From 569ff1022662a88591b0a89ea316a3c44306d199 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 11 Oct 2007 08:06:29 -0400 Subject: hwmon: Add new combined driver for FSC chips This patch adds a new merged driver for FSC sensor chips, it merges the fscher and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall chips. Signed-off-by: Hans de Goede Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/Kconfig | 14 + drivers/hwmon/Makefile | 1 + drivers/hwmon/fschmd.c | 778 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 793 insertions(+) create mode 100644 drivers/hwmon/fschmd.c (limited to 'drivers') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c69de6c56d9..e47f8817080 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -266,6 +266,20 @@ config SENSORS_FSCPOS This driver can also be built as a module. If so, the module will be called fscpos. +config SENSORS_FSCHMD + tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles" + depends on X86 && I2C && EXPERIMENTAL + help + If you say yes here you get support for various Fujitsu Siemens + Computers sensor chips. + + This is a new merged driver for FSC sensor chips which is intended + as a replacment for the fscpos, fscscy and fscher drivers and adds + support for several other FCS sensor chips. + + This driver can also be built as a module. If so, the module + will be called fschmd. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 2f592e2e01b..6da3eef9430 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_SENSORS_F71805F) += f71805f.o obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o obj-$(CONFIG_SENSORS_F75375S) += f75375s.o obj-$(CONFIG_SENSORS_FSCHER) += fscher.o +obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c new file mode 100644 index 00000000000..63a4df0580d --- /dev/null +++ b/drivers/hwmon/fschmd.c @@ -0,0 +1,778 @@ +/* fschmd.c + * + * Copyright (C) 2007 Hans de Goede + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes, + * Scylla, Heracles and Heimdall chips + * + * Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6 + * (candidate) fschmd drivers: + * Copyright (C) 2006 Thilo Cestonaro + * + * Copyright (C) 2004, 2005 Stefan Ott + * Copyright (C) 2003, 2004 Reinhard Nissl + * Copyright (c) 2001 Martin Knoblauch + * Copyright (C) 2000 Hermann Jung + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd); + +/* + * The FSCHMD registers and other defines + */ + +/* chip identification */ +#define FSCHMD_REG_IDENT_0 0x00 +#define FSCHMD_REG_IDENT_1 0x01 +#define FSCHMD_REG_IDENT_2 0x02 +#define FSCHMD_REG_REVISION 0x03 + +/* global control and status */ +#define FSCHMD_REG_EVENT_STATE 0x04 +#define FSCHMD_REG_CONTROL 0x05 + +#define FSCHMD_CONTROL_ALERT_LED_MASK 0x01 + +/* watchdog (support to be implemented) */ +#define FSCHMD_REG_WDOG_PRESET 0x28 +#define FSCHMD_REG_WDOG_STATE 0x23 +#define FSCHMD_REG_WDOG_CONTROL 0x21 + +/* voltages, weird order is to keep the same order as the old drivers */ +static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 }; + +/* minimum pwm at which the fan is driven (pwm can by increased depending on + the temp. Notice that for the scy some fans share there minimum speed. + Also notice that with the scy the sensor order is different then with the + other chips, this order was in the 2.4 driver and kept for consistency. */ +static const u8 FSCHMD_REG_FAN_MIN[5][6] = { + { 0x55, 0x65 }, /* pos */ + { 0x55, 0x65, 0xb5 }, /* her */ + { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 }, /* scy */ + { 0x55, 0x65, 0xa5, 0xb5 }, /* hrc */ + { 0x55, 0x65, 0xa5, 0xb5, 0xc5 }, /* hmd */ +}; + +/* actual fan speed */ +static const u8 FSCHMD_REG_FAN_ACT[5][6] = { + { 0x0e, 0x6b, 0xab }, /* pos */ + { 0x0e, 0x6b, 0xbb }, /* her */ + { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb }, /* scy */ + { 0x0e, 0x6b, 0xab, 0xbb }, /* hrc */ + { 0x5b, 0x6b, 0xab, 0xbb, 0xcb }, /* hmd */ +}; + +/* fan status registers */ +static const u8 FSCHMD_REG_FAN_STATE[5][6] = { + { 0x0d, 0x62, 0xa2 }, /* pos */ + { 0x0d, 0x62, 0xb2 }, /* her */ + { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 }, /* scy */ + { 0x0d, 0x62, 0xa2, 0xb2 }, /* hrc */ + { 0x52, 0x62, 0xa2, 0xb2, 0xc2 }, /* hmd */ +}; + +/* fan ripple / divider registers */ +static const u8 FSCHMD_REG_FAN_RIPPLE[5][6] = { + { 0x0f, 0x6f, 0xaf }, /* pos */ + { 0x0f, 0x6f, 0xbf }, /* her */ + { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf }, /* scy */ + { 0x0f, 0x6f, 0xaf, 0xbf }, /* hrc */ + { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf }, /* hmd */ +}; + +static const int FSCHMD_NO_FAN_SENSORS[5] = { 3, 3, 6, 4, 5 }; + +/* Fan status register bitmasks */ +#define FSCHMD_FAN_ALARM_MASK 0x04 /* called fault by FSC! */ +#define FSCHMD_FAN_NOT_PRESENT_MASK 0x08 /* not documented */ + + +/* actual temperature registers */ +static const u8 FSCHMD_REG_TEMP_ACT[5][5] = { + { 0x64, 0x32, 0x35 }, /* pos */ + { 0x64, 0x32, 0x35 }, /* her */ + { 0x64, 0xD0, 0x32, 0x35 }, /* scy */ + { 0x64, 0x32, 0x35 }, /* hrc */ + { 0x70, 0x80, 0x90, 0xd0, 0xe0 }, /* hmd */ +}; + +/* temperature state registers */ +static const u8 FSCHMD_REG_TEMP_STATE[5][5] = { + { 0x71, 0x81, 0x91 }, /* pos */ + { 0x71, 0x81, 0x91 }, /* her */ + { 0x71, 0xd1, 0x81, 0x91 }, /* scy */ + { 0x71, 0x81, 0x91 }, /* hrc */ + { 0x71, 0x81, 0x91, 0xd1, 0xe1 }, /* hmd */ +}; + +/* temperature high limit registers, FSC does not document these. Proven to be + there with field testing on the fscher and fschrc, already supported / used + in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers + at these addresses, but doesn't want to confirm they are the same as with + the fscher?? */ +static const u8 FSCHMD_REG_TEMP_LIMIT[5][5] = { + { 0, 0, 0 }, /* pos */ + { 0x76, 0x86, 0x96 }, /* her */ + { 0x76, 0xd6, 0x86, 0x96 }, /* scy */ + { 0x76, 0x86, 0x96 }, /* hrc */ + { 0x76, 0x86, 0x96, 0xd6, 0xe6 }, /* hmd */ +}; + +/* These were found through experimenting with an fscher, currently they are + not used, but we keep them around for future reference. +static const u8 FSCHER_REG_TEMP_AUTOP1[] = { 0x73, 0x83, 0x93 }; +static const u8 FSCHER_REG_TEMP_AUTOP2[] = { 0x75, 0x85, 0x95 }; */ + +static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; + +/* temp status register bitmasks */ +#define FSCHMD_TEMP_WORKING_MASK 0x01 +#define FSCHMD_TEMP_ALERT_MASK 0x02 +/* there only really is an alarm if the sensor is working and alert == 1 */ +#define FSCHMD_TEMP_ALARM_MASK \ + (FSCHMD_TEMP_WORKING_MASK | FSCHMD_TEMP_ALERT_MASK) + +/* our driver name */ +#define FSCHMD_NAME "fschmd" + +/* + * Functions declarations + */ + +static int fschmd_attach_adapter(struct i2c_adapter *adapter); +static int fschmd_detach_client(struct i2c_client *client); +static struct fschmd_data *fschmd_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver fschmd_driver = { + .driver = { + .name = FSCHMD_NAME, + }, + .attach_adapter = fschmd_attach_adapter, + .detach_client = fschmd_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct fschmd_data { + struct i2c_client client; + struct device *hwmon_dev; + struct mutex update_lock; + int kind; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + u8 global_control; /* global control register */ + u8 volt[3]; /* 12, 5, battery voltage */ + u8 temp_act[5]; /* temperature */ + u8 temp_status[5]; /* status of sensor */ + u8 temp_max[5]; /* high temp limit, notice: undocumented! */ + u8 fan_act[6]; /* fans revolutions per second */ + u8 fan_status[6]; /* fan status */ + u8 fan_min[6]; /* fan min value for rps */ + u8 fan_ripple[6]; /* divider for rps */ +}; + +/* + * Sysfs attr show / store functions + */ + +static ssize_t show_in_value(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + const int max_reading[3] = { 14200, 6600, 3300 }; + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%d\n", (data->volt[index] * + max_reading[index] + 128) / 255); +} + + +#define TEMP_FROM_REG(val) (((val) - 128) * 1000) + +static ssize_t show_temp_value(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index])); +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index])); +} + +static ssize_t store_temp_max(struct device *dev, struct device_attribute + *devattr, const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + long v = simple_strtol(buf, NULL, 10) / 1000; + + v = SENSORS_LIMIT(v, -128, 127) + 128; + + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(&data->client, + FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); + data->temp_max[index] = v; + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_temp_fault(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + /* bit 0 set means sensor working ok, so no fault! */ + if (data->temp_status[index] & FSCHMD_TEMP_WORKING_MASK) + return sprintf(buf, "0\n"); + else + return sprintf(buf, "1\n"); +} + +static ssize_t