > MAX_KEY_LEN) + return false; + pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = TRUE; for (ii = 0; ii < ETH_ALEN; ii++) pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF; -- cgit v1.2.3-70-g09d2 From 0d05568ac79bfc595f1eadc3e0fd7a20a45f7b69 Mon Sep 17 00:00:00 2001 From: wwang Date: Tue, 27 Mar 2012 16:43:11 +0800 Subject: staging:rts_pstor:Fix possible panic by NULL pointer dereference rtsx_transport.c (rtsx_transfer_sglist_adma_partial): pointer struct scatterlist *sg, which is mapped in dma_map_sg, is used as an iterator in later transfer operation. It is corrupted and passed to dma_unmap_sg, thus causing fatal unmap of some erroneous address. Fix it by duplicating *sg_ptr for iterating. Signed-off-by: wwang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/rtsx_transport.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rts_pstor/rtsx_transport.c b/drivers/staging/rts_pstor/rtsx_transport.c index 4e3d2c106af..9b2e5c99870 100644 --- a/drivers/staging/rts_pstor/rtsx_transport.c +++ b/drivers/staging/rts_pstor/rtsx_transport.c @@ -335,6 +335,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, int sg_cnt, i, resid; int err = 0; long timeleft; + struct scatterlist *sg_ptr; u32 val = TRIG_DMA; if ((sg == NULL) || (num_sg <= 0) || !offset || !index) @@ -371,7 +372,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, sg_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir); resid = size; - + sg_ptr = sg; chip->sgi = 0; /* Usually the next entry will be @sg@ + 1, but if this sg element * is part of a chained scatterlist, it could jump to the start of @@ -379,14 +380,14 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, * the proper sg */ for (i = 0; i < *index; i++) - sg = sg_next(sg); + sg_ptr = sg_next(sg_ptr); for (i = *index; i < sg_cnt; i++) { dma_addr_t addr; unsigned int len; u8 option; - addr = sg_dma_address(sg); - len = sg_dma_len(sg); + addr = sg_dma_address(sg_ptr); + len = sg_dma_len(sg_ptr); RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n", (unsigned int)addr, len); @@ -415,7 +416,7 @@ static int rtsx_transfer_sglist_adma_partial(struct rtsx_chip *chip, u8 card, if (!resid) break; - sg = sg_next(sg); + sg_ptr = sg_next(sg_ptr); } RTSX_DEBUGP("SG table count = %d\n", chip->sgi); -- cgit v1.2.3-70-g09d2 From b5bd70a162492a76ee49065605ca15d484bb623a Mon Sep 17 00:00:00 2001 From: wwang Date: Tue, 27 Mar 2012 16:43:20 +0800 Subject: staging:rts_pstor:Avoid "Bad target number" message when probing driver Avoid "Bad LUN" and "Bad target number" message by setting the supported max_lun and max_id for the scsi host Signed-off-by: wwang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/rtsx.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/rts_pstor/rtsx.c b/drivers/staging/rts_pstor/rtsx.c index a7feb3e328a..1dccd933a7e 100644 --- a/drivers/staging/rts_pstor/rtsx.c +++ b/drivers/staging/rts_pstor/rtsx.c @@ -1000,6 +1000,11 @@ static int __devinit rtsx_probe(struct pci_dev *pci, rtsx_init_chip(dev->chip); + /* set the supported max_lun and max_id for the scsi host + * NOTE: the minimal value of max_id is 1 */ + host->max_id = 1; + host->max_lun = dev->chip->max_lun; + /* Start up our control thread */ th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME); if (IS_ERR(th)) { -- cgit v1.2.3-70-g09d2 From 678b7c17073a9e383f204c3e8e0000821afb6103 Mon Sep 17 00:00:00 2001 From: Chris Kelly Date: Thu, 29 Mar 2012 12:09:45 +0000 Subject: staging: ozwpan: Added new maintainer for ozwpan Added Rupesh Gujare to MAINTAINERS file and contact in TODO file for ozwpan driver. Signed-off-by: Chris Kelly Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 + drivers/staging/ozwpan/TODO | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 2dcfca85063..d87ad1844b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6466,6 +6466,7 @@ S: Odd Fixes F: drivers/staging/olpc_dcon/ STAGING - OZMO DEVICES USB OVER WIFI DRIVER +M: Rupesh Gujare M: Chris Kelly S: Maintained F: drivers/staging/ozwpan/ diff --git a/drivers/staging/ozwpan/TODO b/drivers/staging/ozwpan/TODO index f7a9c122f59..c2d30a7112f 100644 --- a/drivers/staging/ozwpan/TODO +++ b/drivers/staging/ozwpan/TODO @@ -8,5 +8,7 @@ TODO: - code review by USB developer community. - testing with as many devices as possible. -Please send any patches for this driver to Chris Kelly +Please send any patches for this driver to +Rupesh Gujare +Chris Kelly and Greg Kroah-Hartman . -- cgit v1.2.3-70-g09d2 From 3fd654c22c7b002e8681accaed50a6d46656d815 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 29 Mar 2012 21:52:57 +0300 Subject: Staging: rts_pstor: off by one in for loop I already fixed the other similar for loop in this file. I'm not sure how I missed this one. We use seg_no+1 inside the loop so we can't go right up to the end of the loop. Also if we don't break out of the loop then we end up past the end of the array, but with this fix we end up on the last element. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rts_pstor/ms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/rts_pstor/ms.c b/drivers/staging/rts_pstor/ms.c index 66341dff8c9..f9a4498984c 100644 --- a/drivers/staging/rts_pstor/ms.c +++ b/drivers/staging/rts_pstor/ms.c @@ -3498,7 +3498,8 @@ static int ms_rw_multi_sector(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 log_blk++; - for (seg_no = 0; seg_no < sizeof(ms_start_idx)/2; seg_no++) { + for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1; + seg_no++) { if (log_blk < ms_start_idx[seg_no+1]) break; } -- cgit v1.2.3-70-g09d2 From f4477e90b3ea4c40466e8f418cf41a17aef09192 Mon Sep 17 00:00:00 2001 From: Nitin Gupta Date: Mon, 2 Apr 2012 09:13:56 -0500 Subject: staging: zsmalloc: fix memory leak This patch fixes a memory leak in zsmalloc where the first subpage of each zspage is leaked when the zspage is freed. Signed-off-by: Nitin Gupta Acked-by: Seth Jennings Acked-by: Dan Magenheimer Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zsmalloc/zsmalloc-main.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/zsmalloc/zsmalloc-main.c b/drivers/staging/zsmalloc/zsmalloc-main.c index 09caa4f2687..917461c6601 100644 --- a/drivers/staging/zsmalloc/zsmalloc-main.c +++ b/drivers/staging/zsmalloc/zsmalloc-main.c @@ -267,33 +267,39 @@ static unsigned long obj_idx_to_offset(struct page *page, return off + obj_idx * class_size; } +static void reset_page(struct page *page) +{ + clear_bit(PG_private, &page->flags); + clear_bit(PG_private_2, &page->flags); + set_page_private(page, 0); + page->mapping = NULL; + page->freelist = NULL; + reset_page_mapcount(page); +} + static void free_zspage(struct page *first_page) { - struct page *nextp, *tmp; + struct page *nextp, *tmp, *head_extra; BUG_ON(!is_first_page(first_page)); BUG_ON(first_page->inuse); - nextp = (struct page *)page_private(first_page); + head_extra = (struct page *)page_private(first_page); - clear_bit(PG_private, &first_page->flags); - clear_bit(PG_private_2, &first_page->flags); - set_page_private(first_page, 0); - first_page->mapping = NULL; - first_page->freelist = NULL; - reset_page_mapcount(first_page); + reset_page(first_page); __free_page(first_page); /* zspage with only 1 system page */ - if (!nextp) + if (!head_extra) return; - list_for_each_entry_safe(nextp, tmp, &nextp->lru, lru) { + list_for_each_entry_safe(nextp, tmp, &head_extra->lru, lru) { list_del(&nextp->lru); - clear_bit(PG_private_2, &nextp->flags); - nextp->index = 0; + reset_page(nextp); __free_page(nextp); } + reset_page(head_extra); + __free_page(head_extra); } /* Initialize a newly allocated zspage */ -- cgit v1.2.3-70-g09d2 From be0775ac140dd80a1d60fb7e71ec60e649c14ff8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 5 Apr 2012 10:34:56 -0500 Subject: staging: drm/omap: move where DMM driver is registered Not sure what triggered the change in behavior, but seems to result in recursively acquiring a mutex and hanging on boot. But omap_drm_init() seems a much more sane place to register the driver for the DMM sub-device. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/omapdrm/omap_drv.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c index 3df5b4c58ec..620b8d54223 100644 --- a/drivers/staging/omapdrm/omap_drv.c +++ b/drivers/staging/omapdrm/omap_drv.c @@ -803,9 +803,6 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { DBG("%s", device->name); - if (platform_driver_register(&omap_dmm_driver)) - dev_err(&device->dev, "DMM registration failed\n"); - return drm_platform_init(&omap_drm_driver, device); } @@ -833,6 +830,10 @@ struct platform_driver pdev = { static int __init omap_drm_init(void) { DBG("init"); + if (platform_driver_register(&omap_dmm_driver)) { + /* we can continue on without DMM.. so not fatal */ + dev_err(NULL, "DMM registration failed\n"); + } return platform_driver_register(&pdev); } -- cgit v1.2.3-70-g09d2 From 40f32d9345bee0b24d3317b498e79b02e4be27f4 Mon Sep 17 00:00:00 2001 From: Preetham Chandru Date: Mon, 9 Apr 2012 18:05:01 +0530 Subject: staging: iio: ak8975: Remove i2c client data corruption i2c client data set is of type struct indio_dev pointer and hence the pointer returned from i2c_get_clientdata() should be assigned to an object of type struct indio_dev and not to an object of type struct ak8975_data. Also in ak8975_probe() client data should be set first before calling ak8975_setup() as it references the client data. Signed-off-by: Preetham Chandru R CC: Laxman Dewangan Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/magnetometer/ak8975.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c index d5ddac3d883..ebc2d0840ca 100644 --- a/drivers/staging/iio/magnetometer/ak8975.c +++ b/drivers/staging/iio/magnetometer/ak8975.c @@ -108,7 +108,8 @@ static const int ak8975_index_to_reg[] = { static int ak8975_write_data(struct i2c_client *client, u8 reg, u8 val, u8 mask, u8 shift) { - struct ak8975_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); u8 regval; int ret; @@ -159,7 +160,8 @@ static int ak8975_read_data(struct i2c_client *client, */ static int ak8975_setup(struct i2c_client *client) { - struct ak8975_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ak8975_data *data = iio_priv(indio_dev); u8 device_id; int ret; @@ -509,6 +511,7 @@ static int ak8975_probe(struct i2c_client *client, goto exit_gpio; } data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); /* Perform some basic start-of-day setup of the device. */ err = ak8975_setup(client); if (err < 0) { @@ -516,7 +519,6 @@ static int ak8975_probe(struct i2c_client *client, goto exit_free_iio; } - i2c_set_clientdata(client, indio_dev); data->client = client; mutex_init(&data->lock); data->eoc_irq = client->irq; -- cgit v1.2.3-70-g09d2 From 099f5d01a6f73712e17552679aa724e021809a6e Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Wed, 21 Mar 2012 10:18:33 -0700 Subject: android: make persistent_ram based drivers depend on HAVE_MEMBLOCK m68k doesn't have memblock_reserve, which causes a build failure with allmodconfig. Make PERSISTENT_RAM and RAM_CONSOLE depend on HAVE_MEMBLOCK. Reported-by: Geert Uytterhoeven Reported-by: Paul Gortmaker Signed-off-by: Colin Cross Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 08a3b1133d2..eb1dee26bda 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -27,13 +27,14 @@ config ANDROID_LOGGER config ANDROID_PERSISTENT_RAM bool + depends on HAVE_MEMBLOCK select REED_SOLOMON select REED_SOLOMON_ENC8 select REED_SOLOMON_DEC8 config ANDROID_RAM_CONSOLE bool "Android RAM buffer console" - depends on !S390 && !UML + depends on !S390 && !UML && HAVE_MEMBLOCK select ANDROID_PERSISTENT_RAM default n -- cgit v1.2.3-70-g09d2 From 5d92f71e687e4e1a0bed489707d1ec58fe1100de Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 21 Mar 2012 09:24:57 +0800 Subject: Staging: android: timed_gpio: Fix resource leak in timed_gpio_probe error paths If gpio_request fails, we need to free all allocated resources. Current code uses wrong array index to access gpio_data array. So current code actually frees gpio_data[i].gpio by j times. This patch moves the error handling code to err_out and thus improves readability. Signed-off-by: Axel Lin Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/timed_gpio.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bc723eff11a..45c522cbe78 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -85,7 +85,7 @@ static int timed_gpio_probe(struct platform_device *pdev) struct timed_gpio_platform_data *pdata = pdev->dev.platform_data; struct timed_gpio *cur_gpio; struct timed_gpio_data *gpio_data, *gpio_dat; - int i, j, ret = 0; + int i, ret; if (!pdata) return -EBUSY; @@ -108,18 +108,12 @@ static int timed_gpio_probe(struct platform_device *pdev) gpio_dat->dev.get_time = gpio_get_time; gpio_dat->dev.enable = gpio_enable; ret = gpio_request(cur_gpio->gpio, cur_gpio->name); - if (ret >= 0) { - ret = timed_output_dev_register(&gpio_dat->dev); - if (ret < 0) - gpio_free(cur_gpio->gpio); - } + if (ret < 0) + goto err_out; + ret = timed_output_dev_register(&gpio_dat->dev); if (ret < 0) { - for (j = 0; j < i; j++) { - timed_output_dev_unregister(&gpio_data[i].dev); - gpio_free(gpio_data[i].gpio); - } - kfree(gpio_data); - return ret; + gpio_free(cur_gpio->gpio); + goto err_out; } gpio_dat->gpio = cur_gpio->gpio; @@ -131,6 +125,15 @@ static int timed_gpio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, gpio_data); return 0; + +err_out: + while (--i >= 0) { + timed_output_dev_unregister(&gpio_data[i].dev); + gpio_free(gpio_data[i].gpio); + } + kfree(gpio_data); + + return ret; } static int timed_gpio_remove(struct platform_device *pdev) -- cgit v1.2.3-70-g09d2 From 6490311f423b0d77969d6fa2ab6354b87e373bf9 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 19 Mar 2012 21:50:09 +0400 Subject: staging/xgifb: fix display on XGI Volari Z11m cards Image on Z11m cards was totally garbled due to wrong memory being selected. Add a special handling for Z11m cards. Tested on PCIe Z11 and Z11m cards. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/xgifb/vb_init.c | 2 +- drivers/staging/xgifb/vb_setmode.c | 7 +++++++ drivers/staging/xgifb/vb_table.h | 11 ++++++++++- 3 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c index 94d5c35e22f..3650bbff768 100644 --- a/drivers/staging/xgifb/vb_init.c +++ b/drivers/staging/xgifb/vb_init.c @@ -61,7 +61,7 @@ XGINew_GetXG20DRAMType(struct xgi_hw_device_info *HwDeviceExtension, } temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B); /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */ - if ((temp & 0x88) == 0x80) + if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08)) data = 0; /* DDR */ else data = 1; /* DDRII */ diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c index 2919924213c..60d4adf9992 100644 --- a/drivers/staging/xgifb/vb_setmode.c +++ b/drivers/staging/xgifb/vb_setmode.c @@ -152,6 +152,7 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) pVBInfo->pXGINew_CR97 = &XG20_CR97; if (ChipType == XG27) { + unsigned char temp; pVBInfo->MCLKData = (struct SiS_MCLKData *) XGI27New_MCLKData; pVBInfo->CR40 = XGI27_cr41; @@ -162,7 +163,13 @@ void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo) pVBInfo->pCRDE = XG27_CRDE; pVBInfo->pSR40 = &XG27_SR40; pVBInfo->pSR41 = &XG27_SR41; + pVBInfo->SR15 = XG27_SR13; + /*Z11m DDR*/ + temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B); + /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */ + if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08)) + pVBInfo->pXGINew_CR97 = &Z11m_CR97; } if (ChipType >= XG20) { diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h index dddf261ed53..e8d6f674b27 100644 --- a/drivers/staging/xgifb/vb_table.h +++ b/drivers/staging/xgifb/vb_table.h @@ -33,6 +33,13 @@ static struct XGI_ECLKDataStruct XGI340_ECLKData[] = { {0x5c, 0x23, 0x01, 166} }; +static unsigned char XG27_SR13[4][8] = { + {0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */ + {0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */ + {0x32, 0x32, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR18 */ + {0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00} /* SR1B */ +}; + static unsigned char XGI340_SR13[4][8] = { {0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */ {0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */ @@ -71,7 +78,7 @@ static unsigned char XGI27_cr41[24][8] = { {0x20, 0x40, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 0 CR41 */ {0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 1 CR8A */ {0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 2 CR8B */ - {0xB5, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7], + {0xB3, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7], CR99[2:0], CR45[3:0]*/ {0xf0, 0xf5, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 4 CR59 */ @@ -2803,6 +2810,8 @@ static unsigned char XG27_CRDE[2]; static unsigned char XG27_SR40 = 0x04 ; static unsigned char XG27_SR41 = 0x00 ; +static unsigned char Z11m_CR97 = 0x80 ; + static struct XGI330_VCLKDataStruct XGI_VCLKData[] = { /* SR2B,SR2C,SR2D */ {0x1B, 0xE1, 25}, /* 00 (25.175MHz) */ -- cgit v1.2.3-70-g09d2 From c4867936474183332db4c19791a65fdad6474fd5 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 10 Apr 2012 10:42:36 +0200 Subject: drm/i915: properly compute dp dithering for user-created modes We've only computed whether we need to fall back to 6bpc due to dp link bandwidth constrains in mode_valid, but not mode_fixup. Under various circumstances X likes to create new modes which then lack proper 6bpc flags (if required), resulting in mode_fixup failures and ultimately black screens. Chris Wilson pointed out that we still get things wrong for bpp > 24, but that should be fixed in another patch (and it'll be easier because this patch consolidates the logic). The likely culprit for this regression is commit 3d794f87238f74d80e78a7611c7fbde8a54c85c2 Author: Keith Packard Date: Wed Jan 25 08:16:25 2012 -0800 drm/i915: Force explicit bpp selection for intel_dp_link_required v2: Fix indentation and tune down the too bold claim that this should fix the world. Both noticed by Chris Wilson. v3: Try to really git add things. Reported-and-tested-by: Brice Goglin Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48170 Cc: stable@kernel.org Reviewed-by: Adam Jackson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 49 +++++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 110552ff302..4b637919f74 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -219,14 +219,38 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes) return (max_link_clock * max_lanes * 8) / 10; } +static bool +intel_dp_adjust_dithering(struct intel_dp *intel_dp, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); + int max_lanes = intel_dp_max_lane_count(intel_dp); + int max_rate, mode_rate; + + mode_rate = intel_dp_link_required(mode->clock, 24); + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + + if (mode_rate > max_rate) { + mode_rate = intel_dp_link_required(mode->clock, 18); + if (mode_rate > max_rate) + return false; + + if (adjusted_mode) + adjusted_mode->private_flags + |= INTEL_MODE_DP_FORCE_6BPC; + + return true; + } + + return true; +} + static int intel_dp_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct intel_dp *intel_dp = intel_attached_dp(connector); - int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); - int max_lanes = intel_dp_max_lane_count(intel_dp); - int max_rate, mode_rate; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) @@ -236,16 +260,8 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - mode_rate = intel_dp_link_required(mode->clock, 24); - max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); - - if (mode_rate > max_rate) { - mode_rate = intel_dp_link_required(mode->clock, 18); - if (mode_rate > max_rate) - return MODE_CLOCK_HIGH; - else - mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC; - } + if (!intel_dp_adjust_dithering(intel_dp, mode, NULL)) + return MODE_CLOCK_HIGH; if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -672,7 +688,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; - int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; + int bpp; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -686,6 +702,11 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, mode->clock = intel_dp->panel_fixed_mode->clock; } + if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode)) + return false; + + bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24; + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); -- cgit v1.2.3-70-g09d2 From 58f743ee06d400a887a3e30353c69c3151eb64df Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 25 Mar 2012 20:02:55 -0400 Subject: bcma: fix build error on MIPS; implicit pcibios_enable_device The following is seen during allmodconfig builds for MIPS: drivers/bcma/driver_pci_host.c:518:2: error: implicit declaration of function 'pcibios_enable_device' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[3]: *** [drivers/bcma/driver_pci_host.o] Error 1 Most likey introduced by commit 49dc9577155576b10ff79f0c1486c816b01f58bf "bcma: add PCIe host controller" Add the header instead of implicitly assuming it will be present. Sounds like a good idea, but that alone doesn't fix anything. The real problem is that the Kconfig has settings related to whether PCI is possible, i.e. config BCMA_HOST_PCI_POSSIBLE bool depends on BCMA && PCI = y default y config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE ...but what is missing is that BCMA_DRIVER_PCI_HOSTMODE doesn't have any dependencies on the above. Add one. CC: Hauke Mehrtens CC: John W. Linville Signed-off-by: Paul Gortmaker Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/Kconfig | 2 +- drivers/bcma/driver_pci_host.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig index c1172dafdff..fb7c80fb721 100644 --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig @@ -29,7 +29,7 @@ config BCMA_HOST_PCI config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" - depends on BCMA && MIPS + depends on BCMA && MIPS && BCMA_HOST_PCI help PCI core hostmode operation (external PCI bus). diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 4e20bcfa7ec..d2097a11c3c 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -10,6 +10,7 @@ */ #include "bcma_private.h" +#include #include #include #include -- cgit v1.2.3-70-g09d2 From e2bc7c5f3cb8756865aa0ab140d2288f61599dda Mon Sep 17 00:00:00 2001 From: "Chen, Chien-Chia" Date: Thu, 29 Mar 2012 18:21:47 +0800 Subject: rt2x00: Fix rfkill_polling register function. Move rt2x00rfkill_register(rt2x00dev) to rt2x00lib_probe_dev function. It fixes of starting rfkill_poll function at the right time if sets hard rfkill block and reboot. rt2x00mac_rfkill_poll should be starting before bringing up the wireless interface. Signed-off-by: Chen, Chien-Chia Acked-by: Helmut Schaa CC: Kevin Chou Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index fc9901e027c..90cc5e77265 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1062,11 +1062,6 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); - /* - * Register the extra components. - */ - rt2x00rfkill_register(rt2x00dev); - return 0; } @@ -1210,6 +1205,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00link_register(rt2x00dev); rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); + rt2x00rfkill_register(rt2x00dev); return 0; -- cgit v1.2.3-70-g09d2 From 011afa1ed8c408d694957d2474d89dc81a60b70c Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 10 Apr 2012 12:26:11 +0530 Subject: Revert "ath9k: fix going to full-sleep on PS idle" This reverts commit c1afdaff90538ef085b756454f12b29575411214. Users have reported connection failures in 3.3.1 and suspend/resume failures in 3.4-rcX. Revert this commit for now - PS IDLE can be fixed in a clean manner later on. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 215eb2536b1..2504ab00558 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -118,15 +118,13 @@ void ath9k_ps_restore(struct ath_softc *sc) if (--sc->ps_usecount != 0) goto unlock; - if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) - goto unlock; - - if (sc->ps_idle) + if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK)) mode = ATH9K_PM_FULL_SLEEP; else if (sc->ps_enabled && !(sc->ps_flags & (PS_WAIT_FOR_BEACON | PS_WAIT_FOR_CAB | - PS_WAIT_FOR_PSPOLL_DATA))) + PS_WAIT_FOR_PSPOLL_DATA | + PS_WAIT_FOR_TX_ACK))) mode = ATH9K_PM_NETWORK_SLEEP; else goto unlock; -- cgit v1.2.3-70-g09d2 From 3ffc9cebb65f6942cd912e33e60e1f09e497e208 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 28 Mar 2012 14:55:04 -0600 Subject: gpio/sodaville: Convert sodaville driver to new irqdomain API The irqdomain api changed significantly in v3.4 which caused a build failure for this driver. Signed-off-by: Grant Likely Acked-by: Sebastian Andrzej Siewior Cc: Hans J. Koch Cc: Torben Hohn --- drivers/gpio/Kconfig | 2 +- drivers/gpio/gpio-sodaville.c | 23 ++++++++++------------- 2 files changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index edadbdad31d..e03653d6935 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -430,7 +430,7 @@ config GPIO_ML_IOH config GPIO_SODAVILLE bool "Intel Sodaville GPIO support" - depends on X86 && PCI && OF && BROKEN + depends on X86 && PCI && OF select GPIO_GENERIC select GENERIC_IRQ_CHIP help diff --git a/drivers/gpio/gpio-sodaville.c b/drivers/gpio/gpio-sodaville.c index 9ba15d31d24..031e5d24837 100644 --- a/drivers/gpio/gpio-sodaville.c +++ b/drivers/gpio/gpio-sodaville.c @@ -41,7 +41,7 @@ struct sdv_gpio_chip_data { int irq_base; void __iomem *gpio_pub_base; - struct irq_domain id; + struct irq_domain *id; struct irq_chip_generic *gc; struct bgpio_chip bgpio; }; @@ -51,10 +51,9 @@ static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct sdv_gpio_chip_data *sd = gc->private; void __iomem *type_reg; - u32 irq_offs = d->irq - sd->irq_base; u32 reg; - if (irq_offs < 8) + if (d->hwirq < 8) type_reg = sd->gpio_pub_base + GPIT1R0; else type_reg = sd->gpio_pub_base + GPIT1R1; @@ -63,11 +62,11 @@ static int sdv_gpio_pub_set_type(struct irq_data *d, unsigned int type) switch (type) { case IRQ_TYPE_LEVEL_HIGH: - reg &= ~BIT(4 * (irq_offs % 8)); + reg &= ~BIT(4 * (d->hwirq % 8)); break; case IRQ_TYPE_LEVEL_LOW: - reg |= BIT(4 * (irq_offs % 8)); + reg |= BIT(4 * (d->hwirq % 8)); break; default: @@ -91,7 +90,7 @@ static irqreturn_t sdv_gpio_pub_irq_handler(int irq, void *data) u32 irq_bit = __fls(irq_stat); irq_stat &= ~BIT(irq_bit); - generic_handle_irq(sd->irq_base + irq_bit); + generic_handle_irq(irq_find_mapping(sd->id, irq_bit)); } return IRQ_HANDLED; @@ -127,7 +126,7 @@ static int sdv_xlate(struct irq_domain *h, struct device_node *node, } static struct irq_domain_ops irq_domain_sdv_ops = { - .dt_translate = sdv_xlate, + .xlate = sdv_xlate, }; static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, @@ -149,10 +148,6 @@ static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, if (ret) goto out_free_desc; - sd->id.irq_base = sd->irq_base; - sd->id.of_node = of_node_get(pdev->dev.of_node); - sd->id.ops = &irq_domain_sdv_ops; - /* * This gpio irq controller latches level irqs. Testing shows that if * we unmask & ACK the IRQ before the source of the interrupt is gone @@ -179,7 +174,10 @@ static __devinit int sdv_register_irqsupport(struct sdv_gpio_chip_data *sd, IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); - irq_domain_add(&sd->id); + sd->id = irq_domain_add_legacy(pdev->dev.of_node, SDV_NUM_PUB_GPIOS, + sd->irq_base, 0, &irq_domain_sdv_ops, sd); + if (!sd->id) + goto out_free_irq; return 0; out_free_irq: free_irq(pdev->irq, sd); @@ -260,7 +258,6 @@ static void sdv_gpio_remove(struct pci_dev *pdev) { struct sdv_gpio_chip_data *sd = pci_get_drvdata(pdev); - irq_domain_del(&sd->id); free_irq(pdev->irq, sd); irq_free_descs(sd->irq_base, SDV_NUM_PUB_GPIOS); -- cgit v1.2.3-70-g09d2 From 078dc65e61c562e289685fe43b5ef58118e033fc Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 6 Apr 2012 20:37:43 +0800 Subject: gpio: Fix uninitialized variable bit in adp5588_irq_handler The variable 'bit' is uninitialized in the first iteration of for loop. Fix it. Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/gpio/gpio-adp5588.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c index 9ad1703d140..ae5d7f12ce6 100644 --- a/drivers/gpio/gpio-adp5588.c +++ b/drivers/gpio/gpio-adp5588.c @@ -252,7 +252,7 @@ static irqreturn_t adp5588_irq_handler(int irq, void *devid) if (ret < 0) memset(dev->irq_stat, 0, ARRAY_SIZE(dev->irq_stat)); - for (bank = 0; bank <= ADP5588_BANK(ADP5588_MAXGPIO); + for (bank = 0, bit = 0; bank <= ADP5588_BANK(ADP5588_MAXGPIO); bank++, bit = 0) { pending = dev->irq_stat[bank] & dev->irq_mask[bank]; -- cgit v1.2.3-70-g09d2 From 6270d830d030da48eddffbe31ed1e4444f203fc5 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 4 Apr 2012 02:02:58 +0200 Subject: gpio: Fix range check in of_gpio_simple_xlate() of_gpio_simple_xlate() has an off-by-one bug where it checks to see if args[0] is > ngpio instead of >=. args[0] must always be less than ngpio because it is a zero-based enumeration. Signed-off-by: Roland Stigge [grant.likely: beef up commit text] Signed-off-by: Grant Likely --- drivers/of/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index bba81216b4d..bf984b6dc47 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -140,7 +140,7 @@ int of_gpio_simple_xlate(struct gpio_chip *gc, if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) return -EINVAL; - if (gpiospec->args[0] > gc->ngpio) + if (gpiospec->args[0] >= gc->ngpio) return -EINVAL; if (flags) -- cgit v1.2.3-70-g09d2 From a65a6f14dc24a90bde3f5d0073ba2364476200bf Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 20 Mar 2012 16:59:33 +0100 Subject: USB: serial: fix race between probe and open Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [] tty_port_open+0x7c/0xd0 [ 199.698527] [] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [] tty_open+0x20c/0x510 [ 199.698546] [] chrdev_open+0xe7/0x230 [ 199.698553] [] __dentry_open+0x1f2/0x390 [ 199.698559] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [] nameidata_to_filp+0x66/0x80 [ 199.698570] [] ? cdev_put+0x20/0x20 [ 199.698576] [] do_last+0x198/0x730 [ 199.698581] [] path_openat+0xa0/0x350 [ 199.698587] [] do_filp_open+0x35/0x80 [ 199.698593] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [] ? alloc_fd+0xc0/0x100 [ 199.698605] [] ? getname_flags+0x72/0x120 [ 199.698611] [] do_sys_open+0xf0/0x1c0 [ 199.698617] [] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [] sys_open+0x2e/0x40 [ 199.698628] [] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 5413bd50078..97355a15bbe 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface, serial->attached = 1; } + /* Avoid race with tty_open and serial_install by setting the + * disconnected flag and not clearing it until all ports have been + * registered. + */ + serial->disconnected = 1; + if (get_free_serial(serial, num_ports, &minor) == NULL) { dev_err(&interface->dev, "No more free serial devices\n"); goto probe_error; @@ -1078,6 +1084,8 @@ int usb_serial_probe(struct usb_interface *interface, "continuing\n"); } + serial->disconnected = 0; + usb_serial_console_init(debug, minor); exit: -- cgit v1.2.3-70-g09d2 From bb334e90cc3a2913906665ea966abd7f462b67c2 Mon Sep 17 00:00:00 2001 From: Alex He Date: Thu, 22 Mar 2012 15:06:59 +0800 Subject: xHCI: correct to print the true HSEE of USBCMD Correct the print of HSEE of USBCMD in xhci-dbg.c. Signed-off-by: Alex He Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-dbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index e9b0f043455..4b436f5a417 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci) xhci_dbg(xhci, " Event Interrupts %s\n", (temp & CMD_EIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " Host System Error Interrupts %s\n", - (temp & CMD_EIE) ? "enabled " : "disabled"); + (temp & CMD_HSEIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " HC has %sfinished light reset\n", (temp & CMD_LRESET) ? "not " : ""); } -- cgit v1.2.3-70-g09d2 From a46c46a1d752756ba159dd454b746a3fb735c4f5 Mon Sep 17 00:00:00 2001 From: Gerard Snitselaar Date: Fri, 16 Mar 2012 11:34:11 -0700 Subject: usb: xhci: fix section mismatch in linux-next xhci_unregister_pci() is called in xhci_hcd_init(). Signed-off-by: Gerard Snitselaar Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626f..0d7b8513596 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -326,7 +326,7 @@ int __init xhci_register_pci(void) return pci_register_driver(&xhci_pci_driver); } -void __exit xhci_unregister_pci(void) +void xhci_unregister_pci(void) { pci_unregister_driver(&xhci_pci_driver); } -- cgit v1.2.3-70-g09d2 From 9a5c7d6eb9b8cc9fa1c7169ecfd96c9e267c0452 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 3 Apr 2012 14:12:55 +0530 Subject: gpio/exynos: Fix compiler warning in gpio-samsung.c file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes the following warning when "SAMSUNG EXYNOS5" is not selected: warning: ‘exynos5_gpios_1’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_2’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_3’ defined but not used [-Wunused-variable] warning: ‘exynos5_gpios_4’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat Signed-off-by: Grant Likely --- drivers/gpio/gpio-samsung.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index 46277877b7e..19d6fc0229c 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -2382,8 +2382,8 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = { #endif }; -static struct samsung_gpio_chip exynos5_gpios_1[] = { #ifdef CONFIG_ARCH_EXYNOS5 +static struct samsung_gpio_chip exynos5_gpios_1[] = { { .chip = { .base = EXYNOS5_GPA0(0), @@ -2541,11 +2541,11 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = { .to_irq = samsung_gpiolib_to_irq, }, }, -#endif }; +#endif -static struct samsung_gpio_chip exynos5_gpios_2[] = { #ifdef CONFIG_ARCH_EXYNOS5 +static struct samsung_gpio_chip exynos5_gpios_2[] = { { .chip = { .base = EXYNOS5_GPE0(0), @@ -2602,11 +2602,11 @@ static struct samsung_gpio_chip exynos5_gpios_2[] = { }, }, -#endif }; +#endif -static struct samsung_gpio_chip exynos5_gpios_3[] = { #ifdef CONFIG_ARCH_EXYNOS5 +static struct samsung_gpio_chip exynos5_gpios_3[] = { { .chip = { .base = EXYNOS5_GPV0(0), @@ -2638,11 +2638,11 @@ static struct samsung_gpio_chip exynos5_gpios_3[] = { .label = "GPV4", }, }, -#endif }; +#endif -static struct samsung_gpio_chip exynos5_gpios_4[] = { #ifdef CONFIG_ARCH_EXYNOS5 +static struct samsung_gpio_chip exynos5_gpios_4[] = { { .chip = { .base = EXYNOS5_GPZ(0), @@ -2650,8 +2650,8 @@ static struct samsung_gpio_chip exynos5_gpios_4[] = { .label = "GPZ", }, }, -#endif }; +#endif #if defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) -- cgit v1.2.3-70-g09d2 From 39ec0d38141b198f94fd19c2bb10fd7c616510d2 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Tue, 3 Apr 2012 15:03:44 +0200 Subject: spi/imx: prevent NULL pointer dereference in spi_imx_probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When no platform_data is present and either 'spi-num-chipselects' is not defined in the DT or 'cs-gpios' has less entries than 'spi-num-chipselects' specifies, the NULL platform_data pointer is being dereferenced. Signed-off-by: Lothar Waßmann Signed-off-by: Grant Likely --- drivers/spi/spi-imx.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 373f4fff935..570f22053be 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -766,8 +766,12 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) } ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs); - if (ret < 0) - num_cs = mxc_platform_info->num_chipselect; + if (ret < 0) { + if (mxc_platform_info) + num_cs = mxc_platform_info->num_chipselect; + else + return ret; + } master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data) + sizeof(int) * num_cs); @@ -784,7 +788,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) for (i = 0; i < master->num_chipselect; i++) { int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); - if (cs_gpio < 0) + if (cs_gpio < 0 && mxc_platform_info) cs_gpio = mxc_platform_info->chipselect[i]; spi_imx->chipselect[i] = cs_gpio; -- cgit v1.2.3-70-g09d2 From f84cc342b1999db11ece939e1d2bf0743eb4578b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 14:54:25 -0600 Subject: pinctrl: implement pinctrl_check_ops Most code assumes that the pinctrl ops are present. Validate this when registering a pinctrl driver. Remove the one place in the code that was checking whether one of these non-optional ops was present. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index ec3b8cc188a..df6296c5f47 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -908,10 +908,6 @@ static int pinctrl_groups_show(struct seq_file *s, void *what) const struct pinctrl_ops *ops = pctldev->desc->pctlops; unsigned selector = 0; - /* No grouping */ - if (!ops) - return 0; - mutex_lock(&pinctrl_mutex); seq_puts(s, "registered pin groups:\n"); @@ -1225,6 +1221,19 @@ static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) #endif +static int pinctrl_check_ops(struct pinctrl_dev *pctldev) +{ + const struct pinctrl_ops *ops = pctldev->desc->pctlops; + + if (!ops || + !ops->list_groups || + !ops->get_group_name || + !ops->get_group_pins) + return -EINVAL; + + return 0; +} + /** * pinctrl_register() - register a pin controller device * @pctldesc: descriptor for this pin controller @@ -1256,6 +1265,14 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, INIT_LIST_HEAD(&pctldev->gpio_ranges); pctldev->dev = dev; + /* check core ops for sanity */ + ret = pinctrl_check_ops(pctldev); + if (ret) { + pr_err("%s pinctrl ops lacks necessary functions\n", + pctldesc->name); + goto out_err; + } + /* If we're implementing pinmuxing, check the ops for sanity */ if (pctldesc->pmxops) { ret = pinmux_check_ops(pctldev); -- cgit v1.2.3-70-g09d2 From 46783150a6552f9513f08e62cfcc07125d6e502b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 10 Apr 2012 12:14:27 -0400 Subject: drm/radeon: only add the mm i2c bus if the hw_i2c module param is set It seems it can corrupt the monitor EDID in certain cases on certain boards when running sensors detect. It's rarely used anyway outside of AIW boards. http://lists.lm-sensors.org/pipermail/lm-sensors/2012-April/035847.html http://lists.freedesktop.org/archives/xorg/2011-January/052239.html Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Acked-by: Jean Delvare Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_i2c.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c index 85bcfc8923a..3edec1c198e 100644 --- a/drivers/gpu/drm/radeon/radeon_i2c.c +++ b/drivers/gpu/drm/radeon/radeon_i2c.c @@ -900,6 +900,10 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev, struct radeon_i2c_chan *i2c; int ret; + /* don't add the mm_i2c bus unless hw_i2c is enabled */ + if (rec->mm_i2c && (radeon_hw_i2c == 0)) + return NULL; + i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL); if (i2c == NULL) return NULL; -- cgit v1.2.3-70-g09d2 From 6a562e3daee217ce99fe0e31150acd89a5b22606 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 9 Apr 2012 21:10:38 +0200 Subject: Revert "drm/i915: reenable gmbus on gen3+ again" This reverts commit c3dfefa0a6d235bd465309e12f4c56ea16e71111. gmbus in 3.4 has simply too many known issues: - gmbus is too noisy, we need to rework the logging: https://bugs.freedesktop.org/show_bug.cgi?id=48248 - zero-length writes cause an OOPS, and they are userspace-triggerable: https://lkml.org/lkml/2012/3/30/176 - same for zero-length reads: https://bugs.freedesktop.org/show_bug.cgi?id=48269 We can try again for 3.5. Acked-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 601c86e664a..8fdc9570021 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -390,7 +390,7 @@ int intel_setup_gmbus(struct drm_device *dev) bus->has_gpio = intel_gpio_setup(bus, i); /* XXX force bit banging until GMBUS is fully debugged */ - if (bus->has_gpio && IS_GEN2(dev)) + if (bus->has_gpio) bus->force_bit = true; } -- cgit v1.2.3-70-g09d2 From 27c1cbd06a7620b354cbb363834f3bb8df4f410d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 9 Apr 2012 13:59:46 +0100 Subject: drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g The 845g shares the errata with i830 whereby executing a command within 2 cachelines of the end of the ringbuffer may cause a GPU hang. Signed-off-by: Chris Wilson Cc: stable@kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_ringbuffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index e25581a9f60..f75806e5bff 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1038,7 +1038,7 @@ int intel_init_ring_buffer(struct drm_device *dev, * of the buffer. */ ring->effective_size = ring->size; - if (IS_I830(ring->dev)) + if (IS_I830(ring->dev) || IS_845G(ring->dev)) ring->effective_size -= 128; return 0; -- cgit v1.2.3-70-g09d2 From 80e829fade4eea5f07c410df6a551c42e2d0ca9c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 31 Mar 2012 11:21:57 +0200 Subject: drm/i915: implement ColorBlt w/a According to an internal workaround master list, we need to set bit 5 of register 9400 to avoid issues with color blits. Testing shows that this seems to fix the blitter hangs when fbc is enabled on snb, thanks to Chris Wilson for figuring this out. Tested-by: Chris Wilson Tested-by: Michael "brot" Groh Acked-by: Ben Widawsky Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/intel_display.c | 4 ++++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2abf4eb9403..b4bb1ef77dd 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3728,6 +3728,9 @@ #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 +#define GEN6_UCGCTL1 0x9400 +# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) + #define GEN6_UCGCTL2 0x9404 # define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f446e66cbda..bae38acf44d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8556,6 +8556,10 @@ static void gen6_init_clock_gating(struct drm_device *dev) I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); + I915_WRITE(GEN6_UCGCTL1, + I915_READ(GEN6_UCGCTL1) | + GEN6_BLBUNIT_CLOCK_GATE_DISABLE); + /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock * gating disable must be set. Failure to set it results in * flickering pixels due to Z write ordering failures after -- cgit v1.2.3-70-g09d2 From cd10502b8276b0486850685383243cbd26d50c8d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 11 Apr 2012 14:28:04 +0200 Subject: [S390] drivers/s390/block/dasd_eckd.c: add missing dasd_sfree_request Extend some error paths to call dasd_sfree_request as done earlier in the function. The error-handling code is also moved to the end of the function. Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_eckd.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index c21871a4e73..bc2e8a7c265 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -2844,6 +2844,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( sector_t recid, trkid; unsigned int offs; unsigned int count, count_to_trk_end; + int ret; basedev = block->base; if (rq_data_dir(req) == READ) { @@ -2884,8 +2885,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( itcw = itcw_init(cqr->data, itcw_size, itcw_op, 0, ctidaw, 0); if (IS_ERR(itcw)) { - dasd_sfree_request(cqr, startdev); - return ERR_PTR(-EINVAL); + ret = -EINVAL; + goto out_error; } cqr->cpaddr = itcw_get_tcw(itcw); if (prepare_itcw(itcw, first_trk, last_trk, @@ -2897,8 +2898,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( /* Clock not in sync and XRC is enabled. * Try again later. */ - dasd_sfree_request(cqr, startdev); - return ERR_PTR(-EAGAIN); + ret = -EAGAIN; + goto out_error; } len_to_track_end = 0; /* @@ -2937,8 +2938,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( tidaw_flags = 0; last_tidaw = itcw_add_tidaw(itcw, tidaw_flags, dst, part_len); - if (IS_ERR(last_tidaw)) - return ERR_PTR(-EINVAL); + if (IS_ERR(last_tidaw)) { + ret = -EINVAL; + goto out_error; + } dst += part_len; } } @@ -2947,8 +2950,10 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( dst = page_address(bv->bv_page) + bv->bv_offset; last_tidaw = itcw_add_tidaw(itcw, 0x00, dst, bv->bv_len); - if (IS_ERR(last_tidaw)) - return ERR_PTR(-EINVAL); + if (IS_ERR(last_tidaw)) { + ret = -EINVAL; + goto out_error; + } } } last_tidaw->flags |= TIDAW_FLAGS_LAST; @@ -2968,6 +2973,9 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; return cqr; +out_error: + dasd_sfree_request(cqr, startdev); + return ERR_PTR(ret); } static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev, -- cgit v1.2.3-70-g09d2 From dae1df42f544ce3969d437dfa835169210593240 Mon Sep 17 00:00:00 2001 From: Dennis Chen Date: Wed, 11 Apr 2012 14:28:05 +0200 Subject: [S390] s390/char/vmur.c: fix memory leak This patch is used to fix a memory leak issue in s390/char/vmur.c. A character device instance is allocated by cdev_alloc, the cdev_del will not free that space if cdev_init is applied before. Signed-off-by: Dennis Chen Signed-off-by: Martin Schwidefsky --- drivers/s390/char/vmur.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c index 85f4a9a5d12..73bef0bd394 100644 --- a/drivers/s390/char/vmur.c +++ b/drivers/s390/char/vmur.c @@ -903,7 +903,7 @@ static int ur_set_online(struct ccw_device *cdev) goto fail_urdev_put; } - cdev_init(urd->char_device, &ur_fops); + urd->char_device->ops = &ur_fops; urd->char_device->dev = MKDEV(major, minor); urd->char_device->owner = ur_fops.owner; -- cgit v1.2.3-70-g09d2 From 4e833c0b87a30798e67f06120cecebef6ee9644c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 15 Mar 2012 16:37:08 +0200 Subject: xhci: don't re-enable IE constantly While we're at that, define IMAN bitfield to aid readability. The interrupt enable bit should be set once on driver init, and we shouldn't need to continually re-enable it. Commit c21599a3 introduced a read of the irq_pending register, and that allows us to preserve the state of the IE bit. Before that commit, we were blindly writing 0x3 to the register. This patch should be backported to kernels as old as 2.6.36, or ones that contain the commit c21599a36165dbc78b380846b254017a548b9de5 "USB: xhci: Reduce reads and writes of interrupter registers". Signed-off-by: Felipe Balbi Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/host/xhci.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6bd9d53062e..5ddc4ae8549 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2417,7 +2417,7 @@ hw_died: u32 irq_pending; /* Acknowledge the PCI interrupt */ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - irq_pending |= 0x3; + irq_pending |= IMAN_IP; xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 91074fdab3e..3d69c4b2b54 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -205,6 +205,10 @@ struct xhci_op_regs { #define CMD_PM_INDEX (1 << 11) /* bits 12:31 are reserved (and should be preserved on writes). */ +/* IMAN - Interrupt Management Register */ +#define IMAN_IP (1 << 1) +#define IMAN_IE (1 << 0) + /* USBSTS - USB status - status bitmasks */ /* HC not running - set to 1 when run/stop bit is cleared. */ #define STS_HALT XHCI_STS_HALT -- cgit v1.2.3-70-g09d2 From 5af98bb06dee79d28c805f9fd0805ce791121784 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 12:58:20 -0700 Subject: xhci: Warn when hosts don't halt. Eric Fu reports a problem with his VIA host controller fetching a zeroed event ring pointer on resume from suspend. The host should have been halted, but we can't be sure because that code ignores the return value from xhci_halt(). Print a warning when the host controller refuses to halt within XHCI_MAX_HALT_USEC (currently 16 seconds). (Update: it turns out that the VIA host controller is reporting a halted state when it fetches the zeroed event ring pointer. However, we still need this warning for other host controllers.) Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e1963d4a430..f68bc15d21e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci) STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) xhci->xhc_state |= XHCI_STATE_HALTED; + else + xhci_warn(xhci, "Host not halted after %u microseconds.\n", + XHCI_MAX_HALT_USEC); return ret; } -- cgit v1.2.3-70-g09d2 From 159e1fcc9a60fc7daba23ee8fcdb99799de3fe84 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:09:39 -0700 Subject: xhci: Don't write zeroed pointers to xHC registers. When xhci_mem_cleanup() is called, we can't be sure if the xHC is actually halted. We can ask the xHC to halt by writing to the RUN bit in the command register, but that might timeout due to a HW hang. If the host controller is still running, we should not write zeroed values to the event ring dequeue pointers or base tables, the DCBAA pointers, or the command ring pointers. Eric Fu reports his VIA VL800 host accesses the event ring pointers after a failed register restore on resume from suspend. The hypothesis is that the host never actually halted before the register write to change the event ring pointer to zero. Remove all writes of zeroed values to pointer registers in xhci_mem_cleanup(). Instead, make all callers of the function reset the host controller first, which will reset those registers to zero. xhci_mem_init() is the only caller that doesn't first halt and reset the host controller before calling xhci_mem_cleanup(). This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cae4c6f2845..68eaa908ac8 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - if (xhci->ir_set) { - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); - } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) dma_free_coherent(&pdev->dev, size, @@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->medium_streams_pool = NULL; xhci_dbg(xhci, "Freed medium stream array pool\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); @@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) fail: xhci_warn(xhci, "Couldn't initialize memory\n"); + xhci_halt(xhci); + xhci_reset(xhci); xhci_mem_cleanup(xhci); return -ENOMEM; } -- cgit v1.2.3-70-g09d2 From fb3d85bc7193f23c9a564502df95564c49a32c91 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:27:39 -0700 Subject: xhci: Restore event ring dequeue pointer on resume. The xhci_save_registers() function saved the event ring dequeue pointer in the s3 register structure, but xhci_restore_registers() never restored it. No other code in the xHCI successful resume path would ever restore it either. Fix that. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f68bc15d21e..d2222dc2f82 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -684,6 +684,7 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) -- cgit v1.2.3-70-g09d2 From c7713e736526d8c9f6f87716fb90562a8ffaff2c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 16 Mar 2012 13:19:35 -0700 Subject: xhci: Fix register save/restore order. The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering that the xHCI registers are saved and restored in. It moves the interrupt pending (IMAN) and interrupt control (IMOD) registers to be saved and restored last. I believe that's because the host controller may attempt to fetch the event ring table when interrupts are re-enabled. Therefore we need to restore the event ring registers before we re-enable interrupts. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Sarah Sharp Tested-by: Elric Fu Cc: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d2222dc2f82..36641a7f237 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -667,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); - xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); } static void xhci_restore_registers(struct xhci_hcd *xhci) @@ -680,11 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); - xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); - xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); + xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) -- cgit v1.2.3-70-g09d2 From d8aec3dbdfd02627e198e7956ab4aaeba2a349fa Mon Sep 17 00:00:00 2001 From: Elric Fu Date: Mon, 26 Mar 2012 21:16:02 +0800 Subject: USB: fix bug of device descriptor got from superspeed device When the Seagate Goflex USB3.0 device is attached to VIA xHCI host, sometimes the device will downgrade mode to high speed. By the USB analyzer, I found the device finished the link training process and worked at superspeed mode. But the device descriptor got from the device shows the device works at 2.1. It is very strange and seems like the device controller of Seagate Goflex has a little confusion. The first 8 bytes of device descriptor should be: 12 01 00 03 00 00 00 09 But the first 8 bytes of wrong device descriptor are: 12 01 10 02 00 00 00 40 The wrong device descriptor caused the initialization of mass storage failed. After a while, the device would be recognized as a high speed device and works fine. This patch will warm reset the device to fix the issue after finding the bcdUSB field of device descriptor isn't 0x0300 but the speed mode of device is superspeed. This patch should be backported to kernels as old as 3.2, or ones that contain the commit 75d7cf72ab9fa01dc70877aa5c68e8ef477229dc "usbcore: refine warm reset logic". Signed-off-by: Elric Fu Acked-by: Andiry Xu Acked-by: Sergei Shtylyov Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28664eb7f55..a2aa9d652c6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; + /* + * Some superspeed devices have finished the link training process + * and attached to a superspeed hub port, but the device descriptor + * got from those devices show they aren't superspeed devices. Warm + * reset the port attached by the devices can fix them. + */ + if ((udev->speed == USB_SPEED_SUPER) && + (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) { + dev_err(&udev->dev, "got a wrong device descriptor, " + "warm reset device\n"); + hub_port_reset(hub, port1, udev, + HUB_BH_RESET_TIME, true); + retval = -EINVAL; + goto fail; + } + if (udev->descriptor.bMaxPacketSize0 == 0xff || udev->speed == USB_SPEED_SUPER) i = 512; -- cgit v1.2.3-70-g09d2 From 457a4f61f9bfc3ae76e5b49f30f25d86bb696f67 Mon Sep 17 00:00:00 2001 From: Elric Fu Date: Thu, 29 Mar 2012 15:47:50 +0800 Subject: xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI host The suspend operation of VIA xHCI host have some issues and hibernate operation works fine, so The XHCI_RESET_ON_RESUME quirk is added for it. This patch should base on "xHCI: Don't write zeroed pointer to xHC registers" that is released by Sarah. Otherwise, the host system error will ocurr in the hibernate operation process. This should be backported to stable kernels as old as 2.6.37, that contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by: Elric Fu Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 0d7b8513596..7a856a767e7 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; } /* called during probe() after chip reset completes */ -- cgit v1.2.3-70-g09d2 From 3fc8206d3dca1550eb0a1f6e2a350881835954ba Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 28 Mar 2012 10:30:26 +0300 Subject: xHCI: use gfp flags from caller instead of GFP_ATOMIC The caller is allowed to specify the GFP flags for these functions. We should prefer their flags unless we have good reason. For example, if we take a spin_lock ourselves we'd need to use GFP_ATOMIC. But in this case it's safe to use the callers GFP flags. The callers all pass GFP_ATOMIC here, so this change doesn't affect how the kernel behaves but we may add other callers later and this is a cleanup. Signed-off-by: Dan Carpenter Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5ddc4ae8549..3d9422f16a2 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } - return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index); } /* @@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free; - return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index); } /**** Command Ring Operations ****/ -- cgit v1.2.3-70-g09d2 From 95018a53f7653e791bba1f54c8d75d9cb700d1bd Mon Sep 17 00:00:00 2001 From: Alex He Date: Fri, 30 Mar 2012 10:21:38 +0800 Subject: xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMI Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable bits will be cleared to zero and flag bits 29:31 are also cleared to zero. Other bits should be presvered as Table 146. This patch should be backported to kernels as old as 2.6.31. Signed-off-by: Alex He Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 10 +++++++--- drivers/usb/host/xhci-ext-caps.h | 5 +++-- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 11de5f1be98..32dada8c8b4 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) } } - /* Disable any BIOS SMIs */ - writel(XHCI_LEGACY_DISABLE_SMI, - base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + /* Mask off (turn off) any enabled SMIs */ + val &= XHCI_LEGACY_DISABLE_SMI; + /* Mask all SMI events bits, RW1C */ + val |= XHCI_LEGACY_SMI_EVENTS; + /* Disable any BIOS SMIs and clear all SMI events*/ + writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index c7f33123d4c..377f4242dab 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -62,8 +62,9 @@ /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) -/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ -#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) +/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ +#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) +#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) -- cgit v1.2.3-70-g09d2 From a7959c1394d4126a70a53b914ce4105f5173d0aa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 19 Mar 2012 15:44:31 -0500 Subject: rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger Cc: Stable [This version good for 3.3+ - different patch for 3.2 - 2.6.39] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/usb.c | 34 ++++++++++++++++------------------ drivers/net/wireless/rtlwifi/wifi.h | 6 +++++- 2 files changed, 21 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 2e1e352864b..d04dbda13f5 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -124,46 +124,38 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, return status; } -static u32 _usb_read_sync(struct usb_device *udev, u32 addr, u16 len) +static u32 _usb_read_sync(struct rtl_priv *rtlpriv, u32 addr, u16 len) { + struct device *dev = rtlpriv->io.dev; + struct usb_device *udev = to_usb_device(dev); u8 request; u16 wvalue; u16 index; - u32 *data; - u32 ret; + __le32 *data = &rtlpriv->usb_data[rtlpriv->usb_data_index]; - data = kmalloc(sizeof(u32), GFP_KERNEL); - if (!data) - return -ENOMEM; request = REALTEK_USB_VENQT_CMD_REQ; index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */ wvalue = (u16)addr; _usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len); - ret = le32_to_cpu(*data); - kfree(data); - return ret; + if (++rtlpriv->usb_data_index >= RTL_USB_MAX_RX_COUNT) + rtlpriv->usb_data_index = 0; + return le32_to_cpu(*data); } static u8 _usb_read8_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return (u8)_usb_read_sync(to_usb_device(dev), addr, 1); + return (u8)_usb_read_sync(rtlpriv, addr, 1); } static u16 _usb_read16_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return (u16)_usb_read_sync(to_usb_device(dev), addr, 2); + return (u16)_usb_read_sync(rtlpriv, addr, 2); } static u32 _usb_read32_sync(struct rtl_priv *rtlpriv, u32 addr) { - struct device *dev = rtlpriv->io.dev; - - return _usb_read_sync(to_usb_device(dev), addr, 4); + return _usb_read_sync(rtlpriv, addr, 4); } static void _usb_write_async(struct usb_device *udev, u32 addr, u32 val, @@ -955,6 +947,11 @@ int __devinit rtl_usb_probe(struct usb_interface *intf, return -ENOMEM; } rtlpriv = hw->priv; + rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32), + GFP_KERNEL); + if (!rtlpriv->usb_data) + return -ENOMEM; + rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); SET_IEEE80211_DEV(hw, &intf->dev); udev = interface_to_usbdev(intf); @@ -1025,6 +1022,7 @@ void rtl_usb_disconnect(struct usb_interface *intf) /* rtl_deinit_rfkill(hw); */ rtl_usb_deinit(hw); rtl_deinit_core(hw); + kfree(rtlpriv->usb_data); rtlpriv->cfg->ops->deinit_sw_leds(hw); rtlpriv->cfg->ops->deinit_sw_vars(hw); _rtl_usb_io_handler_release(hw); diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index b591614c3b9..28ebc69218a 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -67,7 +67,7 @@ #define QOS_QUEUE_NUM 4 #define RTL_MAC80211_NUM_QUEUE 5 #define REALTEK_USB_VENQT_MAX_BUF_SIZE 254 - +#define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 @@ -1629,6 +1629,10 @@ struct rtl_priv { interface or hardware */ unsigned long status; + /* data buffer pointer for USB reads */ + __le32 *usb_data; + int usb_data_index; + /*This must be the last item so that it points to the data allocated beyond this structure like: -- cgit v1.2.3-70-g09d2 From 673f7786e205c87b5d978c62827b9a66d097bebb Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 26 Mar 2012 10:48:20 -0500 Subject: rtlwifi: Add missing DMA buffer unmapping for PCI drivers In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These are caused by the DMA buffers used for beacons never being unmapped. This bug was also reported at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618 Reported-and-Tested-by: Da Xue Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 07dd38efe62..288b035a357 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -912,8 +912,13 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); ring = &rtlpci->tx_ring[BEACON_QUEUE]; pskb = __skb_dequeue(&ring->queue); - if (pskb) + if (pskb) { + struct rtl_tx_desc *entry = &ring->desc[ring->idx]; + pci_unmap_single(rtlpci->pdev, rtlpriv->cfg->ops->get_desc( + (u8 *) entry, true, HW_DESC_TXBUFF_ADDR), + pskb->len, PCI_DMA_TODEVICE); kfree_skb(pskb); + } /*NB: the beacon data buffer must be 32-bit aligned. */ pskb = ieee80211_beacon_get(hw, mac->vif); -- cgit v1.2.3-70-g09d2 From f57f9c167af7cb3fd315e6a8ebe194a8aea0832a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 11 Apr 2012 09:39:02 -0700 Subject: drm/i915: make rc6 module parameter read-only People have been getting confused and thinking this is a runtime control. Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index dfa55e7478f..ae8a64f9f84 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -64,7 +64,7 @@ MODULE_PARM_DESC(semaphores, "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))"); int i915_enable_rc6 __read_mostly = -1; -module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); +module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400); MODULE_PARM_DESC(i915_enable_rc6, "Enable power-saving render C-state 6. " "Different stages can be selected via bitmask values " -- cgit v1.2.3-70-g09d2 From d48fc63f6f3f485ed5aa9cf019d8e8e3a7d10263 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 11 Apr 2012 23:49:16 +0200 Subject: Revert "clocksource: Load the ACPI PM clocksource asynchronously" This reverts commit b519508298e0292e1771eecf14aaf67755adc39d. The reason for this revert is that making the frequency verification preemptible and interruptible is not working reliably. Michaels machine failed to use PM-timer with the message: PM-Timer running at invalid rate: 113% of normal - aborting. That's not a surprise as the frequency verification does rely on interrupts being disabled. With a async scheduled thread there is no guarantee to achieve the same result. Also some driver might fiddle with the CTC channel 2 during the verification period, which makes the result even more random and unpredictable. This can be solved by using the same mechanism as we use in the deferred TSC validation code, but that only will work if we verified a working HPET _BEFORE_ trying to do the PM-Timer lazy validation. So for now reverting is the safe option. Bisected-by: Michael Witten Cc: Arjan van de Ven Cc: Arjan van de Ven Cc: John Stultz Cc: Len Brown LKML-Reference: Signed-off-by: Thomas Gleixner --- drivers/clocksource/acpi_pm.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 82e882028fc..6b5cf02c35c 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -23,7 +23,6 @@ #include #include #include -#include #include /* @@ -180,15 +179,17 @@ static int verify_pmtmr_rate(void) /* Number of reads we try to get two different values */ #define ACPI_PM_READ_CHECKS 10000 -static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie) +static int __init init_acpi_pm_clocksource(void) { cycle_t value1, value2; unsigned int i, j = 0; + if (!pmtmr_ioport) + return -ENODEV; /* "verify" this timing source: */ for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) { - usleep_range(100 * j, 100 * j + 100); + udelay(100 * j); value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm); for (i = 0; i < ACPI_PM_READ_CHECKS; i++) { value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm); @@ -202,34 +203,25 @@ static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); pmtmr_ioport = 0; - return; + return -EINVAL; } if (i == ACPI_PM_READ_CHECKS) { printk(KERN_INFO "PM-Timer failed consistency check " " (0x%#llx) - aborting.\n", value1); pmtmr_ioport = 0; - return; + return -ENODEV; } } if (verify_pmtmr_rate() != 0){ pmtmr_ioport = 0; - return; + return -ENODEV; } - clocksource_register_hz(&clocksource_acpi_pm, + return clocksource_register_hz(&clocksource_acpi_pm, PMTMR_TICKS_PER_SEC); } -static int __init init_acpi_pm_clocksource(void) -{ - if (!pmtmr_ioport) - return -ENODEV; - - async_schedule(acpi_pm_clocksource_async, NULL); - return 0; -} - /* We use fs_initcall because we want the PCI fixups to have run * but we still need to load before device_initcall */ -- cgit v1.2.3-70-g09d2 From 0e3d0f3d960bf5b895adcf9ffc79d2077f1411d5 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 20:55:18 -0700 Subject: Input: da9052 - fix memory leak in da9052_onkey_probe() If, in drivers/input/misc/da9052_onkey.c::da9052_onkey_probe(), the call to either kzalloc() or input_allocate_device() fails then we will return -ENOMEM from the function without freeing the other allocation that may have succeeded, thus we leak either the memory allocated for 'onkey' or the memory allocated for 'input_dev' if one succeeds and the other fails. Fix that by jumping to the 'err_free_mem' label at the end of the function that properly cleans up rather than returning directly. Signed-off-by: Jesper Juhl Signed-off-by: Dmitry Torokhov --- drivers/input/misc/da9052_onkey.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c index 34aebb8cd08..3c843cd725f 100644 --- a/drivers/input/misc/da9052_onkey.c +++ b/drivers/input/misc/da9052_onkey.c @@ -95,7 +95,8 @@ static int __devinit da9052_onkey_probe(struct platform_device *pdev) input_dev = input_allocate_device(); if (!onkey || !input_dev) { dev_err(&pdev->dev, "Failed to allocate memory\n"); - return -ENOMEM; + error = -ENOMEM; + goto err_free_mem; } onkey->input = input_dev; -- cgit v1.2.3-70-g09d2 From f9309d1bf220122659328040db47eede32514656 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:22 +0900 Subject: drm/exynos: remove unnecessary type conversion of hdmi and mixer When the void pointer type variable is assigned to the specific pointer type variable, don't need to do type conversion. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 22 +++++++++++----------- drivers/gpu/drm/exynos/exynos_mixer.c | 12 +++++------- 2 files changed, 16 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 575a8cbd353..0a713174535 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1194,7 +1194,7 @@ static int hdmi_conf_index(struct hdmi_context *hdata, static bool hdmi_is_connected(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; u32 val = hdmi_reg_read(hdata, HDMI_HPD_STATUS); if (val) @@ -1207,7 +1207,7 @@ static int hdmi_get_edid(void *ctx, struct drm_connector *connector, u8 *edid, int len) { struct edid *raw_edid; - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1275,7 +1275,7 @@ static int hdmi_v14_check_timing(struct fb_videomode *check_timing) static int hdmi_check_timing(void *ctx, void *timing) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; struct fb_videomode *check_timing = timing; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1914,7 +1914,7 @@ static void hdmi_mode_fixup(void *ctx, struct drm_connector *connector, struct drm_display_mode *adjusted_mode) { struct drm_display_mode *m; - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; int index; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1951,7 +1951,7 @@ static void hdmi_mode_fixup(void *ctx, struct drm_connector *connector, static void hdmi_mode_set(void *ctx, void *mode) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; int conf_idx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1974,7 +1974,7 @@ static void hdmi_get_max_resol(void *ctx, unsigned int *width, static void hdmi_commit(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -1985,7 +1985,7 @@ static void hdmi_commit(void *ctx) static void hdmi_disable(void *ctx) { - struct hdmi_context *hdata = (struct hdmi_context *)ctx; + struct hdmi_context *hdata = ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); @@ -2020,7 +2020,7 @@ static void hdmi_hotplug_func(struct work_struct *work) static irqreturn_t hdmi_irq_handler(int irq, void *arg) { struct exynos_drm_hdmi_context *ctx = arg; - struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx; + struct hdmi_context *hdata = ctx->ctx; u32 intc_flag; intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG); @@ -2173,7 +2173,7 @@ static int hdmi_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("%s\n", __func__); - hdmi_resource_poweroff((struct hdmi_context *)ctx->ctx); + hdmi_resource_poweroff(ctx->ctx); return 0; } @@ -2184,7 +2184,7 @@ static int hdmi_runtime_resume(struct device *dev) DRM_DEBUG_KMS("%s\n", __func__); - hdmi_resource_poweron((struct hdmi_context *)ctx->ctx); + hdmi_resource_poweron(ctx->ctx); return 0; } @@ -2351,7 +2351,7 @@ err_data: static int __devexit hdmi_remove(struct platform_device *pdev) { struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx; + struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 4d5f41e1952..495a7afea96 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -771,8 +771,7 @@ static void mixer_finish_pageflip(struct drm_device *drm_dev, int crtc) static irqreturn_t mixer_irq_handler(int irq, void *arg) { struct exynos_drm_hdmi_context *drm_hdmi_ctx = arg; - struct mixer_context *ctx = - (struct mixer_context *)drm_hdmi_ctx->ctx; + struct mixer_context *ctx = drm_hdmi_ctx->ctx; struct mixer_resources *res = &ctx->mixer_res; u32 val, val_base; @@ -902,7 +901,7 @@ static int mixer_runtime_resume(struct device *dev) DRM_DEBUG_KMS("resume - start\n"); - mixer_resource_poweron((struct mixer_context *)ctx->ctx); + mixer_resource_poweron(ctx->ctx); return 0; } @@ -913,7 +912,7 @@ static int mixer_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("suspend - start\n"); - mixer_resource_poweroff((struct mixer_context *)ctx->ctx); + mixer_resource_poweroff(ctx->ctx); return 0; } @@ -926,8 +925,7 @@ static const struct dev_pm_ops mixer_pm_ops = { static int __devinit mixer_resources_init(struct exynos_drm_hdmi_context *ctx, struct platform_device *pdev) { - struct mixer_context *mixer_ctx = - (struct mixer_context *)ctx->ctx; + struct mixer_context *mixer_ctx = ctx->ctx; struct device *dev = &pdev->dev; struct mixer_resources *mixer_res = &mixer_ctx->mixer_res; struct resource *res; @@ -1093,7 +1091,7 @@ static int mixer_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct exynos_drm_hdmi_context *drm_hdmi_ctx = platform_get_drvdata(pdev); - struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx; + struct mixer_context *ctx = drm_hdmi_ctx->ctx; dev_info(dev, "remove successful\n"); -- cgit v1.2.3-70-g09d2 From 46da222be7873bd1c79fa110d6988a2b826f7dee Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:23 +0900 Subject: drm/exynos: remove unused codes in hdmi and mixer Some members in struct mixer_context aren't used and the define HDMI_OVERLAY_NUMBER is unused in hdmi driver, remove them. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 1 - drivers/gpu/drm/exynos/exynos_mixer.c | 3 --- 2 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 0a713174535..340424f27fe 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -40,7 +40,6 @@ #include "exynos_hdmi.h" -#define HDMI_OVERLAY_NUMBER 3 #define MAX_WIDTH 1920 #define MAX_HEIGHT 1080 #define get_hdmi_context(dev) platform_get_drvdata(to_platform_device(dev)) diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 495a7afea96..baad0dde1ac 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -75,13 +75,10 @@ struct mixer_resources { }; struct mixer_context { - struct fb_videomode *default_timing; unsigned int default_win; - unsigned int default_bpp; unsigned int irq; int pipe; bool interlace; - bool vp_enabled; struct mixer_resources mixer_res; struct hdmi_win_data win_data[HDMI_OVERLAY_NUMBER]; -- cgit v1.2.3-70-g09d2 From a634dd54c05636a89a272e27e59118374065975e Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:24 +0900 Subject: drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR HDMI_OVERLAY_NUMBER is specific of mixer driver and be used "windows layer" term in exynos user manaual, so rename it. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index baad0dde1ac..9c99514eefb 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -37,7 +37,7 @@ #include "exynos_drm_drv.h" #include "exynos_drm_hdmi.h" -#define HDMI_OVERLAY_NUMBER 3 +#define MIXER_WIN_NR 3 #define get_mixer_context(dev) platform_get_drvdata(to_platform_device(dev)) @@ -81,7 +81,7 @@ struct mixer_context { bool interlace; struct mixer_resources mixer_res; - struct hdmi_win_data win_data[HDMI_OVERLAY_NUMBER]; + struct hdmi_win_data win_data[MIXER_WIN_NR]; }; static const u8 filter_y_horiz_tap8[] = { @@ -642,7 +642,7 @@ static void mixer_win_mode_set(void *ctx, if (win == DEFAULT_ZPOS) win = mixer_ctx->default_win; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } @@ -682,7 +682,7 @@ static void mixer_win_commit(void *ctx, int zpos) if (win == DEFAULT_ZPOS) win = mixer_ctx->default_win; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } @@ -705,7 +705,7 @@ static void mixer_win_disable(void *ctx, int zpos) if (win == DEFAULT_ZPOS) win = mixer_ctx->default_win; - if (win < 0 || win > HDMI_OVERLAY_NUMBER) { + if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); return; } -- cgit v1.2.3-70-g09d2 From a2ee151b6b6863d108552de82e02b77166ca23a8 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:25 +0900 Subject: drm/exynos: use define instead of default_win member in struct mixer_context The default_win member in struct mixer_context isn't change its value after initialized to 0, so it's better using to define. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_mixer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 9c99514eefb..563092e2388 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -38,6 +38,7 @@ #include "exynos_drm_hdmi.h" #define MIXER_WIN_NR 3 +#define MIXER_DEFAULT_WIN 0 #define get_mixer_context(dev) platform_get_drvdata(to_platform_device(dev)) @@ -75,7 +76,6 @@ struct mixer_resources { }; struct mixer_context { - unsigned int default_win; unsigned int irq; int pipe; bool interlace; @@ -640,7 +640,7 @@ static void mixer_win_mode_set(void *ctx, win = overlay->zpos; if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); @@ -680,7 +680,7 @@ static void mixer_win_commit(void *ctx, int zpos) DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win); if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); @@ -703,7 +703,7 @@ static void mixer_win_disable(void *ctx, int zpos) DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win); if (win == DEFAULT_ZPOS) - win = mixer_ctx->default_win; + win = MIXER_DEFAULT_WIN; if (win < 0 || win > MIXER_WIN_NR) { DRM_ERROR("overlay plane[%d] is wrong\n", win); -- cgit v1.2.3-70-g09d2 From 578b6065adc8805a8774e4bf3145e18de123f8b2 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:26 +0900 Subject: drm/exynos: fix struct for operation callback functions to driver name The mixer driver and hdmi driver have each operation callback functions and they is registered to hdmi common driver. Their struct names in hdmi common driver include display, manager and overlay. It confuses to appear whose operation and two driver cannot register same operation callback functions at the same time. Use their struct names to driver name. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 92 ++++++++++++++------------------ drivers/gpu/drm/exynos/exynos_drm_hdmi.h | 23 ++++---- drivers/gpu/drm/exynos/exynos_hdmi.c | 19 ++++--- drivers/gpu/drm/exynos/exynos_mixer.c | 7 ++- 4 files changed, 62 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 14eb26b0ba1..348048b766a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -30,9 +30,8 @@ struct drm_hdmi_context, subdrv); /* these callback points shoud be set by specific drivers. */ -static struct exynos_hdmi_display_ops *hdmi_display_ops; -static struct exynos_hdmi_manager_ops *hdmi_manager_ops; -static struct exynos_hdmi_overlay_ops *hdmi_overlay_ops; +static struct exynos_hdmi_ops *hdmi_ops; +static struct exynos_mixer_ops *mixer_ops; struct drm_hdmi_context { struct exynos_drm_subdrv subdrv; @@ -40,31 +39,20 @@ struct drm_hdmi_context { struct exynos_drm_hdmi_context *mixer_ctx; }; -void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops - *display_ops) +void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops) { DRM_DEBUG_KMS("%s\n", __FILE__); - if (display_ops) - hdmi_display_ops = display_ops; + if (ops) + hdmi_ops = ops; } -void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops - *manager_ops) +void exynos_mixer_ops_register(struct exynos_mixer_ops *ops) { DRM_DEBUG_KMS("%s\n", __FILE__); - if (manager_ops) - hdmi_manager_ops = manager_ops; -} - -void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops - *overlay_ops) -{ - DRM_DEBUG_KMS("%s\n", __FILE__); - - if (overlay_ops) - hdmi_overlay_ops = overlay_ops; + if (ops) + mixer_ops = ops; } static bool drm_hdmi_is_connected(struct device *dev) @@ -73,8 +61,8 @@ static bool drm_hdmi_is_connected(struct device *dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->is_connected) - return hdmi_display_ops->is_connected(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->is_connected) + return hdmi_ops->is_connected(ctx->hdmi_ctx->ctx); return false; } @@ -86,9 +74,9 @@ static int drm_hdmi_get_edid(struct device *dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->get_edid) - return hdmi_display_ops->get_edid(ctx->hdmi_ctx->ctx, - connector, edid, len); + if (hdmi_ops && hdmi_ops->get_edid) + return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid, + len); return 0; } @@ -99,9 +87,8 @@ static int drm_hdmi_check_timing(struct device *dev, void *timing) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->check_timing) - return hdmi_display_ops->check_timing(ctx->hdmi_ctx->ctx, - timing); + if (hdmi_ops && hdmi_ops->check_timing) + return hdmi_ops->check_timing(ctx->hdmi_ctx->ctx, timing); return 0; } @@ -112,8 +99,8 @@ static int drm_hdmi_power_on(struct device *dev, int mode) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_display_ops && hdmi_display_ops->power_on) - return hdmi_display_ops->power_on(ctx->hdmi_ctx->ctx, mode); + if (hdmi_ops && hdmi_ops->power_on) + return hdmi_ops->power_on(ctx->hdmi_ctx->ctx, mode); return 0; } @@ -134,9 +121,9 @@ static int drm_hdmi_enable_vblank(struct device *subdrv_dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->enable_vblank) - return hdmi_overlay_ops->enable_vblank(ctx->mixer_ctx->ctx, - manager->pipe); + if (mixer_ops && mixer_ops->enable_vblank) + return mixer_ops->enable_vblank(ctx->mixer_ctx->ctx, + manager->pipe); return 0; } @@ -147,8 +134,8 @@ static void drm_hdmi_disable_vblank(struct device *subdrv_dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->disable_vblank) - return hdmi_overlay_ops->disable_vblank(ctx->mixer_ctx->ctx); + if (mixer_ops && mixer_ops->disable_vblank) + return mixer_ops->disable_vblank(ctx->mixer_ctx->ctx); } static void drm_hdmi_mode_fixup(struct device *subdrv_dev, @@ -160,9 +147,9 @@ static void drm_hdmi_mode_fixup(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->mode_fixup) - hdmi_manager_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector, - mode, adjusted_mode); + if (hdmi_ops && hdmi_ops->mode_fixup) + hdmi_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector, mode, + adjusted_mode); } static void drm_hdmi_mode_set(struct device *subdrv_dev, void *mode) @@ -171,8 +158,8 @@ static void drm_hdmi_mode_set(struct device *subdrv_dev, void *mode) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->mode_set) - hdmi_manager_ops->mode_set(ctx->hdmi_ctx->ctx, mode); + if (hdmi_ops && hdmi_ops->mode_set) + hdmi_ops->mode_set(ctx->hdmi_ctx->ctx, mode); } static void drm_hdmi_get_max_resol(struct device *subdrv_dev, @@ -182,9 +169,8 @@ static void drm_hdmi_get_max_resol(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->get_max_resol) - hdmi_manager_ops->get_max_resol(ctx->hdmi_ctx->ctx, width, - height); + if (hdmi_ops && hdmi_ops->get_max_resol) + hdmi_ops->get_max_resol(ctx->hdmi_ctx->ctx, width, height); } static void drm_hdmi_commit(struct device *subdrv_dev) @@ -193,8 +179,8 @@ static void drm_hdmi_commit(struct device *subdrv_dev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_manager_ops && hdmi_manager_ops->commit) - hdmi_manager_ops->commit(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->commit) + hdmi_ops->commit(ctx->hdmi_ctx->ctx); } static void drm_hdmi_dpms(struct device *subdrv_dev, int mode) @@ -209,8 +195,8 @@ static void drm_hdmi_dpms(struct device *subdrv_dev, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - if (hdmi_manager_ops && hdmi_manager_ops->disable) - hdmi_manager_ops->disable(ctx->hdmi_ctx->ctx); + if (hdmi_ops && hdmi_ops->disable) + hdmi_ops->disable(ctx->hdmi_ctx->ctx); break; default: DRM_DEBUG_KMS("unkown dps mode: %d\n", mode); @@ -235,8 +221,8 @@ static void drm_mixer_mode_set(struct device *subdrv_dev, DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_mode_set) - hdmi_overlay_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay); + if (mixer_ops && mixer_ops->win_mode_set) + mixer_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay); } static void drm_mixer_commit(struct device *subdrv_dev, int zpos) @@ -245,8 +231,8 @@ static void drm_mixer_commit(struct device *subdrv_dev, int zpos) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_commit) - hdmi_overlay_ops->win_commit(ctx->mixer_ctx->ctx, zpos); + if (mixer_ops && mixer_ops->win_commit) + mixer_ops->win_commit(ctx->mixer_ctx->ctx, zpos); } static void drm_mixer_disable(struct device *subdrv_dev, int zpos) @@ -255,8 +241,8 @@ static void drm_mixer_disable(struct device *subdrv_dev, int zpos) DRM_DEBUG_KMS("%s\n", __FILE__); - if (hdmi_overlay_ops && hdmi_overlay_ops->win_disable) - hdmi_overlay_ops->win_disable(ctx->mixer_ctx->ctx, zpos); + if (mixer_ops && mixer_ops->win_disable) + mixer_ops->win_disable(ctx->mixer_ctx->ctx, zpos); } static struct exynos_drm_overlay_ops drm_hdmi_overlay_ops = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h index 44497cfb6c7..f3ae192c8dc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.h +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.h @@ -38,15 +38,15 @@ struct exynos_drm_hdmi_context { void *ctx; }; -struct exynos_hdmi_display_ops { +struct exynos_hdmi_ops { + /* display */ bool (*is_connected)(void *ctx); int (*get_edid)(void *ctx, struct drm_connector *connector, u8 *edid, int len); int (*check_timing)(void *ctx, void *timing); int (*power_on)(void *ctx, int mode); -}; -struct exynos_hdmi_manager_ops { + /* manager */ void (*mode_fixup)(void *ctx, struct drm_connector *connector, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); @@ -57,22 +57,17 @@ struct exynos_hdmi_manager_ops { void (*disable)(void *ctx); }; -struct exynos_hdmi_overlay_ops { +struct exynos_mixer_ops { + /* manager */ int (*enable_vblank)(void *ctx, int pipe); void (*disable_vblank)(void *ctx); + + /* overlay */ void (*win_mode_set)(void *ctx, struct exynos_drm_overlay *overlay); void (*win_commit)(void *ctx, int zpos); void (*win_disable)(void *ctx, int zpos); }; -extern struct platform_driver hdmi_driver; -extern struct platform_driver mixer_driver; - -void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops - *display_ops); -void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops - *manager_ops); -void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops - *overlay_ops); - +void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops); +void exynos_mixer_ops_register(struct exynos_mixer_ops *ops); #endif diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 340424f27fe..b0035387645 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1311,13 +1311,6 @@ static int hdmi_display_power_on(void *ctx, int mode) return 0; } -static struct exynos_hdmi_display_ops display_ops = { - .is_connected = hdmi_is_connected, - .get_edid = hdmi_get_edid, - .check_timing = hdmi_check_timing, - .power_on = hdmi_display_power_on, -}; - static void hdmi_set_acr(u32 freq, u8 *acr) { u32 n, cts; @@ -1995,7 +1988,14 @@ static void hdmi_disable(void *ctx) } } -static struct exynos_hdmi_manager_ops manager_ops = { +static struct exynos_hdmi_ops hdmi_ops = { + /* display */ + .is_connected = hdmi_is_connected, + .get_edid = hdmi_get_edid, + .check_timing = hdmi_check_timing, + .power_on = hdmi_display_power_on, + + /* manager */ .mode_fixup = hdmi_mode_fixup, .mode_set = hdmi_mode_set, .get_max_resol = hdmi_get_max_resol, @@ -2321,8 +2321,7 @@ static int __devinit hdmi_probe(struct platform_device *pdev) hdata->irq = res->start; /* register specific callbacks to common hdmi. */ - exynos_drm_display_ops_register(&display_ops); - exynos_drm_manager_ops_register(&manager_ops); + exynos_hdmi_ops_register(&hdmi_ops); hdmi_resource_poweron(hdata); diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 563092e2388..e15438c0112 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -719,9 +719,12 @@ static void mixer_win_disable(void *ctx, int zpos) spin_unlock_irqrestore(&res->reg_slock, flags); } -static struct exynos_hdmi_overlay_ops overlay_ops = { +static struct exynos_mixer_ops mixer_ops = { + /* manager */ .enable_vblank = mixer_enable_vblank, .disable_vblank = mixer_disable_vblank, + + /* overlay */ .win_mode_set = mixer_win_mode_set, .win_commit = mixer_win_commit, .win_disable = mixer_win_disable, @@ -1071,7 +1074,7 @@ static int __devinit mixer_probe(struct platform_device *pdev) goto fail; /* register specific callback point to common hdmi. */ - exynos_drm_overlay_ops_register(&overlay_ops); + exynos_mixer_ops_register(&mixer_ops); mixer_resource_poweron(ctx); -- cgit v1.2.3-70-g09d2 From 677e84c1b5c8533ea351a9556308071ca47a1eb2 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Thu, 5 Apr 2012 20:49:27 +0900 Subject: drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv The struct exynos_drm_manager has to exist for exynos drm sub driver using encoder and connector. If it isn't NULL to member of struct exynos_drm_subdrv, will create encoder and connector else will not. And the is_local member also doesn't need. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_core.c | 14 ++++++++------ drivers/gpu/drm/exynos/exynos_drm_drv.h | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 20 ++++++++++++-------- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 15 +++++++++------ drivers/gpu/drm/exynos/exynos_drm_vidi.c | 20 ++++++++++++-------- 5 files changed, 46 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c index 411832e8e17..eaf630dc5db 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_core.c +++ b/drivers/gpu/drm/exynos/exynos_drm_core.c @@ -54,16 +54,18 @@ static int exynos_drm_subdrv_probe(struct drm_device *dev, * * P.S. note that this driver is considered for modularization. */ - ret = subdrv->probe(dev, subdrv->manager.dev); + ret = subdrv->probe(dev, subdrv->dev); if (ret) return ret; } - if (subdrv->is_local) + if (!subdrv->manager) return 0; + subdrv->manager->dev = subdrv->dev; + /* create and initialize a encoder for this sub driver. */ - encoder = exynos_drm_encoder_create(dev, &subdrv->manager, + encoder = exynos_drm_encoder_create(dev, subdrv->manager, (1 << MAX_CRTC) - 1); if (!encoder) { DRM_ERROR("failed to create encoder\n"); @@ -186,7 +188,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file) list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) { if (subdrv->open) { - ret = subdrv->open(dev, subdrv->manager.dev, file); + ret = subdrv->open(dev, subdrv->dev, file); if (ret) goto err; } @@ -197,7 +199,7 @@ int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file) err: list_for_each_entry_reverse(subdrv, &subdrv->list, list) { if (subdrv->close) - subdrv->close(dev, subdrv->manager.dev, file); + subdrv->close(dev, subdrv->dev, file); } return ret; } @@ -209,7 +211,7 @@ void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file) list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) { if (subdrv->close) - subdrv->close(dev, subdrv->manager.dev, file); + subdrv->close(dev, subdrv->dev, file); } } EXPORT_SYMBOL_GPL(exynos_drm_subdrv_close); diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index fbd0a232c93..1d814175cd4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -225,24 +225,25 @@ struct exynos_drm_private { * Exynos drm sub driver structure. * * @list: sub driver has its own list object to register to exynos drm driver. + * @dev: pointer to device object for subdrv device driver. * @drm_dev: pointer to drm_device and this pointer would be set * when sub driver calls exynos_drm_subdrv_register(). - * @is_local: appear encoder and connector disrelated device. + * @manager: subdrv has its own manager to control a hardware appropriately + * and we can access a hardware drawing on this manager. * @probe: this callback would be called by exynos drm driver after * subdrv is registered to it. * @remove: this callback is used to release resources created * by probe callback. * @open: this would be called with drm device file open. * @close: this would be called with drm device file close. - * @manager: subdrv has its own manager to control a hardware appropriately - * and we can access a hardware drawing on this manager. * @encoder: encoder object owned by this sub driver. * @connector: connector object owned by this sub driver. */ struct exynos_drm_subdrv { struct list_head list; + struct device *dev; struct drm_device *drm_dev; - bool is_local; + struct exynos_drm_manager *manager; int (*probe)(struct drm_device *drm_dev, struct device *dev); void (*remove)(struct drm_device *dev); @@ -251,7 +252,6 @@ struct exynos_drm_subdrv { void (*close)(struct drm_device *drm_dev, struct device *dev, struct drm_file *file); - struct exynos_drm_manager manager; struct drm_encoder *encoder; struct drm_connector *connector; }; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index ecb6db22970..29fdbfeb43c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -172,7 +172,7 @@ static void fimd_dpms(struct device *subdrv_dev, int mode) static void fimd_apply(struct device *subdrv_dev) { struct fimd_context *ctx = get_fimd_context(subdrv_dev); - struct exynos_drm_manager *mgr = &ctx->subdrv.manager; + struct exynos_drm_manager *mgr = ctx->subdrv.manager; struct exynos_drm_manager_ops *mgr_ops = mgr->ops; struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops; struct fimd_win_data *win_data; @@ -577,6 +577,13 @@ static struct exynos_drm_overlay_ops fimd_overlay_ops = { .disable = fimd_win_disable, }; +static struct exynos_drm_manager fimd_manager = { + .pipe = -1, + .ops = &fimd_manager_ops, + .overlay_ops = &fimd_overlay_ops, + .display_ops = &fimd_display_ops, +}; + static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc) { struct exynos_drm_private *dev_priv = drm_dev->dev_private; @@ -628,7 +635,7 @@ static irqreturn_t fimd_irq_handler(int irq, void *dev_id) struct fimd_context *ctx = (struct fimd_context *)dev_id; struct exynos_drm_subdrv *subdrv = &ctx->subdrv; struct drm_device *drm_dev = subdrv->drm_dev; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; u32 val; val = readl(ctx->regs + VIDINTCON1); @@ -744,7 +751,7 @@ static void fimd_clear_win(struct fimd_context *ctx, int win) static int fimd_power_on(struct fimd_context *ctx, bool enable) { struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct device *dev = subdrv->manager.dev; + struct device *dev = subdrv->dev; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -867,13 +874,10 @@ static int __devinit fimd_probe(struct platform_device *pdev) subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &fimd_manager; subdrv->probe = fimd_subdrv_probe; subdrv->remove = fimd_subdrv_remove; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &fimd_manager_ops; - subdrv->manager.overlay_ops = &fimd_overlay_ops; - subdrv->manager.display_ops = &fimd_display_ops; - subdrv->manager.dev = dev; mutex_init(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 348048b766a..3424463676e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -117,7 +117,7 @@ static int drm_hdmi_enable_vblank(struct device *subdrv_dev) { struct drm_hdmi_context *ctx = to_context(subdrv_dev); struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -251,6 +251,12 @@ static struct exynos_drm_overlay_ops drm_hdmi_overlay_ops = { .disable = drm_mixer_disable, }; +static struct exynos_drm_manager hdmi_manager = { + .pipe = -1, + .ops = &drm_hdmi_manager_ops, + .overlay_ops = &drm_hdmi_overlay_ops, + .display_ops = &drm_hdmi_display_ops, +}; static int hdmi_subdrv_probe(struct drm_device *drm_dev, struct device *dev) @@ -318,12 +324,9 @@ static int __devinit exynos_drm_hdmi_probe(struct platform_device *pdev) subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &hdmi_manager; subdrv->probe = hdmi_subdrv_probe; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &drm_hdmi_manager_ops; - subdrv->manager.overlay_ops = &drm_hdmi_overlay_ops; - subdrv->manager.display_ops = &drm_hdmi_display_ops; - subdrv->manager.dev = dev; platform_set_drvdata(pdev, subdrv); diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 8e1339f9fe1..7b9c153dceb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -199,7 +199,7 @@ static void vidi_dpms(struct device *subdrv_dev, int mode) static void vidi_apply(struct device *subdrv_dev) { struct vidi_context *ctx = get_vidi_context(subdrv_dev); - struct exynos_drm_manager *mgr = &ctx->subdrv.manager; + struct exynos_drm_manager *mgr = ctx->subdrv.manager; struct exynos_drm_manager_ops *mgr_ops = mgr->ops; struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops; struct vidi_win_data *win_data; @@ -374,6 +374,13 @@ static struct exynos_drm_overlay_ops vidi_overlay_ops = { .disable = vidi_win_disable, }; +static struct exynos_drm_manager vidi_manager = { + .pipe = -1, + .ops = &vidi_manager_ops, + .overlay_ops = &vidi_overlay_ops, + .display_ops = &vidi_display_ops, +}; + static void vidi_finish_pageflip(struct drm_device *drm_dev, int crtc) { struct exynos_drm_private *dev_priv = drm_dev->dev_private; @@ -425,7 +432,7 @@ static void vidi_fake_vblank_handler(struct work_struct *work) struct vidi_context *ctx = container_of(work, struct vidi_context, work); struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct exynos_drm_manager *manager = &subdrv->manager; + struct exynos_drm_manager *manager = subdrv->manager; if (manager->pipe < 0) return; @@ -471,7 +478,7 @@ static void vidi_subdrv_remove(struct drm_device *drm_dev) static int vidi_power_on(struct vidi_context *ctx, bool enable) { struct exynos_drm_subdrv *subdrv = &ctx->subdrv; - struct device *dev = subdrv->manager.dev; + struct device *dev = subdrv->dev; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -611,13 +618,10 @@ static int __devinit vidi_probe(struct platform_device *pdev) ctx->raw_edid = (struct edid *)fake_edid_info; subdrv = &ctx->subdrv; + subdrv->dev = dev; + subdrv->manager = &vidi_manager; subdrv->probe = vidi_subdrv_probe; subdrv->remove = vidi_subdrv_remove; - subdrv->manager.pipe = -1; - subdrv->manager.ops = &vidi_manager_ops; - subdrv->manager.overlay_ops = &vidi_overlay_ops; - subdrv->manager.display_ops = &vidi_display_ops; - subdrv->manager.dev = dev; mutex_init(&ctx->lock); -- cgit v1.2.3-70-g09d2 From 9e41dd35b39c2cf40767332b8f914d7afe25cc40 Mon Sep 17 00:00:00 2001 From: Andrei Warkentin Date: Thu, 12 Apr 2012 15:55:21 +1000 Subject: MD: Bitmap version cleanup. bitmap_new_disk_sb() would still create V3 bitmap superblock with host-endian layout. Perhaps I'm confused, but shouldn't bitmap_new_disk_sb() be creating a V4 bitmap superblock instead, that is portable, as per comment in bitmap.h? Signed-off-by: Andrei Warkentin Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 3d0dfa7a89a..1c264a701e7 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -539,9 +539,6 @@ static int bitmap_new_disk_sb(struct bitmap *bitmap) bitmap->events_cleared = bitmap->mddev->events; sb->events_cleared = cpu_to_le64(bitmap->mddev->events); - bitmap->flags |= BITMAP_HOSTENDIAN; - sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN); - kunmap_atomic(sb); return 0; -- cgit v1.2.3-70-g09d2 From f4380a915823dbed0bf8e3cf502ebcf2b7c7f833 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Thu, 12 Apr 2012 16:04:47 +1000 Subject: md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery. If r1bio->sectors % 8 != 0,then the memcmp and a later memcpy will omit the last bio_vec. This is suitable for any stable kernel since 3.1 when bad-block management was introduced. Cc: stable@vger.kernel.org Signed-off-by: majianpeng Signed-off-by: NeilBrown --- drivers/md/raid1.c | 3 ++- drivers/md/raid10.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d35e4c991e3..15dd59b84e9 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1712,6 +1712,7 @@ static int process_checks(struct r1bio *r1_bio) struct r1conf *conf = mddev->private; int primary; int i; + int vcnt; for (primary = 0; primary < conf->raid_disks * 2; primary++) if (r1_bio->bios[primary]->bi_end_io == end_sync_read && @@ -1721,9 +1722,9 @@ static int process_checks(struct r1bio *r1_bio) break; } r1_bio->read_disk = primary; + vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9); for (i = 0; i < conf->raid_disks * 2; i++) { int j; - int vcnt = r1_bio->sectors >> (PAGE_SHIFT- 9); struct bio *pbio = r1_bio->bios[primary]; struct bio *sbio = r1_bio->bios[i]; int size; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index fff782189e4..c8dbb84d535 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1788,6 +1788,7 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) struct r10conf *conf = mddev->private; int i, first; struct bio *tbio, *fbio; + int vcnt; atomic_set(&r10_bio->remaining, 1); @@ -1802,10 +1803,10 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) first = i; fbio = r10_bio->devs[i].bio; + vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9); /* now find blocks with errors */ for (i=0 ; i < conf->copies ; i++) { int j, d; - int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9); tbio = r10_bio->devs[i].bio; @@ -1871,7 +1872,6 @@ static void sync_request_write(struct mddev *mddev, struct r10bio *r10_bio) */ for (i = 0; i < conf->copies; i++) { int j, d; - int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9); tbio = r10_bio->devs[i].repl_bio; if (!tbio || !tbio->bi_end_io) -- cgit v1.2.3-70-g09d2 From afbaa90b80b1ec66e5137cc3824746bfdf559b18 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 12 Apr 2012 16:05:06 +1000 Subject: md/bitmap: prevent bitmap_daemon_work running while initialising bitmap If a bitmap is added while the array is active, it is possible for bitmap_daemon_work to run while the bitmap is being initialised. This is particularly a problem if bitmap_daemon_work sees bitmap->filemap as non-NULL before it has been filled in properly. So hold bitmap_info.mutex while filling in ->filemap to prevent problems. This patch is suitable for any -stable kernel, though it might not apply cleanly before about 3.1. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 1c264a701e7..97e73e555d1 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1785,7 +1785,9 @@ int bitmap_load(struct mddev *mddev) * re-add of a missing device */ start = mddev->recovery_cp; + mutex_lock(&mddev->bitmap_info.mutex); err = bitmap_init_from_disk(bitmap, start); + mutex_unlock(&mddev->bitmap_info.mutex); if (err) goto out; -- cgit v1.2.3-70-g09d2 From 63634806519b49bb43f37e53a1e8366eb3e846a4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 12 Apr 2012 08:47:05 +0200 Subject: block: mtip32xx: remove HOTPLUG_PCI_PCIE dependancy This removes the HOTPLUG_PCI_PCIE dependency on the driver and makes it depend on PCI. Cc: Sam Bradshaw Signed-off-by: Greg Kroah-Hartman Acked-by: Asai Thambi S P Signed-off-by: Jens Axboe --- drivers/block/mtip32xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/mtip32xx/Kconfig b/drivers/block/mtip32xx/Kconfig index b5dd14e072f..0ba837fc62a 100644 --- a/drivers/block/mtip32xx/Kconfig +++ b/drivers/block/mtip32xx/Kconfig @@ -4,6 +4,6 @@ config BLK_DEV_PCIESSD_MTIP32XX tristate "Block Device Driver for Micron PCIe SSDs" - depends on HOTPLUG_PCI_PCIE + depends on PCI help This enables the block driver for Micron PCIe SSDs. -- cgit v1.2.3-70-g09d2 From 15a13bbdffb0d6288a5dd04aee9736267da1335f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 12 Apr 2012 01:27:57 +0200 Subject: drm/i915: clear fencing tracking state when retiring requests This fixes a resume regression introduced in commit 7dd4906586274f3945f2aeaaa5a33b451c3b4bba Author: Chris Wilson Date: Wed Mar 21 10:48:18 2012 +0000 drm/i915: Mark untiled BLT commands as fenced on gen2/3 which fixed fencing tracking for untiled blt commands. A side effect of that patch was that now also untiled objects have a non-zero obj->last_fenced_seqno to track when a fence can be set up after a pipelined tiling change. Unfortunately this was only cleared by the fence setup and teardown code, resulting in tons of untiled but inactive objects with non-zero last_fenced_seqno. Now after resume we completely reset the seqno tracking, both on the driver side (by setting dev_priv->next_seqno = 1) and on the hw side (by allocating a new hws page, which contains the seqnos). Hilarity and indefinite waits ensued from the stale seqnos in obj->last_fenced_seqno from before the suspend. The fix is to properly clear the fencing tracking state like we already do for the normal gpu rendering while moving objects off the active list. Reported-and-tested-by: "Rafael J. Wysocki" Cc: Jiri Slaby Reviewed-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4c65c639f77..0e3c6acde95 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1493,6 +1493,7 @@ i915_gem_object_move_off_active(struct drm_i915_gem_object *obj) { list_del_init(&obj->ring_list); obj->last_rendering_seqno = 0; + obj->last_fenced_seqno = 0; } static void @@ -1521,6 +1522,7 @@ i915_gem_object_move_to_inactive(struct drm_i915_gem_object *obj) BUG_ON(!list_empty(&obj->gpu_write_list)); BUG_ON(!obj->active); obj->ring = NULL; + obj->last_fenced_ring = NULL; i915_gem_object_move_off_active(obj); obj->fenced_gpu_access = false; -- cgit v1.2.3-70-g09d2 From 5e7045b010bdb56abbfe5714e8debf03a024c016 Mon Sep 17 00:00:00 2001 From: Zhi Yong Wu Date: Mon, 9 Apr 2012 10:42:13 +0300 Subject: tools/virtio: fix up vhost/test module build commit ea5d404655ba3b356d0c06d6a3c4f24112124522 broke build for the vhost test module used by tools/virtio. Fix it up. Signed-off-by: Zhi Yong Wu Signed-off-by: Michael S. Tsirkin --- drivers/vhost/test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index fc9a1d75281..3de00d9fae2 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -155,7 +155,7 @@ static int vhost_test_release(struct inode *inode, struct file *f) vhost_test_stop(n, &private); vhost_test_flush(n); - vhost_dev_cleanup(&n->dev); + vhost_dev_cleanup(&n->dev, false); /* We do an extra flush before freeing memory, * since jobs can re-queue themselves. */ vhost_test_flush(n); -- cgit v1.2.3-70-g09d2 From c0aa3e0916d7e531e69b02e426f7162dfb1c6c0f Mon Sep 17 00:00:00 2001 From: Ren Mingxin Date: Tue, 10 Apr 2012 15:28:05 +0800 Subject: virtio_blk: helper function to format disk names The current virtio block's naming algorithm just supports 18278 (26^3 + 26^2 + 26) disks. If there are more virtio blocks, there will be disks with the same name. Based on commit 3e1a7ff8a0a7b948f2684930166954f9e8e776fe, add a function "virtblk_name_format()" for virtio block to support mass of disks naming. Notes: - Our naming scheme is ugly. We are stuck with it for virtio but don't use it for any new driver: new drivers should name their devices PREFIX%d where the sequence number can be allocated by ida - sd_format_disk_name has exactly the same logic. Moving it to a central place was deferred over worries that this will make people keep using the legacy naming in new drivers. We kept code idential in case someone wants to deduplicate later. Signed-off-by: Ren Mingxin Acked-by: Asias He Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c4a60badf25..303779cb1fa 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -374,6 +374,34 @@ static int init_vq(struct virtio_blk *vblk) return err; } +/* + * Legacy naming scheme used for virtio devices. We are stuck with it for + * virtio blk but don't ever use it for any new driver. + */ +static int virtblk_name_format(char *prefix, int index, char *buf, int buflen) +{ + const int base = 'z' - 'a' + 1; + char *begin = buf + strlen(prefix); + char *end = buf + buflen; + char *p; + int unit; + + p = end - 1; + *p = '\0'; + unit = base; + do { + if (p == begin) + return -EINVAL; + *--p = 'a' + (index % unit); + index = (index / unit) - 1; + } while (index >= 0); + + memmove(begin, p, end - p); + memcpy(buf, prefix, strlen(prefix)); + + return 0; +} + static int __devinit virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; @@ -442,18 +470,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) q->queuedata = vblk; - if (index < 26) { - sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26); - } else if (index < (26 + 1) * 26) { - sprintf(vblk->disk->disk_name, "vd%c%c", - 'a' + index / 26 - 1, 'a' + index % 26); - } else { - const unsigned int m1 = (index / 26 - 1) / 26 - 1; - const unsigned int m2 = (index / 26 - 1) % 26; - const unsigned int m3 = index % 26; - sprintf(vblk->disk->disk_name, "vd%c%c%c", - 'a' + m1, 'a' + m2, 'a' + m3); - } + virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN); vblk->disk->major = major; vblk->disk->first_minor = index_to_minor(index); -- cgit v1.2.3-70-g09d2 From 6f3603367b8f7c34598fdfc1058622e0e1951e98 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 12 Apr 2012 07:51:08 -0700 Subject: IB/srpt: Set srq_type to IB_SRQT_BASIC Since commit 96104eda0169 ("RDMA/core: Add SRQ type field"), kernel users of SRQs need to specify srq_type = IB_SRQT_BASIC in struct ib_srq_init_attr, or else most low-level drivers will fail in when srpt_add_one() calls ib_create_srq() and gets -ENOSYS. (mlx4_ib works OK nearly all of the time, because it just needs srq_type != IB_SRQT_XRC. And apparently nearly everyone using ib_srpt is using mlx4 hardware) Reported-by: Alexey Shvetsov Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srpt/ib_srpt.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 69e2ad06e51..daf21b89999 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -3232,6 +3232,7 @@ static void srpt_add_one(struct ib_device *device) srq_attr.attr.max_wr = sdev->srq_size; srq_attr.attr.max_sge = 1; srq_attr.attr.srq_limit = 0; + srq_attr.srq_type = IB_SRQT_BASIC; sdev->srq = ib_create_srq(sdev->pd, &srq_attr); if (IS_ERR(sdev->srq)) -- cgit v1.2.3-70-g09d2 From 96d5d96aedc29c75bb16433f6ecf8664ec3c1b46 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Tue, 21 Feb 2012 10:45:26 -0800 Subject: ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs This patch adds the IDE-mode SATA DeviceIDs for the Intel DH89xxCC PCH. Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 68013f96729..7857e8fd0a3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (DH89xxCC) */ + { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; -- cgit v1.2.3-70-g09d2 From 99b80e97710ae2e53c951acfdd956e9f38e36646 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 10 Mar 2012 12:00:05 +0300 Subject: sata_mv: silence an uninitialized variable warning Gcc version 4.6.2-12 complains that if we can't find the "nr-ports" property in of_property_read_u32_array() then "n_ports" is used uninitialized. Let's set it to zero in that case. Signed-off-by: Dan Carpenter Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 38950ea8398..7336d4a7ab3 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4025,7 +4025,8 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - int n_ports, rc; + int n_ports = 0; + int rc; ata_print_version_once(&pdev->dev, DRV_VERSION); -- cgit v1.2.3-70-g09d2 From 85d6725b7c0d7e3fa4261fdd4c020be4224fc9f1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 10 Mar 2012 23:28:46 -0800 Subject: libata: make ata_print_id atomic This variable is incremented from multiple contexts (module_init via libata-lldds and the libsas discovery thread). Make it atomic to head off any chance of libsas and libata creating duplicate ids. Acked-by: Jacek Danecki Signed-off-by: Dan Williams Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++-- drivers/ata/libata-scsi.c | 4 ++-- drivers/ata/libata.h | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e0bda9ff89c..28db50b57b9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -unsigned int ata_print_id = 1; +atomic_t ata_print_id = ATOMIC_INIT(1); struct ata_force_param { const char *name; @@ -6029,7 +6029,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* give ports names and add SCSI hosts */ for (i = 0; i < host->n_ports; i++) - host->ports[i]->print_id = ata_print_id++; + host->ports[i]->print_id = atomic_inc_return(&ata_print_id); /* Create associated sysfs transport objects */ diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 1ee00c8b5b0..93dabdcd2cb 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3843,7 +3843,7 @@ int ata_sas_async_port_init(struct ata_port *ap) int rc = ap->ops->port_start(ap); if (!rc) { - ap->print_id = ata_print_id++; + ap->print_id = atomic_inc_return(&ata_print_id); __ata_port_probe(ap); } @@ -3867,7 +3867,7 @@ int ata_sas_port_init(struct ata_port *ap) int rc = ap->ops->port_start(ap); if (!rc) { - ap->print_id = ata_print_id++; + ap->print_id = atomic_inc_return(&ata_print_id); rc = ata_port_probe(ap); } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 2e26fcaf635..9d0fd0b7185 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -53,7 +53,7 @@ enum { ATA_DNXFER_QUIET = (1 << 31), }; -extern unsigned int ata_print_id; +extern atomic_t ata_print_id; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; -- cgit v1.2.3-70-g09d2 From 44e4360fa3384850d65dd36fb4e6e5f2f112709b Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Thu, 12 Apr 2012 12:49:12 -0700 Subject: drivers/char/random.c: fix boot id uniqueness race /proc/sys/kernel/random/boot_id can be read concurrently by userspace processes. If two (or more) user-space processes concurrently read boot_id when sysctl_bootid is not yet assigned, a race can occur making boot_id differ between the reads. Because the whole point of the boot id is to be unique across a kernel execution, fix this by protecting this operation with a spinlock. Given that this operation is not frequently used, hitting the spinlock on each call should not be an issue. Signed-off-by: Mathieu Desnoyers Cc: "Theodore Ts'o" Cc: Matt Mackall Signed-off-by: Eric Dumazet Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 54ca8b23cde..4ec04a75473 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1260,10 +1260,15 @@ static int proc_do_uuid(ctl_table *table, int write, uuid = table->data; if (!uuid) { uuid = tmp_uuid; - uuid[8] = 0; - } - if (uuid[8] == 0) generate_random_uuid(uuid); + } else { + static DEFINE_SPINLOCK(bootid_spinlock); + + spin_lock(&bootid_spinlock); + if (!uuid[8]) + generate_random_uuid(uuid); + spin_unlock(&bootid_spinlock); + } sprintf(buf, "%pU", uuid); -- cgit v1.2.3-70-g09d2 From bb58da08f01ee12561867fcd4385b82679ae7f6c Mon Sep 17 00:00:00 2001 From: Andreas Dumberger Date: Thu, 12 Apr 2012 12:49:12 -0700 Subject: drivers/rtc/rtc-r9701.c: reset registers if invalid values are detected hwclock refuses to set date/time if RTC registers contain invalid values. Check the date/time register values at probe time and initialize them to make hwclock happy. Signed-off-by: Andreas Dumberger Signed-off-by: Anatolij Gustschin Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-r9701.