From 9326e3614d72e40ea8d910fed829ec72c9b70798 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 1 Oct 2009 16:47:39 -0700 Subject: MIPS: Octeon: Fix compile error in drivers/staging/octeon/ethernet-mdio.c Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 42230e62a22..31a58e50892 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -170,7 +170,7 @@ static u32 cvm_oct_get_link(struct net_device *dev) return ret; } -struct const ethtool_ops cvm_oct_ethtool_ops = { +const struct ethtool_ops cvm_oct_ethtool_ops = { .get_drvinfo = cvm_oct_get_drvinfo, .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, -- cgit v1.2.3-70-g09d2 From aabb89d6fa4c70d77fe180ee794f857decde4010 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 3 Sep 2009 16:10:47 -0700 Subject: Staging: Octeon: Use symbolic values for irq numbers. In addition to being magic numbers, the irq number passed to free_irq is incorrect. We need to use the correct symbolic value instead. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 66190b0cb68..00dc0f4bad1 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -317,6 +317,6 @@ void cvm_oct_spi_uninit(struct net_device *dev) cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0); cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0); } - free_irq(8 + 46, &number_spi_ports); + free_irq(OCTEON_IRQ_RML, &number_spi_ports); } } -- cgit v1.2.3-70-g09d2 From 13c5939e42dc11da61e00fef7f6cca2a6824a59f Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 12 Oct 2009 12:04:32 -0700 Subject: Staging: octeon-ethernet: Assign proper MAC addresses. Allocate MAC addresses using the same method as the bootloader. This avoids changing the MAC between bootloader and kernel operation as well as avoiding duplicates and use of addresses outside of the assigned range. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet.c | 53 ++++++++++++++++++++++++++++++--------- 1 file changed, 41 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index b8479517dce..492c5029992 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -111,6 +111,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n" "\tallows packets to be sent without lock contention in the packet\n" "\tscheduler resulting in some cases in improved throughput.\n"); + +/* + * The offset from mac_addr_base that should be used for the next port + * that is configured. By convention, if any mgmt ports exist on the + * chip, they get the first mac addresses, The ports controlled by + * this driver are numbered sequencially following any mgmt addresses + * that may exist. + */ +static unsigned int cvm_oct_mac_addr_offset; + /** * Periodic timer to check auto negotiation */ @@ -474,16 +484,30 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) */ int cvm_oct_common_init(struct net_device *dev) { - static int count; - char mac[8] = { 0x00, 0x00, - octeon_bootinfo->mac_addr_base[0], - octeon_bootinfo->mac_addr_base[1], - octeon_bootinfo->mac_addr_base[2], - octeon_bootinfo->mac_addr_base[3], - octeon_bootinfo->mac_addr_base[4], - octeon_bootinfo->mac_addr_base[5] + count - }; struct octeon_ethernet *priv = netdev_priv(dev); + struct sockaddr sa; + u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) | + ((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) | + ((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) | + ((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) | + ((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) | + (u64)(octeon_bootinfo->mac_addr_base[5] & 0xff); + + mac += cvm_oct_mac_addr_offset; + sa.sa_data[0] = (mac >> 40) & 0xff; + sa.sa_data[1] = (mac >> 32) & 0xff; + sa.sa_data[2] = (mac >> 24) & 0xff; + sa.sa_data[3] = (mac >> 16) & 0xff; + sa.sa_data[4] = (mac >> 8) & 0xff; + sa.sa_data[5] = mac & 0xff; + + if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count) + printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:" + " %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + sa.sa_data[0] & 0xff, sa.sa_data[1] & 0xff, + sa.sa_data[2] & 0xff, sa.sa_data[3] & 0xff, + sa.sa_data[4] & 0xff, sa.sa_data[5] & 0xff); + cvm_oct_mac_addr_offset++; /* * Force the interface to use the POW send if always_use_pow @@ -496,14 +520,12 @@ int cvm_oct_common_init(struct net_device *dev) if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM) dev->features |= NETIF_F_IP_CSUM; - count++; - /* We do our own locking, Linux doesn't need to */ dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); cvm_oct_mdio_setup_device(dev); - dev->netdev_ops->ndo_set_mac_address(dev, mac); + dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); /* @@ -620,6 +642,13 @@ static int __init cvm_oct_init_module(void) pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */ + else if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */ + else + cvm_oct_mac_addr_offset = 0; + cvm_oct_proc_initialize(); cvm_oct_rx_initialize(); cvm_oct_configure_common_hw(); -- cgit v1.2.3-70-g09d2