show_temp_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) == + FSCHMD_TEMP_ALARM_MASK) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + + +#define RPM_FROM_REG(val) ((val) * 60) + +static ssize_t show_fan_value(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index])); +} + +static ssize_t show_fan_div(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + /* bits 2..7 reserved => mask with 3 */ + return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3)); +} + +static ssize_t store_fan_div(struct device *dev, struct device_attribute + *devattr, const char *buf, size_t count) +{ + u8 reg; + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + /* supported values: 2, 4, 8 */ + unsigned long v = simple_strtoul(buf, NULL, 10); + + switch (v) { + case 2: v = 1; break; + case 4: v = 2; break; + case 8: v = 3; break; + default: + dev_err(dev, "fan_div value %lu not supported. " + "Choose one of 2, 4 or 8!\n", v); + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + reg = i2c_smbus_read_byte_data(&data->client, + FSCHMD_REG_FAN_RIPPLE[data->kind][index]); + + /* bits 2..7 reserved => mask with 0x03 */ + reg &= ~0x03; + reg |= v; + + i2c_smbus_write_byte_data(&data->client, + FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); + + data->fan_ripple[index] = reg; + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_fan_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->fan_status[index] & FSCHMD_FAN_ALARM_MASK) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static ssize_t show_fan_fault(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT_MASK) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + + +static ssize_t show_pwm_auto_point1_pwm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + int val = fschmd_update_device(dev)->fan_min[index]; + + /* 0 = allow turning off, 1-255 = 50-100% */ + if (val) + val = val / 2 + 128; + + return sprintf(buf, "%d\n", val); +} + +static ssize_t store_pwm_auto_point1_pwm(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct fschmd_data *data = dev_get_drvdata(dev); + unsigned long v = simple_strtoul(buf, NULL, 10); + + /* register: 0 = allow turning off, 1-255 = 50-100% */ + if (v) { + v = SENSORS_LIMIT(v, 128, 255); + v = (v - 128) * 2 + 1; + } + + mutex_lock(&data->update_lock); + + i2c_smbus_write_byte_data(&data->client, + FSCHMD_REG_FAN_MIN[data->kind][index], v); + data->fan_min[index] = v; + + mutex_unlock(&data->update_lock); + + return count; +} + + +/* The FSC hwmon family has the ability to force an attached alert led to flash + from software, we export this as an alert_led sysfs attr */ +static ssize_t show_alert_led(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct fschmd_data *data = fschmd_update_device(dev); + + if (data->global_control & FSCHMD_CONTROL_ALERT_LED_MASK) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static ssize_t store_alert_led(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + u8 reg; + struct fschmd_data *data = dev_get_drvdata(dev); + unsigned long v = simple_strtoul(buf, NULL, 10); + + mutex_lock(&data->update_lock); + + reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL); + + if (v) + reg |= FSCHMD_CONTROL_ALERT_LED_MASK; + else + reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; + + i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg); + + data->global_control = reg; + + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sensor_device_attribute fschmd_attr[] = { + SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0), + SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1), + SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2), + SENSOR_ATTR(alert_led, 0644, show_alert_led, store_alert_led, 0), +}; + +static struct sensor_device_attribute fschmd_temp_attr[] = { + SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0), + SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0), + SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0), + SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0), + SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1), + SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1), + SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1), + SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1), + SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2), + SENSOR_ATTR(temp3_max, 0644, show_temp_max, store_temp_max, 2), + SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2), + SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2), + SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3), + SENSOR_ATTR(temp4_max, 0644, show_temp_max, store_temp_max, 3), + SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3), + SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3), + SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4), + SENSOR_ATTR(temp5_max, 0644, show_temp_max, store_temp_max, 4), + SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4), + SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4), +}; + +static struct sensor_device_attribute fschmd_fan_attr[] = { + SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0), + SENSOR_ATTR(fan1_div, 0644, show_fan_div, store_fan_div, 0), + SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0), + SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0), + SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 0), + SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1), + SENSOR_ATTR(fan2_div, 0644, show_fan_div, store_fan_div, 1), + SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1), + SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1), + SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 1), + SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2), + SENSOR_ATTR(fan3_div, 0644, show_fan_div, store_fan_div, 2), + SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2), + SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2), + SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 2), + SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3), + SENSOR_ATTR(fan4_div, 0644, show_fan_div, store_fan_div, 3), + SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3), + SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3), + SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 3), + SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4), + SENSOR_ATTR(fan5_div, 0644, show_fan_div, store_fan_div, 4), + SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4), + SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4), + SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 4), + SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5), + SENSOR_ATTR(fan6_div, 0644, show_fan_div, store_fan_div, 5), + SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5), + SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5), + SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm, + store_pwm_auto_point1_pwm, 5), +}; + + +/* + * Real code + */ + +static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct fschmd_data *data; + u8 revision; + const char * const names[5] = { "Poseidon", "Hermes", "Scylla", + "Heracles", "Heimdall" }; + const char * const client_names[5] = { "fscpos", "fscher", "fscscy", + "fschrc", "fschmd" }; + int i, err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + /* OK. For now, we presume we have a valid client. We now create the + * client structure, even though we cannot fill it completely yet. + * But it allows us to access i2c_smbus_read_byte_data. */ + if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL))) + return -ENOMEM; + + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &fschmd_driver; + mutex_init(&data->update_lock); + + /* Detect & Identify the chip */ + if (kind <= 0) { + char id[4]; + + id[0] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_IDENT_0); + id[1] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_IDENT_1); + id[2] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_IDENT_2); + id[3] = '\0'; + + if (!strcmp(id, "PEG")) + kind = fscpos; + else if (!strcmp(id, "HER")) + kind = fscher; + else if (!strcmp(id, "SCY")) + kind = fscscy; + else if (!strcmp(id, "HRC")) + kind = fschrc; + else if (!strcmp(id, "HMD")) + kind = fschmd; + else + goto exit_free; + } + + if (kind == fscpos) { + /* The Poseidon has hardwired temp limits, fill these + in for the alarm resetting code */ + data->temp_max[0] = 70 + 128; + data->temp_max[1] = 50 + 128; + data->temp_max[2] = 50 + 128; + } + + /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ + data->kind = kind - 1; + strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(client))) + goto exit_free; + + for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) { + err = device_create_file(&client->dev, + &fschmd_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) { + /* Poseidon doesn't have TEMP_LIMIT