From 0f1be51c358f740fe5183bd0bcd60076fdfb53d0 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 4 Dec 2014 09:41:43 +0530 Subject: thermal: cpu_cooling: check for the readiness of cpufreq layer In this patch, the cpu_cooling code checks for the usability of cpufreq layer before proceeding with the CPU cooling device registration. The main reason is: CPU cooling device is not usable if cpufreq cannot switch frequencies. Similar checks are spread in thermal drivers. Thus, the advantage now is to have the check in a single place: cpu cooling device registration. For this reason, this patch also updates the existing drivers that depend on CPU cooling to simply propagate the error code of the cpu cooling registration call. Therefore, in case cpufreq is not ready, the thermal drivers will still return -EPROBE_DEFER, in an attempt to try again when cpufreq layer gets ready. Cc: devicetree@vger.kernel.org Cc: Grant Likely Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Naveen Krishna Chatradhi Cc: Rob Herring Cc: Zhang Rui Acked-by: Viresh Kumar Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 5 +++++ drivers/thermal/db8500_cpufreq_cooling.c | 5 ----- drivers/thermal/imx_thermal.c | 5 ----- drivers/thermal/samsung/exynos_thermal_common.c | 8 +++++--- drivers/thermal/samsung/exynos_tmu.c | 5 ++++- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 ------ 6 files changed, 14 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index ad09e51ffae..f98a763af2f 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -443,6 +443,11 @@ __cpufreq_cooling_register(struct device_node *np, int ret = 0, i; struct cpufreq_policy policy; + if (!cpufreq_frequency_get_table(cpumask_first(clip_cpus))) { + pr_debug("%s: CPUFreq table not found\n", __func__); + return ERR_PTR(-EPROBE_DEFER); + } + /* Verify that all the clip cpus have same freq_min, freq_max limit */ for_each_cpu(i, clip_cpus) { /* continue if cpufreq policy not found and not return error */ diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c index 786d19263ab..1ac7ec651c3 100644 --- a/drivers/thermal/db8500_cpufreq_cooling.c +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -18,7 +18,6 @@ */ #include -#include #include #include #include @@ -30,10 +29,6 @@ static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) struct thermal_cooling_device *cdev; struct cpumask mask_val; - /* make sure cpufreq driver has been initialized */ - if (!cpufreq_frequency_get_table(0)) - return -EPROBE_DEFER; - cpumask_set_cpu(0, &mask_val); cdev = cpufreq_cooling_register(&mask_val); diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 5a1f1070b70..16405b4848f 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -9,7 +9,6 @@ #include #include -#include #include #include #include @@ -459,10 +458,6 @@ static int imx_thermal_probe(struct platform_device *pdev) int measure_freq; int ret; - if (!cpufreq_get_current_driver()) { - dev_dbg(&pdev->dev, "no cpufreq driver!"); - return -EPROBE_DEFER; - } data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index b6be572704a..50a1f17c622 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -371,9 +371,11 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) th_zone->cool_dev[th_zone->cool_dev_size] = cpufreq_cooling_register(&mask_val); if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) { - dev_err(sensor_conf->dev, - "Failed to register cpufreq cooling device\n"); - ret = -EINVAL; + ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]); + if (ret != -EPROBE_DEFER) + dev_err(sensor_conf->dev, + "Failed to register cpufreq cooling device: %d\n", + ret); goto err_unregister; } th_zone->cool_dev_size++; diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index 49c09243fd3..2afca9bf40d 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -683,7 +683,10 @@ static int exynos_tmu_probe(struct platform_device *pdev) /* Register the sensor with thermal management interface */ ret = exynos_register_thermal(sensor_conf); if (ret) { - dev_err(&pdev->dev, "Failed to register thermal interface\n"); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to register thermal interface: %d\n", + ret); goto err_clk; } data->reg_conf = sensor_conf; diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 9eec26dc044..5f07d7e3a19 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include #include @@ -403,11 +402,6 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) if (!data) return -EINVAL; - if (!cpufreq_get_current_driver()) { - dev_dbg(bgp->dev, "no cpufreq driver yet\n"); - return -EPROBE_DEFER; - } - /* Register cooling device */ data->cool_dev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(data->cool_dev)) { -- cgit v1.2.3-70-g09d2 From b45257b10d7cc21ed0393f31e1f8ac6cdde9fa18 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:44 +0530 Subject: thermal: db8500: pass cpu_present_mask to cpufreq_cooling_register() cpufreq_cooling_register() expects mask of all the CPUs where frequency constraint is applicable. This platform has more than one CPU to which these constraints will apply and so passing mask of only CPU0 wouldn't be sufficient. Also, this platform has a single cluster of CPUs and the constraint applies to all CPUs. If CPU0 is hoplugged out then we may face strange BUGs as cpu_cooling framework isn't aware of any siblings sharing clock line. Fix it by passing cpu_present_mask to cpufreq_cooling_register(). Cc: Hongbo Zhang Cc: Linus Walleij Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/db8500_cpufreq_cooling.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c index 1ac7ec651c3..3cc3dd998e6 100644 --- a/drivers/thermal/db8500_cpufreq_cooling.c +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -27,11 +27,8 @@ static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) { struct thermal_cooling_device *cdev; - struct cpumask mask_val; - - cpumask_set_cpu(0, &mask_val); - cdev = cpufreq_cooling_register(&mask_val); + cdev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(cdev)) { dev_err(&pdev->dev, "Failed to register cooling device\n"); return PTR_ERR(cdev); -- cgit v1.2.3-70-g09d2 From bec85d2e0c9f71cab57614ab05057840bb7c422f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:45 +0530 Subject: thermal: imx: pass cpu_present_mask to cpufreq_cooling_register() cpufreq_cooling_register() expects mask of all the CPUs where frequency constraint is applicable. This platform has more than one CPU to which these constraints will apply and so passing mask of only CPU0 wouldn't be sufficient. Also, this platform has a single cluster of CPUs and the constraint applies to all CPUs. If CPU0 is hoplugged out then we may face strange BUGs as cpu_cooling framework isn't aware of any siblings sharing clock line. Fix it by passing cpu_present_mask to cpufreq_cooling_register(). Cc: Shawn Guo Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/imx_thermal.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 16405b4848f..d80e36eb966 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -453,7 +453,6 @@ static int imx_thermal_probe(struct platform_device *pdev) const struct of_device_id *of_id = of_match_device(of_imx_thermal_match, &pdev->dev); struct imx_thermal_data *data; - struct cpumask clip_cpus; struct regmap *map; int measure_freq; int ret; @@ -511,8 +510,7 @@ static int imx_thermal_probe(struct platform_device *pdev) regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); - cpumask_set_cpu(0, &clip_cpus); - data->cdev = cpufreq_cooling_register(&clip_cpus); + data->cdev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(data->cdev)) { ret = PTR_ERR(data->cdev); dev_err(&pdev->dev, -- cgit v1.2.3-70-g09d2 From f3764e6c187b2841971d6347f81acc1a5264a92f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:46 +0530 Subject: thermal: exynos: pass cpu_present_mask to cpufreq_cooling_register() cpufreq_cooling_register() expects mask of all the CPUs where frequency constraint is applicable. This platform has more than one CPU to which these constraints will apply and so passing mask of only CPU0 wouldn't be sufficient. Also, this platform has a single cluster of CPUs and the constraint applies to all CPUs. If CPU0 is hoplugged out then we may face strange BUGs as cpu_cooling framework isn't aware of any siblings sharing clock line. Fix it by passing cpu_present_mask to cpufreq_cooling_register(). Cc: Chanwoo Choi Cc: Kyungmin Park Cc: Amit Daniel Kachhap Cc: Lukasz Majewski Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/exynos_thermal_common.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index 50a1f17c622..6dc3815cc73 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -347,7 +347,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf) int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { int ret; - struct cpumask mask_val; struct exynos_thermal_zone *th_zone; if (!sensor_conf || !sensor_conf->read_temperature) { @@ -367,9 +366,8 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) * sensor */ if (sensor_conf->cooling_data.freq_clip_count > 0) { - cpumask_set_cpu(0, &mask_val); th_zone->cool_dev[th_zone->cool_dev_size] = - cpufreq_cooling_register(&mask_val); + cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(th_zone->cool_dev[th_zone->cool_dev_size])) { ret = PTR_ERR(th_zone->cool_dev[th_zone->cool_dev_size]); if (ret != -EPROBE_DEFER) -- cgit v1.2.3-70-g09d2 From 728c03c9592198717fed3e9fbae7260cff300175 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:47 +0530 Subject: thermal: cpu_cooling: random comment fixups s/give/given Acked-by: Eduardo Valentin Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index f98a763af2f..6f2d41e7a9e 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -121,7 +121,7 @@ enum cpufreq_cooling_property { }; /** - * get_property - fetch a property of interest for a give cpu. + * get_property - fetch a property of interest for a given cpu. * @cpu: cpu for which the property is required * @input: query parameter * @output: query return @@ -131,6 +131,7 @@ enum cpufreq_cooling_property { * 1. get maximum cpu cooling states * 2. translate frequency to cooling state * 3. translate cooling state to frequency + * * Note that the code may be not in good shape * but it is written in this way in order to: * a) reduce duplicate code as most of the code can be shared. @@ -211,7 +212,7 @@ static int get_property(unsigned int cpu, unsigned long input, } /** - * cpufreq_cooling_get_level - for a give cpu, return the cooling level. + * cpufreq_cooling_get_level - for a given cpu, return the cooling level. * @cpu: cpu for which the level is required * @freq: the frequency of interest * -- cgit v1.2.3-70-g09d2 From beca6053fc21bbe0ed0242a3f79c0cca5749a90f Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:48 +0530 Subject: thermal: cpu_cooling: fix doc comment over struct cpufreq_cooling_device cooling_cpufreq_lock isn't used to protect this structure and so the comment over it is outdated. Fix it. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 6f2d41e7a9e..cc10641be11 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -40,9 +40,8 @@ * frequency. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * - * This structure is required for keeping information of each - * cpufreq_cooling_device registered. In order to prevent corruption of this a - * mutex lock cooling_cpufreq_lock is used. + * This structure is required for keeping information of each registered + * cpufreq_cooling_device. */ struct cpufreq_cooling_device { int id; -- cgit v1.2.3-70-g09d2 From 07d888d831b038c01c5415f8945f41c743f49fb2 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:49 +0530 Subject: thermal: cpu_cooling: Add comment to clarify relation between cooling state and frequency This wasn't explained well anywhere and should be clearly specified. Lets add a top level comment for this. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index cc10641be11..a5a931726ae 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -28,6 +28,20 @@ #include #include +/* + * Cooling state <-> CPUFreq frequency + * + * Cooling states are translated to frequencies throughout this driver and this + * is the relation between them. + * + * Highest cooling state corresponds to lowest possible frequency. + * + * i.e. + * level 0 --> 1st Max Freq + * level 1 --> 2nd Max Freq + * ... + */ + /** * struct cpufreq_cooling_device - data for cooling device with cpufreq * @id: unique integer value corresponding to each cpufreq_cooling_device -- cgit v1.2.3-70-g09d2 From 98d522f056568007557867d53833770dee9d8fe8 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:50 +0530 Subject: thermal: cpu_cooling: Pass variable instead of its type to sizeof() Just following coding guidelines here. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index a5a931726ae..537856127f7 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -476,8 +476,7 @@ __cpufreq_cooling_register(struct device_node *np, return ERR_PTR(-EINVAL); } } - cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device), - GFP_KERNEL); + cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL); if (!cpufreq_dev) return ERR_PTR(-ENOMEM); -- cgit v1.2.3-70-g09d2 From 92e615ec82c0314fb480eeb19396f4ac15bf97ef Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:51 +0530 Subject: thermal: cpu_cooling: no need to set cpufreq_state to zero Its already zero, we allocated cpufreq_dev with kzalloc. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 537856127f7..30e2ecbb75a 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -499,7 +499,7 @@ __cpufreq_cooling_register(struct device_node *np, return cool_dev; } cpufreq_dev->cool_dev = cool_dev; - cpufreq_dev->cpufreq_state = 0; + mutex_lock(&cooling_cpufreq_lock); /* Register the notifier for first cpufreq cooling device */ -- cgit v1.2.3-70-g09d2 From 5d3bdb8998e066fe270f2f71db7163d5ac40d989 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:52 +0530 Subject: thermal: cpu_cooling: no need to set cpufreq_dev to NULL It will be overwritten soon with return value of kzalloc(). Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 30e2ecbb75a..c144493e940 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -451,7 +451,7 @@ __cpufreq_cooling_register(struct device_node *np, const struct cpumask *clip_cpus) { struct thermal_cooling_device *cool_dev; - struct cpufreq_cooling_device *cpufreq_dev = NULL; + struct cpufreq_cooling_device *cpufreq_dev; unsigned int min = 0, max = 0; char dev_name[THERMAL_NAME_LENGTH]; int ret = 0, i; -- cgit v1.2.3-70-g09d2 From 8e54d442fe3cdd1ffe5f563ee843b4d48e14ef6e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:53 +0530 Subject: thermal: cpu_cooling: no need to initialze 'ret' ret is initialized before it is used, so no need to set it to 0 in its declaration. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index c144493e940..d57b8bb7d42 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -454,7 +454,7 @@ __cpufreq_cooling_register(struct device_node *np, struct cpufreq_cooling_device *cpufreq_dev; unsigned int min = 0, max = 0; char dev_name[THERMAL_NAME_LENGTH]; - int ret = 0, i; + int ret, i; struct cpufreq_policy policy; if (!cpufreq_frequency_get_table(cpumask_first(clip_cpus))) { -- cgit v1.2.3-70-g09d2 From 268ac445ee1b2b7c2806e7a21076e6d94aca1ca3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:54 +0530 Subject: thermal: cpu_cooling: propagate error returned by idr_alloc() We aren't supposed to return our own error type here. Return what we got. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index d57b8bb7d42..5c9a2efeec2 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -485,7 +485,7 @@ __cpufreq_cooling_register(struct device_node *np, ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { kfree(cpufreq_dev); - return ERR_PTR(-EINVAL); + return ERR_PTR(ret); } snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", -- cgit v1.2.3-70-g09d2 From 405fb8256226ad68cf6ba5172d289a70cb447c81 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:55 +0530 Subject: thermal: cpu_cooling: Don't match min/max frequencies for all CPUs on cooling register In __cpufreq_cooling_register() we try to match min/max frequencies for all CPUs passed in 'clip_cpus' mask. This mask is the cpumask of cpus where the frequency constraints will be applied. Same frequency constraint can be applied only to the CPUs belonging to the same cluster (i.e. CPUs sharing clock line). For all such CPUs we have a single 'struct cpufreq_policy' structure managing them and so getting policies for all CPUs wouldn't make any sense as they will all return the same pointer. So, remove this useless check of checking min/max for all CPUs. Also update doc comment to make this more obvious that clip_cpus should be same as policy->related_cpus. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 5c9a2efeec2..f32573818db 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -437,6 +437,7 @@ static struct notifier_block thermal_cpufreq_notifier_block = { * __cpufreq_cooling_register - helper function to create cpufreq cooling device * @np: a valid struct device_node to the cooling device device tree node * @clip_cpus: cpumask of cpus where the frequency constraints will happen. + * Normally this should be same as cpufreq policy->related_cpus. * * This interface function registers the cpufreq cooling device with the name * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq @@ -452,30 +453,14 @@ __cpufreq_cooling_register(struct device_node *np, { struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev; - unsigned int min = 0, max = 0; char dev_name[THERMAL_NAME_LENGTH]; - int ret, i; - struct cpufreq_policy policy; + int ret; if (!cpufreq_frequency_get_table(cpumask_first(clip_cpus))) { pr_debug("%s: CPUFreq table not found\n", __func__); return ERR_PTR(-EPROBE_DEFER); } - /* Verify that all the clip cpus have same freq_min, freq_max limit */ - for_each_cpu(i, clip_cpus) { - /* continue if cpufreq policy not found and not return error */ - if (!cpufreq_get_policy(&policy, i)) - continue; - if (min == 0 && max == 0) { - min = policy.cpuinfo.min_freq; - max = policy.cpuinfo.max_freq; - } else { - if (min != policy.cpuinfo.min_freq || - max != policy.cpuinfo.max_freq) - return ERR_PTR(-EINVAL); - } - } cpufreq_dev = kzalloc(sizeof(*cpufreq_dev), GFP_KERNEL); if (!cpufreq_dev) return ERR_PTR(-ENOMEM); -- cgit v1.2.3-70-g09d2 From e1fae554fb69b8869acbea9397d15758a93d1204 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:56 +0530 Subject: thermal: cpu_cooling: don't iterate over all allowed_cpus to update cpufreq policy All CPUs present in 'allowed_cpus' share the same 'struct cpufreq_policy' structure and so calling cpufreq_update_policy() for each of them doesn't make sense. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index f32573818db..7f27f1b4477 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -285,11 +285,10 @@ static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, unsigned long cooling_state) { - unsigned int cpuid, clip_freq; + unsigned int clip_freq; struct cpumask *mask = &cpufreq_device->allowed_cpus; unsigned int cpu = cpumask_any(mask); - /* Check if the old cooling action is same as new cooling action */ if (cpufreq_device->cpufreq_state == cooling_state) return 0; @@ -301,10 +300,8 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, cpufreq_device->cpufreq_state = cooling_state; cpufreq_device->cpufreq_val = clip_freq; - for_each_cpu(cpuid, mask) { - if (is_cpufreq_valid(cpuid)) - cpufreq_update_policy(cpuid); - } + if (is_cpufreq_valid(cpu)) + cpufreq_update_policy(cpu); return 0; } -- cgit v1.2.3-70-g09d2 From c9ca319f0579cd51b07a666683157233c2cf720d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:57 +0530 Subject: thermal: cpu_cooling: Don't check is_cpufreq_valid() Because get_cpu_frequency() has returned a valid frequency, it means that the cpufreq policy is surely valid and so no point checking that again with is_cpufreq_valid(). Get rid of the routine as well as there are no more users. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 7f27f1b4477..1dd4cc403a2 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -110,23 +110,6 @@ static void release_idr(struct idr *idr, int id) /* Below code defines functions to be used for cpufreq as cooling device */ -/** - * is_cpufreq_valid - function to check frequency transitioning capability. - * @cpu: cpu for which check is needed. - * - * This function will check the current state of the system if - * it is capable of changing the frequency for a given @cpu. - * - * Return: 0 if the system is not currently capable of changing - * the frequency of given cpu. !0 in case the frequency is changeable. - */ -static int is_cpufreq_valid(int cpu) -{ - struct cpufreq_policy policy; - - return !cpufreq_get_policy(&policy, cpu); -} - enum cpufreq_cooling_property { GET_LEVEL, GET_FREQ, @@ -300,8 +283,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, cpufreq_device->cpufreq_state = cooling_state; cpufreq_device->cpufreq_val = clip_freq; - if (is_cpufreq_valid(cpu)) - cpufreq_update_policy(cpu); + cpufreq_update_policy(cpu); return 0; } -- cgit v1.2.3-70-g09d2 From 730abe064b6f8860302b75a689ceed059c08e0b1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:58 +0530 Subject: thermal: cpu_cooling: do error handling at the bottom in __cpufreq_cooling_register() This makes life easy and bug free. And is scalable for future resource allocations. Acked-by: Javi Merino Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 1dd4cc403a2..491d90aeeeb 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -448,8 +448,8 @@ __cpufreq_cooling_register(struct device_node *np, ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { - kfree(cpufreq_dev); - return ERR_PTR(ret); + cool_dev = ERR_PTR(ret); + goto free_cdev; } snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", @@ -457,11 +457,9 @@ __cpufreq_cooling_register(struct device_node *np, cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, &cpufreq_cooling_ops); - if (IS_ERR(cool_dev)) { - release_idr(&cpufreq_idr, cpufreq_dev->id); - kfree(cpufreq_dev); - return cool_dev; - } + if (IS_ERR(cool_dev)) + goto remove_idr; + cpufreq_dev->cool_dev = cool_dev; mutex_lock(&cooling_cpufreq_lock); @@ -475,6 +473,13 @@ __cpufreq_cooling_register(struct device_node *np, mutex_unlock(&cooling_cpufreq_lock); + return cool_dev; + +remove_idr: + release_idr(&cpufreq_idr, cpufreq_dev->id); +free_cdev: + kfree(cpufreq_dev); + return cool_dev; } -- cgit v1.2.3-70-g09d2 From 7adb635b3cd790e4e0d7e9d0b3dd30574ae36596 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:41:59 +0530 Subject: thermal: cpu_cooling: initialize 'cpufreq_val' on registration There is no point checking for validity of 'cpufreq_val' from cpufreq_thermal_notifier() every time the routine is called. Its guaranteed to be 0 on the first call but will be valid otherwise. Lets update it once while the device registers. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 491d90aeeeb..86bcf8dc14d 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -316,11 +316,6 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, &cpufreq_dev->allowed_cpus)) continue; - if (!cpufreq_dev->cpufreq_val) - cpufreq_dev->cpufreq_val = get_cpu_frequency( - cpumask_any(&cpufreq_dev->allowed_cpus), - cpufreq_dev->cpufreq_state); - max_freq = cpufreq_dev->cpufreq_val; if (policy->max != max_freq) @@ -444,6 +439,13 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); + cpufreq_dev->cpufreq_val = get_cpu_frequency(cpumask_any(clip_cpus), 0); + if (!cpufreq_dev->cpufreq_val) { + pr_err("%s: Failed to get frequency", __func__); + cool_dev = ERR_PTR(-EINVAL); + goto free_cdev; + } + cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); -- cgit v1.2.3-70-g09d2 From 5194fe469927e50367b35e556812c7fc6ce130d1 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:00 +0530 Subject: thermal: cpu_cooling: Merge cpufreq_apply_cooling() into cpufreq_set_cur_state() cpufreq_apply_cooling() has a single caller, cpufreq_set_cur_state() and cpufreq_set_cur_state() is an unnecessary wrapper over cpufreq_apply_cooling(). Get rid of it by merging both routines. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 52 +++++++++++++------------------------------ 1 file changed, 16 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 86bcf8dc14d..a3dd74f5754 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -253,41 +253,6 @@ static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) return freq; } -/** - * cpufreq_apply_cooling - function to apply frequency clipping. - * @cpufreq_device: cpufreq_cooling_device pointer containing frequency - * clipping data. - * @cooling_state: value of the cooling state. - * - * Function used to make sure the cpufreq layer is aware of current thermal - * limits. The limits are applied by updating the cpufreq policy. - * - * Return: 0 on success, an error code otherwise (-EINVAL in case wrong - * cooling state). - */ -static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, - unsigned long cooling_state) -{ - unsigned int clip_freq; - struct cpumask *mask = &cpufreq_device->allowed_cpus; - unsigned int cpu = cpumask_any(mask); - - /* Check if the old cooling action is same as new cooling action */ - if (cpufreq_device->cpufreq_state == cooling_state) - return 0; - - clip_freq = get_cpu_frequency(cpu, cooling_state); - if (!clip_freq) - return -EINVAL; - - cpufreq_device->cpufreq_state = cooling_state; - cpufreq_device->cpufreq_val = clip_freq; - - cpufreq_update_policy(cpu); - - return 0; -} - /** * cpufreq_thermal_notifier - notifier callback for cpufreq policy change. * @nb: struct notifier_block * with callback info. @@ -391,8 +356,23 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) { struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; + unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus); + unsigned int clip_freq; + + /* Check if the old cooling action is same as new cooling action */ + if (cpufreq_device->cpufreq_state == state) + return 0; - return cpufreq_apply_cooling(cpufreq_device, state); + clip_freq = get_cpu_frequency(cpu, state); + if (!clip_freq) + return -EINVAL; + + cpufreq_device->cpufreq_state = state; + cpufreq_device->cpufreq_val = clip_freq; + + cpufreq_update_policy(cpu); + + return 0; } /* Bind cpufreq callbacks to thermal cooling device ops */ -- cgit v1.2.3-70-g09d2 From 521a2e5831704efef8aa826d6b22abef55650d59 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:01 +0530 Subject: thermal: cpu_cooling: remove unnecessary wrapper get_cpu_frequency() get_cpu_frequency() isn't doing much by itself, just calling get_property(). And so this wrapper isn't required at all. Get rid of it. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 40 +++++++++------------------------------- 1 file changed, 9 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index a3dd74f5754..2c4c4853cd9 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -229,30 +229,6 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) } EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level); -/** - * get_cpu_frequency - get the absolute value of frequency from level. - * @cpu: cpu for which frequency is fetched. - * @level: cooling level - * - * This function matches cooling level with frequency. Based on a cooling level - * of frequency, equals cooling state of cpu cooling device, it will return - * the corresponding frequency. - * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc - * - * Return: 0 on error, the corresponding frequency otherwise. - */ -static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level) -{ - int ret = 0; - unsigned int freq; - - ret = get_property(cpu, level, &freq, GET_FREQ); - if (ret) - return 0; - - return freq; -} - /** * cpufreq_thermal_notifier - notifier callback for cpufreq policy change. * @nb: struct notifier_block * with callback info. @@ -358,14 +334,15 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus); unsigned int clip_freq; + int ret; /* Check if the old cooling action is same as new cooling action */ if (cpufreq_device->cpufreq_state == state) return 0; - clip_freq = get_cpu_frequency(cpu, state); - if (!clip_freq) - return -EINVAL; + ret = get_property(cpu, state, &clip_freq, GET_FREQ); + if (ret) + return ret; cpufreq_device->cpufreq_state = state; cpufreq_device->cpufreq_val = clip_freq; @@ -419,10 +396,11 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); - cpufreq_dev->cpufreq_val = get_cpu_frequency(cpumask_any(clip_cpus), 0); - if (!cpufreq_dev->cpufreq_val) { - pr_err("%s: Failed to get frequency", __func__); - cool_dev = ERR_PTR(-EINVAL); + ret = get_property(cpumask_any(clip_cpus), 0, &cpufreq_dev->cpufreq_val, + GET_FREQ); + if (ret) { + pr_err("%s: Failed to get frequency: %d", __func__, ret); + cool_dev = ERR_PTR(ret); goto free_cdev; } -- cgit v1.2.3-70-g09d2 From dcc6c7fdef9e705b1300be22213fb23e3fd1994d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:02 +0530 Subject: thermal: cpu_cooling: find max level during device registration CPU frequency tables don't update after the driver is registered and so we don't need to iterate over them to find total number of states every time cpufreq_get_max_state() is called. Do it once at boot time. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 2c4c4853cd9..d34cc5b2702 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -52,6 +52,8 @@ * cooling devices. * @cpufreq_val: integer value representing the absolute value of the clipped * frequency. + * @max_level: maximum cooling level. One less than total number of valid + * cpufreq frequencies. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. * * This structure is required for keeping information of each registered @@ -62,6 +64,7 @@ struct cpufreq_cooling_device { struct thermal_cooling_device *cool_dev; unsigned int cpufreq_state; unsigned int cpufreq_val; + unsigned int max_level; struct cpumask allowed_cpus; struct list_head node; }; @@ -283,19 +286,9 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; - struct cpumask *mask = &cpufreq_device->allowed_cpus; - unsigned int cpu; - unsigned int count = 0; - int ret; - - cpu = cpumask_any(mask); - - ret = get_property(cpu, 0, &count, GET_MAXL); - - if (count > 0) - *state = count; - return ret; + *state = cpufreq_device->max_level; + return 0; } /** @@ -385,9 +378,11 @@ __cpufreq_cooling_register(struct device_node *np, struct thermal_cooling_device *cool_dev; struct cpufreq_cooling_device *cpufreq_dev; char dev_name[THERMAL_NAME_LENGTH]; + struct cpufreq_frequency_table *pos, *table; int ret; - if (!cpufreq_frequency_get_table(cpumask_first(clip_cpus))) { + table = cpufreq_frequency_get_table(cpumask_first(clip_cpus)); + if (!table) { pr_debug("%s: CPUFreq table not found\n", __func__); return ERR_PTR(-EPROBE_DEFER); } @@ -404,6 +399,13 @@ __cpufreq_cooling_register(struct device_node *np, goto free_cdev; } + /* Find max levels */ + cpufreq_for_each_valid_entry(pos, table) + cpufreq_dev->max_level++; + + /* max_level is an index, not a counter */ + cpufreq_dev->max_level--; + cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); -- cgit v1.2.3-70-g09d2 From 97afa4aafb821eca197f678b6552488c46f8c48e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:03 +0530 Subject: thermal: cpu_cooling: get_property() doesn't need to support GET_MAXL anymore We don't use get_property() to find max levels anymore as it is done at boot now. So, don't support GET_MAXL in get_property(). Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index d34cc5b2702..d2e6f845fe7 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -116,7 +116,6 @@ static void release_idr(struct idr *idr, int id) enum cpufreq_cooling_property { GET_LEVEL, GET_FREQ, - GET_MAXL, }; /** @@ -124,12 +123,11 @@ enum cpufreq_cooling_property { * @cpu: cpu for which the property is required * @input: query parameter * @output: query return - * @property: type of query (frequency, level, max level) + * @property: type of query (frequency, level) * * This is the common function to - * 1. get maximum cpu cooling states - * 2. translate frequency to cooling state - * 3. translate cooling state to frequency + * 1. translate frequency to cooling state + * 2. translate cooling state to frequency * * Note that the code may be not in good shape * but it is written in this way in order to: @@ -176,12 +174,6 @@ static int get_property(unsigned int cpu, unsigned long input, /* max_level is an index, not a counter */ max_level--; - /* get max level */ - if (property == GET_MAXL) { - *output = (unsigned int)max_level; - return 0; - } - if (property == GET_FREQ) level = descend ? input : (max_level - input); -- cgit v1.2.3-70-g09d2 From 2479bb6443d6a793f896219a34bfab0cc410f0b4 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:04 +0530 Subject: thermal: cpu_cooling: use cpufreq_dev_list instead of cpufreq_dev_count As we already have a list of cpufreq_cooling_devices now, lets use it instead of a local counter. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index d2e6f845fe7..32ff6dc5efe 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -71,8 +71,6 @@ struct cpufreq_cooling_device { static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); -static unsigned int cpufreq_dev_count; - static LIST_HEAD(cpufreq_dev_list); /** @@ -419,10 +417,9 @@ __cpufreq_cooling_register(struct device_node *np, mutex_lock(&cooling_cpufreq_lock); /* Register the notifier for first cpufreq cooling device */ - if (cpufreq_dev_count == 0) + if (list_empty(&cpufreq_dev_list)) cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); - cpufreq_dev_count++; list_add(&cpufreq_dev->node, &cpufreq_dev_list); mutex_unlock(&cooling_cpufreq_lock); @@ -495,10 +492,9 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) cpufreq_dev = cdev->devdata; mutex_lock(&cooling_cpufreq_lock); list_del(&cpufreq_dev->node); - cpufreq_dev_count--; /* Unregister the notifier for the last cpufreq cooling device */ - if (cpufreq_dev_count == 0) + if (list_empty(&cpufreq_dev_list)) cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); mutex_unlock(&cooling_cpufreq_lock); -- cgit v1.2.3-70-g09d2 From b9f8b4160310e4459c08b54b918cd83da141f7f0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:05 +0530 Subject: thermal: cpu_cooling: Pass 'cpufreq_dev' to get_property() We already know the value of 'cpufreq_dev->max_level' and so there is no need calculating that once again. For this, we need to send 'cpufreq_dev' to get_property(). Make all necessary changes for this change. Because cpufreq_cooling_get_level() doesn't have access to 'cpufreq_dev', it is updated to iterate over the list of cpufreq_cooling_devices to get cooling device for the cpu number passed to it. This also makes it robust to return levels only for the CPU registered via a cooling device. We don't have to support anything that isn't registered yet. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 50 +++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 32ff6dc5efe..7687922cb02 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -118,7 +118,7 @@ enum cpufreq_cooling_property { /** * get_property - fetch a property of interest for a given cpu. - * @cpu: cpu for which the property is required + * @cpufreq_dev: cpufreq_dev for which the property is required * @input: query parameter * @output: query return * @property: type of query (frequency, level) @@ -135,20 +135,20 @@ enum cpufreq_cooling_property { * * Return: 0 on success, -EINVAL when invalid parameters are passed. */ -static int get_property(unsigned int cpu, unsigned long input, - unsigned int *output, +static int get_property(struct cpufreq_cooling_device *cpufreq_dev, + unsigned long input, unsigned int *output, enum cpufreq_cooling_property property) { int i; - unsigned long max_level = 0, level = 0; + unsigned long level = 0; unsigned int freq = CPUFREQ_ENTRY_INVALID; int descend = -1; - struct cpufreq_frequency_table *pos, *table = - cpufreq_frequency_get_table(cpu); + struct cpufreq_frequency_table *pos, *table; if (!output) return -EINVAL; + table = cpufreq_frequency_get_table(cpumask_first(&cpufreq_dev->allowed_cpus)); if (!table) return -EINVAL; @@ -162,18 +162,10 @@ static int get_property(unsigned int cpu, unsigned long input, descend = freq > pos->frequency; freq = pos->frequency; - max_level++; } - /* No valid cpu frequency entry */ - if (max_level == 0) - return -EINVAL; - - /* max_level is an index, not a counter */ - max_level--; - if (property == GET_FREQ) - level = descend ? input : (max_level - input); + level = descend ? input : (cpufreq_dev->max_level - input); i = 0; cpufreq_for_each_valid_entry(pos, table) { @@ -186,7 +178,7 @@ static int get_property(unsigned int cpu, unsigned long input, if (property == GET_LEVEL && (unsigned int)input == freq) { /* get level by frequency */ - *output = descend ? i : (max_level - i); + *output = descend ? i : (cpufreq_dev->max_level - i); return 0; } if (property == GET_FREQ && level == i) { @@ -213,12 +205,25 @@ static int get_property(unsigned int cpu, unsigned long input, */ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) { - unsigned int val; + struct cpufreq_cooling_device *cpufreq_dev; - if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL)) - return THERMAL_CSTATE_INVALID; + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { + unsigned int val; + + mutex_unlock(&cooling_cpufreq_lock); + if (get_property(cpufreq_dev, (unsigned long)freq, &val, + GET_LEVEL)) + return THERMAL_CSTATE_INVALID; + + return (unsigned long)val; + } + } + mutex_unlock(&cooling_cpufreq_lock); - return (unsigned long)val; + pr_err("%s: cpu:%d not part of any cooling device\n", __func__, cpu); + return THERMAL_CSTATE_INVALID; } EXPORT_SYMBOL_GPL(cpufreq_cooling_get_level); @@ -323,7 +328,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, if (cpufreq_device->cpufreq_state == state) return 0; - ret = get_property(cpu, state, &clip_freq, GET_FREQ); + ret = get_property(cpufreq_device, state, &clip_freq, GET_FREQ); if (ret) return ret; @@ -381,8 +386,7 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); - ret = get_property(cpumask_any(clip_cpus), 0, &cpufreq_dev->cpufreq_val, - GET_FREQ); + ret = get_property(cpufreq_dev, 0, &cpufreq_dev->cpufreq_val, GET_FREQ); if (ret) { pr_err("%s: Failed to get frequency: %d", __func__, ret); cool_dev = ERR_PTR(ret); -- cgit v1.2.3-70-g09d2 From f6859014c7e7cc0e7688525741fc3a0e7aee63be Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:06 +0530 Subject: thermal: cpu_cooling: Store frequencies in descending order CPUFreq framework *doesn't* guarantee that frequencies present in cpufreq table will be in ascending or descending order. But cpu_cooling somehow assumes that. Probably because most of current users are creating this list from DT, which is done with the help of OPP layer. And OPP layer creates the list in ascending order of frequencies. But cpu_cooling can be used for other platforms too, which don't have frequencies arranged in any order. This patch tries to fix this issue by creating another list of valid frequencies in descending order. Care is also taken to throw warnings for duplicate entries. Later patches would use it to simplify code. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 41 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 7687922cb02..cb5a4b91418 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -65,6 +65,7 @@ struct cpufreq_cooling_device { unsigned int cpufreq_state; unsigned int cpufreq_val; unsigned int max_level; + unsigned int *freq_table; /* In descending order */ struct cpumask allowed_cpus; struct list_head node; }; @@ -352,6 +353,20 @@ static struct notifier_block thermal_cpufreq_notifier_block = { .notifier_call = cpufreq_thermal_notifier, }; +static unsigned int find_next_max(struct cpufreq_frequency_table *table, + unsigned int prev_max) +{ + struct cpufreq_frequency_table *pos; + unsigned int max = 0; + + cpufreq_for_each_valid_entry(pos, table) { + if (pos->frequency > max && pos->frequency < prev_max) + max = pos->frequency; + } + + return max; +} + /** * __cpufreq_cooling_register - helper function to create cpufreq cooling device * @np: a valid struct device_node to the cooling device device tree node @@ -374,6 +389,7 @@ __cpufreq_cooling_register(struct device_node *np, struct cpufreq_cooling_device *cpufreq_dev; char dev_name[THERMAL_NAME_LENGTH]; struct cpufreq_frequency_table *pos, *table; + unsigned int freq, i; int ret; table = cpufreq_frequency_get_table(cpumask_first(clip_cpus)); @@ -397,6 +413,14 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_for_each_valid_entry(pos, table) cpufreq_dev->max_level++; + cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) * + cpufreq_dev->max_level, GFP_KERNEL); + if (!cpufreq_dev->freq_table) { + return ERR_PTR(-ENOMEM); + cool_dev = ERR_PTR(-ENOMEM); + goto free_cdev; + } + /* max_level is an index, not a counter */ cpufreq_dev->max_level--; @@ -405,7 +429,7 @@ __cpufreq_cooling_register(struct device_node *np, ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); if (ret) { cool_dev = ERR_PTR(ret); - goto free_cdev; + goto free_table; } snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d", @@ -416,6 +440,18 @@ __cpufreq_cooling_register(struct device_node *np, if (IS_ERR(cool_dev)) goto remove_idr; + /* Fill freq-table in descending order of frequencies */ + for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) { + freq = find_next_max(table, freq); + cpufreq_dev->freq_table[i] = freq; + + /* Warn for duplicate entries */ + if (!freq) + pr_warn("%s: table has duplicate entries\n", __func__); + else + pr_debug("%s: freq:%u KHz\n", __func__, freq); + } + cpufreq_dev->cool_dev = cool_dev; mutex_lock(&cooling_cpufreq_lock); @@ -432,6 +468,8 @@ __cpufreq_cooling_register(struct device_node *np, remove_idr: release_idr(&cpufreq_idr, cpufreq_dev->id); +free_table: + kfree(cpufreq_dev->freq_table); free_cdev: kfree(cpufreq_dev); @@ -505,6 +543,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) thermal_cooling_device_unregister(cpufreq_dev->cool_dev); release_idr(&cpufreq_idr, cpufreq_dev->id); + kfree(cpufreq_dev->freq_table); kfree(cpufreq_dev); } EXPORT_SYMBOL_GPL(cpufreq_cooling_unregister); -- cgit v1.2.3-70-g09d2 From 4843c4a190495aec41c8a87365697e933dc88bc9 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:07 +0530 Subject: thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq get_property() was an over complicated beast with BUGs. It used to believe that cpufreq table is present in ascending or descending order, which might not always be true. Previous patch has created another freq table in descending order for us and we better use it now. With that get_property() simply goes away and another helper get_level() comes in. Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 108 ++++++++---------------------------------- 1 file changed, 19 insertions(+), 89 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index cb5a4b91418..cd6f6429107 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -112,85 +112,27 @@ static void release_idr(struct idr *idr, int id) /* Below code defines functions to be used for cpufreq as cooling device */ -enum cpufreq_cooling_property { - GET_LEVEL, - GET_FREQ, -}; - /** - * get_property - fetch a property of interest for a given cpu. + * get_level: Find the level for a particular frequency * @cpufreq_dev: cpufreq_dev for which the property is required - * @input: query parameter - * @output: query return - * @property: type of query (frequency, level) - * - * This is the common function to - * 1. translate frequency to cooling state - * 2. translate cooling state to frequency + * @freq: Frequency * - * Note that the code may be not in good shape - * but it is written in this way in order to: - * a) reduce duplicate code as most of the code can be shared. - * b) make sure the logic is consistent when translating between - * cooling states and frequencies. - * - * Return: 0 on success, -EINVAL when invalid parameters are passed. + * Return: level on success, THERMAL_CSTATE_INVALID on error. */ -static int get_property(struct cpufreq_cooling_device *cpufreq_dev, - unsigned long input, unsigned int *output, - enum cpufreq_cooling_property property) +static unsigned long get_level(struct cpufreq_cooling_device *cpufreq_dev, + unsigned int freq) { - int i; - unsigned long level = 0; - unsigned int freq = CPUFREQ_ENTRY_INVALID; - int descend = -1; - struct cpufreq_frequency_table *pos, *table; - - if (!output) - return -EINVAL; - - table = cpufreq_frequency_get_table(cpumask_first(&cpufreq_dev->allowed_cpus)); - if (!table) - return -EINVAL; - - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; - - /* get the frequency order */ - if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) - descend = freq > pos->frequency; - - freq = pos->frequency; - } - - if (property == GET_FREQ) - level = descend ? input : (cpufreq_dev->max_level - input); - - i = 0; - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; + unsigned long level; - /* now we have a valid frequency entry */ - freq = pos->frequency; + for (level = 0; level <= cpufreq_dev->max_level; level++) { + if (freq == cpufreq_dev->freq_table[level]) + return level; - if (property == GET_LEVEL && (unsigned int)input == freq) { - /* get level by frequency */ - *output = descend ? i : (cpufreq_dev->max_level - i); - return 0; - } - if (property == GET_FREQ && level == i) { - /* get frequency by level */ - *output = freq; - return 0; - } - i++; + if (freq > cpufreq_dev->freq_table[level]) + break; } - return -EINVAL; + return THERMAL_CSTATE_INVALID; } /** @@ -211,14 +153,8 @@ unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq) mutex_lock(&cooling_cpufreq_lock); list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { if (cpumask_test_cpu(cpu, &cpufreq_dev->allowed_cpus)) { - unsigned int val; - mutex_unlock(&cooling_cpufreq_lock); - if (get_property(cpufreq_dev, (unsigned long)freq, &val, - GET_LEVEL)) - return THERMAL_CSTATE_INVALID; - - return (unsigned long)val; + return get_level(cpufreq_dev, freq); } } mutex_unlock(&cooling_cpufreq_lock); @@ -323,16 +259,16 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, struct cpufreq_cooling_device *cpufreq_device = cdev->devdata; unsigned int cpu = cpumask_any(&cpufreq_device->allowed_cpus); unsigned int clip_freq; - int ret; + + /* Request state should be less than max_level */ + if (WARN_ON(state > cpufreq_device->max_level)) + return -EINVAL; /* Check if the old cooling action is same as new cooling action */ if (cpufreq_device->cpufreq_state == state) return 0; - ret = get_property(cpufreq_device, state, &clip_freq, GET_FREQ); - if (ret) - return ret; - + clip_freq = cpufreq_device->freq_table[state]; cpufreq_device->cpufreq_state = state; cpufreq_device->cpufreq_val = clip_freq; @@ -402,13 +338,6 @@ __cpufreq_cooling_register(struct device_node *np, if (!cpufreq_dev) return ERR_PTR(-ENOMEM); - ret = get_property(cpufreq_dev, 0, &cpufreq_dev->cpufreq_val, GET_FREQ); - if (ret) { - pr_err("%s: Failed to get frequency: %d", __func__, ret); - cool_dev = ERR_PTR(ret); - goto free_cdev; - } - /* Find max levels */ cpufreq_for_each_valid_entry(pos, table) cpufreq_dev->max_level++; @@ -452,6 +381,7 @@ __cpufreq_cooling_register(struct device_node *np, pr_debug("%s: freq:%u KHz\n", __func__, freq); } + cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0]; cpufreq_dev->cool_dev = cool_dev; mutex_lock(&cooling_cpufreq_lock); -- cgit v1.2.3-70-g09d2 From 73904cbc1a5a5143323743209257d4668fadc7f3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Dec 2014 09:42:08 +0530 Subject: thermal: cpu_cooling: update copyright tags Adding my copyright information for two purposes: - To get cc'd for future patches to review (Only if people read this header while sending mail) - Have done enough changes to earn a place here? Cc: Amit Daniel Kachhap Signed-off-by: Viresh Kumar Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index cd6f6429107..051eb4821bc 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -4,6 +4,8 @@ * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) * Copyright (C) 2012 Amit Daniel * + * Copyright (C) 2014 Viresh Kumar + * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by -- cgit v1.2.3-70-g09d2 From 9a3031dc3e7a5edfeb52ae8951f8bcd927351854 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Tue, 18 Nov 2014 11:16:30 +0100 Subject: thermal:core:fix: Check return code of the ->get_max_state() callback The return code from ->get_max_state() callback was not checked during binding cooling device to thermal zone device. Signed-off-by: Lukasz Majewski Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 43b90709585..85679295bfd 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -928,7 +928,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, struct thermal_zone_device *pos1; struct thermal_cooling_device *pos2; unsigned long max_state; - int result; + int result, ret; if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) return -EINVAL; @@ -945,7 +945,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (tz != pos1 || cdev != pos2) return -EINVAL; - cdev->ops->get_max_state(cdev, &max_state); + ret = cdev->ops->get_max_state(cdev, &max_state); + if (ret) + return ret; /* lower default 0, upper default max_state */ lower = lower == THERMAL_NO_LIMIT ? 0 : lower; -- cgit v1.2.3-70-g09d2 From fcbb1e02ee540e1875137d36259017f91b95c30c Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Tue, 2 Dec 2014 12:04:32 +0530 Subject: drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung As samsung thermal support is enabled only for ARCH_EXYNOS, there is no need to select ARCH_HAS_BANDGAP from the arch-specific code. Removing this dependency will also allow the driver to be enabled on 64-bit SoCs. Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Lukasz Majewski Acked-by: Lukasz Majewski Signed-off-by: Abhilash Kesavan Signed-off-by: Eduardo Valentin --- drivers/thermal/samsung/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig index f760389a204..c43306ecc0a 100644 --- a/drivers/thermal/samsung/Kconfig +++ b/drivers/thermal/samsung/Kconfig @@ -1,6 +1,6 @@ config EXYNOS_THERMAL tristate "Exynos thermal management unit driver" - depends on ARCH_HAS_BANDGAP && OF + depends on OF help If you say yes here you get support for the TMU (Thermal Management Unit) driver for SAMSUNG EXYNOS series of SoCs. This driver initialises -- cgit v1.2.3-70-g09d2 From 1222d8fe578cd28a6c7f5e4e6c6b664c56abfdc0 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 11 Dec 2014 14:40:21 +0100 Subject: regulator: s2mps11: Fix dw_mmc failure on Gear 2 Invalid buck4 configuration for linear mapping of voltage in S2MPS14 regulators caused boot failure on Gear 2 (dw_mmc-exynos): [ 3.569137] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null) [ 3.571716] VFS: Mounted root (ext4 filesystem) readonly on device 179:15. [ 3.629842] mmcblk0: error -110 sending status command, retrying [ 3.630244] mmcblk0: error -110 sending status command, retrying [ 3.636292] mmcblk0: error -110 sending status command, aborting Buck4 voltage regulator has different minimal voltage value than other bucks. Commit merging multiple regulator description macros caused to use linear_min_sel from buck[1235] regulators as value for buck4. This lead to lower voltage of buck4 than required. Output of the buck4 is used internally as power source for LDO{3,4,7,11,19,20,21,23}. On Gear 2 board LDO11 is used as MMC regulator (V_EMMC_1.8V). Fixes: 5a867cf28893 ("regulator: s2mps11: Optimize the regulator description macro") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown Cc: --- drivers/regulator/s2mps11.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index adab82d5279..697be114e21 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -479,7 +479,7 @@ static struct regulator_ops s2mps14_reg_ops = { .enable_mask = S2MPS14_ENABLE_MASK \ } -#define regulator_desc_s2mps14_buck(num, min, step) { \ +#define regulator_desc_s2mps14_buck(num, min, step, min_sel) { \ .name = "BUCK"#num, \ .id = S2MPS14_BUCK##num, \ .ops = &s2mps14_reg_ops, \ @@ -488,7 +488,7 @@ static struct regulator_ops s2mps14_reg_ops = { .min_uV = min, \ .uV_step = step, \ .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \ - .linear_min_sel = S2MPS14_BUCK1235_START_SEL, \ + .linear_min_sel = min_sel, \ .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \ .vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \ .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \ @@ -522,11 +522,16 @@ static const struct regulator_desc s2mps14_regulators[] = { regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV), regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV), regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV), - regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV), - regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV), - regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV), + regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV, + S2MPS14_BUCK1235_START_SEL), + regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV, + S2MPS14_BUCK1235_START_SEL), + regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV, + S2MPS14_BUCK1235_START_SEL), + regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV, + S2MPS14_BUCK4_START_SEL), + regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV, + S2MPS14_BUCK1235_START_SEL), }; static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11, -- cgit v1.2.3-70-g09d2 From 412aff9497ea55f30b1ae54df918d0aa4d7d8a4b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 11 Dec 2014 19:11:40 -0200 Subject: thermal: imx: Do not print error message in the EPROBE_DEFER case During imx_thermal probe we have the following log: [ 1.514819] imx_thermal 2000000.aips-bus:tempmon: failed to register cpufreq cooling device: -517 [ 1.515064] platform 2000000.aips-bus:tempmon: Driver imx_thermal requests probe deferral Avoid printing the error message in the EPROBE_DEFER case. Signed-off-by: Fabio Estevam Signed-off-by: Eduardo Valentin --- drivers/thermal/imx_thermal.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index d80e36eb966..f94062bd78e 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -513,8 +513,10 @@ static int imx_thermal_probe(struct platform_device *pdev) data->cdev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(data->cdev)) { ret = PTR_ERR(data->cdev); - dev_err(&pdev->dev, - "failed to register cpufreq cooling device: %d\n", ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to register cpufreq cooling device: %d\n", + ret); return ret; } -- cgit v1.2.3-70-g09d2 From 38cbf0414ce9f3403fd0a8f508117cb637d693db Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Fri, 12 Dec 2014 09:58:29 -0400 Subject: thermal: db8500: Do not print error message in the EPROBE_DEFER case Avoid printing the error message in the EPROBE_DEFER case where registering cpu cooling at db8500 thermal driver. Cc: Zhang Rui Cc: Grant Likely Cc: Rob Herring Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Eduardo Valentin --- drivers/thermal/db8500_cpufreq_cooling.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c index 3cc3dd998e6..28bbff97f3d 100644 --- a/drivers/thermal/db8500_cpufreq_cooling.c +++ b/drivers/thermal/db8500_cpufreq_cooling.c @@ -30,8 +30,14 @@ static int db8500_cpufreq_cooling_probe(struct platform_device *pdev) cdev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(cdev)) { - dev_err(&pdev->dev, "Failed to register cooling device\n"); - return PTR_ERR(cdev); + int ret = PTR_ERR(cdev); + + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "Failed to register cooling device %d\n", + ret); + + return ret; } platform_set_drvdata(pdev, cdev); -- cgit v1.2.3-70-g09d2 From cffafc3247356088babff01201478c3c7adaef3f Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Fri, 12 Dec 2014 10:05:39 -0400 Subject: thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case Avoid printing the error message in the EPROBE_DEFER case where registering cpu cooling at ti-soc-thermal thermal driver. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin --- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 5f07d7e3a19..096fb2141b2 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -405,9 +405,14 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) /* Register cooling device */ data->cool_dev = cpufreq_cooling_register(cpu_present_mask); if (IS_ERR(data->cool_dev)) { - dev_err(bgp->dev, - "Failed to register cpufreq cooling device\n"); - return PTR_ERR(data->cool_dev); + int ret = PTR_ERR(data->cool_dev); + + if (ret != -EPROBE_DEFER) + dev_err(bgp->dev, + "Failed to register cpu cooling device %d\n", + ret); + + return ret; } ti_bandgap_set_sensor_data(bgp, id, data); -- cgit v1.2.3-70-g09d2 From 0a79a0c011cb291675e3b80760a452fcba5c59d9 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 4 Dec 2014 10:27:20 +0200 Subject: iwlwifi: mvm: clear IN_HW_RESTART flag on stop() On stop(), we already cleared our internal state, and the restart_complete() callback won't be called, so simply clear the IN_HW_RESTART flag. Keeping the flag might result in invalid state on the next start(), preventing the driver starting properly. Additionally, don't take IWL_MVM_REF_UCODE_DOWN on stop() if hw restart was requested, as the ref was already taken in this case. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 31a5b3f4266..e880f9d4717 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1004,8 +1004,13 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) { lockdep_assert_held(&mvm->mutex); - /* disallow low power states when the FW is down */ - iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); + /* + * Disallow low power states when the FW is down by taking + * the UCODE_DOWN ref. in case of ongoing hw restart the + * ref is already taken, so don't take it again. + */ + if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) + iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); /* async_handlers_wk is now blocked */ @@ -1023,6 +1028,12 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm) /* the fw is stopped, the aux sta is dead: clean up driver state */ iwl_mvm_del_aux_sta(mvm); + /* + * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete() + * won't be called in this case). + */ + clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); + mvm->ucode_loaded = false; } -- cgit v1.2.3-70-g09d2 From 03d6c3b0fa4f5f0379cede079ec828a6c999fe43 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 10:39:07 +0200 Subject: iwlwifi: pcie: re-ACK all interrupts after device reset When we reset the device, the CSR_INT gets cleared as well as CSR_INT_MASK. Meaning that we shouldn't get any interrupt but, due to a hardware bug, recent devices will keep sending interrupts. This leads to an interrupt storm while stopping the device. The way to fix this is to ACK all the interrupts after the device is reset so that the value of CSR_INT will stay 0xffffffff. Fixes: 522713c81e4e ("iwlwifi: pcie: properly reset the device") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 5d79a1f44b8..d151af36b6c 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1012,16 +1012,21 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) /* Stop the device, and put it in low power state */ iwl_pcie_apm_stop(trans); - /* Upon stop, the APM issues an interrupt if HW RF kill is set. - * Clean again the interrupt here + /* stop and reset the on-board processor */ + iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + udelay(20); + + /* + * Upon stop, the APM issues an interrupt if HW RF kill is set. + * This is a bug in certain verions of the hardware. + * Certain devices also keep sending HW RF kill interrupt all + * the time, unless the interrupt is ACKed even if the interrupt + * should be masked. Re-ACK all the interrupts here. */ spin_lock(&trans_pcie->irq_lock); iwl_disable_interrupts(trans); spin_unlock(&trans_pcie->irq_lock); - /* stop and reset the on-board processor */ - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - udelay(20); /* clear all status bits */ clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status); -- cgit v1.2.3-70-g09d2 From 31a5a09c1c5c888181e86a951a9a6c3ec27f7642 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Dec 2014 08:25:44 +0200 Subject: iwlwifi: don't double free a pointer if no FW was found In the very unlikely case in which no firmware could be, found. the same pointer was freed twice. Fix that. Fixes: 490fefebb6db ("iwlwifi: define the .ucode file format for debug") Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 38de1513e4d..850b85a4780 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1323,10 +1323,10 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) try_again: /* try next, if any */ - kfree(pieces); release_firmware(ucode_raw); if (iwl_request_firmware(drv, false)) goto out_unbind; + kfree(pieces); return; out_free_fw: -- cgit v1.2.3-70-g09d2 From 55fd1ce820f461b77919a1997ba8285652219024 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 2 Dec 2014 22:09:55 +0200 Subject: iwlwifi: add new device IDs for 3165 A few device IDs were added, reflect this change in the driver. Cc; [3.13+] Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/drv.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3ee8e384887..2f0c4b17034 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -367,7 +367,11 @@ static const struct pci_device_id iwl_hw_card_ids[] = { /* 3165 Series */ {IWL_PCI_DEVICE(0x3165, 0x4010, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4012, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4110, iwl3165_2ac_cfg)}, {IWL_PCI_DEVICE(0x3165, 0x4210, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4410, iwl3165_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3165, 0x4510, iwl3165_2ac_cfg)}, /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, -- cgit v1.2.3-70-g09d2 From baa21e834941ee5fbe4bd421c871f7c0c5f9a086 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 2 Dec 2014 14:28:45 +0200 Subject: iwlwifi: pcie: limit fw chunk sizes given to fh New FW has chunks that are larger than the size limit of the FH's DMA. To make sure we don't crash it - actively limit the max size of each chunk. Signed-off-by: Liad Kaufman Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fh.h | 1 + drivers/net/wireless/iwlwifi/pcie/trans.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 9564ae173d0..1f7f15eb86d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -310,6 +310,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) #define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH_MEM_TB_MAX_LENGTH (0x00020000) /* TFDB Area - TFDs buffer table */ #define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index d151af36b6c..523fe0c88dc 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -614,7 +614,7 @@ static int iwl_pcie_load_section(struct iwl_trans *trans, u8 section_num, { u8 *v_addr; dma_addr_t p_addr; - u32 offset, chunk_sz = section->len; + u32 offset, chunk_sz = min_t(u32, FH_MEM_TB_MAX_LENGTH, section->len); int ret = 0; IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n", -- cgit v1.2.3-70-g09d2 From 015760563ec77bf17cec712fa94afdf53b285287 Mon Sep 17 00:00:00 2001 From: Hisashi Nakamura Date: Mon, 15 Dec 2014 23:01:11 +0900 Subject: spi: sh-msiof: Add runtime PM lock in initializing SH-MSIOF driver is enabled autosuspend API of spi framework. But autosuspend framework doesn't work during initializing. So runtime PM lock is added in SH-MSIOF driver initializing. Fixes: e2a0ba547ba31c (spi: sh-msiof: Convert to spi core auto_runtime_pm framework) Signed-off-by: Hisashi Nakamura Signed-off-by: Yoshihiro Kaneko Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sh-msiof.