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c index 7f8e6c24793..33b6ba0afa0 100644 --- a/drivers/rtc/rtc-r9701.c +++ b/drivers/rtc/rtc-r9701.c @@ -122,6 +122,7 @@ static const struct rtc_class_ops r9701_rtc_ops = { static int __devinit r9701_probe(struct spi_device *spi) { struct rtc_device *rtc; + struct rtc_time dt; unsigned char tmp; int res; @@ -132,6 +133,27 @@ static int __devinit r9701_probe(struct spi_device *spi) return -ENODEV; } + /* + * The device seems to be present. Now check if the registers + * contain invalid values. If so, try to write a default date: + * 2000/1/1 00:00:00 + */ + r9701_get_datetime(&spi->dev, &dt); + if (rtc_valid_tm(&dt)) { + dev_info(&spi->dev, "trying to repair invalid date/time\n"); + dt.tm_sec = 0; + dt.tm_min = 0; + dt.tm_hour = 0; + dt.tm_mday = 1; + dt.tm_mon = 0; + dt.tm_year = 100; + + if (r9701_set_datetime(&spi->dev, &dt)) { + dev_err(&spi->dev, "cannot repair RTC register\n"); + return -ENODEV; + } + } + rtc = rtc_device_register("r9701", &spi->dev, &r9701_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) -- cgit v1.2.3-70-g09d2 From 32050017cf3bf2b983571a90351328b4f66e463d Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Apr 2012 12:49:12 -0700 Subject: drivers/rtc/rtc-efi.c: fix section mismatch warning efi_rtc_init() uses platform_driver_probe(), so there's no need to also set efi_rtc_driver's probe member (as it won't be used anyway). This fixes a modpost section mismatch warning (as efi_rtc_probe() validly is __init). Signed-off-by: Jan Beulich Cc: Matthew Garrett Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-efi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c index 550292304b0..c9f890b088d 100644 --- a/drivers/rtc/rtc-efi.c +++ b/drivers/rtc/rtc-efi.c @@ -213,7 +213,6 @@ static struct platform_driver efi_rtc_driver = { .name = "rtc-efi", .owner = THIS_MODULE, }, - .probe = efi_rtc_probe, .remove = __exit_p(efi_rtc_remove), }; -- cgit v1.2.3-70-g09d2 From cd1e6f9e53e1a673a489826729709aaffa8ad621 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 12 Apr 2012 12:49:14 -0700 Subject: drivers/rtc/rtc-s3c.c: fix compilation error Fix this error: drivers/rtc/rtc-s3c.c: At top level: drivers/rtc/rtc-s3c.c:671:3: error: request for member `data' in something not a structure or union drivers/rtc/rtc-s3c.c:674:3: error: request for member `data' in something not a structure or union drivers/rtc/rtc-s3c.c:677:3: error: request for member `data' in something not a structure or union drivers/rtc/rtc-s3c.c:680:3: error: request for member `data' in something not a structure or union Signed-off-by: Tushar Behera Cc: Heiko Stuebner Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 9ccea134a99..2087953f108 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -667,16 +667,16 @@ static int s3c_rtc_resume(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id s3c_rtc_dt_match[] = { { - .compatible = "samsung,s3c2410-rtc" + .compatible = "samsung,s3c2410-rtc", .data = TYPE_S3C2410, }, { - .compatible = "samsung,s3c2416-rtc" + .compatible = "samsung,s3c2416-rtc", .data = TYPE_S3C2416, }, { - .compatible = "samsung,s3c2443-rtc" + .compatible = "samsung,s3c2443-rtc", .data = TYPE_S3C2443, }, { - .compatible = "samsung,s3c6410-rtc" + .compatible = "samsung,s3c6410-rtc", .data = TYPE_S3C64XX, }, {}, -- cgit v1.2.3-70-g09d2 From c3cba9281ba39f3aef377fe52890e2d8f1e6dae3 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Thu, 12 Apr 2012 12:49:14 -0700 Subject: drivers/rtc/rtc-s3c.c: add placeholder for driver private data Driver data field is a pointer, hence assigning that to an integer results in compilation warnings. Fixes following compilation warnings: drivers/rtc/rtc-s3c.c: In function `s3c_rtc_get_driver_data': drivers/rtc/rtc-s3c.c:452:3: warning: return makes integer from pointer without a cast [enabled by default] drivers/rtc/rtc-s3c.c: At top level: drivers/rtc/rtc-s3c.c:674:3: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/rtc/rtc-s3c.c:674:3: warning: (near initialization for `s3c_rtc_dt_match[1].data') [enabled by default] drivers/rtc/rtc-s3c.c:677:3: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/rtc/rtc-s3c.c:677:3: warning: (near initialization for `s3c_rtc_dt_match[2].data') [enabled by default] drivers/rtc/rtc-s3c.c:680:3: warning: initialization makes pointer from integer without a cast [enabled by default] drivers/rtc/rtc-s3c.c:680:3: warning: (near initialization for `s3c_rtc_dt_match[3].data') [enabled by default] Signed-off-by: Tushar Behera Cc: Heiko Stuebner Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 2087953f108..3f3a2975236 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -40,6 +40,10 @@ enum s3c_cpu_type { TYPE_S3C64XX, }; +struct s3c_rtc_drv_data { + int cpu_type; +}; + /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ @@ -446,10 +450,12 @@ static const struct of_device_id s3c_rtc_dt_match[]; static inline int s3c_rtc_get_driver_data(struct platform_device *pdev) { #ifdef CONFIG_OF + struct s3c_rtc_drv_data *data; if (pdev->dev.of_node) { const struct of_device_id *match; match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); - return match->data; + data = (struct s3c_rtc_drv_data *) match->data; + return data->cpu_type; } #endif return platform_get_device_id(pdev)->driver_data; @@ -664,20 +670,27 @@ static int s3c_rtc_resume(struct platform_device *pdev) #define s3c_rtc_resume NULL #endif +static struct s3c_rtc_drv_data s3c_rtc_drv_data_array[] = { + [TYPE_S3C2410] = { TYPE_S3C2410 }, + [TYPE_S3C2416] = { TYPE_S3C2416 }, + [TYPE_S3C2443] = { TYPE_S3C2443 }, + [TYPE_S3C64XX] = { TYPE_S3C64XX }, +}; + #ifdef CONFIG_OF static const struct of_device_id s3c_rtc_dt_match[] = { { .compatible = "samsung,s3c2410-rtc", - .data = TYPE_S3C2410, + .data = &s3c_rtc_drv_data_array[TYPE_S3C2410], }, { .compatible = "samsung,s3c2416-rtc", - .data = TYPE_S3C2416, + .data = &s3c_rtc_drv_data_array[TYPE_S3C2416], }, { .compatible = "samsung,s3c2443-rtc", - .data = TYPE_S3C2443, + .data = &s3c_rtc_drv_data_array[TYPE_S3C2443], }, { .compatible = "samsung,s3c6410-rtc", - .data = TYPE_S3C64XX, + .data = &s3c_rtc_drv_data_array[TYPE_S3C64XX], }, {}, }; -- cgit v1.2.3-70-g09d2 From f3ec434c69ac7f447ff6e6389c19727c9f002087 Mon Sep 17 00:00:00 2001 From: Konstantin Shlyakhovoy Date: Thu, 12 Apr 2012 12:49:15 -0700 Subject: drivers/rtc/rtc-twl.c: use static register while reading time RTC stores time and date in several registers. Due to the fact that these registers can't be read instantaneously, there is a chance that reading from counting registers gives an error of one minute, one hour, one day, etc. To address this issue, the RTC has hardware support to copy the RTC counting registers to static shadowed registers. The current implementation does not use this feature, and in a stress test, we can reproduce this error at a rate of around two times per 300000 readings. Fix the implementation to ensure that the right snapshot of time is captured. Signed-off-by: Konstantin Shlyakhovoy Signed-off-by: Nishanth Menon Cc: Alessandro Zummo Cc: Benoit Cousson Cc: linux-omap Acked-by: Mykola Oleksiienko Acked-by: Oleksandr Dmytryshyn Acked-by: Graeme Gregory Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-twl.c | 43 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index 4c2c6df2a9e..258abeabf62 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -112,6 +112,7 @@ static const u8 twl6030_rtc_reg_map[] = { #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 +#define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80 /* RTC_STATUS_REG bitfields */ #define BIT_RTC_STATUS_REG_RUN_M 0x02 @@ -235,25 +236,57 @@ static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm) unsigned char rtc_data[ALL_TIME_REGS + 1]; int ret; u8 save_control; + u8 rtc_control; ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); - if (ret < 0) + if (ret < 0) { + dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret); return ret; + } + /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */ + if (twl_class_is_6030()) { + if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) { + save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M; + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s clr GET_TIME, error %d\n", + __func__, ret); + return ret; + } + } + } - save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + /* Copy RTC counting registers to static registers or latches */ + rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M; - ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); - if (ret < 0) + /* for twl6030/32 enable read access to static shadowed registers */ + if (twl_class_is_6030()) + rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT; + + ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret); return ret; + } ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); if (ret < 0) { - dev_err(dev, "rtc_read_time error %d\n", ret); + dev_err(dev, "%s: reading data, error %d\n", __func__, ret); return ret; } + /* for twl6030 restore original state of rtc control register */ + if (twl_class_is_6030()) { + ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) { + dev_err(dev, "%s: restore CTRL_REG, error %d\n", + __func__, ret); + return ret; + } + } + tm->tm_sec = bcd2bin(rtc_data[0]); tm->tm_min = bcd2bin(rtc_data[1]); tm->tm_hour = bcd2bin(rtc_data[2]); -- cgit v1.2.3-70-g09d2 From 2f3972168353d355854d6381f1f360ce83b723e5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 12:49:16 -0700 Subject: drivers/rtc/rtc-pl031.c: enable clock on all ST variants The ST variants of the PL031 all require bit 26 in the control register to be set before they work properly. Discovered this when testing on the Nomadik board where it would suprisingly just stand still. Signed-off-by: Linus Walleij Cc: Mian Yousaf Kaukab Cc: Alessandro Rubini Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pl031.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 692de7360e9..684ef4bbfce 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -339,8 +339,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision); /* Enable the clockwatch on ST Variants */ - if ((ldata->hw_designer == AMBA_VENDOR_ST) && - (ldata->hw_revision > 1)) + if (ldata->hw_designer == AMBA_VENDOR_ST) writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN, ldata->base + RTC_CR); -- cgit v1.2.3-70-g09d2 From 62d2feb9803f18c4e3c8a1a2c7e30a54df8a1d72 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Thu, 12 Apr 2012 21:48:03 +0200 Subject: staging: iio: hmc5843: Fix crash in probe function. Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ #28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [] lr : [] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [] (kfree+0x84/0x144) from [] (device_add+0x530/0x57c) [ 37.545806] [] (device_add+0x530/0x57c) from [] (iio_device_register+0x8c8/0x990) [ 37.555480] [] (iio_device_register+0x8c8/0x990) from [] (hmc5843_probe+0xec/0x114) [ 37.565338] [] (hmc5843_probe+0xec/0x114) from [] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [] (i2c_device_probe+0xc4/0xf8) from [] (driver_probe_device+0x118/0x218) [ 37.584777] [] (driver_probe_device+0x118/0x218) from [] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [] (bus_for_each_drv+0x4c/0x84) from [] (device_attach+0x78/0xa4) [ 37.604125] [] (device_attach+0x78/0xa4) from [] (bus_probe_device+0x28/0x9c) [ 37.613433] [] (bus_probe_device+0x28/0x9c) from [] (device_add+0x3f4/0x57c) [ 37.622650] [] (device_add+0x3f4/0x57c) from [] (i2c_new_device+0xf8/0x19c) [ 37.631805] [] (i2c_new_device+0xf8/0x19c) from [] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [] (i2c_sysfs_new_device+0xb4/0x130) from [] (dev_attr_store+0x18/0x24) [ 37.651611] [] (dev_attr_store+0x18/0x24) from [] (sysfs_write_file+0x10c/0x140) [ 37.661193] [] (sysfs_write_file+0x10c/0x140) from [] (vfs_write+0xb0/0x178) [ 37.670410] [] (vfs_write+0xb0/0x178) from [] (sys_write+0x3c/0x68) [ 37.678833] [] (sys_write+0x3c/0x68) from [] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko Cc: stable Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/magnetometer/hmc5843.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index 91dd3da70cb..e00b416c4d3 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -521,7 +521,9 @@ static int hmc5843_detect(struct i2c_client *client, /* Called when we have found a new HMC5843. */ static void hmc5843_init_client(struct i2c_client *client) { - struct hmc5843_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); + hmc5843_set_meas_conf(client, data->meas_conf); hmc5843_set_rate(client, data->rate); hmc5843_configure(client, data->operating_mode); -- cgit v1.2.3-70-g09d2 From 17b7e1ba1e2ecc9a09f5e154e555accd2a2eaedf Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 00:35:46 +0200 Subject: staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl() If copy_to_user() fails in the WLAN_CMD_GET_NODE_LIST case of the switch in drivers/staging/vt6656/ioctl.c::private_ioctl() we'll leak the memory allocated to 'pNodeList'. Fix that by kfree'ing the memory in the failure case. Also remove a pointless cast (to type 'PSNodeList') of a kmalloc() return value - kmalloc() returns a void pointer that is implicitly converted, so there is no need for an explicit cast. Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c index 1463d76895f..d59456c29df 100644 --- a/drivers/staging/vt6656/ioctl.c +++ b/drivers/staging/vt6656/ioctl.c @@ -565,7 +565,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) result = -ENOMEM; break; } - pNodeList = (PSNodeList)kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC); + pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC); if (pNodeList == NULL) { result = -ENOMEM; break; @@ -601,6 +601,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) } } if (copy_to_user(pReq->data, pNodeList, sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)))) { + kfree(pNodeList); result = -EFAULT; break; } -- cgit v1.2.3-70-g09d2 From 474a89885f77953b12bce9f23660c31ef5c2630e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 22:10:20 +0200 Subject: staging: android: fix mem leaks in __persistent_ram_init() If, in __persistent_ram_init(), the call to persistent_ram_buffer_init() fails or the call to persistent_ram_init_ecc() fails then we fail to free the memory we allocated to 'prz' with kzalloc() - thus leaking it. To prevent the leaks I consolidated all error exits from the function at a 'err:' label at the end and made all error cases jump to that label where we can then make sure we always free 'prz'. This is safe since all the situations where the code bails out happen before 'prz' has been stored anywhere and although we'll do a redundant kfree(NULL) call in the case of kzalloc() itself failing that's OK since kfree() deals gracefully with NULL pointers and I felt it was more important to keep all error exits at a single location than to avoid that one harmless/redundant kfree() on a error path. Signed-off-by: Jesper Juhl Acked-by: Colin Cross Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/persistent_ram.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/android/persistent_ram.c b/drivers/staging/android/persistent_ram.c index e08f2574e30..8d8c1e33e0f 100644 --- a/drivers/staging/android/persistent_ram.c +++ b/drivers/staging/android/persistent_ram.c @@ -399,12 +399,12 @@ static __init struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) { struct persistent_ram_zone *prz; - int ret; + int ret = -ENOMEM; prz = kzalloc(sizeof(struct persistent_ram_zone), GFP_KERNEL); if (!prz) { pr_err("persistent_ram: failed to allocate persistent ram zone\n"); - return ERR_PTR(-ENOMEM); + goto err; } INIT_LIST_HEAD(&prz->node); @@ -412,13 +412,13 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) ret = persistent_ram_buffer_init(dev_name(dev), prz); if (ret) { pr_err("persistent_ram: failed to initialize buffer\n"); - return ERR_PTR(ret); + goto err; } prz->ecc = ecc; ret = persistent_ram_init_ecc(prz, prz->buffer_size); if (ret) - return ERR_PTR(ret); + goto err; if (prz->buffer->sig == PERSISTENT_RAM_SIG) { if (buffer_size(prz) > prz->buffer_size || @@ -442,6 +442,9 @@ struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc) atomic_set(&prz->buffer->size, 0); return prz; +err: + kfree(prz); + return ERR_PTR(ret); } struct persistent_ram_zone * __init -- cgit v1.2.3-70-g09d2 From 1e45860f541497d73162305d48b638d9b87e1ae3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Apr 2012 13:11:50 +0100 Subject: ARM: 7366/3: amba: Remove AMBA level regulator support The AMBA bus regulator support is being used to model on/off switches for power domains which isn't terribly idiomatic for modern kernels with the generic power domain code and creates integration problems on platforms which don't use regulators for their power domains as it's hard to tell the difference between a regulator that is needed but failed to be provided and one that isn't supposed to be there (though DT does make that easier). Platforms that wish to use the regulator API to manage their power domains can indirect via the power domain interface. This feature is only used with the vape supply of the db8500 PRCMU driver which supplies the UARTs and MMC controllers, none of which have support for managing vcore at runtime in mainline (only pl022 SPI controller does). Update that supply to have an always_on constraint until the power domain support for the system is updated so that it is enabled for these users, this is likely to have no impact on practical systems as probably at least one of these devices will be active and cause AMBA to hold the supply on anyway. Signed-off-by: Mark Brown Acked-by: Linus Walleij Tested-by: Shawn Guo Signed-off-by: Russell King --- drivers/amba/bus.c | 42 +----------------------------------------- drivers/mfd/db8500-prcmu.c | 1 + drivers/spi/spi-pl022.c | 2 -- include/linux/amba/bus.h | 7 ------- 4 files changed, 2 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 01c2cf4efcd..cc273226dbd 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -247,8 +247,7 @@ static int amba_pm_restore(struct device *dev) /* * Hooks to provide runtime PM of the pclk (bus clock). It is safe to * enable/disable the bus clock at runtime PM suspend/resume as this - * does not result in loss of context. However, disabling vcore power - * would do, so we leave that to the driver. + * does not result in loss of context. */ static int amba_pm_runtime_suspend(struct device *dev) { @@ -354,39 +353,6 @@ static void amba_put_disable_pclk(struct amba_device *pcdev) clk_put(pclk); } -static int amba_get_enable_vcore(struct amba_device *pcdev) -{ - struct regulator *vcore = regulator_get(&pcdev->dev, "vcore"); - int ret; - - pcdev->vcore = vcore; - - if (IS_ERR(vcore)) { - /* It is OK not to supply a vcore regulator */ - if (PTR_ERR(vcore) == -ENODEV) - return 0; - return PTR_ERR(vcore); - } - - ret = regulator_enable(vcore); - if (ret) { - regulator_put(vcore); - pcdev->vcore = ERR_PTR(-ENODEV); - } - - return ret; -} - -static void amba_put_disable_vcore(struct amba_device *pcdev) -{ - struct regulator *vcore = pcdev->vcore; - - if (!IS_ERR(vcore)) { - regulator_disable(vcore); - regulator_put(vcore); - } -} - /* * These are the device model conversion veneers; they convert the * device model structures to our more specific structures. @@ -399,10 +365,6 @@ static int amba_probe(struct device *dev) int ret; do { - ret = amba_get_enable_vcore(pcdev); - if (ret) - break; - ret = amba_get_enable_pclk(pcdev); if (ret) break; @@ -420,7 +382,6 @@ static int amba_probe(struct device *dev) pm_runtime_put_noidle(dev); amba_put_disable_pclk(pcdev); - amba_put_disable_vcore(pcdev); } while (0); return ret; @@ -442,7 +403,6 @@ static int amba_remove(struct device *dev) pm_runtime_put_noidle(dev); amba_put_disable_pclk(pcdev); - amba_put_disable_vcore(pcdev); return ret; } diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index ebc1e865822..5be32489714 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2788,6 +2788,7 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { .constraints = { .name = "db8500-vape", .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = true, }, .consumer_supplies = db8500_vape_consumers, .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers), diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 96f0da66b18..09c925aaf32 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -2195,7 +2195,6 @@ static int pl022_runtime_suspend(struct device *dev) struct pl022 *pl022 = dev_get_drvdata(dev); clk_disable(pl022->clk); - amba_vcore_disable(pl022->adev); return 0; } @@ -2204,7 +2203,6 @@ static int pl022_runtime_resume(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); - amba_vcore_enable(pl022->adev); clk_enable(pl022->clk); return 0; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 7847e197730..8d54f79457b 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -30,7 +30,6 @@ struct amba_device { struct device dev; struct resource res; struct clk *pclk; - struct regulator *vcore; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -75,12 +74,6 @@ void amba_release_regions(struct amba_device *); #define amba_pclk_disable(d) \ do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) -#define amba_vcore_enable(d) \ - (IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore)) - -#define amba_vcore_disable(d) \ - do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0) - /* Some drivers don't use the struct amba_device */ #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) -- cgit v1.2.3-70-g09d2 From e89c0e4377303a101d1032bf1dde822218372f15 Mon Sep 17 00:00:00 2001 From: David Brown Date: Thu, 12 Apr 2012 11:36:50 -0700 Subject: video: msm: Fix section mismatches in mddi.c The change commit 461cbe77d0a4f887c33a3a95ea68a7daf23b4302 Author: Gregory Bean Date: Wed Jul 28 10:22:13 2010 -0700 video: msm: Fix section mismatch in mddi.c. fixes a section mismatch between the board file and the driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by: David Brown --- drivers/video/msm/mddi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index 4527cbf0a4e..b061d709bc4 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -420,7 +420,7 @@ static void mddi_resume(struct msm_mddi_client_data *cdata) mddi_set_auto_hibernate(&mddi->client_data, 1); } -static int __init mddi_get_client_caps(struct mddi_info *mddi) +static int __devinit mddi_get_client_caps(struct mddi_info *mddi) { int i, j; @@ -622,9 +622,9 @@ uint32_t mddi_remote_read(struct msm_mddi_client_data *cdata, uint32_t reg) static struct mddi_info mddi_info[2]; -static int __init mddi_clk_setup(struct platform_device *pdev, - struct mddi_info *mddi, - unsigned long clk_rate) +static int __devinit mddi_clk_setup(struct platform_device *pdev, + struct mddi_info *mddi, + unsigned long clk_rate) { int ret; -- cgit v1.2.3-70-g09d2 From 2d59dcfb54ade45cacc59a6e7bd96b8c19088c3d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 13 Apr 2012 13:32:30 -0700 Subject: cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS The OMAP driver needs a 'depends on ARCH_OMAP2PLUS' since it only builds for OMAP2+ platforms. This 'depends on' was in the original patch from Russell King, but was erroneously removed by me when making this option user-selectable in commit b09db45c (cpufreq: OMAP driver depends CPUfreq tables.) This patch remedies that. Apologies to Russell King for breaking his originally working patch. Also, thanks to Grazvydas Ignotas for reporting the same problem. Cc: Russell King Cc: Grazvydas Ignotas Signed-off-by: Kevin Hilman Signed-off-by: Linus Torvalds --- drivers/cpufreq/Kconfig.arm | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index ffbb4468591..5961e6415f0 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -4,6 +4,7 @@ config ARM_OMAP2PLUS_CPUFREQ bool "TI OMAP2+" + depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS select CPU_FREQ_TABLE -- cgit v1.2.3-70-g09d2 From 1a87228f5f1d316002c7c161316f5524592be766 Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 12 Apr 2012 15:36:34 +1000 Subject: virtio_balloon: Fix endian bug Although virtio config space fields are usually in guest-native endian, the spec for the virtio balloon device explicitly states that both fields in its config space are little-endian. However, the current virtio_balloon driver does not have a suitable endian swap for the 'num_pages' field, although it does have one for the 'actual' field. This patch corrects the bug, adding sparse annotation while we're at it. Signed-off-by: David Gibson Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_balloon.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 05f0a80818a..9e95ca60200 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -234,11 +234,14 @@ static void virtballoon_changed(struct virtio_device *vdev) static inline s64 towards_target(struct virtio_balloon *vb) { - u32 v; + __le32 v; + s64 target; + vb->vdev->config->get(vb->vdev, offsetof(struct virtio_balloon_config, num_pages), &v, sizeof(v)); - return (s64)v - vb->num_pages; + target = le32_to_cpu(v); + return target - vb->num_pages; } static void update_balloon_size(struct virtio_balloon *vb) -- cgit v1.2.3-70-g09d2 From 3ccc9372ed0fab33d20f10be3c1efd5776ff5913 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 12 Apr 2012 16:38:00 +0300 Subject: virtio_balloon: fix handling of PAGE_SIZE != 4k As reported by David Gibson, current code handles PAGE_SIZE != 4k completely wrong which can lead to guest memory corruption errors: - page_to_balloon_pfn is wrong: e.g. on system with 64K page size it gives the same pfn value for 16 different pages. - we also need to convert back to linux pfns when we free. - for each linux page we need to tell host about multiple balloon pages, but code only adds one pfn to the array. This patch fixes all that, tested with a 64k ppc64 kernel. Reported-by: David Gibson Tested-by: David Gibson Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_balloon.c | 51 +++++++++++++++++++++++++++++++++-------- 1 file changed, 41 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 9e95ca60200..c2d05a8279f 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -28,6 +28,13 @@ #include #include +/* + * Balloon device works in 4K page units. So each page is pointed to by + * multiple balloon pages. All memory counters in this driver are in balloon + * page units. + */ +#define VIRTIO_BALLOON_PAGES_PER_PAGE (PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT) + struct virtio_balloon { struct virtio_device *vdev; @@ -42,8 +49,13 @@ struct virtio_balloon /* Waiting for host to ack the pages we released. */ struct completion acked; - /* The pages we've told the Host we're not using. */ + /* Number of balloon pages we've told the Host we're not using. */ unsigned int num_pages; + /* + * The pages we've told the Host we're not using. + * Each page on this list adds VIRTIO_BALLOON_PAGES_PER_PAGE + * to num_pages above. + */ struct list_head pages; /* The array of pfns we tell the Host about. */ @@ -66,7 +78,13 @@ static u32 page_to_balloon_pfn(struct page *page) BUILD_BUG_ON(PAGE_SHIFT < VIRTIO_BALLOON_PFN_SHIFT); /* Convert pfn from Linux page size to balloon page size. */ - return pfn >> (PAGE_SHIFT - VIRTIO_BALLOON_PFN_SHIFT); + return pfn * VIRTIO_BALLOON_PAGES_PER_PAGE; +} + +static struct page *balloon_pfn_to_page(u32 pfn) +{ + BUG_ON(pfn % VIRTIO_BALLOON_PAGES_PER_PAGE); + return pfn_to_page(pfn / VIRTIO_BALLOON_PAGES_PER_PAGE); } static void balloon_ack(struct virtqueue *vq) @@ -96,12 +114,23 @@ static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq) wait_for_completion(&vb->acked); } +static void set_page_pfns(u32 pfns[], struct page *page) +{ + unsigned int i; + + /* Set balloon pfns pointing at this page. + * Note that the first pfn points at start of the page. */ + for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++) + pfns[i] = page_to_balloon_pfn(page) + i; +} + static void fill_balloon(struct virtio_balloon *vb, size_t num) { /* We can only do one array worth at a time. */ num = min(num, ARRAY_SIZE(vb->pfns)); - for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) { + for (vb->num_pfns = 0; vb->num_pfns < num; + vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) { struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN); if (!page) { @@ -113,9 +142,9 @@ static void fill_balloon(struct virtio_balloon *vb, size_t num) msleep(200); break; } - vb->pfns[vb->num_pfns] = page_to_balloon_pfn(page); + set_page_pfns(vb->pfns + vb->num_pfns, page); + vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE; totalram_pages--; - vb->num_pages++; list_add(&page->lru, &vb->pages); } @@ -130,8 +159,9 @@ static void release_pages_by_pfn(const u32 pfns[], unsigned int num) { unsigned int i; - for (i = 0; i < num; i++) { - __free_page(pfn_to_page(pfns[i])); + /* Find pfns pointing at start of each page, get pages and free them. */ + for (i = 0; i < num; i += VIRTIO_BALLOON_PAGES_PER_PAGE) { + __free_page(balloon_pfn_to_page(pfns[i])); totalram_pages++; } } @@ -143,11 +173,12 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num) /* We can only do one array worth at a time. */ num = min(num, ARRAY_SIZE(vb->pfns)); - for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) { + for (vb->num_pfns = 0; vb->num_pfns < num; + vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) { page = list_first_entry(&vb->pages, struct page, lru); list_del(&page->lru); - vb->pfns[vb->num_pfns] = page_to_balloon_pfn(page); - vb->num_pages--; + set_page_pfns(vb->pfns + vb->num_pfns, page); + vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE; } /* -- cgit v1.2.3-70-g09d2 From 919f797a4c9c22ff5ec059744dba364dc600ece2 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sat, 14 Apr 2012 23:01:28 -0400 Subject: SCSI: Fix error handling when no ULD is attached Commit 18a4d0a22ed6 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: Elric Fu Reported-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Linus Torvalds --- drivers/scsi/scsi_error.c | 2 +- include/scsi/scsi_cmnd.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 2cfcbffa41f..386f0c53bea 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -835,7 +835,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, scsi_eh_restore_cmnd(scmd, &ses); - if (sdrv->eh_action) + if (sdrv && sdrv->eh_action) rtn = sdrv->eh_action(scmd, cmnd, cmnd_size, rtn); return rtn; diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 377df4a2851..1e1198546c7 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -134,6 +134,9 @@ struct scsi_cmnd { static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) { + if (!cmd->request->rq_disk) + return NULL; + return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } -- cgit v1.2.3-70-g09d2 From ebfc5b802fa76baeb4371311ff9fc27a2258d90d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 15 Apr 2012 21:40:40 +0200 Subject: PCI: Fix regression in pci_restore_state(), v3 Commit 26f41062f28d ("PCI: check for pci bar restore completion and retry") attempted to address problems with PCI BAR restoration on systems where FLR had not been completed before pci_restore_state() was called, but it did that in an utterly wrong way. First off, instead of retrying the writes for the BAR registers only, it did that for all of the PCI config space of the device, including the status register (whose value after the write quite obviously need not be the same as the written one). Second, it added arbitrary delay to pci_restore_state() even for systems where the PCI config space restoration was successful at first attempt. Finally, the mdelay(10) it added to every iteration of the writing loop was way too much of a delay for any reasonable device. All of this actually caused resume failures for some devices on Mikko's system. To fix the regression, make pci_restore_state() only retry the writes for BAR registers and only wait if the first read from the register doesn't return the written value. Additionaly, make it wait for 1 ms, instead of 10 ms, after every failing attempt to write into config space. Reported-by: Mikko Vinni Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 57 +++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 39 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 81567441526..d20f1334792 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -967,16 +967,47 @@ pci_save_state(struct pci_dev *dev) return 0; } +static void pci_restore_config_dword(struct pci_dev *pdev, int offset, + u32 saved_val, int retry) +{ + u32 val; + + pci_read_config_dword(pdev, offset, &val); + if (val == saved_val) + return; + + for (;;) { + dev_dbg(&pdev->dev, "restoring config space at offset " + "%#x (was %#x, writing %#x)\n", offset, val, saved_val); + pci_write_config_dword(pdev, offset, saved_val); + if (retry-- <= 0) + return; + + pci_read_config_dword(pdev, offset, &val); + if (val == saved_val) + return; + + mdelay(1); + } +} + +static void pci_restore_config_space(struct pci_dev *pdev, int start, int end, + int retry) +{ + int index; + + for (index = end; index >= start; index--) + pci_restore_config_dword(pdev, 4 * index, + pdev->saved_config_space[index], + retry); +} + /** * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with */ void pci_restore_state(struct pci_dev *dev) { - int i; - u32 val; - int tries; - if (!dev->state_saved) return; @@ -984,24 +1015,14 @@ void pci_restore_state(struct pci_dev *dev) pci_restore_pcie_state(dev); pci_restore_ats_state(dev); + pci_restore_config_space(dev, 10, 15, 0); /* * The Base Address register should be programmed before the command * register(s) */ - for (i = 15; i >= 0; i--) { - pci_read_config_dword(dev, i * 4, &val); - tries = 10; - while (tries && val != dev->saved_config_space[i]) { - dev_dbg(&dev->dev, "restoring config " - "space at offset %#x (was %#x, writing %#x)\n", - i, val, (int)dev->saved_config_space[i]); - pci_write_config_dword(dev,i * 4, - dev->saved_config_space[i]); - pci_read_config_dword(dev, i * 4, &val); - mdelay(10); - tries--; - } - } + pci_restore_config_space(dev, 4, 9, 10); + pci_restore_config_space(dev, 0, 3, 0); + pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_iov_state(dev); -- cgit v1.2.3-70-g09d2 From f9bef081c3c3f77bec54454872e98d3ec635756f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 15 Apr 2012 19:53:19 +0200 Subject: drm/i915: don't clobber the special upscaling lvds timings This regression has been introduced in commit ca9bfa7eed20ea34e862804e62aae10eb159edbb Author: Daniel Vetter Date: Sat Jan 28 14:49:20 2012 +0100 drm/i915: fixup interlaced vertical timings confusion, part 1 Unfortunately that commit failed to take into account that the lvds code does some special adjustements to the crtc timings for upscaling an centering. Fix this by explicitly computing crtc timings in the lvds mode fixup function and setting a special flag in mode->private_flags if the crtc timings have been adjusted. v2: Add a comment to explain the new mode driver private flag, suggested by Eugeni Dodonov. v3: Kill the confusing and now redundant set_crtcinfo call in intel_fixed_panel_mode, noticed by Chris Wilson. Reported-and-Tested-by: Hans de Bruin Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43071 Reviewed-by: Eugeni Dodonov Reviewed-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 7 +++++-- drivers/gpu/drm/i915/intel_drv.h | 4 ++++ drivers/gpu/drm/i915/intel_lvds.c | 6 ++++++ drivers/gpu/drm/i915/intel_panel.c | 2 -- 4 files changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bae38acf44d..8be30917bce 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3478,8 +3478,11 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, return false; } - /* All interlaced capable intel hw wants timings in frames. */ - drm_mode_set_crtcinfo(adjusted_mode, 0); + /* All interlaced capable intel hw wants timings in frames. Note though + * that intel_lvds_mode_fixup does some funny tricks with the crtc + * timings, so we need to be careful not to clobber these.