From 8199d3a79c224bbe5943fa08684e1f93a17881b0 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 30 Mar 2005 13:34:31 -0800 Subject: [PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang Signed-off-by: Scott Bardone Signed-off-by: Christoph Lameter Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton diff -puN /dev/null Documentation/networking/cxgb.txt --- drivers/net/Kconfig | 19 + drivers/net/Makefile | 1 + drivers/net/chelsio/Makefile | 12 + drivers/net/chelsio/ch_ethtool.h | 102 +++ drivers/net/chelsio/common.h | 269 ++++++ drivers/net/chelsio/cphy.h | 150 ++++ drivers/net/chelsio/cpl5_cmd.h | 145 +++ drivers/net/chelsio/cxgb2.c | 1231 ++++++++++++++++++++++++++ drivers/net/chelsio/cxgb2.h | 122 +++ drivers/net/chelsio/elmer0.h | 157 ++++ drivers/net/chelsio/espi.c | 386 ++++++++ drivers/net/chelsio/espi.h | 67 ++ drivers/net/chelsio/gmac.h | 133 +++ drivers/net/chelsio/mv88x201x.c | 258 ++++++ drivers/net/chelsio/osdep.h | 169 ++++ drivers/net/chelsio/pm3393.c | 831 ++++++++++++++++++ drivers/net/chelsio/regs.h | 453 ++++++++++ drivers/net/chelsio/sge.c | 1451 +++++++++++++++++++++++++++++++ drivers/net/chelsio/sge.h | 79 ++ drivers/net/chelsio/subr.c | 831 ++++++++++++++++++ drivers/net/chelsio/suni1x10gexp_regs.h | 221 +++++ drivers/net/chelsio/tp.c | 188 ++++ drivers/net/chelsio/tp.h | 110 +++ 23 files changed, 7385 insertions(+) create mode 100644 drivers/net/chelsio/Makefile create mode 100644 drivers/net/chelsio/ch_ethtool.h create mode 100644 drivers/net/chelsio/common.h create mode 100644 drivers/net/chelsio/cphy.h create mode 100644 drivers/net/chelsio/cpl5_cmd.h create mode 100644 drivers/net/chelsio/cxgb2.c create mode 100644 drivers/net/chelsio/cxgb2.h create mode 100644 drivers/net/chelsio/elmer0.h create mode 100644 drivers/net/chelsio/espi.c create mode 100644 drivers/net/chelsio/espi.h create mode 100644 drivers/net/chelsio/gmac.h create mode 100644 drivers/net/chelsio/mv88x201x.c create mode 100644 drivers/net/chelsio/osdep.h create mode 100644 drivers/net/chelsio/pm3393.c create mode 100644 drivers/net/chelsio/regs.h create mode 100644 drivers/net/chelsio/sge.c create mode 100644 drivers/net/chelsio/sge.h create mode 100644 drivers/net/chelsio/subr.c create mode 100644 drivers/net/chelsio/suni1x10gexp_regs.h create mode 100644 drivers/net/chelsio/tp.c create mode 100644 drivers/net/chelsio/tp.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..8a7928f1d57 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2080,6 +2080,25 @@ endmenu menu "Ethernet (10000 Mbit)" depends on NETDEVICES && !UML +config CHELSIO_T1 + tristate "Chelsio 10Gb Ethernet support" + depends on PCI + help + This driver supports Chelsio N110 and N210 models 10Gb Ethernet + cards. More information about adapter features and performance + tuning is in . + + For general information about Chelsio and our products, visit + our website at . + + For customer support, please visit our customer support page at + . + + Please send feedback to . + + To compile this driver as a module, choose M here: the module + will be called cxgb. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..1992166ffba 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -9,6 +9,7 @@ endif obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IXGB) += ixgb/ +obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile new file mode 100644 index 00000000000..ff8c11b3a4e --- /dev/null +++ b/drivers/net/chelsio/Makefile @@ -0,0 +1,12 @@ +# +# Chelsio 10Gb NIC driver for Linux. +# + +obj-$(CONFIG_CHELSIO_T1) += cxgb.o + +EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) + + +cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o + + diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h new file mode 100644 index 00000000000..c523d24836b --- /dev/null +++ b/drivers/net/chelsio/ch_ethtool.h @@ -0,0 +1,102 @@ +/***************************************************************************** + * * + * File: ch_ethtool.h * + * $Revision: 1.5 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CHETHTOOL_LINUX_H__ +#define __CHETHTOOL_LINUX_H__ + +/* TCB size in 32-bit words */ +#define TCB_WORDS (TCB_SIZE / 4) + +enum { + ETHTOOL_SETREG, + ETHTOOL_GETREG, + ETHTOOL_SETTPI, + ETHTOOL_GETTPI, + ETHTOOL_DEVUP, + ETHTOOL_GETMTUTAB, + ETHTOOL_SETMTUTAB, + ETHTOOL_GETMTU, + ETHTOOL_SET_PM, + ETHTOOL_GET_PM, + ETHTOOL_GET_TCAM, + ETHTOOL_SET_TCAM, + ETHTOOL_GET_TCB, + ETHTOOL_READ_TCAM_WORD, +}; + +struct ethtool_reg { + uint32_t cmd; + uint32_t addr; + uint32_t val; +}; + +struct ethtool_mtus { + uint32_t cmd; + uint16_t mtus[NMTUS]; +}; + +struct ethtool_pm { + uint32_t cmd; + uint32_t tx_pg_sz; + uint32_t tx_num_pg; + uint32_t rx_pg_sz; + uint32_t rx_num_pg; + uint32_t pm_total; +}; + +struct ethtool_tcam { + uint32_t cmd; + uint32_t tcam_size; + uint32_t nservers; + uint32_t nroutes; +}; + +struct ethtool_tcb { + uint32_t cmd; + uint32_t tcb_index; + uint32_t tcb_data[TCB_WORDS]; +}; + +struct ethtool_tcam_word { + uint32_t cmd; + uint32_t addr; + uint32_t buf[3]; +}; + +#define SIOCCHETHTOOL SIOCDEVPRIVATE +#endif diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h new file mode 100644 index 00000000000..017684ff48d --- /dev/null +++ b/drivers/net/chelsio/common.h @@ -0,0 +1,269 @@ +/***************************************************************************** + * * + * File: common.h * + * $Revision: 1.5 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_COMMON_H +#define CHELSIO_COMMON_H + +#define DIMOF(x) (sizeof(x)/sizeof(x[0])) + +#define NMTUS 8 +#define MAX_NPORTS 4 +#define TCB_SIZE 128 + +enum { + CHBT_BOARD_7500, + CHBT_BOARD_8000, + CHBT_BOARD_CHT101, + CHBT_BOARD_CHT110, + CHBT_BOARD_CHT210, + CHBT_BOARD_CHT204, + CHBT_BOARD_N110, + CHBT_BOARD_N210, + CHBT_BOARD_COUGAR, + CHBT_BOARD_6800, + CHBT_BOARD_SIMUL +}; + +enum { + CHBT_TERM_FPGA, + CHBT_TERM_T1, + CHBT_TERM_T2, + CHBT_TERM_T3 +}; + +enum { + CHBT_MAC_CHELSIO_A, + CHBT_MAC_IXF1010, + CHBT_MAC_PM3393, + CHBT_MAC_VSC7321, + CHBT_MAC_DUMMY +}; + +enum { + CHBT_PHY_88E1041, + CHBT_PHY_88E1111, + CHBT_PHY_88X2010, + CHBT_PHY_XPAK, + CHBT_PHY_MY3126, + CHBT_PHY_DUMMY +}; + +enum { + PAUSE_RX = 1, + PAUSE_TX = 2, + PAUSE_AUTONEG = 4 +}; + +/* Revisions of T1 chip */ +#define TERM_T1A 0 +#define TERM_T1B 1 +#define TERM_T2 3 + +struct tp_params { + unsigned int pm_size; + unsigned int cm_size; + unsigned int pm_rx_base; + unsigned int pm_tx_base; + unsigned int pm_rx_pg_size; + unsigned int pm_tx_pg_size; + unsigned int pm_rx_num_pgs; + unsigned int pm_tx_num_pgs; + unsigned int use_5tuple_mode; +}; + +struct sge_params { + unsigned int cmdQ_size[2]; + unsigned int freelQ_size[2]; + unsigned int large_buf_capacity; + unsigned int rx_coalesce_usecs; + unsigned int last_rx_coalesce_raw; + unsigned int default_rx_coalesce_usecs; + unsigned int sample_interval_usecs; + unsigned int coalesce_enable; + unsigned int polling; +}; + +struct mc5_params { + unsigned int mode; /* selects MC5 width */ + unsigned int nservers; /* size of server region */ + unsigned int nroutes; /* size of routing region */ +}; + +/* Default MC5 region sizes */ +#define DEFAULT_SERVER_REGION_LEN 256 +#define DEFAULT_RT_REGION_LEN 1024 + +struct pci_params { + unsigned short speed; + unsigned char width; + unsigned char is_pcix; +}; + +struct adapter_params { + struct sge_params sge; + struct mc5_params mc5; + struct tp_params tp; + struct pci_params pci; + + const struct board_info *brd_info; + + unsigned short mtus[NMTUS]; + unsigned int nports; /* # of ethernet ports */ + unsigned int stats_update_period; + unsigned short chip_revision; + unsigned char chip_version; + unsigned char is_asic; +}; + +struct pci_err_cnt { + unsigned int master_parity_err; + unsigned int sig_target_abort; + unsigned int rcv_target_abort; + unsigned int rcv_master_abort; + unsigned int sig_sys_err; + unsigned int det_parity_err; + unsigned int pio_parity_err; + unsigned int wf_parity_err; + unsigned int rf_parity_err; + unsigned int cf_parity_err; +}; + +struct link_config { + unsigned int supported; /* link capabilities */ + unsigned int advertising; /* advertised capabilities */ + unsigned short requested_speed; /* speed user has requested */ + unsigned short speed; /* actual link speed */ + unsigned char requested_duplex; /* duplex user has requested */ + unsigned char duplex; /* actual link duplex */ + unsigned char requested_fc; /* flow control user has requested */ + unsigned char fc; /* actual link flow control */ + unsigned char autoneg; /* autonegotiating? */ +}; + +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff + +struct mdio_ops; +struct gmac; +struct gphy; + +struct board_info { + unsigned char board; + unsigned char port_number; + unsigned long caps; + unsigned char chip_term; + unsigned char chip_mac; + unsigned char chip_phy; + unsigned int clock_core; + unsigned int clock_mc3; + unsigned int clock_mc4; + unsigned int espi_nports; + unsigned int clock_cspi; + unsigned int clock_elmer0; + unsigned char mdio_mdien; + unsigned char mdio_mdiinv; + unsigned char mdio_mdc; + unsigned char mdio_phybaseaddr; + struct gmac *gmac; + struct gphy *gphy; + struct mdio_ops *mdio_ops; + const char *desc; +}; + +#include "osdep.h" + +#ifndef PCI_VENDOR_ID_CHELSIO +#define PCI_VENDOR_ID_CHELSIO 0x1425 +#endif + +extern struct pci_device_id t1_pci_tbl[]; + +static inline int t1_is_asic(const adapter_t *adapter) +{ + return adapter->params.is_asic; +} + +static inline int adapter_matches_type(const adapter_t *adapter, + int version, int revision) +{ + return adapter->params.chip_version == version && + adapter->params.chip_revision == revision; +} + +#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B) +#define is_T2(adap) adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2) + +/* Returns true if an adapter supports VLAN acceleration and TSO */ +static inline int vlan_tso_capable(const adapter_t *adapter) +{ + return !t1_is_T1B(adapter); +} + +#define for_each_port(adapter, iter) \ + for (iter = 0; iter < (adapter)->params.nports; ++iter) + +#define board_info(adapter) ((adapter)->params.brd_info) +#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full) + +static inline unsigned int core_ticks_per_usec(const adapter_t *adap) +{ + return board_info(adap)->clock_core / 1000000; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); + +void t1_interrupts_enable(adapter_t *adapter); +void t1_interrupts_disable(adapter_t *adapter); +void t1_interrupts_clear(adapter_t *adapter); +int elmer0_ext_intr_handler(adapter_t *adapter); +int t1_slow_intr_handler(adapter_t *adapter); + +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +const struct board_info *t1_get_board_info(unsigned int board_id); +const struct board_info *t1_get_board_info_from_ids(unsigned int devid, + unsigned short ssid); +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p); +int t1_init_hw_modules(adapter_t *adapter); +int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +void t1_free_sw_modules(adapter_t *adapter); +void t1_fatal_err(adapter_t *adapter); +#endif + diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h new file mode 100644 index 00000000000..1bc2248264c --- /dev/null +++ b/drivers/net/chelsio/cphy.h @@ -0,0 +1,150 @@ +/***************************************************************************** + * * + * File: cphy.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_CPHY_H +#define CHELSIO_CPHY_H + +#include "common.h" + +struct mdio_ops { + void (*init)(adapter_t *adapter, const struct board_info *bi); + int (*read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); +}; + +/* PHY interrupt types */ +enum { + cphy_cause_link_change = 0x1, + cphy_cause_error = 0x2 +}; + +struct cphy; + +/* PHY operations */ +struct cphy_ops { + void (*destroy)(struct cphy *); + int (*reset)(struct cphy *, int wait); + + int (*interrupt_enable)(struct cphy *); + int (*interrupt_disable)(struct cphy *); + int (*interrupt_clear)(struct cphy *); + int (*interrupt_handler)(struct cphy *); + + int (*autoneg_enable)(struct cphy *); + int (*autoneg_disable)(struct cphy *); + int (*autoneg_restart)(struct cphy *); + + int (*advertise)(struct cphy *phy, unsigned int advertise_map); + int (*set_loopback)(struct cphy *, int on); + int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex); + int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed, + int *duplex, int *fc); +}; + +/* A PHY instance */ +struct cphy { + int addr; /* PHY address */ + adapter_t *adapter; /* associated adapter */ + struct cphy_ops *ops; /* PHY operations */ + int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *val); + int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val); + struct cphy_instance *instance; +}; + +/* Convenience MDIO read/write wrappers */ +static inline int mdio_read(struct cphy *cphy, int mmd, int reg, + unsigned int *valp) +{ + return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp); +} + +static inline int mdio_write(struct cphy *cphy, int mmd, int reg, + unsigned int val) +{ + return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val); +} + +static inline int simple_mdio_read(struct cphy *cphy, int reg, + unsigned int *valp) +{ + return mdio_read(cphy, 0, reg, valp); +} + +static inline int simple_mdio_write(struct cphy *cphy, int reg, + unsigned int val) +{ + return mdio_write(cphy, 0, reg, val); +} + +/* Convenience initializer */ +static inline void cphy_init(struct cphy *phy, adapter_t *adapter, + int phy_addr, struct cphy_ops *phy_ops, + struct mdio_ops *mdio_ops) +{ + phy->adapter = adapter; + phy->addr = phy_addr; + phy->ops = phy_ops; + if (mdio_ops) { + phy->mdio_read = mdio_ops->read; + phy->mdio_write = mdio_ops->write; + } +} + +/* Operations of the PHY-instance factory */ +struct gphy { + /* Construct a PHY instance with the given PHY address */ + struct cphy *(*create)(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops); + + /* + * Reset the PHY chip. This resets the whole PHY chip, not individual + * ports. + */ + int (*reset)(adapter_t *adapter); +}; + +extern struct gphy t1_my3126_ops; +extern struct gphy t1_mv88e1xxx_ops; +extern struct gphy t1_xpak_ops; +extern struct gphy t1_mv88x201x_ops; +extern struct gphy t1_dummy_phy_ops; +#endif diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h new file mode 100644 index 00000000000..45e9248979f --- /dev/null +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -0,0 +1,145 @@ +/***************************************************************************** + * * + * File: cpl5_cmd.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CPL5_CMD_H +#define _CPL5_CMD_H + +#include + +#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD) +#error "Adjust your defines" +#endif + +enum CPL_opcode { + CPL_RX_PKT = 0xAD, + CPL_TX_PKT = 0xB2, + CPL_TX_PKT_LSO = 0xB6, +}; + +enum { /* TX_PKT_LSO ethernet types */ + CPL_ETH_II, + CPL_ETH_II_VLAN, + CPL_ETH_802_3, + CPL_ETH_802_3_VLAN +}; + +struct cpl_rx_data { + __u32 rsvd0; + __u32 len; + __u32 seq; + __u16 urg; + __u8 rsvd1; + __u8 status; +}; + +/* + * We want this header's alignment to be no more stringent than 2-byte aligned. + * All fields are u8 or u16 except for the length. However that field is not + * used so we break it into 2 16-bit parts to easily meet our alignment needs. + */ +struct cpl_tx_pkt { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 ip_csum_dis:1; + __u8 l4_csum_dis:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 l4_csum_dis:1; + __u8 ip_csum_dis:1; + __u8 iff:4; +#endif + __u16 vlan; + __u16 len_hi; + __u16 len_lo; +}; + +struct cpl_tx_pkt_lso { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 ip_csum_dis:1; + __u8 l4_csum_dis:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 l4_csum_dis:1; + __u8 ip_csum_dis:1; + __u8 iff:4; +#endif + __u16 vlan; + __u32 len; + + __u32 rsvd2; + __u8 rsvd3; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 tcp_hdr_words:4; + __u8 ip_hdr_words:4; +#else + __u8 ip_hdr_words:4; + __u8 tcp_hdr_words:4; +#endif + __u16 eth_type_mss; +}; + +struct cpl_rx_pkt { + __u8 opcode; +#if defined(__LITTLE_ENDIAN_BITFIELD) + __u8 iff:4; + __u8 csum_valid:1; + __u8 bad_pkt:1; + __u8 vlan_valid:1; + __u8 rsvd:1; +#else + __u8 rsvd:1; + __u8 vlan_valid:1; + __u8 bad_pkt:1; + __u8 csum_valid:1; + __u8 iff:4; +#endif + __u16 csum; + __u16 vlan; + __u16 len; +}; + +#endif diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c new file mode 100644 index 00000000000..48c4d5acfcd --- /dev/null +++ b/drivers/net/chelsio/cxgb2.c @@ -0,0 +1,1231 @@ +/***************************************************************************** + * * + * File: cxgb2.c * + * $Revision: 1.11 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ch_ethtool.h" +#include "cpl5_cmd.h" +#include "regs.h" +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "tp.h" +#include "espi.h" + +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} + +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} + +#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64) +# define FMT64 "l" +#else +# define FMT64 "ll" +#endif + +# define DRV_TYPE "" +# define MODULE_DESC "Chelsio Network Driver" + +static char driver_name[] = DRV_NAME; +static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver"; +static char driver_version[] = "2.1.0"; + +#define PCI_DMA_64BIT ~0ULL +#define PCI_DMA_32BIT 0xffffffffULL + +#define MAX_CMDQ_ENTRIES 16384 +#define MAX_CMDQ1_ENTRIES 1024 +#define MAX_RX_BUFFERS 16384 +#define MAX_RX_JUMBO_BUFFERS 16384 +#define MAX_TX_BUFFERS_HIGH 16384U +#define MAX_TX_BUFFERS_LOW 1536U +#define MIN_FL_ENTRIES 32 + +#define PORT_MASK ((1 << MAX_NPORTS) - 1) + +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +/* + * The EEPROM is actually bigger but only the first few bytes are used so we + * only report those. + */ +#define EEPROM_SIZE 32 + +MODULE_DESCRIPTION(MODULE_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +MODULE_PARM(dflt_msg_enable, "i"); +MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap"); + + +static const char pci_speed[][4] = { + "33", "66", "100", "133" +}; + +/* + * Setup MAC to receive the types of packets we want. + */ +static void t1_set_rxmode(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct t1_rx_mode rm; + + rm.dev = dev; + rm.idx = 0; + rm.list = dev->mc_list; + mac->ops->set_rx_mode(mac, &rm); +} + +static void link_report(struct port_info *p) +{ + if (!netif_carrier_ok(p->dev)) + printk(KERN_INFO "%s: link is down\n", p->dev->name); + else { + const char *s = "10 Mbps"; + + switch (p->link_config.speed) { + case SPEED_10000: s = "10 Gbps"; break; + case SPEED_1000: s = "1000 Mbps"; break; + case SPEED_100: s = "100 Mbps"; break; + } + + printk(KERN_INFO "%s: link is up at %s, %s duplex\n", + p->dev->name, s, + p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); + } +} + +void t1_link_changed(struct adapter *adapter, int port_id, int link_stat, + int speed, int duplex, int pause) +{ + struct port_info *p = &adapter->port[port_id]; + + if (link_stat != netif_carrier_ok(p->dev)) { + if (link_stat) + netif_carrier_on(p->dev); + else + netif_carrier_off(p->dev); + link_report(p); + + } +} + +static void link_start(struct port_info *p) +{ + struct cmac *mac = p->mac; + + mac->ops->reset(mac); + if (mac->ops->macaddress_set) + mac->ops->macaddress_set(mac, p->dev->dev_addr); + t1_set_rxmode(p->dev); + t1_link_start(p->phy, mac, &p->link_config); + mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); +} + +static void enable_hw_csum(struct adapter *adapter) +{ + if (adapter->flags & TSO_CAPABLE) + t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ + if (adapter->flags & UDP_CSUM_CAPABLE) + t1_tp_set_udp_checksum_offload(adapter->tp, 1); + t1_tp_set_tcp_checksum_offload(adapter->tp, 1); +} + +/* + * Things to do upon first use of a card. + * This must run with the rtnl lock held. + */ +static int cxgb_up(struct adapter *adapter) +{ + int err = 0; + + if (!(adapter->flags & FULL_INIT_DONE)) { + err = t1_init_hw_modules(adapter); + if (err) + goto out_err; + + enable_hw_csum(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + t1_interrupts_clear(adapter); + + if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ, + adapter->name, adapter))) + goto out_err; + + t1_sge_start(adapter->sge); + t1_interrupts_enable(adapter); + + err = 0; + out_err: + return err; +} + +/* + * Release resources when all the ports have been stopped. + */ +static void cxgb_down(struct adapter *adapter) +{ + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + free_irq(adapter->pdev->irq, adapter); +} + +static int cxgb_open(struct net_device *dev) +{ + int err; + struct adapter *adapter = dev->priv; + int other_ports = adapter->open_device_map & PORT_MASK; + + if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) + return err; + + __set_bit(dev->if_port, &adapter->open_device_map); + link_start(&adapter->port[dev->if_port]); + netif_start_queue(dev); + if (!other_ports && adapter->params.stats_update_period) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + return 0; +} + +static int cxgb_close(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct cmac *mac = p->mac; + + netif_stop_queue(dev); + mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX); + netif_carrier_off(dev); + + clear_bit(dev->if_port, &adapter->open_device_map); + if (adapter->params.stats_update_period && + !(adapter->open_device_map & PORT_MASK)) { + /* Stop statistics accumulation. */ + smp_mb__after_clear_bit(); + spin_lock(&adapter->work_lock); /* sync with update task */ + spin_unlock(&adapter->work_lock); + cancel_mac_stats_update(adapter); + } + + if (!adapter->open_device_map) + cxgb_down(adapter); + return 0; +} + +static struct net_device_stats *t1_get_stats(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct net_device_stats *ns = &p->netstats; + const struct cmac_statistics *pstats; + + /* Do a full update of the MAC stats */ + pstats = p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FULL); + + ns->tx_packets = pstats->TxUnicastFramesOK + + pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK; + + ns->rx_packets = pstats->RxUnicastFramesOK + + pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK; + + ns->tx_bytes = pstats->TxOctetsOK; + ns->rx_bytes = pstats->RxOctetsOK; + + ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors + + pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions; + ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors + + pstats->RxFCSErrors + pstats->RxAlignErrors + + pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors + + pstats->RxSymbolErrors + pstats->RxRuntErrors; + + ns->multicast = pstats->RxMulticastFramesOK; + ns->collisions = pstats->TxTotalCollisions; + + /* detailed rx_errors */ + ns->rx_length_errors = pstats->RxFrameTooLongErrors + + pstats->RxJabberErrors; + ns->rx_over_errors = 0; + ns->rx_crc_errors = pstats->RxFCSErrors; + ns->rx_frame_errors = pstats->RxAlignErrors; + ns->rx_fifo_errors = 0; + ns->rx_missed_errors = 0; + + /* detailed tx_errors */ + ns->tx_aborted_errors = pstats->TxFramesAbortedDueToXSCollisions; + ns->tx_carrier_errors = 0; + ns->tx_fifo_errors = pstats->TxUnderrun; + ns->tx_heartbeat_errors = 0; + ns->tx_window_errors = pstats->TxLateCollisions; + return ns; +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return adapter->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct adapter *adapter = dev->priv; + + adapter->msg_enable = val; +} + +static char stats_strings[][ETH_GSTRING_LEN] = { + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors" +}; + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct adapter *adapter = dev->priv; + + strcpy(info->driver, driver_name); + strcpy(info->version, driver_version); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(adapter->pdev)); +} + +static int get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(stats_strings); +} + +static void get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, stats_strings, sizeof(stats_strings)); +} + +static void get_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + const struct cmac_statistics *s; + + s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + cmd->supported = p->link_config.supported; + cmd->advertising = p->link_config.advertising; + + if (netif_carrier_ok(dev)) { + cmd->speed = p->link_config.speed; + cmd->duplex = p->link_config.duplex; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static int speed_duplex_to_caps(int speed, int duplex) +{ + int cap = 0; + + switch (speed) { + case SPEED_10: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10baseT_Full; + else + cap = SUPPORTED_10baseT_Half; + break; + case SPEED_100: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_100baseT_Full; + else + cap = SUPPORTED_100baseT_Half; + break; + case SPEED_1000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_1000baseT_Full; + else + cap = SUPPORTED_1000baseT_Half; + break; + case SPEED_10000: + if (duplex == DUPLEX_FULL) + cap = SUPPORTED_10000baseT_Full; + } + return cap; +} + +#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \ + ADVERTISED_10000baseT_Full) + +static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (!(lc->supported & SUPPORTED_Autoneg)) + return -EOPNOTSUPP; /* can't change speed/duplex */ + + if (cmd->autoneg == AUTONEG_DISABLE) { + int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); + + if (!(lc->supported & cap) || cmd->speed == SPEED_1000) + return -EINVAL; + lc->requested_speed = cmd->speed; + lc->requested_duplex = cmd->duplex; + lc->advertising = 0; + } else { + cmd->advertising &= ADVERTISED_MASK; + if (cmd->advertising & (cmd->advertising - 1)) + cmd->advertising = lc->supported; + cmd->advertising &= lc->supported; + if (!cmd->advertising) + return -EINVAL; + lc->requested_speed = SPEED_INVALID; + lc->requested_duplex = DUPLEX_INVALID; + lc->advertising = cmd->advertising | ADVERTISED_Autoneg; + } + lc->autoneg = cmd->autoneg; + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + return 0; +} + +static void get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + + epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0; + epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0; + epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0; +} + +static int set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *epause) +{ + struct adapter *adapter = dev->priv; + struct port_info *p = &adapter->port[dev->if_port]; + struct link_config *lc = &p->link_config; + + if (epause->autoneg == AUTONEG_DISABLE) + lc->requested_fc = 0; + else if (lc->supported & SUPPORTED_Autoneg) + lc->requested_fc = PAUSE_AUTONEG; + else + return -EINVAL; + + if (epause->rx_pause) + lc->requested_fc |= PAUSE_RX; + if (epause->tx_pause) + lc->requested_fc |= PAUSE_TX; + if (lc->autoneg == AUTONEG_ENABLE) { + if (netif_running(dev)) + t1_link_start(p->phy, p->mac, lc); + } else { + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + if (netif_running(dev)) + p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1, + lc->fc); + } + return 0; +} + +static u32 get_rx_csum(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return (adapter->flags & RX_CSUM_ENABLED) != 0; +} + +static int set_rx_csum(struct net_device *dev, u32 data) +{ + struct adapter *adapter = dev->priv; + + if (data) + adapter->flags |= RX_CSUM_ENABLED; + else + adapter->flags &= ~RX_CSUM_ENABLED; + return 0; +} + +static int set_tso(struct net_device *dev, u32 value) +{ + struct adapter *adapter = dev->priv; + + if (!(adapter->flags & TSO_CAPABLE)) + return value ? -EOPNOTSUPP : 0; + return ethtool_op_set_tso(dev, value); +} + +static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + e->rx_max_pending = MAX_RX_BUFFERS; + e->rx_mini_max_pending = 0; + e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS; + e->tx_max_pending = MAX_CMDQ_ENTRIES; + + e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl]; + e->rx_mini_pending = 0; + e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl]; + e->tx_pending = adapter->params.sge.cmdQ_size[0]; +} + +static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) +{ + struct adapter *adapter = dev->priv; + int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending || + e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS || + e->tx_pending > MAX_CMDQ_ENTRIES || + e->rx_pending < MIN_FL_ENTRIES || + e->rx_jumbo_pending < MIN_FL_ENTRIES || + e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1)) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; + adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; + adapter->params.sge.cmdQ_size[0] = e->tx_pending; + adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ? + MAX_CMDQ1_ENTRIES : e->tx_pending; + return 0; +} + +static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + unsigned int sge_coalesce_usecs = 0; + + sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; + sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; + if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) && + (c->rx_coalesce_usecs == sge_coalesce_usecs) ) { + adapter->params.sge.rx_coalesce_usecs = + adapter->params.sge.default_rx_coalesce_usecs; + } else { + adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; + } + + adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs; + adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000); + adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; + t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); + return 0; +} + +static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) +{ + struct adapter *adapter = dev->priv; + + if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */ + c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; + c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; + } else { + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; + } + c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; + c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; + return 0; +} + +static int get_eeprom_len(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + return t1_is_asic(adapter) ? EEPROM_SIZE : 0; +} + +#define EEPROM_MAGIC(ap) \ + (PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16)) + +static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, + u8 *data) +{ + int i; + u8 buf[EEPROM_SIZE] __attribute__((aligned(4))); + struct adapter *adapter = dev->priv; + + e->magic = EEPROM_MAGIC(adapter); + for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32)) + t1_seeprom_read(adapter, i, (u32 *)&buf[i]); + memcpy(data, buf + e->offset, e->len); + return 0; +} + +static struct ethtool_ops t1_ethtool_ops = { + .get_settings = get_settings, + .set_settings = set_settings, + .get_drvinfo = get_drvinfo, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_ringparam = get_sge_param, + .set_ringparam = set_sge_param, + .get_coalesce = get_coalesce, + .set_coalesce = set_coalesce, + .get_eeprom_len = get_eeprom_len, + .get_eeprom = get_eeprom, + .get_pauseparam = get_pauseparam, + .set_pauseparam = set_pauseparam, + .get_rx_csum = get_rx_csum, + .set_rx_csum = set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = get_strings, + .get_stats_count = get_stats_count, + .get_ethtool_stats = get_stats, + .get_tso = ethtool_op_get_tso, + .set_tso = set_tso, +}; + +static int ethtool_ioctl(struct net_device *dev, void *useraddr) +{ + u32 cmd; + struct adapter *adapter = dev->priv; + + if (copy_from_user(&cmd, useraddr, sizeof(cmd))) + return -EFAULT; + + switch (cmd) { + case ETHTOOL_SETREG: { + struct ethtool_reg edata; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) + return -EINVAL; + if (edata.addr == A_ESPI_MISC_CONTROL) + t1_espi_set_misc_ctrl(adapter, edata.val); + else { + if (edata.addr == 0x950) + t1_sge_set_ptimeout(adapter, edata.val); + else + writel(edata.val, adapter->regs + edata.addr); + } + break; + } + case ETHTOOL_GETREG: { + struct ethtool_reg edata; + + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) + return -EINVAL; + if (edata.addr >= 0x900 && edata.addr <= 0x93c) + edata.val = t1_espi_get_mon(adapter, edata.addr, 1); + else { + if (edata.addr == 0x950) + edata.val = t1_sge_get_ptimeout(adapter); + else + edata.val = readl(adapter->regs + edata.addr); + } + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + case ETHTOOL_SETTPI: { + struct ethtool_reg edata; + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0) + return -EINVAL; + t1_tpi_write(adapter, edata.addr, edata.val); + break; + } + case ETHTOOL_GETTPI: { + struct ethtool_reg edata; + + if (copy_from_user(&edata, useraddr, sizeof(edata))) + return -EFAULT; + if ((edata.addr & 3) != 0) + return -EINVAL; + t1_tpi_read(adapter, edata.addr, &edata.val); + if (copy_to_user(useraddr, &edata, sizeof(edata))) + return -EFAULT; + break; + } + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + u32 val; + + if (!phy->mdio_read) return -EOPNOTSUPP; + phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, + &val); + data->val_out = val; + break; + } + case SIOCSMIIREG: { + struct cphy *phy = adapter->port[dev->if_port].phy; + + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (!phy->mdio_write) return -EOPNOTSUPP; + phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, + data->val_in); + break; + } + + case SIOCCHETHTOOL: + return ethtool_ioctl(dev, (void *)req->ifr_data); + default: + return -EOPNOTSUPP; + } + return 0; +} + +static int t1_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + + if (!mac->ops->set_mtu) + return -EOPNOTSUPP; + if (new_mtu < 68) + return -EINVAL; + if ((ret = mac->ops->set_mtu(mac, new_mtu))) + return ret; + dev->mtu = new_mtu; + return 0; +} + +static int t1_set_mac_addr(struct net_device *dev, void *p) +{ + struct adapter *adapter = dev->priv; + struct cmac *mac = adapter->port[dev->if_port].mac; + struct sockaddr *addr = p; + + if (!mac->ops->macaddress_set) + return -EOPNOTSUPP; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + mac->ops->macaddress_set(mac, dev->dev_addr); + return 0; +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +static void vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + adapter->vlan_grp = grp; + t1_set_vlan_accel(adapter, grp != NULL); + spin_unlock_irq(&adapter->async_lock); +} + +static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct adapter *adapter = dev->priv; + + spin_lock_irq(&adapter->async_lock); + if (adapter->vlan_grp) + adapter->vlan_grp->vlan_devices[vid] = NULL; + spin_unlock_irq(&adapter->async_lock); +} +#endif + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void t1_netpoll(struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + + t1_interrupt(adapter->pdev->irq, adapter, NULL); +} +#endif + +/* + * Periodic accumulation of MAC statistics. This is used only if the MAC + * does not have any other way to prevent stats counter overflow. + */ +static void mac_stats_task(void *data) +{ + int i; + struct adapter *adapter = data; + + for_each_port(adapter, i) { + struct port_info *p = &adapter->port[i]; + + if (netif_running(p->dev)) + p->mac->ops->statistics_update(p->mac, + MAC_STATS_UPDATE_FAST); + } + + /* Schedule the next statistics update if any port is active. */ + spin_lock(&adapter->work_lock); + if (adapter->open_device_map & PORT_MASK) + schedule_mac_stats_update(adapter, + adapter->params.stats_update_period); + spin_unlock(&adapter->work_lock); +} + +/* + * Processes elmer0 external interrupts in process context. + */ +static void ext_intr_task(void *data) +{ + u32 enable; + struct adapter *adapter = data; + + elmer0_ext_intr_handler(adapter); + + /* Now reenable external interrupts */ + t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT); + enable = t1_read_reg_4(adapter, A_PL_ENABLE); + t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT); + adapter->slow_intr_mask |= F_PL_INTR_EXT; +} + +/* + * Interrupt-context handler for elmer0 external interrupts. + */ +void t1_elmer0_ext_intr(struct adapter *adapter) +{ + u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE); + + /* + * Schedule a task to handle external interrupts as we require + * a process context. We disable EXT interrupts in the interim + * and let the task reenable them when it's done. + */ + adapter->slow_intr_mask &= ~F_PL_INTR_EXT; + t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT); + schedule_work(&adapter->ext_intr_handler_task); +} + +void t1_fatal_err(struct adapter *adapter) +{ + if (adapter->flags & FULL_INIT_DONE) { + t1_sge_stop(adapter->sge); + t1_interrupts_disable(adapter); + } + CH_ALERT("%s: encountered fatal error, operation suspended\n", + adapter->name); +} + + +static int __devinit init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int i, err, pci_using_dac = 0; + unsigned long mmio_start, mmio_len; + const struct board_info *bi; + struct adapter *adapter = NULL; + struct port_info *pi; + + if (!version_printed) { + printk(KERN_INFO "%s - version %s\n", driver_string, + driver_version); + ++version_printed; + } + + err = pci_enable_device(pdev); + if (err) + return err; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + CH_ERR("%s: cannot find PCI device memory base address\n", + pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + + if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) { + pci_using_dac = 1; + if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) { + CH_ERR("%s: unable to obtain 64-bit DMA for" + "consistent allocations\n", pci_name(pdev)); + err = -ENODEV; + goto out_disable_pdev; + } + } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) { + CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); + goto out_disable_pdev; + } + + err = pci_request_regions(pdev, driver_name); + if (err) { + CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); + goto out_disable_pdev; + } + + pci_set_master(pdev); + + mmio_start = pci_resource_start(pdev, 0); + mmio_len = pci_resource_len(pdev, 0); + bi = t1_get_board_info(ent->driver_data); + + for (i = 0; i < bi->port_number; ++i) { + struct net_device *netdev; + + netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter)); + if (!netdev) { + err = -ENOMEM; + goto out_free_dev; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + if (!adapter) { + adapter = netdev->priv; + adapter->pdev = pdev; + adapter->port[0].dev = netdev; /* so we don't leak it */ + + adapter->regs = ioremap(mmio_start, mmio_len); + if (!adapter->regs) { + CH_ERR("%s: cannot map device registers\n", + pci_name(pdev)); + err = -ENOMEM; + goto out_free_dev; + } + + if (t1_get_board_rev(adapter, bi, &adapter->params)) { + err = -ENODEV; /* Can't handle this chip rev */ + goto out_free_dev; + } + + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + adapter->mmio_len = mmio_len; + + init_MUTEX(&adapter->mib_mutex); + spin_lock_init(&adapter->tpi_lock); + spin_lock_init(&adapter->work_lock); + spin_lock_init(&adapter->async_lock); + + INIT_WORK(&adapter->ext_intr_handler_task, + ext_intr_task, adapter); + INIT_WORK(&adapter->stats_update_task, mac_stats_task, + adapter); + + pci_set_drvdata(pdev, netdev); + + } + + pi = &adapter->port[i]; + pi->dev = netdev; + netif_carrier_off(netdev); + netdev->irq = pdev->irq; + netdev->if_port = i; + netdev->mem_start = mmio_start; + netdev->mem_end = mmio_start + mmio_len - 1; + netdev->priv = adapter; + netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + if (vlan_tso_capable(adapter)) { + adapter->flags |= UDP_CSUM_CAPABLE; +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + adapter->flags |= VLAN_ACCEL_CAPABLE; + netdev->features |= + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + netdev->vlan_rx_register = vlan_rx_register; + netdev->vlan_rx_kill_vid = vlan_rx_kill_vid; +#endif + adapter->flags |= TSO_CAPABLE; + netdev->features |= NETIF_F_TSO; + } + + netdev->open = cxgb_open; + netdev->stop = cxgb_close; + netdev->hard_start_xmit = t1_start_xmit; + netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ? + sizeof(struct cpl_tx_pkt_lso) : + sizeof(struct cpl_tx_pkt); + netdev->get_stats = t1_get_stats; + netdev->set_multicast_list = t1_set_rxmode; + netdev->do_ioctl = t1_ioctl; + netdev->change_mtu = t1_change_mtu; + netdev->set_mac_address = t1_set_mac_addr; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = t1_netpoll; +#endif + netdev->weight = 64; + + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + } + + if (t1_init_sw_modules(adapter, bi) < 0) { + err = -ENODEV; + goto out_free_dev; + } + + /* + * The card is now ready to go. If any errors occur during device + * registration we do not fail the whole card but rather proceed only + * with the ports we manage to register successfully. However we must + * register at least one net device. + */ + for (i = 0; i < bi->port_number; ++i) { + err = register_netdev(adapter->port[i].dev); + if (err) + CH_WARN("%s: cannot register net device %s, skipping\n", + pci_name(pdev), adapter->port[i].dev->name); + else { + /* + * Change the name we use for messages to the name of + * the first successfully registered interface. + */ + if (!adapter->registered_device_map) + adapter->name = adapter->port[i].dev->name; + + __set_bit(i, &adapter->registered_device_map); + } + } + if (!adapter->registered_device_map) { + CH_ERR("%s: could not register any net devices\n", + pci_name(pdev)); + goto out_release_adapter_res; + } + + printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name, + bi->desc, adapter->params.chip_revision, + adapter->params.pci.is_pcix ? "PCIX" : "PCI", + adapter->params.pci.speed, adapter->params.pci.width); + return 0; + + out_release_adapter_res: + t1_free_sw_modules(adapter); + out_free_dev: + if (adapter) { + if (adapter->regs) + iounmap(adapter->regs); + for (i = bi->port_number - 1; i >= 0; --i) + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); + } + pci_release_regions(pdev); + out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + return err; +} + +static inline void t1_sw_reset(struct pci_dev *pdev) +{ + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3); + pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0); +} + +static void __devexit remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + int i; + struct adapter *adapter = dev->priv; + + for_each_port(adapter, i) + if (test_bit(i, &adapter->registered_device_map)) + unregister_netdev(adapter->port[i].dev); + + t1_free_sw_modules(adapter); + iounmap(adapter->regs); + while (--i >= 0) + if (adapter->port[i].dev) + free_netdev(adapter->port[i].dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + t1_sw_reset(pdev); + } +} + +static struct pci_driver driver = { + .name = driver_name, + .id_table = t1_pci_tbl, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int __init t1_init_module(void) +{ + return pci_module_init(&driver); +} + +static void __exit t1_cleanup_module(void) +{ + pci_unregister_driver(&driver); +} + +module_init(t1_init_module); +module_exit(t1_cleanup_module); + diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h new file mode 100644 index 00000000000..6ac326afcf0 --- /dev/null +++ b/drivers/net/chelsio/cxgb2.h @@ -0,0 +1,122 @@ +/***************************************************************************** + * * + * File: cxgb2.h * + * $Revision: 1.8 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CXGB_LINUX_H__ +#define __CXGB_LINUX_H__ + +#include +#include +#include +#include +#include + +/* This belongs in if_ether.h */ +#define ETH_P_CPL5 0xf + +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct cxgbdev; +struct t1_sge; +struct pemc3; +struct pemc4; +struct pemc5; +struct peulp; +struct petp; +struct pecspi; +struct peespi; +struct work_struct; +struct vlan_group; + +enum { /* adapter flags */ + FULL_INIT_DONE = 0x1, + USING_MSI = 0x2, + TSO_CAPABLE = 0x4, + TCP_CSUM_CAPABLE = 0x8, + UDP_CSUM_CAPABLE = 0x10, + VLAN_ACCEL_CAPABLE = 0x20, + RX_CSUM_ENABLED = 0x40, +}; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned int flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct pemc3 *mc3; + struct pemc4 *mc4; + struct pemc5 *mc5; + struct petp *tp; + struct pecspi *cspi; + struct peespi *espi; + struct peulp *ulp; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + + spinlock_t async_lock ____cacheline_aligned; /* guards async operations */ + u32 slow_intr_mask; +}; + +#endif diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h new file mode 100644 index 00000000000..08f148643e7 --- /dev/null +++ b/drivers/net/chelsio/elmer0.h @@ -0,0 +1,157 @@ +/***************************************************************************** + * * + * File: elmer0.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_ELMER0_H +#define CHELSIO_ELMER0_H + +/* ELMER0 flavors */ +enum { + ELMER0_XC2S300E_6FT256_C, + ELMER0_XC2S100E_6TQ144_C +}; + +/* ELMER0 registers */ +#define A_ELMER0_VERSION 0x100000 +#define A_ELMER0_PHY_CFG 0x100004 +#define A_ELMER0_INT_ENABLE 0x100008 +#define A_ELMER0_INT_CAUSE 0x10000c +#define A_ELMER0_GPI_CFG 0x100010 +#define A_ELMER0_GPI_STAT 0x100014 +#define A_ELMER0_GPO 0x100018 +#define A_ELMER0_PORT0_MI1_CFG 0x400000 + +#define S_MI1_MDI_ENABLE 0 +#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE) +#define F_MI1_MDI_ENABLE V_MI1_MDI_ENABLE(1U) + +#define S_MI1_MDI_INVERT 1 +#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT) +#define F_MI1_MDI_INVERT V_MI1_MDI_INVERT(1U) + +#define S_MI1_PREAMBLE_ENABLE 2 +#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE) +#define F_MI1_PREAMBLE_ENABLE V_MI1_PREAMBLE_ENABLE(1U) + +#define S_MI1_SOF 3 +#define M_MI1_SOF 0x3 +#define V_MI1_SOF(x) ((x) << S_MI1_SOF) +#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF) + +#define S_MI1_CLK_DIV 5 +#define M_MI1_CLK_DIV 0xff +#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV) +#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV) + +#define A_ELMER0_PORT0_MI1_ADDR 0x400004 + +#define S_MI1_REG_ADDR 0 +#define M_MI1_REG_ADDR 0x1f +#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR) +#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR) + +#define S_MI1_PHY_ADDR 5 +#define M_MI1_PHY_ADDR 0x1f +#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR) +#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR) + +#define A_ELMER0_PORT0_MI1_DATA 0x400008 + +#define S_MI1_DATA 0 +#define M_MI1_DATA 0xffff +#define V_MI1_DATA(x) ((x) << S_MI1_DATA) +#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA) + +#define A_ELMER0_PORT0_MI1_OP 0x40000c + +#define S_MI1_OP 0 +#define M_MI1_OP 0x3 +#define V_MI1_OP(x) ((x) << S_MI1_OP) +#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP) + +#define S_MI1_ADDR_AUTOINC 2 +#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC) +#define F_MI1_ADDR_AUTOINC V_MI1_ADDR_AUTOINC(1U) + +#define S_MI1_OP_BUSY 31 +#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY) +#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U) + +#define A_ELMER0_PORT1_MI1_CFG 0x500000 +#define A_ELMER0_PORT1_MI1_ADDR 0x500004 +#define A_ELMER0_PORT1_MI1_DATA 0x500008 +#define A_ELMER0_PORT1_MI1_OP 0x50000c +#define A_ELMER0_PORT2_MI1_CFG 0x600000 +#define A_ELMER0_PORT2_MI1_ADDR 0x600004 +#define A_ELMER0_PORT2_MI1_DATA 0x600008 +#define A_ELMER0_PORT2_MI1_OP 0x60000c +#define A_ELMER0_PORT3_MI1_CFG 0x700000 +#define A_ELMER0_PORT3_MI1_ADDR 0x700004 +#define A_ELMER0_PORT3_MI1_DATA 0x700008 +#define A_ELMER0_PORT3_MI1_OP 0x70000c + +/* Simple bit definition for GPI and GP0 registers. */ +#define ELMER0_GP_BIT0 0x0001 +#define ELMER0_GP_BIT1 0x0002 +#define ELMER0_GP_BIT2 0x0004 +#define ELMER0_GP_BIT3 0x0008 +#define ELMER0_GP_BIT4 0x0010 +#define ELMER0_GP_BIT5 0x0020 +#define ELMER0_GP_BIT6 0x0040 +#define ELMER0_GP_BIT7 0x0080 +#define ELMER0_GP_BIT8 0x0100 +#define ELMER0_GP_BIT9 0x0200 +#define ELMER0_GP_BIT10 0x0400 +#define ELMER0_GP_BIT11 0x0800 +#define ELMER0_GP_BIT12 0x1000 +#define ELMER0_GP_BIT13 0x2000 +#define ELMER0_GP_BIT14 0x4000 +#define ELMER0_GP_BIT15 0x8000 +#define ELMER0_GP_BIT16 0x10000 +#define ELMER0_GP_BIT17 0x20000 +#define ELMER0_GP_BIT18 0x40000 +#define ELMER0_GP_BIT19 0x80000 + +#define MI1_OP_DIRECT_WRITE 1 +#define MI1_OP_DIRECT_READ 2 + +#define MI1_OP_INDIRECT_ADDRESS 0 +#define MI1_OP_INDIRECT_WRITE 1 +#define MI1_OP_INDIRECT_READ_INC 2 +#define MI1_OP_INDIRECT_READ 3 + +#endif diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c new file mode 100644 index 00000000000..7ec2dc7bafa --- /dev/null +++ b/drivers/net/chelsio/espi.c @@ -0,0 +1,386 @@ +/***************************************************************************** + * * + * File: espi.c * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Ethernet SPI functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "espi.h" + +struct peespi { + adapter_t *adapter; + struct espi_intr_counts intr_cnt; + u32 misc_ctrl; + spinlock_t lock; +}; + +#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \ + F_RAMPARITYERR | F_DIP2PARITYERR) +#define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \ + | F_MONITORED_INTERFACE) + +#define TRICN_CNFG 14 +#define TRICN_CMD_READ 0x11 +#define TRICN_CMD_WRITE 0x21 +#define TRICN_CMD_ATTEMPTS 10 + +static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, + int ch_addr, int reg_offset, u32 wr_data) +{ + int busy, attempts = TRICN_CMD_ATTEMPTS; + + t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE)); + t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + + do { + busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + } while (busy && --attempts); + + if (busy) + CH_ERR("%s: TRICN write timed out\n", adapter->name); + + return busy; +} + +/* 1. Deassert rx_reset_core. */ +/* 2. Program TRICN_CNFG registers. */ +/* 3. Deassert rx_reset_link */ +static int tricn_init(adapter_t *adapter) +{ + int i = 0; + int sme = 1; + int stat = 0; + int timeout = 0; + int is_ready = 0; + int dynamic_deskew = 0; + + if (dynamic_deskew) + sme = 0; + + + /* 1 */ + timeout=1000; + do { + stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + is_ready = (stat & 0x4); + timeout--; + udelay(5); + } while (!is_ready || (timeout==0)); + t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + if (timeout==0) + { + CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); + t1_fatal_err(adapter); + } + + /* 2 */ + if (sme) { + tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81); + tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81); + } + for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1); + for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1); + for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80); + for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); + + /* 3 */ + t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + + return 0; +} + +void t1_espi_intr_enable(struct peespi *espi) +{ + u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + + /* + * Cannot enable ESPI interrupts on T1B because HW asserts the + * interrupt incorrectly, namely the driver gets ESPI interrupts + * but no data is actually dropped (can verify this reading the ESPI + * drop registers). Also, once the ESPI interrupt is asserted it + * cannot be cleared (HW bug). + */ + enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); + t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); +} + +void t1_espi_intr_clear(struct peespi *espi) +{ + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); + t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); +} + +void t1_espi_intr_disable(struct peespi *espi) +{ + u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); + t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); +} + +int t1_espi_intr_handler(struct peespi *espi) +{ + u32 cnt; + u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + + if (status & F_DIP4ERR) + espi->intr_cnt.DIP4_err++; + if (status & F_RXDROP) + espi->intr_cnt.rx_drops++; + if (status & F_TXDROP) + espi->intr_cnt.tx_drops++; + if (status & F_RXOVERFLOW) + espi->intr_cnt.rx_ovflw++; + if (status & F_RAMPARITYERR) + espi->intr_cnt.parity_err++; + if (status & F_DIP2PARITYERR) { + espi->intr_cnt.DIP2_parity_err++; + + /* + * Must read the error count to clear the interrupt + * that it causes. + */ + cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + return 0; +} + +static void espi_setup_for_pm3393(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(1) | V_TX_NPORTS(1)); +} + +static void espi_setup_for_vsc7321(adapter_t *adapter) +{ + u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; + + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(1) | V_TX_NPORTS(1)); +} + +/* + * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. + */ +static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) +{ + t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); + if (nports == 4) { + if (is_T2(adapter)) { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0xf00); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x3c0); + } else { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0x7ff); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x1ff); + } + } else { + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, + 0x1fff); + t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, + 0x7ff); + } + t1_write_reg_4(adapter, A_PORT_CONFIG, + V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); +} + +/* T2 Init part -- */ +/* 1. Set T_ESPI_MISCCTRL_ADDR */ +/* 2. Init ESPI registers. */ +/* 3. Init TriCN Hard Macro */ +int t1_espi_init(struct peespi *espi, int mac_type, int nports) +{ + u32 status_enable_extra = 0; + adapter_t *adapter = espi->adapter; + u32 cnt; + u32 status, burstval = 0x800100; + + /* Disable ESPI training. MACs that can handle it enable it below. */ + t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + + if (is_T2(adapter)) { + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + if (nports == 4) { + /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ + burstval = 0x200040; + } + } + t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + + if (mac_type == CHBT_MAC_PM3393) + espi_setup_for_pm3393(adapter); + else if (mac_type == CHBT_MAC_VSC7321) + espi_setup_for_vsc7321(adapter); + else if (mac_type == CHBT_MAC_IXF1010) { + status_enable_extra = F_INTEL1010MODE; + espi_setup_for_ixf1010(adapter, nports); + } else + return -1; + + /* + * Make sure any pending interrupts from the SPI are + * Cleared before enabling the interrupt. + */ + t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); + status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + if (status & F_DIP2PARITYERR) { + cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + } + + /* + * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we + * write the status as is. + */ + if (status && t1_is_T1B(espi->adapter)) + status = 1; + t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + + t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, + status_enable_extra | F_RXSTATUSENABLE); + + if (is_T2(adapter)) { + tricn_init(adapter); + /* + * Always position the control at the 1st port egress IN + * (sop,eop) counter to reduce PIOs for T/N210 workaround. + */ + espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + & ~MON_MASK) | (F_MONITORED_DIRECTION + | F_MONITORED_INTERFACE); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + spin_lock_init(&espi->lock); + } + + return 0; +} + +void t1_espi_destroy(struct peespi *espi) +{ + kfree(espi); +} + +struct peespi *t1_espi_create(adapter_t *adapter) +{ + struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL); + + memset(espi, 0, sizeof(*espi)); + + if (espi) + espi->adapter = adapter; + return espi; +} + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) +{ + struct peespi *espi = adapter->espi; + + if (!is_T2(adapter)) + return; + spin_lock(&espi->lock); + espi->misc_ctrl = (val & ~MON_MASK) | + (espi->misc_ctrl & MON_MASK); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + spin_unlock(&espi->lock); +} + +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) +{ + struct peespi *espi = adapter->espi; + u32 sel; + + if (!is_T2(adapter)) + return 0; + sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); + if (!wait) { + if (!spin_trylock(&espi->lock)) + return 0; + } + else + spin_lock(&espi->lock); + if ((sel != (espi->misc_ctrl & MON_MASK))) { + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + ((espi->misc_ctrl & ~MON_MASK) | sel)); + sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, + espi->misc_ctrl); + } + else + sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + spin_unlock(&espi->lock); + return sel; +} diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h new file mode 100644 index 00000000000..0f84e8b6399 --- /dev/null +++ b/drivers/net/chelsio/espi.h @@ -0,0 +1,67 @@ +/***************************************************************************** + * * + * File: espi.