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 3f365402fcc..14052936b1c 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -480,6 +480,8 @@ static int sh_msiof_spi_setup(struct spi_device *spi) struct device_node *np = spi->master->dev.of_node; struct sh_msiof_spi_priv *p = spi_master_get_devdata(spi->master); + pm_runtime_get_sync(&p->pdev->dev); + if (!np) { /* * Use spi->controller_data for CS (same strategy as spi_gpio), @@ -498,6 +500,9 @@ static int sh_msiof_spi_setup(struct spi_device *spi) if (spi->cs_gpio >= 0) gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); + + pm_runtime_put_sync(&p->pdev->dev); + return 0; } -- cgit v1.2.3-70-g09d2 From 97d86e07b71643086a6d22a60efae2fb095fa82a Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2014 15:57:09 -0800 Subject: Input: gpio_keys - allow separating gpio and irq in device tree This change allows specify interrupt for buttons separately form gpio, potentially allowing to form several "clusters" of buttons on different interrupts. Button defined without both gpio and irq in device tree is a hared error instead of a warning now. Tested-by: Andy Shevchenko Reviewed-by: Linus Walleij Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/gpio-keys.txt | 10 +++-- drivers/input/keyboard/gpio_keys.c | 49 ++++++++++++---------- 2 files changed, 33 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index a4a38fcf2ed..44b705767ac 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -10,12 +10,13 @@ Optional properties: Each button (key) is represented as a sub-node of "gpio-keys": Subnode properties: + - gpios: OF device-tree gpio specification. + - interrupts: the interrupt line for that input. - label: Descriptive name of the key. - linux,code: Keycode to emit. -Required mutual exclusive subnode-properties: - - gpios: OF device-tree gpio specification. - - interrupts: the interrupt line for that input +Note that either "interrupts" or "gpios" properties can be omitted, but not +both at the same time. Specifying both properties is allowed. Optional subnode-properties: - linux,input-type: Specify event type this button/key generates. @@ -23,6 +24,9 @@ Optional subnode-properties: - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - gpio-key,wakeup: Boolean, button can wake-up the system. + - linux,can-disable: Boolean, indicates that button is connected + to dedicated (not shared) interrupt which can be disabled to + suppress events from the button. Example nodes: diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index f44f05b70ee..a5ece3ff19c 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -470,15 +470,19 @@ static int gpio_keys_setup_key(struct platform_device *pdev, button->debounce_interval; } - irq = gpio_to_irq(button->gpio); - if (irq < 0) { - error = irq; - dev_err(dev, - "Unable to get irq number for GPIO %d, error %d\n", - button->gpio, error); - return error; + if (button->irq) { + bdata->irq = button->irq; + } else { + irq = gpio_to_irq(button->gpio); + if (irq < 0) { + error = irq; + dev_err(dev, + "Unable to get irq number for GPIO %d, error %d\n", + button->gpio, error); + return error; + } + bdata->irq = irq; } - bdata->irq = irq; INIT_WORK(&bdata->work, gpio_keys_gpio_work_func); setup_timer(&bdata->timer, @@ -618,33 +622,30 @@ gpio_keys_get_devtree_pdata(struct device *dev) i = 0; for_each_child_of_node(node, pp) { - int gpio = -1; enum of_gpio_flags flags; button = &pdata->buttons[i++]; - if (!of_find_property(pp, "gpios", NULL)) { - button->irq = irq_of_parse_and_map(pp, 0); - if (button->irq == 0) { - i--; - pdata->nbuttons--; - dev_warn(dev, "Found button without gpios or irqs\n"); - continue; - } - } else { - gpio = of_get_gpio_flags(pp, 0, &flags); - if (gpio < 0) { - error = gpio; + button->gpio = of_get_gpio_flags(pp, 0, &flags); + if (button->gpio < 0) { + error = button->gpio; + if (error != -ENOENT) { if (error != -EPROBE_DEFER) dev_err(dev, "Failed to get gpio flags, error: %d\n", error); return ERR_PTR(error); } + } else { + button->active_low = flags & OF_GPIO_ACTIVE_LOW; } - button->gpio = gpio; - button->active_low = flags & OF_GPIO_ACTIVE_LOW; + button->irq = irq_of_parse_and_map(pp, 0); + + if (!gpio_is_valid(button->gpio) && !button->irq) { + dev_err(dev, "Found button without gpios or irqs\n"); + return ERR_PTR(-EINVAL); + } if (of_property_read_u32(pp, "linux,code", &button->code)) { dev_err(dev, "Button without keycode: 0x%x\n", @@ -659,6 +660,8 @@ gpio_keys_get_devtree_pdata(struct device *dev) button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL); + button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL); + if (of_property_read_u32(pp, "debounce-interval", &button->debounce_interval)) button->debounce_interval = 5; -- cgit v1.2.3-70-g09d2 From 8ed92556761e1f383d28215d6de92fe4ada35001 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 14 Nov 2014 17:32:01 -0800 Subject: Input: gpio_keys - replace timer and workqueue with delayed workqueue We do not need to roll our own implementation of delayed work now that we have proper implementation of mod_delayed_work. For interrupt-only driven buttons we retain the timer, but we rename it to release_timer to better reflect its purpose. Tested-by: Andy Shevchenko Reviewed-by: Linus Walleij Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 65 ++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index a5ece3ff19c..eefd976ab4e 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -35,9 +35,13 @@ struct gpio_button_data { const struct gpio_keys_button *button; struct input_dev *input; - struct timer_list timer; - struct work_struct work; - unsigned int timer_debounce; /* in msecs */ + + struct timer_list release_timer; + unsigned int release_delay; /* in msecs, for IRQ-only buttons */ + + struct delayed_work work; + unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */ + unsigned int irq; spinlock_t lock; bool disabled; @@ -116,11 +120,14 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) { if (!bdata->disabled) { /* - * Disable IRQ and possible debouncing timer. + * Disable IRQ and associated timer/work structure. */ disable_irq(bdata->irq); - if (bdata->timer_debounce) - del_timer_sync(&bdata->timer); + + if (gpio_is_valid(bdata->button->gpio)) + cancel_delayed_work_sync(&bdata->work); + else + del_timer_sync(&bdata->release_timer); bdata->disabled = true; } @@ -343,7 +350,7 @@ static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) static void gpio_keys_gpio_work_func(struct work_struct *work) { struct gpio_button_data *bdata = - container_of(work, struct gpio_button_data, work); + container_of(work, struct gpio_button_data, work.work); gpio_keys_gpio_report_event(bdata); @@ -351,13 +358,6 @@ static void gpio_keys_gpio_work_func(struct work_struct *work) pm_relax(bdata->input->dev.parent); } -static void gpio_keys_gpio_timer(unsigned long _data) -{ - struct gpio_button_data *bdata = (struct gpio_button_data *)_data; - - schedule_work(&bdata->work); -} - static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) { struct gpio_button_data *bdata = dev_id; @@ -366,11 +366,10 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) if (bdata->button->wakeup) pm_stay_awake(bdata->input->dev.parent); - if (bdata->timer_debounce) - mod_timer(&bdata->timer, - jiffies + msecs_to_jiffies(bdata->timer_debounce)); - else - schedule_work(&bdata->work); + + mod_delayed_work(system_wq, + &bdata->work, + msecs_to_jiffies(bdata->software_debounce)); return IRQ_HANDLED; } @@ -408,7 +407,7 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) input_event(input, EV_KEY, button->code, 1); input_sync(input); - if (!bdata->timer_debounce) { + if (!bdata->release_delay) { input_event(input, EV_KEY, button->code, 0); input_sync(input); goto out; @@ -417,9 +416,9 @@ static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) bdata->key_pressed = true; } - if (bdata->timer_debounce) - mod_timer(&bdata->timer, - jiffies + msecs_to_jiffies(bdata->timer_debounce)); + if (bdata->release_delay) + mod_timer(&bdata->release_timer, + jiffies + msecs_to_jiffies(bdata->release_delay)); out: spin_unlock_irqrestore(&bdata->lock, flags); return IRQ_HANDLED; @@ -429,10 +428,10 @@ static void gpio_keys_quiesce_key(void *data) { struct gpio_button_data *bdata = data; - if (bdata->timer_debounce) - del_timer_sync(&bdata->timer); - - cancel_work_sync(&bdata->work); + if (gpio_is_valid(bdata->button->gpio)) + cancel_delayed_work_sync(&bdata->work); + else + del_timer_sync(&bdata->release_timer); } static int gpio_keys_setup_key(struct platform_device *pdev, @@ -466,7 +465,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, button->debounce_interval * 1000); /* use timer if gpiolib doesn't provide debounce */ if (error < 0) - bdata->timer_debounce = + bdata->software_debounce = button->debounce_interval; } @@ -484,9 +483,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, bdata->irq = irq; } - INIT_WORK(&bdata->work, gpio_keys_gpio_work_func); - setup_timer(&bdata->timer, - gpio_keys_gpio_timer, (unsigned long)bdata); + INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func); isr = gpio_keys_gpio_isr; irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; @@ -503,8 +500,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev, return -EINVAL; } - bdata->timer_debounce = button->debounce_interval; - setup_timer(&bdata->timer, + bdata->release_delay = button->debounce_interval; + setup_timer(&bdata->release_timer, gpio_keys_irq_timer, (unsigned long)bdata); isr = gpio_keys_irq_isr; @@ -514,7 +511,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, input_set_capability(input, button->type ?: EV_KEY, button->code); /* - * Install custom action to cancel debounce timer and + * Install custom action to cancel release timer and * workqueue item. */ error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata); -- cgit v1.2.3-70-g09d2 From 189387f9e0affb491b8c8833b6afd9623ab7f26a Mon Sep 17 00:00:00 2001 From: Asaf Vertz Date: Sat, 13 Dec 2014 10:59:04 -0800 Subject: Input: edt-ft5x06 - fixed a macro coding style issue Fixed a coding style error, macros with complex values should be enclosed in parentheses. Signed-off-by: Asaf Vertz Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/edt-ft5x06.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 2e4d90919f4..dcc68efd0d7 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -850,9 +850,11 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, } #define EDT_ATTR_CHECKSET(name, reg) \ +do { \ if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \ pdata->name <= edt_ft5x06_attr_##name.limit_high) \ - edt_ft5x06_register_write(tsdata, reg, pdata->name) + edt_ft5x06_register_write(tsdata, reg, pdata->name); \ +} while (0) #define EDT_GET_PROP(name, reg) { \ u32 val; \ -- cgit v1.2.3-70-g09d2 From baf332c0f1cede26e9c2af6276b36b4c3a36e34a Mon Sep 17 00:00:00 2001 From: Anshul Garg Date: Sat, 13 Dec 2014 11:58:23 -0800 Subject: Input: optimize events_per_packet count calculation This patch avoids unnecessary operations while estimating events per packet for an input device when event type is not set. Signed-off-by: Anshul Garg Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/input/input.c b/drivers/input/input.c index 04217c2e345..213e3a1903e 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1974,18 +1974,22 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) events = mt_slots + 1; /* count SYN_MT_REPORT and SYN_REPORT */ - for (i = 0; i < ABS_CNT; i++) { - if (test_bit(i, dev->absbit)) { - if (input_is_mt_axis(i)) - events += mt_slots; - else - events++; + if (test_bit(EV_ABS, dev->evbit)) { + for (i = 0; i < ABS_CNT; i++) { + if (test_bit(i, dev->absbit)) { + if (input_is_mt_axis(i)) + events += mt_slots; + else + events++; + } } } - for (i = 0; i < REL_CNT; i++) - if (test_bit(i, dev->relbit)) - events++; + if (test_bit(EV_REL, dev->evbit)) { + for (i = 0; i < REL_CNT; i++) + if (test_bit(i, dev->relbit)) + events++; + } /* Make room for KEY and MSC events */ events += 7; -- cgit v1.2.3-70-g09d2 From 80e1dd82be59d247e899d8ce29389f84ed828994 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 3 Nov 2014 16:48:47 -0800 Subject: mfd: stmpe: add pull up/down register offsets for STMPE This adds the register offsets for pull up/down for the STMPE 1601, 1801 and 24xx expanders. This is used to bias GPIO lines and keypad lines. Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Dmitry Torokhov --- drivers/mfd/stmpe.c | 4 ++++ drivers/mfd/stmpe.h | 3 +++ include/linux/mfd/stmpe.h | 2 ++ 3 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 02a17c388e8..2d29d17518c 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -519,6 +519,7 @@ static const u8 stmpe1601_regs[] = { [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB, [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB, [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB, + [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB, [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB, [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB, [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB, @@ -667,6 +668,7 @@ static const u8 stmpe1801_regs[] = { [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW, [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW, [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW, + [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW, [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW, [STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW, }; @@ -750,6 +752,8 @@ static const u8 stmpe24xx_regs[] = { [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB, [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB, [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB, + [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB, + [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB, [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB, [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB, [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB, diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 2d045f26f19..e00710b6393 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -188,6 +188,7 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE1601_REG_GPIO_ED_MSB 0x8A #define STMPE1601_REG_GPIO_RE_LSB 0x8D #define STMPE1601_REG_GPIO_FE_LSB 0x8F +#define STMPE1601_REG_GPIO_PU_LSB 0x91 #define STMPE1601_REG_GPIO_AF_U_MSB 0x92 #define STMPE1601_SYS_CTRL_ENABLE_GPIO (1 << 3) @@ -276,6 +277,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE24XX_REG_GPEDR_MSB 0x8C #define STMPE24XX_REG_GPRER_LSB 0x91 #define STMPE24XX_REG_GPFER_LSB 0x94 +#define STMPE24XX_REG_GPPUR_LSB 0x97 +#define STMPE24XX_REG_GPPDR_LSB 0x9a #define STMPE24XX_REG_GPAFR_U_MSB 0x9B #define STMPE24XX_SYS_CTRL_ENABLE_GPIO (1 << 3) diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 575a86c7fcb..cc0deb72e46 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -50,6 +50,8 @@ enum { STMPE_IDX_GPEDR_MSB, STMPE_IDX_GPRER_LSB, STMPE_IDX_GPFER_LSB, + STMPE_IDX_GPPUR_LSB, + STMPE_IDX_GPPDR_LSB, STMPE_IDX_GPAFR_U_MSB, STMPE_IDX_IEGPIOR_LSB, STMPE_IDX_ISGPIOR_LSB, -- cgit v1.2.3-70-g09d2 From a4164863e150c4991d2ac965e3fc52f9d8df3d7e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 3 Nov 2014 16:51:26 -0800 Subject: Input: stmpe - enforce device tree only mode The STMPE keypad controller is only used with device tree configured systems, so force the configuration to come from device tree only, and now actually get the rows and cols from the device tree too. Signed-off-by: Linus Walleij Acked-by: Lee Jones Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/stmpe-keypad.txt | 2 + drivers/input/keyboard/Kconfig | 1 + drivers/input/keyboard/stmpe-keypad.c | 104 +++++++++------------ include/linux/mfd/stmpe.h | 20 ---- 4 files changed, 48 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt index 1b97222e8a0..12bb771d66d 100644 --- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt +++ b/Documentation/devicetree/bindings/input/stmpe-keypad.txt @@ -8,6 +8,8 @@ Optional properties: - debounce-interval : Debouncing interval time in milliseconds - st,scan-count : Scanning cycles elapsed before key data is updated - st,no-autorepeat : If specified device will not autorepeat + - keypad,num-rows : See ./matrix-keymap.txt + - keypad,num-columns : See ./matrix-keymap.txt Example: diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 96ee26c555e..a5d9b3f3c87 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -559,6 +559,7 @@ config KEYBOARD_SH_KEYSC config KEYBOARD_STMPE tristate "STMPE keypad support" depends on MFD_STMPE + depends on OF select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad controller on STMPE I/O diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c index c6727dda68f..8d1e7af3c5b 100644 --- a/drivers/input/keyboard/stmpe-keypad.c +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -45,7 +45,7 @@ #define STMPE_KEYPAD_MAX_ROWS 8 #define STMPE_KEYPAD_MAX_COLS 8 #define STMPE_KEYPAD_ROW_SHIFT 3 -#define STMPE_KEYPAD_KEYMAP_SIZE \ +#define STMPE_KEYPAD_KEYMAP_MAX_SIZE \ (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) /** @@ -99,16 +99,30 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { }, }; +/** + * struct stmpe_keypad - STMPE keypad state container + * @stmpe: pointer to parent STMPE device + * @input: spawned input device + * @variant: STMPE variant + * @debounce_ms: debounce interval, in ms. Maximum is + * %STMPE_KEYPAD_MAX_DEBOUNCE. + * @scan_count: number of key scanning cycles to confirm key data. + * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. + * @no_autorepeat: disable key autorepeat + * @rows: bitmask for the rows + * @cols: bitmask for the columns + * @keymap: the keymap + */ struct stmpe_keypad { struct stmpe *stmpe; struct input_dev *input; const struct stmpe_keypad_variant *variant; - const struct stmpe_keypad_platform_data *plat; - + unsigned int debounce_ms; + unsigned int scan_count; + bool no_autorepeat; unsigned int rows; unsigned int cols; - - unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE]; + unsigned short keymap[STMPE_KEYPAD_KEYMAP_MAX_SIZE]; }; static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data) @@ -208,15 +222,14 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad) { - const struct stmpe_keypad_platform_data *plat = keypad->plat; const struct stmpe_keypad_variant *variant = keypad->variant; struct stmpe *stmpe = keypad->stmpe; int ret; - if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) + if (keypad->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) return -EINVAL; - if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) + if (keypad->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) return -EINVAL; ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD); @@ -245,7 +258,7 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad) ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB, STMPE_KPC_CTRL_MSB_SCAN_COUNT, - plat->scan_count << 4); + keypad->scan_count << 4); if (ret < 0) return ret; @@ -253,17 +266,18 @@ static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad) STMPE_KPC_CTRL_LSB_SCAN | STMPE_KPC_CTRL_LSB_DEBOUNCE, STMPE_KPC_CTRL_LSB_SCAN | - (plat->debounce_ms << 1)); + (keypad->debounce_ms << 1)); } -static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad) +static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad, + u32 used_rows, u32 used_cols) { int row, col; - for (row = 0; row < STMPE_KEYPAD_MAX_ROWS; row++) { - for (col = 0; col < STMPE_KEYPAD_MAX_COLS; col++) { + for (row = 0; row < used_rows; row++) { + for (col = 0; col < used_cols; col++) { int code = MATRIX_SCAN_CODE(row, col, - STMPE_KEYPAD_ROW_SHIFT); + STMPE_KEYPAD_ROW_SHIFT); if (keypad->keymap[code] != KEY_RESERVED) { keypad->rows |= 1 << row; keypad->cols |= 1 << col; @@ -272,51 +286,17 @@ static void stmpe_keypad_fill_used_pins(struct stmpe_keypad *keypad) } } -#ifdef CONFIG_OF -static const struct stmpe_keypad_platform_data * -stmpe_keypad_of_probe(struct device *dev) -{ - struct device_node *np = dev->of_node; - struct stmpe_keypad_platform_data *plat; - - if (!np) - return ERR_PTR(-ENODEV); - - plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); - if (!plat) - return ERR_PTR(-ENOMEM); - - of_property_read_u32(np, "debounce-interval", &plat->debounce_ms); - of_property_read_u32(np, "st,scan-count", &plat->scan_count); - - plat->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat"); - - return plat; -} -#else -static inline const struct stmpe_keypad_platform_data * -stmpe_keypad_of_probe(struct device *dev) -{ - return ERR_PTR(-EINVAL); -} -#endif - static int stmpe_keypad_probe(struct platform_device *pdev) { struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); - const struct stmpe_keypad_platform_data *plat; + struct device_node *np = pdev->dev.of_node; struct stmpe_keypad *keypad; struct input_dev *input; + u32 rows; + u32 cols; int error; int irq; - plat = stmpe->pdata->keypad; - if (!plat) { - plat = stmpe_keypad_of_probe(&pdev->dev); - if (IS_ERR(plat)) - return PTR_ERR(plat); - } - irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -326,6 +306,13 @@ static int stmpe_keypad_probe(struct platform_device *pdev) if (!keypad) return -ENOMEM; + keypad->stmpe = stmpe; + keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; + + of_property_read_u32(np, "debounce-interval", &keypad->debounce_ms); + of_property_read_u32(np, "st,scan-count", &keypad->scan_count); + keypad->no_autorepeat = of_property_read_bool(np, "st,no-autorepeat"); + input = devm_input_allocate_device(&pdev->dev); if (!input) return -ENOMEM; @@ -334,23 +321,22 @@ static int stmpe_keypad_probe(struct platform_device *pdev) input->id.bustype = BUS_I2C; input->dev.parent = &pdev->dev; - error = matrix_keypad_build_keymap(plat->keymap_data, NULL, - STMPE_KEYPAD_MAX_ROWS, - STMPE_KEYPAD_MAX_COLS, + error = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, rows, cols, keypad->keymap, input); if (error) return error; input_set_capability(input, EV_MSC, MSC_SCAN); - if (!plat->no_autorepeat) + if (!keypad->no_autorepeat) __set_bit(EV_REP, input->evbit); - stmpe_keypad_fill_used_pins(keypad); + stmpe_keypad_fill_used_pins(keypad, rows, cols); - keypad->stmpe = stmpe; - keypad->plat = plat; keypad->input = input; - keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; error = stmpe_keypad_chip_init(keypad); if (error < 0) diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index cc0deb72e46..f742b6717d5 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -115,24 +115,6 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks); extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); -struct matrix_keymap_data; - -/** - * struct stmpe_keypad_platform_data - STMPE keypad platform data - * @keymap_data: key map table and size - * @debounce_ms: debounce interval, in ms. Maximum is - * %STMPE_KEYPAD_MAX_DEBOUNCE. - * @scan_count: number of key scanning cycles to confirm key data. - * Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT. - * @no_autorepeat: disable key autorepeat - */ -struct stmpe_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - unsigned int debounce_ms; - unsigned int scan_count; - bool no_autorepeat; -}; - #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) /** @@ -201,7 +183,6 @@ struct stmpe_ts_platform_data { * @irq_gpio: gpio number over which irq will be requested (significant only if * irq_over_gpio is true) * @gpio: GPIO-specific platform data - * @keypad: keypad-specific platform data * @ts: touchscreen-specific platform data */ struct stmpe_platform_data { @@ -214,7 +195,6 @@ struct stmpe_platform_data { int autosleep_timeout; struct stmpe_gpio_platform_data *gpio; - struct stmpe_keypad_platform_data *keypad; struct stmpe_ts_platform_data *ts; }; -- cgit v1.2.3-70-g09d2 From 7c12a5b19e13ee78c3acb759f264df87ad984ffa Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 Dec 2014 22:23:40 -0800 Subject: Input: stmpe - bias keypad columns properly All keypad column pins used as inputs should be pulled up on the STMPE24xx, but this is not done by the current driver. Add some logic that will do this properly. The STMPE1601 also has a keypad controller, but explicitly does *NOT* require you to set up any pull-ups. Signed-off-by: Linus Walleij Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/stmpe-keypad.c | 37 +++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c index 8d1e7af3c5b..64514e64d55 100644 --- a/drivers/input/keyboard/stmpe-keypad.c +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -52,6 +52,7 @@ * struct stmpe_keypad_variant - model-specific attributes * @auto_increment: whether the KPC_DATA_BYTE register address * auto-increments on multiple read + * @set_pullup: whether the pins need to have their pull-ups set * @num_data: number of data bytes * @num_normal_data: number of normal keys' data bytes * @max_cols: maximum number of columns supported @@ -61,6 +62,7 @@ */ struct stmpe_keypad_variant { bool auto_increment; + bool set_pullup; int num_data; int num_normal_data; int max_cols; @@ -81,6 +83,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { }, [STMPE2401] = { .auto_increment = false, + .set_pullup = true, .num_data = 3, .num_normal_data = 2, .max_cols = 8, @@ -90,6 +93,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { }, [STMPE2403] = { .auto_increment = true, + .set_pullup = true, .num_data = 5, .num_normal_data = 3, .max_cols = 8, @@ -185,7 +189,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) unsigned int col_gpios = variant->col_gpios; unsigned int row_gpios = variant->row_gpios; struct stmpe *stmpe = keypad->stmpe; + u8 pureg = stmpe->regs[STMPE_IDX_GPPUR_LSB]; unsigned int pins = 0; + unsigned int pu_pins = 0; + int ret; int i; /* @@ -202,8 +209,10 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) for (i = 0; i < variant->max_cols; i++) { int num = __ffs(col_gpios); - if (keypad->cols & (1 << i)) + if (keypad->cols & (1 << i)) { pins |= 1 << num; + pu_pins |= 1 << num; + } col_gpios &= ~(1 << num); } @@ -217,7 +226,31 @@ static int stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) row_gpios &= ~(1 << num); } - return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); + ret = stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); + if (ret) + return ret; + + /* + * On STMPE24xx, set pin bias to pull-up on all keypad input + * pins (columns), this incidentally happen to be maximum 8 pins + * and placed at GPIO0-7 so only the LSB of the pull up register + * ever needs to be written. + */ + if (variant->set_pullup) { + u8 val; + + ret = stmpe_reg_read(stmpe, pureg); + if (ret) + return ret; + + /* Do not touch unused pins, may be used for GPIO */ + val = ret & ~pu_pins; + val |= pu_pins; + + ret = stmpe_reg_write(stmpe, pureg, val); + } + + return 0; } static int stmpe_keypad_chip_init(struct stmpe_keypad *keypad) -- cgit v1.2.3-70-g09d2 From d6ad36913083d683aad4e02e53580c995f1a6ede Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 10 Dec 2014 11:02:09 +0000 Subject: clocksource: arch_timer: Only use the virtual counter (CNTVCT) on arm64 Commit 0b46b8a718c6 (clocksource: arch_timer: Fix code to use physical timers when requested) introduces the use of physical counters in the ARM architected timer driver. However, he arm64 kernel uses CNTVCT in VDSO. When booting in EL2, the kernel switches to the physical timers to make things easier for KVM but it continues to use the virtual counter both in user and kernel. While in such scenario CNTVCT == CNTPCT (since CNTVOFF is initialised by the kernel to 0), we want to spot firmware bugs corrupting CNTVOFF early (which would affect CNTVCT). Signed-off-by: Catalin Marinas Tested-by: Yingjoe Chen Cc: Daniel Lezcano Signed-off-by: Arnd Bergmann --- drivers/clocksource/arm_arch_timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 6a79fc4f900..095c1774592 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -462,7 +462,7 @@ static void __init arch_counter_register(unsigned type) /* Register the CP15 based counter if we have one */ if (type & ARCH_CP15_TIMER) { - if (arch_timer_use_virtual) + if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual) arch_timer_read_counter = arch_counter_get_cntvct; else arch_timer_read_counter = arch_counter_get_cntpct; -- cgit v1.2.3-70-g09d2 From 4108b3d96273784f697dd6d8e59ef9203a10a02d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 16 Dec 2014 01:52:06 -0500 Subject: cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID When menu sees CPUIDLE_FLAG_TIME_INVALID, it ignores its timestamps, and assumes that idle lasted as long as the time till next predicted timer expiration. But if an interrupt was seen and serviced before that duration, it would actually be more accurate to use the measured time rather than rounding up to the next predicted timer expiration. And if an interrupt is seen and serviced such that the mesured time exceeds the time till next predicted timer expiration, then truncating to that expiration is the right thing to do -- since we can never stay idle past that timer expiration. So the code can do a better job without checking for CPUIDLE_FLAG_TIME_INVALID. Signed-off-by: Len Brown Acked-by: Daniel Lezcano Reviewed-by: Tuukka Tikkanen Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/governors/menu.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 659d7b0c9eb..40580794e23 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -396,8 +396,8 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) * power state and occurrence of the wakeup event. * * If the entered idle state didn't support residency measurements, - * we are basically lost in the dark how much time passed. - * As a compromise, assume we slept for the whole expected time. + * we use them anyway if they are short, and if long, + * truncate to the whole expected time. * * Any measured amount of time will include the exit latency. * Since we are interested in when the wakeup begun, not when it @@ -405,22 +405,17 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) * the measured amount of time is less than the exit latency, * assume the state was never reached and the exit latency is 0. */ - if (unlikely(target->flags & CPUIDLE_FLAG_TIME_INVALID)) { - /* Use timer value as is */ - measured_us = data->next_timer_us; - } else { - /* Use measured value */ - measured_us = cpuidle_get_last_residency(dev); + /* measured value */ + measured_us = cpuidle_get_last_residency(dev); - /* Deduct exit latency */ - if (measured_us > target->exit_latency) - measured_us -= target->exit_latency; + /* Deduct exit latency */ + if (measured_us > target->exit_latency) + measured_us -= target->exit_latency; - /* Make sure our coefficients do not exceed unity */ - if (measured_us > data->next_timer_us) - measured_us = data->next_timer_us; - } + /* Make sure our coefficients do not exceed unity */ + if (measured_us > data->next_timer_us) + measured_us = data->next_timer_us; /* Update our correction ratio */ new_factor = data->correction_factor[data->bucket]; -- cgit v1.2.3-70-g09d2 From b73026b9c959600bcd65eeae7a5f7ac00ded886f Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 16 Dec 2014 01:52:07 -0500 Subject: cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID When the ladder governor sees the CPUIDLE_FLAG_TIME_INVALID flag, it unconditionally causes a state promotion by setting last_residency to a number higher than the state's promotion_time: last_residency = last_state->threshold.promotion_time + 1 It does this for fear that cpuidle_get_last_residency() will be in-accurate, because cpuidle_enter_state() invoked a state with CPUIDLE_FLAG_TIME_INVALID. But the only state with CPUIDLE_FLAG_TIME_INVALID is acpi_safe_halt(), which may return well after its actual idle duration because it enables interrupts, so cpuidle_enter_state() also measures interrupt service time. So what? In ladder, a huge invalid last_residency has exactly the same effect as the current code -- it unconditionally causes a state promotion. In the case where the idle residency plus measured interrupt handling time is less than the state's demotion_time -- we should use that timestamp to give ladder a chance to demote, rather than unconditionally promoting. This can be done by simply ignoring the CPUIDLE_FLAG_TIME_INVALID, and using the "invalid" time, as it is either equal to what we are doing today, or better. Signed-off-by: Len Brown Acked-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/governors/ladder.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c index 37263d9a105..401c0106ed3 100644 --- a/drivers/cpuidle/governors/ladder.c +++ b/drivers/cpuidle/governors/ladder.c @@ -79,12 +79,7 @@ static int ladder_select_state(struct cpuidle_driver *drv, last_state = &ldev->states[last_idx]; - if (!(drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_INVALID)) { - last_residency = cpuidle_get_last_residency(dev) - \ - drv->states[last_idx].exit_latency; - } - else - last_residency = last_state->threshold.promotion_time + 1; + last_residency = cpuidle_get_last_residency(dev) - drv->states[last_idx].exit_latency; /* consider promotion */ if (last_idx < drv->state_count - 1 && -- cgit v1.2.3-70-g09d2 From 62c4cf97e82cf79446642e599d155884f600cf17 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 16 Dec 2014 01:52:08 -0500 Subject: cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID CPUIDLE_FLAG_TIME_INVALID is no longer checked by menu or ladder cpuidle governors, so don't bother setting or defining it. It was originally invented to account for the fact that acpi_safe_halt() enables interrupts to invoke HLT. That would allow interrupt service routines to be included in the last_idle duration measurements made in cpuidle_enter_state(), potentially returning a duration much larger than reality. But menu and ladder can gracefully handle erroneously large duration intervals without checking for CPUIDLE_FLAG_TIME_INVALID. Further, if they don't check CPUIDLE_FLAG_TIME_INVALID, they can also benefit from the instances when the duration interval is not erroneously large. Signed-off-by: Len Brown Acked-by: Daniel Lezcano Signed-off-by: Rafael J. Wysocki --- drivers/acpi/processor_idle.c | 2 -- include/linux/cpuidle.h | 3 --- 2 files changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 380b4b43f36..7afba40e350 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -985,8 +985,6 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) state->flags = 0; switch (cx->type) { case ACPI_STATE_C1: - if (cx->entry_method != ACPI_CSTATE_FFH) - state->flags |= CPUIDLE_FLAG_TIME_INVALID; state->enter = acpi_idle_enter_c1; state->enter_dead = acpi_idle_play_dead; diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index a07e087f54b..ab70f3bc44a 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -53,7 +53,6 @@ struct cpuidle_state { }; /* Idle State Flags */ -#define CPUIDLE_FLAG_TIME_INVALID (0x01) /* is residency time measurable? */ #define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */ #define CPUIDLE_FLAG_TIMER_STOP (0x04) /* timer is stopped on this state */ @@ -89,8 +88,6 @@ DECLARE_PER_CPU(struct cpuidle_device, cpuidle_dev); /** * cpuidle_get_last_residency - retrieves the last state's residency time * @dev: the target CPU - * - * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_INVALID is set */ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) { -- cgit v1.2.3-70-g09d2 From 7496fcbe8a643097efc061160e1c3b65ee2fa350 Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Mon, 15 Dec 2014 09:08:59 +0530 Subject: PM / Domains: Export of_genpd_get_from_provider function This function looks up a PM domain form the provider. This will be useful to add parent/child domain relationship from the SoC specific code. The caller of the function must make sure that PM domain provider is already registered. Reviewed-by: Ulf Hansson Signed-off-by: Amit Daniel Kachhap Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 3 ++- include/linux/pm_domain.h | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 5d7b7548873..1bd119efaac 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -2108,7 +2108,7 @@ EXPORT_SYMBOL_GPL(of_genpd_del_provider); * Returns a valid pointer to struct generic_pm_domain on success or ERR_PTR() * on failure. */ -static struct generic_pm_domain *of_genpd_get_from_provider( +struct generic_pm_domain *of_genpd_get_from_provider( struct of_phandle_args *genpdspec) { struct generic_pm_domain *genpd = ERR_PTR(-ENOENT); @@ -2128,6 +2128,7 @@ static struct generic_pm_domain *of_genpd_get_from_provider( return genpd; } +EXPORT_SYMBOL_GPL(of_genpd_get_from_provider); /** * genpd_dev_pm_detach - Detach a device from its PM domain. diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 1dd6c7f6416..ba7ca5468a7 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -275,6 +275,8 @@ typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args, int __of_genpd_add_provider(struct device_node *np, genpd_xlate_t xlate, void *data); void of_genpd_del_provider(struct device_node *np); +struct generic_pm_domain *of_genpd_get_from_provider( + struct of_phandle_args *genpdspec); struct generic_pm_domain *__of_genpd_xlate_simple( struct of_phandle_args *genpdspec, @@ -292,6 +294,12 @@ static inline int __of_genpd_add_provider(struct device_node *np, } static inline void of_genpd_del_provider(struct device_node *np) {} +static inline struct generic_pm_domain *of_genpd_get_from_provider( + struct of_phandle_args *genpdspec) +{ + return NULL; +} + #define __of_genpd_xlate_simple NULL #define __of_genpd_xlate_onecell NULL -- cgit v1.2.3-70-g09d2 From d72be771c5dbabaf3058ef382f4934aa31c88df2 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 16 Dec 2014 09:52:47 -0800 Subject: powercap / RAPL: add IDs for future Xeon CPUs Enable RAPL driver on Xeon cpu id 0x56. Signed-off-by: Jacob Pan Signed-off-by: Rafael J. Wysocki --- drivers/powercap/intel_rapl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index c71443c4f26..97b5e4ee1ca 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -1041,6 +1041,7 @@ static const struct x86_cpu_id rapl_ids[] = { RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */ RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */ RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */ + RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */ RAPL_CPU(0x5A, rapl_defaults_atom),/* Annidale */ {} }; -- cgit v1.2.3-70-g09d2 From 2d2e95ea8f124869b96ad929d1701bd64844a06a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 17 Dec 2014 02:55:53 +0300 Subject: thermal: cpu_cooling: small memory leak on error There was a left over return here so the error handling isn't run. It leads to a small memory leak and a static checker warning. drivers/thermal/cpu_cooling.c:351 __cpufreq_cooling_register() info: ignoring unreachable code. Fixes: f6859014c7e7 ("thermal: cpu_cooling: Store frequencies in descending order") Acked-by: Viresh Kumar Signed-off-by: Dan Carpenter Signed-off-by: Eduardo Valentin --- drivers/thermal/cpu_cooling.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 051eb4821bc..9b45f6426f4 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -347,7 +347,6 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_dev->freq_table = kmalloc(sizeof(*cpufreq_dev->freq_table) * cpufreq_dev->max_level, GFP_KERNEL); if (!cpufreq_dev->freq_table) { - return ERR_PTR(-ENOMEM); cool_dev = ERR_PTR(-ENOMEM); goto free_cdev; } -- cgit v1.2.3-70-g09d2 From 2ba353204779c81d09bb03051d8a7a4b842f9ad3 Mon Sep 17 00:00:00 2001 From: haarp Date: Wed, 17 Dec 2014 15:22:08 -0800 Subject: Input: psmouse - expose drift duration for IBM trackpoints IBM Trackpoints have a feature to compensate for drift by recalibrating themselves periodically. By default, if for 0.5 seconds there is no change in position, it's used as the new zero. This duration is too low. Often, the calibration happens when the trackpoint is in fact being used. IBM's Trackpoint Engineering Specifications show a configuration register that allows changing this duration, rstdft1. Expose it via sysfs among the other settings. Signed-off-by: Mike Murdoch Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/trackpoint.c | 4 ++++ drivers/input/mouse/trackpoint.h | 5 +++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 30c8b699880..354d47ecd66 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -227,6 +227,7 @@ TRACKPOINT_INT_ATTR(thresh, TP_THRESH, TP_DEF_THRESH); TRACKPOINT_INT_ATTR(upthresh, TP_UP_THRESH, TP_DEF_UP_THRESH); TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME, TP_DEF_Z_TIME); TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV, TP_DEF_JENKS_CURV); +TRACKPOINT_INT_ATTR(drift_time, TP_DRIFT_TIME, TP_DEF_DRIFT_TIME); TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0, TP_DEF_PTSON); @@ -246,6 +247,7 @@ static struct attribute *trackpoint_attrs[] = { &psmouse_attr_upthresh.dattr.attr, &psmouse_attr_ztime.dattr.attr, &psmouse_attr_jenks.dattr.attr, + &psmouse_attr_drift_time.dattr.attr, &psmouse_attr_press_to_select.dattr.attr, &psmouse_attr_skipback.dattr.attr, &psmouse_attr_ext_dev.dattr.attr, @@ -312,6 +314,7 @@ static int trackpoint_sync(struct psmouse *psmouse, bool in_power_on_state) TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, upthresh); TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, ztime); TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, jenks); + TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, drift_time); /* toggles */ TRACKPOINT_UPDATE(in_power_on_state, psmouse, tp, press_to_select); @@ -332,6 +335,7 @@ static void trackpoint_defaults(struct trackpoint_data *tp) TRACKPOINT_SET_POWER_ON_DEFAULT(tp, upthresh); TRACKPOINT_SET_POWER_ON_DEFAULT(tp, ztime); TRACKPOINT_SET_POWER_ON_DEFAULT(tp, jenks); + TRACKPOINT_SET_POWER_ON_DEFAULT(tp, drift_time); TRACKPOINT_SET_POWER_ON_DEFAULT(tp, inertia); /* toggles */ diff --git a/drivers/input/mouse/trackpoint.h b/drivers/input/mouse/trackpoint.h index ecd0547964a..5617ed3a7d7 100644 --- a/drivers/input/mouse/trackpoint.h +++ b/drivers/input/mouse/trackpoint.h @@ -70,6 +70,9 @@ #define TP_UP_THRESH 0x5A /* Used to generate a 'click' on Z-axis */ #define TP_Z_TIME 0x5E /* How sharp of a press */ #define TP_JENKS_CURV 0x5D /* Minimum curvature for double click */ +#define TP_DRIFT_TIME 0x5F /* How long a 'hands off' condition */ + /* must last (x*107ms) for drift */ + /* correction to occur */ /* * Toggling Flag bits @@ -120,6 +123,7 @@ #define TP_DEF_UP_THRESH 0xFF #define TP_DEF_Z_TIME 0x26 #define TP_DEF_JENKS_CURV 0x87 +#define TP_DEF_DRIFT_TIME 0x05 /* Toggles */ #define TP_DEF_MB 0x00 @@ -137,6 +141,7 @@ struct trackpoint_data unsigned char draghys, mindrag; unsigned char thresh, upthresh; unsigned char ztime, jenks; + unsigned char drift_time; /* toggles */ unsigned char press_to_select; -- cgit v1.2.3-70-g09d2 From aac8bcf1ed3e2e97da0ec7e859d20fe3fa76bd97 Mon Sep 17 00:00:00 2001 From: Aniroop Mathur Date: Wed, 17 Dec 2014 15:33:06 -0800 Subject: Input: evdev - add CLOCK_BOOTTIME support This patch adds support for CLOCK_BOOTTIME for input event timestamp. CLOCK_BOOTTIME includes suspend time, so it would allow aplications to get correct time difference between two events even when system resumes from suspend state. Signed-off-by: Aniroop Mathur Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 60 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 44 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index bc203485716..b1a52abc58d 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -28,6 +28,13 @@ #include #include "input-compat.h" +enum evdev_clock_type { + EV_CLK_REAL = 0, + EV_CLK_MONO, + EV_CLK_BOOT, + EV_CLK_MAX +}; + struct evdev { int open; struct input_handle handle; @@ -49,12 +56,32 @@ struct evdev_client { struct fasync_struct *fasync; struct evdev *evdev; struct list_head node; - int clkid; + int clk_type; bool revoked; unsigned int bufsize; struct input_event buffer[]; }; +static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid) +{ + switch (clkid) { + + case CLOCK_REALTIME: + client->clk_type = EV_CLK_REAL; + break; + case CLOCK_MONOTONIC: + client->clk_type = EV_CLK_MONO; + break; + case CLOCK_BOOTTIME: + client->clk_type = EV_CLK_BOOT; + break; + default: + return -EINVAL; + } + + return 0; +} + /* flush queued events of type @type, caller must hold client->buffer_lock */ static void __evdev_flush_queue(struct evdev_client *client, unsigned int type) { @@ -108,8 +135,11 @@ static void evdev_queue_syn_dropped(struct evdev_client *client) struct input_event ev; ktime_t time; - time = (client->clkid == CLOCK_MONOTONIC) ? - ktime_get() : ktime_get_real(); + time = client->clk_type == EV_CLK_REAL ? + ktime_get_real() : + client->clk_type == EV_CLK_MONO ? + ktime_get() : + ktime_get_boottime(); ev.time = ktime_to_timeval(time); ev.type = EV_SYN; @@ -159,7 +189,7 @@ static void __pass_event(struct evdev_client *client, static void evdev_pass_values(struct evdev_client *client, const struct input_value *vals, unsigned int count, - ktime_t mono, ktime_t real) + ktime_t *ev_time) { struct evdev *evdev = client->evdev; const struct input_value *v; @@ -169,8 +199,7 @@ static void evdev_pass_values(struct evdev_client *client, if (client->revoked) return; - event.time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ? - mono : real); + event.time = ktime_to_timeval(ev_time[client->clk_type]); /* Interrupts are disabled, just acquire the lock. */ spin_lock(&client->buffer_lock); @@ -198,21 +227,22 @@ static void evdev_events(struct input_handle *handle, { struct evdev *evdev = handle->private; struct evdev_client *client; - ktime_t time_mono, time_real; + ktime_t ev_time[EV_CLK_MAX]; - time_mono = ktime_get(); - time_real = ktime_mono_to_real(time_mono); + ev_time[EV_CLK_MONO] = ktime_get(); + ev_time[EV_CLK_REAL] = ktime_mono_to_real(ev_time[EV_CLK_MONO]); + ev_time[EV_CLK_BOOT] = ktime_mono_to_any(ev_time[EV_CLK_MONO], + TK_OFFS_BOOT); rcu_read_lock(); client = rcu_dereference(evdev->grab); if (client) - evdev_pass_values(client, vals, count, time_mono, time_real); + evdev_pass_values(client, vals, count, ev_time); else list_for_each_entry_rcu(client, &evdev->client_list, node) - evdev_pass_values(client, vals, count, - time_mono, time_real); + evdev_pass_values(client, vals, count, ev_time); rcu_read_unlock(); } @@ -877,10 +907,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, case EVIOCSCLOCKID: if (copy_from_user(&i, p, sizeof(unsigned int))) return -EFAULT; - if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME) - return -EINVAL; - client->clkid = i; - return 0; + + return evdev_set_clk_type(client, i); case EVIOCGKEYCODE: return evdev_handle_get_keycode(dev, p); -- cgit v1.2.3-70-g09d2 From b02ded246d011d0eb22efc178ee711b636214083 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 16 Dec 2014 15:09:36 -0800 Subject: PM / OPP: add some lockdep annotations Certain OPP APIs need to be called under RCU lock; let's add a few rcu_lockdep_assert() calls to warn about potential misuse. Signed-off-by: Dmitry Torokhov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index d24dd614a0b..b78c14d30da 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -108,6 +108,14 @@ static LIST_HEAD(dev_opp_list); /* Lock to allow exclusive modification to the device and opp lists */ static DEFINE_MUTEX(dev_opp_list_lock); +#define opp_rcu_lockdep_assert() \ +do { \ + rcu_lockdep_assert(rcu_read_lock_held() || \ + lockdep_is_held(&dev_opp_list_lock), \ + "Missing rcu_read_lock() or " \ + "dev_opp_list_lock protection"); \ +} while (0) + /** * find_device_opp() - find device_opp struct using device pointer * @dev: device pointer used to lookup device OPPs @@ -218,6 +226,8 @@ int dev_pm_opp_get_opp_count(struct device *dev) struct dev_pm_opp *temp_opp; int count = 0; + opp_rcu_lockdep_assert(); + dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { int r = PTR_ERR(dev_opp); @@ -267,6 +277,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + opp_rcu_lockdep_assert(); + dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { int r = PTR_ERR(dev_opp); @@ -313,6 +325,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + opp_rcu_lockdep_assert(); + if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); return ERR_PTR(-EINVAL); @@ -361,6 +375,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, struct device_opp *dev_opp; struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); + opp_rcu_lockdep_assert(); + if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); return ERR_PTR(-EINVAL); -- cgit v1.2.3-70-g09d2 From 0fe30da2cb43782ee62d30c00a273d6934e5370e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 16 Dec 2014 15:09:37 -0800 Subject: PM / OPP: fix warning in of_free_opp_table() Not having OPP defined for a device is not a crime, we should not splat warning in this case. Also, it seems that we are ready to accept invalid dev (find_device_opp will return ERR_PTR(-EINVAL) then) so let's not crash in dev_name() in such case. Signed-off-by: Dmitry Torokhov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index b78c14d30da..aac7abcf74f 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -799,9 +799,15 @@ void of_free_opp_table(struct device *dev) /* Check for existing list for 'dev' */ dev_opp = find_device_opp(dev); - if (WARN(IS_ERR(dev_opp), "%s: dev_opp: %ld\n", dev_name(dev), - PTR_ERR(dev_opp))) + if (IS_ERR(dev_opp)) { + int error = PTR_ERR(dev_opp); + if (error != -ENODEV) + WARN(1, "%s: dev_opp: %d\n", + IS_ERR_OR_NULL(dev) ? + "Invalid device" : dev_name(dev), + error); return; + } /* Hold our list modification lock here */ mutex_lock(&dev_opp_list_lock); -- cgit v1.2.3-70-g09d2 From b4718c02f49ab5e1452353f0fae78beabe81467c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 16 Dec 2014 15:09:38 -0800 Subject: PM / OPP: take RCU lock in dev_pm_opp_get_opp_count A lot of callers are missing the fact that dev_pm_opp_get_opp_count needs to be called under RCU lock. Given that RCU locks can safely be nested, instead of providing *_locked() API, let's take RCU lock inside dev_pm_opp_get_opp_count() and leave callers as is. Signed-off-by: Dmitry Torokhov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index aac7abcf74f..106c6935930 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -216,9 +216,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); * This function returns the number of available opps if there are any, * else returns 0 if none or the corresponding error value. * - * Locking: This function must be called under rcu_read_lock(). This function - * internally references two RCU protected structures: device_opp and opp which - * are safe as long as we are under a common RCU locked section. + * Locking: This function takes rcu_read_lock(). */ int dev_pm_opp_get_opp_count(struct device *dev) { @@ -226,13 +224,14 @@ int dev_pm_opp_get_opp_count(struct device *dev) struct dev_pm_opp *temp_opp; int count = 0; - opp_rcu_lockdep_assert(); + rcu_read_lock(); dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { - int r = PTR_ERR(dev_opp); - dev_err(dev, "%s: device OPP not found (%d)\n", __func__, r); - return r; + count = PTR_ERR(dev_opp); + dev_err(dev, "%s: device OPP not found (%d)\n", + __func__, count); + goto out_unlock; } list_for_each_entry_rcu(temp_opp, &dev_opp->opp_list, node) { @@ -240,6 +239,8 @@ int dev_pm_opp_get_opp_count(struct device *dev) count++; } +out_unlock: + rcu_read_unlock(); return count; } EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); -- cgit v1.2.3-70-g09d2 From 62a041a4f58f32989460e37cb4f9aed5183f357f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 16 Dec 2014 15:09:39 -0800 Subject: cpufreq-dt: defer probing if OPP table is not ready cpufreq-dt driver supports mode when OPP table is provided by platform code and not device tree. However on certain platforms code that fills OPP table may run after cpufreq driver tries to initialize, so let's report -EPROBE_DEFER if we do not find any entires in OPP table for the CPU. Signed-off-by: Dmitry Torokhov Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 9bc2720628a..538abd50b77 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -211,6 +211,17 @@ static int cpufreq_init(struct cpufreq_policy *policy) /* OPPs might be populated at runtime, don't check for error here */ of_init_opp_table(cpu_dev); + /* + * But we need OPP table to function so if it is not there let's + * give platform code chance to provide it for us. + */ + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret <= 0) { + pr_debug("OPP table is not ready, deferring probe\n"); + ret = -EPROBE_DEFER; + goto out_free_opp; + } + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; -- cgit v1.2.3-70-g09d2 From 8b23811535d2e1dd6abbe4ce6ea1edfd50ce72de Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Dec 2014 09:52:59 -0800 Subject: Input: alps - v7: ignore new packets NEW packets are send to indicate a discontinuity in the finger coordinate reporting. Specifically a finger may have moved from slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for us. NEW packets have 3 problems: 1) They do not contain middle / right button info (on non clickpads) this can be worked around by preserving the old button state 2) They do not contain an accurate fingercount, and they are typically send when the number of fingers changes. We cannot use the old finger count as that may mismatch with the amount of touch coordinates we've available in the NEW packet 3) Their x data for the second touch is inaccurate leading to a possible jump of the x coordinate by 16 units when the first non NEW packet comes in Since problems 2 & 3 cannot be worked around, just ignore them. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede Tested-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 35a49bf5722..49e62201bb6 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -938,18 +938,36 @@ static int alps_decode_packet_v7(struct alps_fields *f, return 0; if (pkt_id == V7_PACKET_ID_UNKNOWN) return -1; + /* + * NEW packets are send to indicate a discontinuity in the finger + * coordinate reporting. Specifically a finger may have moved from + * slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for + * us. + * + * NEW packets have 3 problems: + * 1) They do not contain middle / right button info (on non clickpads) + * this can be worked around by preserving the old button state + * 2) They do not contain an accurate fingercount, and they are + * typically send when the number of fingers changes. We cannot use + * the old finger count as that may mismatch with the amount of + * touch coordinates we've available in the NEW packet + * 3) Their x data for the second touch is inaccurate leading to + * a possible jump of the x coordinate by 16 units when the first + * non NEW packet comes in + * Since problems 2 & 3 cannot be worked around, just ignore them. + */ + if (pkt_id == V7_PACKET_ID_NEW) + return 1; alps_get_finger_coordinate_v7(f->mt, p, pkt_id); - if (pkt_id == V7_PACKET_ID_TWO || pkt_id == V7_PACKET_ID_MULTI) { - f->left = (p[0] & 0x80) >> 7; - f->right = (p[0] & 0x20) >> 5; - f->middle = (p[0] & 0x10) >> 4; - } + f->left = (p[0] & 0x80) >> 7; + f->right = (p[0] & 0x20) >> 5; + f->middle = (p[0] & 0x10) >> 4; if (pkt_id == V7_PACKET_ID_TWO) f->fingers = alps_get_mt_count(f->mt); - else if (pkt_id == V7_PACKET_ID_MULTI) + else /* pkt_id == V7_PACKET_ID_MULTI */ f->fingers = 3 + (p[5] & 0x03); return 0; -- cgit v1.2.3-70-g09d2 From 7091c443dda8c6c6d8e70e33452252f9ad3e7814 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Dec 2014 09:53:34 -0800 Subject: Input: alps - v7: sometimes a single touch is reported in mt[1] The v7 proto differentiates between a primary touch (with high precision) and a secondary touch (with lower precision). Normally when 2 fingers are down and one is lifted the still present touch becomes the primary touch, but some traces have shown that this does not happen always. This commit deals with this by making alps_get_mt_count() not stop at the first empty mt slot, and if a touch is present in mt[1] and not mt[0] moving the data to mt[0] (for input_mt_assign_slots). BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede Tested-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 49e62201bb6..bfa62a63942 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -919,12 +919,14 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, static int alps_get_mt_count(struct input_mt_pos *mt) { - int i; + int i, fingers = 0; - for (i = 0; i < MAX_TOUCHES && mt[i].x != 0 && mt[i].y != 0; i++) - /* empty */; + for (i = 0; i < MAX_TOUCHES; i++) { + if (mt[i].x != 0 || mt[i].y != 0) + fingers++; + } - return i; + return fingers; } static int alps_decode_packet_v7(struct alps_fields *f, @@ -970,6 +972,14 @@ static int alps_decode_packet_v7(struct alps_fields *f, else /* pkt_id == V7_PACKET_ID_MULTI */ f->fingers = 3 + (p[5] & 0x03); + /* Sometimes a single touch is reported in mt[1] rather then mt[0] */ + if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) { + f->mt[0].x = f->mt[1].x; + f->mt[0].y = f->mt[1].y; + f->mt[1].x = 0; + f->mt[1].y = 0; + } + return 0; } -- cgit v1.2.3-70-g09d2 From d27eb7931c98a1ebfc9b2fcc48939846bcbfc804 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Dec 2014 09:55:14 -0800 Subject: Input: alps - v7: fix finger counting for > 2 fingers on clickpads Protocol v7 uses the middle / right button bits on clickpads to communicate "location" information of a 3th touch (and possible 4th) touch on clickpads. Specifically when 3 touches are down, if one of the 3 touches is in the left / right button area, this will get reported in the middle / right button bits and the touchpad will still send a TWO type packet rather then a MULTI type packet, so when this happens we must add the finger reported in the button area to the finger count. Likewise we must also add fingers reported this way to the finger count when we get MULTI packets. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede Tested-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index bfa62a63942..b48c6fb317e 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -933,6 +933,7 @@ static int alps_decode_packet_v7(struct alps_fields *f, unsigned char *p, struct psmouse *psmouse) { + struct alps_data *priv = psmouse->private; unsigned char pkt_id; pkt_id = alps_get_packet_id_v7(p); @@ -963,15 +964,22 @@ static int alps_decode_packet_v7(struct alps_fields *f, alps_get_finger_coordinate_v7(f->mt, p, pkt_id); - f->left = (p[0] & 0x80) >> 7; - f->right = (p[0] & 0x20) >> 5; - f->middle = (p[0] & 0x10) >> 4; - if (pkt_id == V7_PACKET_ID_TWO) f->fingers = alps_get_mt_count(f->mt); else /* pkt_id == V7_PACKET_ID_MULTI */ f->fingers = 3 + (p[5] & 0x03); + f->left = (p[0] & 0x80) >> 7; + if (priv->flags & ALPS_BUTTONPAD) { + if (p[0] & 0x20) + f->fingers++; + if (p[0] & 0x10) + f->fingers++; + } else { + f->right = (p[0] & 0x20) >> 5; + f->middle = (p[0] & 0x10) >> 4; + } + /* Sometimes a single touch is reported in mt[1] rather then mt[0] */ if (f->fingers == 1 && f->mt[0].x == 0 && f->mt[0].y == 0) { f->mt[0].x = f->mt[1].x; -- cgit v1.2.3-70-g09d2 From 27a560ba1d4f0a07a36e1de2cae839abe776e8f3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 18 Dec 2014 09:54:50 -0800 Subject: Input: alps - v7: document the v7 touchpad packet protocol Add a table documenting where all the bits are in the v7 touchpad packets. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index b48c6fb317e..0faea6df228 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -881,6 +881,34 @@ static void alps_get_finger_coordinate_v7(struct input_mt_pos *mt, unsigned char *pkt, unsigned char pkt_id) { + /* + * packet-fmt b7 b6 b5 b4 b3 b2 b1 b0 + * Byte0 TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0 + * Byte0 NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0 + * Byte1 Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3 + * Byte2 X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5 + * Byte3 X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0 + * Byte4 TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4 + * Byte4 MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1 + * Byte4 NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0 + * Byte5 TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4 + * Byte5 MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0 + * L: Left button + * R / M: Non-clickpads: Right / Middle button + * Clickpads: When > 2 fingers are down, and some fingers + * are in the button area, then the 2 coordinates reported + * are for fingers outside the button area and these report + * extra fingers being present in the right / left button + * area. Note these fingers are not added to the F field! + * so if a TWO packet is received and R = 1 then there are + * 3 fingers down, etc. + * TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt + * 0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt + * otherwise byte 0 bit 4 must be set and byte 0/4/5 are + * in NEW fmt + * F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ... + */ + mt[0].x = ((pkt[2] & 0x80) << 4); mt[0].x |= ((pkt[2] & 0x3F) << 5); mt[0].x |= ((pkt[3] & 0x30) >> 1); -- cgit v1.2.3-70-g09d2 From 4f2ff8ef9eab32e6bc01c71bb539fc68d0917f59 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Fri, 19 Dec 2014 13:19:35 +0800 Subject: sunvnet: fix a memory leak in vnet_handle_offloads when skb_gso_segment returns error, the original skb should be freed Signed-off-by: Li RongQing Acked-by: David L Stevens Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 45c408ef67d..d2835bf7b4f 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1201,6 +1201,7 @@ static int vnet_handle_offloads(struct vnet_port *port, struct sk_buff *skb) segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO); if (IS_ERR(segs)) { dev->stats.tx_dropped++; + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v1.2.3-70-g09d2 From 17e96834fd35997ca7cdfbf15413bcd5a36ad448 Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan <_govind@gmx.com> Date: Thu, 18 Dec 2014 15:58:42 +0530 Subject: enic: fix rx skb checksum Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: [] dump_stack+0x19/0x1b kernel: [] netdev_rx_csum_fault+0x3a/0x40 kernel: [] __skb_checksum_complete_head+0x62/0x70 kernel: [] __skb_checksum_complete+0x11/0x20 kernel: [] nf_ip_checksum+0xcc/0x100 kernel: [] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [] ? netif_rx+0xb9/0x1d0 kernel: [] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [] nf_iterate+0xaa/0xc0 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] nf_hook_slow+0x84/0x140 kernel: [] ? inet_del_offload+0x40/0x40 kernel: [] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc Cc: Stefan Assmann Reported-by: Sunil Choudhary Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 868d0f605d6..705f334ebb8 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -1060,10 +1060,14 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq, PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); } - if ((netdev->features & NETIF_F_RXCSUM) && !csum_not_calc) { - skb->csum = htons(checksum); - skb->ip_summed = CHECKSUM_COMPLETE; - } + /* Hardware does not provide whole packet checksum. It only + * provides pseudo checksum. Since hw validates the packet + * checksum but not provide us the checksum value. use + * CHECSUM_UNNECESSARY. + */ + if ((netdev->features & NETIF_F_RXCSUM) && tcp_udp_csum_ok && + ipv4_csum_ok) + skb->ip_summed = CHECKSUM_UNNECESSARY; if (vlan_stripped) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci); -- cgit v1.2.3-70-g09d2 From cb57720bf79688d64854a0a43565aa52303c1f3f Mon Sep 17 00:00:00 2001 From: Ethan Zhao Date: Thu, 18 Dec 2014 15:28:19 +0900 Subject: cpufreq: fix a NULL pointer dereference in __cpufreq_governor() If ACPI _PPC changed notification happens before governor was initiated while kernel is booting, a NULL pointer dereference will be triggered: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [] __cpufreq_governor+0x23/0x1e0 PGD 0 Oops: 0000 [#1] SMP ... ... RIP: 0010:[] [] __cpufreq_governor+0x23/0x1e0 RSP: 0018:ffff881fcfbcfbb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff881fd11b3980 RCX: ffff88407fc20000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff881fd11b3980 RBP: ffff881fcfbcfbd8 R08: 0000000000000000 R09: 000000000000000f R10: ffffffff818068d0 R11: 0000000000000043 R12: 0000000000000004 R13: 0000000000000000 R14: ffffffff8196cae0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff881fffc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 00000000018ae000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:3 (pid: 750, threadinfo ffff881fcfbce000, task ffff881fcf556400) Stack: ffff881fffc17d00 ffff881fcfbcfc18 ffff881fd11b3980 0000000000000000 ffff881fcfbcfc08 ffffffff81470d08 ffff881fd11b3980 0000000000000007 ffff881fcfbcfc18 ffff881fffc17d00 ffff881fcfbcfd28 ffffffff81472e9a Call Trace: [] __cpufreq_set_policy+0x1b8/0x2e0 [] cpufreq_update_policy+0xca/0x150 [] ? cpufreq_update_policy+0x150/0x150 [] acpi_processor_ppc_has_changed+0x71/0x7b [] acpi_processor_notify+0x55/0x115 [] acpi_device_notify+0x19/0x1b [] acpi_ev_notify_dispatch+0x41/0x5f [] acpi_os_execute_deferred+0x27/0x34 The root cause is a race conditon -- cpufreq core and acpi-cpufreq driver were initiated, but cpufreq_governor wasn't and _PPC changed notification happened, __cpufreq_governor() was called within acpi_os_execute_deferred kernel thread context. To fix this panic issue, add pointer checking code in __cpufreq_governor() before pointer policy->governor is to be dereferenced. Signed-off-by: Ethan Zhao Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index a09a29c312a..46bed4f81cd 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2028,6 +2028,12 @@ static int __cpufreq_governor(struct cpufreq_policy *policy, /* Don't start any governor operations if we are entering suspend */ if (cpufreq_suspended) return 0; + /* + * Governor might not be initiated here if ACPI _PPC changed + * notification happened, so check it. + */ + if (!policy->governor) + return -EINVAL; if (policy->governor->max_transition_latency && policy->cpuinfo.transition_latency > -- cgit v1.2.3-70-g09d2 From 7b09406390e76df97c9f5f29c23a4f56d982f22c Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Tue, 9 Dec 2014 12:34:03 -0800 Subject: Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing If either of the entries was missing, the driver tried to free memory using uninitialized pointer. In addition, it was dereferencing null pointer. Signed-off-by: Ilkka Koskinen Acked-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/acpi_thermal_rel.