From 7a6f4369449a471a6e5718a87c53ac75a46960ba Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 27 Sep 2006 16:03:31 -0700 Subject: [TG3]: Add tg3_poll_fw(). Put the firmware polling logic into a separate function. This makes the code cleaner. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 54 +++++++++++++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d443b737232..eafca2a0dd0 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4662,6 +4662,35 @@ static void tg3_write_sig_legacy(struct tg3 *tp, int kind) } } +static int tg3_poll_fw(struct tg3 *tp) +{ + int i; + u32 val; + + /* Wait for firmware initialization to complete. */ + for (i = 0; i < 100000; i++) { + tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); + if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) + break; + udelay(10); + } + + /* Chip might not be fitted with firmware. Some Sun onboard + * parts are configured like that. So don't signal the timeout + * of the above loop as an error, but do report the lack of + * running firmware once. + */ + if (i >= 100000 && + !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { + tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; + + printk(KERN_INFO PFX "%s: No firmware running.\n", + tp->dev->name); + } + + return 0; +} + static void tg3_stop_fw(struct tg3 *); /* tp->lock is held. */ @@ -4669,7 +4698,7 @@ static int tg3_chip_reset(struct tg3 *tp) { u32 val; void (*write_op)(struct tg3 *, u32, u32); - int i; + int err; tg3_nvram_lock(tp); @@ -4829,26 +4858,9 @@ static int tg3_chip_reset(struct tg3 *tp) tw32_f(MAC_MODE, 0); udelay(40); - /* Wait for firmware initialization to complete. */ - for (i = 0; i < 100000; i++) { - tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); - if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) - break; - udelay(10); - } - - /* Chip might not be fitted with firmare. Some Sun onboard - * parts are configured like that. So don't signal the timeout - * of the above loop as an error, but do report the lack of - * running firmware once. - */ - if (i >= 100000 && - !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { - tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; - - printk(KERN_INFO PFX "%s: No firmware running.\n", - tp->dev->name); - } + err = tg3_poll_fw(tp); + if (err) + return err; if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) { -- cgit v1.2.3-70-g09d2