From 220cad3cbf553f893432919b458da36489373fc6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Nov 2010 09:32:58 +0800 Subject: drm/i915: Always set the DP transcoder config to 8BPC. The pipe is always set to 8BPC, but here we were leaving whatever previous bits were set by the BIOS in place. Signed-off-by: Eric Anholt Tested-by: Keith Packard Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_display.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25ed911a311..878fc766a12 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3033,6 +3033,7 @@ #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) +#define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 255b52ee009..9d3af3cb5a0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; -- cgit v1.2.3-70-g09d2 From 5bddd17fec58f253cddd0bc9eab2cd9eb1bbab4a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 18 Nov 2010 09:32:59 +0800 Subject: drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI. This workaround only applies to Ironlake. Signed-off-by: Eric Anholt Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 300f64b4238..1d8d068bc47 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1374,6 +1374,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); uint32_t DP = intel_dp->DP; DRM_DEBUG_KMS("\n"); @@ -1398,6 +1399,26 @@ intel_dp_link_down(struct intel_dp *intel_dp) if (is_edp(intel_dp)) DP |= DP_LINK_TRAIN_OFF; + + if (!HAS_PCH_CPT(dev) && (DP & DP_PIPEB_SELECT)) { + /* Hardware workaround: leaving our transcoder select + * set to transcoder B while it's off will prevent the + * corresponding HDMI output on transcoder A. + * + * Combine this with another hardware workaround: + * transcoder select bit can only be cleared while the + * port is enabled. + */ + DP &= ~DP_PIPEB_SELECT; + I915_WRITE(intel_dp->output_reg, DP); + + /* Changes to enable or select take place the vblank + * after being written. + */ + intel_wait_for_vblank(intel_dp->base.base.dev, + intel_crtc->pipe); + } + I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); POSTING_READ(intel_dp->output_reg); } -- cgit v1.2.3-70-g09d2 From 47f1c6c9ffdec0c0e5a2c2709bd63c7380b325c4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 3 Dec 2010 15:37:31 +0000 Subject: drm/i915: Clean conflicting modesetting registers upon init If we leave the registers in a conflicting state then when we attempt to teardown the active mode, we will not disable the pipes and planes in the correct order -- leaving a plane reading from a disabled pipe and possibly leading to undefined behaviour. Reported-and-tested-by: Andy Whitcroft Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32078 Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_display.c | 51 ++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9d3af3cb5a0..e5badadbdcd 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5238,6 +5238,55 @@ static const struct drm_crtc_funcs intel_crtc_funcs = { .page_flip = intel_crtc_page_flip, }; +static void intel_sanitize_modesetting(struct drm_device *dev, + int pipe, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + if (HAS_PCH_SPLIT(dev)) + return; + + /* Who knows what state these registers were left in by the BIOS or + * grub? + * + * If we leave the registers in a conflicting state (e.g. with the + * display plane reading from the other pipe than the one we intend + * to use) then when we attempt to teardown the active mode, we will + * not disable the pipes and planes in the correct order -- leaving + * a plane reading from a disabled pipe and possibly leading to + * undefined behaviour. + */ + + reg = DSPCNTR(plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0) + return; + if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) + return; + + /* This display plane is active and attached to the other CPU pipe. */ + pipe = !pipe; + + /* Disable the plane and wait for it to stop reading from the pipe. */ + I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + + if (IS_GEN2(dev)) + intel_wait_for_vblank(dev, pipe); + + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + /* Switch off the pipe. */ + reg = PIPECONF(pipe); + val = I915_READ(reg); + if (val & PIPECONF_ENABLE) { + I915_WRITE(reg, val & ~PIPECONF_ENABLE); + intel_wait_for_pipe_off(dev, pipe); + } +} static void intel_crtc_init(struct drm_device *dev, int pipe) { @@ -5289,6 +5338,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); + + intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, -- cgit v1.2.3-70-g09d2 From 22ed1113a9adda6e193c329119a384362da01289 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 4 Dec 2010 01:01:29 +0000 Subject: drm/i915: Death to the unnecessary 64bit divide Use the hardware DDA to calculate the ratio with as much accuracy as is possible. Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_display.