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_ESPI_H +#define CHELSIO_ESPI_H + +#include "common.h" + +struct espi_intr_counts { + unsigned int DIP4_err; + unsigned int rx_drops; + unsigned int tx_drops; + unsigned int rx_ovflw; + unsigned int parity_err; + unsigned int DIP2_parity_err; +}; + +struct peespi; + +struct peespi *t1_espi_create(adapter_t *adapter); +void t1_espi_destroy(struct peespi *espi); +int t1_espi_init(struct peespi *espi, int mac_type, int nports); + +void t1_espi_intr_enable(struct peespi *); +void t1_espi_intr_clear(struct peespi *); +void t1_espi_intr_disable(struct peespi *); +int t1_espi_intr_handler(struct peespi *); + +void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); +u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); + +#endif diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h new file mode 100644 index 00000000000..24501e2232c --- /dev/null +++ b/drivers/net/chelsio/gmac.h @@ -0,0 +1,133 @@ +/***************************************************************************** + * * + * File: gmac.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:58 $ * + * Description: * + * Generic MAC functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_GMAC_H +#define CHELSIO_GMAC_H + +#include "common.h" + +enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL }; +enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 }; + +struct cmac_statistics { + /* Transmit */ + u64 TxOctetsOK; + u64 TxOctetsBad; + u64 TxUnicastFramesOK; + u64 TxMulticastFramesOK; + u64 TxBroadcastFramesOK; + u64 TxPauseFrames; + u64 TxFramesWithDeferredXmissions; + u64 TxLateCollisions; + u64 TxTotalCollisions; + u64 TxFramesAbortedDueToXSCollisions; + u64 TxUnderrun; + u64 TxLengthErrors; + u64 TxInternalMACXmitError; + u64 TxFramesWithExcessiveDeferral; + u64 TxFCSErrors; + + /* Receive */ + u64 RxOctetsOK; + u64 RxOctetsBad; + u64 RxUnicastFramesOK; + u64 RxMulticastFramesOK; + u64 RxBroadcastFramesOK; + u64 RxPauseFrames; + u64 RxFCSErrors; + u64 RxAlignErrors; + u64 RxSymbolErrors; + u64 RxDataErrors; + u64 RxSequenceErrors; + u64 RxRuntErrors; + u64 RxJabberErrors; + u64 RxInternalMACRcvError; + u64 RxInRangeLengthErrors; + u64 RxOutOfRangeLengthField; + u64 RxFrameTooLongErrors; +}; + +struct cmac_ops { + void (*destroy)(struct cmac *); + int (*reset)(struct cmac *); + int (*interrupt_enable)(struct cmac *); + int (*interrupt_disable)(struct cmac *); + int (*interrupt_clear)(struct cmac *); + int (*interrupt_handler)(struct cmac *); + + int (*enable)(struct cmac *, int); + int (*disable)(struct cmac *, int); + + int (*loopback_enable)(struct cmac *); + int (*loopback_disable)(struct cmac *); + + int (*set_mtu)(struct cmac *, int mtu); + int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm); + + int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc); + int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex, + int *fc); + + const struct cmac_statistics *(*statistics_update)(struct cmac *, int); + + int (*macaddress_get)(struct cmac *, u8 mac_addr[6]); + int (*macaddress_set)(struct cmac *, u8 mac_addr[6]); +}; + +typedef struct _cmac_instance cmac_instance; + +struct cmac { + struct cmac_statistics stats; + adapter_t *adapter; + struct cmac_ops *ops; + cmac_instance *instance; +}; + +struct gmac { + unsigned int stats_update_period; + struct cmac *(*create)(adapter_t *adapter, int index); + int (*reset)(adapter_t *); +}; + +extern struct gmac t1_pm3393_ops; +extern struct gmac t1_chelsio_mac_ops; +extern struct gmac t1_vsc7321_ops; +extern struct gmac t1_ixf1010_ops; +extern struct gmac t1_dummy_mac_ops; +#endif diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c new file mode 100644 index 00000000000..f54133af1bc --- /dev/null +++ b/drivers/net/chelsio/mv88x201x.c @@ -0,0 +1,258 @@ +/***************************************************************************** + * * + * File: mv88x201x.c * + * $Revision: 1.7 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * Marvell PHY (mv88x201x) functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "cphy.h" +#include "elmer0.h" + +/* + * The 88x2010 Rev C. requires some link status registers * to be read + * twice in order to get the right values. Future * revisions will fix + * this problem and then this macro * can disappear. + */ +#define MV88x2010_LINK_STATUS_BUGS 1 + +static int led_init(struct cphy *cphy) +{ + /* Setup the LED registers so we can turn on/off. + * Writing these bits maps control to another + * register. mmd(0x1) addr(0x7) + */ + mdio_write(cphy, 0x3, 0x8304, 0xdddd); + return 0; +} + +static int led_link(struct cphy *cphy, u32 do_enable) +{ + u32 led = 0; +#define LINK_ENABLE_BIT 0x1 + + mdio_read(cphy, 0x1, 0x7, &led); + + if (do_enable & LINK_ENABLE_BIT) { + led |= LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } else { + led &= ~LINK_ENABLE_BIT; + mdio_write(cphy, 0x1, 0x7, led); + } + return 0; +} + +/* Port Reset */ +static int mv88x201x_reset(struct cphy *cphy, int wait) +{ + /* This can be done through registers. It is not required since + * a full chip reset is used. + */ + return 0; +} + +static int mv88x201x_interrupt_enable(struct cphy *cphy) +{ + /* Enable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x1); + + /* Enable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_disable(struct cphy *cphy) +{ + /* Disable PHY LASI interrupts. */ + mdio_write(cphy, 0x1, 0x9002, 0x0); + + /* Disable Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + u32 elmer; + + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_clear(struct cphy *cphy) +{ + u32 elmer; + u32 val; + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Required to read twice before clear takes affect. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); + mdio_read(cphy, 0x1, 0x9005, &val); + + /* Read this register after the others above it else + * the register doesn't clear correctly. + */ + mdio_read(cphy, 0x1, 0x1, &val); +#endif + + /* Clear link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + /* Clear PHY LASI interrupts. */ + mdio_read(cphy, 0x1, 0x9005, &val); + +#ifdef MV88x2010_LINK_STATUS_BUGS + /* Do it again. */ + mdio_read(cphy, 0x1, 0x9003, &val); + mdio_read(cphy, 0x1, 0x9004, &val); +#endif + + /* Clear Marvell interrupts through Elmer0. */ + if (t1_is_asic(cphy->adapter)) { + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); + } + return 0; +} + +static int mv88x201x_interrupt_handler(struct cphy *cphy) +{ + /* Clear interrupts */ + mv88x201x_interrupt_clear(cphy); + + /* We have only enabled link change interrupts and so + * cphy_cause must be a link change interrupt. + */ + return cphy_cause_link_change; +} + +static int mv88x201x_set_loopback(struct cphy *cphy, int on) +{ + return 0; +} + +static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok, + int *speed, int *duplex, int *fc) +{ + u32 val = 0; +#define LINK_STATUS_BIT 0x4 + + if (link_ok) { + /* Read link status. */ + mdio_read(cphy, 0x1, 0x1, &val); + val &= LINK_STATUS_BIT; + *link_ok = (val == LINK_STATUS_BIT); + /* Turn on/off Link LED */ + led_link(cphy, *link_ok); + } + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = PAUSE_RX | PAUSE_TX; + return 0; +} + +static void mv88x201x_destroy(struct cphy *cphy) +{ + kfree(cphy); +} + +static struct cphy_ops mv88x201x_ops = { + .destroy = mv88x201x_destroy, + .reset = mv88x201x_reset, + .interrupt_enable = mv88x201x_interrupt_enable, + .interrupt_disable = mv88x201x_interrupt_disable, + .interrupt_clear = mv88x201x_interrupt_clear, + .interrupt_handler = mv88x201x_interrupt_handler, + .get_link_status = mv88x201x_get_link_status, + .set_loopback = mv88x201x_set_loopback, +}; + +static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr, + struct mdio_ops *mdio_ops) +{ + u32 val; + struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL); + + if (!cphy) + return NULL; + memset(cphy, 0, sizeof(*cphy)); + cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops); + + /* Commands the PHY to enable XFP's clock. */ + mdio_read(cphy, 0x3, 0x8300, &val); + mdio_write(cphy, 0x3, 0x8300, val | 1); + + /* Clear link status. Required because of a bug in the PHY. */ + mdio_read(cphy, 0x1, 0x8, &val); + mdio_read(cphy, 0x3, 0x8, &val); + + /* Allows for Link,Ack LED turn on/off */ + led_init(cphy); + return cphy; +} + +/* Chip Reset */ +static int mv88x201x_phy_reset(adapter_t *adapter) +{ + u32 val; + + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~4; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + msleep(100); + + t1_tpi_write(adapter, A_ELMER0_GPO, val | 4); + msleep(1000); + + /* Now lets enable the Laser. Delay 100us */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val |= 0x8000; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + udelay(100); + return 0; +} + +struct gphy t1_mv88x201x_ops = { + mv88x201x_phy_create, + mv88x201x_phy_reset +}; diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h new file mode 100644 index 00000000000..095cb474434 --- /dev/null +++ b/drivers/net/chelsio/osdep.h @@ -0,0 +1,169 @@ +/***************************************************************************** + * * + * File: osdep.h * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef __CHELSIO_OSDEP_H +#define __CHELSIO_OSDEP_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cxgb2.h" + +#define DRV_NAME "cxgb" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +/* + * More powerful macro that selectively prints messages based on msg_enable. + * For info and debugging messages. + */ +#define CH_MSG(adapter, level, category, fmt, ...) do { \ + if ((adapter)->msg_enable & NETIF_MSG_##category) \ + printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ + ## __VA_ARGS__); \ +} while (0) + +#ifdef DEBUG +# define CH_DBG(adapter, category, fmt, ...) \ + CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) +#else +# define CH_DBG(fmt, ...) +#endif + +/* Additional NETIF_MSG_* categories */ +#define NETIF_MSG_MMIO 0x8000000 + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +/* + * Now that we have included the driver's main data structure, + * we typedef it to something the rest of the system understands. + */ +typedef struct adapter adapter_t; + +#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock) +#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock) + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr) +{ + u16 val = readw(adapter->regs + reg_addr); + + CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, + val); + return val; +} + +static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val) +{ + CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, + val); + writew(val, adapter->regs + reg_addr); +} + +static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr) +{ + u32 val = readl(adapter->regs + reg_addr); + + CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, + val); + return val; +} + +static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val) +{ + CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, + val); + writel(val, adapter->regs + reg_addr); +} + +static inline const char *port_name(adapter_t *adapter, int port_idx) +{ + return adapter->port[port_idx].dev->name; +} + +static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx, + u8 hw_addr[]) +{ + memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN); +} + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; + + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#endif diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c new file mode 100644 index 00000000000..17bd20f60d9 --- /dev/null +++ b/drivers/net/chelsio/pm3393.c @@ -0,0 +1,831 @@ +/***************************************************************************** + * * + * File: pm3393.c * + * $Revision: 1.9 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "gmac.h" +#include "elmer0.h" +#include "suni1x10gexp_regs.h" + +/* 802.3ae 10Gb/s MDIO Manageable Device(MMD) + */ +#define MMD_RESERVED 0 +#define MMD_PMAPMD 1 +#define MMD_WIS 2 +#define MMD_PCS 3 +#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */ +#define MMD_DTE_XGXS 5 + +#define PHY_XGXS_CTRL_1 0 +#define PHY_XGXS_STATUS_1 1 + +#define OFFSET(REG_ADDR) (REG_ADDR << 2) + +/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */ +#define MAX_FRAME_SIZE 9600 + +#define IPG 12 +#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ + SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ + SUNI1x10GEXP_BITMSK_TXXG_PADEN) +#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \ + SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP) + +/* Update statistics every 15 minutes */ +#define STATS_TICK_SECS (15 * 60) + +enum { /* RMON registers */ + RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW, + RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW, + RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW, + RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW, + RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW, + RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW, + RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW, + RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW, + RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW, + RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW, + RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, + RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, + RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, + + TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, + TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, + TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW, + TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, + TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, + TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, + TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW +}; + +struct _cmac_instance { + u8 enabled; + u8 fc; + u8 mac_addr[6]; +}; + +static int pmread(struct cmac *cmac, u32 reg, u32 * data32) +{ + t1_tpi_read(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +static int pmwrite(struct cmac *cmac, u32 reg, u32 data32) +{ + t1_tpi_write(cmac->adapter, OFFSET(reg), data32); + return 0; +} + +/* Port reset. */ +static int pm3393_reset(struct cmac *cmac) +{ + return 0; +} + +/* + * Enable interrupts for the PM3393 + + 1. Enable PM3393 BLOCK interrupts. + 2. Enable PM3393 Master Interrupt bit(INTE) + 3. Enable ELMER's PM3393 bit. + 4. Enable Terminator external interrupt. +*/ +static int pm3393_interrupt_enable(struct cmac *cmac) +{ + u32 pl_intr; + + /* PM3393 - Enabling all hardware block interrupts. + */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); + + /* Don't interrupt on statistics overflow, we are polling */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff); + + /* PM3393 - Global interrupt enable + */ + /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, + 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE); + pl_intr |= F_PL_INTR_EXT; + t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr); + return 0; +} + +static int pm3393_interrupt_disable(struct cmac *cmac) +{ + u32 elmer; + + /* PM3393 - Enabling HW interrupt blocks. */ + pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0); + pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0); + + /* PM3393 - Global interrupt enable */ + pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0); + + /* ELMER - External chip interrupts. */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT */ + /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP + * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level. + */ + + return 0; +} + +static int pm3393_interrupt_clear(struct cmac *cmac) +{ + u32 elmer; + u32 pl_intr; + u32 val32; + + /* PM3393 - Clearing HW interrupt blocks. Note, this assumes + * bit WCIMODE=0 for a clear-on-read. + */ + pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32); + pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION, + &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32); + pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32); + + /* PM3393 - Global interrupt status + */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32); + + /* ELMER - External chip interrupts. + */ + t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT1; + t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer); + + /* TERMINATOR - PL_INTERUPTS_EXT + */ + pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE); + pl_intr |= F_PL_INTR_EXT; + t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr); + + return 0; +} + +/* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ + /* Read the master interrupt status register. */ + pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, + &master_intr_status); + CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", + master_intr_status); + + /* TBD XXX Lets just clear everything for now */ + pm3393_interrupt_clear(cmac); + + return 0; +} + +static int pm3393_enable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, + (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN)); + + if (which & MAC_DIRECTION_TX) { + u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0; + + if (cmac->instance->fc & PAUSE_RX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX; + if (cmac->instance->fc & PAUSE_TX) + val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX; + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val); + } + + cmac->instance->enabled |= which; + return 0; +} + +static int pm3393_enable_port(struct cmac *cmac, int which) +{ + /* Clear port statistics */ + pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_CLEAR); + udelay(2); + memset(&cmac->stats, 0, sizeof(struct cmac_statistics)); + + pm3393_enable(cmac, which); + + /* + * XXX This should be done by the PHY and preferrably not at all. + * The PHY doesn't give us link status indication on its own so have + * the link management code query it instead. + */ + { + extern void link_changed(adapter_t *adapter, int port_id); + + link_changed(cmac->adapter, 0); + } + return 0; +} + +static int pm3393_disable(struct cmac *cmac, int which) +{ + if (which & MAC_DIRECTION_RX) + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL); + if (which & MAC_DIRECTION_TX) + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL); + + /* + * The disable is graceful. Give the PM3393 time. Can't wait very + * long here, we may be holding locks. + */ + udelay(20); + + cmac->instance->enabled &= ~which; + return 0; +} + +static int pm3393_loopback_enable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_loopback_disable(struct cmac *cmac) +{ + return 0; +} + +static int pm3393_set_mtu(struct cmac *cmac, int mtu) +{ + int enabled = cmac->instance->enabled; + + /* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */ + mtu += 14 + 4; + if (mtu > MAX_FRAME_SIZE) + return -EINVAL; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static u32 calc_crc(u8 *b, int len) +{ + int i; + u32 crc = (u32)~0; + + /* calculate crc one bit at a time */ + while (len--) { + crc ^= *b++; + for (i = 0; i < 8; i++) { + if (crc & 0x1) + crc = (crc >> 1) ^ 0xedb88320; + else + crc = (crc >> 1); + } + } + + /* reverse bits */ + crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0); + crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc); + crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa); + /* swap bytes */ + crc = (crc >> 16) | (crc << 16); + crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00); + + return crc; +} + +static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) +{ + int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; + u32 rx_mode; + + /* Disable MAC RX before reconfiguring it */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX); + + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode); + rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE | + SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, + (u16)rx_mode); + + if (t1_rx_mode_promisc(rm)) { + /* Promiscuous mode. */ + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE; + } + if (t1_rx_mode_allmulti(rm)) { + /* Accept all multicast. */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } else if (t1_rx_mode_mc_cnt(rm)) { + /* Accept one or more multicast(s). */ + u8 *addr; + int bit; + u16 mc_filter[4] = { 0, }; + + while ((addr = t1_get_next_mcaddr(rm))) { + bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f; /* bit[23:28] */ + mc_filter[bit >> 4] |= 1 << (bit & 0xf); + } + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]); + rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; + } + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode); + + if (enabled) + pm3393_enable(cmac, MAC_DIRECTION_RX); + + return 0; +} + +static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed, + int *duplex, int *fc) +{ + if (speed) + *speed = SPEED_10000; + if (duplex) + *duplex = DUPLEX_FULL; + if (fc) + *fc = cmac->instance->fc; + return 0; +} + +static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, + int fc) +{ + if (speed >= 0 && speed != SPEED_10000) + return -1; + if (duplex >= 0 && duplex != DUPLEX_FULL) + return -1; + if (fc & ~(PAUSE_TX | PAUSE_RX)) + return -1; + + if (fc != cmac->instance->fc) { + cmac->instance->fc = (u8) fc; + if (cmac->instance->enabled & MAC_DIRECTION_TX) + pm3393_enable(cmac, MAC_DIRECTION_TX); + } + return 0; +} + +#define RMON_UPDATE(mac, name, stat_name) \ + { \ + t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \ + t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \ + (mac)->stats.stat_name = ((u64)val0 & 0xffff) | \ + (((u64)val1 & 0xffff) << 16) | \ + (((u64)val2 & 0xff) << 32) | \ + ((mac)->stats.stat_name & \ + (~(u64)0 << 40)); \ + if (ro & \ + ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \ + (mac)->stats.stat_name += ((u64)1 << 40); \ + } + +static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, + int flag) +{ + u64 ro; + u32 val0, val1, val2, val3; + + /* Snap the counters */ + pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL, + SUNI1x10GEXP_BITMSK_MSTAT_SNAP); + + /* Counter rollover, clear on read */ + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2); + pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3); + ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) | + (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48); + + /* Rx stats */ + RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK); + RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK); + RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK); + RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK); + RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames); + RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors); + RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors, + RxInternalMACRcvError); + RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); + RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors); + RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors); + RMON_UPDATE(mac, RxJabbers, RxJabberErrors); + RMON_UPDATE(mac, RxFragments, RxRuntErrors); + RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); + + /* Tx stats */ + RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); + RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError, + TxInternalMACXmitError); + RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors); + RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK); + RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); + RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); + RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); + + return &mac->stats; +} + +static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6]) +{ + memcpy(mac_addr, cmac->instance->mac_addr, 6); + return 0; +} + +static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6]) +{ + u32 val, lo, mid, hi, enabled = cmac->instance->enabled; + + /* + * MAC addr: 00:07:43:00:13:09 + * + * ma[5] = 0x09 + * ma[4] = 0x13 + * ma[3] = 0x00 + * ma[2] = 0x43 + * ma[1] = 0x07 + * ma[0] = 0x00 + * + * The PM3393 requires byte swapping and reverse order entry + * when programming MAC addresses: + * + * low_bits[15:0] = ma[1]:ma[0] + * mid_bits[31:16] = ma[3]:ma[2] + * high_bits[47:32] = ma[5]:ma[4] + */ + + /* Store local copy */ + memcpy(cmac->instance->mac_addr, ma, 6); + + lo = ((u32) ma[1] << 8) | (u32) ma[0]; + mid = ((u32) ma[3] << 8) | (u32) ma[2]; + hi = ((u32) ma[5] << 8) | (u32) ma[4]; + + /* Disable Rx/Tx MAC before configuring it. */ + if (enabled) + pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); + + /* Set RXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi); + + /* Set TXXG Station Address */ + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi); + + /* Setup Exact Match Filter 1 with our MAC address + * + * Must disable exact match filter before configuring it. + */ + pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val); + val &= 0xff0f; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid); + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi); + + val |= 0x0090; + pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); + + if (enabled) + pm3393_enable(cmac, enabled); + return 0; +} + +static void pm3393_destroy(struct cmac *cmac) +{ + kfree(cmac); +} + +static struct cmac_ops pm3393_ops = { + .destroy = pm3393_destroy, + .reset = pm3393_reset, + .interrupt_enable = pm3393_interrupt_enable, + .interrupt_disable = pm3393_interrupt_disable, + .interrupt_clear = pm3393_interrupt_clear, + .interrupt_handler = pm3393_interrupt_handler, + .enable = pm3393_enable_port, + .disable = pm3393_disable, + .loopback_enable = pm3393_loopback_enable, + .loopback_disable = pm3393_loopback_disable, + .set_mtu = pm3393_set_mtu, + .set_rx_mode = pm3393_set_rx_mode, + .get_speed_duplex_fc = pm3393_get_speed_duplex_fc, + .set_speed_duplex_fc = pm3393_set_speed_duplex_fc, + .statistics_update = pm3393_update_statistics, + .macaddress_get = pm3393_macaddress_get, + .macaddress_set = pm3393_macaddress_set +}; + +static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) +{ + struct cmac *cmac; + + cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); + if (!cmac) + return NULL; + memset(cmac, 0, sizeof(*cmac)); + + cmac->ops = &pm3393_ops; + cmac->instance = (cmac_instance *) (cmac + 1); + cmac->adapter = adapter; + cmac->instance->fc = PAUSE_TX | PAUSE_RX; + + t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000); + t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000); + t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800); + t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */ + t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800); + t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00); + t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */ + + t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */ + t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */ + t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */ + t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */ + t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */ + t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */ + t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */ + t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */ + t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */ + t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */ + t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */ + t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */ + + t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */ + t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */ + t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */ + t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */ + + t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */ + t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */ + + t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */ + t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */ + + t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ + /* For T1 use timer based Mac flow control. */ + if (t1_is_T1B(adapter)) + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ + + /* Setup Exact Match Filter 0 to allow broadcast packets. + */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */ + t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */ + t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */ + t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */ + t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */ + + t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */ + t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */ + t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */ + + return cmac; +} + +static int pm3393_mac_reset(adapter_t * adapter) +{ + u32 val; + u32 x; + u32 is_pl4_reset_finished; + u32 is_pl4_outof_lock; + u32 is_xaui_mabc_pll_locked; + u32 successful_reset; + int i; + + /* The following steps are required to properly reset + * the PM3393. This information is provided in the + * PM3393 datasheet (Issue 2: November 2002) + * section 13.1 -- Device Reset. + * + * The PM3393 has three types of components that are + * individually reset: + * + * DRESETB - Digital circuitry + * PL4_ARESETB - PL4 analog circuitry + * XAUI_ARESETB - XAUI bus analog circuitry + * + * Steps to reset PM3393 using RSTB pin: + * + * 1. Assert RSTB pin low ( write 0 ) + * 2. Wait at least 1ms to initiate a complete initialization of device. + * 3. Wait until all external clocks and REFSEL are stable. + * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable) + * 5. De-assert RSTB ( write 1 ) + * 6. Wait until internal timers to expires after ~14ms. + * - Allows analog clock synthesizer(PL4CSU) to stabilize to + * selected reference frequency before allowing the digital + * portion of the device to operate. + * 7. Wait at least 200us for XAUI interface to stabilize. + * 8. Verify the PM3393 came out of reset successfully. + * Set successful reset flag if everything worked else try again + * a few more times. + */ + + successful_reset = 0; + for (i = 0; i < 3 && !successful_reset; i++) { + /* 1 */ + t1_tpi_read(adapter, A_ELMER0_GPO, &val); + val &= ~1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 2 */ + msleep(1); + + /* 3 */ + msleep(1); + + /* 4 */ + msleep(2 /*1 extra ms for safety */ ); + + /* 5 */ + val |= 1; + t1_tpi_write(adapter, A_ELMER0_GPO, val); + + /* 6 */ + msleep(15 /*1 extra ms for safety */ ); + + /* 7 */ + msleep(1); + + /* 8 */ + + /* Has PL4 analog block come out of reset correctly? */ + t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val); + is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED); + + /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence + * figure out why? */ + + /* Have all PL4 block clocks locked? */ + x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL + /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ | + SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL | + SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL); + is_pl4_outof_lock = (val & x); + + /* ??? If this fails, might be able to software reset the XAUI part + * and try to recover... thus saving us from doing another HW reset */ + /* Has the XAUI MABC PLL circuitry stablized? */ + is_xaui_mabc_pll_locked = + (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED); + + successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock + && is_xaui_mabc_pll_locked); + + CH_DBG(adapter, HW, + "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " + "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", + i, is_pl4_reset_finished, val, is_pl4_outof_lock, + is_xaui_mabc_pll_locked); + } + return successful_reset ? 0 : 1; +} + +struct gmac t1_pm3393_ops = { + STATS_TICK_SECS, + pm3393_mac_create, + pm3393_mac_reset +}; diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h new file mode 100644 index 00000000000..5a70803eb1b --- /dev/null +++ b/drivers/net/chelsio/regs.h @@ -0,0 +1,453 @@ +/***************************************************************************** + * * + * File: regs.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +/* Do not edit this file */ + +/* SGE registers */ +#define A_SG_CONTROL 0x0 + +#define S_CMDQ0_ENABLE 0 +#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE) +#define F_CMDQ0_ENABLE V_CMDQ0_ENABLE(1U) + +#define S_CMDQ1_ENABLE 1 +#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE) +#define F_CMDQ1_ENABLE V_CMDQ1_ENABLE(1U) + +#define S_FL0_ENABLE 2 +#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE) +#define F_FL0_ENABLE V_FL0_ENABLE(1U) + +#define S_FL1_ENABLE 3 +#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE) +#define F_FL1_ENABLE V_FL1_ENABLE(1U) + +#define S_CPL_ENABLE 4 +#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE) +#define F_CPL_ENABLE V_CPL_ENABLE(1U) + +#define S_RESPONSE_QUEUE_ENABLE 5 +#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE) +#define F_RESPONSE_QUEUE_ENABLE V_RESPONSE_QUEUE_ENABLE(1U) + +#define S_CMDQ_PRIORITY 6 +#define M_CMDQ_PRIORITY 0x3 +#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY) +#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY) + +#define S_DISABLE_CMDQ1_GTS 9 +#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) +#define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) + +#define S_ENABLE_BIG_ENDIAN 12 +#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) +#define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) + +#define S_ISCSI_COALESCE 14 +#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE) +#define F_ISCSI_COALESCE V_ISCSI_COALESCE(1U) + +#define S_RX_PKT_OFFSET 15 +#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET) + +#define S_VLAN_XTRACT 18 +#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT) +#define F_VLAN_XTRACT V_VLAN_XTRACT(1U) + +#define A_SG_DOORBELL 0x4 +#define A_SG_CMD0BASELWR 0x8 +#define A_SG_CMD0BASEUPR 0xc +#define A_SG_CMD1BASELWR 0x10 +#define A_SG_CMD1BASEUPR 0x14 +#define A_SG_FL0BASELWR 0x18 +#define A_SG_FL0BASEUPR 0x1c +#define A_SG_FL1BASELWR 0x20 +#define A_SG_FL1BASEUPR 0x24 +#define A_SG_CMD0SIZE 0x28 +#define A_SG_FL0SIZE 0x2c +#define A_SG_RSPSIZE 0x30 +#define A_SG_RSPBASELWR 0x34 +#define A_SG_RSPBASEUPR 0x38 +#define A_SG_FLTHRESHOLD 0x3c +#define A_SG_RSPQUEUECREDIT 0x40 +#define A_SG_SLEEPING 0x48 +#define A_SG_INTRTIMER 0x4c +#define A_SG_CMD1SIZE 0xb0 +#define A_SG_FL1SIZE 0xb4 +#define A_SG_INT_ENABLE 0xb8 + +#define S_RESPQ_EXHAUSTED 0 +#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED) +#define F_RESPQ_EXHAUSTED V_RESPQ_EXHAUSTED(1U) + +#define S_RESPQ_OVERFLOW 1 +#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW) +#define F_RESPQ_OVERFLOW V_RESPQ_OVERFLOW(1U) + +#define S_FL_EXHAUSTED 2 +#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED) +#define F_FL_EXHAUSTED V_FL_EXHAUSTED(1U) + +#define S_PACKET_TOO_BIG 3 +#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG) +#define F_PACKET_TOO_BIG V_PACKET_TOO_BIG(1U) + +#define S_PACKET_MISMATCH 4 +#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH) +#define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) + +#define A_SG_INT_CAUSE 0xbc + +/* MC3 registers */ + +#define S_READY 1 +#define V_READY(x) ((x) << S_READY) +#define F_READY V_READY(1U) + +/* MC4 registers */ + +#define A_MC4_CFG 0x180 +#define S_MC4_SLOW 25 +#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW) +#define F_MC4_SLOW V_MC4_SLOW(1U) + +/* TPI registers */ + +#define A_TPI_ADDR 0x280 +#define A_TPI_WR_DATA 0x284 +#define A_TPI_RD_DATA 0x288 +#define A_TPI_CSR 0x28c + +#define S_TPIWR 0 +#define V_TPIWR(x) ((x) << S_TPIWR) +#define F_TPIWR V_TPIWR(1U) + +#define S_TPIRDY 1 +#define V_TPIRDY(x) ((x) << S_TPIRDY) +#define F_TPIRDY V_TPIRDY(1U) + +#define A_TPI_PAR 0x29c + +#define S_TPIPAR 0 +#define M_TPIPAR 0x7f +#define V_TPIPAR(x) ((x) << S_TPIPAR) +#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR) + +/* TP registers */ + +#define A_TP_IN_CONFIG 0x300 + +#define S_TP_IN_CSPI_CPL 3 +#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL) +#define F_TP_IN_CSPI_CPL V_TP_IN_CSPI_CPL(1U) + +#define S_TP_IN_CSPI_CHECK_IP_CSUM 5 +#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM) +#define F_TP_IN_CSPI_CHECK_IP_CSUM V_TP_IN_CSPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_CSPI_CHECK_TCP_CSUM 6 +#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM) +#define F_TP_IN_CSPI_CHECK_TCP_CSUM V_TP_IN_CSPI_CHECK_TCP_CSUM(1U) + +#define S_TP_IN_ESPI_ETHERNET 8 +#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET) +#define F_TP_IN_ESPI_ETHERNET V_TP_IN_ESPI_ETHERNET(1U) + +#define S_TP_IN_ESPI_CHECK_IP_CSUM 12 +#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM) +#define F_TP_IN_ESPI_CHECK_IP_CSUM V_TP_IN_ESPI_CHECK_IP_CSUM(1U) + +#define S_TP_IN_ESPI_CHECK_TCP_CSUM 13 +#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM) +#define F_TP_IN_ESPI_CHECK_TCP_CSUM V_TP_IN_ESPI_CHECK_TCP_CSUM(1U) + +#define S_OFFLOAD_DISABLE 14 +#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE) +#define F_OFFLOAD_DISABLE V_OFFLOAD_DISABLE(1U) + +#define A_TP_OUT_CONFIG 0x304 + +#define S_TP_OUT_CSPI_CPL 2 +#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL) +#define F_TP_OUT_CSPI_CPL V_TP_OUT_CSPI_CPL(1U) + +#define S_TP_OUT_ESPI_ETHERNET 6 +#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET) +#define F_TP_OUT_ESPI_ETHERNET V_TP_OUT_ESPI_ETHERNET(1U) + +#define S_TP_OUT_ESPI_GENERATE_IP_CSUM 10 +#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_IP_CSUM V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U) + +#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM 11 +#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM) +#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U) + +#define A_TP_GLOBAL_CONFIG 0x308 + +#define S_IP_TTL 0 +#define M_IP_TTL 0xff +#define V_IP_TTL(x) ((x) << S_IP_TTL) + +#define S_TCP_CSUM 11 +#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM) +#define F_TCP_CSUM V_TCP_CSUM(1U) + +#define S_UDP_CSUM 12 +#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM) +#define F_UDP_CSUM V_UDP_CSUM(1U) + +#define S_IP_CSUM 13 +#define V_IP_CSUM(x) ((x) << S_IP_CSUM) +#define F_IP_CSUM V_IP_CSUM(1U) + +#define S_PATH_MTU 15 +#define V_PATH_MTU(x) ((x) << S_PATH_MTU) +#define F_PATH_MTU V_PATH_MTU(1U) + +#define S_5TUPLE_LOOKUP 17 +#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP) + +#define S_SYN_COOKIE_PARAMETER 26 +#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) + +#define A_TP_PC_CONFIG 0x348 +#define S_TP_PC_REV 30 +#define M_TP_PC_REV 0x3 +#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) +#define A_TP_RESET 0x44c +#define S_TP_RESET 0 +#define V_TP_RESET(x) ((x) << S_TP_RESET) +#define F_TP_RESET V_TP_RESET(1U) + +#define A_TP_INT_ENABLE 0x470 +#define A_TP_INT_CAUSE 0x474 +#define A_TP_TX_DROP_CONFIG 0x4b8 + +#define S_ENABLE_TX_DROP 31 +#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP) +#define F_ENABLE_TX_DROP V_ENABLE_TX_DROP(1U) + +#define S_ENABLE_TX_ERROR 30 +#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR) +#define F_ENABLE_TX_ERROR V_ENABLE_TX_ERROR(1U) + +#define S_DROP_TICKS_CNT 4 +#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT) + +#define S_NUM_PKTS_DROPPED 0 +#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED) + +/* CSPI registers */ + +#define S_DIP4ERR 0 +#define V_DIP4ERR(x) ((x) << S_DIP4ERR) +#define F_DIP4ERR V_DIP4ERR(1U) + +#define S_RXDROP 1 +#define V_RXDROP(x) ((x) << S_RXDROP) +#define F_RXDROP V_RXDROP(1U) + +#define S_TXDROP 2 +#define V_TXDROP(x) ((x) << S_TXDROP) +#define F_TXDROP V_TXDROP(1U) + +#define S_RXOVERFLOW 3 +#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW) +#define F_RXOVERFLOW V_RXOVERFLOW(1U) + +#define S_RAMPARITYERR 4 +#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR) +#define F_RAMPARITYERR V_RAMPARITYERR(1U) + +/* ESPI registers */ + +#define A_ESPI_SCH_TOKEN0 0x880 +#define A_ESPI_SCH_TOKEN1 0x884 +#define A_ESPI_SCH_TOKEN2 0x888 +#define A_ESPI_SCH_TOKEN3 0x88c +#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890 +#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894 +#define A_ESPI_CALENDAR_LENGTH 0x898 +#define A_PORT_CONFIG 0x89c + +#define S_RX_NPORTS 0 +#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS) + +#define S_TX_NPORTS 8 +#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS) + +#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0 + +#define S_RXSTATUSENABLE 0 +#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE) +#define F_RXSTATUSENABLE V_RXSTATUSENABLE(1U) + +#define S_INTEL1010MODE 4 +#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE) +#define F_INTEL1010MODE V_INTEL1010MODE(1U) + +#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8 +#define A_ESPI_TRAIN 0x8ac +#define A_ESPI_INTR_STATUS 0x8c8 + +#define S_DIP2PARITYERR 5 +#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR) +#define F_DIP2PARITYERR V_DIP2PARITYERR(1U) + +#define A_ESPI_INTR_ENABLE 0x8cc +#define A_RX_DROP_THRESHOLD 0x8d0 +#define A_ESPI_RX_RESET 0x8ec +#define A_ESPI_MISC_CONTROL 0x8f0 + +#define S_OUT_OF_SYNC_COUNT 0 +#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT) + +#define S_DIP2_PARITY_ERR_THRES 5 +#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES) + +#define S_DIP4_THRES 9 +#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES) + +#define S_MONITORED_PORT_NUM 25 +#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM) + +#define S_MONITORED_DIRECTION 27 +#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION) +#define F_MONITORED_DIRECTION V_MONITORED_DIRECTION(1U) + +#define S_MONITORED_INTERFACE 28 +#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE) +#define F_MONITORED_INTERFACE V_MONITORED_INTERFACE(1U) + +#define A_ESPI_DIP2_ERR_COUNT 0x8f4 +#define A_ESPI_CMD_ADDR 0x8f8 + +#define S_WRITE_DATA 0 +#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA) + +#define S_REGISTER_OFFSET 8 +#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET) + +#define S_CHANNEL_ADDR 12 +#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR) + +#define S_MODULE_ADDR 16 +#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR) + +#define S_BUNDLE_ADDR 20 +#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR) + +#define S_SPI4_COMMAND 24 +#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND) + +#define A_ESPI_GOSTAT 0x8fc +#define S_ESPI_CMD_BUSY 8 +#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY) +#define F_ESPI_CMD_BUSY V_ESPI_CMD_BUSY(1U) + +/* PL registers */ + +#define A_PL_ENABLE 0xa00 + +#define S_PL_INTR_SGE_ERR 0 +#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR) +#define F_PL_INTR_SGE_ERR V_PL_INTR_SGE_ERR(1U) + +#define S_PL_INTR_SGE_DATA 1 +#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA) +#define F_PL_INTR_SGE_DATA V_PL_INTR_SGE_DATA(1U) + +#define S_PL_INTR_TP 6 +#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP) +#define F_PL_INTR_TP V_PL_INTR_TP(1U) + +#define S_PL_INTR_ESPI 8 +#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI) +#define F_PL_INTR_ESPI V_PL_INTR_ESPI(1U) + +#define S_PL_INTR_PCIX 10 +#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX) +#define F_PL_INTR_PCIX V_PL_INTR_PCIX(1U) + +#define S_PL_INTR_EXT 11 +#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT) +#define F_PL_INTR_EXT V_PL_INTR_EXT(1U) + +#define A_PL_CAUSE 0xa04 + +/* MC5 registers */ + +#define A_MC5_CONFIG 0xc04 + +#define S_TCAM_RESET 1 +#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET) +#define F_TCAM_RESET V_TCAM_RESET(1U) + +#define S_M_BUS_ENABLE 5 +#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE) +#define F_M_BUS_ENABLE V_M_BUS_ENABLE(1U) + +/* PCICFG registers */ + +#define A_PCICFG_PM_CSR 0x44 +#define A_PCICFG_VPD_ADDR 0x4a + +#define S_VPD_OP_FLAG 15 +#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG) +#define F_VPD_OP_FLAG V_VPD_OP_FLAG(1U) + +#define A_PCICFG_VPD_DATA 0x4c + +#define A_PCICFG_INTR_ENABLE 0xf4 +#define A_PCICFG_INTR_CAUSE 0xf8 + +#define A_PCICFG_MODE 0xfc + +#define S_PCI_MODE_64BIT 0 +#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT) +#define F_PCI_MODE_64BIT V_PCI_MODE_64BIT(1U) + +#define S_PCI_MODE_PCIX 5 +#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX) +#define F_PCI_MODE_PCIX V_PCI_MODE_PCIX(1U) + +#define S_PCI_MODE_CLK 6 +#define M_PCI_MODE_CLK 0x3 +#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) + diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c new file mode 100644 index 00000000000..bcf8b1e939b --- /dev/null +++ b/drivers/net/chelsio/sge.c @@ -0,0 +1,1451 @@ +/***************************************************************************** + * * + * File: sge.c * + * $Revision: 1.13 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * DMA engine. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpl5_cmd.h" +#include "sge.h" +#include "regs.h" +#include "espi.h" + +#include + +#define SGE_CMDQ_N 2 +#define SGE_FREELQ_N 2 +#define SGE_CMDQ0_E_N 512 +#define SGE_CMDQ1_E_N 128 +#define SGE_FREEL_SIZE 4096 +#define SGE_JUMBO_FREEL_SIZE 512 +#define SGE_FREEL_REFILL_THRESH 16 +#define SGE_RESPQ_E_N 1024 +#define SGE_INTR_BUCKETSIZE 100 +#define SGE_INTR_LATBUCKETS 5 +#define SGE_INTR_MAXBUCKETS 11 +#define SGE_INTRTIMER0 1 +#define SGE_INTRTIMER1 50 +#define SGE_INTRTIMER_NRES 10000 +#define SGE_RX_COPY_THRESHOLD 256 +#define SGE_RX_SM_BUF_SIZE 1536 + +#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4) + +#define SGE_RX_OFFSET 2 +#ifndef NET_IP_ALIGN +# define NET_IP_ALIGN SGE_RX_OFFSET +#endif + +/* + * Memory Mapped HW Command, Freelist and Response Queue Descriptors + */ +#if defined(__BIG_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 AddrLow; + u32 GenerationBit : 1; + u32 BufferLength : 31; + u32 RespQueueSelector : 4; + u32 ResponseTokens : 12; + u32 CmdId : 8; + u32 Reserved : 3; + u32 TokenValid : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 DataValid : 1; + u32 GenerationBit2 : 1; + u32 AddrHigh; +}; + +struct freelQ_e { + u32 AddrLow; + u32 GenerationBit : 1; + u32 BufferLength : 31; + u32 Reserved : 31; + u32 GenerationBit2 : 1; + u32 AddrHigh; +}; + +struct respQ_e { + u32 Qsleeping : 4; + u32 Cmdq1CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq0DmaComplete : 5; + u32 FreelistQid : 2; + u32 CreditValid : 1; + u32 DataValid : 1; + u32 Offload : 1; + u32 Eop : 1; + u32 Sop : 1; + u32 GenerationBit : 1; + u32 BufferLength; +}; + +#elif defined(__LITTLE_ENDIAN_BITFIELD) +struct cmdQ_e { + u32 BufferLength : 31; + u32 GenerationBit : 1; + u32 AddrLow; + u32 AddrHigh; + u32 GenerationBit2 : 1; + u32 DataValid : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 TokenValid : 1; + u32 Reserved : 3; + u32 CmdId : 8; + u32 ResponseTokens : 12; + u32 RespQueueSelector : 4; +}; + +struct freelQ_e { + u32 BufferLength : 31; + u32 GenerationBit : 1; + u32 AddrLow; + u32 AddrHigh; + u32 GenerationBit2 : 1; + u32 Reserved : 31; +}; + +struct respQ_e { + u32 BufferLength; + u32 GenerationBit : 1; + u32 Sop : 1; + u32 Eop : 1; + u32 Offload : 1; + u32 DataValid : 1; + u32 CreditValid : 1; + u32 FreelistQid : 2; + u32 Cmdq0DmaComplete : 5; + u32 Cmdq0CreditReturn : 5; + u32 Cmdq1DmaComplete : 5; + u32 Cmdq1CreditReturn : 5; + u32 Qsleeping : 4; +} ; +#endif + +/* + * SW Context Command and Freelist Queue Descriptors + */ +struct cmdQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); + unsigned int single; +}; + +struct freelQ_ce { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(dma_addr); + DECLARE_PCI_UNMAP_LEN(dma_len); +}; + +/* + * SW Command, Freelist and Response Queue + */ +struct cmdQ { + atomic_t asleep; /* HW DMA Fetch status */ + atomic_t credits; /* # available descriptors for TX */ + atomic_t pio_pidx; /* Variable updated on Doorbell */ + u16 entries_n; /* # descriptors for TX */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ +}; + +struct freelQ { + unsigned int credits; /* # of available RX buffers */ + unsigned int entries_n; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u16 rx_buffer_size; /* Buffer size on this free list */ + u16 dma_offset; /* DMA offset to align IP headers */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist conext descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ +}; + +struct respQ { + u16 credits; /* # of available respQ descriptors */ + u16 credits_pend; /* # of not yet returned descriptors */ + u16 entries_n; /* # of response Q descriptors */ + u16 pidx; /* producer index (HW) */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ + struct respQ_e *entries; /* HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* + * Main SGE data structure + * + * Interrupts are handled by a single CPU and it is likely that on a MP system + * the application is migrated to another CPU. In that scenario, we try to + * seperate the RX(in irq context) and TX state in order to decrease memory + * contention. + */ +struct sge { + struct adapter *adapter; /* adapter backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */ + struct respQ respQ; /* response Q instatiation */ + unsigned int rx_pkt_pad; /* RX padding for L2 packets */ + unsigned int jumbo_fl; /* jumbo freelist Q index */ + u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */ + u32 currIndex; /* current index into intrtimer[] */ + u32 intrtimer_nres; /* no resource interrupt timer value */ + u32 sge_control; /* shadow content of sge control reg */ + struct sge_intr_counts intr_cnt; + struct timer_list ptimer; + struct sk_buff *pskb; + u32 ptimeout; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/ +}; + +static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid); + +/* + * PIO to indicate that memory mapped Q contains valid descriptor(s). + */ +static inline void doorbell_pio(struct sge *sge, u32 val) +{ + wmb(); + t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val); +} + +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0); + t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->ptimer); +} + +static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; +static void t1_espi_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; + struct sge *sge = adapter->sge; + + if (netif_running(adapter->port[0].dev) && + atomic_read(&sge->cmdQ[0].asleep)) { + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && sge->pskb) { + struct sk_buff *skb = sge->pskb; + if (!skb->cb[0]) { + memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN); + memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN); + + skb->cb[0] = 0xff; + } + t1_sge_tx(skb, adapter,0); + } + } + mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout); +} + +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control); + t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ + if (is_T2(sge->adapter)) { + init_timer(&sge->ptimer); + sge->ptimer.function = (void *)&t1_espi_workaround; + sge->ptimer.data = (unsigned long)sge->adapter; + sge->ptimer.expires = jiffies + sge->ptimeout; + add_timer(&sge->ptimer); + } +} + +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + if (is_T2(adapter)) + sge->ptimeout = 1; /* finest allowed */ + + sge->adapter = adapter; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = SGE_INTRTIMER1; + p->last_rx_coalesce_raw = SGE_INTRTIMER1 * + (board_info(sge->adapter)->clock_core / 1000000); + p->default_rx_coalesce_usecs = SGE_INTRTIMER1; + p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */ + p->sample_interval_usecs = 0; + return sge; +} + +/* + * Frees all RX buffers on the freelist Q. The caller must make sure that + * the SGE is turned off before calling this function. + */ +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q) +{ + unsigned int cidx = Q->cidx, credits = Q->credits; + + while (credits--) { + struct freelQ_ce *ce = &Q->centries[cidx]; + + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(ce->skb); + ce->skb = NULL; + if (++cidx == Q->entries_n) + cidx = 0; + } +} + +/* + * Free RX free list and response queue resources. + */ +static void free_rx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + if (sge->respQ.entries) { + size = sizeof(struct respQ_e) * sge->respQ.entries_n; + pci_free_consistent(pdev, size, sge->respQ.entries, + sge->respQ.dma_addr); + } + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *Q = &sge->freelQ[i]; + + if (Q->centries) { + free_freelQ_buffers(pdev, Q); + kfree(Q->centries); + } + if (Q->entries) { + size = sizeof(struct freelQ_e) * Q->entries_n; + pci_free_consistent(pdev, size, Q->entries, + Q->dma_addr); + } + } +} + +/* + * Allocates basic RX resources, consisting of memory mapped freelist Qs and a + * response Q. + */ +static int alloc_rx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_FREELQ_N; i++) { + struct freelQ *Q = &sge->freelQ[i]; + + Q->genbit = 1; + Q->entries_n = p->freelQ_size[i]; + Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad; + size = sizeof(struct freelQ_e) * Q->entries_n; + Q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &Q->dma_addr); + if (!Q->entries) + goto err_no_mem; + memset(Q->entries, 0, size); + Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce), + GFP_KERNEL); + if (!Q->centries) + goto err_no_mem; + } + + /* + * Calculate the buffer sizes for the two free lists. FL0 accommodates + * regular sized Ethernet frames, FL1 is sized not to exceed 16K, + * including all the sk_buff overhead. + * + * Note: For T2 FL0 and FL1 are reversed. + */ + sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE + + sizeof(struct cpl_rx_data) + + sge->freelQ[!sge->jumbo_fl].dma_offset; + sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + + sge->respQ.genbit = 1; + sge->respQ.entries_n = SGE_RESPQ_E_N; + sge->respQ.credits = SGE_RESPQ_E_N; + size = sizeof(struct respQ_e) * sge->respQ.entries_n; + sge->respQ.entries = (struct respQ_e *) + pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); + if (!sge->respQ.entries) + goto err_no_mem; + memset(sge->respQ.entries, 0, size); + return 0; + +err_no_mem: + free_rx_resources(sge); + return -ENOMEM; +} + +/* + * Frees 'credits_pend' TX buffers and returns the credits to Q->credits. + * + * The adaptive algorithm receives the total size of the buffers freed + * accumulated in @*totpayload. No initialization of this argument here. + * + */ +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q, + unsigned int credits_pend, unsigned int *totpayload) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct sk_buff *skb; + struct cmdQ_ce *ce, *cq = Q->centries; + unsigned int entries_n = Q->entries_n, cidx = Q->cidx, + i = credits_pend; + + + ce = &cq[cidx]; + while (i--) { + if (ce->single) + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_TODEVICE); + if (totpayload) + *totpayload += pci_unmap_len(ce, dma_len); + + skb = ce->skb; + if (skb) + dev_kfree_skb_irq(skb); + + ce++; + if (++cidx == entries_n) { + cidx = 0; + ce = cq; + } + } + + Q->cidx = cidx; + atomic_add(credits_pend, &Q->credits); +} + +/* + * Free TX resources. + * + * Assumes that SGE is stopped and all interrupts are disabled. + */ +static void free_tx_resources(struct sge *sge) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *Q = &sge->cmdQ[i]; + + if (Q->centries) { + unsigned int pending = Q->entries_n - + atomic_read(&Q->credits); + + if (pending) + free_cmdQ_buffers(sge, Q, pending, NULL); + kfree(Q->centries); + } + if (Q->entries) { + size = sizeof(struct cmdQ_e) * Q->entries_n; + pci_free_consistent(pdev, size, Q->entries, + Q->dma_addr); + } + } +} + +/* + * Allocates basic TX resources, consisting of memory mapped command Qs. + */ +static int alloc_tx_resources(struct sge *sge, struct sge_params *p) +{ + struct pci_dev *pdev = sge->adapter->pdev; + unsigned int size, i; + + for (i = 0; i < SGE_CMDQ_N; i++) { + struct cmdQ *Q = &sge->cmdQ[i]; + + Q->genbit = 1; + Q->entries_n = p->cmdQ_size[i]; + atomic_set(&Q->credits, Q->entries_n); + atomic_set(&Q->asleep, 1); + spin_lock_init(&Q->Qlock); + size = sizeof(struct cmdQ_e) * Q->entries_n; + Q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &Q->dma_addr); + if (!Q->entries) + goto err_no_mem; + memset(Q->entries, 0, size); + Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce), + GFP_KERNEL); + if (!Q->centries) + goto err_no_mem; + } + + return 0; + +err_no_mem: + free_tx_resources(sge); + return -ENOMEM; +} + +static inline void setup_ring_params(struct adapter *adapter, u64 addr, + u32 size, int base_reg_lo, + int base_reg_hi, int size_reg) +{ + t1_write_reg_4(adapter, base_reg_lo, (u32)addr); + t1_write_reg_4(adapter, base_reg_hi, addr >> 32); + t1_write_reg_4(adapter, size_reg, size); +} + +/* + * Enable/disable VLAN acceleration. + */ +void t1_set_vlan_accel(struct adapter *adapter, int on_off) +{ + struct sge *sge = adapter->sge; + + sge->sge_control &= ~F_VLAN_XTRACT; + if (on_off) + sge->sge_control |= F_VLAN_XTRACT; + if (adapter->open_device_map) { + t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control); + t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */ + } +} + +/* + * Sets the interrupt latency timer when the adaptive Rx coalescing + * is turned off. Do nothing when it is turned on again. + * + * This routine relies on the fact that the caller has already set + * the adaptive policy in adapter->sge_params before calling it. +*/ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + if (!p->coalesce_enable) { + u32 newTimer = p->rx_coalesce_usecs * + (board_info(sge->adapter)->clock_core / 1000000); + + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer); + } + return 0; +} + +/* + * Programs the various SGE registers. However, the engine is not yet enabled, + * but sge->sge_control is setup and ready to go. + */ +static void configure_sge(struct sge *sge, struct sge_params *p) +{ + struct adapter *ap = sge->adapter; + int i; + + t1_write_reg_4(ap, A_SG_CONTROL, 0); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n, + A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n, + A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); + setup_ring_params(ap, sge->freelQ[0].dma_addr, + sge->freelQ[0].entries_n, A_SG_FL0BASELWR, + A_SG_FL0BASEUPR, A_SG_FL0SIZE); + setup_ring_params(ap, sge->freelQ[1].dma_addr, + sge->freelQ[1].entries_n, A_SG_FL1BASELWR, + A_SG_FL1BASEUPR, A_SG_FL1SIZE); + + /* The threshold comparison uses <. */ + t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1); + + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n); + + sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | + F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | + V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + V_RX_PKT_OFFSET(sge->rx_pkt_pad); + +#if defined(__BIG_ENDIAN_BITFIELD) + sge->sge_control |= F_ENABLE_BIG_ENDIAN; +#endif + + /* + * Initialize the SGE Interrupt Timer arrray: + * intrtimer[0] = (SGE_INTRTIMER0) usec + * intrtimer[0intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000; + for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) { + sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i); + sge->intrtimer[i] *= sge->intrtimer[0]; + } + for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) { + sge->intrtimer[i] = (i - 3) * 6; + sge->intrtimer[i] *= sge->intrtimer[0]; + } + sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] = + sge->intrtimer[0] * SGE_INTRTIMER1; + /* Initialize resource timer */ + sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES; + /* Finally finish initialization of intrtimer[0] */ + sge->intrtimer[0] *= SGE_INTRTIMER0; + /* Initialize for a throughput oriented workload */ + sge->currIndex = SGE_INTR_MAXBUCKETS - 1; + + if (p->coalesce_enable) + t1_write_reg_4(ap, A_SG_INTRTIMER, + sge->intrtimer[sge->currIndex]); + else + t1_sge_set_coalesce_params(sge, p); +} + +/* + * Return the payload capacity of the jumbo free-list buffers. + */ +static inline unsigned int jumbo_payload_capacity(const struct sge *sge) +{ + return sge->freelQ[sge->jumbo_fl].rx_buffer_size - + sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad; +} + +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) +{ + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} + +/* + * Frees all SGE related resources and the sge structure itself + */ +void t1_sge_destroy(struct sge *sge) +{ + if (sge->pskb) + dev_kfree_skb(sge->pskb); + free_tx_resources(sge); + free_rx_resources(sge); + kfree(sge); +} + +/* + * Allocates new RX buffers on the freelist Q (and tracks them on the freelist + * context Q) until the Q is full or alloc_skb fails. + * + * It is possible that the generation bits already match, indicating that the + * buffer is already valid and nothing needs to be done. This happens when we + * copied a received buffer into a new sk_buff during the interrupt processing. + * + * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad), + * we specify a RX_OFFSET in order to make sure that the IP header is 4B + * aligned. + */ +static void refill_free_list(struct sge *sge, struct freelQ *Q) +{ + struct pci_dev *pdev = sge->adapter->pdev; + struct freelQ_ce *ce = &Q->centries[Q->pidx]; + struct freelQ_e *e = &Q->entries[Q->pidx]; + unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset; + + + while (Q->credits < Q->entries_n) { + if (e->GenerationBit != Q->genbit) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + if (Q->dma_offset) + skb_reserve(skb, Q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->AddrLow = (u32)mapping; + e->AddrHigh = (u64)mapping >> 32; + e->BufferLength = dma_len; + e->GenerationBit = e->GenerationBit2 = Q->genbit; + } + + e++; + ce++; + if (++Q->pidx == Q->entries_n) { + Q->pidx = 0; + Q->genbit ^= 1; + ce = Q->centries; + e = Q->entries; + } + Q->credits++; + } + +} + +/* + * Calls refill_free_list for both freelist Qs. If we cannot + * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order + * to give the system time to free up resources. + */ +static void freelQs_empty(struct sge *sge) +{ + u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE); + u32 irqholdoff_reg; + + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) { + irq_reg |= F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer[sge->currIndex]; + } else { + /* Clear the F_FL_EXHAUSTED interrupts for now */ + irq_reg &= ~F_FL_EXHAUSTED; + irqholdoff_reg = sge->intrtimer_nres; + } + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg); + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg); + + /* We reenable the Qs to force a freelist GTS interrupt later */ + doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE); +} + +#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) +#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) +#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \ + F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH) + +/* + * Disable SGE Interrupts + */ +void t1_sge_intr_disable(struct sge *sge) +{ + u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + + t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK); + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0); +} + +/* + * Enable SGE interrupts. + */ +void t1_sge_intr_enable(struct sge *sge) +{ + u32 en = SGE_INT_ENABLE; + u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + + if (sge->adapter->flags & TSO_CAPABLE) + en &= ~F_PACKET_TOO_BIG; + t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en); + t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK); +} + +/* + * Clear SGE interrupts. + */ +void t1_sge_intr_clear(struct sge *sge) +{ + t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK); + t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff); +} + +/* + * SGE 'Error' interrupt handler + */ +int t1_sge_intr_error_handler(struct sge *sge) +{ + struct adapter *adapter = sge->adapter; + u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE); + + if (adapter->flags & TSO_CAPABLE) + cause &= ~F_PACKET_TOO_BIG; + if (cause & F_RESPQ_EXHAUSTED) + sge->intr_cnt.respQ_empty++; + if (cause & F_RESPQ_OVERFLOW) { + sge->intr_cnt.respQ_overflow++; + CH_ALERT("%s: SGE response queue overflow\n", + adapter->name); + } + if (cause & F_FL_EXHAUSTED) { + sge->intr_cnt.freelistQ_empty++; + freelQs_empty(sge); + } + if (cause & F_PACKET_TOO_BIG) { + sge->intr_cnt.pkt_too_big++; + CH_ALERT("%s: SGE max packet size exceeded\n", + adapter->name); + } + if (cause & F_PACKET_MISMATCH) { + sge->intr_cnt.pkt_mismatch++; + CH_ALERT("%s: SGE packet mismatch\n", adapter->name); + } + if (cause & SGE_INT_FATAL) + t1_fatal_err(adapter); + + t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause); + return 0; +} + +/* + * The following code is copied from 2.6, where the skb_pull is doing the + * right thing and only pulls ETH_HLEN. + * + * Determine the packet's protocol ID. The rule here is that we + * assume 802.3 if the type field is short enough to be a length. + * This is normal practice and works for any 'now in use' protocol. + */ +static unsigned short sge_eth_type_trans(struct sk_buff *skb, + struct net_device *dev) +{ + struct ethhdr *eth; + unsigned char *rawp; + + skb->mac.raw = skb->data; + skb_pull(skb, ETH_HLEN); + eth = (struct ethhdr *)skb->mac.raw; + + if (*eth->h_dest&1) { + if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } + + /* + * This ALLMULTI check should be redundant by 1.4 + * so don't forget to remove it. + * + * Seems, you forgot to remove it. All silly devices + * seems to set IFF_PROMISC. + */ + + else if (1 /*dev->flags&IFF_PROMISC*/) + { + if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) + skb->pkt_type=PACKET_OTHERHOST; + } + + if (ntohs(eth->h_proto) >= 1536) + return eth->h_proto; + + rawp = skb->data; + + /* + * This is a magic hack to spot IPX packets. Older Novell breaks + * the protocol design and runs IPX over 802.3 without an 802.2 LLC + * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This + * won't work for fault tolerant netware but does for the rest. + */ + if (*(unsigned short *)rawp == 0xFFFF) + return htons(ETH_P_802_3); + + /* + * Real 802.2 LLC + */ + return htons(ETH_P_802_2); +} + +/* + * Prepare the received buffer and pass it up the stack. If it is small enough + * and allocation doesn't fail, we use a new sk_buff and copy the content. + */ +static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q, + unsigned int len, unsigned int offload) +{ + struct sk_buff *skb; + struct adapter *adapter = sge->adapter; + struct freelQ_ce *ce = &Q->centries[Q->cidx]; + + if (len <= SGE_RX_COPY_THRESHOLD && + (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) { + struct freelQ_e *e; + char *src = ce->skb->data; + + pci_dma_sync_single_for_cpu(adapter->pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + if (!offload) { + skb_reserve(skb, NET_IP_ALIGN); + src += sge->rx_pkt_pad; + } + memcpy(skb->data, src, len); + + /* Reuse the entry. */ + e = &Q->entries[Q->cidx]; + e->GenerationBit ^= 1; + e->GenerationBit2 ^= 1; + } else { + pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + skb = ce->skb; + if (!offload && sge->rx_pkt_pad) + __skb_pull(skb, sge->rx_pkt_pad); + } + + skb_put(skb, len); + + + if (unlikely(offload)) { + { + printk(KERN_ERR + "%s: unexpected offloaded packet, cmd %u\n", + adapter->name, *skb->data); + dev_kfree_skb_any(skb); + } + } else { + struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data; + + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = sge_eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || + skb->data[9] == IPPROTO_UDP)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb->ip_summed = CHECKSUM_NONE; + if (adapter->vlan_grp && p->vlan_valid) + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + netif_rx(skb); + } + + if (++Q->cidx == Q->entries_n) + Q->cidx = 0; + + if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, Q); + return 1; +} + + +/* + * Adaptive interrupt timer logic to keep the CPU utilization to + * manageable levels. Basically, as the Average Packet Size (APS) + * gets higher, the interrupt latency setting gets longer. Every + * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the + * base value of SGE_INTRTIMER0. At large values of payload the + * latency hits the ceiling value of SGE_INTRTIMER1 stored at + * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[]. + * + * sge->currIndex caches the last index to save unneeded PIOs. + */ +static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload) +{ + unsigned int newIndex; + + newIndex = avg_payload / SGE_INTR_BUCKETSIZE; + if (newIndex > SGE_INTR_MAXBUCKETS - 1) { + newIndex = SGE_INTR_MAXBUCKETS - 1; + } + /* Save a PIO with this check....maybe */ + if (newIndex != sge->currIndex) { + t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, + sge->intrtimer[newIndex]); + sge->currIndex = newIndex; + sge->adapter->params.sge.last_rx_coalesce_raw = + sge->intrtimer[newIndex]; + } +} + +/* + * Returns true if command queue q_num has enough available descriptors that + * we can resume Tx operation after temporarily disabling its packet queue. + */ +static inline int enough_free_Tx_descs(struct sge *sge, int q_num) +{ + return atomic_read(&sge->cmdQ[q_num].credits) > + (sge->cmdQ[q_num].entries_n >> 2); +} + +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + struct net_device *netdev; + struct adapter *adapter = cookie; + struct sge *sge = adapter->sge; + struct respQ *Q = &sge->respQ; + unsigned int credits = Q->credits, flags = 0, ret = 0; + unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0; + unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 }; + + struct respQ_e *e = &Q->entries[Q->cidx]; + prefetch(e); + + t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA); + + + while (e->GenerationBit == Q->genbit) { + if (--credits < SGE_RESPQ_REPLENISH_THRES) { + u32 n = Q->entries_n - credits - 1; + + t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n); + credits += n; + } + if (likely(e->DataValid)) { + if (!e->Sop || !e->Eop) + BUG(); + t1_sge_rx(sge, &sge->freelQ[e->FreelistQid], + e->BufferLength, e->Offload); + tot_rxpayload += e->BufferLength; + ++n_rx; + } + flags |= e->Qsleeping; + credits_pend[0] += e->Cmdq0CreditReturn; + credits_pend[1] += e->Cmdq1CreditReturn; + +#ifdef CONFIG_SMP + /* + * If enough cmdQ0 buffers have finished DMAing free them so + * anyone that may be waiting for their release can continue. + * We do this only on MP systems to allow other CPUs to proceed + * promptly. UP systems can wait for the free_cmdQ_buffers() + * calls after this loop as the sole CPU is currently busy in + * this loop. + */ + if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) { + free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], + &tot_txpayload); + n_tx += credits_pend[0]; + credits_pend[0] = 0; + } +#endif + ret++; + e++; + if (unlikely(++Q->cidx == Q->entries_n)) { + Q->cidx = 0; + Q->genbit ^= 1; + e = Q->entries; + } + } + + Q->credits = credits; + t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx); + + if (credits_pend[0]) + free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload); + if (credits_pend[1]) + free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload); + + /* Do any coalescing and interrupt latency timer adjustments */ + if (adapter->params.sge.coalesce_enable) { + unsigned int avg_txpayload = 0, avg_rxpayload = 0; + + n_tx += credits_pend[0] + credits_pend[1]; + + /* + * Choose larger avg. payload size to increase + * throughput and reduce [CPU util., intr/s.] + * + * Throughput behavior favored in mixed-mode. + */ + if (n_tx) + avg_txpayload = tot_txpayload/n_tx; + if (n_rx) + avg_rxpayload = tot_rxpayload/n_rx; + + if (n_tx && avg_txpayload > avg_rxpayload){ + update_intr_timer(sge, avg_txpayload); + } else if (n_rx) { + update_intr_timer(sge, avg_rxpayload); + } + } + + if (flags & F_CMDQ0_ENABLE) { + struct cmdQ *cmdQ = &sge->cmdQ[0]; + + atomic_set(&cmdQ->asleep, 1); + if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) { + doorbell_pio(sge, F_CMDQ0_ENABLE); + atomic_set(&cmdQ->pio_pidx, cmdQ->pidx); + } + } + if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE))) + freelQs_empty(sge); + + netdev = adapter->port[0].dev; + if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && + enough_free_Tx_descs(sge, 0) && + enough_free_Tx_descs(sge, 1))) { + netif_wake_queue(netdev); + } + if (unlikely(!ret)) + ret = t1_slow_intr_handler(adapter); + + return IRQ_RETVAL(ret != 0); +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + */ +static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid) +{ + struct sge *sge = adapter->sge; + struct cmdQ *Q = &sge->cmdQ[qid]; + struct cmdQ_e *e; + struct cmdQ_ce *ce; + dma_addr_t mapping; + unsigned int credits, pidx, genbit; + + unsigned int count = 1 + skb_shinfo(skb)->nr_frags; + + /* + * Coming from the timer + */ + if ((skb == sge->pskb)) { + /* + * Quit if any cmdQ activities + */ + if (!spin_trylock(&Q->Qlock)) + return 0; + if (atomic_read(&Q->credits) != Q->entries_n) { + spin_unlock(&Q->Qlock); + return 0; + } + } + else + spin_lock(&Q->Qlock); + + genbit = Q->genbit; + pidx = Q->pidx; + credits = atomic_read(&Q->credits); + + credits -= count; + atomic_sub(count, &Q->credits); + Q->pidx += count; + if (Q->pidx >= Q->entries_n) { + Q->pidx -= Q->entries_n; + Q->genbit ^= 1; + } + + if (unlikely(credits < (MAX_SKB_FRAGS + 1))) { + sge->intr_cnt.cmdQ_full[qid]++; + netif_stop_queue(adapter->port[0].dev); + } + spin_unlock(&Q->Qlock); + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &Q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); + ce->single = 1; + + e = &Q->entries[pidx]; + e->Sop = 1; + e->DataValid = 1; + e->BufferLength = skb->len - skb->data_len; + e->AddrHigh = (u64)mapping >> 32; + e->AddrLow = (u32)mapping; + + if (--count > 0) { + unsigned int i; + + e->Eop = 0; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + + for (i = 0; i < count; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + ce++; e++; + if (++pidx == Q->entries_n) { + pidx = 0; + genbit ^= 1; + ce = Q->centries; + e = Q->entries; + } + + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, + frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + ce->single = 0; + + e->Sop = 0; + e->DataValid = 1; + e->BufferLength = frag->size; + e->AddrHigh = (u64)mapping >> 32; + e->AddrLow = (u32)mapping; + + if (i < count - 1) { + e->Eop = 0; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + } + } + } + + if (skb != sge->pskb) + ce->skb = skb; + e->Eop = 1; + wmb(); + e->GenerationBit = e->GenerationBit2 = genbit; + + /* + * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring + * the doorbell if the Q is asleep. There is a natural race, where + * the hardware is going to sleep just after we checked, however, + * then the interrupt handler will detect the outstanding TX packet + * and ring the doorbell for us. + */ + if (qid) { + doorbell_pio(sge, F_CMDQ1_ENABLE); + } else if (atomic_read(&Q->asleep)) { + atomic_set(&Q->asleep, 0); + doorbell_pio(sge, F_CMDQ0_ENABLE); + atomic_set(&Q->pio_pidx, Q->pidx); + } + return 0; +} + +#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) + +/* + * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. + */ +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct adapter *adapter = dev->priv; + struct cpl_tx_pkt *cpl; + struct ethhdr *eth; + size_t max_len; + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. Complain + * when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR + "%s: Tx packet has inadequate headroom\n", + dev->name); + skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } + + if (skb_shinfo(skb)->tso_size) { + int eth_type; + struct cpl_tx_pkt_lso *hdr; + + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? + CPL_ETH_II : CPL_ETH_II_VLAN; + + hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr)); + hdr->opcode = CPL_TX_PKT_LSO; + hdr->ip_csum_dis = hdr->l4_csum_dis = 0; + hdr->ip_hdr_words = skb->nh.iph->ihl; + hdr->tcp_hdr_words = skb->h.th->doff; + hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type, + skb_shinfo(skb)->tso_size)); + hdr->len = htonl(skb->len - sizeof(*hdr)); + cpl = (struct cpl_tx_pkt *)hdr; + } else + { + /* + * An Ethernet packet must have at least space for + * the DIX Ethernet header and be no greater than + * the device set MTU. Otherwise trash the packet. + */ + if (skb->len < ETH_HLEN) + goto t1_start_xmit_fail2; + eth = (struct ethhdr *)skb->data; + if (eth->h_proto == htons(ETH_P_8021Q)) + max_len = dev->mtu + VLAN_ETH_HLEN; + else + max_len = dev->mtu + ETH_HLEN; + if (skb->len > max_len) + goto t1_start_xmit_fail2; + + if (!(adapter->flags & UDP_CSUM_CAPABLE) && + skb->ip_summed == CHECKSUM_HW && + skb->nh.iph->protocol == IPPROTO_UDP && + skb_checksum_help(skb, 0)) + goto t1_start_xmit_fail3; + + + if (!adapter->sge->pskb) { + if (skb->protocol == htons(ETH_P_ARP) && + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) + adapter->sge->pskb = skb; + } + cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl)); + cpl->opcode = CPL_TX_PKT; + cpl->ip_csum_dis = 1; /* SW calculates IP csum */ + cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; + /* the length field isn't used so don't bother setting it */ + } + cpl->iff = dev->if_port; + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { + cpl->vlan_valid = 1; + cpl->vlan = htons(vlan_tx_tag_get(skb)); + } else +#endif + cpl->vlan_valid = 0; + + dev->trans_start = jiffies; + return t1_sge_tx(skb, adapter, 0); + +t1_start_xmit_fail3: + printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name); + goto t1_start_xmit_fail1; + +t1_start_xmit_fail2: + printk(KERN_INFO "%s: Invalid packet length %d, dropping\n", + dev->name, skb->len); + +t1_start_xmit_fail1: + dev_kfree_skb_any(skb); + return 0; +} + +void t1_sge_set_ptimeout(adapter_t *adapter, u32 val) +{ + struct sge *sge = adapter->sge; + + if (is_T2(adapter)) + sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1); +} + +u32 t1_sge_get_ptimeout(adapter_t *adapter) +{ + struct sge *sge = adapter->sge; + + return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0); +} + diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h new file mode 100644 index 00000000000..140f896def6 --- /dev/null +++ b/drivers/net/chelsio/sge.h @@ -0,0 +1,79 @@ +/***************************************************************************** + * * + * File: sge.h * + * $Revision: 1.7 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _CHELSIO_LINUX_SGE_H_ +#define _CHELSIO_LINUX_SGE_H_ + +#include +#include +#include + +struct sge_intr_counts { + unsigned int respQ_empty; /* # times respQ empty */ + unsigned int respQ_overflow; /* # respQ overflow (fatal) */ + unsigned int freelistQ_empty; /* # times freelist empty */ + unsigned int pkt_too_big; /* packet too large (fatal) */ + unsigned int pkt_mismatch; + unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */ +}; + +struct sk_buff; +struct net_device; +struct cxgbdev; +struct adapter; +struct sge_params; +struct sge; + +struct sge *t1_sge_create(struct adapter *, struct sge_params *); +int t1_sge_configure(struct sge *, struct sge_params *); +int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); +void t1_sge_destroy(struct sge *); +irqreturn_t t1_interrupt(int, void *, struct pt_regs *); +int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); +void t1_set_vlan_accel(struct adapter *adapter, int on_off); +void t1_sge_start(struct sge *); +void t1_sge_stop(struct sge *); +int t1_sge_intr_error_handler(struct sge *); +void t1_sge_intr_enable(struct sge *); +void t1_sge_intr_disable(struct sge *); +void t1_sge_intr_clear(struct sge *); + +void t1_sge_set_ptimeout(adapter_t *adapter, u32 val); +u32 t1_sge_get_ptimeout(adapter_t *adapter); + +#endif /* _CHELSIO_LINUX_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c new file mode 100644 index 00000000000..a90a3f95fca --- /dev/null +++ b/drivers/net/chelsio/subr.c @@ -0,0 +1,831 @@ +/***************************************************************************** + * * + * File: subr.c * + * $Revision: 1.12 $ * + * $Date: 2005/03/23 07:41:27 $ * + * Description: * + * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "elmer0.h" +#include "regs.h" + +#include "gmac.h" +#include "cphy.h" +#include "sge.h" +#include "tp.h" +#include "espi.h" + +/** + * t1_wait_op_done - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. Returns %0 if the operation completes and %1 + * otherwise. + */ +static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, + int attempts, int delay) +{ + while (1) { + u32 val = t1_read_reg_4(adapter, reg) & mask; + + if (!!val == polarity) + return 0; + if (--attempts == 0) + return 1; + if (delay) + udelay(delay); + } +} + +#define TPI_ATTEMPTS 50 + +/* + * Write a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int tpi_busy; + + t1_write_reg_4(adapter, A_TPI_ADDR, addr); + t1_write_reg_4(adapter, A_TPI_WR_DATA, value); + t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI write to 0x%x failed\n", + adapter->name, addr); + return tpi_busy; +} + +int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) +{ + int ret; + + TPI_LOCK(adapter); + ret = __t1_tpi_write(adapter, addr, value); + TPI_UNLOCK(adapter); + return ret; +} + +/* + * Read a register over the TPI interface (unlocked and locked versions). + */ +static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int tpi_busy; + + t1_write_reg_4(adapter, A_TPI_ADDR, addr); + t1_write_reg_4(adapter, A_TPI_CSR, 0); + + tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, + TPI_ATTEMPTS, 3); + if (tpi_busy) + CH_ALERT("%s: TPI read from 0x%x failed\n", + adapter->name, addr); + else + *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA); + return tpi_busy; +} + +int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) +{ + int ret; + + TPI_LOCK(adapter); + ret = __t1_tpi_read(adapter, addr, valp); + TPI_UNLOCK(adapter); + return ret; +} + +/* + * Set a TPI parameter. + */ +static void t1_tpi_par(adapter_t *adapter, u32 value) +{ + t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value)); +} + +/* + * Called when a port's link settings change to propagate the new values to the + * associated PHY and MAC. After performing the common tasks it invokes an + * OS-specific handler. + */ +/* static */ void link_changed(adapter_t *adapter, int port_id) +{ + int link_ok, speed, duplex, fc; + struct cphy *phy = adapter->port[port_id].phy; + struct link_config *lc = &adapter->port[port_id].link_config; + + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); + + lc->speed = speed < 0 ? SPEED_INVALID : speed; + lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex; + if (!(lc->requested_fc & PAUSE_AUTONEG)) + fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) { + /* Set MAC speed, duplex, and flow control to match PHY. */ + struct cmac *mac = adapter->port[port_id].mac; + + mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc); + lc->fc = (unsigned char)fc; + } + t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc); +} + +static int t1_pci_intr_handler(adapter_t *adapter) +{ + u32 pcix_cause; + + pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause); + + if (pcix_cause) { + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, + pcix_cause); + t1_fatal_err(adapter); /* PCI errors are fatal */ + } + return 0; +} + + +/* + * Wait until Elmer's MI1 interface is ready for new operations. + */ +static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg) +{ + int attempts = 100, busy; + + do { + u32 val; + + __t1_tpi_read(adapter, mi1_reg, &val); + busy = val & F_MI1_OP_BUSY; + if (busy) + udelay(10); + } while (busy && --attempts); + if (busy) + CH_ALERT("%s: MDIO operation timed out\n", + adapter->name); + return busy; +} + +/* + * MI1 MDIO initialization. + */ +static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi) +{ + u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1; + u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) | + V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv); + + if (!(bi->caps & SUPPORTED_10000baseT_Full)) + val |= V_MI1_SOF(1); + t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val); +} + +static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + TPI_LOCK(adapter); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the operation we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Read the data. */ + __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); + TPI_UNLOCK(adapter); + return 0; +} + +static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int val) +{ + u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); + + TPI_LOCK(adapter); + + /* Write the address we want. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, + MI1_OP_INDIRECT_ADDRESS); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + + /* Write the data. */ + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); + __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); + mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); + TPI_UNLOCK(adapter); + return 0; +} + +static struct mdio_ops mi1_mdio_ext_ops = { + mi1_mdio_init, + mi1_mdio_ext_read, + mi1_mdio_ext_write +}; + +enum { + CH_BRD_N110_1F, + CH_BRD_N210_1F, + CH_BRD_T210_1F, +}; + +static struct board_info t1_board[] = { + +{ CHBT_BOARD_N110, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N110 1x10GBaseX NIC" }, + +{ CHBT_BOARD_N210, 1/*ports#*/, + SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2, + CHBT_MAC_PM3393, CHBT_PHY_88X2010, + 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/, + 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/, + 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops, + &t1_mv88x201x_ops, &mi1_mdio_ext_ops, + "Chelsio N210 1x10GBaseX NIC" }, + +}; + +struct pci_device_id t1_pci_tbl[] = { + CH_DEVICE(7, 0, CH_BRD_N110_1F), + CH_DEVICE(10, 1, CH_BRD_N210_1F), + { 0, } +}; + +/* + * Return the board_info structure with a given index. Out-of-range indices + * return NULL. + */ +const struct board_info *t1_get_board_info(unsigned int board_id) +{ + return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL; +} + +struct chelsio_vpd_t { + u32 format_version; + u8 serial_number[16]; + u8 mac_base_address[6]; + u8 pad[2]; /* make multiple-of-4 size requirement explicit */ +}; + +#define EEPROMSIZE (8 * 1024) +#define EEPROM_MAX_POLL 4 + +/* + * Read SEEPROM. A zero is written to the flag register when the addres is + * written to the Control register. The hardware device will set the flag to a + * one when 4B have been transferred to the Data register. + */ +int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data) +{ + int i = EEPROM_MAX_POLL; + u16 val; + + if (addr >= EEPROMSIZE || (addr & 3)) + return -EINVAL; + + pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr); + do { + udelay(50); + pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val); + } while (!(val & F_VPD_OP_FLAG) && --i); + + if (!(val & F_VPD_OP_FLAG)) { + CH_ERR("%s: reading EEPROM address 0x%x failed\n", + adapter->name, addr); + return -EIO; + } + pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data); + *data = le32_to_cpu(*data); + return 0; +} + +static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd) +{ + int addr, ret = 0; + + for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32)) + ret = t1_seeprom_read(adapter, addr, + (u32 *)((u8 *)vpd + addr)); + + return ret; +} + +/* + * Read a port's MAC address from the VPD ROM. + */ +static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[]) +{ + struct chelsio_vpd_t vpd; + + if (t1_eeprom_vpd_get(adapter, &vpd)) + return 1; + memcpy(mac_addr, vpd.mac_base_address, 5); + mac_addr[5] = vpd.mac_base_address[5] + index; + return 0; +} + +/* + * Set up the MAC/PHY according to the requested link settings. + * + * If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired and reset. + * + * If the PHY does not auto-negotiate we just reset it. + * + * If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc) +{ + unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE); + if (fc) { + lc->advertising |= ADVERTISED_ASYM_PAUSE; + if (fc == (PAUSE_RX | PAUSE_TX)) + lc->advertising |= ADVERTISED_PAUSE; + } + phy->ops->advertise(phy, lc->advertising); + + if (lc->autoneg == AUTONEG_DISABLE) { + lc->speed = lc->requested_speed; + lc->duplex = lc->requested_duplex; + lc->fc = (unsigned char)fc; + mac->ops->set_speed_duplex_fc(mac, lc->speed, + lc->duplex, fc); + /* Also disables autoneg */ + phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex); + phy->ops->reset(phy, 0); + } else + phy->ops->autoneg_enable(phy); /* also resets PHY */ + } else { + mac->ops->set_speed_duplex_fc(mac, -1, -1, fc); + lc->fc = (unsigned char)fc; + phy->ops->reset(phy, 0); + } + return 0; +} + +/* + * External interrupt handler for boards using elmer0. + */ +int elmer0_ext_intr_handler(adapter_t *adapter) +{ + struct cphy *phy; + int phy_cause; + u32 cause; + + t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); + + switch (board_info(adapter)->board) { + case CHBT_BOARD_CHT210: + case CHBT_BOARD_N210: + case CHBT_BOARD_N110: + if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ + phy = adapter->port[0].phy; + phy_cause = phy->ops->interrupt_handler(phy); + if (phy_cause & cphy_cause_link_change) + link_changed(adapter, 0); + } + break; + case CHBT_BOARD_8000: + case CHBT_BOARD_CHT110: + CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", + cause); + if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ + struct cmac *mac = adapter->port[0].mac; + + mac->ops->interrupt_handler(mac); + } + if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ + u32 mod_detect; + + t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); + CH_MSG(adapter, INFO, LINK, "XPAK %s\n", + mod_detect ? "removed" : "inserted"); + } + break; + } + t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); + return 0; +} + +/* Enables all interrupts. */ +void t1_interrupts_enable(adapter_t *adapter) +{ + unsigned int i; + + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; + + t1_sge_intr_enable(adapter->sge); + t1_tp_intr_enable(adapter->tp); + if (adapter->espi) { + adapter->slow_intr_mask |= F_PL_INTR_ESPI; + t1_espi_intr_enable(adapter->espi); + } + + /* Enable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy); + } + + /* Enable PCIX & external chip interrupts on ASIC boards. */ + if (t1_is_asic(adapter)) { + u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); + + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr); + } +} + +/* Disables all interrupts. */ +void t1_interrupts_disable(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_disable(adapter->sge); + t1_tp_intr_disable(adapter->tp); + if (adapter->espi) + t1_espi_intr_disable(adapter->espi); + + /* Disable MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy); + } + + /* Disable PCIX & external chip interrupts. */ + if (t1_is_asic(adapter)) + t1_write_reg_4(adapter, A_PL_ENABLE, 0); + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); + + adapter->slow_intr_mask = 0; +} + +/* Clears all interrupts */ +void t1_interrupts_clear(adapter_t* adapter) +{ + unsigned int i; + + t1_sge_intr_clear(adapter->sge); + t1_tp_intr_clear(adapter->tp); + if (adapter->espi) + t1_espi_intr_clear(adapter->espi); + + /* Clear MAC/PHY interrupts for each port. */ + for_each_port(adapter, i) { + adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac); + adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy); + } + + /* Enable interrupts for external devices. */ + if (t1_is_asic(adapter)) { + u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE); + + t1_write_reg_4(adapter, A_PL_CAUSE, + pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX); + } + + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); +} + +/* + * Slow path interrupt handler for ASICs. + */ +static int asic_slow_intr(adapter_t *adapter) +{ + u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE); + + cause &= adapter->slow_intr_mask; + if (!cause) + return 0; + if (cause & F_PL_INTR_SGE_ERR) + t1_sge_intr_error_handler(adapter->sge); + if (cause & F_PL_INTR_TP) + t1_tp_intr_handler(adapter->tp); + if (cause & F_PL_INTR_ESPI) + t1_espi_intr_handler(adapter->espi); + if (cause & F_PL_INTR_PCIX) + t1_pci_intr_handler(adapter); + if (cause & F_PL_INTR_EXT) + t1_elmer0_ext_intr(adapter); + + /* Clear the interrupts just processed. */ + t1_write_reg_4(adapter, A_PL_CAUSE, cause); + (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */ + return 1; +} + +int t1_slow_intr_handler(adapter_t *adapter) +{ + return asic_slow_intr(adapter); +} + +/* Power sequencing is a work-around for Intel's XPAKs. */ +static void power_sequence_xpak(adapter_t* adapter) +{ + u32 mod_detect; + u32 gpo; + + /* Check for XPAK */ + t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); + if (!(ELMER0_GP_BIT5 & mod_detect)) { + /* XPAK is present */ + t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); + gpo |= ELMER0_GP_BIT18; + t1_tpi_write(adapter, A_ELMER0_GPO, gpo); + } +} + +int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, + struct adapter_params *p) +{ + p->chip_version = bi->chip_term; + p->is_asic = (p->chip_version != CHBT_TERM_FPGA); + if (p->chip_version == CHBT_TERM_T1 || + p->chip_version == CHBT_TERM_T2 || + p->chip_version == CHBT_TERM_FPGA) { + u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG); + + val = G_TP_PC_REV(val); + if (val == 2) + p->chip_revision = TERM_T1B; + else if (val == 3) + p->chip_revision = TERM_T2; + else + return -1; + } else + return -1; + return 0; +} + +/* + * Enable board components other than the Chelsio chip, such as external MAC + * and PHY. + */ +static int board_init(adapter_t *adapter, const struct board_info *bi) +{ + switch (bi->board) { + case CHBT_BOARD_8000: + case CHBT_BOARD_N110: + case CHBT_BOARD_N210: + case CHBT_BOARD_CHT210: + case CHBT_BOARD_COUGAR: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); + break; + case CHBT_BOARD_CHT110: + t1_tpi_par(adapter, 0xf); + t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); + + /* TBD XXX Might not need. This fixes a problem + * described in the Intel SR XPAK errata. + */ + power_sequence_xpak(adapter); + break; + } + return 0; +} + +/* + * Initialize and configure the Terminator HW modules. Note that external + * MAC and PHYs are initialized separately. + */ +int t1_init_hw_modules(adapter_t *adapter) +{ + int err = -EIO; + const struct board_info *bi = board_info(adapter); + + if (!adapter->mc4) { + u32 val = t1_read_reg_4(adapter, A_MC4_CFG); + + t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW); + t1_write_reg_4(adapter, A_MC5_CONFIG, + F_M_BUS_ENABLE | F_TCAM_RESET); + } + + if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, + bi->espi_nports)) + goto out_err; + + if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) + goto out_err; + + err = t1_sge_configure(adapter->sge, &adapter->params.sge); + if (err) + goto out_err; + + err = 0; + out_err: + return err; +} + +/* + * Determine a card's PCI mode. + */ +static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +{ + static unsigned short speed_map[] = { 33, 66, 100, 133 }; + u32 pci_mode; + + pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode); + p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)]; + p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32; + p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0; +} + +/* + * Release the structures holding the SW per-Terminator-HW-module state. + */ +void t1_free_sw_modules(adapter_t *adapter) +{ + unsigned int i; + + for_each_port(adapter, i) { + struct cmac *mac = adapter->port[i].mac; + struct cphy *phy = adapter->port[i].phy; + + if (mac) + mac->ops->destroy(mac); + if (phy) + phy->ops->destroy(phy); + } + + if (adapter->sge) + t1_sge_destroy(adapter->sge); + if (adapter->tp) + t1_tp_destroy(adapter->tp); + if (adapter->espi) + t1_espi_destroy(adapter->espi); +} + +static void __devinit init_link_config(struct link_config *lc, + const struct board_info *bi) +{ + lc->supported = bi->caps; + lc->requested_speed = lc->speed = SPEED_INVALID; + lc->requested_duplex = lc->duplex = DUPLEX_INVALID; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & SUPPORTED_Autoneg) { + lc->advertising = lc->supported; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + + +/* + * Allocate and initialize the data structures that hold the SW state of + * the Terminator HW modules. + */ +int __devinit t1_init_sw_modules(adapter_t *adapter, + const struct board_info *bi) +{ + unsigned int i; + + adapter->params.brd_info = bi; + adapter->params.nports = bi->port_number; + adapter->params.stats_update_period = bi->gmac->stats_update_period; + + adapter->sge = t1_sge_create(adapter, &adapter->params.sge); + if (!adapter->sge) { + CH_ERR("%s: SGE initialization failed\n", + adapter->name); + goto error; + } + + + + if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { + CH_ERR("%s: ESPI initialization failed\n", + adapter->name); + goto error; + } + + adapter->tp = t1_tp_create(adapter, &adapter->params.tp); + if (!adapter->tp) { + CH_ERR("%s: TP initialization failed\n", + adapter->name); + goto error; + } + + board_init(adapter, bi); + bi->mdio_ops->init(adapter, bi); + if (bi->gphy->reset) + bi->gphy->reset(adapter); + if (bi->gmac->reset) + bi->gmac->reset(adapter); + + for_each_port(adapter, i) { + u8 hw_addr[6]; + struct cmac *mac; + int phy_addr = bi->mdio_phybaseaddr + i; + + adapter->port[i].phy = bi->gphy->create(adapter, phy_addr, + bi->mdio_ops); + if (!adapter->port[i].phy) { + CH_ERR("%s: PHY %d initialization failed\n", + adapter->name, i); + goto error; + } + + adapter->port[i].mac = mac = bi->gmac->create(adapter, i); + if (!mac) { + CH_ERR("%s: MAC %d initialization failed\n", + adapter->name, i); + goto error; + } + + /* + * Get the port's MAC addresses either from the EEPROM if one + * exists or the one hardcoded in the MAC. + */ + if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) + mac->ops->macaddress_get(mac, hw_addr); + else if (vpd_macaddress_get(adapter, i, hw_addr)) { + CH_ERR("%s: could not read MAC address from VPD ROM\n", + port_name(adapter, i)); + goto error; + } + t1_set_hw_addr(adapter, i, hw_addr); + init_link_config(&adapter->port[i].link_config, bi); + } + + get_pci_mode(adapter, &adapter->params.pci); + t1_interrupts_clear(adapter); + return 0; + + error: + t1_free_sw_modules(adapter); + return -1; +} diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h new file mode 100644 index 00000000000..98352bdda89 --- /dev/null +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -0,0 +1,221 @@ +/***************************************************************************** + * * + * File: suni1x10gexp_regs.h * + * $Revision: 1.4 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * PMC/SIERRA (pm3393) MAC-PHY functionality. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef _SUNI1x10GEXP_REGS_H +#define _SUNI1x10GEXP_REGS_H + +/******************************************************************************/ +/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ +/******************************************************************************/ +/* Refer to the Register Bit Masks bellow for the naming of each register and */ +/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit */ +/******************************************************************************/ + +#define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004 +#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS 0x000D +#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE 0x000E +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE 0x0102 +#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS 0x0104 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_1 0x2040 +#define SUNI1x10GEXP_REG_RXXG_CONFIG_3 0x2042 +#define SUNI1x10GEXP_REG_RXXG_INTERRUPT 0x2043 +#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH 0x2045 +#define SUNI1x10GEXP_REG_RXXG_SA_15_0 0x2046 +#define SUNI1x10GEXP_REG_RXXG_SA_31_16 0x2047 +#define SUNI1x10GEXP_REG_RXXG_SA_47_32 0x2048 +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW 0x204D +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID 0x204E +#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH 0x204F +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW 0x206A +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW 0x206B +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH 0x206C +#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH 0x206D +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0 0x206E +#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2 0x2070 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE 0x2088 +#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS 0x2089 +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE 0x208B +#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS 0x208C +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE 0x20C7 +#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS 0x20C8 +#define SUNI1x10GEXP_REG_MSTAT_CONTROL 0x2100 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0 0x2101 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1 0x2102 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2 0x2103 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3 0x2104 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0 0x2105 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1 0x2106 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2 0x2107 +#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3 0x2108 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW 0x2110 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW 0x2114 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW 0x2120 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW 0x2124 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW 0x2128 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW 0x2130 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW 0x2138 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW 0x213C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW 0x2140 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW 0x2144 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW 0x214C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW 0x2150 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW 0x2154 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW 0x2158 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW 0x2194 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW 0x219C +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW 0x21A0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW 0x21A8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW 0x21B0 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW 0x21B8 +#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW 0x21BC +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE 0x2209 +#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT 0x220A +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK 0x2282 +#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT 0x2283 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS 0x2300 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE 0x2301 +#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK 0x2302 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_1 0x3040 +#define SUNI1x10GEXP_REG_TXXG_CONFIG_3 0x3042 +#define SUNI1x10GEXP_REG_TXXG_INTERRUPT 0x3043 +#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE 0x3045 +#define SUNI1x10GEXP_REG_TXXG_SA_15_0 0x3047 +#define SUNI1x10GEXP_REG_TXXG_SA_31_16 0x3048 +#define SUNI1x10GEXP_REG_TXXG_SA_47_32 0x3049 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS 0x3084 +#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE 0x3085 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE 0x30C6 +#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS 0x30C7 +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE 0x320C +#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION 0x320D +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK 0x3282 +#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT 0x3283 + +/******************************************************************************/ +/* -- End register offset definitions -- */ +/******************************************************************************/ + +/******************************************************************************/ +/** SUNI-1x10GE-XP REGISTER BIT MASKS **/ +/******************************************************************************/ + +/*---------------------------------------------------------------------------- + * Register 0x0004: S/UNI-1x10GE-XP Device Status + * Bit 9 TOP_SXRA_EXPIRED + * Bit 8 TOP_MDIO_BUSY + * Bit 7 TOP_DTRB + * Bit 6 TOP_EXPIRED + * Bit 5 TOP_PAUSED + * Bit 4 TOP_PL4_ID_DOOL + * Bit 3 TOP_PL4_IS_DOOL + * Bit 2 TOP_PL4_ID_ROOL + * Bit 1 TOP_PL4_IS_ROOL + * Bit 0 TOP_PL4_OUT_ROOL + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED 0x0200 +#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED 0x0040 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL 0x0010 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL 0x0008 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL 0x0004 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL 0x0002 +#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x000E:PM3393 Global interrupt enable + * Bit 15 TOP_INTE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TOP_INTE 0x8000 + +/*---------------------------------------------------------------------------- + * Register 0x2040: RXXG Configuration 1 + * Bit 15 RXXG_RXEN + * Bit 14 RXXG_ROCF + * Bit 13 RXXG_PAD_STRIP + * Bit 10 RXXG_PUREP + * Bit 9 RXXG_LONGP + * Bit 8 RXXG_PARF + * Bit 7 RXXG_FLCHK + * Bit 5 RXXG_PASS_CTRL + * Bit 3 RXXG_CRC_STRIP + * Bit 2-0 RXXG_MIFG + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_RXEN 0x8000 +#define SUNI1x10GEXP_BITMSK_RXXG_PUREP 0x0400 +#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK 0x0080 +#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP 0x0008 + +/*---------------------------------------------------------------------------- + * Register 0x2070: RXXG Address Filter Control 2 + * Bit 1 RXXG_PMODE + * Bit 0 RXXG_MHASH_EN + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_RXXG_PMODE 0x0002 +#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x2100: MSTAT Control + * Bit 2 MSTAT_WRITE + * Bit 1 MSTAT_CLEAR + * Bit 0 MSTAT_SNAP + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR 0x0002 +#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP 0x0001 + +/*---------------------------------------------------------------------------- + * Register 0x3040: TXXG Configuration Register 1 + * Bit 15 TXXG_TXEN0 + * Bit 13 TXXG_HOSTPAUSE + * Bit 12-7 TXXG_IPGT + * Bit 5 TXXG_32BIT_ALIGN + * Bit 4 TXXG_CRCEN + * Bit 3 TXXG_FCTX + * Bit 2 TXXG_FCRX + * Bit 1 TXXG_PADEN + * Bit 0 TXXG_SPRE + *----------------------------------------------------------------------------*/ +#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0 0x8000 +#define