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c index e4e61b3fb11..231cabc16e1 100644 --- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c @@ -82,7 +82,7 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" }; if (!acpi_has_method(handle, "_TRT")) - return 0; + return -ENODEV; status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -167,7 +167,7 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" }; if (!acpi_has_method(handle, "_ART")) - return 0; + return -ENODEV; status = acpi_evaluate_object(handle, "_ART", NULL, &buffer); if (ACPI_FAILURE(status)) @@ -321,8 +321,8 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd, unsigned long length = 0; int count = 0; char __user *arg = (void __user *)__arg; - struct trt *trts; - struct art *arts; + struct trt *trts = NULL; + struct art *arts = NULL; switch (cmd) { case ACPI_THERMAL_GET_TRT_COUNT: -- cgit v1.2.3-70-g09d2 From 59c56eb6db0c14fe569b1c9625cb850e52d29d88 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 15 Dec 2014 10:15:41 -0800 Subject: thermal/powerclamp: add ids for future xeon cpus Enable Intel Powerclamp driver on Xeon cpu id 0x56, package C-state is available on this CPU for idle injection. Signed-off-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index e98b4249187..6ceebd659dd 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -688,6 +688,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = { { X86_VENDOR_INTEL, 6, 0x45}, { X86_VENDOR_INTEL, 6, 0x46}, { X86_VENDOR_INTEL, 6, 0x4c}, + { X86_VENDOR_INTEL, 6, 0x56}, {} }; MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids); -- cgit v1.2.3-70-g09d2 From fc4de356e033a46a08caf78027df871cc20780c1 Mon Sep 17 00:00:00 2001 From: Javi Merino Date: Mon, 15 Dec 2014 16:55:52 +0000 Subject: thermal: cpu_cooling: document node in struct cpufreq_cooling_device The node field of struct cpufreq_cooling_device was reintroduced in 2dcd851fe4b4 (thermal: cpu_cooling: Update always cpufreq policy with thermal constraints) but without the documentation that it once had. Add it back so that all the fields of struct cpufreq_cooling_device are documented. Cc: Yadwinder Singh Brar Cc: Eduardo Valentin Cc: Zhang Rui Signed-off-by: Javi Merino Signed-off-by: Zhang Rui --- drivers/thermal/cpu_cooling.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index ad09e51ffae..588185abeab 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -39,6 +39,7 @@ * @cpufreq_val: integer value representing the absolute value of the clipped * frequency. * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device. + * @node: list_head to link all cpufreq_cooling_device together. * * This structure is required for keeping information of each * cpufreq_cooling_device registered. In order to prevent corruption of this a -- cgit v1.2.3-70-g09d2 From 0733d1387ed8b845a6b60121f06ddbe9e24f12ea Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Dec 2014 22:14:39 +0100 Subject: thermal: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang --- drivers/thermal/rockchip_thermal.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 1bcddfc60e9..9c6ce548e36 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -677,7 +677,6 @@ static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops, static struct platform_driver rockchip_thermal_driver = { .driver = { .name = "rockchip-thermal", - .owner = THIS_MODULE, .pm = &rockchip_thermal_pm_ops, .of_match_table = of_rockchip_thermal_match, }, -- cgit v1.2.3-70-g09d2 From 0716b0ff0a11ca96e925bfac43a82eb88f75c928 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Dec 2014 22:14:40 +0100 Subject: thermal: int340x_thermal: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/int3400_thermal.c | 1 - drivers/thermal/int340x_thermal/int3402_thermal.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c index dcb306ea14a..65a98a97df0 100644 --- a/drivers/thermal/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -335,7 +335,6 @@ static struct platform_driver int3400_thermal_driver = { .remove = int3400_thermal_remove, .driver = { .name = "int3400 thermal", - .owner = THIS_MODULE, .acpi_match_table = ACPI_PTR(int3400_thermal_match), }, }; diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c index a5d08c14ba2..c5cbc3af3a0 100644 --- a/drivers/thermal/int340x_thermal/int3402_thermal.c +++ b/drivers/thermal/int340x_thermal/int3402_thermal.c @@ -231,7 +231,6 @@ static struct platform_driver int3402_thermal_driver = { .remove = int3402_thermal_remove, .driver = { .name = "int3402 thermal", - .owner = THIS_MODULE, .acpi_match_table = int3402_thermal_match, }, }; -- cgit v1.2.3-70-g09d2 From c0e7dc21d33caa31296d1e4af1e99008359f1b64 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Tue, 16 Dec 2014 13:05:44 -0800 Subject: spi: img-spfi: Enable controller before starting TX DMA It is recommended that the SPFI controller be enabled (i.e. setting SPFI_EN in SPFI_CONTROL) before TX DMA begins. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- drivers/spi/spi-img-spfi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index b410499cddc..cd14556852b 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -390,14 +390,14 @@ static int img_spfi_start_dma(struct spi_master *master, dma_async_issue_pending(spfi->rx_ch); } + spfi_start(spfi); + if (xfer->tx_buf) { spfi->tx_dma_busy = true; dmaengine_submit(txdesc); dma_async_issue_pending(spfi->tx_ch); } - spfi_start(spfi); - return 1; stop_dma: -- cgit v1.2.3-70-g09d2 From fe13192911507c49002fc4882ef11f75f529a010 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 19 Dec 2014 22:38:18 +0800 Subject: stmmac: Don't init ptp again when resume from suspend/hibernation Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend() doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call stmmac_init_ptp(). This patch also fix a "scheduling while atomic" problem when resume from suspend/hibernation. Because stmmac_init_ptp() will trigger scheduling while stmmac_resume() hold a spinlock. Callgraph of "scheduling while atomic": stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() --> stmmac_ptp_register() --> ptp_clock_register() --> device_create() --> device_create_groups_vargs() --> device_add() --> devtmpfs_create_node() --> wait_for_common() --> schedule_timeout() --> __schedule() Signed-off-by: Huacai Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 118a427d194..8c6b7c1651e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1671,7 +1671,7 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int stmmac_hw_setup(struct net_device *dev) +static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) { struct stmmac_priv *priv = netdev_priv(dev); int ret; @@ -1708,9 +1708,11 @@ static int stmmac_hw_setup(struct net_device *dev) stmmac_mmc_setup(priv); - ret = stmmac_init_ptp(priv); - if (ret && ret != -EOPNOTSUPP) - pr_warn("%s: failed PTP initialisation\n", __func__); + if (init_ptp) { + ret = stmmac_init_ptp(priv); + if (ret && ret != -EOPNOTSUPP) + pr_warn("%s: failed PTP initialisation\n", __func__); + } #ifdef CONFIG_DEBUG_FS ret = stmmac_init_fs(dev); @@ -1787,7 +1789,7 @@ static int stmmac_open(struct net_device *dev) goto init_error; } - ret = stmmac_hw_setup(dev); + ret = stmmac_hw_setup(dev, true); if (ret < 0) { pr_err("%s: Hw setup failed\n", __func__); goto init_error; @@ -3036,7 +3038,7 @@ int stmmac_resume(struct net_device *ndev) netif_device_attach(ndev); init_dma_desc_rings(ndev, GFP_ATOMIC); - stmmac_hw_setup(ndev); + stmmac_hw_setup(ndev, false); stmmac_init_tx_coalesce(priv); napi_enable(&priv->napi); -- cgit v1.2.3-70-g09d2 From 8acdf999accfd95093db17f33a58429a38782060 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 20 Dec 2014 11:23:27 +1100 Subject: virtio_net: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b8bd7191572..5ca97713bfb 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -760,7 +760,6 @@ static int virtnet_poll(struct napi_struct *napi, int budget) container_of(napi, struct receive_queue, napi); unsigned int r, received = 0; -again: received += virtnet_receive(rq, budget - received); /* Out of packets? */ @@ -771,7 +770,6 @@ again: napi_schedule_prep(napi)) { virtqueue_disable_cb(rq->vq); __napi_schedule(napi); - goto again; } } -- cgit v1.2.3-70-g09d2 From c51ed18257e731e15541324cd58bd3761d9d3b1c Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 19 Dec 2014 18:25:18 -0800 Subject: hyperv: Fix some variable name typos in send-buffer init/revoke The changed names are union fields with the same size, so the existing code still works. But, we now update these variables to the correct names. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/hyperv_net.h | 1 + drivers/net/hyperv/netvsc.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index 2f48f790c9b..384ca4f4de4 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -590,6 +590,7 @@ struct nvsp_message { #define NETVSC_RECEIVE_BUFFER_ID 0xcafe +#define NETVSC_SEND_BUFFER_ID 0 #define NETVSC_PACKET_SIZE 4096 diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index dd867e6cabd..9f49c0129a7 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -161,8 +161,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) /* Deal with the send buffer we may have setup. * If we got a send section size, it means we received a - * SendsendBufferComplete msg (ie sent - * NvspMessage1TypeSendReceiveBuffer msg) therefore, we need + * NVSP_MSG1_TYPE_SEND_SEND_BUF_COMPLETE msg (ie sent + * NVSP_MSG1_TYPE_SEND_SEND_BUF msg) therefore, we need * to send a revoke msg here */ if (net_device->send_section_size) { @@ -172,7 +172,8 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) revoke_packet->hdr.msg_type = NVSP_MSG1_TYPE_REVOKE_SEND_BUF; - revoke_packet->msg.v1_msg.revoke_recv_buf.id = 0; + revoke_packet->msg.v1_msg.revoke_send_buf.id = + NETVSC_SEND_BUFFER_ID; ret = vmbus_sendpacket(net_device->dev->channel, revoke_packet, @@ -204,7 +205,7 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device) net_device->send_buf_gpadl_handle = 0; } if (net_device->send_buf) { - /* Free up the receive buffer */ + /* Free up the send buffer */ vfree(net_device->send_buf); net_device->send_buf = NULL; } @@ -339,9 +340,9 @@ static int netvsc_init_buf(struct hv_device *device) init_packet = &net_device->channel_init_pkt; memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF; - init_packet->msg.v1_msg.send_recv_buf.gpadl_handle = + init_packet->msg.v1_msg.send_send_buf.gpadl_handle = net_device->send_buf_gpadl_handle; - init_packet->msg.v1_msg.send_recv_buf.id = 0; + init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID; /* Send the gpadl notification request */ ret = vmbus_sendpacket(device->channel, init_packet, @@ -364,7 +365,7 @@ static int netvsc_init_buf(struct hv_device *device) netdev_err(ndev, "Unable to complete send buffer " "initialization with NetVsp - status %d\n", init_packet->msg.v1_msg. - send_recv_buf_complete.status); + send_send_buf_complete.status); ret = -EINVAL; goto cleanup; } -- cgit v1.2.3-70-g09d2 From 05b0aa579397b734f127af58e401a30784a1e315 Mon Sep 17 00:00:00 2001 From: Prashant Sreedharan Date: Sat, 20 Dec 2014 12:16:17 -0800 Subject: tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland Reported-by: Marcelo Ricardo Leitner Signed-off-by: Prashant Sreedharan Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bb48a610b72..553dcd8a9df 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17800,23 +17800,6 @@ static int tg3_init_one(struct pci_dev *pdev, goto err_out_apeunmap; } - /* - * Reset chip in case UNDI or EFI driver did not shutdown - * DMA self test will enable WDMAC and we'll see (spurious) - * pending DMA on the PCI bus at that point. - */ - if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || - (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - } - - err = tg3_test_dma(tp); - if (err) { - dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); - goto err_out_apeunmap; - } - intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW; rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW; sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW; @@ -17861,6 +17844,23 @@ static int tg3_init_one(struct pci_dev *pdev, sndmbx += 0xc; } + /* + * Reset chip in case UNDI or EFI driver did not shutdown + * DMA self test will enable WDMAC and we'll see (spurious) + * pending DMA on the PCI bus at that point. + */ + if ((tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE) || + (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + } + + err = tg3_test_dma(tp); + if (err) { + dev_err(&pdev->dev, "DMA engine test failed, aborting\n"); + goto err_out_apeunmap; + } + tg3_init_coal(tp); pci_set_drvdata(pdev, dev); -- cgit v1.2.3-70-g09d2 From 62633b8adb1b4c675b6f1bedc44eaa9062b02301 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Sun, 21 Dec 2014 18:41:38 +0100 Subject: net: ethernet: micrel: ksz884x.c: Remove unused function Remove the function port_cfg_dis_learn() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ksz884x.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index f1ebed6c63b..2fa6ae026e4 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -2303,12 +2303,6 @@ static inline int port_chk_force_flow_ctrl(struct ksz_hw *hw, int p) /* Spanning Tree */ -static inline void port_cfg_dis_learn(struct ksz_hw *hw, int p, int set) -{ - port_cfg(hw, p, - KS8842_PORT_CTRL_2_OFFSET, PORT_LEARN_DISABLE, set); -} - static inline void port_cfg_rx(struct ksz_hw *hw, int p, int set) { port_cfg(hw, p, -- cgit v1.2.3-70-g09d2 From f3ba9d490d6e9371bbda5f45a22b6b3313125f97 Mon Sep 17 00:00:00 2001 From: Daniel Glöckner Date: Sun, 21 Dec 2014 20:27:39 +0100 Subject: net: s6gmac: remove driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The s6000 Xtensa support has been removed from the kernel in 4006e565e1500db4. There are no other chips using this driver. While the Mentor/Alcatel PE-MCXMAC IP core is also used in other designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere ET-1310, Netlogic XLR/XLS), none of these use this driver as it heavily depends on the s6000 DMA engine. In fact, there is no code sharing across any of the aforementioned devices. Signed-off-by: Daniel Glöckner Signed-off-by: David S. Miller --- drivers/net/ethernet/Kconfig | 12 - drivers/net/ethernet/Makefile | 1 - drivers/net/ethernet/s6gmac.c | 1058 ----------------------------------------- 3 files changed, 1071 deletions(-) delete mode 100644 drivers/net/ethernet/s6gmac.c (limited to 'drivers') diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index df76050d0a9..eadcb053807 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -156,18 +156,6 @@ source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rdc/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" - -config S6GMAC - tristate "S6105 GMAC ethernet support" - depends on XTENSA_VARIANT_S6000 - select PHYLIB - ---help--- - This driver supports the on chip ethernet device on the - S6105 xtensa processor. - - To compile this driver as a module, choose M here. The module - will be called s6gmac. - source "drivers/net/ethernet/samsung/Kconfig" source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/silan/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index bf56f8b36e9..1367afcd0a8 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -66,7 +66,6 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SH_ETH) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/ -obj-$(CONFIG_S6GMAC) += s6gmac.o obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/ obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ diff --git a/drivers/net/ethernet/s6gmac.c b/drivers/net/ethernet/s6gmac.c deleted file mode 100644 index f537cbea20e..00000000000 --- a/drivers/net/ethernet/s6gmac.c +++ /dev/null @@ -1,1058 +0,0 @@ -/* - * Ethernet driver for S6105 on chip network device - * (c)2008 emlix GmbH http://www.emlix.com - * Authors: Oskar Schirmer - * Daniel Gloeckner - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "s6gmac" -#define DRV_PRMT DRV_NAME ": " - - -/* register declarations */ - -#define S6_GMAC_MACCONF1 0x000 -#define S6_GMAC_MACCONF1_TXENA 0 -#define S6_GMAC_MACCONF1_SYNCTX 1 -#define S6_GMAC_MACCONF1_RXENA 2 -#define S6_GMAC_MACCONF1_SYNCRX 3 -#define S6_GMAC_MACCONF1_TXFLOWCTRL 4 -#define S6_GMAC_MACCONF1_RXFLOWCTRL 5 -#define S6_GMAC_MACCONF1_LOOPBACK 8 -#define S6_GMAC_MACCONF1_RESTXFUNC 16 -#define S6_GMAC_MACCONF1_RESRXFUNC 17 -#define S6_GMAC_MACCONF1_RESTXMACCTRL 18 -#define S6_GMAC_MACCONF1_RESRXMACCTRL 19 -#define S6_GMAC_MACCONF1_SIMULRES 30 -#define S6_GMAC_MACCONF1_SOFTRES 31 -#define S6_GMAC_MACCONF2 0x004 -#define S6_GMAC_MACCONF2_FULL 0 -#define S6_GMAC_MACCONF2_CRCENA 1 -#define S6_GMAC_MACCONF2_PADCRCENA 2 -#define S6_GMAC_MACCONF2_LENGTHFCHK 4 -#define S6_GMAC_MACCONF2_HUGEFRAMENA 5 -#define S6_GMAC_MACCONF2_IFMODE 8 -#define S6_GMAC_MACCONF2_IFMODE_NIBBLE 1 -#define S6_GMAC_MACCONF2_IFMODE_BYTE 2 -#define S6_GMAC_MACCONF2_IFMODE_MASK 3 -#define S6_GMAC_MACCONF2_PREAMBLELEN 12 -#define S6_GMAC_MACCONF2_PREAMBLELEN_MASK 0x0F -#define S6_GMAC_MACIPGIFG 0x008 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP 0 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP_MASK 0x7F -#define S6_GMAC_MACIPGIFG_MINIFGENFORCE 8 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP2 16 -#define S6_GMAC_MACIPGIFG_B2BINTERPGAP1 24 -#define S6_GMAC_MACHALFDUPLEX 0x00C -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN 0 -#define S6_GMAC_MACHALFDUPLEX_COLLISWIN_MASK 0x3F -#define S6_GMAC_MACHALFDUPLEX_RETXMAX 12 -#define S6_GMAC_MACHALFDUPLEX_RETXMAX_MASK 0x0F -#define S6_GMAC_MACHALFDUPLEX_EXCESSDEF 16 -#define S6_GMAC_MACHALFDUPLEX_NOBACKOFF 17 -#define S6_GMAC_MACHALFDUPLEX_BPNOBCKOF 18 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBENA 19 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTRN 20 -#define S6_GMAC_MACHALFDUPLEX_ALTBEBTR_MASK 0x0F -#define S6_GMAC_MACMAXFRAMELEN 0x010 -#define S6_GMAC_MACMIICONF 0x020 -#define S6_GMAC_MACMIICONF_CSEL 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV10 0 -#define S6_GMAC_MACMIICONF_CSEL_DIV12 1 -#define S6_GMAC_MACMIICONF_CSEL_DIV14 2 -#define S6_GMAC_MACMIICONF_CSEL_DIV18 3 -#define S6_GMAC_MACMIICONF_CSEL_DIV24 4 -#define S6_GMAC_MACMIICONF_CSEL_DIV34 5 -#define S6_GMAC_MACMIICONF_CSEL_DIV68 6 -#define S6_GMAC_MACMIICONF_CSEL_DIV168 7 -#define S6_GMAC_MACMIICONF_CSEL_MASK 7 -#define S6_GMAC_MACMIICONF_PREAMBLESUPR 4 -#define S6_GMAC_MACMIICONF_SCANAUTOINCR 5 -#define S6_GMAC_MACMIICMD 0x024 -#define S6_GMAC_MACMIICMD_READ 0 -#define S6_GMAC_MACMIICMD_SCAN 1 -#define S6_GMAC_MACMIIADDR 0x028 -#define S6_GMAC_MACMIIADDR_REG 0 -#define S6_GMAC_MACMIIADDR_REG_MASK 0x1F -#define S6_GMAC_MACMIIADDR_PHY 8 -#define S6_GMAC_MACMIIADDR_PHY_MASK 0x1F -#define S6_GMAC_MACMIICTRL 0x02C -#define S6_GMAC_MACMIISTAT 0x030 -#define S6_GMAC_MACMIIINDI 0x034 -#define S6_GMAC_MACMIIINDI_BUSY 0 -#define S6_GMAC_MACMIIINDI_SCAN 1 -#define S6_GMAC_MACMIIINDI_INVAL 2 -#define S6_GMAC_MACINTERFSTAT 0x03C -#define S6_GMAC_MACINTERFSTAT_LINKFAIL 3 -#define S6_GMAC_MACINTERFSTAT_EXCESSDEF 9 -#define S6_GMAC_MACSTATADDR1 0x040 -#define S6_GMAC_MACSTATADDR2 0x044 - -#define S6_GMAC_FIFOCONF0 0x048 -#define S6_GMAC_FIFOCONF0_HSTRSTWT 0 -#define S6_GMAC_FIFOCONF0_HSTRSTSR 1 -#define S6_GMAC_FIFOCONF0_HSTRSTFR 2 -#define S6_GMAC_FIFOCONF0_HSTRSTST 3 -#define S6_GMAC_FIFOCONF0_HSTRSTFT 4 -#define S6_GMAC_FIFOCONF0_WTMENREQ 8 -#define S6_GMAC_FIFOCONF0_SRFENREQ 9 -#define S6_GMAC_FIFOCONF0_FRFENREQ 10 -#define S6_GMAC_FIFOCONF0_STFENREQ 11 -#define S6_GMAC_FIFOCONF0_FTFENREQ 12 -#define S6_GMAC_FIFOCONF0_WTMENRPLY 16 -#define S6_GMAC_FIFOCONF0_SRFENRPLY 17 -#define S6_GMAC_FIFOCONF0_FRFENRPLY 18 -#define S6_GMAC_FIFOCONF0_STFENRPLY 19 -#define S6_GMAC_FIFOCONF0_FTFENRPLY 20 -#define S6_GMAC_FIFOCONF1 0x04C -#define S6_GMAC_FIFOCONF2 0x050 -#define S6_GMAC_FIFOCONF2_CFGLWM 0 -#define S6_GMAC_FIFOCONF2_CFGHWM 16 -#define S6_GMAC_FIFOCONF3 0x054 -#define S6_GMAC_FIFOCONF3_CFGFTTH 0 -#define S6_GMAC_FIFOCONF3_CFGHWMFT 16 -#define S6_GMAC_FIFOCONF4 0x058 -#define S6_GMAC_FIFOCONF_RSV_PREVDROP 0 -#define S6_GMAC_FIFOCONF_RSV_RUNT 1 -#define S6_GMAC_FIFOCONF_RSV_FALSECAR 2 -#define S6_GMAC_FIFOCONF_RSV_CODEERR 3 -#define S6_GMAC_FIFOCONF_RSV_CRCERR 4 -#define S6_GMAC_FIFOCONF_RSV_LENGTHERR 5 -#define S6_GMAC_FIFOCONF_RSV_LENRANGE 6 -#define S6_GMAC_FIFOCONF_RSV_OK 7 -#define S6_GMAC_FIFOCONF_RSV_MULTICAST 8 -#define S6_GMAC_FIFOCONF_RSV_BROADCAST 9 -#define S6_GMAC_FIFOCONF_RSV_DRIBBLE 10 -#define S6_GMAC_FIFOCONF_RSV_CTRLFRAME 11 -#define S6_GMAC_FIFOCONF_RSV_PAUSECTRL 12 -#define S6_GMAC_FIFOCONF_RSV_UNOPCODE 13 -#define S6_GMAC_FIFOCONF_RSV_VLANTAG 14 -#define S6_GMAC_FIFOCONF_RSV_LONGEVENT 15 -#define S6_GMAC_FIFOCONF_RSV_TRUNCATED 16 -#define S6_GMAC_FIFOCONF_RSV_MASK 0x3FFFF -#define S6_GMAC_FIFOCONF5 0x05C -#define S6_GMAC_FIFOCONF5_DROPLT64 18 -#define S6_GMAC_FIFOCONF5_CFGBYTM 19 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE 20 -#define S6_GMAC_FIFOCONF5_RXDROPSIZE_MASK 0xF - -#define S6_GMAC_STAT_REGS 0x080 -#define S6_GMAC_STAT_SIZE_MIN 12 -#define S6_GMAC_STATTR64 0x080 -#define S6_GMAC_STATTR64_SIZE 18 -#define S6_GMAC_STATTR127 0x084 -#define S6_GMAC_STATTR127_SIZE 18 -#define S6_GMAC_STATTR255 0x088 -#define S6_GMAC_STATTR255_SIZE 18 -#define S6_GMAC_STATTR511 0x08C -#define S6_GMAC_STATTR511_SIZE 18 -#define S6_GMAC_STATTR1K 0x090 -#define S6_GMAC_STATTR1K_SIZE 18 -#define S6_GMAC_STATTRMAX 0x094 -#define S6_GMAC_STATTRMAX_SIZE 18 -#define S6_GMAC_STATTRMGV 0x098 -#define S6_GMAC_STATTRMGV_SIZE 18 -#define S6_GMAC_STATRBYT 0x09C -#define S6_GMAC_STATRBYT_SIZE 24 -#define S6_GMAC_STATRPKT 0x0A0 -#define S6_GMAC_STATRPKT_SIZE 18 -#define S6_GMAC_STATRFCS 0x0A4 -#define S6_GMAC_STATRFCS_SIZE 12 -#define S6_GMAC_STATRMCA 0x0A8 -#define S6_GMAC_STATRMCA_SIZE 18 -#define S6_GMAC_STATRBCA 0x0AC -#define S6_GMAC_STATRBCA_SIZE 22 -#define S6_GMAC_STATRXCF 0x0B0 -#define S6_GMAC_STATRXCF_SIZE 18 -#define S6_GMAC_STATRXPF 0x0B4 -#define S6_GMAC_STATRXPF_SIZE 12 -#define S6_GMAC_STATRXUO 0x0B8 -#define S6_GMAC_STATRXUO_SIZE 12 -#define S6_GMAC_STATRALN 0x0BC -#define S6_GMAC_STATRALN_SIZE 12 -#define S6_GMAC_STATRFLR 0x0C0 -#define S6_GMAC_STATRFLR_SIZE 16 -#define S6_GMAC_STATRCDE 0x0C4 -#define S6_GMAC_STATRCDE_SIZE 12 -#define S6_GMAC_STATRCSE 0x0C8 -#define S6_GMAC_STATRCSE_SIZE 12 -#define S6_GMAC_STATRUND 0x0CC -#define S6_GMAC_STATRUND_SIZE 12 -#define S6_GMAC_STATROVR 0x0D0 -#define S6_GMAC_STATROVR_SIZE 12 -#define S6_GMAC_STATRFRG 0x0D4 -#define S6_GMAC_STATRFRG_SIZE 12 -#define S6_GMAC_STATRJBR 0x0D8 -#define S6_GMAC_STATRJBR_SIZE 12 -#define S6_GMAC_STATRDRP 0x0DC -#define S6_GMAC_STATRDRP_SIZE 12 -#define S6_GMAC_STATTBYT 0x0E0 -#define S6_GMAC_STATTBYT_SIZE 24 -#define S6_GMAC_STATTPKT 0x0E4 -#define S6_GMAC_STATTPKT_SIZE 18 -#define S6_GMAC_STATTMCA 0x0E8 -#define S6_GMAC_STATTMCA_SIZE 18 -#define S6_GMAC_STATTBCA 0x0EC -#define S6_GMAC_STATTBCA_SIZE 18 -#define S6_GMAC_STATTXPF 0x0F0 -#define S6_GMAC_STATTXPF_SIZE 12 -#define S6_GMAC_STATTDFR 0x0F4 -#define S6_GMAC_STATTDFR_SIZE 12 -#define S6_GMAC_STATTEDF 0x0F8 -#define S6_GMAC_STATTEDF_SIZE 12 -#define S6_GMAC_STATTSCL 0x0FC -#define S6_GMAC_STATTSCL_SIZE 12 -#define S6_GMAC_STATTMCL 0x100 -#define S6_GMAC_STATTMCL_SIZE 12 -#define S6_GMAC_STATTLCL 0x104 -#define S6_GMAC_STATTLCL_SIZE 12 -#define S6_GMAC_STATTXCL 0x108 -#define S6_GMAC_STATTXCL_SIZE 12 -#define S6_GMAC_STATTNCL 0x10C -#define S6_GMAC_STATTNCL_SIZE 13 -#define S6_GMAC_STATTPFH 0x110 -#define S6_GMAC_STATTPFH_SIZE 12 -#define S6_GMAC_STATTDRP 0x114 -#define S6_GMAC_STATTDRP_SIZE 12 -#define S6_GMAC_STATTJBR 0x118 -#define S6_GMAC_STATTJBR_SIZE 12 -#define S6_GMAC_STATTFCS 0x11C -#define S6_GMAC_STATTFCS_SIZE 12 -#define S6_GMAC_STATTXCF 0x120 -#define S6_GMAC_STATTXCF_SIZE 12 -#define S6_GMAC_STATTOVR 0x124 -#define S6_GMAC_STATTOVR_SIZE 12 -#define S6_GMAC_STATTUND 0x128 -#define S6_GMAC_STATTUND_SIZE 12 -#define S6_GMAC_STATTFRG 0x12C -#define S6_GMAC_STATTFRG_SIZE 12 -#define S6_GMAC_STATCARRY(n) (0x130 + 4*(n)) -#define S6_GMAC_STATCARRYMSK(n) (0x138 + 4*(n)) -#define S6_GMAC_STATCARRY1_RDRP 0 -#define S6_GMAC_STATCARRY1_RJBR 1 -#define S6_GMAC_STATCARRY1_RFRG 2 -#define S6_GMAC_STATCARRY1_ROVR 3 -#define S6_GMAC_STATCARRY1_RUND 4 -#define S6_GMAC_STATCARRY1_RCSE 5 -#define S6_GMAC_STATCARRY1_RCDE 6 -#define S6_GMAC_STATCARRY1_RFLR 7 -#define S6_GMAC_STATCARRY1_RALN 8 -#define S6_GMAC_STATCARRY1_RXUO 9 -#define S6_GMAC_STATCARRY1_RXPF 10 -#define S6_GMAC_STATCARRY1_RXCF 11 -#define S6_GMAC_STATCARRY1_RBCA 12 -#define S6_GMAC_STATCARRY1_RMCA 13 -#define S6_GMAC_STATCARRY1_RFCS 14 -#define S6_GMAC_STATCARRY1_RPKT 15 -#define S6_GMAC_STATCARRY1_RBYT 16 -#define S6_GMAC_STATCARRY1_TRMGV 25 -#define S6_GMAC_STATCARRY1_TRMAX 26 -#define S6_GMAC_STATCARRY1_TR1K 27 -#define S6_GMAC_STATCARRY1_TR511 28 -#define S6_GMAC_STATCARRY1_TR255 29 -#define S6_GMAC_STATCARRY1_TR127 30 -#define S6_GMAC_STATCARRY1_TR64 31 -#define S6_GMAC_STATCARRY2_TDRP 0 -#define S6_GMAC_STATCARRY2_TPFH 1 -#define S6_GMAC_STATCARRY2_TNCL 2 -#define S6_GMAC_STATCARRY2_TXCL 3 -#define S6_GMAC_STATCARRY2_TLCL 4 -#define S6_GMAC_STATCARRY2_TMCL 5 -#define S6_GMAC_STATCARRY2_TSCL 6 -#define S6_GMAC_STATCARRY2_TEDF 7 -#define S6_GMAC_STATCARRY2_TDFR 8 -#define S6_GMAC_STATCARRY2_TXPF 9 -#define S6_GMAC_STATCARRY2_TBCA 10 -#define S6_GMAC_STATCARRY2_TMCA 11 -#define S6_GMAC_STATCARRY2_TPKT 12 -#define S6_GMAC_STATCARRY2_TBYT 13 -#define S6_GMAC_STATCARRY2_TFRG 14 -#define S6_GMAC_STATCARRY2_TUND 15 -#define S6_GMAC_STATCARRY2_TOVR 16 -#define S6_GMAC_STATCARRY2_TXCF 17 -#define S6_GMAC_STATCARRY2_TFCS 18 -#define S6_GMAC_STATCARRY2_TJBR 19 - -#define S6_GMAC_HOST_PBLKCTRL 0x140 -#define S6_GMAC_HOST_PBLKCTRL_TXENA 0 -#define S6_GMAC_HOST_PBLKCTRL_RXENA 1 -#define S6_GMAC_HOST_PBLKCTRL_TXSRES 2 -#define S6_GMAC_HOST_PBLKCTRL_RXSRES 3 -#define S6_GMAC_HOST_PBLKCTRL_TXBSIZ 8 -#define S6_GMAC_HOST_PBLKCTRL_RXBSIZ 12 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_16 4 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_32 5 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_64 6 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_128 7 -#define S6_GMAC_HOST_PBLKCTRL_SIZ_MASK 0xF -#define S6_GMAC_HOST_PBLKCTRL_STATENA 16 -#define S6_GMAC_HOST_PBLKCTRL_STATAUTOZ 17 -#define S6_GMAC_HOST_PBLKCTRL_STATCLEAR 18 -#define S6_GMAC_HOST_PBLKCTRL_RGMII 19 -#define S6_GMAC_HOST_INTMASK 0x144 -#define S6_GMAC_HOST_INTSTAT 0x148 -#define S6_GMAC_HOST_INT_TXBURSTOVER 3 -#define S6_GMAC_HOST_INT_TXPREWOVER 4 -#define S6_GMAC_HOST_INT_RXBURSTUNDER 5 -#define S6_GMAC_HOST_INT_RXPOSTRFULL 6 -#define S6_GMAC_HOST_INT_RXPOSTRUNDER 7 -#define S6_GMAC_HOST_RXFIFOHWM 0x14C -#define S6_GMAC_HOST_CTRLFRAMXP 0x150 -#define S6_GMAC_HOST_DSTADDRLO(n) (0x160 + 8*(n)) -#define S6_GMAC_HOST_DSTADDRHI(n) (0x164 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKLO(n) (0x180 + 8*(n)) -#define S6_GMAC_HOST_DSTMASKHI(n) (0x184 + 8*(n)) - -#define S6_GMAC_BURST_PREWR 0x1B0 -#define S6_GMAC_BURST_PREWR_LEN 0 -#define S6_GMAC_BURST_PREWR_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_PREWR_CFE 20 -#define S6_GMAC_BURST_PREWR_PPE 21 -#define S6_GMAC_BURST_PREWR_FCS 22 -#define S6_GMAC_BURST_PREWR_PAD 23 -#define S6_GMAC_BURST_POSTRD 0x1D0 -#define S6_GMAC_BURST_POSTRD_LEN 0 -#define S6_GMAC_BURST_POSTRD_LEN_MASK ((1 << 20) - 1) -#define S6_GMAC_BURST_POSTRD_DROP 20 - - -/* data handling */ - -#define S6_NUM_TX_SKB 8 /* must be larger than TX fifo size */ -#define S6_NUM_RX_SKB 16 -#define S6_MAX_FRLEN 1536 - -struct s6gmac { - u32 reg; - u32 tx_dma; - u32 rx_dma; - u32 io; - u8 tx_chan; - u8 rx_chan; - spinlock_t lock; - u8 tx_skb_i, tx_skb_o; - u8 rx_skb_i, rx_skb_o; - struct sk_buff *tx_skb[S6_NUM_TX_SKB]; - struct sk_buff *rx_skb[S6_NUM_RX_SKB]; - unsigned long carry[sizeof(struct net_device_stats) / sizeof(long)]; - unsigned long stats[sizeof(struct net_device_stats) / sizeof(long)]; - struct phy_device *phydev; - struct { - struct mii_bus *bus; - int irq[PHY_MAX_ADDR]; - } mii; - struct { - unsigned int mbit; - u8 giga; - u8 isup; - u8 full; - } link; -}; - -static void s6gmac_rx_fillfifo(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct sk_buff *skb; - while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) && - (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) && - (skb = netdev_alloc_skb(dev, S6_MAX_FRLEN + 2))) { - pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb; - s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan, - pd->io, (u32)skb->data, S6_MAX_FRLEN); - } -} - -static void s6gmac_rx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 pfx; - struct sk_buff *skb; - while (((u8)(pd->rx_skb_i - pd->rx_skb_o)) > - s6dmac_pending_count(pd->rx_dma, pd->rx_chan)) { - skb = pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]; - pfx = readl(pd->reg + S6_GMAC_BURST_POSTRD); - if (pfx & (1 << S6_GMAC_BURST_POSTRD_DROP)) { - dev_kfree_skb_irq(skb); - } else { - skb_put(skb, (pfx >> S6_GMAC_BURST_POSTRD_LEN) - & S6_GMAC_BURST_POSTRD_LEN_MASK); - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_UNNECESSARY; - netif_rx(skb); - } - } -} - -static void s6gmac_tx_interrupt(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - while (((u8)(pd->tx_skb_i - pd->tx_skb_o)) > - s6dmac_pending_count(pd->tx_dma, pd->tx_chan)) { - dev_kfree_skb_irq(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - } - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); -} - -struct s6gmac_statinf { - unsigned reg_size : 4; /* 0: unused */ - unsigned reg_off : 6; - unsigned net_index : 6; -}; - -#define S6_STATS_B (8 * sizeof(u32)) -#define S6_STATS_C(b, r, f) [b] = { \ - BUILD_BUG_ON_ZERO(r##_SIZE < S6_GMAC_STAT_SIZE_MIN) + \ - BUILD_BUG_ON_ZERO((r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1)) \ - >= (1<<4)) + \ - r##_SIZE - (S6_GMAC_STAT_SIZE_MIN - 1), \ - BUILD_BUG_ON_ZERO(((unsigned)((r - S6_GMAC_STAT_REGS) / sizeof(u32))) \ - >= ((1<<6)-1)) + \ - (r - S6_GMAC_STAT_REGS) / sizeof(u32), \ - BUILD_BUG_ON_ZERO((offsetof(struct net_device_stats, f)) \ - % sizeof(unsigned long)) + \ - BUILD_BUG_ON_ZERO((((unsigned)(offsetof(struct net_device_stats, f)) \ - / sizeof(unsigned long)) >= (1<<6))) + \ - BUILD_BUG_ON_ZERO((sizeof(((struct net_device_stats *)0)->f) \ - != sizeof(unsigned long))) + \ - (offsetof(struct net_device_stats, f)) / sizeof(unsigned long)}, - -static const struct s6gmac_statinf statinf[2][S6_STATS_B] = { { - S6_STATS_C(S6_GMAC_STATCARRY1_RBYT, S6_GMAC_STATRBYT, rx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY1_RPKT, S6_GMAC_STATRPKT, rx_packets) - S6_STATS_C(S6_GMAC_STATCARRY1_RFCS, S6_GMAC_STATRFCS, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RMCA, S6_GMAC_STATRMCA, multicast) - S6_STATS_C(S6_GMAC_STATCARRY1_RALN, S6_GMAC_STATRALN, rx_frame_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFLR, S6_GMAC_STATRFLR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RCDE, S6_GMAC_STATRCDE, rx_missed_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RUND, S6_GMAC_STATRUND, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_ROVR, S6_GMAC_STATROVR, rx_length_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RFRG, S6_GMAC_STATRFRG, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RJBR, S6_GMAC_STATRJBR, rx_crc_errors) - S6_STATS_C(S6_GMAC_STATCARRY1_RDRP, S6_GMAC_STATRDRP, rx_dropped) -}, { - S6_STATS_C(S6_GMAC_STATCARRY2_TBYT, S6_GMAC_STATTBYT, tx_bytes) - S6_STATS_C(S6_GMAC_STATCARRY2_TPKT, S6_GMAC_STATTPKT, tx_packets) - S6_STATS_C(S6_GMAC_STATCARRY2_TEDF, S6_GMAC_STATTEDF, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TXCL, S6_GMAC_STATTXCL, tx_aborted_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TNCL, S6_GMAC_STATTNCL, collisions) - S6_STATS_C(S6_GMAC_STATCARRY2_TDRP, S6_GMAC_STATTDRP, tx_dropped) - S6_STATS_C(S6_GMAC_STATCARRY2_TJBR, S6_GMAC_STATTJBR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFCS, S6_GMAC_STATTFCS, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TOVR, S6_GMAC_STATTOVR, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TUND, S6_GMAC_STATTUND, tx_errors) - S6_STATS_C(S6_GMAC_STATCARRY2_TFRG, S6_GMAC_STATTFRG, tx_errors) -} }; - -static void s6gmac_stats_collect(struct s6gmac *pd, - const struct s6gmac_statinf *inf) -{ - int b; - for (b = 0; b < S6_STATS_B; b++) { - if (inf[b].reg_size) { - pd->stats[inf[b].net_index] += - readl(pd->reg + S6_GMAC_STAT_REGS - + sizeof(u32) * inf[b].reg_off); - } - } -} - -static void s6gmac_stats_carry(struct s6gmac *pd, - const struct s6gmac_statinf *inf, u32 mask) -{ - int b; - while (mask) { - b = fls(mask) - 1; - mask &= ~(1 << b); - pd->carry[inf[b].net_index] += (1 << inf[b].reg_size); - } -} - -static inline u32 s6gmac_stats_pending(struct s6gmac *pd, int carry) -{ - int r = readl(pd->reg + S6_GMAC_STATCARRY(carry)) & - ~readl(pd->reg + S6_GMAC_STATCARRYMSK(carry)); - return r; -} - -static inline void s6gmac_stats_interrupt(struct s6gmac *pd, int carry) -{ - u32 mask; - mask = s6gmac_stats_pending(pd, carry); - if (mask) { - writel(mask, pd->reg + S6_GMAC_STATCARRY(carry)); - s6gmac_stats_carry(pd, &statinf[carry][0], mask); - } -} - -static irqreturn_t s6gmac_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct s6gmac *pd = netdev_priv(dev); - if (!dev) - return IRQ_NONE; - spin_lock(&pd->lock); - if (s6dmac_termcnt_irq(pd->rx_dma, pd->rx_chan)) - s6gmac_rx_interrupt(dev); - s6gmac_rx_fillfifo(dev); - if (s6dmac_termcnt_irq(pd->tx_dma, pd->tx_chan)) - s6gmac_tx_interrupt(dev); - s6gmac_stats_interrupt(pd, 0); - s6gmac_stats_interrupt(pd, 1); - spin_unlock(&pd->lock); - return IRQ_HANDLED; -} - -static inline void s6gmac_set_dstaddr(struct s6gmac *pd, int n, - u32 addrlo, u32 addrhi, u32 masklo, u32 maskhi) -{ - writel(addrlo, pd->reg + S6_GMAC_HOST_DSTADDRLO(n)); - writel(addrhi, pd->reg + S6_GMAC_HOST_DSTADDRHI(n)); - writel(masklo, pd->reg + S6_GMAC_HOST_DSTMASKLO(n)); - writel(maskhi, pd->reg + S6_GMAC_HOST_DSTMASKHI(n)); -} - -static inline void s6gmac_stop_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - writel(0, pd->reg + S6_GMAC_MACCONF1); -} - -static inline void s6gmac_init_device(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int is_rgmii = !!