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e5badadbdcd..fac118b2df7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2714,27 +2714,19 @@ fdi_reduce_ratio(u32 *num, u32 *den) } } -#define DATA_N 0x800000 -#define LINK_N 0x80000 - static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { - u64 temp; - m_n->tu = 64; /* default size */ - temp = (u64) DATA_N * pixel_clock; - temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); - m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ - m_n->gmch_n = DATA_N; + /* BUG_ON(pixel_clock > INT_MAX / 36); */ + m_n->gmch_m = bits_per_pixel * pixel_clock; + m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - temp = (u64) LINK_N * pixel_clock; - m_n->link_m = div_u64(temp, link_clock); - m_n->link_n = LINK_N; + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } -- cgit v1.2.3-70-g09d2 From 49078f7d108f132582e5af46304c317b55f83948 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 4 Dec 2010 07:45:57 +0000 Subject: drm/i915: Factor in pixel-repeat in FDI M/N calculation Fixes the modesetting on the secondary panel of the Libretto W100 and presumably many more Ironlake laptops with SDVO LVDS displays. Reported-and-tested-by: Matthew Willoughby Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fac118b2df7..d9b7092439e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3710,6 +3710,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (HAS_PCH_SPLIT(dev)) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int lane = 0, link_bw, bpp; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ @@ -3793,6 +3794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->fdi_lanes = lane; + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } -- cgit v1.2.3-70-g09d2 From 136711be41ec97f7f1a9c3a5e8535eb7da5fea59 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 4 Dec 2010 16:13:06 +0100 Subject: agp/intel: Fix wrong kunmap in i830_cleanup() Add a missing NULL check and fix the wrong address passed to kunmap() in i830_cleanup(). Cc: stable@kernel.org Signed-off-by: Takashi Iwai [danvet: added cc stable] Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/char/agp/intel-gtt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9272c38dd3c..16a2847b7cd 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -812,8 +812,10 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - kunmap(intel_private.i8xx_page); - intel_private.i8xx_flush_page = NULL; + if (intel_private.i8xx_flush_page) { + kunmap(intel_private.i8xx_flush_page); + intel_private.i8xx_flush_page = NULL; + } __free_page(intel_private.i8xx_page); intel_private.i8xx_page = NULL; -- cgit v1.2.3-70-g09d2 From bbf0c6b3620b3872929ef7d3c392ce436889110f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 5 Dec 2010 11:30:40 +0100 Subject: drm/i915: announce to userspace that the bsd ring is coherent Otherwise we can't really fix the abi-braindeadness of forcing libva to manually wait for rendering when switching rings. Which in turn makes implementing hw semaphores a pointless exercise (at least for ironlake). [Also added the relaxed fencing param to explain the jump in numbering - relaxed fencing is in -next.] Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_dma.c | 3 +++ include/drm/i915_drm.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 7a26f4dd21a..e6800819bca 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -767,6 +767,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_BLT: value = HAS_BLT(dev); break; + case I915_PARAM_HAS_COHERENT_RINGS: + value = 1; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 8c641bed9bb..a2776e2807a 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -287,6 +287,8 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_EXECBUF2 9 #define I915_PARAM_HAS_BSD 10 #define I915_PARAM_HAS_BLT 11 +#define I915_PARAM_HAS_RELAXED_FENCING 12 +#define I915_PARAM_HAS_COHERENT_RINGS 13 typedef struct drm_i915_getparam { int param; -- cgit v1.2.3-70-g09d2 From 6fd0d56e3bc1abfb237b8824261b613e21e77bc8 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 5 Dec 2010 20:42:33 +0000 Subject: drm/i915/ringbuffer: Only print an error on the second attempt to reset head There's not much we can do here but hope for the best. However the first failure happens quite frequently and if often remedied by the second attempt to reset HEAD. So only print the error if that attempt also fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=19802 Reported-by: Thomas Meyer Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_ringbuffer.