SUNI1x10GEXP_BITOFF_TXXG_IPGT 7 +#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN 0x0020 +#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN 0x0010 +#define SUNI1x10GEXP_BITMSK_TXXG_FCTX 0x0008 +#define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 +#define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 + +#endif /* _SUNI1x10GEXP_REGS_H */ + diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c new file mode 100644 index 00000000000..9ad5c539fd2 --- /dev/null +++ b/drivers/net/chelsio/tp.c @@ -0,0 +1,188 @@ +/***************************************************************************** + * * + * File: tp.c * + * $Revision: 1.6 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * Core ASIC Management. * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#include "common.h" +#include "regs.h" +#include "tp.h" + +struct petp { + adapter_t *adapter; +}; + +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + + +static void tp_init(adapter_t *ap, const struct tp_params *p, + unsigned int tp_clk) +{ + if (t1_is_asic(ap)) { + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + if (!p->pm_size) + val |= F_OFFLOAD_DISABLE; + else + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + t1_write_reg_4(ap, A_TP_IN_CONFIG, val); + t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM); + t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) | + F_PATH_MTU /* IP DF bit */ | + V_5TUPLE_LOOKUP(p->use_5tuple_mode) | + V_SYN_COOKIE_PARAMETER(29)); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(ap)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG, + F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT)); + } + + } +} + +void t1_tp_destroy(struct petp *tp) +{ + kfree(tp); +} + +struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p) +{ + struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL); + if (!tp) + return NULL; + memset(tp, 0, sizeof(*tp)); + tp->adapter = adapter; + + return tp; +} + +void t1_tp_intr_enable(struct petp *tp) +{ + u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); + + { + /* We don't use any TP interrupts */ + t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); + t1_write_reg_4(tp->adapter, A_PL_ENABLE, + tp_intr | F_PL_INTR_TP); + } +} + +void t1_tp_intr_disable(struct petp *tp) +{ + u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); + + { + t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); + t1_write_reg_4(tp->adapter, A_PL_ENABLE, + tp_intr & ~F_PL_INTR_TP); + } +} + +void t1_tp_intr_clear(struct petp *tp) +{ + t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff); + t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP); +} + +int t1_tp_intr_handler(struct petp *tp) +{ + u32 cause; + + + cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE); + t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause); + return 0; +} + +static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) +{ + u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val); +} + +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_IP_CSUM, enable); +} + +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_UDP_CSUM, enable); +} + +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) +{ + set_csum_offload(tp, F_TCP_CSUM, enable); +} + +/* + * Initialize TP state. tp_params contains initial settings for some TP + * parameters, particularly the one-time PM and CM settings. + */ +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) +{ + int busy = 0; + adapter_t *adapter = tp->adapter; + + tp_init(adapter, p, tp_clk); + if (!busy) + t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET); + else + CH_ERR("%s: TP initialization timed out\n", + adapter->name); + return busy; +} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h new file mode 100644 index 00000000000..2ebc5c0d62e --- /dev/null +++ b/drivers/net/chelsio/tp.h @@ -0,0 +1,110 @@ +/***************************************************************************** + * * + * File: tp.h * + * $Revision: 1.3 $ * + * $Date: 2005/03/23 07:15:59 $ * + * Description: * + * part of the Chelsio 10Gb Ethernet Driver. * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License, version 2, as * + * published by the Free Software Foundation. * + * * + * You should have received a copy of the GNU General Public License along * + * with this program; if not, write to the Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * + * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * + * * + * http://www.chelsio.com * + * * + * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * + * All rights reserved. * + * * + * Maintainers: maintainers@chelsio.com * + * * + * Authors: Dimitrios Michailidis * + * Tina Yang * + * Felix Marti * + * Scott Bardone * + * Kurt Ottaway * + * Frank DiMambro * + * * + * History: * + * * + ****************************************************************************/ + +#ifndef CHELSIO_TP_H +#define CHELSIO_TP_H + +#include "common.h" + +#define TP_MAX_RX_COALESCING_SIZE 16224U + +struct tp_mib_statistics { + + /* IP */ + u32 ipInReceive_hi; + u32 ipInReceive_lo; + u32 ipInHdrErrors_hi; + u32 ipInHdrErrors_lo; + u32 ipInAddrErrors_hi; + u32 ipInAddrErrors_lo; + u32 ipInUnknownProtos_hi; + u32 ipInUnknownProtos_lo; + u32 ipInDiscards_hi; + u32 ipInDiscards_lo; + u32 ipInDelivers_hi; + u32 ipInDelivers_lo; + u32 ipOutRequests_hi; + u32 ipOutRequests_lo; + u32 ipOutDiscards_hi; + u32 ipOutDiscards_lo; + u32 ipOutNoRoutes_hi; + u32 ipOutNoRoutes_lo; + u32 ipReasmTimeout; + u32 ipReasmReqds; + u32 ipReasmOKs; + u32 ipReasmFails; + + u32 reserved[8]; + + /* TCP */ + u32 tcpActiveOpens; + u32 tcpPassiveOpens; + u32 tcpAttemptFails; + u32 tcpEstabResets; + u32 tcpOutRsts; + u32 tcpCurrEstab; + u32 tcpInSegs_hi; + u32 tcpInSegs_lo; + u32 tcpOutSegs_hi; + u32 tcpOutSegs_lo; + u32 tcpRetransSeg_hi; + u32 tcpRetransSeg_lo; + u32 tcpInErrs_hi; + u32 tcpInErrs_lo; + u32 tcpRtoMin; + u32 tcpRtoMax; +}; + +struct petp; +struct tp_params; + +struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); +void t1_tp_destroy(struct petp *tp); + +void t1_tp_intr_disable(struct petp *tp); +void t1_tp_intr_enable(struct petp *tp); +void t1_tp_intr_clear(struct petp *tp); +int t1_tp_intr_handler(struct petp *tp); + +void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); +void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); +void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); +int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); +int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); +#endif -- cgit v1.2.3-70-g09d2 From 559fb51ba7e66fe298b8355fabde1275b7def35f Mon Sep 17 00:00:00 2001 From: Scott Bardone Date: Thu, 23 Jun 2005 01:40:19 -0400 Subject: Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code. --- Documentation/networking/cxgb.txt | 72 +- drivers/net/chelsio/Makefile | 3 +- drivers/net/chelsio/ch_ethtool.h | 102 -- drivers/net/chelsio/common.h | 259 +++-- drivers/net/chelsio/cphy.h | 14 +- drivers/net/chelsio/cpl5_cmd.h | 118 +- drivers/net/chelsio/cxgb2.c | 537 ++++----- drivers/net/chelsio/cxgb2.h | 122 -- drivers/net/chelsio/elmer0.h | 16 +- drivers/net/chelsio/espi.c | 168 ++- drivers/net/chelsio/espi.h | 11 +- drivers/net/chelsio/gmac.h | 11 +- drivers/net/chelsio/mv88x201x.c | 36 +- drivers/net/chelsio/osdep.h | 169 --- drivers/net/chelsio/pm3393.c | 45 +- drivers/net/chelsio/regs.h | 21 +- drivers/net/chelsio/sge.c | 1859 +++++++++++++++++-------------- drivers/net/chelsio/sge.h | 48 +- drivers/net/chelsio/subr.c | 235 ++-- drivers/net/chelsio/suni1x10gexp_regs.h | 20 +- drivers/net/chelsio/tp.c | 188 ---- drivers/net/chelsio/tp.h | 110 -- include/linux/pci_ids.h | 1 + 23 files changed, 1882 insertions(+), 2283 deletions(-) delete mode 100644 drivers/net/chelsio/ch_ethtool.h delete mode 100644 drivers/net/chelsio/cxgb2.h delete mode 100644 drivers/net/chelsio/osdep.h delete mode 100644 drivers/net/chelsio/tp.c delete mode 100644 drivers/net/chelsio/tp.h (limited to 'drivers') diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt index 9f2eb646c6f..76324638626 100644 --- a/Documentation/networking/cxgb.txt +++ b/Documentation/networking/cxgb.txt @@ -2,9 +2,9 @@ Driver Release Notes for Linux - Version 2.1.0 + Version 2.1.1 - March 8, 2005 + June 20, 2005 CONTENTS ======== @@ -21,8 +21,7 @@ INTRODUCTION This document describes the Linux driver for Chelsio 10Gb Ethernet Network Controller. This driver supports the Chelsio N210 NIC and is backward - compatible with the Chelsio N110 model 10Gb NICs. This driver supports AMD64 - and EM64T, and x86 systems. + compatible with the Chelsio N110 model 10Gb NICs. FEATURES @@ -121,23 +120,17 @@ PERFORMANCE Disabling SACK: sysctl -w net.ipv4.tcp_sack=0 - Setting TCP read buffers (min/default/max): - sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" - - Setting TCP write buffers (min/pressure/max): - sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" - - Setting TCP buffer space (min/pressure/max): - sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" - - Setting large number of incoming connection requests (2.6.x only): + Setting large number of incoming connection requests: sysctl -w net.ipv4.tcp_max_syn_backlog=3000 Setting maximum receive socket buffer size: - sysctl -w net.core.rmem_max=524287 + sysctl -w net.core.rmem_max=1024000 Setting maximum send socket buffer size: - sysctl -w net.core.wmem_max=524287 + sysctl -w net.core.wmem_max=1024000 + + Set smp_affinity (on a multiprocessor system) to a single CPU: + echo 1 > /proc/irq//smp_affinity Setting default receive socket buffer size: sysctl -w net.core.rmem_default=524287 @@ -151,8 +144,14 @@ PERFORMANCE Setting maximum backlog (# of unprocessed packets before kernel drops): sysctl -w net.core.netdev_max_backlog=300000 - Set smp_affinity (on a multiprocessor system) to a single CPU: - echo 00000001 > /proc/irq//smp_affinity + Setting TCP read buffers (min/default/max): + sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" + + Setting TCP write buffers (min/pressure/max): + sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + + Setting TCP buffer space (min/pressure/max): + sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" TCP window size for single connections: The receive buffer (RX_WINDOW) size must be at least as large as the @@ -186,7 +185,7 @@ DRIVER MESSAGES may be found in /var/log/messages. Driver up: - Chelsio Network Driver - version 2.1.0 + Chelsio Network Driver - version 2.1.1 NIC detected: eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit @@ -282,13 +281,44 @@ KNOWN ISSUES the number of outstanding transactions, via BIOS configuration programming of the PCI-X card, to the following: - Data Length (bytes): 2k - Total allowed outstanding transactions: 1 + Data Length (bytes): 1k + Total allowed outstanding transactions: 2 Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004, section 56, "133-MHz Mode Split Completion Data Corruption" for more details with this bug and workarounds suggested by AMD. + It may be possible to work outside AMD's recommended PCI-X settings, try + increasing the Data Length to 2k bytes for increased performance. If you + have issues with these settings, please revert to the "safe" settings + and duplicate the problem before submitting a bug or asking for support. + + NOTE: The default setting on most systems is 8 outstanding transactions + and 2k bytes data length. + + 4. On multiprocessor systems, it has been noted that an application which + is handling 10Gb networking can switch between CPUs causing degraded + and/or unstable performance. + + If running on an SMP system and taking performance measurements, it + is suggested you either run the latest netperf-2.4.0+ or use a binding + tool such as Tim Hockin's procstate utilities (runon) + . + + Binding netserver and netperf (or other applications) to particular + CPUs will have a significant difference in performance measurements. + You may need to experiment which CPU to bind the application to in + order to achieve the best performance for your system. + + If you are developing an application designed for 10Gb networking, + please keep in mind you may want to look at kernel functions + sched_setaffinity & sched_getaffinity to bind your application. + + If you are just running user-space applications such as ftp, telnet, + etc., you may want to try the runon tool provided by Tim Hockin's + procstate utility. You could also try binding the interface to a + particular CPU: runon 0 ifup eth0 + SUPPORT ======= diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile index ff8c11b3a4e..91e927827c4 100644 --- a/drivers/net/chelsio/Makefile +++ b/drivers/net/chelsio/Makefile @@ -7,6 +7,5 @@ obj-$(CONFIG_CHELSIO_T1) += cxgb.o EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) -cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o - +cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h deleted file mode 100644 index c523d24836b..00000000000 --- a/drivers/net/chelsio/ch_ethtool.h +++ /dev/null @@ -1,102 +0,0 @@ -/***************************************************************************** - * * - * File: ch_ethtool.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:15:58 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHETHTOOL_LINUX_H__ -#define __CHETHTOOL_LINUX_H__ - -/* TCB size in 32-bit words */ -#define TCB_WORDS (TCB_SIZE / 4) - -enum { - ETHTOOL_SETREG, - ETHTOOL_GETREG, - ETHTOOL_SETTPI, - ETHTOOL_GETTPI, - ETHTOOL_DEVUP, - ETHTOOL_GETMTUTAB, - ETHTOOL_SETMTUTAB, - ETHTOOL_GETMTU, - ETHTOOL_SET_PM, - ETHTOOL_GET_PM, - ETHTOOL_GET_TCAM, - ETHTOOL_SET_TCAM, - ETHTOOL_GET_TCB, - ETHTOOL_READ_TCAM_WORD, -}; - -struct ethtool_reg { - uint32_t cmd; - uint32_t addr; - uint32_t val; -}; - -struct ethtool_mtus { - uint32_t cmd; - uint16_t mtus[NMTUS]; -}; - -struct ethtool_pm { - uint32_t cmd; - uint32_t tx_pg_sz; - uint32_t tx_num_pg; - uint32_t rx_pg_sz; - uint32_t rx_num_pg; - uint32_t pm_total; -}; - -struct ethtool_tcam { - uint32_t cmd; - uint32_t tcam_size; - uint32_t nservers; - uint32_t nroutes; -}; - -struct ethtool_tcb { - uint32_t cmd; - uint32_t tcb_index; - uint32_t tcb_data[TCB_WORDS]; -}; - -struct ethtool_tcam_word { - uint32_t cmd; - uint32_t addr; - uint32_t buf[3]; -}; - -#define SIOCCHETHTOOL SIOCDEVPRIVATE -#endif diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h index 017684ff48d..f09348802b4 100644 --- a/drivers/net/chelsio/common.h +++ b/drivers/net/chelsio/common.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: common.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.21 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,74 +36,101 @@ * * ****************************************************************************/ -#ifndef CHELSIO_COMMON_H -#define CHELSIO_COMMON_H +#ifndef _CXGB_COMMON_H_ +#define _CXGB_COMMON_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" +#define DRV_NAME "cxgb" +#define DRV_VERSION "2.1.1" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +typedef struct adapter adapter_t; + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; -#define DIMOF(x) (sizeof(x)/sizeof(x[0])) + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#define MAX_NPORTS 4 -#define NMTUS 8 -#define MAX_NPORTS 4 -#define TCB_SIZE 128 +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff enum { - CHBT_BOARD_7500, - CHBT_BOARD_8000, - CHBT_BOARD_CHT101, - CHBT_BOARD_CHT110, - CHBT_BOARD_CHT210, - CHBT_BOARD_CHT204, CHBT_BOARD_N110, - CHBT_BOARD_N210, - CHBT_BOARD_COUGAR, - CHBT_BOARD_6800, - CHBT_BOARD_SIMUL + CHBT_BOARD_N210 }; enum { - CHBT_TERM_FPGA, CHBT_TERM_T1, - CHBT_TERM_T2, - CHBT_TERM_T3 + CHBT_TERM_T2 }; enum { - CHBT_MAC_CHELSIO_A, - CHBT_MAC_IXF1010, CHBT_MAC_PM3393, - CHBT_MAC_VSC7321, - CHBT_MAC_DUMMY }; enum { - CHBT_PHY_88E1041, - CHBT_PHY_88E1111, CHBT_PHY_88X2010, - CHBT_PHY_XPAK, - CHBT_PHY_MY3126, - CHBT_PHY_DUMMY }; enum { - PAUSE_RX = 1, - PAUSE_TX = 2, - PAUSE_AUTONEG = 4 + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 }; /* Revisions of T1 chip */ -#define TERM_T1A 0 -#define TERM_T1B 1 -#define TERM_T2 3 - -struct tp_params { - unsigned int pm_size; - unsigned int cm_size; - unsigned int pm_rx_base; - unsigned int pm_tx_base; - unsigned int pm_rx_pg_size; - unsigned int pm_tx_pg_size; - unsigned int pm_rx_num_pgs; - unsigned int pm_tx_num_pgs; - unsigned int use_5tuple_mode; +enum { + TERM_T1A = 0, + TERM_T1B = 1, + TERM_T2 = 3 }; struct sge_params { @@ -118,17 +145,7 @@ struct sge_params { unsigned int polling; }; -struct mc5_params { - unsigned int mode; /* selects MC5 width */ - unsigned int nservers; /* size of server region */ - unsigned int nroutes; /* size of routing region */ -}; - -/* Default MC5 region sizes */ -#define DEFAULT_SERVER_REGION_LEN 256 -#define DEFAULT_RT_REGION_LEN 1024 - -struct pci_params { +struct chelsio_pci_params { unsigned short speed; unsigned char width; unsigned char is_pcix; @@ -136,31 +153,14 @@ struct pci_params { struct adapter_params { struct sge_params sge; - struct mc5_params mc5; - struct tp_params tp; - struct pci_params pci; + struct chelsio_pci_params pci; const struct board_info *brd_info; - unsigned short mtus[NMTUS]; - unsigned int nports; /* # of ethernet ports */ + unsigned int nports; /* # of ethernet ports */ unsigned int stats_update_period; unsigned short chip_revision; unsigned char chip_version; - unsigned char is_asic; -}; - -struct pci_err_cnt { - unsigned int master_parity_err; - unsigned int sig_target_abort; - unsigned int rcv_target_abort; - unsigned int rcv_master_abort; - unsigned int sig_sys_err; - unsigned int det_parity_err; - unsigned int pio_parity_err; - unsigned int wf_parity_err; - unsigned int rf_parity_err; - unsigned int cf_parity_err; }; struct link_config { @@ -175,8 +175,60 @@ struct link_config { unsigned char autoneg; /* autonegotiating? */ }; -#define SPEED_INVALID 0xffff -#define DUPLEX_INVALID 0xff +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct sge; +struct peespi; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct peespi *espi; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + /* guards async operations */ + spinlock_t async_lock ____cacheline_aligned; + u32 slow_intr_mask; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = 1 << 0, + TSO_CAPABLE = 1 << 2, + TCP_CSUM_CAPABLE = 1 << 3, + UDP_CSUM_CAPABLE = 1 << 4, + VLAN_ACCEL_CAPABLE = 1 << 5, + RX_CSUM_ENABLED = 1 << 6, +}; struct mdio_ops; struct gmac; @@ -205,19 +257,8 @@ struct board_info { const char *desc; }; -#include "osdep.h" - -#ifndef PCI_VENDOR_ID_CHELSIO -#define PCI_VENDOR_ID_CHELSIO 0x1425 -#endif - extern struct pci_device_id t1_pci_tbl[]; -static inline int t1_is_asic(const adapter_t *adapter) -{ - return adapter->params.is_asic; -} - static inline int adapter_matches_type(const adapter_t *adapter, int version, int revision) { @@ -245,25 +286,29 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap) return board_info(adap)->clock_core / 1000000; } -int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); -int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); +extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); -void t1_interrupts_enable(adapter_t *adapter); -void t1_interrupts_disable(adapter_t *adapter); -void t1_interrupts_clear(adapter_t *adapter); -int elmer0_ext_intr_handler(adapter_t *adapter); -int t1_slow_intr_handler(adapter_t *adapter); +extern void t1_interrupts_enable(adapter_t *adapter); +extern void t1_interrupts_disable(adapter_t *adapter); +extern void t1_interrupts_clear(adapter_t *adapter); +extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_slow_intr_handler(adapter_t *adapter); -int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); -const struct board_info *t1_get_board_info(unsigned int board_id); -const struct board_info *t1_get_board_info_from_ids(unsigned int devid, +extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +extern const struct board_info *t1_get_board_info(unsigned int board_id); +extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid, unsigned short ssid); -int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); -int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, +extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p); -int t1_init_hw_modules(adapter_t *adapter); -int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); -void t1_free_sw_modules(adapter_t *adapter); -void t1_fatal_err(adapter_t *adapter); -#endif +extern int t1_init_hw_modules(adapter_t *adapter); +extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +extern void t1_free_sw_modules(adapter_t *adapter); +extern void t1_fatal_err(adapter_t *adapter); + +extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); +#endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h index 1bc2248264c..3412342f734 100644 --- a/drivers/net/chelsio/cphy.h +++ b/drivers/net/chelsio/cphy.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cphy.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_CPHY_H -#define CHELSIO_CPHY_H +#ifndef _CXGB_CPHY_H_ +#define _CXGB_CPHY_H_ #include "common.h" @@ -142,9 +142,7 @@ struct gphy { int (*reset)(adapter_t *adapter); }; -extern struct gphy t1_my3126_ops; -extern struct gphy t1_mv88e1xxx_ops; -extern struct gphy t1_xpak_ops; extern struct gphy t1_mv88x201x_ops; extern struct gphy t1_dummy_phy_ops; -#endif + +#endif /* _CXGB_CPHY_H_ */ diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h index 45e9248979f..27925e487bc 100644 --- a/drivers/net/chelsio/cpl5_cmd.h +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cpl5_cmd.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef _CPL5_CMD_H -#define _CPL5_CMD_H +#ifndef _CXGB_CPL5_CMD_H_ +#define _CXGB_CPL5_CMD_H_ #include @@ -59,12 +59,12 @@ enum { /* TX_PKT_LSO ethernet types */ }; struct cpl_rx_data { - __u32 rsvd0; - __u32 len; - __u32 seq; - __u16 urg; - __u8 rsvd1; - __u8 status; + u32 rsvd0; + u32 len; + u32 seq; + u16 urg; + u8 rsvd1; + u8 status; }; /* @@ -73,73 +73,73 @@ struct cpl_rx_data { * used so we break it into 2 16-bit parts to easily meet our alignment needs. */ struct cpl_tx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u16 len_hi; - __u16 len_lo; + u16 vlan; + u16 len_hi; + u16 len_lo; }; struct cpl_tx_pkt_lso { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u32 len; + u16 vlan; + u32 len; - __u32 rsvd2; - __u8 rsvd3; + u32 rsvd2; + u8 rsvd3; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 tcp_hdr_words:4; - __u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; #else - __u8 ip_hdr_words:4; - __u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; #endif - __u16 eth_type_mss; + u16 eth_type_mss; }; struct cpl_rx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 csum_valid:1; - __u8 bad_pkt:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 csum_valid:1; + u8 bad_pkt:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 bad_pkt:1; - __u8 csum_valid:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 bad_pkt:1; + u8 csum_valid:1; + u8 iff:4; #endif - __u16 csum; - __u16 vlan; - __u16 len; + u16 csum; + u16 vlan; + u16 len; }; -#endif +#endif /* _CXGB_CPL5_CMD_H_ */ diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index 48c4d5acfcd..28ae478b386 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cxgb2.c * - * $Revision: 1.11 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.25 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * Chelsio 10Gb Ethernet Driver. * * * @@ -37,7 +37,6 @@ ****************************************************************************/ #include "common.h" - #include #include #include @@ -48,44 +47,56 @@ #include #include #include -#include -#include +#include #include -#include "ch_ethtool.h" #include "cpl5_cmd.h" #include "regs.h" #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" +#ifdef work_struct +#include +#define INIT_WORK INIT_TQUEUE +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks + static inline void schedule_mac_stats_update(struct adapter *ap, int secs) { - schedule_delayed_work(&ap->stats_update_task, secs * HZ); + mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); } static inline void cancel_mac_stats_update(struct adapter *ap) { - cancel_delayed_work(&ap->stats_update_task); + del_timer_sync(&ap->stats_update_timer); + flush_scheduled_tasks(); } -#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64) -# define FMT64 "l" -#else -# define FMT64 "ll" -#endif +/* + * Stats update timer for 2.4. It schedules a task to do the actual update as + * we need to access MAC statistics in process context. + */ +static void mac_stats_timer(unsigned long data) +{ + struct adapter *ap = (struct adapter *)data; -# define DRV_TYPE "" -# define MODULE_DESC "Chelsio Network Driver" + schedule_task(&ap->stats_update_task); +} +#else +#include -static char driver_name[] = DRV_NAME; -static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver"; -static char driver_version[] = "2.1.0"; +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} -#define PCI_DMA_64BIT ~0ULL -#define PCI_DMA_32BIT 0xffffffffULL +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} +#endif #define MAX_CMDQ_ENTRIES 16384 #define MAX_CMDQ1_ENTRIES 1024 @@ -107,10 +118,9 @@ static char driver_version[] = "2.1.0"; */ #define EEPROM_SIZE 32 -MODULE_DESCRIPTION(MODULE_DESC); +MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR("Chelsio Communications"); MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, t1_pci_tbl); static int dflt_msg_enable = DFLT_MSG_ENABLE; @@ -140,17 +150,17 @@ static void t1_set_rxmode(struct net_device *dev) static void link_report(struct port_info *p) { if (!netif_carrier_ok(p->dev)) - printk(KERN_INFO "%s: link is down\n", p->dev->name); + printk(KERN_INFO "%s: link down\n", p->dev->name); else { - const char *s = "10 Mbps"; + const char *s = "10Mbps"; switch (p->link_config.speed) { - case SPEED_10000: s = "10 Gbps"; break; - case SPEED_1000: s = "1000 Mbps"; break; - case SPEED_100: s = "100 Mbps"; break; + case SPEED_10000: s = "10Gbps"; break; + case SPEED_1000: s = "1000Mbps"; break; + case SPEED_100: s = "100Mbps"; break; } - printk(KERN_INFO "%s: link is up at %s, %s duplex\n", + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", p->dev->name, s, p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); } @@ -186,10 +196,8 @@ static void link_start(struct port_info *p) static void enable_hw_csum(struct adapter *adapter) { if (adapter->flags & TSO_CAPABLE) - t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ - if (adapter->flags & UDP_CSUM_CAPABLE) - t1_tp_set_udp_checksum_offload(adapter->tp, 1); - t1_tp_set_tcp_checksum_offload(adapter->tp, 1); + t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ + t1_tp_set_tcp_checksum_offload(adapter, 1); } /* @@ -210,15 +218,13 @@ static int cxgb_up(struct adapter *adapter) } t1_interrupts_clear(adapter); - - if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ, - adapter->name, adapter))) + if ((err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), SA_SHIRQ, + adapter->name, adapter))) { goto out_err; - + } t1_sge_start(adapter->sge); t1_interrupts_enable(adapter); - - err = 0; out_err: return err; } @@ -339,47 +345,80 @@ static void set_msglevel(struct net_device *dev, u32 val) } static char stats_strings[][ETH_GSTRING_LEN] = { - "TxOctetsOK", - "TxOctetsBad", - "TxUnicastFramesOK", - "TxMulticastFramesOK", - "TxBroadcastFramesOK", - "TxPauseFrames", - "TxFramesWithDeferredXmissions", - "TxLateCollisions", - "TxTotalCollisions", - "TxFramesAbortedDueToXSCollisions", - "TxUnderrun", - "TxLengthErrors", - "TxInternalMACXmitError", - "TxFramesWithExcessiveDeferral", - "TxFCSErrors", - - "RxOctetsOK", - "RxOctetsBad", - "RxUnicastFramesOK", - "RxMulticastFramesOK", - "RxBroadcastFramesOK", - "RxPauseFrames", - "RxFCSErrors", - "RxAlignErrors", - "RxSymbolErrors", - "RxDataErrors", - "RxSequenceErrors", - "RxRuntErrors", - "RxJabberErrors", - "RxInternalMACRcvError", - "RxInRangeLengthErrors", - "RxOutOfRangeLengthField", - "RxFrameTooLongErrors" + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + "TSO", + "VLANextractions", + "VLANinsertions", + "RxCsumGood", + "TxCsumOffload", + "RxDrops" + + "respQ_empty", + "respQ_overflow", + "freelistQ_empty", + "pkt_too_big", + "pkt_mismatch", + "cmdQ_full0", + "cmdQ_full1", + "tx_ipfrags", + "tx_reg_pkts", + "tx_lso_pkts", + "tx_do_cksum", + + "espi_DIP2ParityErr", + "espi_DIP4Err", + "espi_RxDrops", + "espi_TxDrops", + "espi_RxOvfl", + "espi_ParityErr" }; + +#define T2_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T2_REGMAP_SIZE; +} static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct adapter *adapter = dev->priv; - strcpy(info->driver, driver_name); - strcpy(info->version, driver_version); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); strcpy(info->fw_version, "N/A"); strcpy(info->bus_info, pci_name(adapter->pdev)); } @@ -401,42 +440,88 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats, struct adapter *adapter = dev->priv; struct cmac *mac = adapter->port[dev->if_port].mac; const struct cmac_statistics *s; + const struct sge_port_stats *ss; + const struct sge_intr_counts *t; s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); + t = t1_sge_get_intr_counts(adapter->sge); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + *data++ = ss->tso; + *data++ = ss->vlan_xtract; + *data++ = ss->vlan_insert; + *data++ = ss->rx_cso_good; + *data++ = ss->tx_cso; + *data++ = ss->rx_drops; + + *data++ = (u64)t->respQ_empty; + *data++ = (u64)t->respQ_overflow; + *data++ = (u64)t->freelistQ_empty; + *data++ = (u64)t->pkt_too_big; + *data++ = (u64)t->pkt_mismatch; + *data++ = (u64)t->cmdQ_full[0]; + *data++ = (u64)t->cmdQ_full[1]; + *data++ = (u64)t->tx_ipfrags; + *data++ = (u64)t->tx_reg_pkts; + *data++ = (u64)t->tx_lso_pkts; + *data++ = (u64)t->tx_do_cksum; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = readl(ap->regs + start); +} - *data++ = s->TxOctetsOK; - *data++ = s->TxOctetsBad; - *data++ = s->TxUnicastFramesOK; - *data++ = s->TxMulticastFramesOK; - *data++ = s->TxBroadcastFramesOK; - *data++ = s->TxPauseFrames; - *data++ = s->TxFramesWithDeferredXmissions; - *data++ = s->TxLateCollisions; - *data++ = s->TxTotalCollisions; - *data++ = s->TxFramesAbortedDueToXSCollisions; - *data++ = s->TxUnderrun; - *data++ = s->TxLengthErrors; - *data++ = s->TxInternalMACXmitError; - *data++ = s->TxFramesWithExcessiveDeferral; - *data++ = s->TxFCSErrors; - - *data++ = s->RxOctetsOK; - *data++ = s->RxOctetsBad; - *data++ = s->RxUnicastFramesOK; - *data++ = s->RxMulticastFramesOK; - *data++ = s->RxBroadcastFramesOK; - *data++ = s->RxPauseFrames; - *data++ = s->RxFCSErrors; - *data++ = s->RxAlignErrors; - *data++ = s->RxSymbolErrors; - *data++ = s->RxDataErrors; - *data++ = s->RxSequenceErrors; - *data++ = s->RxRuntErrors; - *data++ = s->RxJabberErrors; - *data++ = s->RxInternalMACRcvError; - *data++ = s->RxInRangeLengthErrors; - *data++ = s->RxOutOfRangeLengthField; - *data++ = s->RxFrameTooLongErrors; +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: bits 0..9: chip version, bits 10..15: chip revision + */ + regs->version = 2; + + memset(buf, 0, T2_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); } static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) @@ -455,12 +540,12 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex = -1; } - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = p->phy->addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = p->link_config.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; return 0; } @@ -506,7 +591,7 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct link_config *lc = &p->link_config; if (!(lc->supported & SUPPORTED_Autoneg)) - return -EOPNOTSUPP; /* can't change speed/duplex */ + return -EOPNOTSUPP; /* can't change speed/duplex */ if (cmd->autoneg == AUTONEG_DISABLE) { int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); @@ -631,7 +716,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) return -EINVAL; if (adapter->flags & FULL_INIT_DONE) - return -EBUSY; + return -EBUSY; adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; @@ -645,22 +730,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - unsigned int sge_coalesce_usecs = 0; + /* + * If RX coalescing is requested we use NAPI, otherwise interrupts. + * This choice can be made only when all ports and the TOE are off. + */ + if (adapter->open_device_map == 0) + adapter->params.sge.polling = c->use_adaptive_rx_coalesce; - sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) && - (c->rx_coalesce_usecs == sge_coalesce_usecs) ) { - adapter->params.sge.rx_coalesce_usecs = - adapter->params.sge.default_rx_coalesce_usecs; + if (adapter->params.sge.polling) { + adapter->params.sge.rx_coalesce_usecs = 0; } else { adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; } - - adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs; - adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000); + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; - adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); return 0; } @@ -669,12 +752,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */ - c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - } else { - c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; - } + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; return 0; @@ -682,9 +760,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) static int get_eeprom_len(struct net_device *dev) { - struct adapter *adapter = dev->priv; - - return t1_is_asic(adapter) ? EEPROM_SIZE : 0; + return EEPROM_SIZE; } #define EEPROM_MAGIC(ap) \ @@ -728,118 +804,55 @@ static struct ethtool_ops t1_ethtool_ops = { .get_strings = get_strings, .get_stats_count = get_stats_count, .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, .get_tso = ethtool_op_get_tso, .set_tso = set_tso, }; -static int ethtool_ioctl(struct net_device *dev, void *useraddr) +static void cxgb_proc_cleanup(struct adapter *adapter, + struct proc_dir_entry *dir) { - u32 cmd; - struct adapter *adapter = dev->priv; - - if (copy_from_user(&cmd, useraddr, sizeof(cmd))) - return -EFAULT; - - switch (cmd) { - case ETHTOOL_SETREG: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr == A_ESPI_MISC_CONTROL) - t1_espi_set_misc_ctrl(adapter, edata.val); - else { - if (edata.addr == 0x950) - t1_sge_set_ptimeout(adapter, edata.val); - else - writel(edata.val, adapter->regs + edata.addr); - } - break; - } - case ETHTOOL_GETREG: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr >= 0x900 && edata.addr <= 0x93c) - edata.val = t1_espi_get_mon(adapter, edata.addr, 1); - else { - if (edata.addr == 0x950) - edata.val = t1_sge_get_ptimeout(adapter); - else - edata.val = readl(adapter->regs + edata.addr); - } - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - case ETHTOOL_SETTPI: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_write(adapter, edata.addr, edata.val); - break; - } - case ETHTOOL_GETTPI: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_read(adapter, edata.addr, &edata.val); - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - default: - return -EOPNOTSUPP; - } - return 0; + const char *name; + name = adapter->name; + remove_proc_entry(name, dir); } +//#define chtoe_setup_toedev(adapter) NULL +#define update_mtu_tab(adapter) +#define write_smt_entry(adapter, idx) static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) { - struct adapter *adapter = dev->priv; - struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->port[dev->if_port].phy->addr; - /* FALLTHRU */ - case SIOCGMIIREG: { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; u32 val; - if (!phy->mdio_read) return -EOPNOTSUPP; + if (!phy->mdio_read) + return -EOPNOTSUPP; phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, &val); - data->val_out = val; - break; + data->val_out = val; + break; } - case SIOCSMIIREG: { + case SIOCSMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (!phy->mdio_write) return -EOPNOTSUPP; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, - data->val_in); - break; + data->val_in); + break; } - case SIOCCHETHTOOL: - return ethtool_ioctl(dev, (void *)req->ifr_data); default: return -EOPNOTSUPP; } @@ -853,9 +866,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu) struct cmac *mac = adapter->port[dev->if_port].mac; if (!mac->ops->set_mtu) - return -EOPNOTSUPP; + return -EOPNOTSUPP; if (new_mtu < 68) - return -EINVAL; + return -EINVAL; if ((ret = mac->ops->set_mtu(mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -902,9 +915,12 @@ static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) #ifdef CONFIG_NET_POLL_CONTROLLER static void t1_netpoll(struct net_device *dev) { + unsigned long flags; struct adapter *adapter = dev->priv; - t1_interrupt(adapter->pdev->irq, adapter, NULL); + local_irq_save(flags); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); + local_irq_restore(flags); } #endif @@ -938,16 +954,17 @@ static void mac_stats_task(void *data) */ static void ext_intr_task(void *data) { - u32 enable; struct adapter *adapter = data; elmer0_ext_intr_handler(adapter); /* Now reenable external interrupts */ - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT); - enable = t1_read_reg_4(adapter, A_PL_ENABLE); - t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT); + spin_lock_irq(&adapter->async_lock); adapter->slow_intr_mask |= F_PL_INTR_EXT; + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); } /* @@ -955,15 +972,14 @@ static void ext_intr_task(void *data) */ void t1_elmer0_ext_intr(struct adapter *adapter) { - u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE); - /* * Schedule a task to handle external interrupts as we require * a process context. We disable EXT interrupts in the interim * and let the task reenable them when it's done. */ adapter->slow_intr_mask &= ~F_PL_INTR_EXT; - t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); schedule_work(&adapter->ext_intr_handler_task); } @@ -977,7 +993,6 @@ void t1_fatal_err(struct adapter *adapter) adapter->name); } - static int __devinit init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -990,14 +1005,14 @@ static int __devinit init_one(struct pci_dev *pdev, struct port_info *pi; if (!version_printed) { - printk(KERN_INFO "%s - version %s\n", driver_string, - driver_version); + printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, + DRV_VERSION); ++version_printed; } err = pci_enable_device(pdev); if (err) - return err; + return err; if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { CH_ERR("%s: cannot find PCI device memory base address\n", @@ -1006,20 +1021,22 @@ static int __devinit init_one(struct pci_dev *pdev, goto out_disable_pdev; } - if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) { + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { pci_using_dac = 1; - if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) { + + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { CH_ERR("%s: unable to obtain 64-bit DMA for" "consistent allocations\n", pci_name(pdev)); err = -ENODEV; goto out_disable_pdev; } - } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) { + + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); goto out_disable_pdev; } - err = pci_request_regions(pdev, driver_name); + err = pci_request_regions(pdev, DRV_NAME); if (err) { CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); goto out_disable_pdev; @@ -1027,7 +1044,7 @@ static int __devinit init_one(struct pci_dev *pdev, pci_set_master(pdev); - mmio_start = pci_resource_start(pdev, 0); + mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); bi = t1_get_board_info(ent->driver_data); @@ -1074,9 +1091,14 @@ static int __devinit init_one(struct pci_dev *pdev, ext_intr_task, adapter); INIT_WORK(&adapter->stats_update_task, mac_stats_task, adapter); +#ifdef work_struct + init_timer(&adapter->stats_update_timer); + adapter->stats_update_timer.function = mac_stats_timer; + adapter->stats_update_timer.data = + (unsigned long)adapter; +#endif pci_set_drvdata(pdev, netdev); - } pi = &adapter->port[i]; @@ -1088,11 +1110,12 @@ static int __devinit init_one(struct pci_dev *pdev, netdev->mem_end = mmio_start + mmio_len - 1; netdev->priv = adapter; netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_LLTX; + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; if (vlan_tso_capable(adapter)) { - adapter->flags |= UDP_CSUM_CAPABLE; #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) adapter->flags |= VLAN_ACCEL_CAPABLE; netdev->features |= @@ -1120,7 +1143,7 @@ static int __devinit init_one(struct pci_dev *pdev, #endif netdev->weight = 64; - SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); } if (t1_init_sw_modules(adapter, bi) < 0) { @@ -1147,7 +1170,7 @@ static int __devinit init_one(struct pci_dev *pdev, if (!adapter->registered_device_map) adapter->name = adapter->port[i].dev->name; - __set_bit(i, &adapter->registered_device_map); + __set_bit(i, &adapter->registered_device_map); } } if (!adapter->registered_device_map) { @@ -1166,11 +1189,12 @@ static int __devinit init_one(struct pci_dev *pdev, t1_free_sw_modules(adapter); out_free_dev: if (adapter) { - if (adapter->regs) - iounmap(adapter->regs); + if (adapter->regs) iounmap(adapter->regs); for (i = bi->port_number - 1; i >= 0; --i) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } } pci_release_regions(pdev); out_disable_pdev: @@ -1200,8 +1224,10 @@ static void __devexit remove_one(struct pci_dev *pdev) t1_free_sw_modules(adapter); iounmap(adapter->regs); while (--i >= 0) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); @@ -1210,7 +1236,7 @@ static void __devexit remove_one(struct pci_dev *pdev) } static struct pci_driver driver = { - .name = driver_name, + .name = DRV_NAME, .id_table = t1_pci_tbl, .probe = init_one, .remove = __devexit_p(remove_one), @@ -1228,4 +1254,3 @@ static void __exit t1_cleanup_module(void) module_init(t1_init_module); module_exit(t1_cleanup_module); - diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h deleted file mode 100644 index 6ac326afcf0..00000000000 --- a/drivers/net/chelsio/cxgb2.h +++ /dev/null @@ -1,122 +0,0 @@ -/***************************************************************************** - * * - * File: cxgb2.h * - * $Revision: 1.8 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CXGB_LINUX_H__ -#define __CXGB_LINUX_H__ - -#include -#include -#include -#include -#include - -/* This belongs in if_ether.h */ -#define ETH_P_CPL5 0xf - -struct cmac; -struct cphy; - -struct port_info { - struct net_device *dev; - struct cmac *mac; - struct cphy *phy; - struct link_config link_config; - struct net_device_stats netstats; -}; - -struct cxgbdev; -struct t1_sge; -struct pemc3; -struct pemc4; -struct pemc5; -struct peulp; -struct petp; -struct pecspi; -struct peespi; -struct work_struct; -struct vlan_group; - -enum { /* adapter flags */ - FULL_INIT_DONE = 0x1, - USING_MSI = 0x2, - TSO_CAPABLE = 0x4, - TCP_CSUM_CAPABLE = 0x8, - UDP_CSUM_CAPABLE = 0x10, - VLAN_ACCEL_CAPABLE = 0x20, - RX_CSUM_ENABLED = 0x40, -}; - -struct adapter { - u8 *regs; - struct pci_dev *pdev; - unsigned long registered_device_map; - unsigned long open_device_map; - unsigned int flags; - - const char *name; - int msg_enable; - u32 mmio_len; - - struct work_struct ext_intr_handler_task; - struct adapter_params params; - - struct vlan_group *vlan_grp; - - /* Terminator modules. */ - struct sge *sge; - struct pemc3 *mc3; - struct pemc4 *mc4; - struct pemc5 *mc5; - struct petp *tp; - struct pecspi *cspi; - struct peespi *espi; - struct peulp *ulp; - - struct port_info port[MAX_NPORTS]; - struct work_struct stats_update_task; - struct timer_list stats_update_timer; - - struct semaphore mib_mutex; - spinlock_t tpi_lock; - spinlock_t work_lock; - - spinlock_t async_lock ____cacheline_aligned; /* guards async operations */ - u32 slow_intr_mask; -}; - -#endif diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h index 08f148643e7..5590cb2dac1 100644 --- a/drivers/net/chelsio/elmer0.h +++ b/drivers/net/chelsio/elmer0.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: elmer0.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 22:49:43 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,14 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ELMER0_H -#define CHELSIO_ELMER0_H - -/* ELMER0 flavors */ -enum { - ELMER0_XC2S300E_6FT256_C, - ELMER0_XC2S100E_6TQ144_C -}; +#ifndef _CXGB_ELMER0_H_ +#define _CXGB_ELMER0_H_ /* ELMER0 registers */ #define A_ELMER0_VERSION 0x100000 @@ -154,4 +148,4 @@ enum { #define MI1_OP_INDIRECT_READ_INC 2 #define MI1_OP_INDIRECT_READ 3 -#endif +#endif /* _CXGB_ELMER0_H_ */ diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 7ec2dc7bafa..230642571c9 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * Ethernet SPI functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -63,15 +63,16 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, { int busy, attempts = TRICN_CMD_ATTEMPTS; - t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | - V_REGISTER_OFFSET(reg_offset) | - V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | - V_BUNDLE_ADDR(bundle_addr) | - V_SPI4_COMMAND(TRICN_CMD_WRITE)); - t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); do { - busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; } while (busy && --attempts); if (busy) @@ -99,12 +100,12 @@ static int tricn_init(adapter_t *adapter) /* 1 */ timeout=1000; do { - stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + stat = readl(adapter->regs + A_ESPI_RX_RESET); is_ready = (stat & 0x4); timeout--; udelay(5); } while (!is_ready || (timeout==0)); - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); if (timeout==0) { CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); @@ -127,14 +128,14 @@ static int tricn_init(adapter_t *adapter) for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); /* 3 */ - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + writel(0x3, adapter->regs + A_ESPI_RX_RESET); return 0; } void t1_espi_intr_enable(struct peespi *espi) { - u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); /* * Cannot enable ESPI interrupts on T1B because HW asserts the @@ -144,28 +145,28 @@ void t1_espi_intr_enable(struct peespi *espi) * cannot be cleared (HW bug). */ enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } void t1_espi_intr_clear(struct peespi *espi) { - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); - t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); } void t1_espi_intr_disable(struct peespi *espi) { - u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } int t1_espi_intr_handler(struct peespi *espi) { u32 cnt; - u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP4ERR) espi->intr_cnt.DIP4_err++; @@ -184,7 +185,7 @@ int t1_espi_intr_handler(struct peespi *espi) * Must read the error count to clear the interrupt * that it causes. */ - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -193,68 +194,28 @@ int t1_espi_intr_handler(struct peespi *espi) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); return 0; } -static void espi_setup_for_pm3393(adapter_t *adapter) +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) { - u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); + return &espi->intr_cnt; } -static void espi_setup_for_vsc7321(adapter_t *adapter) +static void espi_setup_for_pm3393(adapter_t *adapter) { u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); -} - -/* - * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. - */ -static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) -{ - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); - if (nports == 4) { - if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0xf00); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x3c0); - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x7ff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x1ff); - } - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x1fff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x7ff); - } - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); } /* T2 Init part -- */ @@ -263,43 +224,42 @@ static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) /* 3. Init TriCN Hard Macro */ int t1_espi_init(struct peespi *espi, int mac_type, int nports) { + u32 cnt; + u32 status_enable_extra = 0; adapter_t *adapter = espi->adapter; - u32 cnt; u32 status, burstval = 0x800100; /* Disable ESPI training. MACs that can handle it enable it below. */ - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + writel(0, adapter->regs + A_ESPI_TRAIN); if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - V_OUT_OF_SYNC_COUNT(4) | - V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); if (nports == 4) { /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ burstval = 0x200040; } } - t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); - if (mac_type == CHBT_MAC_PM3393) + switch (mac_type) { + case CHBT_MAC_PM3393: espi_setup_for_pm3393(adapter); - else if (mac_type == CHBT_MAC_VSC7321) - espi_setup_for_vsc7321(adapter); - else if (mac_type == CHBT_MAC_IXF1010) { - status_enable_extra = F_INTEL1010MODE; - espi_setup_for_ixf1010(adapter, nports); - } else + break; + default: return -1; + } /* * Make sure any pending interrupts from the SPI are * Cleared before enabling the interrupt. */ - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); - status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP2PARITYERR) { - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -308,10 +268,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); - t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, - status_enable_extra | F_RXSTATUSENABLE); + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); if (is_T2(adapter)) { tricn_init(adapter); @@ -319,10 +279,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) * Always position the control at the 1st port egress IN * (sop,eop) counter to reduce PIOs for T/N210 workaround. */ - espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) & ~MON_MASK) | (F_MONITORED_DIRECTION | F_MONITORED_INTERFACE); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_lock_init(&espi->lock); } @@ -354,15 +314,16 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) spin_lock(&espi->lock); espi->misc_ctrl = (val & ~MON_MASK) | (espi->misc_ctrl & MON_MASK); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_unlock(&espi->lock); } u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) { - struct peespi *espi = adapter->espi; u32 sel; + struct peespi *espi = adapter->espi; + if (!is_T2(adapter)) return 0; sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); @@ -373,14 +334,13 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) else spin_lock(&espi->lock); if ((sel != (espi->misc_ctrl & MON_MASK))) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - ((espi->misc_ctrl & ~MON_MASK) | sel)); - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - espi->misc_ctrl); + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); } else - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); spin_unlock(&espi->lock); return sel; } diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h index 0f84e8b6399..c90e37f8457 100644 --- a/drivers/net/chelsio/espi.h +++ b/drivers/net/chelsio/espi.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ESPI_H -#define CHELSIO_ESPI_H +#ifndef _CXGB_ESPI_H_ +#define _CXGB_ESPI_H_ #include "common.h" @@ -60,8 +60,9 @@ void t1_espi_intr_enable(struct peespi *); void t1_espi_intr_clear(struct peespi *); void t1_espi_intr_disable(struct peespi *); int t1_espi_intr_handler(struct peespi *); +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); -#endif +#endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h index 24501e2232c..746b0eeea96 100644 --- a/drivers/net/chelsio/gmac.h +++ b/drivers/net/chelsio/gmac.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: gmac.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * Generic MAC functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -37,8 +37,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_GMAC_H -#define CHELSIO_GMAC_H +#ifndef _CXGB_GMAC_H_ +#define _CXGB_GMAC_H_ #include "common.h" @@ -130,4 +130,5 @@ extern struct gmac t1_chelsio_mac_ops; extern struct gmac t1_vsc7321_ops; extern struct gmac t1_ixf1010_ops; extern struct gmac t1_dummy_mac_ops; -#endif + +#endif /* _CXGB_GMAC_H_ */ diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c index f54133af1bc..db503428278 100644 --- a/drivers/net/chelsio/mv88x201x.c +++ b/drivers/net/chelsio/mv88x201x.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: mv88x201x.c * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.12 $ * + * $Date: 2005/04/15 19:27:14 $ * * Description: * * Marvell PHY (mv88x201x) functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -85,33 +85,29 @@ static int mv88x201x_reset(struct cphy *cphy, int wait) static int mv88x201x_interrupt_enable(struct cphy *cphy) { + u32 elmer; + /* Enable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x1); /* Enable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } static int mv88x201x_interrupt_disable(struct cphy *cphy) { + u32 elmer; + /* Disable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x0); /* Disable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer &= ~ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } @@ -144,11 +140,9 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy) #endif /* Clear Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); return 0; } diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h deleted file mode 100644 index 095cb474434..00000000000 --- a/drivers/net/chelsio/osdep.h +++ /dev/null @@ -1,169 +0,0 @@ -/***************************************************************************** - * * - * File: osdep.h * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHELSIO_OSDEP_H -#define __CHELSIO_OSDEP_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cxgb2.h" - -#define DRV_NAME "cxgb" -#define PFX DRV_NAME ": " - -#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) -#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) -#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) - -/* - * More powerful macro that selectively prints messages based on msg_enable. - * For info and debugging messages. - */ -#define CH_MSG(adapter, level, category, fmt, ...) do { \ - if ((adapter)->msg_enable & NETIF_MSG_##category) \ - printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ - ## __VA_ARGS__); \ -} while (0) - -#ifdef DEBUG -# define CH_DBG(adapter, category, fmt, ...) \ - CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) -#else -# define CH_DBG(fmt, ...) -#endif - -/* Additional NETIF_MSG_* categories */ -#define NETIF_MSG_MMIO 0x8000000 - -#define CH_DEVICE(devid, ssid, idx) \ - { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } - -#define SUPPORTED_PAUSE (1 << 13) -#define SUPPORTED_LOOPBACK (1 << 15) - -#define ADVERTISED_PAUSE (1 << 13) -#define ADVERTISED_ASYM_PAUSE (1 << 14) - -/* - * Now that we have included the driver's main data structure, - * we typedef it to something the rest of the system understands. - */ -typedef struct adapter adapter_t; - -#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock) -#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock) - -void t1_elmer0_ext_intr(adapter_t *adapter); -void t1_link_changed(adapter_t *adapter, int port_id, int link_status, - int speed, int duplex, int fc); - -static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr) -{ - u16 val = readw(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writew(val, adapter->regs + reg_addr); -} - -static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr) -{ - u32 val = readl(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writel(val, adapter->regs + reg_addr); -} - -static inline const char *port_name(adapter_t *adapter, int port_idx) -{ - return adapter->port[port_idx].dev->name; -} - -static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx, - u8 hw_addr[]) -{ - memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN); -} - -struct t1_rx_mode { - struct net_device *dev; - u32 idx; - struct dev_mc_list *list; -}; - -#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) -#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) -#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) - -static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) -{ - u8 *addr = 0; - - if (rm->idx++ < rm->dev->mc_count) { - addr = rm->list->dmi_addr; - rm->list = rm->list->next; - } - return addr; -} - -#endif diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c index 17bd20f60d9..04a1404fc65 100644 --- a/drivers/net/chelsio/pm3393.c +++ b/drivers/net/chelsio/pm3393.