(pd->phydev->supported - & (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)); -#if 0 - writel(1 << S6_GMAC_MACCONF1_SYNCTX | - 1 << S6_GMAC_MACCONF1_SYNCRX | - 1 << S6_GMAC_MACCONF1_TXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RXFLOWCTRL | - 1 << S6_GMAC_MACCONF1_RESTXFUNC | - 1 << S6_GMAC_MACCONF1_RESRXFUNC | - 1 << S6_GMAC_MACCONF1_RESTXMACCTRL | - 1 << S6_GMAC_MACCONF1_RESRXMACCTRL, - pd->reg + S6_GMAC_MACCONF1); -#endif - writel(1 << S6_GMAC_MACCONF1_SOFTRES, pd->reg + S6_GMAC_MACCONF1); - udelay(1000); - writel(1 << S6_GMAC_MACCONF1_TXENA | 1 << S6_GMAC_MACCONF1_RXENA, - pd->reg + S6_GMAC_MACCONF1); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXSRES | - 1 << S6_GMAC_HOST_PBLKCTRL_RXSRES, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); - writel(1 << S6_GMAC_MACCONF1_TXENA | - 1 << S6_GMAC_MACCONF1_RXENA | - (dev->flags & IFF_LOOPBACK ? 1 : 0) - << S6_GMAC_MACCONF1_LOOPBACK, - pd->reg + S6_GMAC_MACCONF1); - writel(dev->mtu && (dev->mtu < (S6_MAX_FRLEN - ETH_HLEN-ETH_FCS_LEN)) ? - dev->mtu+ETH_HLEN+ETH_FCS_LEN : S6_MAX_FRLEN, - pd->reg + S6_GMAC_MACMAXFRAMELEN); - writel((pd->link.full ? 1 : 0) << S6_GMAC_MACCONF2_FULL | - 1 << S6_GMAC_MACCONF2_PADCRCENA | - 1 << S6_GMAC_MACCONF2_LENGTHFCHK | - (pd->link.giga ? - S6_GMAC_MACCONF2_IFMODE_BYTE : - S6_GMAC_MACCONF2_IFMODE_NIBBLE) - << S6_GMAC_MACCONF2_IFMODE | - 7 << S6_GMAC_MACCONF2_PREAMBLELEN, - pd->reg + S6_GMAC_MACCONF2); - writel(0, pd->reg + S6_GMAC_MACSTATADDR1); - writel(0, pd->reg + S6_GMAC_MACSTATADDR2); - writel(1 << S6_GMAC_FIFOCONF0_WTMENREQ | - 1 << S6_GMAC_FIFOCONF0_SRFENREQ | - 1 << S6_GMAC_FIFOCONF0_FRFENREQ | - 1 << S6_GMAC_FIFOCONF0_STFENREQ | - 1 << S6_GMAC_FIFOCONF0_FTFENREQ, - pd->reg + S6_GMAC_FIFOCONF0); - writel(128 << S6_GMAC_FIFOCONF3_CFGFTTH | - 128 << S6_GMAC_FIFOCONF3_CFGHWMFT, - pd->reg + S6_GMAC_FIFOCONF3); - writel((S6_GMAC_FIFOCONF_RSV_MASK & ~( - 1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_OK | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED)) | - 1 << S6_GMAC_FIFOCONF5_DROPLT64 | - pd->link.giga << S6_GMAC_FIFOCONF5_CFGBYTM | - 1 << S6_GMAC_FIFOCONF5_RXDROPSIZE, - pd->reg + S6_GMAC_FIFOCONF5); - writel(1 << S6_GMAC_FIFOCONF_RSV_RUNT | - 1 << S6_GMAC_FIFOCONF_RSV_CRCERR | - 1 << S6_GMAC_FIFOCONF_RSV_DRIBBLE | - 1 << S6_GMAC_FIFOCONF_RSV_CTRLFRAME | - 1 << S6_GMAC_FIFOCONF_RSV_PAUSECTRL | - 1 << S6_GMAC_FIFOCONF_RSV_UNOPCODE | - 1 << S6_GMAC_FIFOCONF_RSV_TRUNCATED, - pd->reg + S6_GMAC_FIFOCONF4); - s6gmac_set_dstaddr(pd, 0, - 0xFFFFFFFF, 0x0000FFFF, 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 1, - dev->dev_addr[5] | - dev->dev_addr[4] << 8 | - dev->dev_addr[3] << 16 | - dev->dev_addr[2] << 24, - dev->dev_addr[1] | - dev->dev_addr[0] << 8, - 0xFFFFFFFF, 0x0000FFFF); - s6gmac_set_dstaddr(pd, 2, - 0x00000000, 0x00000100, 0x00000000, 0x00000100); - s6gmac_set_dstaddr(pd, 3, - 0x00000000, 0x00000000, 0x00000000, 0x00000000); - writel(1 << S6_GMAC_HOST_PBLKCTRL_TXENA | - 1 << S6_GMAC_HOST_PBLKCTRL_RXENA | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_TXBSIZ | - S6_GMAC_HOST_PBLKCTRL_SIZ_128 << S6_GMAC_HOST_PBLKCTRL_RXBSIZ | - 1 << S6_GMAC_HOST_PBLKCTRL_STATENA | - 1 << S6_GMAC_HOST_PBLKCTRL_STATCLEAR | - is_rgmii << S6_GMAC_HOST_PBLKCTRL_RGMII, - pd->reg + S6_GMAC_HOST_PBLKCTRL); -} - -static void s6mii_enable(struct s6gmac *pd) -{ - writel(readl(pd->reg + S6_GMAC_MACCONF1) & - ~(1 << S6_GMAC_MACCONF1_SOFTRES), - pd->reg + S6_GMAC_MACCONF1); - writel((readl(pd->reg + S6_GMAC_MACMIICONF) - & ~(S6_GMAC_MACMIICONF_CSEL_MASK << S6_GMAC_MACMIICONF_CSEL)) - | (S6_GMAC_MACMIICONF_CSEL_DIV168 << S6_GMAC_MACMIICONF_CSEL), - pd->reg + S6_GMAC_MACMIICONF); -} - -static int s6mii_busy(struct s6gmac *pd, int tmo) -{ - while (readl(pd->reg + S6_GMAC_MACMIIINDI)) { - if (--tmo == 0) - return -ETIME; - udelay(64); - } - return 0; -} - -static int s6mii_read(struct mii_bus *bus, int phy_addr, int regnum) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(1 << S6_GMAC_MACMIICMD_READ, pd->reg + S6_GMAC_MACMIICMD); - writel(0, pd->reg + S6_GMAC_MACMIICMD); - if (s6mii_busy(pd, 256)) - return -ETIME; - return (u16)readl(pd->reg + S6_GMAC_MACMIISTAT); -} - -static int s6mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, 256)) - return -ETIME; - writel(phy_addr << S6_GMAC_MACMIIADDR_PHY | - regnum << S6_GMAC_MACMIIADDR_REG, - pd->reg + S6_GMAC_MACMIIADDR); - writel(value, pd->reg + S6_GMAC_MACMIICTRL); - if (s6mii_busy(pd, 256)) - return -ETIME; - return 0; -} - -static int s6mii_reset(struct mii_bus *bus) -{ - struct s6gmac *pd = bus->priv; - s6mii_enable(pd); - if (s6mii_busy(pd, PHY_INIT_TIMEOUT)) - return -ETIME; - return 0; -} - -static void s6gmac_set_rgmii_txclock(struct s6gmac *pd) -{ - u32 pllsel = readl(S6_REG_GREG1 + S6_GREG1_PLLSEL); - pllsel &= ~(S6_GREG1_PLLSEL_GMAC_MASK << S6_GREG1_PLLSEL_GMAC); - switch (pd->link.mbit) { - case 10: - pllsel |= S6_GREG1_PLLSEL_GMAC_2500KHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 100: - pllsel |= S6_GREG1_PLLSEL_GMAC_25MHZ << S6_GREG1_PLLSEL_GMAC; - break; - case 1000: - pllsel |= S6_GREG1_PLLSEL_GMAC_125MHZ << S6_GREG1_PLLSEL_GMAC; - break; - default: - return; - } - writel(pllsel, S6_REG_GREG1 + S6_GREG1_PLLSEL); -} - -static inline void s6gmac_linkisup(struct net_device *dev, int isup) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - - pd->link.full = phydev->duplex; - pd->link.giga = (phydev->speed == 1000); - if (pd->link.mbit != phydev->speed) { - pd->link.mbit = phydev->speed; - s6gmac_set_rgmii_txclock(pd); - } - pd->link.isup = isup; - if (isup) - netif_carrier_on(dev); - phy_print_status(phydev); -} - -static void s6gmac_adjust_link(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct phy_device *phydev = pd->phydev; - if (pd->link.isup && - (!phydev->link || - (pd->link.mbit != phydev->speed) || - (pd->link.full != phydev->duplex))) { - pd->link.isup = 0; - netif_tx_disable(dev); - if (!phydev->link) { - netif_carrier_off(dev); - phy_print_status(phydev); - } - } - if (!pd->link.isup && phydev->link) { - if (pd->link.full != phydev->duplex) { - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - if (phydev->duplex) - maccfg |= 1 << S6_GMAC_MACCONF2_FULL; - else - maccfg &= ~(1 << S6_GMAC_MACCONF2_FULL); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (pd->link.giga != (phydev->speed == 1000)) { - u32 fifocfg = readl(pd->reg + S6_GMAC_FIFOCONF5); - u32 maccfg = readl(pd->reg + S6_GMAC_MACCONF2); - maccfg &= ~(S6_GMAC_MACCONF2_IFMODE_MASK - << S6_GMAC_MACCONF2_IFMODE); - if (phydev->speed == 1000) { - fifocfg |= 1 << S6_GMAC_FIFOCONF5_CFGBYTM; - maccfg |= S6_GMAC_MACCONF2_IFMODE_BYTE - << S6_GMAC_MACCONF2_IFMODE; - } else { - fifocfg &= ~(1 << S6_GMAC_FIFOCONF5_CFGBYTM); - maccfg |= S6_GMAC_MACCONF2_IFMODE_NIBBLE - << S6_GMAC_MACCONF2_IFMODE; - } - writel(fifocfg, pd->reg + S6_GMAC_FIFOCONF5); - writel(maccfg, pd->reg + S6_GMAC_MACCONF2); - } - - if (!s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_wake_queue(dev); - s6gmac_linkisup(dev, 1); - } -} - -static inline int s6gmac_phy_start(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - int i = 0; - struct phy_device *p = NULL; - while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i]))) - i++; - p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, - PHY_INTERFACE_MODE_RGMII); - if (IS_ERR(p)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(p); - } - p->supported &= PHY_GBIT_FEATURES; - p->advertising = p->supported; - pd->phydev = p; - return 0; -} - -static inline void s6gmac_init_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - u32 mask; - mask = 1 << S6_GMAC_STATCARRY1_RDRP | - 1 << S6_GMAC_STATCARRY1_RJBR | - 1 << S6_GMAC_STATCARRY1_RFRG | - 1 << S6_GMAC_STATCARRY1_ROVR | - 1 << S6_GMAC_STATCARRY1_RUND | - 1 << S6_GMAC_STATCARRY1_RCDE | - 1 << S6_GMAC_STATCARRY1_RFLR | - 1 << S6_GMAC_STATCARRY1_RALN | - 1 << S6_GMAC_STATCARRY1_RMCA | - 1 << S6_GMAC_STATCARRY1_RFCS | - 1 << S6_GMAC_STATCARRY1_RPKT | - 1 << S6_GMAC_STATCARRY1_RBYT; - writel(mask, pd->reg + S6_GMAC_STATCARRY(0)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(0)); - mask = 1 << S6_GMAC_STATCARRY2_TDRP | - 1 << S6_GMAC_STATCARRY2_TNCL | - 1 << S6_GMAC_STATCARRY2_TXCL | - 1 << S6_GMAC_STATCARRY2_TEDF | - 1 << S6_GMAC_STATCARRY2_TPKT | - 1 << S6_GMAC_STATCARRY2_TBYT | - 1 << S6_GMAC_STATCARRY2_TFRG | - 1 << S6_GMAC_STATCARRY2_TUND | - 1 << S6_GMAC_STATCARRY2_TOVR | - 1 << S6_GMAC_STATCARRY2_TFCS | - 1 << S6_GMAC_STATCARRY2_TJBR; - writel(mask, pd->reg + S6_GMAC_STATCARRY(1)); - writel(~mask, pd->reg + S6_GMAC_STATCARRYMSK(1)); -} - -static inline void s6gmac_init_dmac(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - s6dmac_disable_chan(pd->tx_dma, pd->tx_chan); - s6dmac_disable_chan(pd->rx_dma, pd->rx_chan); - s6dmac_disable_error_irqs(pd->tx_dma, 1 << S6_HIFDMA_GMACTX); - s6dmac_disable_error_irqs(pd->rx_dma, 1 << S6_HIFDMA_GMACRX); -} - -static int s6gmac_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&pd->lock, flags); - writel(skb->len << S6_GMAC_BURST_PREWR_LEN | - 0 << S6_GMAC_BURST_PREWR_CFE | - 1 << S6_GMAC_BURST_PREWR_PPE | - 1 << S6_GMAC_BURST_PREWR_FCS | - ((skb->len < ETH_ZLEN) ? 1 : 0) << S6_GMAC_BURST_PREWR_PAD, - pd->reg + S6_GMAC_BURST_PREWR); - s6dmac_put_fifo_cache(pd->tx_dma, pd->tx_chan, - (u32)skb->data, pd->io, skb->len); - if (s6dmac_fifo_full(pd->tx_dma, pd->tx_chan)) - netif_stop_queue(dev); - if (((u8)(pd->tx_skb_i - pd->tx_skb_o)) >= S6_NUM_TX_SKB) { - printk(KERN_ERR "GMAC BUG: skb tx ring overflow [%x, %x]\n", - pd->tx_skb_o, pd->tx_skb_i); - BUG(); - } - pd->tx_skb[(pd->tx_skb_i++) % S6_NUM_TX_SKB] = skb; - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static void s6gmac_tx_timeout(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - s6gmac_tx_interrupt(dev); - spin_unlock_irqrestore(&pd->lock, flags); -} - -static int s6gmac_open(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - phy_read_status(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - pd->link.mbit = 0; - s6gmac_linkisup(dev, pd->phydev->link); - s6gmac_init_device(dev); - s6gmac_init_stats(dev); - s6gmac_init_dmac(dev); - s6gmac_rx_fillfifo(dev); - s6dmac_enable_chan(pd->rx_dma, pd->rx_chan, - 2, 1, 0, 1, 0, 0, 0, 7, -1, 2, 0, 1); - s6dmac_enable_chan(pd->tx_dma, pd->tx_chan, - 2, 0, 1, 0, 0, 0, 0, 7, -1, 2, 0, 1); - writel(0 << S6_GMAC_HOST_INT_TXBURSTOVER | - 0 << S6_GMAC_HOST_INT_TXPREWOVER | - 0 << S6_GMAC_HOST_INT_RXBURSTUNDER | - 0 << S6_GMAC_HOST_INT_RXPOSTRFULL | - 0 << S6_GMAC_HOST_INT_RXPOSTRUNDER, - pd->reg + S6_GMAC_HOST_INTMASK); - spin_unlock_irqrestore(&pd->lock, flags); - phy_start(pd->phydev); - netif_start_queue(dev); - return 0; -} - -static int s6gmac_stop(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - unsigned long flags; - netif_stop_queue(dev); - phy_stop(pd->phydev); - spin_lock_irqsave(&pd->lock, flags); - s6gmac_init_dmac(dev); - s6gmac_stop_device(dev); - while (pd->tx_skb_i != pd->tx_skb_o) - dev_kfree_skb(pd->tx_skb[(pd->tx_skb_o++) % S6_NUM_TX_SKB]); - while (pd->rx_skb_i != pd->rx_skb_o) - dev_kfree_skb(pd->rx_skb[(pd->rx_skb_o++) % S6_NUM_RX_SKB]); - spin_unlock_irqrestore(&pd->lock, flags); - return 0; -} - -static struct net_device_stats *s6gmac_stats(struct net_device *dev) -{ - struct s6gmac *pd = netdev_priv(dev); - struct net_device_stats *st = (struct net_device_stats *)&pd->stats; - int i; - do { - unsigned long flags; - spin_lock_irqsave(&pd->lock, flags); - for (i = 0; i < ARRAY_SIZE(pd->stats); i++) - pd->stats[i] = - pd->carry[i] << (S6_GMAC_STAT_SIZE_MIN - 1); - s6gmac_stats_collect(pd, &statinf[0][0]); - s6gmac_stats_collect(pd, &statinf[1][0]); - i = s6gmac_stats_pending(pd, 0) | - s6gmac_stats_pending(pd, 1); - spin_unlock_irqrestore(&pd->lock, flags); - } while (i); - st->rx_errors = st->rx_crc_errors + - st->rx_frame_errors + - st->rx_length_errors + - st->rx_missed_errors; - st->tx_errors += st->tx_aborted_errors; - return st; -} - -static int s6gmac_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct s6gmac *pd; - int res; - unsigned long i; - struct mii_bus *mb; - - dev = alloc_etherdev(sizeof(*pd)); - if (!dev) - return -ENOMEM; - - dev->open = s6gmac_open; - dev->stop = s6gmac_stop; - dev->hard_start_xmit = s6gmac_tx; - dev->tx_timeout = s6gmac_tx_timeout; - dev->watchdog_timeo = HZ; - dev->get_stats = s6gmac_stats; - dev->irq = platform_get_irq(pdev, 0); - pd = netdev_priv(dev); - memset(pd, 0, sizeof(*pd)); - spin_lock_init(&pd->lock); - pd->reg = platform_get_resource(pdev, IORESOURCE_MEM, 0)->start; - i = platform_get_resource(pdev, IORESOURCE_DMA, 0)->start; - pd->tx_dma = DMA_MASK_DMAC(i); - pd->tx_chan = DMA_INDEX_CHNL(i); - i = platform_get_resource(pdev, IORESOURCE_DMA, 1)->start; - pd->rx_dma = DMA_MASK_DMAC(i); - pd->rx_chan = DMA_INDEX_CHNL(i); - pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start; - res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev); - if (res) { - printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq); - goto errirq; - } - res = register_netdev(dev); - if (res) { - printk(KERN_ERR DRV_PRMT "error registering device %s\n", - dev->name); - goto errdev; - } - mb = mdiobus_alloc(); - if (!mb) { - printk(KERN_ERR DRV_PRMT "error allocating mii bus\n"); - res = -ENOMEM; - goto errmii; - } - mb->name = "s6gmac_mii"; - mb->read = s6mii_read; - mb->write = s6mii_write; - mb->reset = s6mii_reset; - mb->priv = pd; - snprintf(mb->id, MII_BUS_ID_SIZE, "%s-%x", pdev->name, pdev->id); - mb->phy_mask = ~(1 << 0); - mb->irq = &pd->mii.irq[0]; - for (i = 0; i < PHY_MAX_ADDR; i++) { - int n = platform_get_irq(pdev, i + 1); - if (n < 0) - n = PHY_POLL; - pd->mii.irq[i] = n; - } - mdiobus_register(mb); - pd->mii.bus = mb; - res = s6gmac_phy_start(dev); - if (res) - return res; - platform_set_drvdata(pdev, dev); - return 0; -errmii: - unregister_netdev(dev); -errdev: - free_irq(dev->irq, dev); -errirq: - free_netdev(dev); - return res; -} - -static int s6gmac_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - if (dev) { - struct s6gmac *pd = netdev_priv(dev); - mdiobus_unregister(pd->mii.bus); - unregister_netdev(dev); - free_irq(dev->irq, dev); - free_netdev(dev); - } - return 0; -} - -static struct platform_driver s6gmac_driver = { - .probe = s6gmac_probe, - .remove = s6gmac_remove, - .driver = { - .name = "s6gmac", - }, -}; - -module_platform_driver(s6gmac_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("S6105 on chip Ethernet driver"); -MODULE_AUTHOR("Oskar Schirmer "); -- cgit v1.2.3-70-g09d2 From f620e4fe161f4d488414d7893a690e76b53f0c5e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 21 Dec 2014 22:14:31 +0100 Subject: net: ethernet: stmicro: stmmac: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 4032b170fe2..3039de2465b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -430,7 +430,6 @@ static struct platform_driver stmmac_pltfr_driver = { .remove = stmmac_pltfr_remove, .driver = { .name = STMMAC_RESOURCE_NAME, - .owner = THIS_MODULE, .pm = &stmmac_pltfr_pm_ops, .of_match_table = of_match_ptr(stmmac_dt_ids), }, -- cgit v1.2.3-70-g09d2 From 6402a577f4688053e98c1ffda1f4a6a59684ba81 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:28:52 +0800 Subject: 8139too: Fix the lack of pci_disable_device For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index 6d0b9dfac31..d4b0a29c6aa 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -787,10 +787,10 @@ static struct net_device *rtl8139_init_board(struct pci_dev *pdev) if (rc) goto err_out; + disable_dev_on_err = 1; rc = pci_request_regions (pdev, DRV_NAME); if (rc) goto err_out; - disable_dev_on_err = 1; pci_set_master (pdev); -- cgit v1.2.3-70-g09d2 From ea3c9e13afe739f1ff31130cea57084cfe8c5dcd Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 22 Dec 2014 08:43:14 +0800 Subject: 8139too: Add netif_napi_del in the driver For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139too.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index d4b0a29c6aa..78bb4ceb1cd 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -1110,6 +1110,7 @@ static int rtl8139_init_one(struct pci_dev *pdev, return 0; err_out: + netif_napi_del(&tp->napi); __rtl8139_cleanup_dev (dev); pci_disable_device (pdev); return i; @@ -1124,6 +1125,7 @@ static void rtl8139_remove_one(struct pci_dev *pdev) assert (dev != NULL); cancel_delayed_work_sync(&tp->thread); + netif_napi_del(&tp->napi); unregister_netdev (dev); -- cgit v1.2.3-70-g09d2 From 492f5add4be84652bbe13da8a250d60c6856a5c5 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 22 Dec 2014 10:21:57 +0200 Subject: net/mlx4_en: Doorbell is byteswapped in Little Endian archs iowrite32() will byteswap it's argument on big endian archs. iowrite32be() will byteswap on little endian archs. Since we don't want to do this unnecessary byteswap on the fast path, doorbell is stored in the NIC's native endianness. Using the right iowrite() according to the arch endianness. CC: Wei Yang CC: David Laight Fixes: 6a4e812 ("net/mlx4_en: Avoid calling bswap in tx fast path") Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index a308d41e4de..e3357bf523d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -962,7 +962,17 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) tx_desc->ctrl.owner_opcode = op_own; if (send_doorbell) { wmb(); - iowrite32(ring->doorbell_qpn, + /* Since there is no iowrite*_native() that writes the + * value as is, without byteswapping - using the one + * the doesn't do byteswapping in the relevant arch + * endianness. + */ +#if defined(__LITTLE_ENDIAN) + iowrite32( +#else + iowrite32be( +#endif + ring->doorbell_qpn, ring->bf.uar->map + MLX4_SEND_DOORBELL); } else { ring->xmit_more++; -- cgit v1.2.3-70-g09d2 From 3079c652141f9d6377417a7e8fd650c9948df65e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 22 Dec 2014 20:35:25 +1100 Subject: caif: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks caif. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers caif tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in caif. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/caif/caif_virtio.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c index a5fefb9059c..b306210b02b 100644 --- a/drivers/net/caif/caif_virtio.c +++ b/drivers/net/caif/caif_virtio.c @@ -257,7 +257,6 @@ static int cfv_rx_poll(struct napi_struct *napi, int quota) struct vringh_kiov *riov = &cfv->ctx.riov; unsigned int skb_len; -again: do { skb = NULL; @@ -322,7 +321,6 @@ exit: napi_schedule_prep(napi)) { vringh_notify_disable_kern(cfv->vr_rx); __napi_schedule(napi); - goto again; } break; -- cgit v1.2.3-70-g09d2 From 5ad24def21b205a8e91925cd276b0a794b5ace82 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Mon, 22 Dec 2014 15:14:37 +0530 Subject: cxgb4vf: Fix ethtool get_settings for VF driver Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4vf/adapter.h | 4 + .../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 142 ++++++++++++++++++--- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 2 +- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 54 ++++---- 4 files changed, 161 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h index d00a751f058..6049f70e110 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h @@ -96,6 +96,9 @@ struct port_info { s16 xact_addr_filt; /* index of our MAC address filter */ u16 rss_size; /* size of VI's RSS table slice */ u8 pidx; /* index into adapter port[] */ + s8 mdio_addr; + u8 port_type; /* firmware port type */ + u8 mod_type; /* firmware module type */ u8 port_id; /* physical port ID */ u8 nqsets; /* # of "Queue Sets" */ u8 first_qset; /* index of first "Queue Set" */ @@ -522,6 +525,7 @@ static inline struct adapter *netdev2adap(const struct net_device *dev) * is "contracted" to provide for the common code. */ void t4vf_os_link_changed(struct adapter *, int, int); +void t4vf_os_portmod_changed(struct adapter *, int); /* * SGE function prototype declarations. diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c index aa74ec34a46..2215d432a05 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "t4vf_common.h" #include "t4vf_defs.h" @@ -209,6 +210,38 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) } } +/* + * THe port module type has changed on the indicated "port" (Virtual + * Interface). + */ +void t4vf_os_portmod_changed(struct adapter *adapter, int pidx) +{ + static const char * const mod_str[] = { + NULL, "LR", "SR", "ER", "passive DA", "active DA", "LRM" + }; + const struct net_device *dev = adapter->port[pidx]; + const struct port_info *pi = netdev_priv(dev); + + if (pi->mod_type == FW_PORT_MOD_TYPE_NONE) + dev_info(adapter->pdev_dev, "%s: port module unplugged\n", + dev->name); + else if (pi->mod_type < ARRAY_SIZE(mod_str)) + dev_info(adapter->pdev_dev, "%s: %s port module inserted\n", + dev->name, mod_str[pi->mod_type]); + else if (pi->mod_type == FW_PORT_MOD_TYPE_NOTSUPPORTED) + dev_info(adapter->pdev_dev, "%s: unsupported optical port " + "module inserted\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_UNKNOWN) + dev_info(adapter->pdev_dev, "%s: unknown port module inserted," + "forcing TWINAX\n", dev->name); + else if (pi->mod_type == FW_PORT_MOD_TYPE_ERROR) + dev_info(adapter->pdev_dev, "%s: transceiver module error\n", + dev->name); + else + dev_info(adapter->pdev_dev, "%s: unknown module type %d " + "inserted\n", dev->name, pi->mod_type); +} + /* * Net device operations. * ====================== @@ -1193,24 +1226,103 @@ static void cxgb4vf_poll_controller(struct net_device *dev) * state of the port to which we're linked. */ -/* - * Return current port link settings. - */ -static int cxgb4vf_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - const struct port_info *pi = netdev_priv(dev); +static unsigned int t4vf_from_fw_linkcaps(enum fw_port_type type, + unsigned int caps) +{ + unsigned int v = 0; + + if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XFI || + type == FW_PORT_TYPE_BT_XAUI) { + v |= SUPPORTED_TP; + if (caps & FW_PORT_CAP_SPEED_100M) + v |= SUPPORTED_100baseT_Full; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) { + v |= SUPPORTED_Backplane; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseKX_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseKX4_Full; + } else if (type == FW_PORT_TYPE_KR) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full; + else if (type == FW_PORT_TYPE_BP_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full; + else if (type == FW_PORT_TYPE_BP4_AP) + v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC | + SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full | + SUPPORTED_10000baseKX4_Full; + else if (type == FW_PORT_TYPE_FIBER_XFI || + type == FW_PORT_TYPE_FIBER_XAUI || + type == FW_PORT_TYPE_SFP || + type == FW_PORT_TYPE_QSFP_10G || + type == FW_PORT_TYPE_QSA) { + v |= SUPPORTED_FIBRE; + if (caps & FW_PORT_CAP_SPEED_1G) + v |= SUPPORTED_1000baseT_Full; + if (caps & FW_PORT_CAP_SPEED_10G) + v |= SUPPORTED_10000baseT_Full; + } else if (type == FW_PORT_TYPE_BP40_BA || + type == FW_PORT_TYPE_QSFP) { + v |= SUPPORTED_40000baseSR4_Full; + v |= SUPPORTED_FIBRE; + } + + if (caps & FW_PORT_CAP_ANEG) + v |= SUPPORTED_Autoneg; + return v; +} + +static int cxgb4vf_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + const struct port_info *p = netdev_priv(dev); + + if (p->port_type == FW_PORT_TYPE_BT_SGMII || + p->port_type == FW_PORT_TYPE_BT_XFI || + p->port_type == FW_PORT_TYPE_BT_XAUI) + cmd->port = PORT_TP; + else if (p->port_type == FW_PORT_TYPE_FIBER_XFI || + p->port_type == FW_PORT_TYPE_FIBER_XAUI) + cmd->port = PORT_FIBRE; + else if (p->port_type == FW_PORT_TYPE_SFP || + p->port_type == FW_PORT_TYPE_QSFP_10G || + p->port_type == FW_PORT_TYPE_QSA || + p->port_type == FW_PORT_TYPE_QSFP) { + if (p->mod_type == FW_PORT_MOD_TYPE_LR || + p->mod_type == FW_PORT_MOD_TYPE_SR || + p->mod_type == FW_PORT_MOD_TYPE_ER || + p->mod_type == FW_PORT_MOD_TYPE_LRM) + cmd->port = PORT_FIBRE; + else if (p->mod_type == FW_PORT_MOD_TYPE_TWINAX_PASSIVE || + p->mod_type == FW_PORT_MOD_TYPE_TWINAX_ACTIVE) + cmd->port = PORT_DA; + else + cmd->port = PORT_OTHER; + } else + cmd->port = PORT_OTHER; - cmd->supported = pi->link_cfg.supported; - cmd->advertising = pi->link_cfg.advertising; + if (p->mdio_addr >= 0) { + cmd->phy_address = p->mdio_addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ? + MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45; + } else { + cmd->phy_address = 0; /* not really, but no better option */ + cmd->transceiver = XCVR_INTERNAL; + cmd->mdio_support = 0; + } + + cmd->supported = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.supported); + cmd->advertising = t4vf_from_fw_linkcaps(p->port_type, + p->link_cfg.advertising); ethtool_cmd_speed_set(cmd, - netif_carrier_ok(dev) ? pi->link_cfg.speed : -1); + netif_carrier_ok(dev) ? p->link_cfg.speed : 0); cmd->duplex = DUPLEX_FULL; - - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = pi->port_id; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = pi->link_cfg.autoneg; + cmd->autoneg = p->link_cfg.autoneg; cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; return 0; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8d3237f5e36..b9debb4f29a 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -230,7 +230,7 @@ struct adapter_params { static inline bool is_10g_port(const struct link_config *lc) { - return (lc->supported & SUPPORTED_10000baseT_Full) != 0; + return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } static inline bool is_x_10g_port(const struct link_config *lc) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 02e8833b779..21dc9a20308 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -245,6 +245,10 @@ static int hash_mac_addr(const u8 *addr) return a & 0x3f; } +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + /** * init_link_config - initialize a link's SW state * @lc: structure holding the link state @@ -259,8 +263,8 @@ static void init_link_config(struct link_config *lc, unsigned int caps) lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; - if (lc->supported & SUPPORTED_Autoneg) { - lc->advertising = lc->supported; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; lc->autoneg = AUTONEG_ENABLE; lc->requested_fc |= PAUSE_AUTONEG; } else { @@ -280,7 +284,6 @@ int t4vf_port_init(struct adapter *adapter, int pidx) struct fw_vi_cmd vi_cmd, vi_rpl; struct fw_port_cmd port_cmd, port_rpl; int v; - u32 word; /* * Execute a VI Read command to get our Virtual Interface information @@ -319,19 +322,11 @@ int t4vf_port_init(struct adapter *adapter, int pidx) if (v) return v; - v = 0; - word = be16_to_cpu(port_rpl.u.info.pcap); - if (word & FW_PORT_CAP_SPEED_100M) - v |= SUPPORTED_100baseT_Full; - if (word & FW_PORT_CAP_SPEED_1G) - v |= SUPPORTED_1000baseT_Full; - if (word & FW_PORT_CAP_SPEED_10G) - v |= SUPPORTED_10000baseT_Full; - if (word & FW_PORT_CAP_SPEED_40G) - v |= SUPPORTED_40000baseSR4_Full; - if (word & FW_PORT_CAP_ANEG) - v |= SUPPORTED_Autoneg; - init_link_config(&pi->link_cfg, v); + v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype); + pi->port_type = FW_PORT_CMD_PTYPE_G(v); + pi->mod_type = FW_PORT_MOD_TYPE_NA; + + init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap)); return 0; } @@ -1491,7 +1486,7 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) */ const struct fw_port_cmd *port_cmd = (const struct fw_port_cmd *)rpl; - u32 word; + u32 stat, mod; int action, port_id, link_ok, speed, fc, pidx; /* @@ -1509,21 +1504,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) port_id = FW_PORT_CMD_PORTID_G( be32_to_cpu(port_cmd->op_to_portid)); - word = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); - link_ok = (word & FW_PORT_CMD_LSTATUS_F) != 0; + stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype); + link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0; speed = 0; fc = 0; - if (word & FW_PORT_CMD_RXPAUSE_F) + if (stat & FW_PORT_CMD_RXPAUSE_F) fc |= PAUSE_RX; - if (word & FW_PORT_CMD_TXPAUSE_F) + if (stat & FW_PORT_CMD_TXPAUSE_F) fc |= PAUSE_TX; - if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) + if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M)) speed = 100; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G)) speed = 1000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; - else if (word & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; /* @@ -1540,12 +1535,21 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) continue; lc = &pi->link_cfg; + + mod = FW_PORT_CMD_MODTYPE_G(stat); + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4vf_os_portmod_changed(adapter, pidx); + } + if (link_ok != lc->link_ok || speed != lc->speed || fc != lc->fc) { /* something changed */ lc->link_ok = link_ok; lc->speed = speed; lc->fc = fc; + lc->supported = + be16_to_cpu(port_cmd->u.info.pcap); t4vf_os_link_changed(adapter, pidx, link_ok); } } -- cgit v1.2.3-70-g09d2 From 7d0b93499f4879ddbc75d594f4ea216ba964f78e Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Mon, 22 Dec 2014 15:18:05 +0800 Subject: ACPI / video: Add some Samsung models to disable_native_backlight list Several Samsung laptop models (SAMSUNG 870Z5E/880Z5E/680Z5E and SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V) do not have a working native backlight control interface so restore their acpi_videoX interface. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84221 Link: https://bugzilla.kernel.org/show_bug.cgi?id=84651 For SAMSUNG 870Z5E/880Z5E/680Z5E: Reported-and-tested-by: Brent Saner Reported-by: Vitaliy Filippov Reported-by: Laszlo KREKACS For SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V: Reported-by: Vladimir Perepechin Cc: 3.17+ # 3.17+ Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 1eaadff2e19..c72e79d2c5a 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -505,6 +505,23 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"), }, }, + + { + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"), + }, + }, + { + .callback = video_disable_native_backlight, + .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"), + }, + }, {} }; -- cgit v1.2.3-70-g09d2 From 47c93e6b3f37bf2b709fb107f3db586e39b8fd56 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 9 Dec 2014 16:47:17 -0800 Subject: thermal: int340x: Introduce processor reporting device The Int340x thermal provides a processor thermal device, which is used to control processor thermal states. These devices are either reported as a PCI device or an ACPI device. This device provides power limits, control states and optional temperature. This change implements minimal requirements to expose processor power limits which can be used during thermal power limiting. Power limits are exposed via an attribute group called "power_limits" under the device. The exported attributes are: power_limit_0_max_uw power_limit_1_max_uw power_limit_0_min_uw power_limit_1_min_uw power_limit_0_tmin_us power_limit_1_tmin_us power_limit_0_tmax_us power_limit_1_tmax_us power_limit_0_step_uw power_limit_1_step_uw Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/Makefile | 1 + .../int340x_thermal/processor_thermal_device.c | 298 +++++++++++++++++++++ 2 files changed, 299 insertions(+) create mode 100644 drivers/thermal/int340x_thermal/processor_thermal_device.c (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/Makefile b/drivers/thermal/int340x_thermal/Makefile index ffe40bffaf1..d4413698a85 100644 --- a/drivers/thermal/int340x_thermal/Makefile +++ b/drivers/thermal/int340x_thermal/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += processor_thermal_device.o obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c new file mode 100644 index 00000000000..f83c55b09e5 --- /dev/null +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -0,0 +1,298 @@ +/* + * processor_thermal_device.c + * Copyright (c) 2014, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ +#include +#include +#include +#include +#include +#include + +/* Broadwell-U/HSB thermal reporting device */ +#define PCI_DEVICE_ID_PROC_BDW_THERMAL 0x1603 +#define PCI_DEVICE_ID_PROC_HSB_THERMAL 0x0A03 + +/* Braswell thermal reporting device */ +#define PCI_DEVICE_ID_PROC_BSW_THERMAL 0x22DC + +struct power_config { + u32 index; + u32 min_uw; + u32 max_uw; + u32 tmin_us; + u32 tmax_us; + u32 step_uw; +}; + +struct proc_thermal_device { + struct device *dev; + struct acpi_device *adev; + struct power_config power_limits[2]; +}; + +enum proc_thermal_emum_mode_type { + PROC_THERMAL_NONE, + PROC_THERMAL_PCI, + PROC_THERMAL_PLATFORM_DEV +}; + +/* + * We can have only one type of enumeration, PCI or Platform, + * not both. So we don't need instance specific data. + */ +static enum proc_thermal_emum_mode_type proc_thermal_emum_mode = + PROC_THERMAL_NONE; + +#define POWER_LIMIT_SHOW(index, suffix) \ +static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct pci_dev *pci_dev; \ + struct platform_device *pdev; \ + struct proc_thermal_device *proc_dev; \ +\ + if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \ + pdev = to_platform_device(dev); \ + proc_dev = platform_get_drvdata(pdev); \ + } else { \ + pci_dev = to_pci_dev(dev); \ + proc_dev = pci_get_drvdata(pci_dev); \ + } \ + return sprintf(buf, "%lu\n",\ + (unsigned long)proc_dev->power_limits[index].suffix * 1000); \ +} + +POWER_LIMIT_SHOW(0, min_uw) +POWER_LIMIT_SHOW(0, max_uw) +POWER_LIMIT_SHOW(0, step_uw) +POWER_LIMIT_SHOW(0, tmin_us) +POWER_LIMIT_SHOW(0, tmax_us) + +POWER_LIMIT_SHOW(1, min_uw) +POWER_LIMIT_SHOW(1, max_uw) +POWER_LIMIT_SHOW(1, step_uw) +POWER_LIMIT_SHOW(1, tmin_us) +POWER_LIMIT_SHOW(1, tmax_us) + +static DEVICE_ATTR_RO(power_limit_0_min_uw); +static DEVICE_ATTR_RO(power_limit_0_max_uw); +static DEVICE_ATTR_RO(power_limit_0_step_uw); +static DEVICE_ATTR_RO(power_limit_0_tmin_us); +static DEVICE_ATTR_RO(power_limit_0_tmax_us); + +static DEVICE_ATTR_RO(power_limit_1_min_uw); +static DEVICE_ATTR_RO(power_limit_1_max_uw); +static DEVICE_ATTR_RO(power_limit_1_step_uw); +static DEVICE_ATTR_RO(power_limit_1_tmin_us); +static DEVICE_ATTR_RO(power_limit_1_tmax_us); + +static struct attribute *power_limit_attrs[] = { + &dev_attr_power_limit_0_min_uw.attr, + &dev_attr_power_limit_1_min_uw.attr, + &dev_attr_power_limit_0_max_uw.attr, + &dev_attr_power_limit_1_max_uw.attr, + &dev_attr_power_limit_0_step_uw.attr, + &dev_attr_power_limit_1_step_uw.attr, + &dev_attr_power_limit_0_tmin_us.attr, + &dev_attr_power_limit_1_tmin_us.attr, + &dev_attr_power_limit_0_tmax_us.attr, + &dev_attr_power_limit_1_tmax_us.attr, + NULL +}; + +static struct attribute_group power_limit_attribute_group = { + .attrs = power_limit_attrs, + .name = "power_limits" +}; + +static int proc_thermal_add(struct device *dev, + struct proc_thermal_device **priv) +{ + struct proc_thermal_device *proc_priv; + struct acpi_device *adev; + acpi_status status; + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *elements, *ppcc; + union acpi_object *p; + int i; + + adev = ACPI_COMPANION(dev); + + status = acpi_evaluate_object(adev->handle, "PPCC", NULL, &buf); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buf.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + dev_err(dev, "Invalid PPCC data\n"); + return -EFAULT; + } + if (!p->package.count) { + dev_err(dev, "Invalid PPCC package size\n"); + return -EFAULT; + } + + proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL); + if (!proc_priv) + return -ENOMEM; + + proc_priv->dev = dev; + proc_priv->adev = adev; + + for (i = 0; i < min((int)p->package.count - 1, 2); ++i) { + elements = &(p->package.elements[i+1]); + if (elements->type != ACPI_TYPE_PACKAGE || + elements->package.count != 6) + return -EFAULT; + + ppcc = elements->package.elements; + proc_priv->power_limits[i].index = ppcc[0].integer.value; + proc_priv->power_limits[i].min_uw = ppcc[1].integer.value; + proc_priv->power_limits[i].max_uw = ppcc[2].integer.value; + proc_priv->power_limits[i].tmin_us = ppcc[3].integer.value; + proc_priv->power_limits[i].tmax_us = ppcc[4].integer.value; + proc_priv->power_limits[i].step_uw = ppcc[5].integer.value; + } + + *priv = proc_priv; + + return sysfs_create_group(&dev->kobj, + &power_limit_attribute_group); +} + +void proc_thermal_remove(struct proc_thermal_device *proc_priv) +{ + sysfs_remove_group(&proc_priv->dev->kobj, + &power_limit_attribute_group); +} + +static int int3401_add(struct platform_device *pdev) +{ + struct proc_thermal_device *proc_priv; + int ret; + + if (proc_thermal_emum_mode == PROC_THERMAL_PCI) { + dev_err(&pdev->dev, "error: enumerated as PCI dev\n"); + return -ENODEV; + } + + ret = proc_thermal_add(&pdev->dev, &proc_priv); + if (ret) + return ret; + + platform_set_drvdata(pdev, proc_priv); + proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV; + + return 0; +} + +static int int3401_remove(struct platform_device *pdev) +{ + proc_thermal_remove(platform_get_drvdata(pdev)); + + return 0; +} + +static int proc_thermal_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *unused) +{ + struct proc_thermal_device *proc_priv; + int ret; + + if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { + dev_err(&pdev->dev, "error: enumerated as platform dev\n"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret < 0) { + dev_err(&pdev->dev, "error: could not enable device\n"); + return ret; + } + + ret = proc_thermal_add(&pdev->dev, &proc_priv); + if (ret) { + pci_disable_device(pdev); + return ret; + } + + pci_set_drvdata(pdev, proc_priv); + proc_thermal_emum_mode = PROC_THERMAL_PCI; + + return 0; +} + +static void proc_thermal_pci_remove(struct pci_dev *pdev) +{ + proc_thermal_remove(pci_get_drvdata(pdev)); + pci_disable_device(pdev); +} + +static const struct pci_device_id proc_thermal_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BDW_THERMAL)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_HSB_THERMAL)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BSW_THERMAL)}, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, proc_thermal_pci_ids); + +static struct pci_driver proc_thermal_pci_driver = { + .name = "proc_thermal", + .probe = proc_thermal_pci_probe, + .remove = proc_thermal_pci_remove, + .id_table = proc_thermal_pci_ids, +}; + +static const struct acpi_device_id int3401_device_ids[] = { + {"INT3401", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, int3401_device_ids); + +static struct platform_driver int3401_driver = { + .probe = int3401_add, + .remove = int3401_remove, + .driver = { + .name = "int3401 thermal", + .acpi_match_table = int3401_device_ids, + }, +}; + +static int __init proc_thermal_init(void) +{ + int ret; + + ret = platform_driver_register(&int3401_driver); + if (ret) + return ret; + + ret = pci_register_driver(&proc_thermal_pci_driver); + + return ret; +} + +static void __exit proc_thermal_exit(void) +{ + platform_driver_unregister(&int3401_driver); + pci_unregister_driver(&proc_thermal_pci_driver); +} + +module_init(proc_thermal_init); +module_exit(proc_thermal_exit); + +MODULE_AUTHOR("Srinivas Pandruvada "); +MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-70-g09d2 From f01bc8f37ec940caae8bf8b6e7169f7cc2b6877a Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 23 Dec 2014 15:23:34 -0800 Subject: Thermal/int340x/int3403: Fix memory leak Address memory leak for buffer allocated with ACPI_ALLOCATE_BUFFER. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/int3403_thermal.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c index 1bfa6a69e77..479d754c3f5 100644 --- a/drivers/thermal/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -369,6 +369,7 @@ static int int3403_cdev_add(struct int3403_priv *priv) p = buf.pointer; if (!p || (p->type != ACPI_TYPE_PACKAGE)) { printk(KERN_WARNING "Invalid PPSS data\n"); + kfree(buf.pointer); return -EFAULT; } @@ -381,6 +382,7 @@ static int int3403_cdev_add(struct int3403_priv *priv) priv->priv = obj; + kfree(buf.pointer); /* TODO: add ACPI notification support */ return result; -- cgit v1.2.3-70-g09d2 From cc3f71a41576ba014ba3b80d5d68b7faa90bfeef Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 23 Dec 2014 15:23:35 -0800 Subject: Thermal/int340x/processor_thermal: Fix memory leak Address memory leak for buffer allocated with ACPI_ALLOCATE_BUFFER. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- .../int340x_thermal/processor_thermal_device.c | 29 +++++++++++++++------- 1 file changed, 20 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c index f83c55b09e5..31bb553aac2 100644 --- a/drivers/thermal/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c @@ -127,6 +127,7 @@ static int proc_thermal_add(struct device *dev, union acpi_object *elements, *ppcc; union acpi_object *p; int i; + int ret; adev = ACPI_COMPANION(dev); @@ -137,16 +138,20 @@ static int proc_thermal_add(struct device *dev, p = buf.pointer; if (!p || (p->type != ACPI_TYPE_PACKAGE)) { dev_err(dev, "Invalid PPCC data\n"); - return -EFAULT; + ret = -EFAULT; + goto free_buffer; } if (!p->package.count) { dev_err(dev, "Invalid PPCC package size\n"); - return -EFAULT; + ret = -EFAULT; + goto free_buffer; } proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL); - if (!proc_priv) - return -ENOMEM; + if (!proc_priv) { + ret = -ENOMEM; + goto free_buffer; + } proc_priv->dev = dev; proc_priv->adev = adev; @@ -154,9 +159,10 @@ static int proc_thermal_add(struct device *dev, for (i = 0; i < min((int)p->package.count - 1, 2); ++i) { elements = &(p->package.elements[i+1]); if (elements->type != ACPI_TYPE_PACKAGE || - elements->package.count != 6) - return -EFAULT; - + elements->package.count != 6) { + ret = -EFAULT; + goto free_buffer; + } ppcc = elements->package.elements; proc_priv->power_limits[i].index = ppcc[0].integer.value; proc_priv->power_limits[i].min_uw = ppcc[1].integer.value; @@ -168,8 +174,13 @@ static int proc_thermal_add(struct device *dev, *priv = proc_priv; - return sysfs_create_group(&dev->kobj, - &power_limit_attribute_group); + ret = sysfs_create_group(&dev->kobj, + &power_limit_attribute_group); + +free_buffer: + kfree(buf.pointer); + + return ret; } void proc_thermal_remove(struct proc_thermal_device *proc_priv) -- cgit v1.2.3-70-g09d2 From f8061d383b09ed933a49ac3fd301c2f991261851 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 23 Dec 2014 15:23:36 -0800 Subject: Thermal/int340x/int3403: Free acpi notification handler Remove acpi notification handler when zone is removed. Signed-off-by: Srinivas Pandruvada Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/int3403_thermal.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c index 479d754c3f5..0faf500d8a7 100644 --- a/drivers/thermal/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -301,6 +301,8 @@ static int int3403_sensor_remove(struct int3403_priv *priv) { struct int3403_sensor *obj = priv->priv; + acpi_remove_notify_handler(priv->adev->handle, + ACPI_DEVICE_NOTIFY, int3403_notify); thermal_zone_device_unregister(obj->tzone); return 0; } -- cgit v1.2.3-70-g09d2 From 74f47278cb056ffe1d261df3e094d608c3569829 Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Tue, 23 Dec 2014 16:20:36 -0800 Subject: vxlan: Fix double free of skb. In case of error vxlan_xmit_one() can free already freed skb. Also fixes memory leak of dst-entry. Fixes: acbf74a7630 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 49d9f229199..7fbd89fbe10 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1579,8 +1579,10 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, bool udp_sum = !udp_get_no_check6_tx(vs->sock->sk); skb = udp_tunnel_handle_offloads(skb, udp_sum); - if (IS_ERR(skb)) - return -EINVAL; + if (IS_ERR(skb)) { + err = -EINVAL; + goto err; + } skb_scrub_packet(skb, xnet); @@ -1590,12 +1592,16 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) - return err; + if (unlikely(err)) { + kfree_skb(skb); + goto err; + } skb = vlan_hwaccel_push_inside(skb); - if (WARN_ON(!skb)) - return -ENOMEM; + if (WARN_ON(!skb)) { + err = -ENOMEM; + goto err; + } vxh = (struct vxlanhdr *) __skb_push(skb, sizeof(*vxh)); vxh->vx_flags = htonl(VXLAN_FLAGS); @@ -1606,6 +1612,9 @@ static int vxlan6_xmit_skb(struct vxlan_sock *vs, udp_tunnel6_xmit_skb(vs->sock, dst, skb, dev, saddr, daddr, prio, ttl, src_port, dst_port); return 0; +err: + dst_release(dst); + return err; } #endif @@ -1621,7 +1630,7 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, skb = udp_tunnel_handle_offloads(skb, udp_sum); if (IS_ERR(skb)) - return -EINVAL; + return PTR_ERR(skb); min_headroom = LL_RESERVED_SPACE(rt->dst.dev) + rt->dst.header_len + VXLAN_HLEN + sizeof(struct iphdr) @@ -1629,8 +1638,10 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, /* Need space for new headers (invalidates iph ptr) */ err = skb_cow_head(skb, min_headroom); - if (unlikely(err)) + if (unlikely(err)) { + kfree_skb(skb); return err; + } skb = vlan_hwaccel_push_inside(skb); if (WARN_ON(!skb)) @@ -1776,9 +1787,12 @@ static void vxlan_xmit_one(struct sk_buff *skb, struct net_device *dev, tos, ttl, df, src_port, dst_port, htonl(vni << 8), !net_eq(vxlan->net, dev_net(vxlan->dev))); - - if (err < 0) + if (err < 0) { + /* skb is already freed. */ + skb = NULL; goto rt_tx_error; + } + iptunnel_xmit_stats(err, &dev->stats, dev->tstats); #if IS_ENABLED(CONFIG_IPV6) } else { -- cgit v1.2.3-70-g09d2 From 76fe5e95fac3c93bdff9102480e5ba823ba656c3 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Mon, 22 Dec 2014 11:35:15 -0800 Subject: spi: img-spfi: Increase DMA burst size A 1-byte burst size is rather inefficient and has been shown to cause TX issues during testing. Increase the DMA burst size to 4-bytes for both RX and TX DMA when using the 8-bit FIFO. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- drivers/spi/spi-img-spfi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index cd14556852b..aad6683db81 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -341,7 +341,7 @@ static int img_spfi_start_dma(struct spi_master *master, default: rxconf.src_addr = spfi->phys + SPFI_RX_8BIT_VALID_DATA; rxconf.src_addr_width = 1; - rxconf.src_maxburst = 1; + rxconf.src_maxburst = 4; } dmaengine_slave_config(spfi->rx_ch, &rxconf); @@ -368,7 +368,7 @@ static int img_spfi_start_dma(struct spi_master *master, default: txconf.dst_addr = spfi->phys + SPFI_TX_8BIT_VALID_DATA; txconf.dst_addr_width = 1; - txconf.dst_maxburst = 1; + txconf.dst_maxburst = 4; break; } dmaengine_slave_config(spfi->tx_ch, &txconf); -- cgit v1.2.3-70-g09d2 From dddd60220f41775e634258efd1b54c6fa81ce706 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 22 Dec 2014 19:10:17 +0100 Subject: ipw2200: select CFG80211_WEXT Commit 24a0aa212ee2 ("cfg80211: make WEXT compatibility unselectable") made it impossible to depend on CFG80211_WEXT. It does still allow to select that symbol. (Yes, the commit summary is confusing.) So make IPW2200 select CFG80211_WEXT, so that the ipw2200 driver can be enabled in config again. Signed-off-by: Paul Bolle Signed-off-by: Kalle Valo --- drivers/net/wireless/ipw2x00/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig index 91c0cb3c368..21de4fe6cf2 100644 --- a/drivers/net/wireless/ipw2x00/Kconfig +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -65,7 +65,8 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && CFG80211 && CFG80211_WEXT + depends on PCI && CFG80211 + select CFG80211_WEXT select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV -- cgit v1.2.3-70-g09d2 From 8975842bed0840f314281c9fbf021a1d29537cf0 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 23 Dec 2014 16:48:32 +0200 Subject: brcmfmac: Do not crash if platform data is not populated The driver looks for pdata->oob_irq_supported to find out if wowl can be supported. However, not all platforms populate pdata in which case we crash the kernel because of NULL pointer dereference. Fixes: 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") Reported-by: Christophe Prigent Signed-off-by: Mika Westerberg Signed-off-by: Kalle Valo --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 3c06e936594..9880dae2a56 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -1070,7 +1070,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, */ if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) && ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) || - (sdiodev->pdata->oob_irq_supported))) + (sdiodev->pdata && sdiodev->pdata->oob_irq_supported))) bus_if->wowl_supported = true; #endif @@ -1167,7 +1167,7 @@ static int brcmf_ops_sdio_resume(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; brcmf_dbg(SDIO, "Enter\n"); - if (sdiodev->pdata->oob_irq_supported) + if (sdiodev->pdata && sdiodev->pdata->oob_irq_supported) disable_irq_wake(sdiodev->pdata->oob_irq_nr); brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS); atomic_set(&sdiodev->suspend, false); -- cgit v1.2.3-70-g09d2 From d0e1df9cf4a98fac8508f1d73d0f3a147d6c2c85 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 23 Dec 2014 12:59:17 +0100 Subject: net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 Use generic config_init callback also for KSZ8021 and KSZ8031. This has been avoided this far due to commit b838b4aced99 ("phy/micrel: KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY becomes unresponsive if the broadcast-disable flag is set before configuring the clock mode. Turns out that the problem seemingly worked-around by the above mentioned commit was really due to a hardware-configuration issue, where the PHY was in fact strapped to address 3 rather than 0. Tested-by: Bruno Thomsen Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index c530de1e63f..3ad8ca76196 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -88,6 +88,7 @@ struct kszphy_priv { static const struct kszphy_type ksz8021_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, + .has_broadcast_disable = true, .has_rmii_ref_clk_sel = true, }; @@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } -static int ksz8021_config_init(struct phy_device *phydev) -{ - int rc; - - rc = kszphy_config_init(phydev); - if (rc) - return rc; - - rc = kszphy_broadcast_disable(phydev); - - return rc < 0 ? rc : 0; -} - static int ksz9021_load_values_from_of(struct phy_device *phydev, struct device_node *of_node, u16 reg, char *field1, char *field2, @@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, @@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = { .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, .driver_data = &ksz8021_type, .probe = kszphy_probe, - .config_init = ksz8021_config_init, + .config_init = kszphy_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, -- cgit v1.2.3-70-g09d2 From 16d8614b4f67fad7d12df34c53c9a1bab91fec49 Mon Sep 17 00:00:00 2001 From: Appana Durga Kedareswara Rao Date: Tue, 23 Dec 2014 18:07:55 +0530 Subject: net: xilinx: Remove unnecessary temac_property in the driver This property is no longer used in the code yet the code looks for it in the device tree. It does not cause an error if it's not in the tree. Signed-off-by: Kedareswara rao Appana Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 -- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 4 ---- 2 files changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 44b8d2bad8c..4c9b4fa1d3c 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -388,7 +388,6 @@ struct axidma_bd { * @dma_err_tasklet: Tasklet structure to process Axi DMA errors * @tx_irq: Axidma TX IRQ number * @rx_irq: Axidma RX IRQ number - * @temac_type: axienet type to identify between soft and hard temac * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X * @options: AxiEthernet option word * @last_link: Phy link state in which the PHY was negotiated earlier @@ -431,7 +430,6 @@ struct axienet_local { int tx_irq; int rx_irq; - u32 temac_type; u32 phy_type; u32 options; /* Current options word */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 4ea2d4e6f1d..c18a0c637c4 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1555,10 +1555,6 @@ static int axienet_of_probe(struct platform_device *op) if ((be32_to_cpup(p)) >= 0x4000) lp->jumbo_support = 1; } - p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", - NULL); - if (p) - lp->temac_type = be32_to_cpup(p); p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); if (p) lp->phy_type = be32_to_cpup(p); -- cgit v1.2.3-70-g09d2 From 6e4ab361b6f3eb41ffe63224a8b5770fc68ef710 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Tue, 23 Dec 2014 18:47:50 +0100 Subject: net: incorrect use of init_completion fixup The second init_completion call should be a reinit_completion here. patch is against 3.18.0 linux-next Signed-off-by: Nicholas Mc Guire Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 7d6aa8c87df..619083a860a 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -172,7 +172,7 @@ bnad_get_debug_drvinfo(struct bnad *bnad, void *buffer, u32 len) /* Retrieve flash partition info */ fcomp.comp_status = 0; - init_completion(&fcomp.comp); + reinit_completion(&fcomp.comp); spin_lock_irqsave(&bnad->bna_lock, flags); ret = bfa_nw_flash_get_attr(&bnad->bna.flash, &drvinfo->flash_attr, bnad_cb_completion, &fcomp); -- cgit v1.2.3-70-g09d2 From 5f35227ea34bb616c436d9da47fc325866c428f3 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Tue, 23 Dec 2014 22:37:26 -0800 Subject: net: Generalize ndo_gso_check to ndo_features_check GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert CC: Joe Stringer CC: Eric Dumazet CC: Hayes Wang Signed-off-by: Jesse Gross Acked-by: Tom Herbert Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 ++++--- drivers/net/ethernet/emulex/benet/be_main.c | 8 ++++--- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 10 +++++---- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 ++++--- include/linux/netdevice.h | 20 +++++++++-------- include/net/vxlan.h | 28 ++++++++++++++++++++---- net/core/dev.c | 23 +++++++++++-------- 7 files changed, 70 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 9f5e38769a2..72eef9fc883 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12553,9 +12553,11 @@ static int bnx2x_get_phys_port_id(struct net_device *netdev, return 0; } -static bool bnx2x_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t bnx2x_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } static const struct net_device_ops bnx2x_netdev_ops = { @@ -12589,7 +12591,7 @@ static const struct net_device_ops bnx2x_netdev_ops = { #endif .ndo_get_phys_port_id = bnx2x_get_phys_port_id, .ndo_set_vf_link_state = bnx2x_set_vf_link_state, - .ndo_gso_check = bnx2x_gso_check, + .ndo_features_check = bnx2x_features_check, }; static int bnx2x_set_coherency_mask(struct bnx2x *bp) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 196073110e3..41a0a5498da 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4459,9 +4459,11 @@ done: adapter->vxlan_port_count--; } -static bool be_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t be_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -4492,7 +4494,7 @@ static const struct net_device_ops be_netdev_ops = { #ifdef CONFIG_BE2NET_VXLAN .ndo_add_vxlan_port = be_add_vxlan_port, .ndo_del_vxlan_port = be_del_vxlan_port, - .ndo_gso_check = be_gso_check, + .ndo_features_check = be_features_check, #endif }; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 190cbd931f6..d0d6dc1b8e4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2365,9 +2365,11 @@ static void mlx4_en_del_vxlan_port(struct net_device *dev, queue_work(priv->mdev->workqueue, &priv->vxlan_del_task); } -static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t mlx4_en_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -2400,7 +2402,7 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; @@ -2434,7 +2436,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = { #ifdef CONFIG_MLX4_EN_VXLAN .ndo_add_vxlan_port = mlx4_en_add_vxlan_port, .ndo_del_vxlan_port = mlx4_en_del_vxlan_port, - .ndo_gso_check = mlx4_en_gso_check, + .ndo_features_check = mlx4_en_features_check, #endif }; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 1aa25b13ace..9929b97cfb3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -505,9 +505,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev, adapter->flags |= QLCNIC_DEL_VXLAN_PORT; } -static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev) +static netdev_features_t qlcnic_features_check(struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features) { - return vxlan_gso_check(skb); + return vxlan_features_check(skb, features); } #endif @@ -532,7 +534,7 @@ static const struct net_device_ops qlcnic_netdev_ops = { #ifdef CONFIG_QLCNIC_VXLAN .ndo_add_vxlan_port = qlcnic_add_vxlan_port, .ndo_del_vxlan_port = qlcnic_del_vxlan_port, - .ndo_gso_check = qlcnic_gso_check, + .ndo_features_check = qlcnic_features_check, #endif #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c31f74d76eb..679e6e90aa4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1012,12 +1012,15 @@ typedef u16 (*select_queue_fallback_t)(struct net_device *dev, * Callback to use for xmit over the accelerated station. This * is used in place of ndo_start_xmit on accelerated net * devices. - * bool (*ndo_gso_check) (struct sk_buff *skb, - * struct net_device *dev); + * netdev_features_t (*ndo_features_check) (struct sk_buff *skb, + * struct net_device *dev + * netdev_features_t features); * Called by core transmit path to determine if device is capable of - * performing GSO on a packet. The device returns true if it is - * able to GSO the packet, false otherwise. If the return value is - * false the stack will do software GSO. + * performing offload operations on a given packet. This is to give + * the device an opportunity to implement any restrictions that cannot + * be otherwise expressed by feature flags. The check is called with + * the set of features that the stack has calculated and it returns + * those the driver believes to be appropriate. * * int (*ndo_switch_parent_id_get)(struct net_device *dev, * struct netdev_phys_item_id *psid); @@ -1178,8 +1181,9 @@ struct net_device_ops { struct net_device *dev, void *priv); int (*ndo_get_lock_subclass)(struct net_device *dev); - bool (*ndo_gso_check) (struct sk_buff *skb, - struct net_device *dev); + netdev_features_t (*ndo_features_check) (struct sk_buff *skb, + struct net_device *dev, + netdev_features_t features); #ifdef CONFIG_NET_SWITCHDEV int (*ndo_switch_parent_id_get)(struct net_device *dev, struct netdev_phys_item_id *psid); @@ -3611,8 +3615,6 @@ static inline bool netif_needs_gso(struct net_device *dev, struct sk_buff *skb, netdev_features_t features) { return skb_is_gso(skb) && (!skb_gso_ok(skb, features) || - (dev->netdev_ops->ndo_gso_check && - !dev->netdev_ops->ndo_gso_check(skb, dev)) || unlikely((skb->ip_summed != CHECKSUM_PARTIAL) && (skb->ip_summed != CHECKSUM_UNNECESSARY))); } diff --git a/include/net/vxlan.h b/include/net/vxlan.h index 57cccd0052e..903461aa564 100644 --- a/include/net/vxlan.h +++ b/include/net/vxlan.h @@ -1,6 +1,9 @@ #ifndef __NET_VXLAN_H #define __NET_VXLAN_H 1 +#include +#include +#include #include #include #include @@ -51,16 +54,33 @@ int vxlan_xmit_skb(struct vxlan_sock *vs, __be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df, __be16 src_port, __be16 dst_port, __be32 vni, bool xnet); -static inline bool vxlan_gso_check(struct sk_buff *skb) +static inline netdev_features_t vxlan_features_check(struct sk_buff *skb, + netdev_features_t features) { - if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) && + u8 l4_hdr = 0; + + if (!skb->encapsulation) + return features; + + switch (vlan_get_protocol(skb)) { + case htons(ETH_P_IP): + l4_hdr = ip_hdr(skb)->protocol; + break; + case htons(ETH_P_IPV6): + l4_hdr = ipv6_hdr(skb)->nexthdr; + break; + default: + return features;; + } + + if ((l4_hdr == IPPROTO_UDP) && (skb->inner_protocol_type != ENCAP_TYPE_ETHER || skb->inner_protocol != htons(ETH_P_TEB) || (skb_inner_mac_header(skb) - skb_transport_header(skb) != sizeof(struct udphdr) + sizeof(struct vxlanhdr)))) - return false; + return features & ~(NETIF_F_ALL_CSUM | NETIF_F_GSO_MASK); - return true; + return features; } /* IP header + UDP + VXLAN + Ethernet header */ diff --git a/net/core/dev.c b/net/core/dev.c index 0094562b732..683d493aa1b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2563,7 +2563,7 @@ static netdev_features_t harmonize_features(struct sk_buff *skb, netdev_features_t netif_skb_features(struct sk_buff *skb) { - const struct net_device *dev = skb->dev; + struct net_device *dev = skb->dev; netdev_features_t features = dev->features; u16 gso_segs = skb_shinfo(skb)->gso_segs; __be16 protocol = skb->protocol; @@ -2571,13 +2571,20 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) if (gso_segs > dev->gso_max_segs || gso_segs < dev->gso_min_segs) features &= ~NETIF_F_GSO_MASK; + /* If encapsulation offload request, verify we are testing + * hardware encapsulation features instead of standard + * features for the netdev + */ + if (skb->encapsulation) + features &= dev->hw_enc_features; + if (!vlan_tx_tag_present(skb)) { if (unlikely(protocol == htons(ETH_P_8021Q) || protocol == htons(ETH_P_8021AD))) { struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; protocol = veh->h_vlan_encapsulated_proto; } else { - return harmonize_features(skb, features); + goto finalize; } } @@ -2595,6 +2602,11 @@ netdev_features_t netif_skb_features(struct sk_buff *skb) NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX); +finalize: + if (dev->netdev_ops->ndo_features_check) + features &= dev->netdev_ops->ndo_features_check(skb, dev, + features); + return harmonize_features(skb, features); } EXPORT_SYMBOL(netif_skb_features); @@ -2665,13 +2677,6 @@ static struct sk_buff *validate_xmit_skb(struct sk_buff *skb, struct net_device if (unlikely(!skb)) goto out_null; - /* If encapsulation offload request, verify we are testing - * hardware encapsulation features instead of standard - * features for the netdev - */ - if (skb->encapsulation) - features &= dev->hw_enc_features; - if (netif_needs_gso(dev, skb, features)) { struct sk_buff *segs; -- cgit v1.2.3-70-g09d2 From a22a9e4141474b9f314947f159817050a1db58d8 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 23 Dec 2014 09:24:36 +0800 Subject: bonding: change error message to debug message in __bond_release_one() In __bond_release_one(), when the interface is not a slave or not a slave of "this" master, it log error message. The message actually should be a debug message matching what bond_enslave() does. Signed-off-by: Wengang Wang Acked-by: Ding Tianhong Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 184c434ae30..0dceba1a2ba 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1648,7 +1648,7 @@ static int __bond_release_one(struct net_device *bond_dev, /* slave is not a slave or master is not master of this slave */ if (!