*/ + if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET)) + drm_mode_set_crtcinfo(adjusted_mode, 0); return true; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 5a14149b379..715afa15302 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -105,6 +105,10 @@ #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0) #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT) #define INTEL_MODE_DP_FORCE_6BPC (0x10) +/* This flag must be set by the encoder's mode_fixup if it changes the crtc + * timings in the mode to prevent the crtc fixup from overwriting them. + * Currently only lvds needs that. */ +#define INTEL_MODE_CRTC_TIMINGS_SET (0x20) static inline void intel_mode_set_pixel_multiplier(struct drm_display_mode *mode, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 95db2e98822..30e2c82101d 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -187,6 +187,8 @@ centre_horizontally(struct drm_display_mode *mode, mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos; mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width; + + mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET; } static void @@ -208,6 +210,8 @@ centre_vertically(struct drm_display_mode *mode, mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos; mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width; + + mode->private_flags |= INTEL_MODE_CRTC_TIMINGS_SET; } static inline u32 panel_fitter_scaling(u32 source, u32 target) @@ -283,6 +287,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, for_each_pipe(pipe) I915_WRITE(BCLRPAT(pipe), 0); + drm_mode_set_crtcinfo(adjusted_mode, 0); + switch (intel_lvds->fitting_mode) { case DRM_MODE_SCALE_CENTER: /* diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 230a141dbea..48177ec4720 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -47,8 +47,6 @@ intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, adjusted_mode->vtotal = fixed_mode->vtotal; adjusted_mode->clock = fixed_mode->clock; - - drm_mode_set_crtcinfo(adjusted_mode, 0); } /* adjusted_mode has been preset to be the panel's fixed mode */ -- cgit v1.2.3-70-g09d2 From 16a5e32b83fd946312b9b13590c75d20c95c5202 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Apr 2012 11:14:50 +0100 Subject: drm/radeon: disable MSI on RV515 My rv515 card is very flaky with msi enabled. Every so often it loses a rearm and never comes back, manually banging the rearm brings it back. Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_irq_kms.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 66d5fe1c817..65060b77c80 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -147,6 +147,12 @@ static bool radeon_msi_ok(struct radeon_device *rdev) (rdev->pdev->subsystem_device == 0x01fd)) return true; + /* RV515 seems to have MSI issues where it loses + * MSI rearms occasionally. This leads to lockups and freezes. + * disable it by default. + */ + if (rdev->family == CHIP_RV515) + return false; if (rdev->flags & RADEON_IS_IGP) { /* APUs work fine with MSIs */ if (rdev->family >= CHIP_PALM) -- cgit v1.2.3-70-g09d2 From 5273db706f8b673902638fee7f907909ed6ae3f9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 13 Apr 2012 10:26:36 -0400 Subject: drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Forget to unreserve after pinning. This can lead to problems in soft reset and resume. v2: rework patch as per Michel's suggestion. Signed-off-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/si.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index ac7a199ffec..27bda986fc2 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2999,8 +2999,8 @@ int si_rlc_init(struct radeon_device *rdev) } r = radeon_bo_pin(rdev->rlc.save_restore_obj, RADEON_GEM_DOMAIN_VRAM, &rdev->rlc.save_restore_gpu_addr); + radeon_bo_unreserve(rdev->rlc.save_restore_obj); if (r) { - radeon_bo_unreserve(rdev->rlc.save_restore_obj); dev_warn(rdev->dev, "(%d) pin RLC sr bo failed\n", r); si_rlc_fini(rdev); return r; @@ -3023,9 +3023,8 @@ int si_rlc_init(struct radeon_device *rdev) } r = radeon_bo_pin(rdev->rlc.clear_state_obj, RADEON_GEM_DOMAIN_VRAM, &rdev->rlc.clear_state_gpu_addr); + radeon_bo_unreserve(rdev->rlc.clear_state_obj); if (r) { - - radeon_bo_unreserve(rdev->rlc.clear_state_obj); dev_warn(rdev->dev, "(%d) pin RLC c bo failed\n", r); si_rlc_fini(rdev); return r; -- cgit v1.2.3-70-g09d2 From 8eaeb9393397be8eb700ab38a69c450975463b77 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 3 Apr 2012 11:56:51 +0300 Subject: mfd: Convert twl6040 to i2c driver, and separate it from twl core Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi Reviewed-by: Mark Brown Acked-by: Tony Lindgren Acked-by: Dmitry Torokhov Signed-off-by: Samuel Ortiz --- arch/arm/mach-omap2/board-4430sdp.c | 12 ++-- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-omap4panda.c | 13 ++-- arch/arm/mach-omap2/twl-common.c | 37 +++++++++-- arch/arm/mach-omap2/twl-common.h | 10 ++- drivers/input/misc/Kconfig | 3 +- drivers/input/misc/twl6040-vibra.c | 4 +- drivers/mfd/Kconfig | 11 +++- drivers/mfd/twl6040-core.c | 114 ++++++++++++++++++++------------- include/linux/i2c/twl.h | 12 ---- include/linux/mfd/twl6040.h | 27 ++++++++ sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/twl6040.c | 3 +- sound/soc/omap/Kconfig | 2 +- 14 files changed, 159 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a39fc4bbd2b..130ab00c09a 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_vibra_data twl6040_vibra = { +static struct twl6040_vibra_data twl6040_vibra = { .vibldrv_res = 8, .vibrdrv_res = 3, .viblmotor_res = 10, @@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = { .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .vibra = &twl6040_vibra, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .audio = &twl6040_audio, /* Regulators */ .vusim = &sdp4430_vusim, .vaux1 = &sdp4430_vaux1, @@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 74e1687b517..098d183a008 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = { static void __init omap4_i2c_init(void) { - omap4_pmic_init("twl6030", &sdp4430_twldata); + omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0); } static void __init omap4_init(void) diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index d8c0e89f012..1b782ba5343 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct twl4030_codec_data twl6040_codec = { +static struct twl6040_codec_data twl6040_codec = { /* single-step ramp for headset and handsfree */ .hs_left_step = 0x0f, .hs_right_step = 0x0f, @@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = { .hf_right_step = 0x1d, }; -static struct twl4030_audio_data twl6040_audio = { +static struct twl6040_platform_data twl6040_data = { .codec = &twl6040_codec, .audpwron_gpio = 127, - .naudint_irq = OMAP44XX_IRQ_SYS_2N, .irq_base = TWL6040_CODEC_IRQ_BASE, }; /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata = { - .audio = &twl6040_audio, -}; +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_VCXIO | TWL_COMMON_REGULATOR_VUSB | TWL_COMMON_REGULATOR_CLK32KG); - omap4_pmic_init("twl6030", &omap4_panda_twldata); + omap4_pmic_init("twl6030", &omap4_panda_twldata, + &twl6040_data, OMAP44XX_IRQ_SYS_2N); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 4b57757bf9d..7a7b89304c4 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; +static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { + { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, + }, + { + I2C_BOARD_INFO("twl6040", 0x4b), + }, +}; + void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) @@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate, omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); } +void __init omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *twl6040_data, int twl6040_irq) +{ + /* PMIC part*/ + strncpy(omap4_i2c1_board_info[0].type, pmic_type, + sizeof(omap4_i2c1_board_info[0].type)); + omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; + omap4_i2c1_board_info[0].platform_data = pmic_data; + + /* TWL6040 audio IC part */ + omap4_i2c1_board_info[1].irq = twl6040_irq; + omap4_i2c1_board_info[1].platform_data = twl6040_data; + + omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + +} + void __init omap_pmic_late_init(void) { /* Init the OMAP TWL parameters (if PMIC has been registerd) */ - if (!pmic_i2c_board_info.irq) - return; - - omap3_twl_init(); - omap4_twl_init(); + if (pmic_i2c_board_info.irq) + omap3_twl_init(); + if (omap4_i2c1_board_info[0].irq) + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index 275dde8cb27..09627483a57 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -29,6 +29,7 @@ struct twl4030_platform_data; +struct twl6040_platform_data; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type, omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); } -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} +void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data, + struct twl6040_platform_data *audio_data, int twl6040_irq); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2d787796bf5..7faf4a7fcaa 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -380,8 +380,7 @@ config INPUT_TWL4030_VIBRA config INPUT_TWL6040_VIBRA tristate "Support for TWL6040 Vibrator" - depends on TWL4030_CORE - select TWL6040_CORE + depends on TWL6040_CORE select INPUT_FF_MEMLESS help This option enables support for TWL6040 Vibrator Driver. diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 45874fed523..14e94f56cb7 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include @@ -257,7 +257,7 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); static int __devinit twl6040_vibra_probe(struct platform_device *pdev) { - struct twl4030_vibra_data *pdata = pdev->dev.platform_data; + struct twl6040_vibra_data *pdata = pdev->dev.platform_data; struct vibra_info *info; int ret; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09c..11e44386fa9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -268,10 +268,17 @@ config TWL6030_PWM This is used to control charging LED brightness. config TWL6040_CORE - bool - depends on TWL4030_CORE && GENERIC_HARDIRQS + bool "Support for TWL6040 audio codec" + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE + select REGMAP_I2C default n + help + Say yes here if you want support for Texas Instruments TWL6040 audio + codec. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device (audio, vibra). config MFD_STMPE bool "Support STMicroelectronics STMPE" diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b2d8e512d3c..2d6bedadca0 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -30,7 +30,9 @@ #include #include #include -#include +#include +#include +#include #include #include @@ -39,7 +41,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) { int ret; - u8 val = 0; + unsigned int val; mutex_lock(&twl6040->io_mutex); /* Vibra control registers from cache */ @@ -47,7 +49,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) reg == TWL6040_REG_VIBCTLR)) { val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; } else { - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + ret = regmap_read(twl6040->regmap, reg, &val); if (ret < 0) { mutex_unlock(&twl6040->io_mutex); return ret; @@ -64,7 +66,7 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) int ret; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); + ret = regmap_write(twl6040->regmap, reg, val); /* Cache the vibra control registers */ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; @@ -77,16 +79,9 @@ EXPORT_SYMBOL(twl6040_reg_write); int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val |= mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, mask); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -95,16 +90,9 @@ EXPORT_SYMBOL(twl6040_set_bits); int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val &= ~mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, 0); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -494,32 +482,58 @@ static struct resource twl6040_codec_rsrc[] = { }, }; -static int __devinit twl6040_probe(struct platform_device *pdev) +static bool twl6040_readable_reg(struct device *dev, unsigned int reg) { - struct twl4030_audio_data *pdata = pdev->dev.platform_data; + /* Register 0 is not readable */ + if (!reg) + return false; + return true; +} + +static struct regmap_config twl6040_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TWL6040_REG_STATUS, /* 0x2e */ + + .readable_reg = twl6040_readable_reg, +}; + +static int __devinit twl6040_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct twl6040_platform_data *pdata = client->dev.platform_data; struct twl6040 *twl6040; struct mfd_cell *cell = NULL; int ret, children = 0; if (!pdata) { - dev_err(&pdev->dev, "Platform data is missing\n"); + dev_err(&client->dev, "Platform data is missing\n"); return -EINVAL; } /* In order to operate correctly we need valid interrupt config */ - if (!pdata->naudint_irq || !pdata->irq_base) { - dev_err(&pdev->dev, "Invalid IRQ configuration\n"); + if (!client->irq || !pdata->irq_base) { + dev_err(&client->dev, "Invalid IRQ configuration\n"); return -EINVAL; } - twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); - if (!twl6040) - return -ENOMEM; + twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), + GFP_KERNEL); + if (!twl6040) { + ret = -ENOMEM; + goto err; + } + + twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config); + if (IS_ERR(twl6040->regmap)) { + ret = PTR_ERR(twl6040->regmap); + goto err; + } - platform_set_drvdata(pdev, twl6040); + i2c_set_clientdata(client, twl6040); - twl6040->dev = &pdev->dev; - twl6040->irq = pdata->naudint_irq; + twl6040->dev = &client->dev; + twl6040->irq = client->irq; twl6040->irq_base = pdata->irq_base; mutex_init(&twl6040->mutex); @@ -588,12 +602,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev) } if (children) { - ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, + ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, NULL, 0); if (ret) goto mfd_err; } else { - dev_err(&pdev->dev, "No platform data found for children\n"); + dev_err(&client->dev, "No platform data found for children\n"); ret = -ENODEV; goto mfd_err; } @@ -608,14 +622,15 @@ gpio2_err: if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); gpio1_err: - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); +err: return ret; } -static int __devexit twl6040_remove(struct platform_device *pdev) +static int __devexit twl6040_remove(struct i2c_client *client) { - struct twl6040 *twl6040 = platform_get_drvdata(pdev); + struct twl6040 *twl6040 = i2c_get_clientdata(client); if (twl6040->power_count) twl6040_power(twl6040, 0); @@ -626,23 +641,30 @@ static int __devexit twl6040_remove(struct platform_device *pdev) free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); twl6040_irq_exit(twl6040); - mfd_remove_devices(&pdev->dev); - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + mfd_remove_devices(&client->dev); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); return 0; } -static struct platform_driver twl6040_driver = { +static const struct i2c_device_id twl6040_i2c_id[] = { + { "twl6040", 0, }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); + +static struct i2c_driver twl6040_driver = { + .driver = { + .name = "twl6040", + .owner = THIS_MODULE, + }, .probe = twl6040_probe, .remove = __devexit_p(twl6040_remove), - .driver = { - .owner = THIS_MODULE, - .name = "twl6040", - }, + .id_table = twl6040_i2c_id, }; -module_platform_driver(twl6040_driver); +module_i2c_driver(twl6040_driver); MODULE_DESCRIPTION("TWL6040 MFD"); MODULE_AUTHOR("Misael Lopez Cruz "); diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 2463b610033..1f90de0cfdb 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -666,23 +666,11 @@ struct twl4030_codec_data { unsigned int check_defaults:1; unsigned int reset_registers:1; unsigned int hs_extmute:1; - u16 hs_left_step; - u16 hs_right_step; - u16 hf_left_step; - u16 hf_right_step; void (*set_hs_extmute)(int mute); }; struct twl4030_vibra_data { unsigned int coexist; - - /* twl6040 */ - unsigned int vibldrv_res; /* left driver resistance */ - unsigned int vibrdrv_res; /* right driver resistance */ - unsigned int viblmotor_res; /* left motor resistance */ - unsigned int vibrmotor_res; /* right motor resistance */ - int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ - int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ }; struct twl4030_audio_data { diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 9bc9ac651da..b15b5f03f5c 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -174,8 +174,35 @@ #define TWL6040_SYSCLK_SEL_LPPLL 0 #define TWL6040_SYSCLK_SEL_HPPLL 1 +struct twl6040_codec_data { + u16 hs_left_step; + u16 hs_right_step; + u16 hf_left_step; + u16 hf_right_step; +}; + +struct twl6040_vibra_data { + unsigned int vibldrv_res; /* left driver resistance */ + unsigned int vibrdrv_res; /* right driver resistance */ + unsigned int viblmotor_res; /* left motor resistance */ + unsigned int vibrmotor_res; /* right motor resistance */ + int vddvibl_uV; /* VDDVIBL volt, set 0 for fixed reg */ + int vddvibr_uV; /* VDDVIBR volt, set 0 for fixed reg */ +}; + +struct twl6040_platform_data { + int audpwron_gpio; /* audio power-on gpio */ + unsigned int irq_base; + + struct twl6040_codec_data *codec; + struct twl6040_vibra_data *vibra; +}; + +struct regmap; + struct twl6040 { struct device *dev; + struct regmap *regmap; struct mutex mutex; struct mutex io_mutex; struct mutex irq_mutex; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6508e8b790b..59d8efaa17e 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -57,7 +57,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE - select SND_SOC_TWL6040 if TWL4030_CORE + select SND_SOC_TWL6040 if TWL6040_CORE select SND_SOC_UDA134X select SND_SOC_UDA1380 if I2C select SND_SOC_WL1273 if MFD_WL1273_CORE @@ -276,7 +276,6 @@ config SND_SOC_TWL4030 tristate config SND_SOC_TWL6040 - select TWL6040_CORE tristate config SND_SOC_UDA134X diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index 2d8c6b825e5..dc7509b9d53 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -1528,7 +1527,7 @@ static int twl6040_resume(struct snd_soc_codec *codec) static int twl6040_probe(struct snd_soc_codec *codec) { struct twl6040_data *priv; - struct twl4030_codec_data *pdata = dev_get_platdata(codec->dev); + struct twl6040_codec_data *pdata = dev_get_platdata(codec->dev); struct platform_device *pdev = container_of(codec->dev, struct platform_device, dev); int ret = 0; diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index e00dd0b1139..deafbfaacdb 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -97,7 +97,7 @@ config SND_OMAP_SOC_SDP3430 config SND_OMAP_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" - depends on TWL4030_CORE && SND_OMAP_SOC && ARCH_OMAP4 + depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 select SND_OMAP_SOC_DMIC select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040 -- cgit v1.2.3-70-g09d2 From 1fcb57d0f6e1150003d222051aaaf4bc4a9ccc94 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Mon, 19 Mar 2012 12:12:47 +0530 Subject: ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue It is observed that the echi ports of 3430 sdp board are not working due to the random timing of programming the associated GPIOs of the ULPI PHYs of the EHCI for reset. If the PHYs are reset at during usbhs core driver, host ports will not work because EHCI driver is loaded after the resetting PHYs. The PHYs should be in reset state while initializing the EHCI controller. The code which does the GPIO pins associated with the PHYs are programmed to reset is moved from the USB host core driver to EHCI driver. Signed-off-by: Keshava Munegowda Reviewed-by: Partha Basak Acked-by: Felipe Balbi Tested-by: Igor Grinberg Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 44 -------------------------------------------- drivers/usb/host/ehci-omap.c | 39 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 37 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 95a2e546a48..c8aae6640e6 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -502,19 +501,6 @@ static void omap_usbhs_init(struct device *dev) pm_runtime_get_sync(dev); spin_lock_irqsave(&omap->lock, flags); - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -593,39 +579,10 @@ static void omap_usbhs_init(struct device *dev) usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); } - if (pdata->ehci_data->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[1], 1); - } - spin_unlock_irqrestore(&omap->lock, flags); pm_runtime_put_sync(dev); } -static void omap_usbhs_deinit(struct device *dev) -{ - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_free(pdata->ehci_data->reset_gpio_port[0]); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_free(pdata->ehci_data->reset_gpio_port[1]); - } -} - /** * usbhs_omap_probe - initialize TI-based HCDs @@ -860,7 +817,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); - omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bba9850f32f..5c78f9e7146 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -42,6 +42,7 @@ #include #include #include +#include /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -191,6 +192,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_request_one(pdata->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_request_one(pdata->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -237,6 +251,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1); + if (pdata->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_set_value(pdata->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_set_value(pdata->reset_gpio_port[1], 1); + } + return 0; err_add_hcd: @@ -259,8 +286,9 @@ err_io: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; usb_remove_hcd(hcd); disable_put_regulator(dev->platform_data); @@ -269,6 +297,13 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) pm_runtime_put_sync(dev); pm_runtime_disable(dev); + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_free(pdata->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_free(pdata->reset_gpio_port[1]); + } return 0; } -- cgit v1.2.3-70-g09d2 From 02269ab10f1130d35dc35db72ab026d16ba31abf Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Thu, 12 Apr 2012 15:33:34 +0400 Subject: mfd: Fix asic3_gpio_to_irq Assumption that irq numbers of asic3 gpios start at IRQ_BOARD_START is certainly wrong - driver may as well use any other base for its irqs (consider for example the imaginary case of two ASIC3 chips onboard) Furthermore, some platforms even don't have IRQ_BOARD_START defined, so driver will fail to build on them: ------------------------------------------------------- drivers/mfd/asic3.c: In function 'asic3_gpio_to_irq': drivers/mfd/asic3.c:530: error: 'IRQ_BOARD_START' undeclared (first use in this function) drivers/mfd/asic3.c:530: error: (Each undeclared identifier is reported only once drivers/mfd/asic3.c:530: error: for each function it appears in.) ------------------------------------------------------- Fix it by using irq_base from driver data. Signed-off-by: Dmitry Artamonow Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 1895cf9fab8..1582c3d9525 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -527,7 +527,9 @@ static void asic3_gpio_set(struct gpio_chip *chip, static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO; + struct asic3 *asic = container_of(chip, struct asic3, gpio); + + return (offset < ASIC3_NUM_GPIOS) ? asic->irq_base + offset : -ENXIO; } static __init int asic3_gpio_probe(struct platform_device *pdev, -- cgit v1.2.3-70-g09d2 From c291be9dba370ba696a0d482249a212cf5c15f45 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 16 Apr 2012 15:16:42 +0100 Subject: drm/i915: Hold mode_config lock whilst changing mode for lastclose() Upon lastclose(), we switch back to the fbcon configuration. This requires taking the mode_config lock in order to serialise the change with output probing elsewhere. Reported-by: Oleksij Rempel References: https://bugs.freedesktop.org/show_bug.cgi?id=48652 Signed-off-by: Chris Wilson Cc: stable@kernel.org Acked-by: Jesse Barnes Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_fb.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 19ecd78b8a2..6e9ee33fd41 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -279,6 +279,8 @@ void intel_fb_restore_mode(struct drm_device *dev) struct drm_mode_config *config = &dev->mode_config; struct drm_plane *plane; + mutex_lock(&dev->mode_config.mutex); + ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper); if (ret) DRM_DEBUG("failed to restore crtc mode\n"); @@ -286,4 +288,6 @@ void intel_fb_restore_mode(struct drm_device *dev) /* Be sure to shut off any planes that may be active */ list_for_each_entry(plane, &config->plane_list, head) plane->funcs->disable_plane(plane); + + mutex_unlock(&dev->mode_config.mutex); } -- cgit v1.2.3-70-g09d2 From 82ea267f7dc853a5e6a724916a70a10656efdfc2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 16 Apr 2012 21:24:32 +0200 Subject: mfd: Fix modular builds of rc5t583 regulator support The combination of commit 1b1247dd75aa5cf5fae54a3bec7280046e9c7957 "mfd: Add support for RICOH PMIC RC5T583" and commit 6ffc3270210efa2bea526953a142ffc908f5bd86 "regulator: Add support for RICOH PMIC RC5T583 regulator" are causing the i386 allmodconfig builds to fail with this: ERROR: "rc5t583_update" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_set_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_clear_bits" [drivers/regulator/rc5t583-regulator.ko] undefined! ERROR: "rc5t583_read" [drivers/regulator/rc5t583-regulator.ko] undefined! and this: ERROR: "rc5t583_ext_power_req_config" [drivers/regulator/rc5t583-regulator.ko] undefined! For the 1st four, make the simple ops static inline, instead of polluting the namespace with trivial exports. For the last one, add an EXPORT_SYMBOL. Signed-off-by: Paul Gortmaker Signed-off-by: Samuel Ortiz --- drivers/mfd/rc5t583.c | 39 +------------------------------------ include/linux/mfd/rc5t583.h | 47 +++++++++++++++++++++++++++++++++++++-------- 2 files changed, 40 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 99ef944c621..44afae0a69c 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -80,44 +80,6 @@ static struct mfd_cell rc5t583_subdevs[] = { {.name = "rc5t583-key", } }; -int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_write(rc5t583->regmap, reg, val); -} - -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - unsigned int ival; - int ret; - ret = regmap_read(rc5t583->regmap, reg, &ival); - if (!ret) - *val = (uint8_t)ival; - return ret; -} - -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); -} - -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); -} - -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, mask, val); -} - static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, int id, int ext_pwr, int slots) { @@ -197,6 +159,7 @@ int rc5t583_ext_power_req_config(struct device *dev, int ds_id, ds_id, ext_pwr_req); return 0; } +EXPORT_SYMBOL(rc5t583_ext_power_req_config); static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, struct rc5t583_platform_data *pdata) diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index a2c61609d21..0b64b19d81a 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -26,6 +26,7 @@ #include #include +#include #define RC5T583_MAX_REGS 0xF8 @@ -279,14 +280,44 @@ struct rc5t583_platform_data { bool enable_shutdown; }; -int rc5t583_write(struct device *dev, u8 reg, uint8_t val); -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val); -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask); -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask); +static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_write(rc5t583->regmap, reg, val); +} + +static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + ret = regmap_read(rc5t583->regmap, reg, &ival); + if (!ret) + *val = (uint8_t)ival; + return ret; +} + +static inline int rc5t583_set_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); +} + +static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg, + unsigned int bit_mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); +} + +static inline int rc5t583_update(struct device *dev, unsigned int reg, + unsigned int val, unsigned int mask) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(dev); + return regmap_update_bits(rc5t583->regmap, reg, mask, val); +} + int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id, int ext_pwr_req, int deepsleep_slot_nr); int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base); -- cgit v1.2.3-70-g09d2 From a6cb9ee7cabe68002c3f2ab07224ea27d2617cf1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 16 Apr 2012 23:07:50 +0200 Subject: PCI: Retry BARs restoration for Type 0 headers only Some shortcomings introduced into pci_restore_state() by commit 26f41062f28d ("PCI: check for pci bar restore completion and retry") have been fixed by recent commit ebfc5b802fa76 ("PCI: Fix regression in pci_restore_state(), v3"), but that commit treats all PCI devices as those with Type 0 configuration headers. That is not entirely correct, because Type 1 and Type 2 headers have different layouts. In particular, the area occupied by BARs in Type 0 config headers contains the secondary status register in Type 1 ones and it doesn't make sense to retry the restoration of that register even if the value read back from it after a write is not the same as the written one (it very well may be different). For this reason, make pci_restore_state() only retry the restoration of BARs for Type 0 config headers. This effectively makes it behave as before commit 26f41062f28d for all header types except for Type 0. Tested-by: Mikko Vinni Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d20f1334792..111569ccab4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -991,8 +991,8 @@ static void pci_restore_config_dword(struct pci_dev *pdev, int offset, } } -static void pci_restore_config_space(struct pci_dev *pdev, int start, int end, - int retry) +static void pci_restore_config_space_range(struct pci_dev *pdev, + int start, int end, int retry) { int index; @@ -1002,6 +1002,18 @@ static void pci_restore_config_space(struct pci_dev *pdev, int start, int end, retry); } +static void pci_restore_config_space(struct pci_dev *pdev) +{ + if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) { + pci_restore_config_space_range(pdev, 10, 15, 0); + /* Restore BARs before the command register. */ + pci_restore_config_space_range(pdev, 4, 9, 10); + pci_restore_config_space_range(pdev, 0, 3, 0); + } else { + pci_restore_config_space_range(pdev, 0, 15, 0); + } +} + /** * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with @@ -1015,13 +1027,7 @@ void pci_restore_state(struct pci_dev *dev) pci_restore_pcie_state(dev); pci_restore_ats_state(dev); - pci_restore_config_space(dev, 10, 15, 0); - /* - * The Base Address register should be programmed before the command - * register(s) - */ - pci_restore_config_space(dev, 4, 9, 10); - pci_restore_config_space(dev, 0, 3, 0); + pci_restore_config_space(dev); pci_restore_pcix_state(dev); pci_restore_msi_state(dev); -- cgit v1.2.3-70-g09d2 From 6b5e7d9ef793c55d72679f058514f33c4258f286 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 15 Apr 2012 11:27:12 +0200 Subject: xen/grant-table: add error-handling code on failure of gnttab_resume Jump to the label ini_nomem as done on the failure of the page allocations above. The code at ini_nomem is modified to accommodate different return values. Signed-off-by: Julia Lawall Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/grant-table.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 1cd94daa71d..f805918a993 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -1026,6 +1026,7 @@ int gnttab_init(void) int i; unsigned int max_nr_glist_frames, nr_glist_frames; unsigned int nr_init_grefs; + int ret; nr_grant_frames = 1; boot_max_nr_grant_frames = __max_nr_grant_frames(); @@ -1044,12 +1045,16 @@ int gnttab_init(void) nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; for (i = 0; i < nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL); - if (gnttab_list[i] == NULL) + if (gnttab_list[i] == NULL) { + ret = -ENOMEM; goto ini_nomem; + } } - if (gnttab_resume() < 0) - return -ENODEV; + if (gnttab_resume() < 0) { + ret = -ENODEV; + goto ini_nomem; + } nr_init_grefs = nr_grant_frames * GREFS_PER_GRANT_FRAME; @@ -1067,7 +1072,7 @@ int gnttab_init(void) for (i--; i >= 0; i--) free_page((unsigned long)gnttab_list[i]); kfree(gnttab_list); - return -ENOMEM; + return ret; } EXPORT_SYMBOL_GPL(gnttab_init); -- cgit v1.2.3-70-g09d2 From 5509fea59bb1bad4ead7d9a194cb4555c1350e1c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 Apr 2012 12:52:53 +0200 Subject: leds-atmel-pwm.c: Make pwmled_probe() __devinit Commit 892a884 (leds: convert led platform drivers to module_platform_driver) is omitting the section mismatch error: so change annotation of the probe function to __devinit instead of __init. Signed-off-by: Nicolas Ferre Cc: Richard Purdie Cc: Andrew Morton --- drivers/leds/leds-atmel-pwm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c index 800243b6037..64ad702a2ec 100644 --- a/drivers/leds/leds-atmel-pwm.c +++ b/drivers/leds/leds-atmel-pwm.c @@ -35,7 +35,7 @@ static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b) * NOTE: we reuse the platform_data structure of GPIO leds, * but repurpose its "gpio" number as a PWM channel number. */ -static int __init pwmled_probe(struct platform_device *pdev) +static int __devinit pwmled_probe(struct platform_device *pdev) { const struct gpio_led_platform_data *pdata; struct pwmled *leds; -- cgit v1.2.3-70-g09d2 From b548a27b2e92ad171cc8b8d00bac5e15bb2d2956 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 Apr 2012 14:35:38 +0200 Subject: USB: ohci-at91: change annotations for probe/remove functions Add __devinit and __devexit on *_probe() and *_remove() functions with proper modification of struct platform_driver. Signed-off-by: Nicolas Ferre Acked-by: Alan Stern Cc: linux-usb@vger.kernel.org --- drivers/usb/host/ohci-at91.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 09f597ad6e0..13ebeca8e73 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); +static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -108,7 +108,7 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -static int usb_hcd_at91_probe(const struct hc_driver *driver, +static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver, struct platform_device *pdev) { int retval; @@ -203,7 +203,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, * context, "rmmod" or something similar. * */ -static void usb_hcd_at91_remove(struct usb_hcd *hcd, +static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); @@ -545,7 +545,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) +static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; @@ -620,7 +620,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) +static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev) { struct at91_usbh_data *pdata = pdev->dev.platform_data; int i; @@ -696,7 +696,7 @@ MODULE_ALIAS("platform:at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, - .remove = ohci_hcd_at91_drv_remove, + .remove = __devexit_p(ohci_hcd_at91_drv_remove), .shutdown = usb_hcd_platform_shutdown, .