registers */ + if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show == + show_temp_max) + continue; + + err = device_create_file(&client->dev, + &fschmd_temp_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) { + /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */ + if (kind == fscpos && + !strcmp(fschmd_fan_attr[i].dev_attr.attr.name, + "pwm3_auto_point1_pwm")) + continue; + + err = device_create_file(&client->dev, + &fschmd_fan_attr[i].dev_attr); + if (err) + goto exit_detach; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + data->hwmon_dev = NULL; + goto exit_detach; + } + + revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION); + printk(KERN_INFO FSCHMD_NAME ": Detected FSC %s chip, revision: %d\n", + names[data->kind], (int) revision); + + return 0; + +exit_detach: + fschmd_detach_client(client); /* will also free data for us */ + return err; + +exit_free: + kfree(data); + return err; +} + +static int fschmd_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, fschmd_detect); +} + +static int fschmd_detach_client(struct i2c_client *client) +{ + struct fschmd_data *data = i2c_get_clientdata(client); + int i, err; + + /* Check if registered in case we're called from fschmd_detect + to cleanup after an error */ + if (data->hwmon_dev) + hwmon_device_unregister(data->hwmon_dev); + + for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) + device_remove_file(&client->dev, &fschmd_attr[i].dev_attr); + for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) + device_remove_file(&client->dev, + &fschmd_temp_attr[i].dev_attr); + for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) + device_remove_file(&client->dev, + &fschmd_fan_attr[i].dev_attr); + + if ((err = i2c_detach_client(client))) + return err; + + kfree(data); + return 0; +} + +static struct fschmd_data *fschmd_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct fschmd_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { + + for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) { + data->temp_act[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_TEMP_ACT[data->kind][i]); + data->temp_status[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_TEMP_STATE[data->kind][i]); + + /* The fscpos doesn't have TEMP_LIMIT registers */ + if (FSCHMD_REG_TEMP_LIMIT[data->kind][i]) + data->temp_max[i] = i2c_smbus_read_byte_data( + client, + FSCHMD_REG_TEMP_LIMIT[data->kind][i]); + + /* reset alarm if the alarm condition is gone, + the chip doesn't do this itself */ + if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) == + FSCHMD_TEMP_ALARM_MASK && + data->temp_act[i] < data->temp_max[i]) + i2c_smbus_write_byte_data(client, + FSCHMD_REG_TEMP_STATE[data->kind][i], + FSCHMD_TEMP_ALERT_MASK); + } + + for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) { + data->fan_act[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_ACT[data->kind][i]); + data->fan_status[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_STATE[data->kind][i]); + data->fan_ripple[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_FAN_RIPPLE[data->kind][i]); + + /* The fscpos third fan doesn't have a fan_min */ + if (FSCHMD_REG_FAN_MIN[data->kind][i]) + data->fan_min[i] = i2c_smbus_read_byte_data( + client, + FSCHMD_REG_FAN_MIN[data->kind][i]); + + /* reset fan status if speed is back to > 0 */ + if ((data->fan_status[i] & FSCHMD_FAN_ALARM_MASK) && + data->fan_act[i]) + i2c_smbus_write_byte_data(client, + FSCHMD_REG_FAN_STATE[data->kind][i], + FSCHMD_FAN_ALARM_MASK); + } + + for (i = 0; i < 3; i++) + data->volt[i] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_VOLT[i]); + + data->global_control = i2c_smbus_read_byte_data(client, + FSCHMD_REG_CONTROL); + + /* To be implemented in the future + data->watchdog[0] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_PRESET); + data->watchdog[1] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_STATE); + data->watchdog[2] = i2c_smbus_read_byte_data(client, + FSCHMD_REG_WDOG_CONTROL); */ + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init fschmd_init(void) +{ + return i2c_add_driver(&fschmd_driver); +} + +static void __exit fschmd_exit(void) +{ + i2c_del_driver(&fschmd_driver); +} + +MODULE_AUTHOR("Hans de Goede "); +MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles and " + "Heimdall driver"); +MODULE_LICENSE("GPL"); + +module_init(fschmd_init); +module_exit(fschmd_exit); -- cgit v1.2.3-70-g09d2