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: pm3393.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.16 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -45,15 +45,19 @@ /* 802.3ae 10Gb/s MDIO Manageable Device(MMD) */ -#define MMD_RESERVED 0 -#define MMD_PMAPMD 1 -#define MMD_WIS 2 -#define MMD_PCS 3 -#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */ -#define MMD_DTE_XGXS 5 +enum { + MMD_RESERVED, + MMD_PMAPMD, + MMD_WIS, + MMD_PCS, + MMD_PHY_XGXS, /* XGMII Extender Sublayer */ + MMD_DTE_XGXS, +}; -#define PHY_XGXS_CTRL_1 0 -#define PHY_XGXS_STATUS_1 1 +enum { + PHY_XGXS_CTRL_1, + PHY_XGXS_STATUS_1 +}; #define OFFSET(REG_ADDR) (REG_ADDR << 2) @@ -160,9 +164,9 @@ static int pm3393_interrupt_enable(struct cmac *cmac) 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE); + pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); return 0; } @@ -242,9 +246,9 @@ static int pm3393_interrupt_clear(struct cmac *cmac) /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE); + pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); return 0; } @@ -261,8 +265,6 @@ static int pm3393_interrupt_handler(struct cmac *cmac) /* Read the master interrupt status register. */ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &master_intr_status); - CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", - master_intr_status); /* TBD XXX Lets just clear everything for now */ pm3393_interrupt_clear(cmac); @@ -703,10 +705,9 @@ static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ /* For T1 use timer based Mac flow control. */ - if (t1_is_T1B(adapter)) - t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ - t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ /* Setup Exact Match Filter 0 to allow broadcast packets. @@ -814,12 +815,6 @@ static int pm3393_mac_reset(adapter_t * adapter) successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock && is_xaui_mabc_pll_locked); - - CH_DBG(adapter, HW, - "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " - "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", - i, is_pl4_reset_finished, val, is_pl4_outof_lock, - is_xaui_mabc_pll_locked); } return successful_reset ? 0 : 1; } diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h index 5a70803eb1b..b90e11f40d1 100644 --- a/drivers/net/chelsio/regs.h +++ b/drivers/net/chelsio/regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.8 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,7 +36,8 @@ * * ****************************************************************************/ -/* Do not edit this file */ +#ifndef _CXGB_REGS_H_ +#define _CXGB_REGS_H_ /* SGE registers */ #define A_SG_CONTROL 0x0 @@ -74,6 +75,14 @@ #define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) #define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) +#define S_DISABLE_FL0_GTS 10 +#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS) +#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U) + +#define S_DISABLE_FL1_GTS 11 +#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS) +#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U) + #define S_ENABLE_BIG_ENDIAN 12 #define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) #define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) @@ -132,6 +141,7 @@ #define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) #define A_SG_INT_CAUSE 0xbc +#define A_SG_RESPACCUTIMER 0xc0 /* MC3 registers */ @@ -247,6 +257,10 @@ #define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) #define A_TP_PC_CONFIG 0x348 +#define S_DIS_TX_FILL_WIN_PUSH 12 +#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) +#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) + #define S_TP_PC_REV 30 #define M_TP_PC_REV 0x3 #define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) @@ -451,3 +465,4 @@ #define M_PCI_MODE_CLK 0x3 #define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) +#endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index bcf8b1e939b..53b41d99b00 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.c * - * $Revision: 1.13 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * DMA engine. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -58,59 +58,62 @@ #include "regs.h" #include "espi.h" + +#ifdef NETIF_F_TSO #include +#endif #define SGE_CMDQ_N 2 #define SGE_FREELQ_N 2 -#define SGE_CMDQ0_E_N 512 +#define SGE_CMDQ0_E_N 1024 #define SGE_CMDQ1_E_N 128 #define SGE_FREEL_SIZE 4096 #define SGE_JUMBO_FREEL_SIZE 512 #define SGE_FREEL_REFILL_THRESH 16 #define SGE_RESPQ_E_N 1024 -#define SGE_INTR_BUCKETSIZE 100 -#define SGE_INTR_LATBUCKETS 5 -#define SGE_INTR_MAXBUCKETS 11 -#define SGE_INTRTIMER0 1 -#define SGE_INTRTIMER1 50 -#define SGE_INTRTIMER_NRES 10000 -#define SGE_RX_COPY_THRESHOLD 256 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_COPY_THRES 256 #define SGE_RX_SM_BUF_SIZE 1536 -#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4) +# define SGE_RX_DROP_THRES 2 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) -#define SGE_RX_OFFSET 2 #ifndef NET_IP_ALIGN -# define NET_IP_ALIGN SGE_RX_OFFSET +# define NET_IP_ALIGN 2 #endif +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + /* - * Memory Mapped HW Command, Freelist and Response Queue Descriptors + * Command queue, receive buffer list, and response queue descriptors. */ #if defined(__BIG_ENDIAN_BITFIELD) struct cmdQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 RespQueueSelector : 4; - u32 ResponseTokens : 12; - u32 CmdId : 8; - u32 Reserved : 3; - u32 TokenValid : 1; - u32 Eop : 1; - u32 Sop : 1; - u32 DataValid : 1; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; }; struct freelQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 Reserved : 31; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; }; struct respQ_e { @@ -128,31 +131,19 @@ struct respQ_e { u32 GenerationBit : 1; u32 BufferLength; }; - #elif defined(__LITTLE_ENDIAN_BITFIELD) struct cmdQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 DataValid : 1; - u32 Sop : 1; - u32 Eop : 1; - u32 TokenValid : 1; - u32 Reserved : 3; - u32 CmdId : 8; - u32 ResponseTokens : 12; - u32 RespQueueSelector : 4; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; }; struct freelQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 Reserved : 31; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; }; struct respQ_e { @@ -179,7 +170,6 @@ struct cmdQ_ce { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(dma_addr); DECLARE_PCI_UNMAP_LEN(dma_len); - unsigned int single; }; struct freelQ_ce { @@ -189,44 +179,52 @@ struct freelQ_ce { }; /* - * SW Command, Freelist and Response Queue + * SW command, freelist and response rings */ struct cmdQ { - atomic_t asleep; /* HW DMA Fetch status */ - atomic_t credits; /* # available descriptors for TX */ - atomic_t pio_pidx; /* Variable updated on Doorbell */ - u16 entries_n; /* # descriptors for TX */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ - u8 genbit; /* current generation (=valid) bit */ - struct cmdQ_e *entries; /* HW command descriptor Q */ - struct cmdQ_ce *centries; /* SW command context descriptor Q */ - spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */ - dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ }; struct freelQ { - unsigned int credits; /* # of available RX buffers */ - unsigned int entries_n; /* free list capacity */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ u16 rx_buffer_size; /* Buffer size on this free list */ u16 dma_offset; /* DMA offset to align IP headers */ - u8 genbit; /* current generation (=valid) bit */ - struct freelQ_e *entries; /* HW freelist descriptor Q */ - struct freelQ_ce *centries; /* SW freelist conext descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ }; struct respQ { - u16 credits; /* # of available respQ descriptors */ - u16 credits_pend; /* # of not yet returned descriptors */ - u16 entries_n; /* # of response Q descriptors */ - u16 pidx; /* producer index (HW) */ - u16 cidx; /* consumer index (SW) */ - u8 genbit; /* current generation(=valid) bit */ + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ struct respQ_e *entries; /* HW response descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ }; /* @@ -239,134 +237,50 @@ struct respQ { */ struct sge { struct adapter *adapter; /* adapter backpointer */ - struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */ - struct respQ respQ; /* response Q instatiation */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ unsigned int rx_pkt_pad; /* RX padding for L2 packets */ unsigned int jumbo_fl; /* jumbo freelist Q index */ - u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */ - u32 currIndex; /* current index into intrtimer[] */ - u32 intrtimer_nres; /* no resource interrupt timer value */ - u32 sge_control; /* shadow content of sge control reg */ - struct sge_intr_counts intr_cnt; - struct timer_list ptimer; - struct sk_buff *pskb; - u32 ptimeout; - struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned int espibug_timeout; + struct sk_buff *espibug_skb; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats port_stats[MAX_NPORTS]; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; }; -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid); - /* * PIO to indicate that memory mapped Q contains valid descriptor(s). */ -static inline void doorbell_pio(struct sge *sge, u32 val) +static inline void doorbell_pio(struct adapter *adapter, u32 val) { wmb(); - t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val); -} - -/* - * Disables the DMA engine. - */ -void t1_sge_stop(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) - del_timer_sync(&sge->ptimer); -} - -static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; -static void t1_espi_workaround(void *data) -{ - struct adapter *adapter = (struct adapter *)data; - struct sge *sge = adapter->sge; - - if (netif_running(adapter->port[0].dev) && - atomic_read(&sge->cmdQ[0].asleep)) { - - u32 seop = t1_espi_get_mon(adapter, 0x930, 0); - - if ((seop & 0xfff0fff) == 0xfff && sge->pskb) { - struct sk_buff *skb = sge->pskb; - if (!skb->cb[0]) { - memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN); - memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN); - - skb->cb[0] = 0xff; - } - t1_sge_tx(skb, adapter,0); - } - } - mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout); -} - -/* - * Enables the DMA engine. - */ -void t1_sge_start(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) { - init_timer(&sge->ptimer); - sge->ptimer.function = (void *)&t1_espi_workaround; - sge->ptimer.data = (unsigned long)sge->adapter; - sge->ptimer.expires = jiffies + sge->ptimeout; - add_timer(&sge->ptimer); - } -} - -/* - * Creates a t1_sge structure and returns suggested resource parameters. - */ -struct sge * __devinit t1_sge_create(struct adapter *adapter, - struct sge_params *p) -{ - struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); - - if (!sge) - return NULL; - memset(sge, 0, sizeof(*sge)); - - if (is_T2(adapter)) - sge->ptimeout = 1; /* finest allowed */ - - sge->adapter = adapter; - sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET; - sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; - - p->cmdQ_size[0] = SGE_CMDQ0_E_N; - p->cmdQ_size[1] = SGE_CMDQ1_E_N; - p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; - p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; - p->rx_coalesce_usecs = SGE_INTRTIMER1; - p->last_rx_coalesce_raw = SGE_INTRTIMER1 * - (board_info(sge->adapter)->clock_core / 1000000); - p->default_rx_coalesce_usecs = SGE_INTRTIMER1; - p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */ - p->sample_interval_usecs = 0; - return sge; + writel(val, adapter->regs + A_SG_DOORBELL); } /* * Frees all RX buffers on the freelist Q. The caller must make sure that * the SGE is turned off before calling this function. */ -static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q) +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) { - unsigned int cidx = Q->cidx, credits = Q->credits; + unsigned int cidx = q->cidx; - while (credits--) { - struct freelQ_ce *ce = &Q->centries[cidx]; + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); dev_kfree_skb(ce->skb); ce->skb = NULL; - if (++cidx == Q->entries_n) + if (++cidx == q->size) cidx = 0; } } @@ -380,29 +294,29 @@ static void free_rx_resources(struct sge *sge) unsigned int size, i; if (sge->respQ.entries) { - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + size = sizeof(struct respQ_e) * sge->respQ.size; pci_free_consistent(pdev, size, sge->respQ.entries, sge->respQ.dma_addr); } for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; + struct freelQ *q = &sge->freelQ[i]; - if (Q->centries) { - free_freelQ_buffers(pdev, Q); - kfree(Q->centries); + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct freelQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } /* * Allocates basic RX resources, consisting of memory mapped freelist Qs and a - * response Q. + * response queue. */ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) { @@ -410,21 +324,22 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; - - Q->genbit = 1; - Q->entries_n = p->freelQ_size[i]; - Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad; - size = sizeof(struct freelQ_e) * Q->entries_n; - Q->entries = (struct freelQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } /* @@ -440,10 +355,17 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + sge->respQ.genbit = 1; - sge->respQ.entries_n = SGE_RESPQ_E_N; - sge->respQ.credits = SGE_RESPQ_E_N; - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; sge->respQ.entries = (struct respQ_e *) pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); if (!sge->respQ.entries) @@ -457,48 +379,37 @@ err_no_mem: } /* - * Frees 'credits_pend' TX buffers and returns the credits to Q->credits. - * - * The adaptive algorithm receives the total size of the buffers freed - * accumulated in @*totpayload. No initialization of this argument here. - * + * Reclaims n TX descriptors and frees the buffers associated with them. */ -static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q, - unsigned int credits_pend, unsigned int *totpayload) +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) { + struct cmdQ_ce *ce; struct pci_dev *pdev = sge->adapter->pdev; - struct sk_buff *skb; - struct cmdQ_ce *ce, *cq = Q->centries; - unsigned int entries_n = Q->entries_n, cidx = Q->cidx, - i = credits_pend; - + unsigned int cidx = q->cidx; - ce = &cq[cidx]; - while (i--) { - if (ce->single) + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (q->sop) pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); else pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); - if (totpayload) - *totpayload += pci_unmap_len(ce, dma_len); - - skb = ce->skb; - if (skb) - dev_kfree_skb_irq(skb); - + q->sop = 0; + if (ce->skb) { + dev_kfree_skb(ce->skb); + q->sop = 1; + } ce++; - if (++cidx == entries_n) { + if (++cidx == q->size) { cidx = 0; - ce = cq; + ce = q->centries; } } - - Q->cidx = cidx; - atomic_add(credits_pend, &Q->credits); + q->cidx = cidx; } /* @@ -512,20 +423,17 @@ static void free_tx_resources(struct sge *sge) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; + struct cmdQ *q = &sge->cmdQ[i]; - if (Q->centries) { - unsigned int pending = Q->entries_n - - atomic_read(&Q->credits); - - if (pending) - free_cmdQ_buffers(sge, Q, pending, NULL); - kfree(Q->centries); + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct cmdQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } @@ -539,25 +447,38 @@ static int alloc_tx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; - - Q->genbit = 1; - Q->entries_n = p->cmdQ_size[i]; - atomic_set(&Q->credits, Q->entries_n); - atomic_set(&Q->asleep, 1); - spin_lock_init(&Q->Qlock); - size = sizeof(struct cmdQ_e) * Q->entries_n; - Q->entries = (struct cmdQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); return 0; err_no_mem: @@ -569,9 +490,9 @@ static inline void setup_ring_params(struct adapter *adapter, u64 addr, u32 size, int base_reg_lo, int base_reg_hi, int size_reg) { - t1_write_reg_4(adapter, base_reg_lo, (u32)addr); - t1_write_reg_4(adapter, base_reg_hi, addr >> 32); - t1_write_reg_4(adapter, size_reg, size); + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); } /* @@ -585,29 +506,11 @@ void t1_set_vlan_accel(struct adapter *adapter, int on_off) if (on_off) sge->sge_control |= F_VLAN_XTRACT; if (adapter->open_device_map) { - t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */ + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ } } -/* - * Sets the interrupt latency timer when the adaptive Rx coalescing - * is turned off. Do nothing when it is turned on again. - * - * This routine relies on the fact that the caller has already set - * the adaptive policy in adapter->sge_params before calling it. -*/ -int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) -{ - if (!p->coalesce_enable) { - u32 newTimer = p->rx_coalesce_usecs * - (board_info(sge->adapter)->clock_core / 1000000); - - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer); - } - return 0; -} - /* * Programs the various SGE registers. However, the engine is not yet enabled, * but sge->sge_control is setup and ready to go. @@ -615,67 +518,40 @@ int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) static void configure_sge(struct sge *sge, struct sge_params *p) { struct adapter *ap = sge->adapter; - int i; - - t1_write_reg_4(ap, A_SG_CONTROL, 0); - setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n, + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); - setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n, + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); setup_ring_params(ap, sge->freelQ[0].dma_addr, - sge->freelQ[0].entries_n, A_SG_FL0BASELWR, + sge->freelQ[0].size, A_SG_FL0BASELWR, A_SG_FL0BASEUPR, A_SG_FL0SIZE); setup_ring_params(ap, sge->freelQ[1].dma_addr, - sge->freelQ[1].entries_n, A_SG_FL1BASELWR, + sge->freelQ[1].size, A_SG_FL1BASELWR, A_SG_FL1BASEUPR, A_SG_FL1SIZE); /* The threshold comparison uses <. */ - t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1); + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); - setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n, - A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); - t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n); + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | V_RX_PKT_OFFSET(sge->rx_pkt_pad); #if defined(__BIG_ENDIAN_BITFIELD) sge->sge_control |= F_ENABLE_BIG_ENDIAN; #endif - /* - * Initialize the SGE Interrupt Timer arrray: - * intrtimer[0] = (SGE_INTRTIMER0) usec - * intrtimer[0intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000; - for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) { - sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i); - sge->intrtimer[i] *= sge->intrtimer[0]; - } - for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) { - sge->intrtimer[i] = (i - 3) * 6; - sge->intrtimer[i] *= sge->intrtimer[0]; - } - sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] = - sge->intrtimer[0] * SGE_INTRTIMER1; - /* Initialize resource timer */ - sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES; - /* Finally finish initialization of intrtimer[0] */ - sge->intrtimer[0] *= SGE_INTRTIMER0; - /* Initialize for a throughput oriented workload */ - sge->currIndex = SGE_INTR_MAXBUCKETS - 1; - - if (p->coalesce_enable) - t1_write_reg_4(ap, A_SG_INTRTIMER, - sge->intrtimer[sge->currIndex]); - else - t1_sge_set_coalesce_params(sge, p); + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); } /* @@ -684,31 +560,8 @@ static void configure_sge(struct sge *sge, struct sge_params *p) static inline unsigned int jumbo_payload_capacity(const struct sge *sge) { return sge->freelQ[sge->jumbo_fl].rx_buffer_size - - sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad; -} - -/* - * Allocates both RX and TX resources and configures the SGE. However, - * the hardware is not enabled yet. - */ -int t1_sge_configure(struct sge *sge, struct sge_params *p) -{ - if (alloc_rx_resources(sge, p)) - return -ENOMEM; - if (alloc_tx_resources(sge, p)) { - free_rx_resources(sge); - return -ENOMEM; - } - configure_sge(sge, p); - - /* - * Now that we have sized the free lists calculate the payload - * capacity of the large buffers. Other parts of the driver use - * this to set the max offload coalescing size so that RX packets - * do not overflow our large buffers. - */ - p->large_buf_capacity = jumbo_payload_capacity(sge); - return 0; + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); } /* @@ -716,8 +569,9 @@ int t1_sge_configure(struct sge *sge, struct sge_params *p) */ void t1_sge_destroy(struct sge *sge) { - if (sge->pskb) - dev_kfree_skb(sge->pskb); + if (sge->espibug_skb) + kfree_skb(sge->espibug_skb); + free_tx_resources(sge); free_rx_resources(sge); kfree(sge); @@ -735,75 +589,75 @@ void t1_sge_destroy(struct sge *sge) * we specify a RX_OFFSET in order to make sure that the IP header is 4B * aligned. */ -static void refill_free_list(struct sge *sge, struct freelQ *Q) +static void refill_free_list(struct sge *sge, struct freelQ *q) { struct pci_dev *pdev = sge->adapter->pdev; - struct freelQ_ce *ce = &Q->centries[Q->pidx]; - struct freelQ_e *e = &Q->entries[Q->pidx]; - unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; - while (Q->credits < Q->entries_n) { - if (e->GenerationBit != Q->genbit) { - struct sk_buff *skb; - dma_addr_t mapping; + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; - skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC); - if (!skb) - break; - if (Q->dma_offset) - skb_reserve(skb, Q->dma_offset); - mapping = pci_map_single(pdev, skb->data, dma_len, - PCI_DMA_FROMDEVICE); - ce->skb = skb; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, dma_len); - e->AddrLow = (u32)mapping; - e->AddrHigh = (u64)mapping >> 32; - e->BufferLength = dma_len; - e->GenerationBit = e->GenerationBit2 = Q->genbit; - } + skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); e++; ce++; - if (++Q->pidx == Q->entries_n) { - Q->pidx = 0; - Q->genbit ^= 1; - ce = Q->centries; - e = Q->entries; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; } - Q->credits++; + q->credits++; } } /* - * Calls refill_free_list for both freelist Qs. If we cannot - * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order - * to give the system time to free up resources. + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. */ static void freelQs_empty(struct sge *sge) { - u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE); + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); u32 irqholdoff_reg; refill_free_list(sge, &sge->freelQ[0]); refill_free_list(sge, &sge->freelQ[1]); - if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) && - sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) { + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { irq_reg |= F_FL_EXHAUSTED; - irqholdoff_reg = sge->intrtimer[sge->currIndex]; + irqholdoff_reg = sge->fixed_intrtimer; } else { /* Clear the F_FL_EXHAUSTED interrupts for now */ irq_reg &= ~F_FL_EXHAUSTED; irqholdoff_reg = sge->intrtimer_nres; } - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg); + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); /* We reenable the Qs to force a freelist GTS interrupt later */ - doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE); + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); } #define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) @@ -816,10 +670,10 @@ static void freelQs_empty(struct sge *sge) */ void t1_sge_intr_disable(struct sge *sge) { - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0); + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); } /* @@ -828,12 +682,12 @@ void t1_sge_intr_disable(struct sge *sge) void t1_sge_intr_enable(struct sge *sge) { u32 en = SGE_INT_ENABLE; - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); if (sge->adapter->flags & TSO_CAPABLE) en &= ~F_PACKET_TOO_BIG; - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK); + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); } /* @@ -841,8 +695,8 @@ void t1_sge_intr_enable(struct sge *sge) */ void t1_sge_intr_clear(struct sge *sge) { - t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff); + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); } /* @@ -851,464 +705,673 @@ void t1_sge_intr_clear(struct sge *sge) int t1_sge_intr_error_handler(struct sge *sge) { struct adapter *adapter = sge->adapter; - u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE); + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); if (adapter->flags & TSO_CAPABLE) cause &= ~F_PACKET_TOO_BIG; if (cause & F_RESPQ_EXHAUSTED) - sge->intr_cnt.respQ_empty++; + sge->stats.respQ_empty++; if (cause & F_RESPQ_OVERFLOW) { - sge->intr_cnt.respQ_overflow++; + sge->stats.respQ_overflow++; CH_ALERT("%s: SGE response queue overflow\n", adapter->name); } if (cause & F_FL_EXHAUSTED) { - sge->intr_cnt.freelistQ_empty++; + sge->stats.freelistQ_empty++; freelQs_empty(sge); } if (cause & F_PACKET_TOO_BIG) { - sge->intr_cnt.pkt_too_big++; + sge->stats.pkt_too_big++; CH_ALERT("%s: SGE max packet size exceeded\n", adapter->name); } if (cause & F_PACKET_MISMATCH) { - sge->intr_cnt.pkt_mismatch++; + sge->stats.pkt_mismatch++; CH_ALERT("%s: SGE packet mismatch\n", adapter->name); } if (cause & SGE_INT_FATAL) t1_fatal_err(adapter); - t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause); + writel(cause, adapter->regs + A_SG_INT_CAUSE); return 0; } -/* - * The following code is copied from 2.6, where the skb_pull is doing the - * right thing and only pulls ETH_HLEN. +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +{ + return &sge->stats; +} + +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +{ + return &sge->port_stats[port]; +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle * - * Determine the packet's protocol ID. The rule here is that we - * assume 802.3 if the type field is short enough to be a length. - * This is normal practice and works for any 'now in use' protocol. + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. */ -static unsigned short sge_eth_type_trans(struct sk_buff *skb, - struct net_device *dev) +static void recycle_fl_buf(struct freelQ *fl, int idx) { - struct ethhdr *eth; - unsigned char *rawp; + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; - skb->mac.raw = skb->data; - skb_pull(skb, ETH_HLEN); - eth = (struct ethhdr *)skb->mac.raw; + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; - if (*eth->h_dest&1) { - if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; } +} - /* - * This ALLMULTI check should be redundant by 1.4 - * so don't forget to remove it. - * - * Seems, you forgot to remove it. All silly devices - * seems to set IFF_PROMISC. - */ +/** + * get_packet - return the next ingress packet buffer + * @pdev: the PCI device that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * @dma_pad: padding at beginning of buffer left by SGE DMA + * @skb_pad: padding to be used if the packet is copied + * @copy_thres: length threshold under which a packet should be copied + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct pci_dev *pdev, + struct freelQ *fl, unsigned int len, + int dma_pad, int skb_pad, + unsigned int copy_thres, + unsigned int drop_thres) +{ + struct sk_buff *skb; + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + + if (len < copy_thres) { + skb = alloc_skb(len + skb_pad, GFP_ATOMIC); + if (likely(skb != NULL)) { + skb_reserve(skb, skb_pad); + skb_put(skb, len); + pci_dma_sync_single_for_cpu(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + memcpy(skb->data, ce->skb->data + dma_pad, len); + pci_dma_sync_single_for_device(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; - else if (1 /*dev->flags&IFF_PROMISC*/) - { - if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) - skb->pkt_type=PACKET_OTHERHOST; + recycle_fl_buf(fl, fl->cidx); + return skb; } - if (ntohs(eth->h_proto) >= 1536) - return eth->h_proto; - - rawp = skb->data; + if (fl->credits < drop_thres) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } - /* - * This is a magic hack to spot IPX packets. Older Novell breaks - * the protocol design and runs IPX over 802.3 without an 802.2 LLC - * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This - * won't work for fault tolerant netware but does for the rest. - */ - if (*(unsigned short *)rawp == 0xFFFF) - return htons(ETH_P_802_3); +use_orig_buf: + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + skb = ce->skb; + skb_reserve(skb, dma_pad); + skb_put(skb, len); + return skb; +} - /* - * Real 802.2 LLC - */ - return htons(ETH_P_802_2); +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + CH_ERR("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); } /* - * Prepare the received buffer and pass it up the stack. If it is small enough - * and allocation doesn't fail, we use a new sk_buff and copy the content. + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. */ -static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q, - unsigned int len, unsigned int offload) +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) { - struct sk_buff *skb; - struct adapter *adapter = sge->adapter; - struct freelQ_ce *ce = &Q->centries[Q->cidx]; + dma_addr_t mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - if (len <= SGE_RX_COPY_THRESHOLD && - (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) { - struct freelQ_e *e; - char *src = ce->skb->data; + flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + e = &q->entries[pidx]; + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); + for (e1 = e, i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - pci_dma_sync_single_for_cpu(adapter->pdev, - pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - if (!offload) { - skb_reserve(skb, NET_IP_ALIGN); - src += sge->rx_pkt_pad; + ce++; + e1++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + ce = q->centries; + e1 = q->entries; } - memcpy(skb->data, src, len); - /* Reuse the entry. */ - e = &Q->entries[Q->cidx]; - e->GenerationBit ^= 1; - e->GenerationBit2 ^= 1; - } else { - pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - skb = ce->skb; - if (!offload && sge->rx_pkt_pad) - __skb_pull(skb, sge->rx_pkt_pad); + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + + e1->addr_lo = (u32)mapping; + e1->addr_hi = (u64)mapping >> 32; + e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); + e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); } - skb_put(skb, len); + ce->skb = skb; + wmb(); + e->flags = flags; +} +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; - if (unlikely(offload)) { - { - printk(KERN_ERR - "%s: unexpected offloaded packet, cmd %u\n", - adapter->name, *skb->data); - dev_kfree_skb_any(skb); - } - } else { - struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data; - - skb_pull(skb, sizeof(*p)); - skb->dev = adapter->port[p->iff].dev; - skb->dev->last_rx = jiffies; - skb->protocol = sge_eth_type_trans(skb, skb->dev); - if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && - skb->protocol == htons(ETH_P_IP) && - (skb->data[9] == IPPROTO_TCP || - skb->data[9] == IPPROTO_UDP)) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb->ip_summed = CHECKSUM_NONE; - if (adapter->vlan_grp && p->vlan_valid) - vlan_hwaccel_rx(skb, adapter->vlan_grp, - ntohs(p->vlan)); - else - netif_rx(skb); + if (reclaim) { + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; } +} - if (++Q->cidx == Q->entries_n) - Q->cidx = 0; +#ifndef SET_ETHTOOL_OPS +# define __netif_rx_complete(dev) netif_rx_complete(dev) +#endif - if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH)) - refill_free_list(sge, Q); - return 1; +/* + * We cannot use the standard netif_rx_schedule_prep() because we have multiple + * ports plus the TOE all multiplexing onto a single response queue, therefore + * accepting new responses cannot depend on the state of any particular port. + * So define our own equivalent that omits the netif_running() test. + */ +static inline int napi_schedule_prep(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); } -/* - * Adaptive interrupt timer logic to keep the CPU utilization to - * manageable levels. Basically, as the Average Packet Size (APS) - * gets higher, the interrupt latency setting gets longer. Every - * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the - * base value of SGE_INTRTIMER0. At large values of payload the - * latency hits the ceiling value of SGE_INTRTIMER1 stored at - * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[]. +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length * - * sge->currIndex caches the last index to save unneeded PIOs. + * Process an ingress ethernet pakcet and deliver it to the stack. */ -static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload) +static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) { - unsigned int newIndex; + struct sk_buff *skb; + struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; - newIndex = avg_payload / SGE_INTR_BUCKETSIZE; - if (newIndex > SGE_INTR_MAXBUCKETS - 1) { - newIndex = SGE_INTR_MAXBUCKETS - 1; - } - /* Save a PIO with this check....maybe */ - if (newIndex != sge->currIndex) { - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, - sge->intrtimer[newIndex]); - sge->currIndex = newIndex; - sge->adapter->params.sge.last_rx_coalesce_raw = - sge->intrtimer[newIndex]; + sge->stats.ethernet_pkts++; + skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, + sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, + SGE_RX_DROP_THRES); + if (!skb) { + sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + return 0; } + + p = (struct cpl_rx_pkt *)skb->data; + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + sge->port_stats[p->iff].rx_cso_good++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(adapter->vlan_grp && p->vlan_valid)) { + sge->port_stats[p->iff].vlan_xtract++; + if (adapter->params.sge.polling) + vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + } else if (adapter->params.sge.polling) + netif_receive_skb(skb); + else + netif_rx(skb); + return 0; } /* - * Returns true if command queue q_num has enough available descriptors that + * Returns true if a command queue has enough available descriptors that * we can resume Tx operation after temporarily disabling its packet queue. */ -static inline int enough_free_Tx_descs(struct sge *sge, int q_num) +static inline int enough_free_Tx_descs(const struct cmdQ *q) { - return atomic_read(&sge->cmdQ[q_num].credits) > - (sge->cmdQ[q_num].entries_n >> 2); + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); } /* - * Main interrupt handler, optimized assuming that we took a 'DATA' - * interrupt. - * - * 1. Clear the interrupt - * 2. Loop while we find valid descriptors and process them; accumulate - * information that can be processed after the loop - * 3. Tell the SGE at which index we stopped processing descriptors - * 4. Bookkeeping; free TX buffers, ring doorbell if there are any - * outstanding TX buffers waiting, replenish RX buffers, potentially - * reenable upper layers if they were turned off due to lack of TX - * resources which are available again. - * 5. If we took an interrupt, but no valid respQ descriptors was found we - * let the slow_intr_handler run and do error handling. + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. */ -irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +static void restart_tx_queues(struct sge *sge) { - struct net_device *netdev; - struct adapter *adapter = cookie; - struct sge *sge = adapter->sge; - struct respQ *Q = &sge->respQ; - unsigned int credits = Q->credits, flags = 0, ret = 0; - unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0; - unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 }; + struct adapter *adap = sge->adapter; - struct respQ_e *e = &Q->entries[Q->cidx]; - prefetch(e); + if (enough_free_Tx_descs(&sge->cmdQ[0])) { + int i; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, + &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[3]++; + netif_wake_queue(nd); + } + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA); + cmdq->processed += pr0; + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); - while (e->GenerationBit == Q->genbit) { - if (--credits < SGE_RESPQ_REPLENISH_THRES) { - u32 n = Q->entries_n - credits - 1; + return flags; +} - t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n); - credits += n; +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int budget_left = budget; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + + while (likely(budget_left && e->GenerationBit == q->genbit)) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; } if (likely(e->DataValid)) { - if (!e->Sop || !e->Eop) + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + if (unlikely(!e->Sop || !e->Eop)) BUG(); - t1_sge_rx(sge, &sge->freelQ[e->FreelistQid], - e->BufferLength, e->Offload); - tot_rxpayload += e->BufferLength; - ++n_rx; - } - flags |= e->Qsleeping; - credits_pend[0] += e->Cmdq0CreditReturn; - credits_pend[1] += e->Cmdq1CreditReturn; + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; -#ifdef CONFIG_SMP - /* - * If enough cmdQ0 buffers have finished DMAing free them so - * anyone that may be waiting for their release can continue. - * We do this only on MP systems to allow other CPUs to proceed - * promptly. UP systems can wait for the free_cmdQ_buffers() - * calls after this loop as the sole CPU is currently busy in - * this loop. - */ - if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) { - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], - &tot_txpayload); - n_tx += credits_pend[0]; - credits_pend[0] = 0; - } -#endif - ret++; e++; - if (unlikely(++Q->cidx == Q->entries_n)) { - Q->cidx = 0; - Q->genbit ^= 1; - e = Q->entries; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } + --budget_left; } - Q->credits = credits; - t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - if (credits_pend[0]) - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload); - if (credits_pend[1]) - free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload); + budget -= budget_left; + return budget; +} - /* Do any coalescing and interrupt latency timer adjustments */ - if (adapter->params.sge.coalesce_enable) { - unsigned int avg_txpayload = 0, avg_rxpayload = 0; +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; - n_tx += credits_pend[0] + credits_pend[1]; + do { + flags |= e->Qsleeping; - /* - * Choose larger avg. payload size to increase - * throughput and reduce [CPU util., intr/s.] - * - * Throughput behavior favored in mixed-mode. - */ - if (n_tx) - avg_txpayload = tot_txpayload/n_tx; - if (n_rx) - avg_rxpayload = tot_rxpayload/n_rx; - - if (n_tx && avg_txpayload > avg_rxpayload){ - update_intr_timer(sge, avg_txpayload); - } else if (n_rx) { - update_intr_timer(sge, avg_rxpayload); + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; } - } - - if (flags & F_CMDQ0_ENABLE) { - struct cmdQ *cmdQ = &sge->cmdQ[0]; + prefetch(e); - atomic_set(&cmdQ->asleep, 1); - if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) { - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&cmdQ->pio_pidx, cmdQ->pidx); + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } - } - if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE))) - freelQs_empty(sge); + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); - netdev = adapter->port[0].dev; - if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && - enough_free_Tx_descs(sge, 0) && - enough_free_Tx_descs(sge, 1))) { - netif_wake_queue(netdev); - } - if (unlikely(!ret)) - ret = t1_slow_intr_handler(adapter); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - return IRQ_RETVAL(ret != 0); + return e->GenerationBit == q->genbit; } /* - * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. - * - * The code figures out how many entries the sk_buff will require in the - * cmdQ and updates the cmdQ data structure with the state once the enqueue - * has complete. Then, it doesn't access the global structure anymore, but - * uses the corresponding fields on the stack. In conjuction with a spinlock - * around that code, we can make the function reentrant without holding the - * lock when we actually enqueue (which might be expensive, especially on - * architectures with IO MMUs). + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. */ -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid) +static int t1_poll(struct net_device *dev, int *budget) { - struct sge *sge = adapter->sge; - struct cmdQ *Q = &sge->cmdQ[qid]; - struct cmdQ_e *e; - struct cmdQ_ce *ce; - dma_addr_t mapping; - unsigned int credits, pidx, genbit; + struct adapter *adapter = dev->priv; + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; + dev->quota -= work_done; - unsigned int count = 1 + skb_shinfo(skb)->nr_frags; + if (work_done >= effective_budget) + return 1; + + __netif_rx_complete(dev); /* - * Coming from the timer + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. */ - if ((skb == sge->pskb)) { - /* - * Quit if any cmdQ activities - */ - if (!spin_trylock(&Q->Qlock)) - return 0; - if (atomic_read(&Q->credits) != Q->entries_n) { - spin_unlock(&Q->Qlock); - return 0; - } - } - else - spin_lock(&Q->Qlock); - - genbit = Q->genbit; - pidx = Q->pidx; - credits = atomic_read(&Q->credits); - - credits -= count; - atomic_sub(count, &Q->credits); - Q->pidx += count; - if (Q->pidx >= Q->entries_n) { - Q->pidx -= Q->entries_n; - Q->genbit ^= 1; - } + writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + return 0; +} - if (unlikely(credits < (MAX_SKB_FRAGS + 1))) { - sge->intr_cnt.cmdQ_full[qid]++; - netif_stop_queue(adapter->port[0].dev); - } - spin_unlock(&Q->Qlock); +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} - mapping = pci_map_single(adapter->pdev, skb->data, - skb->len - skb->data_len, PCI_DMA_TODEVICE); - ce = &Q->centries[pidx]; - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - ce->single = 1; +/* + * NAPI version of the main interrupt handler. + */ +static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs) +{ + int handled; + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + struct respQ *q = &adapter->sge->respQ; - e = &Q->entries[pidx]; - e->Sop = 1; - e->DataValid = 1; - e->BufferLength = skb->len - skb->data_len; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; + /* + * Clear the SGE_DATA interrupt first thing. Normally the NAPI + * handler has control of the response queue and the interrupt handler + * can look at the queue reliably only once it knows NAPI is off. + * We can't wait that long to clear the SGE_DATA interrupt because we + * could race with t1_poll rearming the SGE interrupt, so we need to + * clear the interrupt speculatively and really early on. + */ + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + spin_lock(&adapter->async_lock); + if (!napi_is_scheduled(sge->netdev)) { + struct respQ_e *e = &q->entries[q->cidx]; + + if (e->GenerationBit == q->genbit) { + if (e->DataValid || + process_pure_responses(adapter, e)) { + if (likely(napi_schedule_prep(sge->netdev))) + __netif_rx_schedule(sge->netdev); + else + printk(KERN_CRIT + "NAPI schedule failure!\n"); + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; + goto unlock; + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) + printk(KERN_ERR "data interrupt while NAPI running\n"); + + handled = t1_slow_intr_handler(adapter); + if (!handled) + sge->stats.unhandled_irqs++; + unlock: + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(handled != 0); +} - if (--count > 0) { - unsigned int i; +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + int work_done; + struct respQ_e *e; + struct adapter *adapter = cookie; + struct respQ *Q = &adapter->sge->respQ; - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + spin_lock(&adapter->async_lock); + e = &Q->entries[Q->cidx]; + prefetch(e); - for (i = 0; i < count; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); - ce++; e++; - if (++pidx == Q->entries_n) { - pidx = 0; - genbit ^= 1; - ce = Q->centries; - e = Q->entries; - } + if (likely(e->GenerationBit == Q->genbit)) + work_done = process_responses(adapter, -1); + else + work_done = t1_slow_intr_handler(adapter); - mapping = pci_map_page(adapter->pdev, frag->page, - frag->page_offset, - frag->size, - PCI_DMA_TODEVICE); - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, frag->size); - ce->single = 0; - - e->Sop = 0; - e->DataValid = 1; - e->BufferLength = frag->size; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; - - if (i < count - 1) { - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; - } + /* + * The unconditional clearing of the PL_CAUSE above may have raced + * with DMA completion and the corresponding generation of a response + * to cause us to miss the resulting data interrupt. The next write + * is also unconditional to recover the missed interrupt and render + * this race harmless. + */ + writel(Q->cidx, adapter->regs + A_SG_SLEEPING); + + if (!work_done) + adapter->sge->stats.unhandled_irqs++; + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(work_done != 0); +} + +intr_handler_t t1_select_intr_handler(adapter_t *adapter) +{ + return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + + { /* Ethernet packet */ + if (unlikely(credits < count)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[3]++; + spin_unlock(&q->lock); + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return 1; } + if (unlikely(credits - count < q->stop_thres)) { + sge->stats.cmdQ_full[3]++; + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + } + } + q->in_use += count; + genbit = q->genbit; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; } + spin_unlock(&q->lock); - if (skb != sge->pskb) - ce->skb = skb; - e->Eop = 1; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + write_tx_descs(adapter, skb, pidx, genbit, q); /* * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring @@ -1317,50 +1380,50 @@ static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, * then the interrupt handler will detect the outstanding TX packet * and ring the doorbell for us. */ - if (qid) { - doorbell_pio(sge, F_CMDQ1_ENABLE); - } else if (atomic_read(&Q->asleep)) { - atomic_set(&Q->asleep, 0); - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&Q->pio_pidx, Q->pidx); + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } } return 0; } #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + /* * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. */ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct adapter *adapter = dev->priv; + struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; + struct sge *sge = adapter->sge; struct cpl_tx_pkt *cpl; - struct ethhdr *eth; - size_t max_len; - - /* - * We are using a non-standard hard_header_len and some kernel - * components, such as pktgen, do not handle it right. Complain - * when this happens but try to fix things up. - */ - if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { - struct sk_buff *orig_skb = skb; - - if (net_ratelimit()) - printk(KERN_ERR - "%s: Tx packet has inadequate headroom\n", - dev->name); - skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); - dev_kfree_skb_any(orig_skb); - if (!skb) - return -ENOMEM; - } +#ifdef NETIF_F_TSO if (skb_shinfo(skb)->tso_size) { int eth_type; struct cpl_tx_pkt_lso *hdr; + st->tso++; + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? CPL_ETH_II : CPL_ETH_II_VLAN; @@ -1373,40 +1436,72 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_shinfo(skb)->tso_size)); hdr->len = htonl(skb->len - sizeof(*hdr)); cpl = (struct cpl_tx_pkt *)hdr; + sge->stats.tx_lso_pkts++; } else +#endif { /* - * An Ethernet packet must have at least space for - * the DIX Ethernet header and be no greater than - * the device set MTU. Otherwise trash the packet. + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. */ - if (skb->len < ETH_HLEN) - goto t1_start_xmit_fail2; - eth = (struct ethhdr *)skb->data; - if (eth->h_proto == htons(ETH_P_8021Q)) - max_len = dev->mtu + VLAN_ETH_HLEN; - else - max_len = dev->mtu + ETH_HLEN; - if (skb->len > max_len) - goto t1_start_xmit_fail2; + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + dev_kfree_skb_any(skb); + return NET_XMIT_SUCCESS; + } + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. + * Complain when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < + dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR "%s: inadequate headroom in " + "Tx packet\n", dev->name); + skb = skb_realloc_headroom(skb, sizeof(*cpl)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } if (!