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, -- cgit v1.2.3-70-g09d2 From 70756027b0a01cb0bebf2e20d8d28e8103025734 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 16 Apr 2012 10:58:12 +0200 Subject: USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt Now that we are using irqdomains, we need to convert GPIO pins to Linux IRQ numbers using the gpio_to_irq() function. This call is added to request/free_irq calls. Signed-off-by: Nicolas Ferre Acked-by: Felipe Balbi Cc: linux-usb@vger.kernel.org --- drivers/usb/gadget/at91_udc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 0c935d7c65b..9d7bcd91007 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev) mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT); } else { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, - 0, driver_name, udc)) { + if (request_irq(gpio_to_irq(udc->board.vbus_pin), + at91_vbus_irq, 0, driver_name, udc)) { DBG("request vbus irq %d failed\n", udc->board.vbus_pin); retval = -EBUSY; @@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return 0; fail4: if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled) - free_irq(udc->board.vbus_pin, udc); + free_irq(gpio_to_irq(udc->board.vbus_pin), udc); fail3: if (gpio_is_valid(udc->board.vbus_pin)) gpio_free(udc->board.vbus_pin); @@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (gpio_is_valid(udc->board.vbus_pin)) { - free_irq(udc->board.vbus_pin, udc); + free_irq(gpio_to_irq(udc->board.vbus_pin), udc); gpio_free(udc->board.vbus_pin); } free_irq(udc->udp_irq, udc); -- cgit v1.2.3-70-g09d2 From f898fed0c27b2d46c3d8331e7825c25b6432b9f4 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 15 Mar 2012 11:31:58 +0100 Subject: dmaengine: Kconfig: fix Atmel at_hdmac entry Remove SoC dependency and make it generic for every Atmel ARM AT91. That will allow to select this driver for newer chips. Keep dependency on AT91 because of the use of an header file located in include/mach directory. Modify the comment to reflect this. Signed-off-by: Nicolas Ferre Acked-by: Vinod Koul --- drivers/dma/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index cf9da362d64..ef378b5b17e 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -91,11 +91,10 @@ config DW_DMAC config AT_HDMAC tristate "Atmel AHB DMA support" - depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 + depends on ARCH_AT91 select DMA_ENGINE help - Support the Atmel AHB DMA controller. This can be integrated in - chips such as the Atmel AT91SAM9RL. + Support the Atmel AHB DMA controller. config FSL_DMA tristate "Freescale Elo and Elo Plus DMA support" -- cgit v1.2.3-70-g09d2 From e8e937be971d706061dc56220ff3605ab77622a7 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Tue, 3 Apr 2012 18:05:47 +0100 Subject: xen/gntdev: do not set VM_PFNMAP Since we are using the m2p_override we do have struct pages corresponding to the user vma mmap'ed by gntdev. Removing the VM_PFNMAP flag makes get_user_pages work on that vma. An example test case would be using a Xen userspace block backend (QDISK) on a file on NFS using O_DIRECT. CC: stable@kernel.org Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 99d8151c824..1ffd03bf8e1 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -722,7 +722,7 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED|VM_DONTEXPAND; if (use_ptemod) - vma->vm_flags |= VM_DONTCOPY|VM_PFNMAP; + vma->vm_flags |= VM_DONTCOPY; vma->vm_private_data = map; -- cgit v1.2.3-70-g09d2 From 8963c487a80b4688c9e68dcc504a90074aacc145 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 17 Apr 2012 15:22:39 -0400 Subject: USB: fix deadlock in bConfigurationValue attribute method This patch (as154) fixes a self-deadlock that occurs when userspace writes to the bConfigurationValue sysfs attribute for a hub with children. The task tries to lock the bandwidth_mutex at a time when it already owns the lock: The attribute's method calls usb_set_configuration(), which calls usb_disable_device() with the bandwidth_mutex held. usb_disable_device() unregisters the existing interfaces, which causes the hub driver to be unbound. The hub_disconnect() routine calls hub_quiesce(), which calls usb_disconnect() for each of the hub's children. usb_disconnect() attempts to acquire the bandwidth_mutex around a call to usb_disable_device(). The solution is to make usb_disable_device() acquire the mutex for itself instead of requiring the caller to hold it. Then the mutex can cover only the bandwidth deallocation operation and not the region where the interfaces are unregistered. This has the potential to change system behavior slightly when a config change races with another config or altsetting change. Some of the bandwidth released from the old config might get claimed by the other config or altsetting, make it impossible to restore the old config in case of a failure. But since we don't try to recover from config-change failures anyway, this doesn't matter. [This should be marked for stable kernels that contain the commit fccf4e86200b8f5edd9a65da26f150e32ba79808 "USB: Free bandwidth when usb_disable_device is called." That commit was marked for stable kernels as old as 2.6.32.] Signed-off-by: Alan Stern Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 3 --- drivers/usb/core/message.c | 6 +++--- 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a2aa9d652c6..ec6c97dadbe 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1667,7 +1667,6 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; int i; - struct usb_hcd *hcd = bus_to_hcd(udev->bus); /* mark the device as inactive, so any further urb submissions for * this device (and any of its children) will fail immediately. @@ -1690,9 +1689,7 @@ void usb_disconnect(struct usb_device **pdev) * so that the hardware is now fully quiesced. */ dev_dbg (&udev->dev, "unregistering device\n"); - mutex_lock(hcd->bandwidth_mutex); usb_disable_device(udev, 0); - mutex_unlock(hcd->bandwidth_mutex); usb_hcd_synchronize_unlinks(udev); usb_remove_ep_devs(&udev->ep0); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index aed3e07942d..ca717da3be9 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1136,8 +1136,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, * Deallocates hcd/hardware state for the endpoints (nuking all or most * pending urbs) and usbcore state for the interfaces, so that usbcore * must usb_set_configuration() before any interfaces could be used. - * - * Must be called with hcd->bandwidth_mutex held. */ void usb_disable_device(struct usb_device *dev, int skip_ep0) { @@ -1190,7 +1188,9 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) usb_disable_endpoint(dev, i + USB_DIR_IN, false); } /* Remove endpoints from the host controller internal state */ + mutex_lock(hcd->bandwidth_mutex); usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + mutex_unlock(hcd->bandwidth_mutex); /* Second pass: remove endpoint pointers */ } for (i = skip_ep0; i < 16; ++i) { @@ -1750,7 +1750,6 @@ free_interfaces: /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ - mutex_lock(hcd->bandwidth_mutex); if (dev->state != USB_STATE_ADDRESS) usb_disable_device(dev, 1); /* Skip ep0 */ @@ -1763,6 +1762,7 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { mutex_unlock(hcd->bandwidth_mutex); -- cgit v1.2.3-70-g09d2 From e65cdfae71cecec0fcd43a3f9ac8b5e4ae52db08 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 9 Apr 2012 15:48:55 -0400 Subject: usb: usbtest: avoid integer overflow in test_ctrl_queue() Avoid overflowing context.count = param->sglen * param->iterations, where both `sglen' and `iterations' are from userspace. | test_ctrl_queue() | usbtest_ioctl() Keep -EOPNOTSUPP for error code. Signed-off-by: Xi Wang Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 959145baf3c..967254afb6e 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -904,6 +904,9 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param) struct ctrl_ctx context; int i; + if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen) + return -EOPNOTSUPP; + spin_lock_init(&context.lock); context.dev = dev; init_completion(&context.complete); @@ -1981,8 +1984,6 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) /* queued control messaging */ case 10: - if (param->sglen == 0) - break; retval = 0; dev_info(&intf->dev, "TEST 10: queue %d control calls, %d times\n", -- cgit v1.2.3-70-g09d2 From 8bde9a62ee74afa89f593c563e926d163b1f6ada Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 9 Apr 2012 15:48:45 -0400 Subject: usb: usbtest: avoid integer overflow in alloc_sglist() A large `nents' from userspace could overflow the allocation size, leading to memory corruption. | alloc_sglist() | usbtest_ioctl() Use kmalloc_array() to avoid the overflow. Signed-off-by: Xi Wang Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 967254afb6e..cac67dea2ba 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -423,7 +423,7 @@ alloc_sglist(int nents, int max, int vary) unsigned i; unsigned size = max; - sg = kmalloc(nents * sizeof *sg, GFP_KERNEL); + sg = kmalloc_array(nents, sizeof *sg, GFP_KERNEL); if (!sg) return NULL; sg_init_table(sg, nents); -- cgit v1.2.3-70-g09d2 From 749541d19e70905e3971f2a08335a206a98e4d0c Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 17 Apr 2012 21:37:29 +0200 Subject: USB: sierra: avoid QMI/wwan interface on MC77xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit These devices have a number of non serial interfaces as well. Use the existing "Direct IP" blacklist to prevent binding to interfaces which are handled by other drivers. We also extend the "Direct IP" blacklist with with interfaces only seen in "QMI" mode, assuming that these devices use the same interface numbers for serial interfaces both in "Direct IP" and in "QMI" mode. Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index fdd5aa2c8d8..8c8bf806f6f 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -221,7 +221,7 @@ static const struct sierra_iface_info typeB_interface_list = { }; /* 'blacklist' of interfaces not served by this driver */ -static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; +static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 }; static const struct sierra_iface_info direct_ip_interface_blacklist = { .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), .ifaceinfo = direct_ip_non_serial_ifaces, @@ -289,7 +289,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ - { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */ /* Sierra Wireless C885 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ @@ -299,6 +298,9 @@ static const struct usb_device_id id_table[] = { /* Sierra Wireless HSPA Non-Composite Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x68A2), /* Sierra Wireless MC77xx in QMI mode */ + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, -- cgit v1.2.3-70-g09d2 From dc75ce9d929aabeb0843a6b1a4ab320e58ba1597 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 17 Apr 2012 15:24:15 -0400 Subject: EHCI: fix criterion for resuming the root hub This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern CC: Peter Chen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 806cc95317a..95ca07a8e1b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -910,7 +910,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) pcd_status = status; /* resume root hub? */ - if (!(cmd & CMD_RUN)) + if (ehci->rh_state == EHCI_RH_SUSPENDED) usb_hcd_resume_root_hub(hcd); /* get per-port change detect bits */ -- cgit v1.2.3-70-g09d2 From 99d9acdd0c5ce970eaf8e8671c0bc4cb7c6fb0c1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 17 Apr 2012 20:37:00 +0100 Subject: drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips Not only do the pageflip work without it at non-native modes (i.e. with the panel fitter enabled), it also causes normal (non-pageflipped) modesets to fail. Reported-by: Adam Jackson Tested-by: Adam Jackson Signed-off-by: Chris Wilson Wanted-by-for-fixes: Dave Airlie Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8be30917bce..5908cd56340 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7468,7 +7468,13 @@ static int intel_gen6_queue_flip(struct drm_device *dev, OUT_RING(fb->pitches[0] | obj->tiling_mode); OUT_RING(obj->gtt_offset); - pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + /* Contrary to the suggestions in the documentation, + * "Enable Panel Fitter" does not seem to be required when page + * flipping with a non-native mode, and worse causes a normal + * modeset to fail. + * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + */ + pf = 0; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); -- cgit v1.2.3-70-g09d2 From 3626479e482aa3247aac03724094ba6c13ea1e46 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 17 Apr 2012 18:32:19 -0300 Subject: [media] dvb_frontend: Fix a regression when switching back to DVB-S There are some softwares (Kaffeine and likely xine) that uses a DVBv5 call to switch to DVB-S2, but expects that a DVBv3 call to switch back to DVB-S. Well, this is not right, as a DVBv3 call doesn't know anything about delivery systems. However, as, by accident, this used to work, we need to restore its behavior, in order to avoid regressions with those softwares. Reported on this Fedora 16 bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=812895 Reported-by: Dieter Roever Cc: stable@kernel.org # for version 3.3 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 39696c6a4ed..0f64d718265 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1446,6 +1446,28 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) __func__); return -EINVAL; } + /* + * Get a delivery system that is compatible with DVBv3 + * NOTE: in order for this to work with softwares like Kaffeine that + * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to + * DVB-S, drivers that support both should put the SYS_DVBS entry + * before the SYS_DVBS2, otherwise it won't switch back to DVB-S. + * The real fix is that userspace applications should not use DVBv3 + * and not trust on calling FE_SET_FRONTEND to switch the delivery + * system. + */ + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + if (fe->ops.delsys[ncaps] == desired_system) { + delsys = desired_system; + break; + } + ncaps++; + } + if (delsys == SYS_UNDEFINED) { + dprintk("%s() Couldn't find a delivery system that matches %d\n", + __func__, desired_system); + } } else { /* * This is a DVBv5 call. So, it likely knows the supported @@ -1494,9 +1516,10 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) __func__); return -EINVAL; } - c->delivery_system = delsys; } + c->delivery_system = delsys; + /* * The DVBv3 or DVBv5 call is requesting a different system. So, * emulation is needed. -- cgit v1.2.3-70-g09d2 From e4459e1682c107d7ee1bf102c1ba534230e9b50b Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 5 Apr 2012 18:53:20 -0300 Subject: [media] drxk: Does not unlock mutex if sanity check failed in scu_command() If sanity check fails in scu_command(), goto error leads to unlock of an unheld mutex. The check should not fail in reality, but it nevertheless worth fixing. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/drxk_hard.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 36d11756492..a414b1f2b6a 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -1520,8 +1520,10 @@ static int scu_command(struct drxk_state *state, dprintk(1, "\n"); if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) || - ((resultLen > 0) && (result == NULL))) - goto error; + ((resultLen > 0) && (result == NULL))) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; + } mutex_lock(&state->mutex); -- cgit v1.2.3-70-g09d2 From d9b786955f80fb306471fdb9ea24c6d03af6ca36 Mon Sep 17 00:00:00 2001 From: David Härdeman Date: Sun, 8 Apr 2012 06:13:04 -0300 Subject: [media] rc-core: set mode for winbond-cir MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Setting the correct mode is required by rc-core or scancodes won't be generated (which isn't very user-friendly). This one-line fix should be suitable for 3.4-rc2. Signed-off-by: David Härdeman Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/winbond-cir.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index b09c5fae489..af526586fa2 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -1046,6 +1046,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) goto exit_unregister_led; } + data->dev->driver_type = RC_DRIVER_IR_RAW; data->dev->driver_name = WBCIR_NAME; data->dev->input_name = WBCIR_NAME; data->dev->input_phys = "wbcir/cir0"; -- cgit v1.2.3-70-g09d2 From 9ecf8c0d4f2ea5eb39e0924d9b102b5c3300f291 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 18 Apr 2012 12:29:32 +0200 Subject: Revert "ACPI: Make ACPI interrupt threaded" This reverts commit 6fe0d0628245fdcd6fad8b837c81e8f7ebc3364d. Paul bisected this regression. The conversion was done blindly and is wrong, as it does not provide a primary handler to disable the level type irq on the device level. Neither does it set the IRQF_ONESHOT flag which handles that at the irq line level. This can't be done as the interrupt might be shared, though we might extend the core to force it. So an interrupt on this line will wake up the thread, but immediately unmask the irq after that. Due to the interrupt being level type the hardware interrupt is raised over and over and prevents the irq thread from handling it. Fail. request_irq() unfortunately does not refuse such a request and the patch was obviously never tested with real interrupts. Bisected-by: Paul Bolle Signed-off-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- drivers/acpi/osl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index ba14fb93c92..c3881b2eb8b 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -607,8 +607,7 @@ acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler, acpi_irq_handler = handler; acpi_irq_context = context; - if (request_threaded_irq(irq, NULL, acpi_irq, IRQF_SHARED, "acpi", - acpi_irq)) { + if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) { printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq); acpi_irq_handler = NULL; return AE_NOT_ACQUIRED; -- cgit v1.2.3-70-g09d2 From 00250ec90963b7ef6678438888f3244985ecde14 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 9 Apr 2012 18:16:34 -0400 Subject: hwmon: fam15h_power: fix bogus values with current BIOSes Newer BKDG[1] versions recommend a different initialization value for the running average range register in the northbridge. This improves the power reading by avoiding counter saturations resulting in bogus values for anything below about 80% of TDP power consumption. Updated BIOSes will have this new value set up from the beginning, but meanwhile we correct this value ourselves. This needs to be done on all northbridges, even on those where the driver itself does not register at. This fixes the driver on all current machines to provide proper values for idle load. [1] http://support.amd.com/us/Processor_TechDocs/42301_15h_Mod_00h-0Fh_BKDG.pdf Chapter 3.8: D18F5xE0 Processor TDP Running Average (p. 452) Signed-off-by: Andre Przywara Acked-by: Jean Delvare [guenter.roeck@ericsson.com: Removed unnecessary return statement] Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ --- drivers/hwmon/fam15h_power.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index b7494af1e4a..37a8fc92b44 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -122,6 +122,38 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) return true; } +/* + * Newer BKDG versions have an updated recommendation on how to properly + * initialize the running average range (was: 0xE, now: 0x9). This avoids + * counter saturations resulting in bogus power readings. + * We correct this value ourselves to cope with older BIOSes. + */ +static void __devinit tweak_runavg_range(struct pci_dev *pdev) +{ + u32 val; + const struct pci_device_id affected_device = { + PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }; + + /* + * let this quirk apply only to the current version of the + * northbridge, since future versions may change the behavior + */ + if (!pci_match_id(&affected_device, pdev)) + return; + + pci_bus_read_config_dword(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), + REG_TDP_RUNNING_AVERAGE, &val); + if ((val & 0xf) != 0xe) + return; + + val &= ~0xf; + val |= 0x9; + pci_bus_write_config_dword(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 5), + REG_TDP_RUNNING_AVERAGE, val); +} + static void __devinit fam15h_power_init_data(struct pci_dev *f4, struct fam15h_power_data *data) { @@ -155,6 +187,13 @@ static int __devinit fam15h_power_probe(struct pci_dev *pdev, struct device *dev; int err; + /* + * though we ignore every other northbridge, we still have to + * do the tweaking on _each_ node in MCM processors as the counters + * are working hand-in-hand + */ + tweak_runavg_range(pdev); + if (!fam15h_power_is_internal_node0(pdev)) { err = -ENODEV; goto exit; -- cgit v1.2.3-70-g09d2 From 1196573fe493aeeb826468157313ee84ffbc59f3 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 9 Apr 2012 13:53:00 -0400 Subject: hwmon: (ads1015) Fix build warning The following build warning is seen in some configurations. drivers/hwmon/ads1015.c: In function 'show_in': drivers/hwmon/ads1015.c:129: warning: 'in' may be used uninitialized in this function Fix by separating the register read function from the code converting the result into mV. Signed-off-by: Guenter Roeck Cc: Dirk Eibach Reviewed-by: Robert Coulson --- drivers/hwmon/ads1015.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c index 7765e4f74ec..1958f03efd7 100644 --- a/drivers/hwmon/ads1015.c +++ b/drivers/hwmon/ads1015.c @@ -59,14 +59,11 @@ struct ads1015_data { struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; }; -static int ads1015_read_value(struct i2c_client *client, unsigned int channel, - int *value) +static int ads1015_read_adc(struct i2c_client *client, unsigned int channel) { u16 config; - s16 conversion; struct ads1015_data *data = i2c_get_clientdata(client); unsigned int pga = data->channel_data[channel].pga; - int fullscale; unsigned int data_rate = data->channel_data[channel].data_rate; unsigned int conversion_time_ms; int res; @@ -78,7 +75,6 @@ static int ads1015_read_value(struct i2c_client *client, unsigned int channel, if (res < 0) goto err_unlock; config = res; - fullscale = fullscale_table[pga]; conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]); /* setup and start single conversion */ @@ -105,33 +101,36 @@ static int ads1015_read_value(struct i2c_client *client, unsigned int channel, } res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION); - if (res < 0) - goto err_unlock; - conversion = res; - - mutex_unlock(&data->update_lock); - - *value = DIV_ROUND_CLOSEST(conversion * fullscale, 0x7ff0); - - return 0; err_unlock: mutex_unlock(&data->update_lock); return res; } +static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel, + s16 reg) +{ + struct ads1015_data *data = i2c_get_clientdata(client); + unsigned int pga = data->channel_data[channel].pga; + int fullscale = fullscale_table[pga]; + + return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0); +} + /* sysfs callback function */ static ssize_t show_in(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct i2c_client *client = to_i2c_client(dev); - int in; int res; + int index = attr->index; - res = ads1015_read_value(client, attr->index, &in); + res = ads1015_read_adc(client, index); + if (res < 0) + return res; - return (res < 0) ? res : sprintf(buf, "%d\n", in); + return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res)); } static const struct sensor_device_attribute ads1015_in[] = { -- cgit v1.2.3-70-g09d2 From 0c8d32c27f5cf6e14ca14b4758d1e994eebd50fd Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 18 Apr 2012 09:29:47 +0800 Subject: libata: forbid port runtime pm by default, fixing regression Forbid port runtime pm by default because it has known hotplug issue. User can allow it by, for example echo auto > /sys/devices/pci0000:00/0000:00:1f.2/ata2/power/control Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik --- drivers/ata/libata-transport.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index 74aaee30e26..c3419048537 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -294,6 +294,7 @@ int ata_tport_add(struct device *parent, device_enable_async_suspend(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); + pm_runtime_forbid(dev); transport_add_device(dev); transport_configure_device(dev); -- cgit v1.2.3-70-g09d2 From a71e23d9925517e609dfcb72b5874f33cdb0d2ad Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 16 Apr 2012 21:55:04 -0400 Subject: xen/blkback: Fix warning error. drivers/block/xen-blkback/xenbus.c: In function 'xen_blkbk_discard': drivers/block/xen-blkback/xenbus.c:419:4: warning: passing argument 1 of 'dev_warn' makes pointer from integer without a cast +[enabled by default] include/linux/device.h:894:5: note: expected 'const struct device *' but argument is of type 'long int' It is unclear how that mistake made it in. It surely is wrong. Acked-by: Jens Axboe Reported-by: Stephen Rothwell Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkback/xenbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 89860f34a7e..4f66171c668 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -416,7 +416,7 @@ static void xen_blkbk_discard(struct xenbus_transaction xbt, struct backend_info "discard-secure", "%d", blkif->vbd.discard_secure); if (err) { - dev_warn(dev-dev, "writing discard-secure (%d)", err); + dev_warn(&dev->dev, "writing discard-secure (%d)", err); return; } } -- cgit v1.2.3-70-g09d2 From 2fbe2bf1fd37f9d99950bd8d8093623cf22cf08b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Apr 2012 11:33:00 -0400 Subject: EHCI: always clear the STS_FLR status bit This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by: Alan Stern Reported-and-tested-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 95ca07a8e1b..4a3bc5b7a06 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -858,8 +858,13 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } + /* + * We don't use STS_FLR, but some controllers don't like it to + * remain on, so mask it out along with the other status bits. + */ + masked_status = status & (INTR_MASK | STS_FLR); + /* Shared IRQ? */ - masked_status = status & INTR_MASK; if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock(&ehci->lock); return IRQ_NONE; -- cgit v1.2.3-70-g09d2 From 9426cd05682745d1024dbabdec5631309bd2f480 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 16 Apr 2012 15:28:28 +0200 Subject: uwb: fix use of del_timer_sync() in interrupt del_timer_sync() cannot be used in interrupt. Replace it with del_timer() and a flag Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/neh.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c index a269937be1b..8cb71bb333c 100644 --- a/drivers/uwb/neh.c +++ b/drivers/uwb/neh.c @@ -107,6 +107,7 @@ struct uwb_rc_neh { u8 evt_type; __le16 evt; u8 context; + u8 completed; uwb_rc_cmd_cb_f cb; void *arg; @@ -409,6 +410,7 @@ static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size struct device *dev = &rc->uwb_dev.dev; struct uwb_rc_neh *neh; struct uwb_rceb *notif; + unsigned long flags; if (rceb->bEventContext == 0) { notif = kmalloc(size, GFP_ATOMIC); @@ -422,7 +424,11 @@ static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size } else { neh = uwb_rc_neh_lookup(rc, rceb); if (neh) { - del_timer_sync(&neh->timer); + spin_lock_irqsave(&rc->neh_lock, flags); + /* to guard against a timeout */ + neh->completed = 1; + del_timer(&neh->timer); + spin_unlock_irqrestore(&rc->neh_lock, flags); uwb_rc_neh_cb(neh, rceb, size); } else dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n", @@ -568,6 +574,10 @@ static void uwb_rc_neh_timer(unsigned long arg) unsigned long flags; spin_lock_irqsave(&rc->neh_lock, flags); + if (neh->completed) { + spin_unlock_irqrestore(&rc->neh_lock, flags); + return; + } if (neh->context) __uwb_rc_neh_rm(rc, neh); else -- cgit v1.2.3-70-g09d2 From 5bd7b419ef2eb4989b207753e088c3437159618a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 18 Apr 2012 10:05:55 +0200 Subject: uwb: fix error handling Fatal errors such as a device disconnect must not trigger error handling. The error returns must be checked. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/hwa-rc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c index 66797e9c501..810c90ae2c5 100644 --- a/drivers/uwb/hwa-rc.c +++ b/drivers/uwb/hwa-rc.c @@ -645,7 +645,8 @@ void hwarc_neep_cb(struct urb *urb) dev_err(dev, "NEEP: URB error %d\n", urb->status); } result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0) { + if (result < 0 && result != -ENODEV && result != -EPERM) { + /* ignoring unrecoverable errors */ dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n", result); goto error; -- cgit v1.2.3-70-g09d2 From f941f6922533316556d4dc6eee9c19d4a832c560 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 10 Apr 2012 10:48:11 +0200 Subject: USB: ehci-fsl: Fix kernel crash on mpc5121e Since commit 28c56ea1431421dec51b7b229369e991481453df (powerpc/usb: fix bug of kernel hang when initializing usb) the kernel crashes on mpc5121e. mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... [ 1.294596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.316491] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.337334] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.358548] Machine check in kernel mode. [ 1.375917] Caused by (from SRR1=49030): Transfer error ack signal [ 1.395505] Oops: Machine check, sig: 7 [#1] [ 1.413113] MPC5121 ADS [ 1.428718] Modules linked in: [ 1.444841] NIP: c026efc4 LR: c0278b50 CTR: 00000000 [ 1.463342] REGS: df837ba0 TRAP: 0200 Not tainted (3.3.0-08839-gb5174fa) [ 1.484083] MSR: 00049030 CR: 42042022 XER: 20000000 [ 1.504099] TASK = df834000[1] 'swapper' THREAD: df836000 [ 1.509667] GPR00: 1c000000 df837c50 df834000 df9d74e0 00000003 00000010 00000000 00000000 [ 1.531650] GPR08: 00000020 00000000 c037cdd8 e1088000 22042028 1001a69c 00000000 00000000 [ 1.553762] GPR16: 1ffbce70 00000000 1fef5b28 1fef3e08 00000000 00000000 1ffcbc7c c045b264 [ 1.575824] GPR24: 0000008b 00000002 c04a7dd0 e1088000 df33c960 df9d74e0 00000000 df9d7400 [ 1.612295] NIP [c026efc4] ehci_fsl_setup_phy+0x110/0x124 [ 1.632454] LR [c0278b50] ehci_fsl_setup+0x29c/0x304 [ 1.652065] Call Trace: [ 1.668923] [df837c50] [c0278a40] ehci_fsl_setup+0x18c/0x304 (unreliable) [ 1.690332] [df837c70] [c025cba4] usb_add_hcd+0x1f0/0x66c [ 1.710377] [df837cb0] [c0277ab8] ehci_fsl_drv_probe+0x180/0x308 [ 1.731322] [df837ce0] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.752202] [df837cf0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.773491] [df837d10] [c01f956c] bus_for_each_drv+0x6c/0xa8 [ 1.794279] [df837d40] [c01fafdc] device_attach+0xb4/0xd8 [ 1.814574] [df837d60] [c01fa44c] bus_probe_device+0xa4/0xb4 [ 1.835343] [df837d80] [c01f87a8] device_add+0x52c/0x5dc [ 1.855462] [df837dd0] [c01fcd58] platform_device_add+0x124/0x1d0 [ 1.876558] [df837df0] [c036dcec] fsl_usb2_device_register+0xa0/0xd4 [ 1.897512] [df837e10] [c036df28] fsl_usb2_mph_dr_of_probe+0x208/0x264 [ 1.918253] [df837e90] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.938300] [df837ea0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.958511] [df837ec0] [c01fb2f0] __driver_attach+0xbc/0xc0 [ 1.978088] [df837ee0] [c01f9608] bus_for_each_dev+0x60/0x9c [ 1.997589] [df837f10] [c01fab88] driver_attach+0x24/0x34 [ 2.016757] [df837f20] [c01fa744] bus_add_driver+0x1ac/0x274 [ 2.036339] [df837f50] [c01fb898] driver_register+0x88/0x150 [ 2.056052] [df837f70] [c01fcabc] platform_driver_register+0x68/0x78 [ 2.076650] [df837f80] [c0446500] fsl_usb2_mph_dr_driver_init+0x18/0x28 [ 2.097734] [df837f90] [c0003988] do_one_initcall+0x148/0x1b0 [ 2.117934] [df837fc0] [c042d89c] kernel_init+0xfc/0x190 [ 2.137667] [df837ff0] [c000d2c4] kernel_thread+0x4c/0x68 [ 2.157240] Instruction dump: [ 2.174119] 90050004 4e800020 2f840003 419e0014 2f840004 409eff64 6400c000 4bffff5c [ 2.196000] 64001000 7c0004ac 812b0500 0c090000 <4c00012c> 61290200 7c0004ac 912b0500 [ 2.218100] ---[ end trace 21659aedb84ad816 ]--- [ 2.237089] [ 3.232940] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.232954] [ 3.271575] Rebooting in 1 seconds.. Check pdata->have_sysif_regs flag before accessing system interface registers. Signed-off-by: Anatolij Gustschin Cc: Shengzhou Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3e7345172e0..d0a84bd3f3e 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -218,6 +218,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, u32 portsc; struct usb_hcd *hcd = ehci_to_hcd(ehci); void __iomem *non_ehci = hcd->regs; + struct fsl_usb2_platform_data *pdata; + + pdata = hcd->self.controller->platform_data; portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); @@ -234,7 +237,9 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, /* fall through */ case FSL_USB2_PHY_UTMI: /* enable UTMI PHY */ - setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); + if (pdata->have_sysif_regs) + setbits32(non_ehci + FSL_SOC_USB_CTRL, + CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: -- cgit v1.2.3-70-g09d2 From f4a728d09a96d6a83d9c3f39035b1aa7726892ea Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 25 Mar 2012 21:08:32 +0200 Subject: drivers/usb/misc/usbtest.c: add kfrees Free the two previously allocated buffers before exiting the function in an error case. Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index cac67dea2ba..9dcb68f04f0 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2277,6 +2277,8 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id) if (status < 0) { WARNING(dev, "couldn't get endpoints, %d\n", status); + kfree(dev->buf); + kfree(dev); return status; } /* may find bulk or ISO pipes */ -- cgit v1.2.3-70-g09d2 From 523fc5c14f6cad283e5a266eba0e343aed6e73d5 Mon Sep 17 00:00:00 2001 From: Tomoki Sekiyama Date: Fri, 30 Mar 2012 08:51:28 +0900 Subject: USB: yurex: Remove allocation of coherent buffer for setup-packet buffer Removes allocation of coherent buffer for the control-request setup-packet buffer from the yurex driver. Using coherent buffers for setup-packet is obsolete and does not work with some USB host implementations. Signed-off-by: Tomoki Sekiyama Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 897edda4227..a4a76fcd41c 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -99,9 +99,7 @@ static void yurex_delete(struct kref *kref) usb_put_dev(dev->udev); if (dev->cntl_urb) { usb_kill_urb(dev->cntl_urb); - if (dev->cntl_req) - usb_free_coherent(dev->udev, YUREX_BUF_SIZE, - dev->cntl_req, dev->cntl_urb->setup_dma); + kfree(dev->cntl_req); if (dev->cntl_buffer) usb_free_coherent(dev->udev, YUREX_BUF_SIZE, dev->cntl_buffer, dev->cntl_urb->transfer_dma); @@ -234,9 +232,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ } /* allocate buffer for control req */ - dev->cntl_req = usb_alloc_coherent(dev->udev, YUREX_BUF_SIZE, - GFP_KERNEL, - &dev->cntl_urb->setup_dma); + dev->cntl_req = kmalloc(YUREX_BUF_SIZE, GFP_KERNEL); if (!dev->cntl_req) { err("Could not allocate cntl_req"); goto error; -- cgit v1.2.3-70-g09d2 From 532f17b5d59bf0deb6f1ff9bc1fb27d5b5011c09 Mon Sep 17 00:00:00 2001 From: Tomoki Sekiyama Date: Fri, 30 Mar 2012 08:51:36 +0900 Subject: USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urb Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb structure, and this causes BUG_ON with some USB host implementations. This patch fixes the issue. Signed-off-by: Tomoki Sekiyama Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index a4a76fcd41c..70201462e19 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -282,7 +282,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ usb_rcvintpipe(dev->udev, dev->int_in_endpointAddr), dev->int_buffer, YUREX_BUF_SIZE, yurex_interrupt, dev, 1); - dev->cntl_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + dev->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; if (usb_submit_urb(dev->urb, GFP_KERNEL)) { retval = -EIO; err("Could not submitting URB"); -- cgit v1.2.3-70-g09d2 From 8034761c219ce545a9f4d3b23cfda47a0027cc8c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 18 Apr 2012 14:43:40 -0600 Subject: USB: ehci-tegra: don't call set_irq_flags(IRQF_VALID) This call is not needed; the IRQ controller should (and does) set up interrupts correctly. set_irq_flags() isn't exported to modules, to this also fixes compilation of ehci-tegra.c as a module. Signed-off-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 73544bd440b..86183366647 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -731,7 +731,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = -ENODEV; goto fail; } - set_irq_flags(irq, IRQF_VALID); #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { -- cgit v1.2.3-70-g09d2 From 7a6fbc9a887193a1e9f8658703881c528040afbc Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 27 Mar 2012 12:22:49 +0400 Subject: ARM: clps711x: serial driver hungs are a result of call disable_irq within ISR Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result of call disable_irq from ISR. synchronize_irq waits for end of interrupt and goes to infinite loop. This patch fix this problem. Signed-off-by: Alexander Shiyan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/clps711x.