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index b83306f9244..89a65be8a3f 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -156,23 +156,25 @@ static int init_ring_common(struct drm_device *dev, /* G45 ring initialization fails to reset head to zero */ if (head != 0) { - DRM_ERROR("%s head not reset to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + DRM_DEBUG_KMS("%s head not reset to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); I915_WRITE_HEAD(ring, 0); - DRM_ERROR("%s head forced to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + if (I915_READ_HEAD(ring) & HEAD_ADDR) { + DRM_ERROR("failed to set %s head to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); + } } I915_WRITE_CTL(ring, -- cgit v1.2.3-70-g09d2 From 2a1292fd4cf1558b4a60781227d503c9111d9075 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 5 Dec 2010 19:21:18 +0000 Subject: drm/i915/lvds: Always restore panel-fitter when enabling the LVDS Linus Torvalds pointed out that our code was unbalanced when powering on the panel with respect to the power off sequence in that we were failing to restore the panel-fitter. The consequence of this would be that across a simple DPMS off/on for a non-native mode, without an intervening modeset, the panel fitter would remain disabled and the output would shift on the panel. Reported-by: Linus Torvalds Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_lvds.c | 98 +++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f79327fc665..25bcedf386f 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) /** * Sets the power state for the panel. */ -static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) +static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) lvds_reg = LVDS; } - if (on) { - I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - intel_panel_set_backlight(dev, dev_priv->backlight_level); - } else { - dev_priv->backlight_level = intel_panel_get_backlight(dev); - - intel_panel_set_backlight(dev, 0); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - if (intel_lvds->pfit_control) { - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - I915_WRITE(PFIT_CONTROL, 0); - intel_lvds->pfit_control = 0; + if (intel_lvds->pfit_dirty) { + /* + * Enable automatic panel scaling so that non-native modes + * fill the screen. The panel fitter should only be + * adjusted whilst the pipe is disabled, according to + * register description and PRM. + */ + DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", + intel_lvds->pfit_control, + intel_lvds->pfit_pgm_ratios); + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) { + DRM_ERROR("timed out waiting for panel to power off\n"); + } else { + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); intel_lvds->pfit_dirty = false; } + } + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); + POSTING_READ(lvds_reg); + + intel_panel_set_backlight(dev, dev_priv->backlight_level); +} - I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); +static void intel_lvds_disable(struct intel_lvds *intel_lvds) +{ + struct drm_device *dev = intel_lvds->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 ctl_reg, lvds_reg; + + if (HAS_PCH_SPLIT(dev)) { + ctl_reg = PCH_PP_CONTROL; + lvds_reg = PCH_LVDS; + } else { + ctl_reg = PP_CONTROL; + lvds_reg = LVDS; + } + + dev_priv->backlight_level = intel_panel_get_backlight(dev); + intel_panel_set_backlight(dev, 0); + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + + if (intel_lvds->pfit_control) { + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + + I915_WRITE(PFIT_CONTROL, 0); + intel_lvds->pfit_dirty = true; } + + I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); POSTING_READ(lvds_reg); } @@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) struct intel_lvds *intel_lvds = to_intel_lvds(encoder); if (mode == DRM_MODE_DPMS_ON) - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); else - intel_lvds_set_power(intel_lvds, false); + intel_lvds_disable(intel_lvds); /* XXX: We never power down the LVDS pairs. */ } @@ -411,43 +446,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder) /* Always do a full power on as we do not know what state * we were left in. */ - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); } static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* * The LVDS pin pair will already have been turned on in the * intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ - - if (HAS_PCH_SPLIT(dev)) - return; - - if (!intel_lvds->pfit_dirty) - return; - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", - intel_lvds->pfit_control, - intel_lvds->pfit_pgm_ratios); - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); - intel_lvds->pfit_dirty = false; } /** -- cgit v1.2.3-70-g09d2 From 7a1948768c2998f5bddb2327696cbe3161f468ed Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 7 Dec 2010 10:38:40 +0000 Subject: drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo In order for bos to retire eventually, a request must be sent down the ring. This is expected, for example, by occlusion queries for which mesa will wait upon (whilst running glean) before issuing more batches and so the normal activity upon the ring is suspended and we need to emit a request to clear the idle