From 485ae77dc7f484563707557ccf8c5d228980619f Mon Sep 17 00:00:00 2001 From: Sven Anders Date: Thu, 24 Aug 2006 17:11:50 +0200 Subject: [WATCHDOG] Winbond SMsC37B787 watchdog driver New watchdog driver for the Winbond SMsC37B787 chipset. Signed-off-by: Sven Anders Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 20 ++ drivers/char/watchdog/Makefile | 1 + drivers/char/watchdog/smsc37b787_wdt.c | 614 +++++++++++++++++++++++++++++++++ 3 files changed, 635 insertions(+) create mode 100644 drivers/char/watchdog/smsc37b787_wdt.c (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 89e46d6dfc4..8d2ebc73c89 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -395,6 +395,26 @@ config CPU5_WDT To compile this driver as a module, choose M here: the module will be called cpu5wdt. +config SMSC37B787_WDT + tristate "Winbond SMsC37B787 Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog component on the + Winbond SMsC37B787 chipset as used on the NetRunner Mainboard + from Vision Systems and maybe others. + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + Usually a userspace daemon will notify the kernel WDT driver that + userspace is still alive, at regular intervals. + + To compile this driver as a module, choose M here: the + module will be called smsc37b787_wdt. + + Most people will say N. + config W83627HF_WDT tristate "W83627HF Watchdog Timer" depends on WATCHDOG && X86 diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 7f70abad465..630526f1237 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o +obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c new file mode 100644 index 00000000000..47141c0b6f2 --- /dev/null +++ b/drivers/char/watchdog/smsc37b787_wdt.c @@ -0,0 +1,614 @@ +/* + * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x + * + * Based on acquirewdt.c by Alan Cox + * and some other existing drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (C) Copyright 2003-2006 Sven Anders + * + * History: + * 2003 - Created version 1.0 for Linux 2.4.x. + * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE + * features. Released version 1.1 + * + * Theory of operation: + * + * A Watchdog Timer (WDT) is a hardware circuit that can + * reset the computer system in case of a software fault. + * You probably knew that already. + * + * Usually a userspace daemon will notify the kernel WDT driver + * via the /dev/watchdog special device file that userspace is + * still alive, at regular intervals. When such a notification + * occurs, the driver will usually tell the hardware watchdog + * that everything is in order, and that the watchdog should wait + * for yet another little while to reset the system. + * If userspace fails (RAM error, kernel bug, whatever), the + * notifications cease to occur, and the hardware watchdog will + * reset the system (causing a reboot) after the timeout occurs. + * + * Create device with: + * mknod /dev/watchdog c 10 130 + * + * For an example userspace keep-alive daemon, see: + * Documentation/watchdog/watchdog.txt + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* enable support for minutes as units? */ +/* (does not always work correctly, so disabled by default!) */ +#define SMSC_SUPPORT_MINUTES +#undef SMSC_SUPPORT_MINUTES + +#define MAX_TIMEOUT 255 + +#define UNIT_SECOND 0 +#define UNIT_MINUTE 1 + +#define MODNAME "smsc37b787_wdt: " +#define VERSION "1.1" + +#define WATCHDOG_MINOR 130 + +#define IOPORT 0x3F0 +#define IOPORT_SIZE 2 +#define IODEV_NO 8 + +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static int timer_enabled = 0; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static int nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* unlock the IO chip */ + +static inline void open_io_config(void) +{ + outb(0x55, IOPORT); + mdelay(1); + outb(0x55, IOPORT); +} + +/* lock the IO chip */ +static inline void close_io_config(void) +{ + outb(0xAA, IOPORT); +} + +/* select the IO device */ +static inline void select_io_device(unsigned char devno) +{ + outb(0x07, IOPORT); + outb(devno, IOPORT+1); +} + +/* write to the control register */ +static inline void write_io_cr(unsigned char reg, unsigned char data) +{ + outb(reg, IOPORT); + outb(data, IOPORT+1); +} + +/* read from the control register */ +static inline char read_io_cr(unsigned char reg) +{ + outb(reg, IOPORT); + return inb(IOPORT+1); +} + +/* -- Medium level functions ------------------------------------*/ + +static inline void gpio_bit12(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.2 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + // 11 = Either Edge Triggered Intr. 2 + // Bit 5/6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE2, reg); +} + +static inline void gpio_bit13(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.3 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3, Function select: 0 = GPI/O, 1 = LED + // Bit 4-6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE3, reg); +} + +static inline void wdt_timer_units(unsigned char new_units) +{ + // -- Watchdog timer units -- + // Bit 0-6 (Reserved) + // Bit 7, WDT Time-out Value Units Select + // (0 = Minutes, 1 = Seconds) + write_io_cr(0xF1, new_units); +} + +static inline void wdt_timeout_value(unsigned char new_timeout) +{ + // -- Watchdog Timer Time-out Value -- + // Bit 0-7 Binary coded units (0=Disabled, 1..255) + write_io_cr(0xF2, new_timeout); +} + +static inline void wdt_timer_conf(unsigned char conf) +{ + // -- Watchdog timer configuration -- + // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O + // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr. + // Bit 3 Reset the timer + // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled) + // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + write_io_cr(0xF3, conf); +} + +static inline void wdt_timer_ctrl(unsigned char reg) +{ + // -- Watchdog timer control -- + // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + // Bit 3 P20 Force Timeout enabled: + // 0 = P20 activity does not generate the WD timeout event + // 1 = P20 Allows rising edge of P20, from the keyboard + // controller, to force the WD timeout event. + // Bit 4 (Reserved) + // -- Soft power management -- + // Bit 5 Stop Counter: 1 = Stop software power down counter + // set via register 0xB8, (self-cleaning) + // (Upon read: 0 = Counter running, 1 = Counter stopped) + // Bit 6 Restart Counter: 1 = Restart software power down counter + // set via register 0xB8, (self-cleaning) + // Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + + write_io_cr(0xF4, reg); +} + +/* -- Higher level functions ------------------------------------*/ + +/* initialize watchdog */ + +static void wb_smsc_wdt_initialize(void) +{ + unsigned char old; + + open_io_config(); + select_io_device(IODEV_NO); + + // enable the watchdog + gpio_bit13(0x08); // Select pin 80 = LED not GPIO + gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert + + // disable the timeout + wdt_timeout_value(0); + + // reset control register + wdt_timer_ctrl(0x00); + + // reset configuration register + wdt_timer_conf(0x00); + + // read old (timer units) register + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) old |= 0x80; // set to seconds + + // set the watchdog timer units + wdt_timer_units(old); + + close_io_config(); +} + +/* shutdown the watchdog */ + +static void wb_smsc_wdt_shutdown(void) +{ + open_io_config(); + select_io_device(IODEV_NO); + + // disable the watchdog + gpio_bit13(0x09); + gpio_bit12(0x09); + + // reset watchdog config register + wdt_timer_conf(0x00); + + // reset watchdog control register + wdt_timer_ctrl(0x00); + + // disable timeout + wdt_timeout_value(0x00); + + close_io_config(); +} + +/* set timeout => enable watchdog */ + +static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) +{ + open_io_config(); + select_io_device(IODEV_NO); + + // set Power LED to blink, if we enable the timeout + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + + // set timeout value + wdt_timeout_value(new_timeout); + + close_io_config(); +} + +/* get timeout */ + +static unsigned char wb_smsc_wdt_get_timeout(void) +{ + unsigned char set_timeout; + + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); + + return set_timeout; +} + +/* disable watchdog */ + +static void wb_smsc_wdt_disable(void) +{ + // set the timeout to 0 to disable the watchdog + wb_smsc_wdt_set_timeout(0); +} + +/* enable watchdog by setting the current timeout */ + +static void wb_smsc_wdt_enable(void) +{ + // set the current timeout... + wb_smsc_wdt_set_timeout(timeout); +} + +/* reset the timer */ + +static void wb_smsc_wdt_reset_timer(void) +{ + open_io_config(); + select_io_device(IODEV_NO); + + // reset the timer + wdt_timeout_value(timeout); + wdt_timer_conf(0x08); + + close_io_config(); +} + +/* return, if the watchdog is enabled (timeout is set...) */ + +static int wb_smsc_wdt_status(void) +{ + return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING; +} + + +/* -- File operations -------------------------------------------*/ + +/* open => enable watchdog and set initial timeout */ + +static int wb_smsc_wdt_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (timer_enabled) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + timer_enabled = 1; + wb_smsc_wdt_enable(); + + printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + + return nonseekable_open(inode, file); +} + +/* close => shut off the timer */ + +static int wb_smsc_wdt_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + wb_smsc_wdt_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n"); + } else { + printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n"); + wb_smsc_wdt_reset_timer(); + } + + timer_enabled = 0; + expect_close = 0; + return 0; +} + +/* write => update the timer to keep the machine alive */ + +static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + wb_smsc_wdt_reset_timer(); + } + return len; +} + +/* ioctl => control interface */ + +static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "SMsC 37B787 Watchdog" + }; + + uarg.i = (int __user *)arg; + + switch (cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, sizeof(ident)); + + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + // the API states this is given in secs + if (unit == UNIT_MINUTE) + new_timeout /= 60; + + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + + // fall through and return the new timeout... + + case WDIOC_GETTIMEOUT: + + new_timeout = timeout; + + if (unit == UNIT_MINUTE) + new_timeout *= 60; + + return put_user(new_timeout, uarg.i); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + + return retval; + } + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + { + // set timeout to 0, to avoid possible race-condition + timeout = 0; + wb_smsc_wdt_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static struct file_operations wb_smsc_wdt_fops = +{ + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wb_smsc_wdt_write, + .ioctl = wb_smsc_wdt_ioctl, + .open = wb_smsc_wdt_open, + .release = wb_smsc_wdt_release +}; + +static struct notifier_block wb_smsc_wdt_notifier = +{ + .notifier_call = wb_smsc_wdt_notify_sys +}; + +static struct miscdevice wb_smsc_wdt_miscdev = +{ + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wb_smsc_wdt_fops, +}; + +/* -- Module init functions -------------------------------------*/ + +/* module's "constructor" */ + +static int __init wb_smsc_wdt_init(void) +{ + int ret; + + printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); + + if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { + printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT); + ret = -EBUSY; + goto out_pnp; + } + + ret = register_reboot_notifier(&wb_smsc_wdt_notifier); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); + goto out_io; + } + + ret = misc_register(&wb_smsc_wdt_miscdev); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + goto out_rbt; + } + + // init the watchdog timer + wb_smsc_wdt_initialize(); + + // set new maximum, if it's too big + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + // output info + printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); + + // ret = 0 + +out_clean: + return ret; + +out_rbt: + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + +out_io: + release_region(IOPORT, IOPORT_SIZE); + +out_pnp: + goto out_clean; +} + +/* module's "destructor" */ + +static void __exit wb_smsc_wdt_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) + { + wb_smsc_wdt_shutdown(); + printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + } + + misc_deregister(&wb_smsc_wdt_miscdev); + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + release_region(IOPORT, IOPORT_SIZE); + + printk("SMsC 37B787 watchdog component driver removed.\n"); +} + +module_init(wb_smsc_wdt_init); +module_exit(wb_smsc_wdt_exit); + +MODULE_AUTHOR("Sven Anders "); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +#ifdef SMSC_SUPPORT_MINUTES +module_param(unit, int, 0); +MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); +#endif + +module_param(timeout, int, 60); +MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); -- cgit v1.2.3-70-g09d2 From 8386c8cfb2131b2a9caae3db6bf94292bbbe1caf Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 2 Sep 2006 19:32:26 +0200 Subject: [WATCHDOG] Winbond SMsC37B787 - remove trailing whitespace Remove trailing whitespace. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/smsc37b787_wdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c index 47141c0b6f2..1d01b3074db 100644 --- a/drivers/char/watchdog/smsc37b787_wdt.c +++ b/drivers/char/watchdog/smsc37b787_wdt.c @@ -8,7 +8,7 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * + * * The authors do NOT admit liability nor provide warranty for * any of this software. This material is provided "AS-IS" in * the hope that it may be useful for others. @@ -422,7 +422,7 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, switch (cmd) { default: - return -ENOTTY; + return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(uarg.ident, &ident, sizeof(ident)); @@ -573,7 +573,7 @@ out_io: out_pnp: goto out_clean; -} +} /* module's "destructor" */ -- cgit v1.2.3-70-g09d2 From aa1fd4d7c3b131026bf156da40fdf94bcbd705aa Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 2 Sep 2006 20:53:19 +0200 Subject: [WATCHDOG] Winbond SMsC37B787 watchdog fixes * Added io spinlocking * Deleted WATCHDOG_MINOR (it's in the miscdevice include * Changed timer_enabled to use set_bit functions * WDIOC_GETSUPPORT should return -EFAULT or 0 * timeout should be correct before we initialize the watchdog * we should initialize the watchdog before we give access to userspace * Third parameter of module_param is not the default or initial value Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/smsc37b787_wdt.c | 47 ++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c index 1d01b3074db..9f56913b484 100644 --- a/drivers/char/watchdog/smsc37b787_wdt.c +++ b/drivers/char/watchdog/smsc37b787_wdt.c @@ -54,6 +54,7 @@ #include #include #include +#include #include #include @@ -72,18 +73,18 @@ #define MODNAME "smsc37b787_wdt: " #define VERSION "1.1" -#define WATCHDOG_MINOR 130 - #define IOPORT 0x3F0 #define IOPORT_SIZE 2 #define IODEV_NO 8 static int unit = UNIT_SECOND; /* timer's unit */ static int timeout = 60; /* timeout value: default is 60 "units" */ -static int timer_enabled = 0; /* is the timer enabled? */ +static unsigned long timer_enabled = 0; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ +static spinlock_t io_lock; /* to guard the watchdog from io races */ + static int nowayout = WATCHDOG_NOWAYOUT; /* -- Low level function ----------------------------------------*/ @@ -210,6 +211,7 @@ static void wb_smsc_wdt_initialize(void) { unsigned char old; + spin_lock(&io_lock); open_io_config(); select_io_device(IODEV_NO); @@ -234,12 +236,14 @@ static void wb_smsc_wdt_initialize(void) wdt_timer_units(old); close_io_config(); + spin_unlock(&io_lock); } /* shutdown the watchdog */ static void wb_smsc_wdt_shutdown(void) { + spin_lock(&io_lock); open_io_config(); select_io_device(IODEV_NO); @@ -257,12 +261,14 @@ static void wb_smsc_wdt_shutdown(void) wdt_timeout_value(0x00); close_io_config(); + spin_unlock(&io_lock); } /* set timeout => enable watchdog */ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) { + spin_lock(&io_lock); open_io_config(); select_io_device(IODEV_NO); @@ -273,6 +279,7 @@ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) wdt_timeout_value(new_timeout); close_io_config(); + spin_unlock(&io_lock); } /* get timeout */ @@ -281,10 +288,12 @@ static unsigned char wb_smsc_wdt_get_timeout(void) { unsigned char set_timeout; + spin_lock(&io_lock); open_io_config(); select_io_device(IODEV_NO); set_timeout = read_io_cr(0xF2); close_io_config(); + spin_unlock(&io_lock); return set_timeout; } @@ -309,6 +318,7 @@ static void wb_smsc_wdt_enable(void) static void wb_smsc_wdt_reset_timer(void) { + spin_lock(&io_lock); open_io_config(); select_io_device(IODEV_NO); @@ -317,6 +327,7 @@ static void wb_smsc_wdt_reset_timer(void) wdt_timer_conf(0x08); close_io_config(); + spin_unlock(&io_lock); } /* return, if the watchdog is enabled (timeout is set...) */ @@ -335,14 +346,13 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ - if (timer_enabled) + if (test_and_set_bit(0, &timer_enabled)) return -EBUSY; if (nowayout) __module_get(THIS_MODULE); /* Reload and activate timer */ - timer_enabled = 1; wb_smsc_wdt_enable(); printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); @@ -364,7 +374,7 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file) wb_smsc_wdt_reset_timer(); } - timer_enabled = 0; + clear_bit(0, &timer_enabled); expect_close = 0; return 0; } @@ -425,7 +435,8 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, return -ENOTTY; case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, sizeof(ident)); + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: return put_user(wb_smsc_wdt_status(), uarg.i); @@ -506,12 +517,12 @@ static struct file_operations wb_smsc_wdt_fops = .write = wb_smsc_wdt_write, .ioctl = wb_smsc_wdt_ioctl, .open = wb_smsc_wdt_open, - .release = wb_smsc_wdt_release + .release = wb_smsc_wdt_release, }; static struct notifier_block wb_smsc_wdt_notifier = { - .notifier_call = wb_smsc_wdt_notify_sys + .notifier_call = wb_smsc_wdt_notify_sys, }; static struct miscdevice wb_smsc_wdt_miscdev = @@ -529,6 +540,8 @@ static int __init wb_smsc_wdt_init(void) { int ret; + spin_lock_init(&io_lock); + printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { @@ -537,6 +550,13 @@ static int __init wb_smsc_wdt_init(void) goto out_pnp; } + // set new maximum, if it's too big + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + // init the watchdog timer + wb_smsc_wdt_initialize(); + ret = register_reboot_notifier(&wb_smsc_wdt_notifier); if (ret) { printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); @@ -549,13 +569,6 @@ static int __init wb_smsc_wdt_init(void) goto out_rbt; } - // init the watchdog timer - wb_smsc_wdt_initialize(); - - // set new maximum, if it's too big - if (timeout > MAX_TIMEOUT) - timeout = MAX_TIMEOUT; - // output info printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); @@ -607,7 +620,7 @@ module_param(unit, int, 0); MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); #endif -module_param(timeout, int, 60); +module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); module_param(nowayout, int, 0); -- cgit v1.2.3-70-g09d2 From f9a8c8913a95aed91bfa81f7d4043c6430423bf8 Mon Sep 17 00:00:00 2001 From: Marcus Junker Date: Thu, 24 Aug 2006 17:11:50 +0200 Subject: [WATCHDOG] w83697hf WDT driver New watchdog driver for the Winbond W83697HF chipset. Signed-off-by: Marcus Junker Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 13 ++ drivers/char/watchdog/Makefile | 1 + drivers/char/watchdog/w83697hf_wdt.c | 367 +++++++++++++++++++++++++++++++++++ 3 files changed, 381 insertions(+) create mode 100644 drivers/char/watchdog/w83697hf_wdt.c (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 8d2ebc73c89..3e67e01b073 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -430,6 +430,19 @@ config W83627HF_WDT Most people will say N. +config W83697HF_WDT + tristate "W83697HF Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the W83697HF chipset + This watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of time. + + To compile this driver as a module, choose M here: the + module will be called w83697hf_wdt. + + Most people will say N. + config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" depends on WATCHDOG && X86 diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 630526f1237..ee3474190e2 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o +obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o obj-$(CONFIG_MACHZ_WDT) += machzwd.o diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c new file mode 100644 index 00000000000..ef6612e1b91 --- /dev/null +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -0,0 +1,367 @@ +/* + * w83697hf WDT driver + * + * (c) Copyright 2006 Marcus Junker + * + * Based on w83627hf_wdt.c advantechwdt.c which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 2003 Pádraig Brady + * + * (c) Copyright 2000-2001 Marek Michalkiewicz + * + * (c) Copyright 1996 Alan Cox , All Rights Reserved. + * http://www.redhat.