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index e6c3dbd781d..836fe273123 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -154,10 +154,9 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) port->x_char = 0; return IRQ_HANDLED; } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - clps711xuart_stop_tx(port); - return IRQ_HANDLED; - } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + goto disable_tx_irq; count = port->fifosize >> 1; do { @@ -171,8 +170,11 @@ static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) - clps711xuart_stop_tx(port); + if (uart_circ_empty(xmit)) { + disable_tx_irq: + disable_irq_nosync(TX_IRQ(port)); + tx_enabled(port) = 0; + } return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From af6d17cdc8c89aeb3101f0d27cd32fc0592b40b2 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 12 Apr 2012 10:47:50 +0900 Subject: pch_uart: Fix dma channel unallocated issue This driver anticipates pch_uart_verify_port() is not called during installation. However, actually pch_uart_verify_port() is called during installation. As a result, memory access violation occurs like below. 0. initial value: use_dma=0 1. starup() - dma channel is not allocated because use_dma=0 2. pch_uart_verify_port() - Set use_dma=1 3. UART processing acts DMA mode because use_dma=1 - memory access violation occurs! This patch fixes the issue. Solution: Whenever pch_uart_verify_port() is called and then dma channel is not allocated, the channel should be allocated. Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index bbbec4a74cf..c2816f49480 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1447,9 +1447,11 @@ static int pch_uart_verify_port(struct uart_port *port, __func__); return -EOPNOTSUPP; #endif - priv->use_dma = 1; priv->use_dma_flag = 1; dev_info(priv->port.dev, "PCH UART : Use DMA Mode\n"); + if (!priv->use_dma) + pch_request_dma(port); + priv->use_dma = 1; } return 0; -- cgit v1.2.3-70-g09d2 From b10c6d4b50cbbdccce2187c1ccc516a9c7335835 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Apr 2012 09:33:32 +0100 Subject: drm/usb: fix module license on drm/usb layer. Allows this module to load correctly with certain debugging options on. Reported on irc by scientes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_usb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_usb.c b/drivers/gpu/drm/drm_usb.c index c8c83dad2ce..37c9a523dd1 100644 --- a/drivers/gpu/drm/drm_usb.c +++ b/drivers/gpu/drm/drm_usb.c @@ -1,6 +1,6 @@ #include "drmP.h" #include -#include +#include int drm_get_usb_dev(struct usb_interface *interface, const struct usb_device_id *id, @@ -114,3 +114,7 @@ void drm_usb_exit(struct drm_driver *driver, usb_deregister(udriver); } EXPORT_SYMBOL(drm_usb_exit); + +MODULE_AUTHOR("David Airlie"); +MODULE_DESCRIPTION("USB DRM support"); +MODULE_LICENSE("GPL and additional rights"); -- cgit v1.2.3-70-g09d2 From cd90491bcd63af3f1505de76aa82d5884f1d16e7 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 8 Apr 2012 16:31:24 -0300 Subject: [media] V4L: mt9m032: fix two dead-locks Fix a copy-paste typo and a nested locking function call in mt9m032. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9m032.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c index 7636672c354..645973c5feb 100644 --- a/drivers/media/video/mt9m032.c +++ b/drivers/media/video/mt9m032.c @@ -392,10 +392,11 @@ static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, } /* Scaling is not supported, the format is thus fixed. */ - ret = mt9m032_get_pad_format(subdev, fh, fmt); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + ret = 0; done: - mutex_lock(&sensor->lock); + mutex_unlock(&sensor->lock); return ret; } -- cgit v1.2.3-70-g09d2 From 2198edddd8f0245d4c47419310c6cfb0f4e1a197 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 18 Apr 2012 10:05:17 -0400 Subject: HID: default HID_BATTERY_STRENGTH to no Commit 4f5ca836b "HID: hid-input: add support for HID devices reporting Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report the battery strength of HID devices. The commit log explicitly mentions it not working properly with recent userspace, but it is default y anyway. This is rather odd, and actually causes problems on real systems. This works around Fedora bug https://bugzilla.redhat.com/show_bug.cgi?id=806295 Signed-off-by: Josh Boyer Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index a3d03325299..ffddcba32af 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -34,7 +34,7 @@ config HID config HID_BATTERY_STRENGTH bool depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY - default y + default n config HIDRAW bool "/dev/hidraw raw HID device support" -- cgit v1.2.3-70-g09d2 From e36325071832f1ba96ac54fb8ba1459f08b05dd8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 18 Apr 2012 15:21:07 +0200 Subject: drm/radeon/kms: fix the regression of DVI connector check The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms: fix analog load detection on DVI-I connectors] is obviously wrong, and it's the culprit of the regression on my workstation with DVI-analog connection resulting in the blank output. Fixed the typo now. Signed-off-by: Takashi Iwai Reviewed-by: Alex Deucher Cc: Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index bd05156edbd..aa8268dd3cd 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -970,7 +970,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) encoder = obj_to_encoder(obj); - if (encoder->encoder_type != DRM_MODE_ENCODER_DAC || + if (encoder->encoder_type != DRM_MODE_ENCODER_DAC && encoder->encoder_type != DRM_MODE_ENCODER_TVDAC) continue; -- cgit v1.2.3-70-g09d2 From aef6a7eeac6fd867eda415f65a7f0247fb82baf4 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 18 Apr 2012 13:47:02 +0900 Subject: drm: fix page_flip error handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Free event and restore event_space only when page_flip->flags has DRM_MODE_PAGE_FLIP_EVENT if page_flip() is failed. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Reviewed-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index d3aaeb6ae23..c79870a75c2 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -3335,10 +3335,12 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev, ret = crtc->funcs->page_flip(crtc, fb, e); if (ret) { - spin_lock_irqsave(&dev->event_lock, flags); - file_priv->event_space += sizeof e->event; - spin_unlock_irqrestore(&dev->event_lock, flags); - kfree(e); + if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) { + spin_lock_irqsave(&dev->event_lock, flags); + file_priv->event_space += sizeof e->event; + spin_unlock_irqrestore(&dev->event_lock, flags); + kfree(e); + } } out: -- cgit v1.2.3-70-g09d2 From dfc6ae5bd70d3a22a0e977943c31f6d55fc32820 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 17 Apr 2012 16:51:38 -0400 Subject: radeon: fix r600/agp when vram is after AGP (v3) If AGP is placed in the middle, the size_af is off-by-one, it results in VRAM being placed at 0x7fffffff instead of 0x8000000. v2: fix the vram_start setup. v3: also fix r7xx & newer ASIC Reported-by: russiane39 on #radeon Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 4 ++-- drivers/gpu/drm/radeon/rv770.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index de71243b591..c8187c4b6ae 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1135,7 +1135,7 @@ static void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc } if (rdev->flags & RADEON_IS_AGP) { size_bf = mc->gtt_start; - size_af = 0xFFFFFFFF - mc->gtt_end + 1; + size_af = 0xFFFFFFFF - mc->gtt_end; if (size_bf > size_af) { if (mc->mc_vram_size > size_bf) { dev_warn(rdev->dev, "limiting VRAM\n"); @@ -1149,7 +1149,7 @@ static void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc mc->real_vram_size = size_af; mc->mc_vram_size = size_af; } - mc->vram_start = mc->gtt_end; + mc->vram_start = mc->gtt_end + 1; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index c62ae4be384..cdab1aeaed6 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -969,7 +969,7 @@ void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) } if (rdev->flags & RADEON_IS_AGP) { size_bf = mc->gtt_start; - size_af = 0xFFFFFFFF - mc->gtt_end + 1; + size_af = 0xFFFFFFFF - mc->gtt_end; if (size_bf > size_af) { if (mc->mc_vram_size > size_bf) { dev_warn(rdev->dev, "limiting VRAM\n"); @@ -983,7 +983,7 @@ void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->real_vram_size = size_af; mc->mc_vram_size = size_af; } - mc->vram_start = mc->gtt_end; + mc->vram_start = mc->gtt_end + 1; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", -- cgit v1.2.3-70-g09d2 From 5edaad87000a143504a8f8e2864bb415a9287d94 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Wed, 18 Apr 2012 01:30:02 -0300 Subject: drivers: gpu: drm: gma500: mdfld_dsi_output.h: Remove not unneeded include of version.h The output of "make versioncheck" points a incorrect include of version.h in the drivers/gpu/drm/gma500/mdfld_dsi_output.h: drivers/gpu/drm/gma500/mdfld_dsi_output.h: 32 linux/version.h not needed. If we take a look in the file, we can agree to remove it. Cc: David Airlie Cc: Signed-off-by: Marcos Paulo de Souza Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/mdfld_dsi_output.h | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.h b/drivers/gpu/drm/gma500/mdfld_dsi_output.h index 21071cef92a..36eb0744841 100644 --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.h +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.h @@ -29,7 +29,6 @@ #define __MDFLD_DSI_OUTPUT_H__ #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From 5799d9e2eab20ef694fb92a7636f451e1b0e456c Mon Sep 17 00:00:00 2001 From: Jim Meyering Date: Tue, 17 Apr 2012 21:27:54 +0200 Subject: drm/nouveau/pm: don't read/write beyond end of stack buffer NUL-terminate after strncpy. If the parameter "profile" has length 16 or more, then strncpy leaves "string" with no NUL terminator, so the following search for '\n' may read beyond the end of that 16-byte buffer. If it finds a newline there, then it will also write beyond the end of that stack buffer. Signed-off-by: Jim Meyering Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index 34d591b7d4e..da3e7c3abab 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -235,6 +235,7 @@ nouveau_pm_profile_set(struct drm_device *dev, const char *profile) return -EPERM; strncpy(string, profile, sizeof(string)); + string[sizeof(string) - 1] = 0; if ((ptr = strchr(string, '\n'))) *ptr = '\0'; -- cgit v1.2.3-70-g09d2 From 4e47e02d1ac47b6eb591b2a632a6c059ce3e5002 Mon Sep 17 00:00:00 2001 From: Prathyush Date: Sat, 14 Apr 2012 17:22:13 +0530 Subject: drm: Releasing FBs before releasing GEM objects during drm_release During DRM release, all the FBs and gem objects are released. If a gem object is being used as a FB and set to a crtc, it must not be freed before releasing the framebuffer first. If FBs are released first, the crtc using the FB is disabled first so now the GEM object can be freed safely. The CRTC will be enabled again when the driver restores fbdev mode. Signed-off-by: Prathyush K Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fops.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index cdfbf27b2b3..123de28f94e 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -507,12 +507,12 @@ int drm_release(struct inode *inode, struct file *filp) drm_events_release(file_priv); - if (dev->driver->driver_features & DRIVER_GEM) - drm_gem_release(dev, file_priv); - if (dev->driver->driver_features & DRIVER_MODESET) drm_fb_release(file_priv); + if (dev->driver->driver_features & DRIVER_GEM) + drm_gem_release(dev, file_priv); + mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; -- cgit v1.2.3-70-g09d2 From a09d431f344d854e4fe9cfac44f78cb8202f3eb7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Apr 2012 15:42:58 +0100 Subject: drm/radeon: fix load detect on rn50 with hardcoded EDIDs. When the force changes went in back in 3.3.0, we ended up returning disconnected in the !force case, and the connected in when forced, as it hit the hardcoded check. Fix it so all exits go via the hardcoded check and stop spurious modesets on platforms with hardcoded EDIDs. Reported-by: Evan McNabb (Red Hat) Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index aa8268dd3cd..3c2e7a000a2 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1000,6 +1000,7 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) * cases the DVI port is actually a virtual KVM port connected to the service * processor. */ +out: if ((!rdev->is_atom_bios) && (ret == connector_status_disconnected) && rdev->mode_info.bios_hardcoded_edid_size) { @@ -1007,7 +1008,6 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) ret = connector_status_connected; } -out: /* updated in get modes as well since we need to know if it's analog or digital */ radeon_connector_update_scratch_regs(connector, ret); return ret; -- cgit v1.2.3-70-g09d2 From 273a50fbcd2d2c0652bbda58dd1985f932ce6d75 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Fri, 13 Apr 2012 00:37:00 +0200 Subject: nouveau: Set special lane map for the right chipset The refactoring of the nv50 logic, introduced in 8663bc7c, modified the test for the special lane map used on some Apple computers with Nvidia chipsets. The tested MBA3,1 would still boot, but resume from suspend stopped working. This patch restores the old test, which fixes the problem. Signed-off-by: Henrik Rydberg Acked-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nv50_sor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c index a7844ab6a50..27464021247 100644 --- a/drivers/gpu/drm/nouveau/nv50_sor.c +++ b/drivers/gpu/drm/nouveau/nv50_sor.c @@ -42,7 +42,7 @@ nv50_sor_dp_lane_map(struct drm_device *dev, struct dcb_entry *dcb, u8 lane) struct drm_nouveau_private *dev_priv = dev->dev_private; static const u8 nvaf[] = { 24, 16, 8, 0 }; /* thanks, apple.. */ static const u8 nv50[] = { 16, 8, 0, 24 }; - if (dev_priv->card_type == 0xaf) + if (dev_priv->chipset == 0xaf) return nvaf[lane]; return nv50[lane]; } -- cgit v1.2.3-70-g09d2 From 3066616ce23aad5719c23a0f21f32676402cb44b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 17 Apr 2012 22:21:38 -0400 Subject: xen/xenbus: Add quirk to deal with misconfigured backends. A rather annoying and common case is when booting a PVonHVM guest and exposing the PV KBD and PV VFB - as broken toolstacks don't always initialize the backends correctly. Normally The HVM guest is using the VGA driver and the emulated keyboard for this (though upstream version of QEMU implements PV KBD, but still uses a VGA driver). We provide a very basic two-stage wait mechanism - where we wait for 30 seconds for all devices, and then for 270 for all them except the two mentioned. That allows us to wait for the essential devices, like network or disk for the full 6 minutes. To trigger this, put this in your guest config: vfb = [ 'vnc=1, vnclisten=0.0.0.0 ,vncunused=1'] instead of this: vnc=1 vnclisten="0.0.0.0" CC: stable@kernel.org Acked-by: Stefano Stabellini [v3: Split delay in non-essential (30 seconds) and essential devices per Ian and Stefano suggestion] [v4: Added comments per Stefano suggestion] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_probe_frontend.c | 69 +++++++++++++++++++++++------- 1 file changed, 53 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index f20c5f178b4..a31b54d4883 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -135,7 +135,7 @@ static int read_backend_details(struct xenbus_device *xendev) return xenbus_read_otherend_details(xendev, "backend-id", "backend"); } -static int is_device_connecting(struct device *dev, void *data) +static int is_device_connecting(struct device *dev, void *data, bool ignore_nonessential) { struct xenbus_device *xendev = to_xenbus_device(dev); struct device_driver *drv = data; @@ -152,16 +152,41 @@ static int is_device_connecting(struct device *dev, void *data) if (drv && (dev->driver != drv)) return 0; + if (ignore_nonessential) { + /* With older QEMU, for PVonHVM guests the guest config files + * could contain: vfb = [ 'vnc=1, vnclisten=0.0.0.0'] + * which is nonsensical as there is no PV FB (there can be + * a PVKB) running as HVM guest. */ + + if ((strncmp(xendev->nodename, "device/vkbd", 11) == 0)) + return 0; + + if ((strncmp(xendev->nodename, "device/vfb", 10) == 0)) + return 0; + } xendrv = to_xenbus_driver(dev->driver); return (xendev->state < XenbusStateConnected || (xendev->state == XenbusStateConnected && xendrv->is_ready && !xendrv->is_ready(xendev))); } +static int essential_device_connecting(struct device *dev, void *data) +{ + return is_device_connecting(dev, data, true /* ignore PV[KBB+FB] */); +} +static int non_essential_device_connecting(struct device *dev, void *data) +{ + return is_device_connecting(dev, data, false); +} -static int exists_connecting_device(struct device_driver *drv) +static int exists_essential_connecting_device(struct device_driver *drv) { return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, - is_device_connecting); + essential_device_connecting); +} +static int exists_non_essential_connecting_device(struct device_driver *drv) +{ + return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv, + non_essential_device_connecting); } static int print_device_status(struct device *dev, void *data) @@ -192,6 +217,23 @@ static int print_device_status(struct device *dev, void *data) /* We only wait for device setup after most initcalls have run. */ static int ready_to_wait_for_devices; +static bool wait_loop(unsigned long start, unsigned int max_delay, + unsigned int *seconds_waited) +{ + if (time_after(jiffies, start + (*seconds_waited+5)*HZ)) { + if (!*seconds_waited) + printk(KERN_WARNING "XENBUS: Waiting for " + "devices to initialise: "); + *seconds_waited += 5; + printk("%us...", max_delay - *seconds_waited); + if (*seconds_waited == max_delay) + return true; + } + + schedule_timeout_interruptible(HZ/10); + + return false; +} /* * On a 5-minute timeout, wait for all devices currently configured. We need * to do this to guarantee that the filesystems and / or network devices @@ -215,19 +257,14 @@ static void wait_for_devices(struct xenbus_driver *xendrv) if (!ready_to_wait_for_devices || !xen_domain()) return; - while (exists_connecting_device(drv)) { - if (time_after(jiffies, start + (seconds_waited+5)*HZ)) { - if (!seconds_waited) - printk(KERN_WARNING "XENBUS: Waiting for " - "devices to initialise: "); - seconds_waited += 5; - printk("%us...", 300 - seconds_waited); - if (seconds_waited == 300) - break; - } - - schedule_timeout_interruptible(HZ/10); - } + while (exists_non_essential_connecting_device(drv)) + if (wait_loop(start, 30, &seconds_waited)) + break; + + /* Skips PVKB and PVFB check.*/ + while (exists_essential_connecting_device(drv)) + if (wait_loop(start, 270, &seconds_waited)) + break; if (seconds_waited) printk("\n"); -- cgit v1.2.3-70-g09d2 From 18311c5395ca4d0c3fefa406da87a9d16efaca46 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 18 Apr 2012 03:59:01 -0300 Subject: [media] V4L: mt9m032: fix compilation breakage Fix the following compilation failure: linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_crop': linux-2.6/drivers/media/video/mt9m032.c:337: error: implicit declaration of function 'v4l2_subdev_get_try_crop' linux-2.6/drivers/media/video/mt9m032.c:337: warning: return makes pointer from integer without a cast linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_format': linux-2.6/drivers/media/video/mt9m032.c:359: error: implicit declaration of function 'v4l2_subdev_get_try_format' linux-2.6/drivers/media/video/mt9m032.c:359: warning: return makes pointer from integer without a cast linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_probe': linux-2.6/drivers/media/video/mt9m032.c:767: error: 'struct v4l2_subdev' has no member named 'entity' linux-2.6/drivers/media/video/mt9m032.c:826: error: 'struct v4l2_subdev' has no member named 'entity' linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_remove': linux-2.6/drivers/media/video/mt9m032.c:842: error: 'struct v4l2_subdev' has no member named 'entity' make[4]: *** [drivers/media/video/mt9m032.o] Error 1 by adding a dependency on VIDEO_V4L2_SUBDEV_API. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f2479c5c0eb..ce1e7ba940f 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -492,7 +492,7 @@ config VIDEO_VS6624 config VIDEO_MT9M032 tristate "MT9M032 camera sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select VIDEO_APTINA_PLL ---help--- This driver supports MT9M032 camera sensors from Aptina, monochrome -- cgit v1.2.3-70-g09d2 From 186bab1ce04f99153b7eeb3348438b654c24c24b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 17 Apr 2012 14:35:49 -0400 Subject: xen/resume: Fix compile warnings. linux/drivers/xen/manage.c: In function 'do_suspend': linux/drivers/xen/manage.c:160:5: warning: 'si.cancelled' may be used uninitialized in this function Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/manage.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9e14ae6cd49..412b96cc530 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -132,6 +132,7 @@ static void do_suspend(void) err = dpm_suspend_end(PMSG_FREEZE); if (err) { printk(KERN_ERR "dpm_suspend_end failed: %d\n", err); + si.cancelled = 0; goto out_resume; } -- cgit v1.2.3-70-g09d2 From e631f578048e2afd8bfede2e9dc86aa4592def3a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 16 Apr 2012 14:59:32 -0300 Subject: [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware Rather than loading firmware specific for the xtal frequency, just use the standard firmware and set the xtal frequency after firmware upload. The modified firmware will never be released, so we're better off merging this now rather than waiting for v3.5. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/xc5000.c | 39 ++++++++++++++++++++++++++++++++---- drivers/media/common/tuners/xc5000.h | 1 + 2 files changed, 36 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 7f98984e4fa..eab2ea42420 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -54,6 +54,7 @@ struct xc5000_priv { struct list_head hybrid_tuner_instance_list; u32 if_khz; + u32 xtal_khz; u32 freq_hz; u32 bandwidth; u8 video_standard; @@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = { .size = 12401, }; -static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = { - .name = "dvb-fe-xc5000c-41.024.5-31875.fw", - .size = 16503, +static const struct xc5000_fw_cfg xc5000c_41_024_5 = { + .name = "dvb-fe-xc5000c-41.024.5.fw", + .size = 16497, }; static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) @@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) case XC5000A: return &xc5000a_1_6_114; case XC5000C: - return &xc5000c_41_024_5_31875; + return &xc5000c_41_024_5; } } @@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) return found; } +static int xc_set_xtal(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret = XC_RESULT_SUCCESS; + + switch (priv->chip_id) { + default: + case XC5000A: + /* 32.000 MHz xtal is default */ + break; + case XC5000C: + switch (priv->xtal_khz) { + default: + case 32000: + /* 32.000 MHz xtal is default */ + break; + case 31875: + /* 31.875 MHz xtal configuration */ + ret = xc_write_reg(priv, 0x000f, 0x8081); + break; + } + break; + } + return ret; +} static int xc5000_fwupload(struct dvb_frontend *fe) { @@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe) } else { printk(KERN_INFO "xc5000: firmware uploading...\n"); ret = xc_load_i2c_sequence(fe, fw->data); + if (XC_RESULT_SUCCESS == ret) + ret = xc_set_xtal(fe); printk(KERN_INFO "xc5000: firmware upload complete...\n"); } @@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, priv->if_khz = cfg->if_khz; } + if (priv->xtal_khz == 0) + priv->xtal_khz = cfg->xtal_khz; + if (priv->radio_input == 0) priv->radio_input = cfg->radio_input; diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index 3396f8e02b4..39a73bf0140 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -34,6 +34,7 @@ struct xc5000_config { u8 i2c_address; u32 if_khz; u8 radio_input; + u32 xtal_khz; int chip_id; }; -- cgit v1.2.3-70-g09d2 From d3a7b83f865b46bb7b5e1ed18a129ce1af349db4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 19 Apr 2012 18:12:40 +0200 Subject: drivers/tty/amiserial.c: add missing tty_unlock tty_unlock is used on all other exits from the function. Signed-off-by: Julia Lawall Acked-by: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/amiserial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 24145c30c9b..6cc4358f68c 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1073,8 +1073,10 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, (new_serial.close_delay != port->close_delay) || (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ((new_serial.flags & ~ASYNC_USR_MASK) != - (port->flags & ~ASYNC_USR_MASK))) + (port->flags & ~ASYNC_USR_MASK))) { + tty_unlock(); return -EPERM; + } port->flags = ((port->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); state->custom_divisor = new_serial.custom_divisor; -- cgit v1.2.3-70-g09d2 From 2d5733fcd33dd451022d197cb6b476e970519ca7 Mon Sep 17 00:00:00 2001 From: Yuri Matylitski Date: Fri, 20 Apr 2012 12:38:32 +0300 Subject: USB: serial: cp210x: Fixed usb_control_msg timeout values Fixed too small hardcoded timeout values for usb_control_msg in driver for SiliconLabs cp210x-based usb-to-serial adapters. Replaced with USB_CTRL_GET_TIMEOUT/USB_CTRL_SET_TIMEOUT. Signed-off-by: Yuri Matylitski Acked-by: Kirill A. Shutemov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 0310e2df59f..ec30f95ef39 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -287,7 +287,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, - port_priv->bInterfaceNumber, buf, size, 300); + port_priv->bInterfaceNumber, buf, size, + USB_CTRL_GET_TIMEOUT); /* Convert data into an array of integers */ for (i = 0; i < length; i++) @@ -340,12 +341,14 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_DEVICE, 0x0000, - port_priv->bInterfaceNumber, buf, size, 300); + port_priv->bInterfaceNumber, buf, size, + USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_DEVICE, data[0], - port_priv->bInterfaceNumber, NULL, 0, 300); + port_priv->bInterfaceNumber, NULL, 0, + USB_CTRL_SET_TIMEOUT); } kfree(buf); -- cgit v1.2.3-70-g09d2 From 19244ad06b70ed84931df868583547ce1cd3a186 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 11:19:35 -0700 Subject: Revert "ACPI: ignore FADT reset-reg-sup flag" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit cf450136bfde77c7f95065c91bffded4aa7fa731. It breaks reboot on at least one Thinkpad T43, as reported by Jörg Otte: "On reboot it shuts down as normal. The last lines displayed are: >Unmounting temporary filesystems.. [OK] >Deactivating swap... [OK] >Unmounting local filesystems... [OK] >Will now restart > Restarting system Then I hear it accessing the cd-drive, but then it's being stuck." Jörg bisected the regression to this commit. That commit fixes another machine (see https://bugzilla.kernel.org/show_bug.cgi?id=11533 for details) that has a BIOS bug and doesn't support ACPI reset. However, at least one of those other reporters no longer even has the machine in question, and had a different workaround to begin with. Besides, it clearly was a buggy BIOS. Let's not break the correct case to fix that case. Reported-and-bisected-by: Jörg Otte Cc: linux-acpi@vger.kernel.org Cc: Len Brown Cc: Peter Anvin Signed-off-by: Linus Torvalds --- drivers/acpi/acpica/hwxface.c | 3 ++- drivers/acpi/reboot.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index ab513a972c9..a716fede4f2 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -74,7 +74,8 @@ acpi_status acpi_reset(void) /* Check if the reset register is supported */ - if (!reset_reg->address) { + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + !reset_reg->address) { return_ACPI_STATUS(AE_NOT_EXIST); } diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index c1d61243593..a6c77e8b37b 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -23,7 +23,8 @@ void acpi_reboot(void) /* Is the reset register supported? The spec says we should be * checking the bit width and bit offset, but Windows ignores * these fields */ - /* Ignore also acpi_gbl_FADT.flags.ACPI_FADT_RESET_REGISTER */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER)) + return; reset_value = acpi_gbl_FADT.reset_value; -- cgit v1.2.3-70-g09d2 From 7194efb8f063ee3aa0cb50d9002348887e68ec10 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 5 Apr 2012 14:45:47 +0300 Subject: mmc: fixes for eMMC v4.5 discard operation eMMC v4.5 discard operation is significantly different from the existing trim operation because it is not guaranteed to work with the new sanitize operation. Consequently mmc_can_trim() is separated from mmc_can_discard(). Also the new discard operation does not result in the sectors being set to all-zeros, so discard_zeroes_data must not be set. In addition, the new discard has the same timeout as trim, but from v4.5 trim is defined to use the hc timeout. The timeout calculation is adjusted accordingly. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Cc: Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/card/queue.c | 2 +- drivers/mmc/core/core.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 2517547b436..996f8e36e23 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -139,7 +139,7 @@ static void mmc_queue_setup_discard(struct request_queue *q, queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); q->limits.max_discard_sectors = max_discard; - if (card->erased_byte == 0) + if (card->erased_byte == 0 && !mmc_can_discard(card)) q->limits.discard_zeroes_data = 1; q->limits.discard_granularity = card->pref_erase << 9; /* granularity must not be greater than max. discard */ diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7474c47b9c0..83db5ef96bb 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1409,7 +1409,10 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, { unsigned int erase_timeout; - if (card->ext_csd.erase_group_def & 1) { + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { /* High Capacity Erase Group Size uses HC timeouts */ if (arg == MMC_TRIM_ARG) erase_timeout = card->ext_csd.trim_timeout; @@ -1681,8 +1684,6 @@ int mmc_can_trim(struct mmc_card *card) { if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) return 1; - if (mmc_can_discard(card)) - return 1; return 0; } EXPORT_SYMBOL(mmc_can_trim); -- cgit v1.2.3-70-g09d2 From 283028122db37621b124f079ca8eae5b64807ad4 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 5 Apr 2012 14:45:48 +0300 Subject: mmc: fixes for eMMC v4.5 sanitize operation eMMC v4.5 sanitize operation erases all copies of unmapped data. However trim or erase operations must be used first to unmap the required sectors. That was not being done. Fixes apply to linux 3.2 on. Signed-off-by: Adrian Hunter Cc: Acked-by: Jaehoon Chung Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 54 ++++++++++++++++++++++++++++++++++-------------- drivers/mmc/core/core.c | 2 ++ 2 files changed, 40 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index b1809650b7a..4232bc4d992 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -873,7 +873,7 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, { struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; - unsigned int from, nr, arg; + unsigned int from, nr, arg, trim_arg, erase_arg; int err = 0, type = MMC_BLK_SECDISCARD; if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) { @@ -881,20 +881,26 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, goto out; } + from = blk_rq_pos(req); + nr = blk_rq_sectors(req); + /* The sanitize operation is supported at v4.5 only */ if (mmc_can_sanitize(card)) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_SANITIZE_START, 1, 0); - goto out; + erase_arg = MMC_ERASE_ARG; + trim_arg = MMC_TRIM_ARG; + } else { + erase_arg = MMC_SECURE_ERASE_ARG; + trim_arg = MMC_SECURE_TRIM1_ARG; } - from = blk_rq_pos(req); - nr = blk_rq_sectors(req); - - if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) - arg = MMC_SECURE_TRIM1_ARG; - else - arg = MMC_SECURE_ERASE_ARG; + if (mmc_erase_group_aligned(card, from, nr)) + arg = erase_arg; + else if (mmc_can_trim(card)) + arg = trim_arg; + else { + err = -EINVAL; + goto out; + } retry: if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -904,25 +910,41 @@ retry: INAND_CMD38_ARG_SECERASE, 0); if (err) - goto out; + goto out_retry; } + err = mmc_erase(card, from, nr, arg); - if (!err && arg == MMC_SECURE_TRIM1_ARG) { + if (err == -EIO) + goto out_retry; + if (err) + goto out; + + if (arg == MMC_SECURE_TRIM1_ARG) { if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, 0); if (err) - goto out; + goto out_retry; } + err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); + if (err == -EIO) + goto out_retry; + if (err) + goto out; } -out: - if (err == -EIO && !mmc_blk_reset(md, card->host, type)) + + if (mmc_can_sanitize(card)) + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_SANITIZE_START, 1, 0); +out_retry: + if (err && !mmc_blk_reset(md, card->host, type)) goto retry; if (!err) mmc_blk_reset_success(md, type); +out: spin_lock_irq(&md->lock); __blk_end_request(req, err, blk_rq_bytes(req)); spin_unlock_irq(&md->lock); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 83db5ef96bb..e541efbf325 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1702,6 +1702,8 @@ EXPORT_SYMBOL(mmc_can_discard); int mmc_can_sanitize(struct mmc_card *card) { + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) return 1; return 0; -- cgit v1.2.3-70-g09d2 From b6d085f6f59108508c1eea9c5251deb765350c50 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Tue, 10 Apr 2012 09:57:36 -0400 Subject: mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m Commit 46856a68dc ("mmc: omap_hsmmc: Convert hsmmc driver to use device tree") introduced in 3.4-rc1 has a missing semi-colon, causing: drivers/mmc/host/omap_hsmmc.c:1745: error: expected ',' or ';' before 'extern' Reported-by: Russell King Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 5c2b1c10af9..cfd049c7349 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1741,7 +1741,7 @@ static const struct of_device_id omap_mmc_of_match[] = { .data = &omap4_reg_offset, }, {}, -} +}; MODULE_DEVICE_TABLE(of, omap_mmc_of_match); static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev) -- cgit v1.2.3-70-g09d2 From 4d048f915f32c8455605b106aa0de2cf68a71903 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 11 Apr 2012 15:33:13 +0530 Subject: mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage of_have_populated_dt() is not expected to be used in drivers but instead only in early platform init code. Drivers on the other hand should rely on dev->of_node or of_match_device(). Besides usage of of_have_populated_dt() also throws up build error as below which was reported by Balaji TK, when omap_hsmmc is built as a module. ERROR: "allnodes" [drivers/mmc/host/omap_hsmmc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 So get rid of all of_have_populated_dt() usage in omap_hsmmc driver and instead use dev->of_node to make the same dicisions as earlier. Signed-off-by: Rajendra Nayak Reported-by: Benoit Cousson Cc: Sebastian Andrzej Siewior Acked-by: Rob Herring Reviewed-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index cfd049c7349..56d4499d438 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -249,7 +249,7 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, * the pbias cell programming support is still missing when * booting with Device tree */ - if (of_have_populated_dt() && !vdd) + if (dev->of_node && !vdd) return 0; if (mmc_slot(host).before_set_reg) @@ -1549,7 +1549,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * can't be allowed when booting with device * tree. */ - (!of_have_populated_dt())) { + !host->dev->of_node) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to -- cgit v1.2.3-70-g09d2 From a46ef99d80817a167477ed1c8b4d90ee0c2e726f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 16:20:01 -0700 Subject: VM: add "vm_munmap()" helper function Like the vm_brk() function, this is the same as "do_munmap()", except it does the VM locking for the caller. Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 11 +++-------- arch/sparc/kernel/sys_sparc_64.c | 7 +------ arch/x86/kvm/x86.c | 4 +--- drivers/gpu/drm/i810/i810_dma.c | 4 +--- fs/aio.c | 7 ++----- include/linux/mm.h | 1 + mm/mmap.c | 15 +++++++++------ mm/nommu.c | 9 +++++++-- 8 files changed, 25 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 9d0fd7d5bb8..2777310b698 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -605,9 +605,9 @@ pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f) } static inline unsigned int -pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct) +pfm_vm_munmap(struct mm_struct *mm, unsigned long addr, size_t len) { - return do_munmap(mm, addr, len); + return vm_munmap(mm, addr, len); } static inline unsigned long @@ -1473,13 +1473,8 @@ pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long siz /* * does the actual unmapping */ - down_write(&task->mm->mmap_sem); - - DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size)); + r = pfm_vm_munmap(task->mm, (unsigned long)vaddr, size); - r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0); - - up_write(&task->mm->mmap_sem); if (r !