(adapter->flags & UDP_CSUM_CAPABLE) && skb->ip_summed == CHECKSUM_HW && - skb->nh.iph->protocol == IPPROTO_UDP && - skb_checksum_help(skb, 0)) - goto t1_start_xmit_fail3; - + skb->nh.iph->protocol == IPPROTO_UDP) + if (unlikely(skb_checksum_help(skb, 0))) { + dev_kfree_skb_any(skb); + return -ENOMEM; + } - if (!adapter->sge->pskb) { + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if (unlikely(!adapter->sge->espibug_skb)) { if (skb->protocol == htons(ETH_P_ARP) && - skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) - adapter->sge->pskb = skb; + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } } - cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl)); + + cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl)); cpl->opcode = CPL_TX_PKT; cpl->ip_csum_dis = 1; /* SW calculates IP csum */ cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_reg_pkts++; } cpl->iff = dev->if_port; @@ -1414,38 +1509,176 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { cpl->vlan_valid = 1; cpl->vlan = htons(vlan_tx_tag_get(skb)); + st->vlan_insert++; } else #endif cpl->vlan_valid = 0; dev->trans_start = jiffies; - return t1_sge_tx(skb, adapter, 0); + return t1_sge_tx(skb, adapter, 0, dev); +} -t1_start_xmit_fail3: - printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name); - goto t1_start_xmit_fail1; +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(unsigned long data) +{ + int i; + struct sge *sge = (struct sge *)data; + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; -t1_start_xmit_fail2: - printk(KERN_INFO "%s: Invalid packet length %d, dropping\n", - dev->name, skb->len); + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) /* flush pending credits */ + writel(F_CMDQ0_ENABLE, + sge->adapter->regs + A_SG_DOORBELL); -t1_start_xmit_fail1: - dev_kfree_skb_any(skb); + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->netdev->poll = t1_poll; + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); return 0; } -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val) +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) { - struct sge *sge = adapter->sge; + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} - if (is_T2(adapter)) - sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1); +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + writel(0, sge->adapter->regs + A_SG_CONTROL); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); } -u32 t1_sge_get_ptimeout(adapter_t *adapter) +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) { + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; struct sge *sge = adapter->sge; - return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0); + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb; + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); } +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + init_timer(&sge->tx_reclaim_timer); + sge->tx_reclaim_timer.data = (unsigned long)sge; + sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; + + if (is_T2(sge->adapter)) { + init_timer(&sge->espibug_timer); + sge->espibug_timer.function = (void *)&espibug_workaround; + sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + p->polling = 0; + + return sge; +} diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 140f896def6..434b2558685 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.h * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.11 $ * + * $Date: 2005/06/21 22:10:55 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,25 +36,50 @@ * * ****************************************************************************/ -#ifndef _CHELSIO_LINUX_SGE_H_ -#define _CHELSIO_LINUX_SGE_H_ +#ifndef _CXGB_SGE_H_ +#define _CXGB_SGE_H_ #include #include #include +#ifndef IRQ_RETVAL +#define IRQ_RETVAL(x) +typedef void irqreturn_t; +#endif + +typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *); + struct sge_intr_counts { unsigned int respQ_empty; /* # times respQ empty */ unsigned int respQ_overflow; /* # respQ overflow (fatal) */ unsigned int freelistQ_empty; /* # times freelist empty */ unsigned int pkt_too_big; /* packet too large (fatal) */ unsigned int pkt_mismatch; - unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */ + unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ + unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ + unsigned int ethernet_pkts; /* # of Ethernet packets received */ + unsigned int offload_pkts; /* # of offload packets received */ + unsigned int offload_bundles; /* # of offload pkt bundles delivered */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ + unsigned int tx_ipfrags; + unsigned int tx_reg_pkts; + unsigned int tx_lso_pkts; + unsigned int tx_do_cksum; +}; + +struct sge_port_stats { + unsigned long rx_cso_good; /* # of successful RX csum offloads */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_xtract; /* # of VLAN tag extractions */ + unsigned long vlan_insert; /* # of VLAN tag extractions */ + unsigned long tso; /* # of TSO requests */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ }; struct sk_buff; struct net_device; -struct cxgbdev; struct adapter; struct sge_params; struct sge; @@ -63,7 +88,9 @@ struct sge *t1_sge_create(struct adapter *, struct sge_params *); int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); -irqreturn_t t1_interrupt(int, void *, struct pt_regs *); +intr_handler_t t1_select_intr_handler(adapter_t *adapter); +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *netdev); int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); @@ -72,8 +99,7 @@ int t1_sge_intr_error_handler(struct sge *); void t1_sge_intr_enable(struct sge *); void t1_sge_intr_disable(struct sge *); void t1_sge_intr_clear(struct sge *); +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val); -u32 t1_sge_get_ptimeout(adapter_t *adapter); - -#endif /* _CHELSIO_LINUX_SGE_H_ */ +#endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index a90a3f95fca..1ebb5d149ae 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: subr.c * - * $Revision: 1.12 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.27 $ * + * $Date: 2005/06/22 01:08:36 $ * * Description: * * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -40,11 +40,9 @@ #include "common.h" #include "elmer0.h" #include "regs.h" - #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" /** @@ -64,7 +62,7 @@ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, int attempts, int delay) { while (1) { - u32 val = t1_read_reg_4(adapter, reg) & mask; + u32 val = readl(adapter->regs + reg) & mask; if (!!val == polarity) return 0; @@ -84,9 +82,9 @@ static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_WR_DATA, value); - t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(value, adapter->regs + A_TPI_WR_DATA); + writel(F_TPIWR, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -100,9 +98,9 @@ int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_write(adapter, addr, value); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } @@ -113,8 +111,8 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_CSR, 0); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(0, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -122,7 +120,7 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) CH_ALERT("%s: TPI read from 0x%x failed\n", adapter->name, addr); else - *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA); + *valp = readl(adapter->regs + A_TPI_RD_DATA); return tpi_busy; } @@ -130,20 +128,12 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_read(adapter, addr, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } -/* - * Set a TPI parameter. - */ -static void t1_tpi_par(adapter_t *adapter, u32 value) -{ - t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value)); -} - /* * Called when a port's link settings change to propagate the new values to the * associated PHY and MAC. After performing the common tasks it invokes an @@ -227,7 +217,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -242,7 +232,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, /* Read the data. */ __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -251,7 +241,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -264,7 +254,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -277,7 +267,6 @@ static struct mdio_ops mi1_mdio_ext_ops = { enum { CH_BRD_N110_1F, CH_BRD_N210_1F, - CH_BRD_T210_1F, }; static struct board_info t1_board[] = { @@ -308,13 +297,15 @@ struct pci_device_id t1_pci_tbl[] = { { 0, } }; +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + /* * Return the board_info structure with a given index. Out-of-range indices * return NULL. */ const struct board_info *t1_get_board_info(unsigned int board_id) { - return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL; + return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; } struct chelsio_vpd_t { @@ -436,7 +427,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); switch (board_info(adapter)->board) { - case CHBT_BOARD_CHT210: case CHBT_BOARD_N210: case CHBT_BOARD_N110: if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ @@ -446,23 +436,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) link_changed(adapter, 0); } break; - case CHBT_BOARD_8000: - case CHBT_BOARD_CHT110: - CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", - cause); - if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ - struct cmac *mac = adapter->port[0].mac; - - mac->ops->interrupt_handler(mac); - } - if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ - u32 mod_detect; - - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - CH_MSG(adapter, INFO, LINK, "XPAK %s\n", - mod_detect ? "removed" : "inserted"); - } - break; } t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); return 0; @@ -472,11 +445,11 @@ int elmer0_ext_intr_handler(adapter_t *adapter) void t1_interrupts_enable(adapter_t *adapter) { unsigned int i; + u32 pl_intr; - adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; t1_sge_intr_enable(adapter->sge); - t1_tp_intr_enable(adapter->tp); if (adapter->espi) { adapter->slow_intr_mask |= F_PL_INTR_ESPI; t1_espi_intr_enable(adapter->espi); @@ -489,17 +462,15 @@ void t1_interrupts_enable(adapter_t *adapter) } /* Enable PCIX & external chip interrupts on ASIC boards. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE); + pl_intr = readl(adapter->regs + A_PL_ENABLE); - /* PCI-X interrupts */ - pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, - 0xffffffff); + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); - adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr); - } + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); } /* Disables all interrupts. */ @@ -508,7 +479,6 @@ void t1_interrupts_disable(adapter_t* adapter) unsigned int i; t1_sge_intr_disable(adapter->sge); - t1_tp_intr_disable(adapter->tp); if (adapter->espi) t1_espi_intr_disable(adapter->espi); @@ -519,8 +489,7 @@ void t1_interrupts_disable(adapter_t* adapter) } /* Disable PCIX & external chip interrupts. */ - if (t1_is_asic(adapter)) - t1_write_reg_4(adapter, A_PL_ENABLE, 0); + writel(0, adapter->regs + A_PL_ENABLE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); @@ -532,9 +501,10 @@ void t1_interrupts_disable(adapter_t* adapter) void t1_interrupts_clear(adapter_t* adapter) { unsigned int i; + u32 pl_intr; + t1_sge_intr_clear(adapter->sge); - t1_tp_intr_clear(adapter->tp); if (adapter->espi) t1_espi_intr_clear(adapter->espi); @@ -545,12 +515,10 @@ void t1_interrupts_clear(adapter_t* adapter) } /* Enable interrupts for external devices. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE); + pl_intr = readl(adapter->regs + A_PL_CAUSE); - t1_write_reg_4(adapter, A_PL_CAUSE, - pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX); - } + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); @@ -559,17 +527,15 @@ void t1_interrupts_clear(adapter_t* adapter) /* * Slow path interrupt handler for ASICs. */ -static int asic_slow_intr(adapter_t *adapter) +int t1_slow_intr_handler(adapter_t *adapter) { - u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE); + u32 cause = readl(adapter->regs + A_PL_CAUSE); cause &= adapter->slow_intr_mask; if (!cause) return 0; if (cause & F_PL_INTR_SGE_ERR) t1_sge_intr_error_handler(adapter->sge); - if (cause & F_PL_INTR_TP) - t1_tp_intr_handler(adapter->tp); if (cause & F_PL_INTR_ESPI) t1_espi_intr_handler(adapter->espi); if (cause & F_PL_INTR_PCIX) @@ -578,41 +544,82 @@ static int asic_slow_intr(adapter_t *adapter) t1_elmer0_ext_intr(adapter); /* Clear the interrupts just processed. */ - t1_write_reg_4(adapter, A_PL_CAUSE, cause); - (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */ + writel(cause, adapter->regs + A_PL_CAUSE); + (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ return 1; } -int t1_slow_intr_handler(adapter_t *adapter) +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) +{ + u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) { - return asic_slow_intr(adapter); + set_csum_offload(adapter, F_IP_CSUM, enable); } -/* Power sequencing is a work-around for Intel's XPAKs. */ -static void power_sequence_xpak(adapter_t* adapter) +void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) { - u32 mod_detect; - u32 gpo; + set_csum_offload(adapter, F_UDP_CSUM, enable); +} - /* Check for XPAK */ - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - if (!(ELMER0_GP_BIT5 & mod_detect)) { - /* XPAK is present */ - t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); - gpo |= ELMER0_GP_BIT18; - t1_tpi_write(adapter, A_ELMER0_GPO, gpo); +void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_TCP_CSUM, enable); +} + +static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +{ + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, adapter->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + adapter->regs + A_TP_OUT_CONFIG); + + val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(adapter)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + adapter->regs + A_TP_TX_DROP_CONFIG); } + + writel(F_TP_RESET, adapter->regs + A_TP_RESET); } int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p) { p->chip_version = bi->chip_term; - p->is_asic = (p->chip_version != CHBT_TERM_FPGA); if (p->chip_version == CHBT_TERM_T1 || - p->chip_version == CHBT_TERM_T2 || - p->chip_version == CHBT_TERM_FPGA) { - u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG); + p->chip_version == CHBT_TERM_T2) { + u32 val = readl(adapter->regs + A_TP_PC_CONFIG); val = G_TP_PC_REV(val); if (val == 2) @@ -633,23 +640,11 @@ int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, static int board_init(adapter_t *adapter, const struct board_info *bi) { switch (bi->board) { - case CHBT_BOARD_8000: case CHBT_BOARD_N110: case CHBT_BOARD_N210: - case CHBT_BOARD_CHT210: - case CHBT_BOARD_COUGAR: - t1_tpi_par(adapter, 0xf); + writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); break; - case CHBT_BOARD_CHT110: - t1_tpi_par(adapter, 0xf); - t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); - - /* TBD XXX Might not need. This fixes a problem - * described in the Intel SR XPAK errata. - */ - power_sequence_xpak(adapter); - break; } return 0; } @@ -663,20 +658,19 @@ int t1_init_hw_modules(adapter_t *adapter) int err = -EIO; const struct board_info *bi = board_info(adapter); - if (!adapter->mc4) { - u32 val = t1_read_reg_4(adapter, A_MC4_CFG); + if (!bi->clock_mc4) { + u32 val = readl(adapter->regs + A_MC4_CFG); - t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW); - t1_write_reg_4(adapter, A_MC5_CONFIG, - F_M_BUS_ENABLE | F_TCAM_RESET); + writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); + writel(F_M_BUS_ENABLE | F_TCAM_RESET, + adapter->regs + A_MC5_CONFIG); } if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, bi->espi_nports)) goto out_err; - if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) - goto out_err; + t1_tp_reset(adapter, bi->clock_core); err = t1_sge_configure(adapter->sge, &adapter->params.sge); if (err) @@ -690,7 +684,7 @@ int t1_init_hw_modules(adapter_t *adapter) /* * Determine a card's PCI mode. */ -static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) { static unsigned short speed_map[] = { 33, 66, 100, 133 }; u32 pci_mode; @@ -720,8 +714,6 @@ void t1_free_sw_modules(adapter_t *adapter) if (adapter->sge) t1_sge_destroy(adapter->sge); - if (adapter->tp) - t1_tp_destroy(adapter->tp); if (adapter->espi) t1_espi_destroy(adapter->espi); } @@ -764,21 +756,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, goto error; } - - if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { CH_ERR("%s: ESPI initialization failed\n", adapter->name); goto error; } - adapter->tp = t1_tp_create(adapter, &adapter->params.tp); - if (!adapter->tp) { - CH_ERR("%s: TP initialization failed\n", - adapter->name); - goto error; - } - board_init(adapter, bi); bi->mdio_ops->init(adapter, bi); if (bi->gphy->reset) @@ -810,14 +793,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, * Get the port's MAC addresses either from the EEPROM if one * exists or the one hardcoded in the MAC. */ - if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) - mac->ops->macaddress_get(mac, hw_addr); - else if (vpd_macaddress_get(adapter, i, hw_addr)) { + if (vpd_macaddress_get(adapter, i, hw_addr)) { CH_ERR("%s: could not read MAC address from VPD ROM\n", - port_name(adapter, i)); + adapter->port[i].dev->name); goto error; } - t1_set_hw_addr(adapter, i, hw_addr); + memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); init_link_config(&adapter->port[i].link_config, bi); } diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h index 98352bdda89..81816c2b708 100644 --- a/drivers/net/chelsio/suni1x10gexp_regs.h +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: suni1x10gexp_regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.9 $ * + * $Date: 2005/06/22 00:17:04 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -21,24 +21,16 @@ * * * http://www.chelsio.com * * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * * Maintainers: maintainers@chelsio.com * * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * + * Authors: PMC/SIERRA * * * * History: * * * ****************************************************************************/ -#ifndef _SUNI1x10GEXP_REGS_H -#define _SUNI1x10GEXP_REGS_H +#ifndef _CXGB_SUNI1x10GEXP_REGS_H_ +#define _CXGB_SUNI1x10GEXP_REGS_H_ /******************************************************************************/ /** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ @@ -217,5 +209,5 @@ #define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 #define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 -#endif /* _SUNI1x10GEXP_REGS_H */ +#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c deleted file mode 100644 index 9ad5c539fd2..00000000000 --- a/drivers/net/chelsio/tp.c +++ /dev/null @@ -1,188 +0,0 @@ -/***************************************************************************** - * * - * File: tp.c * - * $Revision: 1.6 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * Core ASIC Management. * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#include "common.h" -#include "regs.h" -#include "tp.h" - -struct petp { - adapter_t *adapter; -}; - -/* Pause deadlock avoidance parameters */ -#define DROP_MSEC 16 -#define DROP_PKTS_CNT 1 - - -static void tp_init(adapter_t *ap, const struct tp_params *p, - unsigned int tp_clk) -{ - if (t1_is_asic(ap)) { - u32 val; - - val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | - F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; - if (!p->pm_size) - val |= F_OFFLOAD_DISABLE; - else - val |= F_TP_IN_ESPI_CHECK_IP_CSUM | - F_TP_IN_ESPI_CHECK_TCP_CSUM; - t1_write_reg_4(ap, A_TP_IN_CONFIG, val); - t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL | - F_TP_OUT_ESPI_ETHERNET | - F_TP_OUT_ESPI_GENERATE_IP_CSUM | - F_TP_OUT_ESPI_GENERATE_TCP_CSUM); - t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) | - F_PATH_MTU /* IP DF bit */ | - V_5TUPLE_LOOKUP(p->use_5tuple_mode) | - V_SYN_COOKIE_PARAMETER(29)); - - /* - * Enable pause frame deadlock prevention. - */ - if (is_T2(ap)) { - u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); - - t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG, - F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | - V_DROP_TICKS_CNT(drop_ticks) | - V_NUM_PKTS_DROPPED(DROP_PKTS_CNT)); - } - - } -} - -void t1_tp_destroy(struct petp *tp) -{ - kfree(tp); -} - -struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p) -{ - struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL); - if (!tp) - return NULL; - memset(tp, 0, sizeof(*tp)); - tp->adapter = adapter; - - return tp; -} - -void t1_tp_intr_enable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - /* We don't use any TP interrupts */ - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr | F_PL_INTR_TP); - } -} - -void t1_tp_intr_disable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr & ~F_PL_INTR_TP); - } -} - -void t1_tp_intr_clear(struct petp *tp) -{ - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff); - t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP); -} - -int t1_tp_intr_handler(struct petp *tp) -{ - u32 cause; - - - cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE); - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause); - return 0; -} - -static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) -{ - u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG); - - if (enable) - val |= csum_bit; - else - val &= ~csum_bit; - t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val); -} - -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_IP_CSUM, enable); -} - -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_UDP_CSUM, enable); -} - -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_TCP_CSUM, enable); -} - -/* - * Initialize TP state. tp_params contains initial settings for some TP - * parameters, particularly the one-time PM and CM settings. - */ -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) -{ - int busy = 0; - adapter_t *adapter = tp->adapter; - - tp_init(adapter, p, tp_clk); - if (!busy) - t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET); - else - CH_ERR("%s: TP initialization timed out\n", - adapter->name); - return busy; -} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h deleted file mode 100644 index 2ebc5c0d62e..00000000000 --- a/drivers/net/chelsio/tp.h +++ /dev/null @@ -1,110 +0,0 @@ -/***************************************************************************** - * * - * File: tp.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef CHELSIO_TP_H -#define CHELSIO_TP_H - -#include "common.h" - -#define TP_MAX_RX_COALESCING_SIZE 16224U - -struct tp_mib_statistics { - - /* IP */ - u32 ipInReceive_hi; - u32 ipInReceive_lo; - u32 ipInHdrErrors_hi; - u32 ipInHdrErrors_lo; - u32 ipInAddrErrors_hi; - u32 ipInAddrErrors_lo; - u32 ipInUnknownProtos_hi; - u32 ipInUnknownProtos_lo; - u32 ipInDiscards_hi; - u32 ipInDiscards_lo; - u32 ipInDelivers_hi; - u32 ipInDelivers_lo; - u32 ipOutRequests_hi; - u32 ipOutRequests_lo; - u32 ipOutDiscards_hi; - u32 ipOutDiscards_lo; - u32 ipOutNoRoutes_hi; - u32 ipOutNoRoutes_lo; - u32 ipReasmTimeout; - u32 ipReasmReqds; - u32 ipReasmOKs; - u32 ipReasmFails; - - u32 reserved[8]; - - /* TCP */ - u32 tcpActiveOpens; - u32 tcpPassiveOpens; - u32 tcpAttemptFails; - u32 tcpEstabResets; - u32 tcpOutRsts; - u32 tcpCurrEstab; - u32 tcpInSegs_hi; - u32 tcpInSegs_lo; - u32 tcpOutSegs_hi; - u32 tcpOutSegs_lo; - u32 tcpRetransSeg_hi; - u32 tcpRetransSeg_lo; - u32 tcpInErrs_hi; - u32 tcpInErrs_lo; - u32 tcpRtoMin; - u32 tcpRtoMax; -}; - -struct petp; -struct tp_params; - -struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); -void t1_tp_destroy(struct petp *tp); - -void t1_tp_intr_disable(struct petp *tp); -void t1_tp_intr_enable(struct petp *tp); -void t1_tp_intr_clear(struct petp *tp); -int t1_tp_intr_handler(struct petp *tp); - -void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); -int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); -#endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 63e89e47b8e..41e35a72b96 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2120,6 +2120,7 @@ #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -- cgit v1.2.3-70-g09d2 From 4689ced99b18937e28c0f6c190394ccc3c61d651 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Fri, 29 Jul 2005 15:33:58 -0400 Subject: [netdrvr] add 'uli526x' driver (a tulip clone) We want to extract our LAN card driver from tulip core driver and make a new file uli526x.c at tulip folder, because we have added some ethtool interface support and non-eprom support in our driver and may be other change in the futher. If our controllers support are still contained in the tulip core driver, I think it'll increase the complexity of maintenance, you know, tulip core driver include several files and support so many other controllers. Furthermore, I tested the newest kernel 2.6.12 and I found the tulip driver can not work on our lan controller, and I no time to debug it, so I aspired want to make a single uli526x.c file just for our controllers. Could you help us remove the ULi m5261/m5263 lan controller support from tulip core driver and add the new single uli526x.c file for us? Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik --- drivers/net/tulip/Kconfig | 12 + drivers/net/tulip/Makefile | 1 + drivers/net/tulip/uli526x.c | 1770 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1783 insertions(+) create mode 100644 drivers/net/tulip/uli526x.c (limited to 'drivers') diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index e2cdaf87620..8c9634a98c1 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -135,6 +135,18 @@ config DM9102 . The module will be called dmfe. +config ULI526X + tristate "ULi M526x controller support" + depends on NET_TULIP && PCI + select CRC32 + ---help--- + This driver is for ULi M5261/M5263 10/100M Ethernet Controller + (). + + To compile this driver as a module, choose M here and read + . The module will + be called uli526x. + config PCMCIA_XIRCOM tristate "Xircom CardBus support (new driver)" depends on NET_TULIP && CARDBUS diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile index 8bb9b468397..451090d6fcc 100644 --- a/drivers/net/tulip/Makefile +++ b/drivers/net/tulip/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o obj-$(CONFIG_DE2104X) += de2104x.o obj-$(CONFIG_TULIP) += tulip.o obj-$(CONFIG_DE4X5) += de4x5.o +obj-$(CONFIG_ULI526X) += uli526x.o # Declare multi-part drivers. diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c new file mode 100644 index 00000000000..27f99e087f7 --- /dev/null +++ b/drivers/net/tulip/uli526x.c @@ -0,0 +1,1770 @@ +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + +*/ + +#define DRV_NAME "uli526x" +#define DRV_VERSION "0.9.3" +#define DRV_RELDATE "2005-7-29" + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + + +/* Board/System/Debug information/definition ---------------- */ +#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/ +#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/ + +#define ULI526X_IO_SIZE 0x100 +#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */ +#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */ +#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ +#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ +#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) +#define TX_BUF_ALLOC 0x600 +#define RX_ALLOC_SIZE 0x620 +#define ULI526X_RESET 1 +#define CR0_DEFAULT 0 +#define CR6_DEFAULT 0x00080000 /* HD */ +#define CR6_DEFAULT_A 0x22240000 +#define CR7_DEFAULT 0x180c1 +#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ +#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ +#define MAX_PACKET_SIZE 1514 +#define ULI5261_MAX_MULTICAST 14 +#define RX_COPY_SIZE 100 +#define MAX_CHECK_PACKET 0x8000 + +#define ULI526X_10MHF 0 +#define ULI526X_100MHF 1 +#define ULI526X_10MFD 4 +#define ULI526X_100MFD 5 +#define ULI526X_AUTO 8 + +#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */ +#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */ +#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */ +#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */ +#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */ +#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */ + +#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ +#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */ +#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */ + +#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value)) + +#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half"); + + +/* CR9 definition: SROM/MII */ +#define CR9_SROM_READ 0x4800 +#define CR9_SRCS 0x1 +#define CR9_SRCLK 0x2 +#define CR9_CRDOUT 0x8 +#define SROM_DATA_0 0x0 +#define SROM_DATA_1 0x4 +#define PHY_DATA_1 0x20000 +#define PHY_DATA_0 0x00000 +#define MDCLKH 0x10000 + +#define PHY_POWER_DOWN 0x800 + +#define SROM_V41_CODE 0x14 + +#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5); + +/* Sten Check */ +#define DEVICE net_device + +/* Structure/enum declaration ------------------------------- */ +struct tx_desc { + u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ + char *tx_buf_ptr; /* Data for us */ + struct tx_desc *next_tx_desc; +} __attribute__(( aligned(32) )); + +struct rx_desc { + u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ + struct sk_buff *rx_skb_ptr; /* Data for us */ + struct rx_desc *next_rx_desc; +} __attribute__(( aligned(32) )); + +struct uli526x_board_info { + u32 chip_id; /* Chip vendor/Device ID */ + struct DEVICE *next_dev; /* next device */ + struct pci_dev *pdev; /* PCI device */ + spinlock_t lock; + + long ioaddr; /* I/O base address */ + u32 cr0_data; + u32 cr5_data; + u32 cr6_data; + u32 cr7_data; + u32 cr15_data; + + /* pointer for memory physical address */ + dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ + dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ + dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ + dma_addr_t first_tx_desc_dma; + dma_addr_t first_rx_desc_dma; + + /* descriptor pointer */ + unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ + unsigned char *buf_pool_start; /* Tx buffer pool align dword */ + unsigned char *desc_pool_ptr; /* descriptor pool memory */ + struct tx_desc *first_tx_desc; + struct tx_desc *tx_insert_ptr; + struct tx_desc *tx_remove_ptr; + struct rx_desc *first_rx_desc; + struct rx_desc *rx_insert_ptr; + struct rx_desc *rx_ready_ptr; /* packet come pointer */ + unsigned long tx_packet_cnt; /* transmitted packet count */ + unsigned long rx_avail_cnt; /* available rx descriptor count */ + unsigned long interval_rx_cnt; /* rx packet count a callback time */ + + u16 dbug_cnt; + u16 NIC_capability; /* NIC media capability */ + u16 PHY_reg4; /* Saved Phyxcer register 4 value */ + + u8 media_mode; /* user specify media mode */ + u8 op_mode; /* real work media mode */ + u8 phy_addr; + u8 link_failed; /* Ever link failed */ + u8 wait_reset; /* Hardware failed, need to reset */ + struct timer_list timer; + + /* System defined statistic counter */ + struct net_device_stats stats; + + /* Driver defined statistic counter */ + unsigned long tx_fifo_underrun; + unsigned long tx_loss_carrier; + unsigned long tx_no_carrier; + unsigned long tx_late_collision; + unsigned long tx_excessive_collision; + unsigned long tx_jabber_timeout; + unsigned long reset_count; + unsigned long reset_cr8; + unsigned long reset_fatal; + unsigned long reset_TXtimeout; + + /* NIC SROM data */ + unsigned char srom[128]; + u8 init; +}; + +enum uli526x_offsets { + DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, + DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, + DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, + DCR15 = 0x78 +}; + +enum uli526x_CR6_bits { + CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, + CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, + CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 +}; + +/* Global variable declaration ----------------------------- */ +static int __devinitdata printed_version; +static char version[] __devinitdata = + KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static int uli526x_debug; +static unsigned char uli526x_media_mode = ULI526X_AUTO; +static u32 uli526x_cr6_user_set; + +/* For module input parameter */ +static int debug; +static u32 cr6set; +static u32 m526x_id; +static unsigned char mode = 8; + +/* function declaration ------------------------------------- */ +static int uli526x_open(struct DEVICE *); +static int uli526x_start_xmit(struct sk_buff *, struct DEVICE *); +static int uli526x_stop(struct DEVICE *); +static struct net_device_stats * uli526x_get_stats(struct DEVICE *); +static void uli526x_set_filter_mode(struct DEVICE *); +static struct ethtool_ops netdev_ethtool_ops; +static u16 read_srom_word(long ,int); +static irqreturn_t uli526x_interrupt(int , void *, struct pt_regs *); +static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); +static void allocate_rx_buffer(struct uli526x_board_info *); +static void update_cr6(u32, unsigned long); +static void send_filter_frame(struct DEVICE * ,int); +static u16 phy_read(unsigned long, u8, u8, u32); +static u16 phy_readby_cr10(unsigned long, u8, u8); +static void phy_write(unsigned long, u8, u8, u16, u32); +static void phy_writeby_cr10(unsigned long, u8, u8, u16); +static void phy_write_1bit(unsigned long, u32, u32); +static u16 phy_read_1bit(unsigned long, u32); +static u8 uli526x_sense_speed(struct uli526x_board_info *); +static void uli526x_process_mode(struct uli526x_board_info *); +static void uli526x_timer(unsigned long); +static void uli526x_rx_packet(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); +static void uli526x_dynamic_reset(struct DEVICE *); +static void uli526x_free_rxbuffer(struct uli526x_board_info *); +static void uli526x_init(struct DEVICE *); +static void uli526x_set_phyxcer(struct uli526x_board_info *); + +/* ULI526X network baord routine ---------------------------- */ + +/* + * Search ULI526X board ,allocate space and register it + */ + +static int __devinit uli526x_init_one (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uli526x_board_info *db; /* board information structure */ + struct net_device *dev; + int i, err; + u32 configval; + + ULI526X_DBUG(0, "uli526x_init_one()", 0); + + if (!printed_version++) + printk(version); + + /* Init network device */ + dev = alloc_etherdev(sizeof(*db)); + if (dev == NULL) + return -ENOMEM; + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_set_dma_mask(pdev, 0xffffffff)) { + printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); + err = -ENODEV; + goto err_out_free; + } + + /* Enable Master/IO access, Disable memory access */ + err = pci_enable_device(pdev); + if (err) + goto err_out_free; + + if (!pci_resource_start(pdev, 0)) { + printk(KERN_ERR DRV_NAME ": I/O base is zero\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) { + printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n"); + err = -ENODEV; + goto err_out_disable; + } + + if (pci_request_regions(pdev, DRV_NAME)) { + printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); + err = -ENODEV; + goto err_out_disable; + } + + //add by clearzhang 2004/7/8 + pci_read_config_dword(pdev,0x0,&configval); + m526x_id = configval; + if(configval == 0x526310b9) + { + //printk("is m5263\n"); + pci_read_config_dword(pdev,0x0c,&configval); + configval = ((configval & 0xffff00ff) | 0x8000); + pci_write_config_dword(pdev,0x0c,configval); + } + /* Init system & device */ + db = netdev_priv(dev); + + /* Allocate Tx/Rx descriptor memory */ + db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); + + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; + db->first_tx_desc_dma = db->desc_pool_dma_ptr; + db->buf_pool_start = db->buf_pool_ptr; + db->buf_pool_dma_start = db->buf_pool_dma_ptr; + + db->chip_id = ent->driver_data; + db->ioaddr = pci_resource_start(pdev, 0); + + db->pdev = pdev; + db->init = 1; + + dev->base_addr = db->ioaddr; + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + + /* Register some necessary functions */ + dev->open = &uli526x_open; + dev->hard_start_xmit = &uli526x_start_xmit; + dev->stop = &uli526x_stop; + dev->get_stats = &uli526x_get_stats; + dev->set_multicast_list = &uli526x_set_filter_mode; + dev->ethtool_ops = &netdev_ethtool_ops; + spin_lock_init(&db->lock); + + + /* read 64 word srom data */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); + + /* Set Node address */ + if(((u16 *) db->srom)[0] == 0xffff) /* SROM absent, so read MAC address from ID Table */ + { + outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode + outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer + outl(0, db->ioaddr + DCR14); //Clear reset port + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port + //Read MAC address from CR14 + for (i = 0; i < 6; i++) + dev->dev_addr[i] = inl(db->ioaddr + DCR14); + //Read end + outl(0, db->ioaddr + DCR13); //Clear CR13 + outl(0, db->ioaddr + DCR0); //Clear CR0 + udelay(10); + } + else /*Exist SROM*/ + { + for (i = 0; i < 6; i++) + dev->dev_addr[i] = db->srom[20 + i]; + } + err = register_netdev (dev); + if (err) + goto err_out_res; + + printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev)); + + for (i = 0; i < 6; i++) + printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]); + printk(", irq %d.\n", dev->irq); + + pci_set_master(pdev); + + return 0; + +err_out_res: + pci_release_regions(pdev); +err_out_disable: + pci_disable_device(pdev); +err_out_free: + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + return err; +} + + +static void __devexit uli526x_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_remove_one()", 0); + + if (dev) { + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + } + + ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); +} + + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ + +static int uli526x_open(struct DEVICE *dev) +{ + int ret; + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_open", 0); + + ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); + if (ret) + return ret; + + /* system variable init */ + db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; + if(m526x_id == 0x526310b9) + { + //printk("is 5263\n"); + db->cr6_data = CR6_DEFAULT_A | uli526x_cr6_user_set; + } + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + netif_carrier_off(dev); + db->wait_reset = 0; + + db->NIC_capability = 0xf; /* All capability*/ + db->PHY_reg4 = 0x1e0; + + /* CR6 operation mode decision */ + db->cr6_data |= ULI526X_TXTH_256; + db->cr0_data = CR0_DEFAULT; + + /* Initilize ULI526X board */ + uli526x_init(dev); + + /* Active System Interface */ + netif_wake_queue(dev); + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = ULI526X_TIMER_WUT + HZ * 2; + db->timer.data = (unsigned long)dev; + db->timer.function = &uli526x_timer; + add_timer(&db->timer); + + return 0; +} + + +/* Initilize ULI526X board + * Reset ULI526X board + * Initilize TX/Rx descriptor chain structure + * Send the set-up frame + * Enable Tx/Rx machine + */ + +static void uli526x_init(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = db->ioaddr; + u8 phy_tmp; + u16 phy_value; + u16 phy_reg_reset; + + ULI526X_DBUG(0, "uli526x_init()", 0); + + /* Reset M526x MAC controller */ + outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */ + udelay(100); + outl(db->cr0_data, ioaddr + DCR0); + udelay(5); + + /* Phy addr : In some boards,M5261/M5263 phy address != 1 */ + db->phy_addr = 1; + for(phy_tmp=0;phy_tmp<32;phy_tmp++) + { + phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add + if(phy_value != 0xffff&&phy_value!=0) + { + db->phy_addr = phy_tmp; + break; + } + } + if(phy_tmp == 32) + printk(KERN_WARNING "Can not find the phy address!!!"); + /* Parser SROM and media mode */ + db->media_mode = uli526x_media_mode; + + //add by clearzhang 2004/7/8 + /* RESET Phyxcer Chip by GPR port bit 7 */ + //outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ + //outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ + + /* Phyxcer capability setting */ + phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); + phy_reg_reset = (phy_reg_reset | 0x8000); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + udelay(500); + + /* Process Phyxcer Media Mode */ + uli526x_set_phyxcer(db); + + /* Media Mode Process */ + if ( !(db->media_mode & ULI526X_AUTO) ) + db->op_mode = db->media_mode; /* Force Mode */ + + /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + uli526x_descriptor_init(db, ioaddr); + + /* Init CR6 to program M526X operation */ + update_cr6(db->cr6_data, ioaddr); + + /* Send setup frame */ + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + + /* Init CR7, interrupt active bit */ + db->cr7_data = CR7_DEFAULT; + outl(db->cr7_data, ioaddr + DCR7); + + /* Init CR15, Tx jabber and Rx watchdog timer */ + outl(db->cr15_data, ioaddr + DCR15); + + /* Enable ULI526X Tx/Rx function */ + db->cr6_data |= CR6_RXSC | CR6_TXSC; + update_cr6(db->cr6_data, ioaddr); +} + + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ + +static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct tx_desc *txptr; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_start_xmit", 0); + + /* Resource flag check */ + netif_stop_queue(dev); + + /* Too large packet check */ + if (skb->len > MAX_PACKET_SIZE) { + printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len); + dev_kfree_skb(skb); + return 0; + } + + spin_lock_irqsave(&db->lock, flags); + + /* No Tx resource check, it never happen nromally */ + if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) { + spin_unlock_irqrestore(&db->lock, flags); + printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt); + return 1; + } + + /* Disable NIC interrupt */ + outl(0, dev->base_addr + DCR7); + + /* transmit this packet */ + txptr = db->tx_insert_ptr; + memcpy(txptr->tx_buf_ptr, skb->data, skb->len); + txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); + + /* Point to next transmit free descriptor */ + db->tx_insert_ptr = txptr->next_tx_desc; + + /* Transmit Packet Process */ + if ( (db->tx_packet_cnt < TX_DESC_CNT) ) { + txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ + db->tx_packet_cnt++; /* Ready to send */ + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + dev->trans_start = jiffies; /* saved time stamp */ + } + + /* Tx resource check */ + if ( db->tx_packet_cnt < TX_FREE_DESC_CNT ) + netif_wake_queue(dev); + + /* Restore CR7 to enable interrupt */ + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, dev->base_addr + DCR7); + + /* free this SKB */ + dev_kfree_skb(skb); + + return 0; +} + + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ + +static int uli526x_stop(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + + ULI526X_DBUG(0, "uli526x_stop", 0); + + /* disable system */ + netif_stop_queue(dev); + + /* deleted timer */ + del_timer_sync(&db->timer); + + /* Reset & stop ULI526X board */ + outl(ULI526X_RESET, ioaddr + DCR0); + udelay(5); + phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + + /* free interrupt */ + free_irq(dev->irq, dev); + + /* free allocated rx buffer */ + uli526x_free_rxbuffer(db); + +#if 0 + /* show statistic counter */ + printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", + db->tx_fifo_underrun, db->tx_excessive_collision, + db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, + db->tx_jabber_timeout, db->reset_count, db->reset_cr8, + db->reset_fatal, db->reset_TXtimeout); +#endif + + return 0; +} + + +/* + * M5261/M5263 insterrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct DEVICE *dev = dev_id; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long ioaddr = dev->base_addr; + unsigned long flags; + + //ULI526X_DBUG(0, "uli526x_interrupt()", 0); + + if (!dev) { + ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); + return IRQ_NONE; + } + + //outl(0, ioaddr + DCR7); + spin_lock_irqsave(&db->lock, flags); + outl(0, ioaddr + DCR7); + + /* Got ULI526X status */ + db->cr5_data = inl(ioaddr + DCR5); + outl(db->cr5_data, ioaddr + DCR5); + if ( !(db->cr5_data & 0x180c1) ) { + spin_unlock_irqrestore(&db->lock, flags); + outl(db->cr7_data, ioaddr + DCR7); + return IRQ_HANDLED; + } + + /* Disable all interrupt in CR7 to solve the interrupt edge problem */ + //outl(0, ioaddr + DCR7); + + /* Check system status */ + if (db->cr5_data & 0x2000) { + /* system bus error happen */ + ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data); + db->reset_fatal++; + db->wait_reset = 1; /* Need to RESET */ + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; + } + + /* Received the coming packet */ + if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) + uli526x_rx_packet(dev, db); + + /* reallocate rx descriptor buffer */ + if (db->rx_avail_cntcr5_data & 0x01) + uli526x_free_tx_pkt(dev, db); + + /* Restore CR7 to enable interrupt mask */ + outl(db->cr7_data, ioaddr + DCR7); + + spin_unlock_irqrestore(&db->lock, flags); + return IRQ_HANDLED; +} + + +/* + * Free TX resource after TX complete + */ + +static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * db) +{ + struct tx_desc *txptr; +// unsigned long ioaddr = dev->base_addr; + u32 tdes0; + + txptr = db->tx_remove_ptr; + while(db->tx_packet_cnt) { + tdes0 = le32_to_cpu(txptr->tdes0); + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + if (tdes0 & 0x80000000) + break; + + /* A packet sent completed */ + db->tx_packet_cnt--; + db->stats.tx_packets++; + + /* Transmit statistic counter */ + if ( tdes0 != 0x7fffffff ) { + /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ + db->stats.collisions += (tdes0 >> 3) & 0xf; + db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; + if (tdes0 & TDES0_ERR_MASK) { + db->stats.tx_errors++; + if (tdes0 & 0x0002) { /* UnderRun */ + db->tx_fifo_underrun++; + if ( !(db->cr6_data & CR6_SFT) ) { + db->cr6_data = db->cr6_data | CR6_SFT; + update_cr6(db->cr6_data, db->ioaddr); + } + } + if (tdes0 & 0x0100) + db->tx_excessive_collision++; + if (tdes0 & 0x0200) + db->tx_late_collision++; + if (tdes0 & 0x0400) + db->tx_no_carrier++; + if (tdes0 & 0x0800) + db->tx_loss_carrier++; + if (tdes0 & 0x4000) + db->tx_jabber_timeout++; + } + } + + txptr = txptr->next_tx_desc; + }/* End of while */ + + /* Update TX remove pointer to next */ + db->tx_remove_ptr = txptr; + + /* Resource available check */ + if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT ) + netif_wake_queue(dev); /* Active upper layer, send again */ +} + + +/* + * Receive the come packet and pass to upper layer + */ + +static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + int rxlen; + u32 rdes0; + + rxptr = db->rx_ready_ptr; + + while(db->rx_avail_cnt) { + rdes0 = le32_to_cpu(rxptr->rdes0); + if (rdes0 & 0x80000000) /* packet owner check */ + { + break; + } + + db->rx_avail_cnt--; + db->interval_rx_cnt++; + + pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); + if ( (rdes0 & 0x300) != 0x300) { + /* A packet without First/Last flag */ + /* reuse this SKB */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + /* A packet with First/Last flag */ + rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; + + /* error summary bit check */ + if (rdes0 & 0x8000) { + /* This is a error packet */ + //printk(DRV_NAME ": rdes0: %lx\n", rdes0); + db->stats.rx_errors++; + if (rdes0 & 1) + db->stats.rx_fifo_errors++; + if (rdes0 & 2) + db->stats.rx_crc_errors++; + if (rdes0 & 0x80) + db->stats.rx_length_errors++; + } + + if ( !(rdes0 & 0x8000) || + ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { + skb = rxptr->rx_skb_ptr; + + /* Good packet, send to upper layer */ + /* Shorst packet used new SKB */ + if ( (rxlen < RX_COPY_SIZE) && + ( (skb = dev_alloc_skb(rxlen + 2) ) + != NULL) ) { + /* size less than COPY_SIZE, allocate a rxlen SKB */ + skb->dev = dev; + skb_reserve(skb, 2); /* 16byte align */ + memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } else { + skb->dev = dev; + skb_put(skb, rxlen); + } + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + db->stats.rx_packets++; + db->stats.rx_bytes += rxlen; + + } else { + /* Reuse SKB buffer when the packet is error */ + ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0); + uli526x_reuse_skb(db, rxptr->rx_skb_ptr); + } + } + + rxptr = rxptr->next_rx_desc; + } + + db->rx_ready_ptr = rxptr; +} + + +/* + * Get statistics from driver. + */ + +static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_get_stats", 0); + return &db->stats; +} + + +/* + * Set ULI526X multicast address + */ + +static void uli526x_set_filter_mode(struct DEVICE * dev) +{ + struct uli526x_board_info *db = dev->priv; + unsigned long flags; + + ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0); + spin_lock_irqsave(&db->lock, flags); + + if (dev->flags & IFF_PROMISC) { + ULI526X_DBUG(0, "Enable PROM Mode", 0); + db->cr6_data |= CR6_PM | CR6_PBF; + update_cr6(db->cr6_data, db->ioaddr); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) { + ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count); + db->cr6_data &= ~(CR6_PM | CR6_PBF); + db->cr6_data |= CR6_PAM; + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + ULI526X_DBUG(0, "Set multicast address", dev->mc_count); + send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */ + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) +{ + //struct e1000_hw *hw = &adapter->hw; + + { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); + + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); + + + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; + + ecmd->transceiver = XCVR_EXTERNAL; + + + } + + + ecmd->speed = 10; + ecmd->duplex = DUPLEX_HALF; + + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + ecmd->speed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + ecmd->duplex = DUPLEX_FULL; + } + if(db->link_failed) + { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if (db->media_mode & ULI526X_AUTO) + { + ecmd->autoneg = AUTONEG_ENABLE; + } + + +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct uli526x_board_info *np = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + if (np->pdev) + strcpy(info->bus_info, pci_name(np->pdev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { + struct uli526x_board_info *np = netdev_priv(dev); + + ULi_ethtool_gset(np, cmd); + + return 0; +} + +static u32 netdev_get_link(struct net_device *dev) { + struct uli526x_board_info *np = netdev_priv(dev); + + if(np->link_failed) + return 0; + else + return 1; +} + +static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + wol->supported = WAKE_PHY | WAKE_MAGIC; + wol->wolopts = 0; +} + +static struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .get_link = netdev_get_link, + .get_wol = uli526x_get_wol, +}; + +/* + * A periodic timer routine + * Dynamic media sense, allocate Rx buffer... + */ + +static void uli526x_timer(unsigned long data) +{ + u32 tmp_cr8; + unsigned char tmp_cr12=0; + struct DEVICE *dev = (struct DEVICE *) data; + struct uli526x_board_info *db = netdev_priv(dev); + unsigned long flags; + u8 TmpSpeed=10; + + //ULI526X_DBUG(0, "uli526x_timer()", 0); + spin_lock_irqsave(&db->lock, flags); + + + /* Dynamic reset ULI526X : system error or transmit time-out */ + tmp_cr8 = inl(db->ioaddr + DCR8); + if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { + db->reset_cr8++; + db->wait_reset = 1; + } + db->interval_rx_cnt = 0; + + /* TX polling kick monitor */ + if ( db->tx_packet_cnt && + time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) { + outl(0x1, dev->base_addr + DCR1); // Tx polling again + + // TX Timeout + if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) { + db->reset_TXtimeout++; + db->wait_reset = 1; + printk( "%s: Tx timeout - resetting\n", + dev->name); + } + } + + if (db->wait_reset) { + ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); + db->reset_count++; + uli526x_dynamic_reset(dev); + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); + return; + } + + /* Link status check, Dynamic media type change */ + if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0) + tmp_cr12 = 3; + + if ( !(tmp_cr12 & 0x3) && !db->link_failed ) { + /* Link Failed */ + ULI526X_DBUG(0, "Link Failed", tmp_cr12); + netif_carrier_off(dev); + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + db->link_failed = 1; + + /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ + /* AUTO don't need */ + if ( !(db->media_mode & 0x8) ) + phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id); + + /* AUTO mode, if INT phyxcer link failed, select EXT device */ + if (db->media_mode & ULI526X_AUTO) { + db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ + update_cr6(db->cr6_data, db->ioaddr); + } + } else + if ((tmp_cr12 & 0x3) && db->link_failed) { + ULI526X_DBUG(0, "Link link OK", tmp_cr12); + db->link_failed = 0; + + /* Auto Sense Speed */ + if ( (db->media_mode & ULI526X_AUTO) && + uli526x_sense_speed(db) ) + db->link_failed = 1; + uli526x_process_mode(db); + + if(db->link_failed==0) + { + if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD) + { + TmpSpeed = 100; + } + if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD) + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed); + } + else + { + printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed); + } + netif_carrier_on(dev); + } + /* SHOW_MEDIA_TYPE(db->op_mode); */ + } + else if(!(tmp_cr12 & 0x3) && db->link_failed) + { + if(db->init==1) + { + printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name); + netif_carrier_off(dev); + } + } + db->init=0; + + /* Timer active again */ + db->timer.expires = ULI526X_TIMER_WUT; + add_timer(&db->timer); + spin_unlock_irqrestore(&db->lock, flags); +} + + +/* + * Dynamic reset the ULI526X board + * Stop ULI526X board + * Free Tx/Rx allocated memory + * Reset ULI526X board + * Re-initilize ULI526X board + */ + +static void uli526x_dynamic_reset(struct DEVICE *dev) +{ + struct uli526x_board_info *db = netdev_priv(dev); + + ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0); + + /* Sopt MAC controller */ + db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ + update_cr6(db->cr6_data, dev->base_addr); + outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ + outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); + + /* Disable upper layer interface */ + netif_stop_queue(dev); + + /* Free Rx Allocate buffer */ + uli526x_free_rxbuffer(db); + + /* system variable init */ + db->tx_packet_cnt = 0; + db->rx_avail_cnt = 0; + db->link_failed = 1; + db->init=1; + db->wait_reset = 0; + + /* Re-initilize ULI526X board */ + uli526x_init(dev); + + /* Restart upper layer interface */ + netif_wake_queue(dev); +} + + +/* + * free all allocated rx buffer + */ + +static void uli526x_free_rxbuffer(struct uli526x_board_info * db) +{ + ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0); + + /* free allocated rx buffer */ + while (db->rx_avail_cnt) { + dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); + db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; + db->rx_avail_cnt--; + } +} + + +/* + * Reuse the SK buffer + */ + +static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb) +{ + struct rx_desc *rxptr = db->rx_insert_ptr; + + if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { + rxptr->rx_skb_ptr = skb; + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + db->rx_avail_cnt++; + db->rx_insert_ptr = rxptr->next_rx_desc; + } else + ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); +} + + +/* + * Initialize transmit/Receive descriptor + * Using Chain structure, and allocate Tx/Rx buffer + */ + +static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr) +{ + struct tx_desc *tmp_tx; + struct rx_desc *tmp_rx; + unsigned char *tmp_buf; + dma_addr_t tmp_tx_dma, tmp_rx_dma; + dma_addr_t tmp_buf_dma; + int i; + + ULI526X_DBUG(0, "uli526x_descriptor_init()", 0); + + /* tx descriptor start pointer */ + db->tx_insert_ptr = db->first_tx_desc; + db->tx_remove_ptr = db->first_tx_desc; + outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ + + /* rx descriptor start pointer */ + db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT; + db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT; + db->rx_insert_ptr = db->first_rx_desc; + db->rx_ready_ptr = db->first_rx_desc; + outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ + + /* Init Transmit chain */ + tmp_buf = db->buf_pool_start; + tmp_buf_dma = db->buf_pool_dma_start; + tmp_tx_dma = db->first_tx_desc_dma; + for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { + tmp_tx->tx_buf_ptr = tmp_buf; + tmp_tx->tdes0 = cpu_to_le32(0); + tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ + tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); + tmp_tx_dma += sizeof(struct tx_desc); + tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); + tmp_tx->next_tx_desc = tmp_tx + 1; + tmp_buf = tmp_buf + TX_BUF_ALLOC; + tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; + } + (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); + tmp_tx->next_tx_desc = db->first_tx_desc; + + /* Init Receive descriptor chain */ + tmp_rx_dma=db->first_rx_desc_dma; + for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { + tmp_rx->rdes0 = cpu_to_le32(0); + tmp_rx->rdes1 = cpu_to_le32(0x01000600); + tmp_rx_dma += sizeof(struct rx_desc); + tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); + tmp_rx->next_rx_desc = tmp_rx + 1; + } + (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); + tmp_rx->next_rx_desc = db->first_rx_desc; + + /* pre-allocate Rx buffer */ + allocate_rx_buffer(db); +} + + +/* + * Update CR6 value + * Firstly stop ULI526X , then written value and start + */ + +static void update_cr6(u32 cr6_data, unsigned long ioaddr) +{ + + outl(cr6_data, ioaddr + DCR6); + udelay(5); +} + + +/* + * Send a setup frame for M5261/M5263 + * This setup frame initilize ULI526X address filter mode + */ + +static void send_filter_frame(struct DEVICE *dev, int mc_cnt) +{ + struct uli526x_board_info *db = netdev_priv(dev); + struct dev_mc_list *mcptr; + struct tx_desc *txptr; + u16 * addrptr; + u32 * suptr; + int i; + + ULI526X_DBUG(0, "send_filter_frame()", 0); + + txptr = db->tx_insert_ptr; + suptr = (u32 *) txptr->tx_buf_ptr; + + /* Node address */ + addrptr = (u16 *) dev->dev_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + + /* broadcast address */ + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + + /* fit the multicast address */ + for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + addrptr = (u16 *) mcptr->dmi_addr; + *suptr++ = addrptr[0]; + *suptr++ = addrptr[1]; + *suptr++ = addrptr[2]; + } + + for (; i<14; i++) { + *suptr++ = 0xffff; + *suptr++ = 0xffff; + *suptr++ = 0xffff; + } + + /* prepare the setup frame */ + db->tx_insert_ptr = txptr->next_tx_desc; + txptr->tdes1 = cpu_to_le32(0x890000c0); + + /* Resource Check and Send the setup packet */ + if (db->tx_packet_cnt < TX_DESC_CNT) { + /* Resource Empty */ + db->tx_packet_cnt++; + txptr->tdes0 = cpu_to_le32(0x80000000); + update_cr6(db->cr6_data | 0x2000, dev->base_addr); + outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ + update_cr6(db->cr6_data, dev->base_addr); + dev->trans_start = jiffies; + } else + printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n"); +} + + +/* + * Allocate rx buffer, + * As possible as allocate maxiumn Rx buffer + */ + +static void allocate_rx_buffer(struct uli526x_board_info *db) +{ + struct rx_desc *rxptr; + struct sk_buff *skb; + + rxptr = db->rx_insert_ptr; + + while(db->rx_avail_cnt < RX_DESC_CNT) { + if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) + break; + rxptr->rx_skb_ptr = skb; /* FIXME (?) */ + rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); + wmb(); + rxptr->rdes0 = cpu_to_le32(0x80000000); + rxptr = rxptr->next_rx_desc; + db->rx_avail_cnt++; + } + + db->rx_insert_ptr = rxptr; +} + + +/* + * Read one word data from the serial ROM + */ + +static u16 read_srom_word(long ioaddr, int offset) +{ + int i; + u16 srom_data = 0; + long cr9_ioaddr = ioaddr + DCR9; + + outl(CR9_SROM_READ, cr9_ioaddr); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + /* Send the Read Command 110b */ + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); + SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); + + /* Send the offset */ + for (i = 5; i >= 0; i--) { + srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; + SROM_CLK_WRITE(srom_data, cr9_ioaddr); + } + + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + + for (i = 16; i > 0; i--) { + outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); + udelay(5); + srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); + outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); + udelay(5); + } + + outl(CR9_SROM_READ, cr9_ioaddr); + return srom_data; +} + + +/* + * Auto sense the media mode + */ + +static u8 uli526x_sense_speed(struct uli526x_board_info * db) +{ + u8 ErrFlag = 0; + u16 phy_mode; + + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); + + if ( (phy_mode & 0x24) == 0x24 ) { + + phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7); + if(phy_mode&0x8000) + phy_mode = 0x8000; + else if(phy_mode&0x4000) + phy_mode = 0x4000; + else if(phy_mode&0x2000) + phy_mode = 0x2000; + else + phy_mode = 0x1000; + + /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ + switch (phy_mode) { + case 0x1000: db->op_mode = ULI526X_10MHF; break; + case 0x2000: db->op_mode = ULI526X_10MFD; break; + case 0x4000: db->op_mode = ULI526X_100MHF; break; + case 0x8000: db->op_mode = ULI526X_100MFD; break; + default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break; + } + } else { + db->op_mode = ULI526X_10MHF; + ULI526X_DBUG(0, "Link Failed :", phy_mode); + ErrFlag = 1; + } + + return ErrFlag; +} + + +/* + * Set 10/100 phyxcer capability + * AUTO mode : phyxcer register4 is NIC capability + * Force mode: phyxcer register4 is the force media + */ + +static void uli526x_set_phyxcer(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Phyxcer capability setting */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + + if (db->media_mode & ULI526X_AUTO) { + /* AUTO Mode */ + phy_reg |= db->PHY_reg4; + } else { + /* Force Mode */ + switch(db->media_mode) { + case ULI526X_10MHF: phy_reg |= 0x20; break; + case ULI526X_10MFD: phy_reg |= 0x40; break; + case ULI526X_100MHF: phy_reg |= 0x80; break; + case ULI526X_100MFD: phy_reg |= 0x100; break; + } + + } + + /* Write new capability to Phyxcer Reg4 */ + if ( !