From 42f14c4b454946650cf0bf66e0b631d02e328f61 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 20 Jul 2010 11:27:54 -0400 Subject: drm/radeon/kms: fix shared ddc harder This fixes a regression caused by b2ea4aa67bfd084834edd070e0a4a47857d6db59 due to the way shared ddc with multiple digital connectors was handled. You generally have two cases where DDC lines are shared: - HDMI + VGA - HDMI + DVI-D HDMI + VGA is easy to deal with because you can check the EDID for the to see if the attached monitor is digital. A shared DDC line with two digital connectors is more complex. You can't use the hdmi bits in the EDID since they may not be there with DVI<->HDMI adapters. In this case all we can do is check the HPD pins to see which is connected as we have no way of knowing using the EDID. Reported-by: trapdoor6@gmail.com Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index f58f8bd8f77..adccbc2c202 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -771,14 +771,14 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else ret = connector_status_connected; - /* multiple connectors on the same encoder with the same ddc line - * This tends to be HDMI and DVI on the same encoder with the - * same ddc line. If the edid says HDMI, consider the HDMI port - * connected and the DVI port disconnected. If the edid doesn't - * say HDMI, vice versa. + /* This gets complicated. We have boards with VGA + HDMI with a + * shared DDC line and we have boards with DVI-D + HDMI with a shared + * DDC line. The latter is more complex because with DVI<->HDMI adapters + * you don't really know what's connected to which port as both are digital. */ if (radeon_connector->shared_ddc && (ret == connector_status_connected)) { struct drm_device *dev = connector->dev; + struct radeon_device *rdev = dev->dev_private; struct drm_connector *list_connector; struct radeon_connector *list_radeon_connector; list_for_each_entry(list_connector, &dev->mode_config.connector_list, head) { @@ -788,15 +788,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect if (list_radeon_connector->shared_ddc && (list_radeon_connector->ddc_bus->rec.i2c_id == radeon_connector->ddc_bus->rec.i2c_id)) { - if (drm_detect_hdmi_monitor(radeon_connector->edid)) { - if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) { - kfree(radeon_connector->edid); - radeon_connector->edid = NULL; - ret = connector_status_disconnected; - } - } else { - if ((connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) || - (connector->connector_type == DRM_MODE_CONNECTOR_HDMIB)) { + /* cases where both connectors are digital */ + if (list_connector->connector_type != DRM_MODE_CONNECTOR_VGA) { + /* hpd is our only option in this case */ + if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) { kfree(radeon_connector->edid); radeon_connector->edid = NULL; ret = connector_status_disconnected; -- cgit v1.2.3-70-g09d2