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Marcus Junker nor ANDURAS AG admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define WATCHDOG_NAME "w83697hf WDT" +#define PFX WATCHDOG_NAME ": " +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +static unsigned long wdt_is_open; +static char expect_close; + +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_io = 0x2E; +module_param(wdt_io, int, 0); +MODULE_PARM_DESC(wdt_io, "w83697hf WDT io port (default 0x2E)"); + +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +/* + * Kernel methods. + */ + +#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ +#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ + +static void +w83697hf_select_wd_register(void) +{ + outb_p(0x87, WDT_EFER); /* Enter extended function mode */ + outb_p(0x87, WDT_EFER); /* Again according to manual */ + + outb_p(0x29, WDT_EFER); /* select CR29 */ + outb_p(0x20, WDT_EFDR); /* select WDTO */ + + outb_p(0x07, WDT_EFER); /* point to logical device number reg */ + outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */ + outb_p(0x30, WDT_EFER); /* select CR30 */ + outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */ +} + +static void +w83697hf_unselect_wd_register(void) +{ + outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ +} + +/* tyan motherboards seem to set F5 to 0x4C ? + * So explicitly init to appropriate value. */ +static void +w83697hf_init(void) +{ + unsigned char t; + + w83697hf_select_wd_register(); + + outb_p(0xF3, WDT_EFER); /* Select CRF3 */ + + t=inb_p(WDT_EFDR); /* read CRF6 */ + if (t != 0) { + printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); + outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ + } + outb_p(0xF4, WDT_EFER); /* Select CRF4 */ + t=inb_p(WDT_EFDR); /* read CRF4 */ + t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ + outb_p(t, WDT_EFDR); /* Write back to CRF5 */ + + w83697hf_unselect_wd_register(); +} + +static void +wdt_ctrl(int timeout) +{ + w83697hf_select_wd_register(); + + outb_p(0xF4, WDT_EFER); /* Select CRF4 */ + outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */ + + w83697hf_unselect_wd_register(); +} + +static int +wdt_ping(void) +{ + wdt_ctrl(timeout); + return 0; +} + +static int +wdt_disable(void) +{ + wdt_ctrl(0); + return 0; +} + +static int +wdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 63)) + return -EINVAL; + + timeout = t; + return 0; +} + +static ssize_t +wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + wdt_ping(); + } + return count; +} + +static int +wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_timeout; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "W83697HF WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_ping(); + retval = 0; + } + + return retval; + } + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int +wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + + wdt_ping(); + return nonseekable_open(inode, file); +} + +static int +wdt_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + wdt_disable(); + } else { + printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + wdt_ping(); + } + expect_close = 0; + clear_bit(0, &wdt_is_open); + return 0; +} + +/* + * Notifier for system down + */ + +static int +wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) { + /* Turn the WDT off */ + wdt_disable(); + } + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_close, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static int __init +wdt_init(void) +{ + int ret; + + printk(KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n"); + + if (wdt_set_heartbeat(timeout)) { + wdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk (KERN_INFO PFX "timeout value must be 1<=timeout<=63, using %d\n", + WATCHDOG_TIMEOUT); + } + + if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { + printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + wdt_io); + ret = -EIO; + goto out; + } + + w83697hf_init(); + + ret = register_reboot_notifier(&wdt_notifier); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", + ret); + goto unreg_regions; + } + + ret = misc_register(&wdt_miscdev); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_reboot; + } + + printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + +out: + return ret; +unreg_reboot: + unregister_reboot_notifier(&wdt_notifier); +unreg_regions: + release_region(wdt_io, 1); + goto out; +} + +static void __exit +wdt_exit(void) +{ + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + release_region(wdt_io,1); +} + +module_init(wdt_init); +module_exit(wdt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marcus Junker "); +MODULE_DESCRIPTION("w83697hf WDT driver"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3-70-g09d2 From e0845bf4e1df07e16fa39d96508a1ba4a480ce3e Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 2 Sep 2006 17:59:54 +0200 Subject: [WATCHDOG] Kconfig clean-up * fix typo's according to spellings checker * Fix some leading and trailing spaces Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 3e67e01b073..00b21db8eee 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -13,7 +13,7 @@ config WATCHDOG subsequently opening the file and then failing to write to it for longer than 1 minute will result in rebooting the machine. This could be useful for a networked machine that needs to come back - online as fast as possible after a lock-up. There's both a watchdog + on-line as fast as possible after a lock-up. There's both a watchdog implementation entirely in software (which can sometimes fail to reboot the machine) and a driver for hardware watchdog boards, which are more robust and can also keep track of the temperature inside @@ -71,7 +71,7 @@ config 21285_WATCHDOG tristate "DC21285 watchdog" depends on WATCHDOG && FOOTBRIDGE help - The Intel Footbridge chip contains a builtin watchdog circuit. Say Y + The Intel Footbridge chip contains a built-in watchdog circuit. Say Y here if you wish to use this. Alternatively say M to compile the driver as a module, which will be called wdt285. @@ -273,7 +273,7 @@ config IBMASR depends on WATCHDOG && X86 help This is the driver for the IBM Automatic Server Restart watchdog - timer builtin into some eServer xSeries machines. + timer built-in into some eServer xSeries machines. To compile this driver as a module, choose M here: the module will be called ibmasr. @@ -431,17 +431,17 @@ config W83627HF_WDT Most people will say N. config W83697HF_WDT - tristate "W83697HF Watchdog Timer" - depends on WATCHDOG && X86 - ---help--- - This is the driver for the hardware watchdog on the W83697HF chipset - This watchdog simply watches your kernel to make sure it doesn't freeze, - and if it does, it reboots your computer after a certain amount of time. + tristate "W83697HF Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the W83697HF chipset + This watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of time. - To compile this driver as a module, choose M here: the - module will be called w83697hf_wdt. + To compile this driver as a module, choose M here: the + module will be called w83697hf_wdt. - Most people will say N. + Most people will say N. config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" @@ -476,7 +476,7 @@ config MACHZ_WDT depends on WATCHDOG && X86 ---help--- If you are using a ZF Micro MachZ processor, say Y here, otherwise - N. This is the driver for the watchdog timer builtin on that + N. This is the driver for the watchdog timer built-in on that processor using ZF-Logic interface. This watchdog simply watches your kernel to make sure it doesn't freeze, and if it does, it reboots your computer after a certain amount of time. -- cgit v1.2.3-70-g09d2 From ab9d441425559aa035ba6327f21e8922e8a13927 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 2 Sep 2006 18:50:20 +0200 Subject: [WATCHDOG] w836?7hf_wdt spinlock fixes. Add io spinlocks to prevent possible race conditions between start and stop operations that are issued from different child processes where the master process opened /dev/watchdog. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83627hf_wdt.c | 8 ++++++++ drivers/char/watchdog/w83697hf_wdt.c | 8 ++++++++ 2 files changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c index b4adc527e68..07d4bff2722 100644 --- a/drivers/char/watchdog/w83627hf_wdt.c +++ b/drivers/char/watchdog/w83627hf_wdt.