(phy_reg & 0x01e0)) { + phy_reg|=db->PHY_reg4; + db->media_mode|=ULI526X_AUTO; + } + phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + + /* Restart Auto-Negotiation */ + phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + udelay(50); +} + + +/* + * Process op-mode + AUTO mode : PHY controller in Auto-negotiation Mode + * Force mode: PHY controller in force mode with HUB + * N-way force capability with SWITCH + */ + +static void uli526x_process_mode(struct uli526x_board_info *db) +{ + u16 phy_reg; + + /* Full Duplex Mode Check */ + if (db->op_mode & 0x4) + db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ + else + db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ + + update_cr6(db->cr6_data, db->ioaddr); + + /* 10/100M phyxcer force mode need */ + if ( !(db->media_mode & 0x8)) { + /* Forece Mode */ + phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); + if ( !(phy_reg & 0x1) ) { + /* parter without N-Way capability */ + phy_reg = 0x0; + switch(db->op_mode) { + case ULI526X_10MHF: phy_reg = 0x0; break; + case ULI526X_10MFD: phy_reg = 0x100; break; + case ULI526X_100MHF: phy_reg = 0x2000; break; + case ULI526X_100MFD: phy_reg = 0x2100; break; + } + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id); + } + } +} + + +/* + * Write a word to Phy register + */ + +static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) +{ + u16 i; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + { + phy_writeby_cr10(iobase, phy_addr, offset, phy_data); + return; + } + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send write command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* written trasnition */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Write a word data to PHY controller */ + for ( i = 0x8000; i > 0; i >>= 1) + phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + +} + + +/* + * Read a word data from phy register + */ + +static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +{ + int i; + u16 phy_data; + unsigned long ioaddr; + + if(chip_id == PCI_ULI5263_ID) + return phy_readby_cr10(iobase, phy_addr, offset); + /* M5261/M5263 Chip */ + ioaddr = iobase + DCR9; + + /* Send 33 synchronization clock to Phy controller */ + for (i = 0; i < 35; i++) + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send start command(01) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + + /* Send read command(10) to Phy */ + phy_write_1bit(ioaddr, PHY_DATA_1, chip_id); + phy_write_1bit(ioaddr, PHY_DATA_0, chip_id); + + /* Send Phy address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Send register address */ + for (i = 0x10; i > 0; i = i >> 1) + phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id); + + /* Skip transition state */ + phy_read_1bit(ioaddr, chip_id); + + /* read 16bit data */ + for (phy_data = 0, i = 0; i < 16; i++) { + phy_data <<= 1; + phy_data |= phy_read_1bit(ioaddr, chip_id); + } + + return phy_data; +} + +static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x08000000; + outl(cr10_value,ioaddr); + udelay(1); + while(1) + { + cr10_value = inl(ioaddr); + if(cr10_value&0x10000000) + break; + } + return (cr10_value&0x0ffff); +} + +static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data) +{ + unsigned long ioaddr,cr10_value; + + ioaddr = iobase + DCR10; + cr10_value = phy_addr; + cr10_value = (cr10_value<<5) + offset; + cr10_value = (cr10_value<<16) + 0x04000000 + phy_data; + outl(cr10_value,ioaddr); + udelay(1); +} +/* + * Write one bit data to Phy Controller + */ + +static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id) +{ + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); + outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ + udelay(1); + outl(phy_data , ioaddr); /* MII Clock Low */ + udelay(1); +} + + +/* + * Read one bit phy data from PHY controller + */ + +static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id) +{ + u16 phy_data; + + outl(0x50000 , ioaddr); + udelay(1); + phy_data = ( inl(ioaddr) >> 19 ) & 0x1; + outl(0x40000 , ioaddr); + udelay(1); + + return phy_data; +} + + +static struct pci_device_id uli526x_pci_tbl[] = { + { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID }, + { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl); + + +static struct pci_driver uli526x_driver = { + .name = "uli526x", + .id_table = uli526x_pci_tbl, + .probe = uli526x_init_one, + .remove = __devexit_p(uli526x_remove_one), +}; + +MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw"); +MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM(debug, "i"); +MODULE_PARM(mode, "i"); +MODULE_PARM(cr6set, "i"); +MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)"); +MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); + +/* Description: + * when user used insmod to add module, system invoked init_module() + * to initilize and register. + */ + +static int __init uli526x_init_module(void) +{ + int rc; + + printk(version); + printed_version = 1; + + ULI526X_DBUG(0, "init_module() ", debug); + + if (debug) + uli526x_debug = debug; /* set debug flag */ + if (cr6set) + uli526x_cr6_user_set = cr6set; + + switch(mode) { + case ULI526X_10MHF: + case ULI526X_100MHF: + case ULI526X_10MFD: + case ULI526X_100MFD: + uli526x_media_mode = mode; + break; + default:uli526x_media_mode = ULI526X_AUTO; + break; + } + + rc = pci_module_init(&uli526x_driver); + if (rc < 0) + return rc; + + return 0; +} + + +/* + * Description: + * when user used rmmod to delete module, system invoked clean_module() + * to un-register all registered services. + */ + +static void __exit uli526x_cleanup_module(void) +{ + ULI526X_DBUG(0, "uli526x_clean_module() ", debug); + pci_unregister_driver(&uli526x_driver); +} + +module_init(uli526x_init_module); +module_exit(uli526x_cleanup_module); -- cgit v1.2.3-70-g09d2 From 890e8d0a3ded0b1dee9020bbef7e9908e2228ffb Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:08:43 +0200 Subject: [PATCH] sis190: resurrection Raise the sis190 driver from the dead The driver handles the integrated network device found on SiS 965L chipset. It follows the classical (non-napi) interrupt-driven model and provides minimal ethtool support. The code comes from a heavy cleanup/rewrite of the original code which was removed from the kernel on 14/04/2004. Since the r8169 driver does not work too bad and there will probably be (at least) a few months of improvements/testing/fixing, I made the code as close as possible to the r8169 one. Pascal Chapperon deserves some special credit for testing and bug-catching. Many thanks to Lars Vahlenberg as well. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 10 + drivers/net/Makefile | 1 + drivers/net/sis190.c | 1359 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1370 insertions(+) create mode 100644 drivers/net/sis190.c (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a835eb5880..765fbb29d38 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1921,6 +1921,16 @@ config R8169_VLAN If in doubt, say Y. +config SIS190 + tristate "SiS190 gigabit ethernet support" + depends on PCI + select CRC32 + ---help--- + Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. + config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 63c6d1e6d4d..67b280af425 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_E100) += e100.o obj-$(CONFIG_TLAN) += tlan.o obj-$(CONFIG_EPIC100) += epic100.o +obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ACENIC) += acenic.o diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c new file mode 100644 index 00000000000..fd303e7408a --- /dev/null +++ b/drivers/net/sis190.c @@ -0,0 +1,1359 @@ +/* + sis190.c: Silicon Integrated Systems SiS190 ethernet driver + + Copyright (c) 2003 K.M. Liu + Copyright (c) 2003, 2004 Jeff Garzik + Copyright (c) 2003, 2004, 2005 Francois Romieu + + Based on r8169.c, tg3.c, 8139cp.c, skge.c and probably even epic100.c. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + See the file COPYING in this distribution for more information. + + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define net_drv(p, arg...) if (netif_msg_drv(p)) \ + printk(arg) +#define net_probe(p, arg...) if (netif_msg_probe(p)) \ + printk(arg) +#define net_link(p, arg...) if (netif_msg_link(p)) \ + printk(arg) +#define net_intr(p, arg...) if (netif_msg_intr(p)) \ + printk(arg) +#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ + printk(arg) + +#ifdef CONFIG_SIS190_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define DRV_VERSION "1.2" NAPI_SUFFIX +#define DRV_NAME "sis190" +#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION +#define PFX DRV_NAME ": " + +#ifdef CONFIG_SIS190_NAPI +#define sis190_rx_skb netif_receive_skb +#define sis190_rx_quota(count, quota) min(count, quota) +#else +#define sis190_rx_skb netif_rx +#define sis190_rx_quota(count, quota) count +#endif + +#define MAC_ADDR_LEN 6 + +#define NUM_TX_DESC 64 +#define NUM_RX_DESC 64 +#define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) +#define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) +#define RX_BUF_SIZE 1536 + +#define SIS190_REGS_SIZE 0x80 +#define SIS190_TX_TIMEOUT (6*HZ) +#define SIS190_PHY_TIMEOUT (10*HZ) +#define SIS190_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + +/* Enhanced PHY access register bit definitions */ +#define EhnMIIread 0x0000 +#define EhnMIIwrite 0x0020 +#define EhnMIIdataShift 16 +#define EhnMIIpmdShift 6 /* 7016 only */ +#define EhnMIIregShift 11 +#define EhnMIIreq 0x0010 +#define EhnMIInotDone 0x0010 + +/* Write/read MMIO register */ +#define SIS_W8(reg, val) writeb ((val), ioaddr + (reg)) +#define SIS_W16(reg, val) writew ((val), ioaddr + (reg)) +#define SIS_W32(reg, val) writel ((val), ioaddr + (reg)) +#define SIS_R8(reg) readb (ioaddr + (reg)) +#define SIS_R16(reg) readw (ioaddr + (reg)) +#define SIS_R32(reg) readl (ioaddr + (reg)) + +#define SIS_PCI_COMMIT() SIS_R32(IntrControl) + +enum sis190_registers { + TxControl = 0x00, + TxDescStartAddr = 0x04, + TxNextDescAddr = 0x0c, // unused + RxControl = 0x10, + RxDescStartAddr = 0x14, + RxNextDescAddr = 0x1c, // unused + IntrStatus = 0x20, + IntrMask = 0x24, + IntrControl = 0x28, + IntrTimer = 0x2c, // unused + PMControl = 0x30, // unused + ROMControl = 0x38, + ROMInterface = 0x3c, + StationControl = 0x40, + GMIIControl = 0x44, + TxMacControl = 0x50, + RxMacControl = 0x60, + RxMacAddr = 0x62, + RxHashTable = 0x68, + // Undocumented = 0x6c, + RxWakeOnLan = 0x70, + // Undocumented = 0x74, + RxMPSControl = 0x78, // unused +}; + +enum sis190_register_content { + /* IntrStatus */ + SoftInt = 0x40000000, // unused + Timeup = 0x20000000, // unused + PauseFrame = 0x00080000, // unused + MagicPacket = 0x00040000, // unused + WakeupFrame = 0x00020000, // unused + LinkChange = 0x00010000, + RxQEmpty = 0x00000080, + RxQInt = 0x00000040, + TxQ1Empty = 0x00000020, // unused + TxQ1Int = 0x00000010, + TxQ0Empty = 0x00000008, // unused + TxQ0Int = 0x00000004, + RxHalt = 0x00000002, + TxHalt = 0x00000001, + + /* RxStatusDesc */ + RxRES = 0x00200000, // unused + RxCRC = 0x00080000, + RxRUNT = 0x00100000, // unused + RxRWT = 0x00400000, // unused + + /* {Rx/Tx}CmdBits */ + CmdReset = 0x10, + CmdRxEnb = 0x08, // unused + CmdTxEnb = 0x01, + RxBufEmpty = 0x01, // unused + + /* Cfg9346Bits */ + Cfg9346_Lock = 0x00, // unused + Cfg9346_Unlock = 0xc0, // unused + + /* RxMacControl */ + AcceptErr = 0x20, // unused + AcceptRunt = 0x10, // unused + AcceptBroadcast = 0x0800, + AcceptMulticast = 0x0400, + AcceptMyPhys = 0x0200, + AcceptAllPhys = 0x0100, + + /* RxConfigBits */ + RxCfgFIFOShift = 13, + RxCfgDMAShift = 8, // 0x1a in RxControl ? + + /* TxConfigBits */ + TxInterFrameGapShift = 24, + TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ + + /* StationControl */ + _1000bpsF = 0x1c00, + _1000bpsH = 0x0c00, + _100bpsF = 0x1800, + _100bpsH = 0x0800, + _10bpsF = 0x1400, + _10bpsH = 0x0400, + + LinkStatus = 0x02, // unused + FullDup = 0x01, // unused + + /* TBICSRBit */ + TBILinkOK = 0x02000000, // unused +}; + +struct TxDesc { + u32 PSize; + u32 status; + u32 addr; + u32 size; +}; + +struct RxDesc { + u32 PSize; + u32 status; + u32 addr; + u32 size; +}; + +enum _DescStatusBit { + /* _Desc.status */ + OWNbit = 0x80000000, + INTbit = 0x40000000, + DEFbit = 0x00200000, + CRCbit = 0x00020000, + PADbit = 0x00010000, + /* _Desc.size */ + RingEnd = (1 << 31), + /* _Desc.PSize */ + RxSizeMask = 0x0000ffff +}; + +struct sis190_private { + void __iomem *mmio_addr; + struct pci_dev *pci_dev; + struct net_device_stats stats; + spinlock_t lock; + u32 rx_buf_sz; + u32 cur_rx; + u32 cur_tx; + u32 dirty_rx; + u32 dirty_tx; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + struct RxDesc *RxDescRing; + struct TxDesc *TxDescRing; + struct sk_buff *Rx_skbuff[NUM_RX_DESC]; + struct sk_buff *Tx_skbuff[NUM_TX_DESC]; + struct work_struct phy_task; + struct timer_list timer; + u32 msg_enable; +}; + +const static struct { + const char *name; + u8 version; /* depend on docs */ + u32 RxConfigMask; /* clear the bits supported by this chip */ +} sis_chip_info[] = { + { DRV_NAME, 0x00, 0xff7e1880, }, +}; + +static struct pci_device_id sis190_pci_tbl[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, sis190_pci_tbl); + +static int rx_copybreak = 200; + +static struct { + u32 msg_enable; +} debug = { -1 }; + +MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver"); +module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); +MODULE_AUTHOR("K.M. Liu , Ueimor "); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + +static const u32 sis190_intr_mask = + RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt; + +/* + * Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + * The chips use a 64 element hash table based on the Ethernet CRC. + */ +static int multicast_filter_limit = 32; + +static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) +{ + unsigned int i; + + SIS_W32(GMIIControl, ctl); + + msleep(1); + + for (i = 0; i < 100; i++) { + if (!(SIS_R32(GMIIControl) & EhnMIInotDone)) + break; + msleep(1); + } + + if (i > 999) + printk(KERN_ERR PFX "PHY command failed !\n"); +} + +static void mdio_write(void __iomem *ioaddr, int reg, int val) +{ + u32 pmd = 1; + + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | + (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift) | + (((u32) val) << EhnMIIdataShift)); +} + +static int mdio_read(void __iomem *ioaddr, int reg) +{ + u32 pmd = 1; + + __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | + (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift)); + + return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); +} + +static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +{ + unsigned int i; + u16 data; + u32 val; + + if (!(SIS_R32(ROMControl) & 0x0002)) + return 0; + + val = (0x0080 | (0x2 << 8) | (reg << 10)); + + SIS_W32(ROMInterface, val); + + for (i = 0; i < 200; i++) { + if (!(SIS_R32(ROMInterface) & 0x0080)) + break; + msleep(1); + } + + data = (u16) ((SIS_R32(ROMInterface) & 0xffff0000) >> 16); + + return data; +} + +static void sis190_irq_mask_and_ack(void __iomem *ioaddr) +{ + SIS_W32(IntrMask, 0x00); + SIS_W32(IntrStatus, 0xffffffff); + SIS_PCI_COMMIT(); +} + +static void sis190_asic_down(void __iomem *ioaddr) +{ + /* Stop the chip's Tx and Rx DMA processes. */ + + SIS_W32(TxControl, 0x1a00); + SIS_W32(RxControl, 0x1a00); + + sis190_irq_mask_and_ack(ioaddr); +} + +static void sis190_mark_as_last_descriptor(struct RxDesc *desc) +{ + desc->size |= cpu_to_le32(RingEnd); +} + +static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) +{ + u32 eor = le32_to_cpu(desc->size) & RingEnd; + + desc->PSize = 0x0; + desc->size = cpu_to_le32(rx_buf_sz | eor); + wmb(); + desc->status = cpu_to_le32(OWNbit | INTbit); +} + +static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, + u32 rx_buf_sz) +{ + desc->addr = cpu_to_le32(mapping); + sis190_give_to_asic(desc, rx_buf_sz); +} + +static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) +{ + desc->PSize = 0x0; + desc->addr = 0xdeadbeef; + desc->size &= cpu_to_le32(RingEnd); + wmb(); + desc->status = 0x0; +} + +static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff, + struct RxDesc *desc, u32 rx_buf_sz) +{ + struct sk_buff *skb; + dma_addr_t mapping; + int ret = 0; + + skb = dev_alloc_skb(rx_buf_sz); + if (!skb) + goto err_out; + + *sk_buff = skb; + + mapping = pci_map_single(pdev, skb->data, rx_buf_sz, + PCI_DMA_FROMDEVICE); + + sis190_map_to_asic(desc, mapping, rx_buf_sz); +out: + return ret; + +err_out: + ret = -ENOMEM; + sis190_make_unusable_by_asic(desc); + goto out; +} + +static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev, + u32 start, u32 end) +{ + u32 cur; + + for (cur = start; cur < end; cur++) { + int ret, i = cur % NUM_RX_DESC; + + if (tp->Rx_skbuff[i]) + continue; + + ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i, + tp->RxDescRing + i, tp->rx_buf_sz); + if (ret < 0) + break; + } + return cur - start; +} + +static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, + struct RxDesc *desc, int rx_buf_sz) +{ + int ret = -1; + + if (pkt_size < rx_copybreak) { + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN); + if (skb) { + skb_reserve(skb, NET_IP_ALIGN); + eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0); + *sk_buff = skb; + sis190_give_to_asic(desc, rx_buf_sz); + ret = 0; + } + } + return ret; +} + +static int sis190_rx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + struct net_device_stats *stats = &tp->stats; + u32 rx_left, cur_rx = tp->cur_rx; + u32 delta, count; + + rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; + rx_left = sis190_rx_quota(rx_left, (u32) dev->quota); + + for (; rx_left > 0; rx_left--, cur_rx++) { + unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescRing + entry; + u32 status; + + if (desc->status & OWNbit) + break; + + status = le32_to_cpu(desc->PSize); + + // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, + // status); + + if (status & RxCRC) { + net_intr(tp, KERN_INFO "%s: bad crc. status = %08x.\n", + dev->name, status); + stats->rx_errors++; + stats->rx_crc_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + } else if (!(status & PADbit)) { + net_intr(tp, KERN_INFO "%s: bad pad. status = %08x.\n", + dev->name, status); + stats->rx_errors++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + } else { + struct sk_buff *skb = tp->Rx_skbuff[entry]; + int pkt_size = (status & RxSizeMask) - 4; + void (*pci_action)(struct pci_dev *, dma_addr_t, + size_t, int) = pci_dma_sync_single_for_device; + + if (unlikely(pkt_size > tp->rx_buf_sz)) { + net_intr(tp, KERN_INFO + "%s: (frag) status = %08x.\n", + dev->name, status); + stats->rx_dropped++; + stats->rx_length_errors++; + sis190_give_to_asic(desc, tp->rx_buf_sz); + continue; + } + + pci_dma_sync_single_for_cpu(tp->pci_dev, + le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + if (sis190_try_rx_copy(&skb, pkt_size, desc, + tp->rx_buf_sz)) { + pci_action = pci_unmap_single; + tp->Rx_skbuff[entry] = NULL; + sis190_make_unusable_by_asic(desc); + } + + pci_action(tp->pci_dev, le32_to_cpu(desc->addr), + tp->rx_buf_sz, PCI_DMA_FROMDEVICE); + + skb->dev = dev; + skb_put(skb, pkt_size); + skb->protocol = eth_type_trans(skb, dev); + + sis190_rx_skb(skb); + + dev->last_rx = jiffies; + stats->rx_bytes += pkt_size; + stats->rx_packets++; + } + } + count = cur_rx - tp->cur_rx; + tp->cur_rx = cur_rx; + + delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); + if (!delta && count && netif_msg_intr(tp)) + printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name); + tp->dirty_rx += delta; + + if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp)) + printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name); + + return count; +} + +static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb, + struct TxDesc *desc) +{ + unsigned int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); + + memset(desc, 0x00, sizeof(*desc)); +} + +static void sis190_tx_interrupt(struct net_device *dev, + struct sis190_private *tp, void __iomem *ioaddr) +{ + u32 pending, dirty_tx = tp->dirty_tx; + /* + * It would not be needed if queueing was allowed to be enabled + * again too early (hint: think preempt and unclocked smp systems). + */ + unsigned int queue_stopped; + + smp_rmb(); + pending = tp->cur_tx - dirty_tx; + queue_stopped = (pending == NUM_TX_DESC); + + for (; pending; pending--, dirty_tx++) { + unsigned int entry = dirty_tx % NUM_TX_DESC; + struct TxDesc *txd = tp->TxDescRing + entry; + struct sk_buff *skb; + + if (le32_to_cpu(txd->status) & OWNbit) + break; + + skb = tp->Tx_skbuff[entry]; + + tp->stats.tx_packets++; + tp->stats.tx_bytes += skb->len; + + sis190_unmap_tx_skb(tp->pci_dev, skb, txd); + tp->Tx_skbuff[entry] = NULL; + dev_kfree_skb_irq(skb); + } + + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + smp_wmb(); + if (queue_stopped) + netif_wake_queue(dev); + } +} + +/* + * The interrupt handler does all of the Rx thread work and cleans up after + * the Tx thread. + */ +static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs) +{ + struct net_device *dev = __dev; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int handled = 0; + u32 status; + + status = SIS_R32(IntrStatus); + + if ((status == 0xffffffff) || !status) + goto out; + + handled = 1; + + if (unlikely(!netif_running(dev))) { + sis190_asic_down(ioaddr); + goto out; + } + + SIS_W32(IntrStatus, status); + + // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status); + + if (status & LinkChange) { + net_intr(tp, KERN_INFO "%s: link change.\n", dev->name); + schedule_work(&tp->phy_task); + } + + if (status & RxQInt) + sis190_rx_interrupt(dev, tp, ioaddr); + + if (status & TxQ0Int) + sis190_tx_interrupt(dev, tp, ioaddr); +out: + return IRQ_RETVAL(handled); +} + +static void sis190_free_rx_skb(struct sis190_private *tp, + struct sk_buff **sk_buff, struct RxDesc *desc) +{ + struct pci_dev *pdev = tp->pci_dev; + + pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(*sk_buff); + *sk_buff = NULL; + sis190_make_unusable_by_asic(desc); +} + +static void sis190_rx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + if (!tp->Rx_skbuff[i]) + continue; + sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i); + } +} + +static void sis190_init_ring_indexes(struct sis190_private *tp) +{ + tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; +} + +static int sis190_init_ring(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_init_ring_indexes(tp); + + memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *)); + memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); + + if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) + goto err_rx_clear; + + sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1); + + return 0; + +err_rx_clear: + sis190_rx_clear(tp); + return -ENOMEM; +} + +static void sis190_set_rx_mode(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + u32 mc_filter[2]; /* Multicast hash filter */ + u16 rx_mode; + + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((dev->mc_count > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct dev_mc_list *mclist; + unsigned int i; + + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + int bit_nr = + ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + spin_lock_irqsave(&tp->lock, flags); + + SIS_W16(RxMacControl, rx_mode | 0x2); + SIS_W32(RxHashTable, mc_filter[0]); + SIS_W32(RxHashTable + 4, mc_filter[1]); + + spin_unlock_irqrestore(&tp->lock, flags); +} + +static void sis190_soft_reset(void __iomem *ioaddr) +{ + SIS_W32(IntrControl, 0x8000); + SIS_PCI_COMMIT(); + msleep(1); + SIS_W32(IntrControl, 0x0); + sis190_asic_down(ioaddr); + msleep(1); +} + +static void sis190_hw_start(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + sis190_soft_reset(ioaddr); + + SIS_W32(TxDescStartAddr, tp->tx_dma); + SIS_W32(RxDescStartAddr, tp->rx_dma); + + SIS_W32(IntrStatus, 0xffffffff); + SIS_W32(IntrMask, 0x0); + /* + * Default is 100Mbps. + * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09 + */ + SIS_W16(StationControl, 0x1901); + SIS_W32(GMIIControl, 0x0); + SIS_W32(TxMacControl, 0x60); + SIS_W16(RxMacControl, 0x02); + SIS_W32(RxHashTable, 0x0); + SIS_W32(0x6c, 0x0); + SIS_W32(RxWakeOnLan, 0x0); + SIS_W32(0x74, 0x0); + + SIS_PCI_COMMIT(); + + sis190_set_rx_mode(dev); + + /* Enable all known interrupts by setting the interrupt mask. */ + SIS_W32(IntrMask, sis190_intr_mask); + + SIS_W32(TxControl, 0x1a00 | CmdTxEnb); + SIS_W32(RxControl, 0x1a1d); + + netif_start_queue(dev); +} + +static void sis190_phy_task(void * data) +{ + struct net_device *dev = data; + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 val; + + val = mdio_read(ioaddr, MII_BMCR); + if (val & BMCR_RESET) { + // FIXME: needlessly high ? -- FR 02/07/2005 + mod_timer(&tp->timer, jiffies + HZ/10); + } else if (!(mdio_read(ioaddr, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", + dev->name); + mdio_write(ioaddr, MII_BMCR, val | BMCR_RESET); + mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); + } else { + /* Rejoice ! */ + struct { + int val; + const char *msg; + u16 ctl; + } reg31[] = { + { LPA_1000XFULL | LPA_SLCT, + "1000 Mbps Full Duplex", + 0x01 | _1000bpsF }, + { LPA_1000XHALF | LPA_SLCT, + "1000 Mbps Half Duplex", + 0x01 | _1000bpsH }, + { LPA_100FULL, + "100 Mbps Full Duplex", + 0x01 | _100bpsF }, + { LPA_100HALF, + "100 Mbps Half Duplex", + 0x01 | _100bpsH }, + { LPA_10FULL, + "10 Mbps Full Duplex", + 0x01 | _10bpsF }, + { LPA_10HALF, + "10 Mbps Half Duplex", + 0x01 | _10bpsH }, + { 0, "unknown", 0x0000 } + }, *p; + + val = mdio_read(ioaddr, 0x1f); + net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); + + val = mdio_read(ioaddr, MII_LPA); + net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); + + for (p = reg31; p->ctl; p++) { + if ((val & p->val) == p->val) + break; + } + if (p->ctl) + SIS_W16(StationControl, p->ctl); + net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name, + p->msg); + netif_carrier_on(dev); + } +} + +static void sis190_phy_timer(unsigned long __opaque) +{ + struct net_device *dev = (struct net_device *)__opaque; + struct sis190_private *tp = netdev_priv(dev); + + if (likely(netif_running(dev))) + schedule_work(&tp->phy_task); +} + +static inline void sis190_delete_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + del_timer_sync(&tp->timer); +} + +static inline void sis190_request_timer(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct timer_list *timer = &tp->timer; + + init_timer(timer); + timer->expires = jiffies + SIS190_PHY_TIMEOUT; + timer->data = (unsigned long)dev; + timer->function = sis190_phy_timer; + add_timer(timer); +} + +static void sis190_set_rxbufsize(struct sis190_private *tp, + struct net_device *dev) +{ + unsigned int mtu = dev->mtu; + + tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; +} + +static int sis190_open(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + int rc = -ENOMEM; + + sis190_set_rxbufsize(tp, dev); + + /* + * Rx and Tx descriptors need 256 bytes alignment. + * pci_alloc_consistent() guarantees a stronger alignment. + */ + tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma); + if (!tp->TxDescRing) + goto out; + + tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma); + if (!tp->RxDescRing) + goto err_free_tx_0; + + rc = sis190_init_ring(dev); + if (rc < 0) + goto err_free_rx_1; + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + sis190_request_timer(dev); + + rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev); + if (rc < 0) + goto err_release_timer_2; + + sis190_hw_start(dev); +out: + return rc; + +err_release_timer_2: + sis190_delete_timer(dev); + sis190_rx_clear(tp); +err_free_rx_1: + pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing, + tp->rx_dma); +err_free_tx_0: + pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing, + tp->tx_dma); + goto out; +} + +static void sis190_tx_clear(struct sis190_private *tp) +{ + unsigned int i; + + for (i = 0; i < NUM_TX_DESC; i++) { + struct sk_buff *skb = tp->Tx_skbuff[i]; + + if (!skb) + continue; + + sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i); + tp->Tx_skbuff[i] = NULL; + dev_kfree_skb(skb); + + tp->stats.tx_dropped++; + } + tp->cur_tx = tp->dirty_tx = 0; +} + +static void sis190_down(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int poll_locked = 0; + + sis190_delete_timer(dev); + + netif_stop_queue(dev); + + flush_scheduled_work(); + + do { + spin_lock_irq(&tp->lock); + + sis190_asic_down(ioaddr); + + spin_unlock_irq(&tp->lock); + + synchronize_irq(dev->irq); + + if (!poll_locked) { + netif_poll_disable(dev); + poll_locked++; + } + + synchronize_sched(); + + } while (SIS_R32(IntrMask)); + + sis190_tx_clear(tp); + sis190_rx_clear(tp); +} + +static int sis190_close(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + sis190_down(dev); + + free_irq(dev->irq, dev); + + netif_poll_enable(dev); + + pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma); + pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma); + + tp->TxDescRing = NULL; + tp->RxDescRing = NULL; + + return 0; +} + +static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 len, entry, dirty_tx; + struct TxDesc *desc; + dma_addr_t mapping; + + if (unlikely(skb->len < ETH_ZLEN)) { + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) { + tp->stats.tx_dropped++; + goto out; + } + len = ETH_ZLEN; + } else { + len = skb->len; + } + + entry = tp->cur_tx % NUM_TX_DESC; + desc = tp->TxDescRing + entry; + + if (unlikely(le32_to_cpu(desc->status) & OWNbit)) { + netif_stop_queue(dev); + net_tx_err(tp, KERN_ERR PFX + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); + + tp->Tx_skbuff[entry] = skb; + + desc->PSize = cpu_to_le32(len); + desc->addr = cpu_to_le32(mapping); + + desc->size = cpu_to_le32(len); + if (entry == (NUM_TX_DESC - 1)) + desc->size |= cpu_to_le32(RingEnd); + + wmb(); + + desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit); + + tp->cur_tx++; + + smp_wmb(); + + SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb); + + dev->trans_start = jiffies; + + dirty_tx = tp->dirty_tx; + if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) { + netif_stop_queue(dev); + smp_rmb(); + if (dirty_tx != tp->dirty_tx) + netif_wake_queue(dev); + } +out: + return NETDEV_TX_OK; +} + +static struct net_device_stats *sis190_get_stats(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return &tp->stats; +} + +static void sis190_release_board(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct sis190_private *tp = netdev_priv(dev); + + iounmap(tp->mmio_addr); + pci_release_regions(pdev); + pci_disable_device(pdev); + free_netdev(dev); +} + +static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) +{ + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int rc; + + dev = alloc_etherdev(sizeof(*tp)); + if (!dev) { + net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n"); + rc = -ENOMEM; + goto err_out_0; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT); + + rc = pci_enable_device(pdev); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev)); + goto err_free_dev_1; + } + + rc = -ENODEV; + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) { + net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc < 0) { + net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + goto err_pci_disable_2; + } + + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc < 0) { + net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n", + pci_name(pdev)); + goto err_free_res_3; + } + + pci_set_master(pdev); + + ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE); + if (!ioaddr) { + net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n", + pci_name(pdev)); + rc = -EIO; + goto err_free_res_3; + } + + tp->pci_dev = pdev; + tp->mmio_addr = ioaddr; + + sis190_irq_mask_and_ack(ioaddr); + + sis190_soft_reset(ioaddr); +out: + return dev; + +err_free_res_3: + pci_release_regions(pdev); +err_pci_disable_2: + pci_disable_device(pdev); +err_free_dev_1: + free_netdev(dev); +err_out_0: + dev = ERR_PTR(rc); + goto out; +} + +static void sis190_tx_timeout(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u8 tmp8; + + /* Disable Tx, if not already */ + tmp8 = SIS_R8(TxControl); + if (tmp8 & CmdTxEnb) + SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + /* Disable interrupts by clearing the interrupt mask. */ + SIS_W32(IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + sis190_tx_clear(tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything. */ + sis190_hw_start(dev); + + netif_wake_queue(dev); +} + +static void sis190_set_speed_auto(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + int val; + + net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); + + val = mdio_read(ioaddr, MII_ADVERTISE); + + // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 + // unchanged. + mdio_write(ioaddr, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + ADVERTISE_100FULL | ADVERTISE_10FULL | + ADVERTISE_100HALF | ADVERTISE_10HALF); + + // Enable 1000 Full Mode. + mdio_write(ioaddr, MII_CTRL1000, ADVERTISE_1000FULL); + + // Enable auto-negotiation and restart auto-negotiation. + mdio_write(ioaddr, MII_BMCR, + BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); +} + +static void sis190_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct sis190_private *tp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(tp->pci_dev)); +} + +static int sis190_get_regs_len(struct net_device *dev) +{ + return SIS190_REGS_SIZE; +} + +static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct sis190_private *tp = netdev_priv(dev); + unsigned long flags; + + if (regs->len > SIS190_REGS_SIZE) + regs->len = SIS190_REGS_SIZE; + + spin_lock_irqsave(&tp->lock, flags); + memcpy_fromio(p, tp->mmio_addr, regs->len); + spin_unlock_irqrestore(&tp->lock, flags); +} + +static u32 sis190_get_msglevel(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void sis190_set_msglevel(struct net_device *dev, u32 value) +{ + struct sis190_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static struct ethtool_ops sis190_ethtool_ops = { + .get_drvinfo = sis190_get_drvinfo, + .get_regs_len = sis190_get_regs_len, + .get_regs = sis190_get_regs, + .get_link = ethtool_op_get_link, + .get_msglevel = sis190_get_msglevel, + .set_msglevel = sis190_set_msglevel, +}; + +static int __devinit sis190_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int printed_version = 0; + struct sis190_private *tp; + struct net_device *dev; + void __iomem *ioaddr; + int i, rc; + + if (!printed_version) { + net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); + printed_version = 1; + } + + dev = sis190_init_board(pdev); + if (IS_ERR(dev)) { + rc = PTR_ERR(dev); + goto out; + } + + tp = netdev_priv(dev); + ioaddr = tp->mmio_addr; + + /* Get MAC address */ + /* Read node address from the EEPROM */ + + if (SIS_R32(ROMControl) & 0x4) { + for (i = 0; i < 3; i++) { + SIS_W16(RxMacAddr + 2*i, + sis190_read_eeprom(ioaddr, 3 + i)); + } + } + + for (i = 0; i < MAC_ADDR_LEN; i++) + dev->dev_addr[i] = SIS_R8(RxMacAddr + i); + + INIT_WORK(&tp->phy_task, sis190_phy_task, dev); + + dev->open = sis190_open; + dev->stop = sis190_close; + dev->get_stats = sis190_get_stats; + dev->tx_timeout = sis190_tx_timeout; + dev->watchdog_timeo = SIS190_TX_TIMEOUT; + dev->hard_start_xmit = sis190_start_xmit; + dev->set_multicast_list = sis190_set_rx_mode; + SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); + dev->irq = pdev->irq; + dev->base_addr = (unsigned long) 0xdead; + + spin_lock_init(&tp->lock); + rc = register_netdev(dev); + if (rc < 0) { + sis190_release_board(pdev); + goto out; + } + + pci_set_drvdata(pdev, dev); + + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + pci_name(pdev), sis_chip_info[ent->driver_data].name, + ioaddr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + netif_carrier_off(dev); + + sis190_set_speed_auto(dev); +out: + return rc; +} + +static void __devexit sis190_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + unregister_netdev(dev); + sis190_release_board(pdev); + pci_set_drvdata(pdev, NULL); +} + +static struct pci_driver sis190_pci_driver = { + .name = DRV_NAME, + .id_table = sis190_pci_tbl, + .probe = sis190_init_one, + .remove = __devexit_p(sis190_remove_one), +}; + +static int __init sis190_init_module(void) +{ + return pci_module_init(&sis190_pci_driver); +} + +static void __exit sis190_cleanup_module(void) +{ + pci_unregister_driver(&sis190_pci_driver); +} + +module_init(sis190_init_module); +module_exit(sis190_cleanup_module); -- cgit v1.2.3-70-g09d2 From 4405d3b5ef0a870e8d70ee4a3d050c89fcc40a86 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:09:20 +0200 Subject: [PATCH] sis190: netconsole support. netconsole support. This stuff should be factored out of every driver. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index fd303e7408a..e374cf43fed 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -629,6 +629,18 @@ out: return IRQ_RETVAL(handled); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sis190_netpoll(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *pdev = tp->pci_dev; + + disable_irq(pdev->irq); + sis190_interrupt(pdev->irq, dev, NULL); + enable_irq(pdev->irq); +} +#endif + static void sis190_free_rx_skb(struct sis190_private *tp, struct sk_buff **sk_buff, struct RxDesc *desc) { @@ -1300,6 +1312,9 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->tx_timeout = sis190_tx_timeout; dev->watchdog_timeo = SIS190_TX_TIMEOUT; dev->hard_start_xmit = sis190_start_xmit; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = sis190_netpoll; +#endif dev->set_multicast_list = sis190_set_rx_mode; SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops); dev->irq = pdev->irq; -- cgit v1.2.3-70-g09d2 From 43afb949a955a7d88f4baf43d5c676bf4c31ff6c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:10:21 +0200 Subject: [PATCH] sis190: ethtool/mii support. ethtool/mii support Bug: disabling autonegotiation and setting the link parameters at the same time does not provide the expected result. More investigation is needed. Note: past the initial probe/open time, the link is managed from user-space or accessed through sis190_phy_task, i.e. in a usermode context. Whence the very limited locking needs. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index e374cf43fed..ff4f24e5f59 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -230,6 +231,7 @@ struct sis190_private { struct work_struct phy_task; struct timer_list timer; u32 msg_enable; + struct mii_if_info mii_if; }; const static struct { @@ -308,6 +310,20 @@ static int mdio_read(void __iomem *ioaddr, int reg) return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); } +static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) +{ + struct sis190_private *tp = netdev_priv(dev); + + mdio_write(tp->mmio_addr, reg, val); +} + +static int __mdio_read(struct net_device *dev, int phy_id, int reg) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mdio_read(tp->mmio_addr, reg); +} + static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { unsigned int i; @@ -790,6 +806,8 @@ static void sis190_phy_task(void * data) void __iomem *ioaddr = tp->mmio_addr; u16 val; + rtnl_lock(); + val = mdio_read(ioaddr, MII_BMCR); if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 @@ -843,6 +861,8 @@ static void sis190_phy_task(void * data) p->msg); netif_carrier_on(dev); } + + rtnl_unlock(); } static void sis190_phy_timer(unsigned long __opaque) @@ -1150,6 +1170,13 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->pci_dev = pdev; tp->mmio_addr = ioaddr; + tp->mii_if.dev = dev; + tp->mii_if.mdio_read = __mdio_read; + tp->mii_if.mdio_write = __mdio_write; + // tp->mii_if.phy_id = XXX; + tp->mii_if.phy_id_mask = 0x1f; + tp->mii_if.reg_num_mask = 0x1f; + sis190_irq_mask_and_ack(ioaddr); sis190_soft_reset(ioaddr); @@ -1216,6 +1243,20 @@ static void sis190_set_speed_auto(struct net_device *dev) BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); } +static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_gset(&tp->mii_if, cmd); +} + +static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_ethtool_sset(&tp->mii_if, cmd); +} + static void sis190_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { @@ -1245,6 +1286,13 @@ static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs, spin_unlock_irqrestore(&tp->lock, flags); } +static int sis190_nway_reset(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + return mii_nway_restart(&tp->mii_if); +} + static u32 sis190_get_msglevel(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); @@ -1260,14 +1308,25 @@ static void sis190_set_msglevel(struct net_device *dev, u32 value) } static struct ethtool_ops sis190_ethtool_ops = { + .get_settings = sis190_get_settings, + .set_settings = sis190_set_settings, .get_drvinfo = sis190_get_drvinfo, .get_regs_len = sis190_get_regs_len, .get_regs = sis190_get_regs, .get_link = ethtool_op_get_link, .get_msglevel = sis190_get_msglevel, .set_msglevel = sis190_set_msglevel, + .nway_reset = sis190_nway_reset, }; +static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct sis190_private *tp = netdev_priv(dev); + + return !netif_running(dev) ? -EINVAL : + generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); +} + static int __devinit sis190_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1308,6 +1367,7 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->open = sis190_open; dev->stop = sis190_close; + dev->do_ioctl = sis190_ioctl; dev->get_stats = sis190_get_stats; dev->tx_timeout = sis190_tx_timeout; dev->watchdog_timeo = SIS190_TX_TIMEOUT; -- cgit v1.2.3-70-g09d2 From 188f23ba94a618b12cc205306f02b4f5036c4fa7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:11:43 +0200 Subject: [PATCH] sis190: merge some register related information from SiS driver. Merge some register related information from SiS driver. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index ff4f24e5f59..e67a5753882 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -98,27 +98,36 @@ enum sis190_registers { TxControl = 0x00, TxDescStartAddr = 0x04, - TxNextDescAddr = 0x0c, // unused + rsv0 = 0x08, // reserved + TxSts = 0x0c, // unused (Control/Status) RxControl = 0x10, RxDescStartAddr = 0x14, - RxNextDescAddr = 0x1c, // unused + rsv1 = 0x18, // reserved + RxSts = 0x1c, // unused IntrStatus = 0x20, IntrMask = 0x24, IntrControl = 0x28, - IntrTimer = 0x2c, // unused - PMControl = 0x30, // unused + IntrTimer = 0x2c, // unused (Interupt Timer) + PMControl = 0x30, // unused (Power Mgmt Control/Status) + rsv2 = 0x34, // reserved ROMControl = 0x38, ROMInterface = 0x3c, StationControl = 0x40, GMIIControl = 0x44, + GIoCR = 0x48, // unused (GMAC IO Compensation) + GIoCtrl = 0x4c, // unused (GMAC IO Control) TxMacControl = 0x50, + TxLimit = 0x54, // unused (Tx MAC Timer/TryLimit) + RGDelay = 0x58, // unused (RGMII Tx Internal Delay) + rsv3 = 0x5c, // reserved RxMacControl = 0x60, RxMacAddr = 0x62, RxHashTable = 0x68, // Undocumented = 0x6c, - RxWakeOnLan = 0x70, - // Undocumented = 0x74, - RxMPSControl = 0x78, // unused + RxWolCtrl = 0x70, + RxWolData = 0x74, // unused (Rx WOL Data Access) + RxMPSControl = 0x78, // unused (Rx MPS Control) + rsv4 = 0x7c, // reserved }; enum sis190_register_content { @@ -783,8 +792,8 @@ static void sis190_hw_start(struct net_device *dev) SIS_W16(RxMacControl, 0x02); SIS_W32(RxHashTable, 0x0); SIS_W32(0x6c, 0x0); - SIS_W32(RxWakeOnLan, 0x0); - SIS_W32(0x74, 0x0); + SIS_W32(RxWolCtrl, 0x0); + SIS_W32(RxWolData, 0x0); SIS_PCI_COMMIT(); @@ -1205,6 +1214,10 @@ static void sis190_tx_timeout(struct net_device *dev) if (tmp8 & CmdTxEnb) SIS_W8(TxControl, tmp8 & ~CmdTxEnb); + + net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n", + dev->name, SIS_R32(TxControl), SIS_R32(TxSts)); + /* Disable interrupts by clearing the interrupt mask. */ SIS_W32(IntrMask, 0x0000); -- cgit v1.2.3-70-g09d2 From 40292fb0f041362bca2f6ad975acedce4f6e3f3e Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:12:06 +0200 Subject: [PATCH] sis190: remove hardcoded constants. Replace hardcoded constants by enumerated values in sis190_read_eeprom The names of the enumerated values have been extracted from SiS'official driver (v1.00.00 published on 2005/07/11). Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index e67a5753882..d915507e90e 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -5,7 +5,8 @@ Copyright (c) 2003, 2004 Jeff Garzik Copyright (c) 2003, 2004, 2005 Francois Romieu - Based on r8169.c, tg3.c, 8139cp.c, skge.c and probably even epic100.c. + Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191 + genuine driver. This software may be used and distributed according to the terms of the GNU General Public License (GPL), incorporated herein by reference. @@ -221,6 +222,16 @@ enum _DescStatusBit { RxSizeMask = 0x0000ffff }; +enum sis190_eeprom_access_register_bits { + EECS = 0x00000001, // unused + EECLK = 0x00000002, // unused + EEDO = 0x00000008, // unused + EEDI = 0x00000004, // unused + EEREQ = 0x00000080, + EEROP = 0x00000200, + EEWOP = 0x00000100 // unused +}; + struct sis190_private { void __iomem *mmio_addr; struct pci_dev *pci_dev; @@ -333,27 +344,24 @@ static int __mdio_read(struct net_device *dev, int phy_id, int reg) return mdio_read(tp->mmio_addr, reg); } -static int sis190_read_eeprom(void __iomem *ioaddr, u32 reg) +static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { + u16 data = 0xffff; unsigned int i; - u16 data; - u32 val; if (!(SIS_R32(ROMControl) & 0x0002)) return 0; - val = (0x0080 | (0x2 << 8) | (reg << 10)); - - SIS_W32(ROMInterface, val); + SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10)); for (i = 0; i < 200; i++) { - if (!(SIS_R32(ROMInterface) & 0x0080)) + if (!(SIS_R32(ROMInterface) & EEREQ)) { + data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16; break; + } msleep(1); } - data = (u16) ((SIS_R32(ROMInterface) & 0xffff0000) >> 16); - return data; } -- cgit v1.2.3-70-g09d2 From 830fb7d23217ae748df0b16d4d419110810036b7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:12:37 +0200 Subject: [PATCH] sis190: initialisation of MAC address. Extract some mac addr code from SiS's driver. Some magic may hide beyond the isa bridge. The Rx mac control register is now set without condition. Note: good or bad, this part of the code is quite close to sis900.c. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 154 +++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 138 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index d915507e90e..1e8e7111c26 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -232,6 +232,14 @@ enum sis190_eeprom_access_register_bits { EEWOP = 0x00000100 // unused }; +/* EEPROM Addresses */ +enum sis190_eeprom_address { + EEPROMSignature = 0x00, + EEPROMCLK = 0x01, // unused + EEPROMInfo = 0x02, + EEPROMMACAddr = 0x03 +}; + struct sis190_private { void __iomem *mmio_addr; struct pci_dev *pci_dev; @@ -1240,6 +1248,125 @@ static void sis190_tx_timeout(struct net_device *dev) netif_wake_queue(dev); } +static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 sig; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n", + pci_name(pdev)); + + /* Check to see if there is a sane EEPROM */ + sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature); + + if ((sig == 0xffff) || (sig == 0x0000)) { + net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n", + pci_name(pdev), sig); + return -EIO; + } + + /* Get MAC address from EEPROM */ + for (i = 0; i < MAC_ADDR_LEN / 2; i++) { + u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + + ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); + } + + return 0; +} + +/** + * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model + * @pdev: PCI device + * @dev: network device to get address for + * + * SiS965 model, use APC CMOS RAM to store MAC address. + * APC CMOS RAM is accessed through ISA bridge. + * MAC address is read into @net_dev->dev_addr. + */ +static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, + struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct pci_dev *isa_bridge; + u8 reg, tmp8; + int i; + + net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n", + pci_name(pdev)); + + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL); + if (!isa_bridge) { + net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n", + pci_name(pdev)); + return -EIO; + } + + /* Enable port 78h & 79h to access APC Registers. */ + pci_read_config_byte(isa_bridge, 0x48, &tmp8); + reg = (tmp8 & ~0x02); + pci_write_config_byte(isa_bridge, 0x48, reg); + udelay(50); + pci_read_config_byte(isa_bridge, 0x48, ®); + + for (i = 0; i < MAC_ADDR_LEN; i++) { + outb(0x9 + i, 0x78); + dev->dev_addr[i] = inb(0x79); + } + + outb(0x12, 0x78); + reg = inb(0x79); + + /* Restore the value to ISA Bridge */ + pci_write_config_byte(isa_bridge, 0x48, tmp8); + pci_dev_put(isa_bridge); + + return 0; +} + +/** + * sis190_init_rxfilter - Initialize the Rx filter + * @dev: network device to initialize + * + * Set receive filter address to our MAC address + * and enable packet filtering. + */ +static inline void sis190_init_rxfilter(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 ctl; + int i; + + ctl = SIS_R16(RxMacControl); + /* + * Disable packet filtering before setting filter. + * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits + * only and followed by RxMacAddr (6 bytes). Strange. -- FR + */ + SIS_W16(RxMacControl, ctl & ~0x0f00); + + for (i = 0; i < MAC_ADDR_LEN; i++) + SIS_W8(RxMacAddr + i, dev->dev_addr[i]); + + SIS_W16(RxMacControl, ctl); + SIS_PCI_COMMIT(); +} + +static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) +{ + u8 from; + + pci_read_config_byte(pdev, 0x73, &from); + + return (from & 0x00000001) ? + sis190_get_mac_addr_from_apc(pdev, dev) : + sis190_get_mac_addr_from_eeprom(pdev, dev); +} + static void sis190_set_speed_auto(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); @@ -1355,7 +1482,7 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, struct sis190_private *tp; struct net_device *dev; void __iomem *ioaddr; - int i, rc; + int rc; if (!printed_version) { net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n"); @@ -1371,18 +1498,11 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, tp = netdev_priv(dev); ioaddr = tp->mmio_addr; - /* Get MAC address */ - /* Read node address from the EEPROM */ - - if (SIS_R32(ROMControl) & 0x4) { - for (i = 0; i < 3; i++) { - SIS_W16(RxMacAddr + 2*i, - sis190_read_eeprom(ioaddr, 3 + i)); - } - } + rc = sis190_get_mac_addr(pdev, dev); + if (rc < 0) + goto err_release_board; - for (i = 0; i < MAC_ADDR_LEN; i++) - dev->dev_addr[i] = SIS_R8(RxMacAddr + i); + sis190_init_rxfilter(dev); INIT_WORK(&tp->phy_task, sis190_phy_task, dev); @@ -1403,10 +1523,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, spin_lock_init(&tp->lock); rc = register_netdev(dev); - if (rc < 0) { - sis190_release_board(pdev); - goto out; - } + if (rc < 0) + goto err_release_board; pci_set_drvdata(pdev, dev); @@ -1423,6 +1541,10 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, sis190_set_speed_auto(dev); out: return rc; + +err_release_board: + sis190_release_board(pdev); + goto out; } static void __devexit sis190_remove_one(struct pci_dev *pdev) -- cgit v1.2.3-70-g09d2 From 8b5641d4f1f7376257783b79f121a19ccd86b56b Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:13:03 +0200 Subject: [PATCH] sis190: the size of the Rx buffer is constrained Add a restriction to the size of the Rx buffer SiS driver forces the size of any Rx buffer to be a multiple of 64 bit. I would not be surprized that it goes along with some alignment issues which have been experienced before. So far it does not make much of a difference (both drivers use 1536 bytes buffer). Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 1e8e7111c26..2229698debb 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -69,6 +69,7 @@ #define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) #define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) #define RX_BUF_SIZE 1536 +#define RX_BUF_MASK 0xfff8 #define SIS190_REGS_SIZE 0x80 #define SIS190_TX_TIMEOUT (6*HZ) @@ -400,7 +401,7 @@ static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz) u32 eor = le32_to_cpu(desc->size) & RingEnd; desc->PSize = 0x0; - desc->size = cpu_to_le32(rx_buf_sz | eor); + desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor); wmb(); desc->status = cpu_to_le32(OWNbit | INTbit); } @@ -924,6 +925,11 @@ static void sis190_set_rxbufsize(struct sis190_private *tp, unsigned int mtu = dev->mtu; tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + /* RxDesc->size has a licence to kill the lower bits */ + if (tp->rx_buf_sz & 0x07) { + tp->rx_buf_sz += 8; + tp->rx_buf_sz &= RX_BUF_MASK; + } } static int sis190_open(struct net_device *dev) -- cgit v1.2.3-70-g09d2 From bcad5e537840ef6fa28b2f1e126fefb4c39a7248 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:13:47 +0200 Subject: [PATCH] sis190: extract bits definition from SiS driver. extract bits definition from SiS driver - fix the Rx stats; - minor pieces of documentation. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 102 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 74 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 2229698debb..3c33b2d1485 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -64,8 +64,8 @@ #define MAC_ADDR_LEN 6 -#define NUM_TX_DESC 64 -#define NUM_RX_DESC 64 +#define NUM_TX_DESC 64 /* [8..1024] */ +#define NUM_RX_DESC 64 /* [8..8192] */ #define TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) #define RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) #define RX_BUF_SIZE 1536 @@ -149,12 +149,6 @@ enum sis190_register_content { RxHalt = 0x00000002, TxHalt = 0x00000001, - /* RxStatusDesc */ - RxRES = 0x00200000, // unused - RxCRC = 0x00080000, - RxRUNT = 0x00100000, // unused - RxRWT = 0x00400000, // unused - /* {Rx/Tx}CmdBits */ CmdReset = 0x10, CmdRxEnb = 0x08, // unused @@ -212,15 +206,55 @@ struct RxDesc { enum _DescStatusBit { /* _Desc.status */ - OWNbit = 0x80000000, - INTbit = 0x40000000, - DEFbit = 0x00200000, - CRCbit = 0x00020000, - PADbit = 0x00010000, + OWNbit = 0x80000000, // RXOWN/TXOWN + INTbit = 0x40000000, // RXINT/TXINT + CRCbit = 0x00020000, // CRCOFF/CRCEN + PADbit = 0x00010000, // PREADD/PADEN /* _Desc.size */ - RingEnd = (1 << 31), - /* _Desc.PSize */ + RingEnd = 0x80000000, + /* TxDesc.status */ + LSEN = 0x08000000, // TSO ? -- FR + IPCS = 0x04000000, + TCPCS = 0x02000000, + UDPCS = 0x01000000, + BSTEN = 0x00800000, + EXTEN = 0x00400000, + DEFEN = 0x00200000, + BKFEN = 0x00100000, + CRSEN = 0x00080000, + COLEN = 0x00040000, + THOL3 = 0x30000000, + THOL2 = 0x20000000, + THOL1 = 0x10000000, + THOL0 = 0x00000000, + /* RxDesc.status */ + IPON = 0x20000000, + TCPON = 0x10000000, + UDPON = 0x08000000, + Wakup = 0x00400000, + Magic = 0x00200000, + Pause = 0x00100000, + DEFbit = 0x00200000, + BCAST = 0x000c0000, + MCAST = 0x00080000, + UCAST = 0x00040000, + /* RxDesc.PSize */ + TAGON = 0x80000000, + RxDescCountMask = 0x7f000000, // multi-desc pkt when > 1 ? -- FR + ABORT = 0x00800000, + SHORT = 0x00400000, + LIMIT = 0x00200000, + MIIER = 0x00100000, + OVRUN = 0x00080000, + NIBON = 0x00040000, + COLON = 0x00020000, + CRCOK = 0x00010000, RxSizeMask = 0x0000ffff + /* + * The asic could apparently do vlan, TSO, jumbo (sis191 only) and + * provide two (unused with Linux) Tx queues. No publically + * available documentation alas. + */ }; enum sis190_eeprom_access_register_bits { @@ -487,6 +521,26 @@ static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, return ret; } +static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats) +{ +#define ErrMask (OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT) + + if ((status & CRCOK) && !(status & ErrMask)) + return 0; + + if (!(status & CRCOK)) + stats->rx_crc_errors++; + else if (status & OVRUN) + stats->rx_over_errors++; + else if (status & (SHORT | LIMIT)) + stats->rx_length_errors++; + else if (status & (MIIER | NIBON | COLON)) + stats->rx_frame_errors++; + + stats->rx_errors++; + return -1; +} + static int sis190_rx_interrupt(struct net_device *dev, struct sis190_private *tp, void __iomem *ioaddr) { @@ -510,19 +564,9 @@ static int sis190_rx_interrupt(struct net_device *dev, // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name, // status); - if (status & RxCRC) { - net_intr(tp, KERN_INFO "%s: bad crc. status = %08x.\n", - dev->name, status); - stats->rx_errors++; - stats->rx_crc_errors++; + if (sis190_rx_pkt_err(status, stats) < 0) sis190_give_to_asic(desc, tp->rx_buf_sz); - } else if (!(status & PADbit)) { - net_intr(tp, KERN_INFO "%s: bad pad. status = %08x.\n", - dev->name, status); - stats->rx_errors++; - stats->rx_length_errors++; - sis190_give_to_asic(desc, tp->rx_buf_sz); - } else { + else { struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & RxSizeMask) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, @@ -559,8 +603,10 @@ static int sis190_rx_interrupt(struct net_device *dev, sis190_rx_skb(skb); dev->last_rx = jiffies; - stats->rx_bytes += pkt_size; stats->rx_packets++; + stats->rx_bytes += pkt_size; + if ((status & BCAST) == MCAST) + stats->multicast++; } } count = cur_rx - tp->cur_rx; -- cgit v1.2.3-70-g09d2 From 3cec93c7124c3037dbff826d6c08e9758a301cd7 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:14:18 +0200 Subject: [PATCH] sis190: add endian annotations. Add endian annotations. Signed-off-by: Alexey Dobriyan Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 3c33b2d1485..2387d484403 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -191,17 +191,17 @@ enum sis190_register_content { }; struct TxDesc { - u32 PSize; - u32 status; - u32 addr; - u32 size; + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; }; struct RxDesc { - u32 PSize; - u32 status; - u32 addr; - u32 size; + __le32 PSize; + __le32 status; + __le32 addr; + __le32 size; }; enum _DescStatusBit { @@ -1322,7 +1322,7 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, /* Get MAC address from EEPROM */ for (i = 0; i < MAC_ADDR_LEN / 2; i++) { - u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); ((u16 *)dev->dev_addr)[0] = le16_to_cpu(w); } -- cgit v1.2.3-70-g09d2 From 9ede109bbe93d5bbe4271e346106847fbfea95a1 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:14:38 +0200 Subject: [PATCH] sis190: allow a non-hardcoded ID for the PHY. Allow a non-hardcoded ID for the PHY This is the first step before the driver probes for the PHY address. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 2387d484403..f78799c4235 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -354,21 +354,17 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) printk(KERN_ERR PFX "PHY command failed !\n"); } -static void mdio_write(void __iomem *ioaddr, int reg, int val) +static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val) { - u32 pmd = 1; - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite | - (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift) | + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) | (((u32) val) << EhnMIIdataShift)); } -static int mdio_read(void __iomem *ioaddr, int reg) +static int mdio_read(void __iomem *ioaddr, int phy_id, int reg) { - u32 pmd = 1; - __mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread | - (((u32) reg) << EhnMIIregShift) | (pmd << EhnMIIpmdShift)); + (((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift)); return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift); } @@ -377,14 +373,14 @@ static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val) { struct sis190_private *tp = netdev_priv(dev); - mdio_write(tp->mmio_addr, reg, val); + mdio_write(tp->mmio_addr, phy_id, reg, val); } static int __mdio_read(struct net_device *dev, int phy_id, int reg) { struct sis190_private *tp = netdev_priv(dev); - return mdio_read(tp->mmio_addr, reg); + return mdio_read(tp->mmio_addr, phy_id, reg); } static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) @@ -876,18 +872,19 @@ static void sis190_phy_task(void * data) struct net_device *dev = data; struct sis190_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; u16 val; rtnl_lock(); - val = mdio_read(ioaddr, MII_BMCR); + val = mdio_read(ioaddr, phy_id, MII_BMCR); if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 mod_timer(&tp->timer, jiffies + HZ/10); - } else if (!(mdio_read(ioaddr, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + } else if (!(mdio_read(ioaddr, phy_id, MII_BMSR) & BMSR_ANEGCOMPLETE)) { net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", dev->name); - mdio_write(ioaddr, MII_BMCR, val | BMCR_RESET); + mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT); } else { /* Rejoice ! */ @@ -917,10 +914,10 @@ static void sis190_phy_task(void * data) { 0, "unknown", 0x0000 } }, *p; - val = mdio_read(ioaddr, 0x1f); + val = mdio_read(ioaddr, phy_id, 0x1f); net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); - val = mdio_read(ioaddr, MII_LPA); + val = mdio_read(ioaddr, phy_id, MII_LPA); net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); for (p = reg31; p->ctl; p++) { @@ -1250,7 +1247,7 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->mii_if.dev = dev; tp->mii_if.mdio_read = __mdio_read; tp->mii_if.mdio_write = __mdio_write; - // tp->mii_if.phy_id = XXX; + tp->mii_if.phy_id = 1; tp->mii_if.phy_id_mask = 0x1f; tp->mii_if.reg_num_mask = 0x1f; @@ -1423,23 +1420,24 @@ static void sis190_set_speed_auto(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->mmio_addr; + int phy_id = tp->mii_if.phy_id; int val; net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name); - val = mdio_read(ioaddr, MII_ADVERTISE); + val = mdio_read(ioaddr, phy_id, MII_ADVERTISE); // Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0 // unchanged. - mdio_write(ioaddr, MII_ADVERTISE, (val & ADVERTISE_SLCT) | + mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) | ADVERTISE_100FULL | ADVERTISE_10FULL | ADVERTISE_100HALF | ADVERTISE_10HALF); // Enable 1000 Full Mode. - mdio_write(ioaddr, MII_CTRL1000, ADVERTISE_1000FULL); + mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL); // Enable auto-negotiation and restart auto-negotiation. - mdio_write(ioaddr, MII_BMCR, + mdio_write(ioaddr, phy_id, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET); } -- cgit v1.2.3-70-g09d2 From fc10c39d7920b1db9ad2d80fa845896e529355dc Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:01 +0200 Subject: [PATCH] sis190: dummy read is required by the status register Add a dummy read before accessing the status register SiS driver suggests it. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index f78799c4235..392110ede7b 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -383,6 +383,12 @@ static int __mdio_read(struct net_device *dev, int phy_id, int reg) return mdio_read(tp->mmio_addr, phy_id, reg); } +static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg) +{ + mdio_read(ioaddr, phy_id, reg); + return mdio_read(ioaddr, phy_id, reg); +} + static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg) { u16 data = 0xffff; @@ -881,7 +887,8 @@ static void sis190_phy_task(void * data) if (val & BMCR_RESET) { // FIXME: needlessly high ? -- FR 02/07/2005 mod_timer(&tp->timer, jiffies + HZ/10); - } else if (!(mdio_read(ioaddr, phy_id, MII_BMSR) & BMSR_ANEGCOMPLETE)) { + } else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) & + BMSR_ANEGCOMPLETE)) { net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n", dev->name); mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET); -- cgit v1.2.3-70-g09d2 From fcb9821d3dd62ede360e7991734ac22b79e9a4f0 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:22 +0200 Subject: [PATCH] sis190: new PHY detection code. New PHY detection code. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 216 +++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 209 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 392110ede7b..fe2ab6fd138 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -43,6 +43,10 @@ #define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \ printk(arg) +#define PHY_MAX_ADDR 32 +#define PHY_ID_ANY 0x1f +#define MII_REG_ANY 0x1f + #ifdef CONFIG_SIS190_NAPI #define NAPI_SUFFIX "-NAPI" #else @@ -295,6 +299,33 @@ struct sis190_private { struct timer_list timer; u32 msg_enable; struct mii_if_info mii_if; + struct list_head first_phy; +}; + +struct sis190_phy { + struct list_head list; + int phy_id; + u16 id[2]; + u16 status; + u8 type; +}; + +enum sis190_phy_type { + UNKNOWN = 0x00, + HOME = 0x01, + LAN = 0x02, + MIX = 0x03 +}; + +static struct mii_chip_info { + const char *name; + u16 id[2]; + unsigned int type; +} mii_chip_table[] = { + { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN }, + { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN }, + { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN }, + { NULL, } }; const static struct { @@ -1174,6 +1205,177 @@ static struct net_device_stats *sis190_get_stats(struct net_device *dev) return &tp->stats; } +static void sis190_free_phy(struct list_head *first_phy) +{ + struct sis190_phy *cur, *next; + + list_for_each_entry_safe(cur, next, first_phy, list) { + kfree(cur); + } +} + +/** + * sis190_default_phy - Select default PHY for sis190 mac. + * @dev: the net device to probe for + * + * Select first detected PHY with link as default. + * If no one is link on, select PHY whose types is HOME as default. + * If HOME doesn't exist, select LAN. + */ +static u16 sis190_default_phy(struct net_device *dev) +{ + struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan; + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + phy_home = phy_default = phy_lan = NULL; + + list_for_each_entry(phy, &tp->first_phy, list) { + status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR); + + // Link ON & Not select default PHY & not ghost PHY. + if ((status & BMSR_LSTATUS) && + !phy_default && + (phy->type != UNKNOWN)) { + phy_default = phy; + } else { + status = mdio_read(ioaddr, phy->phy_id, MII_BMCR); + mdio_write(ioaddr, phy->phy_id, MII_BMCR, + status | BMCR_ANENABLE | BMCR_ISOLATE); + if (phy->type == HOME) + phy_home = phy; + else if (phy->type == LAN) + phy_lan = phy; + } + } + + if (!phy_default) { + if (phy_home) + phy_default = phy_home; + else if (phy_lan) + phy_default = phy_lan; + else + phy_default = list_entry(&tp->first_phy, + struct sis190_phy, list); + } + + if (mii_if->phy_id != phy_default->phy_id) { + mii_if->phy_id = phy_default->phy_id; + net_probe(tp, KERN_INFO + "%s: Using transceiver at address %d as default.\n", + dev->name, mii_if->phy_id); + } + + status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); + status &= (~BMCR_ISOLATE); + + mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status); + status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR); + + return status; +} + +static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, + struct sis190_phy *phy, unsigned int phy_id, + u16 mii_status) +{ + void __iomem *ioaddr = tp->mmio_addr; + struct mii_chip_info *p; + + INIT_LIST_HEAD(&phy->list); + phy->status = mii_status; + phy->phy_id = phy_id; + + phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1); + phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2); + + for (p = mii_chip_table; p->type; p++) { + if ((p->id[0] == phy->id[0]) && + (p->id[1] == (phy->id[1] & 0xfff0))) { + break; + } + } + + if (p->id[1]) { + phy->type = (p->type == MIX) ? + ((mii_status & (BMSR_100FULL | BMSR_100HALF)) ? + LAN : HOME) : p->type; + } else + phy->type = UNKNOWN; + + net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", + dev->name, (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, + phy_id); +} + +/** + * sis190_mii_probe - Probe MII PHY for sis190 + * @dev: the net device to probe for + * + * Search for total of 32 possible mii phy addresses. + * Identify and set current phy if found one, + * return error if it failed to found. + */ +static int __devinit sis190_mii_probe(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + struct mii_if_info *mii_if = &tp->mii_if; + void __iomem *ioaddr = tp->mmio_addr; + int phy_id; + int rc = 0; + + INIT_LIST_HEAD(&tp->first_phy); + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + struct sis190_phy *phy; + u16 status; + + status = mdio_read_latched(ioaddr, phy_id, MII_BMSR); + + // Try next mii if the current one is not accessible. + if (status == 0xffff || status == 0x0000) + continue; + + phy = kmalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) { + sis190_free_phy(&tp->first_phy); + rc = -ENOMEM; + goto out; + } + + sis190_init_phy(dev, tp, phy, phy_id, status); + + list_add(&tp->first_phy, &phy->list); + } + + if (list_empty(&tp->first_phy)) { + net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", + dev->name); + rc = -EIO; + goto out; + } + + /* Select default PHY for mac */ + sis190_default_phy(dev); + + mii_if->dev = dev; + mii_if->mdio_read = __mdio_read; + mii_if->mdio_write = __mdio_write; + mii_if->phy_id_mask = PHY_ID_ANY; + mii_if->reg_num_mask = MII_REG_ANY; +out: + return rc; +} + +static void __devexit sis190_mii_remove(struct net_device *dev) +{ + struct sis190_private *tp = netdev_priv(dev); + + sis190_free_phy(&tp->first_phy); +} + static void sis190_release_board(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); @@ -1251,13 +1453,6 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev) tp->pci_dev = pdev; tp->mmio_addr = ioaddr; - tp->mii_if.dev = dev; - tp->mii_if.mdio_read = __mdio_read; - tp->mii_if.mdio_write = __mdio_write; - tp->mii_if.phy_id = 1; - tp->mii_if.phy_id_mask = 0x1f; - tp->mii_if.reg_num_mask = 0x1f; - sis190_irq_mask_and_ack(ioaddr); sis190_soft_reset(ioaddr); @@ -1585,6 +1780,10 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); + rc = sis190_mii_probe(dev); + if (rc < 0) + goto err_unregister_dev; + net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", pci_name(pdev), sis_chip_info[ent->driver_data].name, @@ -1599,6 +1798,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, out: return rc; +err_unregister_dev: + unregister_netdev(dev); err_release_board: sis190_release_board(pdev); goto out; @@ -1608,6 +1809,7 @@ static void __devexit sis190_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); + sis190_mii_remove(dev); unregister_netdev(dev); sis190_release_board(pdev); pci_set_drvdata(pdev, NULL); -- cgit v1.2.3-70-g09d2 From 560d3d521decc6d05dc0d6e007f1d2e1d3048102 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:15:51 +0200 Subject: [PATCH] sis190: PHY identifier for the K8S-MX motherboard. Added PHY identifier for the Asus K8S-MX motherboard Note: the same ID appears in the sis900 driver. Signed-off-by: Lars Vahlenberg Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index fe2ab6fd138..84bc2299f93 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -325,6 +325,7 @@ static struct mii_chip_info { { "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN }, { "Agere PHY ET1101B", { 0x0282, 0xf010 }, LAN }, { "Marvell PHY 88E1111", { 0x0141, 0x0cc0 }, LAN }, + { "Realtek PHY RTL8201", { 0x0000, 0x8200 }, LAN }, { NULL, } }; -- cgit v1.2.3-70-g09d2 From 8348b4db5f56d2c0d3849db06055225ec15b255a Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 30 Jul 2005 13:16:14 +0200 Subject: [PATCH] sis190: compare the lpa to the local advertisement The station control register must depend on both the advertisement and the lpa The link partner ability has better be intersected with the current advertised value before it is feed to the station control register. Sight-catched-by: Lars Vahlenberg Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 84bc2299f93..915ff009c29 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -952,12 +952,17 @@ static void sis190_phy_task(void * data) 0x01 | _10bpsH }, { 0, "unknown", 0x0000 } }, *p; + u16 adv; val = mdio_read(ioaddr, phy_id, 0x1f); net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val); val = mdio_read(ioaddr, phy_id, MII_LPA); - net_link(tp, KERN_INFO "%s: mii lpa = %04x.\n", dev->name, val); + adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE); + net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n", + dev->name, val, adv); + + val &= adv; for (p = reg31; p->ctl; p++) { if ((val & p->val) == p->val) -- cgit v1.2.3-70-g09d2 From ea8f400c98ec9ae0604bc5a6721174ef68635815 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Thu, 11 Aug 2005 15:09:23 -0400 Subject: [netdrvr tulip] Remove ULi-specific code from generic tulip driver It has a separate driver now, 'uli526x'. --- drivers/net/tulip/media.c | 36 ------------------------------------ drivers/net/tulip/timer.c | 1 - drivers/net/tulip/tulip.h | 8 ++------ drivers/net/tulip/tulip_core.c | 34 +++++++++++----------------------- 4 files changed, 13 insertions(+), 66 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index e26c31f944b..f53396fe79c 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location) return retval & 0xffff; } - if(tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x08000000; - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - mdio_delay(); - if(ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - retval = ioread32(ioaddr + CSR10); - spin_unlock_irqrestore(&tp->mii_lock, flags); - return retval & 0xFFFF; - } /* Establish sync by sending at least 32 logic ones. */ for (i = 32; i >= 0; i--) { iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr); @@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) spin_unlock_irqrestore(&tp->mii_lock, flags); return; } - if (tp->chip_id == ULI526X && tp->revision >= 0x40) { - int value; - int i = 1000; - - value = ioread32(ioaddr + CSR9); - iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9); - - value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF); - iowrite32(value, ioaddr + CSR10); - - while(--i > 0) { - if (ioread32(ioaddr + CSR10) & 0x10000000) - break; - } - spin_unlock_irqrestore(&tp->mii_lock, flags); - return; - } /* Establish sync by sending 32 logic ones. */ for (i = 32; i >= 0; i--) { diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 69156828355..e058a9fbfe8 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -39,7 +39,6 @@ void tulip_timer(unsigned long data) case MX98713: case COMPEX9881: case DM910X: - case ULI526X: default: { struct medialeaf *mleaf; unsigned char *p; diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 20346d847d9..05d2d96f7be 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -88,7 +88,6 @@ enum chips { I21145, DM910X, CONEXANT, - ULI526X }; @@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp) static inline void tulip_restart_rxtx(struct tulip_private *tp) { - if(!(tp->chip_id == ULI526X && - (tp->revision == 0x40 || tp->revision == 0x50))) { - tulip_stop_rxtx(tp); - udelay(5); - } + tulip_stop_rxtx(tp); + udelay(5); tulip_start_rxtx(tp); } diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d45d8f56e5b..05da5bea564 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = { { "Conexant LANfinity", 256, 0x0001ebef, HAS_MII | HAS_ACPI, tulip_timer }, - /* ULi526X */ - { "ULi M5261/M5263", 128, 0x0001ebef, - HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer }, }; @@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, - { 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ - { 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X }, /* ALi 1563 integrated ethernet */ { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */ { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */ { } /* terminate list */ @@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev) dev->name); } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 - || tp->chip_id == DM910X || tp->chip_id == ULI526X) { + || tp->chip_id == DM910X) { printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), @@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev) entry = tp->cur_tx++ % TX_RING_SIZE; if (entry != 0) { - /* Avoid a chip errata by prefixing a dummy entry. Don't do - this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { - tp->tx_buffers[entry].skb = NULL; - tp->tx_buffers[entry].mapping = 0; - tp->tx_ring[entry].length = - (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; - tp->tx_ring[entry].buffer1 = 0; - /* Must set DescOwned later to avoid race with chip */ - dummy = entry; - entry = tp->cur_tx++ % TX_RING_SIZE; - } + /* Avoid a chip errata by prefixing a dummy entry. */ + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tp->tx_ring[entry].length = + (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0; + tp->tx_ring[entry].buffer1 = 0; + /* Must set DescOwned later to avoid race with chip */ + dummy = entry; + entry = tp->cur_tx++ % TX_RING_SIZE; + } tp->tx_buffers[entry].skb = NULL; @@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev) { if (pdev->vendor == 0x1282 && pdev->device == 0x9102) return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5261) - return 1; - if (pdev->vendor == 0x10b9 && pdev->device == 0x5263) - return 1; return 0; } @@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, switch (chip_idx) { case DC21140: case DM910X: - case ULI526X: default: if (tp->mtable) iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12); -- cgit v1.2.3-70-g09d2 From e9985d53e3da3b51d0334d0622c449fda78ae089 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 9 Aug 2005 02:41:00 +0200 Subject: [PATCH] SIS190 must select MII SIS190 must select MII since it's using it. While I was editing the Kconfig entry, I also converted the spaces to tabs. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 765fbb29d38..26e4aa93afd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1922,14 +1922,15 @@ config R8169_VLAN If in doubt, say Y. config SIS190 - tristate "SiS190 gigabit ethernet support" - depends on PCI - select CRC32 - ---help--- - Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. - - To compile this driver as a module, choose M here: the module - will be called sis190. This is recommended. + tristate "SiS190 gigabit ethernet support" + depends on PCI + select CRC32 + select MII + ---help--- + Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called sis190. This is recommended. config SKGE tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" -- cgit v1.2.3-70-g09d2 From 945a787675cc5ba362f5d4ce135d2a2c20be5985 Mon Sep 17 00:00:00 2001 From: Peer Chen Date: Sat, 20 Aug 2005 01:10:06 -0400 Subject: [netdrvr uli526x] fix problems found in review - s/DEVICE/net_device/ - improve formatting - remove dead code - check return value, in several areas --- drivers/net/tulip/uli526x.c | 207 ++++++++++++++++++++------------------------ 1 file changed, 93 insertions(+), 114 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index 27f99e087f7..5ae22b7bc5c 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -56,8 +56,7 @@ #define RX_ALLOC_SIZE 0x620 #define ULI526X_RESET 1 #define CR0_DEFAULT 0 -#define CR6_DEFAULT 0x00080000 /* HD */ -#define CR6_DEFAULT_A 0x22240000 +#define CR6_DEFAULT 0x22200000 #define CR7_DEFAULT 0x180c1 #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ @@ -103,10 +102,13 @@ #define SROM_V41_CODE 0x14 -#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5); - -/* Sten Check */ -#define DEVICE net_device +#define SROM_CLK_WRITE(data, ioaddr) \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ + udelay(5); \ + outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ + udelay(5); /* Structure/enum declaration ------------------------------- */ struct tx_desc { @@ -123,7 +125,7 @@ struct rx_desc { struct uli526x_board_info { u32 chip_id; /* Chip vendor/Device ID */ - struct DEVICE *next_dev; /* next device */ + struct net_device *next_dev; /* next device */ struct pci_dev *pdev; /* PCI device */ spinlock_t lock; @@ -212,22 +214,21 @@ static u32 uli526x_cr6_user_set; /* For module input parameter */ static int debug; static u32 cr6set; -static u32 m526x_id; static unsigned char mode = 8; /* function declaration ------------------------------------- */ -static int uli526x_open(struct DEVICE *); -static int uli526x_start_xmit(struct sk_buff *, struct DEVICE *); -static int uli526x_stop(struct DEVICE *); -static struct net_device_stats * uli526x_get_stats(struct DEVICE *); -static void uli526x_set_filter_mode(struct DEVICE *); +static int uli526x_open(struct net_device *); +static int uli526x_start_xmit(struct sk_buff *, struct net_device *); +static int uli526x_stop(struct net_device *); +static struct net_device_stats * uli526x_get_stats(struct net_device *); +static void uli526x_set_filter_mode(struct net_device *); static struct ethtool_ops netdev_ethtool_ops; -static u16 read_srom_word(long ,int); -static irqreturn_t uli526x_interrupt(int , void *, struct pt_regs *); +static u16 read_srom_word(long, int); +static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *); static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); -static void send_filter_frame(struct DEVICE * ,int); +static void send_filter_frame(struct net_device *, int); static u16 phy_read(unsigned long, u8, u8, u32); static u16 phy_readby_cr10(unsigned long, u8, u8); static void phy_write(unsigned long, u8, u8, u16, u32); @@ -237,18 +238,18 @@ static u16 phy_read_1bit(unsigned long, u32); static u8 uli526x_sense_speed(struct uli526x_board_info *); static void uli526x_process_mode(struct uli526x_board_info *); static void uli526x_timer(unsigned long); -static void uli526x_rx_packet(struct DEVICE *, struct uli526x_board_info *); -static void uli526x_free_tx_pkt(struct DEVICE *, struct uli526x_board_info *); +static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *); +static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *); static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *); -static void uli526x_dynamic_reset(struct DEVICE *); +static void uli526x_dynamic_reset(struct net_device *); static void uli526x_free_rxbuffer(struct uli526x_board_info *); -static void uli526x_init(struct DEVICE *); +static void uli526x_init(struct net_device *); static void uli526x_set_phyxcer(struct uli526x_board_info *); -/* ULI526X network baord routine ---------------------------- */ +/* ULI526X network board routine ---------------------------- */ /* - * Search ULI526X board ,allocate space and register it + * Search ULI526X board, allocate space and register it */ static int __devinit uli526x_init_one (struct pci_dev *pdev, @@ -257,8 +258,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, struct uli526x_board_info *db; /* board information structure */ struct net_device *dev; int i, err; - u32 configval; - + ULI526X_DBUG(0, "uli526x_init_one()", 0); if (!printed_version++) @@ -271,7 +271,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - if (pci_set_dma_mask(pdev, 0xffffffff)) { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n"); err = -ENODEV; goto err_out_free; @@ -300,23 +300,23 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, goto err_out_disable; } - //add by clearzhang 2004/7/8 - pci_read_config_dword(pdev,0x0,&configval); - m526x_id = configval; - if(configval == 0x526310b9) - { - //printk("is m5263\n"); - pci_read_config_dword(pdev,0x0c,&configval); - configval = ((configval & 0xffff00ff) | 0x8000); - pci_write_config_dword(pdev,0x0c,configval); - } /* Init system & device */ db = netdev_priv(dev); /* Allocate Tx/Rx descriptor memory */ db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); + if(db->desc_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); - + if(db->buf_pool_ptr == NULL) + { + err = -ENOMEM; + goto err_out_nomem; + } + db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; db->first_tx_desc_dma = db->desc_pool_dma_ptr; db->buf_pool_start = db->buf_pool_ptr; @@ -347,7 +347,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i)); /* Set Node address */ - if(((u16 *) db->srom)[0] == 0xffff) /* SROM absent, so read MAC address from ID Table */ + if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0) /* SROM absent, so read MAC address from ID Table */ { outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port @@ -385,6 +385,14 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, err_out_res: pci_release_regions(pdev); +err_out_nomem: + if(db->desc_pool_ptr) + pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, + db->desc_pool_ptr, db->desc_pool_dma_ptr); + + if(db->buf_pool_ptr != NULL) + pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); err_out_disable: pci_disable_device(pdev); err_out_free: @@ -402,32 +410,30 @@ static void __devexit uli526x_remove_one (struct pci_dev *pdev) ULI526X_DBUG(0, "uli526x_remove_one()", 0); - if (dev) { - pci_free_consistent(db->pdev, sizeof(struct tx_desc) * - DESC_ALL_CNT + 0x20, db->desc_pool_ptr, - db->desc_pool_dma_ptr); - pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, - db->buf_pool_ptr, db->buf_pool_dma_ptr); - unregister_netdev(dev); - pci_release_regions(pdev); - free_netdev(dev); /* free board information */ - pci_set_drvdata(pdev, NULL); - } - + pci_free_consistent(db->pdev, sizeof(struct tx_desc) * + DESC_ALL_CNT + 0x20, db->desc_pool_ptr, + db->desc_pool_dma_ptr); + pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, + db->buf_pool_ptr, db->buf_pool_dma_ptr); + unregister_netdev(dev); + pci_release_regions(pdev); + free_netdev(dev); /* free board information */ + pci_set_drvdata(pdev, NULL); + pci_disable_device(pdev); ULI526X_DBUG(0, "uli526x_remove_one() exit", 0); } /* * Open the interface. - * The interface is opened whenever "ifconfig" actives it. + * The interface is opened whenever "ifconfig" activates it. */ -static int uli526x_open(struct DEVICE *dev) +static int uli526x_open(struct net_device *dev) { int ret; struct uli526x_board_info *db = netdev_priv(dev); - + ULI526X_DBUG(0, "uli526x_open", 0); ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev); @@ -436,11 +442,6 @@ static int uli526x_open(struct DEVICE *dev) /* system variable init */ db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set; - if(m526x_id == 0x526310b9) - { - //printk("is 5263\n"); - db->cr6_data = CR6_DEFAULT_A | uli526x_cr6_user_set; - } db->tx_packet_cnt = 0; db->rx_avail_cnt = 0; db->link_failed = 1; @@ -454,7 +455,7 @@ static int uli526x_open(struct DEVICE *dev) db->cr6_data |= ULI526X_TXTH_256; db->cr0_data = CR0_DEFAULT; - /* Initilize ULI526X board */ + /* Initialize ULI526X board */ uli526x_init(dev); /* Active System Interface */ @@ -471,14 +472,14 @@ static int uli526x_open(struct DEVICE *dev) } -/* Initilize ULI526X board +/* Initialize ULI526X board * Reset ULI526X board - * Initilize TX/Rx descriptor chain structure + * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ -static void uli526x_init(struct DEVICE *dev) +static void uli526x_init(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = db->ioaddr; @@ -510,11 +511,6 @@ static void uli526x_init(struct DEVICE *dev) /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; - //add by clearzhang 2004/7/8 - /* RESET Phyxcer Chip by GPR port bit 7 */ - //outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ - //outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ - /* Phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); @@ -528,7 +524,7 @@ static void uli526x_init(struct DEVICE *dev) if ( !(db->media_mode & ULI526X_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive decriptor and CR3/4 */ uli526x_descriptor_init(db, ioaddr); /* Init CR6 to program M526X operation */ @@ -555,7 +551,7 @@ static void uli526x_init(struct DEVICE *dev) * Send a packet to media from the upper layer. */ -static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) +static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); struct tx_desc *txptr; @@ -621,7 +617,7 @@ static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev) * The interface is stopped when it is brought. */ -static int uli526x_stop(struct DEVICE *dev) +static int uli526x_stop(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = dev->base_addr; @@ -665,19 +661,16 @@ static int uli526x_stop(struct DEVICE *dev) static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - struct DEVICE *dev = dev_id; + struct net_device *dev = dev_id; struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = dev->base_addr; unsigned long flags; - //ULI526X_DBUG(0, "uli526x_interrupt()", 0); - if (!dev) { ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0); return IRQ_NONE; } - //outl(0, ioaddr + DCR7); spin_lock_irqsave(&db->lock, flags); outl(0, ioaddr + DCR7); @@ -690,9 +683,6 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs return IRQ_HANDLED; } - /* Disable all interrupt in CR7 to solve the interrupt edge problem */ - //outl(0, ioaddr + DCR7); - /* Check system status */ if (db->cr5_data & 0x2000) { /* system bus error happen */ @@ -727,10 +717,9 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs * Free TX resource after TX complete */ -static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * db) +static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db) { struct tx_desc *txptr; -// unsigned long ioaddr = dev->base_addr; u32 tdes0; txptr = db->tx_remove_ptr; @@ -787,7 +776,7 @@ static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * * Receive the come packet and pass to upper layer */ -static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db) +static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db) { struct rx_desc *rxptr; struct sk_buff *skb; @@ -871,7 +860,7 @@ static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db * Get statistics from driver. */ -static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) +static struct net_device_stats * uli526x_get_stats(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); @@ -884,7 +873,7 @@ static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev) * Set ULI526X multicast address */ -static void uli526x_set_filter_mode(struct DEVICE * dev) +static void uli526x_set_filter_mode(struct net_device * dev) { struct uli526x_board_info *db = dev->priv; unsigned long flags; @@ -916,34 +905,26 @@ static void uli526x_set_filter_mode(struct DEVICE * dev) static void ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) { - //struct e1000_hw *hw = &adapter->hw; - - { - - ecmd->supported = (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_MII); + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_MII); - ecmd->advertising = (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_Autoneg | - ADVERTISED_MII); + ecmd->advertising = (ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_MII); - ecmd->port = PORT_MII; - ecmd->phy_address = db->phy_addr; + ecmd->port = PORT_MII; + ecmd->phy_address = db->phy_addr; - ecmd->transceiver = XCVR_EXTERNAL; + ecmd->transceiver = XCVR_EXTERNAL; - - } - - ecmd->speed = 10; ecmd->duplex = DUPLEX_HALF; @@ -965,8 +946,6 @@ ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd) { ecmd->autoneg = AUTONEG_ENABLE; } - - } static void netdev_get_drvinfo(struct net_device *dev, @@ -1022,7 +1001,7 @@ static void uli526x_timer(unsigned long data) { u32 tmp_cr8; unsigned char tmp_cr12=0; - struct DEVICE *dev = (struct DEVICE *) data; + struct net_device *dev = (struct net_device *) data; struct uli526x_board_info *db = netdev_priv(dev); unsigned long flags; u8 TmpSpeed=10; @@ -1135,10 +1114,10 @@ static void uli526x_timer(unsigned long data) * Stop ULI526X board * Free Tx/Rx allocated memory * Reset ULI526X board - * Re-initilize ULI526X board + * Re-initialize ULI526X board */ -static void uli526x_dynamic_reset(struct DEVICE *dev) +static void uli526x_dynamic_reset(struct net_device *dev) { struct uli526x_board_info *db = netdev_priv(dev); @@ -1163,7 +1142,7 @@ static void uli526x_dynamic_reset(struct DEVICE *dev) db->init=1; db->wait_reset = 0; - /* Re-initilize ULI526X board */ + /* Re-initialize ULI526X board */ uli526x_init(dev); /* Restart upper layer interface */ @@ -1273,7 +1252,7 @@ static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long /* * Update CR6 value - * Firstly stop ULI526X , then written value and start + * Firstly stop ULI526X, then written value and start */ static void update_cr6(u32 cr6_data, unsigned long ioaddr) @@ -1286,10 +1265,10 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr) /* * Send a setup frame for M5261/M5263 - * This setup frame initilize ULI526X address filter mode + * This setup frame initialize ULI526X address filter mode */ -static void send_filter_frame(struct DEVICE *dev, int mc_cnt) +static void send_filter_frame(struct net_device *dev, int mc_cnt) { struct uli526x_board_info *db = netdev_priv(dev); struct dev_mc_list *mcptr; @@ -1718,7 +1697,7 @@ MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8 /* Description: * when user used insmod to add module, system invoked init_module() - * to initilize and register. + * to register the services. */ static int __init uli526x_init_module(void) -- cgit v1.2.3-70-g09d2 From 136df52d532af9c19e5cd0e43a54ea4ee2d934fc Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:05:41 -0700 Subject: [PATCH] e100: Do not check Rx packet length against mtu Do not check Rx packet length against mtu - patch from Darren Tucker Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index d0fa2448761..bff13545792 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1539,7 +1539,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Don't indicate if hardware indicates errors */ nic->net_stats.rx_dropped++; dev_kfree_skb_any(skb); - } else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) { + } else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) { /* Don't indicate oversized frames */ nic->rx_over_length_errors++; nic->net_stats.rx_dropped++; -- cgit v1.2.3-70-g09d2 From a074fb860846937a4a46dbbf439cbbb2e2ba960c Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:05:57 -0700 Subject: [PATCH] e100: added msleep_interruptible delay added msleep_interruptible delay right before returning from diag_test Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index bff13545792..b723f4dca11 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2108,6 +2108,8 @@ static void e100_diag_test(struct net_device *netdev, } for(i = 0; i < E100_TEST_LEN; i++) test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0; + + msleep_interruptible(4 * 1000); } static int e100_phys_id(struct net_device *netdev, u32 data) -- cgit v1.2.3-70-g09d2 From 996ec3533ae15424e339089a8045ca1c998f8a87 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:08 -0700 Subject: [PATCH] e100: fixed endian bug in xmit_prepare routine Fixed endian bug associated with cb_i bit in xmit_prepare Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index b723f4dca11..e0fcac889a5 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1307,7 +1307,8 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, { cb->command = nic->tx_command; /* interrupt every 16 packets regardless of delay */ - if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; + if((nic->cbs_avail & ~15) == nic->cbs_avail) + cb->command |= cpu_to_le16(cb_i); cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; -- cgit v1.2.3-70-g09d2 From e6280f26b43775d8fa0c54e50c92491cfccbf738 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:23 -0700 Subject: [PATCH] e100: Increased delay loop for command blocks Increased delay loop for command blocks Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index e0fcac889a5..09448ec48a7 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) } #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ +#define E100_WAIT_SCB_FAST 20 /* delay like the old code */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) if(likely(!readb(&nic->csr->scb.cmd_lo))) break; cpu_relax(); - if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1))) + if(unlikely(i > E100_WAIT_SCB_FAST)) udelay(5); } if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) { -- cgit v1.2.3-70-g09d2 From 685fac63f5ca6c5ca06bab641e1a32bbf9287e89 Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:34 -0700 Subject: [PATCH] e100: CPU cycle saver microcode Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 206 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 09448ec48a7..7e303744dd5 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1007,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } +/********************************************************/ +/* Micro code for 8086:1229 Rev 8 */ +/********************************************************/ + +/* Parameter values for the D101M B-step */ +#define D101M_CPUSAVER_TIMER_DWORD 78 +#define D101M_CPUSAVER_BUNDLE_DWORD 65 +#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 + +#define D101M_B_RCVBUNDLE_UCODE \ +{\ +0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ +0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ +0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ +0x00380438, 0x00000000, 0x00140000, 0x00380555, \ +0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ +0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ +0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ +0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ +0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ +0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ +0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ +0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ +0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ +0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ +0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ +0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ +0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ +0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ +0x00380559, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ +0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ +0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ +} + +/********************************************************/ +/* Micro code for 8086:1229 Rev 9 */ +/********************************************************/ + +/* Parameter values for the D101S */ +#define D101S_CPUSAVER_TIMER_DWORD 78 +#define D101S_CPUSAVER_BUNDLE_DWORD 67 +#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 + +#define D101S_RCVBUNDLE_UCODE \ +{\ +0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ +0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ +0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ +0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ +0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ +0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ +0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ +0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ +0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ +0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ +0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ +0x00101313, 0x00380700, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ +0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ +0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ +0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ +0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ +0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ +0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ +0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ +0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00130831, \ +0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ +0x00041000, 0x00010004, 0x00380700 \ +} + +/********************************************************/ +/* Micro code for the 8086:1229 Rev F/10 */ +/********************************************************/ + +/* Parameter values for the D102 E-step */ +#define D102_E_CPUSAVER_TIMER_DWORD 42 +#define D102_E_CPUSAVER_BUNDLE_DWORD 54 +#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 + +#define D102_E_RCVBUNDLE_UCODE \ +{\ +0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ +0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ +0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ +0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ +0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ +0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ +0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +} + static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { - int i; - static const u32 ucode[UCODE_SIZE] = { - /* NFS packets are misinterpreted as TCO packets and - * incorrectly routed to the BMC over SMBus. This - * microcode patch checks the fragmented IP bit in the - * NFS/UDP header to distinguish between NFS and TCO. */ - 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, - 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, - 0x00906EFD, 0x00900EFD, 0x00E00EF8, - }; +/* *INDENT-OFF* */ + static struct { + u32 ucode[UCODE_SIZE + 1]; + u8 mac; + u8 timer_dword; + u8 bundle_dword; + u8 min_size_dword; + } ucode_opts[] = { + { D101M_B_RCVBUNDLE_UCODE, + mac_82559_D101M, + D101M_CPUSAVER_TIMER_DWORD, + D101M_CPUSAVER_BUNDLE_DWORD, + D101M_CPUSAVER_MIN_SIZE_DWORD }, + { D101S_RCVBUNDLE_UCODE, + mac_82559_D101S, + D101S_CPUSAVER_TIMER_DWORD, + D101S_CPUSAVER_BUNDLE_DWORD, + D101S_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_F, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_10, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { {0}, 0, 0, 0, 0} + }, *opts; +/* *INDENT-ON* */ + +#define BUNDLESMALL 1 +#define BUNDLEMAX 50 +#define INTDELAY 15000 + + opts = ucode_opts; + + /* do not load u-code for ICH devices */ + if (nic->flags & ich) + return; + + /* Search for ucode match against h/w rev_id */ + while (opts->mac) { + if (nic->mac == opts->mac) { + int i; + u32 *ucode = opts->ucode; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= + (u16) INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= + (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for(i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + return; + } + opts++; + } - if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - } else - cb->command = cpu_to_le16(cb_nop); + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, -- cgit v1.2.3-70-g09d2 From 611494dccacb3e42f55359df74d604b67312598b Mon Sep 17 00:00:00 2001 From: Malli Chilakala Date: Thu, 25 Aug 2005 13:06:52 -0700 Subject: [PATCH] e100: Driver version, white space, comments & other Driver version, white space, comments & other Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 7e303744dd5..25cc20e415d 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.8-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -1504,7 +1504,7 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - // check for mapping failure? + /* check for mapping failure? */ cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1896,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget) static void e100_netpoll(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + e100_disable_irq(nic); e100_intr(nic->pdev->irq, netdev, NULL); e100_tx_clean(nic); -- cgit v1.2.3-70-g09d2 From 3690b6c124fbc7259634f3b80d92a6d9fe51ec79 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 26 Aug 2005 00:30:37 +0200 Subject: [PATCH] sis190: complete the mii probe before registering the netdevice The userspace must not be able to issue ethtool command and manage the mii before it is completely initialized. Avoid some pesky "eth%d" messages. Signed-off-by: Arnaud Patard Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 915ff009c29..bf3440aa6c2 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1271,7 +1271,7 @@ static u16 sis190_default_phy(struct net_device *dev) mii_if->phy_id = phy_default->phy_id; net_probe(tp, KERN_INFO "%s: Using transceiver at address %d as default.\n", - dev->name, mii_if->phy_id); + pci_name(tp->pci_dev), mii_if->phy_id); } status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR); @@ -1312,8 +1312,8 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp, phy->type = UNKNOWN; net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n", - dev->name, (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, - phy_id); + pci_name(tp->pci_dev), + (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id); } /** @@ -1358,7 +1358,7 @@ static int __devinit sis190_mii_probe(struct net_device *dev) if (list_empty(&tp->first_phy)) { net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n", - dev->name); + pci_name(tp->pci_dev)); rc = -EIO; goto out; } @@ -1780,15 +1780,16 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, dev->base_addr = (unsigned long) 0xdead; spin_lock_init(&tp->lock); - rc = register_netdev(dev); + + rc = sis190_mii_probe(dev); if (rc < 0) goto err_release_board; - pci_set_drvdata(pdev, dev); - - rc = sis190_mii_probe(dev); + rc = register_netdev(dev); if (rc < 0) - goto err_unregister_dev; + goto err_remove_mii; + + pci_set_drvdata(pdev, dev); net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), " "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", @@ -1804,8 +1805,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev, out: return rc; -err_unregister_dev: - unregister_netdev(dev); +err_remove_mii: + sis190_mii_remove(dev); err_release_board: sis190_release_board(pdev); goto out; -- cgit v1.2.3-70-g09d2