ring. Reported-by: Jinjin, Wang Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30380 Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5e54821af99..275ec6ed43a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4374,10 +4374,20 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * use this buffer rather sooner than later, so issuing the required * flush earlier is beneficial. */ - if (obj->write_domain & I915_GEM_GPU_DOMAINS) + if (obj->write_domain & I915_GEM_GPU_DOMAINS) { i915_gem_flush_ring(dev, file_priv, obj_priv->ring, 0, obj->write_domain); + } else if (obj_priv->ring->outstanding_lazy_request) { + /* This ring is not being cleared by active usage, + * so emit a request to do so. + */ + u32 seqno = i915_add_request(dev, + NULL, NULL, + obj_priv->ring); + if (seqno == 0) + ret = -ENOMEM; + } /* Update the active list for the hardware's current position. * Otherwise this only updates on a delayed timer or when irqs -- cgit v1.2.3-70-g09d2 From 1b39d6f37622f1da70aa2cfd38bfff9a52c13e05 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 6 Dec 2010 11:20:45 +0000 Subject: drm/i915/dp: Only apply the workaround if the select is still active As we may try to power down the link at various times, it is not necessarily still coupled with an encoder and so we must be careful not to depend upon an operation that is only valid when the link is still attached to a pipe. Fixes regression in 5bddd17. Reported-and-tested-by: Daniel Vetter Signed-off-by: Chris Wilson Cc: stable@kernel.org [after applying 5bddd17] --- drivers/gpu/drm/i915/intel_dp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1d8d068bc47..df648cb4c29 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1374,9 +1374,11 @@ intel_dp_link_down(struct intel_dp *intel_dp) { struct drm_device *dev = intel_dp->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); uint32_t DP = intel_dp->DP; + if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + DRM_DEBUG_KMS("\n"); if (is_edp(intel_dp)) { @@ -1400,7 +1402,9 @@ intel_dp_link_down(struct intel_dp *intel_dp) if (is_edp(intel_dp)) DP |= DP_LINK_TRAIN_OFF; - if (!HAS_PCH_CPT(dev) && (DP & DP_PIPEB_SELECT)) { + if (!HAS_PCH_CPT(dev) && + I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); /* Hardware workaround: leaving our transcoder select * set to transcoder B while it's off will prevent the * corresponding HDMI output on transcoder A. -- cgit v1.2.3-70-g09d2 From ea5d552c73707645c53d42e8a71c9a4d9cbb85c1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 1 Dec 2010 19:41:31 +0000 Subject: drm: Add missing drm_vblank_put() along queue vblank error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Chris Wilson Cc: Kristian Høgsberg Acked-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 9d3a5030b6e..722700d5d73 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -585,10 +585,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, struct timeval now; unsigned long flags; unsigned int seq; + int ret; e = kzalloc(sizeof *e, GFP_KERNEL); - if (e == NULL) - return -ENOMEM; + if (e == NULL) { + ret = -ENOMEM; + goto err_put; + } e->pipe = pipe; e->base.pid = current->pid; @@ -603,9 +606,8 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, spin_lock_irqsave(&dev->event_lock, flags); if (file_priv->event_space < sizeof e->event) { - spin_unlock_irqrestore(&dev->event_lock, flags); - kfree(e); - return -ENOMEM; + ret = -EBUSY; + goto err_unlock; } file_priv->event_space -= sizeof e->event; @@ -638,6 +640,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe, spin_unlock_irqrestore(&dev->event_lock, flags); return 0; + +err_unlock: + spin_unlock_irqrestore(&dev->event_lock, flags); + kfree(e); +err_put: + drm_vblank_put(dev, e->pipe); + return ret; } /** -- cgit v1.2.3-70-g09d2 From 541cc966915b6756e54c20eebe60ae957afdb537 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 6 Dec 2010 11:24:07 +0000 Subject: drm: Don't try and disable an encoder that was never enabled Prevents code that assumes that the encoder is active when asked to be disabled from dying a horrible death. Reported-by: Daniel Vetter Signed-off-by: Chris Wilson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 7ca59359fee..bede10a0340 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -241,7 +241,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev) } list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - if (!drm_helper_encoder_in_use(encoder)) { + if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) { drm_encoder_disable(encoder); /* disconnector encoder from any connector */ encoder->crtc = NULL; -- cgit v1.2.3-70-g09d2 From 93225b0d7bc030f4a93165347a65893685822d70 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 3 Dec 2010 16:38:19 -0500 Subject: drm/radeon/kms: forbid big bo allocation (fdo 31708) v3 Forbid allocating buffer bigger than visible VRAM or GTT, also properly set lpfn field. v2 - use max macro - silence warning v3 - don't explicitly set range limit - use min macro Cc: stable Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_object.