From 7be1f6b9a1ae3476a424380b52aad7c14c3273ab Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 28 Aug 2012 11:34:13 +0200 Subject: mtd: cfi_cmdset_0001: Fix problem with unlocking timeout Unlocking may take up to 1.4 seconds on some Intel flashes. So lets use a max. of 1.5 seconds (1500ms) as timeout. See "Clear Block Lock-Bits Time" on page 40 in "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual from February 2003 This patch also fixes some other problems with this timeout: - Don't use HZ in timeout "calculation"! While testing we noticed that an unlocking timeout occured with HZ=1000 and didn't occur with HZ=300. This was because the timeout parameter was calculated differently depending on the HZ value. Now a fixed value of 1500ms is used. - The last parameter of WAIT_TIMEOUT (defined to inval_cache_and_wait_for_operation) has to be passed in micro-seconds. So multiply the ms value with 1000 and not 100 to calculate this value. - Use variable name "mdelay" instead of misleading "udelay". Signed-off-by: Stefan Roese Tested-by: Stephan Gatzka Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index dbbd2edfb81..77514430f1f 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -2043,7 +2043,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *extp = cfi->cmdset_priv; - int udelay; + int mdelay; int ret; adr += chip->start; @@ -2072,9 +2072,17 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip * If Instant Individual Block Locking supported then no need * to delay. */ - udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0; + /* + * Unlocking may take up to 1.4 seconds on some Intel flashes. So + * lets use a max of 1.5 seconds (1500ms) as timeout. + * + * See "Clear Block Lock-Bits Time" on page 40 in + * "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual + * from February 2003 + */ + mdelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1500 : 0; - ret = WAIT_TIMEOUT(map, chip, adr, udelay, udelay * 100); + ret = WAIT_TIMEOUT(map, chip, adr, mdelay, mdelay * 1000); if (ret) { map_write(map, CMD(0x70), adr); chip->state = FL_STATUS; -- cgit v1.2.3-70-g09d2