=0) { printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size); } diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 232df994953..022e57aadf5 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -566,15 +566,10 @@ out: SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) { - long ret; - if (invalid_64bit_range(addr, len)) return -EINVAL; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, addr, len); - up_write(¤t->mm->mmap_sem); - return ret; + return vm_munmap(current->mm, addr, len); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 4044ce0bf7c..8beb9ce7936 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6366,10 +6366,8 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, if (!user_alloc && !old.user_alloc && old.rmap && !npages) { int ret; - down_write(¤t->mm->mmap_sem); - ret = do_munmap(current->mm, old.userspace_addr, + ret = vm_munmap(current->mm, old.userspace_addr, old.npages * PAGE_SIZE); - up_write(¤t->mm->mmap_sem); if (ret < 0) printk(KERN_WARNING "kvm_vm_ioctl_set_memory_region: " diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 2c8a60c3b98..b85337f06fb 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -157,11 +157,9 @@ static int i810_unmap_buffer(struct drm_buf *buf) if (buf_priv->currently_mapped != I810_BUF_MAPPED) return -EINVAL; - down_write(¤t->mm->mmap_sem); - retcode = do_munmap(current->mm, + retcode = vm_munmap(current->mm, (unsigned long)buf_priv->virtual, (size_t) buf->total); - up_write(¤t->mm->mmap_sem); buf_priv->currently_mapped = I810_BUF_UNMAPPED; buf_priv->virtual = NULL; diff --git a/fs/aio.c b/fs/aio.c index da887604dfc..99bd790e8cd 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -92,11 +92,8 @@ static void aio_free_ring(struct kioctx *ctx) for (i=0; inr_pages; i++) put_page(info->ring_pages[i]); - if (info->mmap_size) { - down_write(&ctx->mm->mmap_sem); - do_munmap(ctx->mm, info->mmap_base, info->mmap_size); - up_write(&ctx->mm->mmap_sem); - } + if (info->mmap_size) + vm_munmap(ctx->mm, info->mmap_base, info->mmap_size); if (info->ring_pages && info->ring_pages != info->internal_pages) kfree(info->ring_pages); diff --git a/include/linux/mm.h b/include/linux/mm.h index bfee4ad6680..cb61950a3aa 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1417,6 +1417,7 @@ extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); +extern int vm_munmap(struct mm_struct *, unsigned long, size_t); /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); diff --git a/mm/mmap.c b/mm/mmap.c index df51891c864..4af45f519f1 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2107,21 +2107,24 @@ int do_munmap(struct mm_struct *mm, unsigned long start, size_t len) return 0; } - EXPORT_SYMBOL(do_munmap); -SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) +int vm_munmap(struct mm_struct *mm, unsigned long start, size_t len) { int ret; - struct mm_struct *mm = current->mm; - - profile_munmap(addr); down_write(&mm->mmap_sem); - ret = do_munmap(mm, addr, len); + ret = do_munmap(mm, start, len); up_write(&mm->mmap_sem); return ret; } +EXPORT_SYMBOL(vm_munmap); + +SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) +{ + profile_munmap(addr); + return vm_munmap(current->mm, addr, len); +} static inline void verify_mm_writelocked(struct mm_struct *mm) { diff --git a/mm/nommu.c b/mm/nommu.c index 634193324a6..11a69b22bd4 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1709,16 +1709,21 @@ erase_whole_vma: } EXPORT_SYMBOL(do_munmap); -SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) +int vm_munmap(struct mm_struct *mm, unsigned long addr, size_t len) { int ret; - struct mm_struct *mm = current->mm; down_write(&mm->mmap_sem); ret = do_munmap(mm, addr, len); up_write(&mm->mmap_sem); return ret; } +EXPORT_SYMBOL(vm_munmap); + +SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) +{ + return vm_munmap(current->mm, addr, len); +} /* * release all the mappings made in a process's VM space -- cgit v1.2.3-70-g09d2 From 6be5ceb02e98eaf6cfc4f8b12a896d04023f340d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Apr 2012 17:13:58 -0700 Subject: VM: add "vm_mmap()" helper function This continues the theme started with vm_brk() and vm_munmap(): vm_mmap() does the same thing as do_mmap(), but additionally does the required VM locking. This uninlines (and rewrites it to be clearer) do_mmap(), which sadly duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have to export our internal do_mmap_pgoff() function. Some day we hopefully don't have to export do_mmap() either, if all modular users can become the simpler vm_mmap() instead. We're actually very close to that already, with the notable exception of the (broken) use in i810, and a couple of stragglers in binfmt_elf. Signed-off-by: Linus Torvalds --- arch/tile/kernel/single_step.c | 4 +--- arch/x86/ia32/ia32_aout.c | 12 +++--------- arch/x86/kvm/x86.c | 4 +--- drivers/gpu/drm/drm_bufs.c | 12 ++++-------- drivers/gpu/drm/exynos/exynos_drm_gem.c | 4 +--- drivers/gpu/drm/i810/i810_dma.c | 1 + drivers/gpu/drm/i915/i915_gem.c | 4 +--- fs/binfmt_aout.c | 12 +++--------- fs/binfmt_elf.c | 8 ++------ fs/binfmt_elf_fdpic.c | 18 ++++-------------- fs/binfmt_flat.c | 12 +++--------- fs/binfmt_som.c | 12 +++--------- include/linux/mm.h | 23 ++++++----------------- mm/mmap.c | 29 +++++++++++++++++++++++++++-- mm/nommu.c | 29 +++++++++++++++++++++++++++-- 15 files changed, 87 insertions(+), 97 deletions(-) (limited to 'drivers') diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 9efbc1391b3..89529c9f060 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -346,12 +346,10 @@ void single_step_once(struct pt_regs *regs) } /* allocate a cache line of writable, executable memory */ - down_write(¤t->mm->mmap_sem); - buffer = (void __user *) do_mmap(NULL, 0, 64, + buffer = (void __user *) vm_mmap(NULL, 0, 64, PROT_EXEC | PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void __force *)buffer)) { kfree(state); diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index b6817ee9033..4824fb45560 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -379,26 +379,22 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs) goto beyond_if; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, + error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, PROT_READ | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset); - up_write(¤t->mm->mmap_sem); if (error != N_TXTADDR(ex)) { send_sig(SIGKILL, current, 0); return error; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data, + error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE | MAP_32BIT, fd_offset + ex.a_text); - up_write(¤t->mm->mmap_sem); if (error != N_DATADDR(ex)) { send_sig(SIGKILL, current, 0); return error; @@ -482,12 +478,10 @@ static int load_aout_library(struct file *file) goto out; } /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, start_addr, ex.a_text + ex.a_data, + error = vm_mmap(file, start_addr, ex.a_text + ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_32BIT, N_TXTOFF(ex)); - up_write(¤t->mm->mmap_sem); retval = error; if (error != start_addr) goto out; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8beb9ce7936..1457be305fb 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6336,13 +6336,11 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, if (npages && !old.rmap) { unsigned long userspace_addr; - down_write(¤t->mm->mmap_sem); - userspace_addr = do_mmap(NULL, 0, + userspace_addr = vm_mmap(NULL, 0, npages * PAGE_SIZE, PROT_READ | PROT_WRITE, map_flags, 0); - up_write(¤t->mm->mmap_sem); if (IS_ERR((void *)userspace_addr)) return PTR_ERR((void *)userspace_addr); diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 30372f7b2d4..348b367debe 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -1510,8 +1510,8 @@ int drm_freebufs(struct drm_device *dev, void *data, * \param arg pointer to a drm_buf_map structure. * \return zero on success or a negative number on failure. * - * Maps the AGP, SG or PCI buffer region with do_mmap(), and copies information - * about each buffer into user space. For PCI buffers, it calls do_mmap() with + * Maps the AGP, SG or PCI buffer region with vm_mmap(), and copies information + * about each buffer into user space. For PCI buffers, it calls vm_mmap() with * offset equal to 0, which drm_mmap() interpretes as PCI buffers and calls * drm_mmap_dma(). */ @@ -1553,18 +1553,14 @@ int drm_mapbufs(struct drm_device *dev, void *data, retcode = -EINVAL; goto done; } - down_write(¤t->mm->mmap_sem); - virtual = do_mmap(file_priv->filp, 0, map->size, + virtual = vm_mmap(file_priv->filp, 0, map->size, PROT_READ | PROT_WRITE, MAP_SHARED, token); - up_write(¤t->mm->mmap_sem); } else { - down_write(¤t->mm->mmap_sem); - virtual = do_mmap(file_priv->filp, 0, dma->byte_count, + virtual = vm_mmap(file_priv->filp, 0, dma->byte_count, PROT_READ | PROT_WRITE, MAP_SHARED, 0); - up_write(¤t->mm->mmap_sem); } if (virtual > -1024UL) { /* Real error */ diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 26d51979116..392ce71ed6a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -581,10 +581,8 @@ int exynos_drm_gem_mmap_ioctl(struct drm_device *dev, void *data, obj->filp->f_op = &exynos_drm_gem_fops; obj->filp->private_data = obj; - down_write(¤t->mm->mmap_sem); - addr = do_mmap(obj->filp, 0, args->size, + addr = vm_mmap(obj->filp, 0, args->size, PROT_READ | PROT_WRITE, MAP_SHARED, 0); - up_write(¤t->mm->mmap_sem); drm_gem_object_unreference_unlocked(obj); diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index b85337f06fb..a4ba453b3d2 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -129,6 +129,7 @@ static int i810_map_buffer(struct drm_buf *buf, struct drm_file *file_priv) if (buf_priv->currently_mapped == I810_BUF_MAPPED) return -EINVAL; + /* This is all entirely broken */ down_write(¤t->mm->mmap_sem); old_fops = file_priv->filp->f_op; file_priv->filp->f_op = &i810_buffer_fops; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0e3c6acde95..0d1e4b7b4b9 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1087,11 +1087,9 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data, if (obj == NULL) return -ENOENT; - down_write(¤t->mm->mmap_sem); - addr = do_mmap(obj->filp, 0, args->size, + addr = vm_mmap(obj->filp, 0, args->size, PROT_READ | PROT_WRITE, MAP_SHARED, args->offset); - up_write(¤t->mm->mmap_sem); drm_gem_object_unreference_unlocked(obj); if (IS_ERR((void *)addr)) return addr; diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index 88527492b91..d146e181d10 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -319,24 +319,20 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) goto beyond_if; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, + error = vm_mmap(bprm->file, N_TXTADDR(ex), ex.a_text, PROT_READ | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE, fd_offset); - up_write(¤t->mm->mmap_sem); if (error != N_TXTADDR(ex)) { send_sig(SIGKILL, current, 0); return error; } - down_write(¤t->mm->mmap_sem); - error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data, + error = vm_mmap(bprm->file, N_DATADDR(ex), ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE, fd_offset + ex.a_text); - up_write(¤t->mm->mmap_sem); if (error != N_DATADDR(ex)) { send_sig(SIGKILL, current, 0); return error; @@ -417,12 +413,10 @@ static int load_aout_library(struct file *file) goto out; } /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, start_addr, ex.a_text + ex.a_data, + error = vm_mmap(file, start_addr, ex.a_text + ex.a_data, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE, N_TXTOFF(ex)); - up_write(¤t->mm->mmap_sem); retval = error; if (error != start_addr) goto out; diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 0708a0bf0ba..16f73541707 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -958,10 +958,8 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) and some applications "depend" upon this behavior. Since we do not have the power to recompile these, we emulate the SVr4 behavior. Sigh. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(NULL, 0, PAGE_SIZE, PROT_READ | PROT_EXEC, + error = vm_mmap(NULL, 0, PAGE_SIZE, PROT_READ | PROT_EXEC, MAP_FIXED | MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); } #ifdef ELF_PLAT_INIT @@ -1046,8 +1044,7 @@ static int load_elf_library(struct file *file) eppnt++; /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, + error = vm_mmap(file, ELF_PAGESTART(eppnt->p_vaddr), (eppnt->p_filesz + ELF_PAGEOFFSET(eppnt->p_vaddr)), @@ -1055,7 +1052,6 @@ static int load_elf_library(struct file *file) MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE, (eppnt->p_offset - ELF_PAGEOFFSET(eppnt->p_vaddr))); - up_write(¤t->mm->mmap_sem); if (error != ELF_PAGESTART(eppnt->p_vaddr)) goto out_free_ph; diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 9bd5612a822..d390a0fffc6 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -390,21 +390,17 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, (executable_stack == EXSTACK_DEFAULT && VM_STACK_FLAGS & VM_EXEC)) stack_prot |= PROT_EXEC; - down_write(¤t->mm->mmap_sem); - current->mm->start_brk = do_mmap(NULL, 0, stack_size, stack_prot, + current->mm->start_brk = vm_mmap(NULL, 0, stack_size, stack_prot, MAP_PRIVATE | MAP_ANONYMOUS | MAP_UNINITIALIZED | MAP_GROWSDOWN, 0); if (IS_ERR_VALUE(current->mm->start_brk)) { - up_write(¤t->mm->mmap_sem); retval = current->mm->start_brk; current->mm->start_brk = 0; goto error_kill; } - up_write(¤t->mm->mmap_sem); - current->mm->brk = current->mm->start_brk; current->mm->context.end_brk = current->mm->start_brk; current->mm->context.end_brk += @@ -955,10 +951,8 @@ static int elf_fdpic_map_file_constdisp_on_uclinux( if (params->flags & ELF_FDPIC_FLAG_EXECUTABLE) mflags |= MAP_EXECUTABLE; - down_write(&mm->mmap_sem); - maddr = do_mmap(NULL, load_addr, top - base, + maddr = vm_mmap(NULL, load_addr, top - base, PROT_READ | PROT_WRITE | PROT_EXEC, mflags, 0); - up_write(&mm->mmap_sem); if (IS_ERR_VALUE(maddr)) return (int) maddr; @@ -1096,10 +1090,8 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params, /* create the mapping */ disp = phdr->p_vaddr & ~PAGE_MASK; - down_write(&mm->mmap_sem); - maddr = do_mmap(file, maddr, phdr->p_memsz + disp, prot, flags, + maddr = vm_mmap(file, maddr, phdr->p_memsz + disp, prot, flags, phdr->p_offset - disp); - up_write(&mm->mmap_sem); kdebug("mmap[%d] sz=%lx pr=%x fl=%x of=%lx --> %08lx", loop, phdr->p_memsz + disp, prot, flags, @@ -1143,10 +1135,8 @@ static int elf_fdpic_map_file_by_direct_mmap(struct elf_fdpic_params *params, unsigned long xmaddr; flags |= MAP_FIXED | MAP_ANONYMOUS; - down_write(&mm->mmap_sem); - xmaddr = do_mmap(NULL, xaddr, excess - excess1, + xmaddr = vm_mmap(NULL, xaddr, excess - excess1, prot, flags, 0); - up_write(&mm->mmap_sem); kdebug("mmap[%d] " " ad=%lx sz=%lx pr=%x fl=%x of=0 --> %08lx", diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 024d20ee3ca..6b2daf99fab 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -542,10 +542,8 @@ static int load_flat_file(struct linux_binprm * bprm, */ DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n"); - down_write(¤t->mm->mmap_sem); - textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, + textpos = vm_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_EXECUTABLE, 0); - up_write(¤t->mm->mmap_sem); if (!textpos || IS_ERR_VALUE(textpos)) { if (!textpos) textpos = (unsigned long) -ENOMEM; @@ -556,10 +554,8 @@ static int load_flat_file(struct linux_binprm * bprm, len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long); len = PAGE_ALIGN(len); - down_write(¤t->mm->mmap_sem); - realdatastart = do_mmap(0, 0, len, + realdatastart = vm_mmap(0, 0, len, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); if (realdatastart == 0 || IS_ERR_VALUE(realdatastart)) { if (!realdatastart) @@ -603,10 +599,8 @@ static int load_flat_file(struct linux_binprm * bprm, len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long); len = PAGE_ALIGN(len); - down_write(¤t->mm->mmap_sem); - textpos = do_mmap(0, 0, len, + textpos = vm_mmap(0, 0, len, PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); if (!textpos || IS_ERR_VALUE(textpos)) { if (!textpos) diff --git a/fs/binfmt_som.c b/fs/binfmt_som.c index e4fc746629a..4517aaff61b 100644 --- a/fs/binfmt_som.c +++ b/fs/binfmt_som.c @@ -147,10 +147,8 @@ static int map_som_binary(struct file *file, code_size = SOM_PAGEALIGN(hpuxhdr->exec_tsize); current->mm->start_code = code_start; current->mm->end_code = code_start + code_size; - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, code_start, code_size, prot, + retval = vm_mmap(file, code_start, code_size, prot, flags, SOM_PAGESTART(hpuxhdr->exec_tfile)); - up_write(¤t->mm->mmap_sem); if (retval < 0 && retval > -1024) goto out; @@ -158,20 +156,16 @@ static int map_som_binary(struct file *file, data_size = SOM_PAGEALIGN(hpuxhdr->exec_dsize); current->mm->start_data = data_start; current->mm->end_data = bss_start = data_start + data_size; - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, data_start, data_size, + retval = vm_mmap(file, data_start, data_size, prot | PROT_WRITE, flags, SOM_PAGESTART(hpuxhdr->exec_dfile)); - up_write(¤t->mm->mmap_sem); if (retval < 0 && retval > -1024) goto out; som_brk = bss_start + SOM_PAGEALIGN(hpuxhdr->exec_bsize); current->mm->start_brk = current->mm->brk = som_brk; - down_write(¤t->mm->mmap_sem); - retval = do_mmap(NULL, bss_start, som_brk - bss_start, + retval = vm_mmap(NULL, bss_start, som_brk - bss_start, prot | PROT_WRITE, MAP_FIXED | MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); if (retval > 0 || retval < -1024) retval = 0; out: diff --git a/include/linux/mm.h b/include/linux/mm.h index cb61950a3aa..86a692c3b23 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1393,31 +1393,20 @@ extern int install_special_mapping(struct mm_struct *mm, extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); -extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, - unsigned long len, unsigned long prot, - unsigned long flag, unsigned long pgoff); extern unsigned long mmap_region(struct file *file, unsigned long addr, unsigned long len, unsigned long flags, vm_flags_t vm_flags, unsigned long pgoff); - -static inline unsigned long do_mmap(struct file *file, unsigned long addr, - unsigned long len, unsigned long prot, - unsigned long flag, unsigned long offset) -{ - unsigned long ret = -EINVAL; - if ((offset + PAGE_ALIGN(len)) < offset) - goto out; - if (!(offset & ~PAGE_MASK)) - ret = do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT); -out: - return ret; -} - +extern unsigned long do_mmap(struct file *, unsigned long, + unsigned long, unsigned long, + unsigned long, unsigned long); extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); extern int vm_munmap(struct mm_struct *, unsigned long, size_t); +extern unsigned long vm_mmap(struct file *, unsigned long, + unsigned long, unsigned long, + unsigned long, unsigned long); /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); diff --git a/mm/mmap.c b/mm/mmap.c index 4af45f519f1..b38b47ef1f7 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -953,7 +953,7 @@ static inline unsigned long round_hint_to_min(unsigned long hint) * The caller must hold down_write(¤t->mm->mmap_sem). */ -unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, +static unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long pgoff) { @@ -1089,7 +1089,32 @@ unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, return mmap_region(file, addr, len, flags, vm_flags, pgoff); } -EXPORT_SYMBOL(do_mmap_pgoff); + +unsigned long do_mmap(struct file *file, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long offset) +{ + if (unlikely(offset + PAGE_ALIGN(len) < offset)) + return -EINVAL; + if (unlikely(offset & ~PAGE_MASK)) + return -EINVAL; + return do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT); +} +EXPORT_SYMBOL(do_mmap); + +unsigned long vm_mmap(struct file *file, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long offset) +{ + unsigned long ret; + struct mm_struct *mm = current->mm; + + down_write(&mm->mmap_sem); + ret = do_mmap(file, addr, len, prot, flag, offset); + up_write(&mm->mmap_sem); + return ret; +} +EXPORT_SYMBOL(vm_mmap); SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, diff --git a/mm/nommu.c b/mm/nommu.c index 11a69b22bd4..dd00383be2d 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1233,7 +1233,7 @@ enomem: /* * handle mapping creation for uClinux */ -unsigned long do_mmap_pgoff(struct file *file, +static unsigned long do_mmap_pgoff(struct file *file, unsigned long addr, unsigned long len, unsigned long prot, @@ -1470,7 +1470,32 @@ error_getting_region: show_free_areas(0); return -ENOMEM; } -EXPORT_SYMBOL(do_mmap_pgoff); + +unsigned long do_mmap(struct file *file, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long offset) +{ + if (unlikely(offset + PAGE_ALIGN(len) < offset)) + return -EINVAL; + if (unlikely(offset & ~PAGE_MASK)) + return -EINVAL; + return do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT); +} +EXPORT_SYMBOL(do_mmap); + +unsigned long vm_mmap(struct file *file, unsigned long addr, + unsigned long len, unsigned long prot, + unsigned long flag, unsigned long offset) +{ + unsigned long ret; + struct mm_struct *mm = current->mm; + + down_write(&mm->mmap_sem); + ret = do_mmap(file, addr, len, prot, flag, offset); + up_write(&mm->mmap_sem); + return ret; +} +EXPORT_SYMBOL(vm_mmap); SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, -- cgit v1.2.3-70-g09d2 From 32d317c60e56c2a34463b51fc0336cc96b3e1735 Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong Date: Wed, 11 Apr 2012 19:54:38 +0800 Subject: mmc: remove MMC bus legacy suspend/resume method MMC bus is using legacy suspend/resume method, which is not compatible if runtime pm callbacks are used. In this scenario, MMC bus suspend/resume callbacks cannot be called when system entering S3. So change to use the new defined dev_pm_ops for system sleeping mode. Tested on AM335x Platform. Solves major issue/crash reported at http://www.mail-archive.com/linux-omap@vger.kernel.org/msg65425.html Signed-off-by: Chuanxiao Dong Tested-by: Hebbar, Gururaja Acked-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 2 +- drivers/mmc/core/bus.c | 24 ++++++++---------------- include/linux/mmc/card.h | 2 +- 3 files changed, 10 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4232bc4d992..dabec556ebb 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1824,7 +1824,7 @@ static void mmc_blk_remove(struct mmc_card *card) } #ifdef CONFIG_PM -static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) +static int mmc_blk_suspend(struct mmc_card *card) { struct mmc_blk_data *part_md; struct mmc_blk_data *md = mmc_get_drvdata(card); diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 3f606068d55..c60cee92a2b 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -122,14 +122,14 @@ static int mmc_bus_remove(struct device *dev) return 0; } -static int mmc_bus_suspend(struct device *dev, pm_message_t state) +static int mmc_bus_suspend(struct device *dev) { struct mmc_driver *drv = to_mmc_driver(dev->driver); struct mmc_card *card = mmc_dev_to_card(dev); int ret = 0; if (dev->driver && drv->suspend) - ret = drv->suspend(card, state); + ret = drv->suspend(card); return ret; } @@ -165,20 +165,14 @@ static int mmc_runtime_idle(struct device *dev) return pm_runtime_suspend(dev); } +#endif /* !CONFIG_PM_RUNTIME */ + static const struct dev_pm_ops mmc_bus_pm_ops = { - .runtime_suspend = mmc_runtime_suspend, - .runtime_resume = mmc_runtime_resume, - .runtime_idle = mmc_runtime_idle, + SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, + mmc_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume) }; -#define MMC_PM_OPS_PTR (&mmc_bus_pm_ops) - -#else /* !CONFIG_PM_RUNTIME */ - -#define MMC_PM_OPS_PTR NULL - -#endif /* !CONFIG_PM_RUNTIME */ - static struct bus_type mmc_bus_type = { .name = "mmc", .dev_attrs = mmc_dev_attrs, @@ -186,9 +180,7 @@ static struct bus_type mmc_bus_type = { .uevent = mmc_bus_uevent, .probe = mmc_bus_probe, .remove = mmc_bus_remove, - .suspend = mmc_bus_suspend, - .resume = mmc_bus_resume, - .pm = MMC_PM_OPS_PTR, + .pm = &mmc_bus_pm_ops, }; int mmc_register_bus(void) diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 01beae78f07..629b823f883 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -481,7 +481,7 @@ struct mmc_driver { struct device_driver drv; int (*probe)(struct mmc_card *); void (*remove)(struct mmc_card *); - int (*suspend)(struct mmc_card *, pm_message_t); + int (*suspend)(struct mmc_card *); int (*resume)(struct mmc_card *); }; -- cgit v1.2.3-70-g09d2 From a99aa9b9b4f4f3e496d17a1b4e0ff63fb0c9f31d Mon Sep 17 00:00:00 2001 From: Seungwon Jeon Date: Tue, 10 Apr 2012 09:53:32 +0900 Subject: mmc: dw_mmc: Fix switch from DMA to PIO When dw_mci_pre_dma_transfer returns failure in some reasons, dw_mci_submit_data will prepare to switch the PIO mode from DMA. After switching to PIO mode, DMA(IDMAC in particular) is still enabled. This makes the corruption in handling interrupt and the driver lock-up. Signed-off-by: Seungwon Jeon Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index bf3c9b456aa..f3b0fcd002d 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -526,8 +526,10 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) return -ENODEV; sg_len = dw_mci_pre_dma_transfer(host, data, 0); - if (sg_len < 0) + if (sg_len < 0) { + host->dma_ops->stop(host); return sg_len; + } host->using_dma = 1; -- cgit v1.2.3-70-g09d2 From 87b87a3fc0eec58d95e4216392f889a26439ad22 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Tue, 10 Apr 2012 00:14:20 +0100 Subject: mmc: sdhci: refine non-removable card checking for card detection Commit c79396c191bc19 ("mmc: sdhci: prevent card detection activity for non-removable cards") disables card detection where the cards are marked as non-removable. This makes sense, but the implementation detail of calling mmc_card_is_removable() causes some problems, because mmc_card_is_removable() is overloaded with CONFIG_MMC_UNSAFE_RESUME semantics. In the OLPC XO case, we need CONFIG_MMC_UNSAFE_RESUME because our root filesystem is stored on SD, but we also have external SD card slots where we want automatic card detection. Refine the check to only apply to hosts marked as MMC_CAP_NONREMOVABLE, which is defined to mean that the card is *really* nonremovable. This could be revisited in future if we find a way to improve CONFIG_MMC_UNSAFE_RESUME semantics. Signed-off-by: Daniel Drake Acked-by: Chuanxiao Dong [stable@: please apply to 3.3-stable] Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9aa77f3f04a..ccefdebeff1 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -147,7 +147,7 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable) u32 present, irqs; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) || - !mmc_card_is_removable(host->mmc)) + (host->mmc->caps & MMC_CAP_NONREMOVABLE)) return; present = sdhci_readl(host, SDHCI_PRESENT_STATE) & -- cgit v1.2.3-70-g09d2 From 5ca6518832ac913ac277b50ceddda8372dbf7bea Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 17 Apr 2012 13:03:38 -0700 Subject: mmc: cd-gpio: Include header to pickup exported symbol prototypes Include the linux/mmc/cd-gpio.h header to pickup the prototypes for the two exported symbols. This quiets the sparse warnings: warning: symbol 'mmc_cd_gpio_request' was not declared. Should it be static? warning: symbol 'mmc_cd_gpio_free' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten Acked-by: Guennadi Liakhovetski Acked-by: Venkatraman S Signed-off-by: Chris Ball --- drivers/mmc/core/cd-gpio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/core/cd-gpio.c b/drivers/mmc/core/cd-gpio.c index 29de31e260d..2c14be73254 100644 --- a/drivers/mmc/core/cd-gpio.c +++ b/drivers/mmc/core/cd-gpio.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From b89152824f993a9572b47eb31f4579feadeac34c Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Wed, 18 Apr 2012 02:30:20 +0200 Subject: mmc: unbreak sdhci-esdhc-imx on i.MX25 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was broken by me in 37865fe91582582a6f6c00652f6a2b1ff71f8a78 ("mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci") where more extensive tests would have shown that read or write of data to the card were failing (even if the partition table was correctly read). Signed-off-by: Eric Bénard Acked-by: Wolfram Sang Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 6193a0d7bde..8abdaf6697a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -467,8 +467,7 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) clk_prepare_enable(clk); pltfm_host->clk = clk; - if (!is_imx25_esdhc(imx_data)) - host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data)) /* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */ -- cgit v1.2.3-70-g09d2 From e1631f989e0c6c8d9b43a2dbdd1097f70da603a5 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Wed, 18 Apr 2012 15:42:31 +0900 Subject: mmc: dw_mmc: prevent NULL dereference for dma_ops Now, dma_ops is assumed that use the IDMAC. But if dma_ops is assigned the pdata->dma_ops, we didn't ensure that callback function is defined. If the callback isn't defined, then we should run in PIO mode. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Will Newton Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index f3b0fcd002d..ab3fc461710 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1881,7 +1881,8 @@ static void dw_mci_init_dma(struct dw_mci *host) if (!host->dma_ops) goto no_dma; - if (host->dma_ops->init) { + if (host->dma_ops->init && host->dma_ops->start && + host->dma_ops->stop && host->dma_ops->cleanup) { if (host->dma_ops->init(host)) { dev_err(&host->dev, "%s: Unable to initialize " "DMA Controller.\n", __func__); -- cgit v1.2.3-70-g09d2 From 7c5709194096beea1ab6e6db46768d70a068efb0 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 19 Apr 2012 11:55:25 +0200 Subject: mmc: core: Do not pre-claim host in suspend Since SDIO drivers may want to do some SDIO operations in their suspend callback functions, we must not keep the host claimed when calling them. Daniel Drake reported that libertas_sdio encountered a deadlock in its suspend function. Signed-off-by: Ulf Hansson Tested-by: Daniel Drake [stable@: please apply to 3.2-stable and 3.3-stable] Cc: stable Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 55 ++++++++++++++++++------------------------------- 1 file changed, 20 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index e541efbf325..ba821fe70bc 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2238,6 +2238,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable) mmc_card_is_removable(host)) return err; + mmc_claim_host(host); if (card && mmc_card_mmc(card) && (card->ext_csd.cache_size > 0)) { enable = !!enable; @@ -2255,6 +2256,7 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable) card->ext_csd.cache_ctrl = enable; } } + mmc_release_host(host); return err; } @@ -2272,49 +2274,32 @@ int mmc_suspend_host(struct mmc_host *host) cancel_delayed_work(&host->detect); mmc_flush_scheduled_work(); - if (mmc_try_claim_host(host)) { - err = mmc_cache_ctrl(host, 0); - mmc_release_host(host); - } else { - err = -EBUSY; - } + err = mmc_cache_ctrl(host, 0); if (err) goto out; mmc_bus_get(host); if (host->bus_ops && !host->bus_dead) { - /* - * A long response time is not acceptable for device drivers - * when doing suspend. Prevent mmc_claim_host in the suspend - * sequence, to potentially wait "forever" by trying to - * pre-claim the host. - */ - if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) { - err = host->bus_ops->suspend(host); - } - mmc_release_host(host); + if (host->bus_ops->suspend) + err = host->bus_ops->suspend(host); - if (err == -ENOSYS || !host->bus_ops->resume) { - /* - * We simply "remove" the card in this case. - * It will be redetected on resume. (Calling - * bus_ops->remove() with a claimed host can - * deadlock.) - */ - if (host->bus_ops->remove) - host->bus_ops->remove(host); - mmc_claim_host(host); - mmc_detach_bus(host); - mmc_power_off(host); - mmc_release_host(host); - host->pm_flags = 0; - err = 0; - } - } else { - err = -EBUSY; + if (err == -ENOSYS || !host->bus_ops->resume) { + /* + * We simply "remove" the card in this case. + * It will be redetected on resume. (Calling + * bus_ops->remove() with a claimed host can + * deadlock.) + */ + if (host->bus_ops->remove) + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + host->pm_flags = 0; + err = 0; } } mmc_bus_put(host); -- cgit v1.2.3-70-g09d2 From bfce281c287a427d0841fadf5d59242757b4e620 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 20 Apr 2012 21:57:04 -0400 Subject: kill mm argument of vm_munmap() it's always current->mm Signed-off-by: Al Viro --- arch/ia64/kernel/perfmon.c | 2 +- arch/sparc/kernel/sys_sparc_64.c | 2 +- arch/x86/kvm/x86.c | 2 +- drivers/gpu/drm/i810/i810_dma.c | 3 +-- fs/aio.c | 2 +- include/linux/mm.h | 2 +- mm/mmap.c | 5 +++-- mm/nommu.c | 5 +++-- 8 files changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 899c0fa5b49..f00ba025375 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1468,7 +1468,7 @@ pfm_remove_smpl_mapping(void *vaddr, unsigned long size) /* * does the actual unmapping */ - r = vm_munmap(current->mm, (unsigned long)vaddr, size); + r = vm_munmap((unsigned long)vaddr, size); if (r !=0) { printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size); diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 022e57aadf5..3ee51f189a5 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -569,7 +569,7 @@ SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) if (invalid_64bit_range(addr, len)) return -EINVAL; - return vm_munmap(current->mm, addr, len); + return vm_munmap(addr, len); } extern unsigned long do_mremap(unsigned long addr, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 1457be305fb..91a5e989abc 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6364,7 +6364,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, if (!user_alloc && !old.user_alloc && old.rmap && !npages) { int ret; - ret = vm_munmap(current->mm, old.userspace_addr, + ret = vm_munmap(old.userspace_addr, old.npages * PAGE_SIZE); if (ret < 0) printk(KERN_WARNING diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index a4ba453b3d2..f920fb5e42b 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -158,8 +158,7 @@ static int i810_unmap_buffer(struct drm_buf *buf) if (buf_priv->currently_mapped != I810_BUF_MAPPED) return -EINVAL; - retcode = vm_munmap(current->mm, - (unsigned long)buf_priv->virtual, + retcode = vm_munmap((unsigned long)buf_priv->virtual, (size_t) buf->total); buf_priv->currently_mapped = I810_BUF_UNMAPPED; diff --git a/fs/aio.c b/fs/aio.c index 976e33d9741..67a6db3e1b6 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -94,7 +94,7 @@ static void aio_free_ring(struct kioctx *ctx) if (info->mmap_size) { BUG_ON(ctx->mm != current->mm); - vm_munmap(ctx->mm, info->mmap_base, info->mmap_size); + vm_munmap(info->mmap_base, info->mmap_size); } if (info->ring_pages && info->ring_pages != info->internal_pages) diff --git a/include/linux/mm.h b/include/linux/mm.h index 86a692c3b23..74aa71bea1e 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1403,7 +1403,7 @@ extern int do_munmap(struct mm_struct *, unsigned long, size_t); /* These take the mm semaphore themselves */ extern unsigned long vm_brk(unsigned long, unsigned long); -extern int vm_munmap(struct mm_struct *, unsigned long, size_t); +extern int vm_munmap(unsigned long, size_t); extern unsigned long vm_mmap(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); diff --git a/mm/mmap.c b/mm/mmap.c index b38b47ef1f7..848ef52d960 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2134,9 +2134,10 @@ int do_munmap(struct mm_struct *mm, unsigned long start, size_t len) } EXPORT_SYMBOL(do_munmap); -int vm_munmap(struct mm_struct *mm, unsigned long start, size_t len) +int vm_munmap(unsigned long start, size_t len) { int ret; + struct mm_struct *mm = current->mm; down_write(&mm->mmap_sem); ret = do_munmap(mm, start, len); @@ -2148,7 +2149,7 @@ EXPORT_SYMBOL(vm_munmap); SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) { profile_munmap(addr); - return vm_munmap(current->mm, addr, len); + return vm_munmap(addr, len); } static inline void verify_mm_writelocked(struct mm_struct *mm) diff --git a/mm/nommu.c b/mm/nommu.c index dd00383be2d..bb8f4f004a8 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1734,8 +1734,9 @@ erase_whole_vma: } EXPORT_SYMBOL(do_munmap); -int vm_munmap(struct mm_struct *mm, unsigned long addr, size_t len) +int vm_munmap(unsigned long addr, size_t len) { + struct mm_struct *mm = current->mm; int ret; down_write(&mm->mmap_sem); @@ -1747,7 +1748,7 @@ EXPORT_SYMBOL(vm_munmap); SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len) { - return vm_munmap(current->mm, addr, len); + return vm_munmap(addr, len); } /* -- cgit v1.2.3-70-g09d2