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 1d067743fee..a598d0049aa 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) u32 c = 0; rbo->placement.fpfn = 0; - rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT; + rbo->placement.lpfn = 0; rbo->placement.placement = rbo->placements; rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) @@ -91,7 +91,8 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, { struct radeon_bo *bo; enum ttm_bo_type type; - int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT; + unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT; + unsigned long max_size = 0; int r; if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) { @@ -104,6 +105,14 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj, } *bo_ptr = NULL; + /* maximun bo size is the minimun btw visible vram and gtt size */ + max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size); + if ((page_align << PAGE_SHIFT) >= max_size) { + printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n", + __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20); + return -ENOMEM; + } + retry: bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL); if (bo == NULL) -- cgit v1.2.3-70-g09d2 From dd7cc55a258400440aff5869d3e1e111142297cd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 3 Dec 2010 14:37:21 -0500 Subject: drm/radeon/kms: fix formatting of vram and gtt info print the full 64 bit values. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d8ac1849180..e12e79326cb 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -286,7 +286,7 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 mc->mc_vram_size = mc->aper_size; } mc->vram_end = mc->vram_start + mc->mc_vram_size - 1; - dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n", + dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n", mc->mc_vram_size >> 20, mc->vram_start, mc->vram_end, mc->real_vram_size >> 20); } @@ -323,7 +323,7 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align; } mc->gtt_end = mc->gtt_start + mc->gtt_size - 1; - dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n", + dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n", mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end); } -- cgit v1.2.3-70-g09d2 From 8961d52d4cc52edf5672f8f2712c57162b736793 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 3 Dec 2010 14:37:22 -0500 Subject: drm/radeon/kms: fix vram base calculation on rs780/rs880 Avoid overflowing a 32 bit value. Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index a3552594ccc..a322d4f647b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1195,8 +1195,10 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc) mc->vram_end, mc->real_vram_size >> 20); } else { u64 base = 0; - if (rdev->flags & RADEON_IS_IGP) - base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24; + if (rdev->flags & RADEON_IS_IGP) { + base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF; + base <<= 24; + } radeon_vram_location(rdev, &rdev->mc, base); rdev->mc.gtt_base_align = 0; radeon_gtt_location(rdev, mc); -- cgit v1.2.3-70-g09d2 From 599bbb9de0fe9c494a223a34d790b353ad4d69f8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 6 Dec 2010 12:42:46 +1000 Subject: drm/i915: i915 cannot provide switcher services. it has a DSM but the switcher is done via WMI. Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_acpi.c | 34 ---------------------------------- 1 file changed, 34 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c index 65c88f9ba12..2cb8e0b9f1e 100644 --- a/drivers/gpu/drm/i915/intel_acpi.c +++ b/drivers/gpu/drm/i915/intel_acpi.c @@ -190,37 +190,6 @@ out: kfree(output.pointer); } -static int intel_dsm_switchto(enum vga_switcheroo_client_id id) -{ - return 0; -} - -static int intel_dsm_power_state(enum vga_switcheroo_client_id id, - enum vga_switcheroo_state state) -{ - return 0; -} - -static int intel_dsm_init(void) -{ - return 0; -} - -static int intel_dsm_get_client_id(struct pci_dev *pdev) -{ - if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev)) - return VGA_SWITCHEROO_IGD; - else - return VGA_SWITCHEROO_DIS; -} - -static struct vga_switcheroo_handler intel_dsm_handler = { - .switchto = intel_dsm_switchto, - .power_state = intel_dsm_power_state, - .init = intel_dsm_init, - .get_client_id = intel_dsm_get_client_id, -}; - static bool intel_dsm_pci_probe(struct pci_dev *pdev) { acpi_handle dhandle, intel_handle; @@ -276,11 +245,8 @@ void intel_register_dsm_handler(void) { if (!intel_dsm_detect()) return; - - vga_switcheroo_register_handler(&intel_dsm_handler); } void intel_unregister_dsm_handler(void) { - vga_switcheroo_unregister_handler(); } -- cgit v1.2.3-70-g09d2