(slave_dev->flags & IFF_SLAVE) || !netdev_has_upper_dev(slave_dev, bond_dev)) { - netdev_err(bond_dev, "cannot release %s\n", + netdev_dbg(bond_dev, "cannot release %s\n", slave_dev->name); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From eb69c5bf8273edbe1c5c748fa299b5e5a08f35d6 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 23 Dec 2014 11:29:03 +0800 Subject: ne2k-pci: Add pci_disable_device in error handling For linux-3.18.0 The driver lacks pci_disable_device in error handling code of ne2k_pci_init_one, so the device enabled by pci_enable_device is not disabled when errors occur. This patch fixes this problem. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/ne2k-pci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index 89c8d9fc97d..57e97910c72 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -246,13 +246,13 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); - return -ENODEV; + goto err_out; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); - return -EBUSY; + goto err_out; } reg0 = inb(ioaddr); @@ -392,6 +392,8 @@ err_out_free_netdev: free_netdev (dev); err_out_free_res: release_region (ioaddr, NE_IO_EXTENT); +err_out: + pci_disable_device(pdev); return -ENODEV; } -- cgit v1.2.3-70-g09d2 From cceeb872d60f77f9305d9e138c7d0acee1d60038 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Fri, 26 Dec 2014 15:41:42 -0800 Subject: Input: hil_kbd - fix incorrect use of init_completion The successive init_completion calls should be reinit_completion calls. Signed-off-by: Nicholas Mc Guire Acked-by: Helge Deller Tested-by: Helge Deller Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/hil_kbd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index 610a8af795a..5b152f25a8e 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -473,7 +473,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) if (error) goto bail1; - init_completion(&dev->cmd_done); + reinit_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); @@ -482,7 +482,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) if (error) goto bail1; - init_completion(&dev->cmd_done); + reinit_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); @@ -491,7 +491,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) if (error) goto bail1; - init_completion(&dev->cmd_done); + reinit_completion(&dev->cmd_done); serio_write(serio, 0); serio_write(serio, 0); serio_write(serio, HIL_PKT_CMD >> 8); -- cgit v1.2.3-70-g09d2 From 1616cf01a4455501836fee506ed340baa571b366 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 11 Dec 2014 16:05:09 +0200 Subject: OMAPDSS: HDMI: remove double initializer entries HDMI hardware parameters structs for OMAP4 and OMAP5 contained two initializers for 'clkdco_max'. The first one was a remnant with wrong value. Remove the extra initializer entries. Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/omap2/dss/hdmi_pll.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c index 87accdb59c8..ac83ef5cfd7 100644 --- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c +++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c @@ -132,7 +132,6 @@ static const struct dss_pll_hw dss_omap4_hdmi_pll_hw = { .mX_max = 127, .fint_min = 500000, .fint_max = 2500000, - .clkdco_max = 1800000000, .clkdco_min = 500000000, .clkdco_low = 1000000000, @@ -156,7 +155,6 @@ static const struct dss_pll_hw dss_omap5_hdmi_pll_hw = { .mX_max = 127, .fint_min = 620000, .fint_max = 2500000, - .clkdco_max = 1800000000, .clkdco_min = 750000000, .clkdco_low = 1500000000, -- cgit v1.2.3-70-g09d2 From 811174f45f5c586569f0574ef7ff8904d5b05420 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 17 Dec 2014 02:54:42 +0300 Subject: OMAPDSS: pll: NULL dereference in error handling The regulator_disable() doesn't accept NULL pointers. Signed-off-by: Dan Carpenter Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/omap2/dss/pll.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/omap2/dss/pll.c b/drivers/video/fbdev/omap2/dss/pll.c index 50bc62c5d36..335ffac224b 100644 --- a/drivers/video/fbdev/omap2/dss/pll.c +++ b/drivers/video/fbdev/omap2/dss/pll.c @@ -97,7 +97,8 @@ int dss_pll_enable(struct dss_pll *pll) return 0; err_enable: - regulator_disable(pll->regulator); + if (pll->regulator) + regulator_disable(pll->regulator); err_reg: clk_disable_unprepare(pll->clkin); return r; -- cgit v1.2.3-70-g09d2 From 92b004d1aa9f367c372511ca0330f58216b25703 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 18 Dec 2014 13:40:06 +0200 Subject: video/logo: prevent use of logos after they have been freed If the probe of an fb driver has been deferred due to missing dependencies, and the probe is later ran when a module is loaded, the fbdev framework will try to find a logo to use. However, the logos are __initdata, and have already been freed. This causes sometimes page faults, if the logo memory is not mapped, sometimes other random crashes as the logo data is invalid, and sometimes nothing, if the fbdev decides to reject the logo (e.g. the random value depicting the logo's height is too big). This patch adds a late_initcall function to mark the logos as freed. In reality the logos are freed later, and fbdev probe may be ran between this late_initcall and the freeing of the logos. In that case we will miss drawing the logo, even if it would be possible. Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org --- drivers/video/logo/logo.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c index 940cd196eef..10fbfd8ab96 100644 --- a/drivers/video/logo/logo.c +++ b/drivers/video/logo/logo.c @@ -21,6 +21,21 @@ static bool nologo; module_param(nologo, bool, 0); MODULE_PARM_DESC(nologo, "Disables startup logo"); +/* + * Logos are located in the initdata, and will be freed in kernel_init. + * Use late_init to mark the logos as freed to prevent any further use. + */ + +static bool logos_freed; + +static int __init fb_logo_late_init(void) +{ + logos_freed = true; + return 0; +} + +late_initcall(fb_logo_late_init); + /* logo's are marked __initdata. Use __init_refok to tell * modpost that it is intended that this function uses data * marked __initdata. @@ -29,7 +44,7 @@ const struct linux_logo * __init_refok fb_find_logo(int depth) { const struct linux_logo *logo = NULL; - if (nologo) + if (nologo || logos_freed) return NULL; if (depth >= 1) { -- cgit v1.2.3-70-g09d2 From 5d9a07b0de512b77bf28d2401e5fe3351f00a240 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 21 Dec 2014 01:00:23 +0200 Subject: vhost: relax used address alignment virtio 1.0 only requires used address to be 4 byte aligned, vhost required 8 bytes (size of vring_used_elem). Fix up vhost to match that. Additionally, while vhost correctly requires 8 byte alignment for log, it's unconnected to used ring: it's a consequence that log has u64 entries. Tweak code to make that clearer. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index ed71b5347a7..cb807d0ea49 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -713,9 +713,13 @@ long vhost_vring_ioctl(struct vhost_dev *d, int ioctl, void __user *argp) r = -EFAULT; break; } - if ((a.avail_user_addr & (sizeof *vq->avail->ring - 1)) || - (a.used_user_addr & (sizeof *vq->used->ring - 1)) || - (a.log_guest_addr & (sizeof *vq->used->ring - 1))) { + + /* Make sure it's safe to cast pointers to vring types. */ + BUILD_BUG_ON(__alignof__ *vq->avail > VRING_AVAIL_ALIGN_SIZE); + BUILD_BUG_ON(__alignof__ *vq->used > VRING_USED_ALIGN_SIZE); + if ((a.avail_user_addr & (VRING_AVAIL_ALIGN_SIZE - 1)) || + (a.used_user_addr & (VRING_USED_ALIGN_SIZE - 1)) || + (a.log_guest_addr & (sizeof(u64) - 1))) { r = -EINVAL; break; } -- cgit v1.2.3-70-g09d2 From 1c2d26e379fc8d37d55befd8589c4c252186ee58 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 17 Dec 2014 19:32:06 +0100 Subject: mmc: core: stop trying to switch width when only one bit is supported mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps. Return as soon as possible when those flags are not set Fixes: 577fb13199b1 (mmc: rework selection of bus speed mode) Signed-off-by: Alexandre Belloni Cc: # 3.17 Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 02ad79229f6..7466ce098e6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -886,7 +886,7 @@ static int mmc_select_bus_width(struct mmc_card *card) unsigned idx, bus_width = 0; int err = 0; - if (!mmc_can_ext_csd(card) && + if (!mmc_can_ext_csd(card) || !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) return 0; -- cgit v1.2.3-70-g09d2 From 30ea9c5218651bc11cbdba7820be78f04e2d83bc Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 19 Dec 2014 13:55:41 +0200 Subject: video/fbdev: fix defio's fsync fb_deferred_io_fsync() returns the value of schedule_delayed_work() as an error code, but schedule_delayed_work() does not return an error. It returns true/false depending on whether the work was already queued. Fix this by ignoring the return value of schedule_delayed_work(). Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org --- drivers/video/fbdev/core/fb_defio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/core/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c index 900aa4ecd61..d6cab1fd9a4 100644 --- a/drivers/video/fbdev/core/fb_defio.c +++ b/drivers/video/fbdev/core/fb_defio.c @@ -83,9 +83,10 @@ int fb_deferred_io_fsync(struct file *file, loff_t start, loff_t end, int datasy cancel_delayed_work_sync(&info->deferred_work); /* Run it immediately */ - err = schedule_delayed_work(&info->deferred_work, 0); + schedule_delayed_work(&info->deferred_work, 0); mutex_unlock(&inode->i_mutex); - return err; + + return 0; } EXPORT_SYMBOL_GPL(fb_deferred_io_fsync); -- cgit v1.2.3-70-g09d2 From a32442d4f8b712b701ea577c841d6a0a7c5993c1 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 29 Dec 2014 09:57:11 +0200 Subject: OMAPDSS: SDI: fix output port_num After the commit ef691ff48bc8 (OMAPDSS: DT: Get source endpoint by matching reg-id) we look for the SDI output using the port number. However, the SDI driver doesn't set the port number, which causes the SDI display to not initialize. Fix this by setting the SDI port number to 1. We use a hardcoded value, as SDI was used only on OMAP3 and it's always port number 1 there. Reported-by: Aaro Koskinen Reported-by: Pavel Machek Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/omap2/dss/sdi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c index d51a983075b..5c2ccab5a95 100644 --- a/drivers/video/fbdev/omap2/dss/sdi.c +++ b/drivers/video/fbdev/omap2/dss/sdi.c @@ -342,6 +342,8 @@ static void sdi_init_output(struct platform_device *pdev) out->output_type = OMAP_DISPLAY_TYPE_SDI; out->name = "sdi.0"; out->dispc_channel = OMAP_DSS_CHANNEL_LCD; + /* We have SDI only on OMAP3, where it's on port 1 */ + out->port_num = 1; out->ops.sdi = &sdi_ops; out->owner = THIS_MODULE; -- cgit v1.2.3-70-g09d2 From e461338b6cd4074e39a0d5fdd1dc5582fbca1520 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 5 Dec 2014 08:58:03 -0500 Subject: sd: tweak discard heuristics to work around QEMU SCSI issue 7985090aa020 changed the discard heuristics to give preference to the WRITE SAME commands that (unlike UNMAP) guarantee deterministic results. Ming Lei discovered that QEMU SCSI's WRITE SAME implementation internally relied on limits that were only communicated for the UNMAP case. And therefore discard commands backed by WRITE SAME would fail. Tweak the heuristics so we still pick UNMAP in the LBPRZ=0 case and only prefer the WRITE SAME variants if the device has the LBPRZ flag set. Reported-by: Ming Lei Tested-by: Ming Lei Signed-off-by: Martin K. Petersen Acked-by: Paolo Bonzini Signed-off-by: Christoph Hellwig --- drivers/scsi/sd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index fedab3c21dd..399516925d8 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2623,8 +2623,9 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) sd_config_discard(sdkp, SD_LBP_WS16); } else { /* LBP VPD page tells us what to use */ - - if (sdkp->lbpws) + if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz) + sd_config_discard(sdkp, SD_LBP_UNMAP); + else if (sdkp->lbpws) sd_config_discard(sdkp, SD_LBP_WS16); else if (sdkp->lbpws10) sd_config_discard(sdkp, SD_LBP_WS10); -- cgit v1.2.3-70-g09d2 From efc7a288382cffc76d6cdb9678f643db37991906 Mon Sep 17 00:00:00 2001 From: "Anil Chintalapati (achintal)" Date: Tue, 23 Dec 2014 19:40:00 +0000 Subject: fnic: IOMMU Fault occurs when IO and abort IO is out of order When I/O is aborted by mid-layer, fnic FW will complete the I/O before completing the abort task. In some cases abort request is completed before the I/O, which could lead to inconsistent driver and firmware states. In this case firmware reset would clear the inconsistent state. Signed-off-by: Anil Chintalapati Signed-off-by: Sesidhar Baddela Signed-off-by: Hiral Shah Signed-off-by: Christoph Hellwig --- drivers/scsi/fnic/fnic.h | 2 +- drivers/scsi/fnic/fnic_scsi.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index 3b73b96619e..26270c35162 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -39,7 +39,7 @@ #define DRV_NAME "fnic" #define DRV_DESCRIPTION "Cisco FCoE HBA Driver" -#define DRV_VERSION "1.6.0.16" +#define DRV_VERSION "1.6.0.17" #define PFX DRV_NAME ": " #define DFX DRV_NAME "%d: " diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 2097de42a14..155b286f1a9 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -1892,6 +1892,21 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) goto fnic_abort_cmd_end; } + /* IO out of order */ + + if (!(CMD_FLAGS(sc) & (FNIC_IO_ABORTED | FNIC_IO_DONE))) { + spin_unlock_irqrestore(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Issuing Host reset due to out of order IO\n"); + + if (fnic_host_reset(sc) == FAILED) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_host_reset failed.\n"); + } + ret = FAILED; + goto fnic_abort_cmd_end; + } + CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; /* -- cgit v1.2.3-70-g09d2 From 511833acfc06c013d453e288f483c682c60ffbff Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 21 Nov 2014 10:44:49 -0500 Subject: SCSI: fix regression in scsi_send_eh_cmnd() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit ac61d1955934 (scsi: set correct completion code in scsi_send_eh_cmnd()) introduced a bug. It changed the stored return value from a queuecommand call, but it didn't take into account that the return value was used again later on. This patch fixes the bug by changing the later usage. There is a big comment in the middle of scsi_send_eh_cmnd() which does a good job of explaining how the routine works. But it mentions a "rtn = FAILURE" value that doesn't exist in the code. This patch adjusts the code to match the comment (I assume the comment is right and the code is wrong). This fixes Bugzilla #88341. Signed-off-by: Alan Stern Reported-by: Андрей Аладьев Tested-by: Андрей Аладьев Fixes: ac61d19559349e205dad7b5122b281419aa74a82 Acked-by: Hannes Reinecke Cc: Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index e42fff6e8c1..8afb01604d5 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1041,7 +1041,7 @@ retry: } /* signal not to enter either branch of the if () below */ timeleft = 0; - rtn = NEEDS_RETRY; + rtn = FAILED; } else { timeleft = wait_for_completion_timeout(&done, timeout); rtn = SUCCESS; @@ -1081,7 +1081,7 @@ retry: rtn = FAILED; break; } - } else if (!rtn) { + } else if (rtn != FAILED) { scsi_abort_eh_cmnd(scmd); rtn = FAILED; } -- cgit v1.2.3-70-g09d2 From 7f4054836d811c650c51f9c93088f8ebd61b0020 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 31 Dec 2014 12:59:34 -0800 Subject: Revert "Input: atmel_mxt_ts - use deep sleep mode when stopped" This reverts commit 9d469d033d135d80742a4e39e6bbb4519dd5eee1. It breaks the Chromebook Pixel touchpad (and touchscreen). Reported-by: Dirk Hohndel Bisected-by: Linus Torvalds Cc: Nick Dyer Cc: Benson Leung Cc: Yufeng Shen Cc: Dmitry Torokhov Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Linus Torvalds --- drivers/input/touchscreen/atmel_mxt_ts.c | 99 +++++++++----------------------- 1 file changed, 26 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index bb070206223..95ee92a91bd 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -99,13 +99,9 @@ #define MXT_T6_STATUS_COMSERR (1 << 2) /* MXT_GEN_POWER_T7 field */ -struct t7_config { - u8 idle; - u8 active; -} __packed; - -#define MXT_POWER_CFG_RUN 0 -#define MXT_POWER_CFG_DEEPSLEEP 1 +#define MXT_POWER_IDLEACQINT 0 +#define MXT_POWER_ACTVACQINT 1 +#define MXT_POWER_ACTV2IDLETO 2 /* MXT_GEN_ACQUIRE_T8 field */ #define MXT_ACQUIRE_CHRGTIME 0 @@ -117,6 +113,7 @@ struct t7_config { #define MXT_ACQUIRE_ATCHCALSTHR 7 /* MXT_TOUCH_MULTI_T9 field */ +#define MXT_TOUCH_CTRL 0 #define MXT_T9_ORIENT 9 #define MXT_T9_RANGE 18 @@ -256,7 +253,6 @@ struct mxt_data { bool update_input; u8 last_message_count; u8 num_touchids; - struct t7_config t7_cfg; /* Cached parameters from object table */ u16 T5_address; @@ -672,6 +668,20 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg) data->t6_status = status; } +static int mxt_write_object(struct mxt_data *data, + u8 type, u8 offset, u8 val) +{ + struct mxt_object *object; + u16 reg; + + object = mxt_get_object(data, type); + if (!object || offset >= mxt_obj_size(object)) + return -EINVAL; + + reg = object->start_address; + return mxt_write_reg(data->client, reg + offset, val); +} + static void mxt_input_button(struct mxt_data *data, u8 *message) { struct input_dev *input = data->input_dev; @@ -1742,60 +1752,6 @@ err_free_object_table: return error; } -static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep) -{ - struct device *dev = &data->client->dev; - int error; - struct t7_config *new_config; - struct t7_config deepsleep = { .active = 0, .idle = 0 }; - - if (sleep == MXT_POWER_CFG_DEEPSLEEP) - new_config = &deepsleep; - else - new_config = &data->t7_cfg; - - error = __mxt_write_reg(data->client, data->T7_address, - sizeof(data->t7_cfg), new_config); - if (error) - return error; - - dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n", - new_config->active, new_config->idle); - - return 0; -} - -static int mxt_init_t7_power_cfg(struct mxt_data *data) -{ - struct device *dev = &data->client->dev; - int error; - bool retry = false; - -recheck: - error = __mxt_read_reg(data->client, data->T7_address, - sizeof(data->t7_cfg), &data->t7_cfg); - if (error) - return error; - - if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) { - if (!retry) { - dev_dbg(dev, "T7 cfg zero, resetting\n"); - mxt_soft_reset(data); - retry = true; - goto recheck; - } else { - dev_dbg(dev, "T7 cfg zero after reset, overriding\n"); - data->t7_cfg.active = 20; - data->t7_cfg.idle = 100; - return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); - } - } - - dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n", - data->t7_cfg.active, data->t7_cfg.idle); - return 0; -} - static int mxt_configure_objects(struct mxt_data *data, const struct firmware *cfg) { @@ -1809,12 +1765,6 @@ static int mxt_configure_objects(struct mxt_data *data, dev_warn(dev, "Error %d updating config\n", error); } - error = mxt_init_t7_power_cfg(data); - if (error) { - dev_err(dev, "Failed to initialize power cfg\n"); - return error; - } - error = mxt_initialize_t9_input_device(data); if (error) return error; @@ -2093,15 +2043,16 @@ static const struct attribute_group mxt_attr_group = { static void mxt_start(struct mxt_data *data) { - mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN); - - /* Recalibrate since chip has been in deep sleep */ - mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false); + /* Touch enable */ + mxt_write_object(data, + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); } static void mxt_stop(struct mxt_data *data) { - mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP); + /* Touch disable */ + mxt_write_object(data, + MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); } static int mxt_input_open(struct input_dev *dev) @@ -2266,6 +2217,8 @@ static int __maybe_unused mxt_resume(struct device *dev) struct mxt_data *data = i2c_get_clientdata(client); struct input_dev *input_dev = data->input_dev; + mxt_soft_reset(data); + mutex_lock(&input_dev->mutex); if (input_dev->users) -- cgit v1.2.3-70-g09d2 From af8f3f514d193eb353f9b6cea503c55d074e6153 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Sun, 4 Jan 2015 18:55:02 +0800 Subject: ACPI / processor: Convert apic_id to phys_id to make it arch agnostic apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_processor.c | 21 +++++++++------- drivers/acpi/processor_core.c | 56 +++++++++++++++++++++---------------------- include/acpi/processor.h | 8 +++---- 3 files changed, 44 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 1fdf5e07a1c..f02b29eb0fd 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) acpi_status status; int ret; - if (pr->apic_id == -1) + if (pr->phys_id == -1) return -ENODEV; status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); @@ -180,7 +180,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) cpu_maps_update_begin(); cpu_hotplug_begin(); - ret = acpi_map_lsapic(pr->handle, pr->apic_id, &pr->id); + ret = acpi_map_lsapic(pr->handle, pr->phys_id, &pr->id); if (ret) goto out; @@ -215,7 +215,7 @@ static int acpi_processor_get_info(struct acpi_device *device) union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; struct acpi_processor *pr = acpi_driver_data(device); - int apic_id, cpu_index, device_declaration = 0; + int phys_id, cpu_index, device_declaration = 0; acpi_status status = AE_OK; static int cpu0_initialized; unsigned long long value; @@ -262,15 +262,18 @@ static int acpi_processor_get_info(struct acpi_device *device) pr->acpi_id = value; } - apic_id = acpi_get_apicid(pr->handle, device_declaration, pr->acpi_id); - if (apic_id < 0) - acpi_handle_debug(pr->handle, "failed to get CPU APIC ID.\n"); - pr->apic_id = apic_id; + phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id); + if (phys_id < 0) + acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n"); + pr->phys_id = phys_id; - cpu_index = acpi_map_cpuid(pr->apic_id, pr->acpi_id); + cpu_index = acpi_map_cpuid(pr->phys_id, pr->acpi_id); if (!cpu0_initialized && !acpi_has_cpu_in_madt()) { cpu0_initialized = 1; - /* Handle UP system running SMP kernel, with no LAPIC in MADT */ + /* + * Handle UP system running SMP kernel, with no CPU + * entry in MADT + */ if ((cpu_index == -1) && (num_online_cpus() == 1)) cpu_index = 0; } diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 342942f90a1..02e48394276 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -69,7 +69,7 @@ static int map_madt_entry(int type, u32 acpi_id) unsigned long madt_end, entry; static struct acpi_table_madt *madt; static int read_madt; - int apic_id = -1; + int phys_id = -1; /* CPU hardware ID */ if (!read_madt) { if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0, @@ -79,7 +79,7 @@ static int map_madt_entry(int type, u32 acpi_id) } if (!madt) - return apic_id; + return phys_id; entry = (unsigned long)madt; madt_end = entry + madt->header.length; @@ -91,18 +91,18 @@ static int map_madt_entry(int type, u32 acpi_id) struct acpi_subtable_header *header = (struct acpi_subtable_header *)entry; if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { - if (!map_lapic_id(header, acpi_id, &apic_id)) + if (!map_lapic_id(header, acpi_id, &phys_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) { - if (!map_x2apic_id(header, type, acpi_id, &apic_id)) + if (!map_x2apic_id(header, type, acpi_id, &phys_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (!map_lsapic_id(header, type, acpi_id, &apic_id)) + if (!map_lsapic_id(header, type, acpi_id, &phys_id)) break; } entry += header->length; } - return apic_id; + return phys_id; } static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) @@ -110,7 +110,7 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_subtable_header *header; - int apic_id = -1; + int phys_id = -1; if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) goto exit; @@ -126,38 +126,38 @@ static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) header = (struct acpi_subtable_header *)obj->buffer.pointer; if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) - map_lapic_id(header, acpi_id, &apic_id); + map_lapic_id(header, acpi_id, &phys_id); else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) - map_lsapic_id(header, type, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &phys_id); else if (header->type == ACPI_MADT_TYPE_LOCAL_X2APIC) - map_x2apic_id(header, type, acpi_id, &apic_id); + map_x2apic_id(header, type, acpi_id, &phys_id); exit: kfree(buffer.pointer); - return apic_id; + return phys_id; } -int acpi_get_apicid(acpi_handle handle, int type, u32 acpi_id) +int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) { - int apic_id; + int phys_id; - apic_id = map_mat_entry(handle, type, acpi_id); - if (apic_id == -1) - apic_id = map_madt_entry(type, acpi_id); + phys_id = map_mat_entry(handle, type, acpi_id); + if (phys_id == -1) + phys_id = map_madt_entry(type, acpi_id); - return apic_id; + return phys_id; } -int acpi_map_cpuid(int apic_id, u32 acpi_id) +int acpi_map_cpuid(int phys_id, u32 acpi_id) { #ifdef CONFIG_SMP int i; #endif - if (apic_id == -1) { + if (phys_id == -1) { /* * On UP processor, there is no _MAT or MADT table. - * So above apic_id is always set to -1. + * So above phys_id is always set to -1. * * BIOS may define multiple CPU handles even for UP processor. * For example, @@ -170,7 +170,7 @@ int acpi_map_cpuid(int apic_id, u32 acpi_id) * Processor (CPU3, 0x03, 0x00000410, 0x06) {} * } * - * Ignores apic_id and always returns 0 for the processor + * Ignores phys_id and always returns 0 for the processor * handle with acpi id 0 if nr_cpu_ids is 1. * This should be the case if SMP tables are not found. * Return -1 for other CPU's handle. @@ -178,28 +178,28 @@ int acpi_map_cpuid(int apic_id, u32 acpi_id) if (nr_cpu_ids <= 1 && acpi_id == 0) return acpi_id; else - return apic_id; + return phys_id; } #ifdef CONFIG_SMP for_each_possible_cpu(i) { - if (cpu_physical_id(i) == apic_id) + if (cpu_physical_id(i) == phys_id) return i; } #else /* In UP kernel, only processor 0 is valid */ - if (apic_id == 0) - return apic_id; + if (phys_id == 0) + return phys_id; #endif return -1; } int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) { - int apic_id; + int phys_id; - apic_id = acpi_get_apicid(handle, type, acpi_id); + phys_id = acpi_get_phys_id(handle, type, acpi_id); - return acpi_map_cpuid(apic_id, acpi_id); + return acpi_map_cpuid(phys_id, acpi_id); } EXPORT_SYMBOL_GPL(acpi_get_cpuid); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 3ca9b751f12..b95dc32a6e6 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -196,8 +196,8 @@ struct acpi_processor_flags { struct acpi_processor { acpi_handle handle; u32 acpi_id; - u32 apic_id; - u32 id; + u32 phys_id; /* CPU hardware ID such as APIC ID for x86 */ + u32 id; /* CPU logical ID allocated by OS */ u32 pblk; int performance_platform_limit; int throttling_platform_limit; @@ -310,8 +310,8 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) #endif /* CONFIG_CPU_FREQ */ /* in processor_core.c */ -int acpi_get_apicid(acpi_handle, int type, u32 acpi_id); -int acpi_map_cpuid(int apic_id, u32 acpi_id); +int acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); +int acpi_map_cpuid(int phys_id, u32 acpi_id); int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); /* in processor_pdc.c */ -- cgit v1.2.3-70-g09d2 From d02dc27db0dc74683efc4a2b36f55f5594451f38 Mon Sep 17 00:00:00 2001 From: Hanjun Guo Date: Sun, 4 Jan 2015 18:55:03 +0800 Subject: ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu() acpi_map_lsapic() will allocate a logical CPU number and map it to physical CPU id (such as APIC id) for the hot-added CPU, it will also do some mapping for NUMA node id and etc, acpi_unmap_lsapic() will do the reverse. We can see that the name of the function is a little bit confusing and arch (IA64) dependent so rename them as acpi_(un)map_cpu() to make arch agnostic and explicit. Signed-off-by: Hanjun Guo Signed-off-by: Rafael J. Wysocki --- arch/ia64/kernel/acpi.c | 9 ++++----- arch/x86/kernel/acpi/boot.c | 9 ++++----- drivers/acpi/acpi_processor.c | 6 +++--- include/linux/acpi.h | 4 ++-- 4 files changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 615ef81def4..e795cb84815 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -893,13 +893,13 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) +int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) { return _acpi_map_lsapic(handle, physid, pcpu); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_cpu); -int acpi_unmap_lsapic(int cpu) +int acpi_unmap_cpu(int cpu) { ia64_cpu_to_sapicid[cpu] = -1; set_cpu_present(cpu, false); @@ -910,8 +910,7 @@ int acpi_unmap_lsapic(int cpu) return (0); } - -EXPORT_SYMBOL(acpi_unmap_lsapic); +EXPORT_SYMBOL(acpi_unmap_cpu); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 4433a4be817..d1626364a28 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -750,13 +750,13 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) +int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu) { return _acpi_map_lsapic(handle, physid, pcpu); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_cpu); -int acpi_unmap_lsapic(int cpu) +int acpi_unmap_cpu(int cpu) { #ifdef CONFIG_ACPI_NUMA set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE); @@ -768,8 +768,7 @@ int acpi_unmap_lsapic(int cpu) return (0); } - -EXPORT_SYMBOL(acpi_unmap_lsapic); +EXPORT_SYMBOL(acpi_unmap_cpu); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index f02b29eb0fd..1020b1b53a1 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -180,13 +180,13 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) cpu_maps_update_begin(); cpu_hotplug_begin(); - ret = acpi_map_lsapic(pr->handle, pr->phys_id, &pr->id); + ret = acpi_map_cpu(pr->handle, pr->phys_id, &pr->id); if (ret) goto out; ret = arch_register_cpu(pr->id); if (ret) { - acpi_unmap_lsapic(pr->id); + acpi_unmap_cpu(pr->id); goto out; } @@ -461,7 +461,7 @@ static void acpi_processor_remove(struct acpi_device *device) /* Remove the CPU. */ arch_unregister_cpu(pr->id); - acpi_unmap_lsapic(pr->id); + acpi_unmap_cpu(pr->id); cpu_hotplug_done(); cpu_maps_update_done(); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 856d381b1d5..d459cd17b47 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -147,8 +147,8 @@ void acpi_numa_arch_fixup(void); #ifdef CONFIG_ACPI_HOTPLUG_CPU /* Arch dependent functions for cpu hotplug support */ -int acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu); -int acpi_unmap_lsapic(int cpu); +int acpi_map_cpu(acpi_handle handle, int physid, int *pcpu); +int acpi_unmap_cpu(int cpu); #endif /* CONFIG_ACPI_HOTPLUG_CPU */ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); -- cgit v1.2.3-70-g09d2 From 6a3ef10bacb08860805e9053f919786dc34760ba Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 5 Jan 2015 08:57:04 +0100 Subject: ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X The L521X variant of the Dell XPS15 has integrated nvidia graphics, and backlight control does not work properly when using the native interfaces. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1163574 Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index c72e79d2c5a..032db459370 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -522,6 +522,16 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"), }, }, + + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */ + .callback = video_disable_native_backlight, + .ident = "Dell XPS15 L521X", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"), + }, + }, {} }; -- cgit v1.2.3-70-g09d2