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -44,6 +45,7 @@ static unsigned long wdt_is_open; static char expect_close; +static spinlock_t io_lock; /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2E; @@ -110,12 +112,16 @@ w83627hf_init(void) static void wdt_ctrl(int timeout) { + spin_lock(&io_lock); + w83627hf_select_wd_register(); outb_p(0xF6, WDT_EFER); /* Select CRF6 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */ w83627hf_unselect_wd_register(); + + spin_unlock(&io_lock); } static int @@ -303,6 +309,8 @@ wdt_init(void) { int ret; + spin_lock_init(&io_lock); + printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index ef6612e1b91..21e822e0eee 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -44,6 +45,7 @@ static unsigned long wdt_is_open; static char expect_close; +static spinlock_t io_lock; /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2E; @@ -114,12 +116,16 @@ w83697hf_init(void) static void wdt_ctrl(int timeout) { + spin_lock(&io_lock); + w83697hf_select_wd_register(); outb_p(0xF4, WDT_EFER); /* Select CRF4 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */ w83697hf_unselect_wd_register(); + + spin_unlock(&io_lock); } static int @@ -307,6 +313,8 @@ wdt_init(void) { int ret; + spin_lock_init(&io_lock); + printk(KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { -- cgit v1.2.3-70-g09d2 From c310e2b950c949cfc14754baed877eadb1a26f6b Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 2 Sep 2006 19:04:02 +0200 Subject: [WATCHDOG] Kconfig clean up fixed some more trailing spaces. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 00b21db8eee..ecae59cd767 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -269,9 +269,9 @@ config IB700_WDT Most people will say N. config IBMASR - tristate "IBM Automatic Server Restart" - depends on WATCHDOG && X86 - help + tristate "IBM Automatic Server Restart" + depends on WATCHDOG && X86 + help This is the driver for the IBM Automatic Server Restart watchdog timer built-in into some eServer xSeries machines. @@ -505,7 +505,6 @@ config SBC_EPX_C3_WATCHDOG To compile this driver as a module, choose M here: the module will be called sbc_epx_c3. - # PowerPC Architecture config 8xx_WDT @@ -535,7 +534,7 @@ config WATCHDOG_RTAS help This driver adds watchdog support for the RTAS watchdog. - To compile this driver as a module, choose M here. The module + To compile this driver as a module, choose M here. The module will be called wdrtas. # MIPS Architecture -- cgit v1.2.3-70-g09d2 From 196f29c8e8cd3352d26ed7bdf44f622e14adb931 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 13 Sep 2006 21:27:29 +0200 Subject: [WATCHDOG] use ENOTTY instead of ENOIOCTLCMD in ioctl() Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands. ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck Acked-by: Alan Cox Signed-off-by: Andrew Morton --- drivers/char/watchdog/w83697hf_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 21e822e0eee..32710a97b16 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -233,7 +233,7 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } default: - return -ENOIOCTLCMD; + return -ENOTTY; } return 0; } -- cgit v1.2.3-70-g09d2 From 8de6fc1e2023954ec21d4e84d002839afed4cad3 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 1 This is patch 1 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - the note concerning tyan motherboards has been copied from another driver, This doesn't apply here. - the comments concerning CRF6 are wrong as CRF3 is manipulated and CRF6 is never read nor written. - the comments concerning CRF5 are wrong as CRF4 is manipulated and CRF5 is never read nor written. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 32710a97b16..c31121eab3c 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -89,8 +89,6 @@ w83697hf_unselect_wd_register(void) outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ } -/* tyan motherboards seem to set F5 to 0x4C ? - * So explicitly init to appropriate value. */ static void w83697hf_init(void) { @@ -100,15 +98,15 @@ w83697hf_init(void) outb_p(0xF3, WDT_EFER); /* Select CRF3 */ - t=inb_p(WDT_EFDR); /* read CRF6 */ + t=inb_p(WDT_EFDR); /* read CRF3 */ if (t != 0) { printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); - outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ + outb_p(timeout, WDT_EFDR); /* Write back to CRF3 */ } outb_p(0xF4, WDT_EFER); /* Select CRF4 */ t=inb_p(WDT_EFDR); /* read CRF4 */ t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ - outb_p(t, WDT_EFDR); /* Write back to CRF5 */ + outb_p(t, WDT_EFDR); /* Write back to CRF4 */ w83697hf_unselect_wd_register(); } -- cgit v1.2.3-70-g09d2 From b41a9f59d13a4c4c3f0e0b8d9ff15743607096a2 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 2 This is patch 2 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - wdt_io is 2 bytes long. We should do a request_region for 2 bytes instead of 1. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index c31121eab3c..4f81943fe7f 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -321,7 +321,7 @@ wdt_init(void) WATCHDOG_TIMEOUT); } - if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { + if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_io); ret = -EIO; @@ -352,7 +352,7 @@ out: unreg_reboot: unregister_reboot_notifier(&wdt_notifier); unreg_regions: - release_region(wdt_io, 1); + release_region(wdt_io, 2); goto out; } @@ -361,7 +361,7 @@ wdt_exit(void) { misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(wdt_io,1); + release_region(wdt_io, 2); } module_init(wdt_init); -- cgit v1.2.3-70-g09d2 From db16525e63f8cf554696045e0e360b81e2263279 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 3 This is patch 3 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Fix identation. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 66 ++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 4f81943fe7f..12bdcab17b9 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -6,7 +6,7 @@ * Based on w83627hf_wdt.c advantechwdt.c which is based on wdt.c. * Original copyright messages: * - * (c) Copyright 2003 Pádraig Brady + * (c) Copyright 2003 Pádraig Brady * * (c) Copyright 2000-2001 Marek Michalkiewicz * @@ -96,16 +96,16 @@ w83697hf_init(void) w83697hf_select_wd_register(); - outb_p(0xF3, WDT_EFER); /* Select CRF3 */ + outb_p(0xF3, WDT_EFER); /* Select CRF3 */ t=inb_p(WDT_EFDR); /* read CRF3 */ if (t != 0) { printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); outb_p(timeout, WDT_EFDR); /* Write back to CRF3 */ } - outb_p(0xF4, WDT_EFER); /* Select CRF4 */ - t=inb_p(WDT_EFDR); /* read CRF4 */ - t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ + outb_p(0xF4, WDT_EFER); /* Select CRF4 */ + t=inb_p(WDT_EFDR); /* read CRF4 */ + t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ outb_p(t, WDT_EFDR); /* Write back to CRF4 */ w83697hf_unselect_wd_register(); @@ -187,51 +187,51 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - wdt_ping(); - break; + wdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + return put_user(timeout, p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; + int options, retval = -EINVAL; - if (get_user(options, p)) - return -EFAULT; + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_DISABLECARD) { - wdt_disable(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } - if (options & WDIOS_ENABLECARD) { - wdt_ping(); - retval = 0; - } + if (options & WDIOS_ENABLECARD) { + wdt_ping(); + retval = 0; + } - return retval; + return retval; } default: - return -ENOTTY; + return -ENOTTY; } return 0; } @@ -255,7 +255,7 @@ wdt_close(struct inode *inode, struct file *file) if (expect_close == 42) { wdt_disable(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -313,7 +313,7 @@ wdt_init(void) spin_lock_init(&io_lock); - printk(KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n"); + printk (KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); -- cgit v1.2.3-70-g09d2 From eb64419e397aaea55b2ef6904e86b6263a80acc7 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 4 This is patch 4 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - limits the watchdog timeout to 1-63 while this device accepts 1-255. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 12bdcab17b9..94b1655e70c 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -54,7 +54,7 @@ MODULE_PARM_DESC(wdt_io, "w83697hf WDT io port (default 0x2E)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); @@ -143,7 +143,7 @@ wdt_disable(void) static int wdt_set_heartbeat(int t) { - if ((t < 1) || (t > 63)) + if ((t < 1) || (t > 255)) return -EINVAL; timeout = t; @@ -317,7 +317,7 @@ wdt_init(void) if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=timeout<=63, using %d\n", + printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", WATCHDOG_TIMEOUT); } -- cgit v1.2.3-70-g09d2 From 44d7d3282baa4080b73adca31648e6ef1e191874 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 5 This is patch 5 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Rename the Extended Function Registers to the names used in the data-sheet. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 42 ++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 94b1655e70c..c44f281f356 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -64,29 +64,29 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CON * Kernel methods. */ -#define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ -#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ -#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ +#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */ +#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ static void w83697hf_select_wd_register(void) { - outb_p(0x87, WDT_EFER); /* Enter extended function mode */ - outb_p(0x87, WDT_EFER); /* Again according to manual */ + outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ + outb_p(0x87, W83697HF_EFER); /* Again according to manual */ - outb_p(0x29, WDT_EFER); /* select CR29 */ - outb_p(0x20, WDT_EFDR); /* select WDTO */ + outb_p(0x29, W83697HF_EFER); /* select CR29 */ + outb_p(0x20, W83697HF_EFDR); /* select WDTO */ - outb_p(0x07, WDT_EFER); /* point to logical device number reg */ - outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */ - outb_p(0x30, WDT_EFER); /* select CR30 */ - outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */ + outb_p(0x07, W83697HF_EFER); /* point to logical device number reg */ + outb_p(0x08, W83697HF_EFDR); /* select logical device 8 (GPIO2) */ + outb_p(0x30, W83697HF_EFER); /* select CR30 */ + outb_p(0x01, W83697HF_EFDR); /* set bit 0 to activate GPIO2 */ } static void w83697hf_unselect_wd_register(void) { - outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ + outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ } static void @@ -96,17 +96,17 @@ w83697hf_init(void) w83697hf_select_wd_register(); - outb_p(0xF3, WDT_EFER); /* Select CRF3 */ + outb_p(0xF3, W83697HF_EFER); /* Select CRF3 */ - t=inb_p(WDT_EFDR); /* read CRF3 */ + t=inb_p(W83697HF_EFDR); /* read CRF3 */ if (t != 0) { printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); - outb_p(timeout, WDT_EFDR); /* Write back to CRF3 */ + outb_p(timeout, W83697HF_EFDR); /* Write back to CRF3 */ } - outb_p(0xF4, WDT_EFER); /* Select CRF4 */ - t=inb_p(WDT_EFDR); /* read CRF4 */ - t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ - outb_p(t, WDT_EFDR); /* Write back to CRF4 */ + outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */ + t=inb_p(W83697HF_EFDR); /* read CRF4 */ + t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ + outb_p(t, W83697HF_EFDR); /* Write back to CRF4 */ w83697hf_unselect_wd_register(); } @@ -118,8 +118,8 @@ wdt_ctrl(int timeout) w83697hf_select_wd_register(); - outb_p(0xF4, WDT_EFER); /* Select CRF4 */ - outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF4 */ + outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */ + outb_p(timeout, W83697HF_EFDR); /* Write Timeout counter to CRF4 */ w83697hf_unselect_wd_register(); -- cgit v1.2.3-70-g09d2 From de710d6871c7f569da007f1074710fadf1708c29 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 6 This is patch 6 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - The driver works for both the w83697hf and the w83697hg chipset's. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index c44f281f356..ad397f912bd 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -1,9 +1,10 @@ /* - * w83697hf WDT driver + * w83697hf/hg WDT driver * * (c) Copyright 2006 Marcus Junker * - * Based on w83627hf_wdt.c advantechwdt.c which is based on wdt.c. + * Based on w83627hf_wdt.c which is based on advantechwdt.c + * which is based on wdt.c. * Original copyright messages: * * (c) Copyright 2003 Pádraig Brady @@ -39,7 +40,7 @@ #include #include -#define WATCHDOG_NAME "w83697hf WDT" +#define WATCHDOG_NAME "w83697hf/hg WDT" #define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ @@ -313,7 +314,7 @@ wdt_init(void) spin_lock_init(&io_lock); - printk (KERN_INFO "WDT driver for the Winbond(TM) W83697HF Super I/O chip initialising.\n"); + printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); @@ -369,5 +370,5 @@ module_exit(wdt_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Marcus Junker "); -MODULE_DESCRIPTION("w83697hf WDT driver"); +MODULE_DESCRIPTION("w83697hf/hg WDT driver"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3-70-g09d2 From f7be3328b6e8b09b3a910a93ef569cba162ea81d Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 7 This is patch 7 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - add w83697hf_unlock function to enter the chipsets extended function mode. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index ad397f912bd..b1f22579850 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -69,11 +69,17 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CON #define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ #define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ -static void -w83697hf_select_wd_register(void) +static inline void +w83697hf_unlock(void) { outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ outb_p(0x87, W83697HF_EFER); /* Again according to manual */ +} + +static void +w83697hf_select_wd_register(void) +{ + w83697hf_unlock(); outb_p(0x29, W83697HF_EFER); /* select CR29 */ outb_p(0x20, W83697HF_EFDR); /* select WDTO */ -- cgit v1.2.3-70-g09d2 From fe851ebade80af9b58599c74d61718657b02cfd3 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 8 This is patch 8 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - add w83697hf_lock function to leave the chipsets extended function mode. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index b1f22579850..6a357a818c8 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -76,6 +76,12 @@ w83697hf_unlock(void) outb_p(0x87, W83697HF_EFER); /* Again according to manual */ } +static inline void +w83697hf_lock(void) +{ + outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ +} + static void w83697hf_select_wd_register(void) { @@ -93,7 +99,7 @@ w83697hf_select_wd_register(void) static void w83697hf_unselect_wd_register(void) { - outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ + w83697hf_lock(); } static void -- cgit v1.2.3-70-g09d2 From 0cd544763bacad14d0d15fb16d29999b450cb77f Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 9 This is patch 9 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - add w83697hf_get_reg() and w83697hf_set_reg() functions. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 42 +++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 6a357a818c8..f62f1723871 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -82,18 +82,34 @@ w83697hf_lock(void) outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ } +/* + * The two functions w83697hf_get_reg() and w83697hf_set_reg() + * must be called with the device unlocked. + */ + +static unsigned char +w83697hf_get_reg(unsigned char reg) +{ + outb_p(reg, W83697HF_EFIR); + return inb_p(W83697HF_EFDR); +} + +static void +w83697hf_set_reg(unsigned char reg, unsigned char data) +{ + outb_p(reg, W83697HF_EFIR); + outb_p(data, W83697HF_EFDR); +} + static void w83697hf_select_wd_register(void) { w83697hf_unlock(); - outb_p(0x29, W83697HF_EFER); /* select CR29 */ - outb_p(0x20, W83697HF_EFDR); /* select WDTO */ + w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ - outb_p(0x07, W83697HF_EFER); /* point to logical device number reg */ - outb_p(0x08, W83697HF_EFDR); /* select logical device 8 (GPIO2) */ - outb_p(0x30, W83697HF_EFER); /* select CR30 */ - outb_p(0x01, W83697HF_EFDR); /* set bit 0 to activate GPIO2 */ + w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ + w83697hf_set_reg(0x30, 0x01); /* Enable timer/activate GPIO2 via bit 0 */ } static void @@ -109,17 +125,14 @@ w83697hf_init(void) w83697hf_select_wd_register(); - outb_p(0xF3, W83697HF_EFER); /* Select CRF3 */ - - t=inb_p(W83697HF_EFDR); /* read CRF3 */ + t = w83697hf_get_reg(0xF3); /* Read CRF3 */ if (t != 0) { printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); - outb_p(timeout, W83697HF_EFDR); /* Write back to CRF3 */ + w83697hf_set_reg(0xF3, timeout); /* Write new timeout */ } - outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */ - t=inb_p(W83697HF_EFDR); /* read CRF4 */ + t = w83697hf_get_reg(0xF4); /* Read CRF4 */ t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ - outb_p(t, W83697HF_EFDR); /* Write back to CRF4 */ + w83697hf_set_reg(0xF4, t); /* Write back to CRF4 */ w83697hf_unselect_wd_register(); } @@ -131,8 +144,7 @@ wdt_ctrl(int timeout) w83697hf_select_wd_register(); - outb_p(0xF4, W83697HF_EFER); /* Select CRF4 */ - outb_p(timeout, W83697HF_EFDR); /* Write Timeout counter to CRF4 */ + w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ w83697hf_unselect_wd_register(); -- cgit v1.2.3-70-g09d2 From c81b2996253a94278057f83a24dfa9053f0dee7a Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 10 This is patch 10 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - check whether the device is really present (we *can* probe for the device now). Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 54 +++++++++++++++++++++++++++++------- 1 file changed, 44 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index f62f1723871..4e0bd4e714e 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -49,9 +49,9 @@ static char expect_close; static spinlock_t io_lock; /* You must set this - there is no sane way to probe for this board. */ -static int wdt_io = 0x2E; +static int wdt_io = 0x2e; module_param(wdt_io, int, 0); -MODULE_PARM_DESC(wdt_io, "w83697hf WDT io port (default 0x2E)"); +MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); @@ -331,28 +331,62 @@ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; +static int +w83697hf_check_wdt(void) +{ + if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { + printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io); + return -EIO; + } + + printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io); + w83697hf_unlock(); + if (w83697hf_get_reg(0x20) == 0x60) { + printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io); + w83697hf_lock(); + return 0; + } + w83697hf_lock(); /* Reprotect in case it was a compatible device */ + + printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + release_region(wdt_io, 2); + return -EIO; +} + static int __init wdt_init(void) { - int ret; + int ret, autodetect; spin_lock_init(&io_lock); printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + autodetect = wdt_io == 0; + if (autodetect) + wdt_io = 0x2e; + + if (!w83697hf_check_wdt()) + goto found; + + if (autodetect) { + wdt_io = 0x4e; + if (!w83697hf_check_wdt()) + goto found; + } + + printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + ret = -EIO; + goto out; + +found: + if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", WATCHDOG_TIMEOUT); } - if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_io); - ret = -EIO; - goto out; - } - w83697hf_init(); ret = register_reboot_notifier(&wdt_notifier); -- cgit v1.2.3-70-g09d2 From a7933e05d46f49385841d09028ee07fae2b383f2 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 11 This is patch 11 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Add w83697hf_select_wdt() and w83697hf_deselect_wdt() so that the start/stop/ping code can directly talk to the watchdog. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 4e0bd4e714e..b12f8b80076 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -101,6 +101,19 @@ w83697hf_set_reg(unsigned char reg, unsigned char data) outb_p(data, W83697HF_EFDR); } +static void +w83697hf_select_wdt(void) +{ + w83697hf_unlock(); + w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ +} + +static inline void +w83697hf_deselect_wdt(void) +{ + w83697hf_lock(); +} + static void w83697hf_select_wd_register(void) { @@ -142,11 +155,11 @@ wdt_ctrl(int timeout) { spin_lock(&io_lock); - w83697hf_select_wd_register(); + w83697hf_select_wdt(); w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ - w83697hf_unselect_wd_register(); + w83697hf_deselect_wdt(); spin_unlock(&io_lock); } -- cgit v1.2.3-70-g09d2 From d46ab596e251e35a7e27c95e4e4d01921f3e579e Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 12 This is patch 12 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Add w83697hf_write_timeout() to set the watchdog's timeout value. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index b12f8b80076..b3dcc81abbb 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -83,8 +83,8 @@ w83697hf_lock(void) } /* - * The two functions w83697hf_get_reg() and w83697hf_set_reg() - * must be called with the device unlocked. + * The three functions w83697hf_get_reg(), w83697hf_set_reg() and + * w83697hf_write_timeout() must be called with the device unlocked. */ static unsigned char @@ -101,6 +101,12 @@ w83697hf_set_reg(unsigned char reg, unsigned char data) outb_p(data, W83697HF_EFDR); } +static void +w83697hf_write_timeout(int timeout) +{ + w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ +} + static void w83697hf_select_wdt(void) { @@ -157,7 +163,7 @@ wdt_ctrl(int timeout) w83697hf_select_wdt(); - w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ + w83697hf_write_timeout(timeout); w83697hf_deselect_wdt(); -- cgit v1.2.3-70-g09d2 From 089d8139f4c19c2f4d6984323e9d8a6e77cc92f7 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 13 This is patch 13 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Remove wdt_ctrl (it has been replaced with the w83697hf_write_timeout() function) and redo/clean-up the start/stop/ping code. - Make sure that the watchdog is enabled or disabled When starting or stoping the device (with a call to w83697hf_set_reg(0x30, ?); ). Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index b3dcc81abbb..2b3ce434c19 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -156,31 +156,44 @@ w83697hf_init(void) w83697hf_unselect_wd_register(); } -static void -wdt_ctrl(int timeout) +static int +wdt_ping(void) { spin_lock(&io_lock); - w83697hf_select_wdt(); w83697hf_write_timeout(timeout); w83697hf_deselect_wdt(); - spin_unlock(&io_lock); + return 0; } static int -wdt_ping(void) +wdt_enable(void) { - wdt_ctrl(timeout); + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_write_timeout(timeout); + w83697hf_set_reg(0x30, 1); /* Enable timer */ + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); return 0; } static int wdt_disable(void) { - wdt_ctrl(0); + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_set_reg(0x30, 0); /* Disable timer */ + w83697hf_write_timeout(0); + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); return 0; } @@ -267,7 +280,7 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } if (options & WDIOS_ENABLECARD) { - wdt_ping(); + wdt_enable(); retval = 0; } @@ -289,7 +302,7 @@ wdt_open(struct inode *inode, struct file *file) * Activate */ - wdt_ping(); + wdt_enable(); return nonseekable_open(inode, file); } -- cgit v1.2.3-70-g09d2 From fa69afd3c224252890cb30864dc648d1399dd9fe Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 14 This is patch 14 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Clean-up initialization code (part 1: remove w83697hf_select_wd_register() and w83697hf_unselect_wd_register() functions). - Make sure that the watchdog device is stopped as soon as we found it. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 27 ++++++--------------------- 1 file changed, 6 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 2b3ce434c19..1ea43bf2c35 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -120,29 +120,14 @@ w83697hf_deselect_wdt(void) w83697hf_lock(); } -static void -w83697hf_select_wd_register(void) -{ - w83697hf_unlock(); - - w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ - - w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ - w83697hf_set_reg(0x30, 0x01); /* Enable timer/activate GPIO2 via bit 0 */ -} - -static void -w83697hf_unselect_wd_register(void) -{ - w83697hf_lock(); -} - static void w83697hf_init(void) { unsigned char t; - w83697hf_select_wd_register(); + w83697hf_select_wdt(); + + w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ t = w83697hf_get_reg(0xF3); /* Read CRF3 */ if (t != 0) { @@ -153,7 +138,7 @@ w83697hf_init(void) t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ w83697hf_set_reg(0xF4, t); /* Write back to CRF4 */ - w83697hf_unselect_wd_register(); + w83697hf_deselect_wdt(); } static int @@ -412,6 +397,8 @@ wdt_init(void) goto out; found: + w83697hf_init(); + wdt_disable(); /* Disable watchdog until first use */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); @@ -419,8 +406,6 @@ found: WATCHDOG_TIMEOUT); } - w83697hf_init(); - ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", -- cgit v1.2.3-70-g09d2 From b7b9868ba6f528d60e5869b4a6aad1fe49838b03 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 15 This is patch 15 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Clean-up initialization code - part 2: * the line reading "set second mode & disable keyboard ..." is plain wrong, the register being manipulated (CRF4) is the counter itself, not the control byte (CRF3) -- looks like it has been copied from another driver. * I think garbage is being written in CRF3 (the control word) as the timeout value is being stored in this register (such as 60 for 60 seconds). * We only want to set pin 119 to WDTO# mode and leave the rest of CR29 like it is. * Set count mode to seconds and not minutes. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 1ea43bf2c35..78b6540e874 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -123,20 +123,18 @@ w83697hf_deselect_wdt(void) static void w83697hf_init(void) { - unsigned char t; + unsigned char bbuf; w83697hf_select_wdt(); - w83697hf_set_reg(0x29, 0x20); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + bbuf = w83697hf_get_reg(0x29); + bbuf &= ~0x60; + bbuf |= 0x20; + w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ - t = w83697hf_get_reg(0xF3); /* Read CRF3 */ - if (t != 0) { - printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); - w83697hf_set_reg(0xF3, timeout); /* Write new timeout */ - } - t = w83697hf_get_reg(0xF4); /* Read CRF4 */ - t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ - w83697hf_set_reg(0xF4, t); /* Write back to CRF4 */ + bbuf = w83697hf_get_reg(0xF3); + bbuf &= ~0x04; + w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */ w83697hf_deselect_wdt(); } -- cgit v1.2.3-70-g09d2 From 3fdee8db010d5cbf890ec49332ac4946f3f63720 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - patch 16 This is patch 16 in the series of patches that converts Marcus Junker's w83697hf watchdog driver to Samuel Tardieau's w83697hf/hg watchdog driver. This patch contains following changes: - Add copyright notice for Samuel Tardieu also. This is the last patch in this series. The original description for Samuel's driver was: driver for the Winbond W83697HF/W83697HG watchdog timer The Winbond SuperIO W83697HF/HG includes a watchdog that can count from 1 to 255 seconds (or minutes). This drivers allows the seconds mode to be used. It exposes a standard /dev/watchdog interface. This chip is currently being used on some motherboards designed by VIA. By default, the module looks for a chip at I/O port 0x2e. The chip can be configured to be at 0x4e on some motherboards, the address can be chosen using the wdt_io module parameter. Using 0 will try to autodetect the address. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 78b6540e874..21052de8a0c 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -1,6 +1,7 @@ /* * w83697hf/hg WDT driver * + * (c) Copyright 2006 Samuel Tardieu * (c) Copyright 2006 Marcus Junker * * Based on w83627hf_wdt.c which is based on advantechwdt.c @@ -442,6 +443,6 @@ module_init(wdt_init); module_exit(wdt_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Marcus Junker "); +MODULE_AUTHOR("Marcus Junker , Samuel Tardieu "); MODULE_DESCRIPTION("w83697hf/hg WDT driver"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3-70-g09d2 From e223f01a822e999b0aea2e720e12d8bb3532da70 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 15 Sep 2006 17:59:07 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - autodetect patch Change the autodetect code so that it is more generic. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/w83697hf_wdt.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c index 21052de8a0c..7768b55487c 100644 --- a/drivers/char/watchdog/w83697hf_wdt.c +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -369,33 +369,35 @@ w83697hf_check_wdt(void) return -EIO; } +static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 }; + static int __init wdt_init(void) { - int ret, autodetect; + int ret, i, found = 0; spin_lock_init(&io_lock); printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); - autodetect = wdt_io == 0; - if (autodetect) - wdt_io = 0x2e; - - if (!w83697hf_check_wdt()) - goto found; - - if (autodetect) { - wdt_io = 0x4e; + if (wdt_io == 0) { + /* we will autodetect the W83697HF/HG watchdog */ + for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) { + wdt_io = w83697hf_ioports[i]; + if (!w83697hf_check_wdt()) + found++; + } + } else { if (!w83697hf_check_wdt()) - goto found; + found++; } - printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); - ret = -EIO; - goto out; + if (!found) { + printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + ret = -EIO; + goto out; + } -found: w83697hf_init(); wdt_disable(); /* Disable watchdog until first use */ -- cgit v1.2.3-70-g09d2 From ff02cfc76a5040ee125c597baa1cfc9874918ed2 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Thu, 7 Sep 2006 11:57:00 +0200 Subject: [WATCHDOG] w83697hf/hg WDT driver - Kconfig patch Update Kconfig for the w83697hf/hg watchdog driver. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index ecae59cd767..847a26064b6 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -431,12 +431,14 @@ config W83627HF_WDT Most people will say N. config W83697HF_WDT - tristate "W83697HF Watchdog Timer" + tristate "W83697HF/W83697HG Watchdog Timer" depends on WATCHDOG && X86 ---help--- - This is the driver for the hardware watchdog on the W83697HF chipset - This watchdog simply watches your kernel to make sure it doesn't freeze, - and if it does, it reboots your computer after a certain amount of time. + This is the driver for the hardware watchdog on the W83697HF/HG + chipset as used in Dedibox/VIA motherboards (and likely others). + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. To compile this driver as a module, choose M here: the module will be called w83697hf_wdt. -- cgit v1.2.3-70-g09d2 From e34477e9906acc137329b654a51fb7d4598813f7 Mon Sep 17 00:00:00 2001 From: Amol Lad Date: Fri, 6 Oct 2006 13:41:12 -0700 Subject: [WATCHDOG] ioremap balanced with iounmap for drivers/char/watchdog/s3c2410_wdt.c ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by: Amol Lad Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/s3c2410_wdt.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index b36a04ae9ab..d54d0efe075 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -381,18 +381,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { printk(KERN_INFO PFX "failed to get irq resource\n"); + iounmap(wdt_base); return -ENOENT; } ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); if (ret != 0) { printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); + iounmap(wdt_base); return ret; } wdt_clock = clk_get(&pdev->dev, "watchdog"); if (wdt_clock == NULL) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); + iounmap(wdt_base); return -ENOENT; } @@ -416,6 +419,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (ret) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); + iounmap(wdt_base); return ret; } @@ -452,6 +456,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) wdt_clock = NULL; } + iounmap(wdt_base); misc_deregister(&s3c2410wdt_miscdev); return 0; } -- cgit v1.2.3-70-g09d2 From bcbf25bd0d4afb108a755e1c4e4e2d854a2869d7 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Wed, 4 Oct 2006 14:18:29 +0200 Subject: [WATCHDOG] add ich8 support to iTCO_wdt.c Add ICH8 support to the iTCO_wdt driver. Signed-off-by: Arnaud Patard Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/iTCO_wdt.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index aaac94db0d8..639d84f0c02 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -85,6 +85,7 @@ enum iTCO_chipsets { TCO_ICH7, /* ICH7 & ICH7R */ TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ + TCO_ICH8, /* ICH8 */ }; static struct { @@ -108,6 +109,7 @@ static struct { {"ICH7 or ICH7R", 2}, {"ICH7-M", 2}, {"ICH7-M DH", 2}, + {"ICH8 or ICH8R", 2}, {NULL,0} }; @@ -135,6 +137,7 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); -- cgit v1.2.3-70-g09d2 From a8edd74e4404d011ab821d5bf35b27335d26f001 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sun, 8 Oct 2006 21:05:21 +0200 Subject: [WATCHDOG] add ich8 support to iTCO_wdt.c (patch 2) Add ICH8 support to the iTCO_wdt driver. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/iTCO_wdt.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index 639d84f0c02..505aae91776 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -35,6 +35,10 @@ * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, + * 82801HB (ICH8) : document number 313056-002, 313057-004, + * 82801HR (ICH8R) : document number 313056-002, 313057-004, + * 82801HH (ICH8DH) : document number 313056-002, 313057-004, + * 82801HO (ICH8DO) : document number 313056-002, 313057-004, * 6300ESB (6300ESB) : document number 300641-003 */ @@ -45,7 +49,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" #define DRV_VERSION "1.00" -#define DRV_RELDATE "30-Jul-2006" +#define DRV_RELDATE "08-Oct-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -85,7 +89,9 @@ enum iTCO_chipsets { TCO_ICH7, /* ICH7 & ICH7R */ TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ - TCO_ICH8, /* ICH8 */ + TCO_ICH8, /* ICH8 & ICH8R */ + TCO_ICH8DH, /* ICH8DH */ + TCO_ICH8DO, /* ICH8DO */ }; static struct { @@ -110,6 +116,8 @@ static struct { {"ICH7-M", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, + {"ICH8DH", 2}, + {"ICH8DO", 2}, {NULL,0} }; @@ -138,6 +146,8 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO }, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); -- cgit v1.2.3-70-g09d2 From 80060362aaefec507ac2d7a7bd156716d7a7ca91 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 10 Oct 2006 03:40:44 -0400 Subject: [WATCHDOG] watchdog/iTCO_wdt: fix bug related to gcc uninit warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc emits the following warning: drivers/char/watchdog/iTCO_wdt.c: In function ‘iTCO_wdt_ioctl’: drivers/char/watchdog/iTCO_wdt.c:429: warning: ‘time_left’ may be used uninitialized in this function This indicates a condition near enough to a bug, to want to fix. iTCO_wdt_get_timeleft() stores a value in 'time_left' iff iTCO_version==(1 or 2). This driver only supports versions 1 or 2, so this is ok. However, since (a) the return value of iTCO_wdt_get_timeleft() is handled anyway, (b) it fixes the warning, and (c) it future-proofs the driver, we go ahead and add the obvious return value. Signed-off-by: Jeff Garzik Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/watchdog/iTCO_wdt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index 505aae91776..b6f29cb8bd3 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -368,7 +368,8 @@ static int iTCO_wdt_get_timeleft (int *time_left) spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val8 * 6) / 10; - } + } else + return -EINVAL; return 0; } @@ -439,7 +440,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, { int new_options, retval = -EINVAL; int new_heartbeat; - int time_left; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { @@ -499,6 +499,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, case WDIOC_GETTIMELEFT: { + int time_left; + if (iTCO_wdt_get_timeleft(&time_left)) return -EINVAL; -- cgit v1.2.3-70-g09d2 From bdcff3458f5448fac585a6174ad9342f361b5135 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 26 Sep 2006 17:49:30 +0200 Subject: [WATCHDOG] Atmel AT91RM9200 rename. The new Atmel AT91SAM9261 and AT91SAM9260 processors use a different internal watchdog peripheral. This watchdog driver is therefore AT91RM9200-specific. This patch renames at91_wdt.c to at91rm9200_wdt.c, and changes the name of the configuration option. Signed-off-by: Andrew Victor Signed-off-by: Wim Van Sebroeck --- arch/arm/configs/at91rm9200dk_defconfig | 2 +- arch/arm/configs/at91rm9200ek_defconfig | 2 +- arch/arm/configs/csb337_defconfig | 2 +- arch/arm/configs/csb637_defconfig | 2 +- arch/arm/configs/kafa_defconfig | 2 +- arch/arm/configs/onearm_defconfig | 2 +- drivers/char/watchdog/Kconfig | 2 +- drivers/char/watchdog/Makefile | 2 +- drivers/char/watchdog/at91_wdt.c | 287 -------------------------------- drivers/char/watchdog/at91rm9200_wdt.c | 287 ++++++++++++++++++++++++++++++++ 10 files changed, 295 insertions(+), 295 deletions(-) delete mode 100644 drivers/char/watchdog/at91_wdt.c create mode 100644 drivers/char/watchdog/at91rm9200_wdt.c (limited to 'drivers') diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index c82e4667f45..b43041476e0 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -577,7 +577,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index b983fc59aa4..d96fc8386e2 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -558,7 +558,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index a2d6fd398f1..20e68250d83 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 2a1ac6c60ab..df8595ac031 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 54fcd75779d..a4cdafc1548 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -560,7 +560,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index cb1d94f9049..9b9f2155af3 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -607,7 +607,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 847a26064b6..529f0a70690 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -60,7 +60,7 @@ config SOFT_WATCHDOG # ARM Architecture -config AT91_WATCHDOG +config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" depends on WATCHDOG && ARCH_AT91RM9200 help diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index ee3474190e2..36440497047 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o # ARM Architecture -obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o +obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91_wdt.c deleted file mode 100644 index 4e7a1145e78..00000000000 --- a/drivers/char/watchdog/at91_wdt.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Watchdog driver for Atmel AT91RM9200 (Thunder) - * - * Copyright (C) 2003 SAN People (Pty) Ltd - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#define WDT_DEFAULT_TIME 5 /* seconds */ -#define WDT_MAX_TIME 256 /* seconds */ - -static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; - -module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); - -#ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#endif - - -static unsigned long at91wdt_busy; - -/* ......................................................................... */ - -/* - * Disable the watchdog. - */ -static void inline at91_wdt_stop(void) -{ - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN); -} - -/* - * Enable and reset the watchdog. - */ -static void inline at91_wdt_start(void) -{ - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); -} - -/* - * Reload the watchdog timer. (ie, pat the watchdog) - */ -static void inline at91_wdt_reload(void) -{ - at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); -} - -/* ......................................................................... */ - -/* - * Watchdog device is opened, and watchdog starts running. - */ -static int at91_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &at91wdt_busy)) - return -EBUSY; - - at91_wdt_start(); - return nonseekable_open(inode, file); -} - -/* - * Close the watchdog device. - * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also - * disabled. - */ -static int at91_wdt_close(struct inode *inode, struct file *file) -{ - if (!nowayout) - at91_wdt_stop(); /* Disable the watchdog when file is closed */ - - clear_bit(0, &at91wdt_busy); - return 0; -} - -/* - * Change the watchdog time interval. - */ -static int at91_wdt_settimeout(int new_time) -{ - /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz - * - * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. - */ - if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) - return -EINVAL; - - /* Set new watchdog time. It will be used when at91_wdt_start() is called. */ - wdt_time = new_time; - return 0; -} - -static struct watchdog_info at91_wdt_info = { - .identity = "at91 watchdog", - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -}; - -/* - * Handle commands from user-space. - */ -static int at91_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_value; - - switch(cmd) { - case WDIOC_KEEPALIVE: - at91_wdt_reload(); /* pat the watchdog */ - return 0; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (at91_wdt_settimeout(new_value)) - return -EINVAL; - - /* Enable new time value */ - at91_wdt_start(); - - /* Return current value */ - return put_user(wdt_time, p); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) - at91_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - at91_wdt_start(); - return 0; - - default: - return -ENOTTY; - } -} - -/* - * Pat the watchdog whenever device is written to. - */ -static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) -{ - at91_wdt_reload(); /* pat the watchdog */ - return len; -} - -/* ......................................................................... */ - -static const struct file_operations at91wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .ioctl = at91_wdt_ioctl, - .open = at91_wdt_open, - .release = at91_wdt_close, - .write = at91_wdt_write, -}; - -static struct miscdevice at91wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &at91wdt_fops, -}; - -static int __init at91wdt_probe(struct platform_device *pdev) -{ - int res; - - if (at91wdt_miscdev.dev) - return -EBUSY; - at91wdt_miscdev.dev = &pdev->dev; - - res = misc_register(&at91wdt_miscdev); - if (res) - return res; - - printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); - return 0; -} - -static int __exit at91wdt_remove(struct platform_device *pdev) -{ - int res; - - res = misc_deregister(&at91wdt_miscdev); - if (!res) - at91wdt_miscdev.dev = NULL; - - return res; -} - -static void at91wdt_shutdown(struct platform_device *pdev) -{ - at91_wdt_stop(); -} - -#ifdef CONFIG_PM - -static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message) -{ - at91_wdt_stop(); - return 0; -} - -static int at91wdt_resume(struct platform_device *pdev) -{ - if (at91wdt_busy) - at91_wdt_start(); - return 0; -} - -#else -#define at91wdt_suspend NULL -#define at91wdt_resume NULL -#endif - -static struct platform_driver at91wdt_driver = { - .probe = at91wdt_probe, - .remove = __exit_p(at91wdt_remove), - .shutdown = at91wdt_shutdown, - .suspend = at91wdt_suspend, - .resume = at91wdt_resume, - .driver = { - .name = "at91_wdt", - .owner = THIS_MODULE, - }, -}; - -static int __init at91_wdt_init(void) -{ - /* Check that the heartbeat value is within range; if not reset to the default */ - if (at91_wdt_settimeout(wdt_time)) { - at91_wdt_settimeout(WDT_DEFAULT_TIME); - pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time); - } - - return platform_driver_register(&at91wdt_driver); -} - -static void __exit at91_wdt_exit(void) -{ - platform_driver_unregister(&at91wdt_driver); -} - -module_init(at91_wdt_init); -module_exit(at91_wdt_exit); - -MODULE_AUTHOR("Andrew Victor"); -MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/char/watchdog/at91rm9200_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c new file mode 100644 index 00000000000..4e7a1145e78 --- /dev/null +++ b/drivers/char/watchdog/at91rm9200_wdt.c @@ -0,0 +1,287 @@ +/* + * Watchdog driver for Atmel AT91RM9200 (Thunder) + * + * Copyright (C) 2003 SAN People (Pty) Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define WDT_DEFAULT_TIME 5 /* seconds */ +#define WDT_MAX_TIME 256 /* seconds */ + +static int wdt_time = WDT_DEFAULT_TIME; +static int nowayout = WATCHDOG_NOWAYOUT; + +module_param(wdt_time, int, 0); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); + +#ifdef CONFIG_WATCHDOG_NOWAYOUT +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +#endif + + +static unsigned long at91wdt_busy; + +/* ......................................................................... */ + +/* + * Disable the watchdog. + */ +static void inline at91_wdt_stop(void) +{ + at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN); +} + +/* + * Enable and reset the watchdog. + */ +static void inline at91_wdt_start(void) +{ + at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); + at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static void inline at91_wdt_reload(void) +{ + at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); +} + +/* ......................................................................... */ + +/* + * Watchdog device is opened, and watchdog starts running. + */ +static int at91_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &at91wdt_busy)) + return -EBUSY; + + at91_wdt_start(); + return nonseekable_open(inode, file); +} + +/* + * Close the watchdog device. + * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also + * disabled. + */ +static int at91_wdt_close(struct inode *inode, struct file *file) +{ + if (!nowayout) + at91_wdt_stop(); /* Disable the watchdog when file is closed */ + + clear_bit(0, &at91wdt_busy); + return 0; +} + +/* + * Change the watchdog time interval. + */ +static int at91_wdt_settimeout(int new_time) +{ + /* + * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * + * Since WDV is a 16-bit counter, the maximum period is + * 65536 / 0.256 = 256 seconds. + */ + if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) + return -EINVAL; + + /* Set new watchdog time. It will be used when at91_wdt_start() is called. */ + wdt_time = new_time; + return 0; +} + +static struct watchdog_info at91_wdt_info = { + .identity = "at91 watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +}; + +/* + * Handle commands from user-space. + */ +static int at91_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_value; + + switch(cmd) { + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + + /* Enable new time value */ + at91_wdt_start(); + + /* Return current value */ + return put_user(wdt_time, p); + + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + + if (new_value & WDIOS_DISABLECARD) + at91_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) + at91_wdt_start(); + return 0; + + default: + return -ENOTTY; + } +} + +/* + * Pat the watchdog whenever device is written to. + */ +static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +{ + at91_wdt_reload(); /* pat the watchdog */ + return len; +} + +/* ......................................................................... */ + +static const struct file_operations at91wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = at91_wdt_ioctl, + .open = at91_wdt_open, + .release = at91_wdt_close, + .write = at91_wdt_write, +}; + +static struct miscdevice at91wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &at91wdt_fops, +}; + +static int __init at91wdt_probe(struct platform_device *pdev) +{ + int res; + + if (at91wdt_miscdev.dev) + return -EBUSY; + at91wdt_miscdev.dev = &pdev->dev; + + res = misc_register(&at91wdt_miscdev); + if (res) + return res; + + printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + return 0; +} + +static int __exit at91wdt_remove(struct platform_device *pdev) +{ + int res; + + res = misc_deregister(&at91wdt_miscdev); + if (!res) + at91wdt_miscdev.dev = NULL; + + return res; +} + +static void at91wdt_shutdown(struct platform_device *pdev) +{ + at91_wdt_stop(); +} + +#ifdef CONFIG_PM + +static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message) +{ + at91_wdt_stop(); + return 0; +} + +static int at91wdt_resume(struct platform_device *pdev) +{ + if (at91wdt_busy) + at91_wdt_start(); + return 0; +} + +#else +#define at91wdt_suspend NULL +#define at91wdt_resume NULL +#endif + +static struct platform_driver at91wdt_driver = { + .probe = at91wdt_probe, + .remove = __exit_p(at91wdt_remove), + .shutdown = at91wdt_shutdown, + .suspend = at91wdt_suspend, + .resume = at91wdt_resume, + .driver = { + .name = "at91_wdt", + .owner = THIS_MODULE, + }, +}; + +static int __init at91_wdt_init(void) +{ + /* Check that the heartbeat value is within range; if not reset to the default */ + if (at91_wdt_settimeout(wdt_time)) { + at91_wdt_settimeout(WDT_DEFAULT_TIME); + pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time); + } + + return platform_driver_register(&at91wdt_driver); +} + +static void __exit at91_wdt_exit(void) +{ + platform_driver_unregister(&at91wdt_driver); +} + +module_init(at91_wdt_init); +module_exit(at91_wdt_exit); + +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v1.2.3-70-g09d2 From cbf40d3f04c2c76a58f1183bb4a9a82fefb842e3 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Sat, 14 Oct 2006 20:18:47 +0200 Subject: [WATCHDOG] remove experimental on iTCO_wdt.c The iTCO_wdt.c driver has been tested enough. So we can remove the experimental classification. Signed-off-by: Wim Van Sebroeck --- drivers/char/watchdog/Kconfig | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 529f0a70690..0187b118532 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -316,13 +316,16 @@ config I8XX_TCO To compile this driver as a module, choose M here: the module will be called i8xx_tco. + Note: This driver will be removed in the near future. Please + use the Intel TCO Timer/Watchdog driver. + config ITCO_WDT - tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)" - depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL + tristate "Intel TCO Timer/Watchdog" + depends on WATCHDOG && (X86 || IA64) && PCI ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer @@ -590,7 +593,7 @@ config SH_WDT_MMAP help If you say Y here, user applications will be able to mmap the WDT/CPG registers. -# + # SPARC64 Architecture config WATCHDOG_CP